Testing of the SEE and OEE post-hip fracture.

PubMed

Resnick, Barbara; Orwig, Denise; Zimmerman, Sheryl; Hawkes, William; Golden, Justine; Werner-Bronzert, Michelle; Magaziner, Jay

2006-08-01

The purpose of this study was to test the reliability and validity of the Self-Efficacy for Exercise (SEE) and the Outcome Expectations for Exercise (OEE) scales in a sample of 166 older women post-hip fracture. There was some evidence of validity of the SEE and OEE based on confirmatory factor analysis and Rasch model testing, criterion based and convergent validity, and evidence of internal consistency based on alpha coefficients and separation indices and reliability based on R2 estimates. Rasch model testing demonstrated that some items had high variability. Based on these findings suggestions are made for how items could be revised and the scales improved for future use.

Verification of a Constraint Force Equation Methodology for Modeling Multi-Body Stage Separation

NASA Technical Reports Server (NTRS)

Tartabini, Paul V.; Roithmayr, Carlos; Toniolo, Matthew D.; Karlgaard, Christopher; Pamadi, Bandu N.

2008-01-01

This paper discusses the verification of the Constraint Force Equation (CFE) methodology and its implementation in the Program to Optimize Simulated Trajectories II (POST2) for multibody separation problems using three specially designed test cases. The first test case involves two rigid bodies connected by a fixed joint; the second case involves two rigid bodies connected with a universal joint; and the third test case is that of Mach 7 separation of the Hyper-X vehicle. For the first two cases, the POST2/CFE solutions compared well with those obtained using industry standard benchmark codes, namely AUTOLEV and ADAMS. For the Hyper-X case, the POST2/CFE solutions were in reasonable agreement with the flight test data. The CFE implementation in POST2 facilitates the analysis and simulation of stage separation as an integral part of POST2 for seamless end-to-end simulations of launch vehicle trajectories.

Fabrication and verification testing of ETM 30 cm diameter ion thrusters

NASA Technical Reports Server (NTRS)

Collett, C.

1977-01-01

Engineering model designs and acceptance tests are described for the 800 and 900 series 30 cm electron bombardment thrustors. Modifications to the test console for a 1000 hr verification test were made. The 10,000 hr endurance test of the S/N 701 thruster is described, and post test analysis results are included.

Effect of Adding a Regenerator to Kornhauser's MIT "Two-Space" (Gas-Spring+Heat Exchanger) Test Rig

NASA Technical Reports Server (NTRS)

Ebiana, Asuquo B.; Gidugu, Praveen

2008-01-01

This study employed entropy-based second law post-processing analysis to characterize the various thermodynamic losses inside a 3-space solution domain (gas spring+heat exchanger+regenerator) operating under conditions of oscillating pressure and oscillating flow. The 3- space solution domain is adapted from the 2-space solution domain (gas spring+heat exchanger) in Kornhauser's MIT test rig by modifying the heat exchanger space to include a porous regenerator system. A thermal nonequilibrium model which assumes that the regenerator porous matrix and gas average temperatures can differ by several degrees at a given axial location and time during the cycle is employed. An important and primary objective of this study is the development and application of a thermodynamic loss post-processor to characterize the major thermodynamic losses inside the 3-space model. It is anticipated that the experience gained from thermodynamic loss analysis of the simple 3-space model can be extrapolated to more complex systems like the Stirling engine. It is hoped that successful development of loss post-processors will facilitate the improvement of the optimization capability of Stirling engine analysis codes through better understanding of the heat transfer and power losses. It is also anticipated that the incorporation of a successful thermal nonequilibrium model of the regenerator in Stirling engine CFD analysis codes, will improve our ability to accurately model Stirling regenerators relative to current multidimensional thermal-equilibrium porous media models.

Effect of punch and orifice base sizes in different push-out test setups: stress distribution analysis.

PubMed

Zanatta, Rayssa Ferreira; Barreto, Bruno de Castro Ferreira; Xavier, Tathy Aparecida; Versluis, Antheunis; Soares, Carlos José

2015-02-01

This study evaluated the influence of punch and base orifice diameters on push-out test results by means of finite element analysis (FEA). FEA was performed using 3D models of the push-out test with 3 base orifice diameters (2.5, 3.0, and 3.5 mm) and 3 punch diameters (0.5, 1.0, and 1.5 mm) using MARC/MENTAT (MSC.Software). The image of a cervical slice from a root restored with a fiberglass post was used to construct the models. The mechanical properties of dentin, post, and resin cement were obtained from the literature. Bases and punches were constructed as rigid bodies. A 10-N force was applied by the punch in the center of the post in a nonlinear contact analysis. Modified von Mises stress, maximum principal stress, as well as shear and normal stress components were calculated. Both punch and base orifice sizes influenced the stress distribution of the push-out test. Bases with larger diameters and punches with smaller diameters caused higher stress in dentin and at the dentin/cement interface. FEA showed that the diameter of the orifice base had a more significant influence on the stress distribution than did the punch diameter. For this reason, both factors should be taken into account during push-out experimental tests.

Aerospike Engine Post-Test Diagnostic System Delivered to Rocketdyne

NASA Technical Reports Server (NTRS)

Meyer, Claudia M.

2000-01-01

The NASA Glenn Research Center at Lewis Field, in cooperation with Rocketdyne, has designed, developed, and implemented an automated Post-Test Diagnostic System (PTDS) for the X-33 linear aerospike engine. The PTDS was developed to reduce analysis time and to increase the accuracy and repeatability of rocket engine ground test fire and flight data analysis. This diagnostic system provides a fast, consistent, first-pass data analysis, thereby aiding engineers who are responsible for detecting and diagnosing engine anomalies from sensor data. It uses analytical methods modeled after the analysis strategies used by engineers. Glenn delivered the first version of PTDS in September of 1998 to support testing of the engine s power pack assembly. The system was used to analyze all 17 power pack tests and assisted Rocketdyne engineers in troubleshooting both data acquisition and test article anomalies. The engine version of PTDS, which was delivered in June of 1999, will support all single-engine, dual-engine, and flight firings of the aerospike engine.

Utilizing Flight Data to Update Aeroelastic Stability Estimates

NASA Technical Reports Server (NTRS)

Lind, Rick; Brenner, Marty

1997-01-01

Stability analysis of high performance aircraft must account for errors in the system model. A method for computing flutter margins that incorporates flight data has been developed using robust stability theory. This paper considers applying this method to update flutter margins during a post-flight or on-line analysis. Areas of modeling uncertainty that arise when using flight data with this method are investigated. The amount of conservatism in the resulting flutter margins depends on the flight data sets used to update the model. Post-flight updates of flutter margins for an F/A-18 are presented along with a simulation of on-line updates during a flight test.

Post-Test Analysis of 11% Break at PSB-VVER Experimental Facility using Cathare 2 Code

NASA Astrophysics Data System (ADS)

Sabotinov, Luben; Chevrier, Patrick

The best estimate French thermal-hydraulic computer code CATHARE 2 Version 2.5_1 was used for post-test analysis of the experiment “11% upper plenum break”, conducted at the large-scale test facility PSB-VVER in Russia. The PSB rig is 1:300 scaled model of VVER-1000 NPP. A computer model has been developed for CATHARE 2 V2.5_1, taking into account all important components of the PSB facility: reactor model (lower plenum, core, bypass, upper plenum, downcomer), 4 separated loops, pressurizer, horizontal multitube steam generators, break section. The secondary side is represented by recirculation model. A large number of sensitivity calculations has been performed regarding break modeling, reactor pressure vessel modeling, counter current flow modeling, hydraulic losses, heat losses. The comparison between calculated and experimental results shows good prediction of the basic thermal-hydraulic phenomena and parameters such as pressures, temperatures, void fractions, loop seal clearance, etc. The experimental and calculation results are very sensitive regarding the fuel cladding temperature, which show a periodical nature. With the applied CATHARE 1D modeling, the global thermal-hydraulic parameters and the core heat up have been reasonably predicted.

The Motivated Strategies for Learning Questionnaire: score validity among medicine residents.

PubMed

Cook, David A; Thompson, Warren G; Thomas, Kris G

2011-12-01

The Motivated Strategies for Learning Questionnaire (MSLQ) purports to measure motivation using the expectancy-value model. Although it is widely used in other fields, this instrument has received little study in health professions education. The purpose of this study was to evaluate the validity of MSLQ scores. We conducted a validity study evaluating the relationships of MSLQ scores to other variables and their internal structure (reliability and factor analysis). Participants included 210 internal medicine and family medicine residents participating in a web-based course on ambulatory medicine at an academic medical centre. Measurements included pre-course MSLQ scores, pre- and post-module motivation surveys, post-module knowledge test and post-module Instructional Materials Motivation Survey (IMMS) scores. Internal consistency was universally high for all MSLQ items together (Cronbach's α = 0.93) and for each domain (α ≥ 0.67). Total MSLQ scores showed statistically significant positive associations with post-test knowledge scores. For example, a 1-point rise in total MSLQ score was associated with a 4.4% increase in post-test scores (β = 4.4; p < 0.0001). Total MSLQ scores showed moderately strong, statistically significant associations with several other measures of effort, motivation and satisfaction. Scores on MSLQ domains demonstrated associations that generally aligned with our hypotheses. Self-efficacy and control of learning belief scores demonstrated the strongest domain-specific relationships with knowledge scores (β = 2.9 for both). Confirmatory factor analysis showed a borderline model fit. Follow-up exploratory factor analysis revealed the scores of five factors (self-efficacy, intrinsic interest, test anxiety, extrinsic goals, attribution) demonstrated psychometric and predictive properties similar to those of the original scales. Scores on the MSLQ are reliable and predict meaningful outcomes. However, the factor structure suggests a simplified model might better fit the empiric data. Future research might consider how assessing and responding to motivation could enhance learning. © Blackwell Publishing Ltd 2011.

ISPAN (Interactive Stiffened Panel Analysis): A tool for quick concept evaluation and design trade studies

NASA Technical Reports Server (NTRS)

Hairr, John W.; Dorris, William J.; Ingram, J. Edward; Shah, Bharat M.

1993-01-01

Interactive Stiffened Panel Analysis (ISPAN) modules, written in FORTRAN, were developed to provide an easy to use tool for creating finite element models of composite material stiffened panels. The modules allow the user to interactively construct, solve and post-process finite element models of four general types of structural panel configurations using only the panel dimensions and properties as input data. Linear, buckling and post-buckling solution capability is provided. This interactive input allows rapid model generation and solution by non finite element users. The results of a parametric study of a blade stiffened panel are presented to demonstrate the usefulness of the ISPAN modules. Also, a non-linear analysis of a test panel was conducted and the results compared to measured data and previous correlation analysis.

Longitudinal associations between post-traumatic distress and depressive symptoms following a traumatic event: a test of three models.

PubMed

Schindel-Allon, I; Aderka, I M; Shahar, G; Stein, M; Gilboa-Schechtman, E

2010-10-01

Symptoms of post-traumatic stress disorder (PTSD) and depression are highly co-morbid following a traumatic event. Nevertheless, decisive evidence regarding the direction of the relationship between these clinical entities is missing. The aim of the present study was to examine the nature of this relationship by comparing a synchronous change model (PTSD and depression are time synchronous, possibly stemming from a third common factor) with a demoralization model (i.e. PTSD symptoms causing depression) and a depressogenic model (i.e. depressive symptoms causing PTSD symptoms). Israeli adult victims of single-event traumas (n=156) were assessed on measures of PTSD and depression at 2, 4 and 12 weeks post-event. A cross-lagged structural equation modeling (SEM) analysis provided results consistent with the synchronous change model and the depressogenic model. Depressive symptoms may play an important role in the development of post-traumatic symptoms.

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post missed NDAS cycles since 1 Apr 1995 Log of NAM model code changes Log of NAM model test runs Problems and Prediction (NCWCP) 5830 University Research Court College Park, MD 20740 Page Author: EMC Webmaster Page

Middle-School Understanding of the Greenhouse Effect using a NetLogo Computer Model

NASA Astrophysics Data System (ADS)

Schultz, L.; Koons, P. O.; Schauffler, M.

2009-12-01

We investigated the effectiveness of a freely available agent based, modeling program as a learning tool for seventh and eighth grade students to explore the greenhouse effect without added curriculum. The investigation was conducted at two Maine middle-schools with 136 seventh-grade students and 11 eighth-grade students in eight classes. Students were given a pre-test that consisted of a concept map, a free-response question, and multiple-choice questions about how the greenhouse effect influences the Earth's temperature. The computer model simulates the greenhouse effect and allows students to manipulate atmospheric and surface conditions to observe the effects on the Earth’s temperature. Students explored the Greenhouse Effect model for approximately twenty minutes with only two focus questions for guidance. After the exploration period, students were given a post-test that was identical to the pre-test. Parametric post-test analysis of the assessments indicated middle-school students gained in their understanding about how the greenhouse effect influences the Earth's temperature after exploring the computer model for approximately twenty minutes. The magnitude of the changes in pre- and post-test concept map and free-response scores were small (average free-response post-test score of 7.0) compared to an expert's score (48), indicating that students understood only a few of the system relationships. While students gained in their understanding about the greenhouse effect, there was evidence that students held onto their misconceptions that (1) carbon dioxide in the atmosphere deteriorates the ozone layer, (2) the greenhouse effect is a result of humans burning fossil fuels, and (3) infrared and visible light have similar behaviors with greenhouse gases. We recommend using the Greenhouse Effect computer model with guided inquiry to focus students’ investigations on the system relationships in the model.

Stress analysis of different post-luting systems: a three-dimensional finite element analysis.

PubMed

Romeed, S A; Dunne, S M

2013-03-01

The longevity of endodontically treated teeth is usually determined by the adequacy of root canal treatments, coronal seal and favourable stress distribution within the remaining tooth tissues. The aim of this study was to investigate the influence of post material and luting cement on the biomechanics of endodontically treated teeth using three-dimensional finite element analysis (3-D FEA). A 3 mm section of endodontically treated canine tooth was scanned and reconstructed for 3-D modelling and FE analyses. A metal post (MP) and a glass fibre post (GFP) were tested individually with four luting cements [zinc phosphate (ZPH), glass ionomer (GI), resin modified glass ionomer (RMGI) and resin based cements (RC)]. A push-out test was conducted by subjecting all models to 100 N perpendicular loading at the post. The maximum stresses generated along the MP-cement interface were significantly higher than corresponding stresses in the GFP-cement interface regardless of the cement type. GFP generated seven times higher stresses within the root dentine than metal posts when ZPH and GI were used, and three times higher when RMGI and RC were used. The displacement of GFP was double (50 μ) the displacement of MP (20 μ) in all groups. The low elastic modulus of GFP generated lower stresses along its interface and higher stresses within the root dentine, therefore the probability of debonding and root fracture in the GFP group was lower. © 2013 Australian Dental Association.

Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis.

PubMed

Phulpoto, Anwar Hussain; Qazi, Muneer Ahmed; Haq, Ihsan Ul; Phul, Abdul Rahman; Ahmed, Safia; Kanhar, Nisar Ahmed

2018-06-01

The present study validates the oil-based paint bioremediation potential of Bacillus subtilis NAP1 for ecotoxicological assessment using a three-dimensional multi-species bio-testing model. The model included bioassays to determine phytotoxic effect, cytotoxic effect, and antimicrobial effect of oil-based paint. Additionally, the antioxidant activity of pre- and post-bioremediation samples was also detected to confirm its detoxification. Although, the pre-bioremediation samples of oil-based paint displayed significant toxicity against all the life forms. However, post-bioremediation, the cytotoxic effect against Artemia salina revealed substantial detoxification of oil-based paint with LD 50 of 121 μl ml -1 (without glucose) and > 400 μl ml -1 (with glucose). Similarly, the reduction in toxicity against Raphanus raphanistrum seeds germination (%FG = 98 to 100%) was also evident of successful detoxification under experimental conditions. Moreover, the toxicity against test bacterial strains and fungal strains was completely removed after bioremediation. In addition, the post-bioremediation samples showed reduced antioxidant activities (% scavenging = 23.5 ± 0.35 and 28.9 ± 2.7) without and with glucose, respectively. Convincingly, the present multi-species bio-testing model in addition to antioxidant studies could be suggested as a validation tool for bioremediation experiments, especially for middle and low-income countries. Graphical abstract ᅟ.

The Effects of Training on Knowledge and Beliefs About Breast Cancer and Early Diagnosis Methods Among Women.

PubMed

Yılmaz, Meryem; Sayın, Yazile; Cengiz, Hatice Öner

2017-10-01

Breast cancer (BC) is the most common female malignancy in the world and Turkey. Its prevalence and mortality are surprisingly increasing at a rapid rate. The objective of this study was to determine the effectiveness of training sessions on women's knowledge of relevant risk factors of BC and screening methods, screening behaviors and health beliefs among of healthy women in Turkey. In this study, in order to establish the efficiency of BC training, a semi-empirical single group pre-test & post-test research model was used. The data were collected by using a self-administered questionnaire and by using the Turkish version of Champion's health belief model scale (CHBMS). The pre-test was performed before the training and after one week of the training, post-test was performed with a questionnaire having the same content. In total, 244 women participated in the study. The average age of the women was 39.44 (SD=1.06) years. The mean total knowledge score increased significantly (p<.001) from 9.05 in the pre-test to 16.53 in the post-test. The results showed that both mean knowledge scores and CHBMS subscales scores of the women were increased significantly (p<.001) from the pre-test to the post-test. In multiple linear regression analysis, BC screening knowledge of women with susceptibility, benefit, self-efficacy and health motivation subscales of CHBMS, breast self-examination (BSE) practice and self-efficacy were also significant in the post-test; in the pre- and post-tests, a significant relationship among the level of education of women, susceptibility and seriousness was found (p<.001). The study showed that the training program had profound effects on BC knowledge, screening behaviors and health beliefs of women.

Development, Analysis and Testing of the High Speed Research Flexible Semispan Model

NASA Technical Reports Server (NTRS)

Schuster, David M.; Spain, Charles V.; Turnock, David L.; Rausch, Russ D.; Hamouda, M-Nabil; Vogler, William A.; Stockwell, Alan E.

1999-01-01

This report presents the work performed by Lockheed Martin Engineering and Sciences (LMES) in support of the High Speed Research (HSR) Flexible Semispan Model (FSM) wind-tunnel test. The test was conducted in order to assess the aerodynamic and aeroelastic character of a flexible high speed civil transport wing. Data was acquired for the purpose of code validation and trend evaluation for this type of wing. The report describes a number of activities in preparing for and conducting the wind-tunnel test. These included coordination of the design and fabrication, development of analytical models, analysis/hardware correlation, performance of laboratory tests, monitoring of model safety issues, and wind-tunnel data acquisition and reduction. Descriptions and relevant evaluations associated with the pretest data are given in sections 1 through 6, followed by pre- and post-test flutter analysis in section 7, and the results of the aerodynamics/loads test in section 8. Finally, section 9 provides some recommendations based on lessons learned throughout the FSM program.

Ares I-X Flight Test Validation of Control Design Tools in the Frequency-Domain

NASA Technical Reports Server (NTRS)

Johnson, Matthew; Hannan, Mike; Brandon, Jay; Derry, Stephen

2011-01-01

A major motivation of the Ares I-X flight test program was to Design for Data, in order to maximize the usefulness of the data recorded in support of Ares I modeling and validation of design and analysis tools. The Design for Data effort was intended to enable good post-flight characterizations of the flight control system, the vehicle structural dynamics, and also the aerodynamic characteristics of the vehicle. To extract the necessary data from the system during flight, a set of small predetermined Programmed Test Inputs (PTIs) was injected directly into the TVC signal. These PTIs were designed to excite the necessary vehicle dynamics while exhibiting a minimal impact on loads. The method is similar to common approaches in aircraft flight test programs, but with unique launch vehicle challenges due to rapidly changing states, short duration of flight, a tight flight envelope, and an inability to repeat any test. This paper documents the validation effort of the stability analysis tools to the flight data which was performed by comparing the post-flight calculated frequency response of the vehicle to the frequency response calculated by the stability analysis tools used to design and analyze the preflight models during the control design effort. The comparison between flight day frequency response and stability tool analysis for flight of the simulated vehicle shows good agreement and provides a high level of confidence in the stability analysis tools for use in any future program. This is true for both a nominal model as well as for dispersed analysis, which shows that the flight day frequency response is enveloped by the vehicle s preflight uncertainty models.

Structural dynamic analysis of the Space Shuttle Main Engine

NASA Technical Reports Server (NTRS)

Scott, L. P.; Jamison, G. T.; Mccutcheon, W. A.; Price, J. M.

1981-01-01

This structural dynamic analysis supports development of the SSME by evaluating components subjected to critical dynamic loads, identifying significant parameters, and evaluating solution methods. Engine operating parameters at both rated and full power levels are considered. Detailed structural dynamic analyses of operationally critical and life limited components support the assessment of engine design modifications and environmental changes. Engine system test results are utilized to verify analytic model simulations. The SSME main chamber injector assembly is an assembly of 600 injector elements which are called LOX posts. The overall LOX post analysis procedure is shown.

Anatomical knowledge gain through a clay-modeling exercise compared to live and video observations.

PubMed

Kooloos, Jan G M; Schepens-Franke, Annelieke N; Bergman, Esther M; Donders, Rogier A R T; Vorstenbosch, Marc A T M

2014-01-01

Clay modeling is increasingly used as a teaching method other than dissection. The haptic experience during clay modeling is supposed to correspond to the learning effect of manipulations during exercises in the dissection room involving tissues and organs. We questioned this assumption in two pretest-post-test experiments. In these experiments, the learning effects of clay modeling were compared to either live observations (Experiment I) or video observations (Experiment II) of the clay-modeling exercise. The effects of learning were measured with multiple choice questions, extended matching questions, and recognition of structures on illustrations of cross-sections. Analysis of covariance with pretest scores as the covariate was used to elaborate the results. Experiment I showed a significantly higher post-test score for the observers, whereas Experiment II showed a significantly higher post-test score for the clay modelers. This study shows that (1) students who perform clay-modeling exercises show less gain in anatomical knowledge than students who attentively observe the same exercise being carried out and (2) performing a clay-modeling exercise is better in anatomical knowledge gain compared to the study of a video of the recorded exercise. The most important learning effect seems to be the engagement in the exercise, focusing attention and stimulating time on task. © 2014 American Association of Anatomists.

Supersonic Flight Dynamics Test 1 - Post-Flight Assessment of Simulation Performance

NASA Technical Reports Server (NTRS)

Dutta, Soumyo; Bowes, Angela L.; Striepe, Scott A.; Davis, Jody L.; Queen, Eric M.; Blood, Eric M.; Ivanov, Mark C.

2015-01-01

NASA's Low Density Supersonic Decelerator (LDSD) project conducted its first Supersonic Flight Dynamics Test (SFDT-1) on June 28, 2014. Program to Optimize Simulated Trajectories II (POST2) was one of the flight dynamics codes used to simulate and predict the flight performance and Monte Carlo analysis was used to characterize the potential flight conditions experienced by the test vehicle. This paper compares the simulation predictions with the reconstructed trajectory of SFDT-1. Additionally, off-nominal conditions seen during flight are modeled in post-flight simulations to find the primary contributors that reconcile the simulation with flight data. The results of these analyses are beneficial for the pre-flight simulation and targeting of the follow-on SFDT flights currently scheduled for summer 2015.

Interactive Schematic Integration Within the Propellant System Modeling Environment

NASA Technical Reports Server (NTRS)

Coote, David; Ryan, Harry; Burton, Kenneth; McKinney, Lee; Woodman, Don

2012-01-01

Task requirements for rocket propulsion test preparations of the test stand facilities drive the need to model the test facility propellant systems prior to constructing physical modifications. The Propellant System Modeling Environment (PSME) is an initiative designed to enable increased efficiency and expanded capabilities to a broader base of NASA engineers in the use of modeling and simulation (M&S) technologies for rocket propulsion test and launch mission requirements. PSME will enable a wider scope of users to utilize M&S of propulsion test and launch facilities for predictive and post-analysis functionality by offering a clean, easy-to-use, high-performance application environment.

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post do data transfer from Gaea to Vapor; DTN (Nwave) has set up for all users but wants one user to test numerous cpu intensive scripts? Click here to view more information Open Effects of the problem: NCEP pre

General Model Study of Scour at Proposed Pier Extensions - Santa Ana River at BNSF Bridge, Corona, California

DTIC Science & Technology

2017-11-01

model of the bridge piers, other related structures, and the adjacent channel. Data from the model provided a qualitative and quantitative evaluation of...minus post-test lidar survey . ......................... 42 Figure 38. Test 1 (30,000 cfs existing conditions) pre- minus post-test lidar survey ...43 Figure 39. Test 7 (15,000 cfs original proposed conditions) pre- minus post-test lidar survey

The Advantages of Using Planned Comparisons over Post Hoc Tests.

ERIC Educational Resources Information Center

Kuehne, Carolyn C.

There are advantages to using a priori or planned comparisons rather than omnibus multivariate analysis of variance (MANOVA) tests followed by post hoc or a posteriori testing. A small heuristic data set is used to illustrate these advantages. An omnibus MANOVA test was performed on the data followed by a post hoc test (discriminant analysis). A…

Experimental validation of finite element model analysis of a steel frame in simulated post-earthquake fire environments

NASA Astrophysics Data System (ADS)

Huang, Ying; Bevans, W. J.; Xiao, Hai; Zhou, Zhi; Chen, Genda

2012-04-01

During or after an earthquake event, building system often experiences large strains due to shaking effects as observed during recent earthquakes, causing permanent inelastic deformation. In addition to the inelastic deformation induced by the earthquake effect, the post-earthquake fires associated with short fuse of electrical systems and leakage of gas devices can further strain the already damaged structures during the earthquakes, potentially leading to a progressive collapse of buildings. Under these harsh environments, measurements on the involved building by various sensors could only provide limited structural health information. Finite element model analysis, on the other hand, if validated by predesigned experiments, can provide detail structural behavior information of the entire structures. In this paper, a temperature dependent nonlinear 3-D finite element model (FEM) of a one-story steel frame is set up by ABAQUS based on the cited material property of steel from EN 1993-1.2 and AISC manuals. The FEM is validated by testing the modeled steel frame in simulated post-earthquake environments. Comparisons between the FEM analysis and the experimental results show that the FEM predicts the structural behavior of the steel frame in post-earthquake fire conditions reasonably. With experimental validations, the FEM analysis of critical structures could be continuously predicted for structures in these harsh environments for a better assistant to fire fighters in their rescue efforts and save fire victims.

TSP Symposium 2013 Proceedings

DTIC Science & Technology

2014-01-01

test and Post - test Results of the Experimental Group Our results show that the experimental group improved on the post - test compared...4.3.4 Design of the Learning Strategy 27 4.4 Results 28 4.4.1 Post - test 28 4.4.2 Analysis of the Results 28 4.4.3 Analysis of the Results from the...Estimation Accuracy) 17 Figure 5: Methodology for the Research 24 Figure 6: Question 1, Time Control for Post - test 28 Figure 7:

Comparative performance assessment of commercially available automatic external defibrillators: A simulation and real-life measurement study of hands-off time.

PubMed

Savastano, Simone; Vanni, Vincenzo; Burkart, Roman; Raimondi, Maurizio; Canevari, Fabrizio; Molinari, Simone; Baldi, Enrico; Danza, Aurora I; Caputo, Maria Luce; Mauri, Romano; Regoli, Francois; Conte, Giulio; Benvenuti, Claudio; Auricchio, Angelo

2017-01-01

Early and good quality cardiopulmonary resuscitation (CPR) and the use of automated external defibrillators (AEDs) improve cardiac arrest patients' survival. However, AED peri- and post-shock/analysis pauses may reduce CPR effectiveness. The time performance of 12 different commercially available AEDs was tested in a manikin based scenario; then the AEDs recordings from the same tested models following the clinical use both in Pavia and Ticino were analyzed to evaluate the post-shock and post-analysis time. None of the AEDs was able to complete the analysis and to charge the capacitors in less than 10s and the mean post-shock pause was 6.7±2.4s. For non-shockable rhythms, the mean analysis time was 10.3±2s and the mean post-analysis time was 6.2±2.2s. We analyzed 154 AED records [104 by Emergency Medical Service (EMS) rescuers; 50 by lay rescuers]. EMS rescuers were faster in resuming CPR than lay rescuers [5.3s (95%CI 5-5.7) vs 8.6s (95%CI 7.3-10). AEDs showed different performances that may reduce CPR quality mostly for those rescuers following AED instructions. Both technological improvements and better lay rescuers training might be needed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Accelerated aging of adhesive-mediated fiber post-resin composite bonds: A modeling approach.

PubMed

Radovic, Ivana; Monticelli, Francesca; Papacchini, Federica; Magni, Elisa; Cury, Alvaro Hafiz; Vulicevic, Zoran R; Ferrari, Marco

2007-08-01

Although fiber posts luted in root canals are not directly exposed to oral fluids, water storage is considered as in vitro accelerated aging test for bonded interfaces. The aim of the study was to evaluate the influence of accelerated water aging on fiber post-resin composite adhesion. Forty fiber posts (DT Light Post, RTD) were randomly divided into two main groups, according to the surface treatment performed. Group I: XPBond adhesive (Dentsply Caulk); Group II: sandblasting (Rocatec-Pre, 3M ESPE) and XPBond. Dual-cured resin cement (Calibra, Dentsply Caulk) and flowable composite (X-Flow, Dentsply Caulk) were applied on the posts to produce cylindrical specimens. The bond strength at the interface between post and cement/composite was measured with the microtensile test according to the non-trimming technique. Half of the sticks were tested immediately for bond strength, while in the other half testing was performed after 1 month of water storage at 37 degrees C. Post-cement/composite interfaces were evaluated under SEM prior and after water aging. Statistical analysis was performed using the Kruskal-Wallis ANOVA followed by Dunn's multiple range test (p<0.05). Immediate bond strength was higher on sandblasted posts. After water aging the two post surface treatments resulted comparable in bond strength. Resin cement achieved higher bond strength to fiber posts than flowable composite. Water aging significantly reduced bond strength. Sandblasting followed by adhesive coating may improve immediate post-resin bond strength in comparison to adhesive alone. However, fiber post-resin bond strength mediated by hydrophilic adhesive tends to decrease after water aging.

[The Influence of Subjective Health Status, Post-Traumatic Growth, and Social Support on Successful Aging in Middle-Aged Women].

PubMed

Lee, Seung Hee; Jang, Hyung Suk; Yang, Young Hee

2016-10-01

This study was done to investigate factors influencing successful aging in middle-aged women. A convenience sample of 103 middle-aged women was selected from the community. Data were collected using a structured questionnaire and analyzed using descriptive statistics, two-sample t-test, one-way ANOVA, Kruskal Wallis test, Pearson correlations, Spearman correlations and multiple regression analysis with the SPSS/WIN 22.0 program. Results of regression analysis showed that significant factors influencing successful aging were post-traumatic growth and social support. This regression model explained 48% of the variance in successful aging. Findings show that the concept 'post-traumatic growth' is an important factor influencing successful aging in middle-aged women. In addition, social support from friends/co-workers had greater influence on successful aging than social support from family. Thus, we need to consider the positive impact of post-traumatic growth and increase the chances of social participation in a successful aging program for middle-aged women.

The Effect of Stress Management Model in Quality of Life in Breast Cancer Women.

PubMed

Khodabakhshi Koolaee, Anahita; Falsafinejad, Mohammad Reza; Akbari, Mohammd Esmaeil

2015-08-01

Breast cancer associates with severs severe distress and stress. Since Because of that, the stress management program can train necessary skills to cope with stress; therefore, the current study investigates the effectiveness of stress management on enhancement of quality of life. The aim of the current study is to examine the effectiveness of stress management model in quality of life for breast cancer patients. This research is a quasi-experimental study with pre and post-tests. The 21 subjects were selected from cancer institute of Imam Khomeini in Tehran in 2014. The participants were allocated to two matched groups based on their pre-test scores. They were assigned randomly to the control and experimental groups. Stress management was conducted with the experimental group during 10 sessions. Then the questionnaire was administered at post-test. Statistical analysis was conducted by using the independent t-test and analysis of variance. The research instrument was the core quality of life questionnaire QLQ-C30. The results of the independent t-test showed that there is a significant difference between the pretest and post-test scores in the experimental group (P < 0.05). Also, there is no significant difference between means of quality of life subscales and socio demographic of the patients such as; age, education and disease stage (P < 0.05). The results indicate that stress management can change the irrational and distortion thoughts. So, it enhances the quality of life in breast cancer patients.

Photoelastic stress analysis of different prefabricated post-and-core materials.

PubMed

Asvanund, Pattapon; Morgano, Steven M

2011-01-01

The purpose of this study was to investigate stress developed by a combination of a stainless steel post or a fiber-reinforced resin post with a silver amalgam core or a composite resin core. Two-dimensional photoelastic models were used to simulate root dentin. Posts (ParaPost XT and ParaPost-FiberWhite) were cemented with a luting agent (RelyX Unicem). Silver amalgam cores and composite resin cores were fabricated on the posts. Complete crowns were fabricated and cemented on the cores. Each model was analyzed with 2 force magnitudes and in 2 directions. Fringe orders were recorded and compared using ANOVA (p=0.05) and the Scheffe's test. With vertical force, no stress differences occurred among the 4 groups (p=0.159). With a 30-degree force, there was stress differences among the 4 groups (p<0.001). The combination of a fiber-reinforced post and composite resin core could potentially reduce stresses within the radicular dentin when angled loads are applied.

Long-term costs of introducing HPV-DNA post-treatment surveillance to national cervical cancer screening in Ireland.

PubMed

Agapova, Maria; Duignan, Andrea; Smith, Alan; O'Neill, Ciaran; Basu, Anirban

2015-01-01

Co-testing (cytology plus human papillomavirus DNA testing) as part of cervical cancer surveillance in Ireland increases one-time testing costs. Of interest to policy makers was the long-term impact of these costs accompanied by decreases in intensity of recalls for women with no detected abnormalities. A cost analysis of cytology-only and co-testing strategy was implemented using decision analytic modeling, aggregating testing utilization and costs for each of the two strategies over 12 years. Aggregated incremental costs of the co-testing strategy were positive for the first 3 years but became negative thereafter, generating a cost savings of roughly €20 million in favor of the cytology-only strategy over a 12-year period. Results were robust over a range of sensitivity analyses with respect to discount and attrition rates. This analysis provided valuable information to policy makers contributing to the introduction of co-testing for post-treatment surveillance (PTS) in Ireland.

Long-term costs of introducing HPV-DNA post-treatment surveillance to national cervical cancer screening in Ireland

PubMed Central

Agapova, Maria; Duignan, Andrea; Smith, Alan; O'Neill, Ciaran; Basu, Anirban

2018-01-01

Introduction Co-testing (cytology plus human papillomavirus DNA testing) as part of cervical cancer surveillance in Ireland increases one-time testing costs. Of interest to policy makers was the long-term impact of these costs accompanied by decreases in intensity of recalls for women with no detected abnormalities. Methods A cost-analysis of cytology-only and co-testing was implemented using decision analytic modeling, aggregating testing utilization and costs for each of the two strategies over 12 years. Results Aggregated incremental costs of the co-testing strategy were positive for the first 3 years but became negative thereafter, generating a cost savings of roughly €20 million in favor of the cytology-only strategy over a 12-year period. Results were robust over a range of sensitivity analyses with respect to discount and attrition rates. Discussion This analysis provided valuable information to policy makers contributing to the introduction of co-testing for post-treatment surveillance in Ireland. PMID:26377838

Patient self-report section of the ASES questionnaire: a Spanish validation study using classical test theory and the Rasch model.

PubMed

Vrotsou, Kalliopi; Cuéllar, Ricardo; Silió, Félix; Rodriguez, Miguel Ángel; Garay, Daniel; Busto, Gorka; Trancho, Ziortza; Escobar, Antonio

2016-10-18

The aim of the current study was to validate the self-report section of the American Shoulder and Elbow Surgeons questionnaire (ASES-p) into Spanish. Shoulder pathology patients were recruited and followed up to 6 months post treatment. The ASES-p, Constant, SF-36 and Barthel scales were filled-in pre and post treatment. Reliability was tested with Cronbach's alpha, convergent validity with Spearman's correlations coefficients. Confirmatory factor analysis (CFA) and the Rasch model were implemented for assessing structural validity and unidimensionality of the scale. Models with and without the pain item were considered. Responsiveness to change was explored via standardised effect sizes. Results were acceptable for both tested models. Cronbach's alpha was 0.91, total scale correlations with Constant and physical SF-36 dimensions were >0.50. Factor loadings for CFA were >0.40. The Rasch model confirmed unidimensionality of the scale, even though item 10 "do usual sport" was suggested as non-informative. Finally, patients with improved post treatment shoulder function and those receiving surgery had higher standardised effect sizes. The adapted Spanish ASES-p version is a valid and reliable tool for shoulder evaluation and its unidimensionality is supported by the data.

Detecting Intervention Effects in a Cluster-Randomized Design Using Multilevel Structural Equation Modeling for Binary Responses

ERIC Educational Resources Information Center

Cho, Sun-Joo; Preacher, Kristopher J.; Bottge, Brian A.

2015-01-01

Multilevel modeling (MLM) is frequently used to detect group differences, such as an intervention effect in a pre-test--post-test cluster-randomized design. Group differences on the post-test scores are detected by controlling for pre-test scores as a proxy variable for unobserved factors that predict future attributes. The pre-test and post-test…

Flow induced vibrations in the SSME injector heads

NASA Technical Reports Server (NTRS)

Lepore, Frank A.

1991-01-01

A description is given of the flowfield in the Space Shuttle Main Engine (SSME) powerhead, the mechanisms which control flow-induced vibrations, and previous experimental work. An in-depth description is given of the development phase of the program , which includes the analysis, design, and fabrication of liquid oxygen (LOX) posts models used in the experimental phase, as well as test facilities, equipment, and procedures used. Also covered is the experimental data analysis, which includes overall steady state powerhead flowfield as well as the high frequency response of the LOX posts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luk, V.K.; Hessheimer, M.F.; Matsumoto, T.

A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11--12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented.

"When information is not enough": A model for understanding BRCA-positive previvors' information needs regarding hereditary breast and ovarian cancer risk.

PubMed

Dean, Marleah; Scherr, Courtney L; Clements, Meredith; Koruo, Rachel; Martinez, Jennifer; Ross, Amy

2017-09-01

To investigate BRCA-positive, unaffected patients' - referred to as previvors - information needs after testing positive for a deleterious BRCA genetic mutation. 25 qualitative interviews were conducted with previvors. Data were analyzed using the constant comparison method of grounded theory. Analysis revealed a theoretical model of previvors' information needs related to the stage of their health journey. Specifically, a four-stage model was developed based on the data: (1) pre-testing information needs, (2) post-testing information needs, (3) pre-management information needs, and (4) post-management information needs. Two recurring dimensions of desired knowledge also emerged within the stages-personal/social knowledge and medical knowledge. While previvors may be genetically predisposed to develop cancer, they have not been diagnosed with cancer, and therefore have different information needs than cancer patients and cancer survivors. This model can serve as a framework for assisting healthcare providers in meeting the specific information needs of cancer previvors. Copyright © 2017 Elsevier B.V. All rights reserved.

Inhibition of Orthopaedic Implant Infections by Immunomodulatory Effects of Host Defense Peptides

DTIC Science & Technology

2014-12-01

significance was determined by t- tests or by one-way analysis of variance (ANOVA) followed by Bonferroni post hoc tests in experiments with multiple...groups. Non- parametric Mann-Whitney tests , Kruskal-Wallis ANOVA followed by Newman-Kuels post hoc tests , or van Elteren’s two-way tests were applied to...in D, and black symbols in A), statistical analysis was by one-way ANOVA followed by Bonferroni versus control, post hoc tests . Otherwise, statistical

Thermal and Fluid Modeling of the CRYogenic Orbital TEstbed (CRYOTE) Ground Test Article (GTA)

NASA Technical Reports Server (NTRS)

Piryk, David; Schallhorn, Paul; Walls, Laurie; Stopnitzky, Benny; Rhys, Noah; Wollen, Mark

2012-01-01

The purpose of this study was to anchor thermal and fluid system models to data acquired from a ground test article (GTA) for the CRYogenic Orbital TEstbed - CRYOTE. To accomplish this analysis, it was broken into four primary tasks. These included model development, pre-test predictions, testing support at Marshall Space Flight Center (MSFC} and post-test correlations. Information from MSFC facilitated the task of refining and correlating the initial models. The primary goal of the modeling/testing/correlating efforts was to characterize heat loads throughout the ground test article. Significant factors impacting the heat loads included radiative environments, multi-layer insulation (MLI) performance, tank fill levels, tank pressures, and even contact conductance coefficients. This paper demonstrates how analytical thermal/fluid networks were established, and it includes supporting rationale for specific thermal responses seen during testing.

Mixed Effects Modeling of Morris Water Maze Data: Advantages and Cautionary Notes

ERIC Educational Resources Information Center

Young, Michael E.; Clark, M. H.; Goffus, Andrea; Hoane, Michael R.

2009-01-01

Morris water maze data are most commonly analyzed using repeated measures analysis of variance in which daily test sessions are analyzed as an unordered categorical variable. This approach, however, may lack power, relies heavily on post hoc tests of daily performance that can complicate interpretation, and does not target the nonlinear trends…

Multidimensional fatigue inventory and post-polio syndrome - a Rasch analysis.

PubMed

Dencker, Anna; Sunnerhagen, Katharina S; Taft, Charles; Lundgren-Nilsson, Åsa

2015-02-12

Fatigue is a common symptom in post-polio syndrome (PPS) and can have a substantial impact on patients. There is a need for validated questionnaires to assess fatigue in PPS for use in clinical practice and research. The aim with this study was to assess the validity and reliability of the Swedish version of Multidimensional Fatigue Inventory (MFI-20) in patients with PPS using the Rasch model. A total of 231 patients diagnosed with PPS completed the Swedish MFI-20 questionnaire at post-polio out-patient clinics in Sweden. The mean age of participants was 62 years and 61% were females. Data were tested against assumptions of the Rasch measurement model (i.e. unidimensionality of the scale, good item fit, independency of items and absence of differential item functioning). Reliability was tested with the person separation index (PSI). A transformation of the ordinal total scale scores into an interval scale for use in parametric analysis was performed. Dummy cases with minimum and maximum scoring were used for the transformation table to achieve interval scores between 20 and 100, which are comprehensive limits for the MFI-20 scale. An initial Rasch analysis of the full scale with 20 items showed misfit to the Rasch model (p < 0.001). Seven items showed slightly disordered thresholds and person estimates were not significantly improved by rescoring items. Analysis of MFI-20 scale with the 5 MFI-20 subscales as testlets showed good fit with a non-significant x (2) value (p = 0.089). PSI for the testlet solution was 0.86. Local dependency was present in all subscales and fit to the Rasch model was solved with testlets within each subscale. PSI ranged from 0.52 to 0.82 in the subscales. This study shows that the Swedish MFI-20 total scale and subscale scores yield valid and reliable measures of fatigue in persons with post-polio syndrome. The Rasch transformed total scores can be used for parametric statistical analyses in future clinical studies.

Models of service delivery for cancer genetic risk assessment and counseling.

PubMed

Trepanier, Angela M; Allain, Dawn C

2014-04-01

Increasing awareness of and the potentially concomitant increasing demand for cancer genetic services is driving the need to explore more efficient models of service delivery. The aims of this study were to determine which service delivery models are most commonly used by genetic counselors, assess how often they are used, compare the efficiency of each model as well as impact on access to services, and investigate the perceived benefits and barriers of each. Full members of the NSGC Familial Cancer Special Interest Group who subscribe to its listserv were invited to participate in a web-based survey. Eligible respondents were asked which of ten defined service delivery models they use and specific questions related to aspects of model use. One-hundred ninety-two of the approximately 450 members of the listserv responded (42.7%); 177 (92.2%) had provided clinical service in the last year and were eligible to complete all sections of the survey. The four direct care models most commonly used were the (traditional) face-to-face pre- and post-test model (92.2%), the face-to-face pretest without face-to-face post-test model (86.5%), the post-test counseling only for complex results model (36.2%), and the post test counseling for all results model (18.3%). Those using the face-to-face pretest only, post-test all, and post-test complex models reported seeing more new patients than when they used the traditional model and these differences were statistically significantly. There were no significant differences in appointment wait times or distances traveled by patients when comparing use of the traditional model to the other three models. Respondents recognize that a benefit of using alternative service delivery models is increased access to services; however, some are concerned that this may affect quality of care.

AMP!: A Cross-site Analysis of the Effects of a Theater-based Intervention on Adolescent Awareness, Attitudes, and Knowledge about HIV.

PubMed

Taggart, Tamara; Taboada, Arianna; Stein, Judith A; Milburn, Norweeta G; Gere, David; Lightfoot, Alexandra F

2016-07-01

AMP! (Arts-based, Multiple component, Peer-education) is an HIV intervention developed for high school adolescents. AMP! uses interactive theater-based scenarios developed by trained college undergraduates to deliver messages addressing HIV/STI prevention strategies, healthy relationships, and stigma reduction towards people living with HIV/AIDS. We used a pre-test/post-test, control group study design to simultaneously assess intervention effect on ninth grade students in an urban county in California (N = 159) and a suburban county in North Carolina (N = 317). In each location, the control group received standard health education curricula delivered by teachers; the intervention group received AMP! in addition to standard health education curricula. Structural equation modeling was used to determine intervention effects. The post-test sample was 46 % male, 90 % self-identified as heterosexual, 32 % reported receiving free or reduced lunch, and 49 % White. Structural models indicated that participation in AMP! predicted higher scores on HIV knowledge (p = 0.05), HIV awareness (p = 0.01), and HIV attitudes (p = 0.05) at the post-test. Latent means comparison analyses revealed post-test scores were significantly higher than pre-test scores on HIV knowledge (p = 0.001), HIV awareness (p = 0.001), and HIV attitudes (p = 0.001). Further analyses indicated that scores rose for both groups, but the post-test scores of intervention participants were significantly higher than controls (HIV knowledge (p = 0.01), HIV awareness (p = 0.01), and HIV attitudes (p = 0.05)). Thus, AMP!'s theater-based approach shows promise for addressing multiple adolescent risk factors and attitudes concerning HIV in school settings.

Post-test analysis of dryout test 7B' of the W-1 Sodium Loop Safety Facility Experiment with the SABRE-2P code. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, S.D.; Dearing, J.F.

An understanding of conditions that may cause sodium boiling and boiling propagation that may lead to dryout and fuel failure is crucial in liquid-metal fast-breeder reactor safety. In this study, the SABRE-2P subchannel analysis code has been used to analyze the ultimate transient of the in-core W-1 Sodium Loop Safety Facility experiment. This code has a 3-D simple nondynamic boiling model which is able to predict the flow instability which caused dryout. In other analyses dryout has been predicted for out-of-core test bundles and so this study provides additional confirmation of the model.

Longitudinal modelling of theory-based depressive vulnerabilities, depression trajectories and poor outcomes post-ACS.

PubMed

Keegan, Conor; Conroy, Ronán; Doyle, Frank

2016-02-01

Depression is associated with increased mortality in patients with acute coronary syndrome (ACS). However, little is known about the theoretical causes of depression trajectories post-ACS, and whether these trajectories predict subsequent morbidity/mortality. We tested a longitudinal model of depressive vulnerabilities, trajectories and mortality. A prospective observational study of 374 ACS patients was conducted. Participants completed questionnaires on theoretical vulnerabilities (interpersonal life events, reinforcing events, cognitive distortions, and Type D personality) during hospitalisation and depression at baseline and 3, 6 and 12 months post-hospitalisation. Latent class analysis determined trajectories of depression. Path analysis was used to test relationships among vulnerabilities, depression trajectories and outcomes (combination of 1-year morbidity and 7-year mortality). Vulnerabilities independently predicted persistent and subthreshold depression trajectory categories, with effect sizes significantly highest for persistent depression. Both subthreshold and persistent depression trajectories were significant predictors of morbidity/mortality (e.g. persistent depression OR=2.4, 95% CI=1.8-3.1, relative to never depressed). Causality cannot be inferred from these associations. We had no measures of history of depression or treatments, which may affect associations. Theoretical vulnerabilities predicted depression trajectories, which in turn predicted increased morbidity/mortality, demonstrating for the first time a potential longitudinal chain of events post-ACS. This longitudinal model has important practical implications as clinicians can use vulnerability measures to identify those at most risk of poor outcomes. Copyright © 2015. Published by Elsevier B.V.

Effects of neural progenitor cells on post-stroke neurological impairment—a detailed and comprehensive analysis of behavioral tests

PubMed Central

Doeppner, Thorsten R.; Kaltwasser, Britta; Bähr, Mathias; Hermann, Dirk M.

2014-01-01

Systemic transplantation of neural progenitor cells (NPCs) in rodents reduces functional impairment after cerebral ischemia. In light of upcoming stroke trials regarding safety and feasibility of NPC transplantation, experimental studies have to successfully analyze the extent of NPC-induced neurorestoration on the functional level. However, appropriate behavioral tests for analysis of post-stroke motor coordination deficits and cognitive impairment after NPC grafting are not fully established. We therefore exposed male C57BL6 mice to either 45 min (mild) or 90 min (severe) of cerebral ischemia, using the thread occlusion model followed by intravenous injection of PBS or NPCs 6 h post-stroke with an observation period of three months. Post-stroke motor coordination was assessed by means of the rota rod, tight rope, corner turn, inclined plane, grip strength, foot fault, adhesive removal, pole test and balance beam test, whereas cognitive impairment was analyzed using the water maze, the open field and the passive avoidance test. Significant motor coordination differences after both mild and severe cerebral ischemia in favor of NPC-treated mice were observed for each motor coordination test except for the inclined plane and the grip strength test, which only showed significant differences after severe cerebral ischemia. Cognitive impairment after mild cerebral ischemia was successfully assessed using the water maze test, the open field and the passive avoidance test. On the contrary, the water maze test was not suitable in the severe cerebral ischemia paradigm, as it too much depends on motor coordination capabilities of test mice. In terms of both reliability and cost-effectiveness considerations, we thus recommend the corner turn, foot fault, balance beam, and open field test, which do not depend on durations of cerebral ischemia. PMID:25374509

Residual disease at the bronchial stump is positively associated with the risk of bronchoplerual fistula in patients undergoing lung cancer surgery: a meta-analysis

PubMed Central

Li, Shuangjiang; Fan, Jun; Zhou, Jian; Ren, Yutao; Shen, Cheng; Che, Guowei

2016-01-01

OBJECTIVES Residual disease at the bronchial stump (RDBS) is regarded as an important factor possibly resulting in bronchopleural fistula (BPF) after lung cancer surgery, but this has not been confirmed. We conducted this meta-analysis to evaluate the effects of RDBS on BPF formation in patients undergoing lung cancer surgery. METHODS PubMed and EMBASE databases were searched for full-text articles that met our eligibility criteria. Odds ratios (ORs) with 95% confidence interval (95% CI) served as the summarized outcomes. Q-test and I2 statistic were used to evaluate the level of heterogeneity, determining the fixed-effect model or random-effect model for quantitative synthesis. Sensitivity analysis was conducted to identify the possible origins of heterogeneity. The publication bias was assessed by Begg's test. RESULTS A total of eight retrospective observational studies were included in our meta-analysis. In overall analysis, the pooled outcomes indicated that RDBS was significantly associated with BPF formation after lung cancer surgery (OR: 3.12; 95% CI: 1.72–5.64; P < 0.001). In subgroup analysis, the pooled outcomes revealed a significantly increased risk of post-pneumonectomy BPF in patients with RDBS (OR: 2.78; 95% CI: 1.06–7.28; P = 0.037). The subgroup analysis assessing the effects of RDBS on post-lobectomy BPF was given up due to the scarcity of available data. No heterogeneity was revealed within this meta-analysis. No evidence for publication bias was detected by Begg's test. CONCLUSIONS Our meta-analysis indicates that RDBS is positively associated with the increased risk of BPF in patients undergoing lung cancer surgery. The further analysis also reveals an increased risk of post-pneumonectomy BPF in patients with RDBS. More accurate and comprehensive evidence should be collected and summarized in updated meta-analyses. PMID:26614527

Testing Predictions of the Interactive Activation Model in Recovery from Aphasia after Treatment

ERIC Educational Resources Information Center

Jokel, Regina; Rochon, Elizabeth; Leonard, Carol

2004-01-01

This paper presents preliminary results of pre- and post-treatment error analysis from an aphasic patient with anomia. The Interactive Activation (IA) model of word production (Dell, Schwartz, Martin, Saffran, & Gagnon, 1997) is utilized to make predictions about the anticipated changes on a picture naming task and to explain emerging patterns.…

Warrior Injury Assessment Manikin (WIAMan) Lumbar Spine Model Validation: Development, Testing, and Analysis of Physical and Computational Models of the WIAMan Lumbar Spine Materials Demonstrator

DTIC Science & Technology

2016-08-01

load. The 1 and 10 s-1 rate tests were run on a hydraulic high-rate Instron MTS (8821S), placed in a custom- designed tension fixture (Fig. 8...lateral compression prior to shear testing . The sides of the coupon rest on blocks at the bottom of the vice jaw to allow for travel of the center post ...mode of failure based on the lap shear testing . However, since the pretest spine survived all hits at the BRC speeds, it was decided to proceed with

Students' perceptions of the interprofessional team in practice through the application of servant leadership principles.

PubMed

Neill, Mark; Hayward, Karen S; Peterson, Teri

2007-08-01

This study examined students' perceptions of interprofessional practice within a framework of servant leadership principles, applied in the care of rural older adults utilizing a service learning model. Mobile wellness services were provided through the Idaho State University Senior Health Mobile project in a collaborative team approach in the community-based setting. Students from varied health professional programs were placed in teams for the provision of wellness care, with communication among team members facilitated by a health professions faculty member serving as field coordinator. The Interdisciplinary Education Perception Scale (IEPS) was used to measure students' perceptions of interprofessional practice using a pretest post-test research design. Multivariate analysis was performed revealing a significant pretest to post-test effect on students' perceptions as measured by factors inherent in the IEPS and deemed essential to effective interprofessional practice. Univariate analysis revealed a significant change in students' perception of professional competence and autonomy, actual cooperation and resource sharing within and across professions, and an understanding of the value and contributions of other professionals from pretest to post-test.

A finite element study of teeth restored with post and core: Effect of design, material, and ferrule.

PubMed

Upadhyaya, Viram; Bhargava, Akshay; Parkash, Hari; Chittaranjan, B; Kumar, Vivek

2016-01-01

Different postdesigns and materials are available; however, no consensus exists regarding superiority for stress distribution. The aim of this study was to evaluate the effect of design and material of post with or without ferrule on stress distribution using finite element analysis. A total of 12 three-dimensional (3D) axisymmetric models of postretained central incisors were made: Six with ferrule design and six without it. Three of these six models had tapered posts, and three had parallel posts. The materials tested were titanium post with a composite resin core, nickel chromium cast post and core, and fiber reinforced composite (FRC) post with a composite resin core. The stress analysis was done using ANSYS software. The load of 100 N at an angle of 45΀ was applied 2 mm cervical to incisal edge on the palatal surface and results were analyzed using 3D von Mises criteria. The highest amount of stress was in the cervical region. Overall, the stress in the tapered postsystem was more than the parallel one. FRC post and composite resin core recorded minimal stresses within the post but the stresses transmitted to cervical dentin were more as compared to other systems. Minimal stresses in cervical dentine were observed where the remaining coronal dentin was strengthen by ferrule. A rigid material with high modulus of elasticity for post and core system creates most uniform stress distribution pattern. Ferrule provides uniform distribution of stresses and decreases the cervical stresses.

26th International Symposium on Ballistics

DTIC Science & Technology

2011-09-16

judicious use of analytical predictions correlated with ballistic testing and post - test failure morphology investigations. •Our approach...ballistic predictions. The numerical predictions correlate well with the damage pattern. Post - Test Morphology Simulation Imbedded Steel Plate Removed Post ... Test •Numerical simulation of damage to embedded steel plate compares well with the post - test plate morphology •Multi-strike modeling in work

Applying the transtheoretical model to promote functional fitness of community older adults participating in elastic band exercises.

PubMed

Yang, Hui-Ju; Chen, Kuei-Min; Chen, Ming-De; Wu, Hui-Chuan; Chang, Wen-Jane; Wang, Yueh-Chin; Huang, Hsin-Ting

2015-10-01

The transtheoretical model was applied to promote behavioural change and test the effects of a group senior elastic band exercise programme on the functional fitness of community older adults in the contemplation and preparation stages of behavioural change. Forming regular exercise habits is challenging for older adults. The transtheoretical model emphasizes using different strategies in various stages to facilitate behavioural changes. Quasi-experimental design with pre-test and post-tests on two groups. Six senior activity centres were randomly assigned to either the experimental or control group. The data were collected during 2011. A total of 199 participants were recruited and 169 participants completed the study (experimental group n = 84, control group n = 85). The elastic band exercises were performed for 40 minutes, three times per week for 6 months. The functional fitness of the participants was evaluated at baseline and at the third and sixth month of the intervention. Statistical analyses included a two-way mixed design analysis of variance, one-way repeated measures analysis of variance and an analysis of covariance. All of the functional fitness indicators had significant changes at post-tests from pre-test in the experimental group. The experimental group had better performances than the control group in all of the functional fitness indicators after three months and 6 months of the senior elastic band exercises. The exercise programme provided older adults with appropriate strategies for maintaining functional fitness, which improved significantly after the participants exercising regularly for 6 months. © 2015 John Wiley & Sons Ltd.

Multiple comparison analysis testing in ANOVA.

PubMed

McHugh, Mary L

2011-01-01

The Analysis of Variance (ANOVA) test has long been an important tool for researchers conducting studies on multiple experimental groups and one or more control groups. However, ANOVA cannot provide detailed information on differences among the various study groups, or on complex combinations of study groups. To fully understand group differences in an ANOVA, researchers must conduct tests of the differences between particular pairs of experimental and control groups. Tests conducted on subsets of data tested previously in another analysis are called post hoc tests. A class of post hoc tests that provide this type of detailed information for ANOVA results are called "multiple comparison analysis" tests. The most commonly used multiple comparison analysis statistics include the following tests: Tukey, Newman-Keuls, Scheffee, Bonferroni and Dunnett. These statistical tools each have specific uses, advantages and disadvantages. Some are best used for testing theory while others are useful in generating new theory. Selection of the appropriate post hoc test will provide researchers with the most detailed information while limiting Type 1 errors due to alpha inflation.

Intra-Articular Lubricin Gene Therapy for Post-Traumatic Arthritis

DTIC Science & Technology

2017-09-01

and test non-viral substitutes for AAV before proceeding to a large animal model. 2. KEYWORDS: ACL transection, post -traumatic OA, PRG4, lubricin...16 weeks post ACLT (months 20-26, 4/15/16 – 11/14/16, completed April 2017); o Subtask 2: Drawer test immediately post -euthanasia (months 20-26, 4/15... testing device for measuring rabbit knee laxity post -ACLT. He aided in the continuation of the drawer testing (troubleshooting, analyzing drawer testing

Dynamic posture analysis of Spacelab-1 crew members

NASA Technical Reports Server (NTRS)

Anderson, D. J.; Reschke, M. F.; Homick, J. E.; Werness, S. A.

1986-01-01

Dynamic posture testing was conducted on the science crew of the Spacelab-1 mission on a single axis linear motion platform. Tests took place in pre- and post-flight sessions lasting approximately 20 min each. The pre-flight tests were widely spaced over the several months prior to the mission while the post-flight tests were conducted over the first, second, fourth, and sixth days after landing. Two of the crew members were also tested on the day of landing. Consistent with previous postural testing conducted on flight crews, these crew members were able to complete simple postural tasks to an acceptable level even in the first few hours after landing. Our tests were designed to induce dynamic postural responses using a variety of stimuli and from these responses, evaluate subtle changes in the postural control system which had occurred over the duration of the flight. Periodic sampling post-flight allowed us to observe the time course of readaptation to terrestrial life. Our observations of hip and shoulder position, when subjected to careful analysis, indicated modification of the postural response from pre- to post-flight and that demonstrable adjustments in the dynamic control of their postural systems were taking place in the first few days after flight. For transient stimuli where the platform on which they were asked to stand quickly moved a few centimeters fore or aft then stopped, ballistic or open loop 'programs' would closely characterize the response. During these responses the desired target position was not always achieved and of equal importance not always properly corrected some 15 seconds after the platform ceased to move. The persistent observation was that the subjects had a much stronger dependence on visual stabilization post-flight than pre-flight. This was best illustrated by a slow or only partial recovery to an upward posture after a transient base-of-support movement with eyes open. Postural responses to persistent wideband pseudorandom base-of-support translation were modeled as time invarient linear systems arrived at by Kalman adaptive filter techniques. Derived model parameters such as damping factor and fundamental frequency of the closed loop system showed significant modification between pre- and post-flight. This phenomenon is best characterized by movement of the poles toward increasing stability. While pre-flight data tended to show shoulders and hips moving in phase with each other, post-flight data showed a more disjoint behavior.(ABSTRACT TRUNCATED AT 400 WORDS).

Effect of restoration technique on stress distribution in roots with flared canals: an FEA study.

PubMed

Belli, Sema; Eraslan, Öznur; Eraslan, Oğuz; Eskitaşcıoğlu, Gürcan

2014-04-01

The aim of this finite element analysis (FEA) study was to test the effect of different restorative techniques on stress distribution in roots with flared canals. Five three-dimensional (3D) FEA models that simulated a maxillary incisor with excessive structure loss and flared root canals were created and restored with the following techniques/materials: 1) a prefabricated post: 2) one main and two accessory posts; 3) i-TFC post-core (Sun Medical); 4) the thickness of the root was increased by using composite resin and the root was then restored using a prefabricated post; 5) an anatomic post was created by using composite resin and a prefabricated glass-fiber post. Composite cores and ceramic crowns were created. A 300-N static load was applied at the center of the palatal surface of the tooth to calculate stress distributions. SolidWorks/Cosmosworks structural analysis programs were used for FEA analysis. The analysis of the von Mises and tensile stress values revealed that prefabricated post, accessory post, and i-TFC post systems showed similar stress distributions. They all showed high stress areas at the buccal side of the root (3.67 MPa) and in the cervical region of the root (> 3.67 MPa) as well as low stress accumulation within the post space (0 to 1 MPa). The anatomic post kept the stress within its body and directed less stress towards the remaining tooth structure. The creation of an anatomic post may save the remaining tooth structure in roots with flared canals by reducing the stress levels.

FEM analysis of different dental root canal-post systems in young permanent teeth.

PubMed

Vitale, M C; Chiesa, M; Coltellaro, F; Bignardi, C; Celozzi, M; Poggio, C

2008-09-01

Aim of this work was to carry out a comparative evaluation of the structural behaviour of different root canal posts (cylindrical, conical and triple conical) fitted in a second lower bicuspid and subjected to compression and bending test. This study has been carried out by numerical method of structural analysis of finite elements (FEM, Finite Element Method). Different tridimensional models were obtained by CAT images of an extracted tooth, endodontically treated, filled with guttapercha and triple conical glass post. Images have been elaborated by a software for images (Mimics and Ansys) and CAD (Rhinoceros 3 D). In the models a II Class restoration has been virtually created. In the numerical simulation dental tissues (enamel, dentine and root cement), guttapercha, root canal cement, different posts, different techniques of cementation and crown restoration (composites and adhesive systems) have been considered. Strain distributions in dental tissues, in root canal cement and in posts have been compared. The equivalent tensions and the single components (traction, compression and cut) have been analysed. In all examined posts, the most strained part is resulted the coronal one, even if the total tension, in the different tooth-post analyzed systems, resulted uniformly distributed. A similar behaviour was shown by the root canal cement. According to the analyzed conditions of bond and load, varying according to the geometry of the considered posts, our results confirm that there is no substantial difference of deformation in posts, root canal cement and treated tooth.

SRG110 Stirling Generator Dynamic Simulator Vibration Test Results and Analysis Correlation

NASA Technical Reports Server (NTRS)

Suarez, Vicente J.; Lewandowski, Edward J.; Callahan, John

2006-01-01

The U.S. Department of Energy (DOE), Lockheed Martin (LM), and NASA Glenn Research Center (GRC) have been developing the Stirling Radioisotope Generator (SRG110) for use as a power system for space science missions. The launch environment enveloping potential missions results in a random input spectrum that is significantly higher than historical RPS launch levels and is a challenge for designers. Analysis presented in prior work predicted that tailoring the compliance at the generator-spacecraft interface reduced the dynamic response of the system thereby allowing higher launch load input levels and expanding the range of potential generator missions. To confirm analytical predictions, a dynamic simulator representing the generator structure, Stirling convertors and heat sources was designed and built for testing with and without a compliant interface. Finite element analysis was performed to guide the generator simulator and compliant interface design so that test modes and frequencies were representative of the SRG110 generator. This paper presents the dynamic simulator design, the test setup and methodology, test article modes and frequencies and dynamic responses, and post-test analysis results. With the compliant interface, component responses to an input environment exceeding the SRG110 qualification level spectrum were all within design allowables. Post-test analysis included finite element model tuning to match test frequencies and random response analysis using the test input spectrum. Analytical results were in good overall agreement with the test results and confirmed previous predictions that the SRG110 power system may be considered for a broad range of potential missions, including those with demanding launch environments.

SRG110 Stirling Generator Dynamic Simulator Vibration Test Results and Analysis Correlation

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Suarez, Vicente J.; Goodnight, Thomas W.; Callahan, John

2007-01-01

The U.S. Department of Energy (DOE), Lockheed Martin (LM), and NASA Glenn Research Center (GRC) have been developing the Stirling Radioisotope Generator (SRG110) for use as a power system for space science missions. The launch environment enveloping potential missions results in a random input spectrum that is significantly higher than historical radioisotope power system (RPS) launch levels and is a challenge for designers. Analysis presented in prior work predicted that tailoring the compliance at the generator-spacecraft interface reduced the dynamic response of the system thereby allowing higher launch load input levels and expanding the range of potential generator missions. To confirm analytical predictions, a dynamic simulator representing the generator structure, Stirling convertors and heat sources were designed and built for testing with and without a compliant interface. Finite element analysis was performed to guide the generator simulator and compliant interface design so that test modes and frequencies were representative of the SRG110 generator. This paper presents the dynamic simulator design, the test setup and methodology, test article modes and frequencies and dynamic responses, and post-test analysis results. With the compliant interface, component responses to an input environment exceeding the SRG110 qualification level spectrum were all within design allowables. Post-test analysis included finite element model tuning to match test frequencies and random response analysis using the test input spectrum. Analytical results were in good overall agreement with the test results and confirmed previous predictions that the SRG110 power system may be considered for a broad range of potential missions, including those with demanding launch environments.

Test and Analysis of a Hyper-X Carbon-Carbon Leading Edge Chine

NASA Technical Reports Server (NTRS)

Smith, Russell W.; Sikora, Joseph G.; Lindell, Michael C.

2005-01-01

During parts production for the X43A Mach 10 hypersonic vehicle nondestructive evaluation (NDE) of a leading edge chine detected on imbedded delamination near the lower surface of the part. An ultimate proof test was conducted to verify the ultimate strength of this leading edge chine part. The ultimate proof test setup used a pressure bladder design to impose a uniform distributed pressure field over the bi-planar surface of the chine test article. A detailed description of the chine test article and experimental test setup is presented. Analysis results from a linear status model of the test article are also presented and discussed. Post-test inspection of the specimen revealed no visible failures or areas of delamination.

An analytical model for hydraulic fracturing in shallow bedrock formations.

PubMed

dos Santos, José Sérgio; Ballestero, Thomas Paul; Pitombeira, Ernesto da Silva

2011-01-01

A theoretical method is proposed to estimate post-fracturing fracture size and transmissivity, and as a test of the methodology, data collected from two wells were used for verification. This method can be employed before hydrofracturing in order to obtain estimates of the potential hydraulic benefits of hydraulic fracturing. Five different pumping test analysis methods were used to evaluate the well hydraulic data. The most effective methods were the Papadopulos-Cooper model (1967), which includes wellbore storage effects, and the Gringarten-Ramey model (1974), known as the single horizontal fracture model. The hydraulic parameters resulting from fitting these models to the field data revealed that as a result of hydraulic fracturing, the transmissivity increased more than 46 times in one well and increased 285 times in the other well. The model developed by dos Santos (2008), which considers horizontal radial fracture propagation from the hydraulically fractured well, was used to estimate potential fracture geometry after hydrofracturing. For the two studied wells, their fractures could have propagated to distances of almost 175 m or more and developed maximum apertures of about 2.20 mm and hydraulic apertures close to 0.30 mm. Fracturing at this site appears to have expanded and propagated existing fractures and not created new fractures. Hydraulic apertures calculated from pumping test analyses closely matched the results obtained from the hydraulic fracturing model. As a result of this model, post-fracturing geometry and resulting post-fracturing well yield can be estimated before the actual hydrofracturing. Copyright © 2010 The Author(s). Journal compilation © 2010 National Ground Water Association.

75 FR 1179 - Passenger Equipment Safety Standards; Front End Strength of Cab Cars and Multiple-Unit Locomotives

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... Dynamic and Quasi-Static Testing in 2008 a. Test Article Design b. Dynamic Testing of a Collision Post c... requirements concerning structural deformation and energy absorption by collision posts and corner posts at the... Testing in 2002 a. Test Article Designs b. Dynamic Impact Testing c. Analysis 2. Industry-Sponsored Quasi...

The Impact of a Social Marketing Campaign on HIV and Sexually Transmissible Infection Testing Among Men Who Have Sex With Men in Australia.

PubMed

Wilkinson, Anna L; Pedrana, Alisa E; El-Hayek, Carol; Vella, Alyce M; Asselin, Jason; Batrouney, Colin; Fairley, Christopher K; Read, Tim R H; Hellard, Margaret; Stoové, Mark

2016-01-01

In response to increasing HIV and other sexually transmissible infection (HIV/STI) notifications in Australia, a social marketing campaign Drama Downunder (DDU) was launched in 2008 to promote HIV/STI testing among men who have sex with men (MSM). We analyzed prospective data from (1) an online cohort of MSM and (2) clinic-level HIV/STI testing to evaluate the impact of DDU on HIV, syphilis, gonorrhea, and chlamydia testing. (1) Cohort participants who completed 3 surveys (2010-2014) contributed to a Poisson regression model examining predictors of recent HIV testing.(2) HIV, syphilis, gonorrhea, and chlamydia tests among MSM attending high caseload primary care clinics (2007-2013) were included in an interrupted time series analysis. (1) Although campaign awareness was high among 242 MSM completing 726 prospective surveys, campaign recall was not associated with self-reported HIV testing. Reporting previous regular HIV testing (adjusted incidence rate ratio, 2.4; 95% confidence interval, 1.3-4.4) and more than 10 partners in the previous 6 months (adjusted incidence rate ratio, 1.2; 95% confidence interval, 1.1-1.4) was associated with recent HIV testing. (2) Analysis of 257,023 tests showed increasing monthly HIV, syphilis, gonorrhea, and chlamydia tests pre-DDU. Post-DDU, gonorrhea test rates increased significantly among HIV-negative MSM, with modest and nonsignificant increasing rates of HIV, syphilis, and chlamydia testing. Among HIV-positive MSM, no change in gonorrhea or chlamydia testing occurred and syphilis testing declined significantly. Increasing HIV/STI testing trends among MSM occurred pre- and post-DDU, coinciding with other plausible drivers of testing. Modest changes in HIV testing post-DDU suggest that structural changes to improve testing access may need to occur alongside health promotion to increase testing frequency.

Effect of fiber post length and abutment height on fracture resistance of endodontically treated premolars prepared for zirconia crowns.

PubMed

Lin, Jie; Matinlinna, Jukka Pekka; Shinya, Akikazu; Botelho, Michael George; Zheng, Zhiqiang

2018-04-01

The purpose of this study was to compare the fracture resistance, mode of fracture, and stress distribution of endodontically treated teeth prepared with three different fiber post lengths and two different abutment heights, using both experimental and finite element (FE) approaches. Forty-eight human maxillary premolars with two roots were selected and endodontically treated. The teeth were randomly distributed into six equally sized groups (n = 8) with different combinations of post lengths (7.5, 11, and 15 mm) and abutment heights (3 and 5 mm). All the teeth restored with glass fiber post (Rely X Fiber Post, 3M ESPE, USA) and a full zirconia crown. All the specimens were thermocycled and then loaded to failure at an oblique angle of 135°. Statistical analysis was performed for the effects of post length and abutment height on failure loads using ANOVA and Tukey's honestly significant difference test. In addition, corresponding FE models of a premolar restored with a glass fiber post were developed to examine mechanical responses. The factor of post length (P < 0.01) had a significant effect on failure load. The abutment height (P > 0.05) did not have a significant effect on failure load. The highest mean fracture resistance was recorded for the 15 mm post length and 5 mm abutment height test group, which was significantly more resistant to fracture than the 7.5 mm post and 5 mm abutment height group (P < 0.05). The FE analysis showed the peak compression and tension stress values of 7.5 mm post length were higher than that of 11 and 15 mm post length. The stress value of remaining tooth decreased as the post length was increased. Within the limitations of this experimental and FE analysis study, increasing the post length inside the root of endodontically treated premolar teeth restored with glass-fiber posts increase the fracture resistance to non-axial forces. Failure mode is more favorable with reduced abutment heights.

Telomere length and telomere repeating factors: Cellular markers for post-traumatic stress disorder-like model.

PubMed

Dong, Yuanjun; Zhang, Guiqing; Yuan, Xiuyu; Zhang, Yueqi; Hu, Min

2016-05-01

The aim of the present study was to explore the telomere length of peripheral blood leukocytes from a rat model of post-traumatic stress disorder (PTSD), as well as the expression level of telomere-binding protein in the hippocampal CA1 region. The PTSD model was established with 42 adult male Wistar rats. The relative telomere length of the leukocytes was measured by real-time fluorescence quantitative polymerase chain reaction, and the expression levels of telomere repeating factor 1 (TRF1) and telomere repeating factor 2 (TRF2) in the hippocampal CA1 region of the PTSD rat model were determined by immunofluorescence technology. The covariance analysis of repeated measurements by the mixed model approach was used for the telomere length analysis. The comparison of averaged data among groups was performed using least significant difference and analysis of variance. The Student's t test or the Mann-Whitney U test was used for intragroup comparison. The association study among groups was conducted using the Spearman test. The shortening speed of telomere length significantly accelerated in rats after Single Prolonged Stress (SPS) stimulation (P<0.05). The expression levels of TRF1 and TRF2 increased with the progress of PTSD, and the expression peak was shown in day 14, which was significantly different from the control group (P<0.05). The shortening speed of the telomere length of peripheral blood leukocytes accelerated in PTSD rats, and the expression levels of TRF1 and TRF2 increased in hippocampus, both of which were closely associated with the pathological progress of the PTSD-like model and unfavorable prognosis. Copyright © 2016 Elsevier B.V. All rights reserved.

The Relationship of Complex Post-traumatic Stress Disorder and Post-traumatic Stress Disorder in a Culturally Distinct, Conflict-Affected Population: A Study among West Papuan Refugees Displaced to Papua New Guinea.

PubMed

Silove, Derrick; Tay, Alvin Kuowei; Kareth, Moses; Rees, Susan

2017-01-01

Controversy continues about the validity of the construct of complex post-traumatic stress disorder (C-PTSD). In particular, questions remain whether C-PTSD can be differentiated from post-traumatic stress disorder (PTSD) and, secondarily, other common mental disorders. The examination of these issues needs to be expanded to populations of diverse cultural backgrounds exposed to prolonged persecution. We undertake such an inquiry among a community sample of West Papuan refugees exposed to extensive persecution and trauma. We interviewed over 300 West Papuan refugees using the Refugee-Mental Health Assessment Package to record symptoms of PTSD, C-PTSD, major depressive disorder (MDD), and complex grief (CG). We used first- and second-order confirmatory factor analysis (CFA) to test aspects of the convergent and discriminant validity of C-PTSD. The CFA analysis supported both a one-factor and two-factor model of PTSD and C-PTSD. Nested model comparison tests provide support for the parsimonious one-factor model solution. A second-order CFA model of PTSD and C-PTSD produced a poor fit. The modified three-factor multi-disorder solution combining a traumatic stress (TS) factor (amalgamating PTSD and C-PTSD), MDD, and CG yielded a good fit only after removing three CG domains (estrangement, yearning, and behavioral change), a model that produced large standardized residuals (>0.20). The most parsimonious model yielded a single TS factor combining symptom domains of C-PTSD and PTSD in this culturally distinct community exposed to extensive persecution and conflict-related trauma. There may be grounds for expanding the scope of psychological treatments for refugees to encompass this wider TS response. Our findings are consistent with theoretical frameworks focusing on the wider TS reaction of refugees exposed to human rights-related traumas of mass conflict, persecution, and displacement.

Examples of finite element mesh generation using SDRC IDEAS

NASA Technical Reports Server (NTRS)

Zapp, John; Volakis, John L.

1990-01-01

IDEAS (Integrated Design Engineering Analysis Software) offers a comprehensive package for mechanical design engineers. Due to its multifaceted capabilities, however, it can be manipulated to serve the needs of electrical engineers, also. IDEAS can be used to perform the following tasks: system modeling, system assembly, kinematics, finite element pre/post processing, finite element solution, system dynamics, drafting, test data analysis, and project relational database.

Intention to comply with post-exposure management among nurses exposed to blood and body fluids in Taiwan: application of the theory of planned behaviour.

PubMed

Ko, N-Y; Yeh, S-H; Tsay, S-L; Ma, H-J; Chen, C-H; Pan, S-M; Feng, M-C; Chiang, M-C; Lee, Y-W; Chang, L-H; Jang, J-F

2011-04-01

Nurses are at significant risk from occupationally acquired bloodborne virus infections following a needlestick and sharps injury. This study aimed to apply the theory of planned behaviour (TPB) to predict nurses' intention to comply with occupational post-exposure management. A cross-sectional survey was applied to select registered nurses who worked in human immunodeficiency virus (HIV)-designated hospitals. An anonymous, self-administered questionnaire based on the TPB was distributed to 1630 nurses and 1134 (69.5%) questionnaires were returned. From these, a total of 802 nurses (71%) reported blood and body fluid exposure incidents during 2003-2005 and this group was used for analysis. Only 44.6% of the 121 exposed nurses who were prescribed post-exposure prophylaxis (PEP) by infectious disease doctors returned to the clinic for interim monitoring, and only 56.6% of exposed nurses confirmed their final serology status. Structural equation modelling was used to test the TPB indicating perceived behavioural control (the perception of the difficulty or ease of PEP management, β=0.58), subjective norm (the perception of social pressure to adhere to PEP, β=0.15), and attitudes (β=0.12) were significant direct effects on nurses' intention to comply with post-exposure management. The hypothesised model test indicated that the model fitted with the expected relationships and directions of theoretical constructs [χ(2) (14, N=802)=23.14, P=0.057, GFI=0.987, RMSEA=0.039]. The TPB model constructs accounted for 54% of the variance in nurses' intention to comply with post-exposure management. The TPB is an appropriate model for predicting nurses' intention to comply with post-exposure management. Healthcare facilities should have policies to decrease the inconvenience of follow-up to encourage nurses to comply with post-exposure management. Copyright © 2010 the Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Pre-Hurricane Perceived Social Support Protects Against Psychological Distress: A Longitudinal Analysis of Low-Income Mothers

PubMed Central

Lowe, Sarah R.; Chan, Christian S.; Rhodes, Jean E.

2013-01-01

Objective In this study, we examined the influence of pre-disaster perceived social support on post-disaster psychological distress among survivors of Hurricane Katrina. Method Participants (N = 386) were low-income mothers between 18 and 34 years of age at baseline (M = 26.4, SD = 4.43). The majority (84.8%) was African American; 10.4% identified as Caucasian, 3.2% identified as Hispanic, and 1.8% identified as other. Participants were enrolled in an educational intervention study in 2004 and 2005. Those who had completed a 1-year follow-up assessment prior to Hurricane Katrina were reassessed approximately 1 year after the hurricane. Measures of perceived social support and psychological distress were included in pre-and post-disaster assessments. Using structural equation modeling and multiple mediator analysis, we tested a model wherein pre-disaster perceived social support predicted post-disaster psychological distress both directly and indirectly through its effects on pre-disaster psychological distress, exposure to hurricane-related stressors, and post-disaster perceived social support. We predicted that higher pre-disaster perceived social support would be predictive of lower pre-disaster psychological distress, lower hurricane-related stressors, and higher post-disaster perceived social support, and that these variables would, in turn, predict lower post-disaster psychologically distress. Results Our analyses provide partial support for the hypothesized model. Although pre-disaster perceived social support did not exert a direct effect on post-disaster psychological distress, the indirect effects of all 3 proposed mediators were significant. Conclusions Pre-disaster social support can decrease both exposure to natural disasters and the negative psychological effects of natural disaster exposure. These findings underscore the importance of bolstering the post-disaster social support networks of low-income mothers. PMID:20658811

In vitro evaluation of endodontic posts.

PubMed

Drummond, J L

2000-05-01

To compare stainless steel posts and three different fibrous posts with respect to pullout (shear) strength from extracted third molars embedded in denture acrylic. Post space was prepared and the posts cemented with a resin cement according to manufacturer's instructions. Single step and multi-step dentin bonding systems were also evaluated. The testing was in tension at a loading rate of 2 mm/min. The statistical analysis indicated no significant difference in the pullout (shear) strength between any of the post groups tested. Also evaluated was the flexure strength of the fibrous posts before and after thermal cycling. Statistical analysis indicated a significant decrease in flexure strength for the respective fibrous posts following thermal cycling.

Post-exposure treatment of non-human primates lethally infected with Ebola virus with EBOTAb, a purified ovine IgG product.

PubMed

Dowall, Stuart D; Jacquot, Frédéric; Landon, John; Rayner, Emma; Hall, Graham; Carbonnelle, Caroline; Raoul, Hervé; Pannetier, Delphine; Cameron, Ian; Coxon, Ruth; Al Abdulla, Ibrahim; Hewson, Roger; Carroll, Miles W

2017-06-22

Despite sporadic outbreaks of Ebola virus (EBOV) over the last 4 decades and the recent public health emergency in West Africa, there are still no approved vaccines or therapeutics for the treatment of acute EBOV disease (EVD). In response to the 2014 outbreak, an ovine immunoglobulin therapy was developed, termed EBOTAb. After promising results in the guinea pig model of EBOV infection, EBOTAb was tested in the cynomolgus macaque non-human primate model of lethal EBOV infection. To ensure stringent therapeutic testing conditions to replicate likely clinical usage, EBOTAb was first delivered 1, 2 or 3 days post-challenge with a lethal dose of EBOV. Results showed a protective effect of EBOTAb given post-exposurally, with survival rates decreasing with increasing time after challenge. Viremia results demonstrated that EBOTAb resulted in a decreased circulation of EBOV in the bloodstream. Additionally, assay of liver enzymes and histology analysis of local tissues identified differences between EBOTAb-treated and untreated groups. The results presented demonstrate that EBOTAb conferred protection against EBOV when given post-exposure and should be explored and developed further as a potential intervention strategy for future outbreaks, which are likely to occur.

Quantifying post-fire fallen trees using multi-temporal lidar

NASA Astrophysics Data System (ADS)

Bohlin, Inka; Olsson, Håkan; Bohlin, Jonas; Granström, Anders

2017-12-01

Massive tree-felling due to root damage is a common fire effect on burnt areas in Scandinavia, but has so far not been analyzed in detail. Here we explore if pre- and post-fire lidar data can be used to estimate the proportion of fallen trees. The study was carried out within a large (14,000 ha) area in central Sweden burnt in August 2014, where we had access to airborne lidar data from both 2011 and 2015. Three data-sets of predictor variables were tested: POST (post-fire lidar metrics), DIF (difference between post- and pre-fire lidar metrics) and combination of those two (POST_DIF). Fractional logistic regression was used to predict the proportion of fallen trees. Training data consisted of 61 plots, where the number of fallen and standing trees was calculated both in the field and with interpretation of drone images. The accuracy of the best model was tested based on 100 randomly selected validation plots with a size of 25 × 25 m. Our results showed that multi-temporal lidar together with field-collected training data can be used for quantifying post-fire tree felling over large areas. Several height-, density- and intensity metrics correlated with the proportion of fallen trees. The best model combined metrics from both datasets (POST_DIF), resulting in a RMSE of 0.11. Results were slightly poorer in the validation plots with RMSE of 0.18 using pixel size of 12.5 m and RMSE of 0.15 using pixel size of 6.25 m. Our model performed least well for stands that had been exposed to high-intensity crown fire. This was likely due to the low amount of echoes from the standing black tree skeletons. Wall-to-wall maps produced with this model can be used for landscape level analysis of fire effects and to explore the relationship between fallen trees and forest structure, soil type, fire intensity or topography.

Tri-Center Analysis: Determining Measures of Trichotomous Central Tendency for the Parametric Analysis of Tri-Squared Test Results

ERIC Educational Resources Information Center

Osler, James Edward

2014-01-01

This monograph provides an epistemological rational for the design of a novel post hoc statistical measure called "Tri-Center Analysis". This new statistic is designed to analyze the post hoc outcomes of the Tri-Squared Test. In Tri-Center Analysis trichotomous parametric inferential parametric statistical measures are calculated from…

Association of pre-operative medication use with post-operative delirium in surgical oncology patients receiving comprehensive geriatric assessment.

PubMed

Jeong, Young Mi; Lee, Eunsook; Kim, Kwang-Il; Chung, Jee Eun; In Park, Hae; Lee, Byung Koo; Gwak, Hye Sun

2016-07-07

Older patients undergoing surgery tend to have a higher frequency of delirium. Delirium is strongly associated with poor surgical outcomes. This study evaluated the association between pre-operative medication use and post-operative delirium (POD) in surgical oncology patients receiving comprehensive geriatric assessment (CGA). A total of 475 patients who were scheduled for cancer surgery and received CGA from January 2014 to June 2015 were included. Pre-operative medication review through CGA was conducted on polypharmacy (≥5 medications), delirium-inducing medications (DIMs), fall-inducing medications (FIMs), and potentially inappropriate medications (PIMs). POD was confirmed by psychiatric consultation, and DSM-V criteria were used for diagnosing delirium. The model fit of the prediction model was assessed by computing the Hosmer-Lemeshow goodness-of-fit test. Effect size was measured using the Nagelkerke R(2). Discrimination of the model was assessed by an analysis of the area under receiver operating curve (AUROC). Two models were constructed for multivariate analysis based on univariate analysis; model I included dementia and DIM in addition to age and sex, and model II included PIM instead of DIM of model I. Every one year increase of age increased the risk of POD by about 1.1-fold. DIM was a significant factor for POD after adjusting for confounders (AOR 12.78, 95 % CI 2.83-57.74). PIM was also a significant factor for POD (AOR 5.53, 95 % CI 2.03-15.05). The Hosmer-Lemeshow test results revealed good fits for both models (χ(2) = 3.842, p = 0.871 for model I and χ(2) = 8.130, p = 0.421 for model II). The Nagelkerke R(2) effect size and AUROC for model I was 0.215 and 0.833, respectively. Model II had the Nagelkerke R(2)effect size of 0.174 and AUROC of 0.819. These results suggest that pharmacists' comprehensive review for pre-operative medication use is critical for the post-operative outcomes like delirium in older patients.

Assessment of vaccine testing at three laboratories using the guinea pig model of tuberculosis.

PubMed

Grover, Ajay; Troudt, Jolynn; Arnett, Kimberly; Izzo, Linda; Lucas, Megan; Strain, Katie; McFarland, Christine; Hall, Yper; McMurray, David; Williams, Ann; Dobos, Karen; Izzo, Angelo

2012-01-01

The guinea pig model of tuberculosis is used extensively in different locations to assess the efficacy of novel tuberculosis vaccines during pre-clinical development. Two key assays are used to measure protection against virulent challenge: a 30 day post-infection assessment of mycobacterial burden and long-term post-infection survival and pathology analysis. To determine the consistency and robustness of the guinea pig model for testing vaccines, a comparative assessment between three sites that are currently involved in testing tuberculosis vaccines from external providers was performed. Each site was asked to test two "subunit" type vaccines in their routine animal model as if testing vaccines from a provider. All sites performed a 30 day study, and one site also performed a long-term survival/pathology study. Despite some differences in experimental approach between the sites, such as the origin of the Mycobacterium tuberculosis strain and the type of aerosol exposure device used to infect the animals and the source of the guinea pigs, the data obtained between sites were consistent in regard to the ability of each "vaccine" tested to reduce the mycobacterial burden. The observations also showed that there was good concurrence between the results of short-term and long-term studies. This validation exercise means that efficacy data can be compared between sites. Copyright © 2011 Elsevier Ltd. All rights reserved.

Service-learning's impact on dental students' attitude towards community service.

PubMed

Coe, J M; Best, A M; Warren, J J; McQuistan, M R; Kolker, J L; Isringhausen, K T

2015-08-01

This study evaluated service-learning programme's impact on senior dental students' attitude towards community service at Virginia Commonwealth University (VCU) School of Dentistry. Experience gained through service-learning in dental school may positively impact dental students' attitude towards community service that will eventually lead into providing care to the underserved. Two surveys (pre- and post-test) were administered to 105 senior dental students. For the first survey (post-test), seventy-six students of 105 responded and reported their attitude towards community service immediately after the service-learning programme completion. Three weeks later, 56 students of the 76 responded to the second survey (retrospective pre-test) and reported their recalled attitude prior to the programme retrospectively. A repeated-measure mixed-model analysis indicated that overall there was improvement between pre-test and post-test. Scales of connectedness, normative helping behaviour, benefits, career benefits and intention showed a significant pre-test and post-test difference. An association between attitude towards community service and student characteristics such as age, gender, ethnicity and volunteer activity was also examined. Only ethnicity showed an overall significant difference. White dental students appear to have a differing perception of the costs of community service. The service-learning programme at VCU School of Dentistry has positively impacted senior dental students' attitude towards community service. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Service-learning’s Impact on Dental Students’ Attitude toward Community Service

PubMed Central

Coe, J. M.; Best, A. M.; Warren, J. J.; McQuistan, M. R.; Kolker, J. L.; Isringhausen, K. T.

2014-01-01

Introduction This study evaluated service-learning program’s impact on senior dental students’ attitude toward community service at Virginia Commonwealth University (VCU) School of Dentistry. Experience gained through service-learning in dental school may positively impact dental students’ attitude toward community service that will eventually lead into providing care to the underserved. Materials and methods Two surveys (pre and post-test) were administered to 105 senior dental students. For the first survey (post-test), seventy six students out of 105 responded and reported their attitude toward community service immediately after the service-learning program completion. Three weeks later, fifty six students out of the 76 responded to the second survey (retrospective pre-test) and reported their recalled attitude prior to the program retrospectively. Results A repeated-measure mixed-model analysis indicated that overall there was improvement between pre-test and post-test. Scales of connectedness, normative helping behavior, benefits1, career benefits, and intention showed a significant pre-test and post-test difference. An association between attitude toward community service and student characteristics such as age, gender, ethnicity, and volunteer activity was also examined. Only ethnicity showed an overall significant difference. White dental students appear to have a differing perception of the costs of community service. Conclusions The service-learning program at VCU School of Dentistry has positively impacted senior dental students’ attitude toward community service. PMID:25142286

Using Dispersed Modes During Model Correlation

NASA Technical Reports Server (NTRS)

Stewart, Eric C.; Hathcock, Megan L.

2017-01-01

The model correlation process for the modal characteristics of a launch vehicle is well established. After a test, parameters within the nominal model are adjusted to reflect structural dynamics revealed during testing. However, a full model correlation process for a complex structure can take months of man-hours and many computational resources. If the analyst only has weeks, or even days, of time in which to correlate the nominal model to the experimental results, then the traditional correlation process is not suitable. This paper describes using model dispersions to assist the model correlation process and decrease the overall cost of the process. The process creates thousands of model dispersions from the nominal model prior to the test and then compares each of them to the test data. Using mode shape and frequency error metrics, one dispersion is selected as the best match to the test data. This dispersion is further improved by using a commercial model correlation software. In the three examples shown in this paper, this dispersion based model correlation process performs well when compared to models correlated using traditional techniques and saves time in the post-test analysis.

A laboratory comparison of individual Targis/Vectris posts with standard fiberglass posts.

PubMed

Corsalini, Massimo; Genovese, Katia; Lamberti, Luciano; Pappalettere, Carmine; Carella, Mauro; Carossa, Stefano

2007-01-01

This article presents an in vitro analysis of a specific occlusal loading test on endodontically treated teeth restored with 2 different composite post materials. Individual, customized posts (IFPs) were compared to standard fiberglass posts (SFPs). The selected IFPs (standard cylindric Targis/Vectris posts) were compared to SFPs (Conic 6% Post, Ghimas). The posts were first subjected to a 3-point bending test to compare their flexural elastic properties. They were then used to restore 22 endodontically treated artificial maxillary central incisors and subjected to a specific occlusal loading simulation test. The loading test showed that IFP restorations performed better than SFP restorations. A clinical evaluation of this laboratory observation is suggested.

School-based prevention program associated with increased short- and long-term retention of safety knowledge.

PubMed

Klas, Karla S; Vlahos, Peter G; McCully, Michael J; Piche, David R; Wang, Stewart C

2015-01-01

Validation of program effectiveness is essential in justifying school-based injury prevention education. Although Risk Watch (RW) targets burn, fire, and life safety, its effectiveness has not been previously evaluated in the medical literature. Between 2007 and 2012, a trained fire service public educator (FSPE) taught RW to all second grade students in one public school district. The curriculum was delivered in 30-minute segments for 9 consecutive weeks via presentations, a safety smoke house trailer, a model-sized hazard house, a student workbook, and parent letters. A written pre-test (PT) was given before RW started, a post-test (PT#1) was given immediately after RW, and a second post-test (PT#2) was administered to the same students the following school year (ranging from 12 to 13 months after PT). Students who did not complete the PT or at least one post-test were excluded. Comparisons were made by paired t-test, analysis of variance, and regression analysis. After 183 (8.7%) were excluded for missing tests, 1,926 remaining students scored significantly higher (P = .0001) on PT#1 (mean 14.8) and PT#2 (mean 14.7) than the PT (mean 12.1). There was 1 FSPE and 36 school teachers with class size ranging from 10 to 27 (mean 21.4). Class size was not predictive of test score improvement (R = 0%), while analysis of variance showed that individual teachers trended toward some influence. This 6-year prospective study demonstrated that the RW program delivered by an FSPE effectively increased short-term knowledge and long-term retention of fire/life safety in early elementary students. Collaborative partnerships are critical to preserving community injury prevention education programs.

Role of observation of live cases done by Japanese experts in the acquisition of ESD skills by a western endoscopist.

PubMed

Draganov, Peter V; Chang, Myron; Coman, Roxana M; Wagh, Mihir S; An, Qi; Gotoda, Takuji

2014-04-28

To evaluate the role of observation of experts performing endoscopic submucosal dissection (ESD) in the acquisition of ESD skills. This prospective study is documenting the learning curve of one Western endoscopist. The study consisted of three periods. In the first period (pre-observation), the trainee performed ESDs in animal models in his home institution in the United States. The second period (observation) consisted of visit to Japan and observation of live ESD cases done by experts. The observation of cases occurred over a 5-wk period. During the third period (post-observation), the trainee performed ESD in animal models in a similar fashion as in the first period. Three animal models were used: live 40-50 kg Yorkshire pig, explanted pig stomach model, and explanted pig rectum model. The outcomes from the ESDs done in the animal models before and after observation of live human cases (main study intervention) were compared. Statistical analysis of the data included: Fisher's exact test to compare distributions of a categorical variable, Wilcoxon rank sum test to compare distributions of a continuous variable between the two groups (pre-observation and post-observation), and Kruskal-Wallis test to evaluate the impact of lesion location and type of model (ex-vivo vs live pig) on lesion removal time. The trainee performed 38 ESDs in animal model (29 pre-observation/9 post-observation). The removal times post-observation were significantly shorter than those pre-observation (32.7 ± 15.0 min vs 63.5 ± 9.8 min, P < 0.001). To minimize the impact of improving physician skill, the 9 lesions post-observation were compared to the last 9 lesions pre-observation and the removal times remained significantly shorter (32.7 ± 15.0 min vs 61.0 ± 7.4 min, P = 0.0011). Regression analysis showed that ESD observation significantly reduced removal time when controlling for the sequence of lesion removal (P = 0.025). Furthermore, it was also noted a trend towards decrease in failure to remove lesions and decrease in complications after the period of observation. This study did not find a significant difference in the time needed to remove lesions in different animal models. This finding could have important implications in designing training programs due to the substantial difference in cost between live animal and explanted organ models. The main limitation of this study is that it reflects the experience of a single endoscopist. Observation of experts performing ESD over short period of time can significantly contribute to the acquisition of ESD skills.

Estimation of Ultimate Tensile Strength of dentin Using Finite Element Analysis from Endodontically Treated Tooth

NASA Astrophysics Data System (ADS)

Sinthaworn, S.; Puengpaiboon, U.; Warasetrattana, N.; Wanapaisarn, S.

2018-01-01

Endodontically treated teeth were simulated by finite element analysis in order to estimate ultimate tensile strength of dentin. Structures of the endodontically treated tooth cases are flared root canal, restored with different number of fiber posts {i.e. resin composite core without fiber post (group 1), fiber post No.3 with resin composite core (group 2) and fiber post No.3 accessory 2 fiber posts No.0 with resin composite core (group 3)}. Elastic modulus and Poisson’s ratio of materials were selected from literatures. The models were loaded by the average fracture resistances load of each groups (group 1: 361.80 N, group 2: 559.46 N, group 3: 468.48 N) at 135 degree angulation in respect to the longitudinal axis of the teeth. The stress analysis and experimental confirm that fracture zone is at dentin area. To estimate ultimate tensile strength of dentin, trial and error of ultimate tensile strength were tested to obtain factor of safety (FOS) equal to 1.00. The result reveals that ultimate tensile strength of dentin of group 1, 2, 3 are 38.89, 30.96, 37.19 MPa, respectively.

Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

NASA Astrophysics Data System (ADS)

Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

1993-08-01

A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH) program

NASA Technical Reports Server (NTRS)

Fayette, Daniel F.; Speicher, Patricia; Stoklosa, Mark J.; Evans, Jillian V.; Evans, John W.; Gentile, Mike; Pagel, Chuck A.; Hakim, Edward

1993-01-01

A joint military-commercial effort to evaluate multichip module (MCM) structures is discussed. The program, Reliability Technology to Achieve Insertion of Advanced Packaging (RELTECH), has been designed to identify the failure mechanisms that are possible in MCM structures. The RELTECH test vehicles, technical assessment task, product evaluation plan, reliability modeling task, accelerated and environmental testing, and post-test physical analysis and failure analysis are described. The information obtained through RELTECH can be used to address standardization issues, through development of cost effective qualification and appropriate screening criteria, for inclusion into a commercial specification and the MIL-H-38534 general specification for hybrid microcircuits.

Benefits of Using Planned Comparisons Rather Than Post Hoc Tests: A Brief Review with Examples.

ERIC Educational Resources Information Center

DuRapau, Theresa M.

The rationale behind analysis of variance (including analysis of covariance and multiple analyses of variance and covariance) methods is reviewed, and unplanned and planned methods of evaluating differences between means are briefly described. Two advantages of using planned or a priori tests over unplanned or post hoc tests are presented. In…

Impact of an incremental running test on jumping kinematics in endurance runners: can jumping kinematic explain the post-activation potentiation phenomenon?

PubMed

García-Pinillos, Felipe; Molina-Molina, Alejandro; Latorre-Román, Pedro Á

2016-06-01

This study aimed to determine whether kinematic data during countermovement jump (CMJ) might explain post-activation potentiation (PAP) phenomenon after an exhausting running test. Thirty-three trained endurance runners performed the Léger Test; an incremental test which consists of continuous running between two lines 20 m apart. CMJ performance was determined before (pre-test) and immediately after the protocol (post-test). Sagittal plane, video of CMJs was recorded and kinematic data were obtained throughout 2-Dimensional analysis. In addition to the duration of eccentric and concentric phases of CMJ, hip, knee and ankle angles were measured at four key points during CMJ: the lowest position of the squat, take-off, landing, and at the lowest position after landing. Additionally, heart rate was monitored, and rate of perceived exertion was recorded at post-test. Analysis of variance revealed a significant improvement in CMJ (p = 0.002) at post-test. Cluster analysis grouped according to whether PAP was experienced (responders group: RG, n = 25) or not (non-responders group: NRG, n = 8) relative to CMJ change from rest to post-test. RG significantly improved (p < 0.001) the performance in CMJ, whereas NRG remained unchanged. Kinematic data did not show significant differences between RG and NRG. Thus, the data suggest that jumping kinematic does not provide the necessary information to explain PAP phenomenon after intensive running exercises in endurance athletes.

Factor structure and measurement invariance of the Health Education Impact Questionnaire: Does the subjectivity of the response perspective threaten the contextual validity of inferences?

PubMed

Elsworth, Gerald R; Nolte, Sandra; Osborne, Richard H

2015-01-01

On-going evidence is required to support the validity of inferences about change and group differences in the evaluation of health programs, particularly when self-report scales requiring substantial subjectivity in response generation are used as outcome measures. Following this reasoning, the aim of this study was to replicate the factor structure and investigate the measurement invariance of the latest version of the Health Education Impact Questionnaire, a widely used health program evaluation measure. An archived dataset of responses to the most recent version of the English-language Health Education Impact Questionnaire that uses four rather than six response options (N = 3221) was analysed using exploratory structural equation modelling and confirmatory factor analysis appropriate for ordered categorical data. Metric and scalar invariance were studied following recent recommendations in the literature to apply fully invariant unconditional models with minimum constraints necessary for model identification. The original eight-factor structure was replicated and all but one of the scales (Self Monitoring and Insight) was found to consist of unifactorial items with reliability of ⩾0.8 and satisfactory discriminant validity. Configural, metric and scalar invariance were established across pre-test to post-test and population sub-groups (sex, age, education, ethnic background). The results support the high level of interest in the Health Education Impact Questionnaire, particularly for use as a pre-test/post-test measure in experimental studies, other pre-post evaluation designs and system-level monitoring and evaluation.

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: Boeing Helicopters airframe finite element modeling

NASA Technical Reports Server (NTRS)

Gabel, R.; Lang, P.; Reed, D.

1993-01-01

Mathematical models based on the finite element method of structural analysis, as embodied in the NASTRAN computer code, are routinely used by the helicopter industry to calculate airframe static internal loads used for sizing structural members. Historically, less reliance has been placed on the vibration predictions based on these models. Beginning in the early 1980's NASA's Langley Research Center initiated an industry wide program with the objective of engendering the needed trust in vibration predictions using these models and establishing a body of modeling guides which would enable confident future prediction of airframe vibration as part of the regular design process. Emphasis in this paper is placed on the successful modeling of the Army/Boeing CH-47D which showed reasonable correlation with test data. A principal finding indicates that improved dynamic analysis requires greater attention to detail and perhaps a finer mesh, especially the mass distribution, than the usual stress model. Post program modeling efforts show improved correlation placing key modal frequencies in the b/rev range with 4 percent of the test frequencies.

A Simulation Study of Threats to Validity in Quasi-Experimental Designs: Interrelationship between Design, Measurement, and Analysis.

PubMed

Holgado-Tello, Fco P; Chacón-Moscoso, Salvador; Sanduvete-Chaves, Susana; Pérez-Gil, José A

2016-01-01

The Campbellian tradition provides a conceptual framework to assess threats to validity. On the other hand, different models of causal analysis have been developed to control estimation biases in different research designs. However, the link between design features, measurement issues, and concrete impact estimation analyses is weak. In order to provide an empirical solution to this problem, we use Structural Equation Modeling (SEM) as a first approximation to operationalize the analytical implications of threats to validity in quasi-experimental designs. Based on the analogies established between the Classical Test Theory (CTT) and causal analysis, we describe an empirical study based on SEM in which range restriction and statistical power have been simulated in two different models: (1) A multistate model in the control condition (pre-test); and (2) A single-trait-multistate model in the control condition (post-test), adding a new mediator latent exogenous (independent) variable that represents a threat to validity. Results show, empirically, how the differences between both the models could be partially or totally attributed to these threats. Therefore, SEM provides a useful tool to analyze the influence of potential threats to validity.

A Simulation Study of Threats to Validity in Quasi-Experimental Designs: Interrelationship between Design, Measurement, and Analysis

PubMed Central

Holgado-Tello, Fco. P.; Chacón-Moscoso, Salvador; Sanduvete-Chaves, Susana; Pérez-Gil, José A.

2016-01-01

The Campbellian tradition provides a conceptual framework to assess threats to validity. On the other hand, different models of causal analysis have been developed to control estimation biases in different research designs. However, the link between design features, measurement issues, and concrete impact estimation analyses is weak. In order to provide an empirical solution to this problem, we use Structural Equation Modeling (SEM) as a first approximation to operationalize the analytical implications of threats to validity in quasi-experimental designs. Based on the analogies established between the Classical Test Theory (CTT) and causal analysis, we describe an empirical study based on SEM in which range restriction and statistical power have been simulated in two different models: (1) A multistate model in the control condition (pre-test); and (2) A single-trait-multistate model in the control condition (post-test), adding a new mediator latent exogenous (independent) variable that represents a threat to validity. Results show, empirically, how the differences between both the models could be partially or totally attributed to these threats. Therefore, SEM provides a useful tool to analyze the influence of potential threats to validity. PMID:27378991

E-Beam Capture Aid Drawing Based Modelling on Cell Biology

NASA Astrophysics Data System (ADS)

Hidayat, T.; Rahmat, A.; Redjeki, S.; Rahman, T.

2017-09-01

The objectives of this research are to find out how far Drawing-based Modeling assisted with E-Beam Capture could support student’s scientific reasoning skill using Drawing - based Modeling approach assisted with E-Beam Capture. The research design that is used for this research is the Pre-test and Post-test Design. The data collection of scientific reasoning skills is collected by giving multiple choice questions before and after the lesson. The data analysis of scientific reasoning skills is using scientific reasoning assessment rubric. The results show an improvement of student’s scientific reasoning in every indicator; an improvement in generativity which shows 2 students achieving high scores, 3 students in elaboration reasoning, 4 students in justification, 3 students in explanation, 3 students in logic coherency, 2 students in synthesis. The research result in student’s explanation reasoning has the highest number of students with high scores, which shows 20 students with high scores in the pre-test and 23 students in post-test and synthesis reasoning shows the lowest number, which shows 1 student in the pretest and 3 students in posttest. The research result gives the conclusion that Drawing-based Modeling approach assisted with E-Beam Capture could not yet support student’s scientific reasoning skills comprehensively.

A Model to Predict Psychological- and Health-Related Adjustment in Men with Prostate Cancer: The Role of Post Traumatic Growth, Physical Post Traumatic Growth, Resilience and Mindfulness.

PubMed

Walsh, Deirdre M J; Morrison, Todd G; Conway, Ronan J; Rogers, Eamonn; Sullivan, Francis J; Groarke, AnnMarie

2018-01-01

Background: Post traumatic growth (PTG) can be defined as positive change following a traumatic event. The current conceptualization of PTG encompasses five main dimensions, however, there is no dimension which accounts for the distinct effect of a physical trauma on PTG. The purpose of the present research was to test the role of PTG, physical post traumatic growth (PPTG), resilience and mindfulness in predicting psychological and health related adjustment. Method: Ethical approval was obtained from relevant institutional ethics committees. Participants ( N = 241), who were at least 1 year post prostate cancer treatment, were invited to complete a battery of questionnaires either through an online survey or a paper and pencil package received in the post The sample ranged in age from 44 to 88 years ( M = 64.02, SD = 7.76). Data were analysis using confirmatory factor analysis and structural equation modeling. Results: The physical post traumatic growth inventory (P-PTGI) was used to evaluate the role of PPTG in predicting adjustment using structural equation modeling. P-PTGI predicted lower distress and improvement of quality of life, whereas conversely, the traditional PTG measure was linked with poor adjustment. The relationship between resilience and adjustment was found to be mediated by P-PTGI. Conclusion: Findings suggest the central role of PTG in the prostate cancer survivorship experience is enhanced by the inclusion of PPTG. Adjusting to a physical trauma such as illness (internal transgressor) is unlike a trauma with an external transgressor as the physical trauma creates an entirely different framework for adjustment. The current study demonstrates the impact of PPTG on adjustment. This significantly adds to the theory of the development of PTG by highlighting the interplay of resilience with PTG, PPTG, and adjustment.

The diagnostic performance of coronary artery angiography with 64-MSCT and post 64-MSCT: systematic review and meta-analysis.

PubMed

Li, Min; Du, Xiang-Min; Jin, Zhi-Tao; Peng, Zhao-Hui; Ding, Juan; Li, Li

2014-01-01

To comprehensively investigate the diagnostic performance of coronary artery angiography with 64-MDCT and post 64-MDCT. PubMed was searched for all published studies that evaluated coronary arteries with 64-MDCT and post 64-MDCT. The clinical diagnostic role was evaluated by applying the likelihood ratios (LRs) to calculate the post-test probability based on Bayes' theorem. 91 studies that met our inclusion criteria were ultimately included in the analysis. The pooled positive and negative LRs at patient level were 8.91 (95% CI, 7.53, 10.54) and 0.02 (CI, 0.01, 0.03), respectively. For studies that did not claim that non-evaluable segments were included, the pooled positive and negative LRs were 11.16 (CI, 8.90, 14.00) and 0.01 (CI, 0.01, 0.03), respectively. For studies including uninterruptable results, the diagnostic performance decreased, with the pooled positive LR 7.40 (CI, 6.00, 9.13) and negative LR 0.02 (CI, 0.01, 0.03). The areas under the summary ROC curve were 0.98 (CI, 0.97 to 0.99) for 64-MDCT and 0.96 (CI, 0.94 to 0.98) for post 64-MDCT, respectively. For references explicitly stating that the non-assessable segments were included during analysis, a post-test probability of negative results >95% and a positive post-test probability <95% could be obtained for patients with a pre-test probability of <73% for coronary artery disease (CAD). On the other hand, when the pre-test probability of CAD was >73%, the diagnostic role was reversed, with a positive post-test probability of CAD >95% and a negative post-test probability of CAD <95%. The diagnostic performance of post 64-MDCT does not increase as compared with 64-MDCT. CTA, overall, is a test of exclusion for patients with a pre-test probability of CAD<73%, while for patients with a pre-test probability of CAD>73%, CTA is a test used to confirm the presence of CAD.

49 CFR Appendix B to Part 219 - Designation of Laboratory for Post-Accident Toxicological Testing

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Designation of Laboratory for Post-Accident.... 219, App. B Appendix B to Part 219—Designation of Laboratory for Post-Accident Toxicological Testing The following laboratory is currently designated to conduct post-accident toxicological analysis under...

The influence of API concentration on the roller compaction process: modeling and prediction of the post compacted ribbon, granule and tablet properties using multivariate data analysis.

PubMed

Boersen, Nathan; Carvajal, M Teresa; Morris, Kenneth R; Peck, Garnet E; Pinal, Rodolfo

2015-01-01

While previous research has demonstrated roller compaction operating parameters strongly influence the properties of the final product, a greater emphasis might be placed on the raw material attributes of the formulation. There were two main objectives to this study. First, to assess the effects of different process variables on the properties of the obtained ribbons and downstream granules produced from the rolled compacted ribbons. Second, was to establish if models obtained with formulations of one active pharmaceutical ingredient (API) could predict the properties of similar formulations in terms of the excipients used, but with a different API. Tolmetin and acetaminophen, chosen for their different compaction properties, were roller compacted on Fitzpatrick roller compactor using the same formulation. Models created using tolmetin and tested using acetaminophen. The physical properties of the blends, ribbon, granule and tablet were characterized. Multivariate analysis using partial least squares was used to analyze all data. Multivariate models showed that the operating parameters and raw material attributes were essential in the prediction of ribbon porosity and post-milled particle size. The post compacted ribbon and granule attributes also significantly contributed to the prediction of the tablet tensile strength. Models derived using tolmetin could reasonably predict the ribbon porosity of a second API. After further processing, the post-milled ribbon and granules properties, rather than the physical attributes of the formulation were needed to predict downstream tablet properties. An understanding of the percolation threshold of the formulation significantly improved the predictive ability of the models.

Critical Thinking Skills of Students through Mathematics Learning with ASSURE Model Assisted by Software Autograph

NASA Astrophysics Data System (ADS)

Kristianti, Y.; Prabawanto, S.; Suhendra, S.

2017-09-01

This study aims to examine the ability of critical thinking and students who attain learning mathematics with learning model ASSURE assisted Autograph software. The design of this study was experimental group with pre-test and post-test control group. The experimental group obtained a mathematics learning with ASSURE-assisted model Autograph software and the control group acquired the mathematics learning with the conventional model. The data are obtained from the research results through critical thinking skills tests. This research was conducted at junior high school level with research population in one of junior high school student in Subang Regency of Lesson Year 2016/2017 and research sample of class VIII student in one of junior high school in Subang Regency for 2 classes. Analysis of research data is administered quantitatively. Quantitative data analysis was performed on the normalized gain level between the two sample groups using a one-way anova test. The results show that mathematics learning with ASSURE assisted model Autograph software can improve the critical thinking ability of junior high school students. Mathematical learning using ASSURE-assisted model Autograph software is significantly better in improving the critical thinking skills of junior high school students compared with conventional models.

Generation of Graphite Particles by Abrasion and Their Characterization

NASA Astrophysics Data System (ADS)

Troy, Raymond Steven

Self-efficacy beliefs that relate to teachers' motivation and performance have been an important area of concern for preservice teacher education. This study used a mixed-methods approach to investigate the changes in preservice elementary teachers' science self-efficacy beliefs and the factors associated in a specialized elementary physics content course. In addition, the study is one of few to investigate the relationship between the changes in science self-efficacy beliefs and changes in physical science conceptual understanding. Participants included fifty-one preservice elementary teachers enrolled in two term of the physical science content course. Data collection and analysis procedures included both qualitative and quantitative measures. Data collection included implementation of Science Teaching Efficacy Belief Instrument-B (STEBI-B) (Bleicher, 2004) and Physical Science Concept Test as pre- and post-test, two semi-structured interviews with 18 participants (nine each semester), classroom observations and artifacts. A pre-post, repeated measures multivariate analysis of variance (MANOVA) design was used to test the significance of differences between the pre- and post-surveys across time. Results indicated statistically significant gains in participants' science self-efficacy beliefs on both scales of STEBI-B - personal science teaching beliefs and outcome expectancy beliefs. Additionally, a positive moderate relationship between science conceptual understandings and personal science teaching efficacy beliefs was found. Post-hoc analysis of the STEBI-B data was used to select 18 participants for interviews. The participants belonged to each group representing the low, medium and high initial levels of self-efficacy beliefs. Participants' responses indicated positive shifts in their science teacher self-image and confidence to teach science in future. Four categories that represented the course-related factors contributing towards science self-efficacy beliefs included: (1) enhanced science conceptual understandings, (2) active learning experiences, (3) teaching strategies, and (4) instructor as a role-model. Findings suggest that despite of the nature of prior science experiences preservice elementary teachers previously had, an exposure to a course that integrates relevant science content along with modeled instructional strategies can positively impact science self-efficacy beliefs. While some course elements such as active learning experiences and teaching models seemed to impact all groups positively, the low group participants were particularly influenced by the multiple representations of the content and the course instructor as a role model. These findings have important implications for preservice science teacher preparation programs.

Development of preservice elementary teachers' science self- efficacy beliefs and its relation to science conceptual understanding

NASA Astrophysics Data System (ADS)

Menon, Deepika

Self-efficacy beliefs that relate to teachers' motivation and performance have been an important area of concern for preservice teacher education. This study used a mixed-methods approach to investigate the changes in preservice elementary teachers' science self-efficacy beliefs and the factors associated in a specialized elementary physics content course. In addition, the study is one of few to investigate the relationship between the changes in science self-efficacy beliefs and changes in physical science conceptual understanding. Participants included fifty-one preservice elementary teachers enrolled in two term of the physical science content course. Data collection and analysis procedures included both qualitative and quantitative measures. Data collection included implementation of Science Teaching Efficacy Belief Instrument-B (STEBI-B) (Bleicher, 2004) and Physical Science Concept Test as pre- and post-test, two semi-structured interviews with 18 participants (nine each semester), classroom observations and artifacts. A pre-post, repeated measures multivariate analysis of variance (MANOVA) design was used to test the significance of differences between the pre- and post-surveys across time. Results indicated statistically significant gains in participants' science self-efficacy beliefs on both scales of STEBI-B - personal science teaching beliefs and outcome expectancy beliefs. Additionally, a positive moderate relationship between science conceptual understandings and personal science teaching efficacy beliefs was found. Post-hoc analysis of the STEBI-B data was used to select 18 participants for interviews. The participants belonged to each group representing the low, medium and high initial levels of self-efficacy beliefs. Participants' responses indicated positive shifts in their science teacher self-image and confidence to teach science in future. Four categories that represented the course-related factors contributing towards science self-efficacy beliefs included: (1) enhanced science conceptual understandings, (2) active learning experiences, (3) teaching strategies, and (4) instructor as a role-model. Findings suggest that despite of the nature of prior science experiences preservice elementary teachers previously had, an exposure to a course that integrates relevant science content along with modeled instructional strategies can positively impact science self-efficacy beliefs. While some course elements such as active learning experiences and teaching models seemed to impact all groups positively, the low group participants were particularly influenced by the multiple representations of the content and the course instructor as a role model. These findings have important implications for preservice science teacher preparation programs.

The effect of team accelerated instruction on students’ mathematics achievement and learning motivation

NASA Astrophysics Data System (ADS)

Sri Purnami, Agustina; Adi Widodo, Sri; Charitas Indra Prahmana, Rully

2018-01-01

This study aimed to know the improvement of achievement and motivation of learning mathematics by using Team Accelerated Instruction. The research method used was the experiment with descriptive pre-test post-test experiment. The population in this study was all students of class VIII junior high school in Jogjakarta. The sample was taken using cluster random sampling technique. The instrument used in this research was questionnaire and test. Data analysis technique used was Wilcoxon test. It concluded that there was an increase in motivation and student achievement of class VII on linear equation system material by using the learning model of Team Accelerated Instruction. Based on the results of the learning model Team Accelerated Instruction can be used as a variation model in learning mathematics.

Reproduction of post-weaning multi-systemic wasting syndrome in an animal disease model as a tool for vaccine testing under controlled conditions.

PubMed

McKillen, John; McNair, Irene; Lagan, Paula; McKay, Karen; McClintock, Julie; Casement, Veronica; Charreyre, Catherine; Allan, Gordon

2016-04-01

Snatch farrowed, colostrum deprived piglets were inoculated with different combinations of porcine circovirus 2, porcine parvovirus and Erysipelothrix rhusiopathiae candidate vaccines. 10 piglets were mock-vaccinated. Following virus challenge with a combined porcine circovirus 2/porcine parvovirus inoculum, all animals were monitored and samples taken for serology, immunohistochemistry and qPCR. At 24 dpc all non-vaccinated animals remaining were exhibiting signs of post-weaning multi-systemic wasting syndrome which was confirmed by laboratory analysis. Details of the study, analysis of samples and performance of the candidate vaccines are described. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing the factorial structure and measurement invariance of PTSD by gender and ethnic groups in Sri Lanka: An analysis of the modified Harvard Trauma Questionnaire (HTQ).

PubMed

Tay, Alvin Kuowei; Jayasuriya, Rohan; Jayasuriya, Dinuk; Silove, Derrick

2017-04-01

The Harvard Trauma Questionnaire (HTQ) remains the most widely used screening measure for post-traumatic stress disorder (PTSD) in the refugee and post-conflict field. The present study is the first to test the factorial structure and measurement invariance of the HTQ according to DSM-5 criteria across gender and ethnic groups in the ethnically diverse society of post-conflict Sri Lanka. The survey sample included 5136 participants (86% response rate) followed up 12 months after a baseline nationally representative survey undertaken in Sri Lanka in 2014. Exposure to conflict-related traumatic experiences (TEs) generating a trauma count (TC), and symptoms of PTSD were assessed using a modified version of the HTQ adapted to the local context. The final analytic sample included 4260 participants after excluding records with missing data on key variables. We conducted Multigroup Confirmatory Factor Analysis (MG-CFA) to test the four-factor (DSM-5 consistent) and three-factor (DSM-IV-TR) models of PTSD, then assessing measurement invariance of the four factor model by gender and ethnic groups. The three-factor and four-factor DSM-5 model each produced a good fit across the sample as a whole. In addition, there was configural, metric, and scalar invariance for the four-factor model both by gender and ethnicity. The trauma count was directly associated with each of the symptom domains of the four factor model. Our findings provide support for the capacity of the modified HTQ to measure the DSM5 construct of PTSD across gender and key ethnic groupings in Sri Lanka. Confirmation of our findings in other cultures will be important. Copyright © 2017 Elsevier Ltd. All rights reserved.

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post and are available via /nwprod/lib: bacio w3 sp nemsio The following will be used only when Post is set : gmake nmm NMM with post: gmake nmm_post GSM only: gmake gsm GSM with post: gmake gsm_post GSM w

Thermal Analysis in Support of the Booster Separation Motor Crack Investigation

NASA Technical Reports Server (NTRS)

Davis, Darrell; Prickett, Terry; Turner, Larry D. (Technical Monitor)

2001-01-01

During a post-test inspection of a Booster Separation Motor (BSM) from a Lot Acceptance Test (LAT), a crack was noticed in the graphite throat. Since this was an out-of-family occurrence, an investigation team was formed to determine the cause of the crack. This paper will describe thermal analysis techniques used in support of this investigation. Models were generated to predict gradients in nominal motor conditions, as well as potentially anomalous conditions. Analysis was also performed on throats that were tested in the Laser Hardened Material Evaluation Laboratory (LHMEL). Some of these throats were pre-cracked, while others represented configurations designed to amplify effects of thermal stresses. Results from these analyses will be presented in this paper.

Thermal Analysis in Support of the Booster Separation Motor Crack Investigation

NASA Technical Reports Server (NTRS)

Davis, Darrell; Prickett, Terry

2002-01-01

During a post-test inspection of a Booster Separation Motor (BSM) from a Lot Acceptance Test (LAT), a crack was noticed in the graphite throat. Since this was an out-of-family occurrence, an investigation team was formed to determine the cause of the crack. This paper will describe thermal analysis techniques used in support of this investigation. Models were generated to predict gradients in nominal motor conditions, as well as potentially anomalous conditions. Analysis was also performed on throats that were tested in the Laser Hardened Material Evaluation Laboratory (LHMEL). Some of these throats were pre-cracked, while others represented configurations designed to amplify effects of thermal stresses. Results from these analyses will be presented in this paper.

Improving sixth year medical students' performance in knee arthrocentesis using a synthetic knee model.

PubMed

Chiowchanwisawakit, Praveena; Ratanarat, Ranistha; Srinonprasert, Varalak

2015-09-01

A knee arthrocentesis (KA) workshop using synthetic knee model was arranged for all sixth-year medical students (MS) in our institute to ensure equity in receiving training. We evaluated confidence level and knowledge of KA and synovial fluid analysis testing pre- and post-workshop for MS. The workshop was divided into two parts. The first part was to provide knowledge in arthrocentesis and synovial fluid interpretation and the second was a practice session on the synthetic model under supervision. This is a report of pre-and post-workshop self-evaluation about the confidence in performing KA (0-10 scales), improvement of knowledge in KA, and synovial fluid analysis earned from attending the workshop. Pearson χ(2) test or Fisher's exact test was used to compare categorical variables, where appropriate. There were 247 MS attended and 228 (92.3%) evaluated the workshops. Ninety-six (42.1%) MS had experience in KA prior to this workshop. The mean (SD) levels of confidence in performing the procedure before and after the workshop were 3.6 (2.5) and 7.5 (1.7), respectively, P < 0.001. Improvement was shown regardless of previous exposure to KA. Knowledge of appropriate testing for synovial fluid was significantly improved in all items explored after the workshop and extended to the better scores earned from a competency examination. A hands-on structured workshop using a synthetic knee model for KA is a successful model for improving medical students' confidence in performing the procedure with evidence of sustaining knowledge in short-term follow-up. © 2015 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Calculation of flow about posts and powerhead model. [space shuttle main engine

NASA Technical Reports Server (NTRS)

Anderson, P. G.; Farmer, R. C.

1985-01-01

A three dimensional analysis of the non-uniform flow around the liquid oxygen (LOX) posts in the Space Shuttle Main Engine (SSME) powerhead was performed to determine possible factors contributing to the failure of the posts. Also performed was three dimensional numerical fluid flow analysis of the high pressure fuel turbopump (HPFTP) exhaust system, consisting of the turnaround duct (TAD), two-duct hot gas manifold (HGM), and the Version B transfer ducts. The analysis was conducted in the following manner: (1) modeling the flow around a single and small clusters (2 to 10) of posts; (2) modeling the velocity field in the cross plane; and (3) modeling the entire flow region with a three dimensional network type model. Shear stress functions which will permit viscous analysis without requiring excessive numbers of computational grid points were developed. These wall functions, laminar and turbulent, have been compared to standard Blasius solutions and are directly applicable to the cylinder in cross flow class of problems to which the LOX post problem belongs.

20 Meter Solar Sail Analysis and Correlation

NASA Technical Reports Server (NTRS)

Taleghani, B. K.; Lively, P. S.; Banik, J.; Murphy, D. M.; Trautt, T. A.

2005-01-01

This paper describes finite element analyses and correlation studies to predict deformations and vibration modes/frequencies of a 20-meter solar sail system developed by ATK Space Systems. Under the programmatic leadership of NASA Marshall Space Flight Center's In-Space Propulsion activity, the 20-meter solar sail program objectives were to verify the design, to assess structural responses of the sail system, to implement lessons learned from a previous 10-meter quadrant system analysis and test program, and to mature solar sail technology to a technology readiness level (TRL) of 5. For this 20 meter sail system, static and ground vibration tests were conducted in NASA Glenn Research Center's 100 meter diameter vacuum chamber at Plum Brook station. Prior to testing, a preliminary analysis was performed to evaluate test conditions and to determine sensor and actuator locations. After testing was completed, an analysis of each test configuration was performed. Post-test model refinements included updated properties to account for the mass of sensors, wiring, and other components used for testing. This paper describes the development of finite element models (FEM) for sail membranes and masts in each of four quadrants at both the component and system levels, as well as an optimization procedure for the static test/analyses correlation.

"I Don't Know" and Multiple Choice Analysis of Pre- and Post-Tests

ERIC Educational Resources Information Center

Spears, Karen; Wilson, Mary

2010-01-01

Evaluation is an essential component of any Extension education program. One tool, the pre- and post-test, provides measurable evaluation data. Yet often the answer "I don't know" or all possible answers to a multiple choice question are not included in the repeated measure analysis. Because more than two answers are offered, the test of marginal…

Effects of metal- and fiber-reinforced composite root canal posts on flexural properties.

PubMed

Kim, Su-Hyeon; Oh, Tack-Oon; Kim, Ju-Young; Park, Chun-Woong; Baek, Seung-Ho; Park, Eun-Seok

2016-01-01

The aim of this study was to observe the effects of different test conditions on the flexural properties of root canal post. Metal- and fiber-reinforced composite root canal posts of various diameters were measured to determine flexural properties using a threepoint bending test at different conditions. In this study, the span length/post diameter ratio of root canal posts varied from 3.0 to 10.0. Multiple regression models for maximum load as a dependent variable were statistically significant. The models for flexural properties as dependent variables were statistically significant, but linear regression models could not be fitted to data sets. At a low span length/post diameter ratio, the flexural properties were distorted by occurrence of shear stress in short samples. It was impossible to obtain high span length/post diameter ratio with root canal posts. The addition of parameters or coefficients is necessary to appropriately represent the flexural properties of root canal posts.

Time Domain Tool Validation Using ARES I-X Flight Data

NASA Technical Reports Server (NTRS)

Hough, Steven; Compton, James; Hannan, Mike; Brandon, Jay

2011-01-01

The ARES I-X vehicle was launched from NASA's Kennedy Space Center (KSC) on October 28, 2009 at approximately 11:30 EDT. ARES I-X was the first test flight for NASA s ARES I launch vehicle, and it was the first non-Shuttle launch vehicle designed and flown by NASA since Saturn. The ARES I-X had a 4-segment solid rocket booster (SRB) first stage and a dummy upper stage (US) to emulate the properties of the ARES I US. During ARES I-X pre-flight modeling and analysis, six (6) independent time domain simulation tools were developed and cross validated. Each tool represents an independent implementation of a common set of models and parameters in a different simulation framework and architecture. Post flight data and reconstructed models provide the means to validate a subset of the simulations against actual flight data and to assess the accuracy of pre-flight dispersion analysis. Post flight data consists of telemetered Operational Flight Instrumentation (OFI) data primarily focused on flight computer outputs and sensor measurements as well as Best Estimated Trajectory (BET) data that estimates vehicle state information from all available measurement sources. While pre-flight models were found to provide a reasonable prediction of the vehicle flight, reconstructed models were generated to better represent and simulate the ARES I-X flight. Post flight reconstructed models include: SRB propulsion model, thrust vector bias models, mass properties, base aerodynamics, and Meteorological Estimated Trajectory (wind and atmospheric data). The result of the effort is a set of independently developed, high fidelity, time-domain simulation tools that have been cross validated and validated against flight data. This paper presents the process and results of high fidelity aerospace modeling, simulation, analysis and tool validation in the time domain.

A post audit of a model-designed ground water extraction system.

PubMed

Andersen, Peter F; Lu, Silong

2003-01-01

Model post audits test the predictive capabilities of ground water models and shed light on their practical limitations. In the work presented here, ground water model predictions were used to design an extraction/treatment/injection system at a military ammunition facility and then were re-evaluated using site-specific water-level data collected approximately one year after system startup. The water-level data indicated that performance specifications for the design, i.e., containment, had been achieved over the required area, but that predicted water-level changes were greater than observed, particularly in the deeper zones of the aquifer. Probable model error was investigated by determining the changes that were required to obtain an improved match to observed water-level changes. This analysis suggests that the originally estimated hydraulic properties were in error by a factor of two to five. These errors may have resulted from attributing less importance to data from deeper zones of the aquifer and from applying pumping test results to a volume of material that was larger than the volume affected by the pumping test. To determine the importance of these errors to the predictions of interest, the models were used to simulate the capture zones resulting from the originally estimated and updated parameter values. The study suggests that, despite the model error, the ground water model contributed positively to the design of the remediation system.

Vented Versus Unvented Chest Seals for Treatment of Pneumothorax and Prevention of Tension Pneumothorax in a Swine Model

DTIC Science & Technology

2013-07-01

person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control ...were obtained. Data Analysis Data are expressed as mean T SEM. Between- group anal- ysis (Halo vs. Bolin) was performed using two-way repeated...measures analysis of variance. Bonferroni post test was used to compare replicate means at each PTx level. Within- group (treat- ment) analysis was performed

Effect of load eccentricity on the buckling of thin-walled laminated C-columns

NASA Astrophysics Data System (ADS)

Wysmulski, Pawel; Teter, Andrzej; Debski, Hubert

2018-01-01

The study investigates the behaviour of short, thin-walled laminated C-columns under eccentric compression. The tested columns are simple-supported. The effect of load inaccuracy on the critical and post-critical (local buckling) states is examined. A numerical analysis by the finite element method and experimental tests on a test stand are performed. The samples were produced from a carbon-epoxy prepreg by the autoclave technique. The experimental tests rest on the assumption that compressive loads are 1.5 higher than the theoretical critical force. Numerical modelling is performed using the commercial software package ABAQUS®. The critical load is determined by solving an eigen problem using the Subspace algorithm. The experimental critical loads are determined based on post-buckling paths. The numerical and experimental results show high agreement, thus demonstrating a significant effect of load inaccuracy on the critical load corresponding to the column's local buckling.

Experimental and numerical study of control of flow separation of a symmetric airfoil with trapped vortex cavity

NASA Astrophysics Data System (ADS)

Shahid, Abdullah Bin; Mashud, Mohammad

2017-06-01

This paper summarizes the experimental campaign and numerical analysis performed aimed to analyze the potential benefit available employing a trapping vortex cell system on a high thickness symmetric aero-foil without steady suction or injection mass flow. In this work, the behavior of a two dimensional model equipped with a span wise adjusted circular cavity has been researched. Pressure distribution on the model surface and inside and the complete flow field round the model have been measured. Experimental tests have been performed varying the wind tunnel speed and also the angle of attack. For numerical analysis the two dimensional model of the airfoil and the mesh is formed through ANSYS Meshing that is run in Fluent for numerical iterate solution. In the paper the performed test campaign, the airfoil design, the adopted experimental set-up, the numerical analysis, the data post process and the results description are reported, compared a discussed.

78 FR 3407 - Proposed Information Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... technical assistance programs by administering pre- and post-test instruments to participants. CNCS will.... Frequency: Annually. Average Time Per Response: Five minutes for the pre-test and 5 minutes for the post... analysis of client satisfaction feedback with aggregations of post training-participant evaluations...

Shock Layer Radiation Measurements and Analysis for Mars Entry

NASA Technical Reports Server (NTRS)

Bose, Deepak; Grinstead, Jay Henderson; Bogdanoff, David W.; Wright, Michael J.

2009-01-01

NASA's In-Space Propulsion program is supporting the development of shock radiation transport models for aerocapture missions to Mars. A comprehensive test series in the NASA Antes Electric Arc Shock Tube facility at a representative flight condition was recently completed. The facility optical instrumentation enabled spectral measurements of shocked gas radiation from the vacuum ultraviolet to the near infrared. The instrumentation captured the nonequilibrium post-shock excitation and relaxation dynamics of dispersed spectral features. A description of the shock tube facility, optical instrumentation, and examples of the test data are presented. Comparisons of measured spectra with model predictions are also made.

Post irradiation analysis of RERTR-7A, 7B and RERTR-8 tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hofman, G.L.; Kim, Yeon Soo; Shevlyakov, G.V.

2008-07-15

Addition of 2 wt% or more of silicon in the Al matrix for U-Mo/Al dispersion fuel has proved to be effective in reducing interaction layer growth from the RERTR-7A test to a burnup of {approx}100 at% U-235 (LEU equivalent). The recent RERTR-8 test also showed the consistent results. In this paper, we present the post irradiation analysis results of these tests. A considerable number of monolithic fuel plates were irradiated in the RERTR-7A and RERTR-8 tests. The post irradiation results of these plates are also included. The RERTR-7B test was a lower burnup test with similar power to the RERTR-7A.more » In this test, dispersion fuel plates with U-7Mo-1Ti and U- 7Mo-2Zr in Al-5Si were irradiated. The post irradiation results of these plates are also covered. (author)« less

A novel approach to induction and rehabilitation of deficits in forelimb function in a rat model of ischemic stroke.

PubMed

Livingston-Thomas, Jessica Mary; Hume, Andrew Wilson; Doucette, Tracy Ann; Tasker, Richard Andrew

2013-01-01

Constraint-induced movement therapy (CIMT), which forces use of the impaired arm following unilateral stroke, promotes functional recovery in the clinic but animal models of CIMT have yielded mixed results. The aim of this study is to develop a refined endothelin-1 (ET-1) model of focal ischemic injury in rats that resulted in reproducible, well-defined lesions and reliable upper extremity impairments, and to determine if an appetitively motivated form of rehabilitation (voluntary forced use movement therapy; FUMT) would accelerate post-ischemic motor recovery. Male Sprague Dawley rats (3 months old) were given multiple intracerebral microinjections of ET-1 into the sensorimotor cortex and dorsolateral striatum. Sham-operated rats received the same surgical procedure up to but not including the drill holes on the skull. Functional deficits were assessed using two tests of forelimb placing, a forelimb postural reflex test, a forelimb asymmetry test, and a horizontal ladder test. In a separate experiment ET-1 stroke rats were subjected to daily rehabilitation with FUMT or with a control therapy beginning on post-surgery d 5. Performance and post-mortem analysis of lesion volume and regional BDNF expression were measured. Following microinjections of ET-1 animals exhibited significant deficits in contralateral forelimb function on a variety of tests compared with the sham group. These deficits persisted for up to 20 d with no mortality and were associated with consistent lesion volumes. FUMT therapy resulted in a modest but significantly accelerated recovery in the forelimb function as compared with the control therapy, but did not affect lesion size or BDNF expression in the ipsilesional hemisphere. We conclude that refined ET-1 microinjection protocols and forcing use of the impaired forelimb in an appetitively motivated paradigm may prove useful in developing strategies to study post-ischemic rehabilitation and neuroplasticity.

Post-test evaluation of the geology, geochemistry, microbiology, and hydrology of the in situ air stripping demonstration site at the Savannah River Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eddy Dilek, C.A.; Looney, B.B.; Hazen, T.C.

A full-scale demonstration of the use of horizontal wells for in situ air stripping for environment restoration was completed as part of the Savannah River Integrated Demonstration Program. The demonstration of in situ air stripping was the first in a series of demonstrations of innovative remediation technologies for the cleanup of sites contaminated with volatile organic contaminants. The in situ air stripping system consisted of two directionally drilled wells that delivered gases to and extract contamination from the subsurface. The demonstration was designed to remediate soils and sediments in the unsaturated and saturated zones as well as groundwater contaminated withmore » volatile organic compounds. The demonstration successfully removed significant quantities of solvent from the subsurface. The field site and horizontal wells were subsequently used for an in situ bioremediation demonstration during which methane was added to the injected air. The field conditions documented herein represent the baseline status of the site for evaluating the in situ bioremediation as well as the post-test conditions for the in situ air stripping demonstration. Characterization activities focused on documenting the nature and distribution of contamination in the subsurface. The post-test characterization activities discussed herein include results from the analysis of sediment samples, three-dimensional images of the pretest and post-test data, contaminant inventories estimated from pretest and post-test models, a detailed lithologic cross sections of the site, results of aquifer testing, and measurements of geotechnical parameters of undisturbed core sediments.« less

Developing the Pieta House Suicide Intervention Model: a quasi-experimental, repeated measures design.

PubMed

Surgenor, Paul Wg; Freeman, Joan; O'Connor, Cindy

2015-01-01

While most crisis intervention models adhere to a generalised theoretical framework, the lack of clarity around how these should be enacted has resulted in a proliferation of models, most of which have little to no empirical support. The primary aim of this research was to propose a suicide intervention model that would resolve the client's suicidal crisis by decreasing their suicidal ideation and improve their outlook through enhancing a range of protective factors. The secondary aim was to assess the impact of this model on negative and positive outlook. A quasi-experimental, pre-test post-test repeated measures design was employed. A questionnaire assessing self-esteem, depression, and positive and negative suicidal ideation was administered to the same participants pre- and post- therapy facilitating paired responses. Multiple analysis of variance and paired-samples t-tests were conducted to establish whether therapy using the PH-SIM had a significant effect on the clients' negative and positive outlook. Analyses revealed a statistically significant effect of therapy for depression, negative suicidal ideation, self-esteem, and positive suicidal ideation. Negative outlook was significantly lower after therapy and positive outlook significantly higher. The decreased negative outlook and increased positive outlook following therapy provide some support for the proposed model in fulfilling its role, though additional research is required to establish the precise role of the intervention model in achieving this.

The role of objective cognitive dysfunction in subjective cognitive complaints after stroke.

PubMed

van Rijsbergen, M W A; Mark, R E; Kop, W J; de Kort, P L M; Sitskoorn, M M

2017-03-01

Objective cognitive performance (OCP) is often impaired in patients post-stroke but the consequences of OCP for patient-reported subjective cognitive complaints (SCC) are poorly understood. We performed a detailed analysis on the association between post-stroke OCP and SCC. Assessments of OCP and SCC were obtained in 208 patients 3 months after stroke. OCP was evaluated using conventional and ecologically valid neuropsychological tests. Levels of SCC were measured using the CheckList for Cognitive and Emotional (CLCE) consequences following stroke inventory. Multivariate hierarchical regression analyses were used to evaluate the association of OCP with CLCE scores adjusting for age, sex and intelligence quotient. Analyses were performed to examine the global extent of OCP dysfunction (based on the total number of impaired neuropsychological tests, i.e. objective cognitive impairment index) and for each OCP test separately using the raw neuropsychological (sub)test scores. The objective cognitive impairment index for global OCP was positively correlated with the CLCE score (Spearman's rho = 0.22, P = 0.003), which remained significant in multivariate adjusted models (β = 0.25, P = 0.01). Results for the separate neuropsychological tests indicated that only one task (the ecologically valid Rivermead Behavioural Memory Test) was independently associated with the CLCE in multivariate adjusted models (β = -0.34, P < 0.001). Objective neuropsychological test performance, as measured by the global dysfunction index or an ecologically valid memory task, was associated with SCC. These data suggest that cumulative deficits in multiple cognitive domains contribute to subjectively experienced poor cognitive abilities in daily life in patients post-stroke. © 2016 EAN.

Rigidizable Inflatable Get-Away-Special Experiment (RIGEX) Post Flight Analysis, Ground Testing, Modeling, and Future Applications

DTIC Science & Technology

2009-03-01

applications. RIGEX was an Air Force Institute of Technology graduate-student-built Space Shuttle cargo bay experiment intended to heat and inflate...suggestions for future experiments and applications are provided. RIGEX successfully accomplished its mission statement by validating the heating and...Inflatable/Rigidizable Solar Arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.6. RIGEX Student Involvement

The Propagation of Errors in Experimental Data Analysis: A Comparison of Pre-and Post-Test Designs

ERIC Educational Resources Information Center

Gorard, Stephen

2013-01-01

Experimental designs involving the randomization of cases to treatment and control groups are powerful and under-used in many areas of social science and social policy. This paper reminds readers of the pre-and post-test, and the post-test only, designs, before explaining briefly how measurement errors propagate according to error theory. The…

System-Integrated Finite Element Analysis of a Full-Scale Helicopter Crash Test with Deployable Energy Absorbers

NASA Technical Reports Server (NTRS)

Annett, Martin S.; Polanco, Michael A.

2010-01-01

A full-scale crash test of an MD-500 helicopter was conducted in December 2009 at NASA Langley's Landing and Impact Research facility (LandIR). The MD-500 helicopter was fitted with a composite honeycomb Deployable Energy Absorber (DEA) and tested under vertical and horizontal impact velocities of 26-ft/sec and 40-ft/sec, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of a system integrated finite element model. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests was conducted to evaluate the impact performances of various components, including a new crush tube and the DEA blocks. Parameters defined within the system integrated finite element model were determined from these tests. The objective of this paper is to summarize the finite element models developed and analyses performed, beginning with pre-test predictions and continuing through post-test validation.

LS-DYNA Analysis of a Full-Scale Helicopter Crash Test

NASA Technical Reports Server (NTRS)

Annett, Martin S.

2010-01-01

A full-scale crash test of an MD-500 helicopter was conducted in December 2009 at NASA Langley's Landing and Impact Research facility (LandIR). The MD-500 helicopter was fitted with a composite honeycomb Deployable Energy Absorber (DEA) and tested under vertical and horizontal impact velocities of 26 ft/sec and 40 ft/sec, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of a system integrated LS-DYNA finite element model. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests was conducted to evaluate the impact performances of various components, including a new crush tube and the DEA blocks. Parameters defined within the system integrated finite element model were determined from these tests. The objective of this paper is to summarize the finite element models developed and analyses performed, beginning with pre-test and continuing through post test validation.

Quality of life for post-polio syndrome: a patient derived, Rasch standard scale.

PubMed

Young, Carolyn A; Quincey, Anne-Marie C; Wong, Samantha M; Tennant, Alan

2018-03-01

To design a disease-specific quality of life (QoL) questionnaire for people with post-polio syndrome (PPS). Qualitative interviews were conducted with 45 people with PPS to identify themes and derive potential items reflecting impact upon QoL. After cognitive debriefing, these were made into a questionnaire pack along with comparative questionnaires and posted to 319 patients. The 271 (85%) returned questionnaires were subjected to exploratory factor analysis (EFA) and Rasch analysis. A 25 item scale, the post-polio quality of life scale (PP-QoL), showed good fit to the Rasch model (conditional chi-square p = 0.156), unidimensionality (% t-tests 2.0: CI 0.7-3.8), and Cronbach's alpha of 0.87. With the latent estimate transformed to a 0-100 scale, the mean score was 56.9 (SD 18.5) with only 3.3% of respondents at the floor or ceiling of the scale. Test-retest reliability showed an intraclass correlation coefficient (ICC) (2.1) of 0.916, and correlation of 0.85. The disease-specific PP-QoL demonstrated excellent reliability, appropriate concurrent validity, and satisfied the standards of the Rasch model. It enables examination of the impact of health status upon perceived QoL, and the impact of rehabilitation interventions. The scale is freely available for academic or not-for-profit users to improve research in this neglected, disabling condition. Implications for Rehabilitation In post-polio syndrome (PPS), existing work examines aspects of health-related quality of life (HRQoL), such as activity limitations. A disease-specific QoL measure would enable researchers to model the impact of health status, such as fatigue or mobility restrictions, upon QoL in PPS. The post-polio quality of life scale (PP-QoL) is based on the patients' lived experience, meets Rasch standards and is free for use for academic and not-for-profit researchers. The raw score is reliable for individual use in clinical settings, and interval scale transformation is available for parametric applications and the calculation of change scores.

Forward Skirt Structural Testing on the Space Launch System (SLS) Program

NASA Technical Reports Server (NTRS)

Lohrer, J. D.; Wright, R. D.

2016-01-01

Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the Space Launch System (SLS) program. One forward skirt is located in each solid rocket booster. Heritage forward skirts are aluminum 2219 welded structures. Loads are applied at the forward skirt thrust post and ball assembly. Testing was needed because SLS ascent loads are roughly 40% higher than Space Shuttle loads. Testing objectives were to determine margins of safety, demonstrate reliability, and validate analytical models. Two forward skirts were structurally tested using the test configuration. The test stand applied loads to the thrust post. Four hydraulic actuators were used to apply axial load and two hydraulic actuators were used to apply radial and tangential loads. The first test was referred to as FSTA-1 (Forward Skirt Structural Test Article) and was performed in April/May 2014. The purpose of FSTA-1 was to verify the ultimate capability of the forward skirt subjected to ascent ultimate loads. Testing consisted of two liftoff load cases taken to 100% limit load followed by an ascent load case taken to 110% limit load. The forward skirt was unloaded to no load after each test case. Lastly, the forward skirt was tested to 140% limit and then to failure using the ascent loads. The second test was referred to as FSTA-2 and performed in July/August of 2014. The purpose of FSTA-2 was to verify the ultimate capability of the forward skirt subjected to liftoff ultimate loads. Testing consisted of six liftoff load cases taken to 100% limit load followed by the six liftoff cases taken to 140% limit load. Two ascent load cases were then tested to 100% limit load. The forward skirt was unloaded to no load after each test case. Lastly, the forward skirt was tested to 140% limit and then to failure using the ascent loads. The forward skirts on FSTA-1 and FSTA-2 successfully carried all applied liftoff and ascent load cases. Both FSTA-1 and FSTA-2 were tested to failure by increasing the ascent loads. Failure occurred in the forward skirt thrust post radius. The forward skirts on FSTA-1 and FSTA-2 had nearly identical failure modes. FSTA-1 failed at 1.72 times limit load and FSTA-2 failed at 1.62 times limit load. This difference is primarily attributed to variation in material properties in the thrust post region. Test data were obtained from strain gages, deflection gages, ARAMIS digital strain measurement, acoustic emissions, and high-speed video. Strain gage data and ARAMIS strain were compared to finite element (FE) analysis predictions. Both the forward skirt and tooling were modeled. This allows the analysis to simulate the loading as close as possible to actual test configuration. FSTA-1 and FSTA-2 were instrumented with over 200 strain gages to ensure all possible failure modes could be captured. However, it turned out that three gages provided critical strain data. One was located in the post bore and two on the post radius. More gages were not specified due to space limitations and the desire to not interfere with the use of the ARAMIS system on the post radius. Measured strains were compared to analysis results for the load cycle to failure. Note that FSTA-1 gages were lost before failure was reached. FSTA-2 gages made it to the failure load but one of the radius gages was lost before testing began. This gage was not replaced because of the time and cost associated with disassembly of the test structure. Correlation to analysis was excellent for FSTA-1. FSTA-2 was not quite as good because there was more residual strain from previous load cycles. FSTA-2 was loaded and unloaded with 12 liftoff cases and two ascent cases before taking the skirt to failure. FSTA-1 only had two liftoff cases and one ascent case before taking the skirt to failure. The ARAMIS system was used to determine strain at the post radius by processing digital images of a speckled paint pattern. Digital cameras recorded images of the speckled paint pattern. ARAMIS strain results for FSTA-2 just prior to failure. Note a high strain location develops near the left side. This high strain compares well to analysis prediction for both FSTA-1 and FSTA-2. The strain at this location was also plotted versus limit load. Both FSTA-1 and FSTA-2 had excellent correlation between ARAMIS and analysis strains. Acoustic emission (AE) sensors were used to monitor for damage formation that may occur during testing (e.g., crack formation and growth or propagation). AE was very important because after disassembly of FSTA-1, a crack was observed in the ball fitting radius. The ball fitting did not crack on FSTA-2. AE data was used to reconstruct when the crack occurred. The AE energy versus time plot for FSTA. The energy increased considerably at 850 seconds (152% limit load), indicating a crack could have formed at this point. The only visual evidence found that could have corresponded to this was the crack that initiated in the ball fitting. The cracks in the forward skirt aluminum structures would likely have been lower energy due to a lower modulus and all that were found after failure correlated to occurring after the initial crack in the post radius. This was verified by high-speed cameras used to record the failure.

Effects of music therapy on anxiety of patients with breast cancer after radical mastectomy: a randomized clinical trial.

PubMed

Li, Xiao-Mei; Zhou, Kai-Na; Yan, Hong; Wang, Duo-Lao; Zhang, Yin-Ping

2012-05-01

  This paper is a report of a clinical trial of the effects of music therapy on anxiety of female breast cancer patients following radical mastectomy.   There is insufficient evidence on the effects of music therapy on state anxiety of breast cancer patients following radical mastectomy.   A Hall's Core, Care, and Cure Model-based clinical trial was conducted in 120 female breast cancer patients from March to November 2009. A randomized controlled design was utilized. The patients were randomly allocated to the experimental group (n = 60) received music therapy in addition to routine nursing care, and the control group (n = 60) only received routine nursing care. A standardized questionnaire and the State Anxiety Inventory were applied. The primary endpoint was the state anxiety score measured at pretest (on the day before radical mastectomy) and at three post-tests (on the day before patients were discharged from hospital, the second and third time of admission to hospital for chemotherapy respectively).   The pretest score revealed that the majority of the patients had a moderate level (77·5%) and 15% had severe level of state anxiety. The repeated-measure ancova model analysis indicated that the mean state anxiety score was significantly lower in the experimental group than those in the control group at each of the three post-test measurements. The mean difference between the experimental and control group together with 95% confidence intervals were -4·57 (-6·33, -2·82), -8·91 (-10·75, -7·08) and -9·69 (-11·52, -7·85) at the 1st post-test, 2nd post-test and 3rd post-test respectively.   Music therapy is found to have positive effects on decreasing state anxiety score. © 2011 The Authors. Journal of Advanced Nursing © 2011 Blackwell Publishing Ltd.

U.S. Navy Officer Attitudes on the Repeal of Don’t Ask, Don’t Tell

DTIC Science & Technology

2013-03-01

military units; a pre- test / post - test quasi experiment; survey analysis; relevant media analysis of articles related to the repeal and published within...and 2010. The surveys revealed an increasing acceptance of gays in the Navy. The present study, conducted post - repeal, utilized the same NPS survey...and enlisted personnel. Further, the post -repeal effects on readiness should be monitored, particularly for fairness and potential harassment. The

The implementation of assessment model based on character building to improve students’ discipline and achievement

NASA Astrophysics Data System (ADS)

Rusijono; Khotimah, K.

2018-01-01

The purpose of this research was to investigate the effect of implementing the assessment model based on character building to improve discipline and student’s achievement. Assessment model based on character building includes three components, which are the behaviour of students, the efforts, and student’s achievement. This assessment model based on the character building is implemented in science philosophy and educational assessment courses, in Graduate Program of Educational Technology Department, Educational Faculty, Universitas Negeri Surabaya. This research used control group pre-test and post-test design. Data collection method used in this research were observation and test. The observation was used to collect the data about the disciplines of the student in the instructional process, while the test was used to collect the data about student’s achievement. Moreover, the study applied t-test to the analysis of data. The result of this research showed that assessment model based on character building improved discipline and student’s achievement.

The design and testing of a caring teaching model based on the theoretical framework of caring in the Chinese Context: a mixed-method study.

PubMed

Guo, Yujie; Shen, Jie; Ye, Xuchun; Chen, Huali; Jiang, Anli

2013-08-01

This paper aims to report the design and test the effectiveness of an innovative caring teaching model based on the theoretical framework of caring in the Chinese context. Since the 1970's, caring has been a core value in nursing education. In a previous study, a theoretical framework of caring in the Chinese context is explored employing a grounded theory study, considered beneficial for caring education. A caring teaching model was designed theoretically and a one group pre- and post-test quasi-experimental study was administered to test its effectiveness. From Oct, 2009 to Jul, 2010, a cohort of grade-2 undergraduate nursing students (n=64) in a Chinese medical school was recruited to participate in the study. Data were gathered through quantitative and qualitative methods to evaluate the effectiveness of the caring teaching model. The caring teaching model created an esthetic situation and experiential learning style for teaching caring that was integrated within the curricula. Quantitative data from the quasi-experimental study showed that the post-test scores of each item were higher than those on the pre-test (p<0.01). Thematic analysis of 1220 narratives from students' caring journals and reports of participant class observation revealed two main thematic categories, which reflected, from the students' points of view, the development of student caring character and the impact that the caring teaching model had on this regard. The model could be used as an integrated approach to teach caring in nursing curricula. It would also be beneficial for nursing administrators in cultivating caring nurse practitioners. Copyright © 2012 Elsevier Ltd. All rights reserved.

Improvements to constitutive material model for fabrics

NASA Astrophysics Data System (ADS)

Morea, Mihai I.

2011-12-01

The high strength to weight ratio of woven fabric offers a cost effective solution to be used in a containment system for aircraft propulsion engines. Currently, Kevlar is the only Federal Aviation Administration (FAA) approved fabric for usage in systems intended to mitigate fan blade-out events. This research builds on an earlier constitutive model of Kevlar 49 fabric developed at Arizona State University (ASU) with the addition of new and improved modeling details. Latest stress strain experiments provided new and valuable data used to modify the material model post peak behavior. These changes reveal an overall improvement of the Finite Element (FE) model's ability to predict experimental results. First, the steel projectile is modeled using Johnson-Cook material model and provides a more realistic behavior in the FE ballistic models. This is particularly noticeable when comparing FE models with laboratory tests where large deformations in projectiles are observed. Second, follow-up analysis of the results obtained through the new picture frame tests conducted at ASU provides new values for the shear moduli and corresponding strains. The new approach for analysis of data from picture frame tests combines digital image analysis and a two-level factorial optimization formulation. Finally, an additional improvement in the material model for Kevlar involves checking the convergence at variation of mesh density of fabrics. The study performed and described herein shows the converging trend, therefore validating the FE model.

Test and Analysis of Solid Rocket Motor Nozzle Ablative Materials

NASA Technical Reports Server (NTRS)

Clayton, J. Louie

2017-01-01

Asbestos free solid motor internal insulation samples were tested at the MSFC Hyperthermal Facility. Objectives of the test were to gather data for analog characterization of ablative and in-depth thermal performance of rubber materials subject to high enthalpy/pressure flow conditions. Tests were conducted over a range of convective heat fluxes for both inert and chemically reactive sub-sonic free stream gas flow. Instrumentation included use of total calorimeters, thermocouples, and a surface pyrometer for surface temperature measurement. Post-test sample forensics involved measurement of eroded depth, charred depth, total sample weight loss, and documentation of the general condition of the eroded profile. A complete Charring Material Ablator (CMA) style aero-thermal analysis was conducted for the test matrix and results compared to the measured data. In general, comparisons were possible for a number of the cases and the results show a limited predictive ability to model accurately both the ablative response and the in-depth temperature profiles. Lessons learned and modeling recommendations are made regarding future testing and modeling improvements that will increase understanding of the basic chemistry/physics associated with the complicated material ablation process of rubber materials.

Results of investigation IA110 on a 0.015-scale integrated configuration of the space shuttle vehicle in the arc 9 x 7 supersonic wind tunnel using models 67-TS and 49-0

NASA Technical Reports Server (NTRS)

Chee, E.

1975-01-01

An 0.015-scale space shuttle vehicle model was tested to investigate Orbiter wind bending, elevon panel loads, and elevon effectiveness. Mach numbers from 1.5 through 2.5 were investigated. Angles of attack and sideslip were varied from -8 degrees through +8 degrees. Post test analysis of raw wind tunnel data indicated a zero shift had occured in the wing bending and torsional gages during the test. The mechanism by which this shift occurred was not determined. Therefore, all the wind root bending and torsional moment data is suspect.

Mesoscale Characterization of Fracture Properties of Steel Fiber-Reinforced Concrete Using a Lattice-Particle Model.

PubMed

Montero-Chacón, Francisco; Cifuentes, Héctor; Medina, Fernando

2017-02-21

This work presents a lattice-particle model for the analysis of steel fiber-reinforced concrete (SFRC). In this approach, fibers are explicitly modeled and connected to the concrete matrix lattice via interface elements. The interface behavior was calibrated by means of pullout tests and a range for the bond properties is proposed. The model was validated with analytical and experimental results under uniaxial tension and compression, demonstrating the ability of the model to correctly describe the effect of fiber volume fraction and distribution on fracture properties of SFRC. The lattice-particle model was integrated into a hierarchical homogenization-based scheme in which macroscopic material parameters are obtained from mesoscale simulations. Moreover, a representative volume element (RVE) analysis was carried out and the results shows that such an RVE does exist in the post-peak regime and until localization takes place. Finally, the multiscale upscaling strategy was successfully validated with three-point bending tests.

Mesoscale Characterization of Fracture Properties of Steel Fiber-Reinforced Concrete Using a Lattice–Particle Model

PubMed Central

Montero-Chacón, Francisco; Cifuentes, Héctor; Medina, Fernando

2017-01-01

This work presents a lattice–particle model for the analysis of steel fiber-reinforced concrete (SFRC). In this approach, fibers are explicitly modeled and connected to the concrete matrix lattice via interface elements. The interface behavior was calibrated by means of pullout tests and a range for the bond properties is proposed. The model was validated with analytical and experimental results under uniaxial tension and compression, demonstrating the ability of the model to correctly describe the effect of fiber volume fraction and distribution on fracture properties of SFRC. The lattice–particle model was integrated into a hierarchical homogenization-based scheme in which macroscopic material parameters are obtained from mesoscale simulations. Moreover, a representative volume element (RVE) analysis was carried out and the results shows that such an RVE does exist in the post-peak regime and until localization takes place. Finally, the multiscale upscaling strategy was successfully validated with three-point bending tests. PMID:28772568

Power flows and Mechanical Intensities in structural finite element analysis

NASA Technical Reports Server (NTRS)

Hambric, Stephen A.

1989-01-01

The identification of power flow paths in dynamically loaded structures is an important, but currently unavailable, capability for the finite element analyst. For this reason, methods for calculating power flows and mechanical intensities in finite element models are developed here. Formulations for calculating input and output powers, power flows, mechanical intensities, and power dissipations for beam, plate, and solid element types are derived. NASTRAN is used to calculate the required velocity, force, and stress results of an analysis, which a post-processor then uses to calculate power flow quantities. The SDRC I-deas Supertab module is used to view the final results. Test models include a simple truss and a beam-stiffened cantilever plate. Both test cases showed reasonable power flow fields over low to medium frequencies, with accurate power balances. Future work will include testing with more complex models, developing an interactive graphics program to view easily and efficiently the analysis results, applying shape optimization methods to the problem with power flow variables as design constraints, and adding the power flow capability to NASTRAN.

Evaluating the efficacy of a chemistry video game

NASA Astrophysics Data System (ADS)

Shapiro, Marina

A quasi-experimental design pre-test/post-test intervention study utilizing a within group analysis was conducted with 45 undergraduate college chemistry students that investigated the effect of implementing a game-based learning environment into an undergraduate college chemistry course in order to learn if serious educational games (SEGs) can be used to achieve knowledge gains of complex chemistry concepts and to achieve increase in students' positive attitude toward chemistry. To evaluate if students learn chemistry concepts by participating in a chemistry game-based learning environment, a one-way repeated measures analysis of variance (ANOVA) was conducted across three time points (pre-test, post-test, delayed post-test which were chemistry content exams). Results showed that there was an increase in exam scores over time. The results of the ANOVA indicated a statistically significant time effect. To evaluate if students' attitude towards chemistry increased as a result of participating in a chemistry game-based learning environment a paired samples t-test was conducted using a chemistry attitudinal survey by Mahdi (2014) as the pre- and post-test. Results of the paired-samples t-test indicated that there was no significant difference in pre-attitudinal scores and post-attitudinal scores.

Intra-Articular Therapeutic Delivery for Post-Traumatic Osteoarthritis

DTIC Science & Technology

2017-10-01

takes about 10 years to develop. The goals of this work are to test the ability of a novel therapeutic to slow the progression of post -traumatic...frequency of delivery in well- established small and large animal models of post -traumatic OA. These hypotheses will be tested via three Specific Aims...group) to conduct further contrast agent pilot testing on non-healthy joints. Animals were euthanized at 3 weeks post -MMT surgery, and all limbs fixed

The Parachute System Recovery of the Orion Pad Abort Test 1

NASA Technical Reports Server (NTRS)

Machin, Ricardo; Evans, Carol; Madsen, Chris; Morris, Aaron

2011-01-01

The Orion Pad Abort Test 1 was conducted at the US Army White Sands Missile range in May 2010. The capsule was successfully recovered using the original design for the parachute recovery system, referred to as the CEV Parachute Assembly System (CPAS). The CPAS was designed to a set of requirements identified prior to the development of the PA-1 test; these requirements were not entirely consistent with the design of the PA-1 test. This presentation will describe the original CPAS design, how the system was modified to accommodate the PA-1 requirements, and what special analysis had to be performed to demonstrate positive margins for the CPAS. The presentation will also discuss the post test analysis and how it compares to the models that were used to design the system.

Nursing intensive care skills training: a nurse led, short, structured, and practical training program, developed and tested in a resource-limited setting.

PubMed

De Silva, A Pubudu; Stephens, Tim; Welch, John; Sigera, Chathurani; De Alwis, Sunil; Athapattu, Priyantha; Dharmagunawardene, Dilantha; Olupeliyawa, Asela; de Abrew, Ashwini; Peiris, Lalitha; Siriwardana, Somalatha; Karunathilake, Indika; Dondorp, Arjen; Haniffa, Rashan

2015-04-01

To assess the impact of a nurse-led, short, structured training program for intensive care unit (ICU) nurses in a resource-limited setting. A training program using a structured approach to patient assessment and management for ICU nurses was designed and delivered by local nurse tutors in partnership with overseas nurse trainers. The impact of the course was assessed using the following: pre-course and post-course self-assessment, a pre-course and post-course Multiple Choice Questionnaire (MCQ), a post-course Objective Structured Clinical Assessment station, 2 post-course Short Oral Exam (SOE) stations, and post-course feedback questionnaires. In total, 117 ICU nurses were trained. Post-MCQ scores were significantly higher when compared with pre-MCQ (P < .0001). More than 95% passed the post-course Objective Structured Clinical Assessment (patient assessment) and SOE 1 (arterial blood gas analysis), whereas 76.9% passed SOE 2 (3-lead electrocardiogram analysis). The course was highly rated by participants, with 98% believing that this was a useful experience. Nursing Intensive Care Skills Training was highly rated by participants and was effective in improving the knowledge of the participants. This sustainable short course model may be adaptable to other resource-limited settings. Copyright © 2014 Elsevier Inc. All rights reserved.

The Determinants of the Post-Adoption Satisfaction of Educators with an E-Learning System

ERIC Educational Resources Information Center

Islam, A. K. M. Najmul

2011-01-01

This paper examines factors that influence the post-adoption satisfaction of educators with e-learning systems. Based on the expectation-confirmation framework, we propose a research model that demonstrates how post-adoption beliefs affect post-adoption satisfaction. The model was tested at a university by educators (n = 175) who use an e-learning…

Factor structure and measurement invariance of the Health Education Impact Questionnaire: Does the subjectivity of the response perspective threaten the contextual validity of inferences?

PubMed Central

Elsworth, Gerald R; Nolte, Sandra

2015-01-01

Objective: On-going evidence is required to support the validity of inferences about change and group differences in the evaluation of health programs, particularly when self-report scales requiring substantial subjectivity in response generation are used as outcome measures. Following this reasoning, the aim of this study was to replicate the factor structure and investigate the measurement invariance of the latest version of the Health Education Impact Questionnaire, a widely used health program evaluation measure. Methods: An archived dataset of responses to the most recent version of the English-language Health Education Impact Questionnaire that uses four rather than six response options (N = 3221) was analysed using exploratory structural equation modelling and confirmatory factor analysis appropriate for ordered categorical data. Metric and scalar invariance were studied following recent recommendations in the literature to apply fully invariant unconditional models with minimum constraints necessary for model identification. Results: The original eight-factor structure was replicated and all but one of the scales (Self Monitoring and Insight) was found to consist of unifactorial items with reliability of ⩾0.8 and satisfactory discriminant validity. Configural, metric and scalar invariance were established across pre-test to post-test and population sub-groups (sex, age, education, ethnic background). Conclusion: The results support the high level of interest in the Health Education Impact Questionnaire, particularly for use as a pre-test/post-test measure in experimental studies, other pre–post evaluation designs and system-level monitoring and evaluation. PMID:26770785

Subsonic Dynamic Stability Tests of a Sample Return Entry Vehicle

NASA Technical Reports Server (NTRS)

Fremaux, C. Michael; Johnson, R. Keith

2006-01-01

An investigation has been conducted in the NASA Langley 20-Foot Vertical Spin Tunnel (VST) to determine the subsonic dynamic stability characteristics of a proposed atmospheric entry vehicle for sample return missions. In particular, the effects of changes in aft-body geometry on stability were examined. Freeflying tests of a dynamically scaled model with various geometric features were conducted, including cases in which the model was perturbed to measure dynamic response. Both perturbed and non-perturbed runs were recorded as motion time histories using the VST optical data acquisition system and reduced for post-test analysis. In addition, preliminary results from a static force and moment test of a similar model in the Langley 12-Foot Low Speed Tunnel are presented. Results indicate that the configuration is dynamically stable for the baseline geometry, but exhibits degraded dynamic behavior for the geometry modifications tested.

A three-gene panel on urine increases PSA specificity in the detection of prostate cancer.

PubMed

Rigau, Marina; Ortega, Israel; Mir, Maria Carmen; Ballesteros, Carlos; Garcia, Marta; Llauradó, Marta; Colás, Eva; Pedrola, Núria; Montes, Melania; Sequeiros, Tamara; Ertekin, Tugce; Majem, Blanca; Planas, Jacques; Ruiz, Anna; Abal, Miguel; Sánchez, Alex; Morote, Juan; Reventós, Jaume; Doll, Andreas

2011-12-01

Several studies have demonstrated the usefulness of monitoring an RNA transcript, such as PCA3, in post-prostate massage (PM) urine for increasing the specificity of prostate-specific antigen (PSA) in the detection of prostate cancer (PCa). However, a single marker may not necessarily reflect the multifactorial nature of PCa. We analyzed post-PM urine samples from 154 consecutive patients, who presented for prostate biopsies because of elevated serum PSA (>4 ng/ml) and/or abnormal digital rectal exam. We tested whether the putative PCa biomarkers PSMA, PSGR, and PCA3 could be detected by quantitative real-time PCR in post-PM urine sediment. We combined these findings to test if a combination of these biomarkers could improve the specificity of actual diagnosis. Afterwards, we specifically tested our model for clinical usefulness in the PSA diagnostic "gray zone" (4-10 ng/ml) on a target subset of 82 men with no prior biopsy. By univariate analysis, we found that the PSMA, PSGR, and PCA3 scores were significant predictors of PCa. Using a multiplex model, the area under the multi receiver-operating characteristic curve was 0.74 versus 0.82 in the diagnostic "gray zone." Fixing the sensitivity at 96%, we obtained a specificity of 34% and 50% in the gray zone. Taken together, these results provide a strategy for the development of a more accurate model for PCa diagnosis. In the future, a multiplexed, urine-based diagnostic test for PCa with a higher specificity, but the same sensitivity as the serum-PSA test, could be used to determine better which patients should undergo biopsy. Copyright © 2011 Wiley Periodicals, Inc.

Integrated corridor management analysis, modeling, and simulation for the I–15 corridor in San Diego, California—post-deployment analysis plan.

DOT National Transportation Integrated Search

2016-11-01

Post-Deployment Analysis, Modeling, and Simulation (AMS) activities focus on identifying impacts and benefits of the as-deployed Integrated Corridor Management (ICM) system. The as-deployed ICM strategies may differ from as-planned ...

Integrated corridor management : analysis, modeling, and simulation for the U.S.-15 corridor in Dallas, Texas—post-deployment analysis plan.

DOT National Transportation Integrated Search

2016-10-01

Post-Deployment Analysis, Modeling, and Simulation (AMS) activities focus on identifying impacts and benefits of the as-deployed Integrated Corridor Management (ICM) system. The as-deployed ICM strategies may differ from as-planned ...

Comparing Distance vs. Campus-Based Delivery of Research Methods Courses

ERIC Educational Resources Information Center

Girod, Mark; Wojcikiewicz, Steve

2009-01-01

A causal-comparative pre-test, post-test design was used to investigate differences in learning in a research methods course for face-to-face and web-based delivery models. Analyses of participant achievement (N = 205) revealed almost no differences but post-hoc analyses revealed important differences in pedagogy between delivery models despite…

The Application of Problem-Based Learning in Mechanical Engineering

NASA Astrophysics Data System (ADS)

Putra, Z. A.; Dewi, M.

2018-02-01

The course of Technology and Material Testing prepare students with the ability to do a variety of material testing in the study of mechanical engineering. Students find it difficult to understand the materials to make them unable to carry out the material testing in accordance with the purpose of study. This happens because they knowledge is not adequately supported by the competence to find and construct learning experience. In this study, quasy experiment research method with pre-post-test with control group design was used. The subjects of the study were students divided in two groups; control and experiment with twenty-two students in each group. Study result: their grades showed no difference in between the pre-test or post-test in control group, but the difference in grade existed between the pre-test and post-test in experiment group. Yet, there is no significant difference in the study result on both groups. The researcher recommend that it is necessary to develop Problem-Based Learning that suits need analysis on D3 Program for Mechanical Engineering Department at the State University of Padang, to ensure the compatibility between Model of Study and problems and need. This study aims to analyze how Problem-Based Learning effects on the course of Technology and Material Testing for the students of D3 Program of Mechanical Engineering of the State University of Padang.

The value of losartan suppression test in the confirmatory diagnosis of primary aldosteronism in patients over 50 years old.

PubMed

Kuo, Chin-Chi; Balakrishnan, Poojitha; Hsein, Yenh-Chen; Wu, Vin-Cent; Chueh, Shih-Chieh Jeff; Chen, Yung-Ming; Wu, Kwan-Dun; Wang, Ming-Jiuh

2015-09-01

The diagnosis of primary aldosteronism (PA) among the older-aged population has posed a crucial challenge. Among patients over 50 years old, this trial assessed comparability of the performance of two PA diagnostic tests: losartan and captopril suppression tests. A post-hoc subgroup analysis from a prospective cohort was conducted by the TAIPAI (Taiwan Primary Aldosteronism Investigation) group between July 2003 and July 2006. Of the 160 patients in the cohort, 60 patients over 50 years old received captopril and losartan tests to confirm PA. Among the 60 patients over 50 years old, 31 patients had PA confirmed by standardized protocol. The area under the receiver-operating characteristic (ROC) curve for post-captopril aldosterone was significantly less than that for post-losartan plasma aldosterone concentration (PAC) (0.87 vs 0.94, p=0.02). Using the aldosterone-renin ratio (ARR)>35 with PAC>10 ng/dl, the specificity was 82.76% vs 93.1% and the sensitivity was 77.42% vs 87.10% for the captopril and losartan tests, respectively. The equivalence between the two tests were confirmed by the exact McNemar's test (p=1.0). The losartan test showed comparable accuracy to confirm PA. Verification of this "elderly-friendly" confirmatory test will be the first step to prepare a specific diagnostic model of PA for the older-aged population. © The Author(s) 2014.

The Value of Losartan Suppression Test in the Confirmatory Diagnosis of Primary Aldosteronism in Patients Over 50 Years Old

PubMed Central

Kuo, Chin-Chi; Balakrishnan, Poojitha; Hsein, Yenh-Chen; Wu, Vin-Cent; Chueh, Shih-Chieh Jeff; Chen, Yung-Ming; Wu, Kwan-Dun; Wang, Ming-Jiuh

2013-01-01

Objective The diagnosis of primary aldosteronism (PA) among the older-aged population has posed a crucial challenge. Among patients over 50 years old, this trial assessed comparability of the performance of two PA diagnostic tests: losartan and captoril suppression tests. Methods A post-hoc subgroup analysis from a prospective cohort was conducted by TAIPAI (Taiwan Primary Aldosteornism Investigation) group between July 2003 and July 2006. Of the 160 patients in the cohort, 60 patients over 50 years received captopril and losartan tests to confirm PA. Results Among the 60 patients over 50 years old, 31 patients had PA confirmed by standardized protocol. The area under the receiver-operating characteristic (ROC) curve of the post-captopril aldosterone was significantly less than that of the post-losartan plasma aldosterone concentration (0.87 vs. 0.94, p = 0.02). Using ARR>35 with PAC>10 ng/dL, the specificity was 82.76% vs. 93.1% and the sensitivity was 77.42% vs. 87.10% for the captopril and losartan tests, respectively. The equivalence between the two tests were confirmed by exact McNemar test (p= 1.0). Conclusion The losartan test showed comparable accuracy to confirm PA. Verification of this “elderly-friendly” confirmatory test will be the first step to prepare the specific diagnostic model of PA for older-aged population. PMID:25031295

Analysis on pile testing results of post-grouting bored pile

NASA Astrophysics Data System (ADS)

Zheng, A. R.

2017-04-01

Based on static load test results, the bearing capacity of bored piles with pile-toe and pile-shaft post-grouting has been analyzed. The analysis reveals that: with post-grouting, the interface between pile and surrounding soil are strengthened and the relative sliding displacement in between is reduced; end resistance of pile is enhanced and can be mobilized at earlier stage with smaller sliding displacement. As a result, the performance of bored pile is improved with increased bearing capacity and reduced settlement.

Comparison between the Health Belief Model and Subjective Expected Utility Theory: predicting incontinence prevention behaviour in post-partum women.

PubMed

Dolman, M; Chase, J

1996-08-01

A small-scale study was undertaken to test the relative predictive power of the Health Belief Model and Subjective Expected Utility Theory for the uptake of a behaviour (pelvic floor exercises) to reduce post-partum urinary incontinence in primigravida females. A structured questionnaire was used to gather data relevant to both models from a sample antenatal and postnatal primigravida women. Questions examined the perceived probability of becoming incontinent, the perceived (dis)utility of incontinence, the perceived probability of pelvic floor exercises preventing future urinary incontinence, the costs and benefits of performing pelvic floor exercises and sources of information and knowledge about incontinence. Multiple regression analysis focused on whether or not respondents intended to perform pelvic floor exercises and the factors influencing their decisions. Aggregated data were analysed to compare the Health Belief Model and Subjective Expected Utility Theory directly.

Task-based learning versus problem-oriented lecture in neurology continuing medical education.

PubMed

Vakani, Farhan; Jafri, Wasim; Ahmad, Amina; Sonawalla, Aziz; Sheerani, Mughis

2014-01-01

To determine whether general practitioners learned better with task-based learning or problem-oriented lecture in a Continuing Medical Education (CME) set-up. Quasi-experimental study. The Aga Khan University, Karachi campus, from April to June 2012. Fifty-nine physicians were given a choice to opt for either Task-based Learning (TBL) or Problem Oriented Lecture (PBL) in a continuing medical education set-up about headaches. The TBL group had 30 participants divided into 10 small groups, and were assigned case-based tasks. The lecture group had 29 participants. Both groups were given a pre and a post-test. Pre/post assessment was done using one-best MCQs. The reliability coefficient of scores for both the groups was estimated through Cronbach's alpha. An item analysis for difficulty and discriminatory indices was calculated for both the groups. Paired t-test was used to determine the difference between pre- and post-test scores of both groups. Independent t-test was used to compare the impact of the two teaching methods in terms of learning through scores produced by MCQ test. Cronbach's alpha was 0.672 for the lecture group and 0.881 for TBL group. Item analysis for difficulty (p) and discriminatory indexes (d) was obtained for both groups. The results for the lecture group showed pre-test (p) = 42% vs. post-test (p) = 43%; pre- test (d) = 0.60 vs. post-test (d) = 0.40. The TBL group showed pre -test (p) = 48% vs. post-test (p) = 70%; pre-test (d) = 0.69 vs. post-test (d) = 0.73. Lecture group pre-/post-test mean scores were (8.52 ± 2.95 vs. 12.41 ± 2.65; p < 0.001), where TBL group showed (9.70 ± 3.65 vs. 14 ± 3.99; p < 0.001). Independent t-test exhibited an insignificant difference at baseline (lecture 8.52 ± 2.95 vs. TBL 9.70 ± 3.65; p = 0.177). The post-scores were not statistically different lecture 12.41 ± 2.65 vs. TBL 14 ± 3.99; p = 0.07). Both delivery methods were found to be equally effective, showing statistically insignificant differences. However, TBL groups' post-test higher mean scores and radical increase in the post-test difficulty index demonstrated improved learning through TBL delivery and calls for further exploration of longitudinal studies in the context of CME.

A Preliminary Evaluation of the Ability of Keratotic Tissue to Act as a Prognostic Indicator of Hip Fracture Risk

PubMed Central

Beattie, J Renwick; Feskanich, Diane; Caraher, M Clare; Towler, Mark R

2018-01-01

Studies have shown that Raman spectroscopic analysis of fingernail clippings can help differentiate between post-menopausal women who have and who have not suffered a fracture. However, all studies to date have been retrospective in nature, comparing the proteins in nails sourced from women, post-fracture. The objective of this study was to investigate the potential of a prospective test for hip fracture based on spectroscopic analysis of nail tissue. Archived toenail samples from post-menopausal women aged 50 to 63 years in the Nurses’ Health Study were obtained and analysed by Raman spectroscopy. Nails were matched case-controls sourced from 161 women; 82 who underwent a hip fracture up to 20 years after nail collection and 81 age-matched controls. A number of clinical risk factors (CRFs) from the Fracture Risk Assessment (FRAX) tool had been assessed at toenail collection. Using 80% of the spectra, models were developed for increasing time periods between nail collection and fracture. Scores were calculated from these models for the other 20% of the sample and the ability of the score to predict hip fracture was tested in model with and without the CRFs by comparing the odds ratios (ORs) per 1 SD increase in standardised predictive values. The Raman score successfully distinguished between hip fracture cases and controls. With only the score as a predictor, a statistically significant OR of 2.2 (95% confidence interval [CI]: 1.5-3.1) was found for hip fracture for up to 20 years after collection. The OR increased to 3.8 (2.6-5.4) when the CRFs were added to the model. For fractures limited to 13 years after collection, the OR was 6.3 (3.0-13.1) for the score alone. The test based on Raman spectroscopy has potential for identifying individuals who may suffer hip fractures several years in advance. Higher powered studies are required to evaluate the predictive capability of this test. PMID:29371785

Inferring Pre-shock Acoustic Field From Post-shock Pitot Pressure Measurement

NASA Astrophysics Data System (ADS)

Wang, Jian-Xun; Zhang, Chao; Duan, Lian; Xiao, Heng; Virginia Tech Team; Missouri Univ of Sci; Tech Team

2017-11-01

Linear interaction analysis (LIA) and iterative ensemble Kalman method are used to convert post-shock Pitot pressure fluctuations to static pressure fluctuations in front of the shock. The LIA is used as the forward model for the transfer function associated with a homogeneous field of acoustic waves passing through a nominally normal shock wave. The iterative ensemble Kalman method is then employed to infer the spectrum of upstream acoustic waves based on the post-shock Pitot pressure measured at a single point. Several test cases with synthetic and real measurement data are used to demonstrate the merits of the proposed inference scheme. The study provides the basis for measuring tunnel freestream noise with intrusive probes in noisy supersonic wind tunnels.

Evaluation of the Impact of Kerojet (trademark) Aquarius Water Scavenger Additive on the Thermal Stability of Jet A Fuels

DTIC Science & Technology

2014-12-01

113 Figure 64 - Elemental Analysis, Typical TMS Post - Test , Post Carbon Burn-off, Hexane rinsed ............ 114 Figure 65 – SEM (20X...Agency’s Wright-Patterson Aerospace Fuels Laboratory AFRL Air Force Research Laboratory AFTSTU Aviation Fuel Thermal Stability Test Unit ARSFSS Advanced...Approved for public release; distribution unlimited. For all ARSFSS testing , SV hysteresis is measure pre- and post - test and is defined by relating

Semen Analysis Test

MedlinePlus

... present in the semen sample. What does the test result mean? Post-vasectomy sperm check: Couples may discontinue using other ... Pp 400-415, 2017. (©2017) Mayo Medical Laboratories. Post Vasectomy Check, Semen. Available online at ... Accessed February 2017. ...

The use of pre-test and post-test probability values as criteria before selecting patients to undergo coronary angiography in patients who have ischemic findings on myocardial perfusion scintigraphy.

PubMed

Karahan Şen, Nazlı Pınar; Bekiş, Recep; Ceylan, Ali; Derebek, Erkan

2016-07-01

Myocardial perfusion scintigraphy (MPS) is a diagnostic test which is frequently used in the diagnosis of coronary heart disease (CHD). MPS is generally interpreted as ischemia present or absent; however, it has a power in predicting the disease, similar to other diagnostic tests. In this study, we aimed to assist in directing the high-risk patients to undergo coronary angiography (CA) primarily by evaluating patients without prior CHD history with pre-test and post-test probabilities. The study was designed as a retrospective study. Between January 2008 and July 2011, 139 patients with positive MPS results and followed by CA recently (<6 months) were evaluated from patient files. Patients' pre-test probabilities based on the Diamond and Forrester method and the likelihood ratios that were obtained from the literature were used to calculate the patients' post exercise and post-MPS probabilities. Patients were evaluated in risk groups as low, intermediate, and high, and an ROC curve analysis was performed for the post-MPS probabilities. Coronary artery stenosis (CAS) was determined in 59 patients (42.4%). A significant difference was determined between the risk groups according to CAS, both for the pre-test and post-test probabilities (p<0.001, p=0.024). The ROC analysis provided a cut-off value of 80.4% for post- MPS probability in predicting CAS with 67.9% sensitivity and 77.8% specificity. When the post-MPS probability is ≥80% in patients who have reversible perfusion defects on MPS, we suggest interpreting the MPS as "high probability positive" to improve the selection of true-positive patients to undergo CA, and these patients should be primarily recommended CA.

The use of pre-test and post-test probability values as criteria before selecting patients to undergo coronary angiography in patients who have ischemic findings on myocardial perfusion scintigraphy

PubMed Central

Şen, Nazlı Pınar Karahan; Bekiş, Recep; Ceylan, Ali; Derebek, Erkan

2016-01-01

Objective: Myocardial perfusion scintigraphy (MPS) is a diagnostic test which is frequently used in the diagnosis of coronary heart disease (CHD). MPS is generally interpreted as ischemia present or absent; however, it has a power in predicting the disease, similar to other diagnostic tests. In this study, we aimed to assist in directing the high-risk patients to undergo coronary angiography (CA) primarily by evaluating patients without prior CHD history with pre-test and post-test probabilities. Methods: The study was designed as a retrospective study. Between January 2008 and July 2011, 139 patients with positive MPS results and followed by CA recently (<6 months) were evaluated from patient files. Patients’ pre-test probabilities based on the Diamond and Forrester method and the likelihood ratios that were obtained from the literature were used to calculate the patients’ post-exercise and post-MPS probabilities. Patients were evaluated in risk groups as low, intermediate, and high, and an ROC curve analysis was performed for the post-MPS probabilities. Results: Coronary artery stenosis (CAS) was determined in 59 patients (42.4%). A significant difference was determined between the risk groups according to CAS, both for the pre-test and post-test probabilities (p<0.001, p=0.024). The ROC analysis provided a cut-off value of 80.4% for post-MPS probability in predicting CAS with 67.9% sensitivity and 77.8% specificity. Conclusion: When the post-MPS probability is ≥80% in patients who have reversible perfusion defects on MPS, we suggest interpreting the MPS as “high probability positive” to improve the selection of true-positive patients to undergo CA, and these patients should be primarily recommended CA. PMID:27004704

Briefly Cuing Memories Leads to Suppression of Their Neural Representations

PubMed Central

Norman, Kenneth A.

2014-01-01

Previous studies have linked partial memory activation with impaired subsequent memory retrieval (e.g., Detre et al., 2013) but have not provided an account of this phenomenon at the level of memory representations: How does partial activation change the neural pattern subsequently elicited when the memory is cued? To address this question, we conducted a functional magnetic resonance imaging (fMRI) experiment in which participants studied word-scene paired associates. Later, we weakly reactivated some memories by briefly presenting the cue word during a rapid serial visual presentation (RSVP) task; other memories were more strongly reactivated or not reactivated at all. We tested participants' memory for the paired associates before and after RSVP. Cues that were briefly presented during RSVP triggered reduced levels of scene activity on the post-RSVP memory test, relative to the other conditions. We used pattern similarity analysis to assess how representations changed as a function of the RSVP manipulation. For briefly cued pairs, we found that neural patterns elicited by the same cue on the pre- and post-RSVP tests (preA–postA; preB–postB) were less similar than neural patterns elicited by different cues (preA–postB; preB–postA). These similarity reductions were predicted by neural measures of memory activation during RSVP. Through simulation, we show that our pattern similarity results are consistent with a model in which partial memory activation triggers selective weakening of the strongest parts of the memory. PMID:24899722

A methodology to design heuristics for model selection based on the characteristics of data: Application to investigate when the Negative Binomial Lindley (NB-L) is preferred over the Negative Binomial (NB).

PubMed

Shirazi, Mohammadali; Dhavala, Soma Sekhar; Lord, Dominique; Geedipally, Srinivas Reddy

2017-10-01

Safety analysts usually use post-modeling methods, such as the Goodness-of-Fit statistics or the Likelihood Ratio Test, to decide between two or more competitive distributions or models. Such metrics require all competitive distributions to be fitted to the data before any comparisons can be accomplished. Given the continuous growth in introducing new statistical distributions, choosing the best one using such post-modeling methods is not a trivial task, in addition to all theoretical or numerical issues the analyst may face during the analysis. Furthermore, and most importantly, these measures or tests do not provide any intuitions into why a specific distribution (or model) is preferred over another (Goodness-of-Logic). This paper ponders into these issues by proposing a methodology to design heuristics for Model Selection based on the characteristics of data, in terms of descriptive summary statistics, before fitting the models. The proposed methodology employs two analytic tools: (1) Monte-Carlo Simulations and (2) Machine Learning Classifiers, to design easy heuristics to predict the label of the 'most-likely-true' distribution for analyzing data. The proposed methodology was applied to investigate when the recently introduced Negative Binomial Lindley (NB-L) distribution is preferred over the Negative Binomial (NB) distribution. Heuristics were designed to select the 'most-likely-true' distribution between these two distributions, given a set of prescribed summary statistics of data. The proposed heuristics were successfully compared against classical tests for several real or observed datasets. Not only they are easy to use and do not need any post-modeling inputs, but also, using these heuristics, the analyst can attain useful information about why the NB-L is preferred over the NB - or vice versa- when modeling data. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of Cricoid Pressure Force and Technique Among Anesthesiologists, Nurse Anesthetists, and Registered Nurses.

PubMed

Lefave, Melissa; Harrell, Brad; Wright, Molly

2016-06-01

The purpose of this project was to assess the ability of anesthesiologists, nurse anesthetists, and registered nurses to correctly identify anatomic landmarks of cricoid pressure and apply the correct amount of force. The project included an educational intervention with one group pretest-post-test design. Participants demonstrated cricoid pressure on a laryngotracheal model. After an educational intervention video, participants were asked to repeat cricoid pressure on the model. Participants with a nurse anesthesia background applied more appropriate force pretest than other participants; however, post-test results, while improved, showed no significant difference among providers. Participant identification of the correct anatomy of the cricoid cartilage and application of correct force were significantly improved after education. This study revealed that participants lacked prior knowledge of correct cricoid anatomy and pressure as well as the ability to apply correct force to the laryngotracheal model before an educational intervention. The intervention used in this study proved successful in educating health care providers. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

Empirical Model for Predicting Rockfall Trajectory Direction

NASA Astrophysics Data System (ADS)

Asteriou, Pavlos; Tsiambaos, George

2016-03-01

A methodology for the experimental investigation of rockfall in three-dimensional space is presented in this paper, aiming to assist on-going research of the complexity of a block's response to impact during a rockfall. An extended laboratory investigation was conducted, consisting of 590 tests with cubical and spherical blocks made of an artificial material. The effects of shape, slope angle and the deviation of the post-impact trajectory are examined as a function of the pre-impact trajectory direction. Additionally, an empirical model is proposed that estimates the deviation of the post-impact trajectory as a function of the pre-impact trajectory with respect to the slope surface and the slope angle. This empirical model is validated by 192 small-scale field tests, which are also presented in this paper. Some important aspects of the three-dimensional nature of rockfall phenomena are highlighted that have been hitherto neglected. The 3D space data provided in this study are suitable for the calibration and verification of rockfall analysis software that has become increasingly popular in design practice.

Seasonal trend analysis and ARIMA modeling of relative humidity and wind speed time series around Yamula Dam

NASA Astrophysics Data System (ADS)

Eymen, Abdurrahman; Köylü, Ümran

2018-02-01

Local climate change is determined by analysis of long-term recorded meteorological data. In the statistical analysis of the meteorological data, the Mann-Kendall rank test, which is one of the non-parametrical tests, has been used; on the other hand, for determining the power of the trend, Theil-Sen method has been used on the data obtained from 16 meteorological stations. The stations cover the provinces of Kayseri, Sivas, Yozgat, and Nevşehir in the Central Anatolia region of Turkey. Changes in land-use affect local climate. Dams are structures that cause major changes on the land. Yamula Dam is located 25 km northwest of Kayseri. The dam has huge water body which is approximately 85 km2. The mentioned tests have been used for detecting the presence of any positive or negative trend in meteorological data. The meteorological data in relation to the seasonal average, maximum, and minimum values of the relative humidity and seasonal average wind speed have been organized as time series and the tests have been conducted accordingly. As a result of these tests, the following have been identified: increase was observed in minimum relative humidity values in the spring, summer, and autumn seasons. As for the seasonal average wind speed, decrease was detected for nine stations in all seasons, whereas increase was observed in four stations. After the trend analysis, pre-dam mean relative humidity time series were modeled with Autoregressive Integrated Moving Averages (ARIMA) model which is statistical modeling tool. Post-dam relative humidity values were predicted by ARIMA models.

Standardization and validation of real time PCR assays for the diagnosis of histoplasmosis using three molecular targets in an animal model.

PubMed

López, Luisa F; Muñoz, César O; Cáceres, Diego H; Tobón, Ángela M; Loparev, Vladimir; Clay, Oliver; Chiller, Tom; Litvintseva, Anastasia; Gade, Lalitha; González, Ángel; Gómez, Beatriz L

2017-01-01

Histoplasmosis is considered one of the most important endemic and systemic mycoses worldwide. Until now few molecular techniques have been developed for its diagnosis. The aim of this study was to develop and evaluate three real time PCR (qPCR) protocols for different protein-coding genes (100-kDa, H and M antigens) using an animal model. Fresh and formalin-fixed and paraffin-embedded (FFPE) lung tissues from BALB/c mice inoculated i.n. with 2.5x106 Histoplasma capsulatum yeast or PBS were obtained at 1, 2, 3, 4, 8, 12 and 16 weeks post-infection. A collection of DNA from cultures representing different clades of H. capsulatum (30 strains) and other medically relevant pathogens (36 strains of related fungi and Mycobacterium tuberculosis) were used to analyze sensitivity and specificity. Analytical sensitivity and specificity were 100% when DNAs from the different strains were tested. The highest fungal burden occurred at first week post-infection and complete fungal clearance was observed after the third week; similar results were obtained when the presence of H. capsulatum yeast cells was demonstrated in histopathological analysis. In the first week post-infection, all fresh and FFPE lung tissues from H. capsulatum-infected animals were positive for the qPCR protocols tested except for the M antigen protocol, which gave variable results when fresh lung tissue samples were analyzed. In the second week, all qPCR protocols showed variable results for both fresh and FFPE tissues. Samples from the infected mice at the remaining times post-infection and uninfected mice (controls) were negative for all protocols. Good agreement was observed between CFUs, histopathological analysis and qPCR results for the 100-kDa and H antigen protocols. We successfully standardized and validated three qPCR assays for detecting H. capsulatum DNA in fresh and FFPE tissues, and conclude that the 100-kDa and H antigen molecular assays are promising tests for diagnosing this mycosis.

Influence of Hip Abductor Strength on Functional Outcomes Before and After Total Knee Arthroplasty: Post Hoc Analysis of a Randomized Controlled Trial.

PubMed

Loyd, Brian J; Jennings, Jason M; Judd, Dana L; Kim, Raymond H; Wolfe, Pamela; Dennis, Douglas A; Stevens-Lapsley, Jennifer E

2017-09-01

Total knee arthroplasty (TKA) is associated with declines in hip abductor (HA) muscle strength; however, a longitudinal analysis demonstrating the influence of TKA on trajectories of HA strength change has not been conducted. The purpose of this study was to quantify changes in HA strength from pre-TKA through 3 months post-TKA and to characterize the relationship between HA strength changes and physical performance. This study is a post hoc analysis of a randomized controlled trial. Data from 162 participants (89 women, mean age = 63 y) were used for analysis. Data were collected by masked assessors preoperatively and at 1 and 3 months following surgery. Outcomes included: Timed "Up and Go" test (TUG), Stair Climbing Test (SCT), Six-Minute Walk Test (6MWT), and walking speed. Paired t tests were used for between- and within-limb comparisons of HA strength. Multivariable regression was used to determine contributions of independent variables, HA and knee extensor strength, to the dependent variables of TUG, SCT, 6MWT, and walking speed at each time point. Hip abductor strength was significantly lower in the surgical limb pre-TKA (mean = 0.015; 95% CI = 0.010-0.020), 1 month post-TKA (0.028; 0.023-0.034), and 3 months post-TKA (0.02; 0.014-0.025) compared with the nonsurgical limb. Hip abductor strength declined from pre-TKA to 1 month post-TKA (18%), but not at the 3-month time point (0%). Hip abductor strength independently contributed to performance-based outcomes pre-TKA; however, this contribution was not observed post-TKA. The post hoc analysis prevents examining all outcomes likely to be influenced by HA strength. Surgical limb HA strength is impaired prior to TKA, and worsens following surgery. Furthermore, HA strength contributes to performance-based outcomes, supporting the hypothesis that HA strength influences functional recovery. © 2017 American Physical Therapy Association

Zinc Finger Transcription Factors as Novel Genetic Switches to Modulate Metastatic Progression of Breast Tumors

DTIC Science & Technology

2008-05-01

critical level of significance set up at P < 0.05, and significant differences between groups of treatments were analyzed with post hoc Turkish test ...2008 differences between groups of treatments were analyzed with post hoc Turkish test . As shown in Fig. 2A, particular ATFs synergized with chromatin...using ANOVA test and the post hoc Turkish test ; critical level of significance was set up at P < 0.05. B, real- time expression analysis of maspin mRNA

Enhancements to the Engine Data Interpretation System (EDIS)

NASA Technical Reports Server (NTRS)

Hofmann, Martin O.

1993-01-01

The Engine Data Interpretation System (EDIS) expert system project assists the data review personnel at NASA/MSFC in performing post-test data analysis and engine diagnosis of the Space Shuttle Main Engine (SSME). EDIS uses knowledge of the engine, its components, and simple thermodynamic principles instead of, and in addition to, heuristic rules gathered from the engine experts. EDIS reasons in cooperation with human experts, following roughly the pattern of logic exhibited by human experts. EDIS concentrates on steady-state static faults, such as small leaks, and component degradations, such as pump efficiencies. The objective of this contract was to complete the set of engine component models, integrate heuristic rules into EDIS, integrate the Power Balance Model into EDIS, and investigate modification of the qualitative reasoning mechanisms to allow 'fuzzy' value classification. The results of this contract is an operational version of EDIS. EDIS will become a module of the Post-Test Diagnostic System (PTDS) and will, in this context, provide system-level diagnostic capabilities which integrate component-specific findings provided by other modules.

Decreasing assault occurrence on a psychogeriatric ward: an agitation management model.

PubMed

Savage, Troy; Crawford, Ian; Nashed, Yousery

2004-05-01

An agitation management model providing staff education, quantitative assessment of agitation, and emphasized psychosocial interventions was introduced on a geriatric psychiatry ward for male patients. A within-subjects comparison was made of Cohen-Mansfield Agitation Inventory (CMAI) scores and frequency of committing assault under pre- and post-intervention conditions. Among participants (N = 8) who finished the 72-week study, CMAI scores did not differ significantly under either of the study conditions (p > .05, two-tailed t test). Twenty-nine assaults occurred during the pre-intervention time period and six assaults occurred during the post-intervention time period. According to analysis with the Wilcoxon signed ranks test, the distribution of assaults differed significantly between the two time periods (p < .05, two-tailed). Among individuals who were excluded from the intervention because of lack of consent, assaults increased over the same two time periods. Psychosocial interventions intended to reduce agitation among elderly men with dementia may not necessarily serve to decrease agitation, but may serve to decrease assault occurrence.

Enhancements to the Engine Data Interpretation System (EDIS)

NASA Technical Reports Server (NTRS)

Hofmann, Martin O.

1993-01-01

The Engine Data Interpretation System (EDIS) expert system project assists the data review personnel at NASA/MSFC in performing post-test data analysis and engine diagnosis of the Space Shuttle Main Engine (SSME). EDIS uses knowledge of the engine, its components, and simple thermodynamic principles instead of, and in addition to, heuristic rules gathered from the engine experts. EDIS reasons in cooperation with human experts, following roughly the pattern of logic exhibited by human experts. EDIS concentrates on steady-state static faults, such as small leaks, and component degradations, such as pump efficiencies. The objective of this contract was to complete the set of engine component models, integrate heuristic rules into EDIS, integrate the Power Balance Model into EDIS, and investigate modification of the qualitative reasoning mechanisms to allow 'fuzzy' value classification. The result of this contract is an operational version of EDIS. EDIS will become a module of the Post-Test Diagnostic System (PTDS) and will, in this context, provide system-level diagnostic capabilities which integrate component-specific findings provided by other modules.

Regional Lymph Node Uptake of [{sup 18}F]Fluorodeoxyglucose After Definitive Chemoradiation Therapy Predicts Local-Regional Failure of Locally Advanced Non-Small Cell Lung Cancer: Results of ACRIN 6668/RTOG 0235

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markovina, Stephanie; Duan, Fenghai; Snyder, Bradley S.

2015-11-01

Purpose: The American College of Radiology Imaging Network (ACRIN) 6668/Radiation Therapy Oncology Group (RTOG) 0235 study demonstrated that standardized uptake values (SUV) on post-treatment [{sup 18}F]fluorodeoxyglucose-positron emission tomography (FDG-PET) correlated with survival in locally advanced non-small cell lung cancer (NSCLC). This secondary analysis determined whether SUV of regional lymph nodes (RLNs) on post-treatment FDG-PET correlated with patient outcomes. Methods and Materials: Included for analysis were patients treated with concurrent chemoradiation therapy, using radiation doses ≥60 Gy, with identifiable FDG-avid RLNs (distinct from primary tumor) on pretreatment FDG-PET, and post-treatment FDG-PET data. ACRIN core laboratory SUV measurements were used. Event time was calculatedmore » from the date of post-treatment FDG-PET. Local-regional failure was defined as failure within the treated RT volume and reported by the treating institution. Statistical analyses included Wilcoxon signed rank test, Kaplan-Meier curves (log rank test), and Cox proportional hazards regression modeling. Results: Of 234 trial-eligible patients, 139 (59%) had uptake in both primary tumor and RLNs on pretreatment FDG-PET and had SUV data from post-treatment FDG-PET. Maximum SUV was greater for primary tumor than for RLNs before treatment (P<.001) but not different post-treatment (P=.320). Post-treatment SUV of RLNs was not associated with overall survival. However, elevated post-treatment SUV of RLNs, both the absolute value and the percentage of residual activity compared to the pretreatment SUV were associated with inferior local-regional control (P<.001). Conclusions: High residual metabolic activity in RLNs on post-treatment FDG-PET is associated with worse local-regional control. Based on these data, future trials evaluating a radiation therapy boost should consider inclusion of both primary tumor and FDG-avid RLNs in the boost volume to maximize local-regional control.« less

Analysis and evaluation of the biofidelity of the human body finite element model in lateral impact simulations according to ISO-TR9790 procedures.

PubMed

Ruan, Jesse S; El-Jawahri, Raed; Rouhana, Stephen W; Barbat, Saeed; Prasad, Priya

2006-11-01

The biofidelity of the Ford Motor Company human body finite element (FE) model in side impact simulations was analyzed and evaluated following the procedures outlined in ISO technical report TR9790. This FE model, representing a 50th percentile adult male, was used to simulate the biomechanical impact tests described in ISO-TR9790. These laboratory tests were considered as suitable for assessing the lateral impact biofidelity of the head, neck, shoulder, thorax, abdomen, and pelvis of crash test dummies, subcomponent test devices, and math models that are used to represent a 50th percentile adult male. The simulated impact responses of the head, neck, shoulder, thorax, abdomen, and pelvis of the FE model were compared with the PMHS (Post Mortem Human Subject) data upon which the response requirements for side impact surrogates was based. An overall biofidelity rating of the human body FE model was determined using the ISO-TR9790 rating method. The resulting rating for the human body FE model was 8.5 on a 0 to 10 scale with 8.6-10 being excellent biofidelity. In addition, in order to explore whether there is a dependency of the impact responses of the FE model on different analysis codes, three commercially available analysis codes, namely, LS-DYNA, Pamcrash, and Radioss were used to run the human body FE model. Effects of these codes on biofidelity when compared with ISO-TR9790 data are discussed. Model robustness and numerical issues arising with three different code simulations are also discussed.

Space Launch System Ascent Static Aerodynamic Database Development

NASA Technical Reports Server (NTRS)

Pinier, Jeremy T.; Bennett, David W.; Blevins, John A.; Erickson, Gary E.; Favaregh, Noah M.; Houlden, Heather P.; Tomek, William G.

2014-01-01

This paper describes the wind tunnel testing work and data analysis required to characterize the static aerodynamic environment of NASA's Space Launch System (SLS) ascent portion of flight. Scaled models of the SLS have been tested in transonic and supersonic wind tunnels to gather the high fidelity data that is used to build aerodynamic databases. A detailed description of the wind tunnel test that was conducted to produce the latest version of the database is presented, and a representative set of aerodynamic data is shown. The wind tunnel data quality remains very high, however some concerns with wall interference effects through transonic Mach numbers are also discussed. Post-processing and analysis of the wind tunnel dataset are crucial for the development of a formal ascent aerodynamics database.

Statistical analysis of modeling error in structural dynamic systems

NASA Technical Reports Server (NTRS)

Hasselman, T. K.; Chrostowski, J. D.

1990-01-01

The paper presents a generic statistical model of the (total) modeling error for conventional space structures in their launch configuration. Modeling error is defined as the difference between analytical prediction and experimental measurement. It is represented by the differences between predicted and measured real eigenvalues and eigenvectors. Comparisons are made between pre-test and post-test models. Total modeling error is then subdivided into measurement error, experimental error and 'pure' modeling error, and comparisons made between measurement error and total modeling error. The generic statistical model presented in this paper is based on the first four global (primary structure) modes of four different structures belonging to the generic category of Conventional Space Structures (specifically excluding large truss-type space structures). As such, it may be used to evaluate the uncertainty of predicted mode shapes and frequencies, sinusoidal response, or the transient response of other structures belonging to the same generic category.

Single Group, Pre- and Post-Test Research Designs: Some Methodological Concerns

ERIC Educational Resources Information Center

Marsden, Emma; Torgerson, Carole J.

2012-01-01

This article provides two illustrations of some of the factors that can influence findings from pre- and post-test research designs in evaluation studies, including regression to the mean (RTM), maturation, history and test effects. The first illustration involves a re-analysis of data from a study by Marsden (2004), in which pre-test scores are…

Structural Analysis and Test Comparison of a 20-Meter Inflation-Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Sleight, David W.; Mann, Troy; Lichodziejewski, David; Derbes, Billy

2006-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive test program was implemented to advance the technology readiness level of the solar sail design. These tests consisted of solar sail component, subsystem, and sub-scale system ground tests that simulated the aspects of the space environment such as vacuum and thermal conditions. In July 2005, a 20-m four-quadrant solar sail system test article was tested in the NASA Glenn Research Center s Space Power Facility to measure its static and dynamic structural responses. Key to the maturation of solar sail technology is the development of validated finite element analysis (FEA) models that can be used for design and analysis of solar sails. A major objective of the program was to utilize the test data to validate the FEA models simulating the solar sail ground tests. The FEA software, ABAQUS, was used to perform the structural analyses to simulate the ground tests performed on the 20-m solar sail test article. This paper presents the details of the FEA modeling, the structural analyses simulating the ground tests, and a comparison of the pretest and post-test analysis predictions with the ground test results for the 20-m solar sail system test article. The structural responses that are compared in the paper include load-deflection curves and natural frequencies for the beam structural assembly and static shape, natural frequencies, and mode shapes for the solar sail membrane. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were unmeasured initial conditions in the test set-up.

Finite Element Analysis and Test Correlation of a 10-Meter Inflation-Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Sleight, David W.; Michii, Yuki; Lichodziejewski, David; Derbes, Billy; Mann. Troy O.; Slade, Kara N.; Wang, John T.

2005-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA's future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive phased test plan is currently being implemented to advance the technology readiness level of the solar sail design. These tests consist of solar sail component, subsystem, and sub-scale system ground tests that simulate the vacuum and thermal conditions of the space environment. Recently, two solar sail test articles, a 7.4-m beam assembly subsystem test article and a 10-m four-quadrant solar sail system test article, were tested in vacuum conditions with a gravity-offload system to mitigate the effects of gravity. This paper presents the structural analyses simulating the ground tests and the correlation of the analyses with the test results. For programmatic risk reduction, a two-prong analysis approach was undertaken in which two separate teams independently developed computational models of the solar sail test articles using the finite element analysis software packages: NEiNastran and ABAQUS. This paper compares the pre-test and post-test analysis predictions from both software packages with the test data including load-deflection curves from static load tests, and vibration frequencies and mode shapes from vibration tests. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were uncertainties in the material properties, test conditions, and modeling assumptions used in the analyses.

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post Documentation, experiments, web content Nicole McKee Makefiles, scripts, launcher Edward Colon NEMSIO, post Yang GFS post Hui-ya Chuang NAM development Tom Black Dusan Jovic Jim Abeles GFS development S Moorthi

Pregabalin reduces acute inflammatory and persistent pain associated with nerve injury and cancer in rat models of orofacial pain.

PubMed

Hummig, Wagner; Kopruszinski, Caroline Machado; Chichorro, Juliana Geremias

2014-01-01

To assess the analgesic effect of pregabalin in orofacial models of acute inflammatory pain and of persistent pain associated with nerve injury and cancer, and so determine its effectiveness in controlling orofacial pains having different underlying mechanisms. Orofacial capsaicin and formalin tests were employed in male Wistar rats to assess the influence of pregabalin (or vehicle) pretreatment in acute pain models, and the results from these experiments were analyzed by one-way analysis of variance (ANOVA) followed by Newman Keuls post-hoc test. Pregabalin (or vehicle) treatment was also tested on the facial heat hyperalgesia that was evaluated in rats receiving injection of the inflammatory irritant carrageenan into the upper lip, as well as after constriction of the infraorbital nerve (a model of trigeminal neuropathic pain), or after inoculation of tumor cells into the facial vibrissal pad; two-way repeated measures ANOVA followed by Newman-Keuls post-hoc test was used to analyze data from these experiments. Facial grooming induced by capsaicin was abolished by pretreatment with pregabalin at 10 and 30 mg/kg. However, pregabalin failed to modify the first phase of the formalin response, but reduced the second phase at both doses (10 and 30 mg/kg). In addition, treatment of rats with pregabalin reduced the heat hyperalgesia induced by carrageenan, as well as by nerve injury and facial cancer. Pregabalin produced a marked antinociceptive effect in rat models of facial inflammatory pain as well as in facial neuropathic and cancer pain models, suggesting that it may represent an important agent for the clinical control of orofacial pain.

Analysis of the Seismic Events Apparently Associated with the 3 September 2017 DPRK Declared Nuclear Explosion

NASA Astrophysics Data System (ADS)

Walter, W. R.; Dodge, D. A.; Ichinose, G.; Myers, S. C.; Ford, S. R.; Pitarka, A.; Pyle, M. L.; Pasyanos, M.; Matzel, E.; Rodgers, A. J.; Mellors, R. J.; Hauk, T. F.; Kroll, K.

2017-12-01

On September 3, 2017, an mb 6.3 seismic event was reported by the USGS in the vicinity of the DPRK nuclear test site at Punggye-ri. Shortly afterwards DPRK declared it had conducted a nuclear explosion. The seismic signals indicate this event is roughly an order of magnitude larger than the largest of the previous five DPRK declared nuclear tests. In addition to its size, this explosion was different from previous DPRK tests in being associated with a number of additional seismic events. Approximately eight and a half minutes after the explosion a seismic event reported as ML 4.0 by the USGS occurred. Regional waveform modeling indicated this event had a collapse mechanism (e.g. Ichinose et al., 2017, written communication). On September 23 and again on October 12, 2017, seismic events were reported near the DPRK test site by the USGS and the CTBTO (on 9/23/17 two events: USGS ML 3.6 and USGS ML 2.6; and on 10/12/17 one event: USGS mb(Lg) 2.9). Aftershocks following underground nuclear testing are expected, though at much lower magnitudes and rates than for comparably sized earthquakes. This difference in aftershock production has been proposed by Ford and Walter (2010), and others as a potential source-type discriminant. Seismic signals from the collapse of cavities formed by underground nuclear testing have also been previously observed. For example, the mb 5.7 nuclear test ATRISCO in Nevada in 1982 was followed twenty minutes later by a collapse with an mb of 4.0. Here we examine the seismic characteristics of nuclear tests, post-test collapses and post-test aftershocks from both the former Nevada test site and the DPRK test site to better understand the differences between these different source-type signals. In particular we look at discriminants such as P/S ratios, to see if there are unique characteristics to post-test collapses and aftershocks. Finally, we apply correlation methods to continuous data at regional stations to look for additional seismic signals that might have an apparent association with the DPRK nuclear testing, post-testing collapses and post-test induced seismicity.

Utilization of an Enhanced Canonical Correlation Analysis (ECCA) to Predict Daily Precipitation and Temperature in a Semi-Arid Environment

NASA Astrophysics Data System (ADS)

Lopez, S. R.; Hogue, T. S.

2011-12-01

Global climate models (GCMs) are primarily used to generate historical and future large-scale circulation patterns at a coarse resolution (typical order of 50,000 km2) and fail to capture climate variability at the ground level due to localized surface influences (i.e topography, marine, layer, land cover, etc). Their inability to accurately resolve these processes has led to the development of numerous 'downscaling' techniques. The goal of this study is to enhance statistical downscaling of daily precipitation and temperature for regions with heterogeneous land cover and topography. Our analysis was divided into two periods, historical (1961-2000) and contemporary (1980-2000), and tested using sixteen predictand combinations from four GCMs (GFDL CM2.0, GFDL CM2.1, CNRM-CM3 and MRI-CGCM2 3.2a. The Southern California area was separated into five county regions: Santa Barbara, Ventura, Los Angeles, Orange and San Diego. Principle component analysis (PCA) was performed on ground-based observations in order to (1) reduce the number of redundant gauges and minimize dimensionality and (2) cluster gauges that behave statistically similarly for post-analysis. Post-PCA analysis included extensive testing of predictor-predictand relationships using an enhanced canonical correlation analysis (ECCA). The ECCA includes obtaining the optimal predictand sets for all models within each spatial domain (county) as governed by daily and monthly overall statistics. Results show all models maintain mean annual and monthly behavior within each county and daily statistics are improved. The level of improvement highly depends on the vegetation extent within each county and the land-to-ocean ratio within the GCM spatial grid. The utilization of the entire historical period also leads to better statistical representation of observed daily precipitation. The validated ECCA technique is being applied to future climate scenarios distributed by the IPCC in order to provide forcing data for regional hydrologic models and assess future water resources in the Southern California region.

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post Contacts Change Log Events Calendar People Numerical Forecast Systems Ensemble and Post Processing Team

Structural Analysis of an Inflation-Deployed Solar Sail With Experimental Validation

NASA Technical Reports Server (NTRS)

Sleight, David W.; Michii, Yuki; Lichodziejewski, David; Derbes, Billy; Mann, Troy O.

2005-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive phased test plan is currently being implemented to advance the technology readiness level of the solar sail design. These tests consist of solar sail component, subsystem, and sub-scale system ground tests that simulate the vacuum and thermal conditions of the space environment. Recently, two solar sail test articles, a 7.4-m beam assembly subsystem test article and a 10-m four-quadrant solar sail system test article, were tested in vacuum conditions with a gravity-offload system to mitigate the effects of gravity. This paper presents the structural analyses simulating the ground tests and the correlation of the analyses with the test results. For programmatic risk reduction, a two-prong analysis approach was undertaken in which two separate teams independently developed computational models of the solar sail test articles using the finite element analysis software packages: NEiNastran and ABAQUS. This paper compares the pre-test and post-test analysis predictions from both software packages with the test data including load-deflection curves from static load tests, and vibration frequencies and mode shapes from structural dynamics tests. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were uncertainties in the material properties, test conditions, and modeling assumptions used in the analyses.

The choice of product indicators in latent variable interaction models: post hoc analyses.

PubMed

Foldnes, Njål; Hagtvet, Knut Arne

2014-09-01

The unconstrained product indicator (PI) approach is a simple and popular approach for modeling nonlinear effects among latent variables. This approach leaves the practitioner to choose the PIs to be included in the model, introducing arbitrariness into the modeling. In contrast to previous Monte Carlo studies, we evaluated the PI approach by 3 post hoc analyses applied to a real-world case adopted from a research effort in social psychology. The measurement design applied 3 and 4 indicators for the 2 latent 1st-order variables, leaving the researcher with a choice among more than 4,000 possible PI configurations. Sixty so-called matched-pair configurations that have been recommended in previous literature are of special interest. In the 1st post hoc analysis we estimated the interaction effect for all PI configurations, keeping the real-world sample fixed. The estimated interaction effect was substantially affected by the choice of PIs, also across matched-pair configurations. Subsequently, a post hoc Monte Carlo study was conducted, with varying sample sizes and data distributions. Convergence, bias, Type I error and power of the interaction test were investigated for each matched-pair configuration and the all-pairs configuration. Variation in estimates across matched-pair configurations for a typical sample was substantial. The choice of specific configuration significantly affected convergence and the interaction test's outcome. The all-pairs configuration performed overall better than the matched-pair configurations. A further advantage of the all-pairs over the matched-pairs approach is its unambiguity. The final study evaluates the all-pairs configuration for small sample sizes and compares it to the non-PI approach of latent moderated structural equations. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Manual versus Automated Rodent Behavioral Assessment: Comparing Efficacy and Ease of Bederson and Garcia Neurological Deficit Scores to an Open Field Video-Tracking System.

PubMed

Desland, Fiona A; Afzal, Aqeela; Warraich, Zuha; Mocco, J

2014-01-01

Animal models of stroke have been crucial in advancing our understanding of the pathophysiology of cerebral ischemia. Currently, the standards for determining neurological deficit in rodents are the Bederson and Garcia scales, manual assessments scoring animals based on parameters ranked on a narrow scale of severity. Automated open field analysis of a live-video tracking system that analyzes animal behavior may provide a more sensitive test. Results obtained from the manual Bederson and Garcia scales did not show significant differences between pre- and post-stroke animals in a small cohort. When using the same cohort, however, post-stroke data obtained from automated open field analysis showed significant differences in several parameters. Furthermore, large cohort analysis also demonstrated increased sensitivity with automated open field analysis versus the Bederson and Garcia scales. These early data indicate use of automated open field analysis software may provide a more sensitive assessment when compared to traditional Bederson and Garcia scales.

Implementation of an acute care emergency surgical service: a cost analysis from the surgeon’s perspective

PubMed Central

Anantha, Ram Venkatesh; Parry, Neil; Vogt, Kelly; Jain, Vipan; Crawford, Silvie; Leslie, Ken

2014-01-01

Background Acute care surgical services provide comprehensive emergency general surgical care while potentially using health care resources more efficiently. We assessed the volume and distribution of emergency general surgery (EGS) procedures before and after the implementation of the Acute Care and Emergency Surgery Service (ACCESS) at a Canadian tertiary care hospital and its effect on surgeon billings. Methods This single-centre retrospective case–control study compared adult patients who underwent EGS procedures between July and December 2009 (pre-ACCESS), to those who had surgery between July and December 2010 (post-ACCESS). Case distribution was compared between day (7 am to 3 pm), evening (3 pm to 11 pm) and night (11 pm to 7 am). Frequencies were compared using the χ2 test. Results Pre-ACCESS, 366 EGS procedures were performed: 24% during the day, 55% in the evening and 21% at night. Post-ACCESS, 463 operations were performed: 55% during the day, 36% in the evening and 9% at night. Reductions in night-time and evening EGS were 57% and 36% respectively (p < 0.001). Total surgeon billings for operations pre- and post-ACCESS were $281 066 and $287 075, respectively: remuneration was $6008 higher post-ACCESS for an additional 97 cases (p = 0.003). Using cost-modelling analysis, post-ACCESS surgeon billing for appendectomies, segmental colectomies, laparotomies and cholecystectomies all declined by $67 190, $125 215, $66 362, and $84 913, respectively (p < 0.001). Conclusion Acute care surgical services have dramatically shifted EGS from nighttime to daytime. Cost-modelling analysis demonstrates that these services have cost-savings potential for the health care system without reducing overall surgeon billing. PMID:24666462

Implementation of an acute care emergency surgical service: a cost analysis from the surgeon's perspective.

PubMed

Anantha, Ram Venkatesh; Parry, Neil; Vogt, Kelly; Jain, Vipan; Crawford, Silvie; Leslie, Ken

2014-04-01

Acute care surgical services provide comprehensive emergency general surgical care while potentially using health care resources more efficiently. We assessed the volume and distribution of emergency general surgery (EGS) procedures before and after the implementation of the Acute Care and Emergency Surgery Service (ACCESS) at a Canadian tertiary care hospital and its effect on surgeon billings. This single-centre retrospective case-control study compared adult patients who underwent EGS procedures between July and December 2009 (pre-ACCESS), to those who had surgery between July and December 2010 (post-ACCESS). Case distribution was compared between day (7 am to 3 pm), evening (3 pm to 11 pm) and night (11 pm to 7 am). Frequencies were compared using the χ(2) test. Pre-ACCESS, 366 EGS procedures were performed: 24% during the day, 55% in the evening and 21% at night. Post-ACCESS, 463 operations were performed: 55% during the day, 36% in the evening and 9% at night. Reductions in night-time and evening EGS were 57% and 36% respectively (p < 0.001). Total surgeon billings for operations pre- and post-ACCESS were $281 066 and $287 075, respectively: remuneration was $6008 higher post-ACCESS for an additional 97 cases (p = 0.003). Using cost-modelling analysis, post-ACCESS surgeon billing for appendectomies, segmental colectomies, laparotomies and cholecystectomies all declined by $67 190, $125 215, $66 362, and $84 913, respectively (p < 0.001). Acute care surgical services have dramatically shifted EGS from nighttime to daytime. Cost-modelling analysis demonstrates that these services have cost-savings potential for the health care system without reducing overall surgeon billing.

Multilevel Multidimensional Item Response Model with a Multilevel Latent Covariate

ERIC Educational Resources Information Center

Cho, Sun-Joo; Bottge, Brian A.

2015-01-01

In a pretest-posttest cluster-randomized trial, one of the methods commonly used to detect an intervention effect involves controlling pre-test scores and other related covariates while estimating an intervention effect at post-test. In many applications in education, the total post-test and pre-test scores that ignores measurement error in the…

Post-examination interpretation of objective test data: monitoring and improving the quality of high-stakes examinations--a commentary on two AMEE Guides.

PubMed

Tavakol, Mohsen; Dennick, Reg

2012-01-01

As great emphasis is rightly placed upon the importance of assessment to judge the quality of our future healthcare professionals, it is appropriate not only to choose the most appropriate assessment method, but to continually monitor the quality of the tests themselves, in a hope that we may continually improve the process. This article stresses the importance of quality control mechanisms in the exam cycle and briefly outlines some of the key psychometric concepts including reliability measures, factor analysis, generalisability theory and item response theory. The importance of such analyses for the standard setting procedures is emphasised. This article also accompanies two new AMEE Guides in Medical Education (Tavakol M, Dennick R. Post-examination Analysis of Objective Tests: AMEE Guide No. 54 and Tavakol M, Dennick R. 2012. Post examination analysis of objective test data: Monitoring and improving the quality of high stakes examinations: AMEE Guide No. 66) which provide the reader with practical examples of analysis and interpretation, in order to help develop valid and reliable tests.

Arc Jet Test and Analysis of Asbestos Free Solid Rocket Motor Nozzle Dome Ablative Materials

NASA Technical Reports Server (NTRS)

Clayton, J. Louie

2017-01-01

Asbestos free solid motor internal insulation samples were recently tested at the MSFC Hyperthermal Arc Jet Facility. Objectives of the test were to gather data for solid rocket motor analog characterization of ablative and in-depth thermal performance of rubber materials subject to high enthalpy/pressure flow conditions. Tests were conducted over a range of convective heat fluxes for both inert and chemically reactive sub-sonic free stream gas flow. Active instrumentation included use of total calorimeters, in-depth thermocouples, and a surface pyrometer for in-situ surface temperature measurement. Post-test sample forensics involved determination of eroded depth, charred depth, total sample weight loss, and documentation of the general condition of the eroded profile. A complete Charring Material Ablator (CMA) style aero thermal analysis was conducted for the test matrix and results compared to the measured data. In general, comparisons were possible for a number of the cases and the results show a limited predictive ability to model accurately both the ablative response and the in-depth temperature profiles. Lessons learned and modeling recommendations are made regarding future testing and modeling improvements that will increase understanding of the basic chemistry/physics associated with the complicated material ablation process of rubber materials.

Hepatobiliary MRI: Signal intensity based assessment of liver function correlated to 13C-Methacetin breath test.

PubMed

Haimerl, Michael; Probst, Ute; Poelsterl, Stefanie; Beyer, Lukas; Fellner, Claudia; Selgrad, Michael; Hornung, Matthias; Stroszczynski, Christian; Wiggermann, Philipp

2018-06-13

Gadoxetic acid (Gd-EOB-DTPA) is a paramagnetic MRI contrast agent with raising popularity and has been used for evaluation of imaging-based liver function in recent years. In order to verify whether liver function as determined by real-time breath analysis using the intravenous administration of 13 C-methacetin can be estimated quantitatively from Gd-EOB-DTPA-enhanced MRI using signal intensity (SI) values. 110 patients underwent Gd-EOB-DTPA-enhanced 3-T MRI and, for the evaluation of liver function, a 13 C-methacetin breath test ( 13 C-MBT). SI values from before (SI pre ) and 20 min after (SI post ) contrast media injection were acquired by T1-weighted volume-interpolated breath-hold examination (VIBE) sequences with fat suppression. The relative enhancement (RE) between the plain and contrast-enhanced SI values was calculated and evaluated in a correlation analysis of 13 C-MBT values to SI post and RE to obtain a SI-based estimation of 13 C-MBT values. The simple regression model showed a log-linear correlation of 13 C-MBT values with SI post and RE (p < 0.001). Stratified by 3 different categories of 13 C-MBT readouts, there was a constant significant decrease in both SI post (p ≤ 0.002) and RE (p ≤ 0.033) with increasing liver disease progression as assessed by the 13 C-MBT. Liver function as determined using real-time 13 C-methacetin breath analysis can be estimated quantitatively from Gd-EOB-DTPA-enhanced MRI using SI-based indices.

Stress distribution of oval and circular fiber posts in amandibular premolar: a three-dimensional finite element analysis

PubMed Central

Kilic, Kerem; Esim, Emir; Aslan, Tugrul; Kilinc, Halil Ibrahim; Yildirim, Sahin

2013-01-01

PURPOSE The aim of the present study was to evaluate the effects of posts with different morphologies on stress distribution in an endodontically treated mandibular premolar by using finite element models (FEMs). MATERIALS AND METHODS A mandibular premolar was modeled using the ANSYS software program. Two models were created to represent circular and oval fiber posts in this tooth model. An oblique force of 300 N was applied at an angle of 45° to the occlusal plane and oriented toward the buccal side. von Mises stress was measured in three regions each for oval and circular fiber posts. RESULTS FEM analysis showed that the von Mises stress of the circular fiber post (426.81 MPa) was greater than that of the oval fiber post (346.34 MPa). The maximum distribution of von Mises stress was in the luting agent in both groups. Additionally, von Mises stresses accumulated in the coronal third of root dentin, close to the post space in both groups. CONCLUSION Oval fiber posts are preferable to circular fiber posts in oval-shaped canals given the stress distribution at the post-dentin interface. PMID:24353882

Post-game analysis: An initial experiment for heuristic-based resource management in concurrent systems

NASA Technical Reports Server (NTRS)

Yan, Jerry C.

1987-01-01

In concurrent systems, a major responsibility of the resource management system is to decide how the application program is to be mapped onto the multi-processor. Instead of using abstract program and machine models, a generate-and-test framework known as 'post-game analysis' that is based on data gathered during program execution is proposed. Each iteration consists of (1) (a simulation of) an execution of the program; (2) analysis of the data gathered; and (3) the proposal of a new mapping that would have a smaller execution time. These heuristics are applied to predict execution time changes in response to small perturbations applied to the current mapping. An initial experiment was carried out using simple strategies on 'pipeline-like' applications. The results obtained from four simple strategies demonstrated that for this kind of application, even simple strategies can produce acceptable speed-up with a small number of iterations.

Deducing Electronic Unit Internal Response During a Vibration Test Using a Lumped Parameter Modeling Approach

NASA Technical Reports Server (NTRS)

Van Dyke, Michael B.

2014-01-01

During random vibration testing of electronic boxes there is often a desire to know the dynamic response of certain internal printed wiring boards (PWBs) for the purpose of monitoring the response of sensitive hardware or for post-test forensic analysis in support of anomaly investigation. Due to restrictions on internally mounted accelerometers for most flight hardware there is usually no means to empirically observe the internal dynamics of the unit, so one must resort to crude and highly uncertain approximations. One common practice is to apply Miles Equation, which does not account for the coupled response of the board in the chassis, resulting in significant over- or under-prediction. This paper explores the application of simple multiple-degree-of-freedom lumped parameter modeling to predict the coupled random vibration response of the PWBs in their fundamental modes of vibration. A simple tool using this approach could be used during or following a random vibration test to interpret vibration test data from a single external chassis measurement to deduce internal board dynamics by means of a rapid correlation analysis. Such a tool might also be useful in early design stages as a supplemental analysis to a more detailed finite element analysis to quickly prototype and analyze the dynamics of various design iterations. After developing the theoretical basis, a lumped parameter modeling approach is applied to an electronic unit for which both external and internal test vibration response measurements are available for direct comparison. Reasonable correlation of the results demonstrates the potential viability of such an approach. Further development of the preliminary approach presented in this paper will involve correlation with detailed finite element models and additional relevant test data.

The Use of Tooth Particles as a Biomaterial in Post-Extraction Sockets. Experimental Study in Dogs.

PubMed

Calvo-Guirado, José Luis; Maté-Sánchez de Val, José Eduardo; Ramos-Oltra, María Luisa; Pérez-Albacete Martínez, Carlos; Ramírez-Fernández, María Piedad; Maiquez-Gosálvez, Manuel; Gehrke, Sergio A; Fernández-Domínguez, Manuel; Romanos, Georgios E; Delgado-Ruiz, Rafael Arcesio

2018-05-06

Objectives : The objective of this study was to evaluate new bone formation derived from freshly crushed extracted teeth, grafted immediately in post-extraction sites in an animal model, compared with sites without graft filling, evaluated at 30 and 90 days. Material and Methods : The bilateral premolars P2, P3, P4 and the first mandibular molar were extracted atraumatically from six Beagle dogs. The clean, dry teeth were ground immediately using the Smart Dentin Grinder. The tooth particles obtained were subsequently sieved through a special sorting filter into two compartments; the upper container isolating particles over 1200 μm, the lower container isolated particles over 300 μm. The crushed teeth were grafted into the post-extraction sockets at P3, P4 and M1 (test group) (larger and smaller post-extraction alveoli), while P2 sites were left unfilled and acted as a control group. Tissue healing and bone formation were evaluated by histological and histomorphometric analysis after 30 and 90 days. Results : At 30 days, test site bone formation was greater in the test group than the control group ( p < 0.05); less immature bone was observed in the test group (25.71%) than the control group (55.98%). At 90 days, significant differences in bone formation were found with more in the test group than the control group. No significant differences were found in new bone formation when comparing the small and large alveoli post-extraction sites. Conclusions : Tooth particles extracted from dog’s teeth, grafted immediately after extractions can be considered a suitable biomaterial for socket preservation.

Evaluation of a low-cost, 3D-printed model for bronchoscopy training.

PubMed

Parotto, Matteo; Jiansen, Joshua Qua; AboTaiban, Ahmed; Ioukhova, Svetlana; Agzamov, Alisher; Cooper, Richard; O'Leary, Gerald; Meineri, Massimiliano

2017-01-01

Flexible bronchoscopy is a fundamental procedure in anaesthesia and critical care medicine. Although learning this procedure is a complex task, the use of simulation-based training provides significant advantages, such as enhanced patient safety. Access to bronchoscopy simulators may be limited in low-resource settings. We have developed a low-cost 3D-printed bronchoscopy training model. A parametric airway model was obtained from an online medical model repository and fabricated using a low-cost 3D printer. The participating physicians had no prior bronchoscopy experience. Participants received a 30-minute lecture on flexible bronchoscopy and were administered a 15-item pre-test questionnaire on bronchoscopy. Afterwards, participants were instructed to perform a series of predetermined bronchoscopy tasks on the 3D printed simulator on 4 consecutive occasions. The time needed to perform the tasks and the quality of task performance (identification of bronchial anatomy, technique, dexterity, lack of trauma) were recorded. Upon completion of the simulator tests, participants were administered the 15-item questionnaire (post-test) once again. Participant satisfaction data on the perceived usefulness and accuracy of the 3D model were collected. A statistical analysis was performed using the t-test. Data are reported as mean values (± standard deviation). The time needed to complete all tasks was 152.9 ± 71.5 sec on the 1st attempt vs. 98.7 ± 40.3 sec on the 4th attempt (P = 0.03). Likewise, the quality of performance score improved from 8.3 ± 6.7 to 18.2 ± 2.5 (P < 0.0001). The average number of correct answers in the questionnaire was 6.8 ± 1.9 pre-test and 13.3 ± 3.1 post-test (P < 0.0001). Participants reported a high level of satisfaction with the perceived usefulness and accuracy of the model. We developed a 3D-printed model for bronchoscopy training. This model improved trainee performance and may represent a valid, low-cost bronchoscopy training tool.

Visible implant elastomer (VIE) tagging and simulated predation risk elicit similar physiological stress responses in three-spined stickleback Gasterosteus aculeatus.

PubMed

Fürtbauer, I; King, A J; Heistermann, M

2015-05-01

The effect of visible implant elastomer (VIE) tagging on the immediate physiological stress response was tested in female three-spined stickleback Gasterosteus aculeatus, using non-invasive waterborne cortisol analysis. Post-tagging cortisol levels were significantly higher compared with pretreatment baseline concentrations; however, when comparing post-tagging cortisol levels with cortisol levels after exposure to a simulated aerial predator, no significant differences were found. This study indicates that VIE tagging elicits a physiological stress response similar to those occurring in the everyday lives of this important biological model organism. © 2015 The Fisheries Society of the British Isles.

MODELING AND ANALYSIS OF FISSION PRODUCT TRANSPORT IN THE AGR-3/4 EXPERIMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humrickhouse, Paul W.; Collin, Blaise P.; Hawkes, Grant L.

In this work we describe the ongoing modeling and analysis efforts in support of the AGR-3/4 experiment. AGR-3/4 is intended to provide data to assess fission product retention and transport (e.g., diffusion coefficients) in fuel matrix and graphite materials. We describe a set of pre-test predictions that incorporate the results of detailed thermal and fission product release models into a coupled 1D radial diffusion model of the experiment, using diffusion coefficients reported in the literature for Ag, Cs, and Sr. We make some comparisons of the predicted Cs profiles to preliminary measured data for Cs and find these to bemore » reasonable, in most cases within an order of magnitude. Our ultimate objective is to refine the diffusion coefficients using AGR-3/4 data, so we identify an analytical method for doing so and demonstrate its efficacy via a series of numerical experiments using the model predictions. Finally, we discuss development of a post-irradiation examination plan informed by the modeling effort and simulate some of the heating tests that are tentatively planned.« less

Effect of the 5E Model on Prospective Teachers' Conceptual Understanding of Diffusion and Osmosis: A Mixed Method Approach

ERIC Educational Resources Information Center

Artun, Huseyin; Costu, Bayram

2013-01-01

The aim of this study was to explore a group of prospective primary teachers' conceptual understanding of diffusion and osmosis as they implemented a 5E constructivist model and related materials in a science methods course. Fifty prospective primary teachers' ideas were elicited using a pre- and post-test and delayed post-test survey consisting…

A limited sampling model for estimation of total and unbound mycophenolic acid (MPA) area under the curve (AUC) in hematopoietic cell transplantation (HCT).

PubMed

Ng, Juki; Rogosheske, John; Barker, Juliet; Weisdorf, Daniel; Jacobson, Pamala A

2006-06-01

Renal transplant patients with suboptimal mycophenolic acid (MPA) areas under the curves (AUCs) are at greater risk of acute rejection. In hematopoietic cell transplantation, a low MPA AUC is also associated with a higher incidence of acute graft versus host disease. Therefore, a limited sampling model was developed and validated to simultaneously estimate total and unbound MPA AUC0-12 in hematopoietic cell transplantation patients. Intensive pharmacokinetic sampling was performed at steady state between days 3 to 7 posttransplant in 73 adult subjects while receiving prophylactic mycophenolate mofetil 1 g per 12 hours orally or intravenously plus cyclosporine. Total and unbound MPA plasma concentrations were measured, and total and unbound AUC0-12 was determined using noncompartmental analysis. Regression analysis was then performed to build IV and PO, total and unbound AUC0-12 models from the first 34 subjects. The predictive performance of these models was tested in the next 39 subjects. Trough concentrations poorly estimate observed total and unbound AUC0-12 (r<0.48). A model with 3 concentrations (2-, 4-, and 6-hour post start of infusion) best estimated observed total and unbound AUC0-12 after IV dosing (r>0.99). Oral total and unbound AUC0-12 was more difficult to estimate and required at least 4 concentrations (0-, 1-, 2-, and 6-hour post dose) in the model (r>0.85). The predictive performance of the final models was good. Eighty-three percent of IV and 70% of PO AUC0-12 predictions fell within +/-20% of the observed values without significant bias. Trough MPA concentrations do not accurately describe MPA AUC0-12. Three intravenous (2-, 4-, 6-hour post start of infusion) or 4 oral (0-, 1-, 2-, and 6-hour post dose) MPA plasma concentrations measured over a 12-hour dosing interval will estimate the total and unbound AUC0-12 nearly as well as intensive pharmacokinetic sampling with good precision and low bias. This approach simplifies AUC0-12 targeting of MPA post hematopoietic cell transplantation.

Pre/Post Data Analysis - Simple or Is It?

NASA Technical Reports Server (NTRS)

Feiveson, Al; Fiedler, James; Ploutz-Snyder, Robert

2011-01-01

This slide presentation reviews some of the problems of data analysis in analyzing pre and post data. Using as an example, ankle extensor strength (AES) experiments, to measure bone density loss during bed rest, the presentation discusses several questions: (1) How should we describe change? (2) Common analysis methods for comparing post to pre results. (3) What do we mean by "% change"? and (4) What are we testing when we compare % changes?

Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: The effect of layer penetration and post-heating.

PubMed

Naghieh, S; Karamooz Ravari, M R; Badrossamay, M; Foroozmehr, E; Kadkhodaei, M

2016-06-01

In recent years, thanks to additive manufacturing technology, researchers have gone towards the optimization of bone scaffolds for the bone reconstruction. Bone scaffolds should have appropriate biological as well as mechanical properties in order to play a decisive role in bone healing. Since the fabrication of scaffolds is time consuming and expensive, numerical methods are often utilized to simulate their mechanical properties in order to find a nearly optimum one. Finite element analysis is one of the most common numerical methods that is used in this regard. In this paper, a parametric finite element model is developed to assess the effects of layers penetration׳s effect on inter-layer adhesion, which is reflected on the mechanical properties of bone scaffolds. To be able to validate this model, some compression test specimens as well as bone scaffolds are fabricated with biocompatible and biodegradable poly lactic acid using fused deposition modeling. All these specimens are tested in compression and their elastic modulus is obtained. Using the material parameters of the compression test specimens, the finite element analysis of the bone scaffold is performed. The obtained elastic modulus is compared with experiment indicating a good agreement. Accordingly, the proposed finite element model is able to predict the mechanical behavior of fabricated bone scaffolds accurately. In addition, the effect of post-heating of bone scaffolds on their elastic modulus is investigated. The results demonstrate that the numerically predicted elastic modulus of scaffold is closer to experimental outcomes in comparison with as-built samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

Entropy Generation/Availability Energy Loss Analysis Inside MIT Gas Spring and "Two Space" Test Rigs

NASA Technical Reports Server (NTRS)

Ebiana, Asuquo B.; Savadekar, Rupesh T.; Patel, Kaushal V.

2006-01-01

The results of the entropy generation and availability energy loss analysis under conditions of oscillating pressure and oscillating helium gas flow in two Massachusetts Institute of Technology (MIT) test rigs piston-cylinder and piston-cylinder-heat exchanger are presented. Two solution domains, the gas spring (single-space) in the piston-cylinder test rig and the gas spring + heat exchanger (two-space) in the piston-cylinder-heat exchanger test rig are of interest. Sage and CFD-ACE+ commercial numerical codes are used to obtain 1-D and 2-D computer models, respectively, of each of the two solution domains and to simulate the oscillating gas flow and heat transfer effects in these domains. Second law analysis is used to characterize the entropy generation and availability energy losses inside the two solution domains. Internal and external entropy generation and availability energy loss results predicted by Sage and CFD-ACE+ are compared. Thermodynamic loss analysis of simple systems such as the MIT test rigs are often useful to understand some important features of complex pattern forming processes in more complex systems like the Stirling engine. This study is aimed at improving numerical codes for the prediction of thermodynamic losses via the development of a loss post-processor. The incorporation of loss post-processors in Stirling engine numerical codes will facilitate Stirling engine performance optimization. Loss analysis using entropy-generation rates due to heat and fluid flow is a relatively new technique for assessing component performance. It offers a deep insight into the flow phenomena, allows a more exact calculation of losses than is possible with traditional means involving the application of loss correlations and provides an effective tool for improving component and overall system performance.

[Companion diagnostics in the era of personalized medicine--chairmen's introductory remarks].

PubMed

Fukutsuka, Katsuhiro; Takubo, Takayuki

2014-04-01

Personalized medicine is a medical model that proposes the customization of treatment for individual patients. In this model, diagnostic tests are essential for selecting safer and more efficacious treatments. The term "companion diagnostics" has been used to describe these tests, whereby molecular assays that measure the levels of proteins or specific gene mutations are used to provide a specific therapy for an individual by stratifying the disease status, selecting the proper medication, and tailoring dosages. Examples of companion diagnostics in the field of cancer medicine for molecular targeted therapy include tests for the ALK-fusion gene in non-small cell lung cancer and expression of CCR4 in adult T-cell leukemia. For breast cancer, the expression of HER2 protein is evaluated by immunohistochemistry (IHC), and gene amplification of HER2 is tested by fluorescence in situ hybridization (FISH); both tests consist of pre-analysis, analysis, and post-analysis processes that require quality control to ensure the reliability of the results. This symposium includes: 1) future aspects of companion diagnostics addressing many of the problems that must be overcome, 2) companion diagnostics using FISH focusing on HER2 amplification and ALK alteration, 3) newly developed diagnostic tests using tumor specimens and cell-free DNA in serum, and 4) CCR4 expression detected by IHC and flow cytometry.

A pilot study: the development of a culturally tailored Malaysian Diabetes Education Module (MY-DEMO) based on the Health Belief Model.

PubMed

Ahmad, Badariah; Ramadas, Amutha; Kia Fatt, Quek; Md Zain, Anuar Zaini

2014-04-08

Diabetes education and self-care remains the cornerstone of diabetes management. There are many structured diabetes modules available in the United Kingdom, Europe and United States of America. Contrastingly, few structured and validated diabetes modules are available in Malaysia. This pilot study aims to develop and validate diabetes education material suitable and tailored for a multicultural society like Malaysia. The theoretical framework of this module was founded from the Health Belief Model (HBM). The participants were assessed using 6-item pre- and post-test questionnaires that measured some of the known HBM constructs namely cues to action, perceived severity and perceived benefit. Data was analysed using PASW Statistics 18.0. The pre- and post-test questionnaires were administered to 88 participants (31 males). In general, there was a significant increase in the total score in post-test (97.34 ± 6.13%) compared to pre-test (92.80 ± 12.83%) (p < 0.05) and a significant increase in excellent score (>85%) at post-test (84.1%) compared to pre-test (70.5%) (p < 0.05). There was an improvement in post-test score in 4 of 6 items tested. The remaining 2 items which measured the perceived severity and cues to action had poorer post-test score. The preliminary results from this pilot study suggest contextualised content material embedded within MY DEMO maybe suitable for integration with the existing diabetes education programmes. This was the first known validated diabetes education programme available in the Malay language.

Pharmacological and Behavioral Enhancement of Neuroplasticity in the MPTP Lesioned Mouse and Nonhuman Primate

DTIC Science & Technology

2007-05-01

and post - synaptic dopamine biosynthesis, uptake and receptor expression as well as glutamatergic synapses. This hypothesis will be tested through...0.05) compared to mice at 7 days (9.6 ± 3.2%) or 30 days post -MPTP (16.5 ± 7.3%). The tail suspension test showed a significant increase in percent of...were compared using one-way analysis of variance (ANOVA), followed by the Fisher post hoc test for comparison of multiple means for the following

An SEM Approach for the Evaluation of Intervention Effects Using Pre-Post-Post Designs

ERIC Educational Resources Information Center

Mun, Eun Young; von Eye, Alexander; White, Helene R.

2009-01-01

This study analyzes latent change scores using latent curve models (LCMs) for evaluation research with pre-post-post designs. The article extends a recent article by Willoughby, Vandergrift, Blair, and Granger (2007) on the use of LCMs for studies with pre-post-post designs, and demonstrates that intervention effects can be better tested using…

Survival Prediction in Pancreatic Ductal Adenocarcinoma by Quantitative Computed Tomography Image Analysis.

PubMed

Attiyeh, Marc A; Chakraborty, Jayasree; Doussot, Alexandre; Langdon-Embry, Liana; Mainarich, Shiana; Gönen, Mithat; Balachandran, Vinod P; D'Angelica, Michael I; DeMatteo, Ronald P; Jarnagin, William R; Kingham, T Peter; Allen, Peter J; Simpson, Amber L; Do, Richard K

2018-04-01

Pancreatic cancer is a highly lethal cancer with no established a priori markers of survival. Existing nomograms rely mainly on post-resection data and are of limited utility in directing surgical management. This study investigated the use of quantitative computed tomography (CT) features to preoperatively assess survival for pancreatic ductal adenocarcinoma (PDAC) patients. A prospectively maintained database identified consecutive chemotherapy-naive patients with CT angiography and resected PDAC between 2009 and 2012. Variation in CT enhancement patterns was extracted from the tumor region using texture analysis, a quantitative image analysis tool previously described in the literature. Two continuous survival models were constructed, with 70% of the data (training set) using Cox regression, first based only on preoperative serum cancer antigen (CA) 19-9 levels and image features (model A), and then on CA19-9, image features, and the Brennan score (composite pathology score; model B). The remaining 30% of the data (test set) were reserved for independent validation. A total of 161 patients were included in the analysis. Training and test sets contained 113 and 48 patients, respectively. Quantitative image features combined with CA19-9 achieved a c-index of 0.69 [integrated Brier score (IBS) 0.224] on the test data, while combining CA19-9, imaging, and the Brennan score achieved a c-index of 0.74 (IBS 0.200) on the test data. We present two continuous survival prediction models for resected PDAC patients. Quantitative analysis of CT texture features is associated with overall survival. Further work includes applying the model to an external dataset to increase the sample size for training and to determine its applicability.

Fem and Experimental Analysis of Thin-Walled Composite Elements Under Compression

NASA Astrophysics Data System (ADS)

Różyło, P.; Wysmulski, P.; Falkowicz, K.

2017-05-01

Thin-walled steel elements in the form of openwork columns with variable geometrical parameters of holes were studied. The samples of thin-walled composite columns were modelled numerically. They were subjected to axial compression to examine their behavior in the critical and post-critical state. The numerical models were articulately supported on the upper and lower edges of the cross-section of the profiles. The numerical analysis was conducted only with respect to the non-linear stability of the structure. The FEM analysis was performed until the material achieved its yield stress. This was done to force the loss of stability by the structures. The numerical analysis was performed using the ABAQUS® software. The numerical analysis was performed only for the elastic range to ensure the operating stability of the tested thin-walled structures.

Earth observation data based rapid flood-extent modelling for tsunami-devastated coastal areas

NASA Astrophysics Data System (ADS)

Hese, Sören; Heyer, Thomas

2016-04-01

Earth observation (EO)-based mapping and analysis of natural hazards plays a critical role in various aspects of post-disaster aid management. Spatial very high-resolution Earth observation data provide important information for managing post-tsunami activities on devastated land and monitoring re-cultivation and reconstruction. The automatic and fast use of high-resolution EO data for rapid mapping is, however, complicated by high spectral variability in densely populated urban areas and unpredictable textural and spectral land-surface changes. The present paper presents the results of the SENDAI project, which developed an automatic post-tsunami flood-extent modelling concept using RapidEye multispectral satellite data and ASTER Global Digital Elevation Model Version 2 (GDEM V2) data of the eastern coast of Japan (captured after the Tohoku earthquake). In this paper, the authors developed both a bathtub-modelling approach and a cost-distance approach, and integrated the roughness parameters of different land-use types to increase the accuracy of flood-extent modelling. Overall, the accuracy of the developed models reached 87-92%, depending on the analysed test site. The flood-modelling approach was explained and results were compared with published approaches. We came to the conclusion that the cost-factor-based approach reaches accuracy comparable to published results from hydrological modelling. However the proposed cost-factor approach is based on a much simpler dataset, which is available globally.

Huygens probe entry, descent, and landing trajectory reconstruction using the Program to Optimize Simulated Trajectories II

NASA Astrophysics Data System (ADS)

Striepe, Scott Allen

The objectives of this research were to develop a reconstruction capability using the Program to Optimize Simulated Trajectories II (POST2), apply this capability to reconstruct the Huygens Titan probe entry, descent, and landing (EDL) trajectory, evaluate the newly developed POST2 reconstruction module, analyze the reconstructed trajectory, and assess the pre-flight simulation models used for Huygens EDL simulation. An extended Kalman filter (EKF) module was developed and integrated into POST2 to enable trajectory reconstruction (especially when using POST2-based mission specific simulations). Several validation cases, ranging from a single, constant parameter estimate to multivariable estimation cases similar to an actual mission flight, were executed to test the POST2 reconstruction module. Trajectory reconstruction of the Huygens entry probe at Titan was accomplished using accelerometer measurements taken during flight to adjust an estimated state (e.g., position, velocity, parachute drag, wind velocity, etc.) in a POST2-based simulation developed to support EDL analyses and design prior to entry. Although the main emphasis of the trajectory reconstruction was to evaluate models used in the NASA pre-entry trajectory simulation, the resulting reconstructed trajectory was also assessed to provide an independent evaluation of the ESA result. Major findings from this analysis include: Altitude profiles from this analysis agree well with other NASA and ESA results but not with Radar data, whereas a scale factor of about 0.93 would bring the radar measurements into compliance with these results; entry capsule aerodynamics predictions (axial component only) were well within 3-sigma bounds established pre-flight for most of the entry when compared to reconstructed values; Main parachute drag of 9% to 19% above ESA model was determined from the reconstructed trajectory; based on the tilt sensor and accelerometer data, the conclusion from this assessment was that the probe was tilted about 10 degrees during the Drogue parachute phase.

Modifying high-order aeroelastic math model of a jet transport using maximum likelihood estimation

NASA Technical Reports Server (NTRS)

Anissipour, Amir A.; Benson, Russell A.

1989-01-01

The design of control laws to damp flexible structural modes requires accurate math models. Unlike the design of control laws for rigid body motion (e.g., where robust control is used to compensate for modeling inaccuracies), structural mode damping usually employs narrow band notch filters. In order to obtain the required accuracy in the math model, maximum likelihood estimation technique is employed to improve the accuracy of the math model using flight data. Presented here are all phases of this methodology: (1) pre-flight analysis (i.e., optimal input signal design for flight test, sensor location determination, model reduction technique, etc.), (2) data collection and preprocessing, and (3) post-flight analysis (i.e., estimation technique and model verification). In addition, a discussion is presented of the software tools used and the need for future study in this field.

Genetic Modeling of Radiation Injury in Prostate Cancer Patients Treated with Radiotherapy

DTIC Science & Technology

2017-10-01

approaches in the GWAS meta-analysis: 1) logistic regression to test association of each SNP with grade 1 or worse toxicity at 2 years post ...Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 DISTRIBUTION STATEMENT: Approved for...Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION / AVAILABILITY

40 CFR 89.411 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and the values recorded. The number of events that may occur between the pre- and post-analysis checks... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... Emission Test Procedures § 89.411 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 89.411 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and the values recorded. The number of events that may occur between the pre- and post-analysis checks... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... Emission Test Procedures § 89.411 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 89.411 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and the values recorded. The number of events that may occur between the pre- and post-analysis checks... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... Emission Test Procedures § 89.411 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 86.1340-90 - Exhaust sample analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... may occur between the pre and post checks is not specified. However, the difference between pre... pre-analysis and post-analysis checks on any range used may exceed 3 percent for HC, or 2 percent for... Regulations for New Otto-Cycle and Diesel Heavy-Duty Engines; Gaseous and Particulate Exhaust Test Procedures...

40 CFR 86.1340-90 - Exhaust sample analysis.

Code of Federal Regulations, 2013 CFR

2013-07-01

... may occur between the pre and post checks is not specified. However, the difference between pre... pre-analysis and post-analysis checks on any range used may exceed 3 percent for HC, or 2 percent for... Regulations for New Otto-Cycle and Diesel Heavy-Duty Engines; Gaseous and Particulate Exhaust Test Procedures...

40 CFR 86.1340-90 - Exhaust sample analysis.

Code of Federal Regulations, 2012 CFR

2012-07-01

... may occur between the pre and post checks is not specified. However, the difference between pre... pre-analysis and post-analysis checks on any range used may exceed 3 percent for HC, or 2 percent for... Regulations for New Otto-Cycle and Diesel Heavy-Duty Engines; Gaseous and Particulate Exhaust Test Procedures...

40 CFR 89.411 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and the values recorded. The number of events that may occur between the pre- and post-analysis checks... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... Emission Test Procedures § 89.411 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 89.411 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and the values recorded. The number of events that may occur between the pre- and post-analysis checks... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... Emission Test Procedures § 89.411 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 86.1340-90 - Exhaust sample analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... may occur between the pre and post checks is not specified. However, the difference between pre... pre-analysis and post-analysis checks on any range used may exceed 3 percent for HC, or 2 percent for... Regulations for New Otto-Cycle and Diesel Heavy-Duty Engines; Gaseous and Particulate Exhaust Test Procedures...

Gradient-based model calibration with proxy-model assistance

NASA Astrophysics Data System (ADS)

Burrows, Wesley; Doherty, John

2016-02-01

Use of a proxy model in gradient-based calibration and uncertainty analysis of a complex groundwater model with large run times and problematic numerical behaviour is described. The methodology is general, and can be used with models of all types. The proxy model is based on a series of analytical functions that link all model outputs used in the calibration process to all parameters requiring estimation. In enforcing history-matching constraints during the calibration and post-calibration uncertainty analysis processes, the proxy model is run for the purposes of populating the Jacobian matrix, while the original model is run when testing parameter upgrades; the latter process is readily parallelized. Use of a proxy model in this fashion dramatically reduces the computational burden of complex model calibration and uncertainty analysis. At the same time, the effect of model numerical misbehaviour on calculation of local gradients is mitigated, this allowing access to the benefits of gradient-based analysis where lack of integrity in finite-difference derivatives calculation would otherwise have impeded such access. Construction of a proxy model, and its subsequent use in calibration of a complex model, and in analysing the uncertainties of predictions made by that model, is implemented in the PEST suite.

Post-Test Inspection of NASA's Evolutionary Xenon Thruster Long-Duration Test Hardware: Discharge and Neutralizer Cathodes

NASA Technical Reports Server (NTRS)

Shastry, Rohit; Soulas, George C.

2016-01-01

The NEXT Long-Duration Test is part of a comprehensive thruster service life assessment intended to demonstrate overall throughput capability, validate service life models, quantify wear rates as a function of time and operating condition, and identify any unknown life-limiting mechanisms. The test was voluntarily terminated in February 2014 after demonstrating 51,184 hours of high-voltage operation, 918 kg of propellant throughput, and 35.5 MN-s of total impulse. The post-test inspection of the thruster hardware began shortly afterwards with a combination of non-destructive and destructive analysis techniques, and is presently nearing completion. This paper presents relevant results of the post-test inspection for both discharge and neutralizer cathodes. Discharge keeper erosion was found to be significantly reduced from what was observed in the NEXT 2 kh wear test and NSTAR Extended Life Test, providing adequate protection of vital cathode components throughout the test with ample lifetime remaining. The area of the discharge cathode orifice plate that was exposed by the keeper orifice exhibited net erosion, leading to cathode plate material building up in the cathode-keeper gap and causing a thermally-induced electrical short observed during the test. Significant erosion of the neutralizer cathode orifice was also found and is believed to be the root cause of an observed loss in flow margin. Deposition within the neutralizer keeper orifice as well as on the downstream surface was thicker than expected, potentially resulting in a facility-induced impact on the measured flow margin from plume mode. Neutralizer keeper wall erosion on the beam side was found to be significantly lower compared to the NEXT 2 kh wear test, likely due to the reduction in beam extraction diameter of the ion optics that resulted in decreased ion impingement. Results from the post-test inspection have led to some minor thruster design improvements.

Unstalled flutter stability predictions and comparisons to test data for a composite prop-fan model

NASA Technical Reports Server (NTRS)

Turnberg, J. E.

1986-01-01

The aeroelastic stability analyses for three graphite/epoxy composite Prop-Fan designs and post-test stability analysis for one of the designs, the SR-3C-X2 are presented. It was shown that Prop-Fan stability can be effectively analyzed using the F203 modal aeroelastic stability analysis developed at Hamilton Standard and that first mode torsion-bending coupling has a direct effect on blade stability. Positive first mode torsion-bending coupling is a destabilizing factor and the minimization of this parameter will increase Prop-Fan stability. It was also shown that Prop-Fan stability analysis using F203 is sensitive to the blade modal data used as input. Calculated blade modal properties varied significantly with the structural analysis used, and these variations are reflected in the F203 calculations.

Patient-Specific MRI-Based Right Ventricle Models Using Different Zero-Load Diastole and Systole Geometries for Better Cardiac Stress and Strain Calculations and Pulmonary Valve Replacement Surgical Outcome Predictions.

PubMed

Tang, Dalin; Del Nido, Pedro J; Yang, Chun; Zuo, Heng; Huang, Xueying; Rathod, Rahul H; Gooty, Vasu; Tang, Alexander; Wu, Zheyang; Billiar, Kristen L; Geva, Tal

2016-01-01

Accurate calculation of ventricular stress and strain is critical for cardiovascular investigations. Sarcomere shortening in active contraction leads to change of ventricular zero-stress configurations during the cardiac cycle. A new model using different zero-load diastole and systole geometries was introduced to provide more accurate cardiac stress/strain calculations with potential to predict post pulmonary valve replacement (PVR) surgical outcome. Cardiac magnetic resonance (CMR) data were obtained from 16 patients with repaired tetralogy of Fallot prior to and 6 months after pulmonary valve replacement (8 male, 8 female, mean age 34.5 years). Patients were divided into Group 1 (n = 8) with better post PVR outcome and Group 2 (n = 8) with worse post PVR outcome based on their change in RV ejection fraction (EF). CMR-based patient-specific computational RV/LV models using one zero-load geometry (1G model) and two zero-load geometries (diastole and systole, 2G model) were constructed and RV wall thickness, volume, circumferential and longitudinal curvatures, mechanical stress and strain were obtained for analysis. Pairwise T-test and Linear Mixed Effect (LME) model were used to determine if the differences from the 1G and 2G models were statistically significant, with the dependence of the pair-wise observations and the patient-slice clustering effects being taken into consideration. For group comparisons, continuous variables (RV volumes, WT, C- and L- curvatures, and stress and strain values) were summarized as mean ± SD and compared between the outcome groups by using an unpaired Student t-test. Logistic regression analysis was used to identify potential morphological and mechanical predictors for post PVR surgical outcome. Based on results from the 16 patients, mean begin-ejection stress and strain from the 2G model were 28% and 40% higher than that from the 1G model, respectively. Using the 2G model results, RV EF changes correlated negatively with stress (r = -0.609, P = 0.012) and with pre-PVR RV end-diastole volume (r = -0.60, P = 0.015), but did not correlate with WT, C-curvature, L-curvature, or strain. At begin-ejection, mean RV stress of Group 2 was 57.4% higher than that of Group 1 (130.1±60.7 vs. 82.7±38.8 kPa, P = 0.0042). Stress was the only parameter that showed significant differences between the two groups. The combination of circumferential curvature, RV volume and the difference between begin-ejection stress and end-ejection stress was the best predictor for post PVR outcome with an area under the ROC curve of 0.855. The begin-ejection stress was the best single predictor among the 8 individual parameters with an area under the ROC curve of 0.782. The new 2G model may be able to provide more accurate ventricular stress and strain calculations for potential clinical applications. Combining morphological and mechanical parameters may provide better predictions for post PVR outcome.

Investigating the use of small-diameter softwood as guardrail posts (dynamic test results)

Treesearch

Jason A. Hascall; John D. Reid; Ronald K. Faller; Dean L. Sicking; David E. Kretschmann

2007-01-01

A modified version of the Midwest Guardrail System (MGS), utilizing small-diameter round wood posts, was developed, tested, and evaluated. Three systems were developed using different species of timber, Douglas Fir, Ponderosa Pine, and Southern Yellow Pine. A combination of Barrier VII computer simulation modeling and several series of cantilever bogie tests, conducted...

Rigidity and retention of ceramic root canal posts.

PubMed

Purton, D G; Love, R M; Chandler, N P

2000-01-01

Ceramic root-canal posts offer potential advantages over other types with respect to aesthetics and biocompatibility. Any post must be sufficiently rigid and retentive to withstand functional forces. Ceraposts (1.2 mm coronal diameter, ceramic, tapering, smooth posts) and Paraposts (1.25 mm, stainless-steel, parallel, serrated posts) were tested for rigidity by means of a three-point bending test. To test retention in roots, ceramic posts were cemented using one of three protocols: (1) glass-ionomer cement, (2) silane coupling agent and resin cement, or (3) sandblasted post surface, silane coupling agent, and resin cement. Stainless-steel posts were cemented with resin. The tensile force required to dislodge the posts, following four weeks of storage in water, was recorded. Data were compared using Student's t-test and Mann-Whitney U analysis. Ceraposts were significantly more rigid than Paraposts (p < 0.001). Paraposts cemented with resin were significantly more strongly retained than Ceraposts following any cementation protocol (p < 0.001). Retention of the ceramic posts was significantly greater with a silane coupling agent and resin cement than with glass-ionomer cement (p < 0.001). Sandblasting the ceramic posts produced variable results and needs further investigation before it could be recommended.

Land surface temperature as potential indicator of burn severity in forest Mediterranean ecosystems

NASA Astrophysics Data System (ADS)

Quintano, C.; Fernández-Manso, A.; Calvo, L.; Marcos, E.; Valbuena, L.

2015-04-01

Forest fires are one of the most important causes of environmental alteration in Mediterranean countries. Discrimination of different degrees of burn severity is critical for improving management of fire-affected areas. This paper aims to evaluate the usefulness of land surface temperature (LST) as potential indicator of burn severity. We used a large convention-dominated wildfire, which occurred on 19-21 September, 2012 in Northwestern Spain. From this area, a 1-year series of six LST images were generated from Landsat 7 Enhanced Thematic Mapper (ETM+) data using a single channel algorithm. Further, the Composite Burn Index (CBI) was measured in 111 field plots to identify the burn severity level (low, moderate, and high). Evaluation of the potential relationship between post-fire LST and ground measured CBI was performed by both correlation analysis and regression models. Correlation coefficients were higher in the immediate post-fire LST images, but decreased during the fall of 2012 and increased again with a second maximum value in summer, 2013. A linear regression model between post-fire LST and CBI allowed us to represent spatially predicted CBI (R-squaredadj > 85%). After performing an analysis of variance (ANOVA) between post-fire LST and CBI, a Fisher's least significant difference test determined that two burn severity levels (low-moderate and high) could be statistically distinguished. The identification of such burn severity levels is sufficient and useful to forest managers. We conclude that summer post-fire LST from moderate resolution satellite data may be considered as a valuable indicator of burn severity for large fires in Mediterranean forest ecosytems.

Yield Behavior of Solution Treated and Aged Ti-6Al-4V

NASA Technical Reports Server (NTRS)

Ring, Andrew J.; Baker, Eric H.; Salem, Jonathan A.; Thesken, John C.

2014-01-01

Post yield uniaxial tension-compression tests were run on a solution treated and aged (STA), titanium 6-percent aluminum 4-percent vanadium (Ti-6Al-4V) alloy to determine the yield behavior on load reversal. The material exhibits plastic behavior almost immediately on load reversal implying a strong Bauschinger effect. The resultant stress-strain data was compared to a 1D mechanics model and a finite element model used to design a composite overwrapped pressure vessel (COPV). Although the models and experimental data compare well for the initial loading and unloading in the tensile regime, agreement is lost in the compressive regime due to the Bauschinger effect and the assumption of perfect plasticity. The test data presented here are being used to develop more accurate cyclic hardening constitutive models for future finite element design analysis of COPVs.

Development of an objective gene expression panel as an alternative to self-reported symptom scores in human influenza challenge trials.

PubMed

Muller, Julius; Parizotto, Eneida; Antrobus, Richard; Francis, James; Bunce, Campbell; Stranks, Amanda; Nichols, Marshall; McClain, Micah; Hill, Adrian V S; Ramasamy, Adaikalavan; Gilbert, Sarah C

2017-06-08

Influenza challenge trials are important for vaccine efficacy testing. Currently, disease severity is determined by self-reported scores to a list of symptoms which can be highly subjective. A more objective measure would allow for improved data analysis. Twenty-one volunteers participated in an influenza challenge trial. We calculated the daily sum of scores (DSS) for a list of 16 influenza symptoms. Whole blood collected at baseline and 24, 48, 72 and 96 h post challenge was profiled on Illumina HT12v4 microarrays. Changes in gene expression most strongly correlated with DSS were selected to train a Random Forest model and tested on two independent test sets consisting of 41 individuals profiled on a different microarray platform and 33 volunteers assayed by qRT-PCR. 1456 probes are significantly associated with DSS at 1% false discovery rate. We selected 19 genes with the largest fold change to train a random forest model. We observed good concordance between predicted and actual scores in the first test set (r = 0.57; RMSE = -16.1%) with the greatest agreement achieved on samples collected approximately 72 h post challenge. Therefore, we assayed samples collected at baseline and 72 h post challenge in the second test set by qRT-PCR and observed good concordance (r = 0.81; RMSE = -36.1%). We developed a 19-gene qRT-PCR panel to predict DSS, validated on two independent datasets. A transcriptomics based panel could provide a more objective measure of symptom scoring in future influenza challenge studies. Trial registration Samples were obtained from a clinical trial with the ClinicalTrials.gov Identifier: NCT02014870, first registered on December 5, 2013.

A Teaching Model for Scaffolding 4th Grade Students' Scientific Explanation Writing

NASA Astrophysics Data System (ADS)

Yang, Hsiu-Ting; Wang, Kuo-Hua

2014-08-01

Improving students scientific explanations is one major goal of science education. Both writing activities and concept mapping are reported as effective strategies for enhancing student learning of science. The purpose of this study was to examine the effect of a teaching model, named the DCI model, which integrates a Descriptive explanation writing activity, Concept mapping, and an Interpretive explanation writing activity, is introduced in a 4th grade science class to see if it would improve students' scientific explanations and understanding. A quasi-experimental design, including a non-randomized comparison group and a pre- and post-test design, was adopted for this study. An experimental group of 25 students were taught using the DCI teaching model, while a comparison group received a traditional lecture teaching. A rubric and content analysis was used to assess students' scientific explanations. The independent sample t test was used to measure difference in conceptual understanding between the two groups, before and after instruction. Then, the paired t test analysis was used to understand the promotion of the DCI teaching model. The results showed that students in the experimental group performed better than students in the comparison group, both in scientific concept understanding and explanation. Suggestions for using concept mapping and writing activities (the DCI teaching model) in science classes are provided in this study.

A study to compare traditional and constructivism-based instruction of a high school biology unit on biosystematics

NASA Astrophysics Data System (ADS)

Saigo, Barbara Woodworth

The researcher collaborated with four high school biology teachers who had been involved for 2-1/2 years in a constructivism-based professional development experience that emphasized teaching for conceptual change and using classroom-based inquiry as a basis for making instructional decisions. The researcher and teachers designed a five-day instructional unit on biosystematics using two contrasting approaches, comprising the treatment variable. The "traditional" unit emphasized lecture, written materials, and some laboratory activities. The "constructivist" unit emphasized a specific, inquiry-based, conceptual change strategy and collaborative learning. The study used a quasi-experimental, factorial design to explore impact of instructional approach (the treatment variable) on student performance (the dependent variable) on repeated measures (three) of a biology concept test. Additional independent variables considered were gender, cumulative GPA, and the section in which students were enrolled. Scores on the biology concept test were compiled for the 3 constructivist sections (N = 44) and the 3 traditional sections (N = 42). Analysis of Covariance (ANCOVA) was applied. The main findings in regard to the primary research question were that instructional approach did not have a significant relationship to immediate post test scores or gain, but that one month after instruction students in the constructivist group demonstrated less loss of gain than those in the traditional group; i.e., their longer-term retention was greater. Also, GPA*instructional approach effects were detected for post-post-test gain. GPA and gender were significantly associated with pre-test, post-test, and post-post scores; however, in terms of change (gain) from pre-test to post-test and pre-test to post-post-test, GPA and gender were not significant effects. Section was a significant effect for all three tests, in terms of both score and gain. Gender*section effects were detected for post-test gain and post-post-test scores.

The importance of explicitly mapping instructional analogies in science education

NASA Astrophysics Data System (ADS)

Asay, Loretta Johnson

Analogies are ubiquitous during instruction in science classrooms, yet research about the effectiveness of using analogies has produced mixed results. An aspect seldom studied is a model of instruction when using analogies. The few existing models for instruction with analogies have not often been examined quantitatively. The Teaching With Analogies (TWA) model (Glynn, 1991) is one of the models frequently cited in the variety of research about analogies. The TWA model outlines steps for instruction, including the step of explicitly mapping the features of the source to the target. An experimental study was conducted to examine the effects of explicitly mapping the features of the source and target in an analogy during computer-based instruction about electrical circuits. Explicit mapping was compared to no mapping and to a control with no analogy. Participants were ninth- and tenth-grade biology students who were each randomly assigned to one of three conditions (no analogy module, analogy module, or explicitly mapped analogy module) for computer-based instruction. Subjects took a pre-test before the instruction, which was used to assign them to a level of previous knowledge about electrical circuits for analysis of any differential effects. After the instruction modules, students took a post-test about electrical circuits. Two weeks later, they took a delayed post-test. No advantage was found for explicitly mapping the analogy. Learning patterns were the same, regardless of the type of instruction. Those who knew the least about electrical circuits, based on the pre-test, made the most gains. After the two-week delay, this group maintained the largest amount of their gain. Implications exist for science education classrooms, as analogy use should be based on research about effective practices. Further studies are suggested to foster the building of research-based models for classroom instruction with analogies.

Setting apart the affected: the use of behavioral criteria in animal models of post traumatic stress disorder.

PubMed

Cohen, Hagit; Zohar, Joseph; Matar, Michael A; Zeev, Kaplan; Loewenthal, Uri; Richter-Levin, Gal

2004-11-01

Post-traumatic stress disorder (PTSD) affects about 20-30% of exposed individuals. Clinical studies of PTSD generally employ stringent criteria for inclusion in study populations, and yet in animal studies the data collection and analysis are generally expressed as a function of exposed vs nonexposed populations, regardless of individual variation in response. Prior data support an approach to animal models analogous to inclusion criteria in clinical studies. This series of studies sought to assess prevalence rates of maladaptive vs adaptive responses determined according to a more stringent approach to the concept of inclusion/exclusion criteria (cutoff behavioral criteria-CBC), consisting of two successive behavioral tests (elevated plus maze and acoustic startle response tests). The rats were exposed to stressors in two different paradigms; exposure to a predator and underwater trauma. The prevalence rates of maladaptive responses to stress in these two distinct models dropped over time from 90% in the acute phase to 25% enduring/maladaptive response at 7 days, to remain constant over 30 days. As setting the affected individuals apart from the unaffected approximates clinical studies, it might also help to clarify some of the pending issues in PTSD research.

Avoiding drift related to linear analysis update with Lagrangian coordinate models

NASA Astrophysics Data System (ADS)

Wang, Yiguo; Counillon, Francois; Bertino, Laurent

2015-04-01

When applying data assimilation to Lagrangian coordinate models, it is profitable to correct its grid (position, volume). In isopycnal ocean coordinate model, such information is provided by the layer thickness that can be massless but must remains positive (truncated Gaussian distribution). A linear gaussian analysis does not ensure positivity for such variable. Existing methods have been proposed to handle this issue - e.g. post processing, anamorphosis or resampling - but none ensures conservation of the mean, which is imperative in climate application. Here, a framework is introduced to test a new method, which proceed as following. First, layers for which analysis yields negative values are iteratively grouped with neighboring layers, resulting in a probability density function with a larger mean and smaller standard deviation that prevent appearance of negative values. Second, analysis increments of the grouped layer are uniformly distributed, which prevent massless layers to become filled and vice-versa. The new method is proved fully conservative with e.g. OI or 3DVAR but a small drift remains with ensemble-based methods (e.g. EnKF, DEnKF, …) during the update of the ensemble anomaly. However, the resulting drift with the latter is small (an order of magnitude smaller than with post-processing) and the increase of the computational cost moderate. The new method is demonstrated with a realistic application in the Norwegian Climate Prediction Model (NorCPM) that provides climate prediction by assimilating sea surface temperature with the Ensemble Kalman Filter in a fully coupled Earth System model (NorESM) with an isopycnal ocean model (MICOM). Over 25-year analysis period, the new method does not impair the predictive skill of the system but corrects the artificial steric drift introduced by data assimilation, and provide estimate in good agreement with IPCC AR5.

Comparison of the didactic lecture with the simulation/model approach for the teaching of a novel perioperative ultrasound curriculum to anesthesiology residents.

PubMed

Ramsingh, Davinder; Alexander, Brenton; Le, Khanhvan; Williams, Wendell; Canales, Cecilia; Cannesson, Maxime

2014-09-01

To expose residents to two methods of education for point-of-care ultrasound, a traditional didactic lecture and a model/simulation-based lecture, which focus on concepts of cardiopulmonary function, volume status, and evaluation of severe thoracic/abdominal injuries; and to assess which method is more effective. Single-center, prospective, blinded trial. University hospital. Anesthesiology residents who were assigned to an educational day during the two-month research study period. Residents were allocated to two groups to receive either a 90-minute, one-on-one didactic lecture or a 90-minute lecture in a simulation center, during which they practiced on a human model and simulation mannequin (normal pathology). Data points included a pre-lecture multiple-choice test, post-lecture multiple-choice test, and post-lecture, human model-based examination. Post-lecture tests were performed within three weeks of the lecture. An experienced sonographer who was blinded to the education modality graded the model-based skill assessment examinations. Participants completed a follow-up survey to assess the perceptions of the quality of their instruction between the two groups. 20 residents completed the study. No differences were noted between the two groups in pre-lecture test scores (P = 0.97), but significantly higher scores for the model/simulation group occurred on both the post-lecture multiple choice (P = 0.038) and post-lecture model (P = 0.041) examinations. Follow-up resident surveys showed significantly higher scores in the model/simulation group regarding overall interest in perioperative ultrasound (P = 0.047) as well understanding of the physiologic concepts (P = 0.021). A model/simulation-based based lecture series may be more effective in teaching the skills needed to perform a point-of-care ultrasound examination to anesthesiology residents. Copyright © 2014 Elsevier Inc. All rights reserved.

Effects of acute chemotherapy-induced mucositis on spontaneous behaviour and the grimace scale in laboratory rats.

PubMed

Whittaker, A L; Leach, M C; Preston, F L; Lymn, K A; Howarth, G S

2016-04-01

Intestinal mucositis is a frequent side-effect of chemotherapy treatment. Many oncological research programs aim to identify novel treatments for this distressing condition, and these programs frequently use rat models. Little is known about the presence and progression of pain in these models and how this can best be treated by analgesic therapy. We used a number of behaviour-based methods of pain assessment to determine which tools were best suited for pain identification. Baseline measures for behavioural assessment, rat grimace score and sociability were determined through analysis of continuously recorded video data and an applied social interaction test (n = 16). Mucositis was then induced by intraperitoneal injection of 5-fluorouracil (150 mg/kg) and further behavioural analyses undertaken. An assessment of enrichment interaction was also made by determining the mass of a plastic chew toy gnawed both pre- and post-chemotherapy injection. Behavioural scoring was performed 1, 6, 12, 24 and 48 h after injection, with facial expression being scored at the 12, 24 and 48 h time-points. Sociability testing was performed once during the post-injection period. No significant differences were found in grimace scores between baseline and later daily measures. Behaviours similar to those previously reported post-laparotomy were observed. Writhing, twitching and back-arching behaviours were most evident in rats affected by mucositis and were increased in frequency (respective P values: 0.002, 0.004 and 0.008) 48 h after chemotherapy injection compared with baseline, implying that pain onset occurred around this time-point. Social investigatory behaviour was also increased (P = 0.002) following disease onset. Each day, rats post-5FU injection gnawed a greater percentage of their Nylabone enrichment by weight than the saline-injected control rats (P = 0.046). These data suggest that, of the tools tested, behavioural assessment scoring may find greatest utility in rodent models of intestinal mucositis and should be investigated further. © The Author(s) 2015.

Post-Flight Assessment of Avcoat Thermal Protection System for the Exploration Flight Test-1

NASA Technical Reports Server (NTRS)

Bose, Deepak; Santos, Jose; Rodriguez, Erika; Mahzari, Milad; Remark, Brian; Muppidi, Suman

2016-01-01

On December 5, 2014 NASA conducted the first flight test of its next generation human-class Orion spacecraft. The flight was called the Exploration Flight Test -1 (EFT-1) which lasted for 4 hours and culminated into a re-entry trajectory at 9 km/s. This flight test of the 5-meter Orion Crew Module demonstrated various sub-systems including the Avcoat ablative thermal protection system (TPS) on the heat shield. The Avcoat TPS had been developed from the Apollo-era recipe with a few key modifications. The engineering for thermal sizing was supported by modeling, analysis, and ground tests in arc jet facilities. This paper will describe a postlfight analysis plan and present results from post-recovery inspections, data analysis from embedded sensors, TPS sample extraction and characterization in the laboratory. After the recovery of the vehicle, a full photographic survey and surface scans of the TPS were performed. The recovered vehicle showed physical evidence of flow disturbances, varying degrees of surface roughness, and excessive recession downstream of compression pads. The TPS recession was measured at more than 200 locations of interest on the Avcoat surface. The heat shield was then processed for sample extraction prior to TPS removal using the 7-Axis Milling machine at Marshall Space Flight Center. Around 182 rectangular TPS samples were extracted for subsequent analysis and investigation. The final paper will also present results of sample analysis. The planned investigation includes sidewall imaging, followed by image analysis to characterize TPS response by quantifying different layers in the char and pyrolysis zones. A full postmortem of the instrumentation and sensor ports will also be performed to confirm no adverse effects due to the sensors themselves. A subset of the samples will undergo structural testing and perform detailed characterization of any cracks and integrity of gore seams. Finally, the material will be characterized with layer-by-layer density measurements and SEM investigations to evaluate material morphology at microstructural level including identification of elements and compounds.

Post-cracking characteristics of high performance fiber reinforced cementitious composites

NASA Astrophysics Data System (ADS)

Suwannakarn, Supat W.

The application of high performance fiber reinforced cement composites (HPFRCC) in structural systems depends primarily on the material's tensile response, which is a direct function of fiber and matrix characteristics, the bond between them, and the fiber content or volume fraction. The objective of this dissertation is to evaluate and model the post-cracking behavior of HPFRCC. In particular, it focused on the influential parameters controlling tensile behavior and the variability associated with them. The key parameters considered include: the stress and strain at first cracking, the stress and strain at maximum post-cracking, the shape of the stress-strain or stress-elongation response, the multiple cracking process, the shape of the resistance curve after crack localization, the energy associated with the multiple cracking process, and the stress versus crack opening response of a single crack. Both steel fibers and polymeric fibers, perceived to have the greatest potential for current commercial applications, are considered. The main variables covered include fiber type (Torex, Hooked, PVA, and Spectra) and fiber volume fraction (ranging from 0.75% to 2.0%). An extensive experimental program is carried out using direct tensile tests and stress-versus crack opening displacement tests on notched tensile prisms. The key experimental results were analysed and modeled using simple prediction equations which, combined with a composite mechanics approach, allowed for predicting schematic simplified stress-strain and stress-displacement response curves for use in structural modeling. The experimental data show that specimens reinforced with Torex fibers performs best, follows by Hooked and Spectra fibers, then PVA fibers. Significant variability in key parameters was observed througout suggesting that variability must be studied further. The new information obtained can be used as input for material models for finite element analysis and can provide greater confidence in using the HPFRC composites in structural applications. It also provides a good foundation to integrate these composites in conventional structural analysis and design.

The effects of specific drills on the flip turns of freestyle swimmers based on a kinesiology analysis

PubMed Central

Peng, Yi; Zhao, Feng; Zhen, Kexin

2016-01-01

Abstract This research aimed to define the key factors in freestyle flip turns via a kinesiology analysis to diagnose swimmers. Hence, specially designed drills were created to improve swimmers’ flip-turn skills and assess the effects of training. Nine Chinese national modern pentathlon athletes ranging in age from 20 to 26 years with an average of 10 years of training experience were tested and trained in this study. The Kistler Performance Analysis System for Swimming was used for the pre- and post-test analyses. A kinesiology analysis of the data from the pre-test was used for the diagnosis and specific drills were adopted for 10 weeks, 3 times per week before the post-test. The comparison of the pre- and post-test performances was used to assess the effects of training. After 10 weeks of specific drill training for flip turns, participants’ turning skills significantly improved. Speed in approaching, somersaulting, pushing-off and gliding all increased. The angles of the knees and hips as well as the force applied improved, which contributed to swimmers’ increased speed. Since the skills needed for a flip turn are complex and not easily diagnosed via observation alone, this kinesiology analysis will make diagnosis objective and easy. PMID:28149404

Which Patients Require Extended Thromboprophylaxis After Colectomy? Modeling Risk and Assessing Indications for Post-discharge Pharmacoprophylaxis.

PubMed

Beal, Eliza W; Tumin, Dmitry; Chakedis, Jeffery; Porter, Erica; Moris, Dimitrios; Zhang, Xu-Feng; Arnold, Mark; Harzman, Alan; Husain, Syed; Schmidt, Carl R; Pawlik, Timothy M

2018-07-01

Given the conflicting nature of reported risk factors for post-discharge venous thromboembolism (VTE) and unclear guidelines for post-discharge pharmacoprophylaxis, we sought to determine risk factors for 30-day post-discharge VTE after colectomy to predict which patients will benefit from post-discharge pharmacoprophylaxis. Patients who underwent colectomy in the American College of Surgeons National Surgical Quality Improvement Project Participant Use Files from 2011 to 2015 were identified. Logistic regression modeling was used. Receiver-operating characteristic curves were used and the best cut-points were determined using Youden's J index (sensitivity + specificity - 1). Hosmer-Lemeshow goodness-of-fit test was used to test model calibration. A random sample of 30% of the cohort was used as a validation set. Among 77,823 cases, the overall incidence of VTE after colectomy was 1.9%, with 0.7% of VTE events occurring in the post-discharge setting. Factors associated with post-discharge VTE risk including body mass index, preoperative albumin, operation time, hospital length of stay, race, smoking status, inflammatory bowel disease, return to the operating room and postoperative ileus were included in logistic regression equation model. The model demonstrated good calibration (goodness of fit P = 0.7137) and good discrimination (area under the curve (AUC) = 0.68; validation set, AUC = 0.70). A score of ≥-5.00 had the maxim sensitivity and specificity, resulting in 36.63% of patients being treated with prophylaxis for an overall VTE risk of 0.67%. Approximately one-third of post-colectomy VTE events occurred after discharge. Patients with predicted post-discharge VTE risk of ≥-5.00 should be recommended for extended post-discharge VTE prophylaxis.

A Comparative Analysis of Pre-Equating and Post-Equating in a Large-Scale Assessment, High Stakes Examination

ERIC Educational Resources Information Center

Ojerinde, Dibu; Popoola, Omokunmi; Onyeneho, Patrick; Egberongbe, Aminat

2016-01-01

Statistical procedure used in adjusting test score difficulties on test forms is known as "equating". Equating makes it possible for various test forms to be used interchangeably. In terms of where the equating method fits in the assessment cycle, there are pre-equating and post-equating methods. The major benefits of pre-equating, when…

Aerodynamic preliminary analysis system 2. Part 1: Theory

NASA Technical Reports Server (NTRS)

Bonner, E.; Clever, W.; Dunn, K.

1981-01-01

A subsonic/supersonic/hypersonic aerodynamic analysis was developed by integrating the Aerodynamic Preliminary Analysis System (APAS), and the inviscid force calculation modules of the Hypersonic Arbitrary Body Program. APAS analysis was extended for nonlinear vortex forces using a generalization of the Polhamus analogy. The interactive system provides appropriate aerodynamic models for a single input geometry data base and has a run/output format similar to a wind tunnel test program. The user's manual was organized to cover the principle system activities of a typical application, geometric input/editing, aerodynamic evaluation, and post analysis review/display. Sample sessions are included to illustrate the specific task involved and are followed by a comprehensive command/subcommand dictionary used to operate the system.

Reference frame access under the effects of great earthquakes: a least squares collocation approach for non-secular post-seismic evolution

NASA Astrophysics Data System (ADS)

Gómez, D. D.; Piñón, D. A.; Smalley, R.; Bevis, M.; Cimbaro, S. R.; Lenzano, L. E.; Barón, J.

2016-03-01

The 2010, (Mw 8.8) Maule, Chile, earthquake produced large co-seismic displacements and non-secular, post-seismic deformation, within latitudes 28°S-40°S extending from the Pacific to the Atlantic oceans. Although these effects are easily resolvable by fitting geodetic extended trajectory models (ETM) to continuous GPS (CGPS) time series, the co- and post-seismic deformation cannot be determined at locations without CGPS (e.g., on passive geodetic benchmarks). To estimate the trajectories of passive geodetic benchmarks, we used CGPS time series to fit an ETM that includes the secular South American plate motion and plate boundary deformation, the co-seismic discontinuity, and the non-secular, logarithmic post-seismic transient produced by the earthquake in the Posiciones Geodésicas Argentinas 2007 (POSGAR07) reference frame (RF). We then used least squares collocation (LSC) to model both the background secular inter-seismic and the non-secular post-seismic components of the ETM at the locations without CGPS. We tested the LSC modeled trajectories using campaign and CGPS data that was not used to generate the model and found standard deviations (95 % confidence level) for position estimates for the north and east components of 3.8 and 5.5 mm, respectively, indicating that the model predicts the post-seismic deformation field very well. Finally, we added the co-seismic displacement field, estimated using an elastic finite element model. The final, trajectory model allows accessing the POSGAR07 RF using post-Maule earthquake coordinates within 5 cm for ˜ 91 % of the passive test benchmarks.

A pilot study: the development of a culturally tailored Malaysian Diabetes Education Module (MY-DEMO) based on the Health Belief Model

PubMed Central

2014-01-01

Background Diabetes education and self-care remains the cornerstone of diabetes management. There are many structured diabetes modules available in the United Kingdom, Europe and United States of America. Contrastingly, few structured and validated diabetes modules are available in Malaysia. This pilot study aims to develop and validate diabetes education material suitable and tailored for a multicultural society like Malaysia. Methods The theoretical framework of this module was founded from the Health Belief Model (HBM). The participants were assessed using 6-item pre- and post-test questionnaires that measured some of the known HBM constructs namely cues to action, perceived severity and perceived benefit. Data was analysed using PASW Statistics 18.0. Results The pre- and post-test questionnaires were administered to 88 participants (31 males). In general, there was a significant increase in the total score in post-test (97.34 ± 6.13%) compared to pre-test (92.80 ± 12.83%) (p < 0.05) and a significant increase in excellent score (>85%) at post-test (84.1%) compared to pre-test (70.5%) (p < 0.05). There was an improvement in post-test score in 4 of 6 items tested. The remaining 2 items which measured the perceived severity and cues to action had poorer post-test score. Conclusions The preliminary results from this pilot study suggest contextualised content material embedded within MY DEMO maybe suitable for integration with the existing diabetes education programmes. This was the first known validated diabetes education programme available in the Malay language. PMID:24708715

A design methodology of magentorheological fluid damper using Herschel-Bulkley model

NASA Astrophysics Data System (ADS)

Liao, Linqing; Liao, Changrong; Cao, Jianguo; Fu, L. J.

2003-09-01

Magnetorheological fluid (MR fluid) is highly concentrated suspension of very small magnetic particle in inorganic oil. The essential behavior of MR fluid is its ability to reversibly change from free-flowing, linear viscous liquids to semi-solids having controllable yield strength in milliseconds when exposed to magnetic field. This feature provides simple, quiet, rapid-response interfaces between electronic controls and mechanical systems. In this paper, a mini-bus MR fluid damper based on plate Poiseuille flow mode is typically analyzed using Herschel-Bulkley model, which can be used to account for post-yield shear thinning or thickening under the quasi-steady flow condition. In the light of various value of flow behavior index, the influences of post-yield shear thinning or thickening on flow velocity profiles of MR fluid in annular damping orifice are examined numerically. Analytical damping coefficient predictions also are compared via the nonlinear Bingham plastic model and Herschel-Bulkley constitutive model. A MR fluid damper, which is designed and fabricated according to design method presented in this paper, has tested by electro-hydraulic servo vibrator and its control system in National Center for Test and Supervision of Coach Quality. The experimental results reveal that the analysis methodology and design theory are reasonable and MR fluid damper can be designed according to the design methodology.

Moving beyond Univariate Post-Hoc Testing in Exercise Science: A Primer on Descriptive Discriminate Analysis

ERIC Educational Resources Information Center

Barton, Mitch; Yeatts, Paul E.; Henson, Robin K.; Martin, Scott B.

2016-01-01

There has been a recent call to improve data reporting in kinesiology journals, including the appropriate use of univariate and multivariate analysis techniques. For example, a multivariate analysis of variance (MANOVA) with univariate post hocs and a Bonferroni correction is frequently used to investigate group differences on multiple dependent…

Exploring the Associations Among Nutrition, Science, and Mathematics Knowledge for an Integrative, Food-Based Curriculum.

PubMed

Stage, Virginia C; Kolasa, Kathryn M; Díaz, Sebastián R; Duffrin, Melani W

2018-01-01

Explore associations between nutrition, science, and mathematics knowledge to provide evidence that integrating food/nutrition education in the fourth-grade curriculum may support gains in academic knowledge. Secondary analysis of a quasi-experimental study. Sample included 438 students in 34 fourth-grade classrooms across North Carolina and Ohio; mean age 10 years old; gender (I = 53.2% female; C = 51.6% female). Dependent variable = post-test-nutrition knowledge; independent variables = baseline-nutrition knowledge, and post-test science and mathematics knowledge. Analyses included descriptive statistics and multiple linear regression. The hypothesized model predicted post-nutrition knowledge (F(437) = 149.4, p < .001; Adjusted R = .51). All independent variables were significant predictors with positive association. Science and mathematics knowledge were predictive of nutrition knowledge indicating use of an integrative science and mathematics curriculum to improve academic knowledge may also simultaneously improve nutrition knowledge among fourth-grade students. Teachers can benefit from integration by meeting multiple academic standards, efficiently using limited classroom time, and increasing nutrition education provided in the classroom. © 2018, American School Health Association.

Using deep neural networks to augment NIF post-shot analysis

NASA Astrophysics Data System (ADS)

Humbird, Kelli; Peterson, Luc; McClarren, Ryan; Field, John; Gaffney, Jim; Kruse, Michael; Nora, Ryan; Spears, Brian

2017-10-01

Post-shot analysis of National Ignition Facility (NIF) experiments is the process of determining which simulation inputs yield results consistent with experimental observations. This analysis is typically accomplished by running suites of manually adjusted simulations, or Monte Carlo sampling surrogate models that approximate the response surfaces of the physics code. These approaches are expensive and often find simulations that match only a small subset of observables simultaneously. We demonstrate an alternative method for performing post-shot analysis using inverse models, which map directly from experimental observables to simulation inputs with quantified uncertainties. The models are created using a novel machine learning algorithm which automates the construction and initialization of deep neural networks to optimize predictive accuracy. We show how these neural networks, trained on large databases of post-shot simulations, can rigorously quantify the agreement between simulation and experiment. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

A Novel Stress-Diathesis Model to Predict Risk of Post-operative Delirium: Implications for Intra-operative Management.

PubMed

El-Gabalawy, Renée; Patel, Ronak; Kilborn, Kayla; Blaney, Caitlin; Hoban, Christopher; Ryner, Lawrence; Funk, Duane; Legaspi, Regina; Fisher, Joseph A; Duffin, James; Mikulis, David J; Mutch, W Alan C

2017-01-01

Introduction: Risk assessment for post-operative delirium (POD) is poorly developed. Improved metrics could greatly facilitate peri-operative care as costs associated with POD are staggering. In this preliminary study, we develop a novel stress-diathesis model based on comprehensive pre-operative psychiatric and neuropsychological testing, a blood oxygenation level-dependent (BOLD) magnetic resonance imaging (MRI) carbon dioxide (CO 2 ) stress test, and high fidelity measures of intra-operative parameters that may interact facilitating POD. Methods: The study was approved by the ethics board at the University of Manitoba and registered at clinicaltrials.gov as NCT02126215. Twelve patients were studied. Pre-operative psychiatric symptom measures and neuropsychological testing preceded MRI featuring a BOLD MRI CO 2 stress test whereby BOLD scans were conducted while exposing participants to a rigorously controlled CO 2 stimulus. During surgery the patient had hemodynamics and end-tidal gases downloaded at 0.5 hz. Post-operatively, the presence of POD and POD severity was comprehensively assessed using the Confusion Assessment Measure -Severity (CAM-S) scoring instrument on days 0 (surgery) through post-operative day 5, and patients were followed up at least 1 month post-operatively. Results: Six of 12 patients had no evidence of POD (non-POD). Three patients had POD and 3 had clinically significant confusional states (referred as subthreshold POD; ST-POD) (score ≥ 5/19 on the CAM-S). Average severity for delirium was 1.3 in the non-POD group, 3.2 in ST-POD, and 6.1 in POD (F-statistic = 15.4, p < 0.001). Depressive symptoms, and cognitive measures of semantic fluency and executive functioning/processing speed were significantly associated with POD. Second level analysis revealed an increased inverse BOLD responsiveness to CO 2 pre-operatively in ST-POD and marked increase in the POD groups when compared to the non-POD group. An association was also noted for the patient population to manifest leucoaraiosis as assessed with advanced neuroimaging techniques. Results provide preliminary support for the interacting of diatheses (vulnerabilities) and intra-operative stressors on the POD phenotype. Conclusions: The stress-diathesis model has the potential to aid in risk assessment for POD. Based on these initial findings, we make some recommendations for intra-operative management for patients at risk of POD.

A Novel Stress-Diathesis Model to Predict Risk of Post-operative Delirium: Implications for Intra-operative Management

PubMed Central

El-Gabalawy, Renée; Patel, Ronak; Kilborn, Kayla; Blaney, Caitlin; Hoban, Christopher; Ryner, Lawrence; Funk, Duane; Legaspi, Regina; Fisher, Joseph A.; Duffin, James; Mikulis, David J.; Mutch, W. Alan C.

2017-01-01

Introduction: Risk assessment for post-operative delirium (POD) is poorly developed. Improved metrics could greatly facilitate peri-operative care as costs associated with POD are staggering. In this preliminary study, we develop a novel stress-diathesis model based on comprehensive pre-operative psychiatric and neuropsychological testing, a blood oxygenation level-dependent (BOLD) magnetic resonance imaging (MRI) carbon dioxide (CO2) stress test, and high fidelity measures of intra-operative parameters that may interact facilitating POD. Methods: The study was approved by the ethics board at the University of Manitoba and registered at clinicaltrials.gov as NCT02126215. Twelve patients were studied. Pre-operative psychiatric symptom measures and neuropsychological testing preceded MRI featuring a BOLD MRI CO2 stress test whereby BOLD scans were conducted while exposing participants to a rigorously controlled CO2 stimulus. During surgery the patient had hemodynamics and end-tidal gases downloaded at 0.5 hz. Post-operatively, the presence of POD and POD severity was comprehensively assessed using the Confusion Assessment Measure –Severity (CAM-S) scoring instrument on days 0 (surgery) through post-operative day 5, and patients were followed up at least 1 month post-operatively. Results: Six of 12 patients had no evidence of POD (non-POD). Three patients had POD and 3 had clinically significant confusional states (referred as subthreshold POD; ST-POD) (score ≥ 5/19 on the CAM-S). Average severity for delirium was 1.3 in the non-POD group, 3.2 in ST-POD, and 6.1 in POD (F-statistic = 15.4, p < 0.001). Depressive symptoms, and cognitive measures of semantic fluency and executive functioning/processing speed were significantly associated with POD. Second level analysis revealed an increased inverse BOLD responsiveness to CO2 pre-operatively in ST-POD and marked increase in the POD groups when compared to the non-POD group. An association was also noted for the patient population to manifest leucoaraiosis as assessed with advanced neuroimaging techniques. Results provide preliminary support for the interacting of diatheses (vulnerabilities) and intra-operative stressors on the POD phenotype. Conclusions: The stress-diathesis model has the potential to aid in risk assessment for POD. Based on these initial findings, we make some recommendations for intra-operative management for patients at risk of POD. PMID:28868035

Field scale test of multi-dimensional flow and morphodynamic simulations used for restoration design analysis

USGS Publications Warehouse

McDonald, Richard R.; Nelson, Jonathan M.; Fosness, Ryan L.; Nelson, Peter O.; Constantinescu, George; Garcia, Marcelo H.; Hanes, Dan

2016-01-01

Two- and three-dimensional morphodynamic simulations are becoming common in studies of channel form and process. The performance of these simulations are often validated against measurements from laboratory studies. Collecting channel change information in natural settings for model validation is difficult because it can be expensive and under most channel forming flows the resulting channel change is generally small. Several channel restoration projects designed in part to armor large meanders with several large spurs constructed of wooden piles on the Kootenai River, ID, have resulted in rapid bed elevation change following construction. Monitoring of these restoration projects includes post- restoration (as-built) Digital Elevation Models (DEMs) as well as additional channel surveys following high channel forming flows post-construction. The resulting sequence of measured bathymetry provides excellent validation data for morphodynamic simulations at the reach scale of a real river. In this paper we test the performance a quasi-three-dimensional morphodynamic simulation against the measured elevation change. The resulting simulations predict the pattern of channel change reasonably well but many of the details such as the maximum scour are under predicted.

Dynamical Modeling of NGC 6397: Simulated HST Imaging

NASA Astrophysics Data System (ADS)

Dull, J. D.; Cohn, H. N.; Lugger, P. M.; Slavin, S. D.; Murphy, B. W.

1994-12-01

The proximity of NGC 6397 (2.2 kpc) provides an ideal opportunity to test current dynamical models for globular clusters with the HST Wide-Field/Planetary Camera (WFPC2)\\@. We have used a Monte Carlo algorithm to generate ensembles of simulated Planetary Camera (PC) U-band images of NGC 6397 from evolving, multi-mass Fokker-Planck models. These images, which are based on the post-repair HST-PC point-spread function, are used to develop and test analysis methods for recovering structural information from actual HST imaging. We have considered a range of exposure times up to 2.4times 10(4) s, based on our proposed HST Cycle 5 observations. Our Fokker-Planck models include energy input from dynamically-formed binaries. We have adopted a 20-group mass spectrum extending from 0.16 to 1.4 M_sun. We use theoretical luminosity functions for red giants and main sequence stars. Horizontal branch stars, blue stragglers, white dwarfs, and cataclysmic variables are also included. Simulated images are generated for cluster models at both maximal core collapse and at a post-collapse bounce. We are carrying out stellar photometry on these images using ``DAOPHOT-assisted aperture photometry'' software that we have developed. We are testing several techniques for analyzing the resulting star counts, to determine the underlying cluster structure, including parametric model fits and the nonparametric density estimation methods. Our simulated images also allow us to investigate the accuracy and completeness of methods for carrying out stellar photometry in HST Planetary Camera images of dense cluster cores.

Fixed Base Modal Survey of the MPCV Orion European Service Module Structural Test Article

NASA Technical Reports Server (NTRS)

Winkel, James P.; Akers, J. C.; Suarez, Vicente J.; Staab, Lucas D.; Napolitano, Kevin L.

2017-01-01

Recently, the MPCV Orion European Service Module Structural Test Article (E-STA) underwent sine vibration testing using the multi-axis shaker system at NASA GRC Plum Brook Station Mechanical Vibration Facility (MVF). An innovative approach using measured constraint shapes at the interface of E-STA to the MVF allowed high-quality fixed base modal parameters of the E-STA to be extracted, which have been used to update the E-STA finite element model (FEM), without the need for a traditional fixed base modal survey. This innovative approach provided considerable program cost and test schedule savings. This paper documents this modal survey, which includes the modal pretest analysis sensor selection, the fixed base methodology using measured constraint shapes as virtual references and measured frequency response functions, and post-survey comparison between measured and analysis fixed base modal parameters.

Risk factors for post-traumatic pneumonia in patients with retained haemothorax: results of a prospective, observational AAST study.

PubMed

Bradley, Matthew; Okoye, Obi; DuBose, Joseph; Inaba, Kenji; Demetriades, Demetrios; Scalea, Thomas; O'Connor, James; Menaker, Jay; Morales, Carlos; Shiflett, Tony; Brown, Carlos

2013-09-01

Retained haemothorax (RH) is a problematic sequela of thoracic trauma, reported in up to 20% of patients following chest injury. RH is associated with a higher severity of thoracic trauma and may portend the onset of other serious post-traumatic complications, including pneumonia. The development of pneumonia has previously been reported to be as high as 19.5% in the setting of traumatic RH. The purpose of this study was to identify risk factors for the development of pneumonia as a complication in RH. We utilized the American Association for the Surgery of Trauma Post-Traumatic Retained Haemothorax database. Patients with post-traumatic RH were prospectively enrolled from 2009 to 2011. Inclusion criteria were placement of a thoracostomy tube within 24h of admission for the evacuation of pneumothorax or haemothorax and subsequent chest computed tomography scan chest showing RH. Patients treated with thoracotomy before placement of tube thoracostomy were excluded. For univariate analysis, the Chi-square test with Yates correction was used for comparison of categorical risk factors and the Student's t-test or the Mann-Whitney test for comparison of continuous risk factors. To identify independent risk factors for the development of pneumonia, variables from the univariate analysis significant at p<0.2 were entered into a forward logistic regression model. Adjusted odds ratio and 95% confidence intervals (CI) were derived. 328 patients with post-traumatic RH from 20 United States centres were enrolled. After stepwise regression analysis, ISS>25 (adjusted OR: 7.1; 95% CI: 3.1, 16.4; p<0.001), blunt mechanism of injury (adjusted OR: 3.5; 95% CI: 1.7, 7.2; p=0.001), and failure to administer peri-procedural antibiotics on the initial thoracostomy tube placement (adjusted OR: 2.6; 95% CI: 1.30, 5.4; p=0.01) were found to be independent predictors of the pneumonia in patients with post-traumatic RH. To our knowledge, our current study is the largest attempt to identify the independent predictors for pneumonia in this population. Our data show that elevated ISS, blunt thoracic trauma, and failure to administer peri-procedural antibiotics on tube thoracostomy placement are the statistically significant independent risk factors. Published by Elsevier Ltd.

The effect of friction in the hold down post spherical bearings on hold down post loads

NASA Technical Reports Server (NTRS)

Richardson, James A.

1990-01-01

The effect of friction at the connection of the Solid Rocket Booster (SRB) aft skirt and the mobile launch platform (MLP) hold down posts was analyzed. A simplified model of the shuttle response during the Space Shuttle Main Engine (SSME) buildup was constructed. The model included the effect of stick-slip friction for the rotation of the skirt about the spherical bearing. Current finite element models assume the joint is completely frictionless in rotation and therefore no moment is transferred between the skirt and the hold down posts. The model was partially verified against test data and preliminary parameter studies were performed. The parameter studies indicated that the coefficient of friction strongly influenced the moment on the hold down posts. The coefficient of friction had little effect on hold down post vertical loads, however. Further calibration of the model is necessary before the effect of friction on the hold down post horizontal loads can be analyzed.

The influence of project-based learning on the student conception about kinematics and critical thinking skills

NASA Astrophysics Data System (ADS)

Handhika, J.; Cari, C.; Sunarno, W.; Suparmi, A.; Kurniadi, E.

2018-05-01

This research revealed the influence of project-based learning (PjBL) to increasing the level of the conception. The research method used the pre-experimental design with one group pre-test post-test. PjBL applied to students of physics education program of IKIP PGRI Madiun (23 Students). The test used to determine the level of conception is multiple choice tests and index of certainty. Activities on PjBL described. Obtained that the PjBL model can increase the level of conception and Critical thinking skills with the average normalized gain 0.49 and 0.57 (Medium category). It can be concluded that the PjBL could improve the level of conception and critical thinking ability of the students. Implementation of each model phase following learning objectives and needs analysis is the key to improve both.

Impact of Vehicle Flexibility on IRVE-II Flight Dynamics

NASA Technical Reports Server (NTRS)

Bose, David M.; Toniolo, Matthew D.; Cheatwood, F. M.; Hughes, Stephen J.; Dillman, Robert A.

2011-01-01

The Inflatable Re-entry Vehicle Experiment II (IRVE-II) successfully launched from Wallops Flight Facility (WFF) on August 17, 2009. The primary objectives of this flight test were to demonstrate inflation and re-entry survivability, assess the thermal and drag performance of the reentry vehicle, and to collect flight data for refining pre-flight design and analysis tools. Post-flight analysis including trajectory reconstruction outlined in O Keefe3 demonstrated that the IRVE-II Research Vehicle (RV) met mission objectives but also identified a few anomalies of interest to flight dynamics engineers. Most notable of these anomalies was high normal acceleration during the re-entry pressure pulse. Deflection of the inflatable aeroshell during the pressure pulse was evident in flight video and identified as the likely cause of the anomaly. This paper provides a summary of further post-flight analysis with particular attention to the impact of aeroshell flexibility on flight dynamics and the reconciliation of flight performance with pre-flight models. Independent methods for estimating the magnitude of the deflection of the aeroshell experienced on IRVE-II are discussed. The use of the results to refine models for pre-flight prediction of vehicle performance is then described.

A novel dentin bond strength measurement technique using a composite disk in diametral compression.

PubMed

Huang, Shih-Hao; Lin, Lian-Shan; Rudney, Joel; Jones, Rob; Aparicio, Conrado; Lin, Chun-Pin; Fok, Alex

2012-04-01

New methods are needed that can predict the clinical failure of dental restorations that primarily rely on dentin bonding. Existing methods have shortcomings, e.g. severe deviation in the actual stress distribution from theory and a large standard deviation in the measured bond strength. We introduce here a novel test specimen by examining an endodontic model for dentin bonding. Specifically, we evaluated the feasibility of using the modified Brazilian disk test to measure the post-dentin interfacial bond strength. Four groups of resin composite disks which contained a slice of dentin with or without an intracanal post in the center were tested under diametral compression until fracture. Advanced nondestructive examination and imaging techniques in the form of acoustic emission (AE) and digital image correlation (DIC) were used innovatively to capture the fracture process in real time. DIC showed strain concentration first appearing at one of the lateral sides of the post-dentin interface. The appearance of the interfacial strain concentration also coincided with the first AE signal detected. Utilizing both the experimental data and finite-element analysis, the bond/tensile strengths were calculated to be: 11.2 MPa (fiber posts), 12.9 MPa (metal posts), 8.9 MPa (direct resin fillings) and 82.6 MPa for dentin. We have thus established the feasibility of using the composite disk in diametral compression to measure the bond strength between intracanal posts and dentin. The new method has the advantages of simpler specimen preparation, no premature failure, more consistent failure mode and smaller variations in the calculated bond strength. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Modeling the Afferent Dynamics of the Baroreflex Control System

PubMed Central

Mahdi, Adam; Sturdy, Jacob; Ottesen, Johnny T.; Olufsen, Mette S.

2013-01-01

In this study we develop a modeling framework for predicting baroreceptor firing rate as a function of blood pressure. We test models within this framework both quantitatively and qualitatively using data from rats. The models describe three components: arterial wall deformation, stimulation of mechanoreceptors located in the BR nerve-endings, and modulation of the action potential frequency. The three sub-systems are modeled individually following well-established biological principles. The first submodel, predicting arterial wall deformation, uses blood pressure as an input and outputs circumferential strain. The mechanoreceptor stimulation model, uses circumferential strain as an input, predicting receptor deformation as an output. Finally, the neural model takes receptor deformation as an input predicting the BR firing rate as an output. Our results show that nonlinear dependence of firing rate on pressure can be accounted for by taking into account the nonlinear elastic properties of the artery wall. This was observed when testing the models using multiple experiments with a single set of parameters. We find that to model the response to a square pressure stimulus, giving rise to post-excitatory depression, it is necessary to include an integrate-and-fire model, which allows the firing rate to cease when the stimulus falls below a given threshold. We show that our modeling framework in combination with sensitivity analysis and parameter estimation can be used to test and compare models. Finally, we demonstrate that our preferred model can exhibit all known dynamics and that it is advantageous to combine qualitative and quantitative analysis methods. PMID:24348231

INVESTIGATING DIFFERENCES IN BRAIN FUNCTIONAL NETWORKS USING HIERARCHICAL COVARIATE-ADJUSTED INDEPENDENT COMPONENT ANALYSIS.

PubMed

Shi, Ran; Guo, Ying

2016-12-01

Human brains perform tasks via complex functional networks consisting of separated brain regions. A popular approach to characterize brain functional networks in fMRI studies is independent component analysis (ICA), which is a powerful method to reconstruct latent source signals from their linear mixtures. In many fMRI studies, an important goal is to investigate how brain functional networks change according to specific clinical and demographic variabilities. Existing ICA methods, however, cannot directly incorporate covariate effects in ICA decomposition. Heuristic post-ICA analysis to address this need can be inaccurate and inefficient. In this paper, we propose a hierarchical covariate-adjusted ICA (hc-ICA) model that provides a formal statistical framework for estimating covariate effects and testing differences between brain functional networks. Our method provides a more reliable and powerful statistical tool for evaluating group differences in brain functional networks while appropriately controlling for potential confounding factors. We present an analytically tractable EM algorithm to obtain maximum likelihood estimates of our model. We also develop a subspace-based approximate EM that runs significantly faster while retaining high accuracy. To test the differences in functional networks, we introduce a voxel-wise approximate inference procedure which eliminates the need of computationally expensive covariance matrix estimation and inversion. We demonstrate the advantages of our methods over the existing method via simulation studies. We apply our method to an fMRI study to investigate differences in brain functional networks associated with post-traumatic stress disorder (PTSD).

Standardization and validation of real time PCR assays for the diagnosis of histoplasmosis using three molecular targets in an animal model

PubMed Central

López, Luisa F.; Muñoz, César O.; Cáceres, Diego H.; Tobón, Ángela M.; Loparev, Vladimir; Clay, Oliver; Chiller, Tom; Litvintseva, Anastasia; Gade, Lalitha; González, Ángel

2017-01-01

Histoplasmosis is considered one of the most important endemic and systemic mycoses worldwide. Until now few molecular techniques have been developed for its diagnosis. The aim of this study was to develop and evaluate three real time PCR (qPCR) protocols for different protein-coding genes (100-kDa, H and M antigens) using an animal model. Fresh and formalin-fixed and paraffin-embedded (FFPE) lung tissues from BALB/c mice inoculated i.n. with 2.5x106 Histoplasma capsulatum yeast or PBS were obtained at 1, 2, 3, 4, 8, 12 and 16 weeks post-infection. A collection of DNA from cultures representing different clades of H. capsulatum (30 strains) and other medically relevant pathogens (36 strains of related fungi and Mycobacterium tuberculosis) were used to analyze sensitivity and specificity. Analytical sensitivity and specificity were 100% when DNAs from the different strains were tested. The highest fungal burden occurred at first week post-infection and complete fungal clearance was observed after the third week; similar results were obtained when the presence of H. capsulatum yeast cells was demonstrated in histopathological analysis. In the first week post-infection, all fresh and FFPE lung tissues from H. capsulatum-infected animals were positive for the qPCR protocols tested except for the M antigen protocol, which gave variable results when fresh lung tissue samples were analyzed. In the second week, all qPCR protocols showed variable results for both fresh and FFPE tissues. Samples from the infected mice at the remaining times post-infection and uninfected mice (controls) were negative for all protocols. Good agreement was observed between CFUs, histopathological analysis and qPCR results for the 100-kDa and H antigen protocols. We successfully standardized and validated three qPCR assays for detecting H. capsulatum DNA in fresh and FFPE tissues, and conclude that the 100-kDa and H antigen molecular assays are promising tests for diagnosing this mycosis. PMID:29287097

High post-partum levels of corticosterone given to dams influence postnatal hippocampal cell proliferation and behavior of offspring: A model of post-partum stress and possible depression.

PubMed

Brummelte, Susanne; Pawluski, Jodi L; Galea, Liisa A M

2006-09-01

Post-partum stress and depression (PPD) have a significant effect on child development and behavior. Depression is associated with hypercortisolism in humans, and the fluctuating levels of hormones, including corticosterone, during pregnancy and the post-partum, may contribute to PPD. The present study was developed to investigate the effects of high-level corticosterone (CORT) post-partum in the mother on postnatal neurogenesis and behavior in the offspring. Sprague-Dawley dams were treated with either CORT (40 mg/kg) or sesame oil injections daily for 26 days beginning the day after giving birth. Dams were tested in the forced swim test (FST) and in the open field test (OFT) on days 24-26 post-partum. Results showed that the dams exposed to CORT expressed "depressive-like" behavior compared to controls, with decreased struggling behavior and increased immobility in the FST. To investigate the effects of treatment on hippocampal postnatal cell proliferation and survival in the offspring, males and females from treated dams were injected with BrdU (50 mg/kg) on postnatal day 21 and perfused either 24 h (cell proliferation) or 21 days (cell survival) later. Furthermore, male and female offspring from each litter were tested in adulthood on various behavioral tests, including the forced swim test, open field test, resistance to capture test and elevated plus maze. Intriguingly, male, but not female, offspring of CORT-treated dams exhibited decreased postnatal cell proliferation in the dentate gyrus. Both male and female offspring of CORT-treated dams showed higher resistance to capture and greater locomotor activity as assessed in the open field test. As high levels of CORT may be a characteristic of stress and/or depression, these findings support a model of 'CORT-induced' post-partum stress and possibly depression and demonstrate that the offspring of affected dams can exhibit changes in postnatal neurogenesis and behavior in adulthood.

40 CFR 91.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2011 CFR

2011-07-01

... that may occur between the pre and post checks is not specified. However, the difference between pre... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test...

40 CFR 91.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2014 CFR

2014-07-01

... that may occur between the pre and post checks is not specified. However, the difference between pre... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test...

40 CFR 91.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... that may occur between the pre and post checks is not specified. However, the difference between pre... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test...

40 CFR 91.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2012 CFR

2012-07-01

... that may occur between the pre and post checks is not specified. However, the difference between pre... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test...

40 CFR 91.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2013 CFR

2013-07-01

... that may occur between the pre and post checks is not specified. However, the difference between pre... drift nor the span drift between the pre-analysis and post-analysis checks on any range used may exceed... PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test...

Application of CFE/POST2 for Simulation of Launch Vehicle Stage Separation

NASA Technical Reports Server (NTRS)

Pamadi, Bandu N.; Tartabini, Paul V.; Toniolo, Matthew D.; Roithmayr, Carlos M.; Karlgaard, Christopher D.; Samareh, Jamshid A.

2009-01-01

The constraint force equation (CFE) methodology provides a framework for modeling constraint forces and moments acting at joints that connect multiple vehicles. With implementation in Program to Optimize Simulated Trajectories II (POST 2), the CFE provides a capability to simulate end-to-end trajectories of launch vehicles, including stage separation. In this paper, the CFE/POST2 methodology is applied to the Shuttle-SRB separation problem as a test and validation case. The CFE/POST2 results are compared with STS-1 flight test data.

Gambling-Related Distortions and Problem Gambling in Adolescents: A Model to Explain Mechanisms and Develop Interventions

PubMed Central

Donati, Maria Anna; Chiesi, Francesca; Iozzi, Adriana; Manfredi, Antonella; Fagni, Fabrizio; Primi, Caterina

2018-01-01

Although a number of gambling preventive initiatives have been realized with adolescents, many of them have been developed in absence of a clear and explicitly described theoretical model. The present work was aimed to analyze the adequacy of a model to explain gambling behavior referring to gambling-related cognitive distortions (Study 1), and to verify the effectiveness of a preventive intervention developed on the basis of this model (Study 2). Following dual-process theories on cognitive functioning, in Study 1 we tested a model in which mindware gap, i.e., susceptibility to the gambler’s fallacy, and contaminated mindware, i.e., superstitious thinking, were the antecedents of gambling-related cognitive distortions that, in turn, affect gambling frequency and problem gambling. Participants were 306 male adolescents (Mage = 17.2 years). A path analysis indicated that cognitive distortions have a mediating role in the relationship that links probabilistic reasoning fallacy and superstitious thinking with problem gambling. Following these findings, in Study 2 we developed a school-based intervention aimed to reduce gambling-related cognitive distortions acting on the above cited mindware problems. A pre- and post-test design – with a 6 months follow-up – was performed with 34 male adolescents (Mage = 16.8), randomly assigned to two groups (Training and No Training), and their baseline equivalence was verified. A Mixed 2 × 2 ANOVA attested a significant Time X Group interaction, indicating a significant reduction of the cognitive distortions from pre-test to post-test only in the Training group. The follow-up attested to the stability of the training effects and the reduction of gambling frequency over time. These findings suggest that prevention strategies should address mindware problems, which can be considered as predictors of gambling-related cognitive distortions. PMID:29354081

Gambling-Related Distortions and Problem Gambling in Adolescents: A Model to Explain Mechanisms and Develop Interventions.

PubMed

Donati, Maria Anna; Chiesi, Francesca; Iozzi, Adriana; Manfredi, Antonella; Fagni, Fabrizio; Primi, Caterina

2017-01-01

Although a number of gambling preventive initiatives have been realized with adolescents, many of them have been developed in absence of a clear and explicitly described theoretical model. The present work was aimed to analyze the adequacy of a model to explain gambling behavior referring to gambling-related cognitive distortions (Study 1), and to verify the effectiveness of a preventive intervention developed on the basis of this model (Study 2). Following dual-process theories on cognitive functioning, in Study 1 we tested a model in which mindware gap , i.e., susceptibility to the gambler's fallacy, and contaminated mindware , i.e., superstitious thinking, were the antecedents of gambling-related cognitive distortions that, in turn, affect gambling frequency and problem gambling. Participants were 306 male adolescents ( M age = 17.2 years). A path analysis indicated that cognitive distortions have a mediating role in the relationship that links probabilistic reasoning fallacy and superstitious thinking with problem gambling. Following these findings, in Study 2 we developed a school-based intervention aimed to reduce gambling-related cognitive distortions acting on the above cited mindware problems. A pre- and post-test design - with a 6 months follow-up - was performed with 34 male adolescents ( M age = 16.8), randomly assigned to two groups (Training and No Training), and their baseline equivalence was verified. A Mixed 2 × 2 ANOVA attested a significant Time X Group interaction, indicating a significant reduction of the cognitive distortions from pre-test to post-test only in the Training group. The follow-up attested to the stability of the training effects and the reduction of gambling frequency over time. These findings suggest that prevention strategies should address mindware problems, which can be considered as predictors of gambling-related cognitive distortions.

Comparing Science Virtual and Paper-Based Test to Measure Students’ Critical Thinking based on VAK Learning Style Model

NASA Astrophysics Data System (ADS)

Rosyidah, T. H.; Firman, H.; Rusyati, L.

2017-02-01

This research was comparing virtual and paper-based test to measure students’ critical thinking based on VAK (Visual-Auditory-Kynesthetic) learning style model. Quasi experiment method with one group post-test only design is applied in this research in order to analyze the data. There was 40 eight grade students at one of public junior high school in Bandung becoming the sample in this research. The quantitative data was obtained through 26 questions about living thing and environment sustainability which is constructed based on the eight elements of critical thinking and be provided in the form of virtual and paper-based test. Based on analysis of the result, it is shown that within visual, auditory, and kinesthetic were not significantly difference in virtual and paper-based test. Besides, all result was supported by quistionnaire about students’ respond on virtual test which shows 3.47 in the scale of 4. Means that student showed positive respond in all aspet measured, which are interest, impression, and expectation.

Hydraulic fracture treatment design and postfracture analysis: Maxus Exploration Company, Ellis Ranch Field, Ochiltree County, Texas. Carl Ellis E/3 Cleveland Sand. Topical report, October 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

A discussion of a hydraulic fracture treatment and post-fracture tests on a tight gas sands well is presented. The treatment design was based on the results of an analysis of the stimulation of another well in the same field and a minifracture analysis of the Carl Ellis E-3. The quality and consistency of the interpretation and evaluation of the Carl Ellis E-3 and H.T. Glasgow No. 2 suggest that a consistent reservoir model has been developed that allows for further improvement of the stimulation technique in the Cleveland Formation.

Cooperative well report: Maxus exploration Company Carl Ellis E-3 well, Ochiltree County, Texas. Topical report, January 1992-March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holditch, S.A.; Whitehead, W.S.; Davidson, B.M.

Maxus Exploration drilled the Carl Ellis E-3 well in the Ellis Ranch Field, Ochiltree County, Texas in December 1991. The GRI cooperative research program on this well included coring, logging, stress testing, pre-fracture well testing, a mini-frac, post-fracture production data analysis, a fracture treatment, and a post-fracture well test. The well was completed in the Cleveland formation at 6,929-7,008 feet. After a ballout treatment, the well flowed 32 Mscf/day. Results of the pre-fracture pressure buildup test indicate a permeability-thickness product of 1.45 md-ft, a skin factor of -0.05, and a reservoir pressure of 1900 psi. The well was fracture treatedmore » with 70,000 gallons of a 40 lb/1000 gallon linear gel and 185,000 pounds of 20/40 sand. The initial post-fracture flow rate was approximately 500 Mscf/day. Post-fracture analysis with TRIFRAC indicated that the propped fracture height at the wellbore was 330 feet and the propped fracture length was 93 feet.« less

Laboratory and 3-D distinct element analysis of the failure mechanism of a slope under external surcharge

NASA Astrophysics Data System (ADS)

Li, N.; Cheng, Y. M.

2015-01-01

Landslide is a major disaster resulting in considerable loss of human lives and property damages in hilly terrain in Hong Kong, China and many other countries. The factor of safety and the critical slip surface for slope stabilization are the main considerations for slope stability analysis in the past, while the detailed post-failure conditions of the slopes have not been considered in sufficient detail. There is however increasing interest in the consequences after the initiation of failure that includes the development and propagation of the failure surfaces, the amount of failed mass and runoff and the affected region. To assess the development of slope failure in more detail and to consider the potential danger of slopes after failure has initiated, the slope stability problem under external surcharge is analyzed by the distinct element method (DEM) and a laboratory model test in the present research. A more refined study about the development of failure, microcosmic failure mechanisms and the post-failure mechanisms of slopes will be carried out. The numerical modeling method and the various findings from the present work can provide an alternate method of analysis of slope failure, which can give additional information not available from the classical methods of analysis.

Laboratory and 3-D-distinct element analysis of failure mechanism of slope under external surcharge

NASA Astrophysics Data System (ADS)

Li, N.; Cheng, Y. M.

2014-09-01

Landslide is a major disaster resulting in considerable loss of human lives and property damages in hilly terrain in Hong Kong, China and many other countries. The factor of safety and the critical slip surface for slope stabilization are the main considerations for slope stability analysis in the past, while the detailed post-failure conditions of the slopes have not been considered in sufficient details. There are however increasing interest on the consequences after the initiation of failure which includes the development and propagation of the failure surfaces, the amount of failed mass and runoff and the affected region. To assess the development of slope failure in more details and to consider the potential danger of slopes after failure has initiated, the slope stability problem under external surcharge is analyzed by the distinct element method (DEM) and laboratory model test in the present research. A more refined study about the development of failure, microcosmic failure mechanism and the post-failure mechanism of slope will be carried out. The numerical modeling method and the various findings from the present work can provide an alternate method of analysis of slope failure which can give additional information not available from the classical methods of analysis.

The variability of software scoring of the CDMAM phantom associated with a limited number of images

NASA Astrophysics Data System (ADS)

Yang, Chang-Ying J.; Van Metter, Richard

2007-03-01

Software scoring approaches provide an attractive alternative to human evaluation of CDMAM images from digital mammography systems, particularly for annual quality control testing as recommended by the European Protocol for the Quality Control of the Physical and Technical Aspects of Mammography Screening (EPQCM). Methods for correlating CDCOM-based results with human observer performance have been proposed. A common feature of all methods is the use of a small number (at most eight) of CDMAM images to evaluate the system. This study focuses on the potential variability in the estimated system performance that is associated with these methods. Sets of 36 CDMAM images were acquired under carefully controlled conditions from three different digital mammography systems. The threshold visibility thickness (TVT) for each disk diameter was determined using previously reported post-analysis methods from the CDCOM scorings for a randomly selected group of eight images for one measurement trial. This random selection process was repeated 3000 times to estimate the variability in the resulting TVT values for each disk diameter. The results from using different post-analysis methods, different random selection strategies and different digital systems were compared. Additional variability of the 0.1 mm disk diameter was explored by comparing the results from two different image data sets acquired under the same conditions from the same system. The magnitude and the type of error estimated for experimental data was explained through modeling. The modeled results also suggest a limitation in the current phantom design for the 0.1 mm diameter disks. Through modeling, it was also found that, because of the binomial statistic nature of the CDMAM test, the true variability of the test could be underestimated by the commonly used method of random re-sampling.

Aircraft Fault Detection Using Real-Time Frequency Response Estimation

NASA Technical Reports Server (NTRS)

Grauer, Jared A.

2016-01-01

A real-time method for estimating time-varying aircraft frequency responses from input and output measurements was demonstrated. The Bat-4 subscale airplane was used with NASA Langley Research Center's AirSTAR unmanned aerial flight test facility to conduct flight tests and collect data for dynamic modeling. Orthogonal phase-optimized multisine inputs, summed with pilot stick and pedal inputs, were used to excite the responses. The aircraft was tested in its normal configuration and with emulated failures, which included a stuck left ruddervator and an increased command path latency. No prior knowledge of a dynamic model was used or available for the estimation. The longitudinal short period dynamics were investigated in this work. Time-varying frequency responses and stability margins were tracked well using a 20 second sliding window of data, as compared to a post-flight analysis using output error parameter estimation and a low-order equivalent system model. This method could be used in a real-time fault detection system, or for other applications of dynamic modeling such as real-time verification of stability margins during envelope expansion tests.

Eye-tracking of visual attention in web-based assessment using the Force Concept Inventory

NASA Astrophysics Data System (ADS)

Han, Jing; Chen, Li; Fu, Zhao; Fritchman, Joseph; Bao, Lei

2017-07-01

This study used eye-tracking technology to investigate students’ visual attention while taking the Force Concept Inventory (FCI) in a web-based interface. Eighty nine university students were randomly selected into a pre-test group and a post-test group. Students took the 30-question FCI on a computer equipped with an eye-tracker. There were seven weeks of instruction between the pre- and post-test data collection. Students’ performance on the FCI improved significantly from pre-test to post-test. Meanwhile, the eye-tracking results reveal that the time students spent on taking the FCI test was not affected by student performance and did not change from pre-test to post-test. Analysis of students’ attention to answer choices shows that on the pre-test students primarily focused on the naïve choices and ignored the expert choices. On the post-test, although students had shifted their primary attention to the expert choices, they still kept a high level of attention to the naïve choices, indicating significant conceptual mixing and competition during problem solving. Outcomes of this study provide new insights on students’ conceptual development in learning physics.

Knowledge assistant: A sensor fusion framework for robotic environmental characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feddema, J.T.; Rivera, J.J.; Tucker, S.D.

1996-12-01

A prototype sensor fusion framework called the {open_quotes}Knowledge Assistant{close_quotes} has been developed and tested on a gantry robot at Sandia National Laboratories. This Knowledge Assistant guides the robot operator during the planning, execution, and post analysis stages of the characterization process. During the planning stage, the Knowledge Assistant suggests robot paths and speeds based on knowledge of sensors available and their physical characteristics. During execution, the Knowledge Assistant coordinates the collection of data through a data acquisition {open_quotes}specialist.{close_quotes} During execution and post analysis, the Knowledge Assistant sends raw data to other {open_quotes}specialists,{close_quotes} which include statistical pattern recognition software, a neuralmore » network, and model-based search software. After the specialists return their results, the Knowledge Assistant consolidates the information and returns a report to the robot control system where the sensed objects and their attributes (e.g. estimated dimensions, weight, material composition, etc.) are displayed in the world model. This paper highlights the major components of this system.« less

Models accounting for intention-behavior discordance in the physical activity domain: a user's guide, content overview, and review of current evidence.

PubMed

Rhodes, Ryan E; Yao, Christopher A

2015-02-07

There is a growing concern among researchers with the limited effectiveness and yet subsequent stagnation of theories applied to physical activity (PA). One of the most highlighted areas of concern is the established gap between intention and PA, yet the considerable use of models that assume intention is the proximal antecedent of PA. The objective of this review was to: 1) provide a guide and thematic analysis of the available models that include constructs that address intention-behavior discordance and 2) highlight the evidence for these structures in the PA domain. A literature search was conducted among 13 major databases to locate relevant models and PA studies published before August 2014. Sixteen models were identified and nine overall themes for post-intentional constructs were created. Of the 16 models, eight were applied to 36 PA studies. Early evidence supported maintenance self-efficacy, behavioral regulation strategies, affective judgments, perceived control/opportunity, habit, and extraversion as reliable predictors of post-intention PA. Several intention-behavior discordance models exist within the literature, but are not used frequently. Further efforts are needed to test these models, preferably with experimental designs.

Spatially resolved regression analysis of pre-treatment FDG, FLT and Cu-ATSM PET from post-treatment FDG PET: an exploratory study

PubMed Central

Bowen, Stephen R; Chappell, Richard J; Bentzen, Søren M; Deveau, Michael A; Forrest, Lisa J; Jeraj, Robert

2012-01-01

Purpose To quantify associations between pre-radiotherapy and post-radiotherapy PET parameters via spatially resolved regression. Materials and methods Ten canine sinonasal cancer patients underwent PET/CT scans of [18F]FDG (FDGpre), [18F]FLT (FLTpre), and [61Cu]Cu-ATSM (Cu-ATSMpre). Following radiotherapy regimens of 50 Gy in 10 fractions, veterinary patients underwent FDG PET/CT scans at three months (FDGpost). Regression of standardized uptake values in baseline FDGpre, FLTpre and Cu-ATSMpre tumour voxels to those in FDGpost images was performed for linear, log-linear, generalized-linear and mixed-fit linear models. Goodness-of-fit in regression coefficients was assessed by R2. Hypothesis testing of coefficients over the patient population was performed. Results Multivariate linear model fits of FDGpre to FDGpost were significantly positive over the population (FDGpost~0.17 FDGpre, p=0.03), and classified slopes of RECIST non-responders and responders to be different (0.37 vs. 0.07, p=0.01). Generalized-linear model fits related FDGpre to FDGpost by a linear power law (FDGpost~FDGpre0.93, p<0.001). Univariate mixture model fits of FDGpre improved R2 from 0.17 to 0.52. Neither baseline FLT PET nor Cu-ATSM PET uptake contributed statistically significant multivariate regression coefficients. Conclusions Spatially resolved regression analysis indicates that pre-treatment FDG PET uptake is most strongly associated with three-month post-treatment FDG PET uptake in this patient population, though associations are histopathology-dependent. PMID:22682748

Effects of Training on Knowledge, Attitude and Practices of Malaria Prevention and Control among Community Role Model Care Givers in South Western Nigeria.

PubMed

Olalekan, Adebimpe W; Adebukola, Adebimpe M

2015-10-01

Malaria is endemic in Nigeria, with significant records of mortality and morbidity. Adequate community involvement is central to a successful implementation of malaria control programs. This study assessed the effects of a training programme on knowledge of malaria prevention and control among community role model care givers. A descriptive cross sectional study of a pre-and post-test design method was conducted among 400 eligible community members in Osun State. Training was given in the form of organized lectures, health education and practical demonstration sessions. Scores of pre-test and post-test conducted after four months interval were compared. Multistage sampling method was adopted in selecting study participants, while data was analyzed using the SPSS software version 17.0. Mean age was 43.8 (±1.4) years. Average knowledge score of cause, transmission, risk factors and consequences, awareness of common symptoms and preventive practices improved during post-training test when compared with pr-training test. The overall descriptive mean knowledge score in pre-test and post-test were 2.1 and 3.5 respectively out of an average maximum score of 5.0, giving an increment of 66.7%. Role model care givers with formal education were twice and three times more likely to know about disease 'transmission' (OR 1.9, 95%CI 0.11-0.19, p=0.002) and 'consequences' (OR 2.9, 95%CI 0.25-0.65, p=0.040) respectively compared to those without formal education. Training on malaria improved the knowledge of malaria prevention and control among role model community care givers towards a successful implementation of malaria control programmes.

Finite element modelling of creep crack growth in 316 stainless and 9Cr-1Mo steels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krishnaswamy, P.; Brust, F.W.

1994-09-01

The failure behavior of steels under sustained and cyclic loads has been addressed. The constitutive behavior of the two steels have been represented by the conventional strain-hardening law and the Murakami-Ohno model for reversed and cyclic loads. The laws have been implemented into the research finite element code FVP. Post processors for FVP to calculate various path independent integral fracture parameters have been written. Compact tension C(T) specimens have been tested under sustained and cyclic loads with both the load point displacement and crack growth monitored during the tests. FE models with extremely refined meshes for the C(T) specimens weremore » prepared and the experiment simulated numerically. Results from this analysis focus on the differences between the various constitutive models as well as the fracture parameters in characterizing the creep crack growth of the two steels.« less

Application of High Speed Digital Image Correlation in Rocket Engine Hot Fire Testing

NASA Technical Reports Server (NTRS)

Gradl, Paul R.; Schmidt, Tim

2016-01-01

Hot fire testing of rocket engine components and rocket engine systems is a critical aspect of the development process to understand performance, reliability and system interactions. Ground testing provides the opportunity for highly instrumented development testing to validate analytical model predictions and determine necessary design changes and process improvements. To properly obtain discrete measurements for model validation, instrumentation must survive in the highly dynamic and extreme temperature application of hot fire testing. Digital Image Correlation has been investigated and being evaluated as a technique to augment traditional instrumentation during component and engine testing providing further data for additional performance improvements and cost savings. The feasibility of digital image correlation techniques were demonstrated in subscale and full scale hotfire testing. This incorporated a pair of high speed cameras to measure three-dimensional, real-time displacements and strains installed and operated under the extreme environments present on the test stand. The development process, setup and calibrations, data collection, hotfire test data collection and post-test analysis and results are presented in this paper.

Defining the Pathophysiological Role of Tau in Experimental TBI

DTIC Science & Technology

2017-10-01

clinically a blood test for improving the diagnosis of TBI-induced chronic neurodegenerative disease in the long-term post -injury time period. The...we will complete the quantitative analysis of perforant pathway synapse integrity in all 63 long-term post -injury cases. Our results thus far support...substantiated by quantitative analysis of NeuN-positive neuronal density in lateral entorhinal cortex layer II at 4 months post -injury (Table 1). At

Spectral analysis software improves confidence in plant and soil water stable isotope analyses performed by isotope ratio infrared spectroscopy (IRIS).

PubMed

West, A G; Goldsmith, G R; Matimati, I; Dawson, T E

2011-08-30

Previous studies have demonstrated the potential for large errors to occur when analyzing waters containing organic contaminants using isotope ratio infrared spectroscopy (IRIS). In an attempt to address this problem, IRIS manufacturers now provide post-processing spectral analysis software capable of identifying samples with the types of spectral interference that compromises their stable isotope analysis. Here we report two independent tests of this post-processing spectral analysis software on two IRIS systems, OA-ICOS (Los Gatos Research Inc.) and WS-CRDS (Picarro Inc.). Following a similar methodology to a previous study, we cryogenically extracted plant leaf water and soil water and measured the δ(2)H and δ(18)O values of identical samples by isotope ratio mass spectrometry (IRMS) and IRIS. As an additional test, we analyzed plant stem waters and tap waters by IRMS and IRIS in an independent laboratory. For all tests we assumed that the IRMS value represented the "true" value against which we could compare the stable isotope results from the IRIS methods. Samples showing significant deviations from the IRMS value (>2σ) were considered to be contaminated and representative of spectral interference in the IRIS measurement. Over the two studies, 83% of plant species were considered contaminated on OA-ICOS and 58% on WS-CRDS. Post-analysis, spectra were analyzed using the manufacturer's spectral analysis software, in order to see if the software correctly identified contaminated samples. In our tests the software performed well, identifying all the samples with major errors. However, some false negatives indicate that user evaluation and testing of the software are necessary. Repeat sampling of plants showed considerable variation in the discrepancies between IRIS and IRMS. As such, we recommend that spectral analysis of IRIS data must be incorporated into standard post-processing routines. Furthermore, we suggest that the results from spectral analysis be included when reporting stable isotope data from IRIS. Copyright © 2011 John Wiley & Sons, Ltd.

Stationarity test with a direct test for heteroskedasticity in exchange rate forecasting models

NASA Astrophysics Data System (ADS)

Khin, Aye Aye; Chau, Wong Hong; Seong, Lim Chee; Bin, Raymond Ling Leh; Teng, Kevin Low Lock

2017-05-01

Global economic has been decreasing in the recent years, manifested by the greater exchange rates volatility on international commodity market. This study attempts to analyze some prominent exchange rate forecasting models on Malaysian commodity trading: univariate ARIMA, ARCH and GARCH models in conjunction with stationarity test on residual diagnosis direct testing of heteroskedasticity. All forecasting models utilized the monthly data from 1990 to 2015. Given a total of 312 observations, the data used to forecast both short-term and long-term exchange rate. The forecasting power statistics suggested that the forecasting performance of ARIMA (1, 1, 1) model is more efficient than the ARCH (1) and GARCH (1, 1) models. For ex-post forecast, exchange rate was increased from RM 3.50 per USD in January 2015 to RM 4.47 per USD in December 2015 based on the baseline data. For short-term ex-ante forecast, the analysis results indicate a decrease in exchange rate on 2016 June (RM 4.27 per USD) as compared with 2015 December. A more appropriate forecasting method of exchange rate is vital to aid the decision-making process and planning on the sustainable commodities' production in the world economy.

The structure of evaporating and combusting sprays: Measurements and predictions

NASA Technical Reports Server (NTRS)

Shuen, J. S.; Solomon, A. S. P.; Faeth, G. M.

1984-01-01

An apparatus developed, to allow observations of monodisperse sprays, consists of a methane-fueled turbulent jet diffusion flame with monodisperse methanol drops injected at the burner exit. Mean and fluctuating-phase velocities, drop sizes, drop-mass fluxes and mean-gas temperatures were measured. Initial drop diameters of 100 and 180 microns are being considered in order to vary drop penetration in the flow and effects of turbulent dispersion. Baseline tests of the burner flame with no drops present were also conducted. Calibration tests, needed to establish methods for predicting drop transport, involve drops supported in the post-flame region of a flat-flame burner operated at various mixture ratios. Spray models which are being evaluated include: (1) locally homogeneous flow (LFH) analysis, (2) deterministic separated flow (DSF) analysis and (3) stochastic separated flow (SSF) analysis.

49 CFR 535.7 - Averaging, banking, and trading (ABT) program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... procedures of 40 CFR part 1065 or using the post-transmission test procedures. (2) Post-transmission hybrid...) Averaging. Averaging is the exchange of FCC among a manufacturer's engines or vehicle families or test... expiration date of five model years after the year in which the credits are earned. For example, credits...

A biomechanical comparison of three sternotomy closure techniques.

PubMed

Cohen, David J; Griffin, Lanny V

2002-02-01

A biomechanical study of three sternotomy closure techniques (figure-of-eight stainless-steel wires, Pectofix Dynamic Sternal Fixation [DSF] stainless-steel plates, and figure-of-eight stainless-steel cables) was conducted to compare strength and stiffness variables in three clinically relevant loading modes (anterior-posterior shear, longitudinal shear, and lateral distraction). All tests were conducted on polyurethane foam sternal models that simulate the properties of cancellous bone. Each model was divided longitudinally and reconstructed using one of the sternotomy closure repair techniques. Tests were performed using a materials testing system that applies a continuously increasing amount of force in one direction to the model until it catastrophically breaks. A total of six trials of each fixation type in each of three test groups were prepared and tested, for a total of 54 tests. Strength and stiffness variables as well as a post-yield analysis of failure were evaluated. Sternums repaired using the DSF plate system are a more rigid construct than sternums repaired using the stainless-steel wires or cables in the distraction and transverse shear modes and they are not significantly different from sternums repaired with wires or cables in the longitudinal shear mode. The DSF plate system offers a 25% improvement in resistance to failure (yield) compared to wires when a transverse shear force is applied to the model. The cable system had a higher resistance to failure than the wires in all modes although the differences were not statistically significant. Additionally, the DSF plate system provides substantial reduction of the implant's cutting into the sternal model under loading as evidenced by the post-yield displacement when compared with either cables or wires for the distraction and longitudinal shear modes. For the transverse shear mode, the cables or wires would completely fail at the load for which cutting begins for the DSF. Both the DSF plate system and the stainless-steel cable system offer important advantages over figure-of-eight wire for sternal closure.

Multi-modality optical imaging of ovarian cancer in a post-menopausal mouse model

NASA Astrophysics Data System (ADS)

Watson, Jennifer M.; Rice, Photini Faith; Marion, Samuel L.; Bentley, David L.; Brewer, Molly A.; Utzinger, Urs; Hoyer, Patricia B.; Barton, Jennifer K.

2011-03-01

Our goal is to use optical imaging to detect cancer development on the sub cellular scale. By determining the microscopic changes that precede ovarian cancer we hope to develop a minimally invasive screening test for high risk patients. A mouse ovarian cancer model has been developed by treating mice with 4-Vinylcyclohexene Diepoxide to induce ovarian failure and 7, 12-Dimethylbenz[a]anthracene (DMBA) to induce ovarian cancer. Using optical coherence tomography (OCT) and multiphoton microscopy (MPM) we have obtained co-registered en face images of sixty-seven mouse ovaries ex vivo and forty-two ovaries in vivo. Preliminary analysis indicates that OCT and MPM can visualize ovarian microstructure. During the next year we will be completing a long term survival study using post-menopausal mice that have been treated with DMBA to induce cancer and imaged in vivo at time points before and after treatment.

3D-Finite element analysis of molars restored with endocrowns and posts during masticatory simulation.

PubMed

Dejak, Beata; Młotkowski, Andrzej

2013-12-01

The objective was to compare equivalent stresses in molars restored with endocrowns as well as posts and cores during masticatory simulation using finite element analysis. Four three-dimensional models of first mandibular molars were created: A - intact tooth; B - tooth restored by ceramic endocrown; C - tooth with FRC posts, composite core and ceramic crown; D - tooth with cast post and ceramic crown. The study was performed using finite element analysis, with contact elements. The computer simulations of mastication were conducted. The equivalent stresses of modified von Mises failure criterion (mvM) in models were calculated, Tsai-Wu index for FRC post was determinate. Maximal values of the stresses in the ceramic, cement and dentin were compared between models and to strength of the materials. Contact stresses in the cement-tissue adhesive interface around restorations were considered as well. During masticatory simulation, the lowest mvM stresses in dentin arisen in molar restored with endocrown (Model B). Maximal mvM stress values in structures of restored molar were 23% lower than in the intact tooth. The mvM stresses in the endocrown did not exceed the tensile strength of ceramic. In the molar with an FRC posts (Model C), equivalent stress values in dentin increased by 42% versus Model B. In ceramic crown of Model C the stresses were 31% higher and in the resin luting cement were 61% higher than in the tooth with endocrown. Tensile contact stresses in the adhesive cement-dentin interface around FRC posts achieved 4 times higher values than under endocrown and shear stresses increased twice. The contact stress values around the appliances were several time smaller than cement-dentin bond strength. Teeth restored by endocrowns are potentially more resistant to failure than those with FRC posts. Under physiological loads, ceramic endocrowns ideally cemented in molars should not be demaged or debonded. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

3D-Printed specimens as a valuable tool in anatomy education: A pilot study.

PubMed

Garas, Monique; Vaccarezza, Mauro; Newland, George; McVay-Doornbusch, Kylie; Hasani, Jamila

2018-06-06

Three-dimensional (3D) printing is a modern technique of creating 3D-printed models that allows reproduction of human structures from MRI and CT scans via fusion of multiple layers of resin materials. To assess feasibility of this innovative resource as anatomy educational tool, we conducted a preliminary study on Curtin University undergraduate students to investigate the use of 3D models for anatomy learning as a main goal, to assess the effectiveness of different specimen types during the sessions and personally preferred anatomy learning tools among students as secondary aim. The study consisted of a pre-test, exposure to test (anatomical test) and post-test survey. During pre-test, all participants (both without prior experience and experienced groups) were given a brief introduction on laboratory safety and study procedure thus participants were exposed to 3D, wet and plastinated specimens of the heart, shoulder and thigh to identify the pinned structures (anatomical test). Then, participants were provided a post-test survey containing five questions. In total, 23 participants completed the anatomical test and post-test survey. A larger number of participants (85%) achieved right answers for 3D models compared to wet and plastinated materials, 74% of population selected 3D models as the most usable tool for identification of pinned structures and 45% chose 3D models as their preferred method of anatomy learning. This preliminary small-size study affirms the feasibility of 3D-printed models as a valuable asset in anatomy learning and shows their capability to be used adjacent to cadaveric materials and other widely used tools in anatomy education. Copyright © 2018 Elsevier GmbH. All rights reserved.

The Retention of Geologic Misconceptions: Alternative Ideas That Persist After Instruction

NASA Astrophysics Data System (ADS)

Wandersee, J. H.; Clary, R. M.; Anderson, S. W.; Libarkin, J.

2003-12-01

We used a 30 item multiple-choice instrument called the geoscience concept test (GCT) to study learning in introductory college-level science courses. The GCT uses common misconceptions as wrong answers, and allows us to pre- and post-test individual courses to gauge the effectiveness of instruction. The GCT was given at the beginning of the semester to 2215 college students in 42 classes at 32 different institutions in 19 different states (21 public and 6 private four-year institutions, 4 community colleges, and one tribal college). The pilot was also given to 1907 students as a semester-end post-test in 30 different classes. We were able to match pre- and post-test results for 967 students through an analysis of volunteered personal and demographic data. Although statistical analysis shows that learning occurred in all classes, closer inspection of the data show that the student population retained a number of misconceptions. Students retained several incorrect ideas relating to geologic time despite instruction. For example, 71% of post-tested students believe that the study of fossils, rock layers, or carbon is the most accurate means for calculating the age of the Earth. Nearly 25% of students believed that dinosaurs only existed on Earth for 500,000 years, and 40% believe dinosaurs came into existence about halfway through the geologic time scale. Many alternative ideas about plate tectonics and the formation of rocks also existed after instruction. Nearly half of the post-tested students (47%) believed that tectonic plates do not extend all way to the surface of the Earth, and 65% did not believe that animals could form oceanic rocks. Identification of strongly held misconceptions in a post-tested student population provides instructors with information that could impact the way they present material to their introductory classes.

Factors that influence exercise activity among women post hip fracture participating in the Exercise Plus Program.

PubMed

Resnick, Barbara; Orwig, Denise; D'Adamo, Christopher; Yu-Yahiro, Janet; Hawkes, William; Shardell, Michelle; Golden, Justine; Zimmerman, Sheryl; Magaziner, Jay

2007-01-01

Using a social ecological model, this paper describes selected intra- and interpersonal factors that influence exercise behavior in women post hip fracture who participated in the Exercise Plus Program. Model testing of factors that influence exercise behavior at 2, 6 and 12 months post hip fracture was done. The full model hypothesized that demographic variables; cognitive, affective, physical and functional status; pain; fear of falling; social support for exercise, and exposure to the Exercise Plus Program would influence self-efficacy, outcome expectations, and stage of change both directly and indirectly influencing total time spent exercising. Two hundred and nine female hip fracture patients (age 81.0 +/- 6.9), the majority of whom were Caucasian (97%), participated in this study. The three predictive models tested across the 12 month recovery trajectory suggest that somewhat different factors may influence exercise over the recovery period and the models explained 8 to 21% of the variance in time spent exercising. To optimize exercise activity post hip fracture, older adults should be helped to realistically assess their self-efficacy and outcome expectations related to exercise, health care providers and friends/peers should be encouraged to reinforce the positive benefits of exercise post hip fracture, and fear of falling should be addressed throughout the entire hip fracture recovery trajectory.

LDSD POST2 Modeling Enhancements in Support of SFDT-2 Flight Operations

NASA Technical Reports Server (NTRS)

White, Joseph; Bowes, Angela L.; Dutta, Soumyo; Ivanov, Mark C.; Queen, Eric M.

2016-01-01

Program to Optimize Simulated Trajectories II (POST2) was utilized to develop trajectory simulations characterizing all flight phases from drop to splashdown for the Low-Density Supersonic Decelerator (LDSD) project's first and second Supersonic Flight Dynamics Tests (SFDT-1 and SFDT-2) which took place June 28, 2014 and June 8, 2015, respectively. This paper describes the modeling improvements incorporated into the LDSD POST2 simulations since SFDT-1 and presents how these modeling updates affected the predicted SFDT-2 performance and sensitivity to the mission design. The POST2 simulation flight dynamics support during the SFDT-2 launch, operations, and recovery is also provided.

Treatment of post-myocardial infarction depressive disorder: a randomized, placebo-controlled trial with mirtazapine.

PubMed

Honig, Adriaan; Kuyper, Astrid M G; Schene, Aart H; van Melle, Joost P; de Jonge, Peter; Tulner, Dorien M; Schins, Annique; Crijns, Harry J G M; Kuijpers, Petra M J C; Vossen, Helen; Lousberg, Richel; Ormel, Johan

2007-01-01

To examine the antidepressant efficacy of a dual-acting antidepressant (mirtazapine) in patients with post-myocardial infarction (MI) depressive disorder. Antidepressants used in post MI trials with a randomized, double-blind, placebo-controlled design have been restricted to selective serotonin reuptake inhibitors (SSRIs). Antidepressant effects have been limited. In a prospective multicenter study, 2177 patients with MI were evaluated for depressive disorder during the first year post MI. Ninety-one patients who met the Diagnostic and Statistical Manual of Mental Disorders, 4th Edition (DSM-IV) criteria for major or minor depressive disorder were randomized to a 24-week, double-blind, placebo-controlled trial. Antidepressant efficacy was tested using last-observation-carried-forward procedure and repeated measurements analysis using the SPPS mixed models approach, with as primary outcome reduction in depressive symptomatology on the 17-item Hamilton-Depression Rating Scale (Ham-D), and secondary outcomes the Beck Depression Inventory (BDI) and depression subscale of the Symptom Check List 90 items (dSCL-90) as well as the Clinical Global Impression (CGI) scale. Using the "last observation carried forward" (LOCF) method, mirtazapine did not show to be superior to placebo on the Ham-D, but did on the BDI, dSCL-90, and CGI scale over the acute treatment phase of 8 weeks (n = 91). Using mixed models analysis over the entire 24 weeks of treatment (n = 40), we did find a significant difference favoring mirtazapine to placebo on the Ham-D, BDI, and CGI, but on the dSCL-90, this difference was not significant. This trial shows efficacy of mirtazapine on primary and secondary depression measures. Mirtazapine seems to be safe in the treatment of post-MI depression.

Ex vivo kinematic studies of a canine unlinked semi-constrained hybrid total elbow arthroplasty system.

PubMed

Lorenz, N D; Channon, S; Pettitt, R; Smirthwaite, P; Innes, J F

2015-01-01

Introduction of the Sirius® canine total elbow arthroplasty system, and presentation of the results of a passive range-of-motion analysis based on ex vivo kinematic studies pre-and post-implantation. Thoracic limbs (n = 4) of medium sized dogs were harvested by forequarter amputation. Plain orthogonal radiographs of each limb were obtained pre- and post-implantation. Limbs were prepared by placement of external fixator pins and Kirschner wires into the humerus and radius. Each limb was secured into a custom-made box frame and retro-reflective markers were placed on the exposed ends of the pins and wires. Each elbow was manually moved through five ranges-of-motion manoeuvres. Data collected included six trials of i) full extension to full flexion and ii) pronation and supination in 90° flexion; a three-dimensional motion capture system was used to collect and analyse the data. The Sirius elbow prosthesis was subsequently implanted and the same measurements were repeated. Data sets were tested for normality. Paired t-tests were used for comparison of pre- and post-implantation motion parameters. Kinematic analysis showed that the range-of-motion (mean and SD) for flexion and extension pre-implantation was 115° ± 6 (range: 25° to 140°). The range-of-motion in the sagittal plane post-implantation was 90° ± 4 (range: 36° to 130°) and this reduction was significant (p = 0.0001). The ranges-of-motion (mean and SD) for supination and pronation at 90° were 50° ± 5, whereas the corresponding mean ranges-of-motion post-implantation were 38° ± 6 (p = 0.0188). Compared to a normal elbow, the range-of-motion was reduced. Post-implantation, supination and pronation range-of-motion was significantly reduced at 90° over pre-implantation values. These results provide valuable information regarding the effect of the Sirius system on ex vivo kinematics of the normal canine elbow joint. Further, this particular ex vivo model allowed for satisfactory and repeatable kinematic analysis.

Modeling neuroendocrine stress reactivity in salivary cortisol: adjusting for peak latency variability.

PubMed

Lopez-Duran, Nestor L; Mayer, Stefanie E; Abelson, James L

2014-07-01

In this report, we present growth curve modeling (GCM) with landmark registration as an alternative statistical approach for the analysis of time series cortisol data. This approach addresses an often-ignored but critical source of variability in salivary cortisol analyses: individual and group differences in the time latency of post-stress peak concentrations. It allows for the simultaneous examination of cortisol changes before and after the peak while controlling for timing differences, and thus provides additional information that can help elucidate group differences in the underlying biological processes (e.g., intensity of response, regulatory capacity). We tested whether GCM with landmark registration is more sensitive than traditional statistical approaches (e.g., repeated measures ANOVA--rANOVA) in identifying sex differences in salivary cortisol responses to a psychosocial stressor (Trier Social Stress Test--TSST) in healthy adults (mean age 23). We used plasma ACTH measures as our "standard" and show that the new approach confirms in salivary cortisol the ACTH finding that males had longer peak latencies, higher post-stress peaks but a more intense post-peak decline. This finding would have been missed if only saliva cortisol was available and only more traditional analytic methods were used. This new approach may provide neuroendocrine researchers with a highly sensitive complementary tool to examine the dynamics of the cortisol response in a way that reduces risk of false negative findings when blood samples are not feasible.

Registered nurses' medication management of the elderly in aged care facilities.

PubMed

Lim, L M; Chiu, L H; Dohrmann, J; Tan, K-L

2010-03-01

Data on adverse drug reactions (ADRs) showed a rising trend in the elderly over 65 years using multiple medications. To identify registered nurses' (RNs) knowledge of medication management and ADRs in the elderly in aged care facilities; evaluate an education programme to increase pharmacology knowledge and prevent ADRs in the elderly; and develop a learning programme with a view to extending provision, if successful. This exploratory study used a non-randomized pre- and post-test one group quasi-experimental design without comparators. It comprised a 23-item knowledge-based test questionnaire, one-hour teaching session and a self-directed learning package. The volunteer sample was RNs from residential aged care facilities, involved in medication management. Participants sat a pre-test immediately before the education, and post-test 4 weeks later (same questionnaire). Participants' perceptions obtained. Pre-test sample n = 58, post-test n = 40, attrition rate of 31%. Using Microsoft Excel 2000, descriptive statistical data analysis of overall pre- and post-test incorrect responses showed: pre-test proportion of incorrect responses = 0.40; post-test proportion of incorrect responses = 0.27; Z-test comparing pre- and post-tests scores of incorrect responses = 6.55 and one-sided P-value = 2.8E-11 (P < 0.001). Pre-test showed knowledge deficits in medication management and ADRs in the elderly; post-test showed statistically significant improvement in RNs' knowledge. It highlighted a need for continuing professional education. Further studies are required on a larger sample of RNs in other aged care facilities, and on the clinical impact of education by investigating nursing practice and elderly residents' outcomes.

78 FR 54835 - Air Quality Implementation Plan; Alabama; Attainment Plan for the Troy Area 2008 Lead...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-06

... input options commensurate with the Regulatory Modeling Guidance. Perform current and post control.... Table 2--Post-Control Modeling Results \\4\\ Sanders lead facility Max 3-mth Background Total Year maximum...\\ (Facility MET data). The post-control analysis resulted in a predicted impact of 0.15 [mu]g/m\\3\\ (NWS MET...

The Stability of Post Hoc Model Modifications in Covariance Structure Models.

ERIC Educational Resources Information Center

Hutchinson, Susan R.

The work of R. MacCallum et al. (1992) was extended by examining chance modifications through a Monte Carlo simulation. The stability of post hoc model modifications was examined under varying sample size, model complexity, and severity of misspecification using 2- and 4-factor oblique confirmatory factor analysis (CFA) models with four and eight…

Development of Constraint Force Equation Methodology for Application to Multi-Body Dynamics Including Launch Vehicle Stage Seperation

NASA Technical Reports Server (NTRS)

Pamadi, Bandu N.; Toniolo, Matthew D.; Tartabini, Paul V.; Roithmayr, Carlos M.; Albertson, Cindy W.; Karlgaard, Christopher D.

2016-01-01

The objective of this report is to develop and implement a physics based method for analysis and simulation of multi-body dynamics including launch vehicle stage separation. The constraint force equation (CFE) methodology discussed in this report provides such a framework for modeling constraint forces and moments acting at joints when the vehicles are still connected. Several stand-alone test cases involving various types of joints were developed to validate the CFE methodology. The results were compared with ADAMS(Registered Trademark) and Autolev, two different industry standard benchmark codes for multi-body dynamic analysis and simulations. However, these two codes are not designed for aerospace flight trajectory simulations. After this validation exercise, the CFE algorithm was implemented in Program to Optimize Simulated Trajectories II (POST2) to provide a capability to simulate end-to-end trajectories of launch vehicles including stage separation. The POST2/CFE methodology was applied to the STS-1 Space Shuttle solid rocket booster (SRB) separation and Hyper-X Research Vehicle (HXRV) separation from the Pegasus booster as a further test and validation for its application to launch vehicle stage separation problems. Finally, to demonstrate end-to-end simulation capability, POST2/CFE was applied to the ascent, orbit insertion, and booster return of a reusable two-stage-to-orbit (TSTO) vehicle concept. With these validation exercises, POST2/CFE software can be used for performing conceptual level end-to-end simulations, including launch vehicle stage separation, for problems similar to those discussed in this report.

Post-Test Inspection of NASA's Evolutionary Xenon Thruster Long-Duration Test Hardware: Discharge Chamber

NASA Technical Reports Server (NTRS)

Shastry, Rohit; Soulas, George C.

2016-01-01

The NEXT Long-Duration Test is part of a comprehensive thruster service life assessment intended to demonstrate overall throughput capability, validate service life models, quantify wear rates as a function of time and operating condition, and identify any unknown life-limiting mechanisms. The test was voluntarily terminated in February 2014 after demonstrating 51,184 hours of high-voltage operation, 918 kg of propellant throughput, and 35.5 MN-s of total impulse. The post-test inspection of the thruster hardware began shortly afterwards with a combination of non-destructive and destructive analysis techniques, and is presently nearing completion. This paper presents relevant results of the post-test inspection for the discharge chamber as well as other miscellaneous components such as the high-voltage propellant isolators and electrical cabling. Comparison of magnetic field measurements taken during pretest and post-test inspections indicate that the field strength did not degrade, consistent with performance data obtained during the test. Inspection of discharge chamber mesh samples show a deposition coating primarily composed of grid material that is approximately 15 micrometers in thickness. This thickness is well within the retention capability of the mesh and is therefore not expected to present any issues. Approximately 3.1 grams of deposition flakes were found at the bottom of the discharge chamber, composed primarily of grid material and carbon. Calculated size histograms of these flakes indicate that 99% have a maximum dimension of 200 micrometers or smaller, which is significantly less than the ion optics grid gap. Larger flakes that are capable of causing a grid-to-grid short will be analyzed to determine if their formation will occur in flight or is a facility effect. The high-voltage propellant isolators as well as numerous other electrical insulators were inspected and no evidence of arcing or any other issues were found.

A Perspective on Development Flight Instrumentation and Flight Test Analysis Plans for Ares I-X

NASA Technical Reports Server (NTRS)

Huebner, Lawrence D.; Richards, James S.; Brunty, Joseph A.; Smith, R. Marshall; Trombetta, Dominic R.

2009-01-01

NASA. s Constellation Program will take a significant step toward completion of the Ares I crew launch vehicle with the flight test of Ares I-X and completion of the Ares I-X post-flight evaluation. The Ares I-X flight test vehicle is an ascent development flight test that will acquire flight data early enough to impact the design and development of the Ares I. As the primary customer for flight data from the Ares I-X mission, Ares I has been the major driver in the definition of the Development Flight Instrumentation (DFI). This paper focuses on the DFI development process and the plans for post-flight evaluation of the resulting data to impact the Ares I design. Efforts for determining the DFI for Ares I-X began in the fall of 2005, and significant effort to refine and implement the Ares I-X DFI has been expended since that time. This paper will present a perspective in the development and implementation of the DFI. Emphasis will be placed on the process by which the list was established and changes were made to that list due to imposed constraints. The paper will also discuss the plans for the analysis of the DFI data following the flight and a summary of flight evaluation tasks to be performed in support of tools and models validation for design and development.

Thermal-Mechanical Cyclic Test of a Composite Cryogenic Tank for Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Messinger, Ross; Pulley, John

2003-01-01

This viewgraph presentation provides an overview of thermal-mechanical cyclic tests conducted on a composite cryogenic tank designed for reusable launch vehicles. Topics covered include: a structural analysis of the composite cryogenic tank, a description of Marshall Space Flight Center's Cryogenic Structure Test Facility, cyclic test plans and accomplishments, burst test and analysis and post-testing evaluation.

40 CFR 90.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the values recorded. The number of events that may occur between the pre- and post-checks is not.... (9) Neither the zero drift nor the span drift between the pre-analysis and post-analysis checks on... Gaseous Exhaust Test Procedures § 90.413 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 90.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the values recorded. The number of events that may occur between the pre- and post-checks is not.... (9) Neither the zero drift nor the span drift between the pre-analysis and post-analysis checks on... Gaseous Exhaust Test Procedures § 90.413 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 90.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the values recorded. The number of events that may occur between the pre- and post-checks is not.... (9) Neither the zero drift nor the span drift between the pre-analysis and post-analysis checks on... Gaseous Exhaust Test Procedures § 90.413 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 90.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the values recorded. The number of events that may occur between the pre- and post-checks is not.... (9) Neither the zero drift nor the span drift between the pre-analysis and post-analysis checks on... Gaseous Exhaust Test Procedures § 90.413 Exhaust sample procedure—gaseous components. (a) Automatic data...

40 CFR 90.413 - Exhaust sample procedure-gaseous components.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the values recorded. The number of events that may occur between the pre- and post-checks is not.... (9) Neither the zero drift nor the span drift between the pre-analysis and post-analysis checks on... Gaseous Exhaust Test Procedures § 90.413 Exhaust sample procedure—gaseous components. (a) Automatic data...

The influence of four dual-cure resin cements and surface treatment selection to bond strength of fiber post

PubMed Central

Liu, Chang; Liu, Hong; Qian, Yue-Tong; Zhu, Song; Zhao, Su-Qian

2014-01-01

In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodontically treated and standardized post spaces were prepared. Four post pre-treatments were tested: (i) no pre-treatment (NS, control), (ii) sandblasting (SA), (iii) silanization (SI) and (iv) sandblasting followed by silanization (SS). Per pre-treatment, four dual-cure resin cements were used for luting posts: DMG LUXACORE Smartmix Dual, Multilink Automix, RelyX Unicem and Panavia F2.0. All the specimens were subjected to micro push-out test. Two-way analysis of variance and Tukey post hoc tests were performed (α=0.05) to analyze the data. Bond strength was significantly affected by the type of resin cement, and bond strengths of RelyX Unicem and Panavia F2.0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts. PMID:24177170

Preventive Effect on Post-Operative Pneumonia of Oral Health Care among Patients Who Undergo Esophageal Resection: A Multi-Center Retrospective Study.

PubMed

Soutome, Sakiko; Yanamoto, Souichi; Funahara, Madoka; Hasegawa, Takumi; Komori, Takahide; Oho, Takahiko; Umeda, Masahiro

2016-08-01

Post-operative pneumonia is a frequent and possibly fatal complication of esophagectomy and is likely caused by aspiration of oropharyngeal fluid that contains pathogenic micro-organisms. We conducted a multi-center retrospective study to investigate the preventive effect of oral health care on post-operative pneumonia among patients with esophageal cancer who underwent esophagectomy. A total of 280 patients underwent esophagectomy at three university hospitals. These patients were divided retrospectively into those who received pre-operative oral care from dentists and dental hygienists (oral care group; n = 173) and those who did not receive such care (control group; n = 107). We evaluated the correlations between the occurrence of post-operative pneumonia and 18 predictive variables (patient factors, tumor factors, treatment factors, and pre-operative oral care) using the χ(2) test and logistic regression analysis. The differences of mean hospital days and mortality rate in both groups were analyzed by the Student t-test. Age, post-operative dysphagia, and absence of pre-operative oral care were correlated significantly with post-operative pneumonia in the univariable analysis. Multivariable analysis revealed that diabetes mellitus, post-operative dysphagia, and the absence of pre-operative oral care were independent risk factors for post-operative pneumonia. The mean hospital stay and mortality rate did not differ between the oral care and control groups. Pre-operative oral care may be an effective and easy method to prevent post-operative pneumonia in patients who are undergoing esophagectomy.

Comparison of data analysis strategies for intent-to-treat analysis in pre-test-post-test designs with substantial dropout rates.

PubMed

Salim, Agus; Mackinnon, Andrew; Christensen, Helen; Griffiths, Kathleen

2008-09-30

The pre-test-post-test design (PPD) is predominant in trials of psychotherapeutic treatments. Missing data due to withdrawals present an even bigger challenge in assessing treatment effectiveness under the PPD than under designs with more observations since dropout implies an absence of information about response to treatment. When confronted with missing data, often it is reasonable to assume that the mechanism underlying missingness is related to observed but not to unobserved outcomes (missing at random, MAR). Previous simulation and theoretical studies have shown that, under MAR, modern techniques such as maximum-likelihood (ML) based methods and multiple imputation (MI) can be used to produce unbiased estimates of treatment effects. In practice, however, ad hoc methods such as last observation carried forward (LOCF) imputation and complete-case (CC) analysis continue to be used. In order to better understand the behaviour of these methods in the PPD, we compare the performance of traditional approaches (LOCF, CC) and theoretically sound techniques (MI, ML), under various MAR mechanisms. We show that the LOCF method is seriously biased and conclude that its use should be abandoned. Complete-case analysis produces unbiased estimates only when the dropout mechanism does not depend on pre-test values even when dropout is related to fixed covariates including treatment group (covariate-dependent: CD). However, CC analysis is generally biased under MAR. The magnitude of the bias is largest when the correlation of post- and pre-test is relatively low.

Analysis of the Empathic Concern Subscale of the Emotional Response Questionnaire in a Study Evaluating the Impact of a 3D Cultural Simulation.

PubMed

Everson, Naleya; Levett-Jones, Tracy; Pitt, Victoria; Lapkin, Samuel; Van Der Riet, Pamela; Rossiter, Rachel; Jones, Donovan; Gilligan, Conor; Courtney Pratt, Helen

2018-04-25

Abstract Background Empathic concern has been found to decline in health professional students. Few effective educational programs and a lack of validated scales are reported. Previous analysis of the Empathic Concern scale of the Emotional Response Questionnaire has reported both one and two latent constructs. Aim To evaluate the impact of simulation on nursing students' empathic concern and test the psychometric properties of the Empathic Concern scale. Methods The study used a one group pre-test post-test design with a convenience sample of 460 nursing students. Empathic concern was measured pre-post simulation with the Empathic Concern scale. Factor Analysis was undertaken to investigate the structure of the scale. Results There was a statistically significant increase in Empathic Concern scores between pre-simulation 5.57 (SD = 1.04) and post-simulation 6.10 (SD = 0.95). Factor analysis of the Empathic Concern scale identified one latent dimension. Conclusion Immersive simulation may promote empathic concern. The Empathic Concern scale measured a single latent construct in this cohort.

Pre- and post-drill comparison of the Mount Elbert gas hydrate prospect, Alaska North Slope

USGS Publications Warehouse

Lee, M.W.; Agena, W.F.; Collett, T.S.; Inks, T.L.

2011-01-01

In 2006, the United States Geological Survey (USGS) completed a detailed analysis and interpretation of available 2-D and 3-D seismic data, along with seismic modeling and correlation with specially processed downhole well log data for identifying potential gas hydrate accumulations on the North Slope of Alaska. A methodology was developed for identifying sub-permafrost gas hydrate prospects within the gas hydrate stability zone in the Milne Point area. The study revealed a total of 14 gas hydrate prospects in this area.In order to validate the gas hydrate prospecting protocol of the USGS and to acquire critical reservoir data needed to develop a longer-term production testing program, a stratigraphic test well was drilled at the Mount Elbert prospect in the Milne Point area in early 2007. The drilling confirmed the presence of two prominent gas-hydrate-bearing units in the Mount Elbert prospect, and high quality well logs and core data were acquired. The post-drill results indicate pre-drill predictions of the reservoir thickness and the gas-hydrate saturations based on seismic and existing well data were 90% accurate for the upper unit (hydrate unit D) and 70% accurate for the lower unit (hydrate unit C), confirming the validity of the USGS approach to gas hydrate prospecting. The Mount Elbert prospect is the first gas hydrate accumulation on the North Slope of Alaska identified primarily on the basis of seismic attribute analysis and specially processed downhole log data. Post-drill well log data enabled a better constraint of the elastic model and the development of an improved approach to the gas hydrate prospecting using seismic attributes. ?? 2009.

Engineering Students' Conceptions of the Derivative and Some Implications for Their Mathematical Education

ERIC Educational Resources Information Center

Bingolbali, E.; Monaghan, J.; Roper, T.

2007-01-01

This paper explores Mechanical Engineering students' conceptions of and preferences for conceptions of the derivative, and their views on mathematics. Data comes from pre-, post- and delayed post-tests, a preference test, interviews with students and an analysis of calculus courses. Data from Mathematics students is used to make comparisons with…

Survival of two post systems--five-year results of a randomized clinical trial.

PubMed

Schmitter, Marc; Hamadi, Khaled; Rammelsberg, Peter

2011-01-01

To assess the survival rate of two different post systems after 5 years of service with a prospective randomized controlled trial. One hundred patients in need of a post were studied. Half of the patients received long glass fiber-reinforced posts, while the other half received long metal screw posts. The posts were assigned randomly. After at least 5 years (mean, 61.37 months), follow-ups were established. When a complication occurred prior to this recall, the type and time of the complication was documented. Statistical analysis was performed using the log-rank test and Kaplan-Meier analysis. Additionally, a Cox regression was performed to analyze risk factors. The survival rate of fiber-reinforced posts was 71.8%. In the metal screw post group, the survival rate was significantly lower, 50.0% (log-rank test, P = .026). Metal posts resulted more often in more unfavorable complications (eg, root fractures); consequently, more teeth (n = 17) had to be extracted. The Cox regression identified the following risk factors: position of the tooth (anterior vs posterior teeth), degree of coronal tooth destruction, and the post system (fiber-reinforced post vs metal screw post). Fiber-reinforced restorations loosened in several patients; in some of these cases (n = 6), patients did not notice this, leading to the extraction of teeth. Long metal screw posts should be used with great care in endodontically treated teeth. Besides the selection of the post system, other factors influence the survival of the restoration.

Appropriateness of the metabolic equivalent (MET) as an estimate of exercise intensity for post-myocardial infarction patients.

PubMed

Woolf-May, Kate; Meadows, Steve

2016-01-01

To explore: (1) whether during exercise metabolic equivalents (METs) appropriately indicate the intensity and/or metabolic cost for post-myocardial infarction (MI) males and (2) whether post-exercise VO 2 parameters provide insight into the intensity and/or metabolic cost of the prior exercise. 15 male phase-IV post-MIs (64.4±6.5 years) and 16 apparently healthy males (63.0±6.4 years) participated. Participants performed a graded cycle ergometer test (CET) of 50, 75 and 100 W, followed by 10 min active recovery (at 50 W) and 22 min seated recovery. Participants' heart rate (HR, bpm), expired air parameters and ratings of perceived exertion (exercise only) were measured. General linear model analysis showed throughout significantly lower HR values in post-MI participants that were related to β-blocker medication ( F (2,5) =18.47, p<0.01), with significantly higher VCO 2 /VO 2 ( F (2,5) =11.25, p<0.001) and gross kcals/LO 2 /min ( F (2,5) =11.25, p<0.001). Analysis comparing lines of regression showed, during the CET: post-MI participants worked at higher percentage of their anaerobic threshold (%AT)/MET than controls ( F (2,90) =18.98, p<0.001), as well as during active recovery (100-50 W) ( F (2,56) =20.81, p<0.001); during seated recovery: GLM analysis showed significantly higher values of VCO 2 /VO 2 for post-MI participants compared with controls ( F (2,3) =21.48, p=0.001) as well as gross kcals/LO 2 /min ( F (2,3) =21.48, p=0.001). Since METs take no consideration of any anaerobic component, they failed to reflect the significantly greater anaerobic contribution during exercise per MET for phase-IV post-MI patients. Given the anaerobic component will be greater for those with more severe forms of cardiac disease, current METs should be used with caution when determining exercise intensity in any patient with cardiac disease.

Examining Theory-Based Behavior-Change Constructs, Social Interaction, and Sociability Features of the Weight Watchers' Online Community.

PubMed

Wang, Ye; Willis, Erin

2016-12-01

Objective To examine whether and to what extent relevant and meaningful discussions of weight loss occurred in the Weight Watchers' online community, and whether and to what extent the online community is designed for fostering such discussions. A multimethod approach was used here. First, a quantitative content analysis was conducted on 320 posts from 64 threads sampled from WeightWatchers.com's message boards between December 1, 2011, and January 31, 2012. The coding categories included constructs from the health belief model, the planned behavior theory, and the theory of self-efficacy. An acceptable level of intercoder reliability was reached; frequencies, cluster analysis, and t test were reported. Second, a conventional content analysis of the posts was conducted. The posts were examined for themes and patterns within the discussion. Finally, the researchers examined the sociability features of the message boards. The qualitative review followed established procedures and was conducted independently by four researchers. Mastery experience occurred in 46% of the posts. Threads focusing on physical activities contained more perceived barriers, mastery experiences, and verbal persuasion than other types of threads. Posts focusing on diet included unanswered questions about dieting practices with certain medical conditions. Posts focusing on mastery experience celebrated any small step toward success. Posts irrelevant to weight loss mostly contained events and happenings in members' lives. The sociability review revealed a lack of moderation. The Weight Watchers' online community included much discussion about weight loss. Findings suggest that physical activities require more encouragement than dieting. Health educators have an opportunity to interject and moderate meaningful discussions. For example, dieting with certain medical conditions, opinions on various diets, and the relationship between dieting and being healthy are opportunities to facilitate learning. Discussion posts irrelevant to weight loss help build social relationships. © 2016 Society for Public Health Education.

School Burnout and Engagement in the Context of Demands-Resources Model

ERIC Educational Resources Information Center

Salmela-Aro, Katariina; Upadyaya, Katja

2014-01-01

Background: A four-wave longitudinal study tested the demands-resources model in the school context. Aim: To examine the applicability of the demands-resources to the school context. Method: Data of 1,709 adolescents were gathered, once during the transition from comprehensive to post-comprehensive education, twice during post-comprehensive…

Influence of Iatrogenic Gaps, Cement Type, and Time on Microleakage of Cast Posts Using Spectrophotometer and Glucose Filtration Measurements.

PubMed

Al-Madi, Ebtissam M; Al-Saleh, Samar A; Al-Khudairy, Reem I; Aba-Hussein, Taibah W

2018-04-06

To determine the influence of iatrogenic gaps, type of cement, and time on microleakage of cast posts using spectrophotometer and glucose filtration measurements. Forty-eight single-rooted teeth were divided into eight groups of six teeth each. Teeth were instrumented and obturated, and a cast post was fabricated. In addition to two control groups (positive and negative), a total of six groups were prepared: In four groups, an artificial 2- to 3-mm gap was created between post and residual gutta percha (GP), and two groups were prepared with intimate contact between post and residual GP. Posts were cemented with either zinc phosphate cement or resin cement. Leakage through the post after 1, 8, 14, and 20 days was measured using a glucose penetration model with two different reading methods. Mixed analysis of variance tests were performed to analyze the data. The presence of a gap between the apical end of the post and the most coronal portion of the GP remaining in the root canal after post space preparation increased microleakage significantly. However, microleakage was significantly less when the gap was refilled with GP compared to no gap. There was no difference in leakage between luting cements used. It was concluded that none of the cements were able to prevent microleakage. However, the addition of GP to residual GP did increase the sealing ability.

Hydro-mechanical mechanism and thresholds of rainfall-induced unsaturated landslides

NASA Astrophysics Data System (ADS)

Yang, Zongji; Lei, Xiaoqin; Huang, Dong; Qiao, Jianping

2017-04-01

The devastating Ms 8 Wenchuan earthquake in 2008 created the greatest number of co-seismic mountain hazards ever recorded in China. However, the dynamics of rainfall induced mass remobilization and transport deposits after giant earthquake are not fully understood. Moreover, rainfall intensity and duration (I-D) methods are the predominant early warning indicators of rainfall-induced landslides in post-earthquake region, which are a convenient and straight-forward way to predict the hazards. However, the rainfall-based criteria and thresholds are generally empirical and based on statistical analysis,consequently, they ignore the failure mechanisms of the landslides. This study examines the mechanism and hydro-mechanical behavior and thresholds of these unsaturated deposits under the influence of rainfall. To accomplish this, in situ experiments were performed in an instrumented landslide deposit, The field experimental tests were conducted on a natural co-seismic fractured slope to 1) simulate rainfall-induced shallow failures in the depression channels of a debris flow catchment in an earthquake-affected region, 2)explore the mechanisms and transient processes associated with hydro-mechanical parameter variations in response to the infiltration of rainfall, and 3) identify the hydrologic parameter thresholds and critical criteria of gravitational erosion in areas prone to mass remobilization as a source of debris flows. These experiments provided instrumental evidence and directly proved that post-earthquake rainfall-induced mass remobilization occurred under unsaturated conditions in response to transient rainfall infiltration, and revealed the presence of transient processes and the dominance of preferential flow paths during rainfall infiltration. A hydro-mechanical method was adopted for the transient hydrologic process modelling and unsaturated slope stability analysis. and the slope failures during the experimental test were reproduced by the model, indicating that the decrease in matrix suction and increase in moisture content in response to rainfall infiltration contributed greatly to post-earthquake shallow mass movement. Thus, a threshold model for the initiation of mass remobilization is proposed based on correlations between slope stability and volumetric water content and matrix suction As a complement to rainfall-based early warning strategies, the water content and suction threshold models based on the water infiltration induced slope failure mechanism. the proposed method are expected to improve the accuracy of prediction and early warnings of post-earthquake mountain hazards

Pre-test and post-test evaluation of students' perceptions of a collaborative clinical education model on the learning environment.

PubMed

Henderson, Amanda; Heel, Alison; Twentyman, Michelle; Lloyd, Belinda

2006-01-01

This study investigated the impact of a collaborative clinical education model on students' perception of the psycho-social learning environment. A pre-test and post-test quasi experimental design. A tertiary referral centre. Second and third year undergraduate nursing students were asked to rate their perceptions of the psycho-social learning environment at the completion of the clinical practicum. TOOL: The tool used to measure psycho-social perceptions of the clinical learning environment was the Clinical Learning Environment Inventory previously validated in Australian health care contexts. A collaborative arrangement with the university and ward staff where eight students are placed on a ward and a ward staff member is paid by the university to be 'off-line' from a clinical workload to supervise the students. This is in contrast to the standard facilitation model where students are placed with registered nurses in different localities under the supervision of a 'roving' registered nurse paid by the university. No significant differences were found in pre-test mean scores when comparing wards. Significant differences in post-test scores for the intervention group were identified in the sub scales of Student Involvement, Satisfaction, Personalisation and Task Orientation. The adoption of a collaborative clinical education model where students are integrated into the ward team and the team is responsible for student learning can positively enhance capacity for student learning during their clinical practicum.

TIGER: A data analysis pipeline for testing the strong-field dynamics of general relativity with gravitational wave signals from coalescing compact binaries

NASA Astrophysics Data System (ADS)

Agathos, M.; Del Pozzo, W.; Li, T. G. F.; Van Den Broeck, C.; Veitch, J.; Vitale, S.

2014-04-01

The direct detection of gravitational waves with upcoming second-generation gravitational wave observatories such as Advanced LIGO and Advanced Virgo will allow us to probe the genuinely strong-field dynamics of general relativity (GR) for the first time. We have developed a data analysis pipeline called TIGER (test infrastructure for general relativity), which uses signals from compact binary coalescences to perform a model-independent test of GR. In this paper we focus on signals from coalescing binary neutron stars, for which sufficiently accurate waveform models are already available which can be generated fast enough on a computer that they can be used in Bayesian inference. By performing numerical experiments in stationary, Gaussian noise, we show that for such systems, TIGER is robust against a number of unmodeled fundamental, astrophysical, and instrumental effects, such as differences between waveform approximants, a limited number of post-Newtonian phase contributions being known, the effects of neutron star tidal deformability on the orbital motion, neutron star spins, and instrumental calibration errors.

Effects of NaOCl, EDTA and MTAD when applied to dentine on stress distribution in post-restored roots with flared canals.

PubMed

Belli, S; Eraslan, O; Eraslan, O; Eskitascioglu, M; Eskitascioglu, G

2014-12-01

To evaluate the effect of NaOCl, EDTA and MTAD on the stress distribution and levels in roots with flared canals and three different aesthetic post systems using finite element stress analysis (FEA). Three-dimensional (3D) FEA models simulating a maxillary incisor with excessive structural loss and flared root canals were created. The dentine of the first models of each post group was assumed as homogenous, whereas the others were deemed as having their elastic modulus affected up to 100 μm deep as a result of irrigation protocol (5.25 NaOCl, 17% EDTA and MTAD for 2 h). A sound incisor tooth model was used as the control. Restorations were created according to the post system used (pre-fabricated fibre post (PFP)), polyethylene fibre (Ribbond) post and core build-up (RBP), and one-piece milled zirconia post and core (ZP). Ceramic crowns were added to the models. A 300-N static load was applied at the centre of the palatal surface of the models to calculate the stress distributions. The SolidWorks/Cosmosworks structural analysis programmes were used for FEA analysis. Results were presented by considering von Mises criteria. The analysis of the von Mises stresses revealed that RBP created less stress in the remaining root dentine when compared to PFP and ZP. ZP maintained the stresses inside its body and reduced stress on the palatal surface of the root; however, it forwarded more stress towards the apical area. NaOCl-, EDTA- and MTAD-treated dentine increased the stresses within the root structure regardless of the effect of the post system used (11-15.4 MPa for PFP, 9.5-13.02 MPa for RBP and 14.2 MPa for ZP). Amongst the irrigation solutions used, EDTA and MTAD increased the stresses more than NaOCl in all models. All the irrigation solutions showed the same stress levels and distributions in the ZP model. NaOCl-, EDTA- and MTAD- treated dentine and a rigid post with high elastic modulus may increase fracture risk in roots with flared canals by increasing the stresses within root dentine. Therefore, solutions that alter the elastic modulus of dentine less (such as NaOCl) or an individually shaped post-core system constructed with a material that has an elastic modulus close to dentine (polyethylene fibre) should be used in weak roots. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Post Flight Analysis Of SHEFEX I: Shock Tunnel Testing And Related CFD Analysis

NASA Astrophysics Data System (ADS)

Schramm, Jan Martinez; Barth, Tarik; Wagner, Alexander; Hannemann, Klaus

2011-05-01

The SHarp Edge Flight EXperiment (SHEFEX) program of the German Aerospace Center (DLR) is primarily focused on the investigation of the potential to utilise improved shapes for space vehicles by considering sharp edges and facetted surfaces. One goal is to set up a sky based test facility to gain knowledge of the physics of hypersonic flow, complemented by numerical analysis and ground based testing. Further, the series of SHEFEX flight experiments is an excellent test bed for new technological concepts and flight instrumentation, and it is a source of motivation for young scientist and engineers providing an excellent school for future space-program engineers and managers. After the successful first SHEFEX flight in October 2005, a second flight is scheduled for September 2011 and additional flights are planned for 2015 ff. With the SHEFEX-I flight and the subsequent numerical and experimental post flight analysis, DLR could for the first time close the loop between the three major disciplines of aerothermodynamic research namely CFD, ground based testing and flight.

JPL Test Effectiveness Analysis

NASA Technical Reports Server (NTRS)

Shreck, Stephanie; Sharratt, Stephen; Smith, Joseph F.; Strong, Edward

2008-01-01

1) The pilot study provided meaningful conclusions that are generally consistent with the earlier Test Effectiveness work done between 1992 and 1994: a) Analysis of pre-launch problem/failure reports is consistent with earlier work. b) Analysis of post-launch early mission anomaly reports indicates that there are more software issues in newer missions, and the no-test category for identification of post-launch failures is more significant than in the earlier analysis. 2) Future work includes understanding how differences in Missions effect these analyses: a) There are large variations in the number of problem reports and issues that are documented by the different Projects/Missions. b) Some missions do not have any reported environmental test anomalies, even though environmental tests were performed. 3) Each project/mission has different standards and conventions for filling out the PFR forms, the industry may wish to address this issue: a) Existing problem reporting forms are to document and track problems, failures, and issues (etc.) for the projects, to ensure high quality. b) Existing problem reporting forms are not intended for data mining.

Assessing PTSD in the military: Validation of a scale distributed to Danish soldiers after deployment since 1998.

PubMed

Karstoft, Karen-Inge; Andersen, Søren B; Nielsen, Anni B S

2017-06-01

Since 1998, soldiers deployed to war zones with the Danish Defense (≈31,000) have been invited to fill out a questionnaire on post-mission reactions. This provides a unique data source for studying the psychological toll of war. Here, we validate a measure of PTSD-symptoms from the questionnaire. Soldiers from two cohorts deployed to Afghanistan with the International Security Assistance Force (ISAF) in 2009 (ISAF7, N = 334) and 2013 (ISAF15, N = 278) filled out a standard questionnaire (Psychological Reactions following International Missions, PRIM) concerning a range of post-deployment reactions including symptoms of PTSD (PRIM-PTSD). They also filled out a validated measure of PTSD-symptoms in DSM-IV, the PTSD-checklist (PCL). We tested reliability of PRIM-PTSD by estimating Cronbach's alpha, and tested validity by correlating items, clusters, and overall scale with corresponding items in the PCL. Furthermore, we conducted two confirmatory factor analytic models to test the factor structure of PRIM-PTSD, and tested measurement invariance of the selected model. Finally, we established a screening and a clinical cutoff score by application of ROC analysis. We found high internal consistency of the PRIM-PTSD (Cronbach's alpha = 0.88; both cohorts), strong item-item (0.48-0.83), item-cluster (0.43-0.72), cluster-cluster (0.71-0.82) and full-scale (0.86-0.88) correlations between PRIM-PTSD and PCL. The factor analyses showed adequate fit of a one-factor model, which was also found to display strong measurement invariance across cohorts. ROC curve analysis established cutoff scores for screening (sensitivity = 1, specificity = 0.93) and clinical use (sensitivity = 0.71, specificity = 0.98). In conclusion, we find that PRIM-PTSD is a valid measure for assessing PTSD-symptoms in Danish soldiers following deployment. © 2017 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Workplace bullying and post-traumatic stress symptoms among family physicians in Lithuania: an occupation and region specific approach.

PubMed

Malinauskiene, Vilija; Einarsen, Staale

2014-12-01

The study investigated associations between workplace bullying and post-traumatic stress symptoms as compared to and controlled for associations between the latter and other psychosocial stress factors at work and in everyday life. The study employed a representative sample of Lithuanian family physicians, hence investigated a particularly resourceful occupational group in a geographical region earlier found to have a high risk context for exposure to bullying at work. With a response rate of 89.2%, a total of 323 family physicians filled in an anonymous questionnaire on workplace bullying, post-traumatic symptomatology (IES-R), other psychosocial stressors at work and in everyday life, personal health resources (sense of coherence), behavioral characteristics and demographic variables. The statistical software SPSS 14.0, Windows was used in the analysis. Associations were tested using a multivariate logistic regression analysis. A high prevalence of bullying was found among family physicians in Lithuania, with 13% of them experiencing severe workplace bullying and 17.3% experiencing more occasional incidents of bullying. The prevalence of post-traumatic stress symptoms was also high with 15.8% scoring above the standardized cut-off thresholds for post-traumatic stress disorder. The odds ratio (OR) of severe bullying for post-traumatic stress after adjustment for age and gender was 8.05 (95% confidence intervals (CI): 3.80-17.04). In the fully adjusted model it increased to 13.88 (95% CI: 4.68-41.13) indicating cumulative effects of all the investigated stressors. Workplace bullying is particularly prevalent among Lithuanian family physicians, as are the symptoms of post-traumatic distress. Strong associations between post-traumatic stress and exposure to severe bullying indicate that bullying is a significant source of mental health.

Probabilistic structural analysis of space propulsion system LOX post

NASA Technical Reports Server (NTRS)

Newell, J. F.; Rajagopal, K. R.; Ho, H. W.; Cunniff, J. M.

1990-01-01

The probabilistic structural analysis program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress; Cruse et al., 1988) is applied to characterize the dynamic loading and response of the Space Shuttle main engine (SSME) LOX post. The design and operation of the SSME are reviewed; the LOX post structure is described; and particular attention is given to the generation of composite load spectra, the finite-element model of the LOX post, and the steps in the NESSUS structural analysis. The results are presented in extensive tables and graphs, and it is shown that NESSUS correctly predicts the structural effects of changes in the temperature loading. The probabilistic approach also facilitates (1) damage assessments for a given failure model (based on gas temperature, heat-shield gap, and material properties) and (2) correlation of the gas temperature with operational parameters such as engine thrust.

Effect of surface treatment and type of cement on push-out bond strength of zirconium oxide posts.

PubMed

Almufleh, Balqees S; Aleisa, Khalil I; Morgano, Steven M

2014-10-01

The effect of the surface treatment of zirconium oxide posts on their push-out bond strength is controversial. The purpose of this study was to compare the effects of 2 surface treatments on the bond strength of zirconium oxide posts cemented with different cements and to assess the failure mode. Seventy extracted human teeth were divided into 7 groups (n=10). Custom zirconium oxide posts (Cercon; Degudent) were fabricated for 6 groups. Posts in 3 groups were airborne-particle abraded (A). Posts in the other 3 groups were tribochemical silica coated (T). Three cements were used. Zinc phosphate cement was used to cement the zirconium oxide posts in groups AZ and TZ, RelyX ARC cement was used in groups ARA and TRA, and RelyX Unicem cement was used in groups ARU and TRU. Group C contained custom metal posts cemented with zinc phosphate cement. Specimens were horizontally sectioned into 3 sections and subjected to a push-out test. A mixed model analysis of variance, 1-way ANOVA, and the Tukey multiple comparison tests were used for statistical analysis. The highest push-out bond strength was recorded for Group ARU (21.03 MPa), and the lowest was recorded for Group ARA (7.57 MPa). No significant difference in push-out bond strength was found among the different surface treatments and root regions (P>.05). The type of cement had a significant effect on the push-out bond strength of zirconium oxide posts (P=.049). RelyX Unicem cement recorded (19.57 ±8.83 MPa) significantly higher push-out bond strength compared with zinc phosphate (9.95 ±6.31 MPa) and RelyX ARC cements (9.39 ±5.45 MPa). Adhesive failure at the post-cement interface was recorded for 75% of the posts cemented with zinc phosphate and RelyX ARC cements, while mixed failure was recorded for 75% of the posts cemented with RelyX Unicem cement. The type of cement used resulted in a statistically significant difference in the push-out bond strength of zirconium oxide posts, while both the surface treatment and root region resulted in no statistically significant effect after artificial aging. RelyX Unicem cement had significantly higher push-out bond strength than did zinc phosphate and RelyX ARC cements. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Versatile Software Package For Near Real-Time Analysis of Experimental Data

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Hoadley, Sherwood T.

1998-01-01

This paper provides an overview of a versatile software package developed for time- and frequency-domain analyses of experimental wind-tunnel data. This package, originally developed for analyzing data in the NASA Langley Transonic Dynamics Tunnel (TDT), is applicable for analyzing any time-domain data. A Matlab-based software package, TDT-analyzer, provides a compendium of commonly-required dynamic analysis functions in a user-friendly interactive and batch processing environment. TDT-analyzer has been used extensively to provide on-line near real-time and post-test examination and reduction of measured data acquired during wind tunnel tests of aeroelastically-scaled models of aircraft and rotorcraft as well as a flight test of the NASA High Alpha Research Vehicle (HARV) F-18. The package provides near real-time results in an informative and timely manner far exceeding prior methods of data reduction at the TDT.

Influence of specific muscle training on pain, activity limitation and kinesiophobia in women with back pain post-partum--a 'single-subject research design'.

PubMed

Gustafsson, Johanna; Nilsson-Wikmar, Lena

2008-03-01

Many women suffer from back pain and experience activity limitation post-partum. To our knowledge the physiological factors and physiotherapy related to back pain post-partum have received limited evaluation and the effectiveness of specific physiotherapeutic approaches to exercise should be tested. In addition, there has been limited research on kinesiophobia in women with back pain post-partum. The purpose of the current study was to test the influence of specific trunk muscle training on pain, activity limitation and kinesiophobia in 10 subjects with back pain post-partum. The treatment consisted of specific deep muscle training of the transversus abdominus and multifidus muscles. Pain was rated based on the visual analogue scale (VAS) and pain drawings. Activity limitation was recorded using the Disability Rating Index. Kinesiophobia was evaluated using the Swedish version of the Tampa Scale for Kinesiophobia. An A-B-A single-subject research design was used and a number of measurements were obtained during each phase. The analysis consisted of a visual inspection and a two standard deviation band test (2-SD). The visual analysis showed a trend towards reduced pain and activity limitation for all 10 subjects. The 2-SD test showed mixed results among all subjects. In addition, all subjects reported kinesiophobia before and after treatment. Individual specific deep muscle training of the transversus abdominus and multifidus muscles reduced pain and activity limitation in women with back pain post-partum. Further research is needed to determine more precisely how kinesiophobia affects women with back pain post-partum.

Pre-Test CFD for the Design and Execution of the Enhanced Injection and Mixing Project at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Drozda, Tomasz G.; Axdahl, Erik L.; Cabell, Karen F.

2014-01-01

With the increasing costs of physics experiments and simultaneous increase in availability and maturity of computational tools it is not surprising that computational fluid dynamics (CFD) is playing an increasingly important role, not only in post-test investigations, but also in the early stages of experimental planning. This paper describes a CFD-based effort executed in close collaboration between computational fluid dynamicists and experimentalists to develop a virtual experiment during the early planning stages of the Enhanced Injection and Mixing project at NASA Langley Research Center. This projects aims to investigate supersonic combustion ramjet (scramjet) fuel injection and mixing physics, improve the understanding of underlying physical processes, and develop enhancement strategies and functional relationships relevant to flight Mach numbers greater than 8. The purpose of the virtual experiment was to provide flow field data to aid in the design of the experimental apparatus and the in-stream rake probes, to verify the nonintrusive measurements based on NO-PLIF, and to perform pre-test analysis of quantities obtainable from the experiment and CFD. The approach also allowed for the joint team to develop common data processing and analysis tools, and to test research ideas. The virtual experiment consisted of a series of Reynolds-averaged simulations (RAS). These simulations included the facility nozzle, the experimental apparatus with a baseline strut injector, and the test cabin. Pure helium and helium-air mixtures were used to determine the efficacy of different inert gases to model hydrogen injection. The results of the simulations were analyzed by computing mixing efficiency, total pressure recovery, and stream thrust potential. As the experimental effort progresses, the simulation results will be compared with the experimental data to calibrate the modeling constants present in the CFD and validate simulation fidelity. CFD will also be used to investigate different injector concepts, improve understanding of the flow structure and flow physics, and develop functional relationships. Both RAS and large eddy simulations (LES) are planned for post-test analysis of the experimental data.

Effects of direct instruction of visual literacy skills on science achievement when integrated into inquiry learning

NASA Astrophysics Data System (ADS)

Galyas, Lesley Crowell

Understanding of visual representations is a pivotal skill necessary in science. These visual, verbal, and numeric representations are the crux of science discourses "by scientists, with students and the general public" (Pauwels, 2006, p.viii). Those who lack the understanding of these representations see it as a foreign language, one that they have never been taught to interpret. Roth, Bowen and Masciotra (2002) assert that students lack the necessary preparation to interpret scientific representational practices thoughtfully and skillfully and are not equipped to decipher the combinations of "divergent representational systems (graphs, images, equations) in a meaningful and edifying whole" (Pauwels, 2006, p.x). Several studies confirm that when students are unable to retrieve and apply knowledge, they will have difficulties with problem solving, critical thinking, and learning new material; moreover this has been demonstrated among all ability levels (O'Reilly & McNamara, 2007). The purpose of this mixed method case study was to explore the use of deliberate instruction of visual literacy skills embedded within inquiry science learning, utilizing the TLC method, for middle school students in a single classroom. Pre- and post-testing, teacher interviews and classroom observations were utilized. The study had three phases pre-implementation, implementation of TLC, and post implementation. The analysis was based on the Embedded Experimental Model. "This model is defined by having qualitative data embedded within an experimental design" (Creswell, 2007, Loc 806 of 3545). The 7th grade science classes studied are dual language immersion with 93% Hispanic and 100% economically disadvantaged students. These classes were taught by a single teacher where native Spanish speakers were taught in Spanish and English speakers were taught in English. The data for final test scores for students taught in English (English speakers, and EL exited) resulted in t (21)=5.42, * p≤.05; and for students taught in Spanish (EL) resulted in t (43)=10.29, *p≤.05. For these findings the following conclusions were made: Evidence from the t-test analysis suggests that increasing the focus of visual literacy skills increases student achievement on pre- and post-tests with both native English speakers as well as English learners.

[Effects of control-releasing arsenic trioxide-eluting stent on intimal smooth muscle cells and type III collagen in canine coronary artery post-stent model].

PubMed

Zhao, Jun-Li; Sun, Bao-Gui; Wen, Qin-Zhu

2010-06-01

To study the safety and efficacy of control-releasing arsenic trioxide (As2O3)-eluting stent on intimal smooth muscle cells (SMC) and type III collagen (CIII) in canine coronary artery post-stent model. Twenty-four experimental canines were equally divided into 4 groups, the three tested groups were deployed by stents with different dosage of As2O3 (1.6 microg/mm2, 2.4 microg/mm2 and 3.2 microg/mm2 in low, median and high dose groups, respectively) and coated with polybutyl methacrylate/nano silica and poly-lactide-coglycolide in mild oversizing (stent/vessel ratio of 1.3:1) in left anterior descending (LAD) or circumflex coronary arteries (LCX), while the control group only by simple coated stent without As2O3. The effect was assessed 4 weeks after stent implantation in terms of vascular histomorphology, and changes of SMC and C III expressions were detected using immunohistochemical analysis. Subintimal hemorrhage, medial/adventitial necrosis, thrombosis and inflammatory cell infiltration were not found and integral endothelium could be seen under screening electron microscopy in all groups. Positive expression of SMC and CIII in the tested groups, especial in the high dose As2O3 group, was more weaker than that in control group. Histo-morphological analysis showed that the neo-genetic intimal area and vascular stenosis were lower, but the mean luminal diameter was larger in the three tested groups than that in the control group (P < 0.01). Comparisons of various indices between tested groups treated by different doses of As2O3 showed that the difference between high/median dose vs. low dose was significant (P < 0.01), but that between high dose vs. median dose was insignificant (P > 0.05). Control-releasing As2O3-eluting stent shows a reliable and safe effect in preventing and treating post-stent restenosis by its dose-dependent inhibition on expressions of SMC and CIII to suppress the neo-genesis of intimal hyperplasia.

Benefiting from Listening in Vocabulary Development

ERIC Educational Resources Information Center

Bulut, Berker; Karasakaloglu, Nuri

2017-01-01

In this research, the effect of active listening training given to fourth grade students on their vocabulary was examined. Pre-test--post-test control group trial model, which is one of the semi-experimental trial models, was used. Besides, "Vocabulary Test" developed by the researcher was applied to experimental and control groups…

Rasch model based analysis of the Force Concept Inventory

NASA Astrophysics Data System (ADS)

Planinic, Maja; Ivanjek, Lana; Susac, Ana

2010-06-01

The Force Concept Inventory (FCI) is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear measures for persons and items from raw test scores and which can provide important insight in the structure and functioning of the test (how item difficulties are distributed within the test, how well the items fit the model, and how well the items work together to define the underlying construct). The data for the Rasch analysis come from the large-scale research conducted in 2006-07, which investigated Croatian high school students’ conceptual understanding of mechanics on a representative sample of 1676 students (age 17-18 years). The instrument used in research was the FCI. The average FCI score for the whole sample was found to be (27.7±0.4)% , indicating that most of the students were still non-Newtonians at the end of high school, despite the fact that physics is a compulsory subject in Croatian schools. The large set of obtained data was analyzed with the Rasch measurement computer software WINSTEPS 3.66. Since the FCI is routinely used as pretest and post-test on two very different types of population (non-Newtonian and predominantly Newtonian), an additional predominantly Newtonian sample ( N=141 , average FCI score of 64.5%) of first year students enrolled in introductory physics course at University of Zagreb was also analyzed. The Rasch model based analysis suggests that the FCI has succeeded in defining a sufficiently unidimensional construct for each population. The analysis of fit of data to the model found no grossly misfitting items which would degrade measurement. Some items with larger misfit and items with significantly different difficulties in the two samples of students do require further examination. The analysis revealed some problems with item distribution in the FCI and suggested that the FCI may function differently in non-Newtonian and predominantly Newtonian population. Some possible improvements of the test are suggested.

Evaluation of the Edinburgh Post Natal Depression Scale using Rasch analysis

PubMed Central

Pallant, Julie F; Miller, Renée L; Tennant, Alan

2006-01-01

Background The Edinburgh Postnatal Depression Scale (EPDS) is a 10 item self-rating post-natal depression scale which has seen widespread use in epidemiological and clinical studies. Concern has been raised over the validity of the EPDS as a single summed scale, with suggestions that it measures two separate aspects, one of depressive feelings, the other of anxiety. Methods As part of a larger cross-sectional study conducted in Melbourne, Australia, a community sample (324 women, ranging in age from 18 to 44 years: mean = 32 yrs, SD = 4.6), was obtained by inviting primiparous women to participate voluntarily in this study. Data from the EPDS were fitted to the Rasch measurement model and tested for appropriate category ordering, for item bias through Differential Item Functioning (DIF) analysis, and for unidimensionality through tests of the assumption of local independence. Results Rasch analysis of the data from the ten item scale initially demonstrated a lack of fit to the model with a significant Item-Trait Interaction total chi-square (chi Square = 82.8, df = 40; p < .001). Removal of two items (items 7 and 8) resulted in a non-significant Item-Trait Interaction total chi-square with a residual mean value for items of -0.467 with a standard deviation of 0.850, showing fit to the model. No DIF existed in the final 8-item scale (EPDS-8) and all items showed fit to model expectations. Principal Components Analysis of the residuals supported the local independence assumption, and unidimensionality of the revised EPDS-8 scale. Revised cut points were identified for EPDS-8 to maintain the case identification of the original scale. Conclusion The results of this study suggest that EPDS, in its original 10 item form, is not a viable scale for the unidimensional measurement of depression. Rasch analysis suggests that a revised eight item version (EPDS-8) would provide a more psychometrically robust scale. The revised cut points of 7/8 and 9/10 for the EPDS-8 show high levels of agreement with the original case identification for the EPDS-10. PMID:16768803

Detecting Intervention Effects in a Cluster-Randomized Design Using Multilevel Structural Equation Modeling for Binary Responses.

PubMed

Cho, Sun-Joo; Preacher, Kristopher J; Bottge, Brian A

2015-11-01

Multilevel modeling (MLM) is frequently used to detect group differences, such as an intervention effect in a pre-test-post-test cluster-randomized design. Group differences on the post-test scores are detected by controlling for pre-test scores as a proxy variable for unobserved factors that predict future attributes. The pre-test and post-test scores that are most often used in MLM are summed item responses (or total scores). In prior research, there have been concerns regarding measurement error in the use of total scores in using MLM. To correct for measurement error in the covariate and outcome, a theoretical justification for the use of multilevel structural equation modeling (MSEM) has been established. However, MSEM for binary responses has not been widely applied to detect intervention effects (group differences) in intervention studies. In this article, the use of MSEM for intervention studies is demonstrated and the performance of MSEM is evaluated via a simulation study. Furthermore, the consequences of using MLM instead of MSEM are shown in detecting group differences. Results of the simulation study showed that MSEM performed adequately as the number of clusters, cluster size, and intraclass correlation increased and outperformed MLM for the detection of group differences.

Post-Stall Aerodynamic Modeling and Gain-Scheduled Control Design

NASA Technical Reports Server (NTRS)

Wu, Fen; Gopalarathnam, Ashok; Kim, Sungwan

2005-01-01

A multidisciplinary research e.ort that combines aerodynamic modeling and gain-scheduled control design for aircraft flight at post-stall conditions is described. The aerodynamic modeling uses a decambering approach for rapid prediction of post-stall aerodynamic characteristics of multiple-wing con.gurations using known section data. The approach is successful in bringing to light multiple solutions at post-stall angles of attack right during the iteration process. The predictions agree fairly well with experimental results from wind tunnel tests. The control research was focused on actuator saturation and .ight transition between low and high angles of attack regions for near- and post-stall aircraft using advanced LPV control techniques. The new control approaches maintain adequate control capability to handle high angle of attack aircraft control with stability and performance guarantee.

Effectiveness of guided inquiry learning model to improve students’ critical thinking skills at senior high school

NASA Astrophysics Data System (ADS)

Nisa, E. K.; Koestiari, T.; Habibbulloh, M.; Jatmiko, Budi

2018-03-01

This research aimed to describe the effectiveness of guided inquiry learning model to improve students' critical thinking skills. Subjects in the research were 90 students at three groups of senior high school grade X on Tarik (Indonesia), which follows a physics lesson on static fluid material in academic year 2016/2017. The research was used one group pre-test and post-test design. Before and after being given physics learning with guided discovery learning model, students in the three groups were given the same test (pre-test and post-test). The results of this research showed: 1) there is an increased score of students' critical thinking skills in each group on α = 5%; 2) average N-gain of students' critical thinking skills of each group is a high category; and 3) average N-gain of the three groups did not differ. The conclusion of this research is that learning model of guided inquiry effective to improve students' critical thinking skills.

Neutrophil CD64, C-reactive protein, and procalcitonin in the identification of sepsis in the ICU - Post-test probabilities.

PubMed

Jämsä, Joel; Ala-Kokko, Tero; Huotari, Virva; Ohtonen, Pasi; Savolainen, Eeva-Riitta; Syrjälä, Hannu

2018-02-01

We were interested in whether C-reactive protein (CRP) and procalcitonin (PCT) distinguish sepsis from non-septic controls and whether a combination of CRP, PCT, and neutrophil CD64 improves identification of sepsis in the intensive care unit (ICU). We analyzed the CRP and PCT concentrations from 27 patients with sepsis and 15 ICU controls. In addition, CD64 on neutrophils was measured using quantitative flow cytometry. We present a multiple marker analysis for sepsis diagnostics combining neutrophil CD64, CRP, and PCT using post-test analysis. The CRP and PCT values separated sepsis and non-septic ICU patients. In post-test analysis, CRP provided a positive probability of 0.48 and a negative probability of 0.053 for sepsis in the ICU; while, the corresponding values were 0.35 and 0.0059, respectively, for PCT and 0.62 and 0.0013, respectively, for neutrophil CD64. When neutrophil CD64 was analyzed with PCT and CRP, the probabilities were 0.98 and <0.001, respectively. Neutrophil CD64 expression was superior to PCT and CRP for the identification of sepsis in ICU. Positive post-test probability for any combinations of simultaneously analyzed CRP, PCT and CD64 showed improved diagnostic accuracy for sepsis. This approach may be useful for guiding antibiotic treatment in ICU. Copyright © 2017 Elsevier Inc. All rights reserved.

Shuttle environmental and thermal control/life support system computer program, supplement 1

NASA Technical Reports Server (NTRS)

Ayotte, W. J.

1975-01-01

The computer programs developed to simulate the RSECS (Representative Shuttle Environmental Control System) were described. These programs were prepared to provide pretest predictions, post-test analysis and real time problem analysis for RSECS test planning and evaluation.

Speech perception scores in cochlear implant recipients: An analysis of ceiling effects in the CUNY sentence test (Quiet) in post-lingually deafened cochlear implant recipients.

PubMed

Ebrahimi-Madiseh, Azadeh; Eikelboom, Robert H; Jayakody, Dona Mp; Atlas, Marcus D

2016-01-01

To evaluate the clinical utility of the City University of New York sentence test in a cohort of post-lingually deafened cochlear implants recipients over time. 117 post-lingually deafened, Australian English-speaking CI recipients aged between 23 and 98 years (M = 66 years; SD = 15.09) were recruited. CUNY sentence test scores in quiet were collated and analysed at two cut-offs, 95% and 100%, as ceiling scores. CUNY sentence scores ranged from 4% to 100% (M = 86.75; SD = 20.65), with 38.8% of participants scoring 95% and 16.5% of participants reaching the 100% scores. The percentage of participants reaching the 95% and 100% ceiling scores increased over time (6 and 12 months post-implantation). The distribution of all post-operative CUNY test scores skewed to the right with 82% of test scores reaching above 90%. This study demonstrates that the CUNY test cannot be used as a valid tool to measure the speech perception skills of post-lingually deafened CI recipients over time. This may be overcome by using adaptive test protocols or linguistically, cognitively or contextually demanding test materials. The high percentage of CI recipients achieving ceiling scores for the CUNY sentence test in quiet at 3 months post-implantation, questions the validity of using CUNY in CI assessment test battery and limits its application for use in longitudinal studies evaluating CI outcomes. Further studies are required to examine different methods to overcome this problem.

Chikungunya Arthritis Mechanisms in the Americas (CAMA): A cross sectional analysis of chikungunya arthritis patients 22 months post-infection demonstrates a lack of viral persistence in synovial fluid

DTIC Science & Technology

2017-06-30

Chikungunya Arthritis Mechanisms in the Americas (CAMA): 1 A cross-sectional analysis of chikungunya arthritis patients 22-months post -infection...school or less level of education (94%). CHIKV arthritis 58 patients (Median 22-months (IQR 21-23) post -CHIKV infection) had moderate disease...rheumatoid arthritis are being tested in this patient population. However, such therapeutics could be 76 dangerous if active virus is still present

Evaluation of analgesic and anti-inflammatory activity of a combination of tramadol-ibuprofen in experimental animals.

PubMed

Suthakaran, Chidambarann; Kayalvizhi, Muniyagounder K; Nithya, Karnam; Raja, Thozhudalangudy Ar

2017-01-01

Pain is the major concern of patients attending dental clinics, and satisfactory pain relief has always been difficult to achieve. Since the pathophysiology of pain is a complex, central and peripheral nervous system process, combined analgesic regimens with different mechanisms of action as a multimodal approach are becoming popular among the clinicians and dentists. The aim of the present study was to evaluate the analgesic and anti-inflammatory activity of ibuprofen and tramadol when used alone or in combination in animal models of pain and inflammation. The animals were divided into six groups with six animals in each group. Analgesic activity was assessed by hot plate method in rats and by acetic acid-induced writhing test in mice. Paw edema model in rats after induction with 0.1 mL of 1% carrageenan was used to assess the anti-inflammatory activity. Analysis of variance followed by Tukey's honestly significant difference post hoc test was used for statistical analysis. Combined use of tramadol and ibuprofen provided enhanced analgesic and anti-inflammatory effects in animal models of pain and inflammation.

In Vitro, In Vivo and Post Explantation Testing of Glucose-Detecting Biosensors: Current Methods and Recommendations

PubMed Central

Koschwanez, Heidi E.; Reichert, W. Monty

2007-01-01

To date, there have been a number of cases where glucose sensors have performed well over long periods of implantation; however, it remains difficult to predict whether a given sensor will perform reliably, will exhibit gradual degradation of performance, or will fail outright soon after implantation. Typically, the literature emphasizes the sensor that performed well, while only briefly (if at all) mentioning the failed devices. This leaves open the question of whether current sensor designs are adequate for the hostile in vivo environment, and whether these sensors have been assessed by the proper regimen of testing protocols. This paper reviews the current in vitro and in vivo testing procedures used to evaluate the functionality and biocompatibility of implantable glucose sensors. An overview of the standards and regulatory bodies that govern biomaterials and end-product device testing precedes a discussion of up-to-date invasive and non-invasive technologies for diabetes management. Analysis of current in vitro, in vivo, and then post implantation testing is presented. Given the underlying assumption that the success of the sensor in vivo foreshadows the long-term reliability of the sensor in the human body, the relative merits of these testing methods are evaluated with respect to how representative they are of human models. PMID:17524479

Modeling Adhesive Anchors in a Discrete Element Framework

PubMed Central

Marcon, Marco; Vorel, Jan; Ninčević, Krešimir; Wan-Wendner, Roman

2017-01-01

In recent years, post-installed anchors are widely used to connect structural members and to fix appliances to load-bearing elements. A bonded anchor typically denotes a threaded bar placed into a borehole filled with adhesive mortar. The high complexity of the problem, owing to the multiple materials and failure mechanisms involved, requires a numerical support for the experimental investigation. A reliable model able to reproduce a system’s short-term behavior is needed before the development of a more complex framework for the subsequent investigation of the lifetime of fasteners subjected to various deterioration processes can commence. The focus of this contribution is the development and validation of such a model for bonded anchors under pure tension load. Compression, modulus, fracture and splitting tests are performed on standard concrete specimens. These serve for the calibration and validation of the concrete constitutive model. The behavior of the adhesive mortar layer is modeled with a stress-slip law, calibrated on a set of confined pull-out tests. The model validation is performed on tests with different configurations comparing load-displacement curves, crack patterns and concrete cone shapes. A model sensitivity analysis and the evaluation of the bond stress and slippage along the anchor complete the study. PMID:28786964

The Communities Advancing Resilience Toolkit (CART): development of a survey instrument to assess community resilience.

PubMed

Pfefferbaum, Rose L; Neas, Barbara R; Pfefferbaum, Betty; Norris, Fran H; Van Horn, Richard L

2013-01-01

While building community resilience to disasters is becoming an important strategy in emergency management, this is a new field of research with few available instruments for assessing community resilience. This article describes the development of the Communities Advancing Resilience Toolkit (CART) survey instrument. CART is a community intervention designed to enhance community resilience to disasters, in part, by engaging communities in measuring it. The survey instrument, originally based on community capacity and related literature and on key informant input, was refined through a series of four field tests. Community organizations worked with researchers in a participatory action process that provided access to samples and helped to guide the research. Exploratory factor analysis performed after each field test led to the identification of four interrelated constructs (also called domains) which represent the foundation for CART Connection and Caring, Resources, Transformative Potential, and Disaster Management. This model was confirmed using confirmatory factor analysis on two community samples. The CART survey can provide data for organizations and communities interested in assessing a community's resilience to disasters. Baseline data, preferably collected pre disaster can be compared to data collected post disaster and/or post intervention.

76 FR 53137 - Bundled Payments for Care Improvement Initiative: Request for Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-25

... (RFA) will test episode-based payment for acute care and associated post-acute care, using both retrospective and prospective bundled payment methods. The RFA requests applications to test models centered around acute care; these models will inform the design of future models, including care improvement for...

Non-linear modelling and control of semi-active suspensions with variable damping

NASA Astrophysics Data System (ADS)

Chen, Huang; Long, Chen; Yuan, Chao-Chun; Jiang, Hao-Bin

2013-10-01

Electro-hydraulic dampers can provide variable damping force that is modulated by varying the command current; furthermore, they offer advantages such as lower power, rapid response, lower cost, and simple hardware. However, accurate characterisation of non-linear f-v properties in pre-yield and force saturation in post-yield is still required. Meanwhile, traditional linear or quarter vehicle models contain various non-linearities. The development of a multi-body dynamics model is very complex, and therefore, SIMPACK was used with suitable improvements for model development and numerical simulations. A semi-active suspension was built based on a belief-desire-intention (BDI)-agent model framework. Vehicle handling dynamics were analysed, and a co-simulation analysis was conducted in SIMPACK and MATLAB to evaluate the BDI-agent controller. The design effectively improved ride comfort, handling stability, and driving safety. A rapid control prototype was built based on dSPACE to conduct a real vehicle test. The test and simulation results were consistent, which verified the simulation.

The Holocaust as Reflected in Communist and Post-Communist Romanian Textbooks

ERIC Educational Resources Information Center

Barbulescu, Ana; Degeratu, Laura; Gusu, Cosmina

2013-01-01

Romanian history textbooks were mostly silent about the Holocaust during the Communist era. The authors reconstructed the different models of remembering the Holocaust that are present in post-Communist Romanian textbooks. The analysis revealed the existence of six different models of recollecting this history. The six models of representing the…

Chemoresponsiveness and breath physiology in anosmia.

PubMed

Mazzatenta, Andrea; Pokorski, Mieczyslaw; Montinaro, Danilo; Di Giulio, Camillo

2015-01-01

Anosmia is a model to study the interaction among chemoreception systems. In the head injury, the traumatic irreversible anosmia caused by damage to olfactory nerve fibers and brain regions is of enviable research interest. In this study, psychophysiological tests for a comprehensive assessment of olfactory function were utilized to investigate anosmia, together with a new technique based on the breath real-time monitoring of volatile organic compounds (VOCs). We applied the breath and VOCs analysis to investigate chemoresponsiveness in the long-term irreversible post-traumatic anosmia.

Analysis methods for Kevlar shield response to rotor fragments

NASA Technical Reports Server (NTRS)

Gerstle, J. H.

1977-01-01

Several empirical and analytical approaches to rotor burst shield sizing are compared and principal differences in metal and fabric dynamic behavior are discussed. The application of transient structural response computer programs to predict Kevlar containment limits is described. For preliminary shield sizing, present analytical methods are useful if insufficient test data for empirical modeling are available. To provide other information useful for engineering design, analytical methods require further developments in material characterization, failure criteria, loads definition, and post-impact fragment trajectory prediction.

Pre and post PET-CT impact on oesophageal cancer management: a retrospective analysis.

NASA Astrophysics Data System (ADS)

Azmi, NA; Razak, HRA; Vinjamuri, S.

2017-05-01

Assessment of the retrospective cancer incidence, prevalence and crude survival rates of oesophageal cancer to allow comparison between pre and post PET-CT introduction are part of 4 phase cost effectiveness research. It will provide baseline data for to assess PET or PET-CT cost effective potential for staging. A total of 849 patient’s data received from NWCIS databases with various stages of oesophageal cancer between 2001 and 2008. The fundamental activities are retrospective analysis of patient data. In most cases where appropriate, results are presented with 95 percent confidence intervals (CI). Variances between patient groups and variables are assessed using chi-square test. In cases where it deems vital, multiple logistic regression are used to modify for potential confounder such as age and sex. All p-values are two-sided and any value lower than 0.05 were considered to suggest a statistically significant result. Retrospective analysis were categorised into two categories, patients from 2001-2003 considered as pre PET and post PET for 2004-2008. This categorisation allows better comparison of patients’ survival trend to be made between both groups. Rates are presented in percentages and being grouped by tumour characteristics and other variables associated with demographic profile, diagnosis, staging and treatment. Results allowed comparison of oesophageal cancer trends between the pre and post PET-CT introduction such as changes in incidence rate or changes in survival. These data were used to normalise the decision tree model so that cost-effectiveness analysis can be performed across the whole population.

Comparison of fracture resistance between cast, CAD/CAM milling, and direct metal laser sintering metal post systems.

PubMed

Bilgin, Mehmet Selim; Erdem, Ali; Dilber, Erhan; Ersoy, İbrahim

2016-01-01

The purpose of this study was to compare the fracture resistance of Co-Cr post-cores fabricated with 3 different techniques: traditional casting (TC), computer-aided design and manufacturing (CAD/CAM) milling (CCM) and direct metal laser sintering (DMLS). Forty intact human mandibular premolar were endodontically treated. The roots were then randomly divided into four groups according to the post systems: the control group was only filled with gutta percha. Co-Cr metal posts were fabricated with TC, CCM and DMLS in the other three groups. The posts were luted with a resin cement and subjected to compression test at a crosshead speed of 1mm/min. The statistical analysis of the data was performed using one-way analysis of variance (ANOVA) and multiple comparison post hoc Tukey tests (α=.05). The samples were examined under a stereomicroscope with ×20 magnification for the evaluation of the fracture types. The mean fracture loads were 432.69 N for control, 608.89 N for TC, 689.40 N for DMLS and 959.26 N for CCM. One-way ANOVA revealed significant difference between the groups (p<0.01). In the post hoc Tukey test, there were significant differences between groups except DMLS and TC. While Co-Cr posts fabricated by TC and DMLS systems performed similarly in terms of fracture resistance, posts fabricated by CCM techniques showed higher fracture resistance values. Co-Cr metal posts fabricated by CCM and DMLS could be an alternative to TC processing in daily clinical application. Copyright © 2015 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

A Chronic Longitudinal Characterization of Neurobehavioral and Neuropathological Cognitive Impairment in a Mouse Model of Gulf War Agent Exposure

PubMed Central

Zakirova, Zuchra; Crynen, Gogce; Hassan, Samira; Abdullah, Laila; Horne, Lauren; Mathura, Venkatarajan; Crawford, Fiona; Ait-Ghezala, Ghania

2016-01-01

Gulf War Illness (GWI) is a chronic multisymptom illness with a central nervous system component that includes memory impairment as well as neurological and musculoskeletal deficits. Previous studies have shown that in the First Persian Gulf War conflict (1990–1991) exposure to Gulf War (GW) agents, such as pyridostigmine bromide (PB) and permethrin (PER), were key contributors to the etiology of GWI. For this study, we used our previously established mouse model of GW agent exposure (10 days PB+PER) and undertook an extensive lifelong neurobehavioral characterization of the mice from 11 days to 22.5 months post exposure in order to address the persistence and chronicity of effects suffered by the current GWI patient population, 24 years post-exposure. Mice were evaluated using a battery of neurobehavioral testing paradigms, including Open Field Test (OFT), Elevated Plus Maze (EPM), Three Chamber Testing, Radial Arm Water Maze (RAWM), and Barnes Maze (BM) Test. We also carried out neuropathological analyses at 22.5 months post exposure to GW agents after the final behavioral testing. Our results demonstrate that PB+PER exposed mice exhibit neurobehavioral deficits beginning at the 13 months post exposure time point and continuing trends through the 22.5 month post exposure time point. Furthermore, neuropathological changes, including an increase in GFAP staining in the cerebral cortices of exposed mice, were noted 22.5 months post exposure. Thus, the persistent neuroinflammation evident in our model presents a platform with which to identify novel biological pathways, correlating with emergent outcomes that may be amenable to therapeutic targeting. Furthermore, in this work we confirmed our previous findings that GW agent exposure causes neuropathological changes, and have presented novel data which demonstrate increased disinhibition, and lack of social preference in PB+PER exposed mice at 13 months after exposure. We also extended upon our previous work to cover the lifespan of the laboratory mouse using a battery of neurobehavioral techniques. PMID:26793076

Exposure to workplace bullying and post-traumatic stress disorder symptomology: the role of protective psychological resources.

PubMed

Spence Laschinger, Heather K; Nosko, Amanda

2015-03-01

To examine the relationship between nurses' exposure to workplace bullying and Post-Traumatic Stress Disorder symptomology and the protective role of psychological capital (PsyCap). Workplace bullying has serious organisational and health effects in nursing. Few studies have examined the relation of workplace bullying to serious mental health outcomes, such as Post-Traumatic Stress Disorder. Even fewer have examined the effect of intrapersonal strengths on the health impact of workplace bullying. A survey of 1205 hospital nurses was conducted to test the hypothesized model. Nurses completed standardized measures of bullying, Post-Traumatic Stress Disorder and PsyCap. A moderated regression analysis revealed that more frequent exposure to workplace bullying was significantly related to Post-Traumatic Stress Disorder symptomology regardless of the PsyCap level. That is, PsyCap did not moderate the bullying/PTSD relationship in either group. Bullying exposure and PsyCap were significant independent predictors of Post-Traumatic Stress Disorder symptoms in both groups. Efficacy, a subdimension of PsyCap, moderated the bullying/Post-Traumatic Stress Disorder relationship only among experienced nurses. Workplace bullying appears to be predictive of Post-Traumatic Stress Disorder symptomology, a serious mental health outcome. Workplace bullying is a serious threat to nurses' health and calls for programmes that eliminate bullying and encourage greater levels of positive resources among nurses. © 2013 John Wiley & Sons Ltd.

Update of the NEXT Ion Thruster Service Life Assessment with Post-Test Correlation to the Long Duration Test

NASA Technical Reports Server (NTRS)

Yim, John T.; Soulas, George C.; Shastry, Rohit; Choi, Maria; Mackey, Jonathan A.; Sarver-Verhey, Timothy R.

2017-01-01

The service life assessment for NASA's Evolutionary Xenon Thruster is updated to incorporate the results from the successful and voluntarily early completion of the 51,184 hour long duration test which demonstrated 918 kg of total xenon throughput. The results of the numerous post-test investigations including destructive interrogations have been assessed against all of the critical known and suspected failure mechanisms to update the life and throughput expectations for each major component. Analysis results of two of the most acute failure mechanisms, namely pit-and-groove erosion and aperture enlargement of the accelerator grid, are not updated in this work but will be published at a future time after analysis completion.

A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

PubMed

Elliott, Alan C; Hynan, Linda S

2011-04-01

The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Global patterns in post-dispersal seed removal by invertebrates and vertebrates.

PubMed

Peco, Begoña; Laffan, Shawn W; Moles, Angela T

2014-01-01

It is commonly accepted that species interactions such as granivory are more intense in the tropics. However, this has rarely been tested. A global dataset of post-dispersal seed removal by invertebrates and vertebrates for 79 native plant species from semi-natural and natural terrestrial habitats ranging from 55° N to 45° S, was compiled from the global literature to test the hypothesis that post-dispersal seed removal by invertebrates and vertebrates is more intense at lower latitudes. We also quantified the relationship between post-dispersal seed removal by vertebrates and by invertebrates to global climatic features including temperature, actual evapotranspiration (AET) and rainfall seasonality. Linear mixed effect models were applied to describe the relationships between seed removal and latitude, hemisphere and climatic variables controlling for the effect of seed mass. Post-dispersal seed removal by invertebrates was negatively related to latitude. In contrast, post-dispersal seed removal by vertebrates was positively but weakly related to latitude. Mean annual temperature and actual evapotranspiration were positively related to post-dispersal seed removal by invertebrates, but not to post-dispersal seed removal by vertebrates, which was only marginally negatively related to rainfall seasonality. The inclusion of seed mass improved the fit of all models, but the term for seed mass was not significant in any model. Although a good climatic model for predicting post-dispersal seed predation by vertebrates at the global level was not found, our results suggest different and opposite latitudinal patterns of post-dispersal seed removal by invertebrates vs vertebrates. This is the first time that a negative relationship between post-dispersal seed removal by invertebrates and latitude, and a positive relationship with temperature and AET have been documented at a global-scale. These results have important implications for understanding global patterns in plant-animal interactions, and the factors that shape plant reproductive ecology, and also for predicting how this plant-animal interaction might respond to climate change.

Global Patterns in Post-Dispersal Seed Removal by Invertebrates and Vertebrates

PubMed Central

Peco, Begoña; Laffan, Shawn W.; Moles, Angela T.

2014-01-01

It is commonly accepted that species interactions such as granivory are more intense in the tropics. However, this has rarely been tested. A global dataset of post-dispersal seed removal by invertebrates and vertebrates for 79 native plant species from semi-natural and natural terrestrial habitats ranging from 55° N to 45° S, was compiled from the global literature to test the hypothesis that post-dispersal seed removal by invertebrates and vertebrates is more intense at lower latitudes. We also quantified the relationship between post-dispersal seed removal by vertebrates and by invertebrates to global climatic features including temperature, actual evapotranspiration (AET) and rainfall seasonality. Linear mixed effect models were applied to describe the relationships between seed removal and latitude, hemisphere and climatic variables controlling for the effect of seed mass. Post-dispersal seed removal by invertebrates was negatively related to latitude. In contrast, post-dispersal seed removal by vertebrates was positively but weakly related to latitude. Mean annual temperature and actual evapotranspiration were positively related to post-dispersal seed removal by invertebrates, but not to post-dispersal seed removal by vertebrates, which was only marginally negatively related to rainfall seasonality. The inclusion of seed mass improved the fit of all models, but the term for seed mass was not significant in any model. Although a good climatic model for predicting post-dispersal seed predation by vertebrates at the global level was not found, our results suggest different and opposite latitudinal patterns of post-dispersal seed removal by invertebrates vs vertebrates. This is the first time that a negative relationship between post-dispersal seed removal by invertebrates and latitude, and a positive relationship with temperature and AET have been documented at a global-scale. These results have important implications for understanding global patterns in plant-animal interactions, and the factors that shape plant reproductive ecology, and also for predicting how this plant-animal interaction might respond to climate change. PMID:24618879

Novel test of motor and other dysfunctions in mouse neurological disease models.

PubMed

Barth, Albert M I; Mody, Istvan

2014-01-15

Just like human neurological disorders, corresponding mouse models present multiple deficiencies. Estimating disease progression or potential treatment effectiveness in such models necessitates the use of time consuming and multiple tests usually requiring a large number of scarcely available genetically modified animals. Here we present a novel and simple single camera arrangement and analysis software for detailed motor function evaluation in mice walking on a wire mesh that provides complex 3D information (instantaneous position, speed, distance traveled, foot fault depth, duration, location, relationship to speed of movement, etc.). We investigated 3 groups of mice with various neurological deficits: (1) unilateral motor cortical stroke; (2) effects of moderate ethanol doses; and (3) aging (96-99 weeks old). We show that post stroke recovery can be divided into separate stages based on strikingly different characteristics of motor function deficits, some resembling the human motor neglect syndrome. Mice treated with moderate dose of alcohol and aged mice showed specific motor and exploratory deficits. Other tests rely either partially or entirely on manual video analysis introducing a significant subjective component into the analysis, and analyze a single aspect of motor function. Our novel experimental approach provides qualitatively new, complex information about motor impairments and locomotor/exploratory activity. It should be useful for the detailed characterization of a broad range of human neurological disease models in mice, and for the more accurate assessment of disease progression or treatment effectiveness. Copyright © 2013 Elsevier B.V. All rights reserved.

Identifying students with dyslexia in higher education.

PubMed

Tops, Wim; Callens, Maaike; Lammertyn, Jan; Van Hees, Valérie; Brysbaert, Marc

2012-10-01

An increasing number of students with dyslexia enter higher education. As a result, there is a growing need for standardized diagnosis. Previous research has suggested that a small number of tests may suffice to reliably assess students with dyslexia, but these studies were based on post hoc discriminant analysis, which tends to overestimate the percentage of systematic variance, and were limited to the English language (and the Anglo-Saxon education system). Therefore, we repeated the research in a non-English language (Dutch) and we selected variables on the basis of a prediction analysis. The results of our study confirm that it is not necessary to administer a wide range of tests to diagnose dyslexia in (young) adults. Three tests sufficed: word reading, word spelling and phonological awareness, in line with the proposal that higher education students with dyslexia continue to have specific problems with reading and writing. We also show that a traditional postdiction analysis selects more variables of importance than the prediction analysis. However, these extra variables explain study-specific variance and do not result in more predictive power of the model.

POST2 End-To-End Descent and Landing Simulation for the Autonomous Landing and Hazard Avoidance Technology Project

NASA Technical Reports Server (NTRS)

Fisher, Jody l.; Striepe, Scott A.

2007-01-01

The Program to Optimize Simulated Trajectories II (POST2) is used as a basis for an end-to-end descent and landing trajectory simulation that is essential in determining the design and performance capability of lunar descent and landing system models and lunar environment models for the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project. This POST2-based ALHAT simulation provides descent and landing simulation capability by integrating lunar environment and lander system models (including terrain, sensor, guidance, navigation, and control models), along with the data necessary to design and operate a landing system for robotic, human, and cargo lunar-landing success. This paper presents the current and planned development and model validation of the POST2-based end-to-end trajectory simulation used for the testing, performance and evaluation of ALHAT project system and models.

Non-linear learning in online tutorial to enhance students’ knowledge on normal distribution application topic

NASA Astrophysics Data System (ADS)

Kartono; Suryadi, D.; Herman, T.

2018-01-01

This study aimed to analyze the enhancement of non-linear learning (NLL) in the online tutorial (OT) content to students’ knowledge of normal distribution application (KONDA). KONDA is a competence expected to be achieved after students studied the topic of normal distribution application in the course named Education Statistics. The analysis was performed by quasi-experiment study design. The subject of the study was divided into an experimental class that was given OT content in NLL model and a control class which was given OT content in conventional learning (CL) model. Data used in this study were the results of online objective tests to measure students’ statistical prior knowledge (SPK) and students’ pre- and post-test of KONDA. The statistical analysis test of a gain score of KONDA of students who had low and moderate SPK’s scores showed students’ KONDA who learn OT content with NLL model was better than students’ KONDA who learn OT content with CL model. Meanwhile, for students who had high SPK’s scores, the gain score of students who learn OT content with NLL model had relatively similar with the gain score of students who learn OT content with CL model. Based on those findings it could be concluded that the NLL model applied to OT content could enhance KONDA of students in low and moderate SPK’s levels. Extra and more challenging didactical situation was needed for students in high SPK’s level to achieve the significant gain score.

Comprehensive Study of Plasma-Wall Sheath Transport Phenomena

DTIC Science & Technology

2016-10-26

function of the applied thermo-mechanical stress. An experiment was designed to test whether and how the process of plasma erosion might depend on ...of exposed surface, a, b) pretest height and laser image, c, d) post - test height and laser image. For the following analysis, a curve fit of the...normal to the ion beam. However, even with a one -dimensional simulation, features of a similar depth and profile to the post - test surface develop

Modelling physiological deterioration in post-operative patient vital-sign data.

PubMed

Pimentel, Marco A F; Clifton, David A; Clifton, Lei; Watkinson, Peter J; Tarassenko, Lionel

2013-08-01

Patients who undergo upper-gastrointestinal surgery have a high incidence of post-operative complications, often requiring admission to the intensive care unit several days after surgery. A dataset comprising observational vital-sign data from 171 post-operative patients taking part in a two-phase clinical trial at the Oxford Cancer Centre, was used to explore the trajectory of patients' vital-sign changes during their stay in the post-operative ward using both univariate and multivariate analyses. A model of normality based vital-sign data from patients who had a "normal" recovery was constructed using a kernel density estimate, and tested with "abnormal" data from patients who deteriorated sufficiently to be re-admitted to the intensive care unit. The vital-sign distributions from "normal" patients were found to vary over time from admission to the post-operative ward to their discharge home, but no significant changes in their distributions were observed from halfway through their stay on the ward to the time of discharge. The model of normality identified patient deterioration when tested with unseen "abnormal" data, suggesting that such techniques may be used to provide early warning of adverse physiological events.

Novel risk score of contrast-induced nephropathy after percutaneous coronary intervention.

PubMed

Ji, Ling; Su, XiaoFeng; Qin, Wei; Mi, XuHua; Liu, Fei; Tang, XiaoHong; Li, Zi; Yang, LiChuan

2015-08-01

Contrast-induced nephropathy (CIN) post-percutaneous coronary intervention (PCI) is a major cause of acute kidney injury. In this study, we established a comprehensive risk score model to assess risk of CIN after PCI procedure, which could be easily used in a clinical environment. A total of 805 PCI patients, divided into analysis cohort (70%) and validation cohort (30%), were enrolled retrospectively in this study. Risk factors for CIN were identified using univariate analysis and multivariate logistic regression in the analysis cohort. Risk score model was developed based on multiple regression coefficients. Sensitivity and specificity of the new risk score system was validated in the validation cohort. Comparisons between the new risk score model and previous reported models were applied. The incidence of post-PCI CIN in the analysis cohort (n = 565) was 12%. Considerably high CIN incidence (50%) was observed in patients with chronic kidney disease (CKD). Age >75, body mass index (BMI) >25, myoglobin level, cardiac function level, hypoalbuminaemia, history of chronic kidney disease (CKD), Intra-aortic balloon pump (IABP) and peripheral vascular disease (PVD) were identified as independent risk factors of post-PCI CIN. A novel risk score model was established using multivariate regression coefficients, which showed highest sensitivity and specificity (0.917, 95%CI 0.877-0.957) compared with previous models. A new post-PCI CIN risk score model was developed based on a retrospective study of 805 patients. Application of this model might be helpful to predict CIN in patients undergoing PCI procedure. © 2015 Asian Pacific Society of Nephrology.

Oseltamivir Treatment for Children with Influenza-Like Illness in China: A Cost-Effectiveness Analysis.

PubMed

Shen, Kunling; Xiong, Tengbin; Tan, Seng Chuen; Wu, Jiuhong

2016-01-01

Influenza is a common viral respiratory infection that causes epidemics and pandemics in the human population. Oseltamivir is a neuraminidase inhibitor-a new class of antiviral therapy for influenza. Although its efficacy and safety have been established, there is uncertainty regarding whether influenza-like illness (ILI) in children is best managed by oseltamivir at the onset of illness, and its cost-effectiveness in children has not been studied in China. To evaluate the cost-effectiveness of post rapid influenza diagnostic test (RIDT) treatment with oseltamivir and empiric treatment with oseltamivir comparing with no antiviral therapy against influenza for children with ILI. We developed a decision-analytic model based on previously published evidence to simulate and evaluate 1-year potential clinical and economic outcomes associated with three managing strategies for children presenting with symptoms of influenza. Model inputs were derived from literature and expert opinion of clinical practice and research in China. Outcome measures included costs and quality-adjusted life year (QALY). All the interventions were compared with incremental cost-effectiveness ratios (ICER). In base case analysis, empiric treatment with oseltamivir consistently produced the greatest gains in QALY. When compared with no antiviral therapy, the empiric treatment with oseltamivir strategy is very cost effective with an ICER of RMB 4,438. When compared with the post RIDT treatment with oseltamivir, the empiric treatment with oseltamivir strategy is dominant. Probabilistic sensitivity analysis projected that there is a 100% probability that empiric oseltamivir treatment would be considered as a very cost-effective strategy compared to the no antiviral therapy, according to the WHO recommendations for cost-effectiveness thresholds. The same was concluded with 99% probability for empiric oseltamivir treatment being a very cost-effective strategy compared to the post RIDT treatment with oseltamivir. In the Chinese setting of current health system, our modelling based simulation analysis suggests that empiric treatment with oseltamivir to be a cost-saving and very cost-effective strategy in managing children with ILI.

Mechanical properties and superficial characterization of a milled CAD-CAM glass fiber post.

PubMed

Ruschel, George Hebert; Gomes, Érica Alves; Silva-Sousa, Yara Terezinha; Pinelli, Rafaela Giedra Pirondi; Sousa-Neto, Manoel Damião; Pereira, Gabriel Kalil Rocha; Spazzin, Aloísio Oro

2018-06-01

Computer-aided design and computer-aided manufacturing (CAD-CAM) technology may be used to produce custom intraradicular posts, but studies are lacking. The purpose of this in vitro study was to evaluate the flexural properties (strength and modulus), failure mode, superficial morphology, and roughness of two CAD-CAM glass fiber posts (milled at different angulations) compared with a commercially available prefabricated glass fiber post. Three groups were tested (n = 10): PF (control group)- prefabricated glass fiber post; C-Cd-diagonally milled post; and C-Cv-vertically milled post. A 3-dimensional virtual image was obtained from a prefabricated post, which guided the posterior milling of posts from a glass fiber disk (Trilor Blanks; Bioloren). Surface roughness and morphology were evaluated using confocal laser microscopy. Flexural strength and modulus were evaluated with the 3-point bend test. Data were submitted to one-way analysis of variance followed by the Student-Newman-Keuls post hoc test (α = 0.05). The fractured surfaces were evaluated with scanning electron microscopy. The superficial roughness was highest for PF and similar for the experimental groups. Morphological analysis shows different sizes and directions of the glass fibers along the post. The flexural strength was highest for PF (900.1 ± 30.4 > C-Cd - 357.2 ± 30.7 > C-Cv 101.8 ± 4.3 MPa) as was the flexural modulus (PF 19.3 ± 2.0 GPa > C-Cv 10.1 ± 1.9 GPa > C-Cd 7.8 ± 1.3 GPa). A CAD-CAM milled post seems a promising development, but processing requires optimizing, as the prefabricated post still shows better mechanical properties and superficial characteristics. Copyright © 2018 Elsevier Ltd. All rights reserved.

The use of music to enhance reading skills of second grade students and students with reading disabilities.

PubMed

Register, Dena; Darrow, Alice-Ann; Standley, Jayne; Swedberg, Olivia

2007-01-01

The purpose of the present study was to determine the efficacy of using music as a remedial strategy to enhance the reading skills of second-grade students and students who have been identified as having a specific learning disability (SLD) in reading. First, an intensive short-term music curriculum was designed to target reading comprehension and vocabulary skills at the second grade level. The curriculum was then implemented in classrooms at two public schools in the Southeast. Reading skills were evaluated pre and post curriculum intervention via the vocabulary and reading comprehension subtests of the Gates-MacGinitie Reading Test for second grade. Analysis of pre/posttest data revealed that students with a specific disability in reading improved significantly from pre to post on all three subtests: word decoding (p = .04), word knowledge (p = .01), reading comprehension (p = .01), and test total (p = .01). Paired t-tests revealed that for 2nd grade students, both treatment and control classes improved significantly from pre to post on the subtests word decoding, word knowledge, and test total. While both classes made gains from pre to post on the subtest, reading comprehension, neither improved significantly. Analysis of Covariance revealed that the treatment class made greater gains pre to post than the control class on all 3 subtests (Including reading comprehension), and significantly greater gains on the subtest, word knowledge (p = .01).

GIS Modelling of Radionuclide Transport from the Semipalatinsk Test Site

NASA Astrophysics Data System (ADS)

Balakay, L.; Zakarin, E.; Mahura, A.; Baklanov, A.; Sorensen, J. H.

2009-04-01

In this study, the software complex GIS-project MigRad (Migration of Radionuclide) was developed, tested and applied for the territory of the Semipalatinsk test site/ polygon (Republic of Kazakhstan), where since 1961, in total 348 underground nuclear explosions were conducted. The MigRad is oriented on integration of large volumes of different information (mapping, ground-based, and satellite-based survey): and also includes modeling on its base local redistribution of radionuclides by precipitation and surface waters and by long-range transport of radioactive aerosols. The existing thermal anomaly on territory of the polygon was investigated in details, and the object-oriented analysis was applied for the studied area. Employing the RUNOFF model, the simulation of radionuclides migration with surface waters was performed. Employing the DERMA model, the simulation of long-term atmospheric transport, dispersion and deposition patterns for cesium was conducted from 3 selected locations (Balapan, Delegen, and Experimental Field). Employing geoinformation technology, the mapping of the of the high temperature zones and epicenters of radioactive aerosols transport for the territory of the test site was carried out with post-processing and integration of modelling results into GIS environment. Contamination levels of pollution due to former nuclear explosions for population and environment of the surrounding polygon territories of Kazakhstan as well as adjacent countries were analyzed and evaluated. The MigRad was designed as instrument for comprehensive analysis of complex territorial processes influenced by former nuclear explosions on the territory of Semipalatinsk test site. It provides possibilities in detailed analyses for (i) extensive cartographic material, remote sensing, and field measurements data collected in different level databases; (ii) radionuclide migration with flows using accumulation and redistribution of soil particles; (iii) thermal anomalies caused by explosions and observed on the test site and adjacent territories, and (iv) long-range transport of radioactive aerosols with analysis of dynamics of spatial distribution, averaged and accumulated fields for concentration and deposition patterns.

Spatial analysis of highway incident durations in the context of Hurricane Sandy.

PubMed

Xie, Kun; Ozbay, Kaan; Yang, Hong

2015-01-01

The objectives of this study are (1) to develop an incident duration model which can account for the spatial dependence of duration observations, and (2) to investigate the impacts of a hurricane on incident duration. Highway incident data from New York City and its surrounding regions before and after Hurricane Sandy was used for the study. Moran's I statistics confirmed that durations of the neighboring incidents were spatially correlated. Moreover, Lagrange Multiplier tests suggested that the spatial dependence should be captured in a spatial lag specification. A spatial error model, a spatial lag model and a standard model without consideration of spatial effects were developed. The spatial lag model is found to outperform the others by capturing the spatial dependence of incident durations via a spatially lagged dependent variable. It was further used to assess the effects of hurricane-related variables on incident duration. The results show that the incidents during and post the hurricane are expected to have 116.3% and 79.8% longer durations than those that occurred in the regular time. However, no significant increase in incident duration is observed in the evacuation period before Sandy's landfall. Results of temporal stability tests further confirm the existence of the significant changes in incident duration patterns during and post the hurricane. Those findings can provide insights to aid in the development of hurricane evacuation plans and emergency management strategies. Copyright © 2014 Elsevier Ltd. All rights reserved.

On the Post Hoc Power in Testing Mean Differences

ERIC Educational Resources Information Center

Yuan, Ke-Hai; Maxwell, Scott

2005-01-01

Retrospective or post hoc power analysis is recommended by reviewers and editors of many journals. Little literature has been found that gave a serious study of the post hoc power. When the sample size is large, the observed effect size is a good estimator of the true power. This article studies whether such a power estimator provides valuable…

Accelerated test plan for nickel cadmium spacecraft batteries

NASA Technical Reports Server (NTRS)

Hennigan, T. J.

1973-01-01

An accelerated test matrix is outlined that includes acceptance, baseline and post-cycling tests, chemical and physical analyses, and the data analysis procedures to be used in determining the feasibility of an accelerated test for sealed, nickel cadmium cells.

40 CFR 92.129 - Exhaust sample analysis.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the span drift between the pre-analysis and post-analysis checks on any range used may exceed 3...) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.129 Exhaust sample... and span each range to be used on each analyzer used prior to the beginning of the test sequence. The...

40 CFR 92.129 - Exhaust sample analysis.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the span drift between the pre-analysis and post-analysis checks on any range used may exceed 3... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.129 Exhaust... and span each range to be used on each analyzer used prior to the beginning of the test sequence. The...

40 CFR 92.129 - Exhaust sample analysis.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the span drift between the pre-analysis and post-analysis checks on any range used may exceed 3... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.129 Exhaust... and span each range to be used on each analyzer used prior to the beginning of the test sequence. The...

40 CFR 92.129 - Exhaust sample analysis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the span drift between the pre-analysis and post-analysis checks on any range used may exceed 3... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.129 Exhaust... and span each range to be used on each analyzer used prior to the beginning of the test sequence. The...

40 CFR 92.129 - Exhaust sample analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the span drift between the pre-analysis and post-analysis checks on any range used may exceed 3... (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92.129 Exhaust... and span each range to be used on each analyzer used prior to the beginning of the test sequence. The...

The impact of health insurance reform on insurance instability.

PubMed

Freund, Karen M; Isabelle, Alexis P; Hanchate, Amresh D; Kalish, Richard L; Kapoor, Alok; Bak, Sharon; Mishuris, Rebecca G; Shroff, Swati M; Battaglia, Tracy A

2014-02-01

We investigated the impact of the 2006 Massachusetts health care reform on insurance coverage and stability among minority and underserved women. We examined 36 months of insurance claims among 1,946 women who had abnormal cancer screening at six community health centers pre-(2004-2005) and post-(2007-2008) insurance reform. We examined frequency of switches in insurance coverage as measures of longitudinal insurance instability. On the date of their abnormal cancer screening test, 36% of subjects were publicly insured and 31% were uninsured. Post-reform, the percent ever uninsured declined from 39% to 29% (p .001) and those consistently uninsured declined from 23% to 16%. To assess if insurance instability changed between the pre- and post-reform periods, we conducted Poisson regression models, adjusted for patient demographics and length of time in care. These revealed no significant differences from the pre- to post-reform period in annual rates of insurance switches, incident rate ratio 0.98 (95%- CI 0.88-1.09). Our analysis is limited by changes in the populations in the pre- and post-reform period and inability to capture care outside of the health system network. Insurance reform increased stability as measured by decreasing uninsured rates without increasing insurance switches.

Post-Flight Evaluation of PICA and PICA-X - Comparisons of the Stardust SRC and Space-X Dragon 1 Forebody Heatshield Materials

NASA Technical Reports Server (NTRS)

Stackpoole, M.; Kao, D.; Qu, V.; Gonzales, G.

2013-01-01

Phenolic Impregnated Carbon Ablator (PICA) was developed at NASA Ames Research Center. As a thermal protection material, PICA has the advantages of being able to withstand high heat fluxes with a relatively low density. This ablative material was used as the forebody heat shield material for the Stardust sample return capsule, which re-entered the Earths atmosphere in 2006. Based on PICA, SpaceX developed a variant, PICA-X, and used it as the heat shield material for its Dragon spacecraft, which successfully orbited the Earth and re-entered the atmosphere during the COTS Demo Flight 1 in 2010. Post-flight analysis was previously performed on the Stardust PICA heat shield material. Similarly, a near-stagnation core was obtained from the post-flight Dragon 1 heat shield, which was retrieved from the Pacific Ocean. Materials testing and analyses were performed on the core to evaluate its ablation performance and post-flight properties. Comparisons between PICA and PICA-X are made where applicable. Stardust and Dragon offer rare opportunities to evaluate materials post-flight - this data is beneficial in understanding material performance and also improves modeling capabilities.

The Effect of Computer Models as Formative Assessment on Student Understanding of the Nature of Models

ERIC Educational Resources Information Center

Park, Mihwa; Liu, Xiufeng; Smith, Erica; Waight, Noemi

2017-01-01

This study reports the effect of computer models as formative assessment on high school students' understanding of the nature of models. Nine high school teachers integrated computer models and associated formative assessments into their yearlong high school chemistry course. A pre-test and post-test of students' understanding of the nature of…

On Fast Post-Processing of Global Positioning System Simulator Truth Data and Receiver Measurements and Solutions Data

NASA Technical Reports Server (NTRS)

Kizhner, Semion; Day, John H. (Technical Monitor)

2000-01-01

Post-processing of data, related to a GPS receiver test in a GPS simulator and test facility, is an important step towards qualifying a receiver for space flight. Although the GPS simulator provides all the parameters needed to analyze a simulation, as well as excellent analysis tools on the simulator workstation, post-processing is not a GPS simulator or receiver function alone, and it must be planned as a separate pre-flight test program requirement. A GPS simulator is a critical resource, and it is desirable to move off the pertinent test data from the simulator as soon as a test is completed. The receiver and simulator databases are used to extract the test data files for postprocessing. These files are then usually moved from the simulator and receiver systems to a personal computer (PC) platform, where post-processing is done typically using PC-based commercial software languages and tools. Because of commercial software systems generality their functions are notoriously slow and more than often are the bottleneck even for short duration simulator-based tests. There is a need to do post-processing faster and within an hour after test completion, including all required operations on the simulator and receiver to prepare and move off the post-processing files. This is especially significant in order to use the previous test feedback for the next simulation setup or to run near back-to-back simulation scenarios. Solving the post-processing timing problem is critical for a pre-flight test program success. Towards this goal an approach was developed that allows to speed-up post-processing by an order of a magnitude. It is based on improving the post-processing bottleneck function algorithm using a priory information that is specific to a GPS simulation application and using only the necessary volume of truth data. The presented postprocessing scheme was used in support of a few successful space flight missions carrying GPS receivers.

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post Ice group works on sea ice analysis from satellite, sea ice modeling, and ice-atmosphere-ocean / VISION | About EMC Analysis Drift Model KISS Model Numerical Forecast Systems The Polar and Great Lakes

How product trial changes quality perception of four new processed beef products.

PubMed

Saeed, Faiza; Grunert, Klaus G; Therkildsen, Margrethe

2013-01-01

The purpose of this paper is the quantitative analysis of the change in quality perception of four new processed beef products from pre to post trial phases. Based on the Total Food Quality Model, differences in pre and post-trial phases were measured using repeated measures technique for cue evaluation, quality evaluation and purchase motive fulfillment. For two of the tested products, trial resulted in a decline of the evaluation of cues, quality and purchase motive fulfillment compared to pre-trial expectations. For these products, positive expectations were created by giving information about ingredients and ways of processing, which were not confirmed during trial. For the other two products, evaluations on key sensory dimensions based on trial exceeded expectations, whereas the other evaluations remained unchanged. Several demographic factors influenced the pattern of results, notably age and gender, which may be due to underlying differences in previous experience. The study gives useful insights for testing of new processed meat products before market introduction. Copyright © 2012 Elsevier Ltd. All rights reserved.

Neuromathematical Trichotomous Mixed Methods Analysis: Using the Neuroscientific Tri-Squared Test Statistical Metric as a Post Hoc Analytic to Determine North Carolina School of Science and Mathematics Leadership Efficacy

ERIC Educational Resources Information Center

Osler, James Edward, II; Mason, Letita R.

2016-01-01

This study examines the leadership efficacy amongst graduates of The North Carolina School of Science and Mathematics (NCSSM) for the classes of 2000 through 2007 from a neuroscientific and neuromathematic perspective. NCSSM alumni (as the primary unit of analysis) were examined using a novel neuromathematic post hoc method of analysis. This study…

Treatment of premenstrual syndrome: Appraising the effectiveness of cognitive behavioral therapy in addition to calcium supplement plus vitamin D.

PubMed

Karimi, Zahra; Dehkordi, Mahnaz Aliakbari; Alipour, Ahmad; Mohtashami, Tayebeh

2018-03-01

Premenstrual syndrome (PMS) consists of repetitious physical and psychological symptoms. The symptoms occur during the luteal phase of the menstrual period and cease when the menstrual period starts. This study included pre-test and post-test experiments between a control group and a test group. The statistical population involved 40 females, chosen based on multistage cluster sampling. The participants were then divided into four groups to undergo treatment with calcium supplement plus vitamin D together with cognitive behavioral therapy (CBT), and were screened with the Premenstrual Syndrome Screening Test (PSST). The pre-test and post-test scores in the PSST, the General Health Questionnaire (GHQ-28), and Bell's Adjustment Inventory (BAI) were used as assessment tools (p < .05). According to the parameters of PMS symptoms, when evaluating the pre-test and post-test scores, the overall score of each individual in the experimental group was improved and a significant effect for the combination of calcium supplement plus vitamin D together with CBT was observed in comparison to the post-test control group. A comparison of multivariate analysis of covariance (MANCOVA) results collected from the pre-test and post-test scores revealed that the method of treatment was beneficial for PMS, adjustment, and general health. © 2018 The Institute of Psychology, Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.

Developing a new perspective to study the health of survivors of Sichuan earthquakes in China: a study on the effect of post-earthquake rescue policies on survivors’ health-related quality of life

PubMed Central

2013-01-01

Background Sichuan is a province in China with an extensive history of earthquakes. Recent earthquakes, including the Lushan earthquake in 2013, have resulted in thousands of people losing their homes and their families. However, there is a research gap on the efficiency of government support policies. Therefore, this study develops a new perspective to study the health of earthquake survivors, based on the effect of post-earthquake rescue policies on health-related quality of life (HRQOL) of survivors of the Sichuan earthquake. Methods This study uses data from a survey conducted in five hard-hit counties (Wenchuan, Qingchuan, Mianzhu, Lushan, and Dujiangyan) in Sichuan in 2013. A total of 2,000 questionnaires were distributed, and 1,672 were returned; the response rate was 83.6%. Results Results of the rescue policies scale and Medical Outcomes Study Short Form 36 (SF-36) scale passed the reliability test. The confirmatory factor analysis model showed that the physical component summary (PCS) directly affected the mental component summary (MCS). The results of structural equation model regarding the effects of rescue policies on HRQOL showed that the path coefficients of six policies (education, orphans, employment, poverty, legal, and social rescue policies) to the PCS of survivors were all positive and passed the test of significance. Finally, although only the path coefficient of the educational rescue policy to the MCS of survivors was positive and passed the test of significance, the other five policies affected the MCS indirectly through the PCS. Conclusions The general HRQOL of survivors is not ideal; the survivors showed a low satisfaction with the post-earthquake rescue policies. Further, the six post-earthquake rescue policies significantly improved the HRQOL of survivors and directly affected the promotion of the PCS of survivors. Aside from the educational rescue policy, all other policies affected the MCS indirectly through the PCS. This finding indicates relatively large differences in the effects of different post-earthquake rescue policies on the HRQOL of survivors. PMID:24168028

Developing a new perspective to study the health of survivors of Sichuan earthquakes in China: a study on the effect of post-earthquake rescue policies on survivors' health-related quality of life.

PubMed

Liang, Ying; Wang, Xiukun

2013-10-29

Sichuan is a province in China with an extensive history of earthquakes. Recent earthquakes, including the Lushan earthquake in 2013, have resulted in thousands of people losing their homes and their families. However, there is a research gap on the efficiency of government support policies. Therefore, this study develops a new perspective to study the health of earthquake survivors, based on the effect of post-earthquake rescue policies on health-related quality of life (HRQOL) of survivors of the Sichuan earthquake. This study uses data from a survey conducted in five hard-hit counties (Wenchuan, Qingchuan, Mianzhu, Lushan, and Dujiangyan) in Sichuan in 2013. A total of 2,000 questionnaires were distributed, and 1,672 were returned; the response rate was 83.6%. Results of the rescue policies scale and Medical Outcomes Study Short Form 36 (SF-36) scale passed the reliability test. The confirmatory factor analysis model showed that the physical component summary (PCS) directly affected the mental component summary (MCS). The results of structural equation model regarding the effects of rescue policies on HRQOL showed that the path coefficients of six policies (education, orphans, employment, poverty, legal, and social rescue policies) to the PCS of survivors were all positive and passed the test of significance. Finally, although only the path coefficient of the educational rescue policy to the MCS of survivors was positive and passed the test of significance, the other five policies affected the MCS indirectly through the PCS. The general HRQOL of survivors is not ideal; the survivors showed a low satisfaction with the post-earthquake rescue policies. Further, the six post-earthquake rescue policies significantly improved the HRQOL of survivors and directly affected the promotion of the PCS of survivors. Aside from the educational rescue policy, all other policies affected the MCS indirectly through the PCS. This finding indicates relatively large differences in the effects of different post-earthquake rescue policies on the HRQOL of survivors.

Factors affecting post-pubertal penile size in patients with hypospadias.

PubMed

Moriya, Kimihiko; Nakamura, Michiko; Nishimura, Yoko; Kitta, Takeya; Kanno, Yukiko; Chiba, Hiroki; Kon, Masafumi; Shinohara, Nobuo

2016-09-01

To evaluate actual post-pubertal penile size and factors affecting it in hypospadias patients, we retrospectively reviewed medical charts. Hypospadias patients whose external genitalia were categorized into Tanner stage 5, and whose stretched penile length was evaluated at 15 years old or older from April 2008 to April 2015, were enrolled in the present study. Stretched penile length was measured by a single examiner. Actual post-pubertal stretched penile length and factors affecting the post-pubertal stretched penile length were estimated. Statistical analysis was performed using Mann-Whitney U test and univariate and multivariate linear regression models for the determination of independent factors. Thirty patients met the inclusion criteria. Median age at evaluation was 17.2 years. Thirteen and 17 had mild and severe hypospadias, respectively. Endocrinological abnormality was identified in 5. Multivariate analysis showed that the severity of hypospadias and endocrinological abnormality were significant factors affecting stretched penile length. Stretched penile length in 25 patients without endocrinological abnormality was significantly longer than that in those with endocrinological abnormality (p = 0.036). Among patients without endocrinological abnormality, stretched penile length in 13 with severe hypospadias was significantly shorter than that in 12 with mild hypospadias (p = 0.004). While the severity of hypospadias and endocrinological abnormality at post-pubertal evaluation were factors affecting post-pubertal penile size, stretched penile length in patients with severe hypospadias was shorter even in cases without endocrinological abnormality. These results suggest that severe hypospadias is not only a disorder of urethral development, but also a disorder of penile development.

Experimental Traumatic Brain Injury Induces Bone Loss in Rats.

PubMed

Brady, Rhys D; Shultz, Sandy R; Sun, Mujun; Romano, Tania; van der Poel, Chris; Wright, David K; Wark, John D; O'Brien, Terence J; Grills, Brian L; McDonald, Stuart J

2016-12-01

Few studies have investigated the influence of traumatic brain injury (TBI) on bone homeostasis; however, pathophysiological mechanisms involved in TBI have potential to be detrimental to bone. The current study assessed the effect of experimental TBI in rats on the quantity and quality of two different weight-bearing bones, the femur and humerus. Rats were randomly assigned into either sham or lateral fluid percussion injury (FPI) groups. Open-field testing to assess locomotion was conducted at 1, 4, and 12 weeks post-injury, with the rats killed at 1 and 12 weeks post-injury. Bones were analyzed using peripheral quantitative computed tomography (pQCT), histomorphometric analysis, and three-point bending. pQCT analysis revealed that at 1 and 12 weeks post-injury, the distal metaphyseal region of femora from FPI rats had reduced cortical content (10% decrease at 1 week, 8% decrease at 12 weeks; p < 0.01) and cortical thickness (10% decrease at 1 week, 11% decrease at 12 weeks p < 0.001). There was also a 23% reduction in trabecular bone volume ratio at 1 week post-injury and a 27% reduction at 12 weeks post-injury in FPI rats compared to sham (p < 0.001). There were no differences in bone quantity and mechanical properties of the femoral midshaft between sham and TBI animals. There were no differences in locomotor outcomes, which suggested that post-TBI changes in bone were not attributed to immobility. Taken together, these findings indicate that this rat model of TBI was detrimental to bone and suggests a link between TBI and altered bone remodeling.

The efficacy of video feedback for learning the golf swing.

PubMed

Guadagnoli, M; Holcomb, W; Davis, M

2002-08-01

This study was designed to examine the efficacy of video instruction relative to that of verbal and self-guided instruction. Before training, 30 golfers were assigned at random to one of three groups: video, verbal or self-guided instruction. Video instruction was defined as a practice session in which the teacher was aided by the use of video. Verbal instruction was defined as practising with the teacher providing verbal feedback. Self-guided practice was defined as practising without the aid of a teacher. The participants had a pre-test, four 90 min practice sessions, an immediate post-test and a 2 week delayed post-test. During the pre-test and post-tests, all participants were required to strike 15 golf balls, with a 7-iron, from an artificial turf mat for distance and accuracy. The results showed that all groups were equal on the pre-test. On the first post-test, the two instruction groups performed worse than the self-guided group. However, on the second post-test, the two instruction groups performed better than the self-guided group, with the video group performing best. We interpret these results to mean that video analysis is an effective means of practice, but that the positive effects may take some time to develop.

Scientific method by argumentation design: learning process for maintaining student’s retention

NASA Astrophysics Data System (ADS)

Siswanto; Yusiran; Asriyadin; Gumilar, S.; Subali, B.

2018-03-01

The purpose of this research describes the effect of scientific methods designed by argumentation in maintaining retention of pre-service physics teachers (students) in mechanical concept. This learning consists of five stages including the first two stages namely observing and questioning. While the next three stages of reasoning, trying, and communicating are made of argumentation design. To know the effectiveness of treatment, students are given pre-test and post-test in one time. On the other hand, students were given advanced post-test to know the durability of retention as many as four times in four months. The results show that there was mean difference between pre-test and post-test based on the Wilcoxon test (z = -3.4, p=0.001). While the effectiveness of treatment is in the high category based on normalized gain values ( = 0.86). Meanwhile, mean difference of all post-test is significantly different based on Analysis of Varian (F = 365.63, p = 0.00). However, in the fourth month, students retention rates began to stabilize based on Tuckey’s HSD (p=0.074) for comparison of mean difference between fourth and fifth post-test. Overall, learning designed can maintain students retention within 4 months after the learning finish.

The state of Illinois obstetric hemorrhage project: pre-project and post-training examination scores.

PubMed

Wong, Cynthia A; Scott, Shirley; Jones, Robin L; Walzer, Jennifer; Geller, Stacie

2016-03-01

The Illinois Department of Public Health mandated that all clinicians who provide care to obstetric patients participate in the Illinois Obstetric Hemorrhage Project. The aim of the current report is to describe change in knowledge among providers engaged in the project, as assessed by pre- and post-tests. The project, implemented 2008 to 2010, included four components: a written 25-item multiple-choice examination (pre-test), a didactic lecture, skill stations (for teaching blood loss estimation), and a simulation drill and debriefing. Participants completed a post-test 6 months later. Pre- and post-test examination scores were compared. Data from 95 hospitals are included in this analysis (9456 paired test results). The proportion of participants who scored ≥88% correct answers increased from 10.9% on the pre-test to 49.1% on the post-test (p < 0.0001). Registered nurses made greater improvements in test scores than anesthesia and obstetric providers (p < 0.0001). The Illinois Obstetric Hemorrhage Project was successful in improving knowledge of obstetric hemorrhage in a large number of providers with different expertise and experience levels. Further long-term study is essential to determine whether the skills acquired during the Project contribute to improved obstetric hemorrhage outcomes for the women of Illinois.

Factors Associated with Student Plagiarism in a Post-1992 University

ERIC Educational Resources Information Center

Bennett, Roger

2005-01-01

A model intended to explain the incidence of plagiarism among undergraduates in the Business Studies department of a post-1992 university was constructed and tested on a sample of 249 students completing Business Studies units at a post-1992 university in Greater London. It was hypothesised that the occurrence of plagiarism could be predicted via…

Discrete post-processing of total cloud cover ensemble forecasts

NASA Astrophysics Data System (ADS)

Hemri, Stephan; Haiden, Thomas; Pappenberger, Florian

2017-04-01

This contribution presents an approach to post-process ensemble forecasts for the discrete and bounded weather variable of total cloud cover. Two methods for discrete statistical post-processing of ensemble predictions are tested. The first approach is based on multinomial logistic regression, the second involves a proportional odds logistic regression model. Applying them to total cloud cover raw ensemble forecasts from the European Centre for Medium-Range Weather Forecasts improves forecast skill significantly. Based on station-wise post-processing of raw ensemble total cloud cover forecasts for a global set of 3330 stations over the period from 2007 to early 2014, the more parsimonious proportional odds logistic regression model proved to slightly outperform the multinomial logistic regression model. Reference Hemri, S., Haiden, T., & Pappenberger, F. (2016). Discrete post-processing of total cloud cover ensemble forecasts. Monthly Weather Review 144, 2565-2577.

Analysis of the cephalometric changes in the first 3 months after spring-assisted cranioplasty for scaphocephaly.

PubMed

Ou Yang, O; Marucci, D D; Gates, R J; Rahman, M; Hunt, J; Gianoutsos, M P; Walsh, W R

2017-05-01

Spring-assisted cranioplasty (SAC) has become an accepted treatment for patients with sagittal craniosynostosis; however, the early effects of springs on skull dimensions have never been assessed with objective measurements in the literature. The present study evaluated the changes in skull dimensions and intracranial volume (ICV) during the first 3 months after SAC for sagittal synostosis. Sixteen patients with sagittal synostosis underwent SAC. The cephalic index (CI) and the distance between the spring foot plates were chronologically measured until spring removal at 3 months. Pre- and post-treatment CT scans available for 6 patients were used to assess changes in head shape. Thirteen patients underwent objective aesthetic assessment using pre- and post-operative photographs. Statistical analysis was performed using the linear mixed model for chronological data, t-test statistics for normative data comparisons and Wilcoxon's signed rank test for non-parametric data. For scaphocephalic patients, pre-operative and post-operative CIs were 0.70 and 0.74 (p = 0.001), respectively. Cranial widening towards normative values was observed (p = 0.0005). A continuous expansion in the distance between the spring foot plates was observed over the treatment period. Frontal and occipital angles were not affected by SAC despite apparent clinical improvements in frontal bossing and occipital prominence. CT analysis demonstrated relative reduction in the anterior cranial volume (p = 0.01) and relative expansion of the superior occipital volume (p = 0.03). Spring expansion was most marked in the hours following spring insertion. The expansion rate reduced to the minimum by day 1 post-operatively. Clinical benefits of SAC resulted from an increase in the bi-temporal width that camouflaged the frontal bossing. Improvement in occipital prominence was due to superior occipital volume expansion, allowing the occiput to remodel to a more rounded shape. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Development of an Integrated Hydrologic Modeling System for Rainfall-Runoff Simulation

NASA Astrophysics Data System (ADS)

Lu, B.; Piasecki, M.

2008-12-01

This paper aims to present the development of an integrated hydrological model which involves functionalities of digital watershed processing, online data retrieval, hydrologic simulation and post-event analysis. The proposed system is intended to work as a back end to the CUAHSI HIS cyberinfrastructure developments. As a first step into developing this system, a physics-based distributed hydrologic model PIHM (Penn State Integrated Hydrologic Model) is wrapped into OpenMI(Open Modeling Interface and Environment ) environment so as to seamlessly interact with OpenMI compliant meteorological models. The graphical user interface is being developed from the openGIS application called MapWindows which permits functionality expansion through the addition of plug-ins. . Modules required to set up through the GUI workboard include those for retrieving meteorological data from existing database or meteorological prediction models, obtaining geospatial data from the output of digital watershed processing, and importing initial condition and boundary condition. They are connected to the OpenMI compliant PIHM to simulate rainfall-runoff processes and includes a module for automatically displaying output after the simulation. Online databases are accessed through the WaterOneFlow web services, and the retrieved data are either stored in an observation database(OD) following the schema of Observation Data Model(ODM) in case for time series support, or a grid based storage facility which may be a format like netCDF or a grid-based-data database schema . Specific development steps include the creation of a bridge to overcome interoperability issue between PIHM and the ODM, as well as the embedding of TauDEM (Terrain Analysis Using Digital Elevation Models) into the model. This module is responsible for developing watershed and stream network using digital elevation models. Visualizing and editing geospatial data is achieved by the usage of MapWinGIS, an ActiveX control developed by MapWindow team. After applying to the practical watershed, the performance of the model can be tested by the post-event analysis module.

Induction of scratching behaviour in cats: efficacy of synthetic feline interdigital semiochemical.

PubMed

Cozzi, Alessandro; Lecuelle, Céline Lafont; Monneret, Philippe; Articlaux, Florence; Bougrat, Laurent; Mengoli, Manuel; Pageat, Patrick

2013-10-01

The aim of the study was to evaluate the effects of synthetic feline interdigital semiochemical (FIS) on the induction of scratching behaviour in cats during a standardised behavioural test. The trial was a randomised blinded study on a single group of subjects, following a crossover design. The scratching behaviour of 19 cats was evaluated during a standardised test in which cats were introduced to an area with one scratching post. Each cat acted as its own control (receiving, at random, FIS then placebo or vice versa). The test lasted for 5 mins, after which the cat was left alone in the test area. Duration, frequency of scratching and latency of first scratching behaviour were noted. Two independent observers analysed the videos. Thirty-eight tests were recorded with a different scratching post each time (two tests per cat). The scratching post with the semiochemical was more scratched in duration and frequency by the cats involved in the study (intention to treat analysis). The same conclusion was found using per-protocol analysis, which included only cats that scratched during the test. Regarding latency, no significant difference was found between treatment and placebo. The results seem of interest in explaining the role of a FIS in inducing scratching behaviour on a scratching post. The semiochemical approach can modify the choice of areas selected spontaneously by cats, and could be used either as a preventive measure for a cat arriving at home or to control or change an inappropriate scratching behaviour.

Pharmacological validation of individual animal locomotion, temperature and behavioural analysis in group-housed rats using a novel automated home cage analysis system: A comparison with the modified Irwin test.

PubMed

Tse, Karen; Sillito, Rowland; Keerie, Amy; Collier, Rachel; Grant, Claire; Karp, Natasha A; Vickers, Cathy; Chapman, Kathryn; Armstrong, J Douglas; Redfern, William S

2018-04-01

The ActualHCA™ system continuously monitors the activity, temperature and behavior of group-housed rats without invasive surgery. The system was validated to detect the contrasting effects of sedative and stimulant test agents (chlorpromazine, clonidine and amphetamine), and compared with the modified Irwin test (mIT) with rectal temperature measurements. Six male Han Wistar rats per group were used to assess each test agent and vehicle controls in separate ActualHCA™ recordings and mIT. The mIT was undertaken at 15, 30 mins, 1, 2, 4 and 24 h post-dose. ActualHCA™ recorded continuously for 24 h post-dose under 3 experimental conditions: dosed during light phase, dark phase, and light phase with a scheduled cage change at the time of peak effects determined by mIT. ActualHCA™ detected an increase stimulated activity from the cage change at 1-2 h post-dose which was obliterated by chlorpromazine and clonidine. Amphetamine increased activity up to 4 h post-dose in all conditions. Temperature from ActualHCA™ was affected by all test agents in all conditions. The mIT showed effects on all 3 test agents up to 4 h post-dose, with maximal effects at 1-2 h post-dose. The maximal effects on temperature from ActualHCA™ differed from mIT. Delayed effects on activity were detected by ActualHCA™, but not on mIT. Continuous monitoring has the advantage of capturing effects over time that may be missed with manual tests using pre-determined time points. This automated behavioural system does not replace the need for conventional methods but could be implemented simultaneously to improve our understanding of behavioural pharmacology. Copyright © 2018 Elsevier Inc. All rights reserved.

Detecting Intervention Effects in a Cluster-Randomized Design Using Multilevel Structural Equation Modeling for Binary Responses

PubMed Central

Cho, Sun-Joo; Preacher, Kristopher J.; Bottge, Brian A.

2015-01-01

Multilevel modeling (MLM) is frequently used to detect group differences, such as an intervention effect in a pre-test–post-test cluster-randomized design. Group differences on the post-test scores are detected by controlling for pre-test scores as a proxy variable for unobserved factors that predict future attributes. The pre-test and post-test scores that are most often used in MLM are summed item responses (or total scores). In prior research, there have been concerns regarding measurement error in the use of total scores in using MLM. To correct for measurement error in the covariate and outcome, a theoretical justification for the use of multilevel structural equation modeling (MSEM) has been established. However, MSEM for binary responses has not been widely applied to detect intervention effects (group differences) in intervention studies. In this article, the use of MSEM for intervention studies is demonstrated and the performance of MSEM is evaluated via a simulation study. Furthermore, the consequences of using MLM instead of MSEM are shown in detecting group differences. Results of the simulation study showed that MSEM performed adequately as the number of clusters, cluster size, and intraclass correlation increased and outperformed MLM for the detection of group differences. PMID:29881032

Human Neural Stem Cell Extracellular Vesicles Improve Recovery in a Porcine Model of Ischemic Stroke

PubMed Central

Webb, Robin L.; Kaiser, Erin E.; Jurgielewicz, Brian J.; Spellicy, Samantha; Scoville, Shelley L.; Thompson, Tyler A.; Swetenburg, Raymond L.; Hess, David C.; West, Franklin D.

2018-01-01

Background and Purpose— Recent work from our group suggests that human neural stem cell–derived extracellular vesicle (NSC EV) treatment improves both tissue and sensorimotor function in a preclinical thromboembolic mouse model of stroke. In this study, NSC EVs were evaluated in a pig ischemic stroke model, where clinically relevant end points were used to assess recovery in a more translational large animal model. Methods— Ischemic stroke was induced by permanent middle cerebral artery occlusion (MCAO), and either NSC EV or PBS treatment was administered intravenously at 2, 14, and 24 hours post-MCAO. NSC EV effects on tissue level recovery were evaluated via magnetic resonance imaging at 1 and 84 days post-MCAO. Effects on functional recovery were also assessed through longitudinal behavior and gait analysis testing. Results— NSC EV treatment was neuroprotective and led to significant improvements at the tissue and functional levels in stroked pigs. NSC EV treatment eliminated intracranial hemorrhage in ischemic lesions in NSC EV pigs (0 of 7) versus control pigs (7 of 8). NSC EV–treated pigs exhibited a significant decrease in cerebral lesion volume and decreased brain swelling relative to control pigs 1-day post-MCAO. NSC EVs significantly reduced edema in treated pigs relative to control pigs, as assessed by improved diffusivity through apparent diffusion coefficient maps. NSC EVs preserved white matter integrity with increased corpus callosum fractional anisotropy values 84 days post-MCAO. Behavior and mobility improvements paralleled structural changes as NSC EV–treated pigs exhibited improved outcomes, including increased exploratory behavior and faster restoration of spatiotemporal gait parameters. Conclusions— This study demonstrated for the first time that in a large animal model novel NSC EVs significantly improved neural tissue preservation and functional levels post-MCAO, suggesting NSC EVs may be a paradigm changing stroke therapeutic. PMID:29650593

Lung ultrasound accurately detects pneumothorax in a preterm newborn lamb model.

PubMed

Blank, Douglas A; Hooper, Stuart B; Binder-Heschl, Corinna; Kluckow, Martin; Gill, Andrew W; LaRosa, Domenic A; Inocencio, Ishmael M; Moxham, Alison; Rodgers, Karyn; Zahra, Valerie A; Davis, Peter G; Polglase, Graeme R

2016-06-01

Pneumothorax is a common emergency affecting extremely preterm. In adult studies, lung ultrasound has performed better than chest x-ray in the diagnosis of pneumothorax. The purpose of this study was to determine the efficacy of lung ultrasound (LUS) examination to detect pneumothorax using a preterm animal model. This was a prospective, observational study using newborn Border-Leicester lambs at gestational age = 126 days (equivalent to gestational age = 26 weeks in humans) receiving mechanical ventilation from birth to 2 h of life. At the conclusion of the experiment, LUS was performed, the lambs were then euthanised and a post-mortem exam was immediately performed. We used previously published ultrasound techniques to identify pneumothorax. Test characteristics of LUS to detect pneumothorax were calculated, using the post-mortem exam as the 'gold standard' test. Nine lambs (18 lungs) were examined. Four lambs had a unilateral pneumothorax, all of which were identified by LUS with no false positives. This was the first study to use post-mortem findings to test the efficacy of LUS to detect pneumothorax in a newborn animal model. Lung ultrasound accurately detected pneumothorax, verified by post-mortem exam, in premature, newborn lambs. © 2016 Paediatrics and Child Health Division (The Royal Australasian College of Physicians).

The White-test helps to reduce biliary leakage in liver resection: a systematic review and meta-analysis.

PubMed

Linke, Richard; Ulrich, Frank; Bechstein, Wolf O; Schnitzbauer, Andreas A

2015-01-01

Bile leakage testing may help to detect and reduce the incidence of biliary leakage after hepatic resection. This review was performed to investigate the value of the White-test in identifying intraoperative biliary leakage and avoiding postoperative leakage. A systematic review and meta-analysis was performed. Two researchers performed literature research. Primary outcome measure was the incidence of post-hepatectomy biliary leakage; secondary outcome measure was the ability of detecting intraoperative biliary leakage with the help of the White-test. A total of 4 publications (including original data from our center) were included in the analysis. Evidence levels of the included studies had medium quality of 2b (individual cohort studies including low quality randomized controlled trials). Use of the White-test led to a significant reduction of post-operative biliary leakage [OR: 0.3 (95% CI: 0.14, 0.63), p = 0.002] and led to a significant higher intraoperative detection of biliary leakages [OR: 0.03 (95%CI: 0.02, 0.07), p < 0.00001]. Existing evidence implicates the use of the White-test after hepatic resection to identify bile leaks intraoperatively and thus reduce incidence of post-operative biliary leakage. Nonetheless, there is a requirement for a high-quality randomized controlled trial with adequately powered sample-size to confirm findings from the above described studies and further increase evidence in this field.

Post-Flight Aerodynamic and Aerothermal Model Validation of a Supersonic Inflatable Aerodynamic Decelerator

NASA Technical Reports Server (NTRS)

Tang, Chun; Muppidi, Suman; Bose, Deepak; Van Norman, John W.; Tanimoto, Rebekah; Clark, Ian

2015-01-01

NASA's Low Density Supersonic Decelerator Program is developing new technologies that will enable the landing of heavier payloads in low density environments, such as Mars. A recent flight experiment conducted high above the Hawaiian Islands has demonstrated the performance of several decelerator technologies. In particular, the deployment of the Robotic class Supersonic Inflatable Aerodynamic Decelerator (SIAD-R) was highly successful, and valuable data were collected during the test flight. This paper outlines the Computational Fluid Dynamics (CFD) analysis used to estimate the aerodynamic and aerothermal characteristics of the SIAD-R. Pre-flight and post-flight predictions are compared with the flight data, and a very good agreement in aerodynamic force and moment coefficients is observed between the CFD solutions and the reconstructed flight data.

Stress distribution of endodontically treated teeth with titanium alloy post and carbon fiber post with different alveolar bone height: A three-dimensional finite element analysis.

PubMed

Singh, S Vijay; Bhat, Manohar; Gupta, Saurabh; Sharma, Deepak; Satija, Harsha; Sharma, Sumeet

2015-01-01

A three-dimensional (3D) finite element analysis (FEA) on the stress distribution of endodontically treated teeth with titanium alloy post and carbon fiber post with different alveolar bone height. The 3D model was fabricated using software to represent an endodontically treated mandibular second premolar with post and restored with a full ceramic crown restoration, which was then analyzed using FEA using FEA ANSYS Workbench V13.0 (ANSYS Inc., Canonsburg, Pennsylvania, U.S.A) software. The FEA showed the maximum stresses of 137.43 Mpa in dentin with alveolar bone height of 4 mm when the titanium post was used, 138.48 Mpa when carbon fiber post was used as compared to 105.91 Mpa in the model with alveolar bone height of 2 mm from the cement enamel junction (CEJ) when the titanium post was used and 107.37 Mpa when the carbon fiber post was used. Stress was observed more in alveolar bone height level of 4 mm from CEJ than 2 mm from CEJ. Stresses in the dentin were almost similar when the carbon fiber post was compared to titanium post. However, stresses in the post and the cement were much higher when titanium post was used as compared to carbon fiber post.

Estimating phosphorus concentrations following alum treatment using apparent settling velocity

USGS Publications Warehouse

Panuska, John; Robertson, Dale M.

2009-01-01

he apparent settling velocity (Vs) is a term used in empirical, steady-state, mass-balance lake models to represent the net phosphorus flux from the water column. The Vollenweider (1969) mixed-reactor lake model was rearranged and used to calculate Vs values for total phosphorus (TP) for three lakes treated with alum to reduce the internal flux of P to the water column (Delavan Lake, Wisconsin; Lake Morey, Vermont; and West Twin Lake, Ohio). An analysis of Vs values was conducted using data from these three lakes for both the pre- and post-alum treated conditions. Analysis of Vs values for both the pre- and post-alum conditions in Lake Morey and West Twin Lake resulted in a post-treatment mean Vs value of 7 ± 2.0 m·yr−1. The effect of the alum treatment, although short-lived in Delavan Lake, resulted in a mean post-treatment Vs value of 3.4 ± 0.3 m·yr−1. The consistency in the post-treatment Vs values in Lake Morey and West Twin Lake is used to demonstrate a predictive analysis method for water column TP concentrations in lakes following a successful treatment of the anoxic sediment area with alum. Additional pre- and post-alum in-lake and watershed loading data are needed to advance this concept into a management model.

EQUIFAT: A novel scoring system for the semi-quantitative evaluation of regional adipose tissues in Equidae.

PubMed

Morrison, Philippa K; Harris, Patricia A; Maltin, Charlotte A; Grove-White, Dai; Argo, Caroline McG

2017-01-01

Anatomically distinct adipose tissues represent variable risks to metabolic health in man and some other mammals. Quantitative-imaging of internal adipose depots is problematic in large animals and associations between regional adiposity and health are poorly understood. This study aimed to develop and test a semi-quantitative system (EQUIFAT) which could be applied to regional adipose tissues. Anatomically-defined, photographic images of adipose depots (omental, mesenteric, epicardial, rump) were collected from 38 animals immediately post-mortem. Images were ranked and depot-specific descriptors were developed (1 = no fat visible; 5 = excessive fat present). Nuchal-crest and ventro-abdominal-retroperitoneal adipose depot depths (cm) were transformed to categorical 5 point scores. The repeatability and reliability of EQUIFAT was independently tested by 24 observers. When half scores were permitted, inter-observer agreement was substantial (average κw: mesenteric, 0.79; omental, 0.79; rump 0.61) or moderate (average κw; epicardial, 0.60). Intra-observer repeatability was tested by 8 observers on 2 occasions. Kappa analysis indicated perfect (omental and mesenteric) and substantial agreement (epicardial and rump) between attempts. A further 207 animals were evaluated ante-mortem (age, height, breed-type, gender, body condition score [BCS]) and again immediately post-mortem (EQUIFAT scores, carcass weight). Multivariable, random effect linear regression models were fitted (breed as random effect; BCS as outcome variable). Only height, carcass weight, omental and retroperitoneal EQUIFAT scores remained as explanatory variables in the final model. The EQUIFAT scores developed here demonstrate clear functional differences between regional adipose depots and future studies could be directed towards describing associations between adiposity and disease risk in surgical and post-mortem situations.

EQUIFAT: A novel scoring system for the semi-quantitative evaluation of regional adipose tissues in Equidae

PubMed Central

Morrison, Philippa K.; Harris, Patricia A.; Maltin, Charlotte A.; Grove-White, Dai; Argo, Caroline McG.

2017-01-01

Anatomically distinct adipose tissues represent variable risks to metabolic health in man and some other mammals. Quantitative-imaging of internal adipose depots is problematic in large animals and associations between regional adiposity and health are poorly understood. This study aimed to develop and test a semi-quantitative system (EQUIFAT) which could be applied to regional adipose tissues. Anatomically-defined, photographic images of adipose depots (omental, mesenteric, epicardial, rump) were collected from 38 animals immediately post-mortem. Images were ranked and depot-specific descriptors were developed (1 = no fat visible; 5 = excessive fat present). Nuchal-crest and ventro-abdominal-retroperitoneal adipose depot depths (cm) were transformed to categorical 5 point scores. The repeatability and reliability of EQUIFAT was independently tested by 24 observers. When half scores were permitted, inter-observer agreement was substantial (average κw: mesenteric, 0.79; omental, 0.79; rump 0.61) or moderate (average κw; epicardial, 0.60). Intra-observer repeatability was tested by 8 observers on 2 occasions. Kappa analysis indicated perfect (omental and mesenteric) and substantial agreement (epicardial and rump) between attempts. A further 207 animals were evaluated ante-mortem (age, height, breed-type, gender, body condition score [BCS]) and again immediately post-mortem (EQUIFAT scores, carcass weight). Multivariable, random effect linear regression models were fitted (breed as random effect; BCS as outcome variable). Only height, carcass weight, omental and retroperitoneal EQUIFAT scores remained as explanatory variables in the final model. The EQUIFAT scores developed here demonstrate clear functional differences between regional adipose depots and future studies could be directed towards describing associations between adiposity and disease risk in surgical and post-mortem situations. PMID:28296956

A Mouse Model of Blast-Induced mild Traumatic Brain Injury

PubMed Central

Rubovitch, Vardit; Ten-Bosch, Meital; Zohar, Ofer; Harrison, Catherine R.; Tempel-Brami, Catherine; Stein, Elliot; Hoffer, Barry J.; Balaban, Carey D.; Schreiber, Shaul; Chiu, Wen-Ta; Pick, Chaim G.

2011-01-01

Improvised explosive devices (IEDs) are one of the main causes for casualties among civilians and military personnel in the present war against terror. Mild traumatic brain injury from IEDs induces various degrees of cognitive, emotional and behavioral disturbances but knowledge of the exact brain pathophysiology following exposure to blast is poorly understood. The study was aimed at establishing a murine model for a mild BI-TBI that isolates low-level blast pressure effects to the brain without systemic injuries. An open-field explosives detonation was used to replicate, as closely as possible, low-level blast trauma in the battlefield or at a terror-attack site. No alterations in basic neurological assessment or brain gross pathology were found acutely in the blast-exposed mice. At 7 days post blast, cognitive and behavioral tests revealed significantly decreased performance at both 4 and 7 meters distance from the blast (5.5 and 2.5 PSI, respectively). At 30 days post-blast, clear differences were found in animals at both distances in the object recognition test, and in the 7 m group in the Y maze test. Using MRI, T1 weighted images showed an increased BBB permeability one month post-blast. DTI analysis showed an increase in fractional anisotropy (FA) and a decrease in radial diffusivity. These changes correlated with sites of up-regulation of manganese superoxide dismutase 2 in neurons and CXC-motif chemokine receptor 3 around blood vessels in fiber tracts. These results may represent brain axonal and myelin abnormalities. Cellular and biochemical studies are underway in order to further correlate the blast-induced cognitive and behavioral changes and to identify possible underlying mechanisms that may help develop treatment- and neuroprotective modalities. PMID:21946269

Uptake contexts and perceived impacts of HIV testing and counselling among adults in East and Southern Africa: A meta-ethnographic review.

PubMed

Witzel, T Charles; Lora, Wezzie; Lees, Shelley; Desmond, Nicola

2017-01-01

HIV testing and counselling (HTC) interventions are key to controlling the HIV epidemic in East and Southern Africa where HTC is primarily delivered through voluntary counselling and testing (VCT), provider initiated testing and counselling (PITC), and home-based counselling and testing (HBVCT). Decision making processes around uptake of HTC models must be taken into account when designing new interventions. Counselling in HTC aims to reduce post-test risk taking behaviour and to link individuals to care but its efficacy is unclear. This meta-ethnography aims to understand the contexts of HTC uptake in East and Southern Africa and to analyse the perceived impacts of counselling-based interventions in relation to sexual behaviour and linkage to care. We conducted a systematic literature review of studies investigating HTC in East and Southern Africa from 2003 -April 2014. The search and additional snowballing identified 20 studies that fit our selection criteria. These studies were synthesised through a thematic framework analysis. Twenty qualitative and mixed-methods studies examining impacts of HTC models in East and Southern Africa were meta-synthesised. VCT decisions were made individually while HBVCT decisions were located in family and community units. PITC was associated with coercion from healthcare providers. Low quality counselling components and multiple-intersecting barriers faced by individuals mean that counselling in HTC was not perceived to be effective in reducing post-test risk behaviour and had limited perceived effect in facilitating linkage to care. HBVCT is associated with minimal stigma and should be considered as an area of priority. Counselling components in HTC interventions were effective in transmitting information about HIV and sexual risk, but were perceived as ineffective in addressing the broader personal circumstances preventing sexual behaviour change and modulating access to care.

Quantifying the test-retest reliability of cerebral blood flow measurements in a clinical model of on-going post-surgical pain: A study using pseudo-continuous arterial spin labelling.

PubMed

Hodkinson, Duncan J; Krause, Kristina; Khawaja, Nadine; Renton, Tara F; Huggins, John P; Vennart, William; Thacker, Michael A; Mehta, Mitul A; Zelaya, Fernando O; Williams, Steven C R; Howard, Matthew A

2013-01-01

Arterial spin labelling (ASL) is increasingly being applied to study the cerebral response to pain in both experimental human models and patients with persistent pain. Despite its advantages, scanning time and reliability remain important issues in the clinical applicability of ASL. Here we present the test-retest analysis of concurrent pseudo-continuous ASL (pCASL) and visual analogue scale (VAS), in a clinical model of on-going pain following third molar extraction (TME). Using ICC performance measures, we were able to quantify the reliability of the post-surgical pain state and ΔCBF (change in CBF), both at the group and individual case level. Within-subject, the inter- and intra-session reliability of the post-surgical pain state was ranked good-to-excellent (ICC > 0.6) across both pCASL and VAS modalities. The parameter ΔCBF (change in CBF between pre- and post-surgical states) performed reliably (ICC > 0.4), provided that a single baseline condition (or the mean of more than one baseline) was used for subtraction. Between-subjects, the pCASL measurements in the post-surgical pain state and ΔCBF were both characterised as reliable (ICC > 0.4). However, the subjective VAS pain ratings demonstrated a significant contribution of pain state variability, which suggests diminished utility for interindividual comparisons. These analyses indicate that the pCASL imaging technique has considerable potential for the comparison of within- and between-subjects differences associated with pain-induced state changes and baseline differences in regional CBF. They also suggest that differences in baseline perfusion and functional lateralisation characteristics may play an important role in the overall reliability of the estimated changes in CBF. Repeated measures designs have the important advantage that they provide good reliability for comparing condition effects because all sources of variability between subjects are excluded from the experimental error. The ability to elicit reliable neural correlates of on-going pain using quantitative perfusion imaging may help support the conclusions derived from subjective self-report.

Impacts of Base-Case and Post-Contingency Constraint Relaxations on Static and Dynamic Operational Security

NASA Astrophysics Data System (ADS)

Salloum, Ahmed

Constraint relaxation by definition means that certain security, operational, or financial constraints are allowed to be violated in the energy market model for a predetermined penalty price. System operators utilize this mechanism in an effort to impose a price-cap on shadow prices throughout the market. In addition, constraint relaxations can serve as corrective approximations that help in reducing the occurrence of infeasible or extreme solutions in the day-ahead markets. This work aims to capture the impact constraint relaxations have on system operational security. Moreover, this analysis also provides a better understanding of the correlation between DC market models and AC real-time systems and analyzes how relaxations in market models propagate to real-time systems. This information can be used not only to assess the criticality of constraint relaxations, but also as a basis for determining penalty prices more accurately. Constraint relaxations practice was replicated in this work using a test case and a real-life large-scale system, while capturing both energy market aspects and AC real-time system performance. System performance investigation included static and dynamic security analysis for base-case and post-contingency operating conditions. PJM peak hour loads were dynamically modeled in order to capture delayed voltage recovery and sustained depressed voltage profiles as a result of reactive power deficiency caused by constraint relaxations. Moreover, impacts of constraint relaxations on operational system security were investigated when risk based penalty prices are used. Transmission lines in the PJM system were categorized according to their risk index and each category was as-signed a different penalty price accordingly in order to avoid real-time overloads on high risk lines. This work also extends the investigation of constraint relaxations to post-contingency relaxations, where emergency limits are allowed to be relaxed in energy market models. Various scenarios were investigated to capture and compare between the impacts of base-case and post-contingency relaxations on real-time system performance, including the presence of both relaxations simultaneously. The effect of penalty prices on the number and magnitude of relaxations was investigated as well.

Beyond total treatment effects in randomised controlled trials: Baseline measurement of intermediate outcomes needed to reduce confounding in mediation investigations.

PubMed

Landau, Sabine; Emsley, Richard; Dunn, Graham

2018-06-01

Random allocation avoids confounding bias when estimating the average treatment effect. For continuous outcomes measured at post-treatment as well as prior to randomisation (baseline), analyses based on (A) post-treatment outcome alone, (B) change scores over the treatment phase or (C) conditioning on baseline values (analysis of covariance) provide unbiased estimators of the average treatment effect. The decision to include baseline values of the clinical outcome in the analysis is based on precision arguments, with analysis of covariance known to be most precise. Investigators increasingly carry out explanatory analyses to decompose total treatment effects into components that are mediated by an intermediate continuous outcome and a non-mediated part. Traditional mediation analysis might be performed based on (A) post-treatment values of the intermediate and clinical outcomes alone, (B) respective change scores or (C) conditioning on baseline measures of both intermediate and clinical outcomes. Using causal diagrams and Monte Carlo simulation, we investigated the performance of the three competing mediation approaches. We considered a data generating model that included three possible confounding processes involving baseline variables: The first two processes modelled baseline measures of the clinical variable or the intermediate variable as common causes of post-treatment measures of these two variables. The third process allowed the two baseline variables themselves to be correlated due to past common causes. We compared the analysis models implied by the competing mediation approaches with this data generating model to hypothesise likely biases in estimators, and tested these in a simulation study. We applied the methods to a randomised trial of pragmatic rehabilitation in patients with chronic fatigue syndrome, which examined the role of limiting activities as a mediator. Estimates of causal mediation effects derived by approach (A) will be biased if one of the three processes involving baseline measures of intermediate or clinical outcomes is operating. Necessary assumptions for the change score approach (B) to provide unbiased estimates under either process include the independence of baseline measures and change scores of the intermediate variable. Finally, estimates provided by the analysis of covariance approach (C) were found to be unbiased under all the three processes considered here. When applied to the example, there was evidence of mediation under all methods but the estimate of the indirect effect depended on the approach used with the proportion mediated varying from 57% to 86%. Trialists planning mediation analyses should measure baseline values of putative mediators as well as of continuous clinical outcomes. An analysis of covariance approach is recommended to avoid potential biases due to confounding processes involving baseline measures of intermediate or clinical outcomes, and not simply for increased precision.

Post-test navigation data analysis techniques for the shuttle ALT

NASA Technical Reports Server (NTRS)

1975-01-01

Postflight test analysis data processing techniques for shuttle approach and landing tests (ALT) navigation data are defined. Postfight test processor requirements are described along with operational and design requirements, data input requirements, and software test requirements. The postflight test data processing is described based on the natural test sequence: quick-look analysis, postflight navigation processing, and error isolation processing. Emphasis is placed on the tradeoffs that must remain open and subject to analysis until final definition is achieved in the shuttle data processing system and the overall ALT plan. A development plan for the implementation of the ALT postflight test navigation data processing system is presented. Conclusions are presented.

Measuring and Advancing Experimental Design Ability in an Introductory Course without Altering Existing Lab Curriculum.

PubMed

Shanks, Ryan A; Robertson, Chuck L; Haygood, Christian S; Herdliksa, Anna M; Herdliska, Heather R; Lloyd, Steven A

2017-01-01

Introductory biology courses provide an important opportunity to prepare students for future courses, yet existing cookbook labs, although important in their own way, fail to provide many of the advantages of semester-long research experiences. Engaging, authentic research experiences aid biology students in meeting many learning goals. Therefore, overlaying a research experience onto the existing lab structure allows faculty to overcome barriers involving curricular change. Here we propose a working model for this overlay design in an introductory biology course and detail a means to conduct this lab with minimal increases in student and faculty workloads. Furthermore, we conducted exploratory factor analysis of the Experimental Design Ability Test (EDAT) and uncovered two latent factors which provide valid means to assess this overlay model's ability to increase advanced experimental design abilities. In a pre-test/post-test design, we demonstrate significant increases in both basic and advanced experimental design abilities in an experimental and comparison group. We measured significantly higher gains in advanced experimental design understanding in students in the experimental group. We believe this overlay model and EDAT factor analysis contribute a novel means to conduct and assess the effectiveness of authentic research experiences in an introductory course without major changes to the course curriculum and with minimal increases in faculty and student workloads.

Distress among women receiving uninformative BRCA1/2 results: 12-month outcomes.

PubMed

O'Neill, Suzanne C; Rini, Christine; Goldsmith, Rachel E; Valdimarsdottir, Heiddis; Cohen, Lawrence H; Schwartz, Marc D

2009-10-01

Few data are available regarding the long-term psychological impact of uninformative BRCA1/2 test results. This study examines change in distress from pretesting to 12-months post-disclosure, with medical, family history, and psychological variables, such as pretesting perceived risk of carrying a deleterious mutation prior to testing and primary and secondary appraisals, as predictors. Two hundred and nine women with uninformative BRCA1/2 test results completed questionnaires at pretesting and 1-, 6-, and 12-month post-disclosure, including measures of anxiety and depression, cancer-specific and genetic testing distress. We used a mixed models approach to predict change in post-disclosure distress. Distress declined from pretesting to 1-month post-disclosure, but remained stable thereafter. Primary appraisals predicted all types of distress at 1-month post-disclosure. Primary and secondary appraisals predicted genetic testing distress at 1-month as well as change over time. Receiving a variant of uncertain clinical significance and entering testing with a high expectation for carrying a deleterious mutation predicted genetic testing distress that persisted through the year after testing. As a whole, women receiving uninformative BRCA1/2 test results are a resilient group. For some women, distress experienced in the month after testing does not dissipate. Variables, such as heightened pretesting perceived risk and cognitive appraisals, predict greater likelihood for sustained distress in this group and could be amenable to intervention.

Knock down of Whitefly Gut Gene Expression and Mortality by Orally Delivered Gut Gene-Specific dsRNAs.

PubMed

Vyas, Meenal; Raza, Amir; Ali, Muhammad Yousaf; Ashraf, Muhammad Aleem; Mansoor, Shahid; Shahid, Ahmad Ali; Brown, Judith K

2017-01-01

Control of the whitefly Bemisia tabaci (Genn.) agricultural pest and plant virus vector relies on the use of chemical insecticides. RNA-interference (RNAi) is a homology-dependent innate immune response in eukaryotes, including insects, which results in degradation of the corresponding transcript following its recognition by a double-stranded RNA (dsRNA) that shares 100% sequence homology. In this study, six whitefly 'gut' genes were selected from an in silico-annotated transcriptome library constructed from the whitefly alimentary canal or 'gut' of the B biotype of B. tabaci, and tested for knock down efficacy, post-ingestion of dsRNAs that share 100% sequence homology to each respective gene target. Candidate genes were: Acetylcholine receptor subunit α, Alpha glucosidase 1, Aquaporin 1, Heat shock protein 70, Trehalase1, and Trehalose transporter1. The efficacy of RNAi knock down was further tested in a gene-specific functional bioassay, and mortality was recorded in 24 hr intervals, six days, post-treatment. Based on qPCR analysis, all six genes tested showed significantly reduced gene expression. Moderate-to-high whitefly mortality was associated with the down-regulation of osmoregulation, sugar metabolism and sugar transport-associated genes, demonstrating that whitefly survivability was linked with RNAi results. Silenced Acetylcholine receptor subunit α and Heat shock protein 70 genes showed an initial low whitefly mortality, however, following insecticide or high temperature treatments, respectively, significantly increased knockdown efficacy and death was observed, indicating enhanced post-knockdown sensitivity perhaps related to systemic silencing. The oral delivery of gut-specific dsRNAs, when combined with qPCR analysis of gene expression and a corresponding gene-specific bioassay that relates knockdown and mortality, offers a viable approach for functional genomics analysis and the discovery of prospective dsRNA biopesticide targets. The approach can be applied to functional genomics analyses to facilitate, species-specific dsRNA-mediated control of other non-model hemipterans.

Comparison of L1 and L2 Pre and Post Writing Samples of Bilingual Students.

ERIC Educational Resources Information Center

Reyes, Maria de la Luz

A sample of 15 eighth-grade Hispanic students in a bilingual classroom were used for a descriptive analysis of students' writing samples to compare their growth between pre- and post- writing samples in Spanish and English. This was accomplished by juxtaposing English and Spanish pre- and post-tests using the same holistic rubric developed by the…

Development of the performance confirmation program at YUCCA mountain, nevada

USGS Publications Warehouse

LeCain, G.D.; Barr, D.; Weaver, D.; Snell, R.; Goodin, S.W.; Hansen, F.D.

2006-01-01

The Yucca Mountain Performance Confirmation program consists of tests, monitoring activities, experiments, and analyses to evaluate the adequacy of assumptions, data, and analyses that form the basis of the conceptual and numerical models of flow and transport associated with a proposed radioactive waste repository at Yucca Mountain, Nevada. The Performance Confirmation program uses an eight-stage risk-informed, performance-based approach. Selection of the Performance Confirmation activities for inclusion in the Performance Confirmation program was done using a risk-informed performance-based decision analysis. The result of this analysis was a Performance Confirmation base portfolio that consists of 20 activities. The 20 Performance Confirmation activities include geologic, hydrologie, and construction/engineering testing. Some of the activities began during site characterization, and others will begin during construction, or post emplacement, and continue until repository closure.

Assessment of Biomarkers Associated with Joint Injury and Subsequent Post-Traumatic Arthritis

DTIC Science & Technology

2016-12-01

models of the patella and patellar cartilage (Geomagic Studio, Research Triangle Park, NC). Changes in cartilage thickness between post -operative... quantitative scales, and "Assessment of Biomarkers Associated with Joint Injury and Subsequent Post -Traumatic Arthritis" Start date: 9/30/2012 PIs...Geomagic®). Positive and negative deviations of the bone surface were measured, and defined as the distance to a test surface ( post -fx bone surface

Ready to learn physics: a team-based learning model for first year university

NASA Astrophysics Data System (ADS)

Parappilly, Maria; Schmidt, Lisa; De Ritter, Samantha

2015-09-01

Team-based learning (TBL) is an established model of group work which aims to improve students' ability to apply discipline-related content. TBL consists of a readiness assurance process (RAP), student groups and application activities. While TBL has not been implemented widely in science, technology, engineering and mathematics disciplines, it has been effective in improving student learning in other disciplines. This paper describes the incorporation of TBL activities into a non-calculus based introductory level physics topic—Physics for the Modern World. Students were given pre-class preparation materials and an individual RAP online test before the workshops. The pre-workshop individual RAP test ensured that all students were exposed to concept-based questions before their workshops and motivated them to use the preparatory materials in readiness for the workshop. The students were placed into random teams and during the first part of the workshop, the teams went through a subset of the quiz questions (team RAP test) and in the remaining time, teams completed an in-class assignment. After the workshop students were allowed another attempt at the individual RAP test to see if their knowledge had improved. The ability of TBL to promote student learning of key concepts was evaluated by experiment using pre- and post- testing. The students’ perception of TBL was monitored by discussion posts and survey responses. Finally, the ability of TBL to support peer-peer interaction was evaluated by video analysis of the class. We found that the TBL process improved student learning; students did interact with each other in class; and the students had a positive view of TBL. To assess the transferability of this model to other topics, we conducted a comparison study with an environmental science topic which produced similar results. Our study supports the use of this TBL model in science topics.

Thinking outside ISD: A management model for instructional design

NASA Astrophysics Data System (ADS)

Taylor, Tony Dewayne

The purpose of this study was to examine the effectiveness of an instructional system management-level model proposed by the author designed to orchestrate the efficient development and implementation of customer requested curriculum. The three phases of systems-based model are designed to ensure delivery of high quality and timely instruction are: (1) the assessment and documentation of organizational training requirements; (2) project management control of curriculum development; and (3) the implementation of relevant instruction by competent instructors. This model also provides (4) measurable and quantifiable course evaluation results to justify return on investment and validate its importance with respect to the customer's organizational strategic objectives. The theoretical approach for this study was systems theory-based due to the nature of the instructional systems design model and the systematic design of the management model. The study was accomplished using single-case study application of qualitative style of inquiry as described by Patton (2002). Qualitative inquiry was selected to collect and analyze participant holistic perspective assessment of effectiveness, relevance, and timeliness of the instructional design management model. Participants for this study included five managers, five subject matter experts, and six students assigned to a military organization responsible for the collection of hydrographic data for the U.S. Navy. Triangulation of data sources within the qualitative framework of the study incorporated the three participant groups---managers, SMEs, and students---incorporated multiple views of the course development and implementation to validate the findings and the remove researcher bias. Qualitative coding was accomplished by importing transcribed interviews into Microsoft Excel and sorted using Auto-Filter. The coded interviews indicated effective functionality in the views of the model from each of the three participant groups. Results from a pre-test/post-test comparative analysis indicated a significant difference between the pre-test and post-test mean at the p < .001 for the six students. Although the subject of the case study was within a military training environment, the application of the proposed instructional systems managerial model can be applied to the design, development, delivery, and assessment of instructional material in any line of study where quantifiable effective learning is the goal.

Pre- and post-flight-test models versus measured skyship-500 control responses

NASA Technical Reports Server (NTRS)

Jex, Henry R.; Magdaleno, Raymond E.; Gelhausen, Paul; Tischler, Mark B.

1987-01-01

The dynamical equations-of-motion (EOM) for cruising airships require nonconventional terms to account for buoyancy and apparent-mass-effects, but systematic validation of these equations against flight data is not available. Using a candidate set of EOM, three comparisons are made with carefully-measured describing functions derived from frequency-sweep flight tests on the Skyship-500 airship. The first compares the pre-flight predictions to the data; the second compares the 'best-fit' equations to data at each of two airspeeds and the third compared the ability to extrapolate from one condition to another via airship-specific scaling laws. Two transient responses are also compared. The generally good results demonstrate that fairly simple, perturbation equation models are adequate for many types of flight-control analysis and flying quality evaluations of cruising airships.

Independent Prognostic Factors for Acute Organophosphorus Pesticide Poisoning.

PubMed

Tang, Weidong; Ruan, Feng; Chen, Qi; Chen, Suping; Shao, Xuebo; Gao, Jianbo; Zhang, Mao

2016-07-01

Acute organophosphorus pesticide poisoning (AOPP) is becoming a significant problem and a potential cause of human mortality because of the abuse of organophosphate compounds. This study aims to determine the independent prognostic factors of AOPP by using multivariate logistic regression analysis. The clinical data for 71 subjects with AOPP admitted to our hospital were retrospectively analyzed. This information included the Acute Physiology and Chronic Health Evaluation II (APACHE II) scores, 6-h post-admission blood lactate levels, post-admission 6-h lactate clearance rates, admission blood cholinesterase levels, 6-h post-admission blood cholinesterase levels, cholinesterase activity, blood pH, and other factors. Univariate analysis and multivariate logistic regression analyses were conducted to identify all prognostic factors and independent prognostic factors, respectively. A receiver operating characteristic curve was plotted to analyze the testing power of independent prognostic factors. Twelve of 71 subjects died. Admission blood lactate levels, 6-h post-admission blood lactate levels, post-admission 6-h lactate clearance rates, blood pH, and APACHE II scores were identified as prognostic factors for AOPP according to the univariate analysis, whereas only 6-h post-admission blood lactate levels, post-admission 6-h lactate clearance rates, and blood pH were independent prognostic factors identified by multivariate logistic regression analysis. The receiver operating characteristic analysis suggested that post-admission 6-h lactate clearance rates were of moderate diagnostic value. High 6-h post-admission blood lactate levels, low blood pH, and low post-admission 6-h lactate clearance rates were independent prognostic factors identified by multivariate logistic regression analysis. Copyright © 2016 by Daedalus Enterprises.

10 CFR 709.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... test data analysis phase, and the post-test phase. Polygraph examination records means all records of... DOE's National Nuclear Security Administration. No opinion means an evaluation of a polygraph test by... test) during a specific series of interactions, including the pretest interview, the use of the...

10 CFR 709.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... test data analysis phase, and the post-test phase. Polygraph examination records means all records of... DOE's National Nuclear Security Administration. No opinion means an evaluation of a polygraph test by... test) during a specific series of interactions, including the pretest interview, the use of the...

10 CFR 709.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... test data analysis phase, and the post-test phase. Polygraph examination records means all records of... DOE's National Nuclear Security Administration. No opinion means an evaluation of a polygraph test by... test) during a specific series of interactions, including the pretest interview, the use of the...

Retention of basic life support knowledge, self-efficacy and chest compression performance in Thai undergraduate nursing students.

PubMed

Partiprajak, Suphamas; Thongpo, Pichaya

2016-01-01

This study explored the retention of basic life support knowledge, self-efficacy, and chest compression performance among Thai nursing students at a university in Thailand. A one-group, pre-test and post-test design time series was used. Participants were 30 nursing students undertaking basic life support training as a care provider. Repeated measure analysis of variance was used to test the retention of knowledge and self-efficacy between pre-test, immediate post-test, and re-test after 3 months. A Wilcoxon signed-rank test was used to compare the difference in chest compression performance two times. Basic life support knowledge was measured using the Basic Life Support Standard Test for Cognitive Knowledge. Self-efficacy was measured using the Basic Life Support Self-Efficacy Questionnaire. Chest compression performance was evaluated using a data printout from Resusci Anne and Laerdal skillmeter within two cycles. The training had an immediate significant effect on the knowledge, self-efficacy, and skill of chest compression; however, the knowledge and self-efficacy significantly declined after post-training for 3 months. Chest compression performance after training for 3 months was positively retaining compared to the first post-test but was not significant. Therefore, a retraining program to maintain knowledge and self-efficacy for a longer period of time should be established after post-training for 3 months. Copyright © 2015 Elsevier Ltd. All rights reserved.

Numerical wind-tunnel simulation for Spar platform

NASA Astrophysics Data System (ADS)

Shen, Wenjun

2017-05-01

ANSYS Fluent software is used in the simulation analysis of numerical wind tunnel model for the upper Spar platform module. Design Modeler (DM), Meshing, FLUENT and CFD-POST are chosen in the numerical calculation. And DM is used to deal with and repair the geometric model, and Meshing is used to mesh the model, Fluent is used to set up and solve the calculation condition, finally CFD-POST is used for post-processing of the results. The wind loads are obtained under different direction and incidence angles. Finally, comparison is made between numerical results and empirical formula.

Testing the Community-Based Learning Collaborative (CBLC) implementation model: a study protocol.

PubMed

Hanson, Rochelle F; Schoenwald, Sonja; Saunders, Benjamin E; Chapman, Jason; Palinkas, Lawrence A; Moreland, Angela D; Dopp, Alex

2016-01-01

High rates of youth exposure to violence, either through direct victimization or witnessing, result in significant health/mental health consequences and high associated lifetime costs. Evidence-based treatments (EBTs), such as Trauma-Focused Cognitive Behavioral Therapy (TF-CBT), can prevent and/or reduce these negative effects, yet these treatments are not standard practice for therapists working with children identified by child welfare or mental health systems as needing services. While research indicates that collaboration among child welfare and mental health services sectors improves availability and sustainment of EBTs for children, few implementation strategies designed specifically to promote and sustain inter-professional collaboration (IC) and inter-organizational relationships (IOR) have undergone empirical investigation. A potential candidate for evaluation is the Community-Based Learning Collaborative (CBLC) implementation model, an adaptation of the Learning Collaborative which includes strategies designed to develop and strengthen inter-professional relationships between brokers and providers of mental health services to promote IC and IOR and achieve sustained implementation of EBTs for children within a community. This non-experimental, mixed methods study involves two phases: (1) analysis of existing prospective quantitative and qualitative quality improvement and project evaluation data collected pre and post, weekly, and monthly from 998 participants in one of seven CBLCs conducted as part of a statewide initiative; and (2) Phase 2 collection of new quantitative and qualitative (key informant interviews) data during the funded study period to evaluate changes in relations among IC, IOR, social networks and the penetration and sustainment of TF-CBT in targeted communities. Recruitment for Phase 2 is from the pool of 998 CBLC participants to achieve a targeted enrollment of n = 150. Study aims include: (1) Use existing quality improvement (weekly/monthly online surveys; pre-post surveys; interviews) and newly collected quantitative (monthly surveys) and qualitative (key informant interviews) data and social network analysis to test whether CBLC strategies are associated with penetration and sustainment of TF-CBT; and (2) Use existing quantitative quality improvement (weekly/monthly on-line surveys; pre/post surveys) and newly collected qualitative (key informant interviews) data and social network analysis to test whether CBLC strategies are associated with increased IOR and IC intensity. The proposed research leverages an on-going, statewide implementation initiative to generate evidence about implementation strategies needed to make trauma-focused EBTs more accessible to children. This study also provides feasibility data to inform an effectiveness trial that will utilize a time-series design to rigorously evaluate the CBLC model as a mechanism to improve access and sustained use of EBTs for children.

Investigation of representing hysteresis in macroscopic models of two-phase flow in porous media using intermediate scale experimental data

NASA Astrophysics Data System (ADS)

Cihan, Abdullah; Birkholzer, Jens; Trevisan, Luca; Gonzalez-Nicolas, Ana; Illangasekare, Tissa

2017-01-01

Incorporating hysteresis into models is important to accurately capture the two phase flow behavior when porous media systems undergo cycles of drainage and imbibition such as in the cases of injection and post-injection redistribution of CO2 during geological CO2 storage (GCS). In the traditional model of two-phase flow, existing constitutive models that parameterize the hysteresis associated with these processes are generally based on the empirical relationships. This manuscript presents development and testing of mathematical hysteretic capillary pressure—saturation—relative permeability models with the objective of more accurately representing the redistribution of the fluids after injection. The constitutive models are developed by relating macroscopic variables to basic physics of two-phase capillary displacements at pore-scale and void space distribution properties. The modeling approach with the developed constitutive models with and without hysteresis as input is tested against some intermediate-scale flow cell experiments to test the ability of the models to represent movement and capillary trapping of immiscible fluids under macroscopically homogeneous and heterogeneous conditions. The hysteretic two-phase flow model predicted the overall plume migration and distribution during and post injection reasonably well and represented the postinjection behavior of the plume more accurately than the nonhysteretic models. Based on the results in this study, neglecting hysteresis in the constitutive models of the traditional two-phase flow theory can seriously overpredict or underpredict the injected fluid distribution during post-injection under both homogeneous and heterogeneous conditions, depending on the selected value of the residual saturation in the nonhysteretic models.

Post-Flight Assessment of Low Density Supersonic Decelerator Flight Dynamics Test 2 Simulation

NASA Technical Reports Server (NTRS)

Dutta, Soumyo; Bowes, Angela L.; White, Joseph P.; Striepe, Scott A.; Queen, Eric M.; O'Farrel, Clara; Ivanov, Mark C.

2016-01-01

NASA's Low Density Supersonic Decelerator (LDSD) project conducted its second Supersonic Flight Dynamics Test (SFDT-2) on June 8, 2015. The Program to Optimize Simulated Trajectories II (POST2) was one of the flight dynamics tools used to simulate and predict the flight performance and was a major tool used in the post-flight assessment of the flight trajectory. This paper compares the simulation predictions with the reconstructed trajectory. Additionally, off-nominal conditions seen during flight are modeled in the simulation to reconcile the predictions with flight data. These analyses are beneficial to characterize the results of the flight test and to improve the simulation and targeting of the subsequent LDSD flights.

The effectiveness of CPI model to improve positive attitude toward science (PATS) for pre-service physics teacher

NASA Astrophysics Data System (ADS)

Sunarti, T.; Wasis; Madlazim; Suyidno; Prahani, B. K.

2018-03-01

In the previous research, learning material based Construction, Production, and Implementation (CPI) model has been developed to improve scientific literacy and positive attitude toward science for pre-service physics teacher. CPI model has 4 phases, included: 1) Motivation; 2) Construction (Cycle I); 3) Production (Cycle II); and 4) Evaluation. This research is aimed to analyze the effectiveness of CPI model towards the improvement Positive Attitude toward Science (PATS) for pre-service physics teacher. This research used one group pre-test and post-test design on 160 pre-service physics teacher divided into 4 groups at Lambung Mangkurat University and Surabaya State University (Indonesia), academic year 2016/2017. Data collection was conducted through questioner, observation, and interview. Positive attitude toward science for pre-service physics teacher measurement were conducted through Positive Attitude toward Science Evaluation Sheet (PATSES). The data analysis technique was done by using Wilcoxon test and n-gain. The results showed that there was a significant increase in positive attitude toward science for pre-service physics teacher at α = 5%, with n-gain average of high category. Thus, the CPI model is effective for improving positive attitude toward science for pre-service physics teacher.

Development and preliminary validation of a post-fistula repair reintegration instrument among Ugandan women.

PubMed

El Ayadi, Alison; Nalubwama, Hadija; Barageine, Justus; Neilands, Torsten B; Obore, Susan; Byamugisha, Josaphat; Kakaire, Othman; Mwanje, Haruna; Korn, Abner; Lester, Felicia; Miller, Suellen

2017-09-02

Obstetric fistula is a debilitating and traumatic birth injury affecting 2-3 million women globally, mostly in sub-Saharan Africa and Asia. Affected women suffer physically, psychologically and socioeconomically. International efforts have increased access to surgical treatment, yet attention to a holistic outcome of post-surgical rehabilitation is nascent. We sought to develop and pilot test a measurement instrument to assess post-surgical family and community reintegration. We conducted an exploratory sequential mixed-methods study, beginning with 16 in-depth interviews and four focus group discussions with 17 women who underwent fistula surgery within two previous years to inform measure development. The draft instrument was validated in a longitudinal cohort of 60 women recovering from fistula surgery. Qualitative data were analyzed through thematic analysis. Socio-demographic characteristics were described using one-way frequency tables. We used exploratory factor analysis to determine the latent structure of the scale, then tested the fit of a single higher-order latent factor. We evaluated internal consistency and temporal stability reliability through Raykov's ρ and Pearson's correlation coefficient, respectively. We estimated a series of linear regression models to explore associations between the standardized reintegration measure and validated scales representing theoretically related constructs. Themes central to women's experiences following surgery included resuming mobility, increasing social interaction, improved self-esteem, reduction of internalized stigma, resuming work, meeting their own needs and the needs of dependents, meeting other expected and desired roles, and negotiating larger life issues. We expanded the Return to Normal Living Index to reflect these themes. Exploratory factor analysis suggested a four-factor structure, titled 'Mobility and social engagement', 'Meeting family needs', 'Comfort with relationships', and 'General life satisfaction', and goodness of fit statistics supported a higher-order latent variable of 'Reintegration.' Reintegration score correlated significantly with quality of life, depression, self-esteem, stigma, and social support in theoretically expected directions. As more women undergo surgical treatment for obstetric fistula, attention to the post-repair period is imperative. This preliminary validation of a reintegration instrument represents a first step toward improving measurement of post-surgical reintegration and has important implications for the evidence base of post-surgical reintegration epidemiology and the development and evaluation of fistula programming.

Analysis of the structural behaviour of colonic segments by inflation tests: Experimental activity and physio-mechanical model.

PubMed

Carniel, Emanuele L; Mencattelli, Margherita; Bonsignori, Gabriella; Fontanella, Chiara G; Frigo, Alessandro; Rubini, Alessandro; Stefanini, Cesare; Natali, Arturo N

2015-11-01

A coupled experimental and computational approach is provided for the identification of the structural behaviour of gastrointestinal regions, accounting for both elastic and visco-elastic properties. The developed procedure is applied to characterize the mechanics of gastrointestinal samples from pig colons. Experimental data about the structural behaviour of colonic segments are provided by inflation tests. Different inflation processes are performed according to progressively increasing top pressure conditions. Each inflation test consists of an air in-flow, according to an almost constant increasing pressure rate, such as 3.5 mmHg/s, up to a prescribed top pressure, which is held constant for about 300 s to allow the development of creep phenomena. Different tests are interspersed by 600 s of rest to allow the recovery of the tissues' mechanical condition. Data from structural tests are post-processed by a physio-mechanical model in order to identify the mechanical parameters that interpret both the non-linear elastic behaviour of the sample, as the instantaneous pressure-stretch trend, and the time-dependent response, as the stretch increase during the creep processes. The parameters are identified by minimizing the discrepancy between experimental and model results. Different sets of parameters are evaluated for different specimens from different pigs. A statistical analysis is performed to evaluate the distribution of the parameters and to assess the reliability of the experimental and computational activities. © IMechE 2015.

Pre- to post-immigration sexual risk behaviour and alcohol use among recent Latino immigrants in Miami.

PubMed

Berger Cardoso, Jodi; Ren, Yi; Swank, Paul; Sanchez, Mariana; De La Rosa, Mario

2016-10-01

Retrospective pre-immigration data on sexual risk and alcohol use behaviours was collected from 527 recent Latino immigrants to the USA, aged 18-34. Two follow-up assessments (12 months apart) reported on post-immigration behaviours. Using a mixed model growth curve analysis, a six-level sexual risk change variable was constructed combining measures of sexual partners and condom use. The mixed model growth curve was also used to examine associations between changes in sexual risk behaviour and changes in alcohol use and for testing interaction effects of gender and documentation status. Results suggest that individuals with high sexual risk behaviour at pre-immigration converge to low/moderate risk post-immigration, and that those who were sexually inactive or had low sexual risk at pre-immigration increased their risk post-immigration. Individuals with moderately higher initial but decreasing sexual risk behaviour showed the steepest decline in alcohol use, but their drinking at Time 3 was still higher than individuals reporting low sexual risk at Time 1. On average, men drank more than women, except women in one of the highest sexual risk categories at Time 1 - who seemed to drink as much, if not more, than men. Undocumented men reported more frequent drinking than documented men. In contrast, undocumented women reported lower alcohol use than documented women.

Neurotransmitter Systems in a Mild Blast Traumatic Brain Injury Model: Catecholamines and Serotonin.

PubMed

Kawa, Lizan; Arborelius, Ulf P; Yoshitake, Takashi; Kehr, Jan; Hökfelt, Tomas; Risling, Mårten; Agoston, Denes

2015-08-15

Exposure to improvised explosive devices can result in a unique form of traumatic brain injury--blast-induced traumatic brain injury (bTBI). At the mild end of the spectrum (mild bTBI [mbTBI]), there are cognitive and mood disturbances. Similar symptoms have been observed in post-traumatic stress disorder caused by exposure to extreme psychological stress without physical injury. A role of the monoaminergic system in mood regulation and stress is well established but its involvement in mbTBI is not well understood. To address this gap, we used a rodent model of mbTBI and detected a decrease in immobility behavior in the forced swim test at 1 d post-exposure, coupled with an increase in climbing behavior, but not after 14 d or later, possibly indicating a transient increase in anxiety-like behavior. Using in situ hybridization, we found elevated messenger ribonucleic acid levels of both tyrosine hydroxylase and tryptophan hydroxylase 2 in the locus coeruleus and the dorsal raphe nucleus, respectively, as early as 2 h post-exposure. High-performance liquid chromatography analysis 1 d post-exposure primarily showed elevated noradrenaline levels in several forebrain regions. Taken together, we report that exposure to mild blast results in transient changes in both anxiety-like behavior and brain region-specific molecular changes, implicating the monoaminergic system in the pathobiology of mbTBI.

Buckling of a Longitudinally Jointed Curved Composite Panel Arc Segment for Next Generation of Composite Heavy Lift Launch Vehicles: Verification Testing Analysis

NASA Technical Reports Server (NTRS)

Farrokh, Babak; Segal, Kenneth N.; Akkerman, Michael; Glenn, Ronald L.; Rodini, Benjamin T.; Fan, Wei-Ming; Kellas, Sortiris; Pineda, Evan J.

2014-01-01

In this work, an all-bonded out-of-autoclave (OoA) curved longitudinal composite joint concept, intended for use in the next generation of composite heavy lift launch vehicles, was evaluated and verified through finite element (FE) analysis, fabrication, testing, and post-test inspection. The joint was used to connect two curved, segmented, honeycomb sandwich panels representative of a Space Launch System (SLS) fairing design. The overall size of the resultant panel was 1.37 m by 0.74 m (54 in by 29 in), of which the joint comprised a 10.2 cm (4 in) wide longitudinal strip at the center. NASTRAN and ABAQUS were used to perform linear and non-linear analyses of the buckling and strength performance of the jointed panel. Geometric non-uniformities (i.e., surface contour imperfections) were measured and incorporated into the FE model and analysis. In addition, a sensitivity study of the specimens end condition showed that bonding face-sheet doublers to the panel's end, coupled with some stress relief features at corner-edges, can significantly reduce the stress concentrations near the load application points. Ultimately, the jointed panel was subjected to a compressive load. Load application was interrupted at the onset of buckling (at 356 kN 80 kips). A post-test non-destructive evaluation (NDE) showed that, as designed, buckling occurred without introducing any damage into the panel or the joint. The jointed panel was further capable of tolerating an impact damage to the same buckling load with no evidence of damage propagation. The OoA cured all-composite joint shows promise as a low mass factory joint for segmented barrels.

The effectiveness of CCDSR learning model to improve skills of creating lesson plan and worksheet science process skill (SPS) for pre-service physics teacher

NASA Astrophysics Data System (ADS)

Limatahu, I.; Sutoyo, S.; Wasis; Prahani, B. K.

2018-03-01

In the previous research, CCDSR (Condition, Construction, Development, Simulation, and Reflection) learning model has been developed to improve science process skills for pre-service physics teacher. This research is aimed to analyze the effectiveness of CCDSR learning model towards the improvement skills of creating lesson plan and worksheet of Science Process Skill (SPS) for pre-service physics teacher in academic year 2016/2017. This research used one group pre-test and post-test design on 12 pre-service physics teacher at Physics Education, University of Khairun. Data collection was conducted through test and observation. Creating lesson plan and worksheet SPS skills of pre-service physics teacher measurement were conducted through Science Process Skill Evaluation Sheet (SPSES). The data analysis technique was done by Wilcoxon t-test and n-gain. The CCDSR learning model consists of 5 phases, including (1) Condition, (2) Construction, (3) Development, (4) Simulation, and (5) Reflection. The results showed that there was a significant increase in creating lesson plan and worksheet SPS skills of pre-service physics teacher at α = 5% and n-gain average of moderate category. Thus, the CCDSR learning model is effective for improving skills of creating lesson plan and worksheet SPS for pre-service physics teacher.

Leisure education reduces stress among older adults.

PubMed

Chang, Liang-Chih

2014-01-01

The objectives of this study were to examine whether a leisure education program could facilitate leisure competence among older adults and whether it could also reduce their stress. A pre-test-post-test randomized experimental design was conducted. Subjects were randomly assigned to either an experimental group (n = 30) or a control group (n = 30). A leisure education program was used to serve as the intervention. A day before this experiment was carried out, pre-test data were collected using leisure competence and stress scales. Thirty minutes after this experiment ended, post-test data were collected using the same scales. These data were analyzed using an analysis of covariance. The results indicated that the average post-test scores of leisure competence in the experimental group were significantly higher than those in the control group and that the average post-test scores of stress in the experimental group were significantly lower than those in the control group. Healthcare practitioners should adopt the provision of leisure education as a priority to facilitate leisure competence and reduce stress among older adults.

Assessing the accuracy of blood RNA profiles to identify patients with post-concussion syndrome: A pilot study in a military patient population.

PubMed

Hardy, Jimmaline J; Mooney, Scott R; Pearson, Andrea N; McGuire, Dawn; Correa, Daniel J; Simon, Roger P; Meller, Robert

2017-01-01

Mild traumatic brain injury (mTBI) is a complex, neurophysiological condition that can have detrimental outcomes. Yet, to date, no objective method of diagnosis exists. Physical damage to the blood-brain-barrier and normal waste clearance via the lymphatic system may enable the detection of biomarkers of mTBI in peripheral circulation. Here we evaluate the accuracy of whole transcriptome analysis of blood to predict the clinical diagnosis of post-concussion syndrome (PCS) in a military cohort. Sixty patients with clinically diagnosed chronic concussion and controls (no history of concussion) were recruited (retrospective study design). Male patients (46) were split into a training set comprised of 20 long-term concussed (> 6 months and symptomatic) and 12 controls (no documented history of concussion). Models were validated in a testing set (control = 9, concussed = 5). RNA_Seq libraries were prepared from whole blood samples for sequencing using a SOLiD5500XL sequencer and aligned to hg19 reference genome. Patterns of differential exon expression were used for diagnostic modeling using support vector machine classification, and then validated in a second patient cohort. The accuracy of RNA profiles to predict the clinical diagnosis of post-concussion syndrome patients from controls was 86% (sensitivity 80%; specificity 89%). In addition, RNA profiles reveal duration of concussion. This pilot study shows the potential utility of whole transcriptome analysis to establish the clinical diagnosis of chronic concussion syndrome.

Using Dispersed Modes During Model Correlation

NASA Technical Reports Server (NTRS)

Stewart, Eric; Hathcock, Megan

2017-01-01

Using model dispersions as a starting point allows us to quickly adjust a model to reflect new test data: a) The analyst does a lot of work before the test to save time post-test. b) Creating 1000s of model dispersions to provide "coarse tuning," then use Attune to provide the "fine tuning." ?Successful model tuning on three structures: a) TAURUS. b) Ares I-X C) Cart (in backup charts). ?Mode weighting factors, matrix norm method, and XOR vs. MAC all play key roles in determining the BME. The BME process will be used on future tests: a) ISPE modal test (ongoing work). b) SLS modal test (mid 2018).

Flexural properties of fiber reinforced root canal posts.

PubMed

Lassila, Lippo V J; Tanner, Johanna; Le Bell, Anna-Maria; Narva, Katja; Vallittu, Pekka K

2004-01-01

Fiber-reinforced composite (FRC) root canal posts have been introduced to be used instead of metal alloys and ceramics. The aim of this study was to investigate the flexural properties of different types of FRC posts and compare those values with a novel FRC material for dental applications. Seventeen different FRC posts of various brands (Snowpost, Carbopost, Parapost, C-post, Glassix, Carbonite) and diameters, (1.0-2.1 mm) and a continuous unidirectional E-glass FRC polymerized by light activation to a cylindrical form (everStick, diameter 1.5 mm) as a control material were tested. The posts (n=5) were stored at room's humidity or thermocycled (12.000 x, 5 degrees C/55 degrees C) and stored in water for 2 weeks before testing. A three-point bending test (span=10 mm) was used to measure the flexural strength and modulus of FRC post specimens. Analysis of ANOVA revealed that thermocycling, brand of material and diameter of specimen had a significant effect (p<0.001) on the fracture load and flexural strength. The highest flexural strength was obtained with the control material (everStick, 1144.9+/-99.9 MPa). There was a linear relationship between fracture load and diameter of posts for both glass fiber and carbon fiber posts. Thermocycling decreased the flexural modulus of the tested specimens by approximately 10%. Strength and fracture load decreased approximately 18% as a result of thermocycling. Considerable variation can be found in the calculated strength values of the studied post brands. Commercial prefabricated FRC posts showed lower flexural properties than an individually polymerised FRC material.

The effectiveness of flipped classroom learning model in secondary physics classroom setting

NASA Astrophysics Data System (ADS)

Prasetyo, B. D.; Suprapto, N.; Pudyastomo, R. N.

2018-03-01

The research aimed to describe the effectiveness of flipped classroom learning model on secondary physics classroom setting during Fall semester of 2017. The research object was Secondary 3 Physics group of Singapore School Kelapa Gading. This research was initiated by giving a pre-test, followed by treatment setting of the flipped classroom learning model. By the end of the learning process, the pupils were given a post-test and questionnaire to figure out pupils' response to the flipped classroom learning model. Based on the data analysis, 89% of pupils had passed the minimum criteria of standardization. The increment level in the students' mark was analysed by normalized n-gain formula, obtaining a normalized n-gain score of 0.4 which fulfil medium category range. Obtains from the questionnaire distributed to the students that 93% of students become more motivated to study physics and 89% of students were very happy to carry on hands-on activity based on the flipped classroom learning model. Those three aspects were used to generate a conclusion that applying flipped classroom learning model in Secondary Physics Classroom setting is effectively applicable.

Value Added Productivity Indicators: A Statistical Comparison of the Pre-Test/Post-Test Model and Gain Model.

ERIC Educational Resources Information Center

Weerasinghe, Dash; Orsak, Timothy; Mendro, Robert

In an age of student accountability, public school systems must find procedures for identifying effective schools, classrooms, and teachers that help students continue to learn academically. As a result, researchers have been modeling schools and classrooms to calculate productivity indicators that will withstand not only statistical review but…

The Effect of Modeling Based Science Education on Critical Thinking

ERIC Educational Resources Information Center

Bati, Kaan; Kaptan, Fitnat

2015-01-01

In this study to what degree the modeling based science education can influence the development of the critical thinking skills of the students was investigated. The research was based on pre-test-post-test quasi-experimental design with control group. The Modeling Based Science Education Program which was prepared with the purpose of exploring…

Assessing the impact of total extracorporeal circulation on hemodynamics in an ovine fetal model.

PubMed

Xiao, Fei; Zhuang, Jian; Zhou, Cheng-Bin; Chen, Ji-Mei; Cen, Jian-Zheng; Xu, Gang; Wen, Shu-Sheng

2017-09-01

The present study aimed to evaluate the impact of total extracorporeal circulation on hemodynamics and placental function in an ovine fetal model. Mid-term ovine fetuses (n=6) underwent extracorporeal circulation (30 min), cardioplegic arrest (20 min) and monitoring (120 min). The ascending aorta and umbilical cords of the fetuses were occluded during the bypass and an extracorporeal membrane oxygenator was used as the oxygen source. Biventricular intracardiac pressures, echocardiographic data, blood gas levels and placental function variables were recorded, and statistical analysis was performed using the repeated-measure analysis of variance test. The data indicated that fetal heart rate and blood pressure at 30, 60, 90 and 120 min following the bypass were stable relative to pre-arrest baseline (pre-bypass) values (P>0.05). However, end diastolic pressures in the ovine right ventricles post-bypass were significantly increased at 30, 60, 90 and 120 min relative to pre-bypass pressures (P<0.05). The pulsatility index also increased at 30 min post-bypass relative to the pre-bypass score (0.91±0.06 vs. 0.61±0.14; P=0.007). The mean resistivity index at all time points post-bypass was consistent with the pre-bypass score (P>0.05), while the mean Tei index values for the left and right ventricles post-bypass were significantly higher at all time points relative to pre-bypass values (P<0.05). The pre-bypass fetal blood pH, SaO 2 , base excess and lactate values were maintained during arrest (P>0.05). Fetal hemodynamics and placental function additionally remained stable for up to 2 h upon reperfusion following total extracorporeal circulation and cardioplegic arrest. Collectively these data suggest that the reproducible ovine fetal model may be useful in the evaluation of fetal cardiac surgery.

Influence of clinical baseline findings on the survival of 2 post systems: a randomized clinical trial.

PubMed

Schmitter, Marc; Rammelsberg, Peter; Gabbert, Olaf; Ohlmann, Brigitte

2007-01-01

The aim of this prospective randomized controlled trial was to evaluate the influence of clinical baseline characteristics on the survival of 2 post systems. One hundred patients needing a post were included. Half the patients received a glass fiber-reinforced post (FRP), and the other half received metal screw posts (MSP). The posts were assigned randomly. In addition to demographic data, the following parameters were recorded: type of tooth (incisor/canine versus molar/premolar), length of the post in relation to root length (percentage), extent of coronal tooth destruction (percentage), ferrule height (in millimeters), type of restoration (fixed or removable partial denture), and presence of antagonistic contacts (yes/no). After at least 1 year (mean: 13.84 months), the patients were recalled. Statistical analysis was performed using the log-rank test and Cox regression analysis. The survival rate of FRPs was 93.5%. In the MSP group, the survival rate was significantly lower (75.6%; log-rank test, P = .049). Additionally, the metal posts were associated with more unfavorable complications, for example, root fracture. The type of the tooth and the degree of coronal tooth destruction influenced the survival of MSPs, whereas no influence of these variables could be seen for FRPs. FRPs are superior to MSPs with respect to short-term clinical performance. Especially for MSPs, clinical survival depends on several variables.

Central Pain Mechanisms and Novel Therapeutic Strategies in a Model of Closed Head Injury

DTIC Science & Technology

2016-10-01

to play an important role in the pathogenesis of chronic post -traumatic headache; however, this role is not well defined. This research investigates...1 week and chronic 4 week endpoints. Quantitative EEG headache behavioral testing , as well as immunohistochemical and molecular studies uncover...underlying inflammatory contributors to post -traumatic headache. An in vitro slice assay was used to test anti-inflammatory and anti-nociceptive

Development of a fresh cadaver model for instruction of ultrasound-guided breast biopsy during the surgery clerkship: pre-test and post-test results among third-year medical students.

PubMed

McCrary, Hilary C; Krate, Jonida; Savilo, Christine E; Tran, Melissa H; Ho, Hang T; Adamas-Rappaport, William J; Viscusi, Rebecca K

2016-11-01

The aim of our study was to determine if a fresh cadaver model is a viable method for teaching ultrasound (US)-guided breast biopsy of palpable breast lesions. Third-year medical students were assessed both preinstruction and postinstruction on their ability to perform US-guided needle aspiration or biopsy of artificially created masses using a 10-item checklist. Forty-one third-year medical students completed the cadaver laboratory as part of the surgery clerkship. Eight items on the checklist were found to be significantly different between pre-testing and post-testing. The mean preinstruction score was 2.4, whereas the mean postinstruction score was 7.10 (P < .001). Fresh cadaver models have been widely used in medical education. However, there are few fresh cadaver models that provide instruction on procedures done in the outpatient setting. Our model was found to be an effective method for the instruction of US-guided breast biopsy among medical students. Copyright © 2016 Elsevier Inc. All rights reserved.

Lagrangian methods for blood damage estimation in cardiovascular devices--How numerical implementation affects the results.

PubMed

Marom, Gil; Bluestein, Danny

2016-01-01

This paper evaluated the influence of various numerical implementation assumptions on predicting blood damage in cardiovascular devices using Lagrangian methods with Eulerian computational fluid dynamics. The implementation assumptions that were tested included various seeding patterns, stochastic walk model, and simplified trajectory calculations with pathlines. Post processing implementation options that were evaluated included single passage and repeated passages stress accumulation and time averaging. This study demonstrated that the implementation assumptions can significantly affect the resulting stress accumulation, i.e., the blood damage model predictions. Careful considerations should be taken in the use of Lagrangian models. Ultimately, the appropriate assumptions should be considered based the physics of the specific case and sensitivity analysis, similar to the ones presented here, should be employed.

Heart health whispering: A randomized, controlled pilot study to promote nursing student perspective-taking on carers' health risk behaviors.

PubMed

Lobchuk, Michelle; Hoplock, Lisa; Halas, Gayle; West, Christina; Dika, Cheryl; Schroeder, Wilma; Ashcroft, Terri; Clouston, Kathleen Chambers; Lemoine, Jocelyne

2018-01-01

Lifestyle counseling is described as a "major breakthrough" in the control of chronic diseases. Counseling can be challenging to nurses due their lack of motivation to counsel, hesitancy to appear non-judgmental, lack of empathy, and lack of time. Nurses voice their need for more training in counseling communication skills. Our main objective was to engage in ongoing development and testing of a promising Heart Health Whispering perspective-taking intervention on nursing students' clinical empathy, perceptual understanding, and client readiness to alter health risk behaviors. In this randomized controlled pilot study, the full intervention (perspective-taking instructions, practice, and video-feedback) and partial intervention (video-feedback only) comprised 24 and 18 nursing students, respectively. Quantitative data were collected with a 10-item pre- and post-intervention clinical empathy tool, a one-item 'readiness to change' health risk behavior tool plus similarity ratings on students' empathic accuracy were calculated. Data were analyzed using Independent Samples t Tests and mixed model ANCOVA models. Students' and actors' evaluative responses toward the intervention phases were collected by handwritten notes, and analyzed using content analysis and constant comparison techniques. The main finding was that students in the full intervention group reported greater clinical empathy in the post versus baseline condition. Students underestimated their clinical empathy in comparison to carers' reports in the post-condition. In both intervention groups, carers reported more readiness to change in the post-condition. Carers identified favorable and unfavorable perceptions and outcomes of approaches taken by students . Students desired immediate and direct feedback after the video-dialogue and -tagging exercise. Heart Health Whispering is a promising intervention to help educators in basic and continuing education to bolster nurse confidence in empathic conversations on health risk behaviors. This intervention incorporates commonly used strategies to teach empathic communication along with a novel video-analysis application of a perspective-taking task. Student and carer actor comments highlighted the value in opportunities for students to engage in self-evaluation and practicing the empathic process of taking the client's perspective on health risk behaviors.

Characterizing the gender gap in introductory physics

NASA Astrophysics Data System (ADS)

Kost, Lauren E.; Pollock, Steven J.; Finkelstein, Noah D.

2009-06-01

Previous research [S. J. Pollock , Phys. Rev. ST Phys. Educ. Res. 3, 1 (2007)] showed that despite the use of interactive engagement techniques, the gap in performance between males and females on a conceptual learning survey persisted from pretest to post-test at the University of Colorado at Boulder. Such findings were counter to previously published work [M. Lorenzo , Am. J. Phys. 74, 118 (2006)]. This study begins by identifying a variety of other gender differences. There is a small but significant difference in the course grades of males and females. Males and females have significantly different prior understandings of physics and mathematics. Females are less likely to take high school physics than males, although they are equally likely to take high school calculus. Males and females also differ in their incoming attitudes and beliefs about physics. This collection of background factors is analyzed to determine the extent to which each factor correlates with performance on a conceptual post-test and with gender. Binned by quintiles, we observe that males and females with similar pretest scores do not have significantly different post-test scores (p>0.2) . The post-test data are then modeled using two regression models (multiple regression and logistic regression) to estimate the gender gap in post-test scores after controlling for these important prior factors. These prior factors account for about 70% of the observed gender gap. The results indicate that the gender gap exists in interactive physics classes at our institution but is largely associated with differences in previous physics and math knowledge and incoming attitudes and beliefs.

Initiation and growth of multiple-site damage in the riveted lap joint of a curved stiffened fuselage panel: An experimental and analytical study

NASA Astrophysics Data System (ADS)

Ahmed, Abubaker Ali

As part of the structural integrity research of the National Aging Aircraft Research Program, a comprehensive study on multiple-site damage (MSD) initiation and growth in a pristine lap-joint fuselage panel has been conducted. The curved stiffened fuselage panel was tested at the Full-Scale Aircraft Structural Test Evaluation and Research (FASTER) facility located at the Federal Aviation Administration William J. Hughes Technical Center. A strain survey test was conducted to verify proper load application. The panel was then subjected to a fatigue test with constant-amplitude cyclic loading. The applied loading spectrum included underload marker cycles so that crack growth history could be reconstructed from post-test fractographic examinations. Crack formation and growth were monitored via nondestructive and high-magnification visual inspections. Strain gage measurements recorded during the strain survey tests indicated that the inner surface of the skin along the upper rivet row of the lap joint experienced high tensile stresses due to local bending. During the fatigue loading, cracks were detected by eddy-current inspections at multiple rivet holes along the upper rivet row. Through-thickness cracks were detected visually after about 80% of the fatigue life. Once MSD cracks from two adjacent rivet holes linked up, there was a quick deterioration in the structural integrity of the lap joint. The linkup resulted in a 2.87" (72.9-mm) lead fatigue crack that rapidly propagated across 12 rivet holes and crossed over into the next skin bay, at which stage the fatigue test was terminated. A post-fatigue residual strength test was then conducted by loading the panel quasi-statically up to final failure. The panel failed catastrophically when the crack extended instantaneously across three additional bays. Post-test fractographic examinations of the fracture surfaces in the lap joint of the fuselage panel were conducted to characterize subsurface crack initiation and growth. Results showed evidence of fretting damage and crack initiation at multiple locations near the rivet holes along the faying surface of the skin. The subsurface cracks grew significantly along the faying surface before reaching the outer surface of the skin, forming elliptical crack fronts. A finite element model (FE) of the panel was constructed and geometrically-nonlinear analyses conducted to determine strain distribution under the applied loads. The FE model was validated by comparing the analysis results with the strain gage measurements recorded during the strain survey test. The validated FE model was then used to determine stress-intensity factors at the crack tips. Stress-intensity factor results indicated that crack growth in the lap joint was under mixed-mode; however, the opening-mode stress intensity factor was dominant. The stress-intensity factors computed from the FE analysis were used to conduct cycle-by-cycle integration of fatigue crack growth. In the cycle-by-cycle integration, the NASGRO crack growth model was used with its parameters selected to account for the effects of plasticity-induced crack closure and the test environment on crack growth rate. Fatigue crack growth predictions from cycle-by-cycle computation were in good agreement with the experimental measured crack growth data. The results of the study provide key insights into the natural development and growth of MSD cracks in the pristine lap joint. The data provided by the study represent a valuable source for the evaluation and validation of analytical methodologies used for predicting MSD crack initiation and growth.

Meeting the demand of the future: a curriculum to stimulate interest in careers in primary care internal medicine

PubMed Central

Hawthorne, Mary R.; Dinh, An

2017-01-01

ABSTRACT Background: There is a growing need for primary care physicians, but only a small percentage of graduating medical students enter careers in primary care. Purpose: To assess whether a Primary Care Intraclerkship within the Medicine clerkship can significantly improve students’ attitudes by analyzing scores on pre- and post-tests. Methods: Students on the Medicine clerkship at the University of Massachusetts Medical School participated in full-day ‘intraclerkships’,to demonstrate the importance of primary care and the management of chronic illness in various primary care settings. Pre-and post-tests containing students’ self-reported, five-point Likert agreement scale evaluations to 26 items (measuring perceptions about the roles of primary care physicians in patient care and treatment) were collected before and after each session. Eleven intraclerkships with 383 students were held between June 2010 and June 2013. Responses were analyzed using the GLM Model Estimate. Results: Results from the survey analysis showed significantly more positive attitudes toward primary care in the post-tests compared to the pre-tests. Students who were satisfied with their primary care physicians were significantly more likely to show an improvement in post-test attitudes toward primary care in the areas of physicians improving the quality of patient care, making a difference in overall patient health, finding primary care as an intellectually challenging field, and in needing to collaborate with specialists. Older students were more likely than younger students to show more favorable answers on questions concerning the relative value of primary care vs. specialty care. Conclusions: A curriculum in Primary Care Internal Medicine can provide a framework to positively influence students’ attitudes toward the importance of primary care, and potentially to influence career decisions to enter careers in Primary Care Internal Medicine. Ensuring that medical students receive excellent primary care for themselves can also positively influence attitudes toward primary care. PMID:28670982

Driving Intervention for Returning Combat Veterans.

PubMed

Classen, Sherrilene; Winter, Sandra; Monahan, Miriam; Yarney, Abraham; Link Lutz, Amanda; Platek, Kyle; Levy, Charles

2017-04-01

Increased crash incidence following deployment and veterans' reports of driving difficulty spurred traffic safety research for this population. We conducted an interim analysis on the efficacy of a simulator-based occupational therapy driving intervention (OT-DI) compared with traffic safety education (TSE) in a randomized controlled trial. During baseline and post-testing, OT-Driver Rehabilitation Specialists and one OT-Certified Driver Rehabilitation Specialist measured driving performance errors on a DriveSafety CDS-250 high-fidelity simulator. The intervention group ( n = 13) received three OT-DI sessions addressing driving errors and visual-search retraining. The control group ( n = 13) received three TSE sessions addressing personal factors and defensive driving. Based on Wilcoxon rank-sum analysis, the OT-DI group's errors were significantly reduced when comparing baseline with Post-Test 1 ( p < .0001) and comparing the OT-DI group with the TSE group at Post-Test 1 ( p = .01). These findings provide support for the efficacy of the OT-DI and set the stage for a future effectiveness study.

A practical guide to environmental association analysis in landscape genomics.

PubMed

Rellstab, Christian; Gugerli, Felix; Eckert, Andrew J; Hancock, Angela M; Holderegger, Rolf

2015-09-01

Landscape genomics is an emerging research field that aims to identify the environmental factors that shape adaptive genetic variation and the gene variants that drive local adaptation. Its development has been facilitated by next-generation sequencing, which allows for screening thousands to millions of single nucleotide polymorphisms in many individuals and populations at reasonable costs. In parallel, data sets describing environmental factors have greatly improved and increasingly become publicly accessible. Accordingly, numerous analytical methods for environmental association studies have been developed. Environmental association analysis identifies genetic variants associated with particular environmental factors and has the potential to uncover adaptive patterns that are not discovered by traditional tests for the detection of outlier loci based on population genetic differentiation. We review methods for conducting environmental association analysis including categorical tests, logistic regressions, matrix correlations, general linear models and mixed effects models. We discuss the advantages and disadvantages of different approaches, provide a list of dedicated software packages and their specific properties, and stress the importance of incorporating neutral genetic structure in the analysis. We also touch on additional important aspects such as sampling design, environmental data preparation, pooled and reduced-representation sequencing, candidate-gene approaches, linearity of allele-environment associations and the combination of environmental association analyses with traditional outlier detection tests. We conclude by summarizing expected future directions in the field, such as the extension of statistical approaches, environmental association analysis for ecological gene annotation, and the need for replication and post hoc validation studies. © 2015 John Wiley & Sons Ltd.

Sediment pore-water toxicity test results and preliminary toxicity identification of post-landfall pore-water samples collected following the Deepwater Horizon oil release, Gulf of Mexico, 2010

USGS Publications Warehouse

Biedenbach, James M.; Carr, Robert S.

2011-01-01

Pore water from coastal beach and marsh sediments from the northern Gulf of Mexico, pre- and post-landfall of the Deepwater Horizon oil release, were collected and evaluated for toxicity with the sea urchin fertilization and embryological development assays. There were 17 pre-landfall samples and 49 post-landfall samples tested using both assays. Toxicity was determined in four pre-landfall sites and in seven post-landfall sites in one or both assays as compared to a known reference sediment pore-water sample collected in Aransas Bay, Texas. Further analysis and testing of five of the post-landfall toxic samples utilizing Toxicity Identification Evaluation techniques indicated that ammonia, and to a lesser extent metals, contributed to most, if not all, of the observed toxicity in four of the five samples. Results of one sample (MS-39) indicated evidence that ammonia, metals, and non-ionic organics were contributing to the observed toxicity.

Differential Canard deflection for generation of yawing moment on the X-31 with and without the vertical tail. M.S. Thesis - George Washington Univ.

NASA Technical Reports Server (NTRS)

Whiting, Matthew Robert

1996-01-01

The feasibility of augmenting the available yaw control power on the X-31 through differential deflection of the canard surfaces was studied as well as the possibility of using differential canard control to stabilize the X-31 with its vertical tail removed. Wind-tunnel tests and the results of departure criteria and linear analysis showed the destabilizing effect of the reduction of the vertical tail on the X-31. Wind-tunnel testing also showed that differential canard deflection was capable of generating yawing moments of roughly the same magnitude as the thrust vectoring vanes currently in place on the X-31 in the post-stall regime. Analysis showed that the X-31 has sufficient aileron roll control power that with the addition of differential canard as a yaw controller, the wind-axis roll accelerations will remain limited by yaw control authority. It was demonstrated, however, that pitch authority may actually limit the maximum roll rate which can be sustained. A drop model flight test demonstrated that coordinated, wind axis rolls could be performed with roll rates as high as 50 deg/sec (full scale equivalent) at 50 deg angle of attack. Another drop model test was conducted to assess the effect of vertical tail reduction, and an analysis of using differential canard deflection to stabilize the tailless X-31 was performed. The results of six-degree-of-freedom, non-linear simulation tests were correlated with the drop model flights. Simulation studies then showed that the tailless X-31 could be controlled at angles of attack at or above 20 deg using differential canard as the only yaw controller.

The water extract of tutsan (Hypericum androsaemum L.) red berries exerts antidepressive-like effects and in vivo antioxidant activity in a mouse model of post-stroke depression.

PubMed

Nabavi, Seyed Mohammad; Nabavi, Seyed Fazel; Sureda, Antoni; Caprioli, Giovanni; Iannarelli, Romilde; Sokeng, Arold Jorel Tsetegho; Braidy, Nady; Khanjani, Sedigheh; Moghaddam, Akbar Hajizadeh; Atanasov, Atanas G; Daglia, Maria; Maggi, Filippo

2018-03-01

Hypericum androsaemum L., commonly known as 'tutsan' or 'shrubby St. John's Wort', is a member of the Hypericum genus found growing spontaneously in the Mediterranean area and is cultivated extensively as an ornamental plant due to the showy color variation in its fresh berry-like capsules, which turn from red to shiny black as they ripen. Tutsan has also been used in Portuguese and Spanish folk medicine to treat depression. In this study, we assessed the beneficial role of the water extract of H. androsaemum red berries (WE) in an experimental animal model of post-stroke depression. WE was obtained by decoction of H. androsaemum red berries, and its content of ten bioactive compounds was determined through HPLC-DAD analysis. Behavioral tests were carried out using a mouse model of post stroke depression to examine the antidepressive-like activity of WE at two doses (15 and 30 mg/kg bw). In addition, the in vivo antioxidant activity in the mouse brain was evaluated by measuring CAT, GSH, and SOD activity and TBARS levels. WE contained significant amounts of shikimic acid (110.0 g/kg), chlorogenic acid (56.9 g/kg), catechin (5.8 g/kg) and hyperoside (2.7 g/kg). Overall, the highest dosage of WE was found to significantly reduce the symptoms of depression, restoring normal behaviour and reducing levels of oxidative stress by increasing endogenous antioxidant defenses. The protective effects of WE in post-stroke depression in a mouse model were demonstrated in vivo for the first time, and correlated with the antioxidant capacity of its bioactive constituents. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Lifetime cost of everolimus vs axitinib in patients with advanced renal cell carcinoma who failed prior sunitinib therapy in the US.

PubMed

Perrin, Allison; Sherman, Steven; Pal, Sumanta; Chua, Andrew; Gorritz, Magdaliz; Liu, Zhimei; Wang, Xufang; Culver, Kenneth; Casciano, Roman; Garrison, Louis P

2015-03-01

Everolimus and axitinib are approved in the US to treat patients with advanced renal cell carcinoma (RCC) after failure on sunitinib or sorafenib, and one prior systemic therapy (e.g., sunitinib), respectively. Two indirect comparisons performed to evaluate progression-free survival in patients treated with everolimus vs axitinib suggested similar efficacy between the two treatments. Therefore, this analysis compares the lifetime costs of these two therapies among sunitinib-refractory advanced RCC patients from a US payer perspective. A Markov model was developed to simulate a cohort of sunitinib-refractory advanced RCC patients and estimate the cost of treating patients with everolimus vs axitinib. The following health states were included: stable disease without adverse events (AEs), stable disease with AEs, disease progression (PD), and death. The model included the following resources: active treatments, post-progression treatments, adverse events, physician and nurse visits, scans and tests, and palliative care. Resource utilization inputs were derived from a US claims database analysis. Additionally, a 3% annual discount rate was applied to costs, and the robustness of the model results was tested by conducting sensitivity analyses, including those on dosing scheme and post-progression treatment costs. Base case results demonstrated that patients treated with everolimus cost an average of $12,985 (11%) less over their lifetimes than patients treated with axitinib. The primary difference in costs was related to active treatment, which was largely driven by axitinib's higher dose intensity. RESULTS remained consistent across sensitivity analyses for AE and PD treatment costs, as well as dose intensity and discount rates. The results suggest that everolimus likely leads to lower lifetime costs than axitinib for sunitinib-refractory advanced RCC patients in the US.

The impact of resident involvement on post-operative morbidity and mortality following orthopaedic procedures: a study of 43,343 cases.

PubMed

Schoenfeld, Andrew J; Serrano, Jose A; Waterman, Brian R; Bader, Julia O; Belmont, Philip J

2013-11-01

Few studies have addressed the role of residents' participation in morbidity and mortality after orthopaedic surgery. The present study utilized the 2005-2010 National Surgical Quality Improvement Program (NSQIP) dataset to assess the risk of 30-day post-operative complications and mortality associated with resident participation in orthopaedic procedures. The NSQIP dataset was queried using codes for 12 common orthopaedic procedures. Patients identified as having received one of the procedures had their records abstracted to obtain demographic data, medical history, operative time, and resident involvement in their surgical care. Thirty-day post-operative outcomes, including complications and mortality, were assessed for all patients. A step-wise multivariate logistic regression model was constructed to evaluate the impact of resident participation on mortality- and complication-risk while controlling for other factors in the model. Primary analyses were performed comparing cases where the attending surgeon operated alone to all other case designations, while a subsequent sensitivity analysis limited inclusion to cases where resident participation was reported by post-graduate year. In the NSQIP dataset, 43,343 patients had received one of the 12 orthopaedic procedures queried. Thirty-five percent of cases were performed with resident participation. The mortality rate, overall, was 2.5 and 10 % sustained one or more complications. Multivariate analysis demonstrated a significant association between resident participation and the risk of one or more complications [OR 1.3 (95 % CI 1.1, 1.4); p < 0.001] as well as major systemic complications [OR 1.6 (95 % CI 1.3, 2.0); p < 0.001] for primary joint arthroplasty procedures only. These findings persisted even after sensitivity testing. A mild to moderate risk for complications was noted following resident involvement in joint arthroplasty procedures. No significant risk of post-operative morbidity or mortality was appreciated for the other orthopaedic procedures studied. II (Prognostic).

A study of the effectiveness of ergonomically-based functional screening tests and their relationship to reducing worker compensation injuries.

PubMed

Anderson, Charles; Briggs, Jim

2008-01-01

This paper summarizes a series of studies of the effectiveness of ergonomically based functional screening tests for post offer pre-placement of applicants for physically demanding jobs, and their relationship to reducing worker compensation injuries. Three predictive validation studies and a meta-analysis of injury rates pre- and post-implementation of physical ability testing at 175 locations are included. The strength and energy expenditure demands of physically-strenuous warehouse jobs in three industries were documented through ergonomic analysis. A battery of strength and endurance tests were developed to assess applicants' abilities to meet the measured physical demands. Predictive validation studies were performed for the jobs in each of the three industries. In each study, new-hires were given the physical ability test battery and then placed on the job. Management was not informed of the results of the tests. Injury experience and work history were then monitored over a two year period in each study. Injury rates and retention were then compared for individuals who passed and individuals who failed the battery. As the battery was implemented in other locations, the injury rate for individuals starting employment in the year prior to implementation was compared to the injury rate for individuals starting employment in the year after implementation. A meta-analysis of the three predictive validation studies indicated that new-hires who passed the battery had a 47% lower worker compensation injury rate and 21% higher retention. A meta-analysis of the 175 pre/post-implementation studies indicated a 41% reduction in worker compensation injuries associated with implementation of ergonomically based physical ability tests.

Effect of a brief cognitive behavioural intervention on criminal thinking and prison misconduct in male inmates: Variable-oriented and person-oriented analyses.

PubMed

Walters, Glenn D

2017-12-01

There is some consensus on the value of cognitive-behaviourally informed interventions in the criminal justice system, but uncertainty about which components are of critical value. To test the hypothesis that change in prisoners - criminal thinking and institutional misconduct - will both follow completion of a brief cognitive behavioural intervention. A one-group pre-test-post-test quasi-experimental design was used to assess change on the General Criminal Thinking (GCT) scale of the Psychological Inventory of Criminal Thinking Styles among 219 male prisoners completing a 10-week cognitive behavioural intervention, referred to as 'Lifestyle Issues'. Institutional misconduct was measured for 1 year prior to completion of the course and 2 years subsequently. Using variable-oriented analysis, post-test GCT scores were compared with change in prison conduct, controlling for the pre-test thinking scores. Calculations were repeated by using person-oriented analysis. Prisoners who displayed a drop in GCT scores between pre-test and post-test levels were significantly more likely to show a reduction in prison misconduct, whereas prison misconduct was likely to escalate among those who displayed a rise in criminal thinking scores from pre-test to post-test. These findings must still be regarded as preliminary, but taken together with other work and with cognitive behavioural theory, they suggest that development of more prosocial thinking and abilities may have an early beneficial effect on institutional behaviour. Their measurement may offer a practical way in which men could be assessed for readiness to return to the community. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Post-test probability for neonatal hyperbilirubinemia based on umbilical cord blood bilirubin, direct antiglobulin test, and ABO compatibility results.

PubMed

Peeters, Bart; Geerts, Inge; Van Mullem, Mia; Micalessi, Isabel; Saegeman, Veroniek; Moerman, Jan

2016-05-01

Many hospitals opt for early postnatal discharge of newborns with a potential risk of readmission for neonatal hyperbilirubinemia. Assays/algorithms with the possibility to improve prediction of significant neonatal hyperbilirubinemia are needed to optimize screening protocols and safe discharge of neonates. This study investigated the predictive value of umbilical cord blood (UCB) testing for significant hyperbilirubinemia. Neonatal UCB bilirubin, UCB direct antiglobulin test (DAT), and blood group were determined, as well as the maternal blood group and the red blood cell antibody status. Moreover, in newborns with clinically apparent jaundice after visual assessment, plasma total bilirubin (TB) was measured. Clinical factors positively associated with UCB bilirubin were ABO incompatibility, positive DAT, presence of maternal red cell antibodies, alarming visual assessment and significant hyperbilirubinemia in the first 6 days of life. UCB bilirubin performed clinically well with an area under the receiver-operating characteristic curve (AUC) of 0.82 (95 % CI 0.80-0.84). The combined UCB bilirubin, DAT, and blood group analysis outperformed results of these parameters considered separately to detect significant hyperbilirubinemia and correlated exponentially with hyperbilirubinemia post-test probability. Post-test probabilities for neonatal hyperbilirubinemia can be calculated using exponential functions defined by UCB bilirubin, DAT, and ABO compatibility results. • The diagnostic value of the triad umbilical cord blood bilirubin measurement, direct antiglobulin testing and blood group analysis for neonatal hyperbilirubinemia remains unclear in literature. • Currently no guideline recommends screening for hyperbilirubinemia using umbilical cord blood. What is New: • Post-test probability for hyperbilirubinemia correlated exponentially with umbilical cord blood bilirubin in different risk groups defined by direct antiglobulin test and ABO blood group compatibility results. • Exponential functions can be used to calculate hyperbilirubinemia probability.

Using PlayDoh Astronomy for Understanding the Size and Scale of the Earth-Moon System and as a Probe for Spatial Translation Ability

NASA Astrophysics Data System (ADS)

Grundstrom, Erika

2013-01-01

To help students love science more and to help them understand the vast distances that pervade astronomy, we use kinesthetic modeling of the Earth-Moon system using PlayDoh. When coupled with discussion, we found (in a pilot study) that students of all ages (children up through adults) acquired a more accurate mental representation of the Earth-Moon system. During early September 2012, we devised and implemented a curriculum unit that focused on the Earth-Moon system and how that relates to eclipses for six middle-Tennessee 6th grade public school classrooms. For this unit, we used PlayDoh as the kinesthetic modeling tool. First, we evaluated what the students knew about the size and scale prior to this intervention using paper and model pre-tests. Second, we used the PlayDoh to model the Earth-Moon system and when possible, conducted an immediate post-test. The students then engaged with the PlayDoh model to help them understand eclipses. Third, we conducted a one-month-later delayed post-test. One thing to note is that about half of the students had experienced the PlayDoh modeling part of a 5th grade pilot lesson during May 2012 therefore the pre-test acted as a four-month-later delayed post-test for these students. We find, among other things, that students retain relative size information more readily than relative distance information. We also find differences in how consistent students are when trying to translate the size/scale they have in their heads to the different modes of assessment utilized.

Determining post-test risk in a national sample of stress nuclear myocardial perfusion imaging reports: Implications for natural language processing tools.

PubMed

Levy, Andrew E; Shah, Nishant R; Matheny, Michael E; Reeves, Ruth M; Gobbel, Glenn T; Bradley, Steven M

2018-04-25

Reporting standards promote clarity and consistency of stress myocardial perfusion imaging (MPI) reports, but do not require an assessment of post-test risk. Natural Language Processing (NLP) tools could potentially help estimate this risk, yet it is unknown whether reports contain adequate descriptive data to use NLP. Among VA patients who underwent stress MPI and coronary angiography between January 1, 2009 and December 31, 2011, 99 stress test reports were randomly selected for analysis. Two reviewers independently categorized each report for the presence of critical data elements essential to describing post-test ischemic risk. Few stress MPI reports provided a formal assessment of post-test risk within the impression section (3%) or the entire document (4%). In most cases, risk was determinable by combining critical data elements (74% impression, 98% whole). If ischemic risk was not determinable (25% impression, 2% whole), inadequate description of systolic function (9% impression, 1% whole) and inadequate description of ischemia (5% impression, 1% whole) were most commonly implicated. Post-test ischemic risk was determinable but rarely reported in this sample of stress MPI reports. This supports the potential use of NLP to help clarify risk. Further study of NLP in this context is needed.

An in vitro test bench reproducing coronary blood flow signals.

PubMed

Chodzyński, Kamil Jerzy; Boudjeltia, Karim Zouaoui; Lalmand, Jacques; Aminian, Adel; Vanhamme, Luc; de Sousa, Daniel Ribeiro; Gremmo, Simone; Bricteux, Laurent; Renotte, Christine; Courbebaisse, Guy; Coussement, Grégory

2015-08-07

It is a known fact that blood flow pattern and more specifically the pulsatile time variation of shear stress on the vascular wall play a key role in atherogenesis. The paper presents the conception, the building and the control of a new in vitro test bench that mimics the pulsatile flows behavior based on in vivo measurements. An in vitro cardiovascular simulator is alimented with in vivo constraints upstream and provided with further post-processing analysis downstream in order to mimic the pulsatile in vivo blood flow quantities. This real-time controlled system is designed to perform real pulsatile in vivo blood flow signals to study endothelial cells' behavior under near physiological environment. The system is based on an internal model controller and a proportional-integral controller that controls a linear motor with customized piston pump, two proportional-integral controllers that control the mean flow rate and temperature of the medium. This configuration enables to mimic any resulting blood flow rate patterns between 40 and 700 ml/min. In order to feed the system with reliable periodic flow quantities in vivo measurements were performed. Data from five patients (1 female, 4 males; ages 44-63) were filtered and post-processed using the Newtonian Womersley's solution. These resulting flow signals were compared with 2D axisymmetric, numerical simulation using a Carreau non-Newtonian model to validate the approximation of a Newtonian behavior. This in vitro test bench reproduces the measured flow rate time evolution and the complexity of in vivo hemodynamic signals within the accuracy of the relative error below 5%. This post-processing method is compatible with any real complex in vivo signal and demonstrates the heterogeneity of pulsatile patterns in coronary arteries among of different patients. The comparison between analytical and numerical solution demonstrate the fair quality of the Newtonian Womersley's approximation. Therefore, Womersley's solution was used to calculate input flow rate for the in vitro test bench.

Battery testing at Argonne National Laboratory

NASA Astrophysics Data System (ADS)

Deluca, W. H.; Gillie, K. R.; Kulaga, J. E.; Smaga, J. A.; Tummillo, A. F.; Webster, C. E.

1993-03-01

Argonne National Laboratory's Analysis & Diagnostic Laboratory (ADL) tests advanced batteries under simulated electric and hybrid vehicle operating conditions. The ADL facilities also include a post-test analysis laboratory to determine, in a protected atmosphere if needed, component compositional changes and failure mechanisms. The ADL provides a common basis for battery performance characterization and life evaluations with unbiased application of tests and analyses. The battery evaluations and post-test examinations help identify factors that limit system performance and life and the most-promising R&D approaches for overcoming these limitations. Since 1991, performance characterizations and/or life evaluations have been conducted on eight battery technologies: Na/S, Li/S, Zn/Br, Ni/MH, Ni/Zn, Ni/Cd, Ni/Fe, and lead-acid. These evaluations were performed for the Department of Energy's. Office of Transportation Technologies, Electric and Hybrid Propulsion Division (DOE/OTT/EHP), and Electric Power Research Institute (EPRI) Transportation Program. The results obtained are discussed.