RJMCMC based Text Placement to Optimize Label Placement and Quantity

NASA Astrophysics Data System (ADS)

Touya, Guillaume; Chassin, Thibaud

2018-05-01

Label placement is a tedious task in map design, and its automation has long been a goal for researchers in cartography, but also in computational geometry. Methods that search for an optimal or nearly optimal solution that satisfies a set of constraints, such as label overlapping, have been proposed in the literature. Most of these methods mainly focus on finding the optimal position for a given set of labels, but rarely allow the removal of labels as part of the optimization. This paper proposes to apply an optimization technique called Reversible-Jump Markov Chain Monte Carlo that enables to easily model the removal or addition during the optimization iterations. The method, quite preliminary for now, is tested on a real dataset, and the first results are encouraging.

Artificial Intelligence based technique for BTS placement

NASA Astrophysics Data System (ADS)

Alenoghena, C. O.; Emagbetere, J. O.; Aibinu, A. M.

2013-12-01

The increase of the base transceiver station (BTS) in most urban areas can be traced to the drive by network providers to meet demand for coverage and capacity. In traditional network planning, the final decision of BTS placement is taken by a team of radio planners, this decision is not fool proof against regulatory requirements. In this paper, an intelligent based algorithm for optimal BTS site placement has been proposed. The proposed technique takes into consideration neighbour and regulation considerations objectively while determining cell site. The application will lead to a quantitatively unbiased evaluated decision making process in BTS placement. An experimental data of a 2km by 3km territory was simulated for testing the new algorithm, results obtained show a 100% performance of the neighbour constrained algorithm in BTS placement optimization. Results on the application of GA with neighbourhood constraint indicate that the choices of location can be unbiased and optimization of facility placement for network design can be carried out.

The optimization of nuclear power plants operation modes in emergency situations

NASA Astrophysics Data System (ADS)

Zagrebayev, A. M.; Trifonenkov, A. V.; Ramazanov, R. N.

2018-01-01

An emergency situations resulting in the necessity for temporary reactor trip may occur at the nuclear power plant while normal operating mode. The paper deals with some of the operation c aspects of nuclear power plant operation in emergency situations and during threatened period. The xenon poisoning causes limitations on the variety of statements of the problem of calculating characteristics of a set of optimal reactor power off controls. The article show a possibility and feasibility of new sets of optimization tasks for the operation of nuclear power plants under conditions of xenon poisoning in emergency circumstances.

3D sensor placement strategy using the full-range pheromone ant colony system

NASA Astrophysics Data System (ADS)

Shuo, Feng; Jingqing, Jia

2016-07-01

An optimized sensor placement strategy will be extremely beneficial to ensure the safety and cost reduction considerations of structural health monitoring (SHM) systems. The sensors must be placed such that important dynamic information is obtained and the number of sensors is minimized. The practice is to select individual sensor directions by several 1D sensor methods and the triaxial sensors are placed in these directions for monitoring. However, this may lead to non-optimal placement of many triaxial sensors. In this paper, a new method, called FRPACS, is proposed based on the ant colony system (ACS) to solve the optimal placement of triaxial sensors. The triaxial sensors are placed as single units in an optimal fashion. And then the new method is compared with other algorithms using Dalian North Bridge. The computational precision and iteration efficiency of the FRPACS has been greatly improved compared with the original ACS and EFI method.

Self-deployable mobile sensor networks for on-demand surveillance

NASA Astrophysics Data System (ADS)

Miao, Lidan; Qi, Hairong; Wang, Feiyi

2005-05-01

This paper studies two interconnected problems in mobile sensor network deployment, the optimal placement of heterogeneous mobile sensor platforms for cost-efficient and reliable coverage purposes, and the self-organizable deployment. We first develop an optimal placement algorithm based on a "mosaicked technology" such that different types of mobile sensors form a mosaicked pattern uniquely determined by the popularity of different types of sensor nodes. The initial state is assumed to be random. In order to converge to the optimal state, we investigate the swarm intelligence (SI)-based sensor movement strategy, through which the randomly deployed sensors can self-organize themselves to reach the optimal placement state. The proposed algorithm is compared with the random movement and the centralized method using performance metrics such as network coverage, convergence time, and energy consumption. Simulation results are presented to demonstrate the effectiveness of the mosaic placement and the SI-based movement.

Germination Conditions For Poison Ivy

Treesearch

Nathan M. Schiff; Kristina F. Connor; Margaret S. Devall

2004-01-01

Several scarification and stratification treatments were tested to optimize germination conditions for poison ivy [Toxicodendron radicans (L.) Kunst]. Fall-collected seeds soaked for 1 hour in water showed increasing germination with increasing stratification. Scarification with concentrated sulphuric acid for 30 minutes resulted in approximately 65...

On a distinctive feature of problems of calculating time-average characteristics of nuclear reactor optimal control sets

NASA Astrophysics Data System (ADS)

Trifonenkov, A. V.; Trifonenkov, V. P.

2017-01-01

This article deals with a feature of problems of calculating time-average characteristics of nuclear reactor optimal control sets. The operation of a nuclear reactor during threatened period is considered. The optimal control search problem is analysed. The xenon poisoning causes limitations on the variety of statements of the problem of calculating time-average characteristics of a set of optimal reactor power off controls. The level of xenon poisoning is limited. There is a problem of choosing an appropriate segment of the time axis to ensure that optimal control problem is consistent. Two procedures of estimation of the duration of this segment are considered. Two estimations as functions of the xenon limitation were plot. Boundaries of the interval of averaging are defined more precisely.

Optimal Trajectories Generation in Robotic Fiber Placement Systems

NASA Astrophysics Data System (ADS)

Gao, Jiuchun; Pashkevich, Anatol; Caro, Stéphane

2017-06-01

The paper proposes a methodology for optimal trajectories generation in robotic fiber placement systems. A strategy to tune the parameters of the optimization algorithm at hand is also introduced. The presented technique transforms the original continuous problem into a discrete one where the time-optimal motions are generated by using dynamic programming. The developed strategy for the optimization algorithm tuning allows essentially reducing the computing time and obtaining trajectories satisfying industrial constraints. Feasibilities and advantages of the proposed methodology are confirmed by an application example.

Geometric Reasoning for Automated Planning

NASA Technical Reports Server (NTRS)

Clement, Bradley J.; Knight, Russell L.; Broderick, Daniel

2012-01-01

An important aspect of mission planning for NASA s operation of the International Space Station is the allocation and management of space for supplies and equipment. The Stowage, Configuration Analysis, and Operations Planning teams collaborate to perform the bulk of that planning. A Geometric Reasoning Engine is developed in a way that can be shared by the teams to optimize item placement in the context of crew planning. The ISS crew spends (at the time of this writing) a third or more of their time moving supplies and equipment around. Better logistical support and optimized packing could make a significant impact on operational efficiency of the ISS. Currently, computational geometry and motion planning do not focus specifically on the optimized orientation and placement of 3D objects based on multiple distance and containment preferences and constraints. The software performs reasoning about the manipulation of 3D solid models in order to maximize an objective function based on distance. It optimizes for 3D orientation and placement. Spatial placement optimization is a general problem and can be applied to object packing or asset relocation.

Optimal sensor placement for leak location in water distribution networks using genetic algorithms.

PubMed

Casillas, Myrna V; Puig, Vicenç; Garza-Castañón, Luis E; Rosich, Albert

2013-11-04

This paper proposes a new sensor placement approach for leak location in water distribution networks (WDNs). The sensor placement problem is formulated as an integer optimization problem. The optimization criterion consists in minimizing the number of non-isolable leaks according to the isolability criteria introduced. Because of the large size and non-linear integer nature of the resulting optimization problem, genetic algorithms (GAs) are used as the solution approach. The obtained results are compared with a semi-exhaustive search method with higher computational effort, proving that GA allows one to find near-optimal solutions with less computational load. Moreover, three ways of increasing the robustness of the GA-based sensor placement method have been proposed using a time horizon analysis, a distance-based scoring and considering different leaks sizes. A great advantage of the proposed methodology is that it does not depend on the isolation method chosen by the user, as long as it is based on leak sensitivity analysis. Experiments in two networks allow us to evaluate the performance of the proposed approach.

Optimal Sensor Placement for Leak Location in Water Distribution Networks Using Genetic Algorithms

PubMed Central

Casillas, Myrna V.; Puig, Vicenç; Garza-Castañón, Luis E.; Rosich, Albert

2013-01-01

This paper proposes a new sensor placement approach for leak location in water distribution networks (WDNs). The sensor placement problem is formulated as an integer optimization problem. The optimization criterion consists in minimizing the number of non-isolable leaks according to the isolability criteria introduced. Because of the large size and non-linear integer nature of the resulting optimization problem, genetic algorithms (GAs) are used as the solution approach. The obtained results are compared with a semi-exhaustive search method with higher computational effort, proving that GA allows one to find near-optimal solutions with less computational load. Moreover, three ways of increasing the robustness of the GA-based sensor placement method have been proposed using a time horizon analysis, a distance-based scoring and considering different leaks sizes. A great advantage of the proposed methodology is that it does not depend on the isolation method chosen by the user, as long as it is based on leak sensitivity analysis. Experiments in two networks allow us to evaluate the performance of the proposed approach. PMID:24193099

Joint Optimization of Receiver Placement and Illuminator Selection for a Multiband Passive Radar Network.

PubMed

Xie, Rui; Wan, Xianrong; Hong, Sheng; Yi, Jianxin

2017-06-14

The performance of a passive radar network can be greatly improved by an optimal radar network structure. Generally, radar network structure optimization consists of two aspects, namely the placement of receivers in suitable places and selection of appropriate illuminators. The present study investigates issues concerning the joint optimization of receiver placement and illuminator selection for a passive radar network. Firstly, the required radar cross section (RCS) for target detection is chosen as the performance metric, and the joint optimization model boils down to the partition p -center problem (PPCP). The PPCP is then solved by a proposed bisection algorithm. The key of the bisection algorithm lies in solving the partition set covering problem (PSCP), which can be solved by a hybrid algorithm developed by coupling the convex optimization with the greedy dropping algorithm. In the end, the performance of the proposed algorithm is validated via numerical simulations.

Optimal sensor placement for deployable antenna module health monitoring in SSPS using genetic algorithm

NASA Astrophysics Data System (ADS)

Yang, Chen; Zhang, Xuepan; Huang, Xiaoqi; Cheng, ZhengAi; Zhang, Xinghua; Hou, Xinbin

2017-11-01

The concept of space solar power satellite (SSPS) is an advanced system for collecting solar energy in space and transmitting it wirelessly to earth. However, due to the long service life, in-orbit damage may occur in the structural system of SSPS. Therefore, sensor placement layouts for structural health monitoring should be firstly considered in this concept. In this paper, based on genetic algorithm, an optimal sensor placement method for deployable antenna module health monitoring in SSPS is proposed. According to the characteristics of the deployable antenna module, the designs of sensor placement are listed. Furthermore, based on effective independence method and effective interval index, a combined fitness function is defined to maximize linear independence in targeted modes while simultaneously avoiding redundant information at nearby positions. In addition, by considering the reliability of sensors located at deployable mechanisms, another fitness function is constituted. Moreover, the solution process of optimal sensor placement by using genetic algorithm is clearly demonstrated. At last, a numerical example about the sensor placement layout in a deployable antenna module of SSPS is presented, which by synthetically considering all the above mentioned performances. All results can illustrate the effectiveness and feasibility of the proposed sensor placement method in SSPS.

Effect of spatial variability of storm on the optimal placement of best management practices (BMPs).

PubMed

Chang, C L; Chiueh, P T; Lo, S L

2007-12-01

It is significant to design best management practices (BMPs) and determine the proper BMPs placement for the purpose that can not only satisfy the water quantity and water quality standard, but also lower the total cost of BMPs. The spatial rainfall variability can have much effect on its relative runoff and non-point source pollution (NPSP). Meantime, the optimal design and placement of BMPs would be different as well. The objective of this study was to discuss the relationship between the spatial variability of rainfall and the optimal BMPs placements. Three synthetic rainfall storms with varied spatial distributions, including uniform rainfall, downstream rainfall and upstream rainfall, were designed. WinVAST model was applied to predict runoff and NPSP. Additionally, detention pond and swale were selected for being structural BMPs. Scatter search was applied to find the optimal BMPs placement. The results show that mostly the total cost of BMPs is higher in downstream rainfall than in upstream rainfall or uniform rainfall. Moreover, the cost of detention pond is much higher than swale. Thus, even though detention pond has larger efficiency for lowering peak flow and pollutant exports, it is not always the determined set in each subbasin.

Topography-based Flood Planning and Optimization Capability Development Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judi, David R.; Tasseff, Byron A.; Bent, Russell W.

2014-02-26

Globally, water-related disasters are among the most frequent and costly natural hazards. Flooding inflicts catastrophic damage on critical infrastructure and population, resulting in substantial economic and social costs. NISAC is developing LeveeSim, a suite of nonlinear and network optimization models, to predict optimal barrier placement to protect critical regions and infrastructure during flood events. LeveeSim currently includes a high-performance flood model to simulate overland flow, as well as a network optimization model to predict optimal barrier placement during a flood event. The LeveeSim suite models the effects of flooding in predefined regions. By manipulating a domain’s underlying topography, developers alteredmore » flood propagation to reduce detrimental effects in areas of interest. This numerical altering of a domain’s topography is analogous to building levees, placing sandbags, etc. To induce optimal changes in topography, NISAC used a novel application of an optimization algorithm to minimize flooding effects in regions of interest. To develop LeveeSim, NISAC constructed and coupled hydrodynamic and optimization algorithms. NISAC first implemented its existing flood modeling software to use massively parallel graphics processing units (GPUs), which allowed for the simulation of larger domains and longer timescales. NISAC then implemented a network optimization model to predict optimal barrier placement based on output from flood simulations. As proof of concept, NISAC developed five simple test scenarios, and optimized topographic solutions were compared with intuitive solutions. Finally, as an early validation example, barrier placement was optimized to protect an arbitrary region in a simulation of the historic Taum Sauk dam breach.« less

Data-driven sensor placement from coherent fluid structures

NASA Astrophysics Data System (ADS)

Manohar, Krithika; Kaiser, Eurika; Brunton, Bingni W.; Kutz, J. Nathan; Brunton, Steven L.

2017-11-01

Optimal sensor placement is a central challenge in the prediction, estimation and control of fluid flows. We reinterpret sensor placement as optimizing discrete samples of coherent fluid structures for full state reconstruction. This permits a drastic reduction in the number of sensors required for faithful reconstruction, since complex fluid interactions can often be described by a small number of coherent structures. Our work optimizes point sensors using the pivoted matrix QR factorization to sample coherent structures directly computed from flow data. We apply this sampling technique in conjunction with various data-driven modal identification methods, including the proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD). In contrast to POD-based sensors, DMD demonstrably enables the optimization of sensors for prediction in systems exhibiting multiple scales of dynamics. Finally, reconstruction accuracy from pivot sensors is shown to be competitive with sensors obtained using traditional computationally prohibitive optimization methods.

Development of Decision-Making Automated System for Optimal Placement of Physical Access Control System’s Elements

NASA Astrophysics Data System (ADS)

Danilova, Olga; Semenova, Zinaida

2018-04-01

The objective of this study is a detailed analysis of physical protection systems development for information resources. The optimization theory and decision-making mathematical apparatus is used to formulate correctly and create an algorithm of selection procedure for security systems optimal configuration considering the location of the secured object’s access point and zones. The result of this study is a software implementation scheme of decision-making system for optimal placement of the physical access control system’s elements.

Spatial and temporal optimization in habitat placement for a threatened plant: the case of the western prairie fringed orchid

Treesearch

John Hof; Carolyn Hull Sieg; Michael Bevers

1999-01-01

This paper investigates an optimization approach to determining the placement and timing of habitat protection for the western prairie fringed orchid. This plant’s population dynamics are complex, creating a challenging optimization problem. The sensitivity of the orchid to random climate conditions is handled probabilistically. The plant’s seed, protocorm and above-...

An Effective Mechanism for Virtual Machine Placement using Aco in IAAS Cloud

NASA Astrophysics Data System (ADS)

Shenbaga Moorthy, Rajalakshmi; Fareentaj, U.; Divya, T. K.

2017-08-01

Cloud computing provides an effective way to dynamically provide numerous resources to meet customer demands. A major challenging problem for cloud providers is designing efficient mechanisms for optimal virtual machine Placement (OVMP). Such mechanisms enable the cloud providers to effectively utilize their available resources and obtain higher profits. In order to provide appropriate resources to the clients an optimal virtual machine placement algorithm is proposed. Virtual machine placement is NP-Hard problem. Such NP-Hard problem can be solved using heuristic algorithm. In this paper, Ant Colony Optimization based virtual machine placement is proposed. Our proposed system focuses on minimizing the cost spending in each plan for hosting virtual machines in a multiple cloud provider environment and the response time of each cloud provider is monitored periodically, in such a way to minimize delay in providing the resources to the users. The performance of the proposed algorithm is compared with greedy mechanism. The proposed algorithm is simulated in Eclipse IDE. The results clearly show that the proposed algorithm minimizes the cost, response time and also number of migrations.

Field development planning using simulated annealing - optimal economic well scheduling and placement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckner, B.L.; Xong, X.

1995-12-31

A method for optimizing the net present value of a full field development by varying the placement and sequence of production wells is presented. This approach is automated and combines an economics package and Mobil`s in-house simulator, PEGASUS, within a simulated annealing optimization engine. A novel framing of the well placement and scheduling problem as a classic {open_quotes}travelling salesman problem{close_quotes} is required before optimization via simulated annealing can be applied practically. An example of a full field development using this technique shows that non-uniform well spacings are optimal (from an NPV standpoint) when the effects of well interference and variablemore » reservoir properties are considered. Examples of optimizing field NPV with variable well costs also show that non-uniform wells spacings are optimal. Project NPV increases of 25 to 30 million dollars were shown using the optimal, nonuniform development versus reasonable, uniform developments. The ability of this technology to deduce these non-uniform well spacings opens up many potential applications that should materially impact the economic performance of field developments.« less

Toward Optimal Target Placement for Neural Prosthetic Devices

PubMed Central

Cunningham, John P.; Yu, Byron M.; Gilja, Vikash; Ryu, Stephen I.; Shenoy, Krishna V.

2008-01-01

Neural prosthetic systems have been designed to estimate continuous reach trajectories (motor prostheses) and to predict discrete reach targets (communication prostheses). In the latter case, reach targets are typically decoded from neural spiking activity during an instructed delay period before the reach begins. Such systems use targets placed in radially symmetric geometries independent of the tuning properties of the neurons available. Here we seek to automate the target placement process and increase decode accuracy in communication prostheses by selecting target locations based on the neural population at hand. Motor prostheses that incorporate intended target information could also benefit from this consideration. We present an optimal target placement algorithm that approximately maximizes decode accuracy with respect to target locations. In simulated neural spiking data fit from two monkeys, the optimal target placement algorithm yielded statistically significant improvements up to 8 and 9% for two and sixteen targets, respectively. For four and eight targets, gains were more modest, as the target layouts found by the algorithm closely resembled the canonical layouts. We trained a monkey in this paradigm and tested the algorithm with experimental neural data to confirm some of the results found in simulation. In all, the algorithm can serve not only to create new target layouts that outperform canonical layouts, but it can also confirm or help select among multiple canonical layouts. The optimal target placement algorithm developed here is the first algorithm of its kind, and it should both improve decode accuracy and help automate target placement for neural prostheses. PMID:18829845

Improved spatial coverage for brain 3D PRESS MRSI by automatic placement of outer-volume suppression saturation bands.

PubMed

Ozhinsky, Eugene; Vigneron, Daniel B; Nelson, Sarah J

2011-04-01

To develop a technique for optimizing coverage of brain 3D (1) H magnetic resonance spectroscopic imaging (MRSI) by automatic placement of outer-volume suppression (OVS) saturation bands (sat bands) and to compare the performance for point-resolved spectroscopic sequence (PRESS) MRSI protocols with manual and automatic placement of sat bands. The automated OVS procedure includes the acquisition of anatomic images from the head, obtaining brain and lipid tissue maps, calculating optimal sat band placement, and then using those optimized parameters during the MRSI acquisition. The data were analyzed to quantify brain coverage volume and data quality. 3D PRESS MRSI data were acquired from three healthy volunteers and 29 patients using protocols that included either manual or automatic sat band placement. On average, the automatic sat band placement allowed the acquisition of PRESS MRSI data from 2.7 times larger brain volumes than the conventional method while maintaining data quality. The technique developed helps solve two of the most significant problems with brain PRESS MRSI acquisitions: limited brain coverage and difficulty in prescription. This new method will facilitate routine clinical brain 3D MRSI exams and will be important for performing serial evaluation of response to therapy in patients with brain tumors and other neurological diseases. Copyright © 2011 Wiley-Liss, Inc.

Optimization of Therapeutic Strategies for Organophosphate Poisoning

DTIC Science & Technology

2008-03-01

chemical (Szinicz, 2005:173). Researchers later created various forms of the organophosphate and applied the chemicals as insecticides (Szinicz, 2005:173...of organophosphorus insecticides and nerve agents (Cannard, 2006:87). Organophosphates poison an estimated 100,000 people each year throughout the...quantifiable result in order to facilitate comparison among different therapeutic strategies. Justification and Applicability Organophosphorus insecticides are

Optimal placement and sizing of wind / solar based DG sources in distribution system

NASA Astrophysics Data System (ADS)

Guan, Wanlin; Guo, Niao; Yu, Chunlai; Chen, Xiaoguang; Yu, Haiyang; Liu, Zhipeng; Cui, Jiapeng

2017-06-01

Proper placement and sizing of Distributed Generation (DG) in distribution system can obtain maximum potential benefits. This paper proposes quantum particle swarm algorithm (QPSO) based wind turbine generation unit (WTGU) and photovoltaic (PV) array placement and sizing approach for real power loss reduction and voltage stability improvement of distribution system. Performance modeling of wind and solar generation system are described and classified into PQ\\PQ (V)\\PI type models in power flow. Considering the WTGU and PV based DGs in distribution system is geographical restrictive, the optimal area and DG capacity limits of each bus in the setting area need to be set before optimization, the area optimization method is proposed . The method has been tested on IEEE 33-bus radial distribution systems to demonstrate the performance and effectiveness of the proposed method.

Wind Farm Turbine Type and Placement Optimization

NASA Astrophysics Data System (ADS)

Graf, Peter; Dykes, Katherine; Scott, George; Fields, Jason; Lunacek, Monte; Quick, Julian; Rethore, Pierre-Elouan

2016-09-01

The layout of turbines in a wind farm is already a challenging nonlinear, nonconvex, nonlinearly constrained continuous global optimization problem. Here we begin to address the next generation of wind farm optimization problems by adding the complexity that there is more than one turbine type to choose from. The optimization becomes a nonlinear constrained mixed integer problem, which is a very difficult class of problems to solve. This document briefly summarizes the algorithm and code we have developed, the code validation steps we have performed, and the initial results for multi-turbine type and placement optimization (TTP_OPT) we have run.

Wind farm turbine type and placement optimization

DOE PAGES

Graf, Peter; Dykes, Katherine; Scott, George; ...

2016-10-03

The layout of turbines in a wind farm is already a challenging nonlinear, nonconvex, nonlinearly constrained continuous global optimization problem. Here we begin to address the next generation of wind farm optimization problems by adding the complexity that there is more than one turbine type to choose from. The optimization becomes a nonlinear constrained mixed integer problem, which is a very difficult class of problems to solve. Furthermore, this document briefly summarizes the algorithm and code we have developed, the code validation steps we have performed, and the initial results for multi-turbine type and placement optimization (TTP_OPT) we have run.

Medical and psychological problems faced by young Australian gap year travellers.

PubMed

Furuya-Kanamori, Luis; Mills, Deborah; Sheridan, Sarah; Lau, Colleen

2017-09-01

Gap year travellers can potentially be exposed to many infectious diseases and other travel-related health problems including injuries and psychological problems. Currently, there is little information on health and wellbeing of this particular group of travellers. Participants were recruited from an organization that specialized in organising international gap year placements. Gap year travellers were asked to complete a pre-departure survey on demographics, placement destination and duration, previous travel experience, hobbies, risk taking behaviour, anticipated problems during the placement, and pre-travel preparations. After the placement, participants were asked to complete a post-trip survey on their experiences, problems, health issues, and medical treatment required. The 88 and 34 gap year travellers aged 17-23 years completed pre- and post-placement surveys respectively. The duration of placements ranged from 3 to 12 months. Psychological stressors were frequently reported [ n = 26 (76.5%) felt home sick; n = 18 (52.9%) experienced culture shock; n = 17 (50.0%) had difficulty communicating with the locals]. The majority of participants (91.2%) tried to work out a solution for the stressor on their own. Twenty-eight (82.4%) participants reported medical problems during their placement; the most common problems were sunburn ( n = 19; 55.9%), respiratory infections ( n = 15; 44.1%), weight change ( n = 14; 41.2%), and diarrhoea/food poisoning ( n = 13; 38.2%). Three participants (3.4%) were admitted to hospital; for a muscle injury, head injury and skin infection after getting a tribal tattoo. Psychological stressors were common, but most did not seek help. Some medical problems encountered during their placement may have been preventable with improved pre-departure preparation. Gap year, pre-departure, preparation. © International Society of Travel Medicine, 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Attitudes about carbon monoxide safety in the United States: results from the 2005 and 2006 HealthStyles Survey.

PubMed

King, Michael E; Damon, Scott A

2011-01-01

We sought to identify attitudes and behaviors related to carbon monoxide (CO) safety that can be targeted with public health prevention strategies in the U.S. The Centers for Disease Control and Prevention added questions about (1) proper placement of gas-powered generators, (2) maintenance of fuel-burning appliances, and (3) use of CO detectors to the 2005 and 2006 HealthStyles national health marketing surveys. In 2005, 63.3% of HealthStyles respondents agreed with or were uncertain about the incorrect statement, "It is safe to run a generator in a garage as long as the door is open," while 43.1% agreed with or were uncertain about the incorrect statement, "It is safe to run a generator in the basement." Most of the 2006 respondents (63.5%) agreed that it is important to have their furnace inspected annually. However, fewer than half of the 2006 respondents (42.0%)-most of whom were homeowners-reported owning a CO detector. A large proportion of adults in the U.S. reported attitudes and behaviors that may place them at increased risk for unintentional, non-fire-related CO poisoning, suggesting that current safety messages may not be reaching much of the public. Prevention messages should continue to promote proper generator placement, maintenance of fuel-burning appliances, and use of CO detectors. Development of a comprehensive national strategy for CO surveillance and communication may help identify populations at increased risk and prevent future poisonings.

Unsteady flow sensing and optimal sensor placement using machine learning

NASA Astrophysics Data System (ADS)

Semaan, Richard

2016-11-01

Machine learning is used to estimate the flow state and to determine the optimal sensor placement over a two-dimensional (2D) airfoil equipped with a Coanda actuator. The analysis is based on flow field data obtained from 2D unsteady Reynolds averaged Navier-Stokes (uRANS) simulations with different jet blowing intensities and actuation frequencies, characterizing different flow separation states. This study shows how the "random forests" algorithm is utilized beyond its typical usage in fluid mechanics estimating the flow state to determine the optimal sensor placement. The results are compared against the current de-facto standard of maximum modal amplitude location and against a brute force approach that scans all possible sensor combinations. The results show that it is possible to simultaneously infer the state of flow and to determine the optimal sensor location without the need to perform proper orthogonal decomposition. Collaborative Research Center (CRC) 880, DFG.

Scalable Heuristics for Planning, Placement and Sizing of Flexible AC Transmission System Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frolov, Vladmir; Backhaus, Scott N.; Chertkov, Michael

Aiming to relieve transmission grid congestion and improve or extend feasibility domain of the operations, we build optimization heuristics, generalizing standard AC Optimal Power Flow (OPF), for placement and sizing of Flexible Alternating Current Transmission System (FACTS) devices of the Series Compensation (SC) and Static VAR Compensation (SVC) type. One use of these devices is in resolving the case when the AC OPF solution does not exist because of congestion. Another application is developing a long-term investment strategy for placement and sizing of the SC and SVC devices to reduce operational cost and improve power system operation. SC and SVCmore » devices are represented by modification of the transmission line inductances and reactive power nodal corrections respectively. We find one placement and sizing of FACTs devices for multiple scenarios and optimal settings for each scenario simultaneously. Our solution of the nonlinear and nonconvex generalized AC-OPF consists of building a convergent sequence of convex optimizations containing only linear constraints and shows good computational scaling to larger systems. The approach is illustrated on single- and multi-scenario examples of the Matpower case-30 model.« less

Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect

PubMed Central

Cao, Hongrui; Niu, Linkai; He, Zhengjia

2012-01-01

Bearing defects are one of the most important mechanical sources for vibration and noise generation in machine tool spindles. In this study, an integrated finite element (FE) model is proposed to predict the vibration responses of a spindle bearing system with localized bearing defects and then the sensor placement for better detection of bearing faults is optimized. A nonlinear bearing model is developed based on Jones' bearing theory, while the drawbar, shaft and housing are modeled as Timoshenko's beam. The bearing model is then integrated into the FE model of drawbar/shaft/housing by assembling equations of motion. The Newmark time integration method is used to solve the vibration responses numerically. The FE model of the spindle-bearing system was verified by conducting dynamic tests. Then, the localized bearing defects were modeled and vibration responses generated by the outer ring defect were simulated as an illustration. The optimization scheme of the sensor placement was carried out on the test spindle. The results proved that, the optimal sensor placement depends on the vibration modes under different boundary conditions and the transfer path between the excitation and the response. PMID:23012514

Genetic evolutionary taboo search for optimal marker placement in infrared patient setup

NASA Astrophysics Data System (ADS)

Riboldi, M.; Baroni, G.; Spadea, M. F.; Tagaste, B.; Garibaldi, C.; Cambria, R.; Orecchia, R.; Pedotti, A.

2007-09-01

In infrared patient setup adequate selection of the external fiducial configuration is required for compensating inner target displacements (target registration error, TRE). Genetic algorithms (GA) and taboo search (TS) were applied in a newly designed approach to optimal marker placement: the genetic evolutionary taboo search (GETS) algorithm. In the GETS paradigm, multiple solutions are simultaneously tested in a stochastic evolutionary scheme, where taboo-based decision making and adaptive memory guide the optimization process. The GETS algorithm was tested on a group of ten prostate patients, to be compared to standard optimization and to randomly selected configurations. The changes in the optimal marker configuration, when TRE is minimized for OARs, were specifically examined. Optimal GETS configurations ensured a 26.5% mean decrease in the TRE value, versus 19.4% for conventional quasi-Newton optimization. Common features in GETS marker configurations were highlighted in the dataset of ten patients, even when multiple runs of the stochastic algorithm were performed. Including OARs in TRE minimization did not considerably affect the spatial distribution of GETS marker configurations. In conclusion, the GETS algorithm proved to be highly effective in solving the optimal marker placement problem. Further work is needed to embed site-specific deformation models in the optimization process.

Generation and Evaluation of PEGylated Recombinant Human Acetylcholinesterase as an Optimal OP-Bioscavenger

DTIC Science & Technology

2009-04-27

intramuscularly and then monitored at various time points for body weight and temperature, blood glucose levels, blood biochemistry and hematology. No...means for therapeutic treatment of OP compound poisoning without exerting any deleterious effect on the treated subjects...R.P., Castro, C.A., Finger, A.V. and Lenz, D.E. (1991). Protection by butyrylcholinesterase against organophosphorus poisoning in nonhuman primates

Open-label randomized clinical trial of atropine bolus injection versus incremental boluses plus infusion for organophosphate poisoning in Bangladesh.

PubMed

Abedin, Mohammed Joynal; Sayeed, Abdullah Abu; Basher, Ariful; Maude, Richard J; Hoque, Gofranul; Faiz, M A

2012-06-01

Severe organophosphate compound (OPC) poisoning is an important clinical problem in many countries of the world. Unfortunately, little clinical research has been performed and little evidence exists with which to determine the best therapy. A study was therefore undertaken to determine the optimal dosing regimen for atropine in the treatment of OPC poisoning. An open-label randomized clinical trial was conducted in Chittagong Medical College Hospital, Chittagong, Bangladesh, on 156 hospitalized individuals with OPC poisoning from June to September 2006. The aim was to compare the efficacy and safety of conventional bolus doses with individualized incremental doses of atropine for atropinization followed by continuous atropine infusion for management of OPC poisoning. Inclusion criteria were patients with a clear history of OPC poisoning with clear clinical signs of toxicity, i.e. features of cholinergic crisis. The patients were observed for at least 96 h. Immediate outcome and complications were recorded. Out of 156 patients, 81 patients received conventional bolus dose atropine (group A) and 75 patients received rapidly incremental doses of atropine followed by infusion (group B). The mortality in group 'A' was 22.5% (18/80) and in group 'B' 8% (6/75) (p < 0.05). The mean duration of atropinization in group 'A' was 151.74 min compared to 23.90 min for group 'B' (p < 0.001). More patients in group A experienced atropine toxicity than in group 'B' (28.4% versus 12.0%, p < 0.05); intermediate syndrome was more common in group 'A' than in group 'B' (13.6% versus 4%, p < 0.05), and respiratory support was required more often for patients in group 'A' than in group 'B' (24.7% versus 8%, p < 0.05). Rapid incremental dose atropinization followed by atropine infusion reduces mortality and morbidity from OPC poisoning and shortens the length of hospital stay and recovery. Incremental atropine and infusion should become the treatment of choice for OPC poisoning. Given the paucity of existing evidence, further clinical studies should be performed to determine the optimal dosing regimen of atropine that most rapidly and safely achieves atropinization in these patients.

Impacts of Stress, Self-Efficacy, and Optimism on Suicide Ideation among Rehabilitation Patients with Acute Pesticide Poisoning

PubMed Central

Feng, Jun; Li, Shusheng; Chen, Huawen

2015-01-01

Background The high incidence of pesticide ingestion as a means to commit suicide is a critical public health problem. An important predictor of suicidal behavior is suicide ideation, which is related to stress. However, studies on how to defend against stress-induced suicidal thoughts are limited. Objective This study explores the impact of stress on suicidal ideation by investigating the mediating effect of self-efficacy and dispositional optimism. Methods Direct and indirect (via self-efficacy and dispositional optimism) effects of stress on suicidal ideation were investigated among 296 patients with acute pesticide poisoning from four general hospitals. For this purpose, structural equation modeling (SEM) and bootstrap method were used. Results Results obtained using SEM and bootstrap method show that stress has a direct effect on suicide ideation. Furthermore, self-efficacy and dispositional optimism partially weakened the relationship between stress and suicidal ideation. Conclusion The final model shows a significant relationship between stress and suicidal ideation through self-efficacy or dispositional optimism. The findings extended prior studies and provide enlightenment on how self-efficacy and optimism prevents stress-induced suicidal thoughts. PMID:25679994

Impacts of stress, self-efficacy, and optimism on suicide ideation among rehabilitation patients with acute pesticide poisoning.

PubMed

Feng, Jun; Li, Shusheng; Chen, Huawen

2015-01-01

The high incidence of pesticide ingestion as a means to commit suicide is a critical public health problem. An important predictor of suicidal behavior is suicide ideation, which is related to stress. However, studies on how to defend against stress-induced suicidal thoughts are limited. This study explores the impact of stress on suicidal ideation by investigating the mediating effect of self-efficacy and dispositional optimism. Direct and indirect (via self-efficacy and dispositional optimism) effects of stress on suicidal ideation were investigated among 296 patients with acute pesticide poisoning from four general hospitals. For this purpose, structural equation modeling (SEM) and bootstrap method were used. Results obtained using SEM and bootstrap method show that stress has a direct effect on suicide ideation. Furthermore, self-efficacy and dispositional optimism partially weakened the relationship between stress and suicidal ideation. The final model shows a significant relationship between stress and suicidal ideation through self-efficacy or dispositional optimism. The findings extended prior studies and provide enlightenment on how self-efficacy and optimism prevents stress-induced suicidal thoughts.

The effect of code expanding optimizations on instruction cache design

NASA Technical Reports Server (NTRS)

Chen, William Y.; Chang, Pohua P.; Conte, Thomas M.; Hwu, Wen-Mei W.

1991-01-01

It is shown that code expanding optimizations have strong and non-intuitive implications on instruction cache design. Three types of code expanding optimizations are studied: instruction placement, function inline expansion, and superscalar optimizations. Overall, instruction placement reduces the miss ratio of small caches. Function inline expansion improves the performance for small cache sizes, but degrades the performance of medium caches. Superscalar optimizations increases the cache size required for a given miss ratio. On the other hand, they also increase the sequentiality of instruction access so that a simple load-forward scheme effectively cancels the negative effects. Overall, it is shown that with load forwarding, the three types of code expanding optimizations jointly improve the performance of small caches and have little effect on large caches.

Tetramethylenedisulfotetramine: pest control gone awry.

PubMed

Shakarjian, Michael P; Laukova, Marcela; Velíšková, Jana; Stanton, Patric K; Heck, Diane E; Velíšek, Libor

2016-08-01

Incidences of pesticide poisonings are a significant cause of morbidity and mortality worldwide. The seizure-inducing rodenticide tetramethylenedisulfotetramine is one of the most toxic of these agents. Although banned, it has been responsible for thousands of accidental, intentional, and mass poisonings in mainland China and elsewhere. An optimal regimen for treatment of poisoning has not been established. Its facile synthesis from easily obtained starting materials, extreme potency, and lack of odor, color, or taste make it a potential chemical threat agent. This review describes the toxicologic properties of this agent, more recent advances in our understanding of its properties, and recommendations for future research. © 2016 New York Academy of Sciences.

Optimized scalar promotion with load and splat SIMD instructions

DOEpatents

Eichenberger, Alexander E; Gschwind, Michael K; Gunnels, John A

2013-10-29

Mechanisms for optimizing scalar code executed on a single instruction multiple data (SIMD) engine are provided. Placement of vector operation-splat operations may be determined based on an identification of scalar and SIMD operations in an original code representation. The original code representation may be modified to insert the vector operation-splat operations based on the determined placement of vector operation-splat operations to generate a first modified code representation. Placement of separate splat operations may be determined based on identification of scalar and SIMD operations in the first modified code representation. The first modified code representation may be modified to insert or delete separate splat operations based on the determined placement of the separate splat operations to generate a second modified code representation. SIMD code may be output based on the second modified code representation for execution by the SIMD engine.

Optimized scalar promotion with load and splat SIMD instructions

DOEpatents

Eichenberger, Alexandre E [Chappaqua, NY; Gschwind, Michael K [Chappaqua, NY; Gunnels, John A [Yorktown Heights, NY

2012-08-28

Mechanisms for optimizing scalar code executed on a single instruction multiple data (SIMD) engine are provided. Placement of vector operation-splat operations may be determined based on an identification of scalar and SIMD operations in an original code representation. The original code representation may be modified to insert the vector operation-splat operations based on the determined placement of vector operation-splat operations to generate a first modified code representation. Placement of separate splat operations may be determined based on identification of scalar and SIMD operations in the first modified code representation. The first modified code representation may be modified to insert or delete separate splat operations based on the determined placement of the separate splat operations to generate a second modified code representation. SIMD code may be output based on the second modified code representation for execution by the SIMD engine.

Patient-specific port placement for laparoscopic surgery using atlas-based registration

NASA Astrophysics Data System (ADS)

Enquobahrie, Andinet; Shivaprabhu, Vikas; Aylward, Stephen; Finet, Julien; Cleary, Kevin; Alterovitz, Ron

2013-03-01

Laparoscopic surgery is a minimally invasive surgical approach, in which abdominal surgical procedures are performed through trocars via small incisions. Patients benefit by reduced postoperative pain, shortened hospital stays, improved cosmetic results, and faster recovery times. Optimal port placement can improve surgeon dexterity and avoid the need to move the trocars, which would cause unnecessary trauma to the patient. We are building an intuitive open source visualization system to help surgeons identify ports. Our methodology is based on an intuitive port placement visualization module and atlas-based registration algorithm to transfer port locations to individual patients. The methodology follows three steps:1) Use a port placement visualization module to manually place ports in an abdominal organ atlas. This step generates port-augmented abdominal atlas. This is done only once for a given patient population. 2) Register the atlas data with the patient CT data, to transfer the prescribed ports to the individual patient 3) Review and adjust the transferred port locations using the port placement visualization module. Tool maneuverability and target reachability can be tested using the visualization system. Our methodology would decrease the amount of physician input necessary to optimize port placement for each patient case. In a follow up work, we plan to use the transferred ports as starting point for further optimization of the port locations by formulating a cost function that will take into account factors such as tool dexterity and likelihood of collision between instruments.

Method for measuring target rotation angle by theodolites

NASA Astrophysics Data System (ADS)

Sun, Zelin; Wang, Zhao; Zhai, Huanchun; Yang, Xiaoxu

2013-05-01

To overcome the disadvantage of the current measurement methods using theodolites in an environment with shock and long working hours and so on, this paper proposes a new method for 3D coordinate measurement that is based on an immovable measuring coordinate system. According to the measuring principle, the mathematics model is established and the measurement uncertainty is analysed. The measurement uncertainty of the new method is a function of the theodolite observation angles and their uncertainty, and can be reduced by optimizing the theodolites’ placement. Compared to other methods, this method allows the theodolite positions to be changed in the measuring process, and mutual collimation between the theodolites is not required. The experimental results show that the measurement model and the optimal placement principle are correct, and the measurement error is less than 0.01° after optimizing the theodolites’ placement.

Optimal placement of water-lubricated rubber bearings for vibration reduction of flexible multistage rotor systems

NASA Astrophysics Data System (ADS)

Liu, Shibing; Yang, Bingen

2017-10-01

Flexible multistage rotor systems with water-lubricated rubber bearings (WLRBs) have a variety of engineering applications. Filling a technical gap in the literature, this effort proposes a method of optimal bearing placement that minimizes the vibration amplitude of a WLRB-supported flexible rotor system with a minimum number of bearings. In the development, a new model of WLRBs and a distributed transfer function formulation are used to define a mixed continuous-and-discrete optimization problem. To deal with the case of uncertain number of WLRBs in rotor design, a virtual bearing method is devised. Solution of the optimization problem by a real-coded genetic algorithm yields the locations and lengths of water-lubricated rubber bearings, by which the prescribed operational requirements for the rotor system are satisfied. The proposed method is applicable either to preliminary design of a new rotor system with the number of bearings unforeknown or to redesign of an existing rotor system with a given number of bearings. Numerical examples show that the proposed optimal bearing placement is efficient, accurate and versatile in different design cases.

Minimal invasive epicardial lead implantation: optimizing cardiac resynchronization with a new mapping device for epicardial lead placement.

PubMed

Maessen, J G; Phelps, B; Dekker, A L A J; Dijkman, B

2004-05-01

To optimize resynchronization in biventricular pacing with epicardial leads, mapping to determine the best pacing site, is a prerequisite. A port access surgical mapping technique was developed that allowed multiple pace site selection and reproducible lead evaluation and implantation. Pressure-volume loops analysis was used for real time guidance in targeting epicardial lead placement. Even the smallest changes in lead position revealed significantly different functional results. Optimizing the pacing site with this technique allowed functional improvement up to 40% versus random pace site selection.

Optimal placement of excitations and sensors for verification of large dynamical systems

NASA Technical Reports Server (NTRS)

Salama, M.; Rose, T.; Garba, J.

1987-01-01

The computationally difficult problem of the optimal placement of excitations and sensors to maximize the observed measurements is studied within the framework of combinatorial optimization, and is solved numerically using a variation of the simulated annealing heuristic algorithm. Results of numerical experiments including a square plate and a 960 degrees-of-freedom Control of Flexible Structure (COFS) truss structure, are presented. Though the algorithm produces suboptimal solutions, its generality and simplicity allow the treatment of complex dynamical systems which would otherwise be difficult to handle.

The need for translational research on antidotes for pesticide poisoning

PubMed Central

Buckley, Nick A; Eddleston, Michael; Dawson, Andrew H

2006-01-01

Summary Pesticide poisoning kills hundreds of thousands of people in the Asia Pacific region each year. The majority are from deliberate self-poisoning with organophosphorus pesticides (OP), aluminium phosphide and paraquat. The current response from a public health, medical and research perspective is inadequate. There are few proven or effective treatments; in addition, very little clinical research has been done to transfer antidotes shown to work in animal studies into clinical practice. The human toxicity of pesticides is poorly studied and better information might inform a more sustained and appropriate regulatory response. Further understanding may also lead to improvement in diagnosis and treatment. The few effective treatments are not being recommended or delivered in an optimal and timely fashion to poisoned patients. A regional approach to facilitate appropriate pricing, packaging and delivery of antidotes is required. PMID:16405459

Simulation based optimization on automated fibre placement process

NASA Astrophysics Data System (ADS)

Lei, Shi

2018-02-01

In this paper, a software simulation (Autodesk TruPlan & TruFiber) based method is proposed to optimize the automate fibre placement (AFP) process. Different types of manufacturability analysis are introduced to predict potential defects. Advanced fibre path generation algorithms are compared with respect to geometrically different parts. Major manufacturing data have been taken into consideration prior to the tool paths generation to achieve high success rate of manufacturing.

The Effect of Parathion on Red Blood Cell Acetylcholinesterase in the Wistar Rat.

PubMed

Bunya, Naofumi; Sawamoto, Keigo; Benoit, Hanif; Bird, Steven B

2016-01-01

Organophosphorus (OP) pesticide poisoning is a significant problem worldwide. Research into new antidotes for these acetylcholinesterase inhibitors, and even optimal doses for current therapies, is hindered by a lack of standardized animal models. In this study, we sought to characterize the effects of the OP pesticide parathion on acetylcholinesterase in a Wistar rat model that included comprehensive medical care. Methods. Male Wistar rats were intubated and mechanically ventilated and then poisoned with between 20 mg/kg and 60 mg/kg of intravenous parathion. Upon developing signs of poisoning, the rats were treated with standard critical care, including atropine, pralidoxime chloride, and midazolam, for up to 48 hours. Acetylcholinesterase activity was determined serially for up to 8 days after poisoning. Results. At all doses of parathion, maximal depression of acetylcholinesterase occurred at 3 hours after poisoning. Acetylcholinesterase recovered to nearly 50% of baseline activity by day 4 in the 20 mg/kg cohort and by day 5 in the 40 and 60 mg/kg cohorts. At day 8, most rats' acetylcholinesterase had recovered to roughly 70% of baseline. These data should be useful in developing rodent models of acute OP pesticide poisoning.

The Effect of Parathion on Red Blood Cell Acetylcholinesterase in the Wistar Rat

PubMed Central

Bunya, Naofumi; Sawamoto, Keigo; Benoit, Hanif

2016-01-01

Organophosphorus (OP) pesticide poisoning is a significant problem worldwide. Research into new antidotes for these acetylcholinesterase inhibitors, and even optimal doses for current therapies, is hindered by a lack of standardized animal models. In this study, we sought to characterize the effects of the OP pesticide parathion on acetylcholinesterase in a Wistar rat model that included comprehensive medical care. Methods. Male Wistar rats were intubated and mechanically ventilated and then poisoned with between 20 mg/kg and 60 mg/kg of intravenous parathion. Upon developing signs of poisoning, the rats were treated with standard critical care, including atropine, pralidoxime chloride, and midazolam, for up to 48 hours. Acetylcholinesterase activity was determined serially for up to 8 days after poisoning. Results. At all doses of parathion, maximal depression of acetylcholinesterase occurred at 3 hours after poisoning. Acetylcholinesterase recovered to nearly 50% of baseline activity by day 4 in the 20 mg/kg cohort and by day 5 in the 40 and 60 mg/kg cohorts. At day 8, most rats' acetylcholinesterase had recovered to roughly 70% of baseline. These data should be useful in developing rodent models of acute OP pesticide poisoning. PMID:27418928

Heuristic rules embedded genetic algorithm for in-core fuel management optimization

NASA Astrophysics Data System (ADS)

Alim, Fatih

The objective of this study was to develop a unique methodology and a practical tool for designing loading pattern (LP) and burnable poison (BP) pattern for a given Pressurized Water Reactor (PWR) core. Because of the large number of possible combinations for the fuel assembly (FA) loading in the core, the design of the core configuration is a complex optimization problem. It requires finding an optimal FA arrangement and BP placement in order to achieve maximum cycle length while satisfying the safety constraints. Genetic Algorithms (GA) have been already used to solve this problem for LP optimization for both PWR and Boiling Water Reactor (BWR). The GA, which is a stochastic method works with a group of solutions and uses random variables to make decisions. Based on the theories of evaluation, the GA involves natural selection and reproduction of the individuals in the population for the next generation. The GA works by creating an initial population, evaluating it, and then improving the population by using the evaluation operators. To solve this optimization problem, a LP optimization package, GARCO (Genetic Algorithm Reactor Code Optimization) code is developed in the framework of this thesis. This code is applicable for all types of PWR cores having different geometries and structures with an unlimited number of FA types in the inventory. To reach this goal, an innovative GA is developed by modifying the classical representation of the genotype. To obtain the best result in a shorter time, not only the representation is changed but also the algorithm is changed to use in-core fuel management heuristics rules. The improved GA code was tested to demonstrate and verify the advantages of the new enhancements. The developed methodology is explained in this thesis and preliminary results are shown for the VVER-1000 reactor hexagonal geometry core and the TMI-1 PWR. The improved GA code was tested to verify the advantages of new enhancements. The core physics code used for VVER in this research is Moby-Dick, which was developed to analyze the VVER by SKODA Inc. The SIMULATE-3 code, which is an advanced two-group nodal code, is used to analyze the TMI-1.

Tracking with a Cooperatively Controlled Swarm of GMTI Equipped UAVS

DTIC Science & Technology

2008-12-02

with Ground Optimal Placement of GMTI UAVs for ground target tracking Abhijit Sinha°, Thia. Kirubarajana and Yaakov Bar-Shalom6 " Electrical and...Storrs, CT 06269, USA Abstract—With the recent advent of moderate-cost unmanned (or uninhabited) aerial vehicles (UAV) and their success in...the sensor platforms are mobile one has to decide the optimal placement of sensors. With the recent advent of af- fordable unmanned aerial vehicles

Stochastic DG Placement for Conservation Voltage Reduction Based on Multiple Replications Procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Zhaoyu; Chen, Bokan; Wang, Jianhui

2015-06-01

Conservation voltage reduction (CVR) and distributed-generation (DG) integration are popular strategies implemented by utilities to improve energy efficiency. This paper investigates the interactions between CVR and DG placement to minimize load consumption in distribution networks, while keeping the lowest voltage level within the predefined range. The optimal placement of DG units is formulated as a stochastic optimization problem considering the uncertainty of DG outputs and load consumptions. A sample average approximation algorithm-based technique is developed to solve the formulated problem effectively. A multiple replications procedure is developed to test the stability of the solution and calculate the confidence interval ofmore » the gap between the candidate solution and optimal solution. The proposed method has been applied to the IEEE 37-bus distribution test system with different scenarios. The numerical results indicate that the implementations of CVR and DG, if combined, can achieve significant energy savings.« less

The path of placement of a removable partial denture: a microscope based approach to survey and design

PubMed Central

2015-01-01

This article reviews the topic of how to identify and develop a removable partial denture (RPD) path of placement, and provides a literature review of the concept of the RPD path of placement, also known as the path of insertion. An optimal RPD path of placement, guided by mutually parallel guide planes, ensures that the RPD flanges fit intimately over edentulous ridge structures and that the framework fits intimately with guide plane surfaces, which prevents food collecting empty spaces between the intaglio surface of the framework and intraoral surfaces, and ensures that RPD clasps engage adequate numbers of tooth undercuts to ensure RPD retention. The article covers topics such as the causes of obstructions to RPD intra-oral seating, the causes of food collecting empty spaces that may exist around an RPD, and how to identify if a guide plane is parallel with the projected RPD path of placement. The article presents a method of using a surgical operating microscope, or high magnification (6-8x or greater) binocular surgical loupes telescopes, combined with co-axial illumination, to identify a preliminary path of placement for an arch. This preliminary path of placement concept may help to guide a dentist or a dental laboratory technician when surveying a master cast of the arch to develop an RPD path of placement, or in verifying that intra-oral contouring has aligned teeth surfaces optimally with the RPD path of placement. In dentistry, a well-fitting RPD reduces long-term periodontal or structural damage to abutment teeth. PMID:25722842

Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Zhang, Xiaoqiang; Yu, Guangsen; Zeng, Shumao; Parbey, Joseph; Xiao, Shuhao; Li, Baihai; Li, Tingshuai; Andersson, Martin

2018-03-01

Chromium poisoning the La0.875Sr0.125MnO3 (LSM) cathode for solid oxide fuel cells is a critical issue that can strongly affect the stability. In this study, we evaluate the temperature distribution in a SOFC based on a 3D model and then combine conductivity test and material computation to reveal the effects of chromium in SUS430 stainless steels on LSM conductivities. The starch concentration in LSM pellets and the applied pressure on the contact with interconnect materials show close relationships with the chromium poisoning behavior. The density functional theory (DFT) computing results indicate that chromium atoms preferably adsorb on the MnO2-terminated and La (Sr)-O-terminated (001) surfaces. The resulting conclusions are expected to deeply understand mechanism of chromium deactivating conventional cathodes at some typical operational conditions, and offer crucial information to optimize the structure to avoid the poisoning effect.

Multi-type sensor placement and response reconstruction for building structures: Experimental investigations

NASA Astrophysics Data System (ADS)

Hu, Rong-Pan; Xu, You-Lin; Zhan, Sheng

2018-01-01

Estimation of lateral displacement and acceleration responses is essential to assess safety and serviceability of high-rise buildings under dynamic loadings including earthquake excitations. However, the measurement information from the limited number of sensors installed in a building structure is often insufficient for the complete structural performance assessment. An integrated multi-type sensor placement and response reconstruction method has thus been proposed by the authors to tackle this problem. To validate the feasibility and effectiveness of the proposed method, an experimental investigation using a cantilever beam with multi-type sensors is performed and reported in this paper. The experimental setup is first introduced. The finite element modelling and model updating of the cantilever beam are then performed. The optimal sensor placement for the best response reconstruction is determined by the proposed method based on the updated FE model of the beam. After the sensors are installed on the physical cantilever beam, a number of experiments are carried out. The responses at key locations are reconstructed and compared with the measured ones. The reconstructed responses achieve a good match with the measured ones, manifesting the feasibility and effectiveness of the proposed method. Besides, the proposed method is also examined for the cases of different excitations and unknown excitation, and the results prove the proposed method to be robust and effective. The superiority of the optimized sensor placement scheme is finally demonstrated through comparison with two other different sensor placement schemes: the accelerometer-only scheme and non-optimal sensor placement scheme. The proposed method can be applied to high-rise buildings for seismic performance assessment.

A global stochastic programming approach for the optimal placement of gas detectors with nonuniform unavailabilities

DOE PAGES

Liu, Jianfeng; Laird, Carl Damon

2017-09-22

Optimal design of a gas detection systems is challenging because of the numerous sources of uncertainty, including weather and environmental conditions, leak location and characteristics, and process conditions. Rigorous CFD simulations of dispersion scenarios combined with stochastic programming techniques have been successfully applied to the problem of optimal gas detector placement; however, rigorous treatment of sensor failure and nonuniform unavailability has received less attention. To improve reliability of the design, this paper proposes a problem formulation that explicitly considers nonuniform unavailabilities and all backup detection levels. The resulting sensor placement problem is a large-scale mixed-integer nonlinear programming (MINLP) problem thatmore » requires a tailored solution approach for efficient solution. We have developed a multitree method which depends on iteratively solving a sequence of upper-bounding master problems and lower-bounding subproblems. The tailored global solution strategy is tested on a real data problem and the encouraging numerical results indicate that our solution framework is promising in solving sensor placement problems. This study was selected for the special issue in JLPPI from the 2016 International Symposium of the MKO Process Safety Center.« less

A global stochastic programming approach for the optimal placement of gas detectors with nonuniform unavailabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jianfeng; Laird, Carl Damon

Optimal design of a gas detection systems is challenging because of the numerous sources of uncertainty, including weather and environmental conditions, leak location and characteristics, and process conditions. Rigorous CFD simulations of dispersion scenarios combined with stochastic programming techniques have been successfully applied to the problem of optimal gas detector placement; however, rigorous treatment of sensor failure and nonuniform unavailability has received less attention. To improve reliability of the design, this paper proposes a problem formulation that explicitly considers nonuniform unavailabilities and all backup detection levels. The resulting sensor placement problem is a large-scale mixed-integer nonlinear programming (MINLP) problem thatmore » requires a tailored solution approach for efficient solution. We have developed a multitree method which depends on iteratively solving a sequence of upper-bounding master problems and lower-bounding subproblems. The tailored global solution strategy is tested on a real data problem and the encouraging numerical results indicate that our solution framework is promising in solving sensor placement problems. This study was selected for the special issue in JLPPI from the 2016 International Symposium of the MKO Process Safety Center.« less

PI controller design of a wind turbine: evaluation of the pole-placement method and tuning using constrained optimization

NASA Astrophysics Data System (ADS)

Mirzaei, Mahmood; Tibaldi, Carlo; Hansen, Morten H.

2016-09-01

PI/PID controllers are the most common wind turbine controllers. Normally a first tuning is obtained using methods such as pole-placement or Ziegler-Nichols and then extensive aeroelastic simulations are used to obtain the best tuning in terms of regulation of the outputs and reduction of the loads. In the traditional tuning approaches, the properties of different open loop and closed loop transfer functions of the system are not normally considered. In this paper, an assessment of the pole-placement tuning method is presented based on robustness measures. Then a constrained optimization setup is suggested to automatically tune the wind turbine controller subject to robustness constraints. The properties of the system such as the maximum sensitivity and complementary sensitivity functions (Ms and Mt ), along with some of the responses of the system, are used to investigate the controller performance and formulate the optimization problem. The cost function is the integral absolute error (IAE) of the rotational speed from a disturbance modeled as a step in wind speed. Linearized model of the DTU 10-MW reference wind turbine is obtained using HAWCStab2. Thereafter, the model is reduced with model order reduction. The trade-off curves are given to assess the tunings of the poles- placement method and a constrained optimization problem is solved to find the best tuning.

AN EVALUATION AND COST-OPTIMIZATION TOOL FOR PLACEMENT OF BMPS

EPA Science Inventory

To assist stormwater management professionals in planning for best management practices (BMPs) implementation, the U.S. Environmental Protection Agency (USEPA) is developing a decision-support system for placement of BMPs at strategic locations in urban watersheds. This tool wil...

Multi level optimization of burnable poison utilization for advanced PWR fuel management

NASA Astrophysics Data System (ADS)

Yilmaz, Serkan

The objective of this study was to develop an unique methodology and a practical tool for designing burnable poison (BP) pattern for a given PWR core. Two techniques were studied in developing this tool. First, the deterministic technique called Modified Power Shape Forced Diffusion (MPSFD) method followed by a fine tuning algorithm, based on some heuristic rules, was developed to achieve this goal. Second, an efficient and a practical genetic algorithm (GA) tool was developed and applied successfully to Burnable Poisons (BPs) placement optimization problem for a reference Three Mile Island-1 (TMI-1) core. This thesis presents the step by step progress in developing such a tool. The developed deterministic method appeared to perform as expected. The GA technique produced excellent BP designs. It was discovered that the Beginning of Cycle (BOC) Kinf of a BP fuel assembly (FA) design is a good filter to eliminate invalid BP designs created during the optimization process. By eliminating all BP designs having BOC Kinf above a set limit, the computational time was greatly reduced since the evaluation process with reactor physics calculations for an invalid solution is canceled. Moreover, the GA was applied to develop the BP loading pattern to minimize the total Gadolinium (Gd) amount in the core together with the residual binding at End-of-Cycle (EOC) and to keep the maximum peak pin power during core depletion and Soluble boron concentration at BOC both less than their limit values. The number of UO2/Gd2O3 pins and Gd 2O3 concentrations for each fresh fuel location in the core are the decision variables and the total amount of the Gd in the core and maximum peak pin power during core depletion are in the fitness functions. The use of different fitness function definition and forcing the solution movement towards to desired region in the solution space accelerated the GA runs. Special emphasize is given to minimizing the residual binding to increase core lifetime as well as minimizing the total Gd amount in the core. The GA code developed many good solutions that satisfy all of the design constraints. For these solutions, the EOC soluble boron concentration changes from 68.9 to 97.2 ppm. It is important to note that the difference of 28.3 ppm between the best and the worst solution in the good solutions region represent the potential of 12.5 Effective-Full-Power-Day (EPFD) savings in cycle length. As a comparison, the best BP loading design has 97.2 ppm soluble boron concentration at EOC while the BP loading with available vendors' U/Gd FA designs has 94.4 ppm SOB at EOC. It was estimated that the difference of 2.8 ppm reflected the potential savings of 1.25 EFPD in cycle length. Moreover, the total Gd amount was reduced by 6.89% in mass that provided extra savings in fuel cost compared to the BP loading pattern with available vendor's U/Gd FA designs. (Abstract shortened by UMI.)

SUSTAIN -AN EVALUATION AND COST-OPTIMIZATION TOOL FOR PLACEMENT OF BMPS

EPA Science Inventory

Since 2003, the U.S. Environmental Protection Agency (USEPA) has been developing a decision support system for placement of best management practices (BMPs) to assist stormwater management professionals in planning for BMPs implementation at strategic locations in urban watershed...

Pharmacological treatment of cardiac glycoside poisoning.

PubMed

Roberts, Darren M; Gallapatthy, Gamini; Dunuwille, Asunga; Chan, Betty S

2016-03-01

Cardiac glycosides are an important cause of poisoning, reflecting their widespread clinical usage and presence in natural sources. Poisoning can manifest as varying degrees of toxicity. Predominant clinical features include gastrointestinal signs, bradycardia and heart block. Death occurs from ventricular fibrillation or tachycardia. A wide range of treatments have been used, the more common including activated charcoal, atropine, β-adrenoceptor agonists, temporary pacing, anti-digoxin Fab and magnesium, and more novel agents include fructose-1,6-diphosphate (clinical trial in progress) and anticalin. However, even in the case of those treatments that have been in use for decades, there is debate regarding their efficacy, the indications and dosage that optimizes outcomes. This contributes to variability in use across the world. Another factor influencing usage is access. Barriers to access include the requirement for transfer to a specialized centre (for example, to receive temporary pacing) or financial resources (for example, anti-digoxin Fab in resource poor countries). Recent data suggest that existing methods for calculating the dose of anti-digoxin Fab in digoxin poisoning overstate the dose required, and that its efficacy may be minimal in patients with chronic digoxin poisoning. Cheaper and effective medicines are required, in particular for the treatment of yellow oleander poisoning which is problematic in resource poor countries. © 2015 The British Pharmacological Society.

Antipsychotic drug poisoning monitoring of clozapine in urine by using coffee ring effect based surface-enhanced Raman spectroscopy.

PubMed

Zhu, Qingxia; Yu, Xiaoyan; Wu, Zebing; Lu, Feng; Yuan, Yongfang

2018-07-19

Antipsychotics are the drugs most often involved in drug poisoning cases, and therefore, therapeutic drug monitoring (TDM) is necessary for safe and effective medication administration of these drugs. In this study, a coffee ring effect-based surface-enhanced Raman spectroscopy (CRE-SERS) method was developed and successfully used to monitor antipsychotic poisoning by using urine samples for the first time. The established method exhibited excellent SERS performance since more hot spots were obtained in the "coffee ring". Using the optimized CRE-SERS method, the sensitivity was improved one order more than that of the conventional method with reasonable reproducibility. The antipsychotic drug clozapine (CLO) spiked into urine samples at 0.5-50 μg mL -1 was quantitatively detected, at concentrations above the thresholds for toxicity. The CRE-SERS method allowed CLO and its metabolites to be ultimately distinguished from real poisoning urine samples. The coffee-ring effect would provide more opportunities for practical applications of the SERS-based method. The frequent occurrence of drug poisoning may have created a new area for the application of the CRE-SERS method. It is anticipated that the developed method will also have great potential for other drug poisoning monitoring. Copyright © 2018 Elsevier B.V. All rights reserved.

Optimal actuator placement in adaptive precision trusses

NASA Technical Reports Server (NTRS)

Baycan, C. M.; Utku, S.; Das, S. K.; Wada, B. K.

1992-01-01

Actuator placement in adaptive truss structures is to cater to two needs: displacement control of precision points and preloading the elements to overcome joint slackness. Due to technological and financial considerations, the number of actuators available is much less than the degrees of freedom of precision points to be controlled and the degree of redundancy of the structure. An approach for optimal actuator location is outlined. Test cases to demonstrate the effectiveness of the scheme are applied to the Precision Segmented Reflector Truss.

Structural acoustic control of plates with variable boundary conditions: design methodology.

PubMed

Sprofera, Joseph D; Cabell, Randolph H; Gibbs, Gary P; Clark, Robert L

2007-07-01

A method for optimizing a structural acoustic control system subject to variations in plate boundary conditions is provided. The assumed modes method is used to build a plate model with varying levels of rotational boundary stiffness to simulate the dynamics of a plate with uncertain edge conditions. A transducer placement scoring process, involving Hankel singular values, is combined with a genetic optimization routine to find spatial locations robust to boundary condition variation. Predicted frequency response characteristics are examined, and theoretically optimized results are discussed in relation to the range of boundary conditions investigated. Modeled results indicate that it is possible to minimize the impact of uncertain boundary conditions in active structural acoustic control by optimizing the placement of transducers with respect to those uncertainties.

Optimal accelerometer placement on a robot arm for pose estimation

NASA Astrophysics Data System (ADS)

Wijayasinghe, Indika B.; Sanford, Joseph D.; Abubakar, Shamsudeen; Saadatzi, Mohammad Nasser; Das, Sumit K.; Popa, Dan O.

2017-05-01

The performance of robots to carry out tasks depends in part on the sensor information they can utilize. Usually, robots are fitted with angle joint encoders that are used to estimate the position and orientation (or the pose) of its end-effector. However, there are numerous situations, such as in legged locomotion, mobile manipulation, or prosthetics, where such joint sensors may not be present at every, or any joint. In this paper we study the use of inertial sensors, in particular accelerometers, placed on the robot that can be used to estimate the robot pose. Studying accelerometer placement on a robot involves many parameters that affect the performance of the intended positioning task. Parameters such as the number of accelerometers, their size, geometric placement and Signal-to-Noise Ratio (SNR) are included in our study of their effects for robot pose estimation. Due to the ubiquitous availability of inexpensive accelerometers, we investigated pose estimation gains resulting from using increasingly large numbers of sensors. Monte-Carlo simulations are performed with a two-link robot arm to obtain the expected value of an estimation error metric for different accelerometer configurations, which are then compared for optimization. Results show that, with a fixed SNR model, the pose estimation error decreases with increasing number of accelerometers, whereas for a SNR model that scales inversely to the accelerometer footprint, the pose estimation error increases with the number of accelerometers. It is also shown that the optimal placement of the accelerometers depends on the method used for pose estimation. The findings suggest that an integration-based method favors placement of accelerometers at the extremities of the robot links, whereas a kinematic-constraints-based method favors a more uniformly distributed placement along the robot links.

Transesophageal Echocardiography-Guided Epicardial Left Ventricular Lead Placement by Video-Assisted Thoracoscopic Surgery in Nonresponders to Biventricular Pacing and Previous Chest Surgery.

PubMed

Schroeder, Carsten; Chung, Jane M; Mackall, Judith A; Cakulev, Ivan T; Patel, Aaron; Patel, Sunny J; Hoit, Brian D; Sahadevan, Jayakumar

2018-06-14

The aim of the study was to study the feasibility, safety, and efficacy of transesophageal echocardiography-guided intraoperative left ventricular lead placement via a video-assisted thoracoscopic surgery approach in patients with failed conventional biventricular pacing. Twelve patients who could not have the left ventricular lead placed conventionally underwent epicardial left ventricular lead placement by video-assisted thoracoscopic surgery. Eight patients had previous chest surgery (66%). Operative positioning was a modified far lateral supine exposure with 30-degree bed tilt, allowing for groin and sternal access. To determine the optimal left ventricular location for lead placement, the left ventricular surface was divided arbitrarily into nine segments. These segments were transpericardially paced using a hand-held malleable pacing probe identifying the optimal site verified by transesophageal echocardiography. The pacing leads were screwed into position via a limited pericardiotomy. The video-assisted thoracoscopic surgery approach was successful in all patients. Biventricular pacing was achieved in all patients and all reported symptomatic benefit with reduction in New York Heart Association class from III to I-II (P = 0.016). Baseline ejection fraction was 23 ± 3%; within 1-year follow-up, the ejection fraction increased to 32 ± 10% (P = 0.05). The mean follow-up was 566 days. The median length of hospital stay was 7 days with chest tube removal between postoperative days 2 and 5. In patients who are nonresponders to conventional biventricular pacing, intraoperative left ventricular lead placement using anatomical and functional characteristics via a video-assisted thoracoscopic surgery approach is effective in improving heart failure symptoms. This optimized left ventricular lead placement is feasible and safe. Previous chest surgery is no longer an exclusion criterion for a video-assisted thoracoscopic surgery approach.

Design of optimally normal minimum gain controllers by continuation method

NASA Technical Reports Server (NTRS)

Lim, K. B.; Juang, J.-N.; Kim, Z. C.

1989-01-01

A measure of the departure from normality is investigated for system robustness. An attractive feature of the normality index is its simplicity for pole placement designs. To allow a tradeoff between system robustness and control effort, a cost function consisting of the sum of a norm of weighted gain matrix and a normality index is minimized. First- and second-order necessary conditions for the constrained optimization problem are derived and solved by a Newton-Raphson algorithm imbedded into a one-parameter family of neighboring zero problems. The method presented allows the direct computation of optimal gains in terms of robustness and control effort for pole placement problems.

Optimal power flow with optimal placement TCSC device on 500 kV Java-Bali electrical power system using genetic Algorithm-Taguchi method

NASA Astrophysics Data System (ADS)

Apribowo, Chico Hermanu Brillianto; Ibrahim, Muhammad Hamka; Wicaksono, F. X. Rian

2018-02-01

The growing burden of the load and the complexity of the power system has had an impact on the need for optimization of power system operation. Optimal power flow (OPF) with optimal location placement and rating of thyristor controlled series capacitor (TCSC) is an effective solution used to determine the economic cost of operating the plant and regulate the power flow in the power system. The purpose of this study is to minimize the total cost of generation by placing the location and the optimal rating of TCSC using genetic algorithm-design of experiment techniques (GA-DOE). Simulation on Java-Bali system 500 kV with the amount of TCSC used by 5 compensator, the proposed method can reduce the generation cost by 0.89% compared to OPF without using TCSC.

Genetic Algorithm Approaches for Actuator Placement

NASA Technical Reports Server (NTRS)

Crossley, William A.

2000-01-01

This research investigated genetic algorithm approaches for smart actuator placement to provide aircraft maneuverability without requiring hinged flaps or other control surfaces. The effort supported goals of the Multidisciplinary Design Optimization focus efforts in NASA's Aircraft au program. This work helped to properly identify various aspects of the genetic algorithm operators and parameters that allow for placement of discrete control actuators/effectors. An improved problem definition, including better definition of the objective function and constraints, resulted from this research effort. The work conducted for this research used a geometrically simple wing model; however, an increasing number of potential actuator placement locations were incorporated to illustrate the ability of the GA to determine promising actuator placement arrangements. This effort's major result is a useful genetic algorithm-based approach to assist in the discrete actuator/effector placement problem.

Optimal placement of fast cut back units based on the theory of cellular automata and agent

NASA Astrophysics Data System (ADS)

Yan, Jun; Yan, Feng

2017-06-01

The thermal power generation units with the function of fast cut back could serve power for auxiliary system and keep island operation after a major blackout, so they are excellent substitute for the traditional black-start power sources. Different placement schemes for FCB units have different influence on the subsequent restoration process. Considering the locality of the emergency dispatching rules, the unpredictability of specific dispatching instructions and unexpected situations like failure of transmission line energization, a novel deduction model for network reconfiguration based on the theory of cellular automata and agent is established. Several indexes are then defined for evaluating the placement schemes for FCB units. The attribute weights determination method based on subjective and objective integration and grey relational analysis are combinatorically used to determine the optimal placement scheme for FCB unit. The effectiveness of the proposed method is validated by the test results on the New England 10-unit 39-bus power system.

Spatio-Temporal Field Estimation Using Kriged Kalman Filter (KKF) with Sparsity-Enforcing Sensor Placement.

PubMed

Roy, Venkat; Simonetto, Andrea; Leus, Geert

2018-06-01

We propose a sensor placement method for spatio-temporal field estimation based on a kriged Kalman filter (KKF) using a network of static or mobile sensors. The developed framework dynamically designs the optimal constellation to place the sensors. We combine the estimation error (for the stationary as well as non-stationary component of the field) minimization problem with a sparsity-enforcing penalty to design the optimal sensor constellation in an economic manner. The developed sensor placement method can be directly used for a general class of covariance matrices (ill-conditioned or well-conditioned) modelling the spatial variability of the stationary component of the field, which acts as a correlated observation noise, while estimating the non-stationary component of the field. Finally, a KKF estimator is used to estimate the field using the measurements from the selected sensing locations. Numerical results are provided to exhibit the feasibility of the proposed dynamic sensor placement followed by the KKF estimation method.

Evaluation of poison information services provided by a new poison information center.

PubMed

Churi, Shobha; Abraham, Lovin; Ramesh, M; Narahari, M G

2013-01-01

The aim of this study is to assess the nature and quality of services provided by poison information center established at a tertiary-care teaching hospital, Mysore. This was a prospective observational study. The poison information center was officially established in September 2010 and began its functioning thereafter. The center is equipped with required resources and facility (e.g., text books, Poisindex, Drugdex, toll free telephone service, internet and online services) to provide poison information services. The poison information services provided by the center were recorded in documentation forms. The documentation form consists of numerous sections to collect information on: (a) Type of population (children, adult, elderly or pregnant) (b) poisoning agents (c) route of exposure (d) type of poisoning (intentional, accidental or environmental) (e) demographic details of patient (age, gender and bodyweight) (f) enquirer details (background, place of call and mode of request) (g) category and purpose of query and (h) details of provided service (information provided, mode of provision, time taken to provide information and references consulted). The nature and quality of poison information services provided was assessed using a quality assessment checklist developed in accordance with DSE/World Health Organization guidelines. Chi-Square test (χ(2)). A total of 419 queries were received by the center. A majority (n = 333; 79.5%) of the queries were asked by the doctors to provide optimal care (n = 400; 95.5%). Most of the queries were received during ward rounds (n = 201; 48.0%), followed by direct access (n = 147; 35.1%). The poison information services were predominantly provided through verbal communication (n = 352; 84.0%). Upon receipt of queries, the required service was provided immediately (n = 103; 24.6%) or within 10-20 min (n = 296; 70.6%). The queries were mainly related to intentional poisoning (n = 258; 64.5%), followed by accidental poisoning (n = 142; 35.5%). The most common poisoning agents were medicines (n = 124; 31.0%). The service provided was graded as "Excellent" for the majority of queries (n = 360; 86%; P < 0.001), followed by "Very Good" (n = 50; 12%) and "Good" (n = 9; 2%). The poison information center provided requested services in a skillful, efficient and evidence-based manner to meet the needs of the requestor. The enquiries and information provided is documented in a clear and systematic manner.

A Parallel Approach To Optimum Actuator Selection With a Genetic Algorithm

NASA Technical Reports Server (NTRS)

Rogers, James L.

2000-01-01

Recent discoveries in smart technologies have created a variety of aerodynamic actuators which have great potential to enable entirely new approaches to aerospace vehicle flight control. For a revolutionary concept such as a seamless aircraft with no moving control surfaces, there is a large set of candidate locations for placing actuators, resulting in a substantially larger number of combinations to examine in order to find an optimum placement satisfying the mission requirements. The placement of actuators on a wing determines the control effectiveness of the airplane. One approach to placement Maximizes the moments about the pitch, roll, and yaw axes, while minimizing the coupling. Genetic algorithms have been instrumental in achieving good solutions to discrete optimization problems, such as the actuator placement problem. As a proof of concept, a genetic has been developed to find the minimum number of actuators required to provide uncoupled pitch, roll, and yaw control for a simplified, untapered, unswept wing model. To find the optimum placement by searching all possible combinations would require 1,100 hours. Formulating the problem and as a multi-objective problem and modifying it to take advantage of the parallel processing capabilities of a multi-processor computer, reduces the optimization time to 22 hours.

An ACOR-Based Multi-Objective WSN Deployment Example for Lunar Surveying.

PubMed

López-Matencio, Pablo

2016-02-06

Wireless sensor networks (WSNs) can gather in situ real data measurements and work unattended for long periods, even in remote, rough places. A critical aspect of WSN design is node placement, as this determines sensing capacities, network connectivity, network lifetime and, in short, the whole operational capabilities of the WSN. This paper proposes and studies a new node placement algorithm that focus on these aspects. As a motivating example, we consider a network designed to describe the distribution of helium-3 (³He), a potential enabling element for fusion reactors, on the Moon. ³He is abundant on the Moon's surface, and knowledge of its distribution is essential for future harvesting purposes. Previous data are inconclusive, and there is general agreement that on-site measurements, obtained over a long time period, are necessary to better understand the mechanisms involved in the distribution of this element on the Moon. Although a mission of this type is extremely complex, it allows us to illustrate the main challenges involved in a multi-objective WSN placement problem, i.e., selection of optimal observation sites and maximization of the lifetime of the network. To tackle optimization, we use a recent adaptation of the ant colony optimization (ACOR) metaheuristic, extended to continuous domains. Solutions are provided in the form of a Pareto frontier that shows the optimal equilibria. Moreover, we compared our scheme with the four-directional placement (FDP) heuristic, which was outperformed in all cases.

Virtual sensors for active noise control in acoustic-structural coupled enclosures using structural sensing: part II--Optimization of structural sensor placement.

PubMed

Halim, Dunant; Cheng, Li; Su, Zhongqing

2011-04-01

The work proposed an optimization approach for structural sensor placement to improve the performance of vibro-acoustic virtual sensor for active noise control applications. The vibro-acoustic virtual sensor was designed to estimate the interior sound pressure of an acoustic-structural coupled enclosure using structural sensors. A spectral-spatial performance metric was proposed, which was used to quantify the averaged structural sensor output energy of a vibro-acoustic system excited by a spatially varying point source. It was shown that (i) the overall virtual sensing error energy was contributed additively by the modal virtual sensing error and the measurement noise energy; (ii) each of the modal virtual sensing error system was contributed by both the modal observability levels for the structural sensing and the target acoustic virtual sensing; and further (iii) the strength of each modal observability level was influenced by the modal coupling and resonance frequencies of the associated uncoupled structural/cavity modes. An optimal design of structural sensor placement was proposed to achieve sufficiently high modal observability levels for certain important panel- and cavity-controlled modes. Numerical analysis on a panel-cavity system demonstrated the importance of structural sensor placement on virtual sensing and active noise control performance, particularly for cavity-controlled modes.

Two-spoke placement optimization under explicit specific absorption rate and power constraints in parallel transmission at ultra-high field.

PubMed

Dupas, Laura; Massire, Aurélien; Amadon, Alexis; Vignaud, Alexandre; Boulant, Nicolas

2015-06-01

The spokes method combined with parallel transmission is a promising technique to mitigate the B1(+) inhomogeneity at ultra-high field in 2D imaging. To date however, the spokes placement optimization combined with the magnitude least squares pulse design has never been done in direct conjunction with the explicit Specific Absorption Rate (SAR) and hardware constraints. In this work, the joint optimization of 2-spoke trajectories and RF subpulse weights is performed under these constraints explicitly and in the small tip angle regime. The problem is first considerably simplified by making the observation that only the vector between the 2 spokes is relevant in the magnitude least squares cost-function, thereby reducing the size of the parameter space and allowing a more exhaustive search. The algorithm starts from a set of initial k-space candidates and performs in parallel for all of them optimizations of the RF subpulse weights and the k-space locations simultaneously, under explicit SAR and power constraints, using an active-set algorithm. The dimensionality of the spoke placement parameter space being low, the RF pulse performance is computed for every location in k-space to study the robustness of the proposed approach with respect to initialization, by looking at the probability to converge towards a possible global minimum. Moreover, the optimization of the spoke placement is repeated with an increased pulse bandwidth in order to investigate the impact of the constraints on the result. Bloch simulations and in vivo T2(∗)-weighted images acquired at 7 T validate the approach. The algorithm returns simulated normalized root mean square errors systematically smaller than 5% in 10 s. Copyright © 2015 Elsevier Inc. All rights reserved.

Optimal multi-type sensor placement for response and excitation reconstruction

NASA Astrophysics Data System (ADS)

Zhang, C. D.; Xu, Y. L.

2016-01-01

The need to perform dynamic response reconstruction always arises as the measurement of structural response is often limited to a few locations, especially for a large civil structure. Besides, it is usually very difficult, if not impossible, to measure external excitations under the operation condition of a structure. This study presents an algorithm for optimal placement of multi-type sensors, including strain gauges, displacement transducers and accelerometers, for the best reconstruction of responses of key structural components where there are no sensors installed and the best estimation of external excitations acting on the structure at the same time. The algorithm is developed in the framework of Kalman filter with unknown excitation, in which minimum-variance unbiased estimates of the generalized state of the structure and the external excitations are obtained by virtue of limited sensor measurements. The structural responses of key locations without sensors can then be reconstructed with the estimated generalized state and excitation. The asymptotic stability feature of the filter is utilized for optimal sensor placement. The number and spatial location of the multi-type sensors are determined by adding the optimal sensor which gains the maximal reduction of the estimation error of reconstructed responses. For the given mode number in response reconstruction and the given locations of external excitations, the optimal multi-sensor placement achieved by the proposed method is independent of the type and time evolution of external excitation. A simply-supported overhanging steel beam under multiple types of excitation is numerically studied to demonstrate the feasibility and superiority of the proposed method, and the experimental work is then carried out to testify the effectiveness of the proposed method.

Directed Diffusion Modelling for Tesso Nilo National Parks Case Study

NASA Astrophysics Data System (ADS)

Yasri, Indra; Safrianti, Ery

2018-01-01

— Directed Diffusion (DD has ability to achieve energy efficiency in Wireless Sensor Network (WSN). This paper proposes Directed Diffusion (DD) modelling for Tesso Nilo National Parks (TNNP) case study. There are 4 stages of scenarios involved in this modelling. It’s started by appointing of sampling area through GPS coordinate. The sampling area is determined by optimization processes from 500m x 500m up to 1000m x 1000m with 100m increment in between. The next stage is sensor node placement. Sensor node is distributed in sampling area with three different quantities i.e. 20 nodes, 30 nodes and 40 nodes. One of those quantities is choose as an optimized sensor node placement. The third stage is to implement all scenarios in stages 1 and stages 2 on DD modelling. In the last stage, the evaluation process to achieve most energy efficient in the combination of optimized sampling area and optimized sensor node placement on Direct Diffusion (DD) routing protocol. The result shows combination between sampling area 500m x 500m and 20 nodes able to achieve energy efficient to support a forest preventive fire system at Tesso Nilo National Parks.

Optimal Placement of Non-Intrusive Waste Heat Recovery Devices in Exhaust Ducts

DTIC Science & Technology

2015-06-01

Reynolds Number and Local Reynolds Number Depression Mixing .............................................................................40  3...57  viii 1.  Counterintuitive Findings Due to Local Reynolds Number Depression ... depression in the secondary recirculation zone enhances heat transfer, and device placement is the dominant factor for maximizing heat transfer in a

Masters of defence: biomechanics of stinging nettles

NASA Astrophysics Data System (ADS)

Jensen, Kaare H.; Knoblauch, Jan

2017-11-01

The techniques employed by plants and animals to defend themselves are very varied. Some involve extremely refined armaments. Stinging nettles employ hollow needle-like stinging hairs constructed from silica, the mineral from which we make glass, and they are filled with poison. The hairs are remarkably rigid and rarely break. Yet the tip is so sharp that the slightest touch cuts human skin, and so fragile that it breaks at that touch and releases poison into the wound. How the seemingly antagonist mechanical functions of rigidity and fragility are achieved, however, is unknown. We combine experiments on real and synthetic stingers to elucidate the poison injection mechanism. The design of plant stingers is compared to other natural systems and optimal stinging strategies are discussed. This work was supported by a research Grant (13166) from VILLUM FONDEN.

A Reduced Order Model of the Linearized Incompressible Navier-Strokes Equations for the Sensor/Actuator Placement Problem

NASA Technical Reports Server (NTRS)

Allan, Brian G.

2000-01-01

A reduced order modeling approach of the Navier-Stokes equations is presented for the design of a distributed optimal feedback kernel. This approach is based oil a Krylov subspace method where significant modes of the flow are captured in the model This model is then used in all optimal feedback control design where sensing and actuation is performed oil tile entire flow field. This control design approach yields all optimal feedback kernel which provides insight into the placement of sensors and actuators in the flow field. As all evaluation of this approach, a two-dimensional shear layer and driven cavity flow are investigated.

Rapid-releasing of HI-6 via brain-targeted mesoporous silica nanoparticles for nerve agent detoxification

NASA Astrophysics Data System (ADS)

Yang, Jun; Fan, Lixue; Wang, Feijian; Luo, Yuan; Sui, Xin; Li, Wanhua; Zhang, Xiaohong; Wang, Yongan

2016-05-01

The toxic nerve agent (NA) soman is the most toxic artificially synthesized compound that can rapidly penetrate into the brain and irreversibly inhibit acetylcholinesterase (AChE) activity, leading to immediate death. However, there are currently few brain-targeted nanodrugs that can treat acute chemical brain poisoning owing to the limited drug-releasing speed. The present study investigated the effectiveness of a nanodrug against NA toxicity that has high blood-brain barrier penetration and is capable of rapid drug release. Transferrin-modified mesoporous silica nanoparticles (TF-MSNs) were conjugated with the known AChE reactivator HI-6. This nanodrug rapidly penetrated the blood-brain barrier in zebrafish and mice and restored cerebral AChE activity via the released HI-6, preventing the brain damage caused by soman poisoning and increasing the survival rate in mice. Furthermore, there was no toxicity associated with the MSNs in mice or rats. These results demonstrate that TF-MSNs loaded with HI-6 represent the most effective antidote against NA poisoning by soman reported to date, and suggest that MSNs are a safe alternative to conventional drugs and an optimal nanocarrier for treating brain poisoning, which requires acute pulse cerebral administration.The toxic nerve agent (NA) soman is the most toxic artificially synthesized compound that can rapidly penetrate into the brain and irreversibly inhibit acetylcholinesterase (AChE) activity, leading to immediate death. However, there are currently few brain-targeted nanodrugs that can treat acute chemical brain poisoning owing to the limited drug-releasing speed. The present study investigated the effectiveness of a nanodrug against NA toxicity that has high blood-brain barrier penetration and is capable of rapid drug release. Transferrin-modified mesoporous silica nanoparticles (TF-MSNs) were conjugated with the known AChE reactivator HI-6. This nanodrug rapidly penetrated the blood-brain barrier in zebrafish and mice and restored cerebral AChE activity via the released HI-6, preventing the brain damage caused by soman poisoning and increasing the survival rate in mice. Furthermore, there was no toxicity associated with the MSNs in mice or rats. These results demonstrate that TF-MSNs loaded with HI-6 represent the most effective antidote against NA poisoning by soman reported to date, and suggest that MSNs are a safe alternative to conventional drugs and an optimal nanocarrier for treating brain poisoning, which requires acute pulse cerebral administration. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06658a

Extracorporeal treatment for theophylline poisoning: systematic review and recommendations from the EXTRIP workgroup.

PubMed

Ghannoum, Marc; Wiegand, Timothy J; Liu, Kathleen D; Calello, Diane P; Godin, Melanie; Lavergne, Valery; Gosselin, Sophie; Nolin, Thomas D; Hoffman, Robert S

2015-05-01

The Extracorporeal Treatments in Poisoning workgroup was created to provide evidence-based recommendations on the use of extracorporeal treatments (ECTRs) in poisoning. Here, the workgroup presents its systematic review and recommendations for theophylline. After a systematic review of the literature, a subgroup reviewed articles, extracted data, summarized findings, and proposed structured voting statements following a pre-determined format. A two-round modified Delphi method was chosen to reach a consensus on voting statements and the RAND/UCLA Appropriateness Method was used to quantify disagreement. Anonymous votes were compiled, returned, and discussed. A second vote determined the final recommendations. 141 articles were included: 6 in vitro studies, 4 animal studies, 101 case reports/case series, 7 descriptive cohorts, 4 observational studies, and 19 pharmacokinetic studies, yielding a low-to-very-low quality of evidence for all recommendations. Data on 143 patients were reviewed, including 10 deaths. The workgroup concluded that theophylline is dialyzable (level of evidence = A) and made the following recommendations: ECTR is recommended in severe theophylline poisoning (1C). Specific recommendations for ECTR include a theophylline concentration [theophylline] > 100 mg/L (555 μmol/L) in acute exposure (1C), the presence of seizures (1D), life-threatening dysrhythmias (1D) or shock (1D), a rising [theophylline] despite optimal therapy (1D), and clinical deterioration despite optimal care (1D). In chronic poisoning, ECTR is suggested if [theophylline] > 60 mg/L (333 μmol/L) (2D) or if the [theophylline] > 50 mg/L (278 μmol/L) and the patient is either less than 6 months of age or older than 60 years of age (2D). ECTR is also suggested if gastrointestinal decontamination cannot be administered (2D). ECTR should be continued until clinical improvement is apparent or the [theophylline] is < 15 mg/L (83 μmol/L) (1D). Following the cessation of ECTR, patients should be closely monitored. Intermittent hemodialysis is the preferred method of ECTR (1C). If intermittent hemodialysis is unavailable, hemoperfusion (1C) or continuous renal replacement therapies may be considered (3D). Exchange transfusion is an adequate alternative to hemodialysis in neonates (2D). Multi-dose activated charcoal should be continued during ECTR (1D). Theophylline poisoning is amenable to ECTRs. The workgroup recommended extracorporeal removal in the case of severe theophylline poisoning.

Evaluation of PCC long-term durability using intermediate sized gravels to optimize mix gradations.

DOT National Transportation Integrated Search

2010-04-01

With the implementation of the 2000 Q-MC specification, an incentive is provided to produce an optimized gradation to improve placement characteristics. Also, specifications for slip-formed barrier rail have changed to require an optimized gradation....

Self-poisoning of the mind.

PubMed

Elster, Jon

2010-01-27

Rational-choice theory tries to explain behaviour on the assumption that individuals optimize. Some forms of irrational behaviour can be explained by assuming that the individual is subject to hedonic, pleasure-seeking mechanisms, such as wishful thinking or adaptive preference formation. In this paper, I draw attention to psychic mechanisms, originating in the individual, which make her worse off. I first consider the ideas of counterwishful thinking and of counteradaptive preference formation and then, drawing heavily on Proust, the self-poisoning of the mind that occurs through the operation of amour-propre.

Self-poisoning of the mind

PubMed Central

Elster, Jon

2010-01-01

Rational-choice theory tries to explain behaviour on the assumption that individuals optimize. Some forms of irrational behaviour can be explained by assuming that the individual is subject to hedonic, pleasure-seeking mechanisms, such as wishful thinking or adaptive preference formation. In this paper, I draw attention to psychic mechanisms, originating in the individual, which make her worse off. I first consider the ideas of counterwishful thinking and of counteradaptive preference formation and then, drawing heavily on Proust, the self-poisoning of the mind that occurs through the operation of amour-propre. PMID:20026460

[A social history of carbon monoxide poisoning in Korea in 1960s: from an accident due to carelessness to a social disease].

PubMed

Kim, Ock-Joo; Park, Se Hong

2012-08-31

This paper deals with social history of carbon monoxide poisoning in Korea in 1960s. From the mid 1950s, Korean society began to use coal briquettes (Yeontan) for fuel for cooking and heating in the winter, especially in urban area. As the use of coal briquettes replaced fire woods which had been used as fuel in traditional Korean society for centuries, incidence and deaths from carbon monoxide poisoning increased dramatically during the 1960s. The coal briquettes were used to heat the living rooms through "Ondol" arrangement. The coal briquettes at the kitchen place make the heated air and smoke, which pass through the horizontal space under a stone floor of the room and escape through chimney at the opposite site of the kitchen. This Ondol system could make leakage of carbon monoxide easily and thereby kill people who sleep in the room. In the 1960s, carbon monoxide poisoning by briquettes gas was a serious health problem to kill more people than all of the infectious diseases. It was a unique and very serious health hazard in 1960s Korea. No other place in the world has experienced such a high mortality and incidence from the briquettes gas as in Korea. Employing newspaper articles and epidemiological papers, this paper analyzes how the Korean society experienced and perceived carbon monoxide poisoning (CO poisoning) in 1960s. It also follows how the perception changed over time and how the changes affected social responses to CO poisoning. In the early 1960s, the CO poisoning was perceived as an accident due to carelessness of the people who did not fix the leakages of the Ondol system or that of the people who built the Ondol improperly. Mostly CO poisoning was the casualty caused by carelessness and ignorance of the poor class. The prevention measure was mainly education which would enlighten the ignorant so that they care about CO poisoning and their lives. It was the victims who were to be blamed, for they caused the their poisoning with their own carelessness. Since CO poisoning was perceived as preventable with a good care, people were optimistic about the prevention of the CO poisoning. In the late 1960s, however, the perception of CO poisoning changed as the epidemiological studies demonstrated meteorological, social, economical, and cultural factors were related to the poisoning. As CO poisoning was regarded not as an accident due to carelessness but as a social disease, the Korean government began to take various measures for its control including surveillance and punishment, education and certification of those who made Ondol, and funding research for detoxification of the poisoning. In spite of the state's intervention, the number of CO poisoning cases drastically increased every year. At the end of 1960s, in contrast to the optimism of the early 1960s, the outlook of CO poisoning control was grim. It was merely a beginning of huge epidemic of CO poisoning in 1970s and 1980s in Korea. The Korean Society for the History of Medicine.

Optimal sensors placement and spillover suppression

NASA Astrophysics Data System (ADS)

Hanis, Tomas; Hromcik, Martin

2012-04-01

A new approach to optimal placement of sensors (OSP) in mechanical structures is presented. In contrast to existing methods, the presented procedure enables a designer to seek for a trade-off between the presence of desirable modes in captured measurements and the elimination of influence of those mode shapes that are not of interest in a given situation. An efficient numerical algorithm is presented, developed from an existing routine based on the Fischer information matrix analysis. We consider two requirements in the optimal sensor placement procedure. On top of the classical EFI approach, the sensors configuration should also minimize spillover of unwanted higher modes. We use the information approach to OSP, based on the effective independent method (EFI), and modify the underlying criterion to meet both of our requirements—to maximize useful signals and minimize spillover of unwanted modes at the same time. Performance of our approach is demonstrated by means of examples, and a flexible Blended Wing Body (BWB) aircraft case study related to a running European-level FP7 research project 'ACFA 2020—Active Control for Flexible Aircraft'.

Strain sensors optimal placement for vibration-based structural health monitoring. The effect of damage on the initially optimal configuration

NASA Astrophysics Data System (ADS)

Loutas, T. H.; Bourikas, A.

2017-12-01

We revisit the optimal sensor placement of engineering structures problem with an emphasis on in-plane dynamic strain measurements and to the direction of modal identification as well as vibration-based damage detection for structural health monitoring purposes. The approach utilized is based on the maximization of a norm of the Fisher Information Matrix built with numerically obtained mode shapes of the structure and at the same time prohibit the sensorization of neighbor degrees of freedom as well as those carrying similar information, in order to obtain a satisfactory coverage. A new convergence criterion of the Fisher Information Matrix (FIM) norm is proposed in order to deal with the issue of choosing an appropriate sensor redundancy threshold, a concept recently introduced but not further investigated concerning its choice. The sensor configurations obtained via a forward sequential placement algorithm are sub-optimal in terms of FIM norm values but the selected sensors are not allowed to be placed in neighbor degrees of freedom providing thus a better coverage of the structure and a subsequent better identification of the experimental mode shapes. The issue of how service induced damage affects the initially nominated as optimal sensor configuration is also investigated and reported. The numerical model of a composite sandwich panel serves as a representative aerospace structure upon which our investigations are based.

Patterning control strategies for minimum edge placement error in logic devices

NASA Astrophysics Data System (ADS)

Mulkens, Jan; Hanna, Michael; Slachter, Bram; Tel, Wim; Kubis, Michael; Maslow, Mark; Spence, Chris; Timoshkov, Vadim

2017-03-01

In this paper we discuss the edge placement error (EPE) for multi-patterning semiconductor manufacturing. In a multi-patterning scheme the creation of the final pattern is the result of a sequence of lithography and etching steps, and consequently the contour of the final pattern contains error sources of the different process steps. We describe the fidelity of the final pattern in terms of EPE, which is defined as the relative displacement of the edges of two features from their intended target position. We discuss our holistic patterning optimization approach to understand and minimize the EPE of the final pattern. As an experimental test vehicle we use the 7-nm logic device patterning process flow as developed by IMEC. This patterning process is based on Self-Aligned-Quadruple-Patterning (SAQP) using ArF lithography, combined with line cut exposures using EUV lithography. The computational metrology method to determine EPE is explained. It will be shown that ArF to EUV overlay, CDU from the individual process steps, and local CD and placement of the individual pattern features, are the important contributors. Based on the error budget, we developed an optimization strategy for each individual step and for the final pattern. Solutions include overlay and CD metrology based on angle resolved scatterometry, scanner actuator control to enable high order overlay corrections and computational lithography optimization to minimize imaging induced pattern placement errors of devices and metrology targets.

Optimization of Geothermal Well Placement under Geological Uncertainty

NASA Astrophysics Data System (ADS)

Schulte, Daniel O.; Arnold, Dan; Demyanov, Vasily; Sass, Ingo; Geiger, Sebastian

2017-04-01

Well placement optimization is critical to commercial success of geothermal projects. However, uncertainties of geological parameters prohibit optimization based on a single scenario of the subsurface, particularly when few expensive wells are to be drilled. The optimization of borehole locations is usually based on numerical reservoir models to predict reservoir performance and entails the choice of objectives to optimize (total enthalpy, minimum enthalpy rate, production temperature) and the development options to adjust (well location, pump rate, difference in production and injection temperature). Optimization traditionally requires trying different development options on a single geological realization yet there are many possible different interpretations possible. Therefore, we aim to optimize across a range of representative geological models to account for geological uncertainty in geothermal optimization. We present an approach that uses a response surface methodology based on a large number of geological realizations selected by experimental design to optimize the placement of geothermal wells in a realistic field example. A large number of geological scenarios and design options were simulated and the response surfaces were constructed using polynomial proxy models, which consider both geological uncertainties and design parameters. The polynomial proxies were validated against additional simulation runs and shown to provide an adequate representation of the model response for the cases tested. The resulting proxy models allow for the identification of the optimal borehole locations given the mean response of the geological scenarios from the proxy (i.e. maximizing or minimizing the mean response). The approach is demonstrated on the realistic Watt field example by optimizing the borehole locations to maximize the mean heat extraction from the reservoir under geological uncertainty. The training simulations are based on a comprehensive semi-synthetic data set of a hierarchical benchmark case study for a hydrocarbon reservoir, which specifically considers the interpretational uncertainty in the modeling work flow. The optimal choice of boreholes prolongs the time to cold water breakthrough and allows for higher pump rates and increased water production temperatures.

Optimal training for emergency needle thoracostomy placement by prehospital personnel: didactic teaching versus a cadaver-based training program.

PubMed

Grabo, Daniel; Inaba, Kenji; Hammer, Peter; Karamanos, Efstathios; Skiada, Dimitra; Martin, Matthew; Sullivan, Maura; Demetriades, Demetrios

2014-09-01

Tension pneumothorax can rapidly progress to cardiac arrest and death if not promptly recognized and appropriately treated. We sought to evaluate the effectiveness of traditional didactic slide-based lectures (SBLs) as compared with fresh tissue cadaver-based training (CBT) for placement of needle thoracostomy (NT). Forty randomly selected US Navy corpsmen were recruited to participate from incoming classes of the Navy Trauma Training Center at the LAC + USC Medical Center and were then randomized to one of two NT teaching methods. The following outcomes were compared between the two study arms: (1) time required to perform the procedure, (2) correct placement of the needle, and (3) magnitude of deviation from the correct position. During the study period, a total of 40 corpsmen were enrolled, 20 randomized to SBL and 20 to CBT arms. When outcomes were analyzed, time required to NT placement was not different between the two arms. Examination of the location of needle placement revealed marked differences between the two study groups. Only a minority of the SBL group (35%) placed the NT correctly in the second intercostal space. In comparison, the majority of corpsmen assigned to the CBT group demonstrated accurate placement in the second intercostal space (75%). In a CBT module, US Navy corpsmen were better trained to place NT accurately than their traditional didactic SBL counterparts. Further studies are indicated to identify the optimal components of effective simulation training for NT and other emergent interventions.

Optimization of Ultrasound Transducer Positioning for Endotracheal Tube Placement Confirmation in Cadaveric Model.

PubMed

Lonchena, Tiffany; So, Sokpoleak; Ibinson, James; Roolf, Peter; Orebaugh, Steven L

2017-02-01

Sonography has been suggested as a possible means of endotracheal tube (ETT) placement confirmation. However, optimum ultrasound transducer placement has not been established. Using a cadaveric model, ETT placement by the sonographic appearance at the thyroid cartilage, cricoid cartilage, and suprasternal notch in the upper airway was assessed to determine which ultrasound transducer placement offered the most optimal images for ETT confirmation in the airway. One provider intubated 5 cadavers, with the ultrasound transducer at each of the 3 levels, for a total of 30 intubations per specimen, while 2 providers assigned a visual score of 1 (subtle), 2 (clear), or 3 (pronounced) to each sonogram of the ETT in the airway. At the level of the thyroid cartilage, tracheal intubation was detected at a rate of 40%, with a median visualization scale of 1 (subtle movement). At the level of the cricoid cartilage, the visualization scale improved to a median of 2 (clear movement), with a 70% intubation detection rate. At the level of the suprasternal notch, 100% of the tracheal intubations were visualized on sonography, with a median score of 3 (pronounced movement). In comparing sonographic detection of ETT placement at 3 levels of the upper airway in a cadaveric model, our results clearly indicate that visualization was superior at the level of the suprasternal notch, with 100% of intubations detected with the best visualization scores. © 2017 by the American Institute of Ultrasound in Medicine.

Optimizing Spacecraft Placement for Liaison Constellations

NASA Technical Reports Server (NTRS)

Chow, C. Channing; Villac, Benjamin F.; Lo, Martin W.

2011-01-01

A navigation and communications network is proposed to support an anticipated need for infrastructure in the Earth-Moon system. Periodic orbits will host the constellations while a novel, autonomous navigation strategy will guide the spacecraft along their path strictly based on satellite-to-satellite telemetry. In particular, this paper investigates the second stage of a larger constellation optimization scheme for multi-spacecraft systems. That is, following an initial orbit down-selection process, this analysis provides insights into the ancillary problem of spacecraft placement. Two case studies are presented that consider configurations of up to four spacecraft for a halo orbit and a cycler trajectory.

Human topoisomerase I poisoning: docking protoberberines into a structure-based binding site model

NASA Astrophysics Data System (ADS)

Kettmann, Viktor; Košt'álová, Daniela; Höltje, Hans-Dieter

2004-12-01

Using the X-ray crystal structure of the human topoisomerase I (top1) - DNA cleavable complex and the Sybyl software package, we have developed a general model for the ternary cleavable complex formed with four protoberberine alkaloids differing in the substitution on the terminal phenyl rings and covering a broad range of the top1-poisoning activities. This model has the drug intercalated with its planar chromophore between the -1 and +1 base pairs flanking the cleavage site, with the nonplanar portion pointing into the minor groove. The ternary complexes were geometry-optimized and relative interaction energies, computed by using the Tripos force field, were found to rank in correct order the biological potency of the compounds; in addition, the model is also consistent with the top1-poisoning inactivity of berberine, a major prototype of the protoberberine alkaloids. The model might serve as a rational basis for elaboration of the most active compound as a lead structure, in order to develop more potent top1 poisons as next generation anti-cancer drugs.

New Approach to Optimize the Apfs Placement Based on Instantaneous Reactive Power Theory by Genetic Algorithm

NASA Astrophysics Data System (ADS)

Hashemi-Dezaki, Hamed; Mohammadalizadeh-Shabestary, Masoud; Askarian-Abyaneh, Hossein; Rezaei-Jegarluei, Mohammad

2014-01-01

In electrical distribution systems, a great amount of power are wasting across the lines, also nowadays power factors, voltage profiles and total harmonic distortions (THDs) of most loads are not as would be desired. So these important parameters of a system play highly important role in wasting money and energy, and besides both consumers and sources are suffering from a high rate of distortions and even instabilities. Active power filters (APFs) are innovative ideas for solving of this adversity which have recently used instantaneous reactive power theory. In this paper, a novel method is proposed to optimize the allocation of APFs. The introduced method is based on the instantaneous reactive power theory in vectorial representation. By use of this representation, it is possible to asses different compensation strategies. Also, APFs proper placement in the system plays a crucial role in either reducing the losses costs and power quality improvement. To optimize the APFs placement, a new objective function has been defined on the basis of five terms: total losses, power factor, voltage profile, THD and cost. Genetic algorithm has been used to solve the optimization problem. The results of applying this method to a distribution network illustrate the method advantages.

Influence of model errors in optimal sensor placement

NASA Astrophysics Data System (ADS)

Vincenzi, Loris; Simonini, Laura

2017-02-01

The paper investigates the role of model errors and parametric uncertainties in optimal or near optimal sensor placements for structural health monitoring (SHM) and modal testing. The near optimal set of measurement locations is obtained by the Information Entropy theory; the results of placement process considerably depend on the so-called covariance matrix of prediction error as well as on the definition of the correlation function. A constant and an exponential correlation function depending on the distance between sensors are firstly assumed; then a proposal depending on both distance and modal vectors is presented. With reference to a simple case-study, the effect of model uncertainties on results is described and the reliability and the robustness of the proposed correlation function in the case of model errors are tested with reference to 2D and 3D benchmark case studies. A measure of the quality of the obtained sensor configuration is considered through the use of independent assessment criteria. In conclusion, the results obtained by applying the proposed procedure on a real 5-spans steel footbridge are described. The proposed method also allows to better estimate higher modes when the number of sensors is greater than the number of modes of interest. In addition, the results show a smaller variation in the sensor position when uncertainties occur.

Optimizing placements of ground-based snow sensors for areal snow cover estimation using a machine-learning algorithm and melt-season snow-LiDAR data

NASA Astrophysics Data System (ADS)

Oroza, C.; Zheng, Z.; Glaser, S. D.; Bales, R. C.; Conklin, M. H.

2016-12-01

We present a structured, analytical approach to optimize ground-sensor placements based on time-series remotely sensed (LiDAR) data and machine-learning algorithms. We focused on catchments within the Merced and Tuolumne river basins, covered by the JPL Airborne Snow Observatory LiDAR program. First, we used a Gaussian mixture model to identify representative sensor locations in the space of independent variables for each catchment. Multiple independent variables that govern the distribution of snow depth were used, including elevation, slope, and aspect. Second, we used a Gaussian process to estimate the areal distribution of snow depth from the initial set of measurements. This is a covariance-based model that also estimates the areal distribution of model uncertainty based on the independent variable weights and autocorrelation. The uncertainty raster was used to strategically add sensors to minimize model uncertainty. We assessed the temporal accuracy of the method using LiDAR-derived snow-depth rasters collected in water-year 2014. In each area, optimal sensor placements were determined using the first available snow raster for the year. The accuracy in the remaining LiDAR surveys was compared to 100 configurations of sensors selected at random. We found the accuracy of the model from the proposed placements to be higher and more consistent in each remaining survey than the average random configuration. We found that a relatively small number of sensors can be used to accurately reproduce the spatial patterns of snow depth across the basins, when placed using spatial snow data. Our approach also simplifies sensor placement. At present, field surveys are required to identify representative locations for such networks, a process that is labor intensive and provides limited guarantees on the networks' representation of catchment independent variables.

The placement of equipment in the Space Station Freedom using constraint based reasoning

NASA Technical Reports Server (NTRS)

Tanner, Steve; Fennel, Randy

1991-01-01

This paper describes the Rack Equipment Placement and Optimization System. The primary objective of this system is to assist engineers with the placement of equipment into the racks of the modules of Space Station Freedom. It accomplishes this by showing a user where equipment placement is possible and by generating potential layouts. The system uses an explicit representation of integration constraints to search for potential solutions for individual rack equipment items. A simulated annealing process is being evaluated for total solution generation as well. Versions of this system are in use now and are assisting with the development of the Space Station Freedom at the Marshall Space Flight Center in Huntsville, Alabama.

In-Place Training: Optimizing Rural Health Workforce Outcomes through Rural-Based Education in Australia

ERIC Educational Resources Information Center

May, Jennifer; Brown, Leanne; Burrows, Julie

2018-01-01

The medical workforce shortfall in rural areas is a major issue influencing the nature of undergraduate medical education in Australia. Exposing undergraduates to rural life through rural clinical school (RCS) placements is seen as a key strategy to address workforce imbalances. We investigated the influence of an extended RCS placement and rural…

Trade-offs and efficiencies in optimal budget-constrained multispecies corridor networks

Treesearch

Bistra Dilkina; Rachel Houtman; Carla P. Gomes; Claire A. Montgomery; Kevin S. McKelvey; Katherine Kendall; Tabitha A. Graves; Richard Bernstein; Michael K. Schwartz

2016-01-01

Conservation biologists recognize that a system of isolated protected areas will be necessary but insufficient to meet biodiversity objectives. Current approaches to connecting core conservation areas through corridors consider optimal corridor placement based on a single optimization goal: commonly, maximizing the movement for a target species across a...

The evolving high: new designer drugs of abuse.

PubMed

Pourmand, A; Armstrong, P; Mazer-Amirshahi, M; Shokoohi, H

2014-10-01

Over the past decade, emerging drugs of abuse and synthetic derivatives of more traditional agents have flooded the market. While Europe was the first to experience a surge in the use of drugs such as synthetic cathinones and cannabinoids, poison centers throughout the United States have seen a dramatic rise in calls related to these new designer drugs of abuse. In the majority of cases, care is largely supportive but significant medical and traumatic complications may occur. Providers must be aware of the ever-changing trends in abuse, so that they may optimally care for poisoned patients. © The Author(s) 2014.

Establishing the ferret as a gyrencephalic animal model of traumatic brain injury: Optimization of controlled cortical impact procedures.

PubMed

Schwerin, Susan C; Hutchinson, Elizabeth B; Radomski, Kryslaine L; Ngalula, Kapinga P; Pierpaoli, Carlo M; Juliano, Sharon L

2017-06-15

Although rodent TBI studies provide valuable information regarding the effects of injury and recovery, an animal model with neuroanatomical characteristics closer to humans may provide a more meaningful basis for clinical translation. The ferret has a high white/gray matter ratio, gyrencephalic neocortex, and ventral hippocampal location. Furthermore, ferrets are amenable to behavioral training, have a body size compatible with pre-clinical MRI, and are cost-effective. We optimized the surgical procedure for controlled cortical impact (CCI) using 9 adult male ferrets. We used subject-specific brain/skull morphometric data from anatomical MRIs to overcome across-subject variability for lesion placement. We also reflected the temporalis muscle, closed the craniotomy, and used antibiotics. We then gathered MRI, behavioral, and immunohistochemical data from 6 additional animals using the optimized surgical protocol: 1 control, 3 mild, and 1 severely injured animals (surviving one week) and 1 moderately injured animal surviving sixteen weeks. The optimized surgical protocol resulted in consistent injury placement. Astrocytic reactivity increased with injury severity showing progressively greater numbers of astrocytes within the white matter. The density and morphological changes of microglia amplified with injury severity or time after injury. Motor and cognitive impairments scaled with injury severity. The optimized surgical methods differ from those used in the rodent, and are integral to success using a ferret model. We optimized ferret CCI surgery for consistent injury placement. The ferret is an excellent animal model to investigate pathophysiological and behavioral changes associated with TBI. Published by Elsevier B.V.

Cardiac MR in robotic heart surgery for preoperative identification of the target vessel and precise port placement--a theoretical model.

PubMed

Bergmann, P; Huber, S; Segl, H; Maechler, H; Reiter, U; Reiter, G; Rienmueller, R; Oberwalder, P; Rigler, B

2003-08-01

The identification of the ideal anastomosis site and the proper port placement are critical for the success of closed-chest robotic surgery. We investigated a new systematic procedure for precise port placement for TECABs. We used trigonometry and a human thoracic model to determine the optimal working angles between anastomotic plane, instruments, and endoscope. We then applied the results to seven human subjects as follows: 1. A navigation grid was located extrathoracically before cardiac MR examination. 2. The ideal anastomosis site was defined with the MR. Intrathoracic distances and angles were computed with cardiac MR software and projected onto the thorax. 3. The ideal port placement points were marked on the thorax. The optimal working angle between endoscope and instruments was 35 degrees. 0 degrees and 90 degrees angles were associated with a significant reduction in visualization, technical ease, quality and anastomosis time. The course of the LAD was identified in all seven volunteers with MR. Mean deviation of the endoscope port from the medioclavicular line was 4.3+/-2.1 cm and of the instrument ports from the anterior axillary line 8.4+/-2.4 cm. Cardiac MR in combination with the navigation grid proved suitable for the visualization of coronary vessels for individually calculating port placement points on the thorax.

Optimal placement of actuators and sensors in control augmented structural optimization

NASA Technical Reports Server (NTRS)

Sepulveda, A. E.; Schmit, L. A., Jr.

1990-01-01

A control-augmented structural synthesis methodology is presented in which actuator and sensor placement is treated in terms of (0,1) variables. Structural member sizes and control variables are treated simultaneously as design variables. A multiobjective utopian approach is used to obtain a compromise solution for inherently conflicting objective functions such as strucutal mass control effort and number of actuators. Constraints are imposed on transient displacements, natural frequencies, actuator forces and dynamic stability as well as controllability and observability of the system. The combinatorial aspects of the mixed - (0,1) continuous variable design optimization problem are made tractable by combining approximation concepts with branch and bound techniques. Some numerical results for example problems are presented to illustrate the efficacy of the design procedure set forth.

Optimizing Virtual Network Functions Placement in Virtual Data Center Infrastructure Using Machine Learning

NASA Astrophysics Data System (ADS)

Bolodurina, I. P.; Parfenov, D. I.

2018-01-01

We have elaborated a neural network model of virtual network flow identification based on the statistical properties of flows circulating in the network of the data center and characteristics that describe the content of packets transmitted through network objects. This enabled us to establish the optimal set of attributes to identify virtual network functions. We have established an algorithm for optimizing the placement of virtual data functions using the data obtained in our research. Our approach uses a hybrid method of visualization using virtual machines and containers, which enables to reduce the infrastructure load and the response time in the network of the virtual data center. The algorithmic solution is based on neural networks, which enables to scale it at any number of the network function copies.

Acute soman poisoning in primates neither pretreated nor receiving immediate therapy: value of gacyclidine (GK-11) in delayed medical support.

PubMed

Lallement, G; Clarençon, D; Galonnier, M; Baubichon, D; Burckhart, M F; Peoc'h, M

1999-03-01

Organophosphorus (OP) nerve agents are still used as warfare and terrorism compounds. Classical delayed treatment of victims of organophosphate poisoning includes combined i.v. administration of a cholinesterase reactivator (an oxime), a muscarinic cholinergic receptor antagonist (atropine) and a benzodiazepine anticonvulsant (diazepam). The objective of this study was to evaluate, in a realistic setting, the therapeutic benefit of administration of GK-11 (gacyclidine), an antiglutamatergic compound, as a complement to the above therapy against organophosphate poisoning. Gacyclidine was injected (i.v.) in combination with atropine/diazepam/pralidoxime at man-equivalent doses after a 45- or 30-min latency period to intoxicated primates (2 LD50). The effects of gacyclidine on the animals' survival, electroencephalographic (EEG) activity, signs of toxicity, recovery after challenge and central nervous system histology were examined. The present data demonstrated that atropine/diazepam/pralidoxime alone or combined with gacyclidine did not prevent signs of soman toxicity when treatment was delayed 45 min after poisoning. Atropine/diazepam/pralidoxime also did not control seizures or prevent neuropathology in primates exhibiting severe signs of poisoning when treatment was commenced 30 min after intoxication. However, in this latter case, EEG recordings revealed that additional treatment with gacyclidine was able to stop soman-induced seizures and restore normal EEG activity. This drug also totally prevented the neuropathology observed 5 weeks after soman exposure in animals treated with atropine/diazepam/pralidoxime alone. Overall, in the case of severe OP-poisoning, gacyclidine represents a promising adjuvant therapy to the currently available polymedication to ensure optimal management of organophosphate poisoning in man. This drug is presently being evaluated in a human clinical trial for a different neuroprotective indication. However, it should always be kept in mind that, in the case of severe OP-poisoning, medical intervention must be conducted as early as possible.

A new machine-learning method to prognosticate paraquat poisoned patients by combining coagulation, liver, and kidney indices.

PubMed

Hu, Lufeng; Li, Huaizhong; Cai, Zhennao; Lin, Feiyan; Hong, Guangliang; Chen, Huiling; Lu, Zhongqiu

2017-01-01

The prognosis of paraquat (PQ) poisoning is highly correlated to plasma PQ concentration, which has been identified as the most important index in PQ poisoning. This study investigated the predictive value of coagulation, liver, and kidney indices in prognosticating PQ-poisoning patients, when aligned with plasma PQ concentrations. Coagulation, liver, and kidney indices were first analyzed by variance analysis, receiver operating characteristic curves, and Fisher discriminant analysis. Then, a new, intelligent, machine learning-based system was established to effectively provide prognostic analysis of PQ-poisoning patients based on a combination of the aforementioned indices. In the proposed system, an enhanced extreme learning machine wrapped with a grey wolf-optimization strategy was developed to predict the risk status from a pool of 103 patients (56 males and 47 females); of these, 52 subjects were deceased and 51 alive. The proposed method was rigorously evaluated against this real-life dataset, in terms of accuracy, Matthews correlation coefficients, sensitivity, and specificity. Additionally, the feature selection was investigated to identify correlating factors for risk status. The results demonstrated that there were significant differences in the coagulation, liver, and kidney indices between deceased and surviving subjects (p<0.05). Aspartate aminotransferase, prothrombin time, prothrombin activity, total bilirubin, direct bilirubin, indirect bilirubin, alanine aminotransferase, urea nitrogen, and creatinine were the most highly correlated indices in PQ poisoning and showed statistical significance (p<0.05) in predicting PQ-poisoning prognoses. According to the feature selection, the most important correlated indices were found to be associated with aspartate aminotransferase, the aspartate aminotransferase to alanine ratio, creatinine, prothrombin time, and prothrombin activity. The method proposed here showed excellent results that were better than that produced based on blood-PQ concentration alone. These promising results indicated that the combination of these indices can provide a new avenue for prognosticating the outcome of PQ poisoning.

OPTIMIZING BMP PLACEMENT AT WATERSHED-SCALE USING SUSTAIN

EPA Science Inventory

Watershed and stormwater managers need modeling tools to evaluate alternative plans for environmental quality restoration and protection needs in urban and developing areas. A watershed-scale decision-support system, based on cost optimization, provides an essential tool to suppo...

Estimating Snow Water Equivalent over the American River in the Sierra Nevada Basin Using Wireless Sensor Networks

NASA Astrophysics Data System (ADS)

Welch, S. C.; Kerkez, B.; Glaser, S. D.; Bales, R. C.; Rice, R.

2011-12-01

We have designed a basin-scale (>2000 km2) instrument cluster, made up of 20 local-scale (1-km footprint) wireless sensor networks (WSNs), to measure patterns of snow depth and snow water equivalent (SWE) across the main snowmelt producing area within the American River basin. Each of the 20 WSNs has on the order of 25 wireless nodes, with over 10 nodes actively sensing snow depth, and thus snow accumulation and melt. When combined with existing snow density measurements and full-basin satellite snowcover data, these measurements are designed to provide dense ground-truth snow properties for research and real-time SWE for water management. The design of this large-scale network is based on rigorous testing of previous, smaller-scale studies, permitting for the development of methods to significantly, and efficiently scale up network operations. Recent advances in WSN technology have resulted in a modularized strategy that permits rapid future network deployment. To select network and sensor locations, various sensor placement approaches were compared, including random placement, placement of WSNs in locations that have captured the historical basin mean, as well as a placement algorithm leveraging the covariance structure of the SWE distribution. We show that that the optimal network locations do not exhibit a uniform grid, but rather follow strategic patterns based on physiographic terrain parameters. Uncertainty estimates are also provided to assess the confidence in the placement approach. To ensure near-optimal coverage of the full basin, we validated each placement approach with a multi-year record of SWE derived from reconstruction of historical satellite measurements.

Optimal placement of multiple types of communicating sensors with availability and coverage redundancy constraints

NASA Astrophysics Data System (ADS)

Vecherin, Sergey N.; Wilson, D. Keith; Pettit, Chris L.

2010-04-01

Determination of an optimal configuration (numbers, types, and locations) of a sensor network is an important practical problem. In most applications, complex signal propagation effects and inhomogeneous coverage preferences lead to an optimal solution that is highly irregular and nonintuitive. The general optimization problem can be strictly formulated as a binary linear programming problem. Due to the combinatorial nature of this problem, however, its strict solution requires significant computational resources (NP-complete class of complexity) and is unobtainable for large spatial grids of candidate sensor locations. For this reason, a greedy algorithm for approximate solution was recently introduced [S. N. Vecherin, D. K. Wilson, and C. L. Pettit, "Optimal sensor placement with terrain-based constraints and signal propagation effects," Unattended Ground, Sea, and Air Sensor Technologies and Applications XI, SPIE Proc. Vol. 7333, paper 73330S (2009)]. Here further extensions to the developed algorithm are presented to include such practical needs and constraints as sensor availability, coverage by multiple sensors, and wireless communication of the sensor information. Both communication and detection are considered in a probabilistic framework. Communication signal and signature propagation effects are taken into account when calculating probabilities of communication and detection. Comparison of approximate and strict solutions on reduced-size problems suggests that the approximate algorithm yields quick and good solutions, which thus justifies using that algorithm for full-size problems. Examples of three-dimensional outdoor sensor placement are provided using a terrain-based software analysis tool.

Epicardial left ventricular lead placement for cardiac resynchronization therapy: optimal pace site selection with pressure-volume loops.

PubMed

Dekker, A L A J; Phelps, B; Dijkman, B; van der Nagel, T; van der Veen, F H; Geskes, G G; Maessen, J G

2004-06-01

Patients in heart failure with left bundle branch block benefit from cardiac resynchronization therapy. Usually the left ventricular pacing lead is placed by coronary sinus catheterization; however, this procedure is not always successful, and patients may be referred for surgical epicardial lead placement. The objective of this study was to develop a method to guide epicardial lead placement in cardiac resynchronization therapy. Eleven patients in heart failure who were eligible for cardiac resynchronization therapy were referred for surgery because of failed coronary sinus left ventricular lead implantation. Minithoracotomy or thoracoscopy was performed, and a temporary epicardial electrode was used for biventricular pacing at various sites on the left ventricle. Pressure-volume loops with the conductance catheter were used to select the best site for each individual patient. Relative to the baseline situation, biventricular pacing with an optimal left ventricular lead position significantly increased stroke volume (+39%, P =.01), maximal left ventricular pressure derivative (+20%, P =.02), ejection fraction (+30%, P =.007), and stroke work (+66%, P =.006) and reduced end-systolic volume (-6%, P =.04). In contrast, biventricular pacing at a suboptimal site did not significantly change left ventricular function and even worsened it in some cases. To optimize cardiac resynchronization therapy with epicardial leads, mapping to determine the best pace site is a prerequisite. Pressure-volume loops offer real-time guidance for targeting epicardial lead placement during minimal invasive surgery.

Effects of trap design and placement on capture of emerald ash borer, Agrilus planipennis

Treesearch

Joseph A. Francese; Jason B. Oliver; Ivich Fraser; Nadeer Youssef; David R. Lance; Damon J. Crook; Victor C. Mastro

2007-01-01

The ongoing objective of this research is to develop a trap that can improve the sensitivity and efficiency of emerald ash borer, Agrilus planipennis (Coleoptera: Buprestidae) Fairmaire (EAB) survey and aid the overall program in achieving its goals. As part of this work, we sought to determine the optimal location for trap placement. First we placed...

Observability-Based Guidance and Sensor Placement

NASA Astrophysics Data System (ADS)

Hinson, Brian T.

Control system performance is highly dependent on the quality of sensor information available. In a growing number of applications, however, the control task must be accomplished with limited sensing capabilities. This thesis addresses these types of problems from a control-theoretic point-of-view, leveraging system nonlinearities to improve sensing performance. Using measures of observability as an information quality metric, guidance trajectories and sensor distributions are designed to improve the quality of sensor information. An observability-based sensor placement algorithm is developed to compute optimal sensor configurations for a general nonlinear system. The algorithm utilizes a simulation of the nonlinear system as the source of input data, and convex optimization provides a scalable solution method. The sensor placement algorithm is applied to a study of gyroscopic sensing in insect wings. The sensor placement algorithm reveals information-rich areas on flexible insect wings, and a comparison to biological data suggests that insect wings are capable of acting as gyroscopic sensors. An observability-based guidance framework is developed for robotic navigation with limited inertial sensing. Guidance trajectories and algorithms are developed for range-only and bearing-only navigation that improve navigation accuracy. Simulations and experiments with an underwater vehicle demonstrate that the observability measure allows tuning of the navigation uncertainty.

Optimal sensor placement for active guided wave interrogation of complex metallic components

NASA Astrophysics Data System (ADS)

Coelho, Clyde K.; Kim, Seung Bum; Chattopadhyay, Aditi

2011-04-01

With research in structural health monitoring (SHM) moving towards increasingly complex structures for damage interrogation, the placement of sensors is becoming a key issue in the performance of the damage detection methodologies. For ultrasonic wave based approaches, this is especially important because of the sensitivity of the travelling Lamb waves to material properties, geometry and boundary conditions that may obscure the presence of damage if they are not taken into account during sensor placement. The framework proposed in this paper defines a sensing region for a pair of piezoelectric transducers in a pitch-catch damage detection approach by taking into account the material attenuation and probability of false alarm. Using information about the region interrogated by a sensoractuator pair, a simulated annealing optimization framework was implemented in order to place sensors on complex metallic geometries such that a selected minimum damage type and size could be detected with an acceptable probability of false alarm anywhere on the structure. This approach was demonstrated on a lug joint to detect a crack and on a large Naval SHM test bed and resulted in a placement of sensors that was able to interrogate all parts of the structure using the minimum number of transducers.

OPTIMAL WELL LOCATOR (OWL): A SCREENING TOOL FOR EVALUATING LOCATIONS OF MONITORING WELLS

EPA Science Inventory

The Optimal Well Locator ( OWL) program was designed and developed by USEPA to be a screening tool to evaluate and optimize the placement of wells in long term monitoring networks at small sites. The first objective of the OWL program is to allow the user to visualize the change ...

An EGO-like optimization framework for sensor placement optimization in modal analysis

NASA Astrophysics Data System (ADS)

Morlier, Joseph; Basile, Aniello; Chiplunkar, Ankit; Charlotte, Miguel

2018-07-01

In aircraft design, ground/flight vibration tests are conducted to extract aircraft’s modal parameters (natural frequencies, damping ratios and mode shapes) also known as the modal basis. The main problem in aircraft modal identification is the large number of sensors needed, which increases operational time and costs. The goal of this paper is to minimize the number of sensors by optimizing their locations in order to reconstruct a truncated modal basis of N mode shapes with a high level of accuracy in the reconstruction. There are several methods to solve sensors placement optimization (SPO) problems, but for this case an original approach has been established based on an iterative process for mode shapes reconstruction through an adaptive Kriging metamodeling approach so called efficient global optimization (EGO)-SPO. The main idea in this publication is to solve an optimization problem where the sensors locations are variables and the objective function is defined by maximizing the trace of criteria so called AutoMAC. The results on a 2D wing demonstrate a reduction of sensors by 30% using our EGO-SPO strategy.

Optimization in multi-implant placement for immediate loading in edentulous arches using a modified surgical template and prototyping: a case report.

PubMed

Jayme, Sérgio J; Muglia, Valdir A; de Oliveira, Rafael R; Novaes, Arthur B Júnior

2008-01-01

Immediate loading of dental implants shortens the treatment time and makes it possible to give the patient an esthetic appearance throughout the treatment period. Placement of dental implants requires precise planning that accounts for anatomic limitations and restorative goals. Diagnosis can be made with the assistance of computerized tomographic scanning, but transfer of planning to the surgical field is limited. Recently, novel CAD/CAM techniques such as stereolithographic rapid prototyping have been developed to build surgical guides in an attempt to improve precision of implant placement. The aim of this case report was to show a modified surgical template used throughout implant placement as an alternative to a conventional surgical guide.

Optimization of COS/FUV Spectrum Placement at Lifetime Position 4

NASA Astrophysics Data System (ADS)

De Rosa, Gisella

2017-08-01

We give a summary of the rationale, structure and preliminary analysis of the Lifetime Position 4 (LP4) special calibration program 14841, aimed at determining the optimal placement of the spectra at LP4. The program obtained deep (S/N = 60 per resel) exposures of the standard star WD0308-565 with G130M/1291 and G130M/1222 settings at -2.52" below LP3 in the cross dispersion direction. These particular settings were chosen because they have the widest footprints on the detectors. Science spectra were successfully extracted at this position without any contamination due to gain-sag at LP3.

On the Design of Smart Parking Networks in the Smart Cities: An Optimal Sensor Placement Model

PubMed Central

Bagula, Antoine; Castelli, Lorenzo; Zennaro, Marco

2015-01-01

Smart parking is a typical IoT application that can benefit from advances in sensor, actuator and RFID technologies to provide many services to its users and parking owners of a smart city. This paper considers a smart parking infrastructure where sensors are laid down on the parking spots to detect car presence and RFID readers are embedded into parking gates to identify cars and help in the billing of the smart parking. Both types of devices are endowed with wired and wireless communication capabilities for reporting to a gateway where the situation recognition is performed. The sensor devices are tasked to play one of the three roles: (1) slave sensor nodes located on the parking spot to detect car presence/absence; (2) master nodes located at one of the edges of a parking lot to detect presence and collect the sensor readings from the slave nodes; and (3) repeater sensor nodes, also called “anchor” nodes, located strategically at specific locations in the parking lot to increase the coverage and connectivity of the wireless sensor network. While slave and master nodes are placed based on geographic constraints, the optimal placement of the relay/anchor sensor nodes in smart parking is an important parameter upon which the cost and efficiency of the parking system depends. We formulate the optimal placement of sensors in smart parking as an integer linear programming multi-objective problem optimizing the sensor network engineering efficiency in terms of coverage and lifetime maximization, as well as its economic gain in terms of the number of sensors deployed for a specific coverage and lifetime. We propose an exact solution to the node placement problem using single-step and two-step solutions implemented in the Mosel language based on the Xpress-MPsuite of libraries. Experimental results reveal the relative efficiency of the single-step compared to the two-step model on different performance parameters. These results are consolidated by simulation results, which reveal that our solution outperforms a random placement in terms of both energy consumption, delay and throughput achieved by a smart parking network. PMID:26134104

On the Design of Smart Parking Networks in the Smart Cities: An Optimal Sensor Placement Model.

PubMed

Bagula, Antoine; Castelli, Lorenzo; Zennaro, Marco

2015-06-30

Smart parking is a typical IoT application that can benefit from advances in sensor, actuator and RFID technologies to provide many services to its users and parking owners of a smart city. This paper considers a smart parking infrastructure where sensors are laid down on the parking spots to detect car presence and RFID readers are embedded into parking gates to identify cars and help in the billing of the smart parking. Both types of devices are endowed with wired and wireless communication capabilities for reporting to a gateway where the situation recognition is performed. The sensor devices are tasked to play one of the three roles: (1) slave sensor nodes located on the parking spot to detect car presence/absence; (2) master nodes located at one of the edges of a parking lot to detect presence and collect the sensor readings from the slave nodes; and (3) repeater sensor nodes, also called "anchor" nodes, located strategically at specific locations in the parking lot to increase the coverage and connectivity of the wireless sensor network. While slave and master nodes are placed based on geographic constraints, the optimal placement of the relay/anchor sensor nodes in smart parking is an important parameter upon which the cost and efficiency of the parking system depends. We formulate the optimal placement of sensors in smart parking as an integer linear programming multi-objective problem optimizing the sensor network engineering efficiency in terms of coverage and lifetime maximization, as well as its economic gain in terms of the number of sensors deployed for a specific coverage and lifetime. We propose an exact solution to the node placement problem using single-step and two-step solutions implemented in the Mosel language based on the Xpress-MPsuite of libraries. Experimental results reveal the relative efficiency of the single-step compared to the two-step model on different performance parameters. These results are consolidated by simulation results, which reveal that our solution outperforms a random placement in terms of both energy consumption, delay and throughput achieved by a smart parking network.

Study on the optimum tilted angle of solar panels in Hainan tropical photovoltaic facility agricultural system

NASA Astrophysics Data System (ADS)

Wang, Jingxuan; Ge, Zhiwu; Yang, Xiaoyan; Ye, Chunhua; Lin, Yanxia

2017-04-01

Photovoltaic facility agriculture system can effectively alleviate the contradiction between limited land and Photovoltaic power generation. It’s flexible to create suitable environment for crop growth, and generate electricity over the same land at the same time. It’s necessary to set appropriate solar panel angle to get more solar energy. Through detailed analysis and comparison, we chose the Hay’s model as solar radiation model. Based on the official meteorological data got from Haikou Meteorological Bureau, and by comparing the amount of radiation obtained at different tilted angles per month, the optimal placement angle of PV panels at different seasons in Haikou was obtained through calculation, and the optimal placement angle from April to October was also obtained. Through optimized angle and arrangement of solar photovoltaic panels, we can get greater power efficiency.

OPTIMAL WELL LOCATOR (OWL): A SCREENING TOOL FOR EVALUATING LOCATIONS OF MONITORING WELLS: USER'S GUIDE VERSION 1.2

EPA Science Inventory

The Optimal Well Locator ( OWL) program was designed and developed by USEPA to be a screening tool to evaluate and optimize the placement of wells in long term monitoring networks at small sites. The first objective of the OWL program is to allow the user to visualize the change ...

Optimal sensor placement for modal testing on wind turbines

NASA Astrophysics Data System (ADS)

Schulze, Andreas; Zierath, János; Rosenow, Sven-Erik; Bockhahn, Reik; Rachholz, Roman; Woernle, Christoph

2016-09-01

The mechanical design of wind turbines requires a profound understanding of the dynamic behaviour. Even though highly detailed simulation models are already in use to support wind turbine design, modal testing on a real prototype is irreplaceable to identify site-specific conditions such as the stiffness of the tower foundation. Correct identification of the mode shapes of a complex mechanical structure much depends on the placement of the sensors. For operational modal analysis of a 3 MW wind turbine with a 120 m rotor on a 100 m tower developed by W2E Wind to Energy, algorithms for optimal placement of acceleration sensors are applied. The mode shapes used for the optimisation are calculated by means of a detailed flexible multibody model of the wind turbine. Among the three algorithms in this study, the genetic algorithm with weighted off-diagonal criterion yields the sensor configuration with the highest quality. The ongoing measurements on the prototype will be the basis for the development of optimised wind turbine designs.

Automated Fiber Placement of PEEK/IM7 Composites with Film Interleaf Layers

NASA Technical Reports Server (NTRS)

Hulcher, A. Bruce; Banks, William I., III; Pipes, R. Byron; Tiwari, Surendra N.; Cano, Roberto J.; Johnston, Norman J.; Clinton, R. G., Jr. (Technical Monitor)

2001-01-01

The incorporation of thin discrete layers of resin between plies (interleafing) has been shown to improve fatigue and impact properties of structural composite materials. Furthermore, interleafing could be used to increase the barrier properties of composites used as structural materials for cryogenic propellant storage. In this work, robotic heated-head tape placement of PEEK/IM7 composites containing a PEEK polymer film interleaf was investigated. These experiments were carried out at the NASA Langley Research Center automated fiber placement facility. Using the robotic equipment, an optimal fabrication process was developed for the composite without the interleaf. Preliminary interleaf processing trials indicated that a two-stage process was necessary; the film had to be tacked to the partially-placed laminate then fully melted in a separate operation. Screening experiments determined the relative influence of the various robotic process variables on the peel strength of the film-composite interface. Optimization studies were performed in which peel specimens were fabricated at various compaction loads and roller temperatures at each of three film melt processing rates. The resulting data were fitted with quadratic response surfaces. Additional specimens were fabricated at placement parameters predicted by the response surface models to yield high peel strength in an attempt to gage the accuracy of the predicted response and assess the repeatability of the process. The overall results indicate that quality PEEK/lM7 laminates having film interleaves can be successfully and repeatability fabricated by heated head automated fiber placement.

A risk-based multi-objective model for optimal placement of sensors in water distribution system

NASA Astrophysics Data System (ADS)

Naserizade, Sareh S.; Nikoo, Mohammad Reza; Montaseri, Hossein

2018-02-01

In this study, a new stochastic model based on Conditional Value at Risk (CVaR) and multi-objective optimization methods is developed for optimal placement of sensors in water distribution system (WDS). This model determines minimization of risk which is caused by simultaneous multi-point contamination injection in WDS using CVaR approach. The CVaR considers uncertainties of contamination injection in the form of probability distribution function and calculates low-probability extreme events. In this approach, extreme losses occur at tail of the losses distribution function. Four-objective optimization model based on NSGA-II algorithm is developed to minimize losses of contamination injection (through CVaR of affected population and detection time) and also minimize the two other main criteria of optimal placement of sensors including probability of undetected events and cost. Finally, to determine the best solution, Preference Ranking Organization METHod for Enrichment Evaluation (PROMETHEE), as a subgroup of Multi Criteria Decision Making (MCDM) approach, is utilized to rank the alternatives on the trade-off curve among objective functions. Also, sensitivity analysis is done to investigate the importance of each criterion on PROMETHEE results considering three relative weighting scenarios. The effectiveness of the proposed methodology is examined through applying it to Lamerd WDS in the southwestern part of Iran. The PROMETHEE suggests 6 sensors with suitable distribution that approximately cover all regions of WDS. Optimal values related to CVaR of affected population and detection time as well as probability of undetected events for the best optimal solution are equal to 17,055 persons, 31 mins and 0.045%, respectively. The obtained results of the proposed methodology in Lamerd WDS show applicability of CVaR-based multi-objective simulation-optimization model for incorporating the main uncertainties of contamination injection in order to evaluate extreme value of losses in WDS.

The Role of Echocardiography in the Optimization of Cardiac Resynchronization Therapy: Current Evidence and Future Perspectives.

PubMed

Spartalis, Michael; Tzatzaki, Eleni; Spartalis, Eleftherios; Damaskos, Christos; Athanasiou, Antonios; Livanis, Efthimios; Voudris, Vassilis

2017-01-01

Cardiac resynchronization therapy (CRT) has become a mainstay in the management of heart failure. Up to one-third of patients who received resynchronization devices do not experience the full benefits of CRT. The clinical factors influencing the likelihood to respond to the therapy are wide QRS complex, left bundle branch block, female gender, non-ischaemic cardiomyopathy (highest responders), male gender, ischaemic cardiomyopathy (moderate responders) and narrow QRS complex, non-left bundle branch block (lowest, non-responders). This review provides a conceptual description of the role of echocardiography in the optimization of CRT. A literature survey was performed using PubMed database search to gather information regarding CRT and echocardiography. A total of 70 studies met selection criteria for inclusion in the review. Echocardiography helps in the initial selection of the patients with dyssynchrony, which will benefit the most from optimal biventricular pacing and provides a guide to left ventricular (LV) lead placement during implantation. Different echocardiographic parameters have shown promise and can offer the possibility of patient selection, response prediction, lead placement optimization strategies and optimization of device configurations. LV ejection fraction along with specific electrocardiographic criteria remains the cornerstone of CRT patient selection. Echocardiography is a non-invasive, cost-effective, highly reproducible method with certain limitations and accuracy that is affected by measurement errors. Echocardiography can assist with the identification of the appropriate electromechanical substrate of CRT response and LV lead placement. The targeted approach can improve the haemodynamic response, as also the patient-specific parameters estimation.

The Role of Echocardiography in the Optimization of Cardiac Resynchronization Therapy: Current Evidence and Future Perspectives

PubMed Central

Spartalis, Michael; Tzatzaki, Eleni; Spartalis, Eleftherios; Damaskos, Christos; Athanasiou, Antonios; Livanis, Efthimios; Voudris, Vassilis

2017-01-01

Background: Cardiac resynchronization therapy (CRT) has become a mainstay in the management of heart failure. Up to one-third of patients who received resynchronization devices do not experience the full benefits of CRT. The clinical factors influencing the likelihood to respond to the therapy are wide QRS complex, left bundle branch block, female gender, non-ischaemic cardiomyopathy (highest responders), male gender, ischaemic cardiomyopathy (moderate responders) and narrow QRS complex, non-left bundle branch block (lowest, non-responders). Objective: This review provides a conceptual description of the role of echocardiography in the optimization of CRT. Method: A literature survey was performed using PubMed database search to gather information regarding CRT and echocardiography. Results: A total of 70 studies met selection criteria for inclusion in the review. Echocardiography helps in the initial selection of the patients with dyssynchrony, which will benefit the most from optimal biventricular pacing and provides a guide to left ventricular (LV) lead placement during implantation. Different echocardiographic parameters have shown promise and can offer the possibility of patient selection, response prediction, lead placement optimization strategies and optimization of device configurations. Conclusion: LV ejection fraction along with specific electrocardiographic criteria remains the cornerstone of CRT patient selection. Echocardiography is a non-invasive, cost-effective, highly reproducible method with certain limitations and accuracy that is affected by measurement errors. Echocardiography can assist with the identification of the appropriate electromechanical substrate of CRT response and LV lead placement. The targeted approach can improve the haemodynamic response, as also the patient-specific parameters estimation. PMID:29387277

Formulation and Optimization of Robust Sensor Placement Problems for Drinking Water Contamination Warning Systems

DOE PAGES

Watson, Jean-Paul; Murray, Regan; Hart, William E.

2009-11-13

We report that the sensor placement problem in contamination warning system design for municipal water distribution networks involves maximizing the protection level afforded by limited numbers of sensors, typically quantified as the expected impact of a contamination event; the issue of how to mitigate against high-consequence events is either handled implicitly or ignored entirely. Consequently, expected-case sensor placements run the risk of failing to protect against high-consequence 9/11-style attacks. In contrast, robust sensor placements address this concern by focusing strictly on high-consequence events and placing sensors to minimize the impact of these events. We introduce several robust variations of themore » sensor placement problem, distinguished by how they quantify the potential damage due to high-consequence events. We explore the nature of robust versus expected-case sensor placements on three real-world large-scale distribution networks. We find that robust sensor placements can yield large reductions in the number and magnitude of high-consequence events, with only modest increases in expected impact. Finally, the ability to trade-off between robust and expected-case impacts is a key unexplored dimension in contamination warning system design.« less

Data centers as dispatchable loads to harness stranded power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Kibaek; Yang, Fan; Zavala, Victor M.

Here, we analyze how traditional data center placement and optimal placement of dispatchable data centers affect power grid efficiency. We use detailed network models, stochastic optimization formulations, and diverse renewable generation scenarios to perform our analysis. Our results reveal that significant spillage and stranded power will persist in power grids as wind power levels are increased. A counter-intuitive finding is that collocating data centers with inflexible loads next to wind farms has limited impacts on renewable portfolio standard (RPS) goals because it provides limited system-level flexibility. Such an approach can, in fact, increase stranded power and fossil-fueled generation. In contrast,more » optimally placing data centers that are dispatchable provides system-wide flexibility, reduces stranded power, and improves efficiency. In short, optimally placed dispatchable computing loads can enable better scaling to high RPS. In our case study, we find that these dispatchable computing loads are powered to 60-80% of their requested capacity, indicating that there are significant economic incentives provided by stranded power.« less

Data centers as dispatchable loads to harness stranded power

DOE PAGES

Kim, Kibaek; Yang, Fan; Zavala, Victor M.; ...

2016-07-20

Here, we analyze how traditional data center placement and optimal placement of dispatchable data centers affect power grid efficiency. We use detailed network models, stochastic optimization formulations, and diverse renewable generation scenarios to perform our analysis. Our results reveal that significant spillage and stranded power will persist in power grids as wind power levels are increased. A counter-intuitive finding is that collocating data centers with inflexible loads next to wind farms has limited impacts on renewable portfolio standard (RPS) goals because it provides limited system-level flexibility. Such an approach can, in fact, increase stranded power and fossil-fueled generation. In contrast,more » optimally placing data centers that are dispatchable provides system-wide flexibility, reduces stranded power, and improves efficiency. In short, optimally placed dispatchable computing loads can enable better scaling to high RPS. In our case study, we find that these dispatchable computing loads are powered to 60-80% of their requested capacity, indicating that there are significant economic incentives provided by stranded power.« less

Optimal Robust Motion Controller Design Using Multiobjective Genetic Algorithm

PubMed Central

Svečko, Rajko

2014-01-01

This paper describes the use of a multiobjective genetic algorithm for robust motion controller design. Motion controller structure is based on a disturbance observer in an RIC framework. The RIC approach is presented in the form with internal and external feedback loops, in which an internal disturbance rejection controller and an external performance controller must be synthesised. This paper involves novel objectives for robustness and performance assessments for such an approach. Objective functions for the robustness property of RIC are based on simple even polynomials with nonnegativity conditions. Regional pole placement method is presented with the aims of controllers' structures simplification and their additional arbitrary selection. Regional pole placement involves arbitrary selection of central polynomials for both loops, with additional admissible region of the optimized pole location. Polynomial deviation between selected and optimized polynomials is measured with derived performance objective functions. A multiobjective function is composed of different unrelated criteria such as robust stability, controllers' stability, and time-performance indexes of closed loops. The design of controllers and multiobjective optimization procedure involve a set of the objectives, which are optimized simultaneously with a genetic algorithm—differential evolution. PMID:24987749

A medical/vocational case coordination system for persons with brain injury: an evaluation of employment outcomes.

PubMed

Malec, J F; Buffington, A L; Moessner, A M; Degiorgio, L

2000-08-01

To evaluate initial placement and 1-year employment outcomes of a Medical/Vocational Case Coordination System (MVCCS) for persons with brain injury (BI) that provides: (1) early case identification and coordination, (2) appropriate medical and vocational rehabilitation interventions, (3) work trials, and (4) supported employment interventions including job coaching. One hundred fourteen Minnesota residents, ages 18 to 65 years, with acquired BI. Five levels of Vocational Independence Scale (VIS). Preinjury employment status (VIS) and years of education, severity of initial injury, time since injury, current impairment/disability as measured by the Rasch-analyzed Staff Mayo-Portland Adaptability Inventory (MPAI), and impaired self-awareness measured by staff rating and the difference between Staff MPAI and Survivor MPAI. At placement, 46% in independent work; 25% in transitional placements; 9% in long-term supported employment; 10% in sheltered work; and 10% not placed. At 1-year follow-up (n = 101), 53% in independent work; 19% in transitional placement; 9% in supported work; 6% in sheltered work; and 13% unemployed. Regression analyses showed time since injury and Rasch Staff MPAI predicted VIS at placement; only VIS at placement independently predicted VIS at 1-year follow-up; Rasch Staff MPAI and preinjury education level predicted time to placement. The MVCCS optimized vocational outcome after BI. Time since injury and impairment/disability best predicted vocational placement. Level of initial placement best predicted employment status at follow-up. Persons with greater disability required more extended time and more extensive rehabilitation services before placement.

Finite element analysis and genetic algorithm optimization design for the actuator placement on a large adaptive structure

NASA Astrophysics Data System (ADS)

Sheng, Lizeng

The dissertation focuses on one of the major research needs in the area of adaptive/intelligent/smart structures, the development and application of finite element analysis and genetic algorithms for optimal design of large-scale adaptive structures. We first review some basic concepts in finite element method and genetic algorithms, along with the research on smart structures. Then we propose a solution methodology for solving a critical problem in the design of a next generation of large-scale adaptive structures---optimal placements of a large number of actuators to control thermal deformations. After briefly reviewing the three most frequently used general approaches to derive a finite element formulation, the dissertation presents techniques associated with general shell finite element analysis using flat triangular laminated composite elements. The element used here has three nodes and eighteen degrees of freedom and is obtained by combining a triangular membrane element and a triangular plate bending element. The element includes the coupling effect between membrane deformation and bending deformation. The membrane element is derived from the linear strain triangular element using Cook's transformation. The discrete Kirchhoff triangular (DKT) element is used as the plate bending element. For completeness, a complete derivation of the DKT is presented. Geometrically nonlinear finite element formulation is derived for the analysis of adaptive structures under the combined thermal and electrical loads. Next, we solve the optimization problems of placing a large number of piezoelectric actuators to control thermal distortions in a large mirror in the presence of four different thermal loads. We then extend this to a multi-objective optimization problem of determining only one set of piezoelectric actuator locations that can be used to control the deformation in the same mirror under the action of any one of the four thermal loads. A series of genetic algorithms, GA Version 1, 2 and 3, were developed to find the optimal locations of piezoelectric actuators from the order of 1021 ˜ 1056 candidate placements. Introducing a variable population approach, we improve the flexibility of selection operation in genetic algorithms. Incorporating mutation and hill climbing into micro-genetic algorithms, we are able to develop a more efficient genetic algorithm. Through extensive numerical experiments, we find that the design search space for the optimal placements of a large number of actuators is highly multi-modal and that the most distinct nature of genetic algorithms is their robustness. They give results that are random but with only a slight variability. The genetic algorithms can be used to get adequate solution using a limited number of evaluations. To get the highest quality solution, multiple runs including different random seed generators are necessary. The investigation time can be significantly reduced using a very coarse grain parallel computing. Overall, the methodology of using finite element analysis and genetic algorithm optimization provides a robust solution approach for the challenging problem of optimal placements of a large number of actuators in the design of next generation of adaptive structures.

Depth Optimization Study

DOE Data Explorer

Kawase, Mitsuhiro

2009-11-22

The zipped file contains a directory of data and routines used in the NNMREC turbine depth optimization study (Kawase et al., 2011), and calculation results thereof. For further info, please contact Mitsuhiro Kawase at kawase@uw.edu. Reference: Mitsuhiro Kawase, Patricia Beba, and Brian Fabien (2011), Finding an Optimal Placement Depth for a Tidal In-Stream Conversion Device in an Energetic, Baroclinic Tidal Channel, NNMREC Technical Report.

Application of cellular automatons and ant algorithms in avionics

NASA Astrophysics Data System (ADS)

Kuznetsov, A. V.; Selvesiuk, N. I.; Platoshin, G. A.; Semenova, E. V.

2018-03-01

The paper considers two algorithms for searching quasi-optimal solutions of discrete optimization problems with regard to the tasks of avionics placing. The first one solves the problem of optimal placement of devices by installation locations, the second one is for the problem of finding the shortest route between devices. Solutions are constructed using a cellular automaton and the ant colony algorithm.

Optimal Magnetic Sensor Vests for Cardiac Source Imaging

PubMed Central

Lau, Stephan; Petković, Bojana; Haueisen, Jens

2016-01-01

Magnetocardiography (MCG) non-invasively provides functional information about the heart. New room-temperature magnetic field sensors, specifically magnetoresistive and optically pumped magnetometers, have reached sensitivities in the ultra-low range of cardiac fields while allowing for free placement around the human torso. Our aim is to optimize positions and orientations of such magnetic sensors in a vest-like arrangement for robust reconstruction of the electric current distributions in the heart. We optimized a set of 32 sensors on the surface of a torso model with respect to a 13-dipole cardiac source model under noise-free conditions. The reconstruction robustness was estimated by the condition of the lead field matrix. Optimization improved the condition of the lead field matrix by approximately two orders of magnitude compared to a regular array at the front of the torso. Optimized setups exhibited distributions of sensors over the whole torso with denser sampling above the heart at the front and back of the torso. Sensors close to the heart were arranged predominantly tangential to the body surface. The optimized sensor setup could facilitate the definition of a standard for sensor placement in MCG and the development of a wearable MCG vest for clinical diagnostics. PMID:27231910

Linear quadratic regulators with eigenvalue placement in a horizontal strip

NASA Technical Reports Server (NTRS)

Shieh, Leang S.; Dib, Hani M.; Ganesan, Sekar

1987-01-01

A method for optimally shifting the imaginary parts of the open-loop poles of a multivariable control system to the desirable closed-loop locations is presented. The optimal solution with respect to a quadratic performance index is obtained by solving a linear matrix Liapunov equation.

The use of an automated interactive voice response system to manage medication identification calls to a poison center.

PubMed

Krenzelok, Edward P; Mrvos, Rita

2009-05-01

In 2007, medication identification requests (MIRs) accounted for 26.2% of all calls to U.S. poison centers. MIRs are documented with minimal information, but they still require an inordinate amount of work by specialists in poison information (SPI). An analysis was undertaken to identify options to reduce the impact of MIRs on both human and financial resources. All MIRs (2003-2007) to a certified regional poison information center were analyzed to determine call patterns and staffing. The data were used to justify an efficient and cost-effective solution. MIRs represented 42.3% of the 2007 call volume. Optimal staffing would require hiring an additional four full-time equivalent SPI. An interactive voice response (IVR) system was developed to respond to the MIRs. The IVR was used to develop the Medication Identification System that allowed the diversion of up to 50% of the MIRs, enhancing surge capacity and allowing specialists to address the more emergent poison exposure calls. This technology is an entirely voice-activated response call management system that collects zip code, age, gender and drug data and stores all responses as .csv files for reporting purposes. The query bank includes the 200 most common MIRs, and the system features text-to-voice synthesis that allows easy modification of the drug identification menu. Callers always have the option of engaging a SPI at any time during the IVR call flow. The IVR is an efficient and effective alternative that creates better staff utilization.

A heuristic for deriving the optimal number and placement of reconnaissance sensors

NASA Astrophysics Data System (ADS)

Nanda, S.; Weeks, J.; Archer, M.

2008-04-01

A key to mastering asymmetric warfare is the acquisition of accurate intelligence on adversaries and their assets in urban and open battlefields. To achieve this, one needs adequate numbers of tactical sensors placed in locations to optimize coverage, where optimality is realized by covering a given area of interest with the least number of sensors, or covering the largest possible subsection of an area of interest with a fixed set of sensors. Unfortunately, neither problem admits a polynomial time algorithm as a solution, and therefore, the placement of such sensors must utilize intelligent heuristics instead. In this paper, we present a scheme implemented on parallel SIMD processing architectures to yield significantly faster results, and that is highly scalable with respect to dynamic changes in the area of interest. Furthermore, the solution to the first problem immediately translates to serve as a solution to the latter if and when any sensors are rendered inoperable.

On the placement of active members in adaptive truss structures for vibration control

NASA Technical Reports Server (NTRS)

Lu, L.-Y.; Utku, S.; Wada, B. K.

1992-01-01

The problem of optimal placement of active members which are used for vibration control in adaptive truss structures is investigated. The control scheme is based on the method of eigenvalue assignment as a means of shaping the transient response of the controlled adaptive structures, and the minimization of required control action is considered as the optimization criterion. To this end, a performance index which measures the control strokes of active members is formulated in an efficient way. In order to reduce the computation burden, particularly for the case where the locations of active members have to be selected from a large set of available sites, several heuristic searching schemes are proposed for obtaining the near-optimal locations. The proposed schemes significantly reduce the computational complexity of placing multiple active members to the order of that when a single active member is placed.

Placement of implantable cardioverter-defibrillators in paediatric and congenital heart defect patients: a pipeline for model generation and simulation prediction of optimal configurations

PubMed Central

Rantner, Lukas J; Vadakkumpadan, Fijoy; Spevak, Philip J; Crosson, Jane E; Trayanova, Natalia A

2013-01-01

There is currently no reliable way of predicting the optimal implantable cardioverter-defibrillator (ICD) placement in paediatric and congenital heart defect (CHD) patients. This study aimed to: (1) develop a new image processing pipeline for constructing patient-specific heart–torso models from clinical magnetic resonance images (MRIs); (2) use the pipeline to determine the optimal ICD configuration in a paediatric tricuspid valve atresia patient; (3) establish whether the widely used criterion of shock-induced extracellular potential (Φe) gradients ≥5 V cm−1 in ≥95% of ventricular volume predicts defibrillation success. A biophysically detailed heart–torso model was generated from patient MRIs. Because transvenous access was impossible, three subcutaneous and three epicardial lead placement sites were identified along with five ICD scan locations. Ventricular fibrillation was induced, and defibrillation shocks were applied from 11 ICD configurations to determine defibrillation thresholds (DFTs). Two configurations with epicardial leads resulted in the lowest DFTs overall and were thus considered optimal. Three configurations shared the lowest DFT among subcutaneous lead ICDs. The Φe gradient criterion was an inadequate predictor of defibrillation success, as defibrillation failed in numerous instances even when 100% of the myocardium experienced such gradients. In conclusion, we have developed a new image processing pipeline and applied it to a CHD patient to construct the first active heart–torso model from clinical MRIs. PMID:23798492

A quantitative method for optimized placement of continuous air monitors.

PubMed

Whicker, Jeffrey J; Rodgers, John C; Moxley, John S

2003-11-01

Alarming continuous air monitors (CAMs) are a critical component for worker protection in facilities that handle large amounts of hazardous materials. In nuclear facilities, continuous air monitors alarm when levels of airborne radioactive materials exceed alarm thresholds, thus prompting workers to exit the room to reduce inhalation exposures. To maintain a high level of worker protection, continuous air monitors are required to detect radioactive aerosol clouds quickly and with good sensitivity. This requires that there are sufficient numbers of continuous air monitors in a room and that they are well positioned. Yet there are no published methodologies to quantitatively determine the optimal number and placement of continuous air monitors in a room. The goal of this study was to develop and test an approach to quantitatively determine optimal number and placement of continuous air monitors in a room. The method we have developed uses tracer aerosol releases (to simulate accidental releases) and the measurement of the temporal and spatial aspects of the dispersion of the tracer aerosol through the room. The aerosol dispersion data is then analyzed to optimize continuous air monitor utilization based on simulated worker exposure. This method was tested in a room within a Department of Energy operated plutonium facility at the Savannah River Site in South Carolina, U.S. Results from this study show that the value of quantitative airflow and aerosol dispersion studies is significant and that worker protection can be significantly improved while balancing the costs associated with CAM programs.

Fabrication of Thermoplastic Composite Laminates Having Film Interleaves By Automated Fiber Placement

NASA Technical Reports Server (NTRS)

Hulcher, A. B.; Tiwari, S. N.; Marchello, J. M.; Johnston, Norman J. (Technical Monitor)

2001-01-01

Experiments were carried out at the NASA Langley Research Center automated Fiber placement facility to determine an optimal process for the fabrication of composite materials having polymer film interleaves. A series of experiments was conducted to determine an optimal process for the composite prior to investigation of a process to fabricate laminates with polymer films. The results of the composite tests indicated that a well-consolidated, void-free laminate could be attained. Preliminary interleaf processing trials were then conducted to establish some broad guidelines for film processing. The primary finding of these initial studies was that a two-stage process was necessary in order to process these materials adequately. A screening experiment was then performed to determine the relative influence of the process variables on the quality of the film interface as determined by the wedge peel test method. Parameters that were found to be of minor influence on specimen quality were subsequently held at fixed values enabling a more rapid determination of an optimal process. Optimization studies were then performed by varying the remaining parameters at three film melt processing rates. The resulting peel data were fitted with quadratic response surfaces. Additional specimens were fabricated at levels of high peel strength as predicted by the regression models in an attempt to gage the accuracy of the predicted response and to assess the repeatability of the process. The overall results indicate that quality laminates having film interleaves can be successfully and repeatably fabricated by automated fiber placement.

Selection and placement of best management practices used to reduce water quality degradation in Lincoln Lake watershed

NASA Astrophysics Data System (ADS)

Rodriguez, Hector German; Popp, Jennie; Maringanti, Chetan; Chaubey, Indrajeet

2011-01-01

An increased loss of agricultural nutrients is a growing concern for water quality in Arkansas. Several studies have shown that best management practices (BMPs) are effective in controlling water pollution. However, those affected with water quality issues need water management plans that take into consideration BMPs selection, placement, and affordability. This study used a nondominated sorting genetic algorithm (NSGA-II). This multiobjective algorithm selects and locates BMPs that minimize nutrients pollution cost-effectively by providing trade-off curves (optimal fronts) between pollutant reduction and total net cost increase. The usefulness of this optimization framework was evaluated in the Lincoln Lake watershed. The final NSGA-II optimization model generated a number of near-optimal solutions by selecting from 35 BMPs (combinations of pasture management, buffer zones, and poultry litter application practices). Selection and placement of BMPs were analyzed under various cost solutions. The NSGA-II provides multiple solutions that could fit the water management plan for the watershed. For instance, by implementing all the BMP combinations recommended in the lowest-cost solution, total phosphorous (TP) could be reduced by at least 76% while increasing cost by less than 2% in the entire watershed. This value represents an increase in cost of 5.49 ha-1 when compared to the baseline. Implementing all the BMP combinations proposed with the medium- and the highest-cost solutions could decrease TP drastically but will increase cost by 24,282 (7%) and $82,306 (25%), respectively.

A triaxial accelerometer monkey algorithm for optimal sensor placement in structural health monitoring

NASA Astrophysics Data System (ADS)

Jia, Jingqing; Feng, Shuo; Liu, Wei

2015-06-01

Optimal sensor placement (OSP) technique is a vital part of the field of structural health monitoring (SHM). Triaxial accelerometers have been widely used in the SHM of large-scale structures in recent years. Triaxial accelerometers must be placed in such a way that all of the important dynamic information is obtained. At the same time, the sensor configuration must be optimal, so that the test resources are conserved. The recommended practice is to select proper degrees of freedom (DOF) based upon several criteria and the triaxial accelerometers are placed at the nodes corresponding to these DOFs. This results in non-optimal placement of many accelerometers. A ‘triaxial accelerometer monkey algorithm’ (TAMA) is presented in this paper to solve OSP problems of triaxial accelerometers. The EFI3 measurement theory is modified and involved in the objective function to make it more adaptable in the OSP technique of triaxial accelerometers. A method of calculating the threshold value based on probability theory is proposed to improve the healthy rate of monkeys in a troop generation process. Meanwhile, the processes of harmony ladder climb and scanning watch jump are proposed and given in detail. Finally, Xinghai NO.1 Bridge in Dalian is implemented to demonstrate the effectiveness of TAMA. The final results obtained by TAMA are compared with those of the original monkey algorithm and EFI3 measurement, which show that TAMA can improve computational efficiency and get a better sensor configuration.

Thermal stress analysis of sulfur deactivated solid oxide fuel cells

NASA Astrophysics Data System (ADS)

Zeng, Shumao; Parbey, Joseph; Yu, Guangsen; Xu, Min; Li, Tingshuai; Andersson, Martin

2018-03-01

Hydrogen sulfide in fuels can deactivate catalyst for solid oxide fuel cells, which has become one of the most critical challenges to stability. The reactions between sulfur and catalyst will cause phase changes, leading to increase in cell polarization and mechanical mismatch. A three-dimensional computational fluid dynamics (CFD) approach based on the finite element method (FEM) is thus used to investigate the polarization, temperature and thermal stress in a sulfur deactivated SOFC by coupling equations for gas-phase species, heat, momentum, ion and electron transport. The results indicate that sulfur in fuels can strongly affect the cell polarization and thermal stresses, which shows a sharp decrease in the vicinity of electrolyte when 10% nickel in the functional layer is poisoned, but they remain almost unchanged even when the poisoned Ni content was increased to 90%. This investigation is helpful to deeply understand the sulfur poisoning effects and also benefit the material design and optimization of electrode structure to enhance cell performance and lifetimes in various hydrocarbon fuels containing impurities.

The use of self-expanding silicone stents in esophageal cancer care: optimal pre-, peri-, and postoperative care.

PubMed

Martin, Robert; Duvall, Ryan; Ellis, Susan; Scoggins, Charles R

2009-03-01

Preoperative nutritional supplementation, management of esophageal leaks, and postoperative anastomotic strictures still remain common problems in the management of esophageal cancer. Jejunal feeding tubes, total parenteral nutrition (TPN) with nasogastric suction, and repeated esophageal dilations remain the most common treatments, respectively. The aim of this study was to evaluate the use of removable silicone stents in (1) the preoperative nutritional optimization during neoadjuvant therapy, (2) the management of perioperative anastomotic leak, and (3) the management of postoperative anastomotic strictures. Review of our prospectively maintained esophageal database identified 15 patients who had removable self-expanding silicone stents placed in the management of one of these three management problems from July 2004 to August 2006. Preoperative therapy: Five patients underwent initial stent placement in preparation for neoadjuvant therapy. Dysphagia relief was seen in 100% of patients, with optimal caloric needs taken within 24 h of placement. All patients tolerated neoadjuvant therapy without delay from dehydration or malnutrition. One stent migration was found at the time of operation, which was removed without sequelae. Perioperative therapy: Five patients developed delayed (>10 days) esophageal leaks that were managed with removable esophageal stent and percutaneous drainage (in three patients). All patients had successful exclusion of the leak on the day of the procedure with resumption of oral intake on the evening of procedure. All five healed leaks without sequelae. Postoperative therapy: Five patients developed postoperative anastomotic strictures that required dilation and placement of removable esophageal stent. The median number of dilations was 1 (range 1-2), with all stents placed for approximate 3 months duration. All patients had immediate dysphagia relief after stent placement. Removable esophageal stents are novel treatment option to optimize relief of symptoms and return the patients back to a more normal oral intake. Continued evaluation is needed to consider stent use as first-line therapy.

Co-optimization of lithographic and patterning processes for improved EPE performance

NASA Astrophysics Data System (ADS)

Maslow, Mark J.; Timoshkov, Vadim; Kiers, Ton; Jee, Tae Kwon; de Loijer, Peter; Morikita, Shinya; Demand, Marc; Metz, Andrew W.; Okada, Soichiro; Kumar, Kaushik A.; Biesemans, Serge; Yaegashi, Hidetami; Di Lorenzo, Paolo; Bekaert, Joost P.; Mao, Ming; Beral, Christophe; Larivière, Stephane

2017-03-01

Complimentary lithography is already being used for advanced logic patterns. The tight pitches for 1D Metal layers are expected to be created using spacer based multiple patterning ArF-i exposures and the more complex cut/block patterns are made using EUV exposures. At the same time, control requirements of CDU, pattern shift and pitch-walk are approaching sub-nanometer levels to meet edge placement error (EPE) requirements. Local variability, such as Line Edge Roughness (LER), Local CDU, and Local Placement Error (LPE), are dominant factors in the total Edge Placement error budget. In the lithography process, improving the imaging contrast when printing the core pattern has been shown to improve the local variability. In the etch process, it has been shown that the fusion of atomic level etching and deposition can also improve these local variations. Co-optimization of lithography and etch processing is expected to further improve the performance over individual optimizations alone. To meet the scaling requirements and keep process complexity to a minimum, EUV is increasingly seen as the platform for delivering the exposures for both the grating and the cut/block patterns beyond N7. In this work, we evaluated the overlay and pattern fidelity of an EUV block printed in a negative tone resist on an ArF-i SAQP grating. High-order Overlay modeling and corrections during the exposure can reduce overlay error after development, a significant component of the total EPE. During etch, additional degrees of freedom are available to improve the pattern placement error in single layer processes. Process control of advanced pitch nanoscale-multi-patterning techniques as described above is exceedingly complicated in a high volume manufacturing environment. Incorporating potential patterning optimizations into both design and HVM controls for the lithography process is expected to bring a combined benefit over individual optimizations. In this work we will show the EPE performance improvement for a 32nm pitch SAQP + block patterned Metal 2 layer by cooptimizing the lithography and etch processes. Recommendations for further improvements and alternative processes will be given.

Accounting for connectivity and spatial correlation in the optimal placement of wildlife habitat

Treesearch

John Hof; Curtis H. Flather

1996-01-01

This paper investigates optimization approaches to simultaneously modelling habitat fragmentation and spatial correlation between patch populations. The problem is formulated with habitat connectivity affecting population means and variances, with spatial correlations accounted for in covariance calculations. Population with a pre-specifled confidence level is then...

Untitled

Cancer.gov

A collaborative study on colposcopic biopsy with aims to study cervical disease on the lesion level, optimize criteria for biopsy placement, and analyze the incremental benefit of taking multiple biopsies

Avoiding Pitfalls of Tibiotalocalcaneal Nail Malposition With Internal Rotation Axial Heel View.

PubMed

Callahan, Ryan; Juliano, Paul; Aydogan, Umur; Clayton, Justin

2018-04-01

Tibiotalocalcaneal (TTC) nails are often used for complex hind foot arthrodesis and deformity correction. The natural valgus alignment of the hindfoot creates a challenge to optimum placement of the guidewire and eventual nail with a straight or valgus-curved nail. Five fresh frozen cadavers were used for placement of a TTC guidewire with standard anterior-posterior (AP), lateral, and Harris axial heel views as a reference for proper placement. The limb was then rotated 15°, 30°, and 45° both internally and externally to evaluate the perceived amount of osseous purchase within the calcaneus. The TTC nail was then inserted and dissection was performed to demonstrate proximity of the nail to the sustentaculum tali and neurovascular structures. A 30° internal rotation Harris axial heel view demonstrated the most accurate representation of osseous purchase within the calcaneus with the guidewire and nail placement. When the guidewire was placed with standard imaging the nail was often ultimately placed in close proximity to the sustentaculum tali and neurovascular structures. Careful placement of the guidewire prior to reaming and nail placement should be undertaken to avoid neurovascular injury and to increase osseous purchase. For optimal guidewire placement, the authors suggest using appropriate anatomic landmarks and using a 30° internally rotated Harris axial heel view to verify correct placement. Level V: Expert opinion.

Design of a sensor network for structural health monitoring of a full-scale composite horizontal tail

NASA Astrophysics Data System (ADS)

Gao, Dongyue; Wang, Yishou; Wu, Zhanjun; Rahim, Gorgin; Bai, Shengbao

2014-05-01

The detection capability of a given structural health monitoring (SHM) system strongly depends on its sensor network placement. In order to minimize the number of sensors while maximizing the detection capability, optimal design of the PZT sensor network placement is necessary for structural health monitoring (SHM) of a full-scale composite horizontal tail. In this study, the sensor network optimization was simplified as a problem of determining the sensor array placement between stiffeners to achieve the desired the coverage rate. First, an analysis of the structural layout and load distribution of a composite horizontal tail was performed. The constraint conditions of the optimal design were presented. Then, the SHM algorithm of the composite horizontal tail under static load was proposed. Based on the given SHM algorithm, a sensor network was designed for the full-scale composite horizontal tail structure. Effective profiles of cross-stiffener paths (CRPs) and uncross-stiffener paths (URPs) were estimated by a Lamb wave propagation experiment in a multi-stiffener composite specimen. Based on the coverage rate and the redundancy requirements, a seven-sensor array-network was chosen as the optimal sensor network for each airfoil. Finally, a preliminary SHM experiment was performed on a typical composite aircraft structure component. The reliability of the SHM result for a composite horizontal tail structure under static load was validated. In the result, the red zone represented the delamination damage. The detection capability of the optimized sensor network was verified by SHM of a full-scale composite horizontal tail; all the diagnosis results were obtained in two minutes. The result showed that all the damage in the monitoring region was covered by the sensor network.

Test Scheduling for Core-Based SOCs Using Genetic Algorithm Based Heuristic Approach

NASA Astrophysics Data System (ADS)

Giri, Chandan; Sarkar, Soumojit; Chattopadhyay, Santanu

This paper presents a Genetic algorithm (GA) based solution to co-optimize test scheduling and wrapper design for core based SOCs. Core testing solutions are generated as a set of wrapper configurations, represented as rectangles with width equal to the number of TAM (Test Access Mechanism) channels and height equal to the corresponding testing time. A locally optimal best-fit heuristic based bin packing algorithm has been used to determine placement of rectangles minimizing the overall test times, whereas, GA has been utilized to generate the sequence of rectangles to be considered for placement. Experimental result on ITC'02 benchmark SOCs shows that the proposed method provides better solutions compared to the recent works reported in the literature.

Improvement of in-hospital telemetry monitoring in coronary care units: an intervention study for achieving optimal electrode placement and attachment, hygiene and delivery of critical information to patients.

PubMed

Pettersen, Trond R; Fålun, Nina; Norekvål, Tone M

2014-12-01

In-hospital telemetry monitoring is important for diagnosis and treatment of patients at risk of developing life-threatening arrhythmias. It is widely used in critical and non-critical care wards. Nurses are responsible for correct electrode placement, thus ensuring optimal quality of the monitoring. The aims of this study were to determine whether a complex educational intervention improves (a) optimal electrode placement, (b) hygiene, and (c) delivery of critical information to patients (reason for monitoring, limitations in cellular phone use, and not to leave the ward without informing a member of staff). A prospective interventional study design was used, with data collection occurring over two six-week periods: before implementation of the intervention (n=201) and after the intervention (n=165). Standard abstraction forms were used to obtain data on patients' clinical characteristics, and 10 variables related to electrode placement and attachment, hygiene and delivery of critical information. At pre-intervention registration, 26% of the electrodes were misplaced. Twelve per cent of the patients received information about limiting their cellular phone use while monitored, 70% were informed of the purpose of monitoring, and 71% used a protective cover for their unit. Post-intervention, outcome measures for the three variables improved significantly: use of protective cover (p<0.001), information about the purpose of monitoring (p=0.005) and information about limitations in cellular phone use (p=0.003). Nonetheless, 23% of the electrodes were still misplaced. The study highlights the need for better, continued education for in-hospital telemetry monitoring in coronary care units, and other units that monitor patients with telemetry. © The European Society of Cardiology 2013.

Optical network unit placement in Fiber-Wireless (FiWi) access network by Moth-Flame optimization algorithm

NASA Astrophysics Data System (ADS)

Singh, Puja; Prakash, Shashi

2017-07-01

Hybrid wireless-optical broadband access network (WOBAN) or Fiber-Wireless (FiWi) is the integration of wireless access network and optical network. This hybrid multi-domain network adopts the advantages of wireless and optical domains and serves the demand of technology savvy users. FiWi exhibits the properties of cost effectiveness, robustness, flexibility, high capacity, reliability and is self organized. Optical Network Unit (ONU) placement problem in FiWi contributes in simplifying the network design and enhances the performance in terms of cost efficiency and increased throughput. Several individual-based algorithms, such as Simulated Annealing (SA), Tabu Search, etc. have been suggested for ONU placement, but these algorithms suffer from premature convergence (trapping in a local optima). The present research work undertakes the deployment of FiWi and proposes a novel nature-inspired heuristic paradigm called Moth-Flame optimization (MFO) algorithm for multiple optical network units' placement. MFO is a population based algorithm. Population-based algorithms are better in handling local optima avoidance. The simulation results are compared with the existing Greedy and Simulated Annealing algorithms to optimize the position of ONUs. To the best of our knowledge, MFO algorithm has been used for the first time in this domain, moreover it has been able to provide very promising and competitive results. The performance of MFO algorithm has been analyzed by varying the 'b' parameter. MFO algorithm results in faster convergence than the existing strategies of Greedy and SA and returns a lower value of overall cost function. The results exhibit the dependence of the objective function on the distribution of wireless users also.

TAILORING CATALYSTS FOR HYDRODECHLORINATING CHLORINATED HYDROCARBON CONTAMINANTS IN GROUNDWATER. (R825689C078)

EPA Science Inventory

Abstract

A palladium-on-zeolite catalyst has been optimized for treating groundwater contaminated with halogenated hydrocarbon compounds (HHCs) by hydrodechlorination with dissolved hydrogen. Aqueous sulfite was used as the model poison and the dechlorination of 1,2-di...

TAILORING CATALYSTS FOR HYDRODECHLORINATING CHLORINATED HYDROCARBON CONTAMINANTS IN GROUNDWATER. (R825689C093)

EPA Science Inventory

Abstract

A palladium-on-zeolite catalyst has been optimized for treating groundwater contaminated with halogenated hydrocarbon compounds (HHCs) by hydrodechlorination with dissolved hydrogen. Aqueous sulfite was used as the model poison and the dechlorination of 1,2-di...

A collaborative approach to improving and expanding an experiential education program.

PubMed

Cox, Cheryl E; Lindblad, Adrienne J

2012-04-10

The lessons learned from a collaboration between a faculty of pharmacy and a practice site that involved implementation of an innovative experiential placement model are described, as well as the broader impact of the project on other practice sites, the faculty of pharmacy's experiential education program, and experiential placement capacity. The partnerships and collaborative strategies formed were key to the implementation and evaluation of a pharmacy student clinical teaching unit pilot program and integration of concepts used in the unit into the advanced pharmacy practice experience (APPE) program to enhance capacity and quality. The university-practice partnerships have made it possible to promote the delegation of responsibility and accountability for patient care to students, challenge the anticipated workload burden for preceptors, question the optimal length of an APPE placement, and highlight the value of higher student-to-preceptor ratios that facilitate peer-assisted learning (PAL) and optimize the practice learning experiences for preceptors and students. Collaboration in experiential education between universities and practice sites can provide opportunities to address challenges faced by practitioners and academics alike.

Hierarchical planning for a surface mounting machine placement.

PubMed

Zeng, You-jiao; Ma, Deng-ze; Jin, Ye; Yan, Jun-qi

2004-11-01

For a surface mounting machine (SMM) in printed circuit board (PCB) assembly line, there are four problems, e.g. CAD data conversion, nozzle selection, feeder assignment and placement sequence determination. A hierarchical planning for them to maximize the throughput rate of an SMM is presented here. To minimize set-up time, a CAD data conversion system was first applied that could automatically generate the data for machine placement from CAD design data files. Then an effective nozzle selection approach implemented to minimize the time of nozzle changing. And then, to minimize picking time, an algorithm for feeder assignment was used to make picking multiple components simultaneously as much as possible. Finally, in order to shorten pick-and-place time, a heuristic algorithm was used to determine optimal component placement sequence according to the decided feeder positions. Experiments were conducted on a four head SMM. The experimental results were used to analyse the assembly line performance.

Optimizing habitat location for black-tailed prairie dogs in southwestern South Dakota

Treesearch

John Hof; Michael Bevers; Daniel W. Uresk; Gregory L. Schenbeck

2002-01-01

A spatial optimization model was formulated and used to maximize black-tailed prairie dog populations in the Badlands National Park and the Buffalo Gap National Grassland in South Dakota. The choice variables involved the strategic placement of limited additional protected habitat. Population dynamics were captured in formulations that reflected exponential population...

Optimal Placement of Dynamic Var Sources by Using Empirical Controllability Covariance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qi, Junjian; Huang, Weihong; Sun, Kai

In this paper, the empirical controllability covariance (ECC), which is calculated around the considered operating condition of a power system, is applied to quantify the degree of controllability of system voltages under specific dynamic var source locations. An optimal dynamic var source placement method addressing fault-induced delayed voltage recovery (FIDVR) issues is further formulated as an optimization problem that maximizes the determinant of ECC. The optimization problem is effectively solved by the NOMAD solver, which implements the mesh adaptive direct search algorithm. The proposed method is tested on an NPCC 140-bus system and the results show that the proposed methodmore » with fault specified ECC can solve the FIDVR issue caused by the most severe contingency with fewer dynamic var sources than the voltage sensitivity index (VSI)-based method. The proposed method with fault unspecified ECC does not depend on the settings of the contingency and can address more FIDVR issues than the VSI method when placing the same number of SVCs under different fault durations. It is also shown that the proposed method can help mitigate voltage collapse.« less

Computed Tomographic Analysis of Ventral Atlantoaxial Optimal Safe Implantation Corridors in 27 Dogs.

PubMed

Leblond, Guillaume; Gaitero, Luis; Moens, Noel M M; Zur Linden, Alex; James, Fiona M K; Monteith, Gabrielle J; Runciman, John

2017-11-01

Objectives  Ventral atlantoaxial stabilization techniques are challenging surgical procedures in dogs. Available surgical guidelines are based upon subjective anatomical landmarks, and limited radiographic and computed tomographic data. The aims of this study were (1) to provide detailed anatomical descriptions of atlantoaxial optimal safe implantation corridors to generate objective recommendations for optimal implant placements and (2) to compare anatomical data obtained in non-affected Toy breed dogs, affected Toy breed dogs suffering from atlantoaxial instability and non-affected Beagle dogs. Methods  Anatomical data were collected from a prospectively recruited population of 27 dogs using a previously validated method of optimal safe implantation corridor analysis using computed tomographic images. Results  Optimal implant positions and three-dimensional numerical data were generated successfully in all cases. Anatomical landmarks could be used to generate objective definitions of optimal insertion points which were applicable across all three groups. Overall the geometrical distribution of all implant sites was similar in all three groups with a few exceptions. Clinical Significance  This study provides extensive anatomical data available to facilitate surgical planning of implant placement for atlantoaxial stabilization. Our data suggest that non-affected Toy breed dogs and non-affected Beagle dogs constitute reasonable research models to study atlantoaxial stabilization constructs. Schattauer GmbH Stuttgart.

Emergency Visits for Prescription Opioid Poisonings

PubMed Central

Tadros, Allison; Layman, Shelley M.; Davis, Stephen M.; Davidov, Danielle M.; Cimino, Scott

2016-01-01

Background Prescription opioid abuse and overdose has steadily increased in the United States (U.S.) over the past two decades and current research has shown a dramatic increase in hospitalizations resulting from opioid poisonings. Still, much is unknown about the clinical and demographic features of patients presenting to emergency departments for poisoning from prescription drugs. Objective We sought to evaluate ED visits by adults for prescription opioids. Methods This was a retrospective cohort study utilizing 2006 – 2011 data from the Nationwide Emergency Department Sample (NEDS). Total number of admissions (weighted), disposition, gender, age, expected payer, income, geographic region, charges, and procedures performed were examined. Results From 2006 – 2010, there were 259,093 ED visits by adults for poisoning by opioids and 53.50% of these were unintentional. The overall mean age of patients was 45.5 with more visits made by females (52.37%). Patients who unintentionally overdosed were more likely to have Medicare (36.54%), whereas those who intentionally overdosed had private insurance (29.41%). The majority of patients reside in the South (40.93%) and come from lower-income neighborhoods. Approximately 108,504 patients were discharged and 140,395 were admitted. Conclusions There were over 250,000 visits to U.S. EDs from 2006 – 2011 with a primary diagnosis of poisoning by a prescription opioid. The majority of visits were made by females and over half were admitted to the hospital, resulting in over $4 billion in charges. Future studies should examine preventative measures, optimal screening and intervention programs for these patients. PMID:26409674

Exposure to Elevated Carbon Monoxide Levels at an Indoor Ice Arena--Wisconsin, 2014.

PubMed

Creswell, Paul D; Meiman, Jon G; Nehls-Lowe, Henry; Vogt, Christy; Wozniak, Ryan J; Werner, Mark A; Anderson, Henry

2015-11-20

On December 13, 2014, the emergency management system in Lake Delton, Wisconsin, was notified when a male hockey player aged 20 years lost consciousness after participation in an indoor hockey tournament that included approximately 50 hockey players and 100 other attendees. Elevated levels of carbon monoxide (CO) (range = 45 ppm-165 ppm) were detected by the fire department inside the arena. The emergency management system encouraged all players and attendees to seek medical evaluation for possible CO poisoning. The Wisconsin Department of Health Services (WDHS) conducted an epidemiologic investigation to determine what caused the exposure and to recommend preventive strategies. Investigators abstracted medical records from area emergency departments (EDs) for patients who sought care for CO exposure during December 13-14, 2014, conducted a follow-up survey of ED patients approximately 2 months after the event, and conducted informant interviews. Ninety-two persons sought ED evaluation for possible CO exposure, all of whom were tested for CO poisoning. Seventy-four (80%) patients had blood carboxyhemoglobin (COHb) levels consistent with CO poisoning; 32 (43%) CO poisoning cases were among hockey players. On December 15, the CO emissions from the propane-fueled ice resurfacer were demonstrated to be 4.8% of total emissions when actively resurfacing and 2.3% when idling, both above the optimal range of 0.5%-1.0%. Incomplete fuel combustion by the ice resurfacer was the most likely source of elevated CO. CO poisonings in ice arenas can be prevented through regular maintenance of ice resurfacers, installation of CO detectors, and provision of adequate ventilation.

Design for Warehouse with Product Flow Type Allocation using Linear Programming: A Case Study in a Textile Industry

NASA Astrophysics Data System (ADS)

Khannan, M. S. A.; Nafisah, L.; Palupi, D. L.

2018-03-01

Sari Warna Co. Ltd, a company engaged in the textile industry, is experiencing problems in the allocation and placement of goods in the warehouse. During this time the company has not implemented the product flow type allocation and product placement to the respective products resulting in a high total material handling cost. Therefore, this study aimed to determine the allocation and placement of goods in the warehouse corresponding to product flow type with minimal total material handling cost. This research is a quantitative research based on the theory of storage and warehouse that uses a mathematical model of optimization problem solving using mathematical optimization model approach belongs to Heragu (2005), aided by software LINGO 11.0 in the calculation of the optimization model. Results obtained from this study is the proportion of the distribution for each functional area is the area of cross-docking at 0.0734, the reserve area at 0.1894, and the forward area at 0.7372. The allocation of product flow type 1 is 5 products, the product flow type 2 is 9 products, the product flow type 3 is 2 products, and the product flow type 4 is 6 products. The optimal total material handling cost by using this mathematical model equal to Rp43.079.510 while it is equal to Rp 49.869.728 by using the company’s existing method. It saves Rp6.790.218 for the total material handling cost. Thus, all of the products can be allocated in accordance with the product flow type with minimal total material handling cost.

Targeted left ventricular lead placement to guide cardiac resynchronization therapy: the TARGET study: a randomized, controlled trial.

PubMed

Khan, Fakhar Z; Virdee, Mumohan S; Palmer, Christopher R; Pugh, Peter J; O'Halloran, Denis; Elsik, Maros; Read, Philip A; Begley, David; Fynn, Simon P; Dutka, David P

2012-04-24

This study sought to assess the impact of targeted left ventricular (LV) lead placement on outcomes of cardiac resynchronization therapy (CRT). Placement of the LV lead to the latest sites of contraction and away from the scar confers the best response to CRT. We conducted a randomized, controlled trial to compare a targeted approach to LV lead placement with usual care. A total of 220 patients scheduled for CRT underwent baseline echocardiographic speckle-tracking 2-dimensional radial strain imaging and were then randomized 1:1 into 2 groups. In group 1 (TARGET [Targeted Left Ventricular Lead Placement to Guide Cardiac Resynchronization Therapy]), the LV lead was positioned at the latest site of peak contraction with an amplitude of >10% to signify freedom from scar. In group 2 (control) patients underwent standard unguided CRT. Patients were classified by the relationship of the LV lead to the optimal site as concordant (at optimal site), adjacent (within 1 segment), or remote (≥2 segments away). The primary endpoint was a ≥15% reduction in LV end-systolic volume at 6 months. Secondary endpoints were clinical response (≥1 improvement in New York Heart Association functional class), all-cause mortality, and combined all-cause mortality and heart failure-related hospitalization. The groups were balanced at randomization. In the TARGET group, there was a greater proportion of responders at 6 months (70% vs. 55%, p = 0.031), giving an absolute difference in the primary endpoint of 15% (95% confidence interval: 2% to 28%). Compared with controls, TARGET patients had a higher clinical response (83% vs. 65%, p = 0.003) and lower rates of the combined endpoint (log-rank test, p = 0.031). Compared with standard CRT treatment, the use of speckle-tracking echocardiography to the target LV lead placement yields significantly improved response and clinical status and lower rates of combined death and heart failure-related hospitalization. (Targeted Left Ventricular Lead Placement to Guide Cardiac Resynchronization Therapy [TARGET] study); ISRCTN19717943). Copyright © 2012 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Wavelength converter placement for different RWA algorithms in wavelength-routed all-optical networks

NASA Astrophysics Data System (ADS)

Chu, Xiaowen; Li, Bo; Chlamtac, Imrich

2002-07-01

Sparse wavelength conversion and appropriate routing and wavelength assignment (RWA) algorithms are the two key factors in improving the blocking performance in wavelength-routed all-optical networks. It has been shown that the optimal placement of a limited number of wavelength converters in an arbitrary mesh network is an NP complete problem. There have been various heuristic algorithms proposed in the literature, in which most of them assume that a static routing and random wavelength assignment RWA algorithm is employed. However, the existing work shows that fixed-alternate routing and dynamic routing RWA algorithms can achieve much better blocking performance. Our study in this paper further demonstrates that the wavelength converter placement and RWA algorithms are closely related in the sense that a well designed wavelength converter placement mechanism for a particular RWA algorithm might not work well with a different RWA algorithm. Therefore, the wavelength converter placement and the RWA have to be considered jointly. The objective of this paper is to investigate the wavelength converter placement problem under fixed-alternate routing algorithm and least-loaded routing algorithm. Under the fixed-alternate routing algorithm, we propose a heuristic algorithm called Minimum Blocking Probability First (MBPF) algorithm for wavelength converter placement. Under the least-loaded routing algorithm, we propose a heuristic converter placement algorithm called Weighted Maximum Segment Length (WMSL) algorithm. The objective of the converter placement algorithm is to minimize the overall blocking probability. Extensive simulation studies have been carried out over three typical mesh networks, including the 14-node NSFNET, 19-node EON and 38-node CTNET. We observe that the proposed algorithms not only outperform existing wavelength converter placement algorithms by a large margin, but they also can achieve almost the same performance comparing with full wavelength conversion under the same RWA algorithm.

Multi Infrastructure Control and Optimization Toolkit, Resilient Design Module (MICOT-RDT), version 2.X

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bent, Russell; Nagarajan, Harsha; Yamangil, Emre

2016-06-24

MICOT is a tool for optimizing and controlling infrastructure systems. In includes modules for optimizing the operations of an infrastructure structure (for example optimal dispatch), designing infrastructure systems, restoring infrastructures systems, resiliency, preparing for natural disasters, interdicting networks, state estimation, sensor placement, and simulation of infrastructure systems. It implements algorithms developed at LANL that have been published in the academic community. This is a release of the of resilient design module of the MICOT.

Physical Health Problems and Barriers to Optimal Health Care Among Children in Foster Care.

PubMed

Deutsch, Stephanie Anne; Fortin, Kristine

2015-10-01

Children and adolescents in foster care placement represent a unique population with special health care needs, often resulting from pre-placement early adversity and neglected, unaddressed health care needs. High rates of all health problems, including acute and/or chronic physical, mental, and developmental issues prevail. Disparities in health status and access to health care are observed. This article summarizes the physical health problems of children in foster care, who are predisposed to poor health outcomes when complex care needs are unaddressed. Despite recognition of the significant burden of health care need among this unique population, barriers to effective and optimal health care delivery remain. Legislative solutions to overcome obstacles to health care delivery for children in foster care are discussed. Copyright © 2015 Mosby, Inc. All rights reserved.

Patterns of Movement in Foster Care: An Optimal Matching Analysis

PubMed Central

Havlicek, Judy

2011-01-01

Placement instability remains a vexing problem for child welfare agencies across the country. This study uses child welfare administrative data to retrospectively follow the entire placement histories (birth to age 17.5) of 474 foster youth who reached the age of majority in the state of Illinois and to search for patterns in their movement through the child welfare system. Patterns are identified through optimal matching and hierarchical cluster analyses. Multiple logistic regression is used to analyze administrative and survey data in order to examine covariates related to patterns. Five distinct patterns of movement are differentiated: Late Movers, Settled with Kin, Community Care, Institutionalized, and Early Entry. These patterns suggest high but variable rates of movement. Implications for child welfare policy and service provision are discussed. PMID:20873020

Factors affecting Cook Gunther Tulip and Cook Celect inferior vena cava filter retrieval success.

PubMed

Glocker, Roan J; Novak, Zdenek; Matthews, Thomas C; Patterson, Mark A; Jordan, William D; Pearce, Benjamin J; Passman, Marc A

2014-01-01

Success rates vary for the retrieval of inferior vena cava filters (IVCFs). The optimal retrieval time and factors influencing retrieval success remain unproven. This study aims to determine optimal time and evaluate factors related to successful IVCF retrieval. An institutional prospectively maintained database was reviewed for all IVCF retrieval attempts from 2006 to 2012. Patient demographics, comorbidities, indications for procedure, placement technique, IVCF type, presence of angulation, and time to retrieval were evaluated with respect to success or failure of retrieval. Statistical analyses (t-test, χ(2), correlations, and Kaplan-Meier plots) were performed comparing successful and unsuccessful retrievals. Of 121 attempted IVCF retrievals, 92 (76%) were successful and 29 (24%) were unsuccessful. There were no significant differences between the successful and unsuccessful attempts in terms of patient demographics, comorbidities, indications for procedure, placement technique, or IVCF type, which included 93 Celect (77%) and 28 Gunther Tulip (23%). Time since IVCF placement was significantly different (P = .025) between the successful and unsuccessful retrieval groups (medians were 105 [7-368] and 162 [43-379] days, respectively). Time since IVCF placement greater than 117 days correlated significantly with unsuccessful IVCF retrieval (R = 0.218; P = .017; odds ratio, 2.88; P = .02). Angulation greater than 20 degrees on anteroposterior radiograph was noted in seven of 29 (24%) unsuccessful retrievals compared with seven of 92 (8%) successful retrievals and was significant (P = .012). Cook Gunther Tulip and Celect IVCF retrieval is most likely to be successful within 3 to 4 months of placement. Unsuccessful retrieval attempts are more likely to occur when IVCF position is angulated. Copyright © 2014 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Optimal placement of off-stream water sources for ephemeral stream recovery

USGS Publications Warehouse

Rigge, Matthew B.; Smart, Alexander; Wylie, Bruce

2013-01-01

Uneven and/or inefficient livestock distribution is often a product of an inadequate number and distribution of watering points. Placement of off-stream water practices (OSWP) in pastures is a key consideration in rangeland management plans and is critical to achieving riparian recovery by improving grazing evenness, while improving livestock performance. Effective OSWP placement also minimizes the impacts of livestock use radiating from OSWP, known as the “piosphere.” The objective of this study was to provide land managers with recommendations for the optimum placement of OSWP. Specifically, we aimed to provide minimum offset distances of OSWP to streams and assess the effective range of OSWP using Normalized Difference Vegetation Index (NDVI) values, an indicator of live standing crop. NDVI values were determined from a time-series of Satellite Pour l'Observation de la Terre (SPOT) 20-m images of western South Dakota mixed-grass prairie. The NDVI values in ephemeral stream channels (in-channel) and uplands were extracted from pre- and post-OSWP images taken in 1989 and 2010, respectively. NDVI values were normalized to a reference imagine and subsequently by ecological site to produce nNDVI. Our results demonstrate a significant (P 2 = 0.49, P = 0.05) and increased with average distance to OSWP in a pasture (R2 = 0.43, P = 0.07). Piospheric reduction in nNDVI was observed within 200 m of OSWP, occasionally overlapping in-channel areas. The findings of this study suggest placement of OSWP 200 to 1 250 m from streams to achieve optimal results. These results can be used to increase grazing efficiency by effectively placing OSWP and insure that piospheres do not overlap ecologically important in-channel areas.

A mean field neural network for hierarchical module placement

NASA Technical Reports Server (NTRS)

Unaltuna, M. Kemal; Pitchumani, Vijay

1992-01-01

This paper proposes a mean field neural network for the two-dimensional module placement problem. An efficient coding scheme with only O(N log N) neurons is employed where N is the number of modules. The neurons are evolved in groups of N in log N iteration steps such that the circuit is recursively partitioned in alternating vertical and horizontal directions. In our simulations, the network was able to find optimal solutions to all test problems with up to 128 modules.

Predictive Cache Modeling and Analysis

DTIC Science & Technology

2011-11-01

metaheuristic /bin-packing algorithm to optimize task placement based on task communication characterization. Our previous work on task allocation showed...Cache Miss Minimization Technology To efficiently explore combinations and discover nearly-optimal task-assignment algorithms , we extended to our...it was possible to use our algorithmic techniques to decrease network bandwidth consumption by ~25%. In this effort, we adapted these existing

A Compensatory Approach to Optimal Selection with Mastery Scores. Research Report 94-2.

ERIC Educational Resources Information Center

van der Linden, Wim J.; Vos, Hans J.

This paper presents some Bayesian theories of simultaneous optimization of decision rules for test-based decisions. Simultaneous decision making arises when an institution has to make a series of selection, placement, or mastery decisions with respect to subjects from a population. An obvious example is the use of individualized instruction in…

Actuator placement in prestressed adaptive trusses for vibration control

NASA Technical Reports Server (NTRS)

Jalihal, P.; Utku, Senol; Wada, Ben K.

1993-01-01

This paper describes the optimal location selection of actuators for vibration control in prestressed adaptive trusses. Since prestressed adaptive trusses are statically indeterminate, the actuators to be used for vibration control purposes must work against (1) existing static axial prestressing forces, (2) static axial forces caused by the actuation, and (3) dynamic axial forces caused by the motion of the mass. In statically determinate adaptive trusses (1) and (2) are non - existing. The actuator placement problem in statically indeterminate trusses is therefore governed by the actuation energy and the actuator strength requirements. Assuming output feedback type control of selected vibration modes in autonomous systems, a procedure is given for the placement of vibration controlling actuators in prestressed adaptive trusses.

Development of a multiobjective optimization tool for the selection and placement of best management practices for nonpoint source pollution control

NASA Astrophysics Data System (ADS)

Maringanti, Chetan; Chaubey, Indrajeet; Popp, Jennie

2009-06-01

Best management practices (BMPs) are effective in reducing the transport of agricultural nonpoint source pollutants to receiving water bodies. However, selection of BMPs for placement in a watershed requires optimization of the available resources to obtain maximum possible pollution reduction. In this study, an optimization methodology is developed to select and place BMPs in a watershed to provide solutions that are both economically and ecologically effective. This novel approach develops and utilizes a BMP tool, a database that stores the pollution reduction and cost information of different BMPs under consideration. The BMP tool replaces the dynamic linkage of the distributed parameter watershed model during optimization and therefore reduces the computation time considerably. Total pollutant load from the watershed, and net cost increase from the baseline, were the two objective functions minimized during the optimization process. The optimization model, consisting of a multiobjective genetic algorithm (NSGA-II) in combination with a watershed simulation tool (Soil Water and Assessment Tool (SWAT)), was developed and tested for nonpoint source pollution control in the L'Anguille River watershed located in eastern Arkansas. The optimized solutions provided a trade-off between the two objective functions for sediment, phosphorus, and nitrogen reduction. The results indicated that buffer strips were very effective in controlling the nonpoint source pollutants from leaving the croplands. The optimized BMP plans resulted in potential reductions of 33%, 32%, and 13% in sediment, phosphorus, and nitrogen loads, respectively, from the watershed.

Image-guided laser projection for port placement in minimally invasive surgery.

PubMed

Marmurek, Jonathan; Wedlake, Chris; Pardasani, Utsav; Eagleson, Roy; Peters, Terry

2006-01-01

We present an application of an augmented reality laser projection system in which procedure-specific optimal incision sites, computed from pre-operative image acquisition, are superimposed on a patient to guide port placement in minimally invasive surgery. Tests were conducted to evaluate the fidelity of computed and measured port configurations, and to validate the accuracy with which a surgical tool-tip can be placed at an identified virtual target. A high resolution volumetric image of a thorax phantom was acquired using helical computed tomography imaging. Oriented within the thorax, a phantom organ with marked targets was visualized in a virtual environment. A graphical interface enabled marking the locations of target anatomy, and calculation of a grid of potential port locations along the intercostal rib lines. Optimal configurations of port positions and tool orientations were determined by an objective measure reflecting image-based indices of surgical dexterity, hand-eye alignment, and collision detection. Intra-operative registration of the computed virtual model and the phantom anatomy was performed using an optical tracking system. Initial trials demonstrated that computed and projected port placement provided direct access to target anatomy with an accuracy of 2 mm.

Therapeutic esophageal interventions for dysphagia and bleeding.

PubMed

Siersema, Peter D

2006-07-01

This article reviews the most notable results of esophageal interventions for dysphagia and bleeding published in 2005. Long-term rubber tube placement was shown to be an interesting treatment option for difficult esophageal strictures. Two studies demonstrated that only 50% of patients who had undergone pneumatic dilation for achalasia were dysphagia-free after long-term follow-up. It was shown that patients with dysphagia from esophageal cancer should be treated by intraluminal radiotherapy (brachytherapy), whereas stent placement was preferable in those with a poor prognosis. Temporary stent placement is an option in patients undergoing radiotherapy for inoperable esophageal cancer to increase the dysphagia-free period. Two studies were published on the successful use of silicone-covered plastic stents for sealing of leaks after surgery of the esophagus. The optimal treatment for bleeding varices was confirmed to be endoscopic band ligation. A meta-analysis demonstrated that adding sclerotherapy to band ligation for secondary prophylaxis of bleeding varices had no effect on clinical outcome. In 2005, new techniques for the treatment of complicated strictures were presented. In addition, expanding indications for stents were reported. Finally, endoscopic band ligation was confirmed to be the most optimal technique for the treatment of varices.

Optimizing the positional relationships between instruments used in laparoscopic simulation using a simple trigonometric method.

PubMed

Lorias Espinoza, Daniel; Ordorica Flores, Ricardo; Minor Martínez, Arturo; Gutiérrez Gnecchi, José Antonio

2014-06-01

Various methods for evaluating laparoscopic skill have been reported, but without detailed information on the configuration used they are difficult to reproduce. Here we present a method based on the trigonometric relationships between the instruments used in a laparoscopic training platform in order to provide a tool to aid in the reproducible assessment of surgical laparoscopic technique. The positions of the instruments were represented using triangles. Basic trigonometry was used to objectively establish the distances among the working ports RL, the placement of the optical port h', and the placement of the surgical target OT. The optimal configuration of a training platform depends on the selected working angles, the intracorporeal/extracorporeal lengths of the instrument, and the depth of the surgical target. We demonstrate that some distances, angles, and positions of the instruments are inappropriate for satisfactory laparoscopy. By applying basic trigonometric principles we can determine the ideal placement of the working ports and the optics in a simple, precise, and objective way. In addition, because the method is based on parameters known to be important in both the performance and quantitative quality of laparoscopy, the results are generalizable to different training platforms and types of laparoscopic surgery.

Risk factors for technical failure of endoscopic double self-expandable metallic stent placement by partial stent-in-stent method.

PubMed

Kawakubo, Kazumichi; Kawakami, Hiroshi; Toyokawa, Yoshihide; Otani, Koichi; Kuwatani, Masaki; Abe, Yoko; Kawahata, Shuhei; Kubo, Kimitoshi; Kubota, Yoshimasa; Sakamoto, Naoya

2015-01-01

Endoscopic double self-expandable metallic stent (SEMS) placement by the partial stent-in-stent (PSIS) method has been reported to be useful for the management of unresectable hilar malignant biliary obstruction. However, it is technically challenging, and the optimal SEMS for the procedure remains unknown. The aim of this study was to identify the risk factors for technical failure of endoscopic double SEMS placement for unresectable malignant hilar biliary obstruction (MHBO). Between December 2009 and May 2013, 50 consecutive patients with MHBO underwent endoscopic double SEMS placement by the PSIS method. We retrospectively evaluated the rate of successful double SEMS placement and identified the risk factors for technical failure. The technical success rate for double SEMS placement was 82.0% (95% confidence interval [CI]: 69.2-90.2). On univariate analysis, the rate of technical failure was high in patients with metastatic disease and unilateral placement. Multivariate analysis revealed that metastatic disease was a significant risk factor for technical failure (odds ratio: 9.63, 95% CI: 1.11-105.5). The subgroup analysis after double guidewire insertion showed that the rate of technical success was higher in the laser-cut type SEMS with a large mesh and thick delivery system than in the braided type SEMS with a small mesh and thick delivery system. Metastatic disease was a significant risk factor for technical failure of double SEMS placement for unresectable MHBO. The laser-cut type SEMS with a large mesh and thin delivery system might be preferable for the PSIS procedure. © 2014 Japanese Society of Hepato-Biliary-Pancreatic Surgery.

Enhanced nonlinearity interval mapping scheme for high-performance simulation-optimization of watershed-scale BMP placement

NASA Astrophysics Data System (ADS)

Zou, Rui; Riverson, John; Liu, Yong; Murphy, Ryan; Sim, Youn

2015-03-01

Integrated continuous simulation-optimization models can be effective predictors of a process-based responses for cost-benefit optimization of best management practices (BMPs) selection and placement. However, practical application of simulation-optimization model is computationally prohibitive for large-scale systems. This study proposes an enhanced Nonlinearity Interval Mapping Scheme (NIMS) to solve large-scale watershed simulation-optimization problems several orders of magnitude faster than other commonly used algorithms. An efficient interval response coefficient (IRC) derivation method was incorporated into the NIMS framework to overcome a computational bottleneck. The proposed algorithm was evaluated using a case study watershed in the Los Angeles County Flood Control District. Using a continuous simulation watershed/stream-transport model, Loading Simulation Program in C++ (LSPC), three nested in-stream compliance points (CP)—each with multiple Total Maximum Daily Loads (TMDL) targets—were selected to derive optimal treatment levels for each of the 28 subwatersheds, so that the TMDL targets at all the CP were met with the lowest possible BMP implementation cost. Genetic Algorithm (GA) and NIMS were both applied and compared. The results showed that the NIMS took 11 iterations (about 11 min) to complete with the resulting optimal solution having a total cost of 67.2 million, while each of the multiple GA executions took 21-38 days to reach near optimal solutions. The best solution obtained among all the GA executions compared had a minimized cost of 67.7 million—marginally higher, but approximately equal to that of the NIMS solution. The results highlight the utility for decision making in large-scale watershed simulation-optimization formulations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graf, Peter; Dykes, Katherine; Scott, George

The layout of turbines in a wind farm is already a challenging nonlinear, nonconvex, nonlinearly constrained continuous global optimization problem. Here we begin to address the next generation of wind farm optimization problems by adding the complexity that there is more than one turbine type to choose from. The optimization becomes a nonlinear constrained mixed integer problem, which is a very difficult class of problems to solve. Furthermore, this document briefly summarizes the algorithm and code we have developed, the code validation steps we have performed, and the initial results for multi-turbine type and placement optimization (TTP_OPT) we have run.

Genetic algorithm based task reordering to improve the performance of batch scheduled massively parallel scientific applications

DOE PAGES

Sankaran, Ramanan; Angel, Jordan; Brown, W. Michael

2015-04-08

The growth in size of networked high performance computers along with novel accelerator-based node architectures has further emphasized the importance of communication efficiency in high performance computing. The world's largest high performance computers are usually operated as shared user facilities due to the costs of acquisition and operation. Applications are scheduled for execution in a shared environment and are placed on nodes that are not necessarily contiguous on the interconnect. Furthermore, the placement of tasks on the nodes allocated by the scheduler is sub-optimal, leading to performance loss and variability. Here, we investigate the impact of task placement on themore » performance of two massively parallel application codes on the Titan supercomputer, a turbulent combustion flow solver (S3D) and a molecular dynamics code (LAMMPS). Benchmark studies show a significant deviation from ideal weak scaling and variability in performance. The inter-task communication distance was determined to be one of the significant contributors to the performance degradation and variability. A genetic algorithm-based parallel optimization technique was used to optimize the task ordering. This technique provides an improved placement of the tasks on the nodes, taking into account the application's communication topology and the system interconnect topology. As a result, application benchmarks after task reordering through genetic algorithm show a significant improvement in performance and reduction in variability, therefore enabling the applications to achieve better time to solution and scalability on Titan during production.« less

Prognostic benefit of optimum left ventricular lead position in cardiac resynchronization therapy: follow-up of the TARGET Study Cohort (Targeted Left Ventricular Lead Placement to guide Cardiac Resynchronization Therapy).

PubMed

Kydd, Anna C; Khan, Fakhar Z; Watson, William D; Pugh, Peter J; Virdee, Munmohan S; Dutka, David P

2014-06-01

This study was conducted to assess the impact of left ventricular (LV) lead position on longer-term survival after cardiac resynchronization therapy (CRT). An optimal LV lead position in CRT is associated with improved clinical outcome. A strategy of speckle-tracking echocardiography can be used to guide the implanter to the site of latest activation and away from segments of low strain amplitude (scar). Long-term, prospective survival data according to LV lead position in CRT are limited. Data from a follow-up registry of 250 consecutive patients receiving CRT between June 2008 and July 2010 were studied. The study population comprised patients recruited to the derivation group and the subsequent TARGET (Targeted Left Ventricular Lead Placement to guide Cardiac Resynchronization Therapy) randomized, controlled trial. Final LV lead position was described, in relation to the pacing site determined by pre-procedure speckle-tracking echocardiography, as optimal (concordant/adjacent) or suboptimal (remote). All-cause mortality was recorded at follow-up. An optimal LV lead position (n = 202) conferred LV remodeling response superior to that of a suboptimal lead position (change in LV end-systolic volume: -24 ± 15% vs. -12 ± 17% [p < 0.001]; change in ejection fraction: +7 ± 8% vs. +4 ± 7% [p = 0.02]). During long-term follow-up (median: 39 months; range: <1 to 61 months), an optimal LV lead position was associated with improved survival (log-rank p = 0.003). A suboptimal LV lead placement independently predicted all-cause mortality (hazard ratio: 1.8; p = 0.024). An optimal LV lead position at the site of latest mechanical activation, avoiding low strain amplitude (scar), was associated with superior CRT response and improved survival that persisted during follow-up. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Optimal base station placement for wireless sensor networks with successive interference cancellation.

PubMed

Shi, Lei; Zhang, Jianjun; Shi, Yi; Ding, Xu; Wei, Zhenchun

2015-01-14

We consider the base station placement problem for wireless sensor networks with successive interference cancellation (SIC) to improve throughput. We build a mathematical model for SIC. Although this model cannot be solved directly, it enables us to identify a necessary condition for SIC on distances from sensor nodes to the base station. Based on this relationship, we propose to divide the feasible region of the base station into small pieces and choose a point within each piece for base station placement. The point with the largest throughput is identified as the solution. The complexity of this algorithm is polynomial. Simulation results show that this algorithm can achieve about 25% improvement compared with the case that the base station is placed at the center of the network coverage area when using SIC.

Guided Immediate Implant Placement with Wound Closure by Computer-Aided Design/Computer-Assisted Manufacture Sealing Socket Abutment: Case Report.

PubMed

Finelle, Gary; Lee, Sang J

Digital technology has been widely used in the field of implant dentistry. From a surgical standpoint, computer-guided surgery can be utilized to enhance primary implant stability and to improve the precision of implant placement. From a prosthetic standpoint, computer-aided design/computer-assisted manufacture (CAD/CAM) technology has brought about various restorative options, including the fabrication of customized abutments through a virtual design based on computer-guided surgical planning. This case report describes a novel technique combining the use of a three-dimensional (3D) printed surgical template for the immediate placement of an implant, with CAD/CAM technology to optimize hard and soft tissue healing after bone grafting with the use of a socket sealing abutment.

The damper placement problem for large flexible space structures

NASA Technical Reports Server (NTRS)

Kincaid, Rex K.

1992-01-01

The damper placement problem for large flexible space truss structures is formulated as a combinatorial optimization problem. The objective is to determine the p truss members of the structure to replace with active (or passive) dampers so that the modal damping ratio is as large as possible for all significant modes of vibration. Equivalently, given a strain energy matrix with rows indexed on the modes and the columns indexed on the truss members, we seek to find the set of p columns such that the smallest row sum, over the p columns, is maximized. We develop a tabu search heuristic for the damper placement problems on the Controls Structures Interaction (CSI) Phase 1 Evolutionary Model (10 modes and 1507 truss members). The resulting solutions are shown to be of high quality.

Verifying placement of small-bore feeding tubes: electromagnetic device images versus abdominal radiographs.

PubMed

Bryant, Vera; Phang, Jean; Abrams, Kevin

2015-11-01

Clinicians are unsure if radiography is needed to confirm correct positioning of feeding tubes inserted with assistance from an electromagnetic system. To compare radiographic reports of feeding tube placement with images generated by an electromagnetic feeding tube placement device. The medical records of 200 consecutive patients who had feeding tubes inserted with assistance from an electromagnetic feeding tube placement device were reviewed retrospectively. Radiographic reports of tube site were compared with images generated by the device. Radiographic evidence of tube sites was available in 188 cases: 184 tubes were located in portions of the gastrointestinal tract. Ninety of the 188 tubes were situated in the optimal site (distal duodenum or jejunum) radiographically. Images generated by the electromagnetic device were available in 176 cases; of these, 52 tubes appeared to end in the expected left lower quadrant. Tubes shown on radiographs to be in other sites also occasionally appeared to end in the left lower quadrant. Nurses using the device did not recognize 4 of the 188 tubes (2.1%) that were inadvertently placed in the lung. No consistent pattern of quadrant distribution was found for tubes positioned in the stomach or proximal duodenum. Images generated by the electromagnetic tube placement device provided inconsistent results regarding tube location. A small percentage of seriously malpositioned tubes were not detected by using the electromagnetic device. These findings do not support eliminating radiographs to confirm correct tube placement following use of an electromagnetic tube placement device. ©2015 American Association of Critical-Care Nurses.

Efficient full-chip SRAF placement using machine learning for best accuracy and improved consistency

NASA Astrophysics Data System (ADS)

Wang, Shibing; Baron, Stanislas; Kachwala, Nishrin; Kallingal, Chidam; Sun, Dezheng; Shu, Vincent; Fong, Weichun; Li, Zero; Elsaid, Ahmad; Gao, Jin-Wei; Su, Jing; Ser, Jung-Hoon; Zhang, Quan; Chen, Been-Der; Howell, Rafael; Hsu, Stephen; Luo, Larry; Zou, Yi; Zhang, Gary; Lu, Yen-Wen; Cao, Yu

2018-03-01

Various computational approaches from rule-based to model-based methods exist to place Sub-Resolution Assist Features (SRAF) in order to increase process window for lithography. Each method has its advantages and drawbacks, and typically requires the user to make a trade-off between time of development, accuracy, consistency and cycle time. Rule-based methods, used since the 90 nm node, require long development time and struggle to achieve good process window performance for complex patterns. Heuristically driven, their development is often iterative and involves significant engineering time from multiple disciplines (Litho, OPC and DTCO). Model-based approaches have been widely adopted since the 20 nm node. While the development of model-driven placement methods is relatively straightforward, they often become computationally expensive when high accuracy is required. Furthermore these methods tend to yield less consistent SRAFs due to the nature of the approach: they rely on a model which is sensitive to the pattern placement on the native simulation grid, and can be impacted by such related grid dependency effects. Those undesirable effects tend to become stronger when more iterations or complexity are needed in the algorithm to achieve required accuracy. ASML Brion has developed a new SRAF placement technique on the Tachyon platform that is assisted by machine learning and significantly improves the accuracy of full chip SRAF placement while keeping consistency and runtime under control. A Deep Convolutional Neural Network (DCNN) is trained using the target wafer layout and corresponding Continuous Transmission Mask (CTM) images. These CTM images have been fully optimized using the Tachyon inverse mask optimization engine. The neural network generated SRAF guidance map is then used to place SRAF on full-chip. This is different from our existing full-chip MB-SRAF approach which utilizes a SRAF guidance map (SGM) of mask sensitivity to improve the contrast of optical image at the target pattern edges. In this paper, we demonstrate that machine learning assisted SRAF placement can achieve a superior process window compared to the SGM model-based SRAF method, while keeping the full-chip runtime affordable, and maintain consistency of SRAF placement . We describe the current status of this machine learning assisted SRAF technique and demonstrate its application to full chip mask synthesis and discuss how it can extend the computational lithography roadmap.

Comparative study of navigated versus freehand osteochondral graft transplantation of the knee.

PubMed

Koulalis, Dimitrios; Di Benedetto, Paolo; Citak, Mustafa; O'Loughlin, Padhraig; Pearle, Andrew D; Kendoff, Daniel O

2009-04-01

Osteochondral lesions are a common sports-related injury for which osteochondral grafting, including mosaicplasty, is an established treatment. Computer navigation has been gaining popularity in orthopaedic surgery to improve accuracy and precision. Navigation improves angle and depth matching during harvest and placement of osteochondral grafts compared with conventional freehand open technique. Controlled laboratory study. Three cadaveric knees were used. Reference markers were attached to the femur, tibia, and donor/recipient site guides. Fifteen osteochondral grafts were harvested and inserted into recipient sites with computer navigation, and 15 similar grafts were inserted freehand. The angles of graft removal and placement as well as surface congruity (graft depth) were calculated for each surgical group. The mean harvesting angle at the donor site using navigation was 4 degrees (standard deviation, 2.3 degrees ; range, 1 degrees -9 degrees ) versus 12 degrees (standard deviation, 5.5 degrees ; range, 5 degrees -24 degrees ) using freehand technique (P < .0001). The recipient plug removal angle using the navigated technique was 3.3 degrees (standard deviation, 2.1 degrees ; range, 0 degrees -9 degrees ) versus 10.7 degrees (standard deviation, 4.9 degrees ; range, 2 degrees -17 degrees ) in freehand (P < .0001). The mean navigated recipient plug placement angle was 3.6 degrees (standard deviation, 2.0 degrees ; range, 1 degrees -9 degrees ) versus 10.6 degrees (standard deviation, 4.4 degrees ; range, 3 degrees -17 degrees ) with freehand technique (P = .0001). The mean height of plug protrusion under navigation was 0.3 mm (standard deviation, 0.2 mm; range, 0-0.6 mm) versus 0.5 mm (standard deviation, 0.3 mm; range, 0.2-1.1 mm) using a freehand technique (P = .0034). Significantly greater accuracy and precision were observed in harvesting and placement of the osteochondral grafts in the navigated procedures. Clinical studies are needed to establish a benefit in vivo. Improvement in the osteochondral harvest and placement is desirable to optimize clinical outcomes. Navigation shows great potential to improve both harvest and placement precision and accuracy, thus optimizing ultimate surface congruity.

Depletion of tyrosyl DNA phosphodiesterase 2 activity enhances etoposide-mediated double-strand break formation and cell killing.

PubMed

Kont, Yasemin Saygideger; Dutta, Arijit; Mallisetty, Apurva; Mathew, Jeena; Minas, Tsion; Kraus, Christina; Dhopeshwarkar, Priyanka; Kallakury, Bhaskar; Mitra, Sankar; Üren, Aykut; Adhikari, Sanjay

2016-07-01

DNA topoisomerase 2 (Top2) poisons, including common anticancer drugs etoposide and doxorubicin kill cancer cells by stabilizing covalent Top2-tyrosyl-DNA 5'-phosphodiester adducts and DNA double-strand breaks (DSBs). Proteolytic degradation of the covalently attached Top2 leaves a 5'-tyrosylated blocked termini which is removed by tyrosyl DNA phosphodiesterase 2 (TDP2), prior to DSB repair through non-homologous end joining (NHEJ). Thus, TDP2 confers resistance of tumor cells to Top2-poisons by repairing such covalent DNA-protein adducts, and its pharmacological inhibition could enhance the efficacy of Top2-poisons. We discovered NSC111041, a selective inhibitor of TDP2, by optimizing a high throughput screening (HTS) assay for TDP2's 5'-tyrosyl phosphodiesterase activity and subsequent validation studies. We found that NSC111041 inhibits TDP2's binding to DNA without getting intercalated into DNA and enhanced etoposide's cytotoxicity synergistically in TDP2-expressing cells but not in TDP2 depleted cells. Furthermore, NSC111041 enhanced formation of etoposide-induced γ-H2AX foci presumably by affecting DSB repair. Immuno-histochemical analysis showed higher TDP2 expression in a sub-set of different type of tumor tissues. These findings underscore the feasibility of clinical use of suitable TDP2 inhibitors in adjuvant therapy with Top2-poisons for a sub-set of cancer patients with high TDP2 expression. Copyright © 2016 Elsevier B.V. All rights reserved.

Sentient Structures: Optimising Sensor Layouts for Direct Measurement of Discrete Variables

DTIC Science & Technology

2008-11-01

1 Sentient Structures Optimising Sensor Layouts for Direct Measurement of Discrete Variables Report to US Air Force...TITLE AND SUBTITLE Sentient Structures 5a. CONTRACT NUMBER FA48690714045 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Donald Price...optimal sensor placements is an important requirement for the development of sentient structures. An optimal sensor layout is attained when a limited

Singular vector-based targeted observations of chemical constituents: description and first application of the EURAD-IM-SVA v1.0

NASA Astrophysics Data System (ADS)

Goris, N.; Elbern, H.

2015-12-01

Measurements of the large-dimensional chemical state of the atmosphere provide only sparse snapshots of the state of the system due to their typically insufficient temporal and spatial density. In order to optimize the measurement configurations despite those limitations, the present work describes the identification of sensitive states of the chemical system as optimal target areas for adaptive observations. For this purpose, the technique of singular vector analysis (SVA), which has proven effective for targeted observations in numerical weather prediction, is implemented in the EURAD-IM (EURopean Air pollution and Dispersion - Inverse Model) chemical transport model, yielding the EURAD-IM-SVA v1.0. Besides initial values, emissions are investigated as critical simulation controlling targeting variables. For both variants, singular vectors are applied to determine the optimal placement for observations and moreover to quantify which chemical compounds have to be observed with preference. Based on measurements of the airship based ZEPTER-2 campaign, the EURAD-IM-SVA v1.0 has been evaluated by conducting a comprehensive set of model runs involving different initial states and simulation lengths. For the sake of brevity, we concentrate our attention on the following chemical compounds, O3, NO, NO2, HCHO, CO, HONO, and OH, and focus on their influence on selected O3 profiles. Our analysis shows that the optimal placement for observations of chemical species is not entirely determined by mere transport and mixing processes. Rather, a combination of initial chemical concentrations, chemical conversions, and meteorological processes determines the influence of chemical compounds and regions. We furthermore demonstrate that the optimal placement of observations of emission strengths is highly dependent on the location of emission sources and that the benefit of including emissions as target variables outperforms the value of initial value optimization with growing simulation length. The obtained results confirm the benefit of considering both initial values and emission strengths as target variables and of applying the EURAD-IM-SVA v1.0 for measurement decision guidance with respect to chemical compounds.

A two-phase investment model for optimal allocation of phasor measurement units considering transmission switching

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mousavian, Seyedamirabbas; Valenzuela, Jorge; Wang, Jianhui

2015-02-01

Ensuring the reliability of an electrical power system requires a wide-area monitoring and full observability of the state variables. Phasor measurement units (PMUs) collect in real time synchronized phasors of voltages and currents which are used for the observability of the power grid. Due to the considerable cost of installing PMUs, it is not possible to equip all buses with PMUs. In this paper, we propose an integer linear programming model to determine the optimal PMU placement plan in two investment phases. In the first phase, PMUs are installed to achieve full observability of the power grid whereas additional PMUsmore » are installed in the second phase to guarantee the N - 1 observability of the power grid. The proposed model also accounts for transmission switching and single contingencies such as failure of a PMU or a transmission line. Results are provided on several IEEE test systems which show that our proposed approach is a promising enhancement to the methods available for the optimal placement of PMUs.« less

Optimal Sparse Upstream Sensor Placement for Hydrokinetic Turbines

NASA Astrophysics Data System (ADS)

Cavagnaro, Robert; Strom, Benjamin; Ross, Hannah; Hill, Craig; Polagye, Brian

2016-11-01

Accurate measurement of the flow field incident upon a hydrokinetic turbine is critical for performance evaluation during testing and setting boundary conditions in simulation. Additionally, turbine controllers may leverage real-time flow measurements. Particle image velocimetry (PIV) is capable of rendering a flow field over a wide spatial domain in a controlled, laboratory environment. However, PIV's lack of suitability for natural marine environments, high cost, and intensive post-processing diminish its potential for control applications. Conversely, sensors such as acoustic Doppler velocimeters (ADVs), are designed for field deployment and real-time measurement, but over a small spatial domain. Sparsity-promoting regression analysis such as LASSO is utilized to improve the efficacy of point measurements for real-time applications by determining optimal spatial placement for a small number of ADVs using a training set of PIV velocity fields and turbine data. The study is conducted in a flume (0.8 m2 cross-sectional area, 1 m/s flow) with laboratory-scale axial and cross-flow turbines. Predicted turbine performance utilizing the optimal sparse sensor network and associated regression model is compared to actual performance with corresponding PIV measurements.

Dry Ribbon for Heated Head Automated Fiber Placement

NASA Technical Reports Server (NTRS)

Hulcher, A. Bruce; Marchello, Joseph M.; Hinkley, Jeffrey A.; Johnston, Norman J.; Lamontia, Mark A.

2000-01-01

Ply-by-ply in situ processes involving automated heated head deposition are being developed for fabrication of high performance, high temperature composite structures from low volatile content polymer matrices. This technology requires (1) dry carbon fiber towpreg, (2) consolidation of towpreg to quality, placement-grade unidirectional ribbon or tape, and (3) rapid, in situ, accurate, ply-by-ply robotic placement and consolidation of this material to fabricate a composite structure. In this study, the physical properties of a candidate thermoplastic ribbon, PIXA/IM7, were evaluated and screened for suitability in robotic placement. Specifically, towpreg was prepared from PIXA powder. Various conditions (temperatures) were used to convert the powder-coated towpreg to ribbons with varying degrees of processability. Ribbon within preset specifications was fabricated at 3 temperatures: 390, 400 and 410 C. Ribbon was also produced out-of-spec by purposely overheating the material to a processing temperature of 450 C. Automated placement equipment at Cincinnati Milacron and NASA Langley was used to fabricate laminates from these experimental ribbons. Ribbons were placed at 405 and 450 C by both sets of equipment. Double cantilever beam and wedge peel tests were used to determine the quality of the laminates and, especially, the interlaminar bond formed during the placement process. Ribbon made under conditions expected to be non-optimal (overheated) resulted in poor placeability and composites with weak interlaminar bond strengths, regardless of placement conditions. Ribbon made under conditions expected to be ideal showed good processability and produced well-consolidated laminates. Results were consistent from machine to machine and demonstrated the importance of ribbon quality in heated-head placement of dry material forms. Preliminary screening criteria for the development and evaluation of ribbon from new matrix materials were validated.

Fluctuations in the emotional intelligence of therapy students during clinical placements: Implication for educators, supervisors, and students.

PubMed

Gribble, Nigel; Ladyshewsky, Richard K; Parsons, Richard

2017-01-01

This study investigated the changes in emotional intelligence (EI) of occupational therapy, physiotherapy, and speech pathology students (therapy students). Clinical placements have multiple benefits including the development of interprofessional skills, enhancing practice skills and interpersonal skills. Higher EI competencies have been shown to have a positive impact on patient outcomes, teamwork skills, dealing with stress, and patient satisfaction. Data for this study were collected at two time points: before third-year therapy students commenced extended clinical placements (T1 with 261 students) and approximately 7 months later after students had completed one or more clinical placements (T2 with 109 students). EI was measured using the Emotional Quotient Inventory 2.0 (EQ-i 2.0 ). Only one EI score, assertiveness, demonstrated a significant decline. No EI score showed a significant increase. A third or more of the students showed increases of five points or more in self-actualisation, emotional expression, independence, reality testing and optimism. However, of concern were the five EI scores where therapy students' EI scores decreased by more than five points: assertiveness (where 38% of students declined), problem solving (37%), impulse control (35%), self-actualisation (35%), and stress tolerance (33%). With EI scores declining for some students during clinical placements, there are implications for clinical supervisors and interprofessional facilitators as clinical performance may decline concurrently. There is a range of potential reasons that clinical placements could negatively influence the EI competencies of a therapy student, including poor clinical supervision, conflict between a student, and supervisor and failing a clinical placement. The research suggests that interprofessional facilitators and university educators might consider students undertaking EI tests before clinical placements.

Using a computational model to quantify the potential impact of changing the placement of healthy beverages in stores as an intervention to "Nudge" adolescent behavior choice.

PubMed

Wong, Michelle S; Nau, Claudia; Kharmats, Anna Yevgenyevna; Vedovato, Gabriela Milhassi; Cheskin, Lawrence J; Gittelsohn, Joel; Lee, Bruce Y

2015-12-23

Product placement influences consumer choices in retail stores. While sugar sweetened beverage (SSB) manufacturers expend considerable effort and resources to determine how product placement may increase SSB purchases, the information is proprietary and not available to the public health and research community. This study aims to quantify the effect of non-SSB product placement in corner stores on adolescent beverage purchasing behavior. Corner stores are small privately owned retail stores that are important beverage providers in low-income neighborhoods--where adolescents have higher rates of obesity. Using data from a community-based survey in Baltimore and parameters from the marketing literature, we developed a decision-analytic model to simulate and quantify how placement of healthy beverage (placement in beverage cooler closest to entrance, distance from back of the store, and vertical placement within each cooler) affects the probability of adolescents purchasing non-SSBs. In our simulation, non-SSB purchases were 2.8 times higher when placed in the "optimal location"--on the second or third shelves of the front cooler--compared to the worst location on the bottom shelf of the cooler farthest from the entrance. Based on our model results and survey data, we project that moving non-SSBs from the worst to the optional location would result in approximately 5.2 million more non-SSBs purchased by Baltimore adolescents annually. Our study is the first to quantify the potential impact of changing placement of beverages in corner stores. Our findings suggest that this could be a low-cost, yet impactful strategy to nudge this population--highly susceptible to obesity--towards healthier beverage decisions.

Optimal Use of Hyperbaric Oxygen Therapy in Military Medical Setting (Utilisation optimale de loxygnothrapie hyperbare dans le contexte militaire)

DTIC Science & Technology

2016-02-01

cardiac rhythm abnormalities [115]. The central nervous system is particularly sensitive to the toxic effects of CO poisoning. While petechial hemorrhage...low grade fever , bronzing of the skin, bullae formation, obtunded sensation [164]. A.10.1.1 Benefit of HBO There are only a few studies as to the

Computer-Aided Lead Optimization: Improved Small-Molecule Inhibitor of the Zinc Endopeptidase of Botulinum Neurotoxin Serotype A

DTIC Science & Technology

2007-08-01

doi:10.1371/journal.pone.0000761.s004 (1.33 MB TIF) ACKNOWLEDGMENTS The authors thank Steve Whiting and Seth Swaii for their assistance in preparing...clinical and epidemiologic review. Ann Intern Med 129: 221–228. 2. Kessler KR, Benecke R (1997) Botulinum toxin—from poison to remedy. Neurotoxicology 18

Synthesis and characterization of catalysts and electrocatalysts using combinatorial methods

NASA Astrophysics Data System (ADS)

Ramanathan, Ramnarayanan

This thesis documents attempts at solving three problems. Bead-based parallel synthetic and screening methods based on matrix algorithms were developed. The method was applied to search for new heterogeneous catalysts for dehydrogenation of methylcyclohexane. The most powerful use of the method to date was to optimize metal adsorption and evaluate catalysts as a function of incident energy, likely to be important in the future, should availability of energy be an optimization parameter. This work also highlighted the importance of order of addition of metal salts on catalytic activity and a portion of this work resulted in a patent with UOP LLC, Desplaines, Illinois. Combinatorial methods were also investigated as a tool to search for carbon-monoxide tolerant anode electrocatalysts and methanol tolerant cathode electrocatalysts, resulting in discovery of no new electrocatalysts. A physically intuitive scaling criterion was developed to analyze all experiments on electrocatalysts, providing insight for future experiments. We attempted to solve the CO poisoning problem in polymer electrolyte fuel cells using carbon molecular sieves as a separator. This approach was unsuccessful in solving the CO poisoning problem, possibly due to the tendency of the carbon molecular sieves to concentrate CO and CO 2 in pore walls.

Implementation impacts : volume 2, summer 2013.

DOT National Transportation Integrated Search

2013-01-01

Summary of research projects at the Louisiana Transportation Research Center. Projects in this issue include: : LTRC Project No. 06-4B, Optimization of Tack Coat for HMA Placement; : LTRC Project No. 10-2GT, : Geotechnical Information Database, Phase...

Image-guided optimization of the ECG trace in cardiac MRI.

PubMed

Barnwell, James D; Klein, J Larry; Stallings, Cliff; Sturm, Amanda; Gillespie, Michael; Fine, Jason; Hyslop, W Brian

2012-03-01

Improper electrocardiogram (ECG) lead placement resulting in suboptimal gating may lead to reduced image quality in cardiac magnetic resonance imaging (CMR). A patientspecific systematic technique for rapid optimization of lead placement may improve CMR image quality. A rapid 3 dimensional image of the thorax was used to guide the realignment of ECG leads relative to the cardiac axis of the patient in forty consecutive adult patients. Using our novel approach and consensus reading of pre- and post-correction ECG traces, seventy-three percent of patients had a qualitative improvement in their ECG tracings, and no patient had a decrease in quality of their ECG tracing following the correction technique. Statistically significant improvement was observed independent of gender, body mass index, and cardiac rhythm. This technique provides an efficient option to improve the quality of the ECG tracing in patients who have a poor quality ECG with standard techniques.

Multi-projector auto-calibration and placement optimization for non-planar surfaces

NASA Astrophysics Data System (ADS)

Li, Dong; Xie, Jinghui; Zhao, Lu; Zhou, Lijing; Weng, Dongdong

2015-10-01

Non-planar projection has been widely applied in virtual reality and digital entertainment and exhibitions because of its flexible layout and immersive display effects. Compared with planar projection, a non-planar projection is more difficult to achieve because projector calibration and image distortion correction are difficult processes. This paper uses a cylindrical screen as an example to present a new method for automatically calibrating a multi-projector system in a non-planar environment without using 3D reconstruction. This method corrects the geometric calibration error caused by the screen's manufactured imperfections, such as an undulating surface or a slant in the vertical plane. In addition, based on actual projection demand, this paper presents the overall performance evaluation criteria for the multi-projector system. According to these criteria, we determined the optimal placement for the projectors. This method also extends to surfaces that can be parameterized, such as spheres, ellipsoids, and paraboloids, and demonstrates a broad applicability.

Advantages and disadvantages of surgical placement of PD catheters with regard to other methods.

PubMed

Stegmayr, B

2006-01-01

Peritoneal dialysis is underused for various reasons. One reason may be problems with insertion of catheters for access. Another reason is the delayed start (break-in period) of about 2 weeks after operation. This review describes various approaches to the insertion of a peritoneal dialysis catheter. The optimal conditions to strive for are given as is an overview of various techniques. This article favours surgical placement while others might prefer other techniques. Described is the use a 3-purse string suture technique that allows immediate start of dialysis after catheter insertion both for acute dialysis indications as well as for acute start in chronic dialysis patients. A key to lesser complications is to establish a team devoted to the insertions rather than to allow various physicians to perform insertions as a training procedure. An optimal access is one of the important life lines for these patients.

Peritoneal dialysis catheter implantation: avoiding problems and optimizing outcomes.

PubMed

Crabtree, John H

2015-01-01

The success of peritoneal dialysis (PD) as renal replacement therapy is dependent upon the patient having a functional long-term peritoneal access. There are a number of identified best practices that must be adhered to during PD catheter placement to achieve a durable and infection-resistant access. The clinical setting, available resources, and the employed catheter insertion method may not always permit complete adherence to these practices; however, an attempt should be made to comply with them as closely as possible. Although omission of any one of the practices can lead to catheter loss, departures from some are committed more frequently, manifesting as commonly occurring clinical problems, such as drain pain, catheter tip migration, omental entrapment, pericatheter leaks and hernias, and poor exit-site location. Understanding the technical pitfalls in PD catheter placement that lead to these problems, enable the provider to modify practice habits to avoid them and optimize outcomes. © 2014 Wiley Periodicals, Inc.

Endoscopic-Assisted Burr Hole Reservoir and Ventricle Catheter Placement.

PubMed

Antes, Sebastian; Tschan, Christoph A; Heckelmann, Michael; Salah, Mohamed; Senger, Sebastian; Linsler, Stefan; Oertel, Joachim

2017-05-01

Accurate positioning of a ventricle catheter is of utmost importance. Various techniques to ensure optimal positioning have been described. Commonly, after catheter placement, additional manipulation is necessary to connect a burr hole reservoir or shunt components. This manipulation can lead to accidental catheter dislocation and should be avoided. Here, we present a new technique that allows direct endoscopic insertion of a burr hole reservoir with an already mounted ventricle catheter. Before insertion, the ventricle catheter was slit at the tip, shortened to the correct length, and connected to the special burr hole reservoir. An intracatheter endoscope was then advanced through the reservoir and the connected catheter. This assemblage allowed using the endoscope as a stylet for shielded ventricular puncture. To confirm correct placement of the ventricle catheter, the endoscope was protruded a few millimeters beyond the catheter tip for inspection. The new technique was applied in 12 procedures. The modified burr hole reservoir was inserted for first-time ventriculoperitoneal shunting (n = 1), cerebrospinal fluid withdrawals and drug administration (n = 2), or different stenting procedures (n = 9). Optimal positioning of the catheter was achieved in 11 of 12 cases. No subcutaneous cerebrospinal fluid collection or fluid leakage through the wound occurred. No parenchymal damage or bleeding appeared. The use of the intracatheter endoscope combined with the modified burr hole reservoir provides a sufficient technique for accurate and safe placement. Connecting the ventricle catheter to the reservoir before the insertion reduces later manipulation and accidental dislocation of the catheter. Copyright © 2017 Elsevier Inc. All rights reserved.

From non-preemptive to preemptive scheduling using synchronization synthesis.

PubMed

Černý, Pavol; Clarke, Edmund M; Henzinger, Thomas A; Radhakrishna, Arjun; Ryzhyk, Leonid; Samanta, Roopsha; Tarrach, Thorsten

2017-01-01

We present a computer-aided programming approach to concurrency. The approach allows programmers to program assuming a friendly, non-preemptive scheduler, and our synthesis procedure inserts synchronization to ensure that the final program works even with a preemptive scheduler. The correctness specification is implicit, inferred from the non-preemptive behavior. Let us consider sequences of calls that the program makes to an external interface. The specification requires that any such sequence produced under a preemptive scheduler should be included in the set of sequences produced under a non-preemptive scheduler. We guarantee that our synthesis does not introduce deadlocks and that the synchronization inserted is optimal w.r.t. a given objective function. The solution is based on a finitary abstraction, an algorithm for bounded language inclusion modulo an independence relation, and generation of a set of global constraints over synchronization placements. Each model of the global constraints set corresponds to a correctness-ensuring synchronization placement. The placement that is optimal w.r.t. the given objective function is chosen as the synchronization solution. We apply the approach to device-driver programming, where the driver threads call the software interface of the device and the API provided by the operating system. Our experiments demonstrate that our synthesis method is precise and efficient. The implicit specification helped us find one concurrency bug previously missed when model-checking using an explicit, user-provided specification. We implemented objective functions for coarse-grained and fine-grained locking and observed that different synchronization placements are produced for our experiments, favoring a minimal number of synchronization operations or maximum concurrency, respectively.

[Analysis of characteristics of acute poisoning caused by various poisons in Guangxi, China].

PubMed

Hu, De-hong; Zhang, Zhen-ming; Liu, Qing-hua; Jiang, Dong-fang

2013-11-01

To investigate the characteristics of acute poisonings caused by various poisons in Guangxi, China. A retrospective investigation was performed in 5859 cases of acute poisonings who were admitted to 63 hospitals in 11 cities, as well as 531 types of poisons involved. The poisons were categorized into 6 groups; each group of cases was stratified by the rural or urban settings, frequency of poisoning, and cause of poisoning to analyze the numbers of cases and constituent ratios. Most types of poisons (68.74%) belonged to drugs (217 types) and pesticides (148 types). Most cases of poisonings (61.63%) were caused by pesticides (n = 2547) and chemicals (n = 1064). Pesticides, poisons of plant origins, and poisons of animal origins were responsible for most of the cases in rural settings; 88.46%, 79.10%, and 66.74% of the cases of these poison categories happened in rural settings. Chemicals, drugs, and other poisons were responsible for most of the cases in urban settings; 70.20%, 61.74%, and 63.73% of the cases of these poison categories happened in urban settings. The numbers of cases in 5-year-poisoning groups were the highest in all categories of poisons, accounting for 85.24%, 88.57%, 55.16%, 70.79%, 68.36%, and 66.44%of cases of respective categories. Most cases of poisonings by chemicals, poisons of animal origin, and other poisons were accident-related (86.24%, 72.66%, and 46.71%of the poison categories). Most cases of poisonings by pesticides and drugs were suicide-related (59.39% and 33.52% of the poison categories). Most cases by poisons of plant origin were caused by accidental ingestion (70.36% of the poison category). Most of the acute poisonings in Guangxi area are caused by pesticides and chemicals; the most common causes of poisoning are accidents, accidental ingestion, and suicide. There are significant differences in the causes of acute poisonings between the urban and rural settings.

Optimal Base Station Placement for Wireless Sensor Networks with Successive Interference Cancellation

PubMed Central

Shi, Lei; Zhang, Jianjun; Shi, Yi; Ding, Xu; Wei, Zhenchun

2015-01-01

We consider the base station placement problem for wireless sensor networks with successive interference cancellation (SIC) to improve throughput. We build a mathematical model for SIC. Although this model cannot be solved directly, it enables us to identify a necessary condition for SIC on distances from sensor nodes to the base station. Based on this relationship, we propose to divide the feasible region of the base station into small pieces and choose a point within each piece for base station placement. The point with the largest throughput is identified as the solution. The complexity of this algorithm is polynomial. Simulation results show that this algorithm can achieve about 25% improvement compared with the case that the base station is placed at the center of the network coverage area when using SIC. PMID:25594600

Airway stent complications: the role of follow-up bronchoscopy as a surveillance method

PubMed Central

Labaki, Wassim; Yu, Diana H.; Salwen, Benjamin; Gilbert, Christopher; Schneider, Andrea L. C.; Ortiz, Ricardo; Feller-Kopman, David; Arias, Sixto; Yarmus, Lonny

2017-01-01

Background Airway stenting has become an integral part of the therapeutic endoscopic management of obstructive benign and malignant central airway diseases. Despite increased use of airway stents and frequent stent-associated complications, no clear guidelines for surveillance and maintenance exist. This study aim is to elucidate predictive factors associated with development of stent complications, as well as an optimal surveillance period for follow-up bronchoscopy for early detection and possible prevention of stent-associated complications. Methods Retrospective cohort study of all patients who underwent airway stent placements at our institution from April 2010 to December 2013 for benign and malignant airway diseases. Metallic, silicone (straight, Y stent, T-tube) and hybrid stents were included in the study. Stent complications were analyzed at the time of follow-up bronchoscopy performed four to six weeks after initial stent placement or earlier if patients became symptomatic. Results The study included 134 patients of which 147 stents were placed. Follow-up bronchoscopy was performed in 94 patients. Symptomatic status at the time of follow-up bronchoscopy was not associated with stent complications [odds ratio (OR) =1.88; 95% CI: 0.79–4.45; P=0.15]. Patient age, sex, indication for stent placement, and stent location, were not associated with development of complications (all P>0.05). Compared to all other stents, hybrid stents were more likely to migrate (OR =6.60; 95% CI: 2.16–20.2; P=0.001) or obstruct by secretions (OR =2.53; 95% CI: 1.10–5.84; P=0.03). There were no complications associated with surveillance bronchoscopy. Conclusions Surveillance bronchoscopy within 4 to 6 weeks of stent placement may be useful for early detection of complications and their subsequent management, regardless of symptomatic status and indication for stent placement. Prospective multicenter studies are needed to compare optimal surveillance methods and the impact on patient mortality, morbidity and healthcare costs. PMID:29268534

Employment and residential characteristics in relation to automated external defibrillator locations

PubMed Central

Griffis, Heather M.; Band, Roger A; Ruther, Matthew; Harhay, Michael; Asch, David A.; Hershey, John C.; Hill, Shawndra; Nadkarni, Lindsay; Kilaru, Austin; Branas, Charles C.; Shofer, Frances; Nichol, Graham; Becker, Lance B.; Merchant, Raina M.

2015-01-01

Background Survival from out-of-hospital cardiac arrest (OHCA) is generally poor and varies by geography. Variability in automated external defibrillator (AED) locations may be a contributing factor. To inform optimal placement of AEDs, we investigated AED access in a major US city relative to demographic and employment characteristics. Methods and Results This was a retrospective analysis of a Philadelphia AED registry (2,559 total AEDs). The 2010 US Census and the Local Employment Dynamics (LED) database by ZIP code was used. AED access was calculated as the weighted areal percentage of each ZIP code covered by a 400 meter radius around each AED. Of 47 ZIP codes, only 9%(4) were high AED service areas. In 26%(12) of ZIP codes, less than 35% of the area was covered by AED service areas. Higher AED access ZIP codes were more likely to have a moderately populated residential area (p=0.032), higher median household income (p=0.006), and higher paying jobs (p=008). Conclusions The locations of AEDs vary across specific ZIP codes; select residential and employment characteristics explain some variation. Further work on evaluating OHCA locations, AED use and availability, and OHCA outcomes could inform AED placement policies. Optimizing the placement of AEDs through this work may help to increase survival. PMID:26856232

Asphyxia due to laryngeal spasm as a severe complication of awake deep brain stimulation for Parkinson's disease: a case report.

PubMed

von Eckardstein, Kajetan L; Sixel-Döring, Friederike; Kazmaier, Stephan; Trenkwalder, Claudia; Hoover, Jason M; Rohde, Veit

2016-11-08

In accordance with German neurosurgical and neurological consensus recommendations, lead placements for deep brain stimulation (DBS) in patients with Parkinson's disease (PD) are usually performed with the patient awake and in "medication off" state. This allows for optimal lead position adjustment according to the clinical response to intraoperative test stimulation. However, exacerbation of Parkinsonian symptoms after withdrawal of dopaminergic medication may endanger the patient by inducing severe "off" state motor phenomena. In particular, this can be a problem in awake craniotomies utilizing intraoperative airway management and resuscitation. We report the case of a PD patient with progressive orofacial and neck muscle dystonia resulting in laryngeal spasm during DBS lead placement. This led to upper airway compromise and asphyxia, requiring resuscitation. Laryngeal spasms may occur as a rare "off" state motor complication in patients with PD. Other potential causes of intraoperative difficulties breathing include bilateral vocal cord palsy, positional asphyxia, and silent aspiration. In our practice, we have adjusted our medication regimen and now allow patients to receive their standard dopaminergic medication until the morning of surgery. Neurologists and neurosurgeons performing lead placement procedures for PD should be aware of this rare but unsafe condition to most optimized treatment.

Imaging technique for the complete edentulous patient treated conventionally or with mini implant overdenture

PubMed Central

Meleşcanu Imre, M; Preoteasa, E; Țâncu, AM; Preoteasa, CT

2013-01-01

Rationale. The imaging methods are more and more used in the clinical process of modern dentistry. Once the implant based treatment alternatives are nowadays seen as being the standard of care in edentulous patients, these techniques must be integrated in the complete denture treatment. Aim. The study presents some evaluation techniques for the edentulous patient treated by conventional dentures or mini dental implants (mini SKY Bredent) overdentures, using the profile teleradiography. These offer data useful for an optimal positioning of the artificial teeth and the mini dental implants, favoring to obtain an esthetic and functional treatment outcome. We proposed also a method to conceive a simple surgical guide that allows the prosthetically driven implants placement. Material and method. Clinical case reports were made, highlighting the importance of cephalometric evaluation on lateral teleradiographs in complete edentulous patients. A clinical case that gradually reports the surgical guide preparation (Bredent silicon radio opaque), in order to place the mini dental implants in the best prosthetic and anatomic conditions, was presented. Conclusions. The profile teleradiograph is a useful tool for the practitioner. It allows establishing the optimal site for implant placement, in a good relation with the overdenture. The conventional denture can be easily and relatively costless transformed in a surgical guide used during implant placement. PMID:23599828

Middle finger length-based tracheal intubation depth improves the rate of appropriate tube placement in children.

PubMed

Zhou, Qing-he; Xiao, Wang-pin; Zhou, Hong-mei

2015-11-01

It is challenging for anesthetists to determine the optimal tracheal intubation depth in children. We hypothesize that a measure three times the length of the middle finger can be used for predicting tracheal tube depth in children. Eighty-six children (4-14 years of age) were included in this study. After the children were anesthetized, a fiberoptic bronchoscope (FOB) was inserted into the trachea, the lengths from the upper incisor teeth to carina and vocal cords were measured, and a suitably sized cuffed tracheal tube was inserted into the trachea. Age-based and middle finger length-based formulas were used to determine the tracheal intubation depth. All 86 children enrolled were included in this study. Compared with the age-based intubation, the rate of appropriate tube placement was higher for middle finger length-based intubation (88.37% vs 66.28%, P = 0.001). The proximal intubation rate was lower in middle finger length-based intubation (4.65% vs 32.56%, P < 0.001). There was only weak evidence for a difference in the distal intubation rate between the two methods (6.97% vs 1.16%, P = 0.054). The correlation coefficient between middle finger length and optimal tracheal tube depth was larger than that between age and optimal tracheal tube depth (0.883 vs 0.845). Our data indicate that the appropriate tube placement rate can be improved by using three times the middle finger length as the tracheal intubation depth in children. © 2015 John Wiley & Sons Ltd.

A Fire Department Community Health Intervention to Prevent Carbon Monoxide Poisoning Following a Hurricane

PubMed Central

Levy, Matthew; Jenkins, J Lee; Seaman, Kevin

2014-01-01

Portable generators are commonly used during electrical service interruptions that occur following large storms such as hurricanes. Nearly all portable generators use carbon based fuels and produce deadly carbon monoxide gas. Despite universal warnings to operate these generators outside only, the improper placement of generators makes these devices the leading cause of engine related carbon monoxide deaths in the United States. The medical literature reports many cases of Carbon Monoxide (CO) toxicity associated with generator use following hurricanes and other weather events. This paper describes how Howard County, Maryland Fire and Rescue (HCFR) Services implemented a public education program that focused on prevention of Carbon Monoxide poisoning from portable generator use in the wake of events where electrical service interruptions occurred or had the potential to occur. A major challenge faced was communication with those members of the population who were almost completely dependent upon electronic and wireless technologies and were without redundancies. HCFR utilized several tactics to overcome this challenge including helicopter based surveillance and the use of geocoded information from the electrical service provider to identify outage areas. Once outage areas were identified, HCFR personnel conducted a door-to-door canvasing of effected communities, assessing for hazards and distributing information flyers about the dangers of generator use. This effort represents one of the first reported examples of a community-based endeavor by a fire department to provide proactive interventions designed to prevent carbon monoxide illness. PMID:24596660

The optimal location of piezoelectric actuators and sensors for vibration control of plates

NASA Astrophysics Data System (ADS)

Kumar, K. Ramesh; Narayanan, S.

2007-12-01

This paper considers the optimal placement of collocated piezoelectric actuator-sensor pairs on a thin plate using a model-based linear quadratic regulator (LQR) controller. LQR performance is taken as objective for finding the optimal location of sensor-actuator pairs. The problem is formulated using the finite element method (FEM) as multi-input-multi-output (MIMO) model control. The discrete optimal sensor and actuator location problem is formulated in the framework of a zero-one optimization problem. A genetic algorithm (GA) is used to solve the zero-one optimization problem. Different classical control strategies like direct proportional feedback, constant-gain negative velocity feedback and the LQR optimal control scheme are applied to study the control effectiveness.

Spatial optimization of watershed management practices for nitrogen load reduction using a modeling-optimization framework.

PubMed

Yang, Guoxiang; Best, Elly P H

2015-09-15

Best management practices (BMPs) can be used effectively to reduce nutrient loads transported from non-point sources to receiving water bodies. However, methodologies of BMP selection and placement in a cost-effective way are needed to assist watershed management planners and stakeholders. We developed a novel modeling-optimization framework that can be used to find cost-effective solutions of BMP placement to attain nutrient load reduction targets. This was accomplished by integrating a GIS-based BMP siting method, a WQM-TMDL-N modeling approach to estimate total nitrogen (TN) loading, and a multi-objective optimization algorithm. Wetland restoration and buffer strip implementation were the two BMP categories used to explore the performance of this framework, both differing greatly in complexity of spatial analysis for site identification. Minimizing TN load and BMP cost were the two objective functions for the optimization process. The performance of this framework was demonstrated in the Tippecanoe River watershed, Indiana, USA. Optimized scenario-based load reduction indicated that the wetland subset selected by the minimum scenario had the greatest N removal efficiency. Buffer strips were more effective for load removal than wetlands. The optimized solutions provided a range of trade-offs between the two objective functions for both BMPs. This framework can be expanded conveniently to a regional scale because the NHDPlus catchment serves as its spatial computational unit. The present study demonstrated the potential of this framework to find cost-effective solutions to meet a water quality target, such as a 20% TN load reduction, under different conditions. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimizing BMP Placement at Watershed-Scale Using SUSTAIN. A presentation

EPA Science Inventory

SUSTAIN is intended to support local and county government engineers/planners, federal/state regulatory reviewers, private consulting engineers, concerned citizens, stakeholders, and academicians in the development of watershed-based management plans. The users are expec...

Automated watershed subdivision for simulations using multi-objective optimization

USDA-ARS?s Scientific Manuscript database

The development of watershed management plans to evaluate placement of conservation practices typically involves application of watershed models. Incorporating spatially variable watershed characteristics into a model often requires subdividing the watershed into small areas to accurately account f...

Optimal Allocation of Restoration Practices Using Indexes for Stream Health

EPA Science Inventory

Methodologies that allocate the placement of agricultural and urban green infrastructure management practices with the intent to achieve both economic and environmental objectives typically use objectives related to individual intermediary environmental outputs, yet guidance is n...

Thoracic irrigation prevents retained hemothorax: A prospective propensity scored analysis.

PubMed

Kugler, Nathan W; Carver, Thomas W; Milia, David; Paul, Jasmeet S

2017-12-01

Thoracic trauma resulting in hemothorax (HTx) is typically managed with thoracostomy tube (TT) placement; however, up to 20% of patients develop retained HTx which may necessitate further intervention for definitive management. Although optimal management of retained HTx has been extensively researched, little is known about prevention of this complication. We hypothesized that thoracic irrigation at the time of TT placement would significantly decrease the rate of retained HTx necessitating secondary intervention. A prospective, comparative study of patients with traumatic HTx who underwent bedside TT placement was conducted. The control group consisted of patients who underwent standard TT placement, whereas the irrigation group underwent standard TT placement with immediate irrigation using 1 L of warmed sterile 0.9% saline. Patients who underwent emergency thoracotomy, those with TTs removed within 24 hours, or those who died within 30 days of discharge were excluded. The primary end point was secondary intervention defined by additional TT placement or operative management for retained HTx. A propensity-matched analysis was performed with scores estimated using a logistic regression model based on age, sex, mechanism of injury, Abbreviated Injury Scale chest score, and TT size. In over a 30-month period, a total of 296 patients underwent TT placement for the management of traumatic HTx. Patients were predominantly male (79.6%) at a median age of 40 years and were evenly split between blunt (48.8%) and penetrating (51.2%) mechanisms. Sixty (20%) patients underwent thoracic irrigation at time of initial TT placement. The secondary intervention rate was significantly lower within the study group (5.6% vs. 21.8%; OR, 0.16; p < 0.001). No significant differences in TT duration, ventilator days, or length of stay were noted between the irrigation and control cohort. Thoracic irrigation at the time of initial TT placement for traumatic HTx significantly reduced the need for secondary intervention for retained HTx. Therapeutic Study, Level III.

Economics of a nest-box program for the conservation of an endangered species: a reappraisal

Treesearch

Daniel A. Spring; Michael Bevers; John O.S. Kennedy; Dan Harley

2001-01-01

An optimization model is developed to identify timing and placement strategies for the installation of nest boxes and the harvesting of timber to meet joint timber–wildlife objectives. Optimal management regimes are determined on the basis of their impacts on the local abundance of a threatened species and net present value (NPV) and are identified for a range of NPV...

Computational design of environmental sensors for the potent opioid fentanyl

DOE PAGES

Bick, Matthew J.; Greisen, Per J.; Morey, Kevin J.; ...

2017-09-19

Here, we describe the computational design of proteins that bind the potent analgesic fentanyl. Our approach employs a fast docking algorithm to find shape complementary ligand placement in protein scaffolds, followed by design of the surrounding residues to optimize binding affinity. Co-crystal structures of the highest affinity binder reveal a highly preorganized binding site, and an overall architecture and ligand placement in close agreement with the design model. We also use the designs to generate plant sensors for fentanyl by coupling ligand binding to design stability. The method should be generally useful for detecting toxic hydrophobic compounds in the environment.

Computational design of environmental sensors for the potent opioid fentanyl

PubMed Central

Morey, Kevin J; Antunes, Mauricio S; La, David; Sankaran, Banumathi; Reymond, Luc; Johnsson, Kai; Medford, June I

2017-01-01

We describe the computational design of proteins that bind the potent analgesic fentanyl. Our approach employs a fast docking algorithm to find shape complementary ligand placement in protein scaffolds, followed by design of the surrounding residues to optimize binding affinity. Co-crystal structures of the highest affinity binder reveal a highly preorganized binding site, and an overall architecture and ligand placement in close agreement with the design model. We use the designs to generate plant sensors for fentanyl by coupling ligand binding to design stability. The method should be generally useful for detecting toxic hydrophobic compounds in the environment. PMID:28925919

Computational design of environmental sensors for the potent opioid fentanyl

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bick, Matthew J.; Greisen, Per J.; Morey, Kevin J.

Here, we describe the computational design of proteins that bind the potent analgesic fentanyl. Our approach employs a fast docking algorithm to find shape complementary ligand placement in protein scaffolds, followed by design of the surrounding residues to optimize binding affinity. Co-crystal structures of the highest affinity binder reveal a highly preorganized binding site, and an overall architecture and ligand placement in close agreement with the design model. We also use the designs to generate plant sensors for fentanyl by coupling ligand binding to design stability. The method should be generally useful for detecting toxic hydrophobic compounds in the environment.

Optimum sensor placement for microphone arrays

NASA Astrophysics Data System (ADS)

Rabinkin, Daniel V.

Microphone arrays can be used for high-quality sound pickup in reverberant and noisy environments. Sound capture using conventional single microphone methods suffers severe degradation under these conditions. The beamforming capabilities of microphone array systems allow highly directional sound capture, providing enhanced signal-to-noise ratio (SNR) when compared to single microphone performance. The overall performance of an array system is governed by its ability to locate and track sound sources and its ability to capture sound from desired spatial volumes. These abilities are strongly affected by the spatial placement of microphone sensors. A method is needed to optimize placement for a specified number of sensors in a given acoustical environment. The objective of the optimization is to obtain the greatest average system SNR for sound capture in the region of interest. A two-step sound source location method is presented. In the first step, time delay of arrival (TDOA) estimates for select microphone pairs are determined using a modified version of the Omologo-Svaizer cross-power spectrum phase expression. In the second step, the TDOA estimates are used in a least-mean-squares gradient descent search algorithm to obtain a location estimate. Statistics for TDOA estimate error as a function of microphone pair/sound source geometry and acoustic environment are gathered from a set of experiments. These statistics are used to model position estimation accuracy for a given array geometry. The effectiveness of sound source capture is also dependent on array geometry and the acoustical environment. Simple beamforming and time delay compensation (TDC) methods provide spatial selectivity but suffer performance degradation in reverberant environments. Matched filter array (MFA) processing can mitigate the effects of reverberation. The shape and gain advantage of the capture region for these techniques is described and shown to be highly influenced by the placement of array sensors. A procedure is developed to evaluate a given array configuration based on the above-mentioned metrics. Constrained placement optimizations are performed that maximize SNR for both TDC and MFA capture methods. Results are compared for various acoustic environments and various enclosure sizes. General guidelines are presented for placement strategy and bandwidth dependence, as they relate to reverberation levels, ambient noise, and enclosure geometry. An overall performance function is described based on these metrics. Performance of the microphone array system is also constrained by the design limitations of the supporting hardware. Two newly developed hardware architectures are presented that support the described algorithms. A low- cost 8-channel system with off-the-shelf componentry was designed and its performance evaluated. A massively parallel 512-channel custom-built system is in development-its capabilities and the rationale for its design are described.

An imperialist competitive algorithm for virtual machine placement in cloud computing

NASA Astrophysics Data System (ADS)

Jamali, Shahram; Malektaji, Sepideh; Analoui, Morteza

2017-05-01

Cloud computing, the recently emerged revolution in IT industry, is empowered by virtualisation technology. In this paradigm, the user's applications run over some virtual machines (VMs). The process of selecting proper physical machines to host these virtual machines is called virtual machine placement. It plays an important role on resource utilisation and power efficiency of cloud computing environment. In this paper, we propose an imperialist competitive-based algorithm for the virtual machine placement problem called ICA-VMPLC. The base optimisation algorithm is chosen to be ICA because of its ease in neighbourhood movement, good convergence rate and suitable terminology. The proposed algorithm investigates search space in a unique manner to efficiently obtain optimal placement solution that simultaneously minimises power consumption and total resource wastage. Its final solution performance is compared with several existing methods such as grouping genetic and ant colony-based algorithms as well as bin packing heuristic. The simulation results show that the proposed method is superior to other tested algorithms in terms of power consumption, resource wastage, CPU usage efficiency and memory usage efficiency.

Wiring economy and volume exclusion determine neuronal placement in the Drosophila brain.

PubMed

Rivera-Alba, Marta; Vitaladevuni, Shiv N; Mishchenko, Yuriy; Mischenko, Yuriy; Lu, Zhiyuan; Takemura, Shin-Ya; Scheffer, Lou; Meinertzhagen, Ian A; Chklovskii, Dmitri B; de Polavieja, Gonzalo G

2011-12-06

Wiring economy has successfully explained the individual placement of neurons in simple nervous systems like that of Caenorhabditis elegans [1-3] and the locations of coarser structures like cortical areas in complex vertebrate brains [4]. However, it remains unclear whether wiring economy can explain the placement of individual neurons in brains larger than that of C. elegans. Indeed, given the greater number of neuronal interconnections in larger brains, simply minimizing the length of connections results in unrealistic configurations, with multiple neurons occupying the same position in space. Avoiding such configurations, or volume exclusion, repels neurons from each other, thus counteracting wiring economy. Here we test whether wiring economy together with volume exclusion can explain the placement of neurons in a module of the Drosophila melanogaster brain known as lamina cartridge [5-13]. We used newly developed techniques for semiautomated reconstruction from serial electron microscopy (EM) [14] to obtain the shapes of neurons, the location of synapses, and the resultant synaptic connectivity. We show that wiring length minimization and volume exclusion together can explain the structure of the lamina microcircuit. Therefore, even in brains larger than that of C. elegans, at least for some circuits, optimization can play an important role in individual neuron placement. Copyright © 2011 Elsevier Ltd. All rights reserved.

Parametric study of sensor placement for vision-based relative navigation system of multiple spacecraft

NASA Astrophysics Data System (ADS)

Jeong, Junho; Kim, Seungkeun; Suk, Jinyoung

2017-12-01

In order to overcome the limited range of GPS-based techniques, vision-based relative navigation methods have recently emerged as alternative approaches for a high Earth orbit (HEO) or deep space missions. Therefore, various vision-based relative navigation systems use for proximity operations between two spacecraft. For the implementation of these systems, a sensor placement problem can occur on the exterior of spacecraft due to its limited space. To deal with the sensor placement, this paper proposes a novel methodology for a vision-based relative navigation based on multiple position sensitive diode (PSD) sensors and multiple infrared beacon modules. For the proposed method, an iterated parametric study is used based on the farthest point optimization (FPO) and a constrained extended Kalman filter (CEKF). Each algorithm is applied to set the location of the sensors and to estimate relative positions and attitudes according to each combination by the PSDs and beacons. After that, scores for the sensor placement are calculated with respect to parameters: the number of the PSDs, number of the beacons, and accuracy of relative estimates. Then, the best scoring candidate is determined for the sensor placement. Moreover, the results of the iterated estimation show that the accuracy improves dramatically, as the number of the PSDs increases from one to three.

[Epidemiological analysis for Quzhou pesticide poisoning of year 2008 to 2010].

PubMed

Zhao, Shi-guang; Liu, Si-feng

2012-09-01

To provide scientific evidence of making measures for prevention of pesticide poisoning, the investigation on the condition of pesticide poisoning was carried out in Quzhou. Registration data of pesticide poisoning from 2008 to 2010 in Quzhou were collected and statistically analyzed by SPSS 12.0. During the three years, there were 1222 cases reported for pesticide poisoning. Among them, the number of occupational poisoning was 225 (1 case died), with fatality rate of 0.44%. The number of non-occupational poisoning was 997 (77 cases died), and its fatality rate was 7.72% . The incidence of occupational poisoning and non-occupational poisoning accounted for 18.4% and 81.6% respectively. Male patients were in the majority in occupational pesticides poisoning (accounting for 76.4%), female patients in non-occupational poisoning (accounting for 52.1%). The pesticide poisoning mainly occurred from July to September. Occupational poisoning and non-occupational poisoning cases mainly concentrated in over 65 age group, accounting for 36.0% (81 cases) and 26.3% (262 cases) respectively. Insecticide ranks the first in the terms of total poisoning cases caused by pesticide, and organophosphate poisoning ranks the first in all insecticides. Pesticides poisoning has badly threatened the public health in Quzhou, attention should be paid to non-occupational poisoning. The pesticides poisoning was mainly caused by organophosphate insecticides.

Epidemiology and characteristics of acute poisoning treated at an emergency center.

PubMed

Chen, Feng; Wen, Jun-Ping; Wang, Xiao-Ping; Lin, Qing-Ming; Lin, Cai-Jing

2010-01-01

Acute poisoning is frequently encountered at emergency department. This study was to investigate the epidemiology and characteristics of patients with acute poisoning who were treated at the Emergency Center, Fujian Provincial Hospital, China. We retrospectively analyzed the gender, age, causes of poisoning, types of poisons, poisoning route, emergency diagnoses, outcomes, and prognoses of these patients. Altogether 2867 patients with acute poisoning were treated from January 2004 to December 2009. The ratio of male to female was 1:1.04, and their average age was 33.8 years. Of the 2867 patients, 76.39% were between 18 and 40 years old. The incidence of acute poisoning was as high as 11.33% in January each year. The incidence of poisoning was in a descending order: alcohol poisoning (54.55%), medication poisoning (25.95%), pesticide poisoning (5.65%), and drug poisoning (4.88%). Most (56.44%) of the patients with drug poisoning were under 25 years and their mean age was significantly lower than that of patients with medication poisoning or alcohol poisoning (P < 0.01). Approximately 69.54% of the patients were followed up after emergency treatment, 30.39% were hospitalized, and four patients died. Acute poisoning is largely alcohol poisoning and medication poisoning in a city. The emergency green channel "pre-hospital emergency care-emergency department-hospital treatment" can significantly improve the survival rate of patients with acute poisoning.

Development of Optimized Guidelines for Therapeutic Strategies for Organophosphate Poisoning

DTIC Science & Technology

2011-03-01

compounds (Cannard, 2006). Pyridostigmine bromide , a pretreatment for a potential soman exposure, is a member of the carbamate family (Cannard, 2006...others, 2005) and later expanded that model to incorporate the nerve agent pretreatment by carbamates such as pyridostigmine (Worek and others, 2007...model developed in 2005 to incorporate pretreatment by a carbamate such as pyridostigmine (Worek and others, 2007). Both sets of researchers show

Photographic fixative poisoning

MedlinePlus

Photographic developer poisoning; Hydroquinone poisoning; Quinone poisoning; Sulfite poisoning ... Poisonous ingredients include: Hydroquinones Quinones Sodium ... fixative can also break down (decompose) to form sulfur dioxide ...

Development of the Animal Management and Husbandry Online Placement Tool.

PubMed

Bates, Lucy; Crowther, Emma; Bell, Catriona; Kinnison, Tierney; Baillie, Sarah

2013-01-01

The workplace provides veterinary students with opportunities to develop a range of skills, making workplace learning an important part of veterinary education in many countries. Good preparation for work placements is vital to maximize learning; to this end, our group has developed a series of three computer-aided learning (CAL) packages to support students. The third of this series is the Animal Management and Husbandry Online Placement Tool (AMH OPT). Students need a sound knowledge of animal husbandry and the ability to handle the common domestic species. However, teaching these skills at university is not always practical and requires considerable resources. In the UK, the Royal College of Veterinary Surgeons (RCVS) requires students to complete 12 weeks of pre-clinical animal management and husbandry work placements or extramural studies (EMS). The aims are for students to improve their animal handling skills and awareness of husbandry systems, develop communication skills, and understand their future clients' needs. The AMH OPT is divided into several sections: Preparation, What to Expect, Working with People, Professionalism, Tips, and Frequently Asked Questions. Three stakeholder groups (university EMS coordinators, placement providers, and students) were consulted initially to guide the content and design and later to evaluate previews. Feedback from stakeholders was used in an iterative design process, resulting in a program that aims to facilitate student preparation, optimize the learning opportunities, and improve the experience for both students and placement providers. The CAL is available online and is open-access worldwide to support students during veterinary school.

Treatment of Intra- and Extracranial Arterial Dissections Using Stents and Embolization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joo, Jin Yang; Ahn, Jung Yong, E-mail: jyahn@cha.ac.kr; Chung, Young Sun

2005-06-15

Purpose. To evaluate the safety and efficacy of stent placement for extracranial and intracranial arterial dissections. Methods. Eighteen patients underwent endovascular treatment of carotid and vertebral dissections using intraluminal stent placement. Five patients with arterial dissection were treated, 2 using one insertion of a single stent and 3 using placement of two stents. Patients with a dissecting aneurysm were treated as follows: 7 patients with insertion of one stent, 4 with placement of two stents, and 2 by stent-assisted Guglielmi detachable coil embolization. In the 18 patients in whom stenting was attempted, the overall success in reaching the target lesionmore » was 94.4%. Of the 17 patients treated with stents, stent release and positioning were considered optimal in 16 (94%) and suboptimal in one (6%). In patients who underwent a successful procedure, all parent arteries were preserved. There were no instances of postprocedural ischemic attacks, new neurologic deficits, or new minor or major strokes prior to patient discharge. In follow up, all patients were assessed, using the modified Rankin scale, as functionally improved or of stable clinical status. The reduction in dissection-induced stenosis or pseudoaneurysm, the patency rate obtained at follow-up, and the lack of strokes (ischemic or hemorrhagic) suggest that stent placement offers a viable alternative to complex surgical bypass or reconstructive procedures. The long-term efficacy and durability of stent placement for arterial dissection remain to be determined in a larger series.« less

[Pidemiological analysis of pesticide poisoning in hangzhou during 2006-2013].

PubMed

Zhang, Lei; Hao, Li; Zhang, Xuhui; Chen, Jianchun; Wang, Qiang; Yu, Long

2015-01-01

The purpose of this current investigation was to describe the distribution characteristics of pesticides poisoning in Hangzhou during 2006-2013. The registration data of pesticide poisoning in Hangzhou during 2006-2013 were collected from health disserve surveillance information system which was part of China information system for disease control and prevention. The statistical analysis method included Pearson Chi-square test and Cochran-Armitage trend test. There were totally 6232 cases with pesticide poisoning during 2006-2013, of which 414 cases died. The fatality rate of poisoning patients was 6.64%. The pesticides, especially organophosphorus pesticides, were the main poison that caused poisoning, and patients with pesticide poisoning accounted for 80.60% of all the poisoning patient. There was more female patients than male patients among non-productive pesticide poisoning, but on the contrary among productive pesticide poisoning. The incidence of pesticides poisoning had significant increase in the third season. Occupational pesticide poisoning and non-occupational pesticide poisoning had the different distribution character. Non-occupational pesticide poisoning was the chief reason of pesticide poisoning. The pesticides, especially organophosphorus pesticides, were the main poisons threatening the health of people in Hangzhou, and the effective prevention and control measures should be taken immediately.

Optimizing power cylinder lubrication on a large bore natural gas engine

NASA Astrophysics Data System (ADS)

Luedeman, Matthew R.

More than 6000 integral compressors, located along America's natural gas pipelines, pump natural gas across the United States. These compressors are powered by 2-stroke, large bore natural gas burning engines. Lowering the operating costs, reducing the emissions, and ensuring that these engines remain compliant with future emission regulations are the drivers for this study. Substantial research has focused on optimizing efficiency and reducing the fuel derived emissions on this class of engine. However, significantly less research has focused on the effect and reduction of lubricating oil derived emissions. This study evaluates the impact of power cylinder lubricating oil on overall engine emissions with an emphasis on reducing oxidation catalyst poisoning. A traditional power cylinder lubricator was analyzed; power cylinder lubricating oil was found to significantly impact exhaust emissions. Lubricating oil was identified as the primary contributor of particulate matter production in a large bore natural gas engine. The particulate matter was determined to be primarily organic carbon, and most likely direct oil carryover of small oil droplets. The particulate matter production equated to 25% of the injected oil at a nominal power cylinder lubrication rate. In addition, power cylinder friction is considered the primary contributor to friction loss in the internal combustion engine. This study investigates the potential for optimizing power cylinder lubrication by controlling power cylinder injection to occur at the optimal time in the piston cycle. By injecting oil directly into the ring pack, it is believed that emissions, catalyst poisoning, friction, and wear can all be reduced. This report outlines the design and theory of two electronically controlled lubrication systems. Experimental results and evaluation of one of the systems is included.

Optimization of Composite Structures with Curved Fiber Trajectories

NASA Astrophysics Data System (ADS)

Lemaire, Etienne; Zein, Samih; Bruyneel, Michael

2014-06-01

This paper studies the problem of optimizing composites shells manufactured using Automated Tape Layup (ATL) or Automated Fiber Placement (AFP) processes. The optimization procedure relies on a new approach to generate equidistant fiber trajectories based on Fast Marching Method. Starting with a (possibly curved) reference fiber direction defined on a (possibly curved) meshed surface, the new method allows determining fibers orientation resulting from a uniform thickness layup. The design variables are the parameters defining the position and the shape of the reference curve which results in very few design variables. Thanks to this efficient parameterization, maximum stiffness optimization numerical applications are proposed. The shape of the design space is discussed, regarding local and global optimal solutions.

Optimization of burnable poison design for Pu incineration in fully fertile free PWR core

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fridman, E.; Shwageraus, E.; Galperin, A.

2006-07-01

The design challenges of the fertile-free based fuel (FFF) can be addressed by careful and elaborate use of burnable poisons (BP). Practical fully FFF core design for PWR reactor has been reported in the past [1]. However, the burnable poison option used in the design resulted in significant end of cycle reactivity penalty due to incomplete BP depletion. Consequently, excessive Pu loading were required to maintain the target fuel cycle length, which in turn decreased the Pu burning efficiency. A systematic evaluation of commercially available BP materials in all configurations currently used in PWRs is the main objective of thismore » work. The BP materials considered are Boron, Gd, Er, and Hf. The BP geometries were based on Wet Annular Burnable Absorber (WABA), Integral Fuel Burnable Absorber (IFBA), and Homogeneous poison/fuel mixtures. Several most promising combinations of BP designs were selected for the full core 3D simulation. All major core performance parameters for the analyzed cases are very close to those of a standard PWR with conventional UO{sub 2} fuel including possibility of reactivity control, power peaking factors, and cycle length. The MTC of all FFF cores was found at the full power conditions at all times and very close to that of the UO{sub 2} core. The Doppler coefficient of the FFF cores is also negative but somewhat lower in magnitude compared to UO{sub 2} core. The soluble boron worth of the FFF cores was calculated to be lower than that of the UO{sub 2} core by about a factor of two, which still allows the core reactivity control with acceptable soluble boron concentrations. The main conclusion of this work is that judicial application of burnable poisons for fertile free fuel has a potential to produce a core design with performance characteristics close to those of the reference PWR core with conventional UO{sub 2} fuel. (authors)« less

Sequential assessment of prey through the use of multiple sensory cues by an eavesdropping bat

NASA Astrophysics Data System (ADS)

Page, Rachel A.; Schnelle, Tanja; Kalko, Elisabeth K. V.; Bunge, Thomas; Bernal, Ximena E.

2012-06-01

Predators are often confronted with a broad diversity of potential prey. They rely on cues associated with prey quality and palatability to optimize their hunting success and to avoid consuming toxic prey. Here, we investigate a predator's ability to assess prey cues during capture, handling, and consumption when confronted with conflicting information about prey quality. We used advertisement calls of a preferred prey item (the túngara frog) to attract fringe-lipped bats, Trachops cirrhosus, then offered palatable, poisonous, and chemically manipulated anurans as prey. Advertisement calls elicited an attack response, but as bats approached, they used additional sensory cues in a sequential manner to update their information about prey size and palatability. While both palatable and poisonous small anurans were readily captured, large poisonous toads were approached but not contacted suggesting the use of echolocation for assessment of prey size at close range. Once prey was captured, bats used chemical cues to make final, post-capture decisions about whether to consume the prey. Bats dropped small, poisonous toads as well as palatable frogs coated in toad toxins either immediately or shortly after capture. Our study suggests that echolocation and chemical cues obtained at close range supplement information obtained from acoustic cues at long range. Updating information about prey quality minimizes the occurrence of costly errors and may be advantageous in tracking temporal and spatial fluctuations of prey and exploiting novel food sources. These findings emphasize the sequential, complex nature of prey assessment that may allow exploratory and flexible hunting behaviors.

Creation of Artificial Landscapes Spatial Systems Optimizing Human Habitat on Southern Coasts of the Russian Far East

NASA Astrophysics Data System (ADS)

Golikov, S. Yu; Petukhov, V. I.; Maiorov, I. S.

2017-11-01

The features of artificial landscapes’ spatial systems created for the optimization of industry facilities and settlements (as well as forest and agricultural crops taking into account the optimality of the existing microclimate and the possibilities for its improvement) are discussed in the paper. They improve the population health (through the optimization of the environment of settlements), the health of farm animals, the state of crops (through optimization of the climate), watercourses and forests reducing catastrophes on the shores and slopes by the proper selection and placement of species for artificial planting. They are achieved by revegetation, greening, garden and landscape design. In general, their purpose is to optimize the human environment.

Carbolic acid poisoning

MedlinePlus

Phenol poisoning; Phenylic acid poisoning; Hydroxybenzene poisoning; Phenic acid poisoning; Benzenol poisoning ... measure and monitor the person's vital signs, including temperature, pulse, breathing rate, and blood pressure. Tests that ...

An educational rationale for deaf students with multiple disabilities.

PubMed

Ewing, Karen M; Jones, Thomas W

2003-01-01

Deaf students with with multiple disabilities have a long history of limited opportunity, including limited access to educational opportunities available to their deaf peers. This article places the individual needs of deaf students with multiple disabilities in the context that guides much of deaf education--the importance of language acquisition. That emphasis provides a basis for placement and curriculum options for deaf students with multiple disabilities. The authors review the evolution of placement options, describe assumptions that should guide placement and curriculum decisions, and recommend practices for optimizing these students' education. Descriptions of three service delivery models--multidisciplinary, interdisciplinary, and transdisciplinary--are provided, as well as an overview of the effectiveness of person-centered planning for deaf students with multiple disabilities. Disability-specific resources are highlighted that relate to mental retardation, autism, visual impairments, learning disabilities, attention deficit hyperactivity disorder, emotional disorders, medical issues, and general resources.

[Analysis of the characteristics of toxins in 6005 cases of acute poisoning in Guangxi].

PubMed

Jiang, Dong-fang; Zhang, Zhen-ming; Hu, De-hong; Liu, Qing-hua

2013-07-01

To investigate the toxin characteristics of toxins in patients of acute poisoning in the Guangxi area. A retrospective study was conducted. The data of acute poisoning cases and the causative toxins collected from 63 hospitals of Guangxi, including 36 city hospitals, 12 county hospitals, and 15 township health centers from January 2005 to December 2009 were collected. The data were descriptively analyzed and classified by year. A total of 6005 cases with acute poisoning induced by 532 kinds of poisons were enrolled. The 532 kinds of toxin were classified by high-occurrence (producing poisoning for 5 continuous years), low-occurrence (leading to poisoning for 2-4 continuous years) and newly occurred categories (leading to poisoning only in 1 year). The numbers of poisons of these 3 categories accounted for 10.15% (54 kinds), 29.70% (158 kinds), 60.15% (320 kinds) of total number of poisons, respectively. There were 4688 (78.07%), 780 (12.99%), and 537 (8.94%) cases for each category respectively. And the poisoning cases of each toxin involved from 8 to 837, 2 to 25, and 1 to 69 cases respectively. 77.78% (42/54) of high-occurrence poisons affect more than 20 cases, and 89.87% (142/158), 98.75% (316/320) of low-occurrence and new-occurrence poisons involved less than 10 cases. In the dynamic analyses for 5 years, frequency of toxin caused by high-occurrence, low-occurrence and newly occurred poisons in 5 years were 5 times, 2.6 times, and 1 time, respectively. The number of poisons caused by the high-occurrence toxin each year were same, but the average-annual growth rates of poison numbers caused by the low-occurrence and new-occurrence poisons each year were 17.61% and 20.10%. The average-annual growth rates of poisoning cases caused by the 3 categories of poisons were 14.08%, 16.53%, 31.96%, and the average-annual growth rates of poisoning cases caused by each categories were 10.28%, 1.13%, 11.45%, respectively. In the high-occurrence category, the poison species was least, the poisoning cases were most, the variety of the affected cases by each poison was largest, and the case involved by each toxin was increased by year. But in the newly occurred category, the poison constituent ratio was largest, but the poisoning population was the least, the disparity of each poison was least, and the toxin increased and the population affected each year were elevated. The characteristics of low-occurrence poison were between high-occurrence poison and newly occurred poison.

Materials and process optimization for dual-shell satellite antenna reflectors

NASA Astrophysics Data System (ADS)

Balaski, Darcy R.; van Oyen, Hans J.; Nissan, Sorin J.

A comprehensive, design-optimization test program was conducted for satellite antenna reflectors composed of two offset paraboloidal Kevlar-reinforced sandwich shells separated by a circular sandwich structure. In addition to standard mechanical properties testing, coefficient of thermal expansion and hygroscopic tests were conducted to predict reflector surface accuracy in the thermal cycling environment of orbital space. Attention was given to the relative placement of components during assembly, in view of reflector surface measurements.

Optimal loop placement and models for length - based vehicle classification and stop - and - go traffic.

DOT National Transportation Integrated Search

2011-01-01

Inductive loops are widely used nationwide for traffic monitoring as a data source for a variety of : needs in generating traffic information for operation and planning analysis, validations of travel : demand models, freight studies, pavement design...

Evaluation of Effective Factors on Travel Time in Optimization of Bus Stops Placement Using Genetic Algorithm

NASA Astrophysics Data System (ADS)

Bargegol, Iraj; Ghorbanzadeh, Mahyar; Ghasedi, Meisam; Rastbod, Mohammad

2017-10-01

In congested cities, locating and proper designing of bus stops according to the unequal distribution of passengers is crucial issue economically and functionally, since this subject plays an important role in the use of bus system by passengers. Location of bus stops is a complicated subject; by reducing distances between stops, walking time decreases, but the total travel time may increase. In this paper, a specified corridor in the city of Rasht in north of Iran is studied. Firstly, a new formula is presented to calculate the travel time, by which the number of stops and consequently, the travel time can be optimized. An intended corridor with specified number of stops and distances between them is addressed, the related formulas to travel time are created, and its travel time is calculated. Then the corridor is modelled using a meta-heuristic method in order that the placement and the optimal distances of bus stops for that are determined. It was found that alighting and boarding time along with bus capacity are the most effective factors affecting travel time. Consequently, it is better to have more concentration on indicated factors for improving the efficiency of bus system.

[Analysis of 4713 cases of Wuhan pesticide poisoning reports of year 2002 to 2010].

PubMed

Chen, Zhen-long; Li, Song-han; Wang, Ying; Yu, Li; Yi, Gui-lin; Yan, Yan-ling

2011-10-01

To provide scientific evidence of making measures for prevention of pesticide poisoning, the investigation on the condition of pesticides poisoning was carried out in Wuhan. Registration data of pesticide poisoning from 2002 to 2010 in Wuhan were collected and statistically analyzed by SAS 9.1. During the nine years, there were 4713 cases reported for pesticide poisoning. Among them, the number of occupational poisoning was 2737 (2 cases died), with fatality rate of 0.07%. The number of non-occupational poisoning was 1976 (159 cases died), and its fatality rate was 8.05%. The incidence of occupational poisoning and non-occupational poisoning accounted for 58.1% and 41.9%, respectively. Insecticides especially organophosphorus insecticides, such as parathion, dichlorvos, and methamidophos accounted for 70.6% of the poisoning. Occupational poisoning took place mainly in man, accounting for 68.8%, Non-occupational or life poisoning in contrast mainly occurred in women with a proportion of 66.8%. The majority of the occupational poisoning were 30-59 year-old patients (2239 cases, 81.8%). The majority of the non-occupational poisoning were 30-44 year-old patients (665 cases, 33.6%) and - 70 years old patients (209 cases, 10.6%). High incidence of occupational pesticide poisoning, the regional distribution of Caidian (1016 cases, 37.1% ) highest, followed by the Dongxihu, Hannan and Huangpi. The pesticide poisoning mainly occurred from July to September. The occupational poisoning was mainly caused by poor protection, long working hours, and practice not implemented. The non-occupational poisoning was mainly caused by suicide. The majority of the occupational poisoning in Wuhan was middle-aged men. The pesticide poisoning was main caused by insecticides.

Estimation of optimal nasotracheal tube depth in adult patients.

PubMed

Ji, Sung-Mi

2017-12-01

The aim of this study was to estimate the optimal depth of nasotracheal tube placement. We enrolled 110 patients scheduled to undergo oral and maxillofacial surgery, requiring nasotracheal intubation. After intubation, the depth of tube insertion was measured. The neck circumference and distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch were measured. To estimate optimal tube depth, correlation and regression analyses were performed using clinical and anthropometric parameters. The mean tube depth was 28.9 ± 1.3 cm in men (n = 62), and 26.6 ± 1.5 cm in women (n = 48). Tube depth significantly correlated with height (r = 0.735, P < 0.001). Distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch correlated with depth of the endotracheal tube (r = 0.363, r = 0.362, and r = 0.546, P < 0.05). The tube depth also correlated with the sum of these distances (r = 0.646, P < 0.001). We devised the following formula for estimating tube depth: 19.856 + 0.267 × sum of the three distances (R 2 = 0.432, P < 0.001). The optimal tube depth for nasotracheally intubated adult patients correlated with height and sum of the distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch. The proposed equation would be a useful guide to determine optimal nasotracheal tube placement.

Field-Based Optimal Placement of Antennas for Body-Worn Wireless Sensors

PubMed Central

Januszkiewicz, Łukasz; Di Barba, Paolo; Hausman, Sławomir

2016-01-01

We investigate a case of automated energy-budget-aware optimization of the physical position of nodes (sensors) in a Wireless Body Area Network (WBAN). This problem has not been presented in the literature yet, as opposed to antenna and routing optimization, which are relatively well-addressed. In our research, which was inspired by a safety-critical application for firefighters, the sensor network consists of three nodes located on the human body. The nodes communicate over a radio link operating in the 2.4 GHz or 5.8 GHz ISM frequency band. Two sensors have a fixed location: one on the head (earlobe pulse oximetry) and one on the arm (with accelerometers, temperature and humidity sensors, and a GPS receiver), while the position of the third sensor can be adjusted within a predefined region on the wearer’s chest. The path loss between each node pair strongly depends on the location of the nodes and is difficult to predict without performing a full-wave electromagnetic simulation. Our optimization scheme employs evolutionary computing. The novelty of our approach lies not only in the formulation of the problem but also in linking a fully automated optimization procedure with an electromagnetic simulator and a simplified human body model. This combination turns out to be a computationally effective solution, which, depending on the initial placement, has a potential to improve performance of our example sensor network setup by up to about 20 dB with respect to the path loss between selected nodes. PMID:27196911

Protecting Yourself from Poisonous Plants

MedlinePlus

... NIOSH NIOSH Fast Facts: Protecting Yourself from Poisonous Plants Language: English (US) Español (Spanish) Kreyol Haitien (Hatian ... outdoors is at risk of exposure to poisonous plants, such as poison ivy, poison oak, and poison ...

Outsmarting Poison Ivy and Other Poisonous Plants

MedlinePlus

... Consumer Updates Outsmarting Poison Ivy and Other Poisonous Plants Share Tweet Linkedin Pin it More sharing options ... whitish-green fruits hang in loose clusters. Poison Plant Rashes Aren’t Contagious Poison ivy and other ...

Targeted Pressure Management During CO 2 Sequestration: Optimization of Well Placement and Brine Extraction

DOE PAGES

Cihan, Abdullah; Birkholzer, Jens; Bianchi, Marco

2014-12-31

Large-scale pressure increases resulting from carbon dioxide (CO 2) injection in the subsurface can potentially impact caprock integrity, induce reactivation of critically stressed faults, and drive CO 2 or brine through conductive features into shallow groundwater. Pressure management involving the extraction of native fluids from storage formations can be used to minimize pressure increases while maximizing CO2 storage. However, brine extraction requires pumping, transportation, possibly treatment, and disposal of substantial volumes of extracted brackish or saline water, all of which can be technically challenging and expensive. This paper describes a constrained differential evolution (CDE) algorithm for optimal well placement andmore » injection/ extraction control with the goal of minimizing brine extraction while achieving predefined pressure contraints. The CDE methodology was tested for a simple optimization problem whose solution can be partially obtained with a gradient-based optimization methodology. The CDE successfully estimated the true global optimum for both extraction well location and extraction rate, needed for the test problem. A more complex example application of the developed strategy was also presented for a hypothetical CO 2 storage scenario in a heterogeneous reservoir consisting of a critically stressed fault nearby an injection zone. Through the CDE optimization algorithm coupled to a numerical vertically-averaged reservoir model, we successfully estimated optimal rates and locations for CO 2 injection and brine extraction wells while simultaneously satisfying multiple pressure buildup constraints to avoid fault activation and caprock fracturing. The study shows that the CDE methodology is a very promising tool to solve also other optimization problems related to GCS, such as reducing ‘Area of Review’, monitoring design, reducing risk of leakage and increasing storage capacity and trapping.« less

Recognizing the Toxicodendrons (poison ivy, poison oak, and poison sumac).

PubMed

Guin, J D; Gillis, W T; Beaman, J H

1981-01-01

Poison ivy, poison oak, and poison sumac are now classified in the genus Toxicodendron which is readily distinguished from Rhus. In the United States, there are two species of poison oak, Toxicodendron diversilobum (western poison oak) and Toxicodendron toxicarium (eastern poison oak). There are also two species of poison ivy, Toxicodendron rydbergii, a nonclimbing subshrub, and Toxicodendron radicans, which may be either a shrub or a climbing vine. There are nine subspecies of T. radicans, six of which are found in the United States. One species of poison sumac, Toxicodendron vernix, occurs in the United States. Distinguishing features of these plants and characteristics that separate Toxicodendron from Rhus are outlined in the text and illustrated in color plates.

Receptor binding assay for paralytic shellfish poisoning toxins: optimization and interlaboratory comparison.

PubMed

Ruberu, Shryamalie R; Liu, Yun-Gang; Wong, Carolyn T; Perera, S Kusum; Langlois, Gregg W; Doucette, Gregory J; Powell, Christine L

2003-01-01

A receptor binding assay (RBA) for detection of paralytic shellfish poisoning (PSP) toxins was formatted for use in a high throughput detection system using microplate scintillation counting. The RBA technology was transferred from the National Ocean Service, which uses a Wallac TriLux 1450 MicroBeta microplate scintillation counter, to the California Department of Health Services, which uses a Packard TopCount scintillation counter. Due to differences in the detector arrangement between these 2 counters, markedly different counting efficiencies were exhibited, requiring optimization of the RBA protocol for the TopCount instrument. Precision, accuracy, and sensitivity [limit of detection = 0.2 microg saxitoxin (STX) equiv/100 g shellfish tissue] of the modified protocol were equivalent to those of the original protocol. The RBA robustness and adaptability were demonstrated by an interlaboratory study, in which STX concentrations in shellfish generated by the TopCount were consistent with MicroBeta-derived values. Comparison of STX reference standards obtained from the U.S. Food and Drug Administration and the National Research Council, Canada, showed no observable differences. This study confirms the RBA's value as a rapid, high throughput screen prior to testing by the conventional mouse bioassay (MBA) and its suitability for providing an early warning of increasing PSP toxicity when toxin levels are below the MBA limit of detection.

Take me where I want to go: Institutional prestige, advisor sponsorship, and academic career placement preferences.

PubMed

Pinheiro, Diogo L; Melkers, Julia; Newton, Sunni

2017-01-01

Placement in prestigious research institutions for STEM (science, technology, engineering, and mathematics) PhD recipients is generally considered to be optimal. Yet some doctoral recipients are not interested in intensive research careers and instead seek alternative careers, outside but also within academe (for example teaching positions in Liberal Arts Schools). Recent attention to non-academic pathways has expanded our understanding of alternative PhD careers. However, career preferences and placements are also nuanced along the academic pathway. Existing research on academic careers (mostly research-centric) has found that certain factors have a significant impact on the prestige of both the institutional placement and the salary of PhD recipients. We understand less, however, about the functioning of career preferences and related placements outside of the top academic research institutions. Our work builds on prior studies of academic career placement to explore the impact that prestige of PhD-granting institution, advisor involvement, and cultural capital have on the extent to which STEM PhDs are placed in their preferred academic institution types. What determines whether an individual with a preference for research oriented institutions works at a Research Extensive university? Or whether an individual with a preference for teaching works at a Liberal Arts college? Using survey data from a nationally representative sample of faculty in biology, biochemistry, civil engineering and mathematics at four different Carnegie Classified institution types (Research Extensive, Research Intensive, Master's I & II, and Liberal Arts Colleges), we examine the relative weight of different individual and institutional characteristics on institutional type placement. We find that doctoral institutional prestige plays a significant role in matching individuals with their preferred institutional type, but that advisor involvement only has an impact on those with a preference for research oriented institutions. Gender effects are also observed, particularly in the role of the advisor in affecting preferred career placement.

Validation and scopolamine-reversal of latent learning in the water maze utilizing a revised direct platform placement procedure.

PubMed

Malin, David H; Schaar, Krystal L; Izygon, Jonathan J; Nghiem, Duyen M; Jabitta, Sikirat Y; Henceroth, Mallori M; Chang, Yu-Hsuan; Daggett, Jenny M; Ward, Christopher P

2015-08-01

The Morris water maze is routinely used to explore neurobiological mechanisms of working memory. Humans can often acquire working memory relevant to performing a task by mere sensory observation, without having to actually perform the task followed by reinforcement. This can be modeled in the water maze through direct placement of a rat on the escape platform so that it can observe the location, and then assessing the subject's performance in swimming back to the platform. However, direct placement procedures have hardly been studied for two decades, reflecting a controversy about whether direct placement resulted in sufficiently rapid and direct swims back to the platform. In the present study, utilizing revised training methods, a more comprehensive measure of trajectory directness, a more rigorous sham-trained control procedure and an optimal placement-test interval, rats swam almost directly back to the platform in under 4s, significantly more quickly and directly than sham-trained subjects. Muscarinic cholinergic mechanisms, which are inactivated by scopolamine, are essential to memory for standard learning paradigms in the water maze. This experiment determined whether this would also be true for latent learning. ANOVA revealed significant negative effects of scopolamine on both speed and accuracy of trajectory, as well as significant positive effects of direct placement training vs. sham-training. In a probe trial, placement-trained animals without scopolamine spent significantly more time and path length in the target quadrant than trained rats with scopolamine and sham-trained rats without scopolamine. Scopolamine impairments are likely due to effects on memory, since the same dose had little effect on performance with a visible platform. The revised direct placement model offers a means of further comparing the neural mechanisms of latent learning with those of standard instrumental learning. Copyright © 2015 Elsevier Inc. All rights reserved.

Take me where I want to go: Institutional prestige, advisor sponsorship, and academic career placement preferences

PubMed Central

Pinheiro, Diogo L.; Newton, Sunni

2017-01-01

Placement in prestigious research institutions for STEM (science, technology, engineering, and mathematics) PhD recipients is generally considered to be optimal. Yet some doctoral recipients are not interested in intensive research careers and instead seek alternative careers, outside but also within academe (for example teaching positions in Liberal Arts Schools). Recent attention to non-academic pathways has expanded our understanding of alternative PhD careers. However, career preferences and placements are also nuanced along the academic pathway. Existing research on academic careers (mostly research-centric) has found that certain factors have a significant impact on the prestige of both the institutional placement and the salary of PhD recipients. We understand less, however, about the functioning of career preferences and related placements outside of the top academic research institutions. Our work builds on prior studies of academic career placement to explore the impact that prestige of PhD-granting institution, advisor involvement, and cultural capital have on the extent to which STEM PhDs are placed in their preferred academic institution types. What determines whether an individual with a preference for research oriented institutions works at a Research Extensive university? Or whether an individual with a preference for teaching works at a Liberal Arts college? Using survey data from a nationally representative sample of faculty in biology, biochemistry, civil engineering and mathematics at four different Carnegie Classified institution types (Research Extensive, Research Intensive, Master’s I & II, and Liberal Arts Colleges), we examine the relative weight of different individual and institutional characteristics on institutional type placement. We find that doctoral institutional prestige plays a significant role in matching individuals with their preferred institutional type, but that advisor involvement only has an impact on those with a preference for research oriented institutions. Gender effects are also observed, particularly in the role of the advisor in affecting preferred career placement. PMID:28493914

2D projection-based software application for mobile C-arms optimises wire placement in the proximal femur - An experimental study.

PubMed

Swartman, B; Frere, D; Wei, W; Schnetzke, M; Beisemann, N; Keil, H; Franke, J; Grützner, P A; Vetter, S Y

2017-10-01

A new software application can be used without fixed reference markers or a registration process in wire placement. The aim was to compare placement of Kirschner wires (K-wires) into the proximal femur with the software application versus the conventional method without guiding. As study hypothesis, we assumed less placement attempts, shorter procedure time and shorter fluoroscopy time using the software. The same precision inside a proximal femur bone model using the software application was premised. The software detects a K-wire within the 2D fluoroscopic image. By evaluating its direction and tip location, it superimposes a trajectory on the image, visualizing the intended direction of the K-wire. The K-wire was positioned in 20 artificial bones with the use of software by one surgeon; 20 bones served as conventional controls. A brass thumb tack was placed into the femoral head and its tip targeted with the wire. Number of placement attempts, duration of the procedure, duration of fluoroscopy time and distance to the target in a postoperative 3D scan were recorded. Compared with the conventional method, use of the application showed fewer attempts for optimal wire placement (p=0.026), shorter duration of surgery (p=0.004), shorter fluoroscopy time (p=0.024) and higher precision (p=0.018). Final wire position was achieved in the first attempt in 17 out of 20 cases with the software and in 9 out of 20 cases with the conventional method. The study hypothesis was confirmed. The new application optimised the process of K-wire placement in the proximal femur in an artificial bone model while also improving precision. Benefits lie especially in the reduction of placement attempts and reduction of fluoroscopy time under the aspect of radiation protection. The software runs on a conventional image intensifier and can therefore be easily integrated into the daily surgical routine. Copyright © 2017 Elsevier Ltd. All rights reserved.

Echocardiography and cardiac MRI in mutation-negative hypertrophic cardiomyopathy in an older patient: a case defining the need for ICD.

PubMed

Rodriguez, Fatima; Degnan, Kathleen O; Seidman, Christine E; Mangion, Judy R

2014-08-01

We report the case of a 67-year-old man with hypertrophic cardiomyopathy who presented for a second opinion about implantable cardio-defibrillator (ICD) placement after a witnessed syncopal episode. Despite his older age, being mutation-negative, and having a maximal septal thickness of 2.2 cm on echocardiography, he demonstrated rapid progression of myocardial fibrosis on cardiac MRI, correlating to ventricular tachyarrhythmias and syncope. We review the role of echocardiography and cardiac MRI in optimizing medical care for such patients who may not otherwise meet criteria for an ICD placement or further interventions. © 2014, Wiley Periodicals, Inc.

Planning Image-Based Measurements in Wind Tunnels by Virtual Imaging

NASA Technical Reports Server (NTRS)

Kushner, Laura Kathryn; Schairer, Edward T.

2011-01-01

Virtual imaging is routinely used at NASA Ames Research Center to plan the placement of cameras and light sources for image-based measurements in production wind tunnel tests. Virtual imaging allows users to quickly and comprehensively model a given test situation, well before the test occurs, in order to verify that all optical testing requirements will be met. It allows optimization of the placement of cameras and light sources and leads to faster set-up times, thereby decreasing tunnel occupancy costs. This paper describes how virtual imaging was used to plan optical measurements for three tests in production wind tunnels at NASA Ames.

Electronic Attack Platform Placement Optimization

DTIC Science & Technology

2014-09-01

Processing in VBA ...............................................................33 2. Client-Server Using Two Different Excel Application...6 Figure 3. Screenshot of the VBA IDE contained within all Microsoft Office products...application using MS Excel’s Applicatin.OnTime method. .....................................33 Figure 20. WINSOCK API Functions needed to use TCP via VBA

A functionally optimized hot-mix asphalt wearing course : part I : preliminary results.

DOT National Transportation Integrated Search

2009-01-01

The purpose of this report was to highlight the preliminary findings of the design, production, placement, and early life performance of a new generation open-graded surface course (also referred to as porous friction course [PFC]) for use in Virgini...

Optimal placement of point detectors on Virginia's freeways : case studies of Northern Virginia and Richmond.

DOT National Transportation Integrated Search

2008-01-01

In Virginia, point detectors in the Northern Virginia and Hampton Roads regions are placed at approximately 1/2 mile spacing. This density is a product of early requirements for incident detection that have proven ineffective and perhaps unnecessary....

Molecular modeling of calmodulin: a comparison with crystallographic data

NASA Technical Reports Server (NTRS)

McDonald, J. J.; Rein, R.

1989-01-01

Two methods of side-chain placement on a modeled protein have been examined. Two molecular models of calmodulin were constructed that differ in the treatment of side chains prior to optimization of the molecule. A virtual bond analysis program developed by Purisima and Scheraga was used to determine the backbone conformation based on 2.2 angstroms resolution C alpha coordinates for the molecules. In the first model, side chains were initially constructed in an extended conformation. In the second model, a conformational grid search technique was employed. Calcium ions were treated explicitly during energy optimization using CHARMM. The models are compared to a recently published refined crystal structure of calmodulin. The results indicate that the initial choices for side-chains, but also significant effects on the main-chain conformation and supersecondary structure. The conformational differences are discussed. Analysis of these and other methods makes possible the formulation of a methodology for more appropriate side-chain placement in modeled proteins.

Automated Prescription of Oblique Brain 3D MRSI

PubMed Central

Ozhinsky, Eugene; Vigneron, Daniel B.; Chang, Susan M.; Nelson, Sarah J.

2012-01-01

Two major difficulties encountered in implementing Magnetic Resonance Spectroscopic Imaging (MRSI) in a clinical setting are limited coverage and difficulty in prescription. The goal of this project was to completely automate the process of 3D PRESS MRSI prescription, including placement of the selection box, saturation bands and shim volume, while maximizing the coverage of the brain. The automated prescription technique included acquisition of an anatomical MRI image, optimization of the oblique selection box parameters, optimization of the placement of OVS saturation bands, and loading of the calculated parameters into a customized 3D MRSI pulse sequence. To validate the technique and compare its performance with existing protocols, 3D MRSI data were acquired from 6 exams from 3 healthy volunteers. To assess the performance of the automated 3D MRSI prescription for patients with brain tumors, the data were collected from 16 exams from 8 subjects with gliomas. This technique demonstrated robust coverage of the tumor, high consistency of prescription and very good data quality within the T2 lesion. PMID:22692829

Radiofrequency ablation of hepatic tumors: simulation, planning, and contribution of virtual reality and haptics.

PubMed

Villard, Caroline; Soler, Luc; Gangi, Afshin

2005-08-01

For radiofrequency ablation (RFA) of liver tumors, evaluation of vascular architecture, post-RFA necrosis prediction, and the choice of a suitable needle placement strategy using conventional radiological techniques remain difficult. In an attempt to enhance the safety of RFA, a 3D simulator, treatment planning, and training tool, that simulates the insertion of the needle, the necrosis of the treated area, and proposes an optimal needle placement, has been developed. The 3D scenes are automatically reconstructed from enhanced spiral CT scans. The simulator takes into account the cooling effect of local vessels greater than 3 mm in diameter, making necrosis shapes more realistic. Optimal needle positioning can be automatically generated by the software to produce complete destruction of the tumor, with maximum respect of the healthy liver and of all major structures to avoid. We also studied how the use of virtual reality and haptic devices are valuable to make simulation and training realistic and effective.

Virtobot 2.0: the future of automated surface documentation and CT-guided needle placement in forensic medicine.

PubMed

Ebert, Lars Christian; Ptacek, Wolfgang; Breitbeck, Robert; Fürst, Martin; Kronreif, Gernot; Martinez, Rosa Maria; Thali, Michael; Flach, Patricia M

2014-06-01

In this paper we present the second prototype of a robotic system to be used in forensic medicine. The system is capable of performing automated surface documentation using photogrammetry, optical surface scanning and image-guided, post-mortem needle placement for tissue sampling, liquid sampling, or the placement of guide wires. The upgraded system includes workflow optimizations, an automatic tool-change mechanism, a new software module for trajectory planning and a fully automatic computed tomography-data-set registration algorithm. We tested the placement accuracy of the system by using a needle phantom with radiopaque markers as targets. The system is routinely used for surface documentation and resulted in 24 surface documentations over the course of 11 months. We performed accuracy tests for needle placement using a biopsy phantom, and the Virtobot placed introducer needles with an accuracy of 1.4 mm (±0.9 mm). The second prototype of the Virtobot system is an upgrade of the first prototype but mainly focuses on streamlining the workflow and increasing the level of automation and also has an easier user interface. These upgrades make the Virtobot a potentially valuable tool for case documentation in a scalpel-free setting that uses purely imaging techniques and minimally invasive procedures and is the next step toward the future of virtual autopsy.

Factors associated to clinical learning in nursing students in primary health care: an analytical cross-sectional study

PubMed Central

Serrano-Gallardo, Pilar; Martínez-Marcos, Mercedes; Espejo-Matorrales, Flora; Arakawa, Tiemi; Magnabosco, Gabriela Tavares; Pinto, Ione Carvalho

2016-01-01

ABSTRACT Objective: to identify the students' perception about the quality of clinical placements and asses the influence of the different tutoring processes in clinical learning. Methods: analytical cross-sectional study on second and third year nursing students (n=122) about clinical learning in primary health care. The Clinical Placement Evaluation Tool and a synthetic index of attitudes and skills were computed to give scores to the clinical learning (scale 0-10). Univariate, bivariate and multivariate (multiple linear regression) analyses were performed. Results: the response rate was 91.8%. The most commonly identified tutoring process was "preceptor-professor" (45.2%). The clinical placement was assessed as "optimal" by 55.1%, relationship with team-preceptor was considered good by 80.4% of the cases and the average grade for clinical learning was 7.89. The multiple linear regression model with more explanatory capacity included the variables "Academic year" (beta coefficient = 1.042 for third-year students), "Primary Health Care Area (PHC)" (beta coefficient = 0.308 for Area B) and "Clinical placement perception" (beta coefficient = - 0.204 for a suboptimal perception). Conclusions: timeframe within the academic program, location and clinical placement perception were associated with students' clinical learning. Students' perceptions of setting quality were positive and a good team-preceptor relationship is a matter of relevance. PMID:27627124

A sequential linear optimization approach for controller design

NASA Technical Reports Server (NTRS)

Horta, L. G.; Juang, J.-N.; Junkins, J. L.

1985-01-01

A linear optimization approach with a simple real arithmetic algorithm is presented for reliable controller design and vibration suppression of flexible structures. Using first order sensitivity of the system eigenvalues with respect to the design parameters in conjunction with a continuation procedure, the method converts a nonlinear optimization problem into a maximization problem with linear inequality constraints. The method of linear programming is then applied to solve the converted linear optimization problem. The general efficiency of the linear programming approach allows the method to handle structural optimization problems with a large number of inequality constraints on the design vector. The method is demonstrated using a truss beam finite element model for the optimal sizing and placement of active/passive-structural members for damping augmentation. Results using both the sequential linear optimization approach and nonlinear optimization are presented and compared. The insensitivity to initial conditions of the linear optimization approach is also demonstrated.

Usefulness and Limitation of Manual Aspiration Immediately After Pneumothorax Complicating Interventional Radiological Procedures with the Transthoracic Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamagami, Takuji, E-mail: yamagami@koto.kpu-m.ac.jp; Kato, Takeharu; Hirota, Tatsuya

2006-12-15

The goal of this study was to evaluate the efficacy of simple aspiration of air from the pleural space to prevent increased pneumothorax and avoid chest tube placement in cases of pneumothorax following interventional radiological procedures performed under computed tomography fluoroscopic guidance with the transthoracic percutaneous approach. While still on the scanner table, 102 cases underwent percutaneous manual aspiration of a moderate or large pneumothorax that had developed during mediastinal, lung, and transthoracic liver biopsies and ablations of lung and hepatic tumors (independent of symptoms). Air was aspirated from the pleural space by an 18- or 20-gauge intravenous catheter attachedmore » to a three-way stopcock and 20- or 50-mL syringe. We evaluated the management of each such case during and after manual aspiration. In 87 of the 102 patients (85.3%), the pneumothorax had resolved completely on follow-up chest radiographs without chest tube placement, but chest tube placement was required in 15 patients. Requirement of chest tube insertion significantly increased in parallel with the increased volume of aspirated air. When receiver-operating characteristic curves were applied retrospectively, the optimal cutoff level of aspirated air on which to base a decision to abandon manual aspiration alone and resort to chest tube placement was 670 mL. Percutaneous manual aspiration of the pneumothorax performed immediately after the procedure might prevent progressive pneumothorax and eliminate the need for chest tube placement. However, when the amount of aspirated air is large (such as more than 670 mL), chest tube placement should be considered.« less

Optimization of magnet end-winding geometry

NASA Astrophysics Data System (ADS)

Reusch, Michael F.; Weissenburger, Donald W.; Nearing, James C.

1994-03-01

A simple, almost entirely analytic, method for the optimization of stress-reduced magnet-end winding paths for ribbon-like superconducting cable is presented. This technique is based on characterization of these paths as developable surfaces, i.e., surfaces whose intrinsic geometry is flat. The method is applicable to winding mandrels of arbitrary geometry. Computational searches for optimal winding paths are easily implemented via the technique. Its application to the end configuration of cylindrical Superconducting Super Collider (SSC)-type magnets is discussed. The method may be useful for other engineering problems involving the placement of thin sheets of material.

A Distributed Parallel Genetic Algorithm of Placement Strategy for Virtual Machines Deployment on Cloud Platform

PubMed Central

Dong, Yu-Shuang; Xu, Gao-Chao; Fu, Xiao-Dong

2014-01-01

The cloud platform provides various services to users. More and more cloud centers provide infrastructure as the main way of operating. To improve the utilization rate of the cloud center and to decrease the operating cost, the cloud center provides services according to requirements of users by sharding the resources with virtualization. Considering both QoS for users and cost saving for cloud computing providers, we try to maximize performance and minimize energy cost as well. In this paper, we propose a distributed parallel genetic algorithm (DPGA) of placement strategy for virtual machines deployment on cloud platform. It executes the genetic algorithm parallelly and distributedly on several selected physical hosts in the first stage. Then it continues to execute the genetic algorithm of the second stage with solutions obtained from the first stage as the initial population. The solution calculated by the genetic algorithm of the second stage is the optimal one of the proposed approach. The experimental results show that the proposed placement strategy of VM deployment can ensure QoS for users and it is more effective and more energy efficient than other placement strategies on the cloud platform. PMID:25097872

A distributed parallel genetic algorithm of placement strategy for virtual machines deployment on cloud platform.

PubMed

Dong, Yu-Shuang; Xu, Gao-Chao; Fu, Xiao-Dong

2014-01-01

The cloud platform provides various services to users. More and more cloud centers provide infrastructure as the main way of operating. To improve the utilization rate of the cloud center and to decrease the operating cost, the cloud center provides services according to requirements of users by sharding the resources with virtualization. Considering both QoS for users and cost saving for cloud computing providers, we try to maximize performance and minimize energy cost as well. In this paper, we propose a distributed parallel genetic algorithm (DPGA) of placement strategy for virtual machines deployment on cloud platform. It executes the genetic algorithm parallelly and distributedly on several selected physical hosts in the first stage. Then it continues to execute the genetic algorithm of the second stage with solutions obtained from the first stage as the initial population. The solution calculated by the genetic algorithm of the second stage is the optimal one of the proposed approach. The experimental results show that the proposed placement strategy of VM deployment can ensure QoS for users and it is more effective and more energy efficient than other placement strategies on the cloud platform.

What is the definition of a poisoning?

PubMed

Uges, D R

2001-03-01

New insights in medicine and acceptable treatments necessitates an adjustment of the existing definition of clinical or forensic poisoning to: 'An individual's medical or social unacceptable condition as a consequence of being under influence of an exogenous substance in a dose too high for the person concerned'. For medical and legal purposes it is important to know how the victim became poisoned. In general, there are three ways of causing medical poisoning: accidental poisoning, including iatrogenic poisoning, experimental and intentional poisoning. Nowadays iatrogenic intoxication, poisoning caused by the Münchhausen's syndrome (by proxy) and experimental poisoning (designer drugs) have a major place in contemporary toxicology. Although some toxicologists use the word 'intoxication' only overdoses with central effects, in this article 'intoxication' and 'poisoning' are considered to be synonymous.

Prolonged release matrix tablet of pyridostigmine bromide: formulation and optimization using statistical methods.

PubMed

Bolourchian, Noushin; Rangchian, Maryam; Foroutan, Seyed Mohsen

2012-07-01

The aim of this study was to design and optimize a prolonged release matrix formulation of pyridostigmine bromide, an effective drug in myasthenia gravis and poisoning with nerve gas, using hydrophilic - hydrophobic polymers via D-optimal experimental design. HPMC and carnauba wax as retarding agents as well as tricalcium phosphate were used in matrix formulation and considered as independent variables. Tablets were prepared by wet granulation technique and the percentage of drug released at 1 (Y(1)), 4 (Y(2)) and 8 (Y(3)) hours were considered as dependent variables (responses) in this investigation. These experimental responses were best fitted for the cubic, cubic and linear models, respectively. The optimal formulation obtained in this study, consisted of 12.8 % HPMC, 24.4 % carnauba wax and 26.7 % tricalcium phosphate, had a suitable prolonged release behavior followed by Higuchi model in which observed and predicted values were very close. The study revealed that D-optimal design could facilitate the optimization of prolonged release matrix tablet containing pyridostigmine bromide. Accelerated stability studies confirmed that the optimized formulation remains unchanged after exposing in stability conditions for six months.

Optimizing Dynamical Network Structure for Pinning Control

NASA Astrophysics Data System (ADS)

Orouskhani, Yasin; Jalili, Mahdi; Yu, Xinghuo

2016-04-01

Controlling dynamics of a network from any initial state to a final desired state has many applications in different disciplines from engineering to biology and social sciences. In this work, we optimize the network structure for pinning control. The problem is formulated as four optimization tasks: i) optimizing the locations of driver nodes, ii) optimizing the feedback gains, iii) optimizing simultaneously the locations of driver nodes and feedback gains, and iv) optimizing the connection weights. A newly developed population-based optimization technique (cat swarm optimization) is used as the optimization method. In order to verify the methods, we use both real-world networks, and model scale-free and small-world networks. Extensive simulation results show that the optimal placement of driver nodes significantly outperforms heuristic methods including placing drivers based on various centrality measures (degree, betweenness, closeness and clustering coefficient). The pinning controllability is further improved by optimizing the feedback gains. We also show that one can significantly improve the controllability by optimizing the connection weights.

Acute salicylate poisoning: risk factors for severe outcome.

PubMed

Shively, Rachel M; Hoffman, Robert S; Manini, Alex F

2017-03-01

Salicylate poisoning remains a significant public health threat with more than 20,000 exposures reported annually in the United States. We aimed to establish early predictors of severe in-hospital outcomes in Emergency Department patients presenting with acute salicylate poisoning. This was a secondary data analysis of adult salicylate overdoses from a prospective cohort study of acute drug overdoses at two urban university teaching hospitals from 2009 to 2013. Patients were included based on confirmed salicylate ingestion and enrolled consecutively. Demographics, clinical parameters, treatment and disposition were collected from the medical record. Severe outcome was defined as a composite occurrence of acidemia (pH <7.3 or bicarbonate <16 mEq/L), hemodialysis, and/or death. Out of 1997 overdoses screened, 48 patients met inclusion/exclusion criteria. Patient characteristics were 43.8% male, median age 32 (range 18-87), mean initial salicylate concentration 28.1 mg/dL (SD 26.6), and 20.8% classified as severe outcome. Univariate analysis indicated that age, respiratory rate, lactate, coma, and the presence of co-ingestions were significantly associated with severe outcome, while initial salicylate concentration alone had no association. However, when adjusted for salicylate concentration, only age (OR 1.13; 95% CI 1.02-1.26) and respiratory rate (OR 1.29; 95% CI 1.02-1.63) were independent predictors. Additionally, lactate showed excellent test characteristics to predict severe outcome, with an optimal cutpoint of 2.25 mmol/L (78% sensitivity, 67% specificity). In adult Emergency Department patients with acute salicylate poisoning, independent predictors of severe outcome were older age and increased respiratory rate, as well as initial serum lactate, while initial salicylate concentration alone was not predictive.

Treatment strategies for early presenting acetaminophen overdose: a survey of medical directors of poison centers in North America and Europe.

PubMed

Kozer, E; McGuigan, M

2002-03-01

Acetaminophen is frequently used in self-poisoning in Western countries. Although treatment with N-acetylcysteine (NAC) reduces liver injury, no consensus exists on the preferred management of acetaminophen toxicity. To describe the approach taken by toxicologists in North America and Europe toward the management of acetaminophen toxicity. Medical directors of poison centers in the US, Canada, and Europe were surveyed by means of a questionnaire presenting two clinical scenarios of acetaminophen overdose: a healthy adolescent with no risk factors who had an acute ingestion of acetaminophen, and an adult with both acute ingestion and possible risk factors. For each case, several questions about the management of these patients were asked. Questionnaires were sent to medical directors of 76 poison centers in North America and 48 in Europe, with response rates of 62% and 44%, respectively. Forty percent of responders suggested using charcoal 4 hours after ingestion of a potential toxic dose of acetaminophen, and 90% recommended treatment with NAC when levels were above 150 microg/mL but below 200 microg/mL 4 hours after ingestion. Duration of treatment with oral NAC ranged from 24 to 96 hours; 38 responders suggested a duration of 72 hours. Of 49 centers recommending oral NAC, 18 (36.7%) said they might consider treatment for less than 72 hours. Eleven of 29 (37.9%) responders suggested treatment with intravenous NAC for more than 20 hours as their usual protocol or a protocol for specific circumstances. Our study showed large variability in the management of acetaminophen overdose. Variations in treatment protocols should be addressed in clinical trials to optimize the treatment for this common problem.

Preparation of a Ni-MgO-Al2O3 catalyst with high activity and resistance to potassium poisoning during direct internal reforming of methane in molten carbonate fuel cells

NASA Astrophysics Data System (ADS)

Jang, Won-Jun; Jung, You-Shick; Shim, Jae-Oh; Roh, Hyun-Seog; Yoon, Wang Lai

2018-02-01

Steam reforming of methane (SRM) is conducted using a series of Ni-MgO-Al2O3 catalysts for direct internal reforming (DIR) in molten carbonate fuel cells (MCFCs). Ni-MgO-Al2O3 catalysts are prepared by the homogeneous precipitation method with a variety of MgO loading amounts ranging from 3 to 15 wt%. In addition, each precursor concentrations are systemically changed (Ni: 1.2-4.8 mol L-1; Mg: 0.3-1.2 mol L-1; Al: 0.4-1.6 mol L-1) at the optimized composition (10 wt% MgO). The effects of MgO loading and precursor concentration on the catalytic performance and resistance against poisoning of the catalyst by potassium (K) are investigated. The Ni-MgO-Al2O3 catalyst with 10 wt% MgO and the original precursor concentration (Ni: 1.2 mol L-1; Mg: 0.3 mol L-1; Al: 0.4 mol L-1) exhibits the highest CH4 conversion and resistance against K poisoning even at the extremely high gas space velocity (GHSV) of 1,512,000 h-1. Excellent SRM performance of the Ni-MgO-Al2O3 catalyst is attributed to strong metal (Ni) to alumina support interaction (SMSI) when magnesium oxide (MgO) is co-precipitated with the Ni-Al2O3. The enhanced interaction of the Ni with MgO-Al2O3 support is found to protect the active Ni species against K poisoning.

Linear antenna array optimization using flower pollination algorithm.

PubMed

Saxena, Prerna; Kothari, Ashwin

2016-01-01

Flower pollination algorithm (FPA) is a new nature-inspired evolutionary algorithm used to solve multi-objective optimization problems. The aim of this paper is to introduce FPA to the electromagnetics and antenna community for the optimization of linear antenna arrays. FPA is applied for the first time to linear array so as to obtain optimized antenna positions in order to achieve an array pattern with minimum side lobe level along with placement of deep nulls in desired directions. Various design examples are presented that illustrate the use of FPA for linear antenna array optimization, and subsequently the results are validated by benchmarking along with results obtained using other state-of-the-art, nature-inspired evolutionary algorithms such as particle swarm optimization, ant colony optimization and cat swarm optimization. The results suggest that in most cases, FPA outperforms the other evolutionary algorithms and at times it yields a similar performance.

Characterization of 42 microsatellite markers from poison ivy, Toxicodendron radicans (Anacardiaceae).

PubMed

Hsu, Tsai-Wen; Shih, Huei-Chuan; Kuo, Chia-Chi; Chiang, Tzen-Yuh; Chiang, Yu-Chung

2013-10-14

Poison ivy, Toxicodendron radicans, and poison oaks, T. diversilobum and T. pubescens, are perennial woody species of the Anacardiaceae and are poisonous, containing strong allergens named urushiols that cause allergic contact dermatitis. Poison ivy is a species distributed from North America to East Asia, while T. diversilobum and T. pubescens are distributed in western and eastern North America, respectively. Phylogreography and population structure of these species remain unclear. Here, we developed microsatellite markers, via constructing a magnetic enriched microsatellite library, from poison ivy. We designed 51 primer pairs, 42 of which successfully yielded products that were subsequently tested for polymorphism in poison oak, and three subspecies of poison ivy. Among the 42 loci, 38 are polymorphic, while 4 are monomorphic. The number of alleles and the expected heterozygosity ranged from 1 to 12 and from 0.10 to 0.87, respectively, in poison ivy, while varied from 2 to 8 and, from 0.26 to 0.83, respectively in poison oak. Genetic analysis revealed distinct differentiation between poison ivy and poison oak, whereas slight genetic differentiation was detected among three subspecies of poison ivy. These highly polymorphic microsatellite fingerprints enable biologists to explore the population genetics, phylogeography, and speciation in Toxicodendron.

Characterization of 42 Microsatellite Markers from Poison Ivy, Toxicodendron radicans (Anacardiaceae)

PubMed Central

Hsu, Tsai-Wen; Shih, Huei-Chuan; Kuo, Chia-Chi; Chiang, Tzen-Yuh; Chiang, Yu-Chung

2013-01-01

Poison ivy, Toxicodendron radicans, and poison oaks, T. diversilobum and T. pubescens, are perennial woody species of the Anacardiaceae and are poisonous, containing strong allergens named urushiols that cause allergic contact dermatitis. Poison ivy is a species distributed from North America to East Asia, while T. diversilobum and T. pubescens are distributed in western and eastern North America, respectively. Phylogreography and population structure of these species remain unclear. Here, we developed microsatellite markers, via constructing a magnetic enriched microsatellite library, from poison ivy. We designed 51 primer pairs, 42 of which successfully yielded products that were subsequently tested for polymorphism in poison oak, and three subspecies of poison ivy. Among the 42 loci, 38 are polymorphic, while 4 are monomorphic. The number of alleles and the expected heterozygosity ranged from 1 to 12 and from 0.10 to 0.87, respectively, in poison ivy, while varied from 2 to 8 and, from 0.26 to 0.83, respectively in poison oak. Genetic analysis revealed distinct differentiation between poison ivy and poison oak, whereas slight genetic differentiation was detected among three subspecies of poison ivy. These highly polymorphic microsatellite fingerprints enable biologists to explore the population genetics, phylogeography, and speciation in Toxicodendron. PMID:24129176

An epidemiological study of poisoning in northern Islamic Republic of Iran.

PubMed

Moghadamnia, A A; Abdollahi, M

2002-01-01

We examined the causes and mortality of poisoning in the province of Mazandaran. In all, 1751 poisoning cases referred to four main hospitals over a three-year period (1997-2000) were included. More poisoning cases were females (55.5%) than males (45.5%) but the proportional mortality for males was greater than for females (65% versus 35%). The greatest proportion of poisonings occurred between the ages of 16 and 25 years. Most frequent was intentional poisoning, followed by accidental and occupational poisoning. Medicines were the most common cause, followed by chemicals such as pesticides. Poisoning by opiates, aluminium or zinc phosphide, rodenticides, petroleum and ethanol intoxication was also observed. Pesticide poisoning was most frequently fatal.

[Acute poisonings in Poland during the period 1997-1999. An analysis of files from the Krakow Poison Information Center].

PubMed

Kotwica, Małgorzata; Rogaczewska, Anna

2002-01-01

This work analyses the 1997-1999 data received from Polish poison units at Gdańsk, Kraków, Lublin, Łódź, Poznań, Rzeszów, Tarnów, Sosnowiec, Warszawa, Wrocław on patients hospitalised there and patients treated at other hospitals but consulted by specialists of those centres. The analysis shows that drugs constituted the most frequent cause of the poisonings (over 45% all poisonings). Poisonings with: alcohols accounted for 17.6%, gases (primarily by carbon monoxide) for 5.3%, pesticides for 4.5%, substances of abuse for 4.1%, and with organic solvents for 4.0% total poisonings. Suicidal poisonings constituted about 36% total poisonings, accidental over 25%, poisonings resulting for street-drugs and alcohol abuse over 23%, chemical emergency or fire 1%, while occupational poisonings constituted only 0.9% total poisonings. In 1997-1999, the highest numbers of deaths were recorded after intake of: drugs (102), ethylene glycol (39), alcohols (49, including 16 after intake of methanol and 33 after intake of ethanol), pesticides (15 deaths).

[Effects of controlling specific dangerous pesticides on prevention of acute pesticide poisoning in rural area].

PubMed

Zhang, Ping; Zhao, Jiang-xia; Chang, Xiu-li; Zhou, Zhi-jun

2010-09-01

To investigate the effects of controlling the specific dangerous pesticides on prevention of acute pesticide poisoning in rural area. The data of reported cases of pesticide poisoning were analyzed to find out the specific dangerous pesticide in acute pesticide poisoning. Then the occurrence of occupational pesticide poisoning and fatality of non-occupational pesticide poisoning were estimated under the hypothesis of removing the specific dangerous pesticides. The data indicated that parathion (including methyl parathion) was the specific dangerous pesticide inducing occupational pesticide poisoning. After removing the use of parathion, the hazard of pesticides which caused occupational pesticide poisoning would be significantly decreased (P < 0.01). Parathion was also the most dangerous pesticide which caused non-occupational pesticide poisoning, with its fatality up to 15.8%. If parathion was well controlled, the fatality of non-occupational pesticide poisoning would be declined from 9.4% to 7.4%. The analyses of related literatures also revealed the similar results. The occurrence of occupational pesticide poisoning and fatality of non-occupational pesticide poisoning may decrease if the most dangerous pesticides are well supervised.

Optimal Filling of Shapes

NASA Astrophysics Data System (ADS)

Phillips, Carolyn L.; Anderson, Joshua A.; Huber, Greg; Glotzer, Sharon C.

2012-05-01

We present filling as a type of spatial subdivision problem similar to covering and packing. Filling addresses the optimal placement of overlapping objects lying entirely inside an arbitrary shape so as to cover the most interior volume. In n-dimensional space, if the objects are polydisperse n-balls, we show that solutions correspond to sets of maximal n-balls. For polygons, we provide a heuristic for finding solutions of maximal disks. We consider the properties of ideal distributions of N disks as N→∞. We note an analogy with energy landscapes.

Theory for controlling individual self-propelled micro-swimmers by photon nudging II: confinement.

PubMed

Selmke, Markus; Khadka, Utsab; Bregulla, Andreas P; Cichos, Frank; Yang, Haw

2018-04-18

Photon nudging allows the manipulation and confinement of individual self-propelled micro-swimmers in 2D and 3D environments using feedback controls. Presented in this second part of a two-part contribution are theoretical models that afford the characterization for the positioning distribution associated with active localization. A derivation for the optimal nudging speed and acceptance angle is given for minimal placement uncertainty. The analytical solutions allow for a discussion on the physical underpinning that underlies controllability and optimality.

An efficient multi-objective optimization method for water quality sensor placement within water distribution systems considering contamination probability variations.

PubMed

He, Guilin; Zhang, Tuqiao; Zheng, Feifei; Zhang, Qingzhou

2018-06-20

Water quality security within water distribution systems (WDSs) has been an important issue due to their inherent vulnerability associated with contamination intrusion. This motivates intensive studies to identify optimal water quality sensor placement (WQSP) strategies, aimed to timely/effectively detect (un)intentional intrusion events. However, these available WQSP optimization methods have consistently presumed that each WDS node has an equal contamination probability. While being simple in implementation, this assumption may do not conform to the fact that the nodal contamination probability may be significantly regionally varied owing to variations in population density and user properties. Furthermore, the low computational efficiency is another important factor that has seriously hampered the practical applications of the currently available WQSP optimization approaches. To address these two issues, this paper proposes an efficient multi-objective WQSP optimization method to explicitly account for contamination probability variations. Four different contamination probability functions (CPFs) are proposed to represent the potential variations of nodal contamination probabilities within the WDS. Two real-world WDSs are used to demonstrate the utility of the proposed method. Results show that WQSP strategies can be significantly affected by the choice of the CPF. For example, when the proposed method is applied to the large case study with the CPF accounting for user properties, the event detection probabilities of the resultant solutions are approximately 65%, while these values are around 25% for the traditional approach, and such design solutions are achieved approximately 10,000 times faster than the traditional method. This paper provides an alternative method to identify optimal WQSP solutions for the WDS, and also builds knowledge regarding the impacts of different CPFs on sensor deployments. Copyright © 2018 Elsevier Ltd. All rights reserved.

Deaths from pesticide poisoning in South Korea: trends over 10 years.

PubMed

Lee, Won Jin; Cha, Eun Shil; Park, Eun Sook; Kong, Kyoung Ae; Yi, Jun Hyeok; Son, Mia

2009-02-01

Pesticide poisoning is a major cause of death in the world. The objective of this study was to examine the trends of pesticide poisoning deaths and their epidemiologic characteristics in South Korea. We evaluated the age-standardized mortality rates from pesticide-related deaths (intentional self-poisoning, accidental poisoning, assault, undetermined intent poisoning) in South Korea from 1996 through 2005, using registered death data obtained from the Korea National Statistical Office. The regional rurality index was calculated and correlation analyses were used to estimate the association with pesticide poisoning mortality. The number of pesticide poisoning deaths from 1996 through 2005 was 25,360, which accounted for 58.3% of the total poisoning fatalities. The age-standardized mortality rates by pesticide poisoning significantly increased from 4.42 to 6.42 per 100,000 population, whereas the total death rate was decreased in the same period. Intentional self-poisoning was the majority cause of death from pesticides (84.8% of total pesticide poisoning deaths). The majority of the pesticide poisoning deaths were men, over 50 years old, with education less than middle school, and residing in rural areas. The rate of pesticide poisoning deaths was the highest in the farming period and was significantly correlated with the rurality index of each region. Pesticide poisoning deaths substantially increased during the 10-year study period, and showed demographic, seasonal and regional variations. More intensive intervention efforts to reduce pesticide mortality should become a public health priority in South Korea.

[Charcoal, cocaine and rattlesnakes: evidence-based treatment of poisoning].

PubMed

Schaper, A

2013-10-01

Since ancient times poisoning has been treated medicinally. Clinical toxicology, in the narrow sense of the term, developed from the foundation of specialized medical treatment units for poisoning and the formation of the first poison information centers in the second half of the twentieth century. Historically, the first poison information centers were often localized at pediatric clinics or departments of internal medicine. It became increasingly more obvious that this pooling of competences made sense. This article gives a general introduction in clinical toxicology and presents the functions and key activities of emergency poison centers. The organisation and work of a poisons centre is demonstrated on the basis of the Poisons Information Center (GIZ) North annual report for 2011. In a short summary the basic principles of clinical toxicology are elucidated: the primary removal of poisons by gastric lavage and administration of activated charcoal, secondary removal of poisons by enhanced elimination using hemodialysis, hemoperfusion, multi-dose activated charcoal and molecular adsorbent recirculating systems (MARS) and the indications for administration of specific antidotes or antivenins (antisera against poisoning by poisonous animals). Gastric lavage is indicated within 1 h after ingestion of a potentially life-threatening dose of a poison. In cases of poisoning with substances which penetrate the central nervous system (CNS) gastric lavage should be performed only after endotracheal intubation due to the risk of aspiration. The basic management of poisoned patients by emergency medicine personnel out of hospital and on the way to hospital is presented. The Bremen list, a compilation of the five antidotes, atropine, 4-dimethylaminophenol (4-DMAP), tolonium chloride, naloxone and activated charcoal for out of hospital treatment by emergency doctors is presented. In all, even questionable cases of poisoning consultation at emergency poison centers is recommended. An extensive list of all German speaking poison information centers is available on the homepage of GIZ-Nord (http://www.giz-nord.de).

The Role of Geriatric Assessment Units in Caring for the Elderly: An Analytic Review.

ERIC Educational Resources Information Center

Rubenstein, Laurence Z.; And Others

1982-01-01

Although their structures and objectives vary considerably Geriatric Assessment Units (GAUs) are generally designed to assess elderly patients' medical and psychosocial problems, to determine optimal placement, and often to provide therapy and rehabilitation. Offers a framework for examining structural and outcome variables for GAUs. (Author)

Evaluation of Handgun and Broadcast Systems for Spray Deposition in Greenhouse Poinsettia Canopies

USDA-ARS?s Scientific Manuscript database

Accurate placement of these pesticides in controlled environment greenhouse settings is critical for optimizing efficacy as well as for minimizing plant injury and off-target movement. However, there are few recommendations on how to make efficient applications of pesticides which provide the desir...

Tone Gestures and Constraint Interaction in Sierra Juarez Zapotec

ERIC Educational Resources Information Center

Tejada, Laura

2012-01-01

This dissertation examines floating tones and tone gesture deactivation in Sierra Juarez Zapotec (SJZ), and provides an Optimality Theoretic account of tonal spreading and placement using insights from Articulatory Phonology. While the data portion of the dissertation is drawn from SJZ, the approach has broader implications for theories of tonal…

SUSTAIN – A Framework for Placement of Best Management Practices in Urban Watersheds to Protect Water Quality

EPA Science Inventory

Watershed and stormwater managers need modeling tools to evaluate alternative plans for water quality management and flow abatement techniques in urban and developing areas. A watershed-scale, decision-support framework that is based on cost optimization is needed to support gov...

Optimization of Passive Coherent Receiver System Placement

DTIC Science & Technology

2013-09-01

spheroid object with a constant radar cross section (RCS). Additionally, the receiver and transmitters are assumed to be notional isotropic antennae...software- defined radio for equatorial plasma instability studies,” Radio Science, vol. 48, pp. 1–11. Aug. 2013. [2] P. C. Zhang and B. Y. Li, “Passive

Pesticide poisoning and its related factors among Korean farmers.

PubMed

Shin, D C; Kim, H J; Jung, S H; Park, C Y; Lee, S Y; Kim, C B

1998-01-01

This study has been carried out to assess the health damages due to pesticide use and its related risk factors among Korean farmers. Data regarding pesticide handling and poisoning symptoms were collected by means of a questionnaire filled in by 1,032 farmers from two provinces. The results showed that during summer farming 21.9% of the subjects experienced suspected pesticide poisoning. 18.8% mild poisoning, and 2% more serious poisoning. Univariate and logistic regression analyses between "no poisoning", including the "suspected poisoning" and "poisoning" groups, were performed to select significant variables related to pesticide poisoning. Four variables were significantly associated: sex, days of consecutive pesticide use, hours of pesticide use per day, having received safety education (weakly associated), and compliance with safety guidelines for application. Safety education was weakly associated with poisoning, while age, education, wearing protective gear, and compliance with safety guidelines for personal hygiene after pesticide use were not significant risk factors to determine pesticide poisoning.

[Situation of pesticide poisoning in Huzhou from 2006 to 2009].

PubMed

Liu, Tao; Zhang, Chuan-hui; Zhang, Peng; Jin, Mei-hua

2011-01-01

To understand the situations of pesticide poisoning in Huzhou and take preventive strategy and measures against the pesticide poisoning. Case reports between 2006 and 2009 in the data base of reporting system for occupational diseases were computed by Excel for windows and statistical significance by SPSS12.0. A total of 2298 patients were reported from 2006 to 2009. Among them, the incidence of occupational poisoning accounted for 25.59% (588 cases), including 4 fatalities (fatality rate, 0.68%). Male patients (458 cases, 77.89%) were more than female ones (130 cases, 22.11%) in occupational pesticides poisoning. Summer and autumn were the most seasons in occupational pesticides poisoning occurring. The incidence of non-occupational pesticides poisoning accounted for 74.41% (1710, cases), including 112 fatalities (fatality rate, 6.55%). Female patients (952 cases, 55.67%) were more than male ones (758 cases, 44.33%) in non-occupational pesticides poisoning. 15 - 55 years were the highest incidences among non-occupational pesticides poisoning patients. Insecticides especially organophosphorus insecticides such as methamidophos, parathion, and omethoate comprised a higher proportion, accounting for 79.98% of the pesticides poisoning. The incidence and the fatality rate of occupational pesticide poisoning were reduced in the city. However, more attention should be paid to non-occupational pesticides poisoning. To decrease the numbers of pesticide poisoning and the risks of death, the relevant departments should take preventive strategy and measures against the pesticide poisoning.

American Association of Poison Control Centers

MedlinePlus

... all alerts right left NEW! Check out PoisonHelp.org Now there are two ways to get help ... AAPCC's new interactive online poison information tool, PoisonHelp.org. PoisonHelp.org Make your smartphone even smarter. Text " ...

The Selection and Placement Method of Materialized Views on Big Data Platform of Equipment Condition Assessment

NASA Astrophysics Data System (ADS)

Ma, Yan; Yao, Jinxia; Gu, Chao; Chen, Yufeng; Yang, Yi; Zou, Lida

2017-05-01

With the formation of electric big data environment, more and more big data analyses emerge. In the complicated data analysis on equipment condition assessment, there exist many join operations, which are time-consuming. In order to save time, the approach of materialized view is usually used. It places part of common and critical join results on external storage and avoids the frequent join operation. In the paper we propose the methods of selecting and placing materialized views to reduce the query time of electric transmission and transformation equipment, and make the profits of service providers maximal. In selection method we design a computation way for the value of non-leaf node based on MVPP structure chart. In placement method we use relevance weights to place the selected materialized views, which help reduce the network transmission time. Our experiments show that the proposed selection and placement methods have a high throughput and good optimization ability of query time for electric transmission and transformation equipment.

Altered Passive Eruption Complicating Optimal Orthodontic Bracket Placement: A Case Report and Review of Literature.

PubMed

Pulgaonkar, Rohan; Chitra, Prasad

2015-11-01

An unusual case of altered passive eruption with gingival hyperpigmentation and a Class I malocclusion in a 12-year-old girl having no previous history of medication is presented. The patient reported with spacing in the upper arch, moderate crowding in the lower arch, anterior crossbite and excessive gingival tissue on the labial surfaces of teeth in both the arches. The inadequate crown lengths made placement of the orthodontic brackets difficult. Preadjusted orthodontic brackets have a very precise placement protocol which can affect tooth movement in all 3 planes of space if violated. The periodontal condition was diagnosed as altered passive eruption Type IA. Interdisciplinary treatment protocols including periodontal surgical and orthodontic procedures were used. The periodontal surgical procedures were carried out prior to orthodontic therapy and the results obtained were satisfactory. It is suggested that orthodontists should be aware of conditions like altered passive eruption and modalities of management. In most instances, orthodontic therapy is not hindered.

Nomogram to predict successful placement in surgical subspecialty fellowships using applicant characteristics.

PubMed

Muffly, Tyler M; Barber, Matthew D; Karafa, Matthew T; Kattan, Michael W; Shniter, Abigail; Jelovsek, J Eric

2012-01-01

The purpose of the study was to develop a model that predicts an individual applicant's probability of successful placement into a surgical subspecialty fellowship program. Candidates who applied to surgical fellowships during a 3-year period were identified in a set of databases that included the electronic application materials. Of the 1281 applicants who were available for analysis, 951 applicants (74%) successfully placed into a colon and rectal surgery, thoracic surgery, vascular surgery, or pediatric surgery fellowship. The optimal final prediction model, which was based on a logistic regression, included 14 variables. This model, with a c statistic of 0.74, allowed for the determination of a useful estimate of the probability of placement for an individual candidate. Of the factors that are available at the time of fellowship application, 14 were used to predict accurately the proportion of applicants who will successfully gain a fellowship position. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Common causes of poisoning: etiology, diagnosis and treatment.

PubMed

Müller, Dieter; Desel, Herbert

2013-10-01

In 2011, German hospitals treated approximately 205 000 patients suffering from acute poisoning. Change is seen over time both in the types of poisoning that occur and in the indications for specific treatment. This article is based on a selective review of the literature, with special attention to the health reports of the German federal government, the annual reports of the GIZ-Nord Poisons Center (the poison information center for the four northwestern states of Germany, i.e. Bremen, Hamburg, Lower Saxony and Schleswig-Holstein), and the recommendations of international medical associations. From 1996 to 2011, the GIZ-Nord Poisons Center answered more than 450 000 inquiries, most of which involved exposures to medical drugs, chemicals, plants, foods, or cosmetics. Poisoning was clinically manifest in only a fraction of these cases. Ethanol intoxication is the commonest type of acute poisoning and suicide by medical drug overdose is the commonest type of suicide by poisoning. Death from acute poisoning is most commonly the result of either smoke inhalation or illegal drug use. Severe poisoning is only rarely due to the ingestion of chemicals (particularly detergents and cleaning products), cosmetics, or plant matter. Medical procedures that are intended to reduce the absorption of a poison or enhance its elimination are now only rarely indicated. Antidotes (e.g., atropine, 4-dimethylaminophenol, naloxone, toluidine blue) are available for only a few kinds of poisoning. Randomized clinical trials of treatment have been carried out for only a few substances. Most exposures to poisons can be treated with general emergency care and, if necessary, with symptomatic intensive-care measures. Poison information centers help ensure that cases of poisoning are dealt with efficiently. The data they collect are a useful aid to toxicological assessment and can serve as a point of departure for research projects.

An automated optimization tool for high-dose-rate (HDR) prostate brachytherapy with divergent needle pattern

NASA Astrophysics Data System (ADS)

Borot de Battisti, M.; Maenhout, M.; de Senneville, B. Denis; Hautvast, G.; Binnekamp, D.; Lagendijk, J. J. W.; van Vulpen, M.; Moerland, M. A.

2015-10-01

Focal high-dose-rate (HDR) for prostate cancer has gained increasing interest as an alternative to whole gland therapy as it may contribute to the reduction of treatment related toxicity. For focal treatment, optimal needle guidance and placement is warranted. This can be achieved under MR guidance. However, MR-guided needle placement is currently not possible due to space restrictions in the closed MR bore. To overcome this problem, a MR-compatible, single-divergent needle-implant robotic device is under development at the University Medical Centre, Utrecht: placed between the legs of the patient inside the MR bore, this robot will tap the needle in a divergent pattern from a single rotation point into the tissue. This rotation point is just beneath the perineal skin to have access to the focal prostate tumor lesion. Currently, there is no treatment planning system commercially available which allows optimization of the dose distribution with such needle arrangement. The aim of this work is to develop an automatic inverse dose planning optimization tool for focal HDR prostate brachytherapy with needle insertions in a divergent configuration. A complete optimizer workflow is proposed which includes the determination of (1) the position of the center of rotation, (2) the needle angulations and (3) the dwell times. Unlike most currently used optimizers, no prior selection or adjustment of input parameters such as minimum or maximum dose or weight coefficients for treatment region and organs at risk is required. To test this optimizer, a planning study was performed on ten patients (treatment volumes ranged from 8.5 cm3to 23.3 cm3) by using 2-14 needle insertions. The total computation time of the optimizer workflow was below 20 min and a clinically acceptable plan was reached on average using only four needle insertions.

Look Out! It's Poison Ivy!

ERIC Educational Resources Information Center

Darlington, Elizabeth, Day

1986-01-01

Provides background information on poison ivy and offers suggestions for instructional activities. Includes illustrations of the varieties of poison ivy leaf forms and poison ivy look-alikes. Highlights interesting facts and cases associated with poison ivy and its relatives. (ML)

Long-axis view for ultrasound-guided central venous catheter placement via the internal jugular vein.

PubMed

Mahan, Angel F; McEvoy, Matthew D; Gravenstein, Nikolaus

2016-04-01

In modern practice, real-time ultrasound guidance is commonly employed for the placement of internal jugular vein catheters. With a new tool, such as ultrasound, comes the opportunity to refine and further optimize the ultrasound view during jugular vein catheterization. We describe jugular vein access techniques and use the long-axis view as an alternative to the commonly employed short-axis cross-section view for internal jugular vein access and cannulation. The long-axis ultrasound-guided internal jugular vein approach for internal jugular vein cannulation is a useful alternative technique that can provide better needle tip and guidewire visualization than the more traditional short-axis ultrasound view.

Multi-Scale Low-Entropy Method for Optimizing the Processing Parameters during Automated Fiber Placement

PubMed Central

Han, Zhenyu; Sun, Shouzheng; Fu, Hongya; Fu, Yunzhong

2017-01-01

Automated fiber placement (AFP) process includes a variety of energy forms and multi-scale effects. This contribution proposes a novel multi-scale low-entropy method aiming at optimizing processing parameters in an AFP process, where multi-scale effect, energy consumption, energy utilization efficiency and mechanical properties of micro-system could be taken into account synthetically. Taking a carbon fiber/epoxy prepreg as an example, mechanical properties of macro–meso–scale are obtained by Finite Element Method (FEM). A multi-scale energy transfer model is then established to input the macroscopic results into the microscopic system as its boundary condition, which can communicate with different scales. Furthermore, microscopic characteristics, mainly micro-scale adsorption energy, diffusion coefficient entropy–enthalpy values, are calculated under different processing parameters based on molecular dynamics method. Low-entropy region is then obtained in terms of the interrelation among entropy–enthalpy values, microscopic mechanical properties (interface adsorbability and matrix fluidity) and processing parameters to guarantee better fluidity, stronger adsorption, lower energy consumption and higher energy quality collaboratively. Finally, nine groups of experiments are carried out to verify the validity of the simulation results. The results show that the low-entropy optimization method can reduce void content effectively, and further improve the mechanical properties of laminates. PMID:28869520

Multi-Scale Low-Entropy Method for Optimizing the Processing Parameters during Automated Fiber Placement.

PubMed

Han, Zhenyu; Sun, Shouzheng; Fu, Hongya; Fu, Yunzhong

2017-09-03

Automated fiber placement (AFP) process includes a variety of energy forms and multi-scale effects. This contribution proposes a novel multi-scale low-entropy method aiming at optimizing processing parameters in an AFP process, where multi-scale effect, energy consumption, energy utilization efficiency and mechanical properties of micro-system could be taken into account synthetically. Taking a carbon fiber/epoxy prepreg as an example, mechanical properties of macro-meso-scale are obtained by Finite Element Method (FEM). A multi-scale energy transfer model is then established to input the macroscopic results into the microscopic system as its boundary condition, which can communicate with different scales. Furthermore, microscopic characteristics, mainly micro-scale adsorption energy, diffusion coefficient entropy-enthalpy values, are calculated under different processing parameters based on molecular dynamics method. Low-entropy region is then obtained in terms of the interrelation among entropy-enthalpy values, microscopic mechanical properties (interface adsorbability and matrix fluidity) and processing parameters to guarantee better fluidity, stronger adsorption, lower energy consumption and higher energy quality collaboratively. Finally, nine groups of experiments are carried out to verify the validity of the simulation results. The results show that the low-entropy optimization method can reduce void content effectively, and further improve the mechanical properties of laminates.

Poisons Implicated In Homicidal, Suicidal And Accidental Cases In North-West Pakistan.

PubMed

Jan, Adil; Khan, Muhammad Jaffar; Humayun Khan, Muhammad Tariq; Masood Khan, Muhammad Tariq; Fatima, Sadia

2016-01-01

Pakistan has one of the highest prevalence of poisoning in the world. However, limited data exist on the frequency of poisons implicated in homicidal, suicidal, and accidental cases in North-West Pakistan (Khyber Pakhtunkhwa). This retrospective study of 353 cases and biological specimens of poisoning received at the department of Forensic medicine and toxicology, Khyber Medical College Peshawar from 13 districts of Khyber Pakhtunkhwa. Frequency of poisoning was assessed by testing each specimen for 17 different poisons. Of all the specimens, 250 (70.8%) specimens tested positive and the rest didn't show any indication of poisoning (n=103, 29.2%). The most frequent poisons detected were benzodiazepines (total n=75), organophosphates (total n=58), phencyclidine (total n=30) and morphine (total n=23). Gender had a significant association with benzodiazepines (p=0.011), tricyclic antidepressants (p=0.001), and organophosphates (p<0.001). Organophosphates were the most common cause of poisoning in females while benzodiazepines were the most common cause of poisoning in males. Poisoning by benzodiazepines, organophosphates and phencyclidine are the most common causes of intoxication in population of Khyber Pakhtunkhwa. Source of poisoning varies with gender for organophosphates, benzodiazepines and tricyclic antidepressants.

Use of diagnosis codes for detection of clinically significant opioid poisoning in the emergency department: A retrospective analysis of a surveillance case definition.

PubMed

Reardon, Joseph M; Harmon, Katherine J; Schult, Genevieve C; Staton, Catherine A; Waller, Anna E

2016-02-08

Although fatal opioid poisonings tripled from 1999 to 2008, data describing nonfatal poisonings are rare. Public health authorities are in need of tools to track opioid poisonings in near real time. We determined the utility of ICD-9-CM diagnosis codes for identifying clinically significant opioid poisonings in a state-wide emergency department (ED) surveillance system. We sampled visits from four hospitals from July 2009 to June 2012 with diagnosis codes of 965.00, 965.01, 965.02 and 965.09 (poisoning by opiates and related narcotics) and/or an external cause of injury code of E850.0-E850.2 (accidental poisoning by opiates and related narcotics), and developed a novel case definition to determine in which cases opioid poisoning prompted the ED visit. We calculated the percentage of visits coded for opioid poisoning that were clinically significant and compared it to the percentage of visits coded for poisoning by non-opioid agents in which there was actually poisoning by an opioid agent. We created a multivariate regression model to determine if other collected triage data can improve the positive predictive value of diagnosis codes alone for detecting clinically significant opioid poisoning. 70.1 % of visits (Standard Error 2.4 %) coded for opioid poisoning were primarily prompted by opioid poisoning. The remainder of visits represented opioid exposure in the setting of other primary diseases. Among non-opioid poisoning codes reviewed, up to 36 % were reclassified as an opioid poisoning. In multivariate analysis, only naloxone use improved the positive predictive value of ICD-9-CM codes for identifying clinically significant opioid poisoning, but was associated with a high false negative rate. This surveillance mechanism identifies many clinically significant opioid overdoses with a high positive predictive value. With further validation, it may help target control measures such as prescriber education and pharmacy monitoring.

Determination of anatomic landmarks for optimal placement in captive-bolt euthanasia of goats.

PubMed

Plummer, Paul J; Shearer, Jan K; Kleinhenz, Katie E; Shearer, Leslie C

2018-03-01

OBJECTIVE To determine the optimal anatomic site and directional aim of a penetrating captive bolt (PCB) for euthanasia of goats. SAMPLE 8 skulls from horned and polled goat cadavers and 10 anesthetized horned and polled goats scheduled to be euthanized at the end of a teaching laboratory. PROCEDURES Sagittal sections of cadaver skulls from 8 horned and polled goats were used to determine the ideal anatomic site and aiming of a PCB to maximize damage to the midbrain region of the brainstem for euthanasia. Anatomic sites for ideal placement and directional aiming were confirmed by use of 10 anesthetized horned and polled goats. RESULTS Clinical observation and postmortem examination of the sagittal sections of skulls from the 10 anesthetized goats that were euthanized confirmed that perpendicular placement and firing of a PCB at the intersection of 2 lines, each drawn from the lateral canthus of 1 eye to the middle of the base of the opposite ear, resulted in consistent disruption of the midbrain and thalamus in all goats. Immediate cessation of breathing, followed by a loss of heartbeat in all 10 of the anesthetized goats, confirmed that use of this site consistently resulted in effective euthanasia. CONCLUSIONS AND CLINICAL RELEVANCE Damage to the brainstem and key adjacent structures may be accomplished by firing a PCB perpendicular to the skull over the anatomic site identified at the intersection of 2 lines, each drawn from the lateral canthus of 1 eye to the middle of the base of the opposite ear.

Brain cholinesterase reactivation as a marker of exposure to anticholinesterase pesticides: a case study in a population of yellow-legged gull Larus michahellis (Naumann, 1840) along the northern coast of Portugal.

PubMed

Santos, Cátia S A; Monteiro, Marta S; Soares, Amadeu M V M; Loureiro, Susana

2016-01-01

Between late 2010 to early 2011, an increased mortality in gulls was observed along the northern coast of Portugal, with individuals exhibiting neurologic disorders consistent with an eventual anticholinesterase pesticide poisoning event. To clarify if this mortality was related to organophosphate (OP) and/or carbamate (CB) poisoning, chemical and spontaneous cholinesterase (ChE) reactivation was tested in the brain of the yellow-legged gull (Larus michahellis). Initial brain ChE activity in L. michahellis was 40.92 ± 5.23 U/mg of protein (average ± SE). Following chemical and spontaneous reactivation, ChE activity increased in average 70.38 ± 48.59% and 131.95 ± 92.64%, respectively. ChE reactivation was found to decrease at increasing concentrations of the oxime pyridine-2-aldoxime methochloride and dilution factor, underscoring the importance of first optimizing the assay conditions prior to its use on bird species. These results suggest that birds analysed could have been exposed to OP and CB pesticide compounds and that in most cases CB exposure appeared to be the main cause of birds poisoning. These results are an important contribution to environmental monitoring as it demonstrates the suitability of L. michaellis as sentinel species of OP and CB pesticides within an urban environment.

Regeneration and sulfur poisoning behavior of In/H-BEA catalyst for NOx reduction by CH4

NASA Astrophysics Data System (ADS)

Pan, Hua; Jian, Yanfei; Yu, Yanke; He, Chi; Shen, Zhenxing; Liu, Hongxia

2017-04-01

Sulfur poisoning and regeneration behavior of In/H-BEA catalyst were carried out in NOx reduction by CH4. In/H-BEA catalyst exhibited a poor resistance to sulfur dioxide after addition of 200 ppm SO2 and 10 vol.% H2O into NO reduction with CH4 at 450 °C for 45 h. Sulfur poisoning of In/H-BEA was attributed to the inhibition of NOx adsorption on Brønsted acid sites, suppression of reaction intermediates generation on the active sites, and the formation of surface sulfate species. The formation of surface sulfate reduced the availability of surface active sites, blocked the pore structure and decreased the surface area of catalyst. These changes in chemical and textural properties resulted in a severe loss in the activity of sulfated In/H-BEA catalyst for NO reduction with CH4. H2 reduction is a promising technology for regeneration of In/H-BEA deactivated by SO2 for removing NOx from lean-burn and diesel exhausts. Indium sulfate could be reduced by H2 to InO+ with In2O3 and In(OH)2+ as the intermediates. The optimal parameters of H2 reduction was regeneration temperature of 400 °C and regeneration time of 60 min which completely recovered the catalytic activity of In/H-BEA.

Visually guided tube thoracostomy insertion comparison to standard of care in a large animal model.

PubMed

Hernandez, Matthew C; Vogelsang, David; Anderson, Jeff R; Thiels, Cornelius A; Beilman, Gregory; Zielinski, Martin D; Aho, Johnathon M

2017-04-01

Tube thoracostomy (TT) is a lifesaving procedure for a variety of thoracic pathologies. The most commonly utilized method for placement involves open dissection and blind insertion. Image guided placement is commonly utilized but is limited by an inability to see distal placement location. Unfortunately, TT is not without complications. We aim to demonstrate the feasibility of a disposable device to allow for visually directed TT placement compared to the standard of care in a large animal model. Three swine were sequentially orotracheally intubated and anesthetized. TT was conducted utilizing a novel visualization device, tube thoracostomy visual trocar (TTVT) and standard of care (open technique). Position of the TT in the chest cavity were recorded using direct thoracoscopic inspection and radiographic imaging with the operator blinded to results. Complications were evaluated using a validated complication grading system. Standard descriptive statistical analyses were performed. Thirty TT were placed, 15 using TTVT technique, 15 using standard of care open technique. All of the TT placed using TTVT were without complication and in optimal position. Conversely, 27% of TT placed using standard of care open technique resulted in complications. Necropsy revealed no injury to intrathoracic organs. Visual directed TT placement using TTVT is feasible and non-inferior to the standard of care in a large animal model. This improvement in instrumentation has the potential to greatly improve the safety of TT. Further study in humans is required. Therapeutic Level II. Copyright © 2017 Elsevier Ltd. All rights reserved.

Physical-level synthesis for digital lab-on-a-chip considering variation, contamination, and defect.

PubMed

Liao, Chen; Hu, Shiyan

2014-03-01

Microfluidic lab-on-a-chips have been widely utilized in biochemical analysis and human health studies due to high detection accuracy, high timing efficiency, and low cost. The increasing design complexity of lab-on-a-chips necessitates the computer-aided design (CAD) methodology in contrast to the classical manual design methodology. A key part in lab-on-a-chip CAD is physical-level synthesis. It includes the lab-on-a-chip placement and routing, where placement is to determine the physical location and the starting time of each operation and routing is to transport each droplet from the source to the destination. In the lab-on-a-chip design, variation, contamination, and defect need to be considered. This work designs a physical-level synthesis flow which simultaneously considers variation, contamination, and defect of the lab-on-a-chip design. It proposes a maze routing based, variation, contamination, and defect aware droplet routing technique, which is seamlessly integrated into an existing placement technique. The proposed technique improves the placement solution for routing and achieves the placement and routing co-optimization to handle variation, contamination, and defect. The simulation results demonstrate that our technique does not use any defective/contaminated grids, while the technique without considering contamination and defect uses 17.0% of the defective/contaminated grids on average. In addition, our routing variation aware technique significantly improves the average routing yield by 51.2% with only 3.5% increase in completion time compared to a routing variation unaware technique.

Optimising crime scene temperature collection for forensic entomology casework.

PubMed

Hofer, Ines M J; Hart, Andrew J; Martín-Vega, Daniel; Hall, Martin J R

2017-01-01

The value of minimum post-mortem interval (minPMI) estimations in suspicious death investigations from insect evidence using temperature modelling is indisputable. In order to investigate the reliability of the collected temperature data used for modelling minPMI, it is necessary to study the effects of data logger location on the accuracy and precision of measurements. Digital data logging devices are the most commonly used temperature measuring devices in forensic entomology, however, the relationship between ambient temperatures (measured by loggers) and body temperatures has been little studied. The placement of loggers in this study in three locations (two outdoors, one indoors) had measurable effects when compared with actual body temperature measurements (simulated with pig heads), some more significant than others depending on season, exposure to the environment and logger location. Overall, the study demonstrated the complexity of the question of optimal logger placement at a crime scene and the potential impact of inaccurate temperature data on minPMI estimations, showing the importance of further research in this area and development of a standard protocol. Initial recommendations are provided for data logger placement (within a Stevenson Screen where practical), situations to avoid (e.g. placement of logger in front of windows when measuring indoor temperatures), and a baseline for further research into producing standard guidelines for logger placement, to increase the accuracy of minPMI estimations and, thereby, the reliability of forensic entomology evidence in court. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Experience in estimating neutron poison worths

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiang, R.T.; Congdon, S.P.

1989-01-01

Gadolinia, {sup 135}Xe, {sup 149}Sm, control rod, and soluble boron are five neutron poisons that may appear in light water reactor assemblies. Reliable neutron poison worth estimation is useful for evaluating core operating strategies, fuel cycle economics, and reactor safety design. Based on physical presence, neutron poisons can be divided into two categories: local poisons and global poisons. Gadolinia and control rod are local poisons, and {sup 135}Xe, {sup 149}Sm, and soluble boron are global poisons. The first-order perturbation method is commonly used to estimate nuclide worths in fuel assemblies. It is well known, however, that the first-order perturbation methodmore » was developed for small perturbations, such as the perturbation due to weak absorbers, and that neutron poisons are not weak absorbers. The authors have developed an improved method to replace the first-order perturbation method, which yields very poor results, for estimating local poison worths. It has also been shown that the first-order perturbation method seems adequate to estimate worths for global poisons caused by flux compensation.« less

Cardiovascular Abnormalities in Carbon Monoxide Poisoning.

PubMed

Garg, Jalaj; Krishnamoorthy, Parasuram; Palaniswamy, Chandrasekar; Khera, Sahil; Ahmad, Hasan; Jain, Diwakar; Aronow, Wilbert S; Frishman, William H

Acute carbon monoxide (CO) poisoning is the most common cause of poisoning and poisoning-related death in the United States. It manifests as broad spectrum of symptoms ranging from mild headache, nausea, and fatigue to dizziness, syncope, coma, seizures resulting in cardiovascular collapse, respiratory failure, and death. Cardiovascular complications of CO poisoning has been well reported and include myocardial stunning, left ventricular dysfunction, pulmonary edema, and arrhythmias. Acute myocardial ischemia has also been reported from increased thrombogenicity due to CO poisoning. Myocardial toxicity from CO exposure is associated with increased short-term and long-term mortality. Carboxyhemoglobin (COHb) levels do not correlate well with the clinical severity of CO poisoning. Supplemental oxygen remains the cornerstone of therapy for CO poisoning. Hyperbaric oxygen therapy increases CO elimination and has been used with wide variability in patients with evidence of neurological and myocardial injury from CO poisoning, but its benefit in limiting or reversing cardiac injury is unknown. We present a comprehensive review of literature on cardiovascular manifestations of CO poisoning and propose a diagnostic algorithm for managing patients with CO poisoning.

On-Orbit Range Set Applications

NASA Astrophysics Data System (ADS)

Holzinger, M.; Scheeres, D.

2011-09-01

History and methodology of Δv range set computation is briefly reviewed, followed by a short summary of the Δv optimal spacecraft servicing problem literature. Service vehicle placement is approached from a Δv range set viewpoint, providing a framework under which the analysis becomes quite geometric and intuitive. The optimal servicing tour design problem is shown to be a specific instantiation of the metric- Traveling Salesman Problem (TSP), which in general is an NP-hard problem. The Δv-TSP is argued to be quite similar to the Euclidean-TSP, for which approximate optimal solutions may be found in polynomial time. Applications of range sets are demonstrated using analytical and simulation results.

Optimal Product Placement.

PubMed

Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

2017-01-01

We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

Linear quadratic regulators with eigenvalue placement in a specified region

NASA Technical Reports Server (NTRS)

Shieh, Leang S.; Dib, Hani M.; Ganesan, Sekar

1988-01-01

A linear optimal quadratic regulator is developed for optimally placing the closed-loop poles of multivariable continuous-time systems within the common region of an open sector, bounded by lines inclined at + or - pi/2k (k = 2 or 3) from the negative real axis with a sector angle of pi/2 or less, and the left-hand side of a line parallel to the imaginary axis in the complex s-plane. The design method is mainly based on the solution of a linear matrix Liapunov equation, and the resultant closed-loop system with its eigenvalues in the desired region is optimal with respect to a quadratic performance index.

A pilot study of the utility of a laboratory-based spinal fixation training program for neurosurgical residents.

PubMed

Sundar, Swetha J; Healy, Andrew T; Kshettry, Varun R; Mroz, Thomas E; Schlenk, Richard; Benzel, Edward C

2016-05-01

OBJECTIVE Pedicle and lateral mass screw placement is technically demanding due to complex 3D spinal anatomy that is not easily visualized. Neurosurgical and orthopedic surgery residents must be properly trained in such procedures, which can be associated with significant complications and associated morbidity. Current training in pedicle and lateral mass screw placement involves didactic teaching and supervised placement in the operating room. The objective of this study was to assess whether teaching residents to place pedicle and lateral mass screws using navigation software, combined with practice using cadaveric specimens and Sawbones models, would improve screw placement accuracy. METHODS This was a single-blinded, prospective, randomized pilot study with 8 junior neurosurgical residents and 2 senior medical students with prior neurosurgery exposure. Both the study group and the level of training-matched control group (each group with 4 level of training-matched residents and 1 senior medical student) were exposed to a standardized didactic education regarding spinal anatomy and screw placement techniques. The study group was exposed to an additional pilot program that included a training session using navigation software combined with cadaveric specimens and accessibility to Sawbones models. RESULTS A statistically significant reduction in overall surgical error was observed in the study group compared with the control group (p = 0.04). Analysis by spinal region demonstrated a significant reduction in surgical error in the thoracic and lumbar regions in the study group compared with controls (p = 0.02 and p = 0.04, respectively). The study group also was observed to place screws more optimally in the cervical, thoracic, and lumbar regions (p = 0.02, p = 0.04, and p = 0.04, respectively). CONCLUSIONS Surgical resident education in pedicle and lateral mass screw placement is a priority for training programs. This study demonstrated that compared with a didactic-only training model, using navigation simulation with cadavers and Sawbones models significantly reduced the number of screw placement errors in a laboratory setting.

The pattern of acute poisoning in a teaching hospital, north-west Ethiopia.

PubMed

Abula, Teferra; Wondmikun, Yared

2006-04-01

Poisoning by means of hazardous chemicals through ignorance, mishap or intentionally is becoming a serious health problem worldwide. Epidemiological data on this important health issue are, however, scarce in Ethiopia. The purpose of this study is to assess the pattern of acute poisonings and determine the approaches employed for the management of poisoning. The medical records of patients with acute poisonings presented to the Gondar University hospital between July 2001 and June 2004 were reviewed retrospectively. One hundred and two patients presenting to the emergency department of the hospital were due to acute poisoning; accounting for about 0.45% of emergency room admissions. Organophosphates, rat poison and alcohol were the commonly encountered poisoning agents (in about 70% of cases) mainly in adults possibly with suicidal or para-suicidal intention. The approaches employed in the management of poisoning mainly involved gastrointestinal decontamination procedures. Specific antidotes were used in a substantial number of patients. The fatality rate was 2.4%. Poisoning with suicidal intention is becoming a serious health problem particularly in adults. Pesticides are commonly used toxicants. The approaches in the management of poisoning are justifiable in some cases. However, much is to be done to improve the recording of patient-related information and record-keeping processes. Further large scale studies are required to investigate national trends of poisoning and factors associated with poisoning.

Prevention of Food Poisoning.

ERIC Educational Resources Information Center

Army Quartermaster School, Ft. Lee, VA.

The programed text provides a single lesson, four-hour, correspondence subcourse on the prevention of food poisoning. It covers the following areas: a definition of food poisoning; chemical food poisoning; biological food poisoning; causes and prevention of trichinosis; six factors controlling bacteria growth; bacterial infection; prevention of…

16 CFR 1700.15 - Poison prevention packaging standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

16 CFR 1700.15 - Poison prevention packaging standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

16 CFR 1700.15 - Poison prevention packaging standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

16 CFR 1700.15 - Poison prevention packaging standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

A Heuristic Placement Selection of Live Virtual Machine Migration for Energy-Saving in Cloud Computing Environment

PubMed Central

Zhao, Jia; Hu, Liang; Ding, Yan; Xu, Gaochao; Hu, Ming

2014-01-01

The field of live VM (virtual machine) migration has been a hotspot problem in green cloud computing. Live VM migration problem is divided into two research aspects: live VM migration mechanism and live VM migration policy. In the meanwhile, with the development of energy-aware computing, we have focused on the VM placement selection of live migration, namely live VM migration policy for energy saving. In this paper, a novel heuristic approach PS-ES is presented. Its main idea includes two parts. One is that it combines the PSO (particle swarm optimization) idea with the SA (simulated annealing) idea to achieve an improved PSO-based approach with the better global search's ability. The other one is that it uses the Probability Theory and Mathematical Statistics and once again utilizes the SA idea to deal with the data obtained from the improved PSO-based process to get the final solution. And thus the whole approach achieves a long-term optimization for energy saving as it has considered not only the optimization of the current problem scenario but also that of the future problem. The experimental results demonstrate that PS-ES evidently reduces the total incremental energy consumption and better protects the performance of VM running and migrating compared with randomly migrating and optimally migrating. As a result, the proposed PS-ES approach has capabilities to make the result of live VM migration events more high-effective and valuable. PMID:25251339

A heuristic placement selection of live virtual machine migration for energy-saving in cloud computing environment.

PubMed

Zhao, Jia; Hu, Liang; Ding, Yan; Xu, Gaochao; Hu, Ming

2014-01-01

The field of live VM (virtual machine) migration has been a hotspot problem in green cloud computing. Live VM migration problem is divided into two research aspects: live VM migration mechanism and live VM migration policy. In the meanwhile, with the development of energy-aware computing, we have focused on the VM placement selection of live migration, namely live VM migration policy for energy saving. In this paper, a novel heuristic approach PS-ES is presented. Its main idea includes two parts. One is that it combines the PSO (particle swarm optimization) idea with the SA (simulated annealing) idea to achieve an improved PSO-based approach with the better global search's ability. The other one is that it uses the Probability Theory and Mathematical Statistics and once again utilizes the SA idea to deal with the data obtained from the improved PSO-based process to get the final solution. And thus the whole approach achieves a long-term optimization for energy saving as it has considered not only the optimization of the current problem scenario but also that of the future problem. The experimental results demonstrate that PS-ES evidently reduces the total incremental energy consumption and better protects the performance of VM running and migrating compared with randomly migrating and optimally migrating. As a result, the proposed PS-ES approach has capabilities to make the result of live VM migration events more high-effective and valuable.

Changing epidemiologic patterns of deliberate self poisoning in a rural district of Sri Lanka

PubMed Central

2012-01-01

Background Acute poisoning is a major public health issue in many parts of the world. The epidemiology and the mortality rate is higher in low and middle income countries, including Sri Lanka. The aim of this study was to provide details about the epidemiology of acute poisoning in a rural Sri Lankan district and to identify the changing patterns and epidemiology of poisoning. Methods A prospective study was conducted from September 2008 to January 2010 in all hospitals with inpatient facilities in Anuradhapura district of North Central Province of Sri Lanka. Acute poisoning data was extracted from patient charts. Selected data were compared to the data collected from a 2005 study in 28 hospitals. Results There were 3813 poisoned patients admitted to the hospitals in the Anuradhapura district over 17 months. The annual population incidence was 447 poisoning cases per 100,000 population. The total number of male and female patients was approximately similar, but the age distribution differed by gender. There was a very high incidence of poisoning in females aged 15–19, with an estimated cumulative incidence of 6% over these five years. Although, pesticides are still the most common type of poison, medicinal drug poisonings are now 21% of the total and have increased 1.6 fold since 2005. Conclusions Acute poisoning remains a major public health problem in rural Sri Lanka and pesticide poisoning remains the most important poison. However, cases of medicinal drug poisoning have recently dramatically increased. Youth in these rural communities remain very vulnerable to acute poisoning and the problem is so common that school-based primary prevention programs may be worthwhile. Lalith Senarathna, Shaluka F Jayamanna, Patrick J Kelly, Nick A Buckley,michael J Dibley, Andrew H Dawson. These authors contributed equally to this work. PMID:22852867

Changing epidemiologic patterns of deliberate self poisoning in a rural district of Sri Lanka.

PubMed

Senarathna, Lalith; Jayamanna, Shaluka F; Kelly, Patrick J; Buckley, Nick A; Dibley, Michael J; Dawson, Andrew H

2012-08-02

Acute poisoning is a major public health issue in many parts of the world. The epidemiology and the mortality rate is higher in low and middle income countries, including Sri Lanka. The aim of this study was to provide details about the epidemiology of acute poisoning in a rural Sri Lankan district and to identify the changing patterns and epidemiology of poisoning. A prospective study was conducted from September 2008 to January 2010 in all hospitals with inpatient facilities in Anuradhapura district of North Central Province of Sri Lanka. Acute poisoning data was extracted from patient charts. Selected data were compared to the data collected from a 2005 study in 28 hospitals. There were 3813 poisoned patients admitted to the hospitals in the Anuradhapura district over 17 months. The annual population incidence was 447 poisoning cases per 100,000 population. The total number of male and female patients was approximately similar, but the age distribution differed by gender. There was a very high incidence of poisoning in females aged 15-19, with an estimated cumulative incidence of 6% over these five years. Although, pesticides are still the most common type of poison, medicinal drug poisonings are now 21% of the total and have increased 1.6 fold since 2005. Acute poisoning remains a major public health problem in rural Sri Lanka and pesticide poisoning remains the most important poison. However, cases of medicinal drug poisoning have recently dramatically increased. Youth in these rural communities remain very vulnerable to acute poisoning and the problem is so common that school-based primary prevention programs may be worthwhile.Lalith Senarathna, Shaluka F Jayamanna, Patrick J Kelly, Nick A Buckley,michael J Dibley, Andrew H Dawson. These authors contributed equally to this work.

[An analysis of the clinical and epidemiological characteristics of acute poisoning patients in a general hospital].

PubMed

Hou, Y H; Zhao, Q; Wu, Y X; Hu, T T; Chen, Y; You, Y T; Kang, X W; Hong, G L; Lu, Z Q

2016-07-20

Objective: To analyze the clinical and epidemiological characteristics of acute poisoning patients in a general hospital, then to provide a reference for the prevention and treatment of acute poisoning in the future. Methods: A retrospective analysis was made on the clinical data of 660 patients with acute poisoning admitted in emergency medical center of the First Affiliated Hospital of Wenzhou Medical University from July 2009 to May 2015. Results: More men than women in 660 cases with acute poisoning(the ratio of male to female was 1.36∶1) ; ≥30 years old was the high incidence age (78.79%) ; The top occupation was farmers (39.70%) ; Most were life poisoning (88.18%) , suicide was the main reason (62.42%) especially happened in women, and the main cause of suicide was family conflicts; Toxic species dominated by pesticide (67.58%) , most were severe poisoning (81.82%) ; The top two pesticide poisoning were organic phosphorus and paraquat, and the proportion of blood purification in paraquat was significantly higher (χ 2 =105.21, P =0.00) ; There were 212 cases with organ dysfunction, main were pesticide poisoning patients, and the proportionof organ dysfunction in paraquat was significantly higher than the rest allpesticide poisoning (χ 2 =45.09, P =0.00) ; The general fatal rate of acute poisoning was 2.27%, and the proportion in paraquat poisoning was .higher than the rest pesticide poisoning who were death and give up when discharged (χ 2 =56.83, P =0.00) . Conclusion: The focus of acute poisoning in the general hospital is still pesticide (especially organic phosphorus and paraquat) , and most were severe poisoning.

[Development and application of poison databank and poisonous animal and plants sample databank].

PubMed

Yin, Yu; Jiang, Shao-Feng; Cai, Jun; Luo, Tao; Xie, Li-Jing; Zhou, Jing; Sun, Cheng-Ye

2008-03-01

To establish a comprehensive,easily approached, operated, and searched internet poison databank as to providing professional poison data and knowledge of effective treatment for those consented such as medical staff, and emergency response team in the shortest time. We established a computer poison databank, by adopting B/S structure, using SQL Server databank, and explore technology, in which all information may easily be explored and obtained by users. The database integrated the information in relating to the substances identifiers, physical and chemical properties, toxicology data, clinical manifestation while intoxication, emergency response guides, effective treatment, anything related to the special antidotes, preventive measures, poison analysis, and manufacturers of chemicals, pharmaceuticals, herbs, pesticides, animal, plant, bacteria, fungi, productions and toxins. Otherwise some information about poison control organizations and experts, literatures about poison case reports, poison incidents, were also involved in the system, which can also provide a shortcut, convenient, and exact search. The databank might be easily used on several fields, providing important information with acute poison incidents disposal and clinic treatment.

Multiobjective Particle Swarm Optimization for the optimal design of photovoltaic grid-connected systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kornelakis, Aris

2010-12-15

Particle Swarm Optimization (PSO) is a highly efficient evolutionary optimization algorithm. In this paper a multiobjective optimization algorithm based on PSO applied to the optimal design of photovoltaic grid-connected systems (PVGCSs) is presented. The proposed methodology intends to suggest the optimal number of system devices and the optimal PV module installation details, such that the economic and environmental benefits achieved during the system's operational lifetime period are both maximized. The objective function describing the economic benefit of the proposed optimization process is the lifetime system's total net profit which is calculated according to the method of the Net Present Valuemore » (NPV). The second objective function, which corresponds to the environmental benefit, equals to the pollutant gas emissions avoided due to the use of the PVGCS. The optimization's decision variables are the optimal number of the PV modules, the PV modules optimal tilt angle, the optimal placement of the PV modules within the available installation area and the optimal distribution of the PV modules among the DC/AC converters. (author)« less

Evaluation of HFIR LEU Fuel Using the COMSOL Multiphysics Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Primm, Trent; Ruggles, Arthur; Freels, James D

2009-03-01

A finite element computational approach to simulation of the High Flux Isotope Reactor (HFIR) Core Thermal-Fluid behavior is developed. These models were developed to facilitate design of a low enriched core for the HFIR, which will have different axial and radial flux profiles from the current HEU core and thus will require fuel and poison load optimization. This report outlines a stepwise implementation of this modeling approach using the commercial finite element code, COMSOL, with initial assessment of fuel, poison and clad conduction modeling capability, followed by assessment of mating of the fuel conduction models to a one dimensional fluidmore » model typical of legacy simulation techniques for the HFIR core. The model is then extended to fully couple 2-dimensional conduction in the fuel to a 2-dimensional thermo-fluid model of the coolant for a HFIR core cooling sub-channel with additional assessment of simulation outcomes. Finally, 3-dimensional simulations of a fuel plate and cooling channel are presented.« less

Prevention of poison ivy and poison oak allergic contact dermatitis by quaternium-18 bentonite.

PubMed

Marks, J G; Fowler, J F; Sheretz, E F; Rietschel, R L

1995-08-01

Poison ivy and poison oak are the most common causes of allergic contact dermatitis in North America. We investigated whether a new topical lotion containing 5% quaternium-18 bentonite prevents experimentally induced poison ivy and poison oak allergic contact dermatitis. A single-blind, paired comparison, randomized, multicenter investigation was used to evaluate the effectiveness and safety of quaternium-18 bentonite lotion in preventing experimentally induced poison ivy and poison oak allergic contact dermatitis in susceptible volunteers. One hour before both forearms were patch tested with urushiol, the allergenic resin from poison ivy and poison oak, 5% quaternium-18 bentonite lotion was applied on one forearm. The test patches were removed after 4 hours and the sites interpreted for reaction 2, 5, and 8 days later. The difference in reactions between treated and untreated patch test sites was statistically analyzed. Two hundred eleven subjects with a history of allergic contact dermatitis to poison ivy and poison oak were studied. One hundred forty-four subjects had positive reactions to urushiol. The test sites pretreated with quaternium-18 bentonite lotion had absent or significantly reduced reactions to the urushiol compared with untreated control sites (p < 0.0001) on all test days. When it occurred, the reaction consistently appeared later on treated than on control sites (p < 0.0001). One occurrence of mild, transient erythema at the application site was the only side effect from the quaternium-18 bentonite lotion. Quaternium-18 bentonite lotion was effective in preventing or diminishing experimentally produced poison ivy and poison oak allergic contact dermatitis.

[Characterization of severe acute occupational poisoning accidents in China between 1989 and 2003].

PubMed

Zhang, Min; Li, Tao; Wang, Huan-Qiang; Wang, Hong-Fei; Chen, Shu-Yang; Du, Xie-Yi; Zhang, Shuang; Qin, Jian

2006-12-01

To analyze severe acute occupational poisoning accidents reported in China between 1989 and 2003, and to study the characteristics of severe acute occupational poisoning accidents and provide scientific evidences for prevention and control strategies. The data from the national occupational poisoning case reporting system were analyzed with descriptive methods. (1) There were 506 acute severe occupational poisoning accidents for 15 years with 4 657 workers poisoned. The total poisoning rate was 54.8%, and the total mortality was 16.5%. The average poisoning age was (31.9 +/- 9.8) years old and the average death age was (33.7 +/- 10.3) years old. The poisoning accidents occurred more in men than in women. (2) There were more than 112 chemicals which caused these poisoning accidents. Most of the accidents caused by hydrogen sulfide, carbon monoxide, benzene and homologs, metal and metalloid and carbon dioxide, and the types of chemicals varied in different types of industries. (3) The accidents mainly occurred in chemical industry, manufacture, water disposal industry, mining and construction industry, and the risk was higher in some jobs than others, such as cleanout, machine maintenance and repair, production, mine and digging. The accidents occurred more frequently from April to August each year. (1) The control over the severe acute occupational poisoning is urgent. (2) The trend of the characteristics of severe acute occupational poisoning accidents is centralized in the high risk industries, poisons and jobs. (3) The characteristics of the accidents varied in different types of industries. (4) It is the key point to strengthen the supervision on poisoning.

Catheter placement for lysis of spontaneous intracerebral hematomas: is a navigated stylet better than pointer-guided frameless stereotaxy for intrahematomal catheter positioning?

PubMed

Malinova, Vesna; Stockhammer, Florian; Atangana, Etienne Ndzie; Mielke, Dorothee; Rohde, Veit

2014-06-01

The optimal management of spontaneous intracerebral hemorrhage (ICH), especially if deep-seated, remains a matter of discussion. Lysis of the blood clot applying recombinant tissue-type plasminogen activator (rtPA) by an intrahematomal catheter is a minimally invasive treatment option, currently being under investigation in a randomized trial. The center position of the catheter in the hematoma is believed to be crucial for an optimal clot lysis. To achieve this objective, frame-based stereotaxy and frameless stereotaxy with guidance of an articulated arm were used. Recently, a preregistered stylet for direct navigation, alleviating the need of guidance, became available. In this study, we evaluated the relative error (RE) describing the deviation of the catheter from the ideal center position in the clot and compared the accuracy of catheter placement using frameless stereotaxy or the novel preregistered stylet. The intrahematomal catheter position was evaluated in three dimensions in 89 patients with spontaneous supratentorial ICH. Frameless stereotaxy with guidance of an articulated arm was performed in 50 patients. The preregistered stylet was used in 39 patients. The catheter position was evaluated using a RE calculating the distance perpendicular to the center of the catheter in relation to the hematoma's diameter. The mean hematoma volume was 51.4 ml. Forty-four out of 89 hematomas were deep-seated. Intraventricular blood was found in 59 patients. The RE of the catheter position was lower in the stylet group in comparison to the frameless stereotaxy group (mean 0.57 vs. 0.90; p = 0.0018). There was no difference between deep-seated and lobar hematomas with regard to the accuracy of catheter placement (p = 0.62). The RE is a robust measure for describing intrahematomal catheter position. The preregistered stylet facilitates a satisfactory catheter placement and is a viable alternative to frameless stereotaxy and guidance with the articulated arm.

Material quality development during the automated tow placement process

NASA Astrophysics Data System (ADS)

Tierney, John Joseph

Automated tow placement (ATP) of thermoplastic composites builds on the existing industrial base for equipment, robotics and kinematic placement of material with the aim of further cost reduction by eliminating the autoclave entirely. During ATP processing, thermoplastic composite tows are deposited on a preconsolidated substrate at rates ranging from 10--100mm/s and consolidated using the localized application of heat and pressure by a tow placement head mounted on a robot. The process is highly non-isothermal subjecting the material to multiple heating and cooling rates approaching 1000°C/sec. The requirement for the ATP process is to achieve the same quality in seconds (low void content, full translation of mechanical properties and degree of bonding and minimal warpage) as the autoclave process achieves in hours. The scientific challenge was to first understand and then model the relationships between processing, material response, microstructure and quality. The important phenomena affecting quality investigated in this study include a steady state heat transfer simulation, consolidation and deconsolidation (void dynamics), intimate contact and polymer interdiffusion (degree of bonding/mechanical properties) and residual stress and warpage (crystallization and viscoelastic response). A fundamental understanding of the role of materials related to these mechanisms and their relationship to final quality is developed and applied towards a method of process control and optimization.

Successful implant placement in a Case of Florid Cemento-osseous Dysplasia: a case report and literature review.

PubMed

Esfahanizadeh, Nasrin; Yousefi, Hila

2018-02-06

Florid cemento-osseus dysplasia (FCOD) has been described as a reactive process in which normal bone is replaced by fibrous connective tissues and cementum-like materials. Radiographically it appears as dense, lobulated masses, often occurring bilaterally with symmetric involvement. In this case report a successful implant placement has been reported in a 62-year-old Caucasian woman with a chief complaint of mandibular partial edentulous. Radiographic images showed the bilateral radio-opaque lesions in edentulous regions of mandible, and mandibular anterior teeth alike. All mandibular teeth were vital and no root resorption was detected. The findings of X-ray images were attributable to FCOD. A highly conservative step-by-step two-stage implant surgery was performed. After 6 months the implants loaded with fixed prosthesis. 2, 4,6,12 and 18 months after the surgery radiographic images were taken, which revealed an optimal functional rehabilitation and complete integration of implants. This report confirms that treating the edentulous area near the FCOD lesions could be planned, if conservative and step-by-step implant placement been considered. To the best of our knowledge, a case of FCOD with successful implant placement has not been reported previously. More studies in more patients are needed to confirm results of such a therapeutic modality.

Acute poisonings registered since 1970: trends and characteristics. Analysis of the files collected in the National Poison Information Centre, Łódź, Poland.

PubMed

Kotwica, Małgorzata; Czerczak, Sławomir

2007-01-01

The aim of the presented study was to trace the trends and characteristics of acute poisonings in Poland, including the rate, type, and causal agents, over a long period of time (1970-2000) to define the dynamics of changes and major causes of poisoning-related mortality. The analysis was based on the data obtained from the patients' records submitted by all poison centers in Poland (Gdańsk, Kraków, Lublin, Łódź, Poznań, Sosnowiec, Rzeszów, Warszawa, and Wroclaw). Drugs were the most frequent group of chemical substances, responsible for more than 50% of all admissions because of acute poisonings. From 1980, the rate of drug poisonings showed a slightly downward trend from 56.4% in 1980 to 48.8% in 2000. Ranked second with respect to the prevalence rate were alcohol poisonings. A clear upward trend from 8.0% in 1980 to as high as 30.8% in 2000 was noted in this category. Poisonings with carbon monoxide became less frequent, ranging from 15.3 to 5.1%, respectively in the aforesaid years. The percentage of poisonings with pesticides, corrosives and metal compounds have been reduced in recent years. The greatest number of lethal outcomes was also due to poisonings with alcohols and drugs. The highest mortality ratio was recorded for ethylene glycol, methanol and Amanita phalloides poisonings. A constantly growing number of acute poisonings in Poland makes it necessary for all the medical and other professionals involved (clinical toxicologists, diagnostic laboratory staff, and poison information specialists) to enhance and coordinate their efforts. These activities should be focused on: (a) better and faster accessibility of all information on the agent of poisoning, possible health effects, and methods of treatment to support the medical staff; (b) selection of the most effective methods to eliminate poisons from the system and improve further therapy, and (c) better accessibility of antidotes.

Increased risk for hypothyroidism after anticholinesterase pesticide poisoning: a nationwide population-based study.

PubMed

Huang, Hung-Sheng; Lee, Keng-Wei; Ho, Chung-Han; Hsu, Chien-Chin; Su, Shih-Bin; Wang, Jhi-Joung; Lin, Hung-Jung; Huang, Chien-Cheng

2017-09-01

Previous animal studies have reported that acute anticholinesterase pesticide (organophosphate and carbamate) poisoning may affect thyroid hormones. However, there is no human study investigating the association between hypothyroidism and anticholinesterase pesticide poisoning, and therefore, we conducted a retrospective nationwide population-based cohort study to delineate this issue. We identified 10,372 anticholinesterase pesticide poisoning subjects and matched 31,116 non-anticholinesterase pesticide poisoning subjects between 2003 and 2012 from the Nationwide Poisoning Database and the Longitudinal Health Insurance Database 2000, respectively, in a 1:3 ratio by index date, age, and sex for this study. We compared the cumulative incidence of hypothyroidism between the two cohorts by following up until 2013. Independent predictors for hypothyroidism were also investigated. In total, 75 (0.72%) anticholinesterase pesticide poisoning subjects and 184 (0.59%) non-anticholinesterase pesticide poisoning subjects were diagnosed with hypothyroidism during the follow-up. Cox proportional hazard regression analysis showed that anticholinesterase pesticide poisoning subjects had higher risk for hypothyroidism than did non-anticholinesterase pesticide poisoning subjects (adjusted hazard ratio: 1.47, 95% confidence interval: 1.11-1.95) after adjusting for age, sex, hypertension, malignancy, liver disease, renal disease, atrial fibrillation or flutter, thyroiditis, goiter, other endocrine disorders, and mental disorder. Stratified analysis showed that anticholinesterase pesticide poisoning subjects had higher risk for hypothyroidism than did non-anticholinesterase pesticide poisoning subjects in terms of the age subgroup of 40-64 years, female sex, past history of goiter, follow-up of <1 month, and anticholinesterase pesticide poisoning subjects without atropine treatment (incidence rate ratio [IRR]: 1.66, 95% confidence interval: 1.20-2.30). Female sex, malignancy, renal disease, thyroiditis, goiter, mental disorder, and anticholinesterase pesticide poisoning without atropine treatment were independent predictors for hypothyroidism. Anticholinesterase pesticide poisoning is associated with increased risk for hypothyroidism. Early evaluation of thyroid function in anticholinesterase pesticide poisoning subjects is suggested, especially in subjects without atropine treatment, aged 40-64 years, female sex, and past history of goiter.

Occupational poison ivy and oak dermatitis.

PubMed

Epstein, W L

1994-07-01

Among the growing and diverse groups of outdoor and environmental workers, poison ivy and poison oak continue to be the major cause of occupational contact dermatitis. This article reviews the practical and theoretic means to prevent poison ivy and poison oak dermatitis in workers occupationally exposed to these weeds.

Distractor Plausibility and Criterion Placement in Recognition

ERIC Educational Resources Information Center

Benjamin, Aaron S.; Bawa, Sameer

2004-01-01

To set an optimal decision criterion on a test of recognition, a subject must estimate the degree to which they can discriminate previously studied from unstudied stimuli. To do so accurately, the subject must assess not only their mastery of the material but also the extent to which the distractors yield mnemonic evidence that makes them…

Prescribing habitat layouts: Analysis of optimal placement for landscape planning [Chapter 23

Treesearch

Curtis H. Flather; Michael Bevers; John Hof

2002-01-01

Physical restructuring of landscapes by humans is a prominent stress on ecological systems (Rapport et al. 1985). Landscape restructuring occurs primarily through land-use conversions or alteration of native habitats through natural resource management. A common faunal response to such land-use intensification is an increased dominance of opportunistic species leading...

Automated prescription of oblique brain 3D magnetic resonance spectroscopic imaging.

PubMed

Ozhinsky, Eugene; Vigneron, Daniel B; Chang, Susan M; Nelson, Sarah J

2013-04-01

Two major difficulties encountered in implementing Magnetic Resonance Spectroscopic Imaging (MRSI) in a clinical setting are limited coverage and difficulty in prescription. The goal of this project was to automate completely the process of 3D PRESS MRSI prescription, including placement of the selection box, saturation bands and shim volume, while maximizing the coverage of the brain. The automated prescription technique included acquisition of an anatomical MRI image, optimization of the oblique selection box parameters, optimization of the placement of outer-volume suppression saturation bands, and loading of the calculated parameters into a customized 3D MRSI pulse sequence. To validate the technique and compare its performance with existing protocols, 3D MRSI data were acquired from six exams from three healthy volunteers. To assess the performance of the automated 3D MRSI prescription for patients with brain tumors, the data were collected from 16 exams from 8 subjects with gliomas. This technique demonstrated robust coverage of the tumor, high consistency of prescription and very good data quality within the T2 lesion. Copyright © 2012 Wiley Periodicals, Inc.

Short-Term Distribution System State Forecast Based on Optimal Synchrophasor Sensor Placement and Extreme Learning Machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Huaiguang; Zhang, Yingchen

This paper proposes an approach for distribution system state forecasting, which aims to provide an accurate and high speed state forecasting with an optimal synchrophasor sensor placement (OSSP) based state estimator and an extreme learning machine (ELM) based forecaster. Specifically, considering the sensor installation cost and measurement error, an OSSP algorithm is proposed to reduce the number of synchrophasor sensor and keep the whole distribution system numerically and topologically observable. Then, the weighted least square (WLS) based system state estimator is used to produce the training data for the proposed forecaster. Traditionally, the artificial neural network (ANN) and support vectormore » regression (SVR) are widely used in forecasting due to their nonlinear modeling capabilities. However, the ANN contains heavy computation load and the best parameters for SVR are difficult to obtain. In this paper, the ELM, which overcomes these drawbacks, is used to forecast the future system states with the historical system states. The proposed approach is effective and accurate based on the testing results.« less

Ensemble-based data assimilation and optimal sensor placement for scalar source reconstruction

NASA Astrophysics Data System (ADS)

Mons, Vincent; Wang, Qi; Zaki, Tamer

2017-11-01

Reconstructing the characteristics of a scalar source from limited remote measurements in a turbulent flow is a problem of great interest for environmental monitoring, and is challenging due to several aspects. Firstly, the numerical estimation of the scalar dispersion in a turbulent flow requires significant computational resources. Secondly, in actual practice, only a limited number of observations are available, which generally makes the corresponding inverse problem ill-posed. Ensemble-based variational data assimilation techniques are adopted to solve the problem of scalar source localization in a turbulent channel flow at Reτ = 180 . This approach combines the components of variational data assimilation and ensemble Kalman filtering, and inherits the robustness from the former and the ease of implementation from the latter. An ensemble-based methodology for optimal sensor placement is also proposed in order to improve the condition of the inverse problem, which enhances the performances of the data assimilation scheme. This work has been partially funded by the Office of Naval Research (Grant N00014-16-1-2542) and by the National Science Foundation (Grant 1461870).

Surveillance of a 2D Plane Area with 3D Deployed Cameras

PubMed Central

Fu, Yi-Ge; Zhou, Jie; Deng, Lei

2014-01-01

As the use of camera networks has expanded, camera placement to satisfy some quality assurance parameters (such as a good coverage ratio, an acceptable resolution constraints, an acceptable cost as low as possible, etc.) has become an important problem. The discrete camera deployment problem is NP-hard and many heuristic methods have been proposed to solve it, most of which make very simple assumptions. In this paper, we propose a probability inspired binary Particle Swarm Optimization (PI-BPSO) algorithm to solve a homogeneous camera network placement problem. We model the problem under some more realistic assumptions: (1) deploy the cameras in the 3D space while the surveillance area is restricted to a 2D ground plane; (2) deploy the minimal number of cameras to get a maximum visual coverage under more constraints, such as field of view (FOV) of the cameras and the minimum resolution constraints. We can simultaneously optimize the number and the configuration of the cameras through the introduction of a regulation item in the cost function. The simulation results showed the effectiveness of the proposed PI-BPSO algorithm. PMID:24469353

24 CFR 965.701 - Lead-based paint poisoning prevention.

Code of Federal Regulations, 2010 CFR

2010-04-01

... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Lead-Based Paint Poisoning Prevention § 965.701 Lead-based paint poisoning prevention. The requirements of the Lead-Based Paint Poisoning... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Lead-based paint poisoning...

24 CFR 965.701 - Lead-based paint poisoning prevention.

Code of Federal Regulations, 2014 CFR

2014-04-01

... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Lead-Based Paint Poisoning Prevention § 965.701 Lead-based paint poisoning prevention. The requirements of the Lead-Based Paint Poisoning... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Lead-based paint poisoning...

24 CFR 965.701 - Lead-based paint poisoning prevention.

Code of Federal Regulations, 2012 CFR

2012-04-01

... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Lead-Based Paint Poisoning Prevention § 965.701 Lead-based paint poisoning prevention. The requirements of the Lead-Based Paint Poisoning... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Lead-based paint poisoning...

24 CFR 965.701 - Lead-based paint poisoning prevention.

Code of Federal Regulations, 2011 CFR

2011-04-01

... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Lead-Based Paint Poisoning Prevention § 965.701 Lead-based paint poisoning prevention. The requirements of the Lead-Based Paint Poisoning... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Lead-based paint poisoning...

24 CFR 965.701 - Lead-based paint poisoning prevention.

Code of Federal Regulations, 2013 CFR

2013-04-01

... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Lead-Based Paint Poisoning Prevention § 965.701 Lead-based paint poisoning prevention. The requirements of the Lead-Based Paint Poisoning... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Lead-based paint poisoning...

House of Poison: Poisons in the Home.

ERIC Educational Resources Information Center

Keller, Rosanne

One of a series of instructional materials produced by the Literacy Council of Alaska, this booklet provides information about common household poisons. Using a simplified vocabulary and shorter sentences, it provides statistics concerning accidental poisonings; a list of the places poisons are usually found in the home; steps to make the home…

16 CFR § 1700.15 - Poison prevention packaging standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Poison prevention packaging standards. § 1700.15 Section § 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

Scombroid poisoning.

PubMed

McInerney, J; Sahgal, P; Vogel, M; Rahn, E; Jonas, E

1996-08-01

Scombroid poisoning is described in the literature as a toxic poisoning caused by ingestion of certain dark meat fish undergoing bacterial decomposition. Poisoning results from the ingestion of a heat-stable toxin. We describe the case of a man who presented to the emergency department several hours after eating tuna steak with evidence of scombroid poisoning that was associated with loss of vision and atrial tachycardia with block. All signs and symptoms resolved after treatment for scombroid poisoning.

Identification and treatment of poison ivy dermatitis.

PubMed

Briant, D; Brouder, G

1983-01-01

Poison ivy dermatitis is an acute self-limiting problem of two or three weeks' duration that can cause significant discomfort. Poison ivy, poison oak and poison sumac cause more cases of allergic contact dermatitis than all the other contact allergens combined. Treatment of poison ivy dermatitis depends on the severity of the reaction. The nurse practitioner can manage the majority of poison ivy cases. However, if there is systemic involvement, a physician consultation is necessary. The patient can best be assisted by assessing the severity of the dermatitis, prescribing an appropriate supportive therapy and teaching preventive measures.

Alkaloid-Containing Plants Poisonous to Cattle and Horses in Europe.

PubMed

Cortinovis, Cristina; Caloni, Francesca

2015-12-08

Alkaloids, nitrogen-containing secondary plant metabolites, are of major interest to veterinary toxicology because of their occurrence in plant species commonly involved in animal poisoning. Based on epidemiological data, the poisoning of cattle and horses by alkaloid-containing plants is a relatively common occurrence in Europe. Poisoning may occur when the plants contaminate hay or silage or when forage alternatives are unavailable. Cattle and horses are particularly at risk of poisoning by Colchicum autumnale (meadow saffron), Conium maculatum (poison hemlock), Datura stramonium (jimson weed), Equisetum palustre (marsh horsetail), Senecio spp. (ragwort and groundsel) and Taxus baccata (European yew). This review of poisonous alkaloid-containing plants describes the distribution of these plants, conditions under which poisoning occurs, active toxic principles involved and subsequent clinical signs observed.

Tropical fish poisoning in temperate climates: food poisoning from ciguatera toxin presenting in Avonmouth.

PubMed

Kipping, Ruth; Eastcott, Howard; Sarangi, Joyshri

2006-12-01

Ciguatera toxin causes a range of gastrointestinal, cardiovascular and neurological symptoms that occur within 1-6 h of ingesting fish with the toxin and can last for days, months or years. It is a well-recognized problem in the tropics. Avon Health Protection Team investigated food poisoning on a ship at Avonmouth, which was thought by the crew to be related to a white snapper fish from the Caribbean. The symptoms were initially thought to be scombroid fish poisoning but were consistent with ciguatera fish poisoning. Cases of fish poisoning from fish imported from the Caribbean and Pacific or travellers returning from tropical countries may be ciguatera fish poisoning, but mistakenly diagnosed as scombroid fish poisoning.

Factors associated with self-reported symptoms of acute pesticide poisoning among farmers in northwestern Jamaica.

PubMed

Ncube, Ngqabutho M; Fogo, Christopher; Bessler, Patricia; Jolly, Curtis M; Jolly, Pauline E

2011-01-01

Pesticide poisoning is a major public health concern in developing countries. The authors conducted a population survey among farmers in 3 parishes of northwestern Jamaica to determine the occurrence of acute pesticide poisoning and to identify factors associated with pesticide poisoning. Approximately 16% of 359 farmers who participated in the study reported 1 or more incidents of acute pesticide poisoning within the last 2 years. Only 25% of the farmers reported ever receiving training in pesticide handling or safety. The majority (68%) of farmers who reported pesticide poisoning never sought medical attention for poisoning. The factors found to be associated with pesticide poisoning in this study indicate that implementation of specific intervention strategies and education of farmers is needed in order to improve safe handling, use, and disposal of pesticides and reduce incidents of acute pesticide poisoning.

Factors associated with self-reported symptoms of acute pesticide poisoning among farmers in northwestern Jamaica

PubMed Central

Ncube, Ngqabutho M.; Fogo, Christopher; Bessler, Patricia; Jolly, Curtis M.; Jolly, Pauline E.

2011-01-01

Pesticide poisoning is a major public health concern in developing countries. We conducted a population survey among farmers in three parishes of northwestern Jamaica to determine the occurrence of acute pesticide poisoning and to identify factors associated with pesticide poisoning. Approximately 16% of 359 farmers who participated in the study reported one or more incidents of acute pesticide poisoning within the last two years. Only 25% of the farmers reported ever receiving training in pesticide handling or safety. The majority (68%) of farmers who reported pesticide poisoning never sought medical attention for poisoning. The factors found to be associated with pesticide poisoning in this study indicate that implementation of specific intervention strategies and education of farmers is needed in order to improve safe handling, use and disposal of pesticides and reduce incidents of acute pesticide poisoning. PMID:24484363

[Analysis of epidemiological characteristics of acute pesticide poisoning during 2007-2013 in Jinan, China].

PubMed

Liu, Shouqin; Zhou, Lin; Yan, Ling; Zhang, Jun; Han, Jing

2014-06-01

To investigate the epidemiological characteristics of acute pesticide poisoning in Jinan, China and to provide effective proposals for the prevention and control of pesticide poisoning. Reported cases of acute pesticide poisoning from 2007 to 2013 in Jinan were collected and subjected to statistical analysis using SPSS 17. A total of 4852 cases of acute pesticide poisoning were reported from 2007 to 2013 in Jinan. The fatality rate was 14.10%. The incidence of non-occupational poisoning accounted for 94.23% (4 572/4 852). The incidence of occupational poisoning showed a decreasing trend from 2007 to 2013, with most cases poisoned by insecticides (236 cases, accounting for 82.86% of all cases of occupational poisoning). Among non-occupational poisoning cases, fatality rate was higher in cases aged 60 years or over than in those under 60 years; fatality rate was higher among male cases (16.11%) than among female cases (13.79%); herbicides had a significantly higher lethal rate (22.25%) than insecticides (14.02%) (P < 0.05). More attention should be paid to acute pesticide poisoning in Jinan, and effective management measures should be taken immediately.

[Mortality due to pesticide poisoning in Colombia, 1998-2011].

PubMed

Chaparro-Narváez, Pablo; Castañeda-Orjuela, Carlos

2015-08-01

Poisoning due to pesticides is an important public health problem worldwide due its morbidity and mortality. In Colombia, there are no exact data on mortality due to pesticide poisoning. To estimate the trend of mortality rate due to pesticide poisoning in Colombia between 1998 and 2011. We carried out a descriptive analysis with the database reports of death as unintentional poisoning, self-inflicted intentional poisoning, aggression with pesticides, and poisoning with non-identified intentionality, population projections between 1998 and 2011, and rurality indexes. Crude and age-adjusted mortality rates were estimated and trends and Spearman coefficients were evaluated. A total of 4,835 deaths were registered (age-adjusted mortality rate of 2.38 deaths per 100,000 people). Mortality rates were higher in rural areas, for self-inflicted intentional poisoning, in men and in age groups between 15 and 39 years old. The trend has been decreasing since 2002. Municipality mortality rates due to unintentional poisoning and aggression correlated significantly with the rurality index in less rural municipalities. Mortality rates due to pesticide poisoning presented a mild decrease between 1998 and 2011. It is necessary to adjust and reinforce the measures conducive to reducing pesticide exposure in order to avoid poisoning and reduce mortality.

Paraquat poisoning calls to the Malaysia National Poison Centre following its ban and subsequent restriction of the herbicide from 2004 to 2015.

PubMed

Leong, Yin-Hui; Ariff, Adilah Mohamed; Khan, Halilol Rahman Mohamed; Rani, Noor Afiza Abdul; Majid, Mohamed Isa Abdul

2018-05-01

This study analyses the incidences and patterns of paraquat poisoning from calls received at the Malaysia National Poison Centre (NPC) since 2004 following the ban of the herbicide (2004-2006) and subsequent restriction up to year 2015. Related reported cases to the centre over twelve years (2004-2015) were retrieved and studied in respect to socio-demographic characteristics, mode and type of poisonings, exposure routes and location of incident. Ages of poisoned victims range from 10 months old to 98 years with males being intoxicated more frequently than females (ratio male to female = 2.7). The age group mainly involved in the poisoning was 20-39 years. The most common mode was intentional (62.8%) followed by unintentional (36.9%). Among the 1232 reported cases, suicidal poisoning was the highest (57.2%); accidental poisoning (30.8%) and occupational poisoning (3.3%). The findings showed an upward trend of suicidal poisoning over the years, clearly emphasizing the need for more stringent and effective enforcement to ensure the safe use of paraquat. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

MS 04-044: demographic features of drug and chemical poisoning in northern Malaysia.

PubMed

Fathelrahman, Ahmed Ibrahim; Ab Rahman, Ab Fatah; Mohd Zain, Zaininah

2005-01-01

Acute poisoning is a significant health problem all over the world. In Malaysia, nationwide data on poisoning pattern is scarce and incomplete. The objectives of our study were to determine the pattern of acute drug and chemical poisoning at Penang General Hospital (PGH), in the northern region of Malaysia, and to compare poisoning characteristics between different ethnic groups. The study was a retrospective case review of all poisoned patients admitted to PGH during the years 2000-2002. We collected data concerning demographic parameters of patients, information about the agent(s) implicated, and circumstances surrounding the event. There were 493 poisoning incidents. Nearly two-thirds of the poisoned cases involved female patients. The predominant mode of poisoning was intentional (51.5%). The age group 15.1-30 years ranked at the top, constituting 55.2% of all cases. Drugs were the predominant agents implicated. Among cases associated with drugs, paracetamol was the main causative agent (44.7%). Chinese patients constituted 37.7% of all poisoning cases, followed by the Indians (31.6%) and Malays (26.6%). Between ethnic groups, Indian patients were found to have the highest rate of poisoning admission of 75.2 per 100,000 persons.

Drug-poisoning Deaths Involving Opioid Analgesics: United States, 1999-2011.

PubMed

Chen, Li Hui; Hedegaard, Holly; Warner, Margaret

2014-09-01

Data from the National Vital Statistics System, Mortality File. The age-adjusted rate for opioid-analgesic poisoning deaths nearly quadrupled from 1.4 per 100,000 in 1999 to 5.4 per 100,000 in 2011. Although the opioid-analgesic poisoning death rates increased each year from 1999 through 2011, the rate of increase has slowed since 2006. Natural and semisynthetic opioid analgesics, such as hydrocodone, morphine, and oxycodone, were involved in 11,693 drug-poisoning deaths in 2011, up from 2,749 deaths in 1999. Benzodiazepines were involved in 31% of the opioid-analgesic poisoning deaths in 2011, up from 13% of the opioid-analgesic poisoning deaths in 1999. During the past decade, adults aged 55-64 and non-Hispanic white persons experienced the greatest increase in the rates of opioid-analgesic poisoning deaths. Poisoning is the leading cause of injury death in the United States (1). Drugs-both illicit and pharmaceutical-are the major cause of poisoning deaths, accounting for 90% of poisoning deaths in 2011. Misuse or abuse of prescription drugs, including opioid-analgesic pain relievers, is responsible for much of the recent increase in drug-poisoning deaths (2). This report highlights trends in drug-poisoning deaths involving opioid analgesics (referred to as opioid-analgesic poisoning deaths) and updates previous Data Briefs on this topic. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

Childhood pesticide poisoning in Zhejiang, China: a retrospective analysis from 2006 to 2015.

PubMed

Yimaer, Aziguli; Chen, Guangdi; Zhang, Meibian; Zhou, Lifang; Fang, Xinglin; Jiang, Wei

2017-06-28

Pesticide poisoning in children has been a serious public health issue around the world, especially in the developing countries where agriculture is still one of the largest economic sectors. The purpose of this study was to analyze epidemiological characteristics of acute pesticide poisoning in children from Zhejiang province, China. The pesticide poisoning cases for children were retrieved from Occupational Disease Surveillance and Reporting System, Zhejiang Provincial Center for Disease Control and Prevention, China. The incident cases, deaths, and fatality rate of child pesticide poisoning from 2006 through 2015 were calculated. During the study period, totally 2952 children were poisoned by pesticides, with 66 deaths, resulting in a fatality rate of 2.24%. Among them, there were 1607 male cases with 28 deaths, and 1345 female cases with 38 deaths. Most of the cases occurred in preschool children (1349) and adolescent age group (1269). Organophosphate and carbamate insecticides were the cause of most poisonings (1130), leading to 34 deaths. The highest fatality rate (3.13%) was due to poisoning by herbicides and fungicides, causing 14 deaths out of 448 cases. Poisoning occurred mostly in rural areas (78%). And most pesticide poisoning occurred in the summer (896) and fall (811), while fewest poisoning cases in the winter (483) but with the highest fatality rate (3.52%). This study shows that pesticide poisoning of children is a major health problem in Zhejiang, suggesting preventive strategies should be conducted to control childhood pesticide poisoning.

Intentional and unintentional poisoning in Pakistan: a pilot study using the Emergency Departments surveillance project.

PubMed

Khan, Nadeem; Pérez-Núñez, Ricardo; Shamim, Nudrat; Khan, Uzma; Naseer, Naureen; Feroze, Asher; Razzak, Junaid; Hyder, Adnan A

2015-01-01

Acute poisoning is one of the most common reasons for emergency department visits around the world. In Pakistan, the epidemiological data on poisoning is limited due to an under developed poison information surveillance system. We aim to describe the characteristics associated with intentional and unintentional poisoning in Pakistan presenting to emergency departments. The data was extracted from the Pakistan National Emergency Department Surveillance (Pak-NEDS) which was an active surveillance conducted between November 2010 and March 2011. All patients, regardless of age, who presented with poisoning to any of Pakistan's seven major tertiary care centers' emergency departments, were included. Information about patient demographics, type of poisoning agent, reason for poisoning and outcomes were collected using a standard questionnaire. Acute poisoning contributed to 1.2% (n = 233) of patients with intentional and unintentional injuries presenting to EDs of participating centers. Of these, 68% were male, 54% were aged 19 to 44 and 19% were children and adolescents (<18 years). Types of poisoning included chemical/gas (43.8%), drug/medicine (27%), alcohol (16.7%) and food/plant (6%). In half of all patients the poisoning was intentional. A total of 11.6% of the patients were admitted and 6.6% died. Poisoning causes more morbidity and mortality in young adults in Pakistan compared to other age groups, half of which is intentional. Improving mental health, regulatory control for hazardous chemicals and better access to care through poison information centers and emergency departments will potentially help control the problem.

Differential role of molten globule and protein folding in distinguishing unique features of botulinum neurotoxin.

PubMed

Kumar, Raj; Kukreja, Roshan V; Cai, Shuowei; Singh, Bal R

2014-06-01

Botulinum neurotoxins (BoNTs) are proteins of great interest not only because of their extreme toxicity but also paradoxically for their therapeutic applications. All the known serotypes (A-G) have varying degrees of longevity and potency inside the neuronal cell. Differential chemical modifications such as phosphorylation and ubiquitination have been suggested as possible mechanisms for their longevity, but the molecular basis of the longevity remains unclear. Since the endopeptidase domain (light chain; LC) of toxin apparently survives inside the neuronal cells for months, it is important to examine the structural features of this domain to understand its resistance to intracellular degradation. Published crystal structures (both botulinum neurotoxins and endopeptidase domain) have not provided adequate explanation for the intracellular longevity of the domain. Structural features obtained from spectroscopic analysis of LCA and LCB were similar, and a PRIME (PReImminent Molten Globule Enzyme) conformation appears to be responsible for their optimal enzymatic activity at 37°C. LCE, on the other hand, was although optimally active at 37°C, but its active conformation differed from the PRIME conformation of LCA and LCB. This study establishes and confirms our earlier finding that an optimally active conformation of these proteins in the form of PRIME exists for the most poisonous poison, botulinum neurotoxin. There are substantial variations in the structural and functional characteristics of these active molten globule related structures among the three BoNT endopeptidases examined. These differential conformations of LCs are important in understanding the fundamental structural features of proteins, and their possible connection to intracellular longevity could provide significant clues for devising new countermeasures and effective therapeutics. Copyright © 2014 Elsevier B.V. All rights reserved.

Optimization of hydrophilic interaction liquid chromatography/mass spectrometry and development of solid-phase extraction for the determination of paralytic shellfish poisoning toxins.

PubMed

Turrell, Elizabeth; Stobo, Lesley; Lacaze, Jean-Pierre; Piletsky, Sergey; Piletska, Elena

2008-01-01

The combination of hydrophilic interaction liquid chromatography (HILIC) and liquid chromatography/mass spectrometry (LC/MS) for the determination of paralytic shellfish poisoning (PSP) toxins has been proposed for use in routine monitoring of shellfish. In this study, methods for the detection of multiple PSP toxins [saxitoxin (STX), neosaxitoxin (NEO), decarbamoyl saxitoxin (dcSTX), decarbamoyl neosaxitoxin (dcNEO), gonyautoxins 1-5 (GTX1, GTX2, GTX3, GTX4, GTX5), decarbamoyl gonyautoxins (dcGTX2 and dcGTX3), and the N-sulfocarbamoyl C toxins (C1 and C2)] were optimized using single (MS) and triple quadrupole (MS/MS) instruments. Chromatographic separation of the toxins was achieved by using a TSK-gel Amide-80 analytical column, although superior chromatography was observed through application of a ZIC-HILIC column. Preparative procedures used to clean up shellfish extracts and concentrate PSP toxins prior to analysis were investigated. The capacity of computationally designed polymeric (CDP) materials and HILIC solid-phase extraction (SPE) cartridges to retain highly polar PSP toxins was explored. Three CDP materials and 2 HILIC cartridges were assessed for the extraction of PSP toxins from aqueous solution. Screening of the CDPs showed that all tested polymers adsorbed PSP toxins. A variety of elution procedures were examined, with dilute 0.01% acetic acid providing optimum recovery from a CDP based on 2-(trifluoromethyl)acrylic acid as the monomer. ZIC-HILIC SPE cartridges were superior to the PolyLC equivalent, with recoveries ranging from 70 to 112% (ZIC-HILIC) and 0 to 90% (PolyLC) depending on the PSP toxin. It is proposed that optimized SPE and HILIC-MS methods can be applied for the quantitative determination of PSP toxins in shellfish.

Optimal marker placement in hadrontherapy: intelligent optimization strategies with augmented Lagrangian pattern search.

PubMed

Altomare, Cristina; Guglielmann, Raffaella; Riboldi, Marco; Bellazzi, Riccardo; Baroni, Guido

2015-02-01

In high precision photon radiotherapy and in hadrontherapy, it is crucial to minimize the occurrence of geometrical deviations with respect to the treatment plan in each treatment session. To this end, point-based infrared (IR) optical tracking for patient set-up quality assessment is performed. Such tracking depends on external fiducial points placement. The main purpose of our work is to propose a new algorithm based on simulated annealing and augmented Lagrangian pattern search (SAPS), which is able to take into account prior knowledge, such as spatial constraints, during the optimization process. The SAPS algorithm was tested on data related to head and neck and pelvic cancer patients, and that were fitted with external surface markers for IR optical tracking applied for patient set-up preliminary correction. The integrated algorithm was tested considering optimality measures obtained with Computed Tomography (CT) images (i.e. the ratio between the so-called target registration error and fiducial registration error, TRE/FRE) and assessing the marker spatial distribution. Comparison has been performed with randomly selected marker configuration and with the GETS algorithm (Genetic Evolutionary Taboo Search), also taking into account the presence of organs at risk. The results obtained with SAPS highlight improvements with respect to the other approaches: (i) TRE/FRE ratio decreases; (ii) marker distribution satisfies both marker visibility and spatial constraints. We have also investigated how the TRE/FRE ratio is influenced by the number of markers, obtaining significant TRE/FRE reduction with respect to the random configurations, when a high number of markers is used. The SAPS algorithm is a valuable strategy for fiducial configuration optimization in IR optical tracking applied for patient set-up error detection and correction in radiation therapy, showing that taking into account prior knowledge is valuable in this optimization process. Further work will be focused on the computational optimization of the SAPS algorithm toward fast point-of-care applications. Copyright © 2014 Elsevier Inc. All rights reserved.

[Analysis of acute pesticide poisoning in Ningbo city from 2011 to 2016].

PubMed

Li, X H; Leng, P B; Mao, G C; Wang, A H

2018-01-20

Objective: To analyze the characteristics of acute pesticide poisoning in Ningbo, and to provide scientific basis for the prevention and control strategy. Methods: In February 2017, the pesticide poisoning report card of Ningbo from 2011 to 2016 was drawn from the China Disease Control and prevention information system. The data of the report card was organized by Excel and analyzed by SPSS19.0 software. Results: 2593 cases of acute pesticide poisoning were reported in Ningbo from 2011 to 2016, 125 deaths, and the case fatality rate was 4.82%. The productive pesticide poisoning and unproductive pesticide poisoning were 299 and 2294, respectively, the ratio was 1: 7.67. The case fatality rate were 0.33% and 5.41%, respectively. The difference was statistically significant (χ(2)=14.83, P<0.01). The productive Pesticide poisoning mainly occurred from July to September (55.85%) , the unproductive pesticides mainly occurred from April to June (30.64%) and July to September (30.34%). The seasonal distribution of the pesticide poisoning in the two groups was statistically significant (χ2=82.21, P<0.01). The productive pesticide poisoning in male (80.27%) was significantly higher than the proportion of unproductive pesticide poisoning (52.09%) , the differences in gender composition between the two types of pesticide poisoning was significant (χ2=84.97, P<0.01). The productive pesticide poisoning from 55 to 65 years old group was in the largest number (35.45%) , and the distribution of unproductive pesticide poisoning was uniform in each age group including 25 years old and above, the difference in age composition between two types of pesticide poisoning was statistically significant (χ2=177.84, P<0.01). All of the 10 counties of Ningbo had reports of pesticide poisoning. The counties with more reports were Ninghai county (18.28%) , Fenghua district (14.69%) and Yuyao (12.42%). The acute pesticide poisoning was mainly caused by pesticides and herbicides, mainly in organophosphorus (45.74%) and paraquat (16.81%) . Conclusions: At present, the pesticide poisoning in Ningbo is given priority to unproductive pesticide poisoning currently, seasonal distribution characteristics was obvious, and occurred both in different sex and age groups, suggesting that the relevant departments should carry out targeted health education, and strengthen the management of high toxic and highly toxic pesticides.

Design of a correlated validated CFD and genetic algorithm model for optimized sensors placement for indoor air quality monitoring

NASA Astrophysics Data System (ADS)

Mousavi, Monireh Sadat; Ashrafi, Khosro; Motlagh, Majid Shafie Pour; Niksokhan, Mohhamad Hosein; Vosoughifar, HamidReza

2018-02-01

In this study, coupled method for simulation of flow pattern based on computational methods for fluid dynamics with optimization technique using genetic algorithms is presented to determine the optimal location and number of sensors in an enclosed residential complex parking in Tehran. The main objective of this research is costs reduction and maximum coverage with regard to distribution of existing concentrations in different scenarios. In this study, considering all the different scenarios for simulation of pollution distribution using CFD simulations has been challenging due to extent of parking and number of cars available. To solve this problem, some scenarios have been selected based on random method. Then, maximum concentrations of scenarios are chosen for performing optimization. CFD simulation outputs are inserted as input in the optimization model using genetic algorithm. The obtained results stated optimal number and location of sensors.

Get the Lead Out: Facts about Childhood Lead Poisoning [and] Housekeeping Tips To Reduce Lead Exposure [and] Nutrition and Lead Poisoning [and] The Medical Consequences of Lead Poisoning [and] Lead Poisoning for Health Care Providers.

ERIC Educational Resources Information Center

Illinois State Dept. of Public Health, Springfield.

This document is comprised of five fact sheets from the Illinois Department of Public Health regarding childhood lead poisoning. Recent studies claim that childhood lead poisoning can contribute to problems later in life, such as academic failure, juvenile delinquency, and high blood pressure. Directed to parents, caregivers, and health care…

Emergency department visits due to pesticide poisoning in South Korea, 2006-2009.

PubMed

Ko, Yousun; Kim, Hyun Joong; Cha, Eun Shil; Kim, Jaeyoung; Lee, Won Jin

2012-02-01

The objective of this study is to estimate the numbers and rate of emergency department visits in South Korea that are the result of pesticide poisoning and to describe their epidemiologic characteristics. Data collected from the National Emergency Department Information System were used to estimate the number of emergency department visits due to pesticide poisoning in South Korea for the period spanning 2006 through 2009. Emergency department visits for pesticide poisoning were defined by ICD-10 codes (T60.0-T60.9). National estimates and their 95% confidence intervals were calculated per 100 000 population. Among the 65 877 total poisoning-related emergency department visits in the data, 11 985 (18.2%) were emergency department visits resulting from pesticide poisoning. During the study period, the annual average rate of emergency department visits for pesticide poisoning was 26.8 per 100 000 population. Intentional pesticide poisoning (51.4%) was more frequent than unintentional. The fatality rate from intentional pesticide poisoning was also higher than that from unintentional or cases where the intention was unknown. In terms of age-specific rates of emergency department visits for pesticide poisoning, they increased with age, as did the gap between men and women. This study provide estimates for emergency department visits due to pesticide poisoning at the national level and suggests that pesticide poisonings, both intentional and unintentional, require significant public health interventions in South Korea.

Pesticide poisoning in Zhejiang, China: a retrospective analysis of adult cases registration by occupational disease surveillance and reporting systems from 2006 to 2010.

PubMed

Zhang, Meibian; Fang, Xinglin; Zhou, Lifang; Su, Liling; Zheng, Jiajia; Jin, Minjuan; Zou, Hua; Chen, Guangdi

2013-11-21

Despite the rapid industrialisation and urbanisation over the past 30 years, agriculture is one of the largest economic sectors in China and the unregulated use of pesticides result in extensive pesticide poisoning. The objective of this study was to analyse pesticide poisoning cases registration received by Zhejiang Provincial Center for Disease Control and Prevention, China. Register-based study. Cases registered regarding pesticide poisoning. Data were obtained from the Occupational Disease Surveillance and Reporting Systems in Zhejiang province from 2006 to 2010, which contains anonymous records representing general population of Zhejiang province, China. All cases registered as pesticide poisoning were identified. Monthly and age-group pesticide poisoning death rates were calculated. A total of 20 097 pesticide poisoning cases with 1413 deaths were recorded during the study period. There were 10 513 male pesticide poisoning cases with 782 deaths, and 9584 females with 631 deaths. Pesticide poisoning occurred mostly in non-occupational exposure (79.86%), in which the majority (85.77%) of the cases was of intentional pesticide poisoning. The occupational exposure was most common in men during the farming season. The death rate increased stepwise with age, and the pesticide suicide rate was higher in the older age group. Pesticide poisoning remains a major health problem in China, and further recommendations to reduce the pesticide poisoning are required.

Scombroid poisoning: a review.

PubMed

Hungerford, James M

2010-08-15

Scombroid poisoning, also called histamine fish poisoning, is an allergy-like form of food poisoning that continues to be a major problem in seafood safety. The exact role of histamine in scombroid poisoning is not straightforward. Deviations from the expected dose-response have led to the advancement of various possible mechanisms of toxicity, none of them proven. Histamine action levels are used in regulation until more is known about the mechanism of scombroid poisoning. Scombroid poisoning and histamine are correlated but complicated. Victims of scombroid poisoning respond well to antihistamines, and chemical analyses of fish implicated in scombroid poisoning generally reveal elevated levels of histamine. Scombroid poisoning is unique among the seafood toxins since it results from product mishandling rather than contamination from other trophic levels. Inadequate cooling following harvest promotes bacterial histamine production, and can result in outbreaks of scombroid poisoning. Fish with high levels of free histidine, the enzyme substrate converted to histamine by bacterial histidine decarboxylase, are those most often implicated in scombroid poisoning. Laboratory methods and screening methods for detecting histamine are available in abundance, but need to be compared and validated to harmonize testing. Successful field testing, including dockside or on-board testing needed to augment HACCP efforts will have to integrate rapid and simplified detection methods with simplified and rapid sampling and extraction. Otherwise, time-consuming sample preparation reduces the impact of gains in detection speed on the overall analysis time. Published by Elsevier Ltd.

[A relational database to store Poison Centers calls].

PubMed

Barelli, Alessandro; Biondi, Immacolata; Tafani, Chiara; Pellegrini, Aristide; Soave, Maurizio; Gaspari, Rita; Annetta, Maria Giuseppina

2006-01-01

Italian Poison Centers answer to approximately 100,000 calls per year. Potentially, this activity is a huge source of data for toxicovigilance and for syndromic surveillance. During the last decade, surveillance systems for early detection of outbreaks have drawn the attention of public health institutions due to the threat of terrorism and high-profile disease outbreaks. Poisoning surveillance needs the ongoing, systematic collection, analysis, interpretation, and dissemination of harmonised data about poisonings from all Poison Centers for use in public health action to reduce morbidity and mortality and to improve health. The entity-relationship model for a Poison Center relational database is extremely complex and not studied in detail. For this reason, not harmonised data collection happens among Italian Poison Centers. Entities are recognizable concepts, either concrete or abstract, such as patients and poisons, or events which have relevance to the database, such as calls. Connectivity and cardinality of relationships are complex as well. A one-to-many relationship exist between calls and patients: for one instance of entity calls, there are zero, one, or many instances of entity patients. At the same time, a one-to-many relationship exist between patients and poisons: for one instance of entity patients, there are zero, one, or many instances of entity poisons. This paper shows a relational model for a poison center database which allows the harmonised data collection of poison centers calls.

Differences in perception of risk between people who have and have not experienced Salmonella food poisoning.

PubMed

Parry, Sharon M; Miles, Susan; Tridente, Ascanio; Palmer, Stephen R

2004-02-01

It is believed that food hygiene precautions in domestic kitchens are an important strategy in efforts to reduce the incidence of sporadic food poisoning, but recent research has shown that people who have suffered food poisoning handle the same types of foods and adopt similar food hygiene precautions in their kitchens to the rest of the population. This suggests the need to examine other factors. A case-control study of sporadic Salmonella food poisoning was conducted to investigate several domestic kitchen risk factors. Measures of perception of risk, knowledge, and control associated with food poisoning in case and control respondents are reported here. It was found that perceived personal risk from food poisoning in the home was less than perceived risk to other people. In contrast, ratings of personal knowledge about food poisoning and personal control over food poisoning in the home were seen to be greater than other people's knowledge and control. There were no differences between the cases and the controls in their ratings of knowledge about food poisoning or their control over food poisoning. However, cases perceived their personal risk from food poisoning to be higher than controls. Both case and control samples exhibited optimistic bias but this was reduced in the case sample, suggesting that experience with food poisoning may reduce optimistic bias.

Tetrahydrozoline poisoning

MedlinePlus

... help if this information is not immediately available. Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Kerosene poisoning

MedlinePlus

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Dieffenbachia poisoning

MedlinePlus

... were eaten, if known Time swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Detergent poisoning

MedlinePlus

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Pokeweed poisoning

MedlinePlus

... poisoning URL of this page: //medlineplus.gov/ency/article/002874.htm Pokeweed poisoning To use the sharing features on this page, please enable JavaScript. Pokeweed is a flowering plant. Pokeweed poisoning occurs ...

Philodendron poisoning

MedlinePlus

... poisoning URL of this page: //medlineplus.gov/ency/article/002872.htm Philodendron poisoning To use the sharing features on this page, please enable JavaScript. Philodendron is a flowering houseplant. Philodendron poisoning occurs ...

49 CFR 172.554 - POISON placard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false POISON placard. 172.554 Section 172.554... SECURITY PLANS Placarding § 172.554 POISON placard. (a) Except for size and color, the POISON placard must be as follows: EC02MR91.057 (b) In addition to complying with § 172.519, the background on the POISON...

49 CFR 172.540 - POISON GAS placard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false POISON GAS placard. 172.540 Section 172.540... SECURITY PLANS Placarding § 172.540 POISON GAS placard. (a) Except for size and color, the POISON GAS... the POISON GAS placard and the symbol must be white. The background of the upper diamond must be black...

49 CFR 172.554 - POISON placard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false POISON placard. 172.554 Section 172.554... SECURITY PLANS Placarding § 172.554 POISON placard. (a) Except for size and color, the POISON placard must be as follows: EC02MR91.057 (b) In addition to complying with § 172.519, the background on the POISON...

49 CFR 172.554 - POISON placard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false POISON placard. 172.554 Section 172.554... SECURITY PLANS Placarding § 172.554 POISON placard. (a) Except for size and color, the POISON placard must be as follows: EC02MR91.057 (b) In addition to complying with § 172.519, the background on the POISON...

49 CFR 172.554 - POISON placard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false POISON placard. 172.554 Section 172.554... SECURITY PLANS Placarding § 172.554 POISON placard. (a) Except for size and color, the POISON placard must be as follows: EC02MR91.057 (b) In addition to complying with § 172.519, the background on the POISON...

49 CFR 172.540 - POISON GAS placard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false POISON GAS placard. 172.540 Section 172.540... SECURITY PLANS Placarding § 172.540 POISON GAS placard. (a) Except for size and color, the POISON GAS... the POISON GAS placard and the symbol must be white. The background of the upper diamond must be black...

49 CFR 172.540 - POISON GAS placard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false POISON GAS placard. 172.540 Section 172.540... SECURITY PLANS Placarding § 172.540 POISON GAS placard. (a) Except for size and color, the POISON GAS... the POISON GAS placard and the symbol must be white. The background of the upper diamond must be black...

49 CFR 172.554 - POISON placard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false POISON placard. 172.554 Section 172.554... SECURITY PLANS Placarding § 172.554 POISON placard. (a) Except for size and color, the POISON placard must be as follows: EC02MR91.057 (b) In addition to complying with § 172.519, the background on the POISON...

49 CFR 172.540 - POISON GAS placard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false POISON GAS placard. 172.540 Section 172.540... SECURITY PLANS Placarding § 172.540 POISON GAS placard. (a) Except for size and color, the POISON GAS... the POISON GAS placard and the symbol must be white. The background of the upper diamond must be black...

49 CFR 172.540 - POISON GAS placard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false POISON GAS placard. 172.540 Section 172.540... SECURITY PLANS Placarding § 172.540 POISON GAS placard. (a) Except for size and color, the POISON GAS... the POISON GAS placard and the symbol must be white. The background of the upper diamond must be black...

Childhood lead poisoning prevention activities within Michigan local public health departments.

PubMed

Kemper, Alex R; Uren, Rebecca L; Hudson, Sharon R

2007-01-01

Local public health departments have a wide array of responsibilities, including coordinating childhood lead poisoning prevention activities. This study was conducted in an effort to understand how local public health officers prioritized lead poisoning prevention activities and the barriers to the delivery of childhood lead poisoning prevention services delivered through local health departments. A telephone survey was conducted of health officers in Michigan, a state with a high burden of environmental lead. Analysis included Spearman rank correlation and Fisher's exact test. No association was found between the local risk of lead poisoning and the priority placed by local health departments on lead poisoning prevention activities. Similarly, there was no association between the local risk of lead poisoning and the availability of services. Only 60% of local health departments offered blood lead testing, environmental investigation, and case management. Most (74%) believed that lead poisoning is inadequately addressed within the area served by their local health department. New strategies of providing lead poisoning prevention activities are needed to achieve the federal and state goals of eliminating childhood lead poisoning over the next decade.

Shaving cream poisoning

MedlinePlus

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Oven cleaner poisoning

MedlinePlus

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Lighter fluid poisoning

MedlinePlus

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Getting to the top of Google: search engine optimization.

PubMed

Maley, Catherine; Baum, Neil

2010-01-01

Search engine optimization is the process of making your Web site appear at or near the top of popular search engines such as Google, Yahoo, and MSN. This is not done by luck or knowing someone working for the search engines but by understanding the process of how search engines select Web sites for placement on top or on the first page. This article will review the process and provide methods and techniques to use to have your site rated at the top or very near the top.

Fat grafting and breast reconstruction: tips for ensuring predictability.

PubMed

Gabriel, Allen; Champaneria, Manish C; Maxwell, G Patrick

2015-06-01

Autologous fat grafting is widely used in breast surgery to refine and optimize aesthetic outcomes. Despite its widespread use, obtaining predictable, reliable, and consistent outcomes remains a significant challenge and is influenced by the technique used for procurement, processing, and placement of the fat. At present, there is no published consensus on the optimal technique. The purpose of this article is to review current techniques at each stage of fat grafting and provide tips on best practices based on the published literature as well as our extensive clinical experience.

DG Planning with Amalgamation of Operational and Reliability Considerations

NASA Astrophysics Data System (ADS)

Battu, Neelakanteshwar Rao; Abhyankar, A. R.; Senroy, Nilanjan

2016-04-01

Distributed Generation has been playing a vital role in dealing issues related to distribution systems. This paper presents an approach which provides policy maker with a set of solutions for DG placement to optimize reliability and real power loss of the system. Optimal location of a Distributed Generator is evaluated based on performance indices derived for reliability index and real power loss. The proposed approach is applied on a 15-bus radial distribution system and a 18-bus radial distribution system with conventional and wind distributed generators individually.

Alkaloid-Containing Plants Poisonous to Cattle and Horses in Europe

PubMed Central

Cortinovis, Cristina; Caloni, Francesca

2015-01-01

Alkaloids, nitrogen-containing secondary plant metabolites, are of major interest to veterinary toxicology because of their occurrence in plant species commonly involved in animal poisoning. Based on epidemiological data, the poisoning of cattle and horses by alkaloid-containing plants is a relatively common occurrence in Europe. Poisoning may occur when the plants contaminate hay or silage or when forage alternatives are unavailable. Cattle and horses are particularly at risk of poisoning by Colchicum autumnale (meadow saffron), Conium maculatum (poison hemlock), Datura stramonium (jimson weed), Equisetum palustre (marsh horsetail), Senecio spp. (ragwort and groundsel) and Taxus baccata (European yew). This review of poisonous alkaloid-containing plants describes the distribution of these plants, conditions under which poisoning occurs, active toxic principles involved and subsequent clinical signs observed. PMID:26670251

A Case of Mushroom Poisoning with Russula subnigricans: Development of Rhabdomyolysis, Acute Kidney Injury, Cardiogenic Shock, and Death.

PubMed

Cho, Jong Tae; Han, Jin Hyung

2016-07-01

Mushroom exposures are increasing worldwide. The incidence and fatality of mushroom poisoning are reported to be increasing. Several new syndromes in mushroom poisoning have been described. Rhabdomyolytic mushroom poisoning is one of new syndromes. Russula subnigricans mushroom can cause delayed-onset rhabdomyolysis with acute kidney injury in the severely poisoned patient. There are few reports on the toxicity of R. subnigricans. This report represents the first record of R. subnigricans poisoning with rhabdomyolysis in Korea, describing a 51-year-old man who suffered from rhabdomyolysis, acute kidney injury, severe hypocalcemia, respiratory failure, ventricular tachycardia, cardiogenic shock, and death. Mushroom poisoning should be considered in the evaluation of rhabdomyolysis of unknown cause. Furthermore, R. subnigricans should be considered in the mushroom poisoning with rhabdomyolysis.

Organophosphate acetylcholine esterase inhibitor poisoning from a home-made shampoo.

PubMed

Sadaka, Yair; Broides, Arnon; Tzion, Raffi Lev; Lifshitz, Matitiahu

2011-07-01

Organophosphate acetylcholine esterase inhibitor poisoning is a major health problem in children. We report an unusual cause of organophosphate acetylcholine esterase inhibitor poisoning. Two children were admitted to the pediatric intensive care unit due to organophosphate acetylcholine esterase inhibitor poisoning after exposure from a home-made shampoo that was used for the treatment of head lice. Owing to no obvious source of poisoning, the diagnosis of organophosphate acetylcholine esterase inhibitor poisoning in one of these patients was delayed. Both patients had an uneventful recovery. Organophosphate acetylcholine esterase inhibitor poisoning from home-made shampoo is possible. In cases where the mode of poisoning is unclear, direct questioning about the use of home-made shampoo is warranted, in these cases the skin and particularly the scalp should be rinsed thoroughly as soon as possible.

Optimal Capacitor Bank Capacity and Placement in Distribution Systems with High Distributed Solar Power Penetration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hodge, Brian S; Mather, Barry A; Cho, Gyu-Jung

Capacitor banks have been generally installed and utilized to support distribution voltage during period of higher load or on longer, higher impedance, feeders. Installations of distributed energy resources in distribution systems are rapidly increasing, and many of these generation resources have variable and uncertain power output. These generators can significantly change the voltage profile across a feeder, and therefore when a new capacitor bank is needed analysis of optimal capacity and location of the capacitor bank is required. In this paper, we model a particular distribution system including essential equipment. An optimization method is adopted to determine the best capacitymore » and location sets of the newly installed capacitor banks, in the presence of distributed solar power generation. Finally we analyze the optimal capacitor banks configuration through the optimization and simulation results.« less

[Analysis of reports of cases of pesticide poisoning in Jiangsu Province, China, from 2006 to 2013].

PubMed

Yu, Bin; Ding, Bangmei; Shen, Han; Zhu, Baoli; Gao, Qianqian

2015-03-01

To investigate the characteristics of pesticide poisoning in Jiangsu Province, China, and to provide a scientific basis for developing effective intervention measures and prevention strategies. The data from report cards of pesticide poisoning in Jiangsu Province from 2006 to 2013 were arranged using EXCEL tables, and assessed. Statistical analysis was applied to the epidemiological data using SPSS. From 2006 to 2013, a total of 32672 cases of pesticide poisoning were reported in Jiangsu Province. Most of the cases were caused by non-occupational poisoning (life poisoning) (72.78%). A majority of patients with pesticide poisoning were 35-54 years old (40.85%) or older than 65 years (15.69%). There were more female patients (58.22%) than male patients (41.78%). Among patients with occupational poisoning, male patients (50.90%) were more than female patients. Among patients with non-occupational poisoning, female patients were more than male patients (38.37%). Pesticide poisoning mainly occurred from July to September. The case-fatality rate of occupational poisoning (0.47%) was lower than that of non-occupational poisoning (7.10%). All 13 cities in Jiangsu Province reported cases of pesticide poisoning. There were more cases in the northern regions than in the southern regions. Pesticide poisoning was mainly caused by organophosphorus insecticides including methamidophos, dichlorvos, dimethoate, omethoate, and parathion, which accounted for 65.58%of all cases. Paraquat had the highest case-fatality rate (10.06%) among all pesticides, followed by tetramine (10.00%), dimethoate or omethoate (7.85%), methamidophos (7.79%), and dimehypo (7.68%). Pesticide poisoning cannot be ignored. The management and control should be improved in production and usage of highly toxic pesticides including organophosphorus insecticides, rodenticides, and herbicides. More attention should be paid to the protection of vulnerable groups including women, children, and the elderly.

Ciguatera and scombroid fish poisoning in the United States.

PubMed

Pennotti, Radha; Scallan, Elaine; Backer, Lorraine; Thomas, Jerry; Angulo, Frederick J

2013-12-01

Ciguatera and scombroid fish poisonings are common causes of fish-related foodborne illness in the United States; however, existing surveillance systems underestimate the overall human health impact. This study aimed to describe existing data on ciguatera and scombroid fish poisonings from outbreak and poison control center reports and to estimate the overall number of ciguatera and scombroid fish-poisoning illnesses, hospitalizations, and deaths in the United States. We analyzed outbreak data from the Foodborne Disease Outbreak Surveillance Systems (FDOSS) from 2000 to 2007 and poison control center call data from the National Poison Data System (NPDS) from 2005 to 2009 for reports of ciguatera and scombroid fish poisonings. Using a statistical model with many inputs, we adjusted the outbreak data for undercounting due to underreporting and underdiagnosis to generate estimates. Underreporting and underdiagnosis multipliers were derived from the poison control call data and the published literature. Annually, an average of 15 ciguatera and 28 scombroid fish-poisoning outbreaks, involving a total of 60 and 108 ill persons, respectively, were reported to FDOSS (2000-2007). NPDS reported an average of 173 exposure calls for ciguatoxin and 200 exposure calls for scombroid fish poisoning annually (2005-2009). After adjusting for undercounting, we estimated 15,910 (90% credible interval [CrI] 4140-37,408) ciguatera fish-poisoning illnesses annually, resulting in 343 (90% CrI 69-851) hospitalizations and three deaths (90% CrI 1-7). We estimated 35,142 (90% CrI: 10,496-78,128) scombroid fish-poisoning illnesses, resulting in 162 (90% CrI 0-558) hospitalizations and 0 deaths. Ciguatera and scombroid fish poisonings affect more Americans than reported in surveillance systems. Although additional data can improve these assessments, the estimated number of illnesses caused by seafood intoxication illuminates this public health problem. Efforts, including education, can reduce ciguatera and scombroid fish poisonings.

Intraosseous vascular access in disasters and mass casualty events: A review of the literature.

PubMed

Burgert, James M

2016-01-01

The intraosseous (IO) route of vascular access has been increasingly used to administer resuscitative fluids and drugs to patients in whom reliable intravenous (IV) access could not be rapidly or easily obtained. It is unknown that to what extent the IO route has been used to gain vascular access during disasters and mass casualty events. The purpose of this review was to examine the existing literature to answer the research question, "What is the utility of the IO route compared to other routes for establishing vascular access in patients resulting from disasters and mass casualty events?" Keyword-based online database search of PubMed, CINAHL, and the Cochrane Database of Systematic Reviews. University-based academic research cell. Included evidence were randomized and nonrandomized trials, systematic reviews with and without meta-analysis, case series, and case reports. Excluded evidence included narrative reviews and expert opinion. Not applicable. Of 297 evidence sources located, 22 met inclusion criteria. Located evidence was organized into four categories including chemical agent poisoning, IO placement, while wearing chemical protective clothing (PPE), military trauma, and infectious disease outbreak. Evidence indicates that the IO route of infusion is pharmacokinetically equal to the IV route and superior to the intramuscular (IM) and endotracheal routes for the administration of antidotal drugs in animal models of chemical agent poisoning while wearing full chemical PPE. The IO route is superior to the IM route for antidote administration during hypovolemic shock. Civilian casualties of explosive attacks and mass shootings would likely benefit from expanded use of the IO route and military resuscitation strategies. The IO route is useful for fluid resuscitation in the management of diarrheal and hemorrhagic infectious disease outbreaks.

An Unusual Cause of Carbon Monoxide Poisoning: Narghile Smoking

PubMed Central

Ateş, Alpay; Arikan, Müge; Özgök, Ayşegül

2016-01-01

Patient: Male, 27 Final Diagnosis: Carbon monoxide poisoning Symptoms: Dizziness • nausea • Syncope Medication: — Clinical Procedure: O2 treatment Specialty: Anesthesiology Objective: Challenging differential diagnosis Background: Carbon monoxide (CO) poisoning is commonly seen during the winter season in Turkey due to use of charcoal stoves and water heaters, but narghile smoking is a rare cause of CO poisoning. Case Report: In this paper, we report a CO poisoning case caused by narghile smoking. The patient was admitted to the ED with nausea, dizziness, vertigo, and syncope. Conclusions: The diagnosis of CO poisoning depends on suspicious anamnesis. The major treatment of CO poisoning is oxygen supply. PMID:27618983

Scheduling policies of intelligent sensors and sensor/actuators in flexible structures

NASA Astrophysics Data System (ADS)

Demetriou, Michael A.; Potami, Raffaele

2006-03-01

In this note, we revisit the problem of actuator/sensor placement in large civil infrastructures and flexible space structures within the context of spatial robustness. The positioning of these devices becomes more important in systems employing wireless sensor and actuator networks (WSAN) for improved control performance and for rapid failure detection. The ability of the sensing and actuating devices to possess the property of spatial robustness results in reduced control energy and therefore the spatial distribution of disturbances is integrated into the location optimization measures. In our studies, the structure under consideration is a flexible plate clamped at all sides. First, we consider the case of sensor placement and the optimization scheme attempts to produce those locations that minimize the effects of the spatial distribution of disturbances on the state estimation error; thus the sensor locations produce state estimators with minimized disturbance-to-error transfer function norms. A two-stage optimization procedure is employed whereby one first considers the open loop system and the spatial distribution of disturbances is found that produces the maximal effects on the entire open loop state. Once this "worst" spatial distribution of disturbances is found, the optimization scheme subsequently finds the locations that produce state estimators with minimum transfer function norms. In the second part, we consider the collocated actuator/sensor pairs and the optimization scheme produces those locations that result in compensators with the smallest norms of the disturbance-to-state transfer functions. Going a step further, an intelligent control scheme is presented which, at each time interval, activates a subset of the actuator/sensor pairs in order provide robustness against spatiotemporally moving disturbances and minimize power consumption by keeping some sensor/actuators in sleep mode.

On the use of PGD for optimal control applied to automated fibre placement

NASA Astrophysics Data System (ADS)

Bur, N.; Joyot, P.

2017-10-01

Automated Fibre Placement (AFP) is an incipient manufacturing process for composite structures. Despite its concep-tual simplicity it involves many complexities related to the necessity of melting the thermoplastic at the interface tape-substrate, ensuring the consolidation that needs the diffusion of molecules and control the residual stresses installation responsible of the residual deformations of the formed parts. The optimisation of the process and the determination of the process window cannot be achieved in a traditional way since it requires a plethora of trials/errors or numerical simulations, because there are many parameters involved in the characterisation of the material and the process. Using reduced order modelling such as the so called Proper Generalised Decomposition method, allows the construction of multi-parametric solution taking into account many parameters. This leads to virtual charts that can be explored on-line in real time in order to perform process optimisation or on-line simulation-based control. Thus, for a given set of parameters, determining the power leading to an optimal temperature becomes easy. However, instead of controlling the power knowing the temperature field by particularizing an abacus, we propose here an approach based on optimal control: we solve by PGD a dual problem from heat equation and optimality criteria. To circumvent numerical issue due to ill-conditioned system, we propose an algorithm based on Uzawa's method. That way, we are able to solve the dual problem, setting the desired state as an extra-coordinate in the PGD framework. In a single computation, we get both the temperature field and the required heat flux to reach a parametric optimal temperature on a given zone.

A biomechanical evaluation to optimize the configuration of a hinged external fixator for the primary treatment of severely displaced intraarticular calcaneus fractures with soft tissue damage.

PubMed

Besch, Lutz; Schmidt, Ina; Mueller, Michael; Daniels-Wredenhagen, Mark; Hilgert, Ralf-Eric; Varoga, Deike; Seekamp, Andreas

2008-01-01

The purpose of this investigation was to develop an optimized hinged external fixator for the primary treatment of dislocated, intra-articular calcaneus fractures with associated soft tissue damage. To this end, a calcaneus model was made out of a polyurethane block, and a steel cylinder served as the ankle joint and was connected to a synthetic model of the tibia via a metal clamp. A saw cut served as the fracture in the model. A Steinmann nail and Schanz screw were placed in defined positions in the model and connected medially and laterally with longitudinal support rods. The fixator allowed a total of 20 degrees of plantar- and dorsiflexion, with rotation in the virtual axis of the upper ankle joint. Changes in the model fracture were measured during cyclical strain, and at different screw positions in the model tibia and calcaneus. Miniature force sensors located on the longitudinal support rods, and a plantar tension spring, were used to measure pressure and tension. Reproducible values were determined and, with the optimal configuration, shifting within the osteotomy was minimal. In the experimental configuration, optimal tibial screw placement was 70 mm proximal to the rotation axis of the upper ankle joint, and optimal placement of the Steinmann nail was in the posterior surface of the calcaneus. These findings indicated that the hinged fixator allows 20 degrees of ankle movement without alteration of the rotation axis, and suggest that this type of external fixator can be used in all types of calcaneal fracture regardless of the soft tissue damage. ACFAS Level of Clinical Evidence: 5c.

[POISONING BY PSYCHOPHARMACOLOGICAL DRUGS IN AZERBAIJAN: THE RESULTS OF 8-YEAR PROSPECTIVE OBSERVATION].

PubMed

Afandiyev, I; Azizov, V

2017-11-01

Acute poisoning of chemical etiology is a significant global public health problem. The aim of this study was the analysis of the toxicoepidemiological structure of psychopharmacological drugs poisoning in Azerbaijan. We collected and analyzed the data on all cases of acute poisoning by psychopharmacological drugs (codes of categories T42/T43 ICD-10) undergoing inpatient treatment at the Center of Clinical Toxicology in Baku, Azerbaijan in 2009-2016. The total number of patients with acute intoxication by psychopharmacological drugs was 3,413, which was 48.3% of all cases of poisoning by drugs, medicaments and biological substances (T36-T50). The predominance of women was registered in all age groups. 1114 patients or 32.6% were in 15-24 years old age group. The highest percentage of poisonings at category T42 of ICD-10 were benzodiazepine-type drugs (35.8%), and at category T43 - antipsychotic and neuroleptic drugs (19.2%). In the structure of benzodiazepine poisoning, the first and second ranked places belonged to phenazepam (71.0%) and clonazepam - 16.6%. In addition, another 120 cases (5.5%) of poisonings in the T42 cohort were caused by "Z drugs", which have similar therapeutic effect to benzodiazepines (zolpidem and zopiclone). Among the antipsychotic and neuroleptic poisonings, thioridazine, trifluoperazine, levomepromazine, chlorpromazine, and periciazine accounted for 91% of all cases of intoxication in this cohort. Barbiturates, in view of their toxicity and narrow range of therapeutic dosages, now lost their importance as antiepileptic and hypnotic drugs. Only 4.9% of all cases of poisoning, classified under category T42, was due to the use of barbiturates (mainly phenobarbital). Poisonings with iminostilbenes were presented by carbamazepine poisoning only. Most patients in this cohort received this anticonvulsant drug as prescribed by a doctor. Acute intoxications by tricyclic antidepressants in 91.5% were presented by cases of amitriptyline poisoning. Intoxication by serotonin reuptake inhibitors antidepressants, were relatively rare (3.8% of all cases of poisoning in T43). Among the poisonings with butyrophenone and thioxanthene neuroleptics, the first ranked place was occupied by cases of haloperidol poisoning, which accounted for 82.6% in this cohort. In the group of intoxications with other antipsychotic and neuroleptic drugs, the first ranked place belonged to the poisoning with clozapine - a total of 83 cases or 47.2% in cohort. Poisonings by psychopharmacological drugs occupy the first ranking place among poisoning by drugs, medicaments and biological substances (T36-T50). Increased control over the prescription and sale of psychopharmacological drugs, a reduction the number of tablets in one package, as well as increased attention to vulnerable groups of the population could be help to reduce the percentage of these poisonings in Azerbaijan.

Cold wave lotion poisoning

MedlinePlus

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

AAPCC Annual Reports

MedlinePlus

... Annual Report 2000 Annual Report 1999 Annual Report Poison Data National Poison Data System Uses for NPDS ... Elements NPDS FAQs Annual Reports Find Your Local Poison Center Poison centers offer free, private, confidential medical ...

Lip moisturizer poisoning

MedlinePlus

... poisoning URL of this page: //medlineplus.gov/ency/article/002723.htm Lip moisturizer poisoning To use the sharing features on this page, please enable JavaScript. This poisoning results from eating or swallowing lip ...

Face powder poisoning

MedlinePlus

... poisoning URL of this page: //medlineplus.gov/ency/article/002700.htm Face powder poisoning To use the sharing features on this page, please enable JavaScript. Face powder poisoning occurs when someone swallows or ...

Rhubarb leaves poisoning

MedlinePlus

... poisoning URL of this page: //medlineplus.gov/ency/article/002876.htm Rhubarb leaves poisoning To use the sharing features on this page, please enable JavaScript. Rhubarb leaves poisoning occurs when someone eats pieces ...

Nail polish poisoning

MedlinePlus

... poisoning URL of this page: //medlineplus.gov/ency/article/002722.htm Nail polish poisoning To use the sharing features on this page, please enable JavaScript. This poisoning is from swallowing or breathing in ( ...

Soman poisoning increases neural progenitor proliferation and induces long-term glial activation in mouse brain.

PubMed

Collombet, Jean-Marc; Four, Elise; Bernabé, Denis; Masqueliez, Catherine; Burckhart, Marie-France; Baille, Valérie; Baubichon, Dominique; Lallement, Guy

2005-03-30

To date, only short-term glial reaction has been extensively studied following soman or other warfare neurotoxicant poisoning. In a context of cell therapy by neural progenitor engraftment to repair brain damage, the long-term effect of soman on glial reaction and neural progenitor division was analyzed in the present study. The effect of soman poisoning was estimated in mouse brains at various times ranging from 1 to 90 days post-poisoning. Using immunochemistry and dye staining techniques (hemalun-eosin staining), the number of degenerating neurons, the number of dividing neural progenitors, and microglial, astroglial or oligodendroglial cell activation were studied. Soman poisoning led to rapid and massive (post-soman day 1) death of mature neurons as assessed by hemalun-eosin staining. Following this acute poisoning phase, a weak toxicity effect on mature neurons was still observed for a period of 1 month after poisoning. A massive short-termed microgliosis peaked on day 3 post-poisoning. Delayed astrogliosis was observed from 3 to 90 days after soman poisoning, contributing to glial scar formation. On the other hand, oligodendroglial cells or their precursors were practically unaffected by soman poisoning. Interestingly, neural progenitors located in the subgranular zone of the dentate gyrus (SGZ) or in the subventricular zone (SVZ) of the brain survived soman poisoning. Furthermore, soman poisoning significantly increased neural progenitor proliferation in both SGZ and SVZ brain areas on post-soman day 3 or day 8, respectively. This increased proliferation rate was detected up to 1 month after poisoning.

Intentional and unintentional poisoning in Pakistan: a pilot study using the Emergency Departments surveillance project

PubMed Central

2015-01-01

Background Acute poisoning is one of the most common reasons for emergency department visits around the world. In Pakistan, the epidemiological data on poisoning is limited due to an under developed poison information surveillance system. We aim to describe the characteristics associated with intentional and unintentional poisoning in Pakistan presenting to emergency departments. Methods The data was extracted from the Pakistan National Emergency Department Surveillance (Pak-NEDS) which was an active surveillance conducted between November 2010 and March 2011. All patients, regardless of age, who presented with poisoning to any of Pakistan's seven major tertiary care centers' emergency departments, were included. Information about patient demographics, type of poisoning agent, reason for poisoning and outcomes were collected using a standard questionnaire. Results Acute poisoning contributed to 1.2% (n = 233) of patients with intentional and unintentional injuries presenting to EDs of participating centers. Of these, 68% were male, 54% were aged 19 to 44 and 19% were children and adolescents (<18 years). Types of poisoning included chemical/gas (43.8%), drug/medicine (27%), alcohol (16.7%) and food/plant (6%). In half of all patients the poisoning was intentional. A total of 11.6% of the patients were admitted and 6.6% died. Conclusion Poisoning causes more morbidity and mortality in young adults in Pakistan compared to other age groups, half of which is intentional. Improving mental health, regulatory control for hazardous chemicals and better access to care through poison information centers and emergency departments will potentially help control the problem. PMID:26691609

Childhood self-poisoning: a one-year review.

PubMed

Neilson, Z E; Morrison, W

2012-11-01

Self-poisoning in children is a serious health concern accounting for 2% and 5% of childhood deaths in the developed and developing world, respectively. Type of poison and intent varies between age groups, with alcohol poisoning becoming increasingly common in teenagers. The aim of the study was to identify the characteristics of paediatric self-poisoning at Ninewells Hospital, Dundee, as a function of age, sex, intent and type of poison. Data from patients under the age of 17 presenting to Ninewells Hospital's Emergency Department with self-poisoning from 1 December 2008 to 30 November 2009 inclusive were identified, classified and analysed using chi-square testing. Overall there was no significant difference in gender. However, females significantly dominated in the ≥12<17 years age group, with older females also significantly more likely to deliberately self-poison. Alcohol was the sole cause of accidental self-poisoning in this age group while paracetamol was used in the majority of cases of deliberate self-poisoning. In the <6 years age group, household chemical ingestion and over-the-counter medications were the most common poisons. The findings reflect previous published data and national trends. The prevalence of alcohol abuse in the ≥12<17 years age group is a major public health issue that must be addressed.

Risk factors for acute pesticide poisoning in Sri Lanka.

PubMed

van der Hoek, Wim; Konradsen, Flemming

2005-06-01

This report describes the characteristics of patients with acute pesticide poisoning in a rural area of Sri Lanka and, for intentional self-poisoning cases, explores the relative importance of the different determinants. Data were collected for 239 acute pesticide-poisoning cases, which were admitted to two rural hospitals in Sri Lanka. Sociodemographic characteristics, negative life events and agricultural practices of the intentional self-poisoning cases were compared with a control group. Most cases occurred among young adults and the large majority (84%) was because of intentional self-poisoning. Case fatality was 18% with extremely high case fatality for poisoning with the insecticide endosulfan and the herbicide paraquat. Cases were generally younger than controls, of lower educational status and were more often unemployed. No agricultural risk factors were found but a family history of pesticide poisoning and having ended an emotional relationship in the past year was clearly associated with intentional self-poisoning. The presence of mental disorders could only be assessed for a subsample of the cases and controls and this showed that alcohol dependence was a risk factor. This study shows that acute pesticide poisoning in Sri Lanka is determined by a combination of sociodemographic and psychological factors. Suggestions are given for interventions that could control the morbidity and mortality due to acute pesticide poisoning in developing countries.

National study of prescription poisoning with psychoactive and nonpsychoactive medications in Medicare/Medicaid dual enrollees age 65 or over.

PubMed

Blackwell, Steven A; Baugh, David K; Ciborowski, Gary M; Montgomery, Melissa A

2011-01-01

The purpose of this study is to assess prescription medication poisoning among psychoactive and nonpsychoactive medications used by elderly (65 years or older) Medicare & Medicaid dual enrollees as well as examine contextual components associated with poisoning. Our primary research goal was to compare medication poisonings among psychoactive medications to nonpsychoactive medications. Our second research goal was to identify components influencing medication poisonings and how they interrelate. The approach used a cross-sectional retrospective review of calendar year 2003 Centers for Medicare & Medicaid Service's Medicaid Pharmacy claims data for elderly dual enrollees. Poisonings were identified based on ICD-9-CM categorizations. Poisonings associated with the psychoactive medications were proportionally over twice as high as compared to nonpsychoactive medications (14.3 per 100,000 enrollees and 6.6 per 100,000 enrollees, respectively). Additionally, the two contextual components of (a) use of many drugs and (b) familiarity with the medication have a direct, but competing impact on poisoning. The reasons behind unintentional poisoning in the elderly have been somewhat a mystery. This study is among the first to attempt to distinguish between poisoning events associated with psychoactive medications versus nonpsychoactive medications as well as assess the impact of differing contextual components on medication poisoning.

[Characterization of severe acute occupational poisoning accidents related to irritating gases in China between 1989 and 2003].

PubMed

Du, Xie-Yi; Zhang, Min; Wang, Huan-Qiang; Li, Tao; Wang, Hong-Fei; Chen, Shu-Yang; Zhang, Shuang; Qin, Jian; Ji, Li-Ying

2006-12-01

To analyze severe acute occupational poisoning accidents related to irritating gases reported in China between 1989 and 2003, and to study the characteristics of severe acute occupational poisoning accidents and provide scientific evidences for prevention and control strategies. The data from the national occupational poisoning case reporting system were analyzed with descriptive methods. (1) There were 92 severe acute occupational poisoning accidents related to asphyxiating gases during 15 years, which showed that there were 14.5 accidents occurred each year. Forty types of chemicals were reported to cause poisoning accidents directly. On average, there were 14.5 persons poisoned and 0.8 persons died of poisoning in each event. The number of death of poisoning reached 7 in most of the severe accidents. Chlorine was the main irritating gas resulting in poisoning accidents according to the number of accidents, cases and death. (1) The severe acute occupational poisoning related to irritating gases are more dangerous than others because of it is involved in more cases in each accident. (2) The accidents have concentricity in the certain types of chemicals, industries and jobs, and should be focused on control. (3) It is important to develop the program about early warning and forecast and the first aid.

Poison Control Centers

MedlinePlus

... 1222 immediately. Name State American Association of Poison Control Centers Address AAPCC Central Office NOT A POISON ... not for emergency use. Arkansas ASPCA Animal Poison Control Center Address 1717 S. Philo Road, Suite 36 Urbana, ...

Jack-in-the-pulpit poisoning

MedlinePlus

... if known Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

[The characteristics and trends of acute pesticide poisoning of Shaoxing in 2006 to 2011].

PubMed

Jiang, Guo-qin; Lian, Ling-jun; Wang, Chun-hui; Li, Ming; Wang, Ji-gang; Pan, Nan-yan; Wang, Sha-sha

2013-07-01

To describe the epidemiological characteristics of acute pesticide poisoning in Shaoxing, China during 2006-2011 and to provide a reference for the prevention and control of pesticide poisoning. The data on pesticide poisoning in Shaoxing during 2006-2011 were obtained from the China Information System for Disease Control and Prevention and were then analyzed. A total of 2024 cases of acute pesticide poisoning were reported in Shaoxing during 2006-2011, and 44 cases were missed, accounting for 2.1% (44/2068) of all cases. Among the 2024 cases, 119 (5.9%) died; the fatality rates of productive poisoning and unproductive poisoning were 1.0% (3/289) and 6.7% (116/1735), respectively. The reported cases included 1038 (51.3%) females and 986 (48.7%) males, and there were no significant differences in the ratio between male and female cases of acute pesticide poisoning from 2006 to 2011 (χ2 = 9.16, P = 0.10). The 2024 cases had a mean age of 47.0±18.7 years; the male cases had a significantly higher mean age than the female cases (50.7±19.0 vs 43.4±17.8 years, t = 9.01, P < 0.001). Among the 2024 cases, 289 (14.3%) suffered productive poisoning, and 1735 (85.7%) suffered unproductive poisoning. In the 986 male cases, 219 (22.2%) suffered productive poisoning; in the 1038 female cases, 968 (93.3%) suffered unproductive poisoning. The pesticides that caused poisoning included insecticide (86.7%, 1754/2024), herbicide (5.1%, 104/2024), rodenticide (3.6%, 72/2024), and bactericide, mixed preparation, biochemical pesticides, and other four categories of pesticides (4.6%, 94/2024); of the 1754 cases caused by insecticide, 1455 (83.0%) were attributed to organophosphorus insecticide. The incidence of unproductive acute pesticide poisoning is high in Shaoxing, and it mainly affects females. Most cases of acute pesticide poisoning are aged 30∼60 years. Insecticide is the main cause of poisoning. It is necessary to enhance health knowledge popularization and safety management of pesticides.

Multimetallic nanoparticle catalysts with enhanced electrooxidation

DOEpatents

Sun, Shouheng; Zhang, Sen; Zhu, Huiyuan; Guo, Shaojun

2015-07-28

A new structure-control strategy to optimize nanoparticle catalysis is provided. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face centered cubic (fcc) structure to chemically ordered face centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu nanoparticles show high CO poisoning resistance, achieve mass activity as high as about 2810 mA/mg Pt, and retain greater than 90% activity after a 13 hour stability test.

NUCLEAR REACTOR

DOEpatents

Breden, C.R.; Dietrich, J.R.

1961-06-20

A water-soluble non-volatile poison may be introduced into a reactor to nullify excess reactivity. The poison is removed by passing a side stream of the water containing the soluble poison to an evaporation chamber. The vapor phase is returned to the reactor to decrease the concentration of soluble poison and the liquid phase is returned to increase the concentration of soluble poison.

Ciguatera fish poisoning

PubMed Central

Crump, J.; McLay, C.; Chambers, S.

1999-01-01

Ciguatera fish poisoning is one of a variety of non-bacterial forms of human seafood poisoning. Consuming large predatory fish from tropical reef ecosystems may be hazardous. We describe a case that is typical of the disease, and illustrates the persistence of neurological symptoms that occur in some patients.


Keywords: ciguatera fish poisoning; ichthyosarcotoxaemia; poisoning; biotoxins PMID:10621882

Eliminating Childhood Lead Poisoning: A Federal Strategy Targeting Lead Paint Hazards.

ERIC Educational Resources Information Center

2000

Noting that lead poisoning is a preventable disease, this report details a coordinated federal program to eliminate childhood lead poisoning in the United States. The report describes how lead poisoning harms children, how pervasive lead poisoning is, and how lead paint hazards in housing could be eliminated in 10 years. Following information on…

Guidelines for the Detection and Management of Lead Poisoning for Physicians and Health Care Providers.

ERIC Educational Resources Information Center

Illinois State Dept. of Public Health, Springfield.

These Illinois guidelines provide information on the medical management and treatment of children with lead poisoning, based on Federal guidelines (revised in 1991) for determining lead poisoning at lower levels. The guidelines outline the effects of lead poisoning, sources of lead, estimated incidence of lead poisoning in Illinois, screening…

49 CFR 172.416 - POISON GAS label.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false POISON GAS label. 172.416 Section 172.416... SECURITY PLANS Labeling § 172.416 POISON GAS label. (a) Except for size and color, the POISON GAS label... POISON GAS label and the symbol must be white. The background of the upper diamond must be black and the...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 172.430 - POISON label.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false POISON label. 172.430 Section 172.430... SECURITY PLANS Labeling § 172.430 POISON label. (a) Except for size and color, the POISON label must be as follows: EC02MR91.029 (b) In addition to complying with § 172.407, the background on the POISON label must...

49 CFR 172.430 - POISON label.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false POISON label. 172.430 Section 172.430... SECURITY PLANS Labeling § 172.430 POISON label. (a) Except for size and color, the POISON label must be as follows: EC02MR91.029 (b) In addition to complying with § 172.407, the background on the POISON label must...

49 CFR 172.416 - POISON GAS label.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false POISON GAS label. 172.416 Section 172.416... SECURITY PLANS Labeling § 172.416 POISON GAS label. (a) Except for size and color, the POISON GAS label... POISON GAS label and the symbol must be white. The background of the upper diamond must be black and the...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 172.416 - POISON GAS label.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false POISON GAS label. 172.416 Section 172.416... SECURITY PLANS Labeling § 172.416 POISON GAS label. (a) Except for size and color, the POISON GAS label... POISON GAS label and the symbol must be white. The background of the upper diamond must be black and the...

49 CFR 172.430 - POISON label.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false POISON label. 172.430 Section 172.430... SECURITY PLANS Labeling § 172.430 POISON label. (a) Except for size and color, the POISON label must be as follows: EC02MR91.029 (b) In addition to complying with § 172.407, the background on the POISON label must...

49 CFR 172.430 - POISON label.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false POISON label. 172.430 Section 172.430... SECURITY PLANS Labeling § 172.430 POISON label. (a) Except for size and color, the POISON label must be as follows: EC02MR91.029 (b) In addition to complying with § 172.407, the background on the POISON label must...

49 CFR 172.416 - POISON GAS label.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false POISON GAS label. 172.416 Section 172.416... SECURITY PLANS Labeling § 172.416 POISON GAS label. (a) Except for size and color, the POISON GAS label... POISON GAS label and the symbol must be white. The background of the upper diamond must be black and the...

49 CFR 172.416 - POISON GAS label.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false POISON GAS label. 172.416 Section 172.416... SECURITY PLANS Labeling § 172.416 POISON GAS label. (a) Except for size and color, the POISON GAS label... POISON GAS label and the symbol must be white. The background of the upper diamond must be black and the...

49 CFR 172.430 - POISON label.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false POISON label. 172.430 Section 172.430... SECURITY PLANS Labeling § 172.430 POISON label. (a) Except for size and color, the POISON label must be as follows: EC02MR91.029 (b) In addition to complying with § 172.407, the background on the POISON label must...

Variability in Treatment for Patients with Cervical Spine Fracture and Dislocation: An Analysis of 107,152 Patients.

PubMed

Wang, Jing; Eltorai, Adam E M; DePasse, J Mason; Durand, Wesley; Reid, Daniel; Daniels, Alan H

2018-06-01

Cervical spine injuries are a common cause of morbidity and mortality; however, the optimal treatment of many of these injuries is debated, and previous studies have shown substantial variation in treatment. We sought to examined treatment variation in arthrodesis and halo/tong placement in cervical spine injury patients over a 12-year period. Data from the Healthcare Cost and Utilization Project National Inpatient Sample, from 2000 to 2011, were used for this study. Patients were identified with a cervical vertebral facture or dislocation based on the International Classification of Diseases, 9th Revision codes. Using χ 2 analysis, spinal arthrodesis rates and halo/tong placement rates were compared between hospitals based on teaching status for patients with and without spinal cord injury (SCI). The records of 107,152 patients with cervical fractures were examined. From 2000 to 2011, the overall arthrodesis rates fell from 25.2% to 20.6% (P < 0.001), and halo/tong placement rates fell from 13.2% to 3.6% (P < 0.001). In patients with cervical fracture without SCI, arthrodesis rates fell from 17.6% to 13.9% (P < 0.001), in cervical fracture patients with SCI, arthrodesis rates rose from 50.0% to 58.9% (P < 0.001), and in cervical dislocation patients, arthrodesis rates rose from 47.6% to 57.5% (P < 0.001). During the 12-year period, teaching hospitals had higher arthrodesis rates compared with nonteaching hospitals for patients with cervical fractures with SCI (57.3% vs. 53.4%, P = 0.001) and higher halo/tong placement rates for patients with cervical dislocations (2.7% vs. 1.7%, P = 0.004). Individual hospital variation showed a 3.5-fold variation in arthrodesis rates in 2000 to 2002, which fell to 3.0-fold by 2009 to 2011. Arthrodesis rates for cervical fracture patients significantly decreased, and arthrodesis rates for cervical dislocation and SCI patients increased from 2000 to 2011, with variability in treatment based on hospital teaching status. Rates of halo/tong placement rapidly decreased for cervical spine trauma at both teaching and nonteaching hospitals. Individual hospital treatment variation also decreased over the study period. Further clinical studies examining the optimal treatment for spine trauma may lead to continued decreases in treatment variability. Copyright © 2018 Elsevier Inc. All rights reserved.

Acute Pesticide Poisoning in Jiangsu Province, China, from 2006 to 2015.

PubMed

Wang, Bo Shen; Chen, Lin; Li, Xiu Ting; Xu, Ming; Zhu, Bao Li; Zhang, Juan

2017-09-01

This study aimed to investigate the characteristics of pesticide poisoning in Jiangsu Province, China, and to provide a scientific basis for developing effective interventional measures and preventive strategies. From 2006 to 2015, a total of 35,308 cases of pesticide poisoning were reported in Jiangsu Province. Non-occupational poisoning accounted for 73.79% of all poisoning cases. A comparison of the data collected before (2006) and after (2015) this study showed a decrease in non-occupational pesticide poisoning. Pesticide poisoning showed an age central tendency of 30 to 44 years, area central tendency for northern Jiangsu, and seasonal central tendency of occupational pesticide poisoning in autumn. Pesticide poisoning remains a major health concern in China. Government agencies together with scientists should focus their efforts on the prevention of potential threats to vulnerable groups such as the elderly, women, and children. Copyright © 2017 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

Estimates of acute pesticide poisoning in agricultural workers in less developed countries.

PubMed

Litchfield, Melville H

2005-01-01

The benefits of crop protection products have to be balanced against the risks to farmers and other agricultural workers handling and applying them. The extent of acute pesticide poisoning in these workers, particularly in less developed countries, has often been based on inadequate information. A number of approaches have been taken by researchers to acquire information on pesticide poisoning. These have resulted in worldwide (global) estimates and regional, localised or field assessments. The methods include descriptive epidemiology, cross-sectional and case studies. Attempts to estimate global pesticide poisonings have often been based upon extrapolations and assumptions from chemical-related fatalities in a small number of countries; such estimates do not provide reliable data. Epidemiological studies, relying mainly on hospital and poison centre data, have been biased towards the more severe poisonings, whereas field studies indicate that occupational pesticide poisoning is associated with less severe and minor effects. Many reports do not adequately distinguish between intentional, accidental and occupational pesticide poisoning statistics or are dominated by cases of intentional (suicidal) poisoning which, by their nature, result in severe or fatal results. The majority of reports do not adequately describe whether individual cases are minor, moderate or severe poisonings. In order to assess information on acute pesticide poisoning in agricultural workers in less developed countries and to draw conclusions on the extent and severity of occupational poisoning, the most recent (post-1990) literature was reviewed. Data were also derived from the World Health Organization (WHO), United Nations Environment Programme (UNEP) and the International Labour Office (ILO). The collected information was analysed to assess the extent and severity of occupational acute pesticide poisoning in less developed countries. Occupational acute pesticide poisonings in these countries are a small proportion of overall reported poisoning and are associated with the more minor effects of pesticides. They are a small proportion (<1-4%) of the several million cases of occupational injuries and ill health in agricultural workers worldwide. However, improvements are required for the collection of acute pesticide poisoning data in less developed countries and in the verification of the circumstances of poisonings and their relative severity. There is the need to move away from further attempts to estimate global data and concentrate instead on obtaining reliable data from realistic crop protection activities.

21 CFR 347.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... called “lip balm.” Poison ivy, oak, sumac dermatitis. An allergic contact dermatitis due to exposure to plants of the genus Rhus (poison ivy, poison oak, poison sumac), which contain urushiol, a potent skin...

21 CFR 347.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... called “lip balm.” Poison ivy, oak, sumac dermatitis. An allergic contact dermatitis due to exposure to plants of the genus Rhus (poison ivy, poison oak, poison sumac), which contain urushiol, a potent skin...

21 CFR 347.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... called “lip balm.” Poison ivy, oak, sumac dermatitis. An allergic contact dermatitis due to exposure to plants of the genus Rhus (poison ivy, poison oak, poison sumac), which contain urushiol, a potent skin...

[Plant poisoning cases in Turkey].

PubMed

Oztekin-Mat, A

1994-01-01

In Turkey, the majority of the population live in rural areas where they use wild plants as food and medicine. The confusion of an edible plant with a poisonous one give rise to serious poisoning which may even result in death. The incidence of plant poisoning in Turkey is about 6% and especially high among children between ages of 2 and 11 living in rural areas. The number of species that cause poisoning is around twenty and Hyoscyamus niger (Solanaceae), Colchicum species (Liliaceae), Conium maculatum (Umbelliferae) and Prunus species (Rosaceae) are the most important. Mushroom poisoning is more frequent in spring and fall. The main reasons are their widespread usage as food and the inexperience of the gatherers in distinguishing the edibles from the poisonous. Amanita phalloides, A. verna, A. muscaria, A. pantherina are responsible for severe cases of poisoning.

Organophosphate acetylcholine esterase inhibitor poisoning from a home-made shampoo

PubMed Central

Sadaka, Yair; Broides, Arnon; Tzion, Raffi Lev; Lifshitz, Matitiahu

2011-01-01

Organophosphate acetylcholine esterase inhibitor poisoning is a major health problem in children. We report an unusual cause of organophosphate acetylcholine esterase inhibitor poisoning. Two children were admitted to the pediatric intensive care unit due to organophosphate acetylcholine esterase inhibitor poisoning after exposure from a home-made shampoo that was used for the treatment of head lice. Owing to no obvious source of poisoning, the diagnosis of organophosphate acetylcholine esterase inhibitor poisoning in one of these patients was delayed. Both patients had an uneventful recovery. Organophosphate acetylcholine esterase inhibitor poisoning from home-made shampoo is possible. In cases where the mode of poisoning is unclear, direct questioning about the use of home-made shampoo is warranted, in these cases the skin and particularly the scalp should be rinsed thoroughly as soon as possible. PMID:21887044

Pesticide poisoning in Zhejiang, China: a retrospective analysis of adult cases registration by occupational disease surveillance and reporting systems from 2006 to 2010

PubMed Central

Zhang, Meibian; Fang, Xinglin; Zhou, Lifang; Su, Liling; Zheng, Jiajia; Jin, Minjuan; Zou, Hua; Chen, Guangdi

2013-01-01

Objective Despite the rapid industrialisation and urbanisation over the past 30 years, agriculture is one of the largest economic sectors in China and the unregulated use of pesticides result in extensive pesticide poisoning. The objective of this study was to analyse pesticide poisoning cases registration received by Zhejiang Provincial Center for Disease Control and Prevention, China. Design Register-based study. Setting Cases registered regarding pesticide poisoning. Data were obtained from the Occupational Disease Surveillance and Reporting Systems in Zhejiang province from 2006 to 2010, which contains anonymous records representing general population of Zhejiang province, China. Participants All cases registered as pesticide poisoning were identified. Primary outcome Monthly and age-group pesticide poisoning death rates were calculated. Results A total of 20 097 pesticide poisoning cases with 1413 deaths were recorded during the study period. There were 10 513 male pesticide poisoning cases with 782 deaths, and 9584 females with 631 deaths. Pesticide poisoning occurred mostly in non-occupational exposure (79.86%), in which the majority (85.77%) of the cases was of intentional pesticide poisoning. The occupational exposure was most common in men during the farming season. The death rate increased stepwise with age, and the pesticide suicide rate was higher in the older age group. Conclusions Pesticide poisoning remains a major health problem in China, and further recommendations to reduce the pesticide poisoning are required. PMID:24270833

Investigating the reliability of substance toxicity information found on the Internet in pediatric poisonings.

PubMed

Kearney, Thomas E; Lieu, Diane; Singer, Nathan; Tsutaoka, Ben; Ho, Raymond; Olson, Kent

2013-12-01

The Internet may be the first source of information used by parents during a suspected poisoning of their children. Our primary aim was to assess the reliability of the Internet as a resource for information for parents to initially manage a suspected poisoning involving their child without outside consultation. We distributed a self-administered survey to English-speaking parents to evaluate their Internet access behaviors so we could emulate their search strategies for a poisoning. A panel of clinical toxicologists performed an evaluation of Websites to determine the proportion that provided accurate and adequate information on common substances involved in poisonings. Of 21 parents surveyed, 15 (71%) used the Internet daily, with Google and Yahoo being the most commonly used search engines. Seven parents (39%) were somewhat to very likely to utilize the Internet during a poisoning scenario with prescription medications involving their child. Overall, only 27 (38%) of the Websites reviewed advised the user to call the poison center with the proper 800 telephone number, whereas no Website provided adequate information to manage the poisoning without outside consultation. Few Websites provided information on the toxic dose (13%), how to determine whether to manage the poisoning at home or in a hospital (22%), or first aid (28%). The information provided on the Internet for substances involved in poisonings is variable and often incomplete. Reliance on the Internet for poisonings could create needless delays and inappropriate assessments and actions to manage a pediatric poisoning incident.

Carbon monoxide poisoning at motels, hotels, and resorts.

PubMed

Weaver, Lindell K; Deru, Kayla

2007-07-01

Each year, more than 200 people in the United States die from carbon monoxide (CO) poisoning. Poisoning has occurred at motels, hotels, and resorts. Congressional mandate requires smoke alarms in all guest rooms; however, smoke alarms do not detect CO. Data on patients poisoned at hotels, motels, and resorts were evaluated at a hyperbaric medicine service. In 2005, legal databases and online news databanks were searched to discover additional incidents. Only victims evaluated in hospitals or declared dead at the scene were included. Cases of intentional poisoning and poisoning from fires were excluded. Between 1989 and 2004, 68 incidents of CO poisoning occurring at hotels, motels, and resorts were identified, resulting in 772 accidentally poisoned: 711 guests, 41 employees or owners, and 20 rescue personnel. Of those poisoned, 27 died, 66 had confirmed sequelae, and 6 had sequelae resulting in a jury verdict. Lodging-operated, faulty room heating caused 45 incidents, pool/spa boilers 16, CO entrained from outdoors 5, and unreported sources caused 2 incidents. Public verdicts have averaged $4.8 million per incident (range, $1 million to $17.5 million). Poisoning occurred at hotels of all classes. Despite these incidents, most properties did not install CO alarms, and requirements for CO alarms at hotels, motels, and resorts are rare. Guests of motels, hotels, and resorts remain at risk for injury or death from CO poisoning. Measures to prevent CO poisoning of guests and employees of the lodging industry should be evaluated.

Volume of home- and community-based services and time to nursing-home placement.

PubMed

Sands, Laura P; Xu, Huiping; Thomas, Joseph; Paul, Sudeshna; Craig, Bruce A; Rosenman, Marc; Doebbeling, Caroline C; Weiner, Michael

2012-01-01

The purpose of this study was to determine whether the volume of Home- and Community-Based Services (HCBS) that target Activities of Daily Living disabilities, such as attendant care, homemaking services, and home-delivered meals, increases recipients' risk of transitioning from long-term care provided through HCBS to long-term care provided in a nursing home. Data are from the Indiana Medicaid enrollment, claims, and Insite databases. Insite is the software system that was developed for collecting and reporting data for In-Home Service Programs. Enrollees in Indiana Medicaid's Aged and Disabled Waiver program were followed forward from time of enrollment to assess the association between the volume of attendant care, homemaking services, home-delivered meals, and related covariates, and the risk for nursing-home placement. An extension of the Cox proportional hazard model was computed to determine the cumulative hazard of nursing-home placement in the presence of death as a competing risk. Of the 1354 Medicaid HCBS recipients followed in this study, 17% did not receive any attendant care, homemaking services, or home-delivered meals. Among recipients who survived through 24 months after enrollment, one in five transitioned from HCBS to a nursing-home. Risk for nursing-home placement was significantly lower for each five-hour increment in personal care (HR=0.95, 95% CI=0.92-0.98) and homemaking services (HR=0.87, 95% CI=0.77-0.99). Future policies and practices that are focused on optimizing long-term care outcomes should consider that a greater volume of HCBS for an individual is associated with reduced risk of nursing-home placement.

The Association Between Premedical Curricular and Admission Requirements and Medical School Performance and Residency Placement: A Study of Two Admission Routes.

PubMed

George, Paul; Park, Yoon Soo; Ip, Julianne; Gruppuso, Philip A; Adashi, Eli Y

2016-03-01

The curricular elements of undergraduate premedical education are the subject of an ongoing debate. The Warren Alpert Medical School of Brown University (AMS) matriculates students via the traditional premedical route (TPM) and an eight-year baccalaureate/MD program-the Program in Liberal Medical Education (PLME)-which provides students with a broad and liberal education. Using the juxtaposition of these two admission routes, the authors aimed to determine whether there is an association between highly distinct premedical curricular and admission requirements and medical school performance and residency placement. The cohorts studied included all of the PLME (n = 295) and TPM (n = 215) students who graduated from the AMS between 2010 and 2015. Outcome variables consisted of multiple measures of medical school performance, including standardized multiple-choice examination scores and honors grades, and residency placement. The authors employed unadjusted tests of averages and proportions (independent t tests and chi-square tests) to compare variables. The TPM students attained marginally, but statistically significantly, higher average scores on standardized multiple-choice examinations than their PLME counterparts. The number of undergraduate premedical science courses completed by PLME students accounted for less than 4% of the variance in key metrics of medical school performance. The residency placement record of the PLME and TPM cohorts proved comparable. These findings suggest that the association between medical school performance and residency placement and undergraduate premedical curricular and admission requirements is weak. Further study is needed to determine the optimal premedical preparation of students.

Two hybrid compaction algorithms for the layout optimization problem.

PubMed

Xiao, Ren-Bin; Xu, Yi-Chun; Amos, Martyn

2007-01-01

In this paper we present two new algorithms for the layout optimization problem: this concerns the placement of circular, weighted objects inside a circular container, the two objectives being to minimize imbalance of mass and to minimize the radius of the container. This problem carries real practical significance in industrial applications (such as the design of satellites), as well as being of significant theoretical interest. We present two nature-inspired algorithms for this problem, the first based on simulated annealing, and the second on particle swarm optimization. We compare our algorithms with the existing best-known algorithm, and show that our approaches out-perform it in terms of both solution quality and execution time.

Study on the treatment of acute thallium poisoning.

PubMed

Zhang, Hong-Tao; Qiao, Bao-Ping; Liu, Bao-Ping; Zhao, Xian-Guo

2014-05-01

Acute thallium poisoning rarely occurs but is a serious and even fatal medical condition. Currently, patients with acute thallium poisoning are usually treated with Prussian blue and blood purification therapy. However, there are few studies about these treatments for acute thallium poisoning. Nine patients with acute thallium poisoning from 1 family were treated successfully with Prussian blue and different types of blood purification therapies and analyzed. Prussian blue combined with sequential hemodialysis, hemoperfusion and/or continuous veno-venous hemofiltration were effective for the treatment of patients with acute thallium poisoning, even after delayed diagnosis. Blood purification therapies help in the clearance of thallium in those with acute thallium poisoning. Prussian blue treatment may do the benefit during this process.

49 CFR 172.400 - General labeling requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 172.411 1.6 EXPLOSIVES 1.6 172.411 2.1 FLAMMABLE GAS 172.417 2.2 NONFLAMMABLE GAS 172.415 2.3 POISON...)) POISON INHALATION HAZARD 172.429 6.1(other than material poisonous by inhalation) POISON 172.430 6.1 (inhalation hazard, Zone A or B) POISON INHALATION HAZARD 172.429 6.1 (other than inhalation hazard, Zone A or...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2014 CFR

2014-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2011 CFR

2011-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 174.680 - Division 6.1 (poisonous) materials with foodstuffs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... not transport any package bearing a POISON or POISON INHALATION HAZARD label in the same car with any... by humans or animals. (b) A carrier must separate any package bearing a POISON label displaying the text “PG III,” or bearing a “PG III” mark adjacent to the POISON label, from materials marked as or...

49 CFR 172.400 - General labeling requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 172.411 1.6 EXPLOSIVES 1.6 172.411 2.1 FLAMMABLE GAS 172.417 2.2 NONFLAMMABLE GAS 172.415 2.3 POISON...)) POISON INHALATION HAZARD 172.429 6.1(other than material poisonous by inhalation) POISON 172.430 6.1 (inhalation hazard, Zone A or B) POISON INHALATION HAZARD 172.429 6.1 (other than inhalation hazard, Zone A or...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2012 CFR

2012-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 174.680 - Division 6.1 (poisonous) materials with foodstuffs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... not transport any package bearing a POISON or POISON INHALATION HAZARD label in the same car with any... by humans or animals. (b) A carrier must separate any package bearing a POISON label displaying the text “PG III,” or bearing a “PG III” mark adjacent to the POISON label, from materials marked as or...

49 CFR 174.680 - Division 6.1 (poisonous) materials with foodstuffs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... not transport any package bearing a POISON or POISON INHALATION HAZARD label in the same car with any... by humans or animals. (b) A carrier must separate any package bearing a POISON label displaying the text “PG III,” or bearing a “PG III” mark adjacent to the POISON label, from materials marked as or...

49 CFR 172.400 - General labeling requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 172.411 1.6 EXPLOSIVES 1.6 172.411 2.1 FLAMMABLE GAS 172.417 2.2 NONFLAMMABLE GAS 172.415 2.3 POISON...)) POISON INHALATION HAZARD 172.429 6.1(other than material poisonous by inhalation) POISON 172.430 6.1 (inhalation hazard, Zone A or B) POISON INHALATION HAZARD 172.429 6.1 (other than inhalation hazard, Zone A or...

49 CFR 174.680 - Division 6.1 (poisonous) materials with foodstuffs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... not transport any package bearing a POISON or POISON INHALATION HAZARD label in the same car with any... by humans or animals. (b) A carrier must separate any package bearing a POISON label displaying the text “PG III,” or bearing a “PG III” mark adjacent to the POISON label, from materials marked as or...

49 CFR 172.400 - General labeling requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 172.411 1.6 EXPLOSIVES 1.6 172.411 2.1 FLAMMABLE GAS 172.417 2.2 NONFLAMMABLE GAS 172.415 2.3 POISON...)) POISON INHALATION HAZARD 172.429 6.1(other than material poisonous by inhalation) POISON 172.430 6.1 (inhalation hazard, Zone A or B) POISON INHALATION HAZARD 172.429 6.1 (other than inhalation hazard, Zone A or...