Effects of cultivar, fruit number and reflected photosynthetically active radiation on Fragaria x ananassa productivity and fruit ellagic acid and ascorbic acid concentrations.

PubMed

Atkinson, C J; Dodds, P A A; Ford, Y Y; Le Mière, J; Taylor, J M; Blake, P S; Paul, N

2006-03-01

A number of strawberry varieties were surveyed for their total ellagic acid concentration, and attempts were made to determine if ellagic acid and ascorbic acid concentrations of two strawberry cultivars could be increased by polythene reflective mulches. After adjusting crop yields and cultivation using polythene mulches with two different PAR reflective capacities, field- and polytunnel-grown strawberries were analysed for ellagic acid and ascorbic acid concentrations by HPLC. Comparative measurements of yield and fruit quality were determined along with plant developmental changes. Ellagic acid concentration varied widely with strawberry cultivar (60-341 microg g(-1) frozen weight), as did the ratio of conjugated ellagic acid : free ellagic acid. Also, there was significant year-to-year variation in total ellagic acid concentration with some cultivars. Mulches with different reflective capacities impacted on strawberry production; highly reflective mulches significantly increased growth and yield, the latter due to increases in fruit size and number. Highly reflective mulches significantly increased total concentrations of ellagic acid and ascorbic acid relative to control in fruit of different cultivars. The potential of agronomic practices to enhance the concentration and amounts of these important dietary bioactive compounds is discussed.

GAMMA RADIATION OF EYE MEDICAMENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ogg, A.J.

1963-07-13

The use of x rays to sterilize ophthalmological pharmaceutical preparations is described, particularly penicillin and fluorescein drops. The method used with penicillin is to place a tablet (1500 units) in a small vial which is closed with a cork and attached with Sellotape to a 5-ml eye-drop bottle containing 3 ml of normal saline. The bottles were sealed in two polythene envelopes and irradiated at the Wantage Research Lab (AERE) at a dose of 2.5 Mrad. The bags are then stored in a refrigerator at 4 deg C. When required for operation, the outer bag is opened with sterile scissors,more » and the contents tipped onto the surface of the sterile instrument tray. The dropper bulb is filled with saline and introduced into the vial, thereby dissolving the tablet of penicillin. All irradiated preparations were found to be absolutely sterile and fully potent. In the case of fluorescein, 1-in. lengths of gauge 2-intraarterial polythene tubes are filled with the dye from a syringe, and the ends of the tube sealed in a flame. Several hundreds of tubes are irradiated in a single container, and when required, one end of the tube is cut off and a drop squeezed out into the conjunctival sac. (BBB)« less

Solid waste generation and characterization in the University of Lagos for a sustainable waste management.

PubMed

Adeniran, A E; Nubi, A T; Adelopo, A O

2017-09-01

Waste characterization is the first step to any successful waste management policy. In this paper, the characterization and the trend of solid waste generated in University of Lagos, Nigeria was carried out using ASTM D5231-92 and Resource Conservation Reservation Authority RCRA Waste Sampling Draft Technical Guidance methods. The recyclable potential of the waste is very high constituting about 75% of the total waste generated. The estimated average daily solid waste generation in Unilag Akoka campus was estimated to be 32.2tons. The solid waste characterization was found to be: polythene bags 24% (7.73tons/day), paper 15% (4.83tons/day), organic matters 15%, (4.83tons/day), plastic 9% (2.90tons/day), inert materials 8% (2.58tons/day), sanitary 7% (2.25tons/day), textile 7% (2.25tons/day), others 6% (1.93tons/day), leather 4% (1.29tons/day) metals 3% (0.97tons/day), glass 2% (0.64tons/day) and e-waste 0% (0.0tons/day). The volume and distribution of polythene bags generated on campus had a positive significant statistical correlation with the distribution of commercial and academic structures on campus. Waste management options to optimize reuse, recycling and reduce waste generation were discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

The microbiological quality of drinking water sold on the streets in Kumasi, Ghana.

PubMed

Obiri-Danso, K; Okore-Hanson, A; Jones, K

2003-01-01

The aim of this study was to assess the microbiological quality of Ghanaian bottled and plastic-bagged drinking water sold on the streets of Metropolitan Kumasi, Ghana. Eight bottled, 88 factory-filled plastic sachet and 40 hand-filled hand-tied polythene-bagged drinking waters were examined for the presence of heterotrophic bacteria total viable counts (TVCs), indicators of faecal contamination (total coliforms, faecal coliforms and enterococci) and for lead, manganese and iron. Heterotrophic bacteria were found in all three types of water with TVCs per millilitre ranging from 1 to 460 for bottled water, 2-6.33 x 10(5) for factory-bagged sachet water and 2.33 x 10(3)-7.33 x 10(12) for hand-filled hand-tied bagged water. None of the microbial indicators of faecal contamination were detected in bottled water, whereas 4.5% of the factory-bagged sachets contained total coliforms and 2.3% faecal coliforms, and 42.5% of the hand-filled hand-tied bags contained total coliforms, 22.5% faecal coliforms and 5% enterococci. Iron was found in all three types of drinking water but at concentrations well within the WHO recommendations. Lead and manganese were not detected. Ghanaian bottled water is of good microbiological quality but some factory-bagged sachet and hand-filled hand-tied polythene-bagged drinking water are of doubtful quality. Factory-bagged sachets and hand-filled hand-tied bags of drinking water sold in Ghana should be monitored for microbiological contamination, with the aim of raising standards in the industry and re-assuring the public.

Pre-rigor temperature and the relationship between lamb tenderisation, free water production, bound water and dry matter.

PubMed

Devine, Carrick; Wells, Robyn; Lowe, Tim; Waller, John

2014-01-01

The M. longissimus from lambs electrically stimulated at 15 min post-mortem were removed after grading, wrapped in polythene film and held at 4 (n=6), 7 (n=6), 15 (n=6, n=8) and 35°C (n=6), until rigor mortis then aged at 15°C for 0, 4, 24 and 72 h post-rigor. Centrifuged free water increased exponentially, and bound water, dry matter and shear force decreased exponentially over time. Decreases in shear force and increases in free water were closely related (r(2)=0.52) and were unaffected by pre-rigor temperatures. © 2013.

EFFECT OF MODERATE DOSES OF GAMMA RADIATION ON THE KEEPING QUALITY OF BILBERRIES (VACCINIUM MYRTILLUS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horubala, A.; Pijanowski, E.

1961-01-01

Three batches of bilberries (European blueberries) in small polythene bags were treated with various doses of gamma radiation and kept afterwards either at ambient or cool storage temperatures for about 10 to 25 days. The dose of about 0.3 Mrad caused the destruction of somewhat more than 99% of the original microflora (bacteria, yeasts and moulds) and thus increased by 250 to 300% the storage life of berries in comparison with untreated fruit. Losses of anthocyanin pigments, vitamin C, and jellifying power were rather small, and the subsequent changes in flavor were practically non existant. The authors recommend the applicationmore » of moderate doses of gamma -rays (about 0.3 Mrad) to exported bilberries prior to their shipment. (auth)« less

Z dependence of thick-target β-ray backscattering

NASA Astrophysics Data System (ADS)

Sharma, K. K.; Singh, M.

1980-04-01

Variation of β-ray backscattering with the atomic number of target material has been studied using thick targets of polythene, aluminum, iron, copper, zinc, tin, silver, tungsten, and lead for five β emitters, viz., 35S, 147Pm, 204Tl, 32P, and 90Sr-90Y. Effects of geometry and β-ray end-point energy have been investigated using a reflection geometry in which the geometry factors were varied by more than 40 and β-ray energy varied over a range 0.167-2.27 MeV. It is found that the mean value of the index of Z dependence of β-ray backscattering is 1.840.05 over these regions of geometry and energy. Deviations for soft β emitters have been confirmed as due to air absorption. The importance of these results in studies of two-component systems is emphasized.

Microbial degradation of low-density polyethylene (LDPE) by Aspergillus clavatus strain JASK1 isolated from landfill soil.

PubMed

Gajendiran, Anudurga; Krishnamoorthy, Sharmila; Abraham, Jayanthi

2016-06-01

Polythene and plastic waste are found to accumulate in the environment, posing a major ecological threat. They are found to be considered non-degradable, once it enters the environment it has been found to remain there indefinitely. However, significant attention has been placed on biodegradable polymer, identification of microbes with degradative potential on plastic material. The aim of the present investigation was to biodegrade low-density polyethylene (LDPE) using potential fungi isolated from landfill soil. Based on 18S rRNA analyses the isolated strain was identified as Aspergillus clavatus. LDPE degradation by A. clavatus was monitored for 90 days of incubation in aqueous medium. The degradation was confirmed by changes in polyethylene weight, CO 2 evolution by Strum test, infrared spectra and morphological changes by SEM and AFM analysis.

Characterisation, quantity and sorptive properties of microplastics extracted from cosmetics.

PubMed

Napper, Imogen E; Bakir, Adil; Rowland, Steven J; Thompson, Richard C

2015-10-15

Cosmetic products, such as facial scrubs, have been identified as potentially important primary sources of microplastics to the marine environment. This study characterises, quantifies and then investigates the sorptive properties of plastic microbeads that are used as exfoliants in cosmetics. Polyethylene microbeads were extracted from several products, and shown to have a wide size range (mean diameters between 164 and 327 μm). We estimated that between 4594 and 94,500 microbeads could be released in a single use. To examine the potential for microbeads to accumulate and transport chemicals they were exposed to a binary mixture of (3)H-phenanthrene and (14)C-DDT in seawater. The potential for transport of sorbed chemicals by microbeads was broadly similar to that of polythene (PE) particles used in previous sorption studies. In conclusion, cosmetic exfoliants are a potentially important, yet preventable source of microplastic contamination in the marine environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Recent results of the Filippov-type PF experiments at Kurchatov Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krauz, V. I.; Karakin, M. A.; Khautiev, E. Yu.

2006-01-15

The experiments with various plasma-producing substances performed recently were the main content at the PF-3 facility studies: (i) The dependence of the wire array compression on the number of wires was investigated with the deuterium as a filling gas. (ii) The neutron output, 5{center_dot}106 neutrons per shot, was registered in experiments with deuterium-polythene fibers when argon was used as a filling gas. Experimental confirmation of fibers pre-heating by radiation of the current sheath compressed to an axis was obtained. (iii) Studies of interaction of dense high-temperature plasma with the condensed disperse substance (dust) were continued. The dependence of the pinchmore » dynamics on the dust target parameters was investigated. In the shots with dust fraction of the fine-disperse Al2O3 powder, modes with increased pinch MHD-stability are found.« less

Studies on preparation of mixed toffee from guava and strawberry.

PubMed

Chavan, U D; Pawar, U B; Pawar, G H

2015-10-01

The present investigation was carried out to develop a technology for preparation of mixed toffee from guava and strawberry pulp and to study the changes in chemical composition and sensory properties of toffee during storage at ambient temperature as well as refrigerated condition. Preliminary experiments were conducted to find out optimum levels of guava and strawberry pulp. The toffees prepared were wrapped in metallic coated polythene wrapper, packed in 200 gauge polythene bags and stored at ambient (27 ± 2 oC) as well as refrigerated (5 ± 2 oC) condition for 90 days. The stored samples were drawn periodically at 30 days interval for organoleptic and chemical analysis. Preliminary studies were carried out to standardize the optimum levels of guava and strawberry pulp. Among various combinations of guava and strawberry pulp, 70 : 30 w/w (guava : strawberry) ratios toffee was found better than other combinations in respect to organoleptic properties and nutritional quality. The yield of fresh toffee was higher (868 g/kg of pulp) in toffee prepared from 100 % guava (control). The chemical composition indicated that the fresh toffees contained on an average moisture 8.73 %, TSS 83.21 oBrix, titrable acidity 0.3 %, total sugars 73.1 % and ascorbic acid 64.1 mg/100 g. The mean score of fresh toffees for colour and appearance was 8.29, texture 8.02, flavour 8.22, taste 8.32 and overall acceptability 8.16 on 9 point Hedonic scale. The cost of fresh toffee was Rs. 282/kg which was prepared from 70 : 30 guava and strawberry pulp level. The storage studies indicated that the TSS and total sugars increased with the advancement of storage period, while moisture content, ascorbic acid and acidity decreased. The rates of increase or decrease were relatively higher at ambient temperature than refrigerated temperature. The sensory quality of toffees also decreased at faster rate during 90 days storage period at ambient condition than the refrigerated condition. The toffee prepared from 70: 30 guava and strawberry pulp was found superior over other combinations in respect of organoleptic properties throughout storage period. However, toffees were found to be acceptable even after 90 days storage at ambient as well as refrigerated conditions.

A simple technique for transferring excised patches of membrane to different solutions for single channel measurements.

PubMed

Quartararo, N; Barry, P H

1987-12-01

A technical problem associated with the patch clamp technique has been the changing of solutions bathing the membrane patch. The simple technique described here solves this problem by means of a movable polythene sleeve placed on the shaft of the patch clamp pipette. The sleeve is initially placed so that the tip of the pipette is exposed. A gigaohm seal is formed using standard techniques. The patch is then excised and the sleeve is slipped down a few mm past the end of the tip of the pipette. When the pipette and sleeve is now removed from the solution, a small drop of solution covering the membrane patch is held in place at the end of the sleeve by surface tension. The pipette is then easily transferred to a different solution without passing the membrane patch through the air-water interface. The sleeve is then simply pulled back up the pipette shaft to expose the membrane patch to the new solution.

A method and the results of loop colostomy.

PubMed

Browning, G G; Parks, A G

1983-04-01

A technique of loop colostomy which avoids a sutured skin wound, employs a deep tension suture with retained polythene sleeve as a bridge, and permits routine use of standard terminal colostomy appliances is described. The clinical results in 51 patients are reported and the advantages of this method of construction discussed. All patients were able to use standard, terminal colostomy appliances routinely from the time of construction. There were no immediate postoperative complications. Delayed complications occurred in 5 (10 per cent) patients. Intraperitoneal closure was performed in 43 patients and was complicated by 1 (2.3 per cent) transient fecal leak and 4 (9.3 per cent) would infections. The absence of a sutured skin wound, the small bridge size, and the circular shape of the stoma facilitate use of accurately fitting, standard terminal colostomy appliances rather than the usual loop colostomy apparatus. This results in an improved skin seal, reduced fecal leakage, easier nursing and stoma care, and better patient morale.

Efficacy of humidity retention bags for the reduced adsorption and improved cleaning of tissue proteins including prion-associated amyloid to surgical stainless steel surfaces.

PubMed

Secker, T J; Pinchin, H E; Hervé, R C; Keevil, C W

2015-01-01

Increasing drying time adversely affects attachment of tissue proteins and prion-associated amyloid to surgical stainless steel, and reduces the efficacy of commercial cleaning chemistries. This study tested the efficacy of commercial humidity retention bags to reduce biofouling on surgical stainless steel and to improve subsequent cleaning. Surgical stainless steel surfaces were contaminated with ME7-infected brain homogenates and left to dry for 15 to 1,440 min either in air, in dry polythene bags or within humidity retention bags. Residual contamination pre/post cleaning was analysed using Thioflavin T/SYPRO Ruby dual staining and microscope analysis. An increase in biofouling was observed with increased drying time in air or in sealed dry bags. Humidity retention bags kept both protein and prion-associated amyloid minimal across the drying times both pre- and post-cleaning. Therefore, humidity bags demonstrate a cheap, easy to implement solution to improve surgical instrument reprocessing and to potentially reduce associated hospital acquired infections.

Simulated climate change: The interaction between vegetation type and microhabitat temperatures at Ny Alesund, Svalbard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coulson, S.; Hodkinson, I.D.; Stathdee, A.

1993-01-01

Small polythene tents were used to simulate the effects of climate warming on two contrasting vegetation types (polar semi-desert and tundra heath) at Ny Alesund, Spitzbergen, Svalbard. Temperature microclimates are compared within and without tents and between sites with contrasting vegetation types. Summer temperatures were increased by about 5[degrees]C in the vegetation mat and by about 2[degrees]C in the soil at 3 cm depth. Cumulative day degrees above zero were enhanced by around 35% in the vegetation and by around 9% in the soil. Soil temperatures were greatly influenced by the nature of the overlying vegetation, which at one ofmore » the sites appeared to act as an efficient thermal insulator, preventing heat conductance into the soil from above and enhancing thermal contact between the upper soil layer and the cooling permafrost below. The significance of the observed temperature differences for the ecology of the plants and invertebrates is discussed. 21 refs., 3 figs., 2 tabs.« less

Photosynthetic potential and accumulation of assimilates in the developing chloroembryos of Cyamposis tetragonoloba (L. ) Taub

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaladharan, P.; Vivekanandan, M.

1990-02-01

The photosynthetic potential of leaves and chloroembryos of Cyamopsis tetragonoloba (L.) Taub as measured by {sup 14}C-bicarbonate fixation, Hill activity, and in vivo fluorescence transients is compared. On a chlorophyll basis, dark fixation of NaH{sup 14}CO{sub 3} in chloroembryos was 1.5 times higher than that of the leaf, whereas carbon fixation under illumination was threefold higher in the leaf than in the embryos. Rates of O{sub 2} evolution were four times more in embryo than in leaf chloroplasts. Shading of developing fruits on the day of anthesis for 10 days induced a 65% reduction in dry matter accumulation in themore » etiolated embryos, as compared to the normal green embryos of the same fruit half covered by a transparent Polythene sheet. The reduction in dry weight, size of the embryos, and levels of assimilates after shading the developing fruits may be ascribed to partial autotrophy of the chloroembryos.« less

Extension of the shelf life of guava by individual packaging with cling and shrink films.

PubMed

Rana, Seema; Siddiqui, Saleem; Goyal, Ankit

2015-12-01

Guava is a climacteric fruit so physico-chemical changes continuously occur after harvest till fruit become unfit for consumption and suffers from post harvest losses. The main objective of this work was to assess the effectiveness of individual film in form of Shrink and Cling wrap on shelf life of guava. Fruits were individually packed in polythene bags (LDPE) of 200 gauge thickness by Shrink and Cling wrapping and stored at 7 ± 3 °C. Individual wrapping reduced the magnitude of changes during storage i.e., ripening process drastically as evident from lower total soluble solids, higher ascorbic acid, polyphenol content with lower polyphenol oxidase activity and physiological loss of weight (PLW) was less than 3.5 %. Film wrapping preserved freshness of wrapped fruits as they remained acceptable for whole storage time in contrast to control fruits which turned unacceptable by 15(th) day of storage. Control fruits showed significant compositional changes as well as in polyphenol content, ascorbic acid and reduced number of marketable fruits while Cling and Shrink wrapping enhanced the shelf life by 10 days.

Identification of the date-rape drug GHB and its precursor GBL by Raman spectroscopy.

PubMed

Brewster, Victoria L; Edwards, Howell G M; Hargreaves, Michael D; Munshi, Tasnim

2009-01-01

Gamma hydroxybutyric acid (GHB), also known as 'liquid ecstasy', has recently become associated with drug-facilitated sexual assaults, known colloquially as 'date rape', due to the ability of the drug to cause loss of consciousness. The drug is commonly found 'spiked' into alcoholic beverages, as alcohol increases its sedative effects. Gamma hydroxybutyric acid and the corresponding lactone gamma-butyrolactone (GBL) will reach an equilibrium in solution which favours the lactone in basic conditions and GHB in acidic conditions (less than pH 4). Therefore, we have studied both GHB and GBL, as a mildly acidic beverage 'spiked' with GHB will contain both GHB and GBL. We report the analysis of GHB as a sodium salt and GBL, its precursor, using bench-top and portable Raman spectroscopy. It has been demonstrated that we are able to detect GHB and GBL in a variety of containers including colourless and amber glass vials, plastic vials and polythene bags. We have also demonstrated the ability to detect both GBL and GHB in a range of liquid matrices simulating 'spiked' beverages. (c) 2009 John Wiley & Sons, Ltd.

An efficient 14-MeV neutron detector for use in mixed 2. 5- and 14-MeV neutron beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Croft, S.; Bond, D.S.; Hawkes, N.P.

1993-06-01

A neutron detector capable of measuring the time-dependent yield of 14-MeV neutrons from a D--D plasma producing predominantly 2.5-MeV neutrons has been developed. The detector consists of a thick polythene recoil proton radiator backed by a graphite foil attached to a large area totally depleted ion-implanted diode. Protons scattered in the forward direction by 14-MeV neutrons pass through the graphite foil and are registered in the diode. Recoil protons from 2.5-MeV neutrons, however, are prevented from reaching the diode by the foil. When operated with a 1.5-MeV energy bias, the measured neutron detection efficiency for 15-MeV neutrons is 3.2[times]10[sup [minus]3]more » per neutron. The corresponding figure for 3.1-MeV neutrons is a factor of 540 lower. The neutron detector and its laboratory calibration are described, as is its deployment at the Joint European Torus where it serves as a triton burn-up monitor.« less

Description and performance of an updraft trap for sandflies.

PubMed

Mutero, C M; Mutinga, M J; Birley, M H; Amimo, F A; Munyinyi, D M

1991-12-01

An updraft trap for sampling sandflies in the field was developed and tested in the Marigat area of Baringo District, Kenya. The main components of the trap were a 12 cm long plastic drain pipe, 9 V d.c. electric motor, aluminium fan and a perspex sandfly collection cage. Comparisons of the updraft trap with a CDC and a 1 x 1 m polythene sheet coated with castor oil (sticky trap) showed the former was more consistent than the other traps in sampling sandflies from animal burrows. A total of 1241 sandflies belonging to eleven species were collected. Sergentomyia bedfordi, Phlebotomus martini, S. antennatus and P. duboscqi were the commonest species comprising 32.5%, 27.0%, 21.1% and 11.3% of the total catch respectively. However, the relative proportion of the different species varied according to the type of trap used. The CDC trap apparently attracted the known vectors of leishmaniases in the area, P. martini and P. duboscqi. Significantly more male than female P. martini and S. antennatus were collected by the various traps. A significantly higher proportion of female S. bedfordi was captured by the updraft and sticky traps while equal numbers of male and female P. duboscqi were collected in all traps.

Development of colour and firmness in strawberry crops is UV light sensitive, but colour is not a good predictor of several quality parameters.

PubMed

Ordidge, Matthew; García-Macías, Paulina; Battey, Nicholas H; Gordon, Michael H; John, Philip; Lovegrove, Julie A; Vysini, Eleni; Wagstaffe, Alexandra; Hadley, Paul

2012-06-01

Strawberry (Fragaria × ananassa Duchesne var. Elsanta) plants were grown in polytunnels covered with three polythene films that transmitted varying levels of ultraviolet (UV) light. Fruit were harvested under near-commercial conditions and quality and yield were measured. During ripening, changes in the colour parameters of individual fruit were monitored, and the accuracy of using surface colour to predict other quality parameters was determined by analysing the correlation between colour and quality parameters within UV treatments. Higher exposure to UV during growth resulted in the fruit becoming darker at harvest and developing surface colour more quickly; fruit were also firmer at harvest, but shelf life was not consistently affected by the UV regime. Surface colour measurements were poorly correlated to firmness, shelf life or total phenolics, anthocyanins and ellagic acid contents. Although surface colour of strawberry fruits was affected by the UV regime during growth, and this parameter is an important factor in consumer perception, we concluded that the surface colour at the time of harvest was, contrary to consumer expectations, a poor indicator of firmness, potential shelf life or anthocyanin content. Copyright © 2011 Society of Chemical Industry.

A neutron diagnostic for high current deuterium beams.

PubMed

Rebai, M; Cavenago, M; Croci, G; Dalla Palma, M; Gervasini, G; Ghezzi, F; Grosso, G; Murtas, F; Pasqualotto, R; Cippo, E Perelli; Tardocchi, M; Tollin, M; Gorini, G

2012-02-01

A neutron diagnostic for high current deuterium beams is proposed for installation on the spectral shear interferometry for direct electric field reconstruction (SPIDER, Source for Production of Ion of Deuterium Extracted from RF plasma) test beam facility. The proposed detection system is called Close-contact Neutron Emission Surface Mapping (CNESM). The diagnostic aims at providing the map of the neutron emission on the beam dump surface by placing a detector in close contact, right behind the dump. CNESM uses gas electron multiplier detectors equipped with a cathode that also serves as neutron-proton converter foil. The cathode is made of a thin polythene film and an aluminium film; it is designed for detection of neutrons of energy >2.2 MeV with an incidence angle < 45°. CNESM was designed on the basis of simulations of the different steps from the deuteron beam interaction with the beam dump to the neutron detection in the nGEM. Neutron scattering was simulated with the MCNPX code. CNESM on SPIDER is a first step towards the application of this diagnostic technique to the MITICA beam test facility, where it will be used to resolve the horizontal profile of the beam intensity.

Vacuum packing: a model system for laboratory-scale silage fermentations.

PubMed

Johnson, H E; Merry, R J; Davies, D R; Kell, D B; Theodorou, M K; Griffith, G W

2005-01-01

To determine the utility of vacuum-packed polythene bags as a convenient, flexible and cost-effective alternative to fixed volume glass vessels for lab-scale silage studies. Using perennial ryegrass or red clover forage, similar fermentations (as assessed by pH measurement) occurred in glass tube and vacuum-packed silos over a 35-day period. As vacuum-packing devices allow modification of initial packing density, the effect of four different settings (initial packing densities of 0.397, 0.435, 0.492 and 0.534 g cm(-3)) on the silage fermentation over 16 days was examined. Significant differences in pH decline and lactate accumulation were observed at different vacuum settings. Gas accumulation was apparent within all bags and changes in bag volume with time was observed to vary according to initial packing density. Vacuum-packed silos do provide a realistic model system for lab-scale silage fermentations. Use of vacuum-packed silos holds potential for lab-scale evaluations of silage fermentations, allowing higher throughput of samples, more consistent packing as well as the possibility of investigating the effects of different initial packing densities and use of different wrapping materials.

Biodegradation of low-density polyethylene by marine bacteria from pelagic waters, Arabian Sea, India.

PubMed

Harshvardhan, Kumar; Jha, Bhavanath

2013-12-15

Sixty marine bacteria isolated from pelagic waters were screened for their ability to degrade low-density polyethylene; among them, three were positive and able to grow in a medium containing polythene as the sole carbon source. The positive isolates were identified as Kocuria palustris M16, Bacillus pumilus M27 and Bacillus subtilis H1584 based on the 16S rRNA gene sequence homology. The weight loss of polyethylene was 1%, 1.5% and 1.75% after 30 days of incubation with the M16, M27 and H1584 isolates, respectively. The maximum (32%) cell surface hydrophobicity was observed in M16, followed by the H1584 and M27 isolates. The viability of the isolates growing on the polyethylene surface was confirmed using a triphenyltetrazolium chloride reduction test. The viability was also correlated with a concomitant increase in the protein density of the biomass. Polyethylene biodegradation was further confirmed by an increase in the Keto Carbonyl Bond Index, the Ester Carbonyl Bond Index and the Vinyl Bond Index, which were calculated from FT-IR spectra. Copyright © 2013 Elsevier Ltd. All rights reserved.

Foliar nitrogen, phosphorus and potassium content in trees in environmentally toxic plastic industry area.

PubMed

Sett, Rupnarayan; Soni, Bhawna

2013-04-01

In plants, nitrogen deficiency causes stunted growth and chlorosis or yellowing of the leaves due to decreased levels of chlorophyll, while excess nitrogen uptake may cause dark green overly vigorous foliage which may have increased susceptibility to disease and insect attacks. Phosphorus is an important nutrient in crop production, since many soils in their native state do not have sufficient available phosphorus to maximize crop yield. Potassium deficiency may cause necrosis or interveinal chlorosis. Plastics are synthetic or semi-synthetic moldable organic solids that are organic polymers of high molecular mass, most commonly derived from petrochemicals; these polymers are based on chains of carbon atoms alone or with oxygen, sulfur, or nitrogen. Plastic is a non- biodegradable major toxic pollutant. It pollutes earth and leads to air pollution and water pollution. Merely there is any safe way to dispose the hazardous plastic wastes. The study was targeted to estimate foliar level of NPK content of three plant species, viz. Cassia tora (Herb), Ailanthus excelsa (Tree) and Dalbergia sissoo (Tree) from polluted areas associated to polythene-industries as well as control areas having least pollution, where all the parameters were found to be higher than the control experiments.

Light quality and temperature effects on antirrhinum growth and development

PubMed Central

Khattak, Abdul Mateen; Pearson, Simon

2005-01-01

An experiment was carried out to examine the effects of light quality on the growth and development of antirrhinum under three different temperatures 19 °C, 24 °C and 27 °C in glasshouses. Five different colour filters (i.e. ‘Red absorbing’, ‘Blue absorbing’, ‘Blue and Red absorbing’ and two ‘partially Blue absorbing’ materials) were tested, with one clear polythene as a control. Plant height, internode length and leaf area were significantly affected by the spectral filters as well as the temperature. Analysis of color filter’s effect on presumed photoreceptors to exist indicated that antirrhinum plant height was regulated by the action of a blue acting photoreceptor (BAP) and not the phytochrome. There was no evidence for an effect of phytochrome or BAP on time to flowering, however, increasing temperature levels effectively decreased the time to flowering. To predict the effects of different spectral qualities and temperature, simple models were created from data on plant height, internode length and time to flowering. These models were then applied to simulate the potential benefits of spectral filters and temperature in manipulation of growth control and flowering in antirrhinum. PMID:15633247

A neutron diagnostic for high current deuterium beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rebai, M.; Perelli Cippo, E.; Cavenago, M.

2012-02-15

A neutron diagnostic for high current deuterium beams is proposed for installation on the spectral shear interferometry for direct electric field reconstruction (SPIDER, Source for Production of Ion of Deuterium Extracted from RF plasma) test beam facility. The proposed detection system is called Close-contact Neutron Emission Surface Mapping (CNESM). The diagnostic aims at providing the map of the neutron emission on the beam dump surface by placing a detector in close contact, right behind the dump. CNESM uses gas electron multiplier detectors equipped with a cathode that also serves as neutron-proton converter foil. The cathode is made of a thinmore » polythene film and an aluminium film; it is designed for detection of neutrons of energy >2.2 MeV with an incidence angle < 45 deg. CNESM was designed on the basis of simulations of the different steps from the deuteron beam interaction with the beam dump to the neutron detection in the nGEM. Neutron scattering was simulated with the MCNPX code. CNESM on SPIDER is a first step towards the application of this diagnostic technique to the MITICA beam test facility, where it will be used to resolve the horizontal profile of the beam intensity.« less

Biodegradation of thermally treated low density polyethylene by fungus Rhizopus oryzae NS 5.

PubMed

Awasthi, Shraddha; Srivastava, Neha; Singh, Tripti; Tiwary, D; Mishra, Pradeep Kumar

2017-05-01

Polythene is considered as one of the important object used in daily life. Being versatile in nature and resistant to microbial attack, they effectively cause environmental pollution. In the present study, biodegradation of low-density polyethylene (LDPE) have been performed using fungal lab isolate Rhizopus oryzae NS5. Lab isolate fungal strain capable of adhering to LDPE surface was used for the biodegradation of LDPE. This strain was identified as Rhizopus oryzae NS5 (Accession No. KT160362). Fungal growth was observed on the surface of the polyethylene when cultured in potato dextrose broth at 30 °C and 120 rpm, for 1 month. LDPE film was characterized before and after incubation by Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy and universal tensile machine. About 8.4 ± 3% decrease (gravimetrically) in weight and 60% reduction in tensile strength of polyethylene was observed. Scanning electron microscope analysis showed hyphal penetration and degradation on the surface of polyethylene. Atomic force microscope analysis showed increased surface roughness after treatment with fungal isolate. A thick network of fungal hyphae forming a biofilm was also observed on the surface of the polyethylene pieces. Present study shows the potential of Rhizopus oryzae NS5 in polyethylene degradation in eco friendly and sustainable manner.

Direct organogenesis of seaside heliotrope (Heliotropium crassavicum) using stem explants.

PubMed

Satyavani, K; Dheepak, V; Gurudeeban, S; Ramanathan, T

2013-10-15

Heliotropium crassavicum L. is a sand binder salt marsh herb with enormous traditional value and widely found in South Asia America and Europe. In the direct method of regeneration from stem explants, we observed the maximum number of shoot regeneration after four weeks culture of MS elongation medium with 2.0 mg L(-1) of 2, 4-D (17.27 +/- 0.51). It was clear that MS medium with 2.0 mg mL(-1) 2, 4-D alone suitable for shoot multiplication as well as shoot elongation then compared to other combination of auxin and cytokinin. In vitro shoots were excised from shoot clumps and transferred to rooting medium containing 2, 4-dichlorophenoxy acetic acid (0.5-3.0 mg L(-1)). The maximum number of root regeneration (6.4 +/- 0.416) and root length (6.08 +/- 0.07) were observed in MS rooting medium fortified with 2.5 mg L(-1) of 2, 4-D after 2 weeks of culture. 85% of in vitro raised plantlets with well-developed shoots and roots were transferred to ex vivo conditions into polythene bag containing sterile compost with ratio (v/v/v) of organic fertilizer: sand: peat (1:2:2; 3:1:0 or 2:2:1). Sixty five percent of acclimated plants were transferred to the pots under full sun where they grew well without any detectable phenotypic variations.

Emergence periodicity of Phlebotomus argentipes annandale and brunetti (Diptera: psychodidae): A laboratory study.

PubMed

Dinesh, D S; Singh, A; Kumar, V; Kesari, S; Kumar, A J; Kishore, K; Roy, S P; Bhattacharya, S K; Das, P

2009-12-01

Phlebotomus argentipes Annandale and Brunetti (Diptera: Psychodidae) is the vector for visceral leishmaniasis in India. The aspects of its biology such as feeding and man vector contact are associated with emergence periodicity of the adult. Hence, the present study was made to find out the actual emergence period of P. argentipes. Wild caught P. argentipes were confined in the rearing pots inside laboratory. The newly emerged adults were collected at hourly intervals and released in to separate polythene bags and were held at 4°C till death. Sand flies were segregated sex-wise after the death under a microscope. The emergence of adult was observed throughout the day. However, the male preferred dawn emergence and the female the dusk. Two peaks of emergence were found in a day; first one in the morning (0900h) and the second one in the evening (1800h). The ratio of both sexes was found to be about equal. The emergence of adult was found to be 77% out of total eggs laid, which was completed within 7-10 days from the 1st day of emergence under laboratory conditions (25°C to 31°C and 70% to 75% relative humidity). This study has important bearings to find out the actual time for personal protection against biting of sand flies to prevent the transmission of Kala-azar.

Acute Infection in Total Knee Arthroplasty: Diagnosis and Treatment

PubMed Central

Martínez-Pastor, Juan Carlos; Maculé-Beneyto, Francisco; Suso-Vergara, Santiago

2013-01-01

Infection is one of the most serious complications after total knee arthroplasty (TKA). The current incidence of prosthetic knee infection is 1-3%, depending on the series. For treatment and control to be more cost effective, multidisciplinary groups made up of professionals from different specialities who can work together to eradicate these kinds of infections need to be assembled. About the microbiology, Staphylococcus aureus and coagulase-negative staphylococcus were among the most frequent microorganisms involved (74%). Anamnesis and clinical examination are of primary importance in order to determine whether the problem may point to a possible acute septic complication. The first diagnosis may then be supported by increased CRP and ESR levels. The surgical treatment for a chronic prosthetic knee infection has been perfectly defined and standardized, and consists in a two-stage implant revision process. In contrast, the treatment for acute prosthetic knee infection is currently under debate. Considering the different surgical techniques that already exist, surgical debridement with conservation of the prosthesis and polythene revision appears to be an attractive option for both surgeon and patient, as it is less aggressive than the two-stage revision process and has lower initial costs. The different results obtained from this technique, along with prognosis factors and conclusions to keep in mind when it is indicated for an acute prosthetic infection, whether post-operative or haematogenous, will be analysed by the authors. PMID:23919094

MICROBIAL CONTAMINATION OF STREET VENDED FOODS FROM A UNIVERSITY CAMPUS IN BANGLADESH.

PubMed

Islam, Sufia; Nasrin, Nishat; Rizwan, Farhana; Nahar, Lutfun; Bhowmik, Adity; Esha, Sayma Afrin; Talukder, Kaisar Ali; Akter, Mahmuda; Roy, Ajoy; Ahmed, Muniruddin

2015-05-01

The microbiological quality of street vended food samples from Dhaka, Bangladesh was evaluated. The objective of the study was to identify the presence of common pathogens (Escherichia coli, Shigella spp, Salmonella and Vibrio spp) and to describe the molecular characterization of E coli, a commonly found pathogen in various street foods. Fifty food samples were collected from fixed and mobile vendors from two sampling locations (Mohakhali and Aftabnagar) in Dhaka city, Bangladesh. The tested samples included deep fried and fried snacks; quick lunch items; pickles; fruit chutney; baked items; spicy, sour and hot snacks etc: Juices, tamarind water and plain drinking water were also tested. Sterile polythene bags were used for collecting 200 g of each category of samples. They were tested for the presence of microorganisms following conventional microbiological processes. Biochemical tests followed by serology were done for the confirmation of Shigella and Salmonella. Serological reaction was carried out for confirmation of Vibrio spp. DNA was isolated for the molecular characterization to detect the pathogenic E. coli by polymerase chain reaction (PCR). Out of 50 food samples, six (12%) were confirmed to contain different species of E. coli and Shigella. Molecular characterization of E. coli revealed that three samples were contaminated with enteroaggregative E. coli (EAEC) and one was contaminated with enterotoxigenic E. coli (ETEC). Shigellaflexneri X variant was detected in one food item and Shigella flexneri 2a was found in drinking water. All these enteric pathogens could be the potential cause for foodborne illnesses.

Airborne emissions of carcinogens and respiratory sensitizers during thermal processing of plastics.

PubMed

Unwin, John; Coldwell, Matthew R; Keen, Chris; McAlinden, John J

2013-04-01

Thermoplastics may contain a wide range of additives and free monomers, which themselves may be hazardous substances. Laboratory studies have shown that the thermal decomposition products of common plastics can include a number of carcinogens and respiratory sensitizers, but very little information exists on the airborne contaminants generated during actual industrial processing. The aim of this work was to identify airborne emissions during thermal processing of plastics in real-life, practical applications. Static air sampling was conducted at 10 industrial premises carrying out compounding or a range of processes such as extrusion, blown film manufacture, vacuum thermoforming, injection moulding, blow moulding, and hot wire cutting. Plastics being processed included polyvinyl chloride, polythene, polypropylene, polyethylene terephthalate, and acrylonitrile-butadiene-styrene. At each site, static sampling for a wide range of contaminants was carried out at locations immediately adjacent to the prominent fume-generating processes. The monitoring data indicated the presence of few carcinogens at extremely low concentrations, all less than 1% of their respective WEL (Workplace Exposure Limit). No respiratory sensitizers were detected at any sites. The low levels of process-related fume detected show that the control strategies, which employed mainly forced mechanical general ventilation and good process temperature control, were adequate to control the risks associated with exposure to process-related fume. This substantiates the advice given in the Health and Safety Executive's information sheet No 13, 'Controlling Fume During Plastics Processing', and its broad applicability in plastics processing in general.

Recent progress in developing durable and permanent impeller pump.

PubMed

Qian, K X; Zeng, P; Ru, W M; Yuan, H Y

2002-04-01

Since 1980s, the author's impeller pump has successively achieved the device implantability, blood compatibility and flow pulsatility. In order to realize a performance durability, the author has concentrated in past years on solving the bearing problems of the impeller pump. Recent progress has been obtained in developing durable and permanent impeller blood pumps. At first, a durable impeller pump with rolling bearing and purge system has been developed, in which the wear-less rollers made of super-high-molecular weight polythene make the pump to work for years without mechanical wear; and the purge system enables the bearing to work in saline and heparin, and no thrombus therefore could be formed. Secondly, a durable centrifugal pump with rolling bearing and axially reciprocating impeller has been developed, the axial reciprocation of rotating impeller makes the fresh blood in and out of the bearing and to wash the rollers once a circle; in such way, no thrombus could be formed and no fluid infusion is necessary, which may bring inconvenience and discomfort to the receptors. Finally, a permanent maglev impeller pump has been developed, its rotor is suspended and floating in the blood under the action of permanent magnetic force and nonmagnetic forces, without need for position measurement and feed-back control. In conclusion, an implantable, pulsatile, and blood compatible impeller pump with durability may have more extensive applications than ever before and could replace the donor heart for transplantation in the future.

Assessment of Fluoride Concentration of Soil and Vegetables in Vicinity of Zinc Smelter, Debari, Udaipur, Rajasthan.

PubMed

Bhat, Nagesh; Jain, Sandeep; Asawa, Kailash; Tak, Mridula; Shinde, Kushal; Singh, Anukriti; Gandhi, Neha; Gupta, Vivek Vardhan

2015-10-01

As of late, natural contamination has stimulated as a reaction of mechanical and other human exercises. In India, with the expanding industrialization, numerous unsafe substances are utilized or are discharged amid generation as cleans, exhaust, vapours and gasses. These substances at last are blended in the earth and causes health hazards. To determine concentration of fluoride in soils and vegetables grown in the vicinity of Zinc Smelter, Debari, Udaipur, Rajasthan. Samples of vegetables and soil were collected from areas situated at 0, 1, 2, 5, and 10 km distance from the zinc smelter, Debari. Three samples of vegetables (i.e. Cabbage, Onion and Tomato) and 3 samples of soil {one sample from the upper layer of soil (i.e. 0 to 20 cm) and one from the deep layer (i.e. 20 - 40 cm)} at each distance were collected. The soil and vegetable samples were sealed in clean polythene bags and transported to the laboratory for analysis. One sample each of water and fertilizer from each distance were also collected. The mean fluoride concentration in the vegetables grown varied between 0.36 ± 0.69 to 0.71 ± 0.90 ppm. The fluoride concentration in fertilizer and water sample from various distances was found to be in the range of 1.4 - 1.5 ppm and 1.8 - 1.9 ppm respectively. The fluoride content of soil and vegetables was found to be higher in places near to the zinc smelter.

Post-harvest loss of farm raised Indian and Chinese major carps in the distribution channel from Mymensingh to Rangpur of Bangladesh.

PubMed

Hossain, M Motaleb; Rahman, Mahabubur; Hassan, M Nazmul; Nowsad, A A K M

2013-06-15

Post-harvest loss of catla (Catla catla), rohu (Labeo rohita), mrigal (Cirrhinus mrigala), silver carp (Hypophthalmichthys molitrix), grass carp (Ctenopharyngodon idella) and sarpunti (Puntius sarana) in a single distribution chain from harvest in Mymensingh to retail sale Rangpur town were determined, in order to obtain information on quality deterioration and existing handling and icing conditions so that suggestions for improving such practices can be made. Quality defect points of the fish at different steps of distribution channels were determined using a sensory based quality assessment tool. Percent quality loss of fish at each step of distribution was calculated from the number of cases that crossed sensory quality cut-off points. Neither of the fish lost their quality when they were in the farm gate, during transportation and in wholesale markets in Rangpur but most of the fishes lost their quality at the retail fish shops. The quality loss was 8, 12, 8, 6, 10 and 14% in case of C. catla, C. mrigala, L. rohita, H. molitrix, C. idella and P. sarana respectively in the retail markets. Fishes were not properly handled, bamboo baskets wrapped with polythene sheet were used as carrying container and inadequate ice was used during transportation. Retailers were found to be more proactive in the use of ice. However, most of the fishes were deteriorated during retail sale. The losses of farmed fishes could be minimized by adopting good handling practices like using insulated container and adequate icing.

Axial reciprocation of rotating impeller: a novel approach to preventing thrombosis in centrifugal pump.

PubMed

Qian, K X; Zeng, P; Ru, W M; Yuan, H Y

2002-01-01

For long-term application, rotary pumps have to solve the problems of bearing wear and thrombosis along the bearing. Some investigators choose the magnetic bearing for zero friction and to provide no contact between the rotor and stator; the former avoids the mechanical wear and the latter eliminates the possibility of thrombus formation. The authors have tried and have found, however, that it is difficult to apply a magnetic bearing to the rotary pump without disturbing its simplicity, reliability, and implantability, and have therefore developed a much simpler approach to achieve the same results. Instead of using a sliding bearing, a rolling bearing has been devised, and its friction is about 1/15 that of the sliding bearing. Furthermore, a wearproof material of ultra high molecular weight polythene has been adopted to make the rollers, and its antiwear property is eight times better than metal. The service life of the bearing has thus been prolonged. To prevent thrombus formation along the bearing, the impeller reciprocates axially as the impeller changes its rotating speed periodically to produce a pulsatile flow. The reciprocation is the result of the effects of a magnetic force between the motor rotor and stator and a hydraulic force between the blood flow and the impeller. Similar to a piston pump, the oscillating impeller can make the blood flow in and out of the bearing, resulting in washout with fresh blood once a cycle. This obviously helps to prevent thrombosis along the bearing and in the pump. Endurance tests with saline of this novel pump demonstrated device durability, promising long-term assisted circulation.

A study to evaluate primary dressings for the application of cultured keratinocytes.

PubMed

Price, R D; Das-Gupta, V; Frame, J D; Navsaria, H A

2001-12-01

Despite the recent improvements in cell culture and dermal regeneration methods, tissue engineering of skin has yet to receive widespread acceptance in the management of burn injuries. The reasons for this are complex and include not only the inherent costs of (particularly) setting up and running such a system but also the continuing difficulties in achieving successful engraftment of the neoepidermis. The latter has previously been addressed in a number of ways, including improving the recipient bed and using pre-confluent delivery systems to allow earlier application of cells to that wound bed. One area that has received little attention is that of the optimal wound dressing to use with this technology; the cells are very poorly attached at early time points, and, in this context, the traditional dressing of paraffin gauze has never been formally assessed in comparison with newer materials. Using a porcine acute wound chamber model, we performed a prospective randomised trial to assess four different wound dressings with reference to the amount of epidermal cover gained and the histological quality of the regenerated skin after 3 weeks. Out of the four materials tested, polyurethane foam (Allevyn) was superior histologically (although equal in take rate with paraffin gauze), whilst polythene sheet (Opsite) and silicone sheet were substantially inferior. We conclude that the traditional dressing used with this technology should be compared with polyurethane foam in a clinical trial. In the future, novel dressings should be formally tested against traditional methods before being adopted. Copyright 2001 The British Association of Plastic Surgeons.

Assessment of Fluoride Concentration of Soil and Vegetables in Vicinity of Zinc Smelter, Debari, Udaipur, Rajasthan

PubMed Central

Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Shinde, Kushal; Singh, Anukriti; Gandhi, Neha; Gupta, Vivek Vardhan

2015-01-01

Background As of late, natural contamination has stimulated as a reaction of mechanical and other human exercises. In India, with the expanding industrialization, numerous unsafe substances are utilized or are discharged amid generation as cleans, exhaust, vapours and gasses. These substances at last are blended in the earth and causes health hazards. Objective To determine concentration of fluoride in soils and vegetables grown in the vicinity of Zinc Smelter, Debari, Udaipur, Rajasthan. Materials and Methods Samples of vegetables and soil were collected from areas situated at 0, 1, 2, 5, and 10 km distance from the zinc smelter, Debari. Three samples of vegetables (i.e. Cabbage, Onion and Tomato) and 3 samples of soil {one sample from the upper layer of soil (i.e. 0 to 20 cm) and one from the deep layer (i.e. 20 – 40 cm)} at each distance were collected. The soil and vegetable samples were sealed in clean polythene bags and transported to the laboratory for analysis. One sample each of water and fertilizer from each distance were also collected. Results The mean fluoride concentration in the vegetables grown varied between 0.36 ± 0.69 to 0.71 ± 0.90 ppm. The fluoride concentration in fertilizer and water sample from various distances was found to be in the range of 1.4 – 1.5 ppm and 1.8 – 1.9 ppm respectively. Conclusion The fluoride content of soil and vegetables was found to be higher in places near to the zinc smelter. PMID:26557620

Influence of Button mushroom (Agaricus bisporus) on quality and refrigerated storage stability of patties prepared from sutchi catfish (Pangasius hypophthalmus).

PubMed

Nayak, Prakash Chandra; Raju, C V; Lakshmisha, I P; Singh, Rajkumar Ratankumar; Sofi, Faisal Rashid

2015-06-01

The ability of button mushroom (Agaricus bisporus) in changing physical, chemical, microbial and sensory properties of fish patties prepared from sutchi catfish (Pangasius hypophthalmus) was investigated. Two batches of fresh patties were prepared, one batch was treated with 15 % button mushroom (TP) and other batch was a control (CP) without mushroom. The patties were packed in polythene bags and stored under refrigerated condition (6 ± 2 ºC) without adding any preservatives for the estimation of storage stability. The analyses of patties were conducted at regular intervals of 3 days. The results showed that, Peroxide value, Thiobarbituric acid value, Free fatty acids increased significantly in CP at the end of 12 days whereas the TP was within the acceptable limit up to 16 days. Total volatile base nitrogen and Trimethylamine nitrogen also showed a similar trend. The Total plate count and Aerobic spore formers showed an increasing trend in CP when compared to TP. The sensory scores showed that the overall acceptability of CP were lower than TP, which was acceptable even after 16 days of storage. The present study showed that, the quality and storage stability of TP were observed to be in good condition up to 16 days and started deteriorating 20th day onwards, whereas the CP were acceptable only up to 12 days. Therefore it can be recommended that, addition of 15 % of button mushroom to sutchi catfish patty not only increases the nutritional quality but also increases the shelf life of patties under refrigerated storage.

[A new approach for improving antithrombogenicity in centrifugal pump].

PubMed

Qian, Kunxi; Zeng, Pei; Ru, Weimin; Yuan, Haiyu

2003-09-01

For long-term application of the rotary pumps, it is necessary to solve the problems of bearing wear and thrombosis along the bearing. Currently, many investigators choose the magnetic bearing to realize zero-friction and no contact between the rotor and stator; the former avoids the mechanical wear and the latter eliminates the possibility of thrombus formation. We tried and found that it is difficult to apply a magnetic bearing to rotary pump without disturbing its simplicity, reliability and implantable; therefore, we have developed a much simpler and much more creative approach to achieving the same results. Instead of the sliding bearing, a rolling bearing has been devised for the pump; its friction is about 1/15 of the sliding bearing. Furthermore, a wear-proof material of ultra-high-molecular weight polythene has been adopted in making the rollers, their anti-wear property in 8 times better than that of metal. Thereby, the service life of the bearing has extended to several years. For preventing the thrombus formation along the bearing, the impeller reciprocation axially as the impeller changes its rotating speed periodically to produce a pulsatile flow. The reciprocation is a result of the effects of a magnetic force between the motor rotor and stator, and a hydraulic force between the blood flow and the impeller. Similar to piston pump, the oscillating impeller can make the blood in and out of the bearing, resulting in wash-out once a circle. This is obviously beneficial to preventing thrombosis along the bearing and in the pump. The endurance tests with saline of this novel pump demonstrated a durability of the device. It promises to be able to assist the circulation of the patients permanently and to be able to replace the heart transplantation in the future.

The effect of clinically relevant thermocycling on the flexural properties of endodontic post materials.

PubMed

Stewardson, Dominic A; Shortall, Adrian C; Marquis, Peter M

2010-05-01

It is suggested that fibre-reinforced composite (FRC) posts have lower elastic moduli than metal posts and this will reduce the incidence of root fracture. However, the mechanical properties may be altered in the oral environment. The aims of this study were to determine the effect on the flexural properties of FRC and metal post materials produced by: (1) a thermocycling regime which was clinically relevant and representative of that which would occur during 1 year in the mouth and (2) storage for 1 year at body temperature. Nine FRC and two metal post material samples were sealed in polythene sleeves and thermocycled between 10 degrees C and 50 degrees C for 10,000 cycles. Additional samples were stored dry at 37 degrees C for 1 year. The flexural strength and moduli were determined by three-point bending and compared with untreated control samples. Thermocycling and storage at 37 degrees C for 1 year decreased the mean flexural modulus of all materials. This was statistically significant for 8 of 11 materials after thermocycling, and 4 of 11 materials after storage at 37 degrees C (p<0.05). Thermocycling and storage at 37 degrees C produced a non-significant increase in yield strength for both metal post materials. Thermocycling significantly increased the flexural strength of Postec while it decreased for the other FRC materials. Storage at 37 degrees C increased the flexural strength of three FRC materials (significantly for Postec) while it was decreased among the other materials. Although some of the changes noticed in flexural properties were statistically significant, it is doubtful that they are of sufficient magnitude to affect clinical performance.

Gamma irradiation of Tetrapleura tetraptera fruit as a post-harvest technique and its subsequent effect on some phytochemicals, free scavenging activity and physicochemical properties

NASA Astrophysics Data System (ADS)

Darfour, B.; Agbenyegah, S.; Ofosu, D. O.; Okyere, A. A.; Asare, I. K.

2014-09-01

Herbs, spices and medicinal plants have been cherished by many ancient cultures for their use in curing common ailments and promoting good health. The dry fruit of Tetrapleura tetraptera has a pleasant aroma and hence used as a spice for seasoning in many parts of Ghana. Contamination of the fruit can occur at any stage during harvesting, drying, processing, transportation and storage. T. tetraptera is prone to microbial contamination and insect infestation resulting in quality deterioration and economic loss. The study aimed at establishing the effect of gamma irradiation as a post-harvest processing technique on T. tetraptera fruit and the subsequent effect of the gamma irradiation on some phytochemicals, free radical scavenging activity and physicochemical properties. The T. tetraptera powder was packed in polythene bags and gamma irradiated with Cobalt 60 source at 5 kGy and 10 kGy at room temperature at a dose rate of 2 kGy/h. The total phenolic content, total flavonoid and DPPH free radical scavenging activity, pH, lactic acid, vitamin C, moisture, carbohydrate, protein and trace element content of the samples were analysed. The antioxidant potential of the T. tetraptera extract was observed to be enhanced in the solvent used for the extraction after the irradiation but not the radiation dose used. Irradiation only had substantial impacts on carbohydrate and protein, Cu, Mg, and Mn. The T. tetraptera studied was safe for human consumption as far as trace metal levels are concerned. This study therefore suggest that gamma irradiation up to 10 kGy could be used as a post-harvest technique in T. tetraptera as a spice or herb.

Microwave Spectrum of Hydrogen Bonded HEXAFLUOROISOPROPANOL•••WATER Complex

NASA Astrophysics Data System (ADS)

Shahi, Abhishek; Arunan, Elangannan

2014-06-01

Stabilizing α-helical structure of protein and dissolving a hard to dissolve polymer, polythene terphthalete, are some of the unique properties of the organic solvent Hexafluoroisopropanol (HFIP). After determining the complete microwave spectrum of HFIP monomer, we have recorded the spectrum of HFIP***H_2O complex. Ab initio calculations were used to optimize three different possible structures. The global minimum, structure 1, had HFIP as proton donor. Another promising structure, Structure 2, has been obtained from a molecular dynamic study. A total of 46 observed lines have been fitted well for obtaining the rotational and distortion constants within experimental uncertainty. The observed rotational constants are A = 1134.53898(77) MHz, B = 989.67594(44) MHz and C = 705.26602(20) MHz. Interestingly, the rotational constants of structure 1, structure 2 and experiments were very close. Experimentally observed distortion constants were close to structure 1. b-type transitions were stronger than c-type which is also consistent with the calculated dipole moment components of structure 1. Calculations predict a non-zero a-dipole moment but experimentally a-type transitions were absent. Microwave spectra of two of the deuterium isotopologues of this complex i.e. HFIP***D_2O (30 transitions) and HFIP***HOD (33 transitions) have been also observed. Search for other isotopologues are in progress. To characterize the nature of hydrogen bonding, Atoms in Molecules and Natural Bond Orbital theoretical analysis have been done. Experimental structure and these theoretical analyses indicate that the hydrogen bonding in HFIP***H_2O complex is stronger than that in water dimer. A. Shahi and E. Arunan, Talk number RK16, 68th International Symposium on Molecular Spectroscopy 2013, Ohio, USA. Yamaguchi, T.; Imura, S.; Kai, T.; Yoshida, K. Zeitschrift für Naturforsch. A 2013, 68a, 145.

Assessment of applicability index for better management of municipal solid waste: a case study of Dhanbad, India.

PubMed

Yadav, Pooja; Samadder, S R

2018-06-01

Selection of suitable municipal solid waste management (MSWM) options is one of the major challenges in urban areas of the developing countries. Success of MSWM requires accurate data of generation rate, composition and physico-chemical characteristics of solid wastes. Improper handling of solid waste can have significant environmental and aesthetical impacts. The present study proposes a new method (applicability index - P ik values) for identifying the most appropriate disposal option with the help of applicability values of Composting-C P , Incineration-I P and Landfill-L P for individual components of MSW based on the results of the physico-chemical analysis of the collected representative solid waste samples from the study area, Dhanbad, India. The mean values of moisture content, carbon, hydrogen, oxygen, nitrogen, sulfur, volatile organic carbon, fixed carbon, ash content, density and calorific values (CV) of individual components were used as input values in this process. Based on the proposed applicability index (P ik ), the highest P ik values were obtained for incineration (I P ) for plastics, polythene, paper, coconut shell, wood, cardboard, textile, thermocol (polystyrene), rubber, sugarcane bagasse, cow dung and leather wastes (I P  > C P  > L P ) due to high CV of these solid waste components; the highest P ik values were obtained for composting (C P ) of kitchen waste (C P  > I P  > L P ); and the highest P ik values for inert wastes were obtained for landfill option (L P  > I P  > C P ). The highest P ik value for a particular waste for a specific treatment option signifies that the waste is suitable for treatment/disposal using that option.

Assessment of transpiration efficiency in peanut (Arachis hypogaea L.) under drought using a lysimetric system.

PubMed

Ratnakumar, P; Vadez, V; Nigam, S N; Krishnamurthy, L

2009-11-01

Transpiration efficiency (TE) is an important trait for drought tolerance in peanut (Arachis hypogaea L.). The variation in TE was assessed gravimetrically using a long time interval in nine peanut genotypes (Chico, ICGS 44, ICGV 00350, ICGV 86015, ICGV 86031, ICGV 91114, JL 24, TAG 24 and TMV 2) grown in lysimeters under well-watered or drought conditions. Transpiration was measured by regularly weighing the lysimeters, in which the soil surface was mulched with a 2-cm layer of polythene beads. TE in the nine genotypes used varied from 1.4 to 2.9 g kg(-1) under well-watered and 1.7 to 2.9 g kg(-1) under drought conditions, showing consistent variation in TE among genotypes. A higher TE was found in ICGV 86031 in both well-watered and drought conditions and lower TE was found in TAG-24 under both water regimes. Although total water extraction differed little across genotypes, the pattern of water extraction from the soil profile varied among genotypes. High water extraction within 24 days following stress imposition was negatively related to pod yield (r(2) = 0.36), and negatively related to water extraction during a subsequent period of 32 days (r(2) = 0.73). By contrast, the latter, i.e. water extraction during a period corresponding to grain filling (24 to 56 days after flowering) was positively related to pod yield (r(2) = 0.36). TE was positively correlated with pod weight (r(2) = 0.30) under drought condition. Our data show that under an intermittent drought regime, TE and water extraction from the soil profile during a period corresponding to pod filling were the most important components.

Axial reciprocation of rotating impeller: a new concept of antithrombogenecity in centrifugal pump.

PubMed

Qian, K X; Zeng, P; Ru, W M; Yuan, H Y; Feng, Z G; Li, L

2001-01-01

For long-term application, rotary pumps have to solve the problems of bearing wear and thrombosis along the bearing. Most investigators choose the magnetic bearing to realize zero-friction and no contact between the rotor and stator; the former avoids the mechanical wear and the latter eliminates the possibility of thrombus formation. The authors have tried and found, however, that it is difficult to apply a magnetic bearing to the rotary pump without disturbing its simplicity, reliability and implantability, and have therefor developed a much simpler and much more creative approach to achieve the same results. Instead of using a sliding bearing, a rolling bearing has been devised for the pump, and its friction is about 1/15 of the sliding bearing. Furthermore, a wear-proof material of ultra-high-molecular weight polythene has been adopted to make the rollers, and its anti-wear property is 8 times better than metal. Thereby, the service life of the bearing has been prolonged to ten years according to the documents provided by the producer. In order to prevent the thrombus formation along the bearing, the impeller reciprocates axiallly as the impeller changes its rotating speed periodically to produce a pulsatile flow. The reciprocation is the result of the effects of a magnetic force between the motor rotor and stator, and a hydraulic force between the blood flow and the impeller. Similar to a piston pump, the oscillating impeller can make the blood flow in and out of the bearing, resulting in wash-out once a circle. This obviously helps to prevent thombosis along the bearing and in the pump. The endurance tests with saline of this novel pump demonstrated the durabililty of the device. It promises to be able to assist the circulation of patients permanently, and to be able to replace heart transplantation in the future.

Nutrient modeling for a semi-intensive IMC pond: an MS-Excel approach.

PubMed

Ray, Lala I P; Mal, B C; Moulick, S

2017-11-01

Semi-intensive Indian Major Carp (IMC) culture was practised in polythene lined dugout ponds at the Aquacultural Farm of Indian Institute of Technology, Kharagpur, West Bengal for 3 consecutive years at three different stocking densities (S.D), viz., 20,000, 35,000 and 50,000 numbers of fingerlings per hectare of water spread area. Fingerlings of Catla, Rohu and Mrigal were raised at a stocking ratio of 4:3:3. Total ammonia nitrogen (TAN) value along with other fishpond water quality parameters was monitored at 1 day intervals to ensure a good water ecosystem for a better fish growth. Water exchange was carried out before the TAN reached the critical limit. Field data on TAN obtained from the cultured fishponds stocked with three different stocking densities were used to study the dynamics of TAN. A developed model used to study the nutrient dynamics in shrimp pond was used to validate the observed data in the IMC pond ecosystem. Two years of observed TAN data were used to calibrate the spreadsheet model and the same model was validated using the third year observed data. The manual calibration based on the trial and error process of parameters adjustments was used and several simulations were performed by changing the model parameters. After adjustment of each parameter, the simulated and measured values of the water quality parameters were compared to judge the improvement in the model prediction. Forward finite difference discretization method was used in a MS-Excel spreadsheet to calibrate and validate the model for obtaining the TAN levels during the culture period. Observed data from the cultured fishponds of three different S.D were used to standardize 13 model parameters. The efficiency of the developed spreadsheet model was found to be more than 90% for the TAN estimation in the IMC cultured fishponds.

Measurement of surface contamination by certain antineoplastic drugs using high-performance liquid chromatography: applications in occupational hygiene investigations in hospital environments.

PubMed

Rubino, F M; Floridia, L; Pietropaolo, A M; Tavazzani, M; Colombi, A

1999-01-01

Within the context of continuing interest in occupational hygiene of hospitals as workplaces, the authors report the results of a preliminary study on surface contamination by certain antineoplastic drugs (ANDs), recently performed in eight cancer departments of two large general hospitals in Milan, Italy. Since reliable quantitative information on the exposure levels to individual drugs is mandatory to establish a strong interpretative framework for correctly assessing the health risks associated with manipulation of ANDs and rationally advise intervention priorities for exposure abatement, two automated analytical methods were set up using reverse-phase high-performance liquid chromatography for the measurement of contamination by 1) methotrexate (MTX) and 2) the three most important nucleoside analogue antineoplastic drugs (5-fluorouracil 5FU, Cytarabin CYA, Gemcytabin GCA) on surfaces such as those of preparation hoods and work-benches in the pharmacies of cancer wards. The methods are characterized by short analysis time (7 min) under isocratic conditions, by the use of a mobile phase with a minimal content of organic solvent and by high sensitivity, adequate to detect surface contamination in the 5-10 micrograms/m2 range. To exemplify the performance of the analytical methods in the assessment of contamination levels from the target analyte ANDs, data are reported on the contamination levels measured on various surfaces (such as on handles, floor surfaces and window panes, even far from the preparation hood). Analyte concentrations corresponding to 0.8-1.5 micrograms of 5FU were measured on telephones, 0.85-28 micrograms/m2 of CYA were measured on tables, 1.2-1150 micrograms/m2 of GCA on furniture and floors. Spillage fractions between 1-5% of the used ANDs (daily use 5FU 7-13 g; CYA 0.1-7.1 g; GCA 0.2-5 g) were measured on the disposable polythene-backed paper cover sheet of the preparation hood.

A high performance neutron powder diffractometer at 3 MW Triga Mark-II research reactor in Bangladesh

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamal, I., E-mail: imtiaz-kamal26@yahoo.com; Yunus, S. M., E-mail: yunussm11@yahoo.com; Datta, T. K., E-mail: tk-datta4@yahoo.com

2016-07-12

A high performance neutron diffractometer called Savar Neutron Diffractometer (SAND) was built and installed at radial beam port-2 of TRIGA Mark II research reactor at AERE, Savar, Dhaka, Bangladesh. Structural studies of materials are being done by this technique to characterize materials crystallograpohically and magnetically. The micro-structural information obtainable by neutron scattering method is very essential for determining its technological applications. This technique is unique for understanding the magnetic behavior in magnetic materials. Ceramic, steel, electronic and electric industries can be benefited from this facility for improving their products and fabrication process. This instrument consists of a Popovicimonochromator with amore » large linear position sensitive detector array. The monochromator consists of nine blades of perfect single crystal of silicon with 6 mm thickness each. The monochromator design was optimized to provide maximum flux on 3 mm diameter cylindrical sample with a relatively flat angular dependence of resolution. Five different wave lengths can be selected by orienting the crystal at various angles. A sapphire filter was used before the primary collimator to minimize the first neutron. The detector assembly is composed of 15 linear position sensitive proportional counters placed at either 1.1 m or 1.6 m from the sample position and enclosed in a air pad supported high density polythene shield. Position sensing is obtained by charge division using 1-wide NIM position encoding modules (PEM). The PEMs communicate with the host computer via USB. The detector when placed at 1.1 m, subtends 30° (2θ) at each step and covers 120° in 4 steps. When the detector is placed at 1.6 m it subtends 20° at each step and covers 120° in 6 steps. The instrument supports both low and high temperature sample environment. The instrument supports both low and high temperature sample environment. The diffractometer is a state-of-the art technology for diffraction study in our country.« less

A high performance neutron powder diffractometer at 3 MW Triga Mark-II research reactor in Bangladesh

NASA Astrophysics Data System (ADS)

Kamal, I.; Yunus, S. M.; Datta, T. K.; Zakaria, A. K. M.; Das, A. K.; Aktar, S.; Hossain, S.; Berliner, R.; Yelon, W. B.

2016-07-01

A high performance neutron diffractometer called Savar Neutron Diffractometer (SAND) was built and installed at radial beam port-2 of TRIGA Mark II research reactor at AERE, Savar, Dhaka, Bangladesh. Structural studies of materials are being done by this technique to characterize materials crystallograpohically and magnetically. The micro-structural information obtainable by neutron scattering method is very essential for determining its technological applications. This technique is unique for understanding the magnetic behavior in magnetic materials. Ceramic, steel, electronic and electric industries can be benefited from this facility for improving their products and fabrication process. This instrument consists of a Popovicimonochromator with a large linear position sensitive detector array. The monochromator consists of nine blades of perfect single crystal of silicon with 6mm thickness each. The monochromator design was optimized to provide maximum flux on 3mm diameter cylindrical sample with a relatively flat angular dependence of resolution. Five different wave lengths can be selected by orienting the crystal at various angles. A sapphire filter was used before the primary collimator to minimize the first neutron. The detector assembly is composed of 15 linear position sensitive proportional counters placed at either 1.1 m or 1.6 m from the sample position and enclosed in a air pad supported high density polythene shield. Position sensing is obtained by charge division using 1-wide NIM position encoding modules (PEM). The PEMs communicate with the host computer via USB. The detector when placed at 1.1 m, subtends 30˚ (2θ) at each step and covers 120˚ in 4 steps. When the detector is placed at 1.6 m it subtends 20˚ at each step and covers 120˚ in 6 steps. The instrument supports both low and high temperature sample environment. The instrument supports both low and high temperature sample environment. The diffractometer is a state-of-the art technology for diffraction study in our country.

SU-F-T-474: Evaluation of Dose Perturbation, Temperature and Sensitivity Variation With Accumulated Dose of MOSFET Detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ganesan, B; Prakasarao, A; Singaravelu, G

Purpose: The use of mega voltage gamma and x-ray sources with their skin sparring qualities in radiation therapy has been a boon in relieving patient discomfort and allowing high tumor doses to be given with fewer restrictions due to radiation effects in the skin. However, high doses given to deep tumors may require careful consideration of dose distribution in the buildup region in order to avoid irreparable damage to the skin. Methods: To measure the perturbation of MOSFET detector in Co60,6MV and 15MV the detector was placed on the surface of the phantom covered with the brass build up cap.more » To measure the effect of temperature the MOSFET detector was kept on the surface of hot water polythene container and the radiation was delivere. In order to measure the sensitivity variation with accumulated dose Measurements were taken by delivering the dose of 200 cGy to MOSFET until the MOSFET absorbed dose comes to 20,000 cGy Results: the Measurement was performed by positioning the bare MOSFET and MOSFET with brass build up cap on the top surface of the solid water phantom for various field sizes in order to find whether there is any attenuation caused in the dose distribution. The response of MOSFET was monitored for temperature ranging from 42 degree C to 22 degree C. The integrated dose dependence of MOSFET dosimeter sensitivity over different energy is not well characterized. This work investigates the dual-bias MOSFET dosimeter sensitivity response to 6 MV and 15 MV beams. Conclusion: From this study it is observed that unlike diode, bare MOSFET does not perturb the radiation field.. It is observed that the build-up influences the temperature dependency of MOSFET and causes some uncertainty in the readings. In the case of sensitivity variation with accumulated dose MOSFET showed higher sensitivity with dose accumulation for both the energies.« less

Effect of nonwoven jute agrotextile mulch on soil health and productivity of broccoli (Brassica oleracea L.) in lateritic soil.

PubMed

Manna, Koushik; Kundu, Manik Chandra; Saha, Biplab; Ghosh, Goutam Kumar

2018-01-16

A field experiment was conducted in winter season of 2015-2016 in the dry lateritic soil of Eastern India to study the effect of different thicknesses of nonwoven jute agrotextile mulches (NJATM) along with other mulches on soil health, growth and productivity of broccoli (Brassica oleracea L.). The experiment was conducted in randomized block design with six treatments viz., T 1 (control, i.e. no mulching), T 2 (300 gsm NJATM), T 3 (350 gsm NJATM), T 4 (400 gsm NJATM), T 5 (rice straw) and T 6 (black polythene mulch), each of which was replicated four times. The highest average curd weight (355.25 g) and yield (8.53 t ha -1 ) of broccoli were recorded in T 3 treatment. The lowest density of broad leaved weed, sedges and grasses were recorded in T 6 treatment which was statistically at par with T 4 . All the treatments composing of NJATM increased the population of all the soil microbes except bacteria in the root rhizosphere of broccoli from their initial population. On average, the highest population of fungi (54.0 × 10 3  cfu per g) and actinomycetes (134.75 × 10 3  cfu per g) was recorded with T 3 and T 4 treatments respectively in the post-harvest soil. The soil moisture was conserved in all treatments compared to control showing highest moisture content in T 4 treatment. Organic carbon and available N, P and K contents of soil were increased in all mulch treated plots compared to control, and their initial value and their highest value were recorded in T 3 . The NJATM of 350 gsm thickness was very effective compared to other mulches in increasing the growth and productivity of broccoli by suppressing weeds, increasing moisture, microbial population and nutrient content of the lateritic soil.

Development, acceptability, and nutritional characteristics of a low-cost, shelf-stable supplementary food product for vulnerable groups in Kenya.

PubMed

Kunyanga, Catherine; Imungi, Jasper; Okoth, Michael; Vadivel, Vellingiri; Biesalski, Hans Konrad

2012-03-01

Food-based approaches have been advocated as the best strategies to curb hunger and malnutrition in developing countries. The use of low-cost, locally available, nutritious foods in the development of supplementary foods has been recommended. To develop low-cost food supplements using different traditionally processed local foods, consisting of cereals, legumes, nuts, fish, and vegetables, to meet the nutrient requirements for vulnerable groups in Kenya. Four food supplements were developed and evaluated by taste panel procedures. The product containing amaranth grain, pigeon pea, sweet potato, groundnuts, and brown sugar was found to be the most acceptable supplement. Evaluation of nutritional composition, shelf-life, and cost analysis of the acceptable supplement was carried out to assess if it could satisfactorily provide more than 50% of the Recommended Dietary Allowances (RDAs) of the basic nutrients for vulnerable groups. The acceptable supplement contained 453.2 kcal energy, 12.7 g crude protein, 54.3 g soluble carbohydrates, 20.8 g crude fat, and 10.1 g crude fiber per 110 g. The micronutrient contents were 93.0 mg calcium, 172.4 mg magnesium, 2.7 mg zinc, 5.7 mg iron, 0.8 mg vitamin B₁, 0.2 mg vitamin B₂, 7.9 mg niacin, 100 microg folic acid, and 140 microg retinol equivalent per 110 g. The supplement also contained 21% total essential amino acid in addition to appreciable levels of palmitic, stearic, oleic, linoleic, and alpha-linolenic fatty acids. The shelf-life study showed that it could be stored in different packaging materials (polythene bags, gunny bags, and kraft paper) at 26°C without deleterious effects on its chemical composition for up to 4 months. Cost analysis of the supplement indicated that the product could be competitively sold at US$0.812/kg (KES 65.50/kg). Locally available indigenous foods can be used in the formulation of acceptable, low-cost, shelf-stable, nutritious supplementary foods for vulnerable groups.

In vitro utilization of lime treated olive cake as a component of complete feed for small ruminants.

PubMed

Ishfaq, A; Sharma, R K; Rastogi, A; Malla, B A; Farooq, J

2015-01-01

The current in vitro study was carried out to determine the chemical composition and inclusion level of lime treated olive cake on acid detergent fiber (ADF) replacement basis in adult male goats. Crude olive cake was collected and evaluated for proximate composition and protein fractionation. It was treated with 6% lime and incubated for 1 week under room temperature in 2 kg sealed polythene bags and was evaluated for proximate composition after incubation. Different isonitrogenous complete diets containing 0-50% of lime treated olive cake on ADF replacement basis were formulated as per the requirement of adult male goats. In ADF replacement, fiber and concentrate sources were replaced by lime treated olive cake by replacing the 0-50% ADF percentage of the total 40% ADF value of complete feed. The formulated complete diets were tested for in vitro degradation parameters. Treatment of olive cake with 6% slaked lime increased availability of cellulose and alleviated digestibility depression caused by high ether extract percentage. Organic matter, nitrogen free extract, ADF and neutral detergent fiber were significantly lowered by lime treatment of olive cake. The cornell net carbohydrate and protein system analysis showed that non-degradable protein represented by acid detergent insoluble nitrogen (ADIN) was 21.71% whereas the non-available protein represented by neutral detergent insoluble nitrogen (NDIN) was 38.86% in crude olive cake. The in vitro dry matter degradation (IVDMD) values were comparable at all replacement levels. However, a point of inflection was observed at 40% ADF replacement level, which was supported by truly degradable organic matter (TDOM), microbial biomass production (MBP), efficiency of MBP and partitioning factor values (PF). In our study, we concluded that there is comparable difference in composition of Indian olive cake when compared with European olive cake. The most important finding was that about 78% of nitrogen present in Indian olive cake is available to animal in contrary to that of European olive cake. We concluded from in vitro studies that Indian olive cake can be included in complete feed at 30% level (w/w; 40% ADF replacement) for feeding in small ruminants without compromising in vitro degradability of the feed.

A 3D finite element model to investigate prosthetic interface stresses of different posterior tibial slope.

PubMed

Shen, Yi; Li, Xiaomiao; Fu, Xiaodong; Wang, Weili

2015-11-01

Posterior tibial slope that is created during proximal tibial resection in total knee arthroplasty has emerged as an important factor in the mechanics of the knee joint and the surgical outcome. But the ideal degree of posterior tibial slope for recovery of the knee joint function and preventions of complications remains controversial and should vary in different racial groups. The objective of this paper is to investigate the effects of posterior tibial slope on contact stresses in the tibial polyethylene component of total knee prostheses. Three-dimensional finite element analysis was used to calculate contact stresses in tibial polyethylene component of total knee prostheses subjected to a compressive load. The 3D finite element model of total knee prosthesis was constructed from the images produced by 3D scanning technology. Stresses in tibial polyethylene component were calculated with four different posterior tibial slopes (0°, 3°, 6° and 9°). The 3D finite element model of total knee prosthesis we presented was well validated. We found that the stress distribution in the polythene as evaluated by the distributions of the von Mises stress, the maximum principle stress, the minimum principle stress and the Cpress were more uniform with 3° and 6° posterior tibial slopes than with 0° and 9° posterior tibial slopes. Moreover, the peaks of the above stresses and trends of changes with increasing degree of knee flexion were more ideal with 3° and 6° posterior slopes. The results suggested that the tibial component inclination might be favourable to 7°-10° so far as the stress distribution is concerned. The range of the tibial component inclination also can decrease the wear of polyethylene. Chinese posterior tibial slope is bigger than in the West, and the current domestic use of prostheses is imported from the West, so their demands to tilt back bone cutting can lead to shorten the service life of prostheses; this experiment result is of important clinical significance, guiding orthopaedic surgeon after the best angle to cut bone.

Bio-Medical Waste Managment in a Tertiary Care Hospital: An Overview.

PubMed

Pandey, Anita; Ahuja, Sanjiv; Madan, Molly; Asthana, Ajay Kumar

2016-11-01

Bio-Medical Waste (BMW) management is of utmost importance as its improper management poses serious threat to health care workers, waste handlers, patients, care givers, community and finally the environment. Simultaneously, the health care providers should know the quantity of waste generated in their facility and try to reduce the waste generation in day-to-day work because lesser amount of BMW means a lesser burden on waste disposal work and cost saving. To have an overview of management of BMW in a tertiary care teaching hospital so that effective interventions and implementations can be carried out for better outcome. The observational study was carried out over a period of five months from January 2016 to May 2016 in Chhatrapati Shivaji Subharti Hospital, Meerut by the Infection Control Team (ICT). Assessment of knowledge was carried out by asking set of questions individually and practice regarding awareness of BMW Management among the Health Care Personnel (HCP) was carried out by direct observation in the workplace. Further, the total BMW generated from the present setup in kilogram per bed per day was calculated by dividing the mean waste generated per day by the number of occupied beds. Segregation of BMW was being done at the site of generation in almost all the areas of the hospital in color coded polythene bags as per the hospital protocol. The different types of waste being collected were infectious solid waste in red bag, soiled infectious waste in yellow bag and sharp waste in puncture proof container and blue bag. Though awareness (knowledge) about segregation of BMW was seen in 90% of the HCP, 30%-35% did not practice. Out of the total waste generated (57912 kg.), 8686.8 kg. (15%) was infectious waste. Average infectious waste generated was 0.341 Kg per bed per day. The transport, treatment and disposal of each collected waste were outsourced and carried out by 'Synergy' waste management Pvt. Ltd. The practice of BMW Management was lacking in 30-35% HCP which may lead to mixing of the 15% infectious waste with the remaining non-infectious. Therefore, training courses and awareness programs about BMW management will be carried out every month targeting smaller groups.

Unit-dose packaged drugs for treating malaria.

PubMed

Orton, L; Barnish, G

2005-04-18

Unit-dose packaging of antimalarial drugs may improve malaria cure by making it easier for patients to take their treatment correctly. To summarize the effects of unit-dose packaged treatment on cure and treatment adherence in people with uncomplicated malaria. We searched the Cochrane Infectious Diseases Group Specialized Register (November 2004), CENTRAL (The Cochrane Library Issue 4, 2004), MEDLINE (1966 to November 2004), EMBASE (1980 to November 2004), LILACS (November 2004), conference proceedings, and reference lists of articles. We also contacted pharmaceutical companies, organizations, and researchers in the field. Randomized controlled trials (RCTs), cluster-RCTs, quasi-RCTs, and controlled before-and-after studies of unit-dose packaged drugs for treating uncomplicated malaria. We independently assessed study eligibility and methodological quality, and extracted data for an intention to treat analysis, where possible. We combined binary data using relative risk (RR) and the fixed-effect model, and presented them with 95% confidence intervals (CI). We attempted to contact study authors for additional information. Three quasi-RCTs (895 participants) and one cluster-RCT (6 health facilities) met the inclusion criteria. Trials were of poor methodological quality, and none adequately assessed treatment failure. Unit-dose packaged drugs (in conjunction with prescriber training and patient information) appeared to be associated with higher participant-reported treatment adherence in all trials.A meta-analysis of two trials (596 participants) showed that participant-reported treatment adherence was higher with blister-packed tablets compared with tablets in paper envelopes (RR 1.18, 1.12 to 1.25). Two trials using tablets in sectioned polythene bags as the intervention also noted an increase in participant-reported treatment adherence: the cluster-RCT (6 clusters) compared it with tablets in paper envelopes, and the other trial compared it with syrup in bottles (RR 2.15, 1.76 to 2.61; 299 participants). There is insufficient evidence to determine the effect of unit-dose packaged antimalarial drugs on treatment failure. Unit-dose packaging supported by prescriber training and patient information appears to improve participant-reported treatment adherence, but these data come from trials with methodological limitations.

"Half plate of rice to a male casual sexual partner, full plate belongs to the husband": findings from a qualitative study on sexual behaviour in relation to HIV and AIDS in northern Tanzania.

PubMed

Mwanga, Joseph R; Mshana, Gerry; Kaatano, Godfrey; Changalucha, John

2011-12-28

A thorough understanding of the contexts of sexual behaviour of the people who are vulnerable to HIV infection is an important component in the battle against AIDS epidemic. We conducted a qualitative study to investigate perceptions, attitudes and practices of sexually active people in three districts of northern Tanzania with the view of collecting data to inform the formulation of appropriate complementary interventions against HIV and AIDS in the study communities. We conducted 96 semi-structured interviews and 48 focus group discussions with sexually active participants (18-60 years of age) who were selected purposively in two fishing and one non-fishing communities. The study revealed a number of socio-economic and cultural factors which act as structural drivers of HIV epidemic. Mobility and migration were mentioned to be associated with the risk of HIV acquisition and transmission. Sexual promiscuous behaviour was common in all study communities. Chomolea, (a quick transactional sex) was reported to exist in fishing communities, whereas extramarital sex in the bush was reported in non-fishing community which was predominantly Christian and polygamous. Traditional practices such as Kusomboka (death cleansing through unprotected sex) was reported to exist. Other risky sexual behaviour and traditional practices together with their socio-economic and cultural contexts are presented in details and discussed. Knowledge of condom was low as some people mistook them for balloons to play with and as decorations for their living rooms. Acute scarcity of condoms in some remote areas such as vizingani (fishing islands) push some people to make their own condoms locally known as kondomu za pepsi using polythene bags. HIV prevention efforts can succeed by addressing sexual behaviour and its socio-economic and cultural contexts. More innovative, interdisciplinary and productive structural approaches to HIV prevention need to be developed in close collaboration with affected communities and be closely related to policy-making and implementation; to go beyond the limited success of traditional behavioural and biomedical interventions to particularly address the underlying social and structural drivers of HIV risk and vulnerability in the study communities.

Management of maxillofacial injuries in Iraq.

PubMed

Kummoona, Raja

2011-09-01

These clinical studies reflect the experience of the author in managing 673 patients treated during the last 8 years. All patients were treated in the Maxillofacial Unit, Surgical Specialties Hospital, Medical City, Baghdad, and in the author's private clinic. Included patients were 530 males and 143 females; patients' age ranged between 1 year and 75 years (mean, 38 y). Distribution of injuries was as follows: fracture of the mandible, 287 (42.64%); middle third injuries, 39 (5.79%); orbital injuries, 236 (35.07%; including 12 cases with cranioorbital injuries); injuries in children, 27 (4.0%); fracture of the zygoma, 52 (7.73%); and fracture of the nose, 40 (5.94%).Maxillofacial injuries in this study were classified as follows: (1) craniomaxillofacial with head injuries and cerebrospinal fluid leak; (2) fracture of the middle third including Le Fort I, II, and III and midline split in the face; (3) fracture of the mandible as an isolated injury or as part of a facial skeleton injury; and (4) isolated complex injuries of the zygoma, the orbital skeleton, and the nasoethmoidal region.The technique used for treating middle third injuries was external fixation either by halo frame (with vertical rods and cheek wires) or by box frame (using 4 external pins connected by rods) or internal fixation by suspending the middle third with internal wires (0.5 mm stainless steel) from the zygomatic process of the frontal bone beneath the zygomatic arch down the lower arch bar. Fractures of the mandible were treated by gunning splint with intermaxillary fixation (IMF) or with open reduction and fixation by stainless steel wire with IMF or by IMF screw or by an arch bar and IMF. Other fractures such as fracture of the orbit were treated by bone graft, sialastic, or lyophilized dura with open reduction. Fractures of the zygoma were treated by open reduction and fixation with stainless steel wire and bone graft or by reduction without fixation. Fractures of the nose were treated by reduction with straightening of the septum with a splint (lead splint or polythene) or by external splint with plaster of Paris. With the techniques used, results from managing these cases were satisfactory.

Bio-Medical Waste Managment in a Tertiary Care Hospital: An Overview

PubMed Central

Ahuja, Sanjiv; Madan, Molly; Asthana, Ajay Kumar

2016-01-01

Introduction Bio-Medical Waste (BMW) management is of utmost importance as its improper management poses serious threat to health care workers, waste handlers, patients, care givers, community and finally the environment. Simultaneously, the health care providers should know the quantity of waste generated in their facility and try to reduce the waste generation in day-to-day work because lesser amount of BMW means a lesser burden on waste disposal work and cost saving. Aim To have an overview of management of BMW in a tertiary care teaching hospital so that effective interventions and implementations can be carried out for better outcome. Materials and Methods The observational study was carried out over a period of five months from January 2016 to May 2016 in Chhatrapati Shivaji Subharti Hospital, Meerut by the Infection Control Team (ICT). Assessment of knowledge was carried out by asking set of questions individually and practice regarding awareness of BMW Management among the Health Care Personnel (HCP) was carried out by direct observation in the workplace. Further, the total BMW generated from the present setup in kilogram per bed per day was calculated by dividing the mean waste generated per day by the number of occupied beds. Results Segregation of BMW was being done at the site of generation in almost all the areas of the hospital in color coded polythene bags as per the hospital protocol. The different types of waste being collected were infectious solid waste in red bag, soiled infectious waste in yellow bag and sharp waste in puncture proof container and blue bag. Though awareness (knowledge) about segregation of BMW was seen in 90% of the HCP, 30%-35% did not practice. Out of the total waste generated (57912 kg.), 8686.8 kg. (15%) was infectious waste. Average infectious waste generated was 0.341 Kg per bed per day. The transport, treatment and disposal of each collected waste were outsourced and carried out by ‘Synergy’ waste management Pvt. Ltd. Conclusion The practice of BMW Management was lacking in 30-35% HCP which may lead to mixing of the 15% infectious waste with the remaining non-infectious. Therefore, training courses and awareness programs about BMW management will be carried out every month targeting smaller groups. PMID:28050362

A mini-bag technique for evaluation of fungicide effects on Trichoderma spp in mushroom compost.

PubMed

Abosriwil, Salem O; Clancy, Kevin J

2004-04-01

An in vivo technique was developed to observe colonisation of mushroom compost by Trichoderma spp. Isolates of T. harzianum (Th2), T. harzianum (Th1), T. koningii (Tk) and T. viride (Tv) were artificially introduced into compost using a mini-bag system. Wheat grains, colonised by Trichoderma spp, were placed centrally on a layer of compost at the bottom of 1-litre polythene bags which were then filled with 350 g of spawned or un-spawned compost, and partially sealed. After 14 and 21 days incubation at 27 degrees C, the bags were assessed for recovery of Trichoderma from middle and top zones using a needle stab re-isolation technique and a visual colonisation scoring system. Visible green mould contamination, similar to that observed in practice, developed within 21 days. The visual colonisation scoring was reliably related to the re-isolation success. In this evaluation, Trichoderma spp showed considerable differences in their relative abilities to colonise spawned and un-spawned compost, with Th2 isolates being consistently superior to the other isolates of Th1, Tk and Tv in colonising spawned compost. This technique was employed to evaluate the effects of fungicides on the colonisation of mushroom compost by three Trichoderma spp: Th2, Th1 and Tk, using 1-litre and 5-litre mini-bag systems. Aqueous suspensions of benomyl, carbendazim, thiabendazole, prochloraz and prochloraz+carbendazim incorporated into the compost at 50 mg litre(-1), or applied to spawn at 50 mg kg(-1), reduced the colonisation by Trichoderma spp. Prochloraz and prochloraz+carbendazim were superior to benomyl, carbendazim or thiabendazole in reducing compost colonisation by Th2, Th1 and Tk, with Th2 being the most persistent type, capable of colonising treated compost in the presence of all five fungicides. The prochloraz+carbendazim mixture, not normally used in mushroom production, was equal to or better than prochloraz alone. The incidence of green mould colonisation by Th2 was as extensive in the 5-litre compost bags as in the 1-litre bags, but colonisation by Th1 and Tk was more apparent in the 5-litre bags. The in vivo mini-bag evaluations using wheat grain Trichoderma inoculum and needle stab re-isolation procedures proved an efficient method for studying colonisation and screening for effectiveness of fungicides applied to mushroom compost or spawn.

"Half plate of rice to a male casual sexual partner, full plate belongs to the husband": Findings from a qualitative study on sexual behaviour in relation to HIV and AIDS in northern Tanzania

PubMed Central

2011-01-01

Background A thorough understanding of the contexts of sexual behaviour of the people who are vulnerable to HIV infection is an important component in the battle against AIDS epidemic. We conducted a qualitative study to investigate perceptions, attitudes and practices of sexually active people in three districts of northern Tanzania with the view of collecting data to inform the formulation of appropriate complementary interventions against HIV and AIDS in the study communities. Methods We conducted 96 semi-structured interviews and 48 focus group discussions with sexually active participants (18-60 years of age) who were selected purposively in two fishing and one non-fishing communities. Results The study revealed a number of socio-economic and cultural factors which act as structural drivers of HIV epidemic. Mobility and migration were mentioned to be associated with the risk of HIV acquisition and transmission. Sexual promiscuous behaviour was common in all study communities. Chomolea, (a quick transactional sex) was reported to exist in fishing communities, whereas extramarital sex in the bush was reported in non-fishing community which was predominantly Christian and polygamous. Traditional practices such as Kusomboka (death cleansing through unprotected sex) was reported to exist. Other risky sexual behaviour and traditional practices together with their socio-economic and cultural contexts are presented in details and discussed. Knowledge of condom was low as some people mistook them for balloons to play with and as decorations for their living rooms. Acute scarcity of condoms in some remote areas such as vizingani (fishing islands) push some people to make their own condoms locally known as kondomu za pepsi using polythene bags. Conclusions HIV prevention efforts can succeed by addressing sexual behaviour and its socio-economic and cultural contexts. More innovative, interdisciplinary and productive structural approaches to HIV prevention need to be developed in close collaboration with affected communities and be closely related to policy-making and implementation; to go beyond the limited success of traditional behavioural and biomedical interventions to particularly address the underlying social and structural drivers of HIV risk and vulnerability in the study communities. PMID:22202562

Logrank test and Interval Overlap Test for Bactericera cockerelli (Hemiptera: Triozidae) under different fertilization treatments for 7705 tomato hybrid.

PubMed

Vargas-Madríz, Haidel; Bautista-Martínez, Néstor; Vera-Graziano, Jorge; Sánchez-García, Prometeo; García-Gutiérrez, Cipriano; Sánchez-Soto, Saúl; García-Avila, Clemente de Jesús

2014-01-01

It is known that some nutrients can have both negative and positive effects on some populations of insects. To test this, the Logrank test and the Interval Overlap Test were evaluated for two crop cycles (February-May and May-August) of the 7705 tomato hybrid, and the effect on the psyllid, Bactericera cockerelli (Sulc.) (Hemiptera: Triozidae), was examined under greenhouse conditions. Tomato plants were in polythene bags and irrigated with the following solutions: T1-Steiner solution, T2-Steiner solution with nitrogen reduced to 25%, T3-Steiner solution with potassium reduced to 25%, and T4-Steiner solution with calcium reduced to 25%. In the Logrank test, a significant difference was found when comparing the survival parameters of B. cockerelli generated from the treatment cohorts: T1-T2; T1-T3; T1-T4; T2-T3; and T3-T4, while no significant differences were found in the T2-T4 comparison in the February-May cycle. In the May-August cycle, significant differences were found when comparing the survival parameters generated from the treatment cohorts: T1-T2; T1-T3; and T1-T4, while no significant differences were found in the T2-T3; T2-T4; and T3-T4 comparisons of survival parameters of B. cockerelli fed with the 7705 tomato hybrid. Also, the Interval Overlap Test was done on the treatment cohorts (T1, T2, T3, and T4) in the February-May and May-August cycles. T1 and T2 compare similarly in both cycles when feeding on the treatments up to 36 d. Similarly, in T1 and T3, the behavior of the insect is similar when feeding on the treatments up to 40 and 73 d, respectively. Comparisons T2-T3 and T2-T4 are similar when feeding on both treatments up to 42, 38 and 37, 63 d, respectively. Finally, the T3-T4 comparison was similar when feeding in both treatments up to 20 and 46 d, respectively. © The Author 2014. Published by Oxford University Press on behalf of the Entomological Society of America.

A comparative study of two-dimensional and three-dimensional ultrasonography in evaluation of gastric affections in dogs

PubMed Central

Pal, Madan; Singh, Prem; Tayal, Rishi; Dehmiwal, Dinesh; Behl, S. M.; Kumar, Sarvan; Chandolia, R. K

2015-01-01

Aim: The objective of the study was to obtain and compare the two-dimensional (2D) and three-dimensional (3D) ultrasonographic images of pathological conditions of the stomach in dogs in clinical cases. Materials and Methods: In our study, 12 clinical conditions of the stomach were recorded using ultrasonography. The ultrasound machine used for this study was 3D ultrasound machine (Nemio-XG: Toshiba, Japan) having four-dimensional volumetric transducer. Results: Present study was done to compare 2D and 3D ultrasonographic images in different gastric affections in dogs. In case of uremic gastropathy due to inflammatory response, the wall of the stomach was 0.6 cm thick and hyperechoic and gastric folds were also hyperechoic indicative of gastritis. In second, third, and fourth case of gastritis the wall of the stomach was 0.7, 0.6, and 0.55 cm, respectively thick and hyperechoic. In fifth and sixth case of gastritis, inflammatory response due to ingestion of polythene and sand led to gastritis and ultrasonographically, the wall of the stomach was 0.6 cm and 0.7 cm thick, respectively, and hyperechoic. In case of gastric ulcer, ultrasonographically, there was a disruption of gastric mucosal layer. In cases of gastric dilatation, anechoic content indicating fluid was seen in stomach area and due to dilatation boundary of the stomach was not clear and the increase in the lumen of the stomach was observed. In case of foreign body, ultrasonographically the wall of the stomach was 0.55 cm thick and hyperechoic. In the middle of the stomach, multiple hyperechoic shadows of the foreign bodies i.e. leather and bunch of straw of grass were observed. In case of pyloric stenosis ultrasonographically, anechoic lumen of the pylorus surrounded by 0.5 cm hypoechoic thickened muscle. In some cases, 3D ultrasonography was not diagnostic i.e. gastric foreign bodies and gastric dilatation. These conditions were better visualized on the 2D sonogram. Conclusion: The appearance of clinical conditions of the stomach such as gastritis and pyloric stenosis were more distinct on 3D ultrasonogram than 2D ultrasonogram. The 3D ultrasonography was not diagnostic in cases of gastric foreign bodies and gastric dilatation. PMID:27065634

Implementation strategies for health systems in low-income countries: an overview of systematic reviews

PubMed Central

Pantoja, Tomas; Opiyo, Newton; Lewin, Simon; Paulsen, Elizabeth; Ciapponi, Agustín; Wiysonge, Charles S; Herrera, Cristian A; Rada, Gabriel; Peñaloza, Blanca; Dudley, Lilian; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Oxman, Andrew D

2017-01-01

Background A key function of health systems is implementing interventions to improve health, but coverage of essential health interventions remains low in low-income countries. Implementing interventions can be challenging, particularly if it entails complex changes in clinical routines; in collaborative patterns among different healthcare providers and disciplines; in the behaviour of providers, patients or other stakeholders; or in the organisation of care. Decision-makers may use a range of strategies to implement health interventions, and these choices should be based on evidence of the strategies' effectiveness. Objectives To provide an overview of the available evidence from up-to-date systematic reviews about the effects of implementation strategies for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on alternative implementation strategies and informing refinements of the framework for implementation strategies presented in the overview. Methods We searched Health Systems Evidence in November 2010 and PDQ-Evidence up to December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of implementation strategies on professional practice and patient outcomes and that were published after April 2005. We excluded reviews with limitations important enough to compromise the reliability of the review findings. Two overview authors independently screened reviews, extracted data and assessed the certainty of evidence using GRADE. We prepared SUPPORT Summaries for eligible reviews, including key messages, 'Summary of findings' tables (using GRADE to assess the certainty of the evidence) and assessments of the relevance of findings to low-income countries. Main results We identified 7272 systematic reviews and included 39 of them in this overview. An additional four reviews provided supplementary information. Of the 39 reviews, 32 had only minor limitations and 7 had important methodological limitations. Most studies in the reviews were from high-income countries. There were no studies from low-income countries in eight reviews. Implementation strategies addressed in the reviews were grouped into four categories – strategies targeting: 1. healthcare organisations (e.g. strategies to change organisational culture; 1 review); 2. healthcare workers by type of intervention (e.g. printed educational materials; 14 reviews); 3. healthcare workers to address a specific problem (e.g. unnecessary antibiotic prescription; 9 reviews); 4. healthcare recipients (e.g. medication adherence; 15 reviews). Overall, we found the following interventions to have desirable effects on at least one outcome with moderate- or high-certainty evidence and no moderate- or high-certainty evidence of undesirable effects. 1.Strategies targeted at healthcare workers: educational meetings, nutrition training of health workers, educational outreach, practice facilitation, local opinion leaders, audit and feedback, and tailored interventions. 2.Strategies targeted at healthcare workers for specific types of problems: training healthcare workers to be more patient-centred in clinical consultations, use of birth kits, strategies such as clinician education and patient education to reduce antibiotic prescribing in ambulatory care settings, and in-service neonatal emergency care training. 3. Strategies targeted at healthcare recipients: mass media interventions to increase uptake of HIV testing; intensive self-management and adherence, intensive disease management programmes to improve health literacy; behavioural interventions and mobile phone text messages for adherence to antiretroviral therapy; a one time incentive to start or continue tuberculosis prophylaxis; default reminders for patients being treated for active tuberculosis; use of sectioned polythene bags for adherence to malaria medication; community-based health education, and reminders and recall strategies to increase vaccination uptake; interventions to increase uptake of cervical screening (invitations, education, counselling, access to health promotion nurse and intensive recruitment); health insurance information and application support. Authors' conclusions Reliable systematic reviews have evaluated a wide range of strategies for implementing evidence-based interventions in low-income countries. Most of the available evidence is focused on strategies targeted at healthcare workers and healthcare recipients and relates to process-based outcomes. Evidence of the effects of strategies targeting healthcare organisations is scarce. Implementation strategies for health systems in low-income countries What is the aim of this overview? The aim of this Cochrane Overview is to provide a broad summary of what is known about the effects of strategies for implementing interventions to improve health in low-income countries. This overview is based on 39 relevant systematic reviews. Each of these reviews searched for studies that evaluated the different types of implementation strategies within the scope of the question addressed by the review. The reviews included a total of 1332 studies. This overview is one of a series of four Cochrane Overviews that evaluate different health system arrangements. What was studied in the overview? A key function of health systems is implementing interventions to improve health. Coverage of essential health interventions remains low in low-income countries. Decision-makers may use a range of strategies to implement health interventions, and these choices should be based on evidence of the strategies' effectiveness. What are the main results of the overview? The following implementation strategies had desirable effects on at least one outcome with moderate- or high-certainty evidence and no moderate- or high-certainty evidence of undesirable effects. Strategies targeted at healthcare workers - Educational meetings. - Nutrition training of health workers. - Educational outreach (vs. no intervention). - Practice facilitation. - Local opinion leaders. - Audit and feedback. - Tailored interventions (vs. no intervention). Strategies targeted at healthcare workers for specific types of problems - Training healthcare workers to be more patient-centred in clinical consultations. - Use of birth kits. - Clinician education and patient education to reduce antibiotic prescribing in ambulatory care settings. - In-service neonatal emergency care training. Strategies targeted at healthcare recipients - Mass media interventions to increase immediate uptake of HIV testing (leaflets and gain-framed videos). - Intensive self-management and adherence, intensive disease management to improve health literacy. - Behavioural interventions and mobile phone text messages for adherence to antiretroviral therapy. - A one-time incentive to start or continue tuberculosis prophylaxis. - Default reminders for patients being treated for active tuberculosis. - Use of sectioned polythene bags for adherence to malaria medication. - Community-based health education, and reminders and recall strategies for vaccination uptake. - Providing free insecticide-treated bednets. - Interventions to improve uptake of cervical screening (invitations, education, counselling, access to health promotion nurse, and intensive recruitment). - Health insurance information and application support. The following implementation strategies had low- or very low-certainty evidence (or no studies available) for all the outcomes that were considered. Strategies targeted at healthcare organisations - Strategies to improve organisational culture. Strategies targeted at healthcare workers - Printed educational materials. - Internet-based learning. - Interprofessional education. - Teaching critical appraisal. - Educational outreach (vs. another intervention). - Pharmacist-provided services. - Safety checklists for use by medical care teams in acute hospital settings. - Tailored interventions (vs. non-tailored interventions, and interventions targeted at organisational and individual barriers vs. interventions targeted at individual barriers only). - Interventions to encourage the use of systematic reviews in clinical decision-making. Strategies targeted at healthcare workers for specific types of problems - Interventions to improve handwashing. - Interventions to reduce unnecessary caesarean section rates. - Training of traditional birth attendants. - Skilled birth attendance. - Training of traditional healers about STD and HIV medicine. Strategies targeted at healthcare recipients - Providing information/education for promoting HIV testing (multimedia). - Providing written medicine information. - Single interventions to improve health literacy. - Interventions to improve medication adherence. - Adherence – TB (immediate versus deferred incentives; cash vs. non-cash incentive; different levels of cash incentives; incentives vs. other interventions). - Adherence – malarial medication (blister packed tablets and capsules compared to tablets and capsules in paper envelopes; tablets in sectioned polythene bags compared to bottled syrup). - Training of healthcare workers, home visits, and monetary incentives to improve immunisation coverage. - Risk factor assessment to improve the uptake of cervical cancer screening. How up to date is this overview? The overview authors searched for systematic reviews that had been published up to 17 December 2016. PMID:28895659

Continuous multichannel monitoring of cave air carbon dioxide using a pumped non-dispersive infrared analyser

NASA Astrophysics Data System (ADS)

Mattey, D.

2012-04-01

The concentration of CO2 in cave air is one of the main controls on the rate of degassing of dripwater and on the kinetics of calcite precipitation forming speleothem deposits. Measurements of cave air CO2reveal great complexity in the spatial distribution among interconnected cave chambers and temporal changes on synoptic to seasonal time scales. The rock of Gibraltar hosts a large number of caves distributed over a 300 meter range in altitude and monthly sampling and analysis of air and water combined with continuous logging of temperature, humidity and drip discharge rates since 2004 reveals the importance of density-driven seasonal ventilation which drives large-scale advection of CO2-rich air though the cave systems. Since 2008 we have deployed automatic CO2 monitoring systems that regularly sample cave air from up to 8 locations distributed laterally and vertically in St Michaels Cave located near the top of the rock at 275m asl and Ragged Staff Cave located in the heart of the rock near sea level. The logging system is controlled by a Campbell Scientific CR1000 programmable datalogger which controls an 8 port manifold connected to sampling lines leading to different parts of the cave over a distance of up to 250 meters. The manifold is pumped at a rate of 5l per minute drawing air through 6mm or 8mm id polythene tubing via a 1m Nafion loop to reduce humidity to local ambient conditions. The outlet of the primary pump leads to an open split which is sampled by a second low flow pump which delivers air at 100ml/minute to a Licor 820 CO2 analyser. The software selects the port to be sampled, flushes the line for 2 minutes and CO2 analysed as a set of 5 measurements averaged over 10 second intervals. The system then switches to the next port and when complete shuts down to conserve power after using 20 watts over a 30 minute period of analysis. In the absence of local mains power (eg from the show cave lighting system) two 12v car batteries will power the system for analysis at 4h intervals for about 1 month. Two logging systems sampling cave air from 13 locations over a vertical range of 275m have run continuously for up to 5 years and return a very detailed picture of cave ventilation patterns and their responses to local weather and seasonal change.

Highly Enriched Uranium Metal Cylinders Surrounded by Various Reflector Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard Jones; J. Blair Briggs; Leland Monteirth

A series of experiments was performed at Los Alamos Scientific Laboratory in 1958 to determine critical masses of cylinders of Oralloy (Oy) reflected by a number of materials. The experiments were all performed on the Comet Universal Critical Assembly Machine, and consisted of discs of highly enriched uranium (93.3 wt.% 235U) reflected by half-inch and one-inch-thick cylindrical shells of various reflector materials. The experiments were performed by members of Group N-2, particularly K. W. Gallup, G. E. Hansen, H. C. Paxton, and R. H. White. This experiment was intended to ascertain critical masses for criticality safety purposes, as well asmore » to compare neutron transport cross sections to those obtained from danger coefficient measurements with the Topsy Oralloy-Tuballoy reflected and Godiva unreflected critical assemblies. The reflector materials examined in this series of experiments are as follows: magnesium, titanium, aluminum, graphite, mild steel, nickel, copper, cobalt, molybdenum, natural uranium, tungsten, beryllium, aluminum oxide, molybdenum carbide, and polythene (polyethylene). Also included are two special configurations of composite beryllium and iron reflectors. Analyses were performed in which uncertainty associated with six different parameters was evaluated; namely, extrapolation to the uranium critical mass, uranium density, 235U enrichment, reflector density, reflector thickness, and reflector impurities. In addition to the idealizations made by the experimenters (removal of the platen and diaphragm), two simplifications were also made to the benchmark models that resulted in a small bias and additional uncertainty. First of all, since impurities in core and reflector materials are only estimated, they are not included in the benchmark models. Secondly, the room, support structure, and other possible surrounding equipment were not included in the model. Bias values that result from these two simplifications were determined and associated uncertainty in the bias values were included in the overall uncertainty in benchmark keff values. Bias values were very small, ranging from 0.0004 ?k low to 0.0007 ?k low. Overall uncertainties range from ? 0.0018 to ? 0.0030. Major contributors to the overall uncertainty include uncertainty in the extrapolation to the uranium critical mass and the uranium density. Results are summarized in Figure 1. Figure 1. Experimental, Benchmark-Model, and MCNP/KENO Calculated Results The 32 configurations described and evaluated under ICSBEP Identifier HEU-MET-FAST-084 are judged to be acceptable for use as criticality safety benchmark experiments and should be valuable integral benchmarks for nuclear data testing of the various reflector materials. Details of the benchmark models, uncertainty analyses, and final results are given in this paper.« less

Some Hazards in the Manufacture and Use of Plastics

PubMed Central

Harris, D. Kenwin

1959-01-01

The expansion of the plastics industry during the last few years has introduced the possibility of hazards from new polymers and from modifications to old products. The first two sections of this paper deal with the diminishing incidence of dermatitis in synthetic resin plants using formaldehyde and with the toxic properties of some chemicals added during the manufacture of polyvinyl chloride compositions. After a brief reference to the hazards of catalysts used in the manufacture of new polymers in the polythene series, an account is given of the dangers of polytetrafluoroethylene. At high temperatures this important new polymer gives rise to decomposition products that may be harmful when inhaled, and smoking contaminated tobacco is one of the commonest ways in practice by which workmen may be affected. Animal experiments have confirmed the dangers of excessive heating of this polymer although the symptoms differ from those in human beings so that it is still not possible to incriminate any one of the products evolved at these temperatures. In a description of the hazards of manufacture of copolymers of butadiene that are new to this country the toxic properties of the monomers are given in some detail since some of these could prove harmful to the factory worker unless adequate precautions are taken, although the final materials are inert and free from danger. There is an increasing demand for the use of plastics by the general public and in specialized fields. They are widely used in the food industry and for domestic articles so that it is important that both the raw materials and the final article will not contaminate food or beverages. None of the constituents of the plastics should be capable of being extracted by the food or drink with which they come into contact, but in order to ensure this it is more convenient in practice to submit them in the first place to the action of a few selected solvents. Depending on the results of these initial experiments the materials may subsequently have to be submitted to pharmacological tests which may take several weeks to be completed. Three unusual problems in this field are described. The most difficult application in which to ensure freedom from danger is probably in the surgical use of plastics. Surgeons already have wide experience of the technique of handling and using plastics. Although the effects of a few selected plastics have been investigated and described, the response of living tissues to these materials is often unpredictable. The results of implantation in many patients will not be available for several years and it is suggested that the misuse of plastics in this field presents dangers that may not always be appreciated. Images PMID:14399937

U-series dating of pillow rim glass from recent volcanism at an Axial Volcanic Ridge

NASA Astrophysics Data System (ADS)

Thomas, L. E.; van Calsteren, P. W.; Jc024 Shipboard Party

2010-12-01

Visual observations using camera systems on the tethered ROV Isis deployed during the 2008 JC024 cruise to the Mid Atlantic Ridge at 45°N showed1 numerous monogenetic volcanoes that are essentially piles of lava pillows. The pillows are usually ˜1m diameter and >2m long and form mounds with average dimensions around 300m diameter, ˜150m altitude, and 0.005km3 volume. Small protrusions, 10-50cm long, which are numerous on pillows appear to be the youngest regions, were sampled using the pincers on the hydraulic arms of Isis, and returned to the surface. On the surface, any glass crust on the pillow protrusions was chiselled off using clean tools and double bagged in polythene. In the laboratory a portion of the glass was crushed in a jeweller’s roller mill and sieved using stainless steel sieves to obtain a sufficient amount of the fraction 0.125-0.250mm for hand picking, using a binocular microscope with the glass submerged in a mix of water and iso-propyl alcohol. The samples were subsequently leached using the procedure of Standish & Sims2. Samples were spiked with a mixed 229Th-236U spike and the U, Th and Ra fractions were separated and purified using standard chemistry methods. U and Th isotope ratios were determined using a Nu Instruments MC-ICPMS and Ra isotope ratios were determined using a MAT-262-RPQII TIMS instrument. The U-series data were evaluated using a MathCad program based on published4,5,6 equations. The data can be successfully modelled by assuming the ‘accepted’ mantle upwelling rate for the region of 11mm.y-1. The U-Th characteristics are mostly derived during ‘porous flow’ magma upwelling in the garnet stability zone, ranging to a depth of 60km with incipient melting starting at 70km. Above 60km depth the melt fraction will be >3% and the mantle mineralogy devoid of phases that fractionate U-Th significantly. Moreover, at melt fractions >3%, channel flow will be dominant and magma will transit to eruption on time-scales that are short enough to retain the U-Th characteristics from the garnet zone. The rheology of the deep mantle is such that melt generation should be in ‘steady state’ and U-Th characteristics should be constant. On that assumption, measured differences in collected samples can be used to calculate model ages relative to the ‘youngest’ sample, thus allowing the construction of a relative eruption timescale. However, significant fractional crystallisation is taking place in the oceanic crust, as testified by the frequent presence of plagioclase crystals up to mm-size in the glass samples. A ‘magma chamber’ on a scale larger than the magma channels is not required and we aim to assess the rate of plagioclase crystal growth using a 226Ra chronometer. This chronometer requires the assumption that Ba-Ra fractionation is constant and can then also be used to calculate a relative model age timescale, provided that not all samples are >8000 y old, which we consider unlikely. 1Searle, RC et al, EPSL in press, 2010 2Standish, JJ & Sims, KWW. Nature Geoscience V3, 2010 3Murton, BJ et al, in prep, 2010 4Williams, RW and Gill, JB, GCA 53, 1989 5Spiegelman, M and Elliott, T, EPSL 118, 1993 6Richardson, C and McKenzie, D, EPSL 128, 1994

Implementation strategies for health systems in low-income countries: an overview of systematic reviews.

PubMed

Pantoja, Tomas; Opiyo, Newton; Lewin, Simon; Paulsen, Elizabeth; Ciapponi, Agustín; Wiysonge, Charles S; Herrera, Cristian A; Rada, Gabriel; Peñaloza, Blanca; Dudley, Lilian; Gagnon, Marie-Pierre; Garcia Marti, Sebastian; Oxman, Andrew D

2017-09-12

A key function of health systems is implementing interventions to improve health, but coverage of essential health interventions remains low in low-income countries. Implementing interventions can be challenging, particularly if it entails complex changes in clinical routines; in collaborative patterns among different healthcare providers and disciplines; in the behaviour of providers, patients or other stakeholders; or in the organisation of care. Decision-makers may use a range of strategies to implement health interventions, and these choices should be based on evidence of the strategies' effectiveness. To provide an overview of the available evidence from up-to-date systematic reviews about the effects of implementation strategies for health systems in low-income countries. Secondary objectives include identifying needs and priorities for future evaluations and systematic reviews on alternative implementation strategies and informing refinements of the framework for implementation strategies presented in the overview. We searched Health Systems Evidence in November 2010 and PDQ-Evidence up to December 2016 for systematic reviews. We did not apply any date, language or publication status limitations in the searches. We included well-conducted systematic reviews of studies that assessed the effects of implementation strategies on professional practice and patient outcomes and that were published after April 2005. We excluded reviews with limitations important enough to compromise the reliability of the review findings. Two overview authors independently screened reviews, extracted data and assessed the certainty of evidence using GRADE. We prepared SUPPORT Summaries for eligible reviews, including key messages, 'Summary of findings' tables (using GRADE to assess the certainty of the evidence) and assessments of the relevance of findings to low-income countries. We identified 7272 systematic reviews and included 39 of them in this overview. An additional four reviews provided supplementary information. Of the 39 reviews, 32 had only minor limitations and 7 had important methodological limitations. Most studies in the reviews were from high-income countries. There were no studies from low-income countries in eight reviews.Implementation strategies addressed in the reviews were grouped into four categories - strategies targeting:1. healthcare organisations (e.g. strategies to change organisational culture; 1 review);2. healthcare workers by type of intervention (e.g. printed educational materials; 14 reviews);3. healthcare workers to address a specific problem (e.g. unnecessary antibiotic prescription; 9 reviews);4. healthcare recipients (e.g. medication adherence; 15 reviews).Overall, we found the following interventions to have desirable effects on at least one outcome with moderate- or high-certainty evidence and no moderate- or high-certainty evidence of undesirable effects.1.Strategies targeted at healthcare workers: educational meetings, nutrition training of health workers, educational outreach, practice facilitation, local opinion leaders, audit and feedback, and tailored interventions.2.Strategies targeted at healthcare workers for specific types of problems: training healthcare workers to be more patient-centred in clinical consultations, use of birth kits, strategies such as clinician education and patient education to reduce antibiotic prescribing in ambulatory care settings, and in-service neonatal emergency care training.3. Strategies targeted at healthcare recipients: mass media interventions to increase uptake of HIV testing; intensive self-management and adherence, intensive disease management programmes to improve health literacy; behavioural interventions and mobile phone text messages for adherence to antiretroviral therapy; a one time incentive to start or continue tuberculosis prophylaxis; default reminders for patients being treated for active tuberculosis; use of sectioned polythene bags for adherence to malaria medication; community-based health education, and reminders and recall strategies to increase vaccination uptake; interventions to increase uptake of cervical screening (invitations, education, counselling, access to health promotion nurse and intensive recruitment); health insurance information and application support. Reliable systematic reviews have evaluated a wide range of strategies for implementing evidence-based interventions in low-income countries. Most of the available evidence is focused on strategies targeted at healthcare workers and healthcare recipients and relates to process-based outcomes. Evidence of the effects of strategies targeting healthcare organisations is scarce.

Logrank Test and Interval Overlap Test for Bactericera cockerelli (Hemiptera: Triozidae) Under Different Fertilization Treatments for 7705 Tomato Hybrid

PubMed Central

Vargas-Madríz, Haidel; Bautista-Martínez, Néstor; Vera-Graziano, Jorge; Sánchez-García, Prometeo; García-Gutiérrez, Cipriano; Sánchez-Soto, Saúl; de Jesús García-Avila, Clemente

2014-01-01

Abstract It is known that some nutrients can have both negative and positive effects on some populations of insects. To test this, the Logrank test and the Interval Overlap Test were evaluated for two crop cycles (February–May and May–August) of the 7705 tomato hybrid, and the effect on the psyllid, Bactericera cockerelli (Sulc.) (Hemiptera: Triozidae), was examined under greenhouse conditions. Tomato plants were in polythene bags and irrigated with the following solutions: T1—Steiner solution, T2—Steiner solution with nitrogen reduced to 25%, T3—Steiner solution with potassium reduced to 25%, and T4—Steiner solution with calcium reduced to 25%. In the Logrank test, a significant difference was found when comparing the survival parameters of B. cockerelli generated from the treatment cohorts: T1–T2; T1–T3; T1–T4; T2–T3; and T3–T4, while no significant differences were found in the T2–T4 comparison in the February–May cycle. In the May–August cycle, significant differences were found when comparing the survival parameters generated from the treatment cohorts: T1–T2; T1–T3; and T1–T4, while no significant differences were found in the T2–T3; T2–T4; and T3–T4 comparisons of survival parameters of B. cockerelli fed with the 7705 tomato hybrid. Also, the Interval Overlap Test was done on the treatment cohorts (T1, T2, T3, and T4) in the February–May and May–August cycles. T1 and T2 compare similarly in both cycles when feeding on the treatments up to 36 d. Similarly, in T1 and T3, the behavior of the insect is similar when feeding on the treatments up to 40 and 73 d, respectively. Comparisons T2–T3 and T2–T4 are similar when feeding on both treatments up to 42, 38 and 37, 63 d, respectively. Finally, the T3–T4 comparison was similar when feeding in both treatments up to 20 and 46 d, respectively. RESUMEN. Se sabe que algunos nutrientes pueden tener efectos tanto negativos como positivos en algunas poblaciones de insectos. Para probar esto se evaluó la prueba de rango logarítmico y la prueba de Overlap intervalo de dos ciclos de cultivo (febrero–mayo y mayo–agosto) del híbrido de tomate 7705 y el efecto sobre el psílido, Bactericera cockerelli (Sulc) (Hemiptera: Triozidae) fue examinado bajo condiciones de invernadero. Las plantas de tomate estaban en bolsas de polietileno y regadas con las siguientes soluciones: T1: Solución de Steiner, T2: solución de Steiner con Nitrógeno a 25%, T3: solución de Steiner con Potasio a 25% y T4: solución de Steiner con Calcio a 25%. En la prueba de Logrank se encontró diferencia significativa al comparar los parámetros de supervivencia que se generaron en las cohortes de los tratamientos, T1 – T2; T1 – T3; T1 – T4; T2 – T3 y T3 – T4. En la comparación de T2 – T4, no se encontraron diferencias significativas, entre los parámetros de supervivencia de B. cockerelli ; para el ciclo Mayo-Agosto, se encontró diferencia significativa al comparar los parámetros de supervivencia que se generaron en las cohortes de los tratamientos, T1 - T2; T1 – T3; T1 – T4; en las comparaciones de T2 – T3; T2 – T4; T3 – T4, no se encontraron diferencias significativas, entre los parámetros de supervivencia de B. cockerelli alimentados con el hibrido de tomate 7705. De igual manera se realizó la Prueba de Traslape de Intervalos para las cohortes de los tratamientos (T1, T2, T3 y T4) en los ciclos de Febrero-Mayo y de Mayo-Agosto, se puede observar que la comparación de T1 con T2, son similares cuando se alimenta en ambos tratamientos hasta los 36 días, respectivamente. De igual manera, en la comparación (T1 y T3), siendo similar cuando el insecto se alimenta en ambos tratamientos hasta los 40 y 37 días, respectivamente. Las comparaciones (T2 y T3) y (T2 y T4) es similar cuando se alimenta en ambos tratamientos hasta los (42, 38) y (37, 63) días, respectivamente. Finalmente, la comparación para (T3 y T4) fue similar cuando se alimenta en ambos tratamientos hasta los 20 y 46 días, respectivamente. PMID:25527579