Surrogate models for sheet metal stamping problem based on the combination of proper orthogonal decomposition and radial basis function

NASA Astrophysics Data System (ADS)

Dang, Van Tuan; Lafon, Pascal; Labergere, Carl

2017-10-01

In this work, a combination of Proper Orthogonal Decomposition (POD) and Radial Basis Function (RBF) is proposed to build a surrogate model based on the Benchmark Springback 3D bending from the Numisheet2011 congress. The influence of the two design parameters, the geometrical parameter of the die radius and the process parameter of the blank holder force, on the springback of the sheet after a stamping operation is analyzed. The classical Design of Experience (DoE) uses Full Factorial to design the parameter space with sample points as input data for finite element method (FEM) numerical simulation of the sheet metal stamping process. The basic idea is to consider the design parameters as additional dimensions for the solution of the displacement fields. The order of the resultant high-fidelity model is reduced through the use of POD method which performs model space reduction and results in the basis functions of the low order model. Specifically, the snapshot method is used in our work, in which the basis functions is derived from snapshot deviation of the matrix of the final displacements fields of the FEM numerical simulation. The obtained basis functions are then used to determine the POD coefficients and RBF is used for the interpolation of these POD coefficients over the parameter space. Finally, the presented POD-RBF approach which is used for shape optimization can be performed with high accuracy.

Krylov-Subspace Recycling via the POD-Augmented Conjugate-Gradient Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlberg, Kevin; Forstall, Virginia; Tuminaro, Ray

This paper presents a new Krylov-subspace-recycling method for efficiently solving sequences of linear systems of equations characterized by varying right-hand sides and symmetric-positive-definite matrices. As opposed to typical truncation strategies used in recycling such as deflation, we propose a truncation method inspired by goal-oriented proper orthogonal decomposition (POD) from model reduction. This idea is based on the observation that model reduction aims to compute a low-dimensional subspace that contains an accurate solution; as such, we expect the proposed method to generate a low-dimensional subspace that is well suited for computing solutions that can satisfy inexact tolerances. In particular, we proposemore » specific goal-oriented POD `ingredients' that align the optimality properties of POD with the objective of Krylov-subspace recycling. To compute solutions in the resulting 'augmented' POD subspace, we propose a hybrid direct/iterative three-stage method that leverages 1) the optimal ordering of POD basis vectors, and 2) well-conditioned reduced matrices. Numerical experiments performed on solid-mechanics problems highlight the benefits of the proposed method over existing approaches for Krylov-subspace recycling.« less

Krylov-Subspace Recycling via the POD-Augmented Conjugate-Gradient Method

DOE PAGES

Carlberg, Kevin; Forstall, Virginia; Tuminaro, Ray

2016-01-01

This paper presents a new Krylov-subspace-recycling method for efficiently solving sequences of linear systems of equations characterized by varying right-hand sides and symmetric-positive-definite matrices. As opposed to typical truncation strategies used in recycling such as deflation, we propose a truncation method inspired by goal-oriented proper orthogonal decomposition (POD) from model reduction. This idea is based on the observation that model reduction aims to compute a low-dimensional subspace that contains an accurate solution; as such, we expect the proposed method to generate a low-dimensional subspace that is well suited for computing solutions that can satisfy inexact tolerances. In particular, we proposemore » specific goal-oriented POD `ingredients' that align the optimality properties of POD with the objective of Krylov-subspace recycling. To compute solutions in the resulting 'augmented' POD subspace, we propose a hybrid direct/iterative three-stage method that leverages 1) the optimal ordering of POD basis vectors, and 2) well-conditioned reduced matrices. Numerical experiments performed on solid-mechanics problems highlight the benefits of the proposed method over existing approaches for Krylov-subspace recycling.« less

Development of Boundary Condition Independent Reduced Order Thermal Models using Proper Orthogonal Decomposition

NASA Astrophysics Data System (ADS)

Raghupathy, Arun; Ghia, Karman; Ghia, Urmila

2008-11-01

Compact Thermal Models (CTM) to represent IC packages has been traditionally developed using the DELPHI-based (DEvelopment of Libraries of PHysical models for an Integrated design) methodology. The drawbacks of this method are presented, and an alternative method is proposed. A reduced-order model that provides the complete thermal information accurately with less computational resources can be effectively used in system level simulations. Proper Orthogonal Decomposition (POD), a statistical method, can be used to reduce the order of the degree of freedom or variables of the computations for such a problem. POD along with the Galerkin projection allows us to create reduced-order models that reproduce the characteristics of the system with a considerable reduction in computational resources while maintaining a high level of accuracy. The goal of this work is to show that this method can be applied to obtain a boundary condition independent reduced-order thermal model for complex components. The methodology is applied to the 1D transient heat equation.

System Identification and POD Method Applied to Unsteady Aerodynamics

NASA Technical Reports Server (NTRS)

Tang, Deman; Kholodar, Denis; Juang, Jer-Nan; Dowell, Earl H.

2001-01-01

The representation of unsteady aerodynamic flow fields in terms of global aerodynamic modes has proven to be a useful method for reducing the size of the aerodynamic model over those representations that use local variables at discrete grid points in the flow field. Eigenmodes and Proper Orthogonal Decomposition (POD) modes have been used for this purpose with good effect. This suggests that system identification models may also be used to represent the aerodynamic flow field. Implicit in the use of a systems identification technique is the notion that a relative small state space model can be useful in describing a dynamical system. The POD model is first used to show that indeed a reduced order model can be obtained from a much larger numerical aerodynamical model (the vortex lattice method is used for illustrative purposes) and the results from the POD and the system identification methods are then compared. For the example considered, the two methods are shown to give comparable results in terms of accuracy and reduced model size. The advantages and limitations of each approach are briefly discussed. Both appear promising and complementary in their characteristics.

Investigation of probabilistic principal component analysis compared to proper orthogonal decomposition methods for basis extraction and missing data estimation

NASA Astrophysics Data System (ADS)

Lee, Kyunghoon

To evaluate the maximum likelihood estimates (MLEs) of probabilistic principal component analysis (PPCA) parameters such as a factor-loading, PPCA can invoke an expectation-maximization (EM) algorithm, yielding an EM algorithm for PPCA (EM-PCA). In order to examine the benefits of the EM-PCA for aerospace engineering applications, this thesis attempts to qualitatively and quantitatively scrutinize the EM-PCA alongside both POD and gappy POD using high-dimensional simulation data. In pursuing qualitative investigations, the theoretical relationship between POD and PPCA is transparent such that the factor-loading MLE of PPCA, evaluated by the EM-PCA, pertains to an orthogonal basis obtained by POD. By contrast, the analytical connection between gappy POD and the EM-PCA is nebulous because they distinctively approximate missing data due to their antithetical formulation perspectives: gappy POD solves a least-squares problem whereas the EM-PCA relies on the expectation of the observation probability model. To juxtapose both gappy POD and the EM-PCA, this research proposes a unifying least-squares perspective that embraces the two disparate algorithms within a generalized least-squares framework. As a result, the unifying perspective reveals that both methods address similar least-squares problems; however, their formulations contain dissimilar bases and norms. Furthermore, this research delves into the ramifications of the different bases and norms that will eventually characterize the traits of both methods. To this end, two hybrid algorithms of gappy POD and the EM-PCA are devised and compared to the original algorithms for a qualitative illustration of the different basis and norm effects. After all, a norm reflecting a curve-fitting method is found to more significantly affect estimation error reduction than a basis for two example test data sets: one is absent of data only at a single snapshot and the other misses data across all the snapshots. From a numerical performance aspect, the EM-PCA is computationally less efficient than POD for intact data since it suffers from slow convergence inherited from the EM algorithm. For incomplete data, this thesis quantitatively found that the number of data missing snapshots predetermines whether the EM-PCA or gappy POD outperforms the other because of the computational cost of a coefficient evaluation, resulting from a norm selection. For instance, gappy POD demands laborious computational effort in proportion to the number of data-missing snapshots as a consequence of the gappy norm. In contrast, the computational cost of the EM-PCA is invariant to the number of data-missing snapshots thanks to the L2 norm. In general, the higher the number of data-missing snapshots, the wider the gap between the computational cost of gappy POD and the EM-PCA. Based on the numerical experiments reported in this thesis, the following criterion is recommended regarding the selection between gappy POD and the EM-PCA for computational efficiency: gappy POD for an incomplete data set containing a few data-missing snapshots and the EM-PCA for an incomplete data set involving multiple data-missing snapshots. Last, the EM-PCA is applied to two aerospace applications in comparison to gappy POD as a proof of concept: one with an emphasis on basis extraction and the other with a focus on missing data reconstruction for a given incomplete data set with scattered missing data. The first application exploits the EM-PCA to efficiently construct reduced-order models of engine deck responses obtained by the numerical propulsion system simulation (NPSS), some of whose results are absent due to failed analyses caused by numerical instability. Model-prediction tests validate that engine performance metrics estimated by the reduced-order NPSS model exhibit considerably good agreement with those directly obtained by NPSS. Similarly, the second application illustrates that the EM-PCA is significantly more cost effective than gappy POD at repairing spurious PIV measurements obtained from acoustically-excited, bluff-body jet flow experiments. The EM-PCA reduces computational cost on factors 8 ˜ 19 compared to gappy POD while generating the same restoration results as those evaluated by gappy POD. All in all, through comprehensive theoretical and numerical investigation, this research establishes that the EM-PCA is an efficient alternative to gappy POD for an incomplete data set containing missing data over an entire data set. (Abstract shortened by UMI.)

Proper orthogonal decomposition-based spectral higher-order stochastic estimation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baars, Woutijn J., E-mail: wbaars@unimelb.edu.au; Tinney, Charles E.

A unique routine, capable of identifying both linear and higher-order coherence in multiple-input/output systems, is presented. The technique combines two well-established methods: Proper Orthogonal Decomposition (POD) and Higher-Order Spectra Analysis. The latter of these is based on known methods for characterizing nonlinear systems by way of Volterra series. In that, both linear and higher-order kernels are formed to quantify the spectral (nonlinear) transfer of energy between the system's input and output. This reduces essentially to spectral Linear Stochastic Estimation when only first-order terms are considered, and is therefore presented in the context of stochastic estimation as spectral Higher-Order Stochastic Estimationmore » (HOSE). The trade-off to seeking higher-order transfer kernels is that the increased complexity restricts the analysis to single-input/output systems. Low-dimensional (POD-based) analysis techniques are inserted to alleviate this void as POD coefficients represent the dynamics of the spatial structures (modes) of a multi-degree-of-freedom system. The mathematical framework behind this POD-based HOSE method is first described. The method is then tested in the context of jet aeroacoustics by modeling acoustically efficient large-scale instabilities as combinations of wave packets. The growth, saturation, and decay of these spatially convecting wave packets are shown to couple both linearly and nonlinearly in the near-field to produce waveforms that propagate acoustically to the far-field for different frequency combinations.« less

Persistent model order reduction for complex dynamical systems using smooth orthogonal decomposition

NASA Astrophysics Data System (ADS)

Ilbeigi, Shahab; Chelidze, David

2017-11-01

Full-scale complex dynamic models are not effective for parametric studies due to the inherent constraints on available computational power and storage resources. A persistent reduced order model (ROM) that is robust, stable, and provides high-fidelity simulations for a relatively wide range of parameters and operating conditions can provide a solution to this problem. The fidelity of a new framework for persistent model order reduction of large and complex dynamical systems is investigated. The framework is validated using several numerical examples including a large linear system and two complex nonlinear systems with material and geometrical nonlinearities. While the framework is used for identifying the robust subspaces obtained from both proper and smooth orthogonal decompositions (POD and SOD, respectively), the results show that SOD outperforms POD in terms of stability, accuracy, and robustness.

Reduced-order modelling of parameter-dependent, linear and nonlinear dynamic partial differential equation models.

PubMed

Shah, A A; Xing, W W; Triantafyllidis, V

2017-04-01

In this paper, we develop reduced-order models for dynamic, parameter-dependent, linear and nonlinear partial differential equations using proper orthogonal decomposition (POD). The main challenges are to accurately and efficiently approximate the POD bases for new parameter values and, in the case of nonlinear problems, to efficiently handle the nonlinear terms. We use a Bayesian nonlinear regression approach to learn the snapshots of the solutions and the nonlinearities for new parameter values. Computational efficiency is ensured by using manifold learning to perform the emulation in a low-dimensional space. The accuracy of the method is demonstrated on a linear and a nonlinear example, with comparisons with a global basis approach.

Reduced-order modelling of parameter-dependent, linear and nonlinear dynamic partial differential equation models

PubMed Central

Xing, W. W.; Triantafyllidis, V.

2017-01-01

In this paper, we develop reduced-order models for dynamic, parameter-dependent, linear and nonlinear partial differential equations using proper orthogonal decomposition (POD). The main challenges are to accurately and efficiently approximate the POD bases for new parameter values and, in the case of nonlinear problems, to efficiently handle the nonlinear terms. We use a Bayesian nonlinear regression approach to learn the snapshots of the solutions and the nonlinearities for new parameter values. Computational efficiency is ensured by using manifold learning to perform the emulation in a low-dimensional space. The accuracy of the method is demonstrated on a linear and a nonlinear example, with comparisons with a global basis approach. PMID:28484327

POD experiments using real and simulated time-sharing observations for GEO satellites in C-band transfer ranging system

NASA Astrophysics Data System (ADS)

Fen, Cao; XuHai, Yang; ZhiGang, Li; ChuGang, Feng

2016-08-01

The normal consecutive observing model in Chinese Area Positioning System (CAPS) can only supply observations of one GEO satellite in 1 day from one station. However, this can't satisfy the project need for observing many GEO satellites in 1 day. In order to obtain observations of several GEO satellites in 1 day like GPS/GLONASS/Galileo/BeiDou, the time-sharing observing model for GEO satellites in CAPS needs research. The principle of time-sharing observing model is illuminated with subsequent Precise Orbit Determination (POD) experiments using simulated time-sharing observations in 2005 and the real time-sharing observations in 2015. From time-sharing simulation experiments before 2014, the time-sharing observing 6 GEO satellites every 2 h has nearly the same orbit precision with the consecutive observing model. From POD experiments using the real time-sharing observations, POD precision for ZX12# and Yatai7# are about 3.234 m and 2.570 m, respectively, which indicates the time-sharing observing model is appropriate for CBTR system and can realize observing many GEO satellites in 1 day.

The Effective Business Practices of Mexican Drug Trafficking Organizations (DTOs)

DTIC Science & Technology

2013-06-01

perspective, such as previous release dates of the iPhone or changes in supporting platforms such as iTunes . Through this type of analysis, which breaks down...For example, Apple’s iPod/ iTunes business model encompassed two main activities: provide customers with an easy way to browse, purchase, and listen to...two separate activities, each with different customers, value, and infrastructure, in order to make up its iPod/ iTunes business model. This is

Advanced Fluid Reduced Order Models for Compressible Flow.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tezaur, Irina Kalashnikova; Fike, Jeffrey A.; Carlberg, Kevin Thomas

This report summarizes fiscal year (FY) 2017 progress towards developing and implementing within the SPARC in-house finite volume flow solver advanced fluid reduced order models (ROMs) for compressible captive-carriage flow problems of interest to Sandia National Laboratories for the design and qualification of nuclear weapons components. The proposed projection-based model order reduction (MOR) approach, known as the Proper Orthogonal Decomposition (POD)/Least- Squares Petrov-Galerkin (LSPG) method, can substantially reduce the CPU-time requirement for these simulations, thereby enabling advanced analyses such as uncertainty quantification and de- sign optimization. Following a description of the project objectives and FY17 targets, we overview briefly themore » POD/LSPG approach to model reduction implemented within SPARC . We then study the viability of these ROMs for long-time predictive simulations in the context of a two-dimensional viscous laminar cavity problem, and describe some FY17 enhancements to the proposed model reduction methodology that led to ROMs with improved predictive capabilities. Also described in this report are some FY17 efforts pursued in parallel to the primary objective of determining whether the ROMs in SPARC are viable for the targeted application. These include the implemen- tation and verification of some higher-order finite volume discretization methods within SPARC (towards using the code to study the viability of ROMs on three-dimensional cavity problems) and a novel structure-preserving constrained POD/LSPG formulation that can improve the accuracy of projection-based reduced order models. We conclude the report by summarizing the key takeaways from our FY17 findings, and providing some perspectives for future work.« less

An adaptive proper orthogonal decomposition method for model order reduction of multi-disc rotor system

NASA Astrophysics Data System (ADS)

Jin, Yulin; Lu, Kuan; Hou, Lei; Chen, Yushu

2017-12-01

The proper orthogonal decomposition (POD) method is a main and efficient tool for order reduction of high-dimensional complex systems in many research fields. However, the robustness problem of this method is always unsolved, although there are some modified POD methods which were proposed to solve this problem. In this paper, a new adaptive POD method called the interpolation Grassmann manifold (IGM) method is proposed to address the weakness of local property of the interpolation tangent-space of Grassmann manifold (ITGM) method in a wider parametric region. This method is demonstrated here by a nonlinear rotor system of 33-degrees of freedom (DOFs) with a pair of liquid-film bearings and a pedestal looseness fault. The motion region of the rotor system is divided into two parts: simple motion region and complex motion region. The adaptive POD method is compared with the ITGM method for the large and small spans of parameter in the two parametric regions to present the advantage of this method and disadvantage of the ITGM method. The comparisons of the responses are applied to verify the accuracy and robustness of the adaptive POD method, as well as the computational efficiency is also analyzed. As a result, the new adaptive POD method has a strong robustness and high computational efficiency and accuracy in a wide scope of parameter.

Structural health monitoring and probability of detection estimation

NASA Astrophysics Data System (ADS)

Forsyth, David S.

2016-02-01

Structural health monitoring (SHM) methods are often based on nondestructive testing (NDT) sensors and are often proposed as replacements for NDT to lower cost and/or improve reliability. In order to take advantage of SHM for life cycle management, it is necessary to determine the Probability of Detection (POD) of the SHM system just as for traditional NDT to ensure that the required level of safety is maintained. Many different possibilities exist for SHM systems, but one of the attractive features of SHM versus NDT is the ability to take measurements very simply after the SHM system is installed. Using a simple statistical model of POD, some authors have proposed that very high rates of SHM system data sampling can result in high effective POD even in situations where an individual test has low POD. In this paper, we discuss the theoretical basis for determining the effect of repeated inspections, and examine data from SHM experiments against this framework to show how the effective POD from multiple tests can be estimated.

POD Model Reconstruction for Gray-Box Fault Detection

NASA Technical Reports Server (NTRS)

Park, Han; Zak, Michail

2007-01-01

Proper orthogonal decomposition (POD) is the mathematical basis of a method of constructing low-order mathematical models for the "gray-box" fault-detection algorithm that is a component of a diagnostic system known as beacon-based exception analysis for multi-missions (BEAM). POD has been successfully applied in reducing computational complexity by generating simple models that can be used for control and simulation for complex systems such as fluid flows. In the present application to BEAM, POD brings the same benefits to automated diagnosis. BEAM is a method of real-time or offline, automated diagnosis of a complex dynamic system.The gray-box approach makes it possible to utilize incomplete or approximate knowledge of the dynamics of the system that one seeks to diagnose. In the gray-box approach, a deterministic model of the system is used to filter a time series of system sensor data to remove the deterministic components of the time series from further examination. What is left after the filtering operation is a time series of residual quantities that represent the unknown (or at least unmodeled) aspects of the behavior of the system. Stochastic modeling techniques are then applied to the residual time series. The procedure for detecting abnormal behavior of the system then becomes one of looking for statistical differences between the residual time series and the predictions of the stochastic model.

Uncertainty and operational considerations in mass prophylaxis workforce planning.

PubMed

Hupert, Nathaniel; Xiong, Wei; King, Kathleen; Castorena, Michelle; Hawkins, Caitlin; Wu, Cindie; Muckstadt, John A

2009-12-01

The public health response to an influenza pandemic or other large-scale health emergency may include mass prophylaxis using multiple points of dispensing (PODs) to deliver countermeasures rapidly to affected populations. Computer models created to date to determine "optimal" staffing levels at PODs typically assume stable patient demand for service. The authors investigated POD function under dynamic and uncertain operational environments. The authors constructed a Monte Carlo simulation model of mass prophylaxis (the Dynamic POD Simulator, or D-PODS) to assess the consequences of nonstationary patient arrival patterns on POD function under a variety of POD layouts and staffing plans. Compared are the performance of a standard POD layout under steady-state and variable patient arrival rates that may mimic real-life variation in patient demand. To achieve similar performance, PODs functioning under nonstationary patient arrival rates require higher staffing levels than would be predicted using the assumption of stationary arrival rates. Furthermore, PODs may develop severe bottlenecks unless staffing levels vary over time to meet changing patient arrival patterns. Efficient POD networks therefore require command and control systems capable of dynamically adjusting intra- and inter-POD staff levels to meet demand. In addition, under real-world operating conditions of heightened uncertainty, fewer large PODs will require a smaller total staff than many small PODs to achieve comparable performance. Modeling environments that capture the effects of fundamental uncertainties in public health disasters are essential for the realistic evaluation of response mechanisms and policies. D-PODS quantifies POD operational efficiency under more realistic conditions than have been modeled previously. The authors' experiments demonstrate that effective POD staffing plans must be responsive to variation and uncertainty in POD arrival patterns. These experiments highlight the need for command and control systems to be created to manage emergency response successfully.

Transport coefficient computation based on input/output reduced order models

NASA Astrophysics Data System (ADS)

Hurst, Joshua L.

The guiding purpose of this thesis is to address the optimal material design problem when the material description is a molecular dynamics model. The end goal is to obtain a simplified and fast model that captures the property of interest such that it can be used in controller design and optimization. The approach is to examine model reduction analysis and methods to capture a specific property of interest, in this case viscosity, or more generally complex modulus or complex viscosity. This property and other transport coefficients are defined by a input/output relationship and this motivates model reduction techniques that are tailored to preserve input/output behavior. In particular Singular Value Decomposition (SVD) based methods are investigated. First simulation methods are identified that are amenable to systems theory analysis. For viscosity, these models are of the Gosling and Lees-Edwards type. They are high order nonlinear Ordinary Differential Equations (ODEs) that employ Periodic Boundary Conditions. Properties can be calculated from the state trajectories of these ODEs. In this research local linear approximations are rigorously derived and special attention is given to potentials that are evaluated with Periodic Boundary Conditions (PBC). For the Gosling description LTI models are developed from state trajectories but are found to have limited success in capturing the system property, even though it is shown that full order LTI models can be well approximated by reduced order LTI models. For the Lees-Edwards SLLOD type model nonlinear ODEs will be approximated by a Linear Time Varying (LTV) model about some nominal trajectory and both balanced truncation and Proper Orthogonal Decomposition (POD) will be used to assess the plausibility of reduced order models to this system description. An immediate application of the derived LTV models is Quasilinearization or Waveform Relaxation. Quasilinearization is a Newton's method applied to the ODE operator equation. Its a recursive method that solves nonlinear ODE's by solving a LTV systems at each iteration to obtain a new closer solution. LTV models are derived for both Gosling and Lees-Edwards type models. Particular attention is given to SLLOD Lees-Edwards models because they are in a form most amenable to performing Taylor series expansion, and the most commonly used model to examine viscosity. With linear models developed a method is presented to calculate viscosity based on LTI Gosling models but is shown to have some limitations. To address these issues LTV SLLOD models are analyzed with both Balanced Truncation and POD and both show that significant order reduction is possible. By examining the singular values of both techniques it is shown that Balanced Truncation has a potential to offer greater reduction, which should be expected as it is based on the input/output mapping instead of just the state information as in POD. Obtaining reduced order systems that capture the property of interest is challenging. For Balanced Truncation reduced order models for 1-D LJ and FENE systems are obtained and are shown to capture the output of interest fairly well. However numerical challenges currently limit this analysis to small order systems. Suggestions are presented to extend this method to larger systems. In addition reduced 2nd order systems are obtained from POD. Here the challenge is extending the solution beyond the original period used for the projection, in particular identifying the manifold the solution travels along. The remaining challenges are presented and discussed.

Explicit treatment for Dirichlet, Neumann and Cauchy boundary conditions in POD-based reduction of groundwater models

NASA Astrophysics Data System (ADS)

Gosses, Moritz; Nowak, Wolfgang; Wöhling, Thomas

2018-05-01

In recent years, proper orthogonal decomposition (POD) has become a popular model reduction method in the field of groundwater modeling. It is used to mitigate the problem of long run times that are often associated with physically-based modeling of natural systems, especially for parameter estimation and uncertainty analysis. POD-based techniques reproduce groundwater head fields sufficiently accurate for a variety of applications. However, no study has investigated how POD techniques affect the accuracy of different boundary conditions found in groundwater models. We show that the current treatment of boundary conditions in POD causes inaccuracies for these boundaries in the reduced models. We provide an improved method that splits the POD projection space into a subspace orthogonal to the boundary conditions and a separate subspace that enforces the boundary conditions. To test the method for Dirichlet, Neumann and Cauchy boundary conditions, four simple transient 1D-groundwater models, as well as a more complex 3D model, are set up and reduced both by standard POD and POD with the new extension. We show that, in contrast to standard POD, the new method satisfies both Dirichlet and Neumann boundary conditions. It can also be applied to Cauchy boundaries, where the flux error of standard POD is reduced by its head-independent contribution. The extension essentially shifts the focus of the projection towards the boundary conditions. Therefore, we see a slight trade-off between errors at model boundaries and overall accuracy of the reduced model. The proposed POD extension is recommended where exact treatment of boundary conditions is required.

Yielding physically-interpretable emulators - A Sparse PCA approach

NASA Astrophysics Data System (ADS)

Galelli, S.; Alsahaf, A.; Giuliani, M.; Castelletti, A.

2015-12-01

Projection-based techniques, such as Principal Orthogonal Decomposition (POD), are a common approach to surrogate high-fidelity process-based models by lower order dynamic emulators. With POD, the dimensionality reduction is achieved by using observations, or 'snapshots' - generated with the high-fidelity model -, to project the entire set of input and state variables of this model onto a smaller set of basis functions that account for most of the variability in the data. While reduction efficiency and variance control of POD techniques are usually very high, the resulting emulators are structurally highly complex and can hardly be given a physically meaningful interpretation as each basis is a projection of the entire set of inputs and states. In this work, we propose a novel approach based on Sparse Principal Component Analysis (SPCA) that combines the several assets of POD methods with the potential for ex-post interpretation of the emulator structure. SPCA reduces the number of non-zero coefficients in the basis functions by identifying a sparse matrix of coefficients. While the resulting set of basis functions may retain less variance of the snapshots, the presence of a few non-zero coefficients assists in the interpretation of the underlying physical processes. The SPCA approach is tested on the reduction of a 1D hydro-ecological model (DYRESM-CAEDYM) used to describe the main ecological and hydrodynamic processes in Tono Dam, Japan. An experimental comparison against a standard POD approach shows that SPCA achieves the same accuracy in emulating a given output variable - for the same level of dimensionality reduction - while yielding better insights of the main process dynamics.

POD improvements of GALILEO satellites through the measurement of their non-gravitational accelerations by means of an onboard accelerometer

NASA Astrophysics Data System (ADS)

Peron, Roberto; Lucchesi, David M.; Santoli, Francesco; Iafolla, Valerio; Fiorenza, Emiliano; Lefevre, Carlo; Lucente, Marco; Magnafico, Carmelo; Kalarus, Maciej; Zielinski, Janusz

2016-04-01

The Precise Orbit Determination (POD) of the satellites of the Global Navigation Satellite Systems (GNSS) represents the basic prerequisite in order to provide refined ephemerides for their orbit, aimed at providing a precise and accurate positioning on the Earth. An important factor that impacts negatively in the POD of these satellites is the limited modeling of the accelerations produced by the non-gravitational accelerations. These, indeed, are subtle and generally complex to model properly, especially in the case of a complex in shape spacecraft, with solar panels and antennae for microwave link and the mutual shadowing effects among the many surfaces involved. We have to notice that their modeling has an important impact in the determination of a number of geophysical parameters of interest, such as stations coordinates, Earth's geocenter and orientation parameters. In the case of GNSS satellites, the main NGP acceleration is the one produced by the direct solar radiation pressure, with non-negligible contributions due to Earth's albedo, thermal effects and power radiated by the antennae. The models developed so far for these perturbative effects have shown many limits, as pointed out in the literature. Currently, the models developed for the NGPs are mainly based on empirical blind models (with the goal of absorb unknowns quantities) and more recently with the use of wing-box models, that try to provide a finite-elements approach to the modeling. The European Space Agency (ESA) - in the context of the development of the GALILEO constellation, and especially in view of the next generation of GALILEO spacecraft - besides being interested in possible improvements of the NGPs models, is also envisaging the use of an onboard accelerometer to directly measure them in order to improve the POD of each spacecraft of the constellation. We have been involved in this study by means of a proposal to ESA denominated GALileo and ACcelerometry (GALAC) led by the Space Research Centre (SRC) of the Polish Academy of Sciences (PAS) of Warsaw. The GALAC main objective is to provide the characteristics and performance of an onboard accelerometer able to improve the POD with respect to the current best results obtained through the modeling of the NGPs. The starting point of our activities has been the ISA accelerometer developed for the ESA BepiColombo mission to Mercury. We will present our results of a preparatory work for GALAC concerning a first characterization of the main NGPs acting on the GALILEO spacecraft of second generation, including their (main) spectral content. Such results are used to preliminary fix the accelerometer measurement band, its sensitivity and physical characteristics in order to fit with the GALILEO spacecraft environment.

An Evaluation of the Pea Pod System for Assessing Body Composition of Moderately Premature Infants.

PubMed

Forsum, Elisabet; Olhager, Elisabeth; Törnqvist, Caroline

2016-04-22

(1) BACKGROUND: Assessing the quality of growth in premature infants is important in order to be able to provide them with optimal nutrition. The Pea Pod device, based on air displacement plethysmography, is able to assess body composition of infants. However, this method has not been sufficiently evaluated in premature infants; (2) METHODS: In 14 infants in an age range of 3-7 days, born after 32-35 completed weeks of gestation, body weight, body volume, fat-free mass density (predicted by the Pea Pod software), and total body water (isotope dilution) were assessed. Reference estimates of fat-free mass density and body composition were obtained using a three-component model; (3) RESULTS: Fat-free mass density values, predicted using Pea Pod, were biased but not significantly (p > 0.05) different from reference estimates. Body fat (%), assessed using Pea Pod, was not significantly different from reference estimates. The biological variability of fat-free mass density was 0.55% of the average value (1.0627 g/mL); (4) CONCLUSION: The results indicate that the Pea Pod system is accurate for groups of newborn, moderately premature infants. However, more studies where this system is used for premature infants are needed, and we provide suggestions regarding how to develop this area.

Constrained reduced-order models based on proper orthogonal decomposition

DOE PAGES

Reddy, Sohail R.; Freno, Brian Andrew; Cizmas, Paul G. A.; ...

2017-04-09

A novel approach is presented to constrain reduced-order models (ROM) based on proper orthogonal decomposition (POD). The Karush–Kuhn–Tucker (KKT) conditions were applied to the traditional reduced-order model to constrain the solution to user-defined bounds. The constrained reduced-order model (C-ROM) was applied and validated against the analytical solution to the first-order wave equation. C-ROM was also applied to the analysis of fluidized beds. Lastly, it was shown that the ROM and C-ROM produced accurate results and that C-ROM was less sensitive to error propagation through time than the ROM.

Using Reconstructed POD Modes as Turbulent Inflow for LES Wind Turbine Simulations

NASA Astrophysics Data System (ADS)

Nielson, Jordan; Bhaganagar, Kiran; Juttijudata, Vejapong; Sirisup, Sirod

2016-11-01

Currently, in order to get realistic atmospheric effects of turbulence, wind turbine LES simulations require computationally expensive precursor simulations. At times, the precursor simulation is more computationally expensive than the wind turbine simulation. The precursor simulations are important because they capture turbulence in the atmosphere and as stated above, turbulence impacts the power production estimation. On the other hand, POD analysis has been shown to be capable of capturing turbulent structures. The current study was performed to determine the plausibility of using lower dimension models from POD analysis of LES simulations as turbulent inflow to wind turbine LES simulations. The study will aid the wind energy community by lowering the computational cost of full scale wind turbine LES simulations, while maintaining a high level of turbulent information and being able to quickly apply the turbulent inflow to multi turbine wind farms. This will be done by comparing a pure LES precursor wind turbine simulation with simulations that use reduced POD mod inflow conditions. The study shows the feasibility of using lower dimension models as turbulent inflow of LES wind turbine simulations. Overall the power production estimation and velocity field of the wind turbine wake are well captured with small errors.

A novel coupling of noise reduction algorithms for particle flow simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zimoń, M.J., E-mail: malgorzata.zimon@stfc.ac.uk; James Weir Fluids Lab, Mechanical and Aerospace Engineering Department, The University of Strathclyde, Glasgow G1 1XJ; Reese, J.M.

2016-09-15

Proper orthogonal decomposition (POD) and its extension based on time-windows have been shown to greatly improve the effectiveness of recovering smooth ensemble solutions from noisy particle data. However, to successfully de-noise any molecular system, a large number of measurements still need to be provided. In order to achieve a better efficiency in processing time-dependent fields, we have combined POD with a well-established signal processing technique, wavelet-based thresholding. In this novel hybrid procedure, the wavelet filtering is applied within the POD domain and referred to as WAVinPOD. The algorithm exhibits promising results when applied to both synthetically generated signals and particlemore » data. In this work, the simulations compare the performance of our new approach with standard POD or wavelet analysis in extracting smooth profiles from noisy velocity and density fields. Numerical examples include molecular dynamics and dissipative particle dynamics simulations of unsteady force- and shear-driven liquid flows, as well as phase separation phenomenon. Simulation results confirm that WAVinPOD preserves the dimensionality reduction obtained using POD, while improving its filtering properties through the sparse representation of data in wavelet basis. This paper shows that WAVinPOD outperforms the other estimators for both synthetically generated signals and particle-based measurements, achieving a higher signal-to-noise ratio from a smaller number of samples. The new filtering methodology offers significant computational savings, particularly for multi-scale applications seeking to couple continuum informations with atomistic models. It is the first time that a rigorous analysis has compared de-noising techniques for particle-based fluid simulations.« less

International journal of computational fluid dynamics real-time prediction of unsteady flow based on POD reduced-order model and particle filter

NASA Astrophysics Data System (ADS)

Kikuchi, Ryota; Misaka, Takashi; Obayashi, Shigeru

2016-04-01

An integrated method consisting of a proper orthogonal decomposition (POD)-based reduced-order model (ROM) and a particle filter (PF) is proposed for real-time prediction of an unsteady flow field. The proposed method is validated using identical twin experiments of an unsteady flow field around a circular cylinder for Reynolds numbers of 100 and 1000. In this study, a PF is employed (ROM-PF) to modify the temporal coefficient of the ROM based on observation data because the prediction capability of the ROM alone is limited due to the stability issue. The proposed method reproduces the unsteady flow field several orders faster than a reference numerical simulation based on Navier-Stokes equations. Furthermore, the effects of parameters, related to observation and simulation, on the prediction accuracy are studied. Most of the energy modes of the unsteady flow field are captured, and it is possible to stably predict the long-term evolution with ROM-PF.

Comparing and improving proper orthogonal decomposition (POD) to reduce the complexity of groundwater models

NASA Astrophysics Data System (ADS)

Gosses, Moritz; Nowak, Wolfgang; Wöhling, Thomas

2017-04-01

Physically-based modeling is a wide-spread tool in understanding and management of natural systems. With the high complexity of many such models and the huge amount of model runs necessary for parameter estimation and uncertainty analysis, overall run times can be prohibitively long even on modern computer systems. An encouraging strategy to tackle this problem are model reduction methods. In this contribution, we compare different proper orthogonal decomposition (POD, Siade et al. (2010)) methods and their potential applications to groundwater models. The POD method performs a singular value decomposition on system states as simulated by the complex (e.g., PDE-based) groundwater model taken at several time-steps, so-called snapshots. The singular vectors with the highest information content resulting from this decomposition are then used as a basis for projection of the system of model equations onto a subspace of much lower dimensionality than the original complex model, thereby greatly reducing complexity and accelerating run times. In its original form, this method is only applicable to linear problems. Many real-world groundwater models are non-linear, tough. These non-linearities are introduced either through model structure (unconfined aquifers) or boundary conditions (certain Cauchy boundaries, like rivers with variable connection to the groundwater table). To date, applications of POD focused on groundwater models simulating pumping tests in confined aquifers with constant head boundaries. In contrast, POD model reduction either greatly looses accuracy or does not significantly reduce model run time if the above-mentioned non-linearities are introduced. We have also found that variable Dirichlet boundaries are problematic for POD model reduction. An extension to the POD method, called POD-DEIM, has been developed for non-linear groundwater models by Stanko et al. (2016). This method uses spatial interpolation points to build the equation system in the reduced model space, thereby allowing the recalculation of system matrices at every time-step necessary for non-linear models while retaining the speed of the reduced model. This makes POD-DEIM applicable for groundwater models simulating unconfined aquifers. However, in our analysis, the method struggled to reproduce variable river boundaries accurately and gave no advantage for variable Dirichlet boundaries compared to the original POD method. We have developed another extension for POD that targets to address these remaining problems by performing a second POD operation on the model matrix on the left-hand side of the equation. The method aims to at least reproduce the accuracy of the other methods where they are applicable while outperforming them for setups with changing river boundaries or variable Dirichlet boundaries. We compared the new extension with original POD and POD-DEIM for different combinations of model structures and boundary conditions. The new method shows the potential of POD extensions for applications to non-linear groundwater systems and complex boundary conditions that go beyond the current, relatively limited range of applications. References: Siade, A. J., Putti, M., and Yeh, W. W.-G. (2010). Snapshot selection for groundwater model reduction using proper orthogonal decomposition. Water Resour. Res., 46(8):W08539. Stanko, Z. P., Boyce, S. E., and Yeh, W. W.-G. (2016). Nonlinear model reduction of unconfined groundwater flow using pod and deim. Advances in Water Resources, 97:130 - 143.

Hemodynamics of a Patient-Specific Aneurysm Model with Proper Orthogonal Decomposition

NASA Astrophysics Data System (ADS)

Han, Suyue; Chang, Gary Han; Modarres-Sadeghi, Yahya

2017-11-01

Wall shear stress (WSS) and oscillatory shear index (OSI) are two of the most-widely studied hemodynamic quantities in cardiovascular systems that have been shown to have the ability to elicit biological responses of the arterial wall, which could be used to predict the aneurysm development and rupture. In this study, a reduced-order model (ROM) of the hemodynamics of a patient-specific cerebral aneurysm is studied. The snapshot Proper Orthogonal Decomposition (POD) is utilized to construct the reduced-order bases of the flow using a CFD training set with known inflow parameters. It was shown that the area of low WSS and high OSI is correlated to higher POD modes. The resulting ROM can reproduce both WSS and OSI computationally for future parametric studies with significantly less computational cost. Agreement was observed between the WSS and OSI values obtained using direct CFD results and ROM results.

Short-term quality of life in patients undergoing colonic surgery using enhanced recovery after surgery program versus conventional perioperative management.

PubMed

Wang, Hao; Zhu, Dexiang; Liang, Li; Ye, Lechi; Lin, Qi; Zhong, Yunshi; Wei, Ye; Ren, Li; Xu, Jianmin; Qin, Xinyu

2015-11-01

Enhanced recovery after surgery (ERAS) integrates evidence-based interventions to reduce surgical stress and accelerate rehabilitation. Our study was to compare the short-term quality of life (QOL) in patients undergoing open colonic surgery using ERAS program or conventional management. A prospective study of 57 patients using ERAS program and 60 patients using conventional management was conducted. The clinical characteristics of all patients were recorded. QOL was evaluated longitudinally using the questionnaires (EORTC QLQ-C30 and QLQ-CR29) pre- and postoperatively. Generalized estimating equation was used to do the analysis in order to determine the effective impact of correlative factors on the postoperative QOL, including age, sex, BMI, ASA grade, tumor location, tumor size, pTNM stage, recovery program and length of time after surgery. The morbidity in ERAS and control group was 17.5 versus 26.7 % (p = 0.235). The patients in ERAS group had much faster rehabilitation and less hospital stay. In the primary statistical analysis, the scores of global QOL (on POD3, POD6, POD10, POD14, POD21), physical functioning (on POD3, POD6, POD10, POD14, POD21), role functioning (on POD6, POD10, POD14, POD21), emotional functioning (on POD3, POD6, POD10, POD14, POD21), cognitive functioning (on POD3, POD6) and social functioning (on POD3, POD6, POD10, POD14, POD21, POD28) were higher in ERAS group than in control group, which suggested that the patients in ERAS group had a better life status. However, the scores of pain (on POD10, POD14, POD21), appetite loss (on POD3, POD6), constipation (on POD3, POD6, POD10), diarrhea (on POD3, POD10), financial difficulties (on POD10, POD14, POD21), perspective of future health (on POD6, POD10, POD14), gastrointestinal tract problems (on POD3, POD6, POD10) and defecation problems (on POD6, POD10, POD14) were lower in ERAS group than in control group, which revealed that the patients in ERAS group suffered less symptoms. In the further generalized estimating equation analysis, the result showed that recovery program and length of time after surgery had independently positive impact on the patient's postoperative QOL. Short-term QOL in patients undergoing colonic cancer using ERAS program was better than that using conventional management.

Improving Nutritional Quality of Cocoa Pod (Theobroma cacao) through Chemical and Biological Treatments for Ruminant Feeding: In vitro and In vivo Evaluation.

PubMed

Laconi, Erika B; Jayanegara, Anuraga

2015-03-01

Cocoa pod is among the by-products of cocoa (Theobroma cacao) plantations. The aim of this study was to apply a number of treatments in order to improve nutritional quality of cocoa pod for feeding of ruminants. Cocoa pod was subjected to different treatments, i.e. C (cocoa pod without any treatment or control), CAm (cocoa pod+1.5% urea), CMo (cocoa pod+3% molasses), CRu (cocoa pod+3% rumen content) and CPh (cocoa pod+3% molasses+Phanerochaete chrysosporium inoculum). Analysis of proximate and Van Soest's fiber fraction were performed on the respective treatments. The pods were then subjected to an in vitro digestibility evaluation by incubation in rumen fluid-buffer medium, employing a randomized complete block design (n = 3 replicates). Further, an in vivo evaluation of the pods (35% inclusion level in total mixed ration) was conducted by feeding to young Holstein steers (average body weight of 145±3.6 kg) with a 5×5 latin square design arrangement (n = 5 replicates). Each experimental period lasted for 30 d; the first 20 d was for feed adaptation, the next 3 d was for sampling of rumen liquid, and the last 7 d was for measurements of digestibility and N balance. Results revealed that lignin content was reduced significantly when cocoa pod was treated with urea, molasses, rumen content or P. chrysosporium (p<0.01) with the following order of effectiveness: CPh>CAm>CRu>CMo. Among all treatments, CAm and CPh treatments significantly improved the in vitro dry matter and organic matter digestibility (p<0.05) of cocoa pod. Average daily gain of steers receiving CAm or CPh treatment was significantly higher than that of control (p<0.01) with an increase of 105% and 92%, respectively. Such higher daily gain was concomitant with higher N retention and proportion of N retention to N intake in CAm and CPh treatments than those of control (p<0.05). It can be concluded from this study that treatment with either urea or P. chrysosporium is effective in improving the nutritive value of cocoa pod.

Reduced-order model for dynamic optimization of pressure swing adsorption processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, A.; Biegler, L.; Zitney, S.

2007-01-01

Over the past decades, pressure swing adsorption (PSA) processes have been widely used as energy-efficient gas and liquid separation techniques, especially for high purity hydrogen purification from refinery gases. The separation processes are based on solid-gas equilibrium and operate under periodic transient conditions. Models for PSA processes are therefore multiple instances of partial differential equations (PDEs) in time and space with periodic boundary conditions that link the processing steps together. The solution of this coupled stiff PDE system is governed by steep concentrations and temperature fronts moving with time. As a result, the optimization of such systems for either designmore » or operation represents a significant computational challenge to current differential algebraic equation (DAE) optimization techniques and nonlinear programming algorithms. Model reduction is one approach to generate cost-efficient low-order models which can be used as surrogate models in the optimization problems. The study develops a reduced-order model (ROM) based on proper orthogonal decomposition (POD), which is a low-dimensional approximation to a dynamic PDE-based model. Initially, a representative ensemble of solutions of the dynamic PDE system is constructed by solving a higher-order discretization of the model using the method of lines, a two-stage approach that discretizes the PDEs in space and then integrates the resulting DAEs over time. Next, the ROM method applies the Karhunen-Loeve expansion to derive a small set of empirical eigenfunctions (POD modes) which are used as basis functions within a Galerkin's projection framework to derive a low-order DAE system that accurately describes the dominant dynamics of the PDE system. The proposed method leads to a DAE system of significantly lower order, thus replacing the one obtained from spatial discretization before and making optimization problem computationally-efficient. The method has been applied to the dynamic coupled PDE-based model of a two-bed four-step PSA process for separation of hydrogen from methane. Separate ROMs have been developed for each operating step with different POD modes for each of them. A significant reduction in the order of the number of states has been achieved. The gas-phase mole fraction, solid-state loading and temperature profiles from the low-order ROM and from the high-order simulations have been compared. Moreover, the profiles for a different set of inputs and parameter values fed to the same ROM were compared with the accurate profiles from the high-order simulations. Current results indicate the proposed ROM methodology as a promising surrogate modeling technique for cost-effective optimization purposes. Moreover, deviations from the ROM for different set of inputs and parameters suggest that a recalibration of the model is required for the optimization studies. Results for these will also be presented with the aforementioned results.« less

EpiPOD : community vaccination and dispensing model user's guide.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, M.; Samsa, M.; Walsh, D.

EpiPOD is a modeling system that enables local, regional, and county health departments to evaluate and refine their plans for mass distribution of antiviral and antibiotic medications and vaccines. An intuitive interface requires users to input as few or as many plan specifics as are available in order to simulate a mass treatment campaign. Behind the input interface, a system dynamics model simulates pharmaceutical supply logistics, hospital and first-responder personnel treatment, population arrival dynamics and treatment, and disease spread. When the simulation is complete, users have estimates of the number of illnesses in the population at large, the number ofmore » ill persons seeking treatment, and queuing and delays within the mass treatment system--all metrics by which the plan can be judged.« less

Model-based POD study of manual ultrasound inspection and sensitivity analysis using metamodel

NASA Astrophysics Data System (ADS)

Ribay, Guillemette; Artusi, Xavier; Jenson, Frédéric; Reece, Christopher; Lhuillier, Pierre-Emile

2016-02-01

The reliability of NDE can be quantified by using the Probability of Detection (POD) approach. Former studies have shown the potential of the model-assisted POD (MAPOD) approach to replace expensive experimental determination of POD curves. In this paper, we make use of CIVA software to determine POD curves for a manual ultrasonic inspection of a heavy component, for which a whole experimental POD campaign was not available. The influential parameters were determined by expert analysis. The semi-analytical models used in CIVA for wave propagation and beam-defect interaction have been validated in the range of variation of the influential parameters by comparison with finite element modelling (Athena). The POD curves are computed for « hit/miss » and « â versus a » analysis. The verification of Berens hypothesis is evaluated by statistical tools. A sensitivity study is performed to measure the relative influence of parameters on the defect response amplitude variance, using the Sobol sensitivity index. A meta-model is also built to reduce computing cost and enhance the precision of estimated index.

A Novel Stress-Diathesis Model to Predict Risk of Post-operative Delirium: Implications for Intra-operative Management.

PubMed

El-Gabalawy, Renée; Patel, Ronak; Kilborn, Kayla; Blaney, Caitlin; Hoban, Christopher; Ryner, Lawrence; Funk, Duane; Legaspi, Regina; Fisher, Joseph A; Duffin, James; Mikulis, David J; Mutch, W Alan C

2017-01-01

Introduction: Risk assessment for post-operative delirium (POD) is poorly developed. Improved metrics could greatly facilitate peri-operative care as costs associated with POD are staggering. In this preliminary study, we develop a novel stress-diathesis model based on comprehensive pre-operative psychiatric and neuropsychological testing, a blood oxygenation level-dependent (BOLD) magnetic resonance imaging (MRI) carbon dioxide (CO 2 ) stress test, and high fidelity measures of intra-operative parameters that may interact facilitating POD. Methods: The study was approved by the ethics board at the University of Manitoba and registered at clinicaltrials.gov as NCT02126215. Twelve patients were studied. Pre-operative psychiatric symptom measures and neuropsychological testing preceded MRI featuring a BOLD MRI CO 2 stress test whereby BOLD scans were conducted while exposing participants to a rigorously controlled CO 2 stimulus. During surgery the patient had hemodynamics and end-tidal gases downloaded at 0.5 hz. Post-operatively, the presence of POD and POD severity was comprehensively assessed using the Confusion Assessment Measure -Severity (CAM-S) scoring instrument on days 0 (surgery) through post-operative day 5, and patients were followed up at least 1 month post-operatively. Results: Six of 12 patients had no evidence of POD (non-POD). Three patients had POD and 3 had clinically significant confusional states (referred as subthreshold POD; ST-POD) (score ≥ 5/19 on the CAM-S). Average severity for delirium was 1.3 in the non-POD group, 3.2 in ST-POD, and 6.1 in POD (F-statistic = 15.4, p < 0.001). Depressive symptoms, and cognitive measures of semantic fluency and executive functioning/processing speed were significantly associated with POD. Second level analysis revealed an increased inverse BOLD responsiveness to CO 2 pre-operatively in ST-POD and marked increase in the POD groups when compared to the non-POD group. An association was also noted for the patient population to manifest leucoaraiosis as assessed with advanced neuroimaging techniques. Results provide preliminary support for the interacting of diatheses (vulnerabilities) and intra-operative stressors on the POD phenotype. Conclusions: The stress-diathesis model has the potential to aid in risk assessment for POD. Based on these initial findings, we make some recommendations for intra-operative management for patients at risk of POD.

A Novel Stress-Diathesis Model to Predict Risk of Post-operative Delirium: Implications for Intra-operative Management

PubMed Central

El-Gabalawy, Renée; Patel, Ronak; Kilborn, Kayla; Blaney, Caitlin; Hoban, Christopher; Ryner, Lawrence; Funk, Duane; Legaspi, Regina; Fisher, Joseph A.; Duffin, James; Mikulis, David J.; Mutch, W. Alan C.

2017-01-01

Introduction: Risk assessment for post-operative delirium (POD) is poorly developed. Improved metrics could greatly facilitate peri-operative care as costs associated with POD are staggering. In this preliminary study, we develop a novel stress-diathesis model based on comprehensive pre-operative psychiatric and neuropsychological testing, a blood oxygenation level-dependent (BOLD) magnetic resonance imaging (MRI) carbon dioxide (CO2) stress test, and high fidelity measures of intra-operative parameters that may interact facilitating POD. Methods: The study was approved by the ethics board at the University of Manitoba and registered at clinicaltrials.gov as NCT02126215. Twelve patients were studied. Pre-operative psychiatric symptom measures and neuropsychological testing preceded MRI featuring a BOLD MRI CO2 stress test whereby BOLD scans were conducted while exposing participants to a rigorously controlled CO2 stimulus. During surgery the patient had hemodynamics and end-tidal gases downloaded at 0.5 hz. Post-operatively, the presence of POD and POD severity was comprehensively assessed using the Confusion Assessment Measure –Severity (CAM-S) scoring instrument on days 0 (surgery) through post-operative day 5, and patients were followed up at least 1 month post-operatively. Results: Six of 12 patients had no evidence of POD (non-POD). Three patients had POD and 3 had clinically significant confusional states (referred as subthreshold POD; ST-POD) (score ≥ 5/19 on the CAM-S). Average severity for delirium was 1.3 in the non-POD group, 3.2 in ST-POD, and 6.1 in POD (F-statistic = 15.4, p < 0.001). Depressive symptoms, and cognitive measures of semantic fluency and executive functioning/processing speed were significantly associated with POD. Second level analysis revealed an increased inverse BOLD responsiveness to CO2 pre-operatively in ST-POD and marked increase in the POD groups when compared to the non-POD group. An association was also noted for the patient population to manifest leucoaraiosis as assessed with advanced neuroimaging techniques. Results provide preliminary support for the interacting of diatheses (vulnerabilities) and intra-operative stressors on the POD phenotype. Conclusions: The stress-diathesis model has the potential to aid in risk assessment for POD. Based on these initial findings, we make some recommendations for intra-operative management for patients at risk of POD. PMID:28868035

POD/MAC-Based Modal Basis Selection for a Reduced Order Nonlinear Response Analysis

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Przekop, Adam

2007-01-01

A feasibility study was conducted to explore the applicability of a POD/MAC basis selection technique to a nonlinear structural response analysis. For the case studied the application of the POD/MAC technique resulted in a substantial improvement of the reduced order simulation when compared to a classic approach utilizing only low frequency modes present in the excitation bandwidth. Further studies are aimed to expand application of the presented technique to more complex structures including non-planar and two-dimensional configurations. For non-planar structures the separation of different displacement components may not be necessary or desirable.

Probability of Detection (POD) as a statistical model for the validation of qualitative methods.

PubMed

Wehling, Paul; LaBudde, Robert A; Brunelle, Sharon L; Nelson, Maria T

2011-01-01

A statistical model is presented for use in validation of qualitative methods. This model, termed Probability of Detection (POD), harmonizes the statistical concepts and parameters between quantitative and qualitative method validation. POD characterizes method response with respect to concentration as a continuous variable. The POD model provides a tool for graphical representation of response curves for qualitative methods. In addition, the model allows comparisons between candidate and reference methods, and provides calculations of repeatability, reproducibility, and laboratory effects from collaborative study data. Single laboratory study and collaborative study examples are given.

Non-intrusive reduced order modeling of nonlinear problems using neural networks

NASA Astrophysics Data System (ADS)

Hesthaven, J. S.; Ubbiali, S.

2018-06-01

We develop a non-intrusive reduced basis (RB) method for parametrized steady-state partial differential equations (PDEs). The method extracts a reduced basis from a collection of high-fidelity solutions via a proper orthogonal decomposition (POD) and employs artificial neural networks (ANNs), particularly multi-layer perceptrons (MLPs), to accurately approximate the coefficients of the reduced model. The search for the optimal number of neurons and the minimum amount of training samples to avoid overfitting is carried out in the offline phase through an automatic routine, relying upon a joint use of the Latin hypercube sampling (LHS) and the Levenberg-Marquardt (LM) training algorithm. This guarantees a complete offline-online decoupling, leading to an efficient RB method - referred to as POD-NN - suitable also for general nonlinear problems with a non-affine parametric dependence. Numerical studies are presented for the nonlinear Poisson equation and for driven cavity viscous flows, modeled through the steady incompressible Navier-Stokes equations. Both physical and geometrical parametrizations are considered. Several results confirm the accuracy of the POD-NN method and show the substantial speed-up enabled at the online stage as compared to a traditional RB strategy.

Application of reduced order modeling techniques to problems in heat conduction, isoelectric focusing and differential algebraic equations

NASA Astrophysics Data System (ADS)

Mathai, Pramod P.

This thesis focuses on applying and augmenting 'Reduced Order Modeling' (ROM) techniques to large scale problems. ROM refers to the set of mathematical techniques that are used to reduce the computational expense of conventional modeling techniques, like finite element and finite difference methods, while minimizing the loss of accuracy that typically accompanies such a reduction. The first problem that we address pertains to the prediction of the level of heat dissipation in electronic and MEMS devices. With the ever decreasing feature sizes in electronic devices, and the accompanied rise in Joule heating, the electronics industry has, since the 1990s, identified a clear need for computationally cheap heat transfer modeling techniques that can be incorporated along with the electronic design process. We demonstrate how one can create reduced order models for simulating heat conduction in individual components that constitute an idealized electronic device. The reduced order models are created using Krylov Subspace Techniques (KST). We introduce a novel 'plug and play' approach, based on the small gain theorem in control theory, to interconnect these component reduced order models (according to the device architecture) to reliably and cheaply replicate whole device behavior. The final aim is to have this technique available commercially as a computationally cheap and reliable option that enables a designer to optimize for heat dissipation among competing VLSI architectures. Another place where model reduction is crucial to better design is Isoelectric Focusing (IEF) - the second problem in this thesis - which is a popular technique that is used to separate minute amounts of proteins from the other constituents that are present in a typical biological tissue sample. Fundamental questions about how to design IEF experiments still remain because of the high dimensional and highly nonlinear nature of the differential equations that describe the IEF process as well as the uncertainty in the parameters of the differential equations. There is a clear need to design better experiments for IEF without the current overhead of expensive chemicals and labor. We show how with a simpler modeling of the underlying chemistry, we can still achieve the accuracy that has been achieved in existing literature for modeling small ranges of pH (hydrogen ion concentration) in IEF, but with far less computational time. We investigate a further reduction of time by modeling the IEF problem using the Proper Orthogonal Decomposition (POD) technique and show why POD may not be sufficient due to the underlying constraints. The final problem that we address in this thesis addresses a certain class of dynamics with high stiffness - in particular, differential algebraic equations. With the help of simple examples, we show how the traditional POD procedure will fail to model certain high stiffness problems due to a particular behavior of the vector field which we will denote as twist. We further show how a novel augmentation to the traditional POD algorithm can model-reduce problems with twist in a computationally cheap manner without any additional data requirements.

Simulation and optimization of pressure swing adsorption systmes using reduced-order modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, A.; Biegler, L.; Zitney, S.

2009-01-01

Over the past three decades, pressure swing adsorption (PSA) processes have been widely used as energyefficient gas separation techniques, especially for high purity hydrogen purification from refinery gases. Models for PSA processes are multiple instances of partial differential equations (PDEs) in time and space with periodic boundary conditions that link the processing steps together. The solution of this coupled stiff PDE system is governed by steep fronts moving with time. As a result, the optimization of such systems represents a significant computational challenge to current differential algebraic equation (DAE) optimization techniques and nonlinear programming algorithms. Model reduction is one approachmore » to generate cost-efficient low-order models which can be used as surrogate models in the optimization problems. This study develops a reducedorder model (ROM) based on proper orthogonal decomposition (POD), which is a low-dimensional approximation to a dynamic PDE-based model. The proposed method leads to a DAE system of significantly lower order, thus replacing the one obtained from spatial discretization and making the optimization problem computationally efficient. The method has been applied to the dynamic coupled PDE-based model of a twobed four-step PSA process for separation of hydrogen from methane. Separate ROMs have been developed for each operating step with different POD modes for each of them. A significant reduction in the order of the number of states has been achieved. The reduced-order model has been successfully used to maximize hydrogen recovery by manipulating operating pressures, step times and feed and regeneration velocities, while meeting product purity and tight bounds on these parameters. Current results indicate the proposed ROM methodology as a promising surrogate modeling technique for cost-effective optimization purposes.« less

Optimal design of UAV's pod shape

NASA Astrophysics Data System (ADS)

Wei, Qun; Jia, Hong-guang

2011-08-01

In the modern war, UAV(unmanned aircraft system) plays a more and more important role in the army. UAVs always carry electrical-optical reconnaissance systems. These systems are used to accomplish the missions of observing and reconnaissance the battlefield. For traditional UAV, the shape of the pod on UAV is sphericity. In addition, the pod of UAV not only has the job of observing and reconnaissance the battlefield, but its shape also has impact on the UAV's drag when it flies in the air. In this paper, two different kinds of pod models are set up, one is the traditional sphericity model, the other is a new model. Unstructured grid is used on the flow field. Using CFD(computational fluid dynamic) method, the results of the drags of the different kinds of pod are got. The drag's relationship between the pod and the UAV is obtained by comparing the results of simulations. After analyzing the results we can get: when UAV flies at low speed(0.3Ma{0.7Ma), the drag's difference between the two kinds of pod is little, the pod's drag takes a small part of the UAV's whole drag which is only about 14%. At transonic speed(0.8Ma{1.2Ma), the drag's difference between these two kinds of pod is getting bigger and bigger along with the speed goes higher. The traditional pod's drag is 1/3 of the UAV's whole drag value, but for the new pod, it is only 1/5. At supersonic speed(1.3Ma{2.0Ma), the traditional pod's drag goes up rapidly, but the new kind of pod's drag goes up slowly. This makes the difference between the two kinds of UAVs' total drag comes greater. For example, at 2Ma, the total drag of new UAV is only 2/3 of the traditional UAV. These results show: when the UAV flies at low speed, these two kinds of pod have little difference in drag. But if it flies at supersonic speed, the pod has great impact on the UAV's total drag, so the designer of UAV's pod should pay more attention on the out shape.

Developing an Accurate CFD Based Gust Model for the Truss Braced Wing Aircraft

NASA Technical Reports Server (NTRS)

Bartels, Robert E.

2013-01-01

The increased flexibility of long endurance aircraft having high aspect ratio wings necessitates attention to gust response and perhaps the incorporation of gust load alleviation. The design of civil transport aircraft with a strut or truss-braced high aspect ratio wing furthermore requires gust response analysis in the transonic cruise range. This requirement motivates the use of high fidelity nonlinear computational fluid dynamics (CFD) for gust response analysis. This paper presents the development of a CFD based gust model for the truss braced wing aircraft. A sharp-edged gust provides the gust system identification. The result of the system identification is several thousand time steps of instantaneous pressure coefficients over the entire vehicle. This data is filtered and downsampled to provide the snapshot data set from which a reduced order model is developed. A stochastic singular value decomposition algorithm is used to obtain a proper orthogonal decomposition (POD). The POD model is combined with a convolution integral to predict the time varying pressure coefficient distribution due to a novel gust profile. Finally the unsteady surface pressure response of the truss braced wing vehicle to a one-minus-cosine gust, simulated using the reduced order model, is compared with the full CFD.

Design and Parametric Study of the Magnetic Sensor for Position Detection in Linear Motor Based on Nonlinear Parametric Model Order Reduction

PubMed Central

Paul, Sarbajit; Chang, Junghwan

2017-01-01

This paper presents a design approach for a magnetic sensor module to detect mover position using the proper orthogonal decomposition-dynamic mode decomposition (POD-DMD)-based nonlinear parametric model order reduction (PMOR). The parameterization of the sensor module is achieved by using the multipolar moment matching method. Several geometric variables of the sensor module are considered while developing the parametric study. The operation of the sensor module is based on the principle of the airgap flux density distribution detection by the Hall Effect IC. Therefore, the design objective is to achieve a peak flux density (PFD) greater than 0.1 T and total harmonic distortion (THD) less than 3%. To fulfill the constraint conditions, the specifications for the sensor module is achieved by using POD-DMD based reduced model. The POD-DMD based reduced model provides a platform to analyze the high number of design models very fast, with less computational burden. Finally, with the final specifications, the experimental prototype is designed and tested. Two different modes, 90° and 120° modes respectively are used to obtain the position information of the linear motor mover. The position information thus obtained are compared with that of the linear scale data, used as a reference signal. The position information obtained using the 120° mode has a standard deviation of 0.10 mm from the reference linear scale signal, whereas the 90° mode position signal shows a deviation of 0.23 mm from the reference. The deviation in the output arises due to the mechanical tolerances introduced into the specification during the manufacturing process. This provides a scope for coupling the reliability based design optimization in the design process as a future extension. PMID:28671580

Design and Parametric Study of the Magnetic Sensor for Position Detection in Linear Motor Based on Nonlinear Parametric model order reduction.

PubMed

Paul, Sarbajit; Chang, Junghwan

2017-07-01

This paper presents a design approach for a magnetic sensor module to detect mover position using the proper orthogonal decomposition-dynamic mode decomposition (POD-DMD)-based nonlinear parametric model order reduction (PMOR). The parameterization of the sensor module is achieved by using the multipolar moment matching method. Several geometric variables of the sensor module are considered while developing the parametric study. The operation of the sensor module is based on the principle of the airgap flux density distribution detection by the Hall Effect IC. Therefore, the design objective is to achieve a peak flux density (PFD) greater than 0.1 T and total harmonic distortion (THD) less than 3%. To fulfill the constraint conditions, the specifications for the sensor module is achieved by using POD-DMD based reduced model. The POD-DMD based reduced model provides a platform to analyze the high number of design models very fast, with less computational burden. Finally, with the final specifications, the experimental prototype is designed and tested. Two different modes, 90° and 120° modes respectively are used to obtain the position information of the linear motor mover. The position information thus obtained are compared with that of the linear scale data, used as a reference signal. The position information obtained using the 120° mode has a standard deviation of 0.10 mm from the reference linear scale signal, whereas the 90° mode position signal shows a deviation of 0.23 mm from the reference. The deviation in the output arises due to the mechanical tolerances introduced into the specification during the manufacturing process. This provides a scope for coupling the reliability based design optimization in the design process as a future extension.

Comparison of precise orbit determination methods of zero-difference kinematic, dynamic and reduced-dynamic of GRACE-A satellite using SHORDE software

NASA Astrophysics Data System (ADS)

Li, Kai; Zhou, Xuhua; Guo, Nannan; Zhao, Gang; Xu, Kexin; Lei, Weiwei

2017-09-01

Zero-difference kinematic, dynamic and reduced-dynamic precise orbit determination (POD) are three methods to obtain the precise orbits of Low Earth Orbit satellites (LEOs) by using the on-board GPS observations. Comparing the differences between those methods have great significance to establish the mathematical model and is usefull for us to select a suitable method to determine the orbit of the satellite. Based on the zero-difference GPS carrier-phase measurements, Shanghai Astronomical Observatory (SHAO) has improved the early version of SHORDE and then developed it as an integrated software system, which can perform the POD of LEOs by using the above three methods. In order to introduce the function of the software, we take the Gravity Recovery And Climate Experiment (GRACE) on-board GPS observations in January 2008 as example, then we compute the corresponding orbits of GRACE by using the SHORDE software. In order to evaluate the accuracy, we compare the orbits with the precise orbits provided by Jet Propulsion Laboratory (JPL). The results show that: (1) If we use the dynamic POD method, and the force models are used to represent the non-conservative forces, the average accuracy of the GRACE orbit is 2.40cm, 3.91cm, 2.34cm and 5.17cm in radial (R), along-track (T), cross-track (N) and 3D directions respectively; If we use the accelerometer observation instead of non-conservative perturbation model, the average accuracy of the orbit is 1.82cm, 2.51cm, 3.48cm and 4.68cm in R, T, N and 3D directions respectively. The result shows that if we use accelerometer observation instead of the non-conservative perturbation model, the accuracy of orbit is better. (2) When we use the reduced-dynamic POD method to get the orbits, the average accuracy of the orbit is 0.80cm, 1.36cm, 2.38cm and 2.87cm in R, T, N and 3D directions respectively. This method is carried out by setting up the pseudo-stochastic pulses to absorb the errors of atmospheric drag and other perturbations. (3) If we use the kinematic POD method, the accuracy of the GRACE orbit is 2.92cm, 2.48cm, 2.76cm and 4.75cm in R, T, N and 3D directions respectively. In conclusion, it can be seen that the POD of GRACE satellite is practicable by using different strategies and methods. The orbit solution is well and stable, they all can obtain the GRACE orbits with centimeter-level precision.

Mineral accumulation in vegetative and reproductive tissues during seed development in Medicago truncatula

PubMed Central

Garcia, Christina B.; Grusak, Michael A.

2015-01-01

Enhancing nutrient density in legume seeds is one of several strategies being explored to improve the nutritional quality of the food supply. In order to develop crop varieties with increased seed mineral concentration, a more detailed understanding of mineral translocation within the plant is required. By studying mineral accumulation in different organs within genetically diverse members of the same species, it may be possible to identify variable traits that modulate seed mineral concentration. We utilized two ecotypes (A17 and DZA315.16) of the model legume, Medicago truncatula, to study dry mass and mineral accumulation in the leaves, pod walls, and seeds during reproductive development. The pod wall dry mass was significantly different between the two ecotypes beginning at 12 days after pollination, whereas there was no significant difference in the average dry mass of individual seeds between the two ecotypes at any time point. There were also no significant differences in leaf dry mass between ecotypes; however, we observed expansion of A17 leaves during the first 21 days of pod development, while DZA315.16 leaves did not display a significant increase in leaf area. Mineral profiling of the leaves, pod walls, and seeds highlighted differences in accumulation patterns among minerals within each tissue as well as genotypic differences with respect to individual minerals. Because there were differences in the average seed number per pod, the total seed mineral content per pod was generally higher in A17 than DZA315.16. In addition, mineral partitioning to the seeds tended to be higher in A17 pods. These data revealed that mineral retention within leaves and/or pod walls might attenuate mineral accumulation within the seeds. As a result, strategies to increase seed mineral content should include approaches that will enhance export from these tissues. PMID:26322063

Reduced-order modeling of the flow around a high-lift configuration with unsteady Coanda blowing

NASA Astrophysics Data System (ADS)

Semaan, Richard; Cordier, Laurent; Noack, Bernd; Kumar, Pradeep; Burnazzi, Marco; Tissot, Gilles

2015-11-01

We propose a low-dimensional POD model for the transient and post-transient flow around a high-lift airfoil with unsteady Coanda blowing over the trailing edge. This model comprises the effect of high-frequency modulated blowing which mitigates vortex shedding and increases lift. The structure of the dynamical system is derived from the Navier-Stokes equations with a Galerkin projection and from subsequent dynamic simplifications. The system parameters are determined with a data assimilation (4D-Var) method. The boundary actuation is incorporated into the model with actuation modes following Graham et al. (1999); Kasnakoğlu et al. (2008). As novel enabler, we show that the performance of the POD model significantly benefits from employing additional actuation modes for different frequency components associated with the same actuation input. In addition, linear, weakly nonlinear and fully nonlinear models are considered. The current study suggests that separate actuation modes for different actuation frequencies improve Galerkin model performance, in particular with respect to the important base-flow changes. We acknowledge (1) the Collaborative Research Centre (CRC 880) ``Fundamentals of High Lift of Future Civil Aircraft,'' and 2) the Senior Chair of Excellence ``Closed-loop control of turbulent shear flows using reduced-order models'' (TUCOROM).

Fundamental Insights into Combustion Instability Predictions in Aerospace Propulsion

NASA Astrophysics Data System (ADS)

Huang, Cheng

Integrated multi-fidelity modeling has been performed for combustion instability in aerospace propulsion, which includes two levels of analysis: first, computational fluid dynamics (CFD) using hybrid RANS/LES simulations for underlying physics investigations (high-fidelity modeling); second, modal decomposition techniques for diagnostics (analysis & validation); third, development of flame response model using model reduction techniques for practical design applications (low-order model). For the high-fidelity modeling, the relevant CFD code development work is moving towards combustion instability prediction for liquid propulsion system. A laboratory-scale single-element lean direct injection (LDI) gas turbine combustor is used for configuration that produces self-excited combustion instability. The model gas turbine combustor is featured with an air inlet section, air plenum, swirler-venturi-injector assembly, combustion chamber, and exit nozzle. The combustor uses liquid fuel (Jet-A/FT-SPK) and heated air up to 800K. Combustion dynamics investigations are performed with the same geometry and operating conditions concurrently between the experiment and computation at both high (φ=0.6) and low (φ=0.36) equivalence ratios. The simulation is able to reach reasonable agreement with experiment measurements in terms of the pressure signal. Computational analyses are also performed using an acoustically-open geometry to investigate the characteristic hydrodynamics in the combustor with both constant and perturbed inlet mass flow rates. Two hydrodynamic modes are identified by using Dynamic Mode Decomposition (DMD) analysis: Vortex Breakdown Bubble (VBB) and swirling modes. Following that, the closed geometry simulation results are analyzed in three steps. In step one, a detailed cycle analysis shows two physically important couplings in the combustor: first, the acoustic compression enhances the spray drop breakup and vaporization, and generates more gaseous fuel for reaction; second, the acoustic compression couples with the unsteady hydrodynamics found in the open-geometry simulation, enhances the fuel/air mixing, and triggers a large amount of heat addition. In step two, a modal analysis using DMD extracts the dynamic features of important modes in the combustor, and identifies the presence of Precessing Vortex Core (PVC) mode and its nonlinear interactions with acoustic modes. Moreover, the DMD analysis helps to establish the couplings between the hydrodynamics and acoustics in terms of frequencies. In step 3, Rayleigh index analysis provides a quantitative assessment of acoustics/combustion couplings and identifies local regions for instability driving/damping. Two modal decomposition techniques, Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD), are assessed in terms of their capabilities in extracting important information from the original simulation dataset and in validating the computational results using the experiment measurement. A POD analysis provides a series of modes with decreasing energy content and it offers an efficient and optimized way to represent a large dataset. The frequency-based DMD technique provides modes that correspond to all single frequencies. For the low-order modeling, fundamental aspects are examined to study necessary conditions, criteria and approaches to develop a reduced-order model (ROM) that is able to represent generic combustion/flame responses, which then can be used in an engineering level tool to provide efficient predictions of combustion instability for practical design applications. Explorations are focused on model reduction techniques by using the so-called POD/Galerkin method. The method uses the numerical solutions of the model equations as the database for building a set of POD eigen-bases. Specifically, the numerical solutions are calculated by perturbing quantities of interest such as the inlet conditions. The POD-derived eigen-bases are, in turn, used in conjunction with a Galerkin procedure to reduce the governing partial differential equation to an ordinary differential equation, which constitutes the ROM. Once the ROM is established, it can then be used as a lower-order test-bed to predict detailed results within certain parametric ranges at a fraction of the cost of solving the full governing equations. A detailed assessment is performed on the method in two parts. In part one, a one-dimensional scalar reaction-advection model equation is used for fundamental investigations, which include verification of the POD eigen-basis calculation and of the ROM development procedure. Moreover, certain criteria during ROM development are established: 1. a necessary number of POD modes that should be included to guarantee a stable ROM; 2. the need for the numerical discretization scheme to be consistent between the original CFD and the developed ROM. Furthermore, the predictive capabilities of the resulting ROM are evaluated to test its limits and to validate the values of applying broadband forcing in improving the ROM performance. In part two, the exploration is extended to a vector system of equations. Using the one-dimensional Euler equation is used as a model equation. A numerical stability issue is identified during the ROM development, the cause of which is further studied and attributed to the normalization methods implemented to generate coupled POD eigen-bases for vector variables. (Abstract shortened by UMI.).

Anthocyanins and flavonols are responsible for purple color of Lablab purpureus (L.) sweet pods.

PubMed

Cui, Baolu; Hu, Zongli; Zhang, Yanjie; Hu, Jingtao; Yin, Wencheng; Feng, Ye; Xie, Qiaoli; Chen, Guoping

2016-06-01

Lablab pods, as dietary vegetable, have high nutritional values similar to most of edible legumes. Moreover, our studies confirmed that purple lablab pods contain the natural pigments of anthocyanins and flavonols. Compared to green pods, five kinds of anthocyanins (malvidin, delphinidin and petunidin derivatives) were found in purple pods by HPLC-ESI-MS/MS and the major contents were delphinidin derivatives. Besides, nine kinds of polyphenol derivatives (quercetin, myricetin, kaempferol and apigenin derivatives) were detected by UPLC-ESI-MS/MS and the major components were quercetin and myricetin derivatives. In order to discover their molecular mechanism, expression patterns of biosynthesis and regulatory gens of anthocyanins and flavonols were investigated. Experimental results showed that LpPAL, LpF3H, LpF3'H, LpDFR, LpANS and LpPAP1 expressions were significantly induced in purple pods compared to green ones. Meanwhile, transcripts of LpFLS were more abundant in purple pods than green or yellow ones, suggestind that co-pigments of anthocyanins and flavonols are accumulated in purple pods. Under continuously dark condition, no anthocyanin accumulation was detected in purple pods and transcripts of LpCHS, LpANS, LpFLS and LpPAP1 were remarkably repressed, indicating that anthocyanins and flavonols biosynthesis in purple pods was regulated in light-dependent manner. These results indicate that co-pigments of anthocyanins and flavonols contribute to purple pigmentations of pods. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Nonlinear model-order reduction for compressible flow solvers using the Discrete Empirical Interpolation Method

NASA Astrophysics Data System (ADS)

Fosas de Pando, Miguel; Schmid, Peter J.; Sipp, Denis

2016-11-01

Nonlinear model reduction for large-scale flows is an essential component in many fluid applications such as flow control, optimization, parameter space exploration and statistical analysis. In this article, we generalize the POD-DEIM method, introduced by Chaturantabut & Sorensen [1], to address nonlocal nonlinearities in the equations without loss of performance or efficiency. The nonlinear terms are represented by nested DEIM-approximations using multiple expansion bases based on the Proper Orthogonal Decomposition. These extensions are imperative, for example, for applications of the POD-DEIM method to large-scale compressible flows. The efficient implementation of the presented model-reduction technique follows our earlier work [2] on linearized and adjoint analyses and takes advantage of the modular structure of our compressible flow solver. The efficacy of the nonlinear model-reduction technique is demonstrated to the flow around an airfoil and its acoustic footprint. We could obtain an accurate and robust low-dimensional model that captures the main features of the full flow.

Researches on the Orbit Determination and Positioning of the Chinese Lunar Exploration Program

NASA Astrophysics Data System (ADS)

Li, P. J.

2015-07-01

This dissertation studies the precise orbit determination (POD) and positioning of the Chinese lunar exploration spacecraft, emphasizing the variety of VLBI (very long baseline interferometry) technologies applied for the deep-space exploration, and their contributions to the methods and accuracies of the precise orbit determination and positioning. In summary, the main contents are as following: In this work, using the real-time data measured by the CE-2 (Chang'E-2) detector, the accuracy of orbit determination is analyzed for the domestic lunar probe under the present condition, and the role played by the VLBI tracking data is particularly reassessed through the precision orbit determination experiments for CE-2. The experiments of the short-arc orbit determination for the lunar probe show that the combination of the ranging and VLBI data with the arc of 15 minutes is able to improve the accuracy by 1-1.5 order of magnitude, compared to the cases for only using the ranging data with the arc of 3 hours. The orbital accuracy is assessed through the orbital overlapping analysis, and the results show that the VLBI data is able to contribute to the CE-2's long-arc POD especially in the along-track and orbital normal directions. For the CE-2's 100 km× 100 km lunar orbit, the position errors are better than 30 meters, and for the CE-2's 15 km× 100 km orbit, the position errors are better than 45 meters. The observational data with the delta differential one-way ranging (Δ DOR) from the CE-2's X-band monitoring and control system experimental are analyzed. It is concluded that the accuracy of Δ DOR delay is dramatically improved with the noise level better than 0.1 ns, and the systematic errors are well calibrated. Although it is unable to support the development of an independent lunar gravity model, the tracking data of CE-2 provided the evaluations of different lunar gravity models through POD, and the accuracies are examined in terms of orbit-to-orbit solution differences for several gravity models. It is found that for the 100 km× 100 km lunar orbit, with a degree and order expansion up to 165, the JPL's gravity model LP165P does not show noticeable improvement over Japan's SGM series models (100× 100), but for the 15 km× 100 km lunar orbit, a higher degree-order model can significantly improve the orbit accuracy. After accomplished its nominal mission, CE-2 launched its extended missions, which involving the L2 mission and the 4179 Toutatis mission. During the flight of the extended missions, the regime offers very little dynamics thus requires an extensive amount of time and tracking data in order to attain a solution. The overlap errors are computed, and it is indicated that the use of VLBI measurements is able to increase the accuracy and reduce the total amount of tracking time. An orbit determination method based on the polynomial fitting is proposed for the CE-3's planned lunar soft landing mission. In this method, spacecraft's dynamic modeling is not necessary, and its noise reduction is expected to be better than that of the point positioning method by making full use of all-arc observational data. The simulation experiments and real data processing showed that the optimal description of the CE-1's free-fall landing trajectory is a set of five-order polynomial functions for each of the position components as well as velocity components in J2000.0. The combination of the VLBI delay, the delay rate data, and the USB (united S-band) ranging data significantly improved the accuracy than the use of USB data alone. In order to determine the position for the CE-3's Lunar Lander, a kinematic statistical method is proposed. This method uses both ranging and VLBI measurements to the lander for a continuous arc, combing with precise knowledge about the motion of the moon as provided by planetary ephemeris, to estimate the lander's position on the lunar surface with high accuracy. Application of the lunar digital elevation model (DEM) as constraints in the lander positioning is helpful. The positioning method for the traverse of lunar rover is also investigated. The integration of delay-rate method is able to achieve higher precise positioning results than the point positioning method. This method provides a wide application of the VLBI data. In the automated sample return mission, the lunar orbit rendezvous and docking are involved. Precise orbit determination using the same-beam VLBI (SBI) measurement for two spacecraft at the same time is analyzed. The simulation results showed that the SBI data is able to improve the absolute and relative orbit accuracy for two targets by 1-2 orders of magnitude. In order to verify the simulation results and test the two-target POD software developed by SHAO (Shanghai Astronomical Observatory), the real SBI data of the SELENE (Selenological and Engineering Explorer) are processed. The POD results for the Rstar and the Vstar showed that the combination of SBI data could significantly improve the accuracy for the two spacecraft, especially for the Vstar with less ranging data, and the POD accuracy is improved by approximate one order of magnitude to the POD accuracy of the Rstar.

Reduced-order model for underwater target identification using proper orthogonal decomposition

NASA Astrophysics Data System (ADS)

Ramesh, Sai Sudha; Lim, Kian Meng

2017-03-01

Research on underwater acoustics has seen major development over the past decade due to its widespread applications in domains such as underwater communication/navigation (SONAR), seismic exploration and oceanography. In particular, acoustic signatures from partially or fully buried targets can be used in the identification of buried mines for mine counter measures (MCM). Although there exist several techniques to identify target properties based on SONAR images and acoustic signatures, these methods first employ a feature extraction method to represent the dominant characteristics of a data set, followed by the use of an appropriate classifier based on neural networks or the relevance vector machine. The aim of the present study is to demonstrate the applications of proper orthogonal decomposition (POD) technique in capturing dominant features of a set of scattered pressure signals, and subsequent use of the POD modes and coefficients in the identification of partially buried underwater target parameters such as its location, size and material density. Several numerical examples are presented to demonstrate the performance of the system identification method based on POD. Although the present study is based on 2D acoustic model, the method can be easily extended to 3D models and thereby enables cost-effective representations of large-scale data.

Environmentally friendly biosorbents (husks, pods and seeds) from Moringa oleifera for Pb(II) removal from contaminated water.

PubMed

Tavares, Fernanda Oliveira; Pinto, Laura Adriane de Moraes; Bassetti, Fátima de Jesus; Vieira, Marcelo Fernandes; Bergamasco, Rosângela; Vieira, Angélica Marquetotti Salcedo

2017-12-01

Lead is a heavy metal considered highly toxic, responsible for causing several health problems as well as being extremely harmful to fauna and flora. Given this fact, several techniques have been studied for the removal of this metal from contaminated water, in which stands out adsorption. In this sense, the objective of this study was to evaluate the potential of lead(II) biosorption from contaminated water by seed husks, seeds and pods of Moringa oleifera Lam (moringa). Biomass was characterized by energy-dispersive X-ray spectroscopy, Scanning Electron Microscopy and Fourier transform infrared spectroscopy analyses. From the studied parameters, the optimal conditions obtained for the three analyzed biosorbents are: 30 min to equilibrium, pH 6 and 25°C temperature. The pseudo-second-order kinetic model was the best fitted to the experimental data for the three evaluated biosorbents. Regarding the adsorption isotherms, the model that best fitted to the experimental data for seed and seed husk was that proposed by Freundlich, and for the pod the Langmuir model. The analysis of the obtained thermodynamic data showed that the adsorption process is favorable and of exothermic nature. Through the results it was concluded that the evaluated biosorbents are efficient in lead(II) biosorption.

Algorithm for Stabilizing a POD-Based Dynamical System

NASA Technical Reports Server (NTRS)

Kalb, Virginia L.

2010-01-01

This algorithm provides a new way to improve the accuracy and asymptotic behavior of a low-dimensional system based on the proper orthogonal decomposition (POD). Given a data set representing the evolution of a system of partial differential equations (PDEs), such as the Navier-Stokes equations for incompressible flow, one may obtain a low-dimensional model in the form of ordinary differential equations (ODEs) that should model the dynamics of the flow. Temporal sampling of the direct numerical simulation of the PDEs produces a spatial time series. The POD extracts the temporal and spatial eigenfunctions of this data set. Truncated to retain only the most energetic modes followed by Galerkin projection of these modes onto the PDEs obtains a dynamical system of ordinary differential equations for the time-dependent behavior of the flow. In practice, the steps leading to this system of ODEs entail numerically computing first-order derivatives of the mean data field and the eigenfunctions, and the computation of many inner products. This is far from a perfect process, and often results in the lack of long-term stability of the system and incorrect asymptotic behavior of the model. This algorithm describes a new stabilization method that utilizes the temporal eigenfunctions to derive correction terms for the coefficients of the dynamical system to significantly reduce these errors.

Assessment of Closed Point-of-Dispensing (POD) Preparedness in St. Louis County, Missouri, 2012-2016.

PubMed

Rebmann, Terri; Anthony, John; Loux, Travis M; Mulroy, Julia; Sitzes, Rikki

Little is known about closed point-of-dispensing (POD) site preparedness-especially how these entities progress in their preparedness efforts over time. The purpose of this study was to assess the preparedness of a closed POD network. Between 2012 and 2016, 30% to 50% of POD entities in the St. Louis County region were assessed each year, for a total of 138 site evaluations from 62 entities. The assessment tool included 41 components of closed POD preparedness, each scored either 0 = not met or 1 = met. POD preparedness scores could range from 0 to 41. Chi-square tests were conducted to compare the percentage of entities that had each preparedness indicator. A multilevel linear model with a random intercept for each agency was used to model longitudinal changes in closed POD preparedness. POD preparedness scores were higher in 2016 than in 2012 (31.5 vs. 26.5, t = 14.3, p < .001); however, there was a negative yearly trend in preparedness, and, on average, entities met only 65.4% of the preparedness indicators. Only a third of entities reported hosting a POD exercise at least once every 2 years (32.3%, n = 20). From the multilevel regression, determinants of better POD preparedness include having been assessed more often, employing a business continuity expert, and not being a long-term care agency. Closed POD entities should continue to work toward better preparedness, to better ensure successful deployment. Findings from this study indicate that more frequent assessments likely enhance preparedness at closed POD entities.

Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings

DTIC Science & Technology

2016-09-02

MODELS USING EDMD (a) ( b ) (c) (d) ( e ) (f) (g) (h... Model EDMD Model , β = 0.5 EDMD Model , optimal β ( b ) Model order 5 10 15 20 25 L im it c y c le f re q u e n c y 0.12 0.125 0.13 0.135 0.14 0.145...GP and EDMD nonlinear models in predicting the evolution of POD coefficients for transitional flow past a cylinder, showing (a) time evolution and ( b

The effects of iPod and text-messaging use on driver distraction: a bio-behavioral analysis.

PubMed

Mouloua, M; Ahern, A; Quevedo, A; Jaramillo, D; Rinalducci, E; Smither, J; Alberti, P; Brill, C

2012-01-01

This study was designed to empirically examine the effects of iPod device and text-messaging activities on driver distraction. Sixty participants were asked to perform a driving simulation task while searching for songs using an iPod device or text messaging. Driving errors as measured by lane deviations were recorded and analyzed as a function of the distracters. Physiological measures (EEG) were also recorded during the driving phases in order to measure participant levels of cortical arousal. It was hypothesized that iPod use and text messaging would result in a profound effect on driving ability. The results showed a significant effect of iPod use and text-messaging on driving performance. Increased numbers of driving errors were recorded during the iPod and text-messaging phases than the pre- and post-allocation phases. Higher levels of Theta activity were also observed during the iPod and Text-messaging phase than the pre- and post-allocation phases. Implications for in-vehicle systems design, training, and safety are also discussed.

Reduced-Order Modeling: Cooperative Research and Development at the NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Silva, Walter A.; Beran, Philip S.; Cesnik, Carlos E. S.; Guendel, Randal E.; Kurdila, Andrew; Prazenica, Richard J.; Librescu, Liviu; Marzocca, Piergiovanni; Raveh, Daniella E.

2001-01-01

Cooperative research and development activities at the NASA Langley Research Center (LaRC) involving reduced-order modeling (ROM) techniques are presented. Emphasis is given to reduced-order methods and analyses based on Volterra series representations, although some recent results using Proper Orthogonal Deco in position (POD) are discussed as well. Results are reported for a variety of computational and experimental nonlinear systems to provide clear examples of the use of reduced-order models, particularly within the field of computational aeroelasticity. The need for and the relative performance (speed, accuracy, and robustness) of reduced-order modeling strategies is documented. The development of unsteady aerodynamic state-space models directly from computational fluid dynamics analyses is presented in addition to analytical and experimental identifications of Volterra kernels. Finally, future directions for this research activity are summarized.

Effect of Time Varying Gravity on DORIS processing for ITRF2013

NASA Astrophysics Data System (ADS)

Zelensky, N. P.; Lemoine, F. G.; Chinn, D. S.; Beall, J. W.; Melachroinos, S. A.; Beckley, B. D.; Pavlis, D.; Wimert, J.

2013-12-01

Computations are under way to develop a new time series of DORIS SINEX solutions to contribute to the development of the new realization of the terrestrial reference frame (c.f. ITRF2013). One of the improvements that are envisaged is the application of improved models of time-variable gravity in the background orbit modeling. At GSFC we have developed a time series of spherical harmonics to degree and order 5 (using the GOC02S model as a base), based on the processing of SLR and DORIS data to 14 satellites from 1993 to 2013. This is compared with the standard approach used in ITRF2008, based on the static model EIGEN-GL04S1 which included secular variations in only a few select coefficients. Previous work on altimeter satellite POD (c.f. TOPEX/Poseidon, Jason-1, Jason-2) has shown that the standard model is not adequate and orbit improvements are observed with application of more detailed models of time-variable gravity. In this study, we quantify the impact of TVG modeling on DORIS satellite POD, and ascertain the impact on DORIS station positions estimated weekly from 1993 to 2013. The numerous recent improvements to SLR and DORIS processing at GSFC include a more complete compliance to IERS2010 standards, improvements to SLR/DORIS measurement modeling, and improved non-conservative force modeling to DORIS satellites. These improvements will affect gravity coefficient estimates, POD, and the station solutions. Tests evaluate the impact of time varying gravity on tracking data residuals, station consistency, and the geocenter and scale reference frame parameters.

An improved algorithm for balanced POD through an analytic treatment of impulse response tails

NASA Astrophysics Data System (ADS)

Tu, Jonathan H.; Rowley, Clarence W.

2012-06-01

We present a modification of the balanced proper orthogonal decomposition (balanced POD) algorithm for systems with simple impulse response tails. In this new method, we use dynamic mode decomposition (DMD) to estimate the slowly decaying eigenvectors that dominate the long-time behavior of the direct and adjoint impulse responses. This is done using a new, low-memory variant of the DMD algorithm, appropriate for large datasets. We then formulate analytic expressions for the contribution of these eigenvectors to the controllability and observability Gramians. These contributions can be accounted for in the balanced POD algorithm by simply appending the impulse response snapshot matrices (direct and adjoint, respectively) with particular linear combinations of the slow eigenvectors. Aside from these additions to the snapshot matrices, the algorithm remains unchanged. By treating the tails analytically, we eliminate the need to run long impulse response simulations, lowering storage requirements and speeding up ensuing computations. To demonstrate its effectiveness, we apply this method to two examples: the linearized, complex Ginzburg-Landau equation, and the two-dimensional fluid flow past a cylinder. As expected, reduced-order models computed using an analytic tail match or exceed the accuracy of those computed using the standard balanced POD procedure, at a fraction of the cost.

Reduced order modeling and active flow control of an inlet duct

NASA Astrophysics Data System (ADS)

Ge, Xiaoqing

Many aerodynamic applications require the modeling of compressible flows in or around a body, e.g., the design of aircraft, inlet or exhaust duct, wind turbines, or tall buildings. Traditional methods use wind tunnel experiments and computational fluid dynamics (CFD) to investigate the spatial and temporal distribution of the flows. Although they provide a great deal of insight into the essential characteristics of the flow field, they are not suitable for control analysis and design due to the high physical/computational cost. Many model reduction methods have been studied to reduce the complexity of the flow model. There are two main approaches: linearization based input/output modeling and proper orthogonal decomposition (POD) based model reduction. The former captures mostly the local behavior near a steady state, which is suitable to model laminar flow dynamics. The latter obtains a reduced order model by projecting the governing equation onto an "optimal" subspace and is able to model complex nonlinear flow phenomena. In this research we investigate various model reduction approaches and compare them in flow modeling and control design. We propose an integrated model-based control methodology and apply it to the reduced order modeling and active flow control of compressible flows within a very aggressive (length to exit diameter ratio, L/D, of 1.5) inlet duct and its upstream contraction section. The approach systematically applies reduced order modeling, estimator design, sensor placement and control design to improve the aerodynamic performance. The main contribution of this work is the development of a hybrid model reduction approach that attempts to combine the best features of input/output model identification and POD method. We first identify a linear input/output model by using a subspace algorithm. We next project the difference between CFD response and the identified model response onto a set of POD basis. This trajectory is fit to a nonlinear dynamical model to augment the linear input/output model. Thus, the full system is decomposed into a dominant linear subsystem and a low order nonlinear subsystem. The hybrid model is then used for control design and compared with other modeling methods in CFD simulations. Numerical results indicate that the hybrid model accurately predicts the nonlinear behavior of the flow for a 2D diffuser contraction section model. It also performs best in terms of feedback control design and learning control. Since some outputs of interest (e.g., the AIP pressure recovery) are not observable during normal operations, static and dynamic estimators are designed to recreate the information from available sensor measurements. The latter also provides a state estimation for feedback controller. Based on the reduced order models and estimators, different controllers are designed to improve the aerodynamic performance of the contraction section and inlet duct. The integrated control methodology is evaluated with CFD simulations. Numerical results demonstrate the feasibility and efficacy of the active flow control based on reduced order models. Our reduced order models not only generate a good approximation of the nonlinear flow dynamics over a wide input range, but also help to design controllers that significantly improve the flow response. The tools developed for model reduction, estimator and control design can also be applied to wind tunnel experiment.

NDE reliability and probability of detection (POD) evolution and paradigm shift

NASA Astrophysics Data System (ADS)

Singh, Surendra

2014-02-01

The subject of NDE Reliability and POD has gone through multiple phases since its humble beginning in the late 1960s. This was followed by several programs including the important one nicknamed "Have Cracks - Will Travel" or in short "Have Cracks" by Lockheed Georgia Company for US Air Force during 1974-1978. This and other studies ultimately led to a series of developments in the field of reliability and POD starting from the introduction of fracture mechanics and Damaged Tolerant Design (DTD) to statistical framework by Bernes and Hovey in 1981 for POD estimation to MIL-STD HDBK 1823 (1999) and 1823A (2009). During the last decade, various groups and researchers have further studied the reliability and POD using Model Assisted POD (MAPOD), Simulation Assisted POD (SAPOD), and applying Bayesian Statistics. All and each of these developments had one objective, i.e., improving accuracy of life prediction in components that to a large extent depends on the reliability and capability of NDE methods. Therefore, it is essential to have a reliable detection and sizing of large flaws in components. Currently, POD is used for studying reliability and capability of NDE methods, though POD data offers no absolute truth regarding NDE reliability, i.e., system capability, effects of flaw morphology, and quantifying the human factors. Furthermore, reliability and POD have been reported alike in meaning but POD is not NDE reliability. POD is a subset of the reliability that consists of six phases: 1) samples selection using DOE, 2) NDE equipment setup and calibration, 3) System Measurement Evaluation (SME) including Gage Repeatability &Reproducibility (Gage R&R) and Analysis Of Variance (ANOVA), 4) NDE system capability and electronic and physical saturation, 5) acquiring and fitting data to a model, and data analysis, and 6) POD estimation. This paper provides an overview of all major POD milestones for the last several decades and discuss rationale for using Integrated Computational Materials Engineering (ICME), MAPOD, SAPOD, and Bayesian statistics for studying controllable and non-controllable variables including human factors for estimating POD. Another objective is to list gaps between "hoped for" versus validated or fielded failed hardware.

Reduced dynamical model of the vibrations of a metal plate

NASA Astrophysics Data System (ADS)

Moreno, D.; Barrientos, Bernardino; Perez-Lopez, Carlos; Mendoza-Santoyo, Fernando; Guerrero, J. A.; Funes, M.

2005-02-01

The Proper Orthogonal Decomposition (POD) method is applied to the vibrations analysis of a metal plate. The data obtained from the metal plate under vibrations were measured with a laser vibrometer. The metal plate was subject to vibrations with an electrodynamical shaker in a range of frequencies from 100 to 5000 Hz. The deformation measurements were taken on a quarter of the plate in a rectangular grid of 7 x 8 points. The plate deformation measurements were used to calculate the eigenfunctions and the eigenvalues. It was found that a large fraction of the total energy of the deformation is contained within the first six POD modes. The essential features of the deformation are thus described by only the six first eigenfunctions. A reduced order model for the dynamical behavior is then constructed using Galerkin projection of the equation of motion for the vertical displacement of a plate.

Effects of a military cargo pod and tail fins on the aerodynamic characteristics of a large wide-body transport model

NASA Technical Reports Server (NTRS)

Jernell, L. S.; Croom, D. R.

1979-01-01

Wind tunnel tests were conducted on a 0.03 scale model of a large wide-body commercial aircraft to determine the effects on the static aerodynamic characteristics resulting from the attachment of a belly pod for the long-range deployment of outsize military equipment. The effectiveness of horizontal-tip fins in augmenting directional stability was investigated. At a test Reynolds number of 1.08 x 1,000,000, the addition of the pod results in an increase in total drag of approximately 20 percent. Trim drag due to the pod is very small. Although the pod produces a significant decrease in directional stability, the addition of the tip fins restores some of the stability, particularly at the lower angles of attack.

A numerical study of different projection-based model reduction techniques applied to computational homogenisation

NASA Astrophysics Data System (ADS)

Soldner, Dominic; Brands, Benjamin; Zabihyan, Reza; Steinmann, Paul; Mergheim, Julia

2017-10-01

Computing the macroscopic material response of a continuum body commonly involves the formulation of a phenomenological constitutive model. However, the response is mainly influenced by the heterogeneous microstructure. Computational homogenisation can be used to determine the constitutive behaviour on the macro-scale by solving a boundary value problem at the micro-scale for every so-called macroscopic material point within a nested solution scheme. Hence, this procedure requires the repeated solution of similar microscopic boundary value problems. To reduce the computational cost, model order reduction techniques can be applied. An important aspect thereby is the robustness of the obtained reduced model. Within this study reduced-order modelling (ROM) for the geometrically nonlinear case using hyperelastic materials is applied for the boundary value problem on the micro-scale. This involves the Proper Orthogonal Decomposition (POD) for the primary unknown and hyper-reduction methods for the arising nonlinearity. Therein three methods for hyper-reduction, differing in how the nonlinearity is approximated and the subsequent projection, are compared in terms of accuracy and robustness. Introducing interpolation or Gappy-POD based approximations may not preserve the symmetry of the system tangent, rendering the widely used Galerkin projection sub-optimal. Hence, a different projection related to a Gauss-Newton scheme (Gauss-Newton with Approximated Tensors- GNAT) is favoured to obtain an optimal projection and a robust reduced model.

Computationally efficient simulation of unsteady aerodynamics using POD on the fly

NASA Astrophysics Data System (ADS)

Moreno-Ramos, Ruben; Vega, José M.; Varas, Fernando

2016-12-01

Modern industrial aircraft design requires a large amount of sufficiently accurate aerodynamic and aeroelastic simulations. Current computational fluid dynamics (CFD) solvers with aeroelastic capabilities, such as the NASA URANS unstructured solver FUN3D, require very large computational resources. Since a very large amount of simulation is necessary, the CFD cost is just unaffordable in an industrial production environment and must be significantly reduced. Thus, a more inexpensive, yet sufficiently precise solver is strongly needed. An opportunity to approach this goal could follow some recent results (Terragni and Vega 2014 SIAM J. Appl. Dyn. Syst. 13 330-65 Rapun et al 2015 Int. J. Numer. Meth. Eng. 104 844-68) on an adaptive reduced order model that combines ‘on the fly’ a standard numerical solver (to compute some representative snapshots), proper orthogonal decomposition (POD) (to extract modes from the snapshots), Galerkin projection (onto the set of POD modes), and several additional ingredients such as projecting the equations using a limited amount of points and fairly generic mode libraries. When applied to the complex Ginzburg-Landau equation, the method produces acceleration factors (comparing with standard numerical solvers) of the order of 20 and 300 in one and two space dimensions, respectively. Unfortunately, the extension of the method to unsteady, compressible flows around deformable geometries requires new approaches to deal with deformable meshes, high-Reynolds numbers, and compressibility. A first step in this direction is presented considering the unsteady compressible, two-dimensional flow around an oscillating airfoil using a CFD solver in a rigidly moving mesh. POD on the Fly gives results whose accuracy is comparable to that of the CFD solver used to compute the snapshots.

Binomial Test Method for Determining Probability of Detection Capability for Fracture Critical Applications

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2011-01-01

The capability of an inspection system is established by applications of various methodologies to determine the probability of detection (POD). One accepted metric of an adequate inspection system is that for a minimum flaw size and all greater flaw sizes, there is 0.90 probability of detection with 95% confidence (90/95 POD). Directed design of experiments for probability of detection (DOEPOD) has been developed to provide an efficient and accurate methodology that yields estimates of POD and confidence bounds for both Hit-Miss or signal amplitude testing, where signal amplitudes are reduced to Hit-Miss by using a signal threshold Directed DOEPOD uses a nonparametric approach for the analysis or inspection data that does require any assumptions about the particular functional form of a POD function. The DOEPOD procedure identifies, for a given sample set whether or not the minimum requirement of 0.90 probability of detection with 95% confidence is demonstrated for a minimum flaw size and for all greater flaw sizes (90/95 POD). The DOEPOD procedures are sequentially executed in order to minimize the number of samples needed to demonstrate that there is a 90/95 POD lower confidence bound at a given flaw size and that the POD is monotonic for flaw sizes exceeding that 90/95 POD flaw size. The conservativeness of the DOEPOD methodology results is discussed. Validated guidelines for binomial estimation of POD for fracture critical inspection are established.

Effect of ovule position within the pod on the probability of seed production in Bauhinia ungulata (Fabaceae).

PubMed

Mena-Alí, Jorge I; Rocha, Oscar J

2005-02-01

It has been claimed that ovules linearly ordered within a fruit differ in their probabilities of reaching maturity. This was investigated by studying the effect the position of an ovule within the pod has on seed abortion and seed production in Bauhinia ungulata. Fruits collected during the dry seasons of 1999, 2000 and 2001 were opened, and the number, position and status of each ovule within the fruit were recorded. A GLM model was used to assess the effects of population, tree identity and ovule position within the pod on ovule fertilization, seed abortion, seed damage and seed maturation in two populations of B. ungulata. Nearly 30% of the ovules were not fertilized in 1999; this percentage dropped to 5% the following two years. Seed abortion (50%) and seed damage (15%) were the same every year during the study period. Only 15% of the initial ovules developed into mature seeds in 1999; this value increased to 35% in 2000 and 2001. However, seed survivorship was dependent on the position of the ovule within the pod; non-fertilized and early aborted ovules were found more often near the basal end of the ovary. The frequency of seed damage was not affected by position. Mature seeds were found mainly in the stylar half of fruits, where ovules are likely to be fertilized by fast pollen tubes. The pattern of seed production in B. ungulata is non-random but is dependent upon the position of the ovule within the pod. The results suggest that the seeds produced within a fruit might differ in their vigour.

Acid soil infertility effects on peanut yields and yield components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blamey, F.P.C.

1983-01-01

The interpretation of soil amelioration experiments with peanuts is made difficult by the unpredictibility of the crop and by the many factors altered when ameliorating acid soils. The present study was conducted to investigate the effects of lime and gypsum applications on peanut kernel yield via the three first order yield components, pods per ha, kernels per pod, and kernel mass. On an acid medium sandy loam soil (typic Plinthustult), liming resulted in a highly significant kernel yield increase of 117% whereas gypsum applications were of no significant benefit. As indicated by path coefficient analysis, an increase in the numbermore » of pods per ha was markedly more important in increasing yield than an increase in either the number of kernels per pod or kernel mass. Furthermore, exch. Al was found to be particularly detrimental to pod number. It was postulated that poor peanut yields resulting from acid soil infertility were mainly due to the depressive effect of exch. Al on pod number. Exch. Ca appeared to play a secondary role by ameliorating the adverse effects of exch. Al.« less

Cowpea pod (Vigna unguiculata) biomass as a low-cost biosorbent for removal of Pb(II) ions from aqueous solution.

PubMed

Guyo, U; Moyo, M

2017-01-01

The use of cowpea pod (CPP) biomass for the removal of Pb(II) ions from aqueous solution was investigated. The effects of factors such as dosage concentration (0.2 to 1.6 g L -1 ), pH (2 to 8), contact time (5 to 120 min), metal ion concentrations (10 to 80 mg L -1 ) and temperature (20 to 50 °C) were examined through batch studies. The biosorption data conformed best to the Langmuir model at the three working temperatures (20, 30 and 40 °C) as revealed by the correlation coefficients (R 2 ) which were greater than 0.940. The maximum sorption capacity of the CPP for Pb(II) was 32.96 mg g -1 at 313 K. Furthermore, the kinetic data fitted well to the pseudo-second-order model as it had the lowest sum of square error (SSE) values and correlation coefficients close to unity (R 2  > 0.999). The thermodynamic parameters (ΔG°, ΔS° and ΔH°) showed that the biosorption process was spontaneous, feasible and endothermic. The results obtained in the present study indicated that cowpea pod biomass could be used for the effective removal of Pb(II) from aqueous solution.

Construction of reduced order models for the non-linear Navier-Stokes equations using the proper orthogonal fecomposition (POD)/Galerkin method.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fike, Jeffrey A.

2013-08-01

The construction of stable reduced order models using Galerkin projection for the Euler or Navier-Stokes equations requires a suitable choice for the inner product. The standard L2 inner product is expected to produce unstable ROMs. For the non-linear Navier-Stokes equations this means the use of an energy inner product. In this report, Galerkin projection for the non-linear Navier-Stokes equations using the L2 inner product is implemented as a first step toward constructing stable ROMs for this set of physics.

NDE reliability and probability of detection (POD) evolution and paradigm shift

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Surendra

2014-02-18

The subject of NDE Reliability and POD has gone through multiple phases since its humble beginning in the late 1960s. This was followed by several programs including the important one nicknamed “Have Cracks – Will Travel” or in short “Have Cracks” by Lockheed Georgia Company for US Air Force during 1974–1978. This and other studies ultimately led to a series of developments in the field of reliability and POD starting from the introduction of fracture mechanics and Damaged Tolerant Design (DTD) to statistical framework by Bernes and Hovey in 1981 for POD estimation to MIL-STD HDBK 1823 (1999) and 1823Amore » (2009). During the last decade, various groups and researchers have further studied the reliability and POD using Model Assisted POD (MAPOD), Simulation Assisted POD (SAPOD), and applying Bayesian Statistics. All and each of these developments had one objective, i.e., improving accuracy of life prediction in components that to a large extent depends on the reliability and capability of NDE methods. Therefore, it is essential to have a reliable detection and sizing of large flaws in components. Currently, POD is used for studying reliability and capability of NDE methods, though POD data offers no absolute truth regarding NDE reliability, i.e., system capability, effects of flaw morphology, and quantifying the human factors. Furthermore, reliability and POD have been reported alike in meaning but POD is not NDE reliability. POD is a subset of the reliability that consists of six phases: 1) samples selection using DOE, 2) NDE equipment setup and calibration, 3) System Measurement Evaluation (SME) including Gage Repeatability and Reproducibility (Gage R and R) and Analysis Of Variance (ANOVA), 4) NDE system capability and electronic and physical saturation, 5) acquiring and fitting data to a model, and data analysis, and 6) POD estimation. This paper provides an overview of all major POD milestones for the last several decades and discuss rationale for using Integrated Computational Materials Engineering (ICME), MAPOD, SAPOD, and Bayesian statistics for studying controllable and non-controllable variables including human factors for estimating POD. Another objective is to list gaps between “hoped for” versus validated or fielded failed hardware.« less

Effects of preoperative oral carbohydrate supplementation on postoperative metabolic stress response of patients undergoing elective abdominal surgery.

PubMed

Viganò, Jacopo; Cereda, Emanuele; Caccialanza, Riccardo; Carini, Roberta; Cameletti, Barbara; Spampinato, Marcello; Dionigi, Paolo

2012-08-01

The goal of the present study was to evaluate the effects of preoperative oral carbohydrate supplementation (OCH) on the postoperative metabolic stress response of patients undergoing elective abdominal surgery. The study was designed as a controlled, prospective, cohort study including 38 patients treated with OCH (800 mL the day before surgery and 400 mL within 3 h before the induction of anesthesia) and 38 controls matched for surgical procedure. Fasting glucose, insulin, insulin resistance (HOMA-IR index), cortisol, and interleukin 6 (IL-6) were assessed before and after surgery (postoperative day (POD) 1, 2, and 3). The administration of OCH resulted in lower fasting glucose, HOMA-IR index, cortisol, and IL-6 on both POD 1 and POD 2. At multivariable regression analyses, the reduction of these parameters was independent of sex, age, body mass index, and major abdominal surgery. Particularly, models including OCH treatment explained 70, 63, and 66 % of the variance of the increase in IL-6 levels at POD 1, POD 2, and POD 3, respectively. The effect of OCH on changes in glucose, insulin resistance, and cortisol on POD 1 and POD 2 disappeared after the inclusion of IL-6 in the models. Treatment with OCH was associated with attenuation of the postoperative metabolic stress response. We hypothesize that modulation of the inflammatory response is one of the mechanisms involved.

Recent Survey and Application of the simSUNDT Software

NASA Astrophysics Data System (ADS)

Persson, G.; Wirdelius, H.

2010-02-01

The simSUNDT software is based on a previous developed program (SUNDT). The latest version has been customized in order to generate realistic synthetic data (including a grain noise model), compatible with a number of off-line analysis software. The software consists of a Windows®-based preprocessor and postprocessor together with a mathematical kernel (UTDefect), dealing with the actual mathematical modeling. The model employs various integral transforms and integral equation and enables simulations of the entire ultrasonic testing situation. The model is completely three-dimensional though the simulated component is two-dimensional, bounded by the scanning surface and a planar back surface as an option. It is of great importance that inspection methods that are applied are proper validated and that their capability of detection of cracks and defects are quantified. In order to achieve this, statistical methods such as Probability of Detection (POD) often are applied, with the ambition to estimate the detectability as a function of defect size. Despite the fact that the proposed procedure with the utilization of test pieces is very expensive, it also tends to introduce a number of possible misalignments between the actual NDT situation that is to be performed and the proposed experimental simulation. The presentation will describe the developed model that will enable simulation of a phased array NDT inspection and the ambition to use this simulation software to generate POD information. The paper also includes the most recent developments of the model including some initial experimental validation of the phased array probe model.

Dermal Wound Transcriptomic Responses to Infection with Pseudomonas aeruginosa versus Klebsiella pneumoniae in a Rabbit Ear Wound Model

DTIC Science & Technology

2014-05-02

harvested on POD4 for microarray and transcriptome analysis. Other wounds received topical antibiotic after infection for 24 hours to promote biofilm ...cell toxicity in response to a more damaging P.a. inflammatory milieu. The POD6 wounds were colonized with biofilm but expressed magnitudes fewer...infection for 24 hours to promote biofilm development, and were harvested on POD6 or POD12. Results: Wounds infected for 24 hours, relative to uninfected

Spatial optimization of operationally relevant large fire confine and point protection strategies: Model development and test cases

Treesearch

Yu Wei; Matthew P. Thompson; Jessica R. Haas; Gregory K. Dillon; Christopher D. O’Connor

2018-01-01

This study introduces a large fire containment strategy that builds upon recent advances in spatial fire planning, notably the concept of potential wildland fire operation delineations (PODs). Multiple PODs can be clustered together to form a “box” that is referred as the “response POD” (or rPOD). Fire lines would be built along the boundary of an rPOD to contain a...

Local analgesic effect of tramadol is mediated by opioid receptors in late postoperative pain after plantar incision in rats.

PubMed

de Oliveira Junior, José Oswaldo; de Freitas, Milena Fernandes; Bullara de Andrade, Carolina; Chacur, Marucia; Ashmawi, Hazem Adel

2016-01-01

Tramadol is a drug used to treat moderate to severe pain. It is known to present a peripheral effect, but the local mechanisms underlying its actions remain unclear. The role of peripheral opioid receptors in postoperative pain is not well understood. In the present study, we examined the peripheral opioid receptors to determine the local effect of tramadol in a plantar incision pain model. Rats were subjected to plantar incision and divided into four groups on postoperative day (POD) 1: SF_SF, 0.9% NaCl injected into the right hindpaw; SF_TraI, 0.9% NaCl and tramadol injected into the right hindpaw; SF_TraC, 0.9% NaCl and tramadol injected into the contralateral hindpaw; and Nal_Tra, naloxone and tramadol injected into the ipsilateral hindpaw. To determine the animals' nociceptive threshold, mechanical hyperalgesia was measured before incision, on POD1 before treatment and at 15, 30, 45, and 60 minutes after the incision. The same procedure was repeated on the POD2. The expression levels of μ-opioid receptor (MOR) and δ-opioid receptor (DOR) were obtained through immunoblotting assays in the lumbar dorsal root ganglia (L3-L6) in naïve rats and 1, 2, 3, and 7 days after the incision. Our results showed that the plantar incision was able to cause an increase in mechanical hyperalgesia and that tramadol reversed this hyperalgesia on POD1 and POD2. Tramadol injections in the contralateral paw did not affect the animals' nociceptive threshold. Naloxone was able to antagonize the tramadol effect partially on POD1 and completely on POD2. The DOR expression increased on POD2, POD3, and POD7, whereas the MOR expression did not change. Together, our results show that tramadol promoted a local analgesic effect in the postoperative pain model that was antagonized by naloxone in POD2, alongside the increase of DOR expression.

Vascular Endothelial Growth Factor-A165b Restores Normal Glomerular Water Permeability in a Diphtheria-Toxin Mouse Model of Glomerular Injury.

PubMed

Stevens, Megan; Neal, Christopher R; Salmon, Andrew H J; Bates, David O; Harper, Steven J; Oltean, Sebastian

2018-01-01

Genetic cell ablation using the human diphtheria toxin receptor (hDTR) is a new strategy used for analysing cellular function. Diphtheria toxin (DT) is a cytotoxic protein that leaves mouse cells relatively unaffected, but upon binding to hDTR it ultimately leads to cell death. We used a podocyte-specific hDTR expressing (Pod-DTR) mouse to assess the anti-permeability and cyto-protective effects of the splice isoform vascular endothelial growth factor (VEGF-A165b). The Pod-DTR mouse was crossed with a mouse that over-expressed VEGF-A165b specifically in the podocytes (Neph-VEGF-A165b). Wild type (WT), Pod-DTR, Neph-VEGF-A165b and Pod-DTR X Neph-VEGF-A165b mice were treated with several doses of DT (1, 5, 100, and 1,000 ng/g bodyweight). Urine was collected and the glomerular water permeability (LpA/Vi) was measured ex vivo after 14 days. Structural analysis and podocyte marker expression were also assessed. Pod-DTR mice developed an increased glomerular LpA/Vi 14 days after administration of DT (all doses), which was prevented when the mice over-expressed VEGF-A165b. No major structural abnormalities, podocyte ablation or albuminuria was observed in Pod-DTR mice, indicating this to be a mild model of podocyte disease. However, a change in expression and localisation of nephrin within the podocytes was observed, indicating disruption of the slit diaphragm in the Pod-DTR mice. This was prevented in the Pod-DTR X Neph-VEGF-A165b mice. Although only a mild model of podocyte injury, over-expression of the anti-permeability VEGF-A165b isoform in the podocytes of Pod-DTR mice had a protective effect. Therefore, this study further highlights the therapeutic potential of VEGF-A165b in glomerular disease. © 2018 The Author(s) Published by S. Karger AG, Basel.

TreePOD: Sensitivity-Aware Selection of Pareto-Optimal Decision Trees.

PubMed

Muhlbacher, Thomas; Linhardt, Lorenz; Moller, Torsten; Piringer, Harald

2018-01-01

Balancing accuracy gains with other objectives such as interpretability is a key challenge when building decision trees. However, this process is difficult to automate because it involves know-how about the domain as well as the purpose of the model. This paper presents TreePOD, a new approach for sensitivity-aware model selection along trade-offs. TreePOD is based on exploring a large set of candidate trees generated by sampling the parameters of tree construction algorithms. Based on this set, visualizations of quantitative and qualitative tree aspects provide a comprehensive overview of possible tree characteristics. Along trade-offs between two objectives, TreePOD provides efficient selection guidance by focusing on Pareto-optimal tree candidates. TreePOD also conveys the sensitivities of tree characteristics on variations of selected parameters by extending the tree generation process with a full-factorial sampling. We demonstrate how TreePOD supports a variety of tasks involved in decision tree selection and describe its integration in a holistic workflow for building and selecting decision trees. For evaluation, we illustrate a case study for predicting critical power grid states, and we report qualitative feedback from domain experts in the energy sector. This feedback suggests that TreePOD enables users with and without statistical background a confident and efficient identification of suitable decision trees.

Development of post-harvest protocol of okra for export marketing.

PubMed

Dhall, R K; Sharma, S R; Mahajan, B V C

2014-08-01

The study was carried out on the harvesting and handling methods of okra with the objective to maintain the best quality of pods from harvesting to end consumer especially for export marketing. For that purpose okra cv. 'Punjab-8' pods were harvested with minimum handling (least injuries to the pubescence on the ridges of pod) and normal handling (no safety taken to prevent injuries on pods). Pods were precooled at 15 ± 1ºC, 90-95% RH; jumble packed in the CFB boxes of 2.0 Kg capacity and than stored at 8 ± 1ºC, 90-95% RH. The quality parameters of okra namely texture, chlorophyll content, physiological loss in weight, rotting percentage and general appearance were studied. The pods harvested with minimum handling and field packaging can retain their green colour, crisp texture (maximum force to puncture pod = 500.2 g) with minimum rotting (3.0%) and physiological loss in weight (15.8%) and good appearance upto 13 days of cold storage whereas normal handled pods can be stored upto 5 days at 8 ± 1ºC, 90-95% RH and thereafter lost their general appearance on the 7th day of storage and were discarded. Therefore, in order to maintain high quality of okra from harvesting to the final destination (consumer), the okra pods should be harvested with minimum handling followed by field packaging in CFB boxes.

Shade tree spatial structure and pod production explain frosty pod rot intensity in cacao agroforests, Costa Rica.

PubMed

Gidoin, Cynthia; Avelino, Jacques; Deheuvels, Olivier; Cilas, Christian; Bieng, Marie Ange Ngo

2014-03-01

Vegetation composition and plant spatial structure affect disease intensity through resource and microclimatic variation effects. The aim of this study was to evaluate the independent effect and relative importance of host composition and plant spatial structure variables in explaining disease intensity at the plot scale. For that purpose, frosty pod rot intensity, a disease caused by Moniliophthora roreri on cacao pods, was monitored in 36 cacao agroforests in Costa Rica in order to assess the vegetation composition and spatial structure variables conducive to the disease. Hierarchical partitioning was used to identify the most causal factors. Firstly, pod production, cacao tree density and shade tree spatial structure had significant independent effects on disease intensity. In our case study, the amount of susceptible tissue was the most relevant host composition variable for explaining disease intensity by resource dilution. Indeed, cacao tree density probably affected disease intensity more by the creation of self-shading rather than by host dilution. Lastly, only regularly distributed forest trees, and not aggregated or randomly distributed forest trees, reduced disease intensity in comparison to plots with a low forest tree density. A regular spatial structure is probably crucial to the creation of moderate and uniform shade as recommended for frosty pod rot management. As pod production is an important service expected from these agroforests, shade tree spatial structure may be a lever for integrated management of frosty pod rot in cacao agroforests.

Application of low-dimensional techniques for closed-loop control of turbulent flows

NASA Astrophysics Data System (ADS)

Ausseur, Julie

The groundwork for an advanced closed-loop control of separated shear layer flows is laid out in this document. The experimental testbed for the present investigation is the turbulent flow over a NACA-4412 model airfoil tested in the Syracuse University subsonic wind tunnel at Re=135,000. The specified control objective is to delay separation - or stall - by constantly keeping the flow attached to the surface of the wing. The proper orthogonal decomposition (POD) is shown to he a valuable tool to provide a low-dimensional estimate of the flow state and the first POD expansion coefficient is proposed to he used as the control variable. Other reduced-order techniques such as the modified linear and quadratic stochastic measurement methods (mLSM, mQSM) are applied to reduce the complexity of the flow field and their ability to accurately estimate the flow state from surface pressure measurements alone is examined. A simple proportional feedback control is successfully implemented in real-time using these tools and flow separation is efficiently delayed by over 3 degrees angle of attack. To further improve the quality of the flow state estimate, the implementation of a Kalman filter is foreseen, in which the knowledge of the flow dynamics is added to the computation of the control variable to correct for the potential measurement errors. To this aim, a reduced-order model (ROM) of the flow is developed using the least-squares method to obtain the coefficients of the POD/Galerkin projection of the Navier-Stokes equations from experimental data. To build the training ensemble needed in this experimental procedure, the spectral mLSM is performed to generate time-resolved series of POD expansion coefficients from which temporal derivatives are computed. This technique, which is applied to independent PIV velocity snapshots and time-resolved surface measurements, is able to retrieve the rational temporal evolution of the flow physics in the entire 2-D measurement area. The quality of the spectral measurements is confirmed by the results from both the linear and quadratic dynamical systems. The preliminary results from the linear ROM strengthens the motivation for future control implementation of a linear Kalman filter in this flow.

Effect of Ovule Position within the Pod on the Probability of Seed Production in Bauhinia ungulata (Fabaceae)

PubMed Central

MENA-ALÍ, JORGE I.; ROCHA, OSCAR J.

2004-01-01

• Background and Aims It has been claimed that ovules linearly ordered within a fruit differ in their probabilities of reaching maturity. This was investigated by studying the effect the position of an ovule within the pod has on seed abortion and seed production in Bauhinia ungulata. • Methods Fruits collected during the dry seasons of 1999, 2000 and 2001 were opened, and the number, position and status of each ovule within the fruit were recorded. A GLM model was used to assess the effects of population, tree identity and ovule position within the pod on ovule fertilization, seed abortion, seed damage and seed maturation in two populations of B. ungulata. • Key Results Nearly 30 % of the ovules were not fertilized in 1999; this percentage dropped to 5 % the following two years. Seed abortion (50 %) and seed damage (15 %) were the same every year during the study period. Only 15 % of the initial ovules developed into mature seeds in 1999; this value increased to 35 % in 2000 and 2001. However, seed survivorship was dependent on the position of the ovule within the pod; non-fertilized and early aborted ovules were found more often near the basal end of the ovary. The frequency of seed damage was not affected by position. Mature seeds were found mainly in the stylar half of fruits, where ovules are likely to be fertilized by fast pollen tubes. • Conclusions The pattern of seed production in B. ungulata is non-random but is dependent upon the position of the ovule within the pod. The results suggest that the seeds produced within a fruit might differ in their vigour. PMID:15596452

On a framework for generating PoD curves assisted by numerical simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Subair, S. Mohamed, E-mail: prajagopal@iitm.ac.in; Agrawal, Shweta, E-mail: prajagopal@iitm.ac.in; Balasubramaniam, Krishnan, E-mail: prajagopal@iitm.ac.in

2015-03-31

The Probability of Detection (PoD) curve method has emerged as an important tool for the assessment of the performance of NDE techniques, a topic of particular interest to the nuclear industry where inspection qualification is very important. The conventional experimental means of generating PoD curves though, can be expensive, requiring large data sets (covering defects and test conditions), and equipment and operator time. Several methods of achieving faster estimates for PoD curves using physics-based modelling have been developed to address this problem. Numerical modelling techniques are also attractive, especially given the ever-increasing computational power available to scientists today. Here wemore » develop procedures for obtaining PoD curves, assisted by numerical simulation and based on Bayesian statistics. Numerical simulations are performed using Finite Element analysis for factors that are assumed to be independent, random and normally distributed. PoD curves so generated are compared with experiments on austenitic stainless steel (SS) plates with artificially created notches. We examine issues affecting the PoD curve generation process including codes, standards, distribution of defect parameters and the choice of the noise threshold. We also study the assumption of normal distribution for signal response parameters and consider strategies for dealing with data that may be more complex or sparse to justify this. These topics are addressed and illustrated through the example case of generation of PoD curves for pulse-echo ultrasonic inspection of vertical surface-breaking cracks in SS plates.« less

On a framework for generating PoD curves assisted by numerical simulations

NASA Astrophysics Data System (ADS)

Subair, S. Mohamed; Agrawal, Shweta; Balasubramaniam, Krishnan; Rajagopal, Prabhu; Kumar, Anish; Rao, Purnachandra B.; Tamanna, Jayakumar

2015-03-01

The Probability of Detection (PoD) curve method has emerged as an important tool for the assessment of the performance of NDE techniques, a topic of particular interest to the nuclear industry where inspection qualification is very important. The conventional experimental means of generating PoD curves though, can be expensive, requiring large data sets (covering defects and test conditions), and equipment and operator time. Several methods of achieving faster estimates for PoD curves using physics-based modelling have been developed to address this problem. Numerical modelling techniques are also attractive, especially given the ever-increasing computational power available to scientists today. Here we develop procedures for obtaining PoD curves, assisted by numerical simulation and based on Bayesian statistics. Numerical simulations are performed using Finite Element analysis for factors that are assumed to be independent, random and normally distributed. PoD curves so generated are compared with experiments on austenitic stainless steel (SS) plates with artificially created notches. We examine issues affecting the PoD curve generation process including codes, standards, distribution of defect parameters and the choice of the noise threshold. We also study the assumption of normal distribution for signal response parameters and consider strategies for dealing with data that may be more complex or sparse to justify this. These topics are addressed and illustrated through the example case of generation of PoD curves for pulse-echo ultrasonic inspection of vertical surface-breaking cracks in SS plates.

DORIS-based point mascons for the long term stability of precise orbit solutions

NASA Astrophysics Data System (ADS)

Cerri, L.; Lemoine, J. M.; Mercier, F.; Zelensky, N. P.; Lemoine, F. G.

2013-08-01

In recent years non-tidal Time Varying Gravity (TVG) has emerged as the most important contributor in the error budget of Precision Orbit Determination (POD) solutions for altimeter satellites' orbits. The Gravity Recovery And Climate Experiment (GRACE) mission has provided POD analysts with static and time-varying gravity models that are very accurate over the 2002-2012 time interval, but whose linear rates cannot be safely extrapolated before and after the GRACE lifespan. One such model based on a combination of data from GRACE and Lageos from 2002-2010, is used in the dynamic POD solutions developed for the Geophysical Data Records (GDRs) of the Jason series of altimeter missions and the equivalent products from lower altitude missions such as Envisat, Cryosat-2, and HY-2A. In order to accommodate long-term time-variable gravity variations not included in the background geopotential model, we assess the feasibility of using DORIS data to observe local mass variations using point mascons. In particular, we show that the point-mascon approach can stabilize the geographically correlated orbit errors which are of fundamental interest for the analysis of regional Mean Sea Level trends based on altimeter data, and can therefore provide an interim solution in the event of GRACE data loss. The time series of point-mass solutions for Greenland and Antarctica show good agreement with independent series derived from GRACE data, indicating a mass loss at rate of 210 Gt/year and 110 Gt/year respectively.

A model "go-kit" for use at Strategic National Stockpile Points of Dispensing.

PubMed

May, Larissa; Cote, Timothy; Hardeman, Bernard; Gonzalez, Gabriela R; Adams, Sherry B; Blair, Roderick K; Pane, Gregg

2007-01-01

The Strategic National Stockpile (SNS) is a national repository of pharmaceuticals and other medical supplies forseeably needed during a medical disaster. In the event of SNS deployment, state and local public health authorities must be prepared to receive, distribute, and dispense the materials. We propose a cache of supplies, termed the "POD go-kit," prepared in advance and locally available prior to the establishment of Points of Dispensing (POD) for SNS material. Characteristics of the preassembled go-kit are its multiplicity of use, ease of storage and transportation, minimal redundancy with SNS material, and packaging in a manner consistent with POD function. The POD go-kit is assembled into 4 separate "subkits": administrative supplies, patient routing supplies, dispensing supplies, and POD staff protection supplies. Incorporating existing practices from the SNS Listserv, this article itemizes the contents of the POD go-kit and its subkits and provides a rationale for its packaging. The Division of Strategic National Stockpile (DSNS) has not certified the proposed "POD go-kit" as a standardized POD go-kit.

Ozone exposure- and flux-based response relationships with photosynthesis of winter wheat under fully open air condition.

PubMed

Feng, Zhaozhong; Calatayud, Vicent; Zhu, Jianguo; Kobayashi, Kazuhiko

2018-04-01

Five winter wheat cultivars were exposed to ambient (A-O 3 ) and elevated (E-O 3 , 1.5 ambient) O 3 in a fully open-air fumigation system in China. Ozone exposure- and flux based response relationships were established for seven physiological variables related to photosynthesis. The performance of the fitting of the regressions in terms of R 2 increased when second order regressions instead of first order ones were used, suggesting that effects of O 3 were more pronounced towards the last developmental stages of the wheat. The more robust indicators were those related with CO 2 assimilation, Rubisco activity and RuBP regeneration capacity (A sat , J max and Vc max ), and chlorophyll content (Chl). Flux-based metrics (POD y , Phytotoxic O 3 Dose over a threshold ynmolO 3 m -2 s -1 ) predicted slightly better the responses to O 3 than exposure metrics (AOTX, Accumulated O 3 exposure over an hourly Threshold of X ppb) for most of the variables. The best performance was observed for metrics POD 1 ( A sat , J max and Vc max ) and POD 3 (Chl). For this crop, the proposed response functions could be used for O 3 risk assessment based on physiological effects and also to include the influence of O 3 on yield or other variables in models with a photosynthetic component. Copyright © 2017 Elsevier B.V. All rights reserved.

Experimental design for estimating unknown groundwater pumping using genetic algorithm and reduced order model

NASA Astrophysics Data System (ADS)

Ushijima, Timothy T.; Yeh, William W.-G.

2013-10-01

An optimal experimental design algorithm is developed to select locations for a network of observation wells that provide maximum information about unknown groundwater pumping in a confined, anisotropic aquifer. The design uses a maximal information criterion that chooses, among competing designs, the design that maximizes the sum of squared sensitivities while conforming to specified design constraints. The formulated optimization problem is non-convex and contains integer variables necessitating a combinatorial search. Given a realistic large-scale model, the size of the combinatorial search required can make the problem difficult, if not impossible, to solve using traditional mathematical programming techniques. Genetic algorithms (GAs) can be used to perform the global search; however, because a GA requires a large number of calls to a groundwater model, the formulated optimization problem still may be infeasible to solve. As a result, proper orthogonal decomposition (POD) is applied to the groundwater model to reduce its dimensionality. Then, the information matrix in the full model space can be searched without solving the full model. Results from a small-scale test case show identical optimal solutions among the GA, integer programming, and exhaustive search methods. This demonstrates the GA's ability to determine the optimal solution. In addition, the results show that a GA with POD model reduction is several orders of magnitude faster in finding the optimal solution than a GA using the full model. The proposed experimental design algorithm is applied to a realistic, two-dimensional, large-scale groundwater problem. The GA converged to a solution for this large-scale problem.

Hypersonic shock tunnel heat transfer tests of the Space Shuttle SILTS pod configuration

NASA Technical Reports Server (NTRS)

Wittliff, C. E.

1983-01-01

Heat transfer measurements have been made on a 0.0175-scale NASA Space Shuttle orbiter model having a simulated SILTS (Shuttle Infrared Leeside Temperature Sensor) pod on top of the vertical tail. Heat transfer distributions were measured both on the pod and on the vertical tail. The test program covered Mach numbers of 8, 11 and 16 in air, at Reynolds numbers from 100,000 to 18 million, based on model length. The angle of attack ranged from 30 deg to 40 deg at sideslip angles from -2 to +2 deg. Data were obtained with 92 thin film assistance thermometers located on the SILTS pod and on the upper 30 percent of the vertical tail. Heat transfer rates measured on the vertical tail show good agreement with flight data obtained from missions STS-1, -2 and -3. The variation of heat transfer to the pod with Reynolds number, Mach number and angle of attack is discussed.

An Equation-Free Reduced-Order Modeling Approach to Tropical Pacific Simulation

NASA Astrophysics Data System (ADS)

Wang, Ruiwen; Zhu, Jiang; Luo, Zhendong; Navon, I. M.

2009-03-01

The “equation-free” (EF) method is often used in complex, multi-scale problems. In such cases it is necessary to know the closed form of the required evolution equations about oscopic variables within some applied fields. Conceptually such equations exist, however, they are not available in closed form. The EF method can bypass this difficulty. This method can obtain oscopic information by implementing models at a microscopic level. Given an initial oscopic variable, through lifting we can obtain the associated microscopic variable, which may be evolved using Direct Numerical Simulations (DNS) and by restriction, we can obtain the necessary oscopic information and the projective integration to obtain the desired quantities. In this paper we apply the EF POD-assisted method to the reduced modeling of a large-scale upper ocean circulation in the tropical Pacific domain. The computation cost is reduced dramatically. Compared with the POD method, the method provided more accurate results and it did not require the availability of any explicit equations or the right-hand side (RHS) of the evolution equation.

Wall Shear Stress Distribution in a Patient-Specific Cerebral Aneurysm Model using Reduced Order Modeling

NASA Astrophysics Data System (ADS)

Han, Suyue; Chang, Gary Han; Schirmer, Clemens; Modarres-Sadeghi, Yahya

2016-11-01

We construct a reduced-order model (ROM) to study the Wall Shear Stress (WSS) distributions in image-based patient-specific aneurysms models. The magnitude of WSS has been shown to be a critical factor in growth and rupture of human aneurysms. We start the process by running a training case using Computational Fluid Dynamics (CFD) simulation with time-varying flow parameters, such that these parameters cover the range of parameters of interest. The method of snapshot Proper Orthogonal Decomposition (POD) is utilized to construct the reduced-order bases using the training CFD simulation. The resulting ROM enables us to study the flow patterns and the WSS distributions over a range of system parameters computationally very efficiently with a relatively small number of modes. This enables comprehensive analysis of the model system across a range of physiological conditions without the need to re-compute the simulation for small changes in the system parameters.

A comparison of Probability Of Detection (POD) data determined using different statistical methods

NASA Astrophysics Data System (ADS)

Fahr, A.; Forsyth, D.; Bullock, M.

1993-12-01

Different statistical methods have been suggested for determining probability of detection (POD) data for nondestructive inspection (NDI) techniques. A comparative assessment of various methods of determining POD was conducted using results of three NDI methods obtained by inspecting actual aircraft engine compressor disks which contained service induced cracks. The study found that the POD and 95 percent confidence curves as a function of crack size as well as the 90/95 percent crack length vary depending on the statistical method used and the type of data. The distribution function as well as the parameter estimation procedure used for determining POD and the confidence bound must be included when referencing information such as the 90/95 percent crack length. The POD curves and confidence bounds determined using the range interval method are very dependent on information that is not from the inspection data. The maximum likelihood estimators (MLE) method does not require such information and the POD results are more reasonable. The log-logistic function appears to model POD of hit/miss data relatively well and is easy to implement. The log-normal distribution using MLE provides more realistic POD results and is the preferred method. Although it is more complicated and slower to calculate, it can be implemented on a common spreadsheet program.

Effects of a Fibrin Sealant on Skin Graft Tissue Adhesion in a Rodent Model.

PubMed

Balceniuk, Mark D; Wingate, Nicholas A; Krein, Howard; Curry, Joseph; Cognetti, David; Heffelfiner, Ryan; Luginbuhl, Adam

2016-07-01

To establish a rodent model for skin grafting with fibrin glue and examine the effects of fibrin glue on the adhesive strength of skin grafts without bolsters. Animal cohort. Academic hospital laboratory. Three skin grafts were created using a pneumatic microtome on the dorsum of 12 rats. Rats were evenly divided into experimental (n = 6) and control (n = 6) groups. The experimental group received a thin layer of fibrin glue between the graft and wound bed, and the control group was secured with standard bolsters. Adherence strength of the skin graft was tested by measurement of force required to sheer the graft from the recipient wound. Adhesion strength measurements were taken on postoperative days (PODs) 1, 2, and 3. The experimental group required an average force of 719 g on POD1, 895 g on POD2, and 676 g on POD3, while the average force in the control group was 161 g on POD1, 257 g on POD2, and 267 g on POD3. On each of the 3 PODs, there was a significant difference in adherence strength between the experimental and control groups (P = .036, P = .029, P = .024). There is a significant difference in the adhesion strength of skin grafts to the wound bed in the early postoperative period of the 2 groups. In areas of high mobility, using the fibrin sealant can keep the graft immobile during the critical phases of early healing. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

Coherent resonance stop bands in alternating gradient beam transport

NASA Astrophysics Data System (ADS)

Ito, K.; Okamoto, H.; Tokashiki, Y.; Fukushima, K.

2017-06-01

An extensive experimental study is performed to confirm fundamental resonance bands of an intense hadron beam propagating through an alternating gradient linear transport channel. The present work focuses on the most common lattice geometry called "FODO" or "doublet" that consists of two quadrupoles of opposite polarities. The tabletop ion-trap system "S-POD" (Simulator of Particle Orbit Dynamics) developed at Hiroshima University is employed to clarify the parameter-dependence of coherent beam instability. S-POD can provide a non-neutral plasma physically equivalent to a charged-particle beam in a periodic focusing potential. In contrast with conventional experimental approaches relying on large-scale machines, it is straightforward in S-POD to control the doublet geometry characterized by the quadrupole filling factor and drift-space ratio. We verify that the resonance feature does not essentially change depending on these geometric factors. A few clear stop bands of low-order resonances always appear in the same pattern as previously found with the sinusoidal focusing model. All stop bands become widened and shift to the higher-tune side as the beam density is increased. In the space-charge-dominated regime, the most dangerous stop band is located at the bare betatron phase advance slightly above 90 degrees. Experimental data from S-POD suggest that this severe resonance is driven mainly by the linear self-field potential rather than by nonlinear external imperfections and, therefore, unavoidable at high beam density. The instability of the third-order coherent mode generates relatively weak but noticeable stop bands near the phase advances of 60 and 120 degrees. The latter sextupole stop band is considerably enhanced by lattice imperfections. In a strongly asymmetric focusing channel, extra attention may have to be paid to some coupling resonance lines induced by the Coulomb potential. Our interpretations of experimental data are supported by theoretical predictions and systematic multiparticle simulations.

Teaching Students with Developmental Disabilities to Operate an iPod Touch[R] to Listen to Music

ERIC Educational Resources Information Center

Kagohara, Debora M.; Sigafoos, Jeff; Achmadi, Donna; van der Meer, Larah; O'Reilly, Mark F.; Lancioni, Giulio E.

2011-01-01

We evaluated an intervention procedure for teaching three students with developmental disabilities to independently operate a portable multimedia device (i.e., an iPod Touch[R]) to listen to music. The intervention procedure included the use of video modeling, which was presented on the same iPod Touch[R] that the students were taught to operate…

Effect of Tara (Caesalpinia spinosa) Pod Powder on the Oxidation and Colour Stability of Pork Meat Batter During Chilled Storage

PubMed Central

Skowyra, Monika; Janiewicz, Urszula; Salejda, Anna Marietta; Krasnowska, Grażyna

2015-01-01

Summary The effect of dried pods of Caesalpinia spinosa, known as tara, on pH, cooking loss, lipid oxidation, colour stability and texture of model meat systems stored at 4 °C for 21 days was investigated. Tara pod powder showing a potential antioxidant activity was added at 0.02, 0.04 and 0.08% (by mass) directly to the pork batter and compared with a synthetic antioxidant, butylated hydroxyanisole (BHA) and control (no added antioxidants). The addition of tara pod powder at 0.02% was as effective as BHA (0.02%) in retarding lipid oxidation in pork products during storage. Results showed that redness increased after the addition of tara pod powder. Specifically, 0.02% of tara pod powder was effective in keeping the red colour of meat batter stored under illumination at 4 °C for 48 h. Hardness of pork products was the lowest in samples manufactured with tara pod powder compared with control. Results highlight the potential of using tara pod powder as natural functional ingredient in the development of pork products with enhanced quality and shelf life. PMID:27904376

POD evaluation using simulation: A phased array UT case on a complex geometry part

NASA Astrophysics Data System (ADS)

Dominguez, Nicolas; Reverdy, Frederic; Jenson, Frederic

2014-02-01

The use of Probability of Detection (POD) for NDT performances demonstration is a key link in products lifecycle management. The POD approach is to apply the given NDT procedure on a series of known flaws to estimate the probability to detect with respect to the flaw size. A POD is relevant if and only if NDT operations are carried out within the range of variability authorized by the procedure. Such experimental campaigns require collection of large enough datasets to cover the range of variability with sufficient occurrences to build a reliable POD statistics, leading to expensive costs to get POD curves. In the last decade research activities have been led in the USA with the MAPOD group and later in Europe with the SISTAE and PICASSO projects based on the idea to use models and simulation tools to feed POD estimations. This paper proposes an example of application of POD using simulation on the inspection procedure of a complex -full 3D- geometry part using phased arrays ultrasonic testing. It illustrates the methodology and the associated tools developed in the CIVA software. The paper finally provides elements of further progress in the domain.

Increased collagen maturity with sildenafil citrate: experimental high risk colonic anastomosis model.

PubMed

Cakir, Tebessum; Ozer, Ilter; Bostanci, Erdal Birol; Keklik, Tulay Timucin; Ercin, Ugur; Bilgihan, Ayse; Akoglu, Musa

2015-01-01

Inadequate healing and high anastomosis leak rates at rectal anastomosis may be due to lack of supportive serosal layer and technical difficulty of low anterior resections. Positive effects of sildenafil on wound healing were observed. The aim of this study was to simulate rectal anastomosis as a technical insufficient anastomosis and investigate the effects of sildenafil on anastomosis healing. Colonic anastomoses were carried out in 64 rats and randomized into four groups, CA-S, complete anastomoses without sildenafil (10 mg/kg for 5 days); CA+S, complete anastomoses with sildenafil; IA-S, incomplete anastomoses without sildenafil; IA+S, incomplete anastomoses with sildenafil. Half of the rats in every group were sacrificed on post-operative day (POD) 3, half of them sacrificed on POD 7. Tissues from the anastomoses were used for functional, histochemical, biochemical investigations. Sildenafil treatment resulted in increased bursting pressures in IA+S on POD 7 (p=0.010). Collagen maturity was higher in IA+S on POD 3 and POD 7, CA+S on POD 7 (p=0.010; p=0.010; p<0.007). Collagen content was higher in IA+S on POD 7 (p<0.001). Glutathione, hydroxyproline levels were similar. Malondialdehyde levels were lower in IA+S on POD 3 (p<0.001). Epithelization score was higher in IA+S on POD 7 (p=0.007). Inflammation score was higher in CA-S group on POD 3 and POD 7 (p<0.001; p<0.001). Neutrophil score was lower in CA+S on POD 3 (p=0.005). An increase in collagen content, maturity, and epithelization, a decrease in neutrophil infiltration, oxidative stress and better mechanical strength were observed with the administration of sildenafil. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Comparison of Laser Doppler and Laser-Assisted Indocyanine Green Angiography Prediction of Flap Survival in a Novel Modification of the McFarlane Flap.

PubMed

Fourman, Mitchell Stephen; Gersch, Robert P; Phillips, Brett T; Nasser, Ahmed; Rivara, Andrew; Verma, Richa; Dagum, Alexander B; Rosengart, Todd K; Bui, Duc T

2015-07-01

The McFarlane rat ischemic dorsal skin flap model has been commonly used for clinical vector studies, as well as the testing of noninvasive diagnostics. However, variability of this model secondary to flap contact with the wound bed has led many to question its validity. Here we present a novel modification to the McFarlane skin flap using sterile silicone. We also use this model to test the prognostic efficacy of laser-assisted indocyanine green (ICG) angiography and laser Doppler imaging (LDI). A 3 × 9-cm dorsal skin flap with a cranially based pedicle was created, centered 1 cm distal to the scapulae. The flap was undermined, and in one of the 2 groups, a sterile silicone sheet was placed onto the wound bed. All flaps were then reapproximated with sutures 1-cm intervals. Clinical assessment and perfusion imaging was performed immediately postoperative, and at 24, 48, and 72 hours postsurgery. Postoperative day 7 clinical assessment was obtained before euthanasia. A comparative study using silicone blocked versus unblocked models (n = 6 per group) showed that, clinically, both models had equivalent flap survival [8.5 (0.913) vs 9.5 (1.01) cm]. However, a statistically significant increase in perfusion in the mid-third of unblocked models was observed on POD3 [20.28% (2.7%) vs blocked 13.45% (2.5%), P < 0.05], with a similar increase in the distal third on POD7 [18.73% (2.064%) vs 10.91% (4.19%), P < 0.05]. A prognostic study comparing LDI and ICG angiography prediction of POD7 survival at early time points (n = 10) found that LDI underpredicted flap survival at early time points [84.2% (12.03%) on POD0, 87.35% (16.11%) on POD1]. In contrast, ICG was more proficient [100.1% (10.1%) on POD0]. We present a modification of the McFarlane skin flap model that results in similar clinical results, but with a noted reduction in perfusion inconsistencies noted in unblocked models. The ICG angiography is superior to LDI in predicting POD7 flap necrosis within the first 48 hours postinjury. Future work will focus on histologic validation of our model, and vector efficacy testing.

Impact of Genomics Platform and Statistical Filtering on Transcriptional Benchmark Doses (BMD) and Multiple Approaches for Selection of Chemical Point of Departure (PoD)

PubMed Central

Webster, A. Francina; Chepelev, Nikolai; Gagné, Rémi; Kuo, Byron; Recio, Leslie; Williams, Andrew; Yauk, Carole L.

2015-01-01

Many regulatory agencies are exploring ways to integrate toxicogenomic data into their chemical risk assessments. The major challenge lies in determining how to distill the complex data produced by high-content, multi-dose gene expression studies into quantitative information. It has been proposed that benchmark dose (BMD) values derived from toxicogenomics data be used as point of departure (PoD) values in chemical risk assessments. However, there is limited information regarding which genomics platforms are most suitable and how to select appropriate PoD values. In this study, we compared BMD values modeled from RNA sequencing-, microarray-, and qPCR-derived gene expression data from a single study, and explored multiple approaches for selecting a single PoD from these data. The strategies evaluated include several that do not require prior mechanistic knowledge of the compound for selection of the PoD, thus providing approaches for assessing data-poor chemicals. We used RNA extracted from the livers of female mice exposed to non-carcinogenic (0, 2 mg/kg/day, mkd) and carcinogenic (4, 8 mkd) doses of furan for 21 days. We show that transcriptional BMD values were consistent across technologies and highly predictive of the two-year cancer bioassay-based PoD. We also demonstrate that filtering data based on statistically significant changes in gene expression prior to BMD modeling creates more conservative BMD values. Taken together, this case study on mice exposed to furan demonstrates that high-content toxicogenomics studies produce robust data for BMD modelling that are minimally affected by inter-technology variability and highly predictive of cancer-based PoD doses. PMID:26313361

Zearalenone reduction by commercial peroxidase enzyme and peroxidases from soybean bran and rice bran.

PubMed

Garcia, Sabrina O; Feltrin, Ana Carla P; Garda-Buffon, Jaqueline

2018-06-11

The peroxidase (POD) enzyme, obtained from different sources, has been described in the literature regarding its good results of reduction in concentration or degradation levels of mycotoxins, such as aflatoxin B1, deoxynivalenol and zearalenone. This study aimed at evaluating the action of commercial peroxidase and peroxidase from soybean bran (SB) and rice bran (RB) in zearalenone (ZEA) reduction in a model solution and the characterization of the mechanism of enzyme action. POD was extracted from SB and RB in phosphate buffer by orbital agitation. Evaluation of the action of commercial POD and POD from SB and RB in ZEA reduction was carried out in phosphate buffer and aqueous solution, respectively. Parameters of K M and V max were determined in the concentration range from 0.16 to 6 µg mL -1 . ZEA reduction was determined and the mechanism of enzyme action was characterized by Fourier transform infrared spectroscopy and high-pressure liquid chromatography-electrospray tandem mass spectrometry. Commercial POD and POD from RB and SB reduced ZEA concentration by 69.9, 47.4 and 30.6% in 24 h, respectively. K M values were 39.61 and 8.90 µM whereas V max values were 0.170 and 0.011 µM min -1 for commercial POD and POD from RB, respectively. The characterization of the mechanism of enzyme action showed the oxidoreductive action of commercial POD in the mycotoxin. The use of commercial POD and POD from agro-industrial by-products, such as SB and RB, could be a promising alternative for ZEA biodegradation.

Decreasing the temporal complexity for nonlinear, implicit reduced-order models by forecasting

DOE PAGES

Carlberg, Kevin; Ray, Jaideep; van Bloemen Waanders, Bart

2015-02-14

Implicit numerical integration of nonlinear ODEs requires solving a system of nonlinear algebraic equations at each time step. Each of these systems is often solved by a Newton-like method, which incurs a sequence of linear-system solves. Most model-reduction techniques for nonlinear ODEs exploit knowledge of system's spatial behavior to reduce the computational complexity of each linear-system solve. However, the number of linear-system solves for the reduced-order simulation often remains roughly the same as that for the full-order simulation. We propose exploiting knowledge of the model's temporal behavior to (1) forecast the unknown variable of the reduced-order system of nonlinear equationsmore » at future time steps, and (2) use this forecast as an initial guess for the Newton-like solver during the reduced-order-model simulation. To compute the forecast, we propose using the Gappy POD technique. As a result, the goal is to generate an accurate initial guess so that the Newton solver requires many fewer iterations to converge, thereby decreasing the number of linear-system solves in the reduced-order-model simulation.« less

DO3SE model applicability and O3 flux performance compared to AOT40 for an O3-sensitive tropical tree species (Psidium guajava L. 'Paluma').

PubMed

Assis, Pedro I L S; Alonso, Rocío; Meirelles, Sérgio T; Moraes, Regina M

2015-07-01

Phytotoxic ozone (O3) levels have been recorded in the Metropolitan Region of São Paulo (MRSP). Flux-based critical levels for O3 through stomata have been adopted for some northern hemisphere species, showing better accuracy than with accumulated ozone exposure above a threshold of 40 ppb (AOT40). In Brazil, critical levels for vegetation protection against O3 adverse effects do not exist. The study aimed to investigate the applicability of O3 deposition model (Deposition of Ozone for Stomatal Exchange (DO3SE)) to an O3-sensitive tropical tree species (Psidium guajava L. 'Paluma') under the MRSP environmental conditions, which are very unstable, and to assess the performance of O3 flux and AOT40 in relation to O3-induced leaf injuries. Stomatal conductance (g s) parameterization for 'Paluma' was carried out and used to calculate different rate thresholds (from 0 to 5 nmol O3 m(-2) projected leaf area (PLA) s(-1)) for the phytotoxic ozone dose (POD). The model performance was assessed through the relationship between the measured and modeled g sto. Leaf injuries were analyzed and associated with POD and AOT40. The model performance was satisfactory and significant (R (2) = 0.56; P < 0.0001; root-mean-square error (RMSE) = 116). As already expected, high AOT40 values did not result in high POD values. Although high POD values do not always account for more injuries, POD0 showed better performance than did AOT40 and other different rate thresholds for POD. Further investigation is necessary to improve our model and also to check if there is a critical level of ozone in which leaf injuries arise. The conclusion is that the DO3SE model for 'Paluma' is applicable in the MRSP as well as in temperate regions and may contribute to future directives.

Assessment of molecular contamination in mask pod

NASA Astrophysics Data System (ADS)

Foray, Jean Marie; Dejaune, Patrice; Sergent, Pierre; Gough, Stuart; Cheung, D.; Davenet, Magali; Favre, Arnaud; Rude, C.; Trautmann, T.; Tissier, Michel; Fontaine, H.; Veillerot, M.; Avary, K.; Hollein, I.; Lerit, R.

2008-04-01

Context/ study Motivation: Contamination and especially Airbone Molecular Contamination (AMC) is a critical issue for mask material flow with a severe and fairly unpredictable risk of induced contamination and damages especially for 193 nm lithography. It is therefore essential to measure, to understand and then try to reduce AMC in mask environment. Mask material flow was studied in a global approach by a pool of European partners, especially within the frame of European MEDEA+ project, so called "MUSCLE". This paper deals with results and assessment of mask pod environment in term of molecular contamination in a first step, then in a second step preliminary studies to reduce mask pod influence and contamination due to material out gassing. Approach and techniques: A specific assessment of environmental / molecular contamination along the supply chain was performed by all partners. After previous work presented at EMLC 07, further studies were performed on real time contamination measurement pod at different sites locations (including Mask manufacturing site, blank manufacturing sites, IC fab). Studies were linked to the main critical issues: cleaning, storage, handling, materials and processes. Contamination measurement campaigns were carried out along the mask supply chain using specific Adixen analyzer in order to monitor in real time organic contaminants (ppb level) in mask pods. Key results would be presented: VOC, AMC and humidity level on different kinds of mask carriers, impact of basic cleaning on pod outgassing measurement (VOC, NH3), and process influence on pod contamination... In a second step, preliminary specific pod conditioning studies for better pod environment were performed based on Adixen vacuum process. Process influence had been experimentally measured in term of molecular outgassing from mask pods. Different AMC experimental characterization methods had been carried out leading to results on a wide range of organic and inorganic contaminants: by inline techniques based on Adixen humidity, also VOC and organic sensors, together by off-line techniques already used in the extensive previous mask pods benchmark (TD-GCMS & Ionic Chromatography). Humidity and VOC levels from mask carriers had shown significant reduction after Adixen pod conditioning process. Focus had been made on optimized vacuum step (for AMC) after particles carrier cleaning cycle. Based upon these key results new procedures, as well as guidelines for mask carrier cleaning optimization are proposed to improve pod contamination control. Summary results/next steps: This paper reports molecular contamination measurement campaigns performed by a pool of European partners along the mask supply chain. It allows us to investigate, identify and quantify critical molecular contamination in mask pod, as well as VOC and humidity, issues depending on locations, uses, and carrier's type. Preliminary studies highlight initial process solutions for pods conditioning that are being used for short term industrialization and further industrialized.

Implementation of a low-cost, commercial orbit determination system

NASA Technical Reports Server (NTRS)

Corrigan, Jim

1994-01-01

This paper describes the implementation and potential applications of a workstation-based orbit determination system developed by Storm Integration, Inc. called the Precision Orbit Determination System (PODS). PODS is offered as a layered product to the commercially-available Satellite Tool Kit (STK) produced by Analytical Graphics, Inc. PODS also incorporates the Workstation/Precision Orbit Determination (WS/POD) product offered by Van Martin System, Inc. The STK graphical user interface is used to access and invoke the PODS capabilities and to display the results. WS/POD is used to compute a best-fit solution to user-supplied tracking data. PODS provides the capability to simultaneously estimate the orbits of up to 99 satellites based on a wide variety of observation types including angles, range, range rate, and Global Positioning System (GPS) data. PODS can also estimate ground facility locations, Earth geopotential model coefficients, solar pressure and atmospheric drag parameters, and observation data biases. All determined data is automatically incorporated into the STK data base, which allows storage, manipulation and export of the data to other applications. PODS is offered in three levels: Standard, Basic GPS and Extended GPS. Standard allows processing of non-GPS observation types for any number of vehicles and facilities. Basic GPS adds processing of GPS pseudo-ranging data to the Standard capabilities. Extended GPS adds the ability to process GPS carrier phase data.

Effects of multiple levels of social organization on survival and abundance.

PubMed

Ward, Eric J; Semmens, Brice X; Holmes, Elizabeth E; Balcomb Iii, Ken C

2011-04-01

Identifying how social organization shapes individual behavior, survival, and fecundity of animals that live in groups can inform conservation efforts and improve forecasts of population abundance, even when the mechanism responsible for group-level differences is unknown. We constructed a hierarchical Bayesian model to quantify the relative variability in survival rates among different levels of social organization (matrilines and pods) of an endangered population of killer whales (Orcinus orca). Individual killer whales often participate in group activities such as prey sharing and cooperative hunting. The estimated age-specific survival probabilities and survivorship curves differed considerably among pods and to a lesser extent among matrilines (within pods). Across all pods, males had lower life expectancy than females. Differences in survival between pods may be caused by a combination of factors that vary across the population's range, including reduced prey availability, contaminants in prey, and human activity. Our modeling approach could be applied to demographic rates for other species and for parameters other than survival, including reproduction, prey selection, movement, and detection probabilities. Conservation Biology ©2010 Society for Conservation Biology. No claim to original US government works.

Operational evaluation of high-throughput community-based mass prophylaxis using Just-in-time training.

PubMed

Spitzer, James D; Hupert, Nathaniel; Duckart, Jonathan; Xiong, Wei

2007-01-01

Community-based mass prophylaxis is a core public health operational competency, but staffing needs may overwhelm the local trained health workforce. Just-in-time (JIT) training of emergency staff and computer modeling of workforce requirements represent two complementary approaches to address this logistical problem. Multnomah County, Oregon, conducted a high-throughput point of dispensing (POD) exercise to test JIT training and computer modeling to validate POD staffing estimates. The POD had 84% non-health-care worker staff and processed 500 patients per hour. Post-exercise modeling replicated observed staff utilization levels and queue formation, including development and amelioration of a large medical evaluation queue caused by lengthy processing times and understaffing in the first half-hour of the exercise. The exercise confirmed the feasibility of using JIT training for high-throughput antibiotic dispensing clinics staffed largely by nonmedical professionals. Patient processing times varied over the course of the exercise, with important implications for both staff reallocation and future POD modeling efforts. Overall underutilization of staff revealed the opportunity for greater efficiencies and even higher future throughputs.

Reduced order modeling, statistical analysis and system identification for a bladed rotor with geometric mistuning

NASA Astrophysics Data System (ADS)

Vishwakarma, Vinod

Modified Modal Domain Analysis (MMDA) is a novel method for the development of a reduced-order model (ROM) of a bladed rotor. This method utilizes proper orthogonal decomposition (POD) of Coordinate Measurement Machine (CMM) data of blades' geometries and sector analyses using ANSYS. For the first time ROM of a geometrically mistuned industrial scale rotor (Transonic rotor) with large size of Finite Element (FE) model is generated using MMDA. Two methods for estimating mass and stiffness mistuning matrices are used a) exact computation from sector FE analysis, b) estimates based on POD mistuning parameters. Modal characteristics such as mistuned natural frequencies, mode shapes and forced harmonic response are obtained from ROM for various cases, and results are compared with full rotor ANSYS analysis and other ROM methods such as Subset of Nominal Modes (SNM) and Fundamental Model of Mistuning (FMM). Accuracy of MMDA ROM is demonstrated with variations in number of POD features and geometric mistuning parameters. It is shown for the aforementioned case b) that the high accuracy of ROM studied in previous work with Academic rotor does not directly translate to the Transonic rotor. Reasons for such mismatch in results are investigated and attributed to higher mistuning in Transonic rotor. Alternate solutions such as estimation of sensitivities via least squares, and interpolation of mass and stiffness matrices on manifolds are developed, and their results are discussed. Statistics such as mean and standard deviations of forced harmonic response peak amplitude are obtained from random permutations, and are shown to have similar results as those of Monte Carlo simulations. These statistics are obtained and compared for 3 degree of freedom (DOF) lumped parameter model (LPM) of rotor, Academic rotor and Transonic rotor. A state -- estimator based on MMDA ROM and Kalman filter is also developed for offline or online estimation of harmonic forcing function from measurements of forced response. Forcing function is estimated for synchronous excitation of 3DOF rotor model, Academic rotor and Transonic rotor from measurement of response at few nodes. For asynchronous excitation forcing function is estimated only for 3DOF rotor model and Academic rotor from measurement of response. The impact of number of measurement locations and accuracy of ROM on the estimation of forcing function is discussed. iv.

A trust-region algorithm for the optimization of PSA processes using reduced-order modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, A.; Biegler, L.; Zitney, S.

2009-01-01

The last few decades have seen a considerable increase in the applications of adsorptive gas separation technologies, such as pressure swing adsorption (PSA); the applications range from bulk separations to trace contaminant removal. PSA processes are based on solid-gas equilibrium and operate under periodic transient conditions [1]. Bed models for these processes are therefore defined by coupled nonlinear partial differential and algebraic equations (PDAEs) distributed in space and time with periodic boundary conditions that connect the processing steps together and high nonlinearities arising from non-isothermal effects and nonlinear adsorption isotherms. As a result, the optimization of such systems for eithermore » design or operation represents a significant computational challenge to current nonlinear programming algorithms. Model reduction is a powerful methodology that permits systematic generation of cost-efficient low-order representations of large-scale systems that result from discretization of such PDAEs. In particular, low-dimensional approximations can be obtained from reduced order modeling (ROM) techniques based on proper orthogonal decomposition (POD) and can be used as surrogate models in the optimization problems. In this approach, a representative ensemble of solutions of the dynamic PDAE system is constructed by solving a higher-order discretization of the model using the method of lines, followed by the application of Karhunen-Loeve expansion to derive a small set of empirical eigenfunctions (POD modes). These modes are used as basis functions within a Galerkin's projection framework to derive a low-order DAE system that accurately describes the dominant dynamics of the PDAE system. This approach leads to a DAE system of significantly lower order, thus replacing the one obtained from spatial discretization before and making optimization problem computationally efficient [2]. The ROM methodology has been successfully applied to a 2-bed 4-step PSA process used for separating a hydrogen-methane mixture in [3]. The reduced order model developed was successfully used to optimize this process to maximize hydrogen recovery within a trust-region. We extend this approach in this work to develop a rigorous trust-region algorithm for ROM-based optimization of PSA processes. The trust-region update rules and sufficient decrease condition for the objective is used to determine the size of the trust-region. Based on the decrease in the objective function and error in the ROM, a ROM updation strategy is designed [4, 5]. The inequalities and bounds are handled in the algorithm using exact penalty formulation, and a non-smooth trust-region algorithm by Conn et al. [6] is used to handle non-differentiability. To ensure that the first order consistency condition is met and the optimum obtained from ROM-based optimization corresponds to the optimum of the original problem, a scaling function, such as one proposed by Alexandrov et al. [7], is incorporated in the objective function. Such error control mechanism is also capable of handling numerical inconsistencies such as unphysical oscillations in the state variable profiles. The proposed methodology is applied to optimize a PSA process to concentrate CO{sub 2} from a nitrogen-carbon dioxide mixture. As in [3], separate ROMs are developed for each operating step with different POD modes for each state variable. Numerical results will be presented for optimization case studies which involve maximizing CO{sub 2} recovery, feed throughput or minimizing overall power consumption.« less

Pod Mildew on Soybeans Can Mitigate the Damage to the Seed Arising from Field Mold at Harvest Time.

PubMed

Liu, Jiang; Deng, Juncai; Zhang, Ke; Wu, Haijun; Yang, Caiqiong; Zhang, Xiaowen; Du, Junbo; Shu, Kai; Yang, Wenyu

2016-12-07

Seedpods are the outermost barrier of legume plants encountered by pests and pathogens, but research on this tissue, especially regarding their chemical constituents, is limited. In the present study, a mildew-index-model-based cluster analysis was used to evaluate and identify groups of soybean genotypes with different organ-specific resistance against field mold. The constituents of soybean pods, including proteins, carbohydrates, fatty acids, and isoflavones, were analyzed. Linear regression and correlation analyses were also conducted between these main pod constituents and the organ-specific mildew indexes of seed (MIS) and pod (MIP). With increases in the contents of infection constituents, such as proteins, carbohydrates, and fatty acids, the MIP increased and the MIS decreased. The MIS decreased with increases in the contents of glycitein (GLE)-type isoflavonoids, which act as antibiotic constituents. Although the infection constituents in the soybean pods caused pod mildew, they also helped mitigate the corresponding seed mildew to a certain extent.

Boeing-747 aircraft with external cargo pod

NASA Technical Reports Server (NTRS)

Quartero, C. B.; Washburn, G. F.; Price, J. E.

1978-01-01

An analysis was conducted to investigate the feasibility of mounting a detachable pod to the underside of the fuselage of a Boeing Model 747 aircraft to carry outsized cargo in case of military emergency. The analysis showed that the 747 configured with the pod and carrying only a bridge launcher as payload attained a range of 8.70 Mm (4 700 n. mi.) at Mach .68. This range was based on a maximum take-off gross weight of 3.447 MN (775 000 1bf) which included 212 kN (47 700 lbf) pod weight and 543 kN (122 000 lbf) payload (bridge launcher).

Precise orbit determination and rapid orbit recovery supported by time synchronization

NASA Astrophysics Data System (ADS)

Guo, Rui; Zhou, JianHua; Hu, XiaoGong; Liu, Li; Tang, Bo; Li, XiaoJie; Wu, Shan

2015-06-01

In order to maintain optimal signal coverage, GNSS satellites have to experience orbital maneuvers. For China's COMPASS system, precise orbit determination (POD) as well as rapid orbit recovery after maneuvers contribute to the overall Positioning, Navigation and Timing (PNT) service performance in terms of accuracy and availability. However, strong statistical correlations between clock offsets and the radial component of a satellite's positions require long data arcs for POD to converge. We propose here a new strategy which relies on time synchronization between ground tracking stations and in-orbit satellites. By fixing satellite clock offsets measured by the satellite station two-way synchronization (SSTS) systems and receiver clock offsets, POD and orbital recovery performance can be improved significantly. Using the Satellite Laser Ranging (SLR) as orbital accuracy evaluation, we find the 4-hr recovered orbit achieves about 0.71 m residual root mean square (RMS) error of fit SLR data, the recovery time is improved from 24-hr to 4-hr compared with the conventional POD without time synchronization support. In addition, SLR evaluation shows that for 1-hr prediction, about 1.47 m accuracy is achieved with the new proposed POD strategy.

Geometry and Mechanics in the Opening of Chiral Seed Pods

NASA Astrophysics Data System (ADS)

Armon, Shahaf; Efrati, Efi; Kupferman, Raz; Sharon, Eran

2011-09-01

We studied the mechanical process of seed pods opening in Bauhinia variegate and found a chirality-creating mechanism, which turns an initially flat pod valve into a helix. We studied configurations of strips cut from pod valve tissue and from composite elastic materials that mimic its structure. The experiments reveal various helical configurations with sharp morphological transitions between them. Using the mathematical framework of “incompatible elasticity,” we modeled the pod as a thin strip with a flat intrinsic metric and a saddle-like intrinsic curvature. Our theoretical analysis quantitatively predicts all observed configurations, thus linking the pod’s microscopic structure and macroscopic conformation. We suggest that this type of incompatible strip is likely to play a role in the self-assembly of chiral macromolecules and could be used for the engineering of synthetic self-shaping devices.

Improved resistivity imaging of groundwater solute plumes using POD-based inversion

NASA Astrophysics Data System (ADS)

Oware, E. K.; Moysey, S. M.; Khan, T.

2012-12-01

We propose a new approach for enforcing physics-based regularization in electrical resistivity imaging (ERI) problems. The approach utilizes a basis-constrained inversion where an optimal set of basis vectors is extracted from training data by Proper Orthogonal Decomposition (POD). The key aspect of the approach is that Monte Carlo simulation of flow and transport is used to generate a training dataset, thereby intrinsically capturing the physics of the underlying flow and transport models in a non-parametric form. POD allows for these training data to be projected onto a subspace of the original domain, resulting in the extraction of a basis for the inversion that captures characteristics of the groundwater flow and transport system, while simultaneously allowing for dimensionality reduction of the original problem in the projected space We use two different synthetic transport scenarios in heterogeneous media to illustrate how the POD-based inversion compares with standard Tikhonov and coupled inversion. The first scenario had a single source zone leading to a unimodal solute plume (synthetic #1), whereas, the second scenario had two source zones that produced a bimodal plume (synthetic #2). For both coupled inversion and the POD approach, the conceptual flow and transport model used considered only a single source zone for both scenarios. Results were compared based on multiple metrics (concentration root-mean square error (RMSE), peak concentration, and total solute mass). In addition, results for POD inversion based on 3 different data densities (120, 300, and 560 data points) and varying number of selected basis images (100, 300, and 500) were compared. For synthetic #1, we found that all three methods provided qualitatively reasonable reproduction of the true plume. Quantitatively, the POD inversion performed best overall for each metric considered. Moreover, since synthetic #1 was consistent with the conceptual transport model, a small number of basis vectors (100) contained enough a priori information to constrain the inversion. Increasing the amount of data or number of selected basis images did not translate into significant improvement in imaging results. For synthetic #2, the RMSE and error in total mass were lowest for the POD inversion. However, the peak concentration was significantly overestimated by the POD approach. Regardless, the POD-based inversion was the only technique that could capture the bimodality of the plume in the reconstructed image, thus providing critical information that could be used to reconceptualize the transport problem. We also found that, in the case of synthetic #2, increasing the number of resistivity measurements and the number of selected basis vectors allowed for significant improvements in the reconstructed images.

Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD)

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2015-01-01

Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD) Manual v.1.2 The capability of an inspection system is established by applications of various methodologies to determine the probability of detection (POD). One accepted metric of an adequate inspection system is that there is 95% confidence that the POD is greater than 90% (90/95 POD). Design of experiments for validating probability of detection capability of nondestructive evaluation (NDE) systems (DOEPOD) is a methodology that is implemented via software to serve as a diagnostic tool providing detailed analysis of POD test data, guidance on establishing data distribution requirements, and resolving test issues. DOEPOD demands utilization of observance of occurrences. The DOEPOD capability has been developed to provide an efficient and accurate methodology that yields observed POD and confidence bounds for both Hit-Miss or signal amplitude testing. DOEPOD does not assume prescribed POD logarithmic or similar functions with assumed adequacy over a wide range of flaw sizes and inspection system technologies, so that multi-parameter curve fitting or model optimization approaches to generate a POD curve are not required. DOEPOD applications for supporting inspector qualifications is included.

Flow Control

DTIC Science & Technology

2013-04-08

fined as p( xs , t), to the flow state which is modeled by the time coefficients of a POD truncation (a fj (t) in equation 17) (Note: the f superscript...spatially to desired flow features (e.g. vortex shedding, vortex pairing, boundary layer growth, separation points, etc.) are chosen and defined as ( xs ...within the numeric simulation. A surface POD analysis, p( xs , t)≃ k ∑ p=1 asp(t)ϕsp( xs ), (30) yields surface POD modes φ sp( xs ). The resulting

Effectiveness of Video Modeling to Teach "iPod" Use to Students with Moderate Intellectual Disabilities

ERIC Educational Resources Information Center

Hammond, Diana L.; Whatley, Abigail D.; Ayres, Kevin M.; Gast, David L.

2010-01-01

The primary purpose of this study was to examine the effects of video modeling delivered via computer on accurate and independent use of an iPod by three participants with moderate intellectual disabilities. In the context of combined multiple probes across participants and replicated across tasks, three female middle school students learned to…

Flow Control

DTIC Science & Technology

2013-04-08

estimator will relate an array of surface mounted sensor signals, de- fined as p( xs , t), to the flow state which is modeled by the time coefficients of a POD...layer growth, separation points, etc.) are chosen and defined as ( xs ) within the numeric simulation. A surface POD analysis, p( xs , t)≃ k ∑ p=1 asp(t)ϕsp... xs ), (30) yields surface POD modes φ sp( xs ). The resulting locations of the maxima and minima of the sur- face modes show where the largest

Estimated SLR station position and network frame sensitivity to time-varying gravity

NASA Astrophysics Data System (ADS)

Zelensky, Nikita P.; Lemoine, Frank G.; Chinn, Douglas S.; Melachroinos, Stavros; Beckley, Brian D.; Beall, Jennifer Wiser; Bordyugov, Oleg

2014-06-01

This paper evaluates the sensitivity of ITRF2008-based satellite laser ranging (SLR) station positions estimated weekly using LAGEOS-1/2 data from 1993 to 2012 to non-tidal time-varying gravity (TVG). Two primary methods for modeling TVG from degree-2 are employed. The operational approach applies an annual GRACE-derived field, and IERS recommended linear rates for five coefficients. The experimental approach uses low-order/degree coefficients estimated weekly from SLR and DORIS processing of up to 11 satellites (tvg4x4). This study shows that the LAGEOS-1/2 orbits and the weekly station solutions are sensitive to more detailed modeling of TVG than prescribed in the current IERS standards. Over 1993-2012 tvg4x4 improves SLR residuals by 18 % and shows 10 % RMS improvement in station stability. Tests suggest that the improved stability of the tvg4x4 POD solution frame may help clarify geophysical signals present in the estimated station position time series. The signals include linear and seasonal station motion, and motion of the TRF origin, particularly in Z. The effect on both POD and the station solutions becomes increasingly evident starting in 2006. Over 2008-2012, the tvg4x4 series improves SLR residuals by 29 %. Use of the GRGS RL02 series shows similar improvement in POD. Using tvg4x4, secular changes in the TRF origin Z component double over the last decade and although not conclusive, it is consistent with increased geocenter rate expected due to continental ice melt. The test results indicate that accurate modeling of TVG is necessary for improvement of station position estimation using SLR data.

Security Inference from Noisy Data

DTIC Science & Technology

2008-04-08

and RFID chips, introduce new ways of communication and sharing data. For ex- ample, the Nike +iPod Sport Kit is a new wireless accessory for the iPod...Agrawal show: • A wide variety (e.g. different keyboards of the same model, different models, different brands ) of keyboards have keys with distinct...grammar level and spelling level in this case) are built into a single model. Algorithms to maximize global joint probability may improve the

Landing instrument packages on regolith in micro gravity: point designs for passive, self-righting landers

NASA Astrophysics Data System (ADS)

Movshovitz, N.; Asphaug, E. I.

2012-12-01

A small asteroid is likely to be the target of the next human exploration mission. Undoubtedly, a robotic mission will precede, whose main objective will be to characterize the target; this would have to include deployment of sensory instruments on the surface. The surface properties of small bodies are largely unknown, and this makes it essential to have detailed models for package deployment. We evaluate low cost, low risk, lander designs by considering 'pods' that have no moving parts, no guidance or thrust, that are designed to be thrown to the surface from the orbiting spacecraft. The design goal is to "encourage" the pods to land upright regardless of surface properties. With no need for guidance or articulation, these pods can be made and deployed to the surface at low cost and low risk. The challenge, of course, is to design the pods to land right-side-up, consistently, in a low gravity environment. In such an environment a body may experience cohesive forces comparable to its weight. These forces will effectively modify the physical parameters controlling a mechanical system, primarily the coefficients of friction and restitution. To make things worse, gravity will not always be pointing "down", as the presence of mass concentrations will tilt the gravity acceleration vector in unpredictable directions. We consider three point designs: (1) a weighted ellipsoidal shape, the bottom several times as dense as the top, analogous to the children's toy; (2) a pod with one side elastic and the other side inelastic; and (3) a combination of both weight distribution and material properties. We have used a discrete element model based on NVIDIA's PhysX library to design a simulation software suitable for modeling astrophysical rubble (Movshovitz, Asphaug and Korycansky, submitted). We then deploy different pod designs onto a numerical regolith testbed. Initial studies are very promising, although to date we have not included forces such as cohesion, and the effect of much smaller grain sizes than can be resolved in our simulations. We study the effect of bulk density, the velocity of deployment, and the effects of a tumbling or spinning deployment to the comet or asteroid surface. We are able to model the utility of internal actuators (vibrators, thumpers) that can rearrange or pods on the surface, or serve to embed them into a bed of loose soil. The size of the pods we are studying is ~30 cm average diameter. The key variables are shape, density distribution, and elastic properties, modeled by a coefficient of restitution. Our models benefit from asynchronous, parallel execution of the gravity module on a GPU, while the rigid-body dynamics module executes on a multi-threaded CPU for maximum performance.

Procalcitonin and C-reactive protein as early markers of anastomotic leak after laparoscopic colorectal surgery within an enhanced recovery after surgery (ERAS) program.

PubMed

Muñoz, José Luis; Alvarez, María Oliva; Cuquerella, Vicent; Miranda, Elena; Picó, Carlos; Flores, Raquel; Resalt-Pereira, Marta; Moya, Pedro; Pérez, Ana; Arroyo, Antonio

2018-03-08

C-reactive protein (CRP) and procalcitonin (PCT) have been described as good predictors of anastomotic leak after colorectal surgery, obtaining the highest diagnostic accuracy on the 5th postoperative day. However, if an enhanced recovery after surgery (ERAS) program is performed, early predictors are needed in order to ensure a safe and early discharge. The aim of this study was to investigate the efficacy of CRP, PCT, and white blood cell (WBC) count determined on first postoperative days, in predicting septic complications, especially anastomotic leak, after laparoscopic colorectal surgery performed within an ERAS program. We conducted a prospective study including 134 patients who underwent laparoscopic colorectal surgery within an ERAS program between 2015 and 2017. The primary endpoint investigated was anastomotic leak. CRP, PCT, and WBC count were determined in the blood sample extracted on postoperative day 1 (POD 1), POD 2 and POD 3. Anastomotic leak (AL) was detected in 6 patients (4.5%). Serum levels of CRP and PCT, but not WBC, determined on POD 1, POD 2, and POD 3 were significantly higher in patients who had AL in the postoperative course. Using ROC analysis, the best AUC of the CRP and PCT levels was on POD 3 (0.837 and 0.947, respectively). A CRP cutoff level at 163 mg/l yielded 85% sensitivity, 80% specificity, and 99% negative predictive value (NPV). A PCT cutoff level at 2.5 ng/ml achieved 85% sensitivity, 95% specificity, 44% positive predictive value, and 99% NPV. CRP and PCT are relevant markers for detecting postoperative AL after laparoscopic colorectal surgery. Furthermore, they can ensure an early discharge with a low probability of AL when an ERAS program is performed.

[Effects of two phenolic acids on root zone soil nutrients, soil enzyme activities and pod yield of peanut].

PubMed

Li, Qing Kai; Liu, Ping; Tang, Zhao Hui; Zhao, Hai Jun; Wang, Jiang Tao; Song, Xiao Zong; Yang, Li; Wan, Shu Bo

2016-04-22

In order to investigate the relationship between the accumulation of phenolic acids in peanut continuous cropping soil and the continuous cropping obstacle of peanut, the effects of p-hydroxy benzoic acid and cinnamic acid on peanut root zone soil nutrients, soil enzyme activities and yield of peanut were studied by pot experiment at three stages of peanut, i.e. the pegging stage of peanut (45 days after seedling), the early podding (75 days after seedling) and the end of podding (105 days after seedling) stages. The results showed that the peanut root zone soil nutrients and enzyme activities changed obviously under the two phenolic acids treatment, especially at the pegging stage of peanut. The soil alkali-hydrolyzable nitrogen, available phosphorus, available potassium, and soil enzyme activities (urease, sucrose, neutral phosphatase) were decreased significantly. At the early and end of podding stages of peanut, the effects of the two phenolic acids on peanut root zone soil nutrients and soil enzyme activities were under a weakening trend. The allelopathy of cinnamic acid was stronger than that of p-hydroxy benzoic acid at the same initial content. The pod yield per pot was reduced by 45.9% and 52.8%, while the pod number of per plant was reduced by 46.2% and 48.9% at higher concentration (80 mg·kg -1 dry soil) of p-hydroxy benzoic acid and cinnamic acid treatments, respectively.

Intial orbit determination results for Jason-1: towards a 1-cm orbit

NASA Technical Reports Server (NTRS)

Haines, B. J.; Haines, B.; Bertiger, W.; Desai, S.; Kuang, D.; Munson, T.; Reichert, A.; Young, L.; Willis, P.

2002-01-01

The U.S/France Jason-1 oceanographic mission is carrying state-of-the-art radiometric tracking systems (GPS and Doris) to support precise orbit determination (POD) requirements. The performance of the systems is strongly reflected in the early POD results. Results of both internal and external (e.g., satellite laser ranging) comparisons support that the 2.5 cm radial Rh4S requirement is being readily met, and provide reasons for optimism that 1 cm can be achieved. We discuss the POD strategy underlying these orbits, as well as the challenging issues that bear on the understanding and characterization of an orbit solution at the l-cm level. We also describe a system for producing science quality orbits in near real time in order to support emerging applications in operational oceanography.

Enhanced anastomotic healing by Daikenchuto (TJ-100) in rats.

PubMed

Wada, Toshiaki; Kawada, Kenji; Hirai, Kenjiro; Toda, Kosuke; Iwamoto, Masayoshi; Hasegawa, Suguru; Sakai, Yoshiharu

2018-01-18

Daikenchuto (DKT), a traditional Japanese medicine, is widely used to treat various gastrointestinal disorders. This study aimed to investigate whether DKT could promote the anastomotic healing in a rat model. Pedicled colonic segments were made in left colon by ligation of the feeding arteries, and then intestinal continuity was restored. Colonic blood flow was analyzed by using ICG fluorescence imaging: Fmax, Tmax, T1/2, and Slope were calculated. Anastomotic leakage (AL) was found in 6 of 19 rats (31.6%) in the control group, whereas in 1 of 16 rats (6.2%) in the DKT group. The Fmax and Slope of DKT group were significantly higher than those of control group. DKT could promote the anastomotic healing, with the higher bursting pressure on postoperative day (POD) 2 and 5, the larger granulation thickness on POD 5, and neoangiogenesis on POD 5. Histological examination showed DKT exhibited a decreased inflammatory cell infiltration, enhanced fibroblast infiltration, and enhanced collagen density on POD 5. In the DKT group, the levels of TGFβ1 on POD 2 and VEGFα on POD5 were significantly higher, whereas the level of TNFα on POD 2 was significantly lower. Therefore, DKT could be effective for the prevention of AL following colorectal surgery.

Precise orbit determination of the Fengyun-3C satellite using onboard GPS and BDS observations

NASA Astrophysics Data System (ADS)

Li, Min; Li, Wenwen; Shi, Chuang; Jiang, Kecai; Guo, Xiang; Dai, Xiaolei; Meng, Xiangguang; Yang, Zhongdong; Yang, Guanglin; Liao, Mi

2017-11-01

The GNSS Occultation Sounder instrument onboard the Chinese meteorological satellite Fengyun-3C (FY-3C) tracks both GPS and BDS signals for orbit determination. One month's worth of the onboard dual-frequency GPS and BDS data during March 2015 from the FY-3C satellite is analyzed in this study. The onboard BDS and GPS measurement quality is evaluated in terms of data quantity as well as code multipath error. Severe multipath errors for BDS code ranges are observed especially for high elevations for BDS medium earth orbit satellites (MEOs). The code multipath errors are estimated as piecewise linear model in 2{°}× 2{°} grid and applied in precise orbit determination (POD) calculations. POD of FY-3C is firstly performed with GPS data, which shows orbit consistency of approximate 2.7 cm in 3D RMS (root mean square) by overlap comparisons; the estimated orbits are then used as reference orbits for evaluating the orbit precision of GPS and BDS combined POD as well as BDS-based POD. It is indicated that inclusion of BDS geosynchronous orbit satellites (GEOs) could degrade POD precision seriously. The precisions of orbit estimates by combined POD and BDS-based POD are 3.4 and 30.1 cm in 3D RMS when GEOs are involved, respectively. However, if BDS GEOs are excluded, the combined POD can reach similar precision with respect to GPS POD, showing orbit differences about 0.8 cm, while the orbit precision of BDS-based POD can be improved to 8.4 cm. These results indicate that the POD performance with onboard BDS data alone can reach precision better than 10 cm with only five BDS inclined geosynchronous satellite orbit satellites and three MEOs. As the GNOS receiver can only track six BDS satellites for orbit positioning at its maximum channel, it can be expected that the performance of POD with onboard BDS data can be further improved if more observations are generated without such restrictions.

Circumferential Esophageal Replacement by a Tissue-engineered Substitute Using Mesenchymal Stem Cells

PubMed Central

Catry, Jonathan; Luong-Nguyen, Minh; Arakelian, Lousineh; Poghosyan, Tigran; Bruneval, Patrick; Domet, Thomas; Michaud, Laurent; Sfeir, Rony; Gottrand, Frederic; Larghero, Jerome; Vanneaux, Valerie

2018-01-01

Tissue engineering appears promising as an alternative technique for esophageal replacement. Mesenchymal stem cells (MSCs) could be of interest for esophageal regeneration. Evaluation of the ability of an acellular matrix seeded with autologous MSCs to promote tissue remodeling toward an esophageal phenotype after circumferential replacement of the esophagus in a mini pig model. A 3 cm long circumferential replacement of the abdominal esophagus was performed with an MSC-seeded matrix (MSC group, n = 10) versus a matrix alone (control group, n = 10), which has previously been matured into the great omentum. The graft area was covered with an esophageal removable stent. A comparative histological analysis of the graft area after animals were euthanized sequentially is the primary outcome of the study. Histological findings after maturation, overall animal survival, and postoperative morbidity were also compared between groups. At postoperative day 45 (POD 45), a mature squamous epithelium covering the entire surface of the graft area was observed in all the MSC group specimens but in none of the control group before POD 95. Starting at POD 45, desmin positive cells were seen in the graft area in the MSC group but never in the control group. There were no differences between groups in the incidence of surgical complications and postoperative death. In this model, MSCs accelerate the mature re-epitheliazation and early initiation of muscle cell colonization. Further studies will focus on the use of cell tracking tools in order to analyze the becoming of these cells and the mechanisms involved in this tissue regeneration. PMID:29390879

Reduced-order modeling with sparse polynomial chaos expansion and dimension reduction for evaluating the impact of CO2 and brine leakage on groundwater

NASA Astrophysics Data System (ADS)

Liu, Y.; Zheng, L.; Pau, G. S. H.

2016-12-01

A careful assessment of the risk associated with geologic CO2 storage is critical to the deployment of large-scale storage projects. While numerical modeling is an indispensable tool for risk assessment, there has been increasing need in considering and addressing uncertainties in the numerical models. However, uncertainty analyses have been significantly hindered by the computational complexity of the model. As a remedy, reduced-order models (ROM), which serve as computationally efficient surrogates for high-fidelity models (HFM), have been employed. The ROM is constructed at the expense of an initial set of HFM simulations, and afterwards can be relied upon to predict the model output values at minimal cost. The ROM presented here is part of National Risk Assessment Program (NRAP) and intends to predict the water quality change in groundwater in response to hypothetical CO2 and brine leakage. The HFM based on which the ROM is derived is a multiphase flow and reactive transport model, with 3-D heterogeneous flow field and complex chemical reactions including aqueous complexation, mineral dissolution/precipitation, adsorption/desorption via surface complexation and cation exchange. Reduced-order modeling techniques based on polynomial basis expansion, such as polynomial chaos expansion (PCE), are widely used in the literature. However, the accuracy of such ROMs can be affected by the sparse structure of the coefficients of the expansion. Failing to identify vanishing polynomial coefficients introduces unnecessary sampling errors, the accumulation of which deteriorates the accuracy of the ROMs. To address this issue, we treat the PCE as a sparse Bayesian learning (SBL) problem, and the sparsity is obtained by detecting and including only the non-zero PCE coefficients one at a time by iteratively selecting the most contributing coefficients. The computational complexity due to predicting the entire 3-D concentration fields is further mitigated by a dimension reduction procedure-proper orthogonal decomposition (POD). Our numerical results show that utilizing the sparse structure and POD significantly enhances the accuracy and efficiency of the ROMs, laying the basis for further analyses that necessitate a large number of model simulations.

Koopman Mode Decomposition Methods in Dynamic Stall: Reduced Order Modeling and Control

DTIC Science & Technology

2015-11-10

the flow phenomena by separating them into individual modes. The technique of Proper Orthogonal Decomposition (POD), see [ Holmes : 1998] is a popular...sampled values h(k), k = 0,…,2M-1, of the exponential sum 1. Solve the following linear system where 2. Compute all zeros zj  D, j = 1,…,M...of the Prony polynomial i.e., calculate all eigenvalues of the associated companion matrix and form fj = log zj for j = 1,…,M, where log is the

The impact of psychomotor subtypes and duration of delirium on 6-month mortality in hip-fractured elderly patients.

PubMed

Bellelli, Giuseppe; Carnevali, Lucio; Corsi, Maurizio; Morandi, Alessandro; Zambon, Antonella; Mazzola, Paolo; Galeazzi, Marianna; Bonfanti, Alessandra; Massariello, Francesca; Szabo, Hajnalka; Oliveri, Giulia; Haas, Justin; d'Oro, Luca Cavalieri; Annoni, Giorgio

2018-05-31

Studies exploring the incidence and impact of the psychomotor subtypes of postoperative delirium (POD) on the survival of hip fracture patients are few, and results are inconsistent. We sought to assess the incidence of POD subtypes and their impact, in addition to delirium duration, on 6-month mortality in older patients after hip-fracture surgery. This is a prospective study involving 571 individuals admitted to an Orthogeriatric Unit within a 5-year period with a diagnosis of hip fracture. Survival status was assessed 6 months after posthip fracture surgery. Postoperative delirium was diagnosed using the Diagnostic and Statistical Manual of Mental Disorders. Postoperative delirium subtypes were classified according to Lipowski's criteria. Cox regressions were used to evaluate the associations between POD subtypes, POD duration, and 6-month mortality, adjusting for covariates. The incidence of psychomotor POD subtypes was hypoactive 57 (10.0%), hyperactive 84 (14.7%), and mixed 79 (13.8%). Six-month mortality rates were 8.3%, 10.7%, 36.8%, and 29.1% in the no-delirium, hyperactive, hypoactive, and mixed-delirium subgroups, respectively. In adjusted models, the hypoactive subgroup (Hazard Ratio, HR = 3.14, 95% Confidence Intervals, CI, 1.63-6.04) and mixed subgroup (HR = 2.89, 95% CI, 1.49-5.62) showed high mortality rates and a significantly increased risk of mortality associated with POD duration as well. Hyperactive delirium was the most common POD psychomotor subtype, but hypoactive and mixed POD were associated with 6-month mortality risk. Moreover, the risk of death 6 months after surgery increased for both subgroups (hypoactive and mixed) with increasing duration of POD. Copyright © 2018 John Wiley & Sons, Ltd.

Seasonal and pod-specific differences in core use areas by resident killer whales in the Northern Gulf of Alaska

NASA Astrophysics Data System (ADS)

Olsen, Daniel W.; Matkin, Craig O.; Andrews, Russel D.; Atkinson, Shannon

2018-01-01

The resident killer whale is a genetically and behaviorally distinct ecotype of killer whale (Orcinus orca) found in the North Pacific that feeds primarily on Pacific salmon (Oncorhynchus spp .). Details regarding core use areas have been inferred by boat surveys, but are subject to effort bias and weather limitations. To investigate core use areas, 37 satellite tags were deployed from 2006 to 2014 on resident killer whales representing 12 pods in the Northern Gulf of Alaska, and transmissions were received during the months of June to January. Core use areas were identified through utilization distributions using a biased Brownian Bridge movement model. Distinct differences in these core use areas were revealed, and were highly specific to season and pod. In June, July, and August, the waters of Hinchinbrook Entrance and west of Kayak Island were primary areas used, mainly by 3 separate pods. These same pods shifted their focus to Montague Strait in August, September, and October. Port Gravina was a focal area for 2 other pods in June, July, and August, but this was not the case in later months. These pods were responsible for seven of eight documented trips into the deeper fjords of Prince William Sound, yet these fjords were not a focus for most groups of killer whales. The seasonal differences in core use may be a response to the seasonal returns of salmon, though details on specific migration routes and timing for the salmon are limited. We found strong seasonal and pod-specific shifts in patterns between core use areas. Future research should investigate pod differences in diet composition and relationships between core area use and bathymetry.

Pharmacokinetics and Preliminary Safety of Pod-Intravaginal Rings Delivering the Monoclonal Antibody VRC01-N for HIV Prophylaxis in a Macaque Model.

PubMed

Zhao, Chunxia; Gunawardana, Manjula; Villinger, Francois; Baum, Marc M; Remedios-Chan, Mariana; Moench, Thomas R; Zeitlin, Larry; Whaley, Kevin J; Bohorov, Ognian; Smith, Thomas J; Anderson, Deborah J; Moss, John A

2017-07-01

The broadly neutralizing antibody (bNAb) VRC01, capable of neutralizing 91% of known human immunodeficiency virus type 1 (HIV-1) isolates in vitro , is a promising candidate microbicide for preventing sexual HIV infection when administered topically to the vagina; however, accessibility to antibody-based prophylactic treatment by target populations in sub-Saharan Africa and other underdeveloped regions may be limited by the high cost of conventionally produced antibodies and the limited capacity to manufacture such antibodies. Intravaginal rings of the pod design (pod-IVRs) delivering Nicotiana -manufactured VRC01 (VRC01-N) over a range of release rates have been developed. The pharmacokinetics and preliminary safety of VRC01-N pod-IVRs were evaluated in a rhesus macaque model. The devices sustained VRC01-N release for up to 21 days at controlled rates, with mean steady-state VRC01-N levels in vaginal fluids in the range of 10 2 to 10 3 μg g -1 being correlated with in vitro release rates. No adverse safety indications were observed. These findings indicate that pod-IVRs are promising devices for the delivery of the candidate topical microbicide VRC01-N against HIV-1 infection and merit further preclinical evaluation. Copyright © 2017 American Society for Microbiology.

Effect of cultural conditions on the seed-to-seed growth of Arabidopsis and Cardamine - A study of growth rates and reproductive development as affected by test tube seals

NASA Technical Reports Server (NTRS)

Hoshizaki, T.

1982-01-01

The effects of test tube seals on the growth, flowering, and seed pod formation of Arabidopsis thaliana (L.) Heynh., mouse ear cress, and Cardamine oligosperma Nutt, bitter cress, are studied in order to assess the conditions used in weightlessness experiments. Among other results, it is found that the growth (height) and flowering (date of bud appearance) were suppressed in mouse ear cress in tubes sealed with Saran. Seed pod formation which occurred by day 45 in open-to-air controls, was still lacking in the sealed plants even up to day 124. The growth and flowering of bitter cress were also suppressed by the Saran seal, although up to day 55 the Saran-sealed plants were taller. It is suggested that atmospheric composition was the cause of the suppression of growth, flowering, and seed pod development in these plants, since the mouse ear cress renewed their growth and then set seed pods after the Saran seal was ruptured.

Comparative efficacy of storage bags, storability and damage potential of bruchid beetle.

PubMed

Harish, G; Nataraja, M V; Ajay, B C; Holajjer, Prasanna; Savaliya, S D; Gedia, M V

2014-12-01

Groundnut during storage is attacked by number of stored grain pests and management of these insect pests particularly bruchid beetle, Caryedon serratus (Oliver) is of prime importance as they directly damage the pod and kernels. In this regard different storage bags that could be used and duration up to which we can store groundnut has been studied. Super grain bag recorded minimum number of eggs laid and less damage and minimum weight loss in pods and kernels in comparison to other storage bags. Analysis of variance for multiple regression models were found to be significant in all bags for variables viz, number of eggs laid, damage in pods and kernels, weight loss in pods and kernels throughout the season. Multiple comparison results showed that there was a high probability of eggs laid and pod damage in lino bag, fertilizer bag and gunny bag, whereas super grain bag was found to be more effective in managing the C. serratus owing to very low air circulation.

Variability within Systemic In Vivo Toxicity Points-of-Departure (SOT)

EPA Science Inventory

In vivo studies have long been considered the gold standard for toxicology screening and deriving points of departure (POD). With the push to decrease the use of animal studies, predictive models using in vivo data are being developed to estimate POD. However, recent work has il...

Issues raised by the reference doses for perfluorooctane sulfonate and perfluorooctanoic acid.

PubMed

Dong, Zhaomin; Bahar, Md Mezbaul; Jit, Joytishna; Kennedy, Bruce; Priestly, Brian; Ng, Jack; Lamb, Dane; Liu, Yanju; Duan, Luchun; Naidu, Ravi

2017-08-01

On 25th May 2016, the U.S. EPA released reference doses (RfDs) for Perfluorooctane Sulfonate (PFOS) and Perfluorooctanoic Acid (PFOA) of 20ng/kg/day, which were much more conservative than previous values. These RfDs rely on the choices of animal point of departure (PoD) and the toxicokinetics (TK) model. At this stage, considering that the human evidence is not strong enough for RfD determination, using animal data may be appropriate but with more uncertainties. In this article, the uncertainties concerning RfDs from the choices of PoD and TK models are addressed. Firstly, the candidate PoDs should include more critical endpoints (such as immunotoxicity), which may lead to lower RfDs. Secondly, the reliability of the adopted three-compartment TK model is compromised: the parameters are not non-biologically plausible; and this TK model was applied to simulate gestation and lactation exposures, while the two exposure scenarios were not actually included in the model structure. Copyright © 2017. Published by Elsevier Ltd.

Observational test of empirical magnetopause location models using geosynchronous satellite data

NASA Astrophysics Data System (ADS)

Park, Eunsu; Moon, Y.-J.; Lee, Kangjin

2016-11-01

In this study, we identify 123 geosynchronous magnetopause crossings using geosynchronous satellite observation data from 1996 to 2010 as well as make an observational test of magnetopause location models using the identified events. For this, we consider three models: Petrinec and Russell (1996), Shue et al. (1998), and Lin et al. (2010). To evaluate the models, we estimate a probability of detection (PoD) and a critical success index (CSI) as a function of year. To examine the effect of solar cycle phase, we consider three different time periods: (1) ascending phase (1996-1999), (2) maximum phase (2000-2002), and (3) descending phase (2003-2008). Major results from this study are as follows. First, the PoD values of all models range from 0.4 to 0.8 for the most of years. Second, the PoD values of Lin et al. (2010) are noticeably higher than those of the other models. Third, the CSI values of all models range from 0.1 to 0.3, and those of Shue et al. (1998) are slightly higher than those of the other models. Fourth, the predicted magnetopause radii based on Lin et al.(2010) well match the observed ones within 1 Earth radius, while those on Shue et al. (1998) overestimate the observed ones by about 2 Earth radii. Fifth, the PoD and critical success index (CSI) values of all the models are better for the solar maximum phase than those for the other phases, implying that the models are more optimized for the phase.

Association of pre-operative medication use with post-operative delirium in surgical oncology patients receiving comprehensive geriatric assessment.

PubMed

Jeong, Young Mi; Lee, Eunsook; Kim, Kwang-Il; Chung, Jee Eun; In Park, Hae; Lee, Byung Koo; Gwak, Hye Sun

2016-07-07

Older patients undergoing surgery tend to have a higher frequency of delirium. Delirium is strongly associated with poor surgical outcomes. This study evaluated the association between pre-operative medication use and post-operative delirium (POD) in surgical oncology patients receiving comprehensive geriatric assessment (CGA). A total of 475 patients who were scheduled for cancer surgery and received CGA from January 2014 to June 2015 were included. Pre-operative medication review through CGA was conducted on polypharmacy (≥5 medications), delirium-inducing medications (DIMs), fall-inducing medications (FIMs), and potentially inappropriate medications (PIMs). POD was confirmed by psychiatric consultation, and DSM-V criteria were used for diagnosing delirium. The model fit of the prediction model was assessed by computing the Hosmer-Lemeshow goodness-of-fit test. Effect size was measured using the Nagelkerke R(2). Discrimination of the model was assessed by an analysis of the area under receiver operating curve (AUROC). Two models were constructed for multivariate analysis based on univariate analysis; model I included dementia and DIM in addition to age and sex, and model II included PIM instead of DIM of model I. Every one year increase of age increased the risk of POD by about 1.1-fold. DIM was a significant factor for POD after adjusting for confounders (AOR 12.78, 95 % CI 2.83-57.74). PIM was also a significant factor for POD (AOR 5.53, 95 % CI 2.03-15.05). The Hosmer-Lemeshow test results revealed good fits for both models (χ(2) = 3.842, p = 0.871 for model I and χ(2) = 8.130, p = 0.421 for model II). The Nagelkerke R(2) effect size and AUROC for model I was 0.215 and 0.833, respectively. Model II had the Nagelkerke R(2)effect size of 0.174 and AUROC of 0.819. These results suggest that pharmacists' comprehensive review for pre-operative medication use is critical for the post-operative outcomes like delirium in older patients.

Projection-Based Reduced Order Modeling for Spacecraft Thermal Analysis

NASA Technical Reports Server (NTRS)

Qian, Jing; Wang, Yi; Song, Hongjun; Pant, Kapil; Peabody, Hume; Ku, Jentung; Butler, Charles D.

2015-01-01

This paper presents a mathematically rigorous, subspace projection-based reduced order modeling (ROM) methodology and an integrated framework to automatically generate reduced order models for spacecraft thermal analysis. Two key steps in the reduced order modeling procedure are described: (1) the acquisition of a full-scale spacecraft model in the ordinary differential equation (ODE) and differential algebraic equation (DAE) form to resolve its dynamic thermal behavior; and (2) the ROM to markedly reduce the dimension of the full-scale model. Specifically, proper orthogonal decomposition (POD) in conjunction with discrete empirical interpolation method (DEIM) and trajectory piece-wise linear (TPWL) methods are developed to address the strong nonlinear thermal effects due to coupled conductive and radiative heat transfer in the spacecraft environment. Case studies using NASA-relevant satellite models are undertaken to verify the capability and to assess the computational performance of the ROM technique in terms of speed-up and error relative to the full-scale model. ROM exhibits excellent agreement in spatiotemporal thermal profiles (<0.5% relative error in pertinent time scales) along with salient computational acceleration (up to two orders of magnitude speed-up) over the full-scale analysis. These findings establish the feasibility of ROM to perform rational and computationally affordable thermal analysis, develop reliable thermal control strategies for spacecraft, and greatly reduce the development cycle times and costs.

Simple methodologies to estimate the energy amount stored in a tree due to an explosive seed dispersal mechanism

NASA Astrophysics Data System (ADS)

do Carmo, Eduardo; Goncalves Hönnicke, Marcelo

2018-05-01

There are different forms to introduce/illustrate the energy concepts for the basic physics students. The explosive seed dispersal mechanism found in a variety of trees could be one of them. Sibipiruna trees carry out fruits (pods) who show such an explosive mechanism. During the explosion, the pods throw out seeds several meters away. In this manuscript we show simple methodologies to estimate the energy amount stored in the Sibipiruna tree due to such a process. Two different physics approaches were used to carry out this study: by monitoring indoor and in situ the explosive seed dispersal mechanism and by measuring the elastic constant of the pod shell. An energy of the order of kJ was found to be stored in a single tree due to such an explosive mechanism.

Postoperative plasma 8-iso-prostaglandin F2α levels are associated with delirium and cognitive dysfunction in elderly patients after hip fracture surgery.

PubMed

Zheng, Yuan-Bo; Ruan, Guo-Mo; Fu, Jia-Xing; Su, Zhong-Liang; Cheng, Peng; Lu, Jian-Zuo

2016-04-01

Oxidative stress may be involved in occurrence of postoperative delirium (POD) and cognitive dysfunction (POCD). 8-iso-Prostaglandin F2α (8-iso-PGF2α), an isoprostane derived from arachidonic acid via lipid peroxidation, is considered a gold standard for measuring oxidative stress. The present study aimed to investigate the ability of postoperative plasma 8-iso-PGF2α levels to predict POD and POCD in elderly patients undergoing hip fracture surgery. Postoperative plasma 8-iso-PGF2α levels of 182 patients were measured by an enzyme-linked immunosorbent assay. We assessed the relationships between plasma 8-iso-PGF2α levels and the risk of POD and POCD using a multivariate analysis. Plasma 8-iso-PGF2α levels and age were identified as the independent predictors for POD and POCD. Based on areas under receiver operating characteristic curve, the predictive values of 8-iso-PGF2α were obviously higher than those of age for POD and POCD. In a combined logistic-regression model, 8-iso-PGF2α significantly enhanced the areas under curve of age for prediction of POD and POCD. Postoperative plasma 8-iso-PGF2α levels may have the potential to predict POD and POCD in elder patients undergoing hip fracture surgery. Copyright © 2016 Elsevier B.V. All rights reserved.

Copernicus POD Service: Orbit Determination of the Sentinel Satellites

NASA Astrophysics Data System (ADS)

Peter, Heike; Fernández, Jaime; Ayuga, Francisco; Féménias, Pierre

2016-04-01

The Copernicus POD (Precise Orbit Determination) Service is part of the Copernicus Processing Data Ground Segment (PDGS) of the Sentinel-1, -2 and -3 missions. A GMV-led consortium is operating the Copernicus POD Service being in charge of generating precise orbital products and auxiliary data files for their use as part of the processing chains of the respective Sentinel PDGS. Sentinel-1A was launched in April 2014 while Sentinel-2A was on June 2015 and both are routinely operated since then. Sentinel-3A is expected to be launched in February 2016 and Sentinel-1B is planned for spring 2016. Thus the CPOD Service will be operating three to four satellites simultaneously in spring 2016. The satellites of the Sentinel-1, -2, and -3 missions are all equipped with dual frequency high precision GPS receivers delivering the main observables for POD. Sentinel-3 satellites will additionally be equipped with a laser retro reflector for Satellite Laser Ranging and a receiver for DORIS tracking. All three types of observables (GPS, SLR and DORIS) will be used routinely for POD. The POD core of the CPOD Service is NAPEOS (Navigation Package for Earth Orbiting Satellites) the leading ESA/ESOC software for precise orbit determination. The careful selection of models and inputs is important to achieve the different but very demanding requirements in terms of orbital accuracy and timeliness for the Sentinel -1, -2 & -3 missions. The three missions require orbital products with various latencies from 30 minutes up to 20-30 days. The accuracy requirements are also different and partly very challenging, targeting 5 cm in 3D for Sentinel-1 and 2-3 cm in radial direction for Sentinel-3. Although the characteristics and the requirements are different for the three missions the same core POD setup is used to the largest extent possible. This strategy facilitates maintenance of the complex system of the CPOD Service. Updates in the dynamical modelling of the satellite orbits, e.g. improvements of the box-wing models, have been done to deliver best possible orbit solutions for the satellite. Quality control of the CPOD orbits is done by validating them with independent orbit solutions provided by the Copernicus POD Quality Working Group. The cross-comparison of orbit solutions from different institutions is essential to monitor and to improve the orbit accuracy because for Sentinel-1 and -2 this is the only possibility to externally assess the quality of the orbits. Sentinel-3 orbits may additionally be validated by using SLR and DORIS observations. This paper presents the Copernicus POD Service in terms of operations and orbital accuracy achieved by the different orbit products of the different missions. For Sentinel-1 and Sentinel-2, this paper presents the impact of the box-wing models. For Sentinel-3, the orbital accuracy will be assessed using the very first data after launch.

Fungal endophytes of Vanilla planifolia across Réunion Island: isolation, distribution and biotransformation.

PubMed

Khoyratty, Shahnoo; Dupont, Joëlle; Lacoste, Sandrine; Palama, Tony Lionel; Choi, Young Hae; Kim, Hye Kyong; Payet, Bertrand; Grisoni, Michel; Fouillaud, Mireille; Verpoorte, Robert; Kodja, Hippolyte

2015-06-14

The objective of the work was to characterize fungal endophytes from aerial parts of Vanilla planifolia. Also, to establish their biotransformation abilities of flavor-related metabolites. This was done in order to find a potential role of endophytes on vanilla flavors. Twenty three MOTUs were obtained, representing 6 fungal classes. Fungi from green pods were cultured on mature green pod based media for 30 days followed by (1)H NMR and HPLC-DAD analysis. All fungi from pods consumed metabolized vanilla flavor phenolics. Though Fusarium proliferatum was recovered more often (37.6% of the isolates), it is Pestalotiopsis microspora (3.0%) that increased the absolute amounts (quantified by (1)H NMR in μmol/g DW green pods) of vanillin (37.0 × 10(-3)), vanillyl alcohol (100.0 × 10(-3)), vanillic acid (9.2 × 10(-3)) and p-hydroxybenzoic acid (87.9 × 10(-3)) by significant amounts. All plants studied contained endophytic fungi and the isolation of the endophytes was conducted from plant organs at nine sites in Réunion Island including under shade house and undergrowth conditions. Endophytic variation occured between cultivation practices and the type of organ. Given the physical proximity of fungi inside pods, endophytic biotransformation may contribute to the complexity of vanilla flavors.

Numerical modelling as a cost-reduction tool for probability of detection of bolt hole eddy current testing

NASA Astrophysics Data System (ADS)

Mandache, C.; Khan, M.; Fahr, A.; Yanishevsky, M.

2011-03-01

Probability of detection (PoD) studies are broadly used to determine the reliability of specific nondestructive inspection procedures, as well as to provide data for damage tolerance life estimations and calculation of inspection intervals for critical components. They require inspections on a large set of samples, a fact that makes these statistical assessments time- and cost-consuming. Physics-based numerical simulations of nondestructive testing inspections could be used as a cost-effective alternative to empirical investigations. They realistically predict the inspection outputs as functions of the input characteristics related to the test piece, transducer and instrument settings, which are subsequently used to partially substitute and/or complement inspection data in PoD analysis. This work focuses on the numerical modelling aspects of eddy current testing for the bolt hole inspections of wing box structures typical of the Lockheed Martin C-130 Hercules and P-3 Orion aircraft, found in the air force inventory of many countries. Boundary element-based numerical modelling software was employed to predict the eddy current signal responses when varying inspection parameters related to probe characteristics, crack geometry and test piece properties. Two demonstrator exercises were used for eddy current signal prediction when lowering the driver probe frequency and changing the material's electrical conductivity, followed by subsequent discussions and examination of the implications on using simulated data in the PoD analysis. Despite some simplifying assumptions, the modelled eddy current signals were found to provide similar results to the actual inspections. It is concluded that physics-based numerical simulations have the potential to partially substitute or complement inspection data required for PoD studies, reducing the cost, time, effort and resources necessary for a full empirical PoD assessment.

Large eddy simulation study of the kinetic energy entrainment by energetic turbulent flow structures in large wind farms

NASA Astrophysics Data System (ADS)

VerHulst, Claire; Meneveau, Charles

2014-02-01

In this study, we address the question of how kinetic energy is entrained into large wind turbine arrays and, in particular, how large-scale flow structures contribute to such entrainment. Previous research has shown this entrainment to be an important limiting factor in the performance of very large arrays where the flow becomes fully developed and there is a balance between the forcing of the atmospheric boundary layer and the resistance of the wind turbines. Given the high Reynolds numbers and domain sizes on the order of kilometers, we rely on wall-modeled large eddy simulation (LES) to simulate turbulent flow within the wind farm. Three-dimensional proper orthogonal decomposition (POD) analysis is then used to identify the most energetic flow structures present in the LES data. We quantify the contribution of each POD mode to the kinetic energy entrainment and its dependence on the layout of the wind turbine array. The primary large-scale structures are found to be streamwise, counter-rotating vortices located above the height of the wind turbines. While the flow is periodic, the geometry is not invariant to all horizontal translations due to the presence of the wind turbines and thus POD modes need not be Fourier modes. Differences of the obtained modes with Fourier modes are documented. Some of the modes are responsible for a large fraction of the kinetic energy flux to the wind turbine region. Surprisingly, more flow structures (POD modes) are needed to capture at least 40% of the turbulent kinetic energy, for which the POD analysis is optimal, than are needed to capture at least 40% of the kinetic energy flux to the turbines. For comparison, we consider the cases of aligned and staggered wind turbine arrays in a neutral atmospheric boundary layer as well as a reference case without wind turbines. While the general characteristics of the flow structures are robust, the net kinetic energy entrainment to the turbines depends on the presence and relative arrangement of the wind turbines in the domain.

An adaptive model order reduction by proper snapshot selection for nonlinear dynamical problems

NASA Astrophysics Data System (ADS)

Nigro, P. S. B.; Anndif, M.; Teixeira, Y.; Pimenta, P. M.; Wriggers, P.

2016-04-01

Model Order Reduction (MOR) methods are employed in many fields of Engineering in order to reduce the processing time of complex computational simulations. A usual approach to achieve this is the application of Galerkin projection to generate representative subspaces (reduced spaces). However, when strong nonlinearities in a dynamical system are present and this technique is employed several times along the simulation, it can be very inefficient. This work proposes a new adaptive strategy, which ensures low computational cost and small error to deal with this problem. This work also presents a new method to select snapshots named Proper Snapshot Selection (PSS). The objective of the PSS is to obtain a good balance between accuracy and computational cost by improving the adaptive strategy through a better snapshot selection in real time (online analysis). With this method, it is possible a substantial reduction of the subspace, keeping the quality of the model without the use of the Proper Orthogonal Decomposition (POD).

Supporting the Copernicus POD Service

NASA Astrophysics Data System (ADS)

Peter, Heike; Springer, Tim; Otten, Michiel; Fernandez, Jaime; Escobar, Diego; Femenias, Pierre

2015-12-01

The Copernicus POD (Precise Orbit Determination) Service is part of the Copernicus PDGS (Payload Data Ground Segment) of the Sentinel missions. A GMV-led consortium is operating the Copernicus POD Service being in charge of generating precise orbital products and auxiliary data files for their use as part of the processing chains of the respective Sentinel PDGS. As part of the consortium PosiTim is responsible for implementing and testing software and model updates thoroughly before integrating them in the operational chain of the Copernicus POD Service. The NAPEOS (Navigation Package for Earth Observation Satellites) software is used for the generation of the orbit products within the Copernicus POD Service. The test procedures and results obtained for a recent software and model update to IERS 2010 Conventions are presented. It has been tested as well that the arc length of 72 hours for the non-time critical (NTC) orbit solutions might be shorten to 48 hours without losing accuracy. Orbit comparisons to external solutions help to validate the different orbit solutions. GPS antenna phase centre variations (PCVs) are one of the largest systematic error sources in POD. Since the satellite body may cause signal multipath a ground calibration of the GPS antenna without taking into account the satellite body might not be sufficient to quantify the PCVs. The PCVs are therefore obtained by an in-flight calibration. A first map for the PCVs determined from a limited amount of data at the beginning of the mission has shown significant multipath signals in parts of the antenna for code and carrier phase measurements. Since the satellite has moving parts it has been checked carefully if these multipath regions are moving as well or if they are antenna-fixed. Normally the correction maps are only applied for the carrier phase measurements. Since significant multipath has been spotted for the code measurements as well investigations are performed to study the impact of additionally applying code correction maps in the POD process.

Pod of Ultrasonic Detection of Synthetic Hard Alpha Inclusions in Titanium Aircraft Engine Forgings

NASA Astrophysics Data System (ADS)

Thompson, R. B.; Meeker, W. Q.; Brasche, L. J. H.

2011-06-01

The probability of detection (POD) of inspection techniques is a key input to estimating the lives of structural components such as aircraft engines. This paper describes work conducted as a part of the development of POD curves for the ultrasonic detection of synthetic hard alpha (SHA) inclusions in titanium aircraft engine forgings. The sample upon which the POD curves are to be based contains four types of right circular SHAs that have been embedded in a representative titanium forging, as well as a number of flat bottomed holes (FBHs). The SHAs were of two sizes, ♯3 and ♯5, with each size including seeds with nominal nitrogen concentrations of both 3 and 17 wt. %. The FBHs included sizes of ♯1, ♯3, and ♯5. This discreteness of the data poses a number of challenges to standard processes for determining POD. For example, at each concentration of nitrogen, there are only two sizes, with 10 inspection opportunities each. Fully empirical, standard methodologies such as â versus a provide less than an ideal framework for such an analysis. For example, there is no way to describe the beam limiting effect whereby the signal no longer increases the flaw grows larger than the beam, one can only determine POD at the two concentration levels present in the block, and confidence bounds tend to be broad because of the limited data available for each case. In this paper, we will describe strategies involving the use of physics-based models to overcome these difficulties by allowing the data from all reflectors to be analyzed by a single statistical model. Included will be a discussion of the development of the physics-based model, its comparison to the experimental data (obtained at multiple sites with multiple operators) and its implications regarding the statistical analysis, whose details will be given in a separate article by Li et al. in this volume.

Geometry and Mechanics of Chiral Pod Opening

NASA Astrophysics Data System (ADS)

Sharon, Eran; Armon, Shahaf; Efrati, Efi; Kupferman, Raz

2012-02-01

We study the geometry and mechanics that drive the opening of Bauhinia seeds pods. The pod valve wall consists of two fibrous layers oriented at ± 45^o with respect to the pod axis. Upon drying, each of the layers shrinks uniaxially, perpendicularly to the fibers orientation. This active deformation turn the valve into an incompatible sheet with reference saddle-like curvature tensor and a flat (Euclidean) reference metric. These two intrinsic properties are incompatible. The shape is, therefore, selected by a stretching-bending competition. Strips cut from the valve tissue and from synthetic model material adopt various helical configurations. We provide analytical expressions for these configurations in the bending and stretching dominated regimes. Surface measurements show the transition from minimal surfaces (narrow limit) to cylindrical ones (wide limit). Finally, we show how plants use these mechanical principles using different tissue architectures.

Time Variable Gravity modeling for Precise Orbits Across the TOPEX/Poseidon, Jason-l and Jason-2 Missions

NASA Technical Reports Server (NTRS)

Zelensky, Nikita P.; Lemoine, Frank G.; Chinn, Douglas; Beckley, Brain D.; Melachroinos, Stavros; Rowlands, David D.; Luthcke, Scott B.

2011-01-01

Modeling of the Time Variable Gravity (TVG) is believed to constitute one of the the largest remaining source of orbit error for altimeter satellite POD. The GSFC operational TVG model consists of forward modeling the atmospheric gravity using ECMWF 6-hour pressure data, a GRACE derived 20x20 annual field to account for changes in the hydrology and ocean water mass, and linear rates for C20, C30, C40, based on 17 years of SLR data analysis (IERS 2003) using the EIGEN-GL04S1 (a GRACE+Lageos-based geopotential solution). Although the GSFC Operational model can be applied from 1987, there may be long-term variations not captured by these linear models, and more importantly the linear models may not be consistent with more recent surface mass trends due to global climate change, We have evaluated the impact of TVG in two different wavs: (1) by using the more recent EIGEN-6S gravity model developed by the GFZ/GRGS tearm, which consists of annual, semi-annual and secular changes in the coefficients to 50x50 determined over 8(?) years of GRACE+Lageos+GOCE data (2003-200?): (2) Application of 4x4 solutions developed from a multi satellite SLR+DORIS solution based on GGM03S that span the period from 1993 to 2011. We have evaluated the recently released EIGEN6s static and time-varying gravity field for Jason-2 (J2). Jason-I (J1), and TOPEX/Posiedon (TP) Precise Orbit Determination (POD) spanning 1993-2011. Although EIGEN6s shows significant improvement for J2POD spanning 2008 - 2011, it also shows significant degradation for TP POD from 1992. The GSFC 4x4 time SLR+DORIS-based series spans 1993 to mid 2011, and shows promise for POD. We evaluate the performance of the different TVG models based on analysis of tracking data residuals use of independent data such as altimeter crossovers, and through analysis of differences with internally-generated and externally generated orbits.

Mathematical model of compact type evaporator

NASA Astrophysics Data System (ADS)

Borovička, Martin; Hyhlík, Tomáš

2018-06-01

In this paper, development of the mathematical model for evaporator used in heat pump circuits is covered, with focus on air dehumidification application. Main target of this ad-hoc numerical model is to simulate heat and mass transfer in evaporator for prescribed inlet conditions and different geometrical parameters. Simplified 2D mathematical model is developed in MATLAB SW. Solvers for multiple heat and mass transfer problems - plate surface temperature, condensate film temperature, local heat and mass transfer coefficients, refrigerant temperature distribution, humid air enthalpy change are included as subprocedures of this model. An automatic procedure of data transfer is developed in order to use results of MATLAB model in more complex simulation within commercial CFD code. In the end, Proper Orthogonal Decomposition (POD) method is introduced and implemented into MATLAB model.

Improving BeiDou precise orbit determination using observations of onboard MEO satellite receivers

NASA Astrophysics Data System (ADS)

Ge, Haibo; Li, Bofeng; Ge, Maorong; Shen, Yunzhong; Schuh, Harald

2017-12-01

In recent years, the precise orbit determination (POD) of the regional Chinese BeiDou Navigation Satellite System (BDS) has been a hot spot because of its special constellation consisting of five geostationary earth orbit (GEO) satellites and five inclined geosynchronous satellite orbit (IGSO) satellites besides four medium earth orbit (MEO) satellites since the end of 2012. GEO and IGSO satellites play an important role in regional BDS applications. However, this brings a great challenge to the POD, especially for the GEO satellites due to their geostationary orbiting. Though a number of studies have been carried out to improve the POD performance of GEO satellites, the result is still much worse than that of IGSO and MEO, particularly in the along-track direction. The major reason is that the geostationary characteristic of a GEO satellite results in a bad geometry with respect to the ground tracking network. In order to improve the tracking geometry of the GEO satellites, a possible strategy is to mount global navigation satellite system (GNSS) receivers on MEO satellites to collect the signals from GEO/IGSO GNSS satellites so as that these observations can be used to improve GEO/IGSO POD. We extended our POD software package to simulate all the related observations and to assimilate the MEO-onboard GNSS observations in orbit determination. Based on GPS and BDS constellations, simulated studies are undertaken for various tracking scenarios. The impact of the onboard GNSS observations is investigated carefully and presented in detail. The results show that MEO-onboard observations can significantly improve the orbit precision of GEO satellites from metres to decimetres, especially in the along-track direction. The POD results of IGSO satellites also benefit from the MEO-onboard data and the precision can be improved by more than 50% in 3D direction.

FORMOSAT-3/COSMIC POD Data Processing and Initial Results

NASA Astrophysics Data System (ADS)

Tang, C.

2006-12-01

The six satellites of the collaborative Taiwan-U.S. FORMOSAT-3/COSMIC (Constellation Observing System for Meteorology, Ionosphere, and Climate) space program were successfully launched from Vandenberg, U.S.A. on April 15, 2006. As of September 7, 2006, one satellite (FM5) has already been transferred to the 800-km final orbit, while the other five satellites (FM1-4 and FM6) are currently waiting in the ~520-km parking orbit for subsequent orbit raising deployment. There are two GPS antennas with different orientation onboard each satellite whose measurements are used specifically for precise orbit determination (POD). The received GPS signals by the POD antennas were rather sparse and unstable in the initial 5 weeks. Since then, the available GPS measurements have gradually increased from 10-20% in the early stage to almost 90% in 11 weeks after the launch. For the two POD antennas (POD+X and POD-X), one antenna can perform normally and record observations from up to 9 GPS satellites in view; however, the other antenna is programmed to track up to 4 GPS satellites due to onboard memory limitation. For this reason, we first performed orbit computation using zero-difference GPS phases collected by the normal antenna. For each day's orbit computation, we designed a 6-hr (25%) overlap for inner orbital accuracy assessment, and overlap analysis shows that the achievable 3D RMS was around 19 cm, or 11 cm per axis. In a separate effort, orbit computation based on the lesser antenna was also performed. The orbital difference between the results obtained from the two antennas was significant, with a 3D RMS value of 64 cm. The early results indicate that more work is needed in order to incorporate GPS data from both antennas into a unified solution.

Expression profiles of key phenylpropanoid genes during Vanilla planifolia pod development reveal a positive correlation between PAL gene expression and vanillin biosynthesis.

PubMed

Fock-Bastide, Isabelle; Palama, Tony Lionel; Bory, Séverine; Lécolier, Aurélie; Noirot, Michel; Joët, Thierry

2014-01-01

In Vanilla planifolia pods, development of flavor precursors is dependent on the phenylpropanoid pathway. The distinctive vanilla aroma is produced by numerous phenolic compounds of which vanillin is the most important. Because of the economic importance of vanilla, vanillin biosynthetic pathways have been extensively studied but agreement has not yet been reached on the processes leading to its accumulation. In order to explore the transcriptional control exerted on these pathways, five key phenylpropanoid genes expressed during pod development were identified and their mRNA accumulation profiles were evaluated during pod development and maturation using quantitative real-time PCR. As a prerequisite for expression analysis using qRT-PCR, five potential reference genes were tested, and two genes encoding Actin and EF1 were shown to be the most stable reference genes for accurate normalization during pod development. For the first time, genes encoding a phenylalanine ammonia-lyase (VpPAL1) and a cinnamate 4-hydroxylase (VpC4H1) were identified in vanilla pods and studied during maturation. Among phenylpropanoid genes, differential regulation was observed from 3 to 8 months after pollination. VpPAL1 was gradually up-regulated, reaching the maximum expression level at maturity. In contrast, genes encoding 4HBS, C4H, OMT2 and OMT3 did not show significant increase in expression levels after the fourth month post-pollination. Expression profiling of these key phenylpropanoid genes is also discussed in light of accumulation patterns for key phenolic compounds. Interestingly, VpPAL1 gene expression was shown to be positively correlated to maturation and vanillin accumulation. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Contribution of the pod wall to seed grain filling in alfalfa.

PubMed

Wang, Hui; Hou, Longyu; Wang, Mingya; Mao, Peisheng

2016-05-23

Three genotypes of alfalfa viz. Medicago sativa (Zhongmu No. 1, Zhongmu No. 2) and M. varia (Caoyuan No. 3) grown in the filed were investigated for the contribution of pod wall and leaves by shading all pods and leaves on July 15, 20 and 25, respectively. Date was recorded for total pod weight (TPW), pod wall weight (PWW), seed weight per pod (SWP), seed number per pod (SNP) and single seed weight (SSW) of one-coil and two-coil spiral pods. TPW, SNP, PWW and SWP were reduced by shading all leaves or pods, whereas SSW was not significantly affected. The relative photosynthetic contribution of pod wall to SWP was 25.6-48.1% in three genotypes on July 15. The pod wall in one-coil spiral pods generated a greater relative contribution to the TPW and SWP than in two-coil spiral pods. In the last stage (July 25), the relative photosynthetic contribution of leaves to SWP sharply decreased, whereas the relative photosynthetic contribution of pod wall to SWP was stable in the late stage (July 20 and 25). In conclusion, the pod wall of alfalfa could carry out photosynthesis and the pod wall played an important role in pod filling at the late growth stage.

Using Smart Devices to Measure Intermittent Noise in the Workplace

PubMed Central

Roberts, Benjamin; Neitzel, Richard Lee

2017-01-01

Purpose: To determine the accuracy of smart devices (iPods) to measure intermittent noise and integrate a noise dose in the workplace. Materials and Methods: In experiment 1, four iPods were each paired with a Larson Davis Spark dosimeter and exposed to randomly fluctuating pink noise in a reverberant sound chamber. Descriptive statistics and the mean difference between the iPod and its paired dosimeter were calculated for the 1-s data logged measurements. The calculated time weighted average (TWA) was also compared between the devices. In experiment 2, 15 maintenance workers and 14 office workers wore an iPod and dosimeter during their work-shift for a maximum of five workdays. A mixed effects linear regression model was used to control for repeated measures and to determine the effect of the device type on the projected 8-h TWA. Results: In experiment 1, a total of 315,306 1-s data logged measurements were made. The interquartile range of the mean difference fell within ±2.0 A-weighted decibels (dBA), which is the standard used by the American National Standards Institute to classify a type 2 sound level meter. The mean difference of the calculated TWA was within ±0.5 dBA except for one outlier. In experiment 2, the results of the mixed effects model found that, on average, iPods measured an 8-h TWA 1.7 dBA higher than their paired dosimeters. Conclusion: This study shows that iPods have the ability to make reasonably accurate noise measurements in the workplace, but they are not as accurate as traditional noise dosimeters. PMID:29192614

PodNet, a protein-protein interaction network of the podocyte.

PubMed

Warsow, Gregor; Endlich, Nicole; Schordan, Eric; Schordan, Sandra; Chilukoti, Ravi K; Homuth, Georg; Moeller, Marcus J; Fuellen, Georg; Endlich, Karlhans

2013-07-01

Interactions between proteins crucially determine cellular structure and function. Differential analysis of the interactome may help elucidate molecular mechanisms during disease development; however, this analysis necessitates mapping of expression data on protein-protein interaction networks. These networks do not exist for the podocyte; therefore, we built PodNet, a literature-based mouse podocyte network in Cytoscape format. Using database protein-protein interactions, we expanded PodNet to XPodNet with enhanced connectivity. In order to test the performance of XPodNet in differential interactome analysis, we examined podocyte developmental differentiation and the effect of cell culture. Transcriptomes of podocytes in 10 different states were mapped on XPodNet and analyzed with the Cytoscape plugin ExprEssence, based on the law of mass action. Interactions between slit diaphragm proteins are most significantly upregulated during podocyte development and most significantly downregulated in culture. On the other hand, our analysis revealed that interactions lost during podocyte differentiation are not regained in culture, suggesting a loss rather than a reversal of differentiation for podocytes in culture. Thus, we have developed PodNet as a valuable tool for differential interactome analysis in podocytes, and we have identified established and unexplored regulated interactions in developing and cultured podocytes.

Open-Source Conceptual Sizing Models for the Hyperloop Passenger Pod

NASA Technical Reports Server (NTRS)

Chin, Jeffrey C.; Gray, Justin S.; Jones, Scott M.; Berton, Jeffrey J.

2015-01-01

Hyperloop is a new mode of transportation proposed as an alternative to California's high speed rail project, with the intended benefits of higher performance at lower overall costs. It consists of a passenger pod traveling through a tube under a light vacuum and suspended on air bearings. The pod travels up to transonic speeds resulting in a 35 minute travel time between the intended route from Los Angeles and San Francisco. Of the two variants outlined, the smaller system includes a 1.1 meter tall passenger capsule traveling through a 2.2 meter tube at 700 miles per hour. The passenger pod features water-based heat exchangers as well as an on-board compression system that reduces the aerodynamic drag as it moves through the tube. Although the original proposal looks very promising, it assumes that tube and pod dimensions are independently sizable without fully acknowledging the constraints of the compressor system on the pod geometry. This work focuses on the aerodynamic and thermodynamic interactions between the two largest systems; the tube and the pod. Using open-source toolsets, a new sizing method is developed based on one-dimensional thermodynamic relationships that accounts for the strong interactions between these sub-systems. These additional considerations require a tube nearly twice the size originally considered and limit the maximum pod travel speed to about 620 miles per hour. Although the results indicate that Hyperloop will need to be larger and slightly slower than originally intended, the estimated travel time only increases by approximately five minutes, so the overall performance is not dramatically affected. In addition, the proposed on-board heat exchanger is not an ideal solution to achieve reasonable equilibrium air temperatures within the tube. Removal of this subsystem represents a potential reduction in weight, energy requirements and complexity of the pod. In light of these finding, the core concept still remains a compelling possibility, although additional engineering and economic analyses are markedly necessary before a more complete design can be developed.

Verification of recursive probabilistic integration (RPI) method for fatigue life management using non-destructive inspections

NASA Astrophysics Data System (ADS)

Chen, Tzikang J.; Shiao, Michael

2016-04-01

This paper verified a generic and efficient assessment concept for probabilistic fatigue life management. The concept is developed based on an integration of damage tolerance methodology, simulations methods1, 2, and a probabilistic algorithm RPI (recursive probability integration)3-9 considering maintenance for damage tolerance and risk-based fatigue life management. RPI is an efficient semi-analytical probabilistic method for risk assessment subjected to various uncertainties such as the variability in material properties including crack growth rate, initial flaw size, repair quality, random process modeling of flight loads for failure analysis, and inspection reliability represented by probability of detection (POD). In addition, unlike traditional Monte Carlo simulations (MCS) which requires a rerun of MCS when maintenance plan is changed, RPI can repeatedly use a small set of baseline random crack growth histories excluding maintenance related parameters from a single MCS for various maintenance plans. In order to fully appreciate the RPI method, a verification procedure was performed. In this study, MC simulations in the orders of several hundred billions were conducted for various flight conditions, material properties, and inspection scheduling, POD and repair/replacement strategies. Since the MC simulations are time-consuming methods, the simulations were conducted parallelly on DoD High Performance Computers (HPC) using a specialized random number generator for parallel computing. The study has shown that RPI method is several orders of magnitude more efficient than traditional Monte Carlo simulations.

Hierarchical Bass model: a product diffusion model considering a diversity of sensitivity to fashion

NASA Astrophysics Data System (ADS)

Tashiro, Tohru

2016-11-01

We propose a new product diffusion model including the number of how many adopters or advertisements a non-adopter met until he/she adopts the product, where (non-)adopters mean people (not) possessing it. By this effect not considered in the Bass model, we can depict a diversity of sensitivity to fashion. As an application, we utilize the model to fit the iPod and the iPhone unit sales data, and so the better agreement is obtained than the Bass model for the iPod data. We also present a new method to estimate the number of advertisements in a society from fitting parameters of the Bass model and this new model.

Galerkin Method for Nonlinear Dynamics

NASA Astrophysics Data System (ADS)

Noack, Bernd R.; Schlegel, Michael; Morzynski, Marek; Tadmor, Gilead

A Galerkin method is presented for control-oriented reduced-order models (ROM). This method generalizes linear approaches elaborated by M. Morzyński et al. for the nonlinear Navier-Stokes equation. These ROM are used as plants for control design in the chapters by G. Tadmor et al., S. Siegel, and R. King in this volume. Focus is placed on empirical ROM which compress flow data in the proper orthogonal decomposition (POD). The chapter shall provide a complete description for construction of straight-forward ROM as well as the physical understanding and teste

"This is not a drill": Activation of a student-led influenza vaccination point of dispensing.

PubMed

Adams, Lavonne M; Canclini, Sharon; Tillman, Kelle

2018-04-13

To describe activation of a Point of dispensing (POD) in response to an influenza outbreak, highlighting the use of a student-led model. Faculty, staff, and students of Harris College of Nursing and Health Sciences, Texas Christian University (TCU), as well as those located in its primary building. In response to an August 2017 influenza outbreak, a vaccination clinic was conducted for a target population through POD activation. The larger campus community was served through provision of additional doses by the Texas Christian University Health Center and the annual October student-led vaccination clinic. Eleven additional cases were diagnosed after vaccinations began. One hundred percent of the targeted population was vaccinated (n = 824), with an additional 127 participants vaccinated (others working in the building where POD held also vaccinated). This was the first time POD activation had occurred on campus in response to an outbreak.

Loss of PodJ in Agrobacterium tumefaciens Leads to Ectopic Polar Growth, Branching, and Reduced Cell Division

PubMed Central

Anderson-Furgeson, James C.; Zupan, John R.; Grangeon, Romain

2016-01-01

ABSTRACT Agrobacterium tumefaciens is a rod-shaped Gram-negative bacterium that elongates by unipolar addition of new cell envelope material. Approaching cell division, the growth pole transitions to a nongrowing old pole, and the division site creates new growth poles in sibling cells. The A. tumefaciens homolog of the Caulobacter crescentus polar organizing protein PopZ localizes specifically to growth poles. In contrast, the A. tumefaciens homolog of the C. crescentus polar organelle development protein PodJ localizes to the old pole early in the cell cycle and accumulates at the growth pole as the cell cycle proceeds. FtsA and FtsZ also localize to the growth pole for most of the cell cycle prior to Z-ring formation. To further characterize the function of polar localizing proteins, we created a deletion of A. tumefaciens podJ (podJAt). ΔpodJAt cells display ectopic growth poles (branching), growth poles that fail to transition to an old pole, and elongated cells that fail to divide. In ΔpodJAt cells, A. tumefaciens PopZ-green fluorescent protein (PopZAt-GFP) persists at nontransitioning growth poles postdivision and also localizes to ectopic growth poles, as expected for a growth-pole-specific factor. Even though GFP-PodJAt does not localize to the midcell in the wild type, deletion of podJAt impacts localization, stability, and function of Z-rings as assayed by localization of FtsA-GFP and FtsZ-GFP. Z-ring defects are further evidenced by minicell production. Together, these data indicate that PodJAt is a critical factor for polar growth and that ΔpodJAt cells display a cell division phenotype, likely because the growth pole cannot transition to an old pole. IMPORTANCE How rod-shaped prokaryotes develop and maintain shape is complicated by the fact that at least two distinct species-specific growth modes exist: uniform sidewall insertion of cell envelope material, characterized in model organisms such as Escherichia coli, and unipolar growth, which occurs in several alphaproteobacteria, including Agrobacterium tumefaciens. Essential components for unipolar growth are largely uncharacterized, and the mechanism constraining growth to one pole of a wild-type cell is unknown. Here, we report that the deletion of a polar development gene, podJAt, results in cells exhibiting ectopic polar growth, including multiple growth poles and aberrant localization of cell division and polar growth-associated proteins. These data suggest that PodJAt is a critical factor in normal polar growth and impacts cell division in A. tumefaciens. PMID:27137498

Validation of a White-light 3D Body Volume Scanner to Assess Body Composition.

PubMed

Medina-Inojosa, Jose; Somers, Virend; Jenkins, Sarah; Zundel, Jennifer; Johnson, Lynne; Grimes, Chassidy; Lopez-Jimenez, Francisco

2017-01-01

Estimating body fat content has shown to be a better predictor of adiposity-related cardiovascular risk than the commonly used body mass index (BMI). The white-light 3D body volume index (BVI) scanner is a non-invasive device normally used in the clothing industry to assess body shapes and sizes. We assessed the hypothesis that volume obtained by BVI is comparable to the volume obtained by air displacement plethysmography (Bod-Pod) and thus capable of assessing body fat mass using the bi-compartmental principles of body composition. We compared BVI to Bod-pod, a validated bicompartmental method to assess body fat percent that uses pressure/volume relationships in isothermal conditions to estimate body volume. Volume is then used to calculate body density (BD) applying the formula density=Body Mass/Volume. Body fat mass percentage is then calculated using the Siri formula (4.95/BD - 4.50) × 100. Subjects were undergoing a wellness evaluation. Measurements from both devices were obtained the same day. A prediction model for total Bod-pod volume was developed using linear regression based on 80% of the observations (N=971), as follows: Predicted Bod-pod Volume (L)=9.498+0.805*(BVI volume, L)-0.0411*(Age, years)-3.295*(Male=0, Female=1)+0.0554*(BVI volume, L)*(Male=0, Female=1)+0.0282*(Age, years)*(Male=0, Female=1). Predictions for Bod-pod volume based on the estimated model were then calculated for the remaining 20% (N=243) and compared to the volume measured by the Bod-pod. Mean age among the 971 individuals was 41.5 ± 12.9 years, 39.4% were men, weight 81.6 ± 20.9 kg, BMI was 27.8 ± 6.3kg/m 2 . Average difference between volume measured by Bod-pod- predicted volume by BVI was 0.0 L, median: -0.4 L, IQR: -1.8 L to 1.5 L, R2=0.9845. Average difference between body fat measured-predicted was-1%, median: -2.7%, IQR: -13.2 to 9.9, R2=0.9236. Volume and BFM can be estimated by using volume measurements obtained by a white- light 3D body scanner and the prediction model developed in this study.

Thermospheric density and wind retrieval from Swarm observations

NASA Astrophysics Data System (ADS)

Visser, Pieter; Doornbos, Eelco; van den IJssel, Jose; Teixeira da Encarnação, João

2013-11-01

The three-satellite ESA Swarm mission aims at mapping the Earth's global geomagnetic field at unprecedented spatial and temporal resolution and precision. Swarm also aims at observing thermospheric density and possibly horizontal winds. Precise orbit determination (POD) and Thermospheric Density and Wind (TDW) chains form part of the Swarm Constellation and Application Facility (SCARF), which will provide the so-called Level 2 products. The POD and TDW chains generate the orbit, accelerometer calibration, and thermospheric density and wind Level 2 products. The POD and TDW chains have been tested with data from the CHAMP and GRACE missions, indicating that a 3D orbit precision of about 10 cm can be reached. In addition, POD allows to determine daily accelerometer bias and scale factor values with a precision of around 10-15 nm/s2 and 0.01-0.02, respectively, for the flight direction. With these accelerometer calibration parameter values, derived thermospheric density is consistent at the 9-11% level (standard deviation) with values predicted by models (taking into account that model values are 20-30% higher). The retrieval of crosswinds forms part of the processing chain, but will be challenging. The Swarm observations will be used for further developing and improving density and wind retrieval algorithms.

Fast detection of peroxidase (POD) activity in tomato leaves which infected with Botrytis cinerea using hyperspectral imaging

NASA Astrophysics Data System (ADS)

Kong, Wenwen; Liu, Fei; Zhang, Chu; Bao, Yidan; Yu, Jiajia; He, Yong

2014-01-01

Tomatoes are cultivated around the world and gray mold is one of its most prominent and destructive diseases. An early disease detection method can decrease losses caused by plant diseases and prevent the spread of diseases. The activity of peroxidase (POD) is very important indicator of disease stress for plants. The objective of this study is to examine the possibility of fast detection of POD activity in tomato leaves which infected with Botrytis cinerea using hyperspectral imaging data. Five pre-treatment methods were investigated. Genetic algorithm-partial least squares (GA-PLS) was applied to select optimal wavelengths. A new fast learning neural algorithm named extreme learning machine (ELM) was employed as multivariate analytical tool in this study. 21 optimal wavelengths were selected by GA-PLS and used as inputs of three calibration models. The optimal prediction result was achieved by ELM model with selected wavelengths, and the r and RMSEP in validation were 0.8647 and 465.9880 respectively. The results indicated that hyperspectral imaging could be considered as a valuable tool for POD activity prediction. The selected wavelengths could be potential resources for instrument development.

Teaching students with developmental disabilities to operate an iPod Touch(®) to listen to music.

PubMed

Kagohara, Debora M; Sigafoos, Jeff; Achmadi, Donna; van der Meer, Larah; O'Reilly, Mark F; Lancioni, Giulio E

2011-01-01

We evaluated an intervention procedure for teaching three students with developmental disabilities to independently operate a portable multimedia device (i.e., an iPod Touch(®)) to listen to music. The intervention procedure included the use of video modeling, which was presented on the same iPod Touch(®) that the students were taught to operate to listen to music. Four phases (i.e., baseline, intervention, fading, and follow-up) were arranged in accordance with a delayed multiple-probe across participants design. During baseline, the students performed from 25 to 62.5% of the task analyzed steps correctly. With intervention, all three students correctly performed 80-100% of the steps and maintained this level of performance when video modeling was removed and during follow-up. The findings suggest that the video modeling procedure was effective for teaching the students to independently operate a portable multimedia device to access age-appropriate leisure content. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effect of the lectin of Bauhinia variegata and its recombinant isoform on surgically induced skin wounds in a murine model.

PubMed

Neto, Luiz Gonzaga do Nascimento; Pinto, Luciano da Silva; Bastos, Rafaela Mesquita; Evaristo, Francisco Flávio Vasconcelos; Vasconcelos, Mayron Alves de; Carneiro, Victor Alves; Arruda, Francisco Vassiliepe Sousa; Porto, Ana Lúcia Figueiredo; Leal, Rodrigo Bainy; Júnior, Valdemiro Amaro da Silva; Cavada, Benildo Sousa; Teixeira, Edson Holanda

2011-11-07

Lectins are a structurally heterogeneous group of highly specific carbohydrate-binding proteins. Due to their great biotechnological potential, lectins are widely used in biomedical research. The purpose of the present study was to evaluate the healing potential of the lectin of Bauhinia variegata (nBVL) and its recombinant isoform (rBVL-1). Following surgical creation of dorsal skin wounds, seven groups of mice were submitted to topical treatment for 12 days with lectin, D-galactose, BSA and saline. The animals were anesthetized and euthanized on POD 2, 7 and 12 in order to evaluate the healing potential of each treatment. The parameters considered included wound size, contraction rate, epithelialization rate and histopathological findings. Wound closure was fastest in animals treated with rBVL-1 (POD 7). nBVL was more effective than the controls. All skin layers were reconstructed and keratin deposition increased. Our findings indicate that the lectin of Bauhinia variegata possesses pro-healing properties and may be employed in the treatment of acute skin wounds.

Modeling the X-Ray Process, and X-Ray Flaw Size Parameter for POD Studies

NASA Technical Reports Server (NTRS)

Khoshti, Ajay

2014-01-01

Nondestructive evaluation (NDE) method reliability can be determined by a statistical flaw detection study called probability of detection (POD) study. In many instances the NDE flaw detectability is given as a flaw size such as crack length. The flaw is either a crack or behaving like a crack in terms of affecting the structural integrity of the material. An alternate approach is to use a more complex flaw size parameter. The X-ray flaw size parameter, given here, takes into account many setup and geometric factors. The flaw size parameter relates to X-ray image contrast and is intended to have a monotonic correlation with the POD. Some factors such as set-up parameters including X-ray energy, exposure, detector sensitivity, and material type that are not accounted for in the flaw size parameter may be accounted for in the technique calibration and controlled to meet certain quality requirements. The proposed flaw size parameter and the computer application described here give an alternate approach to conduct the POD studies. Results of the POD study can be applied to reliably detect small flaws through better assessment of effect of interaction between various geometric parameters on the flaw detectability. Moreover, a contrast simulation algorithm for a simple part-source-detector geometry using calibration data is also provided for the POD estimation.

Modeling the X-ray Process, and X-ray Flaw Size Parameter for POD Studies

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2014-01-01

Nondestructive evaluation (NDE) method reliability can be determined by a statistical flaw detection study called probability of detection (POD) study. In many instances, the NDE flaw detectability is given as a flaw size such as crack length. The flaw is either a crack or behaving like a crack in terms of affecting the structural integrity of the material. An alternate approach is to use a more complex flaw size parameter. The X-ray flaw size parameter, given here, takes into account many setup and geometric factors. The flaw size parameter relates to X-ray image contrast and is intended to have a monotonic correlation with the POD. Some factors such as set-up parameters, including X-ray energy, exposure, detector sensitivity, and material type that are not accounted for in the flaw size parameter may be accounted for in the technique calibration and controlled to meet certain quality requirements. The proposed flaw size parameter and the computer application described here give an alternate approach to conduct the POD studies. Results of the POD study can be applied to reliably detect small flaws through better assessment of effect of interaction between various geometric parameters on the flaw detectability. Moreover, a contrast simulation algorithm for a simple part-source-detector geometry using calibration data is also provided for the POD estimation.

Protein C activity and postoperative metabolic liver function after liver transplantation.

PubMed

Wagener, G; Diaz, G; Guarrera, J V; Minhaz, M; Renz, J F; Sladen, R N

2012-06-01

Protein C is a natural thrombin antagonist produced by hepatocytes. Its levels are low in liver failure and predispose patients to increased risk for thrombosis. Little is known about the relationship between protein C activity and hepatic function after orthotopic liver transplantation (OLT). We measured protein C activity of 41 patients undergoing liver transplantation by the Staclot method (normal range, 70%-130%) preoperatively and then daily on postoperative days (POD) 0-5. The mean protein C activity was low before OLT (34.3 ± 4.3%) and inversely correlated with the preoperative Model for End-Stage Liver Disease score (Spearman's r = -0.643; P < .0001). Mean activity increased significantly on POD 1 (58.9 ± 4.5%), and remained above preoperative levels through POD 5. Ten patients developed metabolic liver dysfunction defined by a serum total bilirubin >5 mg/dL on POD 7. These patients had significantly lower protein C activity from POD 3 (47.2 ± 9.6% vs 75.9 ± 5.8%; P = .01) to POD 5. Preoperative protein C activity correlated inversely with the severity of liver failure as indicated by preoperative MELD score. Protein C activity recovered rapidly in patients with good allograft function but remained significantly lower in patients who had limited metabolic function as evidenced by increased total bilirubin levels. Copyright © 2012 Elsevier Inc. All rights reserved.

A Hybrid Optimization Framework with POD-based Order Reduction and Design-Space Evolution Scheme

NASA Astrophysics Data System (ADS)

Ghoman, Satyajit S.

The main objective of this research is to develop an innovative multi-fidelity multi-disciplinary design, analysis and optimization suite that integrates certain solution generation codes and newly developed innovative tools to improve the overall optimization process. The research performed herein is divided into two parts: (1) the development of an MDAO framework by integration of variable fidelity physics-based computational codes, and (2) enhancements to such a framework by incorporating innovative features extending its robustness. The first part of this dissertation describes the development of a conceptual Multi-Fidelity Multi-Strategy and Multi-Disciplinary Design Optimization Environment (M3 DOE), in context of aircraft wing optimization. M 3 DOE provides the user a capability to optimize configurations with a choice of (i) the level of fidelity desired, (ii) the use of a single-step or multi-step optimization strategy, and (iii) combination of a series of structural and aerodynamic analyses. The modularity of M3 DOE allows it to be a part of other inclusive optimization frameworks. The M 3 DOE is demonstrated within the context of shape and sizing optimization of the wing of a Generic Business Jet aircraft. Two different optimization objectives, viz. dry weight minimization, and cruise range maximization are studied by conducting one low-fidelity and two high-fidelity optimization runs to demonstrate the application scope of M3 DOE. The second part of this dissertation describes the development of an innovative hybrid optimization framework that extends the robustness of M 3 DOE by employing a proper orthogonal decomposition-based design-space order reduction scheme combined with the evolutionary algorithm technique. The POD method of extracting dominant modes from an ensemble of candidate configurations is used for the design-space order reduction. The snapshot of candidate population is updated iteratively using evolutionary algorithm technique of fitness-driven retention. This strategy capitalizes on the advantages of evolutionary algorithm as well as POD-based reduced order modeling, while overcoming the shortcomings inherent with these techniques. When linked with M3 DOE, this strategy offers a computationally efficient methodology for problems with high level of complexity and a challenging design-space. This newly developed framework is demonstrated for its robustness on a nonconventional supersonic tailless air vehicle wing shape optimization problem.

Ni(II) biosorption by Cassia fistula (Golden Shower) biomass.

PubMed

Hanif, Muhammad Asif; Nadeem, Raziya; Bhatti, Haq Nawaz; Ahmad, Najum Rashid; Ansari, Tariq Mehmood

2007-01-10

Cassia fistula is a fast-growing, medium-sized, deciduous tree which is now widely cultivated worldwide as an ornamental tree for its beautiful showy yellow flowers. Methods are required to reuse fallen leaves, branches, stem bark and pods when they start getting all over lawn. This investigation studies the use of these non-useful parts of C. fistula as naturally occurring biosorbent for the batch removal of Ni(II) in a well stirred system under different experimental conditions. The data showed that the maximum pH (pHmax) for efficient sorption of Ni(II) was 6 at which evaluated biosorbent dosage, biosorbent particle size, initial concentrations of Ni(II) and sorption time were 0.1 g/100 mL, <0.255 mm, up to 200 mg/L and 720 min, respectively. The experimental results were analyzed in terms of Langmuir and Freundlich isotherms. The Langmuir isotherm model fitted well to data of Ni(II) biosorption by C. fistula biomass as compared to the model of Freundlich. The kinetic studies showed that the sorption rates could be described better by a second order expression than by a more commonly applied Lagergren equation. The magnitude of the Gibbs free energy values indicates spontaneous nature of the sorption process. The sorption ability of C. fistula biomass for Ni(II) removal tends to be in the order: leaves

Laundry pod and non-pod detergent related emergency department visits occurring in children in the USA.

PubMed

Swain, Thomas A; McGwin, Gerald; Griffin, Russell

2016-12-01

Previous studies have reported that children are at risk of severe injuries from exposure to laundry detergent pods. For the first time, this study sought to compare demographic and exposure characteristics and risk among children exposed to pod and non-pod laundry detergents presenting to emergency departments (EDs). Data from the National Electronic Injury Surveillance System (NEISS) from 2012-2014 were used. All observations with injuries involving laundry detergent (NEISS code 0949) were included in this study. The χ 2 test was used for bivariate analysis and logistic regression was used to determine the OR and 95% CI of hospitalisation for pod related versus non-pod laundry detergent exposures. From 2012-2014, there were an estimated 26 062 non-pod and 9814 pod laundry detergent related exposures among those aged 18 years and younger. For pod detergent, children aged 0-5 years had the most injuries. Poisoning (71.3%) was the most common diagnosis for pod detergent while contact dermatitis (72.2%) was most common for non-pod detergent. Hospitalisation occurred in 12.5% of pod detergent cases and just 3.0% of non-pod cases. Compared with non-pod detergent, those exposed to pod detergent were 4 times as likely to be hospitalised (OR 4.02; 95% CI 1.96 to 8.24). A greater effort should be made to appropriately educate the public about the dangers of laundry detergents, specifically pods, so a safe home environment can be established. While new regulations such as childproof containers, opaque packaging, and less appealing and colourful pods could reduce the number of pod related ED visits for children, caregivers should store detergents, along with other chemicals, in a secure location where children cannot easily access them. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Assessing of the contributions of pod photosynthesis to carbon acquisition of seed in alfalfa (Medicago sativa L.).

PubMed

Zhang, Wenxu; Mao, Peisheng; Li, Yuan; Wang, Mingya; Xia, Fangshan; Wang, Hui

2017-02-07

The distribution of carbon from a branch setting pod in alfalfa was investigated during the seed development of seeds to determine the relative contribution of pod and leaf photoassimilates to the total C balance and to investigate the partitioning of these photoassimilates to other plant organs. A 13 Clabeling procedure was used to label C photoassimilates of pods and leaves in alfalfa, and the Δ 13 C values of a pod, leaves, a section of stem and roots were measured during seed development on day 10, 15, 20 and 25 after labeling of the pod. The results showed that the alfalfa pod had photosynthetic capacity early in the development of seeds, and that pod photosynthesis could provide carbon to alfalfa organs including seeds, pods, leaves, stems and roots, in addition to leaf photosynthesis. Photosynthesis in the pod affected the total C balance of the alfalfa branch with the redistribution of a portion of pod assimilates to other plant organs. The assimilated 13 C of the pod was used for the growth requirements of plant seeds and pods. The requirements for assimilated C came primarily from the young pod in early seed development, with later requirements provided primarily from the leaf.

Partly transparent young legume pods: Do they mimic caterpillars for defense and simultaneously enable better photosynthesis?

PubMed Central

Lev-Yadun, Simcha

2015-01-01

Being partly or fully transparent as a defense from predation is mostly known in various groups of aquatic animals and various terrestrial arthropods. Plants, being photosynthetic and having cell walls made of various polymers, cannot be wholly transparent. In spite of these inherent limitations, some succulent plant species of arid zones have partially transparent “windows” in order to perform photosynthesis in their below-ground leaves, as defense from herbivores as well as for protection from harsh environmental conditions. Similarly, transparent “windows” or even wholly transparent leaves are found in certain thick or thin, above-ground organs irrespective of aridity. The young pods of various wild annual Mediterranean legume species belonging to the genera Lathyrus, Pisum and Vicia are partly transparent and may therefore look like caterpillars when viewed with back illumination. I propose that this character serves 2 functions: (1) being a type of defensive caterpillar mimicry that may reduce their consumption by various herbivores in that very sensitive stage, and (2) simultaneously allowing better photosynthesis in the rapidly growing seeds and pods. Unlike animals that are transparent for either defensive or aggressive crypsis, in the case of young legume pods it allows them to visually mimic caterpillars for defense. PMID:26633565

Deciphering Transcriptional Programming during Pod and Seed Development Using RNA-Seq in Pigeonpea (Cajanus cajan).

PubMed

Pazhamala, Lekha T; Agarwal, Gaurav; Bajaj, Prasad; Kumar, Vinay; Kulshreshtha, Akanksha; Saxena, Rachit K; Varshney, Rajeev K

2016-01-01

Seed development is an important event in plant life cycle that has interested humankind since ages, especially in crops of economic importance. Pigeonpea is an important grain legume of the semi-arid tropics, used mainly for its protein rich seeds. In order to understand the transcriptional programming during the pod and seed development, RNA-seq data was generated from embryo sac from the day of anthesis (0 DAA), seed and pod wall (5, 10, 20 and 30 DAA) of pigeonpea variety "Asha" (ICPL 87119) using Illumina HiSeq 2500. About 684 million sequencing reads have been generated from nine samples, which resulted in the identification of 27,441 expressed genes after sequence analysis. These genes have been studied for their differentially expression, co-expression, temporal and spatial gene expression. We have also used the RNA-seq data to identify important seed-specific transcription factors, biological processes and associated pathways during seed development process in pigeonpea. The comprehensive gene expression study from flowering to mature pod development in pigeonpea would be crucial in identifying candidate genes involved in seed traits directly or indirectly related to yield and quality. The dataset will serve as an important resource for gene discovery and deciphering the molecular mechanisms underlying various seed related traits.

Deciphering Transcriptional Programming during Pod and Seed Development Using RNA-Seq in Pigeonpea (Cajanus cajan)

PubMed Central

Pazhamala, Lekha T.; Agarwal, Gaurav; Bajaj, Prasad; Kumar, Vinay; Kulshreshtha, Akanksha; Saxena, Rachit K.; Varshney, Rajeev K.

2016-01-01

Seed development is an important event in plant life cycle that has interested humankind since ages, especially in crops of economic importance. Pigeonpea is an important grain legume of the semi-arid tropics, used mainly for its protein rich seeds. In order to understand the transcriptional programming during the pod and seed development, RNA-seq data was generated from embryo sac from the day of anthesis (0 DAA), seed and pod wall (5, 10, 20 and 30 DAA) of pigeonpea variety “Asha” (ICPL 87119) using Illumina HiSeq 2500. About 684 million sequencing reads have been generated from nine samples, which resulted in the identification of 27,441 expressed genes after sequence analysis. These genes have been studied for their differentially expression, co-expression, temporal and spatial gene expression. We have also used the RNA-seq data to identify important seed-specific transcription factors, biological processes and associated pathways during seed development process in pigeonpea. The comprehensive gene expression study from flowering to mature pod development in pigeonpea would be crucial in identifying candidate genes involved in seed traits directly or indirectly related to yield and quality. The dataset will serve as an important resource for gene discovery and deciphering the molecular mechanisms underlying various seed related traits. PMID:27760186

Postoperative Delirium in Severely Burned Patients Undergoing Early Escharotomy: Incidence, Risk Factors, and Outcomes.

PubMed

Guo, Zhenggang; Liu, Jiabin; Li, Jia; Wang, Xiaoyan; Guo, Hui; Ma, Panpan; Su, Xiaojun; Li, Ping

The aim of this study is to investigate the incidence, related risk factors, and outcomes of postoperative delirium (POD) in severely burned patients undergoing early escharotomy. This study included 385 severely burned patients (injured <1 week; TBSA, 31-50% or 11-20%; American Society of Anesthesiologists physical status, II-IV) aged 18 to 65 years, who underwent early escharotomy between October 2014 and December 2015, and were selected by cluster sampling. The authors excluded patients with preoperative delirium or diagnosed dementia, depression, or cognitive dysfunction. Preoperative, perioperative, intraoperative, and postoperative information, such as demographic characteristics, vital signs, and health history were collected. The Confusion Assessment Method was used once daily for 5 days after surgery to identify POD. Stepwise binary logistic regression analysis was used to identify the risk factors for POD, t-tests, and χ tests were performed to compare the outcomes of patients with and without the condition. Fifty-six (14.55%) of the patients in the sample were diagnosed with POD. Stepwise binary logistic regression showed that the significant risk factors for POD in severely burned patients undergoing early escharotomy were advanced age (>50 years old), a history of alcohol consumption (>3/week), high American Society of Anesthesiologists classification (III or IV), time between injury and surgery (>2 days), number of previous escharotomies (>2), combined intravenous and inhalation anesthesia, no bispectral index applied, long duration surgery (>180 min), and intraoperative hypotension (mean arterial pressure < 55 mm Hg). On the basis of the different odds ratios, the authors established a weighted model. When the score of a patient's weighted odds ratios is more than 6, the incidence of POD increased significantly (P < .05). When the score of a patient's weighted odds ratios is more than 6, the incidence of POD increased significantly (P < .05). Further, POD was associated with more postoperative complications, including hepatic and renal function impairment and hypernatremia, as well as prolonged hospitalization, increased medical costs, and higher mortality.

Antibacterial Activity of the Alkaloid-Enriched Extract from Prosopis juliflora Pods and Its Influence on in Vitro Ruminal Digestion

PubMed Central

dos Santos, Edilene T.; Pereira, Mara Lúcia A.; da Silva, Camilla Flávia P.G.; Souza-Neta, Lourdes C.; Geris, Regina; Martins, Dirceu; Santana, Antônio Euzébio G.; Barbosa, Luiz Cláudio A.; Silva, Herymá Giovane O.; Freitas, Giovana C.; Figueiredo, Mauro P.; de Oliveira, Fernando F.; Batista, Ronan

2013-01-01

The purpose of this study was to assess the in vitro antimicrobial activity of alkaloid-enriched extracts from Prosopis juliflora (Fabaceae) pods in order to evaluate them as feed additives for ruminants. As only the basic chloroformic extract (BCE), whose main constituents were juliprosopine (juliflorine), prosoflorine and juliprosine, showed Gram-positive antibacterial activity against Micrococcus luteus (MIC = 25 μg/mL), Staphylococcus aureus (MIC = 50 μg/mL) and Streptococcus mutans (MIC = 50 μg/mL), its influence on ruminal digestion was evaluated using a semi-automated in vitro gas production technique, with monensin as the positive control. Results showed that BCE has decreased gas production as efficiently as monensin after 36 h of fermentation, revealing its positive influence on gas production during ruminal digestion. Since P. juliflora is a very affordable plant, this study points out this alkaloid enriched extract from the pods of Prosopis juliflora as a potential feed additive to decrease gas production during ruminal digestion. PMID:23595000

Driving error and anxiety related to iPod mp3 player use in a simulated driving experience.

PubMed

Harvey, Ashley R; Carden, Randy L

2009-08-01

Driver distraction due to cellular phone usage has repeatedly been shown to increase the risk of vehicular accidents; however, the literature regarding the use of other personal electronic devices while driving is relatively sparse. It was hypothesized that the usage of an mp3 player would result in an increase in not only driving error while operating a driving simulator, but driver anxiety scores as well. It was also hypothesized that anxiety scores would be positively related to driving errors when using an mp3 player. 32 participants drove through a set course in a driving simulator twice, once with and once without an iPod mp3 player, with the order counterbalanced. Number of driving errors per course, such as leaving the road, impacts with stationary objects, loss of vehicular control, etc., and anxiety were significantly higher when an iPod was in use. Anxiety scores were unrelated to number of driving errors.

Xenon for the prevention of postoperative delirium in cardiac surgery: study protocol for a randomized controlled clinical trial.

PubMed

Al Tmimi, Layth; Van de Velde, Marc; Herijgers, Paul; Meyns, Bart; Meyfroidt, Geert; Milisen, Koen; Fieuws, Steffen; Coburn, Mark; Poesen, Koen; Rex, Steffen

2015-10-09

Postoperative delirium (POD) is a manifestation of acute postoperative brain dysfunction that is frequently observed after cardiac surgery. POD is associated with short-term complications such as an increase in mortality, morbidity, costs and length of stay, but can also have long-term sequelae, including persistent cognitive deficits, loss of independence, and increased mortality for up to 2 years. The noble gas xenon has been demonstrated in various models of neuronal injury to exhibit remarkable neuroprotective properties. We therefore hypothesize that xenon anesthesia reduces the incidence of POD in elderly patients undergoing cardiac surgery with the use of cardiopulmonary bypass. One hundred and ninety patients, older than 65 years, and scheduled for elective cardiac surgery, will be enrolled in this prospective, randomized, controlled trial. Patients will be randomized to receive general anesthesia with either xenon or sevoflurane. Primary outcome parameter will be the incidence of POD in the first 5 postoperative days. The occurrence of POD will be assessed by trained research personnel, blinded to study group, with the validated 3-minute Diagnostic Confusion Assessment Method (3D-CAM) (on the intensive care unit in its version specifically adapted for the ICU), in addition to chart review and the results of delirium screening tools that will be performed by the bedside nurses). Secondary outcome parameters include duration and severity of POD, and postoperative cognitive function as assessed with the Mini-Mental State Examination. Older patients undergoing cardiac surgery are at particular risk to develop POD. Xenon provides remarkable hemodynamic stability and has been suggested in preclinical studies to exhibit neuroprotective properties. The present trial will assess whether the promising profile of xenon can be translated into a better outcome in the geriatric population. EudraCT Identifier: 2014-005370-11 (13 May 2015).

Transcriptome Analysis of Calcium- and Hormone-Related Gene Expressions during Different Stages of Peanut Pod Development

PubMed Central

Li, Yan; Meng, Jingjing; Yang, Sha; Guo, Feng; Zhang, Jialei; Geng, Yun; Cui, Li; Wan, Shubo; Li, Xinguo

2017-01-01

Peanut is one of the calciphilous plants. Calcium serves as a ubiquitous central hub in a large number of signaling pathways. In the field, free calcium ion (Ca2+)-deficient soil can result in unfilled pods. Four pod stages were analyzed to determine the relationship between Ca2+ excretion and pod development. Peanut shells showed Ca2+ excretion at all four stages; however, both the embryo of Stage 4 (S4) and the red skin of Stage 3 (S3) showed Ca2+ absorbance. These results showed that embryo and red skin of peanut need Ca2+ during development. In order to survey the relationship among calcium, hormone and seed development from gene perspective, we further analyzed the seed transcriptome at Stage 2 (S2), S3, and S4. About 70 million high quality clean reads were generated, which were assembled into 58,147 unigenes. By comparing these three stages, total 4,457 differentially expressed genes were identified. In these genes, 53 Ca2+ related genes, 40 auxin related genes, 15 gibberellin genes, 20 ethylene related genes, 2 abscisic acid related genes, and 7 cytokinin related genes were identified. Additionally, a part of them were validated by qRT-PCR. Most of their expressions changed during the pod development. Since some reports showed that Ca2+ signal transduction pathway is involved in hormone regulation pathway, these results implied that peanut seed development might be regulated by the collaboration of Ca2+ signal transduction pathway and hormone regulation pathway. PMID:28769950

Methods for simulation-based analysis of fluid-structure interaction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barone, Matthew Franklin; Payne, Jeffrey L.

2005-10-01

Methods for analysis of fluid-structure interaction using high fidelity simulations are critically reviewed. First, a literature review of modern numerical techniques for simulation of aeroelastic phenomena is presented. The review focuses on methods contained within the arbitrary Lagrangian-Eulerian (ALE) framework for coupling computational fluid dynamics codes to computational structural mechanics codes. The review treats mesh movement algorithms, the role of the geometric conservation law, time advancement schemes, wetted surface interface strategies, and some representative applications. The complexity and computational expense of coupled Navier-Stokes/structural dynamics simulations points to the need for reduced order modeling to facilitate parametric analysis. The proper orthogonalmore » decomposition (POD)/Galerkin projection approach for building a reduced order model (ROM) is presented, along with ideas for extension of the methodology to allow construction of ROMs based on data generated from ALE simulations.« less

Effects of light quality on pod elongation in soybean (Glycine max (L.) Merr.) and cowpea (Vigna unguiculata (L.) Walp.).

PubMed

Tanaka, Seiya; Ario, Nobuyuki; Nakagawa, Andressa Camila Seiko; Tomita, Yuki; Murayama, Naoki; Taniguchi, Takatoshi; Hamaoka, Norimitsu; Iwaya-Inoue, Mari; Ishibashi, Yushi

2017-06-03

Soybean pods are located at the nodes, where they are in the shadow, whereas cowpea pods are located outside of the leaves and are exposed to sunlight. To compare the effects of light quality on pod growth in soybean and cowpea, we measured the length of pods treated with white, blue, red or far-red light. In both species, pods elongated faster during the dark period than during the light period in all light treatments except red light treatment in cowpea. Red light significantly suppressed pod elongation in soybean during the dark and light periods. On the other hand, the elongation of cowpea pods treated with red light markedly promoted during the light period. These results suggested that the difference in the pod set sites between soybean and cowpea might account for the difference in their red light responses for pod growth.

Low-dimensional and Data Fusion Techniques Applied to a Rectangular Supersonic Multi-stream Jet

NASA Astrophysics Data System (ADS)

Berry, Matthew; Stack, Cory; Magstadt, Andrew; Ali, Mohd; Gaitonde, Datta; Glauser, Mark

2017-11-01

Low-dimensional models of experimental and simulation data for a complex supersonic jet were fused to reconstruct time-dependent proper orthogonal decomposition (POD) coefficients. The jet consists of a multi-stream rectangular single expansion ramp nozzle, containing a core stream operating at Mj , 1 = 1.6 , and bypass stream at Mj , 3 = 1.0 with an underlying deck. POD was applied to schlieren and PIV data to acquire the spatial basis functions. These eigenfunctions were projected onto their corresponding time-dependent large eddy simulation (LES) fields to reconstruct the temporal POD coefficients. This reconstruction was able to resolve spectral peaks that were previously aliased due to the slower sampling rates of the experiments. Additionally, dynamic mode decomposition (DMD) was applied to the experimental and LES datasets, and the spatio-temporal characteristics were compared to POD. The authors would like to acknowledge AFOSR, program manager Dr. Doug Smith, for funding this research, Grant No. FA9550-15-1-0435.

Control of a HexaPOD treatment couch for robot-assisted radiotherapy.

PubMed

Hermann, Christian; Ma, Lei; Wilbert, Jürgen; Baier, Kurt; Schilling, Klaus

2012-10-01

Moving tumors, for example in the vicinity of the lungs, pose a challenging problem in radiotherapy, as healthy tissue should not be irradiated. Apart from gating approaches, one standard method is to irradiate the complete volume within which a tumor moves plus a safety margin containing a considerable volume of healthy tissue. This work deals with a system for tumor motion compensation using the HexaPOD® robotic treatment couch (Medical Intelligence GmbH, Schwabmünchen, Germany). The HexaPOD, carrying the patient during treatment, is instructed to perform translational movements such that the tumor motion, from the beams-eye view of the linear accelerator, is eliminated. The dynamics of the HexaPOD are characterized by time delays, saturations, and other non-linearities that make the design of control a challenging task. The focus of this work lies on two control methods for the HexaPOD that can be used for reference tracking. The first method uses a model predictive controller based on a model gained through system identification methods, and the second method uses a position control scheme useful for reference tracking. We compared the tracking performance of both methods in various experiments with real hardware using ideal reference trajectories, prerecorded patient trajectories, and human volunteers whose breathing motion was compensated by the system.

Mode Analyses of Gyrokinetic Simulations of Plasma Microturbulence

NASA Astrophysics Data System (ADS)

Hatch, David R.

This thesis presents analysis of the excitation and role of damped modes in gyrokinetic simulations of plasma microturbulence. In order to address this question, mode decompositions are used to analyze gyrokinetic simulation data. A mode decomposition can be constructed by projecting a nonlinearly evolved gyrokinetic distribution function onto a set of linear eigenmodes, or alternatively by constructing a proper orthogonal decomposition of the distribution function. POD decompositions are used to examine the role of damped modes in saturating ion temperature gradient driven turbulence. In order to identify the contribution of different modes to the energy sources and sinks, numerical diagnostics for a gyrokinetic energy quantity were developed for the GENE code. The use of these energy diagnostics in conjunction with POD mode decompositions demonstrates that ITG turbulence saturates largely through dissipation by damped modes at the same perpendicular spatial scales as those of the driving instabilities. This defines a picture of turbulent saturation that is very different from both traditional hydrodynamic scenarios and also many common theories for the saturation of plasma turbulence. POD mode decompositions are also used to examine the role of subdominant modes in causing magnetic stochasticity in electromagnetic gyrokinetic simulations. It is shown that the magnetic stochasticity, which appears to be ubiquitous in electromagnetic microturbulence, is caused largely by subdominant modes with tearing parity. The application of higher-order singular value decomposition (HOSVD) to the full distribution function from gyrokinetic simulations is presented. This is an effort to demonstrate the ability to characterize and extract insight from a very large, complex, and high-dimensional data-set - the 5-D (plus time) gyrokinetic distribution function.

Evaluation results of a new EUV reticle pod based on SEMI E152

NASA Astrophysics Data System (ADS)

Ota, Kazuya; Yonekawa, Masami; Taguchi, Takao; Suga, Osamu

2010-04-01

To protect the reticle during shipping, storage and tool handling, various reticle pod concepts have been proposed and evaluated in the last 10 years. MIRAI-Selete has been developing EUV reticle handling technology and evaluating EUV reticle pods designed using "Dual Pod Concept" for four years. The concept was jointly proposed by Canon and Nikon at the EUV mask technology and standards workshop at Miyazaki in November 2004; a mask is doubly protected by an inner pod and an outer pod and the mask is carried into an exposure tool with the inner pod. Canon, Nikon and Entegris have started collaboration in 2005 and developed three types of EUV pod prototypes, alpha, beta and gamma. The gamma pods were evaluated by MIRAI-Selete and the superiority of the dual pod concept has been verified with many experimental data on shipping, storage and tool handling. The dual pod concept was standardized as SEMI E152-0709 "Mechanical Specification of EUV Pods for 150mm EUVL Reticles" in 2009. Canon, Nikon and Entegris have developed a new pod design compatible with SEMI E152; it has a Type A inner baseplate for uses with EUV exposure tools. The baseplate has two alignment windows, a window for a data matrix symbol and five pockets as the front edge grip exclusion volumes. In addition to the new features, there are some differences between the new SEMI compliant pod design and the former design "CNE-gamma", e.g. the material of the inner cover was changed to metal to reduce outgassing rate and the gap between the reticle and the side supports were widened to satisfy a requirement of the standard. MIRAI-Selete has evaluated the particle protective capability of the new SEMI compliant pods "cnPod" during shipping, storage and tool handling in vacuum and found the "cnPod" has the excellent particle protective capability and the dual pod concept can be used not only for EUVL pilot line but also for EUVL high volume manufacturing.

Cell wall-bound cationic and anionic class III isoperoxidases of pea root: biochemical characterization and function in root growth.

PubMed

Kukavica, Biljana M; Veljovicc-Jovanovicc, Sonja D; Menckhoff, Ljiljana; Lüthje, Sabine

2012-07-01

Cell wall isolated from pea roots was used to separate and characterize two fractions possessing class III peroxidase activity: (i) ionically bound proteins and (ii) covalently bound proteins. Modified SDS-PAGE separated peroxidase isoforms by their apparent molecular weights: four bands of 56, 46, 44, and 41kDa were found in the ionically bound fraction (iPOD) and one band (70kDa) was resolved after treatment of the cell wall with cellulase and pectinase (cPOD). Isoelectric focusing (IEF) patterns for iPODs and cPODs were significantly different: five iPODs with highly cationic pI (9.5-9.2) were detected, whereas the nine cPODs were anionic with pI values between pH 3.7 and 5. iPODs and cPODs showed rather specific substrate affinity and different sensitivity to inhibitors, heat, and deglycosylation treatments. Peroxidase and oxidase activities and their IEF patterns for both fractions were determined in different zones along the root and in roots of different ages. New iPODs with pI 9.34 and 9.5 were induced with root growth, while the activity of cPODs was more related to the formation of the cell wall in non-elongating tissue. Treatment with auxin that inhibits root growth led to suppression of iPOD and induction of cPOD. A similar effect was obtained with the widely used elicitor, chitosan, which also induced cPODs with pI 5.3 and 5.7, which may be specifically related to pathogen defence. The differences reported here between biochemical properties of cPOD and iPOD and their differential induction during development and under specific treatments implicate that they are involved in specific and different physiological processes.

Protective effects and mechanisms of curcumin on podophyllotoxin toxicity in vitro and in vivo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Juan; Dai, Cai-Xia; Sun, Hua

2012-12-01

Podophyllotoxin (POD) is a naturally occurring lignan with pronounced antineoplastic and antiviral properties. POD binds to tubulin and prevents the formation of mitotic spindle. Although cases of overdose or accidental ingestion are quite often, no specific therapy is currently available to treat the POD intoxication. In the current investigation, the protective effects and mechanisms of curcumin (CUR) on podophyllotoxin toxicity were evaluated in vitro and in vivo. The results showed that CUR could protect POD-induced cytotoxicity by recovering the G2/M arrest and decrease the changes of membrane potential and microtubule structure in Vero cells. A significant decrease of mortality ratesmore » was observed in Swiss mice treated by intragastrical administration of POD + CUR as compared with POD alone. The POD + CUR group also exhibited decreases in plasma transaminases, alkaline phosphatase, lactate dehydrogenase, plasma urea, creatinine and malondialdehyde level but elevated superoxide dismutase and glutathione levels as compared to the POD group. Histological examination of the liver and kidney demonstrated less morphological changes in the treatment of POD + CUR as compared with POD alone. The mechanism of the protective effects might be due to the competitive binding of CUR with POD in the same colchicines binding site as revealed by the tubulin polymerization assay and the molecular docking analysis, and the antioxidant activity against the oxidative stress induced by POD. In summary, both in vitro and in vivo data indicated the promising role of CUR as a protective agent against the POD poisoning. Highlights: ► A potential antidote to treat the podophyllotoxin (POD) intoxication is found. ► Curcumin showed promising effects against POD poisoning in vitro and in vivo. ► The mechanisms lie in the antioxidant activity and competitive binding with tubulin.« less

The effect of vortex merging and non-merging on the transfer of modal turbulent kinetic energy content

NASA Astrophysics Data System (ADS)

Ground, Cody; Vergine, Fabrizio; Maddalena, Luca

2016-08-01

A defining feature of the turbulent free shear layer is that its growth is hindered by compressibility effects, thus limiting its potential to sufficiently mix the injected fuel and surrounding airstream at the supersonic Mach numbers intrinsic to the combustor of air-breathing hypersonic vehicles. The introduction of streamwise vorticity is often proposed in an attempt to counteract these undesired effects. This fact makes the strategy of introducing multiple streamwise vortices and imposing upon them certain modes of mutual interaction in order to potentially enhance mixing an intriguing concept. However, many underlying fundamental characteristics of the flowfields in the presence such interactions are not yet well understood; therefore, the fundamental physics of these flowfields should be independently investigated before the explicit mixing performance is characterized. In this work, experimental measurements are taken with the stereoscopic particle image velocimetry technique on two specifically targeted modes of vortex interaction—the merging and non-merging of two corotating vortices. The fluctuating velocity fields are analyzed utilizing the proper orthogonal decomposition (POD) in order to identify the content, organization, and distribution of the modal turbulent kinetic energy content of the fluctuating velocity eigenmodes. The effects of the two modes of vortex interaction are revealed by the POD analysis which shows distinct differences in the modal features of the two cases. When comparing the low-order eigenmodes of the two cases, the size of the structures contained within the first ten modes is seen to increase as the flow progresses downstream for the merging case, whereas the opposite is true for the non-merging case. Additionally, the relative modal energy contribution of the first ten eigenmodes increases as the vortices evolve downstream for the merging case, whereas in the non-merging case the relative modal energy contribution decreases. The POD results show that the vortex merging process reorients and redistributes the relative turbulent kinetic energy content toward the larger-scale structures within the low-order POD eigenmodes. This result suggests that by specifically designing the vortex generation system to impose preselected modes of vortex interaction upon the flow it is possible to exert some form of control over the downstream evolution and distribution of the global and modal turbulent kinetic energy content.

Reader strategies: variability and error- methodology, findings, and health policy implications from a study of the U.S. population of mammographers

NASA Astrophysics Data System (ADS)

Beam, Craig A.

2002-04-01

Each year, approximately 60% of all US women over the age of 40 utilize mammography. Through the matrix of an imaging technology, this Population of Patients (POP) interacts with a population of approximately 20,000 physicians who interpret mammograms in the US. This latter Population of Diagnosticians (POD) operationally serves as the interface between an image-centric healthcare technology system and patient. Methods: using data collected from a large POD and POP based study, I evaluate the distribution of several ROC curve-related parameters in the POD and explore the health policy implications of a population ROC curve for mammography. Results and Conclusions: Principal Components Analysis suggests that two Binormal parameters are sufficient to explain variation in the POD and implies that the Binormal model is foundational to Health Policy Research in Mammography. A population ROC curve based on percentiles of the POD can be used to set targets to achieve national health policy goals. Medical Image Perception science provides the framework. Alternatively, a restrictive policy can be envisioned using performance criteria based on area. However, the data suggests this sort of policy would be too costly in terms of reduced healthcare service capacity in the US in the face of burgeoning demands.

Pod nursing on a medical/surgical unit: implementation and outcomes evaluation.

PubMed

Friese, Christopher R; Grunawalt, Julie C; Bhullar, Sara; Bihlmeyer, Karen; Chang, Robert; Wood, Winnie

2014-04-01

A medical/surgical unit at the University of Michigan Health System implemented a pod nursing model of care to improve efficiency and patient and staff satisfaction. One centralized station was replaced with 4 satellites and supplies were relocated next to patient rooms. Patients were assigned to 2 nurses who worked as partners. Three patient (satisfaction, call lights, and falls) and nurse (satisfaction and overtime) outcomes improved after implementation. Efforts should be focused on addressing patient acuity imbalances across assignments and strengthening communication among the healthcare team. Studies are needed to test the model in larger and more diverse settings.

Sensor web

NASA Technical Reports Server (NTRS)

Delin, Kevin A. (Inventor); Jackson, Shannon P. (Inventor)

2011-01-01

A Sensor Web formed of a number of different sensor pods. Each of the sensor pods include a clock which is synchronized with a master clock so that all of the sensor pods in the Web have a synchronized clock. The synchronization is carried out by first using a coarse synchronization which takes less power, and subsequently carrying out a fine synchronization to make a fine sync of all the pods on the Web. After the synchronization, the pods ping their neighbors to determine which pods are listening and responded, and then only listen during time slots corresponding to those pods which respond.

The postoperative Model for End stage Liver Disease score as a predictor of short-term outcome after transplantation of extended criteria donor livers.

PubMed

Benko, Tamas; Gallinat, Anja; Minor, Thomas; Saner, Fuat H; Sotiropoulos, Georgios C; Paul, Andreas; Hoyer, Dieter P

2017-06-01

Recently, the postoperative Model for End stage Liver Disease score (POPMELD) was suggested as a definition of postoperative graft dysfunction and a predictor of outcome after liver transplantation (LT). The aim of the present study was to validate this concept in the context of extended criteria donor (ECD) organs. Single-center prospectively collected data (OPAL study/01/11-12/13) of 116 ECD LTs were utilized. For each recipient, the Model for End stage Liver Disease (MELD) score was calculated for 7 postoperative days (PODs). The ability of international normalized ratio, bilirubin, aspartate aminotransferase, Donor Risk Index, a recent definition of early allograft dysfunction, and the POPMELD was compared to predict 90-day graft loss. Predictive abilities were compared by receiver operating characteristic curves, sensitivity and specificity, and positive and negative predictive values. The median Donor Risk Index was 1.8. In all, 60.3% of recipients were men [median age of 54 (23-68) years]. The median POD1-7 peak-aspartate aminotransferase value was 1052 (194-17 577) U/l. The rate of early allograft dysfunction was 22.4%. The 90-day graft survival was 89.7%. Out of possible predictors of the 90-day graft loss MELD on POD5 was the best predictor of outcome (area under the curve=0.84). A MELD score of 16 or more on POD5 predicted the 90-day graft loss with a specificity of 80.8%, a sensitivity of 81.8%, and a positive and negative predictive value of 31 and 97.7%. A MELD score of 16 or more on POD5 is an excellent predictor of outcome in ECD donor LT. Routine evaluation of POPMELD scores might support clinical decision-making and should be reported routinely in clinical trials.

Real-time simulation of biological soft tissues: a PGD approach.

PubMed

Niroomandi, S; González, D; Alfaro, I; Bordeu, F; Leygue, A; Cueto, E; Chinesta, F

2013-05-01

We introduce here a novel approach for the numerical simulation of nonlinear, hyperelastic soft tissues at kilohertz feedback rates necessary for haptic rendering. This approach is based upon the use of proper generalized decomposition techniques, a generalization of PODs. Proper generalized decomposition techniques can be considered as a means of a priori model order reduction and provides a physics-based meta-model without the need for prior computer experiments. The suggested strategy is thus composed of an offline phase, in which a general meta-model is computed, and an online evaluation phase in which the results are obtained at real time. Results are provided that show the potential of the proposed technique, together with some benchmark test that shows the accuracy of the method. Copyright © 2013 John Wiley & Sons, Ltd.

Soybean fruit development and set at the node level under combined photoperiod and radiation conditions.

PubMed

Nico, Magalí; Mantese, Anita I; Miralles, Daniel J; Kantolic, Adriana G

2016-01-01

In soybean, long days during post-flowering increase seed number. This positive photoperiodic effect on seed number has been previously associated with increments in the amount of radiation accumulated during the crop cycle because long days extend the duration of the crop cycle. However, evidence of intra-nodal processes independent of the availability of assimilates suggests that photoperiodic effects at the node level might also contribute to pod set. This work aims to identify the main mechanisms responsible for the increase in pod number per node in response to long days; including the dynamics of flowering, pod development, growth and set at the node level. Long days increased pods per node on the main stems, by increasing pods on lateral racemes (usually dominated positions) at some main stem nodes. Long days lengthened the flowering period and thereby increased the number of opened flowers on lateral racemes. The flowering period was prolonged under long days because effective seed filling was delayed on primary racemes (dominant positions). Long days also delayed the development of flowers into pods with filling seeds, delaying the initiation of pod elongation without modifying pod elongation rate. The embryo development matched the external pod length irrespective of the pod's chronological age. These results suggest that long days during post-flowering enhance pod number per node through a relief of the competition between pods of different hierarchy within the node. The photoperiodic effect on the development of dominant pods, delaying their elongation and therefore postponing their active growth, extends flowering and allows pod set at positions that are usually dominated. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Responses of Reactive Oxygen Scavenging Enzymes, Proline and Malondialdehyde to Water Deficits among Six Secondary Successional Seral Species in Loess Plateau

PubMed Central

Du, Feng; Shi, Huijun; Zhang, Xingchang; Xu, Xuexuan

2014-01-01

Drought can impact local vegetation dynamics in a long term. In order to predict the possible successional pathway of local community under drought, the responses of some drought resistance indices of six successional seral species in the semi-arid Loss Hilly Region of China were illustrated and compared on three levels of soil water deficits along three growing months (7, 8 and 9). The results showed that: 1) the six species had significant differences in SOD, POD activities and MDA content. The rank correlations between SOD, POD activities and the successional niche positions of the six species were positive, and the correlation between MDA content and the niche positions was negative; 2) activities of SOD, CAT and POD, and content of proline and MDA had significant differences among the three months; 3) there existed significant interactions of SOD, CAT, POD activities and MDA content between months and species. With an exception, no interaction of proline was found. Proline in leaves had a general decline in reproductive month; 4) SOD, CAT, POD activities and proline content had negative correlations with MDA content. Among which, the correlation between SOD activity and MDA content was significant. The results implied that, in arid or semiarid region, the species at later successional stage tend to have strong drought resistance than those at early stage. Anti-drought indices can partially interpret the pathway of community succession in the drought impacted area. SOD activity is more distinct and important on the scope of protecting membrane damage through the scavenging of ROS on exposure to drought. PMID:24914928

Thrombocytopenia following implantation of the stentless biological sorin freedom SOLO valve.

PubMed

Gersak, Borut; Gartner, Urska; Antonic, Miha

2011-07-01

Stentless biological valves have proven advantages in hemodynamic performance and left ventricular function compared to stented biological valves. Following a marked postoperative fall in the platelet count of patients after implantation of the Freedom SOLO valve, the study aim was to confirm clinical observations that this effect was more severe in patients receiving Freedom SOLO valves than in those receiving St. Jude Medical (SJM) mechanical aortic valves. Preoperative and postoperative platelet counts were compared in two groups of patients who underwent aortic valve replacement (AVR) without any concomitant procedures between January and December 2007. Patients received either a Freedom SOLO valve (n = 28) or a SJM mechanical valve (n = 41). Mean values of platelet counts were compared using three multiple linear regression models. Platelet counts were significantly lower in the Freedom SOLO group than in the SJM group from the first postoperative day (POD 1) up to POD 6 (p <0.001). In three patients of the Freedom SOLO group the platelet count fell below 30x10(9)/l, while the lowest level in the SJM group was 75x10(9)/l. Based on multiple linear regression models, the type of valve implanted had a statistically significant influence on postoperative platelet counts on POD 1, POD 3, and POD 5 (p <0.001). Whilst the reason for this phenomenon is unknown, the use of consistent monitoring should prevent severe falls in platelet count from becoming dangerous for the patient. Further studies are required to investigate the phenomenon since, despite a shorter cardiopulmonary bypass time, the fall in platelet count was more profound in the Freedom SOLO group.

POD Analysis of Jet-Plume/Afterbody-Wake Interaction

NASA Astrophysics Data System (ADS)

Murray, Nathan E.; Seiner, John M.; Jansen, Bernard J.; Gui, Lichuan; Sockwell, Shuan; Joachim, Matthew

2009-11-01

The understanding of the flow physics in the base region of a powered rocket is one of the keys to designing the next generation of reusable launchers. The base flow features affect the aerodynamics and the heat loading at the base of the vehicle. Recent efforts at the National Center for Physical Acoustics at the University of Mississippi have refurbished two models for studying jet-plume/afterbody-wake interactions in the NCPA's 1-foot Tri-Sonic Wind Tunnel Facility. Both models have a 2.5 inch outer diameter with a nominally 0.5 inch diameter centered exhaust nozzle. One of the models is capable of being powered with gaseous H2 and O2 to study the base flow in a fully combusting senario. The second model uses hi-pressure air to drive the exhaust providing an unheated representative flow field. This unheated model was used to acquire PIV data of the base flow. Subsequently, a POD analysis was performed to provide a first look at the large-scale structures present for the interaction between an axisymmetric jet and an axisymmetric afterbody wake. PIV and Schlieren data are presented for a single jet-exhaust to free-stream flow velocity along with the POD analysis of the base flow field.

Selection of Soybean Pods by the Stink Bugs, Nezara viridula and Piezodorus guildinii

PubMed Central

Molina, Gonzalo A. R.; Trumper, Eduardo V.

2012-01-01

Different biological parameters of the stink bugs, Nezara viridula L. and Piezodorus guildinii Westwood (Hemiptera: Pentatomidae), are affected by the developmental stage of the soybean (Glycine max Merrill) pods they feed on. These effects of the soybean on the stink bugs could represent a selection pressure leading to the ability of these species to discriminate the phenological stage of soybean pods, and, therefore, to exhibit feeding preferences. We designed three studies: (1) Distant detection of soybean pods through an olfactometer; (2) Free choice tests to evaluate preferences for soybean pods of different developmental stages; (3) No choice tests to study effects of soybean pod development on feeding time and number of probes. Stink bugs showed no differential response to olfactometer arms with or without soybean pods, suggesting an inability to detect soybean volatiles. Free choice tests showed no species effects on pods selection, but significant differences among fifth instar nymphs, adult male, and adult females. Fifth instar nymphs fed more frequently on soybean pods of advanced development stages compared to female adults, despite previous evidence showing poor development of stink bugs fed pods of the same stage. No choice tests showed significant effects of stink bug species, stink bug stage and sex, and soybean pod phenology. N. viridula expressed shorter feeding times and higher numbers of probes than P. guildinii. The highest numbers of probes of both species were observed when they were fed soybean pods in early phenological stages. When placed in direct contact with food, fifth instar nymphs prefered to feed on more developed pods, despite these pods being suboptimal food items. These results suggest that for the ecological time framework of soybean-stink bugs coexistence, around thirty-five years in Argentina, the selection pressure was not enough for stink bugs to evolve food preferences that match their performance on soybean pods of different development stages. PMID:23437991

Soybean fruit development and set at the node level under combined photoperiod and radiation conditions

PubMed Central

Nico, Magalí; Mantese, Anita I.; Miralles, Daniel J.; Kantolic, Adriana G.

2016-01-01

In soybean, long days during post-flowering increase seed number. This positive photoperiodic effect on seed number has been previously associated with increments in the amount of radiation accumulated during the crop cycle because long days extend the duration of the crop cycle. However, evidence of intra-nodal processes independent of the availability of assimilates suggests that photoperiodic effects at the node level might also contribute to pod set. This work aims to identify the main mechanisms responsible for the increase in pod number per node in response to long days; including the dynamics of flowering, pod development, growth and set at the node level. Long days increased pods per node on the main stems, by increasing pods on lateral racemes (usually dominated positions) at some main stem nodes. Long days lengthened the flowering period and thereby increased the number of opened flowers on lateral racemes. The flowering period was prolonged under long days because effective seed filling was delayed on primary racemes (dominant positions). Long days also delayed the development of flowers into pods with filling seeds, delaying the initiation of pod elongation without modifying pod elongation rate. The embryo development matched the external pod length irrespective of the pod’s chronological age. These results suggest that long days during post-flowering enhance pod number per node through a relief of the competition between pods of different hierarchy within the node. The photoperiodic effect on the development of dominant pods, delaying their elongation and therefore postponing their active growth, extends flowering and allows pod set at positions that are usually dominated. PMID:26512057

Relation between acute and long-term cognitive decline after surgery: Influence of metabolic syndrome.

PubMed

Gambús, P L; Trocóniz, I F; Feng, X; Gimenez-Milá, M; Mellado, R; Degos, V; Vacas, S; Maze, M

2015-11-01

The relationship between persistent postoperative cognitive decline and the more common acute variety remains unknown; using data acquired in preclinical studies of postoperative cognitive decline we attempted to characterize this relationship. Low capacity runner (LCR) rats, which have all the features of the metabolic syndrome, were compared postoperatively with high capacity runner (HCR) rats for memory, assessed by trace fear conditioning (TFC) on the 7th postoperative day, and learning and memory (probe trial [PT]) assessed by the Morris water-maze (MWM) at 3 months postoperatively. Rate of learning (AL) data from the MWM test, were estimated by non-linear mixed effects modeling. The individual rat's TFC result at postoperative day (POD) 7 was correlated with its AL and PT from the MWM data sets at postoperative day POD 90. A single exponential decay model best described AL in the MWM with LCR and surgery (LCR-SURG) being the only significant covariates; first order AL rate constant was 0.07 s(-1) in LCR-SURG and 0.16s(-1) in the remaining groups (p<0.05). TFC was significantly correlated with both AL (R=0.74; p<0.0001) and PT (R=0.49; p<0.01). Severity of memory decline at 1 week after surgery presaged long-lasting deteriorations in learning and memory. Copyright © 2015 Elsevier Inc. All rights reserved.

Robust/optimal temperature profile control of a high-speed aerospace vehicle using neural networks.

PubMed

Yadav, Vivek; Padhi, Radhakant; Balakrishnan, S N

2007-07-01

An approximate dynamic programming (ADP)-based suboptimal neurocontroller to obtain desired temperature for a high-speed aerospace vehicle is synthesized in this paper. A 1-D distributed parameter model of a fin is developed from basic thermal physics principles. "Snapshot" solutions of the dynamics are generated with a simple dynamic inversion-based feedback controller. Empirical basis functions are designed using the "proper orthogonal decomposition" (POD) technique and the snapshot solutions. A low-order nonlinear lumped parameter system to characterize the infinite dimensional system is obtained by carrying out a Galerkin projection. An ADP-based neurocontroller with a dual heuristic programming (DHP) formulation is obtained with a single-network-adaptive-critic (SNAC) controller for this approximate nonlinear model. Actual control in the original domain is calculated with the same POD basis functions through a reverse mapping. Further contribution of this paper includes development of an online robust neurocontroller to account for unmodeled dynamics and parametric uncertainties inherent in such a complex dynamic system. A neural network (NN) weight update rule that guarantees boundedness of the weights and relaxes the need for persistence of excitation (PE) condition is presented. Simulation studies show that in a fairly extensive but compact domain, any desired temperature profile can be achieved starting from any initial temperature profile. Therefore, the ADP and NN-based controllers appear to have the potential to become controller synthesis tools for nonlinear distributed parameter systems.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods removed from Endeavour is lowered toward a transporter. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

NASA Image and Video Library

2003-09-05

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods removed from Endeavour is lowered toward a transporter. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

KENNEDY SPACE CENTER, FLA. - Technicians in the Orbiter Processing Facility oversee removal of one of two orbital maneuvering system (OMS) pods from Endeavour. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

NASA Image and Video Library

2003-09-05

KENNEDY SPACE CENTER, FLA. - Technicians in the Orbiter Processing Facility oversee removal of one of two orbital maneuvering system (OMS) pods from Endeavour. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility prepare to remove one of two orbital maneuvering system (OMS) pods from Endeavour. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

NASA Image and Video Library

2003-09-05

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility prepare to remove one of two orbital maneuvering system (OMS) pods from Endeavour. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods removed from Endeavour is suspended overhead. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

NASA Image and Video Library

2003-09-05

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods removed from Endeavour is suspended overhead. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods removed from Endeavour is lowered onto a transporter. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

NASA Image and Video Library

2003-09-05

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods removed from Endeavour is lowered onto a transporter. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts. OMS pods are removed during Orbiter Major Modifications. Once removed, the OMS pods undergo in-depth structural inspections, system checks and the thrusters are changed out.

The Copernicus POD Service and beyond: Scientific exploitation of the orbit-related data and products

NASA Astrophysics Data System (ADS)

Peter, Heike; Fernández, Jaime; Fernández, Carlos; Féménias, Pierre

2017-04-01

The Copernicus POD (Precise Orbit Determination) Service is part of the Copernicus Processing Data Ground Segment (PDGS) of the Sentinel-1, -2 and -3 missions. A GMV-led consortium is operating the Copernicus POD Service being in charge of generating precise orbital products and auxiliary data files for their use as part of the processing chains of the respective Sentinel PDGS. The orbital products are available through the dedicated Copernicus data hub. The Copernicus POD Service is supported by the Copernicus POD Quality Working Group (QWG) for the validation of the orbit product accuracy. The QWG is delivering independent orbit solutions for the satellites. The cross-comparison of all these orbit solutions is essential to monitor and to improve the orbit accuracy because for Sentinel-1 and -2 this is the only possibility to externally assess the quality of the orbits. Each of the Sentinel-1, -2, and -3 satellites carries dual-frequency GPS receivers delivering the necessary measurements for the precise orbit determination of the satellites. The Sentinel-3 satellites are additionally equipped with a DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) receiver and a Laser Retro Reflector for Satellite Laser Ranging. These two additional observation techniques allow for independent validation of the GPS-derived orbit determination results and for studying biases between the different techniques. The scientific exploitation of the orbit determination and the corresponding input data is manifold. Sophisticated satellite macro models improve the modelling of the non-gravitational forces acting on the satellite. On the other hand, comparisons to orbits based on pure empirical modelling of the non-gravitational forces help to sort out deficiencies in the satellite geometry information. The dual-frequency GPS data delivered by the satellites can give valuable input for ionospheric studies important for Space Weather research. So-called kinematic orbits, being a time series of discrete satellite positions derived from GPS, may be used for the modelling of the time-variable low degree harmonics of the Earth's gravity field. This is very important to support filling the possible gap between the dedicated gravity field missions GRACE and GRACE Follow-on. Many other important research topics could be mentioned here as well. Therefore a broad scientific community could benefit of an open access not only to the operational orbits (which is partially available today), but also to the GPS observations, satellite attitude and other ancillary information to perform POD. This poster presents firstly the status of the Copernicus POD Service in terms of products generated, accuracy and timeliness of the operational orbital products and all potential inputs available. Then the main focus of the poster is to outline the possibilities for scientific exploitation of the orbit determination and the corresponding input data. The great scientific potential of these data is explained to confirm the need of making them publicly available for scientists.

PODIO: An Event-Data-Model Toolkit for High Energy Physics Experiments

NASA Astrophysics Data System (ADS)

Gaede, F.; Hegner, B.; Mato, P.

2017-10-01

PODIO is a C++ library that supports the automatic creation of event data models (EDMs) and efficient I/O code for HEP experiments. It is developed as a new EDM Toolkit for future particle physics experiments in the context of the AIDA2020 EU programme. Experience from LHC and the linear collider community shows that existing solutions partly suffer from overly complex data models with deep object-hierarchies or unfavorable I/O performance. The PODIO project was created in order to address these problems. PODIO is based on the idea of employing plain-old-data (POD) data structures wherever possible, while avoiding deep object-hierarchies and virtual inheritance. At the same time it provides the necessary high-level interface towards the developer physicist, such as the support for inter-object relations and automatic memory-management, as well as a Python interface. To simplify the creation of efficient data models PODIO employs code generation from a simple yaml-based markup language. In addition, it was developed with concurrency in mind in order to support the use of modern CPU features, for example giving basic support for vectorization techniques.

Schlieren optics for leak detection

NASA Technical Reports Server (NTRS)

Peale, Robert E.; Ruffin, Alranzo B.

1995-01-01

The purpose of this research was to develop an optical method of leak detection. Various modifications of schlieren optics were explored with initial emphasis on leak detection of the plumbing within the orbital maneuvering system of the space shuttle (OMS pod). The schlieren scheme envisioned for OMS pod leak detection was that of a high contrast pattern on flexible reflecting material imaged onto a negative of the same pattern. We find that the OMS pod geometry constrains the characteristic length scale of the pattern to the order of 0.001 inch. Our experiments suggest that optical modulation transfer efficiency will be very low for such patterns, which will limit the sensitivity of the technique. Optical elements which allow a negative of the scene to be reversibly recorded using light from the scene itself were explored for their potential in adaptive single-ended schlieren systems. Elements studied include photochromic glass, bacteriorhodopsin, and a transmissive liquid crystal display. The dynamics of writing and reading patterns were studied using intensity profiles from recorded images. Schlieren detection of index gradients in air was demonstrated.

Precise orbit determination for BDS3 experimental satellites using iGMAS and MGEX tracking networks

NASA Astrophysics Data System (ADS)

Li, Xingxing; Yuan, Yongqiang; Zhu, Yiting; Huang, Jiande; Wu, Jiaqi; Xiong, Yun; Zhang, Xiaohong; Li, Xin

2018-04-01

In this contribution, we focus on the precise orbit determination (POD) for BDS3 experimental satellites with the international GNSS Monitoring and Assessment System (iGMAS) and Multi-GNSS Experiment (MGEX) tracking networks. The datasets of DOY (day of year) 001-230 in 2017 are analyzed with different processing strategies. By comparing receiver clock biases and receiver B1I-B3I DCBs, it is confirmed that there is no obvious systematic bias between experimental BDS3 and BDS2 in the common B1I and B3I signals, which indicates that experimental BDS3 and BDS2 can be treated as one system when performing combined POD. With iGMAS-only BDS3 stations, the 24-h overlap RMS of BDS3 + BDS2 + GPS combined POD is 24.3, 16.1 and 8.4 cm in along-track, cross-track and radial components, which is better than BDS3-only POD by 80-90% and better than BDS3+BDS2 combined POD by about 10%. With more stations (totally 20 stations from both iGMAS and MGEX) and the proper ambiguity resolution strategy (GEO ambiguities are float and BDS3 ambiguities are fixed), the performance of BDS3 POD can be further improved to 14.6, 7.9 and 3.7 cm, respectively, in along-track, cross-track and radial components, which is comparable to the performance of BDS2 POD. The 230-day SLR validations of C32, C33 and C34 show that the mean differences of - 3.48 , 7.81 and 8.19 cm can be achieved, while the STD is 13.35, 13.46 and 13.11 cm, respectively. Furthermore, the 230-day overlap comparisons reveal that C31 most likely still uses an orbit-normal mode and exhibits similar orbit modeling problems in orbit-normal periods as found in most of the BDS2 satellites.

Inflammatory markers in postoperative delirium (POD) and cognitive dysfunction (POCD): A meta-analysis of observational studies

PubMed Central

Liu, Xuling; Yu, Yang

2018-01-01

Background The aim of this study was to summarize and discuss the similarities and differences in inflammatory biomarkers in postoperative delirium (POD) and cognitive dysfunction (POCD). Methods A systematic retrieval of literature up to June 2017 in PubMed, Embase, the Cochrane Library, the China National Knowledge Infrastructure database, and the Wanfang database was conducted. Extracted data were analyzed with STATA (version 14). The standardized mean difference (SMD) and the 95% confidence interval (95% CI) of each indicator were calculated using a random effect model. We also performed tests of heterogeneity, sensitivity analysis, assessments of bias, and meta-regression in this meta-analysis. Results A total of 54 observational studies were included. By meta-analysis we found significantly increased C-reactive protein (CRP) (9 studies, SMD 0.883, 95% CI 0.130 to 1.637, P = 0.022 in POD; 10 studies, SMD -0.133, 95% CI -0.512 to 0.246, P = 0.429 in POCD) and interleukin (IL)-6 (7 studies, SMD 0.386, 95% CI 0.054 to 0.717, P = 0.022 in POD; 16 studies, SMD 0.089, 95% CI -0.133 to 0.311, P = 0.433 in POCD) concentrations in both POD and POCD patients. We also found that the SMDs of CRP and IL-6 from POCD patients were positively correlated with surgery type in the meta-regression (CRP: Coefficient = 1.555365, P = 0.001, 10 studies; IL-6: Coefficient = -0.6455521, P = 0.086, 16 studies). Conclusion Available evidence from medium-to-high quality observational studies suggests that POD and POCD are indeed correlated with the concentration of peripheral and cerebrospinal fluid (CSF) inflammatory markers. Some of these markers, such as CRP and IL-6, play roles in both POD and POCD, while others are specific to either one of them. PMID:29641605

Towards a General Turbulence Model for Planetary Boundary Layers Based on Direct Statistical Simulation

NASA Astrophysics Data System (ADS)

Skitka, J.; Marston, B.; Fox-Kemper, B.

2016-02-01

Sub-grid turbulence models for planetary boundary layers are typically constructed additively, starting with local flow properties and including non-local (KPP) or higher order (Mellor-Yamada) parameters until a desired level of predictive capacity is achieved or a manageable threshold of complexity is surpassed. Such approaches are necessarily limited in general circumstances, like global circulation models, by their being optimized for particular flow phenomena. By building a model reductively, starting with the infinite hierarchy of turbulence statistics, truncating at a given order, and stripping degrees of freedom from the flow, we offer the prospect a turbulence model and investigative tool that is equally applicable to all flow types and able to take full advantage of the wealth of nonlocal information in any flow. Direct statistical simulation (DSS) that is based upon expansion in equal-time cumulants can be used to compute flow statistics of arbitrary order. We investigate the feasibility of a second-order closure (CE2) by performing simulations of the ocean boundary layer in a quasi-linear approximation for which CE2 is exact. As oceanographic examples, wind-driven Langmuir turbulence and thermal convection are studied by comparison of the quasi-linear and fully nonlinear statistics. We also characterize the computational advantages and physical uncertainties of CE2 defined on a reduced basis determined via proper orthogonal decomposition (POD) of the flow fields.

Expression of an alfalfa (Medicago sativa L.) peroxidase gene in transgenic Arabidopsis thaliana enhances resistance to NaCl and H2O2.

PubMed

Teng, K; Xiao, G Z; Guo, W E; Yuan, J B; Li, J; Chao, Y H; Han, L B

2016-05-23

Peroxidases (PODs) are enzymes that play important roles in catalyzing the reduction of H2O2 and the oxidation of various substrates. They function in many different and important biological processes, such as defense mechanisms, immune responses, and pathogeny. The POD genes have been cloned and identified in many plants, but their function in alfalfa (Medicago sativa L.) is not known, to date. Based on the POD gene sequence (GenBank accession No. L36157.1), we cloned the POD gene in alfalfa, which was named MsPOD. MsPOD expression increased with increasing H2O2. The gene was expressed in all of the tissues, including the roots, stems, leaves, and flowers, particularly in stems and leaves under light/dark conditions. A subcellular analysis showed that MsPOD was localized outside the cells. Transgenic Arabidopsis with MsPOD exhibited increased resistance to H2O2 and NaCl. Moreover, POD activity in the transgenic plants was significantly higher than that in wild-type Arabidopsis. These results show that MsPOD plays an important role in resistance to H2O2 and NaCl.

A flux-based assessment of above and below ground biomass of Holm oak (Quercus ilex L.) seedlings after one season of exposure to high ozone concentrations

NASA Astrophysics Data System (ADS)

Gerosa, Giacomo; Fusaro, Lina; Monga, Robert; Finco, Angelo; Fares, Silvano; Manes, Fausto; Marzuoli, Riccardo

2015-07-01

Young plants of Holm oak (Quercus ilex) were exposed in non-limiting water conditions to four different levels of ozone (O3) concentrations in Open-Top Chambers during one growing season to evaluate biomass losses on roots, stems and leaves in relation to O3 exposure (AOT40) and phytotoxical ozone dose (POD1) absorbed. The exposure-effect and dose-effect relationships for the total biomass were statistically significant and indicated a reduction of 4% and 5.2% of the total biomass for each increase step of 10000 ppb h of AOT40 and 10 mmol m-2 of POD1, respectively. The results indicate a critical level for Holm oak protection of 7 mmol m-2 of POD1, which corresponds to 4% of total biomass reduction. The linear regressions based on the POD1 were significant for roots and stem biomass losses, but not significant for leaf biomass. The biomass loss rate at increasing POD1 was higher for roots than for stems and leaves, suggesting that stem growth under high levels of O3 is less affected than root growth. Because of the scarcity of data from the Mediterranean area, these results can be relevant for the O3 risk assessment models and for the definition of new O3 critical levels for forests in Europe.

Examining the Effects of Video Modeling and Prompts to Teach Activities of Daily Living Skills.

PubMed

Aldi, Catarina; Crigler, Alexandra; Kates-McElrath, Kelly; Long, Brian; Smith, Hillary; Rehak, Kim; Wilkinson, Lisa

2016-12-01

Video modeling has been shown to be effective in teaching a number of skills to learners diagnosed with autism spectrum disorders (ASD). In this study, we taught two young men diagnosed with ASD three different activities of daily living skills (ADLS) using point-of-view video modeling. Results indicated that both participants met criterion for all ADLS. Participants did not maintain mastery criterion at a 1-month follow-up, but did score above baseline at maintenance with and without video modeling. • Point-of-view video models may be an effective intervention to teach daily living skills. • Video modeling with handheld portable devices (Apple iPod or iPad) can be just as effective as video modeling with stationary viewing devices (television or computer). • The use of handheld portable devices (Apple iPod and iPad) makes video modeling accessible and possible in a wide variety of environments.

Evaluation of mature soybean pods as a food source for two pod-sucking bugs, Riptortus pedestris (Hemiptera: Alydidae) and Halyomorpha halys (Hemiptera: Pentatomidae)

PubMed Central

Rahman, M. Mahbubur

2017-01-01

Riptortus pedestris (Fabricius) and Halyomorpha halys (Stål) cause injury to soybeans by piercing and sucking pods and seeds. Growers believe that new damage decreases near to harvest despite the occurrence of these bugs at that time. As this question has never been assessed, we evaluated two diets: a) mature soybean pods (dried shell + dried soybean seeds) and b) dried soybean seeds for the two bugs by assessing their biological, behavioral, and morphological attributes on each diet in laboratory. While nymphs of both species were able to develop and adults able to reproduce on the tested diets, bugs fed on pods had longer development times and 2.2 to 5.0 times higher mortality rates than bugs fed on seeds. Furthermore, adult longevity of R. pedestris and H. halys fed on pods was 8.4 and 7.5 days shorter, respectively, than that of bugs fed on seeds. However, pod feeding had no effect on adult fecundity or egg viability. In a behavioral choice test, adult R. pedestris preferred seeds over pods and probed seeds longer than pods. On average, adult H. halys also preferred seeds over pods, although 15.6% of H. halys showed the reverse, preferring pods over seeds. The proboscis length and estimated depth of stylet penetration into the host tissue of both nymphs and adults of both species was much greater than the thickness of the pod shell, suggesting that mouthpart structure does not explain the negative effects of pods vs. seeds. In conclusion, mature soybean pods were found to be a suitable food source for both R. pedestris and H. halys despite some negative effects, and thus careful attention should be paid to the population levels of these two bugs approaching harvest to reduce economic damage in soybean. PMID:28430798

Highly Efficient and Stable Novel NanoBiohybrid Catalyst to Avert 3,4-Dihydroxybenzoic Acid Pollutant in Water.

PubMed

Das, Rasel; Hamid, Sharifah Bee Abd; Annuar, Mohamad Suffian Mohamad

2016-10-10

The present study reported for the first time covalent immobilization of protocatechuate 3,4-dioxygenase (3,4-POD) onto functionalized multi-walled carbon nanotubes (F-MWCNT) for degrading the toxic 3,4-dihydroxybenzoic acid (3,4-DHBA) pollutant in water. The F-MWCNTs had a maximum 3,4-POD loading of 1060 μg/mg. Immobilized 3,4 POD had 44% of relative structural changes to its free configurations. Nevertheless, >90% of relative activity and about 50% of catalytic efficiency were retained to the free enzyme. Immobilized 3,4-POD demonstrated higher alkaline stability and thermostability than the free 3,4-POD. The free and immobilized 3,4-POD lost 82% and 66% of relative activities, respectively after 180 min of incubations at 90 °C. Excellent shelf-life was observed for the immobilized 3,4-POD with residual activity of 56% compared with 41% and 39% of the free 3,4-POD at 4 °C and 25 °C over 30 days storage. Immobilized 3,4-POD showed >60% of catalytic activity retention even after ten-cycle uses, defraying the expenses of free 3,4-POD productions for long term uses. Finally, the immobilized 3,4-POD removed 71% of 3,4-DHBA from water in <4 h, paving its future application for water purification with reduced costs and time.

Highly Efficient and Stable Novel NanoBiohybrid Catalyst to Avert 3,4-Dihydroxybenzoic Acid Pollutant in Water

PubMed Central

Das, Rasel; Hamid, Sharifah Bee Abd; Annuar, Mohamad Suffian Mohamad

2016-01-01

The present study reported for the first time covalent immobilization of protocatechuate 3,4-dioxygenase (3,4-POD) onto functionalized multi-walled carbon nanotubes (F-MWCNT) for degrading the toxic 3,4-dihydroxybenzoic acid (3,4-DHBA) pollutant in water. The F-MWCNTs had a maximum 3,4-POD loading of 1060 μg/mg. Immobilized 3,4 POD had 44% of relative structural changes to its free configurations. Nevertheless, >90% of relative activity and about 50% of catalytic efficiency were retained to the free enzyme. Immobilized 3,4-POD demonstrated higher alkaline stability and thermostability than the free 3,4-POD. The free and immobilized 3,4-POD lost 82% and 66% of relative activities, respectively after 180 min of incubations at 90 °C. Excellent shelf-life was observed for the immobilized 3,4-POD with residual activity of 56% compared with 41% and 39% of the free 3,4-POD at 4 °C and 25 °C over 30 days storage. Immobilized 3,4-POD showed >60% of catalytic activity retention even after ten-cycle uses, defraying the expenses of free 3,4-POD productions for long term uses. Finally, the immobilized 3,4-POD removed 71% of 3,4-DHBA from water in <4 h, paving its future application for water purification with reduced costs and time. PMID:27721429

Precise orbit determination of Multi-GNSS constellation including GPS GLONASS BDS and GALIEO

NASA Astrophysics Data System (ADS)

Dai, Xiaolei

2014-05-01

In addition to the existing American global positioning system (GPS) and the Russian global navigation satellite system (GLONASS), the new generation of GNSS is emerging and developing, such as the Chinese BeiDou satellite navigation system (BDS) and the European GALILEO system. Multi-constellation is expected to contribute to more accurate and reliable positioning and navigation service. However, the application of multi-constellation challenges the traditional precise orbit determination (POD) strategy that was designed usually for single constellation. In this contribution, we exploit a more rigorous multi-constellation POD strategy for the ongoing IGS multi-GNSS experiment (MGEX) where the common parameters are identical for each system, and the frequency- and system-specified parameters are employed to account for the inter-frequency and inter-system biases. Since the authorized BDS attitude model is not yet released, different BDS attitude model are implemented and their impact on orbit accuracy are studied. The proposed POD strategy was implemented in the PANDA (Position and Navigation Data Analyst) software and can process observations from GPS, GLONASS, BDS and GALILEO together. The strategy is evaluated with the multi-constellation observations from about 90 MGEX stations and BDS observations from the BeiDou experimental tracking network (BETN) of Wuhan University (WHU). Of all the MGEX stations, 28 stations record BDS observation, and about 80 stations record GALILEO observations. All these data were processed together in our software, resulting in the multi-constellation POD solutions. We assessed the orbit accuracy for GPS and GLONASS by comparing our solutions with the IGS final orbit, and for BDS and GALILEO by overlapping our daily orbit solution. The stability of inter-frequency bias of GLONASS and inter-system biases w.r.t. GPS for GLONASS, BDS and GALILEO were investigated. At last, we carried out precise point positioning (PPP) using the multi-constellation POD orbit and clock products, and analyzed the contribution of these POD products to PPP. Keywords: Multi-GNSS, Precise Orbit Determination, Inter-frequency bias, Inter-system bias, Precise Point Positioning

Effects of different pressure levels of CO2 pneumoperitoneum on liver regeneration after liver resection in a rat model.

PubMed

Komori, Yoko; Iwashita, Yukio; Ohta, Masayuki; Kawano, Yuichiro; Inomata, Masafumi; Kitano, Seigo

2014-08-01

A recent study demonstrated that high pressure of carbon dioxide (CO2) pneumoperitoneum before liver resection impairs postoperative liver regeneration. This study was aimed to investigate effects of varying insufflation pressures of CO2 pneumoperitoneum on liver regeneration using a rat model. 180 male Wistar rats were randomly divided into three groups: control group (without preoperative pneumoperitoneum), low-pressure group (with preoperative pneumoperitoneum at 5 mmHg), and high-pressure group (with preoperative pneumoperitoneum at 10 mmHg). After pneumoperitoneum, all rats were subjected to 70% partial hepatic resection and then euthanized at 0 min, 12 h, and on postoperative days (PODs) 1, 2, 4, and 7. Following outcome parameters were used: liver regeneration (liver regeneration rate, mitotic count, Ki-67 labeling index), hepatocellular damage (serum aminotransferases), oxidative stress [serum malondialdehyde (MDA)], interleukin-6 (IL-6), and hepatocyte growth factor (HGF) expression in the liver tissue. No significant differences were observed for all parameters between control and low-pressure groups. The liver regeneration rate and mitotic count were significantly decreased in the high-pressure group than in control and low-pressure groups on PODs 2 and 4. Postoperative hepatocellular damage was significantly greater in the high-pressure group on PODs 1, 2, 4, and 7 compared with control and/or low-pressure groups. Serum MDA levels were significantly higher in the high-pressure group on PODs 1 and 2, and serum IL-6 levels were significantly higher in the high-pressure group at 12 h and on POD 1, compared with control and/or low-pressure groups. The HGF tissue expression was significantly lower in the high-pressure group at 12 h and on PODs 1 and 4, compared with that in control and/or low-pressure groups. High-pressure pneumoperitoneum before 70% liver resection impairs postoperative liver regeneration, but low-pressure pneumoperitoneum has no adverse effects. This study suggests that following laparoscopic liver resection using appropriate pneumoperitoneum pressure, no impairment of liver regeneration occurs.

Pod Nursing on a Medical/Surgical Unit: Implementation and Outcomes Evaluation

PubMed Central

Friese, Christopher R.; Grunawalt, Julie C.; Bhullar, Sara; Bihlmeyer, Karen; Chang, Robert; Wood, Winnie

2014-01-01

A medical/surgical unit at the University of Michigan Health System implemented a pod nursing model of care to improve efficiency and patient and staff satisfaction. One centralized station was replaced with 4 satellites and supplies were relocated next to patient rooms. Patients were assigned to 2 nurses who worked as partners. Three patient (satisfaction, call lights, and falls) and nurse (satisfaction and overtime) outcomes improved after implementation. Efforts should be focused on addressing patient acuity imbalances across assignments and strengthening communication among the health care team. Studies are needed to test the model in larger and more diverse settings. PMID:24662689

Summary of model VTOL lift fan tests conducted at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Diedrich, J. H.

1975-01-01

The purpose of the tests was to obtain overall performance and influencing factors as well as detailed measurements of the internal flow characteristics. The first experiment consisted of crossflow tests of a 15-inch diameter fan installed in a two-dimensional wing. Tests were run with and without exit louvers over a range of tunnel speeds, fan speeds, and wing angle of attack. The wing was used for a study of installation effects on lift fan performance. The model tested consisted of three 5.5-inch diameter tip-turbine driven model VTOL lift fans mounted chord-wise in the two-dimensional wing to simulate a pod-type array. Several inlet and exit cover door configurations and an adjacent fuselage panel were tested. For the third program, a pod was attached to the wing, and an investigation was conducted of the effect of design tip speed on the aerodynamic performance and noise of a 15-inch diameter lift fan-in-pod under static and crossflow conditions. Three single VTOL lift fan stages were designed for the same overall total pressure ratio but at three different rotor tip speeds.

Dynamic changes in pod and fungal physiology associated with the shift from biotrophy to necrotrophy during the infection of Theobroma cacao by Moniliophthora roreri

USDA-ARS?s Scientific Manuscript database

Where it occurs in South and Central America, M. roreri (Mr) causes a destructive pod disease (frosty pod rot) on Theobroma cacao (cacao). Hand pollinated cacao pods were inoculated with Mr spores in the field and assessed for disease symptoms over a 90 day period. On average, pods showed symptoms o...

Alleviation of podophyllotoxin toxicity using coexisting flavonoids from Dysosma versipellis.

PubMed

Li, Juan; Sun, Hua; Jin, Lu; Cao, Wei; Zhang, Jin; Guo, Chong-Yi; Ding, Ke; Luo, Cheng; Ye, Wen-Cai; Jiang, Ren-Wang

2013-01-01

Podophyllotoxin (POD) is a lignan-type toxin existing in many herbs used in folk medicine. Until now, no effective strategy is available for the management of POD intoxication. This study aims to determine the protective effects of flavonoids (quercetin and kaempferol) on POD-induced toxicity. In Vero cells, both flavonoids protected POD-induced cytotoxicity by recovering alleviating G2/M arrest, decreasing ROS generation and changes of membrane potential, and recovering microtubule structure. In Swiss mice, the group given both POD and flavonoids group had significantly lower mortality rate and showed less damages in the liver and kidney than the group given POD alone. As compared to the POD group, the POD plus flavonoids group exhibited decreases in plasma transaminases, alkaline phosphatase, lactate dehydrogenase, plasma urea, creatinine and malondialdehyde levels, and increases in superoxide dismutase and glutathione levels. Histological examination of the liver and kidney showed less pathological changes in the treatment of POD plus flavonoids group. The protective mechanisms were due to the antioxidant activity of flavonoids against the oxidative stress induced by POD and the competitive binding of flavonoids against POD for the same colchicines-binding sites. The latter binding was confirmed by the tubulin assembly assay in combination with molecular docking analyses. In conclusion, this study for the first time demonstrated that the coexisting flavonoids have great protective effects against the POD toxicity, and results of this study highlighted the great potential of searching for effective antidotes against toxins based on the pharmacological clues.

Genomic regions, cellular components and gene regulatory basis underlying pod length variations in cowpea (V. unguiculata L. Walp).

PubMed

Xu, Pei; Wu, Xinyi; Muñoz-Amatriaín, María; Wang, Baogen; Wu, Xiaohua; Hu, Yaowen; Huynh, Bao-Lam; Close, Timothy J; Roberts, Philip A; Zhou, Wen; Lu, Zhongfu; Li, Guojing

2017-05-01

Cowpea (V. unguiculata L. Walp) is a climate resilient legume crop important for food security. Cultivated cowpea (V. unguiculata L) generally comprises the bushy, short-podded grain cowpea dominant in Africa and the climbing, long-podded vegetable cowpea popular in Asia. How selection has contributed to the diversification of the two types of cowpea remains largely unknown. In the current study, a novel genotyping assay for over 50 000 SNPs was employed to delineate genomic regions governing pod length. Major, minor and epistatic QTLs were identified through QTL mapping. Seventy-two SNPs associated with pod length were detected by genome-wide association studies (GWAS). Population stratification analysis revealed subdivision among a cowpea germplasm collection consisting of 299 accessions, which is consistent with pod length groups. Genomic scan for selective signals suggested that domestication of vegetable cowpea was accompanied by selection of multiple traits including pod length, while the further improvement process was featured by selection of pod length primarily. Pod growth kinetics assay demonstrated that more durable cell proliferation rather than cell elongation or enlargement was the main reason for longer pods. Transcriptomic analysis suggested the involvement of sugar, gibberellin and nutritional signalling in regulation of pod length. This study establishes the basis for map-based cloning of pod length genes in cowpea and for marker-assisted selection of this trait in breeding programmes. © 2016 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Alleviation of Podophyllotoxin Toxicity Using Coexisting Flavonoids from Dysosma versipellis

PubMed Central

Li, Juan; Sun, Hua; Jin, Lu; Cao, Wei; Zhang, Jin; Guo, Chong-Yi; Ding, Ke; Luo, Cheng; Ye, Wen-Cai; Jiang, Ren-Wang

2013-01-01

Podophyllotoxin (POD) is a lignan-type toxin existing in many herbs used in folk medicine. Until now, no effective strategy is available for the management of POD intoxication. This study aims to determine the protective effects of flavonoids (quercetin and kaempferol) on POD-induced toxicity. In Vero cells, both flavonoids protected POD-induced cytotoxicity by recovering alleviating G2/M arrest, decreasing ROS generation and changes of membrane potential, and recovering microtubule structure. In Swiss mice, the group given both POD and flavonoids group had significantly lower mortality rate and showed less damages in the liver and kidney than the group given POD alone. As compared to the POD group, the POD plus flavonoids group exhibited decreases in plasma transaminases, alkaline phosphatase, lactate dehydrogenase, plasma urea, creatinine and malondialdehyde levels, and increases in superoxide dismutase and glutathione levels. Histological examination of the liver and kidney showed less pathological changes in the treatment of POD plus flavonoids group. The protective mechanisms were due to the antioxidant activity of flavonoids against the oxidative stress induced by POD and the competitive binding of flavonoids against POD for the same colchicines-binding sites. The latter binding was confirmed by the tubulin assembly assay in combination with molecular docking analyses. In conclusion, this study for the first time demonstrated that the coexisting flavonoids have great protective effects against the POD toxicity, and results of this study highlighted the great potential of searching for effective antidotes against toxins based on the pharmacological clues. PMID:23991049

Comparing Distribution of Harbour Porpoises (Phocoena phocoena) Derived from Satellite Telemetry and Passive Acoustic Monitoring

PubMed Central

Rigét, Frank F.; Kyhn, Line A.; Sveegaard, Signe; Dietz, Rune; Tougaard, Jakob; Carlström, Julia A. K.; Carlén, Ida; Koblitz, Jens C.; Teilmann, Jonas

2016-01-01

Cetacean monitoring is essential in determining the status of a population. Different monitoring methods should reflect the real trends in abundance and patterns in distribution, and results should therefore ideally be independent of the selected method. Here, we compare two independent methods of describing harbour porpoise (Phocoena phocoena) relative distribution pattern in the western Baltic Sea. Satellite locations from 13 tagged harbour porpoises were used to build a Maximum Entropy (MaxEnt) model of suitable habitats. The data set was subsampled to one location every second day, which were sufficient to make reliable models over the summer (Jun-Aug) and autumn (Sep-Nov) seasons. The modelled results were compared to harbour porpoise acoustic activity obtained from 36 static acoustic monitoring stations (C-PODs) covering the same area. The C-POD data was expressed as the percentage of porpoise positive days/hours (the number of days/hours per day with porpoise detections) by season. The MaxEnt model and C-POD data showed a significant linear relationship with a strong decline in porpoise occurrence from west to east. This study shows that two very different methods provide comparable information on relative distribution patterns of harbour porpoises even in a low density area. PMID:27463509

Severe post-renal acute kidney injury, post-obstructive diuresis and renal recovery.

PubMed

Hamdi, Aïcha; Hajage, David; Van Glabeke, Emmanuel; Belenfant, Xavier; Vincent, François; Gonzalez, Frédéric; Ciroldi, Magali; Obadia, Edouard; Chelha, Riad; Pallot, Jean-Louis; Das, Vincent

2012-12-01

Study Type--Therapy (case series) Level of Evidence 4. What's known on the subject? and What does the study add? The pathophysiology of post-renal acute kidney injury (PR-AKI), i.e. caused by urinary tract obstruction, has been extensively studied in animal models but clinical studies on this subject are outdated, and/or have focused on the mechanisms of 'post-obstructive diuresis' (POD), a potentially life-threatening polyuria that can develop after the release of obstruction. In severe PR-AKI, the risk of occurrence of POD is high. POD occurrence predicts renal recovery without the persistence of severe chronic kidney failure. In the present study, the occurrence of POD and the persistence of chronic renal sequelae could be predicted early from clinical variables at admission before the release of obstruction. • To identify predictors of post-obstructive diuresis (POD) occurrence or severe chronic renal failure (CRF) persistence after the release of urinary tract obstruction in the setting of post-renal acute kidney injury (PR-AKI). • Bi-centre retrospective observational study of all patients with PR-AKI treated in two intensive care units (ICUs) from 1998 to 2010. • Clinical, biological and imaging characteristics on admission and after the release of obstruction were analysed with univariate and, if possible, multivariate analysis to search for predictors of (i) occurrence of POD (diuresis >4 L/day) after the release of obstruction; (ii) persistence of severe CRF (estimated glomerular filtration rate <30 mL/min/1.73 m(2), including end-stage CRF) at 3 months. • On admission, median (range) serum creatinine was 866 (247-3119) µmol/L. • POD occurred in 34 (63%) of the 54 analysable patients. On admission, higher serum creatinine (Odds ratio [OR] 1.002 per 1 µmol/L, 95% confidence interval [CI] 1.000-1.004, P = 0.004), higher serum bicarbonate (OR 1.36 per 1 mmol/L, 95% CI 1.13-1.65, P < 0.001), and urinary retention (OR 6.96, 95% CI 1.34-36.23, P = 0.01) independently predicted POD occurrence. • Severe CRF persisted in seven (21%) of the 34 analysable patients, including two (6%) cases of end-stage CRF. Predictors of severe CRF persistence after univariate analysis were: lower blood haemoglobin (P < 0.001) and lower serum bicarbonate (P = 0.03) on admission, longer time from admission to the release of obstruction (P = 0.01) and absence of POD (P = 0.04) after the release of obstruction. • In severe PR-AKI treated in ICU, POD occurrence was a frequent event that predicted renal recovery without severe CRF. • POD occurrence or severe CRF persistence could be predicted early from clinical and biological variables at admission before the release of obstruction. © 2012 THE AUTHORS. BJU INTERNATIONAL © 2012 BJU INTERNATIONAL.

Breeding for disease resistance in cacao

USDA-ARS?s Scientific Manuscript database

Cacao production must increase in order to meet the projected rise in the demand for chocolate. Approximately one-third of global production is lost annually to diseases and insects. Four diseases account for the greatest losses worldwide: black pod, caused by four Phytophthora spp; witches’ broom...

Mass prophylaxis dispensing concerns: traffic and public access to PODs.

PubMed

Baccam, Prasith; Willauer, David; Krometis, Justin; Ma, Yongchang; Sen, Atri; Boechler, Michael

2011-06-01

The ability to quickly dispense postexposure prophylaxis (PEP) using multiple points of dispensing (PODs) following a bioterrorism event could potentially save a large proportion of those who were exposed, while failure in PEP dispensing could have dire public health consequences. A Monte Carlo simulation was developed to explore the traffic flow and parking around PODs under different arrival rates and how these factors might affect the utilization rate of POD workers. The results demonstrate that the public can reasonably access the PODs under ideal conditions assuming a stationary (uniform) arrival rate. For the 5 nonstationary arrival rates tested, however, the available parking spaces quickly become filled, causing long traffic queues and resulting in total processing times that range from 1 hour to over 6 hours. Basic planning considerations should include the use of physical barriers, signage, and traffic control officers to help direct vehicular and pedestrian access to the PODs. Furthermore, the parking and traffic surrounding PODs creates long queues of people waiting to access the PODs. Thus, POD staff are fully used approximately 90% of the time, which can lead to worker fatigue and burn out.

Research for Future Training Modeling and Simulation Strategies

DTIC Science & Technology

2011-09-01

it developed an “ecosystem” for the content industry—first for iTunes and now in the iPad for publishers and gamers. The iTunes Store that Apple...launched in 2003 provides an excellent analogy to training users. Initially, users could purchase 200,000 iTunes items. Today, the store has over...its iPod and iTune Store has fundamentally changed the music industry and the way the end users expect to buy things. iPod owners used to buy albums

Flight test integration and evaluation of the LANTIRN system on the F-15E

NASA Astrophysics Data System (ADS)

Presuhn, Gary G.; Zeis, Joseph E.

1991-08-01

In today's high threat arena of air combat, the need to fly low, penetrate enemy defenses, strike effectively, and safely return to base is more valid than ever. The F-15E is designed to accomplish just that type of mission scenario, regardless of weather and time of day. In order to accomplish this demanding profile, any such aircraft requires terrain-following equipment and precision target designation. The LANTIRN system on the F-15E is designed to fulfill that role. This paper examines the two major aspects of the LANTIRN system found on the F-15E: the Navigation Pod and the Targeting Pod, and investigates flight test issues during F-15E integration testing. The Navigation Pod consists of two major subsystems, the Fixed Imaging Navigation Sensor (FINS) and the terrain following radar (TFR). Discussion of the FINS centers around the integration issues of the system and its utility in the night low level environment, as determined through flight test. In providing a 'window on the world,' this aspect of the LANTIRN system provides unique capabilities in navigation as well as weapons delivery. The TFR, the other major subsystem, is a continuation of the F-111 and RF-4 terrain following systems. While an effective system, integration of the TFR into the F-15E has been a challenge to the flight test community, with many lessons to be learned. The Targeting Pod is the second component of the LANTIRN system. Its purpose is to acquire and designate a target through use of its selectable dual field of view infrared sensor and laser ranger/designator. The laser also provides terminal guidance capability for precision guided weapons. Integration of the Targeting Pod into the avionics suite of the F-15E has provided classic examples of systems flight testing, evaluating both the technical and performance aspects of the pod, as well as the key human factors interface. The overall intent of this paper is to describe avionics testing, as applied to low level navigation and targeting systems, and to discuss lessons learned in that process, both of a specific and a general nature.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers discuss the next step in moving the orbital maneuvering system (OMS) pod behind them. The OMS pod will be installed on Atlantis. Two OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, workers discuss the next step in moving the orbital maneuvering system (OMS) pod behind them. The OMS pod will be installed on Atlantis. Two OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

Blood count and C-reactive protein evolution in gastric cancer patients with total gastrectomy surgery

PubMed Central

CSENDES J., Attila; MUÑOZ Ch., Andrea; BURGOS L., Ana María

2014-01-01

Background The complete blood count (CBC) and C-reactive protein (CRP) are useful inflammatory parameters for ruling out acute postoperative inflammatory complications. Aim To determine their changes in gastric cancer patients submitted to total gastrectomy. Methods This is a prospective study, with 36 patients with gastric cancer who were submitted to elective total gastrectomy. On the first, third and fifth postoperative day (POD), blood count and CRP changes were assessed. Patients with postoperative complications were excluded. Results Twenty-one (58%) were men and 15 (42%) women. The mean age was 65 years. The leukocytes peaked on the 1st POD with a mean of 13,826 u/mm³, and decreased to 8,266 u/mm³ by the 5th POD. The bacilliforms peaked on the 1st POD with a maximum value of 1.48%. CRP reached its maximum level on the 3rd POD with a mean of 144.64 mg/l±44.84. Preoperative hematocrit (HCT) was 35% and 33.67% by the 5th POD. Hemoglobin, showed similar values. Conclusions Leukocytes increased during the 1st POD but reached normal values by the 5th POD. CRP peaked on the 3rd POD but did not reach normal values by the 5th POD. PMID:25626929

POD-based constrained sensor placement and field reconstruction from noisy wind measurements: A perturbation study

DOE PAGES

Zhang, Zhongqiang; Yang, Xiu; Lin, Guang

2016-04-14

Sensor placement at the extrema of Proper Orthogonal Decomposition (POD) is efficient and leads to accurate reconstruction of the wind field from a limited number of measure- ments. In this paper we extend this approach of sensor placement and take into account measurement errors and detect possible malfunctioning sensors. We use the 48 hourly spa- tial wind field simulation data sets simulated using the Weather Research an Forecasting (WRF) model applied to the Maine Bay to evaluate the performances of our methods. Specifically, we use an exclusion disk strategy to distribute sensors when the extrema of POD modes are close.more » It turns out that this strategy can also reduce the error of recon- struction from noise measurements. Also, by a cross-validation technique, we successfully locate the malfunctioning sensors.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitholt, J.J.

Soybeans (Glycine max (L.) Merr.) were grown in the field in 1982 and 1983 (cv. Kent) and greenhouse (cv. McCall) to characterize the effects of timing and source-sink alterations on flower and immature pod abortion and to study the causes of abortion. Flowers and immature pods were marked during early flowering (R1 to R2) and late flowering (R3 to R4). Nineteen percent of the early flowers aborted in the greenhouse and 31 to 48% aborted in the field. Seventy-six to 92% and 77 to 90% of the late flowers aborted in the greenhouse and field, respectively. Defoliation increased early flowermore » abortion and depodding decreased late flower abortion. Fifteen and 19% of the early immature pods and the late immature pods from depodded plants aborted, respectively. Fifty-seven percent of the late immature pods aborted. Across both years there was not a consistent relationship between the concentrations of ethanol soluble carbohydrates, starch, ethanol soluble nitrogen, ethanol insoluble nitrogen, nitrate, and cations in the flowers or immature pods and abortion. During both early and late flowering, a single leaf located in the middle of the main stem that subtended flowers at anthesis, or immature pods was labeled with 3.7 x 10/sup 5/ Bq /sup 14/CO/sub 2/ for 1 h. After 24 h the entire plant was harvested, divided into flowers, pods, labeled leaf, and the remainder of the plant and the radioactivity was determined. The low aborting flowers and immature pods contained a greater percentage of the total /sup 14/C recovered than the high aborting flowers and immature pods. The results indirectly support the hypothesis that a signal compound produced by another plant part, perhaps the established pods, inhibits the development of aborting flowers and immature pods.« less

Proper orthogonal decomposition analysis for cycle-to-cycle variations of engine flow. Effect of a control device in an inlet pipe

NASA Astrophysics Data System (ADS)

Vu, Trung-Thanh; Guibert, Philippe

2012-06-01

This paper aims to investigate cycle-to-cycle variations of non-reacting flow inside a motored single-cylinder transparent engine in order to judge the insertion amplitude of a control device able to displace linearly inside the inlet pipe. Three positions corresponding to three insertion amplitudes are implemented to modify the main aerodynamic properties from one cycle to the next. Numerous particle image velocimetry (PIV) two-dimensional velocity fields following cycle database are post-treated to discriminate specific contributions of the fluctuating flow. We performed a multiple snapshot proper orthogonal decomposition (POD) in the tumble plane of a pent roof SI engine. The analytical process consists of a triple decomposition for each instantaneous velocity field into three distinctive parts named mean part, coherent part and turbulent part. The 3rd- and 4th-centered statistical moments of the proper orthogonal decomposition (POD)-filtered velocity field as well as the probability density function of the PIV realizations proved that the POD extracts different behaviors of the flow. Especially, the cyclic variability is assumed to be contained essentially in the coherent part. Thus, the cycle-to-cycle variations of the engine flows might be provided from the corresponding POD temporal coefficients. It has been shown that the in-cylinder aerodynamic dispersions can be adapted and monitored by controlling the insertion depth of the control instrument inside the inlet pipe.

Clinical evaluation of C-reactive protein and procalcitonin for the early detection of postoperative complications after laparoscopic sleeve gastrectomy.

PubMed

Frask, Agata; Orłowski, Michał; Dowgiałło-Wnukiewicz, Natalia; Lech, Paweł; Gajewski, Krzysztof; Michalik, Maciej

2017-06-01

Among the most common early complications after bariatric surgery are anastomosis leak and bleeding. In order to react quickly and perform accurate treatment before the clinical signs appear, early predictors should be found. In the study C-reactive protein (CRP) and procalcitonin (PCT) levels were investigated. Characterized by a relatively short half-life, they can predict surgical complications. To develop and implement certain standards for early detection of complications. The study involved 319 adults who underwent laparoscopic sleeve gastrectomy (LSG) as a surgical intervention for morbid obesity at the Department of General Surgery of Ceynowa Hospital in Wejherowo. Every patient had CRP and PCT levels measured before the surgery and on the 1 st and 2 nd postoperative day (POD). Early postoperative complications occurred in 19 (5.96%) patients. Septic and non-septic complications occurred in 3 and 16 patients respectively. Among the patients with septic postoperative complications CRP level increased significantly on the 2 nd POD compared to the remainder (p = 0.0221). Among the patients with non-septic postoperative complications CRP level increased significantly on the 1 st and 2 nd POD compared to the remainder. Among the patients with septic and non-septic postoperative complications PCT level increased significantly on the 2 nd POD compared to the remainder. The CRP and PCT level are supposed to be relevant diagnostic markers to predict non-septic and septic complications after LSG.

Clinical evaluation of C-reactive protein and procalcitonin for the early detection of postoperative complications after laparoscopic sleeve gastrectomy

PubMed Central

Frask, Agata; Orłowski, Michał; Lech, Paweł; Gajewski, Krzysztof; Michalik, Maciej

2017-01-01

Introduction Among the most common early complications after bariatric surgery are anastomosis leak and bleeding. In order to react quickly and perform accurate treatment before the clinical signs appear, early predictors should be found. In the study C-reactive protein (CRP) and procalcitonin (PCT) levels were investigated. Characterized by a relatively short half-life, they can predict surgical complications. Aim To develop and implement certain standards for early detection of complications. Material and methods The study involved 319 adults who underwent laparoscopic sleeve gastrectomy (LSG) as a surgical intervention for morbid obesity at the Department of General Surgery of Ceynowa Hospital in Wejherowo. Every patient had CRP and PCT levels measured before the surgery and on the 1st and 2nd postoperative day (POD). Results Early postoperative complications occurred in 19 (5.96%) patients. Septic and non-septic complications occurred in 3 and 16 patients respectively. Among the patients with septic postoperative complications CRP level increased significantly on the 2nd POD compared to the remainder (p = 0.0221). Among the patients with non-septic postoperative complications CRP level increased significantly on the 1st and 2nd POD compared to the remainder. Among the patients with septic and non-septic postoperative complications PCT level increased significantly on the 2nd POD compared to the remainder. Conclusions The CRP and PCT level are supposed to be relevant diagnostic markers to predict non-septic and septic complications after LSG. PMID:28694902

Sentinel-1A - First precise orbit determination results

NASA Astrophysics Data System (ADS)

Peter, H.; Jäggi, A.; Fernández, J.; Escobar, D.; Ayuga, F.; Arnold, D.; Wermuth, M.; Hackel, S.; Otten, M.; Simons, W.; Visser, P.; Hugentobler, U.; Féménias, P.

2017-09-01

Sentinel-1A is the first satellite of the European Copernicus programme. Equipped with a Synthetic Aperture Radar (SAR) instrument the satellite was launched on April 3, 2014. Operational since October 2014 the satellite delivers valuable data for more than two years. The orbit accuracy requirements are given as 5 cm in 3D. In order to fulfill this stringent requirement the precise orbit determination (POD) is based on the dual-frequency GPS observations delivered by an eight-channel GPS receiver. The Copernicus POD (CPOD) Service is in charge of providing the orbital and auxiliary products required by the PDGS (Payload Data Ground Segment). External orbit validation is regularly performed by comparing the CPOD Service orbits to orbit solutions provided by POD expert members of the Copernicus POD Quality Working Group (QWG). The orbit comparisons revealed systematic orbit offsets mainly in radial direction (approx. 3 cm). Although no independent observation technique (e.g. DORIS, SLR) is available to validate the GPS-derived orbit solutions, comparisons between the different antenna phase center variations and different reduced-dynamic orbit determination approaches used in the various software packages helped to detect the cause of the systematic offset. An error in the given geometry information about the satellite has been found. After correction of the geometry the orbit validation shows a significant reduction of the radial offset to below 5 mm. The 5 cm orbit accuracy requirement in 3D is fulfilled according to the results of the orbit comparisons between the different orbit solutions from the QWG.

Construction of a viral T2A-peptide based knock-in mouse model for enhanced Cre recombinase activity and fluorescent labeling of podocytes.

PubMed

Koehler, Sybille; Brähler, Sebastian; Braun, Fabian; Hagmann, Henning; Rinschen, Markus M; Späth, Martin R; Höhne, Martin; Wunderlich, F Thomas; Schermer, Bernhard; Benzing, Thomas; Brinkkoetter, Paul T

2017-06-01

Podocyte injury is a key event in glomerular disease leading to proteinuria and opening the path toward glomerular scarring. As a consequence, glomerular research strives to discover molecular mechanisms and signaling pathways affecting podocyte health. The hNphs2.Cre mouse model has been a valuable tool to manipulate podocyte-specific genes and to label podocytes for lineage tracing and purification. Here we designed a novel podocyte-specific tricistronic Cre mouse model combining codon improved Cre expression and fluorescent cell labeling with mTomato under the control of the endogenous Nphs2 promoter using viral T2A-peptides. Independent expression of endogenous podocin, codon improved Cre, and mTomato was confirmed by immunofluorescence, fluorescent activated cell sorting and protein analyses. Nphs2 pod.T2A.ciCre.T2A.mTomato/wild-type mice developed normally and did not show any signs of glomerular disease or off-target effects under basal conditions and in states of disease. Nphs2 pod.T2A.ciCre.T2A.mTomato/wild-type -mediated gene recombination was superior to conventional hNphs2.Cre mice-mediated gene recombination. Last, we compared Cre efficiency in a disease model by mating Nphs2 pod.T2A.ciCre.T2A.mTomato/wild-type and hNphs2.Cre mice to Phb2 fl/fl mice. The podocyte-specific Phb2 knockout by Nphs2 pod.T2A.ciCre.T2A.mTomato/wild-type mice resulted in an aggravated glomerular injury as compared to a podocyte-specific Phb2 gene deletion triggered by hNphs2.Cre. Thus, we generated the first tricistronic podocyte mouse model combining enhanced Cre recombinase efficiency and fluorescent labeling in podocytes without the need for additional matings with conventional reporter mouse lines. Copyright © 2016 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

A Comprehensive Phenotypic Investigation of the "Pod-Shattering Syndrome" in Common Bean.

PubMed

Murgia, Maria L; Attene, Giovanna; Rodriguez, Monica; Bitocchi, Elena; Bellucci, Elisa; Fois, Davide; Nanni, Laura; Gioia, Tania; Albani, Diego M; Papa, Roberto; Rau, Domenico

2017-01-01

Seed shattering in crops is a key domestication trait due to its relevance for seed dispersal, yield, and fundamental questions in evolution (e.g., convergent evolution). Here, we focused on pod shattering in common bean ( Phaseolus vulgaris L.), the most important legume crop for human consuption in the world. With this main aim, we developed a methodological pipeline that comprises a thorough characterization under field conditions, including also the chemical composition and histological analysis of the pod valves. The pipeline was developed based on the assumption that the shattering trait itself can be treated in principle as a "syndrome" (i.e., a set of correlated different traits) at the pod level. We characterized a population of 267 introgression lines that were developed ad-hoc to study shattering in common bean. Three main objectives were sought: (1) to dissect the shattering trait into its "components," of level (percentage of shattering pods per plant) and mode (percentage of pods with twisting or non-twisting valves); (2) to test whether shattering is associated to the chemical composition and/or the histological characteristics of the pod valves; and (3) to test the associations between shattering and other plant traits. We can conclude the following: Very high shattering levels can be achieved in different modes; shattering resistance is mainly a qualitative trait; and high shattering levels is correlated with high carbon and lignin contents of the pod valves and with specific histological charaterstics of the ventral sheath and the inner fibrous layer of the pod wall. Our data also suggest that shattering comes with a "cost," as it is associated with low pod size, low seed weight per pod, high pod weight, and low seed to pod-valves ratio; indeed, it can be more exaustively described as a syndrome at the pod level. Our work suggests that the valve chemical composition (i.e., carbon and lignin content) can be used for a high troughput phenotyping procedures for shattering phenotyping. Finally, we believe that the application of our pipeline will greatly facilitate comparative studies among legume crops, and gene tagging.

ArduiPod Box: a low-cost and open-source Skinner box using an iPod Touch and an Arduino microcontroller.

PubMed

Pineño, Oskar

2014-03-01

This article introduces the ArduiPod Box, an open-source device built using two main components (i.e., an iPod Touch and an Arduino microcontroller), developed as a low-cost alternative to the standard operant conditioning chamber, or "Skinner box." Because of its affordability, the ArduiPod Box provides an opportunity for educational institutions with small budgets seeking to set up animal laboratories for research and instructional purposes. A pilot experiment is also presented, which shows that the ArduiPod Box, in spite of its extraordinary simplicity, can be effectively used to study animal learning and behavior.

Concentrated liquid detergent pod ingestion in children.

PubMed

Sidhu, Natasha; Jaeger, Matthew W

2014-12-01

Concentrated liquid detergent pods are an emerging public health hazard, especially in pediatric patients. Ingestion is a more common route of exposure for liquid detergent pods compared with non-pod detergents and it tends to be associated with more severe adverse effects. We present 3 cases that demonstrate the varied clinical symptoms resulting from detergent pod ingestion. These cases not only demonstrate findings such as gastrointestinal and respiratory symptoms but also show more rare neurological symptoms. The cases highlight the dangers of concentrated liquid detergent pod ingestion. To help prevent further life-threatening injuries, there is a need for more consumer information and provider knowledge about the potential adverse complications.

Length Scales and Types of Heterogeneities Along the Deep Subduction Interface: Insights From an Exhumed Subduction Complex on Syros Island, Greece

NASA Astrophysics Data System (ADS)

Kotowski, A. J.; Behr, W. M.; Tong, X.; Lavier, L.

2017-12-01

The rheology of the deep subduction interface strongly influences the occurrence, recurrence, and migration of episodic tremor and slow slip (ETS) events. To better understand the environment of deep ETS, we characterize the length scales and types of rheological heterogeneities that decorate the deep interface using an exhumed subduction complex. The Cycladic Blueschist Unit on Syros, Greece, records Eocene subduction to 60 km, partial exhumation along the top of the slab, and final exhumation along Miocene detachment faults. The CBU reached 450-580˚C and 14-16 kbar, PT conditions similar to where ETS occurs in several modern subduction zones. Rheological heterogeneity is preserved in a range of rock types on Syros, with the most prominent type being brittle pods embedded within a viscous matrix. Prograde, blueschist-facies metabasalts show strong deformation fabrics characteristic of viscous flow; cm- to m-scale eclogitic lenses are embedded within them as massive, veined pods, foliated pods rotated with respect to the blueschist fabric, and attenuated, foliation-parallel lenses. Similar relationships are observed in blueschist-facies metasediments interpreted to have deformed during early exhumation. In these rocks, metabasalts form lenses ranging in size from m- to 10s of m and are distributed at the m-scale throughout the metasedimentary matrix. Several of the metamafic lenses, and the matrix rocks immediately adjacent to them, preserve multiple generations of dilational veins and shear fractures filled with quartz and high pressure minerals. These observations suggest that coupled brittle-viscous deformation under high fluid pressures may characterize the subduction interface in the deep tremor source region. To test this further, we modeled the behavior of an elasto-plastic pod in a viscous shear zone under high fluid pressures. Our models show that local stress concentrations around the pod are large enough to generate transient dilational shear at seismic strain rates. Scaling the model up to a typical source area for deep tremor suggests these heterogeneities may yield a seismic moment similar to those calculated for tremor bursts in modern subduction zones.

Incorporating New Technologies Into Toxicity Testing and Risk Assessment: Moving From 21st Century Vision to a Data-Driven Framework

PubMed Central

Thomas, Russell S.

2013-01-01

Based on existing data and previous work, a series of studies is proposed as a basis toward a pragmatic early step in transforming toxicity testing. These studies were assembled into a data-driven framework that invokes successive tiers of testing with margin of exposure (MOE) as the primary metric. The first tier of the framework integrates data from high-throughput in vitro assays, in vitro-to-in vivo extrapolation (IVIVE) pharmacokinetic modeling, and exposure modeling. The in vitro assays are used to separate chemicals based on their relative selectivity in interacting with biological targets and identify the concentration at which these interactions occur. The IVIVE modeling converts in vitro concentrations into external dose for calculation of the point of departure (POD) and comparisons to human exposure estimates to yield a MOE. The second tier involves short-term in vivo studies, expanded pharmacokinetic evaluations, and refined human exposure estimates. The results from the second tier studies provide more accurate estimates of the POD and the MOE. The third tier contains the traditional animal studies currently used to assess chemical safety. In each tier, the POD for selective chemicals is based primarily on endpoints associated with a proposed mode of action, whereas the POD for nonselective chemicals is based on potential biological perturbation. Based on the MOE, a significant percentage of chemicals evaluated in the first 2 tiers could be eliminated from further testing. The framework provides a risk-based and animal-sparing approach to evaluate chemical safety, drawing broadly from previous experience but incorporating technological advances to increase efficiency. PMID:23958734

Development, Verification and Use of Gust Modeling in the NASA Computational Fluid Dynamics Code FUN3D

NASA Technical Reports Server (NTRS)

Bartels, Robert E.

2012-01-01

This paper presents the implementation of gust modeling capability in the CFD code FUN3D. The gust capability is verified by computing the response of an airfoil to a sharp edged gust. This result is compared with the theoretical result. The present simulations will be compared with other CFD gust simulations. This paper also serves as a users manual for FUN3D gust analyses using a variety of gust profiles. Finally, the development of an Auto-Regressive Moving-Average (ARMA) reduced order gust model using a gust with a Gaussian profile in the FUN3D code is presented. ARMA simulated results of a sequence of one-minus-cosine gusts is shown to compare well with the same gust profile computed with FUN3D. Proper Orthogonal Decomposition (POD) is combined with the ARMA modeling technique to predict the time varying pressure coefficient increment distribution due to a novel gust profile. The aeroelastic response of a pitch/plunge airfoil to a gust environment is computed with a reduced order model, and compared with a direct simulation of the system in the FUN3D code. The two results are found to agree very well.

A Deep Learning based Approach to Reduced Order Modeling of Fluids using LSTM Neural Networks

NASA Astrophysics Data System (ADS)

Mohan, Arvind; Gaitonde, Datta

2017-11-01

Reduced Order Modeling (ROM) can be used as surrogates to prohibitively expensive simulations to model flow behavior for long time periods. ROM is predicated on extracting dominant spatio-temporal features of the flow from CFD or experimental datasets. We explore ROM development with a deep learning approach, which comprises of learning functional relationships between different variables in large datasets for predictive modeling. Although deep learning and related artificial intelligence based predictive modeling techniques have shown varied success in other fields, such approaches are in their initial stages of application to fluid dynamics. Here, we explore the application of the Long Short Term Memory (LSTM) neural network to sequential data, specifically to predict the time coefficients of Proper Orthogonal Decomposition (POD) modes of the flow for future timesteps, by training it on data at previous timesteps. The approach is demonstrated by constructing ROMs of several canonical flows. Additionally, we show that statistical estimates of stationarity in the training data can indicate a priori how amenable a given flow-field is to this approach. Finally, the potential and limitations of deep learning based ROM approaches will be elucidated and further developments discussed.

14 CFR 25.1182 - Nacelle areas behind firewalls, and engine pod attaching structures containing flammable fluid...

Code of Federal Regulations, 2011 CFR

2011-01-01

... pod attaching structures containing flammable fluid lines. 25.1182 Section 25.1182 Aeronautics and..., and engine pod attaching structures containing flammable fluid lines. (a) Each nacelle area immediately behind the firewall, and each portion of any engine pod attaching structure containing flammable...

14 CFR 25.1182 - Nacelle areas behind firewalls, and engine pod attaching structures containing flammable fluid...

Code of Federal Regulations, 2010 CFR

2010-01-01

... pod attaching structures containing flammable fluid lines. 25.1182 Section 25.1182 Aeronautics and..., and engine pod attaching structures containing flammable fluid lines. (a) Each nacelle area immediately behind the firewall, and each portion of any engine pod attaching structure containing flammable...

Plant extracts as phytogenic additives considering intake, digestibility, and feeding behavior of sheep.

PubMed

da Silva, Camila Sousa; de Souza, Evaristo Jorge Oliveira; Pereira, Gerfesson Felipe Cavalcanti; Cavalcante, Edwilka Oliveira; de Lima, Ewerton Ivo Martins; Torres, Thaysa Rodrigues; da Silva, José Ricardo Coelho; da Silva, Daniel Cézar

2017-02-01

The objective was to evaluate the intake, digestibility, and ingestive sheep behavior with feeding phytogenic additives derived from plant extracts. Five non-emasculated sheep without defined breed at 28 ± 1.81 kg initial body weight and 6 months age were used. Treatments consisted of administering four phytogenic additives from the garlic extracts, coriander seed, oregano, and pods of mesquite, plus a control treatment (without additive). The ration was composed of Tifton 85 hay grass, corn, soybean meal, and mineral salt. As experimental design, we used a 5 × 5 Latin square design (five treatments and five periods). The data were analyzed through the mixed model through the procedure PROC MIXED of software Systems Statistical Analysis version 9.1, with comparation analysis between the treatment without additive (control) with phytogenic additives produced from vegetable extracts of mesquite pod, of coriander seed, the bulb of garlic, and the oregano leaves. There were no significant differences for the nutrient intake and ingestive behavior patterns. However, the additive intake derived from mesquite pods and coriander extracts provided an increase in digestibility. Extracts from garlic, coriander, and mesquite pods can be used as phytogenic additives in feeding sheep.

A study on risk factors and diagnostic efficiency of posthepatectomy liver failure in the nonobstructive jaundice.

PubMed

Wang, He; Lu, Shi-Chun; He, Lei; Dong, Jia-Hong

2018-02-01

Liver failure remains as the most common complication and cause of death after hepatectomy, and continues to be a challenge for doctors.t test and χ test were used for single factor analysis of data-related variables, then results were introduced into the model to undergo the multiple factors logistic regression analysis. Pearson correlation analysis was performed for related postoperative indexes, and a diagnostic evaluation was performed using the receiver operating characteristic (ROC) of postoperative indexes.Differences in age, body mass index (BMI), portal vein hypertension, bile duct cancer, total bilirubin, alkaline phosphatase (ALP), gamma-glutamyl transpeptidase (GGT), operation time, cumulative portal vein occlusion time, intraoperative blood volume, residual liver volume (RLV)/entire live rvolume, ascites volume at postoperative day (POD)3, supplemental albumin amount at POD3, hospitalization time after operation, and the prothrombin activity (PTA) were statistically significant. Furthermore, there were significant differences in total bilirubin and the supplemental albumin amount at POD3. ROC analysis of the average PTA, albumin amounts, ascites volume at POD3, and their combined diagnosis were performed, which had diagnostic value for postoperative liver failure (area under the curve (AUC): 0.895, AUC: 0.798, AUC: 0.775, and AUC: 0.903).Preoperative total bilirubin level and the supplemental albumin amount at POD3 were independent risk factors. PTA can be used as the index of postoperative liver failure, and the combined diagnosis of the indexes can improve the early prediction of postoperative liver failure.

A deep transcriptomic analysis of pod development in the vanilla orchid (Vanilla planifolia).

PubMed

Rao, Xiaolan; Krom, Nick; Tang, Yuhong; Widiez, Thomas; Havkin-Frenkel, Daphna; Belanger, Faith C; Dixon, Richard A; Chen, Fang

2014-11-07

Pods of the vanilla orchid (Vanilla planifolia) accumulate large amounts of the flavor compound vanillin (3-methoxy, 4-hydroxy-benzaldehyde) as a glucoside during the later stages of their development. At earlier stages, the developing seeds within the pod synthesize a novel lignin polymer, catechyl (C) lignin, in their coats. Genomic resources for determining the biosynthetic routes to these compounds and other flavor components in V. planifolia are currently limited. Using next-generation sequencing technologies, we have generated very large gene sequence datasets from vanilla pods at different times of development, and representing different tissue types, including the seeds, hairs, placental and mesocarp tissues. This developmental series was chosen as being the most informative for interrogation of pathways of vanillin and C-lignin biosynthesis in the pod and seed, respectively. The combined 454/Illumina RNA-seq platforms provide both deep sequence coverage and high quality de novo transcriptome assembly for this non-model crop species. The annotated sequence data provide a foundation for understanding multiple aspects of the biochemistry and development of the vanilla bean, as exemplified by the identification of candidate genes involved in lignin biosynthesis. Our transcriptome data indicate that C-lignin formation in the seed coat involves coordinate expression of monolignol biosynthetic genes with the exception of those encoding the caffeoyl coenzyme A 3-O-methyltransferase for conversion of caffeoyl to feruloyl moieties. This database provides a general resource for further studies on this important flavor species.

Simplified Predictive Models for CO2 Sequestration Performance Assessment

NASA Astrophysics Data System (ADS)

Mishra, Srikanta; RaviGanesh, Priya; Schuetter, Jared; Mooney, Douglas; He, Jincong; Durlofsky, Louis

2014-05-01

We present results from an ongoing research project that seeks to develop and validate a portfolio of simplified modeling approaches that will enable rapid feasibility and risk assessment for CO2 sequestration in deep saline formation. The overall research goal is to provide tools for predicting: (a) injection well and formation pressure buildup, and (b) lateral and vertical CO2 plume migration. Simplified modeling approaches that are being developed in this research fall under three categories: (1) Simplified physics-based modeling (SPM), where only the most relevant physical processes are modeled, (2) Statistical-learning based modeling (SLM), where the simulator is replaced with a "response surface", and (3) Reduced-order method based modeling (RMM), where mathematical approximations reduce the computational burden. The system of interest is a single vertical well injecting supercritical CO2 into a 2-D layered reservoir-caprock system with variable layer permeabilities. In the first category (SPM), we use a set of well-designed full-physics compositional simulations to understand key processes and parameters affecting pressure propagation and buoyant plume migration. Based on these simulations, we have developed correlations for dimensionless injectivity as a function of the slope of fractional-flow curve, variance of layer permeability values, and the nature of vertical permeability arrangement. The same variables, along with a modified gravity number, can be used to develop a correlation for the total storage efficiency within the CO2 plume footprint. In the second category (SLM), we develop statistical "proxy models" using the simulation domain described previously with two different approaches: (a) classical Box-Behnken experimental design with a quadratic response surface fit, and (b) maximin Latin Hypercube sampling (LHS) based design with a Kriging metamodel fit using a quadratic trend and Gaussian correlation structure. For roughly the same number of simulations, the LHS-based meta-model yields a more robust predictive model, as verified by a k-fold cross-validation approach. In the third category (RMM), we use a reduced-order modeling procedure that combines proper orthogonal decomposition (POD) for reducing problem dimensionality with trajectory-piecewise linearization (TPWL) for extrapolating system response at new control points from a limited number of trial runs ("snapshots"). We observe significant savings in computational time with very good accuracy from the POD-TPWL reduced order model - which could be important in the context of history matching, uncertainty quantification and optimization problems. The paper will present results from our ongoing investigations, and also discuss future research directions and likely outcomes. This work was supported by U.S. Department of Energy National Energy Technology Laboratory award DE-FE0009051 and Ohio Department of Development grant D-13-02.

75 FR 55997 - Carbaryl; Order Denying NRDC's Objections and Requests for Hearing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

... Agency's application of the BMD approach as a scientifically supportable method for deriving PODs in... application methods -- all pet uses (dusts and liquids) except collars, aerosol products for various uses... registrants that these uses and application methods must be deleted from their carbaryl product labels. EPA...

76 FR 30329 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

...: Termination of Morgantown POD Construction Agreement to be effective 7/ 4/2011. Filed Date: 05/18/2011... Filing in Response to the September 3, 2010 Order Approving Petition and Directing Compliance Filing.... The filings in the above proceedings are accessible in the Commission's eLibrary system by clicking on...

Assessment of MMP-2/-9 expression by fluorescence endoscopy for evaluation of anastomotic healing in a murine model of anastomotic leakage

PubMed Central

Twardy, Vanessa; Becker, Felix; Geyer, Christiane; Schwegmann, Katrin; Mohr, Annika; Faust, Andreas

2018-01-01

Background Disturbance of intestinal wound closure leads to insufficient anastomotic healing and is associated with considerable morbidity following colorectal resections. Matrix metalloproteinases (MMPs) play a crucial role in regulation of wound closure. Here fluorescence endoscopy was evaluated for assessment of MMP-2/-9 expression during failed intestinal anastomotic healing. Methods Distal colonic anastomoses were performed as a model for disturbed healing in 36 Balb/c mice. Healing was evaluated endoscopically, macroscopically, and histologically after 1, 3 and 5 days. For detection of MMP-2/-9 expression fluorescence endoscopy (FE) was used following i.v.-administration of a Cy5.5-labeled MMP-2/-9 specific tracer. FE was complemented by quantification of the fluorescence signal using the MS-FX PRO Optical Imaging System. An overall leakage score was calculated and correlated with the results of FE. Results With increasing incidence of anastomotic leakage from POD1 (17%) to POD5 (83%) the uptake of the MMP tracer gradually increased (signal-to-noise ratio (SNR), POD1: 17.91 ± 1.251 vs. POD3: 30.56 ± 3.03 vs. POD5: 44.8 ± 4.473, P<0.0001). Mice with defective anastomotic healing showed significantly higher uptake compared to non-defective (SNR: 37.37± 3.63 vs. 26.16± 3.635, P = 0.0369). White light endoscopy and FE allowed evaluation of anastomotic healing and visualization of mucosal MMPs in vivo. Using FE based detection of MMPs in the anastomosis, an overall positive predictive value of 71.4% and negative predictive value of 66.6% was calculated for detection of anastomotic leakage. Conclusion During disturbed anastomotic healing increased expression of MMP-2/-9 was observed in the anastomotic tissue. Fluorescence endoscopy for detection of MMP-2/-9 during the healing process might be a promising tool for early identification of anastomotic leakage. PMID:29566031

Assessment of MMP-2/-9 expression by fluorescence endoscopy for evaluation of anastomotic healing in a murine model of anastomotic leakage.

PubMed

Neumann, Philipp-Alexander; Twardy, Vanessa; Becker, Felix; Geyer, Christiane; Schwegmann, Katrin; Mohr, Annika; Faust, Andreas; Lenz, Philipp; Rijcken, Emile

2018-01-01

Disturbance of intestinal wound closure leads to insufficient anastomotic healing and is associated with considerable morbidity following colorectal resections. Matrix metalloproteinases (MMPs) play a crucial role in regulation of wound closure. Here fluorescence endoscopy was evaluated for assessment of MMP-2/-9 expression during failed intestinal anastomotic healing. Distal colonic anastomoses were performed as a model for disturbed healing in 36 Balb/c mice. Healing was evaluated endoscopically, macroscopically, and histologically after 1, 3 and 5 days. For detection of MMP-2/-9 expression fluorescence endoscopy (FE) was used following i.v.-administration of a Cy5.5-labeled MMP-2/-9 specific tracer. FE was complemented by quantification of the fluorescence signal using the MS-FX PRO Optical Imaging System. An overall leakage score was calculated and correlated with the results of FE. With increasing incidence of anastomotic leakage from POD1 (17%) to POD5 (83%) the uptake of the MMP tracer gradually increased (signal-to-noise ratio (SNR), POD1: 17.91 ± 1.251 vs. POD3: 30.56 ± 3.03 vs. POD5: 44.8 ± 4.473, P<0.0001). Mice with defective anastomotic healing showed significantly higher uptake compared to non-defective (SNR: 37.37± 3.63 vs. 26.16± 3.635, P = 0.0369). White light endoscopy and FE allowed evaluation of anastomotic healing and visualization of mucosal MMPs in vivo. Using FE based detection of MMPs in the anastomosis, an overall positive predictive value of 71.4% and negative predictive value of 66.6% was calculated for detection of anastomotic leakage. During disturbed anastomotic healing increased expression of MMP-2/-9 was observed in the anastomotic tissue. Fluorescence endoscopy for detection of MMP-2/-9 during the healing process might be a promising tool for early identification of anastomotic leakage.

Forecasting Dust Storms Using the CARMA-Dust Model and MM5 Weather Data

NASA Astrophysics Data System (ADS)

Barnum, B. H.; Winstead, N. S.; Wesely, J.; Hakola, A.; Colarco, P.; Toon, O. B.; Ginoux, P.; Brooks, G.; Hasselbarth, L. M.; Toth, B.; Sterner, R.

2002-12-01

An operational model for the forecast of dust storms in Northern Africa, the Middle East and Southwest Asia has been developed for the United States Air Force Weather Agency (AFWA). The dust forecast model uses the 5th generation Penn State Mesoscale Meteorology Model (MM5), and a modified version of the Colorado Aerosol and Radiation Model for Atmospheres (CARMA). AFWA conducted a 60 day evaluation of the dust model to look at the model's ability to forecast dust storms for short, medium and long range (72 hour) forecast periods. The study used satellite and ground observations of dust storms to verify the model's effectiveness. Each of the main mesoscale forecast theaters was broken down into smaller sub-regions for detailed analysis. The study found the forecast model was able to forecast dust storms in Saharan Africa and the Sahel region with an average Probability of Detection (POD)exceeding 68%, with a 16% False Alarm Rate (FAR). The Southwest Asian theater had average POD's of 61% with FAR's averaging 10%.

SR-71 wind tunnel scale model with LASRE pod

NASA Technical Reports Server (NTRS)

1996-01-01

This is a photo of the SR-71 scale wind tunnel model showing the Linear Aerospike SR Experiment (LASRE) pod attachment location. The model was on display for the LASRE fit-check at the Lockheed Martin Skunkworks on Feb. 15, 1996, in Palmdale, California. The LASRE experiment was designed to provide in-flight data to help Lockheed Martin evaluate the aerodynamic characteristics and the handling of the SR-71 linear aerospike experiment configuration. The goal of the project was to provide in-flight data to help Lockheed Martin validate the computational predictive tools it was using to determine the aerodynamic performance of a future reusable launch vehicle. The joint NASA, Rocketdyne (now part of Boeing), and Lockheed Martin Linear Aerospike SR-71 Experiment (LASRE) completed seven initial research flights at Dryden Flight Research Center. Two initial flights were used to determine the aerodynamic characteristics of the LASRE apparatus (pod) on the back of the SR-71. Five later flights focused on the experiment itself. Two were used to cycle gaseous helium and liquid nitrogen through the experiment to check its plumbing system for leaks and to test engine operational characteristics. During the other three flights, liquid oxygen was cycled through the engine. Two engine hot-firings were also completed on the ground. A final hot-fire test flight was canceled because of liquid oxygen leaks in the test apparatus. The LASRE experiment itself was a 20-percent-scale, half-span model of a lifting body shape (X-33) without the fins. It was rotated 90 degrees and equipped with eight thrust cells of an aerospike engine and was mounted on a housing known as the 'canoe,' which contained the gaseous hydrogen, helium, and instrumentation gear. The model, engine, and canoe together were called a 'pod.' The experiment focused on determining how a reusable launch vehicle's engine flume would affect the aerodynamics of its lifting-body shape at specific altitudes and speeds. The interaction of the aerodynamic flow with the engine plume could create drag; design refinements looked at minimizing this interaction. The entire pod was 41 feet in length and weighed 14,300 pounds. The experimental pod was mounted on one of NASA's SR-71s, which were at that time on loan to NASA from the U.S. Air Force. Lockheed Martin may use the information gained from the LASRE and X-33 Advanced Technology Demonstrator Projects to develop a potential future reusable launch vehicle. NASA and Lockheed Martin were partners in the X-33 program through a cooperative agreement. The goal of that program was to enable significant reductions in the cost of access to space and to promote creation and delivery of new space services and activities to improve the United States's economic competitiveness. In March 2001, however, NASA cancelled the X-33 program.

Particle protection capability of SEMI-compliant EUV-pod carriers

NASA Astrophysics Data System (ADS)

Huang, George; He, Long; Lystad, John; Kielbaso, Tom; Montgomery, Cecilia; Goodwin, Frank

2010-04-01

With the projected rollout of pre-production extreme ultraviolet lithography (EUVL) scanners in 2010, EUVL pilot line production will become a reality in wafer fabrication companies. Among EUVL infrastructure items that must be ready, EUV mask carriers remain critical. To keep non-pellicle EUV masks free from particle contamination, an EUV pod concept has been extensively studied. Early prototypes demonstrated nearly particle-free results at a 53 nm PSL equivalent inspection sensitivity during EUVL mask robotic handling, shipment, vacuum pump-purge, and storage. After the passage of SEMI E152, which specifies the EUV pod mechanical interfaces, standards-compliant EUV pod prototypes, including a production version inner pod and prototype outer pod, were built and tested. Their particle protection capability results are reported in this paper. A state-of-the-art blank defect inspection tool was used to quantify their defect protection capability during mask robotic handling, shipment, and storage tests. To ensure the availability of an EUV pod for 2010 pilot production, the progress and preliminary test results of pre-production EUV outer pods are reported as well.

Molecular cloning of peroxidase cDNAs from dehydration-treated fibrous roots of sweetpotato and their differential expression in response to stress.

PubMed

Kim, Yun-Hee; Yang, Kyoung-Sil; Kim, Cha Young; Ryu, Sun-Hwa; Song, Wan-Keun; Kwon, Suk-Yoon; Lee, Haeng-Soon; Bang, Jae-Wook; Kwak, Sang-Soo

2008-03-31

Three peroxidase (POD) cDNAs were isolated from dehydration-treated fibrous roots of sweetpotato (Ipomoea batatas) plant via the screening of a cDNA library, and their expressions were assessed to characterize functions of each POD in relation to environmental stress. Three PODs were divided into two groups, designated the basic PODs (swpb4, swpb5) and the anionic PODs (swpa7), on the basis of the pI values of mature proteins. Fluorescence microscope analysis indicated that three PODs are secreted into the extracellular space. RTPCR analysis revealed that POD genes have diverse expression patterns in a variety of plant tissues. Swpb4 was abundantly expressed in stem tissues, whereas the expression levels of swpb5 and swpa7 transcripts were high in fibrous and thick pigmented roots. Swpb4 and swpa7 showed abundant expression levels in suspension cultured cells. Three POD genes responded differently in the leaf and fibrous roots in response to a variety of stresses including dehydration, temperature stress, stress-associated chemicals, and pathogenic bacteria.

Cell-penetrating peptide for enhanced delivery of nucleic acids and drugs to ocular tissues including retina and cornea.

PubMed

Johnson, Leslie N; Cashman, Siobhan M; Kumar-Singh, Rajendra

2008-01-01

As in other organ systems, gene and drug delivery to ocular tissues such as the retina and cornea is hampered by inefficient penetration of therapeutic molecules across the plasma membrane. We describe the use of a novel peptide for ocular delivery (POD) with protein transduction properties, for delivery of small and large molecules across the plasma membrane. POD enters cells within 5 minutes in a temperature dependent manner. POD can compact and deliver plasmid DNA, achieving transgene expression in >50% of human embryonic retinoblasts. Delivery of small interfering RNA (siRNA) duplexes to cells using POD, allowed for silencing of transgene expression by >50%. POD could also be used to deliver quantum dots in vitro and in vivo. Upon ocular delivery, POD rapidly entered neural retina and localized to retinal pigment epithelium (RPE), photoreceptor, and ganglion cells. Additionally, POD was able to enter corneal epithelium, sclera, choroid, and the dura of the optic nerve via topical application. POD also functions as a bacteriostatic, a useful property for a carrier of molecules to post mitotic neural ocular tissues.

Application of a deep-learning method to the forecast of daily solar flare occurrence using Convolution Neural Network

NASA Astrophysics Data System (ADS)

Shin, Seulki; Moon, Yong-Jae; Chu, Hyoungseok

2017-08-01

As the application of deep-learning methods has been succeeded in various fields, they have a high potential to be applied to space weather forecasting. Convolutional neural network, one of deep learning methods, is specialized in image recognition. In this study, we apply the AlexNet architecture, which is a winner of Imagenet Large Scale Virtual Recognition Challenge (ILSVRC) 2012, to the forecast of daily solar flare occurrence using the MatConvNet software of MATLAB. Our input images are SOHO/MDI, EIT 195Å, and 304Å from January 1996 to December 2010, and output ones are yes or no of flare occurrence. We select training dataset from Jan 1996 to Dec 2000 and from Jan 2003 to Dec 2008. Testing dataset is chosen from Jan 2001 to Dec 2002 and from Jan 2009 to Dec 2010 in order to consider the solar cycle effect. In training dataset, we randomly select one fifth of training data for validation dataset to avoid the overfitting problem. Our model successfully forecasts the flare occurrence with about 0.90 probability of detection (POD) for common flares (C-, M-, and X-class). While POD of major flares (M- and X-class) forecasting is 0.96, false alarm rate (FAR) also scores relatively high(0.60). We also present several statistical parameters such as critical success index (CSI) and true skill statistics (TSS). Our model can immediately be applied to automatic forecasting service when image data are available.

The scaffolding and signaling functions of a localization factor impact polar development

PubMed Central

Curtis, Patrick D.; Quardokus, Ellen M.; Lawler, Melanie L.; Guo, Xiaoyun; Klein, David; Chen, Joseph C.; Arnold, Randy J.; Brun, Yves V.

2012-01-01

SUMMARY In the differentiating alphaproteobacterium Caulobacter crescentus, organelle synthesis at cell poles is critical to forming different progeny after cell division. Coordination of polar organelle synthesis, including pili and holdfast, and flagellum ejection, is mediated in part by the scaffolding protein PodJ. At the time of cell division, PodJ undergoes regulated processing to a short form that persists at the flagellar pole of swarmer cells. This study analyzes how PodJ’s role in structural and signaling protein localization impacts organelle synthesis. A PodJ mutant with an internal deletion exhibits reduced sensitivity to pili-tropic phage ΦCbK, resulting from reduced pilA gene expression, which can be linked to altered signaling protein localization. The phage sensitivity defect of a ΔpodJ mutant can be partially suppressed by ectopic pilA expression. Induction of PodJ processing, by manipulation of podJ itself or controlled perP expression, resulted in decreased pilus biogenesis and, when coupled with a podJ mutation that reduced pilA expression, led to complete loss of phage sensitivity. As a whole, the results show that PodJ’s scaffolding role for structural and signaling proteins both contribute to flagellar pole organelle development. PMID:22512778

Interrelationships Between Receiver/Relative Operating Characteristics Display, Binomial, Logit, and Bayes' Rule Probability of Detection Methodologies

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2014-01-01

Unknown risks are introduced into failure critical systems when probability of detection (POD) capabilities are accepted without a complete understanding of the statistical method applied and the interpretation of the statistical results. The presence of this risk in the nondestructive evaluation (NDE) community is revealed in common statements about POD. These statements are often interpreted in a variety of ways and therefore, the very existence of the statements identifies the need for a more comprehensive understanding of POD methodologies. Statistical methodologies have data requirements to be met, procedures to be followed, and requirements for validation or demonstration of adequacy of the POD estimates. Risks are further enhanced due to the wide range of statistical methodologies used for determining the POD capability. Receiver/Relative Operating Characteristics (ROC) Display, simple binomial, logistic regression, and Bayes' rule POD methodologies are widely used in determining POD capability. This work focuses on Hit-Miss data to reveal the framework of the interrelationships between Receiver/Relative Operating Characteristics Display, simple binomial, logistic regression, and Bayes' Rule methodologies as they are applied to POD. Knowledge of these interrelationships leads to an intuitive and global understanding of the statistical data, procedural and validation requirements for establishing credible POD estimates.

Peroxidases, lignin and anatomy during in vitro and ex vitro rooting of gardenia (Gardenia jasminoides Ellis) microshoots.

PubMed

Hatzilazarou, Stefanos P; Syros, Thomas D; Yupsanis, Traianos A; Bosabalidis, Artemios M; Economou, Athanasios S

2006-07-01

In vitro and ex vitro rooting of gardenia (Gardenia jasminoides Ellis) microshoots with or without indolic-3-butyric acid (IBA) was studied in order to improve acclimatization of microplants after root formation and transplantation. Peroxidase (POD) activity and isoforms, lignin content and anatomical observations were evaluated in the course of the three interdependent phases (induction, initiation and expression) of microshoot rooting. Microshoots treated or not treated with IBA achieved high rooting percentages both in vitro and ex vitro. At the end of the 2-week acclimatization period, the percentage of surviving microplants ranged from 80% to 100%, for in vitro and ex vitro rooted microshoots, respectively. Microshoots rooted in vitro and ex vitro showed a relationship between rooting and POD activity but in a different time course. It appeared that root formation occurred after the microshoots had reached and passed a peak of maximum enzyme activity. In all treatments, electrophoretic analysis (native PAGE) of PODs revealed the appearance of one anionic and three cationic POD isoforms (C(1), C(3) and C(4)). An additional cationic POD isoform (C(2)) appeared only in the ex vitro rooting. The lignin content was similar in microshoots rooted both in vitro and ex vitro. The sequential anatomical changes during the rooting process were similar in both in vitro and ex vitro rooting treatments. In the case of in vitro rooting, pith cells had vacuoles entirely filled with a dark substance, while in the case of ex vitro rooting, pith cells contained many amyloplasts. The origin of the adventitious roots, in both rooting conditions, was located in the cambial ring. Roots with organized tissue systems emerged from the microshoot stem 10-14 days after the root induction treatments; on day 10 for rooting in vitro, while a 4-day delay was noted in microshoots rooted ex vitro.

Ozone risk assessment in three oak species as affected by soil water availability.

PubMed

Hoshika, Yasutomo; Moura, Barbara; Paoletti, Elena

2018-03-01

To derive ozone (O 3 ) dose-response relationships for three European oak species (Quercus ilex, Quercus pubescens, and Quercus robur) under a range of soil water availability, an experiment was carried out with 2-year-old potted seedlings exposed to three levels of water availability in the soil and three levels of O 3 pollution for one growing season in an ozone free-air controlled exposure (FACE) facility. Total biomass losses were estimated relative to a hypothetical clean air at the pre-industrial age, i.e., at 10 ppb as daily average (M24). A stomatal conductance model was parameterized with inputs from the three species for calculating the stomatal O 3 flux. Exposure-based (M24, W126, and AOT40) and flux-based (phytotoxic O 3 dose (POD) 0-3 ) dose-response relationships were estimated and critical levels (CL) were calculated for a 5% decline of total biomass. Results show that water availability can significantly affect O 3 risk assessment. In fact, dose-response relationships calculated per individual species at each water availability level resulted in very different CLs and best metrics. In a simplified approach where species were aggregated on the basis of their O 3 sensitivity, the best metric was POD 0.5 , with a CL of 6.8 mmol m -2 for the less O 3 -sensitive species Q. ilex and Q. pubescens and of 3.5 mmol m -2 for the more O 3 -sensitive species Q. robur. The performance of POD 0 , however, was very similar to that of POD 0.5 , and thus a CL of 6.9 mmol m -2 POD 0 and 3.6 mmol m -2 POD 0 for the less and more O 3 -sensitive oak species may be also recommended. These CLs can be applied to oak ecosystems at variable water availability in the soil. We conclude that POD y is able to reconcile the effects of O 3 and soil water availability on species-specific oak productivity.

Survey of college students on iPod use and hearing health.

PubMed

Danhauer, Jeffrey L; Johnson, Carole E; Byrd, Anne; DeGood, Laura; Meuel, Caitlin; Pecile, Angela; Koch, Lindsey L

2009-01-01

The popularity of personal listening devices (PLDs) including iPods has increased dramatically over the past decade. PLDs allow users to listen to music uninterrupted for prolonged periods and at levels that may pose a risk for hearing loss in some listeners, particularly those using earbud earphones that fail to attenuate high ambient noise levels and necessitate increasing volume for acoustic enjoyment. Earlier studies have documented PLD use by teenagers and adults, but omitted college students, which represent a large segment of individuals who use these devices. This study surveyed college students' knowledge about, experiences with, attitudes toward, and practices and preferences for hearing health and use of iPods and/or other PLDs. The study was designed to help determine the need, content, and preferred format for educational outreach campaigns regarding safe iPod use to college students. An 83-item questionnaire was designed and used to survey college students' knowledge about, experiences with, attitudes toward, and practices/preferences for hearing health and PLD use. The questionnaire assessed Demographics and Knowledge of Hearing Health, iPod Users' Practices and Preferences, Attitudes toward iPod Use, and Reasons for iPod Use. Generally, most college students were knowledgeable about hearing health but could use information about signs of and how to prevent hearing loss. Two-thirds of these students used iPods, but not at levels or for durations that should pose excessive risks for hearing loss when listening in quiet environments. However, most iPod users could be at risk for hearing loss given a combination of common practices. Most of these college students should not be at great risk of hearing loss from their iPods when used conscientiously. Some concern is warranted for a small segment of these students who seemed to be most at risk because they listened to their iPods at high volume levels for long durations using earbuds, and reported that they may already have hearing loss due to their iPods.

Transcriptome Analyses Reveal Candidate Pod Shattering-Associated Genes Involved in the Pod Ventral Sutures of Common Vetch (Vicia sativa L.)

PubMed Central

Dong, Rui; Dong, Deke; Luo, Dong; Zhou, Qiang; Chai, Xutian; Zhang, Jiyu; Xie, Wengang; Liu, Wenxian; Dong, Yang; Wang, Yanrong; Liu, Zhipeng

2017-01-01

The seed dispersion caused by pod shattering is a form of propagation used by many wild species. Loss of seeds from pod shattering is frequent in the common vetch (Vicia sativa L.), an important self-pollinating annual forage legume. However, pod shattering is one of the most important defects that limits the reproduction of the vetch in the field and the usage as a leguminous forage crop. To better understand the vetch pod shattering mechanism, we used high-throughput RNA sequencing to assess the global changes in the transcriptomes of the pod ventral sutures of shattering-susceptible and shattering-resistant vetch accessions screened from 541 vetch germplasms. A total of 1,285 significantly differentially expressed unigenes (DEGs) were detected, including 575 up-regulated unigenes and 710 down-regulated unigenes. Analyses of Gene Ontology and KEGG metabolic enrichment pathways of 1,285 DEGs indicated that 22 DEGs encoding cell wall modifications and hydrolases associated with pod shattering were highly expressed in shattering-susceptible accessions. These genes were mainly enriched in “hydrolase activity,” “cytoplasm,” and “carbohydrate metabolic process” systems. These cell wall modifications and hydrolases genes included β-glucosidase and endo-polygalacturonase, which work together to break down the glycosidic bonds of pectin and cellulose, and to promote the dissolution and disappearance of the cell wall in the ventral suture of the pod and make the pod more susceptible to shattering. We demonstrated the differences in gene transcription levels between the shattering-susceptible and shattering-resistant vetch accessions for the first time and our results provided valuable information for the identifying and characterizing of pod shattering regulation networks in vetch. This information may facilitate the future identification of pod shattering-related genes and their underlying molecular mechanisms in the common vetch. PMID:28496452

The next generation of low-cost personal air quality sensors for quantitative exposure monitoring

NASA Astrophysics Data System (ADS)

Piedrahita, R.; Xiang, Y.; Masson, N.; Ortega, J.; Collier, A.; Jiang, Y.; Li, K.; Dick, R. P.; Lv, Q.; Hannigan, M.; Shang, L.

2014-10-01

Advances in embedded systems and low-cost gas sensors are enabling a new wave of low-cost air quality monitoring tools. Our team has been engaged in the development of low-cost, wearable, air quality monitors (M-Pods) using the Arduino platform. These M-Pods house two types of sensors - commercially available metal oxide semiconductor (MOx) sensors used to measure CO, O3, NO2, and total VOCs, and NDIR sensors used to measure CO2. The MOx sensors are low in cost and show high sensitivity near ambient levels; however they display non-linear output signals and have cross-sensitivity effects. Thus, a quantification system was developed to convert the MOx sensor signals into concentrations. We conducted two types of validation studies - first, deployments at a regulatory monitoring station in Denver, Colorado, and second, a user study. In the two deployments (at the regulatory monitoring station), M-Pod concentrations were determined using collocation calibrations and laboratory calibration techniques. M-Pods were placed near regulatory monitors to derive calibration function coefficients using the regulatory monitors as the standard. The form of the calibration function was derived based on laboratory experiments. We discuss various techniques used to estimate measurement uncertainties. The deployments revealed that collocation calibrations provide more accurate concentration estimates than laboratory calibrations. During collocation calibrations, median standard errors ranged between 4.0-6.1 ppb for O3, 6.4-8.4 ppb for NO2, 0.28-0.44 ppm for CO, and 16.8 ppm for CO2. Median signal to noise (S / N) ratios for the M-Pod sensors were higher than the regulatory instruments: for NO2, 3.6 compared to 23.4; for O3, 1.4 compared to 1.6; for CO, 1.1 compared to 10.0; and for CO2, 42.2 compared to 300-500. By contrast, lab calibrations added bias and made it difficult to cover the necessary range of environmental conditions to obtain a good calibration. A separate user study was also conducted to assess uncertainty estimates and sensor variability. In this study, 9 M-Pods were calibrated via collocation multiple times over 4 weeks, and sensor drift was analyzed, with the result being a calibration function that included baseline drift. Three pairs of M-Pods were deployed, while users individually carried the other three. The user study suggested that inter-M-Pod variability between paired units was on the same order as calibration uncertainty; however, it is difficult to make conclusions about the actual personal exposure levels due to the level of user engagement. The user study provided real-world sensor drift data, showing limited CO drift (under -0.05 ppm day-1), and higher for O3 (-2.6 to 2.0 ppb day-1), NO2 (-1.56 to 0.51 ppb day-1), and CO2 (-4.2 to 3.1 ppm day-1). Overall, the user study confirmed the utility of the M-Pod as a low-cost tool to assess personal exposure.

Simulation supported POD for RT test case-concept and modeling

NASA Astrophysics Data System (ADS)

Gollwitzer, C.; Bellon, C.; Deresch, A.; Ewert, U.; Jaenisch, G.-R.; Zscherpel, U.; Mistral, Q.

2012-05-01

Within the framework of the European project PICASSO, the radiographic simulator aRTist (analytical Radiographic Testing inspection simulation tool) developed by BAM has been extended for reliability assessment of film and digital radiography. NDT of safety relevant components of aerospace industry requires the proof of probability of detection (POD) of the inspection. Modeling tools can reduce the expense of such extended, time consuming NDT trials, if the result of simulation fits to the experiment. Our analytic simulation tool consists of three modules for the description of the radiation source, the interaction of radiation with test pieces and flaws, and the detection process with special focus on film and digital industrial radiography. It features high processing speed with near-interactive frame rates and a high level of realism. A concept has been developed as well as a software extension for reliability investigations, completed by a user interface for planning automatic simulations with varying parameters and defects. Furthermore, an automatic image analysis procedure is included to evaluate the defect visibility. The radiographic modeling from 3D CAD of aero engine components and quality test samples are compared as a precondition for real trials. This enables the evaluation and optimization of film replacement for application of modern digital equipment for economical NDT and defined POD.

Recent Advances in Model-Assisted Probability of Detection

NASA Technical Reports Server (NTRS)

Thompson, R. Bruce; Brasche, Lisa J.; Lindgren, Eric; Swindell, Paul; Winfree, William P.

2009-01-01

The increased role played by probability of detection (POD) in structural integrity programs, combined with the significant time and cost associated with the purely empirical determination of POD, provides motivation for alternate means to estimate this important metric of NDE techniques. One approach to make the process of POD estimation more efficient is to complement limited empirical experiments with information from physics-based models of the inspection process or controlled laboratory experiments. The Model-Assisted Probability of Detection (MAPOD) Working Group was formed by the Air Force Research Laboratory, the FAA Technical Center, and NASA to explore these possibilities. Since the 2004 inception of the MAPOD Working Group, 11 meetings have been held in conjunction with major NDE conferences. This paper will review the accomplishments of this group, which includes over 90 members from around the world. Included will be a discussion of strategies developed to combine physics-based and empirical understanding, draft protocols that have been developed to guide application of the strategies, and demonstrations that have been or are being carried out in a number of countries. The talk will conclude with a discussion of future directions, which will include documentation of benefits via case studies, development of formal protocols for engineering practice, as well as a number of specific technical issues.

Parameterizing Coefficients of a POD-Based Dynamical System

NASA Technical Reports Server (NTRS)

Kalb, Virginia L.

2010-01-01

A method of parameterizing the coefficients of a dynamical system based of a proper orthogonal decomposition (POD) representing the flow dynamics of a viscous fluid has been introduced. (A brief description of POD is presented in the immediately preceding article.) The present parameterization method is intended to enable construction of the dynamical system to accurately represent the temporal evolution of the flow dynamics over a range of Reynolds numbers. The need for this or a similar method arises as follows: A procedure that includes direct numerical simulation followed by POD, followed by Galerkin projection to a dynamical system has been proven to enable representation of flow dynamics by a low-dimensional model at the Reynolds number of the simulation. However, a more difficult task is to obtain models that are valid over a range of Reynolds numbers. Extrapolation of low-dimensional models by use of straightforward Reynolds-number-based parameter continuation has proven to be inadequate for successful prediction of flows. A key part of the problem of constructing a dynamical system to accurately represent the temporal evolution of the flow dynamics over a range of Reynolds numbers is the problem of understanding and providing for the variation of the coefficients of the dynamical system with the Reynolds number. Prior methods do not enable capture of temporal dynamics over ranges of Reynolds numbers in low-dimensional models, and are not even satisfactory when large numbers of modes are used. The basic idea of the present method is to solve the problem through a suitable parameterization of the coefficients of the dynamical system. The parameterization computations involve utilization of the transfer of kinetic energy between modes as a function of Reynolds number. The thus-parameterized dynamical system accurately predicts the flow dynamics and is applicable to a range of flow problems in the dynamical regime around the Hopf bifurcation. Parameter-continuation software can be used on the parameterized dynamical system to derive a bifurcation diagram that accurately predicts the temporal flow behavior.

A Predeployment Limited Technical Assessment of the iPod Touch to Aid the United States Marine Corps

DTIC Science & Technology

2009-08-01

public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES "Safari," " iTunes ," "iPod," "iPod touch," and "iPhone" are registered trademarks...Marine Corps unit and assessed during the EUE.1 1 “Safari,” “ iTunes ,” “iPod,” “iPod touch,” and “iPhone...application store, YouTube, the Apple Safari Web browser, maps, weather, and Apple iTunes . Participants then arranged a paper prototype home screen

Experimental Design for Estimating Unknown Hydraulic Conductivity in a Confined Aquifer using a Genetic Algorithm and a Reduced Order Model

NASA Astrophysics Data System (ADS)

Ushijima, T.; Yeh, W.

2013-12-01

An optimal experimental design algorithm is developed to select locations for a network of observation wells that provides the maximum information about unknown hydraulic conductivity in a confined, anisotropic aquifer. The design employs a maximal information criterion that chooses, among competing designs, the design that maximizes the sum of squared sensitivities while conforming to specified design constraints. Because that the formulated problem is non-convex and contains integer variables (necessitating a combinatorial search), for a realistically-scaled model, the problem may be difficult, if not impossible, to solve through traditional mathematical programming techniques. Genetic Algorithms (GAs) are designed to search out the global optimum; however because a GA requires a large number of calls to a groundwater model, the formulated optimization problem may still be infeasible to solve. To overcome this, Proper Orthogonal Decomposition (POD) is applied to the groundwater model to reduce its dimension. The information matrix in the full model space can then be searched without solving the full model.

Low-order modelling of shallow water equations for sensitivity analysis using proper orthogonal decomposition

NASA Astrophysics Data System (ADS)

Zokagoa, Jean-Marie; Soulaïmani, Azzeddine

2012-06-01

This article presents a reduced-order model (ROM) of the shallow water equations (SWEs) for use in sensitivity analyses and Monte-Carlo type applications. Since, in the real world, some of the physical parameters and initial conditions embedded in free-surface flow problems are difficult to calibrate accurately in practice, the results from numerical hydraulic models are almost always corrupted with uncertainties. The main objective of this work is to derive a ROM that ensures appreciable accuracy and a considerable acceleration in the calculations so that it can be used as a surrogate model for stochastic and sensitivity analyses in real free-surface flow problems. The ROM is derived using the proper orthogonal decomposition (POD) method coupled with Galerkin projections of the SWEs, which are discretised through a finite-volume method. The main difficulty of deriving an efficient ROM is the treatment of the nonlinearities involved in SWEs. Suitable approximations that provide rapid online computations of the nonlinear terms are proposed. The proposed ROM is applied to the simulation of hypothetical flood flows in the Bordeaux breakwater, a portion of the 'Rivière des Prairies' located near Laval (a suburb of Montreal, Quebec). A series of sensitivity analyses are performed by varying the Manning roughness coefficient and the inflow discharge. The results are satisfactorily compared to those obtained by the full-order finite volume model.

Evaluation of the health-related quality of life for patients following laparoscopic cholecystectomy.

PubMed

Tani, Masaji; Kawai, Manabu; Okada, Ken-Ichi; Hirono, Seiko; Hotta, Tsukasa; Takifuji, Katsunari; Yamaue, Hiroki

2015-05-01

Laparoscopic cholecystectomy (LC) has become the standard procedure, and contributes to a shorter hospital stay. However, there have been no reports regarding when the patients can be discharged in terms of their health-related quality of life (HRQOL). The HRQOL was evaluated by using the SF-8 health survey (SF-8) 24-hour version in 127 consecutive patients treated from May 2007 to December 2008. The HRQOL and a visual analogue scale (VAS) score were assessed on the day before surgery and on postoperative day (POD) 1, POD2 and POD7. All scores of the eight domains on POD1 were significantly decreased compared to the preoperative score (P < 0.05), and seven scores were still decreased on POD2, with the mental health (MH) domain showing an improvement. On POD7, the general health score improved to the preoperative level. The physical component summary 8 (PCS-8) was suppressed for all 7 days after LC. The mental health component summary 8 (MCS-8) was improved to the preoperative level on POD2, despite the significant suppression observed on POD1 (P < 0.05). The VAS score was higher in the low PCS-8 (PCS-8 < 42.4) and low MCS-8 (MCS-8 < 40.6) patients than in the high PCS-8 and high MCS-8 patients. The HRQOL score demonstrated the improvement of the MCS-8 on POD2, which might suggest that a discharge of LC patients is appropriate on POD2 in terms of the patients' point of view.

Broad bean and pea by-products as sources of fibre-rich ingredients: potential antioxidant activity measured in vitro.

PubMed

Mateos-Aparicio, Inmaculada; Redondo-Cuenca, Araceli; Villanueva-Suárez, María-José

2012-02-01

By-products generated during the processing of plant food can be considered a promising source of dietary fibre as a functional compound. The dietary fibre composition, soluble sugars and antioxidant activity of the extractable polyphenols of pea and broad bean by-products have been analysed in this study. Total dietary fibre using AOAC methods plus hydrolysis (broad bean pod: 337.3 g kg⁻¹; pea pod: 472.6 g kg⁻¹) is higher (P < 0.05) in both by-products than with the Englyst method (broad bean pod: 309.7 g kg⁻¹; pea pod: 434.6 g kg⁻¹). The main monomers are uronic acids, glucose, arabinose and galactose in broad bean pods. However, pea pods are very rich in glucose and xylose. The soluble sugars analysed by high-performance liquid chromatography in both by-products have glucose as the most important component, followed by sucrose and fructose. The ferric reducing antioxidant power (broad bean pod: 406.4 µmol Trolox equivalents g⁻¹; pea pod: 25.9 µmol Trolox equivalents g⁻¹) and scavenging effect on 2,2-diphenyl-1-picrylhydrazyl radical (EC₅₀ of broad bean pod: 0.4 mg mL⁻¹; EC₅₀ of pea pod: 16.0 mg mL⁻¹) were also measured. Broad bean and pea by-products are very rich in dietary fibre, particularly insoluble dietary fibre and their extractable polyphenols demonstrate antioxidant activity. Therefore they might be regarded as functional ingredients. Copyright © 2011 Society of Chemical Industry.

Mutant Transcriptome Sequencing Provides Insights into Pod Development in Peanut (Arachis hypogaea L.)

PubMed Central

Wan, Liyun; Li, Bei; Lei, Yong; Yan, Liying; Ren, Xiaoping; Chen, Yuning; Dai, Xiaofeng; Jiang, Huifang; Zhang, Juncheng; Guo, Wei; Chen, Ao; Liao, Boshou

2017-01-01

Pod size is the major yield component and a key target trait that is selected for in peanut breeding. However, although numerous quantitative trait loci (QTLs) for peanut pod size have been described, the molecular mechanisms underlying the development of this characteristic remain elusive. A peanut mutant with a narrower pod was developed in this study using ethyl methanesulfonate (EMS) mutagenesis and designated as the “pod width” mutant line (pw). The fresh pod weight of pw was only about 40% of that seen in the wild-type (WT) Zhonghua16, while the hull and seed filling of the mutant both also developed at earlier stages. Pods from both pw and WT lines were sampled 20, 40, and 60 days after flowering (DAF) and used for RNA-Seq analysis; the results revealed highly differentially expressed lignin metabolic pathway genes at all three stages, but especially at DAF 20 and DAF 40. At the same time, expression of genes related to auxin signal transduction was found to be significantly repressed during the pw early pod developmental stage. A genome-wide comparative analysis of expression profiles revealed 260 differentially expressed genes (DEGs) across all three stages, and two candidate genes, c26901_g1 (CAD) and c37339_g1 (ACS), responsible for pod width were identified by integrating expression patterns and function annotation of the common DEGs within the three stages. Taken together, the information provided in this study illuminates the processes underlying peanut pod development, and will facilitate further identification of causal genes and the development of improved peanut varieties with higher yields. PMID:29170673

Seed abortion in wind-dispersed pods of Dalbergia sissoo: maternal regulation or sibling rivalry?

PubMed

Ganeshaiah, K N; Shaanker, R Uma

1988-10-01

Dalbergia sissoo, a wind-dispersed tropical tree, shows a positively skewed distribution of seeds per pod. This is attributed to the enhanced dispersal advantage of few-seeded pods due to their reduced wing loading (ratio of weight to pod surface area) and low settling velocity. The proximate mechanisms causing the positively skewed distribution were investigated. The distribution could not be attributed to the distribution pattern of ovule number per ovary, pollen grain limitation, lack of ovule fertilization, or post-fertilization elimination of many-seeded pods. Rather, it was caused by the post-fertilization abortion of seeds within a pod 2 weeks after fertilization. This intra-pod seed abortion (IPSA) is due to a dominance hierarchy of fertilized ovules from the distal (near stigma) to the basal end, generated by the temporal differences in fertilization. The dominant developing seeds at the distal end cause the abortion of others through the production and diffusion of an aborting agent. When the dominance hierarchy of the siblings is not intense, pods are formed with more than one seed. We argue that the positively skewed distribution of seeds per pod is not due to maternal regulation but is a result of sibling rivalry. We propose that this sibling rivalry is generated by genetic differences in pollen grain fitness and disucss the results in the context of parent-offspring conflict.

Preliminary Orbit Determination System (PODS) for Tracking and Data Relay Satellite System (TDRSS)-tracked target Spacecraft using the homotopy continuation method

NASA Technical Reports Server (NTRS)

Kirschner, S. M.; Samii, M. V.; Broaddus, S. R.; Doll, C. E.

1988-01-01

The Preliminary Orbit Determination System (PODS) provides early orbit determination capability in the Trajectory Computation and Orbital Products System (TCOPS) for a Tracking and Data Relay Satellite System (TDRSS)-tracked spacecraft. PODS computes a set of orbit states from an a priori estimate and six tracking measurements, consisting of any combination of TDRSS range and Doppler tracking measurements. PODS uses the homotopy continuation method to solve a set of nonlinear equations, and it is particularly effective for the case when the a priori estimate is not well known. Since range and Doppler measurements produce multiple states in PODS, a screening technique selects the desired state. PODS is executed in the TCOPS environment and can directly access all operational data sets. At the completion of the preliminary orbit determination, the PODS-generated state, along with additional tracking measurements, can be directly input to the differential correction (DC) process to generate an improved state. To validate the computational and operational capabilities of PODS, tests were performed using simulated TDRSS tracking measurements for the Cosmic Background Explorer (COBE) satellite and using real TDRSS measurements for the Earth Radiation Budget Satellite (ERBS) and the Solar Mesosphere Explorer (SME) spacecraft. The effects of various measurement combinations, varying arc lengths, and levels of degradation of the a priori state vector on the PODS solutions were considered.

QTL mapping for resistance to frosty pod and black pod diseases in an f1 population of Theobroma cacao L

USDA-ARS?s Scientific Manuscript database

Cacao (Theobroma cacao L.) is a native crop of the Americas; however severe losses due to frosty pod (FP) [Moniliophthora roreri (Cif. and Par.)], and black pod (BP) [Phytophthora palmivora (Butl.) Butl.] have reduced cacao in the Americas to only 13.0% of world production. Agronomic practices to co...

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbital maneuvering system (OMS) pod is moved into place on Atlantis. It is one of two OMS pods attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbital maneuvering system (OMS) pod is moved into place on Atlantis. It is one of two OMS pods attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbital maneuvering system (OMS) pod is suspended in air as it is moved toward Atlantis for installation. Two OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbital maneuvering system (OMS) pod is suspended in air as it is moved toward Atlantis for installation. Two OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbital maneuvering system (OMS) pod is moved closer to Atlantis for installation. Two OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, an orbital maneuvering system (OMS) pod is moved closer to Atlantis for installation. Two OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, technicians make adjustments to the orbital maneuvering system (OMS) pod being installed on Atlantis. The OMS pod is one of two that are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, technicians make adjustments to the orbital maneuvering system (OMS) pod being installed on Atlantis. The OMS pod is one of two that are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods is being moved for installation on Atlantis. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods is being moved for installation on Atlantis. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, technicians move an orbital maneuvering system (OMS) pod into the correct position on Atlantis. The OMS pod is one of two that are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, technicians move an orbital maneuvering system (OMS) pod into the correct position on Atlantis. The OMS pod is one of two that are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

Contribution of pod borer pests to soybean crop production (case in Pondidaha, Konawe District, Southeast Sulawesi)

NASA Astrophysics Data System (ADS)

Rahayu, M.; Bande, LOS; Hasan, A.; Yuswana, A.; Rinambo, F.

2018-02-01

Soybean (Glycine max L.) is one of the most important crops which production continues to be improved in all areas of soybean cultivation centers in an effort to maintain the availability of soybean foods, including Southeast Sulawesi. The purpose of this study was to analyze the contribution of pod borer pests to soybean crop production. Methods of direct observation were made on observed variables, including species and population of pest pod borer, intensity, and crop production. The result that found four types of pod borer pests are Nezara viridula, Riptortus linearis, Etiella zinckenella, and Leptocorisa acuta, each with a different population and contribution to the intensity of pod damage. The result of path analysis showed that directly population of N. viridula (61.14) and E. zinckenella (66.44) gave positive contribution in increasing pod damage, by 0.332 and 0.502 respectively, while the negative contribution was shown by population of R. linearis and L. acuta. Damage of the pod causes increased production of low soybean is only about 0.202, therefore required appropriate control techniques to control pod borer pests populations in soybean crops.

In vitro antioxidant and antimalarial activities of leaves, pods and bark extracts of Acacia nilotica (L.) Del.

PubMed

Sadiq, Muhammad Bilal; Tharaphan, Pattamon; Chotivanich, Kesinee; Tarning, Joel; Anal, Anil Kumar

2017-07-18

The emergence of drug resistant malaria is threatening our ability to treat and control malaria in the Southeast Asian region. There is an urgent need to develop novel and chemically diverse antimalarial drugs. This study aimed at evaluating the antimalarial and antioxidant potentials of Acacia nilotica plant extracts. The antioxidant activities of leaves, pods and bark extracts were determined by standard antioxidant assays; reducing power capacity, % lipid peroxidation inhibition and ferric reducing antioxidant power assay. The antimalarial activities of plant extracts against Plasmodium falciparum parasites were determined by the 48 h schizont maturation inhibition assay. Further confirmation of schizonticide activity of extracts was made by extending the incubation period up to 96 h after removing the plant extract residues from parasites culture. Inhibition assays were analyzed by dose-response modelling. In all antioxidant assays, leaves of A. nilotica showed higher antioxidant activity than pods and bark. Antimalarial IC 50 values of leaves, pods and bark extracts were 1.29, 4.16 and 4.28 μg/ml respectively, in the 48 h maturation assay. The IC 50 values determined for leaves, pods and bark extracts were 3.72, 5.41 and 5.32 μg/ml respectively, after 96 h of incubation. All extracts inhibited the development of mature schizont, indicating schizonticide activity against P. falciparum. A. nilotica extracts showed promising antimalarial and antioxidant effects. However, further investigation is needed to isolate and identify the active components responsible for the antimalarial and antioxidant effects.

A Signal-to-Noise Crossover Dose as the Point of Departure for Health Risk Assessment

PubMed Central

Portier, Christopher J.; Krewski, Daniel

2011-01-01

Background: The U.S. National Toxicology Program (NTP) cancer bioassay database provides an opportunity to compare both existing and new approaches to determining points of departure (PoDs) for establishing reference doses (RfDs). Objectives: The aims of this study were a) to investigate the risk associated with the traditional PoD used in human health risk assessment [the no observed adverse effect level (NOAEL)]; b) to present a new approach based on the signal-to-noise crossover dose (SNCD); and c) to compare the SNCD and SNCD-based RfD with PoDs and RfDs based on the NOAEL and benchmark dose (BMD) approaches. Methods: The complete NTP database was used as the basis for these analyses, which were performed using the Hill model. We determined NOAELs and estimated corresponding extra risks. Lower 95% confidence bounds on the BMD (BMDLs) corresponding to extra risks of 1%, 5%, and 10% (BMDL01, BMDL05, and BMDL10, respectively) were also estimated. We introduce the SNCD as a new PoD, defined as the dose where the additional risk is equal to the “background noise” (the difference between the upper and lower bounds of the two-sided 90% confidence interval on absolute risk) or a specified fraction thereof. Results: The median risk at the NOAEL was approximately 10%, and the default uncertainty factor (UF = 100) was considered most applicable to the BMDL10. Therefore, we chose a target risk of 1/1,000 (0.1/100) to derive an SNCD-based RfD by linear extrapolation. At the median, this approach provided the same RfD as the BMDL10 divided by the default UF. Conclusions: Under a standard BMD approach, the BMDL10 is considered to be the most appropriate PoD. The SNCD approach, which is based on the lowest dose at which the signal can be reliably detected, warrants further development as a PoD for human health risk assessment. PMID:21813365

Hydrologic Process Regularization for Improved Geoelectrical Monitoring of a Lab-Scale Saline Tracer Experiment

NASA Astrophysics Data System (ADS)

Oware, E. K.; Moysey, S. M.

2016-12-01

Regularization stabilizes the geophysical imaging problem resulting from sparse and noisy measurements that render solutions unstable and non-unique. Conventional regularization constraints are, however, independent of the physics of the underlying process and often produce smoothed-out tomograms with mass underestimation. Cascaded time-lapse (CTL) is a widely used reconstruction technique for monitoring wherein a tomogram obtained from the background dataset is employed as starting model for the inversion of subsequent time-lapse datasets. In contrast, a proper orthogonal decomposition (POD)-constrained inversion framework enforces physics-based regularization based upon prior understanding of the expected evolution of state variables. The physics-based constraints are represented in the form of POD basis vectors. The basis vectors are constructed from numerically generated training images (TIs) that mimic the desired process. The target can be reconstructed from a small number of selected basis vectors, hence, there is a reduction in the number of inversion parameters compared to the full dimensional space. The inversion involves finding the optimal combination of the selected basis vectors conditioned on the geophysical measurements. We apply the algorithm to 2-D lab-scale saline transport experiments with electrical resistivity (ER) monitoring. We consider two transport scenarios with one and two mass injection points evolving into unimodal and bimodal plume morphologies, respectively. The unimodal plume is consistent with the assumptions underlying the generation of the TIs, whereas bimodality in plume morphology was not conceptualized. We compare difference tomograms retrieved from POD with those obtained from CTL. Qualitative comparisons of the difference tomograms with images of their corresponding dye plumes suggest that POD recovered more compact plumes in contrast to those of CTL. While mass recovery generally deteriorated with increasing number of time-steps, POD outperformed CTL in terms of mass recovery accuracy rates. POD is computationally superior requiring only 2.5 mins to complete each inversion compared to 3 hours for CTL to do the same.

Ship electric propulsion simulator based on networking technology

NASA Astrophysics Data System (ADS)

Zheng, Huayao; Huang, Xuewu; Chen, Jutao; Lu, Binquan

2006-11-01

According the new ship building tense, a novel electric propulsion simulator (EPS) had been developed in Marine Simulation Center of SMU. The architecture, software function and FCS network technology of EPS and integrated power system (IPS) were described. In allusion to the POD propeller in ship, a special physical model was built. The POD power was supplied from the simulative 6.6 kV Medium Voltage Main Switchboard, its control could be realized in local or remote mode. Through LAN, the simulated feature information of EPS will pass to the physical POD model, which would reflect the real thruster working status in different sea conditions. The software includes vessel-propeller math module, thruster control system, distribution and emergency integrated management, double closed loop control system, vessel static water resistance and dynamic software; instructor main control software. The monitor and control system is realized by real time data collection system and CAN bus technology. During the construction, most devices such as monitor panels and intelligent meters, are developed in lab which were based on embedded microcomputer system with CAN interface to link the network. They had also successfully used in practice and would be suitable for the future demands of digitalization ship.

Space Shuttle AFRSI OMS pod environment test using model 81-0 test fixture in the Ames Research Center 9x7-foot supersonic wind tunnel (OS-314A/B/C)

NASA Technical Reports Server (NTRS)

Collette, J. G. R.

1984-01-01

A test was conducted in the NASA/Ames Research Center 9x7-foot Supersonic Wind Tunnel to help resolve an anomaly that developed during the STS-6 orbiter flight wherein sections of the Advanced Flexible Reusable Surface Insulation (AFRSI) covering the OMS pods suffered some damage. A one-third scale two-dimensional shell structure model of an OMS pod cross-section was employed to support the test articles. These consisted of 15 AFRSI blanket panels form-fitted over the shell structures for exposure to simulated flight conditions. Of six baseline blankets, two were treated with special surface coatings. Two other panels were configured with AFRSI sections removed from the OV099 orbiter vehicle after the STS-6 flight. Seven additional specimens incorporated alternative designs and repairs. Following a series of surface pressure calibration runs, the specimens were exposed to simulated ascent and entry dynamic pressure profiles. Entry conditions included the use of a vortex generator to evaluate the effect of shed vortices on the AFRSI located in the area of concern.

Assessment of Re-sighting Rates of Previously Dart-Tagged False Killer Whales and Short-Finned Pilot Whales in Hawai’i: A Preliminary Report Taking into Account Re-sighting of Social Groups

DTIC Science & Technology

2011-10-14

For example, with southern resident killer whales , re-sighting a specific pod (or sub-pod) member is likely only if that pod (or sub-pod) has been...remaining four clusters are seen infrequently, a situation similar to pod-specific differences in sighting rates for northern resident killer whales (Ford...Satellite tracking reveals distinct movement patterns for Type B and Type C killer whales in the southern Ross Sea, Antarctica. Polar Biology 31:1461

Lamb wave-based damage quantification and probability of detection modeling for fatigue life assessment of riveted lap joint

NASA Astrophysics Data System (ADS)

He, Jingjing; Wang, Dengjiang; Zhang, Weifang

2015-03-01

This study presents an experimental and modeling study for damage detection and quantification in riveted lap joints. Embedded lead zirconate titanate piezoelectric (PZT) ceramic wafer-type sensors are employed to perform in-situ non-destructive testing during fatigue cyclical loading. A multi-feature integration method is developed to quantify the crack size using signal features of correlation coefficient, amplitude change, and phase change. In addition, probability of detection (POD) model is constructed to quantify the reliability of the developed sizing method. Using the developed crack size quantification method and the resulting POD curve, probabilistic fatigue life prediction can be performed to provide comprehensive information for decision-making. The effectiveness of the overall methodology is demonstrated and validated using several aircraft lap joint specimens from different manufactures and under different loading conditions.

Parts on Demand: Evaluation of Approaches to Achieve Flexible Manufacturing Systems for Navy Parts on Demand. Volume 2. Appendices

DTIC Science & Technology

1984-02-01

of Cost Analysis Worksheets * POD Program-Economic Analysis & Methodology - Economic Evaluation Procedures for POD Investment Program - System...Approval Considerations - POD Investment Program - Potential Improvement Areas for POD - Example Cost Categories and Determinants Appendix E Long Range R&D...Funding Profiles * Investment Strategy for Integrated Circuits Diminishing Sources of Supply - Problem Scope - Approach - Alternatives - Proposed

Observer POD for radiographic testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kanzler, Daniel, E-mail: daniel.kanzler@bam.de, E-mail: uwe.ewert@bam.de, E-mail: christina.mueller@bam.de; Ewert, Uwe, E-mail: daniel.kanzler@bam.de, E-mail: uwe.ewert@bam.de, E-mail: christina.mueller@bam.de; Müller, Christina, E-mail: daniel.kanzler@bam.de, E-mail: uwe.ewert@bam.de, E-mail: christina.mueller@bam.de

2015-03-31

The radiographic testing (RT) is a non-destructive testing (NDT) method capable of finding volumetric and open planar defects depending on their orientation. The radiographic contrast is higher for larger penetrated length of the defect in a component. Even though, the detectability of defects does not only depend on the contrast, but also on the noise, the defect area and the geometry of the defect. The currently applied Probability of Detection (POD) approach uses a detection threshold that is only based on a constant noise level or on a constant contrast threshold. This does not reflect accurately the results of evaluationsmore » by human observers. A new approach is introduced, using the widely applied POD evaluation and additionally a detection threshold depending on the lateral area and shape of the indication. This work shows the process of calculating the POD curves with simulated data by the modeling software aRTist and with artificial reference data of different defect types, such as ASTM E 476 EPS plates, flat bottom holes and notches. Additional experiments with different operators confirm that the depth of a defect, the lateral area and shape of its indication contribute with different weight to the detectability of the defect if evaluated by human operators on monitors.« less

Evaluation and optimization of ethanol production from carob pod extract by Zymomonas mobilis using response surface methodology.

PubMed

Vaheed, Hossein; Shojaosadati, Seyed Abbas; Galip, Hasan

2011-01-01

In this research, ethanol production from carob pod extract (extract) using Zymomonas mobilis with medium optimized by Plackett-Burman (P-B) and response surface methodologies (RSM) was studied. Z. mobilis was recognized as useful for ethanol production from carob pod extract. The effects of initial concentrations of sugar, peptone, and yeast extract as well as agitation rate (rpm), pH, and culture time in nonhydrolyzed carob pod extract were investigated. Significantly affecting variables (P = 0.05) in the model obtained from RSM studies were: weights of bacterial inoculum, initial sugar, peptone, and yeast extract. Acid hydrolysis was useful to complete conversion of sugars to glucose and fructose. Nonhydrolyzed extract showed higher ethanol yield and residual sugar compared with hydrolyzed extract. Ethanol produced (g g(-1) initial sugar, as the response) was not significantly different (P = 0.05) when Z. mobilis performance was compared in hydrolyzed and nonhydrolyzed extract. The maximum ethanol of 0.34 ± 0.02 g g(-1) initial sugar was obtained at 30°C, initial pH 5.2, and 80 rpm, using concentrations (g per 50 mL culture media) of: inoculum bacterial dry weight, 0.017; initial sugar, 5.78; peptone, 0.43; yeast extract, 0.43; and culture time of 36 h.

Practical examples of modeling choices and their consequences for risk assessment

EPA Science Inventory

Although benchmark dose (BMD) modeling has become the preferred approach to identifying a point of departure (POD) over the No Observed Adverse Effect Level, there remain challenges to its application in human health risk assessment. BMD modeling, as currently implemented by the...

Deconvolution of reacting-flow dynamics using proper orthogonal and dynamic mode decompositions

NASA Astrophysics Data System (ADS)

Roy, Sukesh; Hua, Jia-Chen; Barnhill, Will; Gunaratne, Gemunu H.; Gord, James R.

2015-01-01

Analytical and computational studies of reacting flows are extremely challenging due in part to nonlinearities of the underlying system of equations and long-range coupling mediated by heat and pressure fluctuations. However, many dynamical features of the flow can be inferred through low-order models if the flow constituents (e.g., eddies or vortices) and their symmetries, as well as the interactions among constituents, are established. Modal decompositions of high-frequency, high-resolution imaging, such as measurements of species-concentration fields through planar laser-induced florescence and of velocity fields through particle-image velocimetry, are the first step in the process. A methodology is introduced for deducing the flow constituents and their dynamics following modal decomposition. Proper orthogonal (POD) and dynamic mode (DMD) decompositions of two classes of problems are performed and their strengths compared. The first problem involves a cellular state generated in a flat circular flame front through symmetry breaking. The state contains two rings of cells that rotate clockwise at different rates. Both POD and DMD can be used to deconvolve the state into the two rings. In POD the contribution of each mode to the flow is quantified using the energy. Each DMD mode can be associated with an energy as well as a unique complex growth rate. Dynamic modes with the same spatial symmetry but different growth rates are found to be combined into a single POD mode. Thus, a flow can be approximated by a smaller number of POD modes. On the other hand, DMD provides a more detailed resolution of the dynamics. Two classes of reacting flows behind symmetric bluff bodies are also analyzed. In the first, symmetric pairs of vortices are released periodically from the two ends of the bluff body. The second flow contains von Karman vortices also, with a vortex being shed from one end of the bluff body followed by a second shedding from the opposite end. The way in which DMD can be used to deconvolve the second flow into symmetric and von Karman vortices is demonstrated. The analyses performed illustrate two distinct advantages of DMD: (1) Unlike proper orthogonal modes, each dynamic mode is associated with a unique complex growth rate. By comparing DMD spectra from multiple nominally identical experiments, it is possible to identify "reproducible" modes in a flow. We also find that although most high-energy modes are reproducible, some are not common between experimental realizations; in the examples considered, energy fails to differentiate between reproducible and nonreproducible modes. Consequently, it may not be possible to differentiate reproducible and nonreproducible modes in POD. (2) Time-dependent coefficients of dynamic modes are complex. Even in noisy experimental data, the dynamics of the phase of these coefficients (but not their magnitude) are highly regular. The phase represents the angular position of a rotating ring of cells and quantifies the downstream displacement of vortices in reacting flows. Thus, it is suggested that the dynamical characterizations of complex flows are best made through the phase dynamics of reproducible DMD modes.

The importance of nodule CO2 fixation for the efficiency of symbiotic nitrogen fixation in pea at vegetative growth and during pod formation.

PubMed

Fischinger, Stephanie Anastasia; Schulze, Joachim

2010-05-01

Nodule CO2 fixation is of pivotal importance for N2 fixation. The process provides malate for bacteroids and oxaloacetate for nitrogen assimilation. The hypothesis of the present paper was that grain legume nodules would adapt to higher plant N demand and more restricted carbon availability at pod formation through increased nodule CO2 fixation and a more efficient N2 fixation. Growth, N2 fixation, and nodule composition during vegetative growth and at pod formation were studied in pea plants (Pisum sativum L.). In parallel experiments, 15N2 and 13CO2 uptake, as well as nodule hydrogen and CO2 release, was measured. Plants at pod formation showed higher growth rates and N2 fixation per plant when compared with vegetative growth. The specific activity of active nodules was about 25% higher at pod formation. The higher nodule activity was accompanied by higher amino acid concentration in nodules and xylem sap with a higher share of asparagine. Nodule 13CO2 fixation was increased at pod formation, both per plant and per 15N2 fixed unit. However, malate concentration in nodules was only 40% of that during vegetative growth and succinate was no longer detectable. The data indicate that increased N2 fixation at pod formation is connected with strongly increased nodule CO2 fixation. While the sugar concentration in nodules at pod formation was not altered, the concentration of organic acids, namely malate and succinate, was significantly lower. It is concluded that strategies to improve the capability of nodules to fix CO2 and form organic acids might prolong intensive N2 fixation into the later stages of pod formation and pod filling in grain legumes.

Characterization of renin-angiotensin system enzyme activities in cultured mouse podocytes.

PubMed

Velez, Juan Carlos Q; Bland, Alison M; Arthur, John M; Raymond, John R; Janech, Michael G

2007-07-01

Intraglomerular ANG II has been linked to glomerular injury. However, little is known about the contribution of podocytes (POD) to intraglomerular ANG II homeostasis. The aim of the present study was to examine the processing of angiotensin substrates by cultured POD. Our approach was to use matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry for peptide determination from conditioned cell media and customized AQUA peptides for quantification. Immortalized mouse POD were incubated with 1-2 microM ANG I, ANG II, or the renin substrate ANG-(1-14) for different time intervals and coincubated in parallel with various inhibitors. Human mesangial cells (MES) were used as controls. POD incubated with 1 microM ANG I primarily formed ANG-(1-9) and ANG-(1-7). In contrast, MES incubated with ANG I primarily generated ANG II. In POD, ANG-(1-7) was the predominant product, and its formation was inhibited by a neprilysin inhibitor. Modest angiotensin-converting enzyme (ACE) activity was also detected in POD, although only after cells were incubated with 2 microM ANG I. In addition, we observed that POD degraded ANG II into ANG III and ANG-(1-7). An aminopeptidase A inhibitor inhibited ANG III formation, and an ACE2 inhibitor led to ANG II accumulation. Furthermore, we found that POD converted ANG-(1-14) to ANG I and ANG-(1-7). This conversion was inhibited by a renin inhibitor. These findings demonstrate that POD express a functional intrinsic renin-angiotensin system characterized by neprilysin, aminopeptidase A, ACE2, and renin activities, which predominantly lead to ANG-(1-7) and ANG-(1-9) formation, as well as ANG II degradation. These findings may reflect a specific role of POD in maintenance of intraglomerular renin-angiotensin system balance.

Impact of food and fluid intake on technical and biological measurement error in body composition assessment methods in athletes.

PubMed

Kerr, Ava; Slater, Gary J; Byrne, Nuala

2017-02-01

Two, three and four compartment (2C, 3C and 4C) models of body composition are popular methods to measure fat mass (FM) and fat-free mass (FFM) in athletes. However, the impact of food and fluid intake on measurement error has not been established. The purpose of this study was to evaluate standardised (overnight fasted, rested and hydrated) v. non-standardised (afternoon and non-fasted) presentation on technical and biological error on surface anthropometry (SA), 2C, 3C and 4C models. In thirty-two athletic males, measures of SA, dual-energy X-ray absorptiometry (DXA), bioelectrical impedance spectroscopy (BIS) and air displacement plethysmography (BOD POD) were taken to establish 2C, 3C and 4C models. Tests were conducted after an overnight fast (duplicate), about 7 h later after ad libitum food and fluid intake, and repeated 24 h later before and after ingestion of a specified meal. Magnitudes of changes in the mean and typical errors of measurement were determined. Mean change scores for non-standardised presentation and post meal tests for FM were substantially large in BIS, SA, 3C and 4C models. For FFM, mean change scores for non-standardised conditions produced large changes for BIS, 3C and 4C models, small for DXA, trivial for BOD POD and SA. Models that included a total body water (TBW) value from BIS (3C and 4C) were more sensitive to TBW changes in non-standardised conditions than 2C models. Biological error is minimised in all models with standardised presentation but DXA and BOD POD are acceptable if acute food and fluid intake remains below 500 g.

A method for creating interactive content for the iPod, and its potential use as a learning tool: Technical Advances

PubMed Central

Palmer, Edward J; Devitt, Peter G

2007-01-01

Background Podcasting is currently a popular means of delivery of information with a large number of podcasts specifically tailored for educational purposes. It can be argued that the passive nature of this teaching methodology limits the educational benefit that can be derived from podcasts. This paper describes the development and construction of interactive material for the iPod, and a survey of student attitudes towards this type of learning material. Methods The development of interactive material for an iPod is described in detail. This material was developed and demonstrated to 50 medical students. These students completed a paper-based survey on the potential uses of this technology, before and after a 20 minute presentation in class of an interactive case-study on an iPod. Results A technical description of how to develop interactive content for the iPod was created. The results of the student survey indicate a favourable shift in student attitudes after viewing the interactive case. Despite only 15% of the students owning an iPod, 57% of the students were positive about having access to interactive iPod content and 59% believed they would use it whilst travelling. The percentage of students who felt podcasting was a useful means of learning increased from 9% to 41%. Conclusion The development of interactive content for the iPod is feasible. There are indications that students view interactive iPod cases as having value as an additional learning resource. PMID:17888168

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, technicians make final adjustments to the orbital maneuvering system (OMS) pod being installed on Atlantis. The OMS pod is one of two that are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, technicians make final adjustments to the orbital maneuvering system (OMS) pod being installed on Atlantis. The OMS pod is one of two that are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods is lifted off its stand to move it toward Atlantis for installation. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

NASA Image and Video Library

2003-10-30

KENNEDY SPACE CENTER, FLA. - In the Orbiter Processing Facility, one of two orbital maneuvering system (OMS) pods is lifted off its stand to move it toward Atlantis for installation. The OMS pods are attached to the upper aft fuselage left and right sides. Fabricated primarily of graphite epoxy composite and aluminum, each pod is 21.8 feet long and 11.37 feet wide at its aft end and 8.41 feet wide at its forward end, with a surface area of approximately 435 square feet. Each pod houses the Reaction Control System propulsion components used for inflight maneuvering and is attached to the aft fuselage with 11 bolts.

Validity and reliability of the BOD POD® S/T tracking system.

PubMed

Tseh, W; Caputo, J L; Keefer, D J

2010-10-01

BOD POD(®) self-testing (S/T) body composition tracking system is a practical assessment tool designed for use in the health and fitness industries. Relative to its parent counterpart, the BOD POD(®) S/T has received little research attention. The primary purpose was to determine the validity of the BOD POD(®) S/T against hydrostatic weighing and 7-site skinfolds. Secondary aim was to determine the within-day and between-day reliability of the BOD POD(®) S/T. After a period of equipment and testing accommodation, volunteer's (N=50) body composition (%BF) via 7-site skinfolds, BOD POD(®) S/T, and hydrostatic weighing were obtained on the second and third visits. BOD POD(®) S/T significantly overestimated %BF when compared to hydrostatic weighing and 7-site skinfolds. There was no statistical difference between 7-site skinfolds and hydrostatic weighing values. BOD POD(®) S/T reliability within-day and between-days were high. While the BOD POD(®) S/T body composition tracking system is deemed reliable both within-day and between-days, it did significantly overestimate %BF in comparison to hydrostatic weighing and skinfolds. Future research should be aimed at deriving a correction factor for this body composition assessment tool. © Georg Thieme Verlag KG Stuttgart · New York.

Polyplanar optical display

NASA Astrophysics Data System (ADS)

Veligdan, James T.; Beiser, Leo; Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard

1997-07-01

The polyplanar optical display (POD) is a unique display screen which can be use with any projection source. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 100 milliwatt green solid state laser as its optical source. In order to produce real- time video, the laser light is being modulated by a digital light processing (DLP) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, we discuss the electronic interfacing to the DLP chip, the opto-mechanical design and viewing angle characteristics.

Laser-driven polyplanar optic display

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veligdan, J.T.; Biscardi, C.; Brewster, C.

1998-01-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte-black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 200 milliwatt green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP) chip manufactured by Texas Instruments, Inc. A variablemore » astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the DLP chip, the optomechanical design and viewing angle characteristics.« less

Laser-driven polyplanar optic display

NASA Astrophysics Data System (ADS)

Veligdan, James T.; Beiser, Leo; Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard

1998-05-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte-black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 200 milliwatt green solid- state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLPTM) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, we discuss the DLPTM chip, the opto-mechanical design and viewing angle characteristics.

InstrumentationPod (IPOD) User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, Robert F.

2014-06-12

This document describes the Instrumentation Pod (IPOD) and its operation and use. The IPOD is a low-power detector system comprising a 3He tube with preamp for neutron detection, a microcontroller-based data acquisition system, a GPS receiver for locationdetermination and time-synchronization, and power filtering and protection. The IPOD is intended to be bolted to the top of Dual-Use Casks stored at Baikal-1 in Kazakhstan in order to maintain continuity of knowledge of the materials stored within the cask. The data acquisition system receives pulses from the neutron-detection preamp, combines this information with other sensor data, and stores the result on twomore » SD cards that are part of the data acquisition system. Firmware in the data acquisition system controls collection and storing of the data and enables configuration of the acquisition parameters.« less

The Vanilla Project.

ERIC Educational Resources Information Center

Armstead, David

1994-01-01

Explains a series of experiments that enable students to discover the internal and external structure of the vanilla pod, isolate the chemical constituents of the pod, identify vanillin in the pod extract, and compare extracts across varieties of vanilla. (DDR)

The Human Cytomegalovirus IE2 and UL112-113 Proteins Accumulate in Viral DNA Replication Compartments That Initiate from the Periphery of Promyelocytic Leukemia Protein-Associated Nuclear Bodies (PODs or ND10)

PubMed Central

Ahn, Jin-Hyun; Jang, Won-Jong; Hayward, Gary S.

1999-01-01

During human cytomegalovirus (HCMV) infection, the periphery of promyelocytic leukemia protein (PML)-associated nuclear bodies (also known as PML oncogenic domains [PODs] or ND10) are sites for both input viral genome deposition and immediate-early (IE) gene transcription. At very early times after infection, the IE1 protein localizes to and subsequently disrupts PODs, whereas the IE2 protein localizes within or adjacent to PODs. This process appears to be required for efficient viral gene expression and DNA replication. We have investigated the initiation of viral DNA replication compartment formation by studying the localization of viral IE proteins, DNA replication proteins, and the PML protein during productive infection. Localization of IE2 adjacent to PODs between 2 and 6 h after infection was confirmed by confocal microscopy of human fibroblasts (HF cells) infected with both wild-type HCMV(Towne) and with an IE1-deletion mutant HCMV(CR208) that fails to disrupt PODs. In HCMV(Towne)-infected HF cells at 24 to 48 h, IE2 also accumulated in newly formed viral DNA replication compartments containing the polymerase processivity factor (UL44), the single-stranded DNA binding protein (SSB; UL57), the UL112-113 accessory protein, and newly incorporated bromodeoxyuridine (BrdU). Double labeling of the HCMV(CR208)-infected HF cells demonstrated that formation of viral DNA replication compartments initiates within granular structures that bud from the periphery of some of the PODs and subsequently coalesce into larger structures that are flanked by PODs. In transient DNA transfection assays, both the N terminus (codons 136 to 290) and the C terminus (codons 379 to 579) of IE2 exon 5, but not the central region between them, were found to be necessary for both the punctate distribution of IE2 and its association with PODs. Like IE2, the UL112-113 accessory replication protein was also distributed in a POD-associated pattern in both DNA-transfected and virus-infected cells beginning at 6 h. Furthermore, when all six replication core machinery proteins (polymerase complex, SSB, and helicase-primase complex) were expressed together in the presence of UL112-113, they also accumulated at POD-associated sites, suggesting that the UL112-113 protein (but not IE2) may play a role in recruitment of viral replication fork proteins into the periphery of PODs. These results show that (i) subsequent to accumulating at the periphery of PODs, IE2 is incorporated together with the core proteins into viral DNA replication compartments that initiate from the periphery of PODs and then grow to fill the space between groups of PODs, and (ii) the UL112-113 protein appears to have a key role in assembling and recruiting the core replication machinery proteins in the initial stages of viral replication compartment formation. PMID:10559364

The iPod Experiments: Michael Stephens Investigates Ways that Librarians Are Using This Popular Consumer Device

ERIC Educational Resources Information Center

Stephens, Michael

2005-01-01

No other consumer electronic device has created such an impact on popular culture in recent years as the Apple iPod. Since iPod's release in November 2001, music fans have been able to carry upwards of 15,000 song files on those sleek devices with their trendy white headphones. Over ten million iPods have been sold--nearly half of them in the last…

Copernicus POD Service: Ready for Sentinel-3

NASA Astrophysics Data System (ADS)

Peter, H.; Fernández, J.; Escobar, D.; Féménias, P.; Flohrer, C.; Otten, M.

2015-12-01

The Copernicus POD Service is part of the Copernicus PDGS Ground Segment of the Sentinel missions. A GMV-led consortium is operating the Copernicus POD Service being in charge of generating precise orbital products and auxiliary data files for their use as part of the processing chains of the respective Sentinel PDGS. The Sentinel-1, -2 & -3 missions have different but very demanding requirements in terms of orbital accuracy and timeliness. Orbital products in Near Real Time (latency: 30 min), Short Time Critical (1.5 days) and Non-time Critical (20-30 days) are required. The accuracy requirements are very challenging, targeting 5 cm in 3D for Sentinel-1 and 2-3 cm in radial direction for Sentinel-3. Sentinel-3A carries, in addition to a GPS receiver a laser retro reflector and a DORIS receiver. On the one hand, the three different techniques GPS, SLR and DORIS make POD more complex but, on the other hand, it is very helpful to have independent techniques available for validation of the orbit results. The successful POD processing for Sentinel-1A is a good preparation for Sentinel-3A due to the similar demanding orbit accuracy requirements. The Copernicus POD Service is ready for Sentinel-3A and the service will process GPS and SLR data routinely and has the capacity to process DORIS in NTC and reprocessing campaigns. The three independent orbit determination techniques on Sentinel-3 offer big potential for scientific exploitation. Carrying all three techniques together makes the satellite, e.g., very useful for combining all the techniques on observation level as it could only be done for Jason-2 until now. The Sentinel POD Quality Working Group strongly supporting the CPOD Service delivers additional orbit solutions to validate the CPOD results independently. The recommendations from this body guarantee that the CPOD Service is updated following state-of-the-art algorithms, models and conventions. The QWG also focuses on the scientific exploitation of the Sentinel missions. The current status of the CPOD Service is presented operating Sentinel-1A and -2A and its readiness for Sentinel-3A. It is shown how the quality and the timeliness of the products are guaranteed. Possibilities for scientific exploitation of the Sentinel-3 mission also in synergy with other Earth Observation and Sentinel missions are presented.

Development of a Reduced-Order Model for Reacting Gas-Solids Flow using Proper Orthogonal Decomposition

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDaniel, Dwayne; Dulikravich, George; Cizmas, Paul

2017-11-27

This report summarizes the objectives, tasks and accomplishments made during the three year duration of this research project. The report presents the results obtained by applying advanced computational techniques to develop reduced-order models (ROMs) in the case of reacting multiphase flows based on high fidelity numerical simulation of gas-solids flow structures in risers and vertical columns obtained by the Multiphase Flow with Interphase eXchanges (MFIX) software. The research includes a numerical investigation of reacting and non-reacting gas-solids flow systems and computational analysis that will involve model development to accelerate the scale-up process for the design of fluidization systems by providingmore » accurate solutions that match the full-scale models. The computational work contributes to the development of a methodology for obtaining ROMs that is applicable to the system of gas-solid flows. Finally, the validity of the developed ROMs is evaluated by comparing the results against those obtained using the MFIX code. Additionally, the robustness of existing POD-based ROMs for multiphase flows is improved by avoiding non-physical solutions of the gas void fraction and ensuring that the reduced kinetics models used for reactive flows in fluidized beds are thermodynamically consistent.« less

Introducing Filters and Amplifiers Using a Two-Channel Light Organ

ERIC Educational Resources Information Center

Zavrel, Erik; Sharpsteen, Eric

2015-01-01

In an era when many students carry iPods, iPhones, and iPads, physics teachers are realizing that in order to continue to inspire and convey the amazing things made possible by a few fundamental principles, they must expand laboratory coverage of electricity and circuits beyond the conventional staples of constructing series and parallel…

Precise orbit determination using the batch filter based on particle filtering with genetic resampling approach

NASA Astrophysics Data System (ADS)

Kim, Young-Rok; Park, Eunseo; Choi, Eun-Jung; Park, Sang-Young; Park, Chandeok; Lim, Hyung-Chul

2014-09-01

In this study, genetic resampling (GRS) approach is utilized for precise orbit determination (POD) using the batch filter based on particle filtering (PF). Two genetic operations, which are arithmetic crossover and residual mutation, are used for GRS of the batch filter based on PF (PF batch filter). For POD, Laser-ranging Precise Orbit Determination System (LPODS) and satellite laser ranging (SLR) observations of the CHAMP satellite are used. Monte Carlo trials for POD are performed by one hundred times. The characteristics of the POD results by PF batch filter with GRS are compared with those of a PF batch filter with minimum residual resampling (MRRS). The post-fit residual, 3D error by external orbit comparison, and POD repeatability are analyzed for orbit quality assessments. The POD results are externally checked by NASA JPL’s orbits using totally different software, measurements, and techniques. For post-fit residuals and 3D errors, both MRRS and GRS give accurate estimation results whose mean root mean square (RMS) values are at a level of 5 cm and 10-13 cm, respectively. The mean radial orbit errors of both methods are at a level of 5 cm. For POD repeatability represented as the standard deviations of post-fit residuals and 3D errors by repetitive PODs, however, GRS yields 25% and 13% more robust estimation results than MRRS for post-fit residual and 3D error, respectively. This study shows that PF batch filter with GRS approach using genetic operations is superior to PF batch filter with MRRS in terms of robustness in POD with SLR observations.

Molecular basis of a shattering resistance boosting global dissemination of soybean

PubMed Central

Funatsuki, Hideyuki; Suzuki, Masaya; Hirose, Aya; Inaba, Hiroki; Yamada, Tetsuya; Hajika, Makita; Komatsu, Kunihiko; Katayama, Takeshi; Sayama, Takashi; Ishimoto, Masao; Fujino, Kaien

2014-01-01

Pod dehiscence (shattering) is essential for the propagation of wild plant species bearing seeds in pods but is a major cause of yield loss in legume and crucifer crops. Although natural genetic variation in pod dehiscence has been, and will be, useful for plant breeding, little is known about the molecular genetic basis of shattering resistance in crops. Therefore, we performed map-based cloning to unveil a major quantitative trait locus (QTL) controlling pod dehiscence in soybean. Fine mapping and complementation testing revealed that the QTL encodes a dirigent-like protein, designated as Pdh1. The gene for the shattering-resistant genotype, pdh1, was defective, having a premature stop codon. The functional gene, Pdh1, was highly expressed in the lignin-rich inner sclerenchyma of pod walls, especially at the stage of initiation in lignin deposition. Comparisons of near-isogenic lines indicated that Pdh1 promotes pod dehiscence by increasing the torsion of dried pod walls, which serves as a driving force for pod dehiscence under low humidity. A survey of soybean germplasm revealed that pdh1 was frequently detected in landraces from semiarid regions and has been extensively used for breeding in North America, the world’s leading soybean producer. These findings point to a new mechanism for pod dehiscence involving the dirigent protein family and suggest that pdh1 has played a crucial role in the global expansion of soybean cultivation. Furthermore, the orthologs of pdh1, or genes with the same role, will possibly be useful for crop improvement. PMID:25468966

Hydrologic Process Parameterization of Electrical Resistivity Imaging of Solute Plumes Using POD McMC

NASA Astrophysics Data System (ADS)

Awatey, M. T.; Irving, J.; Oware, E. K.

2016-12-01

Markov chain Monte Carlo (McMC) inversion frameworks are becoming increasingly popular in geophysics due to their ability to recover multiple equally plausible geologic features that honor the limited noisy measurements. Standard McMC methods, however, become computationally intractable with increasing dimensionality of the problem, for example, when working with spatially distributed geophysical parameter fields. We present a McMC approach based on a sparse proper orthogonal decomposition (POD) model parameterization that implicitly incorporates the physics of the underlying process. First, we generate training images (TIs) via Monte Carlo simulations of the target process constrained to a conceptual model. We then apply POD to construct basis vectors from the TIs. A small number of basis vectors can represent most of the variability in the TIs, leading to dimensionality reduction. A projection of the starting model into the reduced basis space generates the starting POD coefficients. At each iteration, only coefficients within a specified sampling window are resimulated assuming a Gaussian prior. The sampling window grows at a specified rate as the number of iteration progresses starting from the coefficients corresponding to the highest ranked basis to those of the least informative basis. We found this gradual increment in the sampling window to be more stable compared to resampling all the coefficients right from the first iteration. We demonstrate the performance of the algorithm with both synthetic and lab-scale electrical resistivity imaging of saline tracer experiments, employing the same set of basis vectors for all inversions. We consider two scenarios of unimodal and bimodal plumes. The unimodal plume is consistent with the hypothesis underlying the generation of the TIs whereas bimodality in plume morphology was not theorized. We show that uncertainty quantification using McMC can proceed in the reduced dimensionality space while accounting for the physics of the underlying process.

Flow temporal reconstruction from non-time-resolved data part I: mathematic fundamentals

NASA Astrophysics Data System (ADS)

Legrand, Mathieu; Nogueira, José; Lecuona, Antonio

2011-10-01

At least two circumstances point to the need of postprocessing techniques to recover lost time information from non-time-resolved data: the increasing interest in identifying and tracking coherent structures in flows of industrial interest and the high data throughput of global measuring techniques, such as PIV, for the validation of computational fluid dynamics (CFD) codes. This paper offers the mathematic fundamentals of a space--time reconstruction technique from non-time-resolved, statistically independent data. An algorithm has been developed to identify and track traveling coherent structures in periodic flows. Phase-averaged flow fields are reconstructed with a correlation-based method, which uses information from the Proper Orthogonal Decomposition (POD). The theoretical background shows that the snapshot POD coefficients can be used to recover flow phase information. Once this information is recovered, the real snapshots are used to reconstruct the flow history and characteristics, avoiding neither the use of POD modes nor any associated artifact. The proposed time reconstruction algorithm is in agreement with the experimental evidence given by the practical implementation proposed in the second part of this work (Legrand et al. in Exp Fluids, 2011), using the coefficients corresponding to the first three POD modes. It also agrees with the results on similar issues by other authors (Ben Chiekh et al. in 9 Congrès Francophone de Vélocimétrie Laser, Bruxelles, Belgium, 2004; Van Oudheusden et al. in Exp Fluids 39-1:86-98, 2005; Meyer et al. in 7th International Symposium on Particle Image Velocimetry, Rome, Italy, 2007a; in J Fluid Mech 583:199-227, 2007b; Perrin et al. in Exp Fluids 43-2:341-355, 2007). Computer time to perform the reconstruction is relatively short, of the order of minutes with current PC technology.

Risk-to-Benefit Ratio of Venous Thromboembolism Prophylaxis for Neurosurgical Procedures at a Quaternary Referral Center.

PubMed

Agarwal, Nitin; Zenonos, Georgios A; Agarwal, Prateek; Walch, Frank J; Roach, Eileen; Stokes, Sandra J; Friedlander, Robert M; Gerszten, Peter C

2018-03-09

Pharmacological prophylaxis for venous thromboembolism (VTE) in the neurosurgical population is still a matter of debate, as the risk-to-benefit ratio is not well defined. To further evaluate the risk-to-benefit ratio of VTE prophylaxis (VTEP) for all neurosurgical procedures. A prospective evaluation was performed after the initiation of a VTEP protocol for 11 436 patients undergoing neurosurgical procedures over 24 mo. Unless a bleeding complication was present, 5000 international units of subcutaneous heparin every 8 h was ordered on postoperative day (POD) 1 for spine, POD2 for cranial, and by POD4 for subdural, intracerebral, and epidural hematoma cases. Incidence of VTE and any subsequent bleeding complications were noted. A total of 70 VTEs (0.6% overall) were documented (28 deep vein thrombosis, 42 pulmonary embnolism). The highest rates of VTE were associated with deformity (6.7%); open cerebrovascular (6.5%); subdural, intracerebral, and epidural hematoma (3.2%); spinal trauma (2.4%); and craniotomy for tumor (1.6%) cases. Seven cases of deep vein thrombosis progressed to pulmonary embolisms, and 66 of 70 VTEs occurred while on pharmacological VTEP. Fifty-four bleeding complications occurred on or after POD2 following initiation of VTEP. These bleeding complications consisted of any new clinically or radiographically observed hemorrhages. Twenty-eight of the 54 delayed bleeding complications required operative intervention with 1 mortality. Forty-five patients were on anticoagulation when the initial bleeding event occurred. Overall, an estimated 0.5% incidence of delayed bleeding complications was noted with 99.4% of patients within the study cohort remaining VTE free. This VTEP protocol was determined to afford a good risk-to-benefit ratio for a wide variety of neurosurgical procedures.

FOCU:S--future operator control unit: soldier

NASA Astrophysics Data System (ADS)

O'Brien, Barry J.; Karan, Cem; Young, Stuart H.

2009-05-01

The U.S. Army Research Laboratory's (ARL) Computational and Information Sciences Directorate (CISD) has long been involved in autonomous asset control, specifically as it relates to small robots. Over the past year, CISD has been making strides in the implementation of three areas of small robot autonomy, namely platform autonomy, Soldier-robot interface, and tactical behaviors. It is CISD's belief that these three areas must be considered as a whole in order to provide Soldiers with useful capabilities. In addressing the Soldier-robot interface aspect, CISD has begun development on a unique dismounted controller called the Future Operator Control Unit: Soldier (FOCU:S) that is based on an Apple iPod Touch. The iPod Touch's small form factor, unique touch-screen input device, and the presence of general purpose computing applications such as a web browser combine to give this device the potential to be a disruptive technology. Setting CISD's implementation apart from other similar iPod or iPhone-based devices is the ARL software that allows multiple robotic platforms to be controlled from a single OCU. The FOCU:S uses the same Agile Computing Infrastructure (ACI) that all other assets in the ARL robotic control system use, enabling automated asset discovery on any type of network. Further, a custom ad hoc routing implementation allows the FOCU:S to communicate with the ARL ad hoc communications system and enables it to extend the range of the network. This paper will briefly describe the current robotic control architecture employed by ARL and provide short descriptions of existing capabilities. Further, the paper will discuss FOCU:S specific software developed for the iPod Touch, including unique capabilities enabled by the device's unique hardware.

Biosorption of copper ions from aqueous solution using rape straw powders: Optimization, equilibrium and kinetic studies.

PubMed

Liu, Xin; Chen, Zhao-Qiong; Han, Bin; Su, Chun-Li; Han, Qin; Chen, Wei-Zhong

2018-04-15

In this paper, the adsorption behaviors of Cu(II) from the aqueous solution using rape straw powders were studied. The effects of initial Cu(II) concentration, pH range and absorbent dosage on the adsorption efficiency of Cu(II) by rape straw powder were investigated by Box-Behnken Design based on response surface methodology. The values of coefficient constant of the nonlinear models were 0.9997, 0.9984 and 0.9944 for removal Cu(II) from aqueous solution using rape straw shell, seed pods and straw pith core, respectively, which could navigate the design space for various factors on effects of biosorption Cu(II) from aqueous solution. The various factors of pH and biosorbents dosage were the key factors that affecting the removal efficiency of Cu(II) from aqueous solution. The biosorption equilibrium data presented its favorable monolayer adsorption Cu(II) onto shell, seed pods and straw pith core, respectively. The pseudo-second order kinetic model was the proper approach to determine the adsorption kinetics. The biosorption of Cu(II) onto surfaces of rape straw powders were confirmed and ion-exchanged in the adsorption process by energy dispersive spectrometer. The critical groups, -OH, -CH, -NH 3 + , -CH 3 , -NH and -C-O, exhibited by the infrared spectra results, changed to suggest that these groups played critical roles, especially -CH 3 in the adsorption of copper ions onto rape straw powders. The study provided evidences that rape straw powders can be used for removing Cu(II) from aqueous water. Copyright © 2017 Elsevier Inc. All rights reserved.

Internet's impact on publishing

NASA Astrophysics Data System (ADS)

Beretta, Giordano B.

1997-04-01

In 1990, the first monochrome print-on-demand (POD) systems wee successfully brought to market. Subsequent color versions have been less successful, in my view mostly because they require a different workflow than traditional systems and the highly skilled specialists have not been trained. This hypothesis is based on the observation that direct-to-plate systems for short run printing, which do not require a new workflow, are quite successful in the market place. The internet and the World Wide Web are the enabling technologies that are fostering a new print model that is very likely to replace color POD before the latter can establish itself. In this model the consumers locate the material they desire from a contents provider, pay through a digital cash clearinghouse, and print the material at their own cost on their local printer. All the basic technologies for this model are in place; the main challenge is to make the workflow sufficiently robust for individual use.

AdVEGF-All6A+ Preconditioning of Murine Ischemic Skin Flaps Is Comparable to Surgical Delay.

PubMed

Gersch, Robert P; Fourman, Mitchell S; Phillips, Brett T; Nasser, Ahmed; McClain, Steve A; Khan, Sami U; Dagum, Alexander B; Bui, Duc T

2015-08-01

Surgical flap delay is commonly used in preconditioning reconstructive flaps to prevent necrosis. However, staged procedures are not ideal. Pharmacologic up-regulation of angiogenic and arteriogenic factors before flap elevation poses a nonsurgical approach to improve flap survival. Male Sprague Dawley rats were divided into control (n = 16), surgical delay (Delay), AdNull, AdEgr-1, and AdVEGF (n ≥ 9/group) groups. Delay rats had a 9 cm × 3 cm cranial based pedicle skin flap incised 10 days prior to elevation. Adenoviral groups received 28 intradermal injections (10(9) pu/animal total) throughout the distal two thirds of the flap 1 week prior to elevation. At postoperative day (POD) 0 flaps were elevated and silicone sheeting was placed between flap and wound bed. Perfusion analysis in arbitrary perfusion units of the ischemic middle third of the flap using laser Doppler imaging was conducted preoperatively and on POD 0, 3, and 7. Clinical and histopathologic assessments of the skin flaps were performed on POD 7. AdVEGF (50.8 ± 10.9 APU) and AdEgr-1 (39.3 ± 10.6 APU) perfusion levels were significantly higher than controls (16.5 ± 4.2 APU) on POD 7. Delay models were equivalent to controls (25.9 ± 6.8 APU). AdVEGF and Delay animals showed significantly more viable surface area on POD 7 (14.4 ± 1.3 cm(2), P < 0.01 and 12.4 ± 1.2 cm(2), P < 0.05, respectively) compared with Controls (8.7 ± 0.7 cm(2)). AdVEGF preconditioning resulted in flap survival comparable to surgical delay. Adenoviral preconditioning maintained perfusion levels postoperatively while surgical delay did not.

AdVEGF-All6A+ Preconditioning of Murine Ischemic Skin Flaps Is Comparable to Surgical Delay

PubMed Central

Gersch, Robert P.; Fourman, Mitchell S.; Phillips, Brett T.; Nasser, Ahmed; McClain, Steve A.; Khan, Sami U.; Dagum, Alexander B.

2015-01-01

Background: Surgical flap delay is commonly used in preconditioning reconstructive flaps to prevent necrosis. However, staged procedures are not ideal. Pharmacologic up-regulation of angiogenic and arteriogenic factors before flap elevation poses a nonsurgical approach to improve flap survival. Methods: Male Sprague Dawley rats were divided into control (n = 16), surgical delay (Delay), AdNull, AdEgr-1, and AdVEGF (n ≥ 9/group) groups. Delay rats had a 9 cm × 3 cm cranial based pedicle skin flap incised 10 days prior to elevation. Adenoviral groups received 28 intradermal injections (109 pu/animal total) throughout the distal two thirds of the flap 1 week prior to elevation. At postoperative day (POD) 0 flaps were elevated and silicone sheeting was placed between flap and wound bed. Perfusion analysis in arbitrary perfusion units of the ischemic middle third of the flap using laser Doppler imaging was conducted preoperatively and on POD 0, 3, and 7. Clinical and histopathologic assessments of the skin flaps were performed on POD 7. Results: AdVEGF (50.8 ± 10.9 APU) and AdEgr-1 (39.3 ± 10.6 APU) perfusion levels were significantly higher than controls (16.5 ± 4.2 APU) on POD 7. Delay models were equivalent to controls (25.9 ± 6.8 APU). AdVEGF and Delay animals showed significantly more viable surface area on POD 7 (14.4 ± 1.3 cm2, P < 0.01 and 12.4 ± 1.2 cm2, P < 0.05, respectively) compared with Controls (8.7 ± 0.7 cm2). Conclusions: AdVEGF preconditioning resulted in flap survival comparable to surgical delay. Adenoviral preconditioning maintained perfusion levels postoperatively while surgical delay did not. PMID:26495207

Genetic Parameters and the Impact of Off-Types for Theobroma cacao L. in a Breeding Program in Brazil

PubMed Central

DuVal, Ashley; Gezan, Salvador A.; Mustiga, Guiliana; Stack, Conrad; Marelli, Jean-Philippe; Chaparro, José; Livingstone, Donald; Royaert, Stefan; Motamayor, Juan C.

2017-01-01

Breeding programs of cacao (Theobroma cacao L.) trees share the many challenges of breeding long-living perennial crops, and genetic progress is further constrained by both the limited understanding of the inheritance of complex traits and the prevalence of technical issues, such as mislabeled individuals (off-types). To better understand the genetic architecture of cacao, in this study, 13 years of phenotypic data collected from four progeny trials in Bahia, Brazil were analyzed jointly in a multisite analysis. Three separate analyses (multisite, single site with and without off-types) were performed to estimate genetic parameters from statistical models fitted on nine important agronomic traits (yield, seed index, pod index, % healthy pods, % pods infected with witches broom, % of pods other loss, vegetative brooms, diameter, and tree height). Genetic parameters were estimated along with variance components and heritabilities from the multisite analysis, and a trial was fingerprinted with low-density SNP markers to determine the impact of off-types on estimations. Heritabilities ranged from 0.37 to 0.64 for yield and its components and from 0.03 to 0.16 for disease resistance traits. A weighted index was used to make selections for clonal evaluation, and breeding values estimated for the parental selection and estimation of genetic gain. The impact of off-types to breeding progress in cacao was assessed for the first time. Even when present at <5% of the total population, off-types altered selections by 48%, and impacted heritability estimations for all nine of the traits analyzed, including a 41% difference in estimated heritability for yield. These results show that in a mixed model analysis, even a low level of pedigree error can significantly alter estimations of genetic parameters and selections in a breeding program. PMID:29250097

Serum hCG-β levels of postovulatory day 12 and 14 with the sequential application of hCG-β fold change significantly increased predictability of pregnancy outcome after IVF-ET cycle.

PubMed

Sung, Nayoung; Kwak-Kim, Joanne; Koo, H S; Yang, K M

2016-09-01

To investigate hCG-β level on postovulatory day (POD) 12 and its fold increase as predictors for pregnancy outcome after in vitro fertilization (IVF) cycles. A retrospective cohort study was performed in total 1408 fresh and 598 frozen cycles between November 2008 and October 2011, which resulted in biochemical pregnancy, early pregnancy loss, or live birth of singleton pregnancy. The serum hCG-β levels of POD 12 and 14 were compared among biochemical pregnancy, early pregnancy loss, and live birth groups. The cutoff values of POD 12 and 14 hCG-β levels and the degree of hCG-β increase from POD 12 to 14 were determined for each pregnancy outcome. POD 12 and 14 hCG-β levels stratified based on pregnancy outcomes were significantly different among the biochemical pregnancy, early pregnancy loss, and live birth in both fresh and frozen cycles. Serum hCG-β levels of POD 12 and 14 and the fold increase of hCG-β levels from POD 12 to 14 significantly predict pregnancy outcomes after fresh and frozen cycles. Among these, the cutoff value of POD 14 hCG-β had the highest sensitivity and positive predictive value (PPV). In fresh cycles, the cutoff values of POD 12 and 14 serum hCG-β levels for clinical pregnancies were 30.2 mIU/mL (sensitivity 81.3 %, specificity 79.6 %, and PPV 92.3 %) and 70.5 mIU/mL (sensitivity 88.4 %, specificity 85.2 %, and PPV 94.7 %). In pregnancies with POD 12 serum hCG-β levels ≥30.2 mIU/mL, the cutoff level of increase of hCG-β for clinical pregnancy was 2.56 (sensitivity 73.6 %, specificity 72.4 %, and PPV 97.8 %). Sequential application of cutoff values such as POD 12 hCG-β and fold increase of hCG-β improved predictability of pregnancy outcome as compared with that of POD 12 hCG-β alone. The cutoff values of POD 12 and 14 serum hCG-β levels for live birth were 40.5 mIU/mL (sensitivity 75.2 %, specificity 72.6 %, PPV 78.9 %) and 104.5 mIU/mL (sensitivity 80.3 %, specificity 74.1 %, PPV 80.8 %). In the frozen cycles, the cutoff values of POD 12 and 14 serum hCG-β level for clinical pregnancy were 31.5 IU/L (sensitivity 80.4 %, specificity 71.1 % and PPV 90 %) and 43.5 mIU/mL (sensitivity 72.6 %, specificity 71.7 %, PPV 77.2 %). In pregnancies with POD 12 serum hCG-β level ≥31.5 mIU/mL, the cutoff value for fold increase of hCG-β was 2.38 for clinical pregnancy (sensitivity 81.6 %, specificity 71.4 % and PPV 87.9 %). The cutoff values of POD 12 and 14 for live birth were 43.5 mIU/mL (sensitivity 72.6 %, specificity 71.7 %, PPV 77.2 %) and 101.6 mIU/mL (sensitivity 79.6 %, specificity 71.1 %, PPV 78.4 %). Sequential application of cutoff values for POD 12 hCG-β level and fold increase of hCG-β significantly increased PPV for live birth but not clinical pregnancy in frozen cycles. Early prediction of pregnancy outcome by using POD 12 and 14 cutoff levels and sequential application of cutoff value of fold increase could provide appropriate reference to health care providers to initiate earlier management of high-risk pregnancies and precise follow-up of abnormal pregnancies.

Recommended approaches in the application of ...

EPA Pesticide Factsheets

ABSTRACT:Only a fraction of chemicals in commerce have been fully assessed for their potential hazards to human health due to difficulties involved in conventional regulatory tests. It has recently been proposed that quantitative transcriptomic data can be used to determine benchmark dose (BMD) and estimate a point of departure (POD). Several studies have shown that transcriptional PODs correlate with PODs derived from analysis of pathological changes, but there is no consensus on how the genes that are used to derive a transcriptional POD should be selected. Because of very large number of unrelated genes in gene expression data, the process of selecting subsets of informative genes is a major challenge. We used published microarray data from studies on rats exposed orally to multiple doses of six chemicals for 5, 14, 28, and 90 days. We evaluated eight different approaches to select genes for POD derivation and compared them to three previously proposed approaches. The relationship between transcriptional BMDs derived using these 11 approaches were compared with PODs derived from apical data that might be used in a human health risk assessment. We found that transcriptional benchmark dose values for all 11 approaches were remarkably aligned with different apical PODs, while a subset of between 3 and 8 of the approaches met standard statistical criteria across the 5-, 14-, 28-, and 90-day time points and thus qualify as effective estimates of apical PODs. Our r

[The peroxidase content of human tears].

PubMed

Buchberger, W; Rieger, G

1989-01-01

The peroxidase-(POD)-thiocyanate-hydrogenperoxide-system is a well-known antibacterial system, which has been demonstrated to exist, for example, in milk and saliva. Earlier investigations by van Haeringen et al. established a POD level in human tears of 10(3) units/l, yet the thiocyanate concentration was only about 0.2 mmol/l. Therefore van Haeringen et al. excluded the existence of a POD-thiocyanate-hydrogenperoxide antibacterial system in human tears because of the insufficient amount of thiocyanate in the tears examined. Instead of thiocyanate halides such as J- can also complete the POD hydrogen peroxide system as electron donors. Sufficient amounts of iodide can be expected after the application of iodine-containing eye drops or after local treatment with iodine-containing brine, as done in Bad Hall in Austria. Therefore, the above mentioned antibacterial system may be of importance if the POD-level is high enough (greater than 250 units/l). We investigated 22 tear samples from healthy persons: the POD levels were below 20 units/l in 19 cases; in 3 cases the POD concentration was found to be between 20 and 50 units/l. Therefore, in normal human tear fluid, not only the amount of thiocyanate but also the concentration of POD is too low for effective antimicrobial activity of the peroxidase-thiocyanate-hydrogenperoxide system. It is so far not known whether this system is effective under pathological conditions.

Drain Management after Pancreatoduodenectomy: Reappraisal of a Prospective Randomized Trial Using Risk Stratification.

PubMed

McMillan, Matthew T; Malleo, Giuseppe; Bassi, Claudio; Butturini, Giovanni; Salvia, Roberto; Roses, Robert E; Lee, Major K; Fraker, Douglas L; Drebin, Jeffrey A; Vollmer, Charles M

2015-10-01

A recent randomized trial used the Fistula Risk Score (FRS) to develop guidelines for selective drainage based on clinically relevant fistula (CR-POPF) risk. Additionally, postoperative day (POD) 1 drain and serum amylase have been identified as accurate postoperative predictors of CR-POPF. This study sought to identify patients who may benefit from selective drainage, as well as the optimal timing for drain removal after pancreatoduodenectomy. One hundred six pancreatoduodenectomies from a previously reported RCT were assessed using risk-adjustment. The incidence of CR-POPF was compared between FRS risk cohorts. Drain and serum amylase values from POD 1 were evaluated using receiver operating characteristic (ROC) analysis to establish cut-offs predictive of CR-POPF occurrence. A regression analysis compared drain removal randomizations (POD 3 vs POD 5). Three-quarters of patients had moderate/high CR-POPF risk. This group had a CR-POPF rate of 36.3% vs 7.7% among negligible/low risk patients (p = 0.005). The areas under the ROC curve for CR-POPF prediction using POD 1 drain and serum amylase values were 0.800 (p = 0.000001; 95% CI 0.70-0.90) and 0.655 (p = 0.012; 95% CI 0.55-0.77), respectively. No significant serum amylase cut-offs were identified. Moderate/high risk patients with POD 1 drain amylase ≤ 5,000 U/L had significantly lower rates of CR-POPF when randomized to POD 3 drain removal (4.2% vs 38.5%; p = 0.003); moreover, these patients experienced fewer complications and shorter hospital stays. A clinical care protocol is proposed whereby drains are recommended for moderate/high FRS risk patients, but may be omitted in patients with negligible/low risk. Drain amylase values in moderate/high risk patients should then be evaluated on POD 1 to determine the optimal timing for drain removal. Moderate/high risk patients with POD 1 drain amylase ≤ 5,000 U/L have lower rates of CR-POPF with POD 3 (vs POD ≥ 5) drain removal; early drain removal is recommended for these patients. Copyright © 2015 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

78 FR 41361 - Notice of Request for Extension of Approval of an Information Collection; Interstate Movement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-10

..., jackfruit, fresh pods of cowpea and its relatives, dragon fruit, mangosteen, moringa pods, and melon must..., moringa pods, and melon in Hawaii. Estimated annual number of respondents: 110. Estimated annual number of...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banerjee, Tirtha; Vercauteren, Nikki; Muste, Marian

Flume experiments with particle imaging velocimetry (PIV) were conducted recently to study a complex flow problem where wind shear acts on the surface of a static water body in presence of flexible emergent vegetation and induces a rich dynamics of wave–turbulence–vegetation interaction inside the water body without any gravitational gradient. The experiments were aimed at mimicking realistic vegetated wetlands and the present work is targeted to improve the understanding of the coherent structures associated with this interaction by employing a combination of techniques such as quadrant analysis, proper orthogonal decomposition (POD), Shannon entropy and mutual information content (MIC). The turbulentmore » transfer of momentum is found to be dominated by organized motions such as sweeps and ejections, while the wave component of vertical momentum transport does not show any such preference. Furthermore, by reducing the data using POD we see that wave energy for large flow depths and turbulent energy for all water depths is concentrated among the top few modes, which can allow development of simple reduced order models. Vegetation flexibility is found to induce several roll type structures, however if the vegetation density is increased, drag effects dominate over flexibility and organize the flow. The interaction between waves and turbulence is also found to be highest among flexible sparse vegetation. But, rapidly evolving parts of the flow such as the air–water interface reduces wave–turbulence interaction.« less

FaPOD27 functions in the metabolism of polyphenols in strawberry fruit (Fragaria sp.)

PubMed Central

Yeh, Su-Ying; Huang, Fong-Chin; Hoffmann, Thomas; Mayershofer, Mechthild; Schwab, Wilfried

2014-01-01

The strawberry (Fragaria × ananassa) is one of the most preferred fresh fruit worldwide, accumulates numerous flavonoids but has limited shelf life due to excessive tissue softening caused by cell wall degradation. Since lignin is one of the polymers that strengthen plant cell walls and might contribute to some extent to fruit firmness monolignol biosynthesis was studied in strawberry fruit. Cinnamoyl-CoA reductase (CCR), cinnamyl alcohol dehydrogenase (CAD), and a peroxidase (POD27) gene were strongly expressed in red, ripe fruit whereas a second POD gene was primarily expressed in green, immature fruit. Moreover, FaPOD27 transcripts were strongly and constitutively induced in fruits exposed to Agrobacterium infection. Gene expression levels and enzymatic activities of FaCCR and FaCAD were efficiently suppressed through RNAi in FaCCR- and FaCAD-silenced strawberries. Besides, significantly elevated FaPOD transcript levels were detected after agroinfiltration of pBI-FaPOD constructs in fruits. At the same time, levels of G-monomers were considerably reduced in FaCCR-silenced fruits whereas the proportion of both G- and S-monomers decisively decreased in FaCAD-silenced and pBI-FaPOD fruits. Development, firmness, and lignin level of the treated fruits were similar to pBI-intron control fruits, presumably attributed to increased expression levels of FaPOD27 upon agroinfiltration. Additionally, enhanced firmness, accompanied with elevated lignin levels, was revealed in chalcone synthase-deficient fruits (CHS−), independent of down- or up-regulation of individual and combined FaCCR. FaCAD, and FaPOD genes by agroinfiltration, when compared to CHS−/pBI-intron control fruits. These approaches provide further insight into the genetic control of flavonoid and lignin synthesis in strawberries. The results suggest that FaPOD27 is a key gene for lignin biosynthesis in strawberry fruit and thus to improving the firmness of strawberries. PMID:25346738

Expected orbit determination performance for the TOPEX/Poseidon mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nerem, R.S.; Putney, B.H.; Marshall, J.A.

1993-03-01

The TOPEX/Poseidon (T/P) mission, launched during the summer of 1992, has the requirement that the radial component of its orbit must be computed to an accuracy of 13 cm root-mean-square (rms) or better, allowing measurements of the sea surface height to be computed to similar accuracy when the satellite height is differenced with the altimeter measurements. This will be done by combining precise satellite tracking measurements with precise models of the forces acting on the satellite. The Space Geodesy Branch at Goddard Space Flight Center (GSFC), as part of the T/P precision orbit determination (POD) Team, has the responsibility withinmore » NASA for the T/P precise orbit computations. The prelaunch activities of the T/P POD Team have been mainly directed towards developing improved models of the static and time-varying gravitational forces acting on T/P and precise models for the non-conservative forces perturbing the orbit of T/P such as atmospheric drag, solar and Earth radiation pressure, and thermal imbalances. The radial orbit error budget for T/P allows 10 cm rms error due to gravity field mismodeling, 3 cm due to solid Earth and ocean tides, 6 cm due to radiative forces, and 3 cm due to atmospheric drag. A prelaunch assessment of the current modeling accuracies for these forces indicates that the radial orbit error requirements can be achieved with the current models, and can probably be surpassed once T/P tracking data are used to fine tune the models. Provided that the performance of the T/P spacecraft is nominal, the precise orbits computed by the T/P POD Team should be accurate to 13 cm or better radially.« less

Breeding behaviour of pilot whales revealed by DNA fingerprinting.

PubMed

Amos, B; Barrett, J; Dover, G A

1991-08-01

Most species of whale spend the majority of their lives well away from land, are capable of migrating over large distances and are difficult to identify individually. However, conservation measures require a detailed understanding of their social structure, breeding behaviour and migration patterns. The advent of DNA fingerprinting permits a systematic investigation of such parameters. In the Faeroe Islands there exists a traditional harvest of long-finned pilot whales (Globicephala melas), in which intact social groups (pods) are captured. This affords a unique opportunity to study genetic relationships within and between pods. We report here on a paternity analysis, using DNA fingerprinting, of mother-fetus pairs and males sampled from complete pods. In addition, a single, highly polymorphic minisatellite locus was used to infer degrees of relatedness between groups of fetuses and females. Taken together, our results suggest that pods consist of closely related adult females and their offspring. Sexually mature males either move frequently between pods or remain in their natal pod but refrain from mating with female relatives. Whichever hypothesis is correct, the data suggest that each male spends only a few months with the female post-mating and individual males often father several fetuses within a pod.

Metabolic changes in different developmental stages of Vanilla planifolia pods.

PubMed

Palama, Tony Lionel; Khatib, Alfi; Choi, Young Hae; Payet, Bertrand; Fock, Isabelle; Verpoorte, Robert; Kodja, Hippolyte

2009-09-09

The metabolomic analysis of developing Vanilla planifolia green pods (between 3 and 8 months after pollination) was carried out by nuclear magnetic resonance (NMR) spectroscopy and multivariate data analysis. Multivariate data analysis of the (1)H NMR spectra, such as principal component analysis (PCA) and partial least-squares-discriminant analysis (PLS-DA), showed a trend of separation of those samples based on the metabolites present in the methanol/water (1:1) extract. Older pods had a higher content of glucovanillin, vanillin, p-hydroxybenzaldehyde glucoside, p-hydroxybenzaldehyde, and sucrose, while younger pods had more bis[4-(beta-D-glucopyranosyloxy)-benzyl]-2-isopropyltartrate (glucoside A), bis[4-(beta-D-glucopyranosyloxy)-benzyl]-2-(2-butyl)tartrate (glucoside B), glucose, malic acid, and homocitric acid. A liquid chromatography-mass spectrometry (LC-MS) analysis targeted at phenolic compound content was also performed on the developing pods and confirmed the NMR results. Ratios of aglycones/glucosides were estimated and thus allowed for detection of more minor metabolites in the green vanilla pods. Quantification of compounds based on both LC-MS and NMR analyses showed that free vanillin can reach 24% of the total vanillin content after 8 months of development in the vanilla green pods.

75 FR 31785 - Pesticide Products; Registration Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-04

... 5.96%. Propose uses: Barley, corn, dried shelled peas and beans, edible podded legumes vegetables... peas and beans, edible podded legume vegetables, oat, peanut, rye, sorghum, soybean, sunflower, wheat..., edible podded legume vegetables, oat, peanut, rye, sorghum, soybean, sunflower, wheat, and triticale seed...

Reconstruction of Acoustic Exposure on Orcas in Haro Strait

DTIC Science & Technology

2009-01-01

Resident killer whales (Orcinus orca) (J pod).1 The class shadowed the J pod from their boat, recording its behavior, the GPS loca- tion of the...one of the resident pods of orcas, raising the question of the sonar’s impact on them. Due to two coincidental activities, this question can be...addressed in detail. Coinciding with Shoup’s transit, a marine mammal class from Friday Harbor Labs led by Dr. David Bain was observing a pod of Southern

Thermospheric density estimation from SLR observations of LEO satellites - A case study with the ANDE-Pollux satellite

NASA Astrophysics Data System (ADS)

Blossfeld, M.; Schmidt, M.; Erdogan, E.

2016-12-01

The thermospheric neutral density plays a crucial role within the equation of motion of Earth orbiting objects since drag, lift or side forces are one of the largest non-gravitational perturbations acting on the satellite. Precise Orbit Determination (POD) methods can be used to estimate thermospheric density variations from measured orbit determinations. One method which provides highly accurate measurements of the satellite position is Satellite Laser Ranging (SLR). Within the POD process, scaling factors are estimated frequently. These scaling factors can be either used for the scaling of the so called satellite-specific drag (ballistic) coefficients or the integrated thermospheric neutral density. We present a method for analytically model the drag coefficient based on a couple of physical assumptions and key parameters. In this paper, we investigate the possibility to use SLR observations to the very low Earth orbiting satellite ANDE-Pollux (approximately at 350km altitude) to determine scaling factors for different a priori thermospheric density models. We perform a POD for ANDE-Pollux covering 49 days between August 2009 and September 2009 which means the time span containing the largest number of observations during the short lifetime of the satellite. Finally, we compare the obtained scaled thermospheric densities w.r.t. each other

Fish Pectoral Fin Hydrodynamics; Part III: Low Dimensional Models via POD Analysis

NASA Astrophysics Data System (ADS)

Bozkurttas, M.; Madden, P.

2005-11-01

The highly complex kinematics of the pectoral fin and the resulting hydrodynamics does not lend itself easily to analysis based on simple notions of pitching/heaving/paddling kinematics or lift/drag based propulsive mechanisms. A more inventive approach is needed to dissect the fin gait and gain insight into the hydrodynamic performance of the pectoral fin. The focus of the current work is on the hydrodynamics of the pectoral fin of a bluegill sunfish in steady forward motion. The 3D, time-dependent fin kinematics is obtained via a stereo-videographic technique. We employ proper orthogonal decomposition to extract the essential features of the fin gait and then use CFD to examine the hydrodynamics of simplified gaits synthesized from the POD modes. The POD spectrum shows that the first two, three and five POD modes capture 55%, 67%, and 80% of the motion respectively. The first three modes are in particular highly distinct: Mode-1 is a ``cupping'' motion where the fin cups forward as it is abducted; Mode-2 is an ``expansion'' motion where the fin expands to present a larger area during adduction and finally Mode-3 involves a ``spanwise flick'' of the dorsal edge of the fin. Numerical simulation of flow past fin gaits synthesized from these modes lead to insights into the mechanisms of thrust production; these are discussed in detail.

SU-E-I-79: Effect of Number of Pinholes in Onboard Robotic Multi-Pinhole SPECT System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Touch, M; Bowsher, J; Yan, S

Purpose: To study the effect of number of pinholes for a novel Single Photon Emission Computed Tomography (SPECT) system for onboard molecular and functional imaging. Methods: Comparison studies were performed using simulation for the 49-pinhole SPECT system and a series of reductions in number of pinholes. Trajectories about the breast of a supine patient were considered. Minimum distances, radii of rotation (RORs), were determined by requirements to fully view the region of interest (ROI) and to avoid collision between the detector and the patient. Reductions in RORs translate into improvements in sensitivity. Starting from the 49-pinhole system, pinholes were removedmore » pod by pod. The furthest two end pods in the Sup-Inf direction were removed first for their higher likelihood of alleviating the collision avoidance criteria. After iterating through different combinations of pinhole pods, and selecting three combinations, the corresponding RORs were used to analytically calculate sensitivities. Results: Based on the Methods procedure, 3 combination of pods removal were identified: 1) Superior peripheral pod 2) Inferior peripheral pod 3) both pods. RORs were reduced at only one multi-pinhole stop. Analytic calculation showed that sensitivities were reduced from 0.032 for the 49-pinhole system to 0.028 for 42-pinhole and to 0.023 for 39-pinhole system respectively. The sensitivity per pinhole detector was approximately the same for all three cases. Conclusion: For the trajectories considered, only minimal improvements in RORs were identified by removing pinhole pods. Consequently, sensitivities decreased in proportion to the number of pinholes. Studies of other anatomical sites are needed to determine if in some cases sensitivity per pinhole can be improved by removing some pinholes. PHS/NIH/NCI grant R21-CA156390-01A1.« less

In vitro fermentation characteristics and effective utilisable crude protein in leaves and green pods of Moringa stenopetala and Moringa oleifera cultivated at low and mid-altitudes.

PubMed

Melesse, A; Steingass, H; Boguhn, J; Rodehutscord, M

2013-06-01

This study was conducted to assess the in vitro nutrient digestibility and utilisation of leaves and green pods of two Moringa species in supplementing the feed of ruminant animals during the dry season. Samples were analysed for proximate nutrients using official methods. The metabolisable energy (ME), organic matter digestibility (OMD) and effective utilisable crude protein (uCP) were estimated using the Hohenheim in vitro gas test method. Gas volume in Moringa stenopetala leaves and green pods was generally higher than those of Moringa oleifera. Gas volume for leaves was similar between low and mid-altitudes but was higher for green pods at mid-altitude. M. stenopetala leaves contained significantly higher ME (9.8 MJ/kg DM) and OMD (75%) than those of M. oleifera. Similarly, M. stenopetala green pods had higher ME and OMD values than those of M. oleifera. For green pods, the ME and OMD values were significantly higher at mid-altitude than those at low altitude although these values for leaves were similar between both altitudes. Moringa oleifera leaves had higher effective uCP than those of M. stenopetala. Nevertheless, the effective uCP was higher for green pods of M. stenopetala than those of M. oleifera. The effective uCP for leaves cultivated at mid-altitude was slightly higher than those at low altitude. This study suggested that leaves and green pods could be used as alternative energy and protein supplements for tropical ruminants, particularly during dry periods. It was further concluded that leaves were generally better in nutrient compositions and in vitro nutrient digestibility characteristics than green pods. © 2012 Blackwell Verlag GmbH.

Randomized controlled trial to compare oral analgesic requirements and patient satisfaction in using oral non-steroidal anti-inflammatory drugs versus benzydamine hydrochloride oral rinses after mandibular third molar extraction: a pilot study.

PubMed

Goswami, Devalina; Jain, Gaurav; Mohod, Mangesh; Baidya, Dalim Kumar; Bhutia, Ongkila; Roychoudhury, Ajoy

2018-02-01

Third molar extraction is associated with considerable pain and discomfort, which is mostly managed with oral analgesic medication. We assessed the analgesic effect of benzydamine hydrochloride, a topical analgesic oral rinse, for controlling postoperative pain following third molar extraction. A randomized controlled trial was conducted in 40 patients divided into two groups, for extraction of fully erupted third molar. Groups A received benzydamine hydrochloride mouthwash and group B received normal saline gargle with oral ibuprofen and paracetamol. Oral ibuprofen and paracetamol was the rescue analgesic drug in group A. Patients were evaluated on the 3 rd and 7 th post-operative days (POD) for pain using the visual analogue score (VAS), trismus, total number of analgesics consumed, and satisfaction level of patients. The VAS in groups A and B on POD3 and POD7 was 4.55 ± 2.54 and 3.95 ± 1.8, and 1.2 ± 1.64 and 0.95 ± 1.14, respectively and was statistically insignificant. The number of analgesics consumed in groups A and B on POD3 (5.25 ± 2.22 and 6.05 ± 2.43) was not statistically different from that consumed on POD7 (9.15 ± 5.93 and 10.65 ± 6.46). The p values for trismus on POD3 and POD7 were 0.609 and 0.490, respectively and those for patient satisfaction level on POD3 and POD7 were 0.283 and 0.217, respectively. Benzydamine hydrochloride oral rinses do not significantly reduce intake of oral analgesics and are inadequate for pain relief following mandibular third molar extraction.

Surveillance of paediatric exposures to liquid laundry detergent pods in Italy

PubMed Central

Settimi, Laura; Giordano, Felice; Lauria, Laura; Celentano, Anna; Sesana, Fabrizio; Davanzo, Franca

2018-01-01

Objective To analyse paediatric exposures to pod and traditional laundry detergents in Italy and changes in exposure trends. Methods Analyses of a series of patients aged <5 years and exposed to laundry detergents between September 2010 and June 2015, identified by the National Poison Control in Milan. Results In comparison with patients exposed to traditional laundry detergents (n=1150), a higher proportion of those exposed to pods (n=1649) were managed in hospital (68% vs 42%), had clinical effects (75% vs 22%) and moderate/high severity outcomes (13% vs <1%). Exposure rates were stable over time for traditional detergents (average 0.65 cases/day), but an abrupt decline in major company pods was seen in December 2012, 4 months after the introduction of opaque outer packaging (from 1.03 to 0.36 cases/day and from 1.88 to 0.86 cases/million units sold). The odds of clinical effects was higher for exposure to pods than for traditional detergents (OR=10.8; 95% CI 9.0 to 12.9). Among patients exposed to pods, the odds of moderate/high severity outcomes was four times higher for children aged <1 years than for the other age groups (OR=3.9; 95% CI 2.2 to 7.0). Ten children exposed to laundry detergent pods had high severity outcomes while no children exposed to traditional laundry detergents developed high severity effects. Conclusions The study confirms that exposure to laundry detergent pods is more dangerous than exposure to traditional detergents. In Italy, 4 months after the introduction of opaque outer packaging by a major company, product-specific exposure rates decreased sharply, suggesting that reducing visibility of laundry detergent pods may be an effective preventive measure. Further efforts are needed to improve safety. PMID:28188147

Molecular Diversity Analysis and Genetic Mapping of Pod Shatter Resistance Loci in Brassica carinata L.

PubMed Central

Raman, Rosy; Qiu, Yu; Coombes, Neil; Song, Jie; Kilian, Andrzej; Raman, Harsh

2017-01-01

Seed lost due to easy pod dehiscence at maturity (pod shatter) is a major problem in several members of Brassicaceae family. We investigated the level of pod shatter resistance in Ethiopian mustard (Brassica carinata) and identified quantitative trait loci (QTL) for targeted introgression of this trait in Ethiopian mustard and its close relatives of the genus Brassica. A set of 83 accessions of B. carinata, collected from the Australian Grains Genebank, was evaluated for pod shatter resistance based on pod rupture energy (RE). In comparison to B. napus (RE = 2.16 mJ), B. carinata accessions had higher RE values (2.53 to 20.82 mJ). A genetic linkage map of an F2 population from two contrasting B. carinata selections, BC73526 (shatter resistant with high RE) and BC73524 (shatter prone with low RE) comprising 300 individuals, was constructed using a set of 6,464 high quality DArTseq markers and subsequently used for QTL analysis. Genetic analysis of the F2 and F2:3 derived lines revealed five statistically significant QTL (LOD ≥ 3) that are linked with pod shatter resistance on chromosomes B1, B3, B8, and C5. Herein, we report for the first time, identification of genetic loci associated with pod shatter resistance in B. carinata. These characterized accessions would be useful in Brassica breeding programs for introgression of pod shatter resistance alleles in to elite breeding lines. Molecular markers would assist marker-assisted selection for tracing the introgression of resistant alleles. Our results suggest that the value of the germplasm collections can be harnessed through genetic and genomics tools. PMID:29250080

[Comparison of immune response after laparoscopic and open surgery for colorectal carcinoma: a meta-analysis].

PubMed

Song, Hu; Song, Jun; Liang, Yong; Fu, Wei; Xu, Yixin; Zheng, Junnian; Xu, Wei

2014-08-01

To compare the immune function after laparoscopic surgery (LS) and conventional open surgery(OS) for colorectal cancer (CRC). PubMed, EMBASE, the Cochrane Library, China National Knowledge Infrastructure (CNKI), and Wanfang Database were systematically searched for randomized controlled trials published before August 2013 concerning the immunological difference between LS and OS. Data extraction was performed independently by two reviewers and data analysis was performed using Review Manager ver. 4.3.1. Twelve studies including 638 patients (307 in LS group and 331 in OS group) were eligible for analysis. Overall analysis demonstrated that no significant differences were identified for blood C-reactive protein level on postoperative days (POD) 0-1 (P=0.40), plasma lymphocyte count on POD 1-3 (P=0.92) and POD 4-7 (P=0.64), plasma CD4⁺ T cell count on POD 1-7 (P=0.63), plasma CD8⁺ T cell count on POD 4-7 (P=0.09), and plasma NK cell count POD 1-3 (P=0.34) as well as POD 4-7 (P=0.46). Data analysis also showed that a significantly lower serum level of IL-6 on POD 0-1 after LS (WMD=-25.03, 95% CI:-34.06 to -15.99, P=0.000), and a significantly higher plasma level of CD8⁺ T cell count on POD 1-3 after LS(WMD=0.05, 95% CI:0.01 to 0.08, P=0.004). Although postoperatively short-term humoral immune function trends to be better after LS for CRC compared to OS, there is no sufficient evidence to support superior preservation of global immune function after acute reactive phase.

Early Relapse of Follicular Lymphoma After Rituximab Plus Cyclophosphamide, Doxorubicin, Vincristine, and Prednisone Defines Patients at High Risk for Death: An Analysis From the National LymphoCare Study

PubMed Central

Casulo, Carla; Byrtek, Michelle; Dawson, Keith L.; Zhou, Xiaolei; Farber, Charles M.; Flowers, Christopher R.; Hainsworth, John D.; Maurer, Matthew J.; Cerhan, James R.; Link, Brian K.; Zelenetz, Andrew D.; Friedberg, Jonathan W.

2015-01-01

Purpose Twenty percent of patients with follicular lymphoma (FL) experience progression of disease (POD) within 2 years of initial chemoimmunotherapy. We analyzed data from the National LymphoCare Study to identify whether prognostic FL factors are associated with early POD and whether patients with early POD are at high risk for death. Patients and Methods In total, 588 patients with stage 2 to 4 FL received first-line rituximab plus cyclophosphamide, doxorubicin, vincristine, and prednisone (R-CHOP). Two groups were defined: patients with early POD 2 years or less after diagnosis and those without POD within 2 years, the reference group. An independent validation set, 147 patients with FL who received first-line R-CHOP, was analyzed for reproducibility. Results Of 588 patients, 19% (n = 110) had early POD, 71% (n = 420) were in the reference group, 8% (n = 46) were lost to follow-up, and 2% (n = 12) died without POD less than 2 years after diagnosis. Five-year overall survival was lower in the early-POD group than in the reference group (50% v 90%). This trend was maintained after we adjusted for FL International Prognostic Index (hazard ratio, 6.44; 95% CI, 4.33 to 9.58). Results were similar for the validation set (FL International Prognostic Index–adjusted hazard ratio, 19.8). Conclusion In patients with FL who received first-line R-CHOP, POD within 2 years after diagnosis was associated with poor outcomes and should be further validated as a standard end point of chemoimmunotherapy trials of untreated FL. This high-risk FL population warrants further study in directed prospective clinical trials. PMID:26124482

Field-design optimization with triangular heliostat pods

NASA Astrophysics Data System (ADS)

Domínguez-Bravo, Carmen-Ana; Bode, Sebastian-James; Heiming, Gregor; Richter, Pascal; Carrizosa, Emilio; Fernández-Cara, Enrique; Frank, Martin; Gauché, Paul

2016-05-01

In this paper the optimization of a heliostat field with triangular heliostat pods is addressed. The use of structures which allow the combination of several heliostats into a common pod system aims to reduce the high costs associated with the heliostat field and therefore reduces the Levelized Cost of Electricity value. A pattern-based algorithm and two pattern-free algorithms are adapted to handle the field layout problem with triangular heliostat pods. Under the Helio100 project in South Africa, a new small-scale Solar Power Tower plant has been recently constructed. The Helio100 plant has 20 triangular pods (each with 6 heliostats) whose positions follow a linear pattern. The obtained field layouts after optimization are compared against the reference field Helio100.

Recent progress in the NDE of cast ship propulsion components

NASA Astrophysics Data System (ADS)

Spies, Martin; Rieder, Hans; Dillhöfer, Alexander; Rauhut, Markus; Taeubner, Kai; Kreier, Peter

2014-02-01

The failure of propulsion components of ships and ferries can lead to serious environmental and economic damage or even the loss of lives. For ultrasonic inspection of such large components we employ mechanized scanning and defect reconstruction using the Synthetic Aperture Focusing Technique (SAFT). We report on results obtained in view of the detection of defects with different inspection techniques. Also, we address the issue of Probability of Detection by reporting results obtained in POD and MAPOD-studies (Model-Assisted POD) using experimental and simulated data. Finally, we show recent results of surface and sub-surface inspection using optical and eddy current techniques.

Unsteady features of the flow on a bump in transonic environment

NASA Astrophysics Data System (ADS)

Budovsky, A. D.; Sidorenko, A. A.; Polivanov, P. A.; Vishnyakov, O. I.; Maslov, A. A.

2016-10-01

The study deals with experimental investigation of unsteady features of separated flow on a profiled bump in transonic environment. The experiments were conducted in T-325 wind tunnel of ITAM for the following flow conditions: P0 = 1 bar, T0 = 291 K. The base flow around the model was studied by schlieren visualization, steady and unsteady wall pressure measurements and PIV. The experimentally data obtained using PIV are analyzed by Proper Orthogonal Decomposition (POD) technique to investigate the underlying unsteady flow organization, as revealed by the POD eigenmodes. The data obtained show that flow pulsations revealed upstream and downstream of shock wave are correlated and interconnected.

Polyplanar optic display for cockpit application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veligdan, J.; Biscardi, C.; Brewster, C.

1998-04-01

The Polyplanar Optical Display (POD) is a high contrast display screen being developed for cockpit applications. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a long lifetime, (10,000 hour), 200 mW green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments,more » Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design and speckle reduction, the authors discuss the electronic interfacing to the DLP{trademark} chip, the opto-mechanical design and viewing angle characteristics.« less

Polyplanar optic display

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veligdan, J.; Biscardi, C.; Brewster, C.

1997-07-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 100 milliwatt green solid state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments, Inc.more » A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the electronic interfacing to the DLP{trademark} chip, the opto-mechanical design and viewing angle characteristics.« less

Polyplanar optic display for cockpit application

NASA Astrophysics Data System (ADS)

Veligdan, James T.; Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Freibott, William C.

1998-09-01

The Polyplanar Optical Display (POD) is a high contrast display screen being developed for cockpit applications. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a long lifetime, (10,000 hour), 200 mW green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLPTM) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design and speckle reduction, we discuss the electronic interfacing to the DLPTM chip, the opto-mechanical design and viewing angle characteristics.

Dynamic PROOF clusters with PoD: architecture and user experience

NASA Astrophysics Data System (ADS)

Manafov, Anar

2011-12-01

PROOF on Demand (PoD) is a tool-set, which sets up a PROOF cluster on any resource management system. PoD is a user oriented product with an easy to use GUI and a command-line interface. It is fully automated. No administrative privileges or special knowledge is required to use it. PoD utilizes a plug-in system, to use different job submission front-ends. The current PoD distribution is shipped with LSF, Torque (PBS), Grid Engine, Condor, gLite, and SSH plug-ins. The product is to be extended. We therefore plan to implement a plug-in for AliEn Grid as well. Recently developed algorithms made it possible to efficiently maintain two types of connections: packet-forwarding and native PROOF connections. This helps to properly handle most kinds of workers, with and without firewalls. PoD maintains the PROOF environment automatically and, for example, prevents resource misusage in case when workers idle for too long. As PoD matures as a product and provides more plug-ins, it's used as a standard for setting up dynamic PROOF clusters in many different institutions. The GSI Analysis Facility (GSIAF) is in production since 2007. The static PROOF cluster has been phased out end of 2009. GSIAF is now completely based on PoD. Users create private dynamic PROOF clusters on the general purpose batch farm. This provides an easier resource sharing between interactive local batch and Grid usage. The main user communities are FAIR and ALICE.

[Predictive value of procalcitonin in postoperative intra-abdominal infections after definitive operation of intestinal fistulae].

PubMed

Ren, Huajian; Wang, Gefei; Gu, Guosheng; Hu, Qiongyuan; Li, Guanwei; Hong, Zhiwu; Wu, Xiuwen; Ren, Jianan

2017-05-25

To investigate the predictive value of procalcitonin(PCT) in postoperative intra-abdominal infections (IAI) after definitive operation of intestinal fistulae(IF). With the exclusion of emergence operation, preoperative clinical infection, preoperative renal or hepatic dysfunction, and age less than 18 years, a total of 356 consecutive patients who underwent elective digestive tract reconstruction of intestinal fistulae from February 2012 to December 2015 at Intestinal Fistula Center of Jinling Hospital were prospectively enrolled in the study. All the patients were divided into IAI group (26 cases, 21 of anastomosis leakage and 5 of peritoneal abscess) and non-IAI group (330 cases) based on the existence of postoperative IAI. The non-IAI group was then divided into two subgroups of other infection (93 cases) and non-infection(237 cases) according to the presence of other infections. Plasma PCT level, serum CRP concentration and WBC count were assessed preoperatively and on postoperative days (PODs) 1, 3, 5, 7 by immunofluorescence, turbidimetry and automatic blood analyzer, respectively. The predictive value of each marker for IAI was calculated by receiver operating characteristic (ROC) curve. There was no significant difference in general clinical data between IAI and non-IAI group (all P>0.05). The proportions of multi-IF (53.8%, 14/26) and colectomy (61.5%, 16/26) in IAI group were higher than those of non-IAI group [20.0% (66/330), χ 2 =15.847, P=0.000 and 31.2%(103/330), χ 2 =9.961, P=0.002]. Differences of preoperative PCT, CRP and WBC levels among IAI, other infection and non-infection groups were not significant. These three markers all increased obviously and immediately after surgery. PCT and WBC values reached the peak point on POD 1, whereas CRP on POD 3. In IAI group, mean PCT values were (5.4±4.2) μg/L, (2.9±1.9) μg/L and (1.6±1.8) μg/L on POD 1, POD 3 and POD 5, respectively, which were higher than those of other infection group [(4.2±8.7) μg/L, (1.9±3.8) μg/L and (0.6±0.8) μg/L] and non-infection group [(2.7±5.8) μg/L, (1.1±1.7) μg/L and (0.5±0.7) μg/L, all P<0.05]. Mean CRP values in IAI group were 99.4 mg/L and 183.9 mg/L respectively on POD 1 and POD 3,and mean WBC values of IAI group on POD 1, POD 3 and POD 5 were 16.0×10 9 /L, 10.8×10 9 /L and 8.7×10 9 /L, respectively, which were all significantly higher than those in the other 2 groups (all P<0.05). No significant differences were obtained between other infection group and non-infection group in all these three markers (all P>0.05). ROC curve demonstrated that PCT had the biggest area under the curve (AUC) of 0.86 and 0.84 on POD 3 and POD 5, with the cut-off value of 0.98 μg/L and 0.83 μg/L, 92.0% sensitivity and 74.0% specificity, 91.0% sensitivity and 73.0% specificity, respectively. The highest AUC was 0.72 on POD 3 for CRP and 0.71 on POD 3 for WBC, with 80.0% sensitivity and 54.0% specificity, 56.0% sensitivity and 73.0% specificity, respectively. The value of procalcitonin above 0.98 μg/L on POD 3 and 0.83 μg/L on POD 5 can predict the occurrence of IAI after definitive operations of intestinal fistulae.

Early Subretinal Allograft Rejection Is Characterized by Innate Immune Activity.

PubMed

Kennelly, Kevin P; Holmes, Toby M; Wallace, Deborah M; O'Farrelly, Cliona; Keegan, David J

2017-06-09

Successful subretinal transplantation is limited by considerable early graft loss despite pharmacological suppression of adaptive immunity. We postulated that early innate immune activity is a dominant factor in determining graft survival and chose a nonimmunosuppressed mouse model of retinal pigment epithelial (RPE) cell transplantation to explore this. Expression of almost all measured cytokines by DH01 RPE cells increased significantly following graft preparation, and the neutrophil chemoattractant KC/GRO/CINC was most significantly increased. Subretinal allografts of DH01 cells (C57BL/10 origin) into healthy, nonimmunosuppressed C57BL/6 murine eyes were harvested and fixed at 1, 3, 7, and 28 days postoperatively and subsequently cryosectioned and stained. Graft cells were detected using SV40 large T antigen (SV40T) immunolabeling and apoptosis/necrosis by terminal deoxynucleotidyl transferase dUTP nick-end labeling (TUNEL). Sections were also immunolabeled for macrophage (CD11b and F4/80), neutrophil (Gr1 Ly-6G), and T-lymphocyte (CD3-ɛ) infiltration. Images captured with an Olympus FV1000 confocal microscope were analyzed using the Imaris software. The proportion of the subretinal bolus comprising graft cells (SV40T+) was significantly (p < 0.001) reduced between postoperative day (POD) 3 (90 ± 4%) and POD 7 (20 ± 7%). CD11b+, F4/80+, and Gr1 Ly-6G+ cells increased significantly (p < 0.05) from POD 1 and predominated over SV40T+ cells by POD 7. Colabeling confocal microscopic analysis demonstrated graft engulfment by neutrophils and macrophages at POD 7, and reconstruction of z-stacked confocal images confirmed SV40T inside Gr1 Ly-6G+ cells. Expression of CD3-ɛ was low and did not differ significantly between time points. By POD 28, no graft cells were detectable and few inflammatory cells remained. These studies reveal, for the first time, a critical role for innate immune mechanisms early in subretinal graft rejection. The future success of subretinal transplantation will require more emphasis on techniques to limit innate immune-mediated graft loss, rather than focusing exclusively on suppression of the adaptive immune response.

Inheritance of quantitative traits in crosses between two Pisum sativum subspecies with particular reference to their breeding value.

PubMed

Kosev, V; Pachev, I; Angelova, S; Mikić, A

2012-01-01

The experimental study was conducted during the period of 2008-2010 at the experimental field of the Institute of Forage Crops in Pleven. The hybridization scheme included direct and back crosses covering four varieties of forage pea (Pisum sativum L.), namely two spring ones, Usatii 90 and Kamerton from Ukraine, and a winter one from Bulgaria, Pleven 10. There was analyzed the inheritance of quantitative traits such as plant height, height to first pod, pod number per plant, seed number per plant, seed number per pod, seed weight per plant and number of fertile nodes per plant of parental components (P1 and P2) and both first (F1) and second (F2) hybrid generations. The cross Usatii 90 x Pleven 10 showed the highest real heterosis effect for plant height (8.26%), pods per plant (158.79%), seeds per plant (272.16%), seeds per pod (42.09%), seed weight per plant (432.43%) and number of fertile nodes per plant (117.14%). The cross Pleven 10 x Usatii 90 had the highest real heterosis effect height to first pod (11.06%). In F2 plants, the strongest depression for plant height (5.88%), seeds per plant (57.88%), seeds per pod (55.93%) and seed weight per plant (55.99%) was in the cross Usatii 90 x Pleven 10, for height to first pod (1.47%) in the cross Kamerton x Pleven 10 and for number of fertile nodes per plant (15.91%) in the cross Pleven 10 x Usatii 90. The highest positive degree of transgression for number of fertile nodes per plant (165.64%) and seed weight per plant (162.10%) was in the cross Pleven 10 x Kamerton and for pod number per plant (102.54%) and seeds per plant (99.13%) in Kamerton x Pleven 10. The stability of the characters was determined. Low variability in F1 and F2 was found in plant height (3.97-6.85%). Variability of number seeds per plant in F1 was highest (11.86-33.23%). For all other traits, the variability varied from average to high. A lower narrow-sense heritability coefficient was observed for plant height, height to first pod, pods per plant, seeds per plant and seed weight per plant (from 0.001 to 0.230). In few cases, such as in fertile nodes per plant (0.39 and 0.81) and seeds per pod (0.44), the coefficients ofbroad-sense heritability were higher.

Hierarchical Bass model

NASA Astrophysics Data System (ADS)

Tashiro, Tohru

2014-03-01

We propose a new model about diffusion of a product which includes a memory of how many adopters or advertisements a non-adopter met, where (non-)adopters mean people (not) possessing the product. This effect is lacking in the Bass model. As an application, we utilize the model to fit the iPod sales data, and so the better agreement is obtained than the Bass model.

Predictors of dermal exposures to polycyclic aromatic compounds among hot-mix asphalt paving workers.

PubMed

Cavallari, Jennifer M; Osborn, Linda V; Snawder, John E; Kriech, Anthony J; Olsen, Larry D; Herrick, Robert F; McClean, Michael D

2012-03-01

The primary objective of this study was to identify the source and work practices that affect dermal exposure to polycyclic aromatic compounds (PACs) among hot-mix asphalt (HMA) paving workers. Four workers were recruited from each of three asphalt paving crews (12 workers) and were monitored for three consecutive days over 4 weeks for a total of 12 sampling days per worker (144 worker days). Two sampling weeks were conducted under standard conditions for dermal exposures. The third week included the substitution of biodiesel for diesel oil used to clean tools and equipment and the fourth week included dermal protection through the use of gloves, hat and neck cloth, clean pants, and long-sleeved shirts. Dermal exposure to PACs was quantified using two methods: a passive organic dermal (POD) sampler specifically developed for this study and a sunflower oil hand wash technique. Linear mixed-effects models were used to evaluate predictors of PAC exposures. Dermal exposures measured under all conditions via POD and hand wash were low with most samples for each analyte being below the limit of the detection with the exception of phenanthrene and pyrene. The geometric mean (GM) concentrations of phenanthrene were 0.69 ng cm(-2) on the polypropylene layer of the POD sampler and 1.37 ng cm(-2) in the hand wash sample. The GM concentrations of pyrene were 0.30 ng cm(-2) on the polypropylene layer of the POD sampler and 0.29 ng cm(-2) in the hand wash sample. Both the biodiesel substitution and dermal protection scenarios were effective in reducing dermal exposures. Based on the results of multivariate linear mixed-effects models, increasing frequency of glove use was associated with significant (P < 0.0001) reductions for hand wash and POD phenanthrene and pyrene concentrations; percent reductions ranged from 40 to 90%. Similar reductions in hand wash concentrations of phenanthrene (P = 0.01) and pyrene (P = 0.003) were observed when biodiesel was substituted for diesel oil as a cleaning agent, although reductions were not significant for the POD sampler data. Although task was not a predictor of dermal exposure, job site characteristics such as HMA application temperature, asphalt grade, and asphalt application rate (tons per hour) were found to significantly affect exposure. Predictive models suggest that the combined effect of substituting biodiesel for diesel oil as a cleaning agent, frequent glove use, and reducing the HMA application temperature from 149°C (300°F) to 127°C (260°F) may reduce dermal exposures by 76-86%, varying by analyte and assessment method. Promising strategies for reducing dermal exposure to PACs among asphalt paving workers include requiring the use of dermal coverage (e.g. wearing gloves and/or long sleeves), substituting biodiesel for diesel oil as a cleaning agent, and decreasing the HMA application temperature.

POD and PPP with multi-frequency processing

NASA Astrophysics Data System (ADS)

Roldán, Pedro; Navarro, Pedro; Rodríguez, Daniel; Rodríguez, Irma

2017-04-01

Precise Orbit Determination (POD) and Precise Point Positioning (PPP) are methods for estimating the orbits and clocks of GNSS satellites and the precise positions and clocks of user receivers. These methods are traditionally based on processing the ionosphere-free combination. With this combination, the delay introduced in the signal when passing through the ionosphere is removed, taking advantage of the dependency of this delay with the square of the frequency. It is also possible to process the individual frequencies, but in this case it is needed to properly model the ionospheric delay. This modelling is usually very challenging, as the electron content in the ionosphere experiences important temporal and spatial variations. These two options define the two main kinds of processing: the dual-frequency ionosphere-free processing, typically used in the POD and in certain applications of PPP, and the single-frequency processing with estimation or modelisation of the ionosphere, mostly used in the PPP processing. In magicGNSS, a software tool developed by GMV for POD and PPP, a hybrid approach has been implemented. This approach combines observations from any number of individual frequencies and any number of ionosphere-free combinations of these frequencies. In such a way, the observations of ionosphere-free combination allow a better estimation of positions and orbits, while the inclusion of observations from individual frequencies allows to estimate the ionospheric delay and to reduce the noise of the solution. It is also possible to include other kind of combinations, such as geometry-free combination, instead of processing individual frequencies. The joint processing of all the frequencies for all the constellations requires both the estimation or modelisation of ionospheric delay and the estimation of inter-frequency biases. The ionospheric delay can be estimated from the single-frequency or dual-frequency geometry-free observations, but it is also possible to use a-priori information based on ionospheric models, on external estimations and on the expected behavior of the ionosphere. The inter-frequency biases appear because the delay of the signal inside the transmitter and the receiver strongly depends on its frequency. However, it is possible to include constraints in the estimator regarding these delays, assuming small variations over time. By using different types of combinations, all the available information from GNSS systems can be included in the processing. This is especially interesting for the case of Galileo satellites, which transmit in several frequencies, and the GPS IIF satellites, which transmit in L5 in addition to the traditional L1 and L2. Several experiments have been performed, to assess the improvement on performance of POD and PPP when using all the constellations and all the available frequencies for each constellation. This paper describes the new approach of multi-frequency processing, including the estimation of biases and ionospheric delays impacting on GNSS observations, and presents the results of the performed experimentation activities to assess the benefits in POD and PPP algorithms.

The mitogenome of the brown pod-sucking bug Clavigralla tomentosicollis (Hemiptera: Coreidae)

USDA-ARS?s Scientific Manuscript database

Brown pod-sucking bug, Clavigralla tomentosicollis Stäl (Hemiptera: Coreidae), causes significant damage to cultivated cowpea, Vigna unguiculata Walp, a staple crop in sub-Saharan Africa. C. tomentosicollis pierce and suck sap from cowpea pods, resulting in reduced grain yield and quality. The compl...

Chile stand management for mechanical green chile harvest

USDA-ARS?s Scientific Manuscript database

Currently the red chile crop is mechanically harvested. Because the pods will be dehydrated before consumption, breakage and bruising of red pods is not a concern. Green chile, however, is currently hand harvested because of the fragile nature of the fruit and the need to avoid pod damage. Hand h...

Boeing 747 aircraft with large external pod for transporting outsize cargo

NASA Technical Reports Server (NTRS)

Price, J. E.; Quartero, C. B.; Smith, P. M.; Washburn, G. F.

1979-01-01

The effect on structural arrangement, system weight, and range performance of the cargo pod payload carrying capability was determined to include either the bridge launcher or a spacelab module on a Boeing 747 aircraft. Modifications to the carrier aircraft and the installation time required to attach the external pod to the 747 were minimized. Results indicate that the increase in pod size was minimal, and that the basic 747 structure was adequate to safely absorb the load induced by ground or air operation while transporting either payload.

Physiological traits of endornavirus-infected and endornavirus-free common bean (Phaseolus vulgaris) cv Black Turtle Soup.

PubMed

Khankhum, S; Valverde, R A

2018-04-01

This study evaluated the physiological traits of eight lines of common bean (Phaseolus vulgaris) cv. Black Turtle Soup, four of which were double-infected with Phaseolus vulgaris endornavirus 1 and Phaseolus vulgaris endornavirus 2, and four of which were endornavirus-free. Plants from all eight lines were morphologically similar and did not show statistically significant differences in plant height, wet weight, number of days to flowering and pod formation, pods per plant, pod thickness, seed size, number of seeds per pod, and anthocyanin content. However, the endornavirus-infected lines had faster seed germination, longer radicle, lower chlorophyll content, higher carotene content, longer pods, and higher weight of 100 seeds, all of which were statistically significant. The endornaviruses were not associated with visible pathogenic effects.

Polarity-defective mutants of Aspergillus nidulans.

PubMed

Osherov, N; Mathew, J; May, G S

2000-12-01

We have identified two polarity-defective (pod) mutants in Aspergillus nidulans from a collection of heat-sensitive lethal mutants. At restrictive temperature, these mutants are capable of nuclear division but are unable to establish polar hyphal growth. We cloned the two pod genes by complementation of their heat-sensitive lethal phenotypes. The libraries used to clone the pod genes are under the control of the bidirectional niaD and niiA promoters. Complementation of the pod mutants is dependent on growth on inducing medium. We show that rescue of the heat-sensitive phenotype on inducing media is independent of the orientation of the gene relative to the niaD or niiA promoters, demonstrating that the intergenic region between the niaD and the niiA genes functions as an orientation-independent enhancer and repressor that is capable of functioning over long distances. The products of the podG and the podH genes were identified as homologues of the alpha subunit of yeast mitochondrial phenylalanyl--tRNA synthetase and transcription factor IIF interacting component of the CTD phosphatase. Neither of these gene products would have been predicted to produce a pod mutant phenotype based on studies of cellular polarity mutants in other organisms. The implications of these results are discussed. Copyright 2000 Academic Press.

Use of plant residues for improving soil fertility, pod nutrients, root growth and pod weight of okra (Abelmoschus esculentum L).

PubMed

Moyin-Jesu, Emmanuel Ibukunoluwa

2007-08-01

The effect of wood ash, sawdust, ground cocoa husk, spent grain and rice bran upon root development, ash content, pod yield and nutrient status and soil fertility for okra (Abelmoschus esculentum L NHAe 47 variety) was studied. The five organic fertilizer treatments were compared to chemical fertilizer (400kg/ha/crop NPK 15-15-15) and unfertilized controls in four field experiments replicated four times in a randomized complete block design. The results showed that the application of 6tha(-1) of plant residues increased (P<0.05) the soil N, P, K, Ca, Mg, pH, and SOM; pod N, P, K, Ca, Mg and ash; root length; and pod yield of okra in all four experiments relative to the control treatment. For instance, spent grain treatment increased the okra pod yield by 99%, 33%, 50%, 49%, 65% and 67% compared to control, NPK, wood ash, cocoa husk, rice bran and sawdust treatments respectively. In the stepwise regression, out of the total R(2) value of 0.83 for the soil nutrients to the pod yield of okra; soil N accounted for 50% of the soil fertility improvement and yield of okra. Spent grain, wood ash and cocoa husk were the most effective in improving okra pod weight, pod nutrients, ash content, root length and soil fertility whereas the rice bran and sawdust were the least effective. This was because the spent grain, wood ash and cocoa husk had lower C/N ratio and higher nutrient composition than rice bran and sawdust, thus, the former enhanced an increase in pod nutrients, composition for better human dietary intake, increased the root length, pod weight of okra and improved soil fertility and plant nutrition crop. The significance of the increases in okra mineral nutrition concentration by plant residues is that consumers will consume more of these minerals in their meals and monetarily spend less for purchasing vitamins and mineral supplement drugs to meet health requirements. In addition, the increase in plant nutrition and soil fertility would help to reduce the high cost of buying synthetic inorganic fertilizers and maintain the long term productivity of soils for sustainable cultivation of okra.

Characterization of Flow Dynamics and Reduced-Order Description of Experimental Two-Phase Pipe Flow

NASA Astrophysics Data System (ADS)

Viggiano, Bianca; SkjæRaasen, Olaf; Tutkun, Murat; Cal, Raul Bayoan

2017-11-01

Multiphase pipe flow is investigated using proper orthogonal decomposition for tomographic X-ray data, where holdup, cross sectional phase distributions and phase interface characteristics are obtained. Instantaneous phase fractions of dispersed flow and slug flow are analyzed and a reduced order dynamical description is generated. The dispersed flow displays coherent structures in the first few modes near the horizontal center of the pipe, representing the liquid-liquid interface location while the slug flow case shows coherent structures that correspond to the cyclical formation and breakup of the slug in the first 10 modes. The reconstruction of the fields indicate that main features are observed in the low order dynamical descriptions utilizing less than 1 % of the full order model. POD temporal coefficients a1, a2 and a3 show interdependence for the slug flow case. The coefficients also describe the phase fraction holdup as a function of time for both dispersed and slug flow. These flows are highly applicable to petroleum transport pipelines, hydroelectric power and heat exchanger tubes to name a few. The mathematical representations obtained via proper orthogonal decomposition will deepen the understanding of fundamental multiphase flow characteristics.

Experimental Evaluation of the Scale Model Method to Simulate Lunar Vehicle Dynamics

NASA Technical Reports Server (NTRS)

Johnson, Kyle; Asnani, Vivake; Polack, Jeff; Plant, Mark

2016-01-01

As compared to driving on Earth, the presence of lower gravity and uneven terrain on planetary bodies makes high speed driving difficult. In order to maintain ground contact and control vehicles need to be designed with special attention to dynamic response. The challenge of maintaining control on the Moon was evident during high speed operations of the Lunar Roving Vehicle (LRV) on Apollo 16, as at one point all four tires were off the ground; this event has been referred to as the Lunar Grand Prix. Ultimately, computer simulation should be used to examine these phenomena during the vehicle design process; however, experimental techniques are required for the validation and elucidation of key issues. The objectives of this study were to evaluate the methodology for developing a scale model of a lunar vehicle using similitude relationships and to test how vehicle configuration, six or eight wheel pods, and local tire compliance, soft or stiff, affect the vehicles dynamic performance. A wheel pod consists of a drive and steering transmission and wheel. The Lunar Electric Rover (LER), a human driven vehicle with a pressurized cabin, was selected as an example for which a scale model was built. The scaled vehicle was driven over an obstacle and the dynamic response was observed and then scaled to represent the full-size vehicle in lunar gravity. Loss of ground contact, in terms of vehicle travel distance with tires off the ground, was examined. As expected, local tire compliance allowed ground contact to be maintained over a greater distance. However, switching from a six-tire configuration to an eight-tire configuration with reduced suspension stiffness had a negative effect on ground contact. It is hypothesized that this was due to the increased number or frequency of impacts. The development and testing of this scale model provided practical lessons for future low-gravity vehicle development.

Cowpea fresh pods - a new legume for the market: assessment of their quality and dietary characteristics of 37 cowpea accessions grown in southern Europe.

PubMed

Karapanos, Ioannis; Papandreou, Anastasia; Skouloudi, Marianna; Makrogianni, Despoina; Fernández, Juan A; Rosa, Eduardo; Ntatsi, Georgia; Bebeli, Penelope J; Savvas, Dimitrios

2017-10-01

Cowpea is traditionally cultivated in some regions of southern Europe for its dried seeds; however, there is a scarcity of information on the quality and dietary characteristics of fresh pods, which are occasionally used in folk diets. This paper aims at covering this gap in knowledge, thereby contributing to the dissemination of fresh cowpea pods as a novel product for the market. The quality and dietary characteristics of pods from 37 accessions (Vigna unguiculata ssp. unguiculata and ssp. sesquipedalis) grown in southern Europe were assessed in an attempt to provide information on pod quality and nutritional properties and to identify relationships between quality traits and accession origin. Pods from the sesquipedalis accessions were heavier and larger, and reached commercial maturity 2 days later, than those from the unguiculata accessions. There were also large differences in the quality and dietary characteristics of the accessions. The pods of most accessions were rich in proteins, chlorophylls, carotenoids and phenolics, and showed high antioxidant activity and low concentrations of nitrates and raffinose-family oligosaccharides. Cluster analysis based on quality, dietary or antinutritional traits did not reveal any apparent grouping among the accessions. All the quality characteristics were independent of accession origin and subspecies. Most of the accessions produced fresh pods of good quality and high dietary value, suitable for introduction in the market and/or for use as valuable genetic material for the development of new improved varieties. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Nutrient Digestibility and Metabolizable Energy Content of Mucuna pruriens Whole Pods Fed to Growing Pelibuey Lambs.

PubMed

Loyra-Tzab, Enrique; Sarmiento-Franco, Luis Armando; Sandoval-Castro, Carlos Alfredo; Santos-Ricalde, Ronald Herve

2013-07-01

The nutrient digestibility, nitrogen balance and in vivo metabolizable energy supply of Mucuna pruriens whole pods fed to growing Pelibuey lambs was investigated. Eight Pelibuey sheep housed in metabolic crates were fed increasing levels of Mucuna pruriens pods: 0 (control), 100 (Mucuna100), 200 (Mucuna200) and 300 (Mucuna300) g/kg dry matter. A quadratic (p<0.002) effect was observed for dry matter (DM), neutral detergent fibre (aNDF), nitrogen (N) and gross energy (GE) intakes with higher intakes in the Mucuna100 and Mucuna200 treatments. Increasing M. pruriens in the diets had no effect (p>0.05) on DM and GE apparent digestibility (p<0.05). A linear reduction in N digestibility and N retention was observed with increasing mucuna pod level. This effect was accompanied by a quadratic effect (p<0.05) on fecal-N and N-balance which were higher in the Mucuna100 and Mucuna200 treatments. Urine-N excretion, GE retention and dietary estimated nutrient supply (metabolizable protein and metabolizable energy) were not affected (p>0.05). DM, N and GE apparent digestibility coefficient of M. pruriens whole pods obtained through multiple regression equations were 0.692, 0.457, 0.654 respectively. In vivo DE and ME content of mucuna whole pod were estimated in 11.0 and 9.7 MJ/kg DM. It was concluded that whole pods from M. pruriens did not affect nutrient utilization when included in an mixed diet up to 200 g/kg DM. This is the first in vivo estimation of mucuna whole pod ME value for ruminants.

Influence of a Shorter Duration of Post-Operative Antibiotic Prophylaxis on Infectious Complications in Patients Undergoing Elective Liver Resection.

PubMed

Sakoda, Masahiko; Iino, Satoshi; Mataki, Yuko; Kawasaki, Yota; Kurahara, Hiroshi; Maemura, Kosei; Ueno, Shinichi; Natsugoe, Shoji

Antibiotic prophylaxis has been recommended to reduce post-operative infectious complications. Discontinuation of post-operative antibiotic administration within 24 hours of operation is currently recommended. Many surgeons, however, conventionally tend to extend the duration of prophylactic antibiotic use. In this study, we performed a retrospective analysis to assess the efficacy of extended post-operative antibiotic use in patients who underwent elective liver resection. A total of 208 consecutive patients who underwent liver resection without biliary reconstruction were investigated. Patients were divided into two groups according to the duration of post-operative antibiotic use: Only once after the operation (the post-operative day [POD] 0 group) and until three days after the operation (the POD 3 group). Post-operative complications in the two groups were analyzed and compared. Incisional surgical site infections (SSIs) were observed in 5% of the POD 0 group and 3% of the POD 3 group (p = 0.517). Organ/space SSIs were observed in 2% of the POD 0 group and 3% of the POD 3 group (p = 0.694). Overall infectious complications including SSIs and remote site infections were observed in 12% of the POD 0 group and 11% of the POD 3 group. Multi-variable analyses revealed that the short-term post-operative antibiotic regimen did not confer additional risk for infectious complications. In elective liver resection, the administration of prophylactic antibiotics on the operative day alone appears to be sufficient, because no additional benefit in the incidence of post-operative infectious complications was conferred on patients given antibiotic agents for three days.

Pediatric exposure to laundry detergent pods.

PubMed

Valdez, Amanda L; Casavant, Marcel J; Spiller, Henry A; Chounthirath, Thiphalak; Xiang, Huiyun; Smith, Gary A

2014-12-01

Laundry detergent pods are a new product in the US marketplace. This study investigates the epidemiologic characteristics and outcomes of laundry detergent pod exposures among young children in the United States. Using data from the National Poison Data System, exposures to laundry detergent pods among children younger than 6 years of age during 2012-2013 were investigated. There were 17 230 children younger than 6 years exposed to laundry detergent pods in 2012-2013. From March 2012 to April 2013, the monthly number of exposures increased by 645.3%, followed by a 25.1% decrease from April to December 2013. Children younger than 3 years accounted for 73.5% of cases. The major route of exposure was ingestion, accounting for 79.7% of cases. Among exposed children, 4.4% were hospitalized and 7.5% experienced a moderate or major medical outcome. A spectrum of clinical effects from minor to serious was seen with ingestion and ocular exposures. There were 102 patients (0.6%) exposed to a detergent pod via ingestion, aspiration, or a combination of routes, including ingestion, who required tracheal intubation. There was 1 confirmed death. Laundry detergent pods pose a serious poisoning risk to young children. This nationwide study underscores the need for increased efforts to prevent exposure of young children to these products, which may include improvements in product packaging and labeling, development of a voluntary product safety standard, and public education. Product constituent reformulation is another potential strategy to mitigate the severity of clinical effects of laundry detergent pod exposure. Copyright © 2014 by the American Academy of Pediatrics.

Fine phenotyping of pod and seed traits in Arachis germplasm accessions using digital image analysis

USDA-ARS?s Scientific Manuscript database

Reliable and objective phenotyping of peanut pod and seed traits is important for cultivar selection and genetic mapping of yield components. To develop useful and efficient methods to quantitatively define peanut pod and seed traits, a group of peanut germplasm with high levels of phenotypic varia...

Variation among edible podded snap bean accessions for pod and seed sugar content

USDA-ARS?s Scientific Manuscript database

Sugar content of immature snap bean (Phaseolus vulgaris) pods and the effects of sugars on other flavor compounds are important to consumers and affect their food and vegetable choices. The objective of this study was to identify variation within Phaseolus vulgaris in relation to sugars that affect ...

Toward The identification Of candidate genes involved in black pod disease resistance in Theobroma cacao L.

USDA-ARS?s Scientific Manuscript database

Increasing yield, quality and disease resistance are important objectives for cacao breeding programs. Some of the diseases, such as black pod rot (Phytophtora spp), frosty pod (Moniliophthora roreri) and witches’ broom (M. perniciosa), produce significant losses in all or in some of the various pro...

Listening Habits of iPod Users

ERIC Educational Resources Information Center

Epstein, Michael; Marozeau, Jeremy; Cleveland, Sandra

2010-01-01

Purpose: To estimate real-environment iPod listening levels for listeners in 4 environments to gain insight into whether average listeners receive dosages exceeding occupational noise exposure guidelines as a result of their listening habits. Method: The earbud outputs of iPods were connected directly into the inputs of a digital recorder to make…

MRI Markers of Neurodegenerative and Neurovascular Changes in Relation to Postoperative Delirium and Postoperative Cognitive Decline.

PubMed

Kant, Ilse M J; de Bresser, Jeroen; van Montfort, Simone J T; Slooter, Arjen J C; Hendrikse, Jeroen

2017-10-01

Postoperative delirium (POD) and postoperative cognitive decline (POCD) are common in elderly patients. The aim of the present review was to explore the association of neurodegenerative and neurovascular changes with the occurrence of POD and POCD. Fifteen MRI studies were identified by combining multiple search terms for POD, POCD, and brain imaging. These studies described a total of 1,422 patients and were all observational in design. Neurodegenerative changes (global and regional brain volumes) did not show a consistent association with the occurrence of POD (four studies) or POCD (two studies). In contrast, neurovascular changes (white matter hyperintensities and cerebral infarcts) were more consistently associated with the occurrence of POD (seven studies) and POCD (five studies). In conclusion, neurovascular changes appear to be consistently associated with the occurrence of POD and POCD, and may identify patients at increased risk of these conditions. Larger prospective studies are needed to study the consistency of these findings and to unravel the underlying pathophysiological mechanisms. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Process design and economic analysis of a hypothetical bioethanol production plant using carob pod as feedstock.

PubMed

Sánchez-Segado, S; Lozano, L J; de Los Ríos, A P; Hernández-Fernández, F J; Godínez, C; Juan, D

2012-01-01

A process for the production of ethanol from carob (Ceratonia siliqua) pods was designed and an economic analysis was carried out for a hypothetical plant. The plant was assumed to perform an aqueous extraction of sugars from the pods followed by fermentation and distillation to produce ethanol. The total fixed capital investment for a base case process with a capacity to transform 68,000 t/year carob pod was calculated as 39.61 millon euros (€) with a minimum bioethanol production cost of 0.51 €/L and an internal rate of return of 7%. The plant was found to be profitable at carob pod prices lower than 0.188 €/kg. An increase in the transformation capacity of the plant from 33,880 to 135,450 t/year was calculated to result in an increase in the internal rate of return from 5.50% to 13.61%. The obtained results show that carob pod is a promising alternative source for bioethanol production. Copyright © 2011 Elsevier Ltd. All rights reserved.

PIV measurements of a jet impinging on an opened rotor-stator system at low gap spacing

NASA Astrophysics Data System (ADS)

Nguyen, Thien; Pellé}, Julien; Harmand, Souad

2011-11-01

The current work experimentally investigates the flow characteristics of an air jet impinging to an opened rotor-stator configuration at a low nondimensional spacing G = 0 . 02 and very low aspect ratio e / D = 0 . 25 . The rotational Reynolds numbers varied from 0 . 33 ×105 to 5 . 32 ×105 while the jet Reynolds numbers ranged from 17 . 2 ×103 to 43 ×103 . PIV measurements were performed at three axial planes for the entire disk diameter. The obtained PIV results agreed with those obtained by LDA measurements and numerical simulation reported in Poncet et al. 2005 (Physics of Fluids 17, 075110). A recirculation flow region, which centered at the impinging point and possessed high turbulent intensities, was observed. The mean flow and turbulent intensities were evaluated with the local heat transfer coefficients measured by Pellé and Harmand 2009 (Applied Thermal Engineering 29: 1532-1543). It is shown that the local peaks and the gradually rising of the radial heat transfer coefficients Nu are due to the secondary peaks and the increases near the outer radius of the turbulent intensity distributions respectively. POD analysis was applied to the cases of the impinging jet with and without rotation. It is shown that the first POD mode captured nearly 60 % total kinetic energy and the low-order POD modes revealed a spiral structure in the jet-dominated region.

Targeted energy transfer in laminar vortex-induced vibration of a sprung cylinder with a nonlinear dissipative rotator

NASA Astrophysics Data System (ADS)

Blanchard, Antoine; Bergman, Lawrence A.; Vakakis, Alexander F.

2017-07-01

We computationally investigate the dynamics of a linearly-sprung circular cylinder immersed in an incompressible flow and undergoing transverse vortex-induced vibration (VIV), to which is attached a rotational nonlinear energy sink (NES) consisting of a mass that freely rotates at constant radius about the cylinder axis, and whose motion is restrained by a rotational linear viscous damper. The inertial coupling between the rotational motion of the attached mass and the rectilinear motion of the cylinder is ;essentially nonlinear;, which, in conjunction with dissipation, allows for one-way, nearly irreversible targeted energy transfer (TET) from the oscillating cylinder to the nonlinear dissipative attachment. At the intermediate Reynolds number Re = 100, the NES-equipped sprung cylinder undergoes repetitive cycles of slowly decaying oscillations punctuated by intervals of chaotic instabilities. During the slowly decaying portion of each cycle, the dynamics of the cylinder is regular and, for large enough values of the ratio ε of the NES mass to the total mass (i.e., NES mass plus cylinder mass), can lead to significant vortex street elongation with partial stabilization of the wake. As ε approaches zero, no such vortex elongation is observed and the wake patterns appear similar to that for a sprung cylinder with no NES. We apply proper orthogonal decomposition (POD) to the velocity flow field during a slowly decaying portion of the solution and show that, in situations where vortex elongation occurs, the NES, though not in direct contact with the surrounding fluid, has a drastic effect on the underlying flow structures, imparting significant and continuous passive redistribution of energy among POD modes. We construct a POD-based reduced-order model for the lift coefficient to characterize energy transactions between the fluid and the cylinder throughout the slowly decaying cycle. We introduce a quantitative signed measure of the work done by the fluid on the cylinder over one quasi-period of the slowly decaying response and find that vortex elongation is associated with a sign change of that measure, indicating that a reversal of the direction of energy transfer, with the cylinder ;leaking energy back; to the flow, is responsible for partial stabilization and elongation of the wake. We interpret these findings in terms of the spatial structure and energy distribution of the POD modes, and relate them to the mechanism of transient resonance capture into a slow invariant manifold of the fluid-structure interaction dynamics.

RNAi-mediated down-regulation of SHATTERPROOF gene in transgenic oilseed rape.

PubMed

Kord, Hadis; Shakib, Ali Mohammad; Daneshvar, Mohammad Hossein; Azadi, Pejman; Bayat, Vahid; Mashayekhi, Mohsen; Zarea, Mahboobeh; Seifi, Alireza; Ahmad-Raji, Mana

2015-06-01

Oilseed rape is one of the important oil plants. Pod shattering is one of the problems in oilseed rape production especially in regions with dry conditions. One of the important genes in Brassica pod opening is SHATTERPROOF1 (SHP1). Down-regulation of BnSHP1 expression by RNAi can increase resistance to pod shattering. A 470 bp of the BnSHP1 cDNA sequence constructed in an RNAi-silencing vector was transferred to oilseed rape cv. SLM046. Molecular analysis of T2 transgenic plants by RT-PCR and Real-time PCR showed that expression of the BnSHP alleles was highly decreased in comparison with control plants. Morphologically, transgenic plants were normal and produced seeds at greenhouse conditions. At ripening, stage pods failed to shatter, and a finger pressure was needed for pod opening.

Rasch analysis of the Trypophobia Questionnaire.

PubMed

Imaizumi, Shu; Tanno, Yoshihiko

2018-02-14

This study aimed to assess Rasch-based psychometric properties of the Trypophobia Questionnaire measuring proneness to trypophobia, which refers to disgust and unpleasantness induced by the observation of clusters of objects (e.g., lotus seed pods). Rasch analysis was performed on data from 582 healthy Japanese adults. The results suggested that Trypophobia Questionnaire has a unidimensional structure with ordered response categories and sufficient person and item reliabilities, and that it does not have differential item functioning across sexes and age groups, whereas the targeting of the scale leaves room for improvements. When items that did not fit the Rasch model were removed, the shortened version showed slightly improved psychometric properties. However, results were not conclusive in determining whether the full or shortened version is better for practical use. Further assessment and validation are needed.

Localized Glaucomatous Change Detection within the Proper Orthogonal Decomposition Framework

PubMed Central

Balasubramanian, Madhusudhanan; Kriegman, David J.; Bowd, Christopher; Holst, Michael; Weinreb, Robert N.; Sample, Pamela A.; Zangwill, Linda M.

2012-01-01

Purpose. To detect localized glaucomatous structural changes using proper orthogonal decomposition (POD) framework with false-positive control that minimizes confirmatory follow-ups, and to compare the results to topographic change analysis (TCA). Methods. We included 167 participants (246 eyes) with ≥4 Heidelberg Retina Tomograph (HRT)-II exams from the Diagnostic Innovations in Glaucoma Study; 36 eyes progressed by stereo-photographs or visual fields. All other patient eyes (n = 210) were non-progressing. Specificities were evaluated using 21 normal eyes. Significance of change at each HRT superpixel between each follow-up and its nearest baseline (obtained using POD) was estimated using mixed-effects ANOVA. Locations with significant reduction in retinal height (red pixels) were determined using Bonferroni, Lehmann-Romano k-family-wise error rate (k-FWER), and Benjamini-Hochberg false discovery rate (FDR) type I error control procedures. Observed positive rate (OPR) in each follow-up was calculated as a ratio of number of red pixels within disk to disk size. Progression by POD was defined as one or more follow-ups with OPR greater than the anticipated false-positive rate. TCA was evaluated using the recently proposed liberal, moderate, and conservative progression criteria. Results. Sensitivity in progressors, specificity in normals, and specificity in non-progressors, respectively, were POD-Bonferroni = 100%, 0%, and 0%; POD k-FWER = 78%, 86%, and 43%; POD-FDR = 78%, 86%, and 43%; POD k-FWER with retinal height change ≥50 μm = 61%, 95%, and 60%; TCA-liberal = 86%, 62%, and 21%; TCA-moderate = 53%, 100%, and 70%; and TCA-conservative = 17%, 100%, and 84%. Conclusions. With a stronger control of type I errors, k-FWER in POD framework minimized confirmatory follow-ups while providing diagnostic accuracy comparable to TCA. Thus, POD with k-FWER shows promise to reduce the number of confirmatory follow-ups required for clinical care and studies evaluating new glaucoma treatments. (ClinicalTrials.gov number, NCT00221897.) PMID:22491406

The Effect of Adductor Canal Block on Knee Extensor Muscle Strength 6 Weeks After Total Knee Arthroplasty: A Randomized, Controlled Trial.

PubMed

Rousseau-Saine, Nicolas; Williams, Stephan R; Girard, François; Hébert, Luc J; Robin, Florian; Duchesne, Luc; Lavoie, Frédéric; Ruel, Monique

2018-03-01

Total knee arthroplasty (TKA) reduces knee extensor muscle strength (KES) in the operated limb for several months after the surgery. Immediately after TKA, compared to either inguinal femoral nerve block or placebo, adductor canal block (ACB) better preserves KES. Whether this short-term increase in KES is maintained several weeks after surgery remains unknown. We hypothesized that 48 hours of continuous ACB immediately after TKA would improve KES 6 weeks after TKA, compared to placebo. Patients scheduled for primary unilateral TKA were randomized to receive either a continuous ACB (group ACB) or a sham block (group SHAM) for 48 hours after surgery. Primary outcome was the difference in maximal KES 6 weeks postoperatively, measured with a dynamometer during maximum voluntary isometric contraction. Secondary outcomes included postoperative day 1 (POD1) and day 2 (POD2) KES, pain scores at rest and peak effort, and opioid consumption; variation at 6 weeks of Knee Osteoarthritis Outcome Score, patient satisfaction, and length of hospital stay. Sixty-three subjects were randomized and 58 completed the study. Patients in group ACB had less pain at rest during POD1 and during peak effort on POD1 and POD2, consumed less opioids on POD1 and POD2, and had higher median KES on POD1. There was no significant difference between groups for median KES on POD2, variation of Knee Osteoarthritis Outcome Score, patient satisfaction, and length of stay. There was no difference between groups in median KES 6 weeks after surgery (52 Nm [31-89 Nm] for group ACB vs 47 Nm [30-78 Nm] for group SHAM, P= .147). Continuous ACB provides better analgesia and KES for 24-48 hours after surgery, but does not affect KES 6 weeks after TKA. Further research could evaluate whether standardized and optimized rehabilitation over the long term would allow early KES improvements with ACB to be maintained over a period of weeks or months.

US regional and demographic differences in prescription opioid and heroin-related overdose hospitalizations.

PubMed

Unick, George Jay; Ciccarone, Daniel

2017-08-01

US opioid overdose death rates have increased between 2000 and 2014. While, the increase in prescription opioid use has been linked to the increase in heroin use, there are reasons to view this relationship as a partial explanation for the recent increase in heroin-related harms. This study documents the differences in trends in prescription opioid overdose-related (POD) and heroin overdose-related (HOD) hospitalizations. Data come from the National Inpatient Sample (NIS) for the years 2000 through 2014. POD and HOD hospitalizations were abstracted from ICD-9 codes. Rates of POD and HOD by census region and census division were constructed along with separate rates for age and race. Regression analysis analyzing trends across region were estimated along with graphs for documenting differences in POD and HOD rates. POD hospitalization rates were highest in the South and lowest in the Northeast. HOD hospitalization rates were highest in the Northeast region and grew the fastest in the Midwest. There was statistically significant heterogeneity in HOD trends but not POD trends across the four regions between 2000 and 2014. Between 2012 and 2014 POD rates decreased in eight of the nine census divisions, with only New England showing an increase. HOD hospitalization rates increased in all nine census divisions between 2012 and 2014. Both POD and HOD rates show different demographic patterns across the nine census divisions. Comparing POD and HOD hospitalization trends reveals significant disparities in geographic as well as demographic distributions. These epidemics are evolving and the simple opioid-to-heroin transition story is both supported and challenged by this paper. The opioid pill, heroin and fentanyl crises are intertwined yet increasingly have drivers and outcomes that support examining them as distinct. Addressing these complex and interrelated epidemics will require innovative public health research and interventions which need to consider local and regional contexts. Copyright © 2017 Elsevier B.V. All rights reserved.

Eddy current crack detection capability assessment approach using crack specimens with differing electrical conductivity

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2018-03-01

Like other NDE methods, eddy current surface crack detectability is determined using probability of detection (POD) demonstration. The POD demonstration involves eddy current testing of surface crack specimens with known crack sizes. Reliably detectable flaw size, denoted by, a90/95 is determined by statistical analysis of POD test data. The surface crack specimens shall be made from a similar material with electrical conductivity close to the part conductivity. A calibration standard with electro-discharged machined (EDM) notches is typically used in eddy current testing for surface crack detection. The calibration standard conductivity shall be within +/- 15% of the part conductivity. This condition is also applicable to the POD demonstration crack set. Here, a case is considered, where conductivity of the crack specimens available for POD testing differs by more than 15% from that of the part to be inspected. Therefore, a direct POD demonstration of reliably detectable flaw size is not applicable. Additional testing is necessary to use the demonstrated POD test data. An approach to estimate the reliably detectable flaw size in eddy current testing for part made from material A using POD crack specimens made from material B with different conductivity is provided. The approach uses additional test data obtained on EDM notch specimens made from materials A and B. EDM notch test data from the two materials is used to create a transfer function between the demonstrated a90/95 size on crack specimens made of material B and the estimated a90/95 size for part made of material A. Two methods are given. For method A, a90/95 crack size for material B is given and POD data is available. Objective of method A is to determine a90/95 crack size for material A using the same relative decision threshold that was used for material B. For method B, target crack size a90/95 for material A is known. Objective is to determine decision threshold for inspecting material A.

The Pēpi-Pod study: Overnight video, oximetry and thermal environment while using an in-bed sleep device for sudden unexpected death in infancy prevention.

PubMed

Tipene-Leach, David; Baddock, Sally A; Williams, Sheila M; Tangiora, Angeline; Jones, Raymond; McElnay, Caroline; Taylor, Barry J

2018-06-01

The aim of this study was to identify the potential risks and benefits of sleeping infants in a Pēpi-Pod distributed to families with high risk of sudden unexpected death in infancy compared to a bassinet. Forty-five mostly indigenous Māori mothers who were referred by local health providers to receive a Pēpi-Pod were surveyed at recruitment, 1 and 3 months. A sleep study at 1 month included infrared video, oximetry and temperature measures. When compared with 89 historical bassinet controls, an intention-to-treat analysis of questionnaires showed no increase in direct bed sharing but demonstrated significantly less sharing of the maternal bedroom at both interviews, with the majority of those not sleeping in the maternal bedroom, actually sleeping in the living room. The 1 month 'as-used' analysis showed poorer maternal sleep quality. The 'as-used' analysis of video data (24 Pēpi-Pod and 113 bassinet infants) also showed no increase in direct bed sharing, head covering or prone/side sleep position. Differences in oxygen saturation were not significant, but heart rate was higher in the Pēpi-Pod infants by 8.37 bpm (95% confidence interval 4.40, 12.14). Time in the thermal comfort zone was not different between groups despite Pēpi-Pod infants being situated in significantly warmer rooms. Overall, we found that most differences in infant risk behaviours in a Pēpi-Pod compared to a bassinet were small, with confidence intervals excluding meaningful differences. We noted poorer maternal sleep quality at 1 month. Higher infant heart rates in the Pēpi-Pod group may be related to higher room temperatures. The Pēpi-Pod appears physiologically safe but is associated with lower reported maternal sleep quality. © 2018 Paediatrics and Child Health Division (The Royal Australasian College of Physicians).

Evaluation of the BOD POD for estimating percent body fat in collegiate track and field female athletes: a comparison of four methods.

PubMed

Bentzur, Keren M; Kravitz, Len; Lockner, Donna W

2008-11-01

This investigation examined the accuracy of the BOD POD on a group of Division I collegiate track and field female athletes (N = 30). Hydrostatic weighing (HW) was used as the gold standard method. Body density (Db) values obtained from the BOD POD (Db BP) were compared with those determined by HW (Db HW). Both Db values were converted to percent body fat (%BF) using the Siri equation for comparison. Percent body fat values obtained from the BOD POD (BF BP) were also compared with those obtained from dual-energy X-ray absorptiometry (DXA, BF DXA) and skinfold (SF, BF SF). The validity of the BOD POD was assessed using repeated-measures analysis of variance (ANOVA), and the relationship between the methods was examined through Pearson correlation. Average Db BP was 0.00890 g x cm(-3) lower (p < 0.05) than Db HW, resulting in a significant overestimation of %BF (p < 0.05) by the BOD POD. Values for BFDXA and BFBP also differed significantly (p < 0.05). On the other hand, BFSF and BF BP were not significantly different. The correlation between percent body fat values obtained from HW (BFHW) and BF BP was good (r = 0.88, SEE = 2.30) as well as between BF SF and BF BP (r = 0.85, SEE = 2.05). Conversely, the correlation between BFDXA and BF BP was poor (r = 0.25, SEE = 5.73). The strong correlation between BF BP and BF HW presented here suggests that the BOD POD has the potential to be used as a body composition analysis tool for female athletes. The advantages of the BOD POD over HW encourage further investigation of this instrument. However, the fact that the BOD POD and SF results did not differ significantly might suggest that the SF could be used in its place until a better rate of accuracy for this instrument is established.

Deriving Points of Departure and Performance Baselines for Predictive Modeling of Systemic Toxicity using ToxRefDB (SOT)

EPA Science Inventory

A primary goal of computational toxicology is to generate predictive models of toxicity. An elusive target of alternative test methods and models has been the accurate prediction of systemic toxicity points of departure (PoD). We aim not only to provide a large and valuable resou...

Size variation of Acacia caven (leguminosae) pods along a climatic gradient in Chile

NASA Astrophysics Data System (ADS)

Gutiérrez, J. R.; Armesto, J. J.

1981-06-01

A southward tendency of increment in pod-length is shown for 11 populations of Acacia caven (Mol.) Hook et Arn. localized along a climatic gradient of increasing annual rainfall in Chile. This fact would suggest that A. caven populations occurring in the south are in better conditions for reproduction than northern populations, since pod-length is related to the amount of seeds inside the pods. The possible bearing of this southward tendency of increasing seed production upon the expansion of A. caven toward the more humid zones in southern Chile is discussed.

Promoting Higher Order Thinking Skills via IPTEACES e-Learning Framework in the Learning of Information Systems Units

ERIC Educational Resources Information Center

Isaias, Pedro; Issa, Tomayess; Pena, Nuno

2014-01-01

When developing and working with various types of devices from a supercomputer to an iPod Mini, it is essential to consider the issues of Human Computer Interaction (HCI) and Usability. Developers and designers must incorporate HCI, Usability and user satisfaction in their design plans to ensure that systems are easy to learn, effective,…

The quality of life of patients developed delirium after coronary artery bypass grafting is determined by cognitive function after discharge: A cross-sectional study.

PubMed

Chen, Yuling; Ding, Shu; Tao, Xiangjun; Feng, Xinwei; Lu, Sai; Shen, Yuzhi; Wu, Ying; An, Xiangguang

2017-10-01

Postoperative delirium (POD) and declined cognitive function were common in patients (especially elderly patients) who underwent coronary artery bypass grafting (CABG), which may affect quality of life (QoL). The aim of this study was to determine the relationships among age, POD, declined cognitive function, and QoL in patients who underwent CABG. Consecutive patients who underwent first time elective CABG and assessed for POD using Confusion Assessment Method for intensive care unit for 5 postoperative days from November 2013 to March 2015 were recruited. A cross-sectional study was conducted during April 2015 to assess their cognitive function and QoL, using the Telephone Interview for Cognitive Status Scale and Medical Outcomes Study 36-Item Short Form Health Survey. The relationships among age, POD, declined cognitive function, and QoL were tested using path analysis. Declined cognitive function was associated with poorer QoL. POD was associated with declined cognitive function but was not associated with poorer QoL. Ageing was not associated with QoL but was associated with POD and declined cognitive function. The QoL of patients developed delirium after CABG is determined by cognitive function after discharge. Necessary strategies should be implemented to prevent POD and declined cognitive function, especially in elderly patients. © 2017 John Wiley & Sons Australia, Ltd.

Multigenic Control of Pod Shattering Resistance in Chinese Rapeseed Germplasm Revealed by Genome-Wide Association and Linkage Analyses

PubMed Central

Liu, Jia; Wang, Jun; Wang, Hui; Wang, Wenxiang; Zhou, Rijin; Mei, Desheng; Cheng, Hongtao; Yang, Juan; Raman, Harsh; Hu, Qiong

2016-01-01

The majority of rapeseed cultivars shatter seeds upon maturity especially under hot-dry and windy conditions, reducing yield and gross margin return to growers. Here, we identified quantitative trait loci (QTL) for resistance to pod shatter in an unstructured diverse panel of 143 rapeseed accessions, and two structured populations derived from bi-parental doubled haploid (DH) and inter-mated (IF2) crosses derived from R1 (resistant to pod shattering) and R2 (prone to pod shattering) accessions. Genome-wide association analysis identified six significant QTL for resistance to pod shatter located on chromosomes A01, A06, A07, A09, C02, and C05. Two of the QTL, qSRI.A09 delimited with the SNP marker Bn-A09-p30171993 (A09) and qSRI.A06 delimited with the SNP marker Bn-A06-p115948 (A06) could be repeatedly detected across environments in a diversity panel, DH and IF2 populations, suggesting that at least two loci on chromosomes A06 and A09 were the main contributors to pod shatter resistance in Chinese germplasm. Significant SNP markers identified in this study especially those that appeared repeatedly across environments provide a cost-effective and an efficient method for introgression and pyramiding of favorable alleles for pod shatter resistance via marker-assisted selection in rapeseed improvement programs. PMID:27493651

Performance Evaluation of the United Nations Environment ...

EPA Pesticide Factsheets

A request for technical collaboration between the UNEP and the US EPA resulted in the establishment of a MCRADA. The purpose of this agreement was to evaluate an air quality monitoring system (referred to as the UNEP pod) developed by the UNEP for use in environmental situations where more sophisticated monitoring instrumentation was not available. The US EPA has conducted numerous evaluations of other similar sensor pods at its Research Triangle Park, NC research campus and has trained staff as well as established research designs for such efforts. Under the terms of the MCRADA, the US EPA would operate the pod using UNEP provided operating procedures in a manner consistent with its planned intent of deployment. The US EPA would collect air quality monitoring data from the pod involving select environmental measures over a period of approximately one month. Reference monitoring data collected from collocated federal regulatory monitors would be used to establish a comparison between the two systems and thus establishment of performance characteristics. In addition, the US EPA would provide feedback information to the UNEP as to observed ease of use features of the pod that would be beneficial in its future evolution and deployment. The UNEP recently developed a multipollutant sensor pod called the UNEP Air Quality Monitoring Unit, herein simply defined as the UNEP pod (http://aqicn.org/faq/2015-10-28/unep-air-quality-monitoring-station/). First introduced in 20

Decentralizing the Team Station: Simulation before Reality as a Best-Practice Approach.

PubMed

Charko, Jackie; Geertsen, Alice; O'Brien, Patrick; Rouse, Wendy; Shahid, Ammarah; Hardenne, Denise

2016-01-01

The purpose of this article is to share the logistical planning requirements and simulation experience of one Canadian hospital as it prepared its staff for the change from a centralized inpatient unit model to the decentralized design planned for its new community hospital. With the commitment and support of senior leadership, project management resources and clinical leads worked collaboratively to design a decentralized prototype in the form of a pod-style environment in the hospital's current setting. Critical success factors included engaging the right stakeholders, providing an opportunity to test new workflows and technology, creating a strong communication plan and building on lessons learned as subsequent pod prototypes are launched.

Killer whales are capable of vocal learning

PubMed Central

Foote, Andrew D; Griffin, Rachael M; Howitt, David; Larsson, Lisa; Miller, Patrick J.O; Rus Hoelzel, A

2006-01-01

The production learning of vocalizations by manipulation of the sound production organs to alter the physical structure of sound has been demonstrated in only a few mammals. In this natural experiment, we document the vocal behaviour of two juvenile killer whales, Orcinus orca, separated from their natal pods, which are the only cases of dispersal seen during the three decades of observation of their populations. We find mimicry of California sea lion (Zalophus californianus) barks, demonstrating the vocal production learning ability for one of the calves. We also find differences in call usage (compared to the natal pod) that may reflect the absence of a repertoire model from tutors or some unknown effect related to isolation or context. PMID:17148275

Dynamic Control of Facts Devices to Enable Large Scale Penetration of Renewable Energy Resources

NASA Astrophysics Data System (ADS)

Chavan, Govind Sahadeo

This thesis focuses on some of the problems caused by large scale penetration of Renewable Energy Resources within EHV transmission networks, and investigates some approaches in resolving these problems. In chapter 4, a reduced-order model of the 500 kV WECC transmission system is developed by estimating its key parameters from phasor measurement unit (PMU) data. The model was then implemented in RTDS and was investigated for its accuracy with respect to the PMU data. Finally it was tested for observing the effects of various contingencies like transmission line loss, generation loss and large scale penetration of wind farms on EHV transmission systems. Chapter 5 introduces Static Series Synchronous Compensators (SSSC) which are seriesconnected converters that can control real power flow along a transmission line. A new application of SSSCs in mitigating Ferranti effect on unloaded transmission lines was demonstrated on PSCAD. A new control scheme for SSSCs based on the Cascaded H-bridge (CHB) converter configuration was proposed and was demonstrated using PSCAD and RTDS. A new centralized controller was developed for the distributed SSSCs based on some of the concepts used in the CHB-based SSSC. The controller's efficacy was demonstrated using RTDS. Finally chapter 6 introduces the problem of power oscillations induced by renewable sources in a transmission network. A power oscillation damping (POD) controller is designed using distributed SSSCs in NYPA's 345 kV three-bus AC system and its efficacy is demonstrated in PSCAD. A similar POD controller is then designed for the CHB-based SSSC in the IEEE 14 bus system in PSCAD. Both controllers were noted to have significantly damped power oscillations in the transmission networks.

Precise Orbit Determination Of Low Earth Satellites At AIUB Using GPS And SLR Data

NASA Astrophysics Data System (ADS)

Jaggi, A.; Bock, H.; Thaller, D.; Sosnica, K.; Meyer, U.; Baumann, C.; Dach, R.

2013-12-01

An ever increasing number of low Earth orbiting (LEO) satellites is, or will be, equipped with retro-reflectors for Satellite Laser Ranging (SLR) and on-board receivers to collect observations from Global Navigation Satellite Systems (GNSS) such as the Global Positioning System (GPS) and the Russian GLONASS and the European Galileo systems in the future. At the Astronomical Institute of the University of Bern (AIUB) LEO precise orbit determination (POD) using either GPS or SLR data is performed for a wide range of applications for satellites at different altitudes. For this purpose the classical numerical integration techniques, as also used for dynamic orbit determination of satellites at high altitudes, are extended by pseudo-stochastic orbit modeling techniques to efficiently cope with potential force model deficiencies for satellites at low altitudes. Accuracies of better than 2 cm may be achieved by pseudo-stochastic orbit modeling for satellites at very low altitudes such as for the GPS-based POD of the Gravity field and steady-state Ocean Circulation Explorer (GOCE).

Isolation and identification of mycoparasitic isolates of Trichoderma asperellum with potential for suppression of black pod disease of cacao in Cameroon

USDA-ARS?s Scientific Manuscript database

Alternative measures to chemical fungicides are needed to control Phytophthora megakarya, the main causal agent of black pod diseasein Central and West Africa. Precolonized plate and detached cacao pod assays were used to screen fungal isolates for mycoparasitismon P. megakarya. Of over 200 isolates...

Teaching Adults with Moderate Intellectual Disability ATM Use via the "iPod"

ERIC Educational Resources Information Center

Scott, Renee; Collins, Belva; Knight, Victoria; Kleinert, Harold

2013-01-01

Money management can increase independence and access to communities for individuals with disabilities. Although research on computer-based instruction for teaching banking skills to students with intellectual disability is established, the use of portable electronic devices (e.g., iPod) has not been evaluated. iPods may be an effective, portable,…

Ecology of the cocoa pod borer, Conopomorpha cramerella (Lepidoptera: Gracillariidae), a major pest for the cocoa industry

USDA-ARS?s Scientific Manuscript database

Conopomorpha cramerella, the cocoa pod borer (CPB), has been known to damage cocoa pods for more than 100 years, but information on the ecology of this species is scant in the scientific literature. That which does exist is scattered in obscure local journals, not readily accessible, and often unve...

21 CFR 155.200 - Certain other canned vegetables.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Bottom cuts or cuts—tips removed. Bean sprouts Sprouts of the Mung bean Shelled beans Seed shelled from green or wax bean pods, with or without snaps (pieces of immature unshelled pods) Lima beans or butter beans Seed shelled from the pods of the lima bean plant Beets Root of the beet plant Whole; slices or...

21 CFR 155.200 - Certain other canned vegetables.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Bottom cuts or cuts—tips removed. Bean sprouts Sprouts of the Mung bean Shelled beans Seed shelled from green or wax bean pods, with or without snaps (pieces of immature unshelled pods) Lima beans or butter beans Seed shelled from the pods of the lima bean plant Beets Root of the beet plant Whole; slices or...

7 CFR 319.56-62 - Fresh beans, shelled or in pods, from Jordan.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Fresh beans, shelled or in pods, from Jordan. 319.56... Vegetables § 319.56-62 Fresh beans, shelled or in pods, from Jordan. Fresh beans (Phaseolus vulgaris L... Spodoptera littoralis. (a) Packinghouse requirements. The beans must be packed in packing facilities that are...

Molecular and metabolic changes of cherelle wilt of cacao and its effect on Moniliophthora roreri

USDA-ARS?s Scientific Manuscript database

The seeds of Theobroma cacao L. pods are processed into cocoa products. Cherelle wilt is physiological thinning of young pods that result in loss of potential pods. Cherelle wilt first occurs 50 days after pollination (DAP) and a second thinning occurs around 70 DAP. Cherelles are also highly sus...

[Diagnostic value of dynamic monitoring of C-reactive protein in drain drainage to predict early anastomotic leakage after colorectal cancer surgery].

PubMed

Lu, Jia; Zheng, Lei; Li, Runtian; Hao, Chunmin; Gao, Wenbin; Feng, Ziwei; Yin, Guangya; Wang, Yue

2017-09-25

To evaluate the diagnostic value of dynamic monitoring of C-reactive protein (CRP) in drainage fluid in predicting early anastomotic leakage after colorectal surgery. This study enrolled 172 patients, who were diagnosed as colorectal cancer before operation and underwent radical surgery, without residual tumor tissues by postoperative pathology and perioperative infection, at the Tianjin Medical University Cancer Hospital between July 2015 and January 2016. The C-reactive(CRP) protein level in drainage fluid was continuously monitored from postoperative days (POD) 1 to 5. CRP level was compared between anastomotic leakage (AL) group and non-anastomotic leakage (NAL) group. Receiver operating characteristics (ROC) curve was used to estimate the value of monitoring CRP in drainage fluid to predict anastomotic leakage after colorectal surgery. Among 172 patients, 101 cases were male and 71 cases were female, with age of (59.9±10.3) years. Anastomotic leakage occurred after colorectal surgery in 24 cases(14.0%, AL group ) and other 148 cases were defined as NAL group. Other than body mass index (BMI), differences in baseline data were not statistically significant between two groups. The CRP lever in AL group and NAL group showed rising trend from POD1 to POD4 [Day 1: (6.7±8.4) g/L vs. (8.0±10.6) g/L; Day 2: (24.8±14.6) g/L vs. (28.3±21.1) g/L, Day 3: (54.8±26.5) g/L vs. (53.8±27.6)g/L, Day 4: (62.0±32.2) g/L vs. (58.4±30.7) g/L], while the differences were not significant (all P>0.05). At POD 5, the CRP lever of AL group increased continuously, while that of NAL group decreased with significant difference [(65.3±38.9) g/L vs. (44.7±39.5) g/L, t=-2.85, P=0.005]. Further stratification analysis on AL group revealed CRP level in early AL (AL occurrence POD 10) showed rising trend from POD 1 to 4, then decreased slightly at POD 5, but whose differences were not significant (all P>0.05). ROC curve was drawn with AL condition as state variables and CRP level as test variables. The AUC of POD 1 to 4 was 0.425, 0.487, 0.510, 0.522 respectively and the AUC of POD 5 was the largest, 0.657 (95%CI:0.537-0.777). The largest Youden Index was 0.274. The critical value of CRP was 27.15 g/L. When this value was used as the point of tangency to predict the occurrence of AL, the sensitivity was 87.5%, the specificity was 39.9%, positive predictive value was 19.1%, and negative predictive value was 95.2%. Continuous increase of CRP level in abdominal drainage fluid from POD 1 to POD 5 indicates the occurrence of AL after colorectal cancer operation, especially the detection of CRP level at POD 5 is important.

Response of chickpea (Cicer arietinum L.) to terminal drought: leaf stomatal conductance, pod abscisic acid concentration, and seed set.

PubMed

Pang, Jiayin; Turner, Neil C; Khan, Tanveer; Du, Yan-Lei; Xiong, Jun-Lan; Colmer, Timothy D; Devilla, Rosangela; Stefanova, Katia; Siddique, Kadambot H M

2017-04-01

Flower and pod production and seed set of chickpea (Cicer arietinum L.) are sensitive to drought stress. A 2-fold range in seed yield was found among a large number of chickpea genotypes grown at three dryland field sites in south-western Australia. Leaf water potential, photosynthetic characteristics, and reproductive development of two chickpea genotypes with contrasting yields in the field were compared when subjected to terminal drought in 106kg containers of soil in a glasshouse. The terminal drought imposed from early podding reduced biomass, reproductive growth, harvest index, and seed yield of both genotypes. Terminal drought at least doubled the percentage of flower abortion, pod abscission, and number of empty pods. Pollen viability and germination decreased when the fraction of transpirable soil water (FTSW) decreased below 0.18 (82% of the plant-available soil water had been transpired); however, at least one pollen tube in each flower reached the ovary. The young pods which developed from flowers produced when the FTSW was 0.50 had viable embryos, but contained higher abscisic acid (ABA) concentrations than those of the well-watered plants; all pods ultimately aborted in the drought treatment. Cessation of seed set at the same soil water content at which stomata began to close and ABA increased strongly suggested a role for ABA signalling in the failure to set seed either directly through abscission of developing pods or seeds or indirectly through the reduction of photosynthesis and assimilate supply to the seeds. © The Author 2016. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Nutrient Digestibility and Metabolizable Energy Content of Mucuna pruriens Whole Pods Fed to Growing Pelibuey Lambs

PubMed Central

Loyra-Tzab, Enrique; Sarmiento-Franco, Luis Armando; Sandoval-Castro, Carlos Alfredo; Santos-Ricalde, Ronald Herve

2013-01-01

The nutrient digestibility, nitrogen balance and in vivo metabolizable energy supply of Mucuna pruriens whole pods fed to growing Pelibuey lambs was investigated. Eight Pelibuey sheep housed in metabolic crates were fed increasing levels of Mucuna pruriens pods: 0 (control), 100 (Mucuna100), 200 (Mucuna200) and 300 (Mucuna300) g/kg dry matter. A quadratic (p<0.002) effect was observed for dry matter (DM), neutral detergent fibre (aNDF), nitrogen (N) and gross energy (GE) intakes with higher intakes in the Mucuna100 and Mucuna200 treatments. Increasing M. pruriens in the diets had no effect (p>0.05) on DM and GE apparent digestibility (p<0.05). A linear reduction in N digestibility and N retention was observed with increasing mucuna pod level. This effect was accompanied by a quadratic effect (p<0.05) on fecal-N and N-balance which were higher in the Mucuna100 and Mucuna200 treatments. Urine-N excretion, GE retention and dietary estimated nutrient supply (metabolizable protein and metabolizable energy) were not affected (p>0.05). DM, N and GE apparent digestibility coefficient of M. pruriens whole pods obtained through multiple regression equations were 0.692, 0.457, 0.654 respectively. In vivo DE and ME content of mucuna whole pod were estimated in 11.0 and 9.7 MJ/kg DM. It was concluded that whole pods from M. pruriens did not affect nutrient utilization when included in an mixed diet up to 200 g/kg DM. This is the first in vivo estimation of mucuna whole pod ME value for ruminants. PMID:25049876

Small RNA profiling and degradome analysis reveal regulation of microRNA in peanut embryogenesis and early pod development.

PubMed

Gao, Chao; Wang, Pengfei; Zhao, Shuzhen; Zhao, Chuanzhi; Xia, Han; Hou, Lei; Ju, Zheng; Zhang, Ye; Li, Changsheng; Wang, Xingjun

2017-03-02

As a typical geocarpic plant, peanut embryogenesis and pod development are complex processes involving many gene regulatory pathways and controlled by appropriate hormone level. MicroRNAs (miRNAs) are small non-coding RNAs that play indispensable roles in post-transcriptional gene regulation. Recently, identification and characterization of peanut miRNAs has been described. However, whether miRNAs participate in the regulation of peanut embryogenesis and pod development has yet to be explored. In this study, small RNA and degradome libraries from peanut early pod of different developmental stages were constructed and sequenced. A total of 70 known and 24 novel miRNA families were discovered. Among them, 16 miRNA families were legume-specific and 12 families were peanut-specific. 30 known and 10 novel miRNA families were differentially expressed during pod development. In addition, 115 target genes were identified for 47 miRNA families by degradome sequencing. Several new targets that might be specific to peanut were found and further validated by RNA ligase-mediated rapid amplification of 5' cDNA ends (RLM 5'-RACE). Furthermore, we performed profiling analysis of intact and total transcripts of several target genes, demonstrating that SPL (miR156/157), NAC (miR164), PPRP (miR167 and miR1088), AP2 (miR172) and GRF (miR396) are actively modulated during early pod development, respectively. Large numbers of miRNAs and their related target genes were identified through deep sequencing. These findings provided new information on miRNA-mediated regulatory pathways in peanut pod, which will contribute to the comprehensive understanding of the molecular mechanisms that governing peanut embryo and early pod development.

An iPod treatment of amblyopia: an updated binocular approach.

PubMed

Hess, Robert F; Thompson, B; Black, J M; Machara, G; Zhang, P; Bobier, W R; Cooperstock, J

2012-02-15

We describe the successful translation of computerized and space-consuming laboratory equipment for the treatment of suppression to a small handheld iPod device (Apple iPod; Apple Inc., Cupertino, California). A portable and easily obtainable Apple iPod display, using current video technology offers an ideal solution for the clinical treatment of suppression. The following is a description of the iPod device and illustrates how a video game has been adapted to provide the appropriate stimulation to implement our recent antisuppression treatment protocol. One to 2 hours per day of video game playing under controlled conditions for 1 to 3 weeks can improve acuity and restore binocular function, including stereopsis in adults, well beyond the age at which traditional patching is used. This handheld platform provides a convenient and effective platform for implementing the newly proposed binocular treatment of amblyopia in the clinic, home, or elsewhere. American Optometric Association.

Results from the EPL monkey-pod experiment conducted as part of the 1974 NASA/Ames shuttle CVT-2

NASA Technical Reports Server (NTRS)

Rahlmann, D. F.; Kodama, A. M.; Mains, R. C.; Pace, N.

1974-01-01

The participation of the Environmental Physiology Laboratory (EPL) in the general purpose laboratory concept verification test 3 is documented. The EPL Monkey-Pod Experiment was designed to incorporate a 10-12 kg, pig tailed monkey, Macaca nemestrina, into the pod and measure the physiological responses of the animal continuously. Four major elements comprise the EPL Monkey-Pod Experiment System: (1) a fiberglass pod containing the instrumented monkey plus feeder and watering devices, (2) an inner console containing the SKYLAB mass spectrometer with its associated valving and electronic controls, sensing, control and monitoring units for lower body negative pressure, feeder activity, waterer activity, temperatures, and gas metabolism calibration, (3) an umbilical complex comprising gas flow lines and electrical cabling between the inner and outer console and (4) an outer console in principle representing the experiment support to be provided from general spacecraft sources.

Precise Orbit Determination for LEO Spacecraft Using GNSS Tracking Data from Multiple Antennas

NASA Technical Reports Server (NTRS)

Kuang, Da; Bertiger, William; Desai, Shailen; Haines, Bruce

2010-01-01

To support various applications, certain Earth-orbiting spacecrafts (e.g., SRTM, COSMIC) use multiple GNSS antennas to provide tracking data for precise orbit determination (POD). POD using GNSS tracking data from multiple antennas poses some special technical issues compared to the typical single-antenna approach. In this paper, we investigate some of these issues using both real and simulated data. Recommendations are provided for POD with multiple GNSS antennas and for antenna configuration design. The observability of satellite position with multiple antennas data is compared against single antenna case. The impact of differential clock (line biases) and line-of-sight (up, along-track, and cross-track) on kinematic and reduced-dynamic POD is evaluated. The accuracy of monitoring the stability of the spacecraft structure by simultaneously performing POD of the spacecraft and relative positioning of the multiple antennas is also investigated.

Modified behaviour in nucleopolyhedro virus infected field bean pod borer, Adisura atkinsoni and its impact on assessing the field efficacy of NPV.

PubMed

Narayanan, K

2003-04-01

When nucleopolyhedro virus of A. atkinsoni was applied at 250 LE/ha, there was no significant difference between the viruses treated and control plots with regard to the total number of live larvae feeding outside the pod. However, due to changes in behaviour in NPV infected A. atkinsoni by way of coming out of the pod, there was a significant difference when counts were taken with regard to total number of larvae found feeding inside the pod. Both endosulfan at (0.07%) and virus (125 LE/ha) in combination with endosulfan (0.035%) significantly reduced the larval population of A. atkinsoni and Sphaenarches anisodactylus. There was no significant difference between the virus and control plots with regard to percentage of pod damage. However, when the yield was assessed based on the seed weight, there was significant difference.

Optimizing Probability of Detection Point Estimate Demonstration

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2017-01-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-18231and associated mh18232POD software gives most common methods of POD analysis. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using Point Estimate Method. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible.

Results from the EPL monkey-pod flight experiments conducted aboard the NASA/Ames CV-990, May 1976

NASA Technical Reports Server (NTRS)

Rahlmann, D. F.; Kodama, A. M.; Mains, R. C.; Pace, N.

1976-01-01

The participation of the Environmental Physiology Laboratory (EPL) in the general purpose laboratory concept verification test 3 is documented. The EPL Monkey-Pod Experiment was designed to incorporate a 10-12 kg, pig tailed monkey, Macaca nemestrina, into the pod and measure the physiological responses of the animal continously. Four major elements comprise the EPL Monkey-Pod Experiment System: (1) a fiberglass pod containing the instrumented monkey plus feeder and watering devices, (2) an inner console containing the SKYLAB mass spectrometer with its associated valving and electronic controls, sensing, control and monitoring units for lower body negative pressure, feeder activity, waterer activity, temperatures, and gas metabolism calibration, (3) an umbilical complex comprising gas flow lines and electrical cabling between the inner and outer console and (4) an outer console in principle representing the experiment support to be provided from general space craft sources.

Tree spatial structure, host composition and resource availability influence mirid density or black pod prevalence in cacao agroforests in Cameroon.

PubMed

Gidoin, Cynthia; Babin, Régis; Bagny Beilhe, Leïla; Cilas, Christian; ten Hoopen, Gerben Martijn; Bieng, Marie Ange Ngo

2014-01-01

Combining crop plants with other plant species in agro-ecosystems is one way to enhance ecological pest and disease regulation mechanisms. Resource availability and microclimatic variation mechanisms affect processes related to pest and pathogen life cycles. These mechanisms are supported both by empirical research and by epidemiological models, yet their relative importance in a real complex agro-ecosystem is still not known. Our aim was thus to assess the independent effects and the relative importance of different variables related to resource availability and microclimatic variation that explain pest and disease occurrence at the plot scale in real complex agro-ecosystems. The study was conducted in cacao (Theobroma cacao) agroforests in Cameroon, where cocoa production is mainly impacted by the mirid bug, Sahlbergella singularis, and black pod disease, caused by Phytophthora megakarya. Vegetation composition and spatial structure, resource availability and pest and disease occurrence were characterized in 20 real agroforest plots. Hierarchical partitioning was used to identify the causal variables that explain mirid density and black pod prevalence. The results of this study show that cacao agroforests can be differentiated on the basis of vegetation composition and spatial structure. This original approach revealed that mirid density decreased when a minimum number of randomly distributed forest trees were present compared with the aggregated distribution of forest trees, or when forest tree density was low. Moreover, a decrease in mirid density was also related to decreased availability of sensitive tissue, independently of the effect of forest tree structure. Contrary to expectations, black pod prevalence decreased with increasing cacao tree abundance. By revealing the effects of vegetation composition and spatial structure on mirids and black pod, this study opens new perspectives for the joint agro-ecological management of cacao pests and diseases at the plot scale, through the optimization of the spatial structure and composition of the vegetation.

Tree Spatial Structure, Host Composition and Resource Availability Influence Mirid Density or Black Pod Prevalence in Cacao Agroforests in Cameroon

PubMed Central

Gidoin, Cynthia; Babin, Régis; Bagny Beilhe, Leïla; Cilas, Christian; ten Hoopen, Gerben Martijn; Bieng, Marie Ange Ngo

2014-01-01

Combining crop plants with other plant species in agro-ecosystems is one way to enhance ecological pest and disease regulation mechanisms. Resource availability and microclimatic variation mechanisms affect processes related to pest and pathogen life cycles. These mechanisms are supported both by empirical research and by epidemiological models, yet their relative importance in a real complex agro-ecosystem is still not known. Our aim was thus to assess the independent effects and the relative importance of different variables related to resource availability and microclimatic variation that explain pest and disease occurrence at the plot scale in real complex agro-ecosystems. The study was conducted in cacao (Theobroma cacao) agroforests in Cameroon, where cocoa production is mainly impacted by the mirid bug, Sahlbergella singularis, and black pod disease, caused by Phytophthora megakarya. Vegetation composition and spatial structure, resource availability and pest and disease occurrence were characterized in 20 real agroforest plots. Hierarchical partitioning was used to identify the causal variables that explain mirid density and black pod prevalence. The results of this study show that cacao agroforests can be differentiated on the basis of vegetation composition and spatial structure. This original approach revealed that mirid density decreased when a minimum number of randomly distributed forest trees were present compared with the aggregated distribution of forest trees, or when forest tree density was low. Moreover, a decrease in mirid density was also related to decreased availability of sensitive tissue, independently of the effect of forest tree structure. Contrary to expectations, black pod prevalence decreased with increasing cacao tree abundance. By revealing the effects of vegetation composition and spatial structure on mirids and black pod, this study opens new perspectives for the joint agro-ecological management of cacao pests and diseases at the plot scale, through the optimization of the spatial structure and composition of the vegetation. PMID:25313514

User evaluations offer promise for pod-intravaginal ring as a drug delivery platform: A mixed methods study of acceptability and use experiences.

PubMed

Guthrie, Kate M; Rosen, Rochelle K; Vargas, Sara E; Getz, Melissa L; Dawson, Lauren; Guillen, Melissa; Ramirez, Jaime J; Baum, Marc M; Vincent, Kathleen L

2018-01-01

Effective HIV prevention requires efficient delivery of safe and efficacious drugs and optimization of user adherence. The user's experiences with the drug, delivery system, and use parameters are critical to product acceptability and adherence. Prevention product developers have the opportunity to directly control a drug delivery system and its impact on acceptability and adherence, as well as product efficacy. Involvement of potential users during preclinical design and development can facilitate this process. We embedded a mixed methods user evaluation study into a safety and pharmacokinetics (PK) trial of a pod-intravaginal ring delivering antiretroviral agents. Women enrolled in two cohorts, ultimately evaluating the safety/PK of a pod-IVRs delivering TDF-alone, TDF-FTC, and/or TDF-FTC-MVC. A 7-day use period was targeted for each pod-IVR, regardless of drug or drug combination. During the clinical study, participants provided both quantitative (i.e., survey) and qualitative (i.e., in-depth interview) data capturing acceptability, perceptibility, and adherence behaviors. Initial sexual and reproductive health history surveys, daily diaries, a final acceptability and willingness to use survey, and a qualitative in-depth interview comprised the user evaluation data for each pod-IVR experienced by the participants. Overall, the majority of participants (N = 10) reported being willing to use the pod-IVR platform for HIV prevention should it advance to market. Confidence to use the pod-IVR (e.g., insertion, removal) was high. There were no differences noted in the user experience of the pod-IVR platform; that is, whether the ring delivered TDF-alone, TDF-FTC, or TDF-FTC-MVC, users' experiences of the ring were similar and acceptable. Participants did report specific experiences, both sensory and behavioral, that impacted their use behaviors with respect to the ring, and which could ultimately impact acceptability and adherence. These experiences, and user evaluations elicited by them, could both challenge use or be used to leverage use in future trials and product rollout once fully articulated. High willingness-to-use data and lack of salient differences in user experiences related to use of the pod-IVR platform (regardless of agents delivered) suggests that the pod-IVR is a feasible and acceptable drug delivery device in and of itself. This finding holds promise both for an anti-HIV pod-IVR and, potentially, a multipurpose prevention pod-IVR that could deliver both prevention for sexually transmitted infections (STIs) including HIV and contraception. Given the very early clinical trial context, further acceptability, perceptibility, and adherence data should continue to be explored, in the context of longer use periods (e.g., 28-day ring use), and in the contexts of sexual activity and menses. Using early design and development contexts to gain insights into potential challenges and facilitators of drug delivery systems such as the pod-IVR could save valuable resources and time as a potential biomedical technology moves through the clinical trial pipeline and into real-world use.

User evaluations offer promise for pod-intravaginal ring as a drug delivery platform: A mixed methods study of acceptability and use experiences

PubMed Central

Rosen, Rochelle K.; Getz, Melissa L.; Dawson, Lauren; Guillen, Melissa; Ramirez, Jaime J.

2018-01-01

Background Effective HIV prevention requires efficient delivery of safe and efficacious drugs and optimization of user adherence. The user’s experiences with the drug, delivery system, and use parameters are critical to product acceptability and adherence. Prevention product developers have the opportunity to directly control a drug delivery system and its impact on acceptability and adherence, as well as product efficacy. Involvement of potential users during preclinical design and development can facilitate this process. We embedded a mixed methods user evaluation study into a safety and pharmacokinetics (PK) trial of a pod-intravaginal ring delivering antiretroviral agents. Methodology Women enrolled in two cohorts, ultimately evaluating the safety/PK of a pod-IVRs delivering TDF-alone, TDF-FTC, and/or TDF-FTC-MVC. A 7-day use period was targeted for each pod-IVR, regardless of drug or drug combination. During the clinical study, participants provided both quantitative (i.e., survey) and qualitative (i.e., in-depth interview) data capturing acceptability, perceptibility, and adherence behaviors. Initial sexual and reproductive health history surveys, daily diaries, a final acceptability and willingness to use survey, and a qualitative in-depth interview comprised the user evaluation data for each pod-IVR experienced by the participants. Findings Overall, the majority of participants (N = 10) reported being willing to use the pod-IVR platform for HIV prevention should it advance to market. Confidence to use the pod-IVR (e.g., insertion, removal) was high. There were no differences noted in the user experience of the pod-IVR platform; that is, whether the ring delivered TDF-alone, TDF-FTC, or TDF-FTC-MVC, users’ experiences of the ring were similar and acceptable. Participants did report specific experiences, both sensory and behavioral, that impacted their use behaviors with respect to the ring, and which could ultimately impact acceptability and adherence. These experiences, and user evaluations elicited by them, could both challenge use or be used to leverage use in future trials and product rollout once fully articulated. Conclusions High willingness-to-use data and lack of salient differences in user experiences related to use of the pod-IVR platform (regardless of agents delivered) suggests that the pod-IVR is a feasible and acceptable drug delivery device in and of itself. This finding holds promise both for an anti-HIV pod-IVR and, potentially, a multipurpose prevention pod-IVR that could deliver both prevention for sexually transmitted infections (STIs) including HIV and contraception. Given the very early clinical trial context, further acceptability, perceptibility, and adherence data should continue to be explored, in the context of longer use periods (e.g., 28-day ring use), and in the contexts of sexual activity and menses. Using early design and development contexts to gain insights into potential challenges and facilitators of drug delivery systems such as the pod-IVR could save valuable resources and time as a potential biomedical technology moves through the clinical trial pipeline and into real-world use. PMID:29758049

Coherent structures in wind shear induced wave–turbulence–vegetation interaction in water bodies

DOE PAGES

Banerjee, Tirtha; Vercauteren, Nikki; Muste, Marian; ...

2017-08-26

Flume experiments with particle imaging velocimetry (PIV) were conducted recently to study a complex flow problem where wind shear acts on the surface of a static water body in presence of flexible emergent vegetation and induces a rich dynamics of wave–turbulence–vegetation interaction inside the water body without any gravitational gradient. The experiments were aimed at mimicking realistic vegetated wetlands and the present work is targeted to improve the understanding of the coherent structures associated with this interaction by employing a combination of techniques such as quadrant analysis, proper orthogonal decomposition (POD), Shannon entropy and mutual information content (MIC). The turbulentmore » transfer of momentum is found to be dominated by organized motions such as sweeps and ejections, while the wave component of vertical momentum transport does not show any such preference. Furthermore, by reducing the data using POD we see that wave energy for large flow depths and turbulent energy for all water depths is concentrated among the top few modes, which can allow development of simple reduced order models. Vegetation flexibility is found to induce several roll type structures, however if the vegetation density is increased, drag effects dominate over flexibility and organize the flow. The interaction between waves and turbulence is also found to be highest among flexible sparse vegetation. But, rapidly evolving parts of the flow such as the air–water interface reduces wave–turbulence interaction.« less

PCR-based identification of cacao black pod causal agents and identification of biological factors possibly contributing to Phytophthora megakarya's field dominance in West Africa

USDA-ARS?s Scientific Manuscript database

Among the Phytophthora species that cause black pod of cacao, P. megakarya is the most virulent, posing a serious threat to cacao production in Africa. Correct identification of the species causing the black pod and understanding the virulence factors involved are important for developing sustainabl...

Probability of detection of defects in coatings with electronic shearography

NASA Technical Reports Server (NTRS)

Russell, S. S.; Lansing, M. D.; Horton, C. M.; Gnacek, W. J.

1995-01-01

The goal of this research was to utilize statistical methods to evaluate the probability of detection (POD) of defects in coatings using electronic shearography. The coating system utilized in the POD studies was to be the paint system currently utilized on the external casings of the NASA space transportation system reusable solid rocket motor boosters. The population of samples was to be large enough to determine the minimum defect size for 90-percent POD of 95-percent confidence POD on these coatings. Also, the best methods to excite coatings on aerospace components to induce deformations for measurement by electronic shearography were to be determined.

Body Fat Measurements in Singaporean Adults Using Four Methods

PubMed Central

Bi, Xinyan; Loo, Yi Ting

2018-01-01

Few studies have been conducted to measure body composition in Asian populations. In this study, we determined the percent body fat (PBF) by using dual-energy X-ray absorptiometry (DEXA), air-displacement plethysmography (ADP or BOD POD), bioelectrical impedance analysis (BIA) and skinfold (SKF) in 445 healthy Singaporean adults. We observed that the BOD POD, BIA and SKF estimates of PBF were highly correlated with that from DEXA (as a reference method) among Singaporean adults. However, they all underestimated PBF (differences of 3.9% for BOD POD, 5.6% for BIA and 12.5% for SKF). Our results filled a gap in the literature by testing the relationships between DEXA and BOD POD, BIA and SKF in a large sample with a wide range of body mass index (BMI) from 16.1 to 37.5 kg/m2 and age from 21 to 69.2 years. The differences of PBF measured by different methods were dependent on age, gender and ethnicity. No significant difference was observed between DEXA and BOD POD in men aged > 40 or in BMI tertile 3. However, the mean difference between DEXA and BOD POD was significant in women. Different measuring methods of estimating PBF therefore must be cautiously interpreted. PMID:29510545

Effect of urea treatment of cocoa pod on rumen fermentation characteristics in vitro

NASA Astrophysics Data System (ADS)

Anggraeni, A. S.; Herdian, H.; Sakti, A. A.; Sofyan, A.; Ekaningrum, M.

2017-12-01

Indonesia is a third largest country in the world for cocoa production. A cocoa pod could be utilized as alternative feeds due to their sufficient quantity and availability throughout the year. On the other hand, low nutritional quality such as highly fibrous materials and low protein content usually characterized in agricultural and plantation by-products as it appears on cocoa pod. Ammoniation treatment using urea improve the nutritional quality of feedstuff. The objective of this study was to evaluate the effect of ammoniation treatments on a cocoa pod on in vitro feed fermentation and gas production on ruminal fluid. KA treatment gave highest gas production than other treatment. Total gas production during 48 hours of the cocoa pod was significantly affected by treatments (P<0.05). Total volatile acid (VFA), acetate (C2), propionate (C3), butyrate (C4) total VFA and A/P ratio indicated no significant difference among treatments. KA and KD treatments have tendency effect on IVDMD than control (KS) treatment. In this study ammoniation treatment using 5% of urea had a positive and effect on the best degradability and ruminal fermentation of cocoa pod.

Black pod: diverse pathogens with a global impact on cocoa yield.

PubMed

Guest, David

2007-12-01

ABSTRACT Pathogens of the Straminipile genus Phytophthora cause significant disease losses to global cocoa production. P. megakarya causes significant pod rot and losses due to canker in West Africa, whereas P. capsici and P. citrophthora cause pod rots in Central and South America. The global and highly damaging P. palmivora attacks all parts of the cocoa tree at all stages of the growing cycle. This pathogen causes 20 to 30% pod losses through black pod rot, and kills up to 10% of trees annually through stem cankers. P. palmivora has a complex disease cycle involving several sources of primary inoculum and several modes of dissemination of secondary inoculum. This results in explosive epidemics during favorable environmental conditions. The spread of regional pathogens must be prevented by effective quarantine barriers. Resistance to all these Phytophthora species is typically low in commercial cocoa genotypes. Disease losses can be reduced through integrated management practices that include pruning and shade management, leaf mulching, regular and complete harvesting, sanitation and pod case disposal, appropriate fertilizer application and targeted fungicide use. Packaging these options to improve uptake by smallholders presents a major challenge for the industry.

The effects of practice with MP3 players on driving performance.

PubMed

Chisholm, S L; Caird, J K; Lockhart, J

2008-03-01

This study examined the effects of repeated iPod interactions on driver performance to determine if performance decrements decreased with practice. Nineteen younger drivers (mean age=19.4, range 18-22) participated in a seven session study in the University of Calgary Driving Simulator (UCDS). Drivers encountered a number of critical events on the roadways while interacting with an iPod including a pedestrian entering the roadway, a vehicle pullout, and a lead vehicle braking. Measures of hazard response, vehicle control, eye movements, and secondary task performance were analyzed. Increases in perception response time (PRT) and collisions were found while drivers were performing the difficult iPod tasks, which involved finding a specific song within the song titles menu. Over the course of the six experimental sessions, driving performance improved in all conditions. Difficult iPod interactions significantly increased the amount of visual attention directed into the vehicle above that of the baseline condition. With practice, slowed responses to driving hazards while interacting with the iPod declined somewhat, but a decrement still remained relative to the baseline condition. The multivariate results suggest that access to difficult iPod tasks while vehicles are in motion should be curtailed.

Learning a detection map for a network of unattended ground sensors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Hung D.; Koch, Mark William

2010-03-01

We have developed algorithms to automatically learn a detection map of a deployed sensor field for a virtual presence and extended defense (VPED) system without apriori knowledge of the local terrain. The VPED system is an unattended network of sensor pods, with each pod containing acoustic and seismic sensors. Each pod has the ability to detect and classify moving targets at a limited range. By using a network of pods we can form a virtual perimeter with each pod responsible for a certain section of the perimeter. The site's geography and soil conditions can affect the detection performance of themore » pods. Thus, a network in the field may not have the same performance as a network designed in the lab. To solve this problem we automatically estimate a network's detection performance as it is being installed at a site by a mobile deployment unit (MDU). The MDU will wear a GPS unit, so the system not only knows when it can detect the MDU, but also the MDU's location. In this paper, we demonstrate how to handle anisotropic sensor-configurations, geography, and soil conditions.« less

Influence of Peanut Cultivars and Environmental Conditions on the Diversity and Community Composition of Pod Rot Soil Fungi in China.

PubMed

Wang, Mian; Chen, Mingna; Yang, Zhen; Chen, Na; Chi, Xiaoyuan; Pan, Lijuan; Wang, Tong; Yu, Shanlin; Guo, Xingqi

2017-12-01

Peanut yield and quality are seriously affected by pod rot pathogens worldwide, especially in China in recent years. The goals of this study are to analyze the structure of fungal communities of peanut pod rot in soil in three peanut cultivars and the correlation of pod rot with environmental variables using 454 pyrosequencing. A total of 46,723 internal transcribed spacer high-quality sequences were obtained and grouped into 1,706 operational taxonomic units at the 97% similarity cut-off level. The coverage, rank abundance, and the Chao 1 and Shannon diversity indices of the operational taxonomic units were analyzed. Members of the phylum Ascomycota were dominant, such as Fusarium , Chaetomium , Alternaria , and Sordariomycetes , followed by Basidiomycota. The results of the heatmap and redundancy analysis revealed significant variation in the composition of the fungal community among the three cultivar samples. The environmental conditions in different peanut cultivars may also influence on the structure of the fungal community. The results of this study suggest that the causal agent of peanut pod rot may be more complex, and cultivars and environmental conditions are both important contributors to the community structure of peanut pod rot fungi.

Measures of body fat in South Asian adults.

PubMed

Kalra, S; Mercuri, M; Anand, S S

2013-05-27

South Asian people who originate from the Indian subcontinent have greater percent body fat (%BF) for the same body mass index (BMI) compared with white Caucasians. This has been implicated in their increased risk of type 2 diabetes and cardiovascular disease. There is limited information comparing different measures of body fat in this ethnic group. The objectives of this study were: (1) to investigate the correlation of %BF measured by a foot-to-foot bioelectrical impedance analysis (FF-BIA) against the BOD POD, a method of air-displacement plethysmography, and (2) to determine the correlations of simple anthropometric measures, (that is, BMI, body adiposity index (BAI), waist circumference (WC), hip circumference (HC) and waist-to-hip ratio (WHR)) against the BOD POD measure of body fat. Eighty apparently healthy South Asian men and women were recruited from the community, and measurements of height, weight, WC, HC and body composition using Tanita FF-BIA and BOD POD were taken. The mean±s.d. age of participants was 27.78±10.49 years, 42.5% were women, and the mean BMI was 22.68±3.51 kg m(-2). The mean body fat (%BF) calculated by FF-BIA and BOD POD was 21.94±7.88% and 26.20±8.47%, respectively. The %BF calculated by FF-BIA was highly correlated with the BOD POD (Pearson's r=0.83, P<0.001), however, FF-BIA underestimated %BF by 4.3%. When anthropometric measures were compared with % BF by BOD POD, the BAI showed the strongest correlation (r=0.74) and the WHR showed the weakest (r=0.33). BAI generally underestimated %BF by 2.6% in comparison with %BF by BOD POD. The correlations of BOD POD with other measures of %BF were much stronger in subjects with a BMI >21 kg m(-2) than those with a BMI 21 kg m(-2). The FF-BIA and BAI estimates of %BF are highly correlated with that of BOD POD among people of South Asian origin, although both methods somewhat underestimate % BF. Furthermore, their correlations with % BF from BOD POD are significantly weakened among men and women with a BMI 21 kg m(-2).

TerraSAR-X precise orbit determination with real-time GPS ephemerides

NASA Astrophysics Data System (ADS)

Wermuth, Martin; Hauschild, Andre; Montenbruck, Oliver; Kahle, Ralph

TerraSAR-X is a German Synthetic Aperture Radar (SAR) satellite, which was launched in June 2007 from Baikonour. Its task is to acquire radar images of the Earth's surface. In order to locate the radar data takes precisely, the satellite is equipped with a high-quality dual-frequency GPS receiver -the Integrated Geodetic and Occultation Receiver (IGOR) provided by the GeoForschungsZentrum Potsdam (GFZ). Using GPS observations from the IGOR instrument in a reduced dynamic precise orbit determination (POD), the German Space Operations Center (DLR/GSOC) is computing rapid and science orbit products on a routine basis. The rapid orbit products arrive with a latency of about one hour after data reception with an accuracy of 10-20 cm. Science orbit products are computed with a latency of five days achieving an accuracy of about 5cm (3D-RMS). For active and future Earth observation missions, the availability of near real-time precise orbit information is becoming more and more important. Other applications of near real-time orbit products include the processing of GNSS radio occulation measurements for atmospheric sounding as well as altimeter measurements of ocean surface heights, which are nowadays employed in global weather and ocean circulation models with short latencies. For example after natural disasters it is necessary to evaluate the damage by satellite images as soon as possible. The latency and quality of POD results is mainly driven by the availability of precise GPS ephemerides. In order to have high-quality GPS ephemerides available at real-time, GSOC has developed the real-time clock estimation system RETICLE. The system receives NTRIP-data streams with GNSS observations from the global tracking network of IGS in real-time. Using the known station position, RETICLE estimates precise GPS satellite clock offsets and drifts based on the most recent available IGU predicted orbits. The clock offset estimates have an accuracy of better than 0.3 ns and are globally valid. The latency of the estimated clocks is approximately 7 seconds. Another limiting factor is the frequency of satellite downlinks and the latency of the data transfer from the ground station to the computation center. Therefore a near real-time scenario is examined in which the satellite has about one ground station contact per orbit or respectively one contact in 90 minutes. The results of the near real-time POD are evaluated in an internal consistency check and compared against the science orbit solution and laser ranging observations.

Gastroprotective effects of combination of hot water extracts of turmeric (Curcuma domestica L.), cardamom pods (Ammomum compactum S.) and sembung leaf (Blumea balsamifera DC.) against aspirin-induced gastric ulcer model in rats

PubMed Central

Mutmainah; Susilowati, Rina; Rahmawati, Nuning; Nugroho, Agung Endro

2014-01-01

Objective To investigate the protective effect of the combination of turmeric (Curcuma domestica), cardamom pods (Amomum compactum) and sembung leaf (Blumea balsamifera) on gastric mucosa in aspirin-induced gastric ulcer model rats. Methods Thirty male Wistar rats weighing 150-200 g were divided into 6 groups. Four groups were administered with the hot water extracts combination consisted of cardamom pods 36.6 mg/200 g body weight and sembung leaf 91.5 mg/200 g body weight (fixed doses). The herbal extracts combination were also consisted of turmeric in various doses i.e. 10 mg/200 g body weight in the second group, 30 mg/200 g body weight in the first and third groups, and 50 mg/200 g body weight in the fourth group. The fifth group rats received sucralfate 72 mg /200 g body weight. Ten minutes after receiving herbal extracts combinations or sucralfate, the rats were induced with aspirin 90 mg/200 g body weight except the first group. Another group (sixth group) only received aspirin without any protective agent. All treatments were adsministered orally for seven days. The number and area of the gastric ulcers were counted and measured macroscopically. Score of mucosal damage and the number of eosinophils as well as the number of mast cells were observed in paraffin sections stained with hematoxylin eosin and toluidine blue, respectively. Results The groups receiving herbal infuse combination exhibited less number and smaller area of gastric ulcers as well as smaller score of mucosal damage in comparison to those of aspirin group (P<0.05). The number of mast cells and eosinophil of herbal groups were also smaller than that of aspirin group. Conclusions The herbal extracts combination of turmeric (Curcuma domestica), cardamom pods (Amomum compactum) and sembung leaf (Blumea balsamifera) has potential gastroprotective effects. PMID:25183139

Gastroprotective effects of combination of hot water extracts of turmeric (Curcuma domestica L.), cardamom pods (Ammomum compactum S.) and sembung leaf (Blumea balsamifera DC.) against aspirin-induced gastric ulcer model in rats.

PubMed

Mutmainah; Susilowati, Rina; Rahmawati, Nuning; Nugroho, Agung Endro

2014-05-01

To investigate the protective effect of the combination of turmeric (Curcuma domestica), cardamom pods (Amomum compactum) and sembung leaf (Blumea balsamifera) on gastric mucosa in aspirin-induced gastric ulcer model rats. Thirty male Wistar rats weighing 150-200 g were divided into 6 groups. Four groups were administered with the hot water extracts combination consisted of cardamom pods 36.6 mg/200 g body weight and sembung leaf 91.5 mg/200 g body weight (fixed doses). The herbal extracts combination were also consisted of turmeric in various doses i.e. 10 mg/200 g body weight in the second group, 30 mg/200 g body weight in the first and third groups, and 50 mg/200 g body weight in the fourth group. The fifth group rats received sucralfate 72 mg /200 g body weight. Ten minutes after receiving herbal extracts combinations or sucralfate, the rats were induced with aspirin 90 mg/200 g body weight except the first group. Another group (sixth group) only received aspirin without any protective agent. All treatments were adsministered orally for seven days. The number and area of the gastric ulcers were counted and measured macroscopically. Score of mucosal damage and the number of eosinophils as well as the number of mast cells were observed in paraffin sections stained with hematoxylin eosin and toluidine blue, respectively. The groups receiving herbal infuse combination exhibited less number and smaller area of gastric ulcers as well as smaller score of mucosal damage in comparison to those of aspirin group (P<0.05). The number of mast cells and eosinophil of herbal groups were also smaller than that of aspirin group. The herbal extracts combination of turmeric (Curcuma domestica), cardamom pods (Amomum compactum) and sembung leaf (Blumea balsamifera) has potential gastroprotective effects.

Population, mortality and place of death in Germany (1950-2050) - implications for end-of-life care in the future.

PubMed

Simon, S T; Gomes, B; Koeskeroglu, P; Higginson, I J; Bausewein, C

2012-11-01

European populations are ageing, but data on the associated end-of-life care needs are scarce. This study aimed to analyse population, mortality and place of death (PoD) trends in Germany since 1950, and to project mortality by PoD until 2050. Secondary analysis of national statistics on population, mortality and PoD by age and gender. Future numbers and proportions of deaths by PoD - hospital deaths (HDs) and non-hospital deaths (NHDs) - were based on recent trends (2005-2009). Linear models accounted for the effect of age and gender. The German population increased by 19.0% between 1950 and 2002, and has remained relatively stable ever since. However, it is expected that it will decrease (15.4%) from 2009 to 2050 (from 81.8 to 69.4 million). The annual number of deaths has shown an increasing trend, except for a decrease in 1975-2004. A 26.0% increase is expected from 2009 to 2050 (854,544 to 1,077,000 deaths). Older people (age ≥ 75 years) will account for 87.8% of all deaths in 2050 (64.4% in 2009). The proportion of HDs was stable, with an annual mean of 47.0% (range 44.9-47.8%). The models estimated that most people will continue to die outside of hospital in 2050 (48.6 or 54.1%), and absolute numbers of both HDs and NHDs will increase from 2009 to 2050 [HD: by 20.1 million (30.6%); NHD: by 35.5 million (17.0%)]. Unlike in other industrialized countries, most people in Germany die outside of hospital. The need to plan for growing end-of-life care needs and ageing is urgent in Germany but also applies to the rest of Europe. A joint European policy must inform national strategies. Copyright © 2012 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Shuttle Systems 3-D Applications: Application of 3-D Graphics in Engineering Training for Shuttle Ground Processing

NASA Technical Reports Server (NTRS)

Godfrey, Gary S.

2003-01-01

This project illustrates an animation of the orbiter mate to the external tank, an animation of the OMS POD installation to the orbiter, and a simulation of the landing gear mechanism at the Kennedy Space Center. A detailed storyboard was created to reflect each animation or simulation. Solid models were collected and translated into Pro/Engineer's prt and asm formats. These solid models included computer files of the: orbiter, external tank, solid rocket booster, mobile launch platform, transporter, vehicle assembly building, OMS POD fixture, and landing gear. A depository of the above solid models was established. These solid models were translated into several formats. This depository contained the following files: stl for sterolithography, stp for neutral file work, shrinkwrap for compression, tiff for photoshop work, jpeg for Internet use, and prt and asm for Pro/Engineer use. Solid models were created of the material handling sling, bay 3 platforms, and orbiter contact points. Animations were developed using mechanisms to reflect each storyboard. Every effort was made to build all models technically correct for engineering use. The result was an animated routine that could be used by NASA for training material handlers and uncovering engineering safety issues.

Results of a prospective randomized controlled trial of early ambulation for patients with lower extremity autografts.

PubMed

Lorello, David John; Peck, Michael; Albrecht, Marlene; Richey, Karen J; Pressman, Melissa A

2014-01-01

It is common practice to keep those patients with lower extremity autografts immobile until post-operative day (POD) 5. There is however inherent risks associated with even short periods of immobility. As of now there are no randomized controlled trials looking at early ambulation of patients with lower extremity autografts in the burn community.The objective of this study was to show that patients who begin ambulation within 24 hours of lower extremity autografting will have no increased risk of graft failure than those patients who remain immobile until POD 5. Thirty-one subjects who received autografts to the lower extremity were randomized after surgery into either the early ambulation group (EAG;17 subjects) or the standard treatment group (STG;14 subjects). Those subjects randomized to the EAG began ambulating with physical therapy on POD 1. Subjects in the STG maintained bed rest until POD 5. There was no difference in the number of patients with graft loss in either the EAG or STG on POD 5, and during any of the follow-up visits. No subjects required regrafting. There was a significant difference in the mean minutes of ambulation, with the EAG ambulating longer than the STG (EAG 23.4 minutes [SD 12.03], STG 14.1 [SD 9.00], P=.0235) on POD 5. Burn patients with lower extremity autografts can safely ambulate on POD 1 without fear of graft failure compared with those patients that remain on bed rest for 5 days.

Plasma chitinase 3-like 1 is persistently elevated during first month after minimally invasive colorectal cancer resection.

PubMed

Shantha Kumara, H M C; Gaita, David; Miyagaki, Hiromichi; Yan, Xiaohong; Hearth, Sonali Ac; Njoh, Linda; Cekic, Vesna; Whelan, Richard L

2016-08-15

To assess blood chitinase 3-like 1 (CHi3L1) levels for 2 mo after minimally invasive colorectal resection (MICR) for colorectal cancer (CRC). CRC patients in an Institutional Review Board approved data/plasma bank who underwent elective MICR for whom preoperative (PreOp), early postoperative (PostOp), and 1 or more late PostOp samples [postoperative day (POD) 7-27] available were included. Plasma CHi3L1 levels (ng/mL) were determined in duplicate by enzyme linked immunosorbent assay. PreOp and PostOp plasma sample were available for 80 MICR cancer patients for the study. The median PreOp CHi3L1 level was 56.8 CI: 41.9-78.6 ng/mL (n = 80). Significantly elevated (P < 0.001) median plasma levels (ng/mL) over PreOp levels were detected on POD1 (667.7 CI: 495.7, 771.7; n = 79), POD 3 (132.6 CI: 95.5, 173.7; n = 76), POD7-13 (96.4 CI: 67.7, 136.9; n = 62), POD14-20 (101.4 CI: 80.7, 287.4; n = 22), and POD 21-27 (98.1 CI: 66.8, 137.4; n = 20, P = 0.001). No significant difference in plasma levels were noted on POD27-41. Plasma CHi3L1 levels were significantly elevated for one month after MICR. Persistently elevated plasma CHi3L1 may support the growth of residual tumor and metastasis.

Proximal Occlusion of Medium-Sized Vessels with the Penumbra Occlusion Device: A Study of Safety and Efficacy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jambon, E.; Petitpierre, F.; Brizzi, V.

PurposeTo retrospectively investigate the safety and efficacy of hybrid proximal coiling of various medium-sized vessels (4 to 8 mm) using the Penumbra Occlusion Device (POD).Materials and MethodsFrom October 2014 to February 2016, 37 proximal embolizations were performed with PODs in 36 patients (mean age: 50.8, range: 10–86; 29 male, 7 female). Vessel occlusions were achieved under fluoroscopic guidance using a 2.7 French microcatheter. Among the 36 vessels targeted, 16 were splenic arteries, 11 renal arteries, 4 mesenteric arteries, 3 arteriovenous fistulae, 1 iliac artery, and 1 gonadal vein. Intermittent follow-up angiography was performed to assess the flow for final occlusion. Outcomesmore » and complications were assessed by clinical and/or imaging follow-up.ResultsTo produce proximal occlusion of the intended vessels, the POD was used alone in 19 embolizations (51.4 %). In 12 procedures (32.4 %), POD was used as a coil constrainer to secure the coil construct. In 6 procedures (16.2 %), additional embolic devices were used to achieve vessel occlusion after initial POD deployment. After a mean follow-up of 3.2 months, no POD migration was observed but two complications occurred (5.4 %): one post embolic syndrome and one extensive infarction with splenic abscess.ConclusionThe POD system allows safe and effective proximal embolization of medium-sized vessels in a variety of clinical settings.« less

MyPOD: an EMR-Based Tool that Facilitates Quality Improvement and Maintenance of Certification.

PubMed

Berman, Loren; Duffy, Brian; Randall Brenn, B; Vinocur, Charles

2017-03-01

Maintenance of Certification (MOC) was designed to assess physician competencies including operative case volume and outcomes. This information, if collected consistently and systematically, can be used to facilitate quality improvement. Information automatically extracted from the electronic medical record (EMR) can be used as a prompt to compile these data. We developed an EMR-based program called MyPOD (My Personal Outcomes Data) to track surgical outcomes at our institution. We compared occurrences reported in the first 18 months to those captured in the American College of Surgeons National Surgical Quality Improvement Program-Pediatric (ACS NSQIP-P) over the same time period. During the first 18 months of using MyPOD, 691 cases were captured in both MyPOD and NSQIP-P. There were 48 cases with occurrences in NSQIP-P (6.9% occurrence rate). MyPOD captured 33% of the occurrences and 83% of the deaths reported in NSQIP-P. Use of the MyPOD program helped to identify series of complications and facilitated systematic change to improve outcomes. MyPOD provides comparative data that is essential in performance evaluation and facilitates quality improvement in surgery. This program and similar EMR-driven tools are becoming essential components of the MOC process. Our initial review has revealed opportunities for improvement in self-reporting which we can continue to measure by comparison to NSQIP-P. In addition, it has identified systems issues that have led to hospital-wide improvements.

The steroidal Na+/K+ ATPase inhibitor 3-[(R)-3-pyrrolidinyl]oxime derivative (3-R-POD) induces potent pro-apoptotic responses in colonic tumor cells.

PubMed

Alkahtani, Saad Hussin

2014-06-01

Recently, potent anticancer actions of the steroidal Na(+)/K(+) ATPase inhibitor 3-[(R)-3-pyrrolidinyl]oxime derivative 3 (3-R-POD) have been reported for multiple cell lines, including prostate and lung cancer cells. In the present study, the anticancer action of 3-R-POD was addressed in colonic tumor cells. Treatment of Caco2 colonic tumor cells with increasing concentrations of 3-R-POD induced potent, dose-dependent inhibition of cell growth as measured by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. In addition, the APOpercentage apoptosis assay revealed significant pro-apoptotic responses, suggesting that the anticancer activity of this steroidal Na(+)/K(+) ATPase inhibitor in colonic tumors takes places mainly through the induction of strong pro-apoptotic effects. Focussing on the molecular mechanism that may regulate these interactions, 3-R-POD was shown to induce significant early actin re-organization and late Protein Kinase B (AKT) de-phosphorylation. Finally, the 3-R-POD-induced inhibition of cell growth and early actin reorganization in colonic cancer cells remained unchanged when cells were pre-treated with pertussis toxin, thus excluding possible interactions of this inhibitor with G-coupled receptors. These results indicate that 3-R-POD induces potent pro-apoptotic responses in colonic tumor cells governed by actin re-organization and inhibition of AKT pro-survival signaling. Copyright© 2014 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

[Enzymatic characteristics of peroxidase from Chrysanthemum morifolium cv. Bo-ju].

PubMed

Zhu, Yu-Yun; Lyu, Xin-Lin; Li, Xiang-Wei; Zhang, Dong; Dong, Li-Hua; Zhu, Jing-Jing; Wang, Zhi-Min; Zhang, Jin-Zhen

2018-04-01

The enzymatic browning is one of the main reasons for affecting the quality of medicinal flowers. In the process of chrysanthemum harvesting and processing, improper treatment will lead to the browning and severely impact the appearance and quality of chrysanthemum. Peroxidase enzyme is one of the oxidoreductases that cause enzymatic browning of fresh chrysanthemum. The enzymatic characteristics of peroxidase (POD) in chrysanthemum were studied in this paper. In this experiment, the effects of different reaction substrates and their concentrations, PH value of buffer and reaction temperatures on the activity of POD enzyme were investigated. The results showed that the optimal substrate of POD was guaiacol, and the optimal concentration of POD was 50 mmol·L⁻¹. The optimal pH value and reaction temperature were 4.4 and 30-35 °C, respectively. Michaelis-Menten equation was obtained to express the kinetics of enzyme-catalyzed reaction of POD, Km=0.193 mol·L⁻¹, Vmax=0.329 D·min⁻¹. In addition, the results of POD enzyme thermal stability test showed that the POD enzyme activity was inhibited when being treated at 80 °C for 4 min or at 100 °C for 2 min. The above results were of practical significance to reveal the enzymatic browning mechanism, control the enzymatic browning and improve the quality of chrysanthemum, and can also provide the basis for the harvesting and processing of medicinal materials containing polyphenols. Copyright© by the Chinese Pharmaceutical Association.

iPod touch-assisted instrumentation of the spine: a technical report.

PubMed

Jost, Gregory F; Bisson, Erica F; Schmidt, Meic H

2013-12-01

Instrumentation of the spine depends on choosing the correct insertion angles to implant screws. Although modern image guidance facilitates precise instrumentation of the spine, the equipment is costly and availability is limited. Although most surgeons use lateral fluoroscopy to guide instrumentation in the sagittal plane, the lateromedial angulation is often chosen by estimation. To overcome the associated uncertainty, iPod touch-based applications for measuring angles can be used to assist with screw implantation. To evaluate the use of the iPod touch to adjust instruments to the optimal axial insertion angle for placement of pedicle screws in the lumbar spine. Twenty lumbar pedicle screws in 5 consecutive patients were implanted using the iPod touch. The lateromedial angulation was measured on preoperative images and reproduced in the operative field with the iPod touch. The instruments to implant the screws were aligned with the side of the iPod for screw insertion. Actual screw angles were remeasured on postoperative imaging. We collected demographic, clinical, and operative data for each patient. In 16 of 20 screws, the accuracy of implantation was within 3 degrees of the ideal trajectory. The 4 screws with an angle mismatch of 7 to 13 degrees were all implanted at the caudal end of the exposure, where maintaining the planned angulation was impeded by strong muscles pushing medially. iPod touch-assisted instrumentation of the spine is a very simple technique, which, in combination with a lateral fluoroscopy, may guide placement of pedicle screws in the lumbar spine.

Apex-to-Cupola Distance Following VATS Predicts Recurrence in Patients With Primary Spontaneous Pneumothorax

PubMed Central

Chang, Jia-Ming; Lai, Wu-Wei; Yen, Yi-Ting; Tseng, Yau-Lin; Chen, Ying-Yuan; Wu, Ming-Ho; Chen, Wei; Light, Richard W.

2015-01-01

Abstract Our study sought to determine whether the size of the residual apical pleural space in young patients with primary spontaneous pneumothorax (PSP) following video-assisted thoracoscopic surgery is associated with the risk of recurrence. We retrospectively reviewed patients (≤30 years’ old) with primary spontaneous pneumothorax following thoracoscopic surgery (2002–2010) in a university-affiliated hospital. The size of residual apical pleural space was estimated by measuring the apex-to-cupola distance on a postoperative chest radiograph at 2 time windows: first between postoperative day (POD) 0 and 3, and second between POD 4 and 14. A total of 149 patients were enrolled with a median follow-up of 11.2 months (interquartile range, 0.95–29.5 months), of whom 141 (94.6%) were male with a mean age of 20 years. The postoperative recurrence rate was 11.4%. Comparing the characteristics between the patients with and without recurrent pneumothorax, the patients with recurrence were younger (18.2 + 2.4 vs 20.7 + 3.7 years, P = 0.008), with a lower rate of pleurodesis (35% vs1 69%, P = 0.037), longer apex-to-cupola distance at POD 0 to 3 (22.41 ± 19.56 vs 10.07 ± 10.83 mm, P < 0.001) and POD 4 to 14 (11.82 ± 9.75 vs 5.54 ± 8.38 mm, P = 0.005) than the patients without recurrence. In a multivariate logistic regression model for recurrent pneumothorax, age <18 years (P = 0.026, odds ratio [OR]: 4.694), apex-to-cupola distance at POD 0 to 3 >10 mm (P = 0.027, OR: 5.319), and no pleurodesis during VATS (P = 0.022, OR: 5.042) were independent risk factors for recurrent pneumothorax. The recurrence rate was not low (11.4%) in young patients with PSP following VATS. Residual apical pleural space with apex-to-cupola distance of 10 mm or greater at POD 0 to 3, younger age, and no pleurodesis would increase postoperative recurrence of primary spontaneous pneumothorax. PMID:26376396

Coherent and turbulent process analysis of the effects of a longitudinal vortex on boundary layer detachment on a NACA0015 foil

NASA Astrophysics Data System (ADS)

Prothin, Sebastien; Djeridi, Henda; Billard, Jean-Yves

2014-05-01

In this paper, the influence of a single tip vortex on boundary layer detachment is studied. This study offers a preliminary approach in order to better understand the interaction between a propeller hub vortex and the rudder installed in its wake. This configuration belongs to the field of marine propulsion and encompasses such specific problem as cavitation inception, modification of propulsive performances and induced vibrations. To better understand the complex mechanisms due to propeller-rudder interactions it was decided to emphasize configurations where the hub vortex is generated by an elliptical 3-D foil and is located upstream of a 2-D NACA0015 foil at high incidences for a Reynolds number of 5×105. The physical mechanisms were studied using Time Resolved Stereoscopic Particle Image Velocimetry (TR-SPIV) techniques. Particular attention was paid to the detachment at 25° incidence and a detailed cartography of the mean and turbulent properties of the wake is presented. Proper Orthogonal Decomposition (POD) analysis was applied in order to highlight the unsteady nature of the flow using phase averaging based on the first POD coefficients to characterize the turbulent and coherent process in the near wake of the rudder.

Achieving and Validating the 1-centimeter Orbit: JASON-1 Precision Orbit Determination Using GPS, SLR, DORIS and Altimeter data

NASA Technical Reports Server (NTRS)

Luthcke, Scott B.; Zelensky, Nikita P.; Rowlands, David D.; Lemoine, Frank G.; Williams, Teresa A.

2003-01-01

Jason-1, launched on December 7, 2001, is continuing the time series of centimeter level ocean topography observations as the follow-on to the highly successful TOPEX/POSEIDON (T/P) radar altimeter satellite. The precision orbit determination (POD) is a critical component to meeting the ocean topography goals of the mission. Jason-1 is no exception and has set a 1 cm radial orbit accuracy goal, which represents a factor of two improvement over what is currently being achieved for T/P. The challenge to precision orbit determination (POD) is both achieving the 1 cm radial orbit accuracy and evaluating and validating the performance of the 1 cm orbit. Fortunately, Jason-1 POD can rely on four independent tracking data types including near continuous tracking data from the dual frequency codeless BlackJack GPS receiver. In addition, to the enhanced GPS receiver, Jason-1 carries significantly improved SLR and DORIS tracking systems along with the altimeter itself. We demonstrate the 1 cm radial orbit accuracy goal has been achieved using GPS data alone in a reduced dynamic solution. It is also shown that adding SLR data to the GPS-based solutions improves the orbits even further. In order to assess the performance of these orbits it is necessary to process all of the available tracking data (GPS, SLR, DORIS and altimeter crossover differences) as either dependent or independent of the orbit solutions. It was also necessary to compute orbit solutions using various combinations of the four available tracking data in order to independently assess the orbit performance. Towards this end, we have greatly improved orbits determined solely from SLR+DORIS data by applying the reduced dynamic solution strategy. In addition, we have computed reduced dynamic orbits based on SLR, DORIS and crossover data that are a significant improvement over the SLR and DORIS based dynamic solutions. These solutions provide the best performing orbits for independent validation of the GPS-based reduced dynamic orbits.

Exercising with an iPod, Friend, or Neither: Which Is Better for Psychological Benefits?

ERIC Educational Resources Information Center

Plante, Thomas G.; Gustafson, Carissa; Brecht, Carrie; Imberi, Jenny; Sanchez, Jacqueline

2011-01-01

Objective: To examine the role of music and social contact on exercise benefits. Methods: Two hundred twenty-nine (n229) students were randomly assigned to one of 6 conditions: biking alone with iPod or friend in a laboratory, walking alone with iPod or friend outdoors, or biking or walking alone in control conditions. All participants completed…

Phytophthora megakarya and P. palmivora, closely related causal agents of cacao black pod induce similar reactions when infecting pods of a susceptible cacao genotype

USDA-ARS?s Scientific Manuscript database

Phytophthora megakarya (Pmeg) and Phytophthora palmivora (Ppal) cause black pod rot of Theobroma cacao. Of these two clade 4 species; Pmeg is more virulent and is displacing Ppal on cacao in many cacao production areas in Africa. To understand the advantages Pmeg has over Ppal, we compared symptom...

Trend Alert: A History Teacher's Guide to Using Podcasts in the Classroom

ERIC Educational Resources Information Center

Swan, Kathleen Owings; Hofer, Mark

2009-01-01

A "podcast" (an amalgam of the word broadcast and the iPod digital audio player) is essentially a broadcast of digital audio files on the web that users can listen to on their computer or digital audio player (e.g., iPod). Podcasts can be automatically delivered to an iPod or computer whenever new content is available. This unique feature of…

Tracking POD's Engagement with Diversity: A Content Analysis of "To Improve the Academy" and POD Network Conference Programs from 1977 to 2011

ERIC Educational Resources Information Center

Grooters, Stacy E.

2014-01-01

This study examines the degree to which sessions from the annual Professional and Organizational Development (POD) Network Conference and articles from "To Improve the Academy" engage questions of diversity. The titles and abstracts of 3,946 conference sessions and 560 journal articles were coded for presence and type of diversity. A…

78 FR 69285 - Importation of Fresh Beans, Shelled or in Pods, From Jordan Into the Continental United States

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-19

.... APHIS-2012-0042] RIN 0579-AD69 Importation of Fresh Beans, Shelled or in Pods, From Jordan Into the... shipments of fresh beans, shelled or in pods (French, green, snap, and string), from Jordan into the continental United States. As a condition of entry, the beans must be produced in accordance with a systems...

Genome and secretome analysis of the hemibiotrophic fungal pathogen, Moniliophthora roreri, which causes frosty pod rot disease of cacao: mechanisms of the biotrophic and necrotrophic phases

USDA-ARS?s Scientific Manuscript database

Background: Moniliophthora roreri is the causal agent of Frosty pod rot (FPR) disease of Theobroma cacao, the source of chocolate and is one of the most destructive diseases of cacao in the Americas. This Basidiomycete only infects cacao pods and has an extended biotrophic phase lasting up to sixty ...

A review of flavor, aroma and color enhancement in gluten free and conventional pastries, waffles and dairy desserts with mesquite pod mesocarp flour (abstract)

USDA-ARS?s Scientific Manuscript database

Mesquite is a nitrogen fixing tree whose pods were a major food for indigenous desert peoples. The main mesquite flour of commerce is milled from the pod mesocarp (without seeds) and contains 45% sucrose, 25% dietary fiber, 8 % protein, and 2 % fat. The limiting amino acids are methionine and cystei...

Population dynamics of epiphytic mycoparasites of the genera Clonostachys and Fusarium for the biocontrol of black pod (Phytophthora palmivora) and moniliasis (Moniliophthora roreri) on cocoa (Theobroma cacao).

PubMed

Hoopen, G Martijn ten; Rees, Robert; Aisa, Philo; Stirrup, Tim; Krauss, Ulrike

2003-05-01

Mycoparasites collected from aerial parts of the cocoa plant (Theobroma cacao) have shown great promise in the control of black pod, caused by Phytophthora palmivora, and moniliasis, caused by Moniliophthora roreri. However, the ecology of epiphytic mycoparasites is still poorly understood although it has a direct bearing on applied biocontrol practices, ranging from the identification and isolation of promising biocontrol candidates to formulation needs and required application frequency. One objective of this study was to determine the natural abundance of mycoparasites on cocoa flowers and pods in relation to crop development stage and cultivar. For this purpose, native mycoparasites were detected on cocoa flowers and pods using the precolonised plate baiting technique. Furthermore, the survival of an applied Clonostachys rosea isolate on cocoa pods on shaded and non-shaded trees was compared as well as the recolonisation patterns of surface-sterilised pods by native mycoparasites under these conditions. Clonostachys spp. were the most commonly isolated native mycoparasites, followed by Fusarium spp. No differences in the occurrence of native, epiphytic mycoparasites were observed between the three main cocoa cultivars, 'Criollo', 'Forastero' and 'Trinitario', nor between clones within these groups. Thus, a single biocontrol inoculum can be suitable for application to cultivar mixtures of cocoa commonly grown together in a field. Different susceptibility classes of segregating F1 populations of hybrids with resistance against M. roreri and P. palmivora supported similar population levels and taxonomic assemblages of mycoparasites. Therefore, we reject the hypothesis that these antagonists mediate resistance. Mycoparasite abundance and genetic disease resistance to black pod and moniliasis are independent phenomena and should lead to additive effects if employed simultaneously in an integrated disease management programme. The survival of applied C. rosea was not affected by the shading regime or any other meteorological parameter measured. On the other hand, recolonisation of surface-sterilised cocoa pods by most native mycoparasites was faster in the shade. Only Trichoderma spp. colonised pods exposed to direct sunlight faster than shaded ones. The implications for the design of biocontrol inocula and formulation technology are discussed.

Electromagnetic interference with pacemakers caused by portable media players.

PubMed

Thaker, Jay P; Patel, Mehul B; Jongnarangsin, Krit; Liepa, Valdis V; Thakur, Ranjan K

2008-04-01

Electromagnetic fields generated by electrical devices may cause interference with permanent pacemakers. Media players are becoming a common mode of portable entertainment. The most common media players used worldwide are iPods. These devices are often carried in a shirt chest pocket, which may place the devices close to an implanted pacemaker. The purpose of this study was to determine if iPods cause interference with pacemakers. In this prospective, single-blinded study, 100 patients who had cardiac pacemakers were tested with four types of iPods to assess for interference. Patients were monitored by a single-channel ECG monitor as well as the respective pacemaker programmer via the telemetry wand. iPods were tested by placing them 2 inches anterior to the pacemaker and wand for up to 10 seconds. To simulate actual use, standard-issue headphones were plugged into the iPods. To maintain consistency, the volume was turned up maximally, and the equalizer was turned off. A subset of 25 patients underwent testing on 2 separate days to assess for reproducibility of interference. Pacemaker interference was categorized as type I or type II telemetry interference. Type I interference was associated with atrial and/or ventricular high rates on rate histograms. Type II interference did not affect pacemaker rate counters. Electromagnetic emissions from the four iPods also were evaluated in a Faraday cage to determine the mechanism of the observed interference. One hundred patients (63 men and 37 women; mean age 77.1 +/- 7.6 years) with 11 single-chamber pacemakers and 89 dual-chamber pacemakers underwent 800 tests. The incidence of any type of interference was 51% of patients and 20% of tests. Type I interference was seen in 19% of patients and type II in 32% of patients. Reproducibility testing confirmed that interference occurred regardless of pacing configuration (unipolar or bipolar), pacing mode (AAI, VVI, or DDD), and from one day to the next. Electromagnetic emissions testing from the iPods demonstrated maximum emissions in the pacemaker carrier frequency range when the iPod was turned "on" with the headphones attached. iPods placed within 2 inches of implanted pacemakers monitored via the telemetry wand can cause interference with pacemakers.

Development of a Localized Low-Dimensional Approach to Turbulence Simulation

NASA Astrophysics Data System (ADS)

Juttijudata, Vejapong; Rempfer, Dietmar; Lumley, John

2000-11-01

Our previous study has shown that the localized low-dimensional model derived from a projection of Navier-Stokes equations onto a set of one-dimensional scalar POD modes, with boundary conditions at y^+=40, can predict wall turbulence accurately for short times while failing to give a stable long-term solution. The structures obtained from the model and later studies suggest our boundary conditions from DNS are not consistent with the solution from the localized model resulting in an injection of energy at the top boundary. In the current study, we develop low-dimensional models using one-dimensional scalar POD modes derived from an explicitly filtered DNS. This model problem has exact no-slip boundary conditions at both walls while the locality of the wall layer is still retained. Furthermore, the interaction between wall and core region is attenuated via an explicit filter which allows us to investigate the quality of the model without requiring complicated modeling of the top boundary conditions. The full-channel model gives reasonable wall turbulence structures as well as long-term turbulent statistics while still having difficulty with the prediction of the mean velocity profile farther from the wall. We also consider a localized model with modified boundary conditions in the last part of our study.

Simulation of multivariate stationary stochastic processes using dimension-reduction representation methods

NASA Astrophysics Data System (ADS)

Liu, Zhangjun; Liu, Zenghui; Peng, Yongbo

2018-03-01

In view of the Fourier-Stieltjes integral formula of multivariate stationary stochastic processes, a unified formulation accommodating spectral representation method (SRM) and proper orthogonal decomposition (POD) is deduced. By introducing random functions as constraints correlating the orthogonal random variables involved in the unified formulation, the dimension-reduction spectral representation method (DR-SRM) and the dimension-reduction proper orthogonal decomposition (DR-POD) are addressed. The proposed schemes are capable of representing the multivariate stationary stochastic process with a few elementary random variables, bypassing the challenges of high-dimensional random variables inherent in the conventional Monte Carlo methods. In order to accelerate the numerical simulation, the technique of Fast Fourier Transform (FFT) is integrated with the proposed schemes. For illustrative purposes, the simulation of horizontal wind velocity field along the deck of a large-span bridge is proceeded using the proposed methods containing 2 and 3 elementary random variables. Numerical simulation reveals the usefulness of the dimension-reduction representation methods.

Feasibility study for long lifetime helium dewar

NASA Technical Reports Server (NTRS)

Parmley, R. T.

1981-01-01

A feasible concept for a launchable three year lifetime helium dewar was investigted. Current helium dewar designs were examined to see where the largest potential reductions in parasitic heat loads can be made. The study was also devoted to examining support concepts. The support concept chosen, a passive orbital disconnect strut (PODS), has an orbital support conductance that is lower by more than an order of magnitude over current tension band supports. This lower support conductance cuts the total dewar weight in half for the same three year life time requirements. Effort was also concentrated on efficient wire feed through designs and vapor cooling of the multilayer insulation, supports, wire feed throughs and plumbing penetrations. A single stage helium dewar vs. dual stage dewars with a guard cryogen of nitrogen or neon was examined. The single stage dewar concept was selected. Different support concepts were analyzed from which the PODS support concepts was chosen. A preliminary design of the dewar was thermally and structurally analyzed and laid out including system weights, thermal performance and performance sensitivities.

NASA DOEPOD NDE Capabilities Data Book

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2015-01-01

This data book contains the Directed Design of Experiments for Validating Probability of Detection (POD) Capability of NDE Systems (DOEPOD) analyses of the nondestructive inspection data presented in the NTIAC, Nondestructive Evaluation (NDE) Capabilities Data Book. DOEPOD is designed as a decision support system to validate inspection system, personnel, and protocol demonstrating 0.90 POD with 95% confidence at critical flaw sizes, a90/95. Although 0.90 POD with 95% confidence at critical flaw sizes is often stated as an inspection requirement in inspection documents, including NASA Standards, NASA critical aerospace applications have historically only accepted 0.978 POD or better with a 95% one-sided lower confidence bound exceeding 0.90 at critical flaw sizes, a90/95.

The Rodent Eye as a Non-Invasive Window for Understanding Cancer Nanotherapeutics

Cancer.gov

This project uses the mouse eye as a non-surgical window for highly efficient, optical investigation of all aspects of syngeneic or xenograft models, using a state-of-the-art ocular imaging facility, the "EyePod."

The critical period of weed control in soybean (Glycine max (L.) Merr.) in north of Iran conditions.

PubMed

Keramati, Sara; Pirdashti, Hemmatollah; Esmaili, Mohammad Ali; Abbasian, Arastoo; Habibi, Marjaneh

2008-02-01

A field study was conducted in 2006 at Sari Agricultural and Natural Resources University, in order to determine the best time for weed control in soybean promising line, 033. Experiment was arranged in randomized complete block design with 4 replications and two series of treatments. In the first series, weeds were kept in place until crop reached V2 (second trifoliolate), V4 (fourth trifoliolate), V6 (sixth trifoliolate), R1 (beginning bloom, first flower), R3 (beginning pod), R5 (beginning seed) and were then removed and the crop kept weed-free for the rest of the season. In the second series, crops were kept weed-free until the above growth stages after which weeds were allowed to grow in the plots for the rest of the season. Whole season weedy and weed-free plots were included in the experiment for yield comparison. The results showed that among studied traits, grain yield, pod numbers per plant and weed biomass were affected significantly by control and interference treatments. The highest number of pods per plant was obtained from plots which kept weed-free for whole season control. Results showed that weed control should be carried out between V2 (26 day after planting) to R1 (63 day after planting) stages of soybean to provide maximum grain yield. Thus, it is possible to optimize the timing of weed control, which can serve to reduce the costs and side effects of intensive chemical weed control.

Evaluation of vegetable-faba bean (Vicia faba L.) intercropping under Latvian agro-ecological conditions.

PubMed

Lepse, Līga; Dane, Sandra; Zeipiņa, Solvita; Domínguez-Perles, Raul; Rosa, Eduardo As

2017-10-01

Monoculture is used mostly in conventional agriculture, where a single crop is cultivated on the same land for a period of at least 12 months. In an organic and integrated growing approach, more attention is paid to plant-environment interactions and, as a result, diverse growing systems applying intercropping, catch crops, and green manure are being implemented. Thus, field experiments for evaluation of vegetable/faba bean full intercropping efficiency, in terms of vegetable and faba bean yield and protein content, were set up during two consecutive growing seasons (2014 and 2015). Data obtained showed that the most efficient intercropping variants were cabbage/faba bean (cabbage yield 1.27-2.91 kg m -2 , immature faba bean pods 0.20-0.43 kg m -2 ) and carrot/faba bean (carrot yield 1.67-2.28 kg m -2 , immature faba bean pods 0.10-0.52 kg m -2 ), whilst onion and faba bean intercrop is not recommended for vegetable growing since it induces a very low onion yield (0.66-1.09 kg m -2 ), although the highest immature faba bean pod yield was found in the onion/faba bean intercropping scheme (up to 0.56 kg m -2 ). Vegetable/faba bean intercropping can be used in practical horticulture for carrot and cabbage growing in order to ensure sustainable farming and environmentally friendly horticultural production. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Carob pod water extracts as feedstock for succinic acid production by Actinobacillus succinogenes 130Z.

PubMed

Carvalho, Margarida; Roca, Christophe; Reis, Maria A M

2014-10-01

Carob pods are a by-product of locust bean gum industry containing more than 50% (w/w) sucrose, glucose and fructose. In this work, carob pod water extracts were used, for the first time, for succinic acid production by Actinobacillus succinogenes 130Z. Kinetic studies of glucose, fructose and sucrose consumption as individual carbon sources till 30g/L showed no inhibition on cell growth, sugar consumption and SA production rates. Sugar extraction from carob pods was optimized varying solid/liquid ratio and extraction time, maximizing sugar recovery while minimizing the extraction of polyphenols. Batch fermentations containing 10-15g/L total sugars resulted in a maximum specific SA production rate of 0.61Cmol/Cmol X.h, with a yield of 0.55Cmol SA/Cmol sugar and a volumetric productivity of 1.61g SA/L.h. Results demonstrate that carob pods can be a promising low cost feedstock for bio-based SA production. Copyright © 2014 Elsevier Ltd. All rights reserved.

Simulation assisted pod of a phased array ultrasonic inspection in manufacturing

NASA Astrophysics Data System (ADS)

Dominguez, N.; Feuillard, V.; Jenson, F.; Willaume, P.

2012-05-01

The concept of Probability of Detection (POD) is generally used to quantitatively assess performances and reliability of NDT operations for in-service operations related to damage tolerant designs. Application of the POD approach as a metric for manufacturing NDT assessment would also be relevant but the very expensive cost of such campaigns generally prevents us from doing so. However the increase in NDT simulation capability and maturity opens the field for POD demonstrations for manufacturing NDT with the help of simulation. This paper presents the example of an automated phased array ultrasonic testing procedure of Electron Beam Welding on rotative parts, as part of the PICASSO European project. POD is calculated by using the uncertainty propagation approach in CIVA. The peculiarity of uncertainties in automated NDT compared to in-service manual operations is discussed and raises questions on appropriate statistics to be used for this kind of data. Alternative estimation techniques like Box-Cox transform or quantile regression are proposed and evaluated.

Sample size for estimating mean and coefficient of variation in species of crotalarias.

PubMed

Toebe, Marcos; Machado, Letícia N; Tartaglia, Francieli L; Carvalho, Juliana O DE; Bandeira, Cirineu T; Cargnelutti Filho, Alberto

2018-04-16

The objective of this study was to determine the sample size necessary to estimate the mean and coefficient of variation in four species of crotalarias (C. juncea, C. spectabilis, C. breviflora and C. ochroleuca). An experiment was carried out for each species during the season 2014/15. At harvest, 1,000 pods of each species were randomly collected. In each pod were measured: mass of pod with and without seeds, length, width and height of pods, number and mass of seeds per pod, and mass of hundred seeds. Measures of central tendency, variability and distribution were calculated, and the normality was verified. The sample size necessary to estimate the mean and coefficient of variation with amplitudes of the confidence interval of 95% (ACI95%) of 2%, 4%, ..., 20% was determined by resampling with replacement. The sample size varies among species and characters, being necessary a larger sample size to estimate the mean in relation of the necessary for the coefficient of variation.

Preparedness for epidemic disease or bioterrorism: minimum cost planning for the location and staffing of urban point-of-dispensing centers.

PubMed

Bowen, William M; Chen, Jen-Yi; Tukel, Oya I

2014-01-01

Urban health authorities in the United States have been charged with developing plans for providing the infrastructure necessary to dispense prophylactic medications to their populations in the case of epidemic disease outbreak or bioterrorist attack. However, no specific method for such plans has been prescribed. This article formulates and demonstrates the use of an integer programming technique for helping to solve a part of the dispensing problem faced by cities, namely that of providing the federally required infrastructure at minimum cost, using their limited time and resources. Specifically, the technique minimizes the number of point-of-dispensing (POD) centers while covering every resident in all the census tracts within the city's jurisdiction. It also determines the optimal staffing requirement in terms of the number of nurses at each POD. This article includes a demonstration of the model using real data from Cleveland, OH, a mid-sized US city. Examples are provided of data and computational results for a variety of input parameter values such as population throughput rate, POD capacities, and distance limitations. The technique can be readily adapted to a wide range of urban areas.

Best practices for evaluating the capability of nondestructive evaluation (NDE) and structural health monitoring (SHM) techniques for damage characterization

NASA Astrophysics Data System (ADS)

Aldrin, John C.; Annis, Charles; Sabbagh, Harold A.; Lindgren, Eric A.

2016-02-01

A comprehensive approach to NDE and SHM characterization error (CE) evaluation is presented that follows the framework of the `ahat-versus-a' regression analysis for POD assessment. Characterization capability evaluation is typically more complex with respect to current POD evaluations and thus requires engineering and statistical expertise in the model-building process to ensure all key effects and interactions are addressed. Justifying the statistical model choice with underlying assumptions is key. Several sizing case studies are presented with detailed evaluations of the most appropriate statistical model for each data set. The use of a model-assisted approach is introduced to help assess the reliability of NDE and SHM characterization capability under a wide range of part, environmental and damage conditions. Best practices of using models are presented for both an eddy current NDE sizing and vibration-based SHM case studies. The results of these studies highlight the general protocol feasibility, emphasize the importance of evaluating key application characteristics prior to the study, and demonstrate an approach to quantify the role of varying SHM sensor durability and environmental conditions on characterization performance.

Molecular Characterization of Resistant Accessions of Cocoa (Theobroma cocoa L.) to Phytophthora Pod Rot Selected on-Farm in Côte-d’Ivoire.

USDA-ARS?s Scientific Manuscript database

Cocoa is (Theobroma cacao L.) is a significant agricultural commodity in Côted’Ivoire which ranks 1st in the world cocoa export. Phytophthora pod rot (Ppr)also call Black pod is the most widespread disease of cocoa. Lost due to this disease depends on the species of the pathogen and vary globally fr...

Emergent, Self-Directed, and Self-Organized Learning: Literacy, Numeracy, and the iPod Touch

ERIC Educational Resources Information Center

Ricci, Carlo

2011-01-01

This paper uses narrative and storying to retell how two girls ages 5 and 7 continue to make use of an iPod touch to expand their literacy and numeracy. The paper explores the stopwatch and alarm features within the clock application, as well as the weather application, and the Internet browsing capability of the iPod touch. It also explores some…

Compact survey and inspection day/night image sensor suite for small unmanned aircraft systems (EyePod)

NASA Astrophysics Data System (ADS)

Bird, Alan; Anderson, Scott A.; Linne von Berg, Dale; Davidson, Morgan; Holt, Niel; Kruer, Melvin; Wilson, Michael L.

2010-04-01

EyePod is a compact survey and inspection day/night imaging sensor suite for small unmanned aircraft systems (UAS). EyePod generates georeferenced image products in real-time from visible near infrared (VNIR) and long wave infrared (LWIR) imaging sensors and was developed under the ONR funded FEATHAR (Fusion, Exploitation, Algorithms, and Targeting for High-Altitude Reconnaissance) program. FEATHAR is being directed and executed by the Naval Research Laboratory (NRL) in conjunction with the Space Dynamics Laboratory (SDL) and FEATHAR's goal is to develop and test new tactical sensor systems specifically designed for small manned and unmanned platforms (payload weight < 50 lbs). The EyePod suite consists of two VNIR/LWIR (day/night) gimbaled sensors that, combined, provide broad area survey and focused inspection capabilities. Each EyePod sensor pairs an HD visible EO sensor with a LWIR bolometric imager providing precision geo-referenced and fully digital EO/IR NITFS output imagery. The LWIR sensor is mounted to a patent-pending jitter-reduction stage to correct for the high-frequency motion typically found on small aircraft and unmanned systems. Details will be presented on both the wide-area and inspection EyePod sensor systems, their modes of operation, and results from recent flight demonstrations.

Delirium, Frailty, and Fast-Track Surgery in Oncogeriatrics: Is There a Link?

PubMed Central

Monacelli, Fiammetta; Signori, Alessio; Prefumo, Matteo; Giannotti, Chiara; Nencioni, Alessio; Romairone, Emanuele; Scabini, Stefano; Odetti, Patrizio

2018-01-01

Background/Aims Postoperative delirium (POD) is more frequent in elderly patients undergoing major cancer surgery. The interplay between individual clinical vulnerability and a series of perioperative factors seems to play a relevant role. Surgery is the first-line treatment option for cancer, and fast-track surgery (FTS) has been documented to decrease postoperative complications. The study sought to assess, after comprehensive geriatric assessment (CGA) and frailty stratification (Rockwood 40 items index), which perioperative parameters were predictive of POD development in elderly patients undergoing FTS for colorectal cancer. Methods A total of 107 consecutive subjects admitted for elective colorectal FTS were enrolled. All patients underwent CGA, frailly stratification, Timed up & go (TUG) test, 4AT test for delirium screening, anesthesiologists physical status classification, and Dindo-Clavien classification. Results The incidence of POD was 12.3%. Patients’ prevalent clinical phenotype was pre-frail. The multivariate analysis indicated physical performance (TUG in seconds) as the most significant predictor of POD for each second of increase. Conclusions Only few procedure-specific studies have examined the impact of FTS for colorectal cancer on POD. This is the first study to investigate the risk factors for POD, in a vulnerable octogenarian oncogeriatric population submitted to FTS surgery and frailty stratification. PMID:29515621

Development of POD from in-service NDI data

NASA Astrophysics Data System (ADS)

Forsyth, David S.; Fahr, Abbas; Leemans, Dirk V.; McRae, Ken I.

2000-05-01

The economic drive towards using aircraft beyond their initial design life has created a great interest in damage-tolerance (DT) based maintenance. The DT approach relies on routine nondestructive inspections (NDI), and requires that the NDI performance to be quantified in terms probability of detection (POD) to determine the safe inspection intervals. The most common approach for determining NDI POD is to perform inspections on representative components or specimens simulating the actual parts. This approach is practical but can be very expensive. A more economical approach may be to use actual field inspection data to obtain POD. This approach is particularly attractive for airframe inspection techniques, since most airframe structures cannot be easily simulated. There are a number of difficulties with this approach: Firstly, there is usually a very limited amount of field data. This may require special statistical treatment. Secondly, crack growth data must exist to allow the estimation of flaw sizes at the inspection sites at inspection times before the flaws were found. These factors and others affect the confidence in the calculated POD, and must be quantified before POD data of this type can be used. In this work, data from full scale fatigue tests were analyzed, and methods of overcoming the problems of small sample sizes and crack growth data requirements were investigated.

Temporally and spatially restricted expression of a gland cell gene during regeneration and in vitro transdifferentiation in the hydrozoan Podocoryne carnea.

PubMed

Baader, C D; Schuchert, P; Schmid, V; Heiermann, Reinhard; Plickert, Günter

1995-01-01

An antiserum to transdifferentiated striated muscle cells from the medusa of Podocoryne carnea was prepared and used to screen a λ gt11-expression library prepared from gonozoids of P. carnea. We isolated a cDNA clone termed Pod-EPPT with at least 63 tandem repeats of the tetrapeptide-motive glu-pro-pro-thr, named Pod-EPPT. Using Pod-EPPT as a molecular marker for head quality the morphological relationship between the two metagenic life stages of this hydroid, the polyp and the medusa, was studied. In situ hybridization demonstrated that expression of the gene corresponding is restricted to secretory cells in the endoderm of the oral hypostome region of polyps and medusae and, presumably, to progenitor cells of this type. Cells expressing Pod-EPPT could not be observed in the larval stage. During head regeneration in polyps, Pod-EPPT expression is upregulated soon after head removal in previously non-expressing cells and in newly differentiating secretory cells. This activation of a head-specific gene precedes the morphologically obvious events of head regeneration. Pod-EPPT is one of the genes that are activated during manubrium (mouth) regeneration from experimentally combined subumbrellar plate endoderm and striated muscle of the medusa.