Incremental isometric embedding of high-dimensional data using connected neighborhood graphs.

PubMed

Zhao, Dongfang; Yang, Li

2009-01-01

Most nonlinear data embedding methods use bottom-up approaches for capturing the underlying structure of data distributed on a manifold in high dimensional space. These methods often share the first step which defines neighbor points of every data point by building a connected neighborhood graph so that all data points can be embedded to a single coordinate system. These methods are required to work incrementally for dimensionality reduction in many applications. Because input data stream may be under-sampled or skewed from time to time, building connected neighborhood graph is crucial to the success of incremental data embedding using these methods. This paper presents algorithms for updating $k$-edge-connected and $k$-connected neighborhood graphs after a new data point is added or an old data point is deleted. It further utilizes a simple algorithm for updating all-pair shortest distances on the neighborhood graph. Together with incremental classical multidimensional scaling using iterative subspace approximation, this paper devises an incremental version of Isomap with enhancements to deal with under-sampled or unevenly distributed data. Experiments on both synthetic and real-world data sets show that the algorithm is efficient and maintains low dimensional configurations of high dimensional data under various data distributions.

Filament wound data base development, revision 1, appendix A

NASA Technical Reports Server (NTRS)

Sharp, R. Scott; Braddock, William F.

1985-01-01

Data are presented in tabular form for the High Performance Nozzle Increments, Filament Wound Case (FWC) Systems Tunnel Increments, Steel Case Systems Tunnel Increments, FWC Stiffener Rings Increments, Steel Case Stiffener Rings Increments, FWC External Tank (ET) Attach Ring Increments, Steel Case ET Attach Ring Increments, and Data Tape 8. The High Performance Nozzle are also presented in graphical form. The tabular data consist of six-component force and moment coefficients as they vary with angle of attack at a specific Mach number and roll angle. The six coefficients are normal force, pitching moment, side force, yawing moment, axial force, and rolling moment. The graphical data for the High Performance Nozzle Increments consist of a plot of a coefficient increment as a function of angle of attack at a specific Mach number and at a roll angle of 0 deg.

Developing an experimental case in aluminium foils 1100 to determine the maximum angle of formability in a piece by Dieless-SPIF process

NASA Astrophysics Data System (ADS)

Gabriel, Paramo; Adrian, Benitez

2014-07-01

Incremental sheet forming by the method of single point incremental forming Dieless-SPIF, is a widely studied process, experimented and developed in countries with high manufacturing technologies, with friendly costs when the productive configuration in a productivity system is based in small production batches. United states, United kingdom and France lead this type of studies and cases, developing various proof with experimental geometries, different from the national environment such as Colombia, Bolivia, Chile, Ecuador and Peru where this process where discretely studied. Previously mentioned, it pretends develop an experimental case of a particular geometry, identifying the maximum formability angle of material permissible for the forming of a piece in one pass, the analysis of forming limit curve (FLC), with the objective to emphasizes in this innovative method based in CAD-CAM technologies, compare with other analogous process of deformation sheet metal like embossing, take correct decisions about the viability and applicability of this process (Dieless) in a particular industrial piece, which responses to the necessities of productive configurations mentioned and be highly taken like a manufacturing alternative to the other conventional process of forming sheet metal like embossing, for systems with slow batches production.

Performance analysis of the incremental sheet forming on PMMA using a combined chemical and mechanical approach

NASA Astrophysics Data System (ADS)

Conte, R.; Gagliardi, F.; Ambrogio, G.; Filice, F.; Russo, P.

2017-10-01

Single Point Incremental Forming (SPIF) has been widely investigated highlighting advantages as low-cost, higher formability and greater process flexibility if compared to traditional processes [1]. Recent works have proven the SPIF feasibility for polymers processing. Experimental researches have been carried out with the aim to investigate the influence of several working variables, i.e. spindle speed, tool diameter, step depth, etc., on the final quality of the formed parts [2, 3]. The processed thermoplastic materials are characterized by glass temperatures close to the room temperature and, therefore, SPIF has been performed without external thermal source, exploiting mostly the friction heat generated during the forming phases. In the proposed work, the attention has been focused on extruded poly(methyl methacrylate) (PMMA) sheets, which are characterized by a glass temperature of more than 100 °C. Because of that, an experimental equipment has been designed and the PMMA sheets have been placed on the top of chamber with controlled temperature before SPIF beginning. The temperature on the upper face of the sheets has been monitored by thermocamera, which has been properly set by matching its readings with the ones extracted by a thermocouple in contact with the sheets. SPIF at different temperatures has been carried out by changing both the heater temperature and the process parameters which have an influence on the workpiece heating. The influence of the highlighted process conditions on the worked parts and on the process feasibility has been investigated. Furthermore, examinations on the quality of the formed parts have been performed pointing out the effects that different process conditions have on surface integrity.

Process Parameters Optimization in Single Point Incremental Forming

NASA Astrophysics Data System (ADS)

Gulati, Vishal; Aryal, Ashmin; Katyal, Puneet; Goswami, Amitesh

2016-04-01

This work aims to optimize the formability and surface roughness of parts formed by the single-point incremental forming process for an Aluminium-6063 alloy. The tests are based on Taguchi's L18 orthogonal array selected on the basis of DOF. The tests have been carried out on vertical machining center (DMC70V); using CAD/CAM software (SolidWorks V5/MasterCAM). Two levels of tool radius, three levels of sheet thickness, step size, tool rotational speed, feed rate and lubrication have been considered as the input process parameters. Wall angle and surface roughness have been considered process responses. The influential process parameters for the formability and surface roughness have been identified with the help of statistical tool (response table, main effect plot and ANOVA). The parameter that has the utmost influence on formability and surface roughness is lubrication. In the case of formability, lubrication followed by the tool rotational speed, feed rate, sheet thickness, step size and tool radius have the influence in descending order. Whereas in surface roughness, lubrication followed by feed rate, step size, tool radius, sheet thickness and tool rotational speed have the influence in descending order. The predicted optimal values for the wall angle and surface roughness are found to be 88.29° and 1.03225 µm. The confirmation experiments were conducted thrice and the value of wall angle and surface roughness were found to be 85.76° and 1.15 µm respectively.

Scalable Prediction of Energy Consumption using Incremental Time Series Clustering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simmhan, Yogesh; Noor, Muhammad Usman

2013-10-09

Time series datasets are a canonical form of high velocity Big Data, and often generated by pervasive sensors, such as found in smart infrastructure. Performing predictive analytics on time series data can be computationally complex, and requires approximation techniques. In this paper, we motivate this problem using a real application from the smart grid domain. We propose an incremental clustering technique, along with a novel affinity score for determining cluster similarity, which help reduce the prediction error for cumulative time series within a cluster. We evaluate this technique, along with optimizations, using real datasets from smart meters, totaling ~700,000 datamore » points, and show the efficacy of our techniques in improving the prediction error of time series data within polynomial time.« less

String-averaging incremental subgradients for constrained convex optimization with applications to reconstruction of tomographic images

NASA Astrophysics Data System (ADS)

Massambone de Oliveira, Rafael; Salomão Helou, Elias; Fontoura Costa, Eduardo

2016-11-01

We present a method for non-smooth convex minimization which is based on subgradient directions and string-averaging techniques. In this approach, the set of available data is split into sequences (strings) and a given iterate is processed independently along each string, possibly in parallel, by an incremental subgradient method (ISM). The end-points of all strings are averaged to form the next iterate. The method is useful to solve sparse and large-scale non-smooth convex optimization problems, such as those arising in tomographic imaging. A convergence analysis is provided under realistic, standard conditions. Numerical tests are performed in a tomographic image reconstruction application, showing good performance for the convergence speed when measured as the decrease ratio of the objective function, in comparison to classical ISM.

International Space Station Increment Operations Services

NASA Astrophysics Data System (ADS)

Michaelis, Horst; Sielaff, Christian

2002-01-01

The Industrial Operator (IO) has defined End-to-End services to perform efficiently all required operations tasks for the Manned Space Program (MSP) as agreed during the Ministerial Council in Edinburgh in November 2001. Those services are the result of a detailed task analysis based on the operations processes as derived from the Space Station Program Implementation Plans (SPIP) and defined in the Operations Processes Documents (OPD). These services are related to ISS Increment Operations and ATV Mission Operations. Each of these End-to-End services is typically characterised by the following properties: It has a clearly defined starting point, where all requirements on the end-product are fixed and associated performance metrics of the customer are well defined. It has a clearly defined ending point, when the product or service is delivered to the customer and accepted by him, according to the performance metrics defined at the start point. The implementation of the process might be restricted by external boundary conditions and constraints mutually agreed with the customer. As far as those are respected the IO has the free choice to select methods and means of implementation. The ISS Increment Operations Service (IOS) activities required for the MSP Exploitation program cover the complete increment specific cycle starting with the support to strategic planning and ending with the post increment evaluation. These activities are divided into sub-services including the following tasks: - ISS Planning Support covering the support to strategic and tactical planning up to the generation - Development &Payload Integration Support - ISS Increment Preparation - ISS Increment Execution These processes are tight together by the Increment Integration Management, which provides the planning and scheduling of all activities as well as the technical management of the overall process . The paper describes the entire End-to-End ISS Increment Operations service and the implementation to support the Columbus Flight 1E related increment and subsequent ISS increments. Special attention is paid to the implications caused by long term operations on hardware, software and operations personnel.

The National Grid Project: A system overview

NASA Technical Reports Server (NTRS)

Gaither, Adam; Gaither, Kelly; Jean, Brian; Remotigue, Michael; Whitmire, John; Soni, Bharat; Thompson, Joe; Dannenhoffer,, John; Weatherill, Nigel

1995-01-01

The National Grid Project (NGP) is a comprehensive numerical grid generation software system that is being developed at the National Science Foundation (NSF) Engineering Research Center (ERC) for Computational Field Simulation (CFS) at Mississippi State University (MSU). NGP is supported by a coalition of U.S. industries and federal laboratories. The objective of the NGP is to significantly decrease the amount of time it takes to generate a numerical grid for complex geometries and to increase the quality of these grids to enable computational field simulations for applications in industry. A geometric configuration can be discretized into grids (or meshes) that have two fundamental forms: structured and unstructured. Structured grids are formed by intersecting curvilinear coordinate lines and are composed of quadrilateral (2D) and hexahedral (3D) logically rectangular cells. The connectivity of a structured grid provides for trivial identification of neighboring points by incrementing coordinate indices. Unstructured grids are composed of cells of any shape (commonly triangles, quadrilaterals, tetrahedra and hexahedra), but do not have trivial identification of neighbors by incrementing an index. For unstructured grids, a set of points and an associated connectivity table is generated to define unstructured cell shapes and neighboring points. Hybrid grids are a combination of structured grids and unstructured grids. Chimera (overset) grids are intersecting or overlapping structured grids. The NGP system currently provides a user interface that integrates both 2D and 3D structured and unstructured grid generation, a solid modeling topology data management system, an internal Computer Aided Design (CAD) system based on Non-Uniform Rational B-Splines (NURBS), a journaling language, and a grid/solution visualization system.

Incremental electrohydraulic forming - A new approach for the manufacture of structured multifunctional sheet metal blanks

NASA Astrophysics Data System (ADS)

Djakow, Eugen; Springer, Robert; Homberg, Werner; Piper, Mark; Tran, Julian; Zibart, Alexander; Kenig, Eugeny

2017-10-01

Electrohydraulic Forming (EHF) processes permit the production of complex, sharp-edged geometries even when high-strength materials are used. Unfortunately, the forming zone is often limited as compared to other sheet metal forming processes. The use of a special industrial-robot-based tool setup and an incremental process strategy could provide a promising solution for this problem. This paper describes such an innovative approach using an electrohydraulic incremental forming machine, which can be employed to manufacture the large multifunctional and complex part geometries in steel, aluminium, magnesium and reinforced plastic that are employed in lightweight constructions or heating elements.

The value of crossdating to retain high-frequency variability, climate signals, and extreme events in environmental proxies.

PubMed

Black, Bryan A; Griffin, Daniel; van der Sleen, Peter; Wanamaker, Alan D; Speer, James H; Frank, David C; Stahle, David W; Pederson, Neil; Copenheaver, Carolyn A; Trouet, Valerie; Griffin, Shelly; Gillanders, Bronwyn M

2016-07-01

High-resolution biogenic and geologic proxies in which one increment or layer is formed per year are crucial to describing natural ranges of environmental variability in Earth's physical and biological systems. However, dating controls are necessary to ensure temporal precision and accuracy; simple counts cannot ensure that all layers are placed correctly in time. Originally developed for tree-ring data, crossdating is the only such procedure that ensures all increments have been assigned the correct calendar year of formation. Here, we use growth-increment data from two tree species, two marine bivalve species, and a marine fish species to illustrate sensitivity of environmental signals to modest dating error rates. When falsely added or missed increments are induced at one and five percent rates, errors propagate back through time and eliminate high-frequency variability, climate signals, and evidence of extreme events while incorrectly dating and distorting major disturbances or other low-frequency processes. Our consecutive Monte Carlo experiments show that inaccuracies begin to accumulate in as little as two decades and can remove all but decadal-scale processes after as little as two centuries. Real-world scenarios may have even greater consequence in the absence of crossdating. Given this sensitivity to signal loss, the fundamental tenets of crossdating must be applied to fully resolve environmental signals, a point we underscore as the frontiers of growth-increment analysis continue to expand into tropical, freshwater, and marine environments. © 2016 John Wiley & Sons Ltd.

Theories and applications of second-order correlation of longitudinal velocity increments at three points in isotropic turbulence

NASA Astrophysics Data System (ADS)

Wu, J. Z.; Fang, L.; Shao, L.; Lu, L. P.

2018-06-01

In order to introduce new physics to traditional two-point correlations, we define the second-order correlation of longitudinal velocity increments at three points and obtain the analytical expressions in isotropic turbulence. By introducing the Kolmogorov 4/5 law, this three-point correlation explicitly contains velocity second- and third-order moments, which correspond to energy and energy transfer respectively. The combination of them then shows additional information of non-equilibrium turbulence by comparing to two-point correlations. Moreover, this three-point correlation shows the underlying inconsistency between numerical interpolation and three-point scaling law in numerical calculations, and inspires a preliminary model to correct this problem in isotropic turbulence.

Sensing mode atomic force microscope

DOEpatents

Hough, Paul V. C.; Wang, Chengpu

2006-08-22

An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

Sensing mode atomic force microscope

DOEpatents

Hough, Paul V.; Wang, Chengpu

2004-11-16

An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique

NASA Astrophysics Data System (ADS)

Moayedfar, M.; Rani, A. M.; Hanaei, H.; Ahmad, A.; Tale, A.

2017-10-01

Incremental sheet forming is a flexible manufacturing process which uses the indenter point-to-point force to shape the sheet metal workpiece into manufactured parts in batch production series. However, the problem sometimes arising from this process is the low plastic point in the stress-strain diagram of the material which leads the low stretching amount before ultra-tensile strain point. Hence, a set of experiments is designed to find the optimum forming parameters in this process for optimum sheet thickness distribution while both sides of the sheet are considered for the surface quality improvement. A five-axis high-speed CNC milling machine is employed to deliver the proper motion based on the programming system while the clamping system for holding the sheet metal was a blank mould. Finally, an electron microscope and roughness machine are utilized to evaluate the surface structure of final parts, illustrate any defect may cause during the forming process and examine the roughness of the final part surface accordingly. The best interaction between parameters is obtained with the optimum values which lead the maximum sheet thickness distribution of 4.211e-01 logarithmic elongation when the depth was 24mm with respect to the design. This study demonstrates that this rapid forming method offers an alternative solution for surface quality improvement of 65% avoiding the low probability of cracks and low probability of crystal structure changes.

Apparatus for electrical-assisted incremental forming and process thereof

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roth, John; Cao, Jian

A process and apparatus for forming a sheet metal component using an electric current passing through the component. The process can include providing an incremental forming machine, the machine having at least one arcuate tipped tool and at least electrode spaced a predetermined distance from the arcuate tipped tool. The machine is operable to perform a plurality of incremental deformations on the sheet metal component using the arcuate tipped tool. The machine is also operable to apply an electric direct current through the electrode into the sheet metal component at the predetermined distance from the arcuate tipped tool while themore » machine is forming the sheet metal component.« less

Electrical-assisted double side incremental forming and processes thereof

DOEpatents

Roth, John; Cao, Jian

2014-06-03

A process for forming a sheet metal component using an electric current passing through the component is provided. The process can include providing a double side incremental forming machine, the machine operable to perform a plurality of double side incremental deformations on the sheet metal component and also apply an electric direct current to the sheet metal component during at least part of the forming. The direct current can be applied before or after the forming has started and/or be terminated before or after the forming has stopped. The direct current can be applied to any portion of the sheet metal. The electrical assistance can reduce the magnitude of force required to produce a given amount of deformation, increase the amount of deformation exhibited before failure and/or reduce any springback typically exhibited by the sheet metal component.

Optimization of Surface Roughness and Wall Thickness in Dieless Incremental Forming Of Aluminum Sheet Using Taguchi

NASA Astrophysics Data System (ADS)

Hamedon, Zamzuri; Kuang, Shea Cheng; Jaafar, Hasnulhadi; Azhari, Azmir

2018-03-01

Incremental sheet forming is a versatile sheet metal forming process where a sheet metal is formed into its final shape by a series of localized deformation without a specialised die. However, it still has many shortcomings that need to be overcome such as geometric accuracy, surface roughness, formability, forming speed, and so on. This project focus on minimising the surface roughness of aluminium sheet and improving its thickness uniformity in incremental sheet forming via optimisation of wall angle, feed rate, and step size. Besides, the effect of wall angle, feed rate, and step size to the surface roughness and thickness uniformity of aluminium sheet was investigated in this project. From the results, it was observed that surface roughness and thickness uniformity were inversely varied due to the formation of surface waviness. Increase in feed rate and decrease in step size will produce a lower surface roughness, while uniform thickness reduction was obtained by reducing the wall angle and step size. By using Taguchi analysis, the optimum parameters for minimum surface roughness and uniform thickness reduction of aluminium sheet were determined. The finding of this project helps to reduce the time in optimising the surface roughness and thickness uniformity in incremental sheet forming.

Influence of part orientation on the geometric accuracy in robot-based incremental sheet metal forming

NASA Astrophysics Data System (ADS)

Störkle, Denis Daniel; Seim, Patrick; Thyssen, Lars; Kuhlenkötter, Bernd

2016-10-01

This article describes new developments in an incremental, robot-based sheet metal forming process (`Roboforming') for the production of sheet metal components for small lot sizes and prototypes. The dieless kinematic-based generation of the shape is implemented by means of two industrial robots, which are interconnected to a cooperating robot system. Compared to other incremental sheet metal forming (ISF) machines, this system offers high geometrical form flexibility without the need of any part-dependent tools. The industrial application of ISF is still limited by certain constraints, e.g. the low geometrical accuracy. Responding to these constraints, the authors present the influence of the part orientation and the forming sequence on the geometric accuracy. Their influence is illustrated with the help of various experimental results shown and interpreted within this article.

Feature-constrained surface reconstruction approach for point cloud data acquired with 3D laser scanner

NASA Astrophysics Data System (ADS)

Wang, Yongbo; Sheng, Yehua; Lu, Guonian; Tian, Peng; Zhang, Kai

2008-04-01

Surface reconstruction is an important task in the field of 3d-GIS, computer aided design and computer graphics (CAD & CG), virtual simulation and so on. Based on available incremental surface reconstruction methods, a feature-constrained surface reconstruction approach for point cloud is presented. Firstly features are extracted from point cloud under the rules of curvature extremes and minimum spanning tree. By projecting local sample points to the fitted tangent planes and using extracted features to guide and constrain the process of local triangulation and surface propagation, topological relationship among sample points can be achieved. For the constructed models, a process named consistent normal adjustment and regularization is adopted to adjust normal of each face so that the correct surface model is achieved. Experiments show that the presented approach inherits the convenient implementation and high efficiency of traditional incremental surface reconstruction method, meanwhile, it avoids improper propagation of normal across sharp edges, which means the applicability of incremental surface reconstruction is greatly improved. Above all, appropriate k-neighborhood can help to recognize un-sufficient sampled areas and boundary parts, the presented approach can be used to reconstruct both open and close surfaces without additional interference.

PLOT3D- DRAWING THREE DIMENSIONAL SURFACES

NASA Technical Reports Server (NTRS)

Canright, R. B.

1994-01-01

PLOT3D is a package of programs to draw three-dimensional surfaces of the form z = f(x,y). The function f and the boundary values for x and y are the input to PLOT3D. The surface thus defined may be drawn after arbitrary rotations. However, it is designed to draw only functions in rectangular coordinates expressed explicitly in the above form. It cannot, for example, draw a sphere. Output is by off-line incremental plotter or online microfilm recorder. This package, unlike other packages, will plot any function of the form z = f(x,y) and portrays continuous and bounded functions of two independent variables. With curve fitting; however, it can draw experimental data and pictures which cannot be expressed in the above form. The method used is division into a uniform rectangular grid of the given x and y ranges. The values of the supplied function at the grid points (x, y) are calculated and stored; this defines the surface. The surface is portrayed by connecting successive (y,z) points with straight-line segments for each x value on the grid and, in turn, connecting successive (x,z) points for each fixed y value on the grid. These lines are then projected by parallel projection onto the fixed yz-plane for plotting. This program has been implemented on the IBM 360/67 with on-line CDC microfilm recorder.

Coated graphite articles useful in metallurgical processes and method for making same

DOEpatents

Holcombe, Cressie E.; Bird, Eugene L.

1995-01-01

Graphite articles including crucibles and molds used in metallurgical processes involving the melting and the handling of molten metals and alloys that are reactive with carbon when in a molten state and at process temperatures up to about 2000.degree. C. are provided with a multiple-layer coating for inhibiting carbon diffusion from the graphite into the molten metal or alloys. The coating is provided by a first coating increment of a carbide-forming metal on selected surfaces of the graphite, a second coating increment of a carbide forming metal and a refractory metal oxide, and a third coating increment of a refractory metal oxide. The second coating increment provides thermal shock absorbing characteristics to prevent delamination of the coating during temperature cycling. A wash coat of unstabilized zirconia or titanium nitride can be applied onto the third coating increment to facilitate release of melts from the coating.

26 CFR 1.41-8T - Alternative incremental credit (temporary).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Alternative incremental credit (temporary). 1.41... INCOME TAXES Credits Against Tax § 1.41-8T Alternative incremental credit (temporary). (a) [Reserved] For... alternative simplified credit (ASC) and attaches the completed form to the taxpayer's timely filed (including...

Adaptive scallop height tool path generation for robot-based incremental sheet metal forming

NASA Astrophysics Data System (ADS)

Seim, Patrick; Möllensiep, Dennis; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2016-10-01

Incremental sheet metal forming is an emerging process for the production of individualized products or prototypes in low batch sizes and with short times to market. In these processes, the desired shape is produced by the incremental inward motion of the workpiece-independent forming tool in depth direction and its movement along the contour in lateral direction. Based on this shape production, the tool path generation is a key factor on e.g. the resulting geometric accuracy, the resulting surface quality, and the working time. This paper presents an innovative tool path generation based on a commercial milling CAM package considering the surface quality and working time. This approach offers the ability to define a specific scallop height as an indicator of the surface quality for specific faces of a component. Moreover, it decreases the required working time for the production of the entire component compared to the use of a commercial software package without this adaptive approach. Different forming experiments have been performed to verify the newly developed tool path generation. Mainly, this approach serves to solve the existing conflict of combining the working time and the surface quality within the process of incremental sheet metal forming.

Demonstration/Validation of Incremental Sampling at Two Diverse Military Ranges and Development of an Incremental Sampling Tool

DTIC Science & Technology

2010-06-01

Sampling (MIS)? • Technique of combining many increments of soil from a number of points within exposure area • Developed by Enviro Stat (Trademarked...Demonstrating a reliable soil sampling strategy to accurately characterize contaminant concentrations in spatially extreme and heterogeneous...into a set of decision (exposure) units • One or several discrete or small- scale composite soil samples collected to represent each decision unit

Model Identification and FE Simulations: Effect of Different Yield Loci and Hardening Laws in Sheet Forming

NASA Astrophysics Data System (ADS)

Flores, P.; Duchêne, L.; Lelotte, T.; Bouffioux, C.; El Houdaigui, F.; Van Bael, A.; He, S.; Duflou, J.; Habraken, A. M.

2005-08-01

The bi-axial experimental equipment developed by Flores enables to perform Baushinger shear tests and successive or simultaneous simple shear tests and plane-strain tests. Such experiments and classical tensile tests investigate the material behavior in order to identify the yield locus and the hardening models. With tests performed on two steel grades, the methods applied to identify classical yield surfaces such as Hill or Hosford ones as well as isotropic Swift type hardening or kinematic Armstrong-Frederick hardening models are explained. Comparison with the Taylor-Bishop-Hill yield locus is also provided. The effect of both yield locus and hardening model choice will be presented for two applications: Single Point Incremental Forming (SPIF) and a cup deep drawing.

Top-down attention based on object representation and incremental memory for knowledge building and inference.

PubMed

Kim, Bumhwi; Ban, Sang-Woo; Lee, Minho

2013-10-01

Humans can efficiently perceive arbitrary visual objects based on an incremental learning mechanism with selective attention. This paper proposes a new task specific top-down attention model to locate a target object based on its form and color representation along with a bottom-up saliency based on relativity of primitive visual features and some memory modules. In the proposed model top-down bias signals corresponding to the target form and color features are generated, which draw the preferential attention to the desired object by the proposed selective attention model in concomitance with the bottom-up saliency process. The object form and color representation and memory modules have an incremental learning mechanism together with a proper object feature representation scheme. The proposed model includes a Growing Fuzzy Topology Adaptive Resonance Theory (GFTART) network which plays two important roles in object color and form biased attention; one is to incrementally learn and memorize color and form features of various objects, and the other is to generate a top-down bias signal to localize a target object by focusing on the candidate local areas. Moreover, the GFTART network can be utilized for knowledge inference which enables the perception of new unknown objects on the basis of the object form and color features stored in the memory during training. Experimental results show that the proposed model is successful in focusing on the specified target objects, in addition to the incremental representation and memorization of various objects in natural scenes. In addition, the proposed model properly infers new unknown objects based on the form and color features of previously trained objects. Copyright © 2013 Elsevier Ltd. All rights reserved.

Distributions of Autocorrelated First-Order Kinetic Outcomes: Illness Severity

PubMed Central

Englehardt, James D.

2015-01-01

Many complex systems produce outcomes having recurring, power law-like distributions over wide ranges. However, the form necessarily breaks down at extremes, whereas the Weibull distribution has been demonstrated over the full observed range. Here the Weibull distribution is derived as the asymptotic distribution of generalized first-order kinetic processes, with convergence driven by autocorrelation, and entropy maximization subject to finite positive mean, of the incremental compounding rates. Process increments represent multiplicative causes. In particular, illness severities are modeled as such, occurring in proportion to products of, e.g., chronic toxicant fractions passed by organs along a pathway, or rates of interacting oncogenic mutations. The Weibull form is also argued theoretically and by simulation to be robust to the onset of saturation kinetics. The Weibull exponential parameter is shown to indicate the number and widths of the first-order compounding increments, the extent of rate autocorrelation, and the degree to which process increments are distributed exponential. In contrast with the Gaussian result in linear independent systems, the form is driven not by independence and multiplicity of process increments, but by increment autocorrelation and entropy. In some physical systems the form may be attracting, due to multiplicative evolution of outcome magnitudes towards extreme values potentially much larger and smaller than control mechanisms can contain. The Weibull distribution is demonstrated in preference to the lognormal and Pareto I for illness severities versus (a) toxicokinetic models, (b) biologically-based network models, (c) scholastic and psychological test score data for children with prenatal mercury exposure, and (d) time-to-tumor data of the ED01 study. PMID:26061263

A Numerical Process Control Method for Circular-Tube Hydroforming Prediction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Kenneth I.; Nguyen, Ba Nghiep; Davies, Richard W.

2004-03-01

This paper describes the development of a solution control method that tracks the stresses, strains and mechanical behavior of a tube during hydroforming to estimate the proper axial feed (end-feed) and internal pressure loads through time. The analysis uses the deformation theory of plasticity and Hill?s criterion to describe the plastic flow. Before yielding, the pressure and end-feed increments are estimated based on the initial tube geometry, elastic properties and yield stress. After yielding, the pressure increment is calculated based on the tube geometry at the previous solution increment and the current hoop stress increment. The end-feed increment is computedmore » from the increment of the axial plastic strain. Limiting conditions such as column buckling (of long tubes), local axi-symmetric wrinkling of shorter tubes, and bursting due to localized wall thinning are considered. The process control method has been implemented in the Marc finite element code. Hydroforming simulations using this process control method were conducted to predict the load histories for controlled expansion of 6061-T4 aluminum tubes within a conical die shape and under free hydroforming conditions. The predicted loading paths were transferred to the hydroforming equipment to form the conical and free-formed tube shapes. The model predictions and experimental results are compared for deformed shape, strains and the extent of forming at rupture.« less

The Potential Impact of CO2 and Air Temperature Increases on Krummholz's Transformation into Arborescent Form in the Southern Siberian Mountains

NASA Technical Reports Server (NTRS)

Kharuk, V. I.; Dvinskaya, M. L.; Im, S. T.; Ranson, K. J.

2011-01-01

Trees in the southern Siberian Mountains forest-tundra ecotone have considerably increased their radial and apical growth increments during the last few decades. This leads to the widespread vertical transformation of mat and prostrate krummholz forms of larch (Larix sibirica Ledeb) and Siberian pine (Pinus sibirica Du Tour). An analysis of the radial growth increments showed that these transformations began in the mid-1980s. Larch showed a greater resistance to the harsh alpine environment and attained a vertical growth form in areas where Siberian pine is still krummholz. Upper larch treeline is about 10 m higher than Siberian pine treeline. Observed apical and radial growth increment increases were correlated with CO2 concentration (r = 0.83-0.87), summer temperatures (r = 0.55-0.64), and "cold period" (i.e. September-May) air temperatures (r = 0.36-0.37). Positive correlation between growth increments and winter precipitation was attributed to snow cover protection for trees during wintertime.

Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates

NASA Astrophysics Data System (ADS)

Tuninetti, V.; Yuan, S.; Gilles, G.; Guzmán, C. F.; Habraken, A. M.; Duchêne, L.

2016-08-01

This paper presents different extensions of the classical GTN damage model implemented in a finite element code. The goal of this study is to assess these extensions for the numerical prediction of failure of a DC01 steel sheet during a single point incremental forming process, after a proper identification of the material parameters. It is shown that the prediction of failure appears too early compared to experimental results. Though, the use of the Thomason criterion permitted to delay the onset of coalescence and consequently the final failure.

Evaluating Expected Costs and Benefits of Granting Access to New Treatments on the Basis of Progression-Free Survival in Non-Small-Cell Lung Cancer.

PubMed

Lakdawalla, Darius N; Chou, Jacquelyn W; Linthicum, Mark T; MacEwan, Joanna P; Zhang, Jie; Goldman, Dana P

2015-05-01

Surrogate end points may be used as proxy for more robust clinical end points. One prominent example is the use of progression-free survival (PFS) as a surrogate for overall survival (OS) in trials for oncologic treatments. Decisions based on surrogate end points may expedite regulatory approval but may not accurately reflect drug efficacy. Payers and clinicians must balance the potential benefits of earlier treatment access based on surrogate end points against the risks of clinical uncertainty. To present a framework for evaluating the expected net benefit or cost of providing early access to new treatments on the basis of evidence of PFS benefits before OS results are available, using non-small-cell lung cancer (NSCLC) as an example. A probabilistic decision model was used to estimate expected incremental social value of the decision to grant access to a new treatment on the basis of PFS evidence. The model analyzed a hypothetical population of patients with NSCLC who could be treated during the period between PFS and OS evidence publication. Estimates for delay in publication of OS evidence following publication of PFS evidence, expected OS benefit given PFS benefit, incremental cost of new treatment, and other parameters were drawn from the literature on treatment of NSCLC. Incremental social value of early access for each additional patient per month (in 2014 US dollars). For "medium-value" model parameters, early reimbursement of drugs with any PFS benefit yields an incremental social cost of more than $170,000 per newly treated patient per month. In contrast, granting early access on the basis of PFS benefit between 1 and 3.5 months produces more than $73,000 in incremental social value. Across the full range of model parameter values, granting access for drugs with PFS benefit between 3 and 3.5 months is robustly beneficial, generating incremental social value ranging from $38,000 to more than $1 million per newly treated patient per month, whereas access for all drugs with any PFS benefit is usually not beneficial. The value of providing access to new treatments on the basis of surrogate end points, and PFS in particular, likely varies considerably. Payers and clinicians should carefully consider how to use PFS data in balancing potential benefits against costs in each particular disease.

Prediction of height increment for models of forest growth

Treesearch

Albert R. Stage

1975-01-01

Functional forms of equations were derived for predicting 10-year periodic height increment of forest trees from height, diameter, diameter increment, and habitat type. Crown ratio was considered as an additional variable for prediction, but its contribution was negligible. Coefficients of the function were estimated for 10 species of trees growing in 10 habitat types...

Incremental Validity of Test Session and Classroom Observations in a Multimethod Assessment of Attention Deficit/Hyperactivity Disorder

ERIC Educational Resources Information Center

McConaughy, Stephanie H.; Harder, Valerie S.; Antshel, Kevin M.; Gordon, Michael; Eiraldi, Ricardo; Dumenci, Levent

2010-01-01

This study tested the incremental validity of behavioral observations, over and above parent and teacher reports, for assessing symptoms of Attention Deficit/Hyperactivity Disorder (ADHD) in children ages 6 to 12, using the Test Observation Form (TOF) and Direct Observation Form (DOF) from the Achenbach System of Empirically Based Assessment. The…

Incremental Validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF).

PubMed

Siegling, A B; Vesely, Ashley K; Petrides, K V; Saklofske, Donald H

2015-01-01

This study examined the incremental validity of the adult short form of the Trait Emotional Intelligence Questionnaire (TEIQue-SF) in predicting 7 construct-relevant criteria beyond the variance explained by the Five-factor model and coping strategies. Additionally, the relative contributions of the questionnaire's 4 subscales were assessed. Two samples of Canadian university students completed the TEIQue-SF, along with measures of the Big Five, coping strategies (Sample 1 only), and emotion-laden criteria. The TEIQue-SF showed consistent incremental effects beyond the Big Five or the Big Five and coping strategies, predicting all 7 criteria examined across the 2 samples. Furthermore, 2 of the 4 TEIQue-SF subscales accounted for the measure's incremental validity. Although the findings provide good support for the validity and utility of the TEIQue-SF, directions for further research are emphasized.

Combining Accuracy and Efficiency: An Incremental Focal-Point Method Based on Pair Natural Orbitals.

PubMed

Fiedler, Benjamin; Schmitz, Gunnar; Hättig, Christof; Friedrich, Joachim

2017-12-12

In this work, we present a new pair natural orbitals (PNO)-based incremental scheme to calculate CCSD(T) and CCSD(T0) reaction, interaction, and binding energies. We perform an extensive analysis, which shows small incremental errors similar to previous non-PNO calculations. Furthermore, slight PNO errors are obtained by using T PNO = T TNO with appropriate values of 10 -7 to 10 -8 for reactions and 10 -8 for interaction or binding energies. The combination with the efficient MP2 focal-point approach yields chemical accuracy relative to the complete basis-set (CBS) limit. In this method, small basis sets (cc-pVDZ, def2-TZVP) for the CCSD(T) part are sufficient in case of reactions or interactions, while some larger ones (e.g., (aug)-cc-pVTZ) are necessary for molecular clusters. For these larger basis sets, we show the very high efficiency of our scheme. We obtain not only tremendous decreases of the wall times (i.e., factors >10 2 ) due to the parallelization of the increment calculations as well as of the total times due to the application of PNOs (i.e., compared to the normal incremental scheme) but also smaller total times with respect to the standard PNO method. That way, our new method features a perfect applicability by combining an excellent accuracy with a very high efficiency as well as the accessibility to larger systems due to the separation of the full computation into several small increments.

Lines of Evidence–Incremental Markings in Molar Enamel of Soay Sheep as Revealed by a Fluorochrome Labeling and Backscattered Electron Imaging Study

PubMed Central

Kierdorf, Horst; Kierdorf, Uwe; Frölich, Kai; Witzel, Carsten

2013-01-01

We studied the structural characteristics and periodicities of regular incremental markings in sheep enamel using fluorochrome injections for vital labeling of forming enamel and backscattered electron imaging in the scanning electron microscope. Microscopic analysis of mandibular first molars revealed the presence of incremental markings with a daily periodicity (laminations) that indicated successive positions of the forming front of interprismatic enamel. In addition to the laminations, incremental markings with a sub-daily periodicity were discernible both in interprismatic enamel and in enamel prisms. Five sub-daily increments were present between two consecutive laminations. Backscattered electron imaging revealed that each sub-daily growth increment consisted of a broader and more highly mineralized band and a narrower and less mineralized band (line). The sub-daily markings in the prisms of sheep enamel morphologically resembled the (daily) prisms cross striations seen in primate enamel. Incremental markings with a supra-daily periodicity were not observed in sheep enamel. Based on the periodicity of the incremental markings, maximum mean daily apposition rates of 17.0 µm in buccal enamel and of 13.4 µm in lingual enamel were recorded. Enamel extension rates were also high, with maximum means of 180 µm/day and 217 µm/day in upper crown areas of buccal and lingual enamel, respectively. Values in more cervical crown portions were markedly lower. Our results are in accordance with previous findings in other ungulate species. Using the incremental markings present in primate enamel as a reference could result in a misinterpretation of the incremental markings in ungulate enamel. Thus, the sub-daily growth increments in the prisms of ungulate enamel might be mistaken as prism cross striations with a daily periodicity, and the laminations misidentified as striae of Retzius with a supra-daily periodicity. This would lead to a considerable overestimation of crown formation times in ungulate teeth. PMID:24040293

An incremental strategy for calculating consistent discrete CFD sensitivity derivatives

NASA Technical Reports Server (NTRS)

Korivi, Vamshi Mohan; Taylor, Arthur C., III; Newman, Perry A.; Hou, Gene W.; Jones, Henry E.

1992-01-01

In this preliminary study involving advanced computational fluid dynamic (CFD) codes, an incremental formulation, also known as the 'delta' or 'correction' form, is presented for solving the very large sparse systems of linear equations which are associated with aerodynamic sensitivity analysis. For typical problems in 2D, a direct solution method can be applied to these linear equations which are associated with aerodynamic sensitivity analysis. For typical problems in 2D, a direct solution method can be applied to these linear equations in either the standard or the incremental form, in which case the two are equivalent. Iterative methods appear to be needed for future 3D applications; however, because direct solver methods require much more computer memory than is currently available. Iterative methods for solving these equations in the standard form result in certain difficulties, such as ill-conditioning of the coefficient matrix, which can be overcome when these equations are cast in the incremental form; these and other benefits are discussed. The methodology is successfully implemented and tested in 2D using an upwind, cell-centered, finite volume formulation applied to the thin-layer Navier-Stokes equations. Results are presented for two laminar sample problems: (1) transonic flow through a double-throat nozzle; and (2) flow over an isolated airfoil.

Validation of daily increments in otoliths of northern squawfish larvae

USGS Publications Warehouse

Wertheimer, R.H.; Barfoot, C.A.

1998-01-01

Otoliths from laboratory-reared northern squawfish, Ptychocheilus oregonensis, larvae were examined to determine the periodicity of increment deposition. Increment deposition began in both sagittae and lapilli after hatching. Reader counts indicated that increment formation was daily in sagittae of 1-29-day-old larvae. However, increment counts from lapilli were significantly less than the known ages of northern squawfish larvae, possibly because some increments were not detectable. Otolith readability and age agreement among readers were greatest for young (<11 days) northern squawfish larvae. This was primarily because a transitional zone of low-contrast material began forming in otoliths of 8-11-day-old larvae and persisted until approximately 20 days after hatching. Formation of the transition zone appeared to coincide with the onset of exogenous feeding and continued through yolk sac absorption. Our results indicate that aging wild-caught northern squawfish larvae using daily otolith increment counts is possible.

[Spatiotemporal variation of Populus euphratica's radial increment at lower reaches of Tarim River after ecological water transfer].

PubMed

An, Hong-Yan; Xu, Hai-Liang; Ye, Mao; Yu, Pu-Ji; Gong, Jun-Jun

2011-01-01

Taking the Populus euphratica at lower reaches of Tarim River as test object, and by the methods of tree dendrohydrology, this paper studied the spatiotemporal variation of P. euphratic' s branch radial increment after ecological water transfer. There was a significant difference in the mean radial increment before and after ecological water transfer. The radial increment after the eco-water transfer was increased by 125%, compared with that before the water transfer. During the period of ecological water transfer, the radial increment was increased with increasing water transfer quantity, and there was a positive correlation between the annual radial increment and the total water transfer quantity (R2 = 0.394), suggesting that the radial increment of P. euphratica could be taken as the performance indicator of ecological water transfer. After the ecological water transfer, the radial increment changed greatly with the distance to the River, i.e. , decreased significantly along with the increasing distance to the River (P = 0.007). The P. euphratic' s branch radial increment also differed with stream segment (P = 0.017 ), i.e. , the closer to the head-water point (Daxihaizi Reservoir), the greater the branch radial increment. It was considered that the limited effect of the current ecological water transfer could scarcely change the continually deteriorating situation of the lower reaches of Tarim River.

Finite element simulation and Experimental verification of Incremental Sheet metal Forming

NASA Astrophysics Data System (ADS)

Kaushik Yanamundra, Krishna; Karthikeyan, R., Dr.; Naranje, Vishal, Dr

2018-04-01

Incremental sheet metal forming is now a proven manufacturing technique that can be employed to obtain application specific, customized, symmetric or asymmetric shapes that are required by automobile or biomedical industries for specific purposes like car body parts, dental implants or knee implants. Finite element simulation of metal forming process is being performed successfully using explicit dynamics analysis of commercial FE software. The simulation is mainly useful in optimization of the process as well design of the final product. This paper focuses on simulating the incremental sheet metal forming process in ABAQUS, and validating the results using experimental methods. The shapes generated for testing are of trapezoid, dome and elliptical shapes whose G codes are written and fed into the CNC milling machine with an attached forming tool with a hemispherical bottom. The same pre-generated coordinates are used to simulate a similar machining conditions in ABAQUS and the tool forces, stresses and strains in the workpiece while machining are obtained as the output data. The forces experimentally were recorded using a dynamometer. The experimental and simulated results were then compared and thus conclusions were drawn.

Per tree estimates with n-tree distance sampling: an application to increment core data

Treesearch

Thomas B. Lynch; Robert F. Wittwer

2002-01-01

Per tree estimates using the n trees nearest a point can be obtained by using a ratio of per unit area estimates from n-tree distance sampling. This ratio was used to estimate average age by d.b.h. classes for cottonwood trees (Populus deltoides Bartr. ex Marsh.) on the Cimarron National Grassland. Increment...

Experimental and Petrological Constraints on Lunar Differentiation from the Apollo 15 Green Picritic Glasses

NASA Technical Reports Server (NTRS)

Elkins-Tanton, Linda T.; Chatterjee, Nilanjan; Grove, Timothy L.

2003-01-01

Phase equilibrium experiments on the most magnesian Apollo 15C green picritic glass composition indicate a multiple saturation point with olivine and orthopyroxene at 1520 C and 1.3 GPa (about 260 km depth in the moon). This composition has the highest Mg# of any lunar picritic glass and the shallowest multiple saturation point. Experiments on an Apollo 15A composition indicate a multiple saturation point with olivine and orthopyroxene at 1520 C and 2.2 GPa (about 440 km depth in the moon). The importance of the distinctive compositional trends of the Apollo 15 groups A, B, and C picritic glasses merits the reanalysis of NASA slide 15426,72 with modern electron microprobe techniques. We confirm the compositional trends reported by Delano (1979, 1986) in the major element oxides SiO2, TiO2, Al2O3, Cr2O3, FeO, MnO, MgO, and CaO, and we also obtained data for the trace elements P2O5, K2O, Na2O, NiO, S, Cu, Cl, Zn, and F. Petrogenetic modeling demonstrates that the Apollo 15 A-B-C glass trends could not have been formed by fractional crystallization or any continuous assimilation/fractional crystallization (AFC) process. The B and C glass compositional trends could not have been formed by batch or incremental melting of an olivine + orthopyroxene source or any other homogeneous source, though the A glasses may have been formed by congruent melting over a small pressure range at depth. The B compositional trend is well modeled by starting with an intermediate A composition and assimilating a shallower, melted cumulate, and the C compositional trend is well modeled by a second assimilation event. The assimilation process envisioned is one in which heat and mass transfer were separated in space and time. In an initial intrusive event, a picritic magma crystallized and provided heat to melt magma ocean cumulates. In a later replenishment event, the picritic magma incrementally mixed with the melted cumulate (creating the compositional trends in the green glass data set), ascended to the lunar surface, and erupted as a fire fountain. A barometer created from multiple saturation points provides a depth estimate of other glasses in the A-B-C trend and of the depths of assimilation. This barometer demonstrates that the Apollo 15 A-B-C trend originated over a depth range of approx.460 km to approx.260 km within the moon.

Vaccinating Girls and Boys with Different Human Papillomavirus Vaccines: Can It Optimise Population-Level Effectiveness?

PubMed Central

Drolet, Mélanie; Boily, Marie-Claude; Van de Velde, Nicolas; Franco, Eduardo L.; Brisson, Marc

2013-01-01

Background Decision-makers may consider vaccinating girls and boys with different HPV vaccines to benefit from their respective strengths; the quadrivalent (HPV4) prevents anogenital warts (AGW) whilst the bivalent (HPV2) may confer greater cross-protection. We compared, to a girls-only vaccination program with HPV4, the impact of vaccinating: 1) both genders with HPV4, and 2) boys with HPV4 and girls with HPV2. Methods We used an individual-based transmission-dynamic model of heterosexual HPV infection and diseases. Our base-case scenario assumed lifelong efficacy of 100% against vaccine types, and 46,29,8,18,6% and 77,43,79,8,0% efficacy against HPV-31,-33,-45,-52,-58 for HPV4 and HPV2, respectively. Results Assuming 70% vaccination coverage and lifelong cross-protection, vaccinating boys has little additional benefit on AGW prevention, irrespective of the vaccine used for girls. Furthermore, using HPV4 for boys and HPV2 for girls produces greater incremental reductions in SCC incidence than using HPV4 for both genders (12 vs 7 percentage points). At 50% vaccination coverage, vaccinating boys produces incremental reductions in AGW of 17 percentage points if both genders are vaccinated with HPV4, but increases female incidence by 16 percentage points if girls are switched to HPV2 (heterosexual male incidence is incrementally reduced by 24 percentage points in both scenarios). Higher incremental reductions in SCC incidence are predicted when vaccinating boys with HPV4 and girls with HPV2 versus vaccinating both genders with HPV4 (16 vs 12 percentage points). Results are sensitive to vaccination coverage and the relative duration of protection of the vaccines. Conclusion Vaccinating girls with HPV2 and boys with HPV4 can optimize SCC prevention if HPV2 has higher/longer cross-protection, but can increase AGW incidence if vaccination coverage is low among boys. PMID:23840589

Vaccinating Girls and Boys with Different Human Papillomavirus Vaccines: Can It Optimise Population-Level Effectiveness?

PubMed

Drolet, Mélanie; Boily, Marie-Claude; Van de Velde, Nicolas; Franco, Eduardo L; Brisson, Marc

2013-01-01

Decision-makers may consider vaccinating girls and boys with different HPV vaccines to benefit from their respective strengths; the quadrivalent (HPV4) prevents anogenital warts (AGW) whilst the bivalent (HPV2) may confer greater cross-protection. We compared, to a girls-only vaccination program with HPV4, the impact of vaccinating: 1) both genders with HPV4, and 2) boys with HPV4 and girls with HPV2. We used an individual-based transmission-dynamic model of heterosexual HPV infection and diseases. Our base-case scenario assumed lifelong efficacy of 100% against vaccine types, and 46,29,8,18,6% and 77,43,79,8,0% efficacy against HPV-31,-33,-45,-52,-58 for HPV4 and HPV2, respectively. Assuming 70% vaccination coverage and lifelong cross-protection, vaccinating boys has little additional benefit on AGW prevention, irrespective of the vaccine used for girls. Furthermore, using HPV4 for boys and HPV2 for girls produces greater incremental reductions in SCC incidence than using HPV4 for both genders (12 vs 7 percentage points). At 50% vaccination coverage, vaccinating boys produces incremental reductions in AGW of 17 percentage points if both genders are vaccinated with HPV4, but increases female incidence by 16 percentage points if girls are switched to HPV2 (heterosexual male incidence is incrementally reduced by 24 percentage points in both scenarios). Higher incremental reductions in SCC incidence are predicted when vaccinating boys with HPV4 and girls with HPV2 versus vaccinating both genders with HPV4 (16 vs 12 percentage points). Results are sensitive to vaccination coverage and the relative duration of protection of the vaccines. Vaccinating girls with HPV2 and boys with HPV4 can optimize SCC prevention if HPV2 has higher/longer cross-protection, but can increase AGW incidence if vaccination coverage is low among boys.

Reducing workpieces to their base geometry for multi-step incremental forming using manifold harmonics

NASA Astrophysics Data System (ADS)

Carette, Yannick; Vanhove, Hans; Duflou, Joost

2018-05-01

Single Point Incremental Forming is a flexible process that is well-suited for small batch production and rapid prototyping of complex sheet metal parts. The distributed nature of the deformation process and the unsupported sheet imply that controlling the final accuracy of the workpiece is challenging. To improve the process limits and the accuracy of SPIF, the use of multiple forming passes has been proposed and discussed by a number of authors. Most methods use multiple intermediate models, where the previous one is strictly smaller than the next one, while gradually increasing the workpieces' wall angles. Another method that can be used is the manufacture of a smoothed-out "base geometry" in the first pass, after which more detailed features can be added in subsequent passes. In both methods, the selection of these intermediate shapes is freely decided by the user. However, their practical implementation in the production of complex freeform parts is not straightforward. The original CAD model can be manually adjusted or completely new CAD models can be created. This paper discusses an automatic method that is able to extract the base geometry from a full STL-based CAD model in an analytical way. Harmonic decomposition is used to express the final geometry as the sum of individual surface harmonics. It is then possible to filter these harmonic contributions to obtain a new CAD model with a desired level of geometric detail. This paper explains the technique and its implementation, as well as its use in the automatic generation of multi-step geometries.

Radial-rotation profile forming: A new processing technology of incremental sheet metal forming

NASA Astrophysics Data System (ADS)

Laue, Robert; Härtel, Sebastian; Awiszus, Birgit

2018-05-01

Incremental forming processes (i.e., spinning) of sheet metal blanks into cylindrical cups are suitable for lower lot sizes. The produced cups were frequently used as preforms to produce workpieces in further forming steps with additional functions like profiled hollow parts [1]. The incremental forming process radial-rotation profile forming has been developed to enable the production of profiled hollow parts with low sheet thinning and good geometrical accuracy. The two principal forming steps are the production of the preform by rotational swing-folding [2] and the subsequent radial profiling of the hollow part in one clamping position. The rotational swing-folding process is based on a combination of conventional spinning and swing-folding. Therefore, a round blank rotates on a profiled mandrel and due to the swinging of a cylindrical forming tool, the blank is formed to a cup with low sheet thinning. In addition, thickening results at the edge of the blank and wrinkling occurs. However, the wrinkles are formed into the indentation of the profiled mandrel and can be reshaped as an advantage in the second process step, the radial profiling. Due to the rotation and continuous radial feed of a profiled forming tool to the profiled mandrel, the axial profile is formed in the second process step. Because of the minor relative movement in axial direction between tool and blank, low sheet thinning occurs. This is an advantage of the principle of the process.

Methodology for Sensitivity Analysis, Approximate Analysis, and Design Optimization in CFD for Multidisciplinary Applications

NASA Technical Reports Server (NTRS)

Taylor, Arthur C., III; Hou, Gene W.

1996-01-01

An incremental iterative formulation together with the well-known spatially split approximate-factorization algorithm, is presented for solving the large, sparse systems of linear equations that are associated with aerodynamic sensitivity analysis. This formulation is also known as the 'delta' or 'correction' form. For the smaller two dimensional problems, a direct method can be applied to solve these linear equations in either the standard or the incremental form, in which case the two are equivalent. However, iterative methods are needed for larger two-dimensional and three dimensional applications because direct methods require more computer memory than is currently available. Iterative methods for solving these equations in the standard form are generally unsatisfactory due to an ill-conditioned coefficient matrix; this problem is overcome when these equations are cast in the incremental form. The methodology is successfully implemented and tested using an upwind cell-centered finite-volume formulation applied in two dimensions to the thin-layer Navier-Stokes equations for external flow over an airfoil. In three dimensions this methodology is demonstrated with a marching-solution algorithm for the Euler equations to calculate supersonic flow over the High-Speed Civil Transport configuration (HSCT 24E). The sensitivity derivatives obtained with the incremental iterative method from a marching Euler code are used in a design-improvement study of the HSCT configuration that involves thickness. camber, and planform design variables.

The Cost-Effectiveness of Using PARO, a Therapeutic Robotic Seal, to Reduce Agitation and Medication Use in Dementia: Findings from a Cluster-Randomized Controlled Trial.

PubMed

Mervin, Merehau C; Moyle, Wendy; Jones, Cindy; Murfield, Jenny; Draper, Brian; Beattie, Elizabeth; Shum, David H K; O'Dwyer, Siobhan; Thalib, Lukman

2018-01-09

To examine the within-trial costs and cost-effectiveness of using PARO, compared with a plush toy and usual care, for reducing agitation and medication use in people with dementia in long-term care. An economic evaluation, nested within a cluster-randomized controlled trial. Twenty-eight facilities in South-East Queensland, Australia. A total of 415 residents, all aged 60 years or older, with documented diagnoses of dementia. Facilities were randomized to 1 of 3 groups: PARO (individual, nonfacilitated 15-minute sessions, 3 afternoons per week for 10 weeks); plush toy (as per PARO but with artificial intelligence disabled); and usual care. The incremental cost per Cohen-Mansfield Agitation Inventory-Short Form (CMAI-SF) point averted from a provider's perspective. Australian New Zealand Clinical Trials Registry (BLINDED FOR REVIEW). For the within-trial costs, the PARO group was $50.47 more expensive per resident compared with usual care, whereas the plush toy group was $37.26 more expensive than usual care. There were no statistically significant between-group differences in agitation levels after the 10-week intervention. The point estimates of the incremental cost-effectiveness ratios were $13.01 for PARO and $12.85 for plush toy per CMAI-SF point averted relative to usual care. The plush toy used in this study offered marginally greater value for money than PARO in improving agitation. However, these costs are much lower than values estimated for psychosocial group activities and sensory interventions, suggesting that both a plush toy and the PARO are cost-effective psychosocial treatment options for agitation. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Augmenting responses evoked in area 17 of the cat by intracortical axon collaterals of cortico-geniculate cells.

PubMed Central

Ferster, D; Lindström, S

1985-01-01

Evoked potentials were recorded in the visual cortex of the cat after electrical stimulation of the lateral geniculate nucleus (l.g.n.). The primary response, mediated by geniculo-cortical fibres, was depressed at stimulation frequencies above 7 Hz and replaced by a late potential, the incremental response, which gradually increased in amplitude with successive stimuli. The incremental response was a negative-positive potential in the depth of the cortex with the negative component having maximal amplitude in layer 4. The response reversed polarity in layer 1 to become a positive-negative potential at the surface. The latency of the negative component of the incremental response was about 3.5-4 ms in layer 4, compared to about 1.5 and 2.5 ms for the mono- and disynaptic components of the primary response. The incremental response could only be evoked from the l.g.n. and the optic radiation, not from the optic tract, superior colliculus or other surrounding structures. Within the l.g.n., the effect was only evoked from stimulation sites in approximate retinotopic register with the recording site in the cortex. Low threshold points were found in the A laminae, completely overlapping with the low threshold points for the primary response. Thresholds increased steeply when the stimulation electrode was lowered into the C laminae. The incremental response could still be evoked ten days after the destruction of all cells in the l.g.n. complex by kainic acid. It is concluded that the described incremental response is identical to the augmenting response of Dempsey & Morison (1943) and is mediated by intracortical axon collaterals of antidromically activated cortico-geniculate neurones. Images Plate 1 PMID:4057097

On the effect of incremental forming on alpha phase precipitation and mechanical behavior of beta-Ti-10V-2Fe-3Al

NASA Astrophysics Data System (ADS)

Winter, S.; F-X Wagner, M.

2016-03-01

A combination of good ductility and fatigue resistance makes β-titanium alloys interesting for many current and potential future applications. The mechanical behavior is primarily determined by microstructural parameters like (beta phase) grain size, morphology and volume fraction of primary / secondary α-phase precipitates, and this allows changing and optimizing their mechanical properties across a wide range. In this study, we investigate the possibility to modify the microstructure of the high-strength beta titanium alloy Ti-10V-2Fe-3Al, with a special focus on shape and volume fraction of primary α-phase. In addition to the conventional strategy for precipitation of primary α, a special thermo-mechanical processing is performed; this processing route combines the conventional heat treatment with incremental forming during the primary α-phase annealing. After incremental forming, considerable variations in terms of microstructure and mechanical properties can be obtained for different thermo-mechanical processing routes. The microstructures of the deformed samples are characterized by globular as well as lamellar (bimodal) α precipitates, whereas conventional annealing only results in the formation of lamellar precipitates. Because of the smaller size, and the lower amount, of α-phase after incremental forming, tensile strength is not as high as after the conventional strategy. However, high amounts of grain boundary α and lamellar αp-phase in the undeformed samples lead to a significantly lower ductility in comparison to the matrix with bimodal structures obtained by thermo-mechanical processing. These results illustrate the potential of incremental forming during the annealing to modify the microstructure of the beta titanium Ti-10V-2Fe-3Al in a wide range of volume fractions and morphologies of the primary α phase, which in turn leads to considerably changes, and improved, mechanical properties.

A Robust Shape Reconstruction Method for Facial Feature Point Detection.

PubMed

Tan, Shuqiu; Chen, Dongyi; Guo, Chenggang; Huang, Zhiqi

2017-01-01

Facial feature point detection has been receiving great research advances in recent years. Numerous methods have been developed and applied in practical face analysis systems. However, it is still a quite challenging task because of the large variability in expression and gestures and the existence of occlusions in real-world photo shoot. In this paper, we present a robust sparse reconstruction method for the face alignment problems. Instead of a direct regression between the feature space and the shape space, the concept of shape increment reconstruction is introduced. Moreover, a set of coupled overcomplete dictionaries termed the shape increment dictionary and the local appearance dictionary are learned in a regressive manner to select robust features and fit shape increments. Additionally, to make the learned model more generalized, we select the best matched parameter set through extensive validation tests. Experimental results on three public datasets demonstrate that the proposed method achieves a better robustness over the state-of-the-art methods.

SfM with MRFs: discrete-continuous optimization for large-scale structure from motion.

PubMed

Crandall, David J; Owens, Andrew; Snavely, Noah; Huttenlocher, Daniel P

2013-12-01

Recent work in structure from motion (SfM) has built 3D models from large collections of images downloaded from the Internet. Many approaches to this problem use incremental algorithms that solve progressively larger bundle adjustment problems. These incremental techniques scale poorly as the image collection grows, and can suffer from drift or local minima. We present an alternative framework for SfM based on finding a coarse initial solution using hybrid discrete-continuous optimization and then improving that solution using bundle adjustment. The initial optimization step uses a discrete Markov random field (MRF) formulation, coupled with a continuous Levenberg-Marquardt refinement. The formulation naturally incorporates various sources of information about both the cameras and points, including noisy geotags and vanishing point (VP) estimates. We test our method on several large-scale photo collections, including one with measured camera positions, and show that it produces models that are similar to or better than those produced by incremental bundle adjustment, but more robustly and in a fraction of the time.

Sensitivity of finite helical axis parameters to temporally varying realistic motion utilizing an idealized knee model.

PubMed

Johnson, T S; Andriacchi, T P; Erdman, A G

2004-01-01

Various uses of the screw or helical axis have previously been reported in the literature in an attempt to quantify the complex displacements and coupled rotations of in vivo human knee kinematics. Multiple methods have been used by previous authors to calculate the axis parameters, and it has been theorized that the mathematical stability and accuracy of the finite helical axis (FHA) is highly dependent on experimental variability and rotation increment spacing between axis calculations. Previous research has not addressed the sensitivity of the FHA for true in vivo data collection, as required for gait laboratory analysis. This research presents a controlled series of experiments simulating continuous data collection as utilized in gait analysis to investigate the sensitivity of the three-dimensional finite screw axis parameters of rotation, displacement, orientation and location with regard to time step increment spacing, utilizing two different methods for spatial location. Six-degree-of-freedom motion parameters are measured for an idealized rigid body knee model that is constrained to a planar motion profile for the purposes of error analysis. The kinematic data are collected using a multicamera optoelectronic system combined with an error minimization algorithm known as the point cluster method. Rotation about the screw axis is seen to be repeatable, accurate and time step increment insensitive. Displacement along the axis is highly dependent on time step increment sizing, with smaller rotation angles between calculations producing more accuracy. Orientation of the axis in space is accurate with only a slight filtering effect noticed during motion reversal. Locating the screw axis by a projected point onto the screw axis from the mid-point of the finite displacement is found to be less sensitive to motion reversal than finding the intersection of the axis with a reference plane. A filtering effect of the spatial location parameters was noted for larger time step increments during periods of little or no rotation.

The Cognitive Underpinnings of Incremental Rehearsal

ERIC Educational Resources Information Center

Varma, Sashank; Schleisman, Katrina B.

2014-01-01

Incremental rehearsal (IR) is a flashcard technique that has been developed and evaluated by school psychologists. We discuss potential learning and memory effects from cognitive psychology that may explain the observed superiority of IR over other flashcard techniques. First, we propose that IR is a form of "spaced practice" that…

Just-in-Time Technology to Encourage Incremental, Dietary Behavior Change

PubMed Central

Intille, Stephen S.; Kukla, Charles; Farzanfar, Ramesh; Bakr, Waseem

2003-01-01

Our multi-disciplinary team is developing mobile computing software that uses “just-in-time” presentation of information to motivate behavior change. Using a participatory design process, preliminary interviews have helped us to establish 10 design goals. We have employed some to create a prototype of a tool that encourages better dietary decision making through incremental, just-in-time motivation at the point of purchase. PMID:14728379

SAMS Acceleration Measurements on Mir from May 1997 to June 1998 (NASA Increments 5, 6, and 7)

NASA Technical Reports Server (NTRS)

DeLombard, Richard

1999-01-01

During NASA Increments 5, 6, and 7 (May 1997 to June 1998), about eight gigabytes of acceleration data were collected by the Space Acceleration Measurement System (SAMS) onboard the Russian Space Station Mir. The data were recorded on twenty-seven optical disks which were returned to Earth on Orbiter missions STS-86, STS-89, and STS-91. During these increments, SAMS data were collected in the Priroda module to support various microgravity experiments. This report points out some of the salient features of the microgravity acceleration environment to which the experiments were exposed. This report presents an overview of the SAMS acceleration measurements recorded by 10 Hz and 100 Hz sensor heads. The analyses included herein complement those presented in previous Mir increment summary reports prepared by the Principal Investigator Microgravity Services project.

Martingales, nonstationary increments, and the efficient market hypothesis

NASA Astrophysics Data System (ADS)

McCauley, Joseph L.; Bassler, Kevin E.; Gunaratne, Gemunu H.

2008-06-01

We discuss the deep connection between nonstationary increments, martingales, and the efficient market hypothesis for stochastic processes x(t) with arbitrary diffusion coefficients D(x,t). We explain why a test for a martingale is generally a test for uncorrelated increments. We explain why martingales look Markovian at the level of both simple averages and 2-point correlations. But while a Markovian market has no memory to exploit and cannot be beaten systematically, a martingale admits memory that might be exploitable in higher order correlations. We also use the analysis of this paper to correct a misstatement of the ‘fair game’ condition in terms of serial correlations in Fama’s paper on the EMH. We emphasize that the use of the log increment as a variable in data analysis generates spurious fat tails and spurious Hurst exponents.

Analytic description of the frictionally engaged in-plane bending process incremental swivel bending (ISB)

NASA Astrophysics Data System (ADS)

Frohn, Peter; Engel, Bernd; Groth, Sebastian

2018-05-01

Kinematic forming processes shape geometries by the process parameters to achieve a more universal process utilizations regarding geometric configurations. The kinematic forming process Incremental Swivel Bending (ISB) bends sheet metal strips or profiles in plane. The sequence for bending an arc increment is composed of the steps clamping, bending, force release and feed. The bending moment is frictionally engaged by two clamping units in a laterally adjustable bending pivot. A minimum clamping force hindering the material from slipping through the clamping units is a crucial criterion to achieve a well-defined incremental arc. Therefore, an analytic description of a singular bent increment is developed in this paper. The bending moment is calculated by the uniaxial stress distribution over the profiles' width depending on the bending pivot's position. By a Coulomb' based friction model, necessary clamping force is described in dependence of friction, offset, dimensions of the clamping tools and strip thickness as well as material parameters. Boundaries for the uniaxial stress calculation are given in dependence of friction, tools' dimensions and strip thickness. The results indicate that changing the bending pivot to an eccentric position significantly affects the process' bending moment and, hence, clamping force, which is given in dependence of yield stress and hardening exponent. FE simulations validate the model with satisfactory accordance.

Lift hysteresis at stall as an unsteady boundary-layer phenomenon

NASA Technical Reports Server (NTRS)

Moore, Franklin K

1956-01-01

Analysis of rotating stall of compressor blade rows requires specification of a dynamic lift curve for the airfoil section at or near stall, presumably including the effect of lift hysteresis. Consideration of the magnus lift of a rotating cylinder suggests performing an unsteady boundary-layer calculation to find the movement of the separation points of an airfoil fixed in a stream of variable incidence. The consideration of the shedding of vorticity into the wake should yield an estimate of lift increment proportional to time rate of change of angle of attack. This increment is the amplitude of the hysteresis loop. An approximate analysis is carried out according to the foregoing ideas for a 6:1 elliptic airfoil at the angle of attack for maximum lift. The assumptions of small perturbations from maximum lift are made, permitting neglect of distributed vorticity in the wake. The calculated hysteresis loop is counterclockwise. Finally, a discussion of the forms of hysteresis loops is presented; and, for small reduced frequency of oscillation, it is concluded that the concept of a viscous "time lag" is appropriate only for harmonic variations of angle of attack with time at mean conditions other than maximum lift.

49 CFR 639.15 - Eligible forms of grant.

Code of Federal Regulations, 2010 CFR

2010-10-01

... increments that are obligated by FTA periodically (usually in annual section 9 grants). In this case, a recipient— (1) Must certify to FTA that it has the financial capacity to meet its future obligations under... (2) May incur costs under its lease before FTA's obligation of future increments of funding for such...

Handbook of Thermal Insulation Applications.

DTIC Science & Technology

1983-01-01

today. Every $10 spent on conservation would save at least I barrel of oil - equivalent * to buying oil at $10 a barrel. In recent years, energy...there exists some point at which’more would be spent for an increment of insulation than could ever be saved by that increment. By adding the...TO ACIDS, CAUSTICS , AND SOLVENTS: The property of a material to resist decomposition by various acids, caustics and solvents to which it may be

Performance analysis of ‘Perturb and Observe’ and ‘Incremental Conductance’ MPPT algorithms for PV system

NASA Astrophysics Data System (ADS)

Lodhi, Ehtisham; Lodhi, Zeeshan; Noman Shafqat, Rana; Chen, Fieda

2017-07-01

Photovoltaic (PV) system usually employed The Maximum power point tracking (MPPT) techniques for increasing its efficiency. The performance of the PV system perhaps boosts by controlling at its apex point of power, in this way maximal power can be given to load. The proficiency of a PV system usually depends upon irradiance, temperature and array architecture. PV array shows a non-linear style for V-I curve and maximal power point on V-P curve also varies with changing environmental conditions. MPPT methods grantees that a PV module is regulated at reference voltage and to produce entire usage of the maximal output power. This paper gives analysis between two widely employed Perturb and Observe (P&O) and Incremental Conductance (INC) MPPT techniques. Their performance is evaluated and compared through theoretical analysis and digital simulation on the basis of response time and efficiency under varying irradiance and temperature condition using Matlab/Simulink.

A line-scan hyperspectral Raman system for spatially offset Raman spectroscopy

USDA-ARS?s Scientific Manuscript database

Conventional methods of spatially offset Raman spectroscopy (SORS) typically use single-fiber optical measurement probes to slowly and incrementally collect a series of spatially offset point measurements moving away from the laser excitation point on the sample surface, or arrays of multiple fiber ...

Cumulative Effect of Racial Discrimination on the Mental Health of Ethnic Minorities in the United Kingdom.

PubMed

Wallace, Stephanie; Nazroo, James; Bécares, Laia

2016-07-01

To examine the longitudinal association between cumulative exposure to racial discrimination and changes in the mental health of ethnic minority people. We used data from 4 waves (2009-2013) of the UK Household Longitudinal Study, a longitudinal household panel survey of approximately 40 000 households, including an ethnic minority boost sample of approximately 4000 households. Ethnic minority people who reported exposure to racial discrimination at 1 time point had 12-Item Short Form Health Survey (SF-12) mental component scores 1.93 (95% confidence interval [CI] = -3.31, -0.56) points lower than did those who reported no exposure to racial discrimination, whereas those who had been exposed to 2 or more domains of racial discrimination, at 2 different time points, had SF-12 mental component scores 8.26 (95% CI = -13.33, -3.18) points lower than did those who reported no experiences of racial discrimination. Controlling for racial discrimination and other socioeconomic factors reduced ethnic inequalities in mental health. Cumulative exposure to racial discrimination has incremental negative long-term effects on the mental health of ethnic minority people in the United Kingdom. Studies that examine exposure to racial discrimination at 1 point in time may underestimate the contribution of racism to poor health.

Numerical study of multi-point forming of thick sheet using remeshing procedure

NASA Astrophysics Data System (ADS)

Cherouat, A.; Ma, X.; Borouchaki, H.; Zhang, Q.

2018-05-01

Multi-point forming MPF is an innovative technology of manufacturing complex thick sheet metal products without the need for solid tools. The central component of this system is a pair of the desired discrete matrices of punches, and die surface constructed by changing the positions of the tools though CAD and a control system. Because reconfigurable discrete tools are used, part-manufacturing costs are reduced and manufacturing time is shorten substantially. Firstly, in this work we develop constitutive equations which couples isotropic ductile damage into various flow stress based on the Continuum Damage Mechanic theory. The modified Johnson-Cook flow model fully coupled with an isotropic ductile damage is established using the quasi-unilateral damage evolution for considering both the open and the close of micro-cracks. During the forming processes severe mesh distortion of elements occur after a few incremental forming steps. Secondly, we introduce 3D adaptive remeshing procedure based on linear tetrahedral element and geometrical/physical errors estimation to optimize the element quality, to refine the mesh size in the whole model and to adapt the deformed mesh to the tools geometry. Simulation of the MPF process (see Fig. 1) and the unloading spring-back are carried out using adaptive remeshing scheme using the commercial finite element package ABAQUS and OPTIFORM mesher. Subsequently, influencing factors of MPF spring-back are researched to investigate the MPF spring-back tendency with the proposed remeshing procedure.

CARIBIAM: constrained Association Rules using Interactive Biological IncrementAl Mining.

PubMed

Rahal, Imad; Rahhal, Riad; Wang, Baoying; Perrizo, William

2008-01-01

This paper analyses annotated genome data by applying a very central data-mining technique known as Association Rule Mining (ARM) with the aim of discovering rules and hypotheses capable of yielding deeper insights into this type of data. In the literature, ARM has been noted for producing an overwhelming number of rules. This work proposes a new technique capable of using domain knowledge in the form of queries in order to efficiently mine only the subset of the associations that are of interest to investigators in an incremental and interactive manner.

Simulations to Predict the Phase Behavior and Structure of Multipolar Colloidal Particles

NASA Astrophysics Data System (ADS)

Rutkowski, David Matthew

Colloidal particles with anisotropic charge distributions can assemble into a number of interesting structures including chains, lattices and micelles that could be useful in biotechnology, optics and electronics. The goal of this work is to understand how the properties of the colloidal particles, such as their charge distribution or shape, affect the selfassembly and phase behavior of collections of such particles. The specific aim of this work is to understand how the separation between a pair of oppositely signed charges affects the phase behavior and structure of assemblies of colloidal particles. To examine these particles, we have used both discontinuous molecular dynamics (DMD) and Monte Carlo (MC) simulation techniques. In our first study of colloidal particles with finite charge separation, we simulate systems of 2-D colloidal rods with four possible charge separations. Our simulations show that the charge separation does indeed have a large effect on the phase behavior as can be seen in the phase diagrams we construct for these four systems in the area fraction-reduced temperature plane. The phase diagrams delineate the boundaries between isotropic fluid, string-fluid and percolated fluid for all systems considered. In particular, we find that coarse gel-like structures tend to form at large charge separations while denser aggregates form at small charge separations, suggesting a route to forming low volume gels by focusing on systems with large charge separations. Next we examine systems of circular particles with four embedded charges of alternating sign fixed to a triangular lattice. This system is found to form a limit periodic structure, a theoretical structure with an infinite number of phase transitions, under specific conditions. The limit-periodic structure only forms when the rotation of the particles in the system is restricted to increments of pi/3. When the rotation is restricted to increments of th/6 or the rotation is continuous, related structures form including a striped phase and a phase with nematic order. Neither the distance from the point charges to the center of the particle nor the angle between the charges influences whether the system forms a limit-periodic structure, suggesting that point quadrupoles may also be able to form limit-periodic structures. Results from these simulations will likely aid in the quest to find an experimental realization of a limit-periodic structure. Next we examine the effect of charge separation on the self-assembly of systems of 2-D colloidal particles with off-center extended dipoles. We simulate systems with both small and large charge separations for a set of displacements of the dipole from the particle center. Upon cooling, these particles self-assemble into closed, cyclic structures at large displacements including dimers, triangular shapes and square shapes, and chain-like structures at small displacements. At extremely low temperatures, the cyclic structures form interesting lattices with particles of similar chirality grouped together. Results from this work could aid in the experimental construction of open lattice-like structures that could find use in photonic applications. Finally, we present work in collaboration with Drs. Bhuvnesh Bharti and Orlin Velev in which we investigate how the surface coverage affects the self-assembly of systems of Janus particles coated with both an iron oxide and fatty acid chain layer. We model these particles by decorating a sphere with evenly dispersed points that interact with points on other spheres through square-well interactions. The interactions are designed to mimic specific coverage values for the iron oxide/fatty acid chain layer. Structures similar to those found in experiment form readily in the simulations. The number of clusters formed as a function of surface coverage agrees well with experiment. The aggregation behavior of these novel particles can therefore, be described by a relatively simple model.

Methodology for sensitivity analysis, approximate analysis, and design optimization in CFD for multidisciplinary applications

NASA Technical Reports Server (NTRS)

Taylor, Arthur C., III; Hou, Gene W.

1993-01-01

In this study involving advanced fluid flow codes, an incremental iterative formulation (also known as the delta or correction form) together with the well-known spatially-split approximate factorization algorithm, is presented for solving the very large sparse systems of linear equations which are associated with aerodynamic sensitivity analysis. For smaller 2D problems, a direct method can be applied to solve these linear equations in either the standard or the incremental form, in which case the two are equivalent. Iterative methods are needed for larger 2D and future 3D applications, however, because direct methods require much more computer memory than is currently available. Iterative methods for solving these equations in the standard form are generally unsatisfactory due to an ill-conditioning of the coefficient matrix; this problem can be overcome when these equations are cast in the incremental form. These and other benefits are discussed. The methodology is successfully implemented and tested in 2D using an upwind, cell-centered, finite volume formulation applied to the thin-layer Navier-Stokes equations. Results are presented for two sample airfoil problems: (1) subsonic low Reynolds number laminar flow; and (2) transonic high Reynolds number turbulent flow.

49 CFR 563.8 - Data format.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the first acceleration data point; (3) The number of the last point (NLP), which is an integer that...; and (4) NLP—NFP + 1 acceleration values sequentially beginning with the acceleration at time NFP * TS and continue sampling the acceleration at TS increments in time until the time NLP * TS is reached...

49 CFR 563.8 - Data format

Code of Federal Regulations, 2010 CFR

2010-10-01

... number of the last point (NLP), which is an integer that when multiplied by the TS equals the time relative to time zero of the last acceleration data point; and (4) NLP—NFP + 1 acceleration values... increments in time until the time NLP * TS is reached. [73 FR 2183, Jan. 14, 2008] ...

A triangular thin shell finite element: Nonlinear analysis. [structural analysis

NASA Technical Reports Server (NTRS)

Thomas, G. R.; Gallagher, R. H.

1975-01-01

Aspects of the formulation of a triangular thin shell finite element which pertain to geometrically nonlinear (small strain, finite displacement) behavior are described. The procedure for solution of the resulting nonlinear algebraic equations combines a one-step incremental (tangent stiffness) approach with one iteration in the Newton-Raphson mode. A method is presented which permits a rational estimation of step size in this procedure. Limit points are calculated by means of a superposition scheme coupled to the incremental side of the solution procedure while bifurcation points are calculated through a process of interpolation of the determinants of the tangent-stiffness matrix. Numerical results are obtained for a flat plate and two curved shell problems and are compared with alternative solutions.

Detecting Statistically Significant Communities of Triangle Motifs in Undirected Networks

DTIC Science & Technology

2015-03-16

moderately-sized networks. As a consequence, throughout this effort, a simulated annealing (SA) algorithm will be employed to effectively search the...then increment k by 1 and repeat the search to find z∗3. Once can continue to increment k until W < zδ, at which point the algorithm will stop and...collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources

Rational design to improve thermostability and specific activity of the truncated Fibrobacter succinogenes 1,3-1,4-β-D-glucanase.

PubMed

Huang, Jian-Wen; Cheng, Ya-Shan; Ko, Tzu-Ping; Lin, Cheng-Yen; Lai, Hui-Lin; Chen, Chun-Chi; Ma, Yanhe; Zheng, Yingying; Huang, Chun-Hsiang; Zou, Peijian; Liu, Je-Ruei; Guo, Rey-Ting

2012-04-01

1,3-1,4-β-D-Glucanase has been widely used as a feed additive to help non-ruminant animals digest plant fibers, with potential in increasing nutrition turnover rate and reducing sanitary problems. Engineering of enzymes for better thermostability is of great importance because it not only can broaden their industrial applications, but also facilitate exploring the mechanism of enzyme stability from structural point of view. To obtain enzyme with higher thermostability and specific activity, structure-based rational design was carried out in this study. Eleven mutants of Fibrobacter succinogenes 1,3-1,4-β-D-glucanase were constructed in attempt to improve the enzyme properties. In particular, the crude proteins expressed in Pichia pastoris were examined firstly to ensure that the protein productions meet the need for industrial fermentation. The crude protein of V18Y mutant showed a 2 °C increment of Tm and W203Y showed ∼30% increment of the specific activity. To further investigate the structure-function relationship, some mutants were expressed and purified from P. pastoris and Escherichia coli. Notably, the specific activity of purified W203Y which was expressed in E. coli was 63% higher than the wild-type protein. The double mutant V18Y/W203Y showed the same increments of Tm and specific activity as the single mutants did. When expressed and purified from E. coli, V18Y/W203Y showed similar pattern of thermostability increment and 75% higher specific activity. Furthermore, the apo-form and substrate complex structures of V18Y/W203Y were solved by X-ray crystallography. Analyzing protein structure of V18Y/W203Y helps elucidate how the mutations could enhance the protein stability and enzyme activity.

Multi-point optimization of recirculation flow type casing treatment in centrifugal compressors

NASA Astrophysics Data System (ADS)

Tun, Min Thaw; Sakaguchi, Daisaku

2016-06-01

High-pressure ratio and wide operating range are highly required for a turbocharger in diesel engines. A recirculation flow type casing treatment is effective for flow range enhancement of centrifugal compressors. Two ring grooves on a suction pipe and a shroud casing wall are connected by means of an annular passage and stable recirculation flow is formed at small flow rates from the downstream groove toward the upstream groove through the annular bypass. The shape of baseline recirculation flow type casing is modified and optimized by using a multi-point optimization code with a metamodel assisted evolutionary algorithm embedding a commercial CFD code CFX from ANSYS. The numerical optimization results give the optimized design of casing with improving adiabatic efficiency in wide operating flow rate range. Sensitivity analysis of design parameters as a function of efficiency has been performed. It is found that the optimized casing design provides optimized recirculation flow rate, in which an increment of entropy rise is minimized at grooves and passages of the rotating impeller.

Multiple-hopping trajectories near a rotating asteroid

NASA Astrophysics Data System (ADS)

Shen, Hong-Xin; Zhang, Tian-Jiao; Li, Zhao; Li, Heng-Nian

2017-03-01

We present a study of the transfer orbits connecting landing points of irregular-shaped asteroids. The landing points do not touch the surface of the asteroids and are chosen several meters above the surface. The ant colony optimization technique is used to calculate the multiple-hopping trajectories near an arbitrary irregular asteroid. This new method has three steps which are as follows: (1) the search of the maximal clique of candidate target landing points; (2) leg optimization connecting all landing point pairs; and (3) the hopping sequence optimization. In particular this method is applied to asteroids 433 Eros and 216 Kleopatra. We impose a critical constraint on the target landing points to allow for extensive exploration of the asteroid: the relative distance between all the arrived target positions should be larger than a minimum allowed value. Ant colony optimization is applied to find the set and sequence of targets, and the differential evolution algorithm is used to solve for the hopping orbits. The minimum-velocity increment tours of hopping trajectories connecting all the landing positions are obtained by ant colony optimization. The results from different size asteroids indicate that the cost of the minimum velocity-increment tour depends on the size of the asteroids.

Warfighter Information Network - Tactical (WIN-T) Increment 2: Second Follow-on Operational Test and Evaluation

DTIC Science & Technology

2015-05-01

HNW line-of-sight network is mounted on a 10-meter telescoping mast located just aft of the TCN’s cab. The flat plate Range Throughput Extension Kit... TAC – Tactical Command Post ATH – At-the-Halt PoP – Point of Presence SNE – Soldier Network Extension NOSC – Network Operations & Security...Survivability/Lethality Analysis Directorate (ARL/SLAD) conducted a Cooperative Vulnerability and Penetration Assessment on WIN-T Increment 2. The Army

A Model Based Approach to Increase the Part Accuracy in Robot Based Incremental Sheet Metal Forming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, Horst; Laurischkat, Roman; Zhu Junhong

One main influence on the dimensional accuracy in robot based incremental sheet metal forming results from the compliance of the involved robot structures. Compared to conventional machine tools the low stiffness of the robot's kinematic results in a significant deviation of the planned tool path and therefore in a shape of insufficient quality. To predict and compensate these deviations offline, a model based approach, consisting of a finite element approach, to simulate the sheet forming, and a multi body system, modeling the compliant robot structure, has been developed. This paper describes the implementation and experimental verification of the multi bodymore » system model and its included compensation method.« less

Mechanism of gas saturated oil viscosity anomaly near to phase transition point

NASA Astrophysics Data System (ADS)

Suleimanov, Baghir A.; Abbasov, Elkhan M.; Sisenbayeva, Marziya R.

2017-01-01

The article presents experimental studies of the phase behavior by the flash liberation test and of the viscosity of the live oil at different pressures. Unlike the typical studies at the pressure near the saturation pressure, the measurements were conducted at a relatively small pressure increment of 0.08-0.25 MPa. The viscosity anomaly was discovered experimentally near to the phase transition point in the range of the pressure levels P/Pb = 1-1.14 (Pb—bubble point pressure) and shows that it decreases about 70 times in comparison to the viscosity at the reservoir pressure. It was found that the bubble point pressure decreases significantly (up to 36%) with surfactant addition. Furthermore, the viscosity of the live oil at the surfactant concentration of 5 wt. % decreases almost 37 times in comparison to the viscosity at the reservoir pressure. The mechanism of observed effects was suggested based on the formation of the stable subcritical gas nuclei and associated slippage effect. The mechanism for the stabilization of the subcritical nuclei by the combined action of the surface and electrical forces, as well as the morphology of the formed nanobubbles, was considered. The model for determining the oil viscosity taking into account the slippage effect was suggested.

Effect of ultrasonic cavitation on the diffusivity of a point defect in the passive film on formed Nb in 0.5 M HCl solution.

PubMed

Li, D G

2015-11-01

This work primarily focused on the influence of ultrasonic cavitation on the transport property of the point defect in the passive film on formed Nb in 0.5M HCl solution via electrochemical techniques based on the point defect model (PDM). The influence of ultrasonic cavitation on the composition and structure of the passive film was detected by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). The transport property of a point defect in the passive film was characterized by the diffusivity of the point defect (D0). The influences of the ultrasonic cavitation power, passivated time and the distance between horn bottom and sample surface on D0 were analyzed. The results demonstrated that the passive film formed on Nb was an n-type semiconductor with a donor density (ND) ranging from 10(19) cm(-3) to 10(20) cm(-3) in the case of static state, while the order of ND increased one to two times by applying ultrasonic cavitation during film formation. The diffusivity of the point defect (D0) in the passive film formed on Nb at 0.5 V for 1 h in a 0.5 M HCl solution in the static state was calculated to be 9.704×10(-18) cm(2) s(-1), and it increased to 1.255×10(-16) cm(2) s(-1), 7.259×10(-16) cm(2) s(-1) and 7.296×10(-15) cm(2) s(-1) when applying the 180 W, 270 W and 450 W ultrasonic cavitation powers during film formation. D0 increased with the increment of the ultrasonic cavitation power, and decreased with the increased in formation time and distance between the horn bottom and sample surface. AES results showed the film structure and composition were changed by applying the ultrasonic cavitation. XPS results revealed that the passive film was mainly composed of Nb2O5 in the static state, and the low valence Nb-oxide (NbO) appeared in the passive film except Nb2O5 in the case of applying a 270 W ultrasonic cavitation power. Copyright © 2015 Elsevier B.V. All rights reserved.

Motivation and performance in physical education: an experimental test.

PubMed

Moreno, Juan A; González-Cutre, David; Martín-Albo, José; Cervelló, Eduardo

2010-01-01

The purpose of this study was to analyse, experimentally, the relationships between motivation and performance in a lateral movement test in physical education. The study group consisted of 363 students (227 boys and 136 girls), aged between 12 and 16, who were randomly divided into three groups: an experimental group in which an incremental ability belief was induced, another experimental group in which an entity ability belief was induced, and a control group where there was no intervention. Measurements were made of situational intrinsic motivation, perceived competence in executing the task and performance. The results revealed that the incremental group reported higher scores on the situational intrinsic motivation scale. The entity group demonstrated better performance in the first test attempt than the incremental group but, in the second attempt, the performance was similar in the different groups. Perhaps the initial differences in performance disappeared because the incremental group counted on improving in the second attempt. These results are discussed in relation to the intensity with which the teacher conveys information relating to incremental ability belief of the pupil to increase intrinsic motivation and performance. Key pointsThe incremental group showed more situational intrinsic motivation.The entity group showed higher performance in the first test attempt, but significant differences disappeared in the second attempt.It seems that this incremental belief and greater intrinsic motivation made the students trust they would improve their performance in the second attempt at the lateral movement test.

Sample size calculation in economic evaluations.

PubMed

Al, M J; van Hout, B A; Michel, B C; Rutten, F F

1998-06-01

A simulation method is presented for sample size calculation in economic evaluations. As input the method requires: the expected difference and variance of costs and effects, their correlation, the significance level (alpha) and the power of the testing method and the maximum acceptable ratio of incremental effectiveness to incremental costs. The method is illustrated with data from two trials. The first compares primary coronary angioplasty with streptokinase in the treatment of acute myocardial infarction, in the second trial, lansoprazole is compared with omeprazole in the treatment of reflux oesophagitis. These case studies show how the various parameters influence the sample size. Given the large number of parameters that have to be specified in advance, the lack of knowledge about costs and their standard deviation, and the difficulty of specifying the maximum acceptable ratio of incremental effectiveness to incremental costs, the conclusion of the study is that from a technical point of view it is possible to perform a sample size calculation for an economic evaluation, but one should wonder how useful it is.

Linear-scaling generation of potential energy surfaces using a double incremental expansion

DOE Office of Scientific and Technical Information (OSTI.GOV)

König, Carolin, E-mail: carolink@kth.se; Christiansen, Ove, E-mail: ove@chem.au.dk

We present a combination of the incremental expansion of potential energy surfaces (PESs), known as n-mode expansion, with the incremental evaluation of the electronic energy in a many-body approach. The application of semi-local coordinates in this context allows the generation of PESs in a very cost-efficient way. For this, we employ the recently introduced flexible adaptation of local coordinates of nuclei (FALCON) coordinates. By introducing an additional transformation step, concerning only a fraction of the vibrational degrees of freedom, we can achieve linear scaling of the accumulated cost of the single point calculations required in the PES generation. Numerical examplesmore » of these double incremental approaches for oligo-phenyl examples show fast convergence with respect to the maximum number of simultaneously treated fragments and only a modest error introduced by the additional transformation step. The approach, presented here, represents a major step towards the applicability of vibrational wave function methods to sizable, covalently bound systems.« less

49 CFR 563.8 - Data format.

Code of Federal Regulations, 2013 CFR

2013-10-01

... number of the last point (NLP), which is an integer that when multiplied by the TS equals the time relative to time zero of the last acceleration data point; and (4) NLP—NFP + 1 acceleration values... increments in time until the time NLP * TS is reached. [73 FR 2183, Jan. 14, 2008, as amended at 76 FR 47488...

49 CFR 563.8 - Data format.

Code of Federal Regulations, 2014 CFR

2014-10-01

... number of the last point (NLP), which is an integer that when multiplied by the TS equals the time relative to time zero of the last acceleration data point; and (4) NLP—NFP + 1 acceleration values... increments in time until the time NLP * TS is reached. [73 FR 2183, Jan. 14, 2008, as amended at 76 FR 47488...

Interactive matching of ultrasound and MRI for visualization during resection of myomata

NASA Astrophysics Data System (ADS)

de Bruin, Paul W.; Vos, Frans M.; Post, Frits H.; Vossepoel, Albert M.; de Blok, Sjoerd

2002-05-01

Piecewise removal of myomata (fibroids, benign tumors) from the uterine wall is performed using a hysteroresectoscope inserted through the vagina. Only radical removal of the myoma prevents regrowth, whereas penetration of the uterine wall should be avoided. Preoperative MR (Magnetic Resonance) images show the full outline and the location of the myoma in the uterine wall. Preoperative 3D US (ultrasound) reveals the part of the myoma that protrudes into the uterine cavity, but the part located in the uterine wall is almost invisible. The images and extracted preoperative information must be registered to the preoperative situation. A pragmatic solution in the form of three point incremental matching is applied. Three patients were scanned and the matching was performed on the data. The procedure provided a good match on two patients.

Seasonal variations in body composition, maximal oxygen uptake, and gas exchange threshold in cross-country skiers.

PubMed

Polat, Metin; Korkmaz Eryılmaz, Selcen; Aydoğan, Sami

2018-01-01

In order to ensure that athletes achieve their highest performance levels during competitive seasons, monitoring their long-term performance data is crucial for understanding the impact of ongoing training programs and evaluating training strategies. The present study was thus designed to investigate the variations in body composition, maximal oxygen uptake (VO 2max ), and gas exchange threshold values of cross-country skiers across training phases throughout a season. In total, 15 athletes who participate in international cross-country ski competitions voluntarily took part in this study. The athletes underwent incremental treadmill running tests at 3 different time points over a period of 1 year. The first measurements were obtained in July, during the first preparation period; the second measurements were obtained in October, during the second preparation period; and the third measurements were obtained in February, during the competition period. Body weight, body mass index (BMI), body fat (%), as well as VO 2max values and gas exchange threshold, measured using V-slope method during the incremental running tests, were assessed at all 3 time points. The collected data were analyzed using SPSS 20 package software. Significant differences between the measurements were assessed using Friedman's twoway variance analysis with a post hoc option. The athletes' body weights and BMI measurements at the third point were significantly lower compared with the results of the second measurement ( p <0.001). Moreover, the incremental running test time was significantly higher at the third measurement, compared with both the first ( p <0.05) and the second ( p <0.01) measurements. Similarly, the running speed during the test was significantly higher at the third measurement time point compared with the first measurement time point ( p <0.05). Body fat (%), time to reach the gas exchange threshold, running speed at the gas exchange threshold, VO 2max , amount of oxygen consumed at gas exchange threshold level (VO 2GET ), maximal heart rate (HR max ), and heart rate at gas exchange threshold level (HR GET ) values did not significantly differ between the measurement time points ( p >0.05). VO 2max and gas exchange threshold values recorded during the third measurements, the timing of which coincided with the competitive season of the cross-country skiers, did not significantly change, but their incremental running test time and running speed significantly increased while their body weight and BMI significantly decreased. These results indicate that the cross-country skiers developed a tolerance for high-intensity exercise and reached their highest level of athletic performance during the competitive season.

Robot-based additive manufacturing for flexible die-modelling in incremental sheet forming

NASA Astrophysics Data System (ADS)

Rieger, Michael; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2017-10-01

The paper describes the application concept of additive manufactured dies to support the robot-based incremental sheet metal forming process (`Roboforming') for the production of sheet metal components in small batch sizes. Compared to the dieless kinematic-based generation of a shape by means of two cooperating industrial robots, the supporting robot models a die on the back of the metal sheet by using the robot-based fused layer manufacturing process (FLM). This tool chain is software-defined and preserves the high geometrical form flexibility of Roboforming while flexibly generating support structures adapted to the final part's geometry. Test series serve to confirm the feasibility of the concept by investigating the process challenges of the adhesion to the sheet surface and the general stability as well as the influence on the geometric accuracy compared to the well-known forming strategies.

Using temporal orientation, category fluency, and word recall for detecting cognitive impairment: the 10-point cognitive screener (10-CS).

PubMed

Apolinario, Daniel; Lichtenthaler, Daniel Gomes; Magaldi, Regina Miksian; Soares, Aline Thomaz; Busse, Alexandre Leopold; Amaral, Jose Renato das Gracas; Jacob-Filho, Wilson; Brucki, Sonia Maria Dozzi

2016-01-01

A screening strategy composed of three-item temporal orientation and three-word recall has been increasingly used for detecting cognitive impairment. However, the intervening task administered between presentation and recall has varied. We evaluated six brief tasks that could be useful as intervening distractors and possibly provide incremental accuracy: serial subtraction, clock drawing, category fluency, letter fluency, timed visual detection, and digits backwards. Older adults (n = 230) consecutively referred for suspected cognitive impairment underwent a comprehensive assessment for gold-standard diagnosis, of whom 56 (24%) presented cognitive impairment not dementia and 68 (30%) presented dementia. Among those with dementia, 87% presented very mild or mild stages (Clinical Dementia Rating 0.5 or 1). The incremental value of each candidate intervening task in a model already containing orientation and word recall was assessed. Category fluency (animal naming) presented the highest incremental value among the six candidate intervening tasks. Reclassification analyses revealed a net gain of 12% among cognitively impaired and 17% among normal participants. A four-point scaled score of the animal naming task was added to three-item temporal orientation and three-word recall to compose the 10-point Cognitive Screener. The education-adjusted 10-point Cognitive Screener outperformed the longer Mini-Mental State Examination for detecting both cognitive impairment (area under the curve 0.85 vs 0.77; p = 0.027) and dementia (area under the curve 0.90 vs 0.83; p = 0.015). Based on empirical data, we have developed a brief and easy-to-use screening strategy with higher accuracy and some practical advantages compared with commonly used tools. Copyright © 2015 John Wiley & Sons, Ltd.

Experimental studies of glued Aluminum-glass joints

NASA Astrophysics Data System (ADS)

Ligaj, B.; Wirwicki, M.; Karolewska, K.; Jasińska, A.

2018-04-01

Glued steel-glass or aluminum-glass joints are to be found, among other things, in vehicles (cars, buses, trains, trams) as windscreen assembly pieces for the supporting structure. For the purposes of the experiments, samples were made in which the top beam was made of the AW-2017A aluminum alloy and the bottom beam was made of thermally reinforced soda-lime glass whereas the glued joints were made of one-component polyurethane glue Körapur 175. The tests were performed under four-point bending conditions at monotonic incremental bending moment values on the Instron 5965 durability machine. The experimental study of the durability of glued joints under four-point bending conditions with the monotonic incremental bending moment allows to determine the values of stresses, whose value is related to initiation of damage of the tested joint.

Dynamics of incremental motion devices associated with planetary exploration spacecraft. [Mariner Jupiter Saturn 1977

NASA Technical Reports Server (NTRS)

Hughes, R. O.

1975-01-01

Incremental motion devices provide accurate and rapid movement of spacecraft science platforms, antennas and related mechanisms. The paper considers the computerized simulation of a stepper motor/gear train/ science platform system that will be launched on the Mariner Jupiter Saturn 1977. It was determined that a smaller stepper motor could be used as the prime mover for the science platform, and it was concluded that the existing digital controller was unable to achieve the required pointing accuracy, and a new controller design was necessary.

Stable Isotope Analysis of Extant Lamnoid Shark Centra: A New Tool in Age Determination?

NASA Astrophysics Data System (ADS)

Labs, J.

2003-12-01

The oxygen isotopes of fourteen vertebral centra from ten extant lamnoid sharks (including Carcharodon carcharias [great white], Isurus paucus [longfin mako], and Isurus oxyrinchus [shortfin mako]) were sampled and measured along the growth axis to determine the periodicity of incremental growth represented in the centra. As part of the internal (endochondral) skeleton, shark centra are composed initially of hyaline cartilage, which then secondarily ossifies during ontogeny forming calcified hydroxyapatite bone. The incremental growth of shark centra forms definite growth rings, with darker denser portions being deposited during slower growth times (i.e., winter) and lighter portions being deposited during more rapid growth (i.e., summer). Thus, shark centra, whether they are extant or extinct, are characterized by clearly delineated incremental growth couplets. The problem with this general rule is that there are several factors in which the growth of these couplets can vary depending upon physical environment (including temperature and water depth), food availability, and stress. The challenge for paleobiological interpretations is how to interpret the periodicity of this growth. It can generally be assumed that these bands are annual, but it is uncertain the extent to which exceptions to the rule occur. Stable isotopic analysis provides the potential to independently determine the periodicity of the growth increments and ultimately the ontogenetic age of an individual.

Nonlinear mesomechanics of composites with periodic microstructure

NASA Technical Reports Server (NTRS)

Walker, Kevin P.; Jordan, Eric H.; Freed, Alan D.

1989-01-01

This work is concerned with modeling the mechanical deformation or constitutive behavior of composites comprised of a periodic microstructure under small displacement conditions at elevated temperature. A mesomechanics approach is adopted which relates the microimechanical behavior of the heterogeneous composite with its in-service macroscopic behavior. Two different methods, one based on a Fourier series approach and the other on a Green's function approach, are used in modeling the micromechanical behavior of the composite material. Although the constitutive formulations are based on a micromechanical approach, it should be stressed that the resulting equations are volume averaged to produce overall effective constitutive relations which relate the bulk, volume averaged, stress increment to the bulk, volume averaged, strain increment. As such, they are macromodels which can be used directly in nonlinear finite element programs such as MARC, ANSYS and ABAQUS or in boundary element programs such as BEST3D. In developing the volume averaged or efective macromodels from the micromechanical models, both approaches will require the evaluation of volume integrals containing the spatially varying strain distributions throughout the composite material. By assuming that the strain distributions are spatially constant within each constituent phase-or within a given subvolume within each constituent phase-of the composite material, the volume integrals can be obtained in closed form. This simplified micromodel can then be volume averaged to obtain an effective macromodel suitable for use in the MARC, ANSYS and ABAQUS nonlinear finite element programs via user constitutive subroutines such as HYPELA and CMUSER. This effective macromodel can be used in a nonlinear finite element structural analysis to obtain the strain-temperature history at those points in the structure where thermomechanical cracking and damage are expected to occur, the so called damage critical points of the structure.

Objectivity and validity of EMG method in estimating anaerobic threshold.

PubMed

Kang, S-K; Kim, J; Kwon, M; Eom, H

2014-08-01

The purposes of this study were to verify and compare the performances of anaerobic threshold (AT) point estimates among different filtering intervals (9, 15, 20, 25, 30 s) and to investigate the interrelationships of AT point estimates obtained by ventilatory threshold (VT) and muscle fatigue thresholds using electromyographic (EMG) activity during incremental exercise on a cycle ergometer. 69 untrained male university students, yet pursuing regular exercise voluntarily participated in this study. The incremental exercise protocol was applied with a consistent stepwise increase in power output of 20 watts per minute until exhaustion. AT point was also estimated in the same manner using V-slope program with gas exchange parameters. In general, the estimated values of AT point-time computed by EMG method were more consistent across 5 filtering intervals and demonstrated higher correlations among themselves when compared with those values obtained by VT method. The results found in the present study suggest that the EMG signals could be used as an alternative or a new option in estimating AT point. Also the proposed computing procedure implemented in Matlab for the analysis of EMG signals appeared to be valid and reliable as it produced nearly identical values and high correlations with VT estimates. © Georg Thieme Verlag KG Stuttgart · New York.

40 CFR 89.422 - Dilute sampling procedures-CVS calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Pressure depression at CVS pump inlet PPI kPa ±.055 kPa Pressure head at CVS pump outlet PPO kPa ±.055 kPa... restricted condition in an increment of pump inlet depression that will yield a minimum of six data points... depression, (kPa). (iii) The correlation function at each test point is then calculated from the calibration...

40 CFR 89.422 - Dilute sampling procedures-CVS calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Pressure depression at CVS pump inlet PPI kPa ±.055 kPa Pressure head at CVS pump outlet PPO kPa ±.055 kPa... restricted condition in an increment of pump inlet depression that will yield a minimum of six data points... depression, (kPa). (iii) The correlation function at each test point is then calculated from the calibration...

40 CFR 89.422 - Dilute sampling procedures-CVS calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Pressure depression at CVS pump inlet PPI kPa ±.055 kPa Pressure head at CVS pump outlet PPO kPa ±.055 kPa... restricted condition in an increment of pump inlet depression that will yield a minimum of six data points... depression, (kPa). (iii) The correlation function at each test point is then calculated from the calibration...

40 CFR 89.422 - Dilute sampling procedures-CVS calibration.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pressure depression at CVS pump inlet PPI kPa ±.055 kPa Pressure head at CVS pump outlet PPO kPa ±.055 kPa... restricted condition in an increment of pump inlet depression that will yield a minimum of six data points... depression, (kPa). (iii) The correlation function at each test point is then calculated from the calibration...

40 CFR 89.422 - Dilute sampling procedures-CVS calibration.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Pressure depression at CVS pump inlet PPI kPa ±.055 kPa Pressure head at CVS pump outlet PPO kPa ±.055 kPa... restricted condition in an increment of pump inlet depression that will yield a minimum of six data points... depression, (kPa). (iii) The correlation function at each test point is then calculated from the calibration...

THE NEW ENLISTED EVALUATION SYSTEM: DID THE AIR FORCE GET IT CORRECT THIS TIME

DTIC Science & Technology

2015-10-01

faced a two-fold problem - excessive manning promoted through the war along with an increased use of contractors for maintenance and support. This...concept to standardize board promotion methods .38 A three-judge panel scored each package using a 10-point scale on ½-point increments. If the three...rounding methods were changed to remove inequities. The original methods rounded up or down to the nearest whole percentage point, but this change

A simple method for quantitating the propensity for calcium oxalate crystallization in urine

NASA Technical Reports Server (NTRS)

Wabner, C. L.; Pak, C. Y.

1991-01-01

To assess the propensity for spontaneous crystallization of calcium oxalate in urine, the permissible increment in oxalate is calculated. The previous method required visual observation of crystallization with the addition of oxalate, this warranted the need for a large volume of urine and a sacrifice in accuracy in defining differences between small incremental changes of added oxalate. Therefore, this method has been miniaturized and spontaneous crystallization is detected from the depletion of radioactive oxalate. The new "micro" method demonstrated a marked decrease (p < 0.001) in the permissible increment in oxalate in urine of stone formers versus normal subjects. Moreover, crystallization inhibitors added to urine, in vitro (heparin or diphosphonate) or in vivo (potassium citrate administration), substantially increased the permissible increment in oxalate. Thus, the "micro" method has proven reliable and accurate in discriminating stone forming from control urine and in distinguishing changes of inhibitory activity.

Estimation of incremental reactivities for multiple day scenarios: an application to ethane and dimethyoxymethane

NASA Astrophysics Data System (ADS)

Stockwell, William R.; Geiger, Harald; Becker, Karl H.

Single-day scenarios are used to calculate incremental reactivities by definition (Carter, J. Air Waste Management Assoc. 44 (1994) 881-899.) but even unreactive organic compounds may have a non-negligible effect on ozone concentrations if multiple-day scenarios are considered. The concentration of unreactive compounds and their products may build up over a multiple-day period and the oxidation products may be highly reactive or highly unreactive affecting the overall incremental reactivity of the organic compound. We have developed a method for calculating incremental reactivities for multiple days based on a standard scenario for polluted European conditions. This method was used to estimate maximum incremental reactivities (MIR) and maximum ozone incremental reactivities (MOIR) for ethane and dimethyoxymethane for scenarios ranging from 1 to 6 days. It was found that the incremental reactivities increased as the length of the simulation period increased. The MIR of ethane increased faster than the value for dimethyoxymethane as the scenarios became longer. The MOIRs of ethane and dimethyoxymethane increased but the change was more modest for scenarios longer than 3 days. MOIRs of both volatile organic compounds were equal within the uncertainties of their chemical mechanisms by the 5 day scenario. These results show that dimethyoxymethane has an ozone forming potential on a per mass basis that is only somewhat greater than ethane if multiple-day scenarios are considered.

Evaluation of cost-effectiveness from the funding body's point of view of ultrasound-guided central venous catheter insertion compared with the conventional technique.

PubMed

Noritomi, Danilo Teixeira; Zigaib, Rogério; Ranzani, Otavio T; Teich, Vanessa

2016-01-01

To evaluate the cost-effectiveness, from the funding body's point of view, of real-time ultrasound-guided central venous catheter insertion compared to the traditional method, which is based on the external anatomical landmark technique. A theoretical simulation based on international literature data was applied to the Brazilian context, i.e., the Unified Health System (Sistema Único de Saúde - SUS). A decision tree was constructed that showed the two central venous catheter insertion techniques: real-time ultrasonography versus external anatomical landmarks. The probabilities of failure and complications were extracted from a search on the PubMed and Embase databases, and values associated with the procedure and with complications were taken from market research and the Department of Information Technology of the Unified Health System (DATASUS). Each central venous catheter insertion alternative had a cost that could be calculated by following each of the possible paths on the decision tree. The incremental cost-effectiveness ratio was calculated by dividing the mean incremental cost of real-time ultrasound compared to the external anatomical landmark technique by the mean incremental benefit, in terms of avoided complications. When considering the incorporation of real-time ultrasound and the concomitant lower cost due to the reduced number of complications, the decision tree revealed a final mean cost for the external anatomical landmark technique of 262.27 Brazilian reals (R$) and for real-time ultrasound of R$187.94. The final incremental cost of the real-time ultrasound-guided technique was -R$74.33 per central venous catheter. The incremental cost-effectiveness ratio was -R$2,494.34 due to the pneumothorax avoided. Real-time ultrasound-guided central venous catheter insertion was associated with decreased failure and complication rates and hypothetically reduced costs from the view of the funding body, which in this case was the SUS.

[Indoor simulation on dew formation on plant leaves].

PubMed

Gao, Zhi-Yong; Wang, You-Ke; Wei, Xin-Guang; Liu, Shou-Yang; He, Zi-Li; Zhou, Yu-Hong

2014-03-01

Dew forming on plant leaves through water condensation plays a significant ecological role in arid and semi-arid areas as an ignorable fraction of water resources. In this study, an artificial intelligent climate chamber and an automatic temperature-control system for leaves were implemented to regulate the ambient temperature, the leaf surface temperature and the leaf inclination for dew formation. The impact of leaf inclination, ambient temperature and dew point-leaf temperature depression on the rate and quantity of dew accumulation on leaf surface were analyzed. The results indicated that the accumulation rate and the maximum volume of dew on leaves decreased with increasing the leaf inclination while increased with the increment of dew point-leaf temperature depression, ambient temperature and relative humidity. Under the horizontal configuration, dew accumulated linearly on leaf surface over time until the maximum volume (0.80 mm) was reached. However, dew would fall down after reaching the maximum volume when the leaf inclination existed (45 degrees or 90 degrees), significantly slowing down the accumulative rate, and the zigzag pattern for the dynamic of dew accumulation appeared.

Comparison of P&O and INC Methods in Maximum Power Point Tracker for PV Systems

NASA Astrophysics Data System (ADS)

Chen, Hesheng; Cui, Yuanhui; Zhao, Yue; Wang, Zhisen

2018-03-01

In the context of renewable energy, the maximum power point tracker (MPPT) is often used to increase the solar power efficiency, taking into account the randomness and volatility of solar energy due to changes in temperature and photovoltaic. In all MPPT techniques, perturb & observe and incremental conductance are widely used in MPPT controllers, because of their simplicity and ease of operation. According to the internal structure of the photovoltaic cell and the output volt-ampere characteristic, this paper established the circuit model and establishes the dynamic simulation model in Matlab/Simulink with the preparation of the s function. The perturb & observe MPPT method and the incremental conductance MPPT method were analyzed and compared by the theoretical analysis and digital simulation. The simulation results have shown that the system with INC MPPT method has better dynamic performance and improves the output power of photovoltaic power generation.

Tolerance of image enhancement brightness and contrast in lateral cephalometric digital radiography for Steiner analysis

NASA Astrophysics Data System (ADS)

Rianti, R. A.; Priaminiarti, M.; Syahraini, S. I.

2017-08-01

Image enhancement brightness and contrast can be adjusted on lateral cephalometric digital radiographs to improve image quality and anatomic landmarks for measurement by Steiner analysis. To determine the limit value for adjustments of image enhancement brightness and contrast in lateral cephalometric digital radiography for Steiner analysis. Image enhancement brightness and contrast were adjusted on 100 lateral cephalometric radiography in 10-point increments (-30, -20, -10, 0, +10, +20, +30). Steiner analysis measurements were then performed by two observers. Reliabilities were tested by the Interclass Correlation Coefficient (ICC) and significance tested by ANOVA or the Kruskal Wallis test. No significant differences were detected in lateral cephalometric analysis measurements following adjustment of the image enhancement brightness and contrast. The limit value of adjustments of the image enhancement brightness and contrast associated with incremental 10-point changes (-30, -20, -10, 0, +10, +20, +30) does not affect the results of Steiner analysis.

Precision Linear Actuator for Space Interferometry Mission (SIM) Siderostat Pointing

NASA Technical Reports Server (NTRS)

Cook, Brant; Braun, David; Hankins, Steve; Koenig, John; Moore, Don

2008-01-01

'SIM PlanetQuest will exploit the classical measuring tool of astrometry (interferometry) with unprecedented precision to make dramatic advances in many areas of astronomy and astrophysics'(1). In order to obtain interferometric data two large steerable mirrors, or Siderostats, are used to direct starlight into the interferometer. A gimbaled mechanism actuated by linear actuators is chosen to meet the unprecedented pointing and angle tracking requirements of SIM. A group of JPL engineers designed, built, and tested a linear ballscrew actuator capable of performing submicron incremental steps for 10 years of continuous operation. Precise, zero backlash, closed loop pointing control requirements, lead the team to implement a ballscrew actuator with a direct drive DC motor and a precision piezo brake. Motor control commutation using feedback from a precision linear encoder on the ballscrew output produced an unexpected incremental step size of 20 nm over a range of 120 mm, yielding a dynamic range of 6,000,000:1. The results prove linear nanometer positioning requires no gears, levers, or hydraulic converters. Along the way many lessons have been learned and will subsequently be shared.

Do two and three year old children use an incremental first-NP-as-agent bias to process active transitive and passive sentences?: A permutation analysis

PubMed Central

Chang, Franklin; Rowland, Caroline; Ferguson, Heather; Pine, Julian

2017-01-01

We used eye-tracking to investigate if and when children show an incremental bias to assume that the first noun phrase in a sentence is the agent (first-NP-as-agent bias) while processing the meaning of English active and passive transitive sentences. We also investigated whether children can override this bias to successfully distinguish active from passive sentences, after processing the remainder of the sentence frame. For this second question we used eye-tracking (Study 1) and forced-choice pointing (Study 2). For both studies, we used a paradigm in which participants simultaneously saw two novel actions with reversed agent-patient relations while listening to active and passive sentences. We compared English-speaking 25-month-olds and 41-month-olds in between-subjects sentence structure conditions (Active Transitive Condition vs. Passive Condition). A permutation analysis found that both age groups showed a bias to incrementally map the first noun in a sentence onto an agent role. Regarding the second question, 25-month-olds showed some evidence of distinguishing the two structures in the eye-tracking study. However, the 25-month-olds did not distinguish active from passive sentences in the forced choice pointing task. In contrast, the 41-month-old children did reanalyse their initial first-NP-as-agent bias to the extent that they clearly distinguished between active and passive sentences both in the eye-tracking data and in the pointing task. The results are discussed in relation to the development of syntactic (re)parsing. PMID:29049390

An Inquiry into the Cost of Post Deployment Software Support (PDSS)

DTIC Science & Technology

1989-09-01

Equations .......... ii vi AFIT/GLM/LSY/835- I0 The increasing cost of software maintenance is taking a larger share of the military bidget each year... increments as needed (3:59). The second page of tne Form 75 starts with a section stating how the hours, and consequently the funds, will be allocated to...length of time required, the timeline can be in hourly, weekly, mnunthly, or quarterly increments . Some milestones included are formal approval, test

Determination of Anaerobic Threshold by Monitoring the O2 Pulse Changes in Endurance Cyclists.

PubMed

Nikooie, Rohollah

2016-06-01

The purpose of this study was to determine the validity of anaerobic threshold (AnT)-equivalent to the second turn point for lactate (LTP2)-estimation using the O2 pulse changes in highly trained endurance cyclists who do not show heart rate deflection point (HRDP) during incremental testing. Sixteen endurance cyclists (age, 24.8 ± 4.7 years) and fifteen active men (age, 24.8 ± 3.7 years) performed an incremental cycling test to exhaustion. Pulmonary oxygen uptake (V[Combining Dot Above]O2) and other hemodynamic variables, heart rate, and blood lactate concentration were measured continuously throughout the test. O2 pulse anaerobic threshold (O2 pulse-AnT) was defined as the second turn point in O2 pulse-workload curve. LTP2 was considered as gold standard assessment of AnT and was applied to confirm the validity of O2 pulse-AnT. Intraclass correlation coefficients and the Bland-Altman method were used to determine the relationship and agreement between the O2 corresponding to LTP2 and O2 pulse-AnT, respectively. The active men and 68.7% of the endurance cyclists showed HRDP, whereas all subjects showed O2 pulse-AnT during incremental testing. In both groups, the values for V[Combining Dot Above]O2 corresponding to LTP2 were not significantly different from the V[Combining Dot Above]O2 at O2 pulse-AnT. The V[Combining Dot Above]O2 at LTP2 and O2 pulse-AnT were highly correlated (endurance cyclists: R = 0.68; standard error of estimate [SEE] = 3.74 ml·kg·min and active men: R = 0.58; SEE = 2.91 ml·kg·min) and Bland-Altman plot revealed the limit of agreement of O2 at LTP2 and O2 pulse-AnT differences between 5.1 and 8.6 ml·kg·min (95% CI). In summary, results of this study showed that the second turn point in the O2 pulse-workload curve occurs around LTP2. Therefore, using O2 pulse-AnT is recommended for the noninvasive determination of AnT in highly trained endurance cyclists who do not show HRDP during incremental exercise.

Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN

NASA Astrophysics Data System (ADS)

Moayedfar, Majid; Hanaei, Hengameh; Majdi Rani, Ahmad; Musa, Mohd Azam Bin; Sadegh Momeni, Mohammad

2018-03-01

The application of incremental sheet forming process as a rapid forming technique is rising in variety of industries such as aerospace, automotive and biomechanical purposes. However, the sheet failure is a big challenge in this process which leads wasting lots of materials. Hence, this study tried to propose a method to predict the early sheet failure in this process using mathematical solution. For the feasibility of the study, design of experiment with the respond surface method is employed to extract a set of experiments data for the simulation. The significant forming parameters were recognized and their integration was used for prediction system. Then, the results were inserted to the artificial neural network as input parameters to predict a vast range of applicable parameters avoiding sheet failure in ISF. The value of accuracy R2 ∼0.93 was obtained and the maximum sheet stretch in the depth of 25mm were recorded. The figures generate from the trend of interaction between effective parameters were provided for future studies.

Enlargement and contracture of C2-ceramide channels.

PubMed

Siskind, Leah J; Davoody, Amirparviz; Lewin, Naomi; Marshall, Stephanie; Colombini, Marco

2003-09-01

Ceramides are known to play a major regulatory role in apoptosis by inducing cytochrome c release from mitochondria. We have previously reported that ceramide, but not dihydroceramide, forms large and stable channels in phospholipid membranes and outer membranes of isolated mitochondria. C(2)-ceramide channel formation is characterized by conductance increments ranging from <1 to >200 nS. These conductance increments often represent the enlargement and contracture of channels rather than the opening and closure of independent channels. Enlargement is supported by the observation that many small conductance increments can lead to a large decrement. Also the initial conductances favor cations, but this selectivity drops dramatically with increasing total conductance. La(+3) causes rapid ceramide channel disassembly in a manner indicative of large conducting structures. These channels have a propensity to contract by a defined size (often multiples of 4 nS) indicating the formation of cylindrical channels with preferred diameters rather than a continuum of sizes. The results are consistent with ceramides forming barrel-stave channels whose size can change by loss or insertion of multiple ceramide columns.

Enlargement and Contracture of C2-Ceramide Channels

PubMed Central

Siskind, Leah J.; Davoody, Amirparviz; Lewin, Naomi; Marshall, Stephanie; Colombini, Marco

2003-01-01

Ceramides are known to play a major regulatory role in apoptosis by inducing cytochrome c release from mitochondria. We have previously reported that ceramide, but not dihydroceramide, forms large and stable channels in phospholipid membranes and outer membranes of isolated mitochondria. C2-ceramide channel formation is characterized by conductance increments ranging from <1 to >200 nS. These conductance increments often represent the enlargement and contracture of channels rather than the opening and closure of independent channels. Enlargement is supported by the observation that many small conductance increments can lead to a large decrement. Also the initial conductances favor cations, but this selectivity drops dramatically with increasing total conductance. La+3 causes rapid ceramide channel disassembly in a manner indicative of large conducting structures. These channels have a propensity to contract by a defined size (often multiples of 4 nS) indicating the formation of cylindrical channels with preferred diameters rather than a continuum of sizes. The results are consistent with ceramides forming barrel-stave channels whose size can change by loss or insertion of multiple ceramide columns. PMID:12944273

On nonstationarity and antipersistency in global temperature series

NASA Astrophysics Data System (ADS)

KäRner, O.

2002-10-01

Statistical analysis is carried out for satellite-based global daily tropospheric and stratospheric temperature anomaly and solar irradiance data sets. Behavior of the series appears to be nonstationary with stationary daily increments. Estimating long-range dependence between the increments reveals a remarkable difference between the two temperature series. Global average tropospheric temperature anomaly behaves similarly to the solar irradiance anomaly. Their daily increments show antipersistency for scales longer than 2 months. The property points at a cumulative negative feedback in the Earth climate system governing the tropospheric variability during the last 22 years. The result emphasizes a dominating role of the solar irradiance variability in variations of the tropospheric temperature and gives no support to the theory of anthropogenic climate change. The global average stratospheric temperature anomaly proceeds like a 1-dim random walk at least up to 11 years, allowing good presentation by means of the autoregressive integrated moving average (ARIMA) models for monthly series.

Fast projection/backprojection and incremental methods applied to synchrotron light tomographic reconstruction.

PubMed

de Lima, Camila; Salomão Helou, Elias

2018-01-01

Iterative methods for tomographic image reconstruction have the computational cost of each iteration dominated by the computation of the (back)projection operator, which take roughly O(N 3 ) floating point operations (flops) for N × N pixels images. Furthermore, classical iterative algorithms may take too many iterations in order to achieve acceptable images, thereby making the use of these techniques unpractical for high-resolution images. Techniques have been developed in the literature in order to reduce the computational cost of the (back)projection operator to O(N 2 logN) flops. Also, incremental algorithms have been devised that reduce by an order of magnitude the number of iterations required to achieve acceptable images. The present paper introduces an incremental algorithm with a cost of O(N 2 logN) flops per iteration and applies it to the reconstruction of very large tomographic images obtained from synchrotron light illuminated data.

The political contradictions of incremental innovation: lessons from pharmaceutical patent examination in Brazil.

PubMed

Shadlen, Kenneth C

2011-01-01

Neodevelopmental patent regimes aim to facilitate local actors’ access to knowledge and also encourage incremental innovations. The case of pharmaceutical patent examination in Brazil illustrates political contradictions between these objectives. Brazil’s patent law includes the Ministry of Health in the examination of pharmaceutical patent applications. Though widely celebrated as a health-oriented policy, the Brazilian experience has become fraught with tensions and subject to decreasing levels of both stability and enforcement. I show how one pillar of the neodevelopmental regime, the array of initiatives to encourage incremental innovations, has fostered the acquisition of innovative capabilities in the Brazilian pharmaceutical sector, and how these new capabilities have altered actors’ policy preferences and thus contributed to the erosion of the coalition in support of the other pillar of the neodevelopmental regime, the health-oriented approach to examining pharmaceutical patents. The analysis of capability-derived preference formation points to an endogenous process of coalitional change.

Broad Learning System: An Effective and Efficient Incremental Learning System Without the Need for Deep Architecture.

PubMed

Chen, C L Philip; Liu, Zhulin

2018-01-01

Broad Learning System (BLS) that aims to offer an alternative way of learning in deep structure is proposed in this paper. Deep structure and learning suffer from a time-consuming training process because of a large number of connecting parameters in filters and layers. Moreover, it encounters a complete retraining process if the structure is not sufficient to model the system. The BLS is established in the form of a flat network, where the original inputs are transferred and placed as "mapped features" in feature nodes and the structure is expanded in wide sense in the "enhancement nodes." The incremental learning algorithms are developed for fast remodeling in broad expansion without a retraining process if the network deems to be expanded. Two incremental learning algorithms are given for both the increment of the feature nodes (or filters in deep structure) and the increment of the enhancement nodes. The designed model and algorithms are very versatile for selecting a model rapidly. In addition, another incremental learning is developed for a system that has been modeled encounters a new incoming input. Specifically, the system can be remodeled in an incremental way without the entire retraining from the beginning. Satisfactory result for model reduction using singular value decomposition is conducted to simplify the final structure. Compared with existing deep neural networks, experimental results on the Modified National Institute of Standards and Technology database and NYU NORB object recognition dataset benchmark data demonstrate the effectiveness of the proposed BLS.

Quasi-brittle damage modeling based on incremental energy relaxation combined with a viscous-type regularization

NASA Astrophysics Data System (ADS)

Langenfeld, K.; Junker, P.; Mosler, J.

2018-05-01

This paper deals with a constitutive model suitable for the analysis of quasi-brittle damage in structures. The model is based on incremental energy relaxation combined with a viscous-type regularization. A similar approach—which also represents the inspiration for the improved model presented in this paper—was recently proposed in Junker et al. (Contin Mech Thermodyn 29(1):291-310, 2017). Within this work, the model introduced in Junker et al. (2017) is critically analyzed first. This analysis leads to an improved model which shows the same features as that in Junker et al. (2017), but which (i) eliminates unnecessary model parameters, (ii) can be better interpreted from a physics point of view, (iii) can capture a fully softened state (zero stresses), and (iv) is characterized by a very simple evolution equation. In contrast to the cited work, this evolution equation is (v) integrated fully implicitly and (vi) the resulting time-discrete evolution equation can be solved analytically providing a numerically efficient closed-form solution. It is shown that the final model is indeed well-posed (i.e., its tangent is positive definite). Explicit conditions guaranteeing this well-posedness are derived. Furthermore, by additively decomposing the stress rate into deformation- and purely time-dependent terms, the functionality of the model is explained. Illustrative numerical examples confirm the theoretical findings.

Addiction, agency, and the politics of self-control: doing harm reduction in a heroin users' group.

PubMed

Gowan, Teresa; Whetstone, Sarah; Andic, Tanja

2012-04-01

Our 2007-2009 ethnography describes and analyses the practice of harm reduction in a heroin users' group in the midwestern United States. While dominant addiction interventions conceptualize the addict as powerless - either through moral or physical weakness - this group contested such "commonsense," treating illicit drug use as one of many ways that modern individuals attempt to "fill the void." Insisting on the destigmatization of addiction and the normalization of illicit drug use, the group helped its members work on incremental steps toward self-management. Although "Connection Points" had very limited resources to improve the lives of its members, our work suggests that the users' group did much to restore self-respect, rational subjectivity, and autonomy to a group historically represented as incapable of reason and self-control. As the users cohered as a community, they developed a critique of the oppressions suffered by "junkies," discussed their rights and entitlements, and even planned the occasional political action. Engaging with literature on the cultural construction of agency and responsibility, we consider, but ultimately complicate, the conceptualization of needle exchange as a "neoliberal" form of population management. Within the context of the United States' War on Drugs, the group's work on destigmatization, health education, and the practice of incremental control showed the potential for reassertions of social citizenship within highly marginal spaces. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Spectrum of Intermediate Syndrome Following Acute Organophosphate Poisoning: A Prospective Cohort Study from Sri Lanka

PubMed Central

Jayawardane, Pradeepa; Dawson, Andrew H; Weerasinghe, Vajira; Karalliedde, Lakshman; Buckley, Nicholas A; Senanayake, Nimal

2008-01-01

Background Intermediate syndrome (IMS) is a major cause of death from respiratory failure following acute organophosphate poisoning. The objective of this study was to determine repetitive nerve stimulation (RNS) predictors of IMS that would assist in patient management and clinical research. Methods and Findings Seventy-eight consenting symptomatic patients with organophosphate poisoning were assessed prospectively with daily physical examination and RNS. RNS was done on the right and left median and ulnar nerves at 1, 3, 10, 15, 20, and 30 Hz. The study was conducted as a prospective observational cohort study in the Central Province, Sri Lanka. IMS was diagnosed in ten out of 78 patients using a priori clinical diagnostic criteria, and five of them developed respiratory failure. All ten patients showed progressive RNS changes correlating with the severity of IMS. A decrement-increment was observed at intermediate and high frequencies preceding the onset of clinical signs of IMS. As the patient developed clinical signs of IMS, decrement-increment was progressively noted at low and intermediate frequencies and a combination of decrement-increment and repetitive fade or severe decrement was noted at high frequencies. Severe decrement preceded respiratory failure in four patients. Thirty patients developed forme fruste IMS with less severe weakness not progressing to respiratory failure whose RNS was characterized by decrement-increment or a combination of decrement-increment and repetitive fade but never severe decrements. Conclusions Characteristic changes in RNS, preceding the development of IMS, help to identify a subgroup of patients at high risk of developing respiratory failure. The forme fruste IMS with the characteristic early changes on RNS indicates that IMS is a spectrum disorder. RNS changes are objective and precede the diagnosis and complications of IMS. Thus they may be useful in clinical management and research. PMID:18630983

Comparison of distortions of complex aluminium sections formed in single-step and incremental roll bending

NASA Astrophysics Data System (ADS)

Farstad, Jan Magnus Granheim; Netland, Øyvind; Welo, Torgeir

2017-10-01

This paper presents the results from a second series of experiments made to study local plastic deformations of a complex, hollow aluminium extrusion formed in roll bending. The first experimental series utilizing a single step roll bending sequence has been presented at the ESAFORM 2016 conference by Farstad et. al. In this recent experimental series, the same aluminium extrusion was formed in incremental steps. The objective was to investigate local distortions of the deformed cross section as a result of different number of steps employed to arrive at the final global shape of the extrusion. Moreover, the results between the two experimental series are compared, focusing on identifying differences in both the desired and the undesired deformations taking place as a result of bending and contact stresses. The profiles formed through multiple passes had less undesirable local distortions of the cross-section than the profiles that were formed in a single pass. However, the springback effect was more pronounced, meaning that the released radii of the profiles were higher.

A comparative study of two prediction models for brain tumor progression

NASA Astrophysics Data System (ADS)

Zhou, Deqi; Tran, Loc; Wang, Jihong; Li, Jiang

2015-03-01

MR diffusion tensor imaging (DTI) technique together with traditional T1 or T2 weighted MRI scans supplies rich information sources for brain cancer diagnoses. These images form large-scale, high-dimensional data sets. Due to the fact that significant correlations exist among these images, we assume low-dimensional geometry data structures (manifolds) are embedded in the high-dimensional space. Those manifolds might be hidden from radiologists because it is challenging for human experts to interpret high-dimensional data. Identification of the manifold is a critical step for successfully analyzing multimodal MR images. We have developed various manifold learning algorithms (Tran et al. 2011; Tran et al. 2013) for medical image analysis. This paper presents a comparative study of an incremental manifold learning scheme (Tran. et al. 2013) versus the deep learning model (Hinton et al. 2006) in the application of brain tumor progression prediction. The incremental manifold learning is a variant of manifold learning algorithm to handle large-scale datasets in which a representative subset of original data is sampled first to construct a manifold skeleton and remaining data points are then inserted into the skeleton by following their local geometry. The incremental manifold learning algorithm aims at mitigating the computational burden associated with traditional manifold learning methods for large-scale datasets. Deep learning is a recently developed multilayer perceptron model that has achieved start-of-the-art performances in many applications. A recent technique named "Dropout" can further boost the deep model by preventing weight coadaptation to avoid over-fitting (Hinton et al. 2012). We applied the two models on multiple MRI scans from four brain tumor patients to predict tumor progression and compared the performances of the two models in terms of average prediction accuracy, sensitivity, specificity and precision. The quantitative performance metrics were calculated as average over the four patients. Experimental results show that both the manifold learning and deep neural network models produced better results compared to using raw data and principle component analysis (PCA), and the deep learning model is a better method than manifold learning on this data set. The averaged sensitivity and specificity by deep learning are comparable with these by the manifold learning approach while its precision is considerably higher. This means that the predicted abnormal points by deep learning are more likely to correspond to the actual progression region.

An Analysis of Time-Related Score Increments and/or Decrements for GRE Repeaters across Ability and Sex Groups.

ERIC Educational Resources Information Center

Rock, Donald; Werts, Charles

The purpose of this study was to obtain information on both the number of individuals who retest and their patterns of score gain (or decrement) by sex and ability. Individuals who retested only once were found to gain about 26-27 points on the Graduate Record Examination (GRE) verbal test and about 23 points on the GRE quantitative test. This…

Effects of acute hypoxia on the determination of anaerobic threshold using the heart rate-work rate relationships during incremental exercise tests.

PubMed

Ozcelik, O; Kelestimur, H

2004-01-01

Anaerobic threshold which describes the onset of systematic increase in blood lactate concentration is a widely used concept in clinical and sports medicine. A deflection point between heart rate-work rate has been introduced to determine the anaerobic threshold non-invasively. However, some researchers have consistently reported a heart rate deflection at higher work rates, while others have not. The present study was designed to investigate whether the heart rate deflection point accurately predicts the anaerobic threshold under the condition of acute hypoxia. Eight untrained males performed two incremental exercise tests using an electromagnetically braked cycle ergometer: one breathing room air and one breathing 12 % O2. The anaerobic threshold was estimated using the V-slope method and determined from the increase in blood lactate and the decrease in standard bicarbonate concentration. This threshold was also estimated by in the heart rate-work rate relationship. Not all subjects exhibited a heart rate deflection. Only two subjects in the control and four subjects in the hypoxia groups showed a heart rate deflection. Additionally, the heart rate deflection point overestimated the anaerobic threshold. In conclusion, the heart rate deflection point was not an accurate predictor of anaerobic threshold and acute hypoxia did not systematically affect the heart rate-work rate relationships.

Ideal tibial intramedullary nail insertion point varies with tibial rotation.

PubMed

Walker, Richard M; Zdero, Rad; McKee, Michael D; Waddell, James P; Schemitsch, Emil H

2011-12-01

The aim of the study was to investigate how superior entry point varies with tibial rotation and to identify landmarks that can be used to identify suitable radiographs for successful intramedullary nail insertion. The proximal tibia and knee were imaged for 12 cadaveric limbs undergoing 5° increments of internal and external rotation. Medial and lateral arthrotomies were performed, the ideal superior entry point was identified, and a 2-mm Kirschner wire inserted. A second Kirschner wire was sequentially placed at the 5-mm and then the 10-mm position, both medial and lateral to the initial Kirschner wire. Radiographs of the knee were obtained for all increments. The changing position of the ideal nail insertion point was recorded. A 30° arc (range, 25°-40°) provided a suitable anteroposterior radiograph. On the neutral anteroposterior radiograph, the Kirschner wire was 54% ± 1.5% (range, 51-56%) from the medial edge of the tibial plateau. For every 5° of rotation, the Kirschner wire moved 3% of the plateau width. During external rotation, a misleading medial entry point was obtained. A fibular bisector line correlated with an entry point that was ideal or up to 5 mm lateral to this but never medial. The film that best showed the fibular bisector line was between 0° and 10° of internal rotation of the tibia. The fibula head bisector line can be used to avoid choosing external rotation views and, thus, avoid medial insertion points. The current results may help the surgeon prevent malalignment during intramedullary nailing in proximal tibial fractures.

Incremental Reactivity Effects on Secondary Organic Aerosol Formation in Urban Atmospheres with and without Biogenic Influence

NASA Astrophysics Data System (ADS)

Kacarab, Mary; Li, Lijie; Carter, William P. L.; Cocker, David R., III

2016-04-01

Two different surrogate mixtures of anthropogenic and biogenic volatile organic compounds (VOCs) were developed to study secondary organic aerosol (SOA) formation at atmospheric reactivities similar to urban regions with varying biogenic influence levels. Environmental chamber simulations were designed to enable the study of the incremental aerosol formation from select anthropogenic (m-Xylene, 1,2,4-Trimethylbenzene, and 1-Methylnaphthalene) and biogenic (α-pinene) precursors under the chemical reactivity set by the two different surrogate mixtures. The surrogate reactive organic gas (ROG) mixtures were based on that used to develop the maximum incremental reactivity (MIR) factors for evaluation of O3 forming potential. Multiple incremental aerosol formation experiments were performed in the University of California Riverside (UCR) College of Engineering Center for Environmental Research and Technology (CE-CERT) dual 90m3 environmental chambers. Incremental aerosol yields were determined for each of the VOCs studied and compared to yields found from single precursor studies. Aerosol physical properties of density, volatility, and hygroscopicity were monitored throughout experiments. Bulk elemental chemical composition from high-resolution time of flight aerosol mass spectrometer (HR-ToF-AMS) data will also be presented. Incremental yields and SOA chemical and physical characteristics will be compared with data from previous single VOC studies conducted for these aerosol precursors following traditional VOC/NOx chamber experiments. Evaluation of the incremental effects of VOCs on SOA formation and properties are paramount in evaluating how to best extrapolate environmental chamber observations to the ambient atmosphere and provides useful insights into current SOA formation models. Further, the comparison of incremental SOA from VOCs in varying surrogate urban atmospheres (with and without strong biogenic influence) allows for a unique perspective on the impacts different compounds have on aerosol formation in different urban regions.

Implicit personality theory in evaluation of brand extensions.

PubMed

Flaherty, K E; Pappas, J M

2000-06-01

Transference, the extent to which consumers transfer their opinions of a parent brand to a new extension, is critical to the success of any brand-extension strategy. Past research has shown that transference is a complex process that varies among persons depending upon an implicit personality theory, entity versus incremental. In a laboratory experiment analysis of ratings for 100 21-yr.-old undergraduates of attitude, perceived fit and risk, prior product involvement, and implicit personality theory (entity versus incremental) the influence of consumers' implicit personality theory on transference was considered within the brand-extension context. As expected, the amount of transference differed between those espousing entity and incremental theories. "Entity theorists" were much more likely to transfer feelings associated with the parent brand to the new extension than were "incremental theorists" who did not rely on prior brand information when forming evaluations of a new extension. This effect did not occur when perceived fit between the parent brand and the extension was high.

A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraints

NASA Astrophysics Data System (ADS)

Maqbool, Fawad; Bambach, Markus

2017-10-01

Incremental sheet forming (ISF) is a manufacturing process most suitable for small-batch production of sheet metal parts. In ISF, a CNC-controlled tool moves over the sheet metal, following a specified contour to form a part of the desired geometry. This study focuses on one of the dominant process limitations associated with the ISF, i.e., the limited geometrical accuracy. In this regard, a case study is performed which shows that increased geometrical accuracy of the formed part can be achieved by a using stress-relief annealing before unclamping. To keep the tooling costs low, a modular die design consisting of a stiff metal frame and inserts made from inexpensive plastics (Sika®) were devised. After forming, the plastics inserts are removed. The metal frame supports the part during stress-relief annealing. Finite Element (FE) simulations of the manufacturing process are performed. Due to the residual stresses induced during the forming, the geometry of the formed part, from FE simulation and the actual manufacturing process, shows severe distortion upon unclamping the part. Stress relief annealing of the formed part under partial constraints exerted by the tool frame shows that a part with high geometrical accuracy can be obtained.

A Geostatistical Scaling Approach for the Generation of Non Gaussian Random Variables and Increments

NASA Astrophysics Data System (ADS)

Guadagnini, Alberto; Neuman, Shlomo P.; Riva, Monica; Panzeri, Marco

2016-04-01

We address manifestations of non-Gaussian statistical scaling displayed by many variables, Y, and their (spatial or temporal) increments. Evidence of such behavior includes symmetry of increment distributions at all separation distances (or lags) with sharp peaks and heavy tails which tend to decay asymptotically as lag increases. Variables reported to exhibit such distributions include quantities of direct relevance to hydrogeological sciences, e.g. porosity, log permeability, electrical resistivity, soil and sediment texture, sediment transport rate, rainfall, measured and simulated turbulent fluid velocity, and other. No model known to us captures all of the documented statistical scaling behaviors in a unique and consistent manner. We recently proposed a generalized sub-Gaussian model (GSG) which reconciles within a unique theoretical framework the probability distributions of a target variable and its increments. We presented an algorithm to generate unconditional random realizations of statistically isotropic or anisotropic GSG functions and illustrated it in two dimensions. In this context, we demonstrated the feasibility of estimating all key parameters of a GSG model underlying a single realization of Y by analyzing jointly spatial moments of Y data and corresponding increments. Here, we extend our GSG model to account for noisy measurements of Y at a discrete set of points in space (or time), present an algorithm to generate conditional realizations of corresponding isotropic or anisotropic random field, and explore them on one- and two-dimensional synthetic test cases.

Prediction of Path Deviation in Robot Based Incremental Sheet Metal Forming by Means of a New Solid-Shell Finite Element Technology and a Finite Elastoplastic Model with Combined Hardening

NASA Astrophysics Data System (ADS)

Kiliclar, Yalin; Laurischkat, Roman; Vladimirov, Ivaylo N.; Reese, Stefanie

2011-08-01

The presented project deals with a robot based incremental sheet metal forming process, which is called roboforming and has been developed at the Chair of Production Systems. It is characterized by flexible shaping using a freely programmable path-synchronous movement of two industrial robots. The final shape is produced by the incremental infeed of the forming tool in depth direction and its movement along the part contour in lateral direction. However, the resulting geometries formed in roboforming deviate several millimeters from the reference geometry. This results from the compliance of the involved machine structures and the springback effects of the workpiece. The project aims to predict these deviations caused by resiliences and to carry out a compensative path planning based on this prediction. Therefore a planning tool is implemented which compensates the robots's compliance and the springback effects of the sheet metal. The forming process is simulated by means of a finite element analysis using a material model developed at the Institute of Applied Mechanics (IFAM). It is based on the multiplicative split of the deformation gradient in the context of hyperelasticity and combines nonlinear kinematic and isotropic hardening. Low-order finite elements used to simulate thin sheet structures, such as used for the experiments, have the major problem of locking, a nonphysical stiffening effect. For an efficient finite element analysis a special solid-shell finite element formulation based on reduced integration with hourglass stabilization has been developed. To circumvent different locking effects, the enhanced assumed strain (EAS) and the assumed natural strain (ANS) concepts are included in this formulation. Having such powerful tools available we obtain more accurate geometries.

Bayesian change-point analyses in ecology

Treesearch

Brian Bekcage; Lawrence Joseph; Patrick Belisle; David B. Wolfson; William J. Platt

2007-01-01

Ecological and biological processes can change from one state to another once a threshold has been crossed in space or time. Threshold responses to incremental changes in underlying variables can characterize diverse processes from climate change to the desertification of arid lands from overgrazing.

Design of process parameters for the incremental tube forming (ITF) by FEM to control product properties

NASA Astrophysics Data System (ADS)

Nazari, Esmaeil; Löbbe, Christian; Gallus, Stefan; Izadyar, S. Ahmad; Tekkaya, A. Erman

2018-05-01

The incremental tube forming (ITF) is a process combination of the kinematic tube bending and spinning to shape high strength and tailored tubes with variable diameters and thicknesses. In contrast to conventional bending methods, the compressive stress superposition by the spinning process facilitates low bending stresses, so that geometrical errors are avoided and the shape accuracy is improved. The study reveals the interaction of plastic strains of the rolling and bending process through an explicit FEM investigation. For this purpose, the three-dimensional machine set-up is discretized and modeled in terms of the fully disclosed spinning process during the gradual deflection of the tube end for bending. The analysis shows that, depending on the forming tool shape, the stress superposition is accompanied by high plastic strains. Furthermore, this phenomenon is explained by the three dimensional normal and shear strains during the incremental spinning. Analyzing the strains history also shows a nonlinearity between the strains by bending and spinning. It is also shown that process parameters like rotational velocity of the spinning rolls have a huge influence on the deformation pattern. Finally, the method is used for the manufacturing of an example product, which reveals the high process flexibility. In one clamp a component with a graded wall thickness and outside diameter along the longitudinal axis is produced.

Incremental Learning of Context Free Grammars by Parsing-Based Rule Generation and Rule Set Search

NASA Astrophysics Data System (ADS)

Nakamura, Katsuhiko; Hoshina, Akemi

This paper discusses recent improvements and extensions in Synapse system for inductive inference of context free grammars (CFGs) from sample strings. Synapse uses incremental learning, rule generation based on bottom-up parsing, and the search for rule sets. The form of production rules in the previous system is extended from Revised Chomsky Normal Form A→βγ to Extended Chomsky Normal Form, which also includes A→B, where each of β and γ is either a terminal or nonterminal symbol. From the result of bottom-up parsing, a rule generation mechanism synthesizes minimum production rules required for parsing positive samples. Instead of inductive CYK algorithm in the previous version of Synapse, the improved version uses a novel rule generation method, called ``bridging,'' which bridges the lacked part of the derivation tree for the positive string. The improved version also employs a novel search strategy, called serial search in addition to minimum rule set search. The synthesis of grammars by the serial search is faster than the minimum set search in most cases. On the other hand, the size of the generated CFGs is generally larger than that by the minimum set search, and the system can find no appropriate grammar for some CFL by the serial search. The paper shows experimental results of incremental learning of several fundamental CFGs and compares the methods of rule generation and search strategies.

Numerical simulation of high speed incremental forming of aluminum alloy

NASA Astrophysics Data System (ADS)

Giuseppina, Ambrogio; Teresa, Citrea; Luigino, Filice; Francesco, Gagliardi

2013-12-01

In this study, an innovative process is analyzed with the aim to satisfy the industrial requirements, such as process flexibility, differentiation and customizing of products, cost reduction, minimization of execution time, sustainable production, etc. The attention is focused on incremental forming process, nowadays used in different fields such as: rapid prototyping, medical sector, architectural industry, aerospace and marine, in the production of molds and dies. Incremental forming consists in deforming only a small region of the workspace through a punch driven by a NC machine. SPIF is the considered variant of the process, in which the punch gives local deformation without dies and molds; consequently, the final product geometry can be changed by the control of an actuator without requiring a set of different tools. The drawback of this process is its slowness. The aim of this study is to assess the IF feasibility at high speeds. An experimental campaign will be performed by a CNC lathe with high speed to test process feasibility and the influence on materials formability mainly on aluminum alloys. The first results show how the material presents the same performance than in conventional speed IF and, in some cases, better material behavior due to the temperature field. An accurate numerical simulation has been performed to investigate the material behavior during the high speed process substantially confirming experimental evidence.

CRITICAL THERMAL INCREMENTS FOR RHYTHMIC RESPIRATORY MOVEMENTS OF INSECTS

PubMed Central

Crozier, W. J.; Stier, T. B.

1925-01-01

The rhythm of abdominal respiratory movements in various insects, aquatic and terrestrial, is shown to possess critical increments 11,500± or 16,500± calories (Libellula, Dixippus, Anax). These are characteristic of processes involved in respiration, and definitely differ from the increment 12,200 calories which is found in a number of instances of (non-respiratory) rhythmic neuromuscular activities of insects and other arthropods. With grasshoppers (Melanoplus), normal or freshly decapitated, the critical increment is 7,900, again a value encountered in connection with some phenomena of gaseous exchange and agreeing well with the value obtained for CO2 output in Melanoplus. It is shown that by decapitation the temperature characteristic for abdominal rhythm, in Melanoplus, is changed to 16,500, then to 11,300—depending upon the time since decapitation; intermediate values do not appear. The frequency of the respiratory movements seems to be controlled by a metabolically distinct group of neurones. The bearing of these results upon the theory of functional analysis by means of temperature characteristics is discussed, and it is pointed out that a definite standpoint becomes available from which to attempt the specific control of vital processes. PMID:19872148

CRITICAL THERMAL INCREMENTS FOR RHYTHMIC RESPIRATORY MOVEMENTS OF INSECTS.

PubMed

Crozier, W J; Stier, T B

1925-01-20

The rhythm of abdominal respiratory movements in various insects, aquatic and terrestrial, is shown to possess critical increments 11,500+/- or 16,500+/- calories (Libellula, Dixippus, Anax). These are characteristic of processes involved in respiration, and definitely differ from the increment 12,200 calories which is found in a number of instances of (non-respiratory) rhythmic neuromuscular activities of insects and other arthropods. With grasshoppers (Melanoplus), normal or freshly decapitated, the critical increment is 7,900, again a value encountered in connection with some phenomena of gaseous exchange and agreeing well with the value obtained for CO(2) output in Melanoplus. It is shown that by decapitation the temperature characteristic for abdominal rhythm, in Melanoplus, is changed to 16,500, then to 11,300-depending upon the time since decapitation; intermediate values do not appear. The frequency of the respiratory movements seems to be controlled by a metabolically distinct group of neurones. The bearing of these results upon the theory of functional analysis by means of temperature characteristics is discussed, and it is pointed out that a definite standpoint becomes available from which to attempt the specific control of vital processes.

Physiological Responses during Cycling With Oval Chainrings (Q-Ring) and Circular Chainrings.

PubMed

Cordova, Alfredo; Latasa, Iban; Seco, Jesus; Villa, Gerardo; Rodriguez-Falces, Javier

2014-05-01

The aim of this study was to compare the physiological responses of cyclists using round (C-ring) or oval (Q-ring) chainrings during an incremental test until exhaustion. Following a randomized design, twelve male elite cyclists [age (mean ± SD): 21.1 ± 2.1 yr; VO2max: 78.1 ± 5.3 mL·kg(-1)min(-1)] performed two incremental maximal tests separated by 48 h (one with C-rings, the other with Q-rings). Starting at 100 W, the workload was increased by 25 W every 3 min until volitional exhaustion. Maximal heart rate, power output and oxygen consumption were compared. Blood lactate was monitored throughout the test. After the incremental test, 4 intermittent 20-s maximal sprints with a 60-s recovery period in between were performed. Maximal isometric voluntary contractions were performed at rest and immediately after each 20-s maximal sprint, and the force and EMG RMS amplitude were recorded from the vastus medialis and vastus lateralis muscles. For the incremental exercise test, no significant differences were found in the maximal power output (P=0.12), oxygen consumption (P=0.39), and heart rate (P=0.32) between Q-rings and C-rings. Throughout the incremental test, lactate levels were comparable when using both the C-rings and Q-rings (P=0.47). During the short sprints, power output was 2.5-6.5% greater for Q-rings than for C-rings (P=0.22). The decline in EMG RMS amplitude observed during the incremental tests was comparable for Q-rings and C-rings (0.42). These findings indicate that the oval chainring design, presented here as "Q-rings", did not significantly influence the physiological response to an incremental exercise test as compared to a conventional chainring. Key pointsDuring the incremental exercise test, no significant differences were found in power output, oxygen consumption or heart rate between oval "Q-rings" and conventional chainrings.Over the course of the incremental test, blood lactate levels were comparable for the oval "Q-rings" and conventional chainrings.During the short sprints performed after the incremental test, there were no statistical differences in power production between oval "Q-rings" and conventional chainrings.

Predictive optimized adaptive PSS in a single machine infinite bus.

PubMed

Milla, Freddy; Duarte-Mermoud, Manuel A

2016-07-01

Power System Stabilizer (PSS) devices are responsible for providing a damping torque component to generators for reducing fluctuations in the system caused by small perturbations. A Predictive Optimized Adaptive PSS (POA-PSS) to improve the oscillations in a Single Machine Infinite Bus (SMIB) power system is discussed in this paper. POA-PSS provides the optimal design parameters for the classic PSS using an optimization predictive algorithm, which adapts to changes in the inputs of the system. This approach is part of small signal stability analysis, which uses equations in an incremental form around an operating point. Simulation studies on the SMIB power system illustrate that the proposed POA-PSS approach has better performance than the classical PSS. In addition, the effort in the control action of the POA-PSS is much less than that of other approaches considered for comparison. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Formability behavior studies on CP-Al sheets processed through the helical tool path of incremental forming process

NASA Astrophysics Data System (ADS)

Markanday, H.; Nagarajan, D.

2018-02-01

Incremental sheet forming (ISF) is a novel die-less sheet metal forming process, which can produce components directly from the CAD geometry using a CNC milling machine at less production time and cost. The formability of the sheet material used is greatly affected by the process parameters involved and tool path adopted, and the present study is aimed to investigate the influence of different process parameter values using the helical tool path strategy on the formability of a commercial pure Al and to achieve maximum formability in the material. ISF experiments for producing an 80 mm diameter axisymmetric dome were carried out on 2 mm thickness commercially pure Al sheets for different tool speeds and feed rates in a CNC milling machine with a 10 mm hemispherical forming tool. The obtained parts were analyzed for springback, amount of thinning and maximum forming depth. The results showed that when the tool speed was increased by keeping the feed rate constant, the forming depth and thinning were also increased. On contrary, when the feed rate was increased by keeping the tool speed constant, the forming depth and thinning were decreased. Springback was found to be higher when the feed rate was increased rather than the tool speed was increased.

Annual Sediment Budgets for Newly Formed Point Bars on Powder River, Montana, USA

NASA Astrophysics Data System (ADS)

Moody, John; Meade, Robert

2013-04-01

Morphodynamic processes have been monitored for 37 years on Powder River, a large, unregulated meandering river that drains an area of about 35,000 km2 in northeastern Wyoming and southeastern Montana, USA. Cross-sectional surveys of the channel and adjacent floodplains and terraces have been measured nearly annually (30 out of 37 years) by the U.S. Geological Survey (USGS) at 24 locations along 90 kilometers of the river. This long-term data set has provided insights into the natural morphological and sedimentary processes; and most recently, into the annual sediment budgets for three point bars that were created when an extreme flood in 1978 cut new channels across the necks of two former meander bends and radically shifted the location of a third bend. Because our cross-sectional surveys are generally made only once a year (during the low-flow period, usually September-October), we record only the net change in thickness of the annual deposition and erosion because some areas on a point bar may be scoured and refilled during multiple floods in a year. Point-bar sediment budgets vary spatially as well as annually. The long-term average of the net annual sediment budgets during the post-1978 years (n=26 surveys) indicates that the average annual increment of new sediment deposited on the three point bars has been three to four times the average annual increment of old sediment eroded from the point bars. This annual deposition-to-erosion ratio has varied at one point bar from a minimum of 0.14 (1986) to maximum of 275 (1995). At the other two point-bar sites the ratio ranged from 0.18 (1991) to 265 (2008) and from 0.023 (1980) to 479 (1987). The lack of correlation from year to year or from one point bar to the next suggests the importance of differences in the planimetric configurations and hydraulic histories of each point bar in the evolutionary process. All the deposited sediment we measured during an annual survey represents the same sediment year class, whereas the eroded sediment we measured is composed of different proportions of previous sediment year classes. An index of the preservation (completeness) of these sediment year classes was defined for each point-bar as the percent of the initial deposit (older than 10 years) that was still remaining in 2011. The average (n=20 surveys) completeness was 59, 81, and 64%, and in general, deposits had better chances for being preserved if they were deposited higher on the point bar surface, or if they were covered by new deposition in the following year. Net annual deposition correlated only weakly with annual peak water discharge, and we found no correlation between annual peak water discharge and the amount of sediment eroded from the point bars. These low correlations may be the result of our using only net deposition and erosion values, and not the total deposition and erosion. These results illustrate the dynamic nature of point bars that adds an important component to earlier uniform, lateral accretion models of point bars. This dynamic nature produces a range of vegetation year classes, and thus, a rich diverse habitat for terrestrial and aquatic populations. This abstract has described one application of this unique long-term data set, and the authors will be pleased to provide the data set to anyone who might need long-term fluvial geomorphic data to address other research questions such as floodplain contaminant storage, river restoration, and environmental change.

Incremental Multi-view 3D Reconstruction Starting from Two Images Taken by a Stereo Pair of Cameras

NASA Astrophysics Data System (ADS)

El hazzat, Soulaiman; Saaidi, Abderrahim; Karam, Antoine; Satori, Khalid

2015-03-01

In this paper, we present a new method for multi-view 3D reconstruction based on the use of a binocular stereo vision system constituted of two unattached cameras to initialize the reconstruction process. Afterwards , the second camera of stereo vision system (characterized by varying parameters) moves to capture more images at different times which are used to obtain an almost complete 3D reconstruction. The first two projection matrices are estimated by using a 3D pattern with known properties. After that, 3D scene points are recovered by triangulation of the matched interest points between these two images. The proposed approach is incremental. At each insertion of a new image, the camera projection matrix is estimated using the 3D information already calculated and new 3D points are recovered by triangulation from the result of the matching of interest points between the inserted image and the previous image. For the refinement of the new projection matrix and the new 3D points, a local bundle adjustment is performed. At first, all projection matrices are estimated, the matches between consecutive images are detected and Euclidean sparse 3D reconstruction is obtained. So, to increase the number of matches and have a more dense reconstruction, the Match propagation algorithm, more suitable for interesting movement of the camera, was applied on the pairs of consecutive images. The experimental results show the power and robustness of the proposed approach.

The application of large amplitude oscillatory stress in a study of fully formed fibrin clots

NASA Astrophysics Data System (ADS)

Lamer, T. F.; Thomas, B. R.; Curtis, D. J.; Badiei, N.; Williams, P. R.; Hawkins, K.

2017-12-01

The suitability of controlled stress large amplitude oscillatory shear (LAOStress) for the characterisation of the nonlinear viscoelastic properties of fully formed fibrin clots is investigated. Capturing the rich nonlinear viscoelastic behaviour of the fibrin network is important for understanding the structural behaviour of clots formed in blood vessels which are exposed to a wide range of shear stresses. We report, for the first time, that artefacts due to ringing exist in both the sample stress and strain waveforms of a LAOStress measurement which will lead to errors in the calculation of nonlinear viscoelastic properties. The process of smoothing the waveforms eliminates these artefacts whilst retaining essential rheological information. Furthermore, we demonstrate the potential of LAOStress for characterising the nonlinear viscoelastic properties of fibrin clots in response to incremental increases of applied stress up to the point of fracture. Alternating LAOStress and small amplitude oscillatory shear measurements provide detailed information of reversible and irreversible structural changes of the fibrin clot as a consequence of elevated levels of stress. We relate these findings to previous studies involving large scale deformations of fibrin clots. The LAOStress technique may provide useful information to help understand why some blood clots formed in vessels are stable (such as in deep vein thrombosis) and others break off (leading to a life threatening pulmonary embolism).

STEAM FORMING NEUTRONIC REACTOR AND METHOD OF OPERATING IT

DOEpatents

Untermyer, S.

1960-05-10

The heterogeneous reactor is liquid moderated and cooled by a steam forming coolant and is designed to produce steam from the coolant directly within the active portion of the reactor while avoiding the formation of bubbles in the liquid moderator. This reactor achieves inherent stability as a result of increased neutron leakage and increased neutron resonance absorption in the U/sup 238/ fuel with the formation of bubbles. The invention produces certain conditions under which the formation of vapor bubbles as a result of a neutron flux excursion from the injection of a reactivity increment into the reactor will operate to nullify the reactivity increment within a sufficiently short period of time to prevent unsafe reactor operating conditions from developing. This is obtained by disposing a plurality of fuel elements within a mass of steam forming coolant in the core with the ratio of the volume of steam forming coolant to the volume of fissionable isotopes being within the range yielding a multiplication factor greater than unity and a negative reactivity to core void coefficient at the boiling temperature of the coolant.

Associations of changes in exercise level with subsequent disability among seniors: a 16-year longitudinal study.

PubMed

Berk, David R; Hubert, Helen B; Fries, James F

2006-01-01

The effect of changes in physical exercise on progression of musculoskeletal disability in seniors has rarely been studied. We studied a prospective cohort annually from 1984 to 2000 using the Health Assessment Questionnaire Disability Index (HAQ-DI). The cohort included 549 participants, 73% men, with average end-of-study age of 74 years. At baseline and at the end of the study, participants were classified as "High" or "Low" vigorous exercisers using a cut-point of 60 min/wk. Four groups were formed: "Sedentary" (Low-->Low; N = 71), "Exercise Increasers" (Low-->High; N = 27), "Exercise Decreasers" (High-->Low; N = 73), and "Exercisers" (High-->High; N = 378). The primary dependent variable was change in HAQ-DI score (scored 0-3) from 1984 to 2000. Multivariate statistical adjustments using analysis of covariance included age, gender, and changes in three risk factors, body mass index, smoking status, and number of comorbid conditions. Participants also prospectively provided reasons for exercise changes. At baseline, Sedentary and Increasers averaged little exercise (16 and 22 exercise min/wk), whereas Exercisers and Decreasers averaged over 10 times more (285 and 212 exercise min/wk; p <.001). All groups had low initial HAQ-DI scores, ranging from 0.03 to 0.08. Increasers and Exercisers achieved the smallest increments in HAQ-DI score (0.17 and 0.11) over 16 years, whereas Decreasers and Sedentary fared more poorly (increments 0.27 and 0.37). Changes in HAQ-DI score for Increasers compared to Sedentary were significantly more favorable (p <.05) even after multivariate statistical adjustment. Inactive participants who increased exercise achieved excellent end-of-study values with increments in disability similar to those participants who were more active throughout. These results suggest a beneficial effect of exercise, even when begun later in life, on postponement of disability.

Motion of a cylinder adjacent to a free-surface: flow patterns and loading

NASA Astrophysics Data System (ADS)

Zhu, Q.; Lin, J.-C.; Unal, M. F.; Rockwell, D.

The flow structure and loading due to combined translatory and sinusoidal motion of a cylinder adjacent to a free-surface are characterized using a cinema technique of high-image-density particle image velocimetry and simultaneous force measurements. The instantaneous patterns of vorticity and streamline topology are interpreted as a function of degree of submergence beneath the free-surface. The relative magnitudes of the peak vorticity and the circulation of vortices formed from the upper and lower surfaces of the cylinder, as well as vortex formation from the free-surface, are remarkably affected by the nominal submergence. The corresponding streamline topology, interpreted in terms of foci, saddle points, and multiple separation and reattachment points also exhibit substantial changes with submergence. All of these features affect the instantaneous loading of the cylinder. Calculation of instantaneous moments of vorticity and the incremental changes in these moments during the cylinder motion allow identification of those vortices that contribute most substantially to the instantaneous lift and drag. Furthermore, the calculated moments are in general accord with the time integrals of the measured lift and drag acting on the cylinder for sufficiently large submergence.

Sensitivity of the acid-base properties of clays to the methods of preparation and measurement. 2. Evidence from continuous potentiometric titrations.

PubMed

Duc, Myriam; Gaboriaud, Fabien; Thomas, Fabien

2005-09-01

The effects of experimental procedures on the acid-base consumption titration curves of montmorillonite suspension were studied using continuous potentiometric titration. For that purpose, the hysteresis amplitudes between the acid and base branches were found to be useful to systematically evaluate the impacts of storage conditions (wet or dried), the atmosphere in titration reactor, the solid-liquid ratio, the time interval between successive increments, and the ionic strength. In the case of storage conditions, the increase of the hysteresis was significantly higher for longer storage of clay in suspension and drying procedures compared to "fresh" clay suspension. The titration carried out under air demonstrated carbonate contamination that could only be cancelled by performing experiments under inert gas. Interestingly, the increase of the time intervals between successive increments of titrant strongly emphasized the amplitude of hysteresis, which could be correlated with the slow kinetic process specifically observed for acid addition in acid media. Thus, such kinetic behavior is probably associated with dissolution processes of clay particles. However, the resulting curves recorded at different ionic strengths under optimized conditions did not show the common intersection point required to define point of zero charge. Nevertheless, the ionic strength dependence of the point of zero net proton charge suggested that the point of zero charge of sodic montmorillonite could be estimated as lower than 5.

Alternatives to the Six-Minute Walk Test in Pulmonary Arterial Hypertension

PubMed Central

Mainguy, Vincent; Malenfant, Simon; Neyron, Anne-Sophie; Saey, Didier; Maltais, François; Bonnet, Sébastien; Provencher, Steeve

2014-01-01

Introduction The physiological response during the endurance shuttle walk test (ESWT), the cycle endurance test (CET) and the incremental shuttle walk test (ISWT) remains unknown in PAH. We tested the hypothesis that endurance tests induce a near-maximal physiological demand comparable to incremental tests. We also hypothesized that differences in respiratory response during exercise would be related to the characteristics of the exercise tests. Methods Within two weeks, twenty-one PAH patients (mean age: 54(15) years; mean pulmonary arterial pressure: 42(12) mmHg) completed two cycling exercise tests (incremental cardiopulmonary cycling exercise test (CPET) and CET) and three field tests (ISWT, ESWT and six-minute walk test (6MWT)). Physiological parameters were continuously monitored using the same portable telemetric device. Results Peak oxygen consumption (VO2peak) was similar amongst the five exercise tests (p = 0.90 by ANOVA). Walking distance correlated markedly with the VO2peak reached during field tests, especially when weight was taken into account. At 100% exercise, most physiological parameters were similar between incremental and endurance tests. However, the trends overtime differed. In the incremental tests, slopes for these parameters rose steadily over the entire duration of the tests, whereas in the endurance tests, slopes rose sharply from baseline to 25% of maximum exercise at which point they appeared far less steep until test end. Moreover, cycling exercise tests induced higher respiratory exchange ratio, ventilatory demand and enhanced leg fatigue measured subjectively and objectively. Conclusion Endurance tests induce a maximal physiological demand in PAH. Differences in peak respiratory response during exercise are related to the modality (cycling vs. walking) rather than the progression (endurance vs. incremental) of the exercise tests. PMID:25111294

Alternatives to the six-minute walk test in pulmonary arterial hypertension.

PubMed

Mainguy, Vincent; Malenfant, Simon; Neyron, Anne-Sophie; Saey, Didier; Maltais, François; Bonnet, Sébastien; Provencher, Steeve

2014-01-01

The physiological response during the endurance shuttle walk test (ESWT), the cycle endurance test (CET) and the incremental shuttle walk test (ISWT) remains unknown in PAH. We tested the hypothesis that endurance tests induce a near-maximal physiological demand comparable to incremental tests. We also hypothesized that differences in respiratory response during exercise would be related to the characteristics of the exercise tests. Within two weeks, twenty-one PAH patients (mean age: 54(15) years; mean pulmonary arterial pressure: 42(12) mmHg) completed two cycling exercise tests (incremental cardiopulmonary cycling exercise test (CPET) and CET) and three field tests (ISWT, ESWT and six-minute walk test (6MWT)). Physiological parameters were continuously monitored using the same portable telemetric device. Peak oxygen consumption (VO(2peak)) was similar amongst the five exercise tests (p = 0.90 by ANOVA). Walking distance correlated markedly with the VO(2peak) reached during field tests, especially when weight was taken into account. At 100% exercise, most physiological parameters were similar between incremental and endurance tests. However, the trends overtime differed. In the incremental tests, slopes for these parameters rose steadily over the entire duration of the tests, whereas in the endurance tests, slopes rose sharply from baseline to 25% of maximum exercise at which point they appeared far less steep until test end. Moreover, cycling exercise tests induced higher respiratory exchange ratio, ventilatory demand and enhanced leg fatigue measured subjectively and objectively. Endurance tests induce a maximal physiological demand in PAH. Differences in peak respiratory response during exercise are related to the modality (cycling vs. walking) rather than the progression (endurance vs. incremental) of the exercise tests.

Subroutines GEORGE and DRASTC simplify operation of automatic digital plotter

NASA Technical Reports Server (NTRS)

Englel, F., III; Gray, W. H.; Richard, P. J.

1967-01-01

FORTRAN language subroutines enable the production of a tape for a 360-30 tape unit that controls the CALCOMP 566 Digital Incremental Plotter. This provides the plotter with instructions for graphically displaying data points with the proper scaling of axes, numbering, lettering, and tic marking.

Numerical study of aero-excitation of steam-turbine rotor blade self-oscillations

NASA Astrophysics Data System (ADS)

Galaev, S. A.; Makhnov, V. Yu.; Ris, V. V.; Smirnov, E. M.

2018-05-01

Blade aero-excitation increment is evaluated by numerical solution of the full 3D unsteady Reynolds-averaged Navier-Stokes equations governing wet steam flow in a powerful steam-turbine last stage. The equilibrium wet steam model was adopted. Blade surfaces oscillations are defined by eigen-modes of a row of blades bounded by a shroud. Grid dependency study was performed with a reduced model being a set of blades multiple an eigen-mode nodal diameter. All other computations were carried out for the entire blade row. Two cases are considered, with an original-blade row and with a row of modified (reinforced) blades. Influence of eigen-mode nodal diameter and blade reinforcing on aero-excitation increment is analyzed. It has been established, in particular, that maximum value of the aero-excitation increment for the reinforced-blade row is two times less as compared with the original-blade row. Generally, results of the study point definitely to less probability of occurrence of blade self-oscillations in case of the reinforced blade-row.

Incremental learning of skill collections based on intrinsic motivation

PubMed Central

Metzen, Jan H.; Kirchner, Frank

2013-01-01

Life-long learning of reusable, versatile skills is a key prerequisite for embodied agents that act in a complex, dynamic environment and are faced with different tasks over their lifetime. We address the question of how an agent can learn useful skills efficiently during a developmental period, i.e., when no task is imposed on him and no external reward signal is provided. Learning of skills in a developmental period needs to be incremental and self-motivated. We propose a new incremental, task-independent skill discovery approach that is suited for continuous domains. Furthermore, the agent learns specific skills based on intrinsic motivation mechanisms that determine on which skills learning is focused at a given point in time. We evaluate the approach in a reinforcement learning setup in two continuous domains with complex dynamics. We show that an intrinsically motivated, skill learning agent outperforms an agent which learns task solutions from scratch. Furthermore, we compare different intrinsic motivation mechanisms and how efficiently they make use of the agent's developmental period. PMID:23898265

A new approach to impulsive rendezvous near circular orbit

NASA Astrophysics Data System (ADS)

Carter, Thomas; Humi, Mayer

2012-04-01

A new approach is presented for the problem of planar optimal impulsive rendezvous of a spacecraft in an inertial frame near a circular orbit in a Newtonian gravitational field. The total characteristic velocity to be minimized is replaced by a related characteristic-value function and this related optimization problem can be solved in closed form. The solution of this problem is shown to approach the solution of the original problem in the limit as the boundary conditions approach those of a circular orbit. Using a form of primer-vector theory the problem is formulated in a way that leads to relatively easy calculation of the optimal velocity increments. A certain vector that can easily be calculated from the boundary conditions determines the number of impulses required for solution of the optimization problem and also is useful in the computation of these velocity increments. Necessary and sufficient conditions for boundary conditions to require exactly three nonsingular non-degenerate impulses for solution of the related optimal rendezvous problem, and a means of calculating these velocity increments are presented. A simple example of a three-impulse rendezvous problem is solved and the resulting trajectory is depicted. Optimal non-degenerate nonsingular two-impulse rendezvous for the related problem is found to consist of four categories of solutions depending on the four ways the primer vector locus intersects the unit circle. Necessary and sufficient conditions for each category of solutions are presented. The region of the boundary values that admit each category of solutions of the related problem are found, and in each case a closed-form solution of the optimal velocity increments is presented. Similar results are presented for the simpler optimal rendezvous that require only one-impulse. For brevity degenerate and singular solutions are not discussed in detail, but should be presented in a following study. Although this approach is thought to provide simpler computations than existing methods, its main contribution may be in establishing a new approach to the more general problem.

Data mining for signals in spontaneous reporting databases: proceed with caution.

PubMed

Stephenson, Wendy P; Hauben, Manfred

2007-04-01

To provide commentary and points of caution to consider before incorporating data mining as a routine component of any Pharmacovigilance program, and to stimulate further research aimed at better defining the predictive value of these new tools as well as their incremental value as an adjunct to traditional methods of post-marketing surveillance. Commentary includes review of current data mining methodologies employed and their limitations, caveats to consider in the use of spontaneous reporting databases and caution against over-confidence in the results of data mining. Future research should focus on more clearly delineating the limitations of the various quantitative approaches as well as the incremental value that they bring to traditional methods of pharmacovigilance.

49 CFR Appendix A to Part 611 - Description of Measures Used for Project Evaluation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... within 1/2-mile of boarding points associated with the proposed system increment. (b) Environmental... in British Thermal Units (BTU), compared to the baseline alternative; and (3) Current Environmental...) Transit-supportive corridor policies; (5) Supportive zoning regulations near transit stations; (6) Tools...

40 CFR 60.54 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... at each point for equal increments of time. (2) Excess air measurements may be used to determine the... Section 60.54 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... “adjusted” CO2 concentration [(%CO2)adj], which accounts for the effects of CO2 absorption and dilution air...

Incremental Testing of the Community Multiscale Air Quality (CMAQ) Modeling System Version 4.7

EPA Science Inventory

This paper describes the scientific and structural updates to the latest release of the Community Multiscale Air Quality (CMAQ) modeling system version 4.7 (v4.7) and points the reader to additional resources for further details. The model updates were evaluated relative to obse...

A study on the uniqueness of the plastic flow direction for granular assemblies of ductile particles using discrete finite-element simulations

NASA Astrophysics Data System (ADS)

Abdelmoula, Nouha; Harthong, Barthélémy; Imbault, Didier; Dorémus, Pierre

2017-12-01

The multi-particle finite element method involving assemblies of meshed particles interacting through finite-element contact conditions is adopted to study the plastic flow of a granular material with highly deformable elastic-plastic grains. In particular, it is investigated whether the flow rule postulate applies for such materials. Using a spherical stress probing method, the influence of incremental stress on plastic strain increment vectors was assessed for numerical samples compacted along two different loading paths up to different values of relative density. Results show that the numerical samples studied behave reasonably well according to an associated flow rule, except in the vicinity of the loading point where the influence of the stress increment proved to be very significant. A plausible explanation for the non-uniqueness of the direction of plastic flow is proposed, based on the idea that the resistance of the numerical sample to plastic straining can vary by an order of magnitude depending on the direction of the accumulated stress. The above-mentioned dependency of the direction of plastic flow on the direction of the stress increment was related to the difference in strength between shearing and normal stressing at the scale of contact surfaces between particles.

Quantitative FE-EPMA measurement of formation and inhibition of carbon contamination on Fe for trace carbon analysis.

PubMed

Tanaka, Yuji; Yamashita, Takako; Nagoshi, Masayasu

2017-04-01

Hydrocarbon contamination introduced during point, line and map analyses in a field emission electron probe microanalysis (FE-EPMA) was investigated to enable reliable quantitative analysis of trace amounts of carbon in steels. The increment of contamination on pure iron in point analysis is proportional to the number of iterations of beam irradiation, but not to the accumulated irradiation time. A combination of a longer dwell time and single measurement with a liquid nitrogen (LN2) trap as an anti-contamination device (ACD) is sufficient for a quantitative point analysis. However, in line and map analyses, contamination increases with irradiation time in addition to the number of iterations, even though the LN2 trap and a plasma cleaner are used as ACDs. Thus, a shorter dwell time and single measurement are preferred for line and map analyses, although it is difficult to eliminate the influence of contamination. While ring-like contamination around the irradiation point grows during electron-beam irradiation, contamination at the irradiation point increases during blanking time after irradiation. This can explain the increment of contamination in iterative point analysis as well as in line and map analyses. Among the ACDs, which are tested in this study, specimen heating at 373 K has a significant contamination inhibition effect. This technique makes it possible to obtain line and map analysis data with minimum influence of contamination. The above-mentioned FE-EPMA data are presented and discussed in terms of the contamination-formation mechanisms and the preferable experimental conditions for the quantification of trace carbon in steels. © The Author 2016. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Data driven modeling of plastic deformation

DOE PAGES

Versino, Daniele; Tonda, Alberto; Bronkhorst, Curt A.

2017-05-01

In this paper the application of machine learning techniques for the development of constitutive material models is being investigated. A flow stress model, for strain rates ranging from 10 –4 to 10 12 (quasi-static to highly dynamic), and temperatures ranging from room temperature to over 1000 K, is obtained by beginning directly with experimental stress-strain data for Copper. An incrementally objective and fully implicit time integration scheme is employed to integrate the hypo-elastic constitutive model, which is then implemented into a finite element code for evaluation. Accuracy and performance of the flow stress models derived from symbolic regression are assessedmore » by comparison to Taylor anvil impact data. The results obtained with the free-form constitutive material model are compared to well-established strength models such as the Preston-Tonks-Wallace (PTW) model and the Mechanical Threshold Stress (MTS) model. Here, preliminary results show candidate free-form models comparing well with data in regions of stress-strain space with sufficient experimental data, pointing to a potential means for both rapid prototyping in future model development, as well as the use of machine learning in capturing more data as a guide for more advanced model development.« less

The Green's function in a channel with a sound-absorbing cover in the case of a uniform flow

NASA Astrophysics Data System (ADS)

Sobolev, A. F.

2012-07-01

We study the modal structure of an acoustic field of a point source as function of channel wall admittance in the case of a two-dimensional channel. The characteristic equation for determining the eigen-values corresponding to the boundary problem is studied in the form of this equation's dependence on the admittance, which varies in the entire complex plane. All modes, without exception, existing in the channel and forming the source field are classified based on the obtained topography of the characteristic equation. The expressions that describe the amplitudes and spatial distribution of the hydrodynamic modes, attenuation rate (for stable modes), or increment (for unstable modes) were obtained as functions of the wall admittance and flow velocity. It is shown that in addition to the hydrodynamic unstable modes existing downstream from the source, hydrodynamic unstable modes exist upstream from the source at any admittance. They appear only when the admittance has an elastic character. It is shown that hydrodynamic modes are induced only in the case when the source is located close to the wall or on the wall. The amplitude of these modes decreases exponentially with distance from the wall.

Data driven modeling of plastic deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Versino, Daniele; Tonda, Alberto; Bronkhorst, Curt A.

In this paper the application of machine learning techniques for the development of constitutive material models is being investigated. A flow stress model, for strain rates ranging from 10 –4 to 10 12 (quasi-static to highly dynamic), and temperatures ranging from room temperature to over 1000 K, is obtained by beginning directly with experimental stress-strain data for Copper. An incrementally objective and fully implicit time integration scheme is employed to integrate the hypo-elastic constitutive model, which is then implemented into a finite element code for evaluation. Accuracy and performance of the flow stress models derived from symbolic regression are assessedmore » by comparison to Taylor anvil impact data. The results obtained with the free-form constitutive material model are compared to well-established strength models such as the Preston-Tonks-Wallace (PTW) model and the Mechanical Threshold Stress (MTS) model. Here, preliminary results show candidate free-form models comparing well with data in regions of stress-strain space with sufficient experimental data, pointing to a potential means for both rapid prototyping in future model development, as well as the use of machine learning in capturing more data as a guide for more advanced model development.« less

Geometrically Nonlinear Finite Element Analysis of a Composite Space Reflector

NASA Technical Reports Server (NTRS)

Lee, Kee-Joo; Leet, Sung W.; Clark, Greg; Broduer, Steve (Technical Monitor)

2001-01-01

Lightweight aerospace structures, such as low areal density composite space reflectors, are highly flexible and may undergo large deflection under applied loading, especially during the launch phase. Accordingly, geometrically nonlinear analysis that takes into account the effect of finite rotation may be needed to determine the deformed shape for a clearance check and the stress and strain state to ensure structural integrity. In this study, deformation of the space reflector is determined under static conditions using a geometrically nonlinear solid shell finite element model. For the solid shell element formulation, the kinematics of deformation is described by six variables that are purely vector components. Because rotational angles are not used, this approach is free of the limitations of small angle increments. This also allows easy connections between substructures and large load increments with respect to the conventional shell formulation using rotational parameters. Geometrically nonlinear analyses were carried out for three cases of static point loads applied at selected points. A chart shows results for a case when the load is applied at the center point of the reflector dish. The computed results capture the nonlinear behavior of the composite reflector as the applied load increases. Also, they are in good agreement with the data obtained by experiments.

Correlation of the plasma sphingoid base profile with results from oral glucose tolerance tests in gestational diabetes mellitus

PubMed Central

Khan, Abad; Hornemann, Thorsten

2017-01-01

Oral glucose tolerance test (OGTT) is usually insufficient to accurately predict the risk for type 2 diabetes mellitus (T2DM), it is therefore necessary to identify an additional biomarker that would most likely improve the accuracy of OGTT. The current OGTT was performed in 53 volunteers after ingestion of 75 g glucose in 250 ml water to each volunteer. Similarly the sphingoid base profile of these volunteers was explored using liquid-chromatography linked with mass spectrometer (LC-MS) and correlated with the different time-points glucose values of OGTT as well as with total area under the curve (tAUC), incremental area under the curve (iAUC), and positive incremental area under the curve (pAUC). The findings showed that 1-deoxysphinganine (1-deoxySA) was significantly positively correlated with the 1-hour, 2-hour, and 3-hour plasma glucose level as well as with total, incremental, and positive incremental AUC while 1-deoxysphingosine (1-deoxySO) was correlated only with 1-hour, 2-hour glucose levels and tAUC of OGTT. The C18SAdiene was negatively correlated with all-time points glucose values and AUCs followed by negative correlation of C18SO, C16SO and C17SO with 2-hour glucose and tAUC of OGTT. The ratios of 1-deoxySA and 1-deoxySO with respect to C18SAdiene have shown significant correlation with 2-hour and AUCs. These ratios were higher in subjects with gestational diabetes in comparison with normal subjects. These findings underlined that 1-deoxysphingolipids (1-deoxySLs) and their ratios with C18SAdiene could be significantly correlated with the glucose load of OGTT and might be used as predictive biomarkers along with OGTT for the risk assessment of diabetes. PMID:28694753

Mixed Beam Murine Harderian Gland Tumorigenesis: Predicted Dose-Effect Relationships if neither Synergism nor Antagonism Occurs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siranart, Nopphon; Blakely, Eleanor A.; Cheng, Alden

Complex mixed radiation fields exist in interplanetary space, and not much is known about their latent effects on space travelers. In silico synergy analysis default predictions are useful when planning relevant mixed-ion-beam experiments and interpreting their results. These predictions are based on individual dose-effect relationships (IDER) for each component of the mixed-ion beam, assuming no synergy or antagonism. For example, a default hypothesis of simple effect additivity has often been used throughout the study of biology. However, for more than a century pharmacologists interested in mixtures of therapeutic drugs have analyzed conceptual, mathematical and practical questions similar to those thatmore » arise when analyzing mixed radiation fields, and have shown that simple effect additivity often gives unreasonable predictions when the IDER are curvilinear. Various alternatives to simple effect additivity proposed in radiobiology, pharmacometrics, toxicology and other fields are also known to have important limitations. In this work, we analyze upcoming murine Harderian gland (HG) tumor prevalence mixed-beam experiments, using customized open-source software and published IDER from past single-ion experiments. The upcoming experiments will use acute irradiation and the mixed beam will include components of high atomic number and energy (HZE). We introduce a new alternative to simple effect additivity, "incremental effect additivity", which is more suitable for the HG analysis and perhaps for other end points. We use incremental effect additivity to calculate default predictions for mixture dose-effect relationships, including 95% confidence intervals. We have drawn three main conclusions from this work. 1. It is important to supplement mixed-beam experiments with single-ion experiments, with matching end point(s), shielding and dose timing. 2. For HG tumorigenesis due to a mixed beam, simple effect additivity and incremental effect additivity sometimes give default predictions that are numerically close. However, if nontargeted effects are important and the mixed beam includes a number of different HZE components, simple effect additivity becomes unusable and another method is needed such as incremental effect additivity. 3. Eventually, synergy analysis default predictions of the effects of mixed radiation fields will be replaced by more mechanistic, biophysically-based predictions. However, optimizing synergy analyses is an important first step. If mixed-beam experiments indicate little synergy or antagonism, plans by NASA for further experiments and possible missions beyond low earth orbit will be substantially simplified.« less

Long-term relationships between molybdenum and sulfur concentrations in red cedar tree rings. [Juniperus virginana L

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guyette, R.P.; Cutter, B.E.; Henderson, G.S.

Molybdenum and S concentrations were determined in growth increments of 13 eastern redcedar (Juniperus virginana L.) trees from the Ozark region of Missouri. Chonologies were constructed, which dated from 1280 to 1960 for Mo, and from 1580 to 1960 for S.A 45% increase in Mo concentrations occurred between 1720 and 1860 when compared with the previous 440 yr. A decline in heartwood Mo concentration, beginning in 1860, is hypothesized to be due to increasing soil sulfate from the atmospheric deposition of S compounds. There was a 65% reduction in Mo concentration concomitant with a 44% increase in S concentrations inmore » redcedar heartwood formed after 1860. Sulfur and Mo concentrations were found to be negatively correlated in serial heartwood increments. Competition between sulfate and molybdate ions in soil solutions are thought to have decreased Mo in recent heartwood growth increments.« less

Thermal elastoplastic structural analysis of non-metallic thermal protection systems

NASA Technical Reports Server (NTRS)

Chung, T. J.; Yagawa, G.

1972-01-01

An incremental theory and numerical procedure to analyze a three-dimensional thermoelastoplastic structure subjected to high temperature, surface heat flux, and volume heat supply as well as mechanical loadings are presented. Heat conduction equations and equilibrium equations are derived by assuming a specific form of incremental free energy, entropy, stresses and heat flux together with the first and second laws of thermodynamics, von Mises yield criteria and Prandtl-Reuss flow rule. The finite element discretization using the linear isotropic three-dimensional element for the space domain and a difference operator corresponding to a linear variation of temperature within a small time increment for the time domain lead to systematic solutions of temperature distribution and displacement and stress fields. Various boundary conditions such as insulated surfaces and convection through uninsulated surface can be easily treated. To demonstrate effectiveness of the present formulation a number of example problems are presented.

2D discontinuous piecewise linear map: Emergence of fashion cycles.

PubMed

Gardini, L; Sushko, I; Matsuyama, K

2018-05-01

We consider a discrete-time version of the continuous-time fashion cycle model introduced in Matsuyama, 1992. Its dynamics are defined by a 2D discontinuous piecewise linear map depending on three parameters. In the parameter space of the map periodicity, regions associated with attracting cycles of different periods are organized in the period adding and period incrementing bifurcation structures. The boundaries of all the periodicity regions related to border collision bifurcations are obtained analytically in explicit form. We show the existence of several partially overlapping period incrementing structures, that is, a novelty for the considered class of maps. Moreover, we show that if the time-delay in the discrete time formulation of the model shrinks to zero, the number of period incrementing structures tends to infinity and the dynamics of the discrete time fashion cycle model converges to those of continuous-time fashion cycle model.

Incremental benefit of three-dimensional transesophageal echocardiography in the assessment of a primary pericardial hemangioma.

PubMed

Arisha, Mohammed J; Hsiung, Ming C; Nanda, Navin C; ElKaryoni, Ahmed; Mohamed, Ahmed H; Wei, Jeng

2017-08-01

Hemangiomas are rarely found in the heart and pericardial involvement is even more rare. We report a case of primary pericardial hemangioma, in which three-dimensional transesophageal echocardiography (3DTEE) provided incremental benefit over standard two-dimensional images. Our case also highlights the importance of systematic cropping of the 3D datasets in making a diagnosis of pericardial hemangioma with a greater degree of certainty. In addition, we also provide a literature review of the features of cardiac/pericardial hemangiomas in a tabular form. © 2017, Wiley Periodicals, Inc.

Validation of daily increments and a marine-entry check in the otoliths of sockeye salmon Oncorhynchus nerka post-smolts.

PubMed

Freshwater, C; Trudel, M; Beacham, T D; Neville, C-E; Tucker, S; Juanes, F

2015-07-01

Juvenile sockeye salmon Oncorhynchus nerka that were reared and smolted in laboratory conditions were found to produce otolith daily increments, as well as a consistently visible marine-entry check formed during their transition to salt water. Field-collected O. nerka post-smolts of an equivalent age also displayed visible checks; however, microchemistry estimates of marine-entry date using Sr:Ca ratios differed from visual estimates by c. 9 days suggesting that microstructural and microchemical processes occur on different time scales. © 2015 The Fisheries Society of the British Isles.

Propagation of the Hawaiian-Emperor volcano chain by Pacific plate cooling stress

USGS Publications Warehouse

Stuart, W.D.; Foulger, G.R.; Barall, M.

2007-01-01

The lithosphere crack model, the main alternative to the mantle plume model for age-progressive magma emplacement along the Hawaiian-Emperor volcano chain, requires the maximum horizontal tensile stress to be normal to the volcano chain. However, published stress fields calculated from Pacific lithosphere tractions and body forces (e.g., subduction pull, basal drag, lithosphere density) are not optimal for southeast propagation of a stress-free, vertical tensile crack coincident with the Hawaiian segment of the Hawaiian-Emperor chain. Here we calculate the thermoelastic stress rate for present-day cooling of the Pacific plate using a spherical shell finite element representation of the plate geometry. We use observed seafloor isochrons and a standard model for lithosphere cooling to specify the time dependence of vertical temperature profiles. The calculated stress rate multiplied by a time increment (e.g., 1 m.y.) then gives a thermoelastic stress increment for the evolving Pacific plate. Near the Hawaiian chain position, the calculated stress increment in the lower part of the shell is tensional, with maximum tension normal to the chain direction. Near the projection of the chain trend to the southeast beyond Hawaii, the stress increment is compressive. This incremental stress field has the form necessary to maintain and propagate a tensile crack or similar lithosphere flaw and is thus consistent with the crack model for the Hawaiian volcano chain.?? 2007 The Geological Society of America.

Sociobehavioral Factors Associated with Caries Increment: A Longitudinal Study from 24 to 36 Months Old Children in Thailand

PubMed Central

Peltzer, Karl; Mongkolchati, Aroonsri; Satchaiyan, Gamon; Rajchagool, Sunsanee; Pimpak, Taksin

2014-01-01

The aim of this study is to investigate sociobehavioral risk factors from the prenatal period until 36 months of age, and the caries increment from 24 to 36 months of the child in Thailand. The data utilized in this study come from the prospective cohort study of Thai children (PCTC) from prenatal to 36 months of the child in Mueang Nan district, Northern Thailand. The total sample size recruited was 783 infants. The sample size with dental caries data was 603 and 597, at 24 months and at 36 months, respectively. The sample size of having two assessment points with a dental examination (at 24 months and at 36 months) was 597. Results indicate that the caries increment was 52.9%, meaning from 365 caries free children at 24 months 193 had developed dental caries at 36 months. The prevalence of dental caries was 34.2% at 24 months (n = 206) and 68.5% at 36 months of age (n = 409). In bivariate analysis, higher education of the mother, lower household income, bottle feeding of the infant, frequent sweet candy consumptions, and using rain or well water as drinking water were associated with dental caries increment, while in multivariate conditional logistic regression analysis lower household income, higher education of the mother, and using rain or well water as drinking water remained associated with dental caries increment. In conclusion, a very significant increase in caries development was observed, and oral health may be influenced by sociobehavioural risk factors. PMID:25329535

Sensitivity to gaze-contingent contrast increments in naturalistic movies: An exploratory report and model comparison

PubMed Central

Wallis, Thomas S. A.; Dorr, Michael; Bex, Peter J.

2015-01-01

Sensitivity to luminance contrast is a prerequisite for all but the simplest visual systems. To examine contrast increment detection performance in a way that approximates the natural environmental input of the human visual system, we presented contrast increments gaze-contingently within naturalistic video freely viewed by observers. A band-limited contrast increment was applied to a local region of the video relative to the observer's current gaze point, and the observer made a forced-choice response to the location of the target (≈25,000 trials across five observers). We present exploratory analyses showing that performance improved as a function of the magnitude of the increment and depended on the direction of eye movements relative to the target location, the timing of eye movements relative to target presentation, and the spatiotemporal image structure at the target location. Contrast discrimination performance can be modeled by assuming that the underlying contrast response is an accelerating nonlinearity (arising from a nonlinear transducer or gain control). We implemented one such model and examined the posterior over model parameters, estimated using Markov-chain Monte Carlo methods. The parameters were poorly constrained by our data; parameters constrained using strong priors taken from previous research showed poor cross-validated prediction performance. Atheoretical logistic regression models were better constrained and provided similar prediction performance to the nonlinear transducer model. Finally, we explored the properties of an extended logistic regression that incorporates both eye movement and image content features. Models of contrast transduction may be better constrained by incorporating data from both artificial and natural contrast perception settings. PMID:26057546

DAM_Explorer: A Modeling Framework for Assessing the Physical Response of Streams to Dam Removal

DTIC Science & Technology

2009-06-01

ERDC TN-EMRRP-SR-65 1 DAM_Explorer: A Modeling Framework for Assessing the Physical Response of Streams to Dam Removal By Jock Conyngham1 and...physical and temporal increments for staged removals) is anticipated. POINTS OF CONTACT For additional information contact Jock N. Conyngham (406-541

Constant field gradient planar coupled cavity structure

DOEpatents

Kang, Y.W.; Kustom, R.L.

1999-07-27

A cavity structure is disclosed having at least two opposing planar housing members spaced apart to accommodate the passage of a particle beam through the structure between the members. Each of the housing members have a plurality of serially aligned hollows defined therein, and also passages, formed in the members, which interconnect serially adjacent hollows to provide communication between the hollows. The opposing planar housing members are spaced and aligned such that the hollows in one member cooperate with corresponding hollows in the other member to form a plurality of resonant cavities aligned along the particle beam within the cavity structure. To facilitate the obtaining of a constant field gradient within the cavity structure, the passages are configured so as to be incrementally narrower in the direction of travel of the particle beam. In addition, the spacing distance between the opposing housing members is configured to be incrementally smaller in the direction of travel of the beam. 16 figs.

Constant field gradient planar coupled cavity structure

DOEpatents

Kang, Yoon W.; Kustom, Robert L.

1999-01-01

A cavity structure having at least two opposing planar housing members spaced apart to accommodate the passage of a particle beam through the structure between the members. Each of the housing members have a plurality of serially aligned hollows defined therein, and also passages, formed in the members, which interconnect serially adjacent hollows to provide communication between the hollows. The opposing planar housing members are spaced and aligned such that the hollows in one member cooperate with corresponding hollows in the other member to form a plurality of resonant cavities aligned along the particle beam within the cavity structure. To facilitate the obtaining of a constant field gradient within the cavity structure, the passages are configured so as to be incrementally narrower in the direction of travel of the particle beam. In addition, the spacing distance between the opposing housing members is configured to be incrementally smaller in the direction of travel of the beam.

A financial market model with two discontinuities: Bifurcation structures in the chaotic domain

NASA Astrophysics Data System (ADS)

Panchuk, Anastasiia; Sushko, Iryna; Westerhoff, Frank

2018-05-01

We continue the investigation of a one-dimensional piecewise linear map with two discontinuity points. Such a map may arise from a simple asset-pricing model with heterogeneous speculators, which can help us to explain the intricate bull and bear behavior of financial markets. Our focus is on bifurcation structures observed in the chaotic domain of the map's parameter space, which is associated with robust multiband chaotic attractors. Such structures, related to the map with two discontinuities, have been not studied before. We show that besides the standard bandcount adding and bandcount incrementing bifurcation structures, associated with two partitions, there exist peculiar bandcount adding and bandcount incrementing structures involving all three partitions. Moreover, the map's three partitions may generate intriguing bistability phenomena.

Simulated Service and Stress Corrosion Cracking Testing for Friction Stir Welded Spun Formed Domes

NASA Technical Reports Server (NTRS)

Stewart, Thomas J.; Torres, Pablo D.; Caratus, Andrei A.; Curreri, Peter A.

2010-01-01

Simulated service testing (SST) development was required to help qualify a new 2195 aluminum lithium (Al-Li) alloy spin forming dome fabrication process for the National Aeronautics and Space Administration (NASA) Exploration Development Technology Program. The application for the technology is to produce high strength low weight tank components for NASA s next generation launch vehicles. Since plate material is not currently manufactured large enough to fabricate these domes, two plates are joined by means of friction stir welding. The plates are then pre-contour machined to near final thicknesses allowing for a thicker weld land and anticipating the level of stretch induced by the spin forming process. The welded plates are then placed in a spin forming tool and hot stretched using a trace method producing incremental contours. Finally the dome receives a room temperature contour stretch to final dimensions, heat treatment, quenching, and artificial aging to emulate a T-8 condition of temper. Stress corrosion cracking (SCC) tests were also performed by alternate immersion in a sodium chloride (NaCl) solution using the typical double beam assembly and with 4-point loaded specimens and use of bent-beam stress-corrosion test specimens under alternate immersion conditions. In addition, experiments were conducted to determine the threshold stress intensity factor for SCC (K(sub ISCC)) which to our knowledge has not been determined previously for Al-Li 2195 alloy. The successful simulated service and stress corrosion testing helped to provide confidence to continue to Ares 1 scale dome fabrication

Investigation on laser forming of stainless steel sheets under coupling mechanism

NASA Astrophysics Data System (ADS)

Chakraborty, Shitanshu S.; Maji, Kuntal; Racherla, Vikranth; Nath, Ashish K.

2015-08-01

In laser forming of three dimensional surfaces simultaneous bending and thickening of the sheet being formed are often required. Laser forming by the coupling mechanism has the capability to generate both of them. However, literature is scarce on the study of laser forming under coupling mechanism. A part of this work investigates the effect of Fourier number and laser spot diameter on bending angle and thickness increment induced by laser scans promoting coupling mechanism. Peak surface temperature was maintained nearly constant. It was chosen so as to avoid surface melting and sensitization at the scan track on top surface. The required laser parameters were determined with the help of an analytical model for temperature estimation. The experimental results showed that while the bending angle reduced with the increase of Fourier number, the thickness increment increased. And, with the increase of laser spot diameter both bending angle and thickness increased. Finite element simulations were carried out using ABAQUS software on a three dimensional model for developing a better understanding of the deformation behaviour. Multimode intensity distribution of the laser beam and temperature dependant material properties were considered in the simulations. Finite element analysis and microstructure study showed that chances of sensitization are rare with the current laser parameter combinations. Based on temperature gradient and coupling mechanisms a different laser scanning strategy has been proposed for laser forming of deep pillow shaped surfaces retaining symmetry.

Exploiting Outage and Error Probability of Cooperative Incremental Relaying in Underwater Wireless Sensor Networks

PubMed Central

Nasir, Hina; Javaid, Nadeem; Sher, Muhammad; Qasim, Umar; Khan, Zahoor Ali; Alrajeh, Nabil; Niaz, Iftikhar Azim

2016-01-01

This paper embeds a bi-fold contribution for Underwater Wireless Sensor Networks (UWSNs); performance analysis of incremental relaying in terms of outage and error probability, and based on the analysis proposition of two new cooperative routing protocols. Subject to the first contribution, a three step procedure is carried out; a system model is presented, the number of available relays are determined, and based on cooperative incremental retransmission methodology, closed-form expressions for outage and error probability are derived. Subject to the second contribution, Adaptive Cooperation in Energy (ACE) efficient depth based routing and Enhanced-ACE (E-ACE) are presented. In the proposed model, feedback mechanism indicates success or failure of data transmission. If direct transmission is successful, there is no need for relaying by cooperative relay nodes. In case of failure, all the available relays retransmit the data one by one till the desired signal quality is achieved at destination. Simulation results show that the ACE and E-ACE significantly improves network performance, i.e., throughput, when compared with other incremental relaying protocols like Cooperative Automatic Repeat reQuest (CARQ). E-ACE and ACE achieve 69% and 63% more throughput respectively as compared to CARQ in hard underwater environment. PMID:27420061

The molecular refractive function of lens γ-crystallins

PubMed Central

Zhao, Huaying; Brown, Patrick H.; Magone, M. Teresa; Schuck, Peter

2011-01-01

γ-crystallins constitute the major protein component in the nucleus of the vertebrate eye lens. Present at very high concentrations, they exhibit extreme solubility and thermodynamic stability to prevent scattering of light and the formation of cataracts. However, functions beyond this structural role have remained mostly unclear. Here, we calculate molecular refractive index increments of crystallins. We show that all lens γ-crystallins have evolved a significantly elevated molecular refractive index increment, which is far above those of most proteins, including non-lens members of the βγ-crystallin family from different species. The same trait has evolved in parallel in crystallins of different phyla, including in the S-crystallins of cephalopods. A high refractive index increment can lower the crystallin concentration required to achieve a suitable refractive power of the lens, and thereby reduce their propensity to aggregate and form cataract. To produce a significant increase of the refractive index increment, a substantial global shift in the amino acid composition is required, which can naturally explain the highly unusual amino acid composition of γ-crystallins and their functional homologues. This function provides a new perspective for interpreting their molecular structure. PMID:21684289

The molecular refractive function of lens γ-Crystallins.

PubMed

Zhao, Huaying; Brown, Patrick H; Magone, M Teresa; Schuck, Peter

2011-08-19

γ-Crystallins constitute the major protein component in the nucleus of the vertebrate eye lens. Present at very high concentrations, they exhibit extreme solubility and thermodynamic stability to prevent scattering of light and formation of cataracts. However, functions beyond this structural role have remained mostly unclear. Here, we calculate molecular refractive index increments of crystallins. We show that all lens γ-crystallins have evolved a significantly elevated molecular refractive index increment, which is far above those of most proteins, including nonlens members of the βγ-crystallin family from different species. The same trait has evolved in parallel in crystallins of different phyla, including S-crystallins of cephalopods. A high refractive index increment can lower the crystallin concentration required to achieve a suitable refractive power of the lens and thereby reduce their propensity to aggregate and form cataracts. To produce a significant increase in the refractive index increment, a substantial global shift in amino acid composition is required, which can naturally explain the highly unusual amino acid composition of γ-crystallins and their functional homologues. This function provides a new perspective for interpreting their molecular structure. Copyright © 2011. Published by Elsevier Ltd.

Incremental triangulation by way of edge swapping and local optimization

NASA Technical Reports Server (NTRS)

Wiltberger, N. Lyn

1994-01-01

This document is intended to serve as an installation, usage, and basic theory guide for the two dimensional triangulation software 'HARLEY' written for the Silicon Graphics IRIS workstation. This code consists of an incremental triangulation algorithm based on point insertion and local edge swapping. Using this basic strategy, several types of triangulations can be produced depending on user selected options. For example, local edge swapping criteria can be chosen which minimizes the maximum interior angle (a MinMax triangulation) or which maximizes the minimum interior angle (a MaxMin or Delaunay triangulation). It should be noted that the MinMax triangulation is generally only locally optical (not globally optimal) in this measure. The MaxMin triangulation, however, is both locally and globally optical. In addition, Steiner triangulations can be constructed by inserting new sites at triangle circumcenters followed by edge swapping based on the MaxMin criteria. Incremental insertion of sites also provides flexibility in choosing cell refinement criteria. A dynamic heap structure has been implemented in the code so that once a refinement measure is specified (i.e., maximum aspect ratio or some measure of a solution gradient for the solution adaptive grid generation) the cell with the largest value of this measure is continually removed from the top of the heap and refined. The heap refinement strategy allows the user to specify either the number of cells desired or refine the mesh until all cell refinement measures satisfy a user specified tolerance level. Since the dynamic heap structure is constantly updated, the algorithm always refines the particular cell in the mesh with the largest refinement criteria value. The code allows the user to: triangulate a cloud of prespecified points (sites), triangulate a set of prespecified interior points constrained by prespecified boundary curve(s), Steiner triangulate the interior/exterior of prespecified boundary curve(s), refine existing triangulations based on solution error measures, and partition meshes based on the Cuthill-McKee, spectral, and coordinate bisection strategies.

Architectural setup for online monitoring and control of process parameters in robot-based ISF

NASA Astrophysics Data System (ADS)

Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2017-10-01

This article describes new developments in an incremental, robot-based sheet metal forming process (Roboforming) for the production of sheet metal components for small lot sizes and prototypes. The dieless kinematic-based generation of the shape is implemented by means of two industrial robots, which are interconnected to a cooperating robot system. Compared to other incremental sheet forming (ISF) machines, this system offers high geometrical design flexibility without the need of any part-dependent tools. However, the industrial application of ISF is still limited by certain constraints, e.g. the low geometrical accuracy. Responding to these constraints, the authors introduce a new architectural setup extending the current one by a superordinate process control. This sophisticated control consists of two modules, i.e. the compensation of the two industrial robots' low structural stiffness as well as a combined force/torque control. It is assumed that this contribution will lead to future research and development projects in which the authors will thoroughly investigate ISF process parameters influencing the geometric accuracy of the forming results.

Simulation and experimental design of a new advanced variable step size Incremental Conductance MPPT algorithm for PV systems.

PubMed

Loukriz, Abdelhamid; Haddadi, Mourad; Messalti, Sabir

2016-05-01

Improvement of the efficiency of photovoltaic system based on new maximum power point tracking (MPPT) algorithms is the most promising solution due to its low cost and its easy implementation without equipment updating. Many MPPT methods with fixed step size have been developed. However, when atmospheric conditions change rapidly , the performance of conventional algorithms is reduced. In this paper, a new variable step size Incremental Conductance IC MPPT algorithm has been proposed. Modeling and simulation of different operational conditions of conventional Incremental Conductance IC and proposed methods are presented. The proposed method was developed and tested successfully on a photovoltaic system based on Flyback converter and control circuit using dsPIC30F4011. Both, simulation and experimental design are provided in several aspects. A comparative study between the proposed variable step size and fixed step size IC MPPT method under similar operating conditions is presented. The obtained results demonstrate the efficiency of the proposed MPPT algorithm in terms of speed in MPP tracking and accuracy. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Real-time blind deconvolution of retinal images in adaptive optics scanning laser ophthalmoscopy

NASA Astrophysics Data System (ADS)

Li, Hao; Lu, Jing; Shi, Guohua; Zhang, Yudong

2011-06-01

With the use of adaptive optics (AO), the ocular aberrations can be compensated to get high-resolution image of living human retina. However, the wavefront correction is not perfect due to the wavefront measure error and hardware restrictions. Thus, it is necessary to use a deconvolution algorithm to recover the retinal images. In this paper, a blind deconvolution technique called Incremental Wiener filter is used to restore the adaptive optics confocal scanning laser ophthalmoscope (AOSLO) images. The point-spread function (PSF) measured by wavefront sensor is only used as an initial value of our algorithm. We also realize the Incremental Wiener filter on graphics processing unit (GPU) in real-time. When the image size is 512 × 480 pixels, six iterations of our algorithm only spend about 10 ms. Retinal blood vessels as well as cells in retinal images are restored by our algorithm, and the PSFs are also revised. Retinal images with and without adaptive optics are both restored. The results show that Incremental Wiener filter reduces the noises and improve the image quality.

On Landauer's Principle and Bound for Infinite Systems

NASA Astrophysics Data System (ADS)

Longo, Roberto

2018-04-01

Landauer's principle provides a link between Shannon's information entropy and Clausius' thermodynamical entropy. Here we set up a basic formula for the incremental free energy of a quantum channel, possibly relative to infinite systems, naturally arising by an Operator Algebraic point of view. By the Tomita-Takesaki modular theory, we can indeed describe a canonical evolution associated with a quantum channel state transfer. Such evolution is implemented both by a modular Hamiltonian and a physical Hamiltonian, the latter being determined by its functoriality properties. This allows us to make an intrinsic analysis, extending our QFT index formula, but without any a priori given dynamics; the associated incremental free energy is related to the logarithm of the Jones index and is thus quantised. This leads to a general lower bound for the incremental free energy of an irreversible quantum channel which is half of the Landauer bound, and to further bounds corresponding to the discrete series of the Jones index. In the finite dimensional context, or in the case of DHR charges in QFT, where the dimension is a positive integer, our lower bound agrees with Landauer's bound.

One-year temporal stability and predictive and incremental validity of the body, eating, and exercise comparison orientation measure (BEECOM) among college women.

PubMed

Fitzsimmons-Craft, Ellen E; Bardone-Cone, Anna M

2014-01-01

This study examined the one-year temporal stability and the predictive and incremental validity of the Body, Eating, and Exercise Comparison Measure (BEECOM) in a sample of 237 college women who completed study measures at two time points about one year apart. One-year temporal stability was high for the BEECOM total and subscale (i.e., Body, Eating, and Exercise Comparison Orientation) scores. Additionally, the BEECOM exhibited predictive validity in that it accounted for variance in body dissatisfaction and eating disorder symptomatology one year later. These findings held even after controlling for body mass index and existing measures of social comparison orientation. However, results regarding the incremental validity of the BEECOM, or its ability to predict change in these constructs over time, were more mixed. Overall, this study demonstrated additional psychometric properties of the BEECOM among college women, further establishing the usefulness of this measure for more comprehensively assessing eating disorder-related social comparison. Copyright © 2013 Elsevier Ltd. All rights reserved.

Dual tuning in creative processes: Joint contributions of intrinsic and extrinsic motivational orientations.

PubMed

Gong, Yaping; Wu, Junfeng; Song, Lynda Jiwen; Zhang, Zhen

2017-05-01

Intrinsic and extrinsic motivational orientations often coexist and can serve important functions. We develop and test a model in which intrinsic and extrinsic motivational orientations interact positively to influence personal creativity goal. Personal creativity goal, in turn, has a positive relationship with incremental creativity and an inverted U-shaped relationship with radical creativity. In a pilot study, we validated the personal creativity goal measure using 180 (Sample 1) and 69 (Sample 2) employees from a consulting firm. In the primary study, we tested the overall model using a sample of 657 research and development employees and their direct supervisors from an automobile firm. The results support the hypothesized model and yield several new insights. Intrinsic and extrinsic motivational orientations synergize with each other to strengthen personal creativity goal. Personal creativity goal in turn benefits incremental and radical creativity, but only up to a certain point for the latter. In addition to its linear indirect relationship with incremental creativity, intrinsic motivational orientation has an inverted U-shaped indirect relationship with radical creativity via personal creativity goal. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

When Children Learn Programming: Antecedents, Concepts and Outcomes.

ERIC Educational Resources Information Center

Shneiderman, Ben

1985-01-01

Discusses components of an educational plan which supports acquisition of computer programing skills by elementary school children, including antecedent knowledge required (sequencing, similarity, character recognition, part/whole relationships, conditional forms, repetition, and incrementation); initial programing concepts; and outcomes valuable…

Adults with initial metabolic syndrome have altered muscle deoxygenation during incremental exercise.

PubMed

Machado, Alessandro da Costa; Barbosa, Thales Coelho; Kluser Sales, Allan Robson; de Souza, Marcio Nogueira; da Nóbrega, Antonio Claudio Lucas; Silva, Bruno Moreira

2017-02-01

Reduced aerobic power is independently associated with metabolic syndrome (MetS) incidence and prevalence in adults. This study investigated whether muscle deoxygenation (proxy of microvascular O 2 extraction) during incremental exercise is altered in MetS and associated with reduced oxygen consumption ( V˙O 2peak ). Twelve men with initial MetS (no overt diseases and medication-naive; mean ± SD, age 38 ± 7 years) and 12 healthy controls (HCs) (34 ± 7 years) completed an incremental cycling test to exhaustion, in which pulmonary ventilation and gas exchange (metabolic analyzer), as well as vastus lateralis deoxygenation (near infrared spectroscopy), were measured. Subjects with MetS, in contrast to HCs, showed lower V˙O 2peak normalized to total lean mass, similar V˙O 2 response to exercise, and earlier break point (BP) in muscle deoxygenation. Consequently, deoxygenation slope from BP to peak exercise was greater. Furthermore, absolute V˙O 2peak was positively associated with BP in correlations adjusted for total lean mass. MetS, without overt diseases, altered kinetics of muscle deoxygenation during incremental exercise, particularly at high-intensity exercise. Therefore, the balance between utilization and delivery of O 2 within skeletal muscle is impaired early in MetS natural history, which may contribute to the reduction in aerobic power. © 2017 The Obesity Society.

Label consistent K-SVD: learning a discriminative dictionary for recognition.

PubMed

Jiang, Zhuolin; Lin, Zhe; Davis, Larry S

2013-11-01

A label consistent K-SVD (LC-KSVD) algorithm to learn a discriminative dictionary for sparse coding is presented. In addition to using class labels of training data, we also associate label information with each dictionary item (columns of the dictionary matrix) to enforce discriminability in sparse codes during the dictionary learning process. More specifically, we introduce a new label consistency constraint called "discriminative sparse-code error" and combine it with the reconstruction error and the classification error to form a unified objective function. The optimal solution is efficiently obtained using the K-SVD algorithm. Our algorithm learns a single overcomplete dictionary and an optimal linear classifier jointly. The incremental dictionary learning algorithm is presented for the situation of limited memory resources. It yields dictionaries so that feature points with the same class labels have similar sparse codes. Experimental results demonstrate that our algorithm outperforms many recently proposed sparse-coding techniques for face, action, scene, and object category recognition under the same learning conditions.

The specificity of parenting effects: Differential relations of parent praise and criticism to children's theories of intelligence and learning goals.

PubMed

Gunderson, Elizabeth A; Donnellan, M Brent; Robins, Richard W; Trzesniewski, Kali H

2018-04-24

Individuals who believe that intelligence can be improved with effort (an incremental theory of intelligence) and who approach challenges with the goal of improving their understanding (a learning goal) tend to have higher academic achievement. Furthermore, parent praise is associated with children's incremental theories and learning goals. However, the influences of parental criticism, as well as different forms of praise and criticism (e.g., process vs. person), have received less attention. We examine these associations by analyzing two existing datasets (Study 1: N = 317 first to eighth graders; Study 2: N = 282 fifth and eighth graders). In both studies, older children held more incremental theories of intelligence, but lower learning goals, than younger children. Unexpectedly, the relation between theories of intelligence and learning goals was nonsignificant and did not vary with children's grade level. In both studies, overall perceived parent praise positively related to children's learning goals, whereas perceived parent criticism negatively related to incremental theories of intelligence. In Study 2, perceived parent process praise was the only significant (positive) predictor of children's learning goals, whereas perceived parent person criticism was the only significant (negative) predictor of incremental theories of intelligence. Finally, Study 2 provided some support for our hypothesis that age-related differences in perceived parent praise and criticism can explain age-related differences in children's learning goals. Results suggest that incremental theories of intelligence and learning goals might not be strongly related during childhood and that perceived parent praise and criticism have important, but distinct, relations with each motivational construct. Copyright © 2018 Elsevier Inc. All rights reserved.

Stream Kriging: Incremental and recursive ordinary Kriging over spatiotemporal data streams

NASA Astrophysics Data System (ADS)

Zhong, Xu; Kealy, Allison; Duckham, Matt

2016-05-01

Ordinary Kriging is widely used for geospatial interpolation and estimation. Due to the O (n3) time complexity of solving the system of linear equations, ordinary Kriging for a large set of source points is computationally intensive. Conducting real-time Kriging interpolation over continuously varying spatiotemporal data streams can therefore be especially challenging. This paper develops and tests two new strategies for improving the performance of an ordinary Kriging interpolator adapted to a stream-processing environment. These strategies rely on the expectation that, over time, source data points will frequently refer to the same spatial locations (for example, where static sensor nodes are generating repeated observations of a dynamic field). First, an incremental strategy improves efficiency in cases where a relatively small proportion of previously processed spatial locations are absent from the source points at any given iteration. Second, a recursive strategy improves efficiency in cases where there is substantial set overlap between the sets of spatial locations of source points at the current and previous iterations. These two strategies are evaluated in terms of their computational efficiency in comparison to ordinary Kriging algorithm. The results show that these two strategies can reduce the time taken to perform the interpolation by up to 90%, and approach average-case time complexity of O (n2) when most but not all source points refer to the same locations over time. By combining the approaches developed in this paper with existing heuristic ordinary Kriging algorithms, the conclusions indicate how further efficiency gains could potentially be accrued. The work ultimately contributes to the development of online ordinary Kriging interpolation algorithms, capable of real-time spatial interpolation with large streaming data sets.

Flexible processing and the design of grammar.

PubMed

Sag, Ivan A; Wasow, Thomas

2015-02-01

We explore the consequences of letting the incremental and integrative nature of language processing inform the design of competence grammar. What emerges is a view of grammar as a system of local monotonic constraints that provide a direct characterization of the signs (the form-meaning correspondences) of a given language. This "sign-based" conception of grammar has provided precise solutions to the key problems long thought to motivate movement-based analyses, has supported three decades of computational research developing large-scale grammar implementations, and is now beginning to play a role in computational psycholinguistics research that explores the use of underspecification in the incremental computation of partial meanings.

The effective compliance of spatially evolving planar wing-cracks

NASA Astrophysics Data System (ADS)

Ayyagari, R. S.; Daphalapurkar, N. P.; Ramesh, K. T.

2018-02-01

We present an analytic closed form solution for anisotropic change in compliance due to the spatial evolution of planar wing-cracks in a material subjected to largely compressive loading. A fully three-dimensional anisotropic compliance tensor is defined and evaluated considering the wing-crack mechanism, using a mixed-approach based on kinematic and energetic arguments to derive the coefficients in incremental compliance. Material, kinematic and kinetic parametric influences on the increments in compliance are studied in order to understand their physical implications on material failure. Model verification is carried out through comparisons to experimental uniaxial compression results to showcase the predictive capabilities of the current study.

Multiphase materials with lignin: 5. Effect of lignin atructure on hydroxypropyl cellulose blend morphology

Treesearch

Timothy G. Rials; Wolfgang G. Glasser

1990-01-01

The incremental elimination of hydroxy functionality in an organosolv lignin by ethylation or acetylation dramatically influenced the state of miscibility and resulting morphology of blends prepared with hydroxypropyl cellulose (HPC). A maximum level of interation between the blend components, as determined from melting point depression, occurred where 23-40% of the...

Sleep quality and duration are associated with performance in maximal incremental test.

PubMed

Antunes, B M; Campos, E Z; Parmezzani, S S; Santos, R V; Franchini, E; Lira, F S

2017-08-01

Inadequate sleep patterns may be considered a trigger to development of several metabolic diseases. Additionally, sleep deprivation and poor sleep quality can negatively impact performance in exercise training. However, the impact of sleep duration and sleep quality on performance during incremental maximal test performed by healthy men is unclear. Therefore, the purpose of the study was to analyze the association between sleep pattern (duration and quality) and performance during maximal incremental test in healthy male individuals. A total of 28 healthy males volunteered to take part in the study. Sleep quality, sleep duration and physical activity were subjectively assessed by questionnaires. Sleep pattern was classified by sleep duration (>7h or <7h of sleep per night) and sleep quality according to the sum of measured points and/or scores by the Pittsburgh Sleep Quality Index (PSQI). Incremental exercise test was performed at 35 watts for untrained subjects, 70 watts for physically active subjects and 105 watts for well-trained subjects. HR max was correlated with sleep quality (r=0.411, p=0.030) and sleep duration (r=-0.430, p=0.022). Participants reporting good sleep quality presented higher values of W max , VO 2max and lower values of HR max when compared to participants with altered sleep. Regarding sleep duration, only W max was influenced by the amount of sleeping hours per night and this association remained significant even after adjustment by VO 2max . Sleep duration and quality are associated, at least in part, with performance during maximal incremental test among healthy men, with losses in W max and HR max . In addition, our results suggest that the relationship between sleep patterns and performance, mainly in W max , is independent of fitness condition. Copyright © 2017 Elsevier Inc. All rights reserved.

The cost-effectiveness of dapagliflozin versus sulfonylurea as an add-on to metformin in the treatment of Type 2 diabetes mellitus.

PubMed

Charokopou, M; McEwan, P; Lister, S; Callan, L; Bergenheim, K; Tolley, K; Postema, R; Townsend, R; Roudaut, M

2015-07-01

To assess the cost-effectiveness of dapagliflozin, a sodium-glucose co-transporter-2 (SGLT-2) inhibitor, compared with a sulfonylurea, when added to metformin for treatment of UK people with Type 2 diabetes mellitus inadequately controlled on metformin alone. Clinical inputs sourced from a head-to-head randomized controlled trial (RCT) informed the Cardiff diabetes decision model. Risk equations developed from the United Kingdom Prospective Diabetes Study (UKPDS) were used in conjunction with the clinical inputs to predict disease progression and the incidence of micro- and macrovascular complications over a lifetime horizon. Cost and utility data were generated to present the incremental cost-effectiveness ratio (ICER) for both treatment arms, and sensitivity and scenario analyses were conducted to assess the impact of uncertainty on the final model results. The dapagliflozin treatment arm was associated with a mean incremental benefit of 0.467 quality-adjusted life years (QALYs) [95% confidence interval (CI): 0.420; 0.665], with an incremental cost of £1246 (95% CI: £613; £1637). This resulted in an ICER point estimate of £2671 per QALY gained. Incremental costs were shown to be insensitive to parameter variation, with only treatment-related weight change having a significant impact on the incremental QALYs. Probabilistic sensitivity analysis determined that dapagliflozin had a 100% probability of being cost-effective at a willingness-to-pay threshold of £20,000 per QALY. Dapagliflozin in combination with metformin was shown to be a cost-effective treatment option compared with sulfonylurea from a UK healthcare perspective for people with Type 2 diabetes mellitus who are inadequately controlled on metformin monotherapy. © 2015 The Authors. Diabetic Medicine © 2015 Diabetes UK.

Sclerochronology of Holocene oyster shells (Crassostrea gigas) from the West Coast of Bohai Sea, China

NASA Astrophysics Data System (ADS)

Fan, C.; Koeniger, P.; Wang, H.; Frechen, M.

2009-04-01

Sclerochronology, the study of periodic increments in skeletal organisms, can decipher the life history and environmental records preserved in fossil shells. Although there have been a number of studies that apply isotopic analyses to shells in open ocean and fresh water, investigations for brackish environments are rare. One of the common inhabitants in estuaries is the Crassostrea oyster. Kirby et al. (1998) demonstrated a close correspondence between the ligamental increments of convex and concave bands and yearly ^18O cycles; Andrus and Crowe (2000) found a close correspondence between translucent growth bands on the cross-section of the hinge and yearly ^18O cycles. They conclude that the morphological features on hinge and growth bands on the cross-section are formed annually and can be used to determine accurately age and growth rate in this species. However, Surge et al. (2001) could not find that these morphologic features have seasonal significance in the C. virginica shells. Therefore, these concave ridges are not reliable independent proxies of seasonality. These studies were carried out with C. virginica shells; none was studied with nature C. gigas, which was widely distributed along the Pacific coastal area. C. gigas has been introduced from its native home to all over the world, ranging from North America to Australia and Europe; it has become an important commercial harvest in many of these places. Buried Holocene oyster shells of C. gigas were sampled from a huge buried oyster reef on the West of Bohai Sea, China. One of these shells was selected for high resolution micro-sampling and stable isotope analyses testing the assumption that C. gigas ligamental increments are annual in nature. We analyzed 236 consecutive samples from the shell to show that morphologic features both on hinge and cross-section are annual by comparing them to the ^18O profiles. We tested the assumption that the morphologic features of C.gigas are delineated by convex tops and concave bottoms on hinge and corresponding translucent growth bands on cross-section. The shell has 13.5 ligamental increments, based on 13.5 convex bands and 13 concave bottoms on hinge. Convex tops correspond to ^18O minima (summers), whereas concave bottoms correspond to ^18O maxima, which were formed during the low temperature of winter in the study area. We demonstrate that the ligamental increments of convex tops, concave bottoms and translucent growth bands in the studied C. gigas shell are suitable indicators of annual growth increments. The life spans, growth rates, and the timing of death can be determined from the ligament increments and isotope profiles of buried oyster shells.

Effects of simulated microgravity on otoliths growth and microstructure of Larval Zebrafish, Danio rerio

NASA Astrophysics Data System (ADS)

Li, Xiaoyan; Wang, Gaohong; Liu, Yongding

2012-07-01

Otolith is the vestibular endorgan that takes part in gravitational signal initiation. Environmental change can leave mark on otolith microstructure. In this study, we use zebrafish from embryo stage of 10hpf to middle larval stage of 12dpf to investigate the effect of microgravity on otolith development. It was found that otoliths size of microgravity group was larger than the control before 6dpf, but after that both groups kept nearly the same size. Surface scanning of otolith morphology with SEM showed that otolith of microgravity group were much smoother than the control. After etching with HCl, we found both groups formed daily increments, but microgravity group lack clear check marks in some special developmental stage. Widths between increments were wider, and granule shape was much sharper in microgravity group. Analysis of crystal orientation disclosed the increments of microgravity group formed irregularly. The surface etched with PKb also exhibited different granule size and orientation: the granules in the control had nearly the same size and direction, while the particles in microgravity were smaller and orientated differently along the translucent ring. The organic leftover were also found between layers in microgravity group. These results suggest that microgravity can affect otolith development, the component and structural mode of inorganic and organic parts change with different gravitation environment, which may be involved in orientation adjustment of SMS (Space Movement Sickness).

Development and usage of a false color display technique for presenting Seasat-A scatterometer data

NASA Technical Reports Server (NTRS)

Jackson, C. B.

1980-01-01

A computer generated false color program which creates digital multicolor graphics to display geophysical surface parameters measured by the Seasat-A satellite scatterometer (SASS) is described. The data is incrementally scaled over the range of acceptable values and each increment and its data points are assigned a color. The advantage of the false color display is that it visually infers cool or weak data versus hot or intense data by using the rainbow of colors. For example, with wind speeds, levels of yellow and red could be used to imply high winds while green and blue could imply calmer air. The SASS data is sorted into geographic regions and the final false color images are projected onto various world maps with superimposed land/water boundaries.

States and the politics of incrementalism: health policy in Wisconsin during the 1990s.

PubMed

Sparer, Michael S

2004-04-01

Wisconsin officials during the 1990s seemed poised to enact innovative and comprehensive health care reform. During that era, an ambitious, popular, and reform-minded governor led the state. The state had an unusually professional legislature. The state's economy was strong. Even with these advantages, however, the report card on the state's efforts is mixed. The state enacted a fairly modest set of reforms that were financed largely by the federal government and subject to extensive federal oversight. The Wisconsin story thus seems to be about the politics of incrementalism. But while critics of incrementalist politics point out that the number of uninsured continues to grow, the catalytic federalism witnessed in Wisconsin in the 1990s may well be the best model for implementing health care reform.

Incremental fold tests of remagnetized carbonate rocks

NASA Astrophysics Data System (ADS)

Van Der Voo, R.; van der Pluijm, B.

2017-12-01

Many unmetamorphosed carbonates all over the world are demonstrably remagnetized, with the age of the secondary magnetizations typically close to that of the nearest orogeny in space and time. This observation did not become compelling until the mid-1980's, when the incremental fold test revealed the Appalachian carbonates to carry a syn-deformational remanence of likely Permian age (Scotese et al., 1982, Phys. Earth Planet. Int., v. 30, p. 385-395; Cederquist et al., 2006, Tectonophysics v. 422, p. 41-54). Since that time scores of Appalachian and Rocky Mountain carbonate rocks have added results to the growing database of paleopoles representing remagnetizations. Late Paleozoic remagnetizations form a cloud of results surrounding the reference poles of the Laurentian APWP. Remagnetizations in other locales and with inferred ages coeval with regional orogenies (e.g., Taconic, Sevier/Laramide, Variscan, Indosinian) are also ubiquitous. To be able to transform this cornucopia into valuable anchor-points on the APWP would be highly desirable. This may indeed become feasible, as will be explained next. Recent studies of faulted and folded carbonate-shale sequences have shown that this deformation enhances the illitization of smectite (Haines & van der Pluijm, 2008, Jour. Struct. Geol., v. 30, p. 525-538; Fitz-Diaz et al., 2014, International Geol. Review, v. 56, p. 734-755). 39Ar-40Ar dating of the authigenic illite (neutralizing any detrital illite contribution by taking the intercept of a mixing line) yields, therefore, the age of the deformation. We know that this date is also the age of the syndeformational remanence; thus we have the age of the corresponding paleopole. Results so far are obtained for the Canadian and U.S. Rocky Mountains and for the Spanish Cantabrian carbonates (Tohver et al., 2008, Earth Planet. Sci. Lett., v. 274, p. 524-530) and make good sense in accord with geological knowledge. Incremental fold tests are the tools used for this determination, with plots of the precision parameter (k) versus percent unfolding. Analyses of these plots are carried out to detect whether there is a systematic combination of tilting (=folding) and oroclinal rotations in eastern Mexico.

Two-dimensional scanner apparatus. [flaw detector in small flat plates

NASA Technical Reports Server (NTRS)

Kurtz, G. W.; Bankston, B. F. (Inventor)

1984-01-01

An X-Y scanner utilizes an eddy current or ultrasonic current test probe to detect surface defects in small flat plates and the like. The apparatus includes a scanner which travels on a pair of slide tubes in the X-direction. The scanner, carried on a carriage which slides in the Y-direction, is driven by a helix shaft with a closed-loop helix groove in which a follower pin carried by scanner rides. The carriage is moved incrementally in the Y-direction upon the completion of travel of the scanner back and forth in the X-direction by means of an indexing actuator and an indexing gear. The actuator is in the form of a ratchet which engages ratchet gear upon return of the scanner to the indexing position. The indexing gear is rotated a predetermined increment along a crack gear to move carriage incrementally in the Y-direction. Thus, simplified highly responsive mechanical motion may be had in a small lightweight portable unit for accurate scanning of small area.

Comparing the Value of Nonprofit Hospitals' Tax Exemption to Their Community Benefits.

PubMed

Herring, Bradley; Gaskin, Darrell; Zare, Hossein; Anderson, Gerard

2018-01-01

The tax-exempt status of nonprofit hospitals has received increased attention from policymakers interested in examining the value they provide instead of paying taxes. We use 2012 data from the Internal Revenue Service (IRS) Form 990, Centers for Medicare and Medicaid Services (CMS) Hospital Cost Reports, and American Hospital Association's (AHA) Annual Survey to compare the value of community benefits with the tax exemption. We contrast nonprofit's total community benefits to what for-profits provide and distinguish between charity and other community benefits. We find that the value of the tax exemption averages 5.9% of total expenses, while total community benefits average 7.6% of expenses, incremental nonprofit community benefits beyond those provided by for-profits average 5.7% of expenses, and incremental charity alone average 1.7% of expenses. The incremental community benefit exceeds the tax exemption for only 62% of nonprofits. Policymakers should be aware that the tax exemption is a rather blunt instrument, with many nonprofits benefiting greatly from it while providing relatively few community benefits.

Cost-effectiveness of steroid (methylprednisolone) injections versus anaesthetic alone for the treatment of Morton's neuroma: economic evaluation alongside a randomised controlled trial (MortISE trial).

PubMed

Edwards, Rhiannon Tudor; Yeo, Seow Tien; Russell, Daphne; Thomson, Colin E; Beggs, Ian; Gibson, J N Alastair; McMillan, Diane; Martin, Denis J; Russell, Ian T

2015-01-01

Morton's neuroma is a common foot condition affecting health-related quality of life. Though its management frequently includes steroid injections, evidence of cost-effectiveness is sparse. So, we aimed to evaluate whether steroid injection is cost-effective in treating Morton's neuroma compared with anaesthetic injection alone. We undertook incremental cost-effectiveness and cost-utility analyses from the perspective of the National Health Service, alongside a patient-blinded pragmatic randomised trial in hospital-based orthopaedic outpatient clinics in Edinburgh, UK. Of the original randomised sample of 131 participants with Morton's neuroma (including 67 controls), economic analysis focused on 109 (including 55 controls). Both groups received injections guided by ultrasound. We estimated the incremental cost per point improvement in the area under the curve of the Foot Health Thermometer (FHT-AUC) until three months after injection. We also conducted cost-utility analyses using European Quality of life-5 Dimensions-3 Levels (EQ-5D-3L), enhanced by the Foot Health Thermometer (FHT), to estimate utility and thus quality-adjusted life years (QALYs). The unit cost of an ultrasound-guided steroid injection was £149. Over the three months of follow-up, the mean cost of National Health Service resources was £280 for intervention participants and £202 for control participants - a difference of £79 [bootstrapped 95% confidence interval (CI): £18 to £152]. The corresponding estimated incremental cost-effectiveness ratio was £32 per point improvement in the FHT-AUC (bootstrapped 95% CI: £7 to £100). If decision makers value improvement of one point at £100 (the upper limit of this CI), there is 97.5% probability that steroid injection is cost-effective. As EQ-5D-3L seems unresponsive to changes in foot health, we based secondary cost-utility analysis on the FHT-enhanced EQ-5D. This estimated the corresponding incremental cost-effectiveness ratio as £6,400 per QALY. Over the recommended UK threshold, ranging from £20,000 to £30,000 per QALY, there is 80%-85% probability that steroid injection is cost-effective. Steroid injections are effective and cost-effective in relieving foot pain measured by the FHT for three months. However, cost-utility analysis was initially inconclusive because the EQ-5D-3L is less responsive than the FHT to changes in foot health. By using the FHT to enhance the EQ-5D, we inferred that injections yield good value in cost per QALY. Current Controlled Trials ISRCTN13668166.

Analytical three-point Dixon method: With applications for spiral water-fat imaging.

PubMed

Wang, Dinghui; Zwart, Nicholas R; Li, Zhiqiang; Schär, Michael; Pipe, James G

2016-02-01

The goal of this work is to present a new three-point analytical approach with flexible even or uneven echo increments for water-fat separation and to evaluate its feasibility with spiral imaging. Two sets of possible solutions of water and fat are first found analytically. Then, two field maps of the B0 inhomogeneity are obtained by linear regression. The initial identification of the true solution is facilitated by the root-mean-square error of the linear regression and the incorporation of a fat spectrum model. The resolved field map after a region-growing algorithm is refined iteratively for spiral imaging. The final water and fat images are recalculated using a joint water-fat separation and deblurring algorithm. Successful implementations were demonstrated with three-dimensional gradient-echo head imaging and single breathhold abdominal imaging. Spiral, high-resolution T1 -weighted brain images were shown with comparable sharpness to the reference Cartesian images. With appropriate choices of uneven echo increments, it is feasible to resolve the aliasing of the field map voxel-wise. High-quality water-fat spiral imaging can be achieved with the proposed approach. © 2015 Wiley Periodicals, Inc.

Synthetic turbulence

NASA Astrophysics Data System (ADS)

Juneja, A.; Lathrop, D. P.; Sreenivasan, K. R.; Stolovitzky, G.

1994-06-01

A family of schemes is outlined for constructing stochastic fields that are close to turbulence. The fields generated from the more sophisticated versions of these schemes differ little in terms of one-point and two-point statistics from velocity fluctuations in high-Reynolds-number turbulence; we shall designate such fields as synthetic turbulence. All schemes, implemented here in one dimension, consist of the following three ingredients, but differ in various details. First, a simple multiplicative procedure is utilized for generating an intermittent signal which has the same properties as those of the turbulent energy dissipation rate ɛ. Second, the properties of the intermittent signal averaged over an interval of size r are related to those of longitudinal velocity increments Δu(r), evaluated over the same distance r, through a stochastic variable V introduced in the spirit of Kolmogorov's refined similarity hypothesis. The third and final step, which partially resembles a well-known procedure for constructing fractional Brownian motion, consists of suitably combining velocity increments to construct an artificial velocity signal. Various properties of the synthetic turbulence are obtained both analytically and numerically, and found to be in good agreement with measurements made in the atmospheric surface layer. A brief review of some previous models is provided.

Fiscal output data produce versatile graphic-numeric charts

NASA Technical Reports Server (NTRS)

Powell, R. W.; Romo, J. J.

1971-01-01

Refined computerized plotting system produces low-cost graphic-numeric charts that illustrate fiscal data on monthly incremental or cumulative basis, or both. Output is in the form of hard copy or microfilm, or visual-aid transparencies prepared from hard copy for rapid management status presentations.

Chemical and Microbial Characterization of North Slope Viscous Oils to Assess Viscosity Reduction and Enhanced Recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shirish Patil; Abhijit Dandekar; Mary Beth Leigh

2008-12-31

A large proportion of Alaska North Slope (ANS) oil exists in the form of viscous deposits, which cannot be produced entirely using conventional methods. Microbially enhanced oil recovery (MEOR) is a promising approach for improving oil recovery for viscous deposits. MEOR can be achieved using either ex situ approaches such as flooding with microbial biosurfactants or injection of exogenous surfactant-producing microbes into the reservoir, or by in situ approaches such as biostimulation of indigenous surfactant-producing microbes in the oil. Experimental work was performed to analyze the potential application of MEOR to the ANS oil fields through both ex situ andmore » in situ approaches. A microbial formulation containing a known biosurfactant-producing strain of Bacillus licheniformis was developed in order to simulate MEOR. Coreflooding experiments were performed to simulate MEOR and quantify the incremental oil recovery. Properties like viscosity, density, and chemical composition of oil were monitored to propose a mechanism for oil recovery. The microbial formulation significantly increased incremental oil recovery, and molecular biological analyses indicated that the strain survived during the shut-in period. The indigenous microflora of ANS heavy oils was investigated to characterize the microbial communities and test for surfactant producers that are potentially useful for biostimulation. Bacteria that reduce the surface tension of aqueous media were isolated from one of the five ANS oils (Milne Point) and from rock oiled by the Exxon Valdez oil spill (EVOS), and may prove valuable for ex situ MEOR strategies. The total bacterial community composition of the six different oils was evaluated using molecular genetic tools, which revealed that each oil tested possessed a unique fingerprint indicating a diverse bacterial community and varied assemblages. Collectively we have demonstrated that there is potential for in situ and ex situ MEOR of ANS oils. Future work should focus on lab and field-scale testing of ex situ MEOR using Bacillus licheniformis as well as the biosurfactant-producing strains we have newly isolated from the Milne Point reservoir and the EVOS environment.« less

Incremental Refinement of FAÇADE Models with Attribute Grammar from 3d Point Clouds

NASA Astrophysics Data System (ADS)

Dehbi, Y.; Staat, C.; Mandtler, L.; Pl¨umer, L.

2016-06-01

Data acquisition using unmanned aerial vehicles (UAVs) has gotten more and more attention over the last years. Especially in the field of building reconstruction the incremental interpretation of such data is a demanding task. In this context formal grammars play an important role for the top-down identification and reconstruction of building objects. Up to now, the available approaches expect offline data in order to parse an a-priori known grammar. For mapping on demand an on the fly reconstruction based on UAV data is required. An incremental interpretation of the data stream is inevitable. This paper presents an incremental parser of grammar rules for an automatic 3D building reconstruction. The parser enables a model refinement based on new observations with respect to a weighted attribute context-free grammar (WACFG). The falsification or rejection of hypotheses is supported as well. The parser can deal with and adapt available parse trees acquired from previous interpretations or predictions. Parse trees derived so far are updated in an iterative way using transformation rules. A diagnostic step searches for mismatches between current and new nodes. Prior knowledge on façades is incorporated. It is given by probability densities as well as architectural patterns. Since we cannot always assume normal distributions, the derivation of location and shape parameters of building objects is based on a kernel density estimation (KDE). While the level of detail is continuously improved, the geometrical, semantic and topological consistency is ensured.

The impact of higher-order aberrations on the strength of directional signals produced by accommodative microfluctuations

PubMed Central

Metlapally, Sangeetha; Tong, Jianliang L.; Tahir, Humza J.; Schor, Clifton M.

2014-01-01

It has been proposed that the accommodation system could perform contrast discrimination between the two dioptric extremes of accommodative microfluctuations to extract directional signals for reflex accommodation. Higher-order aberrations (HOAs) may have a significant influence on the strength of these contrast signals. Our goal was to compute the effect HOAs may have on contrast signals for stimuli within the upper defocus limit by comparing computed microcontrast fluctuations with psychophysical contrast increment thresholds (Bradley & Ohzawa, 1986). Wavefront aberrations were measured while subjects viewed a Maltese spoke stimulus monocularly. Computations were performed for accommodation or disaccommodation stimuli from a 3 Diopter (D) baseline. Microfluctuations were estimated from the standard deviation of the wavefronts over time at baseline. Through-focus Modulation Transfer, optical contrast increments (ΔC), and Weber fractions (ΔC/C) were derived from point spread functions computed from the wavefronts at baseline for 2 and 4 cycles per degree (cpd) components, with and without HOAs. The ΔCs thus computed from the wavefronts were compared with psychophysical contrast increment threshold data. Microfluctuations are potentially useful for extracting directional information for defocus values within 3 D, where contrast increments for the 2 or 4 cpd components exceed psychophysical thresholds. HOAs largely reduce contrast signals produced by microfluctuations, depending on the mean focus error, and their magnitude in individual subjects, and they may shrink the effective stimulus range for reflex accommodation. The upper defocus limit could therefore be constrained by discrimination of microcontrast fluctuations. PMID:25342542

Value of biologic therapy: a forecasting model in three disease areas.

PubMed

Paramore, L Clark; Hunter, Craig A; Luce, Bryan R; Nordyke, Robert J; Halbert, R J

2010-01-01

Forecast the return on investment (ROI) for advances in biologic therapies in years 2015 and 2030, based upon impact on disease prevalence, morbidity, and mortality for asthma, diabetes, and colorectal cancer. A deterministic, spreadsheet-based, forecasting model was developed based on trends in demographics and disease epidemiology. 'Return' was defined as reductions in disease burden (prevalence, morbidity, mortality) translated into monetary terms; 'investment' was defined as the incremental costs of biologic therapy advances. Data on disease prevalence, morbidity, mortality, and associated costs were obtained from government survey statistics or published literature. Expected impact of advances in biologic therapies was based on expert opinion. Gains in quality-adjusted life years (QALYs) were valued at $100,000 per QALY. The base case analysis, in which reductions in disease prevalence and mortality predicted by the expert panel are not considered, shows the resulting ROIs remain positive for asthma and diabetes but fall below $1 for colorectal cancer. Analysis involving expert panel predictions indicated positive ROI results for all three diseases at both time points, ranging from $207 for each incremental dollar spent on biologic therapies to treat asthma in 2030, to $4 for each incremental dollar spent on biologic therapies to treat colorectal cancer in 2015. If QALYs are not considered, the resulting ROIs remain positive for all three diseases at both time points. Society may expect substantial returns from investments in innovative biologic therapies. These benefits are most likely to be realized in an environment of appropriate use of new molecules. The potential variance between forecasted (from expert opinion) and actual future health outcomes could be significant. Similarly, the forecasted growth in use of biologic therapies relied upon unvalidated market forecasts.

Simulation on Melting Process of Water Using Molecular Dynamics Method

NASA Astrophysics Data System (ADS)

Okawa, Seiji; Saito, Akio; Kang, Chaedong

Simulation on phase change from ice to water was presented using molecular dynamics method. 576molecules were placed in a cell at ice forming arrangement. The volume of the cell was fixed so that the density of ice was kept at 923 kg/m3. Periodic boundary condition was used. According to the phase diagram of water, melting point of ice at the density of 923 kg/m3 is about 400 K. In order to perform melting process from surface, only the molecules near the boundary were scaled at each time step to keep its average temperature at 420 K, and the average temperature of other molecules were set to 350 K as initial condition. By observing time variation of the change in molecular arrangement, it was found that the hydrogen bond network near the boundary surface started to break its configuration and the melting surface moved towards the center until no more ice forming configuration was observed. This phenomenon was also discussed in a form of temperature and energy variation. The total energy increased and reached to a steady state at the time around 6.5 ps. This increment was due to the energy supplied from the boundary at a constant temperature. The temperature in the cell kept almost constant at 380 K during the period between 0.6 and 5.5 ps. This period coincides with melting process observed in molecular arrangement. Hence, it can be said that 380 K corresponds to the melting point. The total energy stored in the cell consisted of sensible and latent heat. Specific heat of water and ice were calculated, and they were found to be 5.6 kJ/kg·K and 3.7 kJ/kg·K, respectively. Hence, latent heat was found to be 316kJ/kg. These values agreed quite well to the physical properties of water.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Shawn

This code consists of Matlab routines which enable the user to perform non-manifold surface reconstruction via triangulation from high dimensional point cloud data. The code was based on an algorithm originally developed in [Freedman (2007), An Incremental Algorithm for Reconstruction of Surfaces of Arbitrary Codimension Computational Geometry: Theory and Applications, 36(2):106-116]. This algorithm has been modified to accommodate non-manifold surface according to the work described in [S. Martin and J.-P. Watson (2009), Non-Manifold Surface Reconstruction from High Dimensional Point Cloud DataSAND #5272610].The motivation for developing the code was a point cloud describing the molecular conformation space of cyclooctane (C8H16). Cyclooctanemore » conformation space was represented using points in 72 dimensions (3 coordinates for each molecule). The code was used to triangulate the point cloud and thereby study the geometry and topology of cyclooctane. Futures applications are envisioned for peptides and proteins.« less

Memory persistency and nonlinearity in daily mean dew point across India

NASA Astrophysics Data System (ADS)

Ray, Rajdeep; Khondekar, Mofazzal Hossain; Ghosh, Koushik; Bhattacharjee, Anup Kumar

2016-04-01

Enterprising endeavour has been taken in this work to realize and estimate the persistence in memory of the daily mean dew point time series obtained from seven different weather stations viz. Kolkata, Chennai (Madras), New Delhi, Mumbai (Bombay), Bhopal, Agartala and Ahmedabad representing different geographical zones in India. Hurst exponent values reveal an anti-persistent behaviour of these dew point series. To affirm the Hurst exponent values, five different scaling methods have been used and the corresponding results are compared to synthesize a finer and reliable conclusion out of it. The present analysis also bespeaks that the variation in daily mean dew point is governed by a non-stationary process with stationary increments. The delay vector variance (DVV) method has been exploited to investigate nonlinearity, and the present calculation confirms the presence of deterministic nonlinear profile in the daily mean dew point time series of the seven stations.

The effect of porosity on the mechanical properties of porous titanium scaffolds: comparative study on experimental and analytical values

NASA Astrophysics Data System (ADS)

Khodaei, Mohammad; Fathi, Mohammadhossein; Meratian, Mahmood; Savabi, Omid

2018-05-01

Reducing the elastic modulus and also improving biological fixation to the bone is possible by using porous scaffolds. In the present study, porous titanium scaffolds containing different porosities were fabricated using the space holder method. Pore distribution, formed phases and mechanical properties of titanium scaffolds were studied by Scanning Electron Microscope (SEM), x-ray diffraction (XRD) and cold compression test. Then the results of compression test were compared to the Gibson-Ashby model. Both experimentally measured and analytically calculated elastic modulus of porous titanium scaffolds decreased by porosity increment. The compliance between experimentally measured and analytically calculated elastic modulus of titanium scaffolds are also increased by porosity increment.

Selected advanced aerodynamics and active controls technology concepts development on a derivative B-747

NASA Technical Reports Server (NTRS)

1980-01-01

The feasibility of applying wing tip extensions, winglets, and active control wing load alleviation to the Boeing 747 is investigated. Winglet aerodynamic design methods and high speed wind tunnel test results of winglets and of symmetrically deflected ailerons are presented. Structural resizing analyses to determine weight and aeroelastic twist increments for all the concepts and flutter model test results for the wing with winglets are included. Control law development, system mechanization/reliability studies, and aileron balance tab trade studies for active wing load alleviation systems are discussed. Results are presented in the form of incremental effects on L/D, structural weight, block fuel savings, stability and control, airplane price, and airline operating economics.

A MPPT Algorithm Based PV System Connected to Single Phase Voltage Controlled Grid

NASA Astrophysics Data System (ADS)

Sreekanth, G.; Narender Reddy, N.; Durga Prasad, A.; Nagendrababu, V.

2012-10-01

Future ancillary services provided by photovoltaic (PV) systems could facilitate their penetration in power systems. In addition, low-power PV systems can be designed to improve the power quality. This paper presents a single-phase PV systemthat provides grid voltage support and compensation of harmonic distortion at the point of common coupling thanks to a repetitive controller. The power provided by the PV panels is controlled by a Maximum Power Point Tracking algorithm based on the incremental conductance method specifically modified to control the phase of the PV inverter voltage. Simulation and experimental results validate the presented solution.

Incrementally developing a cultural and regulatory infrastructure for reusable launch vehicles

NASA Astrophysics Data System (ADS)

Simberg, Rand

1998-01-01

At this point in time, technology is perhaps the least significant barrier to the development of high-flight-rate, reusable launchers, necessary for low-cost space access. Much more daunting are the issues of regulatory regimes, needed markets, and public/investor perception of their feasibility. The approach currently the focus of the government (X-33) assumes that the necessary conditions will be in place to support a new reusable launch vehicle in the Shuttle class at the end of the X-33 development. For a number of reasons (market size, lack of confidence in the technology, regulations designed for expendable vehicles, difficulties in capital formation) such an approach may prove too rapid a leap for success. More incremental steps, both experimental and operational, could be a higher-probability path to achieving the goal of cheap access through reusables. Such incrementalism, via intermediate vehicles (possibly multi-stage) exploiting suborbital and smaller-payload markets, could provide the gradual acclimatization of the public, regulatory and investment communities to reusable launchers, and build the confidence necessary to go on to subsequent steps to provide truly cheap access, while providing lower-cost access much sooner.

Functional data analysis on ground reaction force of military load carriage increment

NASA Astrophysics Data System (ADS)

Din, Wan Rozita Wan; Rambely, Azmin Sham

2014-06-01

Analysis of ground reaction force on military load carriage is done through functional data analysis (FDA) statistical technique. The main objective of the research is to investigate the effect of 10% load increment and to find the maximum suitable load for the Malaysian military. Ten military soldiers age 31 ± 6.2 years, weigh 71.6 ± 10.4 kg and height of 166.3 ± 5.9 cm carrying different military load range from 0% body weight (BW) up to 40% BW participated in an experiment to gather the GRF and kinematic data using Vicon Motion Analysis System, Kirstler force plates and thirty nine body markers. The analysis is conducted in sagittal, medial lateral and anterior posterior planes. The results show that 10% BW load increment has an effect when heel strike and toe-off for all the three planes analyzed with P-value less than 0.001 at 0.05 significant levels. FDA proves to be one of the best statistical techniques in analyzing the functional data. It has the ability to handle filtering, smoothing and curve aligning according to curve features and points of interest.

The design of transfer trajectory for Ivar asteroid exploration mission

NASA Astrophysics Data System (ADS)

Qiao, Dong; Cui, Hutao; Cui, Pingyuan

2009-12-01

An impending demand for exploring the small bodies, such as the comets and the asteroids, envisioned the Chinese Deep Space exploration mission to the Near Earth asteroid Ivar. A design and optimal method of transfer trajectory for asteroid Ivar is discussed in this paper. The transfer trajectory for rendezvous with asteroid Ivar is designed by means of Earth gravity assist with deep space maneuver (Delta-VEGA) technology. A Delta-VEGA transfer trajectory is realized by several trajectory segments, which connect the deep space maneuver and swingby point. Each trajectory segment is found by solving Lambert problem. Through adjusting deep maneuver and arrival time, the match condition of swingby is satisfied. To reduce the total mission velocity increments further, a procedure is developed which minimizes total velocity increments for this scheme of transfer trajectory for asteroid Ivar. The trajectory optimization problem is solved with a quasi-Newton algorithm utilizing analytic first derivatives, which are derived from the transversality conditions associated with the optimization formulation and primer vector theory. The simulation results show the scheme for transfer trajectory causes C3 and total velocity increments decrease of 48.80% and 13.20%, respectively.

SAMS Acceleration Measurements on Mir (NASA Increment 4)

NASA Technical Reports Server (NTRS)

DeLombard, Richard

1998-01-01

During NASA Increment 4 (January to May 1997), about 5 gigabytes of acceleration data were collected by the Space Acceleration Measurements System (SAMS) onboard the Russian Space Station, Mir. The data were recorded on 28 optical disks which were returned to Earth on STS-84. During this increment, SAMS data were collected in the Priroda module to support the Mir Structural Dynamics Experiment (MiSDE), the Binary Colloidal Alloy Tests (BCAT), Angular Liquid Bridge (ALB), Candle Flames in Microgravity (CFM), Diffusion Controlled Apparatus Module (DCAM), Enhanced Dynamic Load Sensors (EDLS), Forced Flow Flame Spreading Test (FFFr), Liquid Metal Diffusion (LMD), Protein Crystal Growth in Dewar (PCG/Dewar), Queen's University Experiments in Liquid Diffusion (QUELD), and Technical Evaluation of MIM (TEM). This report points out some of the salient features of the microgravity environment to which these experiments were exposed. Also documented are mission events of interest such as the docked phase of STS-84 operations, a Progress engine bum, Soyuz vehicle docking and undocking, and Progress vehicle docking. This report presents an overview of the SAMS acceleration measurements recorded by 10 Hz and 100 Hz sensor heads. The analyses included herein complement those presented in previous summary reports prepared by the Principal Investigator Microgravity Services (PIMS) group.

Thermally promoted evolution of open-volume defects and Cu precipitates in the deformed FeCu alloys

NASA Astrophysics Data System (ADS)

Jin, Shuoxue; Cao, Xingzhong; Cheng, Guodong; Lian, Xiangyu; Zhu, Te; Zhang, Peng; Yu, Runsheng; Wang, Baoyi

2018-04-01

We have studied the effect of isothermal annealing on the evolution of the open-volume defect and the Cu precipitate in deformed Fe0.15Cu, Fe0.3Cu and Fe0.6Cu alloys. Using the coincidence Doppler broadening, positron annihilation lifetime and the S-W couples, the evolution of local electronic circumstance around the annihilation sites, open-volume defects and interaction between open-volume defects and Cu precipitates were measured as a function of the isothermal annealing temperatures. Cold rolling deformation induced an obvious increment in S parameters due to the formation of open-volume defects. Annealing not only resulted in gradual recovery of open-volume defects and Cu thermal precipitation, but also promoted the combination and interaction between defects and Cu precipitates. The interaction between open-volume defects and Cu precipitates was revealed clearly by the view point of S-W relationship. The S-W interaction for the different CumVn complexes was also calculated theoretically by MIKA-Doppler, which supports our experimental observations qualitatively. The results indicate that open-volume defects were formed first after cold rolling, followed by the Cu precipitation and recovery of open-volume defects, Cu precipitates recovered at the end. It is interesting that the trajectory of (S, W) points with increasing annealing temperature formed a similar closed "Parallelogram" shape. It is benefit for revealing the behavior of Cu thermal precipitation and their evolution in various Cu-bearing steels under thermal treatment. In addition, we also investigated the Cu content effect on the Cu precipitation in FeCu alloys, and the Cu precipitate phenomenon was enhanced in higher Cu content alloys.

The 3-D unstructured mesh generation using local transformations

NASA Technical Reports Server (NTRS)

Barth, Timothy J.

1993-01-01

The topics are presented in viewgraph form and include the following: 3D combinatorial edge swapping; 3D incremental triangulation via local transformations; a new approach to multigrid for unstructured meshes; surface mesh generation using local transforms; volume triangulations; viscous mesh generation; and future directions.

Studies on the finite element simulation in sheet metal stamping processes

NASA Astrophysics Data System (ADS)

Huang, Ying

The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by Newton-Raphson iteration. The computer implementation of the generalized multi-step inverse FEM is also presented. By comparing to the simulation results using a commercial software system, the effectiveness of the new method is validated. Other than the product design, the punch motion (including punch speed and punch trajectory) of the stamping press also has significant effect on the formability and the quality of the product. In fact, this is one of the major reasons why hydraulic presses and/or servo presses are used for parts which demand high quality. In order to reveal the quantitative correlation between the punch motion and the part quality, the Cowper-Symonds strain rate constitutive model and the implicit dynamic incremental FEM are combined to conduct the research. The effects of the punch motion on the part quality, especially the plastic strain distribution and the potential springback, have been investigated for the deep drawing and the bending processes respectively. A qualitative relationship between the punch motion and the part quality is also derived. The reaction force of the punch motion causes the dynamic deformation of the press during the stamping, which in turn influences the part quality as well. This dynamic information, in the form of the strain signal, is an important basis for the on-line monitoring of the part quality. By using the actual force as the input to the press, the incremental FEM is needed to predict the strain of the press. The result is validated by means of experiments and can be used to assist the on-line monitoring.

Tracking the global maximum power point of PV arrays under partial shading conditions

NASA Astrophysics Data System (ADS)

Fennich, Meryem

This thesis presents the theoretical and simulation studies of the global maximum power point tracking (MPPT) for photovoltaic systems under partial shading. The main goal is to track the maximum power point of the photovoltaic module so that the maximum possible power can be extracted from the photovoltaic panels. When several panels are connected in series with some of them shaded partially either due to clouds or shadows from neighboring buildings, several local maxima appear in the power vs. voltage curve. A power increment based MPPT algorithm is effective in identifying the global maximum from the several local maxima. Several existing MPPT algorithms are explored and the state-of-the-art power increment method is simulated and tested for various partial shading conditions. The current-voltage and power-voltage characteristics of the PV model are studied under different partial shading conditions, along with five different cases demonstrating how the MPPT algorithm performs when shading switches from one state to another. Each case is supplemented with simulation results. The method of tracking the Global MPP is based on controlling the DC-DC converter connected to the output of the PV array. A complete system simulation including the PV array, the direct current to direct current (DC-DC) converter and the MPPT is presented and tested using MATLAB software. The simulation results show that the MPPT algorithm works very well with the buck converter, while the boost converter needs further changes and implementation.

Prefrontal cortex haemodynamics and affective responses during exercise: a multi-channel near infrared spectroscopy study.

PubMed

Tempest, Gavin D; Eston, Roger G; Parfitt, Gaynor

2014-01-01

The dose-response effects of the intensity of exercise upon the potential regulation (through top-down processes) of affective (pleasure-displeasure) responses in the prefrontal cortex during an incremental exercise protocol have not been explored. This study examined the functional capacity of the prefrontal cortex (reflected by haemodynamics using near infrared spectroscopy) and affective responses during exercise at different intensities. Participants completed an incremental cycling exercise test to exhaustion. Changes (Δ) in oxygenation (O2Hb), deoxygenation (HHb), blood volume (tHb) and haemoglobin difference (HbDiff) were measured from bilateral dorsal and ventral prefrontal areas. Affective responses were measured every minute during exercise. Data were extracted at intensities standardised to: below ventilatory threshold, at ventilatory threshold, respiratory compensation point and the end of exercise. During exercise at intensities from ventilatory threshold to respiratory compensation point, ΔO2Hb, ΔHbDiff and ΔtHb were greater in mostly ventral than dorsal regions. From the respiratory compensation point to the end of exercise, ΔO2Hb remained stable and ΔHbDiff declined in dorsal regions. As the intensity increased above the ventilatory threshold, inverse associations between affective responses and oxygenation in (a) all regions of the left hemisphere and (b) lateral (dorsal and ventral) regions followed by the midline (ventral) region in the right hemisphere were observed. Differential activation patterns occur within the prefrontal cortex and are associated with affective responses during cycling exercise.

Prefrontal Cortex Haemodynamics and Affective Responses during Exercise: A Multi-Channel Near Infrared Spectroscopy Study

PubMed Central

Tempest, Gavin D.; Eston, Roger G.; Parfitt, Gaynor

2014-01-01

The dose-response effects of the intensity of exercise upon the potential regulation (through top-down processes) of affective (pleasure-displeasure) responses in the prefrontal cortex during an incremental exercise protocol have not been explored. This study examined the functional capacity of the prefrontal cortex (reflected by haemodynamics using near infrared spectroscopy) and affective responses during exercise at different intensities. Participants completed an incremental cycling exercise test to exhaustion. Changes (Δ) in oxygenation (O2Hb), deoxygenation (HHb), blood volume (tHb) and haemoglobin difference (HbDiff) were measured from bilateral dorsal and ventral prefrontal areas. Affective responses were measured every minute during exercise. Data were extracted at intensities standardised to: below ventilatory threshold, at ventilatory threshold, respiratory compensation point and the end of exercise. During exercise at intensities from ventilatory threshold to respiratory compensation point, ΔO2Hb, ΔHbDiff and ΔtHb were greater in mostly ventral than dorsal regions. From the respiratory compensation point to the end of exercise, ΔO2Hb remained stable and ΔHbDiff declined in dorsal regions. As the intensity increased above the ventilatory threshold, inverse associations between affective responses and oxygenation in (a) all regions of the left hemisphere and (b) lateral (dorsal and ventral) regions followed by the midline (ventral) region in the right hemisphere were observed. Differential activation patterns occur within the prefrontal cortex and are associated with affective responses during cycling exercise. PMID:24788166

Plasticity in variation of xylem and phloem cell characteristics of Norway spruce under different local conditions

PubMed Central

Gričar, Jožica; Prislan, Peter; de Luis, Martin; Gryc, Vladimír; Hacurová, Jana; Vavrčík, Hanuš; Čufar, Katarina

2015-01-01

There is limited information on intra-annual plasticity of secondary tissues of tree species growing under different environmental conditions. To increase the knowledge about the plasticity of secondary growth, which allows trees to adapt to specific local climatic regimes, we examined climate–radial growth relationships of Norway spruce [Picea abies (L.) H. Karst.] from three contrasting locations in the temperate climatic zone by analyzing tree-ring widths for the period 1932–2010, and cell characteristics in xylem and phloem increments formed in the years 2009–2011. Variation in the structure of xylem and phloem increments clearly shows that plasticity in seasonal dynamics of cambial cell production and cell differentiation exists on xylem and phloem sides. Anatomical characteristics of xylem and phloem cells are predominantly site-specific characteristics, because they varied among sites but were fairly uniform among years in trees from the same site. Xylem and phloem tissues formed in the first part of the growing season seemed to be more stable in structure, indicating their priority over latewood and late phloem for tree performance. Long-term climate and radial growth analyses revealed that growth was in general less dependent on precipitation than on temperature; however, growth sensitivity to local conditions differed among the sites. Only partial dependence of radial growth of spruce on climatic factors on the selected sites confirms its strategy to adapt the structure of wood and phloem increments to function optimally in local conditions. PMID:26442044

Numerical simulation on chain-die forming of an AHSS top-hat section

NASA Astrophysics Data System (ADS)

Majji, Raju; Xiang, Yang; Ding, Scott; Yang, Chunhui

2018-05-01

The applications of Advanced High-Strength Steels (AHSS) in the automotive industry are rapidly increasing due to a demand for a lightweight material that significantly reduces fuel consumption without compromising passenger safety. Automotive industries and material suppliers are expected by consumers to deliver reliable and affordable products, thus stimulating these manufacturers to research solutions to meet these customer requirements. The primary advantage of AHSS is its extremely high strength to weight ratio, an ideal material for the automotive industry. However, its low ductility is a major disadvantage, in particular, when using traditional cold forming processes such as roll forming and deep drawing process to form profiles. Consequently, AHSS parts frequently fail to form. Thereby, in order to improve quality and reliability on manufacturing AHSS products, a recently-developed incremental cold sheet metal forming technology called Chain-die Forming (CDF) is recognised as a potential solution to the forming process of AHSS. The typical CDF process is a combination of bending and roll forming processes which is equivalent to a roll with a large deforming radius, and incrementally forms the desired shape with split die and segments. This study focuses on manufacturing an AHSS top-hat section with minimum passes without geometrical or surface defects by using finite element modelling and simulations. The developed numerical simulation is employed to investigate the influences on the main control parameter of the CDF process while forming AHSS products and further develop new die-punch sets of compensation design via a numerical optimal process. In addition, the study focuses on the tool design to compensate spring-back and reduce friction between tooling and sheet-metal. This reduces the number of passes, thereby improving productivity and reducing energy consumption and material waste. This numerical study reveals that CDF forms AHSS products of complex profiles with much less residual stress, low spring back, low strain and of higher geometrical accuracy compared to other traditional manufacturing processes.

Upper-Air Quality Control, A Comparison Study

DTIC Science & Technology

1993-12-01

hydrostatic different quadrant . From these four increments the check is based on the redundancy of reported value of the point in question is interpolated...NUAV COCHT NUAV Europa (01-17) 5,347 4,900 214 432 4.00 8.82 Former USSR (20-38) 9,152 8,824 838 704 9.16 .98 Aa (40-41, 44-48) 3,868 3,797 443 295 11.45

2010 Combat Vehicles Conference

DTIC Science & Technology

2010-11-09

7 The Tactical Wheeled Vehicle Challenge… Performance ProtectionPayload Weight Mobility Transportability Cost / Benefit The fully burdened cost of...employment of robotic systems 10 Ground Combat Vehicle… Versatility – Configuration and employment options – Employed across full range of military...Synchronization 11-12 13-14 15-16 17-18 19-20 21-22 23-24 25-26 = Increment Point STOP STOP ~ 2034 Developing a Combat Vehicle Strategy… 11 “… robotics

Exploring How Nature and Nurture Affect the Development of Reading: An Analysis of the Florida Twin Project on Reading

ERIC Educational Resources Information Center

Hart, Sara A.; Logan, Jessica A. R.; Soden-Hensler, Brooke; Kershaw, Sarah; Taylor, Jeanette; Schatschneider, Christopher

2013-01-01

Research on the development of reading skills through the primary school years has pointed to the importance of individual differences in initial ability as well as the growth of those skills. Additionally, it has been theorized that reading skills develop incrementally. The present study examined the genetic and environmental influences on 2…

The influence of fipronil on Reticulitermes flavipes (Isoptera: Rhinotermitidae) feeding beyond treated plots

Treesearch

Thomas Shelton

2013-01-01

A small-plot field trial was conducted to examine the area of influence of fipronil at incremental distances away from treated plots on the Harrison Experimental Forest near Saucier, MS. Small treated (water and fipronil) plots were surrounded by untreated wooden boards in an eight-point radial pattern, and examined for evidence of termite feeding every 60 d for 1 yr...

Parkinson Symptoms and Health Related Quality of Life as Predictors of Costs: A Longitudinal Observational Study with Linear Mixed Model Analysis

PubMed Central

Martinez-Martín, Pablo; Rodriguez-Blazquez, Carmen; Paz, Silvia; Forjaz, Maria João; Frades-Payo, Belén; Cubo, Esther; de Pedro-Cuesta, Jesús; Lizán, Luis

2015-01-01

Objective To estimate the magnitude in which Parkinson’s disease (PD) symptoms and health- related quality of life (HRQoL) determined PD costs over a 4-year period. Materials and Methods Data collected during 3-month, each year, for 4 years, from the ELEP study, included sociodemographic, clinical and use of resources information. Costs were calculated yearly, as mean 3-month costs/patient and updated to Spanish €, 2012. Mixed linear models were performed to analyze total, direct and indirect costs based on symptoms and HRQoL. Results One-hundred and seventy four patients were included. Mean (SD) age: 63 (11) years, mean (SD) disease duration: 8 (6) years. Ninety-three percent were HY I, II or III (mild or moderate disease). Forty-nine percent remained in the same stage during the study period. Clinical evaluation and HRQoL scales showed relatively slight changes over time, demonstrating a stable group overall. Mean (SD) PD total costs augmented 92.5%, from €2,082.17 (€2,889.86) in year 1 to €4,008.6 (€7,757.35) in year 4. Total, direct and indirect cost incremented 45.96%, 35.63%, and 69.69% for mild disease, respectively, whereas increased 166.52% for total, 55.68% for direct and 347.85% for indirect cost in patients with moderate PD. For severe patients, cost remained almost the same throughout the study. For each additional point in the SCOPA-Motor scale total costs increased €75.72 (p = 0.0174); for each additional point on SCOPA-Motor and the SCOPA-COG, direct costs incremented €49.21 (p = 0.0094) and €44.81 (p = 0.0404), respectively; and for each extra point on the pain scale, indirect costs increased €16.31 (p = 0.0228). Conclusions PD is an expensive disease in Spain. Disease progression and severity as well as motor and cognitive dysfunctions are major drivers of costs increments. Therapeutic measures aimed at controlling progression and symptoms could help contain disease expenses. PMID:26698860

Parkinson Symptoms and Health Related Quality of Life as Predictors of Costs: A Longitudinal Observational Study with Linear Mixed Model Analysis.

PubMed

Martinez-Martín, Pablo; Rodriguez-Blazquez, Carmen; Paz, Silvia; Forjaz, Maria João; Frades-Payo, Belén; Cubo, Esther; de Pedro-Cuesta, Jesús; Lizán, Luis

2015-01-01

To estimate the magnitude in which Parkinson's disease (PD) symptoms and health- related quality of life (HRQoL) determined PD costs over a 4-year period. Data collected during 3-month, each year, for 4 years, from the ELEP study, included sociodemographic, clinical and use of resources information. Costs were calculated yearly, as mean 3-month costs/patient and updated to Spanish €, 2012. Mixed linear models were performed to analyze total, direct and indirect costs based on symptoms and HRQoL. One-hundred and seventy four patients were included. Mean (SD) age: 63 (11) years, mean (SD) disease duration: 8 (6) years. Ninety-three percent were HY I, II or III (mild or moderate disease). Forty-nine percent remained in the same stage during the study period. Clinical evaluation and HRQoL scales showed relatively slight changes over time, demonstrating a stable group overall. Mean (SD) PD total costs augmented 92.5%, from € 2,082.17 (€ 2,889.86) in year 1 to € 4,008.6 (€ 7,757.35) in year 4. Total, direct and indirect cost incremented 45.96%, 35.63%, and 69.69% for mild disease, respectively, whereas increased 166.52% for total, 55.68% for direct and 347.85% for indirect cost in patients with moderate PD. For severe patients, cost remained almost the same throughout the study. For each additional point in the SCOPA-Motor scale total costs increased € 75.72 (p = 0.0174); for each additional point on SCOPA-Motor and the SCOPA-COG, direct costs incremented € 49.21 (p = 0.0094) and € 44.81 (p = 0.0404), respectively; and for each extra point on the pain scale, indirect costs increased € 16.31 (p = 0.0228). PD is an expensive disease in Spain. Disease progression and severity as well as motor and cognitive dysfunctions are major drivers of costs increments. Therapeutic measures aimed at controlling progression and symptoms could help contain disease expenses.

The impact of a patient support program for multiple sclerosis on patient satisfaction and subjective health status.

PubMed

Kohlmann, Thomas; Wang, Cheng; Lipinski, Jens; Hadker, Nandini; Caffrey, Elizabeth; Epstein, Michael; Sadasivan, Ravi; Gondek, Kathleen

2013-06-01

Leading multiple sclerosis (MS) therapies have patient support programs (PSPs) aimed at improving patients' lives. There is limited knowledge about what drives patient satisfaction with PSPs and little evidence about its impact on patient-reported health status or health-related quality of life. The aims of this study were to evaluate patient needs and the PSP's role in meeting those needs; understand the drivers of PSP satisfaction and loyalty; and assess whether a MS PSP provides quantifiable, incremental benefit to patients, as measured by patient-reported health status, health state utility, and/or health-related quality of life. An Internet survey was conducted among 1,123 adult German MS patients currently enrolled in Bayer's German BETAPLUS PSP. Health status, health state utility, and health-related quality of life were measured using the EQ-5D Visual Analog Scale, the EQ-5D Index, and Short Form-12 Health Survey, respectively. MS patient needs vary by disease severity, duration of disease, and gender. Patients with greater self-reported needs and lower health status, health state utility, and health-related quality of life value and use the PSP more than other patients. Drivers of PSP satisfaction include use of patient hotline, nurse telephone calls, and mail education. Patients estimate that their health status would be 15 points lower if the PSP ceased to exist (translating to 0.15 on the time trade-off utility scale). This impact is significant, as it is nearly two times the minimally important difference. MS patients place inherent value on PSPs. From a patient's viewpoint, PSPs provide real incremental benefit in patient-reported health status at all stages of MS.

The Lactate Minimum Test: Concept, Methodological Aspects and Insights for Future Investigations in Human and Animal Models

PubMed Central

Messias, Leonardo H. D.; Gobatto, Claudio A.; Beck, Wladimir R.; Manchado-Gobatto, Fúlvia B.

2017-01-01

In 1993, Uwe Tegtbur proposed a useful physiological protocol named the lactate minimum test (LMT). This test consists of three distinct phases. Firstly, subjects must perform high intensity efforts to induce hyperlactatemia (phase 1). Subsequently, 8 min of recovery are allowed for transposition of lactate from myocytes (for instance) to the bloodstream (phase 2). Right after the recovery, subjects are submitted to an incremental test until exhaustion (phase 3). The blood lactate concentration is expected to fall during the first stages of the incremental test and as the intensity increases in subsequent stages, to rise again forming a “U” shaped blood lactate kinetic. The minimum point of this curve, named the lactate minimum intensity (LMI), provides an estimation of the intensity that represents the balance between the appearance and clearance of arterial blood lactate, known as the maximal lactate steady state intensity (iMLSS). Furthermore, in addition to the iMLSS estimation, studies have also determined anaerobic parameters (e.g., peak, mean, and minimum force/power) during phase 1 and also the maximum oxygen consumption in phase 3; therefore, the LMT is considered a robust physiological protocol. Although, encouraging reports have been published in both human and animal models, there are still some controversies regarding three main factors: (1) the influence of methodological aspects on the LMT parameters; (2) LMT effectiveness for monitoring training effects; and (3) the LMI as a valid iMLSS estimator. Therefore, the aim of this review is to provide a balanced discussion between scientific evidence of the aforementioned issues, and insights for future investigations are suggested. In summary, further analyses is necessary to determine whether these factors are worthy, since the LMT is relevant in several contexts of health sciences. PMID:28642717

Four-Point-Latching Microactuator

NASA Technical Reports Server (NTRS)

Toda, Risaku; Yang, Eui-Hyeok

2008-01-01

An experimental inchworm-type linear microactuator is depicted. This microactuator is a successor to one described in "MEMS-Based Piezoelectric/Electrostatic Inchworm Actuator" (NPO-30672), NASA Tech Briefs, Vol. 27, No. 6 (June 2003), page 68. Both actuators are based on the principle of using a piezoelectric transducer operated in alternation with electrostatically actuated clutches to cause a slider to move in small increments. However, the design of the present actuator incorporates several improvements over that of the previous one. The most readily apparent improvement is in geometry and, consequently, in fabrication: In the previous actuator, the inchworm motion was perpendicular to the broad faces of a flat silicon wafer on which the actuator was fabricated, and fabrication involved complex processes to form complex three-dimensional shapes in and on the wafer. In the present actuator, the inchworm motion is parallel to the broad faces of a wafer on which it is fabricated. The components needed to produce the in-plane motion are nearly planar in character and, consequently, easier to fabricate. Other advantages of the present design are described, including that the previous actuator contained two clutches (denoted 'holders' in the cited prior article), the present actuator contains four clutches. The operational sequence of the previous two-clutch actuator is similar. However, the two-clutch configuration is susceptible to tilt of the slider and a consequent large increase in drag. Hence, the primary operational advantages of the present four-point-latching design over the prior two-point-latching design are less drag and greater control robustness arising from greater stability of the orientation of the slider.

Association between progression-free survival and health-related quality of life in oncology: a systematic review protocol

PubMed Central

Kovic, Bruno; Guyatt, Gordon; Brundage, Michael; Thabane, Lehana; Bhatnagar, Neera; Xie, Feng

2016-01-01

Introduction There is an increasing number of new oncology drugs being studied, approved and put into clinical practice based on improvement in progression-free survival, when no overall survival benefits exist. In oncology, the association between progression-free survival and health-related quality of life is currently unknown, despite its importance for patients with cancer, and the unverified assumption that longer progression-free survival indicates improved health-related quality of life. Thus far, only 1 study has investigated this association, providing insufficient evidence and inconclusive results. The objective of this study protocol is to provide increased transparency in supporting a systematic summary of the evidence bearing on this association in oncology. Methods and analysis Using the OVID platform in MEDLINE, Embase and Cochrane databases, we will conduct a systematic review of randomised controlled human trials addressing oncology issues published starting in 2000. A team of reviewers will, in pairs, independently screen and abstract data using standardised, pilot-tested forms. We will employ numerical integration to calculate mean incremental area under the curve between treatment groups in studies for health-related quality of life, along with total related error estimates, and a 95% CI around incremental area. To describe the progression-free survival to health-related quality of life association, we will construct a scatterplot for incremental health-related quality of life versus incremental progression-free survival. To estimate the association, we will use a weighted simple regression approach, comparing mean incremental health-related quality of life with either median incremental progression-free survival time or the progression-free survival HR, in the absence of overall survival benefit. Discussion Identifying direction and magnitude of association between progression-free survival and health-related quality of life is critically important in interpreting results of oncology trials. Systematic evidence produced from our study will contribute to improvement of patient care and practice of evidence-based medicine in oncology. PMID:27591026

Inequality of Size and Size Increment in Pinus banksiana in Relation to Stand Dynamics and Annual Growth Rate

PubMed Central

Metsaranta, Juha M.; Lieffers, Victor J.

2008-01-01

Background and Aims Changes in size inequality in tree populations are often attributed to changes in the mode of competition over time. The mode of competition may also fluctuate annually in response to variation in growing conditions. Factors causing growth rate to vary can also influence competition processes, and thus influence how size hierarchies develop. Methods Detailed data obtained by tree-ring reconstruction were used to study annual changes in size and size increment inequality in several even-aged, fire-origin jack pine (Pinus banksiana) stands in the boreal shield and boreal plains ecozones in Saskatchewan and Manitoba, Canada, by using the Gini and Lorenz asymmetry coefficients. Key Results The inequality of size was related to variables reflecting long-term stand dynamics (e.g. stand density, mean tree size and average competition, as quantified using a distance-weighted absolute size index). The inequality of size increment was greater and more variable than the inequality of size. Inequality of size increment was significantly related to annual growth rate at the stand level, and was higher when growth rate was low. Inequality of size increment was usually due primarily to large numbers of trees with low growth rates, except during years with low growth rate when it was often due to small numbers of trees with high growth rates. The amount of competition to which individual trees were subject was not strongly related to the inequality of size increment. Conclusions Differences in growth rate among trees during years of poor growth may form the basis for development of size hierarchies on which asymmetric competition can act. A complete understanding of the dynamics of these forests requires further evaluation of the way in which factors that influence variation in annual growth rate also affect the mode of competition and the development of size hierarchies. PMID:18089583

Inequality of size and size increment in Pinus banksiana in relation to stand dynamics and annual growth rate.

PubMed

Metsaranta, Juha M; Lieffers, Victor J

2008-03-01

Changes in size inequality in tree populations are often attributed to changes in the mode of competition over time. The mode of competition may also fluctuate annually in response to variation in growing conditions. Factors causing growth rate to vary can also influence competition processes, and thus influence how size hierarchies develop. Detailed data obtained by tree-ring reconstruction were used to study annual changes in size and size increment inequality in several even-aged, fire-origin jack pine (Pinus banksiana) stands in the boreal shield and boreal plains ecozones in Saskatchewan and Manitoba, Canada, by using the Gini and Lorenz asymmetry coefficients. The inequality of size was related to variables reflecting long-term stand dynamics (e.g. stand density, mean tree size and average competition, as quantified using a distance-weighted absolute size index). The inequality of size increment was greater and more variable than the inequality of size. Inequality of size increment was significantly related to annual growth rate at the stand level, and was higher when growth rate was low. Inequality of size increment was usually due primarily to large numbers of trees with low growth rates, except during years with low growth rate when it was often due to small numbers of trees with high growth rates. The amount of competition to which individual trees were subject was not strongly related to the inequality of size increment. Differences in growth rate among trees during years of poor growth may form the basis for development of size hierarchies on which asymmetric competition can act. A complete understanding of the dynamics of these forests requires further evaluation of the way in which factors that influence variation in annual growth rate also affect the mode of competition and the development of size hierarchies.

Flexible Processing and the Design of Grammar

ERIC Educational Resources Information Center

Sag, Ivan A.; Wasow, Thomas

2015-01-01

We explore the consequences of letting the incremental and integrative nature of language processing inform the design of competence grammar. What emerges is a view of grammar as a system of local monotonic constraints that provide a direct characterization of the signs (the form-meaning correspondences) of a given language. This…

Perfectionism and the Five-Factor Model of Personality

ERIC Educational Resources Information Center

Rice, Kenneth G.; Ashby, Jeffrey S.; Slaney, Robert B.

2007-01-01

In this study of the discriminant, convergent, and incremental validity of the Almost Perfect Scale-Revised (APS-R), university students completed the APS-R, additional measures of perfectionism, the NEO Five-Factor Inventory-Form S, and measures of self-esteem and depression. The results revealed expected significant, but not completely…

8 CFR 212.15 - Certificates for foreign health care workers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... occupational therapy or physical therapy. (ii) Registered nurses and other health care workers requiring the... care workers, or certified statements to nurses shall submit Form I-905, Application for Authorization... certificates to foreign health care workers or certified statements to nurses will be made in 5-year increments...

8 CFR 212.15 - Certificates for foreign health care workers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... occupational therapy or physical therapy. (ii) Registered nurses and other health care workers requiring the... care workers, or certified statements to nurses shall submit Form I-905, Application for Authorization... certificates to foreign health care workers or certified statements to nurses will be made in 5-year increments...

Reducing errors benefits the field-based learning of a fundamental movement skill in children.

PubMed

Capio, C M; Poolton, J M; Sit, C H P; Holmstrom, M; Masters, R S W

2013-03-01

Proficient fundamental movement skills (FMS) are believed to form the basis of more complex movement patterns in sports. This study examined the development of the FMS of overhand throwing in children through either an error-reduced (ER) or error-strewn (ES) training program. Students (n = 216), aged 8-12 years (M = 9.16, SD = 0.96), practiced overhand throwing in either a program that reduced errors during practice (ER) or one that was ES. ER program reduced errors by incrementally raising the task difficulty, while the ES program had an incremental lowering of task difficulty. Process-oriented assessment of throwing movement form (Test of Gross Motor Development-2) and product-oriented assessment of throwing accuracy (absolute error) were performed. Changes in performance were examined among children in the upper and lower quartiles of the pretest throwing accuracy scores. ER training participants showed greater gains in movement form and accuracy, and performed throwing more effectively with a concurrent secondary cognitive task. Movement form improved among girls, while throwing accuracy improved among children with low ability. Reduced performance errors in FMS training resulted in greater learning than a program that did not restrict errors. Reduced cognitive processing costs (effective dual-task performance) associated with such approach suggest its potential benefits for children with developmental conditions. © 2011 John Wiley & Sons A/S.

Cost of Incremental Expansion of an Existing Family Medicine Residency Program.

PubMed

Ashkin, Evan A; Newton, Warren P; Toomey, Brian; Lingley, Ronald; Page, Cristen P

2017-07-01

Expanding residency training programs to address shortages in the primary care workforce is challenged by the present graduate medical education (GME) environment. The Medicare funding cap on new GME positions and reductions in the Health Resources and Services Administration (HRSA) Teaching Health Center (THC) GME program require innovative solutions to support primary care residency expansion. Sparse literature exists to assist in predicting the actual cost of incremental expansion of a family medicine residency program without federal or state GME support. In 2011 a collaboration to develop a community health center (CHC) academic medical partnership (CHAMP), was formed and created a THC as a training site for expansion of an existing family medicine residency program. The cost of expansion was a critical factor as no Federal GME funding or HRSA THC GME program support was available. Initial start-up costs were supported by a federal grant and local foundations. Careful financial analysis of the expansion has provided actual costs per resident of the incremental expansion of the residencyRESULTS: The CHAMP created a new THC and expanded the residency from eight to ten residents per year. The cost of expansion was approximately $72,000 per resident per year. The cost of incremental expansion of our residency program in the CHAMP model was more than 50% less than that of the recently reported cost of training in the HRSA THC GME program.

Comparing the Value of Nonprofit Hospitals’ Tax Exemption to Their Community Benefits

PubMed Central

Herring, Bradley; Gaskin, Darrell; Zare, Hossein; Anderson, Gerard

2018-01-01

The tax-exempt status of nonprofit hospitals has received increased attention from policymakers interested in examining the value they provide instead of paying taxes. We use 2012 data from the Internal Revenue Service (IRS) Form 990, Centers for Medicare and Medicaid Services (CMS) Hospital Cost Reports, and American Hospital Association’s (AHA) Annual Survey to compare the value of community benefits with the tax exemption. We contrast nonprofit’s total community benefits to what for-profits provide and distinguish between charity and other community benefits. We find that the value of the tax exemption averages 5.9% of total expenses, while total community benefits average 7.6% of expenses, incremental nonprofit community benefits beyond those provided by for-profits average 5.7% of expenses, and incremental charity alone average 1.7% of expenses. The incremental community benefit exceeds the tax exemption for only 62% of nonprofits. Policymakers should be aware that the tax exemption is a rather blunt instrument, with many nonprofits benefiting greatly from it while providing relatively few community benefits. PMID:29436247

Incremental Validity of the Durand Adaptive Psychopathic Traits Questionnaire Above Self-Report Psychopathy Measures in Community Samples.

PubMed

Durand, Guillaume

2018-05-03

Although highly debated, the notion of the existence of an adaptive side to psychopathy is supported by some researchers. Currently, 2 instruments assessing psychopathic traits include an adaptive component, which might not cover the full spectrum of adaptive psychopathic traits. The Durand Adaptive Psychopathic Traits Questionnaire (DAPTQ; Durand, 2017 ) is a 41-item self-reported instrument assessing adaptive traits known to correlate with the psychopathic personality. In this study, I investigated in 2 samples (N = 263 and N = 262) the incremental validity of the DAPTQ over the Psychopathic Personality Inventory-Short Form (PPI-SF) and the Triarchic Psychopathy Measure (TriPM) using multiple criterion measures. Results showed that the DAPTQ significantly increased the predictive validity over the PPI-SF on 5 factors of the HEXACO. Additionally, the DAPTQ provided incremental validity over both the PPI-SF and the TriPM on measures of communication adaptability, perceived stress, and trait anxiety. Overall, these results support the validity of the DAPTQ in community samples. Directions for future studies to further validate the DAPTQ are discussed.

Incremental validity of the MMPI-2-RF over-reporting scales and RBS in assessing the veracity of memory complaints.

PubMed

Gervais, Roger O; Ben-Porath, Yossef S; Wygant, Dustin B; Sellbom, Martin

2010-06-01

The Response Bias Scale (RBS) has been found to be a better predictor of over-reported memory complaints than Minnesota Multiphasic Personality Inventory-2 (MMPI-2) F, Back Infrequency (Fb), Infrequency-Psychopathology (Fp), and FBS scales. The MMPI-2-Restructured Form (RF) validity scales were designed to meet or exceed the sensitivity of their MMPI-2 counterparts to symptom over-reporting. This study examined the incremental validity of MMPI-2-RF validity scales and RBS in assessing memory complaints. The MMPI-2-RF over-reporting validity scales were more strongly associated with mean Memory Complaints Inventory scores than their MMPI-2 counterparts (d = 0.22 to 0.49). RBS showed the strongest relationship with memory complaints. Regression analyses demonstrated the incremental validity of the MMPI-2-RF Infrequent Responses, Infrequent Psychopathology Responses, Infrequent Somatic Responses, and FBS-r scales relative to MMPI-2 F, Fp, and FBS in predicting memory complaints. This is consistent with the development objectives of the MMPI-2-RF validity scales as more efficient and sensitive measures of symptom over-reporting.

Variational formulation for dissipative continua and an incremental J-integral

NASA Astrophysics Data System (ADS)

Rahaman, Md. Masiur; Dhas, Bensingh; Roy, D.; Reddy, J. N.

2018-01-01

Our aim is to rationally formulate a proper variational principle for dissipative (viscoplastic) solids in the presence of inertia forces. As a first step, a consistent linearization of the governing nonlinear partial differential equations (PDEs) is carried out. An additional set of complementary (adjoint) equations is then formed to recover an underlying variational structure for the augmented system of linearized balance laws. This makes it possible to introduce an incremental Lagrangian such that the linearized PDEs, including the complementary equations, become the Euler-Lagrange equations. Continuous groups of symmetries of the linearized PDEs are computed and an analysis is undertaken to identify the variational groups of symmetries of the linearized dissipative system. Application of Noether's theorem leads to the conservation laws (conserved currents) of motion corresponding to the variational symmetries. As a specific outcome, we exploit translational symmetries of the functional in the material space and recover, via Noether's theorem, an incremental J-integral for viscoplastic solids in the presence of inertia forces. Numerical demonstrations are provided through a two-dimensional plane strain numerical simulation of a compact tension specimen of annealed mild steel under dynamic loading.

Superconducting analog-to-digital converter with a triple-junction reversible flip-flop bidirectional counter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, G.S.

1993-07-13

A high-performance superconducting analog-to-digital converter is described, comprising: a bidirectional binary counter having n stages of triple-junction reversible flip-flops connected together in a cascade arrangement from the least significant bit (LSB) to the most significant bit (MSB) where n is the number of bits of the digital output, each triple-junction reversible flip-flop including first, second and third shunted Josephson tunnel junctions and a superconducting inductor connected in a bridge circuit, the Josephson junctions and the inductor forming upper and lower portions of the flip-flop, each reversible flip-flop being a bistable logic circuit in which the direction of the circulating currentmore » determines the state of the circuit; and means for applying an analog input current to the bidirectional counter; wherein the bidirectional counter algebraically counts incremental changes in the analog input current, increasing the binary count for positive incremental changes in the analog current and decreasing the binary count for negative incremental changes in the current, and wherein the counter does not require a gate bias, thus minimizing power dissipation.« less

Image Fluctuations in LED Electromechanical 3D-Display

NASA Astrophysics Data System (ADS)

Klyuev, Alexey V.; Yakimov, Arkady V.

Fluctuations in parameters of light-emitting diode (LED) electromechanical 3D-display are investigated. It is shown, that there are two types of fluctuations in the rotating 3D-display. The first one is caused by a small increment in the rotation angle, which has a tendency to the increase. That occurs in the form of the “drift” without periodic changes of the angle. The second one is the change in small linear increments of the angle, which occurs as undamped harmonic oscillations with constant amplitude. This shows the stability of the investigated steady state because there is no tendency to increase the amplitude of the considered parameter regime. In conclusion we give some recommendations how to improve synchronization of the system.

Flight test evaluation of a method to determine the level flight performance of a propeller-driven aircraft

NASA Technical Reports Server (NTRS)

Bridges, P. G.; Cross, E. J., Jr.; Boatwright, D. W.

1977-01-01

The overall drag of the aircraft is expressed in terms of the measured increment of power required to overcome a corresponding known increment of drag, which is generated by a towed drogue. The simplest form of the governing equations, D = delta D SHP/delta SHP, is such that all of the parameters on the right side of the equation can be measured in flight. An evaluation of the governing equations has been performed using data generated by flight test of a Beechcraft T-34B. The simplicity of this technique and its proven applicability to sailplanes and small aircraft is well known. However, the method fails to account for airframe-propulsion system.

Analysis of heart rate deflection points to predict the anaerobic threshold by a computerized method.

PubMed

Marques-Neto, Silvio R; Maior, Alex S; Maranhão Neto, Geraldo A; Santos, Edil L

2012-07-01

Many studies have used the heart rate deflection points (HRDPs) during incremental exercise tests, because of their strong correlation with the anaerobic threshold. The aim of this study was to evaluate the profile of the HRDPs identified by a computerized method and compare them with ventilatory and lactate thresholds. Twenty-four professional soccer players (age, 22 ± 5 years; body mass, 74 ± 7 kg; height 177 ± 7 cm) volunteered for the study. The subjects completed a Bruce-protocol incremental treadmill exercise test to volitional fatigue. Heart rate (HR) and alveolar gas exchange were recorded continuously at ≥1 Hz during exercise testing. Subsequently, the time course of the HR was fit by a computer algorithm, and a set of lines yielding the lowest pooled residual sum of squares was chosen as the best fit. This procedure defined 2 HRDPs (HRDP1 and HRDP2). The HR break points averaged 43.9 ± 5.9 and 89.7 ± 7.5% of the VO2peak. The HRDP1 showed a poor correlation with ventilatory threshold (VT; r = 0.50), but HRDP2 was highly correlated to the respiratory compensation (RC) point (r = 0.98). Neither HRDP1 nor HRDP2 was correlated with LT1 (at VO2 = 2.26 ± 0.72 L·min(-1); r = 0.26) or LT2 (2.79 ± 0.59 L·min(-1); r = 0.49), respectively. LT1 and LT2 also were not well correlated with VT (2.93 ± 0.68 L·min(-1); r = 0.20) or RC (3.82 ± 0.60 L·min(-1); r = 0.58), respectively. Although the HR deflection points were not correlated to LT, HRDP2 could be identified in all the subjects and was strongly correlated with RC, consistent with a relationship to cardiorespiratory fatigue and endurance performance.

Sex differences in antinociceptive response to Δ-9-tetrahydrocannabinol and CP 55,940 in the mouse formalin test.

PubMed

LaFleur, Rebecca A; Wilson, Ronald P; Morgan, Daniel J; Henderson-Redmond, Angela N

2018-04-11

Cannabinoids have shown promise for the treatment of intractable pain states and may represent an alternative pharmacotherapy for pain management. A growing body of clinical evidence suggests a role for sex in pain perception and in cannabinoid response. We examined cannabinoid sensitivity and tolerance in male and female mice expressing a desensitization-resistant form (S426A/S430A) of the cannabinoid type 1 receptor (CB1R). Mice were assessed for acute and inflammatory nociceptive behaviors in the formalin test following pretreatment with either vehicle or mixed CB1R/CB2R agonists, Δ-9-tetrahydrocannabinol ([INCREMENT]-THC) (1-6 mg/kg) or CP 55,940 (0.06-0.2 mg/kg). Tolerance to the effects of 6 mg/kg [INCREMENT]-THC or 0.1 mg/kg CP 55,940 was examined by the formalin test following chronic daily dosing. Female mice showed decreased sensitivity to the effects of [INCREMENT]-THC and CP 55,940 compared with male mice. The S426A/S430A mutation increased the attenuation of nociceptive behaviors for both agonists in both sexes. Female mice displayed delayed tolerance to [INCREMENT]-THC compared with male mice, whereas the S426A/S430A mutation conferred a delay in tolerance to [INCREMENT]-THC in both sexes. Male S426A/S430A mutant mice also display resistance to tolerance to CP 55,940 compared with wild-type controls. This study demonstrates sex and genotype differences in response for two different cannabinoid agonists. The results underscore the importance of including both male and female mice in preclinical studies of pain and cannabinoid pharmacology.

Comparison of lifetime incremental cost:utility ratios of surgery relative to failed medical management for the treatment of hip, knee and spine osteoarthritis modelled using 2-year postsurgical values

PubMed Central

Tso, Peggy; Walker, Kevin; Mahomed, Nizar; Coyte, Peter C.; Rampersaud, Y. Raja

2012-01-01

Background Demand for surgery to treat osteoarthritis (OA) of the hip, knee and spine has risen dramatically. Whereas total hip (THA) and total knee arthroplasty (TKA) have been widely accepted as cost-effective, spine surgeries (decompression, decompression with fusion) to treat degenerative conditions remain underfunded compared with other surgeries. Methods An incremental cost–utility analysis comparing decompression and decompression with fusion to THA and TKA, from the perspective of the provincial health insurance system, was based on an observational matched-cohort study of prospectively collected outcomes and retrospectively collected costs. Patient outcomes were measured using short-form (SF)-36 surveys over a 2-year follow-up period. Utility was modelled over the lifetime, and quality-adjusted life years (QALYs) were determined. We calculated the incremental cost per QALY gained by estimating mean incremental lifetime costs and QALYs of surgery compared with medical management of each diagnosis group after discounting costs and QALYs at 3%. Sensitivity analyses were also conducted. Results The lifetime incremental cost:utility ratios (ICURs) discounted at 3% were $5321 per QALY for THA, $11 275 per QALY for TKA, $2307 per QALY for spinal decompression and $7153 per QALY for spinal decompression with fusion. The sensitivity analyses did not alter the ranking of the lifetime ICURs. Conclusion In appropriately selected patients with leg-dominant symptoms secondary to focal lumbar spinal stenosis who have failed medical management, the lifetime ICUR for surgical treatment of lumbar spinal stenosis is similar to those of THA and TKA for the treatment of OA. PMID:22630061

The Nonproliferation Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

RAJEN,GAURAV; BIRINGER,KENT L.

2000-07-28

The aim of this paper is to understand the numerous nuclear-related agreements that involve India and Pakistan, and in so doing identify starting points for future confidence-creating and confidence-building projects. Existing nuclear-related agreements provide a framework under which various projects can be proposed that foster greater nuclear transparency and cooperation in South Asia. The basic assumptions and arguments underlying this paper can be summarized as follows: (1) Increased nuclear transparency between India and Pakistan is a worthwhile objective, as it will lead to the irreversibility of extant nuclear agreements, the prospects of future agreements; and the balance of opacity andmore » transparency required for stability in times of crises; (2) Given the current state of Indian and Pakistani relations, incremental progress in increased nuclear transparency is the most likely future outcome; and (3) Incremental progress can be achieved by enhancing the information exchange required by existing nuclear-related agreements.« less

VIEWCACHE: An incremental pointer-based access method for autonomous interoperable databases

NASA Technical Reports Server (NTRS)

Roussopoulos, N.; Sellis, Timos

1993-01-01

One of the biggest problems facing NASA today is to provide scientists efficient access to a large number of distributed databases. Our pointer-based incremental data base access method, VIEWCACHE, provides such an interface for accessing distributed datasets and directories. VIEWCACHE allows database browsing and search performing inter-database cross-referencing with no actual data movement between database sites. This organization and processing is especially suitable for managing Astrophysics databases which are physically distributed all over the world. Once the search is complete, the set of collected pointers pointing to the desired data are cached. VIEWCACHE includes spatial access methods for accessing image datasets, which provide much easier query formulation by referring directly to the image and very efficient search for objects contained within a two-dimensional window. We will develop and optimize a VIEWCACHE External Gateway Access to database management systems to facilitate database search.

VIEWCACHE: An incremental pointer-based access method for autonomous interoperable databases

NASA Technical Reports Server (NTRS)

Roussopoulos, N.; Sellis, Timos

1992-01-01

One of biggest problems facing NASA today is to provide scientists efficient access to a large number of distributed databases. Our pointer-based incremental database access method, VIEWCACHE, provides such an interface for accessing distributed data sets and directories. VIEWCACHE allows database browsing and search performing inter-database cross-referencing with no actual data movement between database sites. This organization and processing is especially suitable for managing Astrophysics databases which are physically distributed all over the world. Once the search is complete, the set of collected pointers pointing to the desired data are cached. VIEWCACHE includes spatial access methods for accessing image data sets, which provide much easier query formulation by referring directly to the image and very efficient search for objects contained within a two-dimensional window. We will develop and optimize a VIEWCACHE External Gateway Access to database management systems to facilitate distributed database search.

Back to the Future: Consistency-Based Trajectory Tracking

NASA Technical Reports Server (NTRS)

Kurien, James; Nayak, P. Pandurand; Norvig, Peter (Technical Monitor)

2000-01-01

Given a model of a physical process and a sequence of commands and observations received over time, the task of an autonomous controller is to determine the likely states of the process and the actions required to move the process to a desired configuration. We introduce a representation and algorithms for incrementally generating approximate belief states for a restricted but relevant class of partially observable Markov decision processes with very large state spaces. The algorithm presented incrementally generates, rather than revises, an approximate belief state at any point by abstracting and summarizing segments of the likely trajectories of the process. This enables applications to efficiently maintain a partial belief state when it remains consistent with observations and revisit past assumptions about the process' evolution when the belief state is ruled out. The system presented has been implemented and results on examples from the domain of spacecraft control are presented.

The Cost-Effectiveness of Integrating HIV Counseling and Testing into Primary Health Care in the Ukraine.

PubMed

Johns, Benjamin; Doroshenko, Olena; Tarantino, Lisa; Cowley, Peter

2017-03-01

We estimate the number of HIV cases diagnosed, costs, and cost per HIV case detected associated with integrating HIV counseling and testing (HCT) into primary health care facilities in Ukraine. The study uses a difference-in-difference design with four districts implementing the intervention compared to 20 districts where HCT were offered only at specialized HIV clinics. There was a 2.01 (95 % CI: 1.12-3.61) times increase in the number of HIV cases detected per capita in intervention districts compared to other districts. The incremental cost of the intervention was $21,017 and the incremental cost per HIV case detected was $369. The average cost per HIV case detected before the intervention was $558. Engaging primary health care facilities to provide HCT is likely desirable from an efficiency point-of-view. However, the affordability of the intervention needs to be assessed because expansion will require additional investment.

Effect of oxcarbazepine on sleep architecture.

PubMed

Ayala-Guerrero, Fructuoso; Mexicano, Graciela; González, Valentín; Hernandez, Mario

2009-07-01

The most common side effects following administration of antiepileptic drugs involve alterations in sleep architecture and varying degrees of daytime sleepiness. Oxcarbazepine is a drug that is approved as monotherapy for the treatment of partial seizures and generalized tonic-clonic seizures. However, there is no information about its effects on sleep pattern organization; therefore, the objective of this work was to analyze such effects. Animals (Wistar rats) exhibited three different behavioral and electrophysiological states of vigilance: wakefulness, slow wave sleep (SWS), and rapid eye movement (REM) sleep. Oral treatment with oxcarbazepine (100 mg/kg) produced an increment in total sleep time throughout the recording period. This increment involved both SWS and REM sleep. Mean duration of the REM sleep phase was not affected. In contrast, the frequency of this sleep phase increased significantly across the 10-hour period. REM sleep latency shortened significantly. Results obtained in this work indicate that oxcarbazepine's acute effects point to hypnotic properties.

Cure therapeutics and strategic prevention: raising the bar for mental health research.

PubMed

Insel, T R; Scolnick, E M

2006-01-01

Mental disorders cause more disability than any other class of medical illness in Americans between ages 15 and 44 years. The suicide rate is higher than the annual mortality from homicide, AIDS, and most forms of cancer. In contrast to nearly all communicable and most non-communicable diseases, there is little evidence that the morbidity and mortality from mental disorders have changed in the past several decades. Mental health advocates, including psychiatric researchers, have pointed to stigma as one of the reasons for the lack of progress with mental illnesses relative to other medical illnesses. This review considers how the expectations and goals of the research community have contributed to this relative lack of progress. In contrast to researchers in cancer and heart disease who have sought cures and preventions, biological psychiatrists in both academia and industry have set their sights on incremental and marketable advances, such as drugs with fewer adverse effects. This essay argues for approaches that can lead to cures and strategies for prevention of schizophrenia and mood disorders.

Testing of stiffening ribs formed by incremental forming in thin-walled aircraft structures made of 2024-T3 ALCLAD aluminium alloy

NASA Astrophysics Data System (ADS)

Kubit, Andrzej; Wydrzynski, Dawid; Bucior, Magdalena; Krasowski, Bogdan

2018-05-01

This paper presents the results of experimental tests on the fabrication of longitudinal stiffening ribs in 2024-T3 ALCLAD aluminum alloy sheet, which is widely used in the aircraft structures. The problem presented in this paper concerns the concept of rib-stiffening of the structure of aircraft skin. The ribs are intended to stiffen integral thin-walled structure. Different shapes and different parameters of the forming process were studied. The rib-stiffened samples of various depths of the ribs were tested experimentally in the buckling test.

Hot forming of composite prepreg: Numerical analyses

NASA Astrophysics Data System (ADS)

Guzman-Maldonado, Eduardo; Hamila, Nahiène; Boisse, Philippe; El Azzouzi, Khalid; Tardif, Xavier; Moro, Tanguy; Chatel, Sylvain; Fideu, Paulin

2017-10-01

The work presented here is part of the "FORBANS" project about the Hot Drape Forming (HDF) process consisting of unidirectional prepregs laminates. To ensure a fine comprehension of this process a combination strategy between experiment and numerical analysis is adopted. This paper is focused on the numerical analysis using the finite element method (FEM) with a hyperelastic constitutive law. Each prepreg layer is modelled by shell elements. These elements consider the tension, in-plane shear and bending behaviour of the ply at different temperatures. The contact/friction during the forming process is taken into account using forward increment Lagrange multipliers.

PSF Rotation with Changing Defocus and Applications to 3D Imaging for Space Situational Awareness

NASA Astrophysics Data System (ADS)

Prasad, S.; Kumar, R.

2013-09-01

For a clear, well corrected imaging aperture in space, the point-spread function (PSF) in its Gaussian image plane has the conventional, diffraction-limited, tightly focused Airy form. Away from that plane, the PSF broadens rapidly, however, resulting in a loss of sensitivity and transverse resolution that makes such a traditional best-optics approach untenable for rapid 3D image acquisition. One must scan in focus to maintain high sensitivity and resolution as one acquires image data, slice by slice, from a 3D volume with reduced efficiency. In this paper we describe a computational-imaging approach to overcome this limitation, one that uses pupil-phase engineering to fashion a PSF that, although not as tight as the Airy spot, maintains its shape and size while rotating uniformly with changing defocus over many waves of defocus phase at the pupil edge. As one of us has shown recently [1], the subdivision of a circular pupil aperture into M Fresnel zones, with the mth zone having an outer radius proportional to m and impressing a spiral phase profile of form m? on the light wave, where ? is the azimuthal angle coordinate measured from a fixed x axis (the dislocation line), yields a PSF that rotates with defocus while keeping its shape and size. Physically speaking, a nonzero defocus of a point source means a quadratic optical phase in the pupil that, because of the square-root dependence of the zone radius on the zone number, increases on average by the same amount from one zone to the next. This uniformly incrementing phase yields, in effect, a rotation of the dislocation line, and thus a rotated PSF. Since the zone-to-zone phase increment depends linearly on defocus to first order, the PSF rotates uniformly with changing defocus. For an M-zone pupil, a complete rotation of the PSF occurs when the defocus-induced phase at the pupil edge changes by M waves. Our recent simulations of reconstructions from image data for 3D image scenes comprised of point sources at different focal depths have shown remarkable robustness of our rotating-PSF approach to achieve good transverse and longitudinal resolution even for moderate SNR. Additionally, the work seeks to clarify an important theoretical issue about 3D imaging, namely the detailed nature of the interplay between transverse and longitudinal resolutions, including 3D generalizations of the space-bandwidth product (SBP) and its dependence on image noise. An underlying transport equation, which we shall derive and analyze, describes the trade-off between the transverse and longitudinal blur processes in a manner analogous to the diffractive spreading of a light beam that is transversely confined. This work has immediate applications for space-based surveillance, particularly for 3D mapping and tracking of space debris flying in the vicinity of important AF space assets. Working with a well corrected conventional imager, our 3D computational imager can acquire with high sensitivity and speed an extended focal volume in which individual objects of interest can be subsequently probed and imaged with high resolution over smaller 2D field segments. [1] S. Prasad, Rotating Point Spread Function by Pupil Phase Engineering, Opt. Lett., vol. 38, pp. 585-587 (2013)

International Space Station Payload Operations Integration

NASA Technical Reports Server (NTRS)

Fanske, Elizabeth Anne

2011-01-01

The Payload Operations Integrator (POINT) plays an integral part in the Certification of Flight Readiness process for the Mission Operations Laboratory and the Payload Operations Integration Function that supports International Space Station Payload operations. The POINTs operate in support of the POIF Payload Operations Manager to bring together and integrate the Certification of Flight Readiness inputs from various MOL teams through maintaining an open work tracking log. The POINTs create monthly metrics for current and future payloads that the Payload Operations Integration Function supports. With these tools, the POINTs assemble the Certification of Flight Readiness package before a given flight, stating that the Mission Operations Laboratory is prepared to support it. I have prepared metrics for Increment 29/30, maintained the Open Work Tracking Logs for Flights ULF6 (STS-134) and ULF7 (STS-135), and submitted the Mission Operations Laboratory Certification of Flight Readiness package for Flight 44P to the Mission Operations Directorate (MOD/OZ).

Incremental Centrality Algorithms for Dynamic Network Analysis

DTIC Science & Technology

2013-08-01

encouragement he gave me to complete my degree. Last but not least, I would like to thank CASOS members for insightful discussions and feedback they gave me at...Systems ( CASOS ) under the Institute for Software Research within the School of Computer Science (SCS) at Carnegie Mellon University (CMU). Financial...discusses several ways of generalizing betweenness 23 centrality including scaling of values with respect to length, inclusion of end-points in the

Barratt with MSG in Kibo

NASA Image and Video Library

2009-04-29

ISS019-E-012391 (29 April 2009) --- Astronaut Michael Barratt, Expedition 19/20 flight engineer, activates the Microgravity Science Glovebox (MSG) from its A31p laptop, initiates and conducts a session, the first of Increment 19, with the experiment Smoke Point In Co-flow Experiment (SPICE), performed in the MSG and controlled by its A31p with SPICE micro-drives in the Kibo laboratory of the International Space Station.

Martingales, detrending data, and the efficient market hypothesis

NASA Astrophysics Data System (ADS)

McCauley, Joseph L.; Bassler, Kevin E.; Gunaratne, Gemunu H.

2008-01-01

We discuss martingales, detrending data, and the efficient market hypothesis (EMH) for stochastic processes x( t) with arbitrary diffusion coefficients D( x, t). Beginning with x-independent drift coefficients R( t) we show that martingale stochastic processes generate uncorrelated, generally non-stationary increments. Generally, a test for a martingale is therefore a test for uncorrelated increments. A detrended process with an x-dependent drift coefficient is generally not a martingale, and so we extend our analysis to include the class of ( x, t)-dependent drift coefficients of interest in finance. We explain why martingales look Markovian at the level of both simple averages and 2-point correlations. And while a Markovian market has no memory to exploit and presumably cannot be beaten systematically, it has never been shown that martingale memory cannot be exploited in 3-point or higher correlations to beat the market. We generalize our Markov scaling solutions presented earlier, and also generalize the martingale formulation of the EMH to include ( x, t)-dependent drift in log returns. We also use the analysis of this paper to correct a misstatement of the ‘fair game’ condition in terms of serial correlations in Fama's paper on the EMH. We end with a discussion of Levy's characterization of Brownian motion and prove that an arbitrary martingale is topologically inequivalent to a Wiener process.

[Uncertainty analysis of ecological risk assessment caused by heavy-metals deposition from MSWI emission].

PubMed

Liao, Zhi-Heng; Sun, Jia-Ren; Wu, Dui; Fan, Shao-Jia; Ren, Ming-Zhong; Lü, Jia-Yang

2014-06-01

The CALPUFF model was applied to simulate the ground-level atmospheric concentrations of Pb and Cd from municipal solid waste incineration (MSWI) plants, and the soil concentration model was used to estimate soil concentration increments after atmospheric deposition based on Monte Carlo simulation, then ecological risk assessment was conducted by the potential ecological risk index method. The results showed that the largest atmospheric concentrations of Pb and Cd were 5.59 x 109-3) microg x m(-3) and 5.57 x 10(-4) microg x m(-3), respectively, while the maxima of soil concentration incremental medium of Pb and Cd were 2.26 mg x kg(-1) and 0.21 mg x kg(-1), respectively; High risk areas were located next to the incinerators, Cd contributed the most to the ecological risk, and Pb was basically free of pollution risk; Higher ecological hazard level was predicted at the most polluted point in urban areas with a 55.30% probability, while in rural areas, the most polluted point was assessed to moderate ecological hazard level with a 72.92% probability. In addition, sensitivity analysis of calculation parameters in the soil concentration model was conducted, which showed the simulated results of urban and rural area were most sensitive to soil mix depth and dry deposition rate, respectively.

Humanlike agents with posture planning ability

NASA Astrophysics Data System (ADS)

Jung, Moon R.; Badler, Norman I.

1992-11-01

Human body models are geometric structures which may be ultimately controlled by kinematically manipulating their joints, but for animation, it is desirable to control them in terms of task-level goals. We address a fundamental problem in achieving task-level postural goals: controlling massively redundant degrees of freedom. We reduce the degrees of freedom by introducing significant control points and vectors, e.g., pelvis forward vector, palm up vector, and torso up vector, etc. This reduced set of parameters are used to enumerate primitive motions and motion dependencies among them, and thus to select from a small set of alternative postures (e.g., bend versus squat to lower shoulder height). A plan for a given goal is found by incrementally constructing a goal/constraint set based on the given goal, motion dependencies, collision avoidance requirements, and discovered failures. Global postures satisfying a given goal/constraint set are determined with the help of incremental mental simulation which uses a robust inverse kinematics algorithm. The contributions of the present work are: (1) There is no need to specify beforehand the final goal configuration, which is unrealistic for the human body, and (2) the degrees of freedom problem becomes easier by representing body configurations in terms of `lumped' control parameters, that is, control points and vectors.

Human-like agents with posture planning ability

NASA Technical Reports Server (NTRS)

Jung, Moon R.; Badler, Norman

1992-01-01

Human body models are geometric structures which may be ultimately controlled by kinematically manipulating their joints, but for animation, it is desirable to control them in terms of task-level goals. We address a fundamental problem in achieving task-level postural goals: controlling massively redundant degrees of freedom. We reduce the degrees of freedom by introducing significant control points and vectors, e.g., pelvis forward vector, palm up vector, and torso up vector, etc. This reduced set of parameters are used to enumerate primitive motions and motion dependencies among them, and thus to select from a small set of alternative postures (e.g., bend vs. squat to lower shoulder height). A plan for a given goal is found by incrementally constructing a goal/constraint set based on the given goal, motion dependencies, collision avoidance requirements, and discovered failures. Global postures satisfying a given goal/constraint set are determined with the help of incremental mental simulation which uses a robust inverse kinematics algorithm. The contributions of the present work are: (1) There is no need to specify beforehand the final goal configuration, which is unrealistic for the human body, and (2) the degrees of freedom problem becomes easier by representing body configurations in terms of 'lumped' control parameters, that is, control points and vectors.

Peritraumatic tonic immobility is associated with PTSD symptom severity in Brazilian police officers: a prospective study.

PubMed

Maia, Deborah B; Nóbrega, Augusta; Marques-Portella, Carla; Mendlowicz, Mauro V; Volchan, Eliane; Coutinho, Evandro S; Figueira, Ivan

2015-01-01

Peritraumatic reactions feature prominently among the main predictors for development of posttraumatic stress disorder (PTSD). Peritraumatic tonic immobility (PTI), a less investigated but equally important type of peritraumatic response, has been recently attracting the attention of researchers and clinicians for its close association with traumatic reactions and PTSD. Our objective was to investigate the role of PTI, peritraumatic panic, and dissociation as predictors of PTSD symptoms in a cohort of police recruits (n=132). Participants were asked to complete the following questionnaires during academy training and after the first year of work: Posttraumatic Stress Disorder Checklist - Civilian Version (PCL-C), Physical Reactions Subscale (PRS), Peritraumatic Dissociative Experiences Questionnaire (PDEQ), Tonic Immobility Scale (TIS), and Critical Incident History Questionnaire. Employing a zero-inflated negative binomial regression model, we found that each additional point in the TIS was associated with a 9% increment in PCL-C mean scores (RM = 1.09), whereas for PRS, the increment was 7% (RM = 1.07). As the severity of peritraumatic dissociation increased one point in the PDEQ, the chance of having at least one symptom in the PCL-C increased 22% (OR = 1.22). Our findings highlight the need to expand investigation on the incidence and impact of PTI on the mental health of police officers.

The G-Axis: a growth vector for the mandible.

PubMed

Braun, Stanley; Kittleson, Russell; Kim, Kyonghwan

2004-06-01

On the basis of the G-point, defined as the center of the largest circle that is tangent to the internal inferior, anterior, and lingual surfaces of the mandibular symphysis in the sagittal view, a growth axis and its direction are described for each gender from age six to 19.25 years. Incremental growth along the G-Axis, defined by Sella-G-point, is described by regression formulas with correlation coefficients of 0.673 for female subjects and 0.749 for male subjects. The vector (direction) of the growth axis, defined by the angle alpha ((G-Axis)-(S-N)) does not materially alter in the age range studied. At age six in female subjects the angle alpha is 67.16 degrees +/- 3.03 degrees and at age 19.25 it is 66.87 degrees +/- 3.03 degrees, whereas in male subjects it is 66.12 degrees +/- 4.00 degrees and 67.93 degrees +/- 4.00 degrees, respectively. These changes and gender differences are not clinically significant. The data is based on 444 serial lateral cephalograms of 24 female subjects and 24 male subjects. The G-Axis incremental growth change and its vector offer an improved means of quantifying complex mandibular growth in the sagittal plane by using cephalometric measurements relative to and correlated with other craniofacial structures.

AUTOMATIC CALIBRATING SYSTEM FOR PRESSURE TRANSDUCERS

DOEpatents

Amonette, E.L.; Rodgers, G.W.

1958-01-01

An automatic system for calibrating a number of pressure transducers is described. The disclosed embodiment of the invention uses a mercurial manometer to measure the air pressure applied to the transducer. A servo system follows the top of the mercury column as the pressure is changed and operates an analog- to-digital converter This converter furnishes electrical pulses, each representing an increment of pressure change, to a reversible counterThe transducer furnishes a signal at each calibration point, causing an electric typewriter and a card-punch machine to record the pressure at the instant as indicated by the counter. Another counter keeps track of the calibration points so that a number identifying each point is recorded with the corresponding pressure. A special relay control system controls the pressure trend and programs the sequential calibration of several transducers.

An Experimental Study of Incremental Surface Loading of an Elastic Plate: Application to Volcano Tectonics

NASA Technical Reports Server (NTRS)

Williams, K. K.; Zuber, M. T.

1995-01-01

Models of surface fractures due to volcanic loading an elastic plate are commonly used to constrain thickness of planetary lithospheres, but discrepancies exist in predictions of the style of initial failure and in the nature of subsequent fracture evolution. In this study, we perform an experiment to determine the mode of initial failure due to the incremental addition of a conical load to the surface of an elastic plate and compare the location of initial failure with that predicted by elastic theory. In all experiments, the mode of initial failure was tension cracking at the surface of the plate, with cracks oriented circumferential to the load. The cracks nucleated at a distance from load center that corresponds the maximum radial stress predicted by analytical solutions, so a tensile failure criterion is appropriate for predictions of initial failure. With continued loading of the plate, migration of tensional cracks was observed. In the same azimuthal direction as the initial crack, subsequent cracks formed at a smaller radial distance than the initial crack. When forming in a different azimuthal direction, the subsequent cracks formed at a distance greater than the radial distance of the initial crack. The observed fracture pattern may explain the distribution of extensional structures in annular bands around many large scale, circular volcanic features.

SAMS Acceleration Measurements on Mir From January to May 1997 (NASA Increment 4)

NASA Technical Reports Server (NTRS)

DeLombard, Richard

1998-01-01

During NASA Increment 4 (January to May 1997), about 5 gigabytes of acceleration data were collected by the Space Acceleration Measurements System (SAMS) onboard the Russian Space Station, Mir. The data were recorded on 28 optical disks which were returned to Earth on STS-84. During this increment, SAMS data were collected in the Priroda module to support the Mir Structural Dynamics Experiment (MiSDE), the Binary Colloidal Alloy Tests (BCAT), Angular Liquid Bridge (ALB), Candle Flames in Microgravity (CFM), Diffusion Controlled Apparatus Module (DCAM), Enhanced Dynamic Load Sensors (EDLS), Forced Flow Flame Spreading Test (FFFT), Liquid Metal Diffusion (LMD), Protein Crystal Growth in Dewar (PCG/Dewar), Queen's University Experiments in Liquid Diffusion (QUELD), and Technical Evaluation of MIM (TEM). This report points out some of the salient features of the microgravity environment to which these experiments were exposed. Also documented are mission events of interest such as the docked phase of STS-84 operations, a Progress engine burn, Soyuz vehicle docking and undocking, and Progress vehicle docking. This report presents an overview of the SAMS acceleration measurements recorded by 10 Hz and 100 Hz sensor heads. The analyses included herein complement those presented in previous summary reports prepared by the Principal Investigator Microgravity Services (PIMS) group.

Control strategy of grid-connected photovoltaic generation system based on GMPPT method

NASA Astrophysics Data System (ADS)

Wang, Zhongfeng; Zhang, Xuyang; Hu, Bo; Liu, Jun; Li, Ligang; Gu, Yongqiang; Zhou, Bowen

2018-02-01

There are multiple local maximum power points when photovoltaic (PV) array runs under partial shading condition (PSC).However, the traditional maximum power point tracking (MPPT) algorithm might be easily trapped in local maximum power points (MPPs) and cannot find the global maximum power point (GMPP). To solve such problem, a global maximum power point tracking method (GMPPT) is improved, combined with traditional MPPT method and particle swarm optimization (PSO) algorithm. Under different operating conditions of PV cells, different tracking algorithms are used. When the environment changes, the improved PSO algorithm is adopted to realize the global optimal search, and the variable step incremental conductance (INC) method is adopted to achieve MPPT in optimal local location. Based on the simulation model of the PV grid system built in Matlab/Simulink, comparative analysis of the tracking effect of MPPT by the proposed control algorithm and the traditional MPPT method under the uniform solar condition and PSC, validate the correctness, feasibility and effectiveness of the proposed control strategy.

Rotational-path decomposition based recursive planning for spacecraft attitude reorientation

NASA Astrophysics Data System (ADS)

Xu, Rui; Wang, Hui; Xu, Wenming; Cui, Pingyuan; Zhu, Shengying

2018-02-01

The spacecraft reorientation is a common task in many space missions. With multiple pointing constraints, it is greatly difficult to solve the constrained spacecraft reorientation planning problem. To deal with this problem, an efficient rotational-path decomposition based recursive planning (RDRP) method is proposed in this paper. The uniform pointing-constraint-ignored attitude rotation planning process is designed to solve all rotations without considering pointing constraints. Then the whole path is checked node by node. If any pointing constraint is violated, the nearest critical increment approach will be used to generate feasible alternative nodes in the process of rotational-path decomposition. As the planning path of each subdivision may still violate pointing constraints, multiple decomposition is needed and the reorientation planning is designed as a recursive manner. Simulation results demonstrate the effectiveness of the proposed method. The proposed method has been successfully applied in two SPARK microsatellites to solve onboard constrained attitude reorientation planning problem, which were developed by the Shanghai Engineering Center for Microsatellites and launched on 22 December 2016.

Fabrication and calibration of a piezoelectric nanocomposite paint

NASA Astrophysics Data System (ADS)

Osho, Samuel; Wu, Nan; Aramfard, Mohammad; Deng, Chuang; Ojo, Olanrewaju

2018-03-01

A new liquid form piezoelectric nanocomposite paint material is fabricated with possible applications as dynamic strain sensors and/or piezoelectric transducers. The applied coating is in the form of low-cost paint, which is flexible and bonds strongly on a metallic surface after drying out via the solvent-casting method. The nanocomposite is produced by an ultrasonic mixture of varying percentages of zinc oxide (ZnO) nanoparticle water dispersion, poly vinyl acetate glue (PVA) and carbon nanotubes (CNTs). ZnO nanoparticles are used as the piezoelectric sensing elements in a PVA matrix of the paint, while CNTs are introduced as robust bridge of ZnO particles enhancing the piezoelectricity and material properties. Transmission electron microscopy (TEM) images confirmed the linkages of ZnO nanoparticles in the composite by CNTs. Through piezoelectricity calibration, the optimum mixing ratio with the highest piezoelectricity is 78.1 wt% ZnO, 19.5 wt% PVA glue and 2.4 wt% multi-wall carbon nanotubes (MWCNTs). Through nanoindentation tests for the characterization of the mechanical properties of the nano-composite paint, it is found that Young’s modulus and hardness reached a threshold point in the increment in the addition of CNTs to the paint before showing signs of decline. Detailed analysis and explanation of the calibration results and physical phenomenon are provided. The stable paint material is ready to be applied on rough area of engineering structures as sensor and transducer.

Geophysical characterization of soil moisture spatial patterns in a tillage experiment

NASA Astrophysics Data System (ADS)

Martinez, G.; Vanderlinden, K.; Giráldez, J. V.; Muriel, J. L.

2009-04-01

Knowledge on the spatial soil moisture pattern can improve the characterisation of the hydrological response of either field-plots or small watersheds. Near-surface geophysical methods, such as electromagnetic induction (EMI), provide a means to map such patterns using non-invasive and non-destructive measurements of the soil apparent electrical conductivity (ECa. In this study ECa was measured using an EMI sensor and used to characterize spatially the hydrologic response of a cropped field to an intense shower. The study site is part of a long-term tillage experiment in Southern Spain in which Conventional Tillage (CT), Direct Drilling (DD) and Minimum Tillage (MT) are being evaluated since 1982. Soil ECa was measured before and after a rain event of 115 mm, near the soil surface and at deeper depth (ECas and ECad, respectively) using the EM38-DD EMI sensor. Simultaneously, elevation data were collected at each sampling point to generate a Digital Elevation Model (DEM). Soil moisture during the first survey was close to permanent wilting point and near field capacity during the second survey. For the first survey, both ECas and ECad, were higher in the CT and MT than in the DD plots. After the rain event, rill erosion appeared only in CT and MT plots were soil was uncovered, matching the drainage lines obtained from the DEM. Apparent electrical conductivity increased all over the field plot with higher increments in the DD plots. These plots showed the highest ECas and ECad values, in contrast to the spatial pattern found during the first sampling. Difference maps obtained from the two ECas and ECad samplings showed a clear difference between DD plots and CT and MT plots due to their distinct hydrologic response. Water infiltration was higher in the soil of the DD plots than in the MT and CT plots, as reflected by their ECad increment. Higher ECa increments were observed in the depressions of the terrain, where water and sediments accumulated. On the contrary, the most elevated places of the field showed lower ECa increments. When soil is wet topography dominates the hydrologic response of the field, while under drier conditions, hydraulic conductivity controls the soil water dynamics. These results show that when static soil properties, e.g. clay content, are spatially uniform, ECa can detect changes in dynamic properties like soil moisture content, characterizing their spatial pattern.

Endogenous overexpression of an active phosphorylated form of DNA polymerase β under oxidative stress in Trypanosoma cruzi.

PubMed

Rojas, Diego A; Urbina, Fabiola; Moreira-Ramos, Sandra; Castillo, Christian; Kemmerling, Ulrike; Lapier, Michel; Maya, Juan Diego; Solari, Aldo; Maldonado, Edio

2018-02-01

Trypanosoma cruzi is exposed during its life to exogenous and endogenous oxidative stress, leading to damage of several macromolecules such as DNA. There are many DNA repair pathways in the nucleus and mitochondria (kinetoplast), where specific protein complexes detect and eliminate damage to DNA. One group of these proteins is the DNA polymerases. In particular, Tc DNA polymerase β participates in kinetoplast DNA replication and repair. However, the mechanisms which control its expression under oxidative stress are still unknown. Here we describe the effect of oxidative stress on the expression and function of Tc DNA polymerase β To this end parasite cells (epimastigotes and trypomastigotes) were exposed to peroxide during short periods of time. Tc DNA polymerase β which was associated physically with kinetoplast DNA, showed increased protein levels in response to peroxide damage in both parasite forms analyzed. Two forms of DNA polymerase β were identified and overexpressed after peroxide treatment. One of them was phosphorylated and active in DNA synthesis after renaturation on polyacrylamide electrophoresis gel. This phosphorylated form showed 3-4-fold increase in both parasite forms. Our findings indicate that these increments in protein levels are not under transcriptional control because the level of Tc DNA polymerase β mRNA is maintained or slightly decreased during the exposure to oxidative stress. We propose a mechanism where a DNA repair pathway activates a cascade leading to the increment of expression and phosphorylation of Tc DNA polymerase β in response to oxidative damage, which is discussed in the context of what is known in other trypanosomes which lack transcriptional control.

A nodally condensed SUPG formulation for free-surface computation of steady-state flows constrained by unilateral contact - Application to rolling

NASA Astrophysics Data System (ADS)

Arora, Shitij; Fourment, Lionel

2018-05-01

In the context of the simulation of industrial hot forming processes, the resultant time-dependent thermo-mechanical multi-field problem (v →,p ,σ ,ɛ ) can be sped up by 10-50 times using the steady-state methods while compared to the conventional incremental methods. Though the steady-state techniques have been used in the past, but only on simple configurations and with structured meshes, and the modern-days problems are in the framework of complex configurations, unstructured meshes and parallel computing. These methods remove time dependency from the equations, but introduce an additional unknown into the problem: the steady-state shape. This steady-state shape x → can be computed as a geometric correction t → on the domain X → by solving the weak form of the steady-state equation v →.n →(t →)=0 using a Streamline Upwind Petrov Galerkin (SUPG) formulation. There exists a strong coupling between the domain shape and the material flow, hence, a two-step fixed point iterative resolution algorithm was proposed that involves (1) the computation of flow field from the resolution of thermo-mechanical equations on a prescribed domain shape and (2) the computation of steady-state shape for an assumed velocity field. The contact equations are introduced in the penalty form both during the flow computation as well as during the free-surface correction. The fact that the contact description is inhomogeneous, i.e., it is defined in the nodal form in the former, and in the weighted residual form in the latter, is assumed to be critical to the convergence of certain problems. Thus, the notion of nodal collocation is invoked in the weak form of the surface correction equation to homogenize the contact coupling. The surface correction algorithm is tested on certain analytical test cases and the contact coupling is tested with some hot rolling problems.

Research on optimal DEM cell size for 3D visualization of loess terraces

NASA Astrophysics Data System (ADS)

Zhao, Weidong; Tang, Guo'an; Ji, Bin; Ma, Lei

2009-10-01

In order to represent the complex artificial terrains like loess terraces in Shanxi Province in northwest China, a new 3D visual method namely Terraces Elevation Incremental Visual Method (TEIVM) is put forth by the authors. 406 elevation points and 14 enclosed constrained lines are sampled according to the TIN-based Sampling Method (TSM) and DEM Elevation Points and Lines Classification (DEPLC). The elevation points and constrained lines are used to construct Constrained Delaunay Triangulated Irregular Networks (CD-TINs) of the loess terraces. In order to visualize the loess terraces well by use of optimal combination of cell size and Elevation Increment Value (EIV), the CD-TINs is converted to Grid-based DEM (G-DEM) by use of different combination of cell size and EIV with linear interpolating method called Bilinear Interpolation Method (BIM). Our case study shows that the new visual method can visualize the loess terraces steps very well when the combination of cell size and EIV is reasonable. The optimal combination is that the cell size is 1 m and the EIV is 6 m. Results of case study also show that the cell size should be at least smaller than half of both the terraces average width and the average vertical offset of terraces steps for representing the planar shapes of the terraces surfaces and steps well, while the EIV also should be larger than 4.6 times of the terraces average height. The TEIVM and results above is of great significance to the highly refined visualization of artificial terrains like loess terraces.

Human infants' learning of social structures: the case of dominance hierarchy.

PubMed

Mascaro, Olivier; Csibra, Gergely

2014-01-01

We tested 15-month-olds' capacity to represent social-dominance hierarchies with more than two agents. Our results showed that infants found it harder to memorize dominance relations that were presented in an order that hindered the incremental formation of a single structure (Study 1). These results suggest that infants attempt to build structures incrementally, relation by relation, thereby simplifying the complex problem of recognizing a social structure. Infants also found circular dominance structures harder to process than linear dominance structures (Study 2). These expectations about the shape of structures may facilitate learning. Our results suggest that infants attempt to represent social structures composed of social relations. They indicate that human infants go beyond learning about individual social partners and their respective relations and form hypotheses about how social groups are organized.

Crosstalk: The Journal of Defense Software Engineering. Volume 22, Number 2, February 2009

DTIC Science & Technology

2009-02-01

IT Investment With Service-Oriented Architecture ( SOA ), Geoffrey Raines examines how an SOA offers federal senior leadership teams an incremental and...values, and is used by 30 million people. [1] Given budget constraints, an incre- mental approach seems to be required. A Path Forward SOA , as implemented...point of view, SOA offers several positive benefits. Language Neutral Integration Web-enabling applications with a com- mon browser interface became a

Ship Maintenance Processes with Collaborative Product Lifecycle Management and 3D Terrestrial Laser Scanning Tools: Reducing Costs and Increasing Productivity

DTIC Science & Technology

2011-09-20

optimal portfolio point on the efficient frontier, for example, Portfolio B on the chart in Figure A1. Then, by subsequently changing some of the ... optimized portfolio controlling for risk using the IRM methodology and tool suite. Results indicate that both rapid and incremental implementation...Results of the KVA and SD scenario analysis provided the financial information required to forecast an optimized

Bayesian Kernel Methods for Non-Gaussian Distributions: Binary and Multi-class Classification Problems

DTIC Science & Technology

2013-05-28

those of the support vector machine and relevance vector machine, and the model runs more quickly than the other algorithms . When one class occurs...incremental support vector machine algorithm for online learning when fewer than 50 data points are available. (a) Papers published in peer-reviewed journals...learning environments, where data processing occurs one observation at a time and the classification algorithm improves over time with new

BRYNTRN: A baryon transport computer code, computation procedures and data base

NASA Technical Reports Server (NTRS)

Wilson, John W.; Townsend, Lawrence W.; Chun, Sang Y.; Buck, Warren W.; Khan, Ferdous; Cucinotta, Frank

1988-01-01

The development is described of an interaction data base and a numerical solution to the transport of baryons through the arbitrary shield material based on a straight ahead approximation of the Boltzmann equation. The code is most accurate for continuous energy boundary values but gives reasonable results for discrete spectra at the boundary with even a relatively coarse energy grid (30 points) and large spatial increments (1 cm in H2O).

A Platform for Developing Autonomy Technologies for Small Military Robots

DTIC Science & Technology

2008-12-01

angular increments around the disk so described. A line scanner oriented so the plane of detected points is horizontal (e.g., the axis about which...behaviors can be implemented. Thus it will contain the custom scripts , executables, and data that compose the actual behavior of the robot. Currently, the...operating system was constructed to be relatively small and boot fast. Debian GNU/Linux, however, provides an installation script that downloads a

Combinatorial Markov Random Fields and Their Applications to Information Organization

DTIC Science & Technology

2008-02-01

titles, part-of- speech tags; • Image processing: images, colors, texture, blobs, interest points, caption words; • Video processing: video signal, audio...McGurk and MacDonald published their pioneering work [80] that revealed the multi-modal nature of speech perception: sound and moving lips compose one... Speech (POS) n-grams (that correspond to the syntactic structure of text). POS n-grams are extracted from sentences in an incremental manner: the first n

Increments and duplication events of enzymes and transcription factors influence metabolic and regulatory diversity in prokaryotes.

PubMed

Martínez-Núñez, Mario Alberto; Poot-Hernandez, Augusto Cesar; Rodríguez-Vázquez, Katya; Perez-Rueda, Ernesto

2013-01-01

In this work, the content of enzymes and DNA-binding transcription factors (TFs) in 794 non-redundant prokaryotic genomes was evaluated. The identification of enzymes was based on annotations deposited in the KEGG database as well as in databases of functional domains (COG and PFAM) and structural domains (Superfamily). For identifications of the TFs, hidden Markov profiles were constructed based on well-known transcriptional regulatory families. From these analyses, we obtained diverse and interesting results, such as the negative rate of incremental changes in the number of detected enzymes with respect to the genome size. On the contrary, for TFs the rate incremented as the complexity of genome increased. This inverse related performance shapes the diversity of metabolic and regulatory networks and impacts the availability of enzymes and TFs. Furthermore, the intersection of the derivatives between enzymes and TFs was identified at 9,659 genes, after this point, the regulatory complexity grows faster than metabolic complexity. In addition, TFs have a low number of duplications, in contrast to the apparent high number of duplications associated with enzymes. Despite the greater number of duplicated enzymes versus TFs, the increment by which duplicates appear is higher in TFs. A lower proportion of enzymes among archaeal genomes (22%) than in the bacterial ones (27%) was also found. This low proportion might be compensated by the interconnection between the metabolic pathways in Archaea. A similar proportion was also found for the archaeal TFs, for which the formation of regulatory complexes has been proposed. Finally, an enrichment of multifunctional enzymes in Bacteria, as a mechanism of ecological adaptation, was detected.

Increments and Duplication Events of Enzymes and Transcription Factors Influence Metabolic and Regulatory Diversity in Prokaryotes

PubMed Central

Martínez-Núñez, Mario Alberto; Poot-Hernandez, Augusto Cesar; Rodríguez-Vázquez, Katya; Perez-Rueda, Ernesto

2013-01-01

In this work, the content of enzymes and DNA-binding transcription factors (TFs) in 794 non-redundant prokaryotic genomes was evaluated. The identification of enzymes was based on annotations deposited in the KEGG database as well as in databases of functional domains (COG and PFAM) and structural domains (Superfamily). For identifications of the TFs, hidden Markov profiles were constructed based on well-known transcriptional regulatory families. From these analyses, we obtained diverse and interesting results, such as the negative rate of incremental changes in the number of detected enzymes with respect to the genome size. On the contrary, for TFs the rate incremented as the complexity of genome increased. This inverse related performance shapes the diversity of metabolic and regulatory networks and impacts the availability of enzymes and TFs. Furthermore, the intersection of the derivatives between enzymes and TFs was identified at 9,659 genes, after this point, the regulatory complexity grows faster than metabolic complexity. In addition, TFs have a low number of duplications, in contrast to the apparent high number of duplications associated with enzymes. Despite the greater number of duplicated enzymes versus TFs, the increment by which duplicates appear is higher in TFs. A lower proportion of enzymes among archaeal genomes (22%) than in the bacterial ones (27%) was also found. This low proportion might be compensated by the interconnection between the metabolic pathways in Archaea. A similar proportion was also found for the archaeal TFs, for which the formation of regulatory complexes has been proposed. Finally, an enrichment of multifunctional enzymes in Bacteria, as a mechanism of ecological adaptation, was detected. PMID:23922780

A Comparison of SF-36 and SF-12 Composite Scores and Subsequent Hospitalization and Mortality Risks in Long-Term Dialysis Patients

PubMed Central

Xu, Jianglin; Lin, Shu-Fang; Dean, Sandie Guerra; Lazarus, J. Michael; Hakim, Raymond M.

2010-01-01

Background and objectives: The Short Form 12 (SF-12) has not been validated for long-term dialysis patients. The study compared physical and mental component summary (PCS/MCS) scores from the SF-36 with those from the embedded SF-12 in a national cohort of dialysis patients. Design, setting, participants, & measurements: All 44,395 patients who had scorable SF-36 and SF-12 from January 1, 2006, to December 31, 2006, and were treated at Fresenius Medical Care, North America facilities were included. Death and first hospitalization were followed for up to 1 year from the date of survey. Correlation and agreement were obtained between PCS-36 and PCS-12 and MCS-36 and MCS-12; then Cox models were constructed to compare associated hazard ratios (HRs) between them. Results: Physical and mental dimensions both exhibited excellent intraclass correlation coefficients of 0.94. Each incremental point for both PCS-12 and PCS-36 was associated with a 2.4% lower adjusted HR of death and 0.4% decline in HR for first hospitalization (both P < 0.0001). Corresponding improvement in HR of death for each MCS point was 1.2% for MCS-12 and 1.3% for MCS-36, whereas both had similar 0.6% lower HR for hospitalization per point (all P < 0.0001). Conclusions: The use of the SF-12 alone or as part of a larger survey is valid in dialysis patients. Composite scores from the SF-12 and SF-36 have similar prognostic association with death and hospitalization risk. Prospective longitudinal studies of SF-12 surveys that consider responsiveness to specific clinical, situational, and interventional changes are needed in this population. PMID:20019120

Chapter 5. Damage, effects, and importance of dwarf mistletoes

Treesearch

B. W. Geils; F. G. Hawksworth

2002-01-01

All dwarf mistletoes are parasites that extract water, nutrients, and carbohydrates from the infected host; they are also pathogens that alter host physiology and morphology (Gill and Hawksworth 1961, Hawksworth and Wiens 1996). Disease or direct effects are reductions in diameter and height increment, survival, reproduction, and quality; witches’ brooms are formed in...

125 Brain Games for Babies: Simple Games To Promote Early Brain Development.

ERIC Educational Resources Information Center

Silberg, Jackie

Scientists believe that the stimulation that infants and young children receive determines which synapses form in the brain. This book presents 125 games for infants from birth to 12 months and is designed to nurture brain development. The book is organized chronologically in 3-month increments. Each game description includes information from…

Early Verb Constructions in French: Adjacency on the Left Edge

ERIC Educational Resources Information Center

Veneziano, Edy; Clark, Eve V.

2016-01-01

Children acquiring French elaborate their early verb constructions by adding adjacent morphemes incrementally at the left edge of core verbs. This hypothesis was tested with 2657 verb uses from four children between 1;3 and 2;7. Consistent with the Adjacency Hypothesis, children added clitic subjects frst only to present tense forms (as in…

Failure? Isn't It Time to Slay the Design-Dragon?

ERIC Educational Resources Information Center

Winkler, Dietmar R.

2009-01-01

There is a closed cycle of design education that replicates the most common design practice--and feeds into that practice that seeks awards based on incremental change supported by professional organizations and trade journals--that feeds back to education forms for imitation. This is the educational failure this paper cites. It takes to task the…

Coupling Adaptation Tipping Points and Engineering Options: New Insights for Resilient Water Infrastructure Replacement Planning

NASA Astrophysics Data System (ADS)

Smet, K.; de Neufville, R.; van der Vlist, M.

2017-12-01

This work presents an innovative approach for replacement planning for aging water infrastructure given uncertain future conditions. We draw upon two existing methodologies to develop an integrated long-term replacement planning framework. We first expand the concept of Adaptation Tipping Points to generate long-term planning timelines that incorporate drivers of investment related to both internal structural processes as well as changes in external operating conditions. Then, we use Engineering Options to explore different actions taken at key moments in this timeline. Contrasting to the traditionally more static approach to infrastructure design, designing the next generation of infrastructure so it can be changed incrementally is a promising method to safeguard current investments given future uncertainty. This up-front inclusion of structural options in the system actively facilitates future adaptation, transforming uncertainty management in infrastructure planning from reactive to more proactive. A two-part model underpins this approach. A simulation model generates diverse future conditions, allowing development of timelines of intervention moments in the structure's life. This feeds into an economic model, evaluating the lifetime performance of different replacement strategies, making explicit the value of different designs and their flexibility. A proof of concept study demonstrates this approach for a pumping station. The strategic planning timelines for this structure demonstrate that moments when capital interventions become necessary due to reduced functionality from structural degradation or changed operating conditions are widely spread over the structure's life. The disparate timing of these necessary interventions supports an incremental, adaptive mindset when considering end-of-life and replacement decisions. The analysis then explores different replacement decisions, varying the size and specific options included in the proposed new structure. Results show that incremental adaptive designs and incorporating options can improve economic performance, as compared to traditional, "build it once & build it big" designs. The benefit from incorporating flexibility varies with structural functionality, future conditions and the specific options examined.

Changes in retinal venular oxygen saturation predict activity of proliferative diabetic retinopathy 3 months after panretinal photocoagulation.

PubMed

Torp, Thomas Lee; Kawasaki, Ryo; Wong, Tien Yin; Peto, Tunde; Grauslund, Jakob

2018-03-01

Proliferative diabetic retinopathy (PDR) is a severe blinding condition. We investigated whether retinal metabolism, measured by retinal oximetry, may predict PDR activity after panretinal laser photocoagulation (PRP). We performed a prospective, interventional, clinical study of patients with treatment-naive PDR. Wide-field fluorescein angiography (OPTOS, Optomap) and global and focal retinal oximetry (Oxymap T1) were performed at baseline (BL), and 3 months (3M) after PRP. Angiographic findings were used to divide patients according to progression or non-progression of PDR after PRP. We evaluated differences in global and focal retinal oxygen saturation between patients with and without progression of PDR after PRP treatment. We included 45 eyes of 37 patients (median age and duration of diabetes were 51.6 and 20 years). Eyes with progression of PDR developed a higher retinal venous oxygen saturation than eyes with non-progression at 3M (global: +5.9% (95% CI -1.5 to 12.9), focal: +5.4%, (95% CI -4.1 to 14.8)). Likewise, progression of PDR was associated with a lower arteriovenular (AV) oxygen difference between BL and 3M (global: -6.1%, (95% CI -13.4 to -1.4), focal: -4.5% (95% CI -12.1 to 3.2)). In a multiple logistic regression model, increment in global retinal venular oxygen saturation (OR 1.30 per 1%-point increment, p=0.017) and decrement in AV oxygen saturation difference (OR 0.72 per 1%-point increment, p=0.016) at 3M independently predicted progression of PDR. Development of higher retinal venular and lower AV global oxygen saturation independently predicts progression of PDR despite standard PRP and might be a potential non-invasive marker of angiogenic disease activity. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Incremental prognostic value of biomarkers beyond the GRACE (Global Registry of Acute Coronary Events) score and high-sensitivity cardiac troponin T in non-ST-elevation acute coronary syndrome.

PubMed

Widera, Christian; Pencina, Michael J; Bobadilla, Maria; Reimann, Ines; Guba-Quint, Anja; Marquardt, Ivonne; Bethmann, Kerstin; Korf-Klingebiel, Mortimer; Kempf, Tibor; Lichtinghagen, Ralf; Katus, Hugo A; Giannitsis, Evangelos; Wollert, Kai C

2013-10-01

Guidelines recommend the use of validated risk scores and a high-sensitivity cardiac troponin assay for risk assessment in non-ST-elevation acute coronary syndrome (NSTE-ACS). The incremental prognostic value of biomarkers in this context is unknown. We calculated the Global Registry of Acute Coronary Events (GRACE) score and measured the circulating concentrations of high-sensitivity cardiac troponin T (hs-cTnT) and 8 selected cardiac biomarkers on admission in 1146 patients with NSTE-ACS. We used an hs-cTnT threshold at the 99th percentile of a reference population to define increased cardiac marker in the score. The magnitude of the increase in model performance when individual biomarkers were added to GRACE was assessed by the change (Δ) in the area under the receiver-operating characteristic curve (AUC), integrated discrimination improvement (IDI), and category-free net reclassification improvement [NRI(>0)]. Seventy-eight patients reached the combined end point of 6-month all-cause mortality or nonfatal myocardial infarction. The GRACE score alone had an AUC of 0.749. All biomarkers were associated with the risk of the combined end point and offered statistically significant improvement in model performance when added to GRACE (likelihood ratio test P ≤ 0.015). Growth differentiation factor 15 [ΔAUC 0.039, IDI 0.049, NRI(>0) 0.554] and N-terminal pro-B-type natriuretic peptide [ΔAUC 0.024, IDI 0.027, NRI(>0) 0.438] emerged as the 2 most promising biomarkers. Improvements in model performance upon addition of a second biomarker were small in magnitude. Biomarkers can add prognostic information to the GRACE score even in the current era of high-sensitivity cardiac troponin assays. The incremental information offered by individual biomarkers varies considerably, however.

Association between progression-free survival and health-related quality of life in oncology: a systematic review protocol.

PubMed

Kovic, Bruno; Guyatt, Gordon; Brundage, Michael; Thabane, Lehana; Bhatnagar, Neera; Xie, Feng

2016-09-02

There is an increasing number of new oncology drugs being studied, approved and put into clinical practice based on improvement in progression-free survival, when no overall survival benefits exist. In oncology, the association between progression-free survival and health-related quality of life is currently unknown, despite its importance for patients with cancer, and the unverified assumption that longer progression-free survival indicates improved health-related quality of life. Thus far, only 1 study has investigated this association, providing insufficient evidence and inconclusive results. The objective of this study protocol is to provide increased transparency in supporting a systematic summary of the evidence bearing on this association in oncology. Using the OVID platform in MEDLINE, Embase and Cochrane databases, we will conduct a systematic review of randomised controlled human trials addressing oncology issues published starting in 2000. A team of reviewers will, in pairs, independently screen and abstract data using standardised, pilot-tested forms. We will employ numerical integration to calculate mean incremental area under the curve between treatment groups in studies for health-related quality of life, along with total related error estimates, and a 95% CI around incremental area. To describe the progression-free survival to health-related quality of life association, we will construct a scatterplot for incremental health-related quality of life versus incremental progression-free survival. To estimate the association, we will use a weighted simple regression approach, comparing mean incremental health-related quality of life with either median incremental progression-free survival time or the progression-free survival HR, in the absence of overall survival benefit. Identifying direction and magnitude of association between progression-free survival and health-related quality of life is critically important in interpreting results of oncology trials. Systematic evidence produced from our study will contribute to improvement of patient care and practice of evidence-based medicine in oncology. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Using Analysis Increments (AI) to Estimate and Correct Systematic Errors in the Global Forecast System (GFS) Online

NASA Astrophysics Data System (ADS)

Bhargava, K.; Kalnay, E.; Carton, J.; Yang, F.

2017-12-01

Systematic forecast errors, arising from model deficiencies, form a significant portion of the total forecast error in weather prediction models like the Global Forecast System (GFS). While much effort has been expended to improve models, substantial model error remains. The aim here is to (i) estimate the model deficiencies in the GFS that lead to systematic forecast errors, (ii) implement an online correction (i.e., within the model) scheme to correct GFS following the methodology of Danforth et al. [2007] and Danforth and Kalnay [2008, GRL]. Analysis Increments represent the corrections that new observations make on, in this case, the 6-hr forecast in the analysis cycle. Model bias corrections are estimated from the time average of the analysis increments divided by 6-hr, assuming that initial model errors grow linearly and first ignoring the impact of observation bias. During 2012-2016, seasonal means of the 6-hr model bias are generally robust despite changes in model resolution and data assimilation systems, and their broad continental scales explain their insensitivity to model resolution. The daily bias dominates the sub-monthly analysis increments and consists primarily of diurnal and semidiurnal components, also requiring a low dimensional correction. Analysis increments in 2015 and 2016 are reduced over oceans, which is attributed to improvements in the specification of the SSTs. These results encourage application of online correction, as suggested by Danforth and Kalnay, for mean, seasonal and diurnal and semidiurnal model biases in GFS to reduce both systematic and random errors. As the error growth in the short-term is still linear, estimated model bias corrections can be added as a forcing term in the model tendency equation to correct online. Preliminary experiments with GFS, correcting temperature and specific humidity online show reduction in model bias in 6-hr forecast. This approach can then be used to guide and optimize the design of sub-grid scale physical parameterizations, more accurate discretization of the model dynamics, boundary conditions, radiative transfer codes, and other potential model improvements which can then replace the empirical correction scheme. The analysis increments also provide guidance in testing new physical parameterizations.

Early Design Choices: Capture, Model, Integrate, Analyze, Simulate

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2004-01-01

I. Designs are constructed incrementally to meet requirements and solve problems: a) Requirements types: objectives, scenarios, constraints, ilities. etc. b) Problem/issue types: risk/safety, cost/difficulty, interaction, conflict, etc. II. Capture requirements, problems and solutions: a) Collect design and analysis products and make them accessible for integration and analysis; b) Link changes in design requirements, problems and solutions; and c) Harvest design data for design models and choice structures. III. System designs are constructed by multiple groups designing interacting subsystems a) Diverse problems, choice criteria, analysis methods and point solutions. IV. Support integration and global analysis of repercussions: a) System implications of point solutions; b) Broad analysis of interactions beyond totals of mass, cost, etc.

Dynamics of intrinsic axial flows in unsheared, uniform magnetic fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, J. C.; Diamond, P. H.; Xu, X. Q.

2016-05-15

A simple model for the generation and amplification of intrinsic axial flow in a linear device, controlled shear decorrelation experiment, is proposed. This model proposes and builds upon a novel dynamical symmetry breaking mechanism, using a simple theory of drift wave turbulence in the presence of axial flow shear. This mechanism does not require complex magnetic field structure, such as shear, and thus is also applicable to intrinsic rotation generation in tokamaks at weak or zero magnetic shear, as well as to linear devices. This mechanism is essentially the self-amplification of the mean axial flow profile, i.e., a modulational instability.more » Hence, the flow development is a form of negative viscosity phenomenon. Unlike conventional mechanisms where the residual stress produces an intrinsic torque, in this dynamical symmetry breaking scheme, the residual stress induces a negative increment to the ambient turbulent viscosity. The axial flow shear is then amplified by this negative viscosity increment. The resulting mean axial flow profile is calculated and discussed by analogy with the problem of turbulent pipe flow. For tokamaks, the negative viscosity is not needed to generate intrinsic rotation. However, toroidal rotation profile gradient is enhanced by the negative increment in turbulent viscosity.« less

Grain growth effects on magnetic properties of Ni0.6Zn0.4Fe2O4 material prepared using mechanically alloyed nanoparticles

NASA Astrophysics Data System (ADS)

Syazwan, M. M.; Hapishah, A. N.; Azis, R. S.; Abbas, Z.; Hamidon, M. N.

2018-06-01

The effect of grain growth via sintering temperature on some magnetic properties is reported in this research. Ni0.6Zn0.4Fe2O4 nanoparticles were mechanically alloyed for 6 h and the sintering process starting from 600 to 1200 °C with 25 °C increment with only one sample subjected to all sintering scheme. The resulting change in the material was observed after each sintering. Single phase has been formed at 600 °C and above and the intensity peaks increased with sintering temperature as well as crystallinity increment. The morphological studies showed grain size increment as the sintering temperature increased. Moreover, the density increased while the porosity decreased with increasing sintering temperature. The saturation induction, Bs increased with the increased of grain size. On the other hand, the coercivity-vs-grain size plot reveals the critical single-domain-to-multidomain grain size to be about ∼400 nm. The initial permeability, μi value was increased with grain size enhancement. The microstructural grain growth, as exposed for the first time by this research, is shown as a process of multiple activation energy barriers.

Atrial fibrillation detection by heart rate variability in Poincare plot.

PubMed

Park, Jinho; Lee, Sangwook; Jeon, Moongu

2009-12-11

Atrial fibrillation (AFib) is one of the prominent causes of stroke, and its risk increases with age. We need to detect AFib correctly as early as possible to avoid medical disaster because it is likely to proceed into a more serious form in short time. If we can make a portable AFib monitoring system, it will be helpful to many old people because we cannot predict when a patient will have a spasm of AFib. We analyzed heart beat variability from inter-beat intervals obtained by a wavelet-based detector. We made a Poincare plot using the inter-beat intervals. By analyzing the plot, we extracted three feature measures characterizing AFib and non-AFib: the number of clusters, mean stepping increment of inter-beat intervals, and dispersion of the points around a diagonal line in the plot. We divided distribution of the number of clusters into two and calculated mean value of the lower part by k-means clustering method. We classified data whose number of clusters is more than one and less than this mean value as non-AFib data. In the other case, we tried to discriminate AFib from non-AFib using support vector machine with the other feature measures: the mean stepping increment and dispersion of the points in the Poincare plot. We found that Poincare plot from non-AFib data showed some pattern, while the plot from AFib data showed irregularly irregular shape. In case of non-AFib data, the definite pattern in the plot manifested itself with some limited number of clusters or closely packed one cluster. In case of AFib data, the number of clusters in the plot was one or too many. We evaluated the accuracy using leave-one-out cross-validation. Mean sensitivity and mean specificity were 91.4% and 92.9% respectively. Because pulse beats of ventricles are less likely to be influenced by baseline wandering and noise, we used the inter-beat intervals to diagnose AFib. We visually displayed regularity of the inter-beat intervals by way of Poincare plot. We tried to design an automated algorithm which did not require any human intervention and any specific threshold, and could be installed in a portable AFib monitoring system.

Experimental Study on the Propulsion Performance of the M-shape flapping wing’s bending angle

NASA Astrophysics Data System (ADS)

Chen, Jingxian; Nie, Xiaofang; Zhou, Ximing

2017-10-01

To study the the effect of flapping wing with different bending angles α on the thrust, in this paper, 9 M-shape flapping wing models with different bending angles, ranging for 0° to 22°, were designed. The rotating arm experiment was adopted to conduct the thrust test on the flapping wing models with different bending angels under the wind speed of 15m/s. The result shows that the span-wise flapping wing’s curvature could rectify the airflow, the proper curvature could prevent the span-wise airflow at the surface the flapping wing and leads the airflow towards backward, the amount of air pushed backwards by the flapping wing is larger, therefore the value of thrust is increased; As well as the rectification of M-shape flapping wing increases the thrust value, the flapping wing’s form drag also increased due to the bending angle. According to the results of the experiment, when the bending angle is less than 12°, the increment of the thrust is larger than the decrease of the form drag, so the thrust value increases gradually. However, when the bending angle is larger than 12°, the increment of the thrust is less than the decrease of the form drag, so the thrust value decreases. The thrust value is the largest when the bending angle is 12°.

A Tandem Semantic Interpreter for Incremental Parse Selection

DTIC Science & Technology

1990-09-28

syntactic role to semantic role. An exam - ple from Fillmore [10] is the sentence I copied that letter, which can be uttered when point- ing either to...person. We want the word fiddle to have the sort predicate violin as its lexical interpretation, how- ever, notthing. Thus, for Ross went for his fiddle...to receive an interpretation, a sort hierarchy is needed to establish that all violins are things. A well-structured sort hierarchy allows newly added

Spatial and velocity statistics of inertial particles in turbulent flows

NASA Astrophysics Data System (ADS)

Bec, J.; Biferale, L.; Cencini, M.; Lanotte, A. S.; Toschi, F.

2011-12-01

Spatial and velocity statistics of heavy point-like particles in incompressible, homogeneous, and isotropic three-dimensional turbulence is studied by means of direct numerical simulations at two values of the Taylor-scale Reynolds number Reλ ~ 200 and Reλ ~ 400, corresponding to resolutions of 5123 and 20483 grid points, respectively. Particles Stokes number values range from St ≈ 0.2 to 70. Stationary small-scale particle distribution is shown to display a singular -multifractal- measure, characterized by a set of generalized fractal dimensions with a strong sensitivity on the Stokes number and a possible, small Reynolds number dependency. Velocity increments between two inertial particles depend on the relative weight between smooth events - where particle velocity is approximately the same of the fluid velocity-, and caustic contributions - when two close particles have very different velocities. The latter events lead to a non-differentiable small-scale behaviour for the relative velocity. The relative weight of these two contributions changes at varying the importance of inertia. We show that moments of the velocity difference display a quasi bi-fractal-behavior and that the scaling properties of velocity increments for not too small Stokes number are in good agreement with a recent theoretical prediction made by K. Gustavsson and B. Mehlig arXiv: 1012.1789v1 [physics.flu-dyn], connecting the saturation of velocity scaling exponents with the fractal dimension of particle clustering.

High-resolution absolute position detection using a multiple grating

NASA Astrophysics Data System (ADS)

Schilling, Ulrich; Drabarek, Pawel; Kuehnle, Goetz; Tiziani, Hans J.

1996-08-01

To control electro-mechanical engines, high-resolution linear and rotary encoders are needed. Interferometric methods (grating interferometers) promise a resolution of a few nanometers, but have an ambiguity range of some microns. Incremental encoders increase the absolute measurement range by counting the signal periods starting from a defined initial point. In many applications, however, it is not possible to move to this initial point, so that absolute encoders have to be used. Absolute encoders generally have a scale with two or more tracks placed next to each other. Therefore, they use a two-dimensional grating structure to measure a one-dimensional position. We present a new method, which uses a one-dimensional structure to determine the position in one dimension. It is based on a grating with a large grating period up to some millimeters, having the same diffraction efficiency in several predefined diffraction orders (multiple grating). By combining the phase signals of the different diffraction orders, it is possible to establish the position in an absolute range of the grating period with a resolution like incremental grating interferometers. The principal functionality was demonstrated by applying the multiple grating in a heterodyne grating interferometer. The heterodyne frequency was generated by a frequency modulated laser in an unbalanced interferometer. In experimental measurements an absolute range of 8 mm was obtained while achieving a resolution of 10 nm.

Theory and generation of conditional, scalable sub-Gaussian random fields

NASA Astrophysics Data System (ADS)

Panzeri, M.; Riva, M.; Guadagnini, A.; Neuman, S. P.

2016-03-01

Many earth and environmental (as well as a host of other) variables, Y, and their spatial (or temporal) increments, ΔY, exhibit non-Gaussian statistical scaling. Previously we were able to capture key aspects of such non-Gaussian scaling by treating Y and/or ΔY as sub-Gaussian random fields (or processes). This however left unaddressed the empirical finding that whereas sample frequency distributions of Y tend to display relatively mild non-Gaussian peaks and tails, those of ΔY often reveal peaks that grow sharper and tails that become heavier with decreasing separation distance or lag. Recently we proposed a generalized sub-Gaussian model (GSG) which resolves this apparent inconsistency between the statistical scaling behaviors of observed variables and their increments. We presented an algorithm to generate unconditional random realizations of statistically isotropic or anisotropic GSG functions and illustrated it in two dimensions. Most importantly, we demonstrated the feasibility of estimating all parameters of a GSG model underlying a single realization of Y by analyzing jointly spatial moments of Y data and corresponding increments, ΔY. Here, we extend our GSG model to account for noisy measurements of Y at a discrete set of points in space (or time), present an algorithm to generate conditional realizations of corresponding isotropic or anisotropic random fields, introduce two approximate versions of this algorithm to reduce CPU time, and explore them on one and two-dimensional synthetic test cases.

Scores for post-myocardial infarction risk stratification in the community.

PubMed

Singh, Mandeep; Reeder, Guy S; Jacobsen, Steven J; Weston, Susan; Killian, Jill; Roger, Véronique L

2002-10-29

Several scores, most of which were derived from clinical trials, have been proposed for stratifying risk after myocardial infarctions (MIs). Little is known about their generalizability to the community, their respective advantages, and whether the ejection fraction (EF) adds prognostic information to the scores. The purpose of this study is to evaluate the Thrombolysis in Myocardial Infarction (TIMI) and Predicting Risk of Death in Cardiac Disease Tool (PREDICT) scores in a geographically defined MI cohort and determine the incremental value of EF for risk stratification. MIs occurring in Olmsted County were validated with the use of standardized criteria and stratified with the ECG into ST-segment elevation (STEMI) and non-ST-segment elevation (NSTEMI) MI. Logistic regression examined the discriminant accuracy of the TIMI and PREDICT scores to predict death and recurrent MI and assessed the incremental value of the EF. After 6.3+/-4.7 years, survival was similar for the 562 STEMIs and 717 NSTEMIs. The discriminant accuracy of the TIMI score was good in STEMI but only fair in NSTEMI. Across time and end points, irrespective of reperfusion therapy, the discriminant accuracy of the PREDICT score was consistently superior to that of the TIMI scores, largely because PREDICT includes comorbidity; EF provided incremental information over that provided by the scores and comorbidity. In the community, comorbidity and EF convey important prognostic information and should be included in approaches for stratifying risk after MI.

Study on compressive strength of self compacting mortar cubes under normal & electric oven curing methods

NASA Astrophysics Data System (ADS)

Prasanna Venkatesh, G. J.; Vivek, S. S.; Dhinakaran, G.

2017-07-01

In the majority of civil engineering applications, the basic building blocks were the masonry units. Those masonry units were developed as a monolithic structure by plastering process with the help of binding agents namely mud, lime, cement and their combinations. In recent advancements, the mortar study plays an important role in crack repairs, structural rehabilitation, retrofitting, pointing and plastering operations. The rheology of mortar includes flowable, passing and filling properties which were analogous with the behaviour of self compacting concrete. In self compacting (SC) mortar cubes, the cement was replaced by mineral admixtures namely silica fume (SF) from 5% to 20% (with an increment of 5%), metakaolin (MK) from 10% to 30% (with an increment of 10%) and ground granulated blast furnace slag (GGBS) from 25% to 75% (with an increment of 25%). The ratio between cement and fine aggregate was kept constant as 1: 2 for all normal and self compacting mortar mixes. The accelerated curing namely electric oven curing with the differential temperature of 128°C for the period of 4 hours was adopted. It was found that the compressive strength obtained from the normal and electric oven method of curing was higher for self compacting mortar cubes than normal mortar cube. The cement replacement by 15% SF, 20% MK and 25%GGBS obtained higher strength under both curing conditions.

Energy system contribution in a maximal incremental test: correlations with pacing and overall performance in a 10-km running trial.

PubMed

Damasceno, M V; Pasqua, L A; Lima-Silva, A E; Bertuzzi, R

2015-11-01

This study aimed to verify the association between the contribution of energy systems during an incremental exercise test (IET), pacing, and performance during a 10-km running time trial. Thirteen male recreational runners completed an incremental exercise test on a treadmill to determine the respiratory compensation point (RCP), maximal oxygen uptake (V˙O2max), peak treadmill speed (PTS), and energy systems contribution; and a 10-km running time trial (T10-km) to determine endurance performance. The fractions of the aerobic (WAER) and glycolytic (WGLYCOL) contributions were calculated for each stage based on the oxygen uptake and the oxygen energy equivalents derived by blood lactate accumulation, respectively. Total metabolic demand (WTOTAL) was the sum of these two energy systems. Endurance performance during the T10-km was moderately correlated with RCP, V˙O2max and PTS (P<@0.05), and moderate-to-highly correlated with WAER, WGLYCOL, and WTOTAL (P<0.05). In addition, WAER, WGLYCOL, and WTOTAL were also significantly correlated with running speed in the middle (P<0.01) and final (P<0.01) sections of the T10-km. These findings suggest that the assessment of energy contribution during IET is potentially useful as an alternative variable in the evaluation of endurance runners, especially because of its relationship with specific parts of a long-distance race.

Construction and updating of event models in auditory event processing.

PubMed

Huff, Markus; Maurer, Annika E; Brich, Irina; Pagenkopf, Anne; Wickelmaier, Florian; Papenmeier, Frank

2018-02-01

Humans segment the continuous stream of sensory information into distinct events at points of change. Between 2 events, humans perceive an event boundary. Present theories propose changes in the sensory information to trigger updating processes of the present event model. Increased encoding effort finally leads to a memory benefit at event boundaries. Evidence from reading time studies (increased reading times with increasing amount of change) suggest that updating of event models is incremental. We present results from 5 experiments that studied event processing (including memory formation processes and reading times) using an audio drama as well as a transcript thereof as stimulus material. Experiments 1a and 1b replicated the event boundary advantage effect for memory. In contrast to recent evidence from studies using visual stimulus material, Experiments 2a and 2b found no support for incremental updating with normally sighted and blind participants for recognition memory. In Experiment 3, we replicated Experiment 2a using a written transcript of the audio drama as stimulus material, allowing us to disentangle encoding and retrieval processes. Our results indicate incremental updating processes at encoding (as measured with reading times). At the same time, we again found recognition performance to be unaffected by the amount of change. We discuss these findings in light of current event cognition theories. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Optimization of incremental structure from motion combining a random k-d forest and pHash for unordered images in a complex scene

NASA Astrophysics Data System (ADS)

Zhan, Zongqian; Wang, Chendong; Wang, Xin; Liu, Yi

2018-01-01

On the basis of today's popular virtual reality and scientific visualization, three-dimensional (3-D) reconstruction is widely used in disaster relief, virtual shopping, reconstruction of cultural relics, etc. In the traditional incremental structure from motion (incremental SFM) method, the time cost of the matching is one of the main factors restricting the popularization of this method. To make the whole matching process more efficient, we propose a preprocessing method before the matching process: (1) we first construct a random k-d forest with the large-scale scale-invariant feature transform features in the images and combine this with the pHash method to obtain a value of relatedness, (2) we then construct a connected weighted graph based on the relatedness value, and (3) we finally obtain a planned sequence of adding images according to the principle of the minimum spanning tree. On this basis, we attempt to thin the minimum spanning tree to reduce the number of matchings and ensure that the images are well distributed. The experimental results show a great reduction in the number of matchings with enough object points, with only a small influence on the inner stability, which proves that this method can quickly and reliably improve the efficiency of the SFM method with unordered multiview images in complex scenes.

Endogenous overexpression of an active phosphorylated form of DNA polymerase β under oxidative stress in Trypanosoma cruzi

PubMed Central

Moreira-Ramos, Sandra; Castillo, Christian; Kemmerling, Ulrike; Lapier, Michel; Maya, Juan Diego; Solari, Aldo

2018-01-01

Trypanosoma cruzi is exposed during its life to exogenous and endogenous oxidative stress, leading to damage of several macromolecules such as DNA. There are many DNA repair pathways in the nucleus and mitochondria (kinetoplast), where specific protein complexes detect and eliminate damage to DNA. One group of these proteins is the DNA polymerases. In particular, Tc DNA polymerase β participates in kinetoplast DNA replication and repair. However, the mechanisms which control its expression under oxidative stress are still unknown. Here we describe the effect of oxidative stress on the expression and function of Tc DNA polymerase β To this end parasite cells (epimastigotes and trypomastigotes) were exposed to peroxide during short periods of time. Tc DNA polymerase β which was associated physically with kinetoplast DNA, showed increased protein levels in response to peroxide damage in both parasite forms analyzed. Two forms of DNA polymerase β were identified and overexpressed after peroxide treatment. One of them was phosphorylated and active in DNA synthesis after renaturation on polyacrylamide electrophoresis gel. This phosphorylated form showed 3-4-fold increase in both parasite forms. Our findings indicate that these increments in protein levels are not under transcriptional control because the level of Tc DNA polymerase β mRNA is maintained or slightly decreased during the exposure to oxidative stress. We propose a mechanism where a DNA repair pathway activates a cascade leading to the increment of expression and phosphorylation of Tc DNA polymerase β in response to oxidative damage, which is discussed in the context of what is known in other trypanosomes which lack transcriptional control. PMID:29432450

Motivational and evolutionary aspects of a physical exercise training program: a longitudinal study

PubMed Central

Rosa, João P. P.; de Souza, Altay A. L.; de Lima, Giscard H. O.; Rodrigues, Dayane F.; de Aquino Lemos, Valdir; da Silva Alves, Eduardo; Tufik, Sergio; de Mello, Marco T.

2015-01-01

Several studies have indicated that motivational level and prior expectations influence one’s commitment to physical activity. Moreover, these aspects are not properly described in terms of proximal (SDT, Self Determination Theory) and distal (evolutionary) explanations in the literature. This paper aims to verify if level of motivation (BREQ-2, Behavioral Regulation in Exercise Questionnaire-2) and expectations regarding regular physical exercise (IMPRAF-54) before starting a 1-year exercise program could determine likelihood of completion. Ninety-four volunteers (53 women) included a completed protocol group (CPG; n = 21) and drop-out group (n = 73). The IMPRAF-54 scale was used to assess six different expectations associated with physical activity, and the BREQ-2 inventory was used to assess the level of motivation in five steps (from amotivation to intrinsic motivation). Both questionnaires were assessed before starting a regular exercise program. The CPG group presented higher sociability and lower pleasure scores according to IMPRAF-54 domains. A logistic regression analysis showed that a one-point increment on sociability score increased the chance of completing the program by 10%, and the same one-point increment on pleasure score reduced the chance of completing the protocol by 16%. ROC curves were also calculated to establish IMPRAF-54 cutoffs for adherence (Sociability – 18.5 points – 81% sensibility/50% specificity) and dropout (Pleasure – 25.5 points – 86% sensibility/20% specificity) of the exercise protocol. Our results indicate that an expectation of social interaction was a positive factor in predicting adherence to exercise. Grounded in SDT and its innate needs (competence, autonomy, relatedness), physical exercise is not an end; it is a means to achieve autonomy and self-cohesion. The association of physical activity with social practices, as occurs in hunter-gathering groups, can engage people to be physically active and can provide better results in adherence exercise programs for the general population. PMID:26042076

A constitutive law for finite element contact problems with unclassical friction

NASA Technical Reports Server (NTRS)

Plesha, M. E.; Steinetz, B. M.

1986-01-01

Techniques for modeling complex, unclassical contact-friction problems arising in solid and structural mechanics are discussed. A constitutive modeling concept is employed whereby analytic relations between increments of contact surface stress (i.e., traction) and contact surface deformation (i.e., relative displacement) are developed. Because of the incremental form of these relations, they are valid for arbitrary load-deformation histories. The motivation for the development of such a constitutive law is that more realistic friction idealizations can be implemented in finite element analysis software in a consistent, straightforward manner. Of particular interest is modeling of two-body (i.e., unlubricated) metal-metal, ceramic-ceramic, and metal-ceramic contact. Interfaces involving ceramics are of engineering importance and are being considered for advanced turbine engines in which higher temperature materials offer potential for higher engine fuel efficiency.

On the analytical determination of relaxation modulus of viscoelastic materials by Prony's interpolation method

NASA Technical Reports Server (NTRS)

Rodriguez, Pedro I.

1986-01-01

A computer implementation to Prony's curve fitting by exponential functions is presented. The method, although more than one hundred years old, has not been utilized to its fullest capabilities due to the restriction that the time range must be given in equal increments in order to obtain the best curve fit for a given set of data. The procedure used in this paper utilizes the 3-dimensional capabilities of the Interactive Graphics Design System (I.G.D.S.) in order to obtain the equal time increments. The resultant information is then input into a computer program that solves directly for the exponential constants yielding the best curve fit. Once the exponential constants are known, a simple least squares solution can be applied to obtain the final form of the equation.

78 FR 11101 - Air Quality: Revision to Definition of Volatile Organic Compounds-Exclusion of trans

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... form of encryption and be free of any defects or viruses. For additional information about the EPA's... radical (OH); (ii) the maximum incremental reactivity (MIR) on a reactivity per unit mass basis; and (iii... discussed below. The k OH is the reaction rate constant of the compound with the OH radical in the air. This...

Homologous stress adaptation, antibiotic resistance, and biofilm forming ability of Salmonella enterica serovar Heidelberg (ATCC8326) on different food-contact surfaces following exposure to sub-lethal chlorine concentrations

USDA-ARS?s Scientific Manuscript database

Salmonella enterica serovar Heidelberg (American Type Culture Collection; ATCC 8326) was examined for the ability to adapt to the homologous stress of chlorine through exposure to increasing chlorine concentrations (25 ppm daily increments) in tryptic soy broth (TSB). The tested strain exhibited an ...

Advanced Students' L1 (Swedish) and L2 (English) Mastery of Suffixation

ERIC Educational Resources Information Center

Karlsson, Monica

2015-01-01

Developing the skill to form derivatives is a slow incremental process even for native speakers of English, starting in elementary school and continuing through high school. In fact, it appears to be a universally challenging area of the lexicon. Nevertheless, studies have shown that it is one of the most important skills to possess for a learner…

The value of crossdating to retain high-frequency variability, climate signals, and extreme events in environmental proxies

Treesearch

Bryan A. Black; Daniel Griffin; Peter van der Sleen; Alan D. Wanamaker; James H. Speer; David C. Frank; David W. Stahle; Neil Pederson; Carolyn A. Copenheaver; Valerie Trouet; Shelly Griffin; Bronwyn M. Gillanders

2016-01-01

High-resolution biogenic and geologic proxies in which one increment or layer is formed per year are crucial to describing natural ranges of environmental variability in Earth's physical and biological systems. However, dating controls are necessary to ensure temporal precision and accuracy; simple counts cannot ensure that all layers are placed correctly in time...

A University-Industry Cooperation Model for Small and Medium Enterprises: The Case of Chengdu KEDA Optoelectronic Technology Ltd.

ERIC Educational Resources Information Center

Peng, Shanzhong; Ferreira, Fernando A. F.; Zheng, He

2017-01-01

In this study, we develop a firm-dominated incremental cooperation model. Following the critical review of current literature and various cooperation models, we identified a number of strengths and shortcomings that form the basis for our framework. The objective of our theoretical model is to contribute to overcome the existing gap within…

Genetic variation in tree structure and its relation to size in Douglas-fir: II. crown form, branch characters, and foliage characters.

Treesearch

J.B. St. Clair

1994-01-01

Genetic variation and covariation among traits of tree size and structure were assessed in an 18-year-old Douglas-fir (Pseudotsuga menziesii var. menziesii (Mirb.) Franco) genetic test in the Coast Range of Oregon. Considerable genetic variation was found for relative crown width; stem increment per crown projection area; leaf...

Effectively Coping With Task Stress: A Study of the Validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF).

PubMed

O'Connor, Peter; Nguyen, Jessica; Anglim, Jeromy

2017-01-01

In this study, we investigated the validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF; Petrides, 2009) in the context of task-induced stress. We used a total sample of 225 volunteers to investigate (a) the incremental validity of the TEIQue-SF over other predictors of coping with task-induced stress, and (b) the construct validity of the TEIQue-SF by examining the mechanisms via which scores from the TEIQue-SF predict coping outcomes. Results demonstrated that the TEIQue-SF possessed incremental validity over the Big Five personality traits in the prediction of emotion-focused coping. Results also provided support for the construct validity of the TEIQue-SF by demonstrating that this measure predicted adaptive coping via emotion-focused channels. Specifically, results showed that, following a task stressor, the TEIQue-SF predicted low negative affect and high task performance via high levels of emotion-focused coping. Consistent with the purported theoretical nature of the trait emotional intelligence (EI) construct, trait EI as assessed by the TEIQue-SF primarily enhances affect and performance in stressful situations by regulating negative emotions.

Recurring Slope Lineae (RSL) Observations Suggest Widespread Occurrence and Complex Behavior

NASA Astrophysics Data System (ADS)

Stillman, D. E.; Grimm, R. E.; Wagstaff, K.; Bue, B. D.; Michaels, T. I.

2017-12-01

RSL are described as narrow dark features that incrementally lengthen down steep slopes during warm seasons, fade in cold seasons, and recur annually. HiRISE observations from 5+ Mars years have allowed us to confirm 100 RSL sites and identify more than 600 candidate RSL sites. Detailed analysis of a few RSL sites has been performed using computer assisted analysis. RSL occur in low-albedo (dust-poor) regions with a latitude range of 42.2°N - 53.1°S. They are densely clustered throughout Valles Marineris (VM), in the light-toned layered deposits of Margaritifer and SW Arabia Terrae, Cerberus Fossae, and well-preserved impact craters in Chryse and Acidalia Planitae (CAP). RSL sites are also found at lower densities throughout the low-albedo highland terrains. RSL incrementally lengthen when their slopes are warm, thus the season at which RSL lengthen is dependent on latitude and slope orientation. While RSL occur on all slope orientation there is a large bias to W-facing and equatorial facing slopes. During the RSL activity season, RSL lengthening does not appear to be constant: (1) CAP RSL initially quickly lengthen and slow their lengthening rate by about an order of magnitude as temperatures increase, (2) many VM RSL sites possess RSL that fade at the same time that neighboring RSL on the same slope incrementally lengthen, and (3) some RSL sites in the southern mid-latitudes show at least two pulses of RSL activity - during the southern fall and summer RSL incrementally lengthen, fade, and then start incrementally lengthening again followed by fading as temperatures cool. The correlation of RSL activity to surface temperature, spectrally-derived hydrated salts, and quick fading all point to a wet formation mechanism. However, water sources remain problematic as water budgets suggest a much greater amount of water than could be trapped from the atmosphere. Additionally, some RSL occur in locations where subsurface discharge via an aquifer would be challenging. Thus, our presentation will exhibit the complex behaviors of RSL and compare these behaviors to wet, dry, and hybrid formation mechanisms. Overall, a formation mechanism that is consistent with all the observations remains elusive.

Cost-effectiveness of dapagliflozin versus DPP-4 inhibitors as an add-on to Metformin in the Treatment of Type 2 Diabetes Mellitus from a UK Healthcare System Perspective.

PubMed

Charokopou, M; McEwan, P; Lister, S; Callan, L; Bergenheim, K; Tolley, K; Postema, R; Townsend, R; Roudaut, M

2015-11-05

Type 2 diabetes mellitus (T2DM) is a chronic, progressive condition where the primary treatment goal is to maintain control of glycated haemoglobin (HbA1c). In order for healthcare decision makers to ensure patients receive the highest standard of care within the available budget, the clinical benefits of each treatment option must be balanced against the economic consequences. The aim of this study was to assess the cost-effectiveness of dapagliflozin, the first-in-class sodium-glucose co-transporter 2 (SGLT2) inhibitor, compared with a dipeptidyl peptidase-4 inhibitor (DPP-4i), when added to metformin for the treatment of patients with T2DM inadequately controlled on metformin alone. The previously published and validated Cardiff diabetes model was used as the basis for this economic evaluation, with treatment effect parameters sourced from a systematic review and network meta-analysis. Costs, derived from a UK healthcare system perspective, and quality-adjusted life years (QALYs), were used to present the final outcome as an incremental cost-effectiveness ratio (ICER) over a lifetime horizon. Univariate and probabilistic sensitivity analyses (PSA) were carried out to assess uncertainty in the model results. Compared with DPP-4i, dapagliflozin was associated with a mean incremental benefit of 0.032 QALYs (95% confidence interval [CI]: -0.022, 0.140) and with an incremental cost of £216 (95% CI: £-258, £795). This resulted in an ICER point estimate of £6,761 per QALY gained. Sensitivity analysis determined incremental costs to be insensitive to variation in most parameters, with only the treatment effect on weight having a notable impact on the incremental QALYs; however, there were no scenarios which raised the ICER above £15,000 per QALY. The PSA estimated that dapagliflozin had an 85% probability of being cost-effective at a willingness-to-pay threshold of £20,000 per QALY gained. Dapagliflozin in combination with metformin was shown to be a cost-effective treatment option from a UK healthcare system perspective for patients with T2DM who are inadequately controlled on metformin alone.

The value of atorvastatin over the product life cycle in the United States.

PubMed

Grabner, Michael; Johnson, Wallace; Abdulhalim, Abdulla M; Kuznik, Andreas; Mullins, C Daniel

2011-10-01

US health care reform mandates the reduction of wasteful health care spending while maintaining quality of care. Introducing new drugs into crowded therapeutic classes may be viewed as offering "me-too" (new drugs with a similar mechanism of action compared to existing drugs) drugs without incremental benefit. This article presents an analysis of the incremental costs and benefits of atorvastatin, a lipid-lowering agent. This analysis models the cost-effectiveness of atorvastatin over the product life cycle. The yearly cost-effectiveness of atorvastatin compared to simvastatin was modeled from 1997 to 2030 from the point of view of a US third-party payer. Estimates for incremental costs (in US $) and effects (in quality-adjusted life-years [QALYs]) for the primary and secondary prevention of cardiovascular events were taken from previously published literature and adjusted for changes in drug prices over time. Estimates of total statin use were derived using the National Health and Nutrition Examination Survey. Sensitivity analyses were conducted to examine variations in study parameters, including drug prices, indications, and discount rates. Assuming increasing statin use over time (with a mean of 1.07 million new users per year) and a 3% discount rate, the cumulative incremental cost-effectiveness ratio (ICER) of atorvastatin versus simvastatin ranged from cost-savings at release to a maximum of $45,066/QALY after 6 years of generic simvastatin use in 2012. Over the full modeled life cycle (1997-2030), the cumulative ICER of atorvastatin was $20,331/QALY. The incremental value of atorvastatin to US payers (after subtracting costs) was estimated at $44.57 to $194.78 billion, depending on willingness to pay. Findings from the sensitivity analyses were similar. A hypothetical situation in which atorvastatin did not exist was associated with a reduction in total expenditures but also a loss of QALYs gained. The cumulative ICER of atorvastatin varied across the product life cycle, increasing during the period between generic simvastatin entry and generic atorvastatin entry, and decreasing thereafter. Copyright © 2011 Elsevier HS Journals, Inc. All rights reserved.

Fixed, low radiant exposure vs. incremental radiant exposure approach for diode laser hair reduction: a randomized, split axilla, comparative single-blinded trial.

PubMed

Pavlović, M D; Adamič, M; Nenadić, D

2015-12-01

Diode lasers are the most commonly used treatment modalities for unwanted hair reduction. Only a few controlled clinical trials but not a single randomized controlled trial (RCT) compared the impact of various laser parameters, especially radiant exposure, onto efficacy, tolerability and safety of laser hair reduction. To compare the safety, tolerability and mid-term efficacy of fixed, low and incremental radiant exposures of diode lasers (800 nm) for axillary hair removal, we conducted an intrapatient, left-to-right, patient- and assessor-blinded and controlled trial. Diode laser (800 nm) treatments were evaluated in 39 study participants (skin type II-III) with unwanted axillary hairs. Randomization and allocation to split axilla treatments were carried out by a web-based randomization tool. Six treatments were performed at 4- to 6-week intervals with study subjects blinded to the type of treatment. Final assessment of hair reduction was conducted 6 months after the last treatment by means of blinded 4-point clinical scale using photographs. The primary endpoint was reduction in hair growth, and secondary endpoints were patient-rated tolerability and satisfaction with the treatment, treatment-related pain and adverse effects. Excellent reduction in axillary hairs (≥ 76%) at 6-month follow-up visit after receiving fixed, low and incremental radiant exposure diode laser treatments was obtained in 59% and 67% of study participants respectively (Z value: 1.342, P = 0.180). Patients reported lower visual analogue scale (VAS) pain score on the fixed (4.26) than on the incremental radiant exposure side (5.64) (P < 0.0003). The only side-effect was mild and transient erythema. Subjects better tolerated the fixed, low radiant exposure protocol (P = 0.03). The majority of the study participants were satisfied with both treatments. Both low and incremental radiant exposures produced similar hair reduction and high and comparable patient satisfaction. However, low radiant exposure diode laser treatments were less painful and better tolerated. © 2015 European Academy of Dermatology and Venereology.

Enhanced thermoelectric performance of In2O3-based ceramics via Nanostructuring and Point Defect Engineering

PubMed Central

Lan, Jin-Le; Liu, Yaochun; Lin, Yuan-Hua; Nan, Ce-Wen; Cai, Qing; Yang, Xiaoping

2015-01-01

The issue of how to improve the thermoelectric figure of merit (ZT) in oxide semiconductors has been challenging for more than 20 years. In this work, we report an effective path to substantial reduction in thermal conductivity and increment in carrier concentration, and thus a remarkable enhancement in the ZT value is achieved. The ZT value of In2O3 system was enhanced 4-fold by nanostructuing (nano-grains and nano-inclusions) and point defect engineering. The introduction of point defects in In2O3 results in a glass-like thermal conductivity. The lattice thermal conductivity could be reduced by 60%, and extraordinary low lattice thermal conductivity (1.2 W m−1 K−1 @ 973 K) below the amorphous limit was achieved. Our work paves a path for enhancing the ZT in oxides by both the nanosturcturing and the point defect engineering for better phonon-glasses and electron-crystal (PGEC) materials. PMID:25586762

INFLUENCE OF MASS ON DISPLACEMENT THRESHOLD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Setyawan, Wahyu; Selby, A.; Nandipati, Giridhar

2014-12-30

Molecular dynamics simulations are performed to investigate the effect of mass on displacement threshold energy in Cr, Mo, Fe and W. For each interatomic potential, the mass of the atoms is varied among those metals for a total of 16 combinations. The average threshold energy over all crystal directions is calculated within the irreducible crystal directions using appropriate weighting factors. The weighting factors account for the different number of equivalent directions among the grid points and the different solid angle coverage of each grid point. The grid points are constructed with a Miller index increment of 1/24 for a totalmore » of 325 points. For each direction, 10 simulations each with a different primary-knock-on atom are performed. The results show that for each interatomic potential, the average threshold energy is insensitive to the mass; i.e., the values are the same within the standard error. In the future, the effect of mass on high-energy cascades for a given interatomic potential will be investigated.« less

Applying Dynamical Systems Theory to Optimize Libration Point Orbit Stationkeeping Maneuvers for WIND

NASA Technical Reports Server (NTRS)

Brown, Jonathan M.; Petersen, Jeremy D.

2014-01-01

NASA's WIND mission has been operating in a large amplitude Lissajous orbit in the vicinity of the interior libration point of the Sun-Earth/Moon system since 2004. Regular stationkeeping maneuvers are required to maintain the orbit due to the instability around the collinear libration points. Historically these stationkeeping maneuvers have been performed by applying an incremental change in velocity, or (delta)v along the spacecraft-Sun vector as projected into the ecliptic plane. Previous studies have shown that the magnitude of libration point stationkeeping maneuvers can be minimized by applying the (delta)v in the direction of the local stable manifold found using dynamical systems theory. This paper presents the analysis of this new maneuver strategy which shows that the magnitude of stationkeeping maneuvers can be decreased by 5 to 25 percent, depending on the location in the orbit where the maneuver is performed. The implementation of the optimized maneuver method into operations is discussed and results are presented for the first two optimized stationkeeping maneuvers executed by WIND.

Non-operative anti-caries agents and dental caries increment among adults at high caries risk: a retrospective cohort study.

PubMed

Chaffee, Benjamin W; Cheng, Jing; Featherstone, John D B

2015-09-24

Consensus guidelines support non-operative preventives for dental caries management; yet, their use in practice is far from universal. The purpose of this study was to evaluate the effectiveness of non-operative anti-caries agents in caries prevention among high caries risk adults at a university clinic where risk-based caries management is emphasized. This retrospective observational study drew data from the electronic patient records of non-edentulous adult patients deemed to be at high risk for dental caries during baseline oral evaluations that were completed between July 1, 2007 and December 31, 2012 at a dental university in the United States. We calculated and compared adjusted mean estimates for the number of new decayed or restored teeth (DFT increment) from baseline to the next completed oral evaluation (N = 2,724 patients with follow-up) across three categories of delivery of non-operative anti-caries agents (e.g., high-concentration fluoride toothpaste, chlorhexidine rinse, xylitol products): never, at a single appointment, or at ≥2 appointments ≥4 weeks apart. Estimates were adjusted for patient and provider characteristics, baseline dental status, losses-to-follow-up, and follow-up time. Approximately half the patients did not receive any form of non-operative anti-caries agent. Most that received anti-caries agents were given more than one type of product in combination. One-time delivery of anti-caries agents was associated with a similar DFT increment as receiving no such therapy (difference in increment: -0.04; 95% CI: -0.28, 0.21). However, repeated, spaced delivery of anti-caries agents was associated with approximately one decayed or restored tooth prevented over 18 months for every three patients treated (difference in increment: -0.35; 95% CI: -0.65, -0.08). These results lend evidence that repeatedly receiving anti-caries agents can reduce tooth decay among high-risk patients engaged in regular dental care.

Mediterranean and Nordic diet scores and long-term changes in body weight and waist circumference: results from a large cohort study.

PubMed

Li, Yingjun; Roswall, Nina; Ström, Peter; Sandin, Sven; Adami, Hans-Olov; Weiderpass, Elisabete

2015-12-28

Dietary patterns, which represent a broader picture of food and nutrient consumption, have gained increasing interest over the last decades. In a cohort design, we followed 27 544 women aged 29-49 years from baseline in 1991-1992. We collected data from an FFQ at baseline and body weight (BW) and waist circumference (WC) data both at baseline and at follow-up in 2003. We calculated the Mediterranean diet score (MDS, ranging from 0 to 9) and the Nordic diet score (NDS, ranging from 0 to 6). We used linear regression to examine the association between MDS and NDS (exposures) with subsequent BW change (ΔBW) and WC change (ΔWC) (outcomes) both continuously and categorically. Higher adherence to the MDS or NDS was not associated with ΔBW. The multivariable population average increment in BW was 0·03 kg (95 % CI -0·03, 0·09) per 1-point increase in MDS and 0·04 kg (95 % CI -0·02, 0·10) per 1-point increase in NDS. In addition, higher adherence to the MDS was not associated with ΔWC, with the multivariable population average increment per 1-point increase in MDS being 0·05 cm (95 % CI -0·03, 0·13). Higher adherence to the NDS was not significantly associated with gain in WC when adjusted for concurrent ΔBW. In conclusion, a higher adherence to the MDS or NDS was not associated with changes in average BW or WC in the present cohort followed for 12 years.

Greedy Sampling and Incremental Surrogate Model-Based Tailoring of Aeroservoelastic Model Database for Flexible Aircraft

NASA Technical Reports Server (NTRS)

Wang, Yi; Pant, Kapil; Brenner, Martin J.; Ouellette, Jeffrey A.

2018-01-01

This paper presents a data analysis and modeling framework to tailor and develop linear parameter-varying (LPV) aeroservoelastic (ASE) model database for flexible aircrafts in broad 2D flight parameter space. The Kriging surrogate model is constructed using ASE models at a fraction of grid points within the original model database, and then the ASE model at any flight condition can be obtained simply through surrogate model interpolation. The greedy sampling algorithm is developed to select the next sample point that carries the worst relative error between the surrogate model prediction and the benchmark model in the frequency domain among all input-output channels. The process is iterated to incrementally improve surrogate model accuracy till a pre-determined tolerance or iteration budget is met. The methodology is applied to the ASE model database of a flexible aircraft currently being tested at NASA/AFRC for flutter suppression and gust load alleviation. Our studies indicate that the proposed method can reduce the number of models in the original database by 67%. Even so the ASE models obtained through Kriging interpolation match the model in the original database constructed directly from the physics-based tool with the worst relative error far below 1%. The interpolated ASE model exhibits continuously-varying gains along a set of prescribed flight conditions. More importantly, the selected grid points are distributed non-uniformly in the parameter space, a) capturing the distinctly different dynamic behavior and its dependence on flight parameters, and b) reiterating the need and utility for adaptive space sampling techniques for ASE model database compaction. The present framework is directly extendible to high-dimensional flight parameter space, and can be used to guide the ASE model development, model order reduction, robust control synthesis and novel vehicle design of flexible aircraft.

Reported Prestroke Physical Activity Is Associated with Vascular Endothelial Growth Factor Expression and Good Outcomes after Stroke.

PubMed

López-Cancio, Elena; Ricciardi, Ana Clara; Sobrino, Tomás; Cortés, Jordi; de la Ossa, Natalia Pérez; Millán, Mónica; Hernández-Pérez, María; Gomis, Meritxell; Dorado, Laura; Muñoz-Narbona, Lucía; Campos, Francisco; Arenillas, Juan F; Dávalos, Antoni

2017-02-01

Physical activity (PhA) prior to stroke has been associated with good outcomes after the ischemic insult, but there is scarce data on the involved molecular mechanisms. We studied consecutive acute ischemic stroke patients admitted to a single tertiary stroke center. Prestroke PhA was evaluated with the International Physical Activity Questionnaire (metabolic equivalent of minutes/week). We studied several circulating angiogenic and neurogenic factors at different time points: vascular endothelial growth factor (VEGF), granulocyte colony-stimulating factor (G-CSF), and brain-derived neurotrophic factor (BDNF) at admission, day 7, and at 3 months. We considered good functional outcome at 3 months (modified Rankin scale  ≤ 2) as primary end point, and final infarct volume as secondary outcome. We studied 83 patients with at least 2 time point serum determinations (mean age 69.6 years, median National Institutes of Health Stroke Scale 17 at admission). Patients more physically active before stroke had a significantly higher increment of serum VEGF on the seventh day when compared to less active patients. This increment was an independent predictor of good functional outcome at 3 months and was associated with smaller infarct volume in multivariate analyses adjusted for relevant covariates. We did not find independent associations of G-CSF or BDNF levels neither with level of prestroke PhA nor with stroke outcomes. Although there are probably more molecular mechanisms by which PhA exerts its beneficial effects in stroke outcomes, our observation regarding the potential role of VEGF is plausible and in line with previous experimental studies. Further research in this field is needed. Copyright © 2017 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Outcomes after out-of-hospital cardiac arrest treated by basic vs advanced life support.

PubMed

Sanghavi, Prachi; Jena, Anupam B; Newhouse, Joseph P; Zaslavsky, Alan M

2015-02-01

Most out-of-hospital cardiac arrests receiving emergency medical services in the United States are treated by ambulance service providers trained in advanced life support (ALS), but supporting evidence for the use of ALS over basic life support (BLS) is limited. To compare the effects of BLS and ALS on outcomes after out-of-hospital cardiac arrest. Observational cohort study of a nationally representative sample of traditional Medicare beneficiaries from nonrural counties who experienced out-of-hospital cardiac arrest between January 1, 2009, and October 2, 2011, and for whom ALS or BLS ambulance services were billed to Medicare (31,292 ALS cases and 1643 BLS cases). Propensity score methods were used to compare the effects of ALS and BLS on patient survival, neurological performance, and medical spending after cardiac arrest. Survival to hospital discharge, to 30 days, and to 90 days; neurological performance; and incremental medical spending per additional survivor to 1 year. Survival to hospital discharge was greater among patients receiving BLS (13.1% vs 9.2% for ALS; 4.0 [95% CI, 2.3-5.7] percentage point difference), as was survival to 90 days (8.0% vs 5.4% for ALS; 2.6 [95% CI, 1.2-4.0] percentage point difference). Basic life support was associated with better neurological functioning among hospitalized patients (21.8% vs 44.8% with poor neurological functioning for ALS; 23.0 [95% CI, 18.6-27.4] percentage point difference). Incremental medical spending per additional survivor to 1 year for BLS relative to ALS was $154,333. Patients with out-of-hospital cardiac arrest who received BLS had higher survival at hospital discharge and at 90 days compared with those who received ALS and were less likely to experience poor neurological functioning.

Wetland Boundary Determination in the Great Dismal Swamp Using Weighted Averages

USGS Publications Warehouse

Carter, Virginia; Garrett, Mary Keith; Gammon, Patricia T.

1988-01-01

A weighted average method was used to analyze transition zone vegetation in the Great Dismal Swamp to determine if a more uniform determination of wetland boundaries can be made nationwide. The method was applied to vegetation data collected on four transects and three vertical layers across the wetland-to-upland transition zone of the swamp. Ecological index values based on water tolerance were either taken from the literature or derived from local species tolerances. Wetland index values were calculated for 25-m increments using species cover and rankings based on the ecological indices. Wetland index values were used to designate increments as either wetland, transitional, or upland, and to examine the usefulness of a provisional wetland-upland break-point. The weighted average method did not provide for an objective placement of an absolute wetland boundary, but did serve to focus attention on the transitional boundary zone where supplementary information is necessary to select a wetland-upland breakpoint.

Pharmacoeconomics of ruxolitinib therapy in patients with myelofibrosis.

PubMed

Vandewalle, Björn; Andreozzi, Valeska; Almeida, João; Félix, Jorge

2016-01-01

Overall survival (OS) and other important clinical trial end-points seem increasingly more elusive in supporting rapid and efficient incorporation of innovative cancer drugs in clinical practice. This study proposes a clinical trial based pharmacoeconomic framework to assess the therapeutic and economic value of ruxolitinib in patients with intermediate-2 or high-risk myelofibrosis. Individual patient level 144 week follow-up data from the COMFORT-II trial was used to account for the crossover effect on overall survival. Lifetime treatment benefits and costs were estimated considering detailed patterns of both ruxolitinib dose adjustments and blood transfusion needs. The authors estimate a 3.3 years increment in life expectancy (HR = 0.30; 95% CI = 0.17-0.55; p-value <0.001) and an incremental cost-effectiveness ratio of €40,000 per life year gained with the use of ruxolitinib. This study also demonstrates how valuable information from clinical trials can be used to support informed decisions about the early incorporation of innovative drugs.

Clinical Usefulness of Response Profiles to Rapidly Incremental Cardiopulmonary Exercise Testing

PubMed Central

Ramos, Roberta P.; Alencar, Maria Clara N.; Treptow, Erika; Arbex, Flávio; Ferreira, Eloara M. V.; Neder, J. Alberto

2013-01-01

The advent of microprocessed “metabolic carts” and rapidly incremental protocols greatly expanded the clinical applications of cardiopulmonary exercise testing (CPET). The response normalcy to CPET is more commonly appreciated at discrete time points, for example, at the estimated lactate threshold and at peak exercise. Analysis of the response profiles of cardiopulmonary responses at submaximal exercise and recovery, however, might show abnormal physiologic functioning which would not be otherwise unraveled. Although this approach has long been advocated as a key element of the investigational strategy, it remains largely neglected in practice. The purpose of this paper, therefore, is to highlight the usefulness of selected submaximal metabolic, ventilatory, and cardiovascular variables in different clinical scenarios and patient populations. Special care is taken to physiologically justify their use to answer pertinent clinical questions and to the technical aspects that should be observed to improve responses' reproducibility and reliability. The most recent evidence in favor of (and against) these variables for diagnosis, impairment evaluation, and prognosis in systemic diseases is also critically discussed. PMID:23766901

Spirituality predicts outcome independently of expectancy following flower essence self-treatment.

PubMed

Hyland, Michael E; Geraghty, Adam W A; Joy, Oliver E T; Turner, Scott I

2006-01-01

The aim of this study was to determine whether absorption and spirituality predict the placebo response independently of expectancy. This was an open study of self-treatment with self-selected Bach flower essences. Participants' expectancy of the effect of flower essences, attitudes to complementary medicine, holistic health beliefs, absorption, and spirituality were measured prior to treatment. One month after the start of treatment, participants responded to an e-mail enquiry about symptom change using a single seven-point change scale. One hundred sixteen participants (97 university undergraduates and 19 staff) completed all assessments. Spirituality and absorption together predicted additional variance compared with a cluster of expectancy measures comprising expectancy, attitude to complementary medicine, and holistic beliefs (increment in R(2)=.042, P=.032), and spirituality alone (but not absorption alone) predicted more additional variance than did the expectancy cluster (increment in R(2)=.043, P=.014). Our data are inconsistent with conventional explanations for the placebo effect. The mechanism underlying the placebo response is not fully understood.

The cultural evolution of democracy: saltational changes in a political regime landscape.

PubMed

Lindenfors, Patrik; Jansson, Fredrik; Sandberg, Mikael

2011-01-01

Transitions to democracy are most often considered the outcome of historical modernization processes. Socio-economic changes, such as increases in per capita GNP, education levels, urbanization and communication, have traditionally been found to be correlates or 'requisites' of democratic reform. However, transition times and the number of reform steps have not been studied comprehensively. Here we show that historically, transitions to democracy have mainly occurred through rapid leaps rather than slow and incremental transition steps, with a median time from autocracy to democracy of 2.4 years, and overnight in the reverse direction. Our results show that autocracy and democracy have acted as peaks in an evolutionary landscape of possible modes of institutional arrangements. Only scarcely have there been slow incremental transitions. We discuss our results in relation to the application of phylogenetic comparative methods in cultural evolution and point out that the evolving unit in this system is the institutional arrangement, not the individual country which is instead better regarded as the 'host' for the political system.

Renal Replacement Therapy and Incremental Hemodialysis for Veterans with Advanced Chronic Kidney Disease

PubMed Central

Kalantar-Zadeh, Kamyar; Crowley, Susan T.; Beddhu, Srinivasan; Chen, Joline LT; Daugirdas, John T; Goldfarb, David S.; Jin, Anna; Kovesdy, Csaba P.; Leehey, David J.; Moradi, Hamid; Navaneethan, Sankar D; Norris, Keith C; Obi, Yoshitsugu; O’Hare, Ann; Shafi, Tariq; Streja, Elani; Unruh, Mark L.; Vachharajani, Tushar; Weisbord, Steven; Rhee, Connie M.

2017-01-01

Each year approximately 13,000 Veterans transition to maintenance dialysis, mostly in the traditional form of thrice-weekly hemodialysis from the start. Among >6,000 dialysis units nationwide, there are currently approximately 70 Veterans Affairs (VA) dialysis centers. Given this number of VA dialysis centers and their limited capacity, only 10% of all incident dialysis Veterans initiate treatment in a VA center. Evidence suggests that, among Veterans, receipt of care within the VA system is associated with favorable outcomes, potentially due to enhanced access to healthcare resources. Data from the United States Renal Data System Special Study Center “Transition-of-Care-in-CKD” suggest that Veterans who receive dialysis in a VA unit exhibit greater survival compared to non-VA centers. Substantial financial expenditures arise from the high volume of outsourced care and higher dialysis reimbursement paid by the VA than by Medicare to outsourced providers. Given the exceedingly high mortality and abrupt decline in residual kidney function (RKF) in the first dialysis year, it is possible that incremental transition to dialysis through an initial twice-weekly hemodialysis regimen preserves RKF, prolongs vascular access longevity, improves patients’ quality of life, and is a more patient-centered approach and consistent with “personalized” dialysis. Broad implementation of incremental dialysis may also result in more Veterans receiving care within a VA dialysis unit. Controlled trials are urgently needed to examine safety and efficacy of incremental hemodialysis in Veterans and other populations, and the administrative and health care as well as provider structure within the VA system would facilitate the performance of such trials. PMID:28421638

Planar isotropy of passive scalar turbulent mixing with a mean perpendicular gradient.

PubMed

Danaila, L; Dusek, J; Le Gal, P; Anselmet, F; Brun, C; Pumir, A

1999-08-01

A recently proposed evolution equation [Vaienti et al., Physica D 85, 405 (1994)] for the probability density functions (PDF's) of turbulent passive scalar increments obtained under the assumptions of fully three-dimensional homogeneity and isotropy is submitted to validation using direct numerical simulation (DNS) results of the mixing of a passive scalar with a nonzero mean gradient by a homogeneous and isotropic turbulent velocity field. It is shown that this approach leads to a quantitatively correct balance between the different terms of the equation, in a plane perpendicular to the mean gradient, at small scales and at large Péclet number. A weaker assumption of homogeneity and isotropy restricted to the plane normal to the mean gradient is then considered to derive an equation describing the evolution of the PDF's as a function of the spatial scale and the scalar increments. A very good agreement between the theory and the DNS data is obtained at all scales. As a particular case of the theory, we derive a generalized form for the well-known Yaglom equation (the isotropic relation between the second-order moments for temperature increments and the third-order velocity-temperature mixed moments). This approach allows us to determine quantitatively how the integral scale properties influence the properties of mixing throughout the whole range of scales. In the simple configuration considered here, the PDF's of the scalar increments perpendicular to the mean gradient can be theoretically described once the sources of inhomogeneity and anisotropy at large scales are correctly taken into account.

A non-ideal model for predicting the effect of dissolved salt on the flash point of solvent mixtures.

PubMed

Liaw, Horng-Jang; Wang, Tzu-Ai

2007-03-06

Flash point is one of the major quantities used to characterize the fire and explosion hazard of liquids. Herein, a liquid with dissolved salt is presented in a salt-distillation process for separating close-boiling or azeotropic systems. The addition of salts to a liquid may reduce fire and explosion hazard. In this study, we have modified a previously proposed model for predicting the flash point of miscible mixtures to extend its application to solvent/salt mixtures. This modified model was verified by comparison with the experimental data for organic solvent/salt and aqueous-organic solvent/salt mixtures to confirm its efficacy in terms of prediction of the flash points of these mixtures. The experimental results confirm marked increases in liquid flash point increment with addition of inorganic salts relative to supplementation with equivalent quantities of water. Based on this evidence, it appears reasonable to suggest potential application for the model in assessment of the fire and explosion hazard for solvent/salt mixtures and, further, that addition of inorganic salts may prove useful for hazard reduction in flammable liquids.

Variance change point detection for fractional Brownian motion based on the likelihood ratio test

NASA Astrophysics Data System (ADS)

Kucharczyk, Daniel; Wyłomańska, Agnieszka; Sikora, Grzegorz

2018-01-01

Fractional Brownian motion is one of the main stochastic processes used for describing the long-range dependence phenomenon for self-similar processes. It appears that for many real time series, characteristics of the data change significantly over time. Such behaviour one can observe in many applications, including physical and biological experiments. In this paper, we present a new technique for the critical change point detection for cases where the data under consideration are driven by fractional Brownian motion with a time-changed diffusion coefficient. The proposed methodology is based on the likelihood ratio approach and represents an extension of a similar methodology used for Brownian motion, the process with independent increments. Here, we also propose a statistical test for testing the significance of the estimated critical point. In addition to that, an extensive simulation study is provided to test the performance of the proposed method.

A table of intensity increments.

DOT National Transportation Integrated Search

1966-01-01

Small intensity increments can be produced by adding larger intensity increments. A table is presented covering the range of small intensity increments from 0.008682 through 6.020 dB in 60 large intensity increments of 1 dB.

D Reconstruction with a Collaborative Approach Based on Smartphones and a Cloud-Based Server

NASA Astrophysics Data System (ADS)

Nocerino, E.; Poiesi, F.; Locher, A.; Tefera, Y. T.; Remondino, F.; Chippendale, P.; Van Gool, L.

2017-11-01

The paper presents a collaborative image-based 3D reconstruction pipeline to perform image acquisition with a smartphone and geometric 3D reconstruction on a server during concurrent or disjoint acquisition sessions. Images are selected from the video feed of the smartphone's camera based on their quality and novelty. The smartphone's app provides on-the-fly reconstruction feedback to users co-involved in the acquisitions. The server is composed of an incremental SfM algorithm that processes the received images by seamlessly merging them into a single sparse point cloud using bundle adjustment. Dense image matching algorithm can be lunched to derive denser point clouds. The reconstruction details, experiments and performance evaluation are presented and discussed.

Equilibrium Configurations of a Fiber in a Flow

NASA Astrophysics Data System (ADS)

Guerron, Pamela; Berghout, Christopher; Nita, Bogdan; Vaidya, Ashwin

2013-11-01

The aim of this study is to understand the coupled dynamics of flexible fibers in a fluid flow. In particular, we examine the equilibrium configurations of the fiber with changing Reynolds numbers, orientations and lengths of the fiber. Our study is motivated by biological phenomena such as ciliary bending, flexing of plants and trees in winds etc. Our approach to resolving this problem has been threefold: experimental, numerical and theoretical. In our experiments we create physical models of variable length fibers inserted into a basal body structure, which is then suspended in a flow tank and positioned at different angles. The structure (fibers) are subjected to different velocities of water flow, ranging from 0m/s to 0.53 m/s in increments of 0.038 m/s. The results of the experiment were analyzed using Adobe Photoshop and the effect of the above mentioned parameters upon the shape of the fiber is analyzed. In addition, we also simulate this problem using the software Comsol and also create a simple, toy mathematical model incorporating the competing effects of tension and fluid drag on the fiber to obtain a closed form expression. Our various approaches point to consistent results.

Mathematical models frame environmental dispute [Review of the article Useless arithmetic: Ten points to ponder when using mathematical models in environmental decision making

USGS Publications Warehouse

Lamb, Berton Lee; Burkardt, Nina

2008-01-01

When Linda Pilkey- Jarvis and Orrin Pilkey state in their article, "Useless Arithmetic," that "mathematical models are simplified, generalized representations of a process or system," they probably do not mean to imply that these models are simple. Rather, the models are simpler than nature and that is the heart of the problem with predictive models. We have had a long professional association with the developers and users of one of these simplifications of nature in the form of a mathematical model known as Physical Habitat Simulation (PHABSIM), which is part of the Instream Flow Incremental Methodology (IFIM). The IFIM is a suite of techniques, including PHABSIM, that allows the analyst to incorporate hydrology , hydraulics, habitat, water quality, stream temperature, and other variables into a tradeoff analysis that decision makers can use to design a flow regime to meet management objectives (Stalnaker et al. 1995). Although we are not the developers of the IFIM, we have worked with those who did design it, and we have tried to understand how the IFIM and PHABSIM are actually used in decision making (King, Burkardt, and Clark 2006; Lamb 1989).

Improving Stochastic Communication Network Performance: Reliability vs. Throughput

DTIC Science & Technology

1991-12-01

increased to one. 2) arc survivabil.. ities will be increased in increments of one tenths. and 3) the costs to increase- arc si’rvivabilities were equal and...This reliability value is leni used to maximize the associated expected flow. For Net work A. a bIdget of (8)() pro(duces a tradcoff point at (.58.37...Network B for a buidgel of 2000 which allows a nel \\\\ork relial)ilitv of one to be achieved and a bidget of 1200 which allows for ;, maximum 57

Aircraft Modifications: Assessing the Current State of Air Force Aircraft Modifications and the Implications for Future Military Capability

DTIC Science & Technology

2007-01-25

Air, Space , and Cyberspace." Introduction 3 group production lots together into ’spirals’ or ’increments’. These groupings, as well as an increased...important reference point for this work. The analysis of the modification process presented in this reserach , however, does help shed light on the...planning efforts. Chapter 7- The Future of Aircraft Modifications "Strategy is the art of making use of time and space . I am less concerned about the

Entropy Change for the Irreversible Heat Transfer between Two Finite Objects

DTIC Science & Technology

2015-06-10

independent heat capacities. Another interesting aspect of this problem is to compute the entropy change during the process. Textbooks typically only...case where the two objects have unequal heat capacities, both of which are finite. (From a calculus point of view, each time an increment of heat dQ is...Theory, and Statistical Thermodynamics 3rd edn (Reading MA: Addison-Wesley) ch 5 [3] Larson R and Edwards B 2014 Calculus 10th edn (Boston MA: Brooks

Best Practices in Supplier Relationship Management and Their Early Implementation in the Air Force Materiel Command

DTIC Science & Technology

2012-01-01

information-sharing and through systematic efforts to develop the supplier. These efforts can be direct involvement activities, such as kaizen events,24 24...Womack and Jones (1996) define kaizen as “Continuous, incremental improvement of an activity to create more value with less muda. Also called point... kaizen and process kaizen .” They define muda as “any activity that consumes resources but creates no value,” i.e., waste. Figure 2.2 Krause and

The social costs of nitrogen

PubMed Central

Keeler, Bonnie L.; Gourevitch, Jesse D.; Polasky, Stephen; Isbell, Forest; Tessum, Chris W.; Hill, Jason D.; Marshall, Julian D.

2016-01-01

Despite growing recognition of the negative externalities associated with reactive nitrogen (N), the damage costs of N to air, water, and climate remain largely unquantified. We propose a comprehensive approach for estimating the social cost of nitrogen (SCN), defined as the present value of the monetary damages caused by an incremental increase in N. This framework advances N accounting by considering how each form of N causes damages at specific locations as it cascades through the environment. We apply the approach to an empirical example that estimates the SCN for N applied as fertilizer. We track impacts of N through its transformation into atmospheric and aquatic pools and estimate the distribution of associated costs to affected populations. Our results confirm that there is no uniform SCN. Instead, changes in N management will result in different N-related costs depending on where N moves and the location, vulnerability, and preferences of populations affected by N. For example, we found that the SCN per kilogram of N fertilizer applied in Minnesota ranges over several orders of magnitude, from less than $0.001/kg N to greater than $10/kg N, illustrating the importance of considering the site, the form of N, and end points of interest rather than assuming a uniform cost for damages. Our approach for estimating the SCN demonstrates the potential of integrated biophysical and economic models to illuminate the costs and benefits of N and inform more strategic and efficient N management. PMID:27713926

Four Brown Dwarfs in the Taurus Star-Forming Region

NASA Astrophysics Data System (ADS)

Martín, E. L.; Dougados, C.; Magnier, E.; Ménard, F.; Magazzù, A.; Cuillandre, J.-C.; Delfosse, X.

2001-11-01

We have identified four brown dwarfs in the Taurus star-forming region. They were first selected from R and I CCD photometry of 2.29 deg2 obtained at the Canada-France-Hawaii Telescope. Subsequently, they were recovered in the Two Micron All Sky Survey second incremental data release point source catalog. Low-resolution optical spectra obtained at the William Herschel Telescope allow us to derive spectral types in the range M7-M9. One of the brown dwarfs has very strong Hα emission (EW=-340 Å). It also displays Brγ emission in an infrared spectrum obtained with the Infrared Camera and Spectrograph on the Subaru telescope, suggesting that it is accreting matter from a disk. The K I resonance doublet and the Na I subordinate doublet at 818.3 and 819.5 nm in these Taurus objects are weaker than in field dwarfs of similar spectral type, consistent with low surface gravities as expected for young brown dwarfs. Two of the objects are cooler and fainter than GG Tau Bb, the lowest mass known member of the Taurus association. We estimate masses of only 0.03 Msolar for them. The spatial distribution of brown dwarfs in Taurus hints at a possible anticorrelation between the density of stars and the density of brown dwarfs. Based on data collected at the Canada-France-Hawaii Telescope and the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

[Dental arch form reverting by four-point method].

PubMed

Pan, Xiao-Gang; Qian, Yu-Fen; Weng, Si-En; Feng, Qi-Ping; Yu, Quan

2008-04-01

To explore a simple method of reverting individual dental arch form template for wire bending. Individual dental arch form was reverted by four-point method. By defining central point of bracket on bilateral lower second premolar and first molar, certain individual dental arch form could be generated. The arch form generating procedure was then be developed to computer software for printing arch form. Four-point method arch form was evaluated by comparing with direct model measurement on linear and angular parameters. The accuracy and reproducibility were assessed by paired t test and concordance correlation coefficient with Medcalc 9.3 software package. The arch form by four-point method was of good accuracy and reproducibility (linear concordance correlation coefficient was 0.9909 and angular concordance correlation coefficient was 0.8419). The dental arch form reverted by four-point method could reproduce the individual dental arch form.

48 CFR 3452.232-71 - Incremental funding.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 7 2013-10-01 2012-10-01 true Incremental funding. 3452....232-71 Incremental funding. As prescribed in 3432.705-2, insert the following provision in solicitations if a cost-reimbursement contract using incremental funding is contemplated: Incremental Funding...

48 CFR 3452.232-71 - Incremental funding.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 7 2014-10-01 2014-10-01 false Incremental funding. 3452....232-71 Incremental funding. As prescribed in 3432.705-2, insert the following provision in solicitations if a cost-reimbursement contract using incremental funding is contemplated: Incremental Funding...

48 CFR 3452.232-71 - Incremental funding.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Incremental funding. 3452....232-71 Incremental funding. As prescribed in 3432.705-2, insert the following provision in solicitations if a cost-reimbursement contract using incremental funding is contemplated: Incremental Funding...

48 CFR 3452.232-71 - Incremental funding.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Incremental funding. 3452....232-71 Incremental funding. As prescribed in 3432.705-2, insert the following provision in solicitations if a cost-reimbursement contract using incremental funding is contemplated: Incremental Funding...

Classification by Using Multispectral Point Cloud Data

NASA Astrophysics Data System (ADS)

Liao, C. T.; Huang, H. H.

2012-07-01

Remote sensing images are generally recorded in two-dimensional format containing multispectral information. Also, the semantic information is clearly visualized, which ground features can be better recognized and classified via supervised or unsupervised classification methods easily. Nevertheless, the shortcomings of multispectral images are highly depending on light conditions, and classification results lack of three-dimensional semantic information. On the other hand, LiDAR has become a main technology for acquiring high accuracy point cloud data. The advantages of LiDAR are high data acquisition rate, independent of light conditions and can directly produce three-dimensional coordinates. However, comparing with multispectral images, the disadvantage is multispectral information shortage, which remains a challenge in ground feature classification through massive point cloud data. Consequently, by combining the advantages of both LiDAR and multispectral images, point cloud data with three-dimensional coordinates and multispectral information can produce a integrate solution for point cloud classification. Therefore, this research acquires visible light and near infrared images, via close range photogrammetry, by matching images automatically through free online service for multispectral point cloud generation. Then, one can use three-dimensional affine coordinate transformation to compare the data increment. At last, the given threshold of height and color information is set as threshold in classification.

Rapid video-referenced ratings of reciprocal social behavior in toddlers: A twin study

PubMed Central

Marrus, Natasha; Glowinski, Anne L.; Jacob, Theodore; Klin, Ami; Jones, Warren; Drain, Caroline E.; Holzhauer, Kieran E.; Hariprasad, Vaishnavi; Fitzgerald, Rob T.; Mortenson, Erika L.; Sant, Sayli M.; Cole, Lyndsey; Siegel, Satchel A.; Zhang, Yi; Agrawal, Arpana; Heath, Andrew; Constantino, John N.

2015-01-01

Background Reciprocal social behavior (RSB) is a developmental prerequisite for social competency, and deficits in RSB constitute a core feature of autism spectrum disorder (ASD). Although clinical screeners categorically ascertain risk of ASD in early childhood, rapid methods for quantitative measurement of RSB in toddlers are not yet established. Such measurements are critical for tracking developmental trajectories and incremental responses to intervention. Methods We developed and validated a 20-minute video-referenced rating scale, the video-referenced rating of reciprocal social behavior (vrRSB), for untrained caregivers to provide standardized ratings of quantitative variation in RSB. Parents of 252 toddler twins [Monozygotic (MZ)=31 pairs, Dizygotic (DZ)=95 pairs] ascertained through birth records, rated their twins’ RSB at two time points, on average 6 months apart, and completed two developmental measures, the Modified Checklist for Autism in Toddlers (M-CHAT) and the MacArthur Communicative Development Inventory Short Form (MCDI-s). Results Scores on the vrRSB were fully continuously distributed, with excellent 6-month test-retest reliability ([intraclass correlation coefficient] ICC=0.704, p<0.000). MZ twins displayed markedly greater trait concordance than DZ twins, (MZ ICC=0.863, p<0.000, DZ ICC=0.231, p<0.012). VrRSB score distributions were highly distinct for children passing versus failing the M-CHAT (t=−8.588, df=31, p<.000), incrementally improved from 18-24 months, and were inversely correlated with receptive and expressive vocabulary on the MCDI-s. Conclusions Like quantitative autistic trait ratings in school-aged children and adults, toddler scores on the vrRSB are continuously distributed and appear highly heritable. These ratings exhibited minimal measurement error, high inter-individual stability, and developmental progression in RSB as children matured from 18-24 months, supporting their potential utility for serially quantifying the severity of early autistic syndromes over time and in response to intervention. In addition, these findings inform the genetic-environmental structure of RSB in early typical development. PMID:25677414

Health care resource use, health care expenditures and absenteeism costs associated with osteoarthritis in US healthcare system.

PubMed

Menon, J; Mishra, P

2018-04-01

We determined incremental health care resource utilization, incremental health care expenditures, incremental absenteeism, and incremental absenteeism costs associated with osteoarthritis. Medical Expenditure Panel Survey (MEPS) for 2011 was used as data source. Individuals 18 years or older and employed during 2011 were eligible for inclusion in the sample for analyses. Individuals with osteoarthritis were identified based on ICD-9-CM codes. Incremental health care resource utilization included annual hospitalization, hospital days, emergency room visits and outpatient visits. Incremental health expenditures included annual inpatient, outpatient, emergency room, medications, miscellaneous and annual total expenditures. Of the total sample, 1354 were diagnosed with osteoarthritis, and compared to non osteoarthritis individuals. Incremental resource utilization, expenditures, absenteeism and absenteeism costs were estimated using regression models, adjusting for age, gender, sex, region, marital status, insurance coverage, comorbidities, anxiety, asthma, hypertension and hyperlipidemia. Regression models revealed incremental mean annual resource use associated with osteoarthritis of 0.07 hospitalizations, equal to 70 additional hospitalizations per 100 osteoarthritic patients annually, and 3.63 outpatient visits, equal to 363 additional visits per 100 osteoarthritic patients annually. Mean annual incremental total expenditures associated with osteoarthritis were $2046. Annually, mean incremental expenditures were largest for inpatient expenditures at $826, followed by mean incremental outpatient expenditures of $659, and mean incremental medication expenditures of $325. Mean annual incremental absenteeism was 2.2 days and mean annual incremental absenteeism costs were $715.74. Total direct expenditures were estimated at $41.7 billion. Osteoarthritis was associated with significant incremental health care resource utilization, expenditures, absenteeism and absenteeism costs. Copyright © 2017 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Health-related quality of life (HRQL) for individuals with self-reported chronic physical and/or mental health conditions: panel survey of an adult sample in the United States

PubMed Central

2012-01-01

Background In the US, approximately 53% of adults have at least one chronic condition. Comorbid physical and mental health conditions often have an incremental negative impact on health-related quality of life (HRQL). Primary study objectives were to quantify the impact on HRQL of a) ≥ 1 physical condition , b) ≥ 1 comorbid mental health conditions added to a physical one, c) ≥ 1 mental health condition, and d) ≥ 1 comorbid physical conditions added to at least one related to mental health. Decrements were based on a “Healthy” reference group reporting no chronic conditions. Methods Participants were sampled (n = 3877) from the US adult population as part of a 2009 normative survey. Demographics, number/ type of chronic conditions, and HRQL data were self-reported. HRQL was defined through SF-36v2® Physical Component Summary (PCS) scores and Mental Component Summary (MCS) scores. Participant “morbidity” groupings included Healthy; Physical Health Condition only, Mental Health Condition only, and Physical and Mental Health (Comorbid). PCS and MCS scores were also analyzed by physical disease clusters (e.g., cardiovascular, gastrointestinal). Multivariate regression models were used for all analyses. Results 81% of participants were Caucasian; 9% African American. Males and females were about equally represented; 63% were ≥ 45 years old. The average number of reported chronic conditions was 2.4 (SD = 2.4). Relative to the Healthy group, the Physical Condition group scored 6.4 (males) and 7.5 (females) points lower on PCS. The addition of a comorbid mental health condition resulted in a total reduction of 11 points in PCS and 15 points in MCS. Compared to the Healthy group, ≥ 1 mental health conditions was associated with MCS decrements of 11–12 points. A physical comorbidity led to additional decrements of 3–4 points for MCS, with a total of 15 points. Incremental HRQL burden defined by both MCS and PCS scores was relatively similar across the 5 defined physical disease clusters. Conclusion Results provide quantitative information for US adults on specific PCS and MCS score decrements associated with a comorbid condition related to mental health, as well as a comorbid condition related to physical health. PMID:23253258

Refining Inquiry with Multi-Form Assessment: Formative and Summative Assessment Functions for Flexible Inquiry

ERIC Educational Resources Information Center

Zuiker, Steven; Whitaker, J. Reid

2014-01-01

This paper describes the 5E+I/A inquiry model and reports a case study of one curricular enactment by a US fifth-grade classroom. A literature review establishes the model's conceptual adequacy with respect to longstanding research related to both the 5E inquiry model and multiple, incremental innovations of it. As a collective line of research,…

76 FR 64059 - Air Quality: Revision to Definition of Volatile Organic Compounds-Exclusion of trans-1,3,3,3...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... form of encryption, and be free of any defects or viruses. For additional information about the EPA's... k OH ) with the hydroxyl radical (OH); (ii) the maximum incremental reactivities (MIR) of ethane and... metrics are discussed below. The k OH is the reaction rate constant of the compound with the OH radical in...

77 FR 16981 - Air Quality: Revision to Definition of Volatile Organic Compounds-Exclusion of a Group of Four...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For... reaction rate constant (known as k OH ) with the hydroxyl radical (OH); (ii) the maximum incremental... with the OH radical in the air. This reaction is typically the first step in a series of chemical...

Direct solar radiation on various slopes from 0 to 60 degrees north latitude.

Treesearch

John Buffo; Leo J. Fritschen; James L. Murphy

1972-01-01

Direct beam solar radiation is presented in graphical and tabular form for hourly, daily, and yearly values for seven slopes on each of 16 aspects from the Equator to 60 degrees north in 10-degree increments. Theoretical equations necessary for the calculations are given. Solar altitude and azimuth during the day and year are also presented for the same latitude.

How Do Work Stress and Coping Work? Toward a Fundamental Theoretical Reappraisal

ERIC Educational Resources Information Center

Briner, Rob B.; Harris, Claire; Daniels, Kevin

2004-01-01

The main aim of this paper is to make the case for why a fundamental reappraisal rather than incremental development of work stress and coping theory is required. In order to do this we present, in simplified form, some of the basic tenets of theory in this field. These tenets are questioned and their limitations identified in two ways. The first…

Small Diameter Bomb Increment II (SDB II)

DTIC Science & Technology

2013-12-01

in 2013: Electromagnetic Environments and Effects and Hazards of Electromagnetic Radiation to Ordnance . Reliability Growth Testing started in June...unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 SDB II December 2013 SAR April 16, 2014 17:24:29...Framework EMC - Electromagnetic Compatibility EMI - Electromagnetic Interference GESP - GIG Enterprise Service Profiles GIG - Global Information Grid i.e

Optimal Output of Distributed Generation Based On Complex Power Increment

NASA Astrophysics Data System (ADS)

Wu, D.; Bao, H.

2017-12-01

In order to meet the growing demand for electricity and improve the cleanliness of power generation, new energy generation, represented by wind power generation, photovoltaic power generation, etc has been widely used. The new energy power generation access to distribution network in the form of distributed generation, consumed by local load. However, with the increase of the scale of distribution generation access to the network, the optimization of its power output is becoming more and more prominent, which needs further study. Classical optimization methods often use extended sensitivity method to obtain the relationship between different power generators, but ignore the coupling parameter between nodes makes the results are not accurate; heuristic algorithm also has defects such as slow calculation speed, uncertain outcomes. This article proposes a method called complex power increment, the essence of this method is the analysis of the power grid under steady power flow. After analyzing the results we can obtain the complex scaling function equation between the power supplies, the coefficient of the equation is based on the impedance parameter of the network, so the description of the relation of variables to the coefficients is more precise Thus, the method can accurately describe the power increment relationship, and can obtain the power optimization scheme more accurately and quickly than the extended sensitivity method and heuristic method.

Effect of the insertion and polymerization technique in composite resin restorations: analysis of marginal gap by atomic force microscopy.

PubMed

da Silva, Marcos Aurélio Bomfim; de Oliveira, Guilherme José Pimentel Lopes; Tonholo, Josealdo; Júnior, José Ginaldo da Silva; Santos, Lucineide de Melo; Dos Reis, José Ivo Limeira

2010-12-01

This in vitro study evaluated the marginal gap at the composite tooth/resin interface in class V cavities under the influence of two insertion techniques and a curing system by means of atomic force microscopy (AFM). Forty enamel and dentin cavities were prepared on the buccal surface in bovine teeth with quadratic forms measuring 2 mm × 2 mm and depth of 1.5 mm. The teeth were then divided into four groups: group A, 10 cavities were restored in one increment, light cured by halogen light; group B, 10 cavities filled with bulk filling, light cured by the light emitting diodes (LED); group C, 10 cavities were restored by the incremental technique, light cured by halogen light; group D, 10 cavities were restored by the incremental technique, light cured by the LED. The teeth underwent the polishing procedure and were analyzed by AFM for tooth/restoration interface evaluation. The data were compared between groups using the nonparametric Kruskall-Wallis and Mann-Whitney tests (p < 0.05). The results showed a statistically significant difference between groups A and B and groups A and C. It was concluded that no insertion and polymerization technique was able to completely seal the cavity.

Incremental Implicit Learning of Bundles of Statistical Patterns

PubMed Central

Qian, Ting; Jaeger, T. Florian; Aslin, Richard N.

2016-01-01

Forming an accurate representation of a task environment often takes place incrementally as the information relevant to learning the representation only unfolds over time. This incremental nature of learning poses an important problem: it is usually unclear whether a sequence of stimuli consists of only a single pattern, or multiple patterns that are spliced together. In the former case, the learner can directly use each observed stimulus to continuously revise its representation of the task environment. In the latter case, however, the learner must first parse the sequence of stimuli into different bundles, so as to not conflate the multiple patterns. We created a video-game statistical learning paradigm and investigated 1) whether learners without prior knowledge of the existence of multiple “stimulus bundles” — subsequences of stimuli that define locally coherent statistical patterns — could detect their presence in the input, and 2) whether learners are capable of constructing a rich representation that encodes the various statistical patterns associated with bundles. By comparing human learning behavior to the predictions of three computational models, we find evidence that learners can handle both tasks successfully. In addition, we discuss the underlying reasons for why the learning of stimulus bundles occurs even when such behavior may seem irrational. PMID:27639552

Method for forming a solar array strip

NASA Technical Reports Server (NTRS)

Mueller, R. I.; Yasui, R. K. (Inventor)

1979-01-01

A flexible solar array strip is formed by a method which lends itself to automatic production techniques. Solder pads are deposited on printed circuitry deposited on a flexible structure. The resultant substrate is stored on a drum from which it is withdrawn and incrementally advanced along a linear path. Solderless solar cells are serially transported into engagement with the pads which are then heated in order to attach the cells to the circuitry. Excess flux is cleaned from the cells which are encapsulated in a protective coating. The resultant array is then spirally wound on a drum.

Risk Tradeoffs in Adaptive Ecosystem Management: The Case of the U.S. Forest Service

NASA Astrophysics Data System (ADS)

Stern, Marc J.; Martin, Caysie A.; Predmore, S. Andrew; Morse, Wayde C.

2014-06-01

Natural resource planning processes on public lands in the United States are driven in large part by the requirements of the National Environmental Policy Act (NEPA), which dictates general processes for analyzing and disclosing the likely impacts of proposed actions. The outcomes of these processes are the result of multiple factors, many related to the manifold smaller incremental decisions made by agency personnel directing the processes. Through interviews with decision makers, team leaders, and team members on five NEPA processes within the U.S. Forest Service, this study examines those incremental decisions. Risk, in particular external relationship risk, emerged as a dominant lens through which agency personnel weigh and make process-related decisions. We discuss the tradeoffs associated with agency actors' emphasis on this form of risk and their potential implications for adaptive ecosystem management and organizational performance.

Nanofluid based on self-nanoencapsulated metal/metal alloys phase change materials with tuneable crystallisation temperature.

PubMed

Navarrete, Nuria; Gimeno-Furio, Alexandra; Mondragon, Rosa; Hernandez, Leonor; Cabedo, Luis; Cordoncillo, Eloisa; Julia, J Enrique

2017-12-14

Nanofluids using nanoencapsulated Phase Change Materials (nePCM) allow increments in both the thermal conductivity and heat capacity of the base fluid. Incremented heat capacity is produced by the melting enthalpy of the nanoparticles core. In this work two important advances in this nanofluid type are proposed and experimentally tested. It is firstly shown that metal and metal alloy nanoparticles can be used as self-encapsulated nePCM using the metal oxide layer that forms naturally in most commercial synthesis processes as encapsulation. In line with this, Sn/SnOx nanoparticles morphology, size and thermal properties were studied by testing the suitability and performance of encapsulation at high temperatures and thermal cycling using a commercial thermal oil (Therminol 66) as the base fluid. Secondly, a mechanism to control the supercooling effect of this nePCM type based on non-eutectic alloys was developed.

Morphology of residually stressed tubular tissues: Beyond the elastic multiplicative decomposition

NASA Astrophysics Data System (ADS)

Ciarletta, P.; Destrade, M.; Gower, A. L.; Taffetani, M.

2016-05-01

Many interesting shapes appearing in the biological world are formed by the onset of mechanical instability. In this work we consider how the build-up of residual stress can cause a solid to buckle. In all past studies a fictitious (virtual) stress-free state was required to calculate the residual stress. In contrast, we use a model which is simple and allows the prescription of any residual stress field. We specialize the analysis to an elastic tube subject to a two-dimensional residual stress, and find that incremental wrinkles can appear on its inner or its outer face, depending on the location of the highest value of the residual hoop stress. We further validate the predictions of the incremental theory with finite element simulations, which allow us to go beyond this threshold and predict the shape, number and amplitude of the resulting creases.

Multicriteria mapping of stakeholder preferences in regulating nanotechnology

NASA Astrophysics Data System (ADS)

Hansen, Steffen Foss

2010-08-01

In order to facilitate stakeholder discussions on how to regulate nanotechnology, the opensource program multicriteria mapping (MCM) was used to structure 26 interviews with stakeholders in the USA. MCM offers a systematic part quantitative, part qualitative approach to clarify why some regulatory options (bans, moratoriums, voluntary measures, etc.) were deemed to be acceptable/unacceptable by various stakeholders and which criteria stakeholders used to evaluate the different regulatory options. Adopting an incremental approach and implementing a new regulatory framework was evaluated as the best options whereas a complete ban and no additional regulation of nanotechnology were found to be the least favorable. Criteria applied differed substantially among stakeholders and included social, ethical, regulatory, environmental, and health issues. Opinions on future regulation seem far less polarized than expected and it seems that stakeholders would welcome a combination of voluntary measures, an incremental approach and forming of a new regulatory framework.

Straight and chopped dc performance data for a Prestolite MTC-4001 motor and a general electric EV-1 controller

NASA Technical Reports Server (NTRS)

Edie, P. C.

1981-01-01

Performance data on the Prestolite MTC-4001 series wound dc motor and General Electric EV-1 Chopper Controller is supplied for the electric vehicle manufacturer. Data are provided for both straight and chopped dc input to the motor, at 2 motor temperature levels. Testing was done at 6 voltage increments to the motor, and 2 voltage increments to the controller. Data results are presented in both tabular and graphical forms. Tabular information includes motor voltage and current input data, motor speed and torque output data, power data and temperature data. Graphical information includes torque-speed, motor power output-speed, torque-current, and efficiency-speed plots under the various operating conditions. The data resulting from this testing show the speed-torque plots to have the most variance with operating temperature. The maximum motor efficiency is between 76% and 82%, regardless of temperature or mode of operation.

A status report on the characterization of the microgravity environment of the International Space Station

NASA Technical Reports Server (NTRS)

Jules, Kenol; McPherson, Kevin; Hrovat, Kenneth; Kelly, Eric; Reckart, Timothy

2004-01-01

A primary objective of the International Space Station is to provide a long-term quiescent environment for the conduct of scientific research for a variety of microgravity science disciplines. Since continuous human presence on the space station began in November 2000 through the end of Increment-6, over 1260 hours of crew time have been allocated to research. However, far more research time has been accumulated by experiments controlled on the ground. By the end of the time period covered by this paper (end of Increment-6), the total experiment hours performed on the station are well over 100,000 hours (Expedition 6 Press Kit: Station Begins Third Year of Human Occupation, Boeing/USA/NASA, October 25, 2002). This paper presents the results of the on-going effort by the Principal Investigator Microgravity Services project, at NASA Glenn Research Center, in Cleveland, Ohio, to characterize the microgravity environment of the International Space Station in order to keep the microgravity scientific community apprised of the reduced gravity environment provided by the station for the performance of space experiments. This paper focuses on the station microgravity environment for Increments 5 and 6. During that period over 580 Gbytes of acceleration data were collected, out of which over 34,790 hours were analyzed. The results presented in this paper are divided into two sections: quasi-steady and vibratory. For the quasi-steady analysis, over 7794 hours of acceleration data were analyzed, while over 27,000 hours were analyzed for the vibratory analysis. The results of the data analysis are presented in this paper in the form of a grand summary for the period under consideration. For the quasi-steady acceleration response, results are presented in the form of a 95% confidence interval for the station during "normal microgravity mode operations" for the following three attitudes: local vertical local horizontal, X-axis perpendicular to the orbit plane and the Russian torque equilibrium attitude. The same analysis was performed for the station during "non-microgravity mode operations" to assess the station quasi-steady acceleration environment over a long period of time. The same type of analysis was performed for the vibratory, but a 95th percentile benchmark was used, which shows the overall acceleration magnitude during Increments 5 and 6. The results, for both quasi-steady and vibratory acceleration response, show that the station is not yet meeting the microgravity requirements during the microgravity mode operations. However, it should be stressed that the requirements apply only at assembly complete, whereas the results presented below apply up to the station's configuration at the end of Increment-6. c2004 Elsevier Ltd. All rights reserved.

Cost-Utility Analysis of Telemonitoring Interventions for Patients with Chronic Obstructive Pulmonary Disease (COPD) in Germany.

PubMed

Hofer, Florian; Achelrod, Dmitrij; Stargardt, Tom

2016-12-01

Chronic obstructive pulmonary disease (COPD) poses major challenges for health care systems. Previous studies suggest that telemonitoring could be effective in preventing hospitalisations and hence reduce costs. The aim was to evaluate whether telemonitoring interventions for COPD are cost-effective from the perspective of German statutory sickness funds. A cost-utility analysis was conducted using a combination of a Markov model and a decision tree. Telemonitoring as add-on to standard treatment was compared with standard treatment alone. The model consisted of four transition stages to account for COPD severity, and a terminal stage for death. Within each cycle, the frequency of exacerbations as well as outcomes for 2015 costs and quality adjusted life years (QALYs) for each stage were calculated. Values for input parameters were taken from the literature. Deterministic and probabilistic sensitivity analyses were conducted. In the base case, telemonitoring led to an increase in incremental costs (€866 per patient) but also in incremental QALYs (0.05 per patient). The incremental cost-effectiveness ratio (ICER) was thus €17,410 per QALY gained. A deterministic sensitivity analysis showed that hospitalisation rate and costs for telemonitoring equipment greatly affected results. The probabilistic ICER averaged €34,432 per QALY (95 % confidence interval 12,161-56,703). We provide evidence that telemonitoring may be cost-effective in Germany from a payer's point of view. This holds even after deterministic and probabilistic sensitivity analyses.

Relating dynamic brain states to dynamic machine states: Human and machine solutions to the speech recognition problem

PubMed Central

Liu, Xunying; Zhang, Chao; Woodland, Phil; Fonteneau, Elisabeth

2017-01-01

There is widespread interest in the relationship between the neurobiological systems supporting human cognition and emerging computational systems capable of emulating these capacities. Human speech comprehension, poorly understood as a neurobiological process, is an important case in point. Automatic Speech Recognition (ASR) systems with near-human levels of performance are now available, which provide a computationally explicit solution for the recognition of words in continuous speech. This research aims to bridge the gap between speech recognition processes in humans and machines, using novel multivariate techniques to compare incremental ‘machine states’, generated as the ASR analysis progresses over time, to the incremental ‘brain states’, measured using combined electro- and magneto-encephalography (EMEG), generated as the same inputs are heard by human listeners. This direct comparison of dynamic human and machine internal states, as they respond to the same incrementally delivered sensory input, revealed a significant correspondence between neural response patterns in human superior temporal cortex and the structural properties of ASR-derived phonetic models. Spatially coherent patches in human temporal cortex responded selectively to individual phonetic features defined on the basis of machine-extracted regularities in the speech to lexicon mapping process. These results demonstrate the feasibility of relating human and ASR solutions to the problem of speech recognition, and suggest the potential for further studies relating complex neural computations in human speech comprehension to the rapidly evolving ASR systems that address the same problem domain. PMID:28945744

Stokes parameters modulator for birefringent filters

NASA Technical Reports Server (NTRS)

Dollfus, A.

1985-01-01

The Solar Birefringent Filter (Filter Polarisiant Solaire Selectif FPSS) of Meudon Observatory is presently located at the focus of a solar refractor with a 28 cm lens directly pointed at the Sun. It produces a diffraction limited image without instrumental polarization and with a spectral resolution of 46,000 in a field of 6 arc min. diameter. The instrument is calibrated for absolute Doppler velocity measurements and is presently used for quantitative imagery of the radial velocity motions in the photosphere. The short period oscillations are recorded. Work of adapting the instrument for the imagery of the solar surface in the Stokes parameters is discussed. The first polarizer of the birefringent filter, with a reference position angle 0 deg, is associated with a fixed quarter wave plate at +45 deg. A rotating quarter wave plate is set at 0 deg and can be turned by incremented steps of exactly +45 deg. Another quarter wave plate also initially set at 0 deg is simultaneously incremented by -45 deg but only on each even step of the first plate. A complete cycle of increments produces images for each of the 6 parameters I + or - Q, I + or - U and I + or - V. These images are then subtracted by pairs to produce a full image in the three Stokes parameters Q, U and V. With proper retardation tolerance and positioning accuracy of the quarter wave plates, the cross talk between the Stokes parameters was calculated and checked to be minimal.

Incremental learning of tasks from user demonstrations, past experiences, and vocal comments.

PubMed

Pardowitz, Michael; Knoop, Steffen; Dillmann, Ruediger; Zöllner, Raoul D

2007-04-01

Since many years the robotics community is envisioning robot assistants sharing the same environment with humans. It became obvious that they have to interact with humans and should adapt to individual user needs. Especially the high variety of tasks robot assistants will be facing requires a highly adaptive and user-friendly programming interface. One possible solution to this programming problem is the learning-by-demonstration paradigm, where the robot is supposed to observe the execution of a task, acquire task knowledge, and reproduce it. In this paper, a system to record, interpret, and reason over demonstrations of household tasks is presented. The focus is on the model-based representation of manipulation tasks, which serves as a basis for incremental reasoning over the acquired task knowledge. The aim of the reasoning is to condense and interconnect the data, resulting in more general task knowledge. A measure for the assessment of information content of task features is introduced. This measure for the relevance of certain features relies both on general background knowledge as well as task-specific knowledge gathered from the user demonstrations. Beside the autonomous information estimation of features, speech comments during the execution, pointing out the relevance of features are considered as well. The results of the incremental growth of the task knowledge when more task demonstrations become available and their fusion with relevance information gained from speech comments is demonstrated within the task of laying a table.

Color and luminance increment thresholds in poor readers.

PubMed

Dain, Stephen J; Floyd, Richard A; Elliot, Robert T

2008-01-01

The hypotheses of a visual basis to reading disabilities in some children have centered around deficits in the visual processes displaying more transient responses to stimuli although hyperactivity in the visual processes displaying sustained responses to stimuli has also been proposed as a mechanism. In addition, there is clear evidence that colored lenses and/or colored overlays and/or colored backgrounds can influence performance in reading and/or may assist in providing comfortable vision for reading and, as a consequence, the ability to maintain reading for longer. As a consequence, it is surprising that the color vision of poor readers is relatively little studied. We assessed luminance increment thresholds and equi-luminous red-green and blue-yellow increment thresholds using a computer based test in central vision and at 10 degrees nasally employing the paradigm pioneered by King-Smith. We examined 35 poor readers (based on the Neale Analysis of Reading) and compared their performance with 35 normal readers matched for age and IQ. Poor readers produced similar luminance contrast thresholds for both foveal and peripheral presentation compared with normals. Similarly, chromatic contrast discrimination for the red/green stimuli was the same in normal and poor readers. However, poor readers had significantly lower thresholds/higher sensitivity for the blue/yellow stimuli, for both foveal and peripheral presentation, compared with normal readers. This hypersensitivity in blue-yellow discrimination may point to why colored lenses and overlays are often found to be effective in assisting many poor readers.

A mesoscale hybrid data assimilation system based on the JMA nonhydrostatic model

NASA Astrophysics Data System (ADS)

Ito, K.; Kunii, M.; Kawabata, T. T.; Saito, K. K.; Duc, L. L.

2015-12-01

This work evaluates the potential of a hybrid ensemble Kalman filter and four-dimensional variational (4D-Var) data assimilation system for predicting severe weather events from a deterministic point of view. This hybrid system is an adjoint-based 4D-Var system using a background error covariance matrix constructed from the mixture of a so-called NMC method and perturbations in a local ensemble transform Kalman filter data assimilation system, both of which are based on the Japan Meteorological Agency nonhydrostatic model. To construct the background error covariance matrix, we investigated two types of schemes. One is a spatial localization scheme and the other is neighboring ensemble approach, which regards the result at a horizontally spatially shifted point in each ensemble member as that obtained from a different realization of ensemble simulation. An assimilation of a pseudo single-observation located to the north of a tropical cyclone (TC) yielded an analysis increment of wind and temperature physically consistent with what is expected for a mature TC in both hybrid systems, whereas an analysis increment in a 4D-Var system using a static background error covariance distorted a structure of the mature TC. Real data assimilation experiments applied to 4 TCs and 3 local heavy rainfall events showed that hybrid systems and EnKF provided better initial conditions than the NMC-based 4D-Var, both for predicting the intensity and track forecast of TCs and for the location and amount of local heavy rainfall events.

Correlation of gas exchange threshold and first muscle oxyhemoglobin inflection point with time-to-exhaustion during heavy-intensity exercise.

PubMed

Coquart, Jérémy B; Mucci, Patrick; L'hermette, Maxime; Chamari, Karim; Tourny, Claire; Garcin, Murielle

2017-03-01

The twofold aim of the study was to: 1) compare the gas exchange threshold (GET), the first oxyhemoglobin inflection point ([O2Hb]-T), and perceptual threshold as determined during an incremental exercise test, and 2) investigate the link between each threshold and time-to-exhaustion during heavy intensity exercise. Fourteen competitive cyclists performed an incremental exercise test to exhaustion on a cycloergometer to determine the different thresholds and peak workload (Wpeak). The participants then performed a sub-maximal constant workload test (90% Wpeak) to exhaustion to determine time-to-exhaustion. The thresholds were identified from: 1) the first breakpoint in the oxygen uptake vs. carbon dioxide output curve (GET), 2) the [O2Hb]-T, and 3) a rating of 13 in perceived exertion (perceptual threshold: RPE13-T). Oxygen uptake at the different thresholds was not significantly different (P>0.05). Moreover, GET and [O2Hb]-T were significantly correlated: 1) to each other (r≥0.79; P≤0.001), and 2) to time-to-exhaustion (r=0.81 and r=0.72, respectively; P<0.01). RPE13-T, however, was not significantly correlated with the time-to-exhaustion (P=0.148). The anaerobic threshold as identified from GET was concomitant to [O2Hb]-T. Both thresholds were correlated to time-to-exhaustion, and could therefore be used as a performance index in middle-duration events.

Effect of Tail Surfaces on the Base Drag of a Body of Revolution at Mach Numbers of 1.5 and 2.0

NASA Technical Reports Server (NTRS)

Spahr, J Richard; Dickey, Robert R

1951-01-01

Wind-tunnel tests were performed at Mach numbers of 1.5 and 2.0 to investigate the influence of tail surfaces on the base drag of a body of revolution without boattailing and having a turbulent boundary layer. The tail surfaces were of rectangular plan form of aspect ratio 2.33 and has symmetrical, circular-arc airfoil section. The results of the investigation showed that the addition of these tail surfaces with the trailing edges at or near the body base incurred a large increase in the base-drag coefficient. For a cruciform tail having a 10-percent-thick airfoil section, this increase was about 70 percent at a Mach number of 1.5 and 35 percent at a Mach number of 2.0. As the trailing edge of the tail was moved forward or rearward of the base by about one tail-chord length, the base-drag increment was reduced to nearly zero. The increments in base-drag coefficient due to the presence of 10-percent-thick tail surfaces were generally twice those for 5-percent-thick surfaces. The base-drag increments due to the presence of a cruciform tail were less than twice those for a plane tail. An estimate of the change in base pressure due to the tail surfaces was made, based on a simple superposition of the airfoil-pressure field onto the base-pressure field behind the body. A comparison of the results with the experimental values indicated that in most cases the trend in the variation of the base-drag increment with changes in tail position could be predicted by this approximate method but that the quantitative agreement at most tail locations was poor.

A Systematic Review of the Economic Evidence for Home Support Interventions in Dementia.

PubMed

Clarkson, Paul; Davies, Linda; Jasper, Rowan; Loynes, Niklas; Challis, David

2017-09-01

Recent evidence signals the need for effective forms of home support to people with dementia and their carers. The cost-effectiveness evidence of different approaches to support is scant. To appraise economic evidence on the cost-effectiveness of home support interventions for dementia to inform future evaluation. A systematic literature review of full and partial economic evaluations was performed using the British National Health Service Economic Evaluation Database supplemented by additional references. Study characteristics and findings, including incremental cost-effectiveness ratios, when available, were summarized narratively. Study quality was appraised using the National Health Service Economic Evaluation Database critical appraisal criteria and independent ratings, agreed by two reviewers. Studies were located on a permutation matrix describing their mix of incremental costs/effects to aid decision making. Of the 151 articles retrieved, 14 studies met the inclusion criteria: 8 concerning support to people with dementia and 6 to carers. Five studies were incremental cost-utility analyses, seven were cost-effectiveness analyses, and two were cost consequences analyses. Five studies expressed incremental cost-effectiveness ratios as cost per quality-adjusted life-year (£6,696-£207,942 per quality-adjusted life-year). In four studies, interventions were dominant over usual care. Two interventions were more costly but more beneficial and were favorable against current acceptability thresholds. Occupational therapy, home-based exercise, and a carers' coping intervention emerged as cost-effective approaches for which there was better evidence. These interventions used environmental modifications, behavior management, physical activity, and emotional support as active components. More robust evidence is needed to judge the value of these and other interventions across the dementia care pathway. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Diurnal and seasonal changes in stem increment and water use by yellow poplar trees in response to environmental stress.

PubMed

McLaughlin, Samuel B; Wullschleger, Stan D; Nosal, Miloslav

2003-11-01

To evaluate indicators of whole-tree physiological responses to climate stress, we determined seasonal, daily and diurnal patterns of growth and water use in 10 yellow poplar (Liriodendron tulipifera L.) trees in a stand recently released from competition. Precise measurements of stem increment and sap flow made with automated electronic dendrometers and thermal dissipation probes, respectively, indicated close temporal linkages between water use and patterns of stem shrinkage and swelling during daily cycles of water depletion and recharge of extensible outer-stem tissues. These cycles also determined net daily basal area increment. Multivariate regression models based on a 123-day data series showed that daily diameter increments were related negatively to vapor pressure deficit (VPD), but positively to precipitation and temperature. The same model form with slight changes in coefficients yielded coefficients of determination of about 0.62 (0.57-0.66) across data subsets that included widely variable growth rates and VPDs. Model R2 was improved to 0.75 by using 3-day running mean daily growth data. Rapid recovery of stem diameter growth following short-term, diurnal reductions in VPD indicated that water stored in extensible stem tissues was part of a fast recharge system that limited hydration changes in the cambial zone during periods of water stress. There were substantial differences in the seasonal dynamics of growth among individual trees, and analyses indicated that faster-growing trees were more positively affected by precipitation, solar irradiance and temperature and more negatively affected by high VPD than slower-growing trees. There were no negative effects of ozone on daily growth rates in a year of low ozone concentrations.

Stature of sub-arctic birch in relation to growth rate, lifespan and tree form.

PubMed

Jónsson, Thorbergur Hjalti

2004-11-01

Sub-arctic mountain birch Betula pubescens var. pumila communities in the North Atlantic region are of variable stature, ranging from prostrate scrubs to forests with trees up to 12 m high. Four hypotheses were tested, relating growth and population characteristics of sub-arctic birch woodland and scrub to tree stature; i.e. the variable stature of birch woods is due to differences in (1) the mean growth rate; (2) the age-related patterns of growth rate; (3) the life expectancy of stems; or (4) the tree form. A stratified random sample of 300 birch trees was drawn from the total population of indigenous birch woodlands and scrub in Iceland, yielding 286 valid sample genets. The population was divided into three sub-populations with dominant trees 0-2, 2-4 and 4-12 m tall, referred to as birch scrub, birch scrub-woodland and birch forest, respectively. Trees in the scrub population were of more contorted growth form than birch in the scrub-woodland and forest populations. Mean growth rates, mean age and median life expectancies increased significantly with sub-population of greater tree stature. At the population level, annual increment and longevity of birch stems was apparently interrelated as the stems in vigorously growing birch sub-populations had a longer life expectancy than those of slower growth. However, no difference was observed between sub-populations in age-related patterns of extension growth rate. The results were consistent with hypotheses (1), (3) and (4), but hypothesis (2) was rejected. Hence, mountain birch of more vigorous growth attains a greater stature than birch of lesser increment due to faster extension growth rate and a longer lifespan. In addition, the more contorted stem form of scrub populations contributes to their low stature.

Tree Waves Upward Migration in the Altai Mountains, Siberia

NASA Astrophysics Data System (ADS)

Kharuk, Viacheslav; Im, Sergei; Dvinskaya, Maria; Petrov, Il'ya

2017-04-01

The phenomenon of "tree waves" (hedges and ribbons) formation within the alpine ecotone in Altai Mountains and its response to observed air temperature increase was considered. At the upper limit of tree growth Siberian pine (Pinus sibirica) forms hedges on windward slopes and ribbons on the leeward ones. Hedges were formed by prevailing winds and oriented along winds direction. Ribbons were formed by snow blowing and accumulating on the leeward slope and perpendicular to the prevailing winds, as well as to the elevation gradient. Hedges were always linked with microtopography features, whereas ribbons were not. Trees are migrating upward by waves and new ribbons and hedges are forming at or near tree line, whereas at lower elevations ribbons and hedges are being transformed into closed forests. Time series of high-resolution satellite scenes (from 1968 to 2010) indicated an upslope shift in the position ribbons averaged 155±26 m (or 3.7 m yr -1) and crown closure increased (about 35-90%). The hedges advance was limited by poor regeneration establishment and was negligible. Regeneration within the "ribbon zone" was approximately 2.5 times (5060 vs 2120 ha -1) higher then within the "hedges zone". During the last four decades, Siberian pine in both hedges and ribbons strongly increased its growth increment and recent tree growth rate for 50 year old trees was about twice higher than recorded for similarly aged trees at the beginning of the 20th century. Growth increment increase was strongly correlated with CO2 concentration in the ambient air (R2 = 0.9), which may indicated CO2- fertilization. Hedges and ribbons are phenomena that are widespread within the southern and northern Siberian Mountains

The Cost Effectiveness of Maintenance Schedules Following Pulmonary Rehabilitation in Patients with Chronic Obstructive Pulmonary Disease: An Economic Evaluation Alongside a Randomised Controlled Trial.

PubMed

Burns, Darren K; Wilson, Edward C F; Browne, Paula; Olive, Sandra; Clark, Allan; Galey, Penny; Dix, Emma; Woodhouse, Helene; Robinson, Sue; Wilson, Andrew

2016-02-01

Chronic obstructive pulmonary disease (COPD) affects approximately 3 million people in the UK. An 8-week pulmonary rehabilitation (PR) course is recommended under current guidelines. However, studies show that initial benefits diminish over time. We present here an economic evaluation conducted alongside a randomised controlled trial (RCT) of a low-intensity maintenance programme over a time horizon of 1 year delivered in UK primary and secondary care settings. Patients with COPD who completed at least 60 % of a standard 8-week PR programme were randomised to a 2-h maintenance session at 3, 6 and 9 months (n = 73) or treatment as usual (n = 75). Outcomes were change in Chronic Respiratory Questionnaire (CRQ) score, EQ-5D-based QALYs, cost (price year 2014) to the UK NHS and social services over the 12 months following initial PR, and incremental cost-effectiveness ratios (ICERs). At 12 months, incremental cost to the NHS and social services was -£204.04 (95 % CI -£1522 to £1114). Incremental CRQ and QALY gains were -0.007 (-0.461 to 0.447) and +0.015 (-0.050 to 0.079), respectively. Based on point estimates, PR maintenance therefore dominates treatment as usual from the perspective of the NHS and social services in terms of cost per QALY gained. Whether it is cost effective in terms of CRQ depends on whether the £204 per patient could be reinvested elsewhere to a CRQ gain of greater than 0.007. However, there is much decision uncertainty: 95 % CIs around increments did not exclude zero, and there is a 72.9 % (72.5 %) probability that the ICER is below £20,000 (£30,000) per QALY. Future research should explore whether more intensive maintenance regimens offer benefit to patients at reasonable cost.

A Conceptual Framework for Assessment of the Benefits of a Global Earth Observation System of Systems

NASA Astrophysics Data System (ADS)

Fritz, S.; Scholes, R. J.; Obersteiner, M.; Bouma, J.

2007-12-01

The aim of the Global Earth Observation System of Systems (GEOSS) is to contribute to human wellbeing though improving the information available to decision-makers at all levels relating to human health and safety, protection of the global environment, the reduction of losses from natural disasters, and achieving sustainable development. Specifically, GEOSS proposes that better international co-operation in the collection, interpretation and sharing of Earth Observation information is an important and cost-effective mechanism for achieving this aim. While there is a widespread intuition that this proposition is correct, at some point the following question needs to be answered: how much additional investment in Earth Observation (and specifically, in its international integration) is enough? This leads directly to some challenging subsidiary questions, such as how can the benefits of Earth Observation be assessed? What are the incremental costs of GEOSS? Are there societal benefit areas where the return on investment is higher than in others? The Geo-Bene project has developed a `benefit chain' concept as a framework for addressing these questions. The basic idea is that an incremental improvement in the observing system (including its data collection, interpretation and information-sharing aspects) will result in an improvement in the quality of decisions based on that information. This will in turn lead to better societal outcomes, which have a value. This incremental value must be judged against the incremental cost of the improved observation system. Since in many cases there will be large uncertainties in the estimation of both the costs and the benefits, and it may not be possible to express one or both of them in monetary terms, we show how order-of-magnitude approaches and a qualitative understanding of the shape of the cost-benefit curves can help guide rational investment decision in Earth Observation systems.

An equation to predict the maximal lactate steady state from ramp-incremental exercise test data in cycling.

PubMed

Iannetta, Danilo; Fontana, Federico Y; Maturana, Felipe Mattioni; Inglis, Erin Calaine; Pogliaghi, Silvia; Keir, Daniel A; Murias, Juan M

2018-05-23

The maximal lactate steady state (MLSS) represents the highest exercise intensity at which an elevated blood lactate concentration ([Lac] b ) is stabilized above resting values. MLSS quantifies the boundary between the heavy-to-very-heavy intensity domains but its determination is not widely performed due to the number of trials required. This study aimed to: (i) develop a mathematical equation capable of predicting MLSS using variables measured during a single ramp-incremental cycling test and (ii) test the accuracy of the optimized mathematical equation. The predictive MLSS equation was determined by stepwise backward regression analysis of twelve independent variables measured in sixty individuals who had previously performed ramp-incremental exercise and in whom MLSS was known (MLSS obs ). Next, twenty-nine different individuals were prospectively recruited to test the accuracy of the equation. These participants performed ramp-incremental exercise to exhaustion and two-to-three 30-min constant-power output cycling bouts with [Lac] b sampled at regular intervals for determination of MLSS obs . Predicted MLSS (MLSS pred ) and MLSS obs in both phases of the study were compared by paired t-test, major-axis regression and Bland-Altman analysis. The predictor variables of MLSS were: respiratory compensation point (Wkg -1 ), peak oxygen uptake (V˙O 2peak ) (mlkg -1 min -1 ) and body mass (kg). MLSS pred was highly correlated with MLSS obs (r=0.93; p<0.01). When this equation was tested on the independent group, MLSS pred was not different from MLSS obs (234±43 vs. 234±44W; SEE 4.8W; r=0.99; p<0.01). These data support the validity of the predictive MLSS equation. We advocate its use as a time-efficient alternative to traditional MLSS testing in cycling. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Simulation of Aluminum Micro-mirrors for Space Applications at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Kuhn, J. L.; Dutta, S. B.; Greenhouse, M. A.; Mott, D. B.

2000-01-01

Closed form and finite element models are developed to predict the device response of aluminum electrostatic torsion micro-mirrors fabricated on silicon substrate for space applications at operating temperatures of 30K. Initially, closed form expressions for electrostatic pressure arid mechanical restoring torque are used to predict the pull-in and release voltages at room temperature. Subsequently, a detailed mechanical finite element model is developed to predict stresses and vertical beam deflection induced by the electrostatic and thermal loads. An incremental and iterative solution method is used in conjunction with the nonlinear finite element model and closed form electrostatic equations to solve. the coupled electro-thermo-mechanical problem. The simulation results are compared with experimental measurements at room temperature of fabricated micro-mirror devices.

The impact of lower urinary tract symptoms on health-related quality of life among patients with multiple sclerosis.

PubMed

Khalaf, Kristin M; Coyne, Karin S; Globe, Denise R; Malone, Daniel C; Armstrong, Edward P; Patel, Vaishali; Burks, Jack

2016-01-01

Lower urinary tract symptoms are commonly experienced among patients with multiple sclerosis (MS), however, their impact on health-related quality of life (HRQOL) has not been well characterized. Herein the incremental impact of lower urinary tract symptoms on HRQOL among patients with MS has been evaluated. A cross-sectional online survey was administered to US residents with a self-reported MS diagnosis. Data pertaining to demographics, disease history, urinary symptoms, and HRQOL, including the Short Form 36, version 2 (SF-36v2), were collected. Patients were stratified into four urinary symptom groups: no/minimal urinary symptoms, urinary urgency (UU), urinary urgency incontinence (UUI), and other lower urinary tract symptoms. Multiple linear regression models evaluated the impact of these symptoms. Out of the 1,052 respondents, mean age was 47.8 ± 10.6 years; mean time since MS diagnosis was 8.5 ± 7.8 years. UUI and UU subgroups showed the greatest adjusted HRQOL decrement compared with the no/minimal urinary symptoms group, scoring 2.8 (SE ± 0.7, UUI) and 3.5 (SE ± 0.8, UU) points lower on SF-36v2 Physical Component Summary, respectively, and 3.7 (SE ± 1.0, UUI) and 5.0 (SE ± 1.2, UU) points lower on SF-36v2 Mental Component Summary (P < 0.001 for all), respectively. Both UU and UUI symptoms contribute to a decrement in HRQOL among patients with MS. The Authors. Neurourology and Urodynamics published by Wiley Periodicals, Inc.

Impact of high-dose atorvastatin therapy and clinical risk factors on incident aortic valve stenosis in patients with cardiovascular disease (from TNT, IDEAL, and SPARCL).

PubMed

Arsenault, Benoit J; Boekholdt, S Matthijs; Mora, Samia; DeMicco, David A; Bao, Weihang; Tardif, Jean-Claude; Amarenco, Pierre; Pedersen, Terje; Barter, Philip; Waters, David D

2014-04-15

Clinical trials have not provided evidence for a role of statin therapy in reducing aortic valve stenosis (AVS) severity in patients with documented AVS. However, whether statin therapy could prevent the onset of AVS is unknown. Our objectives were (1) to compare the incidence rates of AVS among patients treated with high-dose versus usual-dose statin or placebo and (2) to identify clinical risk factors associated with the development of AVS. We conducted post hoc analyses in 23,508 participants from 3 large-scale multicenter atorvastatin randomized blinded clinical trials: Treating to New Targets, the Incremental Decrease in End Points Through Aggressive Lipid Lowering, and the Stroke Prevention by Aggressive Reduction in Cholesterol Levels. The main outcome measure was the incidence of clinical AVS over a median follow-up of 4.9 years (82 cases). Among patients who developed AVS, 39 (47.6%) were treated with atorvastatin 80 mg and 43 (52.4%) were treated with lower dose statin (atorvastatin 10 mg in Treating to New Targets, simvastatin 20 to 40 mg in Incremental Decrease in End Points Through Aggressive Lipid Lowering, or placebo in Stroke Prevention by Aggressive Reduction in Cholesterol Levels; hazard ratio [HR] 0.91, 95% confidence interval [CI] 0.59 to 1.41, p=0.67). In multivariate analyses forcing treatment, sex, and race into the model, factors that were significantly associated with AVS included age (HR 2.17, 95% CI 1.61 to 2.93, p<0.0001 per 1-SD increment), diabetes (HR 1.67, 95% CI 1.00 to 2.80, p=0.05), vitamin K antagonist use (HR 3.25, 95% CI 2.06 to 5.16, p<0.0001), and previous statin use (HR 2.65, 95% CI 1.54 to 4.60, p=0.0008). In conclusion, random allocation to high-dose versus usual-dose statin therapy or placebo did not impact the incidence of AVS among patients without known AVS. Age, diabetes, vitamin K antagonists, and previous statin use were significant predictors of incident AVS in these high-risk patients. Copyright © 2014 Elsevier Inc. All rights reserved.

Thermal stability of Mn-Ir-based specular spin valve structure

NASA Astrophysics Data System (ADS)

Yoon, S. Y.; Lee, D. H.; Jeon, D. M.; Kim, J. H.; Yoon, D. H.; Suh, S. J.

2004-05-01

We studied the thermal properties of specular and conventional spin valves. The specular spin valve showed better thermal properties (e.g. slow MR degradation and sheet resistance increment) than those of conventional spin valve. It is considered that the Mn-Co-Fe-O is formed in the NOL at 543-578 K and this acts as a diffusion barrier for Mn during high-temperature annealing process.

A Knowledge Engineering Approach to Analysis and Evaluation of Construction Schedules

DTIC Science & Technology

1990-02-01

software engineering discipline focusing on constructing KBSs. It is an incremental and cyclical process that requires the interaction of a domain expert(s...the U.S. Army Coips of Engineers ; and (3) the project management software developer, represented by Pinnell Engineering , Inc. Since the primary...the programming skills necessary to convert the raw knowledge intn a form a computer can understand. knowledge engineering : The software engineering

Comparison of four MPPT techniques for PV systems

NASA Astrophysics Data System (ADS)

Atik, L.; Petit, P.; Sawicki, J. P.; Ternifi, Z. T.; Bachir, G.; Aillerie, M.

2016-07-01

The working behavior of a module / PV array is non-linear and highly dependent on working conditions. As a given condition, there is only one point at which the level of available power at its output is maximum. This point varies with time, enlightenment and temperature. To ensure optimum operation, the use of MPPT control allows us to extract the maximum power. This paper presents a comparative study of four widely-adopted MPPT algorithms, such as Perturb and Observe, Incremental Conductance, Measurements of the variation of the open circuit voltage or of the short-circuit current. Their performance is evaluated using, for all these techniques. In particular, this study compares the behaviors of each technique in presence of solar irradiation variations and temperature fluctuations. These MPPT techniques will be compared using the Matlab / Simulink tool.

Usefulness of Pulse Oximeter That Can Measure SpO2 to One Digit After Decimal Point.

PubMed

Yamamoto, Akihiro; Burioka, Naoto; Eto, Aritoshi; Amisaki, Takashi; Shimizu, Eiji

2017-06-01

Pulse oximeters are used to noninvasively measure oxygen saturation in arterial blood (SaO 2 ). Although arterial oxygen saturation measured by pulse oximeter (SpO 2 ) is usually indicated in 1% increments, the value of SaO 2 from arterial blood gas analysis is not an integer. We have developed a new pulse oximeter that can measure SpO 2 to one digit after the decimal point. The values of SpO 2 from the newly developed pulse oximeter are highly correlated with the values of SaO 2 from arterial blood gas analysis (SpO 2 = 0.899 × SaO 2 + 9.944, r = 0.887, P < 0.0001). This device may help improve the evaluation of pathological conditions in patients.

Local Voltage Control in Distribution Networks: A Game-Theoretic Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Xinyang; Tian, Jie; Chen, Lijun

Inverter-based voltage regulation is gaining importance to alleviate emerging reliability and power-quality concerns related to distribution systems with high penetration of photovoltaic (PV) systems. This paper seeks contribution in the domain of reactive power compensation by establishing stability of local Volt/VAr controllers. In lieu of the approximate linear surrogate used in the existing work, the paper establishes existence and uniqueness of an equilibrium point using nonlinear AC power flow model. Key to this end is to consider a nonlinear dynamical system with non-incremental local Volt/VAr control, cast the Volt/VAr dynamics as a game, and leverage the fixed-point theorem as wellmore » as pertinent contraction mapping argument. Numerical examples are provided to complement the analytical results.« less

Local Voltage Control in Distribution Networks: A Game-Theoretic Perspective: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Xinyang; Tian, Jie; Chen, Lijun

Inverter-based voltage regulation is gaining importance to alleviate emerging reliability and power-quality concerns related to distribution systems with high penetration of photovoltaic (PV) systems. This paper seeks contribution in the domain of reactive power compensation by establishing stability of local Volt/VAr controllers. In lieu of the approximate linear surrogate used in the existing work, the paper establishes existence and uniqueness of an equilibrium point using nonlinear AC power flow model. Key to this end is to consider a nonlinear dynamical system with non-incremental local Volt/VAr control, cast the Volt/VAr dynamics as a game, and leverage the fixed-point theorem as wellmore » as pertinent contraction mapping argument. Numerical examples are provided to complement the analytical results.« less

Experimental Procedure for Warm Spinning of Cast Aluminum Components.

PubMed

Roy, Matthew J; Maijer, Daan M

2017-02-01

High performance, cast aluminum automotive wheels are increasingly being incrementally formed via flow forming/metal spinning at elevated temperatures to improve material properties. With a wide array of processing parameters which can affect both the shape attained and resulting material properties, this type of processing is notoriously difficult to commission. A simplified, light-duty version of the process has been designed and implemented for full-size automotive wheels. The apparatus is intended to assist in understanding the deformation mechanisms and the material response to this type of processing. An experimental protocol has been developed to prepare for, and subsequently perform forming trials and is described for as-cast A356 wheel blanks. The thermal profile attained, along with instrumentation details are provided. Similitude with full-scale forming operations which impart significantly more deformation at faster rates is discussed.

Experimental Procedure for Warm Spinning of Cast Aluminum Components

PubMed Central

Roy, Matthew J.; Maijer, Daan M.

2017-01-01

High performance, cast aluminum automotive wheels are increasingly being incrementally formed via flow forming/metal spinning at elevated temperatures to improve material properties. With a wide array of processing parameters which can affect both the shape attained and resulting material properties, this type of processing is notoriously difficult to commission. A simplified, light-duty version of the process has been designed and implemented for full-size automotive wheels. The apparatus is intended to assist in understanding the deformation mechanisms and the material response to this type of processing. An experimental protocol has been developed to prepare for, and subsequently perform forming trials and is described for as-cast A356 wheel blanks. The thermal profile attained, along with instrumentation details are provided. Similitude with full-scale forming operations which impart significantly more deformation at faster rates is discussed. PMID:28190063

Reducing the risk of injury from table saw use: the potential benefits and costs of automatic protection.

PubMed

Graham, John D; Chang, Joice

2015-02-01

The use of table saws in the United States is associated with approximately 28,000 emergency department (ED) visits and 2,000 cases of finger amputation per year. This article provides a quantitative estimate of the economic benefits of automatic protection systems that could be designed into new table saw products. Benefits are defined as reduced health-care costs, enhanced production at work, and diminished pain and suffering. The present value of the benefits of automatic protection over the life of the table saw are interpreted as the switch-point cost value, the maximum investment in automatic protection that can be justified by benefit-cost comparison. Using two alternative methods for monetizing pain and suffering, the study finds switch-point cost values of $753 and $561 per saw. These point estimates are sensitive to the values of inputs, especially the average cost of injury. The various switch-point cost values are substantially higher than rough estimates of the incremental cost of automatic protection systems. Uncertainties and future research needs are discussed. © 2014 Society for Risk Analysis.

The Cultural Evolution of Democracy: Saltational Changes in A Political Regime Landscape

PubMed Central

Lindenfors, Patrik; Jansson, Fredrik; Sandberg, Mikael

2011-01-01

Transitions to democracy are most often considered the outcome of historical modernization processes. Socio-economic changes, such as increases in per capita GNP, education levels, urbanization and communication, have traditionally been found to be correlates or ‘requisites’ of democratic reform. However, transition times and the number of reform steps have not been studied comprehensively. Here we show that historically, transitions to democracy have mainly occurred through rapid leaps rather than slow and incremental transition steps, with a median time from autocracy to democracy of 2.4 years, and overnight in the reverse direction. Our results show that autocracy and democracy have acted as peaks in an evolutionary landscape of possible modes of institutional arrangements. Only scarcely have there been slow incremental transitions. We discuss our results in relation to the application of phylogenetic comparative methods in cultural evolution and point out that the evolving unit in this system is the institutional arrangement, not the individual country which is instead better regarded as the ‘host’ for the political system. PMID:22140565

Model parameter estimation approach based on incremental analysis for lithium-ion batteries without using open circuit voltage

NASA Astrophysics Data System (ADS)

Wu, Hongjie; Yuan, Shifei; Zhang, Xi; Yin, Chengliang; Ma, Xuerui

2015-08-01

To improve the suitability of lithium-ion battery model under varying scenarios, such as fluctuating temperature and SoC variation, dynamic model with parameters updated realtime should be developed. In this paper, an incremental analysis-based auto regressive exogenous (I-ARX) modeling method is proposed to eliminate the modeling error caused by the OCV effect and improve the accuracy of parameter estimation. Then, its numerical stability, modeling error, and parametric sensitivity are analyzed at different sampling rates (0.02, 0.1, 0.5 and 1 s). To identify the model parameters recursively, a bias-correction recursive least squares (CRLS) algorithm is applied. Finally, the pseudo random binary sequence (PRBS) and urban dynamic driving sequences (UDDSs) profiles are performed to verify the realtime performance and robustness of the newly proposed model and algorithm. Different sampling rates (1 Hz and 10 Hz) and multiple temperature points (5, 25, and 45 °C) are covered in our experiments. The experimental and simulation results indicate that the proposed I-ARX model can present high accuracy and suitability for parameter identification without using open circuit voltage.

Numerical Simulation of Wear in a C/C Composite Multidisk Clutch (Preprint)

DTIC Science & Technology

2009-04-01

subroutine FRIC, in the commercial finite element software ( ABAQUS , 6.5-1, Pawtucket, RI) [25], to calculate the local wear depth increment (decrease in...temperature continuity and the heat balance conditions must be satisfied. The subroutine FRIC in ABAQUS code [25] is called only when the contact point is...0.33, thermal expansion coefficients αr = 0.31x10-6/K, αz = 0.29x10-6/K, friction coefficient µ = 0.20, heat convection coefficient h = 100 W/m2K

Reenacting the birth of an intron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hellsten, Uffe; Aspden, Julie L.; Rio, Donald C.

2011-07-01

An intron is an extended genomic feature whose function requires multiple constrained positions - donor and acceptor splice sites, a branch point, a polypyrimidine tract and suitable splicing enhancers - that may be distributed over hundreds or thousands of nucleotides. New introns are therefore unlikely to emerge by incremental accumulation of functional sub-elements. Here we demonstrate that a functional intron can be created de novo in a single step by a segmental genomic duplication. This experiment recapitulates in vivo the birth of an intron that arose in the ancestral jawed vertebrate lineage nearly half a billion years ago.

Microelectromechanical ratcheting apparatus

DOEpatents

Barnes, Stephen M.; Miller, Samuel L.; Jensen, Brian D.; Rodgers, M. Steven; Burg, Michael S.

2001-01-01

A microelectromechanical (MEM) ratcheting apparatus is disclosed which includes an electrostatic or thermal actuator that drives a moveable member in the form of a ring gear, stage, or rack. Motion is effected by one or more reciprocating pawls driven by the actuator in a direction that is parallel to, in line with, or tangential to the path. The reciprocating pawls engage indexing elements (e.g. teeth or pins) on the moveable member to incrementally move the member along a curved or straight path with the ability to precisely control and determine the position of the moveable member. The MEM apparatus can be formed on a silicon substrate by conventional surface micromachining methods.

METHOD FOR DISSOLVING ZIRCONIUM-URANIUM COMPOSITIONS

DOEpatents

Gens, T.A.

1961-07-18

A method is descrioed for treating a zirconium-- uranium composition to form a stable solution from which uranium and other values may be extracted by contacting the composition with at least a 4 molar aqueous solution of ammonium fluoride at a temperature of about 100 deg C, adding a peroxide, in incremental amounts, to the heated solution throughout the period of dissolution until all of the uranium is converted to soluble uranyl salt, adding nitric acid to the resultant solution to form a solvent extraction feed solution to convert the uranyl salt to a solvent extractable state, and thereafter recovering the uranium and other desired values from the feed solution by solvent extraction.

Calculation of Growth Stress in SiO2 Scales Formed by Oxidation of SiC Fibers (PREPRINT)

DTIC Science & Technology

2012-07-01

Poisson effect. Tensile hoop stresses can be >2 GPa for thick scales formed at 򒮨°C. Effects of different fiber radii on growth stresses are examined...original fiber radius and Ω is the ratio of SiC/SiO2 molar volume ratio . The outer radius of the SiO2 scale (c) is (Fig. 1): c = b+w...and νSiO2 are Poison’s ratio for the SiC fiber and the SiO2 scale. Stresses in older increments (j = i-2 to j = 0) are updated with the stress values

Real-time terrain storage generation from multiple sensors towards mobile robot operation interface.

PubMed

Song, Wei; Cho, Seoungjae; Xi, Yulong; Cho, Kyungeun; Um, Kyhyun

2014-01-01

A mobile robot mounted with multiple sensors is used to rapidly collect 3D point clouds and video images so as to allow accurate terrain modeling. In this study, we develop a real-time terrain storage generation and representation system including a nonground point database (PDB), ground mesh database (MDB), and texture database (TDB). A voxel-based flag map is proposed for incrementally registering large-scale point clouds in a terrain model in real time. We quantize the 3D point clouds into 3D grids of the flag map as a comparative table in order to remove the redundant points. We integrate the large-scale 3D point clouds into a nonground PDB and a node-based terrain mesh using the CPU. Subsequently, we program a graphics processing unit (GPU) to generate the TDB by mapping the triangles in the terrain mesh onto the captured video images. Finally, we produce a nonground voxel map and a ground textured mesh as a terrain reconstruction result. Our proposed methods were tested in an outdoor environment. Our results show that the proposed system was able to rapidly generate terrain storage and provide high resolution terrain representation for mobile mapping services and a graphical user interface between remote operators and mobile robots.

Full On-Device Stay Points Detection in Smartphones for Location-Based Mobile Applications.

PubMed

Pérez-Torres, Rafael; Torres-Huitzil, César; Galeana-Zapién, Hiram

2016-10-13

The tracking of frequently visited places, also known as stay points, is a critical feature in location-aware mobile applications as a way to adapt the information and services provided to smartphones users according to their moving patterns. Location based applications usually employ the GPS receiver along with Wi-Fi hot-spots and cellular cell tower mechanisms for estimating user location. Typically, fine-grained GPS location data are collected by the smartphone and transferred to dedicated servers for trajectory analysis and stay points detection. Such Mobile Cloud Computing approach has been successfully employed for extending smartphone's battery lifetime by exchanging computation costs, assuming that on-device stay points detection is prohibitive. In this article, we propose and validate the feasibility of having an alternative event-driven mechanism for stay points detection that is executed fully on-device, and that provides higher energy savings by avoiding communication costs. Our solution is encapsulated in a sensing middleware for Android smartphones, where a stream of GPS location updates is collected in the background, supporting duty cycling schemes, and incrementally analyzed following an event-driven paradigm for stay points detection. To evaluate the performance of the proposed middleware, real world experiments were conducted under different stress levels, validating its power efficiency when compared against a Mobile Cloud Computing oriented solution.

Real-Time Terrain Storage Generation from Multiple Sensors towards Mobile Robot Operation Interface

PubMed Central

Cho, Seoungjae; Xi, Yulong; Cho, Kyungeun

2014-01-01

A mobile robot mounted with multiple sensors is used to rapidly collect 3D point clouds and video images so as to allow accurate terrain modeling. In this study, we develop a real-time terrain storage generation and representation system including a nonground point database (PDB), ground mesh database (MDB), and texture database (TDB). A voxel-based flag map is proposed for incrementally registering large-scale point clouds in a terrain model in real time. We quantize the 3D point clouds into 3D grids of the flag map as a comparative table in order to remove the redundant points. We integrate the large-scale 3D point clouds into a nonground PDB and a node-based terrain mesh using the CPU. Subsequently, we program a graphics processing unit (GPU) to generate the TDB by mapping the triangles in the terrain mesh onto the captured video images. Finally, we produce a nonground voxel map and a ground textured mesh as a terrain reconstruction result. Our proposed methods were tested in an outdoor environment. Our results show that the proposed system was able to rapidly generate terrain storage and provide high resolution terrain representation for mobile mapping services and a graphical user interface between remote operators and mobile robots. PMID:25101321

Terrain shape estimation from optical flow, using Kalman filtering

NASA Astrophysics Data System (ADS)

Hoff, William A.; Sklair, Cheryl W.

1990-01-01

As one moves through a static environment, the visual world as projected on the retina seems to flow past. This apparent motion, called optical flow, can be an important source of depth perception for autonomous robots. An important application is in planetary exploration -the landing vehicle must find a safe landing site in rugged terrain, and an autonomous rover must be able to navigate safely through this terrain. In this paper, we describe a solution to this problem. Image edge points are tracked between frames of a motion sequence, and the range to the points is calculated from the displacement of the edge points and the known motion of the camera. Kalman filtering is used to incrementally improve the range estimates to those points, and provide an estimate of the uncertainty in each range. Errors in camera motion and image point measurement can also be modelled with Kalman filtering. A surface is then interpolated to these points, providing a complete map from which hazards such as steeply sloping areas can be detected. Using the method of extended Kalman filtering, our approach allows arbitrary camera motion. Preliminary results of an implementation are presented, and show that the resulting range accuracy is on the order of 1-2% of the range.

39 CFR 3050.23 - Documentation supporting incremental cost estimates in the Postal Service's section 3652 report.

Code of Federal Regulations, 2010 CFR

2010-07-01

... incremental cost model shall be reported. ... 39 Postal Service 1 2010-07-01 2010-07-01 false Documentation supporting incremental cost... REGULATORY COMMISSION PERSONNEL PERIODIC REPORTING § 3050.23 Documentation supporting incremental cost...

Composite Calderas: The Long and Short of it

NASA Astrophysics Data System (ADS)

Gravley, D. M.; Hasegawa, T.; Nakagawa, M.; Wilson, C. J.

2006-12-01

Calderas formed in supereruptions are normally linked to a single magma body. However, caldera formation, regional tectonics, and multiple magma bodies may interact to form composite structures with complex geometries. The term composite caldera is often used without reference as to whether the `composite' is in time or space. Three examples of composite caldera styles from New Zealand and Japan show field, geophysical, geochemical and isotopic evidence to suggest that current models for the size, shape and evolution of calderas may be too simplistic. In our examples, multiple separate magma bodies distributed in either space or time, or both, may play a significant role in composite caldera formation. Multiple, clustered collapse events incremental in time: Akan caldera in Hokkaido appears to be a single, rectangular shaped caldera. However, the identification of 17 eruptive units spanning >1 Myr suggests that the caldera evolved incrementally over time and space. New gravity data shows that the caldera is actually a daisy-chain of 3 distinct collapse structures that can be correlated, using lithic componentry, to 3 major geochemical groups in the eruptive products. Multiple, clustered collapse events in a single eruption sequence: Shikotsu caldera in Hokkaido was originally thought to have formed following the eruption of a single large zoned magma chamber. However, the caldera-related deposits are characterized by several geochemically distinct pumice types that can not have been accommodated in a single magma system. Our studies suggest that the variations in pumice compositions are consistent with multiple distinct magma bodies feeding coeval eruptions from several vent sources within an area that collapsed to form a single caldera. Paired calderas with linking eruption-related regional faulting: Rotorua and Ohakuri calderas in New Zealand are 30 km apart and formed in close succession during a complex but virtually continuous eruption sequence at ca. 240 ka. The distinct calderas are joined in dumb-bell fashion by an intervening zone of eruption-related and immediately post-eruptive faulting and collapse.

Invariant-feature-based adaptive automatic target recognition in obscured 3D point clouds

NASA Astrophysics Data System (ADS)

Khuon, Timothy; Kershner, Charles; Mattei, Enrico; Alverio, Arnel; Rand, Robert

2014-06-01

Target recognition and classification in a 3D point cloud is a non-trivial process due to the nature of the data collected from a sensor system. The signal can be corrupted by noise from the environment, electronic system, A/D converter, etc. Therefore, an adaptive system with a desired tolerance is required to perform classification and recognition optimally. The feature-based pattern recognition algorithm architecture as described below is particularly devised for solving a single-sensor classification non-parametrically. Feature set is extracted from an input point cloud, normalized, and classifier a neural network classifier. For instance, automatic target recognition in an urban area would require different feature sets from one in a dense foliage area. The figure above (see manuscript) illustrates the architecture of the feature based adaptive signature extraction of 3D point cloud including LIDAR, RADAR, and electro-optical data. This network takes a 3D cluster and classifies it into a specific class. The algorithm is a supervised and adaptive classifier with two modes: the training mode and the performing mode. For the training mode, a number of novel patterns are selected from actual or artificial data. A particular 3D cluster is input to the network as shown above for the decision class output. The network consists of three sequential functional modules. The first module is for feature extraction that extracts the input cluster into a set of singular value features or feature vector. Then the feature vector is input into the feature normalization module to normalize and balance it before being fed to the neural net classifier for the classification. The neural net can be trained by actual or artificial novel data until each trained output reaches the declared output within the defined tolerance. In case new novel data is added after the neural net has been learned, the training is then resumed until the neural net has incrementally learned with the new novel data. The associative memory capability of the neural net enables the incremental learning. The back propagation algorithm or support vector machine can be utilized for the classification and recognition.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantz, Eric; Mai, Trieu; Wiser, Ryan H.

This paper evaluates potential changes in the power system associated with sustained growth in wind generation in the United States to 35% of end-use demand by 2050; Wiser et al. (2016) evaluate societal benefits and other impacts for this same scenario. Under reference or central conditions, the analysis finds cumulative wind capacity of 404 gigawatts (GW) would be required to reach this level and drive 2050 incremental electricity rate and cumulative electric sector savings of 2% and 3% respectively, relative to a scenario with no new wind capacity additions. Greater savings are estimated under higher fossil fuel costs or withmore » greater advancements in wind technologies. Conversely, incremental costs are found when fossil fuel costs are lower than central assumptions or wind technology improvements are more-limited. Through 2030, the primary generation sources displaced by new wind capacity include natural gas and coal-fired generation. By 2050, wind could displace other renewables. Incremental new transmission infrastructure totaling 29 million megawatt-miles is estimated to be needed by 2050. In conjunction with related societal benefits, this work demonstrates that 35% wind energy by 2050 is plausible, could support enduring benefits, and could result in long-term consumer savings, if nearer-term (pre-2030) cost barriers are overcome; at the same time, these opportunities are not anticipated to be realized in their full form under 'business-as-usual' conditions.« less

A Patchy Growth via Successive and Simultaneous Cambia: Key to Success of the Most Widespread Mangrove Species Avicennia marina?

PubMed Central

Schmitz, Nele; Robert, Elisabeth M. R.; Verheyden, Anouk; Kairo, James Gitundu; Beeckman, Hans; Koedam, Nico

2008-01-01

Background and Aims Secondary growth via successive cambia has been intriguing researchers for decades. Insight into the mechanism of growth layer formation is, however, limited to the cellular level. The present study aims to clarify secondary growth via successive cambia in the mangrove species Avicennia marina on a macroscopic level, addressing the formation of the growth layer network as a whole. In addition, previously suggested effects of salinity on growth layer formation were reconsidered. Methods A 1-year cambial marking experiment was performed on 80 trees from eight sites in two mangrove forests in Kenya. Environmental (soil water salinity and nutrients, soil texture, inundation frequency) and tree characteristics (diameter, height, leaf area index) were recorded for each site. Both groups of variables were analysed in relation to annual number of growth layers, annual radial increment and average growth layer width of stem discs. Key Results Between trees of the same site, the number of growth layers formed during the 1-year study period varied from only part of a growth layer up to four growth layers, and was highly correlated to the corresponding radial increment (0–5 mm year–1), even along the different sides of asymmetric stem discs. The radial increment was unrelated to salinity, but the growth layer width decreased with increasing salinity and decreasing tree height. Conclusions A patchy growth mechanism was proposed, with an optimal growth at distinct moments in time at different positions around the stem circumference. This strategy creates the opportunity to form several growth layers simultaneously, as observed in 14 % of the studied trees, which may optimize tree growth under favourable conditions. Strong evidence was provided for a mainly endogenous trigger controlling cambium differentiation, with an additional influence of current environmental conditions in a trade-off between hydraulic efficiency and mechanical stability. PMID:18006508

Metabolite profiling and transcript analysis reveal specificities in the response of a berry derived cell culture to abiotic stresses

PubMed Central

Ayenew, Biruk; Degu, Asfaw; Manela, Neta; Perl, Avichai; Shamir, Michal O.; Fait, Aaron

2015-01-01

As climate changes, there is a need to understand the expected effects on viticulture. In nature, stresses exist in a combined manner, hampering the elucidation of the effect of individual cues on grape berry metabolism. Cell suspension culture originated from pea-size Gamy Red grape berry was used to harness metabolic response to high light (HL; 2500 μmol m-2s-1), high temperature (HT; 40°C) and their combination in comparison to 25°C and 100 μmol m-2s-1 under controlled condition. When LC–MS and GC–MS based metabolite profiling was implemented and integrated with targeted RT-qPCR transcript analysis specific responses were observed to the different cues. HL enhanced polyphenol metabolism while HT and its combination with HL induced amino acid and organic acid metabolism with additional effect on polyphenols. The trend of increment in TCA cycle genes like ATCs, ACo1, and IDH in the combined treatment might support the observed increment in organic acids, GABA shunt, and their derivatives. The apparent phenylalanine reduction with polyphenol increment under HL suggests enhanced fueling of the precursor toward the downstream phenylpropanoid pathway. In the polyphenol metabolism, a differential pattern of expression of flavonoid 3′,5′ hydroxylase and flavonoid 3′ hydroxylase was observed under high light (HL) and combined cues which were accompanied by characteristic metabolite profiles. HT decreased glycosylated cyanidin and peonidin forms while the combined cues increased acetylated and coumarylated peonidin forms. Transcription factors regulating anthocyanin metabolism and their methylation, MYB, OMT, UFGT, and DFR, were expressed differentially among the treatments, overall in agreement with the metabolite profiles. Taken together these data provide insights into the coordination of central and secondary metabolism in relation to multiple abiotic stresses. PMID:26442042

A test of fixed and moving reference point control in posture.

PubMed

Lee, I-Chieh; Pacheco, Matheus M; Newell, Karl M

2017-01-01

This study investigated two contrasting assumptions of the regulation of posture: namely, fixed and moving reference point control. These assumptions were tested in terms of time-dependent structure and data distribution properties when stability is manipulated. Fifteen male participants performed a tightrope simulated balance task that is, maintaining a tandem stance while holding a pole. Pole length (and mass) and the standing support surface (fixed surface/balance board) were manipulated so as to mechanically change the balance stability. The mean and standard deviation (SD) of COP length were reduced with pole length increment but only in the balance board surface condition. Also, the SampEn was lower with greater pole length for the balance board but not the fixed surface. More than one peak was present in the distribution of COP in the majority of trials. Collectively, the findings provide evidence for a moving reference point in the maintenance of postural stability for quiet standing. Copyright © 2016 Elsevier B.V. All rights reserved.

A novel methodology for in-process monitoring of flow forming

NASA Astrophysics Data System (ADS)

Appleby, Andrew; Conway, Alastair; Ion, William

2017-10-01

Flow forming (FF) is an incremental cold working process with near-net-shape forming capability. Failures by fracture due to high deformation can be unexpected and sometimes catastrophic, causing tool damage. If process failures can be identified in real time, an automatic cut-out could prevent costly tool damage. Sound and vibration monitoring is well established and commercially viable in the machining sector to detect current and incipient process failures, but not for FF. A broad-frequency microphone was used to record the sound signature of the manufacturing cycle for a series of FF parts. Parts were flow formed using single and multiple passes, and flaws were introduced into some of the parts to simulate the presence of spontaneously initiated cracks. The results show that this methodology is capable of identifying both introduced defects and spontaneous failures during flow forming. Further investigation is needed to categorise and identify different modes of failure and identify further potential applications in rotary forming.

14 CFR 1260.53 - Incremental funding.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Incremental funding. 1260.53 Section 1260.53 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General Special Conditions § 1260.53 Incremental funding. Incremental Funding October 2000 (a...

14 CFR 1260.53 - Incremental funding.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Incremental funding. 1260.53 Section 1260.53 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General Special Conditions § 1260.53 Incremental funding. Incremental Funding October 2000 (a...

14 CFR 1260.53 - Incremental funding.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Incremental funding. 1260.53 Section 1260.53 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General Special Conditions § 1260.53 Incremental funding. Incremental Funding October 2000 (a...

Decentralized Control of Scheduling in Distributed Systems.

DTIC Science & Technology

1983-12-15

does not perform quite as well as the 10 state system, but is less sensitive to changes in scheduling period. It performs best when scheduling is...intra-process concerns. We extend theLr concept of a process to inolude Inter -ress comunication. That is. various form of send and receive primitives...Current busyness of each site based on some responses to requests for bids. A received bid is utilization factor. adjusted by incrementing it by a

14 CFR 1260.53 - Incremental funding.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Incremental funding. 1260.53 Section 1260.53 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General Special Conditions § 1260.53 Incremental funding. Incremental Funding October 2000 (a) Only $___ of the...

48 CFR 3452.232-71 - Incremental funding.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Incremental funding. 3452... 3452.232-71 Incremental funding. As prescribed in 3452.771, insert the following provision in solicitations: Incremental Funding (AUG 1987) (a) Sufficient funds are not presently available to cover the...

Potential stocks and increments of woody biomass in the European Union under different management and climate scenarios.

PubMed

Kindermann, Georg E; Schörghuber, Stefan; Linkosalo, Tapio; Sanchez, Anabel; Rammer, Werner; Seidl, Rupert; Lexer, Manfred J

2013-02-01

Forests play an important role in the global carbon flow. They can store carbon and can also provide wood which can substitute other materials. In EU27 the standing biomass is steadily increasing. Increments and harvests seem to have reached a plateau between 2005 and 2010. One reason for reaching this plateau will be the circumstance that the forests are getting older. High ages have the advantage that they typical show high carbon concentration and the disadvantage that the increment rates are decreasing. It should be investigated how biomass stock, harvests and increments will develop under different climate scenarios and two management scenarios where one is forcing to store high biomass amounts in forests and the other tries to have high increment rates and much harvested wood. A management which is maximising standing biomass will raise the stem wood carbon stocks from 30 tC/ha to 50 tC/ha until 2100. A management which is maximising increments will lower the stock to 20 tC/ha until 2100. The estimates for the climate scenarios A1b, B1 and E1 are different but there is much more effect by the management target than by the climate scenario. By maximising increments the harvests are 0.4 tC/ha/year higher than in the management which maximises the standing biomass. The increments until 2040 are close together but around 2100 the increments when maximising standing biomass are approximately 50 % lower than those when maximising increments. Cold regions will benefit from the climate changes in the climate scenarios by showing higher increments. The results of this study suggest that forest management should maximise increments, not stocks to be more efficient in sense of climate change mitigation. This is true especially for regions which have already high carbon stocks in forests, what is the case in many regions in Europe. During the time span 2010-2100 the forests of EU27 will absorb additional 1750 million tC if they are managed to maximise increments compared if they are managed to maximise standing biomass. Incentives which will increase the standing biomass beyond the increment optimal biomass should therefore be avoided. Mechanisms which will maximise increments and sustainable harvests need to be developed to have substantial amounts of wood which can be used as substitution of non sustainable materials.

18 CFR 154.309 - Incremental expansions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Incremental expansions. 154.309 Section 154.309 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Changes § 154.309 Incremental expansions. (a) For every expansion for which incremental rates are charged...

18 CFR 154.309 - Incremental expansions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Incremental expansions. 154.309 Section 154.309 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Changes § 154.309 Incremental expansions. (a) For every expansion for which incremental rates are charged...

18 CFR 154.309 - Incremental expansions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Incremental expansions. 154.309 Section 154.309 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Changes § 154.309 Incremental expansions. (a) For every expansion for which incremental rates are charged...

18 CFR 154.309 - Incremental expansions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Incremental expansions. 154.309 Section 154.309 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Changes § 154.309 Incremental expansions. (a) For every expansion for which incremental rates are charged...

18 CFR 154.309 - Incremental expansions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Incremental expansions. 154.309 Section 154.309 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... Changes § 154.309 Incremental expansions. (a) For every expansion for which incremental rates are charged...

An efficient global energy optimization approach for robust 3D plane segmentation of point clouds

NASA Astrophysics Data System (ADS)

Dong, Zhen; Yang, Bisheng; Hu, Pingbo; Scherer, Sebastian

2018-03-01

Automatic 3D plane segmentation is necessary for many applications including point cloud registration, building information model (BIM) reconstruction, simultaneous localization and mapping (SLAM), and point cloud compression. However, most of the existing 3D plane segmentation methods still suffer from low precision and recall, and inaccurate and incomplete boundaries, especially for low-quality point clouds collected by RGB-D sensors. To overcome these challenges, this paper formulates the plane segmentation problem as a global energy optimization because it is robust to high levels of noise and clutter. First, the proposed method divides the raw point cloud into multiscale supervoxels, and considers planar supervoxels and individual points corresponding to nonplanar supervoxels as basic units. Then, an efficient hybrid region growing algorithm is utilized to generate initial plane set by incrementally merging adjacent basic units with similar features. Next, the initial plane set is further enriched and refined in a mutually reinforcing manner under the framework of global energy optimization. Finally, the performances of the proposed method are evaluated with respect to six metrics (i.e., plane precision, plane recall, under-segmentation rate, over-segmentation rate, boundary precision, and boundary recall) on two benchmark datasets. Comprehensive experiments demonstrate that the proposed method obtained good performances both in high-quality TLS point clouds (i.e., http://SEMANTIC3D.NET)

Cost-Effectiveness Analysis of a Television Campaign to Promote Seasonal Influenza Vaccination Among the Elderly.

PubMed

Kim, Minchul; Yoo, Byung-Kwang

2015-07-01

The U.S. policy goals regarding influenza vaccination coverage rate among the elderly include the increase in the coverage rate and the elimination of disparities across racial/ethnic groups. To examine the potential effectiveness of a television (TV) campaign to increase seasonal influenza vaccination among the elderly. We estimated the incremental cost-effectiveness ratio (ICER, defined as incremental cost per additionally vaccinated Medicare individual) of a hypothetical nationwide TV campaign for influenza vaccination compared with no campaign. We measured the effectiveness of the nationwide TV campaign (advertised once a week at prime time for 30 seconds) during a 17-week influenza vaccination season among four racial/ethnic elderly groups (N=39 million): non-Hispanic white (W), non-Hispanic African American (AA), English-speaking Hispanic (EH), and Spanish-speaking Hispanic (SH). The hypothetical campaign cost was $5,960,000 (in 2012 US dollars). The estimated campaign effectiveness ranged from -1.1% (the SH group) to 1.42% (the W group), leading to an increased disparity in influenza vaccination among non-Hispanic white and non-Hispanic African American (W-AA) groups (0.6 percentage points), W-EH groups (0.1 percentage points), and W-SH groups (1.5 percentage points). The estimated ICER was $23.54 (95% confidence interval $14.21-$39.37) per additionally vaccinated Medicare elderly in a probabilistic analysis. Race/ethnicity-specific ICERs were lowest among the EH group ($22.27), followed by the W group ($22.47) and the AA group ($30.55). The nationwide TV campaign was concluded to be reasonably cost-effective compared with a benchmark intervention (with ICER $44.39 per vaccinated individual) of a school-located vaccination program. Break-even analyses estimated the maximum acceptable campaign cost to be $14,870,000, which was comparable to the benchmark ICER. The results could justify public expenditures on the implementation of a future nationwide TV campaign, which should include multilingual campaigns, for promoting seasonal influenza vaccination. Copyright © 2015. Published by Elsevier Inc.

Metabolic syndrome cluster does not provide incremental prognostic information in patients with stable cardiovascular disease: A post hoc analysis of the AIM-HIGH trial.

PubMed

Lyubarova, Radmila; Robinson, Jennifer G; Miller, Michael; Simmons, Debra L; Xu, Ping; Abramson, Beth L; Elam, Marshall B; Brown, Todd M; McBride, Ruth; Fleg, Jerome L; Desvigne-Nickens, Patrice; Ayenew, Woubeshet; Boden, William E

Metabolic syndrome (MS) is a well-known risk factor for the development of cardiovascular (CV) disease; yet, controversy persists whether it adds incremental prognostic value in patients with established CV disease. This study was performed to determine if MS is associated with worse CV outcomes in patients with established CV disease treated intensively with statins. We performed a post hoc analysis of the Atherothrombosis Intervention in Metabolic Syndrome with Low HDL/High Triglycerides and Impact on Global Health Outcomes trial, in which patients with established CV disease and atherogenic dyslipidemia (n = 3414) were randomly assigned to receive extended release niacin or placebo during a mean 36-month follow-up, to assess whether the presence of MS or the number of MS components contributed to CV outcomes. The composite primary end point of CV events occurred in 15.1% of patients without MS vs 13.8%, 16.9%, and 16.8% of patients with MS in the subsets with 3, 4, and 5 MS components, respectively (corresponding adjusted hazard ratios 0.9, 1.1, and 1.1 relative to patients without MS), P = .55. Comparing subgroups with 3 vs 4 or 5 MS components, there was no significant difference in either the composite primary end point or secondary end points. Patients with diabetes mellitus had higher event rates, with or without the presence of MS. The presence of MS was not associated with worse CV outcomes in the AIM-HIGH population. The rate of CV events in statin-treated Atherothrombosis Intervention in Metabolic Syndrome with Low HDL/High Triglycerides and Impact on Global Health Outcomes patients with MS was not significantly influenced by the number of MS components. Copyright © 2017 National Lipid Association. All rights reserved.

American Ginseng Modifies 137Cs-Induced DNA Damage and Oxidative Stress in Human Lymphocytes

PubMed Central

Lee, Tung-Kwang; O’Brien, Kevin F.; Wang, Weidong; Sheng, Chao; Wang, Tao; Johnke, Roberta M.; Allison, Ron R.

2009-01-01

The multifold bioactive medicinal properties of ginseng have been closely linked to its antioxidative ability, which is related to its ginsenoside content. Since the key mechanism of radiation-induced cell death and tissue damage is the generation of reactive oxygen species (ROS) that attack cellular DNA, this study focuses on the impact of a standardized North American ginseng extract (NAGE) on 137Cs-induced oxidative stress in human peripheral lymphocytes (PBL) obtained from 10 healthy individuals (6M/4F), 42.7 ± 4.6 years of age. At two different time points (0 h and 24 h before irradiation), we applied NAGE (250 – 1000 µg ml−1) to mononuclear cell cultures for cytokinesis-block micronuclei (MN) assay and determination of the state of oxidative stress in PBL. We found that at both time points, NAGE significantly reduced the MN yields in PBL after irradiation (1 and 2 Gy) in a concentration-dependent manner (P<0.001). Compared with radiation alone, the maximum reduction rate of MN yield were 51.1% and 49.1% after 1 Gy and 2 Gy exposures, respectively. We also found that before irradiation the presence of NAGE in the culture medium resulted in a significant increased intracellular total antioxidant capacity (TAC) in PBL. At both time points, the increment of 137Cs-induced MN yields in PBL was positively correlated with the increment of intracellular ROS production (R = 0.6 – 0.7, P = 0.002), but negatively correlated with the reduction of TAC levels (R = −0.4 −0.5, P = 0.02 – 0.004). However, the presence of NAGE in the culture medium significantly increased the TAC levels, while concomitantly decreasing both ROS production and MN yields in PBL (P<0.001). Our findings that NAGE is effective in protecting human PBL against radiation-induced oxidative stress should encourage further in vivo study of dietary supplementation with NAGE as an effective natural radiation countermeasure. PMID:19946576

Infrared cameras are potential traceable "fixed points" for future thermometry studies.

PubMed

Yap Kannan, R; Keresztes, K; Hussain, S; Coats, T J; Bown, M J

2015-01-01

The National physical laboratory (NPL) requires "fixed points" whose temperatures have been established by the International Temperature Scale of 1990 (ITS 90) be used for device calibration. In practice, "near" blackbody radiators together with the standard platinum resistance thermometer is accepted as a standard. The aim of this study was to report the correlation and limits of agreement (LOA) of the thermal infrared camera and non-contact infrared temporal thermometer against each other and the "near" blackbody radiator. Temperature readings from an infrared thermography camera (FLIR T650sc) and a non-contact infrared temporal thermometer (Hubdic FS-700) were compared to a near blackbody (Hyperion R blackbody model 982) at 0.5 °C increments between 20-40 °C. At each increment, blackbody cavity temperature was confirmed with the platinum resistance thermometer. Measurements were taken initially with the thermal infrared camera followed by the infrared thermometer, with each device mounted in turn on a stand at a fixed distance of 20 cm and 5 cm from the blackbody aperture, respectively. The platinum thermometer under-estimated the blackbody temperature by 0.015 °C (95% LOA: -0.08 °C to 0.05 °C), in contrast to the thermal infrared camera and infrared thermometer which over-estimated the blackbody temperature by 0.16 °C (95% LOA: 0.03 °C to 0.28 °C) and 0.75 °C (95% LOA: -0.30 °C to 1.79 °C), respectively. Infrared thermometer over-estimates thermal infrared camera measurements by 0.6 °C (95% LOA: -0.46 °C to 1.65 °C). In conclusion, the thermal infrared camera is a potential temperature reference "fixed point" that could substitute mercury thermometers. However, further repeatability and reproducibility studies will be required with different models of thermal infrared cameras.

Incremental passivity and output regulation for switched nonlinear systems

NASA Astrophysics Data System (ADS)

Pang, Hongbo; Zhao, Jun

2017-10-01

This paper studies incremental passivity and global output regulation for switched nonlinear systems, whose subsystems are not required to be incrementally passive. A concept of incremental passivity for switched systems is put forward. First, a switched system is rendered incrementally passive by the design of a state-dependent switching law. Second, the feedback incremental passification is achieved by the design of a state-dependent switching law and a set of state feedback controllers. Finally, we show that once the incremental passivity for switched nonlinear systems is assured, the output regulation problem is solved by the design of global nonlinear regulator controllers comprising two components: the steady-state control and the linear output feedback stabilising controllers, even though the problem for none of subsystems is solvable. Two examples are presented to illustrate the effectiveness of the proposed approach.

Method and system for laser-based formation of micro-shapes in surfaces of optical elements

DOEpatents

Bass, Isaac Louis; Guss, Gabriel Mark

2013-03-05

A method of forming a surface feature extending into a sample includes providing a laser operable to emit an output beam and modulating the output beam to form a pulse train having a plurality of pulses. The method also includes a) directing the pulse train along an optical path intersecting an exposed portion of the sample at a position i and b) focusing a first portion of the plurality of pulses to impinge on the sample at the position i. Each of the plurality of pulses is characterized by a spot size at the sample. The method further includes c) ablating at least a portion of the sample at the position i to form a portion of the surface feature and d) incrementing counter i. The method includes e) repeating steps a) through d) to form the surface feature. The sample is free of a rim surrounding the surface feature.

Is isoproterenol really required during electrophysiological study in patients with Wolff-Parkinson-White syndrome?

PubMed

Pauriah, Maheshwar; Cismaru, Gabriel; Sellal, Jean-Marc; De Chillou, Christian; Brembilla-Perrot, Béatrice

2013-01-01

We have studied the results of electrophysiological study (EPS) in patients with Wolff-Parkinson-White syndrome (WPW) and spontaneous adverse clinical presentation and determined whether isoproterenol added incremental value. EPS was performed in 63 patients with WPW and adverse clinical presentation at baseline. EPS was repeated after infusion of isoproterenol in 37 patients, including 25 without criteria for a malignant form at baseline. Atrioventricular orthodromic tachycardia was induced 44%, antidromic tachycardia in 11%, atrial fibrillation (AF) in 68% at baseline. At baseline EPS, criteria for a malignant form (AF induction and shortest CL <250 ms) were noted in 60%; tachycardia was not inducible in 16%. All the patients met the criteria for a malignant form after isoproterenol. EPS at baseline missed 16% of patients at risk of life-threatening arrhythmias who had no inducible tachyarrhythmia and 40% without classical criteria for malignant form. Copyright © 2013 Elsevier Inc. All rights reserved.

14 CFR 1274.918 - Incremental funding.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Incremental funding. 1274.918 Section 1274... COMMERCIAL FIRMS Other Provisions and Special Conditions § 1274.918 Incremental funding. Incremental Funding... Agreement, as required, until it is fully funded. Any work beyond the funding limit will be at the recipient...

14 CFR 1274.918 - Incremental funding.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Incremental funding. 1274.918 Section 1274... COMMERCIAL FIRMS Other Provisions and Special Conditions § 1274.918 Incremental funding. Incremental Funding... Agreement, as required, until it is fully funded. Any work beyond the funding limit will be at the recipient...

14 CFR 1274.918 - Incremental funding.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Incremental funding. 1274.918 Section 1274... COMMERCIAL FIRMS Other Provisions and Special Conditions § 1274.918 Incremental funding. Incremental Funding... Agreement, as required, until it is fully funded. Any work beyond the funding limit will be at the recipient...

14 CFR 1274.918 - Incremental funding.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Incremental funding. 1274.918 Section 1274... COMMERCIAL FIRMS Other Provisions and Special Conditions § 1274.918 Incremental funding. Incremental Funding... Agreement, as required, until it is fully funded. Any work beyond the funding limit will be at the recipient...

14 CFR § 1260.53 - Incremental funding.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Incremental funding. § 1260.53 Section § 1260.53 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION GRANTS AND COOPERATIVE AGREEMENTS General Special Conditions § 1260.53 Incremental funding. Incremental Funding October 2000 (a...

Building perceptual color maps for visualizing interval data

NASA Astrophysics Data System (ADS)

Kalvin, Alan D.; Rogowitz, Bernice E.; Pelah, Adar; Cohen, Aron

2000-06-01

In visualization, a 'color map' maps a range of data values onto a scale of colors. However, unless a color map is e carefully constructed, visual artifacts can be produced. This problem has stimulated considerable interest in creating perceptually based color maps, that is, color maps where equal steps in data value are perceived as equal steps in the color map [Robertson (1988); Pizer (1981); Green (1992); Lefkowitz and Herman, 1992)]. In Rogowitz and Treinish, (1996, 1998) and in Bergman, Treinish and Rogowitz, (1995), we demonstrated that color maps based on luminance or saturation could be good candidates for satisfying this requirement. This work is based on the seminal work of S.S. Stevens (1966), who measured the perceived magnitude of different magnitudes of physical stimuli. He found that for many physical scales, including luminance (cd/m2) and saturation (the 'redness' of a long-wavelength light source), equal ratios in stimulus value produced equal ratios in perceptual magnitude. He interpreted this as indicating that there exists in human cognition a common scale for representing magnitude, and we scale the effects of different physical stimuli to this internal scale. In Rogowitz, Kalvin, Pelahb and Cohen (1999), we used a psychophysical technique to test this hypothesis as it applies to the creation of perceptually uniform color maps. We constructed color maps as trajectories through three-color spaces, a common computer graphics standard (uncalibrated HSV), a common perceptually-based engineering standard for creating visual stimuli (L*a*b*), and a space commonly used in the graphic arts (Munsell). For each space, we created color scales that varied linearly in hue, saturation, or luminance and measured the detectability of increments in hue, saturation or luminance for each of these color scales. We measured the amplitude of the just-detectable Gaussian increments at 20 different values along the range of each color map. For all three color spaces, we found that luminance-based color maps provided the most perceptually- uniform representations of the data. The just-detectable increment was constant at all points in the color map, with the exception of the lowest-luminance values, where a larger increment was required. The saturation-based color maps provided less sensitivity than the luminance-based color maps, requiring much larger increments for detection. For the hue- based color maps, the size of the increment required for detection varied across the range. For example, for the standard 'rainbow' color map (uncalibrated HSV, hue-varying map), a step in the 'green' region required an increment 16 times the size of the increment required in the 'cyan' part of the range. That is, the rainbow color map would not successfully represent changes in the data in the 'green' region of this color map. In this paper, we extend this research by studying the detectability of spatially-modulated Gabor targets based on these hue, saturation and luminance scales. Since, in visualization, the user is called upon to detect and identify patterns that vary in their spatial characteristics, it is important to study how different types of color maps represent data with varying spatial properties. To do so, we measured modulation thresholds for low-(0.2 c/deg) and high-spatial frequency (4.0 c/deg) Gabor patches and compared them with the Gaussian results. As before, we measured increment thresholds for hue, saturation, and luminance modulations. These color scales were constructed as trajectories along the three perceptual dimensions of color (hue, saturation, and luminance) in two color spaces, uncalibrated HSV and calibrated L*a*b. This allowed us to study how the three perceptual dimensions represent magnitude information for test patterns varying in spatial frequency. This design also allowed us to test the hypothesis that the luminance channel best carries high-spatial frequency information while the saturation channel best represents low spatial-frequency information (Mullen 1985; DeValois and DeValois 1988).

Functional Multi-Locus QTL Mapping of Temporal Trends in Scots Pine Wood Traits

PubMed Central

Li, Zitong; Hallingbäck, Henrik R.; Abrahamsson, Sara; Fries, Anders; Gull, Bengt Andersson; Sillanpää, Mikko J.; García-Gil, M. Rosario

2014-01-01

Quantitative trait loci (QTL) mapping of wood properties in conifer species has focused on single time point measurements or on trait means based on heterogeneous wood samples (e.g., increment cores), thus ignoring systematic within-tree trends. In this study, functional QTL mapping was performed for a set of important wood properties in increment cores from a 17-yr-old Scots pine (Pinus sylvestris L.) full-sib family with the aim of detecting wood trait QTL for general intercepts (means) and for linear slopes by increasing cambial age. Two multi-locus functional QTL analysis approaches were proposed and their performances were compared on trait datasets comprising 2 to 9 time points, 91 to 455 individual tree measurements and genotype datasets of amplified length polymorphisms (AFLP), and single nucleotide polymorphism (SNP) markers. The first method was a multilevel LASSO analysis whereby trend parameter estimation and QTL mapping were conducted consecutively; the second method was our Bayesian linear mixed model whereby trends and underlying genetic effects were estimated simultaneously. We also compared several different hypothesis testing methods under either the LASSO or the Bayesian framework to perform QTL inference. In total, five and four significant QTL were observed for the intercepts and slopes, respectively, across wood traits such as earlywood percentage, wood density, radial fiberwidth, and spiral grain angle. Four of these QTL were represented by candidate gene SNPs, thus providing promising targets for future research in QTL mapping and molecular function. Bayesian and LASSO methods both detected similar sets of QTL given datasets that comprised large numbers of individuals. PMID:25305041

Functional multi-locus QTL mapping of temporal trends in Scots pine wood traits.

PubMed

Li, Zitong; Hallingbäck, Henrik R; Abrahamsson, Sara; Fries, Anders; Gull, Bengt Andersson; Sillanpää, Mikko J; García-Gil, M Rosario

2014-10-09

Quantitative trait loci (QTL) mapping of wood properties in conifer species has focused on single time point measurements or on trait means based on heterogeneous wood samples (e.g., increment cores), thus ignoring systematic within-tree trends. In this study, functional QTL mapping was performed for a set of important wood properties in increment cores from a 17-yr-old Scots pine (Pinus sylvestris L.) full-sib family with the aim of detecting wood trait QTL for general intercepts (means) and for linear slopes by increasing cambial age. Two multi-locus functional QTL analysis approaches were proposed and their performances were compared on trait datasets comprising 2 to 9 time points, 91 to 455 individual tree measurements and genotype datasets of amplified length polymorphisms (AFLP), and single nucleotide polymorphism (SNP) markers. The first method was a multilevel LASSO analysis whereby trend parameter estimation and QTL mapping were conducted consecutively; the second method was our Bayesian linear mixed model whereby trends and underlying genetic effects were estimated simultaneously. We also compared several different hypothesis testing methods under either the LASSO or the Bayesian framework to perform QTL inference. In total, five and four significant QTL were observed for the intercepts and slopes, respectively, across wood traits such as earlywood percentage, wood density, radial fiberwidth, and spiral grain angle. Four of these QTL were represented by candidate gene SNPs, thus providing promising targets for future research in QTL mapping and molecular function. Bayesian and LASSO methods both detected similar sets of QTL given datasets that comprised large numbers of individuals. Copyright © 2014 Li et al.

Cost-effectiveness analysis of an early-initiated, continuous chain of rehabilitation after severe traumatic brain injury.

PubMed

Andelic, Nada; Ye, Jiajia; Tornas, Sveinung; Roe, Cecilie; Lu, Juan; Bautz-Holter, Erik; Moger, Tron; Sigurdardottir, Solrun; Schanke, Anne-Kristine; Aas, Eline

2014-07-15

The aim of this study is to estimate the long-term cost-effectiveness of two different rehabilitation trajectories after severe traumatic brain injury (sTBI). A decision tree model compared hospitalization costs, health effects, and incremental cost-effectiveness ratios (ICER) of a continuous chain versus a broken chain of rehabilitation. The expected costs were estimated by the reimbursement system using diagnosis-related group and based on point estimates of the Disability Rating Scale (DRS); the health effects were measured by means of area under the curve (AUC). The incremental health benefit was estimated as the difference in the AUCs between the chains. Lower values on the DRS scale indicate better health; thus, smaller AUCs were preferred. The modeled population was a cohort of 59 patients with sTBI (30 in continuous chain; 29 in broken chain) with 6-weeks, 1-year, and 5-year post-injury follow-ups. Regarding the DRS estimates, 5-year AUCs were 19.40 (continuous chain) and 23.46 (broken chain). Across 5 years, the continuous chain of rehabilitation had lower costs and better health effects. By replacing the broken chain with the continuous chain, NOK 37.000 could be saved and 4.06 DRS points gained. By means of probabilistic sensitivity analysis, the majority of ICER estimates (67% of the Monte Carlo simulations) indicated that a continuous chain of rehabilitation was less costly and more effective. These findings indicate that the trajectory of continuous rehabilitation represents a dominant strategy in that it reduces costs and improves outcomes after sTBI under reasonable assumptions.

Preoperative paravertebral blocks for the management of acute pain following mastectomy: a cost-effectiveness analysis.

PubMed

Offodile, Anaeze C; Sheckter, Clifford C; Tucker, Austin; Watzker, Anna; Ottino, Kevin; Zammert, Martin; Padula, William V

2017-10-01

Preoperative paravertebral blocks (PPVBs) are routinely used for treating post-mastectomy pain, yet uncertainties remain about the cost-effectiveness of this modality. We aim to evaluate the cost-effectiveness of PPVBs at common willingness-to-pay (WTP) thresholds. A decision analytic model compared two strategies: general anesthesia (GA) alone versus GA with multilevel PPVB. For the GA plus PPVB limb, patients were subjected to successful block placement versus varying severity of complications based on literature-derived probabilities. The need for rescue pain medication was the terminal node for all postoperative scenarios. Patient-reported pain scores sourced from published meta-analyses measured treatment effectiveness. Costing was derived from wholesale acquisition costs, the Medicare fee schedule, and publicly available hospital charge masters. Charges were converted to costs and adjusted for 2016 US dollars. A commercial payer perspective was adopted. Incremental cost-effectiveness ratios (ICERs) were evaluated against WTP thresholds of $500 and $50,000 for postoperative pain control. The ICER for preoperative paravertebral blocks was $154.49 per point reduction in pain score. 15% variation in inpatient costs resulted in ICER values ranging from $124.40-$180.66 per pain point score reduction. Altering the probability of block success by 5% generated ICER values of $144.71-$163.81 per pain score reduction. Probabilistic sensitivity analysis yielded cost-effective trials 69.43% of the time at $500 WTP thresholds. Over a broad range of probabilities, PPVB in mastectomy reduces postoperative pain at an acceptable incremental cost compared to GA. Commercial payers should be persuaded to reimburse this technique based on convincing evidence of cost-effectiveness.

ATVB Council Statement: Non-statin LDL-lowering Therapy and Cardiovascular Risk Reduction

PubMed Central

Hegele, Robert A.; Gidding, Samuel S.; Ginsberg, Henry N.; McPherson, Ruth; Raal, Frederick J.; Rader, Daniel J.; Robinson, Jennifer G.; Welty, Francine K.

2015-01-01

Pharmacologic reduction of low-density lipoprotein (LDL) cholesterol using statin drugs is foundational therapy to reduce cardiovascular disease (CVD) risk. Here we consider the place of non-statin therapies that also reduce LDL cholesterol in prevention of CVD. Among conventional non-statins, placebo-controlled randomized clinical trials showed that bile acid sequestrants, niacin and fibrates given as monotherapy each reduce CVD end points. From trials in which patients’ LDL cholesterol was already well-controlled on a statin, adding ezetimibe incrementally reduced CVD end points, while adding a fibrate or niacin showed no incremental benefit. Among emerging non-statins, monoclonal antibodies against proprotein convertase subtilisin kexin type 9 (PCSK9) added to a statin and given for up to 78 weeks showed preliminary evidence of reductions in CVD outcomes. While these promising early findings contributed to the recent approval of these agents in Europe and the US, much larger and longer duration outcomes studies are ongoing for definitive proof of CVD benefits. Other non-statin agents recently approved in the US include lomitapide and mipomersen, which both act via distinctive LDL-receptor independent mechanisms to substantially reduce LDL cholesterol in homozygous familial hypercholesterolemia. We also address some unanswered questions, including measuring alternative biochemical variables to LDL cholesterol, evidence for treating children with monitoring of subclinical atherosclerosis, and potential risks of extremely low LDL cholesterol. As evidence for benefit in CVD prevention accumulates, we anticipate that clinical practice will shift towards more assertive LDL-lowering treatment, using both statins and non-statins initiated earlier in appropriately selected patients. PMID:26376908

The 100 brigthest Blue Straggler Stars.

NASA Astrophysics Data System (ADS)

Morales Durán, C.; Llorente de Andrés, F.; Ahumada, J. A.

2015-05-01

Blue straggler stars (BSS) are characterized by their appearance in the CMD of globular and open clusters, in the Main Sequence extension, above the turn-off and blueward of this. In accordance with the Standard Theory of stellar evolution, BSS should be out of the Main Sequence and over the Giant Branch if they really belong to the cluster and are formed at the same time than the rest of cluster stars. There are several theories that try to explain the existence of BSS but at present prevails the idea that they can be the product of mass transfer in binaries (McCrea, 1964), and the luminosity of the receiver star is incremented in such a way that now it is over the Main Sequence turn-off point of its cluster. Also it is believed that they are the result of stellar fussion of two or several stars, specially in dense systems as the globular cluster nucleus. This work is focalised in all the BSS brihgter the V = 10 mag. that we have been able to identify in open clusters. It is a sample unprecedented by its number and as well it is a sample with plentiful observational information, it is why we hope to be able to assure their membership to the parent cluster and obtain reliable information about their possible origin.

[Networks, disease management programs, GP coordinator: analysis of recent ambulatory reforms in Germany].

PubMed

Giovanella, Ligia

2011-01-01

Strengthening the role of the general practitioner in the conduction and coordination of specialized, inpatient and social care to ensure the continuity is a trend observed in recent health reforms in European countries. In Germany, from the second half of the 1990s, driven by economic pressures, a specific legislation and initiatives of the providers themselves have developed new organizational structures and care models for the purpose of the integration of the health care system and the coordination of health care in the form of: physicians networks, practitioner coordinator model, diseases management programs and integrated care. From a literature review, document analysis, visits to services and interviews with key informants, this paper analyzes the dynamics of these organizational changes in the German outpatient sector. The mechanisms of integration and coordination proposed are examined, and the potential impacts on the efficiency and quality of new organizational arrangements are discussed. Also it is analyzed the reasons and interests involved that point out the obstacles to the implementation. It was observed the process of an incremental reform with a tendency of diversification of the healthcare panorama in Germany with the presence of integrated models of care and strengthening the role of general practitioners in the coordination of patient care.

Acoustic emission evaluation of reinforced concrete bridge beam with graphite composite laminate

NASA Astrophysics Data System (ADS)

Johnson, Dan E.; Shen, H. Warren; Finlayson, Richard D.

2001-07-01

A test was recently conducted on August 1, 2000 at the FHwA Non-Destructive Evaluation Validation Center, sponsored by The New York State DOT, to evaluate a graphite composite laminate as an effective form of retrofit for reinforced concrete bridge beam. One portion of this testing utilized Acoustic Emission Monitoring for Evaluation of the beam under test. Loading was applied to this beam using a two-point loading scheme at FHwA's facility. This load was applied in several incremental loadings until the failure of the graphite composite laminate took place. Each loading culminated by either visual crack location or large audible emissions from the beam. Between tests external cracks were located visually and highlighted and the graphite epoxy was checked for delamination. Acoustic Emission data was collected to locate cracking areas of the structure during the loading cycles. To collect this Acoustic Emission data, FHwA and NYSDOT utilized a Local Area Monitor, an Acoustic Emission instrument developed in a cooperative effort between FHwA and Physical Acoustics Corporation. Eight Acoustic Emission sensors were attached to the structure, with four on each side, in a symmetrical fashion. As testing progressed and culminated with beam failure, Acoustic Emission data was gathered and correlated against time and test load. This paper will discuss the analysis of this test data.

Host-Guest Interaction between Herbicide Oxadiargyl and Hydroxypropyl-β-Cyclodextrin

PubMed Central

Benfeito, Sofia; Borges, Fernanda; Garrido, E. Manuela

2013-01-01

In the face of a growing human population and increased urbanization, the demand for pesticides will simply rise. Farmers must escalate yields on increasingly fewer farm acres. However, the risks of pesticides, whether real or perceived, may force changes in the way these chemicals are used. Scientists are working toward pest control plans that are environmentally sound, effective, and profitable. In this context the development of new pesticide formulations which may improve application effectiveness, safety, handling, and storage can be pointed out as a solution. As a contribution to the area, the microencapsulation of the herbicide oxadiargyl (OXA) in (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) was performed. The study was conducted in different aqueous media (ultrapure water and in different pH buffer solutions). In all cases an increment of the oxadiargyl solubility as a function of the HP-β-CD concentration that has been related to the formation of an inclusion complex was verified. UV-Vis and NMR experiments allowed concluding that the stoichiometry of the OXA/HP-β-CD complex formed is 1 : 1. The gathered results can be regarded as an important step for its removal from industrial effluents and/or to increase the stabilizing action, encapsulation, and adsorption in water treatment plants. PMID:24396310

Data Base Design with GIS in Ecosystem Based Multiple Use Forest Management in Artvin, Turkey: A Case Study in Balcı Forest Management Planning Unit.

PubMed

Yolasığmaz, Hacı Ahmet; Keleş, Sedat

2009-01-01

In Turkey, the understanding of planning focused on timber production has given its place on Multiple Use Management (MUM). Because the whole infrastructure of forestry with inventory system leading the way depends on timber production, some cases of bottle neck are expected during the transition period. Database design, probably the most important stage during the transition to MUM, together with the digital basic maps making up the basis of this infrastructure constitute the main point of this article. Firstly, the forest management philosophy of Turkey in the past was shortly touched upon in the article. Ecosystem Based Multiple Use Forest Management (EBMUFM) approaches was briefly introduced. The second stage of the process of EBMUFM, database design was described by examining the classical planning infrastructure and the coverage to be produced and consumed were suggested in the form of lists. At the application stage, two different geographical databases were established with GIS in Balcı Planning Unit of the years 1984 and 2006. Following that the related basic maps are produced. Timely diversity of the planning unit of 20 years is put forward comparatively with regard to the stand parameters such as tree types, age class, development stage, canopy closure, mixture, volume and increment.

Design of air-gapped magnetic-core inductors for superimposed direct and alternating currents

NASA Technical Reports Server (NTRS)

Ohri, A. K.; Wilson, T. G.; Owen, H. A., Jr.

1976-01-01

Using data on standard magnetic-material properties and standard core sizes for air-gap-type cores, an algorithm designed for a computer solution is developed which optimally determines the air-gap length and locates the quiescent point on the normal magnetization curve so as to yield an inductor design with the minimum number of turns for a given ac voltage and frequency and with a given dc bias current superimposed in the same winding. Magnetic-material data used in the design are the normal magnetization curve and a family of incremental permeability curves. A second procedure, which requires a simpler set of calculations, starts from an assigned quiescent point on the normal magnetization curve and first screens candidate core sizes for suitability, then determines the required turns and air-gap length.

Comparison of four MPPT techniques for PV systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atik, L., E-mail: lotfi.atik@univ-usto.dz; Ternifi, Z. T.; Université de Lorraine, LMOPS, EA 4423, 57070 Metz

2016-07-25

The working behavior of a module / PV array is non-linear and highly dependent on working conditions. As a given condition, there is only one point at which the level of available power at its output is maximum. This point varies with time, enlightenment and temperature. To ensure optimum operation, the use of MPPT control allows us to extract the maximum power. This paper presents a comparative study of four widely-adopted MPPT algorithms, such as Perturb and Observe, Incremental Conductance, Measurements of the variation of the open circuit voltage or of the short-circuit current. Their performance is evaluated using, formore » all these techniques. In particular, this study compares the behaviors of each technique in presence of solar irradiation variations and temperature fluctuations. These MPPT techniques will be compared using the Matlab / Simulink tool.« less

Analysis of Tube Free Hydroforming using an Inverse Approach with FLD-based Adjustment of Process Parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Johnson, Kenneth I.; Khaleel, Mohammad A.

2003-04-01

This paper employs an inverse approach (IA) formulation for the analysis of tubes under free hydroforming conditions. The IA formulation is derived from that of Guo et al. established for flat sheet hydroforming analysis using constant strain triangular membrane elements. At first, an incremental analysis of free hydroforming for a hot-dip galvanized (HG/Z140) DP600 tube is performed using the finite element Marc code. The deformed geometry obtained at the last converged increment is then used as the final configuration in the inverse analysis. This comparative study allows us to assess the predicting capability of the inverse analysis. The results willmore » be compared with the experimental values determined by Asnafi and Skogsgardh. After that, a procedure based on a forming limit diagram (FLD) is proposed to adjust the process parameters such as the axial feed and internal pressure. Finally, the adjustment process is illustrated through a re-analysis of the same tube using the inverse approach« less

Analysis of Tube Hydroforming by means of an Inverse Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Johnson, Kenneth I.; Khaleel, Mohammad A.

2003-05-01

This paper presents a computational tool for the analysis of freely hydroformed tubes by means of an inverse approach. The formulation of the inverse method developed by Guo et al. is adopted and extended to the tube hydrofoming problems in which the initial geometry is a round tube submitted to hydraulic pressure and axial feed at the tube ends (end-feed). A simple criterion based on a forming limit diagram is used to predict the necking regions in the deformed workpiece. Although the developed computational tool is a stand-alone code, it has been linked to the Marc finite element code formore » meshing and visualization of results. The application of the inverse approach to tube hydroforming is illustrated through the analyses of the aluminum alloy AA6061-T4 seamless tubes under free hydroforming conditions. The results obtained are in good agreement with those issued from a direct incremental approach. However, the computational time in the inverse procedure is much less than that in the incremental method.« less

The Value of Medical and Pharmaceutical Interventions for Reducing Obesity

PubMed Central

Michaud, Pierre-Carl; Goldman, Dana; Lakdawalla, Darius; Zheng, Yuhui; Gailey, Adam H.

2012-01-01

This paper attempts to quantify the social, private, and public-finance values of reducing obesity through pharmaceutical and medical interventions. We find that the total social value of bariatric surgery is large for treated patients, with incremental social cost-effectiveness ratios typically under $10,000 per life-year saved. On the other hand, pharmaceutical interventions against obesity yield much less social value with incremental social cost-effectiveness ratios around $50,000. Our approach accounts for: competing risks to life expectancy; health care costs; and a variety of non-medical economic consequences (pensions, disability insurance, taxes, and earnings), which account for 20% of the total social cost of these treatments. On balance, bariatric surgery generates substantial private value for those treated, in the form of health and other economic consequences. The net public fiscal effects are modest, primarily because the size of the population eligible for treatment is small while the net social effect is large once improvements in life expectancy are taken into account. PMID:22705389

The value of medical and pharmaceutical interventions for reducing obesity.

PubMed

Michaud, Pierre-Carl; Goldman, Dana P; Lakdawalla, Darius N; Zheng, Yuhui; Gailey, Adam H

2012-07-01

This paper attempts to quantify the social, private, and public-finance values of reducing obesity through pharmaceutical and medical interventions. We find that the total social value of bariatric surgery is large for treated patients, with incremental social cost-effectiveness ratios typically under $10,000 per life-year saved. On the other hand, pharmaceutical interventions against obesity yield much less social value with incremental social cost-effectiveness ratios around $50,000. Our approach accounts for: competing risks to life expectancy; health care costs; and a variety of non-medical economic consequences (pensions, disability insurance, taxes, and earnings), which account for 20% of the total social cost of these treatments. On balance, bariatric surgery generates substantial private value for those treated, in the form of health and other economic consequences. The net public fiscal effects are modest, primarily because the size of the population eligible for treatment is small. The net social effect is large once improvements in life expectancy are taken into account. Copyright © 2012 Elsevier B.V. All rights reserved.

Multicriteria mapping of stakeholder preferences in regulating nanotechnology.

PubMed

Hansen, Steffen Foss

2010-08-01

In order to facilitate stakeholder discussions on how to regulate nanotechnology, the opensource program multicriteria mapping (MCM) was used to structure 26 interviews with stakeholders in the USA. MCM offers a systematic part quantitative, part qualitative approach to clarify why some regulatory options (bans, moratoriums, voluntary measures, etc.) were deemed to be acceptable/unacceptable by various stakeholders and which criteria stakeholders used to evaluate the different regulatory options. Adopting an incremental approach and implementing a new regulatory framework was evaluated as the best options whereas a complete ban and no additional regulation of nanotechnology were found to be the least favorable. Criteria applied differed substantially among stakeholders and included social, ethical, regulatory, environmental, and health issues. Opinions on future regulation seem far less polarized than expected and it seems that stakeholders would welcome a combination of voluntary measures, an incremental approach and forming of a new regulatory framework. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11051-010-0006-3) contains supplementary material, which is available to authorized users.

Method and apparatus for stabilizing pulsed microwave amplifiers

DOEpatents

Hopkins, Donald B.

1993-01-01

Phase and amplitude variations at the output of a high power pulsed microwave amplifier arising from instabilities of the driving electron beam are suppressed with a feed-forward system that can stabilize pulses which are too brief for regulation by conventional feedback techniques. Such variations tend to be similar during successive pulses. The variations are detected during each pulse by comparing the amplifier output with the low power input signal to obtain phase and amplitude error signals. This enables storage of phase and amplitude correction signals which are used to make compensating changes in the low power input signal during the following amplifier output pulse which suppress the variations. In the preferred form of the invention, successive increments of the correction signals for each pulse are stored in separate channels of a multi-channel storage. Sequential readout of the increments during the next pulse provides variable control voltages to a voltage controlled phase shifter and voltage controlled amplitude modulator in the amplifier input signal path.

Method and apparatus for stabilizing pulsed microwave amplifiers

DOEpatents

Hopkins, D.B.

1993-01-26

Phase and amplitude variations at the output of a high power pulsed microwave amplifier arising from instabilities of the driving electron beam are suppressed with a feed-forward system that can stabilize pulses which are too brief for regulation by conventional feedback techniques. Such variations tend to be similar during successive pulses. The variations are detected during each pulse by comparing the amplifier output with the low power input signal to obtain phase and amplitude error signals. This enables storage of phase and amplitude correction signals which are used to make compensating changes in the low power input signal during the following amplifier output pulse which suppress the variations. In the preferred form of the invention, successive increments of the correction signals for each pulse are stored in separate channels of a multi-channel storage. Sequential readout of the increments during the next pulse provides variable control voltages to a voltage controlled phase shifter and voltage controlled amplitude modulator in the amplifier input signal path.

The incremental value of self-reported mental health measures in predicting functional outcomes of veterans.

PubMed

Eisen, Susan V; Bottonari, Kathryn A; Glickman, Mark E; Spiro, Avron; Schultz, Mark R; Herz, Lawrence; Rosenheck, Robert; Rofman, Ethan S

2011-04-01

Research on patient-centered care supports use of patient/consumer self-report measures in monitoring health outcomes. This study examined the incremental value of self-report mental health measures relative to a clinician-rated measure in predicting functional outcomes among mental health service recipients. Participants (n = 446) completed the Behavior and Symptom Identification Scale, the Brief Symptom Inventory, and the Veterans/Rand Short Form-36 at enrollment in the study (T1) and 3 months later (T2). Global Assessment of Functioning (GAF) ratings, mental health service utilization, and psychiatric diagnoses were obtained from administrative data files. Controlling for demographic and clinical variables, results indicated that improvement based on the self-report measures significantly predicted one or more functional outcomes (i.e., decreased likelihood of post-enrollment psychiatric hospitalization and increased likelihood of paid employment), above and beyond the predictive value of the GAF. Inclusion of self-report measures may be a useful addition to performance measurement efforts.