Light-Field Imaging Toolkit

NASA Astrophysics Data System (ADS)

Bolan, Jeffrey; Hall, Elise; Clifford, Chris; Thurow, Brian

The Light-Field Imaging Toolkit (LFIT) is a collection of MATLAB functions designed to facilitate the rapid processing of raw light field images captured by a plenoptic camera. An included graphical user interface streamlines the necessary post-processing steps associated with plenoptic images. The generation of perspective shifted views and computationally refocused images is supported, in both single image and animated formats. LFIT performs necessary calibration, interpolation, and structuring steps to enable future applications of this technology.

3D freeform printing of silk fibroin.

PubMed

Rodriguez, Maria J; Dixon, Thomas A; Cohen, Eliad; Huang, Wenwen; Omenetto, Fiorenzo G; Kaplan, David L

2018-04-15

Freeform fabrication has emerged as a key direction in printing biologically-relevant materials and structures. With this emerging technology, complex structures with microscale resolution can be created in arbitrary geometries and without the limitations found in traditional bottom-up or top-down additive manufacturing methods. Recent advances in freeform printing have used the physical properties of microparticle-based granular gels as a medium for the submerged extrusion of bioinks. However, most of these techniques require post-processing or crosslinking for the removal of the printed structures (Miller et al., 2015; Jin et al., 2016) [1,2]. In this communication, we introduce a novel method for the one-step gelation of silk fibroin within a suspension of synthetic nanoclay (Laponite) and polyethylene glycol (PEG). Silk fibroin has been used as a biopolymer for bioprinting in several contexts, but chemical or enzymatic additives or bulking agents are needed to stabilize 3D structures. Our method requires no post-processing of printed structures and allows for in situ physical crosslinking of pure aqueous silk fibroin into arbitrary geometries produced through freeform 3D printing. 3D bioprinting has emerged as a technology that can produce biologically relevant structures in defined geometries with microscale resolution. Techniques for fabrication of free-standing structures by printing into granular gel media has been demonstrated previously, however, these methods require crosslinking agents and post-processing steps on printed structures. Our method utilizes one-step gelation of silk fibroin within a suspension of synthetic nanoclay (Laponite), with no need for additional crosslinking compounds or post processing of the material. This new method allows for in situ physical crosslinking of pure aqueous silk fibroin into defined geometries produced through freeform 3D printing. Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Fast wettability transition from hydrophilic to superhydrophobic laser-textured stainless steel surfaces under low-temperature annealing

NASA Astrophysics Data System (ADS)

Ngo, Chi-Vinh; Chun, Doo-Man

2017-07-01

Recently, the fabrication of superhydrophobic metallic surfaces by means of pulsed laser texturing has been developed. After laser texturing, samples are typically chemically coated or aged in ambient air for a relatively long time of several weeks to achieve superhydrophobicity. To accelerate the wettability transition from hydrophilicity to superhydrophobicity without the use of additional chemical treatment, a simple annealing post process has been developed. In the present work, grid patterns were first fabricated on stainless steel by a nanosecond pulsed laser, then an additional low-temperature annealing post process at 100 °C was applied. The effect of 100-500 μm step size of the textured grid upon the wettability transition time was also investigated. The proposed post process reduced the transition time from a couple of months to within several hours. All samples showed superhydrophobicity with contact angles greater than 160° and sliding angles smaller than 10° except samples with 500 μm step size, and could be applied in several potential applications such as self-cleaning and control of water adhesion.

Thin layer imaging process for microlithography using radiation at strongly attenuated wavelengths

DOEpatents

Wheeler, David R.

2004-01-06

A method for patterning of resist surfaces which is particularly advantageous for systems having low photon flux and highly energetic, strongly attenuated radiation. A thin imaging layer is created with uniform silicon distribution in a bilayer format. An image is formed by exposing selected regions of the silylated imaging layer to radiation. The radiation incident upon the silyliated resist material results in acid generation which either catalyzes cleavage of Si--O bonds to produce moieties that are volatile enough to be driven off in a post exposure bake step or produces a resist material where the exposed portions of the imaging layer are soluble in a basic solution, thereby desilylating the exposed areas of the imaging layer. The process is self limiting due to the limited quantity of silyl groups within each region of the pattern. Following the post exposure bake step, an etching step, generally an oxygen plasma etch, removes the resist material from the de-silylated areas of the imaging layer.

Dynamic mechanical properties of hydroxyapatite/polyethylene oxide nanocomposites: characterizing isotropic and post-processing microstructures

NASA Astrophysics Data System (ADS)

Shofner, Meisha; Lee, Ji Hoon

2012-02-01

Compatible component interfaces in polymer nanocomposites can be used to facilitate a dispersed morphology and improved physical properties as has been shown extensively in experimental results concerning amorphous matrix nanocomposites. In this research, a block copolymer compatibilized interface is employed in a semi-crystalline matrix to prevent large scale nanoparticle clustering and enable microstructure construction with post-processing drawing. The specific materials used are hydroxyapatite nanoparticles coated with a polyethylene oxide-b-polymethacrylic acid block copolymer and a polyethylene oxide matrix. Two particle shapes are used: spherical and needle-shaped. Characterization of the dynamic mechanical properties indicated that the two nanoparticle systems provided similar levels of reinforcement to the matrix. For the needle-shaped nanoparticles, the post-processing step increased matrix crystallinity and changed the thermomechanical reinforcement trends. These results will be used to further refine the post-processing parameters to achieve a nanocomposite microstructure with triangulated arrays of nanoparticles.

Next Steps After Your Diagnosis: Finding Information and Support

MedlinePlus

... Scientific Peer Review Award Process Post-Award Grant Management AHRQ Grantee Profiles Getting Recognition for Your AHRQ-Funded Study Contracts Project Research Online Database (PROD) Searchable database of AHRQ ...

Advanced imaging programs: maximizing a multislice CT investment.

PubMed

Falk, Robert

2008-01-01

Advanced image processing has moved from a luxury to a necessity in the practice of medicine. A hospital's adoption of sophisticated 3D imaging entails several important steps with many factors to consider in order to be successful. Like any new hospital program, 3D post-processing should be introduced through a strategic planning process that includes administrators, physicians, and technologists to design, implement, and market a program that is scalable-one that minimizes up front costs while providing top level service. This article outlines the steps for planning, implementation, and growth of an advanced imaging program.

Campylobacter in chicken carcasses and slaughterhouses in Malaysia.

PubMed

Rejab, Saira Banu Mohamed; Zessin, Karl-Hans; Fries, Reinhard; Patchanee, Prapas

2012-01-01

This study was conducted to determine the Campylobacter contamination rate of chicken carcasses and the processing lines of modern processing plants in Malaysia. Three hundred sixty samples were collected from 24 flocks of broiler chickens at 12 modern poultry processing plants in 6 states of Malaysia. Fresh fecal droppings were collected from crates in the arrival area. Neck skin samples were taken from processed chicken carcasses at 3 different processing stages: before inside-outside washing, after inside-outside washing and post chilling. Swab samples from the scalding tank, chilling tank and conveyer belt before chilling were also collected to determine contamination with Campylobacter in the slaughter house environment prior to slaughter. Isolation for Campylobacter was performed following ISO 10272-1:2006(E). The overall of contamination rate with Campylobacter at the 12 plants was 61.0% (220/360). Eighty point six percent of the samples from before the inside-outside wishing step were contaminated with Campylobacter, as were 62.5% of the samples after the inside washing and 38.9% after the post-chilling step. This study shows extensive contamination of chicken carcasses and slaughtering houses in Malaysia with Campylobacter.

Implementing an ROI Measurement Process at Dell Computer.

ERIC Educational Resources Information Center

Tesoro, Ferdinand

1998-01-01

This return-on-investment (ROI) evaluation study determined the business impact of the sales negotiation training course to Dell Computer Corporation. A five-step ROI measurement process was used: Plan-Develop-Analyze-Communicate-Leverage. The corporate sales information database was used to compare pre- and post-training metrics for both training…

Considering Time in Orthophotography Production: from a General Workflow to a Shortened Workflow for a Faster Disaster Response

NASA Astrophysics Data System (ADS)

Lucas, G.

2015-08-01

This article overall deals with production time with orthophoto imagery with medium size digital frame camera. The workflow examination follows two main parts: data acquisition and post-processing. The objectives of the research are fourfold: 1/ gathering time references for the most important steps of orthophoto production (it turned out that literature is missing on this topic); these figures are used later for total production time estimation; 2/ identifying levers for reducing orthophoto production time; 3/ building a simplified production workflow for emergency response: less exigent with accuracy and faster; and compare it to a classical workflow; 4/ providing methodical elements for the estimation of production time with a custom project. In the data acquisition part a comprehensive review lists and describes all the factors that may affect the acquisition efficiency. Using a simulation with different variables (average line length, time of the turns, flight speed) their effect on acquisition efficiency is quantitatively examined. Regarding post-processing, the time references figures were collected from the processing of a 1000 frames case study with 15 cm GSD covering a rectangular area of 447 km2; the time required to achieve each step during the production is written down. When several technical options are possible, each one is tested and time documented so as all alternatives are available. Based on a technical choice with the workflow and using the compiled time reference of the elementary steps, a total time is calculated for the post-processing of the 1000 frames. Two scenarios are compared as regards to time and accuracy. The first one follows the "normal" practices, comprising triangulation, orthorectification and advanced mosaicking methods (feature detection, seam line editing and seam applicator); the second is simplified and make compromise over positional accuracy (using direct geo-referencing) and seamlines preparation in order to achieve orthophoto production faster. The shortened workflow reduces the production time by more than three whereas the positional error increases from 1 GSD to 1.5 GSD. The examination of time allocation through the production process shows that it is worth sparing time in the post-processing phase.

Prospects for inhibiting the post-transcriptional regulation of gene expression in hepatitis B virus

PubMed Central

Chen, Augustine; Panjaworayan T-Thienprasert, Nattanan; Brown, Chris M

2014-01-01

There is a continuing need for novel antivirals to treat hepatitis B virus (HBV) infection, as it remains a major health problem worldwide. Ideally new classes of antivirals would target multiple steps in the viral lifecycle. In this review, we consider the steps in which HBV RNAs are processed, exported from the nucleus and translated. These are often overlooked steps in the HBV life-cycle. HBV, like retroviruses, incorporates a number of unusual steps in these processes, which use a combination of viral and host cellular machinery. Some of these unusual steps deserve a closer scrutiny. They may provide alternative targets to existing antiviral therapies, which are associated with increasing drug resistance. The RNA post-transcriptional regulatory element identified 20 years ago promotes nucleocytoplasmic export of all unspliced HBV RNAs. There is evidence that inhibition of this step is part of the antiviral action of interferon. Similarly, the structured RNA epsilon element situated at the 5’ end of the polycistronic HBV pregenomic RNA also performs key roles during HBV replication. The pregenomic RNA, which is the template for translation of both the viral core and polymerase proteins, is also encapsidated and used in replication. This complex process, regulated at the epsilon element, also presents an attractive antiviral target. These RNA elements that mediate and regulate gene expression are highly conserved and could be targeted using novel strategies employing RNAi, miRNAs or aptamers. Such approaches targeting these functionally constrained genomic regions should avoid escape mutations. Therefore understanding these regulatory elements, along with providing potential targets, may also facilitate the development of other new classes of antiviral drugs. PMID:25009369

Association rule mining in the US Vaccine Adverse Event Reporting System (VAERS).

PubMed

Wei, Lai; Scott, John

2015-09-01

Spontaneous adverse event reporting systems are critical tools for monitoring the safety of licensed medical products. Commonly used signal detection algorithms identify disproportionate product-adverse event pairs and may not be sensitive to more complex potential signals. We sought to develop a computationally tractable multivariate data-mining approach to identify product-multiple adverse event associations. We describe an application of stepwise association rule mining (Step-ARM) to detect potential vaccine-symptom group associations in the US Vaccine Adverse Event Reporting System. Step-ARM identifies strong associations between one vaccine and one or more adverse events. To reduce the number of redundant association rules found by Step-ARM, we also propose a clustering method for the post-processing of association rules. In sample applications to a trivalent intradermal inactivated influenza virus vaccine and to measles, mumps, rubella, and varicella (MMRV) vaccine and in simulation studies, we find that Step-ARM can detect a variety of medically coherent potential vaccine-symptom group signals efficiently. In the MMRV example, Step-ARM appears to outperform univariate methods in detecting a known safety signal. Our approach is sensitive to potentially complex signals, which may be particularly important when monitoring novel medical countermeasure products such as pandemic influenza vaccines. The post-processing clustering algorithm improves the applicability of the approach as a screening method to identify patterns that may merit further investigation. Copyright © 2015 John Wiley & Sons, Ltd.

Fontan Surgical Planning: Previous Accomplishments, Current Challenges, and Future Directions.

PubMed

Trusty, Phillip M; Slesnick, Timothy C; Wei, Zhenglun Alan; Rossignac, Jarek; Kanter, Kirk R; Fogel, Mark A; Yoganathan, Ajit P

2018-04-01

The ultimate goal of Fontan surgical planning is to provide additional insights into the clinical decision-making process. In its current state, surgical planning offers an accurate hemodynamic assessment of the pre-operative condition, provides anatomical constraints for potential surgical options, and produces decent post-operative predictions if boundary conditions are similar enough between the pre-operative and post-operative states. Moving forward, validation with post-operative data is a necessary step in order to assess the accuracy of surgical planning and determine which methodological improvements are needed. Future efforts to automate the surgical planning process will reduce the individual expertise needed and encourage use in the clinic by clinicians. As post-operative physiologic predictions improve, Fontan surgical planning will become an more effective tool to accurately model patient-specific hemodynamics.

Post-thymic maturation: young T cells assert their individuality.

PubMed

Fink, Pamela J; Hendricks, Deborah W

2011-07-22

T cell maturation was once thought to occur entirely within the thymus. Now, evidence is mounting that the youngest peripheral T cells in both mice and humans comprise a distinct population from their more mature, yet still naive, counterparts. These cells, termed recent thymic emigrants (RTEs), undergo a process of post-thymic maturation that can be monitored at the levels of cell phenotype and immune function. Understanding this final maturation step in the process of generating useful and safe T cells is of clinical relevance, given that RTEs are over-represented in neonates and in adults recovering from lymphopenia. Post-thymic maturation may function to ensure T cell fitness and self tolerance.

A Post-It-Note Pedagogy: Investigating the "petit recit" in an Emergent Model of the Writing Process.

ERIC Educational Resources Information Center

Noble, Michael

Perhaps writing is equated with process. But, there are too many complicating factors that make it difficult to evaluate the success or failure of prewriting and drafting assignments--the process and the value of each step is different for each individual. By teaching students to recognize the cultural contingencies of textuality, the status of…

Novel therapeutic strategies targeting innate immune responses and early inflammation after stroke.

PubMed

Shichita, Takashi; Ago, Tetsuro; Kamouchi, Masahiro; Kitazono, Takanari; Yoshimura, Akihiko; Ooboshi, Hiroaki

2012-11-01

Post-ischemic inflammation is an essential step in the progression of ischemic stroke. This review focuses on the function of infiltrating immune cells, macrophages, and T cells, in ischemic brain injury. The brain is a sterile organ; however, the activation of Toll-like receptor (TLR) 2 and TLR4 is pivotal in the beginning of post-ischemic inflammation. Some endogenous TLR ligands are released from injured brain cells, including high mobility group box 1 and peroxiredoxin family proteins, and activate the infiltrating macrophages and induce the expression of inflammatory cytokines. Following this step, T cells also infiltrate into the ischemic brain and mediate post-ischemic inflammation in the delayed phase. Various cytokines from helper T cells and γδT cells function as neurotoxic (IL-23/IL-17, IFN-γ) or neuroprotective (IL-10, IL-4) mediators. Novel neuroprotective strategies should therefore be developed through more detailed understanding of this process and the regulation of post-ischemic inflammation. © 2012 The Authors Journal of Neurochemistry © International Society for Neurochemistry.

Combined process automation for large-scale EEG analysis.

PubMed

Sfondouris, John L; Quebedeaux, Tabitha M; Holdgraf, Chris; Musto, Alberto E

2012-01-01

Epileptogenesis is a dynamic process producing increased seizure susceptibility. Electroencephalography (EEG) data provides information critical in understanding the evolution of epileptiform changes throughout epileptic foci. We designed an algorithm to facilitate efficient large-scale EEG analysis via linked automation of multiple data processing steps. Using EEG recordings obtained from electrical stimulation studies, the following steps of EEG analysis were automated: (1) alignment and isolation of pre- and post-stimulation intervals, (2) generation of user-defined band frequency waveforms, (3) spike-sorting, (4) quantification of spike and burst data and (5) power spectral density analysis. This algorithm allows for quicker, more efficient EEG analysis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Sealing properties of one-step root-filling fibre post-obturators vs. two-step delayed fibre post-placement.

PubMed

Monticelli, Francesca; Osorio, Raquel; Toledano, Manuel; Ferrari, Marco; Pashley, David H; Tay, Franklin R

2010-07-01

The sealing properties of a one-step obturation post-placement technique consisting of Resilon-capped fibre post-obturators were compared with a two-step technique based on initial Resilon root filling following by 24h-delayed fibre post-placement. Thirty root segments were shaped to size 40, 0.04 taper and filled with: (1) InnoEndo obturators; (2) Resilon/24h-delayed FibreKor post-cementation. Obturator, root filling and post-cementation procedures were performed using InnoEndo bonding agent/dual-cured root canal sealer. Fluid flow rate through the filled roots was evaluated at 10psi using a computerised fluid filtration model before root resection and after 3 and 9mm apical resections. Fluid flow data were analysed using two-way repeated measures ANOVA and Tukey test to examine the effects of root-filling post-placement techniques and root resection lengths on fluid leakage from the filled canals (alpha=0.05). A significantly greater amount of fluid leakage was observed with the one-step technique when compared with two-step technique. No difference in fluid leakage was observed among intact canals and canals resected at different lengths for both materials. The seal of root canals achieved with the one-step obturator is less effective than separate Resilon root fillings followed by a 24-h delay prior to the fibre post-placement. Incomplete setting of the sealer and restricted relief of polymerisation shrinkage stresses may be responsible for the inferior seal of the one-step root-filling/post-restoration technique. Copyright 2010 Elsevier Ltd. All rights reserved.

Two-step size reduction and post-washing of steam exploded corn stover improving simultaneous saccharification and fermentation for ethanol production.

PubMed

Liu, Zhi-Hua; Chen, Hong-Zhang

2017-01-01

The simultaneous saccharification and fermentation (SSF) of corn stover biomass for ethanol production was performed by integrating steam explosion (SE) pretreatment, hydrolysis and fermentation. Higher SE pretreatment severity and two-step size reduction increased the specific surface area, swollen volume and water holding capacity of steam exploded corn stover (SECS) and hence facilitated the efficiency of hydrolysis and fermentation. The ethanol production and yield in SSF increased with the decrease of particle size and post-washing of SECS prior to fermentation to remove the inhibitors. Under the SE conditions of 1.5MPa and 9min using 2.0cm particle size, glucan recovery and conversion to glucose by enzymes were 86.2% and 87.2%, respectively. The ethanol concentration and yield were 45.0g/L and 85.6%, respectively. With this two-step size reduction and post-washing strategy, the water utilization efficiency, sugar recovery and conversion, and ethanol concentration and yield by the SSF process were improved. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automatic sequencing and control of Space Station airlock operations

NASA Technical Reports Server (NTRS)

Himel, Victor; Abeles, Fred J.; Auman, James; Tqi, Terry O.

1989-01-01

Procedures that have been developed as part of the NASA JSC-sponsored pre-prototype Checkout, Servicing and Maintenance (COSM) program for pre- and post-EVA airlock operations are described. This paper addresses the accompanying pressure changes in the airlock and in the Advanced Extravehicular Mobility Unit (EMU). Additionally, the paper focuses on the components that are checked out, and includes the step-by-step sequences to be followed by the crew, the required screen displays and prompts that accompany each step, and a description of the automated processes that occur.

Mechanisms of Virus-Induced Neural Cell Death

DTIC Science & Technology

2005-03-01

Y, et al. Brief CMV, with isolates being resistant to acy- report: severe infectious mononucleosis -like clovir, famciclovir, and valacyclovir, and...protease depen- by 24 h post-infection. The completion of the one-step dent process. Conversion to infectious subvirion particles growth curve precedes...apoptosis increases progres- cell attachment protein o-1 (56). sively at 24-48 h post-infection (92). ISVPs are infectious and can be formed either intra

One-step solution combustion synthesis of pure Ni nanopowders with enhanced coercivity: The fuel effect

NASA Astrophysics Data System (ADS)

Khort, Alexander; Podbolotov, Kirill; Serrano-García, Raquel; Gun'ko, Yurii K.

2017-09-01

In this paper, we report a new modified one-step combustion synthesis technique for production of Ni metal nanoparticles. The main unique feature of our approach is the use of microwave assisted foam preparation. Also, the effect of different types of fuels (urea, citric acid, glycine and hexamethylenetetramine) on the combustion process and characteristics of resultant solid products were investigated. It is observed that the combination of microwave assisted foam preparation and using of hexamethylenetetramine as a fuel allows producing pure ferromagnetic Ni metal nanoparticles with enhanced coercivity (78 Oe) and high value of saturation magnetization (52 emu/g) by one-step solution combustion synthesis under normal air atmosphere without any post-reduction processing.

Post-processing Seasonal Precipitation Forecasts via Integrating Climate Indices and the Analog Approach

NASA Astrophysics Data System (ADS)

Liu, Y.; Zhang, Y.; Wood, A.; Lee, H. S.; Wu, L.; Schaake, J. C.

2016-12-01

Seasonal precipitation forecasts are a primary driver for seasonal streamflow prediction that is critical for a range of water resources applications, such as reservoir operations and drought management. However, it is well known that seasonal precipitation forecasts from climate models are often biased and also too coarse in spatial resolution for hydrologic applications. Therefore, post-processing procedures such as downscaling and bias correction are often needed. In this presentation, we discuss results from a recent study that applies a two-step methodology to downscale and correct the ensemble mean precipitation forecasts from the Climate Forecast System (CFS). First, CFS forecasts are downscaled and bias corrected using monthly reforecast analogs: we identify past precipitation forecasts that are similar to the current forecast, and then use the finer-scale observational analysis fields from the corresponding dates to represent the post-processed ensemble forecasts. Second, we construct the posterior distribution of forecast precipitation from the post-processed ensemble by integrating climate indices: a correlation analysis is performed to identify dominant climate indices for the study region, which are then used to weight the analysis analogs selected in the first step using a Bayesian approach. The methodology is applied to the California Nevada River Forecast Center (CNRFC) and the Middle Atlantic River Forecast Center (MARFC) regions for 1982-2015, using the North American Land Data Assimilation System (NLDAS-2) precipitation as the analysis. The results from cross validation show that the post-processed CFS precipitation forecast are considerably more skillful than the raw CFS with the analog approach only. Integrating climate indices can further improve the skill if the number of ensemble members considered is large enough; however, the improvement is generally limited to the first couple of months when compared against climatology. Impacts of various factors such as ensemble size, lead time, and choice of climate indices will also be discussed.

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2010 CFR

2010-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2011 CFR

2011-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2013 CFR

2013-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2014 CFR

2014-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

49 CFR 40.61 - What are the preliminary steps in the collection process?

Code of Federal Regulations, 2012 CFR

2012-10-01

... that the alcohol test is completed before the urine collection process begins. Example to paragraph (b... ensure that post-accident and reasonable suspicion alcohol tests happen as soon as possible (e.g., by... actually beginning a collection: (a) When a specific time for an employee's test has been scheduled, or the...

Regional and County-Level Disparities in the Post-Socialist Urban System of Romania

NASA Astrophysics Data System (ADS)

Török, Ibolya; Veress, Nóra-Csilla

2016-10-01

The evolution of the urban system in Romania in the last decades has been strongly influenced by its historical background, as well as the changing political, social and economic context. The main step in this process was marked by the year 2004 when 38 settlements received the urban status, influencing thus not only the country's urbanization level but the increased inter-regional disparities as well. The paper aims to analyze the post-urbanization process in Romania, highlighting those factors which have contributed to the deepening development differences between the country's urban areas.

Space Shuttle Orbiter Digital Outer Mold Line Scanning

NASA Technical Reports Server (NTRS)

Campbell, Charles H.; Wilson, Brad; Pavek, Mike; Berger, Karen

2012-01-01

The Space Shuttle Orbiters Discovery and Endeavor have been digitally scanned to produce post-flight configuration outer mold line surfaces. Very detailed scans of the windward side of these vehicles provide resolution of the detailed tile step and gap geometry, as well as the reinforced carbon carbon nose cap and leading edges. Lower resolution scans of the upper surface provide definition of the crew cabin windows, wing upper surfaces, payload bay doors, orbital maneuvering system pods and the vertical tail. The process for acquisition of these digital scans as well as post-processing of the very large data set will be described.

Uncertainties in Eddy Covariance fluxes due to post-field data processing: a multi-site, full factorial analysis

NASA Astrophysics Data System (ADS)

Sabbatini, S.; Fratini, G.; Arriga, N.; Papale, D.

2012-04-01

Eddy Covariance (EC) is the only technologically available direct method to measure carbon and energy fluxes between ecosystems and atmosphere. However, uncertainties related to this method have not been exhaustively assessed yet, including those deriving from post-field data processing. The latter arise because there is no exact processing sequence established for any given situation, and the sequence itself is long and complex, with many processing steps and options available. However, the consistency and inter-comparability of flux estimates may be largely affected by the adoption of different processing sequences. The goal of our work is to quantify the uncertainty introduced in each processing step by the fact that different options are available, and to study how the overall uncertainty propagates throughout the processing sequence. We propose an easy-to-use methodology to assign a confidence level to the calculated fluxes of energy and mass, based on the adopted processing sequence, and on available information such as the EC system type (e.g. open vs. closed path), the climate and the ecosystem type. The proposed methodology synthesizes the results of a massive full-factorial experiment. We use one year of raw data from 15 European flux stations and process them so as to cover all possible combinations of the available options across a selection of the most relevant processing steps. The 15 sites have been selected to be representative of different ecosystems (forests, croplands and grasslands), climates (mediterranean, nordic, arid and humid) and instrumental setup (e.g. open vs. closed path). The software used for this analysis is EddyPro™ 3.0 (www.licor.com/eddypro). The critical processing steps, selected on the basis of the different options commonly used in the FLUXNET community, are: angle of attack correction; coordinate rotation; trend removal; time lag compensation; low- and high- frequency spectral correction; correction for air density fluctuations; and length of the flux averaging interval. We illustrate the results of the full-factorial combination relative to a subset of the selected sites with particular emphasis on the total uncertainty at different time scales and aggregations, as well as a preliminary analysis of the most critical steps for their contribution to the total uncertainties and their potential relation with site set-up characteristics and ecosystem type.

Implication of RuvABC and RecG in homologous recombination in Streptomyces ambofaciens.

PubMed

Hoff, Grégory; Bertrand, Claire; Piotrowski, Emilie; Thibessard, Annabelle; Leblond, Pierre

2017-01-01

Most bacterial organisms rely on homologous recombination to repair DNA double-strand breaks and for the post-replicative repair of DNA single-strand gaps. Homologous recombination can be divided into three steps: (i) a pre-synaptic step in which the DNA 3'-OH ends are processed, (ii) a recA-dependent synaptic step allowing the invasion of an intact copy and the formation of Holliday junctions, and (iii) a post-synaptic step consisting of migration and resolution of these junctions. Currently, little is known about factors involved in homologous recombination, especially for the post-synaptic step. In Escherichia coli, branch migration and resolution are performed by the RuvABC complex, but could also rely on the RecG helicase in a redundant manner. In this study, we show that recG and ruvABC are well-conserved among Streptomyces. ΔruvABC, ΔrecG and ΔruvABC ΔrecG mutant strains were constructed. ΔruvABC ΔrecG is only slightly affected by exposure to DNA damage (UV). We also show that conjugational recombination decreases in the absence of RuvABC and RecG, but that intra-chromosomal recombination is not affected. These data suggest that RuvABC and RecG are indeed involved in homologous recombination in Streptomyces ambofaciens and that alternative factors are able to take over Holliday junction in Streptomyces. Copyright © 2016 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

Automatic cloud coverage assessment of Formosat-2 image

NASA Astrophysics Data System (ADS)

Hsu, Kuo-Hsien

2011-11-01

Formosat-2 satellite equips with the high-spatial-resolution (2m ground sampling distance) remote sensing instrument. It has been being operated on the daily-revisiting mission orbit by National Space organization (NSPO) of Taiwan since May 21 2004. NSPO has also serving as one of the ground receiving stations for daily processing the received Formosat- 2 images. The current cloud coverage assessment of Formosat-2 image for NSPO Image Processing System generally consists of two major steps. Firstly, an un-supervised K-means method is used for automatically estimating the cloud statistic of Formosat-2 image. Secondly, manual estimation of cloud coverage from Formosat-2 image is processed by manual examination. Apparently, a more accurate Automatic Cloud Coverage Assessment (ACCA) method certainly increases the efficiency of processing step 2 with a good prediction of cloud statistic. In this paper, mainly based on the research results from Chang et al, Irish, and Gotoh, we propose a modified Formosat-2 ACCA method which considered pre-processing and post-processing analysis. For pre-processing analysis, cloud statistic is determined by using un-supervised K-means classification, Sobel's method, Otsu's method, non-cloudy pixels reexamination, and cross-band filter method. Box-Counting fractal method is considered as a post-processing tool to double check the results of pre-processing analysis for increasing the efficiency of manual examination.

Mesoscopic homogenization of semi-insulating GaAs by two-step post growth annealing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffmann, B.; Jurisch, M.; Koehler, A.

1996-12-31

Mesoscopic homogenization of the electrical properties of s.i. LEC-GaAs is commonly realized by thermal treatment of the crystals including the steps of dissolution of arsenic precipitates, homogenization of excess As and re-precipitation by creating a controlled supersaturation. Caused by the inhomogeneous distribution of dislocations and the corresponding cellular structure along and across LEC-grown crystals a proper choice of the time-temperature program is necessary to minimize fluctuations of mesoscopic homogeneity. A modified two-step ingot annealing process is demonstrated to ensure the homogeneous distribution of mesoscopic homogeneity.

On Fast Post-Processing of Global Positioning System Simulator Truth Data and Receiver Measurements and Solutions Data

NASA Technical Reports Server (NTRS)

Kizhner, Semion; Day, John H. (Technical Monitor)

2000-01-01

Post-processing of data, related to a GPS receiver test in a GPS simulator and test facility, is an important step towards qualifying a receiver for space flight. Although the GPS simulator provides all the parameters needed to analyze a simulation, as well as excellent analysis tools on the simulator workstation, post-processing is not a GPS simulator or receiver function alone, and it must be planned as a separate pre-flight test program requirement. A GPS simulator is a critical resource, and it is desirable to move off the pertinent test data from the simulator as soon as a test is completed. The receiver and simulator databases are used to extract the test data files for postprocessing. These files are then usually moved from the simulator and receiver systems to a personal computer (PC) platform, where post-processing is done typically using PC-based commercial software languages and tools. Because of commercial software systems generality their functions are notoriously slow and more than often are the bottleneck even for short duration simulator-based tests. There is a need to do post-processing faster and within an hour after test completion, including all required operations on the simulator and receiver to prepare and move off the post-processing files. This is especially significant in order to use the previous test feedback for the next simulation setup or to run near back-to-back simulation scenarios. Solving the post-processing timing problem is critical for a pre-flight test program success. Towards this goal an approach was developed that allows to speed-up post-processing by an order of a magnitude. It is based on improving the post-processing bottleneck function algorithm using a priory information that is specific to a GPS simulation application and using only the necessary volume of truth data. The presented postprocessing scheme was used in support of a few successful space flight missions carrying GPS receivers.

Performance monitoring and response conflict resolution associated with choice stepping reaction tasks.

PubMed

Watanabe, Tatsunori; Tsutou, Kotaro; Saito, Kotaro; Ishida, Kazuto; Tanabe, Shigeo; Nojima, Ippei

2016-11-01

Choice reaction requires response conflict resolution, and the resolution processes that occur during a choice stepping reaction task undertaken in a standing position, which requires maintenance of balance, may be different to those processes occurring during a choice reaction task performed in a seated position. The study purpose was to investigate the resolution processes during a choice stepping reaction task at the cortical level using electroencephalography and compare the results with a control task involving ankle dorsiflexion responses. Twelve young adults either stepped forward or dorsiflexed the ankle in response to a visual imperative stimulus presented on a computer screen. We used the Simon task and examined the error-related negativity (ERN) that follows an incorrect response and the correct-response negativity (CRN) that follows a correct response. Error was defined as an incorrect initial weight transfer for the stepping task and as an incorrect initial tibialis anterior activation for the control task. Results revealed that ERN and CRN amplitudes were similar in size for the stepping task, whereas the amplitude of ERN was larger than that of CRN for the control task. The ERN amplitude was also larger in the stepping task than the control task. These observations suggest that a choice stepping reaction task involves a strategy emphasizing post-response conflict and general performance monitoring of actual and required responses and also requires greater cognitive load than a choice dorsiflexion reaction. The response conflict resolution processes appear to be different for stepping tasks and reaction tasks performed in a seated position.

Contamination Control in Hybrid Microelectronic Modules. Part 1: Identification of Critical Process and Contaminants

NASA Technical Reports Server (NTRS)

Himmel, R. P.

1975-01-01

Various hybrid processing steps, handling procedures, and materials are examined in an attempt to identify sources of contamination and to propose methods for the control of these contaminants. It is found that package sealing, assembly, and rework are especially susceptible to contamination. Moisture and loose particles are identified as the worst contaminants. The points at which contaminants are most likely to enter the hybrid package are also identified, and both general and specific methods for their detection and control are developed. In general, the most effective controls for contaminants are: clean working areas, visual inspection at each step of the process, and effective cleaning at critical process steps. Specific methods suggested include the detection of loose particles by a precap visual inspection, by preseal and post-seal electrical testing, and by a particle impact noise test. Moisture is best controlled by sealing all packages in a clean, dry, inert atmosphere after a thorough bake-out of all parts.

Controlling CH3NH3PbI(3-x)Cl(x) Film Morphology with Two-Step Annealing Method for Efficient Hybrid Perovskite Solar Cells.

PubMed

Liu, Dong; Wu, Lili; Li, Chunxiu; Ren, Shengqiang; Zhang, Jingquan; Li, Wei; Feng, Lianghuan

2015-08-05

The methylammonium lead halide perovskite solar cells have become very attractive because they can be prepared with low-cost solution-processable technology and their power conversion efficiency have been increasing from 3.9% to 20% in recent years. However, the high performance of perovskite photovoltaic devices are dependent on the complicated process to prepare compact perovskite films with large grain size. Herein, a new method is developed to achieve excellent CH3NH3PbI3-xClx film with fine morphology and crystallization based on one step deposition and two-step annealing process. This method include the spin coating deposition of the perovskite films with the precursor solution of PbI2, PbCl2, and CH3NH3I at the molar ratio 1:1:4 in dimethylformamide (DMF) and the post two-step annealing (TSA). The first annealing is achieved by solvent-induced process in DMF to promote migration and interdiffusion of the solvent-assisted precursor ions and molecules and realize large size grain growth. The second annealing is conducted by thermal-induced process to further improve morphology and crystallization of films. The compact perovskite films are successfully prepared with grain size up to 1.1 μm according to SEM observation. The PL decay lifetime, and the optic energy gap for the film with two-step annealing are 460 ns and 1.575 eV, respectively, while they are 307 and 327 ns and 1.577 and 1.582 eV for the films annealed in one-step thermal and one-step solvent process. On the basis of the TSA process, the photovoltaic devices exhibit the best efficiency of 14% under AM 1.5G irradiation (100 mW·cm(-2)).

Low-temperature wafer direct bonding of silicon and quartz glass by a two-step wet chemical surface cleaning

NASA Astrophysics Data System (ADS)

Wang, Chenxi; Xu, Jikai; Zeng, Xiaorun; Tian, Yanhong; Wang, Chunqing; Suga, Tadatomo

2018-02-01

We demonstrate a facile bonding process for combining silicon and quartz glass wafers by a two-step wet chemical surface cleaning. After a post-annealing at 200 °C, strong bonding interfaces with no defects or microcracks were obtained. On the basis of the detailed surface and bonding interface characterizations, the bonding mechanism was explored and discussed. The amino groups terminated on the cleaned surfaces might contribute to the bonding strength enhancement during the annealing. This cost-effective bonding process has great potentials for silicon- and glass-based heterogeneous integrations without requiring a vacuum system.

Assessment of Chicken Carcass Microbiome Responses During Processing in the Presence of Commercial Antimicrobials Using a Next Generation Sequencing Approach

PubMed Central

Ae Kim, Sun; Hong Park, Si; In Lee, Sang; Owens, Casey M.; Ricke, Steven C.

2017-01-01

The purpose of this study was to 1) identify microbial compositional changes on chicken carcasses during processing, 2) determine the antimicrobial efficacy of peracetic acid (PAA) and Amplon (blend of sulfuric acid and sodium sulfate) at a poultry processing pilot plant scale, and 3) compare microbial communities between chicken carcass rinsates and recovered bacteria from media. Birds were collected from each processing step and rinsates were applied to estimate aerobic plate count (APC) and Campylobacter as well as Salmonella prevalence. Microbiome sequencing was utilized to identify microbial population changes over processing and antimicrobial treatments. Only the PAA treatment exhibited significant reduction of APC at the post chilling step while both Amplon and PAA yielded detectable Campylobacter reductions at all steps. Based on microbiome sequencing, Firmicutes were the predominant bacterial group at the phyla level with over 50% frequency in all steps while the relative abundance of Proteobacteria decreased as processing progressed. Overall microbiota between rinsate and APC plate microbial populations revealed generally similar patterns at the phyla level but they were different at the genus level. Both antimicrobials appeared to be effective on reducing problematic bacteria and microbiome can be utilized to identify optimal indicator microorganisms for enhancing product quality. PMID:28230180

DEFINING THE MANDATE OF PROTEOMICS IN THE POST-GENOMIC ERA: WORKSHOP REPORT

EPA Science Inventory

Research in proteomics is the next step after genomics in understanding life processes at the molecular level. In the largest sense proteomics encompasses knowledge of the structure, function and expression of all proteins in the biochemical or biological contexts of all organism...

Global changes of the RNA-bound proteome during the maternal-to-zygotic transition in Drosophila

PubMed Central

Sysoev, Vasiliy O.; Fischer, Bernd; Frese, Christian K.; Gupta, Ishaan; Krijgsveld, Jeroen; Hentze, Matthias W.; Castello, Alfredo; Ephrussi, Anne

2016-01-01

The maternal-to-zygotic transition (MZT) is a process that occurs in animal embryos at the earliest developmental stages, during which maternally deposited mRNAs and other molecules are degraded and replaced by products of the zygotic genome. The zygotic genome is not activated immediately upon fertilization, and in the pre-MZT embryo post-transcriptional control by RNA-binding proteins (RBPs) orchestrates the first steps of development. To identify relevant Drosophila RBPs organism-wide, we refined the RNA interactome capture method for comparative analysis of the pre- and post-MZT embryos. We determine 523 proteins as high-confidence RBPs, half of which were not previously reported to bind RNA. Comparison of the RNA interactomes of pre- and post-MZT embryos reveals high dynamicity of the RNA-bound proteome during early development, and suggests active regulation of RNA binding of some RBPs. This resource provides unprecedented insight into the system of RBPs that govern the earliest steps of Drosophila development. PMID:27378189

Antibacterial Drug Releasing Materials by Post-Polymerization Surface Modification

NASA Astrophysics Data System (ADS)

Chng, Shuyun; Moloney, Mark G.; Wu, Linda Y. L.

Functional materials are available by the post-polymerization surface modification of diverse polymers in a three-step process mediated, firstly, by carbene insertion chemistry, secondly, by diazonium coupling, and thirdly by modification with a remotely tethered spiropyran unit, and these materials may be used for the reversible binding and release of Penicillin V. Surface loading densities of up to 0.19mmol/g polymer are achievable, leading to materials with higher loading densities and release behavior relative to unmodified controls, and observable antibacterial biocidal activity.

RCRA, superfund and EPCRA hotline training module. Introduction to: Closure/post-closure (40 cfr parts 264/265, subpart g) updated July 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The module explains the difference between closure and post-closure. It lists the types of facilities that are subject to closure/post-closures and defines the difference between partial and final closure. It specifies who submits a closure plan and when a closure plan must be submitted, lists the steps in the process, and states the time frame for submittal. It identifies when and how a closure must be amended. It explains the time frame for notification of closure and the deadlines for beginning and completing closure. It specifies which facilities need contingent post-closure plans and lists and the elements of post-closure andmore » cites the requirements. It specifies the conditions and timing for amending a post-closure plan and states who must certify closure/post-closure.« less

Power ultrasound irradiation during the alkaline etching process of the 2024 aluminum alloy

NASA Astrophysics Data System (ADS)

Moutarlier, V.; Viennet, R.; Rolet, J.; Gigandet, M. P.; Hihn, J. Y.

2015-11-01

Prior to any surface treatment on an aluminum alloy, a surface preparation is necessary. This commonly consists in performing an alkaline etching followed by acid deoxidizing. In this work, the use of power ultrasound irradiation during the etching step on the 2024 aluminum alloy was studied. The etching rate was estimated by weight loss, and the alkaline film formed during the etching step was characterized by glow discharge optical emission spectrometry (GDOES) and scanning electron microscope (SEM). The benefit of power ultrasound during the etching step was confirmed by pitting potential measurement in NaCl solution after a post-treatment (anodizing).

40 CFR 63.12005 - What definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... venting episode that is associated with a single unit operation. A unit operation may have more than one... characterized by a two-step anhydrous polymerization process: the formation of small resin particles in a pre... of the resin particles in a post-polymerization reactor using additional vinyl chloride monomer...

A Three-Step Atomic Layer Deposition Process for SiN x Using Si2Cl6, CH3NH2, and N2 Plasma.

PubMed

Ovanesyan, Rafaiel A; Hausmann, Dennis M; Agarwal, Sumit

2018-06-06

We report a novel three-step SiN x atomic layer deposition (ALD) process using Si 2 Cl 6 , CH 3 NH 2 , and N 2 plasma. In a two-step process, nonhydrogenated chlorosilanes such as Si 2 Cl 6 with N 2 plasmas lead to poor-quality SiN x films that oxidize rapidly. The intermediate CH 3 NH 2 step was therefore introduced in the ALD cycle to replace the NH 3 plasma step with a N 2 plasma, while using Si 2 Cl 6 as the Si precursor. This three-step process lowers the atomic H content and improves the film conformality on high-aspect-ratio nanostructures as Si-N-Si bonds are formed during a thermal CH 3 NH 2 step in addition to the N 2 plasma step. During ALD, the reactive surface sites were monitored using in situ surface infrared spectroscopy. Our infrared spectra show that, on the post-N 2 plasma-treated SiN x surface, Si 2 Cl 6 reacts primarily with the surface -NH 2 species to form surface -SiCl x ( x = 1, 2, or 3) bonds, which are the reactive sites during the CH 3 NH 2 cycle. In the N 2 plasma step, reactive -NH 2 surface species are created because of the surface H available from the -CH 3 groups. At 400 °C, the SiN x films have a growth per cycle of ∼0.9 Å with ∼12 atomic percent H. The films grown on high-aspect-ratio nanostructures have a conformality of ∼90%.

Temporally distinct transcriptional regulation of myocyte dedifferentiation and Myofiber growth during muscle regeneration.

PubMed

Louie, Ke'ale W; Saera-Vila, Alfonso; Kish, Phillip E; Colacino, Justin A; Kahana, Alon

2017-11-09

Tissue regeneration requires a series of steps, beginning with generation of the necessary cell mass, followed by cell migration into damaged area, and ending with differentiation and integration with surrounding tissues. Temporal regulation of these steps lies at the heart of the regenerative process, yet its basis is not well understood. The ability of zebrafish to dedifferentiate mature "post-mitotic" myocytes into proliferating myoblasts that in turn regenerate lost muscle tissue provides an opportunity to probe the molecular mechanisms of regeneration. Following subtotal excision of adult zebrafish lateral rectus muscle, dedifferentiating residual myocytes were collected at two time points prior to cell cycle reentry and compared to uninjured muscles using RNA-seq. Functional annotation (GAGE or K-means clustering followed by GO enrichment) revealed a coordinated response encompassing epigenetic regulation of transcription, RNA processing, and DNA replication and repair, along with protein degradation and translation that would rewire the cellular proteome and metabolome. Selected candidate genes were phenotypically validated in vivo by morpholino knockdown. Rapidly induced gene products, such as the Polycomb group factors Ezh2 and Suz12a, were necessary for both efficient dedifferentiation (i.e. cell reprogramming leading to cell cycle reentry) and complete anatomic regeneration. In contrast, the late activated gene fibronectin was important for efficient anatomic muscle regeneration but not for the early step of myocyte cell cycle reentry. Reprogramming of a "post-mitotic" myocyte into a dedifferentiated myoblast requires a complex coordinated effort that reshapes the cellular proteome and rewires metabolic pathways mediated by heritable yet nuanced epigenetic alterations and molecular switches, including transcription factors and non-coding RNAs. Our studies show that temporal regulation of gene expression is programmatically linked to distinct steps in the regeneration process, with immediate early expression driving dedifferentiation and reprogramming, and later expression facilitating anatomical regeneration.

The effect of glycerol-related osmotic changes on post-thaw motility and acrosomal integrity of ram spermatozoa.

PubMed

Fiser, P S; Fairfull, R W

1989-02-01

Ram semen, collected by artificial vagina, was diluted and processed for long-term storage as described by P. S. Fiser, L. Ainsworth, and R. W. Fairfull (Canad. J. Anim. Sci. 62, 425-428, 1982). The concentration of the cryoprotectant, glycerol, was adjusted to 4% in the diluted semen prior to freezing by a one-step addition at 30 degrees C (Method 1), by cooling the semen to 5 degrees C and addition of the glycerol gradually over 30 min (Method 2), by one-step addition of glycerol prior to equilibration for 2 hr (Method 3), or by cooling to 5 degrees C, followed by a holding period of 2 hr at 5 degrees C, and the one-step addition of glycerol just prior to freezing (Method 4). After thawing, the glycerol concentration of the semen was reduced by stepwise dilution from 4 to 0.4% over 15 or 30 min or by a one-step ten-fold dilution. The average post-thaw percentage of motile spermatozoa was significantly lower after addition of glycerol by Method 1 (39.9%) than when the glycerol was added by the other three methods (range, 44.0-46.4% averaged over the glycerol dilution). The average post-thaw percentage of intact acrosomes (61.2%), highest in semen in which the glycerol was added by Method 2, was not significantly different from those in which glycerol was added to semen by Methods 3 and 4, but it was significantly higher than that found in semen in which the glycerol was added by Method 1 (54.4%). However, when averaged over the method of glycerolation, the post-thaw percentage of motile spermatozoa (range, 43.7-44.2%) and the percentage of intact acrosomes (range, 56.8-59.5%) did not differ significantly in semen subjected to gradual decrease in glycerol concentration and diluent osmolality (over 15 and 30 min) or by a one-step, 10-fold dilution. These data indicate that post-thaw survival of spermatozoa can be influenced by the way in which glycerol is added prior to freezing. However, post-thaw spermatozoa motility and acrosomal integrity can be maintained even after a rapid decrease in glycerol concentration such as that which accompanies insemination or dilution of semen for assessment of motility.

ALMA from the Users' Perspective

NASA Astrophysics Data System (ADS)

Johnson, Kelsey

2010-05-01

After decades of dreaming and preparation, the call for early science with ALMA is just around the corner. The goal of this talk is to illustrate the process of preparing and carrying out a research program with ALMA. This presentation will step through the user interface for proposal preparation, proposal review, project tracking, data acquisition, and post-processing. Examples of the software tools, including the simulator and spectral line catalog, will be included.

Fish scale terrace GaInN/GaN light-emitting diodes with enhanced light extraction

NASA Astrophysics Data System (ADS)

Stark, Christoph J. M.; Detchprohm, Theeradetch; Zhao, Liang; Paskova, Tanya; Preble, Edward A.; Wetzel, Christian

2012-12-01

Non-planar GaInN/GaN light-emitting diodes were epitaxially grown to exhibit steps for enhanced light emission. By means of a large off-cut of the epitaxial growth plane from the c-plane (0.06° to 2.24°), surface morphologies of steps and inclined terraces that resemble fish scale patterns could controllably be achieved. These patterns penetrate the active region without deteriorating the electrical device performance. We find conditions leading to a large increase in light-output power over the virtually on-axis device and over planar sapphire references. The process is found suitable to enhance light extraction even without post-growth processing.

Two-stage anaerobic and post-aerobic mesophilic digestion of sewage sludge: Analysis of process performance and hygienization potential.

PubMed

Tomei, M Concetta; Mosca Angelucci, Domenica; Levantesi, Caterina

2016-03-01

Sequential anaerobic-aerobic digestion has been demonstrated to be effective for enhanced sludge stabilization, in terms of increased solid reduction and improvement of sludge dewaterability. In this study, we propose a modified version of the sequential anaerobic-aerobic digestion process by operating the aerobic step under mesophilic conditions (T=37 °C), in order to improve the aerobic degradation kinetics of soluble and particulate chemical oxygen demand (COD). Process performance has been assessed in terms of "classical parameters" such as volatile solids (VS) removal, biogas production, COD removal, nitrogen species, and polysaccharide and protein fate. The aerobic step was operated under intermittent aeration to achieve nitrogen removal. Aerobic mesophilic conditions consistently increased VS removal, providing 32% additional removal vs. 20% at 20 °C. Similar results were obtained for nitrogen removal, increasing from 64% up to 99% at the higher temperature. Improved sludge dewaterability was also observed with a capillary suction time decrease of ~50% during the mesophilic aerobic step. This finding may be attributable to the decreased protein content in the aerobic digested sludge. The post-aerobic digestion exerted a positive effect on the reduction of microbial indicators while no consistent improvement of hygienization related to the increased temperature was observed. The techno-economic analysis of the proposed digestion layout showed a net cost saving for sludge disposal estimated in the range of 28-35% in comparison to the single-phase anaerobic digestion. Copyright © 2015 Elsevier B.V. All rights reserved.

Rapid oxidation/stabilization technique for carbon foams, carbon fibers and C/C composites

DOEpatents

Tan, Seng; Tan, Cher-Dip

2004-05-11

An enhanced method for the post processing, i.e. oxidation or stabilization, of carbon materials including, but not limited to, carbon foams, carbon fibers, dense carbon-carbon composites, carbon/ceramic and carbon/metal composites, which method requires relatively very short and more effective such processing steps. The introduction of an "oxygen spill over catalyst" into the carbon precursor by blending with the carbon starting material or exposure of the carbon precursor to such a material supplies required oxygen at the atomic level and permits oxidation/stabilization of carbon materials in a fraction of the time and with a fraction of the energy normally required to accomplish such carbon processing steps. Carbon based foams, solids, composites and fiber products made utilizing this method are also described.

Design of a Sub-Picosecond Jitter with Adjustable-Range CMOS Delay-Locked Loop for High-Speed and Low-Power Applications

PubMed Central

Abdulrazzaq, Bilal I.; Ibrahim, Omar J.; Kawahito, Shoji; Sidek, Roslina M.; Shafie, Suhaidi; Yunus, Nurul Amziah Md.; Lee, Lini; Halin, Izhal Abdul

2016-01-01

A Delay-Locked Loop (DLL) with a modified charge pump circuit is proposed for generating high-resolution linear delay steps with sub-picosecond jitter performance and adjustable delay range. The small-signal model of the modified charge pump circuit is analyzed to bring forth the relationship between the DLL’s internal control voltage and output time delay. Circuit post-layout simulation shows that a 0.97 ps delay step within a 69 ps delay range with 0.26 ps Root-Mean Square (RMS) jitter performance is achievable using a standard 0.13 µm Complementary Metal-Oxide Semiconductor (CMOS) process. The post-layout simulation results show that the power consumption of the proposed DLL architecture’s circuit is 0.1 mW when the DLL is operated at 2 GHz. PMID:27690040

Improving enzymatic hydrolysis efficiency of wheat straw through sequential autohydrolysis and alkaline post-extraction.

PubMed

Wu, Xinxing; Huang, Chen; Zhai, Shengcheng; Liang, Chen; Huang, Caoxing; Lai, Chenhuan; Yong, Qiang

2018-03-01

In this work, a two-step pretreatment process of wheat straw was established by combining autohydrolysis pretreatment and alkaline post-extraction. The results showed that employing alkaline post-extraction to autohydrolyzed wheat straw could significantly improve its enzymatic hydrolysis efficiency from 36.0% to 83.7%. Alkaline post-extraction lead to the changes of the structure characteristics of autohydrolyzed wheat straw. Associations between enzymatic hydrolysis efficiency and structure characteristics were also studied. The results showed that the factors of structure characteristics such as delignification, xylan removal yield, crystallinity, accessibility and hydrophobicity are positively related to enzymatic hydrolysis efficiency within a certain range for alkaline post-extracted wheat straw. The results demonstrated that autohydrolysis coupled with alkaline post-extraction is an effective and promising method to gain fermentable sugars from biomass. Copyright © 2017 Elsevier Ltd. All rights reserved.

Improving college science teaching through peer coaching and classroom assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sode, J.R.

Peer coaching involves the observation of one teacher by another. This observation is accompanied by open and honest reflective discussion. The three main components of peer coaching are pre conference (for setting observation guidelines and building trust), observation (the sytematic collection of classroom data), and post conference (a non evaluative examination and discussion of the classroom). The non-evaluative post conference involves an examination of the teaching/learning process that occurred during the observation phase. In effective assessment, information on what and how well students are learning is used to make decisions about overall program improvement and to implement continuous classroom improvement.more » During peer coaching and assessment neither the instructor nor the students are formally evaluated. This session presents a sequential process in which the peer coaching steps of pre conference, observation, and post conference are combined with assessment to provide instructional guidance. An actual cast study, using the student complaint, {open_quotes}Lectures are boring and useless,{close_quotes} is used to demonstrate the process.« less

The conversion of anaerobic digestion waste into biofuels via a novel Thermo-Catalytic Reforming process.

PubMed

Neumann, Johannes; Meyer, Johannes; Ouadi, Miloud; Apfelbacher, Andreas; Binder, Samir; Hornung, Andreas

2016-01-01

Producing energy from biomass and other organic waste residues is essential for sustainable development. Fraunhofer UMSICHT has developed a novel reactor which introduces the Thermo-Catalytic Reforming (TCR®) process. The TCR® is a process which can convert any type of biomass and organic feedstocks into a variety of energy products (char, bio-oil and permanent gases). The aim of this work was to demonstrate this technology using digestate as the feedstock and to quantify the results from the post reforming step. The temperature of a post reformer was varied to achieve optimised fuel products. The hydrogen rich permanent gases produced were maximised at a post reforming temperature of 1023 K. The highly de-oxygenated liquid bio-oil produced contained a calorific value of 35.2 MJ/kg, with significantly improved fuel physical properties, low viscosity and acid number. Overall digestate showed a high potential as feedstock in the Thermo-Catalytic Reforming to produce pyrolysis fuel products of superior quality. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites

NASA Astrophysics Data System (ADS)

Saboori, Abdollah; Pavese, Matteo; Badini, Claudio; Fino, Paolo

2018-01-01

Copper/graphene nanoplatelet (GNP) nanocomposites were produced by a wet mixing method followed by a classical powder metallurgy technique. A qualitative evaluation of the structure of graphene after mixing indicated that wet mixing is an appropriate dispersion method. Thereafter, the effects of two post-processing techniques such as repressing-annealing and hot isostatic pressing (HIP) on density, interfacial bonding, hardness, and thermal and electrical conductivity of the nanocomposites were analyzed. Density evaluations showed that the relative density of specimens increased after the post-processing steps so that after HIPing almost full densification was achieved. The Vickers hardness of specimens increased considerably after the post-processing techniques. The thermal conductivity of pure copper was very low in the case of the as-sintered samples containing 2 to 3 pct porosity and increased considerably to a maximum value in the case of HIPed samples which contained only 0.1 to 0.2 pct porosity. Electrical conductivity measurements showed that by increasing the graphene content electrical conductivity decreased.

Efficient bit sifting scheme of post-processing in quantum key distribution

NASA Astrophysics Data System (ADS)

Li, Qiong; Le, Dan; Wu, Xianyan; Niu, Xiamu; Guo, Hong

2015-10-01

Bit sifting is an important step in the post-processing of quantum key distribution (QKD). Its function is to sift out the undetected original keys. The communication traffic of bit sifting has essential impact on the net secure key rate of a practical QKD system. In this paper, an efficient bit sifting scheme is presented, of which the core is a lossless source coding algorithm. Both theoretical analysis and experimental results demonstrate that the performance of the scheme is approaching the Shannon limit. The proposed scheme can greatly decrease the communication traffic of the post-processing of a QKD system, which means the proposed scheme can decrease the secure key consumption for classical channel authentication and increase the net secure key rate of the QKD system, as demonstrated by analyzing the improvement on the net secure key rate. Meanwhile, some recommendations on the application of the proposed scheme to some representative practical QKD systems are also provided.

Analysis/test correlation using VAWT-SDS on a step-relaxation test for the rotating Sandia 34 m test bed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Argueello, J.G.; Dohrmann, C.R.; Carne, T.G.

The combined analysis/test effort described in this paper compares predictions with measured data from a step-relaxation test in the absence of significant wind-driven aerodynamic loading. The process described here is intended to illustrate a method for validation of time domain codes for structural analysis of wind turbine structures. Preliminary analyses were performed to investigate the transient dynamic response that the rotating Sandia 34 m Vertical Axis Wind Turbine (VAWT) would undergo when one of the two blades was excited by step-relaxation. The calculations served two purposes. The first was for pretest planning to evaluate the relative importance of the variousmore » forces that would be acting on the structure during the test and to determine if the applied force in the step-relaxation would be sufficient to produce an excitation that was distinguishable from that produced by the aerodynamic loads. The second was to provide predictions that could subsequently be compared to the data from the test. The test was carried out specifically to help in the validation of the time-domain structural dynamics code, VAWT-SDS, which predicts the dynamic response of VAWTs subject to transient events. Post-test comparisons with the data were performed and showed a qualitative agreement between pretest predictions and measured response. However, they also showed that there was significantly more damping in the measurements than included in the predictions. Efforts to resolve this difference, including post-test analyses, were undertaken and are reported herein. The overall effort described in this paper represents a major step in the process of arriving at a validated structural dynamics code.« less

Identification of defense-related genes newly-associated with tomato flower abscission

USDA-ARS?s Scientific Manuscript database

The current abscission model suggests the formation of a post-abscission trans-differentiation of a protective layer as the last step of the process. The present report expands the repertoire of genes activated in the tomato flower abscission zone (AZ), which are likely to be involved in defense res...

Alberta's Post-Secondary Education System: Developing the Blueprint for Change.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton.

This paper was prepared as a step in the consultation process to develop a Blueprint for Change that will take postsecondary education in Alberta through the next decade. The Blueprint will identify key strategies to shape future directions and identify priorities for change. This document reflects feedback from stakeholders to a previous…

Action Research: Its Origins and Early Application.

ERIC Educational Resources Information Center

Cook, Stuart W.

This paper contains informal remarks on action research in social psychology from its post World War II origins to its current status. Kurt Lewin first described action research in the 1946 article, "Action Research and Minority Problems," as a three-step process of program planning, program execution, and follow-up evaluation. Ronald Lippitt and…

Quantitative measurement of intact alpha-synuclein proteoforms from post-mortem control and Parkinson's disease brain tissue by intact protein mass spectrometry.

PubMed

Kellie, John F; Higgs, Richard E; Ryder, John W; Major, Anthony; Beach, Thomas G; Adler, Charles H; Merchant, Kalpana; Knierman, Michael D

2014-07-23

A robust top down proteomics method is presented for profiling alpha-synuclein species from autopsied human frontal cortex brain tissue from Parkinson's cases and controls. The method was used to test the hypothesis that pathology associated brain tissue will have a different profile of post-translationally modified alpha-synuclein than the control samples. Validation of the sample processing steps, mass spectrometry based measurements, and data processing steps were performed. The intact protein quantitation method features extraction and integration of m/z data from each charge state of a detected alpha-synuclein species and fitting of the data to a simple linear model which accounts for concentration and charge state variability. The quantitation method was validated with serial dilutions of intact protein standards. Using the method on the human brain samples, several previously unreported modifications in alpha-synuclein were identified. Low levels of phosphorylated alpha synuclein were detected in brain tissue fractions enriched for Lewy body pathology and were marginally significant between PD cases and controls (p = 0.03).

NASA Planning for Orion Multi-Purpose Crew Vehicle Ground Operations

NASA Technical Reports Server (NTRS)

Letchworth, Gary; Schlierf, Roland

2011-01-01

The NASA Orion Ground Processing Team was originally formed by the Kennedy Space Center (KSC) Constellation (Cx) Project Office's Orion Division to define, refine and mature pre-launch and post-landing ground operations for the Orion human spacecraft. The multidisciplined KSC Orion team consisted of KSC civil servant, SAIC, Productivity Apex, Inc. and Boeing-CAPPS engineers, project managers and safety engineers, as well as engineers from Constellation's Orion Project and Lockheed Martin Orion Prime contractor. The team evaluated the Orion design configurations as the spacecraft concept matured between Systems Design Review (SDR), Systems Requirement Review (SRR) and Preliminary Design Review (PDR). The team functionally decomposed prelaunch and post-landing steps at three levels' of detail, or tiers, beginning with functional flow block diagrams (FFBDs). The third tier FFBDs were used to build logic networks and nominal timelines. Orion ground support equipment (GSE) was identified and mapped to each step. This information was subsequently used in developing lower level operations steps in a Ground Operations Planning Document PDR product. Subject matter experts for each spacecraft and GSE subsystem were used to define 5th - 95th percentile processing times for each FFBD step, using the Delphi Method. Discrete event simulations used this information and the logic network to provide processing timeline confidence intervals for launch rate assessments. The team also used the capabilities of the KSC Visualization Lab, the FFBDs and knowledge of the spacecraft, GSE and facilities to build visualizations of Orion pre-launch and postlanding processing at KSC. Visualizations were a powerful tool for communicating planned operations within the KSC community (i.e., Ground Systems design team), and externally to the Orion Project, Lockheed Martin spacecraft designers and other Constellation Program stakeholders during the SRR to PDR timeframe. Other operations planning tools included Kaizen/Lean events, mockups and human factors analysis. The majority of products developed by this team are applicable as KSC prepares 21st Century Ground Systems for the Orion Multi-Purpose Crew Vehicle and Space Launch System.

Insertion of lithium into electrochromic devices after completion

DOEpatents

Berland, Brian Spencer; Lanning, Bruce Roy; Frey, Jonathan Mack; Barrett, Kathryn Suzanne; DuPont, Paul Damon; Schaller, Ronald William

2015-12-22

The present disclosure describes methods of inserting lithium into an electrochromic device after completion. In the disclosed methods, an ideal amount of lithium can be added post-fabrication to maximize or tailor the free lithium ion density of a layer or the coloration range of a device. Embodiments are directed towards a method to insert lithium into the main device layers of an electrochromic device as a post-processing step after the device has been manufactured. In an embodiment, the methods described are designed to maximize the coloration range while compensating for blind charge loss.

Security of coherent-state quantum cryptography in the presence of Gaussian noise

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heid, Matthias; Luetkenhaus, Norbert

2007-08-15

We investigate the security against collective attacks of a continuous variable quantum key distribution scheme in the asymptotic key limit for a realistic setting. The quantum channel connecting the two honest parties is assumed to be lossy and imposes Gaussian noise on the observed quadrature distributions. Secret key rates are given for direct and reverse reconciliation schemes including post-selection in the collective attack scenario. The effect of a nonideal error correction and two-way communication in the classical post-processing step is also taken into account.

9 CFR 114.9 - Outline of Production guidelines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... each satisfactory test. A. Purity. B. Safety. C. Potency. D. Other tests. VI. Post preparatory steps. A... test. A. Purity. B. Safety. C. Potency. D. Moisture, if desiccated. E. Any other tests. VI. Post.... Potency. D. Any other tests. E. Include any additional pertinent information. IV. Post preparatory steps...

9 CFR 114.9 - Outline of Production guidelines.

Code of Federal Regulations, 2012 CFR

2012-01-01

... each satisfactory test. A. Purity. B. Safety. C. Potency. D. Other tests. VI. Post preparatory steps. A... test. A. Purity. B. Safety. C. Potency. D. Moisture, if desiccated. E. Any other tests. VI. Post.... Potency. D. Any other tests. E. Include any additional pertinent information. IV. Post preparatory steps...

9 CFR 114.9 - Outline of Production guidelines.

Code of Federal Regulations, 2013 CFR

2013-01-01

... each satisfactory test. A. Purity. B. Safety. C. Potency. D. Other tests. VI. Post preparatory steps. A... test. A. Purity. B. Safety. C. Potency. D. Moisture, if desiccated. E. Any other tests. VI. Post.... Potency. D. Any other tests. E. Include any additional pertinent information. IV. Post preparatory steps...

9 CFR 114.9 - Outline of Production guidelines.

Code of Federal Regulations, 2011 CFR

2011-01-01

... each satisfactory test. A. Purity. B. Safety. C. Potency. D. Other tests. VI. Post preparatory steps. A... test. A. Purity. B. Safety. C. Potency. D. Moisture, if desiccated. E. Any other tests. VI. Post.... Potency. D. Any other tests. E. Include any additional pertinent information. IV. Post preparatory steps...

9 CFR 114.9 - Outline of Production guidelines.

Code of Federal Regulations, 2014 CFR

2014-01-01

... each satisfactory test. A. Purity. B. Safety. C. Potency. D. Other tests. VI. Post preparatory steps. A... test. A. Purity. B. Safety. C. Potency. D. Moisture, if desiccated. E. Any other tests. VI. Post.... Potency. D. Any other tests. E. Include any additional pertinent information. IV. Post preparatory steps...

Errors in clinical laboratories or errors in laboratory medicine?

PubMed

Plebani, Mario

2006-01-01

Laboratory testing is a highly complex process and, although laboratory services are relatively safe, they are not as safe as they could or should be. Clinical laboratories have long focused their attention on quality control methods and quality assessment programs dealing with analytical aspects of testing. However, a growing body of evidence accumulated in recent decades demonstrates that quality in clinical laboratories cannot be assured by merely focusing on purely analytical aspects. The more recent surveys on errors in laboratory medicine conclude that in the delivery of laboratory testing, mistakes occur more frequently before (pre-analytical) and after (post-analytical) the test has been performed. Most errors are due to pre-analytical factors (46-68.2% of total errors), while a high error rate (18.5-47% of total errors) has also been found in the post-analytical phase. Errors due to analytical problems have been significantly reduced over time, but there is evidence that, particularly for immunoassays, interference may have a serious impact on patients. A description of the most frequent and risky pre-, intra- and post-analytical errors and advice on practical steps for measuring and reducing the risk of errors is therefore given in the present paper. Many mistakes in the Total Testing Process are called "laboratory errors", although these may be due to poor communication, action taken by others involved in the testing process (e.g., physicians, nurses and phlebotomists), or poorly designed processes, all of which are beyond the laboratory's control. Likewise, there is evidence that laboratory information is only partially utilized. A recent document from the International Organization for Standardization (ISO) recommends a new, broader definition of the term "laboratory error" and a classification of errors according to different criteria. In a modern approach to total quality, centered on patients' needs and satisfaction, the risk of errors and mistakes in pre- and post-examination steps must be minimized to guarantee the total quality of laboratory services.

A practical guide for the identification of major sulcogyral structures of the human cortex.

PubMed

Destrieux, Christophe; Terrier, Louis Marie; Andersson, Frédéric; Love, Scott A; Cottier, Jean-Philippe; Duvernoy, Henri; Velut, Stéphane; Janot, Kevin; Zemmoura, Ilyess

2017-05-01

The precise sulcogyral localization of cortical lesions is mandatory to improve communication between practitioners and to predict and prevent post-operative deficits. This process, which assumes a good knowledge of the cortex anatomy and a systematic analysis of images, is, nevertheless, sometimes neglected in the neurological and neurosurgical training. This didactic paper proposes a brief overview of the sulcogyral anatomy, using conventional MR-slices, and also reconstructions of the cortical surface after a more or less extended inflation process. This method simplifies the cortical anatomy by removing part of the cortical complexity induced by the folding process, and makes it more understandable. We then reviewed several methods for localizing cortical structures, and proposed a three-step identification: after localizing the lateral, medial or ventro-basal aspect of the hemisphere (step 1), the main interlobar sulci were located to limit the lobes (step 2). Finally, intralobar sulci and gyri were identified (step 3) thanks to the same set of rules. This paper does not propose any new identification method but should be regarded as a set of practical guidelines, useful in daily clinical practice, for detecting the main sulci and gyri of the human cortex.

Plantarflexion moment is a contributor to step length after-effect following walking on a split-belt treadmill in individuals with stroke and healthy individuals.

PubMed

Lauzière, Séléna; Miéville, Carole; Betschart, Martina; Duclos, Cyril; Aissaoui, Rachid; Nadeau, Sylvie

2014-10-01

To assess plantarflexion moment and hip joint moment after-effects following walking on a split-belt treadmill in healthy individuals and individuals post-stroke. Cross-sectional study. Ten healthy individuals (mean age 57.6 years (standard deviation; SD 17.2)) and twenty individuals post-stroke (mean age 49.3 years (SD 13.2)). Participants walked on an instrumented split-belt treadmill under 3 gait periods: i) baseline (tied-belt); ii) adaptation (split-belt); and iii) post-adaptation (tied-belt). Participants post-stroke performed the protocol with the paretic and nonparetic leg on the faster belt when belts were split. Kinematic data were recorded with the Optotrak system and ground reaction forces were collected via the instrumented split-belt treadmill. In both groups, the fast plantarflexion moment was reduced and the slow plantarflexion moment was increased from mid-stance to toe-off in the post-adaptation period. Significant relationships were found between the plantarflexion moment and contralateral step length. Split-belt treadmills could be useful for restoring step length symmetry in individuals post-stroke who present with a longer paretic step length because the use of this type of intervention increases paretic plantarflexion moments. This intervention might be less recommended for individuals post-stroke with a shorter paretic step length because it reduces the paretic plantarflexion moment.

Imposed Thermal Fatigue and Post-Thermal-Cycle Wear Resistance of Biomimetic Gray Cast Iron by Laser Treatment

NASA Astrophysics Data System (ADS)

Sui, Qi; Zhou, Hong; Zhang, Deping; Chen, Zhikai; Zhang, Peng

2017-08-01

The present study aims to create coupling biomimetic units on gray cast iron substrate by laser surface treatment (LST). LSTs for single-step (LST1) and two-step (LST2) processes, were carried out on gray cast iron in different media (air and water). Their effects on microstructure, thermal fatigue, and post-thermal-cycle wear (PTW) resistance on the specimens were studied. The tests were carried out to examine the influence of crack-resistance behavior as well as the biomimetic surface on its post-thermal-cycle wear behavior and different units, with different laser treatments for comparison. Results showed that LST2 enhanced the PTW behaviors of gray cast iron, which then led to an increase in its crack resistance. Among the treated cast irons, the one treated by LST2 in air showed the lowest residual stress, due to the positive effect of the lower steepness of the thermal gradient. Moreover, the same specimen showed the best PTW performance, due to its superior crack resistance and higher hardness as a result of it.

Step-by-step strategy in the management of residual hepatolithiasis using post-operative cholangioscopy

PubMed Central

Wen, Xu-dong; Wang, Tao; Huang, Zhu; Zhang, Hong-jian; Zhang, Bing-yin; Tang, Li-jun; Liu, Wei-hui

2017-01-01

Hepatolithiasis is the presence of calculi within the intrahepatic bile duct specifically located proximal to the confluence of the left and right hepatic ducts. The ultimate goal of hepatolithiasis treatment is the complete removal of the stone, the correction of the associated strictures and the prevention of recurrent cholangitis. Although hepatectomy could effectively achieve the above goals, it can be restricted by the risk of insufficient residual liver volume, and has a 15.6% rate of residual hepatolithiasis. With improvements in minimally invasive surgery, post-operative cholangioscopy (POC), provides an additional option for hepatolithiasis treatment with higher clearance rate and fewer severe complications. POC is very safe, and can be performed repeatedly until full patient benefit is achieved. During POC three main steps are accomplished: first, the analysis of the residual hepatolithiasis distribution indirectly by imaging methods or directly endoscopic observation; second, the establishment of the surgical pathway to relieve the strictures; and third, the removal of the stone by a combination of different techniques such as simple basket extraction, mechanical fragmentation, electrohydraulic lithotripsy or laser lithotripsy, among others. In summary, a step-by-step strategy of POC should be put forward to standardize the procedures, especially when dealing with complicated residual hepatolithiasis. This review briefly summarizes the classification, management and complications of hepatolithiasis during the POC process. PMID:29147136

Post-growth process for flexible CdS/CdTe thin film solar cells with high specific power.

PubMed

Cho, Eunwoo; Kang, Yoonmook; Kim, Donghwan; Kim, Jihyun

2016-05-16

We demonstrated a flexible CdS/CdTe thin film solar cell with high specific power of approximately 254 W/kg. A flexible and ultra-light weight CdS/CdTe cell treated with pre-NP etch process exhibited high conversion efficiency of 13.56% in superstrate configuration. Morphological, structural and optical changes of CdS/CdTe thin films were characterized when pre-NP etch step was incorporated to the conventional post-deposition process. Improvement of photovoltaic parameters can be attributed to the removal of the oxide and the formation of Te-rich layer, which benefit the activation process. Pre-NP etched cell maintained their flexibility and performance under the repeated tensile strain of 0.13%. Our method can pave a way for manufacturing flexible CdS/CdTe thin film solar cells with high specific power for mobile and aerospace applications.

Technology to improve quality and accountability.

PubMed

Kay, Jonathan

2006-01-01

A body of evidence has been accumulated to demonstrate that current practice is not sufficiently safe for several stages of central laboratory testing. In particular, while analytical and perianalytical steps that take place within the laboratory are subjected to quality control procedures, this is not the case for several pre- and post-analytical steps. The ubiquitous application of auto-identification technology seems to represent a valuable tool for reducing error rates. A series of projects in Oxford has attempted to improve processes which support several areas of laboratory medicine, including point-of-care testing, blood transfusion, delivery and interpretation of reports, and support of decision-making by clinicians. The key tools are auto-identification, Internet communication technology, process re-engineering, and knowledge management.

RELBET 4.0 user's guide

NASA Technical Reports Server (NTRS)

Cerbins, F. C.; Huysman, B. P.; Knoedler, J. K.; Kwong, P. S.; Pieniazek, L. A.; Strom, S. W.

1986-01-01

This manual describes the operation and use of RELBET 4.0 implemented on the Hewlett Packard model 9000. The RELBET System is an integrated collection of computer programs which support the analysis and post-flight reconstruction of vehicle to vehicle relative trajectories of two on-orbit free-flying vehicles: the Space Shuttle Orbiter and some other free-flyer. The manual serves both as a reference and as a training guide. Appendices provide experienced users with details and full explanations of program usage. The body of the manual introduces new users to the system by leading them through a step by step example of a typical production. This should equip the new user both to execute a typical production process and to understand the most significant variables in that process.

Using Resin-Based 3D Printing to Build Geometrically Accurate Proxies of Porous Sedimentary Rocks.

PubMed

Ishutov, Sergey; Hasiuk, Franciszek J; Jobe, Dawn; Agar, Susan

2018-05-01

Three-dimensional (3D) printing is capable of transforming intricate digital models into tangible objects, allowing geoscientists to replicate the geometry of 3D pore networks of sedimentary rocks. We provide a refined method for building scalable pore-network models ("proxies") using stereolithography 3D printing that can be used in repeated flow experiments (e.g., core flooding, permeametry, porosimetry). Typically, this workflow involves two steps, model design and 3D printing. In this study, we explore how the addition of post-processing and validation can reduce uncertainty in the 3D-printed proxy accuracy (difference of proxy geometry from the digital model). Post-processing is a multi-step cleaning of porous proxies involving pressurized ethanol flushing and oven drying. Proxies are validated by: (1) helium porosimetry and (2) digital measurements of porosity from thin-section images of 3D-printed proxies. 3D printer resolution was determined by measuring the smallest open channel in 3D-printed "gap test" wafers. This resolution (400 µm) was insufficient to build porosity of Fontainebleau sandstone (∼13%) from computed tomography data at the sample's natural scale, so proxies were printed at 15-, 23-, and 30-fold magnifications to validate the workflow. Helium porosities of the 3D-printed proxies differed from digital calculations by up to 7% points. Results improved after pressurized flushing with ethanol (e.g., porosity difference reduced to ∼1% point), though uncertainties remain regarding the nature of sub-micron "artifact" pores imparted by the 3D printing process. This study shows the benefits of including post-processing and validation in any workflow to produce porous rock proxies. © 2017, National Ground Water Association.

fMRI paradigm designing and post-processing tools

PubMed Central

James, Jija S; Rajesh, PG; Chandran, Anuvitha VS; Kesavadas, Chandrasekharan

2014-01-01

In this article, we first review some aspects of functional magnetic resonance imaging (fMRI) paradigm designing for major cognitive functions by using stimulus delivery systems like Cogent, E-Prime, Presentation, etc., along with their technical aspects. We also review the stimulus presentation possibilities (block, event-related) for visual or auditory paradigms and their advantage in both clinical and research setting. The second part mainly focus on various fMRI data post-processing tools such as Statistical Parametric Mapping (SPM) and Brain Voyager, and discuss the particulars of various preprocessing steps involved (realignment, co-registration, normalization, smoothing) in these software and also the statistical analysis principles of General Linear Modeling for final interpretation of a functional activation result. PMID:24851001

Additive Manufacturing Consolidation of Low-Cost Water Atomized Steel Powder Using Micro-Induction Sintering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, William G.; Rios, Orlando; U

ORNL worked with Grid Logic Inc to demonstrate micro induction sintering (MIS) and binder decomposition of steel powders. It was shown that MIS effectively emits spatially confined electromagnetic energy that is directly coupled to metallic powders resulting in resistive heating of individual particles. The non-uniformity of particle morphology and distribution of the water atomized steel powders resulted in inefficient transfer of energy. It was shown that adhering the particles together using polymer binders resulted in more efficient coupling. Using the MIS processes, debinding and sintering could be done in a single step. When combined with another system, such as binder-jet,more » this could reduce the amount of required post-processing. An invention disclosure was filed on hybrid systems that use MIS to reduce the amount of required post-processing.« less

Embedded, real-time UAV control for improved, image-based 3D scene reconstruction

Treesearch

Jean Liénard; Andre Vogs; Demetrios Gatziolis; Nikolay Strigul

2016-01-01

Unmanned Aerial Vehicles (UAVs) are already broadly employed for 3D modeling of large objects such as trees and monuments via photogrammetry. The usual workflow includes two distinct steps: image acquisition with UAV and computationally demanding postflight image processing. Insufficient feature overlaps across images is a common shortcoming in post-flight image...

A novel two-step ultrasound post-assisted lye peeling regime for tomatoes: Reducing pollution while improving product yield and quality.

PubMed

Gao, Ruiping; Ye, Fayin; Lu, Zhiqiang; Wang, Jiajia; Li Shen, Xiao; Zhao, Guohua

2018-07-01

In this paper, the effects and mechanisms of a novel two-step tomato peeling method, hot lye with a post-assistance of ultrasound, were investigated. The present work aims to improve the environmental friendliness of the conventional hot lye tomato peeling method (10% w/v, 97 °C, 45 s). The results showed that 4% (w/v) lye treatment at 97 °C for 30 s with a post-assistance of a 31.97 W/L ultrasound treatment at 70 °C for 50 s achieved a 100% peelability. In this scenario, the peeling yield and lycopene content in the peeled product were significantly higher than the peeling yield and lycopene content with the conventional hot lye peeling method. The present two-step peeling method was concluded with a mechanism of chemico-mechanical synergism, in which the hot lye functions mainly in a chemical way while the ultrasound is a mechanical process. Especially from the lye side, this work first demonstrated that the lye penetrated across the tomato skin via a pitting model rather than evenly. The findings reported in this paper not only provide a novel tomato peeling method with significant environmental benefits but also discover new clues to the peeling mechanism using hot lye. Copyright © 2018 Elsevier B.V. All rights reserved.

One Stop Post Op cardiac surgery recovery--a proven success.

PubMed

Joyce, L; Pandolph, P

2001-01-01

The One Stop Post Op model for open heart surgery recovery is an innovative approach to post op care utilized in only a few facilities in the country. This model calls for an integration of acute ICU and step-down phases of care, thus changing the paradigm for nursing care of the open heart surgery patient. Typically, hospitals incur inefficiencies transferring the patient through multiple levels of care, thus resulting in a "disconnect" as new caregivers relearn the patient's care requirements and special needs. The construction of a "one stop" unit allows the patient to remain stationary while the service level changes to accommodate changing care needs. The cardiac "one stop" model is similar to the LDRP concept for obstetrical care. The One Stop Post Op patient rooms are designed to accommodate every level of patient acuity. All rooms meet the regulations for critical care room design, however this is where the aesthetic similarity ends. The patient environment looks more like hotel rooms rather than the traditional ICU setting. Cabinets designed to cover medical gases, in the room's private bathrooms and comfortable furnishings help to create a patient focused environment conducive to recovery. This model has been utilized by several facilities and has demonstrated clear clinical and economic advantages for patients, families, and health care providers. Implementing an open heart surgery (OHS) program presents the opportunity for several community based hospitals to challenge the way they have been providing patient care and establish an innovative approach to post surgery patient care. The One Stop Post Op cardiovascular recovery unit is designed to receive the OHS patient directly from the operating room and to be the "care unit" for the patient's entire stay. Patient flow, quality monitoring and caregiver acceptance in this unit requires new paradigms from the traditional two or three step post OHS care delivery process. The One Stop Post Op model focuses the delivery of care on the patient. With proven success in clinical outcomes, patient, physician and caregiver satisfaction, it is anticipated that this innovative approach will drive hospitals to integrate clinical process with physical planning in the future.

TagDust2: a generic method to extract reads from sequencing data.

PubMed

Lassmann, Timo

2015-01-28

Arguably the most basic step in the analysis of next generation sequencing data (NGS) involves the extraction of mappable reads from the raw reads produced by sequencing instruments. The presence of barcodes, adaptors and artifacts subject to sequencing errors makes this step non-trivial. Here I present TagDust2, a generic approach utilizing a library of hidden Markov models (HMM) to accurately extract reads from a wide array of possible read architectures. TagDust2 extracts more reads of higher quality compared to other approaches. Processing of multiplexed single, paired end and libraries containing unique molecular identifiers is fully supported. Two additional post processing steps are included to exclude known contaminants and filter out low complexity sequences. Finally, TagDust2 can automatically detect the library type of sequenced data from a predefined selection. Taken together TagDust2 is a feature rich, flexible and adaptive solution to go from raw to mappable NGS reads in a single step. The ability to recognize and record the contents of raw reads will help to automate and demystify the initial, and often poorly documented, steps in NGS data analysis pipelines. TagDust2 is freely available at: http://tagdust.sourceforge.net .

Should adhesive debonding be simulated for intra-radicular post stress analyses?

PubMed

Caldas, Ricardo A; Bacchi, Atais; Barão, Valentim A R; Versluis, Antheunis

2018-06-23

Elucidate the influence of debonding on stress distribution and maximum stresses for intra-radicular restorations. Five intra-radicular restorations were analyzed by finite element analysis (FEA): MP=metallic cast post core; GP=glass fiber post core; PP=pre-fabricated metallic post core; RE=resin endocrowns; CE=single piece ceramic endocrown. Two cervical preparations were considered: no ferule (f 0 ) and 2mm ferule (f 1 ). The simulation was conducted in three steps: (1) intact bonds at all contacts; (2) bond failure between crown and tooth; (3) bond failure among tooth, post and crown interfaces. Contact friction and separation between interfaces was modeled where bond failure occurred. Mohr-Coulomb stress ratios (σ MC ratio ) and fatigue safety factors (SF) for dentin structure were compared with published strength values, fatigue life, and fracture patterns of teeth with intra-radicular restorations. The σ MC ratio showed no differences among models at first step. The second step increased σ MC ratio at the ferule compared to step 1. At the third step, the σ MC ratio and SF for f 0 models were highly influenced by post material. CE and RE models had the highest values for σ MC ratio and lower SF. MP had the lowest σ MC ratio and higher SF. The f 1 models showed no relevant differences among them at the third step. FEA most closely predicted failure performance of intra-radicular posts when frictional contact was modeled. Results of analyses where all interfaces are assumed to be perfectly bonded should be considered with caution. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

In vitro evaluation of endodontic posts.

PubMed

Drummond, J L

2000-05-01

To compare stainless steel posts and three different fibrous posts with respect to pullout (shear) strength from extracted third molars embedded in denture acrylic. Post space was prepared and the posts cemented with a resin cement according to manufacturer's instructions. Single step and multi-step dentin bonding systems were also evaluated. The testing was in tension at a loading rate of 2 mm/min. The statistical analysis indicated no significant difference in the pullout (shear) strength between any of the post groups tested. Also evaluated was the flexure strength of the fibrous posts before and after thermal cycling. Statistical analysis indicated a significant decrease in flexure strength for the respective fibrous posts following thermal cycling.

Post-activation of in situ Bsbnd F codoped g-C3N4 for enhanced photocatalytic H2 evolution

NASA Astrophysics Data System (ADS)

Cui, Yanjuan; Wang, Hao; Yang, Chuanfeng; Li, Ming; Zhao, Yimeng; Chen, Fangyan

2018-05-01

Porous graphitic carbon nitride polymer (p-CN-BF) with enhanced photoproduction of H2 from water was prepared by a two-step treatment process including in-situ Boron and fluorine codoping using [Emim]BF4 as dopants followed by post-calcination in air. Several techniques were employed to characterize the modified structure and elucidate the doping state of B and F. It was shown that in-situ doping method is necessary for efficient doping of heteroatoms into the molecular composition of CN. The difference of doping state of B and F was that B doping primary existing in the inside skeleton of CN, but F doping merely presents in the surface layer. The inside doped B made for the enhanced visible light absorption and the production of uniform porous structure during post-sintering process. By the synergistic effect of Bsbnd F codoping and post-activation, p-CN-BF showed much enhanced photoelectron generation, transmission and separation, therefore, it performs high photocatalytic activity for H2 evolution (351 μmol h-1), which was 13 and 5 times higher than samples only modified by Bsbnd F codoping (CN-BF) or post-annealing (P-CN).

Influence of Age, Maturity, and Body Size on the Spatiotemporal Determinants of Maximal Sprint Speed in Boys.

PubMed

Meyers, Robert W; Oliver, Jon L; Hughes, Michael G; Lloyd, Rhodri S; Cronin, John B

2017-04-01

Meyers, RW, Oliver, JL, Hughes, MG, Lloyd, RS, and Cronin, JB. Influence of age, maturity, and body size on the spatiotemporal determinants of maximal sprint speed in boys. J Strength Cond Res 31(4): 1009-1016, 2017-The aim of this study was to investigate the influence of age, maturity, and body size on the spatiotemporal determinants of maximal sprint speed in boys. Three-hundred and seventy-five boys (age: 13.0 ± 1.3 years) completed a 30-m sprint test, during which maximal speed, step length, step frequency, contact time, and flight time were recorded using an optical measurement system. Body mass, height, leg length, and a maturity offset represented somatic variables. Step frequency accounted for the highest proportion of variance in speed (∼58%) in the pre-peak height velocity (pre-PHV) group, whereas step length explained the majority of the variance in speed (∼54%) in the post-PHV group. In the pre-PHV group, mass was negatively related to speed, step length, step frequency, and contact time; however, measures of stature had a positive influence on speed and step length yet a negative influence on step frequency. Speed and step length were also negatively influence by mass in the post-PHV group, whereas leg length continued to positively influence step length. The results highlighted that pre-PHV boys may be deemed step frequency reliant, whereas those post-PHV boys may be marginally step length reliant. Furthermore, the negative influence of body mass, both pre-PHV and post-PHV, suggests that training to optimize sprint performance in youth should include methods such as plyometric and strength training, where a high neuromuscular focus and the development force production relative to body weight are key foci.

Second-Order Biomimicry: In Situ Oxidative Self-Processing Converts Copper(I)/Diamine Precursor into a Highly Active Aerobic Oxidation Catalyst.

PubMed

McCann, Scott D; Lumb, Jean-Philip; Arndtsen, Bruce A; Stahl, Shannon S

2017-04-26

A homogeneous Cu-based catalyst system consisting of [Cu(MeCN) 4 ]PF 6 , N , N '-di- tert -butylethylenediamine (DBED), and p -( N , N -dimethylamino)pyridine (DMAP) mediates efficient aerobic oxidation of alcohols. Mechanistic study of this reaction shows that the catalyst undergoes an in situ oxidative self-processing step, resulting in conversion of DBED into a nitroxyl that serves as an efficient cocatalyst for aerobic alcohol oxidation. Insights into this behavior are gained from kinetic studies, which reveal an induction period at the beginning of the reaction that correlates with the oxidative self-processing step, EPR spectroscopic analysis of the catalytic reaction mixture, which shows the buildup of the organic nitroxyl species during steady state turnover, and independent synthesis of oxygenated DBED derivatives, which are shown to serve as effective cocatalysts and eliminate the induction period in the reaction. The overall mechanism bears considerable resemblance to enzymatic reactivity. Most notable is the "oxygenase"-type self-processing step that mirrors generation of catalytic cofactors in enzymes via post-translational modification of amino acid side chains. This higher-order function within a synthetic catalyst system presents new opportunities for the discovery and development of biomimetic catalysts.

A Bayesian modelling method for post-processing daily sub-seasonal to seasonal rainfall forecasts from global climate models and evaluation for 12 Australian catchments

NASA Astrophysics Data System (ADS)

Schepen, Andrew; Zhao, Tongtiegang; Wang, Quan J.; Robertson, David E.

2018-03-01

Rainfall forecasts are an integral part of hydrological forecasting systems at sub-seasonal to seasonal timescales. In seasonal forecasting, global climate models (GCMs) are now the go-to source for rainfall forecasts. For hydrological applications however, GCM forecasts are often biased and unreliable in uncertainty spread, and calibration is therefore required before use. There are sophisticated statistical techniques for calibrating monthly and seasonal aggregations of the forecasts. However, calibration of seasonal forecasts at the daily time step typically uses very simple statistical methods or climate analogue methods. These methods generally lack the sophistication to achieve unbiased, reliable and coherent forecasts of daily amounts and seasonal accumulated totals. In this study, we propose and evaluate a Rainfall Post-Processing method for Seasonal forecasts (RPP-S), which is based on the Bayesian joint probability modelling approach for calibrating daily forecasts and the Schaake Shuffle for connecting the daily ensemble members of different lead times. We apply the method to post-process ACCESS-S forecasts for 12 perennial and ephemeral catchments across Australia and for 12 initialisation dates. RPP-S significantly reduces bias in raw forecasts and improves both skill and reliability. RPP-S forecasts are also more skilful and reliable than forecasts derived from ACCESS-S forecasts that have been post-processed using quantile mapping, especially for monthly and seasonal accumulations. Several opportunities to improve the robustness and skill of RPP-S are identified. The new RPP-S post-processed forecasts will be used in ensemble sub-seasonal to seasonal streamflow applications.

Real-Time Visualization of an HPF-based CFD Simulation

NASA Technical Reports Server (NTRS)

Kremenetsky, Mark; Vaziri, Arsi; Haimes, Robert; Chancellor, Marisa K. (Technical Monitor)

1996-01-01

Current time-dependent CFD simulations produce very large multi-dimensional data sets at each time step. The visual analysis of computational results are traditionally performed by post processing the static data on graphics workstations. We present results from an alternate approach in which we analyze the simulation data in situ on each processing node at the time of simulation. The locally analyzed results, usually more economical and in a reduced form, are then combined and sent back for visualization on a graphics workstation.

Improving crystallization and electron mobility of indium tin oxide by carbon dioxide and hydrogen dual-step plasma treatment

NASA Astrophysics Data System (ADS)

Wang, Fengyou; Du, Rongchi; Ren, Qianshang; Wei, Changchun; Zhao, Ying; Zhang, Xiaodan

2017-12-01

Obtaining high conductivity indium tin oxide (ITO) films simultaneously with a "soft-deposited" (low temperature, low ions bombardment) and cost-efficient deposition process are critical aspect for versatile photo-electronic devices application. Usually, the low-cost "soft-deposited" process could be achieved via evaporation technique, but with scarifying the conductivity of the films. Here, we show a CO2 and H2 two-step plasma (TSP) post-treatment applied to ITO films prepared by reactive thermal evaporation (RTE), allows to meet the special trade-off between the deposition techniques and the electrical properties. Upon treatment, an increase in electron concentration and electron mobility is observed, which subsequently resulting a low sheet resistivity. The mobility reaches high values of 80.9 cm2/Vs for the TSP treated ∼100 nm thickness samples. From a combination of X-ray photoelectron spectroscopy and opto-electronic measurements, it demonstrated that: during the TSP process, the first-step CO2 plasma treatment could promote the crystallinity of the RTE ITO films. While the electron traps density at grain boundaries of polycrystalline RTE ITO films could be passivated by hydrogen atom during the second-step H2 plasma treatment. These results inspired that the TSP treatment process has significant application prospects owing to the outstanding electrical properties enhancement for "soft-deposited" RTE ITO films.

Applying Nanoscale Kirkendall Diffusion for Template-Free, Kilogram-Scale Production of SnO2 Hollow Nanospheres via Spray Drying System

PubMed Central

Cho, Jung Sang; Ju, Hyeon Seok; Kang, Yun Chan

2016-01-01

A commercially applicable and simple process for the preparation of aggregation-free metal oxide hollow nanospheres is developed by applying nanoscale Kirkendall diffusion to a large-scale spray drying process. The precursor powders prepared by spray drying are transformed into homogeneous metal oxide hollow nanospheres through a simple post-treatment process. Aggregation-free SnO2 hollow nanospheres are selected as the first target material for lithium ion storage applications. Amorphous carbon microspheres with uniformly dispersed Sn metal nanopowder are prepared in the first step of the post-treatment process under a reducing atmosphere. The post-treatment of the Sn-C composite powder at 500 °C under an air atmosphere produces carbon- and aggregation-free SnO2 hollow nanospheres through nanoscale Kirkendall diffusion. The hollow and filled SnO2 nanopowders exhibit different cycling performances, with their discharge capacities after 300 cycles being 643 and 280 mA h g−1, respectively, at a current density of 2 A g−1. The SnO2 hollow nanospheres with high structural stability exhibit superior cycling and rate performances for lithium ion storage compared to the filled ones. PMID:27033088

Applying Nanoscale Kirkendall Diffusion for Template-Free, Kilogram-Scale Production of SnO2 Hollow Nanospheres via Spray Drying System

NASA Astrophysics Data System (ADS)

Cho, Jung Sang; Ju, Hyeon Seok; Kang, Yun Chan

2016-04-01

A commercially applicable and simple process for the preparation of aggregation-free metal oxide hollow nanospheres is developed by applying nanoscale Kirkendall diffusion to a large-scale spray drying process. The precursor powders prepared by spray drying are transformed into homogeneous metal oxide hollow nanospheres through a simple post-treatment process. Aggregation-free SnO2 hollow nanospheres are selected as the first target material for lithium ion storage applications. Amorphous carbon microspheres with uniformly dispersed Sn metal nanopowder are prepared in the first step of the post-treatment process under a reducing atmosphere. The post-treatment of the Sn-C composite powder at 500 °C under an air atmosphere produces carbon- and aggregation-free SnO2 hollow nanospheres through nanoscale Kirkendall diffusion. The hollow and filled SnO2 nanopowders exhibit different cycling performances, with their discharge capacities after 300 cycles being 643 and 280 mA h g-1, respectively, at a current density of 2 A g-1. The SnO2 hollow nanospheres with high structural stability exhibit superior cycling and rate performances for lithium ion storage compared to the filled ones.

Microarc oxidation coating covered Ti implants with micro-scale gouges formed by a multi-step treatment for improving osseointegration.

PubMed

Bai, Yixin; Zhou, Rui; Cao, Jianyun; Wei, Daqing; Du, Qing; Li, Baoqiang; Wang, Yaming; Jia, Dechang; Zhou, Yu

2017-07-01

The sub-microporous microarc oxidation (MAO) coating covered Ti implant with micro-scale gouges has been fabricated via a multi-step MAO process to overcome the compromised bone-implant integration. The as-prepared implant has been further mediated by post-heat treatment to compare the effects of -OH functional group and the nano-scale orange peel-like morphology on osseointegration. The bone regeneration, bone-implant contact interface, and biomechanical push-out force of the modified Ti implant have been discussed thoroughly in this work. The greatly improved push-out force for the MAO coated Ti implants with micro-scale gouges could be attributed to the excellent mechanical interlocking effect between implants and biologically meshed bone tissues. Attributed to the -OH functional group which promotes synostosis between the biologically meshed bone and the gouge surface of implant, the multi-step MAO process could be an effective strategy to improve the osseointegration of Ti implant. Copyright © 2017 Elsevier B.V. All rights reserved.

Efficient One-Step Electrolytic Recycling of Low-Grade and Post-Consumer Magnesium Scrap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adam C. Powell, IV

2012-07-19

Metal Oxygen Separation Technologies, Inc. (abbreviated MOxST, pronounced most) and Boston University (BU) have developed a new low-cost process for recycling post-consumer co-mingled and heavily-oxidized magnesium scrap, and discovered a new chemical mechanism for magnesium separations in the process. The new process, designated MagReGenTM, is very effective in laboratory experiments, and on scale-up promises to be the lowest-cost lowest-energy lowest-impact method for separating magnesium metal from aluminum while recovering oxidized magnesium. MagReGenTM uses as little as one-eighth as much energy as today's methods for recycling magnesium metal from comingled scrap. As such, this technology could play a vital role inmore » recycling automotive non-ferrous metals, particularly as motor vehicle magnesium/aluminum ratios increase in order to reduce vehicle weight and increase efficiency.« less

Eddy covariance carbonyl sulfide flux measurements with a quantum cascade laser absorption spectrometer

NASA Astrophysics Data System (ADS)

Gerdel, Katharina; Spielmann, Felix M.; Hammerle, Albin; Wohlfahrt, Georg

2016-04-01

Carbonyl sulfide (COS) is the most abundant sulfur containing trace gas present in the troposphere at concentrations of around 500 ppt. Recent interest in COS by the ecosystem-physiological community has been sparked by the fact that COS co-diffuses into plant leaves pretty much the same way as carbon dioxide (CO2) does, but in contrast to CO2, COS is not known to be emitted by plants. Thus uptake of COS by vegetation has the potential to be used as a tracer for canopy gross photosynthesis, which cannot be measured directly, however represents a key term in the global carbon cycle. Since a few years, quantum cascade laser absorption spectrometers (QCLAS) are commercially available with the precision, sensitivity and time response suitable for eddy covariance (EC) flux measurements. While there exist a handful of published reports on EC flux measurements in the recent literature, no rigorous investigation of the applicability of QCLAS for EC COS flux measurements has been carried out so far, nor have been EC processing and QA/QC steps developed for carbon dioxide and water vapor flux measurements within FLUXNET been assessed for COS. The aim of this study is to close this knowledge gap, to discuss critical steps in the post-processing chain of COS EC flux measurements and to devise best-practice guidelines for COS EC flux data processing. To this end we collected EC COS (and CO2, H2O and CO) flux measurements above a temperate mountain grassland in Austria over the vegetation period 2015 with a commercially available QCLAS. We discuss various aspects of EC data post-processing, in particular issues with the time-lag estimation between sonic anemometer and QCLAS signals and QCLAS time series detrending, as well as QA/QC, in particular flux detection limits, random flux uncertainty, the interaction of various processing steps with common EC QA/QC filters (e.g. detrending and stationarity tests), u*-filtering, etc.

Advancing the application of systems thinking in health: sustainability evaluation as learning and sense-making in a complex urban health system in Northern Bangladesh.

PubMed

Sarriot, Eric G; Kouletio, Michelle; Jahan, Dr Shamim; Rasul, Izaz; Musha, Akm

2014-08-26

Starting in 1999, Concern Worldwide Inc. (Concern) worked with two Bangladeshi municipal health departments to support delivery of maternal and child health preventive services. A mid-term evaluation identified sustainability challenges. Concern relied on systems thinking implicitly to re-prioritize sustainability, but stakeholders also required a method, an explicit set of processes, to guide their decisions and choices during and after the project. Concern chose the Sustainability Framework method to generate creative thinking from stakeholders, create a common vision, and monitor progress. The Framework is based on participatory and iterative steps: defining (mapping) the local system and articulating a long-term vision, describing scenarios for achieving the vision, defining the elements of the model, and selecting corresponding indicators, setting and executing an assessment plan,, and repeated stakeholder engagement in analysis and decisions . Formal assessments took place up to 5 years post-project (2009). Strategic choices for the project were guided by articulating a collective vision for sustainable health, mapping the system of actors required to effect and sustain change, and defining different components of analysis. Municipal authorities oriented health teams toward equity-oriented service delivery efforts, strengthening of the functionality of Ward Health Committees, resource leveraging between municipalities and the Ministry of Health, and mitigation of contextual risks. Regular reference to a vision (and set of metrics (population health, organizational and community capacity) mitigated political factors. Key structures and processes were maintained following elections and political changes. Post-project achievements included the maintenance or improvement 5 years post-project (2009) in 9 of the 11 health indicator gains realized during the project (1999-2004). Some elements of performance and capacity weakened, but reductions in the equity gap achieved during the project were largely maintained post-project. Sustainability is dynamic and results from local systems processes, which can be strengthened through both implicit and explicit systems thinking steps applied with constancy of purpose.

A Thematic Analysis of Online Discussion Boards for Brachial Plexus Injury.

PubMed

Morris, Marie T; Daluiski, Aaron; Dy, Christopher J

2016-08-01

Patients with brachial plexus injury (BPI) and their family members contribute to Internet discussion groups dedicated to BPI. We hypothesized that a thematic analysis of posts from BPI Internet discussion groups would reveal common themes related to the BPI patient experience, providing topics for patient education and counseling. Internet discussion boards were identified using the search term "brachial plexus injury support group" in Google, Bing, and Yahoo! search engines. Two discussion boards had substantially more posts than other Web sites and were chosen for analyses. Posts from January 1, 2015, through January 1, 2016, were examined. Using an iterative and established process, 2 investigators (M.T.M. and C.J.D) independently analyzed each post using thematic analysis in 3 steps (open coding, axial coding, and selective coding) to determine common themes. In this process, each post was reviewed 3 times. A total of 328 posts from the 2 leading discussion boards were analyzed. Investigators reached a consensus on themes for all posts. One central theme focused on emotional aspects of BPI. Four other central themes regarding information support were identified: BPI disease, BPI treatment, recovery after BPI treatment, and process of seeking care for BPI. Examination of posts on Internet support groups for BPI revealed recurring concerns, questions, and opinions of patients and their family members. The most common themes related to disease information, treatment, recovery, and the emotional element of BPI. These findings provide a helpful starting point in refining topics for patient education and support that are targeted on patients' interests and concerns. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

A Thematic Analysis of Online Discussion Boards for Vasectomy.

PubMed

Samplaski, Mary K

2018-01-01

To examine posts on Internet discussion groups related to vasectomies, and identify common ideas through a structured theme analysis. Internet discussion boards were identified using the search term "vasectomy." Three discussion boards were identified as having the most posts and were chosen for analysis. Using an iterative and structured analysis process, each post was analyzed using thematic analysis in 3 steps (open coding, axial coding, and selective coding) to determine common themes. A total of 129 posts were analyzed. The most common posts related to changes in sexual function after vasectomy. The second most common theme was pain after vasectomy. There were also posts about considerations before vasectomy, planning for postvasectomy care, what to expect after vasectomy, potential issues after vasectomy and how to manage these, and feelings about vasectomy. Some of the information present did not have a factual basis. Posts dedicated to postvasectomy pain and sexual dysfunction were of the highest quantity. There was no medical provider input to these discussion boards. Educational efforts should be targeted to these areas and should include a health-care professional. Copyright © 2017 Elsevier Inc. All rights reserved.

Improving global CD uniformity by optimizing post-exposure bake and develop sequences

NASA Astrophysics Data System (ADS)

Osborne, Stephen P.; Mueller, Mark; Lem, Homer; Reyland, David; Baik, KiHo

2003-12-01

Improvements in the final uniformity of masks can be shrouded by error contributions from many sources. The final Global CD Uniformity (GCDU) of a mask is degraded by individual contributions of the writing tool, the Post Applied Bake (PAB), the Post Exposure Bake (PEB), the Develop sequence and the Etch step. Final global uniformity will improve by isolating and minimizing the variability of the PEB and Develop. We achieved this de-coupling of the PEB and Develop process from the whole process stream by using "dark loss" which is the loss of unexposed resist during the develop process. We confirmed a correspondence between Angstroms of dark loss and nanometer sized deviations in the chrome CD. A plate with a distinctive dark loss pattern was related to a nearly identical pattern in the chrome CD. This pattern was verified to have originated during the PEB process and displayed a [Δ(Final CD)/Δ(Dark Loss)] ratio of 6 for TOK REAP200 resist. Previous papers have reported a sensitive linkage between Angstroms of dark loss and nanometers in the final uniformity of the written plate. These initial studies reported using this method to improve the PAB of resists for greater uniformity of sensitivity and contrast. Similarly, this paper demonstrates an outstanding optimization of PEB and Develop processes.

Direct observation of the myosin Va recovery stroke that contributes to unidirectional stepping along actin.

PubMed

Shiroguchi, Katsuyuki; Chin, Harvey F; Hannemann, Diane E; Muneyuki, Eiro; De La Cruz, Enrique M; Kinosita, Kazuhiko

2011-04-01

Myosins are ATP-driven linear molecular motors that work as cellular force generators, transporters, and force sensors. These functions are driven by large-scale nucleotide-dependent conformational changes, termed "strokes"; the "power stroke" is the force-generating swinging of the myosin light chain-binding "neck" domain relative to the motor domain "head" while bound to actin; the "recovery stroke" is the necessary initial motion that primes, or "cocks," myosin while detached from actin. Myosin Va is a processive dimer that steps unidirectionally along actin following a "hand over hand" mechanism in which the trailing head detaches and steps forward ∼72 nm. Despite large rotational Brownian motion of the detached head about a free joint adjoining the two necks, unidirectional stepping is achieved, in part by the power stroke of the attached head that moves the joint forward. However, the power stroke alone cannot fully account for preferential forward site binding since the orientation and angle stability of the detached head, which is determined by the properties of the recovery stroke, dictate actin binding site accessibility. Here, we directly observe the recovery stroke dynamics and fluctuations of myosin Va using a novel, transient caged ATP-controlling system that maintains constant ATP levels through stepwise UV-pulse sequences of varying intensity. We immobilized the neck of monomeric myosin Va on a surface and observed real time motions of bead(s) attached site-specifically to the head. ATP induces a transient swing of the neck to the post-recovery stroke conformation, where it remains for ∼40 s, until ATP hydrolysis products are released. Angle distributions indicate that the post-recovery stroke conformation is stabilized by ≥ 5 k(B)T of energy. The high kinetic and energetic stability of the post-recovery stroke conformation favors preferential binding of the detached head to a forward site 72 nm away. Thus, the recovery stroke contributes to unidirectional stepping of myosin Va.

Impaired Response Selection During Stepping Predicts Falls in Older People-A Cohort Study.

PubMed

Schoene, Daniel; Delbaere, Kim; Lord, Stephen R

2017-08-01

Response inhibition, an important executive function, has been identified as a risk factor for falls in older people. This study investigated whether step tests that include different levels of response inhibition differ in their ability to predict falls and whether such associations are mediated by measures of attention, speed, and/or balance. A cohort study with a 12-month follow-up was conducted in community-dwelling older people without major cognitive and mobility impairments. Participants underwent 3 step tests: (1) choice stepping reaction time (CSRT) requiring rapid decision making and step initiation; (2) inhibitory choice stepping reaction time (iCSRT) requiring additional response inhibition and response-selection (go/no-go); and (3) a Stroop Stepping Test (SST) under congruent and incongruent conditions requiring conflict resolution. Participants also completed tests of processing speed, balance, and attention as potential mediators. Ninety-three of the 212 participants (44%) fell in the follow-up period. Of the step tests, only components of the iCSRT task predicted falls in this time with the relative risk per standard deviation for the reaction time (iCSRT-RT) = 1.23 (95%CI = 1.10-1.37). Multiple mediation analysis indicated that the iCSRT-RT was independently associated with falls and not mediated through slow processing speed, poor balance, or inattention. Combined stepping and response inhibition as measured in a go/no-go test stepping paradigm predicted falls in older people. This suggests that integrity of the response-selection component of a voluntary stepping response is crucial for minimizing fall risk. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Solar energy in food processing-a critical appraisal.

PubMed

Eswara, Amruta R; Ramakrishnarao, M

2013-04-01

Increasing population and high cost of fuels have created opportunities for using alternate energies for post-harvest processing of foods. Solar food processing is an emerging technology that provides good quality foods at low or no additional fuel costs. A number of solar dryers, collectors and concentrators are currently being used for various steps in food processing and value addition. Society for Energy, Environment and Development (SEED) developed Solar Cabinet Dryer with forced circulation which has been used for dehydration and development of value added products from locally grown fruits, vegetables, leafy greens and forest produce. Drying under simulated shade conditions using UV-reducing Blue filter helps retain nutrients better. Its simple design and ease of handling makes SEED Solar Dryer an ideal choice for application of food processing in rural settings, closer to where the harvest is produced, eliminating the need for expensive transportation or storage of fresh produce. It also creates employment opportunities among the rural population, especially women. Other gadgets based on solar collectors and concentrators currently being used at various steps of food processing are reviewed.

Photoresist removal using gaseous sulfur trioxide cleaning technology

NASA Astrophysics Data System (ADS)

Del Puppo, Helene; Bocian, Paul B.; Waleh, Ahmad

1999-06-01

A novel cleaning method for removing photoresists and organic polymers from semiconductor wafers is described. This non-plasma method uses anhydrous sulfur trioxide gas in a two-step process, during which, the substrate is first exposed to SO3 vapor at relatively low temperatures and then is rinsed with de-ionized water. The process is radically different from conventional plasma-ashing methods in that the photoresist is not etched or removed during the exposure to SO3. Rather, the removal of the modified photoresist takes place during the subsequent DI-water rinse step. The SO3 process completely removes photoresist and polymer residues in many post-etch applications. Additional advantages of the process are absence of halogen gases and elimination of the need for other solvents and wet chemicals. The process also enjoys a very low cost of ownership and has minimal environmental impact. The SEM and SIMS surface analysis results are presented to show the effectiveness of gaseous SO3 process after polysilicon, metal an oxide etch applications. The effects of both chlorine- and fluorine-based plasma chemistries on resist removal are described.

Processing of laser formed SiC powder

NASA Technical Reports Server (NTRS)

Haggerty, J. S.; Bowen, H. K.

1987-01-01

Processing research was undertaken to demonstrate that superior SiC characteristics could be achieved through the use of ideal constituent powders and careful post-synthesis processing steps. Initial research developed the means to produce approximately 1000 A uniform diameter, nonagglomerated, spherical, high purity SiC powders. Accomplishing this goal required major revision of the particle formation and growth model from one based on classical nucleation and growth to one based on collision and coalescence of Si particles followed by their carburization. Dispersions based on pure organic solvents as well as steric stabilization were investigated. Test parts were made by the colloidal pressing technique; both liquid filtration and consolidation (rearrangement) stages were modeled. Green densities corresponding to a random close packed structure were achieved. After drying, parts were densified at temperatures ranging from 1800 to 2100 C. This research program accomplished all of its major objectives. Superior microstructures and properties were attained by using powders having ideal characteristics and special post-synthesis processing procedures.

Characterization of nonplanar motion in MEMS involving scanning laser interferometry

NASA Astrophysics Data System (ADS)

Lawton, Russell A.; Abraham, Margaret H.; Lawrence, Eric

1999-08-01

A study to evaluate three processes used for the release of standard devices produced by MCNC using the MUMPS process was undertaken by Jet Propulsion Laboratory with the collaboration of The Aerospace Corporation, and Polytec PI. The processes used were developed at various laboratories and are commonly the final step in the production of micro- electro-mechanical systems prior to packaging. It is at this stage of the process when the devices become extremely delicate and are subject to yield losses due to handling errors or the phenomenon of stiction. The effects of post processing with HF on gain boundaries and subsequent thermal processing producing native oxide growth during packaging will require further investigation.

Probabilistic soil erosion modeling using the Erosion Risk Management Tool (ERMIT) after wildfires

Treesearch

P. R. Robichaud; W. J. Elliot; J. W. Wagenbrenner

2011-01-01

The decision of whether or not to apply post-fire hillslope erosion mitigation treatments, and if so, where these treatments are most needed, is a multi-step process. Land managers must assess the risk of damaging runoff and sediment delivery events occurring on the unrecovered burned hillslope. We developed the Erosion Risk Management Tool (ERMiT) to address this need...

Development and testing of a wet oxidation waste processing system. [for waste treatment aboard manned spacecraft

NASA Technical Reports Server (NTRS)

Weitzmann, A. L.

1977-01-01

The wet oxidation process is considered as a potential treatment method for wastes aboard manned spacecraft for these reasons: (1) Fecal and urine wastes are processed to sterile water and CO2 gas. However, the water requires post-treatment to remove salts and odor; (2) the residual ash is negligible in quantity, sterile and easily collected; and (3) the product CO2 gas can be processed through a reduction step to aid in material balance if needed. Reaction of waste materials with oxygen at elevated temperature and pressure also produces some nitrous oxide, as well as trace amounts of a few other gases.

Micromechanical Characterization and Texture Analysis of Direct Cast Titanium Alloys Strips

NASA Technical Reports Server (NTRS)

2000-01-01

This research was conducted to determine a post-processing technique to optimize mechanical and material properties of a number of Titanium based alloys and aluminides processed via Melt Overflow Solidification Technique (MORST). This technique was developed by NASA for the development of thin sheet titanium and titanium aluminides used in high temperature applications. The materials investigated in this study included conventional titanium alloy strips and foils, Ti-1100, Ti-24Al-11Nb (Alpha-2), and Ti-48Al-2Ta (Gamma). The methodology used included micro-characterization, heat-treatment, mechanical processing and mechanical testing. Characterization techniques included optical, electron microscopy, and x-ray texture analysis. The processing included heat-treatment and mechanical deformation through cold rolling. The initial as-cast materials were evaluated for their microstructure and mechanical properties. Different heat-treatment and rolling steps were chosen to process these materials. The properties were evaluated further and a processing relationship was established in order to obtain an optimum processing condition. The results showed that the as-cast material exhibited a Widmanstatten (fine grain) microstructure that developed into a microstructure with larger grains through processing steps. The texture intensity showed little change for all processing performed in this investigation.

Circadian processes in the RNA life cycle.

PubMed

Torres, Manon; Becquet, Denis; Franc, Jean-Louis; François-Bellan, Anne-Marie

2018-05-01

The circadian clock drives daily rhythms of multiple physiological processes, allowing organisms to anticipate and adjust to periodic changes in environmental conditions. These physiological rhythms are associated with robust oscillations in the expression of at least 30% of expressed genes. While the ability for the endogenous timekeeping system to generate a 24-hr cycle is a cell-autonomous mechanism based on negative autoregulatory feedback loops of transcription and translation involving core-clock genes and their protein products, it is now increasingly evident that additional mechanisms also govern the circadian oscillations of clock-controlled genes. Such mechanisms can take place post-transcriptionally during the course of the RNA life cycle. It has been shown that many steps during RNA processing are regulated in a circadian manner, thus contributing to circadian gene expression. These steps include mRNA capping, alternative splicing, changes in splicing efficiency, and changes in RNA stability controlled by the tail length of polyadenylation or the use of alternative polyadenylation sites. RNA transport can also follow a circadian pattern, with a circadian nuclear retention driven by rhythmic expression within the nucleus of particular bodies (the paraspeckles) and circadian export to the cytoplasm driven by rhythmic proteins acting like cargo. Finally, RNA degradation may also follow a circadian pattern through the rhythmic involvement of miRNAs. In this review, we summarize the current knowledge of the post-transcriptional circadian mechanisms known to play a prominent role in shaping circadian gene expression in mammals. This article is categorized under: RNA Processing > Splicing Regulation/Alternative Splicing RNA Processing > RNA Editing and Modification RNA Export and Localization > Nuclear Export/Import. © 2018 Wiley Periodicals, Inc.

Light-induced cross-linking and post-cross-linking modification of polyglycidol.

PubMed

Marquardt, F; Bruns, M; Keul, H; Yagci, Y; Möller, M

2018-02-08

The photoinduced radical generation process has received renewed interest due to its economic and ecological appeal. Herein the light-induced cross-linking of functional polyglycidol and its post-cross-linking modification are presented. Linear polyglycidol was first functionalized with a tertiary amine in a two-step reaction. Dimethylaminopropyl functional polyglycidol was cross-linked in a UV-light mediated reaction with camphorquinone as a type II photoinitiator. The cross-linked polyglycidol was further functionalized by quaternization with various organoiodine compounds. Aqueous dispersions of the cross-linked polymers were investigated by means of DLS and zeta potential measurements. Polymer films were evaluated by DSC and XPS.

A novel methodology for litho-to-etch pattern fidelity correction for SADP process

NASA Astrophysics Data System (ADS)

Chen, Shr-Jia; Chang, Yu-Cheng; Lin, Arthur; Chang, Yi-Shiang; Lin, Chia-Chi; Lai, Jun-Cheng

2017-03-01

For 2x nm node semiconductor devices and beyond, more aggressive resolution enhancement techniques (RETs) such as source-mask co-optimization (SMO), litho-etch-litho-etch (LELE) and self-aligned double patterning (SADP) are utilized for the low k1 factor lithography processes. In the SADP process, the pattern fidelity is extremely critical since a slight photoresist (PR) top-loss or profile roughness may impact the later core trim process, due to its sensitivity to environment. During the subsequent sidewall formation and core removal processes, the core trim profile weakness may worsen and induces serious defects that affect the final electrical performance. To predict PR top-loss, a rigorous lithography simulation can provide a reference to modify mask layouts; but it takes a much longer run time and is not capable of full-field mask data preparation. In this paper, we first brought out an algorithm which utilizes multi-intensity levels from conventional aerial image simulation to assess the physical profile through lithography to core trim etching steps. Subsequently, a novel correction method was utilized to improve the post-etch pattern fidelity without the litho. process window suffering. The results not only matched PR top-loss in rigorous lithography simulation, but also agreed with post-etch wafer data. Furthermore, this methodology can also be incorporated with OPC and post-OPC verification to improve core trim profile and final pattern fidelity at an early stage.

[Virtual endoscopic navigation and body transparency based on computed tomography. A step towards in vivo imaging].

PubMed

Cabanis, Emmanuel-Alain; Gombergh, Rodolphe; Castro, Albert; Gandjbakhch, Iradj; Iba-Zizen, Marie-Thérèse; Dubois, François

2011-06-01

Progress in HR-CTdata processing has led to lower X-ray exposure and to better diagnostic performance. We describe 19 adult patients (among 5000) examined by HR CT with 64 detectors, acquisition and exposure protocols in mSv, spiral, 0.6-mm slices, 5To PACS. After the two usual processing steps (60 gray values, 5122 and 10242 matrices, dedicated workstations for coronaroscopy and virtual coloscopy, 2D multiplanar reformation, surfacic, 3D volumes with dissection and navigation), a third original data processing step on additional workstations was added. Variable matrix extrapolated images, flexible colored curves (different from anatomical conventions), lighting (sources) and transparencies (unavailable with traditional endoscopy) were used. The digital film is a 16-minute "journey "consisting of 19 endo-body navigations in 5 regions, from the head to the bronchi, from the heart to the coronary arteries, and from the digestive tract to the abdomen and pelvis. One possible application is post-operative verification of an aortic graft. The movie is illustrated here with ten plates. This new approach is cost-effective and beneficial for the patient, in terms of early diagnosis and therapeutic follow-up. Ethical issues are also examined.

Second-Order Biomimicry: In Situ Oxidative Self-Processing Converts Copper(I)/Diamine Precursor into a Highly Active Aerobic Oxidation Catalyst

PubMed Central

2017-01-01

A homogeneous Cu-based catalyst system consisting of [Cu(MeCN)4]PF6, N,N′-di-tert-butylethylenediamine (DBED), and p-(N,N-dimethylamino)pyridine (DMAP) mediates efficient aerobic oxidation of alcohols. Mechanistic study of this reaction shows that the catalyst undergoes an in situ oxidative self-processing step, resulting in conversion of DBED into a nitroxyl that serves as an efficient cocatalyst for aerobic alcohol oxidation. Insights into this behavior are gained from kinetic studies, which reveal an induction period at the beginning of the reaction that correlates with the oxidative self-processing step, EPR spectroscopic analysis of the catalytic reaction mixture, which shows the buildup of the organic nitroxyl species during steady state turnover, and independent synthesis of oxygenated DBED derivatives, which are shown to serve as effective cocatalysts and eliminate the induction period in the reaction. The overall mechanism bears considerable resemblance to enzymatic reactivity. Most notable is the “oxygenase”-type self-processing step that mirrors generation of catalytic cofactors in enzymes via post-translational modification of amino acid side chains. This higher-order function within a synthetic catalyst system presents new opportunities for the discovery and development of biomimetic catalysts. PMID:28470049

Fast automatic delineation of cardiac volume of interest in MSCT images

NASA Astrophysics Data System (ADS)

Lorenz, Cristian; Lessick, Jonathan; Lavi, Guy; Bulow, Thomas; Renisch, Steffen

2004-05-01

Computed Tomography Angiography (CTA) is an emerging modality for assessing cardiac anatomy. The delineation of the cardiac volume of interest (VOI) is a pre-processing step for subsequent visualization or image processing. It serves the suppression of anatomic structures being not in the primary focus of the cardiac application, such as sternum, ribs, spinal column, descending aorta and pulmonary vasculature. These structures obliterate standard visualizations such as direct volume renderings or maximum intensity projections. In addition, outcome and performance of post-processing steps such as ventricle suppression, coronary artery segmentation or the detection of short and long axes of the heart can be improved. The structures being part of the cardiac VOI (coronary arteries and veins, myocardium, ventricles and atria) differ tremendously in appearance. In addition, there is no clear image feature associated with the contour (or better cut-surface) distinguishing between cardiac VOI and surrounding tissue making the automatic delineation of the cardiac VOI a difficult task. The presented approach locates in a first step chest wall and descending aorta in all image slices giving a rough estimate of the location of the heart. In a second step, a Fourier based active contour approach delineates slice-wise the border of the cardiac VOI. The algorithm has been evaluated on 41 multi-slice CT data-sets including cases with coronary stents and venous and arterial bypasses. The typical processing time amounts to 5-10s on a 1GHz P3 PC.

A structured analysis of in vitro failure loads and failure modes of fiber, metal, and ceramic post-and-core systems.

PubMed

Fokkinga, Wietske A; Kreulen, Cees M; Vallittu, Pekka K; Creugers, Nico H J

2004-01-01

This study sought to aggregate literature data on in vitro failure loads and failure modes of prefabricated fiber-reinforced composite (FRC) post systems and to compare them to those of prefabricated metal, custom-cast, and ceramic post systems. The literature was searched using MEDLINE from 1984 to 2003 for dental articles in English. Keywords used were (post or core or buildup or dowel) and (teeth or tooth). Additional inclusion/exclusion steps were conducted, each step by two independent readers: (1) Abstracts describing post-and-core techniques to reconstruct endodontically treated teeth and their mechanical and physical characteristics were included (descriptive studies or reviews were excluded); (2) articles that included FRC post systems were selected; (3) in vitro studies, single-rooted human teeth, prefabricated FRC posts, and composite as the core material were the selection criteria; and (4) failure loads and modes were extracted from the selected papers, and failure modes were dichotomized (distinction was made between "favorable failures," defined as reparable failures, and "unfavorable failures,"defined as irreparable [root] fractures). The literature search revealed 1,984 abstracts. Included were 244, 42, and 12 articles in the first, second, and third selection steps, respectively. Custom-cast post systems showed higher failure loads than prefabricated FRC post systems, whereas ceramic showed lower failure loads. Significantly more favorable failures occurred with prefabricated FRC post systems than with prefabricated and custom-cast metal post systems. The variable "post system" had a significant effect on mean failure loads. FRC post systems more frequently showed favorable failure modes than did metal post systems.

Study on process and characterization of high-temperature resistance polyimide composite

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pan, Ling-Ying; Zhao, Wei-Dong; Liu, Han-Yang

2016-05-18

A novel polyimide composite with upper-use temperature of 420°C was prepared by autoclave process. The thermogravimetic analysis and rheological properties of uncured polyimide resin powders were analyzed. The influences of process parameters and post-treatment process on the properties of composites were also investigated. The morphologies of polyimide composites after shear fracture were observed by scanning electron microscope (SEM). The high-temperature resistance of composite was characterized by dynamic mechanical thermal analyzer (DMTA). Results showed that the imidization reaction mainly occurred in the temperature range of 100°C~220°C, and the largest weight loss rate appearing at 145°C indicated a drastic imidization reaction occurred.more » The melt viscosity of polyimide resin decreased with increasing the temperature between 220°C ∼305°C, and then increased with the increase of temperature due to the molecular crosslinking reactions. The fiber volume contents and void contents could be effectively controlled by applying the pressure step by step. The fiber volume content was sensitive to the initial pressure (P{sub i}) during the imidization. The second-stage pressure (P{sub 2}) and the temperature for applying the P{sub 2} (T{sub 2}) during the imidization had a great effect on the void content of composite. Good mechanical properties and interfacial adhesion of polyimide composite could obtain by optimized process. The post-treatment process can obviously increase the high-temperature resistance of polyimide composite. The polyimide composite treated at 420°C exhibited good retention of mechanical properties at 420°C and had a glass transition temperature (Tg) of 456°C. The retentions of flexible strength, flexible modulus and short beam shear strength of polyimide composite at 420°C were 65%, 84% and 62% respectively.« less

Self-cleaning poly(dimethylsiloxane) film with functional micro/nano hierarchical structures.

PubMed

Zhang, Xiao-Sheng; Zhu, Fu-Yun; Han, Meng-Di; Sun, Xu-Ming; Peng, Xu-Hua; Zhang, Hai-Xia

2013-08-27

This paper reports a novel single-step wafer-level fabrication of superhydrophobic micro/nano dual-scale (MNDS) poly(dimethylsiloxane) (PDMS) films. The MNDS PDMS films were replicated directly from an ultralow-surface-energy silicon substrate at high temperature without any surfactant coating, achieving high precision. An improved deep reactive ion etching (DRIE) process with enhanced passivation steps was proposed to easily realize the ultralow-surface-energy MNDS silicon substrate and also utilized as a post-treatment process to strengthen the hydrophobicity of the MNDS PDMS film. The chemical modification of this enhanced passivation step to the surface energy has been studied by density functional theory, which is also the first investigation of C4F8 plasma treatment at molecular level by using first-principle calculations. From the results of a systematic study on the effect of key process parameters (i.e., baking temperature and time) on PDMS replication, insight into the interaction of hierarchical multiscale structures of polymeric materials during the micro/nano integrated fabrication process is experimentally obtained for the first time. Finite element simulation has been employed to illustrate this new phenomenon. Additionally, hierarchical PDMS pyramid arrays and V-shaped grooves have been developed and are intended for applications as functional structures for a light-absorption coating layer and directional transport of liquid droplets, respectively. This stable, self-cleaning PDMS film with functional micro/nano hierarchical structures, which is fabricated through a wafer-level single-step fabrication process using a reusable silicon mold, shows attractive potential for future applications in micro/nanodevices, especially in micro/nanofluidics.

A fast automatic target detection method for detecting ships in infrared scenes

NASA Astrophysics Data System (ADS)

Özertem, Kemal Arda

2016-05-01

Automatic target detection in infrared scenes is a vital task for many application areas like defense, security and border surveillance. For anti-ship missiles, having a fast and robust ship detection algorithm is crucial for overall system performance. In this paper, a straight-forward yet effective ship detection method for infrared scenes is introduced. First, morphological grayscale reconstruction is applied to the input image, followed by an automatic thresholding onto the suppressed image. For the segmentation step, connected component analysis is employed to obtain target candidate regions. At this point, it can be realized that the detection is defenseless to outliers like small objects with relatively high intensity values or the clouds. To deal with this drawback, a post-processing stage is introduced. For the post-processing stage, two different methods are used. First, noisy detection results are rejected with respect to target size. Second, the waterline is detected by using Hough transform and the detection results that are located above the waterline with a small margin are rejected. After post-processing stage, there are still undesired holes remaining, which cause to detect one object as multi objects or not to detect an object as a whole. To improve the detection performance, another automatic thresholding is implemented only to target candidate regions. Finally, two detection results are fused and post-processing stage is repeated to obtain final detection result. The performance of overall methodology is tested with real world infrared test data.

Retrovirus Integration: Some Assembly Required?

PubMed

Ali, Ibraheem; Conrad, Ryan J; Ott, Melanie

2016-12-14

Integration is a key feature of the retroviral life cycle. This process involves packaging of the viral genome into chromatin, which is often assumed to occur as a post-integration step. In this issue of Cell Host & Microbe, Wang and colleagues (Wang et al., 2016) show that chromatinization occurs before integration, raising new questions about the role of histones in retroviral integration and transcription. Copyright © 2016. Published by Elsevier Inc.

Building a successful support group for post-amputation patients.

PubMed

Marzen-Groller, Karen; Bartman, Kimberly

2005-06-01

The purpose of this article is to identify five steps to attain a successful amputee support group and share the process for establishing and maintaining a peer visitation program for in-patient amputees. Whatever the cause, losing a limb is a life-changing event that one should not go through alone. Support groups can assist patients and their families through this transition in a positive and healthy way.

Defense Analysis: The Decision Process

DTIC Science & Technology

1985-07-01

problems ot resource allocation. Includes chapters on tormulating the problem, the research ettort, evaluation ot alternatives, interpretations of...Economics and Decision Making. He is a graduate of Colgate University (BA, Psychology) and received his Masters degree at the Naval Post Graduate School...Analysis 62 ’, ’The Steps irn Subject iye Aiuslysis 66 " Identify the Factors 66 Discusss the Factors 67 Evaluate Each Factor 67 Summa r y 68 Chapter VII

Multi-Frame Convolutional Neural Networks for Object Detection in Temporal Data

DTIC Science & Technology

2017-03-01

maximum 200 words) Given the problem of detecting objects in video , existing neural-network solutions rely on a post-processing step to combine...information across frames and strengthen conclusions. This technique has been successful for videos with simple, dominant objects but it cannot detect objects...Computer Science iii THIS PAGE INTENTIONALLY LEFT BLANK iv ABSTRACT Given the problem of detecting objects in video , existing neural-network solutions rely

Raman spectral post-processing for oral tissue discrimination – a step for an automatized diagnostic system

PubMed Central

Carvalho, Luis Felipe C. S.; Nogueira, Marcelo Saito; Neto, Lázaro P. M.; Bhattacharjee, Tanmoy T.; Martin, Airton A.

2017-01-01

Most oral injuries are diagnosed by histopathological analysis of a biopsy, which is an invasive procedure and does not give immediate results. On the other hand, Raman spectroscopy is a real time and minimally invasive analytical tool with potential for the diagnosis of diseases. The potential for diagnostics can be improved by data post-processing. Hence, this study aims to evaluate the performance of preprocessing steps and multivariate analysis methods for the classification of normal tissues and pathological oral lesion spectra. A total of 80 spectra acquired from normal and abnormal tissues using optical fiber Raman-based spectroscopy (OFRS) were subjected to PCA preprocessing in the z-scored data set, and the KNN (K-nearest neighbors), J48 (unpruned C4.5 decision tree), RBF (radial basis function), RF (random forest), and MLP (multilayer perceptron) classifiers at WEKA software (Waikato environment for knowledge analysis), after area normalization or maximum intensity normalization. Our results suggest the best classification was achieved by using maximum intensity normalization followed by MLP. Based on these results, software for automated analysis can be generated and validated using larger data sets. This would aid quick comprehension of spectroscopic data and easy diagnosis by medical practitioners in clinical settings. PMID:29188115

Raman spectral post-processing for oral tissue discrimination - a step for an automatized diagnostic system.

PubMed

Carvalho, Luis Felipe C S; Nogueira, Marcelo Saito; Neto, Lázaro P M; Bhattacharjee, Tanmoy T; Martin, Airton A

2017-11-01

Most oral injuries are diagnosed by histopathological analysis of a biopsy, which is an invasive procedure and does not give immediate results. On the other hand, Raman spectroscopy is a real time and minimally invasive analytical tool with potential for the diagnosis of diseases. The potential for diagnostics can be improved by data post-processing. Hence, this study aims to evaluate the performance of preprocessing steps and multivariate analysis methods for the classification of normal tissues and pathological oral lesion spectra. A total of 80 spectra acquired from normal and abnormal tissues using optical fiber Raman-based spectroscopy (OFRS) were subjected to PCA preprocessing in the z-scored data set, and the KNN (K-nearest neighbors), J48 (unpruned C4.5 decision tree), RBF (radial basis function), RF (random forest), and MLP (multilayer perceptron) classifiers at WEKA software (Waikato environment for knowledge analysis), after area normalization or maximum intensity normalization. Our results suggest the best classification was achieved by using maximum intensity normalization followed by MLP. Based on these results, software for automated analysis can be generated and validated using larger data sets. This would aid quick comprehension of spectroscopic data and easy diagnosis by medical practitioners in clinical settings.

Report of 111 Consecutive Patients Enrolled in the International Serial Transverse Enteroplasty (STEP) Data Registry: A Retrospective Observational Study

PubMed Central

Jones, Brian A; Hull, Melissa A; Potanos, Kristina M; Zurakowski, David; Fitzgibbons, Shimae C; Ching, Y Avery; Duggan, Christopher; Jaksic, Tom; Kim, Heung Bae

2016-01-01

Background The International Serial Transverse Enteroplasty (STEP) Data Registry is a voluntary online database created in 2004 to collect information on patients undergoing the STEP procedure. The aim of this study was to identify preoperative factors significantly associated with 1) transplantation or death, or 2) attainment of enteral autonomy following STEP. Study Design Data were collected from September 2004 to January 2010. Univariate and multivariate logistic regression analyses were applied to determine predictors of transplantation/death or enteral autonomy post-STEP. Time to reach full enteral nutrition was estimated using a Kaplan-Meier curve. Results Fourteen of the 111 patients in the Registry were excluded due to inadequate follow-up. Of the remaining 97 patients, 11 patients died, and 5 progressed to intestinal transplantation. On multivariate analysis, higher direct bilirubin and shorter pre-STEP bowel length were independently predictive of progression to transplantation or death (p = .05 and p < .001, respectively). Of the 78 patients who were ≥7 days of age and required parenteral nutrition (PN) at the time of STEP, 37 (47%) achieved enteral autonomy after the first STEP. Longer pre-STEP bowel length was also independently associated with enteral autonomy (p = .002). The median time to reach enteral autonomy based on Kaplan-Meier analysis was 21 months (95% CI: 12-30). Conclusions Overall mortality post-STEP was 11%. Pre-STEP risk factors for progressing to transplantation or death were higher direct bilirubin and shorter bowel length. Among patients who underwent STEP for short bowel syndrome, 47% attained full enteral nutrition post-STEP. Patients with longer pre-STEP bowel length were significantly more likely to achieve enteral autonomy. PMID:23357726

Comparing Acceptance and Commitment Group Therapy and 12-Steps Narcotics Anonymous in Addict's Rehabilitation Process: A Randomized Controlled Trial.

PubMed

Azkhosh, Manoochehr; Farhoudianm, Ali; Saadati, Hemn; Shoaee, Fateme; Lashani, Leila

2016-10-01

Objective: Substance abuse is a socio-psychological disorder. The aim of this study was to compare the effectiveness of acceptance and commitment therapy with 12-steps Narcotics Anonymous on psychological well-being of opiate dependent individuals in addiction treatment centers in Shiraz, Iran. Method: This was a randomized controlled trial. Data were collected at entry into the study and at post-test and follow-up visits. The participants were selected from opiate addicted individuals who referred to addiction treatment centers in Shiraz. Sixty individuals were evaluated according to inclusion/ exclusion criteria and were divided into three equal groups randomly (20 participants per group). One group received acceptance and commitment group therapy (Twelve 90-minute sessions) and the other group was provided with the 12-steps Narcotics Anonymous program and the control group received the usual methadone maintenance treatment. During the treatment process, seven participants dropped out. Data were collected using the psychological well-being questionnaire and AAQ questionnaire in the three groups at pre-test, post-test and follow-up visits. Data were analyzed using repeated measure analysis of variance. Results: Repeated measure analysis of variance revealed that the mean difference between the three groups was significant (P<0.05) and that acceptance and commitment therapy group showed improvement relative to the NA and control groups on psychological well-being and psychological flexibility. Conclusion : The results of this study revealed that acceptance and commitment therapy can be helpful in enhancing positive emotions and increasing psychological well-being of addicts who seek treatment.

Growth factors delivery from hybrid PCL-starch scaffolds processed using supercritical fluid technology.

PubMed

Diaz-Gomez, Luis; Concheiro, Angel; Alvarez-Lorenzo, Carmen; García-González, Carlos A

2016-05-20

Synthetic polymeric scaffolds to be used as surrogates of autologous bone grafts should not only have suitable physicochemical and mechanical properties, but also contain bioactive agents such as growth factors (GFs) to facilitate the tissue growth. For this purpose, cost-effective and autologous GFs sources are preferred to avoid some post-surgery complications after implantation, like immunogenicity or disease transmission, and the scaffolds should be processed using methods able to preserve GFs activity. In this work, poly(ɛ-caprolactone) (PCL) scaffolds incorporating GFs were processed using a green foaming process based on supercritical fluid technology. Preparation rich in growth factors (PRGF), a natural and highly available cocktail of GFs obtained from platelet rich plasma (PRP), was used as GF source. PCL:starch:PRGF (85:10:5 weight ratio) porous solid scaffolds were obtained by a supercritical CO2-assisted foaming process at 100 bar and 37 °C with no need of post-processing steps. Bioactivity of GFs after processing and scaffold cytocompatibility were confirmed using mesenchymal stem cells. The performance of starch as GF control release component was shown to be dependent on starch pre-gelification conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Fabrication of an optical component

DOEpatents

Nichols, Michael A.; Aikens, David M.; Camp, David W.; Thomas, Ian M.; Kiikka, Craig; Sheehan, Lynn M.; Kozlowski, Mark R.

2000-01-01

A method for forming optical parts used in laser optical systems such as high energy lasers, high average power lasers, semiconductor capital equipment and medical devices. The optical parts will not damage during the operation of high power lasers in the ultra-violet light range. A blank is first ground using a fixed abrasive grinding method to remove the subsurface damage formed during the fabrication of the blank. The next step grinds and polishes the edges and forms bevels to reduce the amount of fused-glass contaminants in the subsequent steps. A loose abrasive grind removes the subsurface damage formed during the fixed abrasive or "blanchard" removal process. After repolishing the bevels and performing an optional fluoride etch, the surface of the blank is polished using a zirconia slurry. Any subsurface damage formed during the loose abrasive grind will be removed during this zirconia polish. A post polish etch may be performed to remove any redeposited contaminants. Another method uses a ceria polishing step to remove the subsurface damage formed during the loose abrasive grind. However, any residual ceria may interfere with the optical properties of the finished part. Therefore, the ceria and other contaminants are removed by performing either a zirconia polish after the ceria polish or a post ceria polish etch.

Breast cancer mitosis detection in histopathological images with spatial feature extraction

NASA Astrophysics Data System (ADS)

Albayrak, Abdülkadir; Bilgin, Gökhan

2013-12-01

In this work, cellular mitosis detection in histopathological images has been investigated. Mitosis detection is very expensive and time consuming process. Development of digital imaging in pathology has enabled reasonable and effective solution to this problem. Segmentation of digital images provides easier analysis of cell structures in histopathological data. To differentiate normal and mitotic cells in histopathological images, feature extraction step is very crucial step for the system accuracy. A mitotic cell has more distinctive textural dissimilarities than the other normal cells. Hence, it is important to incorporate spatial information in feature extraction or in post-processing steps. As a main part of this study, Haralick texture descriptor has been proposed with different spatial window sizes in RGB and La*b* color spaces. So, spatial dependencies of normal and mitotic cellular pixels can be evaluated within different pixel neighborhoods. Extracted features are compared with various sample sizes by Support Vector Machines using k-fold cross validation method. According to the represented results, it has been shown that separation accuracy on mitotic and non-mitotic cellular pixels gets better with the increasing size of spatial window.

Compliance With WHO/UNICEF BFHI Standards in Croatia After Implementation of the BFHI.

PubMed

Zakarija-Grković, Irena; Boban, Marija; Janković, Sunčana; Ćuže, Anamarija; Burmaz, Tea

2018-02-01

The primary goal of the Baby-Friendly Hospital Initiative (BFHI) is to create conditions in maternity facilities that enable women to initiate and sustain the practice of breastfeeding exclusively. Research aim: This study aimed to determine hospital practices and breastfeeding rates before and after BFHI implementation and assess compliance with UNICEF/World Health Organization (WHO) standards for seven of the BFHI's Ten Steps to Successful Breastfeeding ( Ten Steps). Mothers of healthy, term infants ( N = 1,115) were recruited from the postnatal ward of the University Hospital of Split, Croatia, between February 2008 and July 2011 and followed for 12 months in a repeated-measures, prospective, longitudinal, three-group, nonequivalent, cohort study. Breastfeeding rates, hospital practices-including seven of the Ten Steps-and maternal sociodemographic data were collected. Parts of all seven Ten Steps that were assessed improved significantly post-BFHI. Step 3 ("antenatal education") showed the least improvement, whereas Step 7 ("rooming-in"; 2.6% pre-BFHI vs. 98.5% post-BFHI) and Step 9 ("no pacifiers/teats"; 21.8% pre-BFHI vs. 99.4% post-BFHI) showed the greatest improvement. Six months after Baby-Friendly designation, only Steps 7 and 9 were in full compliance with UNICEF/WHO standards. In-hospital, exclusive-breastfeeding rates rose markedly ( p < .001), but no change occurred in breastfeeding rates at 3, 6, or 12 months. Full implementation of the BFHI was associated with significant improvement in hospital practices and in-hospital, exclusive-breastfeeding rates, but it did not affect breastfeeding rates postdischarge, emphasizing the vital role of community support. Baby-Friendly Hospital Initiative standards declined rapidly post-hospital designation, indicating the need for regular monitoring and reassessment as well as ongoing, effective training for hospital staff.

Conducting survey research at nursing conferences.

PubMed

Sleutel, M R

2001-01-01

Conferences can provide large numbers of potential subjects in one location, yet there is little published guidance on how to collect data at a conference site. A computer search revealed no citations on this topic. This article outlines a systematic strategy to plan and perform research at conferences. This article provides a step-by-step process to guide researchers in planning and conducting survey research at conferences. Initial components in planning data collection at a conference include making a timeline and getting permission. Detailed advanced planning involves specific strategies for attracting participants, and for distributing and collecting the questionnaires. Travel provisions and on-site logistical approaches are explained, followed by suggestions for post-conference activities.

Clinically Significant Prostate Cancer Local Recurrence After Radiation Therapy Occurs at the Site of Primary Tumor: Magnetic Resonance Imaging and Step-Section Pathology Evidence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pucar, Darko; Hricak, Hedvig; Shukla-Dave, Amita

2007-09-01

Purpose: To determine whether prostate cancer local recurrence after radiation therapy (RT) occurs at the site of primary tumor by retrospectively comparing the tumor location on pre-RT and post-RT magnetic resonance imaging (MRI) and using step-section pathology after salvage radical prostatectomy (SRP) as the reference standard. Methods and Materials: Nine patients with localized prostate cancer were treated with intensity modulated RT (69-86.4 Gy), and had pre-RT and post-RT prostate MRI, biopsy-proven local recurrence, and SRP. The location and volume of lesions on pre-RT and post-RT MRI were correlated with step-section pathology findings. Tumor foci >0.2 cm{sup 3} and/or resulting inmore » extraprostatic disease on pathology were considered clinically significant. Results: All nine significant tumor foci (one in each patient; volume range, 0.22-8.63 cm{sup 3}) were detected both on pre-RT and post-RT MRI and displayed strikingly similar appearances on pre-RT and post-RT MRI and step-section pathology. Two clinically insignificant tumor foci ({<=}0.06 cm{sup 3}) were not detected on imaging. The ratios between tumor volumes on pathology and on post-RT MRI ranged from 0.52 to 2.80. Conclusions: Our study provides a direct visual confirmation that clinically significant post-RT local recurrence occurs at the site of primary tumor. Our results are in agreement with reported clinical and pathologic results and support the current practice of boosting the radiation dose within the primary tumor using imaging guidance. They also suggest that monitoring of primary tumor with pre-RT and post-RT MRI could lead to early detection of local recurrence amenable to salvage treatment.« less

Fast kinetic studies of plasmid DNA transfer in intact yeast cells mediated by electropulsation.

PubMed

Ganeva, V; Galutzov, B; Teissie, J

1995-09-25

Intact yeast cell Electrotransformation process was investigated. It is a two step process. The plasmid must be pre-mixed and present in contact with the cells during the pulse. During the millisecond field pulse, plasmid DNA is associated to the envelope. It therefore crosses the membrane by a process which lasts several seconds as shown by its sensitivity to a post pulse addition of DNase. Electrotransformation is not supported by an electrophoretic transfer due to the external field nor by a free diffusion across the electropermeabilized envelope. DNA is first bound during the field pulse and then is transferred by a still unknown active process due to cell metabolism.

Fabrication of the planar angular rotator using the CMOS process

NASA Astrophysics Data System (ADS)

Dai, Ching-Liang; Chang, Chien-Liu; Chen, Hung-Lin; Chang, Pei-Zen

2002-05-01

In this investigation we propose a novel planar angular rotator fabricated by the conventional complementary metal-oxide semiconductor (CMOS) process. Following the 0.6 μm single poly triple metal (SPTM) CMOS process, the device is completed by a simple maskless, post-process etching step. The rotor of the planar angular rotator rotates around its geometric center with electrostatic actuation. The proposed design adopts an intelligent mechanism including the slider-crank system to permit simultaneous motion. The CMOS planar angular rotator could be driven with driving voltages of around 40 V. The design proposed here has a shorter response time and longer life, without problems of friction and wear, compared to the more common planar angular micromotor.

Development of a Convergent Spray Technologies(tm) Spray Process for a Solventless Sprayable Coating, MCC-1

NASA Technical Reports Server (NTRS)

Patel, Anil K.; Meeks, C.

1998-01-01

This paper discusses the application of Convergent Spray Technologies (TM) Spray Process to the development and successful implementation of Marshall Convergent Coating (MCC-1) as a primary Thermal Protection System (TPS) for the Space Shuttle Solid Rocket Boosters (SRBs). This paper discusses the environmental and process benefits of the MCC-1 technology, shows the systematic steps taken in developing the technology, including statistical sensitivity studies of about 35 variables. Based on the process and post-flight successes on the SRB, it will be seen that the technology is "field-proven". Application of this technology to other aerospace and commercial programs is summarized to illustrate the wide range of possibilities.

Object Segmentation and Ground Truth in 3D Embryonic Imaging.

PubMed

Rajasekaran, Bhavna; Uriu, Koichiro; Valentin, Guillaume; Tinevez, Jean-Yves; Oates, Andrew C

2016-01-01

Many questions in developmental biology depend on measuring the position and movement of individual cells within developing embryos. Yet, tools that provide this data are often challenged by high cell density and their accuracy is difficult to measure. Here, we present a three-step procedure to address this problem. Step one is a novel segmentation algorithm based on image derivatives that, in combination with selective post-processing, reliably and automatically segments cell nuclei from images of densely packed tissue. Step two is a quantitative validation using synthetic images to ascertain the efficiency of the algorithm with respect to signal-to-noise ratio and object density. Finally, we propose an original method to generate reliable and experimentally faithful ground truth datasets: Sparse-dense dual-labeled embryo chimeras are used to unambiguously measure segmentation errors within experimental data. Together, the three steps outlined here establish a robust, iterative procedure to fine-tune image analysis algorithms and microscopy settings associated with embryonic 3D image data sets.

Object Segmentation and Ground Truth in 3D Embryonic Imaging

PubMed Central

Rajasekaran, Bhavna; Uriu, Koichiro; Valentin, Guillaume; Tinevez, Jean-Yves; Oates, Andrew C.

2016-01-01

Many questions in developmental biology depend on measuring the position and movement of individual cells within developing embryos. Yet, tools that provide this data are often challenged by high cell density and their accuracy is difficult to measure. Here, we present a three-step procedure to address this problem. Step one is a novel segmentation algorithm based on image derivatives that, in combination with selective post-processing, reliably and automatically segments cell nuclei from images of densely packed tissue. Step two is a quantitative validation using synthetic images to ascertain the efficiency of the algorithm with respect to signal-to-noise ratio and object density. Finally, we propose an original method to generate reliable and experimentally faithful ground truth datasets: Sparse-dense dual-labeled embryo chimeras are used to unambiguously measure segmentation errors within experimental data. Together, the three steps outlined here establish a robust, iterative procedure to fine-tune image analysis algorithms and microscopy settings associated with embryonic 3D image data sets. PMID:27332860

Use of scatterometry for resist process control

NASA Astrophysics Data System (ADS)

Bishop, Kenneth P.; Milner, Lisa-Michelle; Naqvi, S. Sohail H.; McNeil, John R.; Draper, B. L.

1992-06-01

The formation of resist lines having submicron critical dimensions (CDs) is a complex multistep process, requiring precise control of each processing step. Optimization of parameters for each processing step may be accomplished through theoretical modeling techniques and/or the use of send-ahead wafers followed by scanning electron microscope measurements. Once the optimum parameters for any process having been selected, (e.g., time duration and temperature for post-exposure bake process), no in-situ CD measurements are made. In this paper we describe the use of scatterometry to provide this essential metrology capability. It involves focusing a laser beam on a periodic grating and predicting the shape of the grating lines from a measurement of the scattered power in the diffraction orders. The inverse prediction of lineshape from a measurement of the scatter power is based on a vector diffraction analysis used in conjunction with photolithography simulation tools to provide an accurate scatter model for latent image gratings. This diffraction technique has previously been applied to looking at latent image grating formation, as exposure is taking place. We have broadened the scope of the application and consider the problem of determination of optimal focus.

Energy from Waste--clean, efficient, renewable: transitions in combustion efficiency and NOx control.

PubMed

Waldner, M H; Halter, R; Sigg, A; Brosch, B; Gehrmann, H J; Keunecke, M

2013-02-01

Traditionally EfW (Energy from Waste) plants apply a reciprocating grate to combust waste fuel. An integrated steam generator recovers the heat of combustion and converts it to steam for use in a steam turbine/generator set. This is followed by an array of flue gas cleaning technologies to meet regulatory limitations. Modern combustion applies a two-step method using primary air to fuel the combustion process on the grate. This generates a complex mixture of pyrolysis gases, combustion gases and unused combustion air. The post-combustion step in the first pass of the boiler above the grate is intended to "clean up" this mixture by oxidizing unburned gases with secondary air. This paper describes modifications to the combustion process to minimize exhaust gas volumes and the generation of noxious gases and thus improving the overall thermal efficiency of the EfW plant. The resulting process can be coupled with an innovative SNCR (Selective Non-Catalytic Reduction) technology to form a clean and efficient solid waste combustion system. Measurements immediately above the grate show that gas compositions along the grate vary from 10% CO, 5% H(2) and 0% O(2) to essentially unused "pure" air, in good agreement with results from a mathematical model. Introducing these diverse gas compositions to the post combustion process will overwhelm its ability to process all these gas fractions in an optimal manner. Inserting an intermediate step aimed at homogenizing the mixture above the grate has shown to significantly improve the quality of combustion, allowing for optimized process parameters. These measures also resulted in reduced formation of NO(x) (nitrogenous oxides) due to a lower oxygen level at which the combustion process was run (2.6 vol% O(2,)(wet) instead of 6.0 vol% O(2,)(wet)). This reduction establishes optimal conditions for the DyNOR™ (Dynamic NO(x) Reduction) NO(x) reduction process. This innovative SNCR technology is adapted to situations typically encountered in solid fuel combustion. DyNOR™ measures temperature in small furnace segments and delivers the reducing reagent to the exact location where it is most effective. The DyNOR™ distributor reacts precisely and dynamically to rapid changes in combustion conditions, resulting in very low NO(x) emissions from the stack. Copyright © 2012 Elsevier Ltd. All rights reserved.

Investigating different filter and rescaling methods on simulated GRACE-like TWS variations for hydrological applications

NASA Astrophysics Data System (ADS)

Zhang, Liangjing; Dahle, Christoph; Neumayer, Karl-Hans; Dobslaw, Henryk; Flechtner, Frank; Thomas, Maik

2016-04-01

Terrestrial water storage (TWS) variations obtained from GRACE play an increasingly important role in various hydrological and hydro-meteorological applications. Since monthly-mean gravity fields are contaminated by errors caused by a number of sources with distinct spatial correlation structures, filtering is needed to remove in particular high frequency noise. Subsequently, bias and leakage caused by the filtering need to be corrected before the final results are interpreted as GRACE-based observations of TWS. Knowledge about the reliability and performance of different post-processing methods is highly important for the GRACE users. In this contribution, we re-assess a number of commonly used post-processing methods using a simulated GRACE-like gravity field time-series based on realistic orbits and instrument error assumptions as well as background error assumptions out of the updated ESA Earth System Model. Two non-isotropic filter methods from Kusche (2007) and Swenson and Wahr (2006) are tested. Rescaling factors estimated from five different hydrological models and the ensemble median are applied to the post-processed simulated GRACE-like TWS estimates to correct the bias and leakage. Since TWS anomalies out of the post-processed simulation results can be readily compared to the time-variable Earth System Model initially used as "truth" during the forward simulation step, we are able to thoroughly check the plausibility of our error estimation assessment and will subsequently recommend a processing strategy that shall also be applied to planned GRACE and GRACE-FO Level-3 products for hydrological applications provided by GFZ. Kusche, J. (2007): Approximate decorrelation and non-isotropic smoothing of time-variable GRACE-type gravity field models. J. Geodesy, 81 (11), 733-749, doi:10.1007/s00190-007-0143-3. Swenson, S. and Wahr, J. (2006): Post-processing removal of correlated errors in GRACE data. Geophysical Research Letters, 33(8):L08402.

75 FR 78778 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... the closing of the Holmes Mill (Kentucky) Post Office has been filed. It identifies preliminary steps... Mill Post Office in Holmes Mill, Kentucky. The petition, which was filed by Dovie Hamblin (Petitioner...

76 FR 55425 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

... the closing of the Watson, Alabama post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Watson post office in Watson, Alabama. The petition was filed...

Hydrocarbon Synthesis from Carbon Dioxide and Hydrogen: A Two-Step Process

DTIC Science & Technology

2013-08-14

Energy Fuels, Just Accepted Manuscript • DOI: 10.1021/ef4011115 • Publication Date (Web): 14 Aug 2013 Downloaded from http://pubs.acs.org on August 19...2013 Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication . They are posted online prior to technical...editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community

Spike Train Auto-Structure Impacts Post-Synaptic Firing and Timing-Based Plasticity

PubMed Central

Scheller, Bertram; Castellano, Marta; Vicente, Raul; Pipa, Gordon

2011-01-01

Cortical neurons are typically driven by several thousand synapses. The precise spatiotemporal pattern formed by these inputs can modulate the response of a post-synaptic cell. In this work, we explore how the temporal structure of pre-synaptic inhibitory and excitatory inputs impact the post-synaptic firing of a conductance-based integrate and fire neuron. Both the excitatory and inhibitory input was modeled by renewal gamma processes with varying shape factors for modeling regular and temporally random Poisson activity. We demonstrate that the temporal structure of mutually independent inputs affects the post-synaptic firing, while the strength of the effect depends on the firing rates of both the excitatory and inhibitory inputs. In a second step, we explore the effect of temporal structure of mutually independent inputs on a simple version of Hebbian learning, i.e., hard bound spike-timing-dependent plasticity. We explore both the equilibrium weight distribution and the speed of the transient weight dynamics for different mutually independent gamma processes. We find that both the equilibrium distribution of the synaptic weights and the speed of synaptic changes are modulated by the temporal structure of the input. Finally, we highlight that the sensitivity of both the post-synaptic firing as well as the spike-timing-dependent plasticity on the auto-structure of the input of a neuron could be used to modulate the learning rate of synaptic modification. PMID:22203800

75 FR 74109 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... the closing of the Graves Mill, Virginia post office has been filed. It identifies preliminary steps... the Graves Mill Post Office located in Graves Mill, Virginia. The petition, which was filed by Douglas...

77 FR 1960 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... POSTAL REGULATORY COMMISSION [Docket No. A2012-103; Order No. 1104] Post Office Closing AGENCY... the closing of the Shaftsburg, Michigan post office has been filed. It identifies preliminary steps... two [[Page 1961

76 FR 58057 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... the closing of the Burnt Prairie, Illinois post office has been filed. It identifies preliminary steps... determination to close the Burnt Prairie post office in Burnt Prairie, Illinois. The petition was filed by...

Sperm kinematics and subpopulational responses during the cryopreservation process in caprine ejaculates.

PubMed

Barbas, J P; Leahy, T; Horta, A E; García-Herreros, M

2018-03-20

Sperm cryopreservation in goats has been a challenge for many years due to the detrimental effects of seminal plasma enzymes produced by the bulbo-urethral glands which catalyse the hydrolysis of lecithins in egg yolk to fatty acids and lysolecithins which are deleterious to spermatozoa. This fact implies to carry out additional processing steps during sperm cryopreservation for seminal plasma removal triggering different sperm responses which may affect sperm functionality. The objective of the present study was to determine specific sperm subpopulation responses in different handling steps during the cryopreservation process by using functional sperm kinematic descriptors in caprine ejaculates. Buck ejaculates (n = 40) were analysed for sperm concentration, viability, morphology and acrosome integrity. Moreover, sperm motility was assessed using a computer-assisted sperm analysis (CASA) system after five different handling steps (fresh sperm, 1st washing, 2nd washing, cooling and frozen-thawed sperm) during a standard cryopreservation protocol for goat semen. The results were analysed using Principal Component Analysis (PCA) and multivariate clustering procedures to establish the relationship between the distribution of the subpopulations found and the functional sperm motility in each step. Except for the 1st and 4th steps, four sperm kinematic subpopulations were observed explaining more than 75% of the variance. Based on velocity and linearity parameters and the subpopulations disclosed, the kinematic response varies among processing steps modifying sperm movement trajectories in a subpopulation-specific and handling step-dependent manner (p < 0.001). The predominant motile subpopulation in freshly ejaculated buck sperm had very fast velocity characteristics and a non-linear trajectory (41.1%). Washing buck sperm twice altered the subpopulation structure as well as cooling which resulted in a dramatic reduction in sperm velocities (p < 0.01). Frozen-thawed spermatozoa showed similar characteristics to cooled sperm except there was a further increase in linearity with a large proportion of sperm attributed to new slow, linear cluster (32.5%). In conclusion, this study confirms the variability and heterogeneity of goat sperm kinematic patterns throughout the cryopreservation process and suggests that the predominant motility pattern (assayed in vitro via CASA) of high quality spermatozoa might be typified by high speed and a non-linear trajectory. The relationships among the number and distribution of sperm subpopulations and the different handling steps were particularlly relevant, specially after the cooling and the post-thawing steps, when effects derived from these critical handling steps were evident and altered drastically the sperm motion patterns. Copyright © 2018 Elsevier Inc. All rights reserved.

76 FR 69771 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-39; Order No. 945] Post Office Closing AGENCY... the closing of the Kettlersville, Ohio post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Kettlersville post office in Kettlersville, Ohio. The...

76 FR 68516 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... POSTAL REGULATORY COMMISSION [Docket No. A2012-33; Order No. 939] Post Office Closing AGENCY... the closing of the Woodstock, Minnesota post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Woodstock post office in Woodstock, Minnesota. The first...

76 FR 72727 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-25

... POSTAL REGULATORY COMMISSION [Docket No. A2012-51; Order No. 980] Post Office Closing AGENCY... the closing of the Lafayette, Kentucky post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Lafayette post office in Lafayette, Kentucky. The petition...

76 FR 60947 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

... POSTAL REGULATORY COMMISSION [Docket No. A2011-84; Order No. 874] Post Office Closing AGENCY... the closing of the Jordanville, New York post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Jordanville post office in Jordanville, New York. The...

76 FR 55951 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... POSTAL REGULATORY COMMISSION [Docket No. A2011-58; Order No. 838] Post Office Closing AGENCY... the closing of the Bentonville, Ohio post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Bentonville post office in Bentonville, Ohio. The petition...

76 FR 64131 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... POSTAL REGULATORY COMMISSION [Docket No. A2012-2; Order No. 898] Post Office Closing AGENCY... the closing of the Bloomington, Idaho post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Bloomington post office in Bloomington, Idaho. The petitions...

Does bone debris in anterior cruciate ligament reconstruction really matter? A cohort study of a protocol for bone debris debridement

PubMed Central

Imam, Mohamed A.; Abdelkafy, Ashraf; Dinah, Feroz; Adhikari, Ajeya

2015-01-01

Background: The purpose of the current study was to determine whether a systematic five-step protocol for debridement and evacuation of bone debris during anterior cruciate ligament reconstruction (ACLR) reduces the presence of such debris on post-operative radiographs. Methods: A five-step protocol for removal of bone debris during arthroscopic assisted ACLR was designed. It was applied to 60 patients undergoing ACLR (Group 1), and high-quality digital radiographs were taken post-operatively in each case to assess for the presence of intra-articular bone debris. A control group of 60 consecutive patients in whom no specific bone debris protocol was applied (Group 2) and their post-operative radiographs were also checked for the presence of intra-articular bone debris. Results: In Group 1, only 15% of post-operative radiographs showed residual bone debris, compared to 69% in Group 2 (p < 0.001). Conclusion: A five-step systematic protocol for bone debris removal during arthroscopic assisted ACLR resulted in a significant decrease in residual bone debris seen on high-quality post-operative radiographs. PMID:27163060

Incidence, populations and diversity of fungi from raw materials, final products and air of processing environment of multigrain whole meal bread.

PubMed

Santos, Juliana Lane Paixão Dos; Bernardi, Angélica Olivier; Pozza Morassi, Letícia L; Silva, Beatriz S; Copetti, Marina Venturini; S Sant'Ana, Anderson

2016-09-01

This study aimed to assess the incidence, to quantify and to assess the diversity of fungi in a multigrain whole meal bread processing plant. Two hundred and eight one (n=281) samples were analyzed, including raw materials (n=120), air samples (n=136) and multigrain breads (n=25). Among the raw materials, the whole corn flour showed the highest counts of fungi (4.8logCFU/g), followed by whole-wheat flour (3.1logCFU/g). The counts of fungi in the air of processing environment were higher in post-baking steps (oven output, cooling, slicing, packaging) than in pre-baking steps (weighing and mixer) (p<0.05). Species of fungi isolated from spoiled bread samples stored at 5, 20, 25 and 30, and 40°C corresponded mostly to Penicillium paneum and Penicillium polonicum isolated from 20 and 24% of samples, respectively. These species were also isolated from raw materials (P. paneum and P. polonicum) and air collected at different processing sampling points (P. polonicum). The high counts of filamentous fungi in raw materials and air samples in processing steps such as cooling, slicing, and packaging, suggest that contamination that may occur in these steps can be critical for the shelf life of breads. The results of this study highlight that the prevention of contamination of breads by fungal spores is still a challenge for bakery industries and that other strategies such as control of germination and growth of spoilage fungi through the development of more stable formulations have to be developed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sequential electrokinetic treatment and oxalic acid extraction for the removal of Cu, Cr and As from wood.

PubMed

Isosaari, Pirjo; Marjavaara, Pieti; Lehmus, Eila

2010-10-15

Removal of Cu, Cr and As from utility poles treated with chromated copper arsenate (CCA) was investigated using different one- to three-step combinations of oxalic acid extraction and electrokinetic treatment. The experiments were carried out at room temperature, using 0.8% oxalic acid and 30 V (200 V/m) of direct current (DC) or alternating current in combination (DC/AC). Six-hour extraction removed only 15%, 11% and 28% and 7-day electrokinetic treatment 57%, 0% and 17% of Cu, Cr and As from wood chips, respectively. The best combination for all the metals was a three-step process consisting of pre-extraction, electrokinetics and post-extraction steps, yielding removals of 67% for Cu, 64% for Cr and 81% for As. Oxalic acid extraction prior to electrokinetic treatment was deleterious to further removal of Cu, but it was necessary for Cr and As removal. Chemical equilibrium modelling was used to explain the differences in the behaviour of Cu, Cr and As. Due to the dissimilar nature of these metals, it appeared that even more process sequences and/or stricter control of the process conditions would be needed to obtain the >99% removals required for safe recycling of the purified wood material. 2010 Elsevier B.V. All rights reserved.

Automatic localization of cochlear implant electrodes in CTs with a limited intensity range

NASA Astrophysics Data System (ADS)

Zhao, Yiyuan; Dawant, Benoit M.; Noble, Jack H.

2017-02-01

Cochlear implants (CIs) are neural prosthetics for treating severe-to-profound hearing loss. Our group has developed an image-guided cochlear implant programming (IGCIP) system that uses image analysis techniques to recommend patientspecific CI processor settings to improve hearing outcomes. One crucial step in IGCIP is the localization of CI electrodes in post-implantation CTs. Manual localization of electrodes requires time and expertise. To automate this process, our group has proposed automatic techniques that have been validated on CTs acquired with scanners that produce images with an extended range of intensity values. However, there are many clinical CTs acquired with a limited intensity range. This limitation complicates the electrode localization process. In this work, we present a pre-processing step for CTs with a limited intensity range and extend the methods we proposed for full intensity range CTs to localize CI electrodes in CTs with limited intensity range. We evaluate our method on CTs of 20 subjects implanted with CI arrays produced by different manufacturers. Our method achieves a mean localization error of 0.21mm. This indicates our method is robust for automatic localization of CI electrodes in different types of CTs, which represents a crucial step for translating IGCIP from research laboratory to clinical use.

Technological characteristics of pre- and post-rigor deboned beef mixtures from Holstein steers and quality attributes of cooked beef sausage.

PubMed

Sukumaran, Anuraj T; Holtcamp, Alexander J; Campbell, Yan L; Burnett, Derris; Schilling, Mark W; Dinh, Thu T N

2018-06-07

The objective of this study was to determine the effects of deboning time (pre- and post-rigor), processing steps (grinding - GB; salting - SB; batter formulation - BB), and storage time on the quality of raw beef mixtures and vacuum-packaged cooked sausage, produced using a commercial formulation with 0.25% phosphate. The pH was greater in pre-rigor GB and SB than in post-rigor GB and SB (P < .001). However, deboning time had no effect on metmyoglobin reducing activity, cooking loss, and color of raw beef mixtures. Protein solubility of pre-rigor beef mixtures (124.26 mg/kg) was greater than that of post-rigor beef (113.93 mg/kg; P = .071). TBARS were increased in BB but decreased during vacuum storage of cooked sausage (P ≤ .018). Except for chewiness and saltiness being 52.9 N-mm and 0.3 points greater in post-rigor sausage (P = .040 and 0.054, respectively), texture profile analysis and trained panelists detected no difference in texture between pre- and post-rigor sausage. Published by Elsevier Ltd.

76 FR 45882 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-01

... POSTAL REGULATORY COMMISSION [Docket No. A2011-28; Order No. 771] Post Office Closing AGENCY... the closing of the Goodwin, Arkansas post office has been filed. It identifies preliminary steps and... to close the post office in Goodwin, Arkansas. The petition was filed by Randy Jones (Petitioner...

77 FR 1963 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... POSTAL REGULATORY COMMISSION [Docket No. A2012-101; Order No. 1102] Post Office Closing AGENCY... the closing of the Cardwell, Montana post office has been filed. It identifies preliminary steps and... petitions for review of the Postal Service's determination to close the Cardwell post office in Cardwell...

76 FR 51436 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... POSTAL REGULATORY COMMISSION [Docket No. A2011-45; Order No. 801] Post Office Closing AGENCY... the closing of the Sublime, Texas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the post office in Sublime, Texas. The petition was filed by...

77 FR 1959 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... POSTAL REGULATORY COMMISSION [Docket No. A2012-102; Order No. 1103] Post Office Closing AGENCY... the closing of the Parlin, Colorado post office has been filed. It identifies preliminary steps and... for review of the Postal Service's determination to close the Parlin post office in Parlin, Colorado...

76 FR 69770 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-37; Order No. 943] Post Office Closing AGENCY... the closing of the Boles, Arkansas post office has been filed. It identifies preliminary steps and... review of the Postal Service's determination to close the Boles post office in Boles, Arkansas. The...

76 FR 77026 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-77; Order No. 1020] Post Office Closing AGENCY... the closing of the Niagara, North Dakota post office has been filed. It identifies preliminary steps... the Postal Service's determination to close the Niagara post office in Niagara, North Dakota. The...

76 FR 80414 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... POSTAL REGULATORY COMMISSION [Docket No. A2012-87; Order No. 1044] Post Office Closing AGENCY... the closing of the Freeport, Kansas post office has been filed. It identifies preliminary steps and... Commission received a petition for review of the Postal Service's determination to close the Freeport post...

76 FR 64978 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... POSTAL REGULATORY COMMISSION [Docket No. A2012-8; Order No. 905] Post Office Closing AGENCY... the closing of the Rhodell, West Virginia post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Rhodell post office in Rhodell, West Virginia. The petition...

76 FR 68514 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... POSTAL REGULATORY COMMISSION [Docket No. A2012-32; Order No. 938] Post Office Closing AGENCY... the closing of the Barronett, Wisconsin post office has been filed. It identifies preliminary steps... petitions for review of the Postal Service's determination to close the Barronett post office in Barronett...

76 FR 76774 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... POSTAL REGULATORY COMMISSION [Docket No. A2012-74; Order No. 1018] Post Office Closing AGENCY... the closing of the Spring Lake, Minnesota post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Spring Lake post office in Spring Lake, Minnesota. The...

76 FR 72728 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-25

... POSTAL REGULATORY COMMISSION [Docket No. A2012-52; Order No. 983] Post Office Closing AGENCY... the closing of the Swaledale, Iowa post office has been filed. It identifies preliminary steps and... determination to close the Swaledale post office in Swaledale, Iowa. The first petition for review received...

76 FR 52720 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

... POSTAL REGULATORY COMMISSION [Docket No. A2011-47; Order No. 805] Post Office Closing AGENCY... the closing of the Francitas, Texas post office has been filed. It identifies preliminary steps and... determination to close the post office in Francitas, Texas. The petition was filed by Carolina Jalufka...

76 FR 45624 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... POSTAL REGULATORY COMMISSION [Docket No. A2011-26; Order No. 768] Post Office Closing AGENCY... the closing of the Hamilton, Iowa post office has been filed. It identifies preliminary steps and... to close the post office in Hamilton, Iowa. The petition, which was filed by Bruce Pettyjohn...

76 FR 64979 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... POSTAL REGULATORY COMMISSION [Docket No. A2012-9; Order No. 906] Post Office Closing AGENCY... the closing of the Humbird, Wisconsin post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Humbird post office in Humbird, Wisconsin. The petition for...

77 FR 1958 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... POSTAL REGULATORY COMMISSION [Docket No. A2012-100; Order No. 1101] Post Office Closing AGENCY... the closing of the Jonesville, Texas post office has been filed. It identifies preliminary steps and... for review of the Postal Service's determination to close the Jonesville post office in Jonesville...

76 FR 46331 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

... POSTAL REGULATORY COMMISSION [Docket No. A2011-29; Order No. 772] Post Office Closing AGENCY... the closing of the Bigelow, Arkansas post office has been filed. It identifies preliminary steps and... to close the post office in Bigelow, Arkansas. The petition was filed by Brad Akridge, Mayor...

76 FR 69773 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-40; Order No. 946] Post Office Closing AGENCY... the closing of the Beech Grove, Kentucky post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Beech Grove post office in Beech Grove, Kentucky. The...

76 FR 68795 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... POSTAL REGULATORY COMMISSION [Docket No. A2012-35; Order No. 941] Post Office Closing AGENCY... the closing of the Rembrandt, Iowa post office has been filed. It identifies preliminary steps and... the Postal Service's determination to close the Rembrandt post office in Rembrandt, Iowa. The first...

76 FR 47274 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-04

... POSTAL REGULATORY COMMISSION [Docket No. A2011-34; Order No. 782] Post Office Closing AGENCY... the closing of the Innis, Louisiana post office has been filed. It identifies preliminary steps and... to close the post office in Innis, Louisiana. The petition was filed by Larry Rebalais (Petitioner...

76 FR 71083 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... POSTAL REGULATORY COMMISSION [Docket No. A2012-43; Order No. 960] Post Office Closing AGENCY... the closing of the Andover, Illinois post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Andover post office in Andover, Illinois. The petition for...

77 FR 1751 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... POSTAL REGULATORY COMMISSION [Docket No. A2012-95; Order No. 1083] Post Office Closing AGENCY... the closing of the Strandquist, Minnesota post office has been filed. It identifies preliminary steps... close the Strandquist post office in Strandquist, Minnesota. The petition for review was filed by Eunice...

77 FR 4377 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

... POSTAL REGULATORY COMMISSION [Docket No. A2012-111; Order No. 1154] Post Office Closing AGENCY... the closing of the Randolph, Iowa post office has been filed. It identifies preliminary steps and... petition for review of the Postal Service's determination to close the Randolph post office in Randolph...

76 FR 67773 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-24; Order No. 928] Post Office Closing AGENCY... the closing of the Ozan, Arkansas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Ozan post office in Ozan, Arkansas. The petition for review...

76 FR 64130 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... POSTAL REGULATORY COMMISSION [Docket No. A2012-3; Order No. 899] Post Office Closing AGENCY... the closing of the Scott, Mississippi post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Scott post office in Scott, Mississippi. The petition for...

76 FR 71084 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... POSTAL REGULATORY COMMISSION [Docket No. A2012-45; Order No. 962] Post Office Closing AGENCY... the closing of the Orchard, Iowa post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Orchard post office in Orchard, Iowa. The first petition for...

76 FR 73743 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... POSTAL REGULATORY COMMISSION [Docket No. A2012-55; Order No. 989] Post Office Closing AGENCY... the closing of the Nemaha, Nebraska post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Nemaha post office in Nemaha, Nebraska. The petition for...

76 FR 64129 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... POSTAL REGULATORY COMMISSION [Docket No. A2012-4; Order No. 900] Post Office Closing AGENCY... the closing of the Balm, Florida post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Balm post office in Balm, Florida. The petition for review...

76 FR 82003 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... POSTAL REGULATORY COMMISSION [Docket No. A2012-91; Order No. 1064] Post Office Closing AGENCY... the closing of the Fostoria, Iowa post office has been filed. It identifies preliminary steps and... five petitions for review of the Postal Service's determination to close the Fostoria post office in...

76 FR 67002 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... POSTAL REGULATORY COMMISSION [Docket No. A2012-13; Order No. 914] Post Office Closing AGENCY... the closing of the New Hampton, Missouri post office has been filed. It identifies preliminary steps... Postal Service's determination to close the New Hampton post office in New Hampton, Missouri. The...

76 FR 73745 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... POSTAL REGULATORY COMMISSION [Docket No. A2012-58; Order No. 992] Post Office Closing AGENCY... the closing of the Deering, Missouri post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Deering post office in Deering, Missouri. The petition for...

76 FR 28103 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... POSTAL REGULATORY COMMISSION [Docket No. A2011-15; Order No. 726] Post Office Closing AGENCY... the closing of the Gywnedd, Pennsylvania post office has been filed. It identifies preliminary steps..., Pennsylvania post office. The petition, which was filed by Christina Surowiec (Petitioner), is postmarked May 2...

76 FR 76202 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

... POSTAL REGULATORY COMMISSION [Docket No. A2012-64; Order No. 1006] Post Office Closing AGENCY... the closing of the Little America, Wyoming post office has been filed. It identifies preliminary steps... for review of the Postal Service's determination to close the Little America post office in Little...

77 FR 4383 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

... POSTAL REGULATORY COMMISSION [Docket No. A2012-112; Order No. 1155] Post Office Closing AGENCY... the closing of the Elwell, Michigan post office has been filed. It identifies preliminary steps and... three petitions for review of the Postal Service's determination to close the Elwell post office in...

76 FR 78319 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... POSTAL REGULATORY COMMISSION [Docket No. A2012-81; Order No. 1030] Post Office Closing AGENCY... the closing of the Phippsburg, Colorado post office has been filed. It identifies preliminary steps... petitions for review of the Postal Service's determination to close the Phippsburg post office in Phippsburg...

76 FR 70175 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... POSTAL REGULATORY COMMISSION [Docket No. A2012-38; Order No. 944] Post Office Closing AGENCY... the closing of the New Boston, Illinois post office has been filed. It identifies preliminary steps... Postal Service's determination to close the New Boston post office in New Boston, Illinois. The first...

76 FR 65545 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

... POSTAL REGULATORY COMMISSION [Docket No. A2012-10; Order No. 908] Post Office Closing AGENCY... the closing of the Agate, Colorado post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Agate post office in Agate, Colorado. The petition for review...

76 FR 75569 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-60; Order No. 1001] Post Office Closing AGENCY... the closing of the Prescott, Iowa post office has been filed. It identifies preliminary steps and... determination to close the Prescott post office in Prescott, Iowa. The first petition for review received...

76 FR 64133 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... POSTAL REGULATORY COMMISSION [Docket No. A2012-7; Order No. 904] Post Office Closing AGENCY... the closing of the Campaign, Tennessee post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Campaign post office in Campaign, Tennessee. The petition for...

77 FR 3809 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... POSTAL REGULATORY COMMISSION [Docket No. A2012-106; Order No. 1145] Post Office Closing AGENCY... the closing of the Pierceville, Indiana post office has been filed. It identifies preliminary steps... three petitions for review of the Postal Service's determination to close the Pierceville post office in...

77 FR 5064 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-01

... POSTAL REGULATORY COMMISSION [Docket No. A2012-116; Order No. 1175] Post Office Closing AGENCY... the closing of the Imperial, Texas post office has been filed. It identifies preliminary steps and... four petitions for review of the Postal Service's determination to close the Imperial post office in...

76 FR 67498 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... POSTAL REGULATORY COMMISSION [Docket No. A2012-17; Order No. 918] Post Office Closing AGENCY... the closing of the Venice, California post office has been filed. It identifies preliminary steps and... application for suspension of the Postal Service's determination to close the Venice post office in Venice...

76 FR 67770 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-23; Order No. 927] Post Office Closing AGENCY... the closing of the Fairfield, Kentucky post office has been filed. It identifies preliminary steps and... application for suspension of the Postal Service's determination to close the Fairfield post office in...

76 FR 73746 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... POSTAL REGULATORY COMMISSION [Docket No. A2012-56; Order No. 990] Post Office Closing AGENCY... the closing of the Rippey, Iowa post office has been filed. It identifies preliminary steps and... review of the Postal Service's determination to close the Rippey post office in Rippey, Iowa. The...

76 FR 55952 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... POSTAL REGULATORY COMMISSION [Docket No. A2011-59; Order No. 839] Post Office Closing AGENCY... the closing of the Velpen, Indiana post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Velpen post office in Velpen, Indiana. The petition was filed...

76 FR 67766 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-21; Order No. 925] Post Office Closing AGENCY... the closing of the Saratoga, Arkansas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Saratoga post office in Saratoga, Arkansas. The petition for...

76 FR 67767 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-25; Order No. 929] Post Office Closing AGENCY... the closing of the Glenwood, Alabama post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Glenwood post office in Glenwood, Alabama. The petition for...

76 FR 67001 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... POSTAL REGULATORY COMMISSION [Docket No. A2012-14; Order No. 915] Post Office Closing AGENCY... the closing of the Witter, Arkansas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Witter post office in Witter, Arkansas. The petition for...

76 FR 75918 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-05

... POSTAL REGULATORY COMMISSION [Docket No. A2012-62; Order No. 1003] Post Office Closing AGENCY... the closing of the Lanagan, Missouri post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Lanagan post office in Lanagan, Missouri. The petition for...

76 FR 44054 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

... POSTAL REGULATORY COMMISSION [Docket No. A2011-21; Order No. 761] Post Office Closing AGENCY... the closing of the Ukiah, California Main Post Office has been filed. It identifies preliminary steps... Office, Ukiah, California. The petition, which was filed by the Save Ukiah Post Office Committee and...

76 FR 70174 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... POSTAL REGULATORY COMMISSION [Docket No. A2012-42; Order No. 949] Post Office Closing AGENCY... the closing of the Amoret, Missouri post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Amoret post office in Amoret, Missouri. The petition for...

77 FR 4381 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

... POSTAL REGULATORY COMMISSION [Docket No. A2012-113; Order No. 1156] Post Office Closing AGENCY... the closing of the Peterson, Minnesota post office has been filed. It identifies preliminary steps and... petition for review of the Postal Service's determination to close the Peterson post office in Peterson...

76 FR 67003 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... POSTAL REGULATORY COMMISSION [Docket No. A2012-16; Order No. 917] Post Office Closing AGENCY... the closing of the Adona, Arkansas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Adona post office in Adona, Arkansas. The petition for review...

76 FR 75916 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-05

... POSTAL REGULATORY COMMISSION [Docket No. A2012-61; Order No. 1002] Post Office Closing AGENCY... the closing of the Prince, West Virginia post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Prince post office in Prince, West Virginia. The petition for...

Self-triggered assistive stimulus training improves step initiation in persons with Parkinson’s disease

PubMed Central

2013-01-01

Background Prior studies demonstrated that hesitation-prone persons with Parkinson’s disease (PDs) acutely improve step initiation using a novel self-triggered stimulus that enhances lateral weight shift prior to step onset. PDs showed reduced anticipatory postural adjustment (APA) durations, earlier step onsets, and faster 1st step speed immediately following stimulus exposure. Objective This study investigated the effects of long-term stimulus exposure. Methods Two groups of hesitation-prone subjects with Parkinson’s disease (PD) participated in a 6-week step-initiation training program involving one of two stimulus conditions: 1) Drop. The stance-side support surface was lowered quickly (1.5 cm); 2) Vibration. A short vibration (100 ms) was applied beneath the stance-side support surface. Stimuli were self-triggered by a 5% reduction in vertical force under the stance foot during the APA. Testing was at baseline, immediately post-training, and 6 weeks post-training. Measurements included timing and magnitude of ground reaction forces, and step speed and length. Results Both groups improved their APA force modulation after training. Contrary to previous results, neither group showed reduced APA durations or earlier step onset times. The vibration group showed 55% increase in step speed and a 39% increase in step length which were retained 6 weeks post-training. The drop group showed no stepping-performance improvements. Conclusions The acute sensitivity to the quickness-enhancing effects of stimulus exposure demonstrated in previous studies was supplanted by improved force modulation following prolonged stimulus exposure. The results suggest a potential approach to reduce the severity of start hesitation in PDs, but further study is needed to understand the relationship between short- and long-term effects of stimulus exposure. PMID:23363975

A Computer-Aided Type-II Fuzzy Image Processing for Diagnosis of Meniscus Tear.

PubMed

Zarandi, M H Fazel; Khadangi, A; Karimi, F; Turksen, I B

2016-12-01

Meniscal tear is one of the prevalent knee disorders among young athletes and the aging population, and requires correct diagnosis and surgical intervention, if necessary. Not only the errors followed by human intervention but also the obstacles of manual meniscal tear detection highlight the need for automatic detection techniques. This paper presents a type-2 fuzzy expert system for meniscal tear diagnosis using PD magnetic resonance images (MRI). The scheme of the proposed type-2 fuzzy image processing model is composed of three distinct modules: Pre-processing, Segmentation, and Classification. λ-nhancement algorithm is used to perform the pre-processing step. For the segmentation step, first, Interval Type-2 Fuzzy C-Means (IT2FCM) is applied to the images, outputs of which are then employed by Interval Type-2 Possibilistic C-Means (IT2PCM) to perform post-processes. Second stage concludes with re-estimation of "η" value to enhance IT2PCM. Finally, a Perceptron neural network with two hidden layers is used for Classification stage. The results of the proposed type-2 expert system have been compared with a well-known segmentation algorithm, approving the superiority of the proposed system in meniscal tear recognition.

Ex Post Facto Monte Carlo Variance Reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Booth, Thomas E.

The variance in Monte Carlo particle transport calculations is often dominated by a few particles whose importance increases manyfold on a single transport step. This paper describes a novel variance reduction method that uses a large importance change as a trigger to resample the offending transport step. That is, the method is employed only after (ex post facto) a random walk attempts a transport step that would otherwise introduce a large variance in the calculation.Improvements in two Monte Carlo transport calculations are demonstrated empirically using an ex post facto method. First, the method is shown to reduce the variance inmore » a penetration problem with a cross-section window. Second, the method empirically appears to modify a point detector estimator from an infinite variance estimator to a finite variance estimator.« less

A grid-based tropospheric product for China using a GNSS network

NASA Astrophysics Data System (ADS)

Zhang, Hongxing; Yuan, Yunbin; Li, Wei; Zhang, Baocheng; Ou, Jikun

2017-11-01

Tropospheric delay accounts for one source of error in global navigation satellite systems (GNSS). To better characterize the tropospheric delays in the temporal and spatial domain and facilitate the safety-critical use of GNSS across China, a method is proposed to generate a grid-based tropospheric product (GTP) using the GNSS network with an empirical tropospheric model, known as IGGtrop. The prototype system generates the GTPs in post-processing and real-time modes and is based on the undifferenced and uncombined precise point positioning (UU-PPP) technique. GTPs are constructed for a grid form (2.0{°}× 2.5{°} latitude-longitude) over China with a time resolution of 5 min. The real-time GTP messages are encoded in a self-defined RTCM3 format and broadcast to users using NTRIP (networked transport of RTCM via internet protocol), which enables efficient and safe transmission to real-time users. Our approach for GTP generation consists of three sequential steps. In the first step, GNSS-derived zenith tropospheric delays (ZTDs) for a network of GNSS stations are estimated using UU-PPP. In the second step, vertical adjustments for the GNSS-derived ZTDs are applied to address the height differences between the GNSS stations and grid points. The ZTD height corrections are provided by the IGGtrop model. Finally, an inverse distance weighting method is used to interpolate the GNSS-derived ZTDs from the surrounding GNSS stations to the location of the grid point. A total of 210 global positioning system (GPS) stations from the crustal movement observation network of China are used to generate the GTPs in both post-processing and real-time modes. The accuracies of the GTPs are assessed against with ERA-Interim-derived ZTDs and the GPS-derived ZTDs at 12 test GPS stations, respectively. The results show that the post-processing and real-time GTPs can provide the ZTDs with accuracies of 1.4 and 1.8 cm, respectively. We also apply the GTPs in real-time kinematic GPS PPP, and the results show that the convergence time of the PPP solutions is shortened. These results confirm that the GTPs can act as an efficient information source to augment GNSS positioning over China.

Low-loss 3D-laser-written mid-infrared LiNbO₃ depressed-index cladding waveguides for both TE and TM polarizations.

PubMed

Nguyen, Huu-Dat; Ródenas, Airán; Vázquez de Aldana, Javier R; Martín, Guillermo; Martínez, Javier; Aguiló, Magdalena; Pujol, Maria Cinta; Díaz, Francesc

2017-02-20

We report mid-infrared LiNbO₃ depressed-index microstructured cladding waveguides fabricated by three-dimensional laser writing showing low propagation losses (~1.5 dB/cm) at 3.68 µm wavelength for both the transverse electric and magnetic polarized modes, a feature previously unachieved due to the strong anisotropic properties of this type of laser microstructured waveguides and which is of fundamental importance for many photonic applications. Using a heuristic modeling-testing iteration design approach which takes into account cladding induced stress-optic index changes, the fabricated cladding microstructure provides low-loss single mode operation for the mid-IR for both orthogonal polarizations. The dependence of the localized refractive index changes within the cladding microstructure with post-fabrication thermal annealing processes was also investigated, revealing its complex dependence of the laser induced refractive index changes on laser fabrication conditions and thermal post-processing steps. The waveguide modes properties and their dependence on thermal post-processing were numerically modeled and fitted to the experimental values by systematically varying three fundamental parameters of this type of waveguides: depressed refractive index values at sub-micron laser-written tracks, track size changes, and piezo-optic induced refractive index changes.

76 FR 62463 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-95; Order No. 888] Post Office Closing AGENCY... the closing of the Carolina, West Virginia post office has been filed. It identifies preliminary steps... determination to close the Carolina post office in Carolina, West Virginia. The petition for review was filed by...

76 FR 59749 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... POSTAL REGULATORY COMMISSION [Docket No. A2011-77; Order No. 866] Post Office Closing AGENCY... the closing of the Martinsburg, New York post office has been filed. It identifies preliminary steps... determination to close the Martinsburg post office in Martinsburg, New York. The petition was filed by the...

77 FR 1962 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... POSTAL REGULATORY COMMISSION [Docket No. A2012-104; Order No. 1105] Post Office Closing AGENCY... the closing of the Daisy, Georgia post office has been filed. It identifies preliminary steps and... petitions for review of the Postal Service's determination to close the Daisy post office in Daisy, Georgia...

76 FR 60561 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... POSTAL REGULATORY COMMISSION [Docket No. A2011-81; Order No. 870] Post Office Closing AGENCY... the closing of the Clarksville, New York post office has been filed. It identifies preliminary steps... determination to close the Clarksville post office in Clarksville, New York. The petition was filed online by...

76 FR 60559 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... POSTAL REGULATORY COMMISSION [Docket No. A2011-78; Order No. 867] Post Office Closing AGENCY... the closing of the Smyrna, New York post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Smyrna post office in Smyrna, New York. The petition was...

76 FR 80413 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... POSTAL REGULATORY COMMISSION [Docket No. A2012-88; Order No. 1045] Post Office Closing AGENCY... the closing of the Alplaus, New York post office has been filed. It identifies preliminary steps and... received a petition for review of the Postal Service's determination to close the Alplaus post office in...

76 FR 59453 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... POSTAL REGULATORY COMMISSION [Docket No. A2011-76; Order No. 863] Post Office Closing AGENCY... the closing of the Templeville, Maryland post office has been filed. It identifies preliminary steps... determination to close the Ellisburg post office in Ellisburg, New York. The petition was filed by Winford J...

76 FR 58312 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... POSTAL REGULATORY COMMISSION [Docket No. A2011-69; Order No. 853] Post Office Closing AGENCY... the closing of the Old Chatham, New York post office has been filed. It identifies preliminary steps... Postal Service's determination to close the Old Chatham post office in Old Chatham, New York. The...

76 FR 63678 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

... POSTAL REGULATORY COMMISSION [Docket No. A2011-101; Order No. 894] Post Office Closing AGENCY... the closing of the Lorraine, New York post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Lorraine post office in Lorraine, New York. The petition for...

76 FR 77025 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-78; Order No. 1021] Post Office Closing AGENCY... the closing of the Avalon, Texas post office has been filed. It identifies preliminary steps and... for review of the Postal Service's determination to close the Avalon post office in Avalon, Texas. The...

76 FR 57768 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... POSTAL REGULATORY COMMISSION [Docket No. A2011-65; Order No. 848] Post Office Closing AGENCY... the closing of the Sharpsburg, Iowa post office has been filed. It identifies preliminary steps and... determination to close the Sharpsburg post office in Sharpsburg, Iowa. The petition was filed by Dean and...

76 FR 62466 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-100; Order No. 893] Post Office Closing AGENCY... the closing of the Mallory, New York post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Mallory post office in Mallory, New York. The petition for...

76 FR 81548 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

... POSTAL REGULATORY COMMISSION [Docket No. A2012-90; Order No. 1063] Post Office Closing AGENCY... the closing of the Alexander, Kansas post office has been filed. It identifies preliminary steps and... received a petition for review of the Postal Service's determination to close the Alexander post office in...

76 FR 58847 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-22

... POSTAL REGULATORY COMMISSION [Docket No. A2011-73; Order No. 858] Post Office Closing AGENCY... the closing of the Langston, Alabama post office has been filed. It identifies preliminary steps and... determination to close the Langston post office in Langston, Alabama. The petition was filed by Donald J. Hahn...

76 FR 46334 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

... POSTAL REGULATORY COMMISSION [Docket No. A2011-32; Order No. 775] Post Office Closing AGENCY... the closing of the Chillicothe, Iowa post office has been filed. It identifies preliminary steps and... to close the post office in Chillicothe, Iowa. The petition was filed by Jason Van Der Veer...

76 FR 49799 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-11

... POSTAL REGULATORY COMMISSION [Docket No. A2011-39; Order No. 793] Post Office Closing AGENCY... the closing of the Ulman, Missouri post office has been filed. It identifies preliminary steps and... determination to close the post office in Ulman, Missouri. The petition was filed by Buster McGowin (Petitioner...

76 FR 48924 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... POSTAL REGULATORY COMMISSION [Docket No. A2011-37; Order No. 788] Post Office Closing AGENCY... the closing of the Thayer, Iowa post office has been filed. It identifies preliminary steps and... to close the post office in Thayer, Iowa. The petition was filed by Mike Tonelli (Petitioner) and is...

76 FR 49800 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-11

... POSTAL REGULATORY COMMISSION [Docket No. A2011-38; Order No. 792] Post Office Closing AGENCY... the closing of the Masonville, Iowa post office has been filed. It identifies preliminary steps and... determination to close the post office in Masonville, Iowa. The petition was filed by Nellie Marting (Petitioner...

76 FR 69297 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... POSTAL REGULATORY COMMISSION [Docket No. A2012-36; Order No. 942] Post Office Closing AGENCY... the closing of the East Poland, Maine post office has been filed. It identifies preliminary steps and... petitions for review of the Postal Service's determination to close the East Poland post office in East...

76 FR 48923 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... POSTAL REGULATORY COMMISSION [Docket No. A2011-36; Order No. 787] Post Office Closing AGENCY... the closing of the Hoxie, Iowa post office has been filed. It identifies preliminary steps and... to close the post office in Hoxie, Arkansas. The petition was filed by Lanny Tinker, Mayor of the...

76 FR 59451 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... POSTAL REGULATORY COMMISSION [Docket No. A2011-74; Order No. 861] Post Office Closing AGENCY... the closing of the Coyote, New Mexico post office has been filed. It identifies preliminary steps and... determination to close the Coyote post office in Coyote, New Mexico. The petition was filed by Manuelita...

76 FR 61760 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... POSTAL REGULATORY COMMISSION [Docket No. A2011-88; Order No. 880 Post Office Closing AGENCY... the closing of the Breaks, Virginia post office has been filed. It identifies preliminary steps and... determination to close the Breaks post office in Breaks, Virginia. The petition was filed by Keith Mullins...

76 FR 62464 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-94; Order No. 887] Post Office Closing AGENCY... the closing of the Auburn, West Virginia post office has been filed. It identifies preliminary steps... determination to close the Auburn post office in Auburn, West Virginia. The petition for review was filed by...

76 FR 62468 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-99; Order No. 892] Post Office Closing AGENCY... the closing of the Ingleside, Maryland post office has been filed. It identifies preliminary steps and... determination to close the Ingleside post office in Ingleside, Maryland. The petition for review was filed by...

76 FR 62465 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-93; Order No. 886] Post Office Closing AGENCY... the closing of the Freedom, Wyoming post office has been filed. It identifies preliminary steps and... determination to close the Freedom post office in Freedom, Wyoming. The first petition for review was filed by...

76 FR 45301 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-28

... POSTAL REGULATORY COMMISSION [Docket No. A2011-25; Order No. 767] Post Office Closing AGENCY... the closing of the Unionville, Iowa post office has been filed. It identifies preliminary steps and... closing of the post office in Unionville, Iowa. The petition, which was filed by Dorothy Jean Smith...

76 FR 49801 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-11

... POSTAL REGULATORY COMMISSION [Docket No. A2011-40; Order No. 794] Post Office Closing AGENCY... the closing of the Monroe, Arkansas post office has been filed. It identifies preliminary steps and... determination to close the post office in Monroe, Arkansas. The petition was filed by Martha Pineda (Petitioner...

76 FR 77028 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-75; Order No. 1019] Post Office Closing AGENCY... the closing of the Geuda Springs, Kansas post office has been filed. It identifies preliminary steps... determination to close the Geuda Springs post office in Geuda Springs, Kansas. The first petition for review...

76 FR 62462 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-96; Order No. 889] Post Office Closing AGENCY... the closing of the West Leyden, New York post office has been filed. It identifies preliminary steps... of the Postal Service's determination to close the West Leyden post office in West Leyden, New York...

76 FR 51435 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... POSTAL REGULATORY COMMISSION [Docket No. A2011-44; Order No. 800] Post Office Closing AGENCY... the closing of the Grant, Iowa post office has been filed. It identifies preliminary steps and... determination to close the post office in Grant, Iowa. The petition was filed by Laurenda Mifflin (Petitioner...

76 FR 58314 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... POSTAL REGULATORY COMMISSION [Docket No. A2011-68; Order No. 852] Post Office Closing AGENCY... the closing of the Board Camp, Arkansas post office has been filed. It identifies preliminary steps... determination to close the Board Camp post office in Board Camp, Arkansas. The petition was filed by the...

76 FR 60563 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... POSTAL REGULATORY COMMISSION [Docket No. A2011-79; Order No. 868] Post Office Closing AGENCY... the closing of the Algoma, Mississippi post office has been filed. It identifies preliminary steps and... determination to close the Algoma post office in Algoma, Mississippi. The petition was filed by Phyllis McGregor...

76 FR 58544 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... POSTAL REGULATORY COMMISSION [Docket No. A2011-71; Order No. 855] Post Office Closing AGENCY... the closing of the Latham, Missouri post office has been filed. It identifies preliminary steps and... determination to close the Latham post office in Latham, Missouri. The petition was filed by Deanna Cook on...

76 FR 77273 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

... POSTAL REGULATORY COMMISSION [Docket No. A2012-79; Order No. 1022] Post Office Closing AGENCY... the closing of the Burns, Colorado post office has been filed. It identifies preliminary steps and... determination to close the Burns post office in Burns, Colorado. The first petition for review received November...

77 FR 3807 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... POSTAL REGULATORY COMMISSION [Docket No. A2012-110; Order No. 1149] Post Office Closing AGENCY... the closing of the Badger, Iowa post office has been filed. It identifies preliminary steps and... for review of the Postal Service's determination to close the Badger post office in Badger, Iowa. The...

76 FR 64127 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... POSTAL REGULATORY COMMISSION [Docket No. A2012-1; Order No. 897] Post Office Closing AGENCY... the closing of the Basalt, Idaho post office has been filed. It identifies preliminary steps and... petitions for review of the Postal Service's determination to close the Basalt post office in Basalt, Idaho...

76 FR 71085 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... POSTAL REGULATORY COMMISSION [Docket No. A2012-44; Order No. 961] Post Office Closing AGENCY... the closing of the Deer Grove, Illinois post office has been filed. It identifies preliminary steps... for review of the Postal Service's determination to close the Deer Grove post office in Deer Grove...

76 FR 67771 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-27; Order No. 932] Post Office Closing AGENCY... the closing of the St. Olaf, Iowa post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the St. Olaf post office in St. Olaf, Iowa. The petition for...

76 FR 67772 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-26; Order No. 931] Post Office Closing AGENCY... the closing of the Lodi, Texas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Lodi post office in Lodi, Texas. The petition for review was...

76 FR 46857 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-03

... POSTAL REGULATORY COMMISSION [Docket No. A2011-33; Order No. 776] Post Office Closing AGENCY... the closing of the Still Pond, Maryland post office has been filed. It identifies preliminary steps... to close the post office in Still Pond, Maryland. The petition was filed by Craig O'Donnell...

76 FR 61403 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-04

... POSTAL REGULATORY COMMISSION [Docket No. A2011-86; Order No. 878] Post Office Closing AGENCY... the closing of the Redfield, New York post office has been filed. It identifies preliminary steps and... of the Postal Service's determination to close the Redfield post office in Redfield, New York. The...

76 FR 58546 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... POSTAL REGULATORY COMMISSION [Docket No. A2011-72; Order No. 856] Post Office Closing AGENCY... the closing of the Hailesboro, New York post office has been filed. It identifies preliminary steps... determination to close the Hailesboro post office in Hailesboro, New York. The petition was filed by Natalie J...

76 FR 64132 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... POSTAL REGULATORY COMMISSION [Docket No. A2012-6; Order No. 902] Post Office Closing AGENCY... the closing of the Saint Lucas, Iowa post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Saint Lucas post office in Saint Lucas, Iowa. The petition...

76 FR 75568 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... POSTAL REGULATORY COMMISSION [Docket No. A2012-59; Order No. 1000] Post Office Closing AGENCY... the closing of the New Cambria, Kansas post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the New Cambria post office in New Cambria, Kansas. The petition...

77 FR 3805 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... POSTAL REGULATORY COMMISSION [Docket No. A2012-109; Order No. 1148] Post Office Closing AGENCY... the closing of the Bovill, Idaho post office has been filed. It identifies preliminary steps and... petitions for review of the Postal Service's determination to close the Bovill post office in Bovill, Idaho...

77 FR 7213 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... POSTAL REGULATORY COMMISSION [Docket No. A2012-120; Order No. 1198] Post Office Closing AGENCY... the closing of the Santa Fe, Missouri post office has been filed. It identifies preliminary steps and... two petitions for review of the Postal Service's determination to close the Santa Fe post office in...

76 FR 72985 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... POSTAL REGULATORY COMMISSION [Docket No. A2012-53; Order No. 984] Post Office Closing AGENCY... the closing of the Witten, South Dakota post office has been filed. It identifies preliminary steps... determination to close the Witten post office in Witten, South Dakota. The first petition for review received...

76 FR 61758 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... POSTAL REGULATORY COMMISSION [Docket No. A2011-89; Order No. 881] Post Office Closing AGENCY... the closing of the Argyle, Florida post office has been filed. It identifies preliminary steps and... determination to close the Argyle post office in Argyle, Florida. The petition was filed by Blythe D. Gottleib...

76 FR 78318 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... POSTAL REGULATORY COMMISSION [Docket No. A2012-80; Order No. 1029] Post Office Closing AGENCY... the closing of the Harris, Iowa post office has been filed. It identifies preliminary steps and... received a petition for review of the Postal Service's determination to close the Harris post office in...

76 FR 70173 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... POSTAL REGULATORY COMMISSION [Docket No. A2012-41; Order No. 948] Post Office Closing AGENCY... the closing of the West Edmeston, New York post office has been filed. It identifies preliminary steps... Postal Service's determination to close the West Edmeston post office in West Edmeston, New York. The...

77 FR 3808 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... POSTAL REGULATORY COMMISSION [Docket No. A2012-107; Order No. 1146] Post Office Closing AGENCY... the closing of the Chilo, Ohio post office has been filed. It identifies preliminary steps and... review of the Postal Service's determination to close the Chilo post office in Chilo, Ohio. The petition...

Streamflow Bias Correction for Climate Change Impact Studies: Harmless Correction or Wrecking Ball?

NASA Astrophysics Data System (ADS)

Nijssen, B.; Chegwidden, O.

2017-12-01

Projections of the hydrologic impacts of climate change rely on a modeling chain that includes estimates of future greenhouse gas emissions, global climate models, and hydrologic models. The resulting streamflow time series are used in turn as input to impact studies. While these flows can sometimes be used directly in these impact studies, many applications require additional post-processing to remove model errors. Water resources models and regulation studies are a prime example of this type of application. These models rely on specific flows and reservoir levels to trigger reservoir releases and diversions and do not function well if the unregulated streamflow inputs are significantly biased in time and/or amount. This post-processing step is typically referred to as bias-correction, even though this step corrects not just the mean but the entire distribution of flows. Various quantile-mapping approaches have been developed that adjust the modeled flows to match a reference distribution for some historic period. Simulations of future flows are then post-processed using this same mapping to remove hydrologic model errors. These streamflow bias-correction methods have received far less scrutiny than the downscaling and bias-correction methods that are used for climate model output, mostly because they are less widely used. However, some of these methods introduce large artifacts in the resulting flow series, in some cases severely distorting the climate change signal that is present in future flows. In this presentation, we discuss our experience with streamflow bias-correction methods as part of a climate change impact study in the Columbia River basin in the Pacific Northwest region of the United States. To support this discussion, we present a novel way to assess whether a streamflow bias-correction method is merely a harmless correction or is more akin to taking a wrecking ball to the climate change signal.

A pelvic motion driven electrical stimulator for drop-foot treatment.

PubMed

Chen, Shih-Wei; Chen, Shih-Ching; Chen, Chiun-Fan; Lai, Jin-Shin; Kuo, Te-Son

2009-01-01

Foot switches operating with force sensitive resistors placed in the shoe sole were considered as an effective way for driving FES assisted walking systems in gait restoration. However, the reliability and durability of the foot switches run down after a certain number of steps. As an alternative for foot switches, a simple, portable, and easy to handle motion driven electrical stimulator (ES) is provided for drop foot treatment. The device is equipped with a single tri-axis accelerometer worn on the pelvis, a commercial dual channel electrical stimulator, and a controller unit. By monitoring the pelvic rotation and acceleration during a walking cycle, the events including heel strike and toe off of each step is thereby predicted by a post-processing neural network model.

Direct and continuous synthesis of VO2 nanoparticles

NASA Astrophysics Data System (ADS)

Powell, M. J.; Marchand, P.; Denis, C. J.; Bear, J. C.; Darr, J. A.; Parkin, I. P.

2015-11-01

Monoclinic VO2 nanoparticles are of interest due to the material's thermochromic properties, however, direct synthesis routes to VO2 nanoparticles are often inaccessible due to the high synthesis temperatures or long reaction times required. Herein, we present a two-step synthesis route for the preparation of monoclinic VO2 nanoparticles using Continuous Hydrothermal Flow Synthesis (CHFS) followed by a short post heat treatment step. A range of particle sizes, dependent on synthesis conditions, were produced from 50 to 200 nm by varying reaction temperatures and the residence times in the process. The nanoparticles were characterised by powder X-ray diffraction, Raman and UV/Vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The nanoparticles were highly crystalline with rod and sphere-like morphologies present in TEM micrographs, with the size of both the rod and spherical particles being highly dependent on both reaction temperature and residence time. SEM micrographs showed the surface of the powders produced from the CHFS process to be highly uniform. The samples were given a short post synthesis heat treatment to ensure that they were phase pure monoclinic VO2, which led to them exhibiting a large and reversible switch in optical properties (at near-IR wavelengths), which suggests that if such materials can be incorporated into coatings or in composites, they could be used for fenestration in architectural applications.

Direct and continuous synthesis of VO2 nanoparticles.

PubMed

Powell, M J; Marchand, P; Denis, C J; Bear, J C; Darr, J A; Parkin, I P

2015-11-28

Monoclinic VO2 nanoparticles are of interest due to the material's thermochromic properties, however, direct synthesis routes to VO2 nanoparticles are often inaccessible due to the high synthesis temperatures or long reaction times required. Herein, we present a two-step synthesis route for the preparation of monoclinic VO2 nanoparticles using Continuous Hydrothermal Flow Synthesis (CHFS) followed by a short post heat treatment step. A range of particle sizes, dependent on synthesis conditions, were produced from 50 to 200 nm by varying reaction temperatures and the residence times in the process. The nanoparticles were characterised by powder X-ray diffraction, Raman and UV/Vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The nanoparticles were highly crystalline with rod and sphere-like morphologies present in TEM micrographs, with the size of both the rod and spherical particles being highly dependent on both reaction temperature and residence time. SEM micrographs showed the surface of the powders produced from the CHFS process to be highly uniform. The samples were given a short post synthesis heat treatment to ensure that they were phase pure monoclinic VO2, which led to them exhibiting a large and reversible switch in optical properties (at near-IR wavelengths), which suggests that if such materials can be incorporated into coatings or in composites, they could be used for fenestration in architectural applications.

Vertical electrostatic actuator with extended digital range via tailored topology

NASA Astrophysics Data System (ADS)

Zhang, Yanhang; Dunn, Martin L.

2002-07-01

We describe the design, fabrication, and testing of an electrostatic vertical actuator that exhibits a range of motion that covers the entire initial gap between the actuator and substrate and provides controllable digital output motion. This is obtained by spatially tailoring the electrode arrangement and the stiffness characteristics of the microstructure to control the voltage-deflection characteristics. The concept is based on the electrostatic pull down of bimaterial beams, via a series of electrodes attached to the beams by flexures with tailored stiffness characteristics. The range of travel of the actuator is defined by the post-release deformed shape of the bilayer beams, and can be controlled by a post-release heat-treat process combined with a tailored actuator topology (material distribution and geometry, including spatial geometrical patterning of the individual layers of the bilayer beams). Not only does this allow an increase in the range of travel to cover the entire initial gap, but it also permits digital control of the tip of the actuator which can be designed to yield linear displacement - pull in step characteristics. We fabricated these actuators using the MUMPs surface micromachining process, and packaged them in-house. We measured, using an interferometric microscope, full field deformed shapes of the actuator at each pull in step. The measurements compare well with companion simulation results, both qualitatively and quantitatively.

CDC Kerala 1: Organization of clinical child development services (1987-2013).

PubMed

Nair, M K C; George, Babu; Nair, G S Harikumaran; Bhaskaran, Deepa; Leena, M L; Russell, Paul Swamidhas Sudhakar

2014-12-01

The main objective of establishing the Child Development Centre (CDC), Kerala for piloting comprehensive child adolescent development program in India, has been to understand the conceptualization, design and scaling up of a pro-active positive child development initiative, easily replicable all over India. The process of establishing the Child Development Centre (CDC) Kerala for research, clinical services, training and community extension services over the last 25 y, has been as follows; Step 1: Conceptualization--The life cycle approach to child development; Step 2: Research basis--CDC model early stimulation is effective; Step 3: Development and validation of seven simple developmental screening tools; Step 4: CDC Diagnostic services--Ultrasonology and genetic, and metabolic laboratory; Step 5: Developing seven intervention packages; Step 6: Training--Post graduate diploma in clinical child development; Step 7: CDC Clinic Services--seven major ones; Step 8: CDC Community Services--Child development referral units; Step 9: Community service delivery models--Childhood disability and for adolescent care counselling projects; Step 10: National capacity building--Four child development related courses. CDC Kerala follow-up and clinic services are offered till 18 y of age and premarital counselling till 24 y of age as shown in "CDC Kerala Clinic Services Flow Chart" and 74,291 children have availed CDC clinic services in the last 10 y. CDC Kerala is the first model for comprehensive child adolescent development services using a lifecycle approach in the Government sector and hence declared as the collaborative centre for Rashtriya Bal Swasthya Karyakram (RBSK), in Kerala.

Application of novel Modified Biological Aerated Filter (MBAF) as a promising post-treatment for water reuse: Modification in configuration and backwashing process.

PubMed

Nikoonahad, Ali; Ghaneian, Mohammad Taghi; Mahvi, Amir Hossein; Ehrampoush, Mohammad Hassan; Ebrahimi, Ali Asghar; Lotfi, Mohammad Hassan; Salamehnejad, Sima

2017-12-01

Biological Aerated Filter (BAF) reactors due to their plentiful biomass, high shockability, high efficiency, good filtration, availability and lack of need for large land areas, are enjoying from great importance in advanced wastewater treatment. Therefore, in this study, Polystyrene Coated by Sand (PCS) was produced as a novel media and its application in a modified down-flow BAF structure for advanced wastewater treatment was assessed in two steps. In step one, the backwash effluent did not return to the system, while in step two backwash effluent returned to increase the water reuse efficiency. The backwash process was also studied through three methods of Top Backwashing (TB), Bottom Backwashing (BB), as well as Top and Bottom Backwashing Simultaneously (TBBS). The results showed that return of backwash effluent had no significant effect on the BAF effluent quality. In the second step similar to the first one with slight differences, the residual average concentrations of TSS, BOD 5 , and COD at the effluent were about 2.5, 8.2, and 25.5 mg/L, respectively. Additionally, in step two, the mean volume of disposal sludge/volume of treated water (v ds /v tw ) decreased a large extent to about 0.088%. In other words, the water reuse has increased to more than 99.91%. The backwash time in methods of TB and BB were 65 and 35 min, respectively; however, it decreased in TBBS methods to 25 min. The concentrations of most effluent parameters in this system are in concordance with the 2012 EPA Agriculture Standards, even for irrigation of Non-processed agricultural crops and livestock water consumption. Copyright © 2017 Elsevier Ltd. All rights reserved.

76 FR 45625 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... POSTAL REGULATORY COMMISSION [Docket No. A2011-27; Order No. 769] Post Office Closing AGENCY... the closing of the Rodney, Iowa post office has been filed. It identifies preliminary steps and... to close the post office in Rodney, Iowa. The petition, which was filed by Zella Thomas, Mayor of the...

76 FR 60945 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

... POSTAL REGULATORY COMMISSION [Docket No. A2011-82; Order No. 872] Post Office Closing AGENCY... the closing of the Belk, Alabama post office has been filed. It identifies preliminary steps and... determination to close the Belk post office in Belk, Alabama. The petition was filed by Ronald Waldrop, Mayor on...

76 FR 47614 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-05

... POSTAL REGULATORY COMMISSION [Docket No. A2011-35; Order No. 786] Post Office Closing AGENCY... the closing of the Pilot Grove, Iowa post office has been filed. It identifies preliminary steps and... determination to close the post office in Pilot Grove, Iowa. The first petition was filed by Sylvan J. Nichting...

76 FR 59452 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... POSTAL REGULATORY COMMISSION [Docket No. A2011-75; Order No. 862] Post Office Closing AGENCY... the closing of the Ellisburg, New York post office has been filed. It identifies preliminary steps and... determination to close the Ellisburg post office in Ellisburg, New York. The petition was filed by Winford J...

76 FR 56822 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

... POSTAL REGULATORY COMMISSION [Docket No. A2011-60; Order No. 841] Post Office Closing AGENCY... the closing of the Gepp, Arkansas post office has been filed. It identifies preliminary steps and... determination to close the Gepp post office in Gepp, Arkansas. The petition was filed online by Kathy Adams on...

76 FR 62460 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-98; Order No. 891] Post Office Closing AGENCY... the closing of the La Grande, Washington post office has been filed. It identifies preliminary steps... determination to close the La Grande post office in La Grande, Washington. The petition for review was filed by...

76 FR 62461 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... POSTAL REGULATORY COMMISSION [Docket No. A2011-97; Order No. 890] Post Office Closing AGENCY... the closing of the Oak Hill, Alabama post office has been filed. It identifies preliminary steps and... determination to close the Oak Hill post office in Oak Hill, Alabama. The petition for review was filed by the...

76 FR 60949 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

... POSTAL REGULATORY COMMISSION [Docket No. A2011-83; Order No. 873] Post Office Closing AGENCY... the closing of the Climax, New York post office has been filed. It identifies preliminary steps and... determination to close the Climax post office in Climax, New York. The petition was filed by Sue Keeler...

76 FR 53159 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-25

... POSTAL REGULATORY COMMISSION [Docket No. A2011-48; Order No. 813] Post Office Closing AGENCY... the closing of the Ida, Arkansas post office has been filed. It identifies preliminary steps and... determination to close the post office in Ida, Arkansas. The petition was filed by Earlene Cannon on behalf of...

76 FR 51066 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... POSTAL REGULATORY COMMISSION [Docket No. A2011-42; Order No. 798] Post Office Closing AGENCY... the closing of the Rex, North Carolina post office has been filed. It identifies preliminary steps and... determination to close the post office in Rex, North Carolina. The petition was filed by James E. Shaw...

76 FR 51067 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... POSTAL REGULATORY COMMISSION [Docket No. A2011-43; Order No. 799] Post Office Closing AGENCY... the closing of the Stoy, Illinois post office has been filed. It identifies preliminary steps and... determination to close the post office in Stoy, Illinois. The petition was filed by Lisa L. McKinley (Petitioner...

76 FR 58545 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... POSTAL REGULATORY COMMISSION [Docket No. A2011-70; Order No. 854] Post Office Closing AGENCY... the closing of the Woodgate, New York post office has been filed. It identifies preliminary steps and... determination to close the Woodgate post office in Woodgate, New York. The petition was filed by the Woodgate...

77 FR 4380 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

... POSTAL REGULATORY COMMISSION [Docket No. A2012-114; Order No. 1157] Post Office Closing AGENCY... the closing of the Ponce de Leon, Missouri post office has been filed. It identifies preliminary steps... petition for review of the Postal Service's determination to close the Ponce de Leon Post Office in Ponce...

77 FR 1750 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... POSTAL REGULATORY COMMISSION [Docket No. A2012-99; Order No. 1100] Post Office Closing AGENCY... the closing of the Elk River, Idaho post office has been filed. It identifies preliminary steps and... review of the Postal Service's determination to close the Elk River post office in Elk River, Idaho. The...

76 FR 73744 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... POSTAL REGULATORY COMMISSION [Docket No. A2012-57; Order No. 991] Post Office Closing AGENCY... the closing of the Port Kent, New York post office has been filed. It identifies preliminary steps and... Postal Service's determination to close the Port Kent post office in Port Kent, New York. The petition...

75 FR 4429 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

... POSTAL REGULATORY COMMISSION [Docket No. A2010-2; Order No. 395] Post Office Closing AGENCY... the closing of the Sundance, CO, post office has been filed. It identifies preliminary steps and... to 39 U.S.C. 404(d), the Commission has received an appeal of the closing of the Sundance post office...

Modelling energy efficiency of an integrated anaerobic digestion and photodegradation of distillery effluent using response surface methodology.

PubMed

Apollo, Seth; Onyango, Maurice S; Ochieng, Aoyi

2016-10-01

Anaerobic digestion (AD) is efficient in organic load removal and bioenergy recovery when applied in treating distillery effluent; however, it is ineffective in colour reduction. In contrast, ultraviolet (UV) photodegradation post-treatment for the AD-treated distillery effluent is effective in colour reduction but has high energy requirement. The effects of operating parameters on bioenergy production and energy demand of photodegradation were modelled using response surface methodology (RSM) with a view of developing a sustainable process in which the biological step could supply energy to the energy-intensive photodegradation step. The organic loading rate (OLRAD) and hydraulic retention time (HRTAD) of the initial biological step were the variables investigated. It was found that the initial biological step removed about 90% of COD and only about 50% colour while photodegradation post-treatment removed 98% of the remaining colour. Maximum bioenergy production of 180.5 kWh/m(3) was achieved. Energy demand of the UV lamp was lowest at low OLRAD irrespective of HRTAD, with values ranging between 87 and 496 kWh/m(3). The bioenergy produced formed 93% of the UV lamp energy demand when the system was operated at OLRAD of 3 kg COD/m(3) d and HRT of 20 days. The presumed carbon dioxide emission reduction when electricity from bioenergy was used to power the UV lamp was 28.8 kg CO2 e/m(3), which could reduce carbon emission by 31% compared to when electricity from the grid was used, leading to environmental conservation.

Specific detection of the cleavage activity of mycobacterial enzymes using a quantum dot based DNA nanosensor

NASA Astrophysics Data System (ADS)

Jepsen, Morten Leth; Harmsen, Charlotte; Godbole, Adwait Anand; Nagaraja, Valakunja; Knudsen, Birgitta R.; Ho, Yi-Ping

2015-12-01

We present a quantum dot based DNA nanosensor specifically targeting the cleavage step in the reaction cycle of the essential DNA-modifying enzyme, mycobacterial topoisomerase I. The design takes advantages of the unique photophysical properties of quantum dots to generate visible fluorescence recovery upon specific cleavage by mycobacterial topoisomerase I. This report, for the first time, demonstrates the possibility to quantify the cleavage activity of the mycobacterial enzyme without the pre-processing sample purification or post-processing signal amplification. The cleavage induced signal response has also proven reliable in biological matrices, such as whole cell extracts prepared from Escherichia coli and human Caco-2 cells. It is expected that the assay may contribute to the clinical diagnostics of bacterial diseases, as well as the evaluation of treatment outcomes.We present a quantum dot based DNA nanosensor specifically targeting the cleavage step in the reaction cycle of the essential DNA-modifying enzyme, mycobacterial topoisomerase I. The design takes advantages of the unique photophysical properties of quantum dots to generate visible fluorescence recovery upon specific cleavage by mycobacterial topoisomerase I. This report, for the first time, demonstrates the possibility to quantify the cleavage activity of the mycobacterial enzyme without the pre-processing sample purification or post-processing signal amplification. The cleavage induced signal response has also proven reliable in biological matrices, such as whole cell extracts prepared from Escherichia coli and human Caco-2 cells. It is expected that the assay may contribute to the clinical diagnostics of bacterial diseases, as well as the evaluation of treatment outcomes. Electronic supplementary information (ESI) available: Characterization of the QD-based DNA Nanosensor. See DOI: 10.1039/c5nr06326d

Considerations for fine hole patterning for the 7nm node

NASA Astrophysics Data System (ADS)

Yaegashi, Hidetami; Oyama, Kenichi; Hara, Arisa; Natori, Sakurako; Yamauchi, Shohei; Yamato, Masatoshi; Koike, Kyohei

2016-03-01

One of the practical candidates to produce 7nm node logic devices is to use the multiple patterning with 193-immersion exposure. For the multiple patterning, it is important to evaluate the relation between the number of mask layer and the minimum pitch systematically to judge the device manufacturability. Although the number of the time of patterning, namely LE(Litho-Etch) ^ x-time, and overlay steps have to be reduced, there are some challenges in miniaturization of hole size below 20nm. Various process fluctuations on contact hole have a direct impact on device performance. According to the technical trend, 12nm diameter hole on 30nm-pitch hole will be needed on 7nm node. Extreme ultraviolet lithography (EUV) and Directed self-assembly (DSA) are attracting considerable attention to obtain small feature size pattern, however, 193-immersion still has the potential to extend optical lithography cost-effectively for sub-7nm node. The objective of this work is to study the process variation challenges and resolution in post-processing for the CD-bias control to meet sub-20nm diameter contact hole. Another pattern modulation is also demonstrated during post-processing step for hole shrink. With the realization that pattern fidelity and pattern placement management will limit scaling long before devices and interconnects fail to perform intrinsically, the talk will also outline how circle edge roughness (CER) and Local-CD uniformity can correct efficiency. On the other hand, 1D Gridded-Design-Rules layout (1D layout) has simple rectangular shapes. Also, we have demonstrated CD-bias modification on short trench pattern to cut grating line for its fabrication.

Older adults prioritize postural stability in the anterior-posterior direction to regain balance following volitional lateral step.

PubMed

Porter, Shaun; Nantel, Julie

2015-02-01

Postural control in the medial-lateral (ML) direction is of particular interest regarding the assessment of changes in postural control, as it is highly related to the risk of falling. To determine the postural strategies used to regain balance following a voluntary lateral step and compare these strategies between young and older adults. Sixteen older adults (60-90 years) and 14 young adults (20-40 years) were asked to stand quietly for 30s, walk in place and then take a lateral step and stand quietly (30s). Balance Post was divided into 10s intervals. Center of pressure displacement (CoP) and velocity (VCoP) in the anterio-posterior (AP) and ML directions were analyzed. In both groups, CoP and VCoP in AP and ML increased in Post1 compared to Pre (P<0.001). Dissimilar to young adults, VCoP-Post2, Post3 ML were larger than Pre (P=0.01) in older adults. Age correlated with all VCoP (Pre and Post) in both ML (P<0.05) and AP directions (P<0.01). Dissimilar to young adults, older adults use different postural strategies in ML and AP directions and prioritized postural stability in the AP direction to recover balance after completing a lateral step. In the ML direction, older adults took up to 30s to regain balance. Considering that age was related to larger CoP displacement and velocity, the AP strategy to recover postural balance following a lateral step could become less efficient as older adults age and therefore increasing the risk of falls. Copyright © 2015 Elsevier B.V. All rights reserved.

Transfer effects of step training on stepping performance in untrained directions in older adults: A randomized controlled trial.

PubMed

Okubo, Yoshiro; Menant, Jasmine; Udyavar, Manasa; Brodie, Matthew A; Barry, Benjamin K; Lord, Stephen R; L Sturnieks, Daina

2017-05-01

Although step training improves the ability of quick stepping, some home-based step training systems train limited stepping directions and may cause harm by reducing stepping performance in untrained directions. This study examines the possible transfer effects of step training on stepping performance in untrained directions in older people. Fifty four older adults were randomized into: forward step training (FT); lateral plus forward step training (FLT); or no training (NT) groups. FT and FLT participants undertook a 15-min training session involving 200 step repetitions. Prior to and post training, choice stepping reaction time and stepping kinematics in untrained, diagonal and lateral directions were assessed. Significant interactions of group and time (pre/post-assessment) were evident for the first step after training indicating negative (delayed response time) and positive (faster peak stepping speed) transfer effects in the diagonal direction in the FT group. However, when the second to the fifth steps after training were included in the analysis, there were no significant interactions of group and time for measures in the diagonal stepping direction. Step training only in the forward direction improved stepping speed but may acutely slow response times in the untrained diagonal direction. However, this acute effect appears to dissipate after a few repeated step trials. Step training in both forward and lateral directions appears to induce no negative transfer effects in diagonal stepping. These findings suggest home-based step training systems present low risk of harm through negative transfer effects in untrained stepping directions. ANZCTR 369066. Copyright © 2017 Elsevier B.V. All rights reserved.

A WorkFlow Engine Oriented Modeling System for Hydrologic Sciences

NASA Astrophysics Data System (ADS)

Lu, B.; Piasecki, M.

2009-12-01

In recent years the use of workflow engines for carrying out modeling and data analyses tasks has gained increased attention in the science and engineering communities. Tasks like processing raw data coming from sensors and passing these raw data streams to filters for QA/QC procedures possibly require multiple and complicated steps that need to be repeated over and over again. A workflow sequence that carries out a number of steps of various complexity is an ideal approach to deal with these tasks because the sequence can be stored, called up and repeated over again and again. This has several advantages: for one it ensures repeatability of processing steps and with that provenance, an issue that is increasingly important in the science and engineering communities. It also permits the hand off of lengthy and time consuming tasks that can be error prone to a chain of processing actions that are carried out automatically thus reducing the chance for error on the one side and freeing up time to carry out other tasks on the other hand. This paper aims to present the development of a workflow engine embedded modeling system which allows to build up working sequences for carrying out numerical modeling tasks regarding to hydrologic science. Trident, which facilitates creating, running and sharing scientific data analysis workflows, is taken as the central working engine of the modeling system. Current existing functionalities of the modeling system involve digital watershed processing, online data retrieval, hydrologic simulation and post-event analysis. They are stored as sequences or modules respectively. The sequences can be invoked to implement their preset tasks in orders, for example, triangulating a watershed from raw DEM. Whereas the modules encapsulated certain functions can be selected and connected through a GUI workboard to form sequences. This modeling system is demonstrated by setting up a new sequence for simulating rainfall-runoff processes which involves embedded Penn State Integrated Hydrologic Model(PIHM) module for hydrologic simulation as a kernel, DEM processing sub-sequence which prepares geospatial data for PIHM, data retrieval module which access time series data from online data repository via web services or from local database, post- data management module which stores , visualizes and analyzes model outputs.

A Geometry Based Infra-structure for Computational Analysis and Design

NASA Technical Reports Server (NTRS)

Haimes, Robert

1997-01-01

The computational steps traditionally taken for most engineering analysis (CFD, structural analysis, and etc.) are: Surface Generation - usually by employing a CAD system; Grid Generation - preparing the volume for the simulation; Flow Solver - producing the results at the specified operational point; and Post-processing Visualization - interactively attempting to understand the results For structural analysis, integrated systems can be obtained from a number of commercial vendors. For CFD, these steps have worked well in the past for simple steady-state simulations at the expense of much user interaction. The data was transmitted between phases via files. Specifically the problems with this procedure are: (1) File based. Information flows from one step to the next via data files with formats specified for that procedure. (2) 'Good' Geometry. A bottleneck in getting results from a solver is the construction of proper geometry to be fed to the grid generator. With 'good' geometry a grid can be constructed in tens of minutes (even with a complex configuration) using unstructured techniques. (3) One-Way communication. All information travels on from one phase to the next. Until this process can be automated, more complex problems such as multi-disciplinary analysis or using the above procedure for design becomes prohibitive.

Mechanism of protein splicing of the Pyrococcus abyssi lon protease intein

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Brien, Kevin M.; Schufreider, Ann K.; McGill, Melissa A.

2010-12-17

Research highlights: {yields} The Pyrococcus abyssi lon protease intein promotes efficient protein splicing. {yields} Inteins with mutations that interfere with individual steps of splicing do not promote unproductive side reactions. {yields} The intein splices with Lys in place of the highly conserved penultimate His. {yields} The intein is flanked by a Gly-rich region at its C terminus that may increase the efficiency of the third step of splicing, Asn cyclization coupled to peptide bond cleavage. -- Abstract: Protein splicing is a post-translational process by which an intervening polypeptide, the intein, excises itself from the flanking polypeptides, the exteins, coupled tomore » ligation of the exteins. The lon protease of Pyrococcus abyssi (Pab) is interrupted by an intein. When over-expressed as a fusion protein in Escherichia coli, the Pab lon protease intein can promote efficient protein splicing. Mutations that block individual steps of splicing generally do not lead to unproductive side reactions, suggesting that the intein tightly coordinates the splicing process. The intein can splice, although it has Lys in place of the highly conserved penultimate His, and mutants of the intein in the C-terminal region lead to the accumulation of stable branched-ester intermediate.« less

Intervention-related increases in preoperative physical activity are maintained 6-months after Bariatric surgery: results from the bari-active trial.

PubMed

Bond, D S; Thomas, J G; Vithiananthan, S; Unick, J; Webster, J; Roye, G D; Ryder, B A; Sax, H C

2017-03-01

Higher preoperative physical activity (PA) strongly predicts higher post-operative PA in bariatric surgery (BS) patients, providing rationale for preoperative PA interventions (PAIs). However, whether PAI-related increases can be maintained post-operatively has not been examined. This study compared PA changes across pre- (baseline, post-intervention) and post-operative (6-month follow up) periods in participants randomized to 6 weeks of preoperative PAI or standard care control (SC). Of 75 participants initially randomized, 36 (PAI n=22; SC n=14) underwent BS. Changes in daily bout-related (⩾10-min bouts) moderate-to-vigorous PA (MVPA) and steps were assessed via the SenseWear Armband monitor. PAI received weekly counseling to increase walking exercise. Retention (86%) at post-operative follow up was similar between groups. Intent-to-treat analyses showed that PAI vs SC had greater increases across time (baseline, post-intervention, follow up) in bout-related MVPA minutes/day (4.3±5.1, 26.3±21.3, 28.7±26.3 vs 10.4±22.9, 11.4±16.0, 18.5±28.2; P=0.013) and steps/day (5163±2901, 7950±3286, 7870±3936 vs 5163±2901, 5601±3368, 5087±2603; P<0.001). PAI differed from SC on bout-related MVPA at post-intervention (P=0.016; d=0.91), but not follow up (P=0.15; d=0.41), and steps at post-intervention (P=0.031; d=0.78) and follow up (P=0.024; d=0.84). PAI participants maintained preoperative PA increases post-operatively. Findings support preoperative PAIs and research to test whether PA changes can be sustained and influence surgical outcomes beyond the initial post-operative period.

Sr and Mg Isotopes of post-glacial limestones: implications for the chemical evolution of the Neoproterozoic Ocean after snowball earth

NASA Astrophysics Data System (ADS)

Liu, C.; Wang, Z.; Macdonald, F. A.

2013-12-01

The variation of ocean chemistry after the Marinoan (~635Ma) glaciation reflects the integrated effect of changes in continental weathering, carbonate precipitation and hydrothermal process in response to the extreme climatic event. To reconstruct the contemporary seawater chemistry, we analyzed Sr and Mg isotopes of the post-glacial carbonate overlying cap dolostones in the basal Ediacaran Ol Formation of the Tsagaan Olom Group in southwestern Mongolia. We employed an incremental leaching technique by dissolving carbonates sequentially with ammonium acetate and increasing concentrations of acetic acid to separate metals from various mineral phases in the carbonate (including surface adsorbed phases, calcite and dolomite). The leachates from each step and the dissolved bulk samples passed through chromatographic columns to extract pure Mg and Sr, which were then analyzed for their isotopic compositions by MC-ICP-MS (Neptune) at Yale University. Elemental ratios (Mg/Ca and Sr/(Mg+Ca)) in each leaching steps were measured as well. The following observations were noted from these experiments. First, the Mg/Ca ratio of the leachate decreased in the first few steps, reached a plateau in the middle steps and increased in the last few steps, implying a leaching sequence of surface-adsorbed phases, calcite and dolomite. Second, the Sr/(Mg+Ca) ratios remain almost constant except in the first two steps, suggesting similar Sr concentrations in different carbonates but elevated values in surface-adsorbed phases. Third, variations of both δ26MgDSM3 and 87Sr/86Sr values of the leachates with leaching steps exhibit similar trends to Mg/Ca, indicating enrichment of 26Mg and 87Sr in dolomite. Fourth, 87Sr/86Sr values of the leachates exhibit a wider plateau than δ26MgDSM3, denoting a binary mixing of dissolved calcite and dolomite in the last few steps. Finally, higher 87Sr/86Sr ratios and δ26MgDSM3 values were observed for bulk samples than their calcite components. The 87Sr/86Sr values of the plateau steps in each sample vary from 0.7075 to 0.7087, with the lowest values close to the proposed post-glacial seawater values. The δ26MgDSM3 of the plateau steps in samples preserving seawater 87Sr/86Sr values increase from -3.0‰ in the basal part to -2.7‰ in upper sections, which could be explained by the following possibilities: 1) seawater δ26MgDSM3 values increased by ~0.3‰ due to enhanced silicate weathering after deglaciation; 2) the increase was due to a temperature increase of ~20°C; 3) Mg isotopes of the samples in upper sections were less effected by the transformation of aragonite into calcite during diagenesis; or 4) a larger proportion of the carbonates in upper sections were originally precipitated as aragonite.

Automatic Coregistration and orthorectification (ACRO) and subsequent mosaicing of NASA high-resolution imagery over the Mars MC11 quadrangle, using HRSC as a baseline

NASA Astrophysics Data System (ADS)

Sidiropoulos, Panagiotis; Muller, Jan-Peter; Watson, Gillian; Michael, Gregory; Walter, Sebastian

2018-02-01

This work presents the coregistered, orthorectified and mosaiced high-resolution products of the MC11 quadrangle of Mars, which have been processed using novel, fully automatic, techniques. We discuss the development of a pipeline that achieves fully automatic and parameter independent geometric alignment of high-resolution planetary images, starting from raw input images in NASA PDS format and following all required steps to produce a coregistered geotiff image, a corresponding footprint and useful metadata. Additionally, we describe the development of a radiometric calibration technique that post-processes coregistered images to make them radiometrically consistent. Finally, we present a batch-mode application of the developed techniques over the MC11 quadrangle to validate their potential, as well as to generate end products, which are released to the planetary science community, thus assisting in the analysis of Mars static and dynamic features. This case study is a step towards the full automation of signal processing tasks that are essential to increase the usability of planetary data, but currently, require the extensive use of human resources.

Catalyst Interface Engineering for Improved 2D Film Lift-Off and Transfer

PubMed Central

2016-01-01

The mechanisms by which chemical vapor deposited (CVD) graphene and hexagonal boron nitride (h-BN) films can be released from a growth catalyst, such as widely used copper (Cu) foil, are systematically explored as a basis for an improved lift-off transfer. We show how intercalation processes allow the local Cu oxidation at the interface followed by selective oxide dissolution, which gently releases the 2D material (2DM) film. Interfacial composition change and selective dissolution can thereby be achieved in a single step or split into two individual process steps. We demonstrate that this method is not only highly versatile but also yields graphene and h-BN films of high quality regarding surface contamination, layer coherence, defects, and electronic properties, without requiring additional post-transfer annealing. We highlight how such transfers rely on targeted corrosion at the catalyst interface and discuss this in context of the wider CVD growth and 2DM transfer literature, thereby fostering an improved general understanding of widely used transfer processes, which is essential to numerous other applications. PMID:27934130

From bird to sparrow: Learning-induced modulations in fine-grained semantic discrimination.

PubMed

De Meo, Rosanna; Bourquin, Nathalie M-P; Knebel, Jean-François; Murray, Micah M; Clarke, Stephanie

2015-09-01

Recognition of environmental sounds is believed to proceed through discrimination steps from broad to more narrow categories. Very little is known about the neural processes that underlie fine-grained discrimination within narrow categories or about their plasticity in relation to newly acquired expertise. We investigated how the cortical representation of birdsongs is modulated by brief training to recognize individual species. During a 60-minute session, participants learned to recognize a set of birdsongs; they improved significantly their performance for trained (T) but not control species (C), which were counterbalanced across participants. Auditory evoked potentials (AEPs) were recorded during pre- and post-training sessions. Pre vs. post changes in AEPs were significantly different between T and C i) at 206-232ms post stimulus onset within a cluster on the anterior part of the left superior temporal gyrus; ii) at 246-291ms in the left middle frontal gyrus; and iii) 512-545ms in the left middle temporal gyrus as well as bilaterally in the cingulate cortex. All effects were driven by weaker activity for T than C species. Thus, expertise in discriminating T species modulated early stages of semantic processing, during and immediately after the time window that sustains the discrimination between human vs. animal vocalizations. Moreover, the training-induced plasticity is reflected by the sharpening of a left lateralized semantic network, including the anterior part of the temporal convexity and the frontal cortex. Training to identify birdsongs influenced, however, also the processing of C species, but at a much later stage. Correct discrimination of untrained sounds seems to require an additional step which results from lower-level features analysis such as apperception. We therefore suggest that the access to objects within an auditory semantic category is different and depends on subject's level of expertise. More specifically, correct intra-categorical auditory discrimination for untrained items follows the temporal hierarchy and transpires in a late stage of semantic processing. On the other hand, correct categorization of individually trained stimuli occurs earlier, during a period contemporaneous with human vs. animal vocalization discrimination, and involves a parallel semantic pathway requiring expertise. Copyright © 2015 Elsevier Inc. All rights reserved.

Neural Network Modeling for Gallium Arsenide IC Fabrication Process and Device Characteristics.

NASA Astrophysics Data System (ADS)

Creech, Gregory Lee, I.

This dissertation presents research focused on the utilization of neurocomputing technology to achieve enhanced yield and effective yield prediction in integrated circuit (IC) manufacturing. Artificial neural networks are employed to model complex relationships between material and device characteristics at critical stages of the semiconductor fabrication process. Whole wafer testing was performed on the starting substrate material and during wafer processing at four critical steps: Ohmic or Post-Contact, Post-Recess, Post-Gate and Final, i.e., at completion of fabrication. Measurements taken and subsequently used in modeling include, among others, doping concentrations, layer thicknesses, planar geometries, layer-to-layer alignments, resistivities, device voltages, and currents. The neural network architecture used in this research is the multilayer perceptron neural network (MLPNN). The MLPNN is trained in the supervised mode using the generalized delta learning rule. It has one hidden layer and uses continuous perceptrons. The research focuses on a number of different aspects. First is the development of inter-process stage models. Intermediate process stage models are created in a progressive fashion. Measurements of material and process/device characteristics taken at a specific processing stage and any previous stages are used as input to the model of the next processing stage characteristics. As the wafer moves through the fabrication process, measurements taken at all previous processing stages are used as input to each subsequent process stage model. Secondly, the development of neural network models for the estimation of IC parametric yield is demonstrated. Measurements of material and/or device characteristics taken at earlier fabrication stages are used to develop models of the final DC parameters. These characteristics are computed with the developed models and compared to acceptance windows to estimate the parametric yield. A sensitivity analysis is performed on the models developed during this yield estimation effort. This is accomplished by analyzing the total disturbance of network outputs due to perturbed inputs. When an input characteristic bears no, or little, statistical or deterministic relationship to the output characteristics, it can be removed as an input. Finally, neural network models are developed in the inverse direction. Characteristics measured after the final processing step are used as the input to model critical in-process characteristics. The modeled characteristics are used for whole wafer mapping and its statistical characterization. It is shown that this characterization can be accomplished with minimal in-process testing. The concepts and methodologies used in the development of the neural network models are presented. The modeling results are provided and compared to the actual measured values of each characteristic. An in-depth discussion of these results and ideas for future research are presented.

Frequency analysis of a step dynamic pressure calibrator.

PubMed

Choi, In-Mook; Yang, Inseok; Yang, Tae-Heon

2012-09-01

A dynamic high pressure standard is becoming more essential in the fields of mobile engines, space science, and especially the area of defense such as long-range missile development. However, a complication arises when a dynamic high pressure sensor is compared with a reference dynamic pressure gauge calibrated in static mode. Also, it is difficult to determine a reference dynamic pressure signal from the calibrator because a dynamic high pressure calibrator generates unnecessary oscillations in a positive-going pressure step method. A dynamic high pressure calibrator, using a quick-opening ball valve, generates a fast step pressure change within 1 ms; however, the calibrator also generates a big impulse force that can lead to a short life-time of the system and to oscillating characteristics in response to the dynamic sensor to be calibrated. In this paper, unnecessary additional resonant frequencies besides those of the step function are characterized using frequency analysis. Accordingly, the main sources of resonance are described. In order to remove unnecessary frequencies, the post processing results, obtained by a filter, are given; also, a method for the modification of the dynamic calibration system is proposed.

Frequency analysis of a step dynamic pressure calibrator

NASA Astrophysics Data System (ADS)

Choi, In-Mook; Yang, Inseok; Yang, Tae-Heon

2012-09-01

A dynamic high pressure standard is becoming more essential in the fields of mobile engines, space science, and especially the area of defense such as long-range missile development. However, a complication arises when a dynamic high pressure sensor is compared with a reference dynamic pressure gauge calibrated in static mode. Also, it is difficult to determine a reference dynamic pressure signal from the calibrator because a dynamic high pressure calibrator generates unnecessary oscillations in a positive-going pressure step method. A dynamic high pressure calibrator, using a quick-opening ball valve, generates a fast step pressure change within 1 ms; however, the calibrator also generates a big impulse force that can lead to a short life-time of the system and to oscillating characteristics in response to the dynamic sensor to be calibrated. In this paper, unnecessary additional resonant frequencies besides those of the step function are characterized using frequency analysis. Accordingly, the main sources of resonance are described. In order to remove unnecessary frequencies, the post processing results, obtained by a filter, are given; also, a method for the modification of the dynamic calibration system is proposed.

Promoting clinical and laboratory interaction by harmonization.

PubMed

Plebani, Mario; Panteghini, Mauro

2014-05-15

The lack of interchangeable results in current practice among clinical laboratories has underpinned greater attention to standardization and harmonization projects. Although the focus was mainly on the standardization and harmonization of measurement procedures and their results, the scope of harmonization goes beyond method and analytical results: it includes all other aspects of laboratory testing, including terminology and units, report formats, reference limits and decision thresholds, as well as test profiles and criteria for the interpretation of results. In particular, as evidence collected in last decades demonstrates that pre-pre- and post-post-analytical steps are more vulnerable to errors, harmonization initiatives should be performed to improve procedures and processes at the laboratory-clinical interface. Managing upstream demand, down-stream interpretation of laboratory results, and subsequent appropriate action through close relationships between laboratorians and clinicians remains a crucial issue of the laboratory testing process. Therefore, initiatives to improve test demand management from one hand and to harmonize procedures to improve physicians' acknowledgment of laboratory data and their interpretation from the other hand are needed in order to assure quality and safety in the total testing process. © 2013.

Effects of two-step homogenization on precipitation behavior of Al{sub 3}Zr dispersoids and recrystallization resistance in 7150 aluminum alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Zhanying; Key Laboratory for Anisotropy and Texture of Materials, Northeastern University, Shenyang 110819, China,; Zhao, Gang

2015-04-15

The effect of two-step homogenization treatments on the precipitation behavior of Al{sub 3}Zr dispersoids was investigated by transmission electron microscopy (TEM) in 7150 alloys. Two-step treatments with the first step in the temperature range of 300–400 °C followed by the second step at 470 °C were applied during homogenization. Compared with the conventional one-step homogenization, both a finer particle size and a higher number density of Al{sub 3}Zr dispersoids were obtained with two-step homogenization treatments. The most effective dispersoid distribution was attained using the first step held at 300 °C. In addition, the two-step homogenization minimized the precipitate free zonesmore » and greatly increased the number density of dispersoids near dendrite grain boundaries. The effect of two-step homogenization on recrystallization resistance of 7150 alloys with different Zr contents was quantitatively analyzed using the electron backscattered diffraction (EBSD) technique. It was found that the improved dispersoid distribution through the two-step treatment can effectively inhibit the recrystallization process during the post-deformation annealing for 7150 alloys containing 0.04–0.09 wt.% Zr, resulting in a remarkable reduction of the volume fraction and grain size of recrystallization grains. - Highlights: • Effect of two-step homogenization on Al{sub 3}Zr dispersoids was investigated by TEM. • Finer and higher number of dispersoids obtained with two-step homogenization • Minimized the precipitate free zones and improved the dispersoid distribution • Recrystallization resistance with varying Zr content was quantified by EBSD. • Effectively inhibit the recrystallization through two-step treatments in 7150 alloy.« less

Microwave-assisted routes for rapid and efficient modification of layered perovskites.

PubMed

Akbarian-Tefaghi, S; Wiley, J B

2018-02-27

Recent advances in exploiting microwave radiation in the topochemical modification of layered oxide perovskites are presented. Such methods work well for rapid bulk synthetic steps used in the production of novel inorganic-organic hybrids (protonation, grafting, intercalation, and in situ click reactions), exfoliation to produce dispersed nanosheets, and post-exfoliation processing to rapidly vary nanosheet surface groups. Compared to traditional methods that often take days, microwave methods can produce quality products in as little as 1-2 h.

Hydrogen peroxide modified sodium titanates with improved sorption capabilities

DOEpatents

Nyman, May D [Albuquerque, NM; Hobbs, David T [North Augusta, SC

2009-02-24

The sorption capabilities (e.g., kinetics, selectivity, capacity) of the baseline monosodium titanate (MST) sorbent material currently being used to sequester Sr-90 and alpha-emitting radioisotopes at the Savannah River Site are significantly improved when treated with hydrogen peroxide; either during the original synthesis of MST, or, as a post-treatment step after the MST has been synthesized. It is expected that these peroxide-modified MST sorbent materials will have significantly improved sorption capabilities for non-radioactive cations found in industrial processes and waste streams.

Study protocol: Community Links to Establish Alcohol Recovery (CLEAR) for women leaving jail.

PubMed

Johnson, Jennifer E; Schonbrun, Yael Chatav; Anderson, Bradley; Kurth, Megan; Timko, Christine; Stein, Michael

2017-04-01

This article describes the protocol for a randomized effectiveness trial of a method to link alcohol use disordered women who are in pretrial jail detention with post-release 12-step mutual help groups. Jails serve 15 times more people per year than do prisons and have very short stays, posing few opportunities for treatment or treatment planning. Alcohol use is associated with poor post-jail psychosocial and health outcomes including sexually transmitted diseases and HIV, especially for women. At least weekly 12-step self-help group attendance in the months after release from jail has been associated with improvements in alcohol use and alcohol-related consequences. Linkage strategies improve 12-step attendance and alcohol outcomes among outpatients, but have not previously been tested in criminal justice populations. In the intervention condition, a 12-step volunteer meets once individually with an incarcerated woman while she is in jail and arranges to be in contact after release to accompany her to 12-step meetings. The control condition provides schedules for local 12-step meetings. Outcomes include percent days abstinent from alcohol (primary), 12-step meeting involvement, and fewer unprotected sexual occasions (secondary) after release from jail. We hypothesize that (Minton, 2015) 12-step involvement will mediate the intervention's effect on alcohol use, and (O'Brien, 2001) percent days abstinent will mediate the intervention's effect on STI/HIV risk-taking outcomes. Research methods accommodate logistical and philosophical hurdles including rapid turnover of commitments and unpredictable release times at the jail, possible post-randomization ineligibility due to sentencing, 12-step principles such as Nonaffiliation, and use of volunteers as interventionists. Copyright © 2017 Elsevier Inc. All rights reserved.

Upscaling high-quality CVD graphene devices to 100 micron-scale and beyond

NASA Astrophysics Data System (ADS)

Lyon, Timothy J.; Sichau, Jonas; Dorn, August; Zurutuza, Amaia; Pesquera, Amaia; Centeno, Alba; Blick, Robert H.

2017-03-01

We describe a method for transferring ultra large-scale chemical vapor deposition-grown graphene sheets. These samples can be fabricated as large as several cm2 and are characterized by magneto-transport measurements on SiO2 substrates. The process we have developed is highly effective and limits damage to the graphene all the way through metal liftoff, as shown in carrier mobility measurements and the observation of the quantum Hall effect. The charge-neutral point is shown to move drastically to near-zero gate voltage after a 2-step post-fabrication annealing process, which also allows for greatly diminished hysteresis.

Do Gravity-Related Sensory Information Enable the Enhancement of Cortical Proprioceptive Inputs When Planning a Step in Microgravity?

PubMed Central

Saradjian, Anahid H.; Paleressompoulle, Dany; Louber, Didier; Coyle, Thelma; Blouin, Jean; Mouchnino, Laurence

2014-01-01

We recently found that the cortical response to proprioceptive stimulation was greater when participants were planning a step than when they stood still, and that this sensory facilitation was suppressed in microgravity. The aim of the present study was to test whether the absence of gravity-related sensory afferents during movement planning in microgravity prevented the proprioceptive cortical processing to be enhanced. We reestablished a reference frame in microgravity by providing and translating a horizontal support on which the participants were standing and verified whether this procedure restored the proprioceptive facilitation. The slight translation of the base of support (lateral direction), which occurred prior to step initiation, stimulated at least cutaneous and vestibular receptors. The sensitivity to proprioceptive stimulation was assessed by measuring the amplitude of the cortical somatosensory-evoked potential (SEP, over the Cz electrode) following the vibration of the leg muscle. The vibration lasted 1 s and the participants were asked to either initiate a step at the vibration offset or to remain still. We found that the early SEP (90–160 ms) was smaller when the platform was translated than when it remained stationary, revealing the existence of an interference phenomenon (i.e., when proprioceptive stimulation is preceded by the stimulation of different sensory modalities evoked by the platform translation). By contrast, the late SEP (550 ms post proprioceptive stimulation onset) was greater when the translation preceded the vibration compared to a condition without pre-stimulation (i.e., no translation). This suggests that restoring a body reference system which is impaired in microgravity allowed a greater proprioceptive cortical processing. Importantly, however, the late SEP was similarly increased when participants either produced a step or remained still. We propose that the absence of step-induced facilitation of proprioceptive cortical processing results from a decreased weight of proprioception in the absence of balance constraints in microgravity. PMID:25259838

Fully-Polymeric pH Sensor Realized by Means of a Single-Step Soft Embossing Technique

PubMed Central

Fanzio, Paola; Chang, Chi-Tung; Skolimowski, Maciej; Tanzi, Simone; Sasso, Luigi

2017-01-01

We present here an electrochemical sensor microsystem for the monitoring of pH. The all-polymeric device is comprised of a cyclic olefin copolymer substrate, a 200 nm-thin patterned layer of conductive polymer (PEDOT), and a 70 nm electropolymerized layer of a pH sensitive conductive polymer (polyaniline). The patterning of the fluidic (microfluidic channels) and conductive (wiring and electrodes) functional elements was achieved with a single soft PDMS mold via a single embossing step process. A post-processing treatment with ethylene glycol assured the functional enhancement of the electrodes, as demonstrated via an electrical and electrochemical characterization. A surface modification of the electrodes was carried out, based on voltammetric electropolymerization, to obtain a thin layer of polyaniline. The mechanism for pH sensing is based on the redox reactions of the polyaniline layer caused by protonation. The sensing performance of the microsystem was finally validated by monitoring its potentiometric response upon exposure to a relevant range of pH. PMID:28531106

How to locate & hire clinical/biomedical engineers, supervisors, managers & biomedical equipment technicians.

PubMed

Pacela, A F; Brush, L C

1993-01-01

This article has described the process and the resources available for locating and hiring clinical/biomedical engineers, supervisors, managers, and biomedical equipment technicians. First, the employer must determine the qualifications for the position, including job titles, descriptions, pay scales, and certification requirements. Next, the employer must find qualified applicants. The most common way to do this is to use "outside" contacts, such as help-wanted advertising, specialized job placement agencies, schools and colleges, military resources, regional biomedical societies, and nationwide societies. An "inside" search involves limited internal advertising of the position and using personal referrals for candidates. Finally, the employer must screen the applicants. The position description is the obvious first step in this process, but there are other pre-screening techniques, such as employment testing. Interviewing is the most common way to hire for job positions, but the interviewer needs to know about the position and ask the right questions. Post-interview screening is a final step to help determine the best job-person match.

Vibration study of a vehicle suspension assembly with the finite element method

NASA Astrophysics Data System (ADS)

Cătălin Marinescu, Gabriel; Castravete, Ştefan-Cristian; Dumitru, Nicolae

2017-10-01

The main steps of the present work represent a methodology of analysing various vibration effects over suspension mechanical parts of a vehicle. A McPherson type suspension from an existing vehicle was created using CAD software. Using the CAD model as input, a finite element model of the suspension assembly was developed. Abaqus finite element analysis software was used to pre-process, solve, and post-process the results. Geometric nonlinearities are included in the model. Severe sources of nonlinearities such us friction and contact are also included in the model. The McPherson spring is modelled as linear spring. The analysis include several steps: preload, modal analysis, the reduction of the model to 200 generalized coordinates, a deterministic external excitation, a random excitation that comes from different types of roads. The vibration data used as an input for the simulation were previously obtained by experimental means. Mathematical expressions used for the simulation were also presented in the paper.

From the CMS Computing Experience in the WLCG STEP'09 Challenge to the First Data Taking of the LHC Era

NASA Astrophysics Data System (ADS)

Bonacorsi, D.; Gutsche, O.

The Worldwide LHC Computing Grid (WLCG) project decided in March 2009 to perform scale tests of parts of its overall Grid infrastructure before the start of the LHC data taking. The "Scale Test for the Experiment Program" (STEP'09) was performed mainly in June 2009 -with more selected tests in September- October 2009 -and emphasized the simultaneous test of the computing systems of all 4 LHC experiments. CMS tested its Tier-0 tape writing and processing capabilities. The Tier-1 tape systems were stress tested using the complete range of Tier-1 work-flows: transfer from Tier-0 and custody of data on tape, processing and subsequent archival, redistribution of datasets amongst all Tier-1 sites as well as burst transfers of datasets to Tier-2 sites. The Tier-2 analysis capacity was tested using bulk analysis job submissions to backfill normal user activity. In this talk, we will report on the different performed tests and present their post-mortem analysis.

Fully-Polymeric pH Sensor Realized by Means of a Single-Step Soft Embossing Technique.

PubMed

Fanzio, Paola; Chang, Chi-Tung; Skolimowski, Maciej; Tanzi, Simone; Sasso, Luigi

2017-05-20

We present here an electrochemical sensor microsystem for the monitoring of pH. The all-polymeric device is comprised of a cyclic olefin copolymer substrate, a 200 nm-thin patterned layer of conductive polymer (PEDOT), and a 70 nm electropolymerized layer of a pH sensitive conductive polymer (polyaniline). The patterning of the fluidic (microfluidic channels) and conductive (wiring and electrodes) functional elements was achieved with a single soft PDMS mold via a single embossing step process. A post-processing treatment with ethylene glycol assured the functional enhancement of the electrodes, as demonstrated via an electrical and electrochemical characterization. A surface modification of the electrodes was carried out, based on voltammetric electropolymerization, to obtain a thin layer of polyaniline. The mechanism for pH sensing is based on the redox reactions of the polyaniline layer caused by protonation. The sensing performance of the microsystem was finally validated by monitoring its potentiometric response upon exposure to a relevant range of pH.

Direct Growth of Graphene Film on Germanium Substrate

PubMed Central

Wang, Gang; Zhang, Miao; Zhu, Yun; Ding, Guqiao; Jiang, Da; Guo, Qinglei; Liu, Su; Xie, Xiaoming; Chu, Paul K.; Di, Zengfeng; Wang, Xi

2013-01-01

Graphene has been predicted to play a role in post-silicon electronics due to the extraordinary carrier mobility. Chemical vapor deposition of graphene on transition metals has been considered as a major step towards commercial realization of graphene. However, fabrication based on transition metals involves an inevitable transfer step which can be as complicated as the deposition of graphene itself. By ambient-pressure chemical vapor deposition, we demonstrate large-scale and uniform depositon of high-quality graphene directly on a Ge substrate which is wafer scale and has been considered to replace conventional Si for the next generation of high-performance metal-oxide-semiconductor field-effect transistors (MOSFETs). The immiscible Ge-C system under equilibrium conditions dictates graphene depositon on Ge via a self-limiting and surface-mediated process rather than a precipitation process as observed from other metals with high carbon solubility. Our technique is compatible with modern microelectronics technology thus allowing integration with high-volume production of complementary metal-oxide-semiconductors (CMOS). PMID:23955352

Effects of gyrokinesis exercise on the gait pattern of female patients with chronic low back pain

PubMed Central

Seo, Kook-Eun; Park, Tae-Jin

2016-01-01

[Purpose] The purpose of the present study was to use kinematic variables to identify the effects of 8/weeks’ performance of a gyrokinesis exercise on the gait pattern of females with chronic low back pain. [Subjects] The subjects of the present study were females in their late 20s to mid 30s who were chronic back pain patients. [Methods] A 3-D motion analysis system was used to measure the changes in their gait patterns between pre and post-gyrokintic exercise. The SPSS 21.0 statistics program was used to perform the paired t-test, to compare the gait patterns of pre-post-gyrokinesis exercise. [Results] In the gait analysis, pre-post-gyrokinesis exercise gait patterns showed statistically significant differences in right and left step length, stride length, right-left step widths, and stride speed. [Conclusion] Gait pattern analysis revealed increases in step length, stride length, and stride speed along with a decrease in step width after 8 weeks of gyrokinesis exercise, demonstrating it improved gait pattern. PMID:27065537

Pre- to Post-operative Changes in Physical Activity: Report from the Longitudinal Assessment of Bariatric Surgery-2

PubMed Central

King, Wendy C; Hsu, Jesse Y; Belle, Steven H; Courcoulas, Anita P; Eid, George M; Flum, David R; Mitchell, James E; Pender, John R; Smith, Mark D; Steffen, Kristine J; Wolfe, Bruce M

2011-01-01

Background Numerous studies report that bariatric surgery patients report more physical activity (PA) after surgery than before, but the quality of PA assessment has been questionable. Methods The Longitudinal Assessment of Bariatric Surgery-2 is a 10-center longitudinal study of adults undergoing bariatric surgery. Of 2458 participants, 455 were given an activity monitor, which records steps/minute, and an exercise diary before and 1 year after surgery. Mean step/day, active minutes/day, and high-cadence minutes/week were calculated for 310 participants who wore the monitor at least 10 hours/day for at least 3 days at both time points. Pre- and post-surgery PA were compared for differences using the Wilcoxon signed-rank test. Generalized Estimating Equations identified independent pre-operative predictors of post-operative PA. Results PA increased significantly (p<.0001) pre- to post-operative for all PA measures. Median values pre- and post-operative were: 7563 and 8788 steps/day; 309 and 340 active minutes/day; and 72 and 112 high-cadence minutes/week, respectively. However, depending on the PA measure, 24–29% of participants were at least 5% less active post-operative than pre-operative. Controlling for surgical procedure, sex, age and BMI, higher PA preoperative independently predicted higher PA post-operative (p<.0001, all PA measures). Less pain, not having asthma and self-report of increasing PA as a weight loss strategy pre-operative also independently predicted more high-cadence minutes/week post-operative (p<.05). Conclusion The majority of adults increase their PA level following bariatric surgery. However, most remain insufficiently active and some become less active. Increasing PA, addressing pain and treating asthma prior to surgery may have a positive impact on post-operative PA. PMID:21944951

Evaluation of the Inhalation Carcinogenicity of Ethylene Oxide ...

EPA Pesticide Factsheets

On September 22, 2006, the draft Evaluation of the Carinogenicity of Ethylene Oxide (EPA/635/R-06/003) and the draft charge to external peer reviewers were released for external peer review and public comment. This draft was reviewed by EPA’s Science Advisory Board (SAB) and the expert panel’s final report was made available December 21, 2007. Since that time the Agency implemented the May 2009 IRIS assessment development process in which other federal agencies and the Executive Offices of the President are provided two opportunities to comment on IRIS human health assessments; Interagency Science Consultation (Step 3) prior to public comment/peer review and Interagency Science Discussion (Step 6b) following peer review. In July, 2011, the draft assessment incorporating the SAB recommendations (December 2007) was sent to other federal agencies and Executive Offices of the President as part of Step 6 of the IRIS process. Following the May 2009 process, all written comments submitted by other agencies will be made publicly available. Accordingly, the interagency comments for ethylene oxide and the interagency science discussion materials provided to the other agencies are posted on this site. Note: After further consideration EPA has decided to undertake an additional peer review of the revised draft assessment on how the Agency responded to the SAB panel recommendations (December 2007), the exposure-response modeling of epidemiologic data, including n

Impacts of Post-metallisation Processes on the Electrical and Photovoltaic Properties of Si Quantum Dot Solar Cells.

PubMed

Di, Dawei; Perez-Wurfl, Ivan; Gentle, Angus; Kim, Dong-Ho; Hao, Xiaojing; Shi, Lei; Conibeer, Gavin; Green, Martin A

2010-08-01

As an important step towards the realisation of silicon-based tandem solar cells using silicon quantum dots embedded in a silicon dioxide (SiO(2)) matrix, single-junction silicon quantum dot (Si QD) solar cells on quartz substrates have been fabricated. The total thickness of the solar cell material is 420 nm. The cells contain 4 nm diameter Si quantum dots. The impacts of post-metallisation treatments such as phosphoric acid (H(3)PO(4)) etching, nitrogen (N(2)) gas anneal and forming gas (Ar: H(2)) anneal on the cells' electrical and photovoltaic properties are investigated. The Si QD solar cells studied in this work have achieved an open circuit voltage of 410 mV after various processes. Parameters extracted from dark I-V, light I-V and circular transfer length measurement (CTLM) suggest limiting mechanism in the Si QD solar cell operation and possible approaches for further improvement.

Global gene expression analysis by combinatorial optimization.

PubMed

Ameur, Adam; Aurell, Erik; Carlsson, Mats; Westholm, Jakub Orzechowski

2004-01-01

Generally, there is a trade-off between methods of gene expression analysis that are precise but labor-intensive, e.g. RT-PCR, and methods that scale up to global coverage but are not quite as quantitative, e.g. microarrays. In the present paper, we show how how a known method of gene expression profiling (K. Kato, Nucleic Acids Res. 23, 3685-3690 (1995)), which relies on a fairly small number of steps, can be turned into a global gene expression measurement by advanced data post-processing, with potentially little loss of accuracy. Post-processing here entails solving an ancillary combinatorial optimization problem. Validation is performed on in silico experiments generated from the FANTOM data base of full-length mouse cDNA. We present two variants of the method. One uses state-of-the-art commercial software for solving problems of this kind, the other a code developed by us specifically for this purpose, released in the public domain under GPL license.

Designing divertor targets for uniform power load

NASA Astrophysics Data System (ADS)

Dekeyser, W.; Reiter, D.; Baelmans, M.

2015-08-01

Divertor design for next step fusion reactors heavily relies on 2D edge plasma modeling with codes as e.g. B2-EIRENE. While these codes are typically used in a design-by-analysis approach, in previous work we have shown that divertor design can alternatively be posed as a mathematical optimization problem, and solved very efficiently using adjoint methods adapted from computational aerodynamics. This approach has been applied successfully to divertor target shape design for more uniform power load. In this paper, the concept is further extended to include all contributions to the target power load, with particular focus on radiation. In a simplified test problem, we show the potential benefits of fully including the radiation load in the design cycle as compared to only assessing this load in a post-processing step.

A three-image algorithm for hard x-ray grating interferometry.

PubMed

Pelliccia, Daniele; Rigon, Luigi; Arfelli, Fulvia; Menk, Ralf-Hendrik; Bukreeva, Inna; Cedola, Alessia

2013-08-12

A three-image method to extract absorption, refraction and scattering information for hard x-ray grating interferometry is presented. The method comprises a post-processing approach alternative to the conventional phase stepping procedure and is inspired by a similar three-image technique developed for analyzer-based x-ray imaging. Results obtained with this algorithm are quantitatively comparable with phase-stepping. This method can be further extended to samples with negligible scattering, where only two images are needed to separate absorption and refraction signal. Thanks to the limited number of images required, this technique is a viable route to bio-compatible imaging with x-ray grating interferometer. In addition our method elucidates and strengthens the formal and practical analogies between grating interferometry and the (non-interferometric) diffraction enhanced imaging technique.

Reducing door-to-needle times using Toyota's lean manufacturing principles and value stream analysis.

PubMed

Ford, Andria L; Williams, Jennifer A; Spencer, Mary; McCammon, Craig; Khoury, Naim; Sampson, Tomoko R; Panagos, Peter; Lee, Jin-Moo

2012-12-01

Earlier tissue-type plasminogen activator (tPA) treatment for acute ischemic stroke increases efficacy, prompting national efforts to reduce door-to-needle times. We used lean process improvement methodology to develop a streamlined intravenous tPA protocol. In early 2011, a multidisciplinary team analyzed the steps required to treat patients with acute ischemic stroke with intravenous tPA using value stream analysis (VSA). We directly compared the tPA-treated patients in the "pre-VSA" epoch with the "post-VSA" epoch with regard to baseline characteristics, protocol metrics, and clinical outcomes. The VSA revealed several tPA protocol inefficiencies: routing of patients to room, then to CT, then back to the room; serial processing of workflow; and delays in waiting for laboratory results. On March 1, 2011, a new protocol incorporated changes to minimize delays: routing patients directly to head CT before the patient room, using parallel process workflow, and implementing point-of-care laboratories. In the pre and post-VSA epochs, 132 and 87 patients were treated with intravenous tPA, respectively. Compared with pre-VSA, door-to-needle times and percent of patients treated ≤60 minutes from hospital arrival were improved in the post-VSA epoch: 60 minutes versus 39 minutes (P<0.0001) and 52% versus 78% (P<0.0001), respectively, with no change in symptomatic hemorrhage rate. Lean process improvement methodology can expedite time-dependent stroke care without compromising safety.

Reducing Door-to-Needle Times using Toyota’s Lean Manufacturing Principles and Value Stream Analysis

PubMed Central

Ford, Andria L.; Williams, Jennifer A.; Spencer, Mary; McCammon, Craig; Khoury, Naim; Sampson, Tomoko; Panagos, Peter; Lee, Jin-Moo

2012-01-01

Background Earlier tPA treatment for acute ischemic stroke increases efficacy, prompting national efforts to reduce door-to-needle times (DNTs). We utilized lean process improvement methodology to develop a streamlined IV tPA protocol. Methods In early 2011, a multi-disciplinary team analyzed the steps required to treat acute ischemic stroke patients with IV tPA, utilizing value stream analysis (VSA). We directly compared the tPA-treated patients in the “pre-VSA” epoch to the “post-VSA” epoch with regard to baseline characteristics, protocol metrics, and clinical outcomes. Results The VSA revealed several tPA protocol inefficiencies: routing of patients to room, then to CT, then back to room; serial processing of work flow; and delays in waiting for lab results. On 3/1/2011, a new protocol incorporated changes to minimize delays: routing patients directly to head CT prior to patient room, utilizing parallel process work-flow, and implementing point-of-care labs. In the pre-and post-VSA epochs, 132 and 87 patients were treated with IV tPA, respectively. Compared to pre-VSA, DNTs and percent of patients treated ≤60 minutes from hospital arrival were improved in the post-VSA epoch: 60 min vs. 39 min (p<0.0001) and 52% vs. 78% (p<0.0001), respectively, with no change in symptomatic hemorrhage rate. Conclusions Lean process improvement methodology can expedite time-dependent stroke care, without compromising safety. PMID:23138440

76 FR 78954 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-20

... POSTAL REGULATORY COMMISSION [Docket No. A2012-85; Order No. 1041] Post Office Closing AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: This document informs the public that an appeal of the closing of the Milan, Kansas post office has been filed. It identifies preliminary steps and...

76 FR 80986 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... POSTAL REGULATORY COMMISSION [Docket No. A2012-86; Order No. 1042] Post Office Closing AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: This document informs the public that an appeal of the closing of the McCallsburg, Iowa post office has been filed. It identifies preliminary steps and...

76 FR 80416 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... POSTAL REGULATORY COMMISSION [Docket No. A2012-89; Order No. 1054] Post Office Closing AGENCY... the closing of the Mt. Sterling, Wisconsin post office has been filed. It identifies preliminary steps... Commission received a petition for review of the Postal Service's determination to close the Mt. Sterling...

77 FR 823 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... POSTAL REGULATORY COMMISSION [Docket No. A2012-92; Order No. 1080] Post Office Closing AGENCY... the closing of the Plover, Iowa post office has been filed. It identifies preliminary steps and...), the Commission received four petitions for review of the Postal Service's determination to close the...

76 FR 28104 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... POSTAL REGULATORY COMMISSION [Docket No. A2011-14; Order No. 725] Post Office Closing AGENCY... the closing of the Tateville, Kentucky post office has been filed. It identifies preliminary steps and... office. Petitions were filed by Rebecca Kroell, Glenn Walker, and Nancy Walker (Petitioners). All three...

77 FR 1754 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... POSTAL REGULATORY COMMISSION [Docket No. A2012-96; Order No. 1084] Post Office Closing AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: This document informs the public that an appeal of the closing of the St. Anthony, Iowa post office has been filed. It identifies preliminary steps and...

Digital image processing of vascular angiograms

NASA Technical Reports Server (NTRS)

Selzer, R. H.; Beckenbach, E. S.; Blankenhorn, D. H.; Crawford, D. W.; Brooks, S. H.

1975-01-01

The paper discusses the estimation of the degree of atherosclerosis in the human femoral artery through the use of a digital image processing system for vascular angiograms. The film digitizer uses an electronic image dissector camera to scan the angiogram and convert the recorded optical density information into a numerical format. Another processing step involves locating the vessel edges from the digital image. The computer has been programmed to estimate vessel abnormality through a series of measurements, some derived primarily from the vessel edge information and others from optical density variations within the lumen shadow. These measurements are combined into an atherosclerosis index, which is found in a post-mortem study to correlate well with both visual and chemical estimates of atherosclerotic disease.

Type 1 Does The Two-Step: Type 1 Secretion Substrates With A Functional Periplasmic Intermediate.

PubMed

Smith, Timothy J; Sondermann, Holger; O'Toole, George A

2018-06-04

Bacteria have evolved several secretion strategies for polling and responding to environmental flux and insult. Of these, the type 1 secretion system (T1SS) is known to secrete an array of biologically diverse proteins - from small < 10 kDa bacteriocins to gigantic adhesins with a mass over 1 MDa. For the last several decades T1SS have been characterized as a one-step translocation strategy whereby the secreted substrate is transported directly into the extracellular environment from the cytoplasm with no periplasmic intermediate. Recent phylogenetic, biochemical, and genetic evidence point to a distinct sub-group of T1SS machinery linked with a bacterial transglutaminase-like cysteine proteinase (BTLCP), which uses a two-step secretion mechanism. BTLCP-linked T1SS transport a class of repeats-in-toxin (RTX) adhesins that are critical for biofilm formation. The prototype of this RTX adhesin group, LapA of Pseudomonas fluorescens Pf0-1, uses a novel N-terminal retention module to anchor the adhesin at the cell surface as a secretion intermediate threaded through the outer membrane-localized, TolC-like protein LapE. This secretion intermediate is post-translationally cleaved by the BTLCP family LapG protein to release LapA from its cognate T1SS pore. Thus, secretion of LapA and related RTX adhesins into the extracellular environment appears to be a T1SS-mediated, two-step process that involves a periplasmic intermediate. In this review, we contrast the T1SS machinery and substrates of the BLTCP-linked two-step secretion process with those of the classical one-step T1SS to better understand the newly recognized and expanded role of this secretion machinery. Copyright © 2018 American Society for Microbiology.

Final report for project "Next-Generation Semiconductors for Solar Photoelectrolysis"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalifah, Peter

2016-09-15

In this paper, effective methods have been developed for preparing high-quality LaTiO 2N films on conductive La 5Ti 5O 17 substrates that can serve as photoanodes for photoelectrochemical water oxidation. One paper has been written by the post-doc who completed this comprehensive, interdisciplinary study, and it is presently being finalized for submission. Our approach to this system integrates expertise that we have developed in single crystal growth, thin film growth, and thin film post-processing. Through this work, LTON films have been fully optimized for light harvesting, as their band gap is optimally matched with the incident solar spectrum and themore » film thicknesses have been optimized based on the absolute absorption coefficients that we have measured for this system. The next step is to optimize the co-catalyst functionalization and the solution conditions to maximize the catalytic activity for water oxidation. Since the preliminary tests described here were done without a water oxidation co-catalyst, and since good water oxidation catalysts have previously been identified based on studies of powder samples, this next step is highly likely to be successful.« less

Hollow fiber-supported designer ionic liquid sponges for post-combustion CO2 scrubbing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, JS; Hillesheim, PC; Huang, DK

A proof of concept study for a new type of carbon capture system is considered for post-combustion CO2 capture based on porous hollow fiber sorbents with ionic liquids sorbed in the cell walls of the fiber. This study proves that delicate morphological features in the open-celled porous wall can be maintained during the infusion process. Mixtures of task specific ionic liquid (i.e. [BMIM][Tf2N]) and superbase (i.e. DBU) were loaded into polyamide-imide (PAI) fibers by a so-called two-step non-solvent infusion protocol. In the protocol, methanol carries ionic liquids into the pore cell walls of hollow fibers and then hexane carries superbasemore » to create an efficient CO2 sorbent. Our ionic liquid/superbase impregnation technique overcomes a serious increase in mass transfer resistance upon reaction with CO2, thereby allowing its large scale utilization for post-combustion CO2 capture. The investigation on the effect of different pore former additives (different molecular weights of polyvinylpyrrolidone, lithium nitrate, and their mixtures) suggested that a large molecular weight of PVP (M-w; 1300k) including dope composition produces highly interconnected open cell pore structures of PAI hollow fibers. Lastly, a lumen side barrier layer was successfully formed on the bore side of neat PAI fibers by using a mixture of Neoprene (R) with crosslinking agents (TSR-633) via a post-treatment process. The lumen layer will enable heat removal from the fiber sorbents during their application in rapid thermal swing cycling processes. (C) 2012 Elsevier Ltd. All rights reserved.« less

MITK global tractography

NASA Astrophysics Data System (ADS)

Neher, Peter F.; Stieltjes, Bram; Reisert, Marco; Reicht, Ignaz; Meinzer, Hans-Peter; Fritzsche, Klaus H.

2012-02-01

Fiber tracking algorithms yield valuable information for neurosurgery as well as automated diagnostic approaches. However, they have not yet arrived in the daily clinical practice. In this paper we present an open source integration of the global tractography algorithm proposed by Reisert et.al.1 into the open source Medical Imaging Interaction Toolkit (MITK) developed and maintained by the Division of Medical and Biological Informatics at the German Cancer Research Center (DKFZ). The integration of this algorithm into a standardized and open development environment like MITK enriches accessibility of tractography algorithms for the science community and is an important step towards bringing neuronal tractography closer to a clinical application. The MITK diffusion imaging application, downloadable from www.mitk.org, combines all the steps necessary for a successful tractography: preprocessing, reconstruction of the images, the actual tracking, live monitoring of intermediate results, postprocessing and visualization of the final tracking results. This paper presents typical tracking results and demonstrates the steps for pre- and post-processing of the images.

76 FR 44385 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... POSTAL REGULATORY COMMISSION [Docket No. A2011-22; Order No. 763] Post Office Closing AGENCY... the closing of the Peach Orchard, Arkansas post office has been filed. It identifies preliminary steps...), on July 14, 2011, the Commission received a petition for review of the closing of the Peach Orchard...

76 FR 44383 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... POSTAL REGULATORY COMMISSION [Docket No. A2011-23; Order No. 764] Post Office Closing AGENCY... the closing of the Rosser, Texas post office has been filed. It identifies preliminary steps and...), on July 14, 2011, the Commission received a petition for review of the closing of the Rosser, Texas...

77 FR 1090 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-09

... POSTAL REGULATORY COMMISSION [Docket No. A2012-93; Order No. 1081] Post Office Closing AGENCY... the closing of the Odin, Minnesota post office has been filed. It identifies preliminary steps and... office in Odin, Minnesota. The first petition for review received November 30, 2011, was filed by Paul S...

77 FR 1755 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... POSTAL REGULATORY COMMISSION [Docket No. A2012-98; Order No. 1086] Post Office Closing AGENCY... the closing of the Halsey, Nebraska post office has been filed. It identifies preliminary steps and... office in Halsey, Nebraska. The first petition for review received December 16, 2011, was filed by Lynn...

77 FR 1752 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... POSTAL REGULATORY COMMISSION [Docket No. A2012-97; Order No. 1085] Post Office Closing AGENCY... the closing of the Ashton, Iowa, post office has been filed. It identifies preliminary steps and... office in Ashton, Iowa. The first petition for review received December 9, 2011, was filed by Brian D...

Single-Receiver GPS Phase Bias Resolution

NASA Technical Reports Server (NTRS)

Bertiger, William I.; Haines, Bruce J.; Weiss, Jan P.; Harvey, Nathaniel E.

2010-01-01

Existing software has been modified to yield the benefits of integer fixed double-differenced GPS-phased ambiguities when processing data from a single GPS receiver with no access to any other GPS receiver data. When the double-differenced combination of phase biases can be fixed reliably, a significant improvement in solution accuracy is obtained. This innovation uses a large global set of GPS receivers (40 to 80 receivers) to solve for the GPS satellite orbits and clocks (along with any other parameters). In this process, integer ambiguities are fixed and information on the ambiguity constraints is saved. For each GPS transmitter/receiver pair, the process saves the arc start and stop times, the wide-lane average value for the arc, the standard deviation of the wide lane, and the dual-frequency phase bias after bias fixing for the arc. The second step of the process uses the orbit and clock information, the bias information from the global solution, and only data from the single receiver to resolve double-differenced phase combinations. It is called "resolved" instead of "fixed" because constraints are introduced into the problem with a finite data weight to better account for possible errors. A receiver in orbit has much shorter continuous passes of data than a receiver fixed to the Earth. The method has parameters to account for this. In particular, differences in drifting wide-lane values must be handled differently. The first step of the process is automated, using two JPL software sets, Longarc and Gipsy-Oasis. The resulting orbit/clock and bias information files are posted on anonymous ftp for use by any licensed Gipsy-Oasis user. The second step is implemented in the Gipsy-Oasis executable, gd2p.pl, which automates the entire process, including fetching the information from anonymous ftp

[Process and key points of clinical literature evaluation of post-marketing traditional Chinese medicine].

PubMed

Liu, Huan; Xie, Yanming

2011-10-01

The clinical literature evaluation of the post-marketing traditional Chinese medicine is a comprehensive evaluation by the comprehensive gain, analysis of the drug, literature of drug efficacy, safety, economy, based on the literature evidence and is part of the evaluation of evidence-based medicine. The literature evaluation in the post-marketing Chinese medicine clinical evaluation is in the foundation and the key position. Through the literature evaluation, it can fully grasp the information, grasp listed drug variety of traditional Chinese medicines second development orientation, make clear further clinical indications, perfect the medicines, etc. This paper discusses the main steps and emphasis of the clinical literature evaluation. Emphasizing security literature evaluation should attach importance to the security of a comprehensive collection drug information. Safety assessment should notice traditional Chinese medicine validity evaluation in improving syndrome, improveing the living quality of patients with special advantage. The economics literature evaluation should pay attention to reliability, sensitivity and practicability of the conclusion.

The Adverse Drug Reactions from Patient Reports in Social Media Project: Five Major Challenges to Overcome to Operationalize Analysis and Efficiently Support Pharmacovigilance Process

PubMed Central

Dahamna, Badisse; Guillemin-Lanne, Sylvie; Darmoni, Stefan J; Faviez, Carole; Huot, Charles; Katsahian, Sandrine; Leroux, Vincent; Pereira, Suzanne; Richard, Christophe; Schück, Stéphane; Souvignet, Julien; Lillo-Le Louët, Agnès; Texier, Nathalie

2017-01-01

Background Adverse drug reactions (ADRs) are an important cause of morbidity and mortality. Classical Pharmacovigilance process is limited by underreporting which justifies the current interest in new knowledge sources such as social media. The Adverse Drug Reactions from Patient Reports in Social Media (ADR-PRISM) project aims to extract ADRs reported by patients in these media. We identified 5 major challenges to overcome to operationalize the analysis of patient posts: (1) variable quality of information on social media, (2) guarantee of data privacy, (3) response to pharmacovigilance expert expectations, (4) identification of relevant information within Web pages, and (5) robust and evolutive architecture. Objective This article aims to describe the current state of advancement of the ADR-PRISM project by focusing on the solutions we have chosen to address these 5 major challenges. Methods In this article, we propose methods and describe the advancement of this project on several aspects: (1) a quality driven approach for selecting relevant social media for the extraction of knowledge on potential ADRs, (2) an assessment of ethical issues and French regulation for the analysis of data on social media, (3) an analysis of pharmacovigilance expert requirements when reviewing patient posts on the Internet, (4) an extraction method based on natural language processing, pattern based matching, and selection of relevant medical concepts in reference terminologies, and (5) specifications of a component-based architecture for the monitoring system. Results Considering the 5 major challenges, we (1) selected a set of 21 validated criteria for selecting social media to support the extraction of potential ADRs, (2) proposed solutions to guarantee data privacy of patients posting on Internet, (3) took into account pharmacovigilance expert requirements with use case diagrams and scenarios, (4) built domain-specific knowledge resources embeding a lexicon, morphological rules, context rules, semantic rules, syntactic rules, and post-analysis processing, and (5) proposed a component-based architecture that allows storage of big data and accessibility to third-party applications through Web services. Conclusions We demonstrated the feasibility of implementing a component-based architecture that allows collection of patient posts on the Internet, near real-time processing of those posts including annotation, and storage in big data structures. In the next steps, we will evaluate the posts identified by the system in social media to clarify the interest and relevance of such approach to improve conventional pharmacovigilance processes based on spontaneous reporting. PMID:28935617

Deformable registration of x-ray to MRI for post-implant dosimetry in prostate brachytherapy

NASA Astrophysics Data System (ADS)

Park, Seyoun; Song, Danny Y.; Lee, Junghoon

2016-03-01

Post-implant dosimetric assessment in prostate brachytherapy is typically performed using CT as the standard imaging modality. However, poor soft tissue contrast in CT causes significant variability in target contouring, resulting in incorrect dose calculations for organs of interest. CT-MR fusion-based approach has been advocated taking advantage of the complementary capabilities of CT (seed identification) and MRI (soft tissue visibility), and has proved to provide more accurate dosimetry calculations. However, seed segmentation in CT requires manual review, and the accuracy is limited by the reconstructed voxel resolution. In addition, CT deposits considerable amount of radiation to the patient. In this paper, we propose an X-ray and MRI based post-implant dosimetry approach. Implanted seeds are localized using three X-ray images by solving a combinatorial optimization problem, and the identified seeds are registered to MR images by an intensity-based points-to-volume registration. We pre-process the MR images using geometric and Gaussian filtering. To accommodate potential soft tissue deformation, our registration is performed in two steps, an initial affine transformation and local deformable registration. An evolutionary optimizer in conjunction with a points-to-volume similarity metric is used for the affine registration. Local prostate deformation and seed migration are then adjusted by the deformable registration step with external and internal force constraints. We tested our algorithm on six patient data sets, achieving registration error of (1.2+/-0.8) mm in < 30 sec. Our proposed approach has the potential to be a fast and cost-effective solution for post-implant dosimetry with equivalent accuracy as the CT-MR fusion-based approach.

Post-transcriptional regulation in corticogenesis: how RNA-binding proteins help build the brain

PubMed Central

Pilaz, Louis-Jan; Silver, Debra L.

2015-01-01

The cerebral cortex, the brain structure responsible for our higher cognitive functions, is built during embryonic development in a process called corticogenesis. During corticogenesis, neural stem cells generate distinct populations of progenitors and excitatory neurons. These new neurons migrate radially in the cortex, eventually forming neuronal layers and establishing synaptic connections with other neurons both within and outside the cortex. Perturbations to corticogenesis can result in severe neurodevelopmental disorders, thus emphasizing the need to better understand molecular regulation of brain development. Recent studies in both model organisms and humans have collectively highlighted roles for post-transcriptional regulation in virtually all steps of corticogenesis. Genomic approaches have revealed global RNA changes associated with spatial and temporal regulation of cortical development. Additionally, genetic studies have uncovered RNA-binding proteins (RBPs) critical for cell proliferation, differentiation, and migration within the developing neocortex. Many of these same RBPs play causal roles in neurodevelopmental pathologies. In the developing neocortex, RBPs influence diverse steps of mRNA metabolism, including splicing, stability, translation, and localization. With the advent of new technologies, researchers have begun to uncover key transcripts regulated by these RBPs. Given the complexity of the developing mammalian cortex, a major challenge for the future will be to understand how dynamic RNA regulation occurs within heterogeneous cell populations, across space and time. In sum, post-transcriptional regulation has emerged as a critical mechanism for driving corticogenesis and exciting direction of future research. PMID:26088328

76 FR 44384 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... POSTAL REGULATORY COMMISSION [Docket No. A2011-24; Order No. 765] Post Office Closing AGENCY... the closing of the Ben Franklin, Texas post office has been filed. It identifies preliminary steps and...), on July 15, 2011, the Commission received a petition for review of the closing of the Ben Franklin...

A systematic review of rehabilitation interventions to prevent and treat depression in post-stroke aphasia.

PubMed

Baker, Caroline; Worrall, Linda; Rose, Miranda; Hudson, Kyla; Ryan, Brooke; O'Byrne, Leana

2018-08-01

Stepped psychological care is the delivery of routine assessment and interventions for psychological problems, including depression. The aim of this systematic review was to analyze and synthesize the evidence of rehabilitation interventions to prevent and treat depression in post-stroke aphasia and adapt the best evidence within a stepped psychological care framework. Four databases were systematically searched up to March 2017: Medline, CINAHL, PsycINFO and The Cochrane Library. Forty-five studies met inclusion and exclusion criteria. Level of evidence, methodological quality and results were assessed. People with aphasia with mild depression may benefit from psychosocial-type treatments (based on 3 level ii studies with small to medium effect sizes). For those without depression, mood may be enhanced through participation in a range of interventions (based on 4 level ii studies; 1 level iii-3 study and 6 level iv studies). It is not clear which interventions may prevent depression in post-stroke aphasia. No evidence was found for the treatment of moderate to severe depression in post-stroke aphasia. This study found some interventions that may improve depression outcomes for those with mild depression or without depression in post-stroke aphasia. Future research is needed to address methodological limitations and evaluate and support the translation of stepped psychological care across the continuum. Implications for Rehabilitation Stepped psychological care after stroke is a framework with levels 1 to 4 which can be used to prevent and treat depression for people with aphasia. A range of rehabilitation interventions may be beneficial to mood at level 1 for people without clinically significant depression (e.g., goal setting and achievement, psychosocial support, communication partner training and narrative therapy). People with mild symptoms of depression may benefit from interventions at level 2 (e.g., behavioral therapy, psychosocial support and problem solving). People with moderate to severe symptoms of depression require specialist mental health/behavioral services in collaboration with stroke care at levels 3 and 4 of stepped psychological care.

Ligament flow during drop-on-demand inkjet printing of bioink containing living cells

NASA Astrophysics Data System (ADS)

Zhang, Mengyun; Krishnamoorthy, Srikumar; Song, Hongtao; Zhang, Zhengyi; Xu, Changxue

2017-03-01

Organ printing utilizes tissue spheroids or filaments as building blocks to fabricate three-dimensional (3D) functional tissues and organs based on a layer-by-layer manufacturing mechanism. These fabricated tissues and organs are envisioned as alternatives to replace the damaged human tissues and organs, which is emerging as a promising solution to solve the organ donor shortage problem being faced all over the world. Inkjetting, one of the key technologies in organ printing, has been widely developed because of its moderate fabrication cost, good process controllability, and scale-up potentials. There are several key steps towards inkjet-based organ printing: generation of droplets from bioink, fabrication of 3D cellular structures, and post-printing tissue fusion and maturation. The droplet formation process is the first step, affecting the overall feasibility of the envisioned organ printing technology. This paper focuses on the ligament flow of the droplet formation process during inkjet printing of bioink containing living cells and its corresponding effect on post-printing cell viability and cell distribution. It is found that (1) two types of ligament flow are observed: at 30 V (Type I), the ligament flow has two different directions at the locations near the nozzle orifice and the forming droplet; at 60 V (Type II), the ligament flow directions are the same at both locations; (2) compared to Type II, fewer cells are ejected into the primary droplets in Type I, because some cells move back into the nozzle driven by the ligament flow in the positive z direction; and (3) cell viability in both Type I and Type II is around 90% without a significant difference. The resulting knowledge will benefit precise control of printing dynamics during inkjet printing of viscoelastic bioink for 3D biofabrication applications.

Towards Automated Large-Scale 3D Phenotyping of Vineyards under Field Conditions

PubMed Central

Rose, Johann Christian; Kicherer, Anna; Wieland, Markus; Klingbeil, Lasse; Töpfer, Reinhard; Kuhlmann, Heiner

2016-01-01

In viticulture, phenotypic data are traditionally collected directly in the field via visual and manual means by an experienced person. This approach is time consuming, subjective and prone to human errors. In recent years, research therefore has focused strongly on developing automated and non-invasive sensor-based methods to increase data acquisition speed, enhance measurement accuracy and objectivity and to reduce labor costs. While many 2D methods based on image processing have been proposed for field phenotyping, only a few 3D solutions are found in the literature. A track-driven vehicle consisting of a camera system, a real-time-kinematic GPS system for positioning, as well as hardware for vehicle control, image storage and acquisition is used to visually capture a whole vine row canopy with georeferenced RGB images. In the first post-processing step, these images were used within a multi-view-stereo software to reconstruct a textured 3D point cloud of the whole grapevine row. A classification algorithm is then used in the second step to automatically classify the raw point cloud data into the semantic plant components, grape bunches and canopy. In the third step, phenotypic data for the semantic objects is gathered using the classification results obtaining the quantity of grape bunches, berries and the berry diameter. PMID:27983669

Towards Automated Large-Scale 3D Phenotyping of Vineyards under Field Conditions.

PubMed

Rose, Johann Christian; Kicherer, Anna; Wieland, Markus; Klingbeil, Lasse; Töpfer, Reinhard; Kuhlmann, Heiner

2016-12-15

In viticulture, phenotypic data are traditionally collected directly in the field via visual and manual means by an experienced person. This approach is time consuming, subjective and prone to human errors. In recent years, research therefore has focused strongly on developing automated and non-invasive sensor-based methods to increase data acquisition speed, enhance measurement accuracy and objectivity and to reduce labor costs. While many 2D methods based on image processing have been proposed for field phenotyping, only a few 3D solutions are found in the literature. A track-driven vehicle consisting of a camera system, a real-time-kinematic GPS system for positioning, as well as hardware for vehicle control, image storage and acquisition is used to visually capture a whole vine row canopy with georeferenced RGB images. In the first post-processing step, these images were used within a multi-view-stereo software to reconstruct a textured 3D point cloud of the whole grapevine row. A classification algorithm is then used in the second step to automatically classify the raw point cloud data into the semantic plant components, grape bunches and canopy. In the third step, phenotypic data for the semantic objects is gathered using the classification results obtaining the quantity of grape bunches, berries and the berry diameter.

Immunoglobulin G elution in protein A chromatography employing the method of chromatofocusing for reducing the co-elution of impurities.

PubMed

Pinto, Nuno D S; Uplekar, Shaunak D; Moreira, Antonio R; Rao, Govind; Frey, Douglas D

2017-01-01

Purification processes for monoclonal Immunoglobulin G (IgG) typically employ protein A chromatography as a capture step to remove most of the impurities. One major concern of the post-protein A chromatography processes is the co-elution of some of the host cell proteins (HCPs) with IgG in the capture step. In this work, a novel method for IgG elution in protein A chromatography that reduces the co-elution of HCPs is presented where a two-step pH gradient is self-formed inside a protein A chromatography column. The complexities involved in using an internally produced pH gradient in a protein A chromatography column employing adsorbed buffering species are discussed though equation-based modeling. Under the conditions employed, ELISA assays show a 60% reduction in the HCPs co-eluting with the IgG fraction when using the method as compared to conventional protein A elution without affecting the IgG yield. Evidence is also obtained which indicates that the amount of leached protein A present in free solution in the purified product is reduced by the new method. Biotechnol. Bioeng. 2017;114: 154-162. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Removal of fluoride, SDS, ammonia and turbidity from semiconductor wastewater by combined electrocoagulation-electroflotation.

PubMed

Aoudj, S; Khelifa, A; Drouiche, N

2017-08-01

Semiconductor industry effluents contain organic and inorganic pollutants, such as sodium dodecyl sulfate (SDS), fluoride and ammonia, at high levels which consists a major environmental issue. A combined EC-EF process is proposed as a post-treatment after precipitation for simultaneous clarification and removal of pollutants. In EC step, a hybrid Fe-Al was used as the soluble anode in order to avoid supplementary EC step. EC-Fe is more suitable for SDS removal; EC-Al is more suitable for fluoride removal, while EC with hybrid Al-Fe makes a good compromise. Clarification and ammonia oxidation were achieved in the EF step. Effects of anodic material, initial pH, current, anion nature, chloride concentration and initial pollutant concentration were studied. The final concentrations may reach 0.27, 6.23 and 0.22 mg L -1 for SDS, fluoride and ammonia respectively. These concentrations are far lower than the correspondent discharge limits. Similarly, the final turbidity was found 4.35 NTU which is lower than 5NTU and the treated water does not need further filtration before discharge. Furthermore, the EC-EF process proves to be sufficiently energy-efficient with less soluble electrode consumption. Copyright © 2017 Elsevier Ltd. All rights reserved.

Post Office Modernization Act of 2009

THOMAS, 111th Congress

Rep. Stupak, Bart [D-MI-1

2009-04-02

House - 07/31/2009 Referred to the Subcommittee on Federal Workforce, Post Office, and the District of Columbia. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Post-fall decision tree development and implementation.

PubMed

Gordon, Bonita M; Wnek, Theresa Frissora; Glorius, Nancy; Hasdorff, Carmen; Shiverski, Joyce; Ginn, Janet

2010-01-01

Care and evaluation after a patient's fall require a number of steps to ensure that appropriate care is given and injury is minimized. Astute and appropriate assessment skills with strategic interventions and communication can minimize the harm from a fall. Post-Fall Decision Guidelines were developed to guide care and treatment and to identify potential complications after a patient has fallen. This systematic approach mobilizes the steps of communication, using the Situation-Background-Assessment-Recommendation (SBAR) format, and guides assessment interventions.

The Composition of the Master Schedule

NASA Technical Reports Server (NTRS)

Thomas, Cynthia C.; Behrend, Dirk; MacMillan, Daniel S.

2010-01-01

Over a period of about four months, the IVS Coordinating Center (IVSCC) each year composes the Master Schedule for the IVS observing program of the next calendar year. The process begins in early July when the IVSCC contacts the IVS Network Stations to request information about available station time as well as holiday and maintenance schedules for the upcoming year. Going through various planning stages and a review process with the IVS Observing Program Committee (OPC), the final version of the Master Schedule is posted by early November. We describe the general steps of the composition and illustrate them with the example of the planning for the Master Schedule of the 2010 observing year.

Building Energy Model Development for Retrofit Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chasar, David; McIlvaine, Janet; Blanchard, Jeremy

2012-09-30

Based on previous research conducted by Pacific Northwest National Laboratory and Florida Solar Energy Center providing technical assistance to implement 22 deep energy retrofits across the nation, 6 homes were selected in Florida and Texas for detailed post-retrofit energy modeling to assess realized energy savings (Chandra et al, 2012). However, assessing realized savings can be difficult for some homes where pre-retrofit occupancy and energy performance are unknown. Initially, savings had been estimated using a HERS Index comparison for these homes. However, this does not account for confounding factors such as occupancy and weather. This research addresses a method to moremore » reliably assess energy savings achieved in deep energy retrofits for which pre-retrofit utility bills or occupancy information in not available. A metered home, Riverdale, was selected as a test case for development of a modeling procedure to account occupancy and weather factors, potentially creating more accurate estimates of energy savings. This “true up” procedure was developed using Energy Gauge USA software and post-retrofit homeowner information and utility bills. The 12 step process adjusts the post-retrofit modeling results to correlate with post-retrofit utility bills and known occupancy information. The “trued” post retrofit model is then used to estimate pre-retrofit energy consumption by changing the building efficiency characteristics to reflect the pre-retrofit condition, but keeping all weather and occupancy-related factors the same. This creates a pre-retrofit model that is more comparable to the post-retrofit energy use profile and can improve energy savings estimates. For this test case, a home for which pre- and post- retrofit utility bills were available was selected for comparison and assessment of the accuracy of the “true up” procedure. Based on the current method, this procedure is quite time intensive. However, streamlined processing spreadsheets or incorporation into existing software tools would improve the efficiency of the process. Retrofit activity appears to be gaining market share, and this would be a potentially valuable capability with relevance to marketing, program management, and retrofit success metrics.« less

Automatic localization of landmark sets in head CT images with regression forests for image registration initialization

NASA Astrophysics Data System (ADS)

Zhang, Dongqing; Liu, Yuan; Noble, Jack H.; Dawant, Benoit M.

2016-03-01

Cochlear Implants (CIs) are electrode arrays that are surgically inserted into the cochlea. Individual contacts stimulate frequency-mapped nerve endings thus replacing the natural electro-mechanical transduction mechanism. CIs are programmed post-operatively by audiologists but this is currently done using behavioral tests without imaging information that permits relating electrode position to inner ear anatomy. We have recently developed a series of image processing steps that permit the segmentation of the inner ear anatomy and the localization of individual contacts. We have proposed a new programming strategy that uses this information and we have shown in a study with 68 participants that 78% of long term recipients preferred the programming parameters determined with this new strategy. A limiting factor to the large scale evaluation and deployment of our technique is the amount of user interaction still required in some of the steps used in our sequence of image processing algorithms. One such step is the rough registration of an atlas to target volumes prior to the use of automated intensity-based algorithms when the target volumes have very different fields of view and orientations. In this paper we propose a solution to this problem. It relies on a random forest-based approach to automatically localize a series of landmarks. Our results obtained from 83 images with 132 registration tasks show that automatic initialization of an intensity-based algorithm proves to be a reliable technique to replace the manual step.

Baby Steps Text: Feasibility Study of an SMS-Based Tool for Tracking Children's Developmental Progress.

PubMed

Suh, Hyewon; Porter, John R; Racadio, Robert; Sung, Yi-Chen; Kientz, Julie A

2016-01-01

To help reach populations of children without consistent Internet access or medical care, we designed and implemented Baby Steps Text, an automated text message-based screening tool. We conducted preliminary user research via storyboarding and prototyping with target populations and then developed a fully functional system. In a one-month deployment study, we evaluated the feasibility of Baby Steps Text with fourteen families. During a one-month study, 13 out of 14 participants were able to learn and use the response structure (yielding 2.88% error rate) and complete a child development screener entirely via text messages. All post-study survey respondents agreed Baby Steps Text was understandable and easy to use, which was also confirmed through post-study interviews. Some survey respondents expressed liking Baby Steps Text because it was easy, quick, convenient to use, and delivered helpful, timely information. Our initial deployment study shows text messaging is a feasible tool for supporting parents in tracking and monitoring their child's development.

REAP (raster e-beam advanced process) using 50-kV raster e-beam system for sub-100-nm node mask technology

NASA Astrophysics Data System (ADS)

Baik, Ki-Ho; Dean, Robert L.; Mueller, Mark; Lu, Maiying; Lem, Homer Y.; Osborne, Stephen; Abboud, Frank E.

2002-07-01

A chemically amplified resist (CAR) process has been recognized as an approach to meet the demanding critical dimension (CD) specifications of 100nm node technology and beyond. Recently, significant effort has been devoted to optimizing CAR materials, which offer the characteristics required for next generation photomask fabrication. In this paper, a process established with a positive-tone CAR from TOK and 50kV MEBES eXara system is discussed. This resist is developed for raster scan 50 kV e-beam systems. It has high contrast, good coating characteristics, good dry etch selectivity, and high environmental stability. The coating process is conducted in an environment with amine concentration less than 2 ppb. A nitrogen environment is provided during plate transfer steps. Resolution using a 60nm writing grid is 90nm line and space patterns. CD linearity is maintained down to 240nm for isolated lines or spaces by applying embedded proximity effect correction (emPEC). Optimizations of post-apply bake (PAB) and post-expose bake (PEB) time, temperature, and uniformity are completed to improve adhesion, coating uniformity, and resolution. A puddle develop process is optimized to improve line edge roughness, edge slope, and resolution. Dry etch process is optimized on a TetraT system to transfer the resist image into the chrome layer with minimum etch bias.

Improving Nutritional Status of Older Persons with Dementia Using a National Preventive Care Program.

PubMed

Johansson, L; Wijk, H; Christensson, L

2017-01-01

The aim of the study was to investigate the outcome of change in body weight associated with use of a structured preventive care process among persons with dementia assessed as at risk of malnutrition or malnourished. The preventive care process is a pedagogical model used in the Senior Alert (SA) quality register, where nutrition is one of the prioritized areas and includes four steps: assessment, analysis of underlying causes, actions performed and outcome. An analysis of data from SA with a pre-post design was performed. The participants were living in ordinary housing or special housing in Sweden. 1912 persons, 65 years and older, registered in both SA and the dementia quality register Svedem were included. A national preventive care program including individualized actions. The Mini Nutritional Assessment-Short Form was used to assess nutritional status at baseline. Body weight was measured during baseline and follow-up (7-106 days after baseline). 74.3% persons were malnourished or at risk of malnutrition. Those at risk of malnutrition or malnourished who were registered in all four steps of the preventive care process, increased in body weight from baseline (Md 60.0 kg) to follow-up (Md 62.0 kg) (p=0.013). In those with incomplete registration no increase in body weight was found. Using all steps in the structured preventive care process seems to improve nutritional status of persons with dementia assessed as at risk of malnutrition or malnourished. This study contributes to the development of evidence-based practice regarding malnutrition and persons with dementia.

a Two-Step Classification Approach to Distinguishing Similar Objects in Mobile LIDAR Point Clouds

NASA Astrophysics Data System (ADS)

He, H.; Khoshelham, K.; Fraser, C.

2017-09-01

Nowadays, lidar is widely used in cultural heritage documentation, urban modeling, and driverless car technology for its fast and accurate 3D scanning ability. However, full exploitation of the potential of point cloud data for efficient and automatic object recognition remains elusive. Recently, feature-based methods have become very popular in object recognition on account of their good performance in capturing object details. Compared with global features describing the whole shape of the object, local features recording the fractional details are more discriminative and are applicable for object classes with considerable similarity. In this paper, we propose a two-step classification approach based on point feature histograms and the bag-of-features method for automatic recognition of similar objects in mobile lidar point clouds. Lamp post, street light and traffic sign are grouped as one category in the first-step classification for their inter similarity compared with tree and vehicle. A finer classification of the lamp post, street light and traffic sign based on the result of the first-step classification is implemented in the second step. The proposed two-step classification approach is shown to yield a considerable improvement over the conventional one-step classification approach.

Inflammasome Priming in Sterile Inflammatory Disease.

PubMed

Patel, Meghana N; Carroll, Richard G; Galván-Peña, Silvia; Mills, Evanna L; Olden, Robin; Triantafilou, Martha; Wolf, Amaya I; Bryant, Clare E; Triantafilou, Kathy; Masters, Seth L

2017-02-01

The inflammasome is a cytoplasmic protein complex that processes interleukins (IL)-1β and IL-18, and drives a form of cell death known as pyroptosis. Oligomerization of this complex is actually the second step of activation, and a priming step must occur first. This involves transcriptional upregulation of pro-IL-1β, inflammasome sensor NLRP3, or the non-canonical inflammasome sensor caspase-11. An additional aspect of priming is the post-translational modification of particular inflammasome constituents. Priming is typically accomplished in vitro using a microbial Toll-like receptor (TLR) ligand. However, it is now clear that inflammasomes are activated during the progression of sterile inflammatory diseases such as atherosclerosis, metabolic disease, and neuroinflammatory disorders. Therefore, it is time to consider the endogenous factors and mechanisms that may prime the inflammasome in these conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hematopoietic progenitor migration to the adult thymus

PubMed Central

Zlotoff, Daniel A.; Bhandoola, Avinash

2010-01-01

While most hematopoietic lineages develop in the bone marrow (BM), T cells uniquely complete their development in the specialized environment of the thymus. Hematopoietic stem cells with long-term self-renewal capacity are not present in the thymus. As a result, continuous T cell development requires that BM-derived progenitors be imported into the thymus throughout adult life. The process of thymic homing begins with the mobilization of progenitors out of the bone marrow, continues with their circulation in the bloodstream, and concludes with their settling in the thymus. This review will discuss each of these steps as they occur in the unirradiated and post-irradiation scenarios, focusing on the molecular mechanisms of regulation. Improved knowledge about these early steps in T cell generation may accelerate the development of new therapeutic options in patients with impaired T cell number or function. PMID:21251013

Social impact assessments: Developing a consolidated conceptual framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arce-Gomez, Antonio, E-mail: aarcegomez@swin.edu.au; Donovan, Jerome D., E-mail: jdonovan@swin.edu.au; Bedggood, Rowan E., E-mail: rbedggood@swin.edu.au

Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focusesmore » on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated.« less

Remotely Sensed Quantitative Drought Risk Assessment in Vulnerable Agroecosystems

NASA Astrophysics Data System (ADS)

Dalezios, N. R.; Blanta, A.; Spyropoulos, N. V.

2012-04-01

Hazard may be defined as a potential threat to humans and their welfare and risk (or consequence) as the probability of a hazard occurring and creating loss. Drought is considered as one of the major natural hazards with significant impact to agriculture, environment, economy and society. This paper deals with drought risk assessment, which the first step designed to find out what the problems are and comprises three distinct steps, namely risk identification, risk management which is not covered in this paper, there should be a fourth step to address the need for feedback and to take post-audits of all risk assessment exercises. In particular, quantitative drought risk assessment is attempted by using statistical methods. For the qualification of drought, the Reconnaissance Drought Index (RDI) is employed, which is a new index based on hydrometeorological parameters, such as precipitation and potential evapotranspiration. The remotely sensed estimation of RDI is based on NOA-AVHRR satellite data for a period of 20 years (1981-2001). The study area is Thessaly, central Greece, which is a drought-prone agricultural region characterized by vulnerable agriculture. Specifically, the undertaken drought risk assessment processes are specified as follows: 1. Risk identification: This step involves drought quantification and monitoring based on remotely sensed RDI and extraction of several features such as severity, duration, areal extent, onset and end time. Moreover, it involves a drought early warning system based on the above parameters. 2. Risk estimation: This step includes an analysis of drought severity, frequency and their relationships. 3. Risk evaluation: This step covers drought evaluation based on analysis of RDI images before and after each drought episode, which usually lasts one hydrological year (12month). The results of these three-step drought assessment processes are considered quite satisfactory in a drought-prone region such as Thessaly in central Greece. Moreover, remote sensing has proven very effective in delineating spatial variability and features in drought monitoring and assessment.

An Updated Review of Tyrosinase Inhibitors

PubMed Central

Chang, Te-Sheng

2009-01-01

Tyrosinase is a multifunctional, glycosylated, and copper-containing oxidase, which catalyzes the first two steps in mammalian melanogenesis and is responsible for enzymatic browning reactions in damaged fruits during post-harvest handling and processing. Neither hyperpigmentation in human skin nor enzymatic browning in fruits are desirable. These phenomena have encouraged researchers to seek new potent tyrosinase inhibitors for use in foods and cosmetics. This article surveys tyrosinase inhibitors newly discovered from natural and synthetic sources. The inhibitory strength is compared with that of a standard inhibitor, kojic acid, and their inhibitory mechanisms are discussed. PMID:19582213

The Galics Project: Virtual Galaxy: from Cosmological N-body Simulations

NASA Astrophysics Data System (ADS)

Guiderdoni, B.

The GalICS project develops extensive semi-analytic post-processing of large cosmological simulations to describe hierarchical galaxy formation. The multiwavelength statistical properties of high-redshift and local galaxies are predicted within the large-scale structures. The fake catalogs and mock images that are generated from the outputs are used for the analysis and preparation of deep surveys. The whole set of results is now available in an on-line database that can be easily queried. The GalICS project represents a first step towards a 'Virtual Observatory of virtual galaxies'.

Effectiveness of a facebook-delivered physical activity intervention for post-partum women: a randomized controlled trial protocol.

PubMed

Kernot, Jocelyn; Olds, Tim; Lewis, Lucy K; Maher, Carol

2013-05-29

Physical activity is reduced during the post-partum period. Facebook is frequently used by Australian mothers, and offers flexibility, high levels of engagement and the ability to disseminate information and advice via social contacts. The Mums Step it Up Program is a newly developed 50 day team-based physical activity intervention delivered via a Facebook app. The program involves post-partum women working in teams of 4-8 friends aiming to achieve 10,000 steps per day measured by a pedometer. Women are encouraged to use the app to log their daily steps and undertake social and supportive interactions with their friends and other participants. This study aims to determine the effectiveness of the Mums Step it Up Program. A sample of 126 women up to 12 months post-partum will be recruited through community-based health and family services. Participants will be randomly allocated into one of three groups: control, pedometer only and the Mums Step it Up Program. Assessments will be completed at baseline, 6 weeks and 6 months. The primary outcome (objective physical activity) and the secondary outcomes (sleep quality and quantity, depressive symptoms, weight and quality of life) will be used to determine the effectiveness of the Mums Step it Up Program compared with the control and pedometer only groups. Analyses will be undertaken on an intention-to-treat-basis using random effects mixed modeling. The effect of theorized mediators (physical activity attitudes, subjective norms and perceived behavioral control) will also be examined. This study will provide information about the potential of a Facebook app for the delivery of health behavior interventions. If this intervention proves to be effective it will be released on a mass scale and promoted to the general public. Australia and New Zealand Clinical Trials Register: ACTRN12613000069752.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bates, Robert; McConnell, Elizabeth

Machining methods across many industries generally require multiple operations to machine and process advanced materials, features with micron precision, and complex shapes. The resulting multiple machining platforms can significantly affect manufacturing cycle time and the precision of the final parts, with a resultant increase in cost and energy consumption. Ultrafast lasers represent a transformative and disruptive technology that removes material with micron precision and in a single step manufacturing process. Such precision results from athermal ablation without modification or damage to the remaining material which is the key differentiator between ultrafast laser technologies and traditional laser technologies or mechanical processes.more » Athermal ablation without modification or damage to the material eliminates post-processing or multiple manufacturing steps. Combined with the appropriate technology to control the motion of the work piece, ultrafast lasers are excellent candidates to provide breakthrough machining capability for difficult-to-machine materials. At the project onset in early 2012, the project team recognized that substantial effort was necessary to improve the application of ultrafast laser and precise motion control technologies (for micromachining difficult-to-machine materials) to further the aggregate throughput and yield improvements over conventional machining methods. The project described in this report advanced these leading-edge technologies thru the development and verification of two platforms: a hybrid enhanced laser chassis and a multi-application testbed.« less

Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology

NASA Astrophysics Data System (ADS)

Towne, Silas; Viswanathan, Vish; Holbery, James; Rieke, Peter

Utilizing drop-on-demand technology, we have successfully fabricated hydrogen-air polymer electrolyte membrane fuel cells (PEMFC), demonstrated some of the processing advantages of this technology and have demonstrated that the performance is comparable to conventionally fabricated membrane electrode assemblies (MEAs). Commercial desktop inkjet printers were used to deposit the active catalyst electrode layer directly from print cartridges onto Nafion ® polymer membranes in the hydrogen form. The layers were well-adhered and withstood simple tape peel, bending and abrasion tests and did so without any post-deposition hot press step. The elimination of this processing step suggests that inkjet-based fabrication or similar processing technologies may provide a route to less expensive large-scale fabrication of PEMFCs. When tested in our experimental apparatus, open circuit voltages up to 0.87 V and power densities of up to 155 mW cm -2 were obtained with a catalyst loading of 0.20 mg Pt cm -2. A commercially available membrane under identical, albeit not optimized test conditions, showed about 7% greater power density. The objective of this work was to demonstrate some of the processing advantages of drop-on-demand technology for fabrication of MEAs. It remains to be determined if inkjet fabrication offers performance advantages or leads to more efficient utilization of expensive catalyst materials.

Sean Michaletz Directors Post Doc Fellow Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Cathy Jean

Predicting climate change effects on plant function is a central challenge of global change biology and a primary mission of DOE. Although increasing temperatures and drought have been associated with reduced growth and increased mortality of plants, accurate prediction of such responses is limited by a lack of process-based theory linking climate and whole-plant physiology. This inability to predict forest mortality can cause significant biases in climate forecasts. One way forward is metabolic scaling theory (MST), which proposes that physiologic rates – from cells to the globe – are governed by the rates of resource distribution through vascular networks andmore » the kinetics of resource utilization by metabolic reactions. MST has traditionally not considered rates of resource acquisition from organism-environment interactions, but it has an ideal mechanistic basis for doing so. As a first step towards integrating these processes, Sean has extended MST to characterize effects of temperature and precipitation on plant growth and ecosystem production. Sean’s post doc fellowship aimed to address a remaining shortcoming in that the new theory does not yet consider the physical processes of resource acquisition, and thus cannot mechanistically predict plant performance in a changing climate.« less

Can pore-clogging by ash explain post-fire runoff?

USGS Publications Warehouse

Stoof, Cathelijne R.; Gevaert, Anouk I.; Baver, Christine; Hassanpour, Bahareh; Morales, Veronica L.; Zhang, Wei; Martin, Deborah; Giri, Shree K.; Steenhuis, Tammo S.

2016-01-01

Ash plays an important role in controlling runoff and erosion processes after wildfire and has frequently been hypothesised to clog soil pores and reduce infiltration. Yet evidence for clogging is incomplete, as research has focussed on identifying the presence of ash in soil; the actual flow processes remain unknown. We conducted laboratory infiltration experiments coupled with microscope observations in pure sands, saturated hydraulic conductivity analysis, and interaction energy calculations, to test whether ash can clog pores (i.e. block pores such that infiltration is hampered and ponding occurs). Although results confirmed previous observations of ash washing into pores, clogging was not observed in the pure sands tested, nor were conditions found for which this does occur. Clogging by means of strong attachment of ash to sand was deemed unlikely given the negative surface charge of the two materials. Ponding due to washing in of ash was also considered improbable given the high saturated conductivity of pure ash and ash–sand mixtures. This first mechanistic step towards analysing ash transport and attachment processes in field soils therefore suggests that pore clogging by ash is unlikely to occur in sands. Discussion is provided on other mechanisms by which ash can affect post-fire hydrology.

Histamine-producing Lactobacillus parabuchneri strains isolated from grated cheese can form biofilms on stainless steel.

PubMed

Diaz, Maria; Del Rio, Beatriz; Sanchez-Llana, Esther; Ladero, Victor; Redruello, Begoña; Fernández, María; Martin, M Cruz; Alvarez, Miguel A

2016-10-01

The consumption of food containing large amounts of histamine can lead to histamine poisoning. Cheese is one of the most frequently involved foods. Histamine, one of the biogenic amines (BAs) exhibiting the highest safety risk, accumulates in food contaminated by microorganisms with histidine decarboxylase activity. The origin of these microorganisms may be very diverse with contamination likely occurring during post-ripening processing, but the microorganisms involved during this manufacturing step have never been identified. The present work reports the isolation of 21 histamine-producing Lactobacillus parabuchneri strains from a histamine-containing grated cheese. PCR revealed that every isolate carried the histidine decarboxylase gene (hdcA). Eight lineages were identified based on the results of genome PFGE restriction analysis plus endonuclease restriction profile analysis of the carried plasmids. Members of all lineages were able to form biofilms on polystyrene and stainless steel surfaces. L. parabuchneri is therefore an undesirable species in the dairy industry; the biofilms it can produce on food processing equipment represent a reservoir of histamine-producing bacteria and thus a source of contamination of post-ripening-processed cheeses. Copyright © 2016 Elsevier Ltd. All rights reserved.

Rules based process window OPC

NASA Astrophysics Data System (ADS)

O'Brien, Sean; Soper, Robert; Best, Shane; Mason, Mark

2008-03-01

As a preliminary step towards Model-Based Process Window OPC we have analyzed the impact of correcting post-OPC layouts using rules based methods. Image processing on the Brion Tachyon was used to identify sites where the OPC model/recipe failed to generate an acceptable solution. A set of rules for 65nm active and poly were generated by classifying these failure sites. The rules were based upon segment runlengths, figure spaces, and adjacent figure widths. 2.1 million sites for active were corrected in a small chip (comparing the pre and post rules based operations), and 59 million were found at poly. Tachyon analysis of the final reticle layout found weak margin sites distinct from those sites repaired by rules-based corrections. For the active layer more than 75% of the sites corrected by rules would have printed without a defect indicating that most rulesbased cleanups degrade the lithographic pattern. Some sites were missed by the rules based cleanups due to either bugs in the DRC software or gaps in the rules table. In the end dramatic changes to the reticle prevented catastrophic lithography errors, but this method is far too blunt. A more subtle model-based procedure is needed changing only those sites which have unsatisfactory lithographic margin.

Expert system for automatically correcting OCR output

NASA Astrophysics Data System (ADS)

Taghva, Kazem; Borsack, Julie; Condit, Allen

1994-03-01

This paper describes a new expert system for automatically correcting errors made by optical character recognition (OCR) devices. The system, which we call the post-processing system, is designed to improve the quality of text produced by an OCR device in preparation for subsequent retrieval from an information system. The system is composed of numerous parts: an information retrieval system, an English dictionary, a domain-specific dictionary, and a collection of algorithms and heuristics designed to correct as many OCR errors as possible. For the remaining errors that cannot be corrected, the system passes them on to a user-level editing program. This post-processing system can be viewed as part of a larger system that would streamline the steps of taking a document from its hard copy form to its usable electronic form, or it can be considered a stand alone system for OCR error correction. An earlier version of this system has been used to process approximately 10,000 pages of OCR generated text. Among the OCR errors discovered by this version, about 87% were corrected. We implement numerous new parts of the system, test this new version, and present the results.

Evaluation of one-step luminescent cyanoacrylate fuming.

PubMed

Khuu, Alicia; Chadwick, Scott; Spindler, Xanthe; Lam, Rolanda; Moret, Sébastien; Roux, Claude

2016-06-01

One-step luminescent cyanoacrylates have recently been introduced as an alternative to the conventional cyanoacrylate fuming methods. These new techniques do not require the application of a luminescent post-treatment in order to enhance cyanoacrylate-developed fingermarks. In this study, three one-step polymer cyanoacrylates: CN Yellow Crystals (Aneval Inc.), PolyCyano UV (Foster+Freeman Ltd.) and PECA Multiband (BVDA), and one monomer cyanoacrylate: Lumikit™ (Crime Scene Technology), were evaluated against a conventional two-step cyanoacrylate fuming method (Cyanobloom (Foster+Freeman Ltd.) with rhodamine 6G stain). The manufacturers' recommended conditions or conditions compatible with the MVC™ 1000/D (Foster+Freeman Ltd.) were assessed with fingermarks aged for up to 8 weeks on non-porous and semi-porous substrates. Under white light, Cyanobloom generally gave better development than the one-step treatments across the substrates. Similarly when viewed under the respective luminescent conditions, Cyanobloom with rhodamine 6G stain resulted in improved contrast against the one-step treatments except on polystyrene, where PolyCyano UV and PECA Multiband gave better visualisation. Rhodamine 6G post-treatment of one-step samples did not significantly enhance the contrast of any of the one-step treatments against Cyanobloom/rhodamine 6G-treated samples. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Generalization of improved step length symmetry from treadmill to overground walking in persons with stroke and hemiparesis†

PubMed Central

Savin, Douglas N.; Morton, Susanne M.; Whitall, Jill

2013-01-01

Objectives Determine whether adaptation to a swing phase perturbation during gait transferred from treadmill to overground walking, the rate of overground deadaptation, and whether overground aftereffects improved step length asymmetry in persons with hemiparetic stroke and gait asymmetry. Methods Ten participants with stroke and hemiparesis and 10 controls walked overground on an instrumented gait mat, adapted gait to a swing phase perturbation on a treadmill, then walked overground on the gait mat again. Outcome measures, primary: overground step length symmetry, rates of treadmill step length symmetry adaptation and overground step length symmetry deadaptation; secondary: overground gait velocity, stride length, and stride cycle duration. Results Step length symmetry aftereffects generalized to overground walking and adapted at a similar rate on the treadmill in both groups. Aftereffects decayed at a slower rate overground in participants with stroke and temporarily improved overground step length asymmetry. Both groups’ overground gait velocity increased post adaptation due to increased stride length and decreased stride duration. Conclusions Stroke and hemiparesis do not impair generalization of step length symmetry changes from adapted treadmill to overground walking, but prolong overground aftereffects. Significance Motor adaptation during treadmill walking may be an effective treatment for improving overground gait asymmetries post-stroke. PMID:24286858

Oxide-based synaptic transistors gated by solution-processed gelatin electrolytes

NASA Astrophysics Data System (ADS)

He, Yinke; Sun, Jia; Qian, Chuan; Kong, Ling-An; Gou, Guangyang; Li, Hongjian

2017-04-01

In human brain, a large number of neurons are connected via synapses. Simulation of the synaptic behaviors using electronic devices is the most important step for neuromorphic systems. In this paper, proton conducting gelatin electrolyte-gated oxide field-effect transistors (FETs) were used for emulating synaptic functions, in which the gate electrode is regarded as pre-synaptic neuron and the channel layer as the post-synaptic neuron. In analogy to the biological synapse, a potential spike can be applied at the gate electrode and trigger ionic motion in the gelatin electrolyte, which in turn generates excitatory post-synaptic current (EPSC) in the channel layer. Basic synaptic behaviors including spike time-dependent EPSC, paired-pulse facilitation (PPF), self-adaptation, and frequency-dependent synaptic transmission were successfully mimicked. Such ionic/electronic hybrid devices are beneficial for synaptic electronics and brain-inspired neuromorphic systems.

Single incision multiport versus conventional laparoscopic inguinal hernia repair: A matched comparison

PubMed Central

Rajapandian, Subbiah; Bhushan, Chittawadagi; Sabnis, Sandeep C.; Jain, Manish; Raj, Palanivelu Praveen; Parathasarthi, Ramakrishnan; Senthilnathan, Palanisamy; Palanivelu, Chinnusamy

2018-01-01

Background: The popularity of single-incision procedures is on the rise as wound cosmesis is increasingly being seen as an important body image-related outcome. In this study, we assess the potential benefits of single-incision multiport laparoscopic totally extra-peritoneal (S-TEP) without using specialised ports or instruments and compare the same with the conventional laparoscopic TEP (C-TEP) surgery in terms of operative time, post-operative pain, complications, cost and cosmesis. Materials and Methods: This is a prospective case-matched study of the patients undergoing S-TEP versus C-TEP from June 2014 to December 2015. Results: Each group had 36 patients. The two groups were comparable in the clinical characteristics. The mean duration of surgery for a unilateral hernia in C-TEP and S-TEP was 45.13 ± 10.58 min and 72.63 ± 15.23 min, respectively. The mean visual analogue scale (VAS) score for pain was significantly higher in S-TEP group at post-operative day (POD) 0 and 1. However, at POD 7, there was no significant difference between the groups. At 1st and 6-week post-surgery, the cosmetic results were significantly better in S-TEP group as compared to C-TEP, however, at 6 months, the scar was highly acceptable in both treatment groups. Conclusion: S-TEP, using conventional laparoscopic instruments, is safe and feasible even in resource challenged setting. However, there is a need to review the indications and advantages of single-incision laparoscopic surgery, as no difference in cosmetic outcome by VAS score in S-TEP versus conventional laparoscopic arm seen by the end of 1 month. PMID:28695883

Example-based learning: comparing the effects of additionally providing three different integrative learning activities on physiotherapy intervention knowledge.

PubMed

Dyer, Joseph-Omer; Hudon, Anne; Montpetit-Tourangeau, Katherine; Charlin, Bernard; Mamede, Sílvia; van Gog, Tamara

2015-03-07

Example-based learning using worked examples can foster clinical reasoning. Worked examples are instructional tools that learners can use to study the steps needed to solve a problem. Studying worked examples paired with completion examples promotes acquisition of problem-solving skills more than studying worked examples alone. Completion examples are worked examples in which some of the solution steps remain unsolved for learners to complete. Providing learners engaged in example-based learning with self-explanation prompts has been shown to foster increased meaningful learning compared to providing no self-explanation prompts. Concept mapping and concept map study are other instructional activities known to promote meaningful learning. This study compares the effects of self-explaining, completing a concept map and studying a concept map on conceptual knowledge and problem-solving skills among novice learners engaged in example-based learning. Ninety-one physiotherapy students were randomized into three conditions. They performed a pre-test and a post-test to evaluate their gains in conceptual knowledge and problem-solving skills (transfer performance) in intervention selection. They studied three pairs of worked/completion examples in a digital learning environment. Worked examples consisted of a written reasoning process for selecting an optimal physiotherapy intervention for a patient. The completion examples were partially worked out, with the last few problem-solving steps left blank for students to complete. The students then had to engage in additional self-explanation, concept map completion or model concept map study in order to synthesize and deepen their knowledge of the key concepts and problem-solving steps. Pre-test performance did not differ among conditions. Post-test conceptual knowledge was higher (P < .001) in the concept map study condition (68.8 ± 21.8%) compared to the concept map completion (52.8 ± 17.0%) and self-explanation (52.2 ± 21.7%) conditions. Post-test problem-solving performance was higher (P < .05) in the self-explanation (63.2 ± 16.0%) condition compared to the concept map study (53.3 ± 16.4%) and concept map completion (51.0 ± 13.6%) conditions. Students in the self-explanation condition also invested less mental effort in the post-test. Studying model concept maps led to greater conceptual knowledge, whereas self-explanation led to higher transfer performance. Self-explanation and concept map study can be combined with worked example and completion example strategies to foster intervention selection.

Orchestrating TRANSP Simulations for Interpretative and Predictive Tokamak Modeling with OMFIT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grierson, B. A.; Yuan, X.; Gorelenkova, M.

TRANSP simulations are being used in the OMFIT work- flow manager to enable a machine independent means of experimental analysis, postdictive validation, and predictive time dependent simulations on the DIII-D, NSTX, JET and C-MOD tokamaks. The procedures for preparing the input data from plasma profile diagnostics and equilibrium reconstruction, as well as processing of the time-dependent heating and current drive sources and assumptions about the neutral recycling, vary across machines, but are streamlined by using a common workflow manager. Settings for TRANSP simulation fidelity are incorporated into the OMFIT framework, contrasting between-shot analysis, power balance, and fast-particle simulations. A previouslymore » established series of data consistency metrics are computed such as comparison of experimental vs. calculated neutron rate, equilibrium stored energy vs. total stored energy from profile and fast-ion pressure, and experimental vs. computed surface loop voltage. Discrepancies between data consistency metrics can indicate errors in input quantities such as electron density profile or Zeff, or indicate anomalous fast-particle transport. Measures to assess the sensitivity of the verification metrics to input quantities are provided by OMFIT, including scans of the input profiles and standardized post-processing visualizations. For predictive simulations, TRANSP uses GLF23 or TGLF to predict core plasma profiles, with user defined boundary conditions in the outer region of the plasma. ITPA validation metrics are provided in post-processing to assess the transport model validity. By using OMFIT to orchestrate the steps for experimental data preparation, selection of operating mode, submission, post-processing and visualization, we have streamlined and standardized the usage of TRANSP.« less

Orchestrating TRANSP Simulations for Interpretative and Predictive Tokamak Modeling with OMFIT

DOE PAGES

Grierson, B. A.; Yuan, X.; Gorelenkova, M.; ...

2018-02-21

TRANSP simulations are being used in the OMFIT work- flow manager to enable a machine independent means of experimental analysis, postdictive validation, and predictive time dependent simulations on the DIII-D, NSTX, JET and C-MOD tokamaks. The procedures for preparing the input data from plasma profile diagnostics and equilibrium reconstruction, as well as processing of the time-dependent heating and current drive sources and assumptions about the neutral recycling, vary across machines, but are streamlined by using a common workflow manager. Settings for TRANSP simulation fidelity are incorporated into the OMFIT framework, contrasting between-shot analysis, power balance, and fast-particle simulations. A previouslymore » established series of data consistency metrics are computed such as comparison of experimental vs. calculated neutron rate, equilibrium stored energy vs. total stored energy from profile and fast-ion pressure, and experimental vs. computed surface loop voltage. Discrepancies between data consistency metrics can indicate errors in input quantities such as electron density profile or Zeff, or indicate anomalous fast-particle transport. Measures to assess the sensitivity of the verification metrics to input quantities are provided by OMFIT, including scans of the input profiles and standardized post-processing visualizations. For predictive simulations, TRANSP uses GLF23 or TGLF to predict core plasma profiles, with user defined boundary conditions in the outer region of the plasma. ITPA validation metrics are provided in post-processing to assess the transport model validity. By using OMFIT to orchestrate the steps for experimental data preparation, selection of operating mode, submission, post-processing and visualization, we have streamlined and standardized the usage of TRANSP.« less

4D-SFM Photogrammetry for Monitoring Sediment Dynamics in a Debris-Flow Catchment: Software Testing and Results Comparison

NASA Astrophysics Data System (ADS)

Cucchiaro, S.; Maset, E.; Fusiello, A.; Cazorzi, F.

2018-05-01

In recent years, the combination of Structure-from-Motion (SfM) algorithms and UAV-based aerial images has revolutionised 3D topographic surveys for natural environment monitoring, offering low-cost, fast and high quality data acquisition and processing. A continuous monitoring of the morphological changes through multi-temporal (4D) SfM surveys allows, e.g., to analyse the torrent dynamic also in complex topography environment like debris-flow catchments, provided that appropriate tools and procedures are employed in the data processing steps. In this work we test two different software packages (3DF Zephyr Aerial and Agisoft Photoscan) on a dataset composed of both UAV and terrestrial images acquired on a debris-flow reach (Moscardo torrent - North-eastern Italian Alps). Unlike other papers in the literature, we evaluate the results not only on the raw point clouds generated by the Structure-from- Motion and Multi-View Stereo algorithms, but also on the Digital Terrain Models (DTMs) created after post-processing. Outcomes show differences between the DTMs that can be considered irrelevant for the geomorphological phenomena under analysis. This study confirms that SfM photogrammetry can be a valuable tool for monitoring sediment dynamics, but accurate point cloud post-processing is required to reliably localize geomorphological changes.

Evaluating remedial alternatives for an acid mine drainage stream: A model post audit

USGS Publications Warehouse

Runkel, Robert L.; Kimball, Briant A.; Walton-Day, Katherine; Verplanck, Philip L.; Broshears, Robert E.

2012-01-01

A post audit for a reactive transport model used to evaluate acid mine drainage treatment systems is presented herein. The post audit is based on a paired synoptic approach in which hydrogeochemical data are collected at low (existing conditions) and elevated (following treatment) pH. Data obtained under existing, low-pH conditions are used for calibration, and the resultant model is used to predict metal concentrations observed following treatment. Predictions for Al, As, Fe, H+, and Pb accurately reproduce the observed reduction in dissolved concentrations afforded by the treatment system, and the information provided in regard to standard attainment is also accurate (predictions correctly indicate attainment or nonattainment of water quality standards for 19 of 25 cases). Errors associated with Cd, Cu, and Zn are attributed to misspecification of sorbent mass (precipitated Fe). In addition to these specific results, the post audit provides insight in regard to calibration and sensitivity analysis that is contrary to conventional wisdom. Steps taken during the calibration process to improve simulations of As sorption were ultimately detrimental to the predictive results, for example, and the sensitivity analysis failed to bracket observed metal concentrations.

Evaluating remedial alternatives for an acid mine drainage stream: a model post audit.

PubMed

Runkel, Robert L; Kimball, Briant A; Walton-Day, Katherine; Verplanck, Philip L; Broshears, Robert E

2012-01-03

A post audit for a reactive transport model used to evaluate acid mine drainage treatment systems is presented herein. The post audit is based on a paired synoptic approach in which hydrogeochemical data are collected at low (existing conditions) and elevated (following treatment) pH. Data obtained under existing, low-pH conditions are used for calibration, and the resultant model is used to predict metal concentrations observed following treatment. Predictions for Al, As, Fe, H(+), and Pb accurately reproduce the observed reduction in dissolved concentrations afforded by the treatment system, and the information provided in regard to standard attainment is also accurate (predictions correctly indicate attainment or nonattainment of water quality standards for 19 of 25 cases). Errors associated with Cd, Cu, and Zn are attributed to misspecification of sorbent mass (precipitated Fe). In addition to these specific results, the post audit provides insight in regard to calibration and sensitivity analysis that is contrary to conventional wisdom. Steps taken during the calibration process to improve simulations of As sorption were ultimately detrimental to the predictive results, for example, and the sensitivity analysis failed to bracket observed metal concentrations.

Assessing the technical efficiency of health posts in rural Guatemala: a data envelopment analysis.

PubMed

Hernández, Alison R; San Sebastián, Miguel

2014-01-01

Strengthening health service delivery to the rural poor is an important means of redressing inequities. Meso-level managers can help enhance efficiency in the utilization of existing resources through the application of practical tools to analyze routinely collected data reflecting inputs and outputs. This study aimed to assess the efficiency and change in productivity of health posts over two years in a rural department of Guatemala. Data envelopment analysis was used to measure health posts' technical efficiency and productivity change for 2008 and 2009. Input/output data were collected from the regional health office of Alta Verapaz for 34 health posts from the 19 districts comprising the health region. Technical efficiency varied widely across health posts, with mean scores of 0.78 (SD=0.24) and 0.75 (SD=0.21) in 2008 and 2009, respectively. Overall, productivity increased by 4%, though 47% of health posts experienced a decline in productivity. Results were combined on a bivariate plot to identify health posts at the high and low extremes of efficiency, which should be followed up to determine how and why their production processes are operating differently. Assessing efficiency using the data that are available at the meso-level can serve as a first step in strengthening performance. Further work is required to support managers in the routine application of efficiency analysis and putting the results to use in guiding efforts to improve service delivery and increase utilization.

Performance criteria and quality indicators for the post-analytical phase.

PubMed

Sciacovelli, Laura; Aita, Ada; Padoan, Andrea; Pelloso, Michela; Antonelli, Giorgia; Piva, Elisa; Chiozza, Maria Laura; Plebani, Mario

2016-07-01

Quality indicators (QIs) used as performance measurements are an effective tool in accurately estimating quality, identifying problems that may need to be addressed, and monitoring the processes over time. In Laboratory Medicine, QIs should cover all steps of the testing process, as error studies have confirmed that most errors occur in the pre- and post-analytical phase of testing. Aim of the present study is to provide preliminary results on QIs and related performance criteria in the post-analytical phase. This work was conducted according to a previously described study design based on the voluntary participation of clinical laboratories in the project on QIs of the Working Group "Laboratory Errors and Patient Safety" (WG-LEPS) of the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC). Overall, data collected highlighted an improvement or stability in performances over time for all reported indicators thus demonstrating that the use of QIs is effective in the quality improvement strategy. Moreover, QIs data are an important source for defining the state-of-the-art concerning the error rate in the total testing process. The definition of performance specifications based on the state-of-the-art, as suggested by consensus documents, is a valuable benchmark point in evaluating the performance of each laboratory. Laboratory tests play a relevant role in the monitoring and evaluation of the efficacy of patient outcome thus assisting clinicians in decision-making. Laboratory performance evaluation is therefore crucial to providing patients with safe, effective and efficient care.

Predictable turn-around time for post tape-out flow

NASA Astrophysics Data System (ADS)

Endo, Toshikazu; Park, Minyoung; Ghosh, Pradiptya

2012-03-01

A typical post-out flow data path at the IC Fabrication has following major components of software based processing - Boolean operations before the application of resolution enhancement techniques (RET) and optical proximity correctin (OPC), the RET and OPC step [etch retargeting, sub-resolution assist feature insertion (SRAF) and OPC], post-OPCRET Boolean operations and sometimes in the same flow simulation based verification. There are two objectives that an IC Fabrication tapeout flow manager wants to achieve with the flow - predictable completion time and fastest turn-around time (TAT). At times they may be competing. There have been studies in the literature modeling the turnaround time from historical data for runs with the same recipe and later using that to derive the resource allocation for subsequent runs. [3]. This approach is more feasible in predominantly simulation dominated tools but for edge operation dominated flow it may not be possible especially if some processing acceleration methods like pattern matching or hierarchical processing is involved. In this paper, we suggest an alternative method of providing target turnaround time and managing the priority of jobs while not doing any upfront resource modeling and resource planning. The methodology then systematically either meets the turnaround time need and potentially lets the user know if it will not as soon as possible. This builds on top of the Calibre Cluster Management (CalCM) resource management work previously published [1][2]. The paper describes the initial demonstration of the concept.

Synthesis of Platinum-nickel Nanowires and Optimization for Oxygen Reduction Performance.

PubMed

Alia, Shaun M; Pivovar, Bryan S

2018-04-27

Platinum-nickel (Pt-Ni) nanowires were developed as fuel cell electrocatalysts, and were optimized for the performance and durability in the oxygen reduction reaction. Spontaneous galvanic displacement was used to deposit Pt layers onto Ni nanowire substrates. The synthesis approach produced catalysts with high specific activities and high Pt surface areas. Hydrogen annealing improved Pt and Ni mixing and specific activity. Acid leaching was used to preferentially remove Ni near the nanowire surface, and oxygen annealing was used to stabilize near-surface Ni, improving durability and minimizing Ni dissolution. These protocols detail the optimization of each post-synthesis processing step, including hydrogen annealing to 250 °C, exposure to 0.1 M nitric acid, and oxygen annealing to 175 °C. Through these steps, Pt-Ni nanowires produced increased activities more than an order of magnitude than Pt nanoparticles, while offering significant durability improvements. The presented protocols are based on Pt-Ni systems in the development of fuel cell catalysts. These techniques have also been used for a variety of metal combinations, and can be applied to develop catalysts for a number of electrochemical processes.

A roadmap for breeding orphan leafy vegetable species: a case study of Gynandropsis gynandra (Cleomaceae).

PubMed

Sogbohossou, E O Deedi; Achigan-Dako, Enoch G; Maundu, Patrick; Solberg, Svein; Deguenon, Edgar M S; Mumm, Rita H; Hale, Iago; Van Deynze, Allen; Schranz, M Eric

2018-01-01

Despite an increasing awareness of the potential of "orphan" or unimproved crops to contribute to food security and enhanced livelihoods for farmers, coordinated research agendas to facilitate production and use of orphan crops by local communities are generally lacking. We provide an overview of the current knowledge on leafy vegetables with a focus on Gynandropsis gynandra , a highly nutritious species used in Africa and Asia, and highlight general and species-specific guidelines for participatory, genomics-assisted breeding of orphan crops. Key steps in genome-enabled orphan leafy vegetables improvement are identified and discussed in the context of Gynandropsis gynandra breeding, including: (1) germplasm collection and management; (2) product target definition and refinement; (3) characterization of the genetic control of key traits; (4) design of the 'process' for cultivar development; (5) integration of genomic data to optimize that 'process'; (6) multi-environmental participatory testing and end-user evaluation; and (7) crop value chain development. The review discusses each step in detail, with emphasis on improving leaf yield, phytonutrient content, organoleptic quality, resistance to biotic and abiotic stresses and post-harvest management.

Spectral phasor analysis of LAURDAN fluorescence in live A549 lung cells to study the hydration and time evolution of intracellular lamellar body-like structures.

PubMed

Malacrida, Leonel; Astrada, Soledad; Briva, Arturo; Bollati-Fogolín, Mariela; Gratton, Enrico; Bagatolli, Luis A

2016-11-01

Using LAURDAN spectral imaging and spectral phasor analysis we concurrently studied the growth and hydration state of subcellular organelles (lamellar body-like, LB-like) from live A549 lung cancer cells at different post-confluence days. Our results reveal a time dependent two-step process governing the size and hydration of these intracellular LB-like structures. Specifically, a first step (days 1 to 7) is characterized by an increase in their size, followed by a second one (days 7 to 14) where the organelles display a decrease in their global hydration properties. Interestingly, our results also show that their hydration properties significantly differ from those observed in well-characterized artificial lamellar model membranes, challenging the notion that a pure lamellar membrane organization is present in these organelles at intracellular conditions. Finally, these LB-like structures show a significant increase in their hydration state upon secretion, suggesting a relevant role of entropy during this process. Copyright © 2016 Elsevier B.V. All rights reserved.

Preliminary Characterization Results from the DebriSat Project

NASA Technical Reports Server (NTRS)

Rivero, M.; Shiotani, B.; Kleespies, J.; Toledo-Burdett, R.; Moraguez, M.; Carrasquila, M.; Fitz-Coy, N.; Liou, J.-C.; Sorge, M.; Huynh, T.

2016-01-01

The DebriSat project is a continuing effort sponsored by NASA and DoD to update existing break-up models using data obtained from two separate hypervelocity impact tests used to simulate on-orbit collisions. To protect the fragments resulting from the impact tests, "soft-catch" arenas made of polyurethane foam panels were utilized. After each impact test, the test chamber was cleaned and debris resulting from the catastrophic demise of the test article were collected and shipped to the University of Florida for post-impact processing. The post-impact processing activities include collecting, characterizing, and cataloging of the fragments. Since the impact tests, a team of students has been working to characterize the fragments in terms of their mass, size, shape, color and material content. The focus of the 20 months since the impact tests has been on the collection of 2 millimeters- and larger fragments resulting from impact test on the 56 kilogram-representative LEO (Low Earth Orbit) satellite referred to as DebriSat. To date we have recovered in excess of 115,000 fragments, 30,000 more than the prediction of 85,000 fragments from the existing model. We continue to collect fragments but have transitioned to the characterization phase of the post-impact activities. Since the start of the characterization phase, the focus has been to utilize automation to (i) expedite fragment characterization process and (ii) minimize human-in-the- loop. We have developed and implemented such automated processes; e.g., we have automated the data entry process to reduce operator errors during transcription of the measurement data. However, at all steps of the process, there is human oversight to ensure the integrity of the data. Additionally, we have developed and implemented repeatability and reproducibility tests to ensure that the instrumentation used in the characterization process is accurate and properly calibrated. In this paper, the implemented processes are described and preliminary results presented. Additionally, lessons learned from the implemented automations and their impacts on the integrity of the results are discussed.

An Urban Resilience to Extreme Weather Events Framework for Development of Post Event Learning and Transformative Adaptation in Cities

NASA Astrophysics Data System (ADS)

Solecki, W. D.; Friedman, E. S.; Breitzer, R.

2016-12-01

Increasingly frequent extreme weather events are becoming an immediate priority for urban coastal practitioners and stakeholders, adding complexity to decisions concerning risk management for short-term action and long-term needs of city climate stakeholders. The conflict between the prioritization of short versus long-term events by decision-makers creates disconnect between climate science and its applications. The Consortium for Climate Risk in the Urban Northeast (CCRUN), a NOAA RISA team, is developing a set of mechanisms to help bridge this gap. The mechanisms are designed to promote the application of climate science on extreme weather events and their aftermath. It is in the post event policy window where significant opportunities for science-policy linkages exist. In particular, CCRUN is interested in producing actionable and useful information for city managers to use in decision-making processes surrounding extreme weather events and climate change. These processes include a sector specific needs assessment survey instrument and two tools for urban coastal practitioners and stakeholders. The tools focus on post event learning and connections between resilience and transformative adaptation. Elements of the two tools are presented. Post extreme event learning supports urban coastal practitioners and decision-makers concerned about maximizing opportunities for knowledge transfer and assimilation, and policy initiation and development following an extreme weather event. For the urban U.S. Northeast, post event learning helps coastal stakeholders build the capacity to adapt to extreme weather events, and inform and develop their planning capacity through analysis of past actions and steps taken in response to Hurricane Sandy. Connecting resilience with transformative adaptation is intended to promote resilience in urban Northeast coastal settings to the long-term negative consequences of extreme weather events. This is done through a knowledge co-production engagement process that links innovative and flexible adaptation pathways that can address requirements for short-term action and long-term needs.

Post-sulfonation of cellulose nanofibrils with a one-step reaction to improve dispersibility

Treesearch

Jeffrey Luo; Nikolay Semenikhin; Huibin Chang; Robert J. Moon; Satish Kumar

2018-01-01

Cellulose nanofibrils (CNF) were sulfonated and the dispersion quality was compared to unfunctionalized and 2,2,6,6-tetramethylpiperdine-1-oxyl radical (TEMPO) post-oxidation treatment of existing CNF (mechanically fibrillated pulp). A post-sulfonation treatment on existing CNF in chlorosulfonic acid and dimethylformamide (DMF) resulted in sulfonated CNF that retained...

Using the TSAR electromagnetic modeling system

NASA Astrophysics Data System (ADS)

Pennock, S. T.; Laguna, G. W.

1993-09-01

A new user, upon receipt of the TSAR EM modeling system, may be overwhelmed by the number of software packages to learn and the number of manuals associated with those packages. This is a document to describe the creation of a simple TSAR model, beginning with an MGED solid and continuing the process through final results from TSAR. It is not intended to be a complete description of all the parts of the TSAR package. Rather, it is intended simply to touch on all the steps in the modeling process and to take a new user through the system from start to finish. There are six basic parts to the TSAR package. The first, MGED, is part of the BRL-CAD package and is used to create a solid model. The second part, ANASTASIA, is the program used to sample the solid model and create a finite-difference mesh. The third program, IMAGE, lets the user view the mesh itself and verify its accuracy. If everything about the mesh is correct, the process continues to the fourth step, SETUP-TSAR, which creates the parameter files for compiling TSAR and the input file for running a particular simulation. The fifth step is actually running TSAR, the field modeling program. Finally, the output from TSAR is placed into SIG, B2RAS or another program for post-processing and plotting. Each of these steps will be described below. The best way to learn to use the TSAR software is to actually create and run a simple test problem. As an example of how to use the TSAR package, let's create a sphere with a rectangular internal cavity, with conical and cylindrical penetrations connecting the outside to the inside, and find the electric field inside the cavity when the object is exposed to a Gaussian plane wave. We will begin with the solid modeling software, MGED, a part of the BRL-CAD modeling release.

Using the TSAR Electromagnetic modeling system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pennock, S.T.; Laguna, G.W.

1993-09-01

A new user, upon receipt of the TSAR EM modeling system, may be overwhelmed by the number of software packages to learn and the number of manuals associated with those packages. This is a document to describe the creation of a simple TSAR model, beginning with an MGED solid and continuing the process through final results from TSAR. It is not intended to be a complete description of all the parts of the TSAR package. Rather, it is intended simply to touch on all the steps in the modeling process and to take a new user through the system frommore » start to finish. There are six basic parts to the TSAR package. The first, MGED, is part of the BRL-CAD package and is used to create a solid model. The second part, ANASTASIA, is the program used to sample the solid model and create a finite -- difference mesh. The third program, IMAGE, lets the user view the mesh itself and verify its accuracy. If everything about the mesh is correct, the process continues to the fourth step, SETUP-TSAR, which creates the parameter files for compiling TSAR and the input file for running a particular simulation. The fifth step is actually running TSAR, the field modeling program. Finally, the output from TSAR is placed into SIG, B2RAS or another program for post-processing and plotting. Each of these steps will be described below. The best way to learn to use the TSAR software is to actually create and run a simple test problem. As an example of how to use the TSAR package, let`s create a sphere with a rectangular internal cavity, with conical and cylindrical penetrations connecting the outside to the inside, and find the electric field inside the cavity when the object is exposed to a Gaussian plane wave. We will begin with the solid modeling software, MGED, a part of the BRL-CAD modeling release.« less

In-gel staining of proteins in native polyacrylamide gel electrophoresis using meso-tetrakis(4-sulfonatophenyl) porphyrin.

PubMed

Divakar, K; Devi, G Nandhini; Gautam, Pennathur

2012-01-01

Protein identification in polyacrylamide gel electrophoresis (PAGE) requires post-electrophoretic steps like fixing, staining, and destaining of the gel, which are time-consuming and cumbersome. A new method for direct visualization of protein bands in PAGE has been developed using meso-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) as a dye without the need for any post-electrophoretic steps; thus, separation and recovery of enzymes become much easier for further analysis. Activity staining was carried out to show that the biochemical activity of the enzymes was preserved after electrophoresis.

Post-GWAS in Psychiatric Genetics: A Developmental Perspective on the "Other" Next Steps.

PubMed

Dick, Danielle M; Barr, Peter B; Cho, Seung Bin; Cooke, Megan E; Kuo, Sally I-Chun; Lewis, Tenesha J; Neale, Zoe; Salvatore, Jessica E; Savage, Jeanne; Su, Jinni

2018-03-01

As psychiatric genetics enters an era where gene identification is finally yielding robust, replicable genetic associations and polygenic risk scores, it is important to consider next steps and delineate how that knowledge will be applied to ultimately ameliorate suffering associated with substance use and psychiatric disorders. Much of the post-genome-wide association study discussion has focused on the potential of genetic information to elucidate the underlying biology and use this information for the development of more effective pharmaceutical treatments. In this review we focus on additional areas of research that should follow gene identification. By taking genetic findings into longitudinal, developmental studies, we can map the pathways by which genetic risk manifests across development, elucidating the early behavioral manifestations of risk, and studying how various environments and interventions moderate that risk across developmental stages. The delineation of risk across development will advance our understanding of mechanism, sex differences and risk and resilience processes in different racial/ethnic groups. Here, we review how the extant twin study literature can be used to guide these efforts. Together, these new lines of research will enable us to develop more informed, tailored prevention and intervention efforts. © 2017 John Wiley & Sons Ltd and International Behavioural and Neural Genetics Society.

Transdifferentiation of myoblasts into osteoblasts - possible use for bone therapy.

PubMed

Lin, Daphne P L; Carnagarin, Revathy; Dharmarajan, Arun; Dass, Crispin R

2017-12-01

Transdifferentiation is defined as the conversion of one cell type to another and is an ever-expanding field with a growing number of cells found to be capable of such a process. To date, the fact remains that there are limited treatment options for fracture healing, osteoporosis and bone repair post-destruction by bone tumours. Hence, this review focuses on the transdifferentiation of myoblast to osteoblast as a means to further understand the transdifferentiation process and to investigate a potential therapeutic option if successful. The potent osteoinductive effects of the bone morphogenetic protein-2 are largely implicated in the transdifferentiation of myoblast to osteoblast. Bone morphogenetic protein-2-induced activation of the Smad1 protein ultimately results in JunB synthesis, the first transcriptional step in myoblast dedifferentiation. The upregulation of the activating protein-1 binding activity triggers the transcription of the runt-related transcription factor 2 gene, a transcription factor that plays a major role in osteoblast differentiation. This potential transdifferentiation treatment may be utilised for dental implants, fracture healing, osteoporosis and bone repair post-destruction by bone tumours. © 2017 Royal Pharmaceutical Society.

Refreshing Rubbers as Customized Photothermal Conversion Materials through Post-Darkening Modeling Production.

PubMed

Li, Ruiting; Wang, Zhen; Han, Peng; He, Yonglin; Zhang, Xiaohong; Wang, Yapei

2017-12-19

Organic conjugated polymers with low energy bandgaps are emerging as a particular class of near-infrared (NIR) photothermal conversion materials. However, these polymers routinely possess high phase transition temperatures due to the rigid skeleton and strong intermolecular interactions. Conjugated polymers can rarely be thermally processed at low temperature, especially below 100 °C. This work formulates a concept of post-darkening modeling production (p-DMP) by which the thermoplastic non-conjugated trans-polyisoprene (TPI) is refreshed into a photothermal conversion material with high light use efficiency. Two steps, including the customizable shaping at low temperature and iodine vapor-tailored "darkening", ensure the ease of preparing photothermal conversion devices with desirable topologies. A few characterizations, with the combination of density functional theory (DFT) calculations, provide reasonable explanations for understanding the "darkening" process of TPI in iodine atmosphere. In particular, the p-DMP is successfully extended to three-dimension (3D) printing, opening an avenue to fabricate personalized photothermal products, for example, a sunlight-directed physiotherapy device for healthcare of articular tissues. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Isolated human and animal stratum corneum as a partial model for the 15 steps of percutaneous absorption: emphasizing decontamination, part II.

PubMed

Hui, Xiaoying; Lamel, Sonia; Qiao, Peter; Maibach, Howard I

2013-03-01

Cutaneously directed chemical warfare agents can elicit significant morbidity and mortality. The optimization of prophylactic and therapeutic interventions counteracting these agents is crucial, and the development of decontamination protocols and methodology of post dermal exposure risk assessments would be additionally applicable to common industrial and consumer dermatotoxicants. Percutaneous (PC) penetration is often considered a simple one-step diffusion process but presently consists of at least 15 steps. The systemic exposure to an agent depends on multiple factors and the second part of this review covers absorption and excretion kinetics, wash and rub effects, skin substantivity and transfer, among others. Importantly, the partitioning behavior and diffusion through the stratum corneum (SC) of a wide physicochemical array of compounds shows that many compounds have approximately the same diffusion coefficient which determines their percutaneous absorption in vivo. After accounting for anatomical variation of the SC, the penetration flux value of a substance depends mainly on its SC/vehicle partition coefficient. Additionally, the SC acts as a 'reservoir' for topically applied molecules, and tape stripping methodology can quantify the remaining chemical in the SC which can predict the total molecular penetration in vivo. The determination of ideal decontamination protocols is of utmost importance to reduce morbidity and mortality. However, even expeditious standard washing procedures post dermal chemical exposure often fails to remove chemicals. The second part of this overview continues to review percutaneous penetration extending insights into the complexities of penetration, decontamination and potential newer assays that may be of practical importance. Copyright © 2012 John Wiley & Sons, Ltd.

Deriving preference order of post-mining land-uses through MLSA framework: application of an outranking technique

NASA Astrophysics Data System (ADS)

Soltanmohammadi, Hossein; Osanloo, Morteza; Aghajani Bazzazi, Abbas

2009-08-01

This study intends to take advantage of a previously developed framework for mined land suitability analysis (MLSA) consisted of economical, social, technical and mine site factors to achieve a partial and also a complete pre-order of feasible post-mining land-uses. Analysis by an outranking multi-attribute decision-making (MADM) technique, called PROMETHEE (preference ranking organization method for enrichment evaluation), was taken into consideration because of its clear advantages on the field of MLSA as compared with MADM ranking techniques. Application of the proposed approach on a mined land can be completed through some successive steps. First, performance of the MLSA attributes is scored locally by each individual decision maker (DM). Then the assigned performance scores are normalized and the deviation amplitudes of non-dominated alternatives are calculated. Weights of the attributes are calculated by another MADM technique namely, analytical hierarchy process (AHP) in a separate procedure. Using the Gaussian preference function beside the weights, the preference indexes of the land-use alternatives are obtained. Calculation of the outgoing and entering flows of the alternatives and one by one comparison of these values will lead to partial pre-order of them and calculation of the net flows, will lead to a ranked preference for each land-use. At the final step, utilizing the PROMETHEE group decision support system which incorporates judgments of all the DMs, a consensual ranking can be derived. In this paper, preference order of post-mining land-uses for a hypothetical mined land has been derived according to judgments of one DM to reveal applicability of the proposed approach.

Stepped and Standard Care for Childhood Trauma: A Pilot Randomized Clinical Trial

ERIC Educational Resources Information Center

Salloum, Alison; Small, Brent J.; Robst, John; Scheeringa, Michael S.; Cohen, Judith A.; Storch, Eric A.

2017-01-01

Objective: This study explored the feasibility of stepped care trauma-focused cognitive behavioral therapy (SC-TF-CBT) relative to TF-CBT with children (aged 8--12). Method: Children (N = 33) with post-traumatic stress symptoms (PTSS) were randomly assigned (2:1) to SC-TF-CBT or TF-CBT. SC-TF-CBT consisted of Step 1, parent-led therapist-assisted…

To study the effect of orbital sling on post operative vision in cases of maxillary carcinoma undergoing total maxillectomy.

PubMed

Shukla, Anirudh; Dudeja, Vivek

2014-06-01

To study effect of orbital sling on post operative vision in cases of maxillary carcinoma undergoing total maxillectomy. All patients with the principal procedure of "total maxillectomy" for histopathologically proven cases of carcinoma maxilla in department of otorhinolaryngology and head-neck surgery, N.S.C.B. medical college, Jabalapur, Madhya Pradesh, India from July 2011 to October 2013 were included. Out of the 20 patients irrespective of whether orbital sling was created or not, maximum number of patients 8 (40 %) showed a 3 step improvement, and maximum improvement seen was up to five steps. Out of the 14 patients in which orbital sling was created maximum number of patients 7 (50 %) showed a 3 step improvement, and maximum improvement seen was up to five steps. Out of the 6 patients in whom orbital sling was not created maximum number of patients 3 (50 %) showed a 2 step improvement, and maximum improvement seen was up to three steps. Infraorbital repair with the help of sling results in better improvement of vision as compared to those in whom sling was not or could not be made with no significant difference on eye movements.

The Adverse Drug Reactions from Patient Reports in Social Media Project: Five Major Challenges to Overcome to Operationalize Analysis and Efficiently Support Pharmacovigilance Process.

PubMed

Bousquet, Cedric; Dahamna, Badisse; Guillemin-Lanne, Sylvie; Darmoni, Stefan J; Faviez, Carole; Huot, Charles; Katsahian, Sandrine; Leroux, Vincent; Pereira, Suzanne; Richard, Christophe; Schück, Stéphane; Souvignet, Julien; Lillo-Le Louët, Agnès; Texier, Nathalie

2017-09-21

Adverse drug reactions (ADRs) are an important cause of morbidity and mortality. Classical Pharmacovigilance process is limited by underreporting which justifies the current interest in new knowledge sources such as social media. The Adverse Drug Reactions from Patient Reports in Social Media (ADR-PRISM) project aims to extract ADRs reported by patients in these media. We identified 5 major challenges to overcome to operationalize the analysis of patient posts: (1) variable quality of information on social media, (2) guarantee of data privacy, (3) response to pharmacovigilance expert expectations, (4) identification of relevant information within Web pages, and (5) robust and evolutive architecture. This article aims to describe the current state of advancement of the ADR-PRISM project by focusing on the solutions we have chosen to address these 5 major challenges. In this article, we propose methods and describe the advancement of this project on several aspects: (1) a quality driven approach for selecting relevant social media for the extraction of knowledge on potential ADRs, (2) an assessment of ethical issues and French regulation for the analysis of data on social media, (3) an analysis of pharmacovigilance expert requirements when reviewing patient posts on the Internet, (4) an extraction method based on natural language processing, pattern based matching, and selection of relevant medical concepts in reference terminologies, and (5) specifications of a component-based architecture for the monitoring system. Considering the 5 major challenges, we (1) selected a set of 21 validated criteria for selecting social media to support the extraction of potential ADRs, (2) proposed solutions to guarantee data privacy of patients posting on Internet, (3) took into account pharmacovigilance expert requirements with use case diagrams and scenarios, (4) built domain-specific knowledge resources embeding a lexicon, morphological rules, context rules, semantic rules, syntactic rules, and post-analysis processing, and (5) proposed a component-based architecture that allows storage of big data and accessibility to third-party applications through Web services. We demonstrated the feasibility of implementing a component-based architecture that allows collection of patient posts on the Internet, near real-time processing of those posts including annotation, and storage in big data structures. In the next steps, we will evaluate the posts identified by the system in social media to clarify the interest and relevance of such approach to improve conventional pharmacovigilance processes based on spontaneous reporting. ©Cedric Bousquet, Badisse Dahamna, Sylvie Guillemin-Lanne, Stefan J Darmoni, Carole Faviez, Charles Huot, Sandrine Katsahian, Vincent Leroux, Suzanne Pereira, Christophe Richard, Stéphane Schück, Julien Souvignet, Agnès Lillo-Le Louët, Nathalie Texier. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 21.09.2017.

Rapid preparation of solution-processed InGaZnO thin films by microwave annealing and photoirradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheong, Heajeong; Ogura, Shintaro; Ushijima, Hirobumi

We fabricated solution-processed indium–gallium–zinc oxide (IGZO) thin-film transistors (TFTs) by microwave (MW) annealing an IGZO precursor film followed by irradiating with vacuum ultraviolet (VUV) light. MW annealing allows more rapid heating of the precursor film than conventional annealing processes using a hot plate or electric oven and promotes the crystallization of IGZO. VUV irradiation was used to reduce the duration and temperature of the post-annealing step. Consequently, the IGZO TFTs fabricated through MW annealing for 5 min and VUV irradiation for 1 min exhibited an on/off current ratio of 10{sup 8} and a field-effect mobility of 0.3 cm{sup 2} V{sup −1} s{supmore » −1}. These results indicate that MW annealing and photoirradiation is an effective combination for annealing solution processed IGZO precursor films to prepare the semiconductor layers of TFTs.« less

Identification of ICF categories relevant for nursing in the situation of acute and early post-acute rehabilitation

PubMed Central

Mueller, Martin; Boldt, Christine; Grill, Eva; Strobl, Ralf; Stucki, Gerold

2008-01-01

Background The recovery of patients after an acute episode of illness or injury depends both on adequate medical treatment and on the early identification of needs for rehabilitation care. The process of early beginning rehabilitation requires efficient communication both between health professionals and the patient in order to effectively address all rehabilitation goals. The currently used nursing taxonomies, however, are not intended for interdisciplinary use and thus may not contribute to efficient rehabilitation management and an optimal patient outcome. The ICF might be the missing link in this communication process. The objective of this study was to identify the categories of the International Classification of Functioning, Disability and Health (ICF) categories relevant for nursing care in the situation of acute and early post-acute rehabilitation. Methods First, in a consensus process, "Leistungserfassung in der Pflege" (LEP) nursing interventions relevant for the situation of acute and early post-acute rehabilitation were selected. Second, in an integrated two-step linking process, two nursing experts derived goals of LEP nursing interventions from their practical knowledge and selected corresponding ICF categories most relevant for patients in acute and post-acute rehabilitation (ICF Core Sets). Results Eighty-seven percent of ICF Core Set categories could be linked to goals of at least one nursing intervention variable of LEP. The ICF categories most frequently linked with LEP nursing interventions were respiration functions, experience of self and time functions and focusing attention. Thirteen percent of ICF Core Set categories could not be linked with LEP nursing interventions. The LEP nursing interventions which were linked with the highest number of different ICF-categories of all were "therapeutic intervention", "patient-nurse communication/information giving" and "mobilising". Conclusion The ICF Core Sets for the acute hospital and early post-acute rehabilitation facilities are highly relevant for rehabilitation nursing. Linking nursing interventions with ICF Core Set categories is a feasible way to analyse nursing. Using the ICF Core Sets to describe goals of nursing interventions both facilitates inter-professional communication and respects patient's needs. The ICF may thus be a useful framework to set nursing intervention goals. PMID:18282288

Exposure to a Rotating Virtual Environment During Treadmill Locomotion Causes Adaptation in Heading Direction

NASA Technical Reports Server (NTRS)

Ruttley, T; Marshburn, A.; Bloomberg, J. J.; Mulavara, A. P.; Richards, J. T.; Nomura, Y.

2005-01-01

The goal of the present study was to investigate the adaptive effects of variation in the direction of optic flow, experienced during linear treadmill walking, on modifying locomotor trajectory. Subjects (n = 30) walked on a motorized linear treadmill at 4.0 kilometers per hour for 24 minutes while viewing the interior of a 3D virtual scene projected onto a screen 1.5 in in front of them. The virtual scene depicted constant self-motion equivalent to either 1) walking around the perimeter of a room to one s left (Rotating Room group) 2) walking down the center of a hallway (Infinite Hallway group). The scene was static for the first 4 minutes, and then constant rate self-motion was simulated for the remaining 20 minutes. Before and after the treadmill locomotion adaptation period, subjects performed five stepping trials where in each trial they marched in place to the beat of a metronome at 90 steps/min while blindfolded in a quiet room. The subject's final heading direction (deg), final X (for-aft, cm) and final Y (medio-lateral, cm) positions were measured for each trial. During the treadmill locomotion adaptation period subject's 3D torso position was measured. We found that subjects in the Rotating Room group as compared to the Infinite Hallway group: 1) showed significantly greater deviation during post exposure testing in the heading direction and Y position opposite to the direction of optic flow experienced during treadmill walking 2) showed a significant monotonically increasing torso yaw angular rotation bias in the direction of optic flow during the treadmill adaptation exposure period. Subjects in both groups showed greater forward translation (in the +X direction) during the post treadmill stepping task that differed significantly from their pre exposure performance. Subjects in both groups reported no perceptual deviation in position during the stepping tasks. We infer that viewing simulated rotary self-motion during treadmill locomotion causes adaptive modification of sensory-motor integration in the control of position and trajectory during locomotion which functionally reflects adaptive changes in the integration of visual, vestibular, and proprioceptive cues. Such an adaptation in the control of position and heading direction during locomotion due to the congruence of sensory information demonstrates the potential for adaptive transfer between sensorimotor systems and suggests a common neural site for the processing and self-motion perception and concurrent adaptation in motor output. This will result in lack of subjects perception of deviation of position and trajectory during the post treadmill step test while blind folded.

Exposure to a Rotating Virtual Environment During Treadmill Locomotion Causes Adaptation in Heading Direction

NASA Technical Reports Server (NTRS)

Mulavara, A. P.; Richards, J. T.; Marshburn, A.; Nomura, Y.; Bloomberg, J. J.

2005-01-01

The goal of the present study was to investigate the adaptive effects of variation in the direction of optic flow, experienced during linear treadmill walking, on modifying locomotor trajectory. Subjects (n = 30) walked on a motorized linear treadmill at 4.0 km/h for 24 minutes while viewing the interior of a 3D virtual scene projected onto a screen 1.5 m in front of them. The virtual scene depicted constant self-motion equivalent to either 1) walking around the perimeter of a room to one s left (Rotating Room group) 2) walking down the center of a hallway (Infinite Hallway group). The scene was static for the first 4 minutes, and then constant rate self-motion was simulated for the remaining 20 minutes. Before and after the treadmill locomotion adaptation period, subjects performed five stepping trials where in each trial they marched in place to the beat of a metronome at 90 steps/min while blindfolded in a quiet room. The subject s final heading direction (deg), final X (for-aft, cm) and final Y (medio-lateral, cm) positions were measured for each trial. During the treadmill locomotion adaptation period subject s 3D torso position was measured. We found that subjects in the Rotating Room group as compared to the Infinite Hallway group: 1) showed significantly greater deviation during post exposure testing in the heading direction and Y position opposite to the direction of optic flow experienced during treadmill walking 2) showed a significant monotonically increasing torso yaw angular rotation bias in the direction of optic flow during the treadmill adaptation exposure period. Subjects in both groups showed greater forward translation (in the +X direction) during the post treadmill stepping task that differed significantly from their pre exposure performance. Subjects in both groups reported no perceptual deviation in position during the stepping tasks. We infer that 3 viewing simulated rotary self-motion during treadmill locomotion causes adaptive modification of sensory-motor integration in the control of position and trajectory during locomotion which functionally reflects adaptive changes in the integration of visual, vestibular, and proprioceptive cues. Such an adaptation in the control of position and heading direction during locomotion due to the congruence of sensory information demonstrates the potential for adaptive transfer between sensorimotor systems and suggests a common neural site for the processing and self-motion perception and concurrent adaptation in motor output. This will result in lack of subjects perception of deviation of position and trajectory during the post treadmill step test while blind folded.

Impact of post-meal and one-time daily exercise in patient with type 2 diabetes mellitus: a randomized crossover study.

PubMed

Pahra, Daizy; Sharma, Nitasha; Ghai, Sandhya; Hajela, Abhishek; Bhansali, Shobhit; Bhansali, Anil

2017-01-01

To evaluate the effectiveness of short-timed post-meal and one-time daily exercise on glycemic control in patients with T2DM. Sixty-four T2DM patients were randomised into crossover design. Group A (n = 32) underwent post-meal exercise (moderate-intensity brisk walking covering 1500-1600 steps for 15 min, starting 15 min after each meal) from d1 to d60 followed by one-time daily exercise (45 min pre-breakfast brisk walking at stretch covering 4500-4800 steps) from d61 to d120, while it was vice versa for the group B (n = 32). The five-point blood glucose profile was performed on d1, d30, d60, d90 and d120, and HbA1c on d1, d60 and d120. Fitness wrist band was used for step-counting to ensure the intensity of exercise and compliance to exercise protocol. Group A patients showed a significant improvement in five point blood glucose profile and HbA1c after performing post-meal exercise (p < 0.001), which was mitigated after switchover to one-time daily exercise (p < 0.001). While, group B patients showed improvement in glucose profile and HbA1c (p < 0.001) after performing post-meal exercise, as compared to one-time daily exercise. Further, on pooled analysis (post-meal versus one-time daily exercise group) the beneficial effect of post-meal exercise on glucose profile and HbA1c was consistent as compared to one time daily exercise and the significance persisted on comparison between the two groups. No hypoglycemic events were noted between the groups during the study period. Post-meal exercise is more effective than routine one-time daily exercise for glycemic control in T2DM patients.

Persistent Polyuria in a Rat Spinal Contusion Model

PubMed Central

Ward, Patricia J.

2012-01-01

Abstract Polyuria contributes to bladder overdistention, which confounds both lower and upper urinary tract management in individuals having a spinal cord injury (SCI). Bladder overdistention post-SCI is one of the most common triggers for autonomic dysreflexia, a potentially life-threatening condition. Post-SCI polyuria is thought to result from loss of vascular tone in the lower extremities, leading to edema and subsequent excess fluid, resulting in polyuria. Mild SCIs that have near complete recovery would therefore be expected to have little to no polyuria, while severe injuries resulting in flaccid limbs and lower extremity edema would be expected to exhibit severe polyuria. Since interventions that may decrease lower extremity edema are recommended to lessen the severity of polyuria, step training (which promotes vascular circulation) was evaluated as a therapy to reduce post-SCI polyuria. In the present study, polyuria was evaluated in mild, moderate, and severe contusive SCI in adult male rats. The animals were housed in metabolic cages for 24-hour periods pre- and post-SCI (to 6 weeks). Urine, feces, food, water, and body weights were collected. Other assessments included residual expressed urine volumes, locomotor scoring, in-cage activity, and lesion histology. SCI produced an immediate increase in 24-hour urine collection, as early as 3 days post-SCI. Approximately 2.6-fold increases in urine collection occurred from weeks 1–6 post-SCI for all injury severities. Even with substantial gains in locomotor and bladder function following a mild SCI, polyuria remained severe. Step training (30 min/day, 6 days/week) did not alleviate polyuria in the moderate SCI contusion group. These results indicate that (1) mild injuries retaining weight-bearing locomotion that should have mild, if any, edema/loss of vascular tone still exhibit severe polyuria, and (2) step training was unable to reduce post-SCI polyuria. Taken together, these results indicate that the current mechanistic hypothesis of post-SCI polyuria may be incomplete. PMID:22708983

Persistent polyuria in a rat spinal contusion model.

PubMed

Ward, Patricia J; Hubscher, Charles H

2012-10-10

Polyuria contributes to bladder overdistention, which confounds both lower and upper urinary tract management in individuals having a spinal cord injury (SCI). Bladder overdistention post-SCI is one of the most common triggers for autonomic dysreflexia, a potentially life-threatening condition. Post-SCI polyuria is thought to result from loss of vascular tone in the lower extremities, leading to edema and subsequent excess fluid, resulting in polyuria. Mild SCIs that have near complete recovery would therefore be expected to have little to no polyuria, while severe injuries resulting in flaccid limbs and lower extremity edema would be expected to exhibit severe polyuria. Since interventions that may decrease lower extremity edema are recommended to lessen the severity of polyuria, step training (which promotes vascular circulation) was evaluated as a therapy to reduce post-SCI polyuria. In the present study, polyuria was evaluated in mild, moderate, and severe contusive SCI in adult male rats. The animals were housed in metabolic cages for 24-hour periods pre- and post-SCI (to 6 weeks). Urine, feces, food, water, and body weights were collected. Other assessments included residual expressed urine volumes, locomotor scoring, in-cage activity, and lesion histology. SCI produced an immediate increase in 24-hour urine collection, as early as 3 days post-SCI. Approximately 2.6-fold increases in urine collection occurred from weeks 1-6 post-SCI for all injury severities. Even with substantial gains in locomotor and bladder function following a mild SCI, polyuria remained severe. Step training (30 min/day, 6 days/week) did not alleviate polyuria in the moderate SCI contusion group. These results indicate that (1) mild injuries retaining weight-bearing locomotion that should have mild, if any, edema/loss of vascular tone still exhibit severe polyuria, and (2) step training was unable to reduce post-SCI polyuria. Taken together, these results indicate that the current mechanistic hypothesis of post-SCI polyuria may be incomplete.

A concept-based interactive biomedical image retrieval approach using visualness and spatial information

NASA Astrophysics Data System (ADS)

Rahman, Md M.; Antani, Sameer K.; Demner-Fushman, Dina; Thoma, George R.

2015-03-01

This paper presents a novel approach to biomedical image retrieval by mapping image regions to local concepts and represent images in a weighted entropy-based concept feature space. The term concept refers to perceptually distinguishable visual patches that are identified locally in image regions and can be mapped to a glossary of imaging terms. Further, the visual significance (e.g., visualness) of concepts is measured as Shannon entropy of pixel values in image patches and is used to refine the feature vector. Moreover, the system can assist user in interactively select a Region-Of-Interest (ROI) and search for similar image ROIs. Further, a spatial verification step is used as a post-processing step to improve retrieval results based on location information. The hypothesis that such approaches would improve biomedical image retrieval, is validated through experiments on a data set of 450 lung CT images extracted from journal articles from four different collections.

Oncology Modeling for Fun and Profit! Key Steps for Busy Analysts in Health Technology Assessment.

PubMed

Beca, Jaclyn; Husereau, Don; Chan, Kelvin K W; Hawkins, Neil; Hoch, Jeffrey S

2018-01-01

In evaluating new oncology medicines, two common modeling approaches are state transition (e.g., Markov and semi-Markov) and partitioned survival. Partitioned survival models have become more prominent in oncology health technology assessment processes in recent years. Our experience in conducting and evaluating models for economic evaluation has highlighted many important and practical pitfalls. As there is little guidance available on best practices for those who wish to conduct them, we provide guidance in the form of 'Key steps for busy analysts,' who may have very little time and require highly favorable results. Our guidance highlights the continued need for rigorous conduct and transparent reporting of economic evaluations regardless of the modeling approach taken, and the importance of modeling that better reflects reality, which includes better approaches to considering plausibility, estimating relative treatment effects, dealing with post-progression effects, and appropriate characterization of the uncertainty from modeling itself.

Alcohol and drug treatment involvement, 12-step attendance and abstinence: 9-year cross-lagged analysis of adults in an integrated health plan.

PubMed

Witbrodt, Jane; Ye, Yu; Bond, Jason; Chi, Felicia; Weisner, Constance; Mertens, Jennifer

2014-04-01

This study explored causal relationships between post-treatment 12-step attendance and abstinence at multiple data waves and examined indirect paths leading from treatment initiation to abstinence 9-years later. Adults (N = 1945) seeking help for alcohol or drug use disorders from integrated healthcare organization outpatient treatment programs were followed at 1-, 5-, 7- and 9-years. Path modeling with cross-lagged partial regression coefficients was used to test causal relationships. Cross-lagged paths indicated greater 12-step attendance during years 1 and 5 and were casually related to past-30-day abstinence at years 5 and 7 respectfully, suggesting 12-step attendance leads to abstinence (but not vice versa) well into the post-treatment period. Some gender differences were found in these relationships. Three significant time-lagged, indirect paths emerged linking treatment duration to year-9 abstinence. Conclusions are discussed in the context of other studies using longitudinal designs. For outpatient clients, results reinforce the value of lengthier treatment duration and 12-step attendance in year 1. Copyright © 2014 Elsevier Inc. All rights reserved.

The effect of a school-based active commuting intervention on children's commuting physical activity and daily physical activity.

PubMed

McMinn, David; Rowe, David A; Murtagh, Shemane; Nelson, Norah M

2012-05-01

To investigate the effect of a school-based intervention called Travelling Green (TG) on children's walking to and from school and total daily physical activity. A quasi-experiment with 166 Scottish children (8-9 years) was conducted in 2009. One group (n=79) received TG and another group (n=87) acted as a comparison. The intervention lasted 6 weeks and consisted of educational lessons and goal-setting tasks. Steps and MVPA (daily, a.m. commute, p.m. commute, and total commute) were measured for 5 days pre- and post-intervention using accelerometers. Mean steps (daily, a.m., p.m., and total commute) decreased from pre- to post-intervention in both groups (TG by 901, 49, 222, and 271 steps/day and comparison by 2528, 205, 120, and 325 steps/day, respectively). No significant group by time interactions were found for a.m., p.m., and total commuting steps. A medium (partial eta squared=0.09) and significant (p<0.05) group by time interaction was found for total daily steps. MVPA results were similar to step results. TG has a little effect on walking to and from school. However, for total daily steps and daily MVPA, TG results in a smaller seasonal decrease than for children who do not receive the intervention. Copyright © 2012 Elsevier Inc. All rights reserved.

Thermal Modeling and Simulation of Electron Beam Melting for Rapid Prototyping on Ti6Al4V Alloys

NASA Astrophysics Data System (ADS)

Neira Arce, Alderson

To be a viable solution for contemporary engineering challenges, the use of titanium alloys in a wider range of applications requires the development of new techniques and processes that are able to decrease production cost and delivery times. As a result, the use of material consolidation in a near-net-shape fashion, using dynamic techniques like additive manufacturing by electron beam selective melting EBSM represents a promising method for part manufacturing. However, a new product material development can be cost prohibitive, requiring the use of computer modeling and simulation as a way to decrease turnaround time. To ensure a proper representation of the EBSM process, a thermophysical material characterization and comparison was first performed on two Ti6Al4V powder feedstock materials prepared by plasma (PREP) and gas atomized (GA) processes. This evaluation comprises an evaluation on particle size distribution, density and powder surface area, collectively with the temperature dependence on properties such as heat capacity, thermal diffusivity, thermal conductivity and surface emissivity. Multiple techniques were employed in this evaluation, including high temperature differential scanning calorimetry (HT-DSC), laser flash analysis (LFA), infrared remote temperature analysis (IR-Thermography), laser diffraction, liquid and gas pycnometry using mercury and krypton adsorption respectively. This study was followed by the review of complementary strategies to simulate the temperature evolution during the EBSM process, using a finite element analysis package called COMSOL Multiphysics. Two alternatives dedicated to representing a moving heat source (electron beam) and the powder bed were developed using a step-by-step approximation initiative. The first method consisted of the depiction of a powder bed discretized on an array of domains, each one representing a static melt pool, where the moving heat source was illustrated by a series of time dependant selective heating and cooling steps. The second method consisted of the solution of a prescribed domain, where each powder layer is discretized by an individual 3D element and the heat source is represented by a 1D element displaced by a temperature-coupling extrapolation routine. Two validation strategies were presented here; the first was used to confirm the accuracy of the proposed model strategy by setting up a controlled experiment; the second was used to validate the post-processing data obtained by the simulation by comparison with in-situ measured EBSM process temperature. Finally, a post-process part evaluation on surface finishing and part porosity was discussed including an assessment of the use of non-destructive inspection techniques such as 3D profilometry by axial chromatism for surface roughness, partial section analysis by serial block-face scanning electron microscopy (SBFSEM) and micro computed tomography (CT-Scan) for pore and inclusion detection.

RNA Framework: an all-in-one toolkit for the analysis of RNA structures and post-transcriptional modifications.

PubMed

Incarnato, Danny; Morandi, Edoardo; Simon, Lisa Marie; Oliviero, Salvatore

2018-06-09

RNA is emerging as a key regulator of a plethora of biological processes. While its study has remained elusive for decades, the recent advent of high-throughput sequencing technologies provided the unique opportunity to develop novel techniques for the study of RNA structure and post-transcriptional modifications. Nonetheless, most of the required downstream bioinformatics analyses steps are not easily reproducible, thus making the application of these techniques a prerogative of few laboratories. Here we introduce RNA Framework, an all-in-one toolkit for the analysis of most NGS-based RNA structure probing and post-transcriptional modification mapping experiments. To prove the extreme versatility of RNA Framework, we applied it to both an in-house generated DMS-MaPseq dataset, and to a series of literature available experiments. Notably, when starting from publicly available datasets, our software easily allows replicating authors' findings. Collectively, RNA Framework provides the most complete and versatile toolkit to date for a rapid and streamlined analysis of the RNA epistructurome. RNA Framework is available for download at: http://www.rnaframework.com.

Materials Characterization of Additively Manufactured Components for Rocket Propulsion

NASA Technical Reports Server (NTRS)

Carter, Robert; Draper, Susan; Locci, Ivan; Lerch, Bradley; Ellis, David; Senick, Paul; Meyer, Michael; Free, James; Cooper, Ken; Jones, Zachary

2015-01-01

To advance Additive Manufacturing (AM) technologies for production of rocket propulsion components the NASA Glenn Research Center (GRC) is applying state of the art characterization techniques to interrogate microstructure and mechanical properties of AM materials and components at various steps in their processing. The materials being investigated for upper stage rocket engines include titanium, copper, and nickel alloys. Additive manufacturing processes include laser powder bed, electron beam powder bed, and electron beam wire fed processes. Various post build thermal treatments, including Hot Isostatic Pressure (HIP), have been studied to understand their influence on microstructure, mechanical properties, and build density. Micro-computed tomography, electron microscopy, and mechanical testing in relevant temperature environments has been performed to develop relationships between build quality, microstructure, and mechanical performance at temperature. A summary of GRC's Additive Manufacturing roles and experimental findings will be presented.

Material Characterization of Additively Manufactured Components for Rocket Propulsion

NASA Technical Reports Server (NTRS)

Carter, Robert; Draper, Susan; Locci, Ivan; Lerch, Bradley; Ellis, David; Senick, Paul; Meyer, Michael; Free, James; Cooper, Ken; Jones, Zachary

2015-01-01

To advance Additive Manufacturing (AM) technologies for production of rocket propulsion components the NASA Glenn Research Center (GRC) is applying state of the art characterization techniques to interrogate microstructure and mechanical properties of AM materials and components at various steps in their processing. The materials being investigated for upper stage rocket engines include titanium, copper, and nickel alloys. Additive manufacturing processes include laser powder bed, electron beam powder bed, and electron beam wire fed processes. Various post build thermal treatments, including Hot Isostatic Pressure (HIP), have been studied to understand their influence on microstructure, mechanical properties, and build density. Micro-computed tomography, electron microscopy, and mechanical testing in relevant temperature environments has been performed to develop relationships between build quality, microstructure, and mechanical performance at temperature. A summary of GRCs Additive Manufacturing roles and experimental findings will be presented.

Post-modelling of images from a laser-induced wavy boiling front

NASA Astrophysics Data System (ADS)

Matti, R. S.; Kaplan, A. F. H.

2015-12-01

Processes like laser keyhole welding, remote fusion laser cutting or laser drilling are governed by a highly dynamic wavy boiling front that was recently recorded by ultra-high speed imaging. A new approach has now been established by post-modelling of the high speed images. Based on the image greyscale and on a cavity model the three-dimensional front topology is reconstructed. As a second step the Fresnel absorptivity modulation across the wavy front is calculated, combined with the local projection of the laser beam. Frequency polygons enable additional analysis of the statistical variations of the properties across the front. Trends like shadow formation and time dependency can be studied, locally and for the whole front. Despite strong topology modulation in space and time, for lasers with 1 μm wavelength and steel the absorptivity is bounded to a narrow range of 35-43%, owing to its Fresnel characteristics.

Protein prenylation: a new mode of host-pathogen interaction.

PubMed

Amaya, Moushimi; Baranova, Ancha; van Hoek, Monique L

2011-12-09

Post translational modifications are required for proteins to be fully functional. The three step process, prenylation, leads to farnesylation or geranylgeranylation, which increase the hydrophobicity of the prenylated protein for efficient anchoring into plasma membranes and/or organellar membranes. Prenylated proteins function in a number of signaling and regulatory pathways that are responsible for basic cell operations. Well characterized prenylated proteins include Ras, Rac and Rho. Recently, pathogenic prokaryotic proteins, such as SifA and AnkB, have been shown to be prenylated by eukaryotic host cell machinery, but their functions remain elusive. The identification of other bacterial proteins undergoing this type of host-directed post-translational modification shows promise in elucidating host-pathogen interactions to develop new therapeutics. This review incorporates new advances in the study of protein prenylation into a broader aspect of biology with a focus on host-pathogen interaction. Copyright © 2011 Elsevier Inc. All rights reserved.

Restoration handbook for sagebrush steppe ecosystems with emphasis on greater sage-grouse habitat—Part 3. Site level restoration decisions

USGS Publications Warehouse

Pyke, David A.; Chambers, Jeanne C.; Pellant, Mike; Miller, Richard F.; Beck, Jeffrey L.; Doescher, Paul S.; Roundy, Bruce A.; Schupp, Eugene W.; Knick, Steven T.; Brunson, Mark; McIver, James D.

2017-02-14

Sagebrush steppe ecosystems in the United States currently (2016) occur on only about one-half of their historical land area because of changes in land use, urban growth, and degradation of land, including invasions of non-native plants. The existence of many animal species depends on the existence of sagebrush steppe habitat. The greater sage-grouse (Centrocercus urophasianus) depends on large landscapes of intact habitat of sagebrush and perennial grasses for their existence. In addition, other sagebrush-obligate animals have similar requirements and restoration of landscapes for greater sage-grouse also will benefit these animals. Once sagebrush lands are degraded, they may require restoration actions to make those lands viable habitat for supporting sagebrush-obligate animals, livestock, and wild horses, and to provide ecosystem services for humans now and for future generations.When a decision is made on where restoration treatments should be applied, there are a number of site-specific decisions managers face before selecting the appropriate type of restoration. This site-level decision tool for restoration of sagebrush steppe ecosystems is organized in nine steps.Step 1 describes the process of defining site-level restoration objectives.Step 2 describes the ecological site characteristics of the restoration site. This covers soil chemistry and texture, soil moisture and temperature regimes, and the vegetation communities the site is capable of supporting.Step 3 compares the current vegetation to the plant communities associated with the site State and Transition models.Step 4 takes the manager through the process of current land uses and past disturbances that may influence restoration success.Step 5 is a brief discussion of how weather before and after treatments may impact restoration success.Step 6 addresses restoration treatment types and their potential positive and negative impacts on the ecosystem and on habitats, especially for greater sage-grouse. We discuss when passive restoration options may be sufficient and when active restoration may be necessary to achieve restoration objectives.Step 7 addresses decisions regarding post-restoration livestock grazing management.Step 8 addresses monitoring of the restoration; we discuss important aspects associated with implementation monitoring as well as effectiveness monitoring.Step 9 takes the information learned from monitoring to determine how restoration actions in the future might be adapted to improve restoration success.

Uncovering the Role of RNA-Binding Proteins in Gene Expression in the Immune System.

PubMed

Díaz-Muñoz, Manuel D; Turner, Martin

2018-01-01

Fighting external pathogens requires an ever-changing immune system that relies on tight regulation of gene expression. Transcriptional control is the first step to build efficient responses while preventing immunodeficiencies and autoimmunity. Post-transcriptional regulation of RNA editing, location, stability, and translation are the other key steps for final gene expression, and they are all controlled by RNA-binding proteins (RBPs). Nowadays we have a deep understanding of how transcription factors control the immune system but recent evidences suggest that post-transcriptional regulation by RBPs is equally important for both development and activation of immune responses. Here, we review current knowledge about how post-transcriptional control by RBPs shapes our immune system and discuss the perspective of RBPs being the key players of a hidden immune cell epitranscriptome.

Impact of different post-harvest processing methods on the chemical compositions of peony root.

PubMed

Zhu, Shu; Shirakawa, Aimi; Shi, Yanhong; Yu, Xiaoli; Tamura, Takayuki; Shibahara, Naotoshi; Yoshimatsu, Kayo; Komatsu, Katsuko

2018-06-01

The impact of key processing steps such as boiling, peeling, drying and storing on chemical compositions and morphologic features of the produced peony root was investigated in detail by applying 15 processing methods to fresh roots of Paeonia lactiflora and then monitoring contents of eight main components, as well as internal root color. The results showed that low temperature (4 °C) storage of fresh roots for approximately 1 month after harvest resulted in slightly increased and stable content of paeoniflorin, which might be due to suppression of enzymatic degradation. This storage also prevented roots from discoloring, facilitating production of favorable bright color roots. Boiling process triggered decomposition of polygalloylglucoses, thereby leading to a significant increase in contents of pentagalloylglucose and gallic acid. Peeling process resulted in a decrease of albiflorin and catechin contents. As a result, an optimized and practicable processing method ensuring high contents of the main active components in the produced root was developed.

77 FR 1091 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-09

...This document informs the public that an appeal of the closing of the Alvord, Iowa post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners, and others to take appropriate action.

77 FR 2099 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

...This document informs the public that an appeal of the closing of the Hope, Minnesota post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners, and others to take appropriate action.

76 FR 78702 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... p.m., Eastern Time. See the Procedural Schedule in the SUPPLEMENTARY INFORMATION section for other... the closing of the Sherwood, Michigan post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners...

Investigating the real translucency of the endodontic fiber posts

NASA Astrophysics Data System (ADS)

Camilotti, Fernando; Bonardi, Cláudia; Somer, Aloisi; Novatski, Andressa; Szesz, Anna Luiza; Loguércio, Alessandro Dourado; Kniphoff da Cruz, Gerson

2018-02-01

Researchers have been investigating the light intensity scattered by a translucent fiber post with application in dentistry by different methods. In this work, we introduce a new system capable to record a light scattered profile, step-by-step, as a function of the length of the translucent fiber post. To support our studies, an extensive characterization of the system was carried out and this is presented and discussed here. The system was implemented using the phase sensitive detection. The equipment measures the light scattered without the need of any preparing parts and the fiber post is fixed directly in the fiber post holder becoming ready for measurement. Measures can be recorded with a spatial resolution smaller than 0.01 mm throughout the length of the fiber post being investigated. The system was implemented by using a photomultiplier tube that improves sensitivity for the optical detection. The recorded result is a signal directly proportional to the scattered light and it allows us to obtain a normalized profile that can be used as a map of the scattered light of the fiber post in study. Furthermore, we are able to demonstrate a low intensity of light in the tip region of the fiber post, along with the dependency of the light attenuation with the fiber post body volume and shape. This new system will certainly contribute to achieve better results in fiber post designing and in restoration of endodontic treated teeth because it provides a more well-founded choice of the fiber post to be used, and of the time of exposure to the curing light.

Donor-π-Acceptor Polymer with Alternating Triarylborane and Triphenylamine Moieties.

PubMed

Li, Haiyan; Jäkle, Frieder

2010-05-12

A luminescent main chain donor-π-acceptor-type polymer (4) was prepared via organometallic polycondensation reaction followed by post modification. With both electron-rich amine and electron-deficient borane moieties embedded in the main chain, 4 exhibits an interesting ambipolar character: it can be reduced and oxidized electrochemically at moderate potentials and shows a strong solvatochromic effect in the emission spectra. Complexation studies show that 4 selectively binds to fluoride and cyanide; quantitative titration with cyanide reveals a two-step binding process. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

VisTrails SAHM: visualization and workflow management for species habitat modeling

USGS Publications Warehouse

Morisette, Jeffrey T.; Jarnevich, Catherine S.; Holcombe, Tracy R.; Talbert, Colin B.; Ignizio, Drew A.; Talbert, Marian; Silva, Claudio; Koop, David; Swanson, Alan; Young, Nicholas E.

2013-01-01

The Software for Assisted Habitat Modeling (SAHM) has been created to both expedite habitat modeling and help maintain a record of the various input data, pre- and post-processing steps and modeling options incorporated in the construction of a species distribution model through the established workflow management and visualization VisTrails software. This paper provides an overview of the VisTrails:SAHM software including a link to the open source code, a table detailing the current SAHM modules, and a simple example modeling an invasive weed species in Rocky Mountain National Park, USA.

Assessing the technical efficiency of health posts in rural Guatemala: a data envelopment analysis

PubMed Central

Hernández, Alison R.; Sebastián, Miguel San

2014-01-01

Introduction Strengthening health service delivery to the rural poor is an important means of redressing inequities. Meso-level managers can help enhance efficiency in the utilization of existing resources through the application of practical tools to analyze routinely collected data reflecting inputs and outputs. This study aimed to assess the efficiency and change in productivity of health posts over two years in a rural department of Guatemala. Methods Data envelopment analysis was used to measure health posts’ technical efficiency and productivity change for 2008 and 2009. Input/output data were collected from the regional health office of Alta Verapaz for 34 health posts from the 19 districts comprising the health region. Results Technical efficiency varied widely across health posts, with mean scores of 0.78 (SD=0.24) and 0.75 (SD=0.21) in 2008 and 2009, respectively. Overall, productivity increased by 4%, though 47% of health posts experienced a decline in productivity. Results were combined on a bivariate plot to identify health posts at the high and low extremes of efficiency, which should be followed up to determine how and why their production processes are operating differently. Conclusions Assessing efficiency using the data that are available at the meso-level can serve as a first step in strengthening performance. Further work is required to support managers in the routine application of efficiency analysis and putting the results to use in guiding efforts to improve service delivery and increase utilization. PMID:24461356

Hybrid strategy for increasing fusion performance and stagnation pressure in x-ray driven inertially confined fusion implosions on the NIF

NASA Astrophysics Data System (ADS)

Hurricane, O. A.; Callahan, D. A.; Edwards, M. J.; Casey, D.; Doeppner, T.; Hohenberger, M.; Hinkel, D.; Berzak Hopkins, L.; Le Pape, S.; MacLaren, S.; Masse, L.; Thomas, C.; Zylstra, A.

2017-10-01

Post NIC (2012), more stable and lower convergence implosions were developed and used as part of a `basecamp' strategy to identify obstacles to further performance. From 2013-2015 by probing away from a conservative working implosion in-steps towards conditions of higher velocity and compression, `Fuel Gain' and alpha-heating were obtained. In the process, performance cliffs unrelated to `mix' were identified the most impactful of which were symmetry control of the implosion and hydro seeded by engineering features. From 2015-2017 we focused on mitigating poor symmetry control and engineering improvements on fill-tubes and capsule mounting techniques. The results were more efficient implosions that can obtain the same performance levels as the earlier implosions, but with less laser energy. Presently, the best of these implosions is poised to step into a burning plasma state. Here, we describe the next step in our strategy that involves using the data we've acquired across parameter space to make a step to the largest symmetric implosions that can be fielded on NIF with the energy available. We describe the key principles that form the foundation of this approach. Performed under the auspices of U.S. Dept. of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Will learning to solve one-step equations pose a challenge to 8th grade students?

NASA Astrophysics Data System (ADS)

Ngu, Bing Hiong; Phan, Huy P.

2017-08-01

Assimilating multiple interactive elements simultaneously in working memory to allow understanding to occur, while solving an equation, would impose a high cognitive load. Element interactivity arises from the interaction between elements within and across operational and relational lines. Moreover, operating with special features (e.g. negative pronumeral) poses additional challenge to master equation solving skills. In an experiment, 41 8th grade students (girls = 16, boys = 25) sat for a pre-test, attended a session about equation solving, completed an acquisition phase which constituted the main intervention and were tested again in a post-test. The results showed that at post-test, students performed better on one-step equations tapping low rather than high element interactivity knowledge. In addition, students performed better on those one-step equations that contained no special features. Thus, both the degree of element interactivity and the operation with special features affect the challenge posed to 8th grade students on learning how to solve one-step equations.

Inquiry-Based Science and Technology Enrichment Program for Middle School-Aged Female Students

NASA Astrophysics Data System (ADS)

Kim, Hanna

2016-04-01

This study investigates the effects of an intensive 1-week Inquiry-Based Science and Technology Enrichment Program (InSTEP) designed for middle school-aged female students. InSTEP uses a guided/open inquiry approach that is deepened and redefined as eight sciences and engineering practices in the Next Generation Science Standards, which aimed at increasing female students' interest in science and science-related careers. This study examined the effectiveness of InSTEP on 123 female students' pre-assessment and post-assessment changes in attitudes toward science and content knowledge of selected science concepts. An attitude survey, a science content test with multiple-choice questions, written assignments, and interviews to collect data were all used to measure students' attitudes and content knowledge. A within-group, repeated measure design was conducted, and the results indicated that at the post-intervention level, InSTEP increased the participants' positive attitudes toward science, science-related careers, and content knowledge of selected science concepts.

Determination of post-shakedown quantities of a pipe bend via the simplified theory of plastic zones compared with load history dependent incremental analysis

NASA Astrophysics Data System (ADS)

Vollrath, Bastian; Hübel, Hartwig

2018-01-01

The Simplified Theory of Plastic Zones (STPZ) may be used to determine post-shakedown quantities such as strain ranges and accumulated strains at plastic or elastic shakedown. The principles of the method are summarized. Its practical applicability is shown by the example of a pipe bend subjected to constant internal pressure along with cyclic in-plane bending or/and cyclic radial temperature gradient. The results are compared with incremental analyses performed step-by-step throughout the entire load history until the state of plastic shakedown is achieved.

a Novel Approach of Indexing and Retrieving Spatial Polygons for Efficient Spatial Region Queries

NASA Astrophysics Data System (ADS)

Zhao, J. H.; Wang, X. Z.; Wang, F. Y.; Shen, Z. H.; Zhou, Y. C.; Wang, Y. L.

2017-10-01

Spatial region queries are more and more widely used in web-based applications. Mechanisms to provide efficient query processing over geospatial data are essential. However, due to the massive geospatial data volume, heavy geometric computation, and high access concurrency, it is difficult to get response in real time. Spatial indexes are usually used in this situation. In this paper, based on k-d tree, we introduce a distributed KD-Tree (DKD-Tree) suitbable for polygon data, and a two-step query algorithm. The spatial index construction is recursive and iterative, and the query is an in memory process. Both the index and query methods can be processed in parallel, and are implemented based on HDFS, Spark and Redis. Experiments on a large volume of Remote Sensing images metadata have been carried out, and the advantages of our method are investigated by comparing with spatial region queries executed on PostgreSQL and PostGIS. Results show that our approach not only greatly improves the efficiency of spatial region query, but also has good scalability, Moreover, the two-step spatial range query algorithm can also save cluster resources to support a large number of concurrent queries. Therefore, this method is very useful when building large geographic information systems.

Manual for the psychotherapeutic treatment of acute and post-traumatic stress disorders following multiple shocks from implantable cardioverter defibrillator (ICD)

PubMed Central

Jordan, Jochen; Titscher, Georg; Peregrinova, Ludmila; Kirsch, Holger

2013-01-01

Background: In view of the increasing number of implanted cardioverter defibrillators (ICD), the number of people suffering from so-called “multiple ICD shocks” is also increasing. The delivery of more than five shocks (appropriate or inappropriate) in 12 months or three or more shocks (so called multiple shocks) in a short time period (24 hours) leads to an increasing number of patients suffering from severe psychological distress (anxiety disorder, panic disorder, adjustment disorder, post-traumatic stress disorder). Untreated persons show chronic disease processes and a low rate of spontaneous remission and have an increased morbidity and mortality. Few papers have been published concerning the psychotherapeutic treatment for these patients. Objective: The aim of this study is to develop a psychotherapeutic treatment for patients with a post-traumatic stress disorder or adjustment disorder after multiple ICD shocks. Design: Explorative feasibility study: Treatment of 22 patients as a natural design without randomisation and without control group. The period of recruitment was three years, from March 2007 to March 2010. The study consisted of two phases: in the first phase (pilot study) we tested different components and dosages of psychotherapeutic treatments. The final intervention programme is presented in this paper. In the second phase (follow-up study) we assessed the residual post-traumatic stress symptoms in these ICD patients. The time between treatment and follow-up measurement was 12 to 30 months. Population: Thirty-one patients were assigned to the Department of Psychocardiology after multiple shocks. The sample consisted of 22 patients who had a post-traumatic stress disorder or an adjustment disorder and were willing and able to participate. They were invited for psychological treatment. 18 of them could be included into the follow-up study. Methods: After the clinical assessment at the beginning and at the end of the inpatient treatment a post-treatment assessment with questionnaires followed. In this follow-up measurement, minimum 12 months after inpatient treatment, posttraumatic stress was assessed using the “Impact of Event Scale” (IES-R). Setting: Inpatient treatment in a large Heart and Thorax Centre with a Department of Psychocardiology (Kerckhoff Heart Centre). Results: From the 18 patients in the follow-up study no one reported complaints of PTSD. 15 of them reported a high or even a very high decrease of anxiety and avoidance behaviour. Conclusions: The fist step of the treatment development seems to be successful. It shows encouraging results with an acceptable dosage. The second step of our work is in process now: we evaluate the treatment manual within other clinical institutions and a higher number of psychotherapists. This leads in the consequence to a controlled and randomised comparison study. PMID:24403967

Performance Measurement of Location Enabled e-Government Processes: A Use Case on Traffic Safety Monitoring

NASA Astrophysics Data System (ADS)

Vandenbroucke, D.; Vancauwenberghe, G.

2016-12-01

The European Union Location Framework (EULF), as part of the Interoperable Solutions for European Public Administrations (ISA) Programme of the EU (EC DG DIGIT), aims to enhance the interactions between governments, businesses and citizens by embedding location information into e-Government processes. The challenge remains to find scientific sound and at the same time practicable approaches to estimate or measure the impact of location enablement of e-Government processes on the performance of the processes. A method has been defined to estimate process performance in terms of variables describing the efficiency, effectiveness, as well as the quality of the output of the work processes. A series of use cases have been identified, corresponding to existing e-Government work processes in which location information could bring added value. In a first step, the processes are described by means of BPMN (Business Process Model and Notation) to better understand the process steps, the actors involved, the spatial data flows, as well as the required input and the generated output. In a second step the processes are assessed in terms of the (sub-optimal) use of location information and the potential enhancement of the process by better integrating location information and services. The process performance is measured ex ante (before using location enabled e-Government services) and ex-post (after the integration of such services) in order to estimate and measure the impact of location information. The paper describes the method for performance measurement and highlights how the method is applied to one use case, i.e. the process of traffic safety monitoring. The use case is analysed and assessed in terms of location enablement and its potential impact on process performance. The results of applying the methodology on the use case revealed that performance is highly impacted by factors such as the way location information is collected, managed and shared throughout the process, and the degree to which spatial data are harmonized. The work led also to the formulation of some recommendations to enrich the BPMN standard with additional methods for annotating processes, and to the proposal of the development of some tools for automatic process performance. In that context some planned future work is highlighted as well.

76 FR 31645 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... POSTAL REGULATORY COMMISSION [Docket No. A2011-18; Order No. 737] Post Office Closing AGENCY... the closing of the Valley Falls Station has been filed. It identifies preliminary steps and [[Page..., 2011, the Commission received a petition for review of the Postal Service's determination to close the...

76 FR 68232 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... the closing of the Ogden, Arkansas post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Service); November 22, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 72456 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... the closing of the Scottville, Illinois post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service... Postal Service); December 12, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 76447 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... the closing of the Miller, Nebraska post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Service); December 27, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 78953 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-20

... p.m., Eastern Time. See the Procedural Schedule in the SUPPLEMENTARY INFORMATION section for other... the closing of the Mount Union, Iowa post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners...

76 FR 68231 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... the closing of the Ferguson, Iowa post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Service); November 21, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 44053 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

... POSTAL REGULATORY COMMISSION [Docket No. A2011-20; Order No. 760] Post Office Closing AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: This document informs the public that an appeal of the closing of the La Mesa Annex, CA Station has been filed. It identifies preliminary steps and...

In through the out door: a commentary on "personality disorders are the vanguard of the post-DSM-5.0 era".

PubMed

Pincus, Aaron L

2013-10-01

Comments on an article by Krueger (see record 2013-45025-008). Pincus thanks Krueger for sharing his candid, highly informative views on the process and outcome of the DSM-5 (American Psychiatric Association; APA, 2013) Personality Disorder (PD) Work Group. As an "outsider," Pincus identifies with Krueger's descriptions of the scholarly anxiety evoked by following the unfolding process via the dsm5 .org Web site. In the end, however, Pincus thinks Section III is the right place for the proposal. He feels that its developmental process was more ambitious, but also more circuitous, than other revision efforts. Despite the APA's rejection of the proposal for Section II, Pincus agrees with Krueger's vision that continued research on viable aspects of the system represents an important next step in the post-DSM-5.0 era, and the system's inclusion in Section III should provide additional impetus for new research that advances the science of personality pathology. Thus, Pincus takes the optimistic view that innovation in conceptualizing and diagnosing PD has actually made it in through the out door. He notes that how things progress from here is hard to predict. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Treatment stage associated changes in cellular and molecular microbial markers during the production of drinking water at the Vansjø water works.

PubMed

Charnock, Colin; Otterholt, Eli; Nordlie, Anne-Lise

2015-09-15

The production of a drinking water that meets current aesthetic, microbiological and chemical standards, generally requires a combination of mechanical purification and disinfection in a multi-component treatment chain. Treatment choices and optimisation of water processing is best informed by using markers (including microbiological parameters) which indicate how each stage contributes to the production of the potable water. The present study combines culture-based and a number of culture-independent analyses to indicate what is happening at each stage of a state-of-the-art water treatment chain at Vansjø near the city of Moss in Norway. We show that particularly clarification with flotation and post-chlorination have profound and positive effects on water quality with respect to the removal and inactivation of microbes. Post-chlorination achieved better disinfection of the water than UV-treatment and was of paramount importance, as the penultimate step filtration through granular activated shed microbes to the water. Cloning and sequencing showed that some clones present in the raw water were detected at all stages in the treatment process, perhaps providing examples of microbes breaching physically all barriers in the treatment process. Results from the study should be useful in the improvement and maintenance of the treatment process at the Vansjø plant and others. Copyright © 2015 Elsevier Ltd. All rights reserved.

Twelve-Step affiliation and 3-year substance use outcomes among adolescents: social support and religious service attendance as potential mediators.

PubMed

Chi, Felicia W; Kaskutas, Lee A; Sterling, Stacy; Campbell, Cynthia I; Weisner, Constance

2009-06-01

Twelve-Step affiliation among adolescents is little understood. We examined 12-Step affiliation and its association with substance use outcomes 3 years post-treatment intake among adolescents seeking chemical dependency (CD) treatment in a private, managed-care health plan. We also examined the effects of social support and religious service attendance on the relationship. We analyzed data for 357 adolescents, aged 13-18, who entered treatment at four Kaiser Permanente Northern California CD programs between March 2000 and May 2002 and completed both baseline and 3-year follow-up interviews. Measures at follow-up included alcohol and drug use, 12-Step affiliation, social support and frequency of religious service attendance. At 3 years, 68 adolescents (19%) reported attending any 12-Step meetings, and 49 (14%) reported involvement in at least one of seven 12-Step activities, in the previous 6 months. Multivariate logistic regression analyses indicated that after controlling individual and treatment factors, 12-Step attendance at 1 year was marginally significant, while 12-Step attendance at 3 years was associated with both alcohol and drug abstinence at 3 years [odds ratio (OR) 2.58, P < 0.05 and OR 2.53, P < 0.05, respectively]. Similarly, 12-Step activity involvement was associated significantly with 30-day alcohol and drug abstinence. There are possible mediating effects of social support and religious service attendance on the relationship between post-treatment 12-Step affiliation and 3-year outcomes. The findings suggest the importance of 12-Step affiliation in maintaining long-term recovery, and help to understand the mechanism through which it works among adolescents.

Meat science: From proteomics to integrated omics towards system biology.

PubMed

D'Alessandro, Angelo; Zolla, Lello

2013-01-14

Since the main ultimate goal of farm animal raising is the production of proteins for human consumption, research tools to investigate proteins play a major role in farm animal and meat science. Indeed, proteomics has been applied to the field of farm animal science to monitor in vivo performances of livestock animals (growth performances, fertility, milk quality etc.), but also to further our understanding of the molecular processes at the basis of meat quality, which are largely dependent on the post mortem biochemistry of the muscle, often in a species-specific way. Post mortem alterations to the muscle proteome reflect the biological complexity of the process of "muscle to meat conversion," a process that, despite decades of advancements, is all but fully understood. This is mainly due to the enormous amounts of variables affecting meat tenderness per se, including biological factors, such as animal species, breed specific-characteristic, muscle under investigation. However, it is rapidly emerging that the tender meat phenotype is not only tied to genetics (livestock breeding selection), but also to extrinsic factors, such as the rearing environment, feeding conditions, physical activity, administration of hormonal growth promotants, pre-slaughter handling and stress, post mortem handling. From this intricate scenario, biochemical approaches and systems-wide integrated investigations (metabolomics, transcriptomics, interactomics, phosphoproteomics, mathematical modeling), which have emerged as complementary tools to proteomics, have helped establishing a few milestones in our understanding of the events leading from muscle to meat conversion. The growing integration of omics disciplines in the field of systems biology will soon contribute to take further steps forward. Copyright © 2012 Elsevier B.V. All rights reserved.

Simulation of the Press Hardening Process and Prediction of the Final Mechanical Material Properties

NASA Astrophysics Data System (ADS)

Hochholdinger, Bernd; Hora, Pavel; Grass, Hannes; Lipp, Arnulf

2011-08-01

Press hardening is a well-established production process in the automotive industry today. The actual trend of this process technology points towards the manufacturing of parts with tailored properties. Since the knowledge of the mechanical properties of a structural part after forming and quenching is essential for the evaluation of for example the crash performance, an accurate as possible virtual assessment of the production process is more than ever necessary. In order to achieve this, the definition of reliable input parameters and boundary conditions for the thermo-mechanically coupled simulation of the process steps is required. One of the most important input parameters, especially regarding the final properties of the quenched material, is the contact heat transfer coefficient (IHTC). The CHTC depends on the effective pressure or the gap distance between part and tool. The CHTC at different contact pressures and gap distances is determined through inverse parameter identification. Furthermore a simulation strategy for the subsequent steps of the press hardening process as well as adequate modeling approaches for part and tools are discussed. For the prediction of the yield curves of the material after press hardening a phenomenological model is presented. This model requires the knowledge of the microstructure within the part. By post processing the nodal temperature history with a CCT diagram the quantitative distribution of the phase fractions martensite, bainite, ferrite and pearlite after press hardening is determined. The model itself is based on a Hockett-Sherby approach with the Hockett-Sherby parameters being defined in function of the phase fractions and a characteristic cooling rate.

Investigating different filter and rescaling methods on simulated GRACE-like TWS variations for hydrological applications

NASA Astrophysics Data System (ADS)

Zhang, Liangjing; Dobslaw, Henryk; Dahle, Christoph; Thomas, Maik; Neumayer, Karl-Hans; Flechtner, Frank

2017-04-01

By operating for more than one decade now, the GRACE satellite provides valuable information on the total water storage (TWS) for hydrological and hydro-meteorological applications. The increasing interest in use of the GRACE-based TWS requires an in-depth assessment of the reliability of the outputs and also its uncertainties. Through years of development, different post-processing methods have been suggested for TWS estimation. However, since GRACE offers an unique way to provide high spatial and temporal scale TWS, there is no global ground truth data available to fully validate the results. In this contribution, we re-assess a number of commonly used post-processing methods using a simulated GRACE-type gravity field time-series based on realistic orbits and instrument error assumptions as well as background error assumptions out of the updated ESA Earth System Model. Three non-isotropic filter methods from Kusche (2007) and a combined filter from DDK1 and DDK3 based on the ground tracks are tested. Rescaling factors estimated from five different hydrological models and the ensemble median are applied to the post-processed simulated GRACE-type TWS estimates to correct the bias and leakage. Time variant rescaling factors as monthly scaling factors and scaling factors for seasonal and long-term variations separately are investigated as well. Since TWS anomalies out of the post-processed simulation results can be readily compared to the time-variable Earth System Model initially used as "truth" during the forward simulation step, we are able to thoroughly check the plausibility of our error estimation assessment (Zhang et al., 2016) and will subsequently recommend a processing strategy that shall also be applied for planned GRACE and GRACE-FO Level-3 products for terrestrial applications provided by GFZ. Kusche, J., 2007:Approximate decorrelation and non-isotropic smoothing of time-variable GRACE-type gravity field models. J. Geodesy, 81 (11), 733-749, doi:10.1007/s00190-007-0143-3. Zhang L, Dobslaw H, Thomas M (2016) Globally gridded terrestrial water storage variations from GRACE satellite gravimetry for hydrometeorological applications. Geophysical Journal International 206(1):368-378, DOI 10.1093/gji/ggw153.

SU-G-IeP1-01: A Novel MRI Post-Processing Algorithm for Visualization of the Prostate LDR Brachytherapy Seeds and Calcifications Based On B0 Field Inhomogeneity Correction and Hough Transform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nosrati, R; Sunnybrook Health Sciences Centre, Toronto, Ontario; Soliman, A

Purpose: This study aims at developing an MRI-only workflow for post-implant dosimetry of the prostate LDR brachytherapy seeds. The specific goal here is to develop a post-processing algorithm to produce positive contrast for the seeds and prostatic calcifications and differentiate between them on MR images. Methods: An agar-based phantom incorporating four dummy seeds (I-125) and five calcifications of different sizes (from sheep cortical bone) was constructed. Seeds were placed arbitrarily in the coronal plane. The phantom was scanned with 3T Philips Achieva MR scanner using an 8-channel head coil array. Multi-echo turbo spin echo (ME-TSE) and multi-echo gradient recalled echomore » (ME-GRE) sequences were acquired. Due to minimal susceptibility artifacts around seeds, ME-GRE sequence (flip angle=15; TR/TE=20/2.3/2.3; resolution=0.7×0.7×2mm3) was further processed.The induced field inhomogeneity due to the presence of titaniumencapsulated seeds was corrected using a B0 field map. B0 map was calculated using the ME-GRE sequence by calculating the phase difference at two different echo times. Initially, the product of the first echo and B0 map was calculated. The features corresponding to the seeds were then extracted in three steps: 1) the edge pixels were isolated using “Prewitt” operator; 2) the Hough transform was employed to detect ellipses approximately matching the dimensions of the seeds and 3) at the position and orientation of the detected ellipses an ellipse was drawn on the B0-corrected image. Results: The proposed B0-correction process produced positive contrast for the seeds and calcifications. The Hough transform based on Prewitt edge operator successfully identified all the seeds according to their ellipsoidal shape and dimensions in the edge image. Conclusion: The proposed post-processing algorithm successfully visualized the seeds and calcifications with positive contrast and differentiates between them according to their shapes. Further assessments on more realistic phantoms and patient study are required to validate the outcome.« less

The post-transcriptional regulatory system CSR controls the balance of metabolic pools in upper glycolysis of Escherichia coli.

PubMed

Morin, Manon; Ropers, Delphine; Letisse, Fabien; Laguerre, Sandrine; Portais, Jean-Charles; Cocaign-Bousquet, Muriel; Enjalbert, Brice

2016-05-01

Metabolic control in Escherichia coli is a complex process involving multilevel regulatory systems but the involvement of post-transcriptional regulation is uncertain. The post-transcriptional factor CsrA is stated as being the only regulator essential for the use of glycolytic substrates. A dozen enzymes in the central carbon metabolism (CCM) have been reported as potentially controlled by CsrA, but its impact on the CCM functioning has not been demonstrated. Here, a multiscale analysis was performed in a wild-type strain and its isogenic mutant attenuated for CsrA (including growth parameters, gene expression levels, metabolite pools, abundance of enzymes and fluxes). Data integration and regulation analysis showed a coordinated control of the expression of glycolytic enzymes. This also revealed the imbalance of metabolite pools in the csrA mutant upper glycolysis, before the phosphofructokinase PfkA step. This imbalance is associated with a glucose-phosphate stress. Restoring PfkA activity in the csrA mutant strain suppressed this stress and increased the mutant growth rate on glucose. Thus, the carbon storage regulator system is essential for the effective functioning of the upper glycolysis mainly through its control of PfkA. This work demonstrates the pivotal role of post-transcriptional regulation to shape the carbon metabolism. © 2016 John Wiley & Sons Ltd.

Consistent post-reaction vibrational energy redistribution in DSMC simulations using TCE model

NASA Astrophysics Data System (ADS)

Borges Sebastião, Israel; Alexeenko, Alina

2016-10-01

The direct simulation Monte Carlo (DSMC) method has been widely applied to study shockwaves, hypersonic reentry flows, and other nonequilibrium flow phenomena. Although there is currently active research on high-fidelity models based on ab initio data, the total collision energy (TCE) and Larsen-Borgnakke (LB) models remain the most often used chemistry and relaxation models in DSMC simulations, respectively. The conventional implementation of the discrete LB model, however, may not satisfy detailed balance when recombination and exchange reactions play an important role in the flow energy balance. This issue can become even more critical in reacting mixtures involving polyatomic molecules, such as in combustion. In this work, this important shortcoming is addressed and an empirical approach to consistently specify the post-reaction vibrational states close to thermochemical equilibrium conditions is proposed within the TCE framework. Following Bird's quantum-kinetic (QK) methodology for populating post-reaction states, the new TCE-based approach involves two main steps. The state-specific TCE reaction probabilities for a forward reaction are first pre-computed from equilibrium 0-D simulations. These probabilities are then employed to populate the post-reaction vibrational states of the corresponding reverse reaction. The new approach is illustrated by application to exchange and recombination reactions relevant to H2-O2 combustion processes.

Extensive Use of RNA-Binding Proteins in Drosophila Sensory Neuron Dendrite Morphogenesis

PubMed Central

Olesnicky, Eugenia C.; Killian, Darrell J.; Garcia, Evelyn; Morton, Mary C.; Rathjen, Alan R.; Sola, Ismail E.; Gavis, Elizabeth R.

2013-01-01

The large number of RNA-binding proteins and translation factors encoded in the Drosophila and other metazoan genomes predicts widespread use of post-transcriptional regulation in cellular and developmental processes. Previous studies identified roles for several RNA-binding proteins in dendrite branching morphogenesis of Drosophila larval sensory neurons. To determine the larger contribution of post-transcriptional gene regulation to neuronal morphogenesis, we conducted an RNA interference screen to identify additional Drosophila proteins annotated as either RNA-binding proteins or translation factors that function in producing the complex dendritic trees of larval class IV dendritic arborization neurons. We identified 88 genes encoding such proteins whose knockdown resulted in aberrant dendritic morphology, including alterations in dendritic branch number, branch length, field size, and patterning of the dendritic tree. In particular, splicing and translation initiation factors were associated with distinct and characteristic phenotypes, suggesting that different morphogenetic events are best controlled at specific steps in post-transcriptional messenger RNA metabolism. Many of the factors identified in the screen have been implicated in controlling the subcellular distributions and translation of maternal messenger RNAs; thus, common post-transcriptional regulatory strategies may be used in neurogenesis and in the generation of asymmetry in the female germline and embryo. PMID:24347626

Uncovering the Role of RNA-Binding Proteins in Gene Expression in the Immune System

PubMed Central

Díaz-Muñoz, Manuel D.; Turner, Martin

2018-01-01

Fighting external pathogens requires an ever-changing immune system that relies on tight regulation of gene expression. Transcriptional control is the first step to build efficient responses while preventing immunodeficiencies and autoimmunity. Post-transcriptional regulation of RNA editing, location, stability, and translation are the other key steps for final gene expression, and they are all controlled by RNA-binding proteins (RBPs). Nowadays we have a deep understanding of how transcription factors control the immune system but recent evidences suggest that post-transcriptional regulation by RBPs is equally important for both development and activation of immune responses. Here, we review current knowledge about how post-transcriptional control by RBPs shapes our immune system and discuss the perspective of RBPs being the key players of a hidden immune cell epitranscriptome. PMID:29875770

76 FR 63331 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... the closing of the Lakeville, Connecticut post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service...): October 17, 2011; deadline for notices to intervene: October 31, 2011, 4:30 p.m., eastern time. See the...

76 FR 66336 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

... the closing of the Ardenvoir, Washington, post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service...): October 28, 2011; deadline for notices to intervene: November 14, 2011, 4:30 p.m., eastern time. See the...

76 FR 76448 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... the closing of the Viola, Idaho post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Postal Service); December 27, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 72453 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... the closing of the Waverly, Washington post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Postal Service); December 12, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 72458 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... the closing of the Pace, Mississippi post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Postal Service); December 12, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 76451 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... the closing of the Nixon, Nevada post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Postal Service); December 27, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 63332 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... the closing of the Evansdale, Iowa post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... 17, 2011; deadline for notices to intervene: October 31, 2011, 4:30 p.m., eastern time. See the...

76 FR 72454 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... the closing of the Elmo, Missouri post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Postal Service); December 12, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

76 FR 66337 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

... the closing of the Ruth, Mississippi, post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... 28, 2011; deadline for notices to intervene: November 14, 2011, 4:30 p.m., eastern time. See the...

76 FR 76444 - Post Office Closing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... the closing of the Holland, Iowa post office has been filed. It identifies preliminary steps and provides a procedural schedule. Publication of this document will allow the Postal Service, petitioners... Postal Service); December 27, 2011, 4:30 p.m., Eastern Time: Deadline for notices to intervene. See the...

An online community improves adherence in an internet-mediated walking program. Part 1: results of a randomized controlled trial.

PubMed

Richardson, Caroline R; Buis, Lorraine R; Janney, Adrienne W; Goodrich, David E; Sen, Ananda; Hess, Michael L; Mehari, Kathleen S; Fortlage, Laurie A; Resnick, Paul J; Zikmund-Fisher, Brian J; Strecher, Victor J; Piette, John D

2010-12-17

Approximately half of American adults do not meet recommended physical activity guidelines. Face-to-face lifestyle interventions improve health outcomes but are unlikely to yield population-level improvements because they can be difficult to disseminate, expensive to maintain, and inconvenient for the recipient. In contrast, Internet-based behavior change interventions can be disseminated widely at a lower cost. However, the impact of some Internet-mediated programs is limited by high attrition rates. Online communities that allow participants to communicate with each other by posting and reading messages may decrease participant attrition. Our objective was to measure the impact of adding online community features to an Internet-mediated walking program on participant attrition and average daily step counts. This randomized controlled trial included sedentary, ambulatory adults who used email regularly and had at least 1 of the following: overweight (body mass index [BMI] ≥ 25), type 2 diabetes, or coronary artery disease. All participants (n = 324) wore enhanced pedometers throughout the 16-week intervention and uploaded step-count data to the study server. Participants could log in to the study website to view graphs of their walking progress, individually-tailored motivational messages, and weekly calculated goals. Participants were randomized to 1 of 2 versions of a Web-based walking program. Those randomized to the "online community" arm could post and read messages with other participants while those randomized to the "no online community" arm could not read or post messages. The main outcome measures were participant attrition and average daily step counts over 16 weeks. Multiple regression analyses assessed the effect of the online community access controlling for age, sex, disease status, BMI, and baseline step counts. Both arms significantly increased their average daily steps between baseline and the end of the intervention period, but there were no significant differences in increase in step counts between arms using either intention-to-treat or completers analysis. In the intention-to-treat analysis, the average step count increase across both arms was 1888 ± 2400 steps. The percentage of completers was 13% higher in the online community arm than the no online community arm (online community arm, 79%, no online community arm, 66%, P = .02). In addition, online community arm participants remained engaged in the program longer than no online community arm participants (hazard ratio = 0.47, 95% CI = 0.25 - 0.90, P = .02). Participants with lower baseline social support posted more messages to the online community (P < .001) and viewed more posts (P < .001) than participants with higher baseline social support. Adding online community features to an Internet-mediated walking program did not increase average daily step counts but did reduce participant attrition. Participants with low baseline social support used the online community features more than those with high baseline social support. Thus, online communities may be a promising approach to reducing attrition from online health behavior change interventions, particularly in populations with low social support. NCT00729040; http://clinicaltrials.gov/ct2/show/NCT00729040 (Archived by WebCite at http://www.webcitation.org/5v1VH3n0A).

Mirror gait retraining for the treatment of patellofemoral pain in female runners

PubMed Central

Willy, Richard W.; Scholz, John P.; Davis, Irene S.

2012-01-01

Background Abnormal hip mechanics are often implicated in female runners with patellofemoral pain. We sought to evaluate a simple gait retraining technique, using a full-length mirror, in female runners with patellofemoral pain and abnormal hip mechanics. Transfer of the new motor skill to the untrained tasks of single leg squat and step descent was also evaluated. Methods Ten female runners with patellofemoral pain completed 8 sessions of mirror and verbal feedback on their lower extremity alignment during treadmill running. During the last 4 sessions, mirror and verbal feedback were progressively removed. Hip mechanics were assessed during running gait, a single leg squat and a step descent, both pre- and post-retraining. Subjects returned to their normal running routines and analyses were repeated at 1-month and 3-month post-retraining. Data were analyzed via repeated measures analysis of variance. Findings Subjects reduced peaks of hip adduction, contralateral pelvic drop, and hip abduction moment during running (P<0.05, effect size=0.69–2.91). Skill transfer to single leg squatting and step descent was noted (P<0.05, effect size=0.91–1.35). At 1 and 3 months post retraining, most mechanics were maintained in the absence of continued feedback. Subjects reported improvements in pain and function (P<0.05, effect size=3.81–7.61) and maintained through 3 months post retraining. Interpretation Mirror gait retraining was effective in improving mechanics and measures of pain and function. Skill transfer to the untrained tasks of squatting and step descent indicated that a higher level of motor learning had occurred. Extended follow-up is needed to determine the long term efficacy of this treatment. PMID:22917625

Broadband Acoustic Resonance Dissolution Spectroscopy (BARDS): A rapid test for enteric coating thickness and integrity of controlled release pellet formulations.

PubMed

Alfarsi, Anas; Dillon, Amy; McSweeney, Seán; Krüse, Jacob; Griffin, Brendan; Devine, Ken; Sherry, Patricia; Henken, Stephan; Fitzpatrick, Stephen; Fitzpatrick, Dara

2018-06-10

There are no rapid dissolution based tests for determining coating thickness, integrity and drug concentration in controlled release pellets either during production or post-production. The manufacture of pellets requires several coating steps depending on the formulation. The sub-coating and enteric coating steps typically take up to six hours each followed by additional drying steps. Post production regulatory dissolution testing also takes up to six hours to determine if the batch can be released for commercial sale. The thickness of the enteric coating is a key factor that determines the release rate of the drug in the gastro-intestinal tract. Also, the amount of drug per unit mass decreases with increasing thickness of the enteric coating. In this study, the coating process is tracked from start to finish on an hourly basis by taking samples of pellets during production and testing those using BARDS (Broadband Acoustic Resonance Dissolution Spectroscopy). BARDS offers a rapid approach to characterising enteric coatings with measurements based on reproducible changes in the compressibility of a solvent due to the evolution of air during dissolution. This is monitored acoustically via associated changes in the frequency of induced acoustic resonances. A steady state acoustic lag time is associated with the disintegration of the enteric coatings in basic solution. This lag time is pH dependent and is indicative of the rate at which the coating layer dissolves. BARDS represents a possible future surrogate test for conventional USP dissolution testing as its data correlates directly with the thickness of the enteric coating, its integrity and also with the drug loading as validated by HPLC. Copyright © 2018 Elsevier B.V. All rights reserved.