EPA Facility Registry Service (FRS): Facility Interests Dataset - Intranet Download

EPA Pesticide Factsheets

This downloadable data package consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in the FRS individual feature layers. The layers comprise the FRS major program databases, including:Assessment Cleanup and Redevelopment Exchange System (ACRES) : brownfields sites ; Air Facility System (AFS) : stationary sources of air pollution ; Air Quality System (AQS) : ambient air pollution data from monitoring stations; Bureau of Indian Affairs (BIA) : schools data on Indian land; Base Realignment and Closure (BRAC) facilities; Clean Air Markets Division Business System (CAMDBS) : market-based air pollution control programs; Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) : hazardous waste sites; Integrated Compliance Information System (ICIS) : integrated enforcement and compliance information; National Compliance Database (NCDB) : Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) and the Toxic Substances Control Act (TSCA); National Pollutant Discharge Elimination System (NPDES) module of ICIS : NPDES surface water permits; Radiation Information Database (RADINFO) : radiation and radioactivity facilities; RACT/BACT/LAER Clearinghouse (RBLC) : best available air pollution technology requirements; Resource Conservation and Recovery Act Information System (RCRAInfo) : tracks generators, transporters, treaters, storers, and disposers

EPA Facility Registry Service (FRS): Facility Interests Dataset Download

EPA Pesticide Factsheets

This downloadable data package consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in the FRS individual feature layers. The layers comprise the FRS major program databases, including:Assessment Cleanup and Redevelopment Exchange System (ACRES) : brownfields sites ; Air Facility System (AFS) : stationary sources of air pollution ; Air Quality System (AQS) : ambient air pollution data from monitoring stations; Bureau of Indian Affairs (BIA) : schools data on Indian land; Base Realignment and Closure (BRAC) facilities; Clean Air Markets Division Business System (CAMDBS) : market-based air pollution control programs; Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) : hazardous waste sites; Integrated Compliance Information System (ICIS) : integrated enforcement and compliance information; National Compliance Database (NCDB) : Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) and the Toxic Substances Control Act (TSCA); National Pollutant Discharge Elimination System (NPDES) module of ICIS : NPDES surface water permits; Radiation Information Database (RADINFO) : radiation and radioactivity facilities; RACT/BACT/LAER Clearinghouse (RBLC) : best available air pollution technology requirements; Resource Conservation and Recovery Act Information System (RCRAInfo) : tracks generators, transporters, treaters, storers, and disposers

EPA Facility Registry Service (FRS): Facility Interests Dataset

EPA Pesticide Factsheets

This web feature service consists of location and facility identification information from EPA's Facility Registry Service (FRS) for all sites that are available in the FRS individual feature layers. The layers comprise the FRS major program databases, including:Assessment Cleanup and Redevelopment Exchange System (ACRES) : brownfields sites ; Air Facility System (AFS) : stationary sources of air pollution ; Air Quality System (AQS) : ambient air pollution data from monitoring stations; Bureau of Indian Affairs (BIA) : schools data on Indian land; Base Realignment and Closure (BRAC) facilities; Clean Air Markets Division Business System (CAMDBS) : market-based air pollution control programs; Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) : hazardous waste sites; Integrated Compliance Information System (ICIS) : integrated enforcement and compliance information; National Compliance Database (NCDB) : Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) and the Toxic Substances Control Act (TSCA); National Pollutant Discharge Elimination System (NPDES) module of ICIS : NPDES surface water permits; Radiation Information Database (RADINFO) : radiation and radioactivity facilities; RACT/BACT/LAER Clearinghouse (RBLC) : best available air pollution technology requirements; Resource Conservation and Recovery Act Information System (RCRAInfo) : tracks generators, transporters, treaters, storers, and disposers of haz

Power Up with Methane Gas: Struthers Water Pollution Control Facility

EPA Pesticide Factsheets

The city of Struthers received $5.4 million in ARRA funding from the Ohio’s CWSRF for a project that uses methane gas produced at the Struthers Water Pollution Control Facility to power unit treatment processes and offset the facility’s energy footprint.

[Performance of Grass Swales for Controlling Pollution of Roadway Runoff in Field Experiments].

PubMed

Huang, Jun-jie; Shen, Qing-ran; Li, Tian

2015-06-01

Two different styles of grass swales were built in new Binhu region of Hefei city to monitor the flux and quality of the influent and effluent water under actual precipitation conditions, in order to evaluate the performance of water quality purification and pollution load control for roadway runoff. The results showed that both of the grass swales could effectively remove the pollutants such as TSS, COD, Pb, Cu, Cd, Zn in roadway runoff; the median EMC removal efficiencies of TSS and COD were 67.1%, 46.7% respectively,for facility I, and the median EMC removal efficiencies of TSS and COD were 78.6%, 58.6% respectively, for facility II; the concentrations of Pb, Cu, Zn in the effluent of facility II could meet the requirements of the surface water quality class V; release of nitrogen and phosphorus occurred in both facilities I and I[ in several rainfall events, mainly in heavy storms; the removal efficiencies of TP in the two grass swales were improved with the increase of influent concentration; the mean removal efficiencies of TP in facilities I and II were 14.7% and 45.4%, respectively; the load control performance of facility II for pollutants such as TSS, COD, TP, TN, NH4+ -N and NO3- -N was better than that of facility I; in the district with poor soil permeability and low ground slope, application of dry swale could achieve better performance in water quality control and pollution load reduction of roadway runoff.

40 CFR 20.1 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... air or water pollution control facilities as to which the amortization period began before January 1... Applicability. The regulations of this part apply to certifications by the Administrator of water or air pollution control facilities for purposes of section 169 of the Internal Revenue Code of 1954, as amended...

40 CFR 20.1 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... air or water pollution control facilities as to which the amortization period began before January 1... Applicability. The regulations of this part apply to certifications by the Administrator of water or air pollution control facilities for purposes of section 169 of the Internal Revenue Code of 1954, as amended...

Shell Chemical LP To Install $10 Million In Pollution Monitoring And Control Equipment At Norco Chemical Facility In Louisiana To Resolve Alleged Federal And State Clean Air Violations

EPA Pesticide Factsheets

EPA News Release: Shell Chemical LP To Install $10 Million In Pollution Monitoring And Control Equipment At Norco Chemical Facility In Louisiana To Resolve Alleged Federal And State Clean Air Violations

76 FR 80865 - Approval and Promulgation of State Plans for Designated Facilities and Pollutants; State of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... Promulgation of State Plans for Designated Facilities and Pollutants; State of Florida; Control of Hospital/ Medical/Infectious Waste Incinerator (HMIWI) Emissions From Existing Facilities AGENCY: Environmental... Guidelines (EGs) applicable to existing Hospital/Medical/Infectious Waste Incinerators (HMIWIs). These EGs...

75 FR 57769 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... treatment works (POTWs) and other water pollution control facilities in the United States, as well as an... records cost and technical data associated with POTWs and other water pollution control facilities... mail to: EPA Docket Center, Environmental Protection Agency, Water Docket, 1200 Pennsylvania Ave., NW...

Impact of air pollution control costs on the cost and spatial arrangement of cellulosic biofuel production in the U.S.

PubMed

Murphy, Colin W; Parker, Nathan C

2014-02-18

Air pollution emissions regulation can affect the location, size, and technology choice of potential biofuel production facilities. Difficulty in obtaining air pollutant emission permits and the cost of air pollution control devices have been cited by some fuel producers as barriers to development. This paper expands on the Geospatial Bioenergy Systems Model (GBSM) to evaluate the effect of air pollution control costs on the availability, cost, and distribution of U.S. biofuel production by subjecting potential facility locations within U.S. Clean Air Act nonattainment areas, which exceed thresholds for healthy air quality, to additional costs. This paper compares three scenarios: one with air quality costs included, one without air quality costs, and one in which conversion facilities were prohibited in Clean Air Act nonattainment areas. While air quality regulation may substantially affect local decisions regarding siting or technology choices, their effect on the system as a whole is small. Most biofuel facilities are expected to be sited near to feedstock supplies, which are seldom in nonattainment areas. The average cost per unit of produced energy is less than 1% higher in the scenarios with air quality compliance costs than in scenarios without such costs. When facility construction is prohibited in nonattainment areas, the costs increase by slightly over 1%, due to increases in the distance feedstock is transported to facilities in attainment areas.

Stormwater Pollutant Control from Critical Source Areas

EPA Science Inventory

Critical source areas include: vehicular maintenance facilities, parking lots and bus terminals, junk and lumber yards, industrial storage facilities, loading docks and refueling areas, manufacturing sites, etc. Addressing pollutant runoff from these areas is an important compon...

40 CFR 63.5799 - How do I calculate my facility's organic HAP emissions on a tpy basis for purposes of determining...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production... to incorporation of pollution-prevention control techniques, existing facilities may base the average...

Environmental Pollution Prevention, Control and Abatement

DTIC Science & Technology

1977-08-30

AD-A271 117 fDATE August 30. 1977 ASD (ORA&L) Department of Defense Instruction SUBJECT: Environmental Pollution Prevention, Control and Abatement...Ensure that any funds appropriated and apportioned for the prevention, control, and abatement of environmental pollution are not used for any other...77 References (a) Executive Order 11752, "Prevention, Control, and Abatement of Environmental Pollution at Federal Facilities," December 19, 1973 (b

Performance evaluation on air pollution reducing facilities and mechanism research on the third-party governance on environmental pollution

NASA Astrophysics Data System (ADS)

Bingsheng, Xu; Ling, Lin; Jin, Huang; Geng, Wang; Jianhua, Chen; Shuo, Yang; Huiting, Guo

2017-11-01

The paper focuses on developing the operational efficiency of air pollution reducing facilities and the treatment effect of the third-party governance on environmental pollution. Comprehensive analysis method and influence factor analysis are employed to build an evaluation index system by means of discussing major pollution control factors derived from the performance of pollution control equipment operation, environmental protection, technological economy, recourse consumption and manufacturing management. Based on the pattern of environmental pollution control offered by the third-party company, the static games model is further established between the government and the pollution emission firm by considering the whole process of the pollution abatement including investment, construction and operation of the treatment project, which focuses on establishing the policy condition and consequence by discussing the cost and benefit in a short and a long time, respectively. The research results can improve the market access requests of the pollution control equipment and normalize the environmental protection service offered by the third-party company. Moreover, the establishment of the evaluation index system for pollution control equipment and the evaluation mechanism for the third-party governance on environmental pollution has guiding significance on leading environmental protection industry and promoting market-oriented development

33 CFR 154.730 - Persons in charge: Evidence of designation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... evidence is immediately available at the facility. (Sec. 311(j)(1)(C) of the Federal Water Pollution Control Act (86 Stat. 816, 868); 33 U.S.C. 1161(j)(1)(C); EO 11548, 3 CFR, 1966-1970 Comp., p. 949; 49 CFR... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Facility...

33 CFR 154.730 - Persons in charge: Evidence of designation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... evidence is immediately available at the facility. (Sec. 311(j)(1)(C) of the Federal Water Pollution Control Act (86 Stat. 816, 868); 33 U.S.C. 1161(j)(1)(C); EO 11548, 3 CFR, 1966-1970 Comp., p. 949; 49 CFR... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Facility...

40 CFR 49.10711 - Federal Implementation Plan for the Astaris-Idaho LLC Facility (formerly owned by FMC Corporation...

Code of Federal Regulations, 2013 CFR

2013-07-01

... this section and associated air pollution control equipment, in a manner consistent with good air... practices. (iii) To the maximum extent practicable the air pollution control equipment or processes were..., considering the effect of any proposed air pollution control equipment; and (D) A description of any PM-10...

Determination of a cost-effective air pollution control technology for the control of VOC and HAP emissions from a steroids processing plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamel, T.M.

1997-12-31

A steroids processing plant located in northeastern Puerto Rico emits a combined average of 342 lb/hr of hazardous air pollutants (HAPs) and volatile organic compounds (VOCs) from various process operations. The approach that this facility used to implement maximum achievable control technology (MACT) may assist others who must contend with MACT for pharmaceutical or related manufacturing facilities. Federal air regulations define MACT standards for stationary sources emitting any of 189 HAPs. The MACT standards detailed in the NESHAPs are characterized by industry and type of emission control system or technology. It is anticipated that the standard will require HAP reductionsmore » of approximately 95%. The steroid plant`s emissions include the following pollutant loadings: VOC/HAP Emission Rate (lb/hr): Methanol 92.0; Acetone 35.0; Methylene chloride 126.0; Chloroform 25.0; Ethyl acetate 56.0; Tetrahydrofuran 5.00; and 1,4-Dioxane 3.00. The facility`s existing carbon adsorption control system was nearing the end of its useful life, and the operators sought to install an air pollution control system capable of meeting MACT requirements for the pharmaceutical industry. Several stand-alone and hybrid control technologies were considered for replacement of the carbon adsorption system at the facility. This paper examines the following technologies: carbon adsorption, membrane separation, thermal oxidation, membrane separation-carbon adsorption, and condensation-carbon adsorption. Each control technology is described; the advantages and disadvantages of utilizing each technology for the steroid processing plant are examined; and capital and operating costs associated with the implementation of each technology are presented. The rationale for the technology ultimately chosen to control VOC and HAP emissions is presented.« less

Control Measure Dataset

EPA Pesticide Factsheets

The EPA Control Measure Dataset is a collection of documents describing air pollution control available to regulated facilities for the control and abatement of air pollution emissions from a range of regulated source types, whether directly through the use of technical measures, or indirectly through economic or other measures.

PRELIMINARY COST ESTIMATES OF POLLUTION CONTROL TECHNOLOGIES FOR GEOTHERMAL DEVELOPMENTS

EPA Science Inventory

This report provides preliminary cost estimates of air and water pollution control technologies for geothermal energy conversion facilities. Costs for solid waste disposal are also estimated. The technologies examined include those for control of hydrogen sulfide emissions and fo...

77 FR 3389 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-24

... regulates a mixture of air pollutants including organics (dioxins/furans), carbon monoxide, metals (cadmium... procedure, Air pollution control, Aluminum, Fertilizers, Fluoride, Intergovernmental relations, Paper and...

40 CFR 62.1100 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS California Plan for the... of plan. (a) State of California Designated Facility Plan (Section 111(d) Plan). (b) The plan was... Pollution Control District Regulation 1; Rule 130—Definitions, Rule 240—Permit to Operate, Rule 450—Sulfide...

40 CFR 62.1100 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS California Plan for the... of plan. (a) State of California Designated Facility Plan (Section 111(d) Plan). (b) The plan was... Pollution Control District Regulation 1; Rule 130—Definitions, Rule 240—Permit to Operate, Rule 450—Sulfide...

40 CFR 62.1100 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS California Plan for the... of plan. (a) State of California Designated Facility Plan (Section 111(d) Plan). (b) The plan was... Pollution Control District Regulation 1; Rule 130—Definitions, Rule 240—Permit to Operate, Rule 450—Sulfide...

40 CFR 62.1100 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS California Plan for the... of plan. (a) State of California Designated Facility Plan (Section 111(d) Plan). (b) The plan was... Pollution Control District Regulation 1; Rule 130—Definitions, Rule 240—Permit to Operate, Rule 450—Sulfide...

40 CFR 62.1100 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS California Plan for the... of plan. (a) State of California Designated Facility Plan (Section 111(d) Plan). (b) The plan was... Pollution Control District Regulation 1; Rule 130—Definitions, Rule 240—Permit to Operate, Rule 450—Sulfide...

40 CFR 62.14470 - When must I comply with this subpart if I plan to continue operation of my HMIWI?

Code of Federal Regulations, 2010 CFR

2010-07-01

... FOR DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Hospital/Medical/Infectious... air pollution control equipment or process changes such that the HMIWI is brought on line, and ensuring that all necessary process changes and air pollution control equipment are operating properly. (3...

40 CFR 62.14470 - When must I comply with this subpart if I plan to continue operation of my HMIWI?

Code of Federal Regulations, 2011 CFR

2011-07-01

... FOR DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Hospital/Medical/Infectious... air pollution control equipment or process changes such that the HMIWI is brought on line, and ensuring that all necessary process changes and air pollution control equipment are operating properly. (3...

26 CFR 1.169-2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... facility which (i) is used to abate or control water or atmospheric pollution or contamination by removing... performing multiple functions or used in connection with several plants, etc. (i) If a facility is designed... addition to abating water pollution is installed at a cost of $100,000 in, and is used only in connection...

26 CFR 1.169-2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... facility which (i) is used to abate or control water or atmospheric pollution or contamination by removing... performing multiple functions or used in connection with several plants, etc. (i) If a facility is designed... addition to abating water pollution is installed at a cost of $100,000 in, and is used only in connection...

26 CFR 1.169-2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... facility which (i) is used to abate or control water or atmospheric pollution or contamination by removing... performing multiple functions or used in connection with several plants, etc. (i) If a facility is designed... addition to abating water pollution is installed at a cost of $100,000 in, and is used only in connection...

26 CFR 1.169-2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... facility which (i) is used to abate or control water or atmospheric pollution or contamination by removing... performing multiple functions or used in connection with several plants, etc. (i) If a facility is designed... addition to abating water pollution is installed at a cost of $100,000 in, and is used only in connection...

26 CFR 1.169-2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... facility which (i) is used to abate or control water or atmospheric pollution or contamination by removing... performing multiple functions or used in connection with several plants, etc. (i) If a facility is designed... addition to abating water pollution is installed at a cost of $100,000 in, and is used only in connection...

78 FR 72609 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

..., subpart B and part 62, subpart A. Section 129 of the CAA regulates air pollutants that include organics... pollution control, Aluminum, Fertilizers, Fluoride, Intergovernmental relations, Paper and paper products...

40 CFR 421.90 - Applicability: Description of the metallurgical acid plants subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., primary zinc facilities, primary lead facilities, and primary molybdenum facilities, including any associated air pollution control or gas-conditioning systems for sulfur dioxide off-gases from...

40 CFR 60.54c - Siting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... analysis of the impacts of the affected facility. The analysis shall consider air pollution control... consideration of air pollution control alternatives specified in paragraph (a) of this section. (c) The owner or....54c Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED...

40 CFR 60.54c - Siting requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... analysis of the impacts of the affected facility. The analysis shall consider air pollution control... consideration of air pollution control alternatives specified in paragraph (a) of this section. (c) The owner or....54c Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED...

7 CFR 1781.11 - Other considerations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... department because the water is being polluted from an upstream or other source. (g) Environmental.... Facilities will be designed, installed and operated to prevent pollution of water in excess of established standards. Effluent disposal will conform with appropriate State and Federal Water Pollution Control...

Tracking Emissions Using New Fenceline Monitoring Technology

EPA Pesticide Factsheets

New cost-effective approaches to measuring air pollutants at the fenceline or in communities near industrial facilities can help identify and control air pollution that may drift across property lines.

40 CFR 62.7325 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Hampshire Plan for... Identification of plan. (a) Identification of plan. New Hampshire Plan for the Control of Designated Pollutants...

40 CFR 62.7325 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Hampshire Plan for... Identification of plan. (a) Identification of plan. New Hampshire Plan for the Control of Designated Pollutants...

40 CFR 62.7325 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Hampshire Plan for... Identification of plan. (a) Identification of plan. New Hampshire Plan for the Control of Designated Pollutants...

40 CFR 62.7325 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Hampshire Plan for... Identification of plan. (a) Identification of plan. New Hampshire Plan for the Control of Designated Pollutants...

40 CFR 62.7325 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Hampshire Plan for... Identification of plan. (a) Identification of plan. New Hampshire Plan for the Control of Designated Pollutants...

PROGRAMMABLE EXPOSURE CONTROL SYSTEM FOR DETERMINATION OF THE EFFECTS OF POLLUTANT EXPOSURE REGIMES ON PLANT GROWTH

EPA Science Inventory

A field-exposure research facility was constructed to provide a controlled environment to determine the influence of the various components of ozone exposure on plant response. The facility uses modified open-top chambers and an automated control system for continuous delivery an...

40 CFR 62.10850 - Identification of Plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... from existing sulfuric acid production plants as adopted by the Texas Air Control Board (TACB) on May... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Texas Plan for... Identification of Plan. (a) Identification of plan. Texas Plan for Control of Designated Pollutants from Existing...

Evolving policies to regulate pollution from animal feeding operations.

PubMed

Centner, T J

2001-11-01

Due to concentrations of animals at large facilities, animal feeding operations (AFOs) have emerged as a major potential source of water pollution. The federal government regulates concentrated animal feeding operations under its point-source pollution permitting regulations. A major determinant of whether an operation must apply for a permit is the number of animals at an individual lot or facility. This paper examines federal mandatory controls and voluntary guidelines that seek to reduce contaminant pollution from AFOs. Land treatment practices are delineated due to their importance in reducing the injurious by-products of agricultural production. An evaluation of proposed revisions to federal regulations on confined animal feeding operations suggests they diverge from their goal of controlling water pollution. Federal regulations focus on the size of operation and amount of manure governed by the permitting process to the exclusion of other criteria related to the impairment of water quality. Given the uncertainties about the amount of pollution from AFOs, lack of enforcement of existing regulations, localization of problems, and possible alternatives for addressing the pollution, more demanding federal regulations may not form an appropriate response.

40 CFR 403.19 - Provisions of specific applicability to the Owatonna Waste Water Treatment Facility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... FOR EXIST-ING AND NEW SOURCES OF POLLUTION § 403.19 Provisions of specific applicability to the... Facility is equal to or less than 0.68 pounds per day of chromium, 0.25 pounds per day of copper, 1.17... Noncompliance subject to the publication requirement in § 403.8(f)(2)(vii) at the Minnesota Pollution Control...

40 CFR 55.15 - Specific designation of corresponding onshore areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

40 CFR 55.15 - Specific designation of corresponding onshore areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

40 CFR 55.15 - Specific designation of corresponding onshore areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

40 CFR 55.15 - Specific designation of corresponding onshore areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

40 CFR 55.15 - Specific designation of corresponding onshore areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... corresponding onshore areas. (a) California. (1) The South Coast Air Quality Management District is designated... Air Pollution Control District is designated as the COA for the following OCS facilities: Grace, Gilda, Gail and Gina. (3) The Santa Barbara County Air Pollution Control District is designated as the COA for...

18 CFR 35.25 - Construction work in progress.

Code of Federal Regulations, 2011 CFR

2011-04-01

... public utility applicant to provide for separate customer groups or provide for a rate design... oil or coal burners, soot blowers, bottom ash removal systems and concomitant air pollution control..., which facility would not be necessary if the plant continued to burn gas or oil. (4) Pollution control...

18 CFR 35.25 - Construction work in progress.

Code of Federal Regulations, 2014 CFR

2014-04-01

... public utility applicant to provide for separate customer groups or provide for a rate design... oil or coal burners, soot blowers, bottom ash removal systems and concomitant air pollution control..., which facility would not be necessary if the plant continued to burn gas or oil. (4) Pollution control...

13 CFR 120.370 - Policy.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Pollution Control Program § 120.370 Policy. Section 7(a)(12) of the Act authorizes SBA to guarantee loans up to $1,000,000 to an eligible small business to plan, design or install a pollution control facility. An...

13 CFR 120.370 - Policy.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Pollution Control Program § 120.370 Policy. Section 7(a)(12) of the Act authorizes SBA to guarantee loans up to $1,000,000 to an eligible small business to plan, design or install a pollution control facility. An...

13 CFR 120.370 - Policy.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Pollution Control Program § 120.370 Policy. Section 7(a)(12) of the Act authorizes SBA to guarantee loans up to $1,000,000 to an eligible small business to plan, design or install a pollution control facility. An...

13 CFR 120.370 - Policy.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Pollution Control Program § 120.370 Policy. Section 7(a)(12) of the Act authorizes SBA to guarantee loans up to $1,000,000 to an eligible small business to plan, design or install a pollution control facility. An...

13 CFR 120.370 - Policy.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Special Purpose Loans Pollution Control Program § 120.370 Policy. Section 7(a)(12) of the Act authorizes SBA to guarantee loans up to $1,000,000 to an eligible small business to plan, design or install a pollution control facility. An...

Pollution prevention and the use of low-VOC/HAP coatings at wood furniture manufacturing facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, A.M.; Spaight, J.L.; Jones, J.W.

1999-07-01

Midwest Research Institute, under a cooperative agreement with the Air Pollution Prevention and Control Division of the U.S. Environmental Protection Agency's (EPA's) National Risk Management Research Laboratory, is conducting a study to identify wood furniture and cabinet manufacturing facilities that have converted to low-volatile organic compound/hazardous air pollutant (VOC/HAP) coatings and to develop case studies for those facilities. The case studies include: (1) a discussion of the types of products each facility manufactures; (2) the types of low-VOC/HAP coatings each facility is using; (3) problems encountered in converting to low-VOC/HAP coatings; (4) equipment changes that were required; (5) the costsmore » associated with the conversion process, including capital costs associated with equipment purchases, research and development costs, and operating costs such as operator training in new application techniques; (6) advantages/disadvantages of the low-VOC/HAP coatings; and (7) customer feedback on products finished with the low-VOC/HAP coatings. The primary goals of the project are (1) to demonstrate that low-VOC/HAP coatings can be used successfully by many wood furniture manufacturing facilities, and (2) to assist other wood furniture manufacturing facilities in their conversion to low-VOC/HAP coatings, in particular facilities that do not have the resources to devote to extensive coatings research. This paper discusses the progress of the project and pollution prevention options at wood furniture manufacturing facilities and the regulatory requirements (e.g., the National Emissions Standards for Hazardous Air Pollutants [NESHAP] for Wood Furniture Manufacturing Operations) that these facilities face.« less

40 CFR 20.5 - Applications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... by the facility. (e) If the facility is (or will be) used in connection with more than one plant or... operating unit of the plant or other property most directly associated with the pollution control facility... operation in connection with which the facility is (or will be) used and a description of the specific...

40 CFR 20.5 - Applications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... by the facility. (e) If the facility is (or will be) used in connection with more than one plant or... operating unit of the plant or other property most directly associated with the pollution control facility... operation in connection with which the facility is (or will be) used and a description of the specific...

40 CFR 20.5 - Applications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... by the facility. (e) If the facility is (or will be) used in connection with more than one plant or... operating unit of the plant or other property most directly associated with the pollution control facility... operation in connection with which the facility is (or will be) used and a description of the specific...

40 CFR 20.5 - Applications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... by the facility. (e) If the facility is (or will be) used in connection with more than one plant or... operating unit of the plant or other property most directly associated with the pollution control facility... operation in connection with which the facility is (or will be) used and a description of the specific...

40 CFR 20.5 - Applications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... by the facility. (e) If the facility is (or will be) used in connection with more than one plant or... operating unit of the plant or other property most directly associated with the pollution control facility... operation in connection with which the facility is (or will be) used and a description of the specific...

40 CFR 62.9510 - Identification of sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Oregon Control... sources. The plan applies to all existing MSW landfill facilities in Oregon meeting the requirements as...

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT AT THE U.S. ARMY CORPS OF ENGINEERS JOHN H. KERR DAM AND RESERVOIR - BOYDTON, VIRGINIA

EPA Science Inventory

The report describes the results of pollution prevention opportunity assessments conducted at a representative U.S. Army Corps of Engineers civil works facilities including a flood control reservoir and associated public use areas. ecommended methods for reducing pollution result...

Continuing Environmental Health Education: A Course for Environmental Health Personnel.

ERIC Educational Resources Information Center

Mill, Raymond A.; Walter, William G.

1979-01-01

This lesson is the third of a series of six lessons on general environmental health. The series of multiple choice tests covers administration, food sanitation, vector control, housing, radiation, accident prevention, water supplies, waste disposal, air pollution, noise pollution, occupational health, recreation facilities, and water pollution.…

Industrial Stormwater Fact Sheet Series

EPA Pesticide Factsheets

Fact sheets for the industrial sectors regulated by the MSGP. Each describes the types of facilities included in the sector, typical pollutants associated with the sector, and types of stormwater control measures used to minimize pollutant discharge.

NPDES (National Pollution Discharge & Elimination System) Minor Dischargers

EPA Pesticide Factsheets

As authorized by the Clean Water Act, the National Pollutant Discharge Elimination System (NPDES) permit program controls water pollution by regulating point sources that discharge pollutants into waters of the United States. The NPDES permit program regulates direct discharges from municipal and industrial wastewater treatment facilities that discharge directly into surface waters. The NPDES permit program is part of the Permit Compliance System (PCS) which issues, records, tracks, and regulates point source discharge facilities. Individual homes that are connected to a municipal system, use a septic system, or do not have a surface discharge do not need an NPDES permit. Facilities in PCS are identified as either major or minor. Within the major/minor classification, facilities are grouped into municipals or non-municipals. In many cases, non-municipals are industrial facilities. This data layer contains Minor dischargers. Major municipal dischargers include all facilities with design flows of greater than one million gallons per day; minor dischargers are less that one million gallons per day. Essentially, a minor discharger does not meet the discharge criteria for a major. Since its introduction in 1972, the NPDES permit program is responsible for significant improvements to our Nation's water quality.

Human health risk characterization of petroleum coke calcining facility emissions.

PubMed

Singh, Davinderjit; Johnson, Giffe T; Harbison, Raymond D

2015-12-01

Calcining processes including handling and storage of raw petroleum coke may result in Particulate Matter (PM) and gaseous emissions. Concerns have been raised over the potential association between particulate and aerosol pollution and adverse respiratory health effects including decrements in lung function. This risk characterization evaluated the exposure concentrations of ambient air pollutants including PM10 and gaseous pollutants from a petroleum coke calciner facility. The ambient air pollutant levels were collected through monitors installed at multiple locations in the vicinity of the facility. The measured and modeled particulate levels in ambient air from the calciner facility were compared to standards protective of public health. The results indicated that exposure levels were, on occasions at sites farther from the facility, higher than the public health limit of 150 μg/m(3) 24-h average for PM10. However, the carbon fraction demonstrated that the contribution from the calciner facility was de minimis. Exposure levels of the modeled SO2, CO, NOx and PM10 concentrations were also below public health air quality standards. These results demonstrate that emissions from calcining processes involving petroleum coke, at facilities that are well controlled, are below regulatory standards and are not expected to produce a public health risk. Copyright © 2015 Elsevier Inc. All rights reserved.

40 CFR 62.14575 - What must I do if I close my CISWI unit and then restart it?

Code of Federal Regulations, 2011 CFR

2011-07-01

... FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration... necessary process changes and air pollution control devices operate as designed. Waste Management Plan ...

78 FR 63929 - Approval and Promulgation of Air Quality Implementation Plans; Texas; Revisions to Rules and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... for Control of Air Pollution; Permitting of Grandfathered Facilities AGENCY: Environmental Protection... grandfathered facilities obtain specific permits which include emission control methods to achieve mandated... or contact information unless you provide it in the body of your comment. If you send an email...

CLEANING OF FLUE GASES FROM WASTE COMBUSTORS

EPA Science Inventory

The paper addresses flue gas cleaning processes currently used commercially in waste combustion facilities. It also discusses the operating concepts of dry, semi-dry, and wet processes and their effectiveness in controlling various pollutants. Air pollutants from the combustion o...

EPA Policy for Innovative Environmental Technologies at Federal Facilities

EPA Pesticide Factsheets

This is a memo from the EPA Administrator, regarding the unique opportunities for the development and application of innovative technologies and approaches to pollution prevention, source control, site investigation, and remediation at Federal facilities.

40 CFR 60.5415 - How do I demonstrate continuous compliance with the standards for my gas well affected facility...

Code of Federal Regulations, 2013 CFR

2013-07-01

... plants? 60.5415 Section 60.5415 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR..., and unavoidable failure of air pollution control equipment, process equipment, or a process to operate... control systems were kept in operation if at all possible, consistent with safety and good air pollution...

40 CFR 62.7851 - Identification of sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Air Pollution Control Division dated November 23, 2004, certifying that there are no existing sulfuric... Section 62.7851 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Mexico...

40 CFR 62.7851 - Identification of sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Air Pollution Control Division dated November 23, 2004, certifying that there are no existing sulfuric... Section 62.7851 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Mexico...

40 CFR 62.7851 - Identification of sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Air Pollution Control Division dated November 23, 2004, certifying that there are no existing sulfuric... Section 62.7851 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Mexico...

Innovation for Pollution Control

NASA Technical Reports Server (NTRS)

1986-01-01

Kinetic Controls Inc.'s refuse-fired steam generating facility led to the development of an air pollution equipment control device. The device is currently marketed by two NASA/Langley Research Center employees. It automatically senses and compensates for the changes in smoke composition when refuse is used as a fuel by adjusting the precipitator's voltage and current to permit maximum collection of electrically charged dust particles. The control adapts to any electrostatic precipitator and should have extensive commercial applications.

COSTS OF URBAN STORMWATER CONTROL

EPA Science Inventory

This report presents information on the cost of stormwater pollution control facilities in urban areas, including collection, control, and treatment systems. Information on prior cost studies of control technologies and cost estimating models used in these studies was collected,...

COSTS OF URBAN STORMWATER CONTROL

EPA Science Inventory

This paper presents information on the cost of stormwater pollution control facilities in urban areas, including collection, control, and treatment systems. Information on prior cost studies of control technologies and cost estimating models used in these studies was collected, r...

Environmental Law Deskbook

DTIC Science & Technology

1991-10-01

Agency FFA Federal Facilities Agreement FFCA Federal Facilities Compliance Agreement FGD Flue Gas Desulfurization FIFRA Federal Insecticide, Fungicide...carrying out response. If none, state why. EXAMPLE: Gas barriers used to control and contain vapor emissions. Runoff contained by excavating ditch...NPDES PERMITS 20-2 2006 WATER QUALITY STANDARDS 20-2 2007 POLLUTION CONTROL TECHNOLOGY 20-3 2008 TECHNOLOGY VARIANCE AND MODIFICATIONS 20-4 2009

40 CFR 21.3 - Submission of applications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Francisco, CA 94105 Arizona, California, Hawaii, Nevada, the territories of American Samoa and Guam; the... or the State Water Pollution Control Authority in which the facility is located. (c) An application... of the process or activity generating the pollution to be abated by the additions, alterations, or...

40 CFR 21.3 - Submission of applications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Francisco, CA 94105 Arizona, California, Hawaii, Nevada, the territories of American Samoa and Guam; the... or the State Water Pollution Control Authority in which the facility is located. (c) An application... of the process or activity generating the pollution to be abated by the additions, alterations, or...

40 CFR 21.3 - Submission of applications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... St., San Francisco, CA 94105 Arizona, California, Hawaii, Nevada, the territories of American Samoa... Administrator or the State Water Pollution Control Authority in which the facility is located. (c) An... description of the process or activity generating the pollution to be abated by the additions, alterations, or...

40 CFR 21.3 - Submission of applications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Francisco, CA 94105 Arizona, California, Hawaii, Nevada, the territories of American Samoa and Guam; the... or the State Water Pollution Control Authority in which the facility is located. (c) An application... of the process or activity generating the pollution to be abated by the additions, alterations, or...

Fire Fighter Trainer Environmental Considerations

DTIC Science & Technology

1981-01-08

established by the Environmental Protection Agency and various state and local ordinances. At present, the Navy’s fire fighter train- ing facilities use...necessary. All operational capabilities for military communications equipment have been retained. Each training compartment has a local communications...the state or local air pollution-control agencies on a case-by-case basis. 4.2.4 Japanese Air Pollution-Control Regulations. The Japanese Air Quality

Virginia Agency Agrees to Stormwater Controls

EPA Pesticide Factsheets

In agreements with EPA, the Virginia Department of Transportation (VDOT) has made a state- and agency-wide commitment to improve stormwater pollution controls and practices for roads, facilities and construction sites it manages.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Savoie, M.J.; Schanche, G.W.; Mikucki, W.J.

This report provides technical information on modular solid-waste heat-recovery incinerators (HRIs), air-pollution regulations that apply to HRIs, air-pollutant emissions from currently marketed HRIs, and air-polution-control techniques for HRIs. The information will be useful to Army installations, Major Commands, and Corps of Engineers Districts that must plan and design HRI facilities.

40 CFR 62.10626 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Identification of plan. 62.10626 Section 62.10626 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Tennessee Plan for the Control of Designated Pollutants from...

77 FR 40318 - Availability of Addendum to Documentation Supporting the Proposal of the Leeds Metal Site to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-09

... trichloroethylene (TCE) attributable to waste piles and contaminated soil at the Leeds Metal facility resulting in a... Environmental protection, Air pollution control, Chemicals, Hazardous substances, Hazardous waste, Intergovernmental relations, Natural resources, Oil pollution, Penalties, Reporting and recordkeeping requirements...

Considerations for evaluating controlled exposure studies of tree seedlings.

Treesearch

E. Charles Peterson; A. Robert Mickler

1994-01-01

Tree seedling exposure studies, covering a wide range of experimental conditions in pollutant treatments, species, facilities, and exposure regimes, have been conducted during the past several years to determine acute effects and relative sensitivity of tree species in response to simulated acid precipitation and gaseous pollutants. Because of tile difficulties...

40 CFR 60.57c - Monitoring requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 60.57c Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... date, time, and duration. (d) The owner or operator of an affected facility using an air pollution... § 60.52c undergoes an initial air pollution control device inspection that is at least as protective as...

K-BREF(Korean BAT reference document) development : BAT and BAT-AELs for large combustion plants and waste incinerators in Korea.

NASA Astrophysics Data System (ADS)

Yoo, Heungmin; Lee, Daegyun; Park, Jaehong

2017-04-01

Since the initial environmental policy namely "Regulation on assigning license for environmental pollutant emission facilities" was introduced in 1971, the previous environmental policy that assign licenses on emission facilities of each pollutant has been implementing in Korea. From this, economic standard and environmental quality of Korea are recognized as level of developed countries, even though various development activities for industrialization. However, amount of pollutant, emission route and emission source are increasing with development of various industries, and citizens recognition for environment have been changed as well. Thus, ministry of environment of Korea needs systematic policy based on scientific grounds for conversion of paradigm. For this, ministry of environment was introduced new policy namely "integrated pollution prevention and control(IPPC)", and it will be implemented from 2017 in Korea. IPPC is established for considering environment, economic and efficiency: 10 licenses on each pollutant emission will be integrated to one license, and it can be expected simplification for business licensing process. As well, this policy can be upgraded and processed while considering characteristics on location and industry types, in the future. However, to conduct this system harmoniously, policy demanders have to apply integrated control system to their facilities. Especially, the first applied industries by IPPC are two industries, such as large combustion plants for power generation and waste incineration facilities. Therefore, ministry of environment has to publish technical guideline books firstly for those industries, and they were named to "BAT reference document(BREF)". In this study, essential information for BREFs publishment, that is including emission levels, best available technique(BAT) and so on was investigated. In addition, the BAT-associated emission levels (BAT-AELs) of each industry were set using emission data obtained from realtime-monitoring system.

40 CFR 62.10100 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS South Carolina... Identification of plan. (a) Identification of plan. South Carolina Designated Facility Plan (Section 111(d) Plan). (b) The plan was officially submitted as follows: (1) Implementation Plan for Control of Designated...

FACILITY POLLUTION PREVENTION GUIDE

EPA Science Inventory

The U.S. Environmental Protection Agency (U.S. EPA) has developed the Facility Pollution Prevention Guide for those who are interested in and responsible for pollution prevention in industrial or service facilities. t summarizes the benefits of a company-wide pollution prevention...

76 FR 1525 - Approval and Promulgation of Air Quality Implementation Plans; Texas; Revisions to Rules and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-11

... Pollution; Permitting of Grandfathered and Electing Electric Generating Facilities AGENCY: Environmental... permitting procedures for grandfathered electric generating facilities (EGFs). The revisions address a... emissions increases of carbon monoxide (CO) created by the imposition of technology controls to be permitted...

40 CFR 62.8350 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS North Carolina Plan for... Identification of plan. (a) Identification of plan. North Carolina Designated Facility Plan (Section 111(d) Plan). (b) The plan was officially submitted as follows: (1) Control of sulfuric acid mist emissions from...

Municipal sludge composting facility emissions -- comparison of wet scrubber and biofiltration control performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holzman, M.I.; Gammie, L.A.; Gilbert, P.E.

1997-12-31

The Metropolitan District (MDC) Water Pollution Control Plant located in Hartford, Connecticut operates a state-of-the-art composting facility to process municipal sewage sludge. An air emissions test program was performed to determine emission rates of criteria and non-criteria pollutants and to evaluate the performance of two types of emissions/odor control systems (biofiltration and wet scrubbing). The purpose of this report is to further the limited available emissions and control performance data on a municipal sewage sludge composting facility operation. The MDC`s sludge composting facility consists of a Biocell train and a Cure Cell train, each of which can currently receive approximatelymore » 20 wet tons per hour of sludge at 60% of full capacity. The minimum retention time in each train is 10.5 days. Air emissions from the Biocell train are treated by both a biofiltration system and a three-stage wet scrubber system. The biofilter and wet scrubber system operate in parallel, so as to allow direct comparison of performance. Emissions from the Cure Cell train are treated by a single biofiltration system. The wet scrubber system consists of a first stage reducing absorber (ammonia solution), followed by a second stage oxidation absorber (sodium hypochlorite and sulfuric acid), and a final residual scrubber (sodium hydroxide solution). The two biofiltration systems are identically sized at 10,000 square feet surface area and three feet depth. The emissions testing program was designed to obtain simultaneous inlet and outlet data across each control device. The measured pollutants included organo-sulfides, alcohols, aldehydes, ketones, pinenes, terpenes, total reduced sulfur compounds, chlorinated hydrocarbons, sulfuric acid, sodium hydroxide, ammonia, carbon monoxide and volatile organic compounds.« less

40 CFR 412.12 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... effluent limitations representing the application of BPT: There shall be no discharge of process waste water pollutants to navigable waters. (b) Process waste pollutants in the overflow may be discharged to... waste water from a facility designed, constructed and operated to contain all process generated waste...

40 CFR 403.19 - Provisions of specific applicability to the Owatonna Waste Water Treatment Facility.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GENERAL PRETREATMENT REGULATIONS FOR EXISTING AND NEW SOURCES OF POLLUTION § 403.19 Provisions of specific applicability to the... Noncompliance subject to the publication requirement in § 403.8(f)(2)(vii) at the Minnesota Pollution Control...

Pollution Measuring System

NASA Technical Reports Server (NTRS)

1980-01-01

Research Ventures, Inc.'s visiplume is a portable, microprocessor-controlled air pollution monitor for measuring sulfur dioxide emissions from fossil fuel-fired power plants, and facilities that manufacture sulfuric acid. It observes smokestack plumes at a distance from the stack obviating the expense and difficulty of installing sample collectors in each stack and later analyzing the samples.

75 FR 64235 - Approval and Promulgation of Air Quality Implementation Plans; Texas; Revisions to Rules and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-19

... Pollution; Permitting of Grandfathered and Electing Electric Generating Facilities AGENCY: Environmental... permitting procedures for grandfathered electric generating facilities (EGFs). The revisions address a... increases of carbon monoxide (CO) created by the imposition of technology controls to be permitted under the...

7 CFR 1980.451 - Filing and processing applications.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... (k) Certificate of need. If the loan request is for health care facilities (e.g., hospitals or... schools, water, sewer and health care services, and if so, the community's plan for providing such... Certificate of Need (Health Care Facilities) 3 Clean Air and Water Pollution Control Act Requirements...

7 CFR 1980.451 - Filing and processing applications.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of the subpart. (k) Certificate of need. If the loan request is for health care facilities (e.g... schools, water, sewer and health care services, and if so, the community's plan for providing such... Certificate of Need (Health Care Facilities) 3 Clean Air and Water Pollution Control Act Requirements...

7 CFR 1980.451 - Filing and processing applications.

Code of Federal Regulations, 2014 CFR

2014-01-01

... of the subpart. (k) Certificate of need. If the loan request is for health care facilities (e.g... schools, water, sewer and health care services, and if so, the community's plan for providing such... Certificate of Need (Health Care Facilities) 3 Clean Air and Water Pollution Control Act Requirements...

7 CFR 1980.451 - Filing and processing applications.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of the subpart. (k) Certificate of need. If the loan request is for health care facilities (e.g... schools, water, sewer and health care services, and if so, the community's plan for providing such... Certificate of Need (Health Care Facilities) 3 Clean Air and Water Pollution Control Act Requirements...

40 CFR 60.7 - Notification and record keeping.

Code of Federal Regulations, 2010 CFR

2010-07-01

... control systems, productive capacity of the facility before and after the change, and the expected... submitted for each pollutant monitored at each affected facility. (1) If the total duration of excess emissions for the reporting period is less than 1 percent of the total operating time for the reporting...

40 CFR 60.7 - Notification and record keeping.

Code of Federal Regulations, 2013 CFR

2013-07-01

... control systems, productive capacity of the facility before and after the change, and the expected... submitted for each pollutant monitored at each affected facility. (1) If the total duration of excess emissions for the reporting period is less than 1 percent of the total operating time for the reporting...

40 CFR 60.7 - Notification and record keeping.

Code of Federal Regulations, 2011 CFR

2011-07-01

... control systems, productive capacity of the facility before and after the change, and the expected... submitted for each pollutant monitored at each affected facility. (1) If the total duration of excess emissions for the reporting period is less than 1 percent of the total operating time for the reporting...

40 CFR 60.7 - Notification and record keeping.

Code of Federal Regulations, 2014 CFR

2014-07-01

... control systems, productive capacity of the facility before and after the change, and the expected... submitted for each pollutant monitored at each affected facility. (1) If the total duration of excess emissions for the reporting period is less than 1 percent of the total operating time for the reporting...

40 CFR 60.7 - Notification and record keeping.

Code of Federal Regulations, 2012 CFR

2012-07-01

... control systems, productive capacity of the facility before and after the change, and the expected... submitted for each pollutant monitored at each affected facility. (1) If the total duration of excess emissions for the reporting period is less than 1 percent of the total operating time for the reporting...

COSTS OF BEST MANAGEMENT PRACTICES AND ASSOCIATED LAND FOR URBAN STORMWATER CONTROL

EPA Science Inventory

The purpose of this paper is to present information on the cost of stormwater pollution control facilities in urban areas, including collection, control, and treatment systems. Information on prior cost studies of control technologies and cost estimating models used in these stu...

7 CFR 1781.5 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-01-01

... loans. (3) Land use zoning. (4) Acquiring necessary property, lands, and rights. (5) Obtaining approval... construction facilities. (6) Health and sanitation standards, water pollution control, and environmental...

7 CFR 1781.5 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-01-01

... loans. (3) Land use zoning. (4) Acquiring necessary property, lands, and rights. (5) Obtaining approval... construction facilities. (6) Health and sanitation standards, water pollution control, and environmental...

Toxic exposure in America: estimating fetal and infant health outcomes from 14 years of TRI reporting.

PubMed

Agarwal, Nikhil; Banternghansa, Chanont; Bui, Linda T M

2010-07-01

We examine the effect of exposure to a set of toxic pollutants that are tracked by the Toxic Release Inventory (TRI) from manufacturing facilities on county-level infant and fetal mortality rates in the United States between 1989 and 2002. Unlike previous studies, we control for toxic pollution from both mobile sources and non-TRI reporting facilities. We find significant adverse effects of toxic air pollution concentrations on infant mortality rates. Within toxic air pollutants we find that releases of carcinogens are particularly problematic for infant health outcomes. We estimate that the average county-level decreases in various categories of TRI concentrations saved in excess of 13,800 infant lives from 1989 to 2002. Using the low end of the range for the value of a statistical life that is typically used by the EPA of $1.8M, the savings in lives would be valued at approximately $25B.

77 FR 50717 - Notice of Lodging of Proposed Consent Decree and Settlement Agreement Under the Comprehensive...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... the Comprehensive Environmental Response, Compensation, and Liability Act and Federal Water Pollution... Federal Water Pollution Control Act (``Clean Water Act''), 33 U.S.C. 1321(f), related to the release or... resource damages under CERCLA and the Clean Water Act at the former EPT manufacturing facility in Joplin...

75 FR 63093 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Compliance...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-14

... the compliance date by which facilities must address milk and milk product containers, associated... facility must comply with the SPCC requirements for these milk and milk product containers is delayed one... containers, associated piping and appurtenances, or as specified by a rule that otherwise establishes a...

Federal Guidelines - Operation and Maintenance of Wastewater Treatment Facilities.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Water Programs.

This document contains the federal guidelines for meeting the specific requirements of the Federal Water Pollution Control Act Amendments of 1972. These guidelines are also intended to assist in meeting the regulations for grant assisted facility construction and to provide information on the key elements to be included in the operation plans for…

COMBUSTION CONTROL OF TRACE ORGANIC AIR POLLUTANTS FROM MUNICIPAL WASTE COMBUSTORS

EPA Science Inventory

The US Environmental Protection Agency (EPA) is considering the use of combustion techniques for controlling air emissions of chlorinated dioxins, chlorinated furans, and other trace organics from municipal waste combustion (MWC) facilities. Recommendations for good combustion pr...

36 CFR 6.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ashes, but not including metal or plastic. Solid waste means garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded...

36 CFR 6.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ashes, but not including metal or plastic. Solid waste means garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded...

[Odor pollution from landfill sites and its control: a review].

PubMed

Hu, Bin; Ding, Ying; Wu, Wei-Xiang; Hu, Bei-Gang; Chen, Ying-Xu

2010-03-01

Landfill sites are the major sources of offensive odor in urban public facilities. With the progress of urbanization and the residents' demands for a higher living environment quality, the odor emission from landfill sites has become a severe pollution problem, and the odor control at landfill sites has been one of the research hotspots. This paper summarized the main components and their concentrations of the odor from landfill sites, and expatiated on the research progress in the in-situ control of the odor. The further research directions in in-situ control of the odor from landfill sites were prospected.

METAL FINISHING FACILITY POLLUTION PREVENTION TOOL (MFFPPT)

EPA Science Inventory

The Metal Finishing Facility Pollution Tool (MFFPPT) is being developed to allow the metal finishing industry an easy method to evaluate potential pollution prevention options. In order to reduce the quantity of pollutants generated by a process, the sources of pollutants within ...

Brewer, Maine Wastewater Treatment Plant Recognized for Excellence

EPA Pesticide Factsheets

The Brewer Water Pollution Control Facility was recently honored with a 2015 Regional Wastewater Treatment Plant Excellence Award by the US Environmental Protection Agency's New England regional office.

Corrosion detector apparatus for universal assessment of pollution in data centers

DOEpatents

Hamann, Hendrik F.; Klein, Levente I.

2015-08-18

A compact corrosion measurement apparatus and system includes an air fan, a corrosion sensor, a temperature sensor, a humidity sensor, a heater element, and an air flow sensor all under control to monitor and maintain constant air parameters in an environment and minimize environmental fluctuations around the corrosion sensor to overcome the variation commonly encountered in corrosion rate measurement. The corrosion measurement apparatus includes a structure providing an enclosure within which are located the sensors. Constant air flow and temperature is maintained within the enclosure where the corrosion sensor is located by integrating a variable speed air fan and a heater with the corresponding feedback loop control. Temperature and air flow control loops ensure that corrosivity is measured under similar conditions in different facilities offering a general reference point that allow a one to one comparison between facilities with similar or different pollution levels.

EPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL - 2002

EPA Science Inventory

To help metal finishing facilities meet the goal of profitable pollution prevention, the USEPA is developing the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), a computer program that estimates the rate of solid, liquid waste generation and air emissions. This progr...

40 CFR 62.3652 - Effective date.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Indiana Metals, Acid Gases, Organic... effective December 1, 2008. [73 FR 56983, Oct. 1, 2008] Control of Air Emissions From Existing Commercial...

109(b) State Training Center Facility Assessment, Program Evaluation, and Guide Development. Final Report.

ERIC Educational Resources Information Center

Miklas, Michael P., Jr.

Section 109(b) of the 1972 Federal Water Pollution Control Act Amendments authorized funding for the construction of statewide water treatment training facilities. Described in this report is work conducted by Southwest Research Institute (SwRI) to: (1) aid in developing updated 109(b) Guidance Documents; (2) characterize and evaluate existing…

Nature of air pollution, emission sources, and management in the Indian cities

NASA Astrophysics Data System (ADS)

Guttikunda, Sarath K.; Goel, Rahul; Pant, Pallavi

2014-10-01

The global burden of disease study estimated 695,000 premature deaths in 2010 due to continued exposure to outdoor particulate matter and ozone pollution for India. By 2030, the expected growth in many of the sectors (industries, residential, transportation, power generation, and construction) will result in an increase in pollution related health impacts for most cities. The available information on urban air pollution, their sources, and the potential of various interventions to control pollution, should help us propose a cleaner path to 2030. In this paper, we present an overview of the emission sources and control options for better air quality in Indian cities, with a particular focus on interventions like urban public transportation facilities; travel demand management; emission regulations for power plants; clean technology for brick kilns; management of road dust; and waste management to control open waste burning. Also included is a broader discussion on key institutional measures, like public awareness and scientific studies, necessary for building an effective air quality management plan in Indian cities.

33 CFR 154.2108 - Vapor-moving devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Marine Vapor Control Systems Transfer... vibration; (4) Low lube oil level; (5) Low lube oil pressure; and (6) Excessive shaft bearing temperature...

33 CFR 154.826 - Vapor compressors and blowers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Vapor Control Systems § 154... chamber or cylinder; (2) Excessive cooling water temperature; (3) Excessive vibration; (4) Low lube oil...

33 CFR 154.826 - Vapor compressors and blowers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Vapor Control Systems § 154... chamber or cylinder; (2) Excessive cooling water temperature; (3) Excessive vibration; (4) Low lube oil...

33 CFR 154.826 - Vapor compressors and blowers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Vapor Control Systems § 154... chamber or cylinder; (2) Excessive cooling water temperature; (3) Excessive vibration; (4) Low lube oil...

40 CFR 92.912 - Staged-assembly exemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to complete production of your engines at different facilities, as long as you maintain control of the engines until they are in their certified configuration. We may require you to take specific steps... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Exclusion and Exemption...

40 CFR 62.3660 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Indiana Control of Air Emissions from Existing Commercial and Industrial Solid Waste Incinerator Units § 62.3660 Identification of plan. On December 20, 2002, Indiana submitted a plan to control emissions from Commercial and...

Control technology appendices for pollution control technical manuals. Final report, June 1982-February 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-04-01

The document is one of six technical handbooks prepared by EPA to help government officials granting permits to build synfuels facilities, synfuels process developers, and other interested parties. They provide technical data on waste streams from synfuels facilities and technologies capable of controlling them. Process technologies covered in the manuals include coal gasification, coal liquefaction by direct and idirect processing, and the extraction of oil from shale. The manuals offer no regulatory guidance, allowing the industry flexibility in deciding how best to comply with environmental regulations.

The Impact of Pollution Prevention on Toxic Environmental Releases from U.S. Manufacturing Facilities.

PubMed

Ranson, Matthew; Cox, Brendan; Keenan, Cheryl; Teitelbaum, Daniel

2015-11-03

Between 1991 and 2012, the facilities that reported to the U.S. Environmental Protection Agency's Toxic Release Inventory (TRI) Program conducted 370,000 source reduction projects. We use this data set to conduct the first quasi-experimental retrospective evaluation of how implementing a source reduction (pollution prevention) project affects the quantity of toxic chemicals released to the environment by an average industrial facility. We use a differences-in-differences methodology, which measures how implementing a source reduction project affects a facility's releases of targeted chemicals, relative to releases of (a) other untargeted chemicals from the same facility, or (b) the same chemical from other facilities in the same industry. We find that the average source reduction project causes a 9-16% decrease in releases of targeted chemicals in the year of implementation. Source reduction techniques vary in effectiveness: for example, raw material modification causes a large decrease in releases, while inventory control has no detectable effect. Our analysis suggests that in aggregate, the source reduction projects carried out in the U.S. since 1991 have prevented between 5 and 14 billion pounds of toxic releases.

Probability mass first flush evaluation for combined sewer discharges.

PubMed

Park, Inhyeok; Kim, Hongmyeong; Chae, Soo-Kwon; Ha, Sungryong

2010-01-01

The Korea government has put in a lot of effort to construct sanitation facilities for controlling non-point source pollution. The first flush phenomenon is a prime example of such pollution. However, to date, several serious problems have arisen in the operation and treatment effectiveness of these facilities due to unsuitable design flow volumes and pollution loads. It is difficult to assess the optimal flow volume and pollution mass when considering both monetary and temporal limitations. The objective of this article was to characterize the discharge of storm runoff pollution from urban catchments in Korea and to estimate the probability of mass first flush (MFFn) using the storm water management model and probability density functions. As a result of the review of gauged storms for the representative using probability density function with rainfall volumes during the last two years, all the gauged storms were found to be valid representative precipitation. Both the observed MFFn and probability MFFn in BE-1 denoted similarly large magnitudes of first flush with roughly 40% of the total pollution mass contained in the first 20% of the runoff. In the case of BE-2, however, there were significant difference between the observed MFFn and probability MFFn.

78 FR 38970 - California State Nonroad Engine Pollution Control Standards; Within-the-Scope Determination for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and... Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and...-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities Where TRUs Operate Be...

IMPLEMENTATION OF USEPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL (MFFP2T) - 2003

EPA Science Inventory

To help metal finishing facilities meet the goal of profitable pollution prevention, the USEPA is developing the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), a computer program that estimates the rate of solid, liquid waste generation and air emissions. This progr...

POLLUTION PREVENTION AND THE USE OF LOW-VOC/HAP COATINGS AT WOOD FURNITURE MANUFACTURING FACILITIES

EPA Science Inventory

The paper discusses a study of pollution prevention and the use of low-VOC/HAP (volatile organic compound/hazardous air pollutant) coatings at wood furniture manufacturing facilities. The study is to identify wood furniture and cabinet manufacturing facilities that have converted...

40 CFR 62.7851 - Identification of sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Mexico... Albuquerque/Bernalillo County Air Quality Control Board. [47 FR 10005, Mar. 9, 1982, as amended at 70 FR 57764...

40 CFR 62.7851 - Identification of sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS New Mexico... Albuquerque/Bernalillo County Air Quality Control Board. [47 FR 10005, Mar. 9, 1982, as amended at 70 FR 57764...

Environmental Control for Regional Library Facilities. RR-80-3.

ERIC Educational Resources Information Center

King, Richard G., Jr.

This report presents an overview of the damage to library materials caused by uncontrollable environmental variables. The control of atmospheric pollutants, temperature, and humidity are discussed with regard to damage, standards, and the costs of deterioration due to these factors. Twelve references are listed. (FM)

78 FR 721 - California State Nonroad Engine Pollution Control Standards; Transport Refrigeration Units...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

...; Transport Refrigeration Units; Request for Authorization; Opportunity for Public Hearing and Comment AGENCY... Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities Where TRUs...''), regarding its ``Airborne Toxic Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU...

Environmental Compliance Assessment System (ECAS) - Japan Settlement

DTIC Science & Technology

1993-12-01

pollution control which take into account the specific natural and social conditions of the concerned area. Prefectural governments are responsible mainly...out possible environmental problems, as well as practices, conditions , and situations that could indicate potential problems. They are intended to...soot and smoke emitting facility, or a person installing a particu- late discharging facility, to report certain matters. These include the conditions

Oil Pollution Act (OPA) and Federal Facilities

EPA Pesticide Factsheets

The Oil Pollution Prevention regulation sets forth requirements for prevention of, preparedness for, and response to oil discharges at specific non-transportation-related facilities, including federal facilities.

Industrial waste water in Bangkok, Thailand: Definitional mission report. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pfrang, W.

A definitional mission visited Thailand between February 1 and 7, 1992 to study the market opportunities for US manufacturers in providing pollution control equipment. Thailand presently lacks industrial machinery required for pollution control equipment. Consequently, this equipment must be imported for both industrial and municipal waste treatment facilities. The US has both the applicable technology and manufactured goods to serve the market. There is, however, stiff competition from Europe and especially Japan, who offer financial assistance at preferential rates for these types of projects.

40 CFR 430.45 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... GUIDELINES AND STANDARDS THE PULP, PAPER, AND PAPERBOARD POINT SOURCE CATEGORY Dissolving Sulfite Subcategory... dissolving sulfite pulp facilities where nitration grade pulp is produced] Pollutant or pollutant property Kg... dissolving sulfite pulp facilities where viscose grade pulp is produced] Pollutant or pollutant property Kg...

40 CFR 408.207 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... control technology. 408.207 Section 408.207 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... degree of effluent reduction attainable by the application of the best conventional pollutant control... processing facility located in population or processing centers including but not limited to Anchorage...

40 CFR 408.207 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology. 408.207 Section 408.207 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... degree of effluent reduction attainable by the application of the best conventional pollutant control... processing facility located in population or processing centers including but not limited to Anchorage...

40 CFR 408.297 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... control technology. 408.297 Section 408.297 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... of effluent reduction attainable by the application of the best conventional pollutant control... facility located in population or processing centers including but not limited to Anchorage, Cordova...

40 CFR 408.207 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... control technology. 408.207 Section 408.207 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... degree of effluent reduction attainable by the application of the best conventional pollutant control... processing facility located in population or processing centers including but not limited to Anchorage...

40 CFR 408.207 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... control technology. 408.207 Section 408.207 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... degree of effluent reduction attainable by the application of the best conventional pollutant control... processing facility located in population or processing centers including but not limited to Anchorage...

40 CFR 408.297 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... control technology. 408.297 Section 408.297 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... of effluent reduction attainable by the application of the best conventional pollutant control... facility located in population or processing centers including but not limited to Anchorage, Cordova...

40 CFR 408.207 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... control technology. 408.207 Section 408.207 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... degree of effluent reduction attainable by the application of the best conventional pollutant control... processing facility located in population or processing centers including but not limited to Anchorage...

40 CFR 408.297 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... control technology. 408.297 Section 408.297 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... of effluent reduction attainable by the application of the best conventional pollutant control... facility located in population or processing centers including but not limited to Anchorage, Cordova...

40 CFR 408.297 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... control technology. 408.297 Section 408.297 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... of effluent reduction attainable by the application of the best conventional pollutant control... facility located in population or processing centers including but not limited to Anchorage, Cordova...

40 CFR 408.297 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology. 408.297 Section 408.297 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... of effluent reduction attainable by the application of the best conventional pollutant control... facility located in population or processing centers including but not limited to Anchorage, Cordova...

30 CFR 784.23 - Operation plan: Maps and plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (b) The following shall be shown for the proposed permit area: (1) Buildings, utility corridors, and... or pollution control; (8) Each facility to be used to protect and enhance fish and wildlife related...

30 CFR 784.23 - Operation plan: Maps and plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (b) The following shall be shown for the proposed permit area: (1) Buildings, utility corridors, and... or pollution control; (8) Each facility to be used to protect and enhance fish and wildlife related...

30 CFR 784.23 - Operation plan: Maps and plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (b) The following shall be shown for the proposed permit area: (1) Buildings, utility corridors, and... or pollution control; (8) Each facility to be used to protect and enhance fish and wildlife related...

A pilot study of indoor air quality in screen golf courses.

PubMed

Goung, Sun-Ju Nam; Yang, Jinho; Kim, Yoon Shin; Lee, Cheol Min

2015-05-01

The aims of this study were to provide basic data for determining policies on air quality for multi-user facilities, including the legal enrollment of the indoor air quality regulation as designated by the Ministry of Environment, and to establish control plans. To this end, concentrations of ten pollutants (PM10, carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), formaldehyde (HCHO), total volatile organic compounds (TVOCs), radon (Rn), oxone (O3), total bacteria counts (TBC), and asbestos) in addition to nicotine, a smoking index material used to determine the impact of smoking on the air quality, were investigated in indoor game rooms and lobbies of 64 screen golf courses. The average concentration of none of the ten pollutants in the game rooms and lobbies of screen golf courses was found to exceed the limit set by the law. There were, however, pollutant concentrations exceeding limits in some screen golf courses, in order to establish a control plan for the indoor air quality of screen golf courses, a study on the emission sources of each pollutant was conducted. The major emission sources were found to be facility users' activities such as smoking and the use of combustion appliances, building materials, and finishing materials.

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

40 CFR 1054.345 - What production-line testing records must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... 1054. We have not changed production processes or quality-control procedures for test engines in a way...) Describe any facility used to test production-line engines and state its location. (2) State the total U.S...

Chemical, biological, and DNA markers for tracing slaughterhouse effluent.

PubMed

Harvey, P J; Taylor, M P; Handley, H K; Foster, S; Gillings, M R; Asher, A J

2017-07-01

Agricultural practices, if not managed correctly, can have a negative impact on receiving environments via waste disposal and discharge. In this study, a chicken slaughter facility on the rural outskirts of Sydney, Australia, has been identified as a possible source of persistent effluent discharge into a peri-urban catchment. Questions surrounding the facility's environmental management practices go back more than four decades. Despite there having never been a definitive determination of the facility's impact on local stream water quality, the New South Wales Environment Protection Authority (NSW EPA) has implemented numerous pollution reduction requirements to manage noise and water pollution at the slaughter facility. However, assessment of compliance remains complicated by potential additional sources of pollution in the catchment. To unravel this long-standing conundrum related to water pollution we apply a forensic, multiple lines of evidence approach to delineate the origin of the likely pollution source(s). Water samples collected between 2014 and 2016 from irrigation pipes and a watercourse exiting the slaughter facility had elevated concentrations of ammonia (max: 63,000µg/L), nitrogen (max: 67,000µg/L) and phosphorus (max: 39,000µg/L), which were significantly higher than samples from adjacent streams that did not receive direct runoff from the facility. Arsenic, sometimes utilised in growth promoting compounds, was detected in water discharging from the facility up to ~4 times (max 3.84µg/L) local background values (<0.5µg/L), with inorganic As (∑V+III) being the dominant species. The spatial association of elevated water pollution to the facility could not unequivocally distinguish a source and consequently DNA analysis of a suspected pollution discharge event was undertaken. Analysis of catchment runoff from several local streams showed that only water sampled at the downstream boundary of the facility tested positive for chicken DNA, with traces of duck DNA being absent, which was a potential confounder given that wild ducks are present in the area. Further, PCR analysis showed that only the discharge water emanating from the slaughter facility tested positive for a generalized marker of anthropogenic pollution, the clinical class 1 integron-integrase gene. The environmental data collected over a three-year period demonstrates that the slaughter facility is indisputably the primary source of water-borne pollution in the catchment. Moreover, application of DNA and PCR for confirming pollution sources demonstrates its potential for application by regulators in fingerprinting pollution sources. Copyright © 2017 Elsevier Inc. All rights reserved.

Stormwater Controls for Pollutant Removal on GDOT Right-Of-Way

DOT National Transportation Integrated Search

2012-04-11

The Georgia Department of Transportation (GDOT) operates a large number of roadside stormwater treatment facilities to contain and treat roadside stormwater runoff. The stormwater best management practices (BMPs) were designed with an emphasis on the...

Rubbertown Next Generation Emission Measurement Demonstration Project Provides Innovative Approaches to Protecting Air Quality

EPA Pesticide Factsheets

EPA and the Louisville Metro Air Pollution Control District (LMAPCD) are working together on a research project to demonstrate NGEM approaches near facilities in the Rubbertown industrial area of Louisville, KY.

40 CFR 60.751 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

...; organic chemicals; plastics and resins manufacturing; pulp and paper industry; rubber and miscellaneous plastic products; stone, glass, clay, and concrete products; textile manufacturing; transportation..., water supply treatment plant, or air pollution control facility, exclusive of the treated effluent from...

75 FR 29584 - Notice of Lodging of Consent Decree Under the Resource Conservation and Recovery Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-26

...(a); and applicable Arkansas Pollution Control and Ecology Commission regulations in connection with Rineco's fuel blending facility located in Benton, Arkansas. The Consent Decree requires Rineco to apply...

Laboratory evaluation of electrostatic spray wet scrubber to control particulate matter emissions from poultry facilities

USDA-ARS?s Scientific Manuscript database

Particulate matter (PM) is a major air pollutant emitted from animal production and has significant impacts on health and the environment. Abatement of PM emissions is imperative and effective PM control technologies are strongly needed. In this work, an electrostatic spray wet scrubber (ESWS) techn...

Tools for Schools: Filtration for Improved Air Quality. Technical Services Bulletin.

ERIC Educational Resources Information Center

2001

This product bulletin addresses air pollution control in educational facilities to enhance educational performance, provides air quality recommendations for schools, and examines the filtration needs of various school areas. The types of air particles typically present are highlighted, and the use of proper filtration to control gases and vapors…

40 CFR 62.14565 - How do I comply with the increment of progress for achieving final compliance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Compliance Schedule and... complete retrofit construction of control devices, as specified in the final control plan, so that, when...

Strategies for emission reduction of air pollutants produced from a chemical plant.

PubMed

Lee, Byeong-Kyu; Cho, Sung-Woong

2003-01-01

Various air pollution control (APC) techniques were employed in order to reduce emissions of air pollutants produced from chemical plants, which have many different chemical production facilities. For an emission reduction of acid gases, this study employed a method to improve solubility of pollutants by decreasing the operating temperature of the scrubbers, increasing the surface area for effective contact of gas and liquid, and modifying processes in the acid scrubbers. To reduce emission of both amines and acid gases, pollutant gas components were first separated, then condensation and/or acid scrubbing, depending on the chemical and physical properties of pollutant components, were used. To reduce emission of solvents, condensation and activated carbon adsorption were employed. To reduce emission of a mixture gases containing acid gases and solvents, the mixed gases were passed into the first condenser, the acid scrubber, the second condenser, and the activated carbon adsorption tower in sequence. As a strategy to reduce emission of pollutants at the source, this study also employed the simple pollution prevention concept of modification of the previously operating APC control device. Finally, air emissions of pollutants produced from the chemical plants were much more reduced by applying proper APC methods, depending upon the types (physical or chemical properties) and the specific emission situations of pollutants.

Compliance Options Diagrams for the Paper and Other Web Coating National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

This January 2004 document contains 14 diagrams illustrating the different compliance options available for those facilities that fall under the Paper and Web Coating Maximum Achievable control Technology (MACT).

48 CFR 23.000 - Scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ENVIRONMENT, ENERGY AND WATER EFFICIENCY, RENEWABLE ENERGY TECHNOLOGIES, OCCUPATIONAL SAFETY, AND DRUG-FREE..., and encouraging the safe operation of vehicles by— (a) Controlling pollution; (b) Managing energy and water use in Government facilities efficiently; (c) Using renewable energy and renewable energy...

CAPSULE REPORT: HARD CHROME FUME SUPPRESSANTS & CONTROL TECHNOLOGIES

EPA Science Inventory

All existing information which includes the information extrapolated from the Hard Chrome Pollution Prevention Demonstration Project(s) and other sources derived from plating facilities and industry contacts, will be condensed and featured in this document. At least five chromium...

FRAMEWORK DESIGN FOR BMP PLACEMENT IN URBAN WATERSHEDS

EPA Science Inventory

A number of stormwater control strategies, commonly known as best management practices (BMPs), are used to mitigate runoff volumes and associated nonpoint source pollution due to wet-weather flows (WWFs). BMP types include ponds, bioretention facilities, infiltration trenches, g...

FRAMEWORK FOR PLACEMENT OF BMPS IN URBAN WATERSHEDS

EPA Science Inventory

A number of stormwater control strategies, commonly known as best management practices (BMPs), are used to mitigate runoff volumes and associated nonpoint source pollution due to wet-weather flows (WWFs). BMP types include ponds, bioretention facilities, infiltration trenches, g...

Deaths and Medical Visits Attributable to Environmental Pollution in the United Arab Emirates

PubMed Central

MacDonald Gibson, Jacqueline; Thomsen, Jens; Launay, Frederic; Harder, Elizabeth; DeFelice, Nicholas

2013-01-01

Background This study estimates the potential health gains achievable in the United Arab Emirates (UAE) with improved controls on environmental pollution. The UAE is an emerging economy in which population health risks have shifted rapidly from infectious diseases to chronic conditions observed in developed nations. The UAE government commissioned this work as part of an environmental health strategic planning project intended to address this shift in the nature of the country’s disease burden. Methods and Findings We assessed the burden of disease attributable to six environmental exposure routes outdoor air, indoor air, drinking water, coastal water, occupational environments, and climate change. For every exposure route, we integrated UAE environmental monitoring and public health data in a spatially resolved Monte Carlo simulation model to estimate the annual disease burden attributable to selected pollutants. The assessment included the entire UAE population (4.5 million for the year of analysis). The study found that outdoor air pollution was the leading contributor to mortality, with 651 attributable deaths (95% confidence interval [CI] 143–1,440), or 7.3% of all deaths. Indoor air pollution and occupational exposures were the second and third leading contributors to mortality, with 153 (95% CI 85–216) and 46 attributable deaths (95% CI 26–72), respectively. The leading contributor to health-care facility visits was drinking water pollution, to which 46,600 (95% CI 15,300–61,400) health-care facility visits were attributed (about 15% of the visits for all the diseases considered in this study). Major study limitations included (1) a lack of information needed to translate health-care facility visits to quality-adjusted-life-year estimates and (2) insufficient spatial coverage of environmental data. Conclusions Based on international comparisons, the UAE’s environmental disease burden is low for all factors except outdoor air pollution. From a public health perspective, reducing pollutant emissions to outdoor air should be a high priority for the UAE’s environmental agencies. PMID:23469200

Deaths and medical visits attributable to environmental pollution in the United Arab Emirates.

PubMed

MacDonald Gibson, Jacqueline; Thomsen, Jens; Launay, Frederic; Harder, Elizabeth; DeFelice, Nicholas

2013-01-01

This study estimates the potential health gains achievable in the United Arab Emirates (UAE) with improved controls on environmental pollution. The UAE is an emerging economy in which population health risks have shifted rapidly from infectious diseases to chronic conditions observed in developed nations. The UAE government commissioned this work as part of an environmental health strategic planning project intended to address this shift in the nature of the country's disease burden. We assessed the burden of disease attributable to six environmental exposure routes outdoor air, indoor air, drinking water, coastal water, occupational environments, and climate change. For every exposure route, we integrated UAE environmental monitoring and public health data in a spatially resolved Monte Carlo simulation model to estimate the annual disease burden attributable to selected pollutants. The assessment included the entire UAE population (4.5 million for the year of analysis). The study found that outdoor air pollution was the leading contributor to mortality, with 651 attributable deaths (95% confidence interval [CI] 143-1,440), or 7.3% of all deaths. Indoor air pollution and occupational exposures were the second and third leading contributors to mortality, with 153 (95% CI 85-216) and 46 attributable deaths (95% CI 26-72), respectively. The leading contributor to health-care facility visits was drinking water pollution, to which 46,600 (95% CI 15,300-61,400) health-care facility visits were attributed (about 15% of the visits for all the diseases considered in this study). Major study limitations included (1) a lack of information needed to translate health-care facility visits to quality-adjusted-life-year estimates and (2) insufficient spatial coverage of environmental data. Based on international comparisons, the UAE's environmental disease burden is low for all factors except outdoor air pollution. From a public health perspective, reducing pollutant emissions to outdoor air should be a high priority for the UAE's environmental agencies.

The Sea-Floor Mapping Facility at the U.S. Geological Survey Woods Hole Field Center, Woods Hole, Massachusetts

USGS Publications Warehouse

Deusser, Rebecca E.; Schwab, William C.; Denny, Jane F.

2002-01-01

Researchers of the sea-floor mapping facility at the U.S. Geological Survey (USGS) Woods Hole Field Center in Woods Hole, Mass., use state-of-the-art technology to produce accurate geologic maps of the sea floor. In addition to basic bathymetry and morphology, sea-floor maps may contain information about the distribution of sand resources, patterns of coastal erosion, pathways of pollutant transport, and geologic controls on marine biological habitats. The maps may also show areas of human impacts, such as disturbance by bottom fishing and pollution caused by offshore waste disposal. The maps provide a framework for scientific research and provide critical information to decisionmakers who oversee resources in the coastal ocean.

Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes.

PubMed

Nunez, C M; Ramsey, G H; Kong, E J; Bahner, M A; Wright, R S; Clayton, C A; Baskir, J N

1999-03-01

Pollution prevention (P2) options to reduce styrene emissions, such as new materials and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To meet this need, the U.S. Environmental Protection Agency's (EPA) Air Pollution Prevention and Control Division, working in collaboration with Research Triangle Institute, measured styrene emissions for several of these P2 options. In addition, the emission factors calculated from these test results were compared with the existing EPA emission factors for gel coat sprayup and resin applications. Results show that styrene emissions can be reduced by up to 52% by using controlled spraying (i.e., reducing overspray), low-styrene and styrene-suppressed materials, and nonatomizing application equipment. Also, calculated emission factors were 1.6-2.5 times greater than the mid-range EPA emission factors for the corresponding gel coat and resin application. These results indicate that facilities using existing EPA emission factors to estimate emissions in open molding processes are likely to underestimate actual emissions. Facilities should investigate the applicability and feasibility of these P2 options to reduce their styrene emissions.

48 CFR 2823.107 - Compliance responsibilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SOCIOECONOMIC PROGRAMS ENVIRONMENT, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Pollution Control and Clean Air and Water 2823.107 Compliance responsibilities. If a contracting officer becomes aware of noncompliance with clean air, water or other affected media standards in facilities used in...

48 CFR 2823.107 - Compliance responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Programs ENVIRONMENT, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Pollution Control and Clean Air and Water 2823.107 Compliance responsibilities. If a contracting officer becomes aware of noncompliance with clean air, water or other affected media standards in facilities used in performing nonexempt...

Maintenance Workers Top Operators in Salary Survey.

ERIC Educational Resources Information Center

Hadeed, S. J.

1978-01-01

Analyzed are data generated by a salary survey of water pollution control facilities personnel. Although there are some geographical differences, the major contributing factors appear to be level of job skills, plant complexity, personnel availability, and area cost of living. (CS)

40 CFR 62.3625 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Indiana Fluoride.... “Fluoride Emission Limitations for Existing Primary Aluminum Plants.” (b) The plan was officially submitted... Federal NESHAP for controlling fluoride emissions from primary aluminum reduction plants promulgated on...

40 CFR 62.3625 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Indiana Fluoride.... “Fluoride Emission Limitations for Existing Primary Aluminum Plants.” (b) The plan was officially submitted... Federal NESHAP for controlling fluoride emissions from primary aluminum reduction plants promulgated on...

FRAMEWORK FOR PLACEMENT OF BMP/LID IN URBAN WATERSHEDS

EPA Science Inventory

A number of stormwater control strategies, commonly known as best management practices (BMPs), are used to mitigate runoff volumes and associated nonpoint source pollution due to wet-weather flows (WWFs). BMP types include ponds, bioretention facilities, infiltration trenches, gr...

FRAMEWORK FOR PLACEMENT OF BMP/LID IN URBAN WATERSHED

EPA Science Inventory

A number of stormwater control strategies, commonly known as best management practices (BMPs), are used to mitigate runoff volumes and associated nonpoint source pollution due to wet-weather flows (WWFs). BMP types include ponds, bioretention facilities, infiltration trenches, g...

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Papers and/or abstracts of 42 papers presented at this waste management seminar are included in this volume. Separate abstracts of 27 papers have been prepared for inclusion in the Energy Data Base (EDB). There are 8 papers represented in the proceedings by abstract only and are not included separately in EDB. The subjects covered in these abstracts include: requirements and compliance for the issuance of the second round NPDES permit for the Portsmouth Plant; performance of the pollution abatement facilities at the Portsmouth Plant; the impact of the Kentucky hazardous waste regulations on the Paducah Plant; control of R-114 lossesmore » at the gaseous diffusion plants; innovative alternatives to pollution control projects; evaluating the fate and potential radiological impacts of Technetium-99 released to the environment; and technical support interfacing for the FY-1981 line item project control of water pollution and solid wastes at the Paducah Plant. There are 15 other papers which were previously input to the EDB. (RJC)« less

Odor composition analysis and odor indicator selection during sewage sludge composting

PubMed Central

Zhu, Yan-li; Zheng, Guo-di; Gao, Ding; Chen, Tong-bin; Wu, Fang-kun; Niu, Ming-jie; Zou, Ke-hua

2016-01-01

ABSTRACT On the basis of total temperature increase, normal dehydration, and maturity, the odor compositions of surface and internal piles in a well-run sewage sludge compost plant were analyzed using gas chromatography–mass spectrometry with a liquid nitrogen cooling system and a portable odor detector. Approximately 80 types of substances were detected, including 2 volatile inorganic compounds, 4 sulfur organic compounds, 16 benzenes, 27 alkanes, 15 alkenes, and 19 halogenated compounds. Most pollutants were mainly produced in the mesophilic and pre-thermophilic periods. The sulfur volatile organic compounds contributed significantly to odor and should be controlled primarily. Treatment strategies should be based on the properties of sulfur organic compounds. Hydrogen sulfide, methyl mercaptan, dimethyl disulfide, dimethyl sulfide, ammonia, and carbon disulfide were selected as core indicators. Ammonia, hydrogen sulfide, carbon disulfide, dimethyl disulfide, methyl mercaptan, dimethylbenzene, phenylpropane, and isopentane were designated as concentration indicators. Benzene, m-xylene, p-xylene, dimethylbenzene, dichloromethane, toluene, chlorobenzene, trichloromethane, carbon tetrachloride, and ethylbenzene were selected as health indicators. According to the principle of odor pollution indicator selection, dimethyl disulfide was selected as an odor pollution indicator of sewage sludge composting. Monitoring dimethyl disulfide provides a highly scientific method for modeling and evaluating odor pollution from sewage sludge composting facilities. Implications: Composting is one of the most important methods for sewage sludge treatment and improving the low organic matter content of many agricultural soils. However, odors are inevitably produced during the composting process. Understanding the production and emission patterns of odors is important for odor control and treatment. Core indicators, concentration indicators, and health indicators provide an index system to odor evaluation. An odor pollution indicator provides theoretical support for further modelling and evaluating odor pollution from sewage sludge composting facilities. PMID:27192607

Odor composition analysis and odor indicator selection during sewage sludge composting.

PubMed

Zhu, Yan-Li; Zheng, Guo-di; Gao, Ding; Chen, Tong-Bin; Wu, Fang-Kun; Niu, Ming-Jie; Zou, Ke-Hua

2016-09-01

On the basis of total temperature increase, normal dehydration, and maturity, the odor compositions of surface and internal piles in a well-run sewage sludge compost plant were analyzed using gas chromatography-mass spectrometry with a liquid nitrogen cooling system and a portable odor detector. Approximately 80 types of substances were detected, including 2 volatile inorganic compounds, 4 sulfur organic compounds, 16 benzenes, 27 alkanes, 15 alkenes, and 19 halogenated compounds. Most pollutants were mainly produced in the mesophilic and pre-thermophilic periods. The sulfur volatile organic compounds contributed significantly to odor and should be controlled primarily. Treatment strategies should be based on the properties of sulfur organic compounds. Hydrogen sulfide, methyl mercaptan, dimethyl disulfide, dimethyl sulfide, ammonia, and carbon disulfide were selected as core indicators. Ammonia, hydrogen sulfide, carbon disulfide, dimethyl disulfide, methyl mercaptan, dimethylbenzene, phenylpropane, and isopentane were designated as concentration indicators. Benzene, m-xylene, p-xylene, dimethylbenzene, dichloromethane, toluene, chlorobenzene, trichloromethane, carbon tetrachloride, and ethylbenzene were selected as health indicators. According to the principle of odor pollution indicator selection, dimethyl disulfide was selected as an odor pollution indicator of sewage sludge composting. Monitoring dimethyl disulfide provides a highly scientific method for modeling and evaluating odor pollution from sewage sludge composting facilities. Composting is one of the most important methods for sewage sludge treatment and improving the low organic matter content of many agricultural soils. However, odors are inevitably produced during the composting process. Understanding the production and emission patterns of odors is important for odor control and treatment. Core indicators, concentration indicators, and health indicators provide an index system to odor evaluation. An odor pollution indicator provides theoretical support for further modelling and evaluating odor pollution from sewage sludge composting facilities.

40 CFR 62.3330 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Illinois Landfill Gas Emissions from Existing Municipal Solid Waste Landfills § 62.3330 Identification of plan. The Illinois Plan for implementing the Federal Municipal Solid Waste Landfill Emission Guidelines to control air...

40 CFR 61.183 - Emission monitoring.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions From Arsenic Trioxide and Metallic Arsenic Production Facilities § 61.183 Emission monitoring. (a... arsenic trioxide and metallic arsenic process emission stream that exits from a control device. (b) The...

9 CFR 3.101 - Facilities, general.

Code of Federal Regulations, 2010 CFR

2010-01-01

... located to prevent food contamination. Food, supplements, and medications may not be used beyond commonly... with all applicable Federal, State, and local pollution control laws. (d) Storage. Supplies of food... (harmful microbial growth), and vermin or other contamination. Refrigerators and freezers (or chilled and...

PROCESS DESIGN MANUAL FOR SLUDGE TREATMENT AND DISPOSAL

EPA Science Inventory

The purpose of this manual is to provide the engineering community and related industry with a new source of information to be used in the planning, design, and operation of present and future wastewater pollution control facilities. This manual supplements this existing knowledg...

40 CFR 61.183 - Emission monitoring.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions From Arsenic Trioxide and Metallic Arsenic Production Facilities § 61.183 Emission monitoring. (a... arsenic trioxide and metallic arsenic process emission stream that exits from a control device. (b) The...

ASSESSMENT OF BIOFILTER MEDIA PARTICLE SIZES FOR REMOVING AMMONIA

USDA-ARS?s Scientific Manuscript database

With increased concerns over odor and gas emissions from livestock production facilities more efficient technologies of air pollution control are needed to mitigate the deleterious effects of air contaminants. Gas-phase biofilters for treating contaminant gases from poultry and livestock operations ...

Assessment of Biofilter Media Particle Sizes for Removing Ammonia

USDA-ARS?s Scientific Manuscript database

With increased concerns over odor and gas emissions from livestock production facilities more efficient technologies of air pollution control are needed to mitigate the deleterious effects of air contaminants. Gas-phase biofilters for treating contaminant gases from poultry and livestock operations ...

Facility Pollution Prevention Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The U.S. Environmental Protection Agency (U.S. EPA) has developed the Facility Pollution Prevention Guide for those who are interested in and responsible for pollution prevention in industrial or service facilities. It summarizes the benefits of a company-wide pollution prevention program and suggests ways to incorporate pollution prevention in company policies and practices. The Guide describes how to establish a company-wide pollution prevention program. It outlines procedures for conducting a preliminary assessment to identify opportunities for waste reduction or elimination. Then, it describes how to use the results of the preassessment to prioritize areas for detailed assessment, how to use themore » detailed assessment to develop pollution prevention options, and how to implement those options that withstand feasibility analysis. Methods of evaluating, adjusting, and maintaining the program are described. Later chapters deal with cost analysis for pollution prevention projects and with the roles of product design and energy conservation in pollution prevention. Appendices consist of materials that will support the pollution prevention effort: assessment worksheets, sources of additional information, examples of evaluative methods, and a glossary.« less

Korea's transition to the IPCC : Introduction of BAT-based Integrated ACT

NASA Astrophysics Data System (ADS)

Lee, Daegyun; Yoo, Heungmin; Kim, Younglan

2017-04-01

Recently, environmental pollution concerns have been increased in Korea more than ever before. So, The Ministry of Environment and the National Institute of Environmental Research(NIER) in Korea has forged a policy that can effectively reduce the environmental pollutants emitted from each business sectors. This policy nicknamed the "Integrated Environmental Management Act" will be implemented from January 2017. It is to consolidate the management method of each environment media (such as water/atmosphere, etc.) and discharge facility into single authorization and/or permission system for entire installation. In particular, it is the environmental management system in according to the "Act on Integrated Management of Environmental Pollution Facilities" that encourages active participation of companies, grant customized emission permits by considering the ambient environmental condition as well as best available techniques, and review the permitted items periodically. Throughout this optimal management policy, we expect the minimization of the environmental effect by reducing the production and emission of pollutants. The integrated environmental management system is a scientific and advanced whole new management system and it is also a policy that considers the environment and human health effect in a synthetically, and minimizes the emission of pollutants by applying the best available techniques. In this presentation, we will talk about the Korea's transition stage to IPCC(integrated pollution prevention and control) and introduce the whole new Integrated Environmental Management system of Korea.

CAPSULE REPORT: HARD CHROME FUME ...

EPA Pesticide Factsheets

All existing information which includes the information extrapolated from the Hard Chrome Pollution Prevention Demonstration Project(s) and other sources derived from plating facilities and industry contacts, will be condensed and featured in this document. At least five chromium emission prevention/control devices have been tested covering a wide spectrum of techniques currently in use at small and large-sized chrome metal plating shops. The goal for limiting chromium emissions to levels specified in the MACT Standards are: (1) 0.030 milligrams per dry standard cubic meter of air (mg/dscm) for small facilities with existing tanks, (2) 0.015 mg/dscm for small facilities with new tanks or large facilities with existing or new tanks. It should be emphasized that chemical mist suppressants still have quality issues and work practices that need to be addressed when they are used. Some of the mist suppressants currently in use are: one-, two-, and three-stage mesh pad mist eliminators; composite mesh pad mist eliminators; packed-bed scrubbers and polyballs. This capsule report should, redominantly, emphasize pollution prevention techniques and include, but not be restricted to, the afore-mentioned devices. Information

DEVELOPMENT OF THE U.S. EPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL

EPA Science Inventory

Metal finishing processes are a type of chemical processes and can be modeled using Computer Aided Process Engineering (CAPE). Currently, the U.S. EPA is developing the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), a pollution prevention software tool for the meta...

[Characteristics and loads of key sources of pollutions discharged into Beishi River, Changzhou City].

PubMed

Li, Chun-Ping; Jiang, Jian-Guo; Chen, Ai-Mei; Wu, Jia-Ling; Fan, Xiu-Juan; Ye, Bin

2010-11-01

Choosing the Beishi river, Changzhou City as the study area, the sewage generation, pollutants characteristics and sewage discharge in catchment area of Beishi river were conducted, detailed investigated and monitored. After using pollution coefficients, the yearly loads of all sources of pollutions were calculated to determine the highest sewage. The results showed that: except pH, the high concentration of SS, COD, BOD5, ammonia nitrogen, TN and TP discharged from MSW collecting houses, MSW transfer stations, public toilets and dining in Changzhou city far exceeded the "Integrated Wastewater Discharge Standard" (GB 8978-1996) and "Effluent Discharged into the City Sewer Water Quality Standards" (CJ 3082-1999). Among which: the highest concentration of COD discharged from MSW transfer stations was up to 51 700 mg/L, while the ammonia nitrogen and TN were as high as 1 616 mg/L and 2 044 mg/L in the toilet wastewater. In addition to this, the ratio of wastewater discharged directly into the river through storm water pipe network was higher from MSW houses, MSW transfer stations, public toilets, dining and other waste in Changzhou city. The 125.2 t/a of COD and 40.53 t/a of BOD5 were the two highest concentrations of various sources of pollution. The highest annual polluting loads discharged into Beishi river is dining, followed by the sanitation facilities. Therefore, cutting pollution control of food and sanitation facilities along the river is particularly urgent.

{open_quotes}In close proximity{close_quotes} to E&P waste management facilities: Lessons of three communities in the Four Corners Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shuey, C.

1994-12-31

Contaminant releases from E&P waste management facilities located near residences in three communities in the Four Corners Area -- two in New Mexico and one in Utah -- spurred vocal concern among local residents in recent years. Noxious odors, including hydrogen sulfide, were present in all cases and releases of production wastes and oil spills were prevalent in two of the cases. In all three, residents said they felt powerless to change operator or agency decisions about siting of facilities close to places where people congregate. These cases illustrate the need for regulators to consider facility locations in permitting decisions.more » They also demonstrate the need for creation of statutorily recognized buffer zones around new oil and gas production and processing facilities where releases of pollutants to the air, land and water can reasonably be expected, regardless of the level of pollution control. Buffer zones may be especially important in states where local governments have not elected to adopt land use and zoning requirements that affect the siting of E&P facilities. Agency and corporate sensitivity to siting concerns will engender public confidence in permitting decisions and avoid the needless waste of public and private resources.« less

40 CFR 62.3120 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Idaho Control of Non... of plan. (a) The Idaho Division of Environmental Quality submitted to the Environmental Protection..., 1999. (b) Identification of Sources: The Idaho State Plan applies to all existing Municipal Solid Waste...

Iodine-131 in sewage sludge from a small water pollution control plant serving a thyroid cancer treatment facility.

PubMed

Rose, Paula S; Swanson, R Lawrence

2013-08-01

Iodine-131 (half-life = 8.04 d) is the most widely used radionuclide in medicine for therapeutic purposes. It is excreted by patients and is discharged directly to sewer systems. Despite considerable dilution in waste water and the relatively short half-life of I, it is readily measured in sewage. This work presents I concentrations in sewage sludge from three water pollution control plants (WPCPs) on Long Island, NY. Iodine-131 concentrations ranged from 0.027 ± 0.002 to 148 ± 4 Bq g dry weight. The highest concentrations were measured in the Stony Brook WPCP, a relatively small plant (average flow = 6.8 × 10 L d) serving a regional thyroid cancer treatment facility in Stony Brook, NY. Preliminary radiation dose calculations suggested further evaluation of dose to treatment plant workers in the Stony Brook WPCP based on the recommendations of the Interagency Steering Committee on Radiation Standards.

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT: GENERAL MAIL AND VEHICLE MAINTENANCE FACILITY, UNITED STATES POSTAL SERVICE, BUFFALO, NY

EPA Science Inventory

The Pollution Prevention Opportunity Assessment (PPOA) summarized here was conducted at a U.S.Postal Service (USPS) Facility in Buffalo, NY. The PPOA documented and quantified waste generation at the General Mail Facility (GMF) where mail is processed, and at the Vehicle Maintena...

CASE STUDY PROJECT: THE USE OF LOW-VOC/HAP COATINGS AT WOOD FURNITURE MANUFACTURING FACILITIES

EPA Science Inventory

The paper discusses a study of pollution prevention and the use of low-VOC/HAP (volatile organic compound/hazardous air pollutant) coatings at wood furniture manufacturing facilities. The study is to identify wood furniture and cabinet manufacturing facilities that have converted...

Comparative advantage strategy for rapid pollution mitigation in China.

PubMed

Xu, Yuan

2013-09-03

Due to its sheer size and growth trend, no other country is facing more daunting challenges than China in reducing its pollutant emissions. A critical but inadequately addressed question is how rapidly China could feasibly achieve such mitigation. The stake is high not only about how much worse China's environmental quality could become but also about how the world can prevent catastrophic climate change. Through examining sulfur dioxide (SO2) mitigation in coal-fired power plants and wind energy development for carbon dioxide (CO2) mitigation, this article proposes a comparative advantage strategy for overcoming high barriers to fast pollution mitigation. On the demand side, China could first make progress in the deployment of more pollution control facilities and then improve their operational performance. The resulting low technological market entry barriers could help to build enough industrial capacity to meet the huge demand with prices under control. The strategy in the current practice could be improved to establish not only a large supply industry but also a strong one to enable other countries to move more rapidly in pollution mitigation.

Environmental risk analysis of oil handling facilities in port areas. Application to Tarragona harbor (NE Spain).

PubMed

Valdor, Paloma F; Gómez, Aina G; Puente, Araceli

2015-01-15

Diffuse pollution from oil spills is a widespread problem in port areas (as a result of fuel supply, navigation and loading/unloading activities). This article presents a method to assess the environmental risk of oil handling facilities in port areas. The method is based on (i) identification of environmental hazards, (ii) characterization of meteorological and oceanographic conditions, (iii) characterization of environmental risk scenarios, and (iv) assessment of environmental risk. The procedure has been tested by application to the Tarragona harbor. The results show that the method is capable of representing (i) specific local pollution cases (i.e., discriminating between products and quantities released by a discharge source), (ii) oceanographic and meteorological conditions (selecting a representative subset data), and (iii) potentially affected areas in probabilistic terms. Accordingly, it can inform the design of monitoring plans to study and control the environmental impact of these facilities, as well as the design of contingency plans. Copyright © 2014 Elsevier Ltd. All rights reserved.

40 CFR 62.6362 - Identification of plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Missouri Mercury...) Identification of plan. Section 111(d) plan and associated State regulation 10 CSR 10-6.368, Control of Mercury..., 2007. (b) Identification of sources. The plan applies to all new and existing mercury budget units...

40 CFR 62.6362 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Missouri Mercury...) Identification of plan. Section 111(d) plan and associated State regulation 10 CSR 10-6.368, Control of Mercury..., 2007. (b) Identification of sources. The plan applies to all new and existing mercury budget units...

40 CFR 62.6362 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Missouri Mercury...) Identification of plan. Section 111(d) plan and associated State regulation 10 CSR 10-6.368, Control of Mercury..., 2007. (b) Identification of sources. The plan applies to all new and existing mercury budget units...

40 CFR 62.6362 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Missouri Mercury...) Identification of plan. Section 111(d) plan and associated State regulation 10 CSR 10-6.368, Control of Mercury..., 2007. (b) Identification of sources. The plan applies to all new and existing mercury budget units...

40 CFR 62.6362 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Missouri Mercury...) Identification of plan. Section 111(d) plan and associated State regulation 10 CSR 10-6.368, Control of Mercury..., 2007. (b) Identification of sources. The plan applies to all new and existing mercury budget units...

40 CFR 62.4623 - Legal authority.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Legal authority. 62.4623 Section 62... Control of Designated Pollutants from Existing Facilities (section 111(d) Plan) § 62.4623 Legal authority... adequate legal authority for the State to make emission data, as correlated with applicable emissions...

40 CFR 62.4623 - Legal authority.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Legal authority. 62.4623 Section 62... Control of Designated Pollutants from Existing Facilities (section 111(d) Plan) § 62.4623 Legal authority... adequate legal authority for the State to make emission data, as correlated with applicable emissions...

40 CFR 62.4623 - Legal authority.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Legal authority. 62.4623 Section 62... Control of Designated Pollutants from Existing Facilities (section 111(d) Plan) § 62.4623 Legal authority... adequate legal authority for the State to make emission data, as correlated with applicable emissions...

40 CFR 62.4623 - Legal authority.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Legal authority. 62.4623 Section 62... Control of Designated Pollutants from Existing Facilities (section 111(d) Plan) § 62.4623 Legal authority... adequate legal authority for the State to make emission data, as correlated with applicable emissions...

40 CFR 62.4623 - Legal authority.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Legal authority. 62.4623 Section 62... Control of Designated Pollutants from Existing Facilities (section 111(d) Plan) § 62.4623 Legal authority... adequate legal authority for the State to make emission data, as correlated with applicable emissions...

40 CFR 63.5335 - How do I determine the actual HAP loss?

Code of Federal Regulations, 2010 CFR

2010-07-01

... operation type. (2) Chemical Inventory Mass Balance. Determine the actual monthly HAP loss from your... operation. (2) For facilities using add-on emission control devices, the finish inventory log and the... National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations Compliance...

40 CFR 429.162 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 429.162 Section 429.162 Protection of Environment ENVIRONMENTAL PROTECTION... Wood Furniture and Fixture Production Without Water Wash Spray Booth(s) or Without Laundry Facilities... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 429.172 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 429.172 Section 429.172 Protection of Environment ENVIRONMENTAL PROTECTION... Wood Furniture and Fixture Production With Water Wash Spray Booth(s) or With Laundry Facilities... application of the best conventional pollutant control technology (BCT). [Reserved] ...

OFF-GAS ANALYSIS RESULTS AND FINE PORE RETROFIT CASE HISTORY FOR HARTFORD, CONNECTICUT

EPA Science Inventory

In the summer of 1982, the Hartford Metropolitan District Commission, Hartford County, Connecticut, Water Pollution Control Facility underwent a retrofit form a spiral roll coarse bubble to a full floor coverage fine pore aeration system. Work performed included all new in-tank ...

The Highland Park Environmental Health Plan: Evaluation and Recommendations for Improving the Urban Environment.

ERIC Educational Resources Information Center

Michigan State Dept. of Commerce, Lansing. Community Planning Div.

The Highland Park environmental health plan includes the following components: Legal and administrative and programmatic relationships, planning studies, residential environment, disease vector control, water and sewage systems, sanitation, air pollution, food protection, industrial and radiological health, and solid waste facilities. (JR)

40 CFR 60.57c - Monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... pressure or induced air fabric filters, the bag leak detector shall be installed downstream of the fabric... 60.57c Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... owner or operator of an affected facility using an air pollution control device other than a dry...

40 CFR 60.57c - Monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pressure or induced air fabric filters, the bag leak detector shall be installed downstream of the fabric... 60.57c Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... owner or operator of an affected facility using an air pollution control device other than a dry...

Bringing the Polluters Back In: Environmental Inequality and the Organization of Chemical Production

PubMed Central

Grant, Don; Trautner, Mary Nell; Downey, Liam; Thiebaud, Lisa

2011-01-01

Environmental justice scholars have suggested that because chemical plants and other hazardous facilities emit more pollutants where they face the least resistance, disadvantaged communities face a special health risk. In trying to determine whether race or income has the bigger impact on a neighborhood’s exposure to pollution, however, scholars tend to overlook the facilities themselves and the effect of their characteristics on emissions. In particular, how do the characteristics of facilities and their surrounding communities jointly shape pollution outcomes? We propose a new line of environmental justice research that focuses on facilities and how their features combine with communities’ features to create dangerous emissions. Using novel fuzzy-set analysis techniques and the EPA’s newly developed Risk-Screening Environmental Indicators, we test the influence of facility and community factors on chemical plants’ health-threatening emissions. Contrary to the idea that community characteristics have singular, linear effects, findings show that facility and community factors combine in a variety of ways to produce risky emissions. We speculate that as chemical firms experiment with different ways of producing goods and externalizing pollution costs, new “recipes of risk” are likely to emerge. The question, then, will no longer be whether race or income matters most, but in which of these recipes do they matter and how. PMID:21921966

Rubbertown NGEM Demonstration Project Planning meetings ...

EPA Pesticide Factsheets

From the shared perspective of industrial facilities, workers, regulators, and communities, cost-effective detection and assessment of significant onset fugitive leaks or process issues, is a mutually beneficial concept. If emissions that require mitigation can be detected and fixed quickly, benefits such as safer working environments, cost saving through reduced product loss, lower air shed pollutant impacts, and improved transparency and community relations can be realized. Under its next generation emission measurement program (NGEM), EPA’s Office of Research and Development (ORD), National Risk Management Research Laboratory (NRMRL) is working collaboratively with industry, instrument /information companies, state and local agencies, communities, and academic groups to explore new technical approaches for non-point source detection and migration. Techniques such as mobile and fixed point sensors and passive samplers employed on various spatial scales are being explored. With collaboration of the project team including EPA R4, the Louisville Metro Air Pollution Control District (LMAPCD), industrial facilities, and contractors to the EPA, a select subset of these NGEM approaches will be demonstrated in this project as per the quality assurance project plan. From April 17-20, 2017, E. Thoma will travel to Louisville KY to work with the Louisville Metro Air Pollution Control District (LMAPCD) and other parties for planning activities related to the

Intake-to-delivered-energy ratios for central station and distributed electricity generation in California

NASA Astrophysics Data System (ADS)

Heath, Garvin A.; Nazaroff, William W.

In previous work, we showed that the intake fraction (iF) for nonreactive primary air pollutants was 20 times higher in central tendency for small-scale, urban-sited distributed electricity generation (DG) sources than for large-scale, central station (CS) power plants in California [Heath, G.A., Granvold, P.W., Hoats, A.S., Nazaroff, W.W., 2006. Intake fraction assessment of the air pollutant exposure implications of a shift toward distributed electricity generation. Atmospheric Environment 40, 7164-7177]. The present paper builds on that study, exploring pollutant- and technology-specific aspects of population inhalation exposure from electricity generation. We compare California's existing CS-based system to one that is more reliant on DG units sited in urban areas. We use Gaussian plume modeling and a GIS-based exposure analysis to assess 25 existing CSs and 11 DG sources hypothetically located in the downtowns of California's most populous cities. We consider population intake of three pollutants—PM 2.5, NO x and formaldehyde—directly emitted by five DG technologies—natural gas (NG)-fired turbines, NG internal combustion engines (ICE), NG microturbines, diesel ICEs, and fuel cells with on-site NG reformers. We also consider intake of these pollutants from existing CS facilities, most of which use large NG turbines, as well as from hypothetical facilities located at these same sites but meeting California's best-available control technology standards. After systematically exploring the sensitivity of iF to pollutant decay rate, the iFs for each of the three pollutants for all DG and CS cases are estimated. To efficiently compare the pollutant- and technology-specific exposure potential on an appropriate common basis, a new metric is introduced and evaluated: the intake-to-delivered-energy ratio (IDER). The IDER expresses the mass of pollutant inhaled by an exposed population owing to emissions from an electricity generation unit per quantity of electric energy delivered to the place of use. We find that the central tendency of IDER is much greater for almost every DG technology evaluated than for existing CS facilities in California.

Development and investigation of a pollution control pit for treatment of stormwater from metal roofs and traffic areas.

PubMed

Dierkes, C; Göbel, P; Lohmann, M; Coldewey, W G

2006-01-01

Source control by on-site retention and infiltration of stormwater is a sustainable and proven alternative to classical drainage methods. Unfortunately, sedimentary particles and pollutants from drained surfaces cause clogging and endanger soil and groundwater during long-term operation of infiltration devices. German water authorities recommend the use of infiltration devices, such as swales or swale-trench-systems. Direct infiltration by underground facilities, such as pipes, trenches or sinks, without pretreatment of runoff is generally not permitted. Problems occur with runoff from metal roofs, traffic areas and industrial sites. However, due to site limitations, underground systems are often the only feasible option. To overcome this situation, a pollution control pit was developed with a hydrodynamic separator and a multistage filter made of coated porous concrete. The system treats runoff at source and protects soil, groundwater and receiving waterways. Typically, more than 90% of the pollutants such as sedimentary particles, hydrocarbons and heavy metals can be removed. Filters have been developed to treat even higher polluted stormwater loads from metal roofs and industrial sites. The treatment process is based on sedimentation, filtration, adsorption and chemical precipitation. Sediments are trapped in a special chamber within the pit and can be removed easily. Other pollutants are captured in the concrete filter upstream of the sediment separator chamber. Filters can be easily replaced.

40 CFR 63.11115 - What are my general duties to minimize emissions?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Dispensing Facilities Emission Limitations and Management Practices § 63.11115 What are my general duties to... consistent with safety and good air pollution control practices for minimizing emissions. Determination of... and maintenance procedures, review of operation and maintenance records, and inspection of the source...

40 CFR 63.11115 - What are my general duties to minimize emissions?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Dispensing Facilities Emission Limitations and Management Practices § 63.11115 What are my general duties to... consistent with safety and good air pollution control practices for minimizing emissions. Determination of... and maintenance procedures, review of operation and maintenance records, and inspection of the source...

40 CFR 63.11115 - What are my general duties to minimize emissions?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Dispensing Facilities Emission Limitations and Management Practices § 63.11115 What are my general duties to... consistent with safety and good air pollution control practices for minimizing emissions. Determination of... and maintenance procedures, review of operation and maintenance records, and inspection of the source...

40 CFR 62.14840 - What definitions must I know?

Code of Federal Regulations, 2013 CFR

2013-07-01

... primary chamber. Solid waste means any garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded material, including solid, liquid... vegetative agricultural materials such as nut and grain hulls and chaff (e.g., almond, walnut, peanut, rice...

40 CFR 62.14840 - What definitions must I know?

Code of Federal Regulations, 2012 CFR

2012-07-01

... primary chamber. Solid waste means any garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded material, including solid, liquid... vegetative agricultural materials such as nut and grain hulls and chaff (e.g., almond, walnut, peanut, rice...

40 CFR 62.14840 - What definitions must I know?

Code of Federal Regulations, 2014 CFR

2014-07-01

... primary chamber. Solid waste means any garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded material, including solid, liquid... vegetative agricultural materials such as nut and grain hulls and chaff (e.g., almond, walnut, peanut, rice...

Settleometer. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Arasmith, E. E.

The settleometer test is used to indicate the solids-liquid separation (downtime) capability of sludge, most commonly on activated sludge entering the secondary clarifier and aerobic digesters. Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module…

Educational Systems for Operators of Water Pollution Control Facilities.

ERIC Educational Resources Information Center

Austin, John H., Ed.; Kesler, John, Ed.

Several of the articles from this conference concern current activities of federal, state, and municipal governments, of universities and community colleges, and of industry in wastewater treatment plant operator training. The rest of the articles deal with instructional technology, explaining different facets of it and showing how it may be…

77 FR 19537 - MARPOL Annex V Special Areas: Wider Caribbean Region

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... through section 2101 of the Marine Plastic Pollution Research and Control Act (Pub. L. 100-220). MARPOL... in increased burdens to vessels or reception facilities. One commenter brought up the problem of dry... the following types: Plastics, including synthetic ropes, fishing nets, and plastic bags; Dunnage (i.e...

Odor and odorous chemical emissions from animal buildings: part 1 - project overview, collection methods, and quality control

USDA-ARS?s Scientific Manuscript database

Livestock facilities have historically generated public concerns due to their emissions of odorous air and various chemical pollutants. Odor emission factors and identification of principal odorous chemicals are needed to better understand the problem. Applications of odor emission factors include i...

REAL TIME MONITORING OF PCDD/PCDF FOR TRANSIENT CHARACTERIZATION AND PROCESS CONTROL

EPA Science Inventory

Current sampling methods for PCDD/F emission compliance make use of a sample taken during steady state conditions which is assumed to be representative of facility performance. This is often less than satisfactory. The rapid variation of PCDDs, PCDF, and other co-pollutants due ...

40 CFR 62.14454 - How must I monitor the required parameters?

Code of Federal Regulations, 2014 CFR

2014-07-01

... installed in each baghouse compartment or cell. (7) For negative pressure or induced air FF, the bag leak...) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND... use an air pollution control device that includes a FF and are not demonstrating compliance using PM...

40 CFR 62.14454 - How must I monitor the required parameters?

Code of Federal Regulations, 2013 CFR

2013-07-01

... installed in each baghouse compartment or cell. (7) For negative pressure or induced air FF, the bag leak...) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND... use an air pollution control device that includes a FF and are not demonstrating compliance using PM...

Recent advancements in bioremediation of dye: Current status and challenges.

PubMed

Vikrant, Kumar; Giri, Balendu Shekhar; Raza, Nadeem; Roy, Kangkan; Kim, Ki-Hyun; Rai, Birendra Nath; Singh, Ram Sharan

2018-04-01

The rampant industrialization and unchecked growth of modern textile production facilities coupled with the lack of proper treatment facilities have proliferated the discharge of effluents enriched with toxic, baleful, and carcinogenic pollutants including dyes, heavy metals, volatile organic compounds, odorants, and other hazardous materials. Therefore, the development of cost-effective and efficient control measures against such pollution is imperative to safeguard ecosystems and natural resources. In this regard, recent advances in biotechnology and microbiology have propelled bioremediation as a prospective alternative to traditional treatment methods. This review was organized to address bioremediation as a practical option for the treatment of dyes by evaluating its performance and typical attributes. It further highlights the current hurdles and future prospects for the abatement of dyes via biotechnology-based remediation techniques. Copyright © 2018 Elsevier Ltd. All rights reserved.

40 CFR Table 1 to Subpart Vvvv of... - Compliance Dates for New and Existing Boat Manufacturing Facilities

Code of Federal Regulations, 2011 CFR

2011-07-01

... Boat Manufacturing Facilities 1 Table 1 to Subpart VVVV of Part 63 Protection of Environment... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat... Existing Boat Manufacturing Facilities As specified in § 63.5695, you must comply by the dates in the...

40 CFR Table 1 to Subpart Vvvv of... - Compliance Dates for New and Existing Boat Manufacturing Facilities

Code of Federal Regulations, 2010 CFR

2010-07-01

... Boat Manufacturing Facilities 1 Table 1 to Subpart VVVV of Part 63 Protection of Environment... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat... Existing Boat Manufacturing Facilities As specified in § 63.5695, you must comply by the dates in the...

Grassed swales for stormwater pollution control during rain and snowmelt.

PubMed

Bäckström, M

2003-01-01

The retention of suspended solids, particles and heavy metals in different grassed swales during rain events and snowmelt is discussed. The experimental results derived from investigations performed in existing grassed swales in the Luleå region, Northern Sweden. During high pollutant loading rates, grassed swales retain significant amounts of pollutants, mainly due to sedimentation of particulate matter. Low to moderate removal efficiencies could be expected for heavy metals, especially metals in solution (i.e. the dissolved phase). When grassed swales receive urban runoff with low pollutant concentrations, they may release rather than retain pollutants. Swales are important snow deposit areas in the city and particle bound pollutants do to a large extent remain in the swale after snowmelt. However, dissolved pollutants (i.e. dissolved heavy metals) are likely to escape the swale with the melt water. Grassed swales may be regarded as facilities that even out the peaks in pollutant loads without being capable of producing consistent high removal rates. This suggests that swales should be considered as primary treatment devices. Possible design parameters for grassed swales are mean hydraulic detention time, surface loading rate or specific swale area.

EPA Facility Registry Service (FRS): CAMDBS

EPA Pesticide Factsheets

This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link to the Clean Air Markets Division Business System (CAMDBS). Administered by the EPA Clean Air Markets Division, within the Office of Air and Radiation, CAMDBS supports the implementation of market-based air pollution control programs, including the Acid Rain Program and regional programs designed to reduce the transport of ozone. FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to CAMDBS facilities once the CAMDBS data has been integrated into the FRS database. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs.

TRI Analysis of Community-Scale Pollution Prevention Activities: North Birmingham, Alabama (PDF)

EPA Pesticide Factsheets

This analysis compared TRI data about pollution prevention and waste management activities from facilities located in North Birmingham with facilities in the same industry sectors that are located elsewhere in the country.

Efficiency of a turbidity-based, real-time control strategy applied to a retention tank: a simulation study.

PubMed

Lacour, C; Joannis, C; Schuetze, M; Chebbo, G

2011-01-01

This paper compares several real-time control (RTC) strategies for a generic configuration consisting of a storage tank with two overflow facilities. Two of the strategies only make use of flow rate data, while the third also introduces turbidity data in order to exercise dynamic control between two overflow locations. The efficiency of each strategy is compared over a wide range of system setups, described by two parameters. This assessment is performed by simulating the application of control strategies to actual measurements time series recorded on two sites. Adding turbidity measurements into an RTC strategy leads to a significant reduction in the annual overflow pollutant load. The pollutant spills spared by such a control strategy strongly depend on the site and on the flow rate based strategy considered as a reference. With the datasets used in this study, values ranging from 5 to 50% were obtained.

Preparation for an Airport Master Plan for Joint Use Operation at Scott AFB, Illinois.

DTIC Science & Technology

1987-08-01

Airfield and approach lighting b) Air traffic control tower c) Meteorological facilities d) Airport access and service roads e) Utilities f) Public...use, and to comply with all requirements for control of air, water and noise pollution as well as solid waste disposal. Specific conditions would be...Identification of Persons e Identification of Ground Vehicles S• Fencing 0 Gates I * Security Lighting i * Locks and Key Control 9 Critical Areas (Other Than

Energy technology characterizations handbook: environmental pollution and control factors. Third edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-03-01

This Handbook deals with environmental characterization information for a range of energy-supply systems and provides supplementary information on environmental controls applicable to a select group of environmentally characterized energy systems. Environmental residuals, physical-resource requirements, and discussion of applicable standards are the principal information provided. The quantitative and qualitative data provided are useful for evaluating alternative policy and technical strategies and for assessing the environmental impact of facility siting, energy production, and environmental controls.

DEVELOPMENTS IN THE APPLICATION OF IMPACT ASSESSMENT METHODOLOGIES FOR POLLUTION PREVENTION

EPA Science Inventory

Pollution prevention requires the assessment of various multimedia environmental impacts to ensure that the alternative selected most closely represents the environmental goals and priorities of the facility. While some facility's environmental policies are easy to assess, others...

75 FR 78916 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 62 [EPA-R03-OAR-2010-0859; FRL -9240-2] Approval and...; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator (HMIWI) Units, Negative Declaration and Withdrawal of EPA Plan Approval AGENCY: Environmental Protection Agency (EPA). ACTION: Direct...

Centrifuge. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Arasmith, E. E.

Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module provides waste water treatment plant operators with the basic information needed to: (1) successfully run a centrifuge test; (2) accurately read results obtained in test tubes; and (3) obtain…

40 CFR 60.5415 - How do I demonstrate continuous compliance with the standards for my gas well affected facility...

Code of Federal Regulations, 2014 CFR

2014-07-01

... plants? 60.5415 Section 60.5415 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... used to reduce emissions, you must demonstrate continuous compliance with the performance requirements... sudden, infrequent, and unavoidable failure of air pollution control equipment, process equipment, or a...

75 FR 45572 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... proposing to further delay the compliance date for facilities with milk containers, associated piping and... a January 15, 2009 action that proposed to exempt these containers from the SPCC requirements. The... SPCC requirements for these milk containers, associated piping and appurtenances, or as specified by a...

Turbidity. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Carnegie, John W.

Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module provides waste water treatment plant operators with the basic skills and information needed to: (1) standardize a nephelometric turbidimeter; (2) determine the turbidity of a sample; and (3) calculate…

Percent CO2. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module on digestor gas analysis provides waste water treatment plant operators with the basic skills and information needed to: (1) successfully run the carbon dioxide analysis test; (2) accurately record…

78 FR 63937 - Approval and Promulgation of Implementation Plans; Approval and Promulgation of State Air Quality...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Quality Plans for Designated Facilities and Pollutants, State of Iowa; Control of Emissions From Existing Hospital/ Medical/Infectious Waste Incinerator Units, Negative Declaration and 111(d) Plan Rescission... declaration and withdrawal of its section 111(d)/129 plan for Hospital Medical Infectious Waste Incinerators...

Guidelines to Career Development for Wastewater Treatment Plant Personnel.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Education and Manpower Planning.

The guidelines were written to promote job growth and improvement in the personnel who manage, operate, and maintain wastewater treatment plants. Trained operators and technicians are the key components in any water pollution control facility. The approach is to move from employment to training through specific modules for 21 standard job…

40 CFR 112.10 - Spill Prevention, Control, and Countermeasure Plan requirements for onshore oil drilling and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Marine Mammal Oils; and Vegetable Oils (Including Oils from Seeds, Nuts, Fruits, and Kernels) § 112.10... Countermeasure Plan requirements for onshore oil drilling and workover facilities. 112.10 Section 112.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION...

40 CFR 112.10 - Spill Prevention, Control, and Countermeasure Plan requirements for onshore oil drilling and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Marine Mammal Oils; and Vegetable Oils (Including Oils from Seeds, Nuts, Fruits, and Kernels) § 112.10... Countermeasure Plan requirements for onshore oil drilling and workover facilities. 112.10 Section 112.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION...

40 CFR 62.14575 - What must I do if I close my CISWI unit and then restart it?

Code of Federal Regulations, 2013 CFR

2013-07-01

... FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Compliance Schedule and Increments of... retrofit construction of control devices so that when the affected CISWI unit is brought online, all...

Greenridge Multi-Pollutant Control Project Preliminary Public Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Connell, Daniel P

2009-01-12

The Greenidge Multi-Pollutant Control Project is being conducted as part of the U.S. Department of Energy's Power Plant Improvement Initiative to demonstrate an innovative combination of air pollution control technologies that can cost-effectively reduce emissions of SO{sub 2}, NO{sub x}, Hg, acid gases (SO{sub 3}, HCl, and HF), and particulate matter from smaller coal-fired electrical generating units (EGUs). The multi-pollutant control system includes a hybrid selective non-catalytic reduction (SNCR)/in-duct selective catalytic reduction (SCR) system to reduce NOx emissions by {ge}60%, followed by a Turbosorp{reg_sign} circulating fluidized bed dry scrubber system to reduce emissions of SO{sub 2}, SO{sub 3}, HCl, andmore » HF by {ge}95%. Mercury removal of {ge}90% is also targeted via the co-benefits afforded by the in-duct SCR, dry scrubber, and baghouse and by injection of activated carbon upstream of the scrubber, as required. The technology is particularly well suited, because of its relatively low capital and maintenance costs and small space requirements, to meet the needs of coal-fired units with capacities of 50-300 MWe. There are about 440 such units in the United States that currently are not equipped with SCR, flue gas desulfurization (FGD), or mercury control systems. These smaller units are a valuable part of the nation's energy infrastructure, constituting about 60 GW of installed capacity. However, with the onset of the Clean Air Interstate Rule, Clean Air Mercury Rule, and various state environmental actions requiring deep reductions in emissions of SO{sub 2}, NO{sub x}, and mercury, the continued operation of these units increasingly depends upon the ability to identify viable air pollution control retrofit options for them. The large capital costs and sizable space requirements associated with conventional technologies such as SCR and wet FGD make these technologies unattractive for many smaller units. The Greenidge Project aims to confirm the commercial readiness of an emissions control system that is specifically designed to meet the environmental compliance requirements of these smaller coal-fired EGUs. The multi-pollutant control system is being installed and tested on the AES Greenidge Unit 4 (Boiler 6) by a team including CONSOL Energy Inc. as prime contractor, AES Greenidge LLC as host site owner, and Babcock Power Environmental Inc. as engineering, procurement, and construction contractor. All funding for the project is being provided by the U.S. Department of Energy, through its National Energy Technology Laboratory, and by AES Greenidge. AES Greenidge Unit 4 is a 107 MW{sub e} (net), 1950s vintage, tangentially-fired, reheat unit that is representative of many of the 440 smaller coal-fired units identified above. Following design and construction, the multi-pollutant control system will be demonstrated over an approximately 20-month period while the unit fires 2-4% sulfur eastern U.S. bituminous coal and co-fires up to 10% biomass. This Preliminary Public Design Report is the first in a series of two reports describing the design of the multi-pollutant control facility that is being demonstrated at AES Greenidge. Its purpose is to consolidate for public use all available nonproprietary design information on the Greenidge Multi-Pollutant Control Project. As such, the report includes a discussion of the process concept, design objectives, design considerations, and uncertainties associated with the multi-pollutant control system and also summarizes the design of major process components and balance of plant considerations for the AES Greenidge Unit 4 installation. The Final Public Design Report, the second report in the series, will update this Preliminary Public Design Report to reflect the final, as-built design of the facility and to incorporate data on capital costs and projected operating costs.« less

Control of mercury emissions from stationary coal combustion sources in China: Current status and recommendations.

PubMed

Hu, Yuanan; Cheng, Hefa

2016-11-01

Coal burning in power plants and industrial boilers is the largest combustion source of mercury emissions in China. Together, power plants and industrial boilers emit around 250 tonnes of mercury each year, or around half of atmospheric mercury emissions from anthropogenic sources in the country. Power plants in China are generally equipped with multi-pollutant control technologies, which offer the co-benefit of mercury removal, while mercury-specific control technologies have been installed in some facilities. In contrast, most industrial boilers have only basic or no flue gas cleaning. A combination of measures, including energy conservation, coal switching and blending, reducing the mercury contents of coals through washing, combustion controls, and flue gas cleaning, can be used to reduce mercury emissions from these stationary combustion sources. More stringent emission standards for the major air pollutants from coal-fired power plants and industrial boiler, along with standards for the previously unregulated mercury, were implemented recently, which is expected to bring significant reduction in their mercury emissions through the necessary upgrades of multi-pollutant and mercury-specific control technologies. Meanwhile, strong monitoring capacity and strict enforcement are necessary to ensure that the combustion sources operate in compliance with the new emission standards and achieve significant reduction in the emissions of mercury and other air pollutants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sustainable development of process facilities: state-of-the-art review of pollution prevention frameworks.

PubMed

Hossain, Khandoker A; Khan, Faisal I; Hawboldt, Kelly

2008-01-15

Pollution prevention (P2) strategy is receiving significant attention in industries all over the world, over end-of-pipe pollution control and management strategy. This paper is a review of the existing pollution prevention frameworks. The reviewed frameworks contributed significantly to bring the P2 approach into practice and gradually improved it towards a sustainable solution; nevertheless, some objectives are yet to be achieved. In this context, the paper has proposed a P2 framework 'IP2M' addressing the limitations for systematic implementation of the P2 program in industries at design as well as retrofit stages. The main features of the proposed framework are that, firstly, it has integrated cradle-to-gate life cycle assessment (LCA) tool with other adequate P2 opportunity analysis tools in P2 opportunity analysis phase and secondly, it has re-used the risk-based cradle-to-gate LCA during the environmental evaluation of different P2 options. Furthermore, in multi-objective optimization phase, it simultaneously considers the P2 options with available end-of-pipe control options in order to select the sustainable environmental management option.

33 CFR 146.45 - Pollution incidents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Pollution incidents. 146.45...) OUTER CONTINENTAL SHELF ACTIVITIES OPERATIONS OCS Facilities § 146.45 Pollution incidents. Oil pollution.... Additional provisions concerning liability and compensation because of oil pollution are contained in...

33 CFR 146.45 - Pollution incidents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Pollution incidents. 146.45...) OUTER CONTINENTAL SHELF ACTIVITIES OPERATIONS OCS Facilities § 146.45 Pollution incidents. Oil pollution.... Additional provisions concerning liability and compensation because of oil pollution are contained in...

33 CFR 146.45 - Pollution incidents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Pollution incidents. 146.45...) OUTER CONTINENTAL SHELF ACTIVITIES OPERATIONS OCS Facilities § 146.45 Pollution incidents. Oil pollution.... Additional provisions concerning liability and compensation because of oil pollution are contained in...

33 CFR 146.45 - Pollution incidents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Pollution incidents. 146.45...) OUTER CONTINENTAL SHELF ACTIVITIES OPERATIONS OCS Facilities § 146.45 Pollution incidents. Oil pollution.... Additional provisions concerning liability and compensation because of oil pollution are contained in...

33 CFR 146.45 - Pollution incidents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Pollution incidents. 146.45...) OUTER CONTINENTAL SHELF ACTIVITIES OPERATIONS OCS Facilities § 146.45 Pollution incidents. Oil pollution.... Additional provisions concerning liability and compensation because of oil pollution are contained in...

Residential proximity to industrial sites in the area of Taranto (Southern Italy). A case-control cancer incidence study.

PubMed

Marinaccio, Alessandro; Belli, Stefano; Binazzi, Alessandra; Scarselli, Alberto; Massari, Stefania; Bruni, Antonella; Conversano, Michele; Crosignani, Paolo; Minerba, Aldo; Zona, Amerigo; Comba, Pietro

2011-01-01

The association between cancer incidence and the residence near polluting facilities in an industrial area nearby Taranto has been investigated. Age, sex and occupational exposure were controlled as confounding variables in a case-control study (658 cases, 2092 controls). High risks were evidenced close to the steel mill (OR: 3.54), coke plant (OR: 4.80), mineral deposit (OR: 3.33) and shipbuilding (OR: 4.29) for pleural neoplasm, and to the steel mill (OR: 1.65) and shipbuilding (OR: 1.79) for lung cancer. After adjustment for occupational exposure, increasing trends of risk were observed both for lung and bladder cancers. Cancer risks were evidenced near industrial sites and the introduction of "occupational exposure" as a confounder modified significantly the risks with respect to distance from the source of pollution, particularly for pleural, lung and bladder cancers.

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT OF THE U.S. ARMY CORPS OF ENGINEERS CIVIL WORKS FACILITIES

EPA Science Inventory

The Pollution Prevention Opportunity Assessments (PPOA) summarized here were conducted at the following representative Army Corps of Engineers (USAGE) Civil Works facilities: Pittsburgh Engineering Warehouse and Repair Station (PEWARS) and Emsworth Locks and Dams in Pittsburgh, P...

Stormwater Pollution Prevention Plan TA-60 Roads and Grounds Facility and Associated Sigma Mesa Staging Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandoval, Leonard Frank

This Stormwater Pollution Prevention Plan (SWPPP) is applicable to operations at the Technical Area -60 (TA-60) Roads and Grounds Facility and Associated Sigma Mesa Staging Area off Eniwetok Drive, in Los Alamos County, New Mexico.

A cost-benefit analysis of a pellet boiler with electrostatic precipitator versus conventional biomass technology: A case study of an institutional boiler in Syracuse, New York.

PubMed

Levy, Jonathan I; Biton, Leiran; Hopke, Philip K; Zhang, K Max; Rector, Lisa

2017-07-01

Biomass facilities have received increasing attention as a strategy to increase the use of renewable fuels and decrease greenhouse gas emissions from the electric generation and heating sectors, but these facilities can potentially increase local air pollution and associated health effects. Comparing the economic costs and public health benefits of alternative biomass fuel, heating technology, and pollution control technology options provides decision-makers with the necessary information to make optimal choices in a given location. For a case study of a combined heat and power biomass facility in Syracuse, New York, we used stack testing to estimate emissions of fine particulate matter (PM 2.5 ) for both the deployed technology (staged combustion pellet boiler with an electrostatic precipitator) and a conventional alternative (wood chip stoker boiler with a multicyclone). We used the atmospheric dispersion model AERMOD to calculate the contribution of either fuel-technology configuration to ambient primary PM 2.5 in a 10km×10km region surrounding the facility, and we quantified the incremental contribution to population mortality and morbidity. We assigned economic values to health outcomes and compared the health benefits of the lower-emitting technology with the incremental costs. In total, the incremental annualized cost of the lower-emitting pellet boiler was $190,000 greater, driven by a greater cost of the pellet fuel and pollution control technology, offset in part by reduced fuel storage costs. PM 2.5 emissions were a factor of 23 lower with the pellet boiler with electrostatic precipitator, with corresponding differences in contributions to ambient primary PM 2.5 concentrations. The monetary value of the public health benefits of selecting the pellet-fired boiler technology with electrostatic precipitator was $1.7 million annually, greatly exceeding the differential costs even when accounting for uncertainties. Our analyses also showed complex spatial patterns of health benefits given non-uniform age distributions and air pollution levels. The incremental investment in a lower-emitting staged combustion pellet boiler with an electrostatic precipitator was well justified by the population health improvements over the conventional wood chip technology with a multicyclone, even given the focus on only primary PM 2.5 within a small spatial domain. Our analytical framework could be generalized to other settings to inform optimal strategies for proposed new facilities or populations. Copyright © 2017. Published by Elsevier Inc.

Case study project: The use of low-VOC/HAP coatings at wood furniture manufacturing facilities. Report for March 1995--March 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, A.M.; Jones, J.W.; Fields, J.L.

1999-07-01

The paper discusses a study of pollution prevention and the use of low-VOC/HAP (volatile organic compound/hazardous air pollutant) coatings at wood furniture manufacturing facilities. The study is to identify wood furniture and cabinet manufacturing facilities that have converted to low-VOC/HAP coatings and to develop case studies for those facilities. The case studies include a discussion of the types of products each facility manufactures; the types of low-VOC/HAP coatings each facility is using; problems encountered in converting to low-VOC/HAP coatings; equipment changes that were required; costs associated with the conversion process, including capital costs associated with equipment purchases, research and developmentmore » costs, and operating costs such as operator training in new application techniques;advantages/ disadvantages of the low-VOC/HAP coatings; and customer feedback on products finished with the low-VOC/HAP coatings. The paper discusses the progress of the study and pollution prevention options at wood furniture manufacturing facilities.« less

THE USEPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL (MFFP2T)

EPA Science Inventory

The USEPA has developed a pre-release version of a process simulation tool, the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), for the metal finishing industry. This presentation will provide a demonstration of the current version of this tool. The presentation will...

THE USEPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL (MFFP2T)

EPA Science Inventory

The USEPA has developed a pre-release version of a process simulation tool, the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), for the metal finishing industry. This presentation will provide a demonstration of the current version of this tool. The presentation wi...

40 CFR 430.95 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... apply to non-continuous dischargers. Only facilities where chlorophenolic-containing biocides are used... chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides: Subpart I [Facilities where fine paper is produced] [NSPS] Pollutant or pollutant property Kg/kkg...

Oil and Natural Gas Production Facilities National Emissions Standards for Hazardous Air Pollutants (NESHAP) Final Rule Fact Sheet

EPA Pesticide Factsheets

This page contains a January 2007 fact sheet for the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for Oil and Natural Gas Production Facilities. This document provides a summary of the 2007 final rule.

National Emission Standards for Hazardous Air Pollutants (NESHAP) for Source Categories: Perchloroethylene Dry Cleaning Facilities - 1993 Final Rule (58 FR 49354)

EPA Pesticide Factsheets

This document is a copy of the Federal Register publication of the September 22, 1993 Final Rule for the National Emission Standards for Hazardous Air Pollutants for Source Categories: Perchloroethylene Dry Cleaning Facilities.

75 FR 42361 - National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the Rocky Mountain Arsenal Federal Facility AGENCY: Environmental Protection Agency. ACTION: Proposed rule... Notice of Intent to Delete portions of the Rocky Mountain Arsenal Federal Facility (RMA) from the...

Flood risk assessment of land pollution hotspots

NASA Astrophysics Data System (ADS)

Masi, Matteo; Arrighi, Chiara; Iannelli, Renato

2017-04-01

Among the risks caused by extreme events, the potential spread of pollutants stored in land hotspots due to floods is an aspect that has been rarely examined with a risk-based approach. In this contribution, an attempt to estimate pollution risks related to flood events of land pollution hotspots was carried out. Flood risk has been defined as the combination of river flood hazard, hotspots exposure and vulnerability to contamination of the area, i.e. the expected severity of the environmental impacts. The assessment was performed on a geographical basis, using geo-referenced open data, available from databases of land management institutions, authorities and agencies. The list of land pollution hotspots included landfills and other waste handling facilities (e.g., temporary storage, treatment and recycling sites), municipal wastewater treatment plants, liquid waste treatment facilities and contaminated sites. The assessment was carried out by combining geo-referenced data of pollution hotspots with flood hazard maps. We derived maps of land pollution risk based on geographical and geological properties and source characteristics available from environmental authorities. These included information about soil particle size, soil hydraulic conductivity, terrain slope, type of stored pollutants, the type of facility, capacity, size of the area, land use, etc. The analysis was carried out at catchment scale. The case study of the Arno river basin in Tuscany (central Italy) is presented.

Oxygen Uptake. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

Biological waste treatment in the activated sludge process is based on the ability of microorganisms to use dissolved oxygen in breaking down soluble organic substances. The oxygen uptake test is a means of measuring the respiration rate of microorganisms in this process. Designed for individuals who have completed National Pollutant Discharge…

77 FR 24845 - Approval and Promulgation of Implementation Plans; South Dakota; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... various pollution controls in its BART analysis for Big Stone I, its cost impact analysis is skewed in... took into account the State's consideration of environmental impacts when reviewing the Big Stone I SO... shutdown are part of normal operations at facilities like Big Stone, and because these emissions impact...

Capillary Suction Time. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

Capillary suction time is time required for the liquid phase of a treated sludge to travel through 1 centimeter of media (blotter or filter paper). Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module provides waste water treatment plant operators with…

Filter Leaf. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

In the operation of vacuum filters and belt filters, it is desirable to evaluate the performance of different types of filter media and conditioning processes. The filter leaf test, which is used to evaluate these items, is described. Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1…

40 CFR 52.1167 - EPA-approved Massachusetts State regulations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 48303 c(117) Adds the following coating operations: plastic parts surface coating, leather surface... Includes Berkshire Air Pollution Control District to 7.05(4)(b)(2) so facilities in that district can apply....18(21) Surface coating of plastic parts 2/17/93 9/3/1999 64 FR 48304 c(117) Adds VOC RACT for plastic...

40 CFR 62.14560 - How do I comply with the increment of progress for submittal of a control plan?

Code of Federal Regulations, 2010 CFR

2010-07-01

... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Compliance Schedule and... requirements of this subpart. (2) The type(s) of waste to be burned. (3) The maximum design waste burning...

40 CFR 62.14560 - How do I comply with the increment of progress for submittal of a control plan?

Code of Federal Regulations, 2011 CFR

2011-07-01

... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Compliance Schedule and... requirements of this subpart. (2) The type(s) of waste to be burned. (3) The maximum design waste burning...

77 FR 11390 - Delegation of National Emission Standards for Hazardous Air Pollutants for Source Categories; Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-27

... Tanks. O Ethylene Oxide X X X Sterilization Facilities. Q Industrial Process Cooling X X Towers. R... Organic-Water Separators. WW Storage Vessels (Tanks)-- X X Control Level 2. XX Ethylene Manufacturing X X... Refractory Products X X Manufacturing. TTTTT Primary Magnesium Refining. X WWWWW Hospital Ethylene Oxide X X...

40 CFR 62.14560 - How do I comply with the increment of progress for submittal of a control plan?

Code of Federal Regulations, 2013 CFR

2013-07-01

... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Compliance Schedule and... requirements of this subpart. (2) The type(s) of waste to be burned. (3) The maximum design waste burning...

IMPLEMENTATION OF THE US ENVIRONMENTAL PROTECTION AGENCY'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL (MFFP2T)

EPA Science Inventory

The United States Environmental Protection Agency has developed a pre-release version of a process simulation tool, the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), for the metal finishing industry. This presentation will provide a demonstration of the current ver...

40 CFR 63.2131 - Am I subject to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What This... operate a nutritional yeast manufacturing facility that is, is located at, or is part of a major source of hazardous air pollutants (HAP) emissions. (1) A manufacturer of nutritional yeast is a facility that makes...

40 CFR 63.2131 - Am I subject to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What This... operate a nutritional yeast manufacturing facility that is, is located at, or is part of a major source of hazardous air pollutants (HAP) emissions. (1) A manufacturer of nutritional yeast is a facility that makes...

40 CFR 63.2131 - Am I subject to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What This... operate a nutritional yeast manufacturing facility that is, is located at, or is part of a major source of hazardous air pollutants (HAP) emissions. (1) A manufacturer of nutritional yeast is a facility that makes...

THE USEPA'S METAL FINISHING FACILITY RISK SCREENING TOOL (MFFRST) AND POLLUTION PREVENTION TOOL (MFFP2T)

EPA Science Inventory

This presentation will provide an overview of the USEPA's Metal Finishing Facility Risk Screening Tool, including a discussion of the models used and outputs. The tool is currently being expanded to include pollution prevention considerations as part of the model. The current st...

78 FR 21871 - Approval and Promulgation of State Plans for Designated Facilities and Pollutants: Connecticut...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-12

... promulgated on May 10, 2006. Connecticut DEEP's State Plan is for implementing and enforcing provisions at... and Promulgation of State Plans for Designated Facilities and Pollutants: Connecticut; 111(d)/129 Revised State Plan for Large and Small Municipal Waste Combustors AGENCY: Environmental Protection Agency...

Long-term benthic macroinvertebrate community monitoring to assess pollution abatement effectiveness.

PubMed

Smith, John G; Brandt, Craig C; Christensen, Sigurd W

2011-06-01

The benthic macroinvertebrate community of East Fork Poplar Creek (EFPC) in East Tennessee was monitored for 18 years to evaluate the effectiveness of a water pollution control program implemented at a major United States (U.S.) Department of Energy facility. Several actions were implemented to reduce and control releases of pollutants into the headwaters of the stream. Four of the most significant actions were implemented during different time periods, which allowed assessment of each action. Macroinvertebrate samples were collected annually in April from three locations in EFPC (EFK24, EFK23, and EFK14) and two nearby reference streams from 1986 through 2003. Significant improvements occurred in the macroinvertebrate community at the headwater sites (EFK24 and EFK23) after implementation of each action, while changes detected 9 km further downstream (EFK14) could not be clearly attributed to any of the actions. Because the stream was impacted at its origin, invertebrate recolonization was primarily limited to aerial immigration, thus, recovery has been slow. As recovery progressed, abundances of small pollution-tolerant taxa (e.g., Orthocladiinae chironomids) decreased and longer lived taxa colonized (e.g., hydropsychid caddisflies, riffle beetles, Baetis). While assessments lasting three to four years may be long enough to detect a response to new pollution controls at highly impacted locations, more time may be needed to understand the full effects. Studies on the effectiveness of pollution controls can be improved if impacted and reference sites are selected to maximize spatial and temporal trending, and if a multidisciplinary approach is used to broadly assess environmental responses (e.g., water quality trends, invertebrate and fish community assessments, toxicity testing, etc.).

Long-Term Benthic Macroinvertebrate Community Monitoring to Assess Pollution Abatement Effectiveness

NASA Astrophysics Data System (ADS)

Smith, John G.; Brandt, Craig C.; Christensen, Sigurd W.

2011-06-01

The benthic macroinvertebrate community of East Fork Poplar Creek (EFPC) in East Tennessee was monitored for 18 years to evaluate the effectiveness of a water pollution control program implemented at a major United States (U.S.) Department of Energy facility. Several actions were implemented to reduce and control releases of pollutants into the headwaters of the stream. Four of the most significant actions were implemented during different time periods, which allowed assessment of each action. Macroinvertebrate samples were collected annually in April from three locations in EFPC (EFK24, EFK23, and EFK14) and two nearby reference streams from 1986 through 2003. Significant improvements occurred in the macroinvertebrate community at the headwater sites (EFK24 and EFK23) after implementation of each action, while changes detected 9 km further downstream (EFK14) could not be clearly attributed to any of the actions. Because the stream was impacted at its origin, invertebrate recolonization was primarily limited to aerial immigration, thus, recovery has been slow. As recovery progressed, abundances of small pollution-tolerant taxa (e.g., Orthocladiinae chironomids) decreased and longer lived taxa colonized (e.g., hydropsychid caddisflies, riffle beetles, Baetis). While assessments lasting three to four years may be long enough to detect a response to new pollution controls at highly impacted locations, more time may be needed to understand the full effects. Studies on the effectiveness of pollution controls can be improved if impacted and reference sites are selected to maximize spatial and temporal trending, and if a multidisciplinary approach is used to broadly assess environmental responses (e.g., water quality trends, invertebrate and fish community assessments, toxicity testing, etc.).

Long-Term Benthic Macroinvertebrate Community Monitoring to Assess Pollution Abatement Effectiveness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, John G; Brandt, Craig C; Christensen, Sigurd W

2011-01-01

The benthic macroinvertebrate community of East Fork Poplar Creek (EFPC) in East Tennessee was monitored for 18 years to evaluate the effectiveness of a water pollution control program implemented at a major United States (U.S.) Department of Energy facility. Several actions were implemented to reduce and control releases of pollutants into the headwaters of the stream. Four of the most significant actions were implemented during different time periods, which allowed assessment of each action. Macroinvertebrate samples were collected annually in April from three locations in EFPC (EFK24, EFK23, and EFK14) and two nearby reference streams from 1986 through 2003. Significantmore » improvements occurred in the macroinvertebrate community at the headwater sites (EFK24 and EFK23) after implementation of each action, while changes detected 9 km further downstream (EFK14) could not be clearly attributed to any of the actions. Because the stream was impacted at its origin, invertebrate recolonization was primarily limited to aerial immigration, thus, recovery has been slow. As recovery progressed, abundances of small pollution-tolerant taxa (e.g., Orthocladiinae chironomids) decreased and longer lived taxa colonized (e.g., hydropsychid caddisflies, riffle beetles, Baetis). While assessments lasting three to four years may be long enough to detect a response to new pollution controls at highly impacted locations, more time may be needed to understand the full effects. Studies on the effectiveness of pollution controls can be improved if impacted and reference sites are selected to maximize spatial and temporal trending, and if a multidisciplinary approach is used to broadly assess environmental responses (e.g., water quality trends, invertebrate and fish community assessments, toxicity testing, etc.).« less

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain majormore » source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called 'major' or 'minor') has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Finally, our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.« less

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States

DOE PAGES

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin; ...

2017-04-26

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain majormore » source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called 'major' or 'minor') has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Finally, our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.« less

A comparative analysis: storm water pollution policy in California, USA and Victoria, Australia.

PubMed

Swamikannu, X; Radulescu, D; Young, R; Allison, R

2003-01-01

Urban drainage systems historically were developed on principles of hydraulic capacity for the transport of storm water to reduce the risk of flooding. However, with urbanization the percent of impervious surfaces increases dramatically resulting in increased flood volumes, peak discharge rates, velocities and duration, and a significant increase in pollutant loads. Storm water and urban runoff are the leading causes of the impairment of receiving waters and their beneficial uses in Australia and the United States today. Strict environmental and technology controls on wastewater treatment facilities and industry for more than three decades have ensured that these sources are less significant today as the cause of impairment of receiving waters. This paper compares the approach undertaken by the Environmental Protection Authority Victoria for the Melbourne metropolitan area with the approach implemented by the California Environmental Protection Agency for the Los Angeles area to control storm water pollution. Both these communities are largely similar in population size and the extent of urbanization. The authors present an analysis of the different approaches contrasting Australia with the USA, comment on their comparative success, and discuss the relevance of the two experiences for developed and developing nations in the context of environmental policy making to control storm water and urban runoff pollution.

Potential Air Pollutant Emissions and Permitting Classifications for Two Biorefinery Process Designs in the United States.

PubMed

Eberle, Annika; Bhatt, Arpit; Zhang, Yimin; Heath, Garvin

2017-06-06

Advanced biofuel production facilities (biorefineries), such as those envisioned by the United States (U.S.) Renewable Fuel Standard and U.S. Department of Energy's research and development programs, often lack historical air pollutant emissions data, which can pose challenges for obtaining air emission permits that are required for construction and operation. To help fill this knowledge gap, we perform a thorough regulatory analysis and use engineering process designs to assess the applicability of federal air regulations and quantify air pollutant emissions for two feasibility-level biorefinery designs. We find that without additional emission-control technologies both biorefineries would likely be required to obtain major source permits under the Clean Air Act's New Source Review program. The permitting classification (so-called "major" or "minor") has implications for the time and effort required for permitting and therefore affects the cost of capital and the fuel selling price. Consequently, we explore additional technically feasible emission-control technologies and process modifications that have the potential to reduce emissions to achieve a minor source permitting classification. Our analysis of air pollutant emissions and controls can assist biorefinery developers with the air permitting process and inform regulatory agencies about potential permitting pathways for novel biorefinery designs.

Heavy metals in industrially emitted particulate matter in Ile-Ife, Nigeria.

PubMed

Ogundele, Lasun T; Owoade, Oyediran K; Hopke, Philip K; Olise, Felix S

2017-07-01

Iron and steel smelting facilities generate large quantities of airborne particulate matter (PM) through their various activities and production processes. The resulting PM that contains a variety of heavy metals has potentially detrimental impacts on human health and the environment. This study was conducted to assess the potential health effects of the pollution from the heavy metals in the airborne PM sampled in the vicinity of secondary smelting operations in Ile-Ife, Nigeria. X-ray fluorescence (XRF) was used to determine the elemental concentration of Pb, Cr, Cd, Zn, Mn, As, Fe, Cu, and Ni in the size-segregated PM samples. Pollution Indices (PI) consisting of Contamination Factor (CF), Degree of Contamination (DC) and Pollution Index Load (PLI) and Target Hazard Quotient (THQ) were employed to assess the pollution risk associated with the heavy metals in the PM. CF, DC and PLI values were 3< CF <6, >32 and >1, respectively for the three sites, indicating deterioration of the ambient air quality in the vicinity of the smelter. The heavy metals in the airborne PM pose a severe health risk to people living in vicinity of the facility and to its workers. The diminished air quality with the associated health risks directly depends on the industrial emissions from steel production and control measures are recommended to mitigate the likely risks. Copyright © 2017 Elsevier Inc. All rights reserved.

40 CFR 63.2131 - Am I subject to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What This Subpart Covers § 63... nutritional yeast manufacturing facility that is, is located at, or is part of a major source of hazardous air pollutants (HAP) emissions. (1) A manufacturer of nutritional yeast is a facility that makes yeast for the...

40 CFR 63.2131 - Am I subject to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What This Subpart Covers § 63... nutritional yeast manufacturing facility that is, is located at, or is part of a major source of hazardous air pollutants (HAP) emissions. (1) A manufacturer of nutritional yeast is a facility that makes yeast for the...

75 FR 78952 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants; Commonwealth of Virginia... Declaration and Withdrawal of EPA Plan Approval AGENCY: Environmental Protection Agency (EPA). ACTION... request for EPA withdrawal of its section 111(d)/129 plan (the plan) approval for HMIWI units. Submittal...

Evaluating the Effects of Air Pollution from a Plastic Recycling Facility on the Health of Nearby Residents.

PubMed

Xin, Zhao; Tsuda, Toshihide; Doi, Hiroyuki

2017-06-01

We evaluated how exposure to airborne volatile organic compounds emitted from a plastic recycling facility affected nearby residents, in a cross-sectional study. Individuals>10 years old were randomly sampled from 50 households at five sites and given questionnaires to complete. We categorized the subjects by distance from the recycling facility and used this as a proxy measure for pollutant exposure. We sought to improve on a preceding study by generating new findings, improving methods for questionnaire distribution and collection, and refining site selection. We calculated the odds of residents living 500 or 900 m away from the facility reporting mucocutaneous and respiratory symptoms using a reference group of residents 2,800 m away. Self-reported nasal congestion (odds ratio=3.0, 95% confidence interval=1.02-8.8), eczema (5.1, 1.1-22.9), and sore throat (3.9, 1.1-14.1) were significantly higher among residents 500 m from the facility. Those 900 m away were also considerably more likely to report experiencing eczema (4.6, 1.4-14.9). Air pollution was found responsible for significantly increased reports of mucocutaneous and respiratory symptoms among nearby residents. Our findings confirm the effects of pollutants emitted from recycling facilities on residents' health and clarify that study design differences did not affect the results.

JPRS Report, Environmental Issues

DTIC Science & Technology

1990-06-27

multilateral cooperation in addition to military -political and international legal problems. Special attention was paid to discussing measures to protect the...Aleksandr Kanishchev] [Text] Moscow June 20 TASS—Problems related to the ecological situation around Soviet military bases in Czechoslovakia have...selves—a situation in which they make little or no provision for pollution control facilities. The regulations, expected to be based on the outcome

An evaluation of the urban stormwater pollutant removal efficiency of catch basin inserts.

PubMed

Morgan, Robert A; Edwards, Findlay G; Brye, Kristofor R; Burian, Stephen J

2005-01-01

In a storm sewer system, the catch basin is the interface between surface runoff and the sewer. Responding to the need to improve the quality of stormwater from urban areas and transportation facilities, and spurred by Phase I and II Stormwater Rules from the U.S. Environmental Protection Agency, several companies market catch basin inserts as best management practices for urban water quality management. However, little data have been collected under controlled tests that indicate the pollutant removal efficiency of these inserts when the inflow is near what can be expected to occur in the field. A stormwater simulator was constructed to test inserts under controlled and replicable conditions. The inserts were tested for removal efficiency of total suspended solids (TSS) and total petroleum hydrocarbons (TPH) at an inflow rate of 757 to 814 L/min, with influent pollutant concentrations of 225 mg/L TSS and 30 mg/L TPH. These conditions are similar to stormwater runoff from small commercial sites in the southeastern United States. Results from the tests indicate that at the test flowrate and pollutant concentration, average TSS removal efficiencies ranged from 11 to 42% and, for TPH, the removal efficiency ranged from 10 to 19%.

Discussion about initial runoff and volume capture ratio of annual rainfall.

PubMed

Zhang, Kun; Che, Wu; Zhang, Wei; Zhao, Yang

2016-10-01

In recent years, runoff pollution from urban areas has become a major concern all over the world. But there exists a worldwide confusion about how much stormwater should be captured for the purpose of runoff pollution control. Furthermore, the construction cost and pollution control efficiency are closely linked with the size of stormwater facilities, which is then related to the first flush (FF) phenomenon and volume capture ratio of annual rainfall (VCRa). Based on this background, analysis of the random and changeable characteristics of the occurrence of FF was carried out first, which was proved to vary with catchment characteristics and pollutant types. Secondly, the distribution of design rainfall depth toward 85% VCRa in China and its causes have been analyzed. Thirdly, the relationship between initial runoff and VCRa has been studied at both conceptual and numerical levels, and the change rule of VCRa along with design rainfall depth in different regions has been studied. The limitation of initial runoff has been illustrated from the perspective of runoff characteristics of single rainfall events in the first part, and from the perspective of regional differences in the two subsequent parts.

Shuttle optical environment; Proceedings of the Meeting, Washington, DC, April 23, 24, 1981

NASA Technical Reports Server (NTRS)

Miller, E. R. (Editor); Fazio, G. G.

1982-01-01

The numerical modeling, instrumentation, identification, and procedures to characterize and/or control contamination hazards to equipment used on the Shuttle are discussed. On-orbit pollutants include molecular offgassing and outgassing, particulate material, and substances from thrusters, vents, and leaks. Clean-rooms are being implemented in ground assembly and integration facilities. Attention is given to an upgraded SPACE program for numerically modeling contamination pathways and appropriate procedures to protect instrumentation from film and particulate deposition. Finally, attention is given to military cryogenic IR detectors being employed to quantify the Shuttle thermal and solid pollutant environment on-orbit as a prelude to future operational IR sensors.

Biological indicators for monitoring water quality of MTF canals system

NASA Technical Reports Server (NTRS)

Sethi, S. L.

1975-01-01

Biological models, diversity indexes, were developed to predict environmental effects of NASA's Mississippi test facility (MTF) chemical operations on canal systems in the area. To predict the effects on local streams, a physical model of unpolluted streams was established. The model is fed by artesian well water free of background levels of pollutants. The species diversity and biota composition of unpolluted MTF stream was determined; resulting information will be used to form baseline data for future comparisons. Biological modeling was accomplished by adding controlled quantities or kinds of chemical pollutants and evaluating the effects of these chemicals on the biological life of the stream.

Surface water pollution in three urban territories of Nepal, India, and Bangladesh.

PubMed

Karn, S K; Harada, H

2001-10-01

In South Asian countries such as Nepal, India, and Bangladesh, pollution of rivers is more severe and critical near urban stretches due to huge amounts of pollution load discharged by urban activities. The Bagmati River in the Kathmandu valley, the Yamuna River at Delhi, and peripheral rivers (mainly Buriganga River) of Dhaka suffer from severe pollution these days. The observed dry season average of biochemical oxygen demand (BOD) in all these rivers is in the range of 20-30 mg/liter and total coliform are as high as 104-105 MPN/100 ml. Per capita pollution load discharge of urban areas has been estimated to be about 31, 19, and 25 g BOD/capita/day in Bagmati, Yamuna, and the rivers of Dhaka, respectively. Regression analysis reveals pollution loads steadily increasing nearly in step with the trend in urbanization. The dissolved oxygen (DO) level of the Bagmati and Buriganga rivers is declining at an average annual rate of nearly 0.3 mg/liter/year. Unplanned urbanization and industrialization occurring in these cities may be largely responsible for this grave situation. Inadequate sewerage, on-site sanitation, and wastewater treatment facilities in one hand, and lack of effective pollution control measures and their strict enforcement on the other are the major causes of rampant discharge of pollutants in the aquatic systems.

Pollution prevention opportunity assessment for Facilities Maintenance Team (FMT) paint shop.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klossner, Kristin Ann

This Pollution Prevention Opportunity Assessment (PPOA) was conducted for Sandia National Laboratories/California Facilities Maintenance Team Paint Shop Operations in August and September 2002. The primary purpose of this PPOA is to provide recommendations to assist Paint Shop personnel in reducing the generation of waste and improving the efficiency of their processes. This report contains a summary of the information collected and analyses performed and recommends options for implementation. The Sandia National Laboratories Pollution Prevention staff will continue to work with the Paint Shop to implement the recommendations.

Microscale air quality impacts of distributed power generation facilities.

PubMed

Olaguer, Eduardo P; Knipping, Eladio; Shaw, Stephanie; Ravindran, Satish

2016-08-01

The electric system is experiencing rapid growth in the adoption of a mix of distributed renewable and fossil fuel sources, along with increasing amounts of off-grid generation. New operational regimes may have unforeseen consequences for air quality. A three-dimensional microscale chemical transport model (CTM) driven by an urban wind model was used to assess gaseous air pollutant and particulate matter (PM) impacts within ~10 km of fossil-fueled distributed power generation (DG) facilities during the early afternoon of a typical summer day in Houston, TX. Three types of DG scenarios were considered in the presence of motor vehicle emissions and a realistic urban canopy: (1) a 25-MW natural gas turbine operating at steady state in either simple cycle or combined heating and power (CHP) mode; (2) a 25-MW simple cycle gas turbine undergoing a cold startup with either moderate or enhanced formaldehyde emissions; and (3) a data center generating 10 MW of emergency power with either diesel or natural gas-fired backup generators (BUGs) without pollution controls. Simulations of criteria pollutants (NO2, CO, O3, PM) and the toxic pollutant, formaldehyde (HCHO), were conducted assuming a 2-hr operational time period. In all cases, NOx titration dominated ozone production near the source. The turbine scenarios did not result in ambient concentration enhancements significantly exceeding 1 ppbv for gaseous pollutants or over 1 µg/m(3) for PM after 2 hr of emission, assuming realistic plume rise. In the case of the datacenter with diesel BUGs, ambient NO2 concentrations were enhanced by 10-50 ppbv within 2 km downwind of the source, while maximum PM impacts in the immediate vicinity of the datacenter were less than 5 µg/m(3). Plausible scenarios of distributed fossil generation consistent with the electricity grid's transformation to a more flexible and modernized system suggest that a substantial amount of deployment would be required to significantly affect air quality on a localized scale. In particular, natural gas turbines typically used in distributed generation may have minor effects. Large banks of diesel backup generators such as those used by data centers, on the other hand, may require pollution controls or conversion to natural gas-fired reciprocal internal combustion engines to decrease nitrogen dioxide pollution.

Philadelphia gas works medium-Btu coal gasification project: environmental assessment. [GKT supplied by Krupp-Koppers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-12-01

The coal gasification plant will occupy a 43-acre site, known as the Riverside Site, located along the Delaware River next to Port Richmond between the Betsy Ross and Benjamin Franklin Bridges. The cleared site was previously used for industrial purposes and has a G-2 industrial zoning. Adverse impacts during the construction phase of the project are not expected to be significantly different than those occurring during any major industrial construction project. During operation of the coal gasification facility, specific mitigative measures have been designed into the facility to avoid adverse environmental impacts wherever possible. In addition to these extensive engineeringmore » safeguards, elaborate monitoring and control instrumentation shall be used. The GKT entrained bed, oxygen-blown gasification process provided by Krupp/Koppers was selected because it is a commercially proven system and because of its positive environmental characteristics such as its ability to gasify many coal types and the fact that it does not produce tars, phenols, or ammonia. During gasification of the coal, pollutants such as heavy metals in the coal are concentrated into the slag and ash. None of these pollutants are found in the product gas. The facility will produce 250 tpd of non-hazardous slag and fly ash. The combined slag and fly ash will occupy 347 cubic yards per day of landfill volume. Available haulers and landfills have been identified.A sophisticated health and safety program will include appropriate monitoring instruments for CO, H/sub 2/, H/sub 2/S, polynuclear aromatic hydrocarbons, organic compounds, and coal dust. Air emissions from operation of the coal gasification plant are not considered significant. Dust control systems have been designed into the facility to minimize fugitive dust emissions.« less

[Algorithm for taking into account the average annual background of air pollution in the assessment of health risks].

PubMed

Fokin, M V

2013-01-01

State Budgetary Educational Institution of Higher Professional Education "I.M. Sechenov First Moscow State Medical University" of the Ministry of Health care and Social Development, Moscow, Russian Federation. The assessment of health risks from air pollution with emissions from industrial facilities, without the average annual background of air pollution does not meet sanitary legislation. However Russian Federal Service for Hydrometeorology and Environmental Monitoring issues official certificates for a limited number of areas covered by the observations of the full program on the stationary points. Questions of accounting average background air pollution in the evaluation of health risks from exposure to emissions from industrial facilities are considered.

Total pollution effect of urban surface runoff.

PubMed

Luo, Hongbing; Luo, Lin; Huang, Gu; Liu, Ping; Li, Jingxian; Hu, Sheng; Wang, Fuxiang; Xu, Rui; Huang, Xiaoxue

2009-01-01

For pollution research with regard to urban surface runoff, most sampling strategies to date have focused on differences in land usage. With single land-use sampling, total surface runoff pollution effect cannot be evaluated unless every land usage spot is monitored. Through a new sampling strategy known as mixed stormwater sampling for a street community at discharge outlet adjacent to river, this study assessed the total urban surface runoff pollution effect caused by a variety of land uses and the pollutants washed off from the rain pipe system in the Futian River watershed in Shenzhen City of China. The water quality monitoring indices were COD (chemical oxygen demand), TSS (total suspend solid), TP (total phosphorus), TN (total nitrogen) and BOD (biochemical oxygen demand). The sums of total pollution loads discharged into the river for the four indices of COD, TSS, TN, and TP over all seven rainfall events were very different. The mathematical model for simulating total pollution loads was established from discharge outlet mixed stormwater sampling of total pollution loads on the basis of four parameters: rainfall intensity, total land area, impervious land area, and pervious land area. In order to treat surface runoff pollution, the values of MFF30 (mass first flush ratio) and FF30 (first 30% of runoff volume) can be considered as split-flow control criteria to obtain more effective and economical design of structural BMPs (best management practices) facilities.

Understanding Excess Emissions from Industrial Facilities: Evidence from Texas.

PubMed

Zirogiannis, Nikolaos; Hollingsworth, Alex J; Konisky, David M

2018-03-06

We analyze excess emissions from industrial facilities in Texas using data from the Texas Commission on Environmental Quality. Emissions are characterized as excess if they are beyond a facility's permitted levels and if they occur during startups, shutdowns, or malfunctions. We provide summary data on both the pollutants most often emitted as excess emissions and the industrial sectors and facilities responsible for those emissions. Excess emissions often represent a substantial share of a facility's routine (or permitted) emissions. We find that while excess emissions events are frequent, the majority of excess emissions are emitted by the largest events. That is, the sum of emissions in the 96-100th percentile is often several orders of magnitude larger than the remaining excess emissions (i.e., the sum of emissions below the 95th percentile). Thus, the majority of events emit a small amount of pollution relative to the total amount emitted. In addition, a small group of high emitting facilities in the most polluting industrial sectors are responsible for the vast majority of excess emissions. Using an integrated assessment model, we estimate that the health damages in Texas from excess emissions are approximately $150 million annually.

Boiler MACT Technical Assistance (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-03-01

Fact sheet describing the changes to Environmental Protection Act process standards. The DOE will offer technical assistance to ensure that major sources burning coal and oil have information on cost-effective, clean energy strategies for compliance, and to promote cleaner, more efficient boiler burning to cut harmful pollution and reduce operational costs. The U.S. Environmental Protection Agency (EPA) is expected to finalize the reconsideration process for its Clean Air Act pollution standards National Emissions Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters (known as Boiler Maximum Achievable Control Technology (MACT)), in Spring 2012.more » This rule applies to large and small boilers in a wide range of industrial facilities and institutions. The U.S. Department of Energy (DOE) will offer technical assistance to ensure that major sources burning coal or oil have information on cost-effective clean energy strategies for compliance, including combined heat and power, and to promote cleaner, more efficient boilers to cut harmful pollution and reduce operational costs.« less

Do Facilities with Distant Headquarters Pollute More? How Civic Engagement Conditions the Environmental Performance of Absentee Managed Plants

ERIC Educational Resources Information Center

Grant, Don; Jones, Andrew W.; Trautner, Mary Nell

2004-01-01

Scholars agree that due to advances in transportation and communication technologies, firms can extend their reach and more easily externalize their pollution by setting up plants in far-flung, less regulated areas. They also concur that absentee managed plants or facilities with remote headquarters are rapidly becoming the modal type of…

Environmental Compliance and Pollution Prevention Training Manual for Campus-Based Organizations--Operational and Facility Maintenance Personnel.

ERIC Educational Resources Information Center

New York State Dept. of Environmental Conservation, Albany.

This manual was designed to be used as part of the Workshop on Environmental Compliance and Pollution Prevention for campus-based facilities. It contains basic information on New York state and federal laws, rules, and regulations for protecting the environment. The information presented is a summary with emphasis on those items believed to be…

EFFECTS OF ACTIVATED CHARCOAL FILTRATION AND OZONATION ON HYDROCARBON AND CARBONYL LEVELS OF AMBIENT AIR USED IN CONTROLLED-EXPOSURE CHAMBER STUDIES OF AIR POLLUTANT HUMAN HEALTH EFFECTS

EPA Science Inventory

Air sampling experiments were done in 1985, 1987, and 1993 at the human-exposure chamber facility of the U.S. EPA Health Effects Research Laboratory in Chapel Hill, NC. easurements of VOC's by GC-FID and aldehyde measurements by the DNPH silica gel cartridge method were made, com...

US Army Medical Bioengineering Research and Development Laboratory Annual Progress Report for FY 84. Volume 1

DTIC Science & Technology

1984-10-01

develop pollution abatement procedures for Army munition plants and military installations.n, t ftr Laboratory is also actively engaged in the...FACILITIES The physical plant provides over 100,000 square feet for research, development, testing, and administrative activities . Space is...protection of industrial workers and thq surrounding community at Army-controlled, industry-operated munition plants . G Environmental Quality program

Energy Conservation at the West Dover, Vermont, Water Pollution Control Facility.

DTIC Science & Technology

1982-11-01

chlorination of oxidation ditch effluent ---- 8 Discontinue aerobic digestion --------------------------- 8 Discharge contents of holding pond into...Immediate Discontinue aerobic digestion Instead of aerobically digesting the waste activated sludge, it may be possible to mix it directly with pond...elimi- nated by replacing the oxidation ditches with facultative ponds. Also, this would eliminate the need for aerobic digestion , in-plant process water

Mercury emission trend influenced by stringent air pollutants regulation for coal-fired power plants in Korea

NASA Astrophysics Data System (ADS)

Pudasainee, Deepak; Kim, Jeong-Hun; Seo, Yong-Chil

2009-12-01

Regulatory control of mercury emission from anthropogenic sources has become a global concern in the recent past. Coal-fired power plants are one of the largest sources of anthropogenic mercury emission into the atmosphere. This paper summarizes the current reducing trend of mercury emission as co-beneficial effect by more stringent regulation changes to control primary air pollutants with introducing test results from the commercial coal-fired facilities and suggesting a guideline for future regulatory development in Korea. On average, mercury emission concentrations ranged 16.3-2.7 μg Sm -3, 2.4-1.1 μg Sm -3, 3.1-0.7 μg Sm -3 from anthracite coal-fired power plants equipped with electrostatic precipitator (ESP), bituminous coal-fired power plants with ESP + flue gas desulphurization (FGD) and bituminous coal-fired power plants with selective catalytic reactor (SCR) + cold side (CS) - ESP + wet FGD, respectively. Among the existing air pollution control devices, the best configuration for mercury removal in coal-fired power plants was SCR + CS - ESP + wet FGD, which were installed due to the stringent regulation changes to control primary air pollutants emission such as SO 2, NOx and dust. It was estimated that uncontrolled and controlled mercury emission from coal-fired power plants as 10.3 ton yr -1 and 3.2 ton yr -1 respectively. After the installation of ESP, FGD and SCR system, following the enforcement of the stringent regulation, 7.1 ton yr -1 of mercury emission has been reduced (nearly 69%) from coal-fired power plants as a co-benefit control. Based on the overall study, a sample guideline including emission limits were suggested which will be applied to develop a countermeasure for controlling mercury emission from coal-fired power plants.

Control of ammonia and urea emissions from urea manufacturing facilities of Petrochemical Industries Company (PIC), Kuwait.

PubMed

Khan, A R; Al-Awadi, L; Al-Rashidi, M S

2016-06-01

Petrochemical Industries Company (PIC) in Kuwait has mitigated the pollution problem of ammonia and urea dust by replacing the melting and prilling units of finished-product urea prills with an environmentally friendly granulation process. PIC has financed a research project conducted by the Coastal and Air Pollution Program's research staff at the Kuwait Institute for Scientific Research to assess the impact of pollution control strategies implemented to maintain a healthy productive environment in and around the manufacturing premises. The project was completed in three phases: the first phase included the pollution monitoring of the melting and prilling units in full operation, the second phase covered the complete shutdown period where production was halted completely and granulation units were installed, and the last phase encompassed the current modified status with granulation units in full operation. There was substantial decrease in ammonia emissions, about 72%, and a 52.7% decrease in urea emissions with the present upgrading of old melting and prilling units to a state-of-the-art technology "granulation process" for a final finished product. The other pollutants, sulfur dioxide (SO2), nitrogen oxides (NOx), and volatile organic compounds (VOCs), have not shown any significant change, as the present modification has not affected the sources of these pollutants. Petrochemical Industries Company (PIC) in Kuwait has ammonia urea industries, and there were complaints about ammonia and urea dust pollution. PIC has resolved this problem by replacing "melting and prilling unit" of final product urea prills by more environmentally friendly "granulation unit." Environmental Pollution and Climate Program has been assigned the duty of assessing the outcome of this change and how that influenced ammonia and urea dust emissions from the urea manufacturing plant.

40 CFR Table 8 to Part 455 - List of Pollution Prevention Alternative Practices

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false List of Pollution Prevention... of Pollution Prevention Alternative Practices A modification to the list of practices on this table that an individual facility must comply with to be eligible for the pollution prevention alternative is...

40 CFR Table 8 to Part 455 - List of Pollution Prevention Alternative Practices

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false List of Pollution Prevention... of Pollution Prevention Alternative Practices A modification to the list of practices on this table that an individual facility must comply with to be eligible for the pollution prevention alternative is...

33 CFR 154.120 - Facility examinations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Facility examinations. 154.120...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK General § 154.120 Facility examinations. (a) The facility operator shall allow the Coast Guard, at any time, to make any examination and shall...

TA-3-38 Metals Fab SWPPP Rev 2 Jan 2017-Final

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgin, Jillian Elizabeth

The TA-3-38 MFS is part of LANL’s Utilities and Infrastructures (UI) Facilities Operations Directorate (FOD) with day-to-day management provided by the Logistics Division Central Shops (LOG-CS); which has established a Stormwater Pollution Prevention Team (PPT) whose members are responsible for assisting the facility manager in developing and revising the facility’s SWPPP as well as maintaining control measures and taking corrective actions when required. All PPT members will have access to either a hard copy or an electronic version of this SWPPP. A list of PPT members along with duties and contact information is provided in Appendix A of this SWPPP.

TA-3-38 Carpenter's Shop SWPPP Rev 2 Jan 2017-Final

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgin, Jillian Elizabeth

The TA-3-38 CS is part of LANL’s Utilities and Infrastructure (UI) Facilities Operations Directorate (FOD) with day-to-day management provided by the Logistics Division Central Shops (LOG-CS); which has established a Stormwater Pollution Prevention Team (PPT) whose members are responsible for assisting the facility manager in developing and revising the facility’s SWPPP as well as maintaining control measures and taking corrective actions when required. All PPT members will have access to either a hard copy or an electronic version of this SWPPP. A list of PPT members along with duties and contact information is provided in Appendix A of this SWPPP

Honey Lake Power Facility under construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-12-01

Geothermal energy and wood waste are primary energy sources for the 30 megawatt, net, Honey Lake Power Facility, a cogeneration power plant. The facility 60% completed in January 1989, will use 1,300 tons per day of fuel obtained from selective forest thinnings and from logging residue combined with mill wastes. The power plant will be the largest industrial facility to use some of Lassen County's geothermal resources. The facility will produce 236 million kilowatt-hours of electricity annually. The plant consists of a wood-fired traveling grate furnace with a utility-type high pressure boiler. Fluids from a geothermal well will pass throughmore » a heat exchange to preheat boiler feedwater. Used geothermal fluid will be disposed of in an injection well. Steam will be converted to electrical power through a 35.5-megawatt turbine generator and transmitted 22 miles to Susanville over company-owned and maintained transmission lines. The plant includes pollution control for particulate removal, ammonia injection for removal of nitrogen oxides, and computer-controlled combustion systems to control carbon monoxide and hydrocarbons. The highly automated wood yard consists of systems to remove metal, handle oversized material, receive up to six truck loads of wood products per hour, and continuously deliver 58 tons per hour of fuel through redundant systems to ensure maximum on-line performance. The plant is scheduled to become operational in mid-1989.« less

Air Pollutant Report | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Pollutant Loading Report (DMR) | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Water Pollution Search | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Dashboard and Water Pollution Search Comparison.png ...

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Downgrading Nuclear Facilities to Radiological Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jarry, Jeffrey F.; Farr, Jesse Oscar; Duran, Leroy

2015-08-01

Based on inventory reductions and the use of alternate storage facilities, the Sandia National Laboratories (SNL) downgraded 4 SNL Hazard Category 3 (HC-3) nuclear facilities to less-than-HC-3 radiological facilities. SNL’s Waste Management and Pollution Prevention Department (WMPPD) managed the HC-3 nuclear facilities and implemented the downgrade. This paper will examine the downgrade process,

33 CFR 159.201 - Recognition of facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Recognition of facilities. 159.201 Section 159.201 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) POLLUTION MARINE SANITATION DEVICES Recognition of Facilities § 159.201 Recognition of facilities...

Review of Facility Technology Options and their Development Status

DTIC Science & Technology

1989-06-01

added to these commercial technologies, such as flue gas desulfurization and low-NO x burners. " New coal-fired power technologies, such as AFBC, CFBC...Issues When compared to conventional technologies with pollution control equipment (such as pulverized coal/ flue gas desulfurization ), AFBC/CFBC systems...performance trade- offs exist. Since less energy is available in the flue gas as a result of heating water, less refrigerant vapor will be

Y2K: the moment of truth.

PubMed

Chepesiuk, R

1999-05-01

It remains to be seen whether the world will move in time to fix the Y2K bug, or whether computers around the world will shut down when the clock strikes midnight on 31 December 1999. Y2K could have a serious impact on environmental facilities, particularly given the extent to which computer software and microchips are now involved in pollution control and environmental monitoring and protection systems.

Y2K: the moment of truth.

PubMed Central

Chepesiuk, R

1999-01-01

It remains to be seen whether the world will move in time to fix the Y2K bug, or whether computers around the world will shut down when the clock strikes midnight on 31 December 1999. Y2K could have a serious impact on environmental facilities, particularly given the extent to which computer software and microchips are now involved in pollution control and environmental monitoring and protection systems. PMID:10210702

Biofiltration as a Viable Alternative for Air Pollution Control at Department of Defense Surface Coating Facilities

DTIC Science & Technology

2007-03-01

enzymes or energy to break down the contaminants (Devinny, 1999). Known biologically toxic compounds should be avoided altogether if using a...mesophilic and thermophilic temperature ranges, however, most biodegradation is executed by mesophiles and thermophiles (Leson and Winer, 1991). Of...ambient temperatures. Some microbes are known to function effectively in thermophilic conditions (40-55 °C). For example, microbes were shown to have

Analysis of Ozone And CO2 Profiles Measured At A Diary Facility

NASA Astrophysics Data System (ADS)

Ogunjemiyo, S. O.; Hasson, A. S.; Ashkan, S.; Steele, J.; Shelton, T.

2015-12-01

Ozone and carbon dioxide are both greenhouse gasses in the planetary boundary layer. Ozone is a harmful secondary pollutant in the troposphere produced mostly during the day when there is a photochemical reaction in which primary pollutant precursors such as nitrous oxide (NOx) or volatile organic compounds (VOC's) mix with sunlight. As with most pollutants in the lower troposphere, both ozone and carbon dioxide vary in spatial and temporal scale depending on sources of pollution, environmental conditions and the boundary layer dynamics. Among the several factors that influence ozone variation, the seasonal changes in meteorological parameters and availability of ozone precursors are crucial because they control ozone formation and decay. Understanding how the difference in emission sources affect vertical transport of ozone and carbon dioxide is considered crucial to the improvement of their regional inventory sources. The purpose of this study is to characterize vertical transport of ozone and carbon at a diary facility. The study was conducted in the summer of 2011 and 2012 at a commercial dairy facility in Central California and involved profile measurements of ozone and CO2 using electrochemical ozonesondes, meteorological sondes and CO2 probe tethered to a 9 cubic meters helium balloon. On each day of the data collection, multiple balloon launches were made over a period representing different stages of the boundary layer development. The results show ozone and CO2 profiles display different characteristics. Regardless of the time of the day, the CO2 concentration decreases with height with a sharp gradient near the surface that is strengthened by a stable atmospheric condition, a feature suggesting the surface as the source. On the other hand, ozone profiles show greater link to the evolution of the lower boundary layer. Ozone profiles display unique features indicating ozone destruction near the surface. This unusual near the surface, observed even in the afternoon when the boundary layer is fully developed, greatly contrast ozone profiles are typical of urban environment

An investigation of wash-off controlling parameters at urban and commercial monitoring sites.

PubMed

Berretta, C; Gnecco, I; Lanza, L G; La Barbera, P

2007-01-01

The relationship between the parameters of the wash-off function and the controlling hydrologic variables are investigated in this paper, assuming that the pollutant generation process basically depends on the watershed rainfall-runoff response characteristics. Data collected during an intense monitoring program carried out by the Department of Environmental Engineering of the University of Genova (Italy) within a residential area, an auto dismantler facility, a tourism terminal and a urban waste truck depot are used to this aim. The observed runoff events are classified into different TSS mass delivery processes and the occurrence of the first flush phenomenon is also investigated. The correlation between the mathematical parameters describing the exponential process and the hydrological parameters of the corresponding rainfall-runoff event is analysed: runoff parameters and in particular the maximum flow discharge over the time of concentration of the drainage network are proposed as the controlling factor for the total mass of pollutant that is made available for wash-off during each runoff event.

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Feo, Giovanni, E-mail: g.defeo@unisa.it; De Gisi, Sabino; Williams, Ian D.

Highlights: ► Effects of closing MSW facilities on perception of odour and pollution studied. ► Residents’ perception of odour nuisance considerably diminished post closure. ► Odour perception showed an association with distance from MSW facilities. ► Media coverage increased knowledge about MSW facilities and how they operate. ► Economic compensation possibly affected residents’ views and concerns. - Abstract: If residents’ perceptions, concerns and attitudes towards waste management facilities are either not well understood or underestimated, people can produce strong opposition that may include protest demonstrations and violent conflicts such as those experienced in the Campania Region of Italy. The aimmore » of this study was to verify the effects of the closure of solid waste treatment and disposal facilities (two landfills and one RDF production plant) on public perception of odour and environmental pollution. The study took place in four villages in Southern Italy. Identical questionnaires were administered to residents during 2003 and after the closure of the facilities occurred in 2008. The residents’ perception of odour nuisance considerably diminished between 2003 and 2009 for the nearest villages, with odour perception showing an association with distance from the facilities. Post closure, residents had difficulty in identifying the type of smell due to the decrease in odour level. During both surveys, older residents reported most concern about the potentially adverse health impacts of long-term exposure to odours from MSW facilities. However, although awareness of MSW facilities and concern about potentially adverse health impacts varied according to the characteristics of residents in 2003, substantial media coverage produced an equalisation effect and increased knowledge about the type of facilities and how they operated. It is possible that residents of the village nearest to the facilities reported lower awareness of and concern about odour and environmental pollution because the municipality received economic compensation for their presence.« less

Pollutant Loading Report Help - DMR | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Rationale for Re-evaluating the POTW Typical Pollutant ...

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Pollutant Loading Report Help - TRI | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Linking DMR and TRI Data in the DMR Pollutant Loading Tool ...

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

40 CFR 63.5692 - How do I know if my boat manufacturing facility is a new source or an existing source?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 12 2011-07-01 2009-07-01 true How do I know if my boat manufacturing... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing What the Subpart Covers § 63.5692 How do I know if my boat manufacturing facility is a new source...

40 CFR 63.5692 - How do I know if my boat manufacturing facility is a new source or an existing source?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true How do I know if my boat manufacturing... AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing What the Subpart Covers § 63.5692 How do I know if my boat manufacturing facility is a new source...

Water Pollution Search Criteria Help | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Water Pollution Search Results Help - TRI | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

Water Pollutant Loading Tool Modernization | ECHO | US EPA

EPA Pesticide Factsheets

ECHO, Enforcement and Compliance History Online, provides compliance and enforcement information for approximately 800,000 EPA-regulated facilities nationwide. ECHO includes permit, inspection, violation, enforcement action, and penalty information about facilities regulated under the Clean Air Act (CAA) Stationary Source Program, Clean Water Act (CWA) National Pollutant Elimination Discharge System (NPDES), and/or Resource Conservation and Recovery Act (RCRA). Information also is provided on surrounding demographics when available.

[Experimental research of oil vapor pollution control for gas station with membrane separation technology].

PubMed

Zhu, Ling; Chen, Jia-Qing; Zhang, Bao-Sheng; Wang, Jian-Hong

2011-12-01

Two kinds of membranes modules, vapor retained glassy membrane based on PEEK hollow fiber membrane modules and vapor permeated rubbery membrane system based on GMT plate-and-frame membrane modules, were used to control the oil vapor pollution during the course of receiving and transferring gasoline in oil station. The efficiencies of the membrane module and the membrane system of them were evaluated and compared respectively in the facilities which were developed by ourselves. It was found that both the two kinds of membranes modules had high efficiency for the separation of VOCs-air mixed gases, and the outlet vapor after treatment all can meet the national standard. When the vapor-enriched gas was returned to the oil tank to simulate the continuously cycle test, the concentration of VOCs in the outlet was also below 25 g x m(-3).

NPDES Permit for Riverview Estates Wastewater Treatment Facility in North Dakota

EPA Pesticide Factsheets

Under National Pollutant Discharge Elimination System permit number ND-0031143, the Riverview Estates Wastewater Treatment Facility is authorized to discharge from its wastewater treatment facility in designated locations as described in the permit.

40 CFR 63.7180 - What is the purpose of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Semiconductor Manufacturing What... emission standards for hazardous air pollutants (NESHAP) for semiconductor manufacturing facilities. This...

40 CFR 63.7180 - What is the purpose of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Semiconductor Manufacturing What... emission standards for hazardous air pollutants (NESHAP) for semiconductor manufacturing facilities. This...

Stormwater management criteria for on-site pollution control: a comparative assessment of international practices.

PubMed

Sage, Jérémie; Berthier, Emmanuel; Gromaire, Marie-Christine

2015-07-01

Over the last decade, a growing interest has been shown toward innovative stormwater management practices, breaking away from conventional "end of pipe" approaches (based on conveying water offsite to centralized detention facilities). Innovative strategies, referred to as sustainable urban drainage systems, low impact development (LID) or green infrastructures, advocating for management of runoff as close to its origin as possible, have therefore gained a lot of popularity among practitioners and public authorities. However, while the need for pollution control is generally well accepted, there is no wide agreement about management criteria to be given to developers. This article hence aims to compare these criteria through literature analysis of different state or local stormwater management manuals or guidelines, investigating both their suitability for pollution control and their influence on best management practices selection and design. Four categories of criteria were identified: flow-rate limitations, "water quality volumes" (to be treated), volume reduction (through infiltration or evapotranspiration), and non-hydrologic criteria (such as loads reduction targets or maximum effluent concentrations). This study suggests that hydrologic criteria based on volume reduction (rather than treatment) might generally be preferable for on-site control of diffuse stormwater pollution. Nonetheless, determination of an appropriate management approach for a specific site is generally not straightforward and presents a variety of challenges for site designers seeking to satisfy local requirements in addressing stormwater quantity and quality issues. The adoption of efficient LID solution may therefore strongly depend on the guidance given to practitioners to account for these management criteria.

Stormwater Management Criteria for On-Site Pollution Control: A Comparative Assessment of International Practices

NASA Astrophysics Data System (ADS)

Sage, Jérémie; Berthier, Emmanuel; Gromaire, Marie-Christine

2015-07-01

Over the last decade, a growing interest has been shown toward innovative stormwater management practices, breaking away from conventional "end of pipe" approaches (based on conveying water offsite to centralized detention facilities). Innovative strategies, referred to as sustainable urban drainage systems, low impact development (LID) or green infrastructures, advocating for management of runoff as close to its origin as possible, have therefore gained a lot of popularity among practitioners and public authorities. However, while the need for pollution control is generally well accepted, there is no wide agreement about management criteria to be given to developers. This article hence aims to compare these criteria through literature analysis of different state or local stormwater management manuals or guidelines, investigating both their suitability for pollution control and their influence on best management practices selection and design. Four categories of criteria were identified: flow-rate limitations, "water quality volumes" (to be treated), volume reduction (through infiltration or evapotranspiration), and non-hydrologic criteria (such as loads reduction targets or maximum effluent concentrations). This study suggests that hydrologic criteria based on volume reduction (rather than treatment) might generally be preferable for on-site control of diffuse stormwater pollution. Nonetheless, determination of an appropriate management approach for a specific site is generally not straightforward and presents a variety of challenges for site designers seeking to satisfy local requirements in addressing stormwater quantity and quality issues. The adoption of efficient LID solution may therefore strongly depend on the guidance given to practitioners to account for these management criteria.

Evaluating emissions of HCHO, HONO, NO2, and SO2 from point sources using portable Imaging DOAS

NASA Astrophysics Data System (ADS)

Pikelnaya, O.; Tsai, C.; Herndon, S. C.; Wood, E. C.; Fu, D.; Lefer, B. L.; Flynn, J. H.; Stutz, J.

2011-12-01

Our ability to quantitatively describe urban air pollution to a large extent depends on an accurate understanding of anthropogenic emissions. In areas with a high density of individual point sources of pollution, such as petrochemical facilities with multiple flares or regions with active commercial ship traffic, this is particularly challenging as access to facilities and ships is often restricted. Direct formaldehyde emissions from flares may play an important role for ozone chemistry, acting as an initial radical precursor and enhancing the degradation of co-emitted hydrocarbons. HONO is also recognized as an important OH source throughout the day. However, very little is known about direct HCHO and HONO emissions. Imaging Differential Optical Absorption Spectroscopy (I-DOAS), a relatively new remote sensing technique, provides an opportunity to investigate emissions from these sources from a distance, making this technique attractive for fence-line monitoring. In this presentation, we will describe I-DOAS measurements during the FLAIR campaign in the spring/summer of 2009. We performed measurements outside of various industrial facilities in the larger Houston area as well as in the Houston Ship Channel to visualize and quantify the emissions of HCHO, NO2, HONO, and SO2 from flares of petrochemical facilities and ship smoke stacks. We will present the column density images of pollutant plumes as well as fluxes from individual flares calculated from I-DOAS observations. Fluxes from individual flares and smoke stacks determined from the I-DOAS measurements vary widely in time and by the emission sources. We will also present HONO/NOx ratios in ship smoke stacks derived from the combination of I-DOAS and in-situ measurements, and discuss other trace gas ratios in plumes derived from the I-DOAS observations. Finally, we will show images of HCHO, NO2 and SO2 plumes from control burn forest fires observed in November of 2009 at Vandenberg Air Force Base, Santa Maria, CA.

76 FR 43230 - National Pollutant Discharge Elimination System-Cooling Water Intake Structures at Existing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... Facilities and Phase I Facilities AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule...) of the Clean Water Act for all existing power generating facilities and existing manufacturing and industrial facilities. EPA requested that public comments on the proposal be submitted on or before July 19...

Air Pollution, Causes and Cures.

ERIC Educational Resources Information Center

Manufacturing Chemists Association, Washington, DC.

This commentary on sources of air pollution and air purification treatments is accompanied by graphic illustrations. Sources of carbon monoxide, sulfur oxides, nitrogen oxides, and hydrocarbons found in the air are discussed. Methods of removing these pollutants at their source are presented with cut-away diagrams of the facilities and technical…

CHARACTERIZATION OF PRIORITY POLLUTANTS FROM A SECONDARY LEAD AND BATTERY MANUFACTURING FACILITY

EPA Science Inventory

A plant site at which secondary lead is produced from old batteries was sampled utilizing the U.S. EPA protocol for the priority pollutants. The waste treatment plant at this site uses lime and settle techniques to remove pollutants from the wastewater before it is discharged int...

Calculation of intercepted runoff depth based on stormwater quality and environmental capacity of receiving waters for initial stormwater pollution management.

PubMed

Peng, Hai-Qin; Liu, Yan; Gao, Xue-Long; Wang, Hong-Wu; Chen, Yi; Cai, Hui-Yi

2017-11-01

While point source pollutions have gradually been controlled in recent years, the non-point source pollution problem has become increasingly prominent. The receiving waters are frequently polluted by the initial stormwater from the separate stormwater system and the wastewater from sewage pipes through stormwater pipes. Consequently, calculating the intercepted runoff depth has become a problem that must be resolved immediately for initial stormwater pollution management. The accurate calculation of intercepted runoff depth provides a solid foundation for selecting the appropriate size of intercepting facilities in drainage and interception projects. This study establishes a separate stormwater system for the Yishan Building watershed of Fuzhou City using the InfoWorks Integrated Catchment Management (InfoWorks ICM), which can predict the stormwater flow velocity and the flow of discharge outlet after each rainfall. The intercepted runoff depth is calculated from the stormwater quality and environmental capacity of the receiving waters. The average intercepted runoff depth from six rainfall events is calculated as 4.1 mm based on stormwater quality. The average intercepted runoff depth from six rainfall events is calculated as 4.4 mm based on the environmental capacity of the receiving waters. The intercepted runoff depth differs when calculated from various aspects. The selection of the intercepted runoff depth depends on the goal of water quality control, the self-purification capacity of the water bodies, and other factors of the region.

Secondary Aluminum Production: National Emission Standards for Hazardous Air Pollutants

EPA Pesticide Factsheets

National emission standards for hazardous air pollutants (NESHAP) for new and existing sources at secondary aluminum production facilities. Includes rule history, summary, federal register citations and implementation information.

Pharmaceuticals Production Industry: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

National emission standards for hazardous air pollutants (NESHAP) from facilities that manufacture pharmaceutical products. Includes rule history, Federal Register citations, implementation and compliance information, and additional resources.

TRI Pollution Prevention Reporting Tipsheet

EPA Pesticide Factsheets

TRI Pollution Prevention Reporting Tipsheet is provided to encourage and assist TRI facilities with reporting optional P2 information on their TRI reporting forms, and to facilitate information sharing within and across organizations.

Acoustic Directivity Patterns for Army Weapons

DTIC Science & Technology

1979-01-01

work was performed by the Environmental Division (EN), u.S. Army Construction Engineering Research Laboratory (CERL). Dr. R. K. Jain is Chief of EN...V) P.0. Schomer,,, L. M./Little I rTPRFORMING ORGANI ZATION NAME AND ADDRESS 0.PROG3RAM ELEMENT. PPOJECT, TAWF U.S. ARMY AREA & WORK UNIT NUMBERS...34Environmental Quality for Construction and Operation of Military Facilities" Task 03, "Pollution Control Technology" and Work Unit 001, "Prediction of

Lung cancer risk and pollution in an industrial region of Northern Spain: a hospital-based case-control study.

PubMed

López-Cima, María Felicitas; García-Pérez, Javier; Pérez-Gómez, Beatriz; Aragonés, Nuria; López-Abente, Gonzalo; Tardón, Adonina; Pollán, Marina

2011-01-25

Asturias, an Autonomous Region in Northern Spain with a large industrial area, registers high lung cancer incidence and mortality. While this excess risk of lung cancer might be partially attributable to smoking habit and occupational exposure, the role of industrial and urban pollution also needs to be assessed. The objective was to ascertain the possible effect of air pollution, both urban and industrial, on lung cancer risk in Asturias. This was a hospital-based case-control study covering 626 lung cancer patients and 626 controls recruited in Asturias and matched by ethnicity, hospital, age, and sex. Distances from the respective participants' residential locations to industrial facilities and city centers were computed. Using logistic regression, odds ratios (ORs) and 95% confidence intervals (95%CIs) for categories of distance to urban and industrial pollution sources were calculated, with adjustment for sex, age, hospital area, tobacco consumption, family history of cancer, and occupation. Whereas individuals living near industries displayed an excess risk of lung cancer (OR = 1.49; 95%CI = 0.93-2.39), which attained statistical significance for small cell carcinomas (OR = 2.23; 95%CI = 1.01-4.92), residents in urban areas showed a statistically significant increased risk for adenocarcinoma (OR = 1.92; 95%CI = 1.09-3.38). In the Gijon health area, residents in the urban area registered a statistically significant increased risk of lung cancer (OR = 2.17; 95%CI = 1.25-3.76), whereas in the Aviles health area, no differences in risk were found by area of exposure. This study provides further evidence that air pollution is a moderate risk factor for lung cancer.

Lung cancer risk and pollution in an industrial region of Northern Spain: a hospital-based case-control study

PubMed Central

2011-01-01

Background Asturias, an Autonomous Region in Northern Spain with a large industrial area, registers high lung cancer incidence and mortality. While this excess risk of lung cancer might be partially attributable to smoking habit and occupational exposure, the role of industrial and urban pollution also needs to be assessed. The objective was to ascertain the possible effect of air pollution, both urban and industrial, on lung cancer risk in Asturias. Methods This was a hospital-based case-control study covering 626 lung cancer patients and 626 controls recruited in Asturias and matched by ethnicity, hospital, age, and sex. Distances from the respective participants' residential locations to industrial facilities and city centers were computed. Using logistic regression, odds ratios (ORs) and 95% confidence intervals (95%CIs) for categories of distance to urban and industrial pollution sources were calculated, with adjustment for sex, age, hospital area, tobacco consumption, family history of cancer, and occupation. Results Whereas individuals living near industries displayed an excess risk of lung cancer (OR = 1.49; 95%CI = 0.93-2.39), which attained statistical significance for small cell carcinomas (OR = 2.23; 95%CI = 1.01-4.92), residents in urban areas showed a statistically significant increased risk for adenocarcinoma (OR = 1.92; 95%CI = 1.09-3.38). In the Gijon health area, residents in the urban area registered a statistically significant increased risk of lung cancer (OR = 2.17; 95%CI = 1.25-3.76), whereas in the Aviles health area, no differences in risk were found by area of exposure. Conclusions This study provides further evidence that air pollution is a moderate risk factor for lung cancer. PMID:21266041

The toxic release inventory: fact or fiction? A case study of the primary aluminum industry.

PubMed

Koehler, Dinah A; Spengler, John D

2007-10-01

Since 1989 manufacturing facilities across the USA must report toxic chemical emissions to the EPA's toxic release inventory (TRI). Public release of this information and increased public scrutiny are believed to significantly contribute to the over 45% reduction in toxic chemical releases since inception of the program and to growing support for this type of informational regulation instead of traditional command-and-control. However, prior research indicates a tendency to under-report emissions. We find specific evidence of under-reporting of polycyclic aromatic hydrocarbons (PAH) to the TRI by primary aluminum facilities after promulgation of the industry's maximum available control technology (MACT) standard in 1997. We also find evidence of dislocation of emission overseas due to these regulatory requirements. Additionally, changes in energy prices affected aluminum production and further distort reported PAH emissions levels. This suggests the possibility of more widespread under-reporting that is modulated by various factors, including market conditions and new regulations, and which may partially explain the downward trend in TRI emissions. It also suggests that the quality of TRI data may improve once facilities are subject to monitoring of emissions of a TRI listed pollutant due to command-and-control regulation.

Reinforced Plastic Composites Production: National Emission Standards for Hazardous Air Pollutants

EPA Pesticide Factsheets

National emissions standards for hazardous air pollutants for reinforced plastic composites production facilities. Regulates production and ancillary processes used to manufacture products with thermoset resins and gel coats.

33 CFR 154.1240 - Specific requirements for animal fats and vegetable oils facilities that could reasonably be...

Code of Federal Regulations, 2011 CFR

2011-07-01

... fats and vegetable oils facilities that could reasonably be expected to cause substantial harm to the... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities § 154.1240 Specific requirements for animal fats and vegetable...

EPA Activities for Cleaner Air

EPA Pesticide Factsheets

Activities in San Joaquin Valley to reduce air pollution, meet federal health standards for ozone and particulates, fund clean tech and health research, and enforce compliance with facility-specific operating permits for industrial air pollution sources.

Modeling Ballasted Tracks for Pollutants

DOT National Transportation Integrated Search

2012-08-01

In this study, the Regional Transportation Districts (RTDs) light rail operations were examined for pollutant production and runoff. To : accomplish this, a laboratory study utilizing a rainfall-runoff facility was conducted. Input to this labo...

Region 9 NPDES Facilities - Waste Water Treatment Plants

EPA Pesticide Factsheets

Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA permit program that regulates direct discharges from facilities that discharge treated waste water into waters of the US. Facilities are issued NPDES permits regulating their discharge as required by the Clean Water Act. A facility may have one or more outfalls (dischargers). The location represents the facility or operating plant.

Resident's concerns and attitudes towards Solid Waste Management facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rahardyan, B.; Matsuto, T.; Kakuta, Y.

2004-07-01

Because of limited space, the siting and construction of a new SWM facility is a big challenge in Japan. An SWM facility should be socially accepted as well as environmentally and economically sound. This study aimed to investigate people's concerns about SWM facilities and their attitudes towards such facilities. A questionnaire was designed based on literature reviews and was sent to residents in three municipalities with different backgrounds. The questions covered concerns on the impact of an SWM facility, management aspects, unfairness of facility siting, and attitudes to facility construction. Of the many concerns, 'pollution and health effect' had themore » highest rating, followed by 'reliability', 'damage to nature' and 'cost'. The rating was different between municipalities, reflecting their geographic and social backgrounds. Using factor analysis, correlations among concerns were analyzed, and five principal components were extracted, namely 'pollution', 'nuisance', 'facility management', 'planning of facility', and 'merit/demerit'. Although obvious correlations were not found between individual items of concern and attitudes to construction of a facility, the discriminant analysis indicated dominant concerns of attitudes, but the disagreement between actual impact and citizens were found. As for attributes, the 'opposed' attitude decreased for residents who had visited an SWM facility, even if they had only seen it from outside.« less

Environmental Health Practice: Statistically Based Performance Measurement

PubMed Central

Enander, Richard T.; Gagnon, Ronald N.; Hanumara, R. Choudary; Park, Eugene; Armstrong, Thomas; Gute, David M.

2007-01-01

Objectives. State environmental and health protection agencies have traditionally relied on a facility-by-facility inspection-enforcement paradigm to achieve compliance with government regulations. We evaluated the effectiveness of a new approach that uses a self-certification random sampling design. Methods. Comprehensive environmental and occupational health data from a 3-year statewide industry self-certification initiative were collected from representative automotive refinishing facilities located in Rhode Island. Statistical comparisons between baseline and postintervention data facilitated a quantitative evaluation of statewide performance. Results. The analysis of field data collected from 82 randomly selected automotive refinishing facilities showed statistically significant improvements (P<.05, Fisher exact test) in 4 major performance categories: occupational health and safety, air pollution control, hazardous waste management, and wastewater discharge. Statistical significance was also shown when a modified Bonferroni adjustment for multiple comparisons was performed. Conclusions. Our findings suggest that the new self-certification approach to environmental and worker protection is effective and can be used as an adjunct to further enhance state and federal enforcement programs. PMID:17267709

33 CFR 154.1325 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2011 CFR

2011-07-01

... evaluation criteria for facilities that handle, store, or transport other non-petroleum oils. 154.1325...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Other Non-Petroleum..., store, or transport other non-petroleum oils. (a) An owner or operator of a facility that handles...

33 CFR 154.1325 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2010 CFR

2010-07-01

... evaluation criteria for facilities that handle, store, or transport other non-petroleum oils. 154.1325...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Other Non-Petroleum..., store, or transport other non-petroleum oils. (a) An owner or operator of a facility that handles...

33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

EPA Facility Registry Service (FRS): PCS_NPDES

EPA Pesticide Factsheets

This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link to the Permit Compliance System (PCS) or the National Pollutant Discharge Elimination System (NPDES) module of the Integrated Compliance Information System (ICIS). PCS tracks NPDES surface water permits issued under the Clean Water Act. This system is being incrementally replaced by the NPDES module of ICIS. Under NPDES, all facilities that discharge pollutants from any point source into waters of the United States are required to obtain a permit. The permit will likely contain limits on what can be discharged, impose monitoring and reporting requirements, and include other provisions to ensure that the discharge does not adversely affect water quality. FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to NPDES facilities once the PCS or ICIS-NPDES data has been integrated into the FRS database. Additional information on FRS is available

H.R. 1002: A Bill to amend the Oil Pollution Act of 1990 to exempt marinas from the financial responsibility requirements applicable to off shore facilities under the Act. Introduced in the House of Representatives, One Hundred Fourth Congress, First session

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-12-31

This document contains H.R. 1002, A Bill to Amend the Oil Pollution Act of 1990 to exempt marinas from the financial responsibility requirements applicable to offshore facilities under that Act. This Bill was introduced in the House of Representatives, 104th Congress, First Session, February 21, 1995.

33 CFR 154.1220 - Response plan submission requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities § 154.1220 Response plan submission requirements. (a) The owner...

33 CFR 154.1220 - Response plan submission requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SECURITY (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities § 154.1220 Response plan submission requirements. (a) The owner...

Towards participatory air pollution exposure assessment in a goods movement community

Treesearch

Michelle C. Kondo; Chris Mizes; John Lee; Jacqueline McGady-Saier; Lisa O' Malley; Ariel Diliberto; Igor Burstyn

2014-01-01

Air pollution from diesel truck traffic travelling to and from port facilities is a major environmental health concern in areas of Philadelphia such as the Port Richmond neighborhood. Ambient monitoring has limited capability to assess neighborhood- or personal-level exposures to this pollution. We sought to conduct a pilot study using a community-based participatory...

Portable air pollution control equipment for the control of toxic particulate emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chaurushia, A.; Odabashian, S.; Busch, E.

1997-12-31

Chromium VI (Cr VI) has been identified by the environmental regulatory agencies as a potent carcinogen among eleven heavy metals. A threshold level of 0.0001 lb/year for Cr VI emissions has been established by the California Air Resources Board for reporting under Assembly Bill 2588. A need for an innovative control technology to reduce fugitive emissions of Cr VI was identified during the Air Toxic Emissions Reduction Program at Northrop Grumman Military Aircraft Systems Division (NGMASD). NGMASD operates an aircraft assembly facility in El Segundo, CA. Nearly all of the aircraft components are coated with a protective coating (primer) priormore » to assembly. The primer has Cr VI as a component for its excellent corrosion resistance property. The complex assembly process requires fasteners which also need primer coating. Therefore, NGMASD utilizes High Volume Low Pressure (HVLP) guns for the touch-up spray coating operations. During the touch-up spray coating operations, Cr VI particles are atomized and transferred to the aircraft surface. The South Coast Air Quality Management District (SCAQMD) has determined that the HVLP gun transfers 65% of the paint particles onto the substrate and the remaining 35% are emitted as an overspray if air pollution controls are not applied. NGMASD has developed the Portable Air Pollution Control Equipment (PAPCE) to capture and control the overspray in order to reduce fugitive Cr VI emissions from the touch-up spray coating operations. A source test was performed per SCAQMD guidelines and the final report has been approved by the SCAQMD.« less

Region 9 NPDES Facilities 2012- Waste Water Treatment Plants

EPA Pesticide Factsheets

Point geospatial dataset representing locations of NPDES Waste Water Treatment Plant Facilities. NPDES (National Pollution Discharge Elimination System) is an EPA permit program that regulates direct discharges from facilities that discharge treated waste water into waters of the US. Facilities are issued NPDES permits regulating their discharge as required by the Clean Water Act. A facility may have one or more outfalls (dischargers). The location represents the facility or operating plant.

40 CFR 112.21 - Facility response training and drills/exercises.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Facility response training and drills/exercises. 112.21 Section 112.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION Response Requirements § 112.21 Facility response training and drills...

40 CFR 112.21 - Facility response training and drills/exercises.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Facility response training and drills/exercises. 112.21 Section 112.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION Response Requirements § 112.21 Facility response training and drills...

40 CFR 112.21 - Facility response training and drills/exercises.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 23 2013-07-01 2013-07-01 false Facility response training and drills/exercises. 112.21 Section 112.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION Response Requirements § 112.21 Facility response training and drills...

40 CFR 112.21 - Facility response training and drills/exercises.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Facility response training and drills/exercises. 112.21 Section 112.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION Response Requirements § 112.21 Facility response training and drills...

40 CFR 112.21 - Facility response training and drills/exercises.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Facility response training and drills/exercises. 112.21 Section 112.21 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION Response Requirements § 112.21 Facility response training and drills...

33 CFR 154.1210 - Purpose and applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities § 154.1210 Purpose and applicability. (a) The requirements of this... fats or vegetable oils including— (1) A fixed MTR facility capable of transferring oil in bulk, to or...

33 CFR 154.1210 - Purpose and applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities § 154.1210 Purpose and applicability. (a) The requirements of this... fats or vegetable oils including— (1) A fixed MTR facility capable of transferring oil in bulk, to or...

REDUCING EMISSIONS IN FIBERGLASS REINFORCED PLASTICS MANUFACTURING

EPA Science Inventory

The paper summarizes results of an evaluation of pollution prevention techniques, so that technical assistance providers can provide better information to fiber-reinforced plastics and composites (FRP/C) facilities about pollution prevention options. It gives background about the...

40 CFR 63.9545 - What records must I keep?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 63.9545 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities...

Facility Response Planning: Compliance Assistance Guide

EPA Pesticide Factsheets

This guide was developed in order to help owners and operators of facilities that store or use oil, as well as other interested people, to better understand the Federal Oil Pollution Prevention regulation.

Microplastic pollution is widely detected in US municipal wastewater treatment plant effluent.

PubMed

Mason, Sherri A; Garneau, Danielle; Sutton, Rebecca; Chu, Yvonne; Ehmann, Karyn; Barnes, Jason; Fink, Parker; Papazissimos, Daniel; Rogers, Darrin L

2016-11-01

Municipal wastewater effluent has been proposed as one pathway for microplastics to enter the aquatic environment. Here we present a broad study of municipal wastewater treatment plant effluent as a pathway for microplastic pollution to enter receiving waters. A total of 90 samples were analyzed from 17 different facilities across the United States. Averaging all facilities and sampling dates, 0.05 ± 0.024 microparticles were found per liter of effluent. Though a small value on a per liter basis, even minor municipal wastewater treatment facilities process millions of liters of wastewater each day, yielding daily discharges that ranged from ∼50,000 up to nearly 15 million particles. Averaging across the 17 facilities tested, our results indicate that wastewater treatment facilities are releasing over 4 million microparticles per facility per day. Fibers and fragments were found to be the most common type of particle within the effluent; however, some fibers may be derived from non-plastic sources. Considerable inter- and intra-facility variation in discharge concentrations, as well as the relative proportions of particle types, was observed. Statistical analysis suggested facilities serving larger populations discharged more particles. Results did not suggest tertiary filtration treatments were an effective means of reducing discharge. Assuming that fragments and pellets found in the effluent arise from the 'microbeads' found in many cosmetics and personal care products, it is estimated that between 3 and 23 billion (with an average of 13 billion) of these microplastic particles are being released into US waterways every day via municipal wastewater. This estimate can be used to evaluate the contribution of microbeads to microplastic pollution relative to other sources (e.g., plastic litter and debris) and pathways (e.g., stormwater) of discharge. Published by Elsevier Ltd.

Improving water quality through California's Clean Beach Initiative: an assessment of 17 projects.

PubMed

Dorsey, John H

2010-07-01

California's Clean Beach Initiative (CBI) funds projects to reduce loads of fecal indicator bacteria (FIB) impacting beaches, thus providing an opportunity to judge the effectiveness of various CBI water pollution control strategies. Seventeen initial projects were selected for assessment to determine their effectiveness on reducing FIB in the receiving waters along beaches nearest to the projects. Control strategies included low-flow diversions, sterilization facilities, sewer improvements, pier best management practices (BMPs), vegetative swales, and enclosed beach BMPs. Assessments were based on statistical changes in pre- and postproject mean densities of FIB at shoreline monitoring stations targeted by the projects. Most low-flow diversions and the wetland swale project were effective in removing all contaminated runoff from beaches. UV sterilization was effective when coupled with pretreatment filtration and where effluent was released within a few hundred meters of the beach to avoid FIB regrowth. Other BMPs were less effective because they treated only a portion of contaminant sources impacting their target beach. These findings should be useful to other coastal states and agencies faced with similar pollution control problems.

Stormwater Pollution Prevention Plan - TA-60 Material Recycling Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandoval, Leonard Frank

This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA- 60 Material Recycling Facility at Los Alamos National Laboratory. Los Alamosmore » National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60 Material Recycling Facility. The current permit expires at midnight on June 4, 2020.« less

Economic considerations in coverting from oil/gas firing to coal

NASA Technical Reports Server (NTRS)

Rau, J. G.

1978-01-01

Economic considerations involved in fuel conversion such as from oil and/or gas firing to coal are discussed including investments costs for new facilities and equipment (including air pollution control equipment), operation and maintenance costs, and purchased fuel costs. An analytical approach to assessing the cost effectiveness of fuel conversion in terms of the annual net cost of conversion, the equivalent annual number of barrels of oil saved, and the integral rate of return of the conversion investment is presented. Illustrative numerical examples are presented for typical utility boilers and industrial boiler facilities. A further consideration addressed deals with the impacts of these costs on the overall financial structure of the firm and the ability of the firm to raise the necessary investment captial.

76 FR 20850 - Approval and Promulgation of Air Quality Implementation Plans; Indiana; Stage I Vapor Recovery Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... gasoline dispensing facilities more stringent by applying them statewide, making the rule applicable to... Emissions Standards for Hazardous Air Pollutants (NESHAPs) for gasoline dispensing facilities. The revisions... January 10, 2008, EPA issued new, more stringent National Regulations for Gasoline Dispensing Facilities...

40 CFR 63.9485 - Am I subject to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities... you own or operate a friction materials manufacturing facility (as defined in § 63.9565) that is (or... that applies to you, as specified in § 63.9495. Your friction materials manufacturing facility is a...

40 CFR 63.9485 - Am I subject to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities... you own or operate a friction materials manufacturing facility (as defined in § 63.9565) that is (or... that applies to you, as specified in § 63.9495. Your friction materials manufacturing facility is a...

40 CFR 63.9485 - Am I subject to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities... you own or operate a friction materials manufacturing facility (as defined in § 63.9565) that is (or... that applies to you, as specified in § 63.9495. Your friction materials manufacturing facility is a...

40 CFR 63.9485 - Am I subject to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities... you own or operate a friction materials manufacturing facility (as defined in § 63.9565) that is (or... that applies to you, as specified in § 63.9495. Your friction materials manufacturing facility is a...

40 CFR 63.9485 - Am I subject to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) National Emission Standards for Hazardous Air Pollutants for Friction Materials Manufacturing Facilities... you own or operate a friction materials manufacturing facility (as defined in § 63.9565) that is (or... that applies to you, as specified in § 63.9495. Your friction materials manufacturing facility is a...

Fact Sheet for Friction Materials Manufacturing Facilities Residual Risk and Technology Review

EPA Pesticide Factsheets

proposed amendments to the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Friction Materials Manufacturing Facilities to address the results of the residual risk and technology review

TRI National Analysis

EPA Pesticide Factsheets

Interpretation of annual TRI data reported by industrial facilities. Interactive maps and other tools give a close look at how industries, parent companies, and individual facilities manage toxic chemical waste and how they prevent and reduce pollution.

Twenty-five years of ecological recovery of East Fork Poplar Creek: review of environmental problems and remedial actions.

PubMed

Loar, James M; Stewart, Arthur J; Smith, John G

2011-06-01

In May 1985, a National Pollutant Discharge Elimination System permit was issued for the Department of Energy's Y-12 National Security Complex (Y-12 Complex) in Oak Ridge, Tennessee, USA, allowing discharge of effluents to East Fork Poplar Creek (EFPC). The effluents ranged from large volumes of chlorinated once-through cooling water and cooling tower blow-down to smaller discharges of treated and untreated process wastewaters, which contained a mixture of heavy metals, organics, and nutrients, especially nitrates. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to meet two major objectives: demonstrate that the established effluent limitations were protecting the classified uses of EFPC, and document the ecological effects resulting from implementing a Water Pollution Control Program at the Y-12 Complex. The second objective is the primary focus of the other papers in this special series. This paper provides a history of pollution and the remedial actions that were implemented; describes the geographic setting of the study area; and characterizes the physicochemical attributes of the sampling sites, including changes in stream flow and temperature that occurred during implementation of the BMAP. Most of the actions taken under the Water Pollution Control Program were completed between 1986 and 1998, with as many as four years elapsing between some of the most significant actions. The Water Pollution Control Program included constructing nine new wastewater treatment facilities and implementation of several other pollution-reducing measures, such as a best management practices plan; area-source pollution control management; and various spill-prevention projects. Many of the major actions had readily discernable effects on the chemical and physical conditions of EFPC. As controls on effluents entering the stream were implemented, pollutant concentrations generally declined and, at least initially, the volume of water discharged from the Y-12 Complex declined. This reduction in discharge was of ecological concern and led to implementation of a flow management program for EFPC. Implementing flow management, in turn, led to substantial changes in chemical and physical conditions of the stream: stream discharge nearly doubled and stream temperatures decreased, becoming more similar to those in reference streams. While water quality clearly improved, meeting water quality standards alone does not guarantee protection of a waterbody's biological integrity. Results from studies on the ecological changes stemming from pollution-reduction actions, such as those presented in this series, also are needed to understand how best to restore or protect biological integrity and enhance ecological recovery in stream ecosystems. With a better knowledge of the ecological consequences of their decisions, environmental managers can better evaluate alternative actions and more accurately predict their effects.

Twenty-Five Years of Ecological Recovery of East Fork Poplar Creek: Review of Environmental Problems and Remedial Actions

NASA Astrophysics Data System (ADS)

Loar, James M.; Stewart, Arthur J.; Smith, John G.

2011-06-01

In May 1985, a National Pollutant Discharge Elimination System permit was issued for the Department of Energy's Y-12 National Security Complex (Y-12 Complex) in Oak Ridge, Tennessee, USA, allowing discharge of effluents to East Fork Poplar Creek (EFPC). The effluents ranged from large volumes of chlorinated once-through cooling water and cooling tower blow-down to smaller discharges of treated and untreated process wastewaters, which contained a mixture of heavy metals, organics, and nutrients, especially nitrates. As a condition of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed to meet two major objectives: demonstrate that the established effluent limitations were protecting the classified uses of EFPC, and document the ecological effects resulting from implementing a Water Pollution Control Program at the Y-12 Complex. The second objective is the primary focus of the other papers in this special series. This paper provides a history of pollution and the remedial actions that were implemented; describes the geographic setting of the study area; and characterizes the physicochemical attributes of the sampling sites, including changes in stream flow and temperature that occurred during implementation of the BMAP. Most of the actions taken under the Water Pollution Control Program were completed between 1986 and 1998, with as many as four years elapsing between some of the most significant actions. The Water Pollution Control Program included constructing nine new wastewater treatment facilities and implementation of several other pollution-reducing measures, such as a best management practices plan; area-source pollution control management; and various spill-prevention projects. Many of the major actions had readily discernable effects on the chemical and physical conditions of EFPC. As controls on effluents entering the stream were implemented, pollutant concentrations generally declined and, at least initially, the volume of water discharged from the Y-12 Complex declined. This reduction in discharge was of ecological concern and led to implementation of a flow management program for EFPC. Implementing flow management, in turn, led to substantial changes in chemical and physical conditions of the stream: stream discharge nearly doubled and stream temperatures decreased, becoming more similar to those in reference streams. While water quality clearly improved, meeting water quality standards alone does not guarantee protection of a waterbody's biological integrity. Results from studies on the ecological changes stemming from pollution-reduction actions, such as those presented in this series, also are needed to understand how best to restore or protect biological integrity and enhance ecological recovery in stream ecosystems. With a better knowledge of the ecological consequences of their decisions, environmental managers can better evaluate alternative actions and more accurately predict their effects.

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - GEOCHEMISTRY LABORATORY AT SANDIA NATIONAL LABORATORIES

EPA Science Inventory

These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

Uncertainties of stormwater characteristics and removal rates of stormwater treatment facilities: implications for stormwater handling.

PubMed

Langeveld, J G; Liefting, H J; Boogaard, F C

2012-12-15

Stormwater runoff is a major contributor to the pollution of receiving waters. This study focuses at characterising stormwater in order to be able to determine the impact of stormwater on receiving waters and to be able to select the most appropriate stormwater handling strategy. The stormwater characterisation is based on determining site mean concentrations (SMCs) and their uncertainties as well as the treatability of stormwater by monitoring specific pollutants concentration levels (TSS, COD, BOD, TKN, TP, Pb, Cu, Zn, E.coli) at three full scale stormwater treatment facilities in Arnhem, the Netherlands. This has resulted in 106 storm events being monitored at the lamella settler, 59 at the high rate sand filter and 132 at the soil filter during the 2 year monitoring period. The stormwater characteristics in Arnhem in terms of SMCs for main pollutants TSS and COD and settling velocities differ from international data. This implies that decisions for stormwater handling made on international literature data will very likely be wrong due to assuming too high concentrations of pollutants and misjudgement of the treatability of stormwater. The removal rates monitored at the full scale treatment facilities are within the expected range, with the soil filter and the sand filter having higher removal rates than the lamella settler. The full scale pilots revealed the importance of incorporating gross solids removal in the design of stormwater treatment facilities, as the gross solids determine operation and maintenance requirements. Copyright © 2012 Elsevier Ltd. All rights reserved.

Ship recycling and marine pollution.

PubMed

Chang, Yen-Chiang; Wang, Nannan; Durak, Onur Sabri

2010-09-01

This paper discusses the historical background, structure and enforcement of the '2009 Hong Kong International Convention on the Safe and Environmentally Sound Recycling of Ships.' the 2009 Hong Kong Convention establishes control and enforcement instruments related to ship recycling, determining the control rights of Port States and the obligations of Flag States, Parties and recycling facilities under its jurisdiction. The Convention also controls the communication and exchange of information procedures, establishes a reporting system to be used upon the completion of recycling, and outlines an auditing system for detecting violations. The Convention, however, also contains some deficiencies. This paper concludes these deficiencies will eventually influence the final acceptance of this Convention by the international community. Copyright 2010 Elsevier Ltd. All rights reserved.

Assessment of Near-Source Air Pollution at a Fine Spatial ...

EPA Pesticide Factsheets

Mobile monitoring is an emerging strategy to characterize spatially and temporally variable air pollution in areas near sources. EPA’s Geospatial Monitoring of Air Pollution (GMAP) vehicle – an all-electric vehicle measuring real-time concentrations of particulate and gaseous pollutants – was used to map air pollution levels near the Port of Charleston in South Carolina. High-resolution monitoring was performed along driving routes near several port terminals and rail yard facilities, recording geospatial coordinates and concentrations of pollutants including black carbon, size-resolved particle count ranging from ultrafine to coarse (6 nm to 20 um), carbon monoxide, carbon dioxide, and nitrogen dioxide. Additionally, a portable meteorological station was used to characterize local conditions. The primary objective of this work is to characterize the impact of port facilities on local scale air quality. It is found that elevated concentration measurements of Black Carbon and PM correlate to periods of increased port activity and a significant elevation in concentration is observed downwind of ports. However, limitations in study design prevent a more complete analysis of the port effect. As such, we discuss the ways in which this study is limited and how future work could be improved. Mobile monitoring is an emerging strategy to characterize spatially and temporally variable air pollution in areas near sources. EPA’s Geospatial Monitoring of Air Pollut

Assessing community exposure to hazardous air pollutants by combining optical remote sensing and "low-cost" sensor technologies

NASA Astrophysics Data System (ADS)

Pikelnaya, O.; Polidori, A.; Wimmer, R.; Mellqvist, J.; Samuelsson, J.; Marianne, E.; Andersson, P.; Brohede, S.; Izos, O.

2017-12-01

Industrial facilities such as refineries and oil processing facilities can be sources of chemicals adversely affecting human health, for example aromatic hydrocarbons and formaldehyde. In an urban setting, such as the South Coast Air Basin (SCAB), exposure to harmful air pollutants (HAP's) for residents of communities neighboring such facilities is of serious concern. Traditionally, exposure assessments are performed by modeling a community exposure using emission inventories and data collected at fixed air monitoring sites. However, recent field measurements found that emission inventories may underestimate HAP emissions from refineries; and HAP measurements data from fixed sites is lacking spatial resolution; as a result, the impact of HAP emissions on communities is highly uncertain. The next generation air monitoring technologies can help address these challenges. For example, dense "low-cost" sensors allow continuous monitoring of concentrations of pollutants within communities with high temporal- and spatial- resolution, and optical remote sensing (ORS) technologies offer measurements of emission fluxes and real-time ground-concentration mapping of HAPs. South Coast Air Quality Management District (SCAQMD) is currently conducting a multi-year study using ORS methods and "low-cost" Volatile Organic Compounds (VOCs) sensors to monitor HAP emissions from selected industrial facilities in the SCAB and their ambient concentrations in neighboring communities. For this purpose, quarterly mobile ORS surveys are conducted to quantify facility-wide emissions for VOCs, aromatic hydrocarbons and HCHO, and to collect ground-concentration profiles of these pollutants inside neighboring communities. Additionally, "low-cost" sensor nodes for deployment in neighborhood(s) downwind of the facilities have been developed in order to obtain long-term, granular data on neighborhood VOC concentrations, During this presentation we will discuss initial results of quarterly ORS surveys and pilot "low-cost" sensor deployments. We will also outline benefits of using a combination of mobile ORS surveys and "low-cost" sensor networks for community exposure monitoring.

The Environmental Assessment and Management (TEAM) Guide: West Virginia Supplement

DTIC Science & Technology

2010-01-01

WVCSR 45-21-19) [Citation Revised January 2008]. • Paper Coating Line - a web coating line where coating is applied to paper . Printing presses are...from a ny stack, pi pe, a ir pol lution c ontrol de vice, or f rom a ny ot her equipment or facilities associated with a c hemical processing unit...to, hoods, ducts, fans, booths, ovens, dryers , e tc.) that contains, collects, and transports an air pollutant to a control device (WVCSR 45-21-2.9

Use of Activated Carbon to Control Volatilization of Organic Contaminants from the Indiana Harbor Confined Disposal Facility

DTIC Science & Technology

2012-09-01

PAHs (17 priority pollutant PAHs) were extracted from sediment by USEPA SW-846 Method 3545 and analyzed by gas chromatography /mass spectrometry...slurry at concentrations of 0.025, 0.05, and 0.10 g/L. The carbon- sediment mixture was equilibrated by tumbling in zero headspace jars for 15 minutes...cooled injection gas chromatography injection system at -40 °C. Once the analytes were transferred, the injection port was heated to 240 °C and

Evaluation of Dredged Material Proposed for Disposal at Island, Nearshore, or Upland Confined Disposal Facilities - Testing Manual

DTIC Science & Technology

2003-01-01

disposal in the ocean is regulated under the Marine Protection, Research and Sanctuaries Act (MPRSA), commonly referred to as the Ocean Dumping Act. The...Federal Water Pollution Control Act (33 U.S.C. 1344) or Section 103 of the Marine Protection, Research, and Sanctuaries Act of 1972 (33 U.S.C. 1413... abiotic resources such as water quality, groundwater quality, and air quality as well as the more commonly thought of biotic resources such as

Environmental health monograph

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1974-05-01

Current environmental programs intended to reduce or mediate environmental health hazards in Berkeley, Charleston, and Dorchester Counties, South Carolina, are described. The following areas are considered: air pollution, noise abatement, pesticide control, accident prevention, food and milk sanitation, occupational health housing, water supply, sewerage, industrial waste, solid waste disposal, and vector control. The lack of adequate technically trained manpower or funds to implement minimum codes currently in force in the Trident Region is noted. The wide range of public and private agencies concerned with environmental health issues creates complexities in dealing with these issues. Conflicting codes and standards exist atmore » various government levels. The Trident Health District Office Air Pollution Control Program provides the following: ambient air quality surveillance; review of plans and specifications for proposed air pollution control facilities and equipment; and air monitoring. A list of safety - related courses offered by the Greater Charleston Safety Council is provided. A lack of readily available statistics concerning the various kinds of accidents and the frequency of their occurrence is noted. Concern is also expressed over the lack of personnel to inspect the growing food service industry. Local activities in the area of occupational health are reported to be less than minimal. The Charleston County Health Department has recently introduced a rural sanitation program. The county also issues permits for septic tank installation. The Regional Planning Council for the area aids municipalities and counties in planning for and implementing supply control and solid waste management in compliance with Federal and State laws. Mosquito abatement, rabies control, and rodent control activities in the area are described. Portions of this document are not fully legible. (GRA)« less

NPDES Permit for Keller Transport, Inc. Groundwater Remediation Treatment Facility in Montana

EPA Pesticide Factsheets

Under National Pollutant Discharge Elimination System permit number MT0030805, Keller Transport, Inc. is authorized to discharge from its groundwater remediation treatment facility in Lake County, Montana, to Flathead Lake.

New Ways to Showcase Sustainability in Your 2012 TRI Report

EPA Pesticide Factsheets

Slides to accompany a presentation for TRI facilities about improvements to the TRI-MEweb reporting application that make it easier to submit pollution prevention information, and why this is beneficial to facilities.

NPDES Permit for Soap Creek Associates Wastewater Treatment Facility in Montana

EPA Pesticide Factsheets

Under National Pollutant Discharge Elimination System permit number MT-0023183, Soap Creek Associates, Inc. is authorized to discharge from its wastewater treatment facility located in West, Bighorn County, Montana, to Soap Creek.

76 FR 20910 - Proposed Approval of Air Quality Implementation Plans; Indiana; Stage I Vapor Recovery Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... gasoline dispensing facilities more stringent by applying them statewide, making the rule applicable to... Emissions Standards for Hazardous Air Pollutants for gasoline dispensing facilities. The revisions also...

Water quality facility investigation : summary report.

DOT National Transportation Integrated Search

2006-12-01

The genesis for this research project was a desire to comply with the National Pollutant Discharge Elimination : System (NPDES) as cost effectively as possible. The construction of stormwater handling and treatment facilities is : costly because of t...

Aerospace Manufacturing and Rework Facilities: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

Find regulatory information regarding the NESHAP for Aerospace manufacturing and rework facilities. This page contains the rule summary, rule history, and related rules and additional resources for this standard.

NPDES Permit for City of Polson Wastewater Treatment Facility in Montana

EPA Pesticide Factsheets

Under National Pollutant Discharge Elimination System permit number MT-0020559, the City of Polson is authorized to discharge from its wastewater treatment facility located in Lake County, Montana to the Flathead River.

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR 63.8680 - What is the purpose of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Asphalt Processing and Asphalt Roofing... national emission standards for hazardous air pollutants (NESHAP) for existing and new asphalt processing and asphalt roofing manufacturing facilities. This subpart also establishes requirements to...

40 CFR Appendix to Subpart Hh of... - Tables

Code of Federal Regulations, 2010 CFR

2010-07-01

...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants From Oil and Natural Gas Production Facilities Pt. 63... (includes benzene in gasoline) 75150 Carbon disulfide 463581 Carbonyl sulfide 100414 Ethyl benzene 107211...

40 CFR Table 1 to Subpart Cccccc... - Applicability Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000 Gallons of Gasoline or More1... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Source Category: Gasoline... Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000...

40 CFR Table 1 to Subpart Cccccc... - Applicability Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000 Gallons of Gasoline or More1... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Source Category: Gasoline... Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000...

40 CFR Table 1 to Subpart Cccccc... - Applicability Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000 Gallons of Gasoline or More1... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Source Category: Gasoline... Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000...

40 CFR Table 1 to Subpart Cccccc... - Applicability Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000 Gallons of Gasoline or More1... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Source Category: Gasoline... Criteria and Management Practices for Gasoline Dispensing Facilities With Monthly Throughput of 100,000...

33 CFR 137.65 - Visual inspections of the facility, the real property on which the facility is located, and...

Code of Federal Regulations, 2011 CFR

2011-07-01

....65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL SPILL LIABILITY: STANDARDS FOR CONDUCTING ALL...

33 CFR 137.65 - Visual inspections of the facility, the real property on which the facility is located, and...

Code of Federal Regulations, 2014 CFR

2014-07-01

....65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL SPILL LIABILITY: STANDARDS FOR CONDUCTING ALL...

33 CFR 137.65 - Visual inspections of the facility, the real property on which the facility is located, and...

Code of Federal Regulations, 2012 CFR

2012-07-01

....65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL SPILL LIABILITY: STANDARDS FOR CONDUCTING ALL...

33 CFR 137.65 - Visual inspections of the facility, the real property on which the facility is located, and...

Code of Federal Regulations, 2013 CFR

2013-07-01

....65 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL SPILL LIABILITY: STANDARDS FOR CONDUCTING ALL...

Ethylene Oxide Emissions Standards for Sterilization Facilities: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

Learn about the NESHAP for ethylene oxide emissions for sterilization facilities. Find the rule history information, federal register citations, legal authority, and related rules as well as a rule summary.

30 CFR 253.1 - What is the purpose of this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... THE INTERIOR OFFSHORE OIL SPILL FINANCIAL RESPONSIBILITY FOR OFFSHORE FACILITIES General § 253.1 What... covered offshore facilities (COFs) under Title I of the Oil Pollution Act of 1990 (OPA), as amended, 33 U...

The Relationship Analysis between Motorcycle Emission and Road Facilities under Heterogeneous Traffic Situation

NASA Astrophysics Data System (ADS)

Ramli, M. I.; Hanami, Z. A.; Aly, S. H.; Pasra, M.; Hustim, M.

2018-04-01

Motor vehicles have long been a source of pollution in many major cities in the world, including Indonesia. The increasing of the motor vehicle on the road leads to the rising of air pollution that exhausted by the vehicles as consequently. This research is intended to analyze the relationship between motorcycle emission and road facilities for each kind of road facilities in four different arterial road types. This study is quantitative research in which data collection is done directly in 4 types of road such as 2/1 UD, 4/1 UD, 4/2 D, and 6/2 UD in Makassar using motorcycle the Gas Analyzer Portable Measurement System and GPS emission test for speed tracking. The results are the emission tend to increase in road facilities where JS3TB (unsignalized junction) has the highest amount of CO and CO2 emission compared to other types.

Houston’s Novel Strategy to Control Hazardous Air Pollutants: A Case Study in Policy Innovation and Political Stalemate

PubMed Central

Sexton, Ken; Linder, Stephen H

2015-01-01

Although ambient concentrations have declined steadily over the past 30 years, Houston has recorded some of the highest levels of hazardous air pollutants in the United States. Nevertheless, federal and state regulatory efforts historically have emphasized compliance with the National Ambient Air Quality Standard for ozone, treating “air toxics” in Houston as a residual problem to be solved through application of technology-based standards. Between 2004 and 2009, Mayor Bill White and his administration challenged the well-established hierarchy of air quality management spelled out in the Clean Air Act, whereby federal and state authorities are assigned primacy over local municipalities for the purpose of designing and implementing air pollution control strategies. The White Administration believed that existing regulations were not sufficient to protect the health of Houstonians and took a diversity of both collaborative and combative policy actions to mitigate air toxic emissions from stationary sources. Opposition was substantial from a local coalition of entrenched interests satisfied with the status quo, which hindered the city’s attempts to take unilateral policy actions. In the short term, the White Administration successfully raised the profile of the air toxics issue, pushed federal and state regulators to pay more attention, and induced a few polluting facilities to reduce emissions. But since White left office in 2010, air quality management in Houston has returned to the way it was before, and today there is scant evidence that his policies have had any lasting impact. PMID:25698880

The Incidence of Local Water Pollution Abatement Expenditures: A Case Study of the Merrimack River Basin (1974)

EPA Pesticide Factsheets

Part I is an analysis of the determinants of local government expenditures on water pollution abatement facilities. Part II is an investigation of the incidence of costs and benefits of public environmental programs.

Evaluation and implementation of BMPs for NCDOT's highway and industrial facilities : final report, May 2006.

DOT National Transportation Integrated Search

2006-05-01

This research has provided NCDOT with (1) scientific observations to validate the pollutant removal : performance of selected structural BMPs, (2) a database management option for BMP monitoring and : non-monitoring sites, (3) pollution prevention pl...

40 CFR 63.1940 - What is the affected source of this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills What...). The affected source includes the entire disposal facility in a contiguous geographic space where...

40 CFR 63.1940 - What is the affected source of this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills What...). The affected source includes the entire disposal facility in a contiguous geographic space where...

Facilities Potentially Subject to the Secondary Aluminum National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

This document contains a September 2001 list of sources potentially subject to the secondary aluminum production national emission standards for hazardous air pollutants (NESHAP). This list does not include auto salvage i.e. sweat furnaces.

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - MANUFACTURING AND FABRICATION REPAIR LABORATORY AT SANDIA NATIONAL LABORATORIES

EPA Science Inventory

These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

Report: Better Enforcement Oversight Needed for Major Facilities with Water Discharge Permits in Long-Term Significant Noncompliance

EPA Pesticide Factsheets

Report #2007-P-00023, May 14, 2007. EPA did not provide effective enforcement oversight of major facilities with National Pollutant Discharge Elimination System permits in long-term significant noncompliance.

76 FR 39357 - Revisions to the California State Implementation Plan, Imperial County Air Pollution Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-06

... the California State Implementation Plan, Imperial County Air Pollution Control District, Kern County Air Pollution Control District, and Ventura County Air Pollution Control District AGENCY... the Imperial County Air Pollution Control District (ICAPCD), Kern County Air Pollution Control...

A 3-D hydrologic transport model of a water recharge system using carbamazepine and chloride as tracers

NASA Astrophysics Data System (ADS)

Rona, Michael; Gasser, Guy; Negev, Ido; Pankratov, Irena; Elhanany, Sara; Lev, Ovadia; Gvirtzman, Haim

2014-05-01

Wastewater recharge facilities are often used as a final water treatment before the discharge to the sea or before water reclamation. These facilities are often located in active aquifers that supply drinking water. Thus, leakage from the water recharge facility and gradual expansion of the underground wastewater plume are of considerable health concern. Hydrological modeling of water recharge systems are widely used as operational and predictive tools. These models rely on distributed water head monitoring and at least one chemical or physical tracer to model solutes' transport. Refractory micropollutants have proven useful in qualitative identification of pollution leakages and for quantification of pollution to a specific site near water recharge facilities. However, their usefulness as tracers for hydrological modeling is still questionable. In this article, we describe a long term, 3-D hydraulic model of a large-scale wastewater effluents recharge system in which a combination of chloride and a refractory micropollutant, carbamazepine is used to trace the solute transport. The combination of the two tracers provides the model with the benefits of the high specificity of the carbamazepine and the extensive historic data base that is available for chloride. The model predicts westward expansion of the pollution plume, whereas a standing front is formed at the east. These trends can be confirmed by the time trace of the carbamazepine concentrations at specific locations. We show that the combination of two tracers accounts better (at least at some locations) for the evolution of the pollution plume than a model based on chloride or carbamazepine alone.

40 CFR 63.1940 - What is the affected source of this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills What This Subpart... source includes the entire disposal facility in a contiguous geographic space where household waste is...

EVALUATION OF A PORTABLE FOURIER TRANSFORM INFRARED GAS ANALYZER FOR MEASUREMENTS OF AIR TOXICS IN POLLUTION PREVENTION RESEARCH

EPA Science Inventory

A portable Fourier transform infrared gas analyzer with a photoacoustic detector performed reliably during pollution prevention research at two industrial facilities. It exhibited good agreement (within approximately 6%) with other analytical instruments (dispersive infrared and ...

40 CFR 63.1650 - Applicability and compliance dates.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission... are major sources or are co-located at major sources of hazardous air pollutant emissions. (b) The following sources at a ferromanganese and silicomanganese production facility are subject to this subpart...

40 CFR 63.7485 - Am I subject to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) National Emission Standards for Hazardous Air Pollutants for Industrial, Commercial, and Institutional... subject to this subpart if you own or operate an industrial, commercial, or institutional boiler or... Pollutants from Oil and Natural Gas Production Facilities), except as specified in § 63.7491. ...

Case studies in organic contaminant hydrogeology

NASA Astrophysics Data System (ADS)

Baker, John A.

1989-07-01

The effective management of domestic solid waste and hazardous, toxic, and radioactive waste is a major problem in the area of environmental geology and water sciences over the world. This series of case studies of organic contaminants from both solid and hazardous waste disposal facilities provides examples of these problems. The facilities were investigated to determine risks and liabilities before acquisition, to determine the site hydrogeologic conditions for design of appropriate groundwater monitoring plans, and/or to determine the potential for groundwater contamination. The results of these studies and investigations by Waste Management Inc. (WMI) and its consultants have shown certain relationships in the distribution of organic pollutants to the different geologic and hydrogeologic charac teristics of each facility. In each of the case studies, all 129 priority pollutants were analyzed in private wells and/or monitoring wells at the request of regulatory agencies. The 31 volatile organic compounds (VOCs) of the priority pollutant list were the majority of the organic compounds detected and these data are evaluated in each case study. The case studies are on disposal facilities located in glacial tills, carbonaceous weathered clay soils, weathered shale, limestone bedrock, dolomite bedrock, and alluvial and sedimentary deposits. A brief discussion of groundwater quality impacts and remedial measures also is included.

Green and facile fabrication of carbon aerogels from cellulose-based waste newspaper for solving organic pollution.

PubMed

Han, Shenjie; Sun, Qingfeng; Zheng, Huanhuan; Li, Jingpeng; Jin, Chunde

2016-01-20

Carbon-based aerogel fabricated from waste biomass is a potential absorbent material for solving organic pollution. Herein, the lightweight, hydrophobic and porous carbon aerogels (CAs) have been synthesized through freezing-drying and post-pyrolysis by using waste newspaper as the only raw materials. The as-prepared CAs exhibited a low density of 18.5 mg cm(-3) and excellent hydrophobicity with a water contact angle of 132° and selective absorption for organic reagents. The absorption capacity of CA for organic compounds can be 29-51 times its own weight. Moreover, three methods (e.g., squeezing, combustion, and distillation) can be employed to recycle CA and harvest organic pollutants. Combined with waste biomass as raw materials, green and facile fabrication process, excellent hydrophobicity and oleophilicity, CA used as an absorbent material has great potential in application of organic pollutant solvents absorption and environmental protection. Copyright © 2015 Elsevier Ltd. All rights reserved.