Post-Optimality Analysis In Aerospace Vehicle Design
NASA Technical Reports Server (NTRS)
Braun, Robert D.; Kroo, Ilan M.; Gage, Peter J.
1993-01-01
This analysis pertains to the applicability of optimal sensitivity information to aerospace vehicle design. An optimal sensitivity (or post-optimality) analysis refers to computations performed once the initial optimization problem is solved. These computations may be used to characterize the design space about the present solution and infer changes in this solution as a result of constraint or parameter variations, without reoptimizing the entire system. The present analysis demonstrates that post-optimality information generated through first-order computations can be used to accurately predict the effect of constraint and parameter perturbations on the optimal solution. This assessment is based on the solution of an aircraft design problem in which the post-optimality estimates are shown to be within a few percent of the true solution over the practical range of constraint and parameter variations. Through solution of a reusable, single-stage-to-orbit, launch vehicle design problem, this optimal sensitivity information is also shown to improve the efficiency of the design process, For a hierarchically decomposed problem, this computational efficiency is realized by estimating the main-problem objective gradient through optimal sep&ivity calculations, By reducing the need for finite differentiation of a re-optimized subproblem, a significant decrease in the number of objective function evaluations required to reach the optimal solution is obtained.
Constraint Force Equation Methodology for Modeling Multi-Body Stage Separation Dynamics
NASA Technical Reports Server (NTRS)
Toniolo, Matthew D.; Tartabini, Paul V.; Pamadi, Bandu N.; Hotchko, Nathaniel
2008-01-01
This paper discusses a generalized approach to the multi-body separation problems in a launch vehicle staging environment based on constraint force methodology and its implementation into the Program to Optimize Simulated Trajectories II (POST2), a widely used trajectory design and optimization tool. This development facilitates the inclusion of stage separation analysis into POST2 for seamless end-to-end simulations of launch vehicle trajectories, thus simplifying the overall implementation and providing a range of modeling and optimization capabilities that are standard features in POST2. Analysis and results are presented for two test cases that validate the constraint force equation methodology in a stand-alone mode and its implementation in POST2.
Sell, Rebecca E; Sarno, Renee; Lawrence, Brenna; Castillo, Edward M; Fisher, Roger; Brainard, Criss; Dunford, James V; Davis, Daniel P
2010-07-01
The three-phase model of ventricular fibrillation (VF) arrest suggests a period of compressions to "prime" the heart prior to defibrillation attempts. In addition, post-shock compressions may increase the likelihood of return of spontaneous circulation (ROSC). The optimal intervals for shock delivery following cessation of compressions (pre-shock interval) and resumption of compressions following a shock (post-shock interval) remain unclear. To define optimal pre- and post-defibrillation compression pauses for out-of-hospital cardiac arrest (OOHCA). All patients suffering OOHCA from VF were identified over a 1-month period. Defibrillator data were abstracted and analyzed using the combination of ECG, impedance, and audio recording. Receiver-operator curve (ROC) analysis was used to define the optimal pre- and post-shock compression intervals. Multiple logistic regression analysis was used to quantify the relationship between these intervals and ROSC. Covariates included cumulative number of defibrillation attempts, intubation status, and administration of epinephrine in the immediate pre-shock compression cycle. Cluster adjustment was performed due to the possibility of multiple defibrillation attempts for each patient. A total of 36 patients with 96 defibrillation attempts were included. The ROC analysis identified an optimal pre-shock interval of <3s and an optimal post-shock interval of <6s. Increased likelihood of ROSC was observed with a pre-shock interval <3s (adjusted OR 6.7, 95% CI 2.0-22.3, p=0.002) and a post-shock interval of <6s (adjusted OR 10.7, 95% CI 2.8-41.4, p=0.001). Likelihood of ROSC was substantially increased with the optimization of both pre- and post-shock intervals (adjusted OR 13.1, 95% CI 3.4-49.9, p<0.001). Decreasing pre- and post-shock compression intervals increases the likelihood of ROSC in OOHCA from VF.
NASA Astrophysics Data System (ADS)
Supian, Sudradjat; Wahyuni, Sri; Nahar, Julita; Subiyanto
2018-01-01
In this paper, traveling time workers from the central post office Bandung in delivering the package to the destination location was optimized by using Hungarian method. Sensitivity analysis against data changes that may occur was also conducted. The sampled data in this study are 10 workers who will be assigned to deliver mail package to 10 post office delivery centers in Bandung that is Cikutra, Padalarang, Ujung Berung, Dayeuh Kolot, Asia- Africa, Soreang, Situ Saeur, Cimahi, Cipedes and Cikeruh. The result of this research is optimal traveling time from 10 workers to 10 destination locations. The optimal traveling time required by the workers is 387 minutes to reach the destination. Based on this result, manager of the central post office Bandung can make optimal decisions to assign tasks to their workers.
Wang, Jiang; Luo, Dongjiao; Sun, Aihua; Yan, Jie
2008-07-01
Lipoproteins LipL32 and LipL21 and transmembrane protein OMPL1 have been confirmed as the superficial genus-specific antigens of Leptospira interrogans, which can be used as antigens for developing a universal genetic engineering vaccine. In order to obtain high expression of an artificial fusion gene lipL32/1-lipL21-ompL1/2, we optimized prokaryotic expression conditions. We used surface response analysis based on the central composite design to optimize culture conditions of a new antigen protein by recombinant Escherichia coli DE3.The culture conditions included initial pH, induction start time, post-induction time, Isopropyl beta-D-thiogalactopyranoside (IPTG) concentration, and temperature. The maximal production of antigen protein was 37.78 mg/l. The optimal culture conditions for high recombinant fusion protein was determined: initial pH 7.9, induction start time 2.5 h, a post-induction time of 5.38 h, 0.20 mM IPTG, and a post-induction temperature of 31 degrees C. Surface response analysis based on CCD increased the target production. This statistical method reduced the number of experiments required for optimization and enabled rapid identification and integration of the key culture condition parameters for optimizing recombinant protein expression.
Wang, Monan; Zhang, Kai; Yang, Ning
2018-04-09
To help doctors decide their treatment from the aspect of mechanical analysis, the work built a computer assisted optimal system for treatment of femoral neck fracture oriented to clinical application. The whole system encompassed the following three parts: Preprocessing module, finite element mechanical analysis module, post processing module. Preprocessing module included parametric modeling of bone, parametric modeling of fracture face, parametric modeling of fixed screw and fixed position and input and transmission of model parameters. Finite element mechanical analysis module included grid division, element type setting, material property setting, contact setting, constraint and load setting, analysis method setting and batch processing operation. Post processing module included extraction and display of batch processing operation results, image generation of batch processing operation, optimal program operation and optimal result display. The system implemented the whole operations from input of fracture parameters to output of the optimal fixed plan according to specific patient real fracture parameter and optimal rules, which demonstrated the effectiveness of the system. Meanwhile, the system had a friendly interface, simple operation and could improve the system function quickly through modifying single module.
Musci, Marilena; Yao, Shicong
2017-12-01
Pu-erh tea is a post-fermented tea that has recently gained popularity worldwide, due to potential health benefits related to the antioxidant activity resulting from its high polyphenolic content. The Folin-Ciocalteu method is a simple, rapid, and inexpensive assay widely applied for the determination of total polyphenol content. Over the past years, it has been subjected to many modifications, often without any systematic optimization or validation. In our study, we sought to optimize the Folin-Ciocalteu method, evaluate quality parameters including linearity, precision and stability, and then apply the optimized model to determine the total polyphenol content of 57 Chinese teas, including green tea, aged and ripened Pu-erh tea. Our optimized Folin-Ciocalteu method reduced analysis time, allowed for the analysis of a large number of samples, to discriminate among the different teas, and to assess the effect of the post-fermentation process on polyphenol content.
Scarpelli, Matthew; Eickhoff, Jens; Cuna, Enrique; Perlman, Scott; Jeraj, Robert
2018-01-30
The statistical analysis of positron emission tomography (PET) standardized uptake value (SUV) measurements is challenging due to the skewed nature of SUV distributions. This limits utilization of powerful parametric statistical models for analyzing SUV measurements. An ad-hoc approach, which is frequently used in practice, is to blindly use a log transformation, which may or may not result in normal SUV distributions. This study sought to identify optimal transformations leading to normally distributed PET SUVs extracted from tumors and assess the effects of therapy on the optimal transformations. The optimal transformation for producing normal distributions of tumor SUVs was identified by iterating the Box-Cox transformation parameter (λ) and selecting the parameter that maximized the Shapiro-Wilk P-value. Optimal transformations were identified for tumor SUV max distributions at both pre and post treatment. This study included 57 patients that underwent 18 F-fluorodeoxyglucose ( 18 F-FDG) PET scans (publically available dataset). In addition, to test the generality of our transformation methodology, we included analysis of 27 patients that underwent 18 F-Fluorothymidine ( 18 F-FLT) PET scans at our institution. After applying the optimal Box-Cox transformations, neither the pre nor the post treatment 18 F-FDG SUV distributions deviated significantly from normality (P > 0.10). Similar results were found for 18 F-FLT PET SUV distributions (P > 0.10). For both 18 F-FDG and 18 F-FLT SUV distributions, the skewness and kurtosis increased from pre to post treatment, leading to a decrease in the optimal Box-Cox transformation parameter from pre to post treatment. There were types of distributions encountered for both 18 F-FDG and 18 F-FLT where a log transformation was not optimal for providing normal SUV distributions. Optimization of the Box-Cox transformation, offers a solution for identifying normal SUV transformations for when the log transformation is insufficient. The log transformation is not always the appropriate transformation for producing normally distributed PET SUVs.
NASA Astrophysics Data System (ADS)
Scarpelli, Matthew; Eickhoff, Jens; Cuna, Enrique; Perlman, Scott; Jeraj, Robert
2018-02-01
The statistical analysis of positron emission tomography (PET) standardized uptake value (SUV) measurements is challenging due to the skewed nature of SUV distributions. This limits utilization of powerful parametric statistical models for analyzing SUV measurements. An ad-hoc approach, which is frequently used in practice, is to blindly use a log transformation, which may or may not result in normal SUV distributions. This study sought to identify optimal transformations leading to normally distributed PET SUVs extracted from tumors and assess the effects of therapy on the optimal transformations. Methods. The optimal transformation for producing normal distributions of tumor SUVs was identified by iterating the Box-Cox transformation parameter (λ) and selecting the parameter that maximized the Shapiro-Wilk P-value. Optimal transformations were identified for tumor SUVmax distributions at both pre and post treatment. This study included 57 patients that underwent 18F-fluorodeoxyglucose (18F-FDG) PET scans (publically available dataset). In addition, to test the generality of our transformation methodology, we included analysis of 27 patients that underwent 18F-Fluorothymidine (18F-FLT) PET scans at our institution. Results. After applying the optimal Box-Cox transformations, neither the pre nor the post treatment 18F-FDG SUV distributions deviated significantly from normality (P > 0.10). Similar results were found for 18F-FLT PET SUV distributions (P > 0.10). For both 18F-FDG and 18F-FLT SUV distributions, the skewness and kurtosis increased from pre to post treatment, leading to a decrease in the optimal Box-Cox transformation parameter from pre to post treatment. There were types of distributions encountered for both 18F-FDG and 18F-FLT where a log transformation was not optimal for providing normal SUV distributions. Conclusion. Optimization of the Box-Cox transformation, offers a solution for identifying normal SUV transformations for when the log transformation is insufficient. The log transformation is not always the appropriate transformation for producing normally distributed PET SUVs.
Automation of POST Cases via External Optimizer and "Artificial p2" Calculation
NASA Technical Reports Server (NTRS)
Dees, Patrick D.; Zwack, Mathew R.
2017-01-01
During early conceptual design of complex systems, speed and accuracy are often at odds with one another. While many characteristics of the design are fluctuating rapidly during this phase there is nonetheless a need to acquire accurate data from which to down-select designs as these decisions will have a large impact upon program life-cycle cost. Therefore enabling the conceptual designer to produce accurate data in a timely manner is tantamount to program viability. For conceptual design of launch vehicles, trajectory analysis and optimization is a large hurdle. Tools such as the industry standard Program to Optimize Simulated Trajectories (POST) have traditionally required an expert in the loop for setting up inputs, running the program, and analyzing the output. The solution space for trajectory analysis is in general non-linear and multi-modal requiring an experienced analyst to weed out sub-optimal designs in pursuit of the global optimum. While an experienced analyst presented with a vehicle similar to one which they have already worked on can likely produce optimal performance figures in a timely manner, as soon as the "experienced" or "similar" adjectives are invalid the process can become lengthy. In addition, an experienced analyst working on a similar vehicle may go into the analysis with preconceived ideas about what the vehicle's trajectory should look like which can result in sub-optimal performance being recorded. Thus, in any case but the ideal either time or accuracy can be sacrificed. In the authors' previous work a tool called multiPOST was created which captures the heuristics of a human analyst over the process of executing trajectory analysis with POST. However without the instincts of a human in the loop, this method relied upon Monte Carlo simulation to find successful trajectories. Overall the method has mixed results, and in the context of optimizing multiple vehicles it is inefficient in comparison to the method presented POST's internal optimizer functions like any other gradient-based optimizer. It has a specified variable to optimize whose value is represented as optval, a set of dependent constraints to meet with associated forms and tolerances whose value is represented as p2, and a set of independent variables known as the u-vector to modify in pursuit of optimality. Each of these quantities are calculated or manipulated at a certain phase within the trajectory. The optimizer is further constrained by the requirement that the input u-vector must result in a trajectory which proceeds through each of the prescribed events in the input file. For example, if the input u-vector causes the vehicle to crash before it can achieve the orbital parameters required for a parking orbit, then the run will fail without engaging the optimizer, and a p2 value of exactly zero is returned. This poses a problem, as this "non-connecting" region of the u-vector space is far larger than the "connecting" region which returns a non-zero value of p2 and can be worked on by the internal optimizer. Finding this connecting region and more specifically the global optimum within this region has traditionally required the use of an expert analyst.
Classifying post-stroke fatigue: Optimal cut-off on the Fatigue Assessment Scale.
Cumming, Toby B; Mead, Gillian
2017-12-01
Post-stroke fatigue is common and has debilitating effects on independence and quality of life. The Fatigue Assessment Scale (FAS) is a valid screening tool for fatigue after stroke, but there is no established cut-off. We sought to identify the optimal cut-off for classifying post-stroke fatigue on the FAS. In retrospective analysis of two independent datasets (the '2015' and '2007' studies), we evaluated the predictive validity of FAS score against a case definition of fatigue (the criterion standard). Area under the curve (AUC) and sensitivity and specificity at the optimal cut-off were established in the larger 2015 dataset (n=126), and then independently validated in the 2007 dataset (n=52). In the 2015 dataset, AUC was 0.78 (95% CI 0.70-0.86), with the optimal ≥24 cut-off giving a sensitivity of 0.82 and specificity of 0.66. The 2007 dataset had an AUC of 0.83 (95% CI 0.71-0.94), and applying the ≥24 cut-off gave a sensitivity of 0.84 and specificity of 0.67. Post-hoc analysis of the 2015 dataset revealed that using only the 3 most predictive FAS items together ('FAS-3') also yielded good validity: AUC 0.81 (95% CI 0.73-0.89), with sensitivity of 0.83 and specificity of 0.75 at the optimal ≥8 cut-off. We propose ≥24 as a cut-off for classifying post-stroke fatigue on the FAS. While further validation work is needed, this is a positive step towards a coherent approach to reporting fatigue prevalence using the FAS. Copyright © 2017 Elsevier Inc. All rights reserved.
Optimization of territory control of the mail carrier by using Hungarian methods
NASA Astrophysics Data System (ADS)
Supian, S.; Wahyuni, S.; Nahar, J.; Subiyanto
2018-03-01
In this paper, the territory control of the mail carrier from the central post office Bandung in delivering the package to the destination location was optimized by using Hungarian method. Sensitivity analysis against data changes that may occur was also conducted. The sampled data in this study are the territory control of 10 mail carriers who will be assigned to deliver mail package to 10 post office delivery centers in Bandung. The result of this research is the combination of territory control optimal from 10 mail carriers as follows: mail carrier 1 to Cikutra, mail carrier 2 to Ujung Berung, mail carrier 3 to Dayeuh Kolot, mail carrier 4 to Padalarang, mail carrier 5 to Situ Saeur, mail carrier 6 to Cipedes, mail carrier 7 to Cimahi, mail carrier 8 to Soreang, mail carrier 9 to Asia-Afrika, mail carrier 10 to Cikeruh. Based on this result, manager of the central post office Bandung can make optimal decisions to assign tasks to their mail carriers.
Baj, Stefan; Słupska, Roksana; Krawczyk, Tomasz
2013-01-15
The possibility of the utilization of chemiluminescence post-column luminol oxidation (CL) in a HPLC system for silyl peroxides analysis has been investigated. The conditions of HPLC separation for 12 silyl peroxides, representing bissilyl and alkyl-silyl peroxides, as well as their potential impurities, were established. Optimal chemiluminescent post-column reaction conditions were found using central composite design (CCD) and response surface methodology (RSM). The interaction effects of four of the most important operating variables - the concentrations of luminol, hemin, sodium hydroxide and the post-column solution flow rate - on the light intensity were evaluated. The optimized conditions for analysis were the same for bissilyl and alkyl-silyl peroxides for the base concentration (0.03 M), the luminol concentration (0.4 g L(-1)) and the hemin concentration (0.3 g L(-1)). The only differences occurred in a reagent flow rate (for bissilyl peroxide -0.3 mL min(-1) and for alkyl-silyl peroxides -0.9 mL min(-1)). Under optimal conditions, the detection limits were in the 0.07-0.16 nM range for bissilyl, and 0.53-1.01 for alkyl-silyl peroxides. The calibration curves were linear in the 0.25-3 nM range for bissilyl and the 2.5-25 range for alkyl-silyl peroxides. Intra-day and inter-day precision was lower than 5.5% for each tested concentration level. A mechanism of luminol oxidation by silyl peroxides involving a hydrolysis step with the formation of hydrogen peroxide or hydroperoxide was proposed. Copyright © 2012 Elsevier B.V. All rights reserved.
Design and Analysis of a New Hair Sensor for Multi-Physical Signal Measurement
Yang, Bo; Hu, Di; Wu, Lei
2016-01-01
A new hair sensor for multi-physical signal measurements, including acceleration, angular velocity and air flow, is presented in this paper. The entire structure consists of a hair post, a torsional frame and a resonant signal transducer. The hair post is utilized to sense and deliver the physical signals of the acceleration and the air flow rate. The physical signals are converted into frequency signals by the resonant transducer. The structure is optimized through finite element analysis. The simulation results demonstrate that the hair sensor has a frequency of 240 Hz in the first mode for the acceleration or the air flow sense, 3115 Hz in the third and fourth modes for the resonant conversion, and 3467 Hz in the fifth and sixth modes for the angular velocity transformation, respectively. All the above frequencies present in a reasonable modal distribution and are separated from interference modes. The input-output analysis of the new hair sensor demonstrates that the scale factor of the acceleration is 12.35 Hz/g, the scale factor of the angular velocity is 0.404 nm/deg/s and the sensitivity of the air flow is 1.075 Hz/(m/s)2, which verifies the multifunction sensitive characteristics of the hair sensor. Besides, the structural optimization of the hair post is used to improve the sensitivity of the air flow rate and the acceleration. The analysis results illustrate that the hollow circular hair post can increase the sensitivity of the air flow and the II-shape hair post can increase the sensitivity of the acceleration. Moreover, the thermal analysis confirms the scheme of the frequency difference for the resonant transducer can prominently eliminate the temperature influences on the measurement accuracy. The air flow analysis indicates that the surface area increase of hair post is significantly beneficial for the efficiency improvement of the signal transmission. In summary, the structure of the new hair sensor is proved to be feasible by comprehensive simulation and analysis. PMID:27399716
Boyle, Christopher; Kim, Il Yong
2011-06-03
Since the late 1980s, computational analysis of total hip arthroplasty (THA) prosthesis components has been completed using macro-level bone remodeling algorithms. The utilization of macro-sized elements requires apparent bone densities to predict cancellous bone strength, thereby, preventing visualization and analysis of realistic trabecular architecture. In this study, we utilized a recently developed structural optimization algorithm, design space optimization (DSO), to perform a micro-level three-dimensional finite element bone remodeling simulation on the human proximal femur pre- and post-THA. The computational simulation facilitated direct performance comparison between two commercially available prosthetic implant stems from Zimmer Inc.: the Alloclassic and the Mayo conservative. The novel micro-level approach allowed the unique ability to visualize the trabecular bone adaption post-operation and to quantify the changes in bone mineral content by region. Stress-shielding and strain energy distribution were also quantified for the immediate post-operation and the stably fixated, post-remodeling conditions. Stress-shielding was highest in the proximal region and remained unchanged post-remodeling; conversely, the mid and distal portions show large increases in stress, suggesting a distal shift in the loadpath. The Mayo design conserves bone mass, while simultaneously reducing the incidence of stress-shielding compared to the Alloclassic, revealing a key benefit of the distinctive geometry. Several important factors for stable fixation, determined in clinical evaluations from the literature, were evident in both designs: high levels of proximal bone loss and distal bone densification. The results suggest this novel computational framework can be utilized for comparative hip prosthesis shape, uniquely considering the post-operation bone remodeling as a design criterion. Copyright © 2011 Elsevier Ltd. All rights reserved.
Chen, Z M; Ji, S B; Shi, X L; Zhao, Y Y; Zhang, X F; Jin, H
2017-02-10
Objective: To evaluate the cost-utility of different hepatitis E vaccination strategies in women aged 15 to 49. Methods: The Markov-decision tree model was constructed to evaluate the cost-utility of three hepatitis E virus vaccination strategies. Parameters of the models were estimated on the basis of published studies and experience of experts. Both methods on sensitivity and threshold analysis were used to evaluate the uncertainties of the model. Results: Compared with non-vaccination group, strategy on post-screening vaccination with rate as 100%, could save 0.10 quality-adjusted life years per capital in the women from the societal perspectives. After implementation of screening program and with the vaccination rate reaching 100%, the incremental cost utility ratio (ICUR) of vaccination appeared as 5 651.89 and 6 385.33 Yuan/QALY, respectively. Vaccination post to the implementation of a screening program, the result showed better benefit than the vaccination rate of 100%. Results from the sensitivity analysis showed that both the cost of hepatitis E vaccine and the inoculation compliance rate presented significant effects. If the cost were lower than 191.56 Yuan (RMB) or the inoculation compliance rate lower than 0.23, the vaccination rate of 100% strategy was better than the post-screening vaccination strategy, otherwise the post-screening vaccination strategy appeared the optimal strategy. Conclusion: Post-screening vaccination for women aged 15 to 49 from social perspectives seemed the optimal one but it had to depend on the change of vaccine cost and the rate of inoculation compliance.
Wang, Hongbin; Hu, Gaofei; Zhang, Yongqian; Yuan, Zheng; Zhao, Xuan; Zhu, Yong; Cai, De; Li, Yujuan; Xiao, Shengyuan; Deng, Yulin
2010-07-15
The post-digestion (18)O labeling method decouples protein digestion and peptide labeling. This method allows labeling conditions to be optimized separately and increases labeling efficiency. A common method for protein denaturation in proteomics is the use of urea. Though some previous studies have used urea-based protein denaturation before post-digestion (18)O labeling, the optimal (18)O labeling conditions in this case have not been yet reported. Present study investigated the effects of urea concentration and pH on the labeling efficiency and obtained an optimized protocol. It was demonstrated that urea inhibited (18)O incorporation depending on concentration. However, a urea concentration between 1 and 2M had minimal effects on labeling. It was also demonstrated that the use of FA to quench the digestion reaction severely affected the labeling efficiency. This study revealed the reason why previous studies gave different optimal pH for labeling. They neglect the effects of different digestion conditions on the labeling conditions. Excellent labeling quality was obtained at the optimized conditions using urea 1-2 M and pH 4.5, 98.4+/-1.9% for a standard protein mixture and 97.2+/-6.2% for a complex biological sample. For a 1:1 mixture analysis of the (16)O- and (18)O-labeled peptides from the same protein sample, the average abundance ratios reached 1.05+/-0.31, demonstrating a good quantitation quality at the optimized conditions. This work will benefit other researchers who pair urea-based protein denaturation with a post-digestion (18)O labeling method. 2010 Elsevier B.V. All rights reserved.
The Optimal Timing of Stage-2-Palliation After the Norwood Operation.
Meza, James M; Hickey, Edward; McCrindle, Brian; Blackstone, Eugene; Anderson, Brett; Overman, David; Kirklin, James K; Karamlou, Tara; Caldarone, Christopher; Kim, Richard; DeCampli, William; Jacobs, Marshall; Guleserian, Kristine; Jacobs, Jeffrey P; Jaquiss, Robert
2018-01-01
The effect of the timing of stage-2-palliation (S2P) on survival through single ventricle palliation remains unknown. This study investigated the optimal timing of S2P that minimizes pre-S2P attrition and maximizes post-S2P survival. The Congenital Heart Surgeons' Society's critical left ventricular outflow tract obstruction cohort was used. Survival analysis was performed using multiphase parametric hazard analysis. Separate risk factors for death after the Norwood and after S2P were identified. Based on the multivariable models, infants were stratified as low, intermediate, or high risk. Cumulative 2-year, post-Norwood survival was predicted. Optimal timing was determined using conditional survival analysis and plotted as 2-year, post-Norwood survival versus age at S2P. A Norwood operation was performed in 534 neonates from 21 institutions. The S2P was performed in 71%, at a median age of 5.1 months (IQR: 4.3 to 6.0), and 22% died after Norwood. By 5 years after S2P, 10% of infants had died. For low- and intermediate-risk infants, performing S2P after age 3 months was associated with 89% ± 3% and 82% ± 3% 2-year survival, respectively. Undergoing an interval cardiac reoperation or moderate-severe right ventricular dysfunction before S2P were high-risk features. Among high-risk infants, 2-year survival was 63% ± 5%, and even lower when S2P was performed before age 6 months. Performing S2P after age 3 months may optimize survival of low- and intermediate-risk infants. High-risk infants are unlikely to complete three-stage palliation, and early S2P may increase their risk of mortality. We infer that early referral for cardiac transplantation may increase their chance of survival. Copyright © 2018 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
Ables, Brett
2014-01-01
Multi-stage launch vehicles with solid rocket motors (SRMs) face design optimization challenges, especially when the mission scope changes frequently. Significant performance benefits can be realized if the solid rocket motors are optimized to the changing requirements. While SRMs represent a fixed performance at launch, rapid design iterations enable flexibility at design time, yielding significant performance gains. The streamlining and integration of SRM design and analysis can be achieved with improved analysis tools. While powerful and versatile, the Solid Performance Program (SPP) is not conducive to rapid design iteration. Performing a design iteration with SPP and a trajectory solver is a labor intensive process. To enable a better workflow, SPP, the Program to Optimize Simulated Trajectories (POST), and the interfaces between them have been improved and automated, and a graphical user interface (GUI) has been developed. The GUI enables real-time visual feedback of grain and nozzle design inputs, enforces parameter dependencies, removes redundancies, and simplifies manipulation of SPP and POST's numerous options. Automating the analysis also simplifies batch analyses and trade studies. Finally, the GUI provides post-processing, visualization, and comparison of results. Wrapping legacy high-fidelity analysis codes with modern software provides the improved interface necessary to enable rapid coupled SRM ballistics and vehicle trajectory analysis. Low cost trade studies demonstrate the sensitivities of flight performance metrics to propulsion characteristics. Incorporating high fidelity analysis from SPP into vehicle design reduces performance margins and improves reliability. By flying an SRM designed with the same assumptions as the rest of the vehicle, accurate comparisons can be made between competing architectures. In summary, this flexible workflow is a critical component to designing a versatile launch vehicle model that can accommodate a volatile mission scope.
A modeling framework for optimal long-term care insurance purchase decisions in retirement planning.
Gupta, Aparna; Li, Lepeng
2004-05-01
The level of need and costs of obtaining long-term care (LTC) during retired life require that planning for it is an integral part of retirement planning. In this paper, we divide retirement planning into two phases, pre-retirement and post-retirement. On the basis of four interrelated models for health evolution, wealth evolution, LTC insurance premium and coverage, and LTC cost structure, a framework for optimal LTC insurance purchase decisions in the pre-retirement phase is developed. Optimal decisions are obtained by developing a trade-off between post-retirement LTC costs and LTC insurance premiums and coverage. Two-way branching models are used to model stochastic health events and asset returns. The resulting optimization problem is formulated as a dynamic programming problem. We compare the optimal decision under two insurance purchase scenarios: one assumes that insurance is purchased for good and other assumes it may be purchased, relinquished and re-purchased. Sensitivity analysis is performed for the retirement age.
Muscle mass and physical recovery in ICU: innovations for targeting of nutrition and exercise.
Wischmeyer, Paul E; Puthucheary, Zudin; San Millán, Iñigo; Butz, Daniel; Grocott, Michael P W
2017-08-01
We have significantly improved hospital mortality from sepsis and critical illness in last 10 years; however, over this same period we have tripled the number of 'ICU survivors' going to rehabilitation. Furthermore, as up to half the deaths in the first year following ICU admission occur post-ICU discharge, it is unclear how many of these patients ever returned home or a meaningful quality of life. For those who do survive, recent data reveals many 'ICU survivors' will suffer significant functional impairment or post-ICU syndrome (PICS). Thus, new innovative metabolic and exercise interventions to address PICS are urgently needed. These should focus on optimal nutrition and lean body mass (LBM) assessment, targeted nutrition delivery, anabolic/anticatabolic strategies, and utilization of personalized exercise intervention techniques, such as utilized by elite athletes to optimize preparation and recovery from critical care. New data for novel LBM analysis technique such as computerized tomography scan and ultrasound analysis of LBM are available showing objective measures of LBM now becoming more practical for predicting metabolic reserve and effectiveness of nutrition/exercise interventions. 13C-Breath testing is a novel technique under study to predict infection earlier and predict over-feeding and under-feeding to target nutrition delivery. New technologies utilized routinely by athletes such as muscle glycogen ultrasound also show promise. Finally, the role of personalized cardiopulmonary exercise testing to target preoperative exercise optimization and post-ICU recovery are becoming reality. New innovative techniques are demonstrating promise to target recovery from PICS utilizing a combination of objective LBM and metabolic assessment, targeted nutrition interventions, personalized exercise interventions for prehabilitation and post-ICU recovery. These interventions should provide hope that we will soon begin to create more 'survivors' and fewer victim's post-ICU care.
NASA Astrophysics Data System (ADS)
Jiang, Shan; Liu, Mei; Wang, Baojie; Jiang, Keyong; Wang, Lei
2011-11-01
Anti-lipopolysaccharide factors (ALFs) are important antimicrobial peptides that are isolated from some aquatic species. In a previous study, we isolated ALF genes from Chinese mitten crab, Eriocheir sinensis. In this study, we optimized the production of a recombinant ALF by expressing E. sinensis ALF genes in Escherichia coli maintained in shake-flasks. In particular, we focused on optimization of both the medium composition and the culture condition. Various medium components were analyzed by the Plackett-Burman design, and two significant screened factors, (NH4)2SO4 and KH2PO4, were further optimized via the central composite design (CCD). Based on the CCD analysis, we investigated the induction start-up time, the isopropylthio-D-galactoside (IPTG) concentration, the post-induction time, and the temperature by response surface methodology. We found that the highest level of ALF fusion protein was achieved in the medium containing 1.89 g/L (NH4)2SO4 and 3.18 g/L KH2PO4, with a cell optical density of 0.8 at 600 nm before induction, an IPTG concentration of 0.5 mmol/L, a post-induction temperature of 32.7°C, and a post-induction time of 4 h. Applying the whole optimization strategy using all optimal factors improved the target protein content from 6.1% (without optimization) to 13.2%. We further applied the optimized medium and conditions in high cell density cultivation, and determined that the soluble target protein constituted 10.5% of the total protein. Our identification of the economic medium composition, optimal culture conditions, and details of the fermentation process should facilitate the potential application of ALF for further research.
Using deep neural networks to augment NIF post-shot analysis
NASA Astrophysics Data System (ADS)
Humbird, Kelli; Peterson, Luc; McClarren, Ryan; Field, John; Gaffney, Jim; Kruse, Michael; Nora, Ryan; Spears, Brian
2017-10-01
Post-shot analysis of National Ignition Facility (NIF) experiments is the process of determining which simulation inputs yield results consistent with experimental observations. This analysis is typically accomplished by running suites of manually adjusted simulations, or Monte Carlo sampling surrogate models that approximate the response surfaces of the physics code. These approaches are expensive and often find simulations that match only a small subset of observables simultaneously. We demonstrate an alternative method for performing post-shot analysis using inverse models, which map directly from experimental observables to simulation inputs with quantified uncertainties. The models are created using a novel machine learning algorithm which automates the construction and initialization of deep neural networks to optimize predictive accuracy. We show how these neural networks, trained on large databases of post-shot simulations, can rigorously quantify the agreement between simulation and experiment. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
Programs To Optimize Spacecraft And Aircraft Trajectories
NASA Technical Reports Server (NTRS)
Brauer, G. L.; Petersen, F. M.; Cornick, D.E.; Stevenson, R.; Olson, D. W.
1994-01-01
POST/6D POST is set of two computer programs providing ability to target and optimize trajectories of powered or unpowered spacecraft or aircraft operating at or near rotating planet. POST treats point-mass, three-degree-of-freedom case. 6D POST treats more-general rigid-body, six-degree-of-freedom (with point masses) case. Used to solve variety of performance, guidance, and flight-control problems for atmospheric and orbital vehicles. Applications include computation of performance or capability of vehicle in ascent, or orbit, and during entry into atmosphere, simulation and analysis of guidance and flight-control systems, dispersion-type analyses and analyses of loads, general-purpose six-degree-of-freedom simulation of controlled and uncontrolled vehicles, and validation of performance in six degrees of freedom. Written in FORTRAN 77 and C language. Two machine versions available: one for SUN-series computers running SunOS(TM) (LAR-14871) and one for Silicon Graphics IRIS computers running IRIX(TM) operating system (LAR-14869).
A techno-economic assessment of grid connected photovoltaic system for hospital building in Malaysia
NASA Astrophysics Data System (ADS)
Mat Isa, Normazlina; Tan, Chee Wei; Yatim, AHM
2017-07-01
Conventionally, electricity in hospital building are supplied by the utility grid which uses mix fuel including coal and gas. Due to enhancement in renewable technology, many building shall moving forward to install their own PV panel along with the grid to employ the advantages of the renewable energy. This paper present an analysis of grid connected photovoltaic (GCPV) system for hospital building in Malaysia. A discussion is emphasized on the economic analysis based on Levelized Cost of Energy (LCOE) and total Net Present Post (TNPC) in regards with the annual interest rate. The analysis is performed using Hybrid Optimization Model for Electric Renewables (HOMER) software which give optimization and sensitivity analysis result. An optimization result followed by the sensitivity analysis also being discuss in this article thus the impact of the grid connected PV system has be evaluated. In addition, the benefit from Net Metering (NeM) mechanism also discussed.
Chan, Christian S; Rhodes, Jean E; Pérez, John E
2012-03-01
This prospective study examined the pathways by which religious involvement affected the post-disaster psychological functioning of women who survived Hurricanes Katrina and Rita. The participants were 386 low-income, predominantly Black, single mothers. The women were enrolled in the study before the hurricane, providing a rare opportunity to document changes in mental health from before to after the storm, and to assess the protective role of religious involvement over time. Results of structural equation modeling indicated that, controlling for level of exposure to the hurricanes, pre-disaster physical health, age, and number of children, pre-disaster religiousness predicted higher levels of post-disaster (1) social resources and (2) optimism and sense of purpose. The latter, but not the former, was associated with better post-disaster psychological outcome. Mediation analysis confirmed the mediating role of optimism and sense of purpose.
Rhodes, Jean E.; Pérez, John E.
2013-01-01
This prospective study examined the pathways by which religious involvement affected the post-disaster psychological functioning of women who survived Hurricanes Katrina and Rita. The participants were 386 low-income, predominantly Black, single mothers. The women were enrolled in the study before the hurricane, providing a rare opportunity to document changes in mental health from before to after the storm, and to assess the protective role of religious involvement over time. Results of structural equation modeling indicated that, controlling for level of exposure to the hurricanes, pre-disaster physical health, age, and number of children, pre-disaster religiousness predicted higher levels of post-disaster (1) social resources and (2) optimism and sense of purpose. The latter, but not the former, was associated with better post-disaster psychological outcome. Mediation analysis confirmed the mediating role of optimism and sense of purpose. PMID:21626083
Hia, Fabian; Chionh, Yok Hian; Pang, Yan Ling Joy; DeMott, Michael S; McBee, Megan E; Dedon, Peter C
2015-03-11
A major challenge in the study of mycobacterial RNA biology is the lack of a comprehensive RNA isolation method that overcomes the unusual cell wall to faithfully yield the full spectrum of non-coding RNA (ncRNA) species. Here, we describe a simple and robust procedure optimized for the isolation of total ncRNA, including 5S, 16S and 23S ribosomal RNA (rRNA) and tRNA, from mycobacteria, using Mycobacterium bovis BCG to illustrate the method. Based on a combination of mechanical disruption and liquid and solid-phase technologies, the method produces all major species of ncRNA in high yield and with high integrity, enabling direct chemical and sequence analysis of the ncRNA species. The reproducibility of the method with BCG was evident in bioanalyzer electrophoretic analysis of isolated RNA, which revealed quantitatively significant differences in the ncRNA profiles of exponentially growing and non-replicating hypoxic bacilli. The method also overcame an historical inconsistency in 5S rRNA isolation, with direct sequencing revealing a novel post-transcriptional processing of 5S rRNA to its functional form and with chemical analysis revealing seven post-transcriptional ribonucleoside modifications in the 5S rRNA. This optimized RNA isolation procedure thus provides a means to more rigorously explore the biology of ncRNA species in mycobacteria. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.
2011-04-30
a BS degree in Mathematics and an MS degree in Statistics and Financial and Actuarial Mathematics from Kiev National Taras Shevchenko University...degrees from Rutgers University in Industrial Engineering (PhD and MS) and Statistics (MS) and from Universidad Nacional Autonoma de Mexico in Actuarial ...Science. His research efforts focus on developing mathematical models for the analysis, computation, and optimization of system performance with
NASA Technical Reports Server (NTRS)
Steele, John W.; Rector, Tony; Gazda, Daniel; Lewis, John
2011-01-01
An EMU water processing kit (Airlock Coolant Loop Recovery -- A/L CLR) was developed as a corrective action to Extravehicular Mobility Unit (EMU) coolant flow disruptions experienced on the International Space Station (ISS) in May of 2004 and thereafter. A conservative duty cycle and set of use parameters for A/L CLR use and component life were initially developed and implemented based on prior analysis results and analytical modeling. Several initiatives were undertaken to optimize the duty cycle and use parameters of the hardware. Examination of post-flight samples and EMU Coolant Loop hardware provided invaluable information on the performance of the A/L CLR and has allowed for an optimization of the process. The intent of this paper is to detail the evolution of the A/L CLR hardware, efforts to optimize the duty cycle and use parameters, and the final recommendations for implementation in the post-Shuttle retirement era.
Huss, Michael; Ginsberg, Ylva; Arngrim, Torben; Philipsen, Alexandra; Carter, Katherine; Chen, Chien-Wei; Gandhi, Preetam; Kumar, Vinod
2014-09-01
In the management of attention-deficit hyperactivity disorder (ADHD) in adults it is important to recognize that individual patients respond to a wide range of methylphenidate doses. Studies with methylphenidate modified release long acting (MPH-LA) in children have reported the need for treatment optimization for improved outcomes. We report the results from a post hoc analysis of a 5-week dose optimization phase from a large randomized, placebo-controlled, multicenter 40-week study (9-week double-blind dose confirmation phase, 5-week open-label dose optimization phase, and 26-week double-blind maintenance of effect phase). Patients entering the open-label dose optimization phase initiated treatment with MPH-LA 20 mg/day; up/down titrated to their optimal dose (at which there was balance between control of symptoms and side effects) of 40, 60, or 80 mg/day in increments of 20 mg/week by week 12 or 13. Safety was assessed by monitoring the adverse events (AEs) and serious AEs. Efficacy was assessed by the Diagnostic and Statistical Manual of Mental Disorders, fourth edition, Attention-Deficit Hyperactivity Disorder Rating Scale (DSM-IV ADHD RS) and Sheehan Disability Scale (SDS) total scores. At the end of the dose confirmation phase, similar numbers of patients were treated optimally with each of the 40, 60, and 80 mg/day doses (152, 177, and 160, respectively) for MPH-LA. Mean improvement from baseline in the dose confirmation phase in total scores of DSM-IV ADHD RS and SDS were 23.5 ± 9.90 and 9.7 ± 7.36, respectively. Dose optimization with MPH-LA (40, 60, or 80 mg/day) improved treatment outcomes and was well-tolerated in adult ADHD patients.
NASA Astrophysics Data System (ADS)
La Foy, Roderick; Vlachos, Pavlos
2011-11-01
An optimally designed MLOS tomographic reconstruction algorithm for use in 3D PIV and PTV applications is analyzed. Using a set of optimized reconstruction parameters, the reconstructions produced by the MLOS algorithm are shown to be comparable to reconstructions produced by the MART algorithm for a range of camera geometries, camera numbers, and particle seeding densities. The resultant velocity field error calculated using PIV and PTV algorithms is further minimized by applying both pre and post processing to the reconstructed data sets.
Wiering, B M; Albada, A; Bensing, J M; Ausems, M G E M; van Dulmen, A M
2013-11-01
Much is unknown about the influence of dispositional optimism and affective communication on genetic counselling outcomes. This study investigated the influence of counselees' optimism on the counselees' risk perception accuracy and anxiety, while taking into account the affective communication during the first consultation for breast cancer genetic counselling. Counselees completed questionnaires measuring optimism, anxiety and the perceived risk that hereditary breast cancer runs in the family before, and anxiety and perceived risk after the first consultation. Consultations were videotaped. The duration of eye contact was measured, and verbal communication was rated using the Roter Interaction Analysis System. Less-optimistic counselees were more anxious post-visit (β = -.29; p = .00). Counsellors uttered fewer reassuring statements if counselees were more anxious (β = -.84; p = .00) but uttered more reassurance if counselees were less optimistic (β = -.76; p = .01). Counsellors expressed less empathy if counselees perceived their risk as high (β = -1.51; p = .04). An increase in the expression of reassurance was related to less post-visit anxiety (β = -.35; p = .03). More empathy was related to a greater overestimation of risk (β = .92; p = .01). Identification of a lack of optimism as a risk factor for high anxiety levels enables the adaptation of affective communication to improve genetic counselling outcomes. Because reassurance was related to less anxiety, beneficial adaptation is attainable by increasing counsellors' reassurance, if possible. Because of a lack of optimally adapted communication in this study, further research is needed to clarify how to increase counsellors' ability to adapt to counselees. Copyright © 2013 John Wiley & Sons, Ltd.
Matthews, Jennifer L; Murphy, Joy M; Carmichael, Carrie; Yang, Huiping; Tiersch, Terrence; Westerfield, Monte; Varga, Zoltan M
2018-01-25
Sperm cryopreservation is a highly efficient method for preserving genetic resources. It extends the reproductive period of males and significantly reduces costs normally associated with maintenance of live animal colonies. However, previous zebrafish (Danio rerio) cryopreservation methods have produced variable outcomes and low post-thaw fertilization rates. To improve post-thaw fertilization rates after cryopreservation, we developed a new extender and cryoprotective medium (CPM), introduced quality assessment (QA), determined the optimal cooling rate, and improved the post-thaw in vitro fertilization process. We found that the hypertonic extender E400 preserved motility of sperm held on ice for at least 6 h. We implemented QA by measuring sperm cell densities with a NanoDrop spectrophotometer and sperm motility with computer-assisted sperm analysis (CASA). We developed a CPM, RMMB, which contains raffinose, skim milk, methanol, and bicine buffer. Post-thaw motility indicated that the optimal cooling rate in two types of cryogenic vials was between 10 and 15°C/min. Test thaws from this method produced average motility of 20% ± 13% and an average post-thaw fertilization rate of 68% ± 16%.
Pesch, Georg R; Du, Fei; Baune, Michael; Thöming, Jorg
2017-02-03
Insulator-based dielectrophoresis (iDEP) is a powerful particle analysis technique based on electric field scattering at material boundaries which can be used, for example, for particle filtration or to achieve chromatographic separation. Typical devices consist of microchannels containing an array of posts but large scale application was also successfully tested. Distribution and magnitude of the generated field gradients and thus the possibility to trap particles depends apart from the applied field strength on the material combination between post and surrounding medium and on the boundary shape. In this study we simulate trajectories of singe particles under the influence of positive DEP that are flowing past one single post due to an external fluid flow. We analyze the influence of key parameters (excitatory field strength, fluid flow velocity, particle size, distance from the post, post size, and cross-sectional geometry) on two benchmark criteria, i.e., a critical initial distance from the post so that trapping still occurs (at fixed particle size) and a critical minimum particle size necessary for trapping (at fixed initial distance). Our approach is fundamental and not based on finding an optimal geometry of insulating structures but rather aims to understand the underlying phenomena of particle trapping. A sensitivity analysis reveals that electric field strength and particle size have the same impact, as have fluid flow velocity and post dimension. Compared to these parameters the geometry of the post's cross-section (i.e. rhomboidal or elliptical with varying width-to-height or aspect ratio) has a rather small influence but can be used to optimize the trapping efficiency at a specific distance. We hence found an ideal aspect ratio for trapping for each base geometry and initial distance to the tip which is independent of the other parameters. As a result we present design criteria which we believe to be a valuable addition to the existing literature. Copyright © 2016 Elsevier B.V. All rights reserved.
Enhanced post wash retention of combed DNA molecules by varying multiple combing parameters.
Yadav, Hemendra; Sharma, Pulkit
2017-11-01
Recent advances in genomics have created a need for efficient techniques for deciphering information hidden in various genomes. Single molecule analysis is one such technique to understand molecular processes at single molecule level. Fiber- FISH performed with the help of DNA combing can help us in understanding genetic rearrangements and changes in genome at single DNA molecule level. For performing Fiber-FISH we need high retention of combed DNA molecules post wash as Fiber-FISH requires profuse washing. We optimized combing process involving combing solution, method of DNA mounting on glass slides and coating of glass slides to enhance post-wash retention of DNA molecules. It was found that average number of DNA molecules observed post-wash per field of view was maximum with our optimized combing solution. APTES coated glass slides showed lesser retention than PEI surface but fluorescent intensity was higher in case of APTES coated surface. Capillary method used to mount DNA on glass slides also showed lesser retention but straight DNA molecules were observed as compared to force flow method. Copyright © 2017 Elsevier Inc. All rights reserved.
Parallelization of Program to Optimize Simulated Trajectories (POST3D)
NASA Technical Reports Server (NTRS)
Hammond, Dana P.; Korte, John J. (Technical Monitor)
2001-01-01
This paper describes the parallelization of the Program to Optimize Simulated Trajectories (POST3D). POST3D uses a gradient-based optimization algorithm that reaches an optimum design point by moving from one design point to the next. The gradient calculations required to complete the optimization process, dominate the computational time and have been parallelized using a Single Program Multiple Data (SPMD) on a distributed memory NUMA (non-uniform memory access) architecture. The Origin2000 was used for the tests presented.
Flow analysis and design optimization methods for nozzle afterbody of a hypersonic vehicle
NASA Technical Reports Server (NTRS)
Baysal, Oktay
1991-01-01
This report summarizes the methods developed for the aerodynamic analysis and the shape optimization of the nozzle-afterbody section of a hypersonic vehicle. Initially, exhaust gases were assumed to be air. Internal-external flows around a single scramjet module were analyzed by solving the three dimensional Navier-Stokes equations. Then, exhaust gases were simulated by a cold mixture of Freon and Argon. Two different models were used to compute these multispecies flows as they mixed with the hypersonic airflow. Surface and off-surface properties were successfully compared with the experimental data. In the second phase of this project, the Aerodynamic Design Optimization with Sensitivity analysis (ADOS) was developed. Pre and post optimization sensitivity coefficients were derived and used in this quasi-analytical method. These coefficients were also used to predict inexpensively the flow field around a changed shape when the flow field of an unchanged shape was given. Starting with totally arbitrary initial afterbody shapes, independent computations were converged to the same optimum shape, which rendered the maximum axial thrust.
USDA-ARS?s Scientific Manuscript database
Thermogravimetric analysis (TGA) was used to investigate thermal and catalytic pyrolysis of waste plastics such as prescription bottles (polypropylene/PP), high density polyethylene, landfill liners (polyethylene/PE), packing materials (polystyrene/PS), and foams (polyurethane/PU) into crude plastic...
Global gene expression analysis by combinatorial optimization.
Ameur, Adam; Aurell, Erik; Carlsson, Mats; Westholm, Jakub Orzechowski
2004-01-01
Generally, there is a trade-off between methods of gene expression analysis that are precise but labor-intensive, e.g. RT-PCR, and methods that scale up to global coverage but are not quite as quantitative, e.g. microarrays. In the present paper, we show how how a known method of gene expression profiling (K. Kato, Nucleic Acids Res. 23, 3685-3690 (1995)), which relies on a fairly small number of steps, can be turned into a global gene expression measurement by advanced data post-processing, with potentially little loss of accuracy. Post-processing here entails solving an ancillary combinatorial optimization problem. Validation is performed on in silico experiments generated from the FANTOM data base of full-length mouse cDNA. We present two variants of the method. One uses state-of-the-art commercial software for solving problems of this kind, the other a code developed by us specifically for this purpose, released in the public domain under GPL license.
Optimized endogenous post-stratification in forest inventories
Paul L. Patterson
2012-01-01
An example of endogenous post-stratification is the use of remote sensing data with a sample of ground data to build a logistic regression model to predict the probability that a plot is forested and using the predicted probabilities to form categories for post-stratification. An optimized endogenous post-stratified estimator of the proportion of forest has been...
Program to Optimize Simulated Trajectories (POST). Volume 2: Utilization manual
NASA Technical Reports Server (NTRS)
Bauer, G. L.; Cornick, D. E.; Habeger, A. R.; Petersen, F. M.; Stevenson, R.
1975-01-01
Information pertinent to users of the program to optimize simulated trajectories (POST) is presented. The input required and output available is described for each of the trajectory and targeting/optimization options. A sample input listing and resulting output are given.
Program to Optimize Simulated Trajectories (POST). Volume 3: Programmer's manual
NASA Technical Reports Server (NTRS)
Brauer, G. L.; Cornick, D. E.; Habeger, A. R.; Petersen, F. M.; Stevenson, R.
1975-01-01
Information pertinent to the programmer and relating to the program to optimize simulated trajectories (POST) is presented. Topics discussed include: program structure and logic, subroutine listings and flow charts, and internal FORTRAN symbols. The POST core requirements are summarized along with program macrologic.
An Economic Analysis of Instructional Language
ERIC Educational Resources Information Center
Lien, Donald; Wang, Yaqin
2013-01-01
This paper constructs a simple two-tier education framework to analyze the effectiveness of multiple language instruction. Suppose that the government attempts to maximize the average post-education productivity. It is shown that the optimal education policy requires different languages of instruction be adopted in the education system. The…
Optimal mechanical design of anatomical post-systems for endodontic restoration.
Maceri, Franco; Martignoni, Marco; Vairo, Giuseppe
2009-02-01
This paper analyses the mechanical behaviour of a new reinforced anatomical post-systems (RAPS) for endodontic restoration. The composite restorative material (CRM) completely fills the root canal (as do the commonly used cast metal posts) and multiple prefabricated composite posts (PCPs) are employed as reinforcements. Numerical simulations based on 3D linearly elastic finite element models under parafunctional loads were performed in order to investigate the influence of the stiffness of the CRM and of the number of PCPs. Periodontal ligament effects were taken into account using a discretised anisotropic nonlinearly elastic spring system, and the full discrete model was validated by comparing the resulting stress fields with those obtained with conventional restorations (cast gold-alloy post, homogeneous anatomical post and cemented single PCP) and with the natural tooth. Analysis of the results shows that stresses at the cervical/middle region decrease as CRM stiffness increases and, for large and irregular root cavities that apical stress peaks disappear when multiple PCPs are used. Accordingly, from a mechanical point of view, an optimal RAPS will use multiple PCPs when CRM stiffness is equal to or at most twice that of the dentin. This restorative solution minimises stress differences with respect to the natural tooth, mechanical inhomogeneities, stress concentrations on healthy tissues, volumes subject to shrinkage phenomena, fatigue effects and risks of both root fracture and adhesive/cohesive interfacial failure.
Advances in POST2 End-to-End Descent and Landing Simulation for the ALHAT Project
NASA Technical Reports Server (NTRS)
Davis, Jody L.; Striepe, Scott A.; Maddock, Robert W.; Hines, Glenn D.; Paschall, Stephen, II; Cohanim, Babak E.; Fill, Thomas; Johnson, Michael C.; Bishop, Robert H.; DeMars, Kyle J.;
2008-01-01
Program to Optimize Simulated Trajectories II (POST2) is used as a basis for an end-to-end descent and landing trajectory simulation that is essential in determining design and integration capability and system performance of the lunar descent and landing system and environment models for the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project. The POST2 simulation provides a six degree-of-freedom capability necessary to test, design and operate a descent and landing system for successful lunar landing. This paper presents advances in the development and model-implementation of the POST2 simulation, as well as preliminary system performance analysis, used for the testing and evaluation of ALHAT project system models.
Albini, Fabio; Xiaoqiu Liu; Torlasco, Camilla; Soranna, Davide; Faini, Andrea; Ciminaghi, Renata; Celsi, Ada; Benedetti, Matteo; Zambon, Antonella; di Rienzo, Marco; Parati, Gianfranco
2016-08-01
Uncontrolled hypertension is largely attributed to unsatisfactory doctor's engagement in its optimal management and to poor patients' compliance to therapeutic interventions. ICT and mobile Health solutions might improve these conditions, being widely available and providing highly effective communication strategies. To evaluate whether ICT and mobile Health tools are able to improve hypertension control by improving doctors' engagement and by increasing patients' education and involvement, and their compliance to lifestyle modification and prescribed drug therapy. In a pilot study, we have included 690 treated hypertensive patients with uncontrolled office blood pressure (BP), consecutively recruited by 9 general practitioners over 3 months. Patients were alternatively assigned to routine management based on repeated office visits or to an integrated ICT-based Patients Optimal Strategy for Treatment (POST) system including Home BP monitoring teletransmission, a dedicated web-based platform for patients' management by physicians (Misuriamo platform), and a smartphone mobile application (Eurohypertension APP, E-APP), over a follow-up of 6 months. BP values, demographic and clinical data were collected at baseline and at all follow-up visits (at least two). BP control and cardiovascular risk level have been evaluated at the beginning and at the end of the study. 89 patients did not complete the follow-up, thus data analysis was carried out in 601 of them (303 patients in the POST group and 298 in the control group). Office BP control (<;149/90 mmHg) was 40.0% in control group, and 72.3% in POST group at 6 month follow-up. At the same time Home BP control (<;135/85 mmHg average of 6 days) in POST group was 87.5%. this pilot study suggests that ICT based tools might be effective in improving hypertension management, implementing positive patients' involvement with better adherence to treatment prescriptions and providing the physicians with dynamic control of patients' home BP measurements, resulting in lesser clinical inertia.
FE analysis of conceptual hybrid composite endodontic post designs in anterior teeth.
Gloria, Antonio; Maietta, Saverio; Martorelli, Massimo; Lanzotti, Antonio; Watts, David C; Ausiello, Pietro
2018-04-24
To assess conceptual designs of dental posts consisting of polyetherimide (PEI) reinforced with carbon (C) and glass (G) glass fibers in endodontically treated anterior teeth. 3D tessellated CAD and geometric models of endodontically treated anterior teeth were generated from Micro-CT scan images. Model C-G/PEI composite posts with different Young's moduli were analyzed by Finite Element (FE) methods post A (57.7GPa), post B (31.6GPa), post C (from 57.7 to 9.0GPa in the coronal-apical direction). A load of 50N was applied at 45° to the longitudinal axis of the tooth, acting on the palatal surface of the crown. The maximum principal stress distribution was determined along the post and at the interface between the post and the surrounding structure. Post C, with Young's modulus decreasing from 57.7 to 9.0GPa in the coronal-apical direction, reduced the maximum principal stress distribution in the restored tooth. Post C gave reduced stress and the most uniform stress distribution with no stress concentration, compared to the other C-G/PEI composite posts. The FE analysis confirmed the ability of the functionally graded post to dissipate stress from the coronal to the apical end. Hence actual (physical) C-G/PEI posts could permit optimization of stress distributions in endodontically treated anterior teeth. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.
Automation of POST Cases via External Optimizer and "Artificial p2" Calculation
NASA Technical Reports Server (NTRS)
Dees, Patrick D.; Zwack, Mathew R.; Michelson, Diane K.
2017-01-01
During conceptual design speed and accuracy are often at odds. Specifically in the realm of launch vehicles, optimizing the ascent trajectory requires a larger pool of analytical power and expertise. Experienced analysts working on familiar vehicles can produce optimal trajectories in a short time frame, however whenever either "experienced" or "familiar " is not applicable the optimization process can become quite lengthy. In order to construct a vehicle agnostic method an established global optimization algorithm is needed. In this work the authors develop an "artificial" error term to map arbitrary control vectors to non-zero error by which a global method can operate. Two global methods are compared alongside Design of Experiments and random sampling and are shown to produce comparable results to analysis done by a human expert.
Program to Optimize Simulated Trajectories (POST). Volume 1: Formulation manual
NASA Technical Reports Server (NTRS)
Brauer, G. L.; Cornick, D. E.; Habeger, A. R.; Petersen, F. M.; Stevenson, R.
1975-01-01
A general purpose FORTRAN program for simulating and optimizing point mass trajectories (POST) of aerospace vehicles is described. The equations and the numerical techniques used in the program are documented. Topics discussed include: coordinate systems, planet model, trajectory simulation, auxiliary calculations, and targeting and optimization.
2014-04-01
During last years in foreign countries there was widely introduced tactic of early activation of cardio-surgery patients. Necessary components of this methodical approach are early finishing of post-operation artificial respiration and extubation of trachea, shortening of time spending in intensive therapy till 1 day and sign out from stationary after 5 days. As a result of reducing hospitalization period, the curation costs are reduced significantly. Goal of this research was the analysis of methods of anesthesia that allow early extubation and activation after cardio-surgery interventions. There were analyzed data of protocols of anesthesia and post-operation periods for 270 patients. It was concluded that applied methods of anesthesia ensure adequate protection from operation stress and allow reduce time of post-operation artificial respiration, early activation of patients without reducing level of their safety. It was also proved that application of any type of anesthesia medicines is not influencing the temp of post-operation activation. Conducted research is proving the advisability of using tactic of early activation of patients after heart operations and considers this as a tool for optimization of cardio-surgery curation.
;Optimizing post-combustion CO2 capture in response to volatile electricity prices." International , S.M., H.L. Chalmers, M.E. Webber, C.W. King, and J. Gibbins. "Comparing post-combustion CO2 ., G.T. Rochelle, and M.E. Webber. "Optimal operation of flexible post- combustion CO2 capture in
Wen, Zhuoyu; Xu, Xiaomeng; Xu, Lili; Yang, Lian; Xu, Xiaohui; Zhu, Juehua; Wu, Li; Jiang, Yongjun; Liu, Xinfeng
2017-06-15
Intraluminal middle cerebral artery occlusion (MCAO) is the most widely used model of stroke. We aimed to predict the outcome of MCAO using a combination of fine behavioural tests for the prediction of unsuccessful surgery in mice leading to no infarction, haemorrhage and unexpected death. MCAO was performed on adult mice under the guidance of laser-Doppler flowmetry (LDF) to warrant a decrease in regional cerebral blood flow (rCBF) in the MCA territory. Four outcomes of MCAO were defined according to histological analysis: infarction, no infarction, haemorrhage and unexpected death (death within 24h post-surgery). Fine behavioural tests including the rotarod, modified neurological severity score (mNSS), Clark general and Clark focal tests were performed separately at 6h, 12h and 24h post-stroke. A total of 94 mice were included in the analysis. The infarction rate associated with MCAO was 58.5% (55/94). After optimization of the timing and behavioural tests, we found that higher Clark focal (>17.5) or higher mNSS scores (>10) were markedly related to early death, whereas a lower mNSS score (<3.5) was indicative of a tendency to show no infarction at 6h post-stroke. After 24h post-stroke, there was a positive correlation between the infarct volume and Clark focal results. Behavioural tests could help to predict the outcomes in the MCAO mouse model. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.
Determination of Ignitable Liquids in Fire Debris: Direct Analysis by Electronic Nose
Ferreiro-González, Marta; Barbero, Gerardo F.; Palma, Miguel; Ayuso, Jesús; Álvarez, José A.; Barroso, Carmelo G.
2016-01-01
Arsonists usually use an accelerant in order to start or accelerate a fire. The most widely used analytical method to determine the presence of such accelerants consists of a pre-concentration step of the ignitable liquid residues followed by chromatographic analysis. A rapid analytical method based on headspace-mass spectrometry electronic nose (E-Nose) has been developed for the analysis of Ignitable Liquid Residues (ILRs). The working conditions for the E-Nose analytical procedure were optimized by studying different fire debris samples. The optimized experimental variables were related to headspace generation, specifically, incubation temperature and incubation time. The optimal conditions were 115 °C and 10 min for these two parameters. Chemometric tools such as hierarchical cluster analysis (HCA) and linear discriminant analysis (LDA) were applied to the MS data (45–200 m/z) to establish the most suitable spectroscopic signals for the discrimination of several ignitable liquids. The optimized method was applied to a set of fire debris samples. In order to simulate post-burn samples several ignitable liquids (gasoline, diesel, citronella, kerosene, paraffin) were used to ignite different substrates (wood, cotton, cork, paper and paperboard). A full discrimination was obtained on using discriminant analysis. This method reported here can be considered as a green technique for fire debris analyses. PMID:27187407
Chocolate milk: a post-exercise recovery beverage for endurance sports.
Pritchett, Kelly; Pritchett, Robert
2012-01-01
An optimal post-exercise nutrition regimen is fundamental for ensuring recovery. Therefore, research has aimed to examine post-exercise nutritional strategies for enhanced training stimuli. Chocolate milk has become an affordable recovery beverage for many athletes, taking the place of more expensive commercially available recovery beverages. Low-fat chocolate milk consists of a 4:1 carbohydrate:protein ratio (similar to many commercial recovery beverages) and provides fluids and sodium to aid in post-workout recovery. Consuming chocolate milk (1.0-1.5•g•kg(-1) h(-1)) immediately after exercise and again at 2 h post-exercise appears to be optimal for exercise recovery and may attenuate indices of muscle damage. Future research should examine the optimal amount, timing, and frequency of ingestion of chocolate milk on post-exercise recovery measures including performance, indices of muscle damage, and muscle glycogen resynthesis. Copyright © 2012 S. Karger AG, Basel.
Verification of a Constraint Force Equation Methodology for Modeling Multi-Body Stage Separation
NASA Technical Reports Server (NTRS)
Tartabini, Paul V.; Roithmayr, Carlos; Toniolo, Matthew D.; Karlgaard, Christopher; Pamadi, Bandu N.
2008-01-01
This paper discusses the verification of the Constraint Force Equation (CFE) methodology and its implementation in the Program to Optimize Simulated Trajectories II (POST2) for multibody separation problems using three specially designed test cases. The first test case involves two rigid bodies connected by a fixed joint; the second case involves two rigid bodies connected with a universal joint; and the third test case is that of Mach 7 separation of the Hyper-X vehicle. For the first two cases, the POST2/CFE solutions compared well with those obtained using industry standard benchmark codes, namely AUTOLEV and ADAMS. For the Hyper-X case, the POST2/CFE solutions were in reasonable agreement with the flight test data. The CFE implementation in POST2 facilitates the analysis and simulation of stage separation as an integral part of POST2 for seamless end-to-end simulations of launch vehicle trajectories.
Achieving optimal growth: lessons from simple metabolic modules
NASA Astrophysics Data System (ADS)
Goyal, Sidhartha; Chen, Thomas; Wingreen, Ned
2009-03-01
Metabolism is a universal property of living organisms. While the metabolic network itself has been well characterized, the logic of its regulation remains largely mysterious. Recent work has shown that growth rates of microorganisms, including the bacterium Escherichia coli, correlate well with optimal growth rates predicted by flux-balance analysis (FBA), a constraint-based computational method. How difficult is it for cells to achieve optimal growth? Our analysis of representative metabolic modules drawn from real metabolism shows that, in all cases, simple feedback inhibition allows nearly optimal growth. Indeed, product-feedback inhibition is found in every biosynthetic pathway and constitutes about 80% of metabolic regulation. However, we find that product-feedback systems designed to approach optimal growth necessarily produce large pool sizes of metabolites, with potentially detrimental effects on cells via toxicity and osmotic imbalance. Interestingly, the sizes of metabolite pools can be strongly restricted if the feedback inhibition is ultrasensitive (i.e. with high Hill coefficient). The need for ultrasensitive mechanisms to limit pool sizes may therefore explain some of the ubiquitous, puzzling complexity found in metabolic feedback regulation at both the transcriptional and post-transcriptional levels.
Pre-liver transplant psychosocial evaluation predicts post-transplantation outcomes.
Benson, Ariel A; Rowe, Mina; Eid, Ahmad; Bluth, Keren; Merhav, Hadar; Khalaileh, Abed; Safadi, Rifaat
2018-08-01
Psychosocial factors greatly impact the course of patients throughout the liver transplantation process. A retrospective chart review was performed of patients who underwent liver transplantation at Hadassah-Hebrew University Medical Center between 2002 and 2012. A composite psychosocial score was computed based on the patient's pre-transplant evaluation. Patients were divided into two groups based on compliance, support and insight: Optimal psychosocial score and Non-optimal psychosocial score. Post-liver transplantation survival and complication rates were evaluated. Out of 100 patients who underwent liver transplantation at the Hadassah-Hebrew University Medical Center between 2002 and 2012, 93% had a complete pre-liver transplant psychosocial evaluation in the medical record performed by professional psychologists and social workers. Post-liver transplantation survival was significantly higher in the Optimal group (85%) as compared to the Non-optimal group (56%, p = .002). Post-liver transplantation rate of renal failure was significantly lower in the Optimal group. No significant differences were observed between the groups in other post-transplant complications. A patient's psychosocial status may impact outcomes following transplantation as inferior psychosocial grades were associated with lower overall survival and increased rates of complications. Pre-liver transplant psychosocial evaluations are an important tool to help predict survival following transplantation.
Huffman, Jeff C.; Beale, Eleanor E.; Celano, Christopher M.; Beach, Scott R.; Belcher, Arianna M.; Moore, Shannon V.; Suarez, Laura; Motiwala, Shweta R.; Gandhi, Parul U.; Gaggin, Hanna; Januzzi, James L.
2015-01-01
Background Positive psychological constructs, such as optimism, are associated with beneficial health outcomes. However, no study has separately examined the effects of multiple positive psychological constructs on behavioral, biological, and clinical outcomes after an acute coronary syndrome (ACS). Accordingly, we aimed to investigate associations of baseline optimism and gratitude with subsequent physical activity, prognostic biomarkers, and cardiac rehospitalizations in post-ACS patients. Methods and Results Participants were enrolled during admission for ACS and underwent assessments at baseline (2 weeks post-ACS) and follow-up (6 months later). Associations between baseline positive psychological constructs and subsequent physical activity/biomarkers were analyzed using multivariable linear regression. Associations between baseline positive constructs and 6-month rehospitalizations were assessed via multivariable Cox regression. Overall, 164 participants enrolled and completed the baseline 2-week assessments. Baseline optimism was significantly associated with greater physical activity at 6 months (n=153; β=102.5; 95% confidence interval [13.6-191.5]; p=.024), controlling for baseline activity and sociodemographic, medical, and negative psychological covariates. Baseline optimism was also associated with lower rates of cardiac readmissions at 6 months (N=164), controlling for age, gender, and medical comorbidity (hazard ratio=.92; 95% confidence interval [.86-.98]; p=.006). There were no significant relationships between optimism and biomarkers. Gratitude was minimally associated with post-ACS outcomes. Conclusions Post-ACS optimism, but not gratitude, was prospectively and independently associated with superior physical activity and fewer cardiac readmissions. Whether interventions that target optimism can successfully increase optimism or improve cardiovascular outcomes in post-ACS patients is not yet known, but can be tested in future studies. Clinical Trial Registration URL: http://www.clinicaltrials.gov. Unique identifier: NCT01709669. PMID:26646818
Huffman, Jeff C; Beale, Eleanor E; Celano, Christopher M; Beach, Scott R; Belcher, Arianna M; Moore, Shannon V; Suarez, Laura; Motiwala, Shweta R; Gandhi, Parul U; Gaggin, Hanna K; Januzzi, James L
2016-01-01
Positive psychological constructs, such as optimism, are associated with beneficial health outcomes. However, no study has separately examined the effects of multiple positive psychological constructs on behavioral, biological, and clinical outcomes after an acute coronary syndrome (ACS). Accordingly, we aimed to investigate associations of baseline optimism and gratitude with subsequent physical activity, prognostic biomarkers, and cardiac rehospitalizations in post-ACS patients. Participants were enrolled during admission for ACS and underwent assessments at baseline (2 weeks post-ACS) and follow-up (6 months later). Associations between baseline positive psychological constructs and subsequent physical activity/biomarkers were analyzed using multivariable linear regression. Associations between baseline positive constructs and 6-month rehospitalizations were assessed via multivariable Cox regression. Overall, 164 participants enrolled and completed the baseline 2-week assessments. Baseline optimism was significantly associated with greater physical activity at 6 months (n=153; β=102.5; 95% confidence interval, 13.6-191.5; P=0.024), controlling for baseline activity and sociodemographic, medical, and negative psychological covariates. Baseline optimism was also associated with lower rates of cardiac readmissions at 6 months (n=164), controlling for age, sex, and medical comorbidity (hazard ratio, 0.92; 95% confidence interval, [0.86-0.98]; P=0.006). There were no significant relationships between optimism and biomarkers. Gratitude was minimally associated with post-ACS outcomes. Post-ACS optimism, but not gratitude, was prospectively and independently associated with superior physical activity and fewer cardiac readmissions. Whether interventions that target optimism can successfully increase optimism or improve cardiovascular outcomes in post-ACS patients is not yet known, but can be tested in future studies. URL: http://www.clinicaltrials.gov. Unique identifier: NCT01709669. © 2015 American Heart Association, Inc.
Fernández-Martín, José L; Dusso, Adriana; Martínez-Camblor, Pablo; Dionisi, Maria P; Floege, Jürgen; Ketteler, Markus; London, Gérard; Locatelli, Francesco; Górriz, José L; Rutkowski, Boleslaw; Bos, Willem-Jan; Tielemans, Christian; Martin, Pierre-Yves; Wüthrich, Rudolf P; Pavlovic, Drasko; Benedik, Miha; Rodríguez-Puyol, Diego; Carrero, Juan J; Zoccali, Carmine; Cannata-Andía, Jorge B
2018-05-07
Serum phosphate is a key parameter in the management of chronic kidney disease-mineral and bone disorder (CKD-MBD). The timing of phosphate measurement is not standardized in the current guidelines. Since the optimal range of these biomarkers may vary depending on the duration of the interdialytic interval, in this analysis of the Current management of secondary hyperparathyroidism: a multicentre observational study (COSMOS), we assessed the influence of a 2- (midweek) or 3-day (post-weekend) dialysis interval for blood withdrawal on serum levels of CKD-MBD biomarkers and their association with mortality risk. The COSMOS cohort (6797 patients, CKD Stage 5D) was divided into two groups depending upon midweek or post-weekend blood collection. Univariate and multivariate Cox's models adjusted hazard ratios (HRs) by demographics and comorbidities, treatments and biochemical parameters from a patient/centre database collected at baseline and every 6 months for 3 years. There were no differences in serum calcium or parathyroid hormone levels between midweek and post-weekend patients. However, in post-weekend patients, the mean serum phosphate levels were higher compared with midweek patients (5.5 ± 1.4 versus 5.2 ± 1.4 mg/dL, P < 0.001). Also, the range of serum phosphate with the lowest mortality risk [HR ≤ 1.1; midweek: 3.5-4.9 mg/dL (95% confidence interval, CI: 2.9-5.2 mg/dL); post-weekend: 3.8-5.7 mg/dL (95% CI: 3.0-6.4 mg/dL)] showed significant differences in the upper limit (P = 0.021). Midweek and post-weekend serum phosphate levels and their target ranges associated with the lowest mortality risk differ. Thus, clinical guidelines should consider the timing of blood withdrawal when recommending optimal target ranges for serum phosphate and therapeutic strategies for phosphate control.
Augmenting Parametric Optimal Ascent Trajectory Modeling with Graph Theory
NASA Technical Reports Server (NTRS)
Dees, Patrick D.; Zwack, Matthew R.; Edwards, Stephen; Steffens, Michael
2016-01-01
It has been well documented that decisions made in the early stages of Conceptual and Pre-Conceptual design commit up to 80% of total Life-Cycle Cost (LCC) while engineers know the least about the product they are designing [1]. Once within Preliminary and Detailed design however, making changes to the design becomes far more difficult to enact in both cost and schedule. Primarily this has been due to a lack of detailed data usually uncovered later during the Preliminary and Detailed design phases. In our current budget-constrained environment, making decisions within Conceptual and Pre-Conceptual design which minimize LCC while meeting requirements is paramount to a program's success. Within the arena of launch vehicle design, optimizing the ascent trajectory is critical for minimizing the costs present within such concerns as propellant, aerodynamic, aeroheating, and acceleration loads while meeting requirements such as payload delivered to a desired orbit. In order to optimize the vehicle design its constraints and requirements must be known, however as the design cycle proceeds it is all but inevitable that the conditions will change. Upon that change, the previously optimized trajectory may no longer be optimal, or meet design requirements. The current paradigm for adjusting to these updates is generating point solutions for every change in the design's requirements [2]. This can be a tedious, time-consuming task as changes in virtually any piece of a launch vehicle's design can have a disproportionately large effect on the ascent trajectory, as the solution space of the trajectory optimization problem is both non-linear and multimodal [3]. In addition, an industry standard tool, Program to Optimize Simulated Trajectories (POST), requires an expert analyst to produce simulated trajectories that are feasible and optimal [4]. In a previous publication the authors presented a method for combatting these challenges [5]. In order to bring more detailed information into Conceptual and Pre-Conceptual design, knowledge of the effects originating from changes to the vehicle must be calculated. In order to do this, a model capable of quantitatively describing any vehicle within the entire design space under consideration must be constructed. This model must be based upon analysis of acceptable fidelity, which in this work comes from POST. Design space interrogation can be achieved with surrogate modeling, a parametric, polynomial equation representing a tool. A surrogate model must be informed by data from the tool with enough points to represent the solution space for the chosen number of variables with an acceptable level of error. Therefore, Design Of Experiments (DOE) is used to select points within the design space to maximize information gained on the design space while minimizing number of data points required. To represent a design space with a non-trivial number of variable parameters the number of points required still represent an amount of work which would take an inordinate amount of time via the current paradigm of manual analysis, and so an automated method was developed. The best practices of expert trajectory analysts working within NASA Marshall's Advanced Concepts Office (ACO) were implemented within a tool called multiPOST. These practices include how to use the output data from a previous run of POST to inform the next, determining whether a trajectory solution is feasible from a real-world perspective, and how to handle program execution errors. The tool was then augmented with multiprocessing capability to enable analysis on multiple trajectories simultaneously, allowing throughput to scale with available computational resources. In this update to the previous work the authors discuss issues with the method and solutions.
Ould-Brahim, Fares; Sarma, Sailendra Nath; Syal, Charvi; Lu, Kevin Jiaqi; Seegobin, Matthew; Carter, Anthony; Jeffers, Matthew S; Doré, Carole; Stanford, William; Corbett, Dale; Wang, Jing
2018-06-12
While transplantation of hiPSC-derived neural stem cells (hiPSC-NSCs) shows therapeutic potential in animal stroke models, major concerns for translating hiPSC therapy to the clinic are efficacy and safety. Therefore, there is a demand to develop an optimal strategy to enhance the engraftment and regenerative capacity of transplanted hiPSC-NSCs in order to produce fully differentiated neural cells to replace lost brain tissues. Metformin, an FDA approved drug, is an optimal neuroregenerative agent that not only promotes NSC proliferation but also drives NSC towards differentiation. In this regard, we hypothesize that preconditioning of hiPSC-NSCs with metformin before transplantation into the stroke-damaged brain will improve engraftment and regenerative capabilities of hiPSC-NSCs, ultimately enhancing functional recovery. Here we show that pretreatment of hiPSC-NSCs with metformin enhances the proliferation and differentiation of hiPSC-NSCs in culture. Furthermore, metformin-preconditioned hiPSC-NSCs show increased engraftment 1-week post-transplant in a rat endothelin-1 focal ischemic stroke model. In addition, metformin preconditioned cell grafts exhibit increased survival compared to naïve cell grafts at 7-week post-transplant. Analysis of the grafts demonstrates that metformin preconditioning enhances the differentiation of hiPSC-NSCs. As an outcome, rats receiving metformin preconditioned cells display accelerated gross motor recovery and reduced infarct volume. These studies represent a vital step forward in the optimization of hiPSC-NSC based transplantation to promote post-stroke recovery.
NASA Astrophysics Data System (ADS)
Striepe, Scott Allen
The objectives of this research were to develop a reconstruction capability using the Program to Optimize Simulated Trajectories II (POST2), apply this capability to reconstruct the Huygens Titan probe entry, descent, and landing (EDL) trajectory, evaluate the newly developed POST2 reconstruction module, analyze the reconstructed trajectory, and assess the pre-flight simulation models used for Huygens EDL simulation. An extended Kalman filter (EKF) module was developed and integrated into POST2 to enable trajectory reconstruction (especially when using POST2-based mission specific simulations). Several validation cases, ranging from a single, constant parameter estimate to multivariable estimation cases similar to an actual mission flight, were executed to test the POST2 reconstruction module. Trajectory reconstruction of the Huygens entry probe at Titan was accomplished using accelerometer measurements taken during flight to adjust an estimated state (e.g., position, velocity, parachute drag, wind velocity, etc.) in a POST2-based simulation developed to support EDL analyses and design prior to entry. Although the main emphasis of the trajectory reconstruction was to evaluate models used in the NASA pre-entry trajectory simulation, the resulting reconstructed trajectory was also assessed to provide an independent evaluation of the ESA result. Major findings from this analysis include: Altitude profiles from this analysis agree well with other NASA and ESA results but not with Radar data, whereas a scale factor of about 0.93 would bring the radar measurements into compliance with these results; entry capsule aerodynamics predictions (axial component only) were well within 3-sigma bounds established pre-flight for most of the entry when compared to reconstructed values; Main parachute drag of 9% to 19% above ESA model was determined from the reconstructed trajectory; based on the tilt sensor and accelerometer data, the conclusion from this assessment was that the probe was tilted about 10 degrees during the Drogue parachute phase.
Potgieter, Danielle; Simmers, Dale; Ryan, Lisa; Biccard, Bruce M; Lurati-Buse, Giovanna A; Cardinale, Daniela M; Chong, Carol P W; Cnotliwy, Miloslaw; Farzi, Sylvia I; Jankovic, Radmilo J; Lim, Wen Kwang; Mahla, Elisabeth; Manikandan, Ramaswamy; Oscarsson, Anna; Phy, Michael P; Rajagopalan, Sriram; Van Gaal, William J; Waliszek, Marek; Rodseth, Reitze N
2015-08-01
N-terminal fragment B-type natriuretic peptide (NT-proBNP) prognostic utility is commonly determined post hoc by identifying a single optimal discrimination threshold tailored to the individual study population. The authors aimed to determine how using these study-specific post hoc thresholds impacts meta-analysis results. The authors conducted a systematic review of studies reporting the ability of preoperative NT-proBNP measurements to predict the composite outcome of all-cause mortality and nonfatal myocardial infarction at 30 days after noncardiac surgery. Individual patient-level data NT-proBNP thresholds were determined using two different methodologies. First, a single combined NT-proBNP threshold was determined for the entire cohort of patients, and a meta-analysis conducted using this single threshold. Second, study-specific thresholds were determined for each individual study, with meta-analysis being conducted using these study-specific thresholds. The authors obtained individual patient data from 14 studies (n = 2,196). Using a single NT-proBNP cohort threshold, the odds ratio (OR) associated with an increased NT-proBNP measurement was 3.43 (95% CI, 2.08 to 5.64). Using individual study-specific thresholds, the OR associated with an increased NT-proBNP measurement was 6.45 (95% CI, 3.98 to 10.46). In smaller studies (<100 patients) a single cohort threshold was associated with an OR of 5.4 (95% CI, 2.27 to 12.84) as compared with an OR of 14.38 (95% CI, 6.08 to 34.01) for study-specific thresholds. Post hoc identification of study-specific prognostic biomarker thresholds artificially maximizes biomarker predictive power, resulting in an amplification or overestimation during meta-analysis of these results. This effect is accentuated in small studies.
Supersonic Flight Dynamics Test 1 - Post-Flight Assessment of Simulation Performance
NASA Technical Reports Server (NTRS)
Dutta, Soumyo; Bowes, Angela L.; Striepe, Scott A.; Davis, Jody L.; Queen, Eric M.; Blood, Eric M.; Ivanov, Mark C.
2015-01-01
NASA's Low Density Supersonic Decelerator (LDSD) project conducted its first Supersonic Flight Dynamics Test (SFDT-1) on June 28, 2014. Program to Optimize Simulated Trajectories II (POST2) was one of the flight dynamics codes used to simulate and predict the flight performance and Monte Carlo analysis was used to characterize the potential flight conditions experienced by the test vehicle. This paper compares the simulation predictions with the reconstructed trajectory of SFDT-1. Additionally, off-nominal conditions seen during flight are modeled in post-flight simulations to find the primary contributors that reconcile the simulation with flight data. The results of these analyses are beneficial for the pre-flight simulation and targeting of the follow-on SFDT flights currently scheduled for summer 2015.
Evaluation of Nutritional Status Post Laparoscopic Sleeve Gastrectomy-5-Year Outcomes.
Al-Mutawa, Aliaa; Al-Sabah, Salman; Anderson, Alfred Kojo; Al-Mutawa, Mohammad
2018-06-01
Obesity is considered a public health problem and has led to advancements in bariatric surgery. Laparoscopic sleeve gastrectomy (LSG) had become the most performed procedure worldwide; however, its consequences on nutritional status in the short and long term are of concern. A retrospective analysis of medical records and bariatric database of patients who underwent LSG from October 2008-September 2015 at Al-Amiri Hospital, Kuwait, was performed. Data regarding nutritional status along with demographic data were collected over a 5-year follow-up period. One thousand seven hundred ninety-three patients comprising of 74% females and 26% males were included. The greatest % total body weight loss (%TBWL) was at 18 months post-LSG (33%), corresponding to a % excess weight loss (%EWL) of 73.8%. With regard to nutritional status, vitamin B1 showed a significant drop at 3-5 years post-op in comparison to pre-op value, but stayed within the normal range throughout the study. Red blood cells count, hemoglobin, and hematocrit also showed a significant drop starting from 6 months post-op until the fifth year of follow-up. On the other hand, vitamins B6 and B12 showed a significant increase at 6 months post-op and decreased afterwards, but did not reach pre-op values. Vitamin D also showed a significant increase throughout the study period from deficient value at the pre-op time, but remained insufficient. Albumin, transferrin, folate, ferritin, iron, and vitamin B2 showed no significant changes at 5 years post-LSG compared to pre-op values. Little is known about the nutritional status and optimal nutritional care plan post-LSG, especially in the longer term. Nutritional deficiencies were prevalent prior and post-LSG. Some of the nutritional parameters improved and even reached the abnormal high level post-LSG. These observations highlight the importance of pre- and post-operative nutritional assessment and tailored supplementation to ensure optimal nutritional status.
Ghosh, A K; Ganguli, S; Bose, K S
1982-12-01
The metabolic demand, using the relationship between speed and energy cost, and the optimal speed of walking, estimated by means of speed and energy cost per unit distance travelled, were studied in 16 post-polio subjects with lower limb affliction and 20 normal subjects with sedentary habits. It was observed that the post-polio subjects consumed higher energy than the normal persons at each walking speed between 0.28 and 1.26 m/s. The optimal speed of walking in post-polio subjects was lower than that of the normal persons and was associated with a higher energy demand per unit distance travelled. It was deduced that the post-polio subjects. not having used any assistive devices for a long time, have acquired severe degrees of disability which not only hindered their normal gait but also demanded extra energy from them.
Development of WRF-ROI system by incorporating eigen-decomposition
NASA Astrophysics Data System (ADS)
Kim, S.; Noh, N.; Song, H.; Lim, G.
2011-12-01
This study presents the development of WRF-ROI system, which is the implementation of Retrospective Optimal Interpolation (ROI) to the Weather Research and Forecasting model (WRF). ROI is a new data assimilation algorithm introduced by Song et al. (2009) and Song and Lim (2009). The formulation of ROI is similar with that of Optimal Interpolation (OI), but ROI iteratively assimilates an observation set at a post analysis time into a prior analysis, possibly providing the high quality reanalysis data. ROI method assimilates the data at post analysis time using perturbation method (Errico and Raeder, 1999) without adjoint model. In previous study, ROI method is applied to Lorenz 40-variable model (Lorenz, 1996) to validate the algorithm and to investigate the capability. It is therefore required to apply this ROI method into a more realistic and complicated model framework such as WRF. In this research, the reduced-rank formulation of ROI is used instead of a reduced-resolution method. The computational costs can be reduced due to the eigen-decomposition of background error covariance in the reduced-rank method. When single profile of observations is assimilated in the WRF-ROI system by incorporating eigen-decomposition, the analysis error tends to be reduced if compared with the background error. The difference between forecast errors with assimilation and without assimilation is obviously increased as time passed, which means the improvement of forecast error by assimilation.
NASA Astrophysics Data System (ADS)
Pawełczyk, Katarzyna
2018-01-01
The development of mining of rock raw materials in Poland has significantly contributed to economic growth and the quality of life of local communities. However, mining activity, besides a number of positive effects, also implies broadly understood changes in the environment and the formation of brownfields. Reclamation and redevelopment of post-industrial areas, and especially post-mining areas, is currently a huge environmental and socio-economic challenge. Revitalization of post-mining areas is particularly important for small towns and municipalities, where mining was one of the main pillars of development and prosperity. An example of such a municipality is Siewierz in Silesian Voivodship. In the paper analysis the conditions have been conducted and the concept of revitalization of dolomite quarry Górnicze Zakłady Dolomitowe S.A. has been proposed. The AHP method has been used to analyse and select the optimal method of revitalization. As a result of the analysis, the concept of multidirectional revitalization with socially, economically and environmentally beneficial functions has been created, maximizing the potential of the quarry.
NASA Technical Reports Server (NTRS)
Patrick, Sean; Oliver, Emerson
2018-01-01
One of the SLS Navigation System's key performance requirements is a constraint on the payload system's delta-v allocation to correct for insertion errors due to vehicle state uncertainty at payload separation. The SLS navigation team has developed a Delta-Delta-V analysis approach to assess the effect on trajectory correction maneuver (TCM) design needed to correct for navigation errors. This approach differs from traditional covariance analysis based methods and makes no assumptions with regard to the propagation of the state dynamics. This allows for consideration of non-linearity in the propagation of state uncertainties. The Delta-Delta-V analysis approach re-optimizes perturbed SLS mission trajectories by varying key mission states in accordance with an assumed state error. The state error is developed from detailed vehicle 6-DOF Monte Carlo analysis or generated using covariance analysis. These perturbed trajectories are compared to a nominal trajectory to determine necessary TCM design. To implement this analysis approach, a tool set was developed which combines the functionality of a 3-DOF trajectory optimization tool, Copernicus, and a detailed 6-DOF vehicle simulation tool, Marshall Aerospace Vehicle Representation in C (MAVERIC). In addition to delta-v allocation constraints on SLS navigation performance, SLS mission requirement dictate successful upper stage disposal. Due to engine and propellant constraints, the SLS Exploration Upper Stage (EUS) must dispose into heliocentric space by means of a lunar fly-by maneuver. As with payload delta-v allocation, upper stage disposal maneuvers must place the EUS on a trajectory that maximizes the probability of achieving a heliocentric orbit post Lunar fly-by considering all sources of vehicle state uncertainty prior to the maneuver. To ensure disposal, the SLS navigation team has developed an analysis approach to derive optimal disposal guidance targets. This approach maximizes the state error covariance prior to the maneuver to develop and re-optimize a nominal disposal maneuver (DM) target that, if achieved, would maximize the potential for successful upper stage disposal. For EUS disposal analysis, a set of two tools was developed. The first considers only the nominal pre-disposal maneuver state, vehicle constraints, and an a priori estimate of the state error covariance. In the analysis, the optimal nominal disposal target is determined. This is performed by re-formulating the trajectory optimization to consider constraints on the eigenvectors of the error ellipse applied to the nominal trajectory. A bisection search methodology is implemented in the tool to refine these dispersions resulting in the maximum dispersion feasible for successful disposal via lunar fly-by. Success is defined based on the probability that the vehicle will not impact the lunar surface and will achieve a characteristic energy (C3) relative to the Earth such that it is no longer in the Earth-Moon system. The second tool propagates post-disposal maneuver states to determine the success of disposal for provided trajectory achieved states. This is performed using the optimized nominal target within the 6-DOF vehicle simulation. This paper will discuss the application of the Delta-Delta-V analysis approach for performance evaluation as well as trajectory re-optimization so as to demonstrate the system's capability in meeting performance constraints. Additionally, further discussion of the implementation of assessing disposal analysis will be provided.
Wrinkle-free design of thin membrane structures using stress-based topology optimization
NASA Astrophysics Data System (ADS)
Luo, Yangjun; Xing, Jian; Niu, Yanzhuang; Li, Ming; Kang, Zhan
2017-05-01
Thin membrane structures would experience wrinkling due to local buckling deformation when compressive stresses are induced in some regions. Using the stress criterion for membranes in wrinkled and taut states, this paper proposed a new stress-based topology optimization methodology to seek the optimal wrinkle-free design of macro-scale thin membrane structures under stretching. Based on the continuum model and linearly elastic assumption in the taut state, the optimization problem is defined as to maximize the structural stiffness under membrane area and principal stress constraints. In order to make the problem computationally tractable, the stress constraints are reformulated into equivalent ones and relaxed by a cosine-type relaxation scheme. The reformulated optimization problem is solved by a standard gradient-based algorithm with the adjoint-variable sensitivity analysis. Several examples with post-bulking simulations and experimental tests are given to demonstrate the effectiveness of the proposed optimization model for eliminating stress-related wrinkles in the novel design of thin membrane structures.
NASA Technical Reports Server (NTRS)
Lugo, Rafael A.; Shidner, Jeremy D.; Powell, Richard W.; Marsh, Steven M.; Hoffman, James A.; Litton, Daniel K.; Schmitt, Terri L.
2017-01-01
The Program to Optimize Simulated Trajectories II (POST2) has been continuously developed for over 40 years and has been used in many flight and research projects. Recently, there has been an effort to improve the POST2 architecture by promoting modularity, flexibility, and ability to support multiple simultaneous projects. The purpose of this paper is to provide insight into the development of trajectory simulation in POST2 by describing methods and examples of various improved models for a launch vehicle liftoff and ascent.
Solving iTOUGH2 simulation and optimization problems using the PEST protocol
DOE Office of Scientific and Technical Information (OSTI.GOV)
Finsterle, S.A.; Zhang, Y.
2011-02-01
The PEST protocol has been implemented into the iTOUGH2 code, allowing the user to link any simulation program (with ASCII-based inputs and outputs) to iTOUGH2's sensitivity analysis, inverse modeling, and uncertainty quantification capabilities. These application models can be pre- or post-processors of the TOUGH2 non-isothermal multiphase flow and transport simulator, or programs that are unrelated to the TOUGH suite of codes. PEST-style template and instruction files are used, respectively, to pass input parameters updated by the iTOUGH2 optimization routines to the model, and to retrieve the model-calculated values that correspond to observable variables. We summarize the iTOUGH2 capabilities and demonstratemore » the flexibility added by the PEST protocol for the solution of a variety of simulation-optimization problems. In particular, the combination of loosely coupled and tightly integrated simulation and optimization routines provides both the flexibility and control needed to solve challenging inversion problems for the analysis of multiphase subsurface flow and transport systems.« less
2015-12-01
found with Tukey’s HSD post hoc analysis. Several target genes such as Oct4, Sox2, TGFB, and Col1A1 were generally up-regulated in all sections. In...expression analysis from the Aim 1 samples presented several upregulated target genes such as Oct4, Sox2, TGFB, and Col1A1 in all sections. No...TGFB, and Col1A1 . • Data from cellular analysis, histology, gene expression analysis and microCT are being assembled for the predictive model
Buckling analysis and test correlation of hat stiffened panels for hypersonic vehicles
NASA Technical Reports Server (NTRS)
Percy, Wendy C.; Fields, Roger A.
1990-01-01
The paper discusses the design, analysis, and test of hat stiffened panels subjected to a variety of thermal and mechanical load conditions. The panels were designed using data from structural optimization computer codes and finite element analysis. Test methods included the grid shadow moire method and a single gage force stiffness method. The agreement between the test data and analysis provides confidence in the methods that are currently being used to design structures for hypersonic vehicles. The agreement also indicates that post buckled strength may potentially be used to reduce the vehicle weight.
Hyper-X Stage Separation Trajectory Validation Studies
NASA Technical Reports Server (NTRS)
Tartabini, Paul V.; Bose, David M.; McMinn, John D.; Martin, John G.; Strovers, Brian K.
2003-01-01
An independent twelve degree-of-freedom simulation of the X-43A separation trajectory was created with the Program to Optimize Simulated trajectories (POST II). This simulation modeled the multi-body dynamics of the X-43A and its booster and included the effect of two pyrotechnically actuated pistons used to push the vehicles apart as well as aerodynamic interaction forces and moments between the two vehicles. The simulation was developed to validate trajectory studies conducted with a 14 degree-of-freedom simulation created early in the program using the Automatic Dynamic Analysis of Mechanics Systems (ADAMS) simulation software. The POST simulation was less detailed than the official ADAMS-based simulation used by the Project, but was simpler, more concise and ran faster, while providing similar results. The increase in speed provided by the POST simulation provided the Project with an alternate analysis tool. This tool was ideal for performing separation control logic trade studies that required the running of numerous Monte Carlo trajectories.
Optimizing Soft Tissue Management and Spacer Design in Segmental Bone Defects
2015-10-01
were found with Tukey’s HSD post hoc analysis. Several target genes such as Oct4, Sox2, TGFB, and Col1A1 were generally up-regulated in all sections...samples presented several upregulated target genes such as Oct4, Sox2, TGFB, and Col1A1 in all sections. No significant main effects were found for
Executive dysfunction post-stroke: an insight into the perspectives of physiotherapists.
Hayes, Sara; Donnellan, Claire; Stokes, Emma
2015-01-01
To gain an understanding of physiotherapy practice in relation to executive dysfunction (ED) post-stroke. Three focus groups were conducted using semi-structured interview schedules to highlight how ED post-stroke was understood by 12 physiotherapists with greater than 1 year of experience working in the area of stroke care. The focus group data were analysed using qualitative data analysis. The themes extracted from the data on physiotherapists' self-reported knowledge of ED post-stroke were: physiotherapists' lack of knowledge of ED post-stroke; current physiotherapy practice regarding ED post-stroke; the negative impact of ED on physiotherapy rehabilitation post-stroke and the future learning needs of physiotherapists regarding ED post-stroke. Current results demonstrate that ED has negative implications for physiotherapy rehabilitation post-stroke. Although further interdisciplinary research is warranted, the present results suggest that physiotherapists should be aware of the presence of ED in people post-stroke and develop strategies to minimise the impact of ED on physiotherapy rehabilitation. Implications for Rehabilitation Physiotherapists report a lack of knowledge of ED post-stroke and a requirement for future learning and training regarding the optimal management of people with ED undergoing physiotherapy rehabilitation post-stroke. ED has negative implications for physiotherapy rehabilitation post-stroke and physiotherapists should be aware of the presence of ED in people post-stroke and develop strategies to minimise the impact of ED on physiotherapy rehabilitation.
Military engine computational structures technology
NASA Technical Reports Server (NTRS)
Thomson, Daniel E.
1992-01-01
Integrated High Performance Turbine Engine Technology Initiative (IHPTET) goals require a strong analytical base. Effective analysis of composite materials is critical to life analysis and structural optimization. Accurate life prediction for all material systems is critical. User friendly systems are also desirable. Post processing of results is very important. The IHPTET goal is to double turbine engine propulsion capability by the year 2003. Fifty percent of the goal will come from advanced materials and structures, the other 50 percent will come from increasing performance. Computer programs are listed.
Lachowsky, Nathan; Hawkins, Blake W; Jollimore, Jody; Baharuddin, Fahmy; Hogg, Robert S
2018-01-01
Background Social media is used by community-based organizations (CBOs) to promote the well-being of gay and bisexual men (GBM). However, few studies have quantified which factors facilitate the diffusion of health content tailored for sexual minorities. Objective The aim of this study was to identify post characteristics that can be leveraged to optimize the health promotion efforts of CBOs on Facebook. Methods The Facebook application programming interface was used to collect 5 years’ of posts shared across 10 Facebook pages administered by Vancouver-based CBOs promoting GBM health. Network analysis assessed basic indicators of network structure. Content analyses were conducted using informatics-based approaches. Hierarchical negative binomial regression of post engagement data was used to identify meaningful covariates of engagement. Results In total, 14,071 posts were shared and 21,537 users engaged with these posts. Most users (n=13,315) engaged only once. There was moderate correlation between the number of posts and the number of CBOs users engaged with (r=.53, P<.001). Higher user engagement was positively associated with positive sentiment, sharing multimedia, and posting about pre-exposure prophylaxis, stigma, and mental health. Engagement was negatively associated with asking questions, posting about dating, and sharing posts during or after work (versus before). Conclusions Results highlight the existence of a core group of Facebook users who facilitate diffusion. Factors associated with greater user engagement present CBOs with a number of strategies for improving the diffusion of health content. PMID:29625953
Cao, Wenhua; Lim, Gino; Li, Xiaoqiang; Li, Yupeng; Zhu, X. Ronald; Zhang, Xiaodong
2014-01-01
The purpose of this study is to investigate the feasibility and impact of incorporating deliverable monitor unit (MU) constraints into spot intensity optimization in intensity modulated proton therapy (IMPT) treatment planning. The current treatment planning system (TPS) for IMPT disregards deliverable MU constraints in the spot intensity optimization (SIO) routine. It performs a post-processing procedure on an optimized plan to enforce deliverable MU values that are required by the spot scanning proton delivery system. This procedure can create a significant dose distribution deviation between the optimized and post-processed deliverable plans, especially when small spot spacings are used. In this study, we introduce a two-stage linear programming (LP) approach to optimize spot intensities and constrain deliverable MU values simultaneously, i.e., a deliverable spot intensity optimization (DSIO) model. Thus, the post-processing procedure is eliminated and the associated optimized plan deterioration can be avoided. Four prostate cancer cases at our institution were selected for study and two parallel opposed beam angles were planned for all cases. A quadratic programming (QP) based model without MU constraints, i.e., a conventional spot intensity optimization (CSIO) model, was also implemented to emulate the commercial TPS. Plans optimized by both the DSIO and CSIO models were evaluated for five different settings of spot spacing from 3 mm to 7 mm. For all spot spacings, the DSIO-optimized plans yielded better uniformity for the target dose coverage and critical structure sparing than did the CSIO-optimized plans. With reduced spot spacings, more significant improvements in target dose uniformity and critical structure sparing were observed in the DSIO- than in the CSIO-optimized plans. Additionally, better sparing of the rectum and bladder was achieved when reduced spacings were used for the DSIO-optimized plans. The proposed DSIO approach ensures the deliverability of optimized IMPT plans that take into account MU constraints. This eliminates the post-processing procedure required by the TPS as well as the resultant deteriorating effect on ultimate dose distributions. This approach therefore allows IMPT plans to adopt all possible spot spacings optimally. Moreover, dosimetric benefits can be achieved using smaller spot spacings. PMID:23835656
A study on characteristics of retrospective optimal interpolation with WRF testbed
NASA Astrophysics Data System (ADS)
Kim, S.; Noh, N.; Lim, G.
2012-12-01
This study presents the application of retrospective optimal interpolation (ROI) with Weather Research and Forecasting model (WRF). Song et al. (2009) suggest ROI method which is an optimal interpolation (OI) that gradually assimilates observations over the analysis window for variance-minimum estimate of an atmospheric state at the initial time of the analysis window. Song and Lim (2011) improve the method by incorporating eigen-decomposition and covariance inflation. ROI method assimilates the data at post analysis time using perturbation method (Errico and Raeder, 1999) without adjoint model. In this study, ROI method is applied to WRF model to validate the algorithm and to investigate the capability. The computational costs for ROI can be reduced due to the eigen-decomposition of background error covariance. Using the background error covariance in eigen-space, 1-profile assimilation experiment is performed. The difference between forecast errors with assimilation and without assimilation is obviously increased as time passed, which means the improvement of forecast error by assimilation. The characteristics and strength/weakness of ROI method are investigated by conducting the experiments with other data assimilation method.
Jonker, Willem; Clarijs, Bas; de Witte, Susannah L; van Velzen, Martin; de Koning, Sjaak; Schaap, Jaap; Somsen, Govert W; Kool, Jeroen
2016-09-02
Gas chromatography (GC) is a superior separation technique for many compounds. However, fractionation of a GC eluate for analyte isolation and/or post-column off-line analysis is not straightforward, and existing platforms are limited in the number of fractions that can be collected. Moreover, aerosol formation may cause serious analyte losses. Previously, our group has developed a platform that resolved these limitations of GC fractionation by post-column infusion of a trap solvent prior to continuous small-volume fraction collection in a 96-wells plate (Pieke et al., 2013 [17]). Still, this GC fractionation set-up lacked a chemical detector for the on-line recording of chromatograms, and the introduction of trap solvent resulted in extensive peak broadening for late-eluting compounds. This paper reports advancements to the fractionation platform allowing flame ionization detection (FID) parallel to high-resolution collection of a full GC chromatograms in up to 384 nanofractions of 7s each. To this end, a post-column split was incorporated which directs part of the eluate towards FID. Furthermore, a solvent heating device was developed for stable delivery of preheated/vaporized trap solvent, which significantly reduced band broadening by post-column infusion. In order to achieve optimal analyte trapping, several solvents were tested at different flow rates. The repeatability of the optimized GC fraction collection process was assessed demonstrating the possibility of up-concentration of isolated analytes by repetitive analyses of the same sample. The feasibility of the improved GC fractionation platform for bioactivity screening of toxic compounds was studied by the analysis of a mixture of test pesticides, which after fractionation were subjected to a post-column acetylcholinesterase (AChE) assay. Fractions showing AChE inhibition could be unambiguously correlated with peaks from the parallel-recorded FID chromatogram. Copyright © 2016 Elsevier B.V. All rights reserved.
Weight optimal design of lateral wing upper covers made of composite materials
NASA Astrophysics Data System (ADS)
Barkanov, Evgeny; Eglītis, Edgars; Almeida, Filipe; Bowering, Mark C.; Watson, Glenn
2016-09-01
The present investigation is devoted to the development of a new optimal design of lateral wing upper covers made of advanced composite materials, with special emphasis on closer conformity of the developed finite element analysis and operational requirements for aircraft wing panels. In the first stage, 24 weight optimization problems based on linear buckling analysis were solved for the laminated composite panels with three types of stiffener, two stiffener pitches and four load levels, taking into account manufacturing, reparability and damage tolerance requirements. In the second stage, a composite panel with the best weight/design performance from the previous study was verified by nonlinear buckling analysis and optimization to investigate the effect of shear and fuel pressure on the performance of stiffened panels, and their behaviour under skin post-buckling. Three rib-bay laminated composite panels with T-, I- and HAT-stiffeners were modelled with ANSYS, NASTRAN and ABAQUS finite element codes to study their buckling behaviour as a function of skin and stiffener lay-ups, stiffener height, stiffener top and root width. Owing to the large dimension of numerical problems to be solved, an optimization methodology was developed employing the method of experimental design and response surface technique. Optimal results obtained in terms of cross-sectional areas were verified successfully using ANSYS and ABAQUS shared-node models and a NASTRAN rigid-linked model, and were used later to estimate the weight of the Advanced Low Cost Aircraft Structures (ALCAS) lateral wing upper cover.
NASA Technical Reports Server (NTRS)
Brauer, G. L.; Habeger, A. R.; Stevenson, R.
1974-01-01
The basic equations and models used in a computer program (6D POST) to optimize simulated trajectories with six degrees of freedom were documented. The 6D POST program was conceived as a direct extension of the program POST, which dealt with point masses, and considers the general motion of a rigid body with six degrees of freedom. It may be used to solve a wide variety of atmospheric flight mechanics and orbital transfer problems for powered or unpowered vehicles operating near a rotating oblate planet. Its principal features are: an easy to use NAMELIST type input procedure, an integrated set of Flight Control System (FCS) modules, and a general-purpose discrete parameter targeting and optimization capability. It was written in FORTRAN 4 for the CDC 6000 series computers.
van Montfort, Eveline; Denollet, Johan; Widdershoven, Jos; Kupper, Nina
2016-09-01
In cardiac patients, positive psychological factors have been associated with improved medical and psychological outcomes. The current study examined the interrelation between and independence of multiple positive and negative psychological constructs. Furthermore, the potential added predictive value of positive psychological functioning regarding the prediction of patients' treatment adherence and participation in cardiac rehabilitation (CR) was investigated. 409 percutaneous coronary intervention (PCI) patients were included (mean age = 65.6 ± 9.5; 78% male). Self-report questionnaires were administered one month post-PCI. Positive psychological constructs included positive affect (GMS) and optimism (LOT-R); negative constructs were depression (PHQ-9, BDI), anxiety (GAD-7) and negative affect (GMS). Six months post-PCI self-reported general adherence (MOS) and CR participation were determined. Factor Analysis (Oblimin rotation) revealed two components (r = − 0.56), reflecting positive and negative psychological constructs. Linear regression analyses showed that in unadjusted analyses both optimism and positive affect were associated with better general treatment adherence at six months (p < 0.05). In adjusted analyses, optimism's predictive values remained, independent of sex, age, PCI indication, depression and anxiety. Univariate logistic regression analysis showed that in patients with a cardiac history, positive affect was significantly associated with CR participation. After controlling for multiple covariates, this relation was no longer significant. Positive and negative constructs should be considered as two distinct dimensions. Positive psychological constructs (i.e. optimism) may be of incremental value to negative psychological constructs in predicting patients' treatment adherence. A more complete view of a patients' psychological functioning will open new avenues for treatment. Additional research is needed to investigate the relationship between positive psychological factors and other cardiac outcomes, such as cardiac events and mortality.
Electrospray Post-Ionization Mass Spectrometry of Electrosurgical Aerosols
NASA Astrophysics Data System (ADS)
Guenther, Sabine; Schäfer, Karl-Christian; Balog, Júlia; Dénes, Júlia; Majoros, Tamás; Albrecht, Katalin; Tóth, Miklós; Spengler, Bernhard; Takáts, Zoltán
2011-11-01
The feasibility of electrospray (ES) ionization of aerosols generated by electrosurgical disintegration methods was investigated. Although electrosurgery itself was demonstrated to produce gaseous ions, post-ionization methods were implemented to enhance the ion yield, especially in those cases when the ion current produced by the applied electrosurgical method is not sufficient for MS analysis. Post-ionization was implemented by mounting an ES emitter onto a Venturi pump, which is used for ion transfer. The effect of various parameters including geometry, high voltage setting, flow parameters, and solvent composition was investigated in detail. Experimental setups were optimized accordingly. ES post-ionization was found to yield spectra similar to those obtained by the REIMS technique, featuring predominantly lipid-type species. Signal enhancement was 20- to 50-fold compared with electrosurgical disintegration in positive mode, while no improvement was observed in negative mode. ES post-ionization was also demonstrated to allow the detection of non-lipid type species in the electrosurgical aerosol, including drug molecules. Since the tissue specificity of the MS data was preserved in the ES post-ionization setup, feasibility of tissue identification was demonstrated using different electrosurgical methods.
Evolutionary Bi-objective Optimization for Bulldozer and Its Blade in Soil Cutting
NASA Astrophysics Data System (ADS)
Sharma, Deepak; Barakat, Nada
2018-02-01
An evolutionary optimization approach is adopted in this paper for simultaneously achieving the economic and productive soil cutting. The economic aspect is defined by minimizing the power requirement from the bulldozer, and the soil cutting is made productive by minimizing the time of soil cutting. For determining the power requirement, two force models are adopted from the literature to quantify the cutting force on the blade. Three domain-specific constraints are also proposed, which are limiting the power from the bulldozer, limiting the maximum force on the bulldozer blade and achieving the desired production rate. The bi-objective optimization problem is solved using five benchmark multi-objective evolutionary algorithms and one classical optimization technique using the ɛ-constraint method. The Pareto-optimal solutions are obtained with the knee-region. Further, the post-optimal analysis is performed on the obtained solutions to decipher relationships among the objectives and decision variables. Such relationships are later used for making guidelines for selecting the optimal set of input parameters. The obtained results are then compared with the experiment results from the literature that show a close agreement among them.
Integrated Arrival and Departure Schedule Optimization Under Uncertainty
NASA Technical Reports Server (NTRS)
Xue, Min; Zelinski, Shannon
2014-01-01
In terminal airspace, integrating arrivals and departures with shared waypoints provides the potential of improving operational efficiency by allowing direct routes when possible. Incorporating stochastic evaluation as a post-analysis process of deterministic optimization, and imposing a safety buffer in deterministic optimization, are two ways to learn and alleviate the impact of uncertainty and to avoid unexpected outcomes. This work presents a third and direct way to take uncertainty into consideration during the optimization. The impact of uncertainty was incorporated into cost evaluations when searching for the optimal solutions. The controller intervention count was computed using a heuristic model and served as another stochastic cost besides total delay. Costs under uncertainty were evaluated using Monte Carlo simulations. The Pareto fronts that contain a set of solutions were identified and the trade-off between delays and controller intervention count was shown. Solutions that shared similar delays but had different intervention counts were investigated. The results showed that optimization under uncertainty could identify compromise solutions on Pareto fonts, which is better than deterministic optimization with extra safety buffers. It helps decision-makers reduce controller intervention while achieving low delays.
Meza, James M; Hickey, Edward J; Blackstone, Eugene H; Jaquiss, Robert D B; Anderson, Brett R; Williams, William G; Cai, Sally; Van Arsdell, Glen S; Karamlou, Tara; McCrindle, Brian W
2017-10-31
In infants requiring 3-stage single-ventricle palliation for hypoplastic left heart syndrome, attrition after the Norwood procedure remains significant. The effect of the timing of stage 2 palliation (S2P), a physician-modifiable factor, on long-term survival is not well understood. We hypothesized that an optimal interval between the Norwood and S2P that both minimizes pre-S2P attrition and maximizes post-S2P survival exists and is associated with individual patient characteristics. The National Institutes of Health/National Heart, Lung, and Blood Institute Pediatric Heart Network Single Ventricle Reconstruction Trial public data set was used. Transplant-free survival (TFS) was modeled from (1) Norwood to S2P and (2) S2P to 3 years by using parametric hazard analysis. Factors associated with death or heart transplantation were determined for each interval. To account for staged procedures, risk-adjusted, 3-year, post-Norwood TFS (the probability of TFS at 3 years given survival to S2P) was calculated using parametric conditional survival analysis. TFS from the Norwood to S2P was first predicted. TFS after S2P to 3 years was then predicted and adjusted for attrition before S2P by multiplying by the estimate of TFS to S2P. The optimal timing of S2P was determined by generating nomograms of risk-adjusted, 3-year, post-Norwood, TFS versus the interval from the Norwood to S2P. Of 547 included patients, 399 survived to S2P (73%). Of the survivors to S2P, 349 (87%) survived to 3-year follow-up. The median interval from the Norwood to S2P was 5.1 (interquartile range, 4.1-6.0) months. The risk-adjusted, 3-year, TFS was 68±7%. A Norwood-S2P interval of 3 to 6 months was associated with greatest 3-year TFS overall and in patients with few risk factors. In patients with multiple risk factors, TFS was severely compromised, regardless of the timing of S2P and most severely when S2P was performed early. No difference in the optimal timing of S2P existed when stratified by shunt type. In infants with few risk factors, progressing to S2P at 3 to 6 months after the Norwood procedure was associated with maximal TFS. Early S2P did not rescue patients with greater risk factor burdens. Instead, referral for heart transplantation may offer their best chance at long-term survival. URL: https://www.clinicaltrials.gov. Unique identifier: NCT00115934. © 2017 American Heart Association, Inc.
The role of melatonin in post-partum psychosis and depression associated with bipolar disorder.
Anderson, George
2010-11-01
Recent data has highlighted the association of a bipolar disorder (BD) with an increased risk of post-partum psychosis and depression. It is suggested that genetic- and environmental-induced decrease in the levels of melatonin in BD contributes to post-partum disorders. Melatonin may also have some efficacy in the treatment of BD, especially in decreasing the side-effects associated with lithium and the neuroleptics. It is proposed that the optimization of melatonin levels, perhaps in conjunction with optimized vitamin D3 level, would decrease post-partum psychosis and depression associated with BD.
Utility of coupling nonlinear optimization methods with numerical modeling software
DOE Office of Scientific and Technical Information (OSTI.GOV)
Murphy, M.J.
1996-08-05
Results of using GLO (Global Local Optimizer), a general purpose nonlinear optimization software package for investigating multi-parameter problems in science and engineering is discussed. The package consists of the modular optimization control system (GLO), a graphical user interface (GLO-GUI), a pre-processor (GLO-PUT), a post-processor (GLO-GET), and nonlinear optimization software modules, GLOBAL & LOCAL. GLO is designed for controlling and easy coupling to any scientific software application. GLO runs the optimization module and scientific software application in an iterative loop. At each iteration, the optimization module defines new values for the set of parameters being optimized. GLO-PUT inserts the new parametermore » values into the input file of the scientific application. GLO runs the application with the new parameter values. GLO-GET determines the value of the objective function by extracting the results of the analysis and comparing to the desired result. GLO continues to run the scientific application over and over until it finds the ``best`` set of parameters by minimizing (or maximizing) the objective function. An example problem showing the optimization of material model is presented (Taylor cylinder impact test).« less
Effects of optimism on recovery and mental health after a tornado outbreak.
Carbone, Eric G; Echols, Erin Thomas
2017-05-01
Dispositional optimism, a stable expectation that good things will happen, has been shown to improve health outcomes in a wide range of contexts, but very little research has explored the impact of optimism on post-disaster health and well-being. Data for this study come from the Centers for Disease Control and Prevention's Public health systems and mental health community recovery (PHSMHCR) Survey. Participants included 3216 individuals living in counties affected by the April 2011 tornado outbreak in Mississippi and Alabama. This study assesses the effect of dispositional optimism on post-disaster recovery and mental health. Dispositional optimism was found to have a positive effect on personal recovery and mental health after the disaster. Furthermore, it moderated the relationship between level of home damage and personal recovery as well as the relationship between home damage and post-traumatic stress disorder (PTSD), with stronger effects for those with increased levels of home damage. The utility of screening for optimism is discussed, along with the potential for interventions to increase optimism as a means of mitigating adverse mental health effects and improving the recovery of individuals affected by disasters and other traumatic events.
Effects of optimism on recovery and mental health after a tornado outbreak
Carbone, Eric G.; Echols, Erin Thomas
2017-01-01
Objective Dispositional optimism, a stable expectation that good things will happen, has been shown to improve health outcomes in a wide range of contexts, but very little research has explored the impact of optimism on post-disaster health and well-being. Design Data for this study come from the Centers for Disease Control and Prevention’s Public health systems and mental health community recovery (PHSMHCR) Survey. Participants included 3216 individuals living in counties affected by the April 2011 tornado outbreak in Mississippi and Alabama. Main outcome measures This study assesses the effect of dispositional optimism on post-disaster recovery and mental health. Results Dispositional optimism was found to have a positive effect on personal recovery and mental health after the disaster. Furthermore, it moderated the relationship between level of home damage and personal recovery as well as the relationship between home damage and post-traumatic stress disorder (PTSD), with stronger effects for those with increased levels of home damage. Conclusions The utility of screening for optimism is discussed, along with the potential for interventions to increase optimism as a means of mitigating adverse mental health effects and improving the recovery of individuals affected by disasters and other traumatic events. PMID:28156138
Kang, Jung Julie; Reiter, Robert; Steinberg, Michael; King, Christopher R.
2015-01-01
PURPOSE Integrating ultra-sensitive PSA (uPSA) into surveillance of high-risk patients following radical prostatectomy (RP) potentially optimizes management by correctly identifying actual recurrences, promoting an early salvage strategy and minimizing overtreatment. The power of uPSA following surgery to identify eventual biochemical failures is tested. PATIENTS AND METHODS From 1991–2013, 247 high-risk patients with a median follow-up was 44 months after RP were identified (extraprostatic extension and/or positive margin). Surgical technique, initial PSA (iPSA), pathology and post-op PSA were analyzed. The uPSA assay threshold was 0.01 ng/mL. Conventional biochemical relapse (cBCR) was defined as PSA ≥0.2 ng/mL. Kaplan Meier and Cox multivariate analyses (MVA) compared uPSA recurrence vs. cBCR rates. RESULTS Sensitivity analysis identified uPSA ≥0.03 as the optimal threshold identifying recurrence. First post-op uPSA ≥0.03, Gleason grade, T-stage, iPSA, and margin status predicted cBCR. On MVA, only first post-op uPSA ≥0.03, Gleason grade, and T-stage independently predicted cBCR. First post-op uPSA ≥0.03 conferred the highest risk (HR 8.5, p<0.0001) and discerned cBCR with greater sensitivity than undetectable first conventional PSA (70% vs. 46%). Any post-op PSA ≥0.03 captured all failures missed by first post-op value (100% sensitivity) with accuracy (96% specificity). Defining failure at uPSA ≥0.03 yielded a median lead-time advantage of 18 months (mean 24 months) over the conventional PSA ≥0.2 definition. CONCLUSION uPSA ≥0.03 is an independent factor, identifies BCR more accurately than any traditional risk factors, and confers a significant lead-time advantage. uPSA enables critical decisions regarding timing and indication for post-op RT among high-risk patients following RP. PMID:25463990
Candia, Roberto; Naimark, David; Sander, Beate; Nguyen, Geoffrey C
2017-11-01
Postoperative recurrence of Crohn's disease is common. This study sought to assess whether the postoperative management should be based on biological therapy alone or combined with thiopurines and whether the therapy should be started immediately after surgery or guided by either endoscopic or clinical recurrence. A Markov model was developed to estimate expected health outcomes in quality-adjusted life years (QALYs) and costs in Canadian dollars (CAD$) accrued by hypothetical patients with high recurrence risk after ileocolic resection. Eight strategies of postoperative management were evaluated. A lifetime time horizon, an annual discount rate of 5%, a societal perspective, and a cost-effectiveness threshold of 50,000 CAD$/QALY were assumed. Deterministic and probabilistic sensitivity analyses were conducted. The model was validated against randomized trials and historical cohorts. Three strategies dominated the others: endoscopy-guided full step-up therapy (14.80 QALYs, CAD$ 462,180), thiopurines immediately post-surgery plus endoscopy-guided biological step-up therapy (14.89 QALYs, CAD$ 464,099) and combination therapy immediately post-surgery (14.94 QALYs, CAD$ 483,685). The second strategy was the most cost-effective, assuming a cost-effectiveness threshold of 50,000 CAD$/QALY. Probabilistic sensitivity analysis showed that the second strategy has the highest probability of being the optimal alternative in all comparisons at cost-effectiveness thresholds from 30,000 to 100,000 CAD$/QALY. The strategies guided only by clinical recurrence and those using biologics alone were dominated. According to this decision analysis, thiopurines immediately after surgery and addition of biologics guided by endoscopic recurrence is the optimal strategy of postoperative management in patients with Crohn's disease with high risk of recurrence (see Video Abstract, Supplemental Digital Content 1, http://links.lww.com/IBD/B654).
Lee, Minyoung; Lim, Taehyun; Lee, Jaehyuk; Kim, Kimyeong; Yoon, BumChul
2017-11-01
Little is known about the optimal retraining time for regaining functional fitness through multicomponent training following long-term detraining in older adults. This study first investigated the time course of functional fitness changes during 12-month multicomponent training, 12-month detraining, and 9-month retraining in 18 older adults (68.33±3.46) and then determined the optimal retraining time for regaining the post-training functional fitness level after a 12-month detraining period. Functional fitness, including lower and upper limb strength, lower and upper limb flexibility, aerobic endurance, and dynamic balance, was assessed at baseline, 12 months post-training, 12 months post-detraining, and 3, 6, and 9 months post-retraining. There were significant increases in all of the functional fitness components except upper limb flexibility at post-training and no significant decreases at post-detraining. For lower and upper limb strength and lower limb flexibility, a 3-month period was required to regain the post-training condition. For aerobic endurance and dynamic balance, a retraining period ≥9months was necessary to regain the post-training functional fitness condition. To regain the post-training condition of all functional fitness components, a retraining period ≥9months was required. This information might be useful for health professionals to encourage older adults not to interrupt retraining until they regain their post-training functional fitness condition. Copyright © 2017 Elsevier B.V. All rights reserved.
Optimizing Academic and ESL Acquisition Environments in China's Post-Secondary Education System
ERIC Educational Resources Information Center
Guadagni, Donald
2016-01-01
The purpose of this article is an examination of methods and result used in modifying classroom management and curriculum delivery in the mainland China post-secondary education system to enhance language acquisition skills. Using hybridized methods to optimize these academic and environmental variables requires merging both national and…
Collaborative Platform for DFM
2007-12-20
generation litho hotspot checkers have also been implemented in automated hotspot fixers that can automatically fix designs by making small changes...processing side (ex. new CMP models, etch models, litho models) and on the circuit side (ex. Process aware circuit analysis or yield optimization...Since final gate CD is a function of not only litho , but Post Exposure Bake, ashing, and etch, the processing module can be augmented with more
Cognitive Model Exploration and Optimization: A New Challenge for Computational Science
2010-03-01
the generation and analysis of computational cognitive models to explain various aspects of cognition. Typically the behavior of these models...computational scale of a workstation, so we have turned to high performance computing (HPC) clusters and volunteer computing for large-scale...computational resources. The majority of applications on the Department of Defense HPC clusters focus on solving partial differential equations (Post
Cognitive Model Exploration and Optimization: A New Challenge for Computational Science
2010-01-01
Introduction Research in cognitive science often involves the generation and analysis of computational cognitive models to explain various...HPC) clusters and volunteer computing for large-scale computational resources. The majority of applications on the Department of Defense HPC... clusters focus on solving partial differential equations (Post, 2009). These tend to be lean, fast models with little noise. While we lack specific
2008-01-01
designing cost -effective CIRF networks or readily comparing alterna- tive potential network designs. The RAND Corporation was asked to develop such an...optimization model that allows users to select the best mix of land- and sea-based FSLs for a given set of operational scenarios, thereby reducing costs while...27 Overview of Post-BRAC Bed-Downs and CIRF Assignments . . . . . . . . . . . . . 27 JEIM Cost
Reyes-Guzmán, Edwin Alfredo; Poutou-Piñales, Raúl A.; Reyes-Montaño, Edgar Antonio; Pedroza-Rodríguez, Aura Marina; Rodríguez-Vázquez, Refugio; Cardozo-Bernal, Ángela M.
2015-01-01
Lacasses are multicopper oxidases that can catalyze aromatic and non-aromatic compounds concomitantly with reduction of molecular oxygen to water. Fungal laccases have generated a growing interest due to their biotechnological potential applications, such as lignocellulosic material delignification, biopulping and biobleaching, wastewater treatment, and transformation of toxic organic pollutants. In this work we selected fungal genes encoding for laccase enzymes GlLCC1 in Ganoderma lucidum and POXA 1B in Pleurotus ostreatus. These genes were optimized for codon use, GC content, and regions generating secondary structures. Laccase proposed computational models, and their interaction with ABTS [2, 2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)] substrate was evaluated by molecular docking. Synthetic genes were cloned under the control of Pichia pastoris glyceraldehyde-3-phosphate dehydrogenase (GAP) constitutive promoter. P. pastoris X-33 was transformed with pGAPZαA-LaccGluc-Stop and pGAPZαA-LaccPost-Stop constructs. Optimization reduced GC content by 47 and 49% for LaccGluc-Stop and LaccPost-Stop genes, respectively. A codon adaptation index of 0.84 was obtained for both genes. 3D structure analysis using SuperPose revealed LaccGluc-Stop is similar to the laccase crystallographic structure 1GYC of Trametes versicolor. Interaction analysis of the 3D models validated through ABTS, demonstrated higher substrate affinity for LaccPost-Stop, in agreement with our experimental results with enzymatic activities of 451.08 ± 6.46 UL-1 compared to activities of 0.13 ± 0.028 UL-1 for LaccGluc-Stop. This study demonstrated that G. lucidum GlLCC1 and P. ostreatus POXA 1B gene optimization resulted in constitutive gene expression under GAP promoter and α-factor leader in P. pastoris. These are important findings in light of recombinant enzyme expression system utility for environmentally friendly designed expression systems, because of the wide range of substrates that laccases can transform. This contributes to a great gamut of products in diverse settings: industry, clinical and chemical use, and environmental applications. PMID:25611746
Rivera-Hoyos, Claudia M; Morales-Álvarez, Edwin David; Poveda-Cuevas, Sergio Alejandro; Reyes-Guzmán, Edwin Alfredo; Poutou-Piñales, Raúl A; Reyes-Montaño, Edgar Antonio; Pedroza-Rodríguez, Aura Marina; Rodríguez-Vázquez, Refugio; Cardozo-Bernal, Ángela M
2015-01-01
Lacasses are multicopper oxidases that can catalyze aromatic and non-aromatic compounds concomitantly with reduction of molecular oxygen to water. Fungal laccases have generated a growing interest due to their biotechnological potential applications, such as lignocellulosic material delignification, biopulping and biobleaching, wastewater treatment, and transformation of toxic organic pollutants. In this work we selected fungal genes encoding for laccase enzymes GlLCC1 in Ganoderma lucidum and POXA 1B in Pleurotus ostreatus. These genes were optimized for codon use, GC content, and regions generating secondary structures. Laccase proposed computational models, and their interaction with ABTS [2, 2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)] substrate was evaluated by molecular docking. Synthetic genes were cloned under the control of Pichia pastoris glyceraldehyde-3-phosphate dehydrogenase (GAP) constitutive promoter. P. pastoris X-33 was transformed with pGAPZαA-LaccGluc-Stop and pGAPZαA-LaccPost-Stop constructs. Optimization reduced GC content by 47 and 49% for LaccGluc-Stop and LaccPost-Stop genes, respectively. A codon adaptation index of 0.84 was obtained for both genes. 3D structure analysis using SuperPose revealed LaccGluc-Stop is similar to the laccase crystallographic structure 1GYC of Trametes versicolor. Interaction analysis of the 3D models validated through ABTS, demonstrated higher substrate affinity for LaccPost-Stop, in agreement with our experimental results with enzymatic activities of 451.08 ± 6.46 UL-1 compared to activities of 0.13 ± 0.028 UL-1 for LaccGluc-Stop. This study demonstrated that G. lucidum GlLCC1 and P. ostreatus POXA 1B gene optimization resulted in constitutive gene expression under GAP promoter and α-factor leader in P. pastoris. These are important findings in light of recombinant enzyme expression system utility for environmentally friendly designed expression systems, because of the wide range of substrates that laccases can transform. This contributes to a great gamut of products in diverse settings: industry, clinical and chemical use, and environmental applications.
Discovering Cohorts of Pregnant Women From Social Media for Safety Surveillance and Analysis.
Sarker, Abeed; Chandrashekar, Pramod; Magge, Arjun; Cai, Haitao; Klein, Ari; Gonzalez, Graciela
2017-10-30
Pregnancy exposure registries are the primary sources of information about the safety of maternal usage of medications during pregnancy. Such registries enroll pregnant women in a voluntary fashion early on in pregnancy and follow them until the end of pregnancy or longer to systematically collect information regarding specific pregnancy outcomes. Although the model of pregnancy registries has distinct advantages over other study designs, they are faced with numerous challenges and limitations such as low enrollment rate, high cost, and selection bias. The primary objectives of this study were to systematically assess whether social media (Twitter) can be used to discover cohorts of pregnant women and to develop and deploy a natural language processing and machine learning pipeline for the automatic collection of cohort information. In addition, we also attempted to ascertain, in a preliminary fashion, what types of longitudinal information may potentially be mined from the collected cohort information. Our discovery of pregnant women relies on detecting pregnancy-indicating tweets (PITs), which are statements posted by pregnant women regarding their pregnancies. We used a set of 14 patterns to first detect potential PITs. We manually annotated a sample of 14,156 of the retrieved user posts to distinguish real PITs from false positives and trained a supervised classification system to detect real PITs. We optimized the classification system via cross validation, with features and settings targeted toward optimizing precision for the positive class. For users identified to be posting real PITs via automatic classification, our pipeline collected all their available past and future posts from which other information (eg, medication usage and fetal outcomes) may be mined. Our rule-based PIT detection approach retrieved over 200,000 posts over a period of 18 months. Manual annotation agreement for three annotators was very high at kappa (κ)=.79. On a blind test set, the implemented classifier obtained an overall F 1 score of 0.84 (0.88 for the pregnancy class and 0.68 for the nonpregnancy class). Precision for the pregnancy class was 0.93, and recall was 0.84. Feature analysis showed that the combination of dense and sparse vectors for classification achieved optimal performance. Employing the trained classifier resulted in the identification of 71,954 users from the collected posts. Over 250 million posts were retrieved for these users, which provided a multitude of longitudinal information about them. Social media sources such as Twitter can be used to identify large cohorts of pregnant women and to gather longitudinal information via automated processing of their postings. Considering the many drawbacks and limitations of pregnancy registries, social media mining may provide beneficial complementary information. Although the cohort sizes identified over social media are large, future research will have to assess the completeness of the information available through them. ©Abeed Sarker, Pramod Chandrashekar, Arjun Magge, Haitao Cai, Ari Klein, Graciela Gonzalez. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 30.10.2017.
Post optimization paradigm in maximum 3-satisfiability logic programming
NASA Astrophysics Data System (ADS)
Mansor, Mohd. Asyraf; Sathasivam, Saratha; Kasihmuddin, Mohd Shareduwan Mohd
2017-08-01
Maximum 3-Satisfiability (MAX-3SAT) is a counterpart of the Boolean satisfiability problem that can be treated as a constraint optimization problem. It deals with a conundrum of searching the maximum number of satisfied clauses in a particular 3-SAT formula. This paper presents the implementation of enhanced Hopfield network in hastening the Maximum 3-Satisfiability (MAX-3SAT) logic programming. Four post optimization techniques are investigated, including the Elliot symmetric activation function, Gaussian activation function, Wavelet activation function and Hyperbolic tangent activation function. The performances of these post optimization techniques in accelerating MAX-3SAT logic programming will be discussed in terms of the ratio of maximum satisfied clauses, Hamming distance and the computation time. Dev-C++ was used as the platform for training, testing and validating our proposed techniques. The results depict the Hyperbolic tangent activation function and Elliot symmetric activation function can be used in doing MAX-3SAT logic programming.
Mechanical properties and superficial characterization of a milled CAD-CAM glass fiber post.
Ruschel, George Hebert; Gomes, Érica Alves; Silva-Sousa, Yara Terezinha; Pinelli, Rafaela Giedra Pirondi; Sousa-Neto, Manoel Damião; Pereira, Gabriel Kalil Rocha; Spazzin, Aloísio Oro
2018-06-01
Computer-aided design and computer-aided manufacturing (CAD-CAM) technology may be used to produce custom intraradicular posts, but studies are lacking. The purpose of this in vitro study was to evaluate the flexural properties (strength and modulus), failure mode, superficial morphology, and roughness of two CAD-CAM glass fiber posts (milled at different angulations) compared with a commercially available prefabricated glass fiber post. Three groups were tested (n = 10): PF (control group)- prefabricated glass fiber post; C-Cd-diagonally milled post; and C-Cv-vertically milled post. A 3-dimensional virtual image was obtained from a prefabricated post, which guided the posterior milling of posts from a glass fiber disk (Trilor Blanks; Bioloren). Surface roughness and morphology were evaluated using confocal laser microscopy. Flexural strength and modulus were evaluated with the 3-point bend test. Data were submitted to one-way analysis of variance followed by the Student-Newman-Keuls post hoc test (α = 0.05). The fractured surfaces were evaluated with scanning electron microscopy. The superficial roughness was highest for PF and similar for the experimental groups. Morphological analysis shows different sizes and directions of the glass fibers along the post. The flexural strength was highest for PF (900.1 ± 30.4 > C-Cd - 357.2 ± 30.7 > C-Cv 101.8 ± 4.3 MPa) as was the flexural modulus (PF 19.3 ± 2.0 GPa > C-Cv 10.1 ± 1.9 GPa > C-Cd 7.8 ± 1.3 GPa). A CAD-CAM milled post seems a promising development, but processing requires optimizing, as the prefabricated post still shows better mechanical properties and superficial characteristics. Copyright © 2018 Elsevier Ltd. All rights reserved.
Card, Kiffer George; Lachowsky, Nathan; Hawkins, Blake W; Jollimore, Jody; Baharuddin, Fahmy; Hogg, Robert S
2018-04-06
Social media is used by community-based organizations (CBOs) to promote the well-being of gay and bisexual men (GBM). However, few studies have quantified which factors facilitate the diffusion of health content tailored for sexual minorities. The aim of this study was to identify post characteristics that can be leveraged to optimize the health promotion efforts of CBOs on Facebook. The Facebook application programming interface was used to collect 5 years' of posts shared across 10 Facebook pages administered by Vancouver-based CBOs promoting GBM health. Network analysis assessed basic indicators of network structure. Content analyses were conducted using informatics-based approaches. Hierarchical negative binomial regression of post engagement data was used to identify meaningful covariates of engagement. In total, 14,071 posts were shared and 21,537 users engaged with these posts. Most users (n=13,315) engaged only once. There was moderate correlation between the number of posts and the number of CBOs users engaged with (r=.53, P<.001). Higher user engagement was positively associated with positive sentiment, sharing multimedia, and posting about pre-exposure prophylaxis, stigma, and mental health. Engagement was negatively associated with asking questions, posting about dating, and sharing posts during or after work (versus before). Results highlight the existence of a core group of Facebook users who facilitate diffusion. Factors associated with greater user engagement present CBOs with a number of strategies for improving the diffusion of health content. ©Kiffer George Card, Nathan Lachowsky, Blake W Hawkins, Jody Jollimore, Fahmy Baharuddin, Robert S Hogg. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 06.04.2018.
Detecting glaucomatous change in visual fields: Analysis with an optimization framework.
Yousefi, Siamak; Goldbaum, Michael H; Varnousfaderani, Ehsan S; Belghith, Akram; Jung, Tzyy-Ping; Medeiros, Felipe A; Zangwill, Linda M; Weinreb, Robert N; Liebmann, Jeffrey M; Girkin, Christopher A; Bowd, Christopher
2015-12-01
Detecting glaucomatous progression is an important aspect of glaucoma management. The assessment of longitudinal series of visual fields, measured using Standard Automated Perimetry (SAP), is considered the reference standard for this effort. We seek efficient techniques for determining progression from longitudinal visual fields by formulating the problem as an optimization framework, learned from a population of glaucoma data. The longitudinal data from each patient's eye were used in a convex optimization framework to find a vector that is representative of the progression direction of the sample population, as a whole. Post-hoc analysis of longitudinal visual fields across the derived vector led to optimal progression (change) detection. The proposed method was compared to recently described progression detection methods and to linear regression of instrument-defined global indices, and showed slightly higher sensitivities at the highest specificities than other methods (a clinically desirable result). The proposed approach is simpler, faster, and more efficient for detecting glaucomatous changes, compared to our previously proposed machine learning-based methods, although it provides somewhat less information. This approach has potential application in glaucoma clinics for patient monitoring and in research centers for classification of study participants. Copyright © 2015 Elsevier Inc. All rights reserved.
Prediction of muscle performance during dynamic repetitive movement
NASA Technical Reports Server (NTRS)
Byerly, D. L.; Byerly, K. A.; Sognier, M. A.; Squires, W. G.
2003-01-01
BACKGROUND: During long-duration spaceflight, astronauts experience progressive muscle atrophy and often perform strenuous extravehicular activities. Post-flight, there is a lengthy recovery period with an increased risk for injury. Currently, there is a critical need for an enabling tool to optimize muscle performance and to minimize the risk of injury to astronauts while on-orbit and during post-flight recovery. Consequently, these studies were performed to develop a method to address this need. METHODS: Eight test subjects performed a repetitive dynamic exercise to failure at 65% of their upper torso weight using a Lordex spinal machine. Surface electromyography (SEMG) data was collected from the erector spinae back muscle. The SEMG data was evaluated using a 5th order autoregressive (AR) model and linear regression analysis. RESULTS: The best predictor found was an AR parameter, the mean average magnitude of AR poles, with r = 0.75 and p = 0.03. This parameter can predict performance to failure as early as the second repetition of the exercise. CONCLUSION: A method for predicting human muscle performance early during dynamic repetitive exercise was developed. The capability to predict performance to failure has many potential applications to the space program including evaluating countermeasure effectiveness on-orbit, optimizing post-flight recovery, and potential future real-time monitoring capability during extravehicular activity.
Response to hepatitis A and B vaccination after pediatric heart transplant.
Martin, Kathy; Drabble, Alison; Manlhiot, Cedric; Dipchand, Anne I
2012-11-01
The determination of optimal immunization protocols for immunocompromised patients is important given limited data, the potential for decreased vaccine response, and the increased threat of infection. This retrospective study assessed the response to HA and/or HB vaccination in a cohort of 13 PHTx recipients. Descriptive statistics were applied to the data, and univariate analysis was utilized to identify possible factors associated with vaccine response. HA vaccination occurred in 12 (92%) patients of whom three (25%) became HA IgG positive post-vaccination. Eight (62%) patients had previously received HB vaccination. HB vaccination occurred in 10 (77%) patients of whom five (50%) were anti-HBS IgG positive post-vaccination. Median age at HA and HB vaccination was 10.0 yr, and median time post-PHTx was 8.2 yr. Looking at the entire patient cohort, a previous history of HB vaccination was associated with increased probability of HB vaccine success (7/8 [88%] vs. 1/5 [20%], p = 0.03). Vaccine response in this cohort of PHTx recipients was well below the rates of healthy children. Only a previous history of HB vaccination was significant for increased likelihood of vaccine response. Further study is needed to identify the optimal approach to vaccination for PHTx recipients. © 2012 John Wiley & Sons A/S.
Optimizing inhaler use by pharmacist-provided education to community-dwelling elderly.
Bouwmeester, Carla; Kraft, Jacqueline; Bungay, Kathleen M
2015-10-01
To assess, using a standard observational tool, the ability of patients to demonstrate and maintain proper inhaled medication administration techniques following pharmacist education. Six-month observational study. Patients' homes or adult day health center. Patients in a Program for All-inclusive Care for the Elderly (PACE) prescribed one or more inhaled medications used at least once daily. Instruction by on-site clinical pharmacist. Hickey's Pharmacies Inhaler Technique assessment (score range: 0-20, higher better). Forty-two patients were evaluated at baseline, taught proper techniques for using inhaled medications, assessed immediately following the education, and re-assessed 4-6 weeks later. The mean pre-assessment score was 14 (SD 4.5, range 0-20), the initial post-assessment score increased to 18 (SD 3, range 10-20). The second post-assessment (4-6 weeks later) score mean was 17.7 (SD 3, range 10-20). Both follow-up scores were significantly improved from baseline (p < 0.05). Multivariable analysis indicated the strongest predictors of second post-training score were: score after initial pharmacist training and being subscribed to auto-refill. These characteristics predicted ∼70% of the variance in the second score (p < 0.001). These results indicate that education by a pharmacist combined with an auto-refill program can improve and sustain appropriate inhaler use by community-dwelling elders in a PACE program. The improved score was maintained 4-6 weeks later indicating a sustained benefit of medication administration education. Optimal inhaler use ensures optimal dosing and supports appropriate inhaler treatment in lieu of oral agents. Copyright © 2015 Elsevier Ltd. All rights reserved.
The scope and value of an anticoagulation stewardship program at a community teaching hospital.
Wychowski, Maura K; Ruscio, Christina I; Kouides, Peter A; Sham, Ronald L
2017-04-01
To report the impact of an inpatient anticoagulation stewardship program at a community hospital to promote optimal anticoagulant use. The anticoagulation team (ACT) stewardship program consists of two clinical pharmacists and hematologists to provide oversight of anticoagulants, high cost reversal agents including prothrombin complex concentrate (PCC, Kcentra™), and heparin-induced thrombocytopenia (HIT) management. Intervention data and number of charts reviewed were collected. Average cost avoidance data was applied to ACT interventions to estimate cost savings. The PCC analysis was conducted via retrospective chart review during the pre-intervention period. Prospective monitoring continued in the post-intervention period to determine the percentage of PCC use within the institution's guidelines or approved by ACT or hematology. A total of 19,445 patient charts were reviewed, and 1930 (10%) contained stewardship opportunity. Of the interventions, 71% were provided to the medical service and 22% to surgical services with acceptance rates of 91 and 83%, respectively. Intervention cost-avoidance calculated to be $694,217. Regarding HIT interventions, 52% of interventions involved pharmacokinetic/pharmacodynamics optimization in 18 patients with suspected or confirmed HIT. Regarding PCC use, 55.8% of PCC orders were considered inappropriate in the pre-invention period versus 2.6% post-intervention. Appropriate PCC doses per month post-intervention were consistent with pre-intervention doses (7.67 vs. 6.73, respectively). The projected annual PCC cost savings is $385,473. The overall estimated financial impact of ACT is $799,690 saved. Implementation of an anticoagulation stewardship program reduced costs and improved clinical outcomes. It is also expected that anticoagulant optimization and provider education improved overall safety.
Performance Analysis and Optimization of the Winnow Secret Key Reconciliation Protocol
2011-06-01
use in a quantum key system can be defined in two ways : The number of messages passed between Alice and Bob The...classical and quantum environment. Post- quantum cryptography , which is generally used to describe classical quantum -resilient protocols, includes...composed of a one- way quantum channel and a two - way classical channel. Owing to the physics of the channel, the quantum channel is subject to
Improvement of Storm Forecasts Using Gridded Bayesian Linear Regression for Northeast United States
NASA Astrophysics Data System (ADS)
Yang, J.; Astitha, M.; Schwartz, C. S.
2017-12-01
Bayesian linear regression (BLR) is a post-processing technique in which regression coefficients are derived and used to correct raw forecasts based on pairs of observation-model values. This study presents the development and application of a gridded Bayesian linear regression (GBLR) as a new post-processing technique to improve numerical weather prediction (NWP) of rain and wind storm forecasts over northeast United States. Ten controlled variables produced from ten ensemble members of the National Center for Atmospheric Research (NCAR) real-time prediction system are used for a GBLR model. In the GBLR framework, leave-one-storm-out cross-validation is utilized to study the performances of the post-processing technique in a database composed of 92 storms. To estimate the regression coefficients of the GBLR, optimization procedures that minimize the systematic and random error of predicted atmospheric variables (wind speed, precipitation, etc.) are implemented for the modeled-observed pairs of training storms. The regression coefficients calculated for meteorological stations of the National Weather Service are interpolated back to the model domain. An analysis of forecast improvements based on error reductions during the storms will demonstrate the value of GBLR approach. This presentation will also illustrate how the variances are optimized for the training partition in GBLR and discuss the verification strategy for grid points where no observations are available. The new post-processing technique is successful in improving wind speed and precipitation storm forecasts using past event-based data and has the potential to be implemented in real-time.
Farina-Henry, Eva; Waterston, Leo B; Blaisdell, Laura L
2015-07-22
This paper presents the first formal evaluation of social media (SM) use in the National Children's Study (NCS). The NCS is a prospective, longitudinal study of the effects of environment and genetics on children's health, growth and development. The Study employed a multifaceted community outreach campaign in combination with a SM campaign to educate participants and their communities about the Study. SM essentially erases geographic differences between people due to its omnipresence, which was an important consideration in this multi-site national study. Using SM in the research setting requires an understanding of potential threats to confidentiality and privacy and the role that posted content plays as an extension of the informed consent process. This pilot demonstrates the feasibility of creating linkages and databases to measure and compare SM with new content and engagement metrics. Metrics presented include basic use metrics for Facebook as well as newly created metrics to assist with Facebook content and engagement analyses. Increasing Likes per month demonstrates that online communities can be quickly generated. Content and Engagement analyses describe what content of posts NCS Study Centers were using, what content they were posting about, and what the online NCS communities found most engaging. These metrics highlight opportunities to optimize time and effort while determining the content of future posts. Further research about content analysis, optimal metrics to describe engagement in research, the role of localized content and stakeholders, and social media use in participant recruitment is warranted.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gesta, E.; Intelligent Insect Control, 118 Chemin des Alouettes, Castelnau-le-Lez, 34170; Skovmand, O., E-mail: osk@insectcontrol.net
The purpose of this study is to understand the influence of the yarn processing on the migration of additives molecules, especially insecticide, within polyethylene (PE) yarns. Yarns were manufactured in the laboratory focusing on three key-steps (spinning, post-stretching and heat-setting). Influence of each step on yarn properties was investigated using tensile tests, differential scanning calorimetry and wide-angle X-ray diffraction. The post-stretching step was proved to be critical in defining yarn mechanical and structural properties. Although a first orientation of polyethylene crystals was induced during spinning, the optimal orientation was only reached by post-stretching. The results also showed that the heat-settingmore » did not significantly change these properties. The presence of additives crystals at the yarn surface was evidenced by scanning-electron microscopy. These studies performed at each yarn production step allowed a detailed analysis of the additives’ ability to migrate. It is concluded that while post-stretching decreased the migration rate, heat-setting seems to boost this migration.« less
NASA Astrophysics Data System (ADS)
Trudel, Mélanie; Leconte, Robert; Paniconi, Claudio
2014-06-01
Data assimilation techniques not only enhance model simulations and forecast, they also provide the opportunity to obtain a diagnostic of both the model and observations used in the assimilation process. In this research, an ensemble Kalman filter was used to assimilate streamflow observations at a basin outlet and at interior locations, as well as soil moisture at two different depths (15 and 45 cm). The simulation model is the distributed physically-based hydrological model CATHY (CATchment HYdrology) and the study site is the Des Anglais watershed, a 690 km2 river basin located in southern Quebec, Canada. Use of Latin hypercube sampling instead of a conventional Monte Carlo method to generate the ensemble reduced the size of the ensemble, and therefore the calculation time. Different post-assimilation diagnostics, based on innovations (observation minus background), analysis residuals (observation minus analysis), and analysis increments (analysis minus background), were used to evaluate assimilation optimality. An important issue in data assimilation is the estimation of error covariance matrices. These diagnostics were also used in a calibration exercise to determine the standard deviation of model parameters, forcing data, and observations that led to optimal assimilations. The analysis of innovations showed a lag between the model forecast and the observation during rainfall events. Assimilation of streamflow observations corrected this discrepancy. Assimilation of outlet streamflow observations improved the Nash-Sutcliffe efficiencies (NSE) between the model forecast (one day) and the observation at both outlet and interior point locations, owing to the structure of the state vector used. However, assimilation of streamflow observations systematically increased the simulated soil moisture values.
Eskinazi, Ilan; Fregly, Benjamin J
2018-04-01
Concurrent estimation of muscle activations, joint contact forces, and joint kinematics by means of gradient-based optimization of musculoskeletal models is hindered by computationally expensive and non-smooth joint contact and muscle wrapping algorithms. We present a framework that simultaneously speeds up computation and removes sources of non-smoothness from muscle force optimizations using a combination of parallelization and surrogate modeling, with special emphasis on a novel method for modeling joint contact as a surrogate model of a static analysis. The approach allows one to efficiently introduce elastic joint contact models within static and dynamic optimizations of human motion. We demonstrate the approach by performing two optimizations, one static and one dynamic, using a pelvis-leg musculoskeletal model undergoing a gait cycle. We observed convergence on the order of seconds for a static optimization time frame and on the order of minutes for an entire dynamic optimization. The presented framework may facilitate model-based efforts to predict how planned surgical or rehabilitation interventions will affect post-treatment joint and muscle function. Copyright © 2018 IPEM. Published by Elsevier Ltd. All rights reserved.
COMMUNITY COLLEGE RE-ENROLLMENT AFTER HURRICANE KATRINA
LOWE, SARAH R.; RHODES, JEAN E.
2013-01-01
In this study, we explored predictors of community college re-enrollment after Hurricane Katrina among a sample of low-income women (N = 221). It was predicted that participants’ pre-hurricane educational optimism would predict community college re-enrollment a year after the hurricane. The influence of various demographic and additional resources (e.g., social support, childcare, hours of employment, psychological well-being) was also explored. High levels of pre- and post-hurricane educational optimism were significant predictors of re-enrollment, as were lower post-hurricane psychological distress and fewer post-hurricane hours employed. In addition, experiencing a greater number of moves since the hurricane was a marginally significant predictor of post-hurricane re-enrollment. PMID:23457425
van Vliet, Stephan; Beals, Joseph W.; Martinez, Isabel G.; Skinner, Sarah K.; Burd, Nicholas A.
2018-01-01
Dietary protein ingestion is critical to maintaining the quality and quantity of skeletal muscle mass throughout adult life. The performance of acute exercise enhances muscle protein remodeling by stimulating protein synthesis rates for several hours after each bout, which can be optimized by consuming protein during the post-exercise recovery period. To date, the majority of the evidence regarding protein intake to optimize post-exercise muscle protein synthesis rates is limited to isolated protein sources. However, it is more common to ingest whole food sources of protein within a normal eating pattern. Emerging evidence demonstrates a promising role for the ingestion of whole foods as an effective nutritional strategy to support muscle protein remodeling and recovery after exercise. This review aims to evaluate the efficacy of the ingestion of nutrient-rich and protein-dense whole foods to support post-exercise muscle protein remodeling and recovery with pertinence towards physically active people. PMID:29462924
Jenderek, Maria M; Tanner, Justin D; Ambruzs, Barbara D; West, Mark; Postman, Joseph D; Hummer, Kim E
2017-02-01
Cryopreservation of temperate woody-plant material by dormant buds is less expensive than using shoot tips isolated from tissue cultured plants; however currently, dormant buds are used only for preservation of selected temperate tree and shrub species. Using dormant buds could be an efficient strategy for long-term preservation of blueberry (Vaccinium L.) genetic resources. In this study, viability of V. hybrid 'Northsky' (PI 554943) dormant buds was evaluated at 30 harvest dates over three consecutive fall/winter seasons to determine the optimal harvest time that promotes high post cryopreservation viability. Twigs with dormant buds were cut into 70 mm segments containing at least two nodes, desiccated, slowly cooled, stored in liquid nitrogen vapor and tested for post-cryopreservation regrowth. The highest regrowth of cryopreserved dormant buds was observed for buds harvested in mid-December and during the first half of January. Pearson's correlation coefficients were computed to evaluate the association between bud characteristics and viability at harvest date and logistic regression models were fit to test the ability of twig characteristics and temperatures to predict post cryopreservation bud viability. Post-cryopreservation viability was negatively correlated (p < 0.05) with average minimum, maximum and daily mean temperature preceding the bud harvest but was not correlated with the dormant bud initial and end moisture content, twig diameter, the number of dormant buds/cm of twig length and the number of days in desiccation. Regression tree analysis suggested post-cryopreservation viability to be between 52 and 80% for dormant buds harvested after a 10 day average maximum air temperature of <11.2 °C. Pre-harvest air temperature was a significant indicator of optimal dormant bud harvest time to produce adequate viability for long term preservation of blueberry genetic resources. Published by Elsevier Inc.
Application of Post Modern Portfolio Theory to Mitigate Risk in International Shipping
2011-03-24
The concept of portfolio optimization pioneered by Dr. Harry Markowitz and still used today for investment diversification is applied to the ...is currently referred to as “Post-Modern Portfolio Theory .” It begins with the foundations of portfolio optimization as created by Harry 14... Portfolio Theory ,” and is still considered to be one of the foundations of economic theory , garnering
TMS combined with EEG in genetic generalized epilepsy: A phase II diagnostic accuracy study.
Kimiskidis, Vasilios K; Tsimpiris, Alkiviadis; Ryvlin, Philippe; Kalviainen, Reetta; Koutroumanidis, Michalis; Valentin, Antonio; Laskaris, Nikolaos; Kugiumtzis, Dimitris
2017-02-01
(A) To develop a TMS-EEG stimulation and data analysis protocol in genetic generalized epilepsy (GGE). (B) To investigate the diagnostic accuracy of TMS-EEG in GGE. Pilot experiments resulted in the development and optimization of a paired-pulse TMS-EEG protocol at rest, during hyperventilation (HV), and post-HV combined with multi-level data analysis. This protocol was applied in 11 controls (C) and 25 GGE patients (P), further dichotomized into responders to antiepileptic drugs (R, n=13) and non-responders (n-R, n=12).Features (n=57) extracted from TMS-EEG responses after multi-level analysis were given to a feature selection scheme and a Bayesian classifier, and the accuracy of assigning participants into the classes P-C and R-nR was computed. On the basis of the optimal feature subset, the cross-validated accuracy of TMS-EEG for the classification P-C was 0.86 at rest, 0.81 during HV and 0.92 at post-HV, whereas for R-nR the corresponding figures are 0.80, 0.78 and 0.65, respectively. Applying a fusion approach on all conditions resulted in an accuracy of 0.84 for the classification P-C and 0.76 for the classification R-nR. TMS-EEG can be used for diagnostic purposes and for assessing the response to antiepileptic drugs. TMS-EEG holds significant diagnostic potential in GGE. Copyright © 2016 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.
The optimal outcomes of post-hospital care under medicare.
Kane, R L; Chen, Q; Finch, M; Blewett, L; Burns, R; Moskowitz, M
2000-01-01
OBJECTIVE: To estimate the differences in functional outcomes attributable to discharge to one of four different venues for post-hospital care for each of five different types of illness associated with post-hospital care: stroke, chronic obstructive pulmonary disease (COPD), congestive heart failure (CHF), hip procedures, and hip fracture, and to estimate the costs and benefits associated with discharge to the type of care that was estimated to produce the greatest improvement. STUDY SETTING/DATA SOURCES: Consecutive patients with any of the target diagnoses were enrolled from 52 hospitals in three cities. Data sources included interviews with patients or their proxies, medical record reviews, and the Medicare Automated Data Retrieval System. ANALYSIS: A two-stage regression model looked first at the factors associated with discharge to each type of post-hospital care and then at the outcomes associated with each location. An instrumental variables technique was used to adjust for selection bias. A predictive model was created for each patient to estimate how that person would have fared had she or he been discharged to each type of care. The optimal discharge location was determined as that which produced the greatest improvement in function after adjusting for patients' baseline characteristics. The costs of discharge to the optimal type of care was based on the differences in mean costs for each location. DATA COLLECTION/EXTRACTION METHODS: Data were collected from patients or their proxies at discharge from hospital and at three post-discharge follow-up times: six weeks, six months, and one year. In addition, the medical records for each participant were abstracted by trained abstractors, using a modification of the Medisgroups method, and Medicare data were summarized for the years before and after the hospitalization. PRINCIPAL FINDINGS: In general, patients discharged to nursing homes fared worst and those sent home with home health care or to rehabilitation did best. Because the cost of rehabilitation is high, greater use of home care could result in improved outcomes at modest or no additional cost. CONCLUSIONS: Better decisions about where to discharge patients could improve the course of many patients. It is possible to save money by making wiser discharge planning decisions. Nursing homes are generally associated with poorer outcomes and higher costs than the other post-hospital care modalities. PMID:10966088
NASA Astrophysics Data System (ADS)
Ghosh, K.; Naresh, Y.; Srichakradhar Reddy, N.
2012-07-01
In this paper, we present theoretical analysis and computation for tuning the ground state (GS) photoluminescence (PL) emission of InAs/GaAs quantum dots (QDs) at telecommunication window of 1.3-1.55 μm by optimizing its height and base dimensions through quantum mechanical concepts. For this purpose, numerical modelling is carried out to calculate the quantized energy states of finite dimensional QDs so as to obtain the GS PL emission at or beyond 1.3 μm. Here, we also explored strain field altering the QD size distribution in multilayer heterostructure along with the changes in the PL spectra, simulation on post growth thermal annealing process which blueshifts the operating wavelength away from the vicinity of 1.3 μm and improvement of optical properties by varying the thickness of GaAs spacing. The results are discussed in detail which will serve as an important information tool for device scientist fabricating high quality semiconductor quantum structures with reduced defects at telecommunication wavelengths.
Post-processing interstitialcy diffusion from molecular dynamics simulations
NASA Astrophysics Data System (ADS)
Bhardwaj, U.; Bukkuru, S.; Warrier, M.
2016-01-01
An algorithm to rigorously trace the interstitialcy diffusion trajectory in crystals is developed. The algorithm incorporates unsupervised learning and graph optimization which obviate the need to input extra domain specific information depending on crystal or temperature of the simulation. The algorithm is implemented in a flexible framework as a post-processor to molecular dynamics (MD) simulations. We describe in detail the reduction of interstitialcy diffusion into known computational problems of unsupervised clustering and graph optimization. We also discuss the steps, computational efficiency and key components of the algorithm. Using the algorithm, thermal interstitialcy diffusion from low to near-melting point temperatures is studied. We encapsulate the algorithms in a modular framework with functionality to calculate diffusion coefficients, migration energies and other trajectory properties. The study validates the algorithm by establishing the conformity of output parameters with experimental values and provides detailed insights for the interstitialcy diffusion mechanism. The algorithm along with the help of supporting visualizations and analysis gives convincing details and a new approach to quantifying diffusion jumps, jump-lengths, time between jumps and to identify interstitials from lattice atoms.
Post-processing interstitialcy diffusion from molecular dynamics simulations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bhardwaj, U., E-mail: haptork@gmail.com; Bukkuru, S.; Warrier, M.
2016-01-15
An algorithm to rigorously trace the interstitialcy diffusion trajectory in crystals is developed. The algorithm incorporates unsupervised learning and graph optimization which obviate the need to input extra domain specific information depending on crystal or temperature of the simulation. The algorithm is implemented in a flexible framework as a post-processor to molecular dynamics (MD) simulations. We describe in detail the reduction of interstitialcy diffusion into known computational problems of unsupervised clustering and graph optimization. We also discuss the steps, computational efficiency and key components of the algorithm. Using the algorithm, thermal interstitialcy diffusion from low to near-melting point temperatures ismore » studied. We encapsulate the algorithms in a modular framework with functionality to calculate diffusion coefficients, migration energies and other trajectory properties. The study validates the algorithm by establishing the conformity of output parameters with experimental values and provides detailed insights for the interstitialcy diffusion mechanism. The algorithm along with the help of supporting visualizations and analysis gives convincing details and a new approach to quantifying diffusion jumps, jump-lengths, time between jumps and to identify interstitials from lattice atoms. -- Graphical abstract:.« less
Bai, Mingsian R; Hsieh, Ping-Ju; Hur, Kur-Nan
2009-02-01
The performance of the minimum mean-square error noise reduction (MMSE-NR) algorithm in conjunction with time-recursive averaging (TRA) for noise estimation is found to be very sensitive to the choice of two recursion parameters. To address this problem in a more systematic manner, this paper proposes an optimization method to efficiently search the optimal parameters of the MMSE-TRA-NR algorithms. The objective function is based on a regression model, whereas the optimization process is carried out with the simulated annealing algorithm that is well suited for problems with many local optima. Another NR algorithm proposed in the paper employs linear prediction coding as a preprocessor for extracting the correlated portion of human speech. Objective and subjective tests were undertaken to compare the optimized MMSE-TRA-NR algorithm with several conventional NR algorithms. The results of subjective tests were processed by using analysis of variance to justify the statistic significance. A post hoc test, Tukey's Honestly Significant Difference, was conducted to further assess the pairwise difference between the NR algorithms.
Frequency Tuning of Vibration Absorber Using Topology Optimization
NASA Astrophysics Data System (ADS)
Harel, Swapnil Subhash
A tuned mass absorber is a system for reducing the amplitude in one oscillator by coupling it to a second oscillator. If tuned correctly, the maximum amplitude of the first oscillator in response to a periodic driver will be lowered, and much of the vibration will be 'transferred' to the second oscillator. The tuned vibration absorber (TVA) has been utilized for vibration control purposes in many sectors of Civil/Automotive/Aerospace Engineering for many decades since its inception. Time and again we come across a situation in which a vibratory system is required to run near resonance. In the past, approaches have been made to design such auxiliary spring mass tuned absorbers for the safety of the structures. This research focuses on the development and optimization of continuously tuned mass absorbers as a substitute to the discretely tuned mass absorbers (spring- mass system). After conducting the study of structural behavior, the boundary condition and frequency to which the absorber is to be tuned are determined. The Modal analysis approach is used to determine mode shapes and frequencies. The absorber is designed and optimized using the topology optimization tool, which simultaneously designs, optimizes and tunes the absorber to the desired frequency. The tuned, optimized absorber, after post processing, is attached to the target structure. The number of the absorbers are increased to amplify bandwidth and thereby upgrade the safety of structure for a wide range of frequency. The frequency response analysis is carried out using various combinations of structure and number of absorber cell.
NASA Technical Reports Server (NTRS)
Brauer, G. L.; Cornick, D. E.; Stevenson, R.
1977-01-01
The capabilities and applications of the three-degree-of-freedom (3DOF) version and the six-degree-of-freedom (6DOF) version of the Program to Optimize Simulated Trajectories (POST) are summarized. The document supplements the detailed program manuals by providing additional information that motivates and clarifies basic capabilities, input procedures, applications and computer requirements of these programs. The information will enable prospective users to evaluate the programs, and to determine if they are applicable to their problems. Enough information is given to enable managerial personnel to evaluate the capabilities of the programs and describes the POST structure, formulation, input and output procedures, sample cases, and computer requirements. The report also provides answers to basic questions concerning planet and vehicle modeling, simulation accuracy, optimization capabilities, and general input rules. Several sample cases are presented.
Straub, B; Schollenberger, M; Kicherer, M; Luckas, B; Hammes, W P
1993-09-01
A convenient method is described for the analysis of biogenic amines (BA) by means of reversed-phase-HPLC. The method is characterized by multi-channel UV detection (diodearray), subsequent post-column derivatization with o-phthaldialdehyde and 3-mercaptopropionic acid, and fluorescence detection. For the analysis of meat products and especially fermented sausages an optimized perchloric acid extraction process was introduced to determine putrescine, cadaverine, histamine, tyramine and 2-phenylethylamine. BA recoveries from meat ranged between 96 and 113% with a detection limit for amines of 0.5 mg/kg.
Nimmaanrat, Sasikaan; Oofuvong, Maliwan
2015-01-01
Medical practitioners' attitudes have a significant impact on quality of care for cancer pain patients. This study was conducted to determine if being given a lecture concerning cancer pain and its management could improve the attitudes of medical students. A comparative study was conducted in 126 fifth-year medical students. Each student completed a pretest consisting of 3 questions about attitudes toward the optimal use of analgesics and 5 questions about attitudes toward prescribing opioids. Then they were given a 1.5-hour lecture, immediately following which they completed a post-test with the same questions. Analysis with either comparison between groups or by matching, the post-test showed significantly more positive attitudes (p<0.05) of the medical students in all 3 questions about optimal use of analgesics and 4 out of 5 questions about prescription of opioids. The post-test results showed significantly more negative attitudes concerning the most appropriate stage for patients with severe pain to receive maximal doses of analgesics. Conservative attitudes, especially concerns about addiction, have been associated with a reluctance in many physicians to prescribe opioids. This study found that cancer pain education can help to improve medical student attitudes. However, fear of addiction and tolerance was still evident so emphasis of this particular issue during a lecture is essential. Providing appropriate information by means of a lecture can improve the attitudes of medical students regarding cancer pain management. However, more information should be given to lessen fear of addiction and tolerance.
Farina-Henry, Eva; Blaisdell, Laura L
2015-01-01
Background This paper presents the first formal evaluation of social media (SM) use in the National Children’s Study (NCS). The NCS is a prospective, longitudinal study of the effects of environment and genetics on children’s health, growth and development. The Study employed a multifaceted community outreach campaign in combination with a SM campaign to educate participants and their communities about the Study. SM essentially erases geographic differences between people due to its omnipresence, which was an important consideration in this multi-site national study. Using SM in the research setting requires an understanding of potential threats to confidentiality and privacy and the role that posted content plays as an extension of the informed consent process. Objective This pilot demonstrates the feasibility of creating linkages and databases to measure and compare SM with new content and engagement metrics. Methods Metrics presented include basic use metrics for Facebook as well as newly created metrics to assist with Facebook content and engagement analyses. Results Increasing Likes per month demonstrates that online communities can be quickly generated. Content and Engagement analyses describe what content of posts NCS Study Centers were using, what content they were posting about, and what the online NCS communities found most engaging. Conclusions These metrics highlight opportunities to optimize time and effort while determining the content of future posts. Further research about content analysis, optimal metrics to describe engagement in research, the role of localized content and stakeholders, and social media use in participant recruitment is warranted. PMID:26201259
Post-assembly magnetization of a 100 kW high speed permanent magnet rotor.
Lv, Yiliang; Wang, Guobin; Li, Liang
2015-03-01
A post-assembly magnetizing fixture has been designed and successfully used to magnetize the rotor of a 100 kW high speed permanent magnet synchronous motor. The rotor is a solid cylinder with outer diameter of 80 mm and total length of 515 mm. The permanent magnet material is samarium-cobalt (Sm2Co17) with saturation magnetizing field of 6 T. The mechanical stability of the magnetizing fixture has been studied as well as the general design methodology. The magnetizing coil is subdivided in order to reduce the electromagnetic force, and the coils are separately reinforced in different ways. The electromagnetic and structural optimization is performed by finite element analysis and verified by experiments.
Lee, Seung Hyun; Lee, Young Han; Hahn, Seok; Yang, Jaemoon; Song, Ho-Taek; Suh, Jin-Suck
2017-01-01
Background Synthetic magnetic resonance imaging (MRI) allows reformatting of various synthetic images by adjustment of scanning parameters such as repetition time (TR) and echo time (TE). Optimized MR images can be reformatted from T1, T2, and proton density (PD) values to achieve maximum tissue contrast between joint fluid and adjacent soft tissue. Purpose To demonstrate the method for optimization of TR and TE by synthetic MRI and to validate the optimized images by comparison with conventional shoulder MR arthrography (MRA) images. Material and Methods Thirty-seven shoulder MRA images acquired by synthetic MRI were retrospectively evaluated for PD, T1, and T2 values at the joint fluid and glenoid labrum. Differences in signal intensity between the fluid and labrum were observed between TR of 500-6000 ms and TE of 80-300 ms in T2-weighted (T2W) images. Conventional T2W and synthetic images were analyzed for diagnostic agreement of supraspinatus tendon abnormalities (kappa statistics) and image quality scores (one-way analysis of variance with post-hoc analysis). Results Optimized mean values of TR and TE were 2724.7 ± 1634.7 and 80.1 ± 0.4, respectively. Diagnostic agreement for supraspinatus tendon abnormalities between conventional and synthetic MR images was excellent (κ = 0.882). The mean image quality score of the joint space in optimized synthetic images was significantly higher compared with those in conventional and synthetic images (2.861 ± 0.351 vs. 2.556 ± 0.607 vs. 2.750 ± 0.439; P < 0.05). Conclusion Synthetic MRI with optimized TR and TE for shoulder MRA enables optimization of soft-tissue contrast.
Post space mission lumbo-pelvic neuromuscular reconditioning: a European perspective.
Evetts, Simon N; Caplan, Nick; Debuse, Dorothée; Lambrecht, Gunda; Damann, Volker; Petersen, Nora; Hides, Julie
2014-07-01
Long-duration exposure to the space environment causes physical adaptations that are deleterious to optimal functioning on Earth. Post-mission rehabilitation traditionally concentrates on regaining general muscle strength, neuromuscular control, and lumbo-pelvic stability. A particular problem is muscle imbalance caused by the hypertrophy of the flexor and atrophy of the extensor and local lumbo-pelvic muscles, increasing the risk of post-mission injury. A method currently used in European human spaceflight to aid post-mission recovery involves a motor control approach, focusing initially on teaching voluntary contraction of specific lumbo-pelvic muscles and optimizing spinal position, progressing to functional retraining in weight bearing positions. An alternative approach would be to use a Functional Readaptive Exercise Device to appropriately recruit this musculature, thus complementing current rehabilitation programs. Advances in post-mission recovery of this nature may both improve astronaut healthcare and aid terrestrial healthcare through more effective treatment of low back pain and accelerated post bed rest rehabilitation.
Krill, Lauren S; Ueda, Stefanie M; Gerardi, Melissa; Bristow, Robert E
2011-02-01
To evaluate the risk of postoperative complications related to HA-CMC use in patients undergoing optimal cytoreductive surgery for primary and recurrent ovarian, fallopian tube, and peritoneal cancers. A single institution retrospective review identified all patients undergoing optimal (≤1 cm) cytoreductive surgery for primary or recurrent ovarian, fallopian tube, and peritoneal cancers between 1/95 and 12/08. Operative details and post-operative complications (<30 days) were extracted from the medical record. Fisher's exact test, Mann-Whitney-U, and multiple regression analyses were performed to identify factors, including HA-CMC use, associated with post-operative complications. Three hundred seventy-five cases were analyzed: HA-CMC was utilized in 168 debulking procedures. There was no difference in the incidence of overall morbidity for patients with HA-CMC compared to those without HA-CMC (OR 1.07; 95% CI: 0.68-1.67). On univariate analysis, application of HA-CMC increased the risk of pelvic abscess (OR 2.66; 95% CI: 1.21-5.86), particularly in the primary surgery setting (OR 4.65; 95% CI: 1.67-12.98) and in patients undergoing hysterectomy (OR 3.36; 95% CI: 1.18-9.53). After controlling for confounding factors using multiple linear regression, HA-CMC use approached statistical significance in predicting an increased risk of pelvic abscess but not major postoperative morbidity. HA-CMC adhesion barrier placement at the time of optimal cytoreductive surgery for ovarian, fallopian tube, and peritoneal cancer is not associated with major postoperative complications but may be associated with increased risk of pelvic abscess. Copyright © 2010 Elsevier Inc. All rights reserved.
Roberts, Clare M.; Kane, Robert T.; Rooney, Rosanna M.; Pintabona, Yolanda; Baughman, Natalie; Hassan, Sharinaz; Cross, Donna; Zubrick, Stephen R.; Silburn, Sven R.
2018-01-01
The efficacy of an enhanced version of the Aussie Optimism Program (AOP) was investigated in a cluster randomized controlled trial. Grade 6 students aged 10–11 years of age (N = 2288) from 63 government primary schools in Perth, Western Australia, participated in the pre, post, and follow-up study. Schools were randomly assigned to one of three conditions: Aussie Optimism with teacher training, Aussie Optimism with teacher training plus coaching, or a usual care condition that received the regular Western Australian Health Education Curriculum. Students in the Aussie Optimism conditions received 20, 1-h lessons relating to social and interpersonal skills and optimistic thinking skills over the last 2 years of primary school. Parents in the active conditions received a parent information booklet each year, plus a self-directed program in Grade 7. Students and parents completed the Extended Strengths and Difficulties Questionnaire. Students who scored in the clinical range on the Emotional Symptoms Scale were given The Diagnostic Interview for Children and Adolescents IV, to assess suicidal ideation and behavior, and depressive and anxiety disorders. Results indicated that Aussie Optimism with teacher training plus coaching was associated with the best outcomes: a significant increase in student-reported pro-social behavior from pre-test to post-test 1 (maintained at post-test 2) and significantly lower incidence rates from suicidal ideation at post-test 2 and follow-up. No significant intervention effects on anxiety and depressive disorders, and total difficulties were reported. These findings suggest that the AOP with teacher training along with coaching may have the potential to positively impact on suicidality and pro-social behavior in the pre-adolescent years. PMID:29599729
DOE Office of Scientific and Technical Information (OSTI.GOV)
Skees, J.L.; Middlebrook, M.L.; Anthony, W.L.
1997-01-01
The objective of this program is to transfer the core GRI advanced stimulation technologies to Sonat Exploration Company for their continued use upon completion of the program. The methodology to accomplish the objective included seminars and training schools, offset well baseline analysis, fracture treatment design optimization, real-time and post-fracture treatment evaluation and documentation of economic benefits.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ramanathan, K.; Mann, J.; Glynn, S.
2012-06-01
Zn(O,S) thin films were deposited by chemical bath deposition (CBD), atomic layer deposition, and sputtering. Composition of the films and band gap were measured and found to follow the trends described in the literature. CBD Zn(O,S) parameters were optimized and resulted in an 18.5% efficiency cell that did not require post annealing, light soaking, or an undoped ZnO layer. Promising results were obtained with sputtering. A 13% efficiency cell was obtained for a Zn(O,S) emitter layer deposited with 0.5%O2. With further optimization of process parameters and an analysis of the loss mechanisms, it should be possible to increase the efficiency.
NASA Technical Reports Server (NTRS)
Raiszadeh, Ben; Queen, Eric M.
2002-01-01
A capability to simulate trajectories Of Multiple interacting rigid bodies has been developed. This capability uses the Program to Optimize Simulated Trajectories II (POST II). Previously, POST II had the ability to simulate multiple bodies without interacting forces. The current implementation is used for the Simulation of parachute trajectories, in which the parachute and suspended bodies can be treated as rigid bodies. An arbitrary set of connecting lines can be included in the model and are treated as massless spring-dampers. This paper discusses details of the connection line modeling and results of several test cases used to validate the capability.
The effect of boric acid on bacterial culture of canine and feline urine.
Rowlands, M; Blackwood, L; Mas, A; Cripps, P; Crompton, C; Burrow, R
2011-10-01
To identify the optimal method of submission of canine and feline urine for bacterial culture. Cystocentesis samples from 250 animals (200 dogs, 50 cats) suspected of having urinary tract infections were collected. The reference aliquot, without preservative, was processed on site within 2 hours. Two further aliquots (one without preservative, one with boric acid) were stored at room temperature for up to 7 hours and then posted by guaranteed next day delivery to a commercial laboratory for analysis. Forty-seven of the samples were positive on culture in the reference test. There was no significant difference between reference test results and those of samples posted without preservative (P=0·39), but samples posted in boric acid were significantly less likely to give a positive result (P=0·01). Samples posted without preservative had a sensitivity of 82% and a specificity of 98%; for boric acid, sensitivity was 73% and specificity 99%. Postal urine samples should be submitted to the laboratory in a plain sterile tube. © 2011 British Small Animal Veterinary Association.
NASA Astrophysics Data System (ADS)
Haapasalo, Erkka; Pellonpää, Juha-Pekka
2017-12-01
Various forms of optimality for quantum observables described as normalized positive-operator-valued measures (POVMs) are studied in this paper. We give characterizations for observables that determine the values of the measured quantity with probabilistic certainty or a state of the system before or after the measurement. We investigate observables that are free from noise caused by classical post-processing, mixing, or pre-processing of quantum nature. Especially, a complete characterization of pre-processing and post-processing clean observables is given, and necessary and sufficient conditions are imposed on informationally complete POVMs within the set of pure states. We also discuss joint and sequential measurements of optimal quantum observables.
Early clinical outcomes following laparoscopic inguinal hernia repair.
Tolver, Mette Astrup
2013-07-01
Laparoscopic inguinal hernia repair (TAPP) has gained increasing popularity because of less post-operative pain and a shorter duration of convalescence compared with open hernia repair technique (Lichtenstein). However, investigation of duration of convalescence with non-restrictive recommendations, and a procedure-specific characterization of the early clinical outcomes after TAPP was lacking. Furthermore, optimization of the post-operative period with fibrin sealant versus tacks for fixation of mesh, and the glucocorticoid dexamethasone versus placebo needed to be investigated in randomized clinical trials. The objective of this PhD thesis was to characterize the early clinical outcomes after TAPP and optimize the post-operative period. The four studies included in this thesis have investigated duration of convalescence and procedure-specific post-operative pain and other early clinical outcomes after TAPP. Furthermore, it has been shown that fibrin sealant can improve the early post-operative period compared with tacks, while dexamethasone showed no advantages apart from reduced use of antiemetics compared with placebo. Based on these findings, and the existing knowledge, 3-5 days of convalescence should be expected when 1 day of convalescence is recommended and future studies should focus on reducing intraabdominal pain after TAPP. Fibrin sealant can optimize the early clinical outcomes but the risk of hernia recurrence and chronic pain needs to be evaluated. Dexamethasone should be investigated in higher doses.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tang, Chad; Gomez, Daniel R.; Wang, Hongmei
Purpose: Radiation pneumonitis (RP) is an inflammatory response to radiation therapy (RT). We assessed the association between RP and white blood cell (WBC) count, an established metric of systemic inflammation, after RT for non-small cell lung cancer. Methods and Materials: We retrospectively analyzed 366 patients with non-small cell lung cancer who received ≥60 Gy as definitive therapy. The primary endpoint was whether WBC count after RT (defined as 2 weeks through 3 months after RT completion) was associated with grade ≥3 or grade ≥2 RP. Median lung volume receiving ≥20 Gy (V{sub 20}) was 31%, and post-RT WBC counts rangedmore » from 1.7 to 21.2 × 10{sup 3} WBCs/μL. Odds ratios (ORs) associating clinical variables and post-RT WBC counts with RP were calculated via logistic regression. A recursive-partitioning algorithm was used to define optimal post-RT WBC count cut points. Results: Post-RT WBC counts were significantly higher in patients with grade ≥3 RP than without (P<.05). Optimal cut points for post-RT WBC count were found to be 7.4 and 8.0 × 10{sup 3}/μL for grade ≥3 and ≥2 RP, respectively. Univariate analysis revealed significant associations between post-RT WBC count and grade ≥3 (n=46, OR=2.6, 95% confidence interval [CI] 1.4‒4.9, P=.003) and grade ≥2 RP (n=164, OR=2.0, 95% CI 1.2‒3.4, P=.01). This association held in a stepwise multivariate regression. Of note, V{sub 20} was found to be significantly associated with grade ≥2 RP (OR=2.2, 95% CI 1.2‒3.4, P=.01) and trended toward significance for grade ≥3 RP (OR=1.9, 95% CI 1.0-3.5, P=.06). Conclusions: Post-RT WBC counts were significantly and independently associated with RP and have potential utility as a diagnostic or predictive marker for this toxicity.« less
Mathematical analysis study for radar data processing and enhancement. Part 1: Radar data analysis
NASA Technical Reports Server (NTRS)
James, R.; Brownlow, J. D.
1985-01-01
A study is performed under NASA contract to evaluate data from an AN/FPS-16 radar installed for support of flight programs at Dryden Flight Research Facility of NASA Ames Research Center. The purpose of this study is to provide information necessary for improving post-flight data reduction and knowledge of accuracy of derived radar quantities. Tracking data from six flights are analyzed. Noise and bias errors in raw tracking data are determined for each of the flights. A discussion of an altiude bias error during all of the tracking missions is included. This bias error is defined by utilizing pressure altitude measurements made during survey flights. Four separate filtering methods, representative of the most widely used optimal estimation techniques for enhancement of radar tracking data, are analyzed for suitability in processing both real-time and post-mission data. Additional information regarding the radar and its measurements, including typical noise and bias errors in the range and angle measurements, is also presented. This is in two parts. This is part 1, an analysis of radar data.
Hart, Harvi F; Culvenor, Adam G; Collins, Natalie J; Ackland, David C; Cowan, Sallie M; Machotka, Zuzana; Crossley, Kay M
2016-05-01
Abnormal gait after anterior cruciate ligament reconstruction (ACLR) may contribute to development and/or progression of knee osteoarthritis. To conduct a systematic review and meta-analysis of knee kinematics and joint moments during walking after ACLR. We searched seven electronic databases and reference lists of relevant papers, for cross-sectional, human-based observational studies comparing knee joint kinematics and moments during level walking in individuals with ACLR, with the uninjured contralateral knee or healthy individuals as a control. Two independent reviewers appraised methodological quality (modified Downs and Black scale). Where possible, data were pooled by time post-ACLR (RevMan), otherwise narrative synthesis was undertaken. Thirty-four studies were included. Meta-analysis revealed significant sagittal plane deficits in ACLR knees. We found greater knee flexion angles (standardised mean difference: 1.06; 95% CI 0.39 to 1.74) and joint moments (1.61; 0.87 to 2.35) <6 months post-ACLR, compared to healthy controls. However, lower peak knee flexion angles were identified 1-3 years (-2.21; -3.16 to -1.26) and ≥3 years post-ACLR (-1.38, -2.14 to -0.62), and lower knee flexion moment 6-12 months post-ACLR (-0.76; -1.40 to -0.12). Pooled data provided strong evidence of no difference in peak knee adduction moment >3 years after ACLR (vs healthy controls) (0.09; -0.63 to 0.81). No transverse plane conclusions could be drawn. Sagittal plane biomechanics, rather than the knee adduction moment, appear to be more relevant post-ACLR. Better understanding of sagittal plane biomechanics is necessary for optimal post-operative recovery, and to potentially prevent early onset and progression of knee OA after ACLR. PROSPERO systematic review protocol registration number CRD4201400882 2. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Bustamante, Alejandro; Vilar-Bergua, Andrea; Guettier, Sophie; Sánchez-Poblet, Josep; García-Berrocoso, Teresa; Giralt, Dolors; Fluri, Felix; Topakian, Raffi; Worthmann, Hans; Hug, Andreas; Molnar, Tihamer; Waje-Andreassen, Ulrike; Katan, Mira; Smith, Craig J; Montaner, Joan
2017-04-01
We conducted a systematic review and individual participant data meta-analysis to explore the role of C-reactive protein (CRP) in early detection or prediction of post-stroke infections. CRP, an acute-phase reactant binds to the phosphocholine expressed on the surface of dead or dying cells and some bacteria, thereby activating complement and promoting phagocytosis by macrophages. We searched PubMed up to May-2015 for studies measuring CRP in stroke and evaluating post-stroke infections. Individual participants' data were merged into a single database. CRP levels were standardized and divided into quartiles. Factors independently associated with post-stroke infections were determined by logistic regression analysis and the additional predictive value of CRP was assessed by comparing areas under receiver operating characteristic curves and integrated discrimination improvement index. Data from seven studies including 699 patients were obtained. Standardized CRP levels were higher in patients with post-stroke infections beyond 24 h. Standardized CRP levels in the fourth quartile were independently associated with infection in two different logistic regression models, model 1 [stroke severity and dysphagia, odds ratio = 9.70 (3.10-30.41)] and model 2 [age, sex, and stroke severity, odds ratio = 3.21 (1.93-5.32)]. Addition of CRP improved discrimination in both models [integrated discrimination improvement = 9.83% (0.89-18.77) and 5.31% (2.83-7.79), respectively], but accuracy was only improved for model 1 (area under the curve 0.806-0.874, p = 0.036). In this study, CRP was independently associated with development of post-stroke infections, with the optimal time-window for measurement at 24-48 h. However, its additional predictive value is moderate over clinical information. Combination with other biomarkers in a panel seems a promising strategy for future studies. © 2017 International Society for Neurochemistry.
Optimism in prolonged grief and depression following loss: A three-wave longitudinal study.
Boelen, Paul A
2015-06-30
There is considerable evidence that optimism, the predisposition to have generalized favorable expectancies for the future, is associated with numerous desirable outcomes. Few studies have examined the association of optimism with emotional distress following the death of a loved one. Doing so is important, because optimism may be an important target for interventions for post-loss psychopathology. In the current study, we examined the degree to which optimism, assessed in the first year post-loss (Time 1, T1), was associated with symptom levels of prolonged grief and depression six months (Time 2, T2) and fifteen months (Time 3, T3) later, controlling for baseline symptoms and also taking into account positive automatic cognitions at T1. Findings showed that higher optimism at T1 was associated with lower concurrent prolonged grief and depression severity. Higher optimism at T1 was also inversely related with depression symptom severity at T2 and T3, but not prolonged grief severity at T2 and T3. Implications of these findings are discussed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Personality and psychosocial function after brain injury.
Malia, K; Powell, G; Torode, S
1995-10-01
A total of 74 brain-injured patients and 46 non-neurologically matched controls consecutively admitted to a specialist medical rehabilitation unit, were administered the 'Headley Court psychosocial rating scale' and four questionnaires examining personality traits of 'locus of control', 'use of humour', 'optimism' and 'easy-going disposition'. Both pre- and post-injury personality ratings were obtained. The relatives of all participants were sent the same scales. Personality changes are reported in each of the four areas; however, time post-injury appears to be a significant factor in the type of change reported; in this cross-sectional study, at 6 and 12 months post-injury, changes are noted in all variables except locus of control, whereas at 18 months post-injury only 'easy-going disposition' showed significant change, at 24 months post-injury changes were noted in all variables except optimism, and at 30 months post-injury no changes were noted. In the present study, examining a period of 2.5 years post-injury, the personality changes remain static once they have occurred. Despite widespread reports in the literature on the importance of pre- and post-trauma personality to good psychosocial functioning, the present study found that it was only an 'easy-going disposition' post-trauma that was consistently related to good psychosocial functioning. Reasons for this are discussed.
Singh, Kiran A; Spencer, A John
2004-12-01
To determine the relative pre- and post-eruption exposure effects of fluoridated water on the caries experience of different surface types of first permanent molars. Parental questionnaires covering residential history of participants were linked to the oral examinations of 6-15-year-old Australian children conducted in 1992 by the School Dental Services of South Australia and Queensland. Percentage of lifetime exposed to optimally fluoridated water pre- (PRE) and post-eruption (POST) was calculated with respect to tooth eruption age. Combined pre- and post-eruption categories were created to test PRE against POST exposure: PRE and POST = 0, PRE < POST, PRE = POST and in the range 0-90% of lifetime exposure, PRE > POST and, PRE and POST >or= 90% lifetime exposure. These categories were used as indicator variables in linear regression models with PRE and POST = 0 as reference in an analysis of first permanent molar DMFS scores overall and by surface type. Participation rates were 69.7% in South Australia (n = 9690) and 55.6% in Queensland (n = 10 195). Compared with the reference, the categories PRE > POST (beta = -0.033), PRE = POST (beta = -0.028) in the range 0-90% and, PRE and POST >or= 90% (beta = -0.055) showed significantly lower caries overall (P < 0.01), with a similar pattern for pit and fissure surface caries (beta = -0.035, -0.031 and -0.052, respectively). Only a high PRE and POST exposure decreased caries levels significantly in the approximal (beta = -0.038; P < 0.01) and free smooth surfaces (beta = -0.023; P = 0.03). Pre-eruption exposure was important for a caries preventive effect on first permanent molars in children 6-15 years old since post-eruption exposure alone could not lower caries levels significantly. For pit and fissure surfaces, a high pre-eruption exposure could decrease caries levels significantly. However, for other surface types, only a high pre- and post-eruption exposure produced a caries preventive effect.
Finding optimal vaccination strategies under parameter uncertainty using stochastic programming.
Tanner, Matthew W; Sattenspiel, Lisa; Ntaimo, Lewis
2008-10-01
We present a stochastic programming framework for finding the optimal vaccination policy for controlling infectious disease epidemics under parameter uncertainty. Stochastic programming is a popular framework for including the effects of parameter uncertainty in a mathematical optimization model. The problem is initially formulated to find the minimum cost vaccination policy under a chance-constraint. The chance-constraint requires that the probability that R(*)
Effect of Adding a Regenerator to Kornhauser's MIT "Two-Space" (Gas-Spring+Heat Exchanger) Test Rig
NASA Technical Reports Server (NTRS)
Ebiana, Asuquo B.; Gidugu, Praveen
2008-01-01
This study employed entropy-based second law post-processing analysis to characterize the various thermodynamic losses inside a 3-space solution domain (gas spring+heat exchanger+regenerator) operating under conditions of oscillating pressure and oscillating flow. The 3- space solution domain is adapted from the 2-space solution domain (gas spring+heat exchanger) in Kornhauser's MIT test rig by modifying the heat exchanger space to include a porous regenerator system. A thermal nonequilibrium model which assumes that the regenerator porous matrix and gas average temperatures can differ by several degrees at a given axial location and time during the cycle is employed. An important and primary objective of this study is the development and application of a thermodynamic loss post-processor to characterize the major thermodynamic losses inside the 3-space model. It is anticipated that the experience gained from thermodynamic loss analysis of the simple 3-space model can be extrapolated to more complex systems like the Stirling engine. It is hoped that successful development of loss post-processors will facilitate the improvement of the optimization capability of Stirling engine analysis codes through better understanding of the heat transfer and power losses. It is also anticipated that the incorporation of a successful thermal nonequilibrium model of the regenerator in Stirling engine CFD analysis codes, will improve our ability to accurately model Stirling regenerators relative to current multidimensional thermal-equilibrium porous media models.
Vaccaro, G; Pelaez, J I; Gil, J A
2016-07-01
Objective masticatory performance assessment using two-coloured specimens relies on image processing techniques; however, just a few approaches have been tested and no comparative studies are reported. The aim of this study was to present a selection procedure of the optimal image analysis method for masticatory performance assessment with a given two-coloured chewing gum. Dentate participants (n = 250; 25 ± 6·3 years) chewed red-white chewing gums for 3, 6, 9, 12, 15, 18, 21 and 25 cycles (2000 samples). Digitalised images of retrieved specimens were analysed using 122 image processing methods (IPMs) based on feature extraction algorithms (pixel values and histogram analysis). All IPMs were tested following the criteria of: normality of measurements (Kolmogorov-Smirnov), ability to detect differences among mixing states (anova corrected with post hoc Bonferroni) and moderate-to-high correlation with the number of cycles (Spearman's Rho). The optimal IPM was chosen using multiple criteria decision analysis (MCDA). Measurements provided by all IPMs proved to be normally distributed (P < 0·05), 116 proved sensible to mixing states (P < 0·05), and 35 showed moderate-to-high correlation with the number of cycles (|ρ| > 0·5; P < 0·05). The variance of the histogram of the Hue showed the highest correlation with the number of cycles (ρ = 0·792; P < 0·0001) and the highest MCDA score (optimal). The proposed procedure proved to be reliable and able to select the optimal approach among multiple IPMs. This experiment may be reproduced to identify the optimal approach for each case of locally available test foods. © 2016 John Wiley & Sons Ltd.
NASA Technical Reports Server (NTRS)
Raiszadeh, Behzad; Queen, Eric M.; Hotchko, Nathaniel J.
2009-01-01
A capability to simulate trajectories of multiple interacting rigid bodies has been developed, tested and validated. This capability uses the Program to Optimize Simulated Trajectories II (POST 2). The standard version of POST 2 allows trajectory simulation of multiple bodies without force interaction. In the current implementation, the force interaction between the parachute and the suspended bodies has been modeled using flexible lines, allowing accurate trajectory simulation of the individual bodies in flight. The POST 2 multibody capability is intended to be general purpose and applicable to any parachute entry trajectory simulation. This research paper explains the motivation for multibody parachute simulation, discusses implementation methods, and presents validation of this capability.
Meshless methods in shape optimization of linear elastic and thermoelastic solids
NASA Astrophysics Data System (ADS)
Bobaru, Florin
This dissertation proposes a meshless approach to problems in shape optimization of elastic and thermoelastic solids. The Element-free Galerkin (EFG) method is used for this purpose. The ability of the EFG to avoid remeshing, that is normally done in a Finite Element approach to correct highly distorted meshes, is clearly demonstrated by several examples. The shape optimization example of a thermal cooling fin shows a dramatic improvement in the objective compared to a previous FEM analysis. More importantly, the new solution, displaying large shape changes contrasted to the initial design, was completely missed by the FEM analysis. The EFG formulation given here for shape optimization "uncovers" new solutions that are, apparently, unobtainable via a FEM approach. This is one of the main achievements of our work. The variational formulations for the analysis problem and for the sensitivity problems are obtained with a penalty method for imposing the displacement boundary conditions. The continuum formulation is general and this facilitates 2D and 3D with minor differences from one another. Also, transient thermoelastic problems can use the present development at each time step to solve shape optimization problems for time-dependent thermal problems. For the elasticity framework, displacement sensitivity is obtained in the EFG context. Excellent agreements with analytical solutions for some test problems are obtained. The shape optimization of a fillet is carried out in great detail, and results show significant improvement of the EFG solution over the FEM or the Boundary Element Method solutions. In our approach we avoid differentiating the complicated EFG shape functions, with respect to the shape design parameters, by using a particular discretization for sensitivity calculations. Displacement and temperature sensitivities are formulated for the shape optimization of a linear thermoelastic solid. Two important examples considered in this work, the optimization of a thermal fin and of a uniformly loaded thermoelastic beam, reveal new characteristics of the EFG method in shape optimization applications. Among other advantages of the EFG method over traditional FEM treatments of shape optimization problems, some of the most important ones are shown to be: elimination of post-processing for stress and strain recovery that directly gives more accurate results in critical positions (near the boundaries, for example) for shape optimization problems; nodes movement flexibility that permits new, better shapes (previously missed by an FEM analysis) to be discovered. Several new research directions that need further consideration are exposed.
ERIC Educational Resources Information Center
Acquaye, Hannah E.
2017-01-01
Refugees report several mental health challenges associated with pre-, peri-, and post-flight conditions. Some of these challenges include fear, anxiety, hypervigilance, hyperarousal, and nightmares--symptoms that could meet the diagnostic criteria for post-traumatic stress disorder (PTSD). Despite these challenges, some refugees also report…
Hohn, Oliver; Hanke, Kirsten; Lausch, Veronika; Zimmermann, Anja; Mostafa, Saeed; Bannert, Norbert
2014-11-11
The HERV-K(HML-2) family contains the most recently integrated and best preserved endogenized proviral sequences in the human genome. All known elements have nevertheless been subjected to mutations or deletions that render expressed particles non-infectious. Moreover, these post-insertional mutations hamper the analysis of the general biological properties of this ancient virus family. The expression of consensus sequences and sequences of elements with reverted post-insertional mutations has therefore been very instrumental in overcoming this limitation. We investigated the particle morphology of a recently reconstituted HERV-K113 element termed oriHERV-K113 using thin-section electron microscopy (EM) and could demonstrate that strong overexpression by substitution of the 5'LTR for a CMV promoter and partial codon optimization altered the virus assembly type and morphology. This included a conversion from the regular C-type to an A-type morphology with a mass of cytoplasmic immature cores tethered to the cell membrane and the membranes of vesicles. Overexpression permitted the release and maturation of virions but reduced the envelope content. A weaker boost of virus expression by Staufen-1 was not sufficient to induce these morphological alterations.
Hohn, Oliver; Hanke, Kirsten; Lausch, Veronika; Zimmermann, Anja; Mostafa, Saeed; Bannert, Norbert
2014-01-01
The HERV-K(HML-2) family contains the most recently integrated and best preserved endogenized proviral sequences in the human genome. All known elements have nevertheless been subjected to mutations or deletions that render expressed particles non-infectious. Moreover, these post-insertional mutations hamper the analysis of the general biological properties of this ancient virus family. The expression of consensus sequences and sequences of elements with reverted post-insertional mutations has therefore been very instrumental in overcoming this limitation. We investigated the particle morphology of a recently reconstituted HERV-K113 element termed oriHERV-K113 using thin-section electron microscopy (EM) and could demonstrate that strong overexpression by substitution of the 5'LTR for a CMV promoter and partial codon optimization altered the virus assembly type and morphology. This included a conversion from the regular C-type to an A-type morphology with a mass of cytoplasmic immature cores tethered to the cell membrane and the membranes of vesicles. Overexpression permitted the release and maturation of virions but reduced the envelope content. A weaker boost of virus expression by Staufen-1 was not sufficient to induce these morphological alterations. PMID:25393897
NASA Astrophysics Data System (ADS)
Tiwari, Pallavi; Danish, Shabbar; Wong, Stephen; Madabhushi, Anant
2013-03-01
Laser-induced interstitial thermal therapy (LITT) has recently emerged as a new, less invasive alternative to craniotomy for treating epilepsy; which allows for focussed delivery of laser energy monitored in real time by MRI, for precise removal of the epileptogenic foci. Despite being minimally invasive, the effects of laser ablation on the epileptogenic foci (reflected by changes in MR imaging markers post-LITT) are currently unknown. In this work, we present a quantitative framework for evaluating LITT-related changes by quantifying per-voxel changes in MR imaging markers which may be more reflective of local treatment related changes (TRC) that occur post-LITT, as compared to the standard volumetric analysis which involves monitoring a more global volume change across pre-, and post-LITT MRI. Our framework focuses on three objectives: (a) development of temporal MRI signatures that characterize TRC corresponding to patients with seizure freedom by comparing differences in MR imaging markers and monitoring them over time, (b) identification of the optimal time point when early LITT induced effects (such as edema and mass effect) subside by monitoring TRC at subsequent time-points post-LITT, and (c) identification of contributions of individual MRI protocols towards characterizing LITT-TRC for epilepsy by identifying MR markers that change most dramatically over time and employ individual contributions to create a more optimal weighted MP-MRI temporal profile that can better characterize TRC compared to any individual imaging marker. A cohort of patients were monitored at different time points post-LITT via MP-MRI involving T1-w, T2-w, T2-GRE, T2-FLAIR, and apparent diffusion coefficient (ADC) protocols. Post affine registration of individual MRI protocols to a reference MRI protocol pre-LITT, differences in individual MR markers are computed on a per-voxel basis, at different time-points with respect to baseline (pre-LITT) MRI as well as across subsequent time-points. A time-dependent MRI profile corresponding to successful (seizure-free) is then created that captures changes in individual MR imaging markers over time. Our preliminary analysis on two patient studies suggests that (a) LITT related changes (attributed to swelling and edema) appear to subside within 4-weeks post-LITT, (b) ADC may be more sensitive for evaluating early TRC (up to 3-months), and T1-w may be more sensitive in evaluating early delayed TRC (1-month, 3-months), while T2-w and T2-FLAIR appeared to be more sensitive in identifying late TRC (around 6-months post-LITT) compared to the other MRI protocols under evaluation. T2-GRE was found to be only nominally sensitive in identifying TRC at any follow-up time-point post-LITT. The framework presented in this work thus serves as an important precursor to a comprehensive treatment evaluation framework that can be used to identify sensitive MR markers corresponding to patient response (seizure-freedom or seizure recurrence), with an ultimate objective of making prognostic predictions about patient outcome post-LITT.
Singh, K A; Spencer, A John; Armfield, J M
2003-01-01
Previous studies have attributed the caries-preventive effects of preeruption (PRE) and posteruption (POST) exposure to fluoridated water based on data collected before and after the commencement or discontinuation of water fluoridation. This study aims to determine the relative pre- and posteruption exposure effects of fluoridated water on caries experience of 6-15-year-old Australian children based on individual residential histories. Parental questionnaires covering residential history of participants were linked to their oral examinations conducted between June 1991 and May 1992 by the School Dental Services of South Australia and Queensland. Percentage of lifetime exposed to optimally fluoridated water PRE and POST was calculated with respect to the eruption age for first permanent molars. Combined pre- and posteruption categories were created to test PRE against POST exposure: PRE & POST = 0, PRE < POST, PRE = POST in the range 0-90 percent of lifetime exposure, PRE > POST, and PRE & POST > or = 90 percent lifetime exposure. These categories were used as indicator variables with PRE and POST = 0 as reference in an analysis of first permanent molar DMFS scores. The linear regression model controlled for important potential confounders. Participation rates were 69.7 percent in South Australia and 55.6 percent in Queensland with 9,690 and 10,195 participants, respectively. Pre- and posteruption exposures were strongly correlated (r =. 74; P < .01). Compared to the reference, the categories PRE > POST, PRE = POSTin the range 0-90 percent, and PRE and POST > or = 90 percent showed significantly lower caries levels. The findings indicated that preeruption exposure was required for a caries-preventive effect and that exposure after eruption alone did not lower caries levels significantly. However, the maximum caries-preventive effects of fluoridated water were achieved by high pre- and posteruption exposure.
Suwannasom, Pannipa; Sotomi, Yohei; Ishibashi, Yuki; Cavalcante, Rafael; Albuquerque, Felipe N; Macaya, Carlos; Ormiston, John A; Hill, Jonathan; Lang, Irene M; Egred, Mohaned; Fajadet, Jean; Lesiak, Maciej; Tijssen, Jan G; Wykrzykowska, Joanna J; de Winter, Robbert J; Chevalier, Bernard; Serruys, Patrick W; Onuma, Yoshinobu
2016-06-27
The study sought to investigate the relationship between post-procedural asymmetry, expansion, and eccentricity indices of metallic everolimus-eluting stent (EES) and bioresorbable vascular scaffold (BVS) and their respective impact on clinical events at 1-year follow-up. Mechanical properties of a fully BVS are inherently different from those of permanent metallic stent. The ABSORB II (A bioresorbable everolimus-eluting scaffold versus a metallic everolimus-eluting stent for ischaemic heart disease caused by de-novo native coronary artery lesions) trial compared the BVS and metallic EES in the treatment of a de novo coronary artery stenosis. Protocol-mandated intravascular ultrasound imaging was performed pre- and post-procedure in 470 patients (162 metallic EES and 308 BVS). Asymmetry index (AI) was calculated per lesion as: (1 - minimum scaffold/stent diameter/maximum scaffold/stent diameter). Expansion index and optimal scaffold/stent expansion followed the definition of the MUSIC (Multicenter Ultrasound Stenting in Coronaries) study. Eccentricity index (EI) was calculated as the ratio of minimum and maximum scaffold/stent diameter per cross section. The incidence of device-oriented composite endpoint (DoCE) was collected. Post-procedure, the metallic EES group was more symmetric and concentric than the BVS group. Only 8.0% of the BVS arm and 20.0% of the metallic EES arm achieved optimal scaffold/stent expansion (p < 0.001). At 1 year, there was no difference in the DoCE between both devices (BVS 5.2% vs. EES 3.1%; p = 0.29). Post-procedural devices asymmetry and eccentricity were related to higher event rates while there was no relevance to the expansion status. Subsequent multivariate analysis identified that post-procedural AI >0.30 is an independent predictor of DoCE (hazard ratio: 3.43; 95% confidence interval: 1.08 to 10.92; p = 0.037). BVS implantation is more frequently associated with post-procedural asymmetric and eccentric morphology compared to metallic EES. Post-procedural devices asymmetry were independently associated with DoCE following percutaneous coronary intervention. However, this approach should be viewed as hypothesis generating due to low event rates. (ABSORB II Randomized Controlled Trial [ABSORB II]; NCT01425281). Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.
Fry, L J; Querol, S; Gomez, S G; McArdle, S; Rees, R; Madrigal, J A
2015-08-01
Advantages of using cord blood (CB) over other sources of haematopoietic progenitor cells, such as bone marrow, include the ability to cryopreserve and bank the samples until requested for a transplant. Cryopreservation requires the addition of a cryoprotectant to prevent the formation of intracellular ice during freezing. Dimethyl sulphoxide (DMSO) is commonly used at a concentration of 10% (v/v); however, there is evidence to suggest this chemical is toxic to cells as well as to patients after infusion. The toxic effects of DMSO were assessed through cell viability and in vitro functional assays in fresh and post-thaw CB samples before determining the maximum exposure time and optimal concentration for cryopreservation. A dose-dependent toxicity of DMSO was observed in fresh samples with 40% removing all viable and functional haematopoietic progenitor cells (HPC). In fresh and post-thaw analysis, minimal toxic effect was observed when cryopreservation was delayed for up to 1 h after 10% DMSO addition. After thawing, DMSO washout was superior to dilution or unmanipulated when maintained for long periods (advantage observed 1 h after thawing). Finally, the optimum concentration for cryopreserving CB was found to be 7.5 to 10% with detrimental effects observed outside of this range. These results support the use of 7.5-10% as the optimal DMSO concentration and the maximum exposure time should be limited to <1 h prior to freezing and 30 min post-thaw. © 2015 International Society of Blood Transfusion.
Giraudeau, Patrick; Guignard, Nadia; Hillion, Emilie; Baguet, Evelyne; Akoka, Serge
2007-03-12
Quantitative analysis by (1)H NMR is often hampered by heavily overlapping signals that may occur for complex mixtures, especially those containing similar compounds. Bidimensional homonuclear NMR spectroscopy can overcome this difficulty. A thorough review of acquisition and post-processing parameters was carried out to obtain accurate and precise, quantitative 2D J-resolved and DQF-COSY spectra in a much reduced time, thus limiting the spectrometer instabilities in the course of time. The number of t(1) increments was reduced as much as possible, and standard deviation was improved by optimization of spectral width, number of transients, phase cycling and apodization function. Localized polynomial baseline corrections were applied to the relevant chemical shift areas. Our method was applied to tropine-nortropine mixtures. Quantitative J-resolved spectra were obtained in less than 3 min and quantitative DQF-COSY spectra in 12 min, with an accuracy of 3% for J-spectroscopy and 2% for DQF-COSY, and a standard deviation smaller than 1%.
Agha-Mohammadi, Siamak; Hurwitz, Dennis J
2008-08-01
Bariatric surgery, particularly the Roux-en-Y gastric bypass, is currently the most effective method of sustainable weight loss for the morbidly obese patient population. Unfortunately, the nutritional adequacy of the postoperative diet has frequently been overlooked, and in the months to years that follow, many nutritional deficiencies have become apparent. Furthermore, once weight loss has reached a plateau, many patients become candidates for body contouring surgery and other aesthetic operations. The aim of this review was to highlight the nutritional deficiencies of post-bariatric surgery patients as related to planned body contouring surgery. This review was prepared by an extensive search of the bariatric surgery literature. The current data indicate that many post-bariatric surgery patients have protein-calorie malnutrition as well as various vitamins and mineral deficiencies that may limit optimal health and healing. It is essential that those plastic surgeons who treat post-bariatric surgery patients are aware of these nutritional deficiencies, which can be minimized by adhering to eating guidelines and supplemental prescriptions. Although there are many studies documenting relationships between malnutrition and poor wound healing, the optimal nutrient intake in the post-bariatric surgery state to promote wound healing is unknown. It is, however, clear that proteins, vitamin A, vitamin C, arginine, glutamine, zinc, and selenium have significant beneficial effects on wound healing and optimizing the immune system.
Simulation Framework for Rapid Entry, Descent, and Landing (EDL) Analysis. Volume 2; Appendices
NASA Technical Reports Server (NTRS)
Murri, Daniel G.
2010-01-01
The NASA Engineering and Safety Center (NESC) was requested to establish the Simulation Framework for Rapid Entry, Descent, and Landing (EDL) Analysis assessment, which involved development of an enhanced simulation architecture using the Program to Optimize Simulated Trajectories II (POST2) simulation tool. The assessment was requested to enhance the capability of the Agency to provide rapid evaluation of EDL characteristics in systems analysis studies, preliminary design, mission development and execution, and time-critical assessments. Many of the new simulation framework capabilities were developed to support the Agency EDL Systems Analysis (EDL-SA) team, that is conducting studies of the technologies and architectures that are required to enable higher mass robotic and human mission to Mars. The appendices to the original report are contained in this document.
Simulation Framework for Rapid Entry, Descent, and Landing (EDL) Analysis. Volume 1
NASA Technical Reports Server (NTRS)
Murri, Daniel G.
2010-01-01
The NASA Engineering and Safety Center (NESC) was requested to establish the Simulation Framework for Rapid Entry, Descent, and Landing (EDL) Analysis assessment, which involved development of an enhanced simulation architecture using the Program to Optimize Simulated Trajectories II (POST2) simulation tool. The assessment was requested to enhance the capability of the Agency to provide rapid evaluation of EDL characteristics in systems analysis studies, preliminary design, mission development and execution, and time-critical assessments. Many of the new simulation framework capabilities were developed to support the Agency EDL Systems Analysis (EDL-SA) team, that is conducting studies of the technologies and architectures that are required to enable higher mass robotic and human mission to Mars. The findings of the assessment are contained in this report.
Zea Escamilla, E.; Habert, G.
2015-01-01
This data article presents the life cycle inventories of 20 transitional shelter solutions. The data was gathered from the reports 8 shelter designs [1]; 10 post-disaster shelter designs [2]; the environmental impact of brick production outside of Europe [3]; and the optimization of bamboo-based post-disaster housing units for tropical and subtropical regions using LCA methodologies [4]. These reports include bill of quantities, plans, performance analysis, and lifespan of the studied shelters. The data from these reports was used to develop the Life Cycle Inventories (LCI). All the amounts were converted from their original units (length, volume and amount) into mass (kg) units and the transport distance into ton×km. These LCIs represent the production phases of each shelter and the transportation distances for the construction materials. Two types of distances were included, local (road) and international (freight ship), which were estimated based on the area of the country of study. Furthermore, the digital visualization of the shelters is presented for each of the 20 designs. Moreover, this data article presents a summary of the results for the categories Environment, Cost and Risk and the contribution to the environmental impact from the different building components of each shelter. These results are related to the article “Global or local construction materials for post-disaster reconstruction? Sustainability assessment of 20 post-disaster shelter designs”[5] PMID:26217807
Zea Escamilla, E; Habert, G
2015-09-01
This data article presents the life cycle inventories of 20 transitional shelter solutions. The data was gathered from the reports 8 shelter designs [1]; 10 post-disaster shelter designs [2]; the environmental impact of brick production outside of Europe [3]; and the optimization of bamboo-based post-disaster housing units for tropical and subtropical regions using LCA methodologies [4]. These reports include bill of quantities, plans, performance analysis, and lifespan of the studied shelters. The data from these reports was used to develop the Life Cycle Inventories (LCI). All the amounts were converted from their original units (length, volume and amount) into mass (kg) units and the transport distance into ton×km. These LCIs represent the production phases of each shelter and the transportation distances for the construction materials. Two types of distances were included, local (road) and international (freight ship), which were estimated based on the area of the country of study. Furthermore, the digital visualization of the shelters is presented for each of the 20 designs. Moreover, this data article presents a summary of the results for the categories Environment, Cost and Risk and the contribution to the environmental impact from the different building components of each shelter. These results are related to the article "Global or local construction materials for post-disaster reconstruction? Sustainability assessment of 20 post-disaster shelter designs"[5].
NASA Astrophysics Data System (ADS)
Pla, D.; Sánchez-González, A.; Garbayo, I.; Salleras, M.; Morata, A.; Tarancón, A.
2015-10-01
The inherent limited capacity of current battery technology is not sufficient for covering the increasing power requirements of widely extended portable devices. Among other promising alternatives, recent advances in the field of micro-Solid Oxide Fuel Cells (μ-SOFCs) converted this disruptive technology into a serious candidate to power next generations of portable devices. However, the implementation of single cells in real devices, i.e. μ-SOFC stacks coupled to the required balance-of-plant elements like fuel reformers or post combustors, still remains unexplored. This work aims addressing this system-level research by proposing a new compact design of a vertically stacked device fuelled with ethanol. The feasibility and design optimization for achieving a thermally self-sustained regime and a rapid and low-power consuming start-up is studied by finite volume analysis. An optimal thermal insulation strategy is defined to maintain the steady-state operation temperature of the μ-SOFC at 973 K and an external temperature lower than 323 K. A hybrid start-up procedure, based on heaters embedded in the μ-SOFCs and heat released by chemical reactions in the post-combustion unit, is analyzed allowing start-up times below 1 min and energy consumption under 500 J. These results clearly demonstrate the feasibility of high temperature μ-SOFC power systems fuelled with hydrocarbons for portable applications, therefore, anticipating a new family of mobile and uninterrupted power generators.
Preclinical Feasibility of a Technology Framework for MRI-guided Iliac Angioplasty
Rube, Martin A.; Fernandez-Gutierrez, Fabiola; Cox, Benjamin F.; Holbrook, Andrew B.; Houston, J. Graeme; White, Richard D.; McLeod, Helen; Fatahi, Mahsa; Melzer, Andreas
2015-01-01
Purpose Interventional MRI has significant potential for image guidance of iliac angioplasty and related vascular procedures. A technology framework with in-room image display, control, communication and MRI-guided intervention techniques was designed and tested for its potential to provide safe, fast and efficient MRI-guided angioplasty of the iliac arteries. Methods A 1.5T MRI scanner was adapted for interactive imaging during endovascular procedures using new or modified interventional devices such as guidewires and catheters. A perfused vascular phantom was used for testing. Pre-, intra- and post-procedural visualization and measurement of vascular morphology and flow was implemented. A detailed analysis of X-Ray fluoroscopic angiography workflow was conducted and applied. Two interventional radiologists and one physician in training performed 39 procedures. All procedures were timed and analyzed. Results MRI-guided iliac angioplasty procedures were successfully performed with progressive adaptation of techniques and workflow. The workflow, setup and protocol enabled a reduction in table time for a dedicated MRI-guided procedure to 6 min 33 s with a mean procedure time of 9 min 2 s, comparable to the mean procedure time of 8 min 42 s for the standard X-Ray guided procedure. Conclusions MRI-guided iliac vascular interventions were found to be feasible and practical using this framework and optimized workflow. In particular the real-time flow analysis was found to be helpful for pre- and post-interventional assessments. Design optimization of the catheters and in vivo experiments are required before clinical evaluation. PMID:25102933
Essential Elements of Early Post Discharge Care of Patients with Heart Failure.
Soucier, Richard J; Miller, P Elliott; Ingrassia, Joseph J; Riello, Ralph; Desai, Nihar R; Ahmad, Tariq
2018-06-01
Heart failure is associated with an enormous burden on both patients and health care systems in the USA. Several national policy initiatives have focused on improving the quality of heart failure care, including reducing readmissions following hospitalization, which are common, costly, and, at least in part, preventable. The transition from inpatient to ambulatory care setting and the immediate post-hospitalization period present an opportunity to further optimize guideline concordant medical therapy, identify reversible issues related to worsening heart failure, and evaluate prognosis. It can also provide opportunities for medication reconciliation and optimization, consideration of device-based therapies, appropriate management of comorbidities, identification of individual barriers to care, and a discussion of goals of care based on prognosis. Recent studies suggest that attention to detail regarding patient comorbidities, barriers to care, optimization of both diuretic and neurohormonal therapies, and assessment of prognosis improve patient outcomes. Despite the fact that the transition period appears to be an optimal time to address these issues in a comprehensive manner, most patients are not referred to programs specializing in this approach post hospital discharge. The objective of this review is to provide an outline for early post discharge care that allows clinicians and other health care providers to care for these heart failure patients in a manner that is both firmly rooted in the guidelines and patient-centered. Data regarding which intervention is most likely to confer benefit to which subset of patients with this disease is lacking and warrants further study.
The One-Year Attributable Cost of Post-Stroke Dysphagia
Bonilha, Heather Shaw; Simpson, Annie N.; Ellis, Charles; Mauldin, Patrick; Martin-Harris, Bonnie; Simpson, Kit
2014-01-01
With the recent emphasis on evidence-based practice and healthcare reform, understanding the cost of dysphagia management has never been more important. It is helpful for clinicians to understand and objectively report the costs associated with dysphagia when they advocate for their services in this economy. Having carefully estimated cost of illness, inputs are needed for cost-effectiveness analyses that help support the value of treatments. This study sought to address this issue by examining the 1-year cost associated with a diagnosis of dysphagia post-stroke in South Carolina. Furthermore, this study investigated whether ethnicity and residence differences exist in the cost of dysphagia post-stroke. Data on 3,200 patients in the South Carolina Medicare database from 2004 who had ICD-9 codes for ischemic stroke, 434 and 436, were retrospectively included in this study. Differences between persons with and without dysphagia post-stroke were compared with respect to age, gender, ethnicity, mortality, length of stay, comorbidity, rurality, discharge disposition, and cost to Medicare. Univariate analyses and a gamma-distributed generalized linear multivariable model with a log link function were completed. We found that the 1-year cost to Medicare for persons with dysphagia post ischemic stroke was $4,510 higher than that for persons without dysphagia post ischemic stroke when controlling for age, comorbidities, ethnicity, and proportion of time alive. Univariate analysis revealed that rurality, ethnicity, and gender were not statistically significantly different in comparisons of individuals with or without dysphagia post-stroke. Post-stroke dysphagia significantly increases post-stroke medical expenses. Understanding the expenditures associated with post-stroke dysphagia is helpful for optimal allocation and use of resources. Such information is needed to conduct cost-effectiveness studies. PMID:24948438
Wyland, Timothy P; Van Dorin, Joshua D; Reyes, G Francis Cisco
2015-11-01
Applying accommodating resistance combined with isoinertial resistance has been demonstrated to be effective in improving neuromuscular attributes important for sport performance. The main purpose of this study was to determine whether short sprints can be acutely enhanced after several sets of back squats with or without accommodating resistance. Twenty recreationally resistance-trained males (age: 23.3 ± 4.4 years; height: 178.9 ± 6.5 cm; weight: 88.3 ± 10.8 kg) performed pre-post testing on 9.1-m sprint time. Three different interventions were implemented in randomized order between pre-post 9.1-m sprints. On 3 separate days, subjects either sat for 5 minutes (CTRL), performed 5 sets of 3 repetitions at 85% of their 1 repetition maximum (1RM) with isoinertial load (STND), or performed 5 sets of 3 repetitions at 85% of their 1RM, with 30% of the total resistance coming from elastic band tension (BAND) between pre-post 9.1-m sprint testing. Posttesting for 9.1-m sprint time occurred immediately after the last set of squats (Post-Immediate) and on every minute for 4 minutes after the last set of squats (Post-1min, Post-2min, Post-3min, and Post-4min). Repeated-measures analysis of variance statistical analyses revealed no significant changes in sprint time across posttesting times during the CTRL and STND condition. During the BAND condition, sprint time significantly decreased from Post-Immediate to Post-4min (p = 0.002). The uniqueness of accommodating resistance could create an optimal postactivation potentiation effect to increase neuromuscular performance. Coaches and athletes can implement heavy accommodating resistance exercises to their warm-up when improving acute sprint time is desired.
The one-year attributable cost of post-stroke dysphagia.
Bonilha, Heather Shaw; Simpson, Annie N; Ellis, Charles; Mauldin, Patrick; Martin-Harris, Bonnie; Simpson, Kit
2014-10-01
With the recent emphasis on evidence-based practice and healthcare reform, understanding the cost of dysphagia management has never been more important. It is helpful for clinicians to understand and objectively report the costs associated with dysphagia when they advocate for their services in this economy. Having carefully estimated cost of illness, inputs are needed for cost-effectiveness analyses that help support the value of treatments. This study sought to address this issue by examining the 1-year cost associated with a diagnosis of dysphagia post-stroke in South Carolina. Furthermore, this study investigated whether ethnicity and residence differences exist in the cost of dysphagia post-stroke. Data on 3,200 patients in the South Carolina Medicare database from 2004 who had ICD-9 codes for ischemic stroke, 434 and 436, were retrospectively included in this study. Differences between persons with and without dysphagia post-stroke were compared with respect to age, gender, ethnicity, mortality, length of stay, comorbidity, rurality, discharge disposition, and cost to Medicare. Univariate analyses and a gamma-distributed generalized linear multivariable model with a log link function were completed. We found that the 1-year cost to Medicare for persons with dysphagia post ischemic stroke was $4,510 higher than that for persons without dysphagia post ischemic stroke when controlling for age, comorbidities, ethnicity, and proportion of time alive. Univariate analysis revealed that rurality, ethnicity, and gender were not statistically significantly different in comparisons of individuals with or without dysphagia post-stroke. Post-stroke dysphagia significantly increases post-stroke medical expenses. Understanding the expenditures associated with post-stroke dysphagia is helpful for optimal allocation and use of resources. Such information is needed to conduct cost-effectiveness studies.
Image quality comparison between single energy and dual energy CT protocols for hepatic imaging
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yao, Yuan, E-mail: yuanyao@stanford.edu; Pelc, Nor
Purpose: Multi-detector computed tomography (MDCT) enables volumetric scans in a single breath hold and is clinically useful for hepatic imaging. For simple tasks, conventional single energy (SE) computed tomography (CT) images acquired at the optimal tube potential are known to have better quality than dual energy (DE) blended images. However, liver imaging is complex and often requires imaging of both structures containing iodinated contrast media, where atomic number differences are the primary contrast mechanism, and other structures, where density differences are the primary contrast mechanism. Hence it is conceivable that the broad spectrum used in a dual energy acquisition maymore » be an advantage. In this work we are interested in comparing these two imaging strategies at equal-dose and more complex settings. Methods: We developed numerical anthropomorphic phantoms to mimic realistic clinical CT scans for medium size and large size patients. MDCT images based on the defined phantoms were simulated using various SE and DE protocols at pre- and post-contrast stages. For SE CT, images from 60 kVp through 140 with 10 kVp steps were considered; for DE CT, both 80/140 and 100/140 kVp scans were simulated and linearly blended at the optimal weights. To make a fair comparison, the mAs of each scan was adjusted to match the reference radiation dose (120 kVp, 200 mAs for medium size patients and 140 kVp, 400 mAs for large size patients). Contrast-to-noise ratio (CNR) of liver against other soft tissues was used to evaluate and compare the SE and DE protocols, and multiple pre- and post-contrasted liver-tissue pairs were used to define a composite CNR. To help validate the simulation results, we conducted a small clinical study. Eighty-five 120 kVp images and 81 blended 80/140 kVp images were collected and compared through both quantitative image quality analysis and an observer study. Results: In the simulation study, we found that the CNR of pre-contrast SE image mostly increased with increasing kVp while for post-contrast imaging 90 kVp or lower yielded higher CNR images, depending on the differential iodine concentration of each tissue. Similar trends were seen in DE blended CNR and those from SE protocols. In the presence of differential iodine concentration (i.e., post-contrast), the CNR curves maximize at lower kVps (80–120), with the peak shifted rightward for larger patients. The combined pre- and post-contrast composite CNR study demonstrated that an optimal SE protocol has better performance than blended DE images, and the optimal tube potential for SE scan is around 90 kVp for a medium size patients and between 90 and 120 kVp for large size patients (although low kVp imaging requires high x-ray tube power to avoid photon starvation). Also, a tin filter added to the high kVp beam is not only beneficial for material decomposition but it improves the CNR of the DE blended images as well. The dose adjusted CNR of the clinical images also showed the same trend and radiologists favored the SE scans over blended DE images. Conclusions: Our simulation showed that an optimized SE protocol produces up to 5% higher CNR for a range of clinical tasks. The clinical study also suggested 120 kVp SE scans have better image quality than blended DE images. Hence, blended DE images do not have a fundamental CNR advantage over optimized SE images.« less
End-To-End Simulation of Launch Vehicle Trajectories Including Stage Separation Dynamics
NASA Technical Reports Server (NTRS)
Albertson, Cindy W.; Tartabini, Paul V.; Pamadi, Bandu N.
2012-01-01
The development of methodologies, techniques, and tools for analysis and simulation of stage separation dynamics is critically needed for successful design and operation of multistage reusable launch vehicles. As a part of this activity, the Constraint Force Equation (CFE) methodology was developed and implemented in the Program to Optimize Simulated Trajectories II (POST2). The objective of this paper is to demonstrate the capability of POST2/CFE to simulate a complete end-to-end mission. The vehicle configuration selected was the Two-Stage-To-Orbit (TSTO) Langley Glide Back Booster (LGBB) bimese configuration, an in-house concept consisting of a reusable booster and an orbiter having identical outer mold lines. The proximity and isolated aerodynamic databases used for the simulation were assembled using wind-tunnel test data for this vehicle. POST2/CFE simulation results are presented for the entire mission, from lift-off, through stage separation, orbiter ascent to orbit, and booster glide back to the launch site. Additionally, POST2/CFE stage separation simulation results are compared with results from industry standard commercial software used for solving dynamics problems involving multiple bodies connected by joints.
Pressure Mapping and Efficiency Analysis of an EPPLER 857 Hydrokinetic Turbine
NASA Astrophysics Data System (ADS)
Clark, Tristan
A conceptual energy ship is presented to provide renewable energy. The ship, driven by the wind, drags a hydrokinetic turbine through the water. The power generated is used to run electrolysis on board, taking the resultant hydrogen back to shore to be used as an energy source. The basin efficiency (Power/thrust*velocity) of the Hydrokinetic Turbine (HTK) plays a vital role in this process. In order to extract the maximum allowable power from the flow, the blades need to be optimized. The structural analysis of the blade is important, as the blade will undergo high pressure loads from the water. A procedure for analysis of a preliminary Hydrokinetic Turbine blade design is developed. The blade was designed by a non-optimized Blade Element Momentum Theory (BEMT) code. Six simulations were run, with varying mesh resolution, turbulence models, and flow region size. The procedure was developed that provides detailed explanation for the entire process, from geometry and mesh generation to post-processing analysis tools. The efficiency results from the simulations are used to study the mesh resolution, flow region size, and turbulence models. The results are compared to the BEMT model design targets. Static pressure maps are created that can be used for structural analysis of the blades.
Current Trends in Discharge Disposition and Post-discharge Care After Total Joint Arthroplasty.
Tarity, T David; Swall, Marion M
2017-09-01
The purpose of this manuscript is to review published literature over the last 5 years to assess recent trends and influencing factors regarding discharge disposition and post-discharge care following total joint arthroplasty. We evaluated instruments proposed to predict a patient's discharge disposition and summarize reports investigating the safety in sending more patients home by reviewing complications and readmission rates. Current literature supports decreased length of hospital stay and increased discharge to home with cost savings and stable readmission rates. Surgeons with defined clinical pathways and those who shape patient expectations may more effectively control costs than those without defined pathways. Further research is needed analyzing best practices in care coordination, managing patient expectations, and cost-effective analysis of home discharge while at the same time ensuring patient outcomes are optimized following total joint arthroplasty.
Rotigotine and specific non-motor symptoms of Parkinson's disease: post hoc analysis of RECOVER.
Ray Chaudhuri, K; Martinez-Martin, Pablo; Antonini, Angelo; Brown, Richard G; Friedman, Joseph H; Onofrj, Marco; Surmann, Erwin; Ghys, Liesbet; Trenkwalder, Claudia
2013-07-01
Non-motor symptoms of Parkinson's disease (PD) represent major causes of morbidity. RECOVER, a randomized controlled trial of rotigotine transdermal system, was the first prospective controlled trial to use the Non-Motor Symptoms Scale (NMSS) as an exploratory outcome for assessment of treatment effects on non-motor symptoms in PD. Rotigotine improved NMSS total score compared with placebo, and the "Sleep/fatigue" and "Mood/apathy" domains. This post hoc analysis further characterizes the effects of rotigotine on sleep/fatigue and mood/apathy. Patients with PD and unsatisfactory early-morning motor impairment were randomized to transdermal patches of rotigotine (2-16 mg/24 h) or placebo. Treatment was titrated to optimal dose over 1-8 weeks, maintained for 4 weeks. The NMSS was assessed at baseline and end of treatment. Post hoc analyses are presented for individual items of the "Sleep/fatigue" and "Mood/apathy" domains. The interpretation of p-values is considered exploratory in nature. Of 287 patients randomized, NMSS data were available for 267 patients (178 rotigotine, 89 placebo). Within the "Sleep/fatigue" domain there was a significant difference, in favor of rotigotine, in change from baseline score in 1 of 5 items: "fatigue (tiredness) or lack of energy" (ANCOVA, p < 0.0001). Within the "Mood/apathy" domain, there were significant differences in favor of rotigotine in 4 of 7 items: "lost interest in surroundings" (p < 0.0001), "lost interest in doing things" (p < 0.0001), "seems sad or depressed" (p < 0.01), and "difficulty experiencing pleasure" (p < 0.05). Rotigotine transdermal system may improve non-motor symptoms such as fatigue, symptoms of depression, anhedonia, and apathy in patients with PD; further prospective controlled studies are required to confirm this post hoc analysis. Copyright © 2013 Elsevier Ltd. All rights reserved.
ERIC Educational Resources Information Center
Biddle, Christopher J.
2013-01-01
The purpose of this qualitative holistic multiple-case study was to identify the optimal theoretical approach for a Counter-Terrorism Reality-Based Training (CTRBT) model to train post-9/11 police officers to perform effectively in their counter-terrorism assignments. Post-9/11 police officers assigned to counter-terrorism duties are not trained…
Diab, Safwat Y; Isosävi, Sanna; Qouta, Samir R; Kuittinen, Saija; Punamäki, Raija-Leena
2018-02-21
Women at pre partum and post partum are especially susceptible to war trauma because they struggle to protect their infants from danger. Trauma research suggests increased problems in maternal mental health and infant development. Yet many cognitive-emotional processes affect the trauma survivors' mental health, such as post-traumatic growth and post-traumatic cognition. The aim of this study was to examine whether a mother's high post-traumatic growth and optimal post-traumatic cognition could protect their own mental health and their infant's stress regulation from the effects of traumatic war experiences. This three-wave prospective study involved Palestinian women living in the Gaza Strip who were at the second trimester of pregnancy (T1), women with infants aged 4 months (T2), and women with children aged 12 months (T3) months. The participants reported their war experiences in a 30-item checklist of losses, destruction, and atrocities in the 2008-09, 2012, and 2014 military offensives. Post-traumatic growth was assessed by a 21-item scale and post-traumatic cognition by a 36-item scale. Maternal mental health was assessed by post-traumatic stress disorder (PTSD), depressive, anxiety, and dissociation symptoms at T1 and T3, and infants' stress regulation was assessed with the Infant Behaviour Questionnaire at T2 and T3. We included 511 women at T1, 481 women at T2, and 454 women at T3. High maternal post-traumatic growth and post-traumatic cognition had protective roles. Post-traumatic growth had a protective effect on maternal mental health since severe exposure to traumatic war experiences was not associated with maternal PTSD, depression, and dissociation if women showed high post-traumatic growth, as indicated by the significant interaction effect between post-traumatic growth and war trauma on each of the three symptoms. Post-traumatic cognition had a protective effect on infant development since severe exposure was not associated with dysfunctional infant emotion regulation when mothers reported optimal post-traumatic cognition, as indicated by the significant interaction effect between post-traumatic cognition and war trauma on each of negative affectivity and surgency or extraversion. The nature of cognitive emotional processing of war trauma could explain the distinct roles of post-traumatic growth and post-traumatic cognition. High post-traumatic growth involves increased social affiliation, spiritual awareness, and psychological strengths resulting from painful and traumatic experiences. In the national struggle for independence, post-traumatic growth is often associated with heroism and even hardiness, which might benefit a mother's mental health but not their infant's wellbeing. Optimal post-traumatic cognition indicates successful and harmonious trauma processing, which enables mothers to be more reflective and sensitive to their infant's needs. Interventions to promote healthy infant development in war settings should encourage and support mothers' effective cognitive-emotional processing of traumatic experiences. The Academy of Finland and University of Tampere, Finland. Copyright © 2018 Elsevier Ltd. All rights reserved.
Stakanov, A V; Musaeva, T S
2015-01-01
We performed a retrospective analysis of case histories of acute colonic obstruction due to colon cancer A total of 291 patients were divided on two groups: 1--a control group (patients presenting risk of developing intestinal dysfunction with 'basic' therapy, n = 123); 2--the comparison group (n = 57) represented patients who were taken to optimize the post-operative period with the inclusion in the scheme of the basic treatment of serotonin adipinate. The use of serotonin adipinatein treatment of intestinal dysfunction allows fully restore bowel motility to 3rd day.
NASA Astrophysics Data System (ADS)
Rathnakar, Bharath; Prabhu, Vijendra; Rao, Bola Sadashiva Satish; Chandra, Subhash; Rai, Sharada; Mahato, Krishna Kishore
2016-12-01
The present study intends to understand the importance of cellular marker in tissue regeneration regulated upon irradiation of low power laser light in burn inflicted mice. Under anesthetic conditions, the thermal injury was induced on Swiss albino mice of either sex. Following injury, the animals were randomly divided into three groups; i. e., un-illuminated control, the group treated with 5% Povidone iodine (reference standard) and single exposure of 3 J/cm2 (830 nm). Burn tissue samples from each group were excised at day 6 post burn injury upon euthanization and used for histological and immunohistochemical analysis. Haematoxylin and Eosin (H and E) staining was performed on the selected sections to asses proliferation and angiogenesis at day 6 post-injury. For immunohistochemical analysis, tissue sections from all the three treatment groups on day 6 were stained using specific antibody against Proliferating cell nuclear antigen (PCNA). The results of the histological and immunohistochemical analysis showed improved tissue restoration in animals treated with optimal laser influence as compared to un-illuminated controls. The findings of present study clearly demonstrated the beneficial effects of 830 nm laser in burn wound healing and its influence in regulating the cellular marker.
Gorman, Dennis M; Huber, J Charles
2009-08-01
This study explores the possibility that any drug prevention program might be considered ;;evidence-based'' given the use of data analysis procedures that optimize the chance of producing statistically significant results by reanalyzing data from a Drug Abuse Resistance Education (DARE) program evaluation. The analysis produced a number of statistically significant differences between the DARE and control conditions on alcohol and marijuana use measures. Many of these differences occurred at cutoff points on the assessment scales for which post hoc meaningful labels were created. Our results are compared to those from evaluations of programs that appear on evidence-based drug prevention lists.
de Lorenzo-Pinto, Ana; Herranz-Alonso, Ana; Cuéllar-Basterrechea, Begoña; Bellón-Cano, José María; Sanjurjo-Sáez, María; Bueno, Héctor
2017-10-01
To evaluate the clinical and economic impact of a multidisciplinary program to reduce bleeding events in patients with acute coronary syndrome through optimization of antithrombotic therapy. We designed a preintervention (PRE) and postintervention (POST) quasi-experimental study using a retrospective analysis of 2 cohorts. The first cohort was analyzed to detect correctable measures contributing to bleeding (PRE). Afterward, a quality improvement intervention with a bundle of recommendations was implemented. Finally, a second cohort of patients was evaluated to investigate the impact of the measures on bleeding reduction (POST). The impact on health outcomes was evaluated through comparison of the percentage of in-hospital bleeding events and 30-day readmissions between the 2 cohorts. The economic analysis took into account the costs associated with the implementation of the program and the cost-savings associated with the prevention of bleeding events and 30-day readmissions. A total of 677 patients were included (377 in PRE and 300 in POST). The total bleeding rate was reduced after the implementation of the bundled intervention by 29.2% (31.6% in POST vs 22.3% in PRE; OR, 0.62; 95%CI, 0.44-0.88) while 30-day readmission rates were 7.7% in PRE and 5% in POST (P=.20). The estimated avoided cost was €95 113.6 per year, meaning that €10.1 would be obtained in return for each euro invested during the first year and €36.3 during the following years. This multidisciplinary program has proven to be effective in reducing bleeding events and is economically attractive. Copyright © 2016 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.
Vu, M M; Galiano, R D; Souza, J M; Du Qin, C; Kim, J Y S
2016-08-01
Monitored anesthesia care with intravenous sedation (MAC/IV), recently proposed as a good choice for hernia repair, has faster recovery and better patient satisfaction than general anesthesia; however the possibility of oversedation and respiratory distress is a widespread concern. There is a paucity of the literature examining umbilical hernia repairs (UHR) and optimal anesthesia choice, despite its importance in determining clinical outcomes. A retrospective analysis of anesthesia type in UHR was performed in the National Surgical Quality Improvement Program 2005-2013 database. General anesthesia and MAC/IV groups were propensity-score-matched (PSM) to reduce treatment selection bias. Surgical complications, medical complications, and post-operative hospital stays exceeding 1 day were the primary outcomes of interest. Pre-operative characteristics and post-operative outcomes were compared between the two anesthesia groups using univariate and multivariate statistics. PSM removed all observed differences between the two groups (p > 0.05 for all tracked pre-operative characteristics). MAC/IV cases required fewer post-operative hospital stays exceeding 1 day (3.5 vs 6.3 %, p < 0.001). Univariate analysis showed that overall complication rate did not differ (1.7 vs 1.8 %, p = 0.569), however MAC/IV cases resulted in fewer incidences of septic shock (<0.1 vs 0.1 %, p = 0.016). After multivariate logistic regression, MAC/IV was revealed to yield significantly lower chances of overall medical complications (OR = 0.654, p = 0.046). UHR under MAC/IV causes fewer medical complications and reduces post-operative hospital stays compared to general anesthesia. The implications for surgeons and patients are broad, including improved surgical safety, cost-effective care, and patient satisfaction.
From a 2DE-gel spot to protein function: lesson learned from HS1 in chronic lymphocytic leukemia.
Apollonio, Benedetta; Bertilaccio, Maria Teresa Sabrina; Restuccia, Umberto; Ranghetti, Pamela; Barbaglio, Federica; Ghia, Paolo; Caligaris-Cappio, Federico; Scielzo, Cristina
2014-10-19
The identification of molecules involved in tumor initiation and progression is fundamental for understanding disease's biology and, as a consequence, for the clinical management of patients. In the present work we will describe an optimized proteomic approach for the identification of molecules involved in the progression of Chronic Lymphocytic Leukemia (CLL). In detail, leukemic cell lysates are resolved by 2-dimensional Electrophoresis (2DE) and visualized as "spots" on the 2DE gels. Comparative analysis of proteomic maps allows the identification of differentially expressed proteins (in terms of abundance and post-translational modifications) that are picked, isolated and identified by Mass Spectrometry (MS). The biological function of the identified candidates can be tested by different assays (i.e. migration, adhesion and F-actin polymerization), that we have optimized for primary leukemic cells.
2015-01-01
Background Recently, a wide range of diseases have been associated with changes in DNA methylation levels, which play a vital role in gene expression regulation. With ongoing developments in technology, attempts to understand disease mechanism have benefited greatly from epigenetics and transcriptomics studies. In this work, we have used expression and methylation data of thyroid carcinoma as a case study and explored how to optimally incorporate expression and methylation information into the disease study when both data are available. Moreover, we have also investigated whether there are important post-translational modifiers which could drive critical insights on thyroid cancer genetics. Results In this study, we have conducted a threshold analysis for varying methylation levels to identify whether setting a methylation level threshold increases the performance of functional enrichment. Moreover, in order to decide on best-performing analysis strategy, we have performed data integration analysis including comparison of 10 different analysis strategies. As a result, combining methylation with expression and using genes with more than 15% methylation change led to optimal detection rate of thyroid-cancer associated pathways in top 20 functional enrichment results. Furthermore, pooling the data from different experiments increased analysis confidence by improving the data range. Consequently, we have identified 207 transcription factors and 245 post-translational modifiers with more than 15% methylation change which may be important in understanding underlying mechanisms of thyroid cancer. Conclusion While only expression or only methylation information would not reveal both primary and secondary mechanisms involved in disease state, combining expression and methylation led to a better detection of thyroid cancer-related genes and pathways that are found in the recent literature. Moreover, focusing on genes that have certain level of methylation change improved the functional enrichment results, revealing the core pathways involved in disease development such as; endocytosis, apoptosis, glutamatergic synapse, MAPK, ErbB, TGF-beta and Toll-like receptor pathways. Overall, in addition to novel analysis framework, our study reveals important thyroid-cancer related mechanisms, secondary molecular alterations and contributes to better knowledge of thyroid cancer aetiology. PMID:26678064
Hensler, David; Richardson, Chad L; Brown, Joslyn; Tseng, Christine; DeCamp, Phyllis J; Yang, Amy; Pawlowski, Anna; Ho, Bing; Ison, Michael G
2018-04-01
Prophylaxis with valganciclovir reduces the incidence of cytomegalovirus (CMV) infection following solid organ transplant (SOT). Under-dosing of valganciclovir is associated with an increased risk of CMV infection and development of ganciclovir-resistant CMV. An automated electronic health record (EHR)-based, pharmacist-driven program was developed to optimize dosing of valganciclovir in solid organ transplant recipients at a large transplant center. Two cohorts of kidney, pancreas-kidney, and liver transplant recipients from our center pre-implementation (April 2011-March 2012, n = 303) and post-implementation of the optimization program (September 2012-August 2013, n=263) had demographic and key outcomes data collected for 1 year post-transplant. The 1-year incidence of CMV infection dropped from 56 (18.5%) to 32 (12.2%, P = .05) and the incidence of breakthrough infections on prophylaxis was cut in half (61% vs 34%, P = .03) after implementation of the dose optimization program. The hazard ratio of developing CMV was 1.64 (95% CI 1.06-2.60, P = .027) for the pre-implementation group after adjusting for potential confounders. The program also resulted in a numerical reduction in the number of ganciclovir-resistant CMV cases (2 [0.7%] pre-implementation vs 0 post-implementation). An EHR-based, pharmacist-driven valganciclovir dose optimization program was associated with reduction in CMV infections. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Combined design of structures and controllers for optimal maneuverability
NASA Technical Reports Server (NTRS)
Ling, Jer; Kabamba, Pierre; Taylor, John
1990-01-01
Approaches to the combined design of structures and controllers for achieving optimal maneuverability are presented. A maneuverability index which directly reflects the minimum time required to perform a given set of maneuvers is introduced. By designing the flexible appendages, the maneuver time of the spacecraft is minimized under the constraints of structural properties, and post maneuver spillover is kept within a specified bound. The spillover reduction is achieved by making use of an appropriate reduced order model. The distributed parameter design problem is approached using assumed shape functions, and finite element analysis with dynamic reduction. Solution procedures have been investigated. Approximate design methods have been developed to overcome the computational difficulties. Some new constraints on the modal frequencies of the spacecraft are introduced in the original optimization problem to facilitate the solution process. It is shown that the global optimal design may be obtained by tuning the natural frequencies to satisfy specific constraints. Researchers quantify the difference between a lower bound to the solution for maneuver time associated with the original problem and the estimate obtained from the modified problem, for a specified application requirement. Numerical examples are presented to demonstrate the capability of this approach.
Kim, Jin Hee; Joo, Chul Woong; Lee, Jonghee; Seo, Yoon Kyung; Han, Joo Won; Oh, Ji Yoon; Kim, Jong Su; Yu, Seunggun; Lee, Jae Hyun; Lee, Jeong-Ik; Yun, Changhun; Choi, Bum Ho; Kim, Yong Hyun
2016-09-01
Highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PSS) films as transparent electrodes for organic light-emitting diodes (OLEDs) are doped with a new solvent 1,3-dimethyl-2-imidazolidinone (DMI) and are optimized using solvent post-treatment. The DMI doped PSS films show significantly enhanced conductivities up to 812.1 S cm(-1) . The sheet resistance of the PSS films doped with DMI is further reduced by various solvent post-treatment. The effect of solvent post-treatment on DMI doped PSS films is investigated and is shown to reduce insulating PSS in the conductive films. The solvent posttreated PSS films are successfully employed as transparent electrodes in white OLEDs. It is shown that the efficiency of OLEDs with the optimized DMI doped PSS films is higher than that of reference OLEDs doped with a conventional solvent (ethylene glycol). The results present that the optimized PSS films with the new solvent of DMI can be a promising transparent electrode for low-cost, efficient ITO-free white OLEDs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Organ allocation in pediatric renal transplants: is there an optimal donor?
Pitt, Susan C; Vachharajani, Neeta; Doyle, Maria B; Lowell, Jeffrey A; Chapman, William C; Anderson, Christopher D; Shenoy, Surendra; Wellen, Jason R
2013-01-01
The 2005 revised allocation scheme for pediatric renal transplantation made the decision of whether to transplant an available living-donor (LD) kidney or use a deceased-donor (DD) kidney controversial. The aim of this study was to examine kidney allograft utilization, sensitization, and outcomes of pediatric transplant recipients. Between January 2000 and December 2009, 91 consecutive pediatric kidney recipients (<20 yr) were transplanted. The LD (n = 38) and DD (n = 53) groups were similar in age, gender, dialysis status at transplant, warm ischemia time, and overall patient survival. LD recipients were more likely to be Caucasian (92 vs. 69%), receive older allografts (39 ± 10 vs. 23 ± 9 yr), and have fewer human leukocyte antigen (HLA) mismatches (3.3 ± 1.6 vs. 4.4 ± 1.5, p < 0.01 for all). Graft survival at one, three, and five yr post-transplant was longer for LD recipients (97%, 91%, 87% vs. DD 89%, 79%, 58%, respectively, p < 0.05). At the time of transplant, 17 (33%) DD recipients had an available LD (mean age 40 yr). A greater proportion of all patients were moderately (PRA 21-79%) sensitized post-transplant (p < 0.05). A multivariable analysis of graft survival indicated that the advantage in LD organs was likely due to fewer HLA mismatched in this group. Nonetheless, LD organs appear to provide optimal outcomes in pediatric renal transplants when considering the risk of becoming sensitized post-transplant complicating later use of the LD kidney. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Tošić, Snežana B; Mitić, Snežana S; Velimirović, Dragan S; Stojanović, Gordana S; Pavlović, Aleksandra N; Pecev-Marinković, Emilija T
2015-08-30
An inductively coupled plasma-optical emission spectrometry method for the speedy simultaneous detection of 19 elements in edible nuts (walnuts: Juglans nigra; almonds: Prunus dulcis; hazelnuts: Corylus avellana; Brazil nuts: Bertholletia excelsa; cashews: Anacardium occidentalle; pistachios: Pistacia vera; and peanuts: Arachis hypogaea) available on the Serbian markets, was optimized and validated through the selection of instrumental parameters and analytical lines free from spectral interference and with the lowest matrix effects. The analysed macro-elements were present in the following descending order: Na > Mg > Ca > K. Of all the trace elements, the tested samples showed the highest content of Fe. The micro-element Se was detected in all the samples of nuts. The toxic elements As, Cd and Pb were either not detected or the contents were below the limit of detection. One-way analysis of variance, Student's t-test, Tukey's HSD post hoc test and hierarchical agglomerative cluster analysis were applied in the statistical analysis of the results. Based on the detected content of analysed elements it can be concluded that nuts may be a good additional source of minerals as micronutrients. © 2014 Society of Chemical Industry.
Shahabazuddin, Md; Sarat Chandra, T; Meena, S; Sukumaran, R K; Shetty, N P; Mudliar, S N
2018-04-21
Thermal assisted alkaline pretreatment (TAAP) of rice husk (RH) was investigated to facilitate enzymatic saccharification by enhancing the enzyme accessibility to cellulosic components. Statistically guided experiments based on the Box-Behnken design involving four factors viz. biomass loading, particle size, NaOH loading and reaction time was considered for optimization. The maximum sugar yield of 371 mg g -1 biomass was obtained at optimized pretreatment condition [biomass loading (10% w/w), particle size (0.25-0.625 mm), NaOH loading (2% w/w), and reaction time (40 min)]. The TAAP of RH resulted in the efficient removal of lignin (14.9-54% (w/w)) with low hemicellulose solubilization [10.7-33.1% (w/w)] and with a simultaneous increase in cellulose concentration [32.65-51.65% (w/w)]. The SEM analysis indicated increased porosity and biomass disruption during TAAP. The FTIR analysis showed progressive removal of noncellulosic constituents, and XRD analysis revealed an increase in cellulose crystallinity post-TAAP indicating the effectiveness of pretreatment. Copyright © 2018 Elsevier Ltd. All rights reserved.
DNA melting analysis: application of the "open tube" format for detection of mutant KRAS.
Botezatu, Irina V; Kondratova, Valentina N; Shelepov, Valery P; Lichtenstein, Anatoly V
2011-12-15
High-resolution melting (HRM) analysis is a very effective method for genotyping and mutation scanning that is usually performed just after PCR amplification (the "closed tube" format). Though simple and convenient, the closed tube format makes the HRM dependent on the PCR mix, not generally optimal for DNA melting analysis. Here, the "open tube" format, namely the post-PCR optimization procedure (amplicon shortening and solution chemistry modification), is proposed. As a result, mutation scanning of short amplicons becomes feasible on a standard real-time PCR instrument (not primarily designed for HRM) using SYBR Green I. This approach has allowed us to considerably enhance the sensitivity of detecting mutant KRAS using both low- and high-resolution systems (the Bio-Rad iQ5-SYBR Green I and Bio-Rad CFX96-EvaGreen, respectively). The open tube format, though more laborious than the closed tube one, can be used in situations when maximal sensitivity of the method is needed. It also permits standardization of DNA melting experiments and the introduction of instruments of a "lower level" into the range of those suitable for mutation scanning. Copyright © 2011 Elsevier Inc. All rights reserved.
Han, X F; Guo, X; Li, T Z; Liu, G R; Huang, L J
2017-12-18
To evaluate the efficiency of thoracic endovascular aortic repair (TEVAR) in dealing with abdominal aortic branch malperfusion based on the analysis of aortic computed tomography angiography (CTA) images in pre- and post-TEVAR. Retrospective analysis from September 2015 to March 2016 in single institution to 32 patients, diagnosed as Stanford B aortic dissection with abdominal aortic branch malperfusion, CTA images in pre- and post-TEVAR were collected. Based on the aortic branch malperfusion pattern redefined by Nagamine, we identified and characterized branch malperfusion pattern for four abdominal aortic branches (celiac trunk, superior mesenteric artery, bilateral renal artery) in statistical analysis. In the four abdominal aortic branches (total 128 branches), 86 branches (67.2%) expressed with Class I patterns, in which subtype I-b presented with 0.8%, subtype I-c with 5.5%; 14 branches (10.9%) expressed with Class II patterns, in which subtype II-b-1 with 3.9%, subtype II-b-2 with 3.1%; 16 branches (12.5%) expressed with Class III patterns, all with subtype III-a, no subtype III-b and III-c presented. The remaining 12 branches were normal. The 100% successful rate of TEVAR obtained in 32 patients performed. The mean following-up was 4 months. Aortic CTA showed that among the 14 "high-risk" abdominal aortic branch malperfusion, 13 (92.9%) with obvious branch malperfusion in post-TEVAR were observed to improve, and the remaining one branch malperfusion (7.1%) was observed to change from subtype I-b to I-c. Few ratios in abdominal aortic branches suffered with obvious malperfusion complicated by Stanford B aortic dissection. For branches with "high-risk" malperfusion pattern, optimal changes were observed in abdominal aortic branch without revascularization in post-TEVAR, as well other branches with non-"high-risk" pattern perfusion were mostly stable in post-TEVAR. It could be of profound benefit to extend branch malperfusion patterns redefined by Nagamine in clinical practice to assess aortic dissection and in further guide for revascularization or not.
Carnovale, Carla; Brusadelli, Tatiana; Zuccotti, GianVincenzo; Beretta, Silvia; Sullo, Maria Giuseppa; Capuano, Annalisa; Rossi, Francesco; Moschini, Martina; Mugelli, Alessandro; Vannacci, Alfredo; Laterza, Marcella; Clementi, Emilio; Radice, Sonia
2014-09-01
To gain information on safety of drugs used in pediatrics through a 4-year post-marketing active pharmacovigilance program. The program sampled the Italian population and was termed 'Monitoring of the Adverse Effects in Pediatric population' (MEAP). Adverse drug reactions (ADRs) were collected for individuals aged 0 - 17 years treated in hospitals and territorial health services in Lombardy, Tuscany, Apulia and Campania; located to gain an appropriate sampling of the population. ADRs were evaluated using the Adverse Drug Reaction Probability Scale (Naranjo) and analyzed with respect to time, age, sex, category of ADR, seriousness, suspected medicines, type of reporter and off-label use. We collected and analyzed reports from 3539 ADRs. Vaccines, antineoplastic and psychotropic drugs were the most frequently pharmacotherapeutic subgroups involved. Seventeen percent of reported ADRs were serious; of them fever, vomiting and angioedema were the most frequently reported. Eight percent of ADRs were associated with off-label use, and 10% were unknown ADRs. Analysis of these revealed possible strategies of therapy optimization. The MEAP project demonstrated that active post-marketing pharmacovigilance programs are a valid strategy to increase awareness on pediatric pharmacology, reduce underreporting and provide information on drug actions in pediatrics. This information enhances drug therapy optimization in the pediatric patients.
NASA Astrophysics Data System (ADS)
Henze, Andrea; Homann, Thomas; Rohn, Isabelle; Aschner, Michael; Link, Christopher D.; Kleuser, Burkhard; Schweigert, Florian J.; Schwerdtle, Tanja; Bornhorst, Julia
2016-11-01
The visceral protein transthyretin (TTR) is frequently affected by oxidative post-translational protein modifications (PTPMs) in various diseases. Thus, better insight into structure-function relationships due to oxidative PTPMs of TTR should contribute to the understanding of pathophysiologic mechanisms. While the in vivo analysis of TTR in mammalian models is complex, time- and resource-consuming, transgenic Caenorhabditis elegans expressing hTTR provide an optimal model for the in vivo identification and characterization of drug-mediated oxidative PTPMs of hTTR by means of matrix assisted laser desorption/ionization - time of flight - mass spectrometry (MALDI-TOF-MS). Herein, we demonstrated that hTTR is expressed in all developmental stages of Caenorhabditis elegans, enabling the analysis of hTTR metabolism during the whole life-cycle. The suitability of the applied model was verified by exposing worms to D-penicillamine and menadione. Both drugs induced substantial changes in the oxidative PTPM pattern of hTTR. Additionally, for the first time a covalent binding of both drugs with hTTR was identified and verified by molecular modelling.
Shafiq, Iffat; Bulman, Zackery P; Spitznogle, Sarah L; Osorio, Justin E; Reilly, Irene S; Lesse, Alan J; Parameswaran, Ganapathi I; Mergenhagen, Kari A; Tsuji, Brian T
2017-05-01
There is an urgent need to optimize therapeutic options in patients with methicillin-resistant Staphylococcus aureus (MRSA) bacteremia who have failed conventional therapy. Two clinical isolates were obtained from a 68-year-old male with persistent MRSA bacteremia before and after the development of daptomycin nonsusceptibility. The pharmacodynamic activity of monotherapies and combinations of ceftaroline, daptomycin, cefoxitin, nafcillin and vancomycin were evaluated in time-kill experiments versus 10 8 CFU/mL of the pre- and post-daptomycin nonsusceptible MRSA isolates. Cefoxitin, nafcillin and vancomycin alone or in combination with ceftaroline failed to generate prolonged bactericidal activity against the post-daptomycin nonsusceptible isolate whereas a ceftaroline-daptomycin combination resulted in 6, 24 and 48 h log 10 (CFU/mL) reductions of 3.90, 4.40 and 6.32. Population analysis profiles revealed a daptomycin heteroresistant subpopulation of the pre-daptomycin nonsusceptible MRSA isolate that expanded by >10,000× on daptomycin agar containing 2-16 mg/L in the post-daptomycin nonsusceptible isolate. Daptomycin and ceftaroline combinations may be promising against persistent MRSA bacteremia.
Lu, Xinxing; Han, Hu; Xing, Nianzeng; Tian, Long
2015-09-22
To systematically assess the efficacy and safety of oral sildenafil citrate for post bilateral nerve-sparig radical prostatectomy (post-BNSRP) erectile dysfunction (ED). The following keywords: sildenafil, radical prostatectomy were used to search in Medline, Pubmed, Web of Science, Cochrane Library, CNKI, WanFang Database. The title, abstract and keywords of each article were independently screened by two reviewers. Randomized controlled trials (RCT) published between 1990 and 2014 were retrieved according to our inclusion and exclusion criteria. The efficacy and safety of oral sildenafil citrate for post-BNSRP ED were systematically assessed by meta-analysis. Four RCTs with 320 cases were included after literature retrieval and filtering. The potency rates were 32.1% (35/109) and 11.3% (7/62) between sildenafil and placebo groups after meta-analysis and showed statistically significant differences (OR = 4.66, 95% CI: 1.79-12.11). IIEF-5 score in sildenafil group was significant higher than that in the placebo group (WMD: 4.73, 95% CI: 3.26-6.19). In subgroup meta-analysis, the potency rates in high-dose, low-dose sildenafil groups and placebo groups were 30.4% (14/46), 25.0% (10/40) and 4.5% (2/44), respectively. There were statistically significant differences between the high-dose subgroup and placebo group (OR = 9.32, 95% CI: 1.96-44.23), and the low-dose subgroup and placebo group (OR = 6.99, 95% CI: 1.43-34.22). But there was no significant difference between high-dose and low-dose subgroups (OR = 1.31, 95% CI: 0.51-3.40). Compared with placebo, sildenafil has considerable efficacy for erectile function rehabilitationas as a primary treatment for post-BNSRP ED. There is no significant difference between high-dose and low-dose schedule for its efficacy. However, further studies are required to optimize treatment.
Post Occupancy Evaluation of Educational Buildings and Equipment.
ERIC Educational Resources Information Center
Watson, Chris
1997-01-01
Details the post occupancy evaluation (POE) process for public buildings. POEs are used to improve design and optimize educational building and equipment use. The evaluation participants, the method used, the results and recommendations, model schools, and classroom alterations using POE are described. (9 references.) (RE)
Xourafas, Dimitrios; Ablorh, Akweley; Clancy, Thomas E; Swanson, Richard S; Ashley, Stanley W
2016-06-01
Current literature emphasizes post-operative complications as a leading cause of post-pancreatectomy readmissions. Transitional care factors associated with potentially preventable conditions such as dehydration and failure to thrive (FTT) may play a significant role in readmission after pancreatectomy and have not been studied. Thirty-one post-pancreatectomy patients, who were readmitted for dehydration or FTT between 2009 and 2014, were compared to 141 nonreadmitted patients. Medical record review and a questionnaire-based survey, specifically designed to assess transitional care, were used to identify predictors of readmissions for dehydration or FTT. Logistic regression models were used to evaluate outcomes. On multivariable analysis, the strongest predictors of readmission for dehydration and FTT were the patient's lower educational level (P = 0.0233), the absence of family during the delivery of discharge instructions (P = 0.0098), episodic intermittent nausea at discharge (P = 0.0019), uncertainty about quantity, quality, or frequency of fluid intake (P = 0.0137), and the inability or failure to adhere to the clinician's instructions in the outpatient setting (P = 0.0048). Transitional-care-related factors are found to be associated with post-pancreatectomy readmission for dehydration and FTT. Using these results to identify high-risk patients and implement focused preventive measures combining efficient communication and optimal inpatient and outpatient management could potentially decrease readmission rates.
Hybrid Cascading Outage Analysis of Extreme Events with Optimized Corrective Actions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vallem, Mallikarjuna R.; Vyakaranam, Bharat GNVSR; Holzer, Jesse T.
2017-10-19
Power system are vulnerable to extreme contingencies (like an outage of a major generating substation) that can cause significant generation and load loss and can lead to further cascading outages of other transmission facilities and generators in the system. Some cascading outages are seen within minutes following a major contingency, which may not be captured exclusively using the dynamic simulation of the power system. The utilities plan for contingencies either based on dynamic or steady state analysis separately which may not accurately capture the impact of one process on the other. We address this gap in cascading outage analysis bymore » developing Dynamic Contingency Analysis Tool (DCAT) that can analyze hybrid dynamic and steady state behavior of the power system, including protection system models in dynamic simulations, and simulating corrective actions in post-transient steady state conditions. One of the important implemented steady state processes is to mimic operator corrective actions to mitigate aggravated states caused by dynamic cascading. This paper presents an Optimal Power Flow (OPF) based formulation for selecting corrective actions that utility operators can take during major contingency and thus automate the hybrid dynamic-steady state cascading outage process. The improved DCAT framework with OPF based corrective actions is demonstrated on IEEE 300 bus test system.« less
Vachhani, Kathak; Pagotto, Andrea; Wang, Yufa; Whyne, Cari; Nam, Diane
2018-01-03
Fracture healing is a lengthy process which fails in 5-10% of cases. Lithium, a low-cost therapeutic used in psychiatric medicine, up-regulates the canonical Wingless pathway crucial for osteoblastic mineralization in fracture healing. A design-of-experiments (DOE) methodology was used to optimize lithium administration parameters (dose, onset time and treatment duration) to enhance healing in a rat femoral fracture model. In the previously completed first stage (screening), onset time was found to significantly impact healing, with later (day 7 vs. day 3 post-fracture) treatment yielding improved maximum yield torque. The greatest strength was found in healing femurs treated at day 7 post fracture, with a low lithium dose (20 mg/kg) for 2 weeks duration. This paper describes the findings of the second (optimization) and third (verification) stages of the DOE investigation. Closed traumatic diaphyseal femur fractures were induced in 3-month old rats. Healing was evaluated on day 28 post fracture by CT-based morphometry and torsional loading. In optimization, later onset times of day 10 and 14 did not perform as well as day 7 onset. As such, efficacy of the best regimen (20 mg/kg dose given at day 7 onset for 2 weeks duration) was reassessed in a distinct cohort of animals to complete the DOE verification. A significant 44% higher maximum yield torque (primary outcome) was seen with optimized lithium treatment vs. controls, which paralleled the 46% improvement seen in the screening stage. Successful completion of this robustly designed preclinical DOE study delineates the optimal lithium regimen for enhancing preclinical long-bone fracture healing. Copyright © 2017 Elsevier Ltd. All rights reserved.
Wang, Erlong; Wang, Kaiyu; Chen, Defang; Wang, Jun; He, Yang; Long, Bo; Yang, Lei; Yang, Qian; Geng, Yi; Huang, Xiaoli; Ouyang, Ping; Lai, Weimin
2015-01-01
qPCR as a powerful and attractive methodology has been widely applied to aquaculture researches for gene expression analyses. However, the suitable reference selection is critical for normalizing target genes expression in qPCR. In the present study, six commonly used endogenous controls were selected as candidate reference genes to evaluate and analyze their expression levels, stabilities and normalization to immune-related gene IgM expression during vaccination and infection in spleen of tilapia with RefFinder and GeNorm programs. The results showed that all of these candidate reference genes exhibited transcriptional variations to some extent at different periods. Among them, EF1A was the most stable reference with RefFinder, followed by 18S rRNA, ACTB, UBCE, TUBA and GAPDH respectively and the optimal number of reference genes for IgM normalization under different experiment sets was two with GeNorm. Meanwhile, combination the Cq (quantification cycle) value and the recommended comprehensive ranking of reference genes, EF1A and ACTB, the two optimal reference genes, were used together as reference genes for accurate analysis of immune-related gene expression during vaccination and infection in Nile tilapia with qPCR. Moreover, the highest IgM expression level was at two weeks post-vaccination when normalized to EF1A, 18S rRNA, ACTB, and EF1A together with ACTB compared to one week post-vaccination before normalizing, which was also consistent with the IgM antibody titers detection by ELISA. PMID:25941937
Delnoy, Peter Paul; Ritter, Philippe; Naegele, Herbert; Orazi, Serafino; Szwed, Hanna; Zupan, Igor; Goscinska-Bis, Kinga; Anselme, Frederic; Martino, Maria; Padeletti, Luigi
2013-08-01
The long-term clinical value of the optimization of atrioventricular (AVD) and interventricular (VVD) delays in cardiac resynchronization therapy (CRT) remains controversial. We studied retrospectively the association between the frequency of AVD and VVD optimization and 1-year clinical outcomes in the 199 CRT patients who completed the Clinical Evaluation on Advanced Resynchronization study. From the 199 patients assigned to CRT-pacemaker (CRT-P) (New York Heart Association, NYHA, class III/IV, left ventricular ejection fraction <35%), two groups were retrospectively composed a posteriori on the basis of the frequency of their AVD and VVD optimization: Group 1 (n = 66) was composed of patients 'systematically' optimized at implant, at 3 and 6 months; Group 2 (n = 133) was composed of all other patients optimized 'non-systematically' (less than three times) during the 1 year study. The primary endpoint was a composite of all-cause mortality, heart failure-related hospitalization, NYHA functional class, and Quality of Life score, at 1 year. Systematic CRT optimization was associated with a higher percentage of improved patients based on the composite endpoint (85% in Group 1 vs. 61% in Group 2, P < 0.001), with fewer deaths (3% in Group 1 vs. 14% in Group 2, P = 0.014) and fewer hospitalizations (8% in Group 1 vs. 23% in Group 2, P = 0.007), at 1 year. These results further suggest that AVD and VVD frequent optimization (at implant, at 3 and 6 months) is associated with improved long-term clinical response in CRT-P patients.
Hinojosa, C A; Olivares-Cruz, S; Laparra-Escareno, H; Sanchez-Castro, S; Tamayo-Garcia, B; Anaya-Ayala, J E
2016-12-02
Post-thrombotic syndrome (PTS) is the long-term sequelae of deep venous thrombosis (DVT). PTS clinical manifestations include chronic leg pain, oedema, lipodermatosclerosis and ulcers. The objective of this study is to determine in patients with documented history of thrombophilias and DVT whether the number of previous thrombotic events and optimal anticoagulation therapy are associated with the time to venous ulcer healing following the start of compression therapy. Retrospective analysis performed in thrombophilic patients under the age of 50 years old with chronic venous ulcers secondary to DVT at the wound clinic in the National Institute of Medical Sciences and Nutrition 'Salvador Zubirán ' in Mexico City. Variables such as the number or episodes of thrombotic events, type of hypercoagulable disorder, optimal anticoagulation therapy with Warfarin monitored by therapeutic International Normalised Ratio (INR) (2-3) and compliance to compression therapy were examined. Patients that underwent superficial or perforator vein interruption or endovascular recanalisation of deep veins were excluded from the study. From a database of 29 patients with chronic venous ulcers followed in our clinic from January 1992 to September 2012, only 13 patients (61% female) met the inclusion criteria. Mean age±standard deviation (SD) was 32±12 years old. Of these, seven (54%) patients with suboptimal INR presented with an average of two previous thrombotic events and the remaining six (46%) patients with optimal INR only one event (p=0.28), the mean time to the clinical manifestation of a venous ulcer after the first episode of DVT was 39 months (range: 12-72) for patients with suboptimal INR and 82 months (range: 12-216) for those with optimal anticoagulation therapy (p=0.11). During the mean follow-up period of 52 months, all patients in optimal anticoagulation healed their ulcer; their mean time for wound healing was 44 months (range: 4-102). In the suboptimal INR group, only four healed the ulcers with an mean of 72 months (range: 2-204) (p=0.94). There seems to be an association between an optimal anticoagulation therapy with Warfarin monitored by INR and wound healing rates in thrombophilic patients with chronic venous ulcers. Further research is warranted. The authors have no conflict of interest.
MANEMO Routing in Practice: Protocol Selection, Expected Performance, and Experimental Evaluation
NASA Astrophysics Data System (ADS)
Tazaki, Hajime; van Meter, Rodney; Wakikawa, Ryuji; Wongsaardsakul, Thirapon; Kanchanasut, Kanchana; Dias de Amorim, Marcelo; Murai, Jun
Motivated by the deployment of post-disaster MANEMO (MANET for NEMO) composed of mobile routers and stations, we evaluate two candidate routing protocols through network simulation, theoretical performance analysis, and field experiments. The first protocol is the widely adopted Optimized Link State Routing protocol (OLSR) and the second is the combination of the Tree Discovery Protocol (TDP) with Network In Node Advertisement (NINA). To the best of our knowledge, this is the first time that these two protocols are compared in both theoretical and practical terms. We focus on the control overhead generated when mobile routers perform a handover. Our results confirm the correctness and operational robustness of both protocols. More interestingly, although in the general case OLSR leads to better results, TDP/NINA outperforms OLSR both in the case of sparse networks and in highly mobile networks, which correspond to the operation point of a large set of post-disaster scenarios.
PORTR: Pre-Operative and Post-Recurrence Brain Tumor Registration
Niethammer, Marc; Akbari, Hamed; Bilello, Michel; Davatzikos, Christos; Pohl, Kilian M.
2014-01-01
We propose a new method for deformable registration of pre-operative and post-recurrence brain MR scans of glioma patients. Performing this type of intra-subject registration is challenging as tumor, resection, recurrence, and edema cause large deformations, missing correspondences, and inconsistent intensity profiles between the scans. To address this challenging task, our method, called PORTR, explicitly accounts for pathological information. It segments tumor, resection cavity, and recurrence based on models specific to each scan. PORTR then uses the resulting maps to exclude pathological regions from the image-based correspondence term while simultaneously measuring the overlap between the aligned tumor and resection cavity. Embedded into a symmetric registration framework, we determine the optimal solution by taking advantage of both discrete and continuous search methods. We apply our method to scans of 24 glioma patients. Both quantitative and qualitative analysis of the results clearly show that our method is superior to other state-of-the-art approaches. PMID:24595340
Zhi, Wei; Ge, Zheng; He, Zhen; Zhang, Husen
2014-11-01
Microbial fuel cells (MFCs) employ microorganisms to recover electric energy from organic matter. However, fundamental knowledge of electrochemically active bacteria is still required to maximize MFCs power output for practical applications. This review presents microbiological and electrochemical techniques to help researchers choose the appropriate methods for the MFCs study. Pre-genomic and genomic techniques such as 16S rRNA based phylogeny and metagenomics have provided important information in the structure and genetic potential of electrode-colonizing microbial communities. Post-genomic techniques such as metatranscriptomics allow functional characterizations of electrode biofilm communities by quantifying gene expression levels. Isotope-assisted phylogenetic analysis can further link taxonomic information to microbial metabolisms. A combination of electrochemical, phylogenetic, metagenomic, and post-metagenomic techniques offers opportunities to a better understanding of the extracellular electron transfer process, which in turn can lead to process optimization for power output. Copyright © 2014 Elsevier Ltd. All rights reserved.
Buys, Roselien; Coeckelberghs, Ellen; Cornelissen, Véronique A; Goetschalckx, Kaatje; Vanhees, Luc
2016-09-01
Peak oxygen uptake is an independent predictor of mortality in patients with coronary artery disease (CAD). However, patients with CAD are not always capable of reaching peak effort, and therefore submaximal gas exchange variables such as the oxygen uptake efficiency slope (OUES) have been introduced. Baseline exercise capacity as expressed by OUES provides prognostic information and this parameter responds to training. Therefore, we aimed to assess the prognostic value of post-training OUES in patients with CAD. We included 960 patients with CAD (age 60.6 ± 9.5 years; 853 males) who completed a cardiac rehabilitation program between 2000 and 2011. The OUES was calculated before and after cardiac rehabilitation and information on mortality was obtained. The relationships of post-training OUES with all-cause and cardiovascular (CV) mortality was assessed by Cox proportional hazards regression analyses. Receiver operator characteristic curve analysis was performed in order to obtain the optimal cut-off value. During 7.37 ± 3.20 years of follow-up (range: 0.45-13.75 years), 108 patients died, among whom 47 died due to CV reasons. The post-training OUES was related to all-cause (hazard ratio: 0.50, p < 0.001) and CV (hazard ratio: 0.40, p < 0.001) mortality. When significant covariates, including baseline OUES, were entered into the Cox regression analysis, post-training OUES remained related to all-cause and CV mortality (hazard ratio: 0.40, p < 0.01 and 0.26, p < 0.01, respectively). In addition, the change in OUES due to exercise training was positively related to mortality (hazard ratio: 0.49, p < 0.01). Post-training OUES has stronger prognostic value compared to baseline OUES. The lack of improvement in exercise capacity expressed by OUES after an exercise training program relates to a worse prognosis and can help distinguish patients with favorable and unfavorable prognoses. © The European Society of Cardiology 2016.
Andrzejak, Ralph G.; Hauf, Martinus; Pollo, Claudio; Müller, Markus; Weisstanner, Christian; Wiest, Roland; Schindler, Kaspar
2015-01-01
Background Epilepsy surgery is a potentially curative treatment option for pharmacoresistent patients. If non-invasive methods alone do not allow to delineate the epileptogenic brain areas the surgical candidates undergo long-term monitoring with intracranial EEG. Visual EEG analysis is then used to identify the seizure onset zone for targeted resection as a standard procedure. Methods Despite of its great potential to assess the epileptogenicty of brain tissue, quantitative EEG analysis has not yet found its way into routine clinical practice. To demonstrate that quantitative EEG may yield clinically highly relevant information we retrospectively investigated how post-operative seizure control is associated with four selected EEG measures evaluated in the resected brain tissue and the seizure onset zone. Importantly, the exact spatial location of the intracranial electrodes was determined by coregistration of pre-operative MRI and post-implantation CT and coregistration with post-resection MRI was used to delineate the extent of tissue resection. Using data-driven thresholding, quantitative EEG results were separated into normally contributing and salient channels. Results In patients with favorable post-surgical seizure control a significantly larger fraction of salient channels in three of the four quantitative EEG measures was resected than in patients with unfavorable outcome in terms of seizure control (median over the whole peri-ictal recordings). The same statistics revealed no association with post-operative seizure control when EEG channels contributing to the seizure onset zone were studied. Conclusions We conclude that quantitative EEG measures provide clinically relevant and objective markers of target tissue, which may be used to optimize epilepsy surgery. The finding that differentiation between favorable and unfavorable outcome was better for the fraction of salient values in the resected brain tissue than in the seizure onset zone is consistent with growing evidence that spatially extended networks might be more relevant for seizure generation, evolution and termination than a single highly localized brain region (i.e. a “focus”) where seizures start. PMID:26513359
Solomon, April D; Hytinen, Madison E; McClain, Aryn M; Miller, Marilyn T; Dawson Cruz, Tracey
2018-01-01
DNA profiles have been obtained from fingerprints, but there is limited knowledge regarding DNA analysis from archived latent fingerprints-touch DNA "sandwiched" between adhesive and paper. Thus, this study sought to comparatively analyze a variety of collection and analytical methods in an effort to seek an optimized workflow for this specific sample type. Untreated and treated archived latent fingerprints were utilized to compare different biological sampling techniques, swab diluents, DNA extraction systems, DNA concentration practices, and post-amplification purification methods. Archived latent fingerprints disassembled and sampled via direct cutting, followed by DNA extracted using the QIAamp® DNA Investigator Kit, and concentration with Centri-Sep™ columns increased the odds of obtaining an STR profile. Using the recommended DNA workflow, 9 of the 10 samples provided STR profiles, which included 7-100% of the expected STR alleles and two full profiles. Thus, with carefully selected procedures, archived latent fingerprints can be a viable DNA source for criminal investigations including cold/postconviction cases. © 2017 American Academy of Forensic Sciences.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gildersleeve, C.W.
An interdisciplinary analysis of the post-Cold War world to determine the optimal strategy to attain the national interests of the United States, and the requisite logistic structure to support that strategy. The optimal solution is found to be a strategy based on multinational defense centered on a permanent force of United Nations garrison port complexes. This multilateral force would be augmented by as small a national defense force as necessary to ensure national security. The theses endeavors to reconnect the cultural and philosophical past of the United States with its immediate future. National interests are identified through examination of Americanmore » Pragmatism and the philosophies of John Locke and Jean-Jacques Rousseau. To determine the current status of common defense, based upon the Foreign Military Sales system, and analysis of current data is accomplished. Future threats to the United States are examined with special emphasis on nuclear terrorism. The ability of Islamic nations in North Africa and the Middle East to produce significant quantities of uranium is demonstrated. The grave political as well as ongoing environmental consequences of this recent capability are discussed in detail.« less
NASA Technical Reports Server (NTRS)
Blissit, J. A.
1986-01-01
Using analysis results from the post trajectory optimization program, an adaptive guidance algorithm is developed to compensate for density, aerodynamic and thrust perturbations during an atmospheric orbital plane change maneuver. The maneuver offers increased mission flexibility along with potential fuel savings for future reentry vehicles. Although designed to guide a proposed NASA Entry Research Vehicle, the algorithm is sufficiently generic for a range of future entry vehicles. The plane change analysis provides insight suggesting a straight-forward algorithm based on an optimized nominal command profile. Bank angle, angle of attack, and engine thrust level, ignition and cutoff times are modulated to adjust the vehicle's trajectory to achieve the desired end-conditions. A performance evaluation of the scheme demonstrates a capability to guide to within 0.05 degrees of the desired plane change and five nautical miles of the desired apogee altitude while maintaining heating constraints. The algorithm is tested under off-nominal conditions of + or -30% density biases, two density profile models, + or -15% aerodynamic uncertainty, and a 33% thrust loss and for various combinations of these conditions.
NASA Technical Reports Server (NTRS)
Pamadi, Bandu N.; Toniolo, Matthew D.; Tartabini, Paul V.; Roithmayr, Carlos M.; Albertson, Cindy W.; Karlgaard, Christopher D.
2016-01-01
The objective of this report is to develop and implement a physics based method for analysis and simulation of multi-body dynamics including launch vehicle stage separation. The constraint force equation (CFE) methodology discussed in this report provides such a framework for modeling constraint forces and moments acting at joints when the vehicles are still connected. Several stand-alone test cases involving various types of joints were developed to validate the CFE methodology. The results were compared with ADAMS(Registered Trademark) and Autolev, two different industry standard benchmark codes for multi-body dynamic analysis and simulations. However, these two codes are not designed for aerospace flight trajectory simulations. After this validation exercise, the CFE algorithm was implemented in Program to Optimize Simulated Trajectories II (POST2) to provide a capability to simulate end-to-end trajectories of launch vehicles including stage separation. The POST2/CFE methodology was applied to the STS-1 Space Shuttle solid rocket booster (SRB) separation and Hyper-X Research Vehicle (HXRV) separation from the Pegasus booster as a further test and validation for its application to launch vehicle stage separation problems. Finally, to demonstrate end-to-end simulation capability, POST2/CFE was applied to the ascent, orbit insertion, and booster return of a reusable two-stage-to-orbit (TSTO) vehicle concept. With these validation exercises, POST2/CFE software can be used for performing conceptual level end-to-end simulations, including launch vehicle stage separation, for problems similar to those discussed in this report.
Titan Explorer Entry, Descent and Landing Trajectory Design
NASA Technical Reports Server (NTRS)
Fisher, Jody L.; Lindberg, Robert E.; Lockwood, Mary Kae
2006-01-01
The Titan Explorer mission concept includes an orbiter, entry probe and inflatable airship designed to take remote and in-situ measurements of Titan's atmosphere. A modified entry, descent and landing trajectory at Titan that incorporates mid-air airship inflation (under a parachute) and separation is developed and examined for Titan Explorer. The feasibility of mid-air inflation and deployment of an airship under a parachute is determined by implementing and validating an airship buoyancy and inflation model in the trajectory simulation program, Program to Optimize Simulated Trajectories II (POST2). A nominal POST2 trajectory simulation case study is generated which examines different descent scenarios by varying airship inflation duration, orientation, and separation. The buoyancy model incorporation into POST2 is new to the software and may be used in future trajectory simulations. Each case from the nominal POST2 trajectory case study simulates a successful separation between the parachute and airship systems with sufficient velocity change as to alter their paths to avoid collision throughout their descent. The airship and heatshield also separate acceptably with a minimum distance of separation from the parachute system of 1.5 km. This analysis shows the feasibility of airship inflation on a parachute for different orientations, airship separation at various inflation times, and preparation for level-flight at Titan.
Kharfan-Dabaja, M A; Pidala, J; Kumar, A; Terasawa, T; Djulbegovic, B
2012-09-01
Despite therapeutic advances, relapsed/refractory CLL, particularly after fludarabine-based regimens, remains a major challenge for which optimal therapy is undefined. No randomized comparative data exist to suggest the superiority of reduced-toxicity allogeneic hematopoietic cell transplantation (RT-allo-HCT) over conventional chemo-(immuno) therapy (CCIT). By using estimates from a systematic review and by meta-analysis of available published evidence, we constructed a Markov decision model to examine these competing modalities. Cohort analysis demonstrated superior outcome for RT-allo-HCT, with a 10-month overall life expectancy (and 6-month quality-adjusted life expectancy (QALE)) advantage over CCIT. Although the model was sensitive to changes in base-case assumptions and transition probabilities, RT-allo-HCT provided superior overall life expectancy through a range of values supported by the meta-analysis. QALE was superior for RT-allo-HCT compared with CCIT. This conclusion was sensitive to change in the anticipated state utility associated with the post-allogeneic HCT state; however, RT-allo-HCT remained the optimal strategy for values supported by existing literature. This analysis provides a quantitative comparison of outcomes between RT-allo-HCT and CCIT for relapsed/refractory CLL in the absence of randomized comparative trials. Confirmation of these findings requires a prospective randomized trial, which compares the most effective RT-allo-HCT and CCIT regimens for relapsed/refractory CLL.
Using of material-technological modelling for designing production of closed die forgings
NASA Astrophysics Data System (ADS)
Ibrahim, K.; Vorel, I.; Jeníček, Š.; Káňa, J.; Aišman, D.; Kotěšovec, V.
2017-02-01
Production of forgings is a complex and demanding process which consists of a number of forging operations and, in many cases, includes post-forge heat treatment. An optimized manufacturing line is a prerequisite for obtaining prime-quality products which in turn are essential to profitable operation of a forging company. Problems may, however, arise from modifications to the manufacturing route due to changing customer needs. As a result, the production may have to be suspended temporarily to enable changeover and optimization. Using material-technological modelling, the required modifications can be tested and optimized under laboratory conditions outside the plant without disrupting the production. Thanks to material-technological modelling, the process parameters can be varied rapidly in response to changes in market requirements. Outcomes of the modelling runs include optimum parameters for the forging part’s manufacturing route, values of mechanical properties, and results of microstructure analysis. This article describes the use of material-technological modelling for exploring the impact of the amount of deformation and the rate of cooling of a particular forged part from the finish-forging temperature on its microstructure and related mechanical properties.
Optimal Sparse Upstream Sensor Placement for Hydrokinetic Turbines
NASA Astrophysics Data System (ADS)
Cavagnaro, Robert; Strom, Benjamin; Ross, Hannah; Hill, Craig; Polagye, Brian
2016-11-01
Accurate measurement of the flow field incident upon a hydrokinetic turbine is critical for performance evaluation during testing and setting boundary conditions in simulation. Additionally, turbine controllers may leverage real-time flow measurements. Particle image velocimetry (PIV) is capable of rendering a flow field over a wide spatial domain in a controlled, laboratory environment. However, PIV's lack of suitability for natural marine environments, high cost, and intensive post-processing diminish its potential for control applications. Conversely, sensors such as acoustic Doppler velocimeters (ADVs), are designed for field deployment and real-time measurement, but over a small spatial domain. Sparsity-promoting regression analysis such as LASSO is utilized to improve the efficacy of point measurements for real-time applications by determining optimal spatial placement for a small number of ADVs using a training set of PIV velocity fields and turbine data. The study is conducted in a flume (0.8 m2 cross-sectional area, 1 m/s flow) with laboratory-scale axial and cross-flow turbines. Predicted turbine performance utilizing the optimal sparse sensor network and associated regression model is compared to actual performance with corresponding PIV measurements.
The Long Exercise Test in Periodic Paralysis: A Bayesian Analysis.
Simmons, Daniel B; Lanning, Julie; Cleland, James C; Puwanant, Araya; Twydell, Paul T; Griggs, Robert C; Tawil, Rabi; Logigian, Eric L
2018-05-12
The long exercise test (LET) is used to assess the diagnosis of periodic paralysis (PP), but LET methodology and normal "cut-off" values vary. To determine optimal LET methodology and cut-offs, we reviewed LET data (abductor digiti minimi (ADM) motor response amplitude, area) from 55 PP patients (32 genetically definite) and 125 controls. Receiver operating characteristic (ROC) curves were constructed and area-under-the-curve (AUC) calculated to compare 1) peak-to-nadir versus baseline-to-nadir methodologies, and 2) amplitude versus area decrements. Using Bayesian principles, optimal "cut-off" decrements that achieved 95% post-test probability of PP were calculated for various pre-test probabilities (PreTPs). AUC was highest for peak-to-nadir methodology and equal for amplitude and area decrements. For PreTP ≤50%, optimal decrement cut-offs (peak-to-nadir) were >40% (amplitude) or >50% (area). For confirmation of PP, our data endorse the diagnostic utility of peak-to-nadir LET methodology using 40% amplitude or 50% area decrement cut-offs for PreTPs ≤50%. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.
Catalytic and thermal depolymerization of low value post-consumer high density polyethylene plastic
USDA-ARS?s Scientific Manuscript database
The feasibility of catalytic and non-catalytic pyrolytic conversion of low value post-consumer high density polyethylene (HDPE) plastic into crude oil and subsequent distillation was explored. Translation of optimized conditions for catalytic and non-catalytic pyrolysis from TGA to a bench-scale sys...
Millstein, Rachel A; Celano, Christopher M; Beale, Eleanor E; Beach, Scott R; Suarez, Laura; Belcher, Arianna M; Januzzi, James L; Huffman, Jeff C
This study examined the effects of optimism and gratitude on self-reported health behavior adherence, physical functioning and emotional well-being after an acute coronary syndrome (ACS). Among 156 patients, we examined associations between optimism and gratitude measured 2 weeks post-ACS and 6-month outcomes: adherence to medical recommendations, mental and physical health-related quality of life (HRQoL), physical functioning, depressive symptoms and anxiety. Multivariable linear regression models were used, controlling for increasing levels of adjustment. Optimism [β=.11, standard error (S.E.)=.05, P=.038] and gratitude (β=.10, S.E.=.05, P=.027) at 2 weeks were associated with subsequent self-reported adherence to medical recommendations (diet, exercise, medication adherence, stress reduction) at 6 months in fully adjusted models. Two-week optimism and gratitude were associated with improvements in mental HRQoL (optimism: β=.44, S.E.=.13, P=.001; gratitude: β=.33, S.E.=.12, P=.005) and reductions in symptoms of depression (optimism: β=-.11, S.E.=.05, P=.039; gratitude: β=-.10, S.E.=.05, P=.028) and anxiety (optimism: β=-.15, S.E.=.05, P=.004; gratitude: β=-.10, S.E.=.05, P=.034) at 6 months. Optimism and gratitude at 2 weeks post-ACS were associated with higher self-reported adherence and improved emotional well-being 6 months later, independent of negative emotional states. Optimism and gratitude may help recovery from an ACS. Interventions promoting these positive constructs could help improve adherence and well-being. Copyright © 2016 Elsevier Inc. All rights reserved.
Sanchis, Yovana; Coscollà, Clara; Roca, Marta; Yusà, Vicent
2015-06-01
An analytical strategy including both the quantitative target analysis of 8 regulated primary aromatic amines (PAAs), as well as a comprehensive post-run target screening of 77 migrating substances, was developed for nylon utensils, using liquid chromatography-orbitrap-high resolution mass spectrometry (LC-HRMS) operating in full scan mode. The accurate mass data were acquired with a resolving power of 50,000 FWHM (scan speed, 2 Hz), and by alternating two acquisition events, ESI+ with and without fragmentation. The target method was validated after statistical optimization of the main ionization and fragmentation parameters. The quantitative method presented appropriate performance to be used in official monitoring with recoveries ranging from 78% to 112%, precision in terms of Relative Standard Deviation (RSD) was less than 15%, and the limits of quantification were between 2 and 2.5 µg kg(-1). For post-target screening, a customized theoretical database was built for food contact material migrants, including bisphenols, phthalates, and other amines. For identification purposes, accurate exact mass (<5 ppm) and some diagnostic ions including fragments were used. The strategy was applied to 10 real samples collected from different retailers in the Valencian Region (Spain) during 2014. Six out of eight target PAAs were detected in at least one sample in the target analysis. The most frequently detected compounds were 4,4'-methylenedianiline and aniline, with concentrations ranging from 2.4 to 19,715 µg kg(-1) and 2.5 to 283 µg kg(-1), respectively. Two phthalates were identified and confirmed in the post-run target screening analysis. Copyright © 2015 Elsevier B.V. All rights reserved.
Hassan, Sally; Huang, Hsini; Warren, Kim; Mahdavi, Behzad; Smith, David; Jong, Simcha; Farid, Suzanne S
2016-04-01
Some allogeneic cell therapies requiring a high dose of cells for large indication groups demand a change in cell expansion technology, from planar units to microcarriers in single-use bioreactors for the market phase. The aim was to model the optimal timing for making this change. A development lifecycle cash flow framework was created to examine the implications of process changes to microcarrier cultures at different stages of a cell therapy's lifecycle. The analysis performed under assumptions used in the framework predicted that making this switch earlier in development is optimal from a total expected out-of-pocket cost perspective. From a risk-adjusted net present value view, switching at Phase I is economically competitive but a post-approval switch can offer the highest risk-adjusted net present value as the cost of switching is offset by initial market penetration with planar technologies. The framework can facilitate early decision-making during process development.
Application of CFE/POST2 for Simulation of Launch Vehicle Stage Separation
NASA Technical Reports Server (NTRS)
Pamadi, Bandu N.; Tartabini, Paul V.; Toniolo, Matthew D.; Roithmayr, Carlos M.; Karlgaard, Christopher D.; Samareh, Jamshid A.
2009-01-01
The constraint force equation (CFE) methodology provides a framework for modeling constraint forces and moments acting at joints that connect multiple vehicles. With implementation in Program to Optimize Simulated Trajectories II (POST 2), the CFE provides a capability to simulate end-to-end trajectories of launch vehicles, including stage separation. In this paper, the CFE/POST2 methodology is applied to the Shuttle-SRB separation problem as a test and validation case. The CFE/POST2 results are compared with STS-1 flight test data.
Computational Tools for Metabolic Engineering
Copeland, Wilbert B.; Bartley, Bryan A.; Chandran, Deepak; Galdzicki, Michal; Kim, Kyung H.; Sleight, Sean C.; Maranas, Costas D.; Sauro, Herbert M.
2012-01-01
A great variety of software applications are now employed in the metabolic engineering field. These applications have been created to support a wide range of experimental and analysis techniques. Computational tools are utilized throughout the metabolic engineering workflow to extract and interpret relevant information from large data sets, to present complex models in a more manageable form, and to propose efficient network design strategies. In this review, we present a number of tools that can assist in modifying and understanding cellular metabolic networks. The review covers seven areas of relevance to metabolic engineers. These include metabolic reconstruction efforts, network visualization, nucleic acid and protein engineering, metabolic flux analysis, pathway prospecting, post-structural network analysis and culture optimization. The list of available tools is extensive and we can only highlight a small, representative portion of the tools from each area. PMID:22629572
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lin, X; Sun, T; Liu, T
2014-06-01
Purpose: To evaluate the dosimetric characteristics of intensity-modulated radiotherapy (IMRT) treatment plan with beam angle optimization. Methods: Ten post-operation patients with cervical cancer were included in this analysis. Two IMRT plans using seven beams were designed in each patient. A standard coplanar equi-space beam angles were used in the first plan (plan 1), whereas the selection of beam angle was optimized by beam angle optimization algorithm in Varian Eclipse treatment planning system for the same number of beams in the second plan (plan 2). Two plans were designed for each patient with the same dose-volume constraints and prescription dose. Allmore » plans were normalized to the mean dose to PTV. The dose distribution in the target, the dose to the organs at risk and total MU were compared. Results: For conformity and homogeneity in PTV, no statistically differences were observed in the two plans. For the mean dose in bladder, plan 2 were significantly lower than plan 1(p<0.05). No statistically significant differences were observed between two plans for the mean doses in rectum, left and right femur heads. Compared with plan1, the average monitor units reduced 16% in plan 2. Conclusion: The IMRT plan based on beam angle optimization for cervical cancer could reduce the dose delivered to bladder and also reduce MU. Therefore there were some dosimetric advantages in the IMRT plan with beam angle optimization for cervical cancer.« less
Gao, JianZhao; Tao, Xue-Wen; Zhao, Jia; Feng, Yuan-Ming; Cai, Yu-Dong; Zhang, Ning
2017-01-01
Lysine acetylation, as one type of post-translational modifications (PTM), plays key roles in cellular regulations and can be involved in a variety of human diseases. However, it is often high-cost and time-consuming to use traditional experimental approaches to identify the lysine acetylation sites. Therefore, effective computational methods should be developed to predict the acetylation sites. In this study, we developed a position-specific method for epsilon lysine acetylation site prediction. Sequences of acetylated proteins were retrieved from the UniProt database. Various kinds of features such as position specific scoring matrix (PSSM), amino acid factors (AAF), and disorders were incorporated. A feature selection method based on mRMR (Maximum Relevance Minimum Redundancy) and IFS (Incremental Feature Selection) was employed. Finally, 319 optimal features were selected from total 541 features. Using the 319 optimal features to encode peptides, a predictor was constructed based on dagging. As a result, an accuracy of 69.56% with MCC of 0.2792 was achieved. We analyzed the optimal features, which suggested some important factors determining the lysine acetylation sites. We developed a position-specific method for epsilon lysine acetylation site prediction. A set of optimal features was selected. Analysis of the optimal features provided insights into the mechanism of lysine acetylation sites, providing guidance of experimental validation. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.
Optimal foraging by birds: feeder-based experiments for secondary and post-secondary students
USDA-ARS?s Scientific Manuscript database
Optimal foraging theory attempts to explain the foraging patterns observed in animals, including their choice of particular food items and foraging locations. Here, we describe three exercises designed to test hypotheses about food choice and foraging habitat preference using bird feeders. These e...
Chapdelaine, Isabelle; de Roij van Zuijdewijn, Camiel L.M.; Mostovaya, Ira M.; Lévesque, Renée; Davenport, Andrew; Blankestijn, Peter J.; Wanner, Christoph; Nubé, Menso J.; Grooteman, Muriel P.C.
2015-01-01
In post-dilution online haemodiafiltration (ol-HDF), a relationship has been demonstrated between the magnitude of the convection volume and survival. However, to achieve high convection volumes (>22 L per session) detailed notion of its determining factors is highly desirable. This manuscript summarizes practical problems and pitfalls that were encountered during the quest for high convection volumes. Specifically, it addresses issues such as type of vascular access, needles, blood flow rate, recirculation, filtration fraction, anticoagulation and dialysers. Finally, five of the main HDF systems in Europe are briefly described as far as HDF prescription and optimization of the convection volume is concerned. PMID:25815176
Additive manufacturing of reflective optics: evaluating finishing methods
NASA Astrophysics Data System (ADS)
Leuteritz, G.; Lachmayer, R.
2018-02-01
Individually shaped light distributions become more and more important in lighting technologies and thus the importance of additively manufactured reflectors increases significantly. The vast field of applications ranges from automotive lighting to medical imaging and bolsters the statement. However, the surfaces of additively manufactured reflectors suffer from insufficient optical properties even when manufactured using optimized process parameters for the Selective Laser Melting (SLM) process. Therefore post-process treatments of reflectors are necessary in order to further enhance their optical quality. This work concentrates on the effectiveness of post-process procedures for reflective optics. Based on already optimized aluminum reflectors, which are manufactured with a SLM machine, the parts are differently machined after the SLM process. Selected finishing methods like laser polishing, sputtering or sand blasting are applied and their effects quantified and compared. The post-process procedures are investigated on their impact on surface roughness and reflectance as well as geometrical precision. For each finishing method a demonstrator will be created and compared to a fully milled sample and among themselves. Ultimately, guidelines are developed in order to figure out the optimal treatment of additively manufactured reflectors regarding their optical and geometrical properties. Simulations of the light distributions will be validated with the developed demonstrators.
NASA Astrophysics Data System (ADS)
Solomatine, Dimitri; Mazzoleni, Maurizio; Alfonso, Leonardo; Chacon Hurtado, Juan Carlos
2017-04-01
Traditionally, static physical sensors are used to calibrate, validate or update water-system models by water authorities to reduce predictive uncertainty. However, the main problem is scarcity of data in both spatial and temporal domains due to costly maintenance and personnel. On the other hand, the use of low-cost sensor to measure hydrological variables in a more distributed and crowdsourced way is currently expanding and creating a fertile ground to the spread of citizen observatories activities and citizen science projects. Among different citizen sciences projects, the EU-funded projects WeSenseIt (www.wesenseit.eu) and GroundTruth (www.gt20.eu) aim at developing technologies and tools supporting creation of citizen observatories. A drawback of using crowdsourced observations is related to their intrinsic uncertainty and variable life span. Current flood forecasting applications limit the use of crowdsourced observations. Although some efforts to validate model results against these observations have been made, these are mainly done in a post-event analysis. Socio-hydroinformatics aims to integrate hydroinformatics tools and citizen observatories to achieve a dynamic and bidirectional feedbacks between coupled human-water systems. On the one hand, the main technical motivation of socio-hydroinformatics is to fill the gap in hydrological applications regarding the optimal use of crowdsourced observations not only in post-event analyses but in also in real time by their optimal assimilation. On the other hand, the social motivation is to bring citizens closer to decision-making processes and to understand how their participation in the model development process could improve models. In this study, different methods were developed and implemented to optimally design networks of dynamic sensors and assimilate crowdsourced observations, with varying spatial and temporal coverage, into hydrological and hydraulic models. This very first study of socio-hydroinformatics can be a potential application demonstrates that citizens not only play an active role in information capturing, evaluation and communication, but also help to improve models and thus increase flood resilience.
NASA Technical Reports Server (NTRS)
Lovelace, Jeffrey J.; Cios, Krzysztof J.; Roth, Don J.; Cao, Wei
2000-01-01
Post-Scan Interactive Data Display (PSIDD) III is a user-oriented Windows-based system that facilitates the display and comparison of ultrasonic contact data. The system is optimized to compare ultrasonic measurements made at different locations within a material or at different stages of material degradation. PSIDD III provides complete analysis of the primary wave forms in the time and frequency domains along with the calculation of several frequency dependent properties including Phase Velocity and Attenuation Coefficient and several frequency independent properties, like the Cross Correlation Velocity. The system allows image generation on all of the frequency dependent properties at any available frequency (limited by the bandwidth used in the scans) and on any of the frequency independent properties. From ultrasonic contact scans, areas of interest on an image can be studied with regard to underlying raw waveforms and derived ultrasonic properties by simply selecting the point on the image. The system offers various modes of in-depth comparison between scan points. Up to five scan points can be selected for comparative analysis at once. The system was developed with Borland Delphi software (Visual Pascal) and is based on a SQL database. It is ideal for classification of material properties, or location of microstructure variations in materials.
Couch, Stephanie; Zieba, Dominique; Van der Linde, Jeannie; Van der Merwe, Anita
2015-03-26
As a professional voice user, it is imperative that a speech-language pathologist's(SLP) vocal effectiveness remain consistent throughout the day. Many factors may contribute to reduced vocal effectiveness, including prolonged voice use, vocally abusive behaviours,poor vocal hygiene and environmental factors. To determine the effect of service delivery on the perceptual and acoustic features of voice. A quasi-experimental., pre-test-post-test research design was used. Participants included third- and final-year speech-language pathology students at the University of Pretoria(South Africa). Voice parameters were evaluated in a pre-test measurement, after which the participants provided two consecutive hours of therapy. A post-test measurement was then completed. Data analysis consisted of an instrumental analysis in which the multidimensional voice programme (MDVP) and the voice range profile (VRP) were used to measure vocal parameters and then calculate the dysphonia severity index (DSI). The GRBASI scale was used to conduct a perceptual analysis of voice quality. Data were processed using descriptive statistics to determine change in each measured parameter after service delivery. A change of clinical significance was observed in the acoustic and perceptual parameters of voice. Guidelines for SLPs in order to maintain optimal vocal effectiveness were suggested.
Couch, Stephanie; Zieba, Dominique; van der Merwe, Anita
2015-01-01
Background As a professional voice user, it is imperative that a speech-language pathologist's (SLP) vocal effectiveness remain consistent throughout the day. Many factors may contribute to reduced vocal effectiveness, including prolonged voice use, vocally abusive behaviours, poor vocal hygiene and environmental factors. Objectives To determine the effect of service delivery on the perceptual and acoustic features of voice. Method A quasi-experimental., pre-test–post-test research design was used. Participants included third- and final-year speech-language pathology students at the University of Pretoria (South Africa). Voice parameters were evaluated in a pre-test measurement, after which the participants provided two consecutive hours of therapy. A post-test measurement was then completed. Data analysis consisted of an instrumental analysis in which the multidimensional voice programme (MDVP) and the voice range profile (VRP) were used to measure vocal parameters and then calculate the dysphonia severity index (DSI). The GRBASI scale was used to conduct a perceptual analysis of voice quality. Data were processed using descriptive statistics to determine change in each measured parameter after service delivery. Results A change of clinical significance was observed in the acoustic and perceptual parameters of voice. Conclusion Guidelines for SLPs in order to maintain optimal vocal effectiveness were suggested. PMID:26304213
Estimation of brain network ictogenicity predicts outcome from epilepsy surgery
NASA Astrophysics Data System (ADS)
Goodfellow, M.; Rummel, C.; Abela, E.; Richardson, M. P.; Schindler, K.; Terry, J. R.
2016-07-01
Surgery is a valuable option for pharmacologically intractable epilepsy. However, significant post-operative improvements are not always attained. This is due in part to our incomplete understanding of the seizure generating (ictogenic) capabilities of brain networks. Here we introduce an in silico, model-based framework to study the effects of surgery within ictogenic brain networks. We find that factors conventionally determining the region of tissue to resect, such as the location of focal brain lesions or the presence of epileptiform rhythms, do not necessarily predict the best resection strategy. We validate our framework by analysing electrocorticogram (ECoG) recordings from patients who have undergone epilepsy surgery. We find that when post-operative outcome is good, model predictions for optimal strategies align better with the actual surgery undertaken than when post-operative outcome is poor. Crucially, this allows the prediction of optimal surgical strategies and the provision of quantitative prognoses for patients undergoing epilepsy surgery.
Guidance simulation and test support for differential GPS flight experiment
NASA Technical Reports Server (NTRS)
Geier, G. J.; Loomis, P. V. W.; Cabak, A.
1987-01-01
Three separate tasks which supported the test preparation, test operations, and post test analysis of the NASA Ames flight test evaluation of the differential Global Positioning System (GPS) are presented. Task 1 consisted of a navigation filter design, coding, and testing to optimally make use of GPS in a differential mode. The filter can be configured to accept inputs from external censors such as an accelerometer and a barometric or radar altimeter. The filter runs in real time onboard a NASA helicopter. It processes raw pseudo and delta range measurements from a single channel sequential GPS receiver. The Kalman filter software interfaces are described in detail, followed by a description of the filter algorithm, including the basic propagation and measurement update equations. The performance during flight tests is reviewed and discussed. Task 2 describes a refinement performed on the lateral and vertical steering algorithms developed on a previous contract. The refinements include modification of the internal logic to allow more diverse inflight initialization procedures, further data smoothing and compensation for system induced time delays. Task 3 describes the TAU Corp participation in the analysis of the real time Kalman navigation filter. The performance was compared to that of the Z-set filter in flight and to the laser tracker position data during post test analysis. This analysis allowed a more optimum selection of the parameters of the filter.
Optimal Duration for Voice Rest After Vocal Fold Surgery: Randomized Controlled Clinical Study.
Kaneko, Mami; Shiromoto, Osamu; Fujiu-Kurachi, Masako; Kishimoto, Yo; Tateya, Ichiro; Hirano, Shigeru
2017-01-01
Voice rest is commonly recommended after phonomicrosurgery to prevent worsening of vocal fold injuries. However, the most effective duration of voice rest is unknown. Recently, early vocal stimulation was recommended as a means to improve wound healing. The purpose of this study is to examine the optimal duration of voice rest after phonomicrosurgery. Randomized controlled clinical study. Patients undergoing phonomicrosurgery for leukoplakia, carcinoma in situ, vocal fold polyp, Reinke's edema, and cyst were chosen. Participants were randomly assigned to voice rest for 3 or 7 postoperative days. Voice therapy was administered to both groups after voice rest. Grade, roughness, breathiness, asthenia, and strain (GRBAS) scale, stroboscopic examination, aerodynamic assessment, acoustic analysis, and Voice Handicap Index-10 (VHI-10) were performed pre- and postoperatively at 1, 3, and 6 months. Stroboscopic examination evaluated normalized mucosal wave amplitude (NMWA). Parameters were compared between both groups. Thirty-one patients were analyzed (3-day group, n = 16; 7-day group, n = 15). Jitter, shimmer, and VHI-10 were significantly better in the 3-day group at 1 month post operation. GRBAS was significantly better in the 3-day group at 1 and 3 months post operation, and NMWA was significantly better in the 3-day group at 1, 3, and 6 months post operation compared to the 7-day group. The data suggest that 3 days of voice rest followed by voice therapy may lead to better wound healing of the vocal fold compared to 7 days of voice rest. Appropriate mechanical stimulation during early stages of vocal fold wound healing may lead to favorable functional recovery. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.
Assessment of provider attitudes toward #naloxone on Twitter.
Haug, Nancy A; Bielenberg, Jennifer; Linder, Steven H; Lembke, Anna
2016-01-01
As opioid overdose rates continue to pose a major public health crisis, the need for naloxone treatment by emergency first responders is critical. Little is known about the views of those who administer naloxone. The current study examines attitudes of health professionals on the social media platform Twitter to better understand their perceptions of opioid users, the role of naloxone, and potential training needs. Public comments on Twitter regarding naloxone were collected for a period of 3 consecutive months. The occupations of individuals who posted tweets were identified through Twitter profiles or hashtags. Categories of emergency service first responders and medical personnel were created. Qualitative analysis using a grounded theory approach was used to produce thematic content. The relationships between occupation and each theme were analyzed using Pearson chi-square statistics and post hoc analyses. A total of 368 individuals posted 467 naloxone-related tweets. Occupations consisted of professional first responders such as emergency medical technicians (EMTs), firefighters, and paramedics (n = 122); law enforcement officers (n = 70); nurses (n = 62); physicians (n = 48); other health professionals including pharmacists, pharmacy technicians, counselors, and social workers (n = 31); naloxone-trained individuals (n = 12); and students (n = 23). Primary themes included burnout, education and training, information seeking, news updates, optimism, policy and economics, stigma, and treatment. The highest levels of burnout, fatigue, and stigma regarding naloxone and opioid overdose were among nurses, EMTs, other health care providers, and physicians. In contrast, individuals who self-identified as "naloxone-trained" had the highest optimism and the lowest amount of burnout and stigma. Provider training and refinement of naloxone administration procedures are needed to improve treatment outcomes and reduce provider stigma. Social networking sites such as Twitter may have potential for offering psychoeducation to health care providers.
Systematic review: Early versus late dangling after free flap reconstruction of the lower limb.
McGhee, J T; Cooper, L; Orkar, K; Harry, L; Cubison, T
2017-08-01
Dangling regimes after free flap surgery to the lower limb vary between centres and clinicians. There is currently no accepted gold standard. This review examines the evidence for early versus late post-operative dangling after free flap reconstruction of the lower limb. The secondary aim is to evaluate the regimes used. Medline, Embase and the Cochrane library were searched for all studies on dangling or rehabilitation after free flap reconstruction in the lower limb (December 2015). All studies outlining a clear dangling regime were included. Data were extracted by two authors independently and analysed using the software package Review Manager (RevMan 5). All authors were contacted for further information. 197 patients were included from 8 studies: 1 randomized, 6 cohort and 1 case-series. Although some studies did not state the aetiology, of those that did; 42% were trauma, 31% oncology, 20% complex wounds and 7% infection. The majority of flaps were latissimus dorsi, 18% parascapular, 15% anterolateral thigh and the remainder was mixed. Forty-eight percent of patients dangled on post-operative day (POD) 7, 29% on day 6, 4% on day 5 and 18% on day 3, with varying regimes. A meta-analysis of comparable studies showed circulatory benefit after 4 days of dangling using tissue oxygen saturation as a measure. Four flap failures (2.0%) were reported. There is physiological benefit in post-operative dangling. A 3-day flap training regime is sufficient for physiological training. However, the optimal flap training regime remains unclear. It may be appropriate to start dangling as early as POD 3. More research is needed to determine the optimal time to start dangling and the regime. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
Wittwer, Thorsten; Franke, Ulrich F W; Ochs, Matthias; Sandhaus, Tim; Schuette, Alex; Richter, Stefan; Dreyer, Niels; Knudsen, Lars; Müller, Thomas; Schubert, Harald; Richter, Joachim; Wahlers, Thorsten
2005-10-01
Lung transplantation is effective for end-stage pulmonary disease, but its successful application is still limited by organ shortage and sub-optimal preservation techniques. Therefore, optimal allograft protection is essential to reduce organ dysfunction, especially in the early post-operative period. Intravenous prostanoids are routinely used to ameliorate reperfusion injury. However, the latest evidence suggests similar efficacy using inhaled prostacyclin. Thus, we evaluated the impact of donor pre-treatment using the prostacyclin analog, iloprost, on post-ischemic function of Perfadex-protected allografts. In Group 1, 5 pig lungs were preserved with Perfadex (PER group) solution and stored for 27 hours. In Group 2, 100 microg of iloprost was aerosolized over 30 minutes using a novel mobile ultrasonic nebulizer (Optineb) before identical organ harvest (PER-ILO group). After left lung transplantation and contralateral lung exclusion, hemodynamic variables, Po2/Fio2 and dynamic compliance were monitored for 6 hours and compared with sham-operated controls. Pulmonary edema was determined stereologically and by wet-to-dry (W/D) weight ratio. Statistical assessment included analysis of variance (ANOVA) with repeated measures. Dynamic compliance and pulmonary vascular resistance (PVR) were superior in iloprost-treated compared with untreated organs (p < 0.05), whereas oxygenation was comparable between groups. W/D ratio revealed a significantly smaller amount of lung water in PER-ILO organs (p = 0.048), whereas stereologic data showed a trend toward less intra-alveolar edema. Endobronchial application of iloprost in donor lungs before Perfadex preservation decreases post-ischemic edema and significantly improves lung compliance and vascular resistance. This innovative approach is easily applicable in the clinical setting and offers a new strategy for improvement of pulmonary allograft preservation.
Optimizing L2 Curriculum for China Post-Secondary Education
ERIC Educational Resources Information Center
Guadagni, Donald
2015-01-01
This instructional paper examines the lack of L2 English skills demonstrated by Chinese post-secondary education students and the results of empiric testing to determine what key language functions were missing from a student's tool box when exiting their primary education phase.The identification of these skills and ability gaps allowed for…
EUV process establishment through litho and etch for N7 node
NASA Astrophysics Data System (ADS)
Kuwahara, Yuhei; Kawakami, Shinichiro; Kubota, Minoru; Matsunaga, Koichi; Nafus, Kathleen; Foubert, Philippe; Mao, Ming
2016-03-01
Extreme ultraviolet lithography (EUVL) technology is steadily reaching high volume manufacturing for 16nm half pitch node and beyond. However, some challenges, for example scanner availability and resist performance (resolution, CD uniformity (CDU), LWR, etch behavior and so on) are remaining. Advance EUV patterning on the ASML NXE:3300/ CLEAN TRACK LITHIUS Pro Z- EUV litho cluster is launched at imec, allowing for finer pitch patterns for L/S and CH. Tokyo Electron Ltd. and imec are continuously collabo rating to develop manufacturing quality POR processes for NXE:3300. TEL's technologies to enhance CDU, defectivity and LWR/LER can improve patterning performance. The patterning is characterized and optimized in both litho and etch for a more complete understanding of the final patterning performance. This paper reports on post-litho CDU improvement by litho process optimization and also post-etch LWR reduction by litho and etch process optimization.
Cubero Gómez, José M; Acosta Martínez, Juan; Mendias Benítez, Crsitina; Díaz De La Llera, Luis S; Fernández-Quero, Mónica; Guisado Rasco, Agustí; Villa Gil-Ortega, Manuel; Sánchez González, Ángel
2015-12-01
Diabetic patients with an acute coronary syndrome undergoing percutaneous coronary intervention frequently exhibit high platelet reactivity while on clopidogrel. We hypothesized that in diabetic patients undergoing percutaneous coronary intervention, who exhibit high-platelet-reactivity after standard treatment with clopidogrel, a 60-mg prasugrel loading dose is superior to standard treatment with clopidogrel for optimal P2Y12 inhibition within the first 24-36 h post-angioplasty. VERDI was a prospective, randomized, single-centre, single-blind, parallel-design study (NCT01684813). Consecutive diabetic patients with an non-ST-segment elevation acute coronary syndrome undergoing percutaneous coronary intervention and loaded with clopidogrel were considered for platelet reactivity assessment immediately before angioplasty with the VerifyNow assay measured in P2Y12 reaction units (PRU). Fifty of 63 screened patients (79.4%) had high platelet reactivity (PRU ≥ 208) and were randomized to receive a 60-mg prasugrel loading dose (n = 25) versus clopidogrel standard dose (n = 25). Platelet function was assessed again 24 hours post-angioplasty. Prasugrel achieved greater platelet inhibition than clopidogrel 24 hours post-angioplasty (median [interquartile range], 38 [9-72] vs 285 [240-337], respectively; P < 0.001). The non-high-platelet-reactivity rate (PRU < 208) at 24 h post-angioplasty (primary end point) was higher with prasugrel; 25 patients (100%) in the prasugrel group achieved optimal antiaggregation vs 4 patients (16%) in the clopidogrel group (P < 0.001). No significant acute bleeding was documented in either group. Among type 2 diabetic patients suffering an acute coronary syndrome with high-platelet-reactivity undergoing percutaneous coronary intervention, switching from clopidogrel to prasugrel was superior to standard treatment with clopidogrel for the achievement of optimal antiaggregation within the first 24 hours post-angioplasty.
Bioengineered Hydrogel to Inhibit Post-Traumatic Central Nervous System Scarring
2016-10-01
AWARD NUMBER: W81XWH-14-1-0586 TITLE: Bioengineered Hydrogel to Inhibit Post-Traumatic Central Nervous System Scarring PRINCIPAL...Hydrogel to Inhibit Post-Traumatic Central Nervous System Scarring 5a. CONTRACT NUMBER W81XWH-14-1-0586 5b. GRANT NUMBER W81XWH- 14-1-0586 5c...barriers that prevent the optimal delivery of biologics and cells to the injured nervous system . A significant problem is the formation of scar tissue
Practical Considerations for Optimizing Position Sensitivity in Arrays of Position-sensitive TES's
NASA Technical Reports Server (NTRS)
Smith, Stephen J.; Bandler, Simon R.; Figueroa-Feliciano, Encetali; Iyomoto, Naoko; Kelley, Richard L.; Kilbourne, Caroline A.; Porder, Frederick S.; Sadleir, John E.
2007-01-01
We are developing Position-Sensitive Transitions-Edge Sensors (PoST's) for future X-ray astronomy missions such as NASA's Constellation-X. The PoST consists of one or more Transitions Edge Sensors (TES's) thermally connected to a large X-ray absorber, which through heat diffusion, gives rise to position dependence. The development of PoST's is motivated by the desire to achieve the largest the focal-plan coverage with the fewest number of readout channels. In order to develop a practical array, consisting of an inner pixellated core with an outer array of large absorber PoST's, we must be able to simultaneously read out all (-1800) channels in the array. This is achievable using time division multiplexing (TDM), but does set stringent slew rate requirements on the array. Typically, we must damp the pulses to reduce the slew rate of the input signal to the TDM. This is achieved by applying a low-pass analog filter with large inductance to the signal. This attenuates the high frequency components of the signal, essential for position discrimination in PoST's, relative to the white noise of the readout chain and degrades the position sensitivity. Using numerically simulated data, we investigate the position sensing ability of typical PoST designs under such high inductance conditions. We investigate signal-processing techniques for optimal determination of the event position and discuss the practical considerations for real-time implementation.
GCaMP expression in retinal ganglion cells characterized using a low-cost fundus imaging system
NASA Astrophysics Data System (ADS)
Chang, Yao-Chuan; Walston, Steven T.; Chow, Robert H.; Weiland, James D.
2017-10-01
Objective. Virus-transduced, intracellular-calcium indicators are effective reporters of neural activity, offering the advantage of cell-specific labeling. Due to the existence of an optimal time window for the expression of calcium indicators, a suitable tool for tracking GECI expression in vivo following transduction is highly desirable. Approach. We developed a noninvasive imaging approach based on a custom-modified, low-cost fundus viewing system that allowed us to monitor and characterize in vivo bright-field and fluorescence images of the mouse retina. AAV2-CAG-GCaMP6f was injected into a mouse eye. The fundus imaging system was used to measure fluorescence at several time points post injection. At defined time points, we prepared wholemount retina mounted on a transparent multielectrode array and used calcium imaging to evaluate the responsiveness of retinal ganglion cells (RGCs) to external electrical stimulation. Main results. The noninvasive fundus imaging system clearly resolves individual (RGCs and axons. RGC fluorescence intensity and the number of observable fluorescent cells show a similar rising trend from week 1 to week 3 after viral injection, indicating a consistent increase of GCaMP6f expression. Analysis of the in vivo fluorescence intensity trend and in vitro neurophysiological responsiveness shows that the slope of intensity versus days post injection can be used to estimate the optimal time for calcium imaging of RGCs in response to external electrical stimulation. Significance. The proposed fundus imaging system enables high-resolution digital fundus imaging in the mouse eye, based on off-the-shelf components. The long-term tracking experiment with in vitro calcium imaging validation demonstrates the system can serve as a powerful tool monitoring the level of genetically-encoded calcium indicator expression, further determining the optimal time window for following experiment.
Chiastra, Claudio; Wu, Wei; Dickerhoff, Benjamin; Aleiou, Ali; Dubini, Gabriele; Otake, Hiromasa; Migliavacca, Francesco; LaDisa, John F
2016-07-26
The optimal stenting technique for coronary artery bifurcations is still debated. With additional advances computational simulations can soon be used to compare stent designs or strategies based on verified structural and hemodynamics results in order to identify the optimal solution for each individual's anatomy. In this study, patient-specific simulations of stent deployment were performed for 2 cases to replicate the complete procedure conducted by interventional cardiologists. Subsequent computational fluid dynamics (CFD) analyses were conducted to quantify hemodynamic quantities linked to restenosis. Patient-specific pre-operative models of coronary bifurcations were reconstructed from CT angiography and optical coherence tomography (OCT). Plaque location and composition were estimated from OCT and assigned to models, and structural simulations were performed in Abaqus. Artery geometries after virtual stent expansion of Xience Prime or Nobori stents created in SolidWorks were compared to post-operative geometry from OCT and CT before being extracted and used for CFD simulations in SimVascular. Inflow boundary conditions based on body surface area, and downstream vascular resistances and capacitances were applied at branches to mimic physiology. Artery geometries obtained after virtual expansion were in good agreement with those reconstructed from patient images. Quantitative comparison of the distance between reconstructed and post-stent geometries revealed a maximum difference in area of 20.4%. Adverse indices of wall shear stress were more pronounced for thicker Nobori stents in both patients. These findings verify structural analyses of stent expansion, introduce a workflow to combine software packages for solid and fluid mechanics analysis, and underscore important stent design features from prior idealized studies. The proposed approach may ultimately be useful in determining an optimal choice of stent and position for each patient. Copyright © 2015 Elsevier Ltd. All rights reserved.
Underwater gait analysis in Parkinson's disease.
Volpe, Daniele; Pavan, Davide; Morris, Meg; Guiotto, Annamaria; Iansek, Robert; Fortuna, Sofia; Frazzitta, Giuseppe; Sawacha, Zimi
2017-02-01
Although hydrotherapy is one of the physical therapies adopted to optimize gait rehabilitation in people with Parkinson disease, the quantitative measurement of gait-related outcomes has not been provided yet. This work aims to document the gait improvements in a group of parkinsonians after a hydrotherapy program through 2D and 3D underwater and on land gait analysis. Thirty-four parkinsonians and twenty-two controls were enrolled, divided into two different cohorts. In the first one, 2 groups of patients underwent underwater or land based walking training; controls underwent underwater walking training. Hence pre-treatment 2D underwater and on land gait analysis were performed, together with post-treatment on land gait analysis. Considering that current literature documented a reduced movement amplitude in parkinsonians across all lower limb joints in all movement planes, 3D underwater and on land gait analysis were performed on a second cohort of subjects (10 parkinsonians and 10 controls) who underwent underwater gait training. Baseline land 2D and 3D gait analysis in parkinsonians showed shorter stride length and slower speed than controls, in agreement with previous findings. Comparison between underwater and on land gait analysis showed reduction in stride length, cadence and speed on both parkinsonians and controls. Although patients who underwent underwater treatment exhibited significant changes on spatiotemporal parameters and sagittal plane lower limb kinematics, 3D gait analysis documented a significant (p<0.05) improvement in all movement planes. These data deserve attention for research directions promoting the optimal recovery and maintenance of walking ability. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.
Derate Mitigation Options for Pulverized Coal Power Plant Carbon Capture Retrofits
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hoffmann, Jeffrey W.; Hackett, Gregory A.; Lewis, Eric G.
Carbon capture and storage (CCS) technologies available in the near-term for pulverized coal-fueled power plants (i.e., post combustion solvent technologies) require substantial capital investment and result in marked decrease in electricity available for sale to the grid. The impact to overall plant economics can be mitigated for new plant designs (where the entire plant can be optimized around the CCS system). However, existing coal-fueled power plants were designed without the knowledge or intent to retrofit a CCS process, and it is simply not possible to re-engineer an existing plant in a manner that it could achieve the same performance asmore » if it was originally designed and optimized for CCS technology. Pairing an auxiliary steam supply to the capture system is a technically feasible option to mitigate the derate resulting from diverting steam away from an existing steam turbine and continuing to run that turbine at steam flow rates and properties outside of the original design specifications. The results of this analysis strongly support the merits of meeting the steam and power requirements for a retrofitted post-combustion solvent based carbon dioxide (CO2) capture system with an auxiliary combined heat and power (CHP) plant rather than robbing the base plant (i.e., diverting steam from the existing steam cycle and electricity from sale to the grid).« less
Development and application of a microarray meter tool to optimize microarray experiments
Rouse, Richard JD; Field, Katrine; Lapira, Jennifer; Lee, Allen; Wick, Ivan; Eckhardt, Colleen; Bhasker, C Ramana; Soverchia, Laura; Hardiman, Gary
2008-01-01
Background Successful microarray experimentation requires a complex interplay between the slide chemistry, the printing pins, the nucleic acid probes and targets, and the hybridization milieu. Optimization of these parameters and a careful evaluation of emerging slide chemistries are a prerequisite to any large scale array fabrication effort. We have developed a 'microarray meter' tool which assesses the inherent variations associated with microarray measurement prior to embarking on large scale projects. Findings The microarray meter consists of nucleic acid targets (reference and dynamic range control) and probe components. Different plate designs containing identical probe material were formulated to accommodate different robotic and pin designs. We examined the variability in probe quality and quantity (as judged by the amount of DNA printed and remaining post-hybridization) using three robots equipped with capillary printing pins. Discussion The generation of microarray data with minimal variation requires consistent quality control of the (DNA microarray) manufacturing and experimental processes. Spot reproducibility is a measure primarily of the variations associated with printing. The microarray meter assesses array quality by measuring the DNA content for every feature. It provides a post-hybridization analysis of array quality by scoring probe performance using three metrics, a) a measure of variability in the signal intensities, b) a measure of the signal dynamic range and c) a measure of variability of the spot morphologies. PMID:18710498
Improvement of Automated POST Case Success Rate Using Support Vector Machines
NASA Technical Reports Server (NTRS)
Zwack, Mathew R.; Dees, Patrick D.
2017-01-01
During early conceptual design of complex systems, concept down selection can have a large impact upon program life-cycle cost. Therefore, any concepts selected during early design will inherently commit program costs and affect the overall probability of program success. For this reason it is important to consider as large a design space as possible in order to better inform the down selection process. For conceptual design of launch vehicles, trajectory analysis and optimization often presents the largest obstacle to evaluating large trade spaces. This is due to the sensitivity of the trajectory discipline to changes in all other aspects of the vehicle design. Small deltas in the performance of other subsystems can result in relatively large fluctuations in the ascent trajectory because the solution space is non-linear and multi-modal. In order to help capture large design spaces for new launch vehicles, the authors have performed previous work seeking to automate the execution of the industry standard tool, Program to Optimize Simulated Trajectories (POST). This work initially focused on implementation of analyst heuristics to enable closure of cases in an automated fashion, with the goal of applying the concepts of design of experiments (DOE) and surrogate modeling to enable near instantaneous throughput of vehicle cases.3 As noted in [4] work was then completed to improve the DOE process by utilizing a graph theory based approach to connect similar design points.
Løkke, Mette Marie; Seefeldt, Helene Fast; Edwards, Gareth; Green, Ole
2011-01-01
In order to design optimal packages, it is of pivotal importance to determine the rate at which harvested fresh fruits and vegetables consume oxygen. The respiration rate of oxygen (RRO2) is determined by measuring the consumed oxygen per hour per kg plant material, and the rate is highly influenced by temperature and gas composition. Traditionally, RRO2 has been determined at discrete time intervals. In this study, wireless sensor networks (WSNs) were used to determine RRO2 continuously in plant material (fresh cut broccoli florets) at 5 °C, 10 °C and 20 °C and at modified gas compositions (decreasing oxygen and increasing carbon dioxide levels). Furthermore, the WSN enabled concomitant determination of oxygen and temperature in the very close vicinity of the plant material. This information proved a very close relationship between changes in temperature and respiration rate. The applied WSNs were unable to determine oxygen levels lower than 5% and carbon dioxide was not determined. Despite these drawbacks in relation to respiration analysis, the WSNs offer a new possibility to do continuous measurement of RRO2 in post harvest research, thereby investigating the close relation between temperature and RRO2. The conclusions are that WSNs have the potential to be used as a monitor of RRO2 of plant material after harvest, during storage and packaging, thereby leading to optimized consumer products. PMID:22164085
NASA Astrophysics Data System (ADS)
Li, Minmin; Dai, Chao; Wang, Fengzhong; Kong, Zhiqiang; He, Yan; Huang, Ya Tao; Fan, Bei
2017-02-01
An effective analysis method was developed based on a chemometric tool for the simultaneous quantification of five different post-harvest pesticides (2,4-dichlorophenoxyacetic acid (2,4-D), carbendazim, thiabendazole, iprodione, and prochloraz) in fruits and vegetables. In the modified QuEChERS (quick, easy, cheap, effective, rugged and safe) method, the factors and responses for optimization of the extraction and cleanup analyses were compared using the Plackett-Burman (P-B) screening design. Furthermore, the significant factors (toluene percentage, hydrochloric acid (HCl) percentage, and graphitized carbon black (GCB) amount) were optimized using a central composite design (CCD) combined with Derringer’s desirability function (DF). The limits of quantification (LOQs) were estimated to be 1.0 μg/kg for 2,4-D, carbendazim, thiabendazole, and prochloraz, and 1.5 μg/kg for iprodione in food matrices. The mean recoveries were in the range of 70.4-113.9% with relative standard deviations (RSDs) of less than 16.9% at three spiking levels. The measurement uncertainty of the analytical method was determined using the bottom-up approach, which yielded an average value of 7.6%. Carbendazim was most frequently found in real samples analyzed using the developed method. Consequently, the analytical method can serve as an advantageous and rapid tool for determination of five preservative pesticides in fruits and vegetables.
Li, Minmin; Dai, Chao; Wang, Fengzhong; Kong, Zhiqiang; He, Yan; Huang, Ya Tao; Fan, Bei
2017-01-01
An effective analysis method was developed based on a chemometric tool for the simultaneous quantification of five different post-harvest pesticides (2,4-dichlorophenoxyacetic acid (2,4-D), carbendazim, thiabendazole, iprodione, and prochloraz) in fruits and vegetables. In the modified QuEChERS (quick, easy, cheap, effective, rugged and safe) method, the factors and responses for optimization of the extraction and cleanup analyses were compared using the Plackett–Burman (P–B) screening design. Furthermore, the significant factors (toluene percentage, hydrochloric acid (HCl) percentage, and graphitized carbon black (GCB) amount) were optimized using a central composite design (CCD) combined with Derringer’s desirability function (DF). The limits of quantification (LOQs) were estimated to be 1.0 μg/kg for 2,4-D, carbendazim, thiabendazole, and prochloraz, and 1.5 μg/kg for iprodione in food matrices. The mean recoveries were in the range of 70.4–113.9% with relative standard deviations (RSDs) of less than 16.9% at three spiking levels. The measurement uncertainty of the analytical method was determined using the bottom-up approach, which yielded an average value of 7.6%. Carbendazim was most frequently found in real samples analyzed using the developed method. Consequently, the analytical method can serve as an advantageous and rapid tool for determination of five preservative pesticides in fruits and vegetables. PMID:28225030
Li, Minmin; Dai, Chao; Wang, Fengzhong; Kong, Zhiqiang; He, Yan; Huang, Ya Tao; Fan, Bei
2017-02-22
An effective analysis method was developed based on a chemometric tool for the simultaneous quantification of five different post-harvest pesticides (2,4-dichlorophenoxyacetic acid (2,4-D), carbendazim, thiabendazole, iprodione, and prochloraz) in fruits and vegetables. In the modified QuEChERS (quick, easy, cheap, effective, rugged and safe) method, the factors and responses for optimization of the extraction and cleanup analyses were compared using the Plackett-Burman (P-B) screening design. Furthermore, the significant factors (toluene percentage, hydrochloric acid (HCl) percentage, and graphitized carbon black (GCB) amount) were optimized using a central composite design (CCD) combined with Derringer's desirability function (DF). The limits of quantification (LOQs) were estimated to be 1.0 μg/kg for 2,4-D, carbendazim, thiabendazole, and prochloraz, and 1.5 μg/kg for iprodione in food matrices. The mean recoveries were in the range of 70.4-113.9% with relative standard deviations (RSDs) of less than 16.9% at three spiking levels. The measurement uncertainty of the analytical method was determined using the bottom-up approach, which yielded an average value of 7.6%. Carbendazim was most frequently found in real samples analyzed using the developed method. Consequently, the analytical method can serve as an advantageous and rapid tool for determination of five preservative pesticides in fruits and vegetables.
Composite resin reinforcement of flared canals using light-transmitting plastic posts.
Lui, J L
1994-05-01
Composite resins have been advocated as a reinforcing build-up material for badly damaged endodontically treated teeth with flared canals. However, the control of an autocuring composite resin is difficult because it polymerizes rapidly within the root canal. While the light-curing composite resins are more user friendly, their polymerization can be a problem deep in the root canal. Light-transmitting plastic posts allow the transmission of light into the root canal and enable intraradicular composite resin reconstitution and reinforcement of weakened roots. At the same time, the light-transmitting plastic post forms an optimal post canal in the rehabilitated root and can accurately fit a matching retentive final post. These light-transmitting posts are a useful addition to the dental armamentarium.
Barbara, Angela M; Dobbins, Maureen; Haynes, R Brian; Iorio, Alfonso; Lavis, John N; Raina, Parminder; Levinson, Anthony J
2016-05-11
Increasingly, older adults and their informal caregivers are using the Internet to search for health-related information. There is a proliferation of health information online, but the quality of this information varies, often based on exaggerated or dramatic findings, and not easily comprehended by consumers. The McMaster Optimal Aging Portal (Portal) was developed to provide Internet users with high-quality evidence about aging and address some of these current limitations of health information posted online. The Portal includes content for health professionals coming from three best-in-class resources (MacPLUS, Health Evidence, and Health Systems Evidence) and four types of content specifically prepared for the general public (Evidence Summaries, Web Resource Ratings, Blog Posts, and Twitter messages). Our objectives were to share the findings of the usability evaluation of the Portal with particular focus on the content features for the general public and to inform designers of health information websites and online resources for older adults about key usability themes. Data analysis included task performance during usability testing and qualitative content analyses of both the usability sessions and interviews to identify core themes. A total of 37 participants took part in 33 usability testing sessions and 21 focused interviews. Qualitative analysis revealed common themes regarding the Portal's strengths and challenges to usability. The strengths of the website were related to credibility, applicability, browsing function, design, and accessibility. The usability challenges included reluctance to register, process of registering, searching, terminology, and technical features. The study reinforced the importance of including end users during the development of this unique, dynamic, evidence-based health information website. The feedback was applied to iteratively improve website usability. Our findings can be applied by designers of health-related websites.
Rosas, Samuel; Krill, Michael K; Amoo-Achampong, Kelms; Kwon, KiHyun; Nwachukwu, Benedict U; McCormick, Frank
2017-08-01
Clinical examination of the shoulder joint has gained attention as clinicians aim to use an evidence-based examination of the biceps tendon, with the desire for a proper diagnosis while minimizing costly imaging procedures. The purpose of this study is to create a decision tree analysis that enables the development of a clinical algorithm for diagnosing long head of biceps (LHB) pathology. A literature review of Level I and II diagnostic studies was conducted to extract characteristics of clinical tests for LHB pathology through a systematic review of PubMed, Medline, Ovid, and Cochrane Review databases. Tests were combined in series and parallel to determine sensitivities and specificities, and positive and negative likelihood ratios were determined for each combination using a subjective pretest probability. The "gold standard" for diagnosis in all included studies was arthroscopy or arthrotomy. The optimal testing modality was use of the uppercut test combined with the tenderness to palpation of the biceps tendon test. This combination achieved a sensitivity of 88.4% when performed in parallel and a specificity of 93.8% when performed in series. These tests used in combination optimize post-test probability accuracy greater than any single individual test. Performing the uppercut test and biceps groove tenderness to palpation test together has the highest sensitivity and specificity of known physical examinations maneuvers to aid in the diagnosis of LHB pathology compared with diagnostic arthroscopy (practical, evidence-based, comprehensive examination). A decision tree analysis aides in the practical, evidence-based, comprehensive examination diagnostic accuracy post-testing based on the ordinal scale pretest probability. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
Dobbins, Maureen; Haynes, R. Brian; Iorio, Alfonso; Lavis, John N; Raina, Parminder
2016-01-01
Background Increasingly, older adults and their informal caregivers are using the Internet to search for health-related information. There is a proliferation of health information online, but the quality of this information varies, often based on exaggerated or dramatic findings, and not easily comprehended by consumers. The McMaster Optimal Aging Portal (Portal) was developed to provide Internet users with high-quality evidence about aging and address some of these current limitations of health information posted online. The Portal includes content for health professionals coming from three best-in-class resources (MacPLUS, Health Evidence, and Health Systems Evidence) and four types of content specifically prepared for the general public (Evidence Summaries, Web Resource Ratings, Blog Posts, and Twitter messages). Objective Our objectives were to share the findings of the usability evaluation of the Portal with particular focus on the content features for the general public and to inform designers of health information websites and online resources for older adults about key usability themes. Methods Data analysis included task performance during usability testing and qualitative content analyses of both the usability sessions and interviews to identify core themes. Results A total of 37 participants took part in 33 usability testing sessions and 21 focused interviews. Qualitative analysis revealed common themes regarding the Portal’s strengths and challenges to usability. The strengths of the website were related to credibility, applicability, browsing function, design, and accessibility. The usability challenges included reluctance to register, process of registering, searching, terminology, and technical features. Conclusions The study reinforced the importance of including end users during the development of this unique, dynamic, evidence-based health information website. The feedback was applied to iteratively improve website usability. Our findings can be applied by designers of health-related websites. PMID:27170443
Kashuba, Corinna M.; Benson, James D.; Critser, John K.
2014-01-01
In Part I, we documented differences in cryopreservation success measured by membrane integrity in four mouse embryonic stem cell (mESC) lines from different genetic backgrounds (BALB/c, CBA, FVB, and 129R1), and we demonstrated a potential biophysical basis for these differences through a comparative study characterizing the membrane permeability characteristics and osmotic tolerance limits of each cell line. Here we use these values to predict optimal cryoprotectants, cooling rates, warming rates, and plunge temperatures. We subsequently verified these predictions experimentally for their effects on post-thaw recovery. From this study, we determined that a cryopreservation protocol utilizing 1 M propylene glycol, a cooling rate of 1 °C/minute, and plunging into liquid nitrogen at −41 °C, combined with subsequent warming in a 22 °C water bath with agitation, significantly improved post-thaw recovery for three of the four mESC lines, and did not diminish post-thaw recovery for our single exception. It is proposed that this protocol can be successfully applied to most mESC lines beyond those included within this study once the effect of propylene glycol on mESC gene expression, growth characteristics, and germ-line transmission has been determined. Mouse ESC lines with poor survival using current standard cryopreservation protocols or our proposed protocol can be optimized on a case-by-case basis using the method we have outlined over two papers. For our single exception, the CBA cell line, a cooling rate of 5 °C/minute in the presence of 1.0 M dimethyl sulfoxide or 1.0 M propylene glycol, combined with plunge temperature of −80 °C was optimal. PMID:24560712
Celano, Christopher M; Albanese, Ariana M; Millstein, Rachel A; Mastromauro, Carol A; Chung, Wei-Jean; Campbell, Kirsti A; Legler, Sean R; Park, Elyse R; Healy, Brian C; Collins, Linda M; Januzzi, James L; Huffman, Jeff C
2018-04-05
Despite the clear benefits of physical activity and related behaviors on prognosis, most patients suffering an acute coronary syndrome (ACS) remain nonadherent to these behaviors. Deficits in positive psychological constructs (e.g., optimism) are linked to reduced participation in health behaviors, supporting the potential utility of a positive psychology (PP)-based intervention in post-ACS patients. Accordingly, we aimed to identify optimal components of a PP-based intervention to promote post-ACS physical activity. As part of a multiphase optimization strategy, we completed a randomized factorial trial with eight conditions in 128 post-ACS patients to efficiently identify best-performing intervention components. All participants received a PP-based intervention, with conditions varying in duration (presence/absence of booster sessions), intensity (weekly/daily PP exercises), and content (PP alone or combined with motivational interviewing [MI]), allowing three concurrent comparisons within the trial. Study aims included assessments of the overall feasibility, acceptability, and impact of the intervention, along with the primary aim of determining which components were associated with objectively-measured physical activity and self-reported health behavior adherence at 16 weeks, assessed using longitudinal models. The intervention was well-accepted and associated with substantial improvements in behavioral and psychological outcomes. Booster sessions were associated with greater activity to a nearly significant degree (β=8.58, 95% confidence interval= -0.49-17.65, effect size difference=.43; p=.064), MI was associated with overall adherence (β=0.95, 95% confidence interval=0.02-1.87, effect size difference=.39; p=.044), and weekly exercise completion was generally superior to daily. These findings will enable optimization of the PP-based intervention in preparation for a well-powered controlled trial. ClinicalTrials.gov identifier: NCT02754895.
ERIC Educational Resources Information Center
Sullivan, Dennis D.
2016-01-01
This study sought to identify the relationships among elementary teachers instructional practices in mathematics pre- and post-CCLS implementation in relation to technological and pedagogical content knowledge (TPACK), formative assessment, reflective practice, receptivity to change, academic optimism, and instructional leadership across age,…
Optimal detection and control strategies for invasive species management
Shefali V. Mehta; Robert G. Haight; Frances R. Homans; Stephen Polasky; Robert C. Venette
2007-01-01
The increasing economic and environmental losses caused by non-native invasive species amplify the value of identifying and implementing optimal management options to prevent, detect, and control invasive species. Previous literature has focused largely on preventing introductions of invasive species and post-detection control activities; few have addressed the role of...
Kobayashi, Toshiki; Singer, Madeline L.; Orendurff, Michael S.; Gao, Fan; Daly, Wayne K.; Foreman, K. Bo
2015-01-01
Background The adjustment of plantarflexion resistive moment of an articulated ankle-foot orthosis is considered important in patients post stroke, but the evidence is still limited. Therefore, the aim of this study was to investigate the effect of changing the plantarflexion resistive moment of an articulated ankle-foot orthosis on ankle and knee joint angles and moments in patients post stroke. Methods Gait analysis was performed on 10 subjects post stroke under four different plantarflexion resistive moment conditions using a newly designed articulated ankle-foot orthosis. Data were recorded using a Bertec split-belt instrumented treadmill in a 3-dimensional motion analysis laboratory. Findings The ankle and knee sagittal joint angles and moments were significantly affected by the amount of plantarflexion resistive moment of the ankle-foot orthosis. Increasing the plantarflexion resistive moment of the ankle-foot orthosis induced significant decreases both in the peak ankle plantarflexion angle (P<0.01) and the peak knee extension angle (P<0.05). Also, the increase induced significant increases in the internal dorsiflexion moment of the ankle joint (P<0.01) and significantly decreased the internal flexion moment of the knee joint (P<0.01). Interpretation These results suggest an important link between the kinematic/kinetic parameters of the lower-limb joints and the plantarflexion resistive moment of an articulated ankle-foot orthosis. A future study should be performed to clarify their relationship further so that the practitioners may be able to use these parameters as objective data to determine an optimal plantarflexion resistive moment of an articulated ankle-foot orthosis for improved orthotic care in individual patients. PMID:26149007
Peeters, Bart; Geerts, Inge; Van Mullem, Mia; Micalessi, Isabel; Saegeman, Veroniek; Moerman, Jan
2016-05-01
Many hospitals opt for early postnatal discharge of newborns with a potential risk of readmission for neonatal hyperbilirubinemia. Assays/algorithms with the possibility to improve prediction of significant neonatal hyperbilirubinemia are needed to optimize screening protocols and safe discharge of neonates. This study investigated the predictive value of umbilical cord blood (UCB) testing for significant hyperbilirubinemia. Neonatal UCB bilirubin, UCB direct antiglobulin test (DAT), and blood group were determined, as well as the maternal blood group and the red blood cell antibody status. Moreover, in newborns with clinically apparent jaundice after visual assessment, plasma total bilirubin (TB) was measured. Clinical factors positively associated with UCB bilirubin were ABO incompatibility, positive DAT, presence of maternal red cell antibodies, alarming visual assessment and significant hyperbilirubinemia in the first 6 days of life. UCB bilirubin performed clinically well with an area under the receiver-operating characteristic curve (AUC) of 0.82 (95 % CI 0.80-0.84). The combined UCB bilirubin, DAT, and blood group analysis outperformed results of these parameters considered separately to detect significant hyperbilirubinemia and correlated exponentially with hyperbilirubinemia post-test probability. Post-test probabilities for neonatal hyperbilirubinemia can be calculated using exponential functions defined by UCB bilirubin, DAT, and ABO compatibility results. • The diagnostic value of the triad umbilical cord blood bilirubin measurement, direct antiglobulin testing and blood group analysis for neonatal hyperbilirubinemia remains unclear in literature. • Currently no guideline recommends screening for hyperbilirubinemia using umbilical cord blood. What is New: • Post-test probability for hyperbilirubinemia correlated exponentially with umbilical cord blood bilirubin in different risk groups defined by direct antiglobulin test and ABO blood group compatibility results. • Exponential functions can be used to calculate hyperbilirubinemia probability.
Kobayashi, Toshiki; Singer, Madeline L; Orendurff, Michael S; Gao, Fan; Daly, Wayne K; Foreman, K Bo
2015-10-01
The adjustment of plantarflexion resistive moment of an articulated ankle-foot orthosis is considered important in patients post stroke, but the evidence is still limited. Therefore, the aim of this study was to investigate the effect of changing the plantarflexion resistive moment of an articulated ankle-foot orthosis on ankle and knee joint angles and moments in patients post stroke. Gait analysis was performed on 10 subjects post stroke under four different plantarflexion resistive moment conditions using a newly designed articulated ankle-foot orthosis. Data were recorded using a Bertec split-belt instrumented treadmill in a 3-dimensional motion analysis laboratory. The ankle and knee sagittal joint angles and moments were significantly affected by the amount of plantarflexion resistive moment of the ankle-foot orthosis. Increasing the plantarflexion resistive moment of the ankle-foot orthosis induced significant decreases both in the peak ankle plantarflexion angle (P<0.01) and the peak knee extension angle (P<0.05). Also, the increase induced significant increases in the internal dorsiflexion moment of the ankle joint (P<0.01) and significantly decreased the internal flexion moment of the knee joint (P<0.01). These results suggest an important link between the kinematic/kinetic parameters of the lower-limb joints and the plantarflexion resistive moment of an articulated ankle-foot orthosis. A future study should be performed to clarify their relationship further so that the practitioners may be able to use these parameters as objective data to determine an optimal plantarflexion resistive moment of an articulated ankle-foot orthosis for improved orthotic care in individual patients. Copyright © 2015 Elsevier Ltd. All rights reserved.
Chang, Nai-Wen; Lin, Kuan-Chia; Hsu, Wen-Hu; Lee, Shih-Chun; Chan, James Yi-Hsin; Wang, Kwua-Yun
2015-06-01
While studies have documented gender differences by histologic type among lung cancer patients, the effect of these differences on the health-related quality of life (HRQoL) of post-lobectomy lungcancer patients and related factors remain uncertain. This study examines gender-specific HRQoL and related factors in post-lobectomy lung-cancer patients. A cross-sectional study design was applied. A convenience sample of 231 post-lobectomy lungcancer patients was recruited from the thoracic surgery outpatient departments of two teaching hospitals in Taipei, Taiwan from March to December 2012. Patients performed a spirometry test and completed instruments that included a Beck Depression Inventory-II, an Interpersonal Support Evaluation List, and the symptom and function scales of the Quality of Life Questionnaire. Data analysis used descriptive statistics, including mean and standard deviations, frequency, and percentage values. Independent-sample Student's t-tests and multivariate analyses were used for comparative purposes. This study confirmed a significant gender effect on HRQoL and HRQoL-related factors such as marital status, religious affiliation, smoking status, histologic type, symptoms, pulmonary function, depression, and family support. Moreover, multivariate analysis found gender to be a significant determinant of the HRQoL aspects of physical functioning, emotional functioning, and cognitive functioning. Finally, results indicated that factors other than gender were also significant determinants of HRQoL. Gender impacts the HRQoL and related factors of postoperative lung-cancer patients. Therefore, gender should be considered in assessing and addressing the individual care needs of these patients in order to attain optimal treatment outcomes. Copyright © 2014 Elsevier Ltd. All rights reserved.
Multi-Phase US Spread and Habitat Switching of a Post-Columbian Invasive, Sorghum halepense
Barney, Jacob N.; Atwater, Daniel Z.; Pederson, Gary A.; Pederson, Jeffrey F.; Chandler, J. Mike; Cox, T. Stan; Cox, Sheila; Dotray, Peter; Kopec, David; Smith, Steven E.; Schroeder, Jill; Wright, Steven D.; Jiao, Yuannian; Kong, Wenqian; Goff, Valorie; Auckland, Susan; Rainville, Lisa K.; Pierce, Gary J.; Lemke, Cornelia; Compton, Rosana; Phillips, Christine; Kerr, Alexandra; Mettler, Matthew; Paterson, Andrew H.
2016-01-01
Johnsongrass (Sorghum halepense) is a striking example of a post-Columbian founder event. This natural experiment within ecological time-scales provides a unique opportunity for understanding patterns of continent-wide genetic diversity following range expansion. Microsatellite markers were used for population genetic analyses including leaf-optimized Neighbor-Joining tree, pairwise FST, mismatch analysis, principle coordinate analysis, Tajima’s D, Fu’s F and Bayesian clusterings of population structure. Evidence indicates two geographically distant introductions of divergent genotypes, which spread across much of the US in <200 years. Based on geophylogeny, gene flow patterns can be inferred to have involved five phases. Centers of genetic diversity have shifted from two introduction sites separated by ~2000 miles toward the middle of the range, consistent with admixture between genotypes from the respective introductions. Genotyping provides evidence for a ‘habitat switch’ from agricultural to non-agricultural systems and may contribute to both Johnsongrass ubiquity and aggressiveness. Despite lower and more structured diversity at the invasion front, Johnsongrass continues to advance northward into cooler and drier habitats. Association genetic approaches may permit identification of alleles contributing to the habitat switch or other traits important to weed/invasive management and/or crop improvement. PMID:27755565
Ogourtsova, Tatiana; Archambault, Philippe S; Lamontagne, Anouk
2017-11-07
Hemineglect, defined as a failure to attend to the contralesional side of space, is a prevalent and disabling post-stroke deficit. Conventional hemineglect assessments lack sensitivity as they contain mainly non-functional tasks performed in near-extrapersonal space, using static, two-dimensional methods. This is of concern given that hemineglect is a strong predictor for functional deterioration, limited post-stroke recovery, and difficulty in community reintegration. With the emerging field of virtual reality, several virtual tools have been proposed and have reported better sensitivity in neglect-related deficits detection than conventional methods. However, these and future virtual reality-based tools are yet to be implemented in clinical practice. The present study aimed to explore the barriers/facilitators perceived by clinicians in the use of virtual reality for hemineglect assessment; and to identify features of an optimal virtual assessment. A qualitative descriptive process, in the form of focus groups, self-administered questionnaire and individual interviews was used. Two focus groups (n = 11 clinicians) were conducted and experts in the field (n = 3) were individually interviewed. Several barriers and facilitators, including personal, institutional, client suitability, and equipment factors, were identified. Clinicians and experts in the field reported numerous features for the virtual tool optimization. Factors identified through this study lay the foundation for the development of a knowledge translation initiative towards an implementation of a virtual assessment for hemineglect. Addressing the identified barriers/facilitators during implementation and incorporating the optimal features in the design of the virtual assessment could assist and promote its eventual adoption in clinical settings. Implications for rehabilitation A multimodal and active knowledge translation intervention built on the presently identified modifiable factors is suggested to be implemented to support the clinical integration of a virtual reality-based assessment for post-stroke hemineglect. To amplify application and usefulness of a virtual-reality based tool in the assessment of post-stroke hemineglect, optimal features identified in the present study should be incorporated in the design of such technology.
Peploe, C; McErlain-Naylor, S A; Harland, A R; King, M A
2018-06-01
Three-dimensional kinematic data of bat and ball were recorded for 239 individual shots performed by twenty batsmen ranging from club to international standard. The impact location of the ball on the bat face was determined and assessed against the resultant instantaneous post-impact ball speed and measures of post-impact bat torsion and ball direction. Significant negative linear relationships were found between post-impact ball speed and the absolute distance of impact from the midline medio-laterally and sweetspot longitudinally. Significant cubic relationships were found between the distance of impact from the midline of the bat medio-laterally and both a measure of bat torsion and the post-impact ball direction. A "sweet region" on the bat face was identified whereby impacts within 2 cm of the sweetspot in the medio-lateral direction, and 4.5 cm in the longitudinal direction, caused reductions in ball speed of less than 6% from the optimal value, and deviations in ball direction of less than 10° from the intended target. This study provides a greater understanding of the margin for error afforded to batsmen, allowing researchers to assess shot success in more detail, and highlights the importance of players generating consistently central impact locations when hitting for optimal performance.
Tsioptsias, C; Petridis, D; Athanasakis, N; Lemonidis, I; Deligiannis, A; Samaras, P
2015-12-01
Molasses wastewater is a high strength effluent of food industry such as distilleries, sugar and yeast production plants etc. It is characterized by a dark brown color and exhibits a high content in substances of recalcitrant nature such as melanoidins. In this study, electrocoagulation (EC) was studied as a post treatment step for biologically treated molasses wastewater with high nitrogen content obtained from a baker's yeast industry. Iron and copper electrodes were used in various forms; the influence and interaction of current density, molasses wastewater dilution, and reaction time, on COD, color, ammonium and nitrate removal rates and operating cost were studied and optimized through Box Behnken's response surface analysis. Reaction time varied from 0.5 to 4 h, current density varied from 5 to 40 mA/cm(2) and dilution from 0 to 90% (v/v expressed as water concentration). pH, conductivity and temperature measurements were also carried out during each experiment. From preliminary experiments, it was concluded that the application of aeration and sample dilution, considerably influenced the kinetics of the process. The obtained results showed that COD removal varied between 10 and 54%, corresponding to an operation cost ranging from 0.2 to 33 euro/kg COD removed. Significant removal rates were obtained for nitrogen as nitrate and ammonium (i.e. 70% ammonium removal). A linear relation of COD and ammonium to the design parameters was observed, while operation cost and nitrate removal responded in a curvilinear function. A low ratio of electrode surface to treated volume was used, associated to a low investment cost; in addition, iron wastes could be utilized as low cost electrodes i.e. iron fillings from lathes, aiming to a low operation cost due to electrodes replacement. In general, electrocoagulation proved to be an effective and low cost process for biologically treated molasses-wastewater treatment for additional removal of COD and nitrogen content and color reduction. Treated effluent samples with good quality were produced by EC, with COD, NH4-N and NO3-N concentrations of 180, 52 and 2 mg/l respectively. Response surface analysis revealed that optimized conditions could be established under moderate molasses wastewater dilution, (e.g. 45%), at 3.5 h treatment time and 33 mA/cm(2) current density. Copyright © 2015 Elsevier Ltd. All rights reserved.
Kassubek, Jan; Chaudhuri, Kallol Ray; Zesiewicz, Theresa; Surmann, Erwin; Boroojerdi, Babak; Moran, Kimberly; Ghys, Liesbet; Trenkwalder, Claudia
2014-03-06
Pain is a troublesome non-motor symptom of Parkinson's disease (PD). The RECOVER (Randomized Evaluation of the 24-hour Coverage: Efficacy of Rotigotine; Clintrials.gov: NCT00474058) study demonstrated significant improvements in early-morning motor function (UPDRS III) and sleep disturbances (PDSS-2) with rotigotine transdermal system. Improvements were also reported on a Likert pain scale (measuring any type of pain). This post hoc analysis of RECOVER further evaluates the effect of rotigotine on pain, and whether improvements in pain may be attributable to benefits in motor function or sleep disturbance. PD patients with unsatisfactory early-morning motor impairment were randomized to optimal-dose (up to 16 mg/24 h) rotigotine or placebo, maintained for 4 weeks. Pain was assessed in the early-morning using an 11-point Likert pain scale (rated average severity of pain (of any type) over the preceding 12 hours from 0 [no pain] to 10 [worst pain ever experienced]). Post hoc analyses for patients reporting 'any' pain (pain score ≥1) at baseline, and subgroups reporting 'mild' (score 1-3), and 'moderate-to-severe' pain (score ≥4) were performed. Likert pain scale change from baseline in rotigotine-treated patients was further analyzed based on a UPDRS III/PDSS-2 responder analysis (a responder defined as showing a ≥30% reduction in early morning UPDRS III total score or PDSS-2 total score). As post hoc analyses, all p values presented are exploratory. Of 267 patients with Likert pain data (178 rotigotine, 89 placebo), 187 (70%) reported 'any' pain; of these 87 (33%) reported 'mild', and 100 (37%) 'moderate-to-severe' pain. Change from baseline pain scores decreased with rotigotine compared with placebo in patients with 'any' pain (-0.88 [95% CI: -1.56, -0.19], p = 0.013), and in the subgroup with 'moderate-to-severe' pain (-1.38 [-2.44, -0.31], p = 0.012). UPDRS III or PDSS-2 responders showed greater improvement in pain than non-responders. The results from this post hoc analysis of the RECOVER study suggest that pain was improved in patients with PD treated with rotigotine; this may be partly attributable to benefits in motor function and sleep disturbances. Prospective studies are warranted to investigate this potential benefit and the clinical relevance of these findings.
Determining Optimal Post-Stroke Exercise (DOSE)
2018-02-13
Cerebrovascular Accident; Stroke; Cerebral Infarction; Brain Infarction; Brain Ischemia; Cerebrovascular Disorders; Brain Diseases; Central Nervous System Diseases; Nervous System Diseases; Vascular Diseases
Seth, Ashok; Gupta, Sajal; Pratap Singh, Vivudh; Kumar, Vijay
2017-09-01
Final stent dimensions remain an important predictor of restenosis, target vessel revascularisation (TVR) and subacute stent thrombosis (ST), even in the drug-eluting stent (DES) era. Stent balloons are usually semi-compliant and thus even high-pressure inflation may not achieve uniform or optimal stent expansion. Post-dilatation with non-compliant (NC) balloons after stent deployment has been shown to enhance stent expansion and could reduce TVR and ST. Based on supporting evidence and in the absence of large prospective randomised outcome-based trials, post-dilatation with an NC balloon to achieve optimal stent expansion and maximal luminal area is a logical technical recommendation, particularly in complex lesion subsets.
Li, Michelle W.; Martin, R. Scott
2008-01-01
In this paper, we describe the fabrication and evaluation of a multilayer microchip device that can be used to quantitatively measure the amount of catecholamines released from PC 12 cells immobilized within the same device. This approach allows immobilized cells to be stimulated on-chip and, through rapid actuation of integrated microvalves, the products released from the cells are repeatedly injected into the electrophoresis portion of the microchip, where the analytes are separated based upon mass and charge and detected through post-column derivatization and fluorescence detection. Following optimization of the post-column derivatization detection scheme (using naphthalene-2,3-dicarboxaldehyde and 2-β-mercaptoethanol), off-chip cell stimulation experiments were performed to demonstrate the ability of this device to detect dopamine from a population of PC 12 cells. The final 3-dimensional device that integrates an immobilized PC 12 cell reactor with the bilayer continuous flow sampling/electrophoresis microchip was used to continuously monitor the on-chip stimulated release of dopamine from PC 12 cells. Similar dopamine release was seen when stimulating on-chip versus off-chip yet the on-chip immobilization studies could be carried out with 500 times fewer cells in a much reduced volume. While this paper is focused on PC 12 cells and neurotransmitter analysis, the final device is a general analytical tool that is amenable to immobilization of a variety of cell lines and analysis of various released analytes by electrophoretic means. PMID:18810283
The sweet tooth of biopharmaceuticals: importance of recombinant protein glycosylation analysis.
Lingg, Nico; Zhang, Peiqing; Song, Zhiwei; Bardor, Muriel
2012-12-01
Biopharmaceuticals currently represent the fastest growing sector of the pharmaceutical industry, mainly driven by a rapid expansion in the manufacture of recombinant protein-based drugs. Glycosylation is the most prominent post-translational modification occurring on these protein drugs. It constitutes one of the critical quality attributes that requires thorough analysis for optimal efficacy and safety. This review examines the functional importance of glycosylation of recombinant protein drugs, illustrated using three examples of protein biopharmaceuticals: IgG antibodies, erythropoietin and glucocerebrosidase. Current analytical methods are reviewed as solutions for qualitative and quantitative measurements of glycosylation to monitor quality target product profiles of recombinant glycoprotein drugs. Finally, we propose a framework for designing the quality target product profile of recombinant glycoproteins and planning workflow for glycosylation analysis with the selection of available analytical methods and tools. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Kim, Sung R; Chae, Hyun S; Yoon, Mi J; Han, Jung H; Cho, Kwang J; Chung, Sun J
2012-01-30
Supine recumbence has been widely performed to prevent post-lumbar puncture headache (PLPH). However, the optimal duration of supine recumbence is controversial. The aim of the study is to compare the occurrence of PLPH according to the duration of supine recumbence in patients with neurological disorders. A non-equivalent control/experimental pre-/post-test study design was used. Seventy consecutive patients were prospectively enrolled between July 2007 and July 2008. Thirty-five patients underwent supine recumbence for four hours after lumbar puncture (Group 1) and 35 patients underwent supine recumbence for one hour (Group 2). The overall frequency of PLPH was 31.4%. The frequency of PLPH was not significantly different between the Group 1 (28.6%) and Group 2 (34.3%) (P = 0.607). In patients with PLPH, the median severity (P = 0.203) and median onset time of PLPH (P = 0.582) were not significantly different between the two groups. In a logistic regression analysis, the previous history of post-lumbar puncture headache was a significant risk factor for the occurrence of PLPH (OR = 11.250, 95% CI: 1.10-114.369, P = 0.041). Our study suggests that short duration (one hour) of supine recumbence may be as efficient as long duration (four hours) of supine recumbence to prevent PLPH.
Psychological factors are associated with subjective cognitive complaints 2 months post-stroke.
Nijsse, Britta; van Heugten, Caroline M; van Mierlo, Marloes L; Post, Marcel W M; de Kort, Paul L M; Visser-Meily, Johanna M A
2017-01-01
The aim of this study was to investigate which psychological factors are related to post-stroke subjective cognitive complaints, taking into account the influence of demographic and stroke-related characteristics, cognitive deficits and emotional problems. In this cross-sectional study, 350 patients were assessed at 2 months post-stroke, using the Checklist for Cognitive and Emotional consequences following stroke (CLCE-24) to identify cognitive complaints. Psychological factors were: proactive coping, passive coping, self-efficacy, optimism, pessimism, extraversion, and neuroticism. Associations between CLCE-24 cognition score and psychological factors, emotional problems (depressive symptoms and anxiety), cognitive deficits, and demographic and stroke characteristics were examined using Spearman correlations and multiple regression analyses. Results showed that 2 months post-stroke, 270 patients (68.4%) reported at least one cognitive complaint. Age, sex, presence of recurrent stroke(s), comorbidity, cognitive deficits, depressive symptoms, anxiety, and all psychological factors were significantly associated with the CLCE-24 cognition score in bivariate analyses. Multiple regression analysis showed that psychological factors explained 34.7% of the variance of cognitive complaints independently, and 8.5% (p < .001) after taking all other factors into account. Of all psychological factors, proactive coping was independently associated with cognitive complaints (p < .001), showing that more proactive coping related to less cognitive complaints. Because cognitive complaints are common after stroke and are associated with psychological factors, it is important to focus on these factors in rehabilitation programmes.
2012-01-01
Background Supine recumbence has been widely performed to prevent post-lumbar puncture headache (PLPH). However, the optimal duration of supine recumbence is controversial. The aim of the study is to compare the occurrence of PLPH according to the duration of supine recumbence in patients with neurological disorders. Methods A non-equivalent control/experimental pre-/post-test study design was used. Seventy consecutive patients were prospectively enrolled between July 2007 and July 2008. Thirty-five patients underwent supine recumbence for four hours after lumbar puncture (Group 1) and 35 patients underwent supine recumbence for one hour (Group 2). Results The overall frequency of PLPH was 31.4%. The frequency of PLPH was not significantly different between the Group 1 (28.6%) and Group 2 (34.3%) (P = 0.607). In patients with PLPH, the median severity (P = 0.203) and median onset time of PLPH (P = 0.582) were not significantly different between the two groups. In a logistic regression analysis, the previous history of post-lumbar puncture headache was a significant risk factor for the occurrence of PLPH (OR = 11.250, 95% CI: 1.10-114.369, P = 0.041). Conclusions Our study suggests that short duration (one hour) of supine recumbence may be as efficient as long duration (four hours) of supine recumbence to prevent PLPH. PMID:22289169
Particle drag history in a subcritical post-shock flow - data analysis method and uncertainty
NASA Astrophysics Data System (ADS)
Ding, Liuyang; Bordoloi, Ankur; Adrian, Ronald; Prestridge, Kathy; Arizona State University Team; Los Alamos National Laboratory Team
2017-11-01
A novel data analysis method for measuring particle drag in an 8-pulse particle tracking velocimetry-accelerometry (PTVA) experiment is described. We represented the particle drag history, CD(t) , using polynomials up to the third order. An analytical model for continuous particle position history was derived by integrating an equation relating CD(t) with particle velocity and acceleration. The coefficients of CD(t) were then calculated by fitting the position history model to eight measured particle locations in the sense of least squares. A preliminary test with experimental data showed that the new method yielded physically more reasonable particle velocity and acceleration history compared to conventionally adopted polynomial fitting. To fully assess and optimize the performance of the new method, we performed a PTVA simulation by assuming a ground truth of particle motion based on an ensemble of experimental data. The results indicated a significant reduction in the RMS error of CD. We also found that for particle locating noise between 0.1 and 3 pixels, a range encountered in our experiment, the lowest RMS error was achieved by using the quadratic CD(t) model. Furthermore, we will also discuss the optimization of the pulse timing configuration.
Design optimization of aircraft landing gear assembly under dynamic loading
NASA Astrophysics Data System (ADS)
Wong, Jonathan Y. B.
As development cycles and prototyping iterations begin to decrease in the aerospace industry, it is important to develop and improve practical methodologies to meet all design metrics. This research presents an efficient methodology that applies high-fidelity multi-disciplinary design optimization techniques to commercial landing gear assemblies, for weight reduction, cost savings, and structural performance dynamic loading. Specifically, a slave link subassembly was selected as the candidate to explore the feasibility of this methodology. The design optimization process utilized in this research was sectioned into three main stages: setup, optimization, and redesign. The first stage involved the creation and characterization of the models used throughout this research. The slave link assembly was modelled with a simplified landing gear test, replicating the behavior of the physical system. Through extensive review of the literature and collaboration with Safran Landing Systems, dynamic and structural behavior for the system were characterized and defined mathematically. Once defined, the characterized behaviors for the slave link assembly were then used to conduct a Multi-Body Dynamic (MBD) analysis to determine the dynamic and structural response of the system. These responses were then utilized in a topology optimization through the use of the Equivalent Static Load Method (ESLM). The results of the optimization were interpreted and later used to generate improved designs in terms of weight, cost, and structural performance under dynamic loading in stage three. The optimized designs were then validated using the model created for the MBD analysis of the baseline design. The design generation process employed two different approaches for post-processing the topology results produced. The first approach implemented a close replication of the topology results, resulting in a design with an overall peak stress increase of 74%, weight savings of 67%, and no apparent cost savings due to complex features present in the design. The second design approach focused on realizing reciprocating benefits for cost and weight savings. As a result, this design was able to achieve an overall peak stress increase of 6%, weight and cost savings of 36%, and 60%, respectively.
Wang, Fengyou; Zhang, Xiaodan; Wang, Liguo; Jiang, Yuanjian; Wei, Changchun; Xu, Shengzhi; Zhao, Ying
2014-10-07
In this study, hydrogenated amorphous silicon (a-Si:H) thin films are deposited using a radio-frequency plasma-enhanced chemical vapor deposition (RF-PECVD) system. The Si-H configuration of the a-Si:H/c-Si interface is regulated by optimizing the deposition temperature and post-annealing duration to improve the minority carrier lifetime (τeff) of a commercial Czochralski (Cz) silicon wafer. The mechanism of this improvement involves saturation of the microstructural defects with hydrogen evolved within the a-Si:H films due to the transformation from SiH2 into SiH during the annealing process. The post-annealing temperature is controlled to ∼180 °C so that silicon heterojunction solar cells (SHJ) could be prepared without an additional annealing step. To achieve better performance of the SHJ solar cells, we also optimize the thickness of the a-Si:H passivation layer. Finally, complete SHJ solar cells are fabricated using different temperatures for the a-Si:H film deposition to study the influence of the deposition temperature on the solar cell parameters. For the optimized a-Si:H deposition conditions, an efficiency of 18.41% is achieved on a textured Cz silicon wafer.
Optimal technique for maximal forward rotating vaults in men's gymnastics.
Hiley, Michael J; Jackson, Monique I; Yeadon, Maurice R
2015-08-01
In vaulting a gymnast must generate sufficient linear and angular momentum during the approach and table contact to complete the rotational requirements in the post-flight phase. This study investigated the optimization of table touchdown conditions and table contact technique for the maximization of rotation potential for forwards rotating vaults. A planar seven-segment torque-driven computer simulation model of the contact phase in vaulting was evaluated by varying joint torque activation time histories to match three performances of a handspring double somersault vault by an elite gymnast. The closest matching simulation was used as a starting point to maximize post-flight rotation potential (the product of angular momentum and flight time) for a forwards rotating vault. It was found that the maximized rotation potential was sufficient to produce a handspring double piked somersault vault. The corresponding optimal touchdown configuration exhibited hip flexion in contrast to the hyperextended configuration required for maximal height. Increasing touchdown velocity and angular momentum lead to additional post-flight rotation potential. By increasing the horizontal velocity at table touchdown, within limits obtained from recorded performances, the handspring double somersault tucked with one and a half twists, and the handspring triple somersault tucked became theoretically possible. Copyright © 2015 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Mallick, Rajnish; Ganguli, Ranjan; Kumar, Ravi
2017-05-01
The optimized design of a smart post-buckled beam actuator (PBA) is performed in this study. A smart material based piezoceramic stack actuator is used as a prime-mover to drive the buckled beam actuator. Piezoceramic actuators are high force, small displacement devices; they possess high energy density and have high bandwidth. In this study, bench top experiments are conducted to investigate the angular tip deflections due to the PBA. A new design of a linear-to-linear motion amplification device (LX-4) is developed to circumvent the small displacement handicap of piezoceramic stack actuators. LX-4 enhances the piezoceramic actuator mechanical leverage by a factor of four. The PBA model is based on dynamic elastic stability and is analyzed using the Mathieu-Hill equation. A formal optimization is carried out using a newly developed meta-heuristic nature inspired algorithm, named as the bat algorithm (BA). The BA utilizes the echolocation capability of bats. An optimized PBA in conjunction with LX-4 generates end rotations of the order of 15° at the output end. The optimized PBA design incurs less weight and induces large end rotations, which will be useful in development of various mechanical and aerospace devices, such as helicopter trailing edge flaps, micro and nano aerial vehicles and other robotic systems.
Guidelines 13 and 14—Prediction uncertainty
Hill, Mary C.; Tiedeman, Claire
2005-01-01
An advantage of using optimization for model development and calibration is that optimization provides methods for evaluating and quantifying prediction uncertainty. Both deterministic and statistical methods can be used. Guideline 13 discusses using regression and post-audits, which we classify as deterministic methods. Guideline 14 discusses inferential statistics and Monte Carlo methods, which we classify as statistical methods.
Breast and Prostate Cancer Survivor Responses to Group Exercise and Supportive Group Psychotherapy.
Martin, Eric; Bulsara, Caroline; Battaglini, Claudio; Hands, Beth; Naumann, Fiona L
2015-01-01
This study qualitatively examined an 8-week group exercise and counseling intervention for breast and prostate cancer survivors. Groups exercised 3 days per week, 50 minutes per session, performing moderate-intensity aerobic and resistance training. Groups also underwent 90-minute supportive group psychotherapy sessions once per week. Survivors discussed their experiences in focus groups post intervention. Transcripts were analyzed using interpretative phenomenological analysis. Survivors described how exercise facilitated counseling by creating mutual aid and trust, and counseling helped participants with self-identity, sexuality, and the return to normalcy. When possible, counselors and fitness professionals should create partnerships to optimally support cancer survivors.
2015-09-30
Wireless Networks (WUWNet’14), Rome, Italy, Nov. 12 14, 2014. J. Preisig, “ Underwater Acoustic Communications: Enabling the Next Generation at the...on Wireless Communication. M. Pajovic, J. Preisig, “Performance Analytics and Optimal Design of Multichannel Equalizers for Underwater Acoustic Communications”, to appear in IEEE Journal of Oceanic Engineering. 6 ...Exploiting Structured Dependencies in the Design of Adaptive Algorithms for Underwater Communication Award #3
Roca, M; Leon, N; Pastor, A; Yusà, V
2014-12-29
In this study we propose an analytical strategy that combines a target approach for the quantitative analysis of contemporary pesticide metabolites with a comprehensive post-target screening for the identification of biomarkers of exposure to environmental contaminants in urine using liquid chromatography coupled to high-resolution mass spectrometry (LC–HRMS). The quantitative method for the target analysis of 29 urinary metabolites of organophosphate (OP) insecticides, synthetic pyrethroids, herbicides and fungicides was validated after a previous statistical optimization of the main factors governing the ion source ionization and a fragmentation study using the high energy collision dissociation (HCD) cell. The full scan accurate mass data were acquired with a resolving power of 50,000 FWHM (scan speed, 2 Hz), in both ESI+ and ESI− modes, and with and without HCD-fragmentation. The method – LOQ was lower than 3.2 μg L−1 for the majority of the analytes. For post-target screening a customized theoretical database was built, for the identification of 60 metabolites including pesticides, PAHs, phenols, and other metabolites of environmental pollutants. For identification purposes, accurate exact mass with less than 5 ppm, and diagnostic ions including isotopes and/or fragments were used. The analytical strategy was applied to 20 urine sample collected from children living in Valencia Region. Eleven target metabolites were detected with concentrations ranging from 1.18 to 131 μg L−1. Likewise, several compounds were tentatively identified in the post-target analysis belonging to the families of phthalates, phenols and parabenes. The proposed strategy is suitable for the determination of target pesticide biomarkers in urine in the framework of biomonitoring studies, and appropriate for the identification of other non-target metabolites.
Material Distribution Optimization for the Shell Aircraft Composite Structure
NASA Astrophysics Data System (ADS)
Shevtsov, S.; Zhilyaev, I.; Oganesyan, P.; Axenov, V.
2016-09-01
One of the main goal in aircraft structures designing isweight decreasing and stiffness increasing. Composite structures recently became popular in aircraft because of their mechanical properties and wide range of optimization possibilities.Weight distribution and lay-up are keys to creating lightweight stiff strictures. In this paperwe discuss optimization of specific structure that undergoes the non-uniform air pressure at the different flight conditions and reduce a level of noise caused by the airflowinduced vibrations at the constrained weight of the part. Initial model was created with CAD tool Siemens NX, finite element analysis and post processing were performed with COMSOL Multiphysicsr and MATLABr. Numerical solutions of the Reynolds averaged Navier-Stokes (RANS) equations supplemented by k-w turbulence model provide the spatial distributions of air pressure applied to the shell surface. At the formulation of optimization problem the global strain energy calculated within the optimized shell was assumed as the objective. Wall thickness has been changed using parametric approach by an initiation of auxiliary sphere with varied radius and coordinates of the center, which were the design variables. To avoid a local stress concentration, wall thickness increment was defined as smooth function on the shell surface dependent of auxiliary sphere position and size. Our study consists of multiple steps: CAD/CAE transformation of the model, determining wind pressure for different flow angles, optimizing wall thickness distribution for specific flow angles, designing a lay-up for optimal material distribution. The studied structure was improved in terms of maximum and average strain energy at the constrained expense ofweight growth. Developed methods and tools can be applied to wide range of shell-like structures made of multilayered quasi-isotropic laminates.
Feltus, A; Hentz, N G; Daunert, S
2001-05-25
A class-selective post-capillary reaction detection method for capillary electrophoresis is described in which a streptavidin-fluorescein isothiocyanate (streptavidin-FITC) conjugate is used to detect biotin moieties. The selective binding of biotin moieties to the streptavidin-FITC conjugate causes an enhancement of fluorescence proportional to the concentration of biotin present. After capillary electrophoresis the separated analytes react with streptavidin-FITC in a coaxial reactor and are then detected either by a benchtop spectrofluorometer (2.5 microM detection limit) or by an epi-fluorescence microscope (1 x 10(-7) M detection limit). The method is used to examine biotinylated species in a crude mammalian cell lysate which was found to contain 83+/-3 fmol in 3600 cell volumes. In addition, it is used to examine the uptake of biotin by individual sea urchin oocytes. The results indicate that, in the oocytes, biocytin is the prevalent form of biotin and its concentration varies widely between cells (mean=2+/-2 microM).
Culturing immobilized plant cells for the TUBUL space experiments on the DELTA and 12S Missions
NASA Astrophysics Data System (ADS)
Sieberer, Björn J.; Emons, Anne Mie C.; Vos, Jan W.
2007-09-01
For the TUBUL experiments during the DELTA mission in April 2004 and 12S mission in March/April 2006 on board the Soyuz capsule and the International Space Station we developed a method to culture and chemically fix plant suspension culture cells. The aim of the ten day experiment was to investigate the effect of microgravity on single plant cells. Fully automated experiment cassettes (Plunger Box Units) were developed by Centre for Concepts in Mechatronics (Nuenen, the Netherlands). Tobacco BY- 2 cells were immobilized in a semi- solid agarose matrix that was reinforced by a nylon mesh. This assembly allowed liquid medium refreshment, oxygen supply and chemical fixation, including a post- fixative wash. The method was optimized for post- flight analysis of cell structure, shape and size, cell division, and the microtubule cytoskeleton. The viability of cells in the agarose matrix was similar to cells grown in liquid medium under laboratory conditions, only the stationary growth phase was reached six days later.
Consistency of Post-Newtonian Waveforms with Numerical Relativity
NASA Technical Reports Server (NTRS)
Baker, John G.; vanMeter, James R.; McWilliams, Sean T.; Centrella, Joan; Kelly, Bernard J.
2007-01-01
General relativity predicts the gravitational radiation signatures of mergers of compact binaries,such as coalescing binary black hole systems. Derivations of waveform predictions for such systems are required for optimal scientific analysis of observational gravitational wave data, and have so far been achieved primarily with the aid of the post-Newtonian (PN) approximation. The quaIity of this treatment is unclear, however, for the important late inspiral portion. We derive late-inspiral wave forms via a complementary approach, direct numerical simulation of Einstein's equations, which has recently matured sufficiently for such applications. We compare waveform phasing from simulations covering the last approximately 14 cycles of gravitational radiation from an equal-mass binary system of nonspinning black holes with corresponding 3PN and 3.5PN waveforms. We find phasing agreement consistent with internal error estimates based in either approach, at the level of one radian over approximately 10 cycles. The result suggests that PN waveforms for this system are effective roughly until the system reaches its last stable orbit just prior to the final merger.
Manufacturing heterosexuality: hormone replacement therapy and menopause in urban Oaxaca.
Ramirez, Michelle
2006-01-01
For several decades, hormone replacement therapies have been prescribed to women, not only to prevent disease but to improve the sexual functioning of menopausal women. The medical promotion of continued sexual activity in a woman's post-reproductive years is exported to locations outside of North America and Europe, which provides an opportunity to critically examine the cultural roots that have informed expert biomedical representations. This ethnographic study examined menopause and social class in Oaxaca de Juarez, Mexico using interviews, questionnaires, and textual analysis. The research found that biomedicine in conjunction with the pharmaceutical industry promoted culturally constructed gender hierarchies under the guise of optimal menopausal health. However, women's actual experience of gender and sexuality in mid-life diverged significantly from these expert representations. Themes that emerged in interviews and questionnaires included the importance of motherhood in old age, diminished sexual desire as not problematic, and greater sexual freedom at a post-reproductive age. Ultimately, biomedical discourse was not the sole arbiter of appropriate menopausal womanhood and femininity.
Consistency of Post-Newtonian Waveforms with Numerical Relativity
NASA Technical Reports Server (NTRS)
Baker, John G.; vanMeter, James R.; McWilliams, Sean T.; Cewntrella, Joan; Kelly, Bernard J.
2006-01-01
General relativity predicts the gravitational radiation signatures of mergers of compact binaries, such as coalescing binary black hole systems. Derivations of waveform predictions for such systems are required for optimal scientific analysis of observational gravitational wave data, and have so far been achieved primarily with the aid of the post-Newtonian (PN) approximation. The quality of this treatment is unclear, however, for the important late inspiral portion. We derive late-inspiral waveforms via a complementary approach, direct numerical simulation of Einstein's equations, which has recently matured sufficiently for such applications. We compare waveform phasing from simulations covering the last approximately 14 cycles of gravitational radiation from an equal-mass binary system of nonspinning black holes with the corresponding 3PN and 3.5PN orbital phasing. We find agreement consistent with internal error estimates based on either approach at the level of one radian over approximately 10 cycles. The result suggests that PN waveforms for this system are effective roughly until the system reaches its last stable orbit just prior to the final merger/
Bouma, Wobbe; Wijdh-den Hamer, Inez J; Koene, Bart M; Kuijpers, Michiel; Natour, Ehsan; Erasmus, Michiel E; van der Horst, Iwan C C; Gorman, Joseph H; Gorman, Robert C; Mariani, Massimo A
2014-10-18
Papillary muscle rupture (PMR) is a rare, but often life-threatening mechanical complication of myocardial infarction (MI). Immediate surgical intervention is considered the optimal and most rational treatment for acute PMR, but carries high risks. At this point it is not entirely clear which patients are at highest risk. In this study we sought to determine in-hospital mortality and its predictors for patients who underwent mitral valve surgery for post-MI PMR. Between January 1990 and December 2012, 48 consecutive patients (mean age 64.9 ± 10.8 years) underwent mitral valve repair (n = 10) or replacement (n = 38) for post-MI PMR. Clinical data, echocardiographic data, catheterization data, and surgical reports were reviewed. Univariate and multivariate logistic regression analyses were performed to identify predictors of in-hospital mortality. Intraoperative mortality was 4.2% and in-hospital mortality was 25.0%. Univariate and multivariate logistic regression analyses revealed the logistic EuroSCORE and EuroSCORE II as independent predictors of in-hospital mortality. Receiver operating characteristics curves showed an optimal cutoff value of 40% for the logistic EuroSCORE (area under the curve 0.85, 95% CI 0.71-1.00, P < 0.001) and of 25% for the EuroSCORE II (area under the curve 0.83, 95% CI 0.68-0.99, P = 0.001). After removal of the EuroSCOREs from the model, complete PMR and intraoperative intra-aortic balloon pump (IABP) requirement were independent predictors of in-hospital mortality. The logistic EuroSCORE (optimal cutoff ≥ 40%), EuroSCORE II (optimal cutoff ≥ 25%), complete PMR, and intraoperative IABP requirement are strong independent predictors of in-hospital mortality in patients undergoing mitral valve surgery for post-MI PMR. These predictors may aid in surgical decision making and they may help improve the quality of informed consent.
Chouillard, Elie; Chahine, Elias; Schoucair, Naim; Younan, Antoine; Jarallah, Mohammad Al; Fajardy, Alain; Vitte, René-Louis; Biagini, Jean
2014-06-01
Sleeve gastrectomy (SG) is currently the most common bariatric procedure in France. It achieves both adequate excess weight loss and significant reduction of comorbidities. However, leak is still the most common complication after SG. Nevertheless, its risk of occurrence is <3% in specialized centers. Its management is difficult, long, and challenging. Although the procedure is commonly endoscopic and nonoperative, the management of post-SG fistulas could sometimes be surgical, including peritoneal lavage, abscess drainage, disrupted staple line suturing, resleeve, gastric bypass, or total gastrectomy. Roux-en-Y fistulojejunostomy (RYFJ) has been described as a salvage option. In this study, we report the early results of RYFJ for post-SG fistula, emphasizing indications, operative technique, and short-term outcome. Between January 2007 and December 2012, we treated 62 patients with post-SG fistula. Before surgery, intra-abdominal or thoracic abscesses or collections were either excluded or treated by computed tomographic scan-guided drainage or even surgery. Endoscopic stenting was then attempted. After optimization of the nutritional status in case of failure of endoscopic measures, some of the patients underwent RYFJ. Between January 2007 and December 2012, a total of 21 patients (16 women and 5 men) had RYFJ for post-SG fistula. Mean age was 47 years (range, 22-59 years). Procedures were performed laparoscopically in all but 3 cases. The rate of secondary conversion to laparotomy was 11.1%. The was no mortality. The postoperative morbidity rate was less than 5%. The rate of fistula control was eventually 100%. RYFJ is a safe and feasible salvage procedure for the treatment of patients with post-SG fistula. Longer outcome analysis is, however, needed especially regarding the physiological and metabolic behavior of the procedure.
Schiavo, L; Scalera, G; Pilone, V; De Sena, G; Ciorra, F R; Barbarisi, A
2017-02-01
One of the most effective surgeries for sustainable weight loss in morbidly obese patients is laparoscopic sleeve gastrectomy (LSG). The present study aimed to assess the adherence of LSG patients with respect to following post-operative dietary requirements and micronutrient supplementation, as well as to investigate their perceived barriers in achieving optimal adherence. Retrospective data analysis was performed (3, 6, 9 and 12 months after LSG) using the medical records of 96 morbidly obese patients who had undergone LSG at our institution during 2011-2013. Data collected from patient records were: adherence to prescribed diet; adherence to prescribed consumption of fruit, vegetables, legumes and cereals; use of prescribed micronutrient supplements; and barriers to diet and micronutrient therapy adherence. Data were analysed using spss, version 14.0 (SPSS Inc., Chicago, IL, USA). At 3, 6, 9 and 12 months post-LSG, the rates of patient non-adherence to a prescribed diet were 39%, 45%, 51% and 74%, respectively. In particular, there was a low consumption of fruit, vegetables, legumes and cereals compared to the post-surgery prescription. In addition, the rates of patient non-adherence to prescribed micronutrient supplements at 3, 6, 9 and 12 months post-LSG were 43%, 51%, 59% and 67%, respectively. The main reasons for patient non-adherence to diet were poor self-discipline (72%) and poor family support (11%) whereas difficulty swallowing pills or capsules (61%) and cost (20%) were reported as the main barriers to post-LSG adherence. Morbidly obese patients who have undergone LSG do not follow exactly the post-operative dietary guidelines, including micronutrient therapy. © 2016 The British Dietetic Association Ltd.
Kim, Jung-Sun; Ha, Jinyong; Kim, Byeong-Keuk; Shin, Dong-Ho; Ko, Young-Guk; Choi, Donghoon; Jang, Yangsoo; Hong, Myeong-Ki
2014-06-01
This study sought to evaluate the relationship between post-stent strut apposition and follow-up strut coverage using contour plot optical coherence tomographic analysis. Tracking the fate of interested regions of struts at different time points has not been investigated. Post-intervention and 6-month follow-up optical coherence tomographic evaluations were performed in 82 patients treated with biolimus- (n = 37) or sirolimus-eluting stents (n = 45). Post-stent apposition was classified as embedded, apposed, or malapposed. For volumetric stent evaluation, the post-intervention strut-artery distance and the neointimal thickness at follow-up were measured as a function of the circumferential arc length and longitudinal stent length. Computer-generated contour plots of the strut-artery distance and neointimal thickness were compared. The percentages of embedded and malapposed struts after intervention were 1.8% (Interquartile range [IQR]: 0.6% to 6.2%) and 2.3% (IQR: 0.5% to 5.2%), respectively. The percentages of uncovered and malapposed struts at 6 months were 16.0% (IQR: 7.4% to 33.3%) and 0% (IQR: 0% to 0.7%), respectively. The percentage of uncovered struts at 6 months varied significantly with post-stent strut apposition (0% [IQR: 0% to 11.4%] in embedded, 16.3% [IQR: 8.1% to 31.3%] in apposed, and 26.8% [IQR: 0% to 56.3%] in malapposed, p < 0.001 for all pairwise comparisons). In lesions without tissue prolapse, embedded struts were all covered (100% covered struts) compared with those with tissue prolapse (76.8% covered, p < 0.001). The optical coherence tomography-guided optimization of stent strut apposition enhances strut coverage at follow-up. This comprehensive method for evaluating strut apposition may provide more useful information to understanding the serial changes in strut coverage. (Neointimal Coverage After Implantation of Biolimus Eluting Stent With Biodegradable Polymer: Optical Coherence Tomographic Assessment According to the Treatment of Dyslipidemia and Hypertension and the Types of Implanted Drug-Eluting Stents; NCT01502904). Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.
Wlodarczyk, Dorota
2017-03-01
This study explored the effects intervening in the linkages of optimism and hope with subjective health in the short term after myocardial infarction. A two-wave study design was used. The sample consisted of 222 myocardial infarction survivors. When adopting a cross-sectional design, optimism and hope predicted subjective health at Time 1 and Time 2. After controlling for baseline subjective health, they were no longer significant predictors of subjective health at Time 2. Parallel indirect effects of seeking social support and problem solving were significant for both optimism and hope. After controlling for the shared variance between optimism and hope, these effects remained significant only for optimism.
Kondoh, Eiji; Konishi, Mitsunaga; Kariya, Yoshitaka; Konishi, Ikuo
2015-01-01
Identification of precise bleeding sites is generally important to control hemorrhage. Nevertheless, the optimal technique to detect the bleeding sites has not yet been fully defined for patients with life-threatening post partum hemorrhage. We describe that ultrasonographic visualization of bleeding sites can help control post partum hemorrhage using intrauterine balloon tamponade. © 2014 Wiley Periodicals, Inc.
Early prediction of oral calcium and vitamin D requirements in post-thyroidectomy hypocalcaemia.
Al-Dhahri, Saleh F; Mubasher, Mohamed; Al-Muhawas, Fida; Alessa, Mohammed; Terkawi, Rayan S; Terkawi, Abdullah S
2014-09-01
To optimize and individualize post-thyroidectomy hypocalcemia management. A multicenter prospective cohort study. Two tertiary care hospitals. parathyroid hormone (PTH) was measured preoperatively, then at 1 and 6 hours after surgery. The required doses of calcium and vitamin D were defined as those maintaining the patients asymptomatic and their cCa ≥ 2 mmol/L. They were used as an endpoint in a generalized linear mixed effect model (GLIMMEX) aiming to identify the best predictors of these optimal required doses. Models were evaluated by goodness of fit and Receiver Operating Characteristic (ROC) curves. One hundred and sixty-eight patients were analyzed; 85.1% were female, 49.3% had BMI > 30, and 64% had vitamin D deficiency. Post-thyroidectomy hypocalcemia was found in 25.6%, of whom 18 (41.9%) were symptomatic and received intravenous calcium. First hour percentage of drop in PTH correlated positively with the severity of hypocalcemia (P < .0001). The GLIMMIX prediction model for oral calcium requirement was based on first-hour percentage change from preoperative PTH level, preoperative actual PTH, BMI, and thyroid function. The same predictors were identified for vitamin D, except that thyroid function was replaced with vitamin D status. These factors were used to build predictive equations for calcium and vitamin D doses. Our findings help to optimize management of post-thyroidectomy hypocalcemia by assisting in the early identification of those who are not at risk of hypocalcaemia and by guiding early effective management of those at risk. This may reduce complications and medical cost. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2014.
LDSD POST2 Modeling Enhancements in Support of SFDT-2 Flight Operations
NASA Technical Reports Server (NTRS)
White, Joseph; Bowes, Angela L.; Dutta, Soumyo; Ivanov, Mark C.; Queen, Eric M.
2016-01-01
Program to Optimize Simulated Trajectories II (POST2) was utilized to develop trajectory simulations characterizing all flight phases from drop to splashdown for the Low-Density Supersonic Decelerator (LDSD) project's first and second Supersonic Flight Dynamics Tests (SFDT-1 and SFDT-2) which took place June 28, 2014 and June 8, 2015, respectively. This paper describes the modeling improvements incorporated into the LDSD POST2 simulations since SFDT-1 and presents how these modeling updates affected the predicted SFDT-2 performance and sensitivity to the mission design. The POST2 simulation flight dynamics support during the SFDT-2 launch, operations, and recovery is also provided.
NASA Astrophysics Data System (ADS)
Wang, Mingming; Luo, Jianjun; Yuan, Jianping; Walter, Ulrich
2017-12-01
The objective of this paper is to establish a detumbling strategy and a coordination control scheme for a kinematically redundant space manipulator post-grasping a rotational satellite. First, the dynamics of the kinematically redundant space robot after grasping the target is presented, which lays the foundation for the coordination controller design. Subsequently, optimal detumbling and motion planning strategy for the post-capture phase is proposed based on the quartic Bézier curves and adaptive differential evolution (DE) algorithm subject to the specific constraints. Both detumbling time and control torques are taken into account for the generation of the optimal detumbling strategy. Furthermore, a coordination control scheme is presented to track the designed reference path while regulating the attitude of the chaser to a desired value, which successfully dumps the initial angular velocity of the rotational satellite and controls the base attitude synchronously. Simulation results are presented for detumbling a target with rotational motion using a 7 degree-of-freedom (DOF) redundant space manipulator, which demonstrates the effectiveness of the proposed method.
Nutrition in peri-operative esophageal cancer management.
Steenhagen, Elles; van Vulpen, Jonna K; van Hillegersberg, Richard; May, Anne M; Siersema, Peter D
2017-07-01
Nutritional status and dietary intake are increasingly recognized as essential areas in esophageal cancer management. Nutritional management of esophageal cancer is a continuously evolving field and comprises an interesting area for scientific research. Areas covered: This review encompasses the current literature on nutrition in the pre-operative, peri-operative, and post-operative phases of esophageal cancer. Both established interventions and potential novel targets for nutritional management are discussed. Expert commentary: To ensure an optimal pre-operative status and to reduce peri-operative complications, it is key to assess nutritional status in all pre-operative esophageal cancer patients and to apply nutritional interventions accordingly. Since esophagectomy results in a permanent anatomical change, a special focus on nutritional strategies is needed in the post-operative phase, including early initiation of enteral feeding, nutritional interventions for post-operative complications, and attention to long-term nutritional intake and status. Nutritional aspects of pre-optimization and peri-operative management should be incorporated in novel Enhanced Recovery After Surgery programs for esophageal cancer.
Maximising functional recovery following hip fracture in frail seniors.
Beaupre, Lauren A; Binder, Ellen F; Cameron, Ian D; Jones, C Allyson; Orwig, Denise; Sherrington, Cathie; Magaziner, Jay
2013-12-01
This review discusses factors affecting recovery following hip fracture in frail older people as well as interventions associated with improved functional recovery. Prefracture function, cognitive status, co-morbidities, depression, nutrition and social support impact recovery and may interact to affect post-fracture outcome. There is mounting evidence that exercise is beneficial following hip fracture with higher-intensity/duration programmes showing more promising outcomes. Pharmacologic management for osteoporosis has benefits in preventing further fractures, and interest is growing in pharmacologic treatments for post-fracture loss of muscle mass and strength. A growing body of evidence suggests that sub-populations - those with cognitive impairment, residing in nursing homes or males - also benefit from rehabilitation after hip fracture. Optimal post-fracture care may entail the use of multiple interventions; however, more work is needed to determine optimal exercise components, duration and intensity as well as exploring the impact of multimodal interventions that combine exercise, pharmacology, nutrition and other interventions. Copyright © 2014 Elsevier Ltd. All rights reserved.
Maximising functional recovery following hip fracture in frail seniors
Beaupre, Lauren A.; Binder, Ellen F.; Cameron, Ian D.; Jones, C. Allyson; Orwig, Denise; Sherrington, Cathie; Magaziner, Jay
2015-01-01
This review discusses factors affecting recovery following hip fracture in frail older people as well as interventions associated with improved functional recovery. Prefracture function, cognitive status, co-morbidities, depression, nutrition and social support impact recovery and may interact to affect post-fracture outcome. There is mounting evidence that exercise is beneficial following hip fracture with higher-intensity/duration programmes showing more promising outcomes. Pharmacologic management for osteoporosis has benefits in preventing further fractures, and interest is growing in pharmacologic treatments for post-fracture loss of muscle mass and strength. A growing body of evidence suggests that sub-populations – those with cognitive impairment, residing in nursing homes or males – also benefit from rehabilitation after hip fracture. Optimal post-fracture care may entail the use of multiple interventions; however, more work is needed to determine optimal exercise components, duration and intensity as well as exploring the impact of multimodal interventions that combine exercise, pharmacology, nutrition and other interventions. PMID:24836335
LDSD POST2 Simulation and SFDT-1 Pre-Flight Launch Operations Analyses
NASA Technical Reports Server (NTRS)
Bowes, Angela L.; Davis, Jody L.; Dutta, Soumyo; Striepe, Scott A.; Ivanov, Mark C.; Powell, Richard W.; White, Joseph
2015-01-01
The Low-Density Supersonic Decelerator (LDSD) Project's first Supersonic Flight Dynamics Test (SFDT-1) occurred June 28, 2014. Program to Optimize Simulated Trajectories II (POST2) was utilized to develop trajectory simulations characterizing all SFDT-1 flight phases from drop to splashdown. These POST2 simulations were used to validate the targeting parameters developed for SFDT- 1, predict performance and understand the sensitivity of the vehicle and nominal mission designs, and to support flight test operations with trajectory performance and splashdown location predictions for vehicle recovery. This paper provides an overview of the POST2 simulations developed for LDSD and presents the POST2 simulation flight dynamics support during the SFDT-1 launch, operations, and recovery.
Development of an Optimal Diaphragmatic Hernia Rabbit Model for Pediatric Thoracoscopic Training
Pérez-Merino, Eva M.; Usón-Casaús, Jesús M.; Zaragoza-Bayle, Concepción; Rivera-Barreno, Ramón; Rodríguez-Alarcón, Carlos A.; Palme, Rupert; Sánchez-Margallo, Francisco M.
2014-01-01
Our objectives were to standarize the procedure needed to reproduce a similar surgical scene which a pediatric surgeon would face on repairing a Bochdalek hernia in newborns and to define the optimal time period for hernia development that achieve a realistic surgical scenario with minimimal animal suffering. Twenty New Zealand white rabbits weighing 3–3.5 kg were divided into four groups depending on the time frame since hernia creation to thoracoscopic repair: 48 h, 72 h, 96 h and 30 days. Bochdalek trigono was identified and procedures for hernia creation and thoracoscopic repair were standarized. Blood was collected for hematology (red blood cells, white blood cells, platelets, hemoglobin and hematocrit), biochemistry (blood urea nitrogen, creatinine, alanine aminotransferase, aspartate aminotransferase, lactate dehydrogenase and creatine kinase) and gas analysis (arterial blood pH, partial pressure of oxygen, partial pressure of carbón dioxide, oxygen saturation and bicarbonate) at baseline and before the surgial repairment. Glucocorticoid metabolites concentration in faeces was measured. Thoracoscopy video recordings were evaluated by six pediatric surgeons and rated from 0 to 10 according to similarities with congenital diaphragmatic hernia in newborn and with its thoracoscopic approach. Statistical methods included the analysis of variance, and comparisons between groups were followed by a post-hoc Tukey’s test. Fourty -eight h showed to be the optimal time frame to obtain a diaphragmatic hernia similar to newborn scenario from a surgical point of view with minimal stress for the animals. PMID:24521868
Segat, Ludovica; Padovan, Lara; Doc, Darja; Petix, Vincenzo; Morgutti, Marcello; Crovella, Sergio; Ricci, Giuseppe
2012-12-01
We describe a real-time polymerase chain reaction (PCR) protocol based on the fluorescent molecule SYBR Green chemistry, for a low- to medium-throughput analysis of Y-chromosome microdeletions, optimized according to the European guidelines and aimed at making the protocol faster, avoiding post-PCR processing, and simplifying the results interpretation. We screened 156 men from the Assisted Reproduction Unit, Department of Obstetrics and Gynecology, Institute for Maternal and Child Health IRCCS Burlo Garofolo (Trieste, Italy), 150 not presenting Y-chromosome microdeletion, and 6 with microdeletions in different azoospermic factor (AZF) regions. For each sample, the Zinc finger Y-chromosomal protein (ZFY), sex-determining region Y (SRY), sY84, sY86, sY127, sY134, sY254, and sY255 loci were analyzed by performing one reaction for each locus. AZF microdeletions were successfully detected in six individuals, confirming the results obtained with commercial kits. Our real-time PCR protocol proved to be a rapid, safe, and relatively cheap method that was suitable for a low- to medium-throughput diagnosis of Y-chromosome microdeletion, which allows an analysis of approximately 10 samples (with the addition of positive and negative controls) in a 96-well plate format, or approximately 46 samples in a 384-well plate for all markers simultaneously, in less than 2 h without the need of post-PCR manipulation.
Ito, Kouta; Shrank, William H; Avorn, Jerry; Patrick, Amanda R; Brennan, Troyen A; Antman, Elliot M; Choudhry, Niteesh K
2012-01-01
Objective To evaluate the comparative cost-effectiveness of interventions to improve adherence to evidence-based medications among postmyocardial infarction (MI) patients. Data Sources/Study Setting Cost-effectiveness analysis. Study Design We developed a Markov model simulating a hypothetical cohort of 65-year-old post-MI patients who were prescribed secondary prevention medications. We evaluated mailed education, disease management, polypill use, and combinations of these interventions. The analysis was performed from a societal perspective over a lifetime horizon. The main outcome was an incremental cost-effectiveness ratio (ICER) as measured by cost per quality-adjusted life year (QALY) gained. Data Collection/Extraction Methods Model inputs were extracted from published literature. Principal Findings Compared with usual care, only mailed education had both improved health outcomes and reduced spending. Mailed education plus disease management, disease management, polypill use, polypill use plus mailed education, and polypill use plus disease management cost were $74,600, $69,200, $133,000, $113,000, and $142,900 per QALY gained, respectively. In an incremental analysis, only mailed education had an ICER of less than $100,000 per QALY and was therefore the optimal strategy. Polypill use, particularly when combined with mailed education, could be cost effective, and potentially cost saving if its price decreased to less than $100 per month. Conclusions Mailed education and a polypill, once available, may be the cost-saving strategies for improving post-MI medication adherence. PMID:22998129
Ito, Kouta; Shrank, William H; Avorn, Jerry; Patrick, Amanda R; Brennan, Troyen A; Antman, Elliot M; Choudhry, Niteesh K
2012-12-01
To evaluate the comparative cost-effectiveness of interventions to improve adherence to evidence-based medications among postmyocardial infarction (MI) patients. Cost-effectiveness analysis. We developed a Markov model simulating a hypothetical cohort of 65-year-old post-MI patients who were prescribed secondary prevention medications. We evaluated mailed education, disease management, polypill use, and combinations of these interventions. The analysis was performed from a societal perspective over a lifetime horizon. The main outcome was an incremental cost-effectiveness ratio (ICER) as measured by cost per quality-adjusted life year (QALY) gained. Model inputs were extracted from published literature. Compared with usual care, only mailed education had both improved health outcomes and reduced spending. Mailed education plus disease management, disease management, polypill use, polypill use plus mailed education, and polypill use plus disease management cost were $74,600, $69,200, $133,000, $113,000, and $142,900 per QALY gained, respectively. In an incremental analysis, only mailed education had an ICER of less than $100,000 per QALY and was therefore the optimal strategy. Polypill use, particularly when combined with mailed education, could be cost effective, and potentially cost saving if its price decreased to less than $100 per month. Mailed education and a polypill, once available, may be the cost-saving strategies for improving post-MI medication adherence. © Health Research and Educational Trust.
An impact analysis of a flexible bat using an iterative solver.
Penrose, J M; Hose, D R
1999-08-01
Although technology has now infiltrated and prompted evolution in most mass participation sports, the advances in bat technology in such sports as baseball and cricket have been relatively minor. In this study, we used a simple finite element modelling approach to try to shed new light upon the underlying mechanics of the bat-ball impact, with a view to the future optimization of bat design. The analysis of a flexible bat showed that the point of impact that produced the maximum post-impact ball velocity was a function of the bat's vibrational properties and was not necessarily at the centre of percussion. The details of the analysis agreed well with traditional Hertzian impact theory, and broadly with empirical data. An inspection of the relative modal contributions to the deformations during impact also showed that the position of the node of the first flexure mode was important. In conclusion, considerable importance should be attached to the bat's vibrational properties in future design and analysis.
Surface and Thin Film Analysis during Metal Organic Vapour Phase Epitaxial Growth
NASA Astrophysics Data System (ADS)
Richter, Wolfgang
2007-06-01
In-situ analysis of epitaxial growth is the essential ingredient in order to understand the growth process, to optimize growth and last but not least to monitor or even control the epitaxial growth on a microscopic scale. In MBE (molecular beam epitaxy) in-situ analysis tools existed right from the beginning because this technique developed from Surface Science technology with all its electron based analysis tools (LEED, RHEED, PES etc). Vapour Phase Epitaxy, in contrast, remained for a long time in an empirical stage ("alchemy") because only post growth characterisations like photoluminescence, Hall effect and electrical conductivity were available. Within the last two decades, however, optical techniques were developed which provide similar capabilities as in MBE for Vapour Phase growth. I will discuss in this paper the potential of Reflectance Anisotropy Spectroscopy (RAS) and Spectroscopic Ellipsometry (SE) for the growth of thin epitaxial semiconductor layers with zincblende (GaAs etc) and wurtzite structure (GaN etc). Other techniques and materials will be also mentioned.
Ong, Edmund; Cahill, Catherine
2015-07-03
The intracellular trafficking of receptors is a collection of complex and highly controlled processes. Receptor trafficking modulates signaling and overall cell responsiveness to ligands and is, itself, influenced by intra- and extracellular conditions, including ligand-induced signaling. Optimized for use with monolayer-plated cultured cells, but extendable to free-floating tissue slices, this protocol uses immunolabelling and colocalizational analysis to track changes in intracellular receptor trafficking following both chronic/prolonged and acute interventions, including exogenous drug treatment. After drug treatment, cells are double-immunolabelled for the receptor and for markers for the intracellular compartments of interest. Sequential confocal microscopy is then used to capture two-channel photomicrographs of individual cells, which are subjected to computerized colocalizational analysis to yield quantitative colocalization scores. These scores are normalized to permit pooling of independent replicates prior to statistical analysis. Representative photomicrographs may also be processed to generate illustrative figures. Here, we describe a powerful and flexible technique for quantitatively assessing induced receptor trafficking.
Thishya, Kalluri; Vattam, Kiran Kumar; Naushad, Shaik Mohammad; Raju, Shree Bhushan
2018-01-01
The objective of the current study was to explore the role of ABCB1 and CYP3A5 genetic polymorphisms in predicting the bioavailability of tacrolimus and the risk for post-transplant diabetes. Artificial neural network (ANN) and logistic regression (LR) models were used to predict the bioavailability of tacrolimus and risk for post-transplant diabetes, respectively. The five-fold cross-validation of ANN model showed good correlation with the experimental data of bioavailability (r2 = 0.93–0.96). Younger age, male gender, optimal body mass index were shown to exhibit lower bioavailability of tacrolimus. ABCB1 1236 C>T and 2677G>T/A showed inverse association while CYP3A5*3 showed a positive association with the bioavailability of tacrolimus. Gender bias was observed in the association with ABCB1 3435 C>T polymorphism. CYP3A5*3 was shown to interact synergistically in increasing the bioavailability in combination with ABCB1 1236 TT or 2677GG genotypes. LR model showed an independent association of ABCB1 2677 G>T/A with post transplant diabetes (OR: 4.83, 95% CI: 1.22–19.03). Multifactor dimensionality reduction analysis (MDR) revealed that synergistic interactions between CYP3A5*3 and ABCB1 2677 G>T/A as the determinants of risk for post-transplant diabetes. To conclude, the ANN and MDR models explore both individual and synergistic effects of variables in modulating the bioavailability of tacrolimus and risk for post-transplant diabetes. PMID:29621269
Compressor and Turbine Multidisciplinary Design for Highly Efficient Micro-gas Turbine
NASA Astrophysics Data System (ADS)
Barsi, Dario; Perrone, Andrea; Qu, Yonglei; Ratto, Luca; Ricci, Gianluca; Sergeev, Vitaliy; Zunino, Pietro
2018-06-01
Multidisciplinary design optimization (MDO) is widely employed to enhance turbomachinery components efficiency. The aim of this work is to describe a complete tool for the aero-mechanical design of a radial inflow turbine and a centrifugal compressor. The high rotational speed of such machines and the high exhaust gas temperature (only for the turbine) expose blades to really high stresses and therefore the aerodynamics design has to be coupled with the mechanical one through an integrated procedure. The described approach employs a fully 3D Reynolds Averaged Navier-Stokes (RANS) solver for the aerodynamics and an open source Finite Element Analysis (FEA) solver for the mechanical integrity assessment. Due to the high computational cost of both these two solvers, a meta model, such as an artificial neural network (ANN), is used to speed up the optimization design process. The interaction between two codes, the mesh generation and the post processing of the results are achieved via in-house developed scripting modules. The obtained results are widely presented and discussed.
Multi-parameter optimization of monolithic high-index contrast grating reflectors
NASA Astrophysics Data System (ADS)
Marciniak, Magdalena; Gebski, Marcin; Dems, Maciej; Wasiak, Michał; Czyszanowski, Tomasz
2016-03-01
Conventional High-index Contrast Gratings (HCG) consist of periodically distributed high refractive index stripes surrounded by low index media. Practically, such low/high index stack can be fabricated in several ways however low refractive index layers are electrical insulators of poor thermal conductivities. Monolithic High-index Contrast Gratings (MHCGs) overcome those limitations since they can be implemented in any material with a real refractive index larger than 1.75 without the need of the combination of low and high refractive index materials. The freedom of use of various materials allows to provide more efficient current injection and better heat flow through the mirror, in contrary to the conventional HCGs. MHCGs can simplify the construction of VCSELs, reducing their epitaxial design to monolithic wafer with carrier confinement and active region inside and etched stripes on both surfaces in post processing. We present numerical analysis of MHCGs using a three-dimensional, fully vectorial optical model. We investigate possible designs of MHCGs using multidimensional optimization of grating parameters for different refractive indices.
Wheatley, Benjamin B.; Fischenich, Kristine M.; Button, Keith D.; Haut, Roger C.; Haut Donahue, Tammy L.
2015-01-01
Inverse finite element (FE) analysis is an effective method to predict material behavior, evaluate mechanical properties, and study differences in biological tissue function. The meniscus plays a key role in load distribution within the knee joint and meniscal degradation is commonly associated with the onset of osteoarthritis. In the current study, a novel transversely isotropic hyper-poro-viscoelastic constitutive formulation was incorporated in a FE model to evaluate changes in meniscal material properties following tibiofemoral joint impact. A non-linear optimization scheme was used to fit the model output to indentation relaxation experimental data. This study is the first to investigate rate of relaxation in healthy versus impacted menisci. Stiffness was found to be decreased (p=0.003), while the rate of tissue relaxation increased (p=0.010) at twelve weeks post impact. Total amount of relaxation, however, did not change in the impacted tissue (p=0.513). PMID:25776872
NASA Astrophysics Data System (ADS)
Paek, Seung Weon; Kang, Jae Hyun; Ha, Naya; Kim, Byung-Moo; Jang, Dae-Hyun; Jeon, Junsu; Kim, DaeWook; Chung, Kun Young; Yu, Sung-eun; Park, Joo Hyun; Bae, SangMin; Song, DongSup; Noh, WooYoung; Kim, YoungDuck; Song, HyunSeok; Choi, HungBok; Kim, Kee Sup; Choi, Kyu-Myung; Choi, Woonhyuk; Jeon, JoongWon; Lee, JinWoo; Kim, Ki-Su; Park, SeongHo; Chung, No-Young; Lee, KangDuck; Hong, YoungKi; Kim, BongSeok
2012-03-01
A set of design for manufacturing (DFM) techniques have been developed and applied to 45nm, 32nm and 28nm logic process technologies. A noble technology combined a number of potential confliction of DFM techniques into a comprehensive solution. These techniques work in three phases for design optimization and one phase for silicon diagnostics. In the DFM prevention phase, foundation IP such as standard cells, IO, and memory and P&R tech file are optimized. In the DFM solution phase, which happens during ECO step, auto fixing of process weak patterns and advanced RC extraction are performed. In the DFM polishing phase, post-layout tuning is done to improve manufacturability. DFM analysis enables prioritization of random and systematic failures. The DFM technique presented in this paper has been silicon-proven with three successful tape-outs in Samsung 32nm processes; about 5% improvement in yield was achieved without any notable side effects. Visual inspection of silicon also confirmed the positive effect of the DFM techniques.
Park, Kyung Soo; Shin, Seung Won; Jang, Min Su; Shin, Woojung; Yang, Kisuk; Min, Junhong; Cho, Seung-Woo; Oh, Byung-Keun; Bae, Jong Wook; Jung, Sunghwan; Choi, Jeong-Woo; Um, Soong Ho
2015-01-01
Accurate cancer diagnosis often requires extraction and purification of genetic materials from cells, and sophisticated instrumentations that follow. Otherwise in order to directly treat the diagnostic materials to cells, multiple steps to optimize dose concentration and treatment time are necessary due to diversity in cellular behaviors. These processes may offer high precision but hinder fast analysis of cancer, especially in clinical situations that need rapid detection and characterization of cancer. Here we present a novel fluorescent tile DNA nanostructure delivered to cancer cytosol by employing nanoparticle technology. Its structural anisotropicity offers easy manipulation for multifunctionalities, enabling the novel DNA nanostructure to detect intracellular cancer RNA markers with high specificity within 30 minutes post treatment, while the nanoparticle property bypasses the requirement of treatment optimization, effectively reducing the complexity of applying the system for cancer diagnosis. Altogether, the system offers a precise and rapid detection of cancer, suggesting the future use in the clinical fields. PMID:26678430
Specialty Task Force: A Strategic Component to Electronic Health Record (EHR) Optimization.
Romero, Mary Rachel; Staub, Allison
2016-01-01
Post-implementation stage comes after an electronic health record (EHR) deployment. Analyst and end users deal with the reality that some of the concepts and designs initially planned and created may not be complementary to the workflow; creating anxiety, dissatisfaction, and failure with early adoption of system. Problems encountered during deployment are numerous and can vary from simple to complex. Redundant ticket submission creates backlog for Information Technology personnel resulting in delays in resolving concerns with EHR system. The process of optimization allows for evaluation of system and reassessment of users' needs. A solid and well executed optimization infrastructure can help minimize unexpected end-user disruptions and help tailor the system to meet regulatory agency goals and practice standards. A well device plan to resolve problems during post implementation is necessary for cost containment and to streamline communication efforts. Creating a specialty specific collaborative task force is efficacious and expedites resolution of users' concerns through a more structured process.
Gladine, C; Meunier, N; Blot, Adeline; Bruchet, Lucile; Pagès, X; Gaud, M; Floter, E; Metin, Z; Rossignol, A; Cano, N; Chardigny, J M
2011-03-01
Numerous micronutrients naturally abundant in oilseeds prevent the risk of cardiovascular diseases by reducing cholesterolemia and oxidative stress. These micronutrients include phytosterols and various antioxidants such as polyphenols, tocopherols and coenzyme Q10/Q9 but most of them are lost during the oilseed oil refining. The main objective of the Optim'Oil project was to modify the processes of oil refining in order to reduce the lost of micronutrients. Two clinical trials (cross-over, monocentric, randomized, double-blind and controlled) were designed to investigate the effect of an optimized rapeseed oil 1) on cardiovascular biomarkers (long-term study) and 2) on oxidative stress parameters (post-prandial study). For the long-term study, 59 volunteers ingested daily 20 g of oil and 22 g of margarine (optimized or standard) for 2 periods of 3 weeks separated by a 3-week wash-out period. Blood samples were collected at the beginning and at the end of each period. For the post-prandial study, a sub-group of 16 volunteers came fasted at the laboratory and took 300 mL of a test meal containing 60% of the optimized or standard oils. Blood samples were collected before and during 6h after the test meal intake. In comparison with the standard oil and margarine, the optimized oil and margarine exhibit as expected an increased content of phytosterol (+22%), polyphenols (× 11), tocopherols (+131%) and coenzyme Q10/Q9 (+165%). Overall, conditions of this study were relevant to investigate the effect of the optimized rapeseed oil and margarine on the cardiovascular risk and the oxidative stress. Copyright © 2010 Elsevier Inc. All rights reserved.
Rattray, Ben; Argus, Christos; Martin, Kristy; Northey, Joseph; Driller, Matthew
2015-01-01
Key Points Central fatigue is accepted as a contributor to overall athletic performance, yet little research directly investigates post-exercise recovery strategies targeting the brainCurrent post-exercise recovery strategies likely impact on the brain through a range of mechanisms, but improvements to these strategies is neededResearch is required to optimize post-exercise recovery with a focus on the brain Post-exercise recovery has largely focused on peripheral mechanisms of fatigue, but there is growing acceptance that fatigue is also contributed to through central mechanisms which demands that attention should be paid to optimizing recovery of the brain. In this narrative review we assemble evidence for the role that many currently utilized recovery strategies may have on the brain, as well as potential mechanisms for their action. The review provides discussion of how common nutritional strategies as well as physical modalities and methods to reduce mental fatigue are likely to interact with the brain, and offer an opportunity for subsequent improved performance. We aim to highlight the fact that many recovery strategies have been designed with the periphery in mind, and that refinement of current methods are likely to provide improvements in minimizing brain fatigue. Whilst we offer a number of recommendations, it is evident that there are many opportunities for improving the research, and practical guidelines in this area. PMID:25852568
Factors related to community participation by stroke victims six month post-stroke.
Jalayondeja, Chutima; Kaewkungwal, Jaranit; Sullivan, Patricia E; Nidhinandana, Samart; Pichaiyongwongdee, Sopa; Jareinpituk, Sutthi
2011-07-01
Participation in the community socially by stroke victims is an optimal outcome post-stroke. We carried out a cohort study to evaluate a model for community participation by Thai stroke victims 6 months post-stroke. Six standardized instruments were used to assess the patient's status 1, 3 and 6 months after stroke. These were the modified Rankin Scale, the National Institute of Health Stroke Scale, the Fugl-Meyer Assessment and the Berg Balance Scale. The performance of activities of daily living and community ambulation were measured using the Barthel Index and walking velocity. Participation in the community was measured by the Stroke Impact Scale. The outcomes demographics and stroke related variables were analyzed using the Generalized Estimating Equations. Of the 98 subjects who completed the follow-up assessment, 72 (86.5%) felt they had more participation in the community 6 months post-stroke. The level of disability, performance of independent activities and length of time receiving physical therapy were associated with the perceived level of participation in the community among stroke victims 6 months post-stroke. To achieve a goal of good participation in the community among stroke victims, health care planning should focus on improving the stroke victim's ability to independently perform daily activities. The average length of physical therapy ranged from 1 to 6 months, at 3 to 8 hours/month. Clinical practice guidelines should be explored to optimize participation in the community.
1999-02-04
level absorbance (data not shown). Based on these During this phase the virus genome is exposed to data. we chose 24 h as the optimal, post-infection...Scanning Watanabe, W., Sudo, K.. Asawa. S.. Konno, K.. Yokota, T., Electron Microscopy, AMF Ohare, IL, pp. 595-600. Shigeta, S., 1995. Use of lactate
Resilience and Health in Repatriated Prisoners of War
2012-12-14
the following: officer status in favor over enlisted status, older at time of capture, less time in solitary confinement, low antisocial ...psychopathic personality , low post-traumatic stress symptoms upon repatriation, and optimism with the latter accounting for the most variance (17%) in the...medical problems were the largest correlations and the most significant, followed by optimism and to a lesser degree antisocial /psychopathic
The Effects of an Emotion Strengthening Training Program on the Optimism Level of Nurses
ERIC Educational Resources Information Center
Balci Celik, Seher
2008-01-01
The aim of this study is to investigate the effects of emotion strengthening as a training programme for optimism for nurses. The experimental and control group of this research was totally composed of 20 nurses. A pre-test post-test research model with control group was used in this research. Nurses' optimistm levels have been measured by…
Final report for project "Next-Generation Semiconductors for Solar Photoelectrolysis"
DOE Office of Scientific and Technical Information (OSTI.GOV)
Khalifah, Peter
2016-09-15
In this paper, effective methods have been developed for preparing high-quality LaTiO 2N films on conductive La 5Ti 5O 17 substrates that can serve as photoanodes for photoelectrochemical water oxidation. One paper has been written by the post-doc who completed this comprehensive, interdisciplinary study, and it is presently being finalized for submission. Our approach to this system integrates expertise that we have developed in single crystal growth, thin film growth, and thin film post-processing. Through this work, LTON films have been fully optimized for light harvesting, as their band gap is optimally matched with the incident solar spectrum and themore » film thicknesses have been optimized based on the absolute absorption coefficients that we have measured for this system. The next step is to optimize the co-catalyst functionalization and the solution conditions to maximize the catalytic activity for water oxidation. Since the preliminary tests described here were done without a water oxidation co-catalyst, and since good water oxidation catalysts have previously been identified based on studies of powder samples, this next step is highly likely to be successful.« less
Xu, Xuexin; Zhang, Yinghua; Li, Jinpeng; Zhang, Meng; Zhou, Xiaonan; Zhou, Shunli; Wang, Zhimin
2018-01-01
Improving winter wheat grain yield and water use efficiency (WUE) with minimum irrigation is very important for ensuring agricultural and ecological sustainability in the Northern China Plain (NCP). A three-year field experiment was conducted to determine how single irrigation can improve grain yield and WUE by manipulating the "sink-source" relationships. To achieve this, no-irrigation after sowing (W0) as a control, and five single irrigation treatments after sowing (75 mm of each irrigation) were established. They included irrigation at upstanding (WU), irrigation at jointing (WJ), irrigation at booting (WB), irrigation at anthesis (WA) and irrigation at medium milk (WM). Results showed that compared with no-irrigation after sowing (W0), WU, WJ, WB, WA and WM significantly improved mean grain yield by 14.1%, 19.9%, 17.9%, 11.6%, and 7.5%, respectively. WJ achieved the highest grain yield (8653.1 kg ha-1) and WUE (20.3 kg ha-1 mm-1), and WB observed the same level of grain yield and WUE as WJ. In comparison to WU, WJ and WB coordinated pre- and post-anthesis water use while reducing pre-anthesis and total evapotranspiration (ET). They also retained higher soil water content above 180 cm soil layers at anthesis, increased post-anthesis water use, and ultimately increased WUE. WJ and WB optimized population quantity and individual leaf size, delayed leaf senescence, extended grain-filling duration, improved post-anthesis biomass and biomass remobilization (source supply capacity) as well as post-anthesis biomass per unit anthesis leaf area (PostBA-leaf ratio). WJ also optimized the allocation of assimilation, increased the spike partitioning index (SPI, spike biomass/biomass at anthesis) and grain production efficiency (GPE, the ratio of grain number to biomass at anthesis), thus improved mean sink capacity by 28.1%, 5.7%, 21.9%, and 26.7% in comparison to W0, WU, WA and WM, respectively. Compared with WA and WM, WJ and WB also increased sink capacity, post-anthesis biomass and biomass remobilization. These results demonstrated that single irrigation at jointing or booting could improve grain yield and WUE via coordinating the "source-sink" relationships with the high sink capacity and source supply capacity. Therefore, we propose that under adequate soil moisture conditions before sowing, single irrigation scheme from jointing to booting with 75 mm irrigation amount is the optimal minimum irrigation practice for wheat production in this region.
Brogly, Nicolas; Schiraldi, Renato; Puertas, Laura; Maggi, Genaro; Yanci, Eduardo Alonso; Maldonado, Ever Hugo Martinez; Arévalo, Emilia Guasch; Rodríguez, Fernando Gilsanz
2016-01-01
The delivery of cardiac patients is a challenge for the anaesthesiologist, to whom the welfare of both the mother and the foetus is a main issue. In case of caesarean section, advanced monitoring allows to optimize haemodynamic condition and to improve morbidity and mortality. To describe the use of pulse contour analysis calibrated by Trans-pulmonar thermodilution (Picco Plus(®)) for the perioperative management of a caesarean section in a patient with severe cardiomyopathy. We describe the case of a 28-year-old woman with a congenital heart disease who was submitted to a caesarean section under general anaesthesia for maternal pathology and foetal breech presentation. Intra- and post-operative management was optimized by advanced haemodynamic monitorization obtained by pulse contour wave analysis and thermodilution calibration (Picco Plus(®) monitor). The information about preload, myocardial contractility and postcharge was useful in guiding the fluid therapy and the use of vasoactive drugs. This case report illustrates the importance of advanced haemodynamic monitoring with an acceptably invasive device in obstetric patients with high cardiac risk. The increasing experience in advanced haemodynamic management will probably permit to decrease morbidity and mortality of obstetric patients in the future. Copyright © 2013 Sociedade Brasileira de Anestesiologia. Published by Elsevier Editora Ltda. All rights reserved.
Brogly, Nicolas; Schiraldi, Renato; Puertas, Laura; Maggi, Genaro; Yanci, Eduardo Alonso; Maldonado, Ever Hugo Martinez; Arévalo, Emilia Guasch; Rodríguez, Fernando Gilsanz
2016-01-01
The delivery of cardiac patients is a challenge for the anaesthesiologist, to whom the welfare of both the mother and the foetus is a main issue. In case of caesarean section, advanced monitoring allows to optimize haemodynamic condition and to improve morbidity and mortality. To describe the use of pulse contour analysis calibrated by Trans-pulmonar thermodilution (Picco Plus(®)) for the perioperative management of a caesarean section in a patient with severe cardiomyopathy. We describe the case of a 28-year-old woman with a congenital heart disease who was submitted to a caesarean section under general anaesthesia for maternal pathology and foetal breech presentation. Intra- and post-operative management was optimized by advanced haemodynamic monitorization obtained by pulse contour wave analysis and thermodilution calibration (Picco Plus(®) monitor). The information about preload, myocardial contractility and postcharge was useful in guiding the fluid therapy and the use of vasoactive drugs. This case report illustrates the importance of advanced haemodynamic monitoring with an acceptably invasive device in obstetric patients with high cardiac risk. The increasing experience in advanced haemodynamic management will probably permit to decrease morbidity and mortality of obstetric patients in the future. Copyright © 2013 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.
Rommel, Nathalie; Omari, Taher I; Selleslagh, Margot; Kritas, Stamatiki; Cock, Charles; Rosan, Rachel; Rodriguez, Leonel; Nurko, Samuel
2015-12-01
Pressure-flow analysis allows assessing esophageal bolus transport in relation to esophageal pressures. This study aimed to characterize pressure-flow metrics in relation to dysphagia in paediatric patients. We analysed esophageal pressure-impedance recordings of 5 ml liquid and viscous swallows from 35 children (17 M, mean 10.5 ± 0.8 years). Primary indication for referral was gastroesophageal reflux disease (GERD) (9), post-fundoplication dysphagia (5), idiopathic dysphagia (16), trachea-esophageal fistula (2) and other (3). Peristaltic function was assessed using the 20 mmHg iso-contour defect and the timing between bolus pressure and flow was assessed using the Pressure Flow Index, a metric elevated in relation to dysphagia. Patients were stratified in relation to dysphagia and to peristaltic defect size. Dysphagia was characterized by a weaker peristalsis for liquids and higher Pressure Flow Index for viscous. When patients were stratified based on weak or normal peristalsis, dysphagia with weak peristalsis related to a larger iso-contour defect size and dysphagia with normal peristalsis related to higher Pressure Flow Index. Pressure-flow analysis enables differentiation of patients with dysphagia due to weak peristalsis (poor bolus clearance) from abnormal bolus flow resistance (esophageal outflow obstruction). This new dichotomous categorization of esophageal function may help guide the selection of optimal treatment such as pharmacological or endoscopic therapy. • Pressure-flow analysis (PFA) can detect abnormalities in esophageal motility using integrated analysis of bolus propulsion and bolus flow during swallowing. • AIM analysis has recently been reported to be useful in identifying subtle pre-operative esophageal dysfunction in adult patients who developed post-fundoplication dysphagia as well as in patients with non-obstructive dysphagia. • Pressure-flow parameters can distinguish the cause of dysphagia in paediatric patients. • Combined high-resolution manometry and impedance measurements with pressure-flow analysis can differentiate paediatric patients with dysphagia symptoms in relation to either weak peristalsis (poor bolus clearance) or over-pressurization (abnormal bolus flow resistance). HOW MIGHT IT IMPACT ON CLINICAL PRACTICE IN THE FUTURE? • This study supports the use of a novel objective analysis method on recordings that are readily used in paediatric clinical practice. • The pressure-flow approach allows discriminating esophageal dysfunction in relation to dysphagia symptoms in children. This has not been achieved in children with current analysis methods. • The new findings of this study allow a dichotomous categorization of esophageal function, which may help to guide the selection of the most optimal treatment such as pharmacological or endoscopic therapy.
NASA Astrophysics Data System (ADS)
Tian, Hao; Kuang, Xiao-Yu; Mao, Ai-Jie; Yang, Yurong; Xu, Changsong; Sayedaghaee, S. Omid; Bellaiche, L.
2018-01-01
High-melting-point oxides of chemical formula A B O3 with A =Ca , Sr, Ba and B =Zr , Hf are investigated as a function of hydrostatic pressure up to 200 GPa by combining first-principles calculations with a particle swarm optimization method. Ca- and Sr-based systems: (1) first undergo a reconstructive phase transition from a perovskite state to a novel structure that belongs to the post-post-perovskite family and (2) then experience an isostructural transition to a second, also new post-post-perovskite state at higher pressures, via the sudden formation of a specific out-of-plane B -O bond. In contrast, the studied Ba compounds evolve from a perovskite phase to a third novel post-post-perovskite structure via another reconstructive phase transition. The original characteristics of these three different post-post-perovskite states are emphasized. Unusual electronic properties, including significant piezochromic effects and an insulator-metal transition, are also reported and explained.
Avazmohammadi, Reza; Li, David S; Leahy, Thomas; Shih, Elizabeth; Soares, João S; Gorman, Joseph H; Gorman, Robert C; Sacks, Michael S
2018-02-01
Knowledge of the complete three-dimensional (3D) mechanical behavior of soft tissues is essential in understanding their pathophysiology and in developing novel therapies. Despite significant progress made in experimentation and modeling, a complete approach for the full characterization of soft tissue 3D behavior remains elusive. A major challenge is the complex architecture of soft tissues, such as myocardium, which endows them with strongly anisotropic and heterogeneous mechanical properties. Available experimental approaches for quantifying the 3D mechanical behavior of myocardium are limited to preselected planar biaxial and 3D cuboidal shear tests. These approaches fall short in pursuing a model-driven approach that operates over the full kinematic space. To address these limitations, we took the following approach. First, based on a kinematical analysis and using a given strain energy density function (SEDF), we obtained an optimal set of displacement paths based on the full 3D deformation gradient tensor. We then applied this optimal set to obtain novel experimental data from a 1-cm cube of post-infarcted left ventricular myocardium. Next, we developed an inverse finite element (FE) simulation of the experimental configuration embedded in a parameter optimization scheme for estimation of the SEDF parameters. Notable features of this approach include: (i) enhanced determinability and predictive capability of the estimated parameters following an optimal design of experiments, (ii) accurate simulation of the experimental setup and transmural variation of local fiber directions in the FE environment, and (iii) application of all displacement paths to a single specimen to minimize testing time so that tissue viability could be maintained. Our results indicated that, in contrast to the common approach of conducting preselected tests and choosing an SEDF a posteriori, the optimal design of experiments, integrated with a chosen SEDF and full 3D kinematics, leads to a more robust characterization of the mechanical behavior of myocardium and higher predictive capabilities of the SEDF. The methodology proposed and demonstrated herein will ultimately provide a means to reliably predict tissue-level behaviors, thus facilitating organ-level simulations for efficient diagnosis and evaluation of potential treatments. While applied to myocardium, such developments are also applicable to characterization of other types of soft tissues.
Wang, Chia-Chi; Lin, Shu-Cheng; Hsu, Shu-Ching; Yang, Ming-Ta; Chan, Kuei-Hui
2017-10-27
Creatine supplementation reduces the impact of muscle fatigue on post-activation potentiation (PAP) of the lower body, but its effects on the upper body remain unknown. This study examined the effects of creatine supplementation on muscle strength, explosive power, and optimal individual PAP time of the upper body during a set of complex training bouts in canoeists. Seventeen male high school canoeists performed a bench row for one repetition at maximum strength and conducted complex training bouts to determine the optimal individual timing of PAP and distance of overhead medicine ball throw before and after the supplementation. Subjects were assigned to a creatine or placebo group, and later consumed 20 g of creatine or carboxymethyl cellulose per day for six days. After supplementation, the maximal strength in the creatine group significantly increased ( p < 0.05). The optimal individual PAP time in the creatine group was significantly earlier than the pre-supplementation times ( p < 0.05). There was no significant change in explosive power for either group. Our findings support the notion that creatine supplementation increases maximal strength and shortens the optimal individual PAP time of the upper body in high school athletes, but has no effect on explosive power. Moreover, it was found that the recovery time between a bench row and an overhead medicine ball throw in a complex training bout is an individual phenomenon.
NASA Astrophysics Data System (ADS)
Gordon, Isabel Jiménez; Genies, Sylvie; Si Larbi, Gregory; Boulineau, Adrien; Daniel, Lise; Alias, Mélanie
2016-03-01
Understanding ageing mechanisms of Li-ion batteries is essential for further optimizations. To determine performance loss causes, post-mortem analyses are commonly applied. For each type of post-mortem test, different sample preparation protocols are adopted. However, reports on the reliability of these protocols are rare. Herein, Li-ion pouch cells with LiNi1/3Mn1/3Co1/3O2 - polyvinylidene fluoride positive electrode, graphite-carboxymethyl cellulose-styrene rubber negative electrode and LiPF6 - carbonate solvents mixture electrolyte, are opened and electrodes are recovered following a specified protocol. Negative and positive symmetric cells are assembled and their impedances are recorded. A signal analysis is applied to reconstruct the Li-ion pouch cell impedance from the symmetric cells, then comparison against the pouch cell true impedance allows the evaluation of the sample preparation protocols. The results are endorsed by Transmission Electronic Microscopy (TEM) and Gas Chromatography - Mass Spectrometry (GC-MS) analyses. Carbonate solvents used to remove the salt impacts slightly the surface properties of both electrodes. Drying electrodes under vacuum at 25 °C produces an impedance increase, particularly very marked for the positive electrode. Drying at 50 °C under vacuum or/and exposition to the anhydrous room atmosphere is very detrimental.
Bimodal behavior of post-measured entropy and one-way quantum deficit for two-qubit X states
NASA Astrophysics Data System (ADS)
Yurischev, Mikhail A.
2018-01-01
A method for calculating the one-way quantum deficit is developed. It involves a careful study of post-measured entropy shapes. We discovered that in some regions of X-state space the post-measured entropy \\tilde{S} as a function of measurement angle θ \\in [0,π /2] exhibits a bimodal behavior inside the open interval (0,π /2), i.e., it has two interior extrema: one minimum and one maximum. Furthermore, cases are found when the interior minimum of such a bimodal function \\tilde{S}(θ ) is less than that one at the endpoint θ =0 or π /2. This leads to the formation of a boundary between the phases of one-way quantum deficit via finite jumps of optimal measured angle from the endpoint to the interior minimum. Phase diagram is built up for a two-parameter family of X states. The subregions with variable optimal measured angle are around 1% of the total region, with their relative linear sizes achieving 17.5%, and the fidelity between the states of those subregions can be reduced to F=0.968. In addition, a correction to the one-way deficit due to the interior minimum can achieve 2.3%. Such conditions are favorable to detect the subregions with variable optimal measured angle of one-way quantum deficit in an experiment.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-26
..., 2011, the Department issued its Post-Preliminary Analysis of Cross-ownership and its Post- Preliminary Analysis of New Subsidy Allegations. On that date, the Department also issued its Post-Preliminary Analysis... Post-Preliminary Analysis: GOK Preferential Lending Under the Daewoo Workout, and the GOK, LGE, SEC...
SAR-based change detection using hypothesis testing and Markov random field modelling
NASA Astrophysics Data System (ADS)
Cao, W.; Martinis, S.
2015-04-01
The objective of this study is to automatically detect changed areas caused by natural disasters from bi-temporal co-registered and calibrated TerraSAR-X data. The technique in this paper consists of two steps: Firstly, an automatic coarse detection step is applied based on a statistical hypothesis test for initializing the classification. The original analytical formula as proposed in the constant false alarm rate (CFAR) edge detector is reviewed and rewritten in a compact form of the incomplete beta function, which is a builtin routine in commercial scientific software such as MATLAB and IDL. Secondly, a post-classification step is introduced to optimize the noisy classification result in the previous step. Generally, an optimization problem can be formulated as a Markov random field (MRF) on which the quality of a classification is measured by an energy function. The optimal classification based on the MRF is related to the lowest energy value. Previous studies provide methods for the optimization problem using MRFs, such as the iterated conditional modes (ICM) algorithm. Recently, a novel algorithm was presented based on graph-cut theory. This method transforms a MRF to an equivalent graph and solves the optimization problem by a max-flow/min-cut algorithm on the graph. In this study this graph-cut algorithm is applied iteratively to improve the coarse classification. At each iteration the parameters of the energy function for the current classification are set by the logarithmic probability density function (PDF). The relevant parameters are estimated by the method of logarithmic cumulants (MoLC). Experiments are performed using two flood events in Germany and Australia in 2011 and a forest fire on La Palma in 2009 using pre- and post-event TerraSAR-X data. The results show convincing coarse classifications and considerable improvement by the graph-cut post-classification step.
Saba, Luca; Atzeni, Matteo; Ribuffo, Diego; Mallarini, Giorgio; Suri, Jasjit S
2012-08-01
Our purpose was to compare two post-processing techniques, Maximum-Intensity-Projection (MIP) and Volume Rendering (VR) for the study of perforator arteries. Thirty patients who underwent Multi-Detector-Row CT Angiography (MDCTA) between February 2010 and May 2010 were retrospectively analyzed. For each patient and for each reconstruction method, the image quality was evaluated and the inter- and intra-observer agreement was calculated according to the Cohen statistics. The Hounsfield Unit (HU) value in the common femoral artery was quantified and the correlation (Pearson Statistic) between image quality and HU value was explored. The Pearson r between the right and left common femoral artery was excellent (r=0.955). The highest image quality score was obtained using MIP for both observers (total value 75, with a mean value 2.67 for observer 1 and total value of 79 and a mean value of 2.82 for observer 2). The highest agreement between the two observers was detected using the MIP protocol with a Cohen kappa value of 0.856. The ROC area under the curve (Az) for the VR is 0.786 (0.086 SD; p value=0.0009) whereas the ROC area under the curve (Az) for the MIP is 0.0928 (0.051 SD; p value=0.0001). MIP showed the optimal inter- and intra-observer agreement and the highest quality scores and therefore should be used as post-processing techniques in the analysis of perforating arteries. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.
Borri, Marco; Schmidt, Maria A; Powell, Ceri; Koh, Dow-Mu; Riddell, Angela M; Partridge, Mike; Bhide, Shreerang A; Nutting, Christopher M; Harrington, Kevin J; Newbold, Katie L; Leach, Martin O
2015-01-01
To describe a methodology, based on cluster analysis, to partition multi-parametric functional imaging data into groups (or clusters) of similar functional characteristics, with the aim of characterizing functional heterogeneity within head and neck tumour volumes. To evaluate the performance of the proposed approach on a set of longitudinal MRI data, analysing the evolution of the obtained sub-sets with treatment. The cluster analysis workflow was applied to a combination of dynamic contrast-enhanced and diffusion-weighted imaging MRI data from a cohort of squamous cell carcinoma of the head and neck patients. Cumulative distributions of voxels, containing pre and post-treatment data and including both primary tumours and lymph nodes, were partitioned into k clusters (k = 2, 3 or 4). Principal component analysis and cluster validation were employed to investigate data composition and to independently determine the optimal number of clusters. The evolution of the resulting sub-regions with induction chemotherapy treatment was assessed relative to the number of clusters. The clustering algorithm was able to separate clusters which significantly reduced in voxel number following induction chemotherapy from clusters with a non-significant reduction. Partitioning with the optimal number of clusters (k = 4), determined with cluster validation, produced the best separation between reducing and non-reducing clusters. The proposed methodology was able to identify tumour sub-regions with distinct functional properties, independently separating clusters which were affected differently by treatment. This work demonstrates that unsupervised cluster analysis, with no prior knowledge of the data, can be employed to provide a multi-parametric characterization of functional heterogeneity within tumour volumes.
Lutz, David A; Burakowski, Elizabeth A; Murphy, Mackenzie B; Borsuk, Mark E; Niemiec, Rebecca M; Howarth, Richard B
2016-01-01
Forests are more frequently being managed to store and sequester carbon for the purposes of climate change mitigation. Generally, this practice involves long-term conservation of intact mature forests and/or reductions in the frequency and intensity of timber harvests. However, incorporating the influence of forest surface albedo often suggests that long rotation lengths may not always be optimal in mitigating climate change in forests characterized by frequent snowfall. To address this, we investigated trade-offs between three ecosystem services: carbon storage, albedo-related radiative forcing, and timber provisioning. We calculated optimal rotation length at 498 diverse Forest Inventory and Analysis forest sites in the state of New Hampshire, USA. We found that the mean optimal rotation lengths across all sites was 94 yr (standard deviation of sample means = 44 yr), with a large cluster of short optimal rotation lengths that were calculated at high elevations in the White Mountain National Forest. Using a regression tree approach, we found that timber growth, annual storage of carbon, and the difference between annual albedo in mature forest vs. a post-harvest landscape were the most important variables that influenced optimal rotation. Additionally, we found that the choice of a baseline albedo value for each site significantly altered the optimal rotation lengths across all sites, lowering the mean rotation to 59 yr with a high albedo baseline, and increasing the mean rotation to 112 yr given a low albedo baseline. Given these results, we suggest that utilizing temperate forests in New Hampshire for climate mitigation purposes through carbon storage and the cessation of harvest is appropriate at a site-dependent level that varies significantly across the state.
Watershed Management Optimization Support Tool (WMOST) ...
EPA's Watershed Management Optimization Support Tool (WMOST) version 2 is a decision support tool designed to facilitate integrated water management by communities at the small watershed scale. WMOST allows users to look across management options in stormwater (including green infrastructure), wastewater, drinking water, and land conservation programs to find the least cost solutions. The pdf version of these presentations accompany the recorded webinar with closed captions to be posted on the WMOST web page. The webinar was recorded at the time a training workshop took place for EPA's Watershed Management Optimization Support Tool (WMOST, v2).
Proteomic analysis and comparison of the biopsy and autopsy specimen of human brain temporal lobe.
He, Sizhi; Wang, Qingsong; He, Jintang; Pu, Hai; Yang, Wei; Ji, Jianguo
2006-09-01
The proteomic study on human temporal lobe can help us to understand the physiological function of CNS in normal as well as in pathological state. Proteomic tools are potent for the assessment of protein stability post mortem. In this pilot study, the human temporal lobe biopsy specimen with chronic pharmacoresistant temporal lobe epilepsy (TLE) and autopsy specimen in control were separated by 2-DE. Using MALDI-TOF-MS and MS/MS, 375 protein spots were identified which were the products of 267 genes. Six down-regulated and 23 up-regulated protein spots in the autopsy specimen were ascertained after the gel image analysis with the ImageMaster software. A number of proteins that include neurotransmitter metabolic and glycolytic enzymes, cytoprotective proteins and cytoskeleton were found decreased while the precursor of apolipoprotein A-I increased in the TLE brain. We tried several methods to prepare the protein samples and found that DNase and RNase treatment, ultracentrifugation and Amersham clean-up kit purification can improve gel separation quality. This work optimized the sample preparation method and constructed a primary protein database of human temporal lobe and found some proteins with remarkable level change probably involved in the post-mortem process and chronic pharmacoresistant TLE pathogenesis.
Hilton, Gillean; Unsworth, Carolyn A; Stuckey, Ruth; Murphy, Gregory C
2018-01-01
Vocational potential in people with spinal cord injury (SCI) are unrealised with rates of employment substantially lower than in the labour force participation of the general population and the pre-injury employment rates. To understand the experience and pathway of people achieving employment outcome after traumatic spinal cord injury by; classifying participants into employment outcome groups of stable, unstable and without employment; identifying pre and post-injury pathways for participants in each group and, exploring the experiences of people of seeking, gaining and maintaining employment. Thirty-one participants were interviewed. Mixed methods approach including interpretive phenomenological analysis and vocational pathway mapping of quantitative data. The most common pathway identified was from study and work pre-injury to stable employment post-injury. Four super-ordinate themes were identified from the interpretive phenomenological analysis; expectations of work, system impacts, worker identity and social supports. Implications for clinical practice include fostering cultural change, strategies for system navigation, promotion of worker identity and optimal use of social supports. The findings increase insight and understanding of the complex experience of employment after spinal cord injury. There is opportunity to guide experimental research, policy development and education concerning the complexity of the return to work experience and factors that influence pathways.
Stress Recovery and Error Estimation for 3-D Shell Structures
NASA Technical Reports Server (NTRS)
Riggs, H. R.
2000-01-01
The C1-continuous stress fields obtained from finite element analyses are in general lower- order accurate than are the corresponding displacement fields. Much effort has focussed on increasing their accuracy and/or their continuity, both for improved stress prediction and especially error estimation. A previous project developed a penalized, discrete least squares variational procedure that increases the accuracy and continuity of the stress field. The variational problem is solved by a post-processing, 'finite-element-type' analysis to recover a smooth, more accurate, C1-continuous stress field given the 'raw' finite element stresses. This analysis has been named the SEA/PDLS. The recovered stress field can be used in a posteriori error estimators, such as the Zienkiewicz-Zhu error estimator or equilibrium error estimators. The procedure was well-developed for the two-dimensional (plane) case involving low-order finite elements. It has been demonstrated that, if optimal finite element stresses are used for the post-processing, the recovered stress field is globally superconvergent. Extension of this work to three dimensional solids is straightforward. Attachment: Stress recovery and error estimation for shell structure (abstract only). A 4-node, shear-deformable flat shell element developed via explicit Kirchhoff constraints (abstract only). A novel four-node quadrilateral smoothing element for stress enhancement and error estimation (abstract only).
ERIC Educational Resources Information Center
Fejoh, Johnson; Faniran, Victoria Loveth
2016-01-01
This study investigated the impact of in-service training and staff development on workers' job performance and optimal productivity in public secondary schools in Osun State, Nigeria. The study used the ex-post-facto research design. Three research questions and three hypotheses were generated and tested using questionnaire items adapted from…
Bonanno, C; Ometto, R; Finocchi, G; Rulfo, F; La Vecchia, L; Vincenzi, M
1999-12-01
Incessant ventricular tachycardia is an arrhythmia refractory to conventional antiarrhythmic treatment. We describe the case of 55-year-old man who presented incessant ventricular tachycardia in the early post-acute phase of myocardial infarction. Optimal coronary revascularization was not effective, but radiofrequency catheter ablation was able to eliminate the anatomic substrate and clinical arrhythmic recurrence.
iCLIP: Protein–RNA interactions at nucleotide resolution
Huppertz, Ina; Attig, Jan; D’Ambrogio, Andrea; Easton, Laura E.; Sibley, Christopher R.; Sugimoto, Yoichiro; Tajnik, Mojca; König, Julian; Ule, Jernej
2014-01-01
RNA-binding proteins (RBPs) are key players in the post-transcriptional regulation of gene expression. Precise knowledge about their binding sites is therefore critical to unravel their molecular function and to understand their role in development and disease. Individual-nucleotide resolution UV crosslinking and immunoprecipitation (iCLIP) identifies protein–RNA crosslink sites on a genome-wide scale. The high resolution and specificity of this method are achieved by an intramolecular cDNA circularization step that enables analysis of cDNAs that truncated at the protein–RNA crosslink sites. Here, we describe the improved iCLIP protocol and discuss critical optimization and control experiments that are required when applying the method to new RBPs. PMID:24184352
ERIC Educational Resources Information Center
White, Tarsha D.
2014-01-01
Broad inferences have been made that the election of a Black American President indicates that America now functions in a post-racist society. This optimism has fueled a major discussion for changes in American policies which directly affect minorities; in particular, those related to affirmative action in higher education are under attack. Due to…
2014-01-01
Background Pain is a troublesome non-motor symptom of Parkinson’s disease (PD). The RECOVER (Randomized Evaluation of the 24-hour Coverage: Efficacy of Rotigotine; Clintrials.gov: NCT00474058) study demonstrated significant improvements in early-morning motor function (UPDRS III) and sleep disturbances (PDSS-2) with rotigotine transdermal system. Improvements were also reported on a Likert pain scale (measuring any type of pain). This post hoc analysis of RECOVER further evaluates the effect of rotigotine on pain, and whether improvements in pain may be attributable to benefits in motor function or sleep disturbance. Methods PD patients with unsatisfactory early-morning motor impairment were randomized to optimal-dose (up to 16 mg/24 h) rotigotine or placebo, maintained for 4 weeks. Pain was assessed in the early-morning using an 11-point Likert pain scale (rated average severity of pain (of any type) over the preceding 12 hours from 0 [no pain] to 10 [worst pain ever experienced]). Post hoc analyses for patients reporting ‘any’ pain (pain score ≥1) at baseline, and subgroups reporting ‘mild’ (score 1–3), and ‘moderate-to-severe’ pain (score ≥4) were performed. Likert pain scale change from baseline in rotigotine-treated patients was further analyzed based on a UPDRS III/PDSS-2 responder analysis (a responder defined as showing a ≥30% reduction in early morning UPDRS III total score or PDSS-2 total score). As post hoc analyses, all p values presented are exploratory. Results Of 267 patients with Likert pain data (178 rotigotine, 89 placebo), 187 (70%) reported ‘any’ pain; of these 87 (33%) reported ‘mild’, and 100 (37%) ‘moderate-to-severe’ pain. Change from baseline pain scores decreased with rotigotine compared with placebo in patients with ‘any’ pain (-0.88 [95% CI: -1.56, -0.19], p = 0.013), and in the subgroup with ‘moderate-to-severe’ pain (-1.38 [-2.44, -0.31], p = 0.012). UPDRS III or PDSS-2 responders showed greater improvement in pain than non-responders. Conclusions The results from this post hoc analysis of the RECOVER study suggest that pain was improved in patients with PD treated with rotigotine; this may be partly attributable to benefits in motor function and sleep disturbances. Prospective studies are warranted to investigate this potential benefit and the clinical relevance of these findings. PMID:24602411
Universal route to optimal few- to single-cycle pulse generation in hollow-core fiber compressors.
Conejero Jarque, E; San Roman, J; Silva, F; Romero, R; Holgado, W; Gonzalez-Galicia, M A; Alonso, B; Sola, I J; Crespo, H
2018-02-02
Gas-filled hollow-core fiber (HCF) pulse post-compressors generating few- to single-cycle pulses are a key enabling tool for attosecond science and ultrafast spectroscopy. Achieving optimum performance in this regime can be extremely challenging due to the ultra-broad bandwidth of the pulses and the need of an adequate temporal diagnostic. These difficulties have hindered the full exploitation of HCF post-compressors, namely the generation of stable and high-quality near-Fourier-transform-limited pulses. Here we show that, independently of conditions such as the type of gas or the laser system used, there is a universal route to obtain the shortest stable output pulse down to the single-cycle regime. Numerical simulations and experimental measurements performed with the dispersion-scan technique reveal that, in quite general conditions, post-compressed pulses exhibit a residual third-order dispersion intrinsic to optimum nonlinear propagation within the fiber, in agreement with measurements independently performed in several laboratories around the world. The understanding of this effect and its adequate correction, e.g. using simple transparent optical media, enables achieving high-quality post-compressed pulses with only minor changes in existing setups. These optimized sources have impact in many fields of science and technology and should enable new and exciting applications in the few- to single-cycle pulse regime.
The Third Air Force/NASA Symposium on Recent Advances in Multidisciplinary Analysis and Optimization
NASA Technical Reports Server (NTRS)
1990-01-01
The third Air Force/NASA Symposium on Recent Advances in Multidisciplinary Analysis and Optimization was held on 24-26 Sept. 1990. Sessions were on the following topics: dynamics and controls; multilevel optimization; sensitivity analysis; aerodynamic design software systems; optimization theory; analysis and design; shape optimization; vehicle components; structural optimization; aeroelasticity; artificial intelligence; multidisciplinary optimization; and composites.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Meerschaert, R; Paul, A; Chen, W
Purpose: To identify indicators for recurrence in cervical cancer patients treated with high-dose-rate brachytherapy (HDR-BT). Methods: A total of 37 biopsy proven uterine cervical cancer patients of stage IB-IVA treated between 2011 and 2015 were included in this study. All patients were treated with 37.8–52.2Gy of external beam radiotherapy (EBRT) plus 5 × 5.0–6.5Gy of HDR-BT. Patient age, standard deviation of high-risk clinical tumor volume (HR-CTVSD) collected throughout HDR-BT, and D90 (EQD2, α/β=10Gy) of the HR-CTV were investigated as potential indicators for local/distant recurrence using ROC analysis. The optimal cutoff value was identified through the Youden index and was subsequentlymore » used to obtain a group assignment for all patients. Another two comparing groups were defined per evidence of post-EBRT tumor shrinkage based on the pre-HDR MR scan. Kaplan-Meier curves were generated for recurrence-free proportions for comparing groups where time was measured from the final HDR treatment date to the date of the final follow-up exam and compared through Cox regression. Results: Patients had a median follow-up of 12 months, where 16% had local pelvic recurrence and 16% had distant recurrence. HR-CTVSD was identified as a statistically significant indicator for recurrence (AUC=0.802, p=0.007) compared to D90 (AUC=0.655, p=0.167) and patient age (AUC=0.683, p=0.103). HR-CTVSD of 6.26cc was chosen as the optimal cutoff value, which was used as the basis for patient group assignment. Patients with HR-CTVSD>6.26cc had a hazard ratio of 3.92 (95% CI-1.37, 11.24; p=0.011) for recurrence compared to HRCTVSD≤ 6.26cc. Patients without evidence of post-EBRT tumor shrinkage compared to those with had a hazard ratio of 4.28 (95% CI-1.14, 16.15; p=0.032) for recurrence. Conclusion: HR-CTVSD was identified as an indicator for recurrence and an optimal value of 6.26cc was established in our study. In addition, patients without evidence of post-EBRT tumor shrinkage demonstrated an increased recurrence rate.« less
Wigal, Sharon B; Childress, Ann; Berry, Sally A; Belden, Heidi W; Chappell, Phillip; Wajsbrot, Dalia B; Nagraj, Praneeta; Abbas, Richat; Palumbo, Donna
2018-06-01
To examine methylphenidate extended-release chewable tablets (MPH ERCT) dose patterns, attention-deficit/hyperactivity disorder (ADHD) symptom scores, and safety during the 6-week, open-label (OL) dose-optimization period of a phase 3, laboratory classroom study. Boys and girls (6-12 years) diagnosed with ADHD were enrolled. MPH ERCT was initiated at 20 mg/day; participants were titrated in 10-20 mg/day increments weekly based on efficacy and tolerability (maximum dose, 60 mg/day). Dose-optimization period efficacy assessments included the ADHD Rating Scale (ADHD-RS-IV), analyzed by week in a post hoc analysis using a mixed-effects model for repeated measures with final optimized dose (20, 30/40, or 50/60 mg), visit, final optimized dose and visit interaction, and baseline score as terms. Adverse events (AEs) and concomitant medications were collected throughout the study. Mean MPH ERCT daily dose increased weekly from 29.4 mg/day after the first dose adjustment at week 1 (n = 90) to 42.8 mg/day after the final adjustment at week 5 (n = 86). Final optimized MPH ERCT dose ranged from 20 to 60 mg/day. Mean final optimized MPH ERCT dose ranged from 40.0 mg/day in 6-8 year-old participants to 44.8 mg/day for 11-12 year-old participants. There was a progressive decrease in mean (standard deviation) ADHD-RS-IV total score from 40.1 (8.72) at baseline to 12.4 (7.88) at OL week 5, with similar improvement patterns for hyperactivity/impulsivity and inattentiveness subscale scores. Participants optimized to MPH ERCT 50/60 mg/day had a significantly higher mean (standard error) ADHD-RS-IV score at baseline compared with participants optimized to MPH ERCT 20 mg/day (42.4 [1.34] vs. 35.1 [2.55]; p = 0.013). Treatment-emergent AEs were reported by 65/90 (72.2%) participants in the dose-optimization period. Dose-optimization period results describing relationships between change in ADHD symptom scores and final optimized MPH ERCT dose will be valuable for clinicians optimizing MPH ERCT dose.
Cheng, Maryanne; Rooney, Rosanna M; Kane, Robert T; Hassan, Sharinaz; Baughman, Natalie
2018-01-01
Parent mental illness and family living arrangement are associated with depression and anxiety in children, and may influence the effects of programs that aim to prevent these disorders. This study investigated whether these family context factors moderated the intervention effects of the enhanced Aussie Optimism Positive Thinking Skills program on depression and anxiety in primary school children. The intervention was a universal, cognitive-behavioral program, with a one hour session each week for 10 weeks, delivered by trained teachers. The participants were 502 children from 13 private schools, aged 9-11, with 347 in the intervention group and 155 in the control group. There were 267 females and 235 males. Data from 502 parents was also included. A cluster randomized controlled trial design was used, including eight intervention schools and five control schools. Depression and anxiety were assessed at pre-test, post-test, and 6-months follow-up. Information on parent mental illness and family living arrangement was collected through a parent questionnaire. The data was analyzed using covariance analysis with Generalized Linear Mixed Methods. At baseline, depressive and anxiety symptoms did not differ significantly based on parent mental illness. Symptoms of depression at baseline were significantly higher for children from a higher-risk family living arrangement, but anxiety symptoms were not. Parent mental illness and family living arrangement did not moderate the effects of the program on depression and anxiety at post-test or 6-months follow-up. Parent mental illness moderated the intervention effects on negative self-esteem, an aspect of depression, at post-test, with improvements seen only for children who did not have a parent with a mental illness. The findings indicate an association between family living arrangement and depressive symptoms in children. The findings suggest that the program is effective for children regardless of parent mental illness or family living arrangement, although parent mental illness has the capacity to influence the program's outcomes.
Post-stroke dysphagia: A review and design considerations for future trials.
Cohen, David L; Roffe, Christine; Beavan, Jessica; Blackett, Brenda; Fairfield, Carol A; Hamdy, Shaheen; Havard, Di; McFarlane, Mary; McLauglin, Carolee; Randall, Mark; Robson, Katie; Scutt, Polly; Smith, Craig; Smithard, David; Sprigg, Nikola; Warusevitane, Anushka; Watkins, Caroline; Woodhouse, Lisa; Bath, Philip M
2016-06-01
Post-stroke dysphagia (a difficulty in swallowing after a stroke) is a common and expensive complication of acute stroke and is associated with increased mortality, morbidity, and institutionalization due in part to aspiration, pneumonia, and malnutrition. Although most patients recover swallowing spontaneously, a significant minority still have dysphagia at six months. Although multiple advances have been made in the hyperacute treatment of stroke and secondary prevention, the management of dysphagia post-stroke remains a neglected area of research, and its optimal management, including diagnosis, investigation and treatment, have still to be defined. © 2016 World Stroke Organization.
Treating post-traumatic tremor with deep brain stimulation: report of five cases.
Issar, Neil M; Hedera, Peter; Phibbs, Fenna T; Konrad, Peter E; Neimat, Joseph S
2013-12-01
Post-traumatic tremor is one of the most common movement disorders resulting from severe head trauma. However, literature regarding successful deep brain stimulation (DBS) treatment is scarce, resulting in ambiguity regarding the optimal lead location. Most cases support the ventral intermediate nucleus, but there is evidence to defend DBS of the zona incerta, ventral oralis anterior/posterior, and/or a combination of these targets. We report five patients with disabling post-traumatic tremor treated with DBS of the ventral intermediate nucleus and of the globus pallidus internus. Patients were referred to the Vanderbilt Movement Disorders Division, and surgical intervention was determined by a DBS Multidisciplinary Committee. Standard DBS procedure was followed. Patients 1-4 sustained severe diffuse axonal injuries. Patients 1-3 underwent unilateral ventral intermediate nucleus DBS for contralateral tremor, while Patient 4 underwent bilateral ventral intermediate nucleus DBS. Patients 1-3 experienced good tremor reduction, while Patient 4 experienced moderate tremor reduction with some dystonic posturing of the hands. Patient 5 had dystonic posturing of the right upper extremity with tremor of the left upper extremity. He was treated with bilateral DBS of the globus pallidus internus and showed good tremor reduction at follow-up. Unilateral or bilateral DBS of the ventral intermediate nucleus and bilateral DBS of the globus pallidus internus may be effective and safe treatment modalities for intractable post-traumatic tremor. Further studies are needed to clarify the optimal target for surgical treatment of post-traumatic tremor. Published by Elsevier Ltd.
Implementation of Complex Signal Processing Algorithms for Position-Sensitive Microcalorimeters
NASA Technical Reports Server (NTRS)
Smith, Stephen J.
2008-01-01
We have recently reported on a theoretical digital signal-processing algorithm for improved energy and position resolution in position-sensitive, transition-edge sensor (POST) X-ray detectors [Smith et al., Nucl, lnstr and Meth. A 556 (2006) 2371. PoST's consists of one or more transition-edge sensors (TES's) on a large continuous or pixellated X-ray absorber and are under development as an alternative to arrays of single pixel TES's. PoST's provide a means to increase the field-of-view for the fewest number of read-out channels. In this contribution we extend the theoretical correlated energy position optimal filter (CEPOF) algorithm (originally developed for 2-TES continuous absorber PoST's) to investigate the practical implementation on multi-pixel single TES PoST's or Hydras. We use numerically simulated data for a nine absorber device, which includes realistic detector noise, to demonstrate an iterative scheme that enables convergence on the correct photon absorption position and energy without any a priori assumptions. The position sensitivity of the CEPOF implemented on simulated data agrees very well with the theoretically predicted resolution. We discuss practical issues such as the impact of random arrival phase of the measured data on the performance of the CEPOF. The CEPOF algorithm demonstrates that full-width-at- half-maximum energy resolution of < 8 eV coupled with position-sensitivity down to a few 100 eV should be achievable for a fully optimized device.
Optimization of perceptual learning: effects of task difficulty and external noise in older adults.
DeLoss, Denton J; Watanabe, Takeo; Andersen, George J
2014-06-01
Previous research has shown a wide array of age-related declines in vision. The current study examined the effects of perceptual learning (PL), external noise, and task difficulty in fine orientation discrimination with older individuals (mean age 71.73, range 65-91). Thirty-two older subjects participated in seven 1.5-h sessions conducted on separate days over a three-week period. A two-alternative forced choice procedure was used in discriminating the orientation of Gabor patches. Four training groups were examined in which the standard orientations for training were either easy or difficult and included either external noise (additive Gaussian noise) or no external noise. In addition, the transfer to an untrained orientation and noise levels were examined. An analysis of the four groups prior to training indicated no significant differences between the groups. An analysis of the change in performance post-training indicated that the degree of learning was related to task difficulty and the presence of external noise during training. In addition, measurements of pupil diameter indicated that changes in orientation discrimination were not associated with changes in retinal illuminance. These results suggest that task difficulty and training in noise are factors important for optimizing the effects of training among older individuals. Copyright © 2013 Elsevier B.V. All rights reserved.
Antibiofilm Effect of DNase against Single and Mixed Species Biofilm
Sharma, Komal
2018-01-01
Biofilms are aggregates of microorganisms that coexist in socially coordinated micro-niche in a self-produced polymeric matrix on pre-conditioned surfaces. The biofilm matrix reduces the efficacy of antibiofilm strategies. DNase degrades the extracellular DNA (e-DNA) present in the matrix, rendering the matrix weak and susceptible to antimicrobials. In the current study, the effect of DNase I was evaluated during biofilm formation (pre-treatment), on preformed biofilms (post-treatment) and both (dual treatment). The DNase I pre-treatment was optimized for P. aeruginosa PAO1 (model biofilm organism) at 10 µg/mL and post-treatment at 10 µg/mL with 15 min of contact duration. Inclusion of Mg2+ alongside DNase I post-treatment resulted in 90% reduction in biofilm within only 5 min of contact time (irrespective of age of biofilm). On extension of these findings, DNase I was found to be less effective against mixed species biofilm than individual biofilms. DNase I can be used as potent antibiofilm agent and with further optimization can be effectively used for biofilm prevention and reduction in situ. PMID:29562719
Assessment of a Cavity to Optimize Ultrasonic Efficiency to Remove Intraradicular Posts.
Graça, Izabela Araujo Aguiar; Sponchiado Júnior, Emílio Carlos; Marques, André Augusto Franco; de Moura Martins, Leandro; Garrido, Ângela Delfina Bittencourt
2017-08-01
The study assessed an in vitro protocol for the removal of cast metal posts using ultrasonic vibration in multirooted teeth by drilling a cavity in the coronal portion of the post followed by ultrasound application in the cavity. Forty endodontically treated molars received intraradicular cast posts and were divided into 4 groups according to the removal protocol: the control group, no cavity and no ultrasonic vibration; the ultrasonic group, no cavity and ultrasonic vibration in the coronal portion of the core; the cavity group, a cavity in the core and no ultrasonic vibration; and the cavity ultrasonic group, a cavity in the core and ultrasonic vibration inside the cavity. The traction test was performed on all samples using a universal testing machine (EMIC DL-2000; EMIC Equipamentos e Sistemas de Ensaio LTDA, São José dos Pinhais, PR, Brazil) at a speed of 1 mm/min, obtaining values in Newtons. The data were statistically analyzed using analysis of variance and the Tukey-Kramer test (P < .05). The results showed statistically significant differences between the tested groups (control group = 322.74 N, ultrasonic group = 283.09 N, cavity group = 244.00 N, and cavity ultrasonic group = 237.69 N). The lowest mean strength was found in the group that received ultrasonic vibration inside the cavity. Preparing a cavity in the coronal core followed by ultrasonic vibration reduces the traction force required for removal. The removal protocol was effective for removing posts in multirooted teeth cemented with zinc phosphate. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.
Development of a Mars Airplane Entry, Descent, and Flight Trajectory
NASA Technical Reports Server (NTRS)
Murray, James E.; Tartabini, Paul V.
2001-01-01
An entry, descent, and flight (EDF) trajectory profile for a Mars airplane mission is defined as consisting of the following elements: ballistic entry of an aeroshell; supersonic deployment of a decelerator parachute; subsonic release of a heat shield; release, unfolding, and orientation of an airplane to flight attitude; and execution of a pull up maneuver to achieve trimmed, horizontal flight. Using the Program to Optimize Simulated Trajectories (POST) a trajectory optimization problem was formulated. Model data representative of a specific Mars airplane configuration, current models of the Mars surface topography and atmosphere, and current estimates of the interplanetary trajectory, were incorporated into the analysis. The goal is to develop an EDF trajectory to maximize the surface-relative altitude of the airplane at the end of a pull up maneuver, while subject to the mission design constraints. The trajectory performance was evaluated for three potential mission sites and was found to be site-sensitive. The trajectory performance, examined for sensitivity to a number of design and constraint variables, was found to be most sensitive to airplane mass, aerodynamic performance characteristics, and the pull up Mach constraint. Based on the results of this sensitivity study, an airplane-drag optimized trajectory was developed that showed a significant performance improvement.
NASA Astrophysics Data System (ADS)
Krawczyk, Rafał D.; Czarski, Tomasz; Kolasiński, Piotr; Linczuk, Paweł; Poźniak, Krzysztof T.; Chernyshova, Maryna; Kasprowicz, Grzegorz; Wojeński, Andrzej; Zabolotny, Wojciech; Zienkiewicz, Paweł
2016-09-01
This article is an overview of what has been implemented in the process of development and testing the GEM detector based acquisition system in terms of post-processing algorithms. Information is given on mex functions for extended statistics collection, unified hex topology and optimized S-DAQ algorithm for splitting overlapped signals. Additional discussion on bottlenecks and major factors concerning optimization is presented.
Sendi, Pedram
2008-06-01
When choosing from a menu of treatment alternatives, the optimal treatment depends on the objective function and the assumptions of the model. The classical decision rule of cost-effectiveness analysis may be formulated via two different objective functions: (i) maximising health outcomes subject to the budget constraint or (ii) maximising the net benefit of the intervention with the budget being determined ex post. We suggest a more general objective function of (iii) maximising return on investment from available resources with consideration of health and non-health investments. The return on investment approach allows to adjust the analysis for the benefits forgone by alternative non-health investments from a societal or subsocietal perspective. We show that in the presence of positive returns on non-health investments the decision-maker's willingness to pay per unit of effect for a treatment program needs to be higher than its incremental cost-effectiveness ratio to be considered cost-effective.
Valente, Mariana; Araújo, Ana; Esteves, Tiago; Laundos, Tiago L; Freire, Ana G; Quelhas, Pedro; Pinto-do-Ó, Perpétua; Nascimento, Diana S
2015-12-02
Cardiac therapies are commonly tested preclinically in small-animal models of myocardial infarction. Following functional evaluation, post-mortem histological analysis is essential to assess morphological and molecular alterations underlying the effectiveness of treatment. However, non-methodical and inadequate sampling of the left ventricle often leads to misinterpretations and variability, making direct study comparisons unreliable. Protocols are provided for representative sampling of the ischemic mouse heart followed by morphometric analysis of the left ventricle. Extending the use of this sampling to other types of in situ analysis is also illustrated through the assessment of neovascularization and cellular engraftment in a cell-based therapy setting. This is of interest to the general cardiovascular research community as it details methods for standardization and simplification of histo-morphometric evaluation of emergent heart therapies. © 2015 by John Wiley & Sons, Inc. Copyright © 2015 John Wiley & Sons, Inc.
SPICE: exploration and analysis of post-cytometric complex multivariate datasets.
Roederer, Mario; Nozzi, Joshua L; Nason, Martha C
2011-02-01
Polychromatic flow cytometry results in complex, multivariate datasets. To date, tools for the aggregate analysis of these datasets across multiple specimens grouped by different categorical variables, such as demographic information, have not been optimized. Often, the exploration of such datasets is accomplished by visualization of patterns with pie charts or bar charts, without easy access to statistical comparisons of measurements that comprise multiple components. Here we report on algorithms and a graphical interface we developed for these purposes. In particular, we discuss thresholding necessary for accurate representation of data in pie charts, the implications for display and comparison of normalized versus unnormalized data, and the effects of averaging when samples with significant background noise are present. Finally, we define a statistic for the nonparametric comparison of complex distributions to test for difference between groups of samples based on multi-component measurements. While originally developed to support the analysis of T cell functional profiles, these techniques are amenable to a broad range of datatypes. Published 2011 Wiley-Liss, Inc.
Assessment of Online Patient Education Materials from Major Dermatologic Associations
John, Ann M.; John, Elizabeth S.; Hansberry, David R.
2016-01-01
Objective: Patients increasingly use the internet to find medical information regarding their conditions and treatments. Physicians often supplement visits with written education materials. Online patient education materials from major dermatologic associations should be written at appropriate reading levels to optimize utility for patients. The purpose of this study is to assess online patient education materials from major dermatologic associations and determine if they are written at the fourth to sixth grade level recommended by the American Medical Association and National Institutes of Health. Design: This is a descriptive and correlational design. Setting: Academic institution. Participants/measurements: Patient education materials from eight major dermatology websites were downloaded and assessed using 10 readability scales. A one-way analysis of variance and Tukey’s Honestly Statistically Different post hoc analysis were performed to determine the difference in readability levels between websites. Results: Two hundred and sixty patient education materials were assessed. Collectively, patient education materials were written at a mean grade level of 11.13, with 65.8 percent of articles written above a tenth grade level and no articles written at the American Medical Association/National Institutes of Health recommended grade levels. Analysis of variance demonstrated a significant difference between websites for each reading scale (p<0.001), which was confirmed with Tukey’s Honestly Statistically Different post hoc analysis. Conclusion: Online patient education materials from major dermatologic association websites are written well above recommended reading levels. Associations should consider revising patient education materials to allow more effective patient comprehension. (J ClinAesthet Dermatol. 2016;9(9):23–28.) PMID:27878059
Assessment of Online Patient Education Materials from Major Dermatologic Associations.
John, Ann M; John, Elizabeth S; Hansberry, David R; Lambert, William Clark
2016-09-01
Objective: Patients increasingly use the internet to find medical information regarding their conditions and treatments. Physicians often supplement visits with written education materials. Online patient education materials from major dermatologic associations should be written at appropriate reading levels to optimize utility for patients. The purpose of this study is to assess online patient education materials from major dermatologic associations and determine if they are written at the fourth to sixth grade level recommended by the American Medical Association and National Institutes of Health. Design: This is a descriptive and correlational design. Setting: Academic institution. Participants/measurements: Patient education materials from eight major dermatology websites were downloaded and assessed using 10 readability scales. A one-way analysis of variance and Tukey's Honestly Statistically Different post hoc analysis were performed to determine the difference in readability levels between websites. Results: Two hundred and sixty patient education materials were assessed. Collectively, patient education materials were written at a mean grade level of 11.13, with 65.8 percent of articles written above a tenth grade level and no articles written at the American Medical Association/National Institutes of Health recommended grade levels. Analysis of variance demonstrated a significant difference between websites for each reading scale (p<0.001), which was confirmed with Tukey's Honestly Statistically Different post hoc analysis. Conclusion: Online patient education materials from major dermatologic association websites are written well above recommended reading levels. Associations should consider revising patient education materials to allow more effective patient comprehension. (J ClinAesthet Dermatol. 2016;9(9):23-28.).
Chen, Jin-Qiu; Wakefield, Lalage M; Goldstein, David J
2015-06-06
There is an emerging demand for the use of molecular profiling to facilitate biomarker identification and development, and to stratify patients for more efficient treatment decisions with reduced adverse effects. In the past decade, great strides have been made to advance genomic, transcriptomic and proteomic approaches to address these demands. While there has been much progress with these large scale approaches, profiling at the protein level still faces challenges due to limitations in clinical sample size, poor reproducibility, unreliable quantitation, and lack of assay robustness. A novel automated capillary nano-immunoassay (CNIA) technology has been developed. This technology offers precise and accurate measurement of proteins and their post-translational modifications using either charge-based or size-based separation formats. The system not only uses ultralow nanogram levels of protein but also allows multi-analyte analysis using a parallel single-analyte format for increased sensitivity and specificity. The high sensitivity and excellent reproducibility of this technology make it particularly powerful for analysis of clinical samples. Furthermore, the system can distinguish and detect specific protein post-translational modifications that conventional Western blot and other immunoassays cannot easily capture. This review will summarize and evaluate the latest progress to optimize the CNIA system for comprehensive, quantitative protein and signaling event characterization. It will also discuss how the technology has been successfully applied in both discovery research and clinical studies, for signaling pathway dissection, proteomic biomarker assessment, targeted treatment evaluation and quantitative proteomic analysis. Lastly, a comparison of this novel system with other conventional immuno-assay platforms is performed.
Scott, John W; Nyinawankusi, Jeanne D'Arc; Enumah, Samuel; Maine, Rebecca; Uwitonze, Eric; Hu, Yihan; Kabagema, Ignace; Byiringiro, Jean Claude; Riviello, Robert; Jayaraman, Sudha
2017-07-01
Injury is a major cause of premature death and disability in East Africa, and high-quality pre-hospital care is essential for optimal trauma outcomes. The Rwandan pre-hospital emergency care service (SAMU) uses an electronic database to evaluate and optimize pre-hospital care through a continuous quality improvement programme (CQIP), beginning March 2014. The SAMU database was used to assess pre-hospital quality metrics including supplementary oxygen for hypoxia (O2), intravenous fluids for hypotension (IVF), cervical collar placement for head injuries (c-collar), and either splinting (splint) or administration of pain medications (pain) for long bone fractures. Targets of >90% were set for each metric and daily team meetings and monthly feedback sessions were implemented to address opportunities for improvement. These five pre-hospital quality metrics were assessed monthly before and after implementation of the CQIP. Met and unmet needs for O2, IVF, and c-collar were combined into a summative monthly SAMU Trauma Quality Scores (STQ score). An interrupted time series linear regression model compared the STQ score during 14 months before the CQIP implementation to the first 14 months after. During the 29-month study period 3,822 patients met study criteria. 1,028 patients needed one or more of the five studied interventions during the study period. All five endpoints had a significant increase between the pre-CQI and post-CQI periods (p<0.05 for all), and all five achieved a post-CQI average of at least 90% completion. The monthly composite STQ scores ranged from 76.5 to 97.9 pre-CQI, but tightened to 86.1-98.7 during the post-CQI period. Interrupted time series analysis of the STQ score showed that CQI programme led to both an immediate improvement of +6.1% (p=0.017) and sustained monthly improvements in care delivery-improving at a rate of 0.7% per month (p=0.028). The SAMU experience demonstrates the utility of a responsive, data-driven quality improvement programme to yield significant immediate and sustained improvements in pre-hospital care for trauma in Rwanda. This programme may be used as an example for additional efforts engaging frontline staff with real-time data feedback in order to rapidly translate data collection efforts into improved care for the injured in a resource-limited setting. Copyright © 2017 Elsevier Ltd. All rights reserved.
Nine, seven, five, or three: how many figures do we need for assessing body image?
Ambrosi-Randić, Neala; Pokrajac-Bulian, Alessandra; Taksić, Vladimir
2005-04-01
320 Croatian female students (M=20.4 yr.) were recruited to examine the validity and reliability of figural scales using different numbers of stimuli (3, 5, 7, and 9) and different serial presentation (serial and nonserial order). A two-way analysis of variance (4 numbers x 2 orders of stimuli) was performed on ratings of current self-size and ideal size as dependent variables. Analysis indicated a significant main effect of number of stimuli. This, together with post hoc tests indicated that ratings were significantly different for a scale of three figures from scales of more figures, which in turn did not differ among themselves. Main effects of order of stimuli, as well as the interaction, were not significant. The results support the hypothesis that the optimal number of figures on a scale is seven plus (or minus) two.
Use of randomized sampling for analysis of metabolic networks.
Schellenberger, Jan; Palsson, Bernhard Ø
2009-02-27
Genome-scale metabolic network reconstructions in microorganisms have been formulated and studied for about 8 years. The constraint-based approach has shown great promise in analyzing the systemic properties of these network reconstructions. Notably, constraint-based models have been used successfully to predict the phenotypic effects of knock-outs and for metabolic engineering. The inherent uncertainty in both parameters and variables of large-scale models is significant and is well suited to study by Monte Carlo sampling of the solution space. These techniques have been applied extensively to the reaction rate (flux) space of networks, with more recent work focusing on dynamic/kinetic properties. Monte Carlo sampling as an analysis tool has many advantages, including the ability to work with missing data, the ability to apply post-processing techniques, and the ability to quantify uncertainty and to optimize experiments to reduce uncertainty. We present an overview of this emerging area of research in systems biology.
On the release of cppxfel for processing X-ray free-electron laser images.
Ginn, Helen Mary; Evans, Gwyndaf; Sauter, Nicholas K; Stuart, David Ian
2016-06-01
As serial femtosecond crystallography expands towards a variety of delivery methods, including chip-based methods, and smaller collected data sets, the requirement to optimize the data analysis to produce maximum structure quality is becoming increasingly pressing. Here cppxfel , a software package primarily written in C++, which showcases several data analysis techniques, is released. This software package presently indexes images using DIALS (diffraction integration for advanced light sources) and performs an initial orientation matrix refinement, followed by post-refinement of individual images against a reference data set. Cppxfel is released with the hope that the unique and useful elements of this package can be repurposed for existing software packages. However, as released, it produces high-quality crystal structures and is therefore likely to be also useful to experienced users of X-ray free-electron laser (XFEL) software who wish to maximize the information extracted from a limited number of XFEL images.
Modifying high-order aeroelastic math model of a jet transport using maximum likelihood estimation
NASA Technical Reports Server (NTRS)
Anissipour, Amir A.; Benson, Russell A.
1989-01-01
The design of control laws to damp flexible structural modes requires accurate math models. Unlike the design of control laws for rigid body motion (e.g., where robust control is used to compensate for modeling inaccuracies), structural mode damping usually employs narrow band notch filters. In order to obtain the required accuracy in the math model, maximum likelihood estimation technique is employed to improve the accuracy of the math model using flight data. Presented here are all phases of this methodology: (1) pre-flight analysis (i.e., optimal input signal design for flight test, sensor location determination, model reduction technique, etc.), (2) data collection and preprocessing, and (3) post-flight analysis (i.e., estimation technique and model verification). In addition, a discussion is presented of the software tools used and the need for future study in this field.
NASA Astrophysics Data System (ADS)
Wang, Weijie; Lu, Yanmin
2018-03-01
Most existing Collaborative Filtering (CF) algorithms predict a rating as the preference of an active user toward a given item, which is always a decimal fraction. Meanwhile, the actual ratings in most data sets are integers. In this paper, we discuss and demonstrate why rounding can bring different influences to these two metrics; prove that rounding is necessary in post-processing of the predicted ratings, eliminate of model prediction bias, improving the accuracy of the prediction. In addition, we also propose two new rounding approaches based on the predicted rating probability distribution, which can be used to round the predicted rating to an optimal integer rating, and get better prediction accuracy compared to the Basic Rounding approach. Extensive experiments on different data sets validate the correctness of our analysis and the effectiveness of our proposed rounding approaches.
On the release of cppxfel for processing X-ray free-electron laser images
Ginn, Helen Mary; Evans, Gwyndaf; Sauter, Nicholas K.; ...
2016-05-11
As serial femtosecond crystallography expands towards a variety of delivery methods, including chip-based methods, and smaller collected data sets, the requirement to optimize the data analysis to produce maximum structure quality is becoming increasingly pressing. Herecppxfel, a software package primarily written in C++, which showcases several data analysis techniques, is released. This software package presently indexes images using DIALS (diffraction integration for advanced light sources) and performs an initial orientation matrix refinement, followed by post-refinement of individual images against a reference data set.Cppxfelis released with the hope that the unique and useful elements of this package can be repurposed formore » existing software packages. However, as released, it produces high-quality crystal structures and is therefore likely to be also useful to experienced users of X-ray free-electron laser (XFEL) software who wish to maximize the information extracted from a limited number of XFEL images.« less
Trautz, Florian; Dreßler, Jan; Stassart, Ruth; Müller, Wolf; Ondruschka, Benjamin
2018-01-03
Immunohistochemistry (IHC) has become an integral part in forensic histopathology over the last decades. However, the underlying methods for IHC vary greatly depending on the institution, creating a lack of comparability. The aim of this study was to assess the optimal approach for different technical aspects of IHC, in order to improve and standardize this procedure. Therefore, qualitative results from manual and automatic IHC staining of brain samples were compared, as well as potential differences in suitability of common IHC glass slides. Further, possibilities of image digitalization and connected issues were investigated. In our study, automatic staining showed more consistent staining results, compared to manual staining procedures. Digitalization and digital post-processing facilitated direct analysis and analysis for reproducibility considerably. No differences were found for different commercially available microscopic glass slides regarding suitability of IHC brain researches, but a certain rate of tissue loss should be expected during the staining process.
Exergy analysis of a solid oxide fuel cell micropowerplant
NASA Astrophysics Data System (ADS)
Hotz, Nico; Senn, Stephan M.; Poulikakos, Dimos
In this paper, an analytical model of a micro solid oxide fuel cell (SOFC) system fed by butane is introduced and analyzed in order to optimize its exergetic efficiency. The micro SOFC system is equipped with a partial oxidation (POX) reformer, a vaporizer, two pre-heaters, and a post-combustor. A one-dimensional (1D) polarization model of the SOFC is used to examine the effects of concentration overpotentials, activation overpotentials, and ohmic resistances on cell performance. This 1D polarization model is extended in this study to a two-dimensional (2D) fuel cell model considering convective mass and heat transport along the fuel cell channel and from the fuel cell to the environment. The influence of significant operational parameters on the exergetic efficiency of the micro SOFC system is discussed. The present study shows the importance of an exergy analysis of the fuel cell as part of an entire thermodynamic system (transportable micropowerplant) generating electric power.
FY17 Status Report on NEAMS Neutronics Activities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lee, C. H.; Jung, Y. S.; Smith, M. A.
2017-09-30
Under the U.S. DOE NEAMS program, the high-fidelity neutronics code system has been developed to support the multiphysics modeling and simulation capability named SHARP. The neutronics code system includes the high-fidelity neutronics code PROTEUS, the cross section library and preprocessing tools, the multigroup cross section generation code MC2-3, the in-house meshing generation tool, the perturbation and sensitivity analysis code PERSENT, and post-processing tools. The main objectives of the NEAMS neutronics activities in FY17 are to continue development of an advanced nodal solver in PROTEUS for use in nuclear reactor design and analysis projects, implement a simplified sub-channel based thermal-hydraulic (T/H)more » capability into PROTEUS to efficiently compute the thermal feedback, improve the performance of PROTEUS-MOCEX using numerical acceleration and code optimization, improve the cross section generation tools including MC2-3, and continue to perform verification and validation tests for PROTEUS.« less
Karakatsanis, Nicolas A.; Casey, Michael E.; Lodge, Martin A.; Rahmim, Arman; Zaidi, Habib
2016-01-01
Whole-body (WB) dynamic PET has recently demonstrated its potential in translating the quantitative benefits of parametric imaging to the clinic. Post-reconstruction standard Patlak (sPatlak) WB graphical analysis utilizes multi-bed multi-pass PET acquisition to produce quantitative WB images of the tracer influx rate Ki as a complimentary metric to the semi-quantitative standardized uptake value (SUV). The resulting Ki images may suffer from high noise due to the need for short acquisition frames. Meanwhile, a generalized Patlak (gPatlak) WB post-reconstruction method had been suggested to limit Ki bias of sPatlak analysis at regions with non-negligible 18F-FDG uptake reversibility; however, gPatlak analysis is non-linear and thus can further amplify noise. In the present study, we implemented, within the open-source Software for Tomographic Image Reconstruction (STIR) platform, a clinically adoptable 4D WB reconstruction framework enabling efficient estimation of sPatlak and gPatlak images directly from dynamic multi-bed PET raw data with substantial noise reduction. Furthermore, we employed the optimization transfer methodology to accelerate 4D expectation-maximization (EM) convergence by nesting the fast image-based estimation of Patlak parameters within each iteration cycle of the slower projection-based estimation of dynamic PET images. The novel gPatlak 4D method was initialized from an optimized set of sPatlak ML-EM iterations to facilitate EM convergence. Initially, realistic simulations were conducted utilizing published 18F-FDG kinetic parameters coupled with the XCAT phantom. Quantitative analyses illustrated enhanced Ki target-to-background ratio (TBR) and especially contrast-to-noise ratio (CNR) performance for the 4D vs. the indirect methods and static SUV. Furthermore, considerable convergence acceleration was observed for the nested algorithms involving 10–20 sub-iterations. Moreover, systematic reduction in Ki % bias and improved TBR were observed for gPatlak vs. sPatlak. Finally, validation on clinical WB dynamic data demonstrated the clinical feasibility and superior Ki CNR performance for the proposed 4D framework compared to indirect Patlak and SUV imaging. PMID:27383991
NASA Astrophysics Data System (ADS)
Karakatsanis, Nicolas A.; Casey, Michael E.; Lodge, Martin A.; Rahmim, Arman; Zaidi, Habib
2016-08-01
Whole-body (WB) dynamic PET has recently demonstrated its potential in translating the quantitative benefits of parametric imaging to the clinic. Post-reconstruction standard Patlak (sPatlak) WB graphical analysis utilizes multi-bed multi-pass PET acquisition to produce quantitative WB images of the tracer influx rate K i as a complimentary metric to the semi-quantitative standardized uptake value (SUV). The resulting K i images may suffer from high noise due to the need for short acquisition frames. Meanwhile, a generalized Patlak (gPatlak) WB post-reconstruction method had been suggested to limit K i bias of sPatlak analysis at regions with non-negligible 18F-FDG uptake reversibility; however, gPatlak analysis is non-linear and thus can further amplify noise. In the present study, we implemented, within the open-source software for tomographic image reconstruction platform, a clinically adoptable 4D WB reconstruction framework enabling efficient estimation of sPatlak and gPatlak images directly from dynamic multi-bed PET raw data with substantial noise reduction. Furthermore, we employed the optimization transfer methodology to accelerate 4D expectation-maximization (EM) convergence by nesting the fast image-based estimation of Patlak parameters within each iteration cycle of the slower projection-based estimation of dynamic PET images. The novel gPatlak 4D method was initialized from an optimized set of sPatlak ML-EM iterations to facilitate EM convergence. Initially, realistic simulations were conducted utilizing published 18F-FDG kinetic parameters coupled with the XCAT phantom. Quantitative analyses illustrated enhanced K i target-to-background ratio (TBR) and especially contrast-to-noise ratio (CNR) performance for the 4D versus the indirect methods and static SUV. Furthermore, considerable convergence acceleration was observed for the nested algorithms involving 10-20 sub-iterations. Moreover, systematic reduction in K i % bias and improved TBR were observed for gPatlak versus sPatlak. Finally, validation on clinical WB dynamic data demonstrated the clinical feasibility and superior K i CNR performance for the proposed 4D framework compared to indirect Patlak and SUV imaging.
Truss systems and shape optimization
NASA Astrophysics Data System (ADS)
Pricop, Mihai Victor; Bunea, Marian; Nedelcu, Roxana
2017-07-01
Structure optimization is an important topic because of its benefits and wide applicability range, from civil engineering to aerospace and automotive industries, contributing to a more green industry and life. Truss finite elements are still in use in many research/industrial codesfor their simple stiffness matrixand are naturally matching the requirements for cellular materials especially considering various 3D printing technologies. Optimality Criteria combined with Solid Isotropic Material with Penalization is the optimization method of choice, particularized for truss systems. Global locked structures areobtainedusinglocally locked lattice local organization, corresponding to structured or unstructured meshes. Post processing is important for downstream application of the method, to make a faster link to the CAD systems. To export the optimal structure in CATIA, a CATScript file is automatically generated. Results, findings and conclusions are given for two and three-dimensional cases.
Post Pareto optimization-A case
NASA Astrophysics Data System (ADS)
Popov, Stoyan; Baeva, Silvia; Marinova, Daniela
2017-12-01
Simulation performance may be evaluated according to multiple quality measures that are in competition and their simultaneous consideration poses a conflict. In the current study we propose a practical framework for investigating such simulation performance criteria, exploring the inherent conflicts amongst them and identifying the best available tradeoffs, based upon multi-objective Pareto optimization. This approach necessitates the rigorous derivation of performance criteria to serve as objective functions and undergo vector optimization. We demonstrate the effectiveness of our proposed approach by applying it with multiple stochastic quality measures. We formulate performance criteria of this use-case, pose an optimization problem, and solve it by means of a simulation-based Pareto approach. Upon attainment of the underlying Pareto Frontier, we analyze it and prescribe preference-dependent configurations for the optimal simulation training.
Improvement of Automated POST Case Success Rate Using Support Vector Machines
NASA Technical Reports Server (NTRS)
Zwack, Matthew R.; Dees, Patrick D.
2017-01-01
During early conceptual design of complex systems, concept down selection can have a large impact upon program life-cycle cost. Therefore, any concepts selected during early design will inherently commit program costs and affect the overall probability of program success. For this reason it is important to consider as large a design space as possible in order to better inform the down selection process. For conceptual design of launch vehicles, trajectory analysis and optimization often presents the largest obstacle to evaluating large trade spaces. This is due to the sensitivity of the trajectory discipline to changes in all other aspects of the vehicle design. Small deltas in the performance of other subsystems can result in relatively large fluctuations in the ascent trajectory because the solution space is non-linear and multi-modal [1]. In order to help capture large design spaces for new launch vehicles, the authors have performed previous work seeking to automate the execution of the industry standard tool, Program to Optimize Simulated Trajectories (POST). This work initially focused on implementation of analyst heuristics to enable closure of cases in an automated fashion, with the goal of applying the concepts of design of experiments (DOE) and surrogate modeling to enable near instantaneous throughput of vehicle cases [2]. Additional work was then completed to improve the DOE process by utilizing a graph theory based approach to connect similar design points [3]. The conclusion of the previous work illustrated the utility of the graph theory approach for completing a DOE through POST. However, this approach was still dependent upon the use of random repetitions to generate seed points for the graph. As noted in [3], only 8% of these random repetitions resulted in converged trajectories. This ultimately affects the ability of the random reps method to confidently approach the global optima for a given vehicle case in a reasonable amount of time. With only an 8% pass rate, tens or hundreds of thousands of reps may be needed to be confident that the best repetition is at least close to the global optima. However, typical design study time constraints require that fewer repetitions be attempted, sometimes resulting in seed points that have only a handful of successful completions. If a small number of successful repetitions are used to generate a seed point, the graph method may inherit some inaccuracies as it chains DOE cases from the non-global-optimal seed points. This creates inherent noise in the graph data, which can limit the accuracy of the resulting surrogate models. For this reason, the goal of this work is to improve the seed point generation method and ultimately the accuracy of the resulting POST surrogate model. The work focuses on increasing the case pass rate for seed point generation.
EOQ model for perishable products with price-dependent demand, pre and post discounted selling price
NASA Astrophysics Data System (ADS)
Santhi, G.; Karthikeyan, K.
2017-11-01
In this article we introduce an economic order quantity model for perishable products like vegetables, fruits, milk, flowers, meat, etc.,with price-dependent demand, pre and post discounted selling price. Here we consider the demand is depending on selling price and deterioration rate is constant. Here we developed mathematical model to determine optimal discounton the unit selling price to maximize total profit. Numerical examples are given for illustrated.
Shape optimization of tibial prosthesis components
NASA Technical Reports Server (NTRS)
Saravanos, D. A.; Mraz, P. J.; Davy, D. T.
1993-01-01
NASA technology and optimal design methodologies originally developed for the optimization of composite structures (engine blades) are adapted and applied to the optimization of orthopaedic knee implants. A method is developed enabling the shape tailoring of the tibial components of a total knee replacement implant for optimal interaction within the environment of the tibia. The shape of the implant components are optimized such that the stresses in the bone are favorably controlled to minimize bone degradation, to improve the mechanical integrity of the implant/interface/bone system, and to prevent failures of the implant components. A pilot tailoring system is developed and the feasibility of the concept is demonstrated and evaluated. The methodology and evolution of the existing aerospace technology from which this pilot optimization code was developed is also presented and discussed. Both symmetric and unsymmetric in-plane loading conditions are investigated. The results of the optimization process indicate a trend toward wider and tapered posts as well as thicker backing trays. Unique component geometries were obtained for the different load cases.
Vaas, Lea A I; Sikorski, Johannes; Michael, Victoria; Göker, Markus; Klenk, Hans-Peter
2012-01-01
The Phenotype MicroArray (OmniLog® PM) system is able to simultaneously capture a large number of phenotypes by recording an organism's respiration over time on distinct substrates. This technique targets the object of natural selection itself, the phenotype, whereas previously addressed '-omics' techniques merely study components that finally contribute to it. The recording of respiration over time, however, adds a longitudinal dimension to the data. To optimally exploit this information, it must be extracted from the shapes of the recorded curves and displayed in analogy to conventional growth curves. The free software environment R was explored for both visualizing and fitting of PM respiration curves. Approaches using either a model fit (and commonly applied growth models) or a smoothing spline were evaluated. Their reliability in inferring curve parameters and confidence intervals was compared to the native OmniLog® PM analysis software. We consider the post-processing of the estimated parameters, the optimal classification of curve shapes and the detection of significant differences between them, as well as practically relevant questions such as detecting the impact of cultivation times and the minimum required number of experimental repeats. We provide a comprehensive framework for data visualization and parameter estimation according to user choices. A flexible graphical representation strategy for displaying the results is proposed, including 95% confidence intervals for the estimated parameters. The spline approach is less prone to irregular curve shapes than fitting any of the considered models or using the native PM software for calculating both point estimates and confidence intervals. These can serve as a starting point for the automated post-processing of PM data, providing much more information than the strict dichotomization into positive and negative reactions. Our results form the basis for a freely available R package for the analysis of PM data.
Vaas, Lea A. I.; Sikorski, Johannes; Michael, Victoria; Göker, Markus; Klenk, Hans-Peter
2012-01-01
Background The Phenotype MicroArray (OmniLog® PM) system is able to simultaneously capture a large number of phenotypes by recording an organism's respiration over time on distinct substrates. This technique targets the object of natural selection itself, the phenotype, whereas previously addressed ‘-omics’ techniques merely study components that finally contribute to it. The recording of respiration over time, however, adds a longitudinal dimension to the data. To optimally exploit this information, it must be extracted from the shapes of the recorded curves and displayed in analogy to conventional growth curves. Methodology The free software environment R was explored for both visualizing and fitting of PM respiration curves. Approaches using either a model fit (and commonly applied growth models) or a smoothing spline were evaluated. Their reliability in inferring curve parameters and confidence intervals was compared to the native OmniLog® PM analysis software. We consider the post-processing of the estimated parameters, the optimal classification of curve shapes and the detection of significant differences between them, as well as practically relevant questions such as detecting the impact of cultivation times and the minimum required number of experimental repeats. Conclusions We provide a comprehensive framework for data visualization and parameter estimation according to user choices. A flexible graphical representation strategy for displaying the results is proposed, including 95% confidence intervals for the estimated parameters. The spline approach is less prone to irregular curve shapes than fitting any of the considered models or using the native PM software for calculating both point estimates and confidence intervals. These can serve as a starting point for the automated post-processing of PM data, providing much more information than the strict dichotomization into positive and negative reactions. Our results form the basis for a freely available R package for the analysis of PM data. PMID:22536335
Narula, Neeraj; Marshall, John K; Colombel, Jean-Frederic; Leontiadis, Grigorios I; Williams, John G; Muqtadir, Zack; Reinisch, Walter
2016-04-01
Acute severe steroid-refractory ulcerative colitis (UC) carries a poor prognosis and requires optimal management. A systematic review and meta-analysis were conducted to assess cyclosporine and infliximab (IFX) as rescue agents in patients with steroid-refractory UC. A literature search identified studies that investigated IFX and cyclosporine in steroid-refractory UC patients. The primary outcome was short-term response to treatment. Secondary outcomes included the rates of colectomy at 3 months and 12 months, adverse drug reactions, post-operative complications in those who received rescue therapy but underwent colectomy subsequently, and mortality. Odds ratios (ORs) with 95% confidence intervals (CIs) are reported. Overall, 16 studies with 1,473 participants were eligible for inclusion. Among three randomized controlled trials, no significant difference was seen with IFX compared with cyclosporine with regard to treatment response and 3- or 12-month colectomy. Among 13 non-randomized studies, IFX was associated with significantly higher rates of treatment response (OR 2.96 (95% CI 2.12-4.14, χ(2)=6.50, I(2)=0%)) and a lower 12-month colectomy rate (OR 0.42 (95% CI 0.22-0.83, χ(2)=30.94, I(2)=71%)), with no significant difference seen in the 3-month colectomy rate (OR 0.53 (95% CI 0.22-1.28, χ(2)=22.73, I(2)=69%)) compared with cyclosporine. There were no significant differences between IFX and cyclosporine in adverse drug-related events, post-operative complications, or mortality. In the management of steroid-refractory severe UC, no definitive difference between IFX and cyclosporine is demonstrated by randomized trials, but non-randomized studies suggest that IFX is associated with better treatment response and lower risk of colectomy at 12 months. Prospective studies comparing dose-optimized IFX with cyclosporine are needed.
Godman, Brian; Malmström, Rickard E; Diogene, Eduardo; Jayathissa, Sisira; McTaggart, Stuart; Cars, Thomas; Alvarez-Madrazo, Samantha; Baumgärtel, Christoph; Brzezinska, Anna; Bucsics, Anna; Campbell, Stephen; Eriksson, Irene; Finlayson, Alexander; Fürst, Jurij; Garuoliene, Kristina; Gutiérrez-Ibarluzea, Iñaki; Hviding, Krystyna; Herholz, Harald; Joppi, Roberta; Kalaba, Marija; Laius, Ott; Malinowska, Kamila; Pedersen, Hanne B; Markovic-Pekovic, Vanda; Piessnegger, Jutta; Selke, Gisbert; Sermet, Catherine; Spillane, Susan; Tomek, Dominik; Vončina, Luka; Vlahović-Palčevski, Vera; Wale, Janet; Wladysiuk, Magdalena; van Woerkom, Menno; Zara, Corinne; Gustafsson, Lars L
2014-01-01
There are potential conflicts between authorities and companies to fund new premium priced drugs especially where there are effectiveness, safety and/or budget concerns. Dabigatran, a new oral anticoagulant for the prevention of stroke in patients with non-valvular atrial fibrillation (AF), exemplifies this issue. Whilst new effective treatments are needed, there are issues in the elderly with dabigatran due to variable drug concentrations, no known antidote and dependence on renal elimination. Published studies showed dabigatran to be cost-effective but there are budget concerns given the prevalence of AF. These concerns resulted in extensive activities pre- to post-launch to manage its introduction. To (i) review authority activities across countries, (ii) use the findings to develop new models to better manage the entry of new drugs, and (iii) review the implications based on post-launch activities. (i) Descriptive review and appraisal of activities regarding dabigatran, (ii) development of guidance for key stakeholder groups through an iterative process, (iii) refining guidance following post launch studies. Plethora of activities to manage dabigatran including extensive pre-launch activities, risk sharing arrangements, prescribing restrictions and monitoring of prescribing post launch. Reimbursement has been denied in some countries due to concerns with its budget impact and/or excessive bleeding. Development of a new model and future guidance is proposed to better manage the entry of new drugs, centering on three pillars of pre-, peri-, and post-launch activities. Post-launch activities include increasing use of patient registries to monitor the safety and effectiveness of new drugs in clinical practice. Models for introducing new drugs are essential to optimize their prescribing especially where concerns. Without such models, new drugs may be withdrawn prematurely and/or struggle for funding.
Godman, Brian; Malmström, Rickard E.; Diogene, Eduardo; Jayathissa, Sisira; McTaggart, Stuart; Cars, Thomas; Alvarez-Madrazo, Samantha; Baumgärtel, Christoph; Brzezinska, Anna; Bucsics, Anna; Campbell, Stephen; Eriksson, Irene; Finlayson, Alexander; Fürst, Jurij; Garuoliene, Kristina; Gutiérrez-Ibarluzea, Iñaki; Hviding, Krystyna; Herholz, Harald; Joppi, Roberta; Kalaba, Marija; Laius, Ott; Malinowska, Kamila; Pedersen, Hanne B.; Markovic-Pekovic, Vanda; Piessnegger, Jutta; Selke, Gisbert; Sermet, Catherine; Spillane, Susan; Tomek, Dominik; Vončina, Luka; Vlahović-Palčevski, Vera; Wale, Janet; Wladysiuk, Magdalena; van Woerkom, Menno; Zara, Corinne; Gustafsson, Lars L.
2014-01-01
Background: There are potential conflicts between authorities and companies to fund new premium priced drugs especially where there are effectiveness, safety and/or budget concerns. Dabigatran, a new oral anticoagulant for the prevention of stroke in patients with non-valvular atrial fibrillation (AF), exemplifies this issue. Whilst new effective treatments are needed, there are issues in the elderly with dabigatran due to variable drug concentrations, no known antidote and dependence on renal elimination. Published studies showed dabigatran to be cost-effective but there are budget concerns given the prevalence of AF. These concerns resulted in extensive activities pre- to post-launch to manage its introduction. Objective: To (i) review authority activities across countries, (ii) use the findings to develop new models to better manage the entry of new drugs, and (iii) review the implications based on post-launch activities. Methodology: (i) Descriptive review and appraisal of activities regarding dabigatran, (ii) development of guidance for key stakeholder groups through an iterative process, (iii) refining guidance following post launch studies. Results: Plethora of activities to manage dabigatran including extensive pre-launch activities, risk sharing arrangements, prescribing restrictions and monitoring of prescribing post launch. Reimbursement has been denied in some countries due to concerns with its budget impact and/or excessive bleeding. Development of a new model and future guidance is proposed to better manage the entry of new drugs, centering on three pillars of pre-, peri-, and post-launch activities. Post-launch activities include increasing use of patient registries to monitor the safety and effectiveness of new drugs in clinical practice. Conclusion: Models for introducing new drugs are essential to optimize their prescribing especially where concerns. Without such models, new drugs may be withdrawn prematurely and/or struggle for funding. PMID:24959145
Network-based modeling and intelligent data mining of social media for improving care.
Akay, Altug; Dragomir, Andrei; Erlandsson, Bjorn-Erik
2015-01-01
Intelligently extracting knowledge from social media has recently attracted great interest from the Biomedical and Health Informatics community to simultaneously improve healthcare outcomes and reduce costs using consumer-generated opinion. We propose a two-step analysis framework that focuses on positive and negative sentiment, as well as the side effects of treatment, in users' forum posts, and identifies user communities (modules) and influential users for the purpose of ascertaining user opinion of cancer treatment. We used a self-organizing map to analyze word frequency data derived from users' forum posts. We then introduced a novel network-based approach for modeling users' forum interactions and employed a network partitioning method based on optimizing a stability quality measure. This allowed us to determine consumer opinion and identify influential users within the retrieved modules using information derived from both word-frequency data and network-based properties. Our approach can expand research into intelligently mining social media data for consumer opinion of various treatments to provide rapid, up-to-date information for the pharmaceutical industry, hospitals, and medical staff, on the effectiveness (or ineffectiveness) of future treatments.
Large-scale prediction of ADAR-mediated effective human A-to-I RNA editing.
Yao, Li; Wang, Heming; Song, Yuanyuan; Dai, Zhen; Yu, Hao; Yin, Ming; Wang, Dongxu; Yang, Xin; Wang, Jinlin; Wang, Tiedong; Cao, Nan; Zhu, Jimin; Shen, Xizhong; Song, Guangqi; Zhao, Yicheng
2017-08-10
Adenosine-to-inosine (A-to-I) editing by adenosine deaminase acting on the RNA (ADAR) proteins is one of the most frequent modifications during post- and co-transcription. To facilitate the assignment of biological functions to specific editing sites, we designed an automatic online platform to annotate A-to-I RNA editing sites in pre-mRNA splicing signals, microRNAs (miRNAs) and miRNA target untranslated regions (3' UTRs) from human (Homo sapiens) high-throughput sequencing data and predict their effects based on large-scale bioinformatic analysis. After analysing plenty of previously reported RNA editing events and human normal tissues RNA high-seq data, >60 000 potentially effective RNA editing events on functional genes were found. The RNA Editing Plus platform is available for free at https://www.rnaeditplus.org/, and we believe our platform governing multiple optimized methods will improve further studies of A-to-I-induced editing post-transcriptional regulation. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
NASA Technical Reports Server (NTRS)
James, R.; Brownlow, J. D.
1985-01-01
A study is performed under NASA contract to evaluate data from an AN/FPS-16 radar installed for support of flight programs at Dryden Flight Research Facility of NASA Ames Research Center. The purpose of this study is to provide information necessary for improving post-flight data reduction and knowledge of accuracy of derived radar quantities. Tracking data from six flights are analyzed. Noise and bias errors in raw tracking data are determined for each of the flights. A discussion of an altitude bias error during all of the tracking missions is included. This bias error is defined by utilizing pressure altitude measurements made during survey flights. Four separate filtering methods, representative of the most widely used optimal estimation techniques for enhancement of radar tracking data, are analyzed for suitability in processing both real-time and post-mission data. Additional information regarding the radar and its measurements, including typical noise and bias errors in the range and angle measurements, is also presented. This report is in two parts. This is part 2, a discussion of the modeling of propagation path errors.
Wide angle reflection effects on the uncertainty in layered models travel times tomography
NASA Astrophysics Data System (ADS)
Majdanski, Mariusz; Bialas, Sebastian; Trzeciak, Maciej; Gaczyński, Edward; Maksym, Andrzej
2015-04-01
Multi-phase layered model traveltimes tomography inversions can be realised in several ways depending on the inversion path. Inverting the shape of the boundaries based on reflection data and the velocity field based on refractions could be done jointly or sequentially. We analyse an optimal inversion path based on the uncertainty analysis of the final models. Additionally, we propose to use post critical wide-angle reflections in tomographic inversions for more reliable results especially in the deeper parts of each layer. We focus on the effects of using hard to pick post critical reflections on the final model uncertainty. Our study is performed using data collected during standard vibroseis and explosive sources seismic reflection experiment focused on shale gas reservoir characterisation realised by Polish Oil and Gas Company. Our data were gathered by a standalone single component stations deployed along the whole length of the 20 km long profile, resulting in significantly longer offsets. Our piggy back recordings resulted in good quality wide angle refraction and reflection recordings clearly observable up to the offsets of 12 km.
Sumitani, Daisuke; Egi, Hiroyuki; Tokunaga, Masakazu; Hattori, Minoru; Yoshimitsu, Masanori; Kawahara, Tomohiro; Okajima, Masazumi; Ohdan, Hideki
2013-06-01
The detailed influence of virtual reality training (VRT) and box training (BT) on laparoscopic performance is unknown; we aimed to determine the optimal order of imparting these training programs. This randomized controlled trial involved two groups, each with 20 participants without prior laparoscopic surgical experience: A BT-VRT group (60 min BT followed by 60 min VRT) and a VRT-BT group (60 min VRT followed by 60 min BT). We objectively assessed the laparoscopic skills with a motion-analysis system (Hiroshima University Endoscopic Surgical Assessment Device: HUESAD), which reliably assesses surgical dexterity. Skill assessment was performed before and after the training session. No inter-group differences were identified in the study measures at the pre-training assessment. In both groups, the performance on all tasks was significantly better at the post-training assessment than at the pre-training assessment. However, the outcome of the tests using the HUESAD was significantly better in the VRT-BT group than in the BT-VRT group at the post-training assessment. VRT followed by BT effectively improves the dexterity of novice surgeons during initial laparoscopic (combination) training.
Entropy Generation/Availability Energy Loss Analysis Inside MIT Gas Spring and "Two Space" Test Rigs
NASA Technical Reports Server (NTRS)
Ebiana, Asuquo B.; Savadekar, Rupesh T.; Patel, Kaushal V.
2006-01-01
The results of the entropy generation and availability energy loss analysis under conditions of oscillating pressure and oscillating helium gas flow in two Massachusetts Institute of Technology (MIT) test rigs piston-cylinder and piston-cylinder-heat exchanger are presented. Two solution domains, the gas spring (single-space) in the piston-cylinder test rig and the gas spring + heat exchanger (two-space) in the piston-cylinder-heat exchanger test rig are of interest. Sage and CFD-ACE+ commercial numerical codes are used to obtain 1-D and 2-D computer models, respectively, of each of the two solution domains and to simulate the oscillating gas flow and heat transfer effects in these domains. Second law analysis is used to characterize the entropy generation and availability energy losses inside the two solution domains. Internal and external entropy generation and availability energy loss results predicted by Sage and CFD-ACE+ are compared. Thermodynamic loss analysis of simple systems such as the MIT test rigs are often useful to understand some important features of complex pattern forming processes in more complex systems like the Stirling engine. This study is aimed at improving numerical codes for the prediction of thermodynamic losses via the development of a loss post-processor. The incorporation of loss post-processors in Stirling engine numerical codes will facilitate Stirling engine performance optimization. Loss analysis using entropy-generation rates due to heat and fluid flow is a relatively new technique for assessing component performance. It offers a deep insight into the flow phenomena, allows a more exact calculation of losses than is possible with traditional means involving the application of loss correlations and provides an effective tool for improving component and overall system performance.
Using Maximal Isometric Force to Determine the Optimal Load for Measuring Dynamic Muscle Power
NASA Technical Reports Server (NTRS)
Spiering, Barry A.; Lee, Stuart M. C.; Mulavara, Ajitkumar P.; Bentley, Jason R.; Nash, Roxanne E.; Sinka, Joseph; Bloomberg, Jacob J.
2009-01-01
Maximal power output occurs when subjects perform ballistic exercises using loads of 30-50% of one-repetition maximum (1-RM). However, performing 1-RM testing prior to power measurement requires considerable time, especially when testing involves multiple exercises. Maximal isometric force (MIF), which requires substantially less time to measure than 1-RM, might be an acceptable alternative for determining the optimal load for power testing. PURPOSE: To determine the optimal load based on MIF for maximizing dynamic power output during leg press and bench press exercises. METHODS: Twenty healthy volunteers (12 men and 8 women; mean +/- SD age: 31+/-6 y; body mass: 72 +/- 15 kg) performed isometric leg press and bench press movements, during which MIF was measured using force plates. Subsequently, subjects performed ballistic leg press and bench press exercises using loads corresponding to 20%, 30%, 40%, 50%, and 60% of MIF presented in randomized order. Maximal instantaneous power was calculated during the ballistic exercise tests using force plates and position transducers. Repeated-measures ANOVA and Fisher LSD post hoc tests were used to determine the load(s) that elicited maximal power output. RESULTS: For the leg press power test, six subjects were unable to be tested at 20% and 30% MIF because these loads were less than the lightest possible load (i.e., the weight of the unloaded leg press sled assembly [31.4 kg]). For the bench press power test, five subjects were unable to be tested at 20% MIF because these loads were less than the weight of the unloaded aluminum bar (i.e., 11.4 kg). Therefore, these loads were excluded from analysis. A trend (p = 0.07) for a main effect of load existed for the leg press exercise, indicating that the 40% MIF load tended to elicit greater power output than the 60% MIF load (effect size = 0.38). A significant (p . 0.05) main effect of load existed for the bench press exercise; post hoc analysis indicated that the effect of load on power output was: 30% > 40% > 50% = 60%. CONCLUSION: Loads of 40% and 30% of MIF elicit maximal power output during dynamic leg presses and bench presses, respectively. These findings are similar to those obtained when loading is based on 1-RM.
Egekeze, Nkemakolam; Dubin, Jonathan; Williams, Karen; Bernhardt, Mark
2016-10-05
Integral to an orthopaedic surgeon-patient informed consent discussion is the assessment of patient comprehension of their medical care. However, little is known about how to optimize patient comprehension of an informed consent discussion. The purpose of our study was to evaluate three time-controlled informed consent discussion methods to determine which optimized patient comprehension immediately after the discussion. Sixty-seven consecutive patients with knee osteoarthritis who were considered medically appropriate for a knee corticosteroid injection were enrolled in our trial. Participants were randomized and were allocated into one of three groups in a parallel fashion and 1:1:1 ratio. Our three groups varied by sensory input and included verbal (hearing), verbal and video (hearing and sight), and verbal and model (hearing, sight, and touch). Each participant listened to a 10-minute scripted lecture given by a researcher; this lecture was based on content from the American Academy of Orthopaedic Surgeons patient education web site OrthoInfo. Patient comprehension was assessed after the lecture using a validated questionnaire called the Nkem test. Our primary outcome evaluated patient comprehension utilizing a pairwise comparison of mean comprehension scores between the groups. The primary outcome was analyzed using a one-way analysis of variance with the least significant difference calculated post hoc and a 95% confidence interval (95% CI). The health-care staff, study participants, and outcome assessor were each blinded to group assignments. The mean comprehension scores were 84% (95% CI, 79% to 88%) for the verbal and model group, 74% (95% CI, 63% to 80%) for the verbal and video group, and 71% (95% CI, 61% to 80%) for the verbal group. The omnibus analysis of variance was significant and showed a difference among the groups (p = 0.019). The pairwise comparison of the groups using the least significant difference calculated post hoc showed that the verbal and model group outperformed the verbal group (p = 0.01) and the verbal and video group (p = 0.023). Multisensory patient education incorporating OrthoInfo and an anatomic model optimized patient comprehension immediately after a time-controlled informed consent discussion. This finding could play an important role in improving surgeon-patient communication in the field of orthopaedic surgery. Copyright © 2016 by The Journal of Bone and Joint Surgery, Incorporated.
Post and core build-ups in crown and bridge abutments: Bio-mechanical advantages and disadvantages.
Mamoun, John
2017-06-01
Dentists often place post and core buildups on endodontically treated abutments for crown and bridge restorations. This article analyzes the bio-mechanical purposes, advantages and disadvantages of placing a core or a post and core in an endodontically treated tooth and reviews literature on post and core biomechanics. The author assesses the scientific rationale of the claim that the main purpose of a post is to retain a core, or the claim that posts weaken teeth. More likely, the main function of a post is to help prevent the abutment, on which a crown is cemented, from fracturing such that the abutment separates from the tooth root, at a fracture plane that is located approximately and theoretically at the level of the crown (or ferrule) margin. A post essentially improves the ferrule effect that is provided by the partial fixed denture prosthesis. This paper also explores the difference between bio-mechanical failures of crowns caused by lack of retention or excess taper, versus failures due to a sub-optimal ferrule effect in crown and bridge prostheses.
An improved harmony search algorithm for emergency inspection scheduling
NASA Astrophysics Data System (ADS)
Kallioras, Nikos A.; Lagaros, Nikos D.; Karlaftis, Matthew G.
2014-11-01
The ability of nature-inspired search algorithms to efficiently handle combinatorial problems, and their successful implementation in many fields of engineering and applied sciences, have led to the development of new, improved algorithms. In this work, an improved harmony search (IHS) algorithm is presented, while a holistic approach for solving the problem of post-disaster infrastructure management is also proposed. The efficiency of IHS is compared with that of the algorithms of particle swarm optimization, differential evolution, basic harmony search and the pure random search procedure, when solving the districting problem that is the first part of post-disaster infrastructure management. The ant colony optimization algorithm is employed for solving the associated routing problem that constitutes the second part. The comparison is based on the quality of the results obtained, the computational demands and the sensitivity on the algorithmic parameters.
Shamir, Reuben R; Dolber, Trygve; Noecker, Angela M; Walter, Benjamin L; McIntyre, Cameron C
2015-01-01
Deep brain stimulation (DBS) of the subthalamic region is an established therapy for advanced Parkinson's disease (PD). However, patients often require time-intensive post-operative management to balance their coupled stimulation and medication treatments. Given the large and complex parameter space associated with this task, we propose that clinical decision support systems (CDSS) based on machine learning algorithms could assist in treatment optimization. Develop a proof-of-concept implementation of a CDSS that incorporates patient-specific details on both stimulation and medication. Clinical data from 10 patients, and 89 post-DBS surgery visits, were used to create a prototype CDSS. The system was designed to provide three key functions: (1) information retrieval; (2) visualization of treatment, and; (3) recommendation on expected effective stimulation and drug dosages, based on three machine learning methods that included support vector machines, Naïve Bayes, and random forest. Measures of medication dosages, time factors, and symptom-specific pre-operative response to levodopa were significantly correlated with post-operative outcomes (P < 0.05) and their effect on outcomes was of similar magnitude to that of DBS. Using those results, the combined machine learning algorithms were able to accurately predict 86% (12/14) of the motor improvement scores at one year after surgery. Using patient-specific details, an appropriately parameterized CDSS could help select theoretically optimal DBS parameter settings and medication dosages that have potential to improve the clinical management of PD patients. Copyright © 2015 Elsevier Inc. All rights reserved.
Pepper, Andrew R.; Pawlick, Rena L.; Gala-Lopez, Boris
2016-01-01
ABSTRACT Clinical islet transplantation has routinely been demonstrated to be an efficacious means of restoring glycemic control in select patients with autoimmune diabetes. Notwithstanding marked progress and improvements, the broad-spectrum application of this treatment option is restricted by the complications associated with intrahepatic portal cellular infusion and the scarcity of human donor pancreata. Recent progress in stem cell biology has demonstrated that the potential to expand new β cells for clinical transplantation is now a reality. As such, research focus is being directed toward optimizing safe extrahepatic transplant sites to house future alternative β cell sources for clinical use. The present study expands on our previous development of a prevascularized subcutaneous device-less (DL) technique for cellular transplantation, by demonstrating long-term (>365 d) durable syngeneic murine islet graft function. Furthermore, histological analysis of tissue specimens collected immediately post-DL site creation and acutely post-human islet transplantation demonstrates that this technique results in close apposition of the neovascularized collagen to the transplanted cells without dead space, thereby avoiding hypoxic luminal dead-space. Murine islets transplanted into the DL site created by a larger luminal diameter (6-Fr.) (n = 11), reversed diabetes to the similar capacity as our standard DL method (5-Fr.)(n = 9). Furthermore, glucose tolerance testing did not differ between these 2 transplant groups (p > 0 .05). Taken together, this further refinement of the DL transplant approach facilitates a simplistic means of islet infusion, increases the transplant volume capacity and may provide an effective microenvironment to house future alternative β cell sources. PMID:27820660
Pepper, Andrew R; Bruni, Antonio; Pawlick, Rena L; Gala-Lopez, Boris; Rafiei, Yasmin; Wink, John; Kin, Tatsuya; Shapiro, A M James
2016-11-01
Clinical islet transplantation has routinely been demonstrated to be an efficacious means of restoring glycemic control in select patients with autoimmune diabetes. Notwithstanding marked progress and improvements, the broad-spectrum application of this treatment option is restricted by the complications associated with intrahepatic portal cellular infusion and the scarcity of human donor pancreata. Recent progress in stem cell biology has demonstrated that the potential to expand new β cells for clinical transplantation is now a reality. As such, research focus is being directed toward optimizing safe extrahepatic transplant sites to house future alternative β cell sources for clinical use. The present study expands on our previous development of a prevascularized subcutaneous device-less (DL) technique for cellular transplantation, by demonstrating long-term (>365 d) durable syngeneic murine islet graft function. Furthermore, histological analysis of tissue specimens collected immediately post-DL site creation and acutely post-human islet transplantation demonstrates that this technique results in close apposition of the neovascularized collagen to the transplanted cells without dead space, thereby avoiding hypoxic luminal dead-space. Murine islets transplanted into the DL site created by a larger luminal diameter (6-Fr.) (n = 11), reversed diabetes to the similar capacity as our standard DL method (5-Fr.)(n = 9). Furthermore, glucose tolerance testing did not differ between these 2 transplant groups (p > 0 .05). Taken together, this further refinement of the DL transplant approach facilitates a simplistic means of islet infusion, increases the transplant volume capacity and may provide an effective microenvironment to house future alternative β cell sources.
Optimizing Bariatric Surgery Multidisciplinary Follow-up: a Focus on Patient-Centered Care.
Aarts, Mary-Anne; Sivapalan, Nardhana; Nikzad, Seyed-Ehsan; Serodio, Kristin; Sockalingam, Sanjeev; Conn, Lesley Gotlib
2017-03-01
Failure to follow-up post-bariatric surgery has been associated with higher postoperative complications, lower percentage weight loss and poorer nutrition. This study aimed to understand the patient follow-up experience in order to optimize follow-up care within a comprehensive bariatric surgery program. Qualitative telephone interviews were conducted in patients who underwent surgery through a publically funded multidisciplinary bariatric surgery program in 2011, in Ontario, Canada. Inductive thematic analysis was used. Of the 46 patients interviewed, 76.1 % were female, mean age was 50, and 10 were lost to follow-up within 1 year postsurgery. Therapeutic continuity was the most important element of follow-up care identified by patients and was most frequently established with the dietician, as this team member was highly sought and accessible. Patients who attended regularly (1) appreciated the specialized care, (2) favoured ongoing monitoring and support, (3) were committed to the program and (4) felt their family doctor had insufficient experience/knowledge to manage their follow-up care. Of the 36 people who attended the clinic regularly, 8 were not planning to return after 2 years due to (1) perceived diminishing usefulness, (2) system issues, (3) confidence that their family physician could continue their care or (4) higher priority personal/health issues. Patients lost to follow-up stated similar barriers. Patients believe the follow-up post-bariatric surgery is essential in providing the support required to maintain their diet and health. More personalized care focusing on continuity and relationships catering to individual patient needs balanced with local healthcare resources may redefine and reduce attrition rates.
Cleanthous, Sophie; Kinter, Elizabeth; Marquis, Patrick; Petrillo, Jennifer; You, Xiaojun; Wakeford, Craig; Sabatella, Guido
2017-01-01
Background Study objectives were to evaluate the Multiple Sclerosis Impact Scale (MSIS-29) and explore an optimized scoring structure based on empirical post-hoc analyses of data from the Phase III ADVANCE clinical trial. Methods ADVANCE MSIS-29 data from six time-points were analyzed in a sample of patients with relapsing–remitting multiple sclerosis (RRMS). Rasch Measurement Theory (RMT) analysis was undertaken to examine three broad areas: sample-to-scale targeting, measurement scale properties, and sample measurement validity. Interpretation of results led to an alternative MSIS-29 scoring structure, further evaluated alongside responsiveness of the original and revised scales at Week 48. Results RMT analysis provided mixed evidence for Physical and Psychological Impact scales that were sub-optimally targeted at the lower functioning end of the scales. Their conceptual basis could also stand to improve based on item fit results. The revised MSIS-29 rescored scales improved but did not resolve the measurement scale properties and targeting of the MSIS-29. In two out of three revised scales, responsiveness analysis indicated strengthened ability to detect change. Conclusion The revised MSIS-29 provides an initial evidence-based improved patient-reported outcome (PRO) instrument for evaluating the impact of MS. Revised scoring improves conceptual clarity and interpretation of scores by refining scale structure to include Symptoms, Psychological Impact, and General Limitations. Clinical trial ADVANCE (ClinicalTrials.gov identifier NCT00906399). PMID:29104758
Fluid Overload is Associated with Late Poor Outcomes in Neonates Following Cardiac Surgery
Wilder, Nicole S; Yu, Sunkyung; Donohue, Janet E; Goldberg, Caren S; Blatt, Neal B
2016-01-01
Objective Acute kidney injury (AKI) is a severe complication of cardiac surgery associated with increased morbidity and mortality, yet AKI classification for neonates remains challenging. We characterized patterns of post-operative fluid overload (FO) as a surrogate marker for AKI and as a risk factor of poor post-operative outcomes in neonates undergoing cardiac surgery. Design Retrospective cohort study. Setting Single, congenital heart center destination program. Patients 435 neonates undergoing cardiac surgery with cardiopulmonary bypass from January 2006 through December 2010. Interventions None Measurements and Main Results Demographics, diagnosis, and perioperative clinical variables were collected, including daily weights and serum creatinine (SCr) levels. A composite poor clinical outcome (death, need for renal replacement therapy (RRT), or extracorporeal life support (ECLS) within 30 post-operative days) was considered the primary outcome measure. Twenty-one neonates (5%) had a composite poor outcome with 7 (2%) requiring RRT, 8 (2%) requiring ECLS, and 14 (3%) dying between 3 and 30 days post-surgery. Neonates with a composite poor outcome had significantly higher maximum FO (>20%) and were slower to diurese. A receiver-operating characteristic curve determined that FO ≥ 16% and SCr ≥ 0.9 on post-operative day 3 were the optimal cutoffs for significant discrimination on the primary outcome (area under the curve = 0.71 and 0.76, respectively). In multivariable analysis, FO ≥ 16% (adjusted odds ratio [AOR] = 3.7) and SCr ≥ 0.9 (AOR = 6.6) on post-operative day 3 remained an independent risk factor for poor outcome. FO ≥ 16% was also significantly associated with cardiac arrest requiring cardiopulmonary resuscitation, prolonged intensive care unit stay, and chest re-exploration. Conclusions This study highlights the importance of monitoring fluid balance in the neonatal cardiac surgical population, and suggests that daily FO, a readily-available, non-invasive marker of renal function, may be a sensitive and specific predictor of adverse outcomes. PMID:27028790
Karagiorgou, Olga; Evans, Jonathan J; Cullen, Breda
2018-03-01
Post-traumatic growth (PTG) can occur following acquired brain injury (ABI). It has been proposed that people experiencing psychological distress following ABI may benefit from a positive psychotherapy intervention (PPT) aimed at increasing well-being; PPT may also influence PTG. We aimed to investigate PTG experiences in participants of a positive psychotherapy pilot trial. ABI survivors who had received PPT or treatment as usual (TAU) were interviewed individually after the end of the trial. Thematic analysis was conducted, to code transcripts for known themes from PTG literature as well as newly emerging themes. Four participants (age = 46-62; n = 3 male; months since injury = 11-20) from the PPT group and three (age = 58-74; n = 2 male; months since injury = 9-22) from the TAU group were interviewed. Six themes were shared across both groups: personal strength, appreciation of life, relating to others, optimism/positive attitude, feeling fortunate compared to others, and positive emotional/behavioral changes. Two themes were expressed by PPT participants only: lifestyle improvements and new possibilities. One TAU participant reported spiritual change. A greater understanding of the development of PTG following ABI may help rehabilitation clinicians to promote better adjustment by focusing on clients' potential for positive change and enhancing their capacity for growth. Implications for Rehabilitation Post-traumatic growth is "positive psychological change experienced as the result of the struggle with highly challenging life circumstances." This is the first qualitative investigation of post-traumatic growth in participants in a positive psychotherapy trial following acquired brain injury. Several post-traumatic growth themes were shared by participants from the positive psychotherapy and treatment as usual study arms, with additional themes evident only in positive psychotherapy participants. A greater understanding of post-traumatic growth among rehabilitation professionals may help to promote adjustment following brain injury.
Hayami, Tadashi; Pickarski, Maureen; Zhuo, Ya; Wesolowski, Gregg A; Rodan, Gideon A; Duong, Le T
2006-02-01
Osteoarthritis (OA) is a chronic joint disease characterized by cartilage destruction, subchondral bone sclerosis, and osteophyte formation. Subchondral bone stiffness has been proposed to initiate and/or contribute to cartilage deterioration in OA. The purpose of this study was to characterize subchondral bone remodeling, cartilage damage, and osteophytosis during the disease progression in two models of surgically induced OA. Rat knee joints were subjected either to anterior cruciate ligament transection (ACLT) alone or in combination with resection of medial menisci (ACLT + MMx). Histopathological changes in the surgical joints were compared with sham at 1, 2, 4, 6, and 10 weeks post-surgery. Using a modified Mankin scoring system, we demonstrate that articular cartilage damage occurs within 2 weeks post-surgery in both surgical models. Detectable cartilage surface damage and proteoglycan loss were observed as early as 1 week post-surgery. These were followed by the increases in vascular invasion into cartilage, in loss of chondrocyte number and in cell clustering. Histomorphometric analysis revealed subchondral bone loss in both models within 2 weeks post-surgery followed by significant increases in subchondral bone volume relative to sham up to 10 weeks post-surgery. Incidence of osteophyte formation was optimally observed in ACLT joints at 10 weeks and in ACLT + MMx joints at 6 weeks post-surgery. In summary, the two surgically induced rat OA models share many characteristics seen in human and other animal models of OA, including progressive articular cartilage degradation, subchondral bone sclerosis, and osteophyte formation. Moreover, increased subchondral bone resorption is associated with early development of cartilage lesions, which precedes significant cartilage thinning and subchondral bone sclerosis. Together, these findings support a role for bone remodeling in OA pathogenesis and suggest that these rat models are suitable for evaluating bone resorption inhibitors as potential disease-modifying pharmaco-therapies.
StrAuto: automation and parallelization of STRUCTURE analysis.
Chhatre, Vikram E; Emerson, Kevin J
2017-03-24
Population structure inference using the software STRUCTURE has become an integral part of population genetic studies covering a broad spectrum of taxa including humans. The ever-expanding size of genetic data sets poses computational challenges for this analysis. Although at least one tool currently implements parallel computing to reduce computational overload of this analysis, it does not fully automate the use of replicate STRUCTURE analysis runs required for downstream inference of optimal K. There is pressing need for a tool that can deploy population structure analysis on high performance computing clusters. We present an updated version of the popular Python program StrAuto, to streamline population structure analysis using parallel computing. StrAuto implements a pipeline that combines STRUCTURE analysis with the Evanno Δ K analysis and visualization of results using STRUCTURE HARVESTER. Using benchmarking tests, we demonstrate that StrAuto significantly reduces the computational time needed to perform iterative STRUCTURE analysis by distributing runs over two or more processors. StrAuto is the first tool to integrate STRUCTURE analysis with post-processing using a pipeline approach in addition to implementing parallel computation - a set up ideal for deployment on computing clusters. StrAuto is distributed under the GNU GPL (General Public License) and available to download from http://strauto.popgen.org .
2012-01-01
Background Nanoparticle based delivery of anticancer drugs have been widely investigated. However, a very important process for Research & Development in any pharmaceutical industry is scaling nanoparticle formulation techniques so as to produce large batches for preclinical and clinical trials. This process is not only critical but also difficult as it involves various formulation parameters to be modulated all in the same process. Methods In our present study, we formulated curcumin loaded poly (lactic acid-co-glycolic acid) nanoparticles (PLGA-CURC). This improved the bioavailability of curcumin, a potent natural anticancer drug, making it suitable for cancer therapy. Post formulation, we optimized our process by Reponse Surface Methodology (RSM) using Central Composite Design (CCD) and scaled up the formulation process in four stages with final scale-up process yielding 5 g of curcumin loaded nanoparticles within the laboratory setup. The nanoparticles formed after scale-up process were characterized for particle size, drug loading and encapsulation efficiency, surface morphology, in vitro release kinetics and pharmacokinetics. Stability analysis and gamma sterilization were also carried out. Results Results revealed that that process scale-up is being mastered for elaboration to 5 g level. The mean nanoparticle size of the scaled up batch was found to be 158.5 ± 9.8 nm and the drug loading was determined to be 10.32 ± 1.4%. The in vitro release study illustrated a slow sustained release corresponding to 75% drug over a period of 10 days. The pharmacokinetic profile of PLGA-CURC in rats following i.v. administration showed two compartmental model with the area under the curve (AUC0-∞) being 6.139 mg/L h. Gamma sterilization showed no significant change in the particle size or drug loading of the nanoparticles. Stability analysis revealed long term physiochemical stability of the PLGA-CURC formulation. Conclusions A successful effort towards formulating, optimizing and scaling up PLGA-CURC by using Solid-Oil/Water emulsion technique was demonstrated. The process used CCD-RSM for optimization and further scaled up to produce 5 g of PLGA-CURC with almost similar physicochemical characteristics as that of the primary formulated batch. PMID:22937885
Ranjan, Amalendu P; Mukerjee, Anindita; Helson, Lawrence; Vishwanatha, Jamboor K
2012-08-31
Nanoparticle based delivery of anticancer drugs have been widely investigated. However, a very important process for Research & Development in any pharmaceutical industry is scaling nanoparticle formulation techniques so as to produce large batches for preclinical and clinical trials. This process is not only critical but also difficult as it involves various formulation parameters to be modulated all in the same process. In our present study, we formulated curcumin loaded poly (lactic acid-co-glycolic acid) nanoparticles (PLGA-CURC). This improved the bioavailability of curcumin, a potent natural anticancer drug, making it suitable for cancer therapy. Post formulation, we optimized our process by Reponse Surface Methodology (RSM) using Central Composite Design (CCD) and scaled up the formulation process in four stages with final scale-up process yielding 5 g of curcumin loaded nanoparticles within the laboratory setup. The nanoparticles formed after scale-up process were characterized for particle size, drug loading and encapsulation efficiency, surface morphology, in vitro release kinetics and pharmacokinetics. Stability analysis and gamma sterilization were also carried out. Results revealed that that process scale-up is being mastered for elaboration to 5 g level. The mean nanoparticle size of the scaled up batch was found to be 158.5±9.8 nm and the drug loading was determined to be 10.32±1.4%. The in vitro release study illustrated a slow sustained release corresponding to 75% drug over a period of 10 days. The pharmacokinetic profile of PLGA-CURC in rats following i.v. administration showed two compartmental model with the area under the curve (AUC0-∞) being 6.139 mg/L h. Gamma sterilization showed no significant change in the particle size or drug loading of the nanoparticles. Stability analysis revealed long term physiochemical stability of the PLGA-CURC formulation. A successful effort towards formulating, optimizing and scaling up PLGA-CURC by using Solid-Oil/Water emulsion technique was demonstrated. The process used CCD-RSM for optimization and further scaled up to produce 5 g of PLGA-CURC with almost similar physicochemical characteristics as that of the primary formulated batch.
NASA Astrophysics Data System (ADS)
Menon, Prahlad; Sotiropoulos, Fotis; Undar, Akif; Pekkan, Kerem
2011-11-01
Hemodynamically efficient aortic outflow cannulae can provide high blood volume flow rates at low exit force during extracorporeal circulation in pediatric or neonatal cardiopulmonary bypass repairs. Furthermore, optimal hemolytic aortic insertion configurations can significantly reduce risk of post-surgical neurological complications and developmental defects in the young patient. The methodology and results presented in this study serve as a baseline for design of superior aortic outflow cannulae based on a novel paradigm of characterizing jet-flows at different flow regimes. In-silico evaluations of multiple cannula tips were used to delineate baseline hemodynamic performance of the popular pediatric cannula tips in an experimental cuboidal test-rig, using PIV. High resolution CFD jet-flow simulations performed for various cannula tips in the cuboidal test-rig as well as in-vivo insertion configurations have suggested the existence of optimal surgically relevant characteristics such as cannula outflow angle and insertion depth for improved hemodynamic performance during surgery. Improved cannula tips were designed with internal flow-control features for decreased blood damage and increased permissible flow rates.
Lightning location system supervising Swedish power transmission network
NASA Technical Reports Server (NTRS)
Melin, Stefan A.
1991-01-01
For electric utilities, the ability to prevent or minimize lightning damage on personnel and power systems is of great importance. Therefore, the Swedish State Power Board, has been using data since 1983 from a nationwide lightning location system (LLS) for accurately locating lightning ground strikes. Lightning data is distributed and presented on color graphic displays at regional power network control centers as well as at the national power system control center for optimal data use. The main objectives for use of LLS data are: supervising the power system for optimal and safe use of the transmission and generating capacity during periods of thunderstorms; warning service to maintenance and service crews at power line and substations to end operations hazardous when lightning; rapid positioning of emergency crews to locate network damage at areas of detected lightning; and post analysis of power outages and transmission faults in relation to lightning, using archived lightning data for determination of appropriate design and insulation levels of equipment. Staff have found LLS data useful and economically justified since the availability of power system has increased as well as level of personnel safety.
NASA Astrophysics Data System (ADS)
Wu, C. N.; Tseng, C. C.; Lin, K. Y.; Cheng, C. K.; Yeh, S. L.; Fanchiang, Y. T.; Hong, M.; Kwo, J.
2018-05-01
High-quality single-crystal thulium iron garnet (TmIG) films of 10-30 nm thick were grown by off-axis sputtering at room temperature (RT) followed by post-annealing. X-ray photoelectron spectroscopy (XPS) was employed to determine the TmIG film composition to optimize the growth conditions, along with the aid of x-ray diffraction (XRD) structural analysis and atomic force microscope (AFM) for surface morphology. The optimized films exhibited perpendicular magnetic anisotropy (PMA) and the saturation magnetization at RT was ˜99 emu/cm3, close to the RT bulk value ˜110 emu/cm3 with a very low coercive field of ˜2.4 Oe. We extracted the H⊥ of 1734 Oe and the peak-to-peak linewidth ΔH of ferromagnetic resonance are only about 99 Oe, significantly lower than that of PLD grown TmIG film and bulk single crystals. The high-quality sputtered single-crystal TmIG films show great potential to be integrated with topological insulators or heavy metals with strong spin-orbit coupling for spintronic applications.
Vibrational spectra, DFT quantum chemical calculations and conformational analysis of P-iodoanisole.
Arivazhagan, M; Anitha Rexalin, D; Geethapriya, J
2013-09-01
The solid phase FT-IR and FT-Raman spectra of P-iodoanisole (P-IA) have been recorded in the regions 400-4000 and 50-4000 cm(-1), respectively. The spectra were interpreted in terms of fundamentals modes, combination and overtone bands. The structure of the molecule was optimized and the structural characteristics were determined by ab initio (HF) and density functional theory (B3LYP) methods with LanL2DZ as basis set. The potential energy surface scan for the selected dihedral angle of P-IA has been performed to identify stable conformer. The optimized structure parameters and vibrational wavenumbers of stable conformer have been predicted by density functional B3LYP method with LanL2DZ (with effective core potential representations of electrons near the nuclei for post-third row atoms) basis set. The nucleophilic and electrophilic sites obtained from the molecular electrostatic potential (MEP) surface were calculated. The temperature dependence of thermodynamic properties has been analyzed. Several thermodynamic parameters have been calculated using B3LYP with LanL2DZ basis set. Copyright © 2013 Elsevier B.V. All rights reserved.
Zhao, Yimeng; Sun, Liangliang; Zhu, Guijie; Dovichi, Norman J
2016-10-07
We used reversed-phase liquid chromatography to separate the yeast proteome into 23 fractions. These fractions were then analyzed using capillary zone electrophoresis (CZE) coupled to a Q-Exactive HF mass spectrometer using an electrokinetically pumped sheath flow interface. The parameters of the mass spectrometer were first optimized for top-down proteomics using a mixture of seven model proteins; we observed that intact protein mode with a trapping pressure of 0.2 and normalized collision energy of 20% produced the highest intact protein signals and most protein identifications. Then, we applied the optimized parameters for analysis of the fractionated yeast proteome. From this, 580 proteoforms and 180 protein groups were identified via database searching of the MS/MS spectra. This number of proteoform identifications is two times larger than that of previous CZE-MS/MS studies. An additional 3,243 protein species were detected based on the parent ion spectra. Post-translational modifications including N-terminal acetylation, signal peptide removal, and oxidation were identified.
Brief communication: Post-seismic landslides, the tough lesson of a catastrophe
NASA Astrophysics Data System (ADS)
Fan, Xuanmei; Xu, Qiang; Scaringi, Gianvito
2018-01-01
The rock avalanche that destroyed the village of Xinmo in Sichuan, China, on 24 June 2017, brought the issue of landslide risk and disaster chain management in highly seismic regions back into the spotlight. The long-term post-seismic behaviour of mountain slopes is complex and hardly predictable. Nevertheless, the integrated use of field monitoring, remote sensing and real-time predictive modelling can help to set up effective early warning systems, provide timely alarms, optimize rescue operations, and perform secondary hazard assessments. We believe that a comprehensive discussion on post-seismic slope stability and on its implications for policy makers can no longer be postponed.
Borri, Marco; Schmidt, Maria A.; Powell, Ceri; Koh, Dow-Mu; Riddell, Angela M.; Partridge, Mike; Bhide, Shreerang A.; Nutting, Christopher M.; Harrington, Kevin J.; Newbold, Katie L.; Leach, Martin O.
2015-01-01
Purpose To describe a methodology, based on cluster analysis, to partition multi-parametric functional imaging data into groups (or clusters) of similar functional characteristics, with the aim of characterizing functional heterogeneity within head and neck tumour volumes. To evaluate the performance of the proposed approach on a set of longitudinal MRI data, analysing the evolution of the obtained sub-sets with treatment. Material and Methods The cluster analysis workflow was applied to a combination of dynamic contrast-enhanced and diffusion-weighted imaging MRI data from a cohort of squamous cell carcinoma of the head and neck patients. Cumulative distributions of voxels, containing pre and post-treatment data and including both primary tumours and lymph nodes, were partitioned into k clusters (k = 2, 3 or 4). Principal component analysis and cluster validation were employed to investigate data composition and to independently determine the optimal number of clusters. The evolution of the resulting sub-regions with induction chemotherapy treatment was assessed relative to the number of clusters. Results The clustering algorithm was able to separate clusters which significantly reduced in voxel number following induction chemotherapy from clusters with a non-significant reduction. Partitioning with the optimal number of clusters (k = 4), determined with cluster validation, produced the best separation between reducing and non-reducing clusters. Conclusion The proposed methodology was able to identify tumour sub-regions with distinct functional properties, independently separating clusters which were affected differently by treatment. This work demonstrates that unsupervised cluster analysis, with no prior knowledge of the data, can be employed to provide a multi-parametric characterization of functional heterogeneity within tumour volumes. PMID:26398888
Effects of different peracetic acid formulations on post space radicular dentin.
Belizário, Lauriê Garcia; Kuga, Milton Carlos; Castro-Núñez, Gabriela Mariana; Escalante-Otárola, Wilfredo Gustavo; Só, Marcus Vinicius Reis; Pereira, Jefferson Ricardo
2018-01-05
The optimal irrigating solution with antimicrobial and dentin cleansing properties for post space preparation for fiber posts is unclear. Peracetic acid is one option but is available in various chemical formulations that require evaluation. The purpose of this in vitro study was to evaluate dentin surface cleanliness based on the presence of a smear layer and the number of open dentin tubules. It also investigates the chemical composition of residues after canal irrigation with a 1% peracetic acid solution (PA) at low or high concentration of hydrogen peroxide during the preparation of intracanal fiber posts. After filling the root canals of 40 mandibular incisors, a rotary instrument was used for intracanal preparation to place fiber posts. The teeth were divided into 4 groups (n=10) according to the post space irrigation protocol as follows: CG (control): distilled water; NA (NaOCl): 2.5% sodium hypochlorite; LH: PA with low concentration of hydrogen peroxide; and HH: PA with high concentrations of hydrogen peroxide. After irrigation, the teeth were sectioned, and the intracanal dentin surface was subjected to analysis using energy dispersive spectroscopy to evaluate chemical composition and to scanning electron microscopy (×500) to evaluate the presence of the smear layer. The number of open dentin tubules was measured by scanning electron microscopy analysis (×2000) using photo-editing software. ANOVA and the Tukey test (α=.05) were used to evaluate the data, except for the presence of a smear layer, for which the Kruskal-Wallis and Dunn tests were used (α=.05). The highest concentrations of oxygen in the dentin residues were detected in LH and HH (P<.05); CG and NA showed similar oxygen concentrations (P>.05). NA had a higher concentration of chlorine (P<.05), whereas LH had a lower amount of smear layer and a larger number of open dentin tubules than the other groups (P<.05). These were equivalent to each other (P>.05), except for HH, which also had a larger number of open dentin tubules than CG and NA (P<.05). PA 1% with a low concentration of hydrogen peroxide yielded a lower amount of smear layer and a larger number of open dentin tubules in the dentin of the post space when compared with PA 1% with a high concentration of hydrogen peroxide, despite maintaining a similar oxygen concentration in these dentin residues. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
Adult survivors' lived experience of burns and post-burn health: A qualitative analysis.
Abrams, Thereasa E; Ogletree, Roberta J; Ratnapradipa, Dhitinut; Neumeister, Michael W
2016-02-01
The individual implications of major burns are likely to affect the full spectrum of patients' physical, emotional, psychological, social, environmental, spiritual and vocational health. Yet, not all of the post-burn health implications are inevitably negative. Utilizing a qualitative approach, this heuristic phenomenological study explores the experiences and perceptions early (ages 18-35) and midlife (ages 36-64) adults providing insight for how participants perceived their burns in relationship to their post-burn health. Participants were interviewed using semi-structured interview questions framed around seven domains of health. Interview recordings were transcribed verbatim then coded line by line, identifying dominant categories related to health. Categories were analyzed identifying shared themes among the study sample. Participants were Caucasian, seven males and one female. Mean age at time of interviews was 54.38 and 42.38 at time of burns. Mean time since burns occurred was 9.38 years with a minimum of (20%) total body surface area (TBSA) burns. Qualitative content analysis rendered three emergent health-related categories and associated themes that represented shared meanings within the participant sample. The category of "Physical Health" reflected the theme physical limitations, pain and sensitivity to temperature. Within the category of "Intellectual Health" were themes of insight, goal setting and self-efficacy, optimism and humor and within "Emotional Health" were the themes empathy and gratitude. By exploring subjective experiences and perceptions of health shared through dialog with experienced burned persons, there are opportunities to develop a more complete picture of how holistic health may be affected by major burns that in turn could support future long-term rehabilitative trajectories of early and midlife adult burn patients. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.
Sigle, Joerg-Peter; Medinger, Michael; Stern, Martin; Infanti, Laura; Heim, Dominik; Halter, Joerg; Gratwohl, Alois; Buser, Andreas
2012-01-01
Specialized centers claim a need for blood component production independent from the general blood transfusion services. We performed a prospective change control analysis of the transfer of platelet (PLT) production for hematological patients at the University Hospital Basel from the Department of Hematology to the Blood Transfusion Centre, Swiss Red Cross, Basel in February 2006. We wanted to demonstrate that neither quality nor transfusion outcome was affected. Production quantity and efficiency, product quality and transfusion outcome were systematically recorded. A 2-year pretransfer period was compared to a 2 year post-transfer period. After transfer production quantity at the Blood Transfusion Centre increased from 4,483 to 6,190 PLT concentrates. Production efficiency increased with a significant decrease in the rate of expired products (18% vs. 8%; P < 0.001). Product quality showed a slight decrease in median PLT count per unit (2.84 vs. 2.75 × 10(11); P < 0.001) and a slight increase in mean storage time prior to transfusion (3.18 vs. 3.30 days; P < 0.001). Transfusion outcome measured as median corrected count increment one hour post-transfusion (10.5 vs. 10.7; P = 0.3) and the rate of patients with inadequate post-transfusion increment (31.5% vs. 32.1%; P = 0.6) did not differ. Supply and quality of PLT products was maintained after the transfer of PLT production to the Blood Transfusion Centre. An optimization of the supply chain process with markedly decreased expiration rates was achieved. These results argue against the need of specialized PLT production sites for selected patient groups. Copyright © 2012 Wiley Periodicals, Inc.
Sabry, Nirmeen; Dawoud, Dalia; Alansary, Adel; Hounsome, Natalia; Baines, Darrin
2015-12-01
Timely switching from intravenous to oral therapy ensures optimized treatment and efficient use of health care resources. Intravenous (IV) paracetamol is widely used for post-operative pain management but not always switched to the oral form in a timely manner, leading to unnecessary increase in expenditure. This study aims to evaluate the impact of a multifaceted intervention to promote timely switching from the IV to oral form in the post-operative setting. An evidence-based prescribing protocol was designed and implemented by the clinical pharmacy team in a single district general hospital in Egypt. The protocol specified the criteria for appropriate prescribing of IV paracetamol. Doctors were provided with information and educational sessions prior to implementation. A prospective, quasi-experimental study was undertaken to evaluate its impact on IV paracetamol utilization and costs. Data on monthly utilization and costs were recorded for 12 months before and after implementation (January 2012 to December 2013). Data were analysed using interrupted time series analysis. Prior to implementation, in 2012, total spending on IV paracetamol was 674 154.00 Egyptian Pounds (L.E.) ($23,668.00). There was a non-significant (P > 0.05) downward trend in utilization (-32 ampoules per month) and costs [reduction of 632 L.E. ($222) per month]. Following implementation, immediate decrease in utilization and costs (P < 0.05) and a trend change over the follow-up period were observed. Average monthly reduction was 26% (95% CI: 24% to 28%, P < 0.001). A multifaceted, protocol-based intervention to ensure timely switching from IV-to-oral paracetamol achieved significant reduction in utilization and cost of IV paracetamol in the first 5 months of its implementation. © 2015 John Wiley & Sons, Ltd.
Porrata, Luis F; Inwards, David J; Ansell, Stephen M; Micallef, Ivana N; Johnston, Patrick B; Hogan, William J; Markovic, Svetomir N
2015-07-03
The infused autograft lymphocyte-to-monocyte ratio (A-LMR) is a prognostic factor for survival in B-cell lymphomas post-autologous peripheral hematopoietic stem cell transplantation (APHSCT). Thus, we set out to investigate if the A-LMR is also a prognostic factor for survival post-APHSCT in T-cell lymphomas. From 1998 to 2014, 109 T-cell lymphoma patients that underwent APHSCT were studied. Receiver operating characteristic (ROC) and area under the curve (AUC) were used to identify the optimal cut-off value of A-LMR for survival analysis and k-fold cross-validation model to validate the A-LMR cut-off value. Univariate and multivariate Cox proportional hazard models were used to assess the prognostic discriminator power of A-LMR. ROC and AUC identified an A-LMR ≥ 1 as the best cut-off value and was validated by k-fold cross-validation. Multivariate analysis showed A-LMR to be an independent prognostic factor for overall survival (OS) and progression-free survival (PFS). Patients with an A-LMR ≥ 1.0 experienced a superior OS and PFS versus patients with an A-LMR < 1.0 [median OS was not reached vs 17.9 months, 5-year OS rates of 87% (95% confidence interval (CI), 75-94%) vs 26% (95% CI, 13-42%), p < 0.0001; median PFS was not reached vs 11.9 months, 5-year PFS rates of 72% (95% CI, 58-83%) vs 16% (95% CI, 6-32%), p < 0.0001]. A-LMR is also a prognostic factor for clinical outcomes in patients with T-cell lymphomas undergoing APHSCT.
Post-introduction observation of transcatheter aortic valve implantation in Galicia (Spain).
Varela-Lema, Leonor; Queiro-Verdes, Teresa; Baz-Alonso, José A; Cuenca-Castillo, José J; Durán-Muñoz, Darío; Gónzalez-Juanatey, José R; Herrera Noreña, José M; Iñiguez-Romo, Andrés; López-Otero, Diego; Pradas-Montilla, Gonzalo; Rubio-Álvarez, José; Salgado-Fernández, Jorge; Trillo Nouche, Ramiro; Vázquez-González, Nicolás; López-García, Marisa
2015-02-01
Transcatheter aortic valve implantation constitutes an example of a technology introduced into the Galician Health Care System basket and subjected to a post-introduction observational study after coverage. This paper aims to describe the process and results of this experience, illustrating the main challenges and opportunities in using these studies for supporting decision making. The study protocol was developed by a multidisciplinary team consisting of experts from the Galician HTA Agency (avalia-t), interventional cardiologists and cardiac surgeons. Together they agreed on the information that was relevant and feasible for collection, and planned the study design, data collection and analysis of results. During the 1-year recruitment period, 94 patients underwent percutaneous aortic valve replacement in the three authorized centres. Implantation rate and prosthesis models differed substantially across the centres. Overall, procedural success rate was 96.8% and hospital mortality was 7.4%. Complications during post-surgical admission were recorded in 40.4% of patients. Moderate residual aortic regurgitation was observed in 10% of patients, and the procedure was associated with a stroke rate of 3.3% at 30 days and 5.3% at 1 year. Post-introduction observation has made it feasible to determine the use of this procedure within the SERGAS context and has enabled the assessment of performance in real-life conditions. The proposed strategic actions and interventions have been drawn up based upon the collective judgement of a group of experienced professionals, and have served to establish recommendations on further research that would be required to optimize health benefits. © 2014 John Wiley & Sons, Ltd.
Boks, Marco P; Rutten, Bart P F; Geuze, Elbert; Houtepen, Lotte C; Vermetten, Eric; Kaminsky, Zachary; Vinkers, Christiaan H
2016-01-01
Genomic variation in the SKA2 gene has recently been identified as a promising suicide biomarker. In light of its role in glucocorticoid receptor transactivation, we investigated whether SKA2 DNA methylation influences cortisol stress reactivity and is involved in the development of post-traumatic stress disorder (PTSD). Increased SKA2 methylation was significantly associated with lower cortisol stress reactivity in 85 healthy individuals exposed to the Trier Social Stress Test (B=−173.40, t=−2.324, p-value=0.023). Next, we observed that longitudinal decreases in SKA2 methylation after deployment were associated with the emergence of post-deployment PTSD symptoms in a Dutch military cohort (N=93; B=−0.054, t=−3.706, p-value=3.66 × 10−4). In contrast, exposure to traumatic stress during deployment by itself resulted in longitudinal increases in SKA2 methylation (B=0.037, t=4.173, p-value=6.98 × 10−5). Using pre-deployment SKA2 methylation levels and childhood trauma exposure, we found that the previously published suicide prediction rule significantly predicted post-deployment PTSD symptoms (AUC=0.66, 95% CI: 0.53–0.79) with an optimal sensitivity of 0.81 and specificity of 0.91. Permutation analysis using random methylation loci supported these findings. Together, these data establish the importance of SKA2 for cortisol stress responsivity and the development of PTSD and provide further evidence that SKA2 is a promising biomarker for stress-related disorders including PTSD. PMID:26361058
Boks, Marco P; Rutten, Bart P F; Geuze, Elbert; Houtepen, Lotte C; Vermetten, Eric; Kaminsky, Zachary; Vinkers, Christiaan H
2016-04-01
Genomic variation in the SKA2 gene has recently been identified as a promising suicide biomarker. In light of its role in glucocorticoid receptor transactivation, we investigated whether SKA2 DNA methylation influences cortisol stress reactivity and is involved in the development of post-traumatic stress disorder (PTSD). Increased SKA2 methylation was significantly associated with lower cortisol stress reactivity in 85 healthy individuals exposed to the Trier Social Stress Test (B=-173.40, t=-2.324, p-value=0.023). Next, we observed that longitudinal decreases in SKA2 methylation after deployment were associated with the emergence of post-deployment PTSD symptoms in a Dutch military cohort (N=93; B=-0.054, t=-3.706, p-value=3.66 × 10(-4)). In contrast, exposure to traumatic stress during deployment by itself resulted in longitudinal increases in SKA2 methylation (B=0.037, t=4.173, p-value=6.98 × 10(-5)). Using pre-deployment SKA2 methylation levels and childhood trauma exposure, we found that the previously published suicide prediction rule significantly predicted post-deployment PTSD symptoms (AUC=0.66, 95% CI: 0.53-0.79) with an optimal sensitivity of 0.81 and specificity of 0.91. Permutation analysis using random methylation loci supported these findings. Together, these data establish the importance of SKA2 for cortisol stress responsivity and the development of PTSD and provide further evidence that SKA2 is a promising biomarker for stress-related disorders including PTSD.
2012-01-01
Background Variability among stallions in terms of semen cryopreservation quality renders it difficult to arrive at a standardized cryopreservation method. Different extenders and processing techniques (such us colloidal centrifugation) are used in order to optimize post-thaw sperm quality. Sperm chromatin integrity analysis is an effective tool for assessing such quality. The aim of the present study was to compare the effect of two single layer colloidal centrifugation protocols (prior to cryopreservation) in combination with three commercial freezing extenders on the post-thaw chromatin integrity of equine sperm samples at different post-thaw incubation (37°C) times (i.e., their DNA fragmentation dynamics). Results Post-thaw DNA fragmentation levels in semen samples subjected to either of the colloidal centrifugation protocols were significantly lower (p<0.05) immediately after thawing and after 4 h of incubation at 37°C compared to samples that underwent standard (control) centrifugation. The use of InraFreeze® extender was associated with significantly less DNA fragmentation than the use of Botu-Crio® extender at 6 h of incubation, and than the use of either Botu-Crio® or Gent® extender at 24 h of incubation (p<0.05). Conclusions These results suggest that single layer colloidal centrifugation performed with extended or raw semen prior to cryopreservation reduces DNA fragmentation during the first four hours after thawing. Further studies are needed to determine the influence of freezing extenders on equine sperm DNA fragmentation dynamics. PMID:23217215
A fluorescence-based imaging approach to pharmacokinetic analysis of intracochlear drug delivery.
Ayoob, Andrew M; Peppi, Marcello; Tandon, Vishal; Langer, Robert; Borenstein, Jeffrey T
2018-04-05
Advances in microelectromechanical systems (MEMS) technologies are enhancing the development of intracochlear delivery devices for the treatment of hearing loss with emerging pharmacological therapies. Direct intracochlear delivery addresses the limitations of systemic and intratympanic delivery. However, optimization of delivery parameters for these devices requires pharmacokinetic assessment of the spatiotemporal drug distribution inside the cochlea. Robust methods of measuring drug concentration in the perilymph have been developed, but lack spatial resolution along the tonotopic axis or require complex physiological measurements. Here we describe an approach for quantifying distribution of fluorescent drug-surrogate probe along the cochlea's sensory epithelium with high spatial resolution enabled by confocal fluorescence imaging. Fluorescence from FM 1-43 FX, a fixable endocytosis marker, was quantified using confocal fluorescence imaging of whole mount sections of the organ of Corti from cochleae resected and fixed at several time points after intracochlear delivery. Intracochlear delivery of FM 1-43 FX near the base of the cochlea produces a base-apex gradient of fluorescence in the row of inner hair cells after 1 h post-delivery that is consistent with diffusion-limited transport along the scala tympani. By 3 h post-delivery there is approximately an order of magnitude decrease in peak average fluorescence intensity, suggesting FM 1-43 FX clearance from both the perilymph and inner hair cells. The increase in fluorescence intensity at 72 h post-delivery compared to 3 h post-delivery may implicate a potential radial transport pathway into the scala media. Copyright © 2018 Elsevier B.V. All rights reserved.
Resnick, Barbara; Galik, Elizabeth; Wells PT, Chris L.; Boltz, Marie; Holtzman, Lauren
2015-01-01
By 2050 it is anticipated that close to half (40%) of all trauma patients will be over the age of 65. Recovery post trauma for these individuals is more complicated than among younger individuals. Specifically there is an increased risk for: (1) functional decline; (2) higher mortality rates; (3) longer length of stay; (4) greater resource consumption; (5) nursing home placement; (6) adverse events such as infections, pressure ulcers and falls; and (7) rehospitalization post discharge. Early mobilization has been shown to improve outcomes. Unfortunately, there are many challenges to early mobilization. The Function Focused Care Intervention was developed to overcome these challenges. The purpose of this paper was to describe the initial recruitment of the first 25 participants and delineate the challenges and successes associated with implementation of this intervention. Overall the intervention was implemented as intended and recruitment rates were consistent with other studies. Most patients were female, white and on average 79 years of age. Optimizing physical activity of patients was a low priority for the nurses with patient safety taking precedence. Patients spent most of the time in bed. Age, depression and tethering were the only factors that were associated with physical activity and functional outcomes of patients. Ongoing work is needed to keep patients physically active in the immediate post trauma recovery period. PMID:26547682
IpexT: Integrated Planning and Execution for Military Satellite Tele-Communications
NASA Technical Reports Server (NTRS)
Plaunt, Christian; Rajan, Kanna
2004-01-01
The next generation of military communications satellites may be designed as a fast packet-switched constellation of spacecraft able to withstand substantial bandwidth capacity fluctuation in the face of dynamic resource utilization and rapid environmental changes including jamming of communication frequencies and unstable weather phenomena. We are in the process of designing an integrated scheduling and execution tool which will aid in the analysis of the design parameters needed for building such a distributed system for nominal and battlefield communications. This paper discusses the design of such a system based on a temporal constraint posting planner/scheduler and a smart executive which can cope with a dynamic environment to make a more optimal utilization of bandwidth than the current circuit switched based approach.
Thermal Property Parameter Estimation of TPS Materials
NASA Technical Reports Server (NTRS)
Maddren, Jesse
1998-01-01
Accurate knowledge of the thermophysical properties of TPS (thermal protection system) materials is necessary for pre-flight design and post-flight data analysis. Thermal properties, such as thermal conductivity and the volumetric specific heat, can be estimated from transient temperature measurements using non-linear parameter estimation methods. Property values are derived by minimizing a functional of the differences between measured and calculated temperatures. High temperature thermal response testing of TPS materials is usually done in arc-jet or radiant heating facilities which provide a quasi one-dimensional heating environment. Last year, under the NASA-ASEE-Stanford Fellowship Program, my work focused on developing a radiant heating apparatus. This year, I have worked on increasing the fidelity of the experimental measurements, optimizing the experimental procedures and interpreting the data.
iCLIP: protein-RNA interactions at nucleotide resolution.
Huppertz, Ina; Attig, Jan; D'Ambrogio, Andrea; Easton, Laura E; Sibley, Christopher R; Sugimoto, Yoichiro; Tajnik, Mojca; König, Julian; Ule, Jernej
2014-02-01
RNA-binding proteins (RBPs) are key players in the post-transcriptional regulation of gene expression. Precise knowledge about their binding sites is therefore critical to unravel their molecular function and to understand their role in development and disease. Individual-nucleotide resolution UV crosslinking and immunoprecipitation (iCLIP) identifies protein-RNA crosslink sites on a genome-wide scale. The high resolution and specificity of this method are achieved by an intramolecular cDNA circularization step that enables analysis of cDNAs that truncated at the protein-RNA crosslink sites. Here, we describe the improved iCLIP protocol and discuss critical optimization and control experiments that are required when applying the method to new RBPs. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.
Eck, Michael; Krueger, Michael
2016-01-01
In this publication we show that the procedure to synthesize nanocrystals and the post-synthetic nanocrystal ligand sphere treatment have a great influence not only on the immediate performance of hybrid bulk heterojunction solar cells, but also on their thermal, long-term, and air stability. We herein demonstrate this for the particular case of spherical CdSe nanocrystals, post-synthetically treated with a hexanoic acid based treatment. We observe an influence from the duration of this post-synthetic treatment on the nanocrystal ligand sphere size, and also on the solar cell performance. By tuning the post-synthetic treatment to a certain degree, optimal device performance can be achieved. Moreover, we show how to effectively adapt the post-synthetic nanocrystal treatment protocol to different nanocrystal synthesis batches, hence increasing the reproducibility of hybrid nanocrystal:polymer bulk-heterojunction solar cells, which usually suffers due to the fluctuations in nanocrystal quality of different synthesis batches and synthesis procedures. PMID:28335243
NASA Astrophysics Data System (ADS)
Zhu, Jun; Zhang, David Wei; Kuo, Chinte; Wang, Qing; Wei, Fang; Zhang, Chenming; Chen, Han; He, Daquan; Hsu, Stephen D.
2017-07-01
As technology node shrinks, aggressive design rules for contact and other back end of line (BEOL) layers continue to drive the need for more effective full chip patterning optimization. Resist top loss is one of the major challenges for 28 nm and below technology nodes, which can lead to post-etch hotspots that are difficult to predict and eventually degrade the process window significantly. To tackle this problem, we used an advanced programmable illuminator (FlexRay) and Tachyon SMO (Source Mask Optimization) platform to make resistaware source optimization possible, and it is proved to greatly improve the imaging contrast, enhance focus and exposure latitude, and minimize resist top loss thus improving the yield.
Wiseman-Hakes, Catherine; Murray, Brian; Moineddin, Rahim; Rochon, Elizabeth; Cullen, Nora; Gargaro, Judith; Colantonio, Angela
2013-01-01
To longitudinally examine objective and self-reported outcomes for recovery of cognition, communication, mood and participation in adults with traumatic brain injury (TBI) and co-morbid post-traumatic sleep/wake disorders. Prospective, longitudinal, single blind outcome study. Community-based. Ten adults with moderate-severe TBI and two adults with mild TBI and persistent symptoms aged 18-58 years. Six males and six females, who were 1-22 years post-injury and presented with self-reported sleep/wake disturbances with onset post-injury. Individualized treatments for sleep/wake disorders that included sleep hygiene recommendations, pharmacological interventions and/or treatments for sleep apnea with follow-up. Insomnia Severity Index, Beck Depression and Anxiety Inventories, Latrobe Communication Questionnaire, Speed and Capacity of Language Processing, Test of Everyday Attention, Repeatable Battery for the Assessment of Neuropsychological Status, Daily Cognitive-Communication and Sleep Profile. Group analysis revealed positive trends in change for each measure and across sub-tests of all measures. Statistically significant changes were noted in insomnia severity, p = 0.0003; depression severity, p = 0.03; language, p = 0.01; speed of language processing, p = 0.007. These results add to a small but growing body of evidence that sleep/wake disorders associated with TBI exacerbate trauma-related cognitive, communication and mood impairments. Treatment for sleep/wake disorders may optimize recovery and outcomes.
Janssens, Sandra; Chokoshvili, Davit; Vears, Danya F; De Paepe, Anne; Borry, Pascal
2017-08-01
Carrier screening is generally performed with the aim of identifying healthy couples at risk of having a child affected with a monogenic disorder to provide them with reproductive options. Expanded carrier screening (ECS), which provides the opportunity for multiple conditions to be screened in one test, offers a more cost-effective and comprehensive option than screening for single disorders. However, implementation of ECS at a population level would have implications for genetic counseling practice. We conducted semi-structured interviews with sixteen European clinical and molecular geneticists with expertise in carrier screening to explore their views on the implementation of ECS in the clinical setting. Using inductive content analysis, we identified content categories relevant to the pre- and post-test settings. Participants believed ECS would ideally be targeted at couples before pregnancy. There was some disagreement regarding the acceptability of performing ECS in individuals, with several participants actively opposing individual-based screening. In addition, participants discussed the importance of ensuring informed and voluntary participation in ECS, recommending measures to minimize external pressure on prospective parents to undergo testing. A need for adequate counseling to foster informed, autonomous reproductive decision-making and provide support for couples found to be at risk was emphasized. Practical challenges in optimizing pre-test education and post-test counseling should not be underestimated and they should be carefully addressed before implementing ECS in the clinical setting.
Pulmonary imaging after stereotactic radiotherapy—does RECIST still apply?
Mattonen, Sarah A; Ward, Aaron D
2016-01-01
The use of stereotactic ablative radiotherapy (SABR) for the treatment of primary lung cancer and metastatic disease is rapidly increasing. However, the presence of benign fibrotic changes on CT imaging makes response assessment following SABR a challenge, as these changes develop with an appearance similar to tumour recurrence. Misclassification of benign fibrosis as local recurrence has resulted in unnecessary interventions, including biopsy and surgical resection. Response evaluation criteria in solid tumours (RECIST) are widely used as a universal set of guidelines to assess tumour response following treatment. However, in the context of non-spherical and irregular post-SABR fibrotic changes, the RECIST criteria can have several limitations. Positron emission tomography can also play a role in response assessment following SABR; however, false-positive results in regions of inflammatory lung post-SABR can be a major clinical issue and optimal standardized uptake values to distinguish fibrosis and recurrence have not been determined. Although validated CT high-risk features show a high sensitivity and specificity for predicting recurrence, most recurrences are not detected until more than 1-year post-treatment. Advanced quantitative radiomic analysis on CT imaging has demonstrated promise in distinguishing benign fibrotic changes from local recurrence at earlier time points, and more accurately, than physician assessment. Overall, the use of RECIST alone may prove inferior to novel metrics of assessing response. PMID:27245137
Morgenstern, Lewis B.; Sánchez, Brisa N.; Skolarus, Lesli E.; Garcia, Nelda; Risser, Jan M.H.; Wing, Jeffrey J.; Smith, Melinda A.; Zahuranec, Darin B.; Lisabeth, Lynda D.
2011-01-01
Background and Purpose We sought to describe the association of spirituality, optimism, fatalism and depressive symptoms with initial stroke severity, stroke recurrence and post-stroke mortality. Methods Stroke cases June 2004–December 2008 were ascertained in Nueces County, Texas. Patients without aphasia were queried on their recall of depressive symptoms, fatalism, optimism, and non-organizational spirituality before stroke using validated scales. The association between scales and stroke outcomes was studied using multiple linear regression with log-transformed NIHSS and Cox proportional hazards regression for recurrence and mortality. Results 669 patients participated, 48.7% were women. In fully adjusted models, an increase in fatalism from the first to third quartile was associated with all-cause mortality (HR=1.41, 95%CI: 1.06, 1.88), marginally associated with risk of recurrence (HR=1.35, 95%CI: 0.97, 1.88), but not stroke severity. Similarly, an increase in depressive symptoms was associated with increased mortality (HR=1.32, 95%CI: 1.02, 1.72), marginally associated with stroke recurrence (HR=1.22, CI: 0.93, 1.62), and with a 9.0% increase in stroke severity (95%CI: 0.01, 18.0). Depressive symptoms altered the fatalism-mortality association such that the association of fatalism and mortality was more pronounced for patients reporting no depressive symptoms. Neither spirituality nor optimism conferred a significant effect on stroke severity, recurrence or mortality. Conclusions Among patients who have already had a stroke, self-described pre-stroke depressive symptoms and fatalism, but not optimism or spirituality, are associated with increased risk of stroke recurrence and mortality. Unconventional risk factors may explain some of the variability in stroke outcomes observed in populations, and may be novel targets for intervention. PMID:21940963
NASA Astrophysics Data System (ADS)
Tamimi, E.; Ebadi, H.; Kiani, A.
2017-09-01
Automatic building detection from High Spatial Resolution (HSR) images is one of the most important issues in Remote Sensing (RS). Due to the limited number of spectral bands in HSR images, using other features will lead to improve accuracy. By adding these features, the presence probability of dependent features will be increased, which leads to accuracy reduction. In addition, some parameters should be determined in Support Vector Machine (SVM) classification. Therefore, it is necessary to simultaneously determine classification parameters and select independent features according to image type. Optimization algorithm is an efficient method to solve this problem. On the other hand, pixel-based classification faces several challenges such as producing salt-paper results and high computational time in high dimensional data. Hence, in this paper, a novel method is proposed to optimize object-based SVM classification by applying continuous Ant Colony Optimization (ACO) algorithm. The advantages of the proposed method are relatively high automation level, independency of image scene and type, post processing reduction for building edge reconstruction and accuracy improvement. The proposed method was evaluated by pixel-based SVM and Random Forest (RF) classification in terms of accuracy. In comparison with optimized pixel-based SVM classification, the results showed that the proposed method improved quality factor and overall accuracy by 17% and 10%, respectively. Also, in the proposed method, Kappa coefficient was improved by 6% rather than RF classification. Time processing of the proposed method was relatively low because of unit of image analysis (image object). These showed the superiority of the proposed method in terms of time and accuracy.
Is death anxiety more closely linked with optimism or pessimism among older adults?
Barnett, Michael D; Anderson, Ellen A; Marsden, Arthur D
2018-05-18
The purpose of this study was to investigate whether death anxiety is more closely linked with optimism or pessimism among older adults. Participants consisted of community-dwelling older adults (N = 253; 73.1% female) in the southern U.S. Both optimism and pessimism demonstrated a bivariate association with death anxiety; however, when considering optimism and pessimism together-and after controlling for age, gender, physical health, and mental health-optimism was not associated with death anxiety, while pessimism was associated with higher death anxiety. Post hoc analyses found a unique relationship between pessimism and greater fear of the unknown. Perhaps, given the inevitability of death, limiting negative expectancies is more salient to death anxiety than having positive expectancies, and pessimism may be particularly associated with existential and religious concerns. Copyright © 2018 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Zeyl, Timothy; Yin, Erwei; Keightley, Michelle; Chau, Tom
2016-04-01
Objective. Error-related potentials (ErrPs) have the potential to guide classifier adaptation in BCI spellers, for addressing non-stationary performance as well as for online optimization of system parameters, by providing imperfect or partial labels. However, the usefulness of ErrP-based labels for BCI adaptation has not been established in comparison to other partially supervised methods. Our objective is to make this comparison by retraining a two-step P300 speller on a subset of confident online trials using naïve labels taken from speller output, where confidence is determined either by (i) ErrP scores, (ii) posterior target scores derived from the P300 potential, or (iii) a hybrid of these scores. We further wish to evaluate the ability of partially supervised adaptation and retraining methods to adjust to a new stimulus-onset asynchrony (SOA), a necessary step towards online SOA optimization. Approach. Eleven consenting able-bodied adults attended three online spelling sessions on separate days with feedback in which SOAs were set at 160 ms (sessions 1 and 2) and 80 ms (session 3). A post hoc offline analysis and a simulated online analysis were performed on sessions two and three to compare multiple adaptation methods. Area under the curve (AUC) and symbols spelled per minute (SPM) were the primary outcome measures. Main results. Retraining using supervised labels confirmed improvements of 0.9 percentage points (session 2, p < 0.01) and 1.9 percentage points (session 3, p < 0.05) in AUC using same-day training data over using data from a previous day, which supports classifier adaptation in general. Significance. Using posterior target score alone as a confidence measure resulted in the highest SPM of the partially supervised methods, indicating that ErrPs are not necessary to boost the performance of partially supervised adaptive classification. Partial supervision significantly improved SPM at a novel SOA, showing promise for eventual online SOA optimization.
Defining the optimal cut-off values for liver enzymes in diagnosing blunt liver injury.
Koyama, Tomohide; Hamada, Hirohisa; Nishida, Masamichi; Naess, Paal A; Gaarder, Christine; Sakamoto, Tetsuya
2016-01-25
Patients with blunt trauma to the liver have elevated levels of liver enzymes within a short time post injury, potentially useful in screening patients for computed tomography (CT). This study was performed to define the optimal cut-off values for serum aspartate aminotransferase (AST) and alanine aminotransferase (ALT) in patients with blunt liver injury diagnosed with contrast enhanced multi detector-row CT (CE-MDCT). All patients admitted from May 2006 to July 2013 to Teikyo University Hospital Trauma and Critical Care Center, and who underwent abdominal CE-MDCT within 3 h after blunt trauma, were retrospectively enrolled. Using receiver operating characteristic (ROC) curve analysis, the optimal cut-off values for AST and ALT were defined, and sensitivity and specificity were calculated. Of a total of 676 blunt trauma patients 64 patients were diagnosed with liver injury (Group LI+) and 612 patients without liver injury (Group LI-). Group LI+ and LI- were comparable for age, Revised Trauma Score, and Probability of survival. The groups differed in Injury Severity Score [median 21 (interquartile range 9-33) vs. 17 (9-26) (p < 0.01)]. Group LI+ had higher AST than LI- [276 (48-503) vs. 44 (16-73); p < 0.001] and higher ALT [240 (92-388) vs. 32 (16-49); p < 0.001]. Using ROC curve analysis, the optimal cut-off values for AST and ALT were set at 109 U/l and 97 U/l, respectively. Based on these values, AST ≥ 109 U/l had a sensitivity of 81%, a specificity of 82%, a positive predictive value of 32%, and a negative predictive value of 98%. The corresponding values for ALT ≥ 97 U/l were 78, 88, 41 and 98%, respectively, and for the combination of AST ≥ 109 U/l and/or ALT ≥ 97 U/l were 84, 81, 32, 98%, respectively. We have identified AST ≥ 109 U/l and ALT ≥ 97 U/l as optimal cut-off values in predicting the presence of liver injury, potentially useful as a screening tool for CT scan in patients otherwise eligible for observation only or as a transfer criterion to a facility with CT scan capability.
Motealleh, Behrooz; Zahedi, Payam; Rezaeian, Iraj; Moghimi, Morvarid; Abdolghaffari, Amir Hossein; Zarandi, Mohammad Amin
2014-07-01
For the first time, it has been tried to achieve optimum conditions for electrospun poly(ε-caprolactone)/polystyrene (PCL/PS) nanofibrous samples as active wound dressings containing chamomile via D-optimal design approach. In this work, systematic in vitro and in vivo studies were carried out by drug release rate, antibacterial and antifungal evaluations, cell culture, and rat wound model along with histology observation. The optimized samples were prepared under the following electrospinning conditions: PCL/PS ratio (65/35), PCL concentration 9%(w/v), PS concentration 14%(w/v), distance between the syringe needle tip and the collector 15.5 cm, applied voltage 18 kV, and solution flow rate 0.46 mL h(-1) . The FE-SEM micrographs showed electrospun PCL/PS (65/35) nanofibrous sample containing 15% chamomile had a minimum average diameter (∼175 nm) compared to the neat samples (∼268 nm). The drug released resulted in a gradual and high amount of chamomile from the optimized PCL/PS nanofibrous sample (∼70%) in respect to PCL and PS nanofibers after 48 h. This claim was also confirmed by antibacterial and antifungal evaluations in which an inhibitory zone with a diameter of about 7.6 mm was formed. The rat wound model results also indicated that the samples loaded with 15% chamomile extract were remarkably capable to heal the wounds up to 99 ± 0.5% after 14 days post-treatment periods. The adhesion of mesenchymal stem cells and their viability on the optimized samples were confirmed by MTT analysis. Also, the electrospun nanofibrous mats based on PCL/PS (65/35) showed a high efficiency in the wound closure and healing process compared to the reference sample, PCL/PS nanofibers without chamomile. Finally, the histology analysis revealed that the formation of epithelial tissues, the lack of necrosis and collagen fibers accumulation in the dermis tissues for the above optimized samples. © 2013 Wiley Periodicals, Inc.
Labor and skills gap analysis of the biomedical research workforce.
Mason, Julie L; Johnston, Elizabeth; Berndt, Sam; Segal, Katie; Lei, Ming; Wiest, Jonathan S
2016-08-01
The United States has experienced an unsustainable increase of the biomedical research workforce over the past 3 decades. This expansion has led to a myriad of consequences, including an imbalance in the number of researchers and available tenure-track faculty positions, extended postdoctoral training periods, increasing age of investigators at first U.S. National Institutes of Health R01 grant, and exodus of talented individuals seeking careers beyond traditional academe. Without accurate data on the biomedical research labor market, challenges will remain in resolving these problems and in advising trainees of viable career options and the skills necessary to be productive in their careers. We analyzed workforce trends, integrating both traditional labor market information and real-time job data. We generated a profile of the current biomedical research workforce, performed labor gap analyses of occupations in the workforce at regional and national levels, and assessed skill transferability between core and complementary occupations. We conclude that although supply into the workforce and the number of job postings for occupations within that workforce have grown over the past decade, supply continues to outstrip demand. Moreover, we identify practical skill sets from real-time job postings to optimally equip trainees for an array of careers to effectively meet future workforce demand.-Mason, J. L., Johnston, E., Berndt, S., Segal, K., Lei, M., Wiest, J. S. Labor and skills gap analysis of the biomedical research workforce. © FASEB.
Labor and skills gap analysis of the biomedical research workforce
Mason, Julie L.; Johnston, Elizabeth; Berndt, Sam; Segal, Katie; Lei, Ming; Wiest, Jonathan S.
2016-01-01
The United States has experienced an unsustainable increase of the biomedical research workforce over the past 3 decades. This expansion has led to a myriad of consequences, including an imbalance in the number of researchers and available tenure-track faculty positions, extended postdoctoral training periods, increasing age of investigators at first U.S. National Institutes of Health R01 grant, and exodus of talented individuals seeking careers beyond traditional academe. Without accurate data on the biomedical research labor market, challenges will remain in resolving these problems and in advising trainees of viable career options and the skills necessary to be productive in their careers. We analyzed workforce trends, integrating both traditional labor market information and real-time job data. We generated a profile of the current biomedical research workforce, performed labor gap analyses of occupations in the workforce at regional and national levels, and assessed skill transferability between core and complementary occupations. We conclude that although supply into the workforce and the number of job postings for occupations within that workforce have grown over the past decade, supply continues to outstrip demand. Moreover, we identify practical skill sets from real-time job postings to optimally equip trainees for an array of careers to effectively meet future workforce demand.—Mason, J. L., Johnston, E., Berndt, S., Segal, K., Lei, M., Wiest, J. S. Labor and skills gap analysis of the biomedical research workforce. PMID:27075242
Gregg, Chelsea L.; Butcher, Jonathan T.
2016-01-01
Background Gestationally survivable congenital malformations arise during mid-late stages of development that are inaccessible in vivo with traditional optical imaging for assessing long term abnormal patterning. MicroCT is an attractive technology to rapidly and inexpensively generate quantitative 3D datasets but requires exogenous contrast media. Here we establish dose dependent toxicity, persistence, and biodistribution of three different metallic nanoparticles in day 4 chick embryos. Results We determined that 110nm alkaline earth metal particles were non-toxic and persisted in the chick embryo for up to 24 hours post injection with contrast enhancement levels at high as 1600HU. 15nm gold nanoparticles persisted with x-ray attenuation higher than that of the surrounding yolk and albumen for up to 8 hours post injection, while 1.9nm particles resulted in lethality by 8 hours. We identified spatial and temporally heterogeneous contrast enhancement ranging from 250-1600HU. With the most optimal 110nm alkaline earth metal particles, we quantified an exponential increase in the tissue perfusion versus distance from the dorsal aorta into the flank over 8 hours with a peak perfusion rate of 0.7um2/s measured at a distance of 0.3mm. Conclusion These results demonstrate the safety, efficacy, and opportunity of nanoparticle based contrast media in live embryos for quantitative analysis of embryogenesis. PMID:27447729
Kwan, M K; Chan, C Y W
2016-10-01
To investigate whether an optimal upper instrumented vertebra (UIV) tilt angle would prevent 'lateral' shoulder imbalance or neck tilt (with 'medial' shoulder imbalance) post-operatively. The mean follow-up for 60 AIS (Lenke 1 and Lenke 2) patients was 49.3 ± 8.4 months. Optimal UIV tilt angle was calculated from the cervical supine side bending radiographs. Lateral shoulder imbalance was graded using the clinical shoulder grading. The clinical neck tilt grading was as follows: Grade 0: no neck tilt, Grade 1: actively correctable neck tilt, Grade 2: neck tilt that cannot be corrected by active contraction and Grade 3: severe neck tilt with trapezial asymmetry >1 cm. T1 tilt, clavicle angle and cervical axis were measured. UIVDiff (difference between post-operative UIV tilt and pre-operative Optimal UIV tilt) and the reserve motion of the UIV were correlated with the outcome measures. Patients were assessed at 6 weeks and at final follow-up with a minimum follow-up duration of 24 months. Among patients with grade 0 neck tilt, 88.2 % of patients had the UIV tilt angle within the reserve motion range. This percentage dropped to 75.0 % in patients with grade 1 neck tilt whereas in patients with grade 2 and grade 3 neck tilt, the percentage dropped further to 22.2 and 20.0 % (p = 0.000). The occurrence of grade 2 and 3 neck tilt when UIVDiff was <5°, 5-10° and >10° was 9.5, 50.0 and 100.0 %, respectively (p = 0.005). UIVDiff and T1 tilt had a positive and strong correlation (r 2 = 0.618). However, UIVDiff had poor correlation with clavicle angle and the lateral shoulder imbalance. An optimal UIV tilt might prevent neck tilt with 'medial' shoulder imbalance due to trapezial prominence and but not 'lateral' shoulder imbalance.
2015-09-24
algorithms for solving real- world problems. Within the past five years, 2 books, 5 journal special issues, and about 60 papers have been published...Four international conferences have been organized, including the 3rd World Congress of Global Optimization. A unified methodology and algorithm have...been developed with real- world applications. This grant has been used to support and co-support three post-doctors, three PhD students, one part
Yang, Shihua; Ping, Shuhuang; Si, Wei; He, Xiechao; Wang, Xinyi; Lu, Yongqing; Ji, Shaohui; Niu, Yuyu; Ji, Weizhi
2011-06-01
Ethylene glycol (EG) has been speculated to be the most appropriate penetrating cryoprotectant for cryopreservation of rhesus macaque sperm due to its higher permeability coefficient. The present study aimed to determine the optimal EG concentration, freezing rate and holding time in liquid nitrogen (LN(2)) vapor for rhesus sperm cryopreservation. Among six tested EG concentrations (0, 0.18, 0.35, 0.7, 1.4 and 2.1 M), 0.7 M EG showed the most effective cryoprotection (P<0.05). Sperm frozen with 0.7 M EG at -183°C/min showed higher post-thaw motility than sperm frozen at -10, -67 or -435°C/min (P<0.05). Sperm frozen in LN(2) vapor at -183°C/min with 0.7 M EG and a holding time of 10 min showed higher post-thaw motility compared with a holding time of 5 or 15 min (P<0.05). The function of sperm cryopreserved at the optimized EG concentration, freezing rate and holding time was further evaluated by in vitro fertilization. Of the 36 oocytes collected from gonadotropin-stimulated rhesus macaques, 61.1% were fertilized, and 61.1, 44.4 and 36.1% of the oocytes developed to 2 cells, morulae and blastocysts, respectively. Our findings provide an alternative penetrating cryoprotectant and optimal protocol for genetic preservation purposes in this important species.
NASA Astrophysics Data System (ADS)
Baik, Ki-Ho; Dean, Robert L.; Mueller, Mark; Lu, Maiying; Lem, Homer Y.; Osborne, Stephen; Abboud, Frank E.
2002-07-01
A chemically amplified resist (CAR) process has been recognized as an approach to meet the demanding critical dimension (CD) specifications of 100nm node technology and beyond. Recently, significant effort has been devoted to optimizing CAR materials, which offer the characteristics required for next generation photomask fabrication. In this paper, a process established with a positive-tone CAR from TOK and 50kV MEBES eXara system is discussed. This resist is developed for raster scan 50 kV e-beam systems. It has high contrast, good coating characteristics, good dry etch selectivity, and high environmental stability. The coating process is conducted in an environment with amine concentration less than 2 ppb. A nitrogen environment is provided during plate transfer steps. Resolution using a 60nm writing grid is 90nm line and space patterns. CD linearity is maintained down to 240nm for isolated lines or spaces by applying embedded proximity effect correction (emPEC). Optimizations of post-apply bake (PAB) and post-expose bake (PEB) time, temperature, and uniformity are completed to improve adhesion, coating uniformity, and resolution. A puddle develop process is optimized to improve line edge roughness, edge slope, and resolution. Dry etch process is optimized on a TetraT system to transfer the resist image into the chrome layer with minimum etch bias.
Preparation of Highly Conductive Yarns by an Optimized Impregnation Process
NASA Astrophysics Data System (ADS)
Amba Sankar, K. N.; Mohanta, Kallol
2017-12-01
We report the development of the electrical conductivity in textile yarns through impregnation and post-treatment of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The conductive polymer is deposited on fibers, which fills the gap space within the hierarchical structure of the yarns. Organic nonpolar solvents act as reducing agent to increase the density of PEDOT moieties on the yarns, galvanizing increment in conductivity values. Post-treatment by ethylene glycol transforms the resonance configuration of the conductive moieties of conjugated polymer, which helps in further enhancement of electrical conductivity of the yarns. We have optimized the method in terms of loading and conformal change of the polymer to have a lesser resistance of the coated conductive yarns. The minimum resistance achieved has a value of 77 Ωcm-1. This technique of developing conductivity in conventional yarns enables retaining the flexibility of yarns and feeling of softness which would find suitable applications for wearable electronics.
Preparation of Highly Conductive Yarns by an Optimized Impregnation Process
NASA Astrophysics Data System (ADS)
Amba Sankar, K. N.; Mohanta, Kallol
2018-03-01
We report the development of the electrical conductivity in textile yarns through impregnation and post-treatment of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The conductive polymer is deposited on fibers, which fills the gap space within the hierarchical structure of the yarns. Organic nonpolar solvents act as reducing agent to increase the density of PEDOT moieties on the yarns, galvanizing increment in conductivity values. Post-treatment by ethylene glycol transforms the resonance configuration of the conductive moieties of conjugated polymer, which helps in further enhancement of electrical conductivity of the yarns. We have optimized the method in terms of loading and conformal change of the polymer to have a lesser resistance of the coated conductive yarns. The minimum resistance achieved has a value of 77 Ωcm-1. This technique of developing conductivity in conventional yarns enables retaining the flexibility of yarns and feeling of softness which would find suitable␣applications for wearable electronics.
Prenatal yoga in late pregnancy and optimism, power, and well-being.
Reis, Pamela J; Alligood, Martha R
2014-01-01
The study reported here explored changes in optimism, power, and well-being over time in women who participated in a six-week prenatal yoga program during their second and third trimesters of pregnancy. The study was conceptualized from the perspective of Rogers' science of unitary human beings. A correlational, one-group, pre-post-assessment survey design with a convenience sample was conducted. Increases in mean scores for optimism, power, and well-being were statistically significant from baseline to completion of the prenatal yoga program. Findings from this study suggested that yoga as a self-care practice that nurses might recommend to promote well-being in pregnant women.
A high plant density reduces the ability of maize to use soil nitrogen
Yan, Peng; Pan, Junxiao; Zhang, Wenjie; Shi, Junfang; Chen, Xinping; Cui, Zhenling
2017-01-01
Understanding the physiological changes associated with high grain yield and high N use efficiency (NUE) is important when increasing the plant density and N rate to develop optimal agronomic management. We tested the hypothesis that high plant densities resulting in crowding stress reduce the ability of plants to use the N supply post-silking, thus decreasing the grain yield and NUE. In 2013 and 2014, a field experiment, with five N-application rates and three plant densities (6.0, 7.5, and 9.0 plants m–2), was conducted in the North China Plain (NCP). The calculated maximum grain yield and agronomic use efficiency (AEN) at a density of 7.5 plants m–2 were 12.4 Mg ha–1 and 39.3 kg kg–1, respectively, which were significantly higher than the values obtained at densities of 6.0 (11.3 Mg ha–1 and 30.2 kg kg–1) and 9.0 plant m–2 (11.7 Mg ha–1 and 27.8 kg kg–1). A high plant density of 9.0 plants m–2 decreased the post-silking N accumulation, leaf N concentration and net photosynthesis, which reduced the post-silking dry matter production, resulting in a low yield and NUE. Although a relatively low grain yield was observed at a density of 9.0 plants m–2, the optimal N rate increased from 150 to 186 kg N ha-1 at a density of 7.5 plants m–2. These results indicate that high plant densities with crowding stress reduce the ability of plants to use soil N during the post-silking period, and high rate of N fertilizer was needed to increase grain yield. We conclude that selecting the appropriate plant density combined with optimal N management could increase grain yields and the NUE in the NCP. PMID:28234970
Lam, D L; Mitsumori, L M; Neligan, P C; Warren, B H; Shuman, W P; Dubinsky, T J
2012-12-01
Autologous breast reconstructive surgery with deep inferior epigastric artery (DIEA) perforator flaps has become the mainstay for breast reconstructive surgery. CT angiography and three-dimensional image post processing can depict the number, size, course and location of the DIEA perforating arteries for the pre-operative selection of the best artery to use for the tissue flap. Knowledge of the location and selection of the optimal perforating artery shortens operative times and decreases patient morbidity.
Williams, Perry J.; Kendall, William L.
2017-01-01
Choices in ecological research and management are the result of balancing multiple, often competing, objectives. Multi-objective optimization (MOO) is a formal decision-theoretic framework for solving multiple objective problems. MOO is used extensively in other fields including engineering, economics, and operations research. However, its application for solving ecological problems has been sparse, perhaps due to a lack of widespread understanding. Thus, our objective was to provide an accessible primer on MOO, including a review of methods common in other fields, a review of their application in ecology, and a demonstration to an applied resource management problem.A large class of methods for solving MOO problems can be separated into two strategies: modelling preferences pre-optimization (the a priori strategy), or modelling preferences post-optimization (the a posteriori strategy). The a priori strategy requires describing preferences among objectives without knowledge of how preferences affect the resulting decision. In the a posteriori strategy, the decision maker simultaneously considers a set of solutions (the Pareto optimal set) and makes a choice based on the trade-offs observed in the set. We describe several methods for modelling preferences pre-optimization, including: the bounded objective function method, the lexicographic method, and the weighted-sum method. We discuss modelling preferences post-optimization through examination of the Pareto optimal set. We applied each MOO strategy to the natural resource management problem of selecting a population target for cackling goose (Branta hutchinsii minima) abundance. Cackling geese provide food security to Native Alaskan subsistence hunters in the goose's nesting area, but depredate crops on private agricultural fields in wintering areas. We developed objective functions to represent the competing objectives related to the cackling goose population target and identified an optimal solution first using the a priori strategy, and then by examining trade-offs in the Pareto set using the a posteriori strategy. We used four approaches for selecting a final solution within the a posteriori strategy; the most common optimal solution, the most robust optimal solution, and two solutions based on maximizing a restricted portion of the Pareto set. We discuss MOO with respect to natural resource management, but MOO is sufficiently general to cover any ecological problem that contains multiple competing objectives that can be quantified using objective functions.
NASA Astrophysics Data System (ADS)
Li, Jinquan; Zhou, Zijian; Feng, Jianghua; Cai, Shuhui; Gao, Jinhao; Chen, Zhong
2014-05-01
MnO-embedded iron oxide nanoparticles (MnIO-NPs) can be treated as potential dual-modal contrast agents. However, their overall bio-effects and potential toxicity remain unknown. In this study, the metabolic effects of MnIO-NPs (dosed at 1 and 5 mg Fe/kg) on Sprague-Dawley rats were investigated using metabonomic analysis, histopathological examination, and conventional biochemical analysis. The histological changes included a focal inflammation in the liver at high-dose and a slightly enlarged area of splenic white pulp after 48 h post-dose. Blood biochemical analysis showed that albumin, globulins, aspartate aminotransferase, lactate dehydrogenase, blood urea nitrogen, and glucose changed distinctly compared to the control. The metabonomic analysis of body fluids (serum and urine) and tissues (liver, kidney, and spleen) indicated that MnIO-NPs induced metabolic perturbation in rats including energy, nucleotides, amino acids and phospholipid metabolisms. Besides, the variations of supportive nutrients: valine, leucine, isoleucine, nicotinamide adenine dinucleotide (phosphate), and nicotinamide, and the conjugation substrates: glycine, taurine, glutamine, glutathione, and methyl donors (formate, sarcosine, dimethylglycine, choline, and betaine) were involved in detoxification reaction of MnIO-NPs. The obtained information would provide identifiable ground for the candidate selection and optimization.
NASA Astrophysics Data System (ADS)
Bell, Stephen C.; Ginsburg, Marc A.; Rao, Prabhakara P.
An important part of space launch vehicle mission planning for a planetary mission is the integrated analysis of guidance and performance dispersions for both booster and upper stage vehicles. For the Mars Observer mission, an integrated trajectory analysis was used to maximize the scientific payload and to minimize injection errors by optimizing the energy management of both vehicles. This was accomplished by designing the Titan III booster vehicle to inject into a hyperbolic departure plane, and the Transfer Orbit Stage (TOS) to correct any booster dispersions. An integrated Monte Carlo analysis of the performance and guidance dispersions of both vehicles provided sensitivities, an evaluation of their guidance schemes and an injection error covariance matrix. The polynomial guidance schemes used for the Titan III variable flight azimuth computations and the TOS solid rocket motor ignition time and burn direction derivations accounted for a wide variation of launch times, performance dispersions, and target conditions. The Mars Observer spacecraft was launched on 25 September 1992 on the Titan III/TOS vehicle. The post flight analysis indicated that a near perfect park orbit injection was achieved, followed by a trans-Mars injection with less than 2sigma errors.
PSO-SVM-Based Online Locomotion Mode Identification for Rehabilitation Robotic Exoskeletons.
Long, Yi; Du, Zhi-Jiang; Wang, Wei-Dong; Zhao, Guang-Yu; Xu, Guo-Qiang; He, Long; Mao, Xi-Wang; Dong, Wei
2016-09-02
Locomotion mode identification is essential for the control of a robotic rehabilitation exoskeletons. This paper proposes an online support vector machine (SVM) optimized by particle swarm optimization (PSO) to identify different locomotion modes to realize a smooth and automatic locomotion transition. A PSO algorithm is used to obtain the optimal parameters of SVM for a better overall performance. Signals measured by the foot pressure sensors integrated in the insoles of wearable shoes and the MEMS-based attitude and heading reference systems (AHRS) attached on the shoes and shanks of leg segments are fused together as the input information of SVM. Based on the chosen window whose size is 200 ms (with sampling frequency of 40 Hz), a three-layer wavelet packet analysis (WPA) is used for feature extraction, after which, the kernel principal component analysis (kPCA) is utilized to reduce the dimension of the feature set to reduce computation cost of the SVM. Since the signals are from two types of different sensors, the normalization is conducted to scale the input into the interval of [0, 1]. Five-fold cross validation is adapted to train the classifier, which prevents the classifier over-fitting. Based on the SVM model obtained offline in MATLAB, an online SVM algorithm is constructed for locomotion mode identification. Experiments are performed for different locomotion modes and experimental results show the effectiveness of the proposed algorithm with an accuracy of 96.00% ± 2.45%. To improve its accuracy, majority vote algorithm (MVA) is used for post-processing, with which the identification accuracy is better than 98.35% ± 1.65%. The proposed algorithm can be extended and employed in the field of robotic rehabilitation and assistance.
PSO-SVM-Based Online Locomotion Mode Identification for Rehabilitation Robotic Exoskeletons
Long, Yi; Du, Zhi-Jiang; Wang, Wei-Dong; Zhao, Guang-Yu; Xu, Guo-Qiang; He, Long; Mao, Xi-Wang; Dong, Wei
2016-01-01
Locomotion mode identification is essential for the control of a robotic rehabilitation exoskeletons. This paper proposes an online support vector machine (SVM) optimized by particle swarm optimization (PSO) to identify different locomotion modes to realize a smooth and automatic locomotion transition. A PSO algorithm is used to obtain the optimal parameters of SVM for a better overall performance. Signals measured by the foot pressure sensors integrated in the insoles of wearable shoes and the MEMS-based attitude and heading reference systems (AHRS) attached on the shoes and shanks of leg segments are fused together as the input information of SVM. Based on the chosen window whose size is 200 ms (with sampling frequency of 40 Hz), a three-layer wavelet packet analysis (WPA) is used for feature extraction, after which, the kernel principal component analysis (kPCA) is utilized to reduce the dimension of the feature set to reduce computation cost of the SVM. Since the signals are from two types of different sensors, the normalization is conducted to scale the input into the interval of [0, 1]. Five-fold cross validation is adapted to train the classifier, which prevents the classifier over-fitting. Based on the SVM model obtained offline in MATLAB, an online SVM algorithm is constructed for locomotion mode identification. Experiments are performed for different locomotion modes and experimental results show the effectiveness of the proposed algorithm with an accuracy of 96.00% ± 2.45%. To improve its accuracy, majority vote algorithm (MVA) is used for post-processing, with which the identification accuracy is better than 98.35% ± 1.65%. The proposed algorithm can be extended and employed in the field of robotic rehabilitation and assistance. PMID:27598160
Blum, Emily S; Porras, Antonio R; Biggs, Elijah; Tabrizi, Pooneh R; Sussman, Rachael D; Sprague, Bruce M; Shalaby-Rana, Eglal; Majd, Massoud; Pohl, Hans G; Linguraru, Marius George
2017-10-21
We sought to define features that describe the dynamic information in diuresis renograms for the early detection of clinically significant hydronephrosis caused by ureteropelvic junction obstruction. We studied the diuresis renogram of 55 patients with a mean ± SD age of 75 ± 66 days who had congenital hydronephrosis at initial presentation. Five patients had bilaterally affected kidneys for a total of 60 diuresis renograms. Surgery was performed on 35 kidneys. We extracted 45 features based on curve shape and wavelet analysis from the drainage curves recorded after furosemide administration. The optimal features were selected as the combination that maximized the ROC AUC obtained from a linear support vector machine classifier trained to classify patients as with or without obstruction. Using these optimal features we performed leave 1 out cross validation to estimate the accuracy, sensitivity and specificity of our framework. Results were compared to those obtained using post-diuresis drainage half-time and the percent of clearance after 30 minutes. Our framework had 93% accuracy, including 91% sensitivity and 96% specificity, to predict surgical cases. This was a significant improvement over the same accuracy of 82%, including 71% sensitivity and 96% specificity obtained from half-time and 30-minute clearance using the optimal thresholds of 24.57 minutes and 55.77%, respectively. Our machine learning framework significantly improved the diagnostic accuracy of clinically significant hydronephrosis compared to half-time and 30-minute clearance. This aids in the clinical decision making process by offering a tool for earlier detection of severe cases and it has the potential to reduce the number of diuresis renograms required for diagnosis. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Owen, D; Anderson, C; Mayo, C
Purpose: To extend the functionality of a commercial treatment planning system (TPS) to support (i) direct use of quantitative image-based metrics within treatment plan optimization and (ii) evaluation of dose-functional volume relationships to assist in functional image adaptive radiotherapy. Methods: A script was written that interfaces with a commercial TPS via an Application Programming Interface (API). The script executes a program that performs dose-functional volume analyses. Written in C#, the script reads the dose grid and correlates it with image data on a voxel-by-voxel basis through API extensions that can access registration transforms. A user interface was designed through WinFormsmore » to input parameters and display results. To test the performance of this program, image- and dose-based metrics computed from perfusion SPECT images aligned to the treatment planning CT were generated, validated, and compared. Results: The integration of image analysis information was successfully implemented as a plug-in to a commercial TPS. Perfusion SPECT images were used to validate the calculation and display of image-based metrics as well as dose-intensity metrics and histograms for defined structures on the treatment planning CT. Various biological dose correction models, custom image-based metrics, dose-intensity computations, and dose-intensity histograms were applied to analyze the image-dose profile. Conclusion: It is possible to add image analysis features to commercial TPSs through custom scripting applications. A tool was developed to enable the evaluation of image-intensity-based metrics in the context of functional targeting and avoidance. In addition to providing dose-intensity metrics and histograms that can be easily extracted from a plan database and correlated with outcomes, the system can also be extended to a plug-in optimization system, which can directly use the computed metrics for optimization of post-treatment tumor or normal tissue response models. Supported by NIH - P01 - CA059827.« less
Effects of annealing temperature on the H2-sensing properties of Pd-decorated WO3 nanorods
NASA Astrophysics Data System (ADS)
Lee, Sangmin; Lee, Woo Seok; Lee, Jae Kyung; Hyun, Soong Keun; Lee, Chongmu; Choi, Seungbok
2018-03-01
The temperature of the post-annealing treatment carried out after noble metal deposition onto semiconducting metal oxides (SMOs) must be carefully optimized to maximize the sensing performance of the metal-decorated SMO sensors. WO3 nanorods were synthesized by thermal evaporation of WO3 powders and decorated with Pd nanoparticles using a sol-gel method, followed by an annealing process. The effects of the annealing temperature on the hydrogen gas-sensing properties of the Pd-decorated WO3 nanorods were then examined; the optimal annealing temperature, leading to the highest response of the WO3 nanorod sensor to H2, was determined to be 600 °C. Post-annealing at 600 °C resulted in nanorods with the highest surface area-to-volume ratio, as well as in the optimal size and the largest number of deposited Pd nanoparticles, leading to the highest response and the shortest response/recovery times toward H2. The improved H2-sensing performance of the Pd-decorated WO3 nanorod sensor, compared to a sensor based on pristine WO3 nanorods, is attributed to the enhanced catalytic activity, increased surface area-to-volume ratio, and higher amounts of surface defects.
Post-SELEX optimization of aptamers.
Gao, Shunxiang; Zheng, Xin; Jiao, Binghua; Wang, Lianghua
2016-07-01
Aptamers are functional single-stranded DNA or RNA oligonucleotides, selected in vitro by SELEX (Systematic Evolution of Ligands by Exponential Enrichment), which can fold into stable unique three-dimensional structures that bind their target ligands with high affinity and specificity. Although aptamers show a number of favorable advantages such as better stability and easier modification when compared with the properties of antibodies, only a handful of aptamers have entered clinical trials and only one, pegaptanib, has received US Food and Drug Administration approval for clinical use. The main reasons that limit the practical application of aptamers are insufficient nuclease stability, bioavailability, thermal stability, or even affinity. Some aptamers obtained from modified libraries show better properties; however, polymerase amplification of nucleic acids containing non-natural bases is currently a primary drawback of the SELEX process. This review focuses on several post-SELEX optimization strategies of aptamers identified in recent years. We describe four common methods in detail: truncation, chemical modification, bivalent or multivalent aptamer construction, and mutagenesis. We believe that these optimization strategies should improve one or more specific properties of aptamers, and the type of feature(s) selected for improvement will be dependent on the application purpose.
CFD-Based Design Optimization for Single Element Rocket Injector
NASA Technical Reports Server (NTRS)
Vaidyanathan, Rajkumar; Tucker, Kevin; Papila, Nilay; Shyy, Wei
2003-01-01
To develop future Reusable Launch Vehicle concepts, we have conducted design optimization for a single element rocket injector, with overall goals of improving reliability and performance while reducing cost. Computational solutions based on the Navier-Stokes equations, finite rate chemistry, and the k-E turbulence closure are generated with design of experiment techniques, and the response surface method is employed as the optimization tool. The design considerations are guided by four design objectives motivated by the consideration in both performance and life, namely, the maximum temperature on the oxidizer post tip, the maximum temperature on the injector face, the adiabatic wall temperature, and the length of the combustion zone. Four design variables are selected, namely, H2 flow angle, H2 and O2 flow areas with fixed flow rates, and O2 post tip thickness. In addition to establishing optimum designs by varying emphasis on the individual objectives, better insight into the interplay between design variables and their impact on the design objectives is gained. The investigation indicates that improvement in performance or life comes at the cost of the other. Best compromise is obtained when improvements in both performance and life are given equal importance.
NASA Astrophysics Data System (ADS)
O'Hara, Ryan P.; Chand, Arpita; Vidiyala, Sowmya; Arechavala, Stacie M.; Mitsouras, Dimitrios; Rudin, Stephen; Ionita, Ciprian N.
2016-03-01
Complex vascular anatomies can cause the failure of image-guided endovascular procedures. 3D printed patient-specific vascular phantoms provide clinicians and medical device companies the ability to preemptively plan surgical treatments, test the likelihood of device success, and determine potential operative setbacks. This research aims to present advanced mesh manipulation techniques of stereolithographic (STL) files segmented from medical imaging and post-print surface optimization to match physiological vascular flow resistance. For phantom design, we developed three mesh manipulation techniques. The first method allows outlet 3D mesh manipulations to merge superfluous vessels into a single junction, decreasing the number of flow outlets and making it feasible to include smaller vessels. Next we introduced Boolean operations to eliminate the need to manually merge mesh layers and eliminate errors of mesh self-intersections that previously occurred. Finally we optimize support addition to preserve the patient anatomical geometry. For post-print surface optimization, we investigated various solutions and methods to remove support material and smooth the inner vessel surface. Solutions of chloroform, alcohol and sodium hydroxide were used to process various phantoms and hydraulic resistance was measured and compared with values reported in literature. The newly mesh manipulation methods decrease the phantom design time by 30 - 80% and allow for rapid development of accurate vascular models. We have created 3D printed vascular models with vessel diameters less than 0.5 mm. The methods presented in this work could lead to shorter design time for patient specific phantoms and better physiological simulations.
O'Hara, Ryan P; Chand, Arpita; Vidiyala, Sowmya; Arechavala, Stacie M; Mitsouras, Dimitrios; Rudin, Stephen; Ionita, Ciprian N
2016-02-27
Complex vascular anatomies can cause the failure of image-guided endovascular procedures. 3D printed patient-specific vascular phantoms provide clinicians and medical device companies the ability to preemptively plan surgical treatments, test the likelihood of device success, and determine potential operative setbacks. This research aims to present advanced mesh manipulation techniques of stereolithographic (STL) files segmented from medical imaging and post-print surface optimization to match physiological vascular flow resistance. For phantom design, we developed three mesh manipulation techniques. The first method allows outlet 3D mesh manipulations to merge superfluous vessels into a single junction, decreasing the number of flow outlets and making it feasible to include smaller vessels. Next we introduced Boolean operations to eliminate the need to manually merge mesh layers and eliminate errors of mesh self-intersections that previously occurred. Finally we optimize support addition to preserve the patient anatomical geometry. For post-print surface optimization, we investigated various solutions and methods to remove support material and smooth the inner vessel surface. Solutions of chloroform, alcohol and sodium hydroxide were used to process various phantoms and hydraulic resistance was measured and compared with values reported in literature. The newly mesh manipulation methods decrease the phantom design time by 30 - 80% and allow for rapid development of accurate vascular models. We have created 3D printed vascular models with vessel diameters less than 0.5 mm. The methods presented in this work could lead to shorter design time for patient specific phantoms and better physiological simulations.
O’Hara, Ryan P.; Chand, Arpita; Vidiyala, Sowmya; Arechavala, Stacie M.; Mitsouras, Dimitrios; Rudin, Stephen; Ionita, Ciprian N.
2017-01-01
Complex vascular anatomies can cause the failure of image-guided endovascular procedures. 3D printed patient-specific vascular phantoms provide clinicians and medical device companies the ability to preemptively plan surgical treatments, test the likelihood of device success, and determine potential operative setbacks. This research aims to present advanced mesh manipulation techniques of stereolithographic (STL) files segmented from medical imaging and post-print surface optimization to match physiological vascular flow resistance. For phantom design, we developed three mesh manipulation techniques. The first method allows outlet 3D mesh manipulations to merge superfluous vessels into a single junction, decreasing the number of flow outlets and making it feasible to include smaller vessels. Next we introduced Boolean operations to eliminate the need to manually merge mesh layers and eliminate errors of mesh self-intersections that previously occurred. Finally we optimize support addition to preserve the patient anatomical geometry. For post-print surface optimization, we investigated various solutions and methods to remove support material and smooth the inner vessel surface. Solutions of chloroform, alcohol and sodium hydroxide were used to process various phantoms and hydraulic resistance was measured and compared with values reported in literature. The newly mesh manipulation methods decrease the phantom design time by 30 – 80% and allow for rapid development of accurate vascular models. We have created 3D printed vascular models with vessel diameters less than 0.5 mm. The methods presented in this work could lead to shorter design time for patient specific phantoms and better physiological simulations. PMID:28649165
Structural Analysis Using Computer Based Methods
NASA Technical Reports Server (NTRS)
Dietz, Matthew R.
2013-01-01
The stiffness of a flex hose that will be used in the umbilical arms of the Space Launch Systems mobile launcher needed to be determined in order to properly qualify ground umbilical plate behavior during vehicle separation post T-0. This data is also necessary to properly size and design the motors used to retract the umbilical arms. Therefore an experiment was created to determine the stiffness of the hose. Before the test apparatus for the experiment could be built, the structure had to be analyzed to ensure it would not fail under given loading conditions. The design model was imported into the analysis software and optimized to decrease runtime while still providing accurate restlts and allow for seamless meshing. Areas exceeding the allowable stresses in the structure were located and modified before submitting the design for fabrication. In addition, a mock up of a deep space habitat and the support frame was designed and needed to be analyzed for structural integrity under different loading conditions. The load cases were provided by the customer and were applied to the structure after optimizing the geometry. Once again, weak points in the structure were located and recommended design changes were made to the customer and the process was repeated until the load conditions were met without exceeding the allowable stresses. After the stresses met the required factors of safety the designs were released for fabrication.
Labenz, J; Armstrong, D; Zetterstrand, S; Eklund, S; Leodolter, A
2009-06-01
Ability to predict freedom from heartburn relapse during maintenance therapy for healed reflux oesophagitis may facilitate optimal treatment choices for individual patients. To determine factors predicting freedom from heartburn relapse during maintenance proton pump inhibitor therapy in patients with healed reflux oesophagitis. This post-hoc analysis used data from the maintenance phase of the EXPO study (AstraZeneca study code: SH-NEG-0008); 2766 patients with healed reflux oesophagitis and resolved heartburn received once-daily esomeprazole 20 mg or pantoprazole 20 mg for 6 months. Multiple logistic regression analysis determined factors associated with freedom from heartburn relapse. Heartburn relapse rates were lower with esomeprazole than pantoprazole in all subgroups analysed. Esomeprazole treatment was the factor most strongly associated with freedom from heartburn relapse (odds ratio 2.08; P < 0.0001). Other factors significantly associated with freedom from heartburn relapse were Helicobacter pylori infection, greater age, non-obesity, absence of epigastric pain at baseline, pre-treatment nonsevere heartburn and GERD symptom duration < or =5 years. Several factors predict freedom from heartburn relapse during maintenance proton pump inhibitor therapy for healed reflux oesophagitis, the strongest being choice of proton pump inhibitor. These findings outline the importance of optimizing acid control and identifying predictors of relapse for effective long-term symptom management in reflux oesophagitis patients.
Bashir, Mohammed J K; Mau Han, Tham; Jun Wei, Lim; Choon Aun, Ng; Abu Amr, Salem S
2016-01-01
As the ponding system used to treat palm oil mill effluent (POME) frequently fails to satisfy the discharge standard in Malaysia, the present study aimed to resolve this problem using an optimized electrocoagulation process. Thus, a central composite design (CCD) module in response surface methodology was employed to optimize the interactions of process variables, namely current density, contact time and initial pH targeted on maximum removal of chemical oxygen demand (COD), colour and turbidity with satisfactory pH of discharge POME. The batch study was initially designed by CCD and statistical models of responses were subsequently derived to indicate the significant terms of interactive process variables. All models were verified by analysis of variance showing model significances with Prob > F < 0.01. The optimum performance was obtained at the current density of 56 mA/cm(2), contact time of 65 min and initial pH of 4.5, rendering complete removal of colour and turbidity with COD removal of 75.4%. The pH of post-treated POME of 7.6 was achieved, which is suitable for direct discharge. These predicted outputs were subsequently confirmed by insignificant standard deviation readings between predicted and actual values. This optimum condition also permitted the simultaneous removal of NH3-N, and various metal ions, signifying the superiority of the electrocoagulation process optimized by CCD.
Post-Flight Assessment of Low Density Supersonic Decelerator Flight Dynamics Test 2 Simulation
NASA Technical Reports Server (NTRS)
Dutta, Soumyo; Bowes, Angela L.; White, Joseph P.; Striepe, Scott A.; Queen, Eric M.; O'Farrel, Clara; Ivanov, Mark C.
2016-01-01
NASA's Low Density Supersonic Decelerator (LDSD) project conducted its second Supersonic Flight Dynamics Test (SFDT-2) on June 8, 2015. The Program to Optimize Simulated Trajectories II (POST2) was one of the flight dynamics tools used to simulate and predict the flight performance and was a major tool used in the post-flight assessment of the flight trajectory. This paper compares the simulation predictions with the reconstructed trajectory. Additionally, off-nominal conditions seen during flight are modeled in the simulation to reconcile the predictions with flight data. These analyses are beneficial to characterize the results of the flight test and to improve the simulation and targeting of the subsequent LDSD flights.
NASA Technical Reports Server (NTRS)
Hedges, L. M. (Editor)
1973-01-01
Detailed data are presented on phenolic-glass and phenolic-asbestos compounds which compare the effect of compression molding without degas to the effects of four variations of compression molding. These variations were designed to improve elimination of entrapped volatiles and the volatile products of the condensate reaction associated with the cure of phenolic resins. The utilization of conventional methods of degas plus degas by vacuum and directional heat flow methods are involved. Detailed data are also presented on these same compounds, comparing the effect of changes in post-bake time, and post-bake temperature for the five molding techniques.
Demystifying post-stroke pain: from etiology to treatment
Treister, Andrew K.; Hatch, Maya N.; Cramer, Steven C.; Chang, Eric Y.
2016-01-01
Pain following stroke is commonly reported but often incompletely managed, which prevents optimal recovery. This is in part due to the esoteric nature of post-stroke pain and its limited presence in current discussions of stroke management. The major specific afflictions that affect patients with stroke who develop pain include central post-stroke pain (CPSP), complex regional pain syndrome (CRPS), and pain associated with spasticity and shoulder subluxation. Each disorder carries its own intricacies that require specific approaches to treatment and understanding. This review aims to present and clarify the major pain syndromes that affect patients who have suffered from stroke in order to aid in their diagnosis and treatment. PMID:27317916
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dousset, N.; Negre, A.; Salvayre, R.
1988-06-01
A fluorescent radiolabeled triacylglycerol has been synthesized by using a fluorescent fatty acid (pyrene decanoic acid) and a radiolabeled oleic acid. This analog of the natural substrate, 1(3)pyrene decanoic-2,3 (1,2)-dioleoyl-sn-glycerol, has been tested as substrate for determining lipoprotein lipase and hepatic triacylglycerol lipase activities in post-heparin plasma. Optimal conditions for the determination of the two post-heparin plasma lipases were similar to those using radiolabeled triolein. Using this substrate, both post-heparin lipases exhibited their characteristic properties (pH optimum and effect of inhibitors) and attacked external ester bonds (1 or 3) containing pyrene decanoic and oleic acids at a similar rate.
Remote Sensing Decision Support System for Optimal Access Restoration in Post Disaster Environments
DOT National Transportation Integrated Search
2017-01-01
Access restoration is an extremely important part of disaster response. Without access to the site, critically important emergency functions like search and rescue, emergency evacuation, and relief distribution, cannot commence. Frequently, roads are...
Winning the war against ICU-acquired weakness: new innovations in nutrition and exercise physiology.
Wischmeyer, Paul E; San-Millan, Inigo
2015-01-01
Over the last 10 years we have significantly reduced hospital mortality from sepsis and critical illness. However, the evidence reveals that over the same period we have tripled the number of patients being sent to rehabilitation settings. Further, given that as many as half of the deaths in the first year following ICU admission occur post ICU discharge, it is unclear how many of these patients ever returned home. For those who do survive, the latest data indicate that 50-70% of ICU "survivors" will suffer cognitive impairment and 60-80% of "survivors" will suffer functional impairment or ICU-acquired weakness (ICU-AW). These observations demand that we as intensive care providers ask the following questions: "Are we creating survivors ... or are we creating victims?" and "Do we accomplish 'Pyrrhic Victories' in the ICU?" Interventions to address ICU-AW must have a renewed focus on optimal nutrition, anabolic/anticatabolic strategies, and in the future employ the personalized muscle and exercise evaluation techniques utilized by elite athletes to optimize performance. Specifically, strategies must include optimal protein delivery (1.2-2.0 g/kg/day), as an athlete would routinely employ. However, as is clear in elite sports performance, optimal nutrition is fundamental but alone is often not enough. We know burn patients can remain catabolic for 2 years post burn; thus, anticatabolic agents (i.e., beta-blockers) and anabolic agents (i.e., oxandrolone) will probably also be essential. In the near future, evaluation techniques such as assessing lean body mass at the bedside using ultrasound to determine nutritional status and ultrasound-measured muscle glycogen as a marker of muscle injury and recovery could be utilized to help find the transition from the acute phase of critical illness to the recovery phase. Finally, exercise physiology testing that evaluates muscle substrate utilization during exercise can be used to diagnose muscle mitochondrial dysfunction and to guide a personalized ideal heart rate, assisting in recovery of muscle mitochondrial function and functional endurance post ICU. In the end, future ICU-AW research must focus on using a combination of modern performance-enhancing nutrition, anticatabolic/anabolic interventions, and muscle/exercise testing so we can begin to create more "survivors" and fewer victims post ICU care.
NASA Technical Reports Server (NTRS)
Murri, Daniel G.; Dwyer Cianciolo, Alicia; Shidner, Jeremy D.; Powell, Richard W.
2014-01-01
On December 11, 2013, the International Space Station (ISS) experienced a failure of the External Thermal Control System (ETCS) Loop A Pump Module (PM). To minimize the number of extravehicular activities (EVA) required to replace the PM, jettisoning the faulty pump was evaluated. The objective of this study was to independently evaluate the jettison options considered by the ISS Trajectory Operations Officer (TOPO) and to provide recommendations for safe jettison of the ETCS Loop A PM. The simulation selected to evaluate the TOPO options was the NASA Engineering and Safety Center's (NESC) version of Program to Optimize Simulated Trajectories II (POST2) developed to support another NESC assessment. The objective of the jettison analysis was twofold: (1) to independently verify TOPO posigrade and retrograde jettison results, and (2) to determine jettison guidelines based on additional sensitivity, trade study, and Monte Carlo (MC) analysis that would prevent PM recontact. Recontact in this study designates a propagated PM trajectory that comes within 500 m of the ISS propagated trajectory. An additional simulation using Systems Tool Kit (STK) was run for independent verification of the POST2 simulation results. Ultimately, the ISS Program removed the PM jettison option from consideration. However, prior to the Program decision, the retrograde jettison option remained part of the EVA contingency plan. The jettison analysis presented showed that, in addition to separation velocity/direction and the atmosphere conditions, the key variables in determining the time to recontact the ISS is highly dependent on the ballistic number (BN) difference between the object being jettisoned and the ISS.
Lin, Chao-Yuan; Fu, Kuei-Lin; Lin, Cheng-Yu
2016-11-01
Recent extreme rainfall events led to many landslides due to climate changes in Taiwan. How to effectively promote post-disaster treatment and/or management works in a watershed/drainage basin is a crucial issue. Regarding the processes of watershed treatment and/or management works, disaster hotspot scanning and treatment priority setup should be carried out in advance. A scanning method using landslide ratio to determine the appropriate outlet of an interested watershed, and an optimal subdivision system with better homogeneity and accuracy in landslide ratio estimation were developed to help efficient executions of treatment and/or management works. Topography is a key factor affecting watershed landslide ratio. Considering the complexity and uncertainty of the natural phenomenon, multivariate analysis was applied to understand the relationship between topographic factors and landslide ratio in the interested watershed. The concept of species-area curve, which is usually adopted at on-site vegetation investigation to determinate the suitable quadrate size, was used to derive the optimal threshold in subdivisions. Results show that three main component axes including factors of scale, network and shape extracted from Digital Terrain Model coupled with areas of landslide can effectively explain the characteristics of landslide ratio in the interested watershed, and a relation curve obtained from the accuracy of landslide ratio classification and number of subdivisions could be established to derive optimal subdivision of the watershed. The subdivision method promoted in this study could be further used for priority rank and benefit assessment of landslide treatment in a watershed.
NASA Astrophysics Data System (ADS)
Lin, Chao-Yuan; Fu, Kuei-Lin; Lin, Cheng-Yu
2016-11-01
Recent extreme rainfall events led to many landslides due to climate changes in Taiwan. How to effectively promote post-disaster treatment and/or management works in a watershed/drainage basin is a crucial issue. Regarding the processes of watershed treatment and/or management works, disaster hotspot scanning and treatment priority setup should be carried out in advance. A scanning method using landslide ratio to determine the appropriate outlet of an interested watershed, and an optimal subdivision system with better homogeneity and accuracy in landslide ratio estimation were developed to help efficient executions of treatment and/or management works. Topography is a key factor affecting watershed landslide ratio. Considering the complexity and uncertainty of the natural phenomenon, multivariate analysis was applied to understand the relationship between topographic factors and landslide ratio in the interested watershed. The concept of species-area curve, which is usually adopted at on-site vegetation investigation to determinate the suitable quadrate size, was used to derive the optimal threshold in subdivisions. Results show that three main component axes including factors of scale, network and shape extracted from Digital Terrain Model coupled with areas of landslide can effectively explain the characteristics of landslide ratio in the interested watershed, and a relation curve obtained from the accuracy of landslide ratio classification and number of subdivisions could be established to derive optimal subdivision of the watershed. The subdivision method promoted in this study could be further used for priority rank and benefit assessment of landslide treatment in a watershed.
Independent Prognostic Factors for Acute Organophosphorus Pesticide Poisoning.
Tang, Weidong; Ruan, Feng; Chen, Qi; Chen, Suping; Shao, Xuebo; Gao, Jianbo; Zhang, Mao
2016-07-01
Acute organophosphorus pesticide poisoning (AOPP) is becoming a significant problem and a potential cause of human mortality because of the abuse of organophosphate compounds. This study aims to determine the independent prognostic factors of AOPP by using multivariate logistic regression analysis. The clinical data for 71 subjects with AOPP admitted to our hospital were retrospectively analyzed. This information included the Acute Physiology and Chronic Health Evaluation II (APACHE II) scores, 6-h post-admission blood lactate levels, post-admission 6-h lactate clearance rates, admission blood cholinesterase levels, 6-h post-admission blood cholinesterase levels, cholinesterase activity, blood pH, and other factors. Univariate analysis and multivariate logistic regression analyses were conducted to identify all prognostic factors and independent prognostic factors, respectively. A receiver operating characteristic curve was plotted to analyze the testing power of independent prognostic factors. Twelve of 71 subjects died. Admission blood lactate levels, 6-h post-admission blood lactate levels, post-admission 6-h lactate clearance rates, blood pH, and APACHE II scores were identified as prognostic factors for AOPP according to the univariate analysis, whereas only 6-h post-admission blood lactate levels, post-admission 6-h lactate clearance rates, and blood pH were independent prognostic factors identified by multivariate logistic regression analysis. The receiver operating characteristic analysis suggested that post-admission 6-h lactate clearance rates were of moderate diagnostic value. High 6-h post-admission blood lactate levels, low blood pH, and low post-admission 6-h lactate clearance rates were independent prognostic factors identified by multivariate logistic regression analysis. Copyright © 2016 by Daedalus Enterprises.
A Thematic Analysis of Online Discussion Boards for Vasectomy.
Samplaski, Mary K
2018-01-01
To examine posts on Internet discussion groups related to vasectomies, and identify common ideas through a structured theme analysis. Internet discussion boards were identified using the search term "vasectomy." Three discussion boards were identified as having the most posts and were chosen for analysis. Using an iterative and structured analysis process, each post was analyzed using thematic analysis in 3 steps (open coding, axial coding, and selective coding) to determine common themes. A total of 129 posts were analyzed. The most common posts related to changes in sexual function after vasectomy. The second most common theme was pain after vasectomy. There were also posts about considerations before vasectomy, planning for postvasectomy care, what to expect after vasectomy, potential issues after vasectomy and how to manage these, and feelings about vasectomy. Some of the information present did not have a factual basis. Posts dedicated to postvasectomy pain and sexual dysfunction were of the highest quantity. There was no medical provider input to these discussion boards. Educational efforts should be targeted to these areas and should include a health-care professional. Copyright © 2017 Elsevier Inc. All rights reserved.
Efficient sensitivity analysis and optimization of a helicopter rotor
NASA Technical Reports Server (NTRS)
Lim, Joon W.; Chopra, Inderjit
1989-01-01
Aeroelastic optimization of a system essentially consists of the determination of the optimum values of design variables which minimize the objective function and satisfy certain aeroelastic and geometric constraints. The process of aeroelastic optimization analysis is illustrated. To carry out aeroelastic optimization effectively, one needs a reliable analysis procedure to determine steady response and stability of a rotor system in forward flight. The rotor dynamic analysis used in the present study developed inhouse at the University of Maryland is based on finite elements in space and time. The analysis consists of two major phases: vehicle trim and rotor steady response (coupled trim analysis), and aeroelastic stability of the blade. For a reduction of helicopter vibration, the optimization process requires the sensitivity derivatives of the objective function and aeroelastic stability constraints. For this, the derivatives of steady response, hub loads and blade stability roots are calculated using a direct analytical approach. An automated optimization procedure is developed by coupling the rotor dynamic analysis, design sensitivity analysis and constrained optimization code CONMIN.
Post-Flight Data Analysis Tool
NASA Technical Reports Server (NTRS)
George, Marina
2018-01-01
A software tool that facilitates the retrieval and analysis of post-flight data. This allows our team and other teams to effectively and efficiently analyze and evaluate post-flight data in order to certify commercial providers.
Kim, Joung Joo; Park, Kang Bae; Choi, Eun Ji; Hyun, Sang Hwan; Kim, Nam-Hyung; Jeong, Yeon Woo; Hwang, Woo Suk
2017-10-01
Canine oocytes ovulated at prophase complete meiosis and continue to develop in presence of a high progesterone concentration in the oviduct. Considering that meiotic competence of canine oocyte is accomplished in the oviductal environment, we postulate that hormonal milieu resulting from the circulating progesterone concentration may affect oocyte maturation and early development of embryos. From 237 oocyte donors, 2620 oocytes were collected and their meiotic status and morphology were determined. To determine optimal characteristics of the mature oocytes subjected to nuclear transfer, a proportion of the meiotic status of the oocytes were classified in reference to time post-ovulation as well as progesterone (P4) level. A high proportion of matured oocytes were collected from >126h (55.5%) post-ovulation or 40-50ngmL -1 (46.4%) group compared to the other groups. Of the oocyte donors that provided mature oocytes in vivo, there was no correlation between serum progesterone of donors and time post ovulation, however, time post-ovulation were significantly shorter for <30ng/mL group (P<0.05). Using mature oocytes, 1161 cloned embryos were reconstructed and transferred into 77 surrogates. In order to determine the relationship between pregnancy performance and serum progesterone level, embryos were transferred into surrogates showing various P4 serum levels. The highest pregnancy (31.8%) and live birth cloning efficacy (2.2%) rates were observed when the embryos were transferred into surrogates with circulating P4 levels were from 40 to 50ngmL -1 . In conclusion, measurement of circulating progesterone of female dog could be a suitable an indicator of the optimal time to collect quality oocyte and to select surrogates for cloning. Copyright © 2017 Elsevier B.V. All rights reserved.
Spatial considerations during cryopreservation of a large volume sample.
Kilbride, Peter; Lamb, Stephen; Milne, Stuart; Gibbons, Stephanie; Erro, Eloy; Bundy, James; Selden, Clare; Fuller, Barry; Morris, John
2016-08-01
There have been relatively few studies on the implications of the physical conditions experienced by cells during large volume (litres) cryopreservation - most studies have focused on the problem of cryopreservation of smaller volumes, typically up to 2 ml. This study explores the effects of ice growth by progressive solidification, generally seen during larger scale cryopreservation, on encapsulated liver hepatocyte spheroids, and it develops a method to reliably sample different regions across the frozen cores of samples experiencing progressive solidification. These issues are examined in the context of a Bioartificial Liver Device which requires cryopreservation of a 2 L volume in a strict cylindrical geometry for optimal clinical delivery. Progressive solidification cannot be avoided in this arrangement. In such a system optimal cryoprotectant concentrations and cooling rates are known. However, applying these parameters to a large volume is challenging due to the thermal mass and subsequent thermal lag. The specific impact of this to the cryopreservation outcome is required. Under conditions of progressive solidification, the spatial location of Encapsulated Liver Spheroids had a strong impact on post-thaw recovery. Cells in areas first and last to solidify demonstrated significantly impaired post-thaw function, whereas areas solidifying through the majority of the process exhibited higher post-thaw outcome. It was also found that samples where the ice thawed more rapidly had greater post-thaw viability 24 h post-thaw (75.7 ± 3.9% and 62.0 ± 7.2% respectively). These findings have implications for the cryopreservation of large volumes with a rigid shape and for the cryopreservation of a Bioartificial Liver Device. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.
Yusuf, Mehran B; Amsbaugh, Mark J; Burton, Eric; Nelson, Megan; Williams, Brian; Koutourousiou, Maria; Nauta, Haring; Woo, Shiao
2018-02-01
We sought to determine the impact of time to initiation (TTI) of post-operative radiosurgery on clinical outcomes for patients with resected brain metastases and to identify predictors associated with TTI. All patients with resected brain metastases treated with postoperative SRS or fractionated stereotactic radiation therapy (fSRT) from 2012 to 2016 at a single institution were reviewed. TTI was defined as the interval from resection to first day of radiosurgery. Receiver operating characteristic (ROC) curves were used to identify an optimal threshold for TTI with respect to local failure (LF). Survival outcomes were estimated using the Kaplan-Meier method and analyzed using the log-rank test and Cox proportional hazards models. Logistic regression models were used to identify factors associated with ROC-determined TTI covariates. A total of 79 resected lesions from 73 patients were evaluated. An ROC curve of LF and TTI identified an optimal threshold for TTI of 30.5 days, with an area under the curve of 0.637. TTI > 30 days was associated with an increased hazard of LF (HR 4.525, CI 1.239-16.527) but was not significantly associated with survival (HR 1.002, CI 0.547-1.823) or distant brain failure (DBF, HR 1.943, CI 0.989-3.816). Fifteen patients (20.5%) required post-operative inpatient rehabilitation. Post-operative rehabilitation was associated with TTI > 30 days (OR 1.48, CI 1.142-1.922). In our study of resected brain metastases, longer time to initiation of post-operative radiosurgery was associated with increased local failure. Ideally, post-op SRS should be initiated within 30 days of resection if feasible.
Aerocapture Performance Analysis of A Venus Exploration Mission
NASA Technical Reports Server (NTRS)
Starr, Brett R.; Westhelle, Carlos H.
2005-01-01
A performance analysis of a Discovery Class Venus Exploration Mission in which aerocapture is used to capture a spacecraft into a 300km polar orbit for a two year science mission has been conducted to quantify its performance. A preliminary performance assessment determined that a high heritage 70 sphere-cone rigid aeroshell with a 0.25 lift to drag ratio has adequate control authority to provide an entry flight path angle corridor large enough for the mission s aerocapture maneuver. A 114 kilograms per square meter ballistic coefficient reference vehicle was developed from the science requirements and the preliminary assessment s heating indicators and deceleration loads. Performance analyses were conducted for the reference vehicle and for sensitivity studies on vehicle ballistic coefficient and maximum bank rate. The performance analyses used a high fidelity flight simulation within a Monte Carlo executive to define the aerocapture heating environment and deceleration loads and to determine mission success statistics. The simulation utilized the Program to Optimize Simulated Trajectories (POST) that was modified to include Venus specific atmospheric and planet models, aerodynamic characteristics, and interplanetary trajectory models. In addition to Venus specific models, an autonomous guidance system, HYPAS, and a pseudo flight controller were incorporated in the simulation. The Monte Carlo analyses incorporated a reference set of approach trajectory delivery errors, aerodynamic uncertainties, and atmospheric density variations. The reference performance analysis determined the reference vehicle achieves 100% successful capture and has a 99.87% probability of attaining the science orbit with a 90 meters per second delta V budget for post aerocapture orbital adjustments. A ballistic coefficient trade study conducted with reference uncertainties determined that the 0.25 L/D vehicle can achieve 100% successful capture with a ballistic coefficient of 228 kilograms per square meter and that the increased ballistic coefficient increases post aerocapture V budget to 134 meters per second for a 99.87% probability of attaining the science orbit. A trade study on vehicle bank rate determined that the 0.25 L/D vehicle can achieve 100% successful capture when the maximum bank rate is decreased from 30 deg/s to 20 deg/s. The decreased bank rate increases post aerocapture delta V budget to 102 meters per second for a 99.87% probability of attaining the science orbit.
NASA Astrophysics Data System (ADS)
Lopez, S. R.; Hogue, T. S.
2011-12-01
Global climate models (GCMs) are primarily used to generate historical and future large-scale circulation patterns at a coarse resolution (typical order of 50,000 km2) and fail to capture climate variability at the ground level due to localized surface influences (i.e topography, marine, layer, land cover, etc). Their inability to accurately resolve these processes has led to the development of numerous 'downscaling' techniques. The goal of this study is to enhance statistical downscaling of daily precipitation and temperature for regions with heterogeneous land cover and topography. Our analysis was divided into two periods, historical (1961-2000) and contemporary (1980-2000), and tested using sixteen predictand combinations from four GCMs (GFDL CM2.0, GFDL CM2.1, CNRM-CM3 and MRI-CGCM2 3.2a. The Southern California area was separated into five county regions: Santa Barbara, Ventura, Los Angeles, Orange and San Diego. Principle component analysis (PCA) was performed on ground-based observations in order to (1) reduce the number of redundant gauges and minimize dimensionality and (2) cluster gauges that behave statistically similarly for post-analysis. Post-PCA analysis included extensive testing of predictor-predictand relationships using an enhanced canonical correlation analysis (ECCA). The ECCA includes obtaining the optimal predictand sets for all models within each spatial domain (county) as governed by daily and monthly overall statistics. Results show all models maintain mean annual and monthly behavior within each county and daily statistics are improved. The level of improvement highly depends on the vegetation extent within each county and the land-to-ocean ratio within the GCM spatial grid. The utilization of the entire historical period also leads to better statistical representation of observed daily precipitation. The validated ECCA technique is being applied to future climate scenarios distributed by the IPCC in order to provide forcing data for regional hydrologic models and assess future water resources in the Southern California region.
Revel, Aurélia; Jarzaguet, Marianne; Peyron, Marie-Agnès; Papet, Isabelle; Hafnaoui, Noureddine; Migné, Carole; Mosoni, Laurent; Polakof, Sergio; Savary-Auzeloux, Isabelle; Rémond, Didier
2017-01-01
Background Muscle atrophy has been explained by an anabolic resistance following food intake and an increase of dietary protein intake is recommended. To be optimal, a dietary protein has to be effective not only to initiate but also to prolong a muscle anabolic response in a catabolic state. To our knowledge, whether or not a dairy or a dairy/plant protein blend fulfills these criterions is unknown in a muscle wasting situation. Objective Our aim was, in a control and a catabolic state, to measure continuously muscle anabolism in term of intensity and duration in response to a meal containing casein (CAS), whey (WHEY) or a whey/ plant protein blend (BLEND) and to evaluate the best protein source to elicit the best post prandial anabolism according to the physio-pathological state. Methods Adult male Yucatan mini pigs were infused with U-13C-Phenylalanine and fed either CAS, WHEY or BLEND. A catabolic state was induced by a glucocorticoid treatment for 8 days (DEX). Muscle protein synthesis, proteolysis and balance were measured with the hind limb arterio-venous differences technique. Repeated time variance analysis were used to assess significant differences. Results In a catabolic situation, whey proteins were able to initiate muscle anabolism which remained transient in contrast to the stimulated muscle protein accretion with WHEY, CAS or BLEND in healthy conditions. Despite the same leucine intake compared to WHEY, BLEND did not restore a positive protein balance in DEX animals. Conclusions Even with WHEY, the duration of the anabolic response was not optimal and has to be improved in a catabolic state. The use of BLEND remained of lower efficiency even at same leucine intake than whey. PMID:29045496
Revel, Aurélia; Jarzaguet, Marianne; Peyron, Marie-Agnès; Papet, Isabelle; Hafnaoui, Noureddine; Migné, Carole; Mosoni, Laurent; Polakof, Sergio; Savary-Auzeloux, Isabelle; Rémond, Didier; Dardevet, Dominique
2017-01-01
Muscle atrophy has been explained by an anabolic resistance following food intake and an increase of dietary protein intake is recommended. To be optimal, a dietary protein has to be effective not only to initiate but also to prolong a muscle anabolic response in a catabolic state. To our knowledge, whether or not a dairy or a dairy/plant protein blend fulfills these criterions is unknown in a muscle wasting situation. Our aim was, in a control and a catabolic state, to measure continuously muscle anabolism in term of intensity and duration in response to a meal containing casein (CAS), whey (WHEY) or a whey/ plant protein blend (BLEND) and to evaluate the best protein source to elicit the best post prandial anabolism according to the physio-pathological state. Adult male Yucatan mini pigs were infused with U-13C-Phenylalanine and fed either CAS, WHEY or BLEND. A catabolic state was induced by a glucocorticoid treatment for 8 days (DEX). Muscle protein synthesis, proteolysis and balance were measured with the hind limb arterio-venous differences technique. Repeated time variance analysis were used to assess significant differences. In a catabolic situation, whey proteins were able to initiate muscle anabolism which remained transient in contrast to the stimulated muscle protein accretion with WHEY, CAS or BLEND in healthy conditions. Despite the same leucine intake compared to WHEY, BLEND did not restore a positive protein balance in DEX animals. Even with WHEY, the duration of the anabolic response was not optimal and has to be improved in a catabolic state. The use of BLEND remained of lower efficiency even at same leucine intake than whey.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bethel, E. Wes; Greenwald, Martin; Kleese van Dam, Kerstin
Scientific user facilities—particle accelerators, telescopes, colliders, supercomputers, light sources, sequencing facilities, and more—operated by the U.S. Department of Energy (DOE) Office of Science (SC) generate ever increasing volumes of data at unprecedented rates from experiments, observations, and simulations. At the same time there is a growing community of experimentalists that require real-time data analysis feedback, to enable them to steer their complex experimental instruments to optimized scientific outcomes and new discoveries. Recent efforts in DOE-SC have focused on articulating the data-centric challenges and opportunities facing these science communities. Key challenges include difficulties coping with data size, rate, and complexity inmore » the context of both real-time and post-experiment data analysis and interpretation. Solutions will require algorithmic and mathematical advances, as well as hardware and software infrastructures that adequately support data-intensive scientific workloads. This paper presents the summary findings of a workshop held by DOE-SC in September 2015, convened to identify the major challenges and the research that is needed to meet those challenges.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bethel, E. Wes; Greenwald, Martin; Kleese van Dam, Kersten
Scientific user facilities---particle accelerators, telescopes, colliders, supercomputers, light sources, sequencing facilities, and more---operated by the U.S. Department of Energy (DOE) Office of Science (SC) generate ever increasing volumes of data at unprecedented rates from experiments, observations, and simulations. At the same time there is a growing community of experimentalists that require real-time data analysis feedback, to enable them to steer their complex experimental instruments to optimized scientific outcomes and new discoveries. Recent efforts in DOE-SC have focused on articulating the data-centric challenges and opportunities facing these science communities. Key challenges include difficulties coping with data size, rate, and complexity inmore » the context of both real-time and post-experiment data analysis and interpretation. Solutions will require algorithmic and mathematical advances, as well as hardware and software infrastructures that adequately support data-intensive scientific workloads. This paper presents the summary findings of a workshop held by DOE-SC in September 2015, convened to identify the major challenges and the research that is needed to meet those challenges.« less