Postscript: SD-Squared Revisited Again

ERIC Educational Resources Information Center

Woollams, Anna M.; Lambon Ralph, Matthew A.; Plaut, David C.; Patterson, Karalyn

2010-01-01

The current authors reply to a postscript by Coltheart, Tree, and Saunders which was in response to the current authors response on a comment by the current authors on the original article. The current authors begin by responding to the final challenge posed by Coltheart, Tree, and Saunders (2010). They believe that both experimental and…

Postscript: Winnowing out Some Take-Home Points

ERIC Educational Resources Information Center

Botvinick, Matthew M.; Plaut, David C.

2009-01-01

Presents a postscript to the current authors' response to the comments by J. S. Bowers, M. F. Damian, and C. J. Davis on the current authors' original article, "Short-term memory for serial order: A recurrent neural network model,". Here, Botvinick and Plaut address Bowers et al's assertions that neurophysiological studies that have reported…

ARSRP Signal Processing Software

DTIC Science & Technology

1993-02-01

Hardcopy of plot? Y or N : Y Enter name of postscript output file. : wave2 .ps Postscript file created. Another plot? Y or N :N 19 The two plots...created and stored in wavel.ps and wave2 .ps are shown in Figures 4 and 5 with the corresponding MSS real- time plots from the ARSRP Monitoring Support

Semi automatic indexing of PostScript files using Medical Text Indexer in medical education.

PubMed

Mollah, Shamim Ara; Cimino, Christopher

2007-10-11

At Albert Einstein College of Medicine a large part of online lecture materials contain PostScript files. As the collection grows it becomes essential to create a digital library to have easy access to relevant sections of the lecture material that is full-text indexed; to create this index it is necessary to extract all the text from the document files that constitute the originals of the lectures. In this study we present a semi automatic indexing method using robust technique for extracting text from PostScript files and National Library of Medicine's Medical Text Indexer (MTI) program for indexing the text. This model can be applied to other medical schools for indexing purposes.

Simple Solutions for Space Station Audio Problems

NASA Technical Reports Server (NTRS)

Wood, Eric

2016-01-01

Throughout this summer, a number of different projects were supported relating to various NASA programs, including the International Space Station (ISS) and Orion. The primary project that was worked on was designing and testing an acoustic diverter which could be used on the ISS to increase sound pressure levels in Node 1, a module that does not have any Audio Terminal Units (ATUs) inside it. This acoustic diverter is not intended to be a permanent solution to providing audio to Node 1; it is simply intended to improve conditions while more permanent solutions are under development. One of the most exciting aspects of this project is that the acoustic diverter is designed to be 3D printed on the ISS, using the 3D printer that was set up earlier this year. Because of this, no new hardware needs to be sent up to the station, and no extensive hardware testing needs to be performed on the ground before sending it to the station. Instead, the 3D part file can simply be uploaded to the station's 3D printer, where the diverter will be made.

Teletype Tester

NASA Technical Reports Server (NTRS)

1979-01-01

In the United States, more than 12,000 homes of deaf people are equipped with a system that enables the deaf to communicate by telephone. It consists of a teletype machine hooked up to an "acoustic coupler." The deaf person taps out a message on the teletype keyboard and the acoustic coupler converts teletype pulses into audio signals that can be sent over phone lines. At the other end, another coupler reconverts the signals to activate the teletype's printer and provide a readable message. Though a boon to the deaf, the system presents a problem when something goes wrong. It is difficult to pinpoint the trouble because of the multiple units involved-the teletype's keyboard or its printer, the coupler's sending circuit or its receiving circuit. Finding the trouble is time-consuming and it usually involves removing the equipment from service, leaving the deaf person temporarily without communication. Seeking an answer to this difficulty, NASA's Biomedical Applications Team at Research Triangle Institute, North Carolina, circulated a problem statement to NASA field centers. Langley Research Center responded by developing a compactly-packaged portable Teletype Test Unit.

Postscript: Still in Search of a Good Theory of Reasoning--Rejoinder to Barrouillet, Gauffroy, and Lecas (2008)

ERIC Educational Resources Information Center

Oberauer, Klaus; Oaksford, Mike

2008-01-01

In Barrouillet, Gauffroy, and Lecas's postscript to the current authors' original comment on Barrouillet, Gauffroy, and Lecas's original article, they made four clearly argued points. First, they argued that they had provided a clear rationale for truth value gaps. This misses the point of what a computational-level explanation means. Such an…

Quantitative weight of evidence assessment of risk to honeybee colonies from use of imidacloprid, clothianidin, and thiamethoxam as seed treatments: a postscript.

PubMed

Solomon, Keith R; Stephenson, Gladys L

2017-01-01

This paper is a postscript to the four companion papers in this issue of the Journal (Solomon and Stephenson 2017a , 2017b ; Stephenson and Solomon 2017a , 2017b ). The first paper in the series described the conceptual model and the methods of the QWoE process. The other three papers described the application of the QWoE process to studies on imidacloprid (IMI), clothianidin (CTD), and thiamethoxam (TMX). This postscript was written to summarize the utility of the methods used in the quantitative weight of evidence (QWoE), the overall relevance of the results, and the environmental implications of the findings. Hopefully, this will be helpful to others who wish to conduct QWoEs and use these methods in assessment of risks.

Digital geologic map of the Butler Peak 7.5' quadrangle, San Bernardino County, California

USGS Publications Warehouse

Miller, Fred K.; Matti, Jonathan C.; Brown, Howard J.; digital preparation by Cossette, P. M.

2000-01-01

Open-File Report 00-145, is a digital geologic map database of the Butler Peak 7.5' quadrangle that includes (1) ARC/INFO (Environmental Systems Research Institute) version 7.2.1 Patch 1 coverages, and associated tables, (2) a Portable Document Format (.pdf) file of the Description of Map Units, Correlation of Map Units chart, and an explanation of symbols used on the map, btlrpk_dcmu.pdf, (3) a Portable Document Format file of this Readme, btlrpk_rme.pdf (the Readme is also included as an ascii file in the data package), and (4) a PostScript plot file of the map, Correlation of Map Units, and Description of Map Units on a single sheet, btlrpk.ps. No paper map is included in the Open-File report, but the PostScript plot file (number 4 above) can be used to produce one. The PostScript plot file generates a map, peripheral text, and diagrams in the editorial format of USGS Geologic Investigation Series (I-series) maps.

SEGY to ASCII Conversion and Plotting Program 2.0

USGS Publications Warehouse

Goldman, Mark R.

2005-01-01

INTRODUCTION SEGY has long been a standard format for storing seismic data and header information. Almost every seismic processing package can read and write seismic data in SEGY format. In the data processing world, however, ASCII format is the 'universal' standard format. Very few general-purpose plotting or computation programs will accept data in SEGY format. The software presented in this report, referred to as SEGY to ASCII (SAC), converts seismic data written in SEGY format (Barry et al., 1975) to an ASCII data file, and then creates a postscript file of the seismic data using a general plotting package (GMT, Wessel and Smith, 1995). The resulting postscript file may be plotted by any standard postscript plotting program. There are two versions of SAC: one version for plotting a SEGY file that contains a single gather, such as a stacked CDP or migrated section, and a second version for plotting multiple gathers from a SEGY file containing more than one gather, such as a collection of shot gathers. Note that if a SEGY file has multiple gathers, then each gather must have the same number of traces per gather, and each trace must have the same sample interval and number of samples per trace. SAC will read several common standards of SEGY data, including SEGY files with sample values written in either IBM or IEEE floating-point format. In addition, utility programs are present to convert non-standard Seismic Unix (.sux) SEGY files and PASSCAL (.rsy) SEGY files to standard SEGY files. SAC allows complete user control over all plotting parameters including label size and font, tick mark intervals, trace scaling, and the inclusion of a title and descriptive text. SAC shell scripts create a postscript image of the seismic data in vector rather than bitmap format, using GMT's pswiggle command. Although this can produce a very large postscript file, the image quality is generally superior to that of a bitmap image, and commercial programs such as Adobe Illustrator? can manipulate the image more efficiently.

Parallel text rendering by a PostScript interpreter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kritskii, S.P.; Zastavnoi, B.A.

1994-11-01

The most radical method of increasing the performance of devices controlled by PostScript interpreters may be the use of multiprocessor controllers. This paper presents a method for parallelizing the operation of a PostScript interpreter for rendering text. The proposed method is based on decomposition of the outlines of letters into horizontal strips covering equal areas. The subroutines thus obtained are distributed to the processors in a network and then filled in by conventional sequential algorithms. A special algorithm has been developed for dividing the outlines of characters into subroutines so that each may be colored independently of the others. Themore » algorithm uses special estimates for estimating the correct partition so that the corresponding outlines are divided into horizontal strips. A method is presented for finding such estimates. Two different processing approaches are presented. In the first, one of the processors performs the decomposition of the outlines and distributes the strips to the remaining processors, which are responsible for the rendering. In the second approach, the decomposition process is itself distributed among the processors in the network.« less

Three-Dimensional (3D) Additive Construction: Printing with Regolith

NASA Technical Reports Server (NTRS)

Tsoras, Alexandra

2013-01-01

Three dimensional (3D) printing is a new and booming topic in many realms of research and engineering technology. When it comes to space science and aerospace engineering, it can be useful in numerous ways. As humans travel deeper into space and farther from Earth, sending large quantities of needed supplies from Earth for a mission becomes astronomically expensive and less plausible. In order to reach further to new places, In Situ Resource Utilization (ISRU), a project that pushes for technologies to use materials already present in the destination's environment, is necessary. By using materials already available in space such as regolith from the Moon, Mars, or an asteroid's surface, fewer materials need to be brought into space on a launched vehicle. This allows a vehicle to be filled with more necessary supplies for a deep space mission that may not be found in space, like food and fuel. This project's main objective was to develop a 3D printer that uses regolith to "print" large structures, such as a dome, to be used as a heat shield upon a vehicle's reentry into the atmosphere or even a habitat. 3D printing is a growing technology that uses many different methods to mix, heat, and mold a material into a specific shape. In order to heat the regolith enough to stick together into a solid shape, it must be sintered at each layer of material that is laid. Sintering is a process that heats and compresses a powdered material until it fuses into a solid, which requires a lot of energy input. As an alternative, a polymer can be mixed with the regolith before or as it is sent to the 3D printer head to be placed in the specific shape. The addition of the polymer, which melts and binds at much lower temperatures than sintering temperatures, greatly decreases the required heating temperature and energy input. The main task of the project was to identify a functional material for the printer. The first step was to find a miscible. polymer/solvent solution. This solution was added to the regolith and the solvent was evaporated essentially leaving polymer-coated regolith particles. This material would be sent through the printer head and heated layer by layer to melt the polymer and bind the regolith. This method was one of many in a large goal to utilize materials in space with a custom-made 3D printer that builds dome-shaped habitats and other essential equipment for future deep space missions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Errion, S.M.; Thommes, M.M. Caruthers, C.M.

Using the Apple LaserWriter at ANL (ANL/TM 452) explains how Argonne computer users (with CMS, MVS, or VAX/VMS accounts) can print quality text and graphics on the Apple LaserWriter. Currently, applications at Argonne that are compatible with the Apple LaserWriter include Waterloo Script, CA/ISSCO graphics software (i.e., Cuechart, Tellagraf, and Disspla), SAS/Graph, ANSYS (version 4.2), and some personal computer test and graphics software. This manual does not attempt to cover use of the Apple LaserWriter with other applications, though some information on the handling of PostScript-compatible files may be valid for other applications. Refer to the documentation of those applicationsmore » to learn how they work with the Apple LaserWriter. Most of the information in this manual applies to the Allied Linotype L300P typesetter in Building 222. However, the typesetter is not a high volume output device and should be used primarily for high quality (1250 and 2500 dots per inch) final copy output for Laboratory publications prior to making printing plates. You should print all drafts and proof pages on LaserWriers or other printers compatible with the PostScript page description language. Consult with Graphic Arts (at extension 2-5603) to determine the availability of the typesetter for printing the final copy of your document or graphics application. Since the Apple LaserWriter itself produces good quality output (300 dots per inch), we expect that most internal documents consisting of test or graphics will continue to be printed at LaserWriters distributed throughout the Laboratory. 5 figs., 2 tabs.« less

Particles and forces. At the heart of matter. Readings from Scientific American magazine.

NASA Astrophysics Data System (ADS)

Carrigan, R. A., Jr.; Trower, W. P.

In this volume a selection of Scientific American articles chronicles the most recent developments in particle physics. In these twelve articles, distinguished physicists look at the tools, ideas, and experiments that shed light on events at the early moments of the universe, as well as the increasingly sophisticated instruments that will make further developments possible in the years to come. For the companion volume Particle physics in the cosmos see 49.003.059. Contents: Introduction. I. Ideas. 1. Elementary particles and forces (C. Quigg). 2. Quarks with color and flavor (S. L. Glashow). 3. The lattice theory of quark confinement (C. Rebbi). Postscript to Ideas (C. Quigg). II. Tools. 4. The next generation of particle accelerators (R. R. Wilson). 5. The Superconducting Super Collider (J. D. Jackson, M. Tigner, S. Wojcicki). Postscript to Tools (R. A. Carrigan Jr.). III. Weak interactions. 6. Heavy leptons (M. L. Perl, W. T. Kirk). 7. The search for intermediate vector bosons (D. B. Cline, C. Rubbia, S. van der Meer). IV. Strong interactions. 8. The Upsilon particle (L. M. Lederman). 9. Quarkonium (E. D. Bloom, G. J. Feldman). 10. Particles with naked beauty (N. B. Mistry, R. A. Poling, E. H. Thorndike). V. Now and beyond. 11. Superstrings (M. B. Green). 12. The structure of quarks and leptons (H. Harari). Postscript to Now and beyond (R. A. Carrigan Jr., W. P. Trower).

A Survey of Electronic Color Printer Technologies

NASA Astrophysics Data System (ADS)

Starkweather, Gary K.

1989-08-01

Electronic printing in black and white has now come of age. Both high and low speed laser printers now heavily populate the electronic printing marketplace. On the high end of the market, the Xerox 9700 printer is the market dominator while the Canon LBP-SX and CX engines dominate the low end of the market. Clearly, laser printers are the predominant monochrome electronic printing technology. Ink jet is now beginning to engage the low end printer market but still fails to attain laser printer image quality. As yet, ink jet is not a serious contender for the substantial low end laser printer marketplace served by Apple Computer's LaserWriter II and Hewlett-Packard's LaserJet printers. Laser printing generally dominates because of its cost/performance as well as the reliability of the cartridge serviced low end printers.

75 FR 78977 - Procurement List Proposed Addition and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... products and service are proposed for deletion from the Procurement List: Products Inkjet Printer Cartridge NSN: 7510-01-555-8067--Inkjet printer cartridge NSN: 7510-01-555-7723--Inkjet printer cartridge NSN: 7510-01-555-7721--Inkjet printer cartridge NSN: 7510-01-555-7720--Inkjet printer cartridge NSN: 7510-01...

75 FR 78976 - Procurement List Proposed Addition and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... following products and service are proposed for deletion from the Procurement List: Products Inkjet Printer Cartridge NSN: 7510-01-555-8067--Inkjet printer cartridge NSN: 7510-01-555-7723--Inkjet printer cartridge NSN: 7510-01-555-7721--Inkjet printer cartridge NSN: 7510-01-555-7720--Inkjet printer cartridge NSN...

Windows Program For Driving The TDU-850 Printer

NASA Technical Reports Server (NTRS)

Parrish, Brett T.

1995-01-01

Program provides WYSIWYG compatibility between video display and printout. PDW is Microsoft Windows printer-driver computer program for use with Raytheon TDU-850 printer. Provides previously unavailable linkage between printer and IBM PC-compatible computers running Microsoft Windows. Enhances capabilities of Raytheon TDU-850 hardcopier by emulating all textual and graphical features normally supported by laser/ink-jet printers and makes printer compatible with any Microsoft Windows application. Also provides capabilities not found in laser/ink-jet printer drivers by providing certain Windows applications with ability to render high quality, true gray-scale photographic hardcopy on TDU-850. Written in C language.

76 FR 9555 - Procurement List; Additions and Deletions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

...-6167--Inkjet printer cartridge. NSN: 7510-01-555-6168--Inkjet printer cartridge. NSN: 7510-01-555-6169--Inkjet printer cartridge. NSN: 7510-01-555-6170--compatible with Epson Part No. T018201. Tri- color. NSN: 7510-01-555-6171--Inkjet printer cartridge. NSN: 7510-01-555-6173--Inkjet printer cartridge. NSN: 7510...

Shaw on Hamlet

ERIC Educational Resources Information Center

Dukore, Bernard F.

1971-01-01

Shaw's preoccupation with Hamlet resonates in his creative writing. Article documents this statement not only by examining his novels and plays but by searching through prefaces, postscripts, reviews, letters, speeches, etc. that span Shaw's lifetime. (Author/RB)

Hooked on You.

ERIC Educational Resources Information Center

Sevier, Robert

1988-01-01

Most successful yield strategies use a series of messages specifically designed to meet the informational and emotional needs of students in the final decision-making stages. Techniques to try include: brochures, videotapes, handwritten postscripts, posters, and phone campaigns. (MLW)

EPA Region 8, Memo on Desktop Printer Ink Cartridges Policy & Voluntary Printer Turn-in

EPA Pesticide Factsheets

This memo requests EPA Region 8 users to voluntarily turn-in their desktop printers and notifies users of the Region 8 policy to not provide maintenance or ink and toner cartridges for desktop printers.

Inter-printer color calibration using constrained printer gamut

NASA Astrophysics Data System (ADS)

Zeng, Huanzhao; Humet, Jacint

2005-01-01

Due to the drop size variation of the print heads in inkjet printers, consistent color reproduction becomes challenge for high quality color printing. To improve the color consistency, we developed a method and system to characterize a pair of printers using a colorimeter or a color scanner. Different from prior known approaches that simply try to match colors of one printer to the other without considering the gamut differences, we first constructed an overlapped gamut in which colors can be produced by both printers, and then characterized both printers using a pair of 3-D or 4-D lookup tables (LUT) to produce same colors limited to the overlapped gamut. Each LUT converts nominal device color values into engine-dependent device color values limited to the overlapped gamut. Compared to traditional approaches, the color calibration accuracy is significantly improved. This method can be simply extended to calibrate more than two engines. In a color imaging system that includes a scanner and more than one print engine, this method improves the color consistency very effectively without increasing hardware costs. A few examples for applying this method are: 1) one-pass bi-directional inkjet printing; 2) a printer with two or more sets of pens for printing; and 3) a system embedded with a pair of printers (the number of printers could be easily incremented).

Approaches to 3D printing teeth from X-ray microtomography.

PubMed

Cresswell-Boyes, A J; Barber, A H; Mills, D; Tatla, A; Davis, G R

2018-06-28

Artificial teeth have several advantages in preclinical training. The aim of this study is to three-dimensionally (3D) print accurate artificial teeth using scans from X-ray microtomography (XMT). Extracted and artificial teeth were imaged at 90 kV and 40 kV, respectively, to create detailed high contrast scans. The dataset was visualised to produce internal and external meshes subsequently exported to 3D modelling software for modification before finally sending to a slicing program for printing. After appropriate parameter setting, the printer deposited material in specific locations layer by layer, to create a 3D physical model. Scans were manipulated to ensure a clean model was imported into the slicing software, where layer height replicated the high spatial resolution that was observed in the XMT scans. The model was then printed in two different materials (polylactic acid and thermoplastic elastomer). A multimaterial print was created to show the different physical characteristics between enamel and dentine. © 2018 The Authors Journal of Microscopy © 2018 Royal Microscopical Society.

The Battle of the Printers.

ERIC Educational Resources Information Center

Muller, Douglas; Pettibone, Timothy

This paper compares the characteristics of dot-matrix and daisy wheel printers using a two-column format. In the first section, the left column is used to point out the advantages of dot-matrix printers, while the daisy wheel printer is praised in the right-hand column. Examples of various capabilities are included. Advantages of the dot-matrix…

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer

PubMed Central

Stefaniak, Aleksandr B.; LeBouf, Ryan F.; Yi, Jinghai; Ham, Jason; Nurkewicz, Timothy; Schwegler-Berry, Diane E.; Chen, Bean T.; Wells, J. Raymond; Duling, Matthew G.; Lawrence, Robert B.; Martin, Stephen B.; Johnson, Alyson R.; Virji, M. Abbas

2018-01-01

Printing devices are known to emit chemicals into the indoor atmosphere. Understanding factors that influence release of chemical contaminants from printers is necessary to develop effective exposure assessment and control strategies. In this study, a desktop fused deposition modeling (FDM) 3-dimensional (3-D) printer using acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) filaments and two monochrome laser printers were evaluated in a 0.5 m3 chamber. During printing, chamber air was monitored for vapors using a real-time photoionization detector (results expressed as isobutylene equivalents) to measure total volatile organic compound (TVOC) concentrations, evacuated canisters to identify specific VOCs by off-line gas chromatography-mass spectrometry (GC-MS) analysis, and liquid bubblers to identify carbonyl compounds by GC-MS. Airborne particles were collected on filters for off-line analysis using scanning electron microscopy with an energy dispersive x-ray detector to identify elemental constituents. For 3-D printing, TVOC emission rates were influenced by a printer malfunction, filament type, and to a lesser extent, by filament color; however, rates were not influenced by the number of printer nozzles used or the manufacturer’s provided cover. TVOC emission rates were significantly lower for the 3-D printer (49–3552 μg h−1) compared to the laser printers (5782–7735 μg h−1). A total of 14 VOCs were identified during 3-D printing that were not present during laser printing. 3-D printed objects continued to off-gas styrene, indicating potential for continued exposure after the print job is completed. Carbonyl reaction products were likely formed from emissions of the 3-D printer, including 4-oxopentanal. Ultrafine particles generated by the 3-D printer using ABS and a laser printer contained chromium. Consideration of the factors that influenced the release of chemical contaminants (including known and suspected asthmagens such as styrene and 4-oxopentanal) from a FDM 3-D printer should be made when designing exposure assessment and control strategies. PMID:28440728

Zero Launch Mass 3D Printer

NASA Image and Video Library

2018-05-01

Nathan Gelino, a research engineer, manually loads materials into the Zero Launch Mass 3-D Printer at Kennedy Space Center’s Swamp Works Tuesday. The 3-D printer heated the pellets to about 600 degrees F and extruded them to produce specimens for material strength properties testing. Automated pellet delivery system will be added to the printer soon.

Letter to the Editor

NASA Astrophysics Data System (ADS)

2000-01-01

All the Letters to the Editor in this issue are in the same PostScript or PDF file. Contents Looking back on Physics Peter Gill Lecturer in Education, School of Education, King's College London, Franklin-Wilkins Building, Waterloo Road, London SE1 8WA

Gender/Authority, Teacher/Critic.

ERIC Educational Resources Information Center

Helmers, Marguerite

An educator recently contributed a statement concerning some of the difficulties in teaching critical theory to undergraduates, particularly works translated from the French poststructuralists, to the newly published collection "Foregrounding Ethical Awareness in Composition and English Studies." As a postscript, the educator would like…

Regional Geologic Map of San Andreas and Related Faults in Carrizo Plain, Temblor, Caliente and La Panza Ranges and Vicinity, California; A Digital Database

USGS Publications Warehouse

Dibblee, T. W.; Digital database compiled by Graham, S. E.; Mahony, T.M.; Blissenbach, J.L.; Mariant, J.J.; Wentworth, C.M.

1999-01-01

This Open-File Report is a digital geologic map database. The report serves to introduce and describe the digital data. There is no paper map included in the Open-File Report. The report includes PostScript and PDF plot files that can be used to plot images of the geologic map sheet and explanation sheet. This digital map database is prepared from a previously published map by Dibblee (1973). The geologic map database delineates map units that are identified by general age, lithology, and clast size following the stratigraphic nomenclature of the U.S. Geological Survey. For descriptions of the units, their stratigraphic relations, and sources of geologic mapping, consult the explanation sheet (of99-14_4b.ps or of99-14_4d.pdf), or the original published paper map (Dibblee, 1973). The scale of the source map limits the spatial resolution (scale) of the database to 1:125,000 or smaller. For those interested in the geology of Carrizo Plain and vicinity who do not use an ARC/INFO compatible Geographic Information System (GIS), but would like to obtain a paper map and explanation, PDF and PostScript plot files containing map images of the data in the digital database, as well as PostScript and PDF plot files of the explanation sheet and explanatory text, have been included in the database package (please see the section 'Digital Plot Files', page 5). The PostScript plot files require a gzip utility to access them. For those without computer capability, we can provide users with the PostScript or PDF files on tape that can be taken to a vendor for plotting. Paper plots can also be ordered directly from the USGS (please see the section 'Obtaining Plots from USGS Open-File Services', page 5). The content and character of the database, methods of obtaining it, and processes of extracting the map database from the tar (tape archive) file are described herein. The map database itself, consisting of six ARC/INFO coverages, can be obtained over the Internet or by magnetic tape copy as described below. The database was compiled using ARC/INFO, a commercial Geographic Information System (Environmental Systems Research Institute, Redlands, California), with version 3.0 of the menu interface ALACARTE (Fitzgibbon and Wentworth, 1991, Fitzgibbon, 1991, Wentworth and Fitzgibbon, 1991). The ARC/INFO coverages are stored in uncompressed ARC export format (ARC/INFO version 7.x). All data files have been compressed, and may be uncompressed with gzip, which is available free of charge over the Internet via links from the USGS Public Domain Software page (http://edcwww.cr.usgs.gov/doc/edchome/ndcdb/public.html). ARC/INFO export files (files with the .e00 extension) can be converted into ARC/INFO coverages in ARC/INFO (see below) and can be read by some other Geographic Information Systems, such as MapInfo via ArcLink and ESRI's ArcView.

Postscript: The Spirit of the Age

ERIC Educational Resources Information Center

Maclure, Stuart

2008-01-01

This contribution provides a brief endpiece to the Special Issue in honour of Harry Judge from the point of view of a journalist active over much of the period discussed. It focuses particularly on two papers concerned with teacher training in the UK and USA.

Demand for Skilled Workers in Commercial Printing as Perceived by Commercial Printers, Printing Educators, and Printing Trade Services Suppliers. A Summary Report of Research.

ERIC Educational Resources Information Center

Rodriguez, Jesus J.

A study was conducted to determine if differences existed between and among the perceptions of commercial printers, printer educators, and printing trade services suppliers in Texas regarding current and future employment trends for skilled workers in commercial printing. A random sample of commercial printers, high school printing educators, and…

Cost Effective Printing of Laboratory Reports: Biochemist's and Physician's debate and Institutions Dilemma.

PubMed

Harith, Arun Kumar; Avs, Anil Kumar; Sampath, Sangeetha

2017-02-01

Laboratory investigations account for significant percentage of healthcare expenses. Every hospital and laboratory especially in the government sector wants to cut down the expenses on reports and offer inferior printouts of reports. The debate of printing attractive reports (clientele aspiration) Vs costs cutting (managerial issues) continues. It becomes the moral responsibility of doctors to guide the management into implementing an effective and economical option of report transcription. Cutting cost is always good but it should be achieved in an effective way keeping in mind the expectation of all the stake holders and ensuring that quality is not significantly compromised. The data regarding economics of printing available on the Internet may be market driven and not a true reflection of printing cost. The present study was undertaken to generate data on the economics of printing reports on various platforms to enable managers to make informed decision on choice of optimal printing option. To provide practical data on economics of printing reports using various printing options available in the country. Four printing devices (laser printer, inkjet printer, dotmatrix printer and thermal printer) were connected to the laboratory information system and the reports printed from them were critically evaluated for the following parameters - cost of stationary, printing cost, time of printing and clientele satisfaction. The cost of printing a single report on laser printer, inkjet printer, dotmatrix printer and thermal printers was Rs 0.75, Rs 0.65, Rs 0.20 and Rs 0.93 respectively. The time taken to print 30 reports were 162 sec, 193 sec, 210 and 60 sec respectively. Clientele satisfaction scores were best with Laser and Inkjet printed reports. The most economical mode of printing is Dot Matrix printer using DOS output for printing. However, when the workload of a laboratory is high, then the use of laser printer is not prohibitively expensive option and can be resorted to. Use of thermal printer was found to be unsatisfactory.

Exposure to particles from laser printers operating within office workplaces.

PubMed

McGarry, Peter; Morawska, Lidia; He, Congrong; Jayaratne, Rohan; Falk, Matthew; Tran, Quang; Wang, Hao

2011-08-01

While recent research has provided valuable information as to the composition of laser printer particles, their formation mechanisms, and explained why some printers are emitters while others are low emitters, questions relating to the potential exposure of office workers remained unanswered. In particular, (i) what impact does the operation of laser printers have on the background particle number concentration (PNC) of an office environment over the duration of a typical working day? (ii) What is the airborne particle exposure to office workers in the vicinity of laser printers? (iii) What influence does the office ventilation have upon the transport and concentration of particles? (iv) Is there a need to control the generation of, and/or transport of particles arising from the operation of laser printers within an office environment? (v) What instrumentation and methodology is relevant for characterizing such particles within an office location? We present experimental evidence on printer temporal and spatial PNC during the operation of 107 laser printers within open plan offices of five buildings. The 8 h time-weighted average printer particle exposure is significantly less than the 8 h time-weighted local background particle exposure, but that peak printer particle exposure can be greater than 2 orders of magnitude higher than local background particle exposure. The particle size range is predominantly ultrafine (<100 nm diameter). In addition we have established that office workers are constantly exposed to nonprinter derived particle concentrations, with up to an order of magnitude difference in such exposure among offices, and propose that such exposure be controlled along with exposure to printer derived particles. We also propose, for the first time, that peak particle reference values be calculated for each office area analogous to the criteria used in Australia and elsewhere for evaluating exposure excursion above occupational hazardous chemical exposure standards. A universal peak particle reference value of 2.0 × 10(4) particles cm(-3) has been proposed.

Possible costs associated with investigating and mitigating geologic hazards in rural areas of western San Mateo County, California with a section on using the USGS website to determine the cost of developing property for residences in rural parts of San Mateo County, California

USGS Publications Warehouse

Brabb, Earl E.; Roberts, Sebastian; Cotton, William R.; Kropp, Alan L.; Wright, Robert H.; Zinn, Erik N.; Digital database by Roberts, Sebastian; Mills, Suzanne K.; Barnes, Jason B.; Marsolek, Joanna E.

2000-01-01

This publication consists of a digital map database on a geohazards web site, http://kaibab.wr.usgs.gov/geohazweb/intro.htm, this text, and 43 digital map images available for downloading at this site. The report is stored as several digital files, in ARC export (uncompressed) format for the database, and Postscript and PDF formats for the map images. Several of the source data layers for the images have already been released in other publications by the USGS and are available for downloading on the Internet. These source layers are not included in this digital database, but rather a reference is given for the web site where the data can be found in digital format. The exported ARC coverages and grids lie in UTM zone 10 projection. The pamphlet, which only describes the content and character of the digital map database, is included as Postscript, PDF, and ASCII text files and is also available on paper as USGS Open-File Report 00-127. The full versatility of the spatial database is realized by importing the ARC export files into ARC/INFO or an equivalent GIS. Other GIS packages, including MapInfo and ARCVIEW, can also use the ARC export files. The Postscript map image can be used for viewing or plotting in computer systems with sufficient capacity, and the considerably smaller PDF image files can be viewed or plotted in full or in part from Adobe ACROBAT software running on Macintosh, PC, or UNIX platforms.

Evaluation of Nanoparticles Emitted from Printers in a Clean Chamber, a Copy Center and Office Rooms: Health Risks of Indoor Air Quality.

PubMed

Shi, Xiaofei; Chen, Rui; Huo, Lingling; Zhao, Lin; Bai, Ru; Long, Dingxin; Pui, David Y H; Rang, Weiqing; Chen, Chunying

2015-12-01

Indoor air quality has great impact on the human health. An increasing number of studies have shown that printers could release particulate matters and pose adverse effects on indoor air quality. In this study, a thorough investigation was designed to assess the aerosol printer particle total number concentration (TNC) and size distribution in normal office environment, one copy center, and a clean chamber. Particle analyzers, SMPS, OPS, and CPC3007 were used to monitor the total printing process. In normal office environment, 37 laser printers out of all surveyed 55 printers were classified as high particle emitters. Comparing to laser printers, 5 inkjet printers showed no particle emission. Particle emission level in a copy center increased slightly with TNC elevating to about 2 times of the aerosol background. Simulating test in a clean chamber indicated that printer-emitted particles were dominated by particles in nanoscale (diameter of particle, D(p) < 100 nm). These particles in a sealed clean chamber attenuated so slowly that it still held at high level with the concentration of 1.5 x 10(4) particles/cm3 after printing for 2.5 hours. Our present results demonstrate that printers indeed release particulates which keeping at a high concentration level in the indoor environment. Special care should be taken to this kind of widely applied machines and effective controls of particle emission at printing processes are necessary.

Technique for improving the quality of images from digital cameras using ink-jet printers and smoothed RGB transfer curves

NASA Astrophysics Data System (ADS)

Sampat, Nitin; Grim, John F.; O'Hara, James E.

1998-04-01

The digital camera market is growing at an explosive rate. At the same time, the quality of photographs printed on ink- jet printers continues to improve. Most of the consumer cameras are designed with the monitor as the target output device and ont the printer. When a user is printing his images from a camera, he/she needs to optimize the camera and printer combination in order to maximize image quality. We describe the details of one such method for improving image quality using a AGFA digital camera and an ink jet printer combination. Using Adobe PhotoShop, we generated optimum red, green and blue transfer curves that match the scene content to the printers output capabilities. Application of these curves to the original digital image resulted in a print with more shadow detail, no loss of highlight detail, a smoother tone scale, and more saturated colors. The image also exhibited an improved tonal scale and visually more pleasing images than those captured and printed without any 'correction'. While we report the results for one camera-printer combination we tested this technique on numbers digital cameras and printer combinations and in each case produced a better looking image. We also discuss the problems we encountered in implementing this technique.

Bounded tracking for nonminimum phase nonlinear systems with fast zero dynamics

DOT National Transportation Integrated Search

1996-12-01

A PostScript file. In this paper, tracking control laws for nonminimum phase nonlinear systems with both fast and slow, possibly unstable, zero dynamics are derived. The fast zero dynamics arise from a perturbation of a nominal system. These fast zer...

Demographic Paradoxes in the Los Angeles Voting Rights Case.

ERIC Educational Resources Information Center

Clark, William A. V.; Morrison, Peter A.

1991-01-01

How technical demographic analysis can inform and confuse judicial considerations of voting rights principles is illustrated in a review of a 1990 case brought against Los Angeles County (California). A postscripted article considers whether the court involved should rely on after-census estimates for redistricting. (SLD)

Reviews of Selected System and Software Tools for Strategic Defense Applications

DTIC Science & Technology

1990-02-01

Interleaf and FrameMaker . IStatic Diagnostics Basic testing includes validating flows, detecting orphan activity, and checking completeness of activities...Publisher, Aldus PageMaker, Unix pic, Apple .pict metafile, Interleaf, Framemaker , or Postscript format. There are no forms for standard documents such as 3

3D Printer Coupon removal and stowage

NASA Image and Video Library

2014-12-09

iss042e031282 (12/09/2014) ---US Astronaut Barry (Butch) Wilmore holding a 3D coupon works with the new 3D printer aboard the International Space Station. The 3D Printing experiment in zero gravity demonstrates that a 3D printer works normally in space. In general, a 3D printer extrudes streams of heated plastic, metal or other material, building layer on top of layer to create 3 dimensional objects. Testing a 3D printer using relatively low-temperature plastic feedstock on the International Space Station is the first step towards establishing an on-demand machine shop in space, a critical enabling component for deep-space crewed missions and in-space manufacturing.

Cost Effective Printing of Laboratory Reports: Biochemist’s and Physician’s debate and Institutions Dilemma

PubMed Central

Harith, Arun Kumar; Sampath, Sangeetha

2017-01-01

Introduction Laboratory investigations account for significant percentage of healthcare expenses. Every hospital and laboratory especially in the government sector wants to cut down the expenses on reports and offer inferior printouts of reports. The debate of printing attractive reports (clientele aspiration) Vs costs cutting (managerial issues) continues. It becomes the moral responsibility of doctors to guide the management into implementing an effective and economical option of report transcription. Cutting cost is always good but it should be achieved in an effective way keeping in mind the expectation of all the stake holders and ensuring that quality is not significantly compromised. The data regarding economics of printing available on the Internet may be market driven and not a true reflection of printing cost. The present study was undertaken to generate data on the economics of printing reports on various platforms to enable managers to make informed decision on choice of optimal printing option. Aim To provide practical data on economics of printing reports using various printing options available in the country. Materials and Methods Four printing devices (laser printer, inkjet printer, dotmatrix printer and thermal printer) were connected to the laboratory information system and the reports printed from them were critically evaluated for the following parameters - cost of stationary, printing cost, time of printing and clientele satisfaction. Results The cost of printing a single report on laser printer, inkjet printer, dotmatrix printer and thermal printers was Rs 0.75, Rs 0.65, Rs 0.20 and Rs 0.93 respectively. The time taken to print 30 reports were 162 sec, 193 sec, 210 and 60 sec respectively. Clientele satisfaction scores were best with Laser and Inkjet printed reports. Conclusion The most economical mode of printing is Dot Matrix printer using DOS output for printing. However, when the workload of a laboratory is high, then the use of laser printer is not prohibitively expensive option and can be resorted to. Use of thermal printer was found to be unsatisfactory. PMID:28384854

A new framework for an electrophotographic printer model

NASA Astrophysics Data System (ADS)

Colon-Lopez, Fermin A.

Digital halftoning is a printing technology that creates the illusion of continuous tone images for printing devices such as electrophotographic printers that can only produce a limited number of tone levels. Digital halftoning works because the human visual system has limited spatial resolution which blurs the printed dots of the halftone image, creating the gray sensation of a continuous tone image. Because the printing process is imperfect it introduces distortions to the halftone image. The quality of the printed image depends, among other factors, on the complex interactions between the halftone image, the printer characteristics, the colorant, and the printing substrate. Printer models are used to assist in the development of new types of halftone algorithms that are designed to withstand the effects of printer distortions. For example, model-based halftone algorithms optimize the halftone image through an iterative process that integrates a printer model within the algorithm. The two main goals of a printer model are to provide accurate estimates of the tone and of the spatial characteristics of the printed halftone pattern. Various classes of printer models, from simple tone calibrations to complex mechanistic models, have been reported in the literature. Existing models have one or more of the following limiting factors: they only predict tone reproduction, they depend on the halftone pattern, they require complex calibrations or complex calculations, they are printer specific, they reproduce unrealistic dot structures, and they are unable to adapt responses to new data. The two research objectives of this dissertation are (1) to introduce a new framework for printer modeling and (2) to demonstrate the feasibility of such a framework in building an electrophotographic printer model. The proposed framework introduces the concept of modeling a printer as a texture transformation machine. The basic premise is that modeling the texture differences between the output printed images and the input images encompasses all printing distortions. The feasibility of the framework was tested with a case study modeling a monotone electrophotographic printer. The printer model was implemented as a bank of feed-forward neural networks, each one specialized in modeling a group of textural features of the printed halftone pattern. The textural features were obtained using a parametric representation of texture developed from a multiresolution decomposition proposed by other researchers. The textural properties of halftone patterns were analyzed and the key texture parameters to be modeled by the bank were identified. Guidelines for the multiresolution texture decomposition and the model operational parameters and operational limits were established. A method for the selection of training sets based on the morphological properties of the halftone patterns was also developed. The model is fast and has the capability to continue to learn with additional training. The model can be easily implemented because it only requires a calibrated scanner. The model was tested with halftone patterns representing a range of spatial characteristics found in halftoning. Results show that the model provides accurate predictions for the tone and the spatial characteristics when modeling halftone patterns individually and it provides close approximations when modeling multiple halftone patterns simultaneously. The success of the model justifies continued research of this new printer model framework.

Design and Fabrication of a Radio Frequency GRIN Lens Using 3D Printing Technology

DTIC Science & Technology

2013-04-01

simulation of a homogenized 3D lens ..................... 6 Figure 4: GRIN lens fabricated using 3D printer ...properties of the dielectric used by the 3D printer are ε=2.86 in the frequency regime of interest. We begin with a structure where the dimensions are...CHARACTERIZATION OF THE LENS We used a 3D rapid prototyping printer to fabricate the GRIN lens shown in Figure 4. 3D printers can be used to print a diverse

Design and Implementation of a Pretty Printer for the Functional Specification Language SPEC

DTIC Science & Technology

1988-06-01

language independent pretty printer using Kodiyak and attribute grammars. These general guidelines are a direct result of the insight gained from the...outlined. The final subject in this chapter is the general and specific rules for the pretty printer. A user of the pretty printer code needs only a working...an extension of a context-free grammar whose generated language includes syntax and semantics. A context-free grammar (CFG) is a four tuple G (N,T, P ,S

Education Takes Hit in Budgets

ERIC Educational Resources Information Center

Cavanagh, Sean

2011-01-01

After months of arduous negotiation and partisan squabbling, states across the country have produced budgets for the new fiscal year that in many cases will bring deep cuts to state spending, including money for schools. The budget blueprints adopted by numerous states were postscripts to divisive legislative sessions that saw newly elected…

Comparative Education Histories: A Postscript

ERIC Educational Resources Information Center

Manzon, Maria

2018-01-01

Comparative education is two centuries old. Many mainstream historical narratives claim that the field began with the iconic opus of Marc-Antoine Jullien de Paris (1817). This article offers to re-theorise the histories of comparative education. It suggests casting a far-sighted and panoramic look at the field's origins. An underlying assumption…

Teachers for the Global Age: A Call to Action for Funders

ERIC Educational Resources Information Center

Devlin-Foltz, Betsy

2010-01-01

This postscript commentary challenges private and public funders to take action in support of the internationalization of teacher preparation programs by funding efforts for much needed resources, in order to prepare twenty-first-century teachers to teach with global perspectives. Specific ideas for foundations, corporate philanthropy, and…

Postscript: Identity and Constraints in Models of Object Formation

ERIC Educational Resources Information Center

Kellman, Philip J.; Garrigan, Patrick; Shipley, Thomas F.; Keane, Brian P.

2007-01-01

Presents some additional comments from the current authors regarding their original article Interpolation processes in object perception: Reply to Anderson (2007). As this exchange concludes, we believe that the account of interpolation and object formation proposed by Kellman and Shipley (1991), further developed in recent years (Kellman, 2003;…

Moments in the Life of a Scientist

NASA Astrophysics Data System (ADS)

Rossi, Bruno

2008-07-01

List of plates; Foreword; Preface; Prehistory; 1. Arcetri (1928-32); 2. Padua, Copenhagen, Manchester; 3. Physics of elementary particles in the Age of Innocence (1939-46); 4. Los Alamos (1943-46); 5. Cosmic rays at MIT (1946- ); 6. Physics in space; Postscript; As for me … Nora Rossi; Index.

Political Education: National Policy Comes of Age. The Updated Edition

ERIC Educational Resources Information Center

Cross, Christopher T.

2010-01-01

Political insider Christopher Cross has updated his critically acclaimed book to reflect recent education policy developments, including the impact of the Obama administration and "Race to the Top" as well as the controversy over NCLB's reauthorization. Featuring a new introduction and the addition of postscripts for key chapters, this…

Spontaneous Repetitive Thoughts Can Be Adaptive: Postscript on "Mind Wandering"

ERIC Educational Resources Information Center

Baars, Bernard J.

2010-01-01

When researchers use the term "mind wandering" for task-unrelated thoughts in signal detection tasks, we may fall into the trap of believing that spontaneous thoughts are task unrelated in a deeper sense. Similar negative connotations are attached to common terms like "cognitive failures", "resting state", "rumination", "distraction", "attentional…

Ultra-Portable Solar-Powered 3D Printers for Onsite Manufacturing of Medical Resources.

PubMed

Wong, Julielynn Y

2015-09-01

The first space-based fused deposition modeling (FDM) 3D printer is powered by solar photovoltaics. This study seeks to demonstrate the feasibility of using solar energy to power a FDM 3D printer to manufacture medical resources at the Mars Desert Research Station and to design an ultra-portable solar-powered 3D printer for off-grid environments. Six solar panels in a 3×2 configuration, a voltage regulator/capacitor improvised from a power adapter, and two 12V batteries in series were connected to power a FDM 3D printer. Three designs were printed onsite and evaluated by experts post analogue mission. A solar-powered 3D printer composed of off-the-shelf components was designed to be transported in airline carry-on luggage. During the analogue mission, the solar-powered printer could only be operated for <1 h/d, but was able to fabricate a functional dental tool, scalpel handle, and customized mallet splint over 2 d. Post analogue mission, an ultra-portable plug-and-play solar-powered 3D printer was designed that could print an estimated 16 dental tools or 8 mallet finger splints or 7 scalpel handles on one fully charged 12V 150Wh battery with a 110V AC converter. It is feasible to use solar energy to power a 3D printer to manufacture functional and personalized medical resources at a Mars analogue research station. Based on these findings, a solar-powered suitcase 3D printing system containing solar panels, 12V battery with charge controller and AC inverter, and back-up solar charge controller and inverter was designed for transport to and use in off-grid communities.

75 FR 18209 - Depository Library Council to the Public Printer; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... the Federal Depository Library Program. All sessions are open to the public. The sleeping rooms... GOVERNMENT PRINTING OFFICE Depository Library Council to the Public Printer; Meeting The Depository Library Council to the Public Printer (DLC) will meet on Monday, April 26, 2010, through Wednesday...

78 FR 56706 - Depository Library Council to the Public Printer; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... GOVERNMENT PRINTING OFFICE Depository Library Council to the Public Printer; Meeting The Depository Library Council to the Public Printer (DLC) will meet on Monday, October 21, 2013 through... Columbia. The purpose of this meeting is to discuss the Federal Depository Library Program. All sessions...

77 FR 58381 - Depository Library Council to the Public Printer; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... GOVERNMENT PRINTING OFFICE Depository Library Council to the Public Printer; Meeting The Depository Library Council to the Public Printer will meet on Monday, October 15, 2012 through Thursday... Drive, Arlington, VA. The purpose of this meeting is to discuss the Federal Depository Library Program...

75 FR 61760 - Depository Library Council to the Public Printer; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... to discuss the Federal Depository Library Program. All sessions are open to the public. The sleeping... GOVERNMENT PRINTING OFFICE Depository Library Council to the Public Printer; Meeting The Depository Library Council to the Public Printer (DLC) will meet on Monday, October 18, 2010, through...

76 FR 58005 - Meeting Notice; Depository Library Council to the Public Printer

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Drive, Arlington, Virginia, to discuss the Federal Depository Library Program. All sessions are open to... GOVERNMENT PRINTING OFFICE Meeting Notice; Depository Library Council to the Public Printer The Depository Library Council to the Public Printer (DLC) will meet on Monday, October 17, through Thursday...

76 FR 13617 - Depository Library Council to the Public Printer Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... to discuss the Federal Depository Library Program. All sessions are open to the public. The sleeping... GOVERNMENT PRINTING OFFICE Depository Library Council to the Public Printer Meeting The Depository Library Council to the Public Printer (DLC) will meet on Monday, April 4, 2011 through Wednesday, April 6...

48 CFR 1552.239-103 - Acquisition of Energy Star Compliant Microcomputers, Including Personal Computers, Monitors and...

Code of Federal Regulations, 2012 CFR

2012-10-01

... Compliant Microcomputers, Including Personal Computers, Monitors and Printers. 1552.239-103 Section 1552.239... Star Compliant Microcomputers, Including Personal Computers, Monitors and Printers. As prescribed in... Personal Computers, Monitors, and Printers (APR 1996) (a) The Contractor shall provide computer products...

48 CFR 1552.239-103 - Acquisition of Energy Star Compliant Microcomputers, Including Personal Computers, Monitors and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Compliant Microcomputers, Including Personal Computers, Monitors and Printers. 1552.239-103 Section 1552.239... Star Compliant Microcomputers, Including Personal Computers, Monitors and Printers. As prescribed in... Personal Computers, Monitors, and Printers (APR 1996) (a) The Contractor shall provide computer products...

48 CFR 1552.239-103 - Acquisition of Energy Star Compliant Microcomputers, Including Personal Computers, Monitors and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Compliant Microcomputers, Including Personal Computers, Monitors and Printers. 1552.239-103 Section 1552.239... Star Compliant Microcomputers, Including Personal Computers, Monitors and Printers. As prescribed in... Personal Computers, Monitors, and Printers (APR 1996) (a) The Contractor shall provide computer products...

Letters to the Editor

NASA Astrophysics Data System (ADS)

1997-07-01

All the Letters to the Editor in this issue are in the same PostScript or PDF file. Contents Joining capacitors R Bridges King Edward's School, Birmingham B15 2UA, UK Enjoying Physics John Bausor 5 Longcrofte Road, Edgware, Middlesex HA8 6RR, UK The disadvantages of success M L Cooper Newham College of Further Education, London

Clashing Views on Controversial Bioethical Issues. Third Edition. Taking Sides.

ERIC Educational Resources Information Center

Levine, Carol, Ed.

The student who has thoughtfully examined opposing viewpoints on an issue should perceive what other position can be occupied on that issue and should learn to carefully consider antithetical viewpoints. The development of this critical approach is the purpose of this book. An introduction, postscript summary, and two articles or published…

Postscript: Distinguishing between Temporal Context and Short-Term Store

ERIC Educational Resources Information Center

Howard, Marc W.; Kahana, Michael J.; Sederberg, Per B.

2008-01-01

Space does not allow us to make detailed rebuttals to Davelaar, Usher, Haarmann, and Goshen-Gottstein's criticisms of the temporal context model's (TCM-A's) ability to account for dissociations between immediate and delayed recall nor to explain how TCM could account for list discrimination experiments. We agree that future work is needed to reach…

Postscript: Contrasting Predictions for Preference Reversal

ERIC Educational Resources Information Center

Usher, Marius; Tsetsos, Konstantinos; Chater, Nick

2010-01-01

In this post scrit, the authors discuss an article by Hotaling, Busemeyer, and Li which provided a valuable reply to the challenges the current authors raised for the decision field theory (DFT) account of preference reversal in multiattribute choice. They agree with Hotaling, Busemeyer, and Li's observation that with the addition of an internal…

Clashing Views on Controversial Environmental Issues. Third Edition. Taking Sides.

ERIC Educational Resources Information Center

Goldfarb, Theodore D., Ed.

The student who has thoughtfully examined opposing viewpoints on an issue should perceive what other position can be occupied on that issue and should learn to carefully consider antithetical viewpoints. The development of this critical approach is the purpose of this book. An introduction, postscript summary, and pro and con articles or published…

Handbook on the Organization and Management of Distance Education Study Centres.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

This handbook discusses the role, structures, organization, and management of study centers as they operate in different postsecondary settings in the Asia Pacific region. Eight chapters and a postscript are included: (1) introduction; (2) what is a study center; (3) why might an institution want study centers--functions, architectural types,…

Put Some Movie Wow! in Your Chemistry Teaching

ERIC Educational Resources Information Center

Frey, Christopher A.; Mikasen, Marjorie L.; Griep, Mark A.

2012-01-01

Movies and movie clips have been used by many instructors to teach chemistry. Entire movies based on true chemical stories are used because they provide students with a common experience after which instructors can launch writing lessons about the chemistry, the scientists, or engineers, or even postscripts to the story presented in the film. In…

Kenneth Burke's Appendicitis: A Feminist's Case for Complaint.

ERIC Educational Resources Information Center

Worsham, Lynn

1991-01-01

Demonstrates the relationship of disease and language in Kenneth Burke's work, tracing it to a chronic symbolic condition, the symptoms of which are found in his frequent recourse to the genre of the appendix and its close relations--the postscript, the addendum, and the afterward. Discusses Burke's work from a feminist and anatomical perspective.…

Postscript: Split Spatial Attention? The Data Remain Difficult to Interpret

ERIC Educational Resources Information Center

Jans, Bert; Peters, Judith C.; De Weerd, Peter

2010-01-01

A growing number of studies claim that spatial attention can be split "on demand" into several, segregated foci of enhanced processing. Intrigued by the theoretical ramifications of this proposal, we analyzed 19 relevant sets of experiments using four methodological criteria. We typically found several methodological limitations in each study that…

Design, Development, and Testing of a Network Frequency Selection Service (NFSS)

DTIC Science & Technology

1994-02-14

mercial simulation software (Sim++), word processor ( FrameMaker ), editor (Gnu Emacs), software ver- sion control (Revision Control System (RCS)), system...of FrameMaker ".mif" files. When viewed using FrameMaker or a PostScript reader, each page of results appears as two columns by four rows of graphics

Postscript: Through TCM, STM Shines Bright

ERIC Educational Resources Information Center

Davelaar, Eddy J.; Usher, Marius; Haarmann, Henk J.; Goshen-Gottstein, Yonatan

2008-01-01

We find the reply by Kahana, Sederberg, and Howard helpful in clarifying the temporal-context model (TCM) function, in particular with regard to the elimination of the recency effect by a difficult distractor under parameters that still enable long-term contiguity effects to emerge. We agree with Kahana et al. that what matters most to the…

Reactance, Restoration, and Cognitive Structure: Comparative Statics

ERIC Educational Resources Information Center

Bessarabova, Elena; Fink, Edward L.; Turner, Monique

2013-01-01

This study (N = 143) examined the effects of freedom threat on cognitive structures, using recycling as its topic. The results of a 2(Freedom Threat: low vs. high) x 2(Postscript: restoration vs. filler) plus 1(Control) experiment indicated that, relative to the control condition, high freedom threat created a boomerang effect for the targeted…

78 FR 32424 - Notice of Issuance of Final Determination Concerning Monochrome Laser Printers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... for manufacture in the U.S. and subsequent sale to U.S. government agencies. Ricoh states that it developed the SP52000-series printers in Japan, and that the entire engineering, development, design and..., Ltd. At the initial stage of the printers production process, individual parts are assembled into...

Simulating forest pictures by impact printers

Treesearch

Elliot L. Amidon; E. Joyce Dye

1978-01-01

Two mechanical devices that are mainly used to print computer output in text form can simulate pictures of terrain and forests. The line printer, which is available for batch processing at many computer installations, can approximate halftones by using overstruck characters to produce successively larger "dots." The printer/plotter, which is normally used as...

Least-squares model-based halftoning

NASA Astrophysics Data System (ADS)

Pappas, Thrasyvoulos N.; Neuhoff, David L.

1992-08-01

A least-squares model-based approach to digital halftoning is proposed. It exploits both a printer model and a model for visual perception. It attempts to produce an 'optimal' halftoned reproduction, by minimizing the squared error between the response of the cascade of the printer and visual models to the binary image and the response of the visual model to the original gray-scale image. Conventional methods, such as clustered ordered dither, use the properties of the eye only implicitly, and resist printer distortions at the expense of spatial and gray-scale resolution. In previous work we showed that our printer model can be used to modify error diffusion to account for printer distortions. The modified error diffusion algorithm has better spatial and gray-scale resolution than conventional techniques, but produces some well known artifacts and asymmetries because it does not make use of an explicit eye model. Least-squares model-based halftoning uses explicit eye models and relies on printer models that predict distortions and exploit them to increase, rather than decrease, both spatial and gray-scale resolution. We have shown that the one-dimensional least-squares problem, in which each row or column of the image is halftoned independently, can be implemented with the Viterbi's algorithm. Unfortunately, no closed form solution can be found in two dimensions. The two-dimensional least squares solution is obtained by iterative techniques. Experiments show that least-squares model-based halftoning produces more gray levels and better spatial resolution than conventional techniques. We also show that the least- squares approach eliminates the problems associated with error diffusion. Model-based halftoning can be especially useful in transmission of high quality documents using high fidelity gray-scale image encoders. As we have shown, in such cases halftoning can be performed at the receiver, just before printing. Apart from coding efficiency, this approach permits the halftoner to be tuned to the individual printer, whose characteristics may vary considerably from those of other printers, for example, write-black vs. write-white laser printers.

Emission of particulate matter from a desktop three-dimensional (3D) printer

PubMed Central

Yi, Jinghai; LeBouf, Ryan F.; Duling, Matthew G.; Nurkiewicz, Timothy; Chen, Bean T.; Schwegler-Berry, Diane; Virji, M. Abbas; Stefaniak, Aleksandr B.

2016-01-01

ABSTRACT Desktop three-dimensional (3D) printers are becoming commonplace in business offices, public libraries, university labs and classrooms, and even private homes; however, these settings are generally not designed for exposure control. Prior experience with a variety of office equipment devices such as laser printers that emit ultrafine particles (UFP) suggests the need to characterize 3D printer emissions to enable reliable risk assessment. The aim of this study was to examine factors that influence particulate emissions from 3D printers and characterize their physical properties to inform risk assessment. Emissions were evaluated in a 0.5-m3 chamber and in a small room (32.7 m3) using real-time instrumentation to measure particle number, size distribution, mass, and surface area. Factors evaluated included filament composition and color, as well as the manufacturer-provided printer emissions control technologies while printing an object. Filament type significantly influenced emissions, with acrylonitrile butadiene styrene (ABS) emitting larger particles than polylactic acid (PLA), which may have been the result of agglomeration. Geometric mean particle sizes and total particle (TP) number and mass emissions differed significantly among colors of a given filament type. Use of a cover on the printer reduced TP emissions by a factor of 2. Lung deposition calculations indicated a threefold higher PLA particle deposition in alveoli compared to ABS. Desktop 3D printers emit high levels of UFP, which are released into indoor environments where adequate ventilation may not be present to control emissions. Emissions in nonindustrial settings need to be reduced through the use of a hierarchy of controls, beginning with device design, followed by engineering controls (ventilation) and administrative controls such as choice of filament composition and color. PMID:27196745

Vector generator scan converter

DOEpatents

Moore, James M.; Leighton, James F.

1990-01-01

High printing speeds for graphics data are achieved with a laser printer by transmitting compressed graphics data from a main processor over an I/O (input/output) channel to a vector generator scan converter which reconstructs a full graphics image for input to the laser printer through a raster data input port. The vector generator scan converter includes a microprocessor with associated microcode memory containing a microcode instruction set, a working memory for storing compressed data, vector generator hardward for drawing a full graphic image from vector parameters calculated by the microprocessor, image buffer memory for storing the reconstructed graphics image and an output scanner for reading the graphics image data and inputting the data to the printer. The vector generator scan converter eliminates the bottleneck created by the I/O channel for transmitting graphics data from the main processor to the laser printer, and increases printer speed up to thirty fold.

Vector generator scan converter

DOEpatents

Moore, J.M.; Leighton, J.F.

1988-02-05

High printing speeds for graphics data are achieved with a laser printer by transmitting compressed graphics data from a main processor over an I/O channel to a vector generator scan converter which reconstructs a full graphics image for input to the laser printer through a raster data input port. The vector generator scan converter includes a microprocessor with associated microcode memory containing a microcode instruction set, a working memory for storing compressed data, vector generator hardware for drawing a full graphic image from vector parameters calculated by the microprocessor, image buffer memory for storing the reconstructed graphics image and an output scanner for reading the graphics image data and inputting the data to the printer. The vector generator scan converter eliminates the bottleneck created by the I/O channel for transmitting graphics data from the main processor to the laser printer, and increases printer speed up to thirty fold. 7 figs.

The Future Is 3D

ERIC Educational Resources Information Center

Carter, Luke

2015-01-01

3D printers are a way of producing a 3D model of an item from a digital file. The model builds up in successive layers of material placed by the printer controlled by the information in the computer file. In this article the author argues that 3D printers are one of the greatest technological advances of recent times. He discusses practical uses…

3D printing: making things at the library.

PubMed

Hoy, Matthew B

2013-01-01

3D printers are a new technology that creates physical objects from digital files. Uses for these printers include printing models, parts, and toys. 3D printers are also being developed for medical applications, including printed bone, skin, and even complete organs. Although medical printing lags behind other uses for 3D printing, it has the potential to radically change the practice of medicine over the next decade. Falling costs for hardware have made 3D printers an inexpensive technology that libraries can offer their patrons. Medical librarians will want to be familiar with this technology, as it is sure to have wide-reaching effects on the practice of medicine.

Synthesis of crystalline gels on a light-induced polymerization 3D printer (Conference Presentation)

NASA Astrophysics Data System (ADS)

Gong, Jin; Mao, Yuchen; Miyazaki, Takuya; Zhu, Meifang

2017-04-01

3D printing, also knows as Additive Manufacturing (AM), was first commercialized in 1986, and has been growing at breakneck speed since 2009 when Stratasys' key patent expired. Currently the 3D printing machines coming on the market can be broadly classified into three categories from the material state point of view: plastic filament printers, powder (or pellet) printers, film printers and liquid photopolymer printers. Much of the work in our laboratory revolves around the crystalline gels. We have succeeded in developing them with high toughness, high flexibility, particularly with many functions as shape memory, energy storage, freshness-retaining, water-absorbing, etc. These crystalline gels are synthesized by light-induced radical polymerization that involves light-reactive monomer having the property of curing with light of a sufficient energy to drive the reaction from liquid to solid. Note that the light-induced polymerized 3D printing uses the same principle. To open up the possibilities for broader application of our crystalline functional gels, we are interested in making them available for 3D printing. In this paper, we share the results of our latest research on the 3D printing of crystalline gels on light-induced 3D printers.

America’s Federal Law Enforcement Future: Achieving Unity of Effort for the Twenty-First Century

DTIC Science & Technology

2012-04-27

Analysis, no. 683 (Washington, DC: CATO Institute, 2011). http://www.cato.org/pubs/pas/PA683.pdf. Seeley , Mark T. "The Goldwater-Nichols Department of...Mark T. Seeley , “The Goldwater - Nichols Department of Defense Act of 1986: Genesis and Postscript,” (Master’s Thesis, Naval Postgraduate School, 1987

System Engineering Concept Demonstration, Interface Standards Studies. Volume 4

DTIC Science & Technology

1992-12-01

Xerox’s Palo Alto Research Center (PARC) 25 begat the Xerox Star; Steve Jobs visited PARC, saw the Star, went back to Apple, and begat the Mac. But...Author of Adobe Systems, PostScript Language Program Design, has left Adobe to join Steve Jobs ’ NeXT, Inc. Reid worked for Adobe Systems for four and a

Postscript: Plaut and Booth's (2006) New Simulations--What Have We Learned?

ERIC Educational Resources Information Center

Besner, Derek; Borowsky, Ron

2006-01-01

This paper comments on the article by Plaut and Booth. Plaut and Booth's first simulation shows that there is essentially perfect discrimination between word and nonwords sharing the same orthographic structure when the simulation is carried out in the way we suggested. We take the view that Plaut and Booth's new simulation work settles little…

Precis: Quantum Feedback

NASA Astrophysics Data System (ADS)

Wiseman, H. M.

2003-09-01

The following is the body of page ix of the PhD thesis Quantum Trajectories and Feedback by H.M. Wiseman (Physics Department, University of Queensland, 1994), which is downloadable as a postscript file at http://www.sct.gu.edu.au/~sctwiseh/PhDThesis.ps.z . It is (as it described itself) a very brief technical summary of the most important results therein.

A Postscript on Institutional Motivations, Research Concerns and Professional Implications

ERIC Educational Resources Information Center

Dalton-Puffer, Christiane

2012-01-01

From the point of view of AILA's research network "CLIL and Immersion Education: Applied Linguistic Perspectives" this volume finally does justice to a strand of interest that has been part of the network from its inception. As the editors rightly point out in the introduction, ReN events and publications during the network's first…

A "No Prescriptives, Please" Proposal Postscript: When Desperate Times Require Desperate Measures

ERIC Educational Resources Information Center

Robinson, Daniel H.; Levin, Joel R.

2013-01-01

We appreciate the thoughtful reactions of our colleagues to the "no prescriptives, please" proposal of Robinson et al. (2013), as well as the opportunity to respond to them. For the most part, our colleagues seem to agree that a problem exists in terms of unwarranted recommendations for practice appearing too often in educational…

Letters to the Editor

NASA Astrophysics Data System (ADS)

1997-03-01

All the Letters to the Editor in this issue are in the same PostScript or PDF file. Contents Criticisms of hands-on pseudoscience David J Fisher 27 Elderberry Road, Cardiff CF5 3RG, UK Measuring varying fields Don Koks Adelaide University, Australia Relativity at A-level: a comment David Sang 3 Ellasdale Road, Bognor Regis, PO21 2SG, UK

CNT Based Artificial Hair Sensors for Predictable Boundary Layer Air Flow Sensing (Postscript)

DTIC Science & Technology

2016-11-07

hairs. The moment sensitivity is shown to scale inversely with the CNT length and stiffness to a typical maximum of 1.3 ± 0.4% resistance change nN−1...determined air flow is obtained using theory and measurement for various lengths of hairs. The moment sensitivity is shown to scale inversely with the

Postscript: Reading in Semantic Dementia--A Response to Woollams, Lambon Ralph, Plaut, and Patterson (2010)

ERIC Educational Resources Information Center

Coltheart, Max; Tree, Jeremy J.; Saunders, Steven J.

2010-01-01

The current authors reply to a response by Woollams, Lambon Ralph, Plaut, and Patterson on a comment by the current authors on the original article. The current authors list their agreements and disagreements with Woollams, Lambon Ralph, Plaut, and Patterson's response on the topics of the human reading system, cognitive architecture, experimental…

Zero Launch Mass 3D printer

NASA Image and Video Library

2018-05-01

Packing light is the idea behind the Zero Launch Mass 3-D Printer. Instead of loading up on heavy building supplies, a large scale 3-D printer capable of using recycled plastic waste and dirt at the destination as construction material would save mass and money when launching robotic precursor missions to build infrastructure on the Moon or Mars in preparation for human habitation. To make this a reality, Nathan Gelino, a researcher engineer with NASA’s Swamp Works at Kennedy Space Center, measured the temperature of a test specimen from the 3-D printer Tuesday as an early step in characterizing printed material strength properties. Material temperature plays a large role in the strength of bonds between layers.

Application of Optical Disc Databases and Related Technology to Public Access Settings

DTIC Science & Technology

1992-03-01

users to download and retain data. A Video Graphics Adapter (VGA) monitor was included. No printer was provided. 2. CD-ROM Product Computer Select, a...download facilities, without printer support, satisfy user needs? 38 A secondary, but significant, objective was avoidance of unnecessary Reader...design of User Log sheets and mitigated against attachment of a printer to the workstation. F. DATA COLLECTION This section describes the methodology

Intelligent Fault Diagnosis of Delta 3D Printers Using Attitude Sensors Based on Support Vector Machines

PubMed Central

He, Kun; Yang, Zhijun; Bai, Yun; Long, Jianyu; Li, Chuan

2018-01-01

Health condition is a vital factor affecting printing quality for a 3D printer. In this work, an attitude monitoring approach is proposed to diagnose the fault of the delta 3D printer using support vector machines (SVM). An attitude sensor was mounted on the moving platform of the printer to monitor its 3-axial attitude angle, angular velocity, vibratory acceleration and magnetic field intensity. The attitude data of the working printer were collected under different conditions involving 12 fault types and a normal condition. The collected data were analyzed for diagnosing the health condition. To this end, the combination of binary classification, one-against-one with least-square SVM, was adopted for fault diagnosis modelling by using all channels of attitude monitoring data in the experiment. For comparison, each one channel of the attitude monitoring data was employed for model training and testing. On the other hand, a back propagation neural network (BPNN) was also applied to diagnose fault using the same data. The best fault diagnosis accuracy (94.44%) was obtained when all channels of the attitude monitoring data were used with SVM modelling. The results indicate that the attitude monitoring with SVM is an effective method for the fault diagnosis of delta 3D printers. PMID:29690641

Intelligent Fault Diagnosis of Delta 3D Printers Using Attitude Sensors Based on Support Vector Machines.

PubMed

He, Kun; Yang, Zhijun; Bai, Yun; Long, Jianyu; Li, Chuan

2018-04-23

Health condition is a vital factor affecting printing quality for a 3D printer. In this work, an attitude monitoring approach is proposed to diagnose the fault of the delta 3D printer using support vector machines (SVM). An attitude sensor was mounted on the moving platform of the printer to monitor its 3-axial attitude angle, angular velocity, vibratory acceleration and magnetic field intensity. The attitude data of the working printer were collected under different conditions involving 12 fault types and a normal condition. The collected data were analyzed for diagnosing the health condition. To this end, the combination of binary classification, one-against-one with least-square SVM, was adopted for fault diagnosis modelling by using all channels of attitude monitoring data in the experiment. For comparison, each one channel of the attitude monitoring data was employed for model training and testing. On the other hand, a back propagation neural network (BPNN) was also applied to diagnose fault using the same data. The best fault diagnosis accuracy (94.44%) was obtained when all channels of the attitude monitoring data were used with SVM modelling. The results indicate that the attitude monitoring with SVM is an effective method for the fault diagnosis of delta 3D printers.

A desktop 3D printer with dual extruders to produce customised electronic circuitry

NASA Astrophysics Data System (ADS)

Butt, Javaid; Onimowo, Dominic Adaoiza; Gohrabian, Mohammed; Sharma, Tinku; Shirvani, Hassan

2018-03-01

3D printing has opened new horizons for the manufacturing industry in general, and 3D printers have become the tools for technological advancements. There is a huge divide between the pricing of industrial and desktop 3D printers with the former being on the expensive side capable of producing excellent quality products and latter being on the low-cost side with moderate quality results. However, there is a larger room for improvements and enhancements for the desktop systems as compared to the industrial ones. In this paper, a desktop 3D printer called Prusa Mendel i2 has been modified and integrated with an additional extruder so that the system can work with dual extruders and produce bespoke electronic circuits. The communication between the two extruders has been established by making use of the In-Chip Serial Programming port on the Arduino Uno controlling the printer. The biggest challenge is to control the flow of electric paint (to be dispensed by the new extruder) and CFD (Computational Fluid Dynamics) analysis has been carried out to ascertain the optimal conditions for proper dispensing. The final product is a customised electronic circuit with the base of plastic (from the 3D printer's extruder) and electronic paint (from the additional extruder) properly dispensed to create a live circuit on a plastic platform. This low-cost enhancement to a desktop 3D printer can provide a new prospect to produce multiple material parts where the additional extruder can be filled with any material that can be properly dispensed from its nozzle.

Postscript: Making Important Distinctions--Diagnostic Models, Theoretical Models, and the Mnemonic Model of PTSD

ERIC Educational Resources Information Center

Monroe, Scott M.; Mineka, Susan

2008-01-01

Our commentary was intended to stimulate discussion about what we perceive to be shortcomings of the mnemonic model and its research base, in the hope of shedding some light on key questions for understanding posttraumatic stress disorder (PTSD). In our view, Berntsen, Rubin, and Bohni have responded only to what they perceive to be shortcomings…

Postscript: About Grandmother Cells and Jennifer Aniston Neurons

ERIC Educational Resources Information Center

Quian Quiroga, Rodrigo; Kreiman, Gabriel

2010-01-01

The current authors reply to a response by Bowers on a comment by the current authors on the original article. A typical problem in any discussion about grandmother cells is that there is not a general consensus about what should be called as such. Here, we discuss possible interpretations in turn and contrast them with what we find in our own…

ESDAPT - APT PROGRAMMING EDITOR AND INTERPRETER

NASA Technical Reports Server (NTRS)

Premack, T.

1994-01-01

ESDAPT is a graphical programming environment for developing APT (Automatically Programmed Tool) programs for controlling numerically controlled machine tools. ESDAPT has a graphical user interface that provides the user with an APT syntax sensitive text editor and windows for displaying geometry and tool paths. APT geometry statement can also be created using menus and screen picks. ESDAPT interprets APT geometry statements and displays the results in its view windows. Tool paths are generated by batching the APT source to an APT processor (COSMIC P-APT recommended). The tool paths are then displayed in the view windows. Hardcopy output of the view windows is in color PostScript format. ESDAPT is written in C-language, yacc, lex, and XView for use on Sun4 series computers running SunOS. ESDAPT requires 4Mb of disk space, 7Mb of RAM, and MIT's X Window System, Version 11 Release 4, or OpenWindows version 3 for execution. Program documentation in PostScript format and an executable for OpenWindows version 3 are provided on the distribution media. The standard distribution medium for ESDAPT is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. This program was developed in 1992.

Custom 3D Printers Revolutionize Space Supply Chain

NASA Technical Reports Server (NTRS)

2015-01-01

Under a series of SBIR contracts with Marshall Space Flight Center, start-up company Made In Space, located on the center's campus, developed a high-precision 3D printer capable of manufacturing items in microgravity. The company will soon have a printer installed on the International Space Station, altering the space supply chain. It will print supplies and tools for NASA, as well as nanosatellite shells and other items for public and private entities.

Constitutive Parameter Measurement Using Double Ridge Waveguide

DTIC Science & Technology

2013-03-01

different microwave absorbers. The sample constructed by AFRL is a polymer known commercially as VeroP and was fabricated in a Polyjet 3D printer . The...local 3D printer resources. The acrylic was able to fit similarly to the AFRL sample. The absorber material was formed using laser cut plastic as a...samples. During the sample fabrication process, the 3D printer from Air Force Institute of Technology (AFIT) was used to verify the sample size. The

Micro Autonomous Systems Research: Systems Engineering Processes for Micro-Autonomous Systems

DTIC Science & Technology

2015-09-30

detailed geometry that can be sent directly to an automated manufacturing process like a 3D printer . Like traditional design, 3D CAD files were...force REF is stationed. The REF operates mobile manufacturing labs equipped with 3D printers , laser cutters, and CNC mills. The REF takes the...to verify that the 3d printer was cable of printing airfoil sections with sufficient accuracy and consistency while also providing an airfoil that

Potential usefulness of a video printer for producing secondary images from digitized chest radiographs

NASA Astrophysics Data System (ADS)

Nishikawa, Robert M.; MacMahon, Heber; Doi, Kunio; Bosworth, Eric

1991-05-01

Communication between radiologists and clinicians could be improved if a secondary image (copy of the original image) accompanied the radiologic report. In addition, the number of lost original radiographs could be decreased, since clinicians would have less need to borrow films. The secondary image should be simple and inexpensive to produce, while providing sufficient image quality for verification of the diagnosis. We are investigating the potential usefulness of a video printer for producing copies of radiographs, i.e. images printed on thermal paper. The video printer we examined (Seikosha model VP-3500) can provide 64 shades of gray. It is capable of recording images up to 1,280 pixels by 1,240 lines and can accept any raster-type video signal. The video printer was characterized in terms of its linearity, contrast, latitude, resolution, and noise properties. The quality of video-printer images was also evaluated in an observer study using portable chest radiographs. We found that observers could confirm up to 90 of the reported findings in the thorax using video- printer images, when the original radiographs were of high quality. The number of verified findings was diminished when high spatial resolution was required (e.g. detection of a subtle pneumothorax) or when a low-contrast finding was located in the mediastinal area or below the diaphragm (e.g. nasogastric tubes).

Microfluidic impact printer with interchangeable cartridges for versatile non-contact multiplexed micropatterning

PubMed Central

Ding, Yuzhe; Huang, Eric; Lam, Kit S.; Pan, Tingrui

2015-01-01

Biopatterning has been increasingly used for well-defined cellular microenvironment, patterned surface topology, and guided biological cues; however, it meets additional challenges on biocompatibility, temperature and chemical sensitivity and limited reagent volume. In this paper, we target at combining the desired features from the non-contact inkjet printing and the dot-matrix impact printing to establish a versatile multiplexed micropatterning platform, referred to as Microfluidic Impact Printer (MI-Printer), for emerging biomedical applications. Using this platform, we can achieve the distinct features of no cross-contamination, minute volume manipulation with minimal dead volume, high-throughput and biocompatible printing process, multiplexed patterning with automatic alignment, printing availability for complex medium (cell suspension or colloidal solutions), interchangeable/disposable microfluidic cartridge design with out-of-cleanroom microfabrication, simple printing system assembly and configuration, all highly desirable towards biological applications. Specifically, the printing resolution of the MI-printer platform has been experimentally characterized and theoretically analyzed. Printed droplets with 80µm in diameter have been repeatedly obtained. Furthermore, two unique features of MI-printer platform, multiplexed printing and self-alignment printing, have been successfully experimentally demonstrated (less than 10µm misalignment). In addition, combinatorial patterning and biological patterning, which utilizes the multiplexed and self-alignment printing nature of the MI-printer, have been devised to demonstrate the applicability of this robust printing technique for emerging biomedical applications. PMID:23525299

Rapid patterning of 'tunable' hydrophobic valves on disposable microchips by laser printer lithography.

PubMed

Ouyang, Yiwen; Wang, Shibo; Li, Jingyi; Riehl, Paul S; Begley, Matthew; Landers, James P

2013-05-07

We recently defined a method for fabricating multilayer microdevices using poly(ethylene terephthalate) transparency film and printer toner, and showed these could be successfully applied to DNA extraction and amplification (Duarte et al., Anal. Chem. 2011, 83, 5182-5189). Here, we advance the functionality of these microdevices with flow control enabled by hydrophobic valves patterned using laser printer lithography. Laser printer patterning of toner within the microchannel induces a dramatic change in surface hydrophobicity (change in contact angle of DI water from 51° to 111°) with good reproducibility. Moreover, the hydrophobicity of the surface can be controlled by altering the density of the patterned toner via varying the gray-scale setting on the laser printer, which consequently tunes the valve's burst pressure. Toner density provided a larger burst pressure bandwidth (158 ± 18 Pa to 573 ± 16 Pa) than could be achieved by varying channel geometry (492 ± 18 Pa to 573 ± 16 Pa). Finally, we used a series of tuned toner valves (with varied gray-scale) for passive valve-based fluidic transfer in a predictable manner through the architecture of a rotating PeT microdevice. While an elementary demonstration, this presents the possibility for simplistic and cost-effective microdevices with valved fluid flow control to be fabricated using nothing more than a laser printer, a laser cutter and a laminator.

High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware

NASA Technical Reports Server (NTRS)

Gardner, John M.; Stelter, Christopher J.; Yashin, Edward A.; Siochi, Emilie J.

2016-01-01

Additive manufacturing (or 3D printing) via Fused Filament Fabrication (FFF), also known as Fused Deposition Modeling (FDM), is a process where material is placed in specific locations layer-by-layer to create a complete part. Printers designed for FFF build parts by extruding a thermoplastic filament from a nozzle in a predetermined path. Originally developed for commercial printers, 3D printing via FFF has become accessible to a much larger community of users since the introduction of Reprap printers. These low-cost, desktop machines are typically used to print prototype parts or novelty items. As the adoption of desktop sized 3D printers broadens, there is increased demand for these machines to produce functional parts that can withstand harsher conditions such as high temperature and mechanical loads. Materials meeting these requirements tend to possess better mechanical properties and higher glass transition temperatures (Tg), thus requiring printers with high temperature printing capability. This report outlines the problems and solutions, and includes a detailed description of the machine design, printing parameters, and processes specific to high temperature thermoplastic 3D printing.

NATO Enlargement and Democratic Control of the Armed Forces: The Experience of Poland and Implications for Neighboring "Partnership for Peace" Countries.

DTIC Science & Technology

1998-03-01

borders. You do not follow our suggestions, and we feel threatened...we are 88 See Hannah Arendt , "Reflections on the Hungarian Revolution," Journal of...Press, 1977). Arendt , Hanna, "Reflections on the Hungarian Revolution," Journal of Politics 20.1 (February 1958). Bebler, Anton A., "Postscript" in

Crisis in Adult Learning and Education in the United States--And a Postscript of Hope

ERIC Educational Resources Information Center

Hill, Bob

2012-01-01

We in the U.S. live at the edge of radical possibilities, but few seem to actually see openings available for profound change, or perhaps have become simply too paralyzed to act. After all, the U.S. government in the post 9-11 world has placed "national security" above "liberty" and taken unprecedented measures to monitor citizens'…

Postscript: Problems With the Security Motivation Model Remain Largely Unresolved: Response to Woody and Szechtman (2005)

ERIC Educational Resources Information Center

Taylor, Steven; McKay, Dean; Abramowitz, Jonathan S.

2005-01-01

This paper comments on the response offered by Szechtman and Woody to Taylor et al's initial comments on Szechtman and Woody's original article. Taylor et al highlight one problem with their model that Woody and Szechtman seem to think is unimportant: the treatment relevance of their model. The analogy of aspirin and colds was used, suggesting…

2016 Summer Series - Jason Dunn - The Future of Making Things in Space

NASA Image and Video Library

2016-08-04

Manufacturing of tools is why humans survive. Inkjet printer technology has revolutionized the world of printing anything and led to 3D printers that allow rapid prototyping and manufacturing of tools. Getting materials to space is costly and the ability to manufacture on demand will make space exploration and space utilization more robust and affordable. Jason Dunn will discuss Made In Space’s achievements in bringing 3D printers to the International Space Station and their future role in space exploration.

Impulsive noise of printers: measurement metrics and their subjective correlation

NASA Astrophysics Data System (ADS)

Baird, Terrence; Otto, Norman; Bray, Wade; Stephan, Mike

2005-09-01

In the office and home computing environments, printer impulsive noise has become a significant contributor to user perceived quality or lack thereof, and can affect the user's comfort level and ability to concentrate. Understanding and quantifying meaningful metrics for printer impulsivity is becoming an increasingly important goal for printer manufacturers. Several methods exist in international standards for measuring the impulsivity of noise. For information technology equipment (ITE), the method for detection of impulsive noise is provided in ECMA-74 and ISO 7779. However, there is a general acknowledgement that the current standard method of determining impulsivity by simply measuring A-weighted sound pressure level (SPL) with the impulsive time weighting, I, applied is inadequate to characterize impulsive noise and ultimately to predict user satisfaction and acceptance. In recent years, there has been a variety of new measurement methods evaluated for impulsive noise for both environmental and machinery noise. This paper reviews several of the available metrics, applies the metrics to several printer impulsive noise sources, and makes an initial assessment of their correlation to the subjective impressions of users. It is a review and continuation of the work presented at InterNoise 2005 (Baird, Bray, and Otto).

ADA and C++ Business Case Analysis

DTIC Science & Technology

1991-07-01

executable mini-specs, to support import of existing code. Automated database population/change propagation. 9. Documentation generation: via FrameMaker ...Backplane. ii. 4GLS H-20 I I IDE/Software through Pictures (StP) 12 June 1991 iii. Interleaf and FrameMaker publishing. 13. Output formats: PostScript... FrameMaker , WordPerfect. 12. User interface: Menu and mouse, windowing, color, on-line help, undo. Database browser via forms/tables component later

Surmounting the Effects of Lossy Compression on Steganography

DTIC Science & Technology

1996-10-01

and can be exploited to export sensitive information. Since images are fre- quently compressed for storage or transmission, effective steganography ... steganography is that which is stored with an accuracy far greater than necessary for the data’s use and display. Image , Postscript, and audio files are...information can be concealed in bitmapped image files with little or no visible degradation of the image [4.]. This process, called steganography , is

Geology of Point Reyes National Seashore and vicinity, California: a digital database

USGS Publications Warehouse

Clark, Jospeh C.; Brabb, Earl E.

1997-01-01

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. The report does include, however, a PostScript plot file containing an image of the geologic map sheet with explanation, as well as the accompanying text describing the geology of the area. For those interested in a paper plot of information contained in the database or in obtaining the PostScript plot files, please see the section entitled 'For Those Who Aren't Familiar With Digital Geologic Map Databases' below. This digital map database, compiled from previously published and unpublished data and new mapping by the authors, represents the general distribution of surficial deposits and rock units in Point Reyes and surrounding areas. Together with the accompanying text file (pr-geo.txt or pr-geo.ps), it provides current information on the stratigraphy and structural geology of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:48,000 or smaller.

Observing proposals on the Web at the National Optical Astronomy Observatories

NASA Astrophysics Data System (ADS)

Pilachowski, Catherine A.; Barnes, Jeannette; Bell, David J.

1998-07-01

Proposals for telescope time at facilities available through the National Optical Astronomy Observatories can now be prepared and submitted via the WWW. Investigators submit proposal information through a series of HTML forms to the NOAO server, where the information is processed by Perl CGI scripts. PostScript figures and ASCII files may be attached by investigators for inclusion in their proposals using their browser's upload feature. Proposal information is saved on the server so that investigators can return in later sessions to continue work on a proposal and so that collaborators can participate in writing the proposal if they have access to the proposal account name and password. The system provides on-line verification of LATEX syntax and a spellchecker, and confirms that all sections of the proposal are filled out. Users can request a LATEX or PostScript copy of their proposal by e-mail, or view the proposal on line. The advantages of the Web-based process for our users are convenience, access to on-line documentation, and the simple interface which avoids direct confrontation with LATEX. From the NOAO point of view, the advantage is the use of standardized formats and syntax, particularly as we begin to receive proposals for the Gemini telescopes and some independent observatories.

Geologic map of the San Bernardino North 7.5' quadrangle, San Bernardino County, California

USGS Publications Warehouse

Miller, F.K.; Matti, J.C.

2001-01-01

3. Portable Document Format (.pdf) files of: a. This Readme; includes an Appendix, containing data found in sbnorth_met.txt . b. The Description of Map Units identical to that found on the plot of the PostScript file. c. The same graphic as plotted in 2 above. (Test plots from this .pdf do not produce 1:24,000-scale maps. Use Adobe Acrobat pagesize setting to control map scale.) The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Miscellaneous Investigations Series (I-series) maps. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Even though this is an author-prepared report, every attempt has been made to closely adhere to the stratigraphic nomenclature of the U. S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above). If roads in some areas, especially forest roads that parallel topographic contours, do not show well on plots of the geologic map, we recommend use of the USGS San Bernardino North 7.5’ topographic quadrangle in conjunction with the geologic map.

Hacking for astronomy: can 3D printers and open-hardware enable low-cost sub-/millimeter instrumentation?

NASA Astrophysics Data System (ADS)

Ferkinhoff, Carl

2014-07-01

There have been several exciting developments in the technologies commonly used n in the hardware hacking community. Advances in low cost additive-manufacturing processes (i.e. 3D-printers) and the development of openhardware projects, which have produced inexpensive and easily programmable micro-controllers and micro-computers (i.e. Arduino and Raspberry Pi) have opened a new door for individuals seeking to make their own devices. Here we describe the potential for these technologies to reduce costs in construction and development of submillimeter/millimeter astronomical instrumentation. Specifically we have begun a program to measure the optical properties of the custom plastics used in 3D-printers as well as the printer accuracy and resolution to assess the feasibility of directly printing sub- /millimeter transmissive optics. We will also discuss low cost designs for cryogenic temperature measurement and control utilizing Arduino and Raspberry Pi.

Analysis of laser printer and photocopier toners by spectral properties and chemometrics

NASA Astrophysics Data System (ADS)

Verma, Neha; Kumar, Raj; Sharma, Vishal

2018-05-01

The use of printers to generate falsified documents has become a common practice in today's world. The examination and identification of the printed matter in the suspected documents (civil or criminal cases) may provide important information about the authenticity of the document. In the present study, a total number of 100 black toner samples both from laser printers and photocopiers were examined using diffuse reflectance UV-Vis Spectroscopy. The present research is divided into two parts; visual discrimination and discrimination by using multivariate analysis. A comparison between qualitative and quantitative analysis showed that multivariate analysis (Principal component analysis) provides 99.59%pair-wise discriminating power for laser printer toners while 99.84% pair-wise discriminating power for photocopier toners. The overall results obtained confirm the applicability of UV-Vis spectroscopy and chemometrics, in the nondestructive analysis of toner printed documents while enhancing their evidential value for forensic applications.

Three-dimensional imaging of cultural heritage artifacts with holographic printers

NASA Astrophysics Data System (ADS)

Kang, Hoonjong; Stoykova, Elena; Berberova, Nataliya; Park, Jiyong; Nazarova, Dimana; Park, Joo Sup; Kim, Youngmin; Hong, Sunghee; Ivanov, Branimir; Malinowski, Nikola

2016-01-01

Holography is defined as a two-steps process of capture and reconstruction of the light wavefront scattered from three-dimensional (3D) objects. Capture of the wavefront is possible due to encoding of both amplitude and phase in the hologram as a result of interference of the light beam coming from the object and mutually coherent reference beam. Three-dimensional imaging provided by holography motivates development of digital holographic imaging methods based on computer generation of holograms as a holographic display or a holographic printer. The holographic printing technique relies on combining digital 3D object representation and encoding of the holographic data with recording of analog white light viewable reflection holograms. The paper considers 3D contents generation for a holographic stereogram printer and a wavefront printer as a means of analogue recording of specific artifacts which are complicated objects with regards to conventional analog holography restrictions.

Product management of making large pieces through Rapid Prototyping PolyJet® technology

NASA Astrophysics Data System (ADS)

Belgiu, G.; Cărăuşu, C.; Şerban, D.; Turc, C. G.

2017-08-01

The rapid prototyping process has already become a classic manufacturing process for parts and assemblies, either polymeric or metal parts. Besides the well-known advantages and disadvantages of the process, the use of 3D printers has a great inconvenience: the overall dimensions of the parts are limited. Obviously, there is a possibility to purchase a larger (and more expensive) 3D printer, but there are always larger pieces to be manufactured. One solution to this problem is the splitting of parts into several components that can be manufactured. The component parts can then be assembled in a single piece by known methods such as welding, gluing, screwing, etc. This paper shows our experience in making large pieces on the Strarasys® Objet24 printer, pieces larger than the tray sizes. The results obtained are valid for any 3D printer using the PolyJet® process.

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS... public reference room. Copies of information contained in a filer's on-line tariff database may be...

3D bio-printing technology for body tissues and organs regeneration.

PubMed

Biazar, Esmaeil; Najafi S, Masoumeh; Heidari K, Saeed; Yazdankhah, Meysam; Rafiei, Ataollah; Biazar, Dariush

2018-04-01

In the last decade, the use of new technologies in the reconstruction of body tissues has greatly developed. Utilising stem cell technology, nanotechnology and scaffolding design has created new opportunities in tissue regeneration. The use of accurate engineering design in the creation of scaffolds, including 3D printers, has been widely considered. Three-dimensional printers, especially high precision bio-printers, have opened up a new way in the design of 3D tissue engineering scaffolds. In this article, a review of the latest applications of this technology in this promising area has been addressed.

Joint Force Quarterly. Issue 65, 2nd Quarter 2012

DTIC Science & Technology

2012-04-01

but other times misfortune arrives unan- nounced. Strong organizations build on the mutual support of every member of the unit. This is the essence of...devote themselves to putting themselves into others’ heads. They concen- trate on boring down to a character’s essence , stripping away pretext to...style ‘ jasmine revolution’ circulated on the internet.”17 A postscript on developments in Libya makes clear that economic deprivation is at the

Naval Research Lab Review 1999

DTIC Science & Technology

1999-01-01

Center offers high-quality out- put from computer-generated files in EPS, Postscript, PICT, TIFF, Photoshop , and PowerPoint. Photo- graphic-quality color...767-3200 (228) 688-3390 (831) 656-4731 (410) 257-4000 DSN 297- or 754- 485 878 — Direct- in -Dialing 767- or 404- 688 656 257 Public Affairs (202) 767...research described in this NRL Review can be obtained from the Public Affairs Office, Code 1230, (202) 767-2541. Information concerning Technology

pick_xwell, a program for interactive picking of crosswell seismic and radar data

USGS Publications Warehouse

Ellefsen, K.J.

1999-01-01

travel times can be plotted on the computer screen or printed to a file in postscript format. The program is written in the IDL programming language, and it is executed, in command-line mode, within the IDL program. The IDL program must be run from an X-window terminal that is connected to a computer with the Unix operating system. The data must be in the SU format.

Command Center Library Model Document. Comprehensive Approach to Reusable Defense Software (CARDS)

DTIC Science & Technology

1992-05-31

system, and functionality for specifying the layout of the document. 3.7.16.1 FrameMaker FrameMaker is a Commercial Off The Shelf (COTS) component...facilitating WYSIWYG creation of formatted reports with embedded graphics. FrameMaker is an advanced publishing tool that integrates word processing...available for the component FrameMaker : * Product evaluation reports in ASCII and postscript formats • Product assessment on line in model 0 Product

Availability of Ada and C++ Compilers, Tools, Education and Training

DTIC Science & Technology

1991-07-01

executable mini-specs, to support import of existing code. Automated database population/change propagation. 9. Documentation generation: via FrameMaker . 10...formats. 12. Links to other tools: i. Atherton’s Software Backplane. ii. 4GLS iii. Interleaf and FrameMaker publishing. 13. Output formats: PostScript...by end 󈨟. 11. Output formats: ASCII, PostScript, Interleaf, HPGL, Troff, nroff, FrameMaker , WordPerfect. 12. User interface: Menu and mouse

Recent developments from the OPEnS Lab

NASA Astrophysics Data System (ADS)

Selker, J. S.; Good, S. P.; Higgins, C. W.; Sayde, C.; Buskirk, B.; Lopez, M.; Nelke, M.; Udell, C.

2016-12-01

The Openly Published Environmental Sensing (OPEnS) lab is a facility that is open to all from around the world to use (http://agsci.oregonstate.edu/open-sensing). With 3-D CAD, electronics benches, 3-D printers and laser cutters, and a complete precision metal shop, the lab can build just about anything. Electronic platforms such as the Arduino are combined with cutting edge sensors, and packaged in rugged housing to address critical environmental sensing needs. The results are published in GITHub and in the AGU journal Earth and Space Sciences under the special theme of "Environmental Sensing." In this poster we present advancements including: A ultra-precise isotopic sampler for rainfall; an isotopic sampler for soil gas; a data-logging wind vane that can be mounted on the tether of a balloon; a rain-gage calibrator with three rates of constant application; a <$20 dissolved O2 probe for water; a stream-bed permeameter that gives rapid quantification of permeability. You can use the OPEnS lab! Just sketch your idea on a white board and send it in. The conversation is started, and your prototype can be ready in a few weeks. We have a staff of three engineers ready to help, where you are working remotely, or decide to spend some time with the team in Corvallis.

3D Printing: What Are the Hazards?

PubMed

Randolph, Susan A

2018-03-01

As the popularity of three-dimensional (3D) printers increases, more research will be conducted to evaluate the benefits and risks of this technology. Occupational health professionals should stay abreast of new recommendations to protect workers from exposure to 3D printer emissions.

102. VIEW OF GRANETZ 'EVENTRECORDER' COMPUTER AND GENERAL ELECTRIC PRINTERS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

102. VIEW OF GRANETZ 'EVENT-RECORDER' COMPUTER AND GENERAL ELECTRIC PRINTERS FOR GRANETZ OUTPUT LOCATED NEAR EAST WALL OF LANDLINE INSTRUMENTATION ROOM - Vandenberg Air Force Base, Space Launch Complex 3, Launch Operations Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

3D Printers Can Provide an Added Dimension for Teaching Structure-Energy Relationships

ERIC Educational Resources Information Center

Blauch, David N.; Carroll, Felix A.

2014-01-01

A 3D printer is used to prepare a variety of models representing potential energy as a function of two geometric coordinates. These models facilitate the teaching of structure-energy relationships in molecular conformations and in chemical reactions.

Impact of SMS/GPRS Printers in Reducing Time to Early Infant Diagnosis Compared With Routine Result Reporting: A Systematic Review and Meta-Analysis

PubMed Central

Markby, Jessica; Boeke, Caroline; Penazzato, Martina; Urick, Brittany; Ghadrshenas, Anisa; Harris, Lindsay; Ford, Nathan; Peter, Trevor

2017-01-01

Background: Despite significant gains made toward improving access, early infant diagnosis (EID) testing programs suffer from long test turnaround times that result in substantial loss to follow-up and mortality associated with delays in antiretroviral therapy initiation. These delays in treatment initiation are particularly impactful because of significant HIV-related infant mortality observed by 2–3 months of age. Short message service (SMS) and general packet radio service (GPRS) printers allow test results to be transmitted immediately to health care facilities on completion of testing in the laboratory. Methods: We conducted a systematic review and meta-analysis to assess the benefit of using SMS/GPRS printers to increase the efficiency of EID test result delivery compared with traditional courier paper–based results delivery methods. Results: We identified 11 studies contributing data for over 16,000 patients from East and Southern Africa. The test turnaround time from specimen collection to result received at the health care facility with courier paper–based methods was 68.0 days (n = 6835), whereas the test turnaround time with SMS/GPRS printers was 51.1 days (n = 6711), resulting in a 2.5-week (25%) reduction in the turnaround time. Conclusions: Courier paper–based EID test result delivery methods are estimated to add 2.5 weeks to EID test turnaround times in low resource settings and increase the risk that infants receive test results during or after the early peak of infant mortality. SMS/GPRS result delivery to health care facility printers significantly reduced test turnaround time and may reduce this risk. SMS/GPRS printers should be considered for expedited delivery of EID and other centralized laboratory test results. PMID:28825941

Accuracy and repeatability of long-bone replicas of small animals fabricated by use of low-end and high-end commercial three-dimensional printers.

PubMed

Cone, Jamie A; Martin, Thomas M; Marcellin-Little, Denis J; Harrysson, Ola L A; Griffith, Emily H

2017-08-01

OBJECTIVE To assess the repeatability and accuracy of polymer replicas of small, medium, and large long bones of small animals fabricated by use of 2 low-end and 2 high-end 3-D printers. SAMPLE Polymer replicas of a cat femur, dog radius, and dog tibia were fabricated in triplicate by use of each of four 3-D printing methods. PROCEDURES 3-D renderings of the 3 bones reconstructed from CT images were prepared, and length, width of the proximal aspect, and width of the distal aspect of each CT image were measured in triplicate. Polymer replicas were fabricated by use of a high-end system that relied on jetting of curable liquid photopolymer, a high-end system that relied on polymer extrusion, a triple-nozzle polymer extrusion low-end system, and a dual-nozzle polymer extrusion low-end system. Polymer replicas were scanned by use of a laser-based coordinate measurement machine. Length, width of the proximal aspect, and width of the distal aspect of the scans of replicas were measured and compared with measurements for the 3-D renderings. RESULTS 129 measurements were collected for 34 replicas (fabrication of 1 large long-bone replica was unsuccessful on each of the 2 low-end printers). Replicas were highly repeatable for all 3-D printers. The 3-D printers overestimated dimensions of large replicas by approximately 1%. CONCLUSIONS AND CLINICAL RELEVANCE Low-end and high-end 3-D printers fabricated CT-derived replicas of bones of small animals with high repeatability. Replicas were slightly larger than the original bones.

Maskless lithography using off-the-shelf inkjet printer

NASA Astrophysics Data System (ADS)

Seng, Leo Cheng; Chollet, Franck

2006-12-01

Photolithography is the most important process used to pattern the surface of silicon wafers in IC fabrication. It has shown high performance but its use is not cost-effective for small series or prototyping as it necessitates a costly infrastructure (mask aligner) and requires the fabrication of masks which can be expensive and timeconsuming. Recently, the high resolution achieved by ink-jet printer (> 1200 DPI) starts to make an interesting alternative to obtain a patterned protective layer instead of using photolithography. This is particularly true for MEMS which often need a resolution of only 10 to 20 μm. After studying the different architecture of inkjet printer available in the market, a commercial S$100-printer was selected and modified to allow printing on a rigid silicon wafer. We then developed three different patterning processes using the printer. In a first process the ink was directly used as a protective layer for patterning. A second process modified the photolithography by using the printed ink as a photo-mask on a spun layer of photoresist. In each case we had to modify the surface energy of the wafer by surface treatment to improve the resolution. Finally we replaced the ink with a modified photoresist solution and directly printed a protective mask onto the wafer. Design of Experiment (DOE) methods were systematically employed to study the main and interaction effects of the parameters on the lithography and on the pattern transfer. The series of experiment showed that off-the-shelf ink-jet printer could be used easily for pattern with a resolution below 50 μm, but could not yet reach the 20 μm range.

DEMONSTRATION OF WATERBASED PLATEN ADHESIVES FOR GARMENT SCREEN PRINTERS

EPA Science Inventory

The paper discusses a demonstration of waterbased platen adhesives as a viable alternative to the organic-based aerosol adhesives that are predominantly used by garment screen printers to affix garments or fabric pieces to print platens. o demonstrate this, the effectiveness of s...

The Printer's Colophon in Sung China, 960-1279

ERIC Educational Resources Information Center

Poon, Ming-sun

1973-01-01

Early Chinese printer's colophons are rich in information useful to researchers tracing the development of Chinese printing in its early stages. Regional and chronological patterns exhibited by 30 sample colophons from the Sung dynasty period are described and their implications discussed. (12 references) (Author/KE)

Infrared imaging of the polymer 3D-printing process

NASA Astrophysics Data System (ADS)

Dinwiddie, Ralph B.; Kunc, Vlastimil; Lindal, John M.; Post, Brian; Smith, Rachel J.; Love, Lonnie; Duty, Chad E.

2014-05-01

Both mid-wave and long-wave IR cameras are used to measure various temperature profiles in thermoplastic parts as they are printed. Two significantly different 3D-printers are used in this study. The first is a small scale commercially available Solidoodle 3 printer, which prints parts with layer thicknesses on the order of 125μm. The second printer used is a "Big Area Additive Manufacturing" (BAAM) 3D-printer developed at Oak Ridge National Laboratory. The BAAM prints parts with a layer thicknesses of 4.06 mm. Of particular interest is the temperature of the previously deposited layer as the new hot layer is about to be extruded onto it. The two layers are expected have a stronger bond if the temperature of the substrate layer is above the glass transition temperature. This paper describes the measurement technique and results for a study of temperature decay and substrate layer temperature for ABS thermoplastic with and without the addition of chopped carbon fibers.

Estimation of repetitive interval of periodic bands in laser electrophotographic printer output

NASA Astrophysics Data System (ADS)

Zhang, Jia; Allebach, Jan P.

2015-01-01

In the printing industry, electrophotography (EP) is a commonly used technology in laser printers and copiers. In the EP printing process, there are many rotating components involved in the six major steps: charging, exposure, development, transfer, fusing, and cleaning. If there is any irregularity in one of the rotating components, repetitive defects, such as isolated bands or spots, will occur on the output of the printer or copier. To troubleshoot these types of repetitive defect issues, the repeating interval of these isolated bands or spots is an important clue to locate the irregular rotating component. In our previous work, we have effectively identified the presence of isolated large pitch bands in the output from EP printers. In this paper, we describe an algorithm to estimate the repetitive interval of periodic bands, when the data is corrupted by the presence of aperiodic bands, missing periodic bands, and noise. We will also illustrate the effectiveness and robustness of our method with example results.

Development of low-cost open source 3D gel printer "RepRap SWIM-ER"

NASA Astrophysics Data System (ADS)

Sato, Kei; Basher, Samiul; Ota, Takafumi; Tase, Taishi; Takamatsu, Kyuichiro; Saito, Azusa; Khosla, Ajit; Kawakami, Masaru; Furuawa, Hidemitsu

2017-04-01

Gels are soft and wet materials having low friction, good biocompatibility, and material permeability. It is expected that gel materials will be used as new kinds of industrial materials in the engineering and medical applications. But it cannot build a complicated shape. Soft & Wet Matter Engineering Laboratory developed a 3D gel Printer "SWIM-ER", has enabled modeling of complex shapes of the gel. However, this is expensive. Therefore not all of the gel researchers and the companies have such a device. To solve this problem, we manufacture a low-cost open-source 3D gel printer "RepRap SWIM-ER" from the RepRap. We made the components required to manufacture the "RepRap SWIM-ER" from the 3D printer and chose a light source. In addition, we produced the P-DN gel for RepRap SWIM-ER and conducted the molding test to confirm whether RepRap SWIM-ER can used it.

WE-F-16A-02: Design, Fabrication, and Validation of a 3D-Printed Proton Filter for Range Spreading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Remmes, N; Courneyea, L; Corner, S

2014-06-15

Purpose: To design, fabricate and test a 3D-printed filter for proton range spreading in scanned proton beams. The narrow Bragg peak in lower-energy synchrotron-based scanned proton beams can result in longer treatment times for shallow targets due to energy switching time and plan quality degradation due to minimum monitor unit limitations. A filter with variable thicknesses patterned on the same scale as the beam's lateral spot size will widen the Bragg peak. Methods: The filter consists of pyramids dimensioned to have a Gaussian distribution in thickness. The pyramids are 2.5mm wide at the base, 0.6 mm wide at the peak,more » 5mm tall, and are repeated in a 2.5mm pseudo-hexagonal lattice. Monte Carlo simulations of the filter in a proton beam were run using TOPAS to assess the change in depth profiles and lateral beam profiles. The prototypes were constrained to a 2.5cm diameter disk to allow for micro-CT imaging of promising prototypes. Three different 3D printers were tested. Depth-doses with and without the prototype filter were then measured in a ~70MeV proton beam using a multilayer ion chamber. Results: The simulation results were consistent with design expectations. Prototypes printed on one printer were clearly unacceptable on visual inspection. Prototypes on a second printer looked acceptable, but the micro-CT image showed unacceptable voids within the pyramids. Prototypes from the third printer appeared acceptable visually and on micro-CT imaging. Depth dose scans using the prototype from the third printer were consistent with simulation results. Bragg peak width increased by about 3x. Conclusions: A prototype 3D printer pyramid filter for range spreading was successfully designed, fabricated and tested. The filter has greater design flexibility and lower prototyping and production costs compared to traditional ridge filters. Printer and material selection played a large role in the successful development of the filter.« less

The Generic Mapping Tools 6: Classic versus Modern Mode

NASA Astrophysics Data System (ADS)

Wessel, P.; Uieda, L.; Luis, J. M. F.; Scharroo, R.; Smith, W. H. F.; Wobbe, F.

2017-12-01

The Generic Mapping Tools (GMT; gmt.soest.hawaii.edu) is a 25-year old, mature open-source software package for the analysis and display of geoscience data (e.g., interpolate, filter, manipulate, project and plot temporal and spatial data). The GMT "toolbox" includes about 80 core and 40 supplemental modules sharing a common set of command options, file structures, and documentation. GMT5, when released in 2013, introduced an application programming interface (API) to allow programmatic access to GMT from other computing environments. Since then, we have released a GMT/MATLAB toolbox, an experimental GMT/Julia package, and will soon introduce a GMT/Python module. In developing these extensions, we wanted to simplify the GMT learning curve but quickly realized the main stumbling blocks to GMT command-line mastery would be ported to the external environments unless we introduced major changes. With thousands of GMT scripts already in use by scientists around the world, we were acutely aware of the need for backwards compatibility. Our solution, to be released as GMT 6, was to add a modern run mode that complements the classic mode offered so far. Modern mode completely eliminates the top three obstacles for new (and not so new) GMT users: (1) The responsibility to properly stack PostScript layers manually (i.e., the -O -K dance), (2) the responsibility of handling output redirection of PostScript (create versus append), and (3) the need to provide commands with repeated information about regions (-R) and projections (-J). Thus, modern mode results in shorter, simpler scripts with fewer pitfalls, without interfering with classic scripts. Our implementation adds five new commands that begin and end a modern session, simplify figure management, automate the conversion of PostScript to more suitable formats, automate region detection, and offer a new automated subplot environment for multi-panel illustrations. Here, we highlight the GMT modern mode and the simplifications it offers, both for command-line use and in external environments. GMT 6 is in beta mode but accessible from our repository. Numerous improvements have been added in addition to modern mode; we expect a formal release in early 2018. Publication partially supported by FCT project UID/GEO/50019/2013 - Instituto D. Luiz.

Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique.

PubMed

Lin, Wei-Shao; Harris, Bryan T; Pellerito, John; Morton, Dean

2018-04-30

This report describes a proof of concept for fabricating an interim complete removable dental prosthesis with a digital light processing 3-dimensional (3D) printer. Although an in-office 3D printer can reduce the overall production cost for an interim complete removable dental prosthesis, the process has not been validated with clinical studies. This report provided a preliminary proof of concept in developing a digital workflow for the in-office additively manufactured interim complete removable dental prosthesis. Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

77 FR 4006 - Foreign-Trade Zone 45-Portland, Oregon; Expansion of Manufacturing Authority; Epson Portland, Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-26

..., Oregon; Expansion of Manufacturing Authority; Epson Portland, Inc. (Inkjet Ink Manufacturing); Portland... manufacturing (injection molding, assembly, finishing), warehousing and distribution of inkjet printer cartridges. The current request involves the production of ink for inkjet printer cartridges using foreign...

INK AND CLEANER WASTE REDUCTION EVALUATION FOR FLEXOGRAPHIC PRINTERS

EPA Science Inventory

This report describes the technical and economic effects incurred by a flexographic label printer who changed the type of ink and cleaning agent used in its print shop. The changes were incurred as the best way to eliminate all hazardous materials. The company's corporate managem...

Health-hazard evaluation report HETA 91-158-2161, Immaculate Heart of Mary Church, Cincinnati, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, C.K.

1991-11-01

In response to a request from a representative of the Immaculate Heart of Mary Church (SIC-8661), an investigation was made of indoor air quality in the church office. Particular attention was directed toward laser printer and photocopier emissions. Employees had complained of headaches, dizziness, confusion, nausea, eye irritation, and dry nose and throat. Day shift employees performed general office duties, often using a photocopier and a laser printer. Real time ozone (10028156) concentrations ranged from below the limit of detection (LOD) to 0.05 parts per million (ppm) in the breathing zone, all below the NIOSH limit for short term exposuremore » of 0.10ppm. Ozone concentrations as high as 0.56ppm were detected at the laser printer exhaust. Carbon-dioxide (124389) concentrations ranged from 400 to 850ppm. Respirable dust concentrations ranged from below the LOD to 90 micrograms per cubic meter. Carbon-monoxide (630080) levels were not above the LOD of 5ppm. No volatile organic carbons were detected. Temperature and relative humidity levels were within the guidelines. Some of the symptoms were consistent with ozone exposure. The author concludes that efforts should be made to reduce ozone exposures. The author recommends relocating the laser printer, providing additional outside air to the building, and checking for possible overloading or inefficiency in the ozone filter in the printer.« less

In-body tissue-engineered aortic valve (Biovalve type VII) architecture based on 3D printer molding.

PubMed

Nakayama, Yasuhide; Takewa, Yoshiaki; Sumikura, Hirohito; Yamanami, Masashi; Matsui, Yuichi; Oie, Tomonori; Kishimoto, Yuichiro; Arakawa, Mamoru; Ohmuma, Kentaro; Tajikawa, Tsutomu; Kanda, Keiichi; Tatsumi, Eisuke

2015-01-01

In-body tissue architecture--a novel and practical regeneration medicine technology--can be used to prepare a completely autologous heart valve, based on the shape of a mold. In this study, a three-dimensional (3D) printer was used to produce the molds. A 3D printer can easily reproduce the 3D-shape and size of native heart valves within several processing hours. For a tri-leaflet, valved conduit with a sinus of Valsalva (Biovalve type VII), the mold was assembled using two conduit parts and three sinus parts produced by the 3D printer. Biovalves were generated from completely autologous connective tissue, containing collagen and fibroblasts, within 2 months following the subcutaneous embedding of the molds (success rate, 27/30). In vitro evaluation, using a pulsatile circulation circuit, showed excellent valvular function with a durability of at least 10 days. Interposed between two expanded polytetrafluoroethylene grafts, the Biovalves (N = 3) were implanted in goats through an apico-aortic bypass procedure. Postoperative echocardiography showed smooth movement of the leaflets with minimal regurgitation under systemic circulation. After 1 month of implantation, smooth white leaflets were observed with minimal thrombus formation. Functional, autologous, 3D-shaped heart valves with clinical application potential were formed following in-body embedding of specially designed molds that were created within several hours by 3D printer. © 2014 Wiley Periodicals, Inc.

Aerosol Emissions from Fuse-Deposition Modeling 3D Printers in a Chamber and in Real Indoor Environments.

PubMed

Vance, Marina E; Pegues, Valerie; Van Montfrans, Schuyler; Leng, Weinan; Marr, Linsey C

2017-09-05

Three-dimensional (3D) printers are known to emit aerosols, but questions remain about their composition and the fundamental processes driving emissions. The objective of this work was to characterize the aerosol emissions from the operation of a fuse-deposition modeling 3D printer. We modeled the time- and size-resolved emissions of submicrometer aerosols from the printer in a chamber study, gained insight into the chemical composition of emitted aerosols using Raman spectroscopy, and measured the potential for exposure to the aerosols generated by 3D printers under real-use conditions in a variety of indoor environments. The average aerosol emission rates ranged from ∼10 8 to ∼10 11 particles min -1 , and the rates varied over the course of a print job. Acrylonitrile butadiene styrene (ABS) filaments generated the largest number of aerosols, and wood-infused polylactic acid (PLA) filaments generated the smallest amount. The emission factors ranged from 6 × 10 8 to 6 × 10 11 per gram of printed part, depending on the type of filament used. For ABS, the Raman spectra of the filament and the printed part were indistinguishable, while the aerosol spectra lacked important peaks corresponding to styrene and acrylonitrile, which are both present in ABS. This observation suggests that aerosols are not a result of volatilization and subsequent nucleation of ABS or direct release of ABS aerosols.

Experimental Validation of Plastic Mandible Models Produced by a "Low-Cost" 3-Dimensional Fused Deposition Modeling Printer.

PubMed

Maschio, Federico; Pandya, Mirali; Olszewski, Raphael

2016-03-22

The objective of this study was to investigate the accuracy of 3-dimensional (3D) plastic (ABS) models generated using a low-cost 3D fused deposition modelling printer. Two human dry mandibles were scanned with a cone beam computed tomography (CBCT) Accuitomo device. Preprocessing consisted of 3D reconstruction with Maxilim software and STL file repair with Netfabb software. Then, the data were used to print 2 plastic replicas with a low-cost 3D fused deposition modeling printer (Up plus 2®). Two independent observers performed the identification of 26 anatomic landmarks on the 4 mandibles (2 dry and 2 replicas) with a 3D measuring arm. Each observer repeated the identifications 20 times. The comparison between the dry and plastic mandibles was based on 13 distances: 8 distances less than 12 mm and 5 distances greater than 12 mm. The mean absolute difference (MAD) was 0.37 mm, and the mean dimensional error (MDE) was 3.76%. The MDE decreased to 0.93% for distances greater than 12 mm. Plastic models generated using the low-cost 3D printer UPplus2® provide dimensional accuracies comparable to other well-established rapid prototyping technologies. Validated low-cost 3D printers could represent a step toward the better accessibility of rapid prototyping technologies in the medical field.

Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments.

PubMed

Azimi, Parham; Zhao, Dan; Pouzet, Claire; Crain, Neil E; Stephens, Brent

2016-02-02

Previous research has shown that desktop 3D printers can emit large numbers of ultrafine particles (UFPs, particles less than 100 nm) and some hazardous volatile organic compounds (VOCs) during printing, although very few filament and 3D printer combinations have been tested to date. Here we quantify emissions of UFPs and speciated VOCs from five commercially available filament extrusion desktop 3D printers utilizing up to nine different filaments by controlled experiments in a test chamber. Median estimates of time-varying UFP emission rates ranged from ∼10(8) to ∼10(11) min(-1) across all tested combinations, varying primarily by filament material and, to a lesser extent, bed temperature. The individual VOCs emitted in the largest quantities included caprolactam from nylon-based and imitation wood and brick filaments (ranging from ∼2 to ∼180 μg/min), styrene from acrylonitrile butadiene styrene (ABS) and high-impact polystyrene (HIPS) filaments (ranging from ∼10 to ∼110 μg/min), and lactide from polylactic acid (PLA) filaments (ranging from ∼4 to ∼5 μg/min). Results from a screening analysis of potential exposure to these products in a typical small office environment suggest caution should be used when operating many of the printer and filament combinations in poorly ventilated spaces or without the aid of combined gas and particle filtration systems.

Experimental Validation of Plastic Mandible Models Produced by a “Low-Cost” 3-Dimensional Fused Deposition Modeling Printer

PubMed Central

Maschio, Federico; Pandya, Mirali; Olszewski, Raphael

2016-01-01

Background The objective of this study was to investigate the accuracy of 3-dimensional (3D) plastic (ABS) models generated using a low-cost 3D fused deposition modelling printer. Material/Methods Two human dry mandibles were scanned with a cone beam computed tomography (CBCT) Accuitomo device. Preprocessing consisted of 3D reconstruction with Maxilim software and STL file repair with Netfabb software. Then, the data were used to print 2 plastic replicas with a low-cost 3D fused deposition modeling printer (Up plus 2®). Two independent observers performed the identification of 26 anatomic landmarks on the 4 mandibles (2 dry and 2 replicas) with a 3D measuring arm. Each observer repeated the identifications 20 times. The comparison between the dry and plastic mandibles was based on 13 distances: 8 distances less than 12 mm and 5 distances greater than 12 mm. Results The mean absolute difference (MAD) was 0.37 mm, and the mean dimensional error (MDE) was 3.76%. The MDE decreased to 0.93% for distances greater than 12 mm. Conclusions Plastic models generated using the low-cost 3D printer UPplus2® provide dimensional accuracies comparable to other well-established rapid prototyping technologies. Validated low-cost 3D printers could represent a step toward the better accessibility of rapid prototyping technologies in the medical field. PMID:27003456

National Computer Security Conference Proceedings (11th): A Postscript: Computer Security--Into the Future, 17-20 October 1988

DTIC Science & Technology

1988-10-20

The LOCK project , from its very beginnings as an implementation study for the Provably Secure Operating System in 1979...to the security field, can study to gain insight into the evaluation process. The project has developed an innovative format for the DTLS and FTLS...management tern becomes available, the Al Secure DBMS will be system (DBMS) that is currently being developed un- ported to it . der the Advanced

Embedding Fonts in MetaPost Output

DTIC Science & Technology

2016-04-19

by John Hobby ) based on Donald Knuth’s META- FONT [4] with high quality PostScript output. An outstanding feature of MetaPost is that typeset fonts in...output, the graphics are perfectly scalable to any arbitrary res- olution. John Hobby , its author, writes: “[MetaPost] is really a programming lan- guage...for generating graphics, especially fig- ures for TEX [5] and troff documents.” This quote by Hobby indicates that MetaPost figures are not only

Computer Programs to Display and Modify Data in Geographic Coordinates and Methods to Transfer Positions to and from Maps, with Applications to Gravity Data Processing, Global Positioning Systems, and 30-Meter Digital Elevation Models

USGS Publications Warehouse

Plouff, Donald

1998-01-01

Computer programs were written in the Fortran language to process and display gravity data with locations expressed in geographic coordinates. The programs and associated processes have been tested for gravity data in an area of about 125,000 square kilometers in northwest Nevada, southeast Oregon, and northeast California. This report discusses the geographic aspects of data processing. Utilization of the programs begins with application of a template (printed in PostScript format) to transfer locations obtained with Global Positioning Systems to and from field maps and includes a 5-digit geographic-based map naming convention for field maps. Computer programs, with source codes that can be copied, are used to display data values (printed in PostScript format) and data coverage, insert data into files, extract data from files, shift locations, test for redundancy, and organize data by map quadrangles. It is suggested that 30-meter Digital Elevation Models needed for gravity terrain corrections and other applications should be accessed in a file search by using the USGS 7.5-minute map name as a file name, for example, file '40117_B8.DEM' contains elevation data for the map with a southeast corner at lat 40? 07' 30' N. and lon 117? 52' 30' W.

Quaternary Geology and Liquefaction Susceptibility, San Francisco, California 1:100,000 Quadrangle: A Digital Database

USGS Publications Warehouse

Knudsen, Keith L.; Noller, Jay S.; Sowers, Janet M.; Lettis, William R.

1997-01-01

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There are no paper maps included in the Open-File report. The report does include, however, PostScript plot files containing the images of the geologic map sheets with explanations, as well as the accompanying text describing the geology of the area. For those interested in a paper plot of information contained in the database or in obtaining the PostScript plot files, please see the section entitled 'For Those Who Aren't Familiar With Digital Geologic Map Databases' below. This digital map database, compiled from previously unpublished data, and new mapping by the authors, represents the general distribution of surficial deposits in the San Francisco bay region. Together with the accompanying text file (sf_geo.txt or sf_geo.pdf), it provides current information on Quaternary geology and liquefaction susceptibility of the San Francisco, California, 1:100,000 quadrangle. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:100,000 or smaller. The content and character of the database, as well as three methods of obtaining the database, are described below.

Modeling for Standoff Surface Detection

DTIC Science & Technology

2013-11-01

Height and Volume of a Droplet ..............................................37 9. INKJET PRINTING OF DROPLET DISTRIBUTION...38 9.1 Inkjet Printing of SF96-5 on Teflon Material ..................................................38 9.2 VLSTRACK Witness Card...modeled droplet distribution on relevant surfaces with actual chemicals. This unique printer is a flatbed inkjet printer that can be used to deposit

Design Considerations for an OPAC Workstation: An Introduction to Specifications and a Model Configuration.

ERIC Educational Resources Information Center

Martin, Ron G.

1989-01-01

Describes guidelines for an online public access catalog (OPAC) workstation that will support the terminal, printer, and other peripherals. Workstation dimensions, lighting, wire management, printer and paper, acoustical treatment, seating, storage for books and coats, wastebasket, and interior decoration are addressed. Flexibility and simplicity…

Implementation of the Hong Kong Language Policy in Pre-School Settings

ERIC Educational Resources Information Center

Leung, Cheung-Shing Sam; Lim, Swee Eng Audrey; Li, Yuen Ling

2013-01-01

In the past, the Curriculum Development Council in Hong Kong [Curriculum Development Council (CDC). (1996). "Guide to the Pre-Primary Curriculum." Hong Kong: Government Printer; CDC. (2000). "Consultation Document: Learning to Learn: The Way Forward in Curriculum Development." Hong Kong: Government Printer; CDC. (2001).…

MFPs: A Bundle of Possibilities

ERIC Educational Resources Information Center

Waters, John K.

2007-01-01

This article describes how the new generation of multifunction printers (MFP) couple diverse software with powerful hardware, bringing a multitude of options to educators. All of the major printer-scanner-copier makers have the education market in their crosshairs, but Lexmark's new Education Station targets K-12 with a unique combination of…

Interoperability between loose-coupled distributed resources and application across autonomous systems

NASA Astrophysics Data System (ADS)

Arrott, M.; Orcutt, J.; Chave, A.

2005-12-01

The following is an example to illustrate the concept, possibilities and issues associated with the interoperability between loose-coupled distributed resources and application across autonomous systems. Take, for example, printing. If you are in your office (or home office) environment, it is likely that you select "Print" in your application, select a printer from the list of printers offered those "loaded" onto your computer, and your computer communicates directly with the selected printer to produce a paper copy of your document. If you are sitting in a coffee shop, however, selecting the same printer likely produces no immediate results. Imagine if, in contrast to the scenario just outlined, your selection of the "Print" command produced a list of printers available at nearby copy service shops (e.g., Ali's Copy & Print), public libraries and "friends you forgot you had." This list might include information regarding how far the printer is from your current location and how much you would be charged to print your document on it. Deciding that you'll gladly pay .30 cents to save a half mile walk, you select Ali's Copy & Print. Your system authorizes payment, Ali's Copy & Print authorizes service, and your document appears on Ali's printer, ready for pickup. This latter scenario requires the introduction of a layer of negotiation between producers and consumers of network services that is not available today. Rather than a resource consumer (your application) seeking to connect to a specific resource (your printer), a resource consumer presents a request for service which one or more producers offer to fill. The beginning and the end of the transaction remain unchanged: you select the print command and the system presents potential printers, and, eventually, your system presents a command to a printer: however, an intermediate negotiation takes place to determine the when, where who and how. The implication of this model is that, fundamentally, networks must shift from being collections of known resources to being confederated communities of potential resources. In other words, producers must be able to advertise their services, consumers must be able to present their needs, and the two must be able to reach an agreement on services rendered and payments received. Creating a confederated community of potential resources poses three basic technical challenges. First, collaborating parties in a service must be able to describe, identify and communicate themselves in manner that is mutually understandable. Second, parties must be able to establish trust that each are legitimate; potentially requiring mutually trusted third party verification. Third, parties must be able to govern negotiations and agreements in which they participate. This presentation addresses these three challenges in manner that provides a durable set of solutions, by investigate the following questions in the context of a loose-coupled distributed environment between autonomous systems: 1. Characterize the domain of the relationship between the resources offered by one autonomous system and the utilization of those resource by applications used in another autonomous system? 2. What models of interactions can be employed to support the domain of relationship? 3. What are the metrics for evaluating these relationships? 4. What changes the nature of the relationship between the resource and the application?

White House Maker Faire

NASA Image and Video Library

2014-06-18

The Made In Space company displays some of the tools that can be made by their 3D printer during the first ever White House Maker Faire which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The Made In Space 3D printer was just approved by NASA to be tested onboard the International Space Station (ISS), and NASA announced a challenge for students to design items that would be printed by this first 3D printer to fly in space. Photo Credit: (NASA/Bill Ingalls)

White House Maker Faire

NASA Image and Video Library

2014-06-18

A prototype model of the Made In Space 3D printer is on display during the first ever White House Maker Faire which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The Made In Space 3D printer was just approved by NASA to be tested onboard the International Space Station (ISS), and NASA announced a challenge for students to design items that would be printed by this first 3D printer to fly in space. Photo Credit: (NASA/Bill Ingalls)

3D Printing Demo - Autodesk

NASA Image and Video Library

2018-03-16

Researchers demonstrate a Zero Launch Mass 3-D printer in Swamp Works at NASA's Kennedy Space Center in Florida. The printer can be used for construction projects on the Moon and Mars. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers. This will prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The Kennedy team is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

Three-Dimensional Printing Using a Photoinitiated Polymer

ERIC Educational Resources Information Center

Muskin, Joseph; Ragusa, Matthew; Gelsthorpe, Thomas

2010-01-01

Printers capable of producing three-dimensional objects are becoming more common. Most of these printers are impractical for use in the chemistry classroom because of the expense incurred in fabricating a print head that must be controlled in three dimensions. We propose a simpler solution to this problem that allows the emerging technology of…

The Layman Printer. Communication Manual.

ERIC Educational Resources Information Center

Barton, Frank; Lehrke, Gunter

Intended for those responsible for all kinds of publications in developing countries, this booklet has three main objectives: (1) to give the ordinary person who knows nothing about printing or printing processes enough information to be able to deal intelligently with a printer, (2) to show how it is possible for a person or group of persons with…

Dumping Low and High Resolution Graphics on the Apple IIe Microcomputer System.

ERIC Educational Resources Information Center

Fletcher, Richard K., Jr.; Ruckman, Frank, Jr.

This paper discusses and outlines procedures for obtaining a hard copy of the graphic output of a microcomputer or "dumping a graphic" using the Apple Dot Matrix Printer with the Apple Parallel Interface Card, and the Imagewriter Printer with the Apple Super Serial Interface Card. Hardware configurations and instructions for high…

The Efficacy of Multidimensional Line-Printer Graphics for Cluster Recovery.

ERIC Educational Resources Information Center

Brown, R. L.

The plotting of multivariate data using computer line-printers has become a popular means of quickly representing multidimensional data. While many plotting programs are available, there is a paucity of research regarding the validity and reliability of interpretations made by viewing such graphics. This study explores the validity of four…

Demystifying the Halftoning Process: Conventional, Stochastic, and Hybrid Halftone Dot Structures

ERIC Educational Resources Information Center

Oliver, Garth R.; Waite, Jerry J.

2006-01-01

For more than 150 years, printers have been faithfully reproducing continuous tone originals using halftoning techniques. For about 120 years, printers could only use the AM halftoning technique invented by Henry Talbot. In recent years, the advent of powerful raster image processors and high-resolution output devices has increased the variety of…

1970 Supplement to the Guide to Microreproduction Equipment.

ERIC Educational Resources Information Center

Ballou, Hubbard W., Ed.

The time period covered by this guide runs from the end of 1968 to the middle of 1970. Microreproduction cameras, microform readers, reader/printers, processors, contact printers, computer output microfilm equipment, and other special microform equipment and accessories produced during this time span are listed. Most of the equipment is domestic,…

The Effect of Technology on Alienation from Work. Testing Blauner's Inverted U-Curve Hypothesis for 110 Industrial Organizations and 245 Retrained Printers.

ERIC Educational Resources Information Center

Hull, Frank M.; And Others

1982-01-01

Presents new evidence on the effect of technology on worker alienation, using data from the organizational level as well as the individual level. In the latter approach, the impact of automation on the work of newspaper printers is examined. (SK)

XMGR5 users manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, K.R.; Fisher, J.E.

1997-03-01

ACE/gr is XY plotting tool for workstations or X-terminals using X. A few of its features are: User defined scaling, tick marks, labels, symbols, line styles, colors. Batch mode for unattended plotting. Read and write parameters used during a session. Polynomial regression, splines, running averages, DFT/FFT, cross/auto-correlation. Hardcopy support for PostScript, HP-GL, and FrameMaker.mif format. While ACE/gr has a convenient point-and-click interface, most parameter settings and operations are available through a command line interface (found in Files/Commands).

GRBase, a new gene regulation data base available by anonymous ftp.

PubMed Central

Collier, B; Danielsen, M

1994-01-01

The Gene Regulation Database (GRBase) is a compendium of information on the structure and function of proteins involved in the control of gene expression in eukaryotes. These proteins include transcription factors, proteins involved in signal transduction, and receptors. The database can be obtained by FTP in Filemaker Pro, text, and postscript formats. The database will be expanded in the coming year to include reviews on families of proteins involved in gene regulation and to allow online searching. PMID:7937071

Letters to the Editor

NASA Astrophysics Data System (ADS)

1998-03-01

All the Letters to the Editor in this issue are in the same PostScript or PDF file. Contents Comment on `Magnetic and electric field strengths of high voltage power lines and household appliances' José Luis Giordano Dept. de Ciencia y Tecnología de Materiales y Fluidos, CPSI, Universidad de Zaragoza, Spain Twins paradox S R Carson Norton College, Malton, North Yorkshire, UK On alternative ways of finding the ratio of specific heats of gases Tomas Ficker Physics Department, Technical University of Brno, Czech Republic

Analysis and Comparison of Various Requirements Management Tools for Use in the Shipbuilding Industry

DTIC Science & Technology

2006-09-01

such products as MS Word, MS Excel, MS PowerPoint, Adobe Acrobat, Adobe FrameMaker , Claris FileMaker, Adobe PhotoShop and Adobe Illustrator, it is easy...Adobe FrameMaker , etc. Information can be exported out in the same formats as above plus HTML, MS PowerPoint, and MS Outlook. DOORS is very user...including Postscript, RTF (for PowerPoint), HTML, Interleaf, SVG, FrameMaker , HP LaserJet, HPGL, and EPS. Examples of such charts produced by DOORS

Comparison of Permanent Change of Station Costs for Women and Men Transferred Prematurely from Ships (Computer Diskette).

DTIC Science & Technology

requirements: Post-script. The Objective of this report was to determine whether transferring pregnant women from ships costs the Navy more permanent...change of station (PCS) funds than transferring men and nonpregnant women information was extracted from the enlisted master record concerning gender...from gender-integrated afloat units. The direct costs of transfer prior to PRD was compared for men and women and an estimate of PCS costs, if the ships were not gender-integrated, was also calculated.

Digital version of "Open-File Report 92-179: Geologic map of the Cow Cove Quadrangle, San Bernardino County, California"

USGS Publications Warehouse

Wilshire, Howard G.; Bedford, David R.; Coleman, Teresa

2002-01-01

3. Plottable map representations of the database at 1:24,000 scale in PostScript and Adobe PDF formats. The plottable files consist of a color geologic map derived from the spatial database, composited with a topographic base map in the form of the USGS Digital Raster Graphic for the map area. Color symbology from each of these datasets is maintained, which can cause plot file sizes to be large.

Free forming of the gel by 3D gel printer SWIM-ER

NASA Astrophysics Data System (ADS)

Okada, Koji; Tase, Taishi; Saito, Azusa; Makino, Masato; Gong, Jin; Kawakami, Masaru; Furukawa, Hidemitsu

2015-04-01

Gels, soft and wet materials, have unique properties such as material permeability, biocompatibility and low friction, which are hardly found in hard and dry materials. These superior characteristics of hydrogels promise to expand the medical applications. In recent years, the optical 3D gel printer named SWIM-ER (Soft and Wet Industrial - Easy Realizer) was developed by our team in order to fabricate tough gels with free form. We are aiming to create artificial blood vessel of the gel material by 3D gel printer. Artificial blood vessel is expected to be used for vascular surgery practice. The artificial blood vessel made by 3D gel printer can be create to free form on the basis of the biological data of the patient. Therefore, we believe it is possible to contribute to increasing the success rate and safety of vascular surgery by creating artificial blood vessel with 3D gel printer. The modeling method of SWIM-ER is as follow. Pregel solution is polymerized by one-point UV irradiation with optical fiber. The irradiation area is controlled by computer program, so that exact 3D free forming is realized. In this study, synthesis conditions are re-examined in order to improve the degree of freedom of fabrication. The dimensional accuracy in height direction is improved by increasing the cross linker concentration. We examined the relationship of resolution to the pitch and UV irradiation time in order to improve the modeling accuracy.

A Novel Temporal Bone Simulation Model Using 3D Printing Techniques.

PubMed

Mowry, Sarah E; Jammal, Hachem; Myer, Charles; Solares, Clementino Arturo; Weinberger, Paul

2015-09-01

An inexpensive temporal bone model for use in a temporal bone dissection laboratory setting can be made using a commercially available, consumer-grade 3D printer. Several models for a simulated temporal bone have been described but use commercial-grade printers and materials to produce these models. The goal of this project was to produce a plastic simulated temporal bone on an inexpensive 3D printer that recreates the visual and haptic experience associated with drilling a human temporal bone. Images from a high-resolution CT of a normal temporal bone were converted into stereolithography files via commercially available software, with image conversion and print settings adjusted to achieve optimal print quality. The temporal bone model was printed using acrylonitrile butadiene styrene (ABS) plastic filament on a MakerBot 2x 3D printer. Simulated temporal bones were drilled by seven expert temporal bone surgeons, assessing the fidelity of the model as compared with a human cadaveric temporal bone. Using a four-point scale, the simulated bones were assessed for haptic experience and recreation of the temporal bone anatomy. The created model was felt to be an accurate representation of a human temporal bone. All raters felt strongly this would be a good training model for junior residents or to simulate difficult surgical anatomy. Material cost for each model was $1.92. A realistic, inexpensive, and easily reproducible temporal bone model can be created on a consumer-grade desktop 3D printer.

TouchTerrain: A simple web-tool for creating 3D-printable topographic models

NASA Astrophysics Data System (ADS)

Hasiuk, Franciszek J.; Harding, Chris; Renner, Alex Raymond; Winer, Eliot

2017-12-01

An open-source web-application, TouchTerrain, was developed to simplify the production of 3D-printable terrain models. Direct Digital Manufacturing (DDM) using 3D Printers can change how geoscientists, students, and stakeholders interact with 3D data, with the potential to improve geoscience communication and environmental literacy. No other manufacturing technology can convert digital data into tangible objects quickly at relatively low cost; however, the expertise necessary to produce a 3D-printed terrain model can be a substantial burden: knowledge of geographical information systems, computer aided design (CAD) software, and 3D printers may all be required. Furthermore, printing models larger than the build volume of a 3D printer can pose further technical hurdles. The TouchTerrain web-application simplifies DDM for elevation data by generating digital 3D models customized for a specific 3D printer's capabilities. The only required user input is the selection of a region-of-interest using the provided web-application with a Google Maps-style interface. Publically available digital elevation data is processed via the Google Earth Engine API. To allow the manufacture of 3D terrain models larger than a 3D printer's build volume the selected area can be split into multiple tiles without third-party software. This application significantly reduces the time and effort required for a non-expert like an educator to obtain 3D terrain models for use in class. The web application is deployed at http://touchterrain.geol.iastate.edu/.

Creating, Storing, and Dumping Low and High Resolution Graphics on the Apple IIe Microcomputer System.

ERIC Educational Resources Information Center

Fletcher, Richard K., Jr.

This description of procedures for dumping high and low resolution graphics using the Apple IIe microcomputer system focuses on two special hardware configurations that are commonly used in schools--the Apple Dot Matrix Printer with the Apple Parallel Interface Card, and the Imagewriter Printer with the Apple Super Serial Interface Card. Special…

Engineering Encounters: Creating a Prosthetic Hand

ERIC Educational Resources Information Center

Cook, Kristin Leigh; Bush, Sarah B.; Cox, Richard

2015-01-01

The power of 3D printing technology has grown exponentially in just the past few years--people around the world are using 3D printers to prepare food, create tailored clothing, build cars and homes, and advance the medical field in ways that never seemed possible. In classrooms across the nation, 3D printers have become increasingly common because…

A Model for Managing 3D Printing Services in Academic Libraries

ERIC Educational Resources Information Center

Scalfani, Vincent F.; Sahib, Josh

2013-01-01

The appearance of 3D printers in university libraries opens many opportunities for advancing outreach, teaching, and research programs. The University of Alabama (UA) Libraries recently adopted 3D printing technology and maintains an open access 3D Printing Studio. The Studio consists of a 3D printer, multiple 3D design workstations, and other…

3D Printing Demo - Autodesk

NASA Image and Video Library

2018-03-16

A Zero Launch Mass 3-D printer is being developed by researchers in Swamp Works at NASA's Kennedy Space Center in Florida. The printer can be used for construction projects on the Moon and Mars. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers. This will prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The Kennedy team is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

3D Printing Demo - Autodesk

NASA Image and Video Library

2018-03-16

A Zero Launch Mass 3-D printer is being tested at the Swamp Works at NASA's Kennedy Space Center in Florida. The printer can be used for construction projects on the Moon and Mars. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers. This will prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The Kennedy team is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

3D Printing of Bench

NASA Image and Video Library

2018-02-09

A Zero Launch Mass 3-D printer is being tested at the Swamp Works at NASA's Kennedy Space Center in Florida. The printer can be used for construction projects on the Moon and Mars, and even for troops in remote locations on Earth. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers to prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The group is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

3D Printing Demo - Autodesk

NASA Image and Video Library

2018-03-16

Researchers at NASA's Kennedy Space Center in Florida are developing a Zero Launch Mass 3-D printer at the center's Swamp Works. The printer can be used for construction projects on the Moon and Mars. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers. This will prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The Kennedy team is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

Free software helps map and display data

NASA Astrophysics Data System (ADS)

Wessel, Paul; Smith, Walter H. F.

When creating camera-ready figures, most scientists are familiar with the sequence of raw data → processing → final illustration and with the spending of large sums of money to finalize papers for submission to scientific journals, prepare proposals, and create overheads and slides for various presentations. This process can be tedious and is often done manually, since available commercial or in-house software usually can do only part of the job.To expedite this process, we introduce the Generic Mapping Tools (GMT), which is a free, public domain software package that can be used to manipulate columns of tabular data, time series, and gridded data sets and to display these data in a variety of forms ranging from simple x-y plots to maps and color, perspective, and shaded-relief illustrations. GMT uses the PostScript page description language, which can create arbitrarily complex images in gray tones or 24-bit true color by superimposing multiple plot files. Line drawings, bitmapped images, and text can be easily combined in one illustration. PostScript plot files are device-independent, meaning the same file can be printed at 300 dots per inch (dpi) on an ordinary laserwriter or at 2470 dpi on a phototypesetter when ultimate quality is needed. GMT software is written as a set of UNIX tools and is totally self contained and fully documented. The system is offered free of charge to federal agencies and nonprofit educational organizations worldwide and is distributed over the computer network Internet.

A feasibility study for using ABS plastic and a low-cost 3D printer for patient-specific brachytherapy mould design.

PubMed

Harris, Benjamin D; Nilsson, Sanna; Poole, Christopher M

2015-09-01

This feasibility study aims to determine if a low-cost 3D printer (BitsFromBytes 3D Touch) with ABS plastic can print custom mould structures and catheter channels defined in a brachytherapy treatment planning system (Nucletron Oncentra) for patient-specific treatment. Printer accuracy was evaluated through physical measurement, and print quality was investigated by adjusting print parameters (print speed, layer thickness, percentage infill). Catheter positioning and reproducibility were measured over repeated insertions. ABS plastic water equivalency was investigated by comparing Ir-192 HDR source dose distributions, measured with radiochromic film, in ABS plastic and in water. Structures and catheter channels were printed accurately to within 0.5 mm laterally and 1 mm in the vertical print direction. Adjusting print parameters could reduce print time, albeit with reduced print quality. 3.5 mm channel diameters allowed for easy catheter insertion. Catheter positioning was reproducible to within 0.5 mm but, because of catheter flex within the channel, was on average 1 mm offset from defined TPS positions. This offset could be accounted for by repeating the treatment planning CT scan with the printed mould positioned on the patient. Dose attenuation in ABS plastic and in water was equivalent to within the measurement limitations. While clinical uses for this particular low-cost printer and ABS plastic are limited by print size restrictions and non-certification for biocompatibility, it has been demonstrated that a low-cost 3D printer set-up can accurately create custom moulds and catheter channels potentially acceptable for clinical use.

An interactive program to display user-generated or file-based maps on a personal computer monitor

USGS Publications Warehouse

Langer, W.H.; Stephens, R.W.

1987-01-01

PC MAP-MAKER is an ADVANCED BASIC program written to provide users of IBM XT, IBM AT, and compatible computers with a straight-forward, flexible method to display geographical data on a color or monochrome PC (personal computer) monitor. Data can be political boundaries such as State and county boundaries; natural curvilinear features such as rivers, drainage areas, and geological contacts; and points such as well locations and mineral localities. Essentially any point defined by a latitude and longitude and any line defined by a series of latitude and longitude values can be displayed using the program. PC MAP MAKER allows users to view tabular data from U.S. Geological Survey files such as WATSTORE (National Water Data Storage and Retrieval System) in a map format in a time much shorter than required by sending the data to a line plotter. The screen image can be saved to disk for recall at a later date, and hard copies can be printed with a dot matrix printer. The program is user-friendly, using menus or prompts to guide user input. It is fully documented and structured to allow the user to tailor the program to the user 's specific needs. The documentation includes a tutorial designed to introduce users to the capabilities of the program using the State of Colorado as a demonstration map area. (Author 's abstract)

Direct Write Printing on Thin and Flexible Substrates for Space Applications

NASA Technical Reports Server (NTRS)

Paquette, Beth

2016-01-01

This presentation describes the work done on direct-write printing conductive traces for a flexible detector application. A Repeatability Plan was established to define detector requirements, material and printer selections, printing facilities, and tests to verify requirements are met. Designs were created for the detector, and printed using an aerosol jet printer. Testing for requirement verification is ongoing.

Book Lovers, Technophiles, Pragmatists, and Printers: The Social and Demographic Structure of User Attitudes toward E-Books

ERIC Educational Resources Information Center

Revelle, Andy; Messner, Kevin; Shrimplin, Aaron; Hurst, Susan

2012-01-01

Q-methodology was used to identify clusters of opinions about e-books at Miami University. The research identified four distinct opinion types among those investigated: Book Lovers, Technophiles, Pragmatists, and Printers. The initial Q-methodology study results were then used as a basis for a large-n survey of undergraduates, graduate students,…

Intelligent editor/printer enhancements

NASA Technical Reports Server (NTRS)

Woodfill, M. C.; Pheanis, D. C.

1983-01-01

Microprocessor support hardware, software, and cross assemblers relating to the Motorola 6800 and 6809 process systems were developed. Pinter controller and intelligent CRT development are discussed. The user's manual, design specifications for the MC6809 version of the intelligent printer controller card, and a 132-character by 64-line intelligent CRT display system using a Motorola 6809 MPU, and a one-line assembler and disassembler are provided.

Tasks and Status: Newspaper Copy Editing and the Division of Newsroom Labor.

ERIC Educational Resources Information Center

Solomon, William S.

Colonial printers were more or less forced to take sides during the Revolutionary era. As they did so, their social status changed from that akin to mechanics to that of spokespersons of a social movement. From this time on, the gradual separation of editor from printer formed a social basis for defining a journalist's tasks as editorial, not…

14 CFR 221.550 - Copies of tariffs made from filer's printer(s) located in Department's public reference room.

Code of Federal Regulations, 2010 CFR

2010-01-01

...(s) located in Department's public reference room. 221.550 Section 221.550 Aeronautics and Space... public reference room. Copies of information contained in a filer's on-line tariff database may be... Reference Room by the filer. The filer may assess a fee for copying, provided it is reasonable and that no...

Determining and Meeting Personnel Training Needs

ERIC Educational Resources Information Center

Jennings, Anita

2005-01-01

The role of the library has changed significantly during the past 2 decades. Twenty years ago, it could have been considered the norm for a small to mid-sized library to have one or two computers for patron use. Staff was fortunate to have a computer connected to a printer--a tractor-feed ink jet printer--with a basic word processing application…

Low cost lab-on-a-chip prototyping with a consumer grade 3D printer.

PubMed

Comina, Germán; Suska, Anke; Filippini, Daniel

2014-08-21

Versatile prototyping of 3D printed lab-on-a-chip devices, supporting different forms of sample delivery, transport, functionalization and readout, is demonstrated with a consumer grade printer, which centralizes all critical fabrication tasks. Devices cost 0.57US$ and are demonstrated in chemical sensing and micromixing examples, which exploit established principles from reference technologies.

Implementing a 3D printing service in a biomedical library

PubMed Central

Walker, Verma

2017-01-01

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work. PMID:28096747

Implementing a 3D printing service in a biomedical library.

PubMed

Walker, Verma

2017-01-01

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work.

3D Printing of Bench

NASA Image and Video Library

2018-02-09

Research engineers at NASA's Kennedy Space Center in Florida are working on a Zero Launch Mass 3-D printer at the center's Swamp Works. The printer can be used for construction projects on the Moon and Mars, and even for troops in remote locations on Earth. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers to prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The group is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

3D Printing of Bench

NASA Image and Video Library

2018-02-09

Pellets made from simulated lunar regolith, or dirt, and polymers are being used to test a Zero Launch Mass 3-D printer in the Swamp Works at NASA's Kennedy Space Center in Florida. The printer can be used for construction projects on the Moon and Mars, and even for troops in remote locations on Earth. Zero launch mass refers to the fact that the printer uses these pellets to prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. The group is working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

A scalable SIMD digital signal processor for high-quality multifunctional printer systems

NASA Astrophysics Data System (ADS)

Kang, Hyeong-Ju; Choi, Yongwoo; Kim, Kimo; Park, In-Cheol; Kim, Jung-Wook; Lee, Eul-Hwan; Gahang, Goo-Soo

2005-01-01

This paper describes a high-performance scalable SIMD digital signal processor (DSP) developed for multifunctional printer systems. The DSP supports a variable number of datapaths to cover a wide range of performance and maintain a RISC-like pipeline structure. Many special instructions suitable for image processing algorithms are included in the DSP. Quad/dual instructions are introduced for 8-bit or 16-bit data, and bit-field extraction/insertion instructions are supported to process various data types. Conditional instructions are supported to deal with complex relative conditions efficiently. In addition, an intelligent DMA block is integrated to align data in the course of data reading. Experimental results show that the proposed DSP outperforms a high-end printer-system DSP by at least two times.

Field estimates of gravity terrain corrections and Y2K-compatible method to convert from gravity readings with multiple base stations to tide- and long-term drift-corrected observations

USGS Publications Warehouse

Plouff, Donald

2000-01-01

Gravity observations are directly made or are obtained from other sources by the U.S. Geological Survey in order to prepare maps of the anomalous gravity field and consequently to interpret the subsurface distribution of rock densities and associated lithologic or geologic units. Observations are made in the field with gravity meters at new locations and at reoccupations of previously established gravity "stations." This report illustrates an interactively-prompted series of steps needed to convert gravity "readings" to values that are tied to established gravity datums and includes computer programs to implement those steps. Inasmuch as individual gravity readings have small variations, gravity-meter (instrument) drift may not be smoothly variable, and acommodations may be needed for ties to previously established stations, the reduction process is iterative. Decision-making by the program user is prompted by lists of best values and graphical displays. Notes about irregularities of topography, which affect the value of observed gravity but are not shown in sufficient detail on topographic maps, must be recorded in the field. This report illustrates ways to record field notes (distances, heights, and slope angles) and includes computer programs to convert field notes to gravity terrain corrections. This report includes approaches that may serve as models for other applications, for example: portrayal of system flow; style of quality control to document and validate computer applications; lack of dependence on proprietary software except source code compilation; method of file-searching with a dwindling list; interactive prompting; computer code to write directly in the PostScript (Adobe Systems Incorporated) printer language; and high-lighting the four-digit year on the first line of time-dependent data sets for assured Y2K compatibility. Computer source codes provided are written in the Fortran scientific language. In order for the programs to operate, they first must be converted (compiled) into an executable form on the user's computer. Although program testing was done in a UNIX (tradename of American Telephone and Telegraph Company) computer environment, it is anticipated that only a system-dependent date-and-time function may need to be changed for adaptation to other computer platforms that accept standard Fortran code.d del iliscipit volorer sequi ting etue feum zzriliquatum zzriustrud esenibh ex esto esequat.

What's in "Your" File Cabinet? Leveraging Technology for Document Imaging and Storage

ERIC Educational Resources Information Center

Flaherty, William

2011-01-01

Spotsylvania County Public Schools (SCPS) in Virginia uses a document-imaging solution that leverages the features of a multifunction printer (MFP). An MFP is a printer, scanner, fax machine, and copier all rolled into one. It can scan a document and email it all in one easy step. Software is available that allows the MFP to scan bubble sheets and…

Case report of asthma associated with 3D printing.

PubMed

House, R; Rajaram, N; Tarlo, S M

2017-12-02

Three-dimensional (3D) printing is being increasingly used in manufacturing and by small business entrepreneurs and home hobbyists. Exposure to airborne emissions during 3D printing raises the issue of whether there may be adverse health effects associated with these emissions. We present a case of a worker who developed asthma while using 3D printers, which illustrates that respiratory problems may be associated with 3D printer emissions. The patient was a 28-year-old self-employed businessman with a past history of asthma in childhood, which had resolved completely by the age of eight. He started using 10 fused deposition modelling 3D printers with acrylonitrile-butadiene-styrene filaments in a small work area of approximately 3000 cubic feet. Ten days later, he began to experience recurrent chest tightness, shortness of breath and coughing at work. After 3 months, his work environment was modified by reducing the number of printers, changing to polylactic acid filaments and using an air purifier with an high-efficiency particulate air filter and organic cartridge. His symptoms improved gradually, although he still needed periodic treatment with a salbutamol inhaler. While still symptomatic, a methacholine challenge indicated a provocation concentration causing a 20% fall in FEV1 (PC20) of 4 mg/ml, consistent with mild asthma. Eventually, his symptoms resolved completely and a second methacholine challenge after symptom resolution was normal (PC20 > 16 mg/ml). This case indicates that workers may develop respiratory problems, including asthma when using 3D printers. Further investigation of the specific airborne emissions and health problems from 3D printing is warranted. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Fabrication of a customized bone scaffold using a homemade medical 3D printer for comminuted fractures

NASA Astrophysics Data System (ADS)

Yoon, Do-Kun; Jung, Joo-Young; Shin, Han-Back; Kim, Moo-Sub; Choe, Bo-Young; Kim, Sunmi; Suh, Tae Suk; Lee, Keum Sil; Xing, Lei

2016-09-01

The purpose of this study was to show a 3D printed reconstruction model of a bone destroyed by a comminuted fracture. After a thoracic limb of a cow with a comminuted fracture was scanned by using computed tomography, a scaffold was designed by using a 3D modeling tool for its reconstruction and fabricated by using a homemade medical 3D printer. The homemade medical 3D printer was designed for medical use. In order to reconstruct the geometry of the destroyed bone, we use the geometry of a similar section (reference geometry) of normal bone in the 3D modeling process. The missing part between the destroyed ridge and the reference geometry was filled with an effective space by using a manual interpolation. Inexpensive materials and free software were used to construct the medical 3D printer system. The fabrication of the scaffold progressed according to the design of reconstructed bone by using this medical 3D printer. The material of the scaffold was biodegradable material, and could be transplanted into the human body. The fabricated scaffold was correctly inserted into the fractured bone in place of the destroyed portion, with good agreement. According to physical stress test results, the performance of printing resolution was 0.1 mm. The average geometrical error of the scaffold was below 0.3 mm. The reconstructed bone by using the fabricated scaffold was able to support the weight of the human body. No process used to obtain the result was complex or required many resources. The methods and results in this study show several possible clinical applications in fields such as orthopedics or oncology without a need to purchase high-price instruments for 3D printing.

Characterization of particle emission from laser printers.

PubMed

Scungio, Mauro; Vitanza, Tania; Stabile, Luca; Buonanno, Giorgio; Morawska, Lidia

2017-05-15

Emission of particles from laser printers in office environments is claimed to have impact on human health due to likelihood of exposure to high particle concentrations in such indoor environments. In the present paper, particle emission characteristics of 110 laser printers from different manufacturers were analyzed, and estimations of their emission rates were made on the basis of measurements of total concentrations of particles emitted by the printers placed in a chamber, as well as particle size distributions. The emission rates in terms of number, surface area and mass were found to be within the ranges from 3.39×10 8 partmin -1 to 1.61×10 12 partmin -1 , 1.06×10 0 mm 2 min -1 to 1.46×10 3 mm 2 min -1 and 1.32×10 -1 μgmin -1 to 1.23×10 2 μgmin -1 , respectively, while the median mode value of the emitted particles was found equal to 34nm. In addition, the effect of laser printing emissions in terms of employees' exposure in offices was evaluated on the basis of the emission rates, by calculating the daily surface area doses (as sum of alveolar and tracheobronchial deposition fraction) received assuming a typical printing scenario. In such typical printing conditions, a relatively low total surface area dose (2.7mm 2 ) was estimated for office employees with respect to other indoor microenvironments including both workplaces and homes. Nonetheless, for severe exposure conditions, characterized by operating parameters falling beyond the typical values (i.e. smaller office, lower ventilation, printer located on the desk, closer to the person, higher printing frequency etc.), significantly higher doses are expected. Copyright © 2017 Elsevier B.V. All rights reserved.

Low-Cost 3D Printers Enable High-Quality and Automated Sample Preparation and Molecular Detection

PubMed Central

Chan, Kamfai; Coen, Mauricio; Hardick, Justin; Gaydos, Charlotte A.; Wong, Kah-Yat; Smith, Clayton; Wilson, Scott A.; Vayugundla, Siva Praneeth; Wong, Season

2016-01-01

Most molecular diagnostic assays require upfront sample preparation steps to isolate the target’s nucleic acids, followed by its amplification and detection using various nucleic acid amplification techniques. Because molecular diagnostic methods are generally rather difficult to perform manually without highly trained users, automated and integrated systems are highly desirable but too costly for use at point-of-care or low-resource settings. Here, we showcase the development of a low-cost and rapid nucleic acid isolation and amplification platform by modifying entry-level 3D printers that cost between $400 and $750. Our modifications consisted of replacing the extruder with a tip-comb attachment that houses magnets to conduct magnetic particle-based nucleic acid extraction. We then programmed the 3D printer to conduct motions that can perform high-quality extraction protocols. Up to 12 samples can be processed simultaneously in under 13 minutes and the efficiency of nucleic acid isolation matches well against gold-standard spin-column-based extraction technology. Additionally, we used the 3D printer’s heated bed to supply heat to perform water bath-based polymerase chain reactions (PCRs). Using another attachment to hold PCR tubes, the 3D printer was programmed to automate the process of shuttling PCR tubes between water baths. By eliminating the temperature ramping needed in most commercial thermal cyclers, the run time of a 35-cycle PCR protocol was shortened by 33%. This article demonstrates that for applications in resource-limited settings, expensive nucleic acid extraction devices and thermal cyclers that are used in many central laboratories can be potentially replaced by a device modified from inexpensive entry-level 3D printers. PMID:27362424

Accuracy of three-dimensional, paper-based models generated using a low-cost, three-dimensional printer.

PubMed

Olszewski, Raphael; Szymor, Piotr; Kozakiewicz, Marcin

2014-12-01

Our study aimed to determine the accuracy of a low-cost, paper-based 3D printer by comparing a dry human mandible to its corresponding three-dimensional (3D) model using a 3D measuring arm. One dry human mandible and its corresponding printed model were evaluated. The model was produced using DICOM data from cone beam computed tomography. The data were imported into Maxilim software, wherein automatic segmentation was performed, and the STL file was saved. These data were subsequently analysed, repaired, cut and prepared for printing with netfabb software. These prepared data were used to create a paper-based model of a mandible with an MCor Matrix 300 printer. Seventy-six anatomical landmarks were chosen and measured 20 times on the mandible and the model using a MicroScribe G2X 3D measuring arm. The distances between all the selected landmarks were measured and compared. Only landmarks with a point inaccuracy less than 30% were used in further analyses. The mean absolute difference for the selected 2016 measurements was 0.36 ± 0.29 mm. The mean relative difference was 1.87 ± 3.14%; however, the measurement length significantly influenced the relative difference. The accuracy of the 3D model printed using the paper-based, low-cost 3D Matrix 300 printer was acceptable. The average error was no greater than that measured with other types of 3D printers. The mean relative difference should not be considered the best way to compare studies. The point inaccuracy methodology proposed in this study may be helpful in future studies concerned with evaluating the accuracy of 3D rapid prototyping models. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels.

PubMed

Gong, Hua; Bickham, Bryce P; Woolley, Adam T; Nordin, Gregory P

2017-08-22

While there is great interest in 3D printing for microfluidic device fabrication, to-date the achieved feature sizes have not been in the truly microfluidic regime (<100 μm). In this paper we demonstrate that a custom digital light processor stereolithographic (DLP-SLA) 3D printer and a specifically-designed, low cost, custom resin can readily achieve flow channel cross sections as small as 18 μm × 20 μm. Our 3D printer has a projected image plane resolution of 7.6 μm and uses a 385 nm LED, which dramatically increases the available selection of UV absorbers for resin formulation compared to 3D printers with 405 nm LEDs. Beginning with 20 candidate absorbers, we demonstrate the evaluation criteria and process flow required to develop a high-resolution resin. In doing so, we introduce a new mathematical model for characterizing the resin optical penetration depth based only on measurement of the absorber's molar absorptivity. Our final resin formulation uses 2-nitrophenyl phenyl sulfide (NPS) as the UV absorber. We also develop a novel channel narrowing technique that, together with the new resin and 3D printer resolution, enables small flow channel fabrication. We demonstrate the efficacy of our approach by fabricating 3D serpentine flow channels 41 mm long in a volume of only 0.12 mm 3 , and by printing high aspect ratio flow channels <25 μm wide and 3 mm tall. These results indicate that 3D printing is finally positioned to challenge the pre-eminence of methods such as soft lithography for microfluidic device prototyping and fabrication.

Use of 3D printer model to study vertebral artery anatomy and variations in developmental craniovertebral junction anomalies and as a preoperative tool—an institutional experience

PubMed Central

Chopra, Sanjeev; Kataria, Rashim; Sinha, Virendra Deo

2017-01-01

Background Spinal instrumentation using rods and screws have become procedure of choice for posterior fixation. Vertebral artery anatomy is highly variable in this region posing challenges during surgery. Our study used 3D printer model to understand the anatomy and variations in vertebral artery in live patients thereby providing an accurate idea about vertebral artery injury risk in these patients preoperatively and to rehearse the whole procedure. Methods Ten patients of developmental craniovertebral junction (CVJ) anomalies who were planned for operative intervention in the Department of Neurosurgery at SMS Hospital from February 2016 to December 2016 were analysed using a 3D printer model. Results Out of twenty vertebral arteries studied in ten patients, two were hypoplastic and out of these one could not be appreciated on 3D printer model. Out of remaining nineteen, thirteen arteries were found to lie outside the joint, three were in lateral third, one traversed the middle third of joint and one lied in medial third. In one patient, the vertebral artery was stretched and it traversed horizontally over the joint. Out of ten patients studied, nine were having occipitalised atlas and so entry of these vertebral arteries into cranium were classified as given by Wang et al. into four types. Conclusions By our study, 3D printer model was extremely helpful in analyzing joints and vertebral artery preoperatively and making the surgeon acquainted about the placement and trajectory of the screws accordingly. In our opinion, these models should be included as a basic investigation tool in these patients. PMID:29354734

3-D Printers Spread from Engineering Departments to Designs across Disciplines

ERIC Educational Resources Information Center

Chen, Angela

2012-01-01

The ability to print a 3-D object may sound like science fiction, but it has been around in some form since the 1980s. Also called rapid prototyping or additive manufacturing, the idea is to take a design from a computer file and forge it into an object, often in flat cross-sections that can be assembled into a larger whole. While the printer on…

Development of modular control software for construction 3D-printer

NASA Astrophysics Data System (ADS)

Bazhanov, A.; Yudin, D.; Porkhalo, V.

2018-03-01

This article discusses the approach to developing modular software for real-time control of an industrial construction 3D printer. The proposed structure of a two-level software solution is implemented for a robotic system that moves in a Cartesian coordinate system with multi-axis interpolation. An algorithm for the formation and analysis of a path is considered to enable the most effective control of printing through dynamic programming.

3D printing of MRI compatible components: why every MRI research group should have a low-budget 3D printer.

PubMed

Herrmann, Karl-Heinz; Gärtner, Clemens; Güllmar, Daniel; Krämer, Martin; Reichenbach, Jürgen R

2014-10-01

To evaluate low budget 3D printing technology to create MRI compatible components. A 3D printer is used to create customized MRI compatible components, a loop-coil platform and a multipart mouse fixation. The mouse fixation is custom fit for a dedicated coil and facilitates head fixation with bite bar, anesthetic gas supply and biomonitoring sensors. The mouse fixation was tested in a clinical 3T scanner. All parts were successfully printed and proved MR compatible. Both design and printing were accomplished within a few days and the final print results were functional with well defined details and accurate dimensions (Δ<0.4mm). MR images of the mouse head clearly showed reduced motion artifacts, ghosting and signal loss when using the fixation. We have demonstrated that a low budget 3D printer can be used to quickly progress from a concept to a functional device at very low production cost. While 3D printing technology does impose some restrictions on model geometry, additive printing technology can create objects with complex internal structures that can otherwise not be created by using lathe technology. Thus, we consider a 3D printer a valuable asset for MRI research groups. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

GEM printer: 3D gel printer for free shaping of functional gel engineering materials

NASA Astrophysics Data System (ADS)

Furukawa, Hidemitsu; Muroi, Hisato; Yamamoto, Kouki; Serizawa, Ryo; Gong, Jin

2013-04-01

In the past decade, several high-strength gels have been developed. These gels are expected to use as a kind of new engineering materials in the fields of industry and medical as substitutes to polyester fibers, which are materials of artificial blood vessels. The gels have both low surface friction and well permeability due to a large amount of water absorbed in the gels, which are superiority of the gels compering to the polyester fibers. It is, however, difficult for gels to be forked structure or cavity structure by using cutting or mold. Consequently, it is necessary to develop the additive manufacturing device to synthesize and mode freely gels at the same time. Here we try to develop an optical 3D gel printer that enables gels to be shaped precisely and freely. For the free forming of high-strength gels, the 1st gels are ground to particles and mixed with 2nd pregel solution, and the mixed solution is gelled by the irradiation of UV laser beam through an optical fiber. The use of the optical fiber makes one-point UV irradiation possible. Since the optical fiber is controlled by 3D-CAD, the precise and free molding in XYZ directions is easily realized. We successfully synthesized tough gels using the gel printer.

Development of the Improving Process for the 3D Printed Structure

NASA Astrophysics Data System (ADS)

Takagishi, Kensuke; Umezu, Shinjiro

2017-01-01

The authors focus on the Fused Deposition Modeling (FDM) 3D printer because the FDM 3D printer can print the utility resin material. It can print with low cost and therefore it is the most suitable for home 3D printer. The FDM 3D printer has the problem that it produces layer grooves on the surface of the 3D printed structure. Therefore the authors developed the 3D-Chemical Melting Finishing (3D-CMF) for removing layer grooves. In this method, a pen-style device is filled with a chemical able to dissolve the materials used for building 3D printed structures. By controlling the behavior of this pen-style device, the convex parts of layer grooves on the surface of the 3D printed structure are dissolved, which, in turn, fills the concave parts. In this study it proves the superiority of the 3D-CMF than conventional processing for the 3D printed structure. It proves utilizing the evaluation of the safety, selectively and stability. It confirms the improving of the 3D-CMF and it is confirmed utilizing the data of the surface roughness precision and the observation of the internal state and the evaluation of the mechanical characteristics.

Development of the Improving Process for the 3D Printed Structure

PubMed Central

Takagishi, Kensuke; Umezu, Shinjiro

2017-01-01

The authors focus on the Fused Deposition Modeling (FDM) 3D printer because the FDM 3D printer can print the utility resin material. It can print with low cost and therefore it is the most suitable for home 3D printer. The FDM 3D printer has the problem that it produces layer grooves on the surface of the 3D printed structure. Therefore the authors developed the 3D-Chemical Melting Finishing (3D-CMF) for removing layer grooves. In this method, a pen-style device is filled with a chemical able to dissolve the materials used for building 3D printed structures. By controlling the behavior of this pen-style device, the convex parts of layer grooves on the surface of the 3D printed structure are dissolved, which, in turn, fills the concave parts. In this study it proves the superiority of the 3D-CMF than conventional processing for the 3D printed structure. It proves utilizing the evaluation of the safety, selectively and stability. It confirms the improving of the 3D-CMF and it is confirmed utilizing the data of the surface roughness precision and the observation of the internal state and the evaluation of the mechanical characteristics. PMID:28054558

Development of the Improving Process for the 3D Printed Structure.

PubMed

Takagishi, Kensuke; Umezu, Shinjiro

2017-01-05

The authors focus on the Fused Deposition Modeling (FDM) 3D printer because the FDM 3D printer can print the utility resin material. It can print with low cost and therefore it is the most suitable for home 3D printer. The FDM 3D printer has the problem that it produces layer grooves on the surface of the 3D printed structure. Therefore the authors developed the 3D-Chemical Melting Finishing (3D-CMF) for removing layer grooves. In this method, a pen-style device is filled with a chemical able to dissolve the materials used for building 3D printed structures. By controlling the behavior of this pen-style device, the convex parts of layer grooves on the surface of the 3D printed structure are dissolved, which, in turn, fills the concave parts. In this study it proves the superiority of the 3D-CMF than conventional processing for the 3D printed structure. It proves utilizing the evaluation of the safety, selectively and stability. It confirms the improving of the 3D-CMF and it is confirmed utilizing the data of the surface roughness precision and the observation of the internal state and the evaluation of the mechanical characteristics.

Technology for Subsea 3D Printing Structures for Oil and Gas Production in Arctic Region

NASA Astrophysics Data System (ADS)

Musipov, H. N.; Nikitin, V. S.; Bakanovskaya, L. N.

2017-11-01

The article considers an unconventional technology of offshore oil production and the prospects for its further development. The complexity of Arctic shelf development and the use of subsea production units have been analyzed. An issue of the subsea drilling unit construction technology with the help of 3D printers has been considered. An approximate economic efficiency calculation of the 3D printer technology introduction has been given.

Experimental and Computational Modeling of Rarefaction Wave Eliminators Suitable for the BRL 2.44 m Shock Tube

DTIC Science & Technology

1983-06-01

made directly from the oscilloscope. Finai data processing was completed with the computer, printer , and plotter. Tables and plots of pressure-time...BASIC DATA ACQUISITION PRINTER FINAL DATA REDUCTION TEKTRONIX 4641 HARD COPY[ TEKTRONIX 4631 PLOTTER COMPUTER TEKTRONIX TEKTRONIX I 4662 4052 DIGITAL...79409 Columbus, OH 43201 1 University of Arkansas 1 Director Department of Physics Applied Physics Laboratory ATTN: Prof 0. Zinke The Johns Hopkins

Defense Additive Manufacturing: DOD Needs to Systematically Track Department-wide 3D Printing Efforts

DTIC Science & Technology

2015-10-01

Clip Additively Manufactured • The Navy installed a 3D printer aboard the USS Essex to demonstrate the ability to additively develop and produce...desired result and vision to have the capability on the fleet. These officials stated that the Navy plans to install 3D printers on two additional...DEFENSE ADDITIVE MANUFACTURING DOD Needs to Systematically Track Department-wide 3D Printing Efforts Report to

Wax transfer printing to enable robust barrier definition in devices based on non-standard porous materials

NASA Astrophysics Data System (ADS)

To, Anthony; Downs, Corey; Fu, Elain

2017-05-01

Wax printing has become a common method of fabricating channels in cellulose-based microfluidic devices. However, a limitation of wax printing is that it is restricted to relatively thin, smooth substrates that are compatible with processing by a commercial wax printer. In the current report, we describe a simple patterning method that extends the utility of wax printers for creating hydrophobic barriers on non-standard porous substrates via a process called wax transfer printing. We demonstrate the use of multiple wax transfer cycles to create well-defined, robust, and reproducible barriers in a thick cellulose substrate that is not compatible with feeding through a wax printer. We characterize the method for (i) wax spreading within the substrate as a function of heating time, (ii) the ability to create functional barriers in a substrate, and (iii) reproducibility in line width.

Fracture network created by 3D printer and its validation using CT images

NASA Astrophysics Data System (ADS)

Suzuki, A.; Watanabe, N.; Li, K.; Horne, R. N.

2017-12-01

Understanding flow mechanisms in fractured media is essential for geoscientific research and geological development industries. This study used 3D printed fracture networks in order to control the properties of fracture distributions inside the sample. The accuracy and appropriateness of creating samples by the 3D printer was investigated by using a X-ray CT scanner. The CT scan images suggest that the 3D printer is able to reproduce complex three-dimensional spatial distributions of fracture networks. Use of hexane after printing was found to be an effective way to remove wax for the post-treatment. Local permeability was obtained by the cubic law and used to calculate the global mean. The experimental value of the permeability was between the arithmetic and geometric means of the numerical results, which is consistent with conventional studies. This methodology based on 3D printed fracture networks can help validate existing flow modeling and numerical methods.

Additive Manufacturing of Syntactic Foams: Part 2: Specimen Printing and Mechanical Property Characterization

NASA Astrophysics Data System (ADS)

Singh, Ashish Kumar; Saltonstall, Brooks; Patil, Balu; Hoffmann, Niklas; Doddamani, Mrityunjay; Gupta, Nikhil

2018-03-01

High-density polyethylene (HDPE) and its fly ash cenosphere-filled syntactic foam filaments have been recently developed. These filaments are used for three-dimensional (3D) printing using a commercial printer. The developed syntactic foam filament (HDPE40) contains 40 wt.% cenospheres in the HDPE matrix. Printing parameters for HDPE and HDPE40 were optimized for use in widely available commercial printers, and specimens were three-dimensionally (3D) printed for tensile testing at strain rate of 10-3 s-1. Process optimization resulted in smooth operation of the 3D printer without nozzle clogging or cenosphere fracture during the printing process. Characterization results revealed that the tensile modulus values of 3D-printed HDPE and HDPE40 specimens were higher than those of injection-molded specimens, while the tensile strength was comparable, but the fracture strain and density were lower.

Atmospheric nonequilibrium mini-plasma jet created by a 3D printer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takamatsu, Toshihiro, E-mail: toshihiro@plasma.es.titech.ac.jp; Tokyo Institute of Technology, Department of Energy Sciences, J2-32, 4259 Nagatsuta, Midori-ku, Yokohama, 226-8502; Kawano, Hiroaki

2015-07-15

In this study, a small-sized plasma jet source with a 3.7 mm head diameter was created via a 3D printer. The jet’s emission properties and OH radical concentrations (generated by argon, helium, and nitrogen plasmas) were investigated using optical emission spectrometry (OES) and electron spin resonance (ESR). As such, for OES, each individual gas plasma propagates emission lines that derive from gases and ambient air inserted into the measurement system. For the case of ESR, a spin adduct of the OH radical is typically observed for all gas plasma treatment scenarios with a 10 s treatment by helium plasma generatingmore » the largest amount of OH radicals at 110 μM. Therefore, it was confirmed that a plasma jet source made by a 3D printer can generate stable plasmas using each of the aforementioned three gases.« less

Feasibility of Bioprinting with a Modified Desktop 3D Printer.

PubMed

Goldstein, Todd A; Epstein, Casey J; Schwartz, John; Krush, Alex; Lagalante, Dan J; Mercadante, Kevin P; Zeltsman, David; Smith, Lee P; Grande, Daniel A

2016-12-01

Numerous studies have shown the capabilities of three-dimensional (3D) printing for use in the medical industry. At the time of this publication, basic home desktop 3D printer kits can cost as little as $300, whereas medical-specific 3D bioprinters can cost more than $300,000. The purpose of this study is to show how a commercially available desktop 3D printer could be modified to bioprint an engineered poly-l-lactic acid scaffold containing viable chondrocytes in a bioink. Our bioprinter was used to create a living 3D functional tissue-engineered cartilage scaffold. In this article, we detail the design, production, and calibration of this bioprinter. In addition, the bioprinted cells were tested for viability, proliferation, biochemistry, and gene expression; these tests showed that the cells survived the printing process, were able to continue dividing, and produce the extracellular matrix expected of chondrocytes.

Future enhancements to 3D printing and real time production

NASA Astrophysics Data System (ADS)

Landa, Joseph; Jenkins, Jeffery; Wu, Jerry; Szu, Harold

2014-05-01

The cost and scope of additive printing machines range from several hundred to hundreds of thousands of dollars. For the extra money, one can get improvements in build size, selection of material properties, resolution, and consistency. However, temperature control during build and fusing predicts outcome and protects the IP by large high cost machines. Support material options determine geometries that can be accomplished which drives cost and complexity of printing heads. Historically, 3D printers have been used for design and prototyping efforts. Recent advances and cost reduction sparked new interest in developing printed products and consumables such as NASA who is printing food, printing consumer parts (e.g. cell phone cases, novelty toys), making tools and fixtures in manufacturing, and recursively print a self-similar printer (c.f. makerbot). There is a near term promise of the capability to print on demand products at the home or office... directly from the printer to use.

33 CFR 148.115 - How many copies of the application must I send and where must I send them?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false How many copies of the application must I send and where must I send them? 148.115 Section 148.115 Navigation and Navigable Waters... Application for a License § 148.115 How many copies of the application must I send and where must I send them...

Message passing with queues and channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dozsa, Gabor J; Heidelberger, Philip; Kumar, Sameer

In an embodiment, a send thread receives an identifier that identifies a destination node and a pointer to data. The send thread creates a first send request in response to the receipt of the identifier and the data pointer. The send thread selects a selected channel from among a plurality of channels. The selected channel comprises a selected hand-off queue and an identification of a selected message unit. Each of the channels identifies a different message unit. The selected hand-off queue is randomly accessible. If the selected hand-off queue contains an available entry, the send thread adds the first sendmore » request to the selected hand-off queue. If the selected hand-off queue does not contain an available entry, the send thread removes a second send request from the selected hand-off queue and sends the second send request to the selected message unit.« less

Advanced 3D Printers for Cellular Solids

DTIC Science & Technology

2016-06-30

2211 3d printing , cellular solids REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10. SPONSOR/MONITOR’S ACRONYM(S) ARO 8...quality 3D printing and rapid prototyping in a fraction of the time taken by traditional 3D printers, using eco-friendly, inexpensive office paper and...STL file, which then can be used in printing the 3D model. Mechanical performance using compressive crushing of the 3D printed part will be studied

European Research and Development in Hybrid Flexible Electronics

DTIC Science & Technology

2010-07-01

printing lab houses industrial sized screen printers, dryers , roll-to-roll printers capable of flexographic and gravure printing on 10-inch-wide paper ... papers were to be identified within the Web of Science (WoS) by means of a “filter,” described below, and the analysis was intended to provide the...National Science Foundation. Public Papers of the Presidents 120:338. 2 NSF Investing in America’s Future: Strategic Plan FY 2006–2011. Washington, DC

DTD Creation for the Software Technology for Adaptable, Reliable Systems (STARS) Program

DTIC Science & Technology

1990-06-23

developed to store documents in a format peculiar to the program’s design . Editing the document became easy since word processors adjust all spacing and...descriptive markup may be output to a 3 CDRL 1810 January 26, 1990 variety of devices ranging from high quality typography printers through laser printers...provision for non-SGML material, such as graphics , to be inserted in a document. For these reasons the Computer-Aided Acquisition and Logistics Support

Impact of particle emissions of new laser printers on modeled office room

NASA Astrophysics Data System (ADS)

Koivisto, Antti J.; Hussein, Tareq; Niemelä, Raimo; Tuomi, Timo; Hämeri, Kaarle

2010-06-01

In this study, we present how an indoor aerosol model can be used to characterize particle emitter and predict influence of the source on indoor air quality. Particle size-resolved emission rates were quantified and the source's influence on indoor air quality was estimated by using office model simulations. We measured particle emissions from three modern laser printers in a flow-through chamber. Measured parameters were used as input parameters for an indoor aerosol model, which we then used to quantify the particle emission rates. The same indoor aerosol model was used to simulate the effect of the particle emission source inside an office model. The office model consists of a mechanically ventilated empty room and the particle source. The aerosol from the ventilation air was a filtered urban background aerosol. The effect of the ventilation rate was studied using three different ventilation ratios 1, 2 and 3 h -1. According to the model, peak emission rates of the printers exceeded 7.0 × 10 8 s -1 (2.5 × 10 12 h -1), and emitted mainly ultrafine particles (diameter less than 100 nm). The office model simulation results indicate that a print job increases ultrafine particle concentration to a maximum of 2.6 × 10 5 cm -3. Printer-emitted particles increased 6-h averaged particle concentration over eleven times compared to the background particle concentration.

Continuous-tone applications in digital hard-copy output devices

NASA Astrophysics Data System (ADS)

Saunders, Jeffrey C.

1990-11-01

Dye diffusion technology has made a recent entry into the hardcopy printer arena making it now possible to achieve near-photographic quality images from digital raster image data. Whereas the majority of low cost printers utilizing ink-jet, thermal wax, or dotmatrix technologies advertise high resolution printheads, the restrictions which dithering algorithms apply to these inherently binary printing systems force them to sacrifice spatial resolution capability for tone scale reproduction. Dye diffusion technology allows a fully continuous range of density at each pixel location thus preserving the full spatial resolution capability of the printhead; spatial resolution is not sacrificed for tone scale. This results in images whose quality is far superior to the ink-jet or wax-transfer products; image quality so high in fact, to the unaided eye, dye diffusion images are indistinguishable from their silver-halide counterparts. Eastman Kodak Co. offers a highly refined application of dye diffusion technology in the Kodak XL 7700 Digital Continuous Tone Printer and Kodak EKTATHERM media products. The XL . 7700 Printer represents a serious alternative to expensive laser-based film recorders for applications which require high quality image output from digital data files. This paper presents an explanation of dye diffusion printing, what distinguishes it from other technologies, sensitometric control and image quality parameters, and applications within the industry, particularly that of Airborne Reconnaissance and Remote Sensing.

MFP scanner motion characterization using self-printed target

NASA Astrophysics Data System (ADS)

Kim, Minwoong; Bauer, Peter; Wagner, Jerry K.; Allebach, Jan P.

2015-01-01

Multifunctional printers (MFP) are products that combine the functions of a printer, scanner, and copier. Our goal is to help customers to be able to easily diagnose scanner or print quality issues with their products by developing an automated diagnostic system embedded in the product. We specifically focus on the characterization of scanner motions, which may be defective due to irregular movements of the scan-head. The novel design of our test page and two-stage diagnostic algorithm are described in this paper. The most challenging issue is to evaluate the scanner performance properly when both printer and scanner units contribute to the motion errors. In the first stage called the uncorrected-print-error-stage, aperiodic and periodic motion behaviors are characterized in both the spatial and frequency domains. Since it is not clear how much of the error is contributed by each unit, the scanned input is statistically analyzed in the second stage called the corrected-print-error-stage. Finally, the described diagnostic algorithms output the estimated scan error and print error separately as RMS values of the displacement of the scan and print lines, respectively, from their nominal positions in the scanner or printer motion direction. We validate our test page design and approaches by ground truth obtained from a high-precision, chrome-on-glass reticle manufactured using semiconductor chip fabrication technologies.

[Reconstruction assisted by 3D printing in maxillofacial surgery].

PubMed

Ernoult, C; Bouletreau, P; Meyer, C; Aubry, S; Breton, P; Bachelet, J-T

2015-04-01

3-dimensional models (3D) appeared in the medical field 20 years ago. The recent development of consumer 3D printers explains the renewed interest in this technology. We describe the technical and practical modalities of this surgical tool, illustrated by concrete examples. The OsiriX(®) software (version 5.8.5, Geneva, Switzerland) was used for 3D surface reconstruction of the area of interest, the generation and export of ".stl" file. The NetFabb(®) software (Basic version 5.1.1, Lupburg, Germany) provided the preparation of ".stl" file. The 3D-printer was an Up plus 2 Easy 120(®) (PP3DP, Beijing Technology Co. TierTime Ltd., Chine). The printer used fused deposition modeling. The softwar Up!(®) allowed the 3d impression as required. The first case illustrated the value of 3D printing in the upper (frontal sinus and orbital roof). The second case concerned the preconfiguration of the osteosynthesis material for a complex fracture of the midface through the "mirroring" system. The third case showed the conformation of a prereconstruction for segmental mandibulectomy. Current 3D-printers are easy to use and represent a promising solution for medical prototyping. The 3D printing will quickly become undeniable because of its advantages: information sharing, simulation, surgical guides, pedagogy. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Customized cranioplasty implants using three-dimensional printers and polymethyl-methacrylate casting.

PubMed

Kim, Bum-Joon; Hong, Ki-Sun; Park, Kyung-Jae; Park, Dong-Hyuk; Chung, Yong-Gu; Kang, Shin-Hyuk

2012-12-01

The prefabrication of customized cranioplastic implants has been introduced to overcome the difficulties of intra-operative implant molding. The authors present a new technique, which consists of the prefabrication of implant molds using three-dimensional (3D) printers and polymethyl-methacrylate (PMMA) casting. A total of 16 patients with large skull defects (>100 cm(2)) underwent cranioplasty between November 2009 and April 2011. For unilateral cranial defects, 3D images of the skull were obtained from preoperative axial 1-mm spiral computed tomography (CT) scans. The image of the implant was generated by a digital subtraction mirror-imaging process using the normal side of the cranium as a model. For bilateral cranial defects, precraniectomy routine spiral CT scan data were merged with postcraniectomy 3D CT images following a smoothing process. Prefabrication of the mold was performed by the 3D printer. Intraoperatively, the PMMA implant was created with the prefabricated mold, and fit into the cranial defect. The median operation time was 184.36±26.07 minutes. Postoperative CT scans showed excellent restoration of the symmetrical contours and curvature of the cranium in all cases. The median follow-up period was 23 months (range, 14-28 months). Postoperative infection was developed in one case (6.2%) who had an open wound defect previously. Customized cranioplasty PMMA implants using 3D printer may be a useful technique for the reconstruction of various cranial defects.

Three-dimensional printing: technologies, applications, and limitations in neurosurgery.

PubMed

Pucci, Josephine U; Christophe, Brandon R; Sisti, Jonathan A; Connolly, Edward S

2017-09-01

Three-dimensional (3D) printers are a developing technology penetrating a variety of markets, including the medical sector. Since its introduction to the medical field in the late 1980s, 3D printers have constructed a range of devices, such as dentures, hearing aids, and prosthetics. With the ultimate goals of decreasing healthcare costs and improving patient care and outcomes, neurosurgeons are utilizing this dynamic technology, as well. Digital Imaging and Communication in Medicine (DICOM) can be translated into Stereolithography (STL) files, which are then read and methodically built by 3D Printers. Vessels, tumors, and skulls are just a few of the anatomical structures created in a variety of materials, which enable surgeons to conduct research, educate surgeons in training, and improve pre-operative planning without risk to patients. Due to the infancy of the field and a wide range of technologies with varying advantages and disadvantages, there is currently no standard 3D printing process for patient care and medical research. In an effort to enable clinicians to optimize the use of additive manufacturing (AM) technologies, we outline the most suitable 3D printing models and computer-aided design (CAD) software for 3D printing in neurosurgery, their applications, and the limitations that need to be overcome if 3D printers are to become common practice in the neurosurgical field. Copyright © 2017 Elsevier Inc. All rights reserved.

Consumer exposures to laser printer-emitted engineered nanoparticles: A case study of life-cycle implications from nano-enabled products.

PubMed

Pirela, Sandra V; Sotiriou, Georgios A; Bello, Dhimiter; Shafer, Martin; Bunker, Kristin Lee; Castranova, Vincent; Thomas, Treye; Demokritou, Philip

2015-01-01

It is well established that printers emit nanoparticles during their operation. To-date, however, the physicochemical and toxicological characterization of "real world" printer-emitted nanoparticles (PEPs) remains incomplete, hampering proper risk assessment efforts. Here, we investigate our earlier hypothesis that engineered nanomaterials (ENMs) are used in toners and ENMs are released during printing (consumer use). Furthermore, we conduct a detailed physicochemical and morphological characterization of PEPs in support of ongoing toxicological assessment. A comprehensive suite of state of the art analytical methods and tools was employed for the physicochemical and morphological characterization of 11 toners widely utilized in printers from major printer manufacturers and their PEPs. We confirmed that a number of ENMs incorporated into toner formulations (e.g. silica, alumina, titania, iron oxide, zinc oxide, copper oxide, cerium oxide, carbon black among others) and released into the air during printing. All evaluated toners contained large amounts of organic carbon (OC, 42-89%), metals/metal oxides (1-33%), and some elemental carbon (EC, 0.33-12%). The PEPs possess a composition similar to that of toner and contained 50-90% OC, 0.001-0.5% EC and 1-3% metals. While the chemistry of the PEPs generally reflected that of their toners, considerable differences are documented indicative of potential transformations taking place during consumer use (printing). We conclude that: (i) Routine incorporation of ENMs in toners classifies them as nano-enabled products (NEPs); (ii) These ENMs become airborne during printing; (iii) The chemistry of PEPs is complex and it reflects that of the toner and paper. This work highlights the importance of understanding life-cycle (LC) nano-EHS implications of NEPs and assessing real world exposures and associated toxicological properties rather than focusing on "raw" materials used in the synthesis of an NEP.

Consumer exposures to laser printer-emitted engineered nanoparticles: A case study of life-cycle implications from nano-enabled products

PubMed Central

Pirela, Sandra V.; Sotiriou, Georgios A.; Bello, Dhimiter; Shafer, Martin; Bunker, Kristin Lee; Castranova, Vincent; Thomas, Treye; Demokritou, Philip

2015-01-01

It is well established that printers emit nanoparticles during their operation. To-date, however, the physicochemical and toxicological characterization of “real world” printer-emitted nanoparticles (PEPs) remains incomplete, hampering proper risk assessment efforts. Here, we investigate our earlier hypothesis that engineered nanomaterials (ENMs) are used in toners and ENMs are released during printing (consumer use). Furthermore, we conduct a detailed physicochemical and morphological characterization of PEPs in support of ongoing toxicological assessment. A comprehensive suite of state of the art analytical methods and tools was employed for the physicochemical and morphological characterization of 11 toners widely utilized in printers from major printer manufacturers and their PEPs. We confirmed that a number of ENMs incorporated into toner formulations (e.g., silica, alumina, titania, iron oxide, zinc oxide, copper oxide, cerium oxide, carbon black among others) and released into the air during printing. All evaluated toners contained large amounts of organic carbon (OC, 42–89%), metals/metal oxides (1–33%), and some elemental carbon (EC, 0.33–12%). The PEPs possess a composition similar to that of toner and contained 50–90% OC, 0.001–0.5% EC and 1–3% metals. While the chemistry of the PEPs generally reflected that of their toners, considerable differences are documented indicative of potential transformations taking place during consumer use (printing). We conclude that: (i) Routine incorporation of ENMs in toners classifies them as nano-enabled products (NEPs); (ii) These ENMs become airborne during printing; (iii) The chemistry of PEPs is complex and it reflects that of the toner and paper. This work highlights the importance of understanding life-cycle (LC) nano-EHS implications of NEPs and assessing real world exposures and associated toxicological properties rather than focusing on “raw” materials used in the synthesis of an NEP. PMID:25387251

Graphics-Printing Program For The HP Paintjet Printer

NASA Technical Reports Server (NTRS)

Atkins, Victor R.

1993-01-01

IMPRINT utility computer program developed to print graphics specified in raster files by use of Hewlett-Packard Paintjet(TM) color printer. Reads bit-mapped images from files on UNIX-based graphics workstation and prints out three different types of images: wire-frame images, solid-color images, and gray-scale images. Wire-frame images are in continuous tone or, in case of low resolution, in random gray scale. In case of color images, IMPRINT also prints by use of default palette of solid colors. Written in C language.

Microhydraulic Electrowetting Actuators

DTIC Science & Technology

2015-06-26

inkjet  printers4, and microrobots5 tend to use other  forms of actuation.   The alternatives can be widely divided  into  resistive and capacitive...actuators, based on  the primary  impedance mode.   Some examples of  resistive actuators are  thermal  inkjet  printers, electro‐osmotic pumps6, and shape

Inertial Sensor Characterization for Inertial Navigation and Human Motion Tracking Applications

DTIC Science & Technology

2012-06-01

sensor to the pendulum. The time he took to design this part in SolidWorks so that I could have it printed on a 3D printer was greatly appreciated...I would also like to thank Daniel Sakoda for his quick turnaround in printing the mounting bracket using a 3D printer . Lastly, I would like to...sensors provide three-dimensional ( 3D ) orientation, acceleration, rate of turn, and magnetic field information. Manufacturers specify both static and

3D Printer Instrumentation to Create Varied Geometries of Robotic Limbs and Heterogeneous Granular Media

DTIC Science & Technology

2015-05-20

Transfer Robo Ant The 3D printer was used to rapidly prototype a robot ant . The robot ant was used to model the behavior of the fire ant and to model...computer models and 3D printed ant robots are shown below. Snake Bot We used the 3D printed to rapidly design a modular, easily-modified snake...living organism (modern mudskippers, a terrestrial fish) and extinct early tetrapods (e.g. Ichthyostega, Acanthostega) while allowing us to explore

Data communications in a parallel active messaging interface of a parallel computer

DOEpatents

Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2014-09-02

Eager send data communications in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI composed of data communications endpoints that specify a client, a context, and a task, including receiving an eager send data communications instruction with transfer data disposed in a send buffer characterized by a read/write send buffer memory address in a read/write virtual address space of the origin endpoint; determining for the send buffer a read-only send buffer memory address in a read-only virtual address space, the read-only virtual address space shared by both the origin endpoint and the target endpoint, with all frames of physical memory mapped to pages of virtual memory in the read-only virtual address space; and communicating by the origin endpoint to the target endpoint an eager send message header that includes the read-only send buffer memory address.

Data communications in a parallel active messaging interface of a parallel computer

DOEpatents

Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2014-09-16

Eager send data communications in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI composed of data communications endpoints that specify a client, a context, and a task, including receiving an eager send data communications instruction with transfer data disposed in a send buffer characterized by a read/write send buffer memory address in a read/write virtual address space of the origin endpoint; determining for the send buffer a read-only send buffer memory address in a read-only virtual address space, the read-only virtual address space shared by both the origin endpoint and the target endpoint, with all frames of physical memory mapped to pages of virtual memory in the read-only virtual address space; and communicating by the origin endpoint to the target endpoint an eager send message header that includes the read-only send buffer memory address.

Technology infusion of intellectual 3D printers-based prototyping of products into learning process

NASA Astrophysics Data System (ADS)

Boshhenko, T. V.; Chepur, P. V.

2018-03-01

The article considers the prospects for the technologies of intellectual design and prototyping applying 3D printers. It presents basic technologies of 3D printing, currently developed and released for construction. The experience of educational activities in the University to train students for the Academic Competitions on three-dimensional modeling and prototyping is described in the present article. Requirements for the prototyping implementation are given, allowing obtaining a positive effect from the technology infusion released for construction. The results of activities to train students for the Academic Competition are stated. It is established that the proposed approaches to the training of students have led to the highest score in the national contest in Novosibirsk when performing tasks for prototyping a stand for a cell phone and manufacturing the product on a 3D printer at the SLS technology, selective laser sintering. The conclusions about the possibilities and prospects of development of this direction in the industry in the entire country are drawn.

Fabrication of low cost soft tissue prostheses with the desktop 3D printer

NASA Astrophysics Data System (ADS)

He, Yong; Xue, Guang-Huai; Fu, Jian-Zhong

2014-11-01

Soft tissue prostheses such as artificial ear, eye and nose are widely used in the maxillofacial rehabilitation. In this report we demonstrate how to fabricate soft prostheses mold with a low cost desktop 3D printer. The fabrication method used is referred to as Scanning Printing Polishing Casting (SPPC). Firstly the anatomy is scanned with a 3D scanner, then a tissue casting mold is designed on computer and printed with a desktop 3D printer. Subsequently, a chemical polishing method is used to polish the casting mold by removing the staircase effect and acquiring a smooth surface. Finally, the last step is to cast medical grade silicone into the mold. After the silicone is cured, the fine soft prostheses can be removed from the mold. Utilizing the SPPC method, soft prostheses with smooth surface and complicated structure can be fabricated at a low cost. Accordingly, the total cost of fabricating ear prosthesis is about $30, which is much lower than the current soft prostheses fabrication methods.

Fabrication of low cost soft tissue prostheses with the desktop 3D printer

PubMed Central

He, Yong; Xue, Guang-huai; Fu, Jian-zhong

2014-01-01

Soft tissue prostheses such as artificial ear, eye and nose are widely used in the maxillofacial rehabilitation. In this report we demonstrate how to fabricate soft prostheses mold with a low cost desktop 3D printer. The fabrication method used is referred to as Scanning Printing Polishing Casting (SPPC). Firstly the anatomy is scanned with a 3D scanner, then a tissue casting mold is designed on computer and printed with a desktop 3D printer. Subsequently, a chemical polishing method is used to polish the casting mold by removing the staircase effect and acquiring a smooth surface. Finally, the last step is to cast medical grade silicone into the mold. After the silicone is cured, the fine soft prostheses can be removed from the mold. Utilizing the SPPC method, soft prostheses with smooth surface and complicated structure can be fabricated at a low cost. Accordingly, the total cost of fabricating ear prosthesis is about $30, which is much lower than the current soft prostheses fabrication methods. PMID:25427880

[3D printed medical devices and anatomical models: What kind of distribution and which uses in French hospitals?

PubMed

Pierreville, J; Serrano, C; van den Brink, H; Prognon, P; Pineau, J; Martelli, N

2018-03-01

3D printing plays an increasingly important role in the medical sector and particularly in surgery. Nowadays, numerous manufacturers benefit from this technology to produce their medical devices and some hospitals have also purchased 3D printers. In this context, the aim of the present study was to study the distribution and the use of 3D printing in French hospitals in order to its main features in surgery. By conducting a national survey, we targeted hospitals equipped with 3D printers and those using external providers to benefit from this technology. Forty-seven hospitals were identified as using 3D printing including eight equipped with in-house 3D printers. This work gives us a first picture of 3D printing for hospital use in France and it raises questions about hospital pharmacists' involvement in 3D printed medical device production. Copyright © 2017 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

An approach to detecting deliberately introduced defects and micro-defects in 3D printed objects

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2017-05-01

In prior work, Zeltmann, et al. demonstrated the negative impact that can be created by defects of various sizes in 3D printed objects. These defects may make the object unsuitable for its application or even present a hazard, if the object is being used for a safety-critical application. With the uses of 3D printing proliferating and consumer access to printers increasing, the desire of a nefarious individual or group to subvert the desired printing quality and safety attributes of a printer or printed object must be considered. Several different approaches to subversion may exist. Attackers may physically impair the functionality of the printer or launch a cyber-attack. Detecting introduced defects, from either attack, is critical to maintaining public trust in 3D printed objects and the technology. This paper presents an alternate approach. It applies a quality assurance technology based on visible light sensing to this challenge and assesses its capability for detecting introduced defects of multiple sizes.

A three-dimensional bioprinting system for use with a hydrogel-based biomaterial and printing parameter characterization.

PubMed

Song, Seung-Joon; Choi, Jaesoon; Park, Yong-Doo; Lee, Jung-Joo; Hong, So Young; Sun, Kyung

2010-11-01

Bioprinting is an emerging technology for constructing tissue or bioartificial organs with complex three-dimensional (3D) structures. It provides high-precision spatial shape forming ability on a larger scale than conventional tissue engineering methods, and simultaneous multiple components composition ability. Bioprinting utilizes a computer-controlled 3D printer mechanism for 3D biological structure construction. To implement minimal pattern width in a hydrogel-based bioprinting system, a study on printing characteristics was performed by varying printer control parameters. The experimental results showed that printing pattern width depends on associated printer control parameters such as printing flow rate, nozzle diameter, and nozzle velocity. The system under development showed acceptable feasibility of potential use for accurate printing pattern implementation in tissue engineering applications and is another example of novel techniques for regenerative medicine based on computer-aided biofabrication system. © 2010, Copyright the Authors. Artificial Organs © 2010, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Fabrication of low cost soft tissue prostheses with the desktop 3D printer.

PubMed

He, Yong; Xue, Guang-huai; Fu, Jian-zhong

2014-11-27

Soft tissue prostheses such as artificial ear, eye and nose are widely used in the maxillofacial rehabilitation. In this report we demonstrate how to fabricate soft prostheses mold with a low cost desktop 3D printer. The fabrication method used is referred to as Scanning Printing Polishing Casting (SPPC). Firstly the anatomy is scanned with a 3D scanner, then a tissue casting mold is designed on computer and printed with a desktop 3D printer. Subsequently, a chemical polishing method is used to polish the casting mold by removing the staircase effect and acquiring a smooth surface. Finally, the last step is to cast medical grade silicone into the mold. After the silicone is cured, the fine soft prostheses can be removed from the mold. Utilizing the SPPC method, soft prostheses with smooth surface and complicated structure can be fabricated at a low cost. Accordingly, the total cost of fabricating ear prosthesis is about $30, which is much lower than the current soft prostheses fabrication methods.

Development of paper-based microfluidic analytical device for iron assay using photomask printed with 3D printer for fabrication of hydrophilic and hydrophobic zones on paper by photolithography.

PubMed

Asano, Hitoshi; Shiraishi, Yukihide

2015-07-09

This paper describes a paper-based microfluidic analytical device for iron assay using a photomask printed with a 3D printer for fabrication of hydrophilic and hydrophobic zones on the paper by photolithography. Several designed photomasks for patterning paper-based microfluidic analytical devices can be printed with a 3D printer easily, rapidly and inexpensively. A chromatography paper was impregnated with the octadecyltrichlorosilane n-hexane solution and hydrophobized. After the hydrophobic zone of the paper was exposed to the UV light through the photomask, the hydrophilic zone was generated. The smallest functional hydrophilic channel and hydrophobic barrier were ca. 500 μm and ca. 100 μm in width, respectively. The fabrication method has high stability, resolution and precision for hydrophilic channel and hydrophobic barrier. This test paper was applied to the analysis of iron in water samples using a colorimetry with phenanthroline. Copyright © 2015 Elsevier B.V. All rights reserved.

Physiographic rim of the Grand Canyon, Arizona: a digital database

USGS Publications Warehouse

Billingsley, George H.; Hampton, Haydee M.

1999-01-01

This Open-File report is a digital physiographic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. The report does include, however, PostScript and PDF format plot files, each containing an image of the map. For those interested in a paper plot of information contained in the database or in obtaining the PostScript plot files, please see the section entitled "For Those Who Don't Use Digital Geologic Map Databases" below. This physiographic map of the Grand Canyon is modified from previous versions by Billingsley and Hendricks (1989), and Billingsley and others (1997). The boundary is drawn approximately along the topographic rim of the Grand Canyon and its tributary canyons between Lees Ferry and Lake Mead (shown in red). Several isolated small mesas, buttes, and plateaus are within this area, which overall encompasses about 2,600 square miles. The Grand Canyon lies within the southwestern part of the Colorado Plateaus of northern Arizona between Lees Ferry, Colorado River Mile 0, and Lake Mead, Colorado River Mile 277. The Colorado River is the corridor for raft trips through the Grand Canyon. Limestone rocks of the Kaibab Formation form most of the north and south rims of the Grand Canyon, and a few volcanic rocks form the north rim of parts of the Uinkaret and Shivwits Plateaus. Limestones of the Redwall Limestone and lower Supai Group form the rim of the Hualapai Plateau area, and Limestones of Devonian and Cambrian age form the boundary rim near the mouth of Grand Canyon at the Lake Mead. The natural physiographic boundary of the Grand Canyon is roughly the area a visitor would first view any part of the Grand Canyon and its tributaries.

Geologic map of the Devore 7.5' quadrangle, San Bernardino County, California

USGS Publications Warehouse

Morton, Douglas M.; Matti, Jonathan C.

2001-01-01

This Open-File Report contains a digital geologic map database of the Devore 7.5' quadrangle, San Bernardino County, California, that includes: 1. ARC/INFO (Environmental Systems Research Institute) version 7.2.1 coverages of the various components of the geologic map 2. A PostScript (.ps) file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram, a Description of Map Units, an index map, and a regional structure map 3. Portable Document Format (.pdf) files of: a. This Readme; includes an Appendix, containing metadata details found in devre_met.txt b. The same graphic as plotted in 2 above. (Test plots from this .pdf do not produce 1:24,000-scale maps. Adobe Acrobat page-size settings control map scale.) The Correlation of Map Units and Description of Map Units are in the editorial format of USGS Miscellaneous Investigations Series maps (I-maps) but have not been edited to comply with I-map standards. Within the geologic-map data package, map units are identified by such standard geologic-map criteria as formation name, age, and lithology. Even though this is an author-prepared report, every attempt has been made to closely adhere to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above). If roads in some areas, especially forest roads that parallel topographic contours, do not show well on plots of the geologic map, we recommend use of the USGS Devore 7.5’ topographic quadrangle in conjunction with the geologic map.

Geologic map of the Fifteenmile Valley 7.5' quadrangle, San Bernardino County, California

USGS Publications Warehouse

Miller, F.K.; Matti, J.C.

2001-01-01

Open-File Report OF 01-132 contains a digital geologic map database of the Fifteenmile Valley 7.5’ quadrangle, San Bernardino County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A PostScript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram, a Description of Map Units, an index map, and a regional structure map. 3. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in fif_met.txt b. The same graphic as plotted in 2 above. (Test plots have not produced 1:24,000-scale map sheets. Adobe Acrobat pagesize setting influences map scale.) The Correlation of Map Units (CMU) and Description of Map Units (DMU) is in the editorial format of USGS Miscellaneous Investigations Series (I-series) maps. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Even though this is an author-prepared report, every attempt has been made to closely adhere to the stratigraphic nomenclature of the U. S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above). If roads in some areas, especially forest roads that parallel topographic contours, do not show well on plots of the geologic map, we recommend use of the USGS Fifteenmile Valley 7.5’ topographic quadrangle in conjunction with the geologic map.

Customized Cranioplasty Implants Using Three-Dimensional Printers and Polymethyl-Methacrylate Casting

PubMed Central

Kim, Bum-Joon; Hong, Ki-Sun; Park, Kyung-Jae; Park, Dong-Hyuk; Chung, Yong-Gu

2012-01-01

Objective The prefabrication of customized cranioplastic implants has been introduced to overcome the difficulties of intra-operative implant molding. The authors present a new technique, which consists of the prefabrication of implant molds using three-dimensional (3D) printers and polymethyl-methacrylate (PMMA) casting. Methods A total of 16 patients with large skull defects (>100 cm2) underwent cranioplasty between November 2009 and April 2011. For unilateral cranial defects, 3D images of the skull were obtained from preoperative axial 1-mm spiral computed tomography (CT) scans. The image of the implant was generated by a digital subtraction mirror-imaging process using the normal side of the cranium as a model. For bilateral cranial defects, precraniectomy routine spiral CT scan data were merged with postcraniectomy 3D CT images following a smoothing process. Prefabrication of the mold was performed by the 3D printer. Intraoperatively, the PMMA implant was created with the prefabricated mold, and fit into the cranial defect. Results The median operation time was 184.36±26.07 minutes. Postoperative CT scans showed excellent restoration of the symmetrical contours and curvature of the cranium in all cases. The median follow-up period was 23 months (range, 14-28 months). Postoperative infection was developed in one case (6.2%) who had an open wound defect previously. Conclusion Customized cranioplasty PMMA implants using 3D printer may be a useful technique for the reconstruction of various cranial defects. PMID:23346326

Field power measurements of imaging equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

McWhinney, Marla; Homan, Gregory; Brown, Richard

2004-05-14

According to the U.S. Department of Energy, electricity use by non-PC commercial office equipment is growing at an annual rate of nearly 5 percent (AEO 2003). To help address this growth in consumption, U.S. EPA periodically updates its ENERGY STAR specifications as products and markets change. This report presents background research conducted to help EPA update the ENERGY STAR specification for imaging equipment, which covers printers, fax machines, copiers, scanners, and multifunction devices (MFDs). We first estimated the market impact of the current ENERGY STAR imaging specification, finding over 90 percent of the current market complies with the specification. Wemore » then analyzed a sample of typical new imaging products, including 11 faxes, 57 printers and 19 copiers/MFD. For these devices we metered power levels in the most common modes: active/ready/sleep/off, and recorded features that would most likely affect energy consumption. Our metering indicates that for many products and speed bins, current models consume substantially less power than the current specification. We also found that for all product categories, power consumption varied most considerably across technology (i.e. inkjet vs. laser). Although inkjet printers consumed less energy than laser printers in active, ready and sleep-mode, they consumed more power on average while off, mostly due to the use of external power supplies. Based on these findings, we developed strategies for the ENERGY STAR program to achieve additional energy reductions. Finally, we present an assessment of manufacturer's ENERGY STAR labeling practices.« less

Development of an AFIT (Air Force Institute of Technology) ADP System Network Model.

DTIC Science & Technology

1983-12-01

printers. Lastly, after a batch event finishes ’printing’, the turnaround time for each computer and loca- tion may be collected. Resource Module. The...9)), + (IJOBSA(10)) ,(IORG,A( 12)) ,(,AEi4A( 13)) C CNNNN IF JOB JUST FINISHED CPU OR PRINTER IN WAIT MODE THEN SCHEDULE C**** THINK TINE C IF...Modules: CPUAIJ I C Scheduled by. none C C FUNCTION XIOSEC(ICLASSISIZE) P RAMETER (1AXCLS=6,WAXSIZ-6) C -’. CMII COPtION BLOCKS COtON /FACTOR/ DI STRB

A computer system for the storage and retrieval of gravity data, Kingdom of Saudi Arabia

USGS Publications Warehouse

Godson, Richard H.; Andreasen, Gordon H.

1974-01-01

A computer system has been developed for the systematic storage and retrieval of gravity data. All pertinent facts relating to gravity station measurements and computed Bouguer values may be retrieved either by project name or by geographical coordinates. Features of the system include visual display in the form of printer listings of gravity data and printer plots of station locations. The retrieved data format interfaces with the format of GEOPAC, a system of computer programs designed for the analysis of geophysical data.

Manufacturing of polylactic acid nanocomposite 3D printer filaments for smart textile applications

NASA Astrophysics Data System (ADS)

Hashemi Sanatgar, R.; Cayla, A.; Campagne, C.; Nierstrasz, V.

2017-10-01

In this paper, manufacturing of polylactic acid nanocomposite 3D printer filaments was considered for smart textile applications. 3D printing process was applied as a novel process for deposition of nanocomposites on PLA fabrics to introduce more flexible, resourceefficient and cost effective textile functionalization processes than conventional printing process like screen and inkjet printing. The aim is to develop an integrated or tailored production process for smart and functional textiles which avoid unnecessary use of water, energy, chemicals and minimize the waste to improve ecological footprint and productivity.

Technical Directions In High Resolution Non-Impact Printers

NASA Astrophysics Data System (ADS)

Dunn, S. Thomas; Dunn, Patrice M.

1987-04-01

There are several factors to consider when addressing the issue of non-impact printer resolution. One will find differences between the imaging resolution and the final output resolution, and most assuradly differences exist between the advertised and actual resolution of many of these systems. Beyond that some of the technical factors that effect the resolution of a system in-clude: . Scan Line Density . Overlap . Spot Size . Energy Profile . Symmetry of Imaging Generally speaking, the user of graphic arts equipment, is best advised to view output to determine the degree of acceptable quality.

Proceedings, 15th Annual Meeting, Aquatic Plant Control Research Planning and Operations Review, held 17-20 November 1980, Savannah, Georgia.

DTIC Science & Technology

1981-10-01

transmitter/ receiver (the AGNAV guidance system), a TI - 59 programmable calculator with a TI PC-1O0 thermal printer and direct current (DC) to alternating...the TI - 59 programmable calculator mounted on the TI PC-100 thermal printer and the 12-v DC to 120-v AC inverter. Power for both the mobile and...dropped, the new A2 B2 distances are keyed into the calculator, and * Magnetic cards, readable on a TI - 59 programmable calculator , with all programs

Compendium of Shock Wave Data. Volume 1. Revision 1. Introduction. Section A1-Elements

DTIC Science & Technology

1977-06-01

the limited character list of the automatic printer that produced these pages. Therefore, V0 is written as VO, Ci as CL, etc. While the above...14-1 Sodium carbonate Na 2 CO3 99-23-1 Note that the automatic printer used for the data pages is restricted to capital letters, so that the molecular...SILICON St O.Z5 WT PERCENT MAX. IRON FE 0.35 - - - 4 COPPER Cu 0.05 - - - ( MANGANESE MN 0.03 - - - MAGNESIUM Ŕ 0.03 - - - ZINK ZN 0.05 - - - TITANIUM

Improved NASTRAN plotting

NASA Technical Reports Server (NTRS)

Chan, Gordon C.

1991-01-01

The new 1991 COSMIC/NASTRAN version, compatible with the older versions, tries to remove some old constraints and make it easier to extract information from the plot file. It also includes some useful improvements and new enhancements. New features available in the 1991 version are described. They include a new PLT1 tape with simplified ASCII plot commands and short records, combined hidden and shrunk plot, an x-y-z coordinate system on all structural plots, element offset plot, improved character size control, improved FIND and NOFIND logic, a new NASPLOT post-prosessor to perform screen plotting or generate PostScript files, and a BASIC/NASTPLOT program for PC.

Binary-mask generation for diffractive optical elements using microcomputers.

PubMed

O'Shea, D C; Beletic, J W; Poutous, M

1993-05-10

A new technique for generation of binary masks for the fabrication of diffractive optical elements is investigated. This technique, which uses commercially available desktop-publishing hardware and software in conjunction with a standard photoreduction camera, is much faster and less expensive thanhe conventional methods. The short turnaround time and low cost should give researchers a much greater degree of flexibility in the field of binary optics and enable wider application of diffractive-optics technology. Techniques for generating optical elements by using standard software packages that produce PostScript output are described. An evaluation of the dimensional fidelity of the mask reproduction from design to its realization in photoresist is presented.

The Origin of Gravitational Lensing: A Postscript to Einstein's 1936 Science Paper

PubMed

Renn; Sauer; Stachel

1997-01-10

Gravitational lensing, now taken as an important astrophysical consequence of the general theory of relativity, was found even before this theory was formulated but was discarded as a speculative idea without any chance of empirical confirmation. Reconstruction of some of Einstein's research notes dating back to 1912 reveals that he explored the possibility of gravitational lensing 3 years before completing his general theory of relativity. On the basis of preliminary insights into this theory, Einstein had already derived the basic features of the lensing effect. When he finally published the very same results 24 years later, it was only in response to prodding by an amateur scientist.

Preliminary geologic map of the Fontana 7.5' quadrangle, Riverside and San Bernardino Counties, California

USGS Publications Warehouse

Morton, Douglas M.; Digital preparation by Bovard, Kelly R.

2003-01-01

Open-File Report 03-418 is a digital geologic data set that maps and describes the geology of the Fontana 7.5’ quadrangle, Riverside and San Bernardino Counties, California. The Fontana quadrangle database is one of several 7.5’ quadrangle databases that are being produced by the Southern California Areal Mapping Project (SCAMP). These maps and databases are, in turn, part of the nation-wide digital geologic map coverage being developed by the National Cooperative Geologic Map Program of the U.S. Geological Survey (USGS). General Open-File Report 03-418 contains a digital geologic map database of the Fontana 7.5’ quadrangle, Riverside and San Bernardino Counties, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file (fon_map.ps) to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. An Encapsulated PostScript (EPS) file (fon_grey.eps) created in Adobe Illustrator 10.0 to plot the geologic map on a grey topographic base, and containing a Correlation of Map Units (CMU), a Description of Map Units (DMU), and an index map. 4. Portable Document Format (.pdf) files of: a. the Readme file; includes in Appendix I, data contained in fon_met.txt b. The same graphics as plotted in 2 and 3 above.Test plots have not produced precise 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (4b above) or plotting the postscript files (2 or 3 above).

Print quality analysis for ink-saving algorithms

NASA Astrophysics Data System (ADS)

Ortiz Segovia, Maria V.; Bonnier, Nicolas; Allebach, Jan P.

2012-01-01

Ink-saving strategies for CMYK printers have evolved from their earlier stages where the 'draft' print mode was the main option available to control ink usage. The savings were achieved by printing alternate dots in an image at the expense of reducing print quality considerably. Nowadays, customers are not only unwilling to compromise quality but have higher expectations regarding both visual print quality and ink reduction solutions. Therefore, the need for more intricate ink-saving solutions with lower impact on print quality is evident. Printing-related factors such as the way the printer places the dots on the paper and the ink-substrate interaction play important and complex roles in the characterization and modeling of the printing process that make the ink reduction topic a challenging problem. In our study, we are interested in benchmarking ink-saving algorithms to find the connections between different ink reduction levels of a given ink-saving method and a set of print quality attributes. This study is mostly related to CMYK printers that use dispersed dot halftoning algorithms. The results of our efforts to develop such an evaluation scheme are presented in this paper.

Print-to-pattern dry film photoresist lithography

NASA Astrophysics Data System (ADS)

Garland, Shaun P.; Murphy, Terrence M., Jr.; Pan, Tingrui

2014-05-01

Here we present facile microfabrication processes, referred to as print-to-pattern dry film photoresist (DFP) lithography, that utilize the combined advantages of wax printing and DFP to produce micropatterned substrates with high resolution over a large surface area in a non-cleanroom setting. The print-to-pattern methods can be performed in an out-of-cleanroom environment making microfabrication much more accessible to minimally equipped laboratories. Two different approaches employing either wax photomasks or wax etchmasks from a solid ink desktop printer have been demonstrated that allow the DFP to be processed in a negative tone or positive tone fashion, respectively, with resolutions of 100 µm. The effect of wax melting on resolution and as a bonding material was also characterized. In addition, solid ink printers have the capacity to pattern large areas with high resolution, which was demonstrated by stacking DFP layers in a 50 mm × 50 mm woven pattern with 1 mm features. By using an office printer to generate the masking patterns, the mask designs can be easily altered in a graphic user interface to enable rapid prototyping.

The Influence of Internal Structures in Fused Deposition Modeling Method on Dimensional Accuracy of Components

NASA Astrophysics Data System (ADS)

Milde, Ján; Morovič, Ladislav

2016-09-01

The paper investigates the influence of infill (internal structures of components) in the Fused Deposition Modeling (FDM) method on dimensional and geometrical accuracy of components. The components in this case were real models of human mandible, which were obtained by Computed Tomography (CT) mostly used in medical applications. In the production phase, the device used for manufacturing, was a 3D printer Zortrax M200 based on the FDM technology. In the second phase, the mandibles made by the printer, were digitized using optical scanning device of GOM ATOS Triple Scan II. They were subsequently evaluated in the final phase. The practical part of this article describes the procedure of jaw model modification, the production of components using a 3D printer, the procedure of digitization of printed parts by optical scanning device and the procedure of comparison. The outcome of this article is a comparative analysis of individual printed parts, containing tables with mean deviations for individual printed parts, as well as tables for groups of printed parts with the same infill parameter.

Establishment of gel materials with different mechanical properties by 3D gel printer SWIM-ER

NASA Astrophysics Data System (ADS)

Ota, Takafumi; Tase, Taishi; Okada, Koji; Saito, Azusa; Takamatsu, Kyuuichiro; Kawakami, Masaru; Furukawa, Hidemitsu

2016-04-01

A 3D printer is a device which can directly produce objects whose shape is the same as the original 3D digital data. Hydrogels have unique properties such as high water content, low frictional properties, biocompatibility, material permeability and high transparency, which are rare in hard and dry materials. These superior characteristics of gels promise useful medical applications. We have been working on the development of a 3D gel printer, SWIM-ER (Soft and Wet Industrial - Easy Realizer), which can make models of organs and artificial blood vessels with gel material. However, 3D printing has a problem: the mechanical properties of the printed object vary depending on printing conditions, and this matter was investigated with SWIM-ER. In the past, we found that mechanical properties of 3D gel objects depend on the deposition orientation in SWIM-ER. In this study, gels were printed with different laser scanning speeds. The mechanical properties of these gels were investigated by compression tests, water content measurements and SMILS (Scanning Microscopic Light Scattering).

Development of three-axis inkjet printer for gear sensors

NASA Astrophysics Data System (ADS)

Iba, Daisuke; Rodriguez Lopez, Ricardo; Kamimoto, Takahiro; Nakamura, Morimasa; Miura, Nanako; Iizuka, Takashi; Masuda, Arata; Moriwaki, Ichiro; Sone, Akira

2016-04-01

The long-term objective of our research is to develop sensor systems for detection of gear failure signs. As a very first step, this paper proposes a new method to create sensors directly printed on gears by a printer and conductive ink, and shows the printing system configuration and the procedure of sensor development. The developing printer system is a laser sintering system consisting of a laser and CNC machinery. The laser is able to synthesize micro conductive patterns, and introduced to the CNC machinery as a tool. In order to synthesize sensors on gears, we first design the micro-circuit pattern on a gear through the use of 3D-CAD, and create a program (G-code) for the CNC machinery by CAM. This paper shows initial experiments with the laser sintering process in order to obtain the optimal parameters for the laser setting. This new method proposed here may provide a new manufacturing process for mechanical parts, which have an additional functionality to detect failure, and possible improvements include creating more economical and sustainable systems.

Design and Production of an Articulating Needle Guide for Ultrasound-Guided Needle Block Manufactured With a Three-Dimensional Printer: Technical Communication.

PubMed

Bigeleisen, Paul E

2017-05-15

Needle guides may allow the practitioner to align the needle with the probe when ultrasound-guided nerve block is performed. The author's goal was to design and fabricate an inexpensive ($1.90), disposable, needle guide that could articulate over a range from 85 degrees to 0 degrees with a three-dimension printer. Three-dimensional representations of an L50, L25, and C 60 ultrasound probe (Sono Site, Bothell, WA) were created using a laser scanner. Computer-aided design software (Solid Works, Waltham, MA) was used to design a needle bracket and needle guide to attach to these probes. A three-dimensional printer was used to fabricate the needle bracket and guide with acrylonitrile polybutadiene polystyrene. An echogenic needle was held in plane with the needle guide. The author performed a supraclavicular block in a morbidly obese patient. The needle was easily visualized. Similar guides that are commercially available cost as much as $400. A knowledge of computer-aided design is necessary for this work.

Characterisation and materials flow management for waste electrical and electronic equipment plastics from German dismantling centres.

PubMed

Arends, Dagmar; Schlummer, Martin; Mäurer, Andreas; Markowski, Jens; Wagenknecht, Udo

2015-09-01

Waste electrical and electronic equipment is a complex waste stream and treatment options that work for one waste category or product may not be appropriate for others. A comprehensive case study has been performed for plastic-rich fractions that are treated in German dismantling centres. Plastics from TVs, monitors and printers and small household appliances have been characterised extensively. Based on the characterisation results, state-of-the-art treatment technologies have been combined to design an optimised recycling and upgrade process for each input fraction. High-impact polystyrene from TV casings that complies with the European directive on the restriction of hazardous substances (RoHS) was produced by applying continuous density separation with yields of about 60%. Valuable acrylonitrile butadiene styrene/polycarbonate can be extracted from monitor and printer casings by near-infrared-based sorting. Polyolefins and/or a halogen-free fraction of mixed styrenics can be sorted out by density separation from monitors and printers and small household appliances. Emerging separation technologies are discussed to improve recycling results. © The Author(s) 2015.

Open-Source Syringe Pump Library

PubMed Central

Wijnen, Bas; Hunt, Emily J.; Anzalone, Gerald C.; Pearce, Joshua M.

2014-01-01

This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory. A syringe pump was designed using freely available open-source computer aided design (CAD) software and manufactured using an open-source RepRap 3-D printer and readily available parts. The design, bill of materials and assembly instructions are globally available to anyone wishing to use them. Details are provided covering the use of the CAD software and the RepRap 3-D printer. The use of an open-source Rasberry Pi computer as a wireless control device is also illustrated. Performance of the syringe pump was assessed and the methods used for assessment are detailed. The cost of the entire system, including the controller and web-based control interface, is on the order of 5% or less than one would expect to pay for a commercial syringe pump having similar performance. The design should suit the needs of a given research activity requiring a syringe pump including carefully controlled dosing of reagents, pharmaceuticals, and delivery of viscous 3-D printer media among other applications. PMID:25229451

Characterization of ABS specimens produced via the 3D printing technology for drone structural components

NASA Astrophysics Data System (ADS)

Ferro, Carlo Giovanni; Brischetto, Salvatore; Torre, Roberto; Maggiore, Paolo

2016-07-01

The Fused Deposition Modelling (FDM) technology is widely used in rapid prototyping. 3D printers for home desktop applications are usually employed to make non-structural objects. When the mechanical stresses are not excessive, this technology can also be successfully employed to produce structural objects, not only in prototyping stage but also in the realization of series pieces. The innovative idea of the present work is the application of this technology, implemented in a desktop 3D printer, to the realization of components for aeronautical use, especially for unmanned aerial systems. For this purpose, the paper is devoted to the statistical study of the performance of a desktop 3D printer to understand how the process performs and which are the boundary limits of acceptance. Mechanical and geometrical properties of ABS (Acrylonitrile Butadiene Styrene) specimens, such as tensile strength and stiffness, have been evaluated. ASTM638 type specimens have been used. A capability analysis has been applied for both mechanical and dimensional performances. Statistically stable limits have been determined using experimentally collected data.

Design and Fabrication of an Experimental Microheater Array Powder Sintering Printer

NASA Astrophysics Data System (ADS)

Holt, Nicholas; Zhou, Wenchao

2018-03-01

Microheater array powder sintering (MAPS) is a novel additive manufacturing process that uses an array of microheaters to selectively sinter powder particles. MAPS shows great promise as a new method of printing flexible electronics by enabling digital curing of conductive inks on a variety of substrates. For MAPS to work effectively, a microscale air gap needs to be maintained between the heater array and the conductive ink. In this article, we present an experimental MAPS printer with air gap control for printing conductive circuits. First, we discuss design aspects necessary to implement MAPS. An analysis is performed to validate that the design can maintain the desired air gap between the microheaters and the sintering layer, which consists of a silver nanoparticle ink. The printer is tested by printing conductive lines on a flexible plastic substrate with silver nanoparticle ink. Results show MAPS performs on par with or better than the existing fabrication methods for printed electronics in terms of both the print quality (conductivity of the printed line) and print speed, which shows MAPS' great promise as a competitive new method for digital production of printed electronics.

The feasibility study on fabrication customized orthotic insole using fused deposition modelling (FDM)

NASA Astrophysics Data System (ADS)

Yarwindran, M.; Ibrahim, M.; Raveverma, P.

2017-04-01

There are many important roles of the orthotic insoles, such as for the convenience purpose of diabetic patient's foot problem, and also to enhance athlete's performance in sports. Therefore, highly customised insoles were in demand, where it has to be fabricated by moulding plaster of Paris on the person's leg to customise the insole. The main purpose of the paper is to study the ability to implement additive manufacturing technology in the fabrication process of customised orthotics insole. The recent invention of flexible material (Filaflex) in Fused Deposition Modelling is the most significant reason that makes this fabrication process possible. By implementing a new approach to the 3D scanning of the foot, we produced the computer-aided drafting (CAD) drawing which was able to modify to desired shape and dimension. After the editing has been completed, the file was converted to Stereolithography format file (STL) as to enable it to be printed using Makerware or any other related software by sending command (G-code) to Flashforge 3D printer. The printed insole was tested its fit, form and function (also known as 3F). In the end, printed insole performs the function test which measures the plantar pressure of the foot compared with bare foot. The results show that the insole distributes pressure well throughout the foot surface, in which it reduced the peak pressure to half from 218KPa to 109KPa. Hence, it is concluded that the method proposed in this paper can produce a functional insole so that it can be the alternative way to make customised orthotic insoles.

Fire Alarm Wallpaper Based on Fire-Resistant Hydroxyapatite Nanowire Inorganic Paper and Graphene Oxide Thermosensitive Sensor.

PubMed

Chen, Fei-Fei; Zhu, Ying-Jie; Chen, Feng; Dong, Li-Ying; Yang, Ri-Long; Xiong, Zhi-Chao

2018-04-24

Wallpaper with multiple functions, such as fire resistance and an automatic alarm in fire disasters, will be attractive for the interior decoration of houses. Herein, we report a smart fire alarm wallpaper prepared using fire-resistant inorganic paper based on ultralong hydroxyapatite nanowires (HNs) and graphene oxide (GO) thermosensitive sensors. At room temperature, the GO thermosensitive sensor is in a state of electrical insulation; however, it becomes electrically conductive at high temperatures. In a fire disaster, high temperature will rapidly remove the oxygen-containing groups of GO, leading to the transformation process of GO from an electrically insulated state into an electrically conductive one. In this way, the alarm lamp and alarm buzzer connected with the GO thermosensitive sensor will send out the alerts to people immediately for taking emergency actions. After the surface modification with polydopamine of GO (PGO), the sensitivity and flame retardancy of the GO thermosensitive sensor are further improved, resulting in a low responsive temperature (126.9 °C), fast response (2 s), and sustained working time in the flame (at least 5 min). Compared with combustible commercial wallpaper, the smart fire alarm wallpaper based on HNs and GO (or PGO) is superior owing to excellent nonflammability and high-temperature resistance of HNs, which can protect the GO (or PGO) thermosensitive sensor from the flames. The smart fire alarm wallpaper can be processed into various shapes, dyed with different colors, and printed with the commercial printer and thus has promising applications in high-safety interior decoration of houses.

Increasing security in inter-chip communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, Nathan J.; Hamlet, Jason; Bauer, Todd

An apparatus for increasing security in inter-chip communication includes a sending control module, a communication bus, and a receiving control module. The communication bus is coupled between the sending control module and the receiving control module. The sending control module operates to send data on the communication bus, disable the communication bus when threats are detected, or both.

Increasing security in inter-chip communication

DOEpatents

Edwards, Nathan J; Hamlet, Jason; Bauer, Todd; Helinski, Ryan

2014-10-28

An apparatus for increasing security in inter-chip communication includes a sending control module, a communication bus, and a receiving control module. The communication bus is coupled between the sending control module and the receiving control module. The sending control module operates to send data on the communication bus, disable the communication bus when threats are detected, or both.

An inkjet-printed microfluidic device for liquid-liquid extraction.

PubMed

Watanabe, Masashi

2011-04-07

A microfluidic device for liquid-liquid extraction was quickly produced using an office inkjet printer. An advantage of this method is that normal end users, who are not familiar with microfabrication, can produce their original microfluidic devices by themselves. In this method, the printer draws a line on a hydrophobic and oil repellent surface using hydrophilic ink. This line directs a fluid, such as water or xylene, to form a microchannel along the printed line. Using such channels, liquid-liquid extraction was successfully performed under concurrent and countercurrent flow conditions. © The Royal Society of Chemistry 2011

Implementation of Non-Destructive Evaluation and Process Monitoring in DLP-based Additive Manufacturing

NASA Astrophysics Data System (ADS)

Kovalenko, Iaroslav; Verron, Sylvain; Garan, Maryna; Šafka, Jiří; Moučka, Michal

2017-04-01

This article describes a method of in-situ process monitoring in the digital light processing (DLP) 3D printer. It is based on the continuous measurement of the adhesion force between printing surface and bottom of a liquid resin bath. This method is suitable only for the bottom-up DPL printers. Control system compares the force at the moment of unsticking of printed layer from the bottom of the tank, when it has the largest value in printing cycle, with theoretical value. Implementation of suggested algorithm can make detection of faults during the printing process possible.

Color quality management in advanced flat panel display engines

NASA Astrophysics Data System (ADS)

Lebowsky, Fritz; Neugebauer, Charles F.; Marnatti, David M.

2003-01-01

During recent years color reproduction systems for consumer needs have experienced various difficulties. In particular, flat panels and printers could not reach a satisfactory color match. The RGB image stored on an Internet server of a retailer did not show the desired colors on a consumer display device or printer device. STMicroelectronics addresses this important color reproduction issue inside their advanced display engines using novel algorithms targeted for low cost consumer flat panels. Using a new and genuine RGB color space transformation, which combines a gamma correction Look-Up-Table, tetrahedrization, and linear interpolation, we satisfy market demands.

Construction of high-density bacterial colony arrays and patterns by the ink-jet method.

PubMed

Xu, Tao; Petridou, Sevastioni; Lee, Eric H; Roth, Elizabeth A; Vyavahare, Narendra R; Hickman, James J; Boland, Thomas

2004-01-05

We have developed a method for fabricating bacterial colony arrays and complex patterns using commercially available ink-jet printers. Bacterial colony arrays with a density of 100 colonies/cm(2) were obtained by directly ejecting Escherichia coli (E. coli) onto agar-coated substrates at a rapid arraying speed of 880 spots per second. Adjusting the concentration of bacterial suspensions allowed single colonies of viable bacteria to be obtained. In addition, complex patterns of viable bacteria as well as bacteria density gradients were constructed using desktop printers controlled by a simple software program. Copyright 2003 Wiley Periodicals, Inc.

Continuous Photoprocessing/Photoprocessing Control Career Ladders, AFSCs 23330, 23350, 23370, 23331, 23371, and 23399.

DTIC Science & Technology

1981-04-01

J AFLC AFSC L~-ATC L_ ESC* N~Q USAF R a ±1MAC [ PACAF SAC TAC USAFA USAPE OTHER UNIT ORt ORGANIZATION (Not wirde, Major CowsnedL. IF "OTHER UNIT...Print Filters 88. Printers Model D, 35= 89. Printers Model J , 16= CODE 99 xiv • CDC ID AFS 233XO/X1 m .CX DC3DC1DC1DCD BACKGROUND INFORMATION (CONTINUED...BACKGROUND INFORMATION (CONTINUED) BLACN CIRCLE (1) TO TH RIGHT OF = EACH RESNS-E YOU ISH TO INDICATE . Tacky oller Cleaners 0IDOMMOD(® 115. Tacoma

Optical Scanning Architectures For Electronic Printing Applications

NASA Astrophysics Data System (ADS)

Johnson, Richard V.

1987-06-01

The explosive growth of computer technology in recent years has precipitated an equally dramatic growth in the market for nonimpact electronic printers. One of the most popular methods for implementing a high quality nonimpact electronic printer is to integrate a laser scanner with a xerographic copier/duplicator. The subject of this article is a discussion of alternative optical scanner architectures, including both traditional designs which are well represented in the marketplace, and also more exotic designs configured with spatial light modulators, designs which to date have had scant penetration into the marketplace but which can offer superior image quality.

Development turbine blade for ultramicro hydro power generation by 3D printer system

NASA Astrophysics Data System (ADS)

Kamimura, T.; Itoh, H.; Sugiura, K.

2017-11-01

We have developed micro generation system for effective use of unutilized energy and the spread of a self-controlled dispersion energy supply system. The turbine blade was designed for achieving high performance by special shape. The turbine type was called quasi-Peace turbine type. Turbine with a diameter of 30cm is made of metal, it was created by the 5-axis milling machine. The experimental apparatus was fabricated by the 3D printer. An experiment was carried out in the scale down model. The specific speed of this turbine was much lower than that of existing turbines.

The Emerging Role of 3-Dimensional Printing in Rhinology.

PubMed

Stokken, Janalee K; Pallanch, John F

2017-06-01

Nasal septal perforations, particularly those that are large and irregular in shape, often present as challenging surgical dilemmas. New technology has allowed us to develop techniques using computed tomography imaging and 3-dimensional (3D) printers to design custom polymeric silicone septal buttons. These buttons offer patients an option that avoids a surgical intervention when standard buttons do not fit well or are not tolerated. Preliminary data suggest that buttons designed by 3D printer technology provide more comfort than standard commercially available or hand-carved buttons with equivalent reduction of symptoms. Copyright © 2017 Elsevier Inc. All rights reserved.

32 CFR 37.1045 - To whom must I send copies of the award document?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false To whom must I send copies of the award document... of the Award Document § 37.1045 To whom must I send copies of the award document? You must send a copy of the award document to the: (a) Recipient. You must include on the first page of the recipient's...

32 CFR 37.1045 - To whom must I send copies of the award document?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false To whom must I send copies of the award document... of the Award Document § 37.1045 To whom must I send copies of the award document? You must send a copy of the award document to the: (a) Recipient. You must include on the first page of the recipient's...

32 CFR 37.1045 - To whom must I send copies of the award document?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false To whom must I send copies of the award document... of the Award Document § 37.1045 To whom must I send copies of the award document? You must send a copy of the award document to the: (a) Recipient. You must include on the first page of the recipient's...

32 CFR 37.1045 - To whom must I send copies of the award document?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false To whom must I send copies of the award document... of the Award Document § 37.1045 To whom must I send copies of the award document? You must send a copy of the award document to the: (a) Recipient. You must include on the first page of the recipient's...

32 CFR 37.1045 - To whom must I send copies of the award document?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false To whom must I send copies of the award document... of the Award Document § 37.1045 To whom must I send copies of the award document? You must send a copy of the award document to the: (a) Recipient. You must include on the first page of the recipient's...

Preliminary study of the dosimetric characteristics of 3D-printed materials with megavoltage photons

NASA Astrophysics Data System (ADS)

Jeong, Seonghoon; Yoon, Myonggeun; Chung, Weon Kuu; Kim, Dong Wook

2015-07-01

These days, 3D-printers are on the rise in various fields including radiation therapy. This preliminary study aimed to estimate the dose characteristics of 3D-printer materials that could be used as compensators or immobilizers in radiation treatment. The cubes with length of 5 cm and different densities of 50%, 75% and 100% were printed by using a 3D-printer. Planning CT scans of the cubes were performed by using a CT simulator (Brilliance CT, Philips Medical System, Netherlands). Dose distributions behind the cube were calculated after a 6 MV photon beam had passed through the cube. The dose responses for the 3D-printed cube, air and water were measured by using EBT3 film and a 2D array detector. When the results of air case were normalized to 100, the dose calculated by the TPS and the measured doses to 50% and 75% cube were of the 96 ~ 99. The measured and the calculated doses to water and to 100% of the cube were 82 ~ 84. The HU values for the 50%, 75% and 100% density cases were -910, -860 and -10, respectively. The dose characteristics of the 50% and the 75% products were similar to that of air while the 100% product seemed to be similar to that of water. This information will provide guidelines for making an immobilization tool that can play the role of a compensator and for making a real human phantom that can exactly describe the inside of the human body. This study was necessary for Poly Lactic Acid (PLA) based 3D-printer users who are planning to make something related to radiation therapy.

NASA's In-Space Manufacturing Project: Materials and Manufacturing Process Development Update

NASA Technical Reports Server (NTRS)

Prater, Tracie; Bean, Quincy; Werkheiser, Niki; Ledbetter, Frank

2017-01-01

The mission of NASA's In-Space Manufacturing (ISM) project is to identify, design, and implement on-demand, sustainable manufacturing solutions for fabrication, maintenance and repair during exploration missions. ISM has undertaken a phased strategy of incrementally increasing manufacturing capabilities to achieve this goal. The ISM project began with the development of the first 3D printer for the International Space Station. To date, the printer has completed two phases of flight operations. Results from phase I specimens indicated some differences in material properties between ground-processed and ISS-processed specimens, but results of follow-on analyses of these parts and a ground-based study with an equivalent printer strongly indicate that this variability is likely attributable to differences in manufacturing process settings between the ground and flight prints rather than microgravity effects on the fused deposition modeling (FDM) process. Analysis of phase II specimens from the 3D Printing in Zero G tech demo, which shed further light on the sources of material variability, will be presented. The ISM project has also developed a materials characterization plan for the Additive Manufacturing Facility, the follow-on commercial multimaterial 3D printing facility developed for ISS by Made in Space. This work will yield a suite of characteristic property values that can inform use of AMF by space system designers. Other project activities include development of an integrated 3D printer and recycler, known as the Refabricator, by Tethers Unlimited, which will be operational on ISS in 2018. The project also recently issued a broad area announcement for a multimaterial fabrication laboratory, which may include in-space manufacturing capabilities for metals, electronics, and polymeric materials, to be deployed on ISS in the 2022 timeframe.

Diagnostic yield of ink-jet prints from digital radiographs for the assessment of approximal carious lesions: ROC-analysis.

PubMed

Schulze, Ralf K W; Grimm, Stefanie; Schulze, Dirk; Voss, Kai; Keller, Hans-Peter; Wedel, Matthias

2011-08-01

To investigate the diagnostic quality of different quality, individually calibrated ink-jet printers for the very challenging dental radiographic task of approximal carious lesion detection. A test-pattern evaluating resolution, contrast and homogeneity of the ink-jet prints was developed. 50 standardized dental radiographs each showing two neighbouring teeth in natural contact were printed on glossy paper with calibrated, randomly selected ink-jet printers (Canon S520 and iP4500, Epson Stylus Photo R2400). Printing size equalled the viewing size on a 17″ cathode-ray-tube monitor daily quality-tested according to German regulations. The true caries status was determined from serial sectioning and microscopic evaluation. 16 experienced observers evaluated the radiographs on a five-point confidence scale on all prints plus the viewing monitor with respect to the visibility of a carious lesion. A non-parametric Receiver-Operating Characteristics (ROC-) analysis was performed explicitly designed for the evaluation of readings stemming from identical samples but different modality. Significant differences are expressed by a critical ratio z exceeding ±2. Diagnostic accuracy was determined by the area (Az) underneath the ROC-curves. Average Az-values ranged between 0.62 (S520 and R2400) and 0.64 (monitor, iP4500), with no significant difference between modalities (P=0.172). Neither significant (range mean z: -0.40 (S520) and -0.11 (iP4500)) nor clinically relevant differences were found between printers and viewing monitor. Our results for a challenging task in dental radiography indicate that calibrated, off-the-shelf ink-jet printers are able to reproduce (dental) radiographs at quality levels sufficient for radiographic diagnosis in a typical dental working environment. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

MFP scanner diagnostics using a self-printed target to measure the modulation transfer function

NASA Astrophysics Data System (ADS)

Wang, Weibao; Bauer, Peter; Wagner, Jerry; Allebach, Jan P.

2014-01-01

In the current market, reduction of warranty costs is an important avenue for improving profitability by manufacturers of printer products. Our goal is to develop an autonomous capability for diagnosis of printer and scanner caused defects with mid-range laser multifunction printers (MFPs), so as to reduce warranty costs. If the scanner unit of the MFP is not performing according to specification, this issue needs to be diagnosed. If there is a print quality issue, this can be diagnosed by printing a special test page that is resident in the firmware of the MFP unit, and then scanning it. However, the reliability of this process will be compromised if the scanner unit is defective. Thus, for both scanner and printer image quality issues, it is important to be able to properly evaluate the scanner performance. In this paper, we consider evaluation of the scanner performance by measuring its modulation transfer function (MTF). The MTF is a fundamental tool for assessing the performance of imaging systems. Several ways have been proposed to measure the MTF, all of which require a special target, for example a slanted-edge target. It is unacceptably expensive to ship every MFP with such a standard target, and to expect that the customer can keep track of it. To reduce this cost, in this paper, we develop new approach to this task. It is based on a self-printed slanted-edge target. Then, we propose algorithms to improve the results using a self-printed slanted-edge target. Finally, we present experimental results for MTF measurement using self-printed targets and compare them to the results obtained with standard targets.

[APPLICATION OF THREE DIMENSIONAL PRINTING ON MANUFACTURING BIONIC SCAFFOLDS OF SPINAL CORD IN RATS].

PubMed

Chen, Yisheng; Wang, Jingjing; Chen, Xuyi; Chen, Chong; Tu, Yue; Zhang, Sai; Li, Xiaohong

2015-03-01

To fabricate the bionic scaffolds of rat spinal cord by combining three dimensional (3D) printer and 3D software, so as to lay the foundation of theory and technology for the manufacture of scaffolds by using biomaterials. Three female Sprague Dawley rats were scanned by 7.0T MRI to obtain the shape and position data of the cross section and gray matter of T8 to T10 spinal cord. Combined with data of position and shape of nerve conduction beam, the relevant data were obtained via Getdata software. Then the 3D graphics were made and converted to stereolithography (STL) format by using SolidWorks software. Photosensitive resin was used as the materials of spinal cord scaffolds. The bionic scaffolds were fabricated by 3D printer. MRI showed that the section shape of T8 to T10 segments of the spinal cord were approximately oval with a relatively long sagittal diameter of (2.20 ± 0.52) mm and short transverse diameter of (2.05 ± 0.24) mm, and the data of nerve conduction bundle were featured in the STL format. The spinal cord bionic scaffolds of the target segments made by 3D printer were similar to the spinal cord of rat in the morphology and size, and the position of pores simulated normal nerve conduction of rat spinal cord. Spinal cord scaffolds produced by 3D printer which have similar shape and size of normal rat spinal cord are more bionic, and the procedure is simple. This technology combined with biomaterials is also promising in spinal cord repairing after spinal cord injury.

Surface topography study of prepared 3D printed moulds via 3D printer for silicone elastomer based nasal prosthesis

NASA Astrophysics Data System (ADS)

Abdullah, Abdul Manaf; Din, Tengku Noor Daimah Tengku; Mohamad, Dasmawati; Rahim, Tuan Noraihan Azila Tuan; Akil, Hazizan Md; Rajion, Zainul Ahmad

2016-12-01

Conventional prosthesis fabrication is highly depends on the hand creativity of laboratory technologist. The development in 3D printing technology offers a great help in fabricating affordable and fast yet esthetically acceptable prostheses. This study was conducted to discover the potential of 3D printed moulds for indirect silicone elastomer based nasal prosthesis fabrication. Moulds were designed using computer aided design (CAD) software (Solidworks, USA) and converted into the standard tessellation language (STL) file. Three moulds with layer thickness of 0.1, 0.2 and 0.3mm were printed utilizing polymer filament based 3D printer (Makerbot Replicator 2X, Makerbot, USA). Another one mould was printed utilizing liquid resin based 3D printer (Objet 30 Scholar, Stratasys, USA) as control. The printed moulds were then used to fabricate maxillofacial silicone specimens (n=10)/mould. Surface profilometer (Surfcom Flex, Accretech, Japan), digital microscope (KH77000, Hirox, USA) and scanning electron microscope (Quanta FEG 450, Fei, USA) were used to measure the surface roughness as well as the topological properties of fabricated silicone. Statistical analysis of One-Way ANOVA was employed to compare the surface roughness of the fabricated silicone elastomer. Result obtained demonstrated significant differences in surface roughness of the fabricated silicone (p<0.01). Further post hoc analysis also revealed significant differences in silicone fabricated using different 3D printed moulds (p<0.01). A 3D printed mould was successfully prepared and characterized. With surface topography that could be enhanced, inexpensive and rapid mould fabrication techniques, polymer filament based 3D printer is potential for indirect silicone elastomer based nasal prosthesis fabrication.

Improving the value of costly genetic reference laboratory testing with active utilization management.

PubMed

Dickerson, Jane A; Cole, Bonnie; Conta, Jessie H; Wellner, Monica; Wallace, Stephanie E; Jack, Rhona M; Rutledge, Joe; Astion, Michael L

2014-01-01

Tests that are performed outside of the ordering institution, send-out tests, represent an area of risk to patients because of complexity associated with sending tests out. Risks related to send-out tests include increased number of handoffs, ordering the wrong or unnecessary test, specimen delays, data entry errors, preventable delays in reporting and acknowledging results, and excess financial liability. Many of the most expensive and most misunderstood tests are send-out genetic tests. To design and develop an active utilization management program to reduce the risk to patients and improve value of genetic send-out tests. Send-out test requests that met defined criteria were reviewed by a rotating team of doctoral-level consultants and a genetic counselor in a pediatric tertiary care center. Two hundred fifty-one cases were reviewed during an 8-month period. After review, nearly one-quarter of genetic test requests were modified in the downward direction, saving a total of 2% of the entire send-out bill and 19% of the test requests under management. Ultimately, these savings were passed on to patients. Implementing an active utilization strategy for expensive send-out tests can be achieved with minimal technical resources and results in improved value of testing to patients.

Powering an in-space 3D printer using solar light energy

NASA Astrophysics Data System (ADS)

Leake, Skye; McGuire, Thomas; Parsons, Michael; Hirsch, Michael P.; Straub, Jeremy

2016-05-01

This paper describes how a solar power source can enable in-space 3D printing without requiring conversion to electric power and back. A design for an in-space 3D printer is presented, with a particular focus on the power generation system. Then, key benefits are presented and evaluated. Specifically, the approach facilitates the design of a spacecraft that can be built, launched, and operated at very low cost levels. The proposed approach also facilitates easy configuration of the amount of energy that is supplied. Finally, it facilitates easier disposal by removing the heavy metals and radioactive materials required for a nuclear-power solution.

Characterization of hydrogel printer for direct cell-laden scaffolds

NASA Astrophysics Data System (ADS)

Whulanza, Yudan; Arsyan, Rendria; Saragih, Agung Shamsuddin

2018-02-01

The additive manufacturing technology has been massively developed since the last decade. The technology was previously known as rapid prototyping techniques that aimed to produce a prototyping product in fast and economical way. Currently, this technique is also applied to fabricate microstructure utilized in tissue engineering technology. Here, we introduce a 3D printer which using hydrogel gelatin to realize cell laden scaffold with dimension around 50-100 µm. However, in order to fabricate such a precise dimension, an optimum working parameters are required to control the physical properties of gelatin. At the end of our study, we formulated the best parameters to perform the product as we desired.

Research highlights: printing the future of microfabrication.

PubMed

Tseng, Peter; Murray, Coleman; Kim, Donghyuk; Di Carlo, Dino

2014-05-07

In this issue we highlight emerging microfabrication approaches suitable for microfluidic systems with a focus on "additive manufacturing" processes (i.e. printing). In parallel with the now-wider availability of low cost consumer-grade 3D printers (as evidenced by at least three brands of 3D printers for sale in a recent visit to an electronics store in Akihabara, Tokyo), commercial-grade 3D printers are ramping to higher and higher resolution with new capabilities, such as printing of multiple materials of different transparency, and with different mechanical and electrical properties. We highlight new work showing that 3D printing (stereolithography approaches in particular) has now risen as a viable technology to print whole microfluidic devices. Printing on 2D surfaces such as paper is an everyday experience, and has been used widely in analytical chemistry for printing conductive materials on paper strips for glucose and other electrochemical sensors. We highlight recent work using electrodes printed on paper for digital microfluidic droplet actuation. Finally, we highlight recent work in which printing of membrane-bound droplets that interconnect through bilayer membranes may open up an entirely new approach to microfluidic manufacturing of soft devices that mimic physiological systems.

Innovations in 3D printing: a 3D overview from optics to organs.

PubMed

Schubert, Carl; van Langeveld, Mark C; Donoso, Larry A

2014-02-01

3D printing is a method of manufacturing in which materials, such as plastic or metal, are deposited onto one another in layers to produce a three dimensional object, such as a pair of eye glasses or other 3D objects. This process contrasts with traditional ink-based printers which produce a two dimensional object (ink on paper). To date, 3D printing has primarily been used in engineering to create engineering prototypes. However, recent advances in printing materials have now enabled 3D printers to make objects that are comparable with traditionally manufactured items. In contrast with conventional printers, 3D printing has the potential to enable mass customisation of goods on a large scale and has relevance in medicine including ophthalmology. 3D printing has already been proved viable in several medical applications including the manufacture of eyeglasses, custom prosthetic devices and dental implants. In this review, we discuss the potential for 3D printing to revolutionise manufacturing in the same way as the printing press revolutionised conventional printing. The applications and limitations of 3D printing are discussed; the production process is demonstrated by producing a set of eyeglass frames from 3D blueprints.

Falcon: Visual analysis of large, irregularly sampled, and multivariate time series data in additive manufacturing

DOE PAGES

Steed, Chad A.; Halsey, William; Dehoff, Ryan; ...

2017-02-16

Flexible visual analysis of long, high-resolution, and irregularly sampled time series data from multiple sensor streams is a challenge in several domains. In the field of additive manufacturing, this capability is critical for realizing the full potential of large-scale 3D printers. Here, we propose a visual analytics approach that helps additive manufacturing researchers acquire a deep understanding of patterns in log and imagery data collected by 3D printers. Our specific goals include discovering patterns related to defects and system performance issues, optimizing build configurations to avoid defects, and increasing production efficiency. We introduce Falcon, a new visual analytics system thatmore » allows users to interactively explore large, time-oriented data sets from multiple linked perspectives. Falcon provides overviews, detailed views, and unique segmented time series visualizations, all with adjustable scale options. To illustrate the effectiveness of Falcon at providing thorough and efficient knowledge discovery, we present a practical case study involving experts in additive manufacturing and data from a large-scale 3D printer. The techniques described are applicable to the analysis of any quantitative time series, though the focus of this paper is on additive manufacturing.« less

Falcon: Visual analysis of large, irregularly sampled, and multivariate time series data in additive manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steed, Chad A.; Halsey, William; Dehoff, Ryan

Flexible visual analysis of long, high-resolution, and irregularly sampled time series data from multiple sensor streams is a challenge in several domains. In the field of additive manufacturing, this capability is critical for realizing the full potential of large-scale 3D printers. Here, we propose a visual analytics approach that helps additive manufacturing researchers acquire a deep understanding of patterns in log and imagery data collected by 3D printers. Our specific goals include discovering patterns related to defects and system performance issues, optimizing build configurations to avoid defects, and increasing production efficiency. We introduce Falcon, a new visual analytics system thatmore » allows users to interactively explore large, time-oriented data sets from multiple linked perspectives. Falcon provides overviews, detailed views, and unique segmented time series visualizations, all with adjustable scale options. To illustrate the effectiveness of Falcon at providing thorough and efficient knowledge discovery, we present a practical case study involving experts in additive manufacturing and data from a large-scale 3D printer. The techniques described are applicable to the analysis of any quantitative time series, though the focus of this paper is on additive manufacturing.« less

Printer model for dot-on-dot halftone screens

NASA Astrophysics Data System (ADS)

Balasubramanian, Raja

1995-04-01

A printer model is described for dot-on-dot halftone screens. For a given input CMYK signal, the model predicts the resulting spectral reflectance of the printed patch. The model is derived in two steps. First, the C, M, Y, K dot growth functions are determined which relate the input digital value to the actual dot area coverages of the colorants. Next, the reflectance of a patch is predicted as a weighted combination of the reflectances of the four solid C, M, Y, K patches and their various overlays. This approach is analogous to the Neugebauer model, with the random mixing equations being replaced by dot-on-dot mixing equations. A Yule-Neilsen correction factor is incorporated to account for light scattering within the paper. The dot area functions and Yule-Neilsen parameter are chosen to optimize the fit to a set of training data. The model is also extended to a cellular framework, requiring additional measurements. The model is tested with a four color xerographic printer employing a line-on-line halftone screen. CIE L*a*b* errors are obtained between measurements and model predictions. The Yule-Neilsen factor significantly decreases the model error. Accuracy is also increased with the use of a cellular framework.

Development of gel materials with high transparency and mechanical strength for use with a 3D gel printer SWIM-ER

NASA Astrophysics Data System (ADS)

Tase, Taishi; Okada, Koji; Takamatsu, Kyuichiro; Saito, Azusa; Kawakami, Masaru; Furukawa, Hidemitsu

2016-04-01

Medical doctors use artificial blood vessels and organ models, which are usually made of plastic, to explain operations to students, or patients awaiting treatment. However, there are some problems such as the high cost of making the model and there is not a realistic feel because the model is hard. These problems can be solved using soft and wet material for instance gel. Gels are materials with unique properties such as transparency, biocompatibility, and low friction. In recent years, high strength gel has been developed and is expected to be applied in medical fields in the future. Artificial models of gel can be produced by 3D gel printers. Our group has been developing a 3D gel printer with 1mm precision in printing, but the shape, size and mechanical strength are not sufficient for medical models. In this study, we overcome these problems and make a gel model which is transparent, mechanically strong with a fine shape. The strength and molding accuracy is improved by changing and preparing the cross linker and ultraviolet absorber. We conducted mechanical and molding tests to confirm that the gel material properties improved.

3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques

NASA Astrophysics Data System (ADS)

Zhang, Bin; Seong, Baekhoon; Nguyen, VuDat; Byun, Doyoung

2016-02-01

Recently, the three-dimensional (3D) printing technique has received much attention for shape forming and manufacturing. The fused deposition modeling (FDM) printer is one of the various 3D printers available and has become widely used due to its simplicity, low-cost, and easy operation. However, the FDM technique has a limitation whereby its patterning resolution is too low at around 200 μm. In this paper, we first present a hybrid mechanism of electrohydrodynamic jet printing with the FDM technique, which we name E-FDM. We then develop a novel high-resolution 3D printer based on the E-FDM process. To determine the optimal condition for structuring, we also investigated the effect of several printing parameters, such as temperature, applied voltage, working height, printing speed, flow-rate, and acceleration on the patterning results. This method was capable of fabricating both high resolution 2D and 3D structures with the use of polylactic acid (PLA). PLA has been used to fabricate scaffold structures for tissue engineering, which has different hierarchical structure sizes. The fabrication speed was up to 40 mm/s and the pattern resolution could be improved to 10 μm.

Executing scatter operation to parallel computer nodes by repeatedly broadcasting content of send buffer partition corresponding to each node upon bitwise OR operation

DOEpatents

Archer, Charles J [Rochester, MN; Ratterman, Joseph D [Rochester, MN

2009-11-06

Executing a scatter operation on a parallel computer includes: configuring a send buffer on a logical root, the send buffer having positions, each position corresponding to a ranked node in an operational group of compute nodes and for storing contents scattered to that ranked node; and repeatedly for each position in the send buffer: broadcasting, by the logical root to each of the other compute nodes on a global combining network, the contents of the current position of the send buffer using a bitwise OR operation, determining, by each compute node, whether the current position in the send buffer corresponds with the rank of that compute node, if the current position corresponds with the rank, receiving the contents and storing the contents in a reception buffer of that compute node, and if the current position does not correspond with the rank, discarding the contents.

Send-side matching of data communications messages

DOEpatents

Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2014-07-01

Send-side matching of data communications messages includes a plurality of compute nodes organized for collective operations, including: issuing by a receiving node to source nodes a receive message that specifies receipt of a single message to be sent from any source node, the receive message including message matching information, a specification of a hardware-level mutual exclusion device, and an identification of a receive buffer; matching by two or more of the source nodes the receive message with pending send messages in the two or more source nodes; operating by one of the source nodes having a matching send message the mutual exclusion device, excluding messages from other source nodes with matching send messages and identifying to the receiving node the source node operating the mutual exclusion device; and sending to the receiving node from the source node operating the mutual exclusion device a matched pending message.

Fencing data transfers in a parallel active messaging interface of a parallel computer

DOEpatents

Blocksome, Michael A.; Mamidala, Amith R.

2015-06-02

Fencing data transfers in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI including data communications endpoints, each endpoint including a specification of data communications parameters for a thread of execution on a compute node, including specifications of a client, a context, and a task; the compute nodes coupled for data communications through the PAMI and through data communications resources including at least one segment of shared random access memory; including initiating execution through the PAMI of an ordered sequence of active SEND instructions for SEND data transfers between two endpoints, effecting deterministic SEND data transfers through a segment of shared memory; and executing through the PAMI, with no FENCE accounting for SEND data transfers, an active FENCE instruction, the FENCE instruction completing execution only after completion of all SEND instructions initiated prior to execution of the FENCE instruction for SEND data transfers between the two endpoints.

Fencing data transfers in a parallel active messaging interface of a parallel computer

DOEpatents

Blocksome, Michael A.; Mamidala, Amith R.

2015-06-09

Fencing data transfers in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI including data communications endpoints, each endpoint including a specification of data communications parameters for a thread of execution on a compute node, including specifications of a client, a context, and a task; the compute nodes coupled for data communications through the PAMI and through data communications resources including at least one segment of shared random access memory; including initiating execution through the PAMI of an ordered sequence of active SEND instructions for SEND data transfers between two endpoints, effecting deterministic SEND data transfers through a segment of shared memory; and executing through the PAMI, with no FENCE accounting for SEND data transfers, an active FENCE instruction, the FENCE instruction completing execution only after completion of all SEND instructions initiated prior to execution of the FENCE instruction for SEND data transfers between the two endpoints.

Fencing data transfers in a parallel active messaging interface of a parallel computer

DOEpatents

Blocksome, Michael A.; Mamidala, Amith R.

2015-08-11

Fencing data transfers in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI including data communications endpoints, each endpoint comprising a specification of data communications parameters for a thread of execution on a compute node, including specifications of a client, a context, and a task, the compute nodes coupled for data communications through the PAMI and through data communications resources including a deterministic data communications network, including initiating execution through the PAMI of an ordered sequence of active SEND instructions for SEND data transfers between two endpoints, effecting deterministic SEND data transfers; and executing through the PAMI, with no FENCE accounting for SEND data transfers, an active FENCE instruction, the FENCE instruction completing execution only after completion of all SEND instructions initiated prior to execution of the FENCE instruction for SEND data transfers between the two endpoints.

Fencing data transfers in a parallel active messaging interface of a parallel computer

DOEpatents

Blocksome, Michael A.; Mamidala, Amith R.

2015-06-30

Fencing data transfers in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI including data communications endpoints, each endpoint comprising a specification of data communications parameters for a thread of execution on a compute node, including specifications of a client, a context, and a task, the compute nodes coupled for data communications through the PAMI and through data communications resources including a deterministic data communications network, including initiating execution through the PAMI of an ordered sequence of active SEND instructions for SEND data transfers between two endpoints, effecting deterministic SEND data transfers; and executing through the PAMI, with no FENCE accounting for SEND data transfers, an active FENCE instruction, the FENCE instruction completing execution only after completion of all SEND instructions initiated prior to execution of the FENCE instruction for SEND data transfers between the two endpoints.

Specific pathologist responses for Standard for Exchange of Nonclinical Data (SEND).

PubMed

Watanabe, Atsushi; Kusuoka, Osamu; Sato, Norihiro; Nakazono, Osamu; Wasko, Michael; Potenta, Daniel; Nakae, Dai; Hatakeyama, Hirofumi; Iwata, Hijiri; Naota, Misaki; Anzai, Takayuki

2017-07-01

The Standard for Exchange of Nonclinical Data (SEND), introduced by the US Food and Drug Administration (FDA), is a scheme for the computerization, electronic application, and screening of preclinical data. Since its establishment, related organizations have been working together to implement SEND. However, it is difficult for individual pharmaceutical companies that often outsource to achieve complete compliance with SEND; hence, the cooperation of contract research organizations (CROs) and SEND Registered Solution Providers (RSPs) is indispensable. In SEND, most data, including those on pathology findings, are converted into controlled terminology (CT), but it is not a simple process to convert findings or levels of severity in the field of pathology, which is a descriptive science. The authors have successfully completed an FDA trial submission for a toxicology test conducted at a CRO and in doing so acquired important knowledge. This article presents a clear picture of such important knowledge from a pathologist's viewpoint.

Specific pathologist responses for Standard for Exchange of Nonclinical Data (SEND)

PubMed Central

Watanabe, Atsushi; Kusuoka, Osamu; Sato, Norihiro; Nakazono, Osamu; Wasko, Michael; Potenta, Daniel; Nakae, Dai; Hatakeyama, Hirofumi; Iwata, Hijiri; Naota, Misaki; Anzai, Takayuki

2017-01-01

The Standard for Exchange of Nonclinical Data (SEND), introduced by the US Food and Drug Administration (FDA), is a scheme for the computerization, electronic application, and screening of preclinical data. Since its establishment, related organizations have been working together to implement SEND. However, it is difficult for individual pharmaceutical companies that often outsource to achieve complete compliance with SEND; hence, the cooperation of contract research organizations (CROs) and SEND Registered Solution Providers (RSPs) is indispensable. In SEND, most data, including those on pathology findings, are converted into controlled terminology (CT), but it is not a simple process to convert findings or levels of severity in the field of pathology, which is a descriptive science. The authors have successfully completed an FDA trial submission for a toxicology test conducted at a CRO and in doing so acquired important knowledge. This article presents a clear picture of such important knowledge from a pathologist’s viewpoint. PMID:28798527

Send-side matching of data communications messages

DOEpatents

Archer, Charles J.; Blocksome, Michael A.; Ratterman, Joseph D.; Smith, Brian E.

2014-06-17

Send-side matching of data communications messages in a distributed computing system comprising a plurality of compute nodes, including: issuing by a receiving node to source nodes a receive message that specifies receipt of a single message to be sent from any source node, the receive message including message matching information, a specification of a hardware-level mutual exclusion device, and an identification of a receive buffer; matching by two or more of the source nodes the receive message with pending send messages in the two or more source nodes; operating by one of the source nodes having a matching send message the mutual exclusion device, excluding messages from other source nodes with matching send messages and identifying to the receiving node the source node operating the mutual exclusion device; and sending to the receiving node from the source node operating the mutual exclusion device a matched pending message.

Responses to the Standard for Exchange of Nonclinical Data (SEND) in non-US countries

PubMed Central

Anzai, Takayuki; Kaminishi, Masamichi; Sato, Keizo; Kaufman, Laura; Iwata, Hijiri; Nakae, Dai

2015-01-01

The Standard for the Exchange of Nonclinical Data (SEND), adopted by the US FDA, is part of a set of regulations and guidances requiring the submission of standardized electronic study data for nonclinical and clinical data submissions. SEND is the nonclinical implementation of SDTM (Study Data Tabulation Model), the standard electronic format for clinical regulatory submissions to FDA. SEND, SDTM, and the associated Controlled Terminology have been developed by CDISC (Clinical Data Interchange Standards Consortium). In order to successfully implement SEND, interdisciplinary contributions between sponsors and CROs, need a model for task allocation. This is being undertaken by the Pharmaceutical Users Software Exchange (PhUSE). Because SEND is currently the preferred submission format of the US FDA only and will become required by it starting in December 2016, only American academic societies and companies are actively involved. An exception to this is the INHAND initiative, which leads the way in standardizing terminology for toxicological pathology. On the other hand, international globalization of other clinical and nonclinical practices is not feasible because there are substantial differences between the US and non-US countries in CRO involvement in drug development. Thus, non-US countries must consider and develop approaches to SEND that meet their needs. This paper summarizes the activities of the major organizations involved in SEND development and implementation, discusses the effective use of SEND, and details a compliance scheme (research material of the Showa University School of Medicine) illustrating how pharmaceutical companies can complete a large amount of work up to an FDA application with the effective utilization of CROs and solution providers. PMID:26028814

A Formal Language for Cryptographic Protocol Requirements

DTIC Science & Technology

1996-01-01

L;KAB; AgKBS ; fA; TAgKAB (4) B sends to A: fTA + 1gKAB Here A and B are two principals. By sending the rst message, A requests of the...A: CertB; fAKBgKA ; algchoiceB; fmd (fAKBgKA ; algchoiceB ; NA; alglistA)gK1 B (3) A sends to B: fAKAgKB ; fmd (fAKAgKB ; fAKBgKA)gK1 A CertX is a...alglistA 3. B sends to C: CertB ; fAKBgKC ; algchoiceB; fmd (fAKBgKC ; algchoiceB ; NA; alglistA)gK1 B (intercepted by I) 4. IB sends to A : CertB

Preliminary geologic map of the Elsinore 7.5' Quadrangle, Riverside County, California

USGS Publications Warehouse

Morton, Douglas M.; Weber, F. Harold; Digital preparation: Alvarez, Rachel M.; Burns, Diane

2003-01-01

Open-File Report 03-281 contains a digital geologic map database of the Elsinore 7.5’ quadrangle, Riverside County, California that includes: 1. ARC/INFO (Environmental Systems Research Institute, http://www.esri.com) version 7.2.1 coverages of the various elements of the geologic map. 2. A Postscript file to plot the geologic map on a topographic base, and containing a Correlation of Map Units diagram (CMU), a Description of Map Units (DMU), and an index map. 3. Portable Document Format (.pdf) files of: a. This Readme; includes in Appendix I, data contained in els_met.txt b. The same graphic as plotted in 2 above. Test plots have not produced precise 1:24,000-scale map sheets. Adobe Acrobat page size setting influences map scale. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Where known, grain size is indicated on the map by a subscripted letter or letters following the unit symbols as follows: lg, large boulders; b, boulder; g, gravel; a, arenaceous; s, silt; c, clay; e.g. Qyfa is a predominantly young alluvial fan deposit that is arenaceous. Multiple letters are used for more specific identification or for mixed units, e.g., Qfysa is a silty sand. In some cases, mixed units are indicated by a compound symbol; e.g., Qyf2sc. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above).

JaxoDraw: A graphical user interface for drawing Feynman diagrams

NASA Astrophysics Data System (ADS)

Binosi, D.; Theußl, L.

2004-08-01

JaxoDraw is a Feynman graph plotting tool written in Java. It has a complete graphical user interface that allows all actions to be carried out via mouse click-and-drag operations in a WYSIWYG fashion. Graphs may be exported to postscript/EPS format and can be saved in XML files to be used for later sessions. One of JaxoDraw's main features is the possibility to create ? code that may be used to generate graphics output, thus combining the powers of ? with those of a modern day drawing program. With JaxoDraw it becomes possible to draw even complicated Feynman diagrams with just a few mouse clicks, without the knowledge of any programming language. Program summaryTitle of program: JaxoDraw Catalogue identifier: ADUA Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar gzip file Operating system: Any Java-enabled platform, tested on Linux, Windows ME, XP, Mac OS X Programming language used: Java License: GPL Nature of problem: Existing methods for drawing Feynman diagrams usually require some 'hard-coding' in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Method of solution: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Number of bytes in distributed program, including test data: 2 117 863 Number of lines in distributed program, including test data: 60 000 Restrictions: Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Typical running time: As an interactive program, the running time depends on the complexity of the diagram to be drawn.

SG2PS (structural geology to postscript converter) - A graphical solution for brittle structural data evaluation and paleostress calculation

NASA Astrophysics Data System (ADS)

Sasvári, Ágoston; Baharev, Ali

2014-05-01

The aim of this work was to create an open source cross platform application to process brittle structural geological data with seven paleostress inversion algorithms published by different authors and formerly not available within a single desktop application. The tool facilitates separate processing and plotting of different localities, data types and user made groups, using the same single input file. Simplified data input is supported, requiring as small amount of data as possible. Data rotation to correct for bedding tilting, rotation with paleomagnetic declination and k-means clustering are available. RUP and ANG stress estimators calculation and visualization, resolved shear direction display and Mohr circle stress visualization are available. RGB-colored vector graphical outputs are automatically generated in Encapsulated PostScript and Portable Document Format. Stereographical displays on great circle or pole point plot, equal area or equal angle net and upper or lower hemisphere projections are implemented. Rose plots displaying dip direction or strike, with dip angle distribution of the input data set are available. This tool is ideal for preliminary data interpretation on the field (quick processing and visualization in seconds); the implemented methods can be regularly used in the daily academic and industrial work as well. The authors' goal was to create an open source and self-contained desktop application that does not require any additional third party framework (such as .NET) or the Java Virtual Machine. The software has a clear and highly modular structure enabling good code portability, easy maintainability, reusability and extensibility. A Windows installer is publicly available and the program is also fully functional on Linux. The Mac OS X port should be feasible with minimal effort. The install file with test and demo data sets, detailed manual, and links to the GitHub repositories are available on the regularly updated website www.sg2ps.eu.

From 3D view to 3D print

NASA Astrophysics Data System (ADS)

Dima, M.; Farisato, G.; Bergomi, M.; Viotto, V.; Magrin, D.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Piazza, D.

2014-08-01

In the last few years 3D printing is getting more and more popular and used in many fields going from manufacturing to industrial design, architecture, medical support and aerospace. 3D printing is an evolution of bi-dimensional printing, which allows to obtain a solid object from a 3D model, realized with a 3D modelling software. The final product is obtained using an additive process, in which successive layers of material are laid down one over the other. A 3D printer allows to realize, in a simple way, very complex shapes, which would be quite difficult to be produced with dedicated conventional facilities. Thanks to the fact that the 3D printing is obtained superposing one layer to the others, it doesn't need any particular work flow and it is sufficient to simply draw the model and send it to print. Many different kinds of 3D printers exist based on the technology and material used for layer deposition. A common material used by the toner is ABS plastics, which is a light and rigid thermoplastic polymer, whose peculiar mechanical properties make it diffusely used in several fields, like pipes production and cars interiors manufacturing. I used this technology to create a 1:1 scale model of the telescope which is the hardware core of the space small mission CHEOPS (CHaracterising ExOPlanets Satellite) by ESA, which aims to characterize EXOplanets via transits observations. The telescope has a Ritchey-Chrétien configuration with a 30cm aperture and the launch is foreseen in 2017. In this paper, I present the different phases for the realization of such a model, focusing onto pros and cons of this kind of technology. For example, because of the finite printable volume (10×10×12 inches in the x, y and z directions respectively), it has been necessary to split the largest parts of the instrument in smaller components to be then reassembled and post-processed. A further issue is the resolution of the printed material, which is expressed in terms of layers thickness, in the Z direction, and in drop-per-inch, in X and Y directions. 3D printing is also an easy and quick production technique, which can become useful in the ad-hoc realization of mechanical components for optical setups to be used in a laboratory for new concept studies and validation, reducing the manufacturing time. With this technique, indeed, it is possible to realize in few hours custom-made mechanical parts, without any specific knowledge and expertise in tool machinery, as long as the resolution and size are compliant with the requirements.

Sending Large Files without Mucking up the Works

ERIC Educational Resources Information Center

Goldborough, Reid

2005-01-01

E-mail has never been a foolproof way of sending information, and lately it has gotten even hairier, with well-meaning but overzealous anti-spam filters often blocking even legitimate messages. This document discusses different options available for sending files.

FGDC Digital Cartographic Standard for Geologic Map Symbolization (PostScript Implementation)

USGS Publications Warehouse

,

2006-01-01

PLEASE NOTE: This now-approved 'FGDC Digital Cartographic Standard for Geologic Map Symbolization (PostScript Implementation)' officially supercedes its earlier (2000) Public Review Draft version (see 'Earlier Versions of the Standard' below). In August 2006, the Digital Cartographic Standard for Geologic Map Symbolization was officially endorsed by the Federal Geographic Data Committee (FGDC) as the national standard for the digital cartographic representation of geologic map features (FGDC Document Number FGDC-STD-013-2006). Presented herein is the PostScript Implementation of the standard, which will enable users to directly apply the symbols in the standard to geologic maps and illustrations prepared in desktop illustration and (or) publishing software. The FGDC Digital Cartographic Standard for Geologic Map Symbolization contains descriptions, examples, cartographic specifications, and notes on usage for a wide variety of symbols that may be used on typical, general-purpose geologic maps and related products such as cross sections. The standard also can be used for different kinds of special-purpose or derivative map products and databases that may be focused on a specific geoscience topic (for example, slope stability) or class of features (for example, a fault map). The standard is scale-independent, meaning that the symbols are appropriate for use with geologic mapping compiled or published at any scale. It will be useful to anyone who either produces or uses geologic map information, whether in analog or digital form. Please be aware that this standard is not intended to be used inflexibly or in a manner that will limit one's ability to communicate the observations and interpretations gained from geologic mapping. In certain situations, a symbol or its usage might need to be modified in order to better represent a particular feature on a geologic map or cross section. This standard allows the use of any symbol that doesn't conflict with others in the standard, provided that it is clearly explained on the map and in the database. In addition, modifying the size, color, and (or) lineweight of an existing symbol to suit the needs of a particular map or output device also is permitted, provided that the modified symbol's appearance is not too similar to another symbol on the map. Be aware, however, that reducing lineweights below .125 mm (.005 inch) may cause symbols to plot incorrectly if output at higher resolutions (1800 dpi or higher). For guidelines on symbol usage, as well as on color design and map labeling, please refer to the standard's introductory text. Also found there are informational sections covering concepts of geologic mapping and some definitions of geologic map features, as well as sections on the newly defined concepts and terminology for the scientific confidence and locational accuracy of geologic map features. More information on both the past development and the future maintenance of the FGDC Digital Cartographic Standard for Geologic Map Symbolization can be found at the FGDC Geologic Data Subcommittee website (http://ngmdb.usgs.gov/fgdc_gds/). Earlier Versions of the Standard

Error-proneness as a handicap signal.

PubMed

De Jaegher, Kris

2003-09-21

This paper describes two discrete signalling models in which the error-proneness of signals can serve as a handicap signal. In the first model, the direct handicap of sending a high-quality signal is not large enough to assure that a low-quality signaller will not send it. However, if the receiver sometimes mistakes a high-quality signal for a low-quality one, then there is an indirect handicap to sending a high-quality signal. The total handicap of sending such a signal may then still be such that a low-quality signaller would not want to send it. In the second model, there is no direct handicap of sending signals, so that nothing would seem to stop a signaller from always sending a high-quality signal. However, the receiver sometimes fails to detect signals, and this causes an indirect handicap of sending a high-quality signal that still stops the low-quality signaller of sending such a signal. The conditions for honesty are that the probability of an error of detection is higher for a high-quality than for a low-quality signal, and that the signaller who does not detect a signal adopts a response that is bad to the signaller. In both our models, we thus obtain the result that signal accuracy should not lie above a certain level in order for honest signalling to be possible. Moreover, we show that the maximal accuracy that can be achieved is higher the lower the degree of conflict between signaller and receiver. As well, we show that it is the conditions for honest signalling that may be constraining signal accuracy, rather than the signaller trying to make honest signals as effective as possible given receiver psychology, or the signaller adapting the accuracy of honest signals depending on his interests.

Optic Nerve Decompression

MedlinePlus

... Nerve Decompression Dacryocystorhinostomy (DCR) Disclosure Statement Printer Friendly Optic Nerve Decompression John Lee, MD Introduction Optic nerve decompression is a surgical procedure aimed at ...

Relational Anxiety and Sexting.

PubMed

Weisskirch, Robert S; Drouin, Michelle; Delevi, Rakel

2017-01-01

Individuals in pursuit of, or currently in, a romantic relationship typically communicate via technology, extending to sexting with one another. Sexting is commonly understood as the sending and receiving of sexually suggestive or sexually explicit photos, video, or text via cell phone or other technologies. The characteristics that fuel whether one engages in sexting are not well understood. In this study, 459 unmarried, heterosexual undergraduate students (female = 328; male = 131), aged 18 to 25 years, from three universities completed an online questionnaire about their behaviors with technology and romantic relationships. In general, low attachment avoidance and high fear of negative evaluation from the dating partner predicted sending a sexually suggestive photo or video, sending a photo or video in one's underwear or lingerie, and sending a sexually suggestive text. High fear of negative evaluation predicted sending a nude photo or video as well as sending a text message propositioning sex. Low attachment avoidance, greater fear of negative evaluation, and greater social distress when dating were associated with sexting behaviors.

Manual centrifuge system: Bearing-based hand spinner made with 3-D printer.

PubMed

Sun-Young Yoo; Seung Jae Lee; Jong-Mo Seo

2017-07-01

Compact disk (CD) Microfluidic platforms are being studied for medical applications such as blood tests. However, its size is bulky and electricity is needed to realize centrifuge force. In this paper, bearing-based hand spinner is designed using three-dimensional printer. This spinner does not need electricity and keeps rotating direction unlike paperfuge while it is spinning. The properties of spinner vary depending on bearing type which is positioned at the center. The type of weighting area also affects change in RPM over time. When a separation experiment is implemented, separating mixture into red ink and oil and whole blood into red blood cell and plasma are achieved properly with ceramic ball bearing.

3D-printed Bioanalytical Devices

PubMed Central

Bishop, Gregory W; Satterwhite-Warden, Jennifer E; Kadimisetty, Karteek; Rusling, James F

2016-01-01

While 3D printing technologies first appeared in the 1980s, prohibitive costs, limited materials, and the relatively small number of commercially available printers confined applications mainly to prototyping for manufacturing purposes. As technologies, printer cost, materials, and accessibility continue to improve, 3D printing has found widespread implementation in research and development in many disciplines due to ease-of-use and relatively fast design-to-object workflow. Several 3D printing techniques have been used to prepare devices such as milli- and microfluidic flow cells for analyses of cells and biomolecules as well as interfaces that enable bioanalytical measurements using cellphones. This review focuses on preparation and applications of 3D-printed bioanalytical devices. PMID:27250897

Ames Lab 101: 3D Metals Printer

ScienceCinema

Ott, Ryan

2018-01-16

To meet one of the biggest energy challenges of the 21st century - finding alternatives to rare-earth elements and other critical materials - scientists will need new and advanced tools. The Critical Materials Institute at the U.S. Department of Energy's Ames Laboratory has a new one: a 3D printer for metals research. 3D printing technology, which has captured the imagination of both industry and consumers, enables ideas to move quickly from the initial design phase to final form using materials including polymers, ceramics, paper and even food. But the Critical Materials Institute (CMI) will apply the advantages of the 3D printing process in a unique way: for materials discovery.

Hydrochromic molecular switches for water-jet rewritable paper

NASA Astrophysics Data System (ADS)

Sheng, Lan; Li, Minjie; Zhu, Shaoyin; Li, Hao; Xi, Guan; Li, Yong-Gang; Wang, Yi; Li, Quanshun; Liang, Shaojun; Zhong, Ke; Zhang, Sean Xiao-An

2014-01-01

The days of rewritable paper are coming, printers of the future will use water-jet paper. Although several kinds of rewritable paper have been reported, practical usage of them is rare. Herein, a new rewritable paper for ink-free printing is proposed and demonstrated successfully by using water as the sole trigger to switch hydrochromic dyes on solid media. Water-jet prints with various colours are achieved with a commercial desktop printer based on these hydrochromic rewritable papers. The prints can be erased and rewritten dozens of times with no significant loss in colour quality. This rewritable paper is promising in that it can serve an eco-friendly information display to meet the increasing global needs for environmental protection.

Hydrochromic molecular switches for water-jet rewritable paper.

PubMed

Sheng, Lan; Li, Minjie; Zhu, Shaoyin; Li, Hao; Xi, Guan; Li, Yong-Gang; Wang, Yi; Li, Quanshun; Liang, Shaojun; Zhong, Ke; Zhang, Sean Xiao-An

2014-01-01

The days of rewritable paper are coming, printers of the future will use water-jet paper. Although several kinds of rewritable paper have been reported, practical usage of them is rare. Herein, a new rewritable paper for ink-free printing is proposed and demonstrated successfully by using water as the sole trigger to switch hydrochromic dyes on solid media. Water-jet prints with various colours are achieved with a commercial desktop printer based on these hydrochromic rewritable papers. The prints can be erased and rewritten dozens of times with no significant loss in colour quality. This rewritable paper is promising in that it can serve an eco-friendly information display to meet the increasing global needs for environmental protection.

Fabrication of cerebral aneurysm simulator with a desktop 3D printer

NASA Astrophysics Data System (ADS)

Liu, Yu; Gao, Qing; Du, Song; Chen, Zichen; Fu, Jianzhong; Chen, Bing; Liu, Zhenjie; He, Yong

2017-05-01

Now, more and more patients are suffering cerebral aneurysm. However, long training time limits the rapid growth of cerebrovascular neurosurgeons. Here we developed a novel cerebral aneurysm simulator which can be better represented the dynamic bulging process of cerebral aneurysm The proposed simulator features the integration of a hollow elastic vascular model, a skull model and a brain model, which can be affordably fabricated at the clinic (Fab@Clinic), under $25.00 each with the help of a low-cost desktop 3D printer. Moreover, the clinical blood flow and pulsation pressure similar to the human can be well simulated, which can be used to train the neurosurgical residents how to clip aneurysms more effectively.

Ames Lab 101: 3D Metals Printer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ott, Ryan

2014-02-13

To meet one of the biggest energy challenges of the 21st century - finding alternatives to rare-earth elements and other critical materials - scientists will need new and advanced tools. The Critical Materials Institute at the U.S. Department of Energy's Ames Laboratory has a new one: a 3D printer for metals research. 3D printing technology, which has captured the imagination of both industry and consumers, enables ideas to move quickly from the initial design phase to final form using materials including polymers, ceramics, paper and even food. But the Critical Materials Institute (CMI) will apply the advantages of the 3Dmore » printing process in a unique way: for materials discovery.« less

Geologic map of the Valjean Hills 7.5' quadrangle, San Bernardino County, California

USGS Publications Warehouse

Calzia, J.P.; Troxel, Bennie W.; digital database by Raumann, Christian G.

2003-01-01

FGDC-compliant metadata for the ARC/INFO coverages. The Correlation of Map Units and Description of Map Units is in the editorial format of USGS Geologic Investigations Series (I-series) maps but has not been edited to comply with I-map standards. Within the geologic map data package, map units are identified by standard geologic map criteria such as formation-name, age, and lithology. Even though this is an Open-File Report and includes the standard USGS Open-File disclaimer, the report closely adheres to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3 above) or plotting the postscript file (2 above).

Wisdom and folly in death and dying.

PubMed

Fitchett, G

1980-09-01

This author presents the argument, in the context of homiletic reflections on Psalm 90∶12, that psychosocial care for the terminally ill continues to be compromised by the anxiety and denial of the staff who provide such care. An illustrative case example is offered. An explanation is provided in terms of the support for such denial in the instrumental values of our technological culture. The work of Kübler-Ross is presented as an example of the religious function of science in modern culture. A paradoxical prescription, based on Psalm 90∶12, is proposed as a solution to the problem. A postscript by a colleague of the author illustrates the subjective attitude of the staff advocated in the paradoxical prescription.

Freud, Ferenczi, and Rosmersholm: incestuous triangles and analytic thirds.

PubMed

Rudnytsky, Peter L

2013-12-01

Utilizing a field theory of unconscious communication, and in particular the concept of the analytic third, this paper situates Freud's interpretation of Ibsen's 1886 Rosmersholm, presented in the section of his essay "Some Character-Types Met with in Psycho-Analytic Work" (1916) entitled "Those Wrecked by Success," in the context of his relationship with Ferenczi. Both in his interpretation of Rosmersholm and in his earlier papers on the psychology of love, it is argued, Freud may be seen to commenting both on Ferenczi's incestuous love triangle with Gizella and Elma Pálos and on his equally incestuous triangle with Martha and Minna Bernays. In a postscript, the challenge offered by Groddeck to Freud's oedipal reading of Rosmersholm is assessed.

Software product description

NASA Technical Reports Server (NTRS)

1991-01-01

An overview of the MultiNet system is presented. Services, supported configurations, remote printer services, netstat, netcontrol, DECnet interoperability services, and programming libraries are briefly described.

--No Title--

Science.gov Websites

disseminate its messages? Does PTWC send messages via SMS to mobile phones? Does PTWC issue evacuation orders send messages via SMS to mobile phones? No. At this time, PTWC does not directly send its messages to mobile phones. Some emergency managers in Pacific, Asian, and African countries can receive PTWC messages

MAROB Voluntary Marine Observation Program

Science.gov Websites

several ways: 1. By sending in YOTREPs (pronounced Yacht Reps) using Pangolin's YOTREP Offshore Reporter Pangolin Software. For documentation on sending YOTREPS/MAROBs using YOTREP Offshore Reporter CLICK HERE 2 . By sending in YOTREPs via WinLink 2000 Global Radio Network, or Sailmail using their AIRMAIL software

A cost-effective interdisciplinary approach to microbiologic send-out test use.

PubMed

Aesif, Scott W; Parenti, David M; Lesky, Linda; Keiser, John F

2015-02-01

Use of reference laboratories for selected laboratory testing (send-out tests) represents a significant source of laboratory costs. As the use of more complex molecular analyses becomes common in the United States, strategies to reduce costs in the clinical laboratory must evolve in order to provide high-value, cost-effective medicine. To report a strategy that employs clinical pathology house staff and key hospital clinicians in the effective use of microbiologic send-out testing. The George Washington University Hospital is a 370-bed academic hospital in Washington, DC. In 2012 all requisitions for microbiologic send-out tests were screened by the clinical pathology house staff prior to final dispensation. Tests with questionable utility were brought to the attention of ordering clinicians through the use of interdisciplinary rounds and direct face-to-face consultation. Screening resulted in a cancellation rate of 38% of send-out tests, with proportional cost savings. Nucleic acid tests represented most of the tests screened and the largest percentage of cost saved through screening. Following consultation, requested send-out tests were most often canceled because of a lack of clinical indication. Direct face-to-face consultation with ordering physicians is an effective, interdisciplinary approach to managing the use of send-out testing in the microbiology laboratory.

Applied 3D printing for microscopy in health science research

NASA Astrophysics Data System (ADS)

Brideau, Craig; Zareinia, Kourosh; Stys, Peter

2015-03-01

The rapid prototyping capability offered by 3D printing is considered advantageous for commercial applications. However, the ability to quickly produce precision custom devices is highly beneficial in the research laboratory setting as well. Biological laboratories require the manipulation and analysis of delicate living samples, thus the ability to create custom holders, support equipment, and adapters allow the extension of existing laboratory machines. Applications include camera adapters and stage sample holders for microscopes, surgical guides for tissue preparation, and small precision tools customized to unique specifications. Where high precision is needed, especially the reproduction of fine features, a printer with a high resolution is needed. However, the introduction of cheaper, lower resolution commercial printers have been shown to be more than adequate for less demanding projects. For direct manipulation of delicate samples, biocompatible raw materials are often required, complicating the printing process. This paper will examine some examples of 3D-printed objects for laboratory use, and provide an overview of the requirements for 3D printing for this application. Materials, printing resolution, production, and ease of use will all be reviewed with an eye to producing better printers and techniques for laboratory applications. Specific case studies will highlight applications for 3D-printed devices in live animal imaging for both microscopy and Magnetic Resonance Imaging.

Human factors involvement in bringing the power of AI to a heterogeneous user population

NASA Technical Reports Server (NTRS)

Czerwinski, Mary; Nguyen, Trung

1994-01-01

The Human Factors involvement in developing COMPAQ QuickSolve, an electronic problem-solving and information system for Compaq's line of networked printers, is described. Empowering customers with expert system technology so they could solve advanced networked printer problems on their own was a major goal in designing this system. This process would minimize customer down-time, reduce the number of phone calls to the Compaq Customer Support Center, improve customer satisfaction, and, most importantly, differentiate Compaq printers in the marketplace by providing the best, and most technologically advanced, customer support. This represents a re-engineering of Compaq's customer support strategy and implementation. In its first generation system, SMART, the objective was to provide expert knowledge to Compaq's help desk operation to more quickly and correctly answer customer questions and problems. QuickSolve is a second generation system in that customer support is put directly in the hands of the consumers. As a result, the design of QuickSolve presented a number of challenging issues. Because the produce would be used by a diverse and heterogeneous set of users, a significant amount of human factors research and analysis was required while designing and implementing the system. Research that shaped the organization and design of the expert system component as well.

3D gel printing for soft-matter systems innovation

NASA Astrophysics Data System (ADS)

Furukawa, Hidemitsu; Kawakami, Masaru; Gong, Jin; Makino, Masato; Kabir, M. Hasnat; Saito, Azusa

2015-04-01

In the past decade, several high-strength gels have been developed, especially from Japan. These gels are expected to use as a kind of new engineering materials in the fields of industry and medical as substitutes to polyester fibers, which are materials of artificial blood vessels. We consider if various gel materials including such high-strength gels are 3D-printable, many new soft and wet systems will be developed since the most intricate shape gels can be printed regardless of the quite softness and brittleness of gels. Recently we have tried to develop an optical 3D gel printer to realize the free-form formation of gel materials. We named this apparatus Easy Realizer of Soft and Wet Industrial Materials (SWIM-ER). The SWIM-ER will be applied to print bespoke artificial organs, including artificial blood vessels, which will be possibly used for both surgery trainings and actual surgery. The SWIM-ER can print one of the world strongest gels, called Double-Network (DN) gels, by using UV irradiation through an optical fiber. Now we also are developing another type of 3D gel printer for foods, named E-Chef. We believe these new 3D gel printers will broaden the applications of soft-matter gels.

3D printing X-Ray Quality Control Phantoms. A Low Contrast Paradigm

NASA Astrophysics Data System (ADS)

Kapetanakis, I.; Fountos, G.; Michail, C.; Valais, I.; Kalyvas, N.

2017-11-01

Current 3D printing technology products may be usable in various biomedical applications. Such an application is the creation of X-ray quality control phantoms. In this work a self-assembled 3D printer (geeetech i3) was used for the design of a simple low contrast phantom. The printing material was Polylactic Acid (PLA) (100% printing density). Low contrast scheme was achieved by creating air-holes with different diameters and thicknesses, ranging from 1mm to 9mm. The phantom was irradiated at a Philips Diagnost 93 fluoroscopic installation at 40kV-70kV with the semi-automatic mode. The images were recorded with an Agfa cr30-x CR system and assessed with ImageJ software. The best contrast value observed was approximately 33%. In low contrast detectability check it was found that the 1mm diameter hole was always visible, for thickness larger or equal to 4mm. A reason for not being able to distinguish 1mm in smaller thicknesses might be the presence of printing patterns on the final image, which increased the structure noise. In conclusion the construction of a contrast resolution phantom with a 3D printer is feasible. The quality of the final product depends upon the printer accuracy and the material characteristics.

Case study on risk evaluation of printed electronics using nanosilver ink.

PubMed

Kim, Ellen; Lee, Ji Hyun; Kim, Jin Kwon; Lee, Gun Ho; Ahn, Kangho; Park, Jung Duck; Yu, Il Je

2016-01-01

With the ever-increasing development of nanotechnology, our society is being surrounded by possible risks related to exposure to manufactured nanomaterials. The consumer market already includes many products that contain silver nanoparticles (AgNPs), including various household products, such as yoga mats, cutting boards, running shirts, and socks. There is a growing concern over the release of AgNPs in workplaces related to the manufacture and application of nanomaterials. This study investigated the release of AgNPs during the operation of a printed electronics printer. Using an exposure simulation chamber, a nanoparticle collector, scanning mobility particle sizer (SMPS), condensation particle counter (CPC), dust monitor, and mixed cellulose ester (MCE) filters are all connected to measure the AgNP exposure levels when operating a printed electronics printer. A very small amount of AgNPs was released during the operation of the printed electronics printer, and the number of AgNPs inside the exposure simulation chamber was lower than that outside background. In addition, when evaluating the potential risks for consumers and workers using a margin of exposure (MOE) approach and target MOE of 1000, the operational results far exceeded the target MOE in this simulation study and in a previous workplace exposure study. The overall results indicate a no-risk concern level in the case of printed electronics using nanosilver ink.

The unsuitability of HTML-based colour charts for estimating animal colours--a comment on Berggren and Merilä (2004).

PubMed

Stevens, Martin; Cuthill, Innes C

2005-08-30

A variety of techniques are used to study the colours of animal signals, including the use of visual matching to colour charts. This paper aims to highlight why they are generally an unsatisfactory tool for the measurement and classification of animal colours and why colour codes based on HTML (really RGB) standards, as advocated in a recent paper, are particularly inappropriate. There are many theoretical arguments against the use of colour charts, not least that human colour vision differs markedly from that of most other animals. However, the focus of this paper is the concern that, even when applied to humans, there is no simple 1:1 mapping from an RGB colour space to the perceived colours in a chart (the results are both printer- and illumination-dependent). We support our criticisms with data from colour matching experiments with humans, involving self-made, printed colour charts. Colour matching experiments with printed charts involving 11 subjects showed that the choices made by individuals were significantly different between charts that had exactly the same RGB values, but were produced from different printers. Furthermore, individual matches tended to vary under different lighting conditions. Spectrophotometry of the colour charts showed that the reflectance spectra of the charts varied greatly between printers and that equal steps in RGB space were often far from equal in terms of reflectance on the printed charts. In addition to outlining theoretical criticisms of the use of colour charts, our empirical results show that: individuals vary in their perception of colours, that different printers produce strikingly different results when reproducing what should be the same chart, and that the characteristics of the light irradiating the surface do affect colour perception. Therefore, we urge great caution in the use of colour charts to study animal colour signals. They should be used only as a last resort and in full knowledge of their limitations, with specially produced charts made to high industry standards.

SU-E-T-801: Verification of Dose Information Passed Through 3D-Printed Products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeong, S; Yoon, M; Kim, D

2015-06-15

Purpose: When quality assurance (QA) of patient treatment beam is performed, homogeneous water equivalent phantom which has different structure from patient’s internal structure is normally used. In these days, it is possible to make structures which have same shapes of human organs with commercialization of 3D-printer. As a Result, structures with same shape of human organs made by 3D-printer could be used to test qualification of treatment beam with greater accuracy than homogeneous water phantom. In this study, we estimated the dose response of 3D-printer materials to test the probability as a humanoid phantom or new generation of compensator tool.more » Methods: The rectangular products with variety densities (50%, 75% and 100%) were made to verify their characteristics. The products for experiment group and solid water phantom and air for control group with 125 cubic centimeters were put on solid water phantom with enough thickness. CT image of two products were acquired to know their HU values and to know about their radiologic characteristics. 6MV beams with 500MU were exposed for each experiment. Doses were measured behind the 3D-printed products. These measured doses were compared to the results taken by TPS. Results: Absorbed dose penetrated from empty air is normalized to 100%. Doses measured from 6MV photon beams penetrated from 50%, 75% and 100% products were 99%, 96% and 84%, respectively. HU values of 50%, 75% and 100% products are about −910, −860 and −10. Conclusion: 3D-printer can produce structures which have similar characteristics with human organ. These results would be used to make similar phantoms with patient information. This work was supported by the Nuclear Safety Research Program (Grant No. 1305033 and 1403019) of the Korea Radiation Safety Foundation and the Nuclear Safety and Security Commission and Radiation Technology Development Program (2013M2A2A4027117) of the Republic of Korea.« less

SU-C-213-03: Custom 3D Printed Boluses for Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, B; Yang, M; Yan, Y

2015-06-15

Purpose: To develop a clinical workflow and to commission the process of creating custom 3d printed boluses for radiation therapy. Methods: We designed a workflow to create custom boluses using a commercial 3D printer. Contours of several patients were deformably mapped to phantoms where the test bolus contours were designed. Treatment plans were created on the phantoms following our institutional planning guideline. The DICOM file of the bolus contours were then converted to stereoLithography (stl) file for the 3d printer. The boluses were printed on a commercial 3D printer using polylactic acid (PLA) material. Custom printing parameters were optimized inmore » order to meet the requirement of bolus composition. The workflow was tested on multiple anatomical sites such as skull, nose and chest wall. The size of boluses varies from 6×9cm2 to 12×25cm2. To commission the process, basic CT and dose properties of the printing materials were measured in photon and electron beams and compared against water and soft superflab bolus. Phantoms were then scanned to confirm the placement of custom boluses. Finally dose distributions with rescanned CTs were compared with those computer-generated boluses. Results: The relative electron density(1.08±0.006) of the printed boluses resemble those of liquid tap water(1.04±0.004). The dosimetric properties resemble those of liquid tap water(1.04±0.004). The dosimetric properties were measured at dmax with an ion chamber in electron and photon open beams. Compared with solid water and soft bolus, the output difference was within 1% for the 3D printer material. The printed boluses fit well to the phantom surfaces on CT scans. The dose distribution and DVH based on the printed boluses match well with those based on TPS generated boluses. Conclusion: 3d printing provides a cost effective and convenient solution for patient-specific boluses in radiation therapy.« less

Advances in digital printing and quality considerations of digitally printed images

NASA Astrophysics Data System (ADS)

Waes, Walter C.

1997-02-01

The traditional 'graphic arts' market has changed very rapidly. It has been only ten years now since Aldus introduced its 'PageMaker' software for text and layout. The platform used was Apple-Mac, which became also the standard for many other graphic applications. The so-called high-end workstations disappeared. This was the start for what later was called: the desk top publishing revolution. At the same time, image scanning became also user-friendly and heavy duty scanners were reduced to desktop-size. Color- reproduction became a commodity product. Since then, the pre-press industry has been going through a technical nightmare, trying to keep up with the digital explosion. One after another, tasks and crafts of pre-press were being transformed by digital technologies. New technologies in this field came almost too fast for many people to adapt. The next digital revolution will be for the commercial printers. All the reasons are explained later in this document. There is now a definite need for a different business-strategy and a new positioning in the electronic media-world. Niches have to be located for new graphic arts- applications. Electronic services to-and-from originators' and executors environments became a requirement. Data can now flow on-line between the printer and the originator of the job. It is no longer the pre-press shop who is controlling this. In many cases, electronic data goes between the print-buyer or agency and the printer. High power communication-systems with accepted standard color- management are transforming the printer, and more particularly, the pre-press shop fatally. The new digital printing market, now in the beginning of its expected full expansion, has to do with growing requests coming from agencies and other print-buyers for: (1) short-run printing; (2) print-on-demand approximately in-time; (3) personalization or other forms of customization; (4) quick turnaround.

WE-D-18A-05: Construction of Realistic Liver Phantoms From Patient Images and a Commercial 3D Printer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leng, S; Vrieze, T; Kuhlmann, J

2014-06-15

Purpose: To assess image quality and radiation dose reduction in abdominal CT imaging, physical phantoms having realistic background textures and lesions are highly desirable. The purpose of this work was to construct a liver phantom with realistic background and lesions using patient CT images and a 3D printer. Methods: Patient CT images containing liver lesions were segmented into liver tissue, contrast-enhanced vessels, and liver lesions using commercial software (Mimics, Materialise, Belgium). Stereolithography (STL) files of each segmented object were created and imported to a 3D printer (Object350 Connex, Stratasys, MN). After test scans were performed to map the eight availablemore » printing materials into CT numbers, printing materials were assigned to each object and a physical liver phantom printed. The printed phantom was scanned on a clinical CT scanner and resulting images were compared with the original patient CT images. Results: The eight available materials used to print the liver phantom had CT number ranging from 62 to 117 HU. In scans of the liver phantom, the liver lesions and veins represented in the STL files were all visible. Although the absolute value of the CT number in the background liver material (approx. 85 HU) was higher than in patients (approx. 40 HU), the difference in CT numbers between lesions and background were representative of the low contrast values needed for optimization tasks. Future work will investigate materials with contrast sufficient to emulate contrast-enhanced arteries. Conclusion: Realistic liver phantoms can be constructed from patient CT images using a commercial 3D printer. This technique may provide phantoms able to determine the effect of radiation dose reduction and noise reduction techniques on the ability to detect subtle liver lesions in the context of realistic background textures.« less

WE-F-16A-05: Use of 3D-Printers to Create a Tissue Equivalent 3D-Bolus for External Beam Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burleson, S; Baker, J; Hsia, A

2014-06-15

Purpose: The purpose of this project is to demonstrate that a non-expensive 3D-printer can be used to manufacture a 3D-bolus for external beam therapy. The printed bolus then can be modeled in our treatment planning system to ensure accurate dose delivery to the patient. Methods: We developed a simple method to manufacture a patient-specific custom 3Dbolus. The bolus is designed using Eclipse Treatment Planning System, contoured onto the patients CT images. The bolus file is exported from Eclipse to 3D-printer software, and then printed using a 3D printer. Various tests were completed to determine the properties of the printing material.more » Percent depth dose curves in this material were measured with electron and photon beams for comparison to other materials. In order to test the validity of the 3D printed bolus for treatment planning, a custom bolus was printed and tested on the Rando phantom using film for a dose plane comparison. We compared the dose plane measured on the film to the same dose plane exported from our treatment planning system using Film QA software. The gamma-dose distribution tool was used in our film analysis. Results: We compared point measurements throughout the dose plane and were able to achieve greater than 95% passing rate at 3% dose difference and 3 mm distance to agreement, which is our departments acceptable gamma pixel parameters. Conclusion: The printed 3D bolus has proven to be accurately modeled in our treatment planning system, it is more conformal to the patient surface and more durable than other bolus currently used (wax, superflab etc.). It is also more convenient and less costly than comparable bolus from milling machine companies.« less

Flavivirus and Filovirus EvoPrinters: New alignment tools for the comparative analysis of viral evolution.

PubMed

Brody, Thomas; Yavatkar, Amarendra S; Park, Dong Sun; Kuzin, Alexander; Ross, Jermaine; Odenwald, Ward F

2017-06-01

Flavivirus and Filovirus infections are serious epidemic threats to human populations. Multi-genome comparative analysis of these evolving pathogens affords a view of their essential, conserved sequence elements as well as progressive evolutionary changes. While phylogenetic analysis has yielded important insights, the growing number of available genomic sequences makes comparisons between hundreds of viral strains challenging. We report here a new approach for the comparative analysis of these hemorrhagic fever viruses that can superimpose an unlimited number of one-on-one alignments to identify important features within genomes of interest. We have adapted EvoPrinter alignment algorithms for the rapid comparative analysis of Flavivirus or Filovirus sequences including Zika and Ebola strains. The user can input a full genome or partial viral sequence and then view either individual comparisons or generate color-coded readouts that superimpose hundreds of one-on-one alignments to identify unique or shared identity SNPs that reveal ancestral relationships between strains. The user can also opt to select a database genome in order to access a library of pre-aligned genomes of either 1,094 Flaviviruses or 460 Filoviruses for rapid comparative analysis with all database entries or a select subset. Using EvoPrinter search and alignment programs, we show the following: 1) superimposing alignment data from many related strains identifies lineage identity SNPs, which enable the assessment of sublineage complexity within viral outbreaks; 2) whole-genome SNP profile screens uncover novel Dengue2 and Zika recombinant strains and their parental lineages; 3) differential SNP profiling identifies host cell A-to-I hyper-editing within Ebola and Marburg viruses, and 4) hundreds of superimposed one-on-one Ebola genome alignments highlight ultra-conserved regulatory sequences, invariant amino acid codons and evolutionarily variable protein-encoding domains within a single genome. EvoPrinter allows for the assessment of lineage complexity within Flavivirus or Filovirus outbreaks, identification of recombinant strains, highlights sequences that have undergone host cell A-to-I editing, and identifies unique input and database SNPs within highly conserved sequences. EvoPrinter's ability to superimpose alignment data from hundreds of strains onto a single genome has allowed us to identify unique Zika virus sublineages that are currently spreading in South, Central and North America, the Caribbean, and in China. This new set of integrated alignment programs should serve as a useful addition to existing tools for the comparative analysis of these viruses.

40 CFR 1068.450 - What records must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

..., send us a written request with justification for a waiver. (e) We may post test results on publicly..., send us a report with the following information: (1) Describe any facility used to test production-line... of tests for each family. (3) Describe your test engines/equipment, including the family's...

40 CFR 1068.450 - What records must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., send us a written request with justification for a waiver. (e) We may post test results on publicly..., send us a report with the following information: (1) Describe any facility used to test production-line... of tests for each family. (3) Describe your test engines/equipment, including the family's...

40 CFR 1068.450 - What records must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

..., send us a written request with justification for a waiver. (e) We may post test results on publicly..., send us a report with the following information: (1) Describe any facility used to test production-line... of tests for each family. (3) Describe your test engines/equipment, including the family's...

77 FR 45359 - Medical Device User Fee Rates for Fiscal Year 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... the following account information when sending a wire transfer: New York Federal Reserve Bank, U.S... ensure that your invoice is fully paid. Use the following account information when sending a wire... following account information when sending a wire transfer: New York Federal Reserve Bank, U.S. Dept of...

Aspirin Desensitization

MedlinePlus

... Nerve Decompression Dacryocystorhinostomy (DCR) Disclosure Statement Printer Friendly Aspirin Desensitization Kevin C. Welch, MD Zara Patel, MD Introduction The term "aspirin-sensitive asthma" (also known as "aspirin triad" or " ...

7 CFR 400.202 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and software, data communications hardware and software, and printers utilized with the system. (e...), International Business Systems (IBM)-defined, byte controlled communications protocol, using control characters...

7 CFR 400.202 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and software, data communications hardware and software, and printers utilized with the system. (e...), International Business Systems (IBM)-defined, byte controlled communications protocol, using control characters...

INCITS W1.1 development update: appearance-based image quality standards for printers

NASA Astrophysics Data System (ADS)

Zeise, Eric K.; Rasmussen, D. René; Ng, Yee S.; Dalal, Edul; McCarthy, Ann; Williams, Don

2008-01-01

In September 2000, INCITS W1 (the U.S. representative of ISO/IEC JTC1/SC28, the standardization committee for office equipment) was chartered to develop an appearance-based image quality standard. (1),(2) The resulting W1.1 project is based on a proposal (3) that perceived image quality can be described by a small set of broad-based attributes. There are currently six ad hoc teams, each working towards the development of standards for evaluation of perceptual image quality of color printers for one or more of these image quality attributes. This paper summarizes the work in progress of the teams addressing the attributes of Macro-Uniformity, Colour Rendition, Gloss & Gloss Uniformity, Text & Line Quality and Effective Resolution.

3D Digitization and Prototyping of the Skull for Practical Use in the Teaching of Human Anatomy.

PubMed

Lozano, Maria Teresa Ugidos; Haro, Fernando Blaya; Diaz, Carlos Molino; Manzoor, Sadia; Ugidos, Gonzalo Ferrer; Mendez, Juan Antonio Juanes

2017-05-01

The creation of new rapid prototyping techniques, low cost 3D printers as well as the creation of new software for these techniques have allowed the creation of 3D models of bones making their application possible in the field of teaching anatomy in the faculties of Health Sciences. The 3D model of cranium created in the present work, at full scale, present accurate reliefs and anatomical details that are easily identifiable by undergraduate students in their use for the study of human anatomy. In this article, the process of scanning the skull and the subsequent treatment of these images with specific software until the generation of 3D model using 3D printer has been reported.

Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing.

PubMed

Li, Jia; Rossignol, Fabrice; Macdonald, Joanne

2015-06-21

Inkjet printing is emerging at the forefront of biosensor fabrication technologies. Parallel advances in both ink chemistry and printers have led to a biosensor manufacturing approach that is simple, rapid, flexible, high resolution, low cost, efficient for mass production, and extends the capabilities of devices beyond other manufacturing technologies. Here we review for the first time the factors behind successful inkjet biosensor fabrication, including printers, inks, patterning methods, and matrix types. We discuss technical considerations that are important when moving beyond theoretical knowledge to practical implementation. We also highlight significant advances in biosensor functionality that have been realised through inkjet printing. Finally, we consider future possibilities for biosensors enabled by this novel combination of chemistry and technology.

Bedside determination of bicarbonate and base excess, blood oxygen saturation and content, VD/VT, and P50 using a programmable calculator.

PubMed

Wilkinson, P L

1979-06-01

Assessing and modifying oxygen transport are major parts of ICU patient management. Determination of base excess, blood oxygen saturation and content, dead space ventilation, and P50 helps in this management. A program is described for determining these variables using a T1 59 programmable calculator and PC 100A printer. Each variable can be independently calculated without running the whole program. The calculator-printer's small size, low cost, and hard copy printout make it a valuable and versatile tool for calculating physiological variables. The program is easily entered by an stored on magnetic card, and prompts the user to enter the appropriate variables, making is easy to run by untrained personnel.

Fabrication of cerebral aneurysm simulator with a desktop 3D printer

PubMed Central

Liu, Yu; Gao, Qing; Du, Song; Chen, ZiChen; Fu, JianZhong; Chen, Bing; Liu, ZhenJie; He, Yong

2017-01-01

Now, more and more patients are suffering cerebral aneurysm. However, long training time limits the rapid growth of cerebrovascular neurosurgeons. Here we developed a novel cerebral aneurysm simulator which can be better represented the dynamic bulging process of cerebral aneurysm The proposed simulator features the integration of a hollow elastic vascular model, a skull model and a brain model, which can be affordably fabricated at the clinic (Fab@Clinic), under $25.00 each with the help of a low-cost desktop 3D printer. Moreover, the clinical blood flow and pulsation pressure similar to the human can be well simulated, which can be used to train the neurosurgical residents how to clip aneurysms more effectively. PMID:28513626

3D printing in social education: Eki-Fab and student PBL

NASA Astrophysics Data System (ADS)

Makino, Masato; Saito, Azusa; Kodama, Mai; Takamatsu, Kyuuichiro; Tamate, Hideaki; Sakai, Kazuyuki; Wada, Masato; Khosla, Ajit; Kawakami, Masaru; Furukawa, Hidemitsu

2017-04-01

Additive manufacturing or 3D printer is one of the most innovative material processing methods. We are considering that human resources for 3D printing would be needed in the future. To educate the abilities of the digital fabrication, we have the public digital fabrication space "Eki-Fab" for junior and high school students and Project Based Learning (PBL) class for undergraduate students. Eki-Fab is held on every Saturday at the Yonezawa train station. In the "Eki-Fab", anybody can study the utilizing of 3D printer and modeling technics under the instruction of staff in Yamagata University. In the PBL class, we have the class every Thursday. The students get the techniques of the digital fabrication through the PBL.

49 CFR 40.51 - What materials are used to send urine specimens to the laboratory?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false What materials are used to send urine specimens to the laboratory? 40.51 Section 40.51 Transportation Office of the Secretary of Transportation... and Supplies Used in DOT Urine Collections § 40.51 What materials are used to send urine specimens to...

49 CFR 40.51 - What materials are used to send urine specimens to the laboratory?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What materials are used to send urine specimens to the laboratory? 40.51 Section 40.51 Transportation Office of the Secretary of Transportation... and Supplies Used in DOT Urine Collections § 40.51 What materials are used to send urine specimens to...

49 CFR 40.51 - What materials are used to send urine specimens to the laboratory?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false What materials are used to send urine specimens to the laboratory? 40.51 Section 40.51 Transportation Office of the Secretary of Transportation... and Supplies Used in DOT Urine Collections § 40.51 What materials are used to send urine specimens to...

49 CFR 40.51 - What materials are used to send urine specimens to the laboratory?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false What materials are used to send urine specimens to the laboratory? 40.51 Section 40.51 Transportation Office of the Secretary of Transportation... and Supplies Used in DOT Urine Collections § 40.51 What materials are used to send urine specimens to...

49 CFR 40.51 - What materials are used to send urine specimens to the laboratory?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false What materials are used to send urine specimens to the laboratory? 40.51 Section 40.51 Transportation Office of the Secretary of Transportation... and Supplies Used in DOT Urine Collections § 40.51 What materials are used to send urine specimens to...

42 CFR 137.171 - Where do Self-Governance Tribes send their audit reports?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Where do Self-Governance Tribes send their audit reports? 137.171 Section 137.171 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN... Provisions Audits and Cost Principles § 137.171 Where do Self-Governance Tribes send their audit reports? (a...

20 CFR 408.610 - When will we send your SVB payments to a representative payee?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false When will we send your SVB payments to a representative payee? 408.610 Section 408.610 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Representative Payment § 408.610 When will we send your SVB payments...

20 CFR 408.610 - When will we send your SVB payments to a representative payee?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false When will we send your SVB payments to a representative payee? 408.610 Section 408.610 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Representative Payment § 408.610 When will we send your SVB payments...

14 CFR 330.23 - To what address must air carriers send their applications?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false To what address must air carriers send their applications? 330.23 Section 330.23 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... Application Procedures § 330.23 To what address must air carriers send their applications? (a) You must submit...

20 CFR 408.610 - When will we send your SVB payments to a representative payee?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false When will we send your SVB payments to a representative payee? 408.610 Section 408.610 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Representative Payment § 408.610 When will we send your SVB payments...

20 CFR 408.610 - When will we send your SVB payments to a representative payee?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false When will we send your SVB payments to a representative payee? 408.610 Section 408.610 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Representative Payment § 408.610 When will we send your SVB payments...

20 CFR 408.610 - When will we send your SVB payments to a representative payee?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false When will we send your SVB payments to a representative payee? 408.610 Section 408.610 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SPECIAL BENEFITS FOR CERTAIN WORLD WAR II VETERANS Representative Payment § 408.610 When will we send your SVB payments...

36 CFR 1238.28 - What must agencies do when sending permanent microform records to a records storage facility?

Code of Federal Regulations, 2012 CFR

2012-07-01

... sending permanent microform records to a records storage facility? 1238.28 Section 1238.28 Parks, Forests... MANAGEMENT Storage, Use, and Disposition of Microform Records § 1238.28 What must agencies do when sending permanent microform records to a records storage facility? Agencies must: (a) Follow the procedures in part...

36 CFR 1238.28 - What must agencies do when sending permanent microform records to a records storage facility?

Code of Federal Regulations, 2014 CFR

2014-07-01

... sending permanent microform records to a records storage facility? 1238.28 Section 1238.28 Parks, Forests... MANAGEMENT Storage, Use, and Disposition of Microform Records § 1238.28 What must agencies do when sending permanent microform records to a records storage facility? Agencies must: (a) Follow the procedures in part...

Sexting Among Married Couples: Who Is Doing It, and Are They More Satisfied?

PubMed

McDaniel, Brandon T; Drouin, Michelle

2015-11-01

This study examined the prevalence and correlates of sexting (i.e., sending sexual messages via mobile phones) within a sample of married/cohabiting couples (180 wives and 175 husbands). Married adults do sext each other, but it is much less common than within young adult relationships, and consists mainly of sexy or intimate talk (29% reported engaging in sexy talk with partners) rather than sexually explicit photos or videos (12% reported sending nude or nearly-nude photos). Sending sexy talk messages was positively related to relationship satisfaction only among those with high levels of avoidance, and sending sexually explicit pictures was related to satisfaction for men, and for women with high levels of attachment anxiety. Additionally, sending sexually explicit pictures was related to greater ambivalence among both men and women. These findings support and extend previous research with young adults.

The research and application of the NDP protocol vulnerability attack and the defense technology based on SEND

NASA Astrophysics Data System (ADS)

Xi, Huixing

2017-05-01

Neighbor discovery protocol (NDP) is the underlying protocol in the IPv6 protocol, which is mainly used to solve the problem of interconnection between nodes on the same link. But with wide use of IPV6, NDP becomes the main objects of a variety of attacks due to a lack of security mechanism. The paper introduces the working principle of the NDP and methods of how the SEND protocol to enhance NDP security defense. It also analyzes and summarizes the security threats caused by the defects of the protocol itself. On the basis of the SEND protocol, the NDP data packet structure is modified to enhance the security of the SEND. An improved NDP cheating defense technology is put forward to make up the defects of the SEND protocol which can't verify the correctness of the public key and cannot bind the MAC address.

Sexting Among Married Couples: Who Is Doing It, and Are They More Satisfied?

PubMed Central

Drouin, Michelle

2015-01-01

Abstract This study examined the prevalence and correlates of sexting (i.e., sending sexual messages via mobile phones) within a sample of married/cohabiting couples (180 wives and 175 husbands). Married adults do sext each other, but it is much less common than within young adult relationships, and consists mainly of sexy or intimate talk (29% reported engaging in sexy talk with partners) rather than sexually explicit photos or videos (12% reported sending nude or nearly-nude photos). Sending sexy talk messages was positively related to relationship satisfaction only among those with high levels of avoidance, and sending sexually explicit pictures was related to satisfaction for men, and for women with high levels of attachment anxiety. Additionally, sending sexually explicit pictures was related to greater ambivalence among both men and women. These findings support and extend previous research with young adults. PMID:26484980

40 CFR 1039.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) A copy of all applications and any summary information you send us. (2) Any of the information we... emission tests (such as test cell temperatures and relative humidity readings) for one year after we issue... long as you can promptly send us organized, written records in English if we ask for them. You must...

40 CFR 1039.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) A copy of all applications and any summary information you send us. (2) Any of the information we... emission tests (such as test cell temperatures and relative humidity readings) for one year after we issue... long as you can promptly send us organized, written records in English if we ask for them. You must...

40 CFR 1054.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2012 CFR

2012-07-01

... model year, you must send us a report describing information about engines you produced during the model... send us. (2) Any of the information we specify in § 1054.205 that you were not required to include in... certificate of conformity. (c) Keep data from routine emission tests (such as test cell temperatures and...

40 CFR 1039.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) A copy of all applications and any summary information you send us. (2) Any of the information we... emission tests (such as test cell temperatures and relative humidity readings) for one year after we issue... long as you can promptly send us organized, written records in English if we ask for them. You must...

40 CFR 1054.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2014 CFR

2014-07-01

... model year, you must send us a report describing information about engines you produced during the model... send us. (2) Any of the information we specify in § 1054.205 that you were not required to include in... certificate of conformity. (c) Keep data from routine emission tests (such as test cell temperatures and...

40 CFR 1054.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

... model year, you must send us a report describing information about engines you produced during the model... send us. (2) Any of the information we specify in § 1054.205 that you were not required to include in... certificate of conformity. (c) Keep data from routine emission tests (such as test cell temperatures and...

40 CFR 1054.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2011 CFR

2011-07-01

... model year, you must send us a report describing information about engines you produced during the model... send us. (2) Any of the information we specify in § 1054.205 that you were not required to include in... certificate of conformity. (c) Keep data from routine emission tests (such as test cell temperatures and...

40 CFR 1039.250 - What records must I keep and what reports must I send to EPA?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) A copy of all applications and any summary information you send us. (2) Any of the information we... emission tests (such as test cell temperatures and relative humidity readings) for one year after we issue... long as you can promptly send us organized, written records in English if we ask for them. You must...

41 CFR 102-118.505 - Must my agency send a voluntary refund to the Treasurer of the United States?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Must my agency send a... Information for All Claims § 102-118.505 Must my agency send a voluntary refund to the Treasurer of the United...

"Send Three- and Four-Pence; We're Going to a Dance": Forward Generating Research

ERIC Educational Resources Information Center

Edwards, Jan

2003-01-01

As my playful title suggests, I am referring to the process where the statement, "send reinforcements; we're going to advance," is said to have become, "send three- and fourpence; we're going to a dance." This quotation springs to mind when asked to think about how research gets picked up and recommendations from research are…

Special Educational Needs and Disabilities Reforms 2014: SENCos' Perspectives of the First Six Months

ERIC Educational Resources Information Center

Curran, Helen; Mortimore, Tilly; Riddell, Richard

2017-01-01

The Special Educational Needs and Disabilities (SEND) reforms have been reported as the most significant reforms of their kind for over 30 years. Through the Children and Families Act 2014 the Government is seeking to effect cultural change regarding SEND. The SENCo is responsible for the operational and strategic aspects related to SEND provision…

29 CFR 4000.28 - What if I send a computer disk?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

29 CFR 4000.28 - What if I send a computer disk?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

29 CFR 4000.28 - What if I send a computer disk?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

36 CFR § 1238.28 - What must agencies do when sending permanent microform records to a records storage facility?

Code of Federal Regulations, 2013 CFR

2013-07-01

... sending permanent microform records to a records storage facility? § 1238.28 Section § 1238.28 Parks... RECORDS MANAGEMENT Storage, Use, and Disposition of Microform Records § 1238.28 What must agencies do when sending permanent microform records to a records storage facility? Agencies must: (a) Follow the...

36 CFR 1011.4 - What notice will the Presidio Trust send to a debtor when collecting a debt?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PRESIDIO TRUST DEBT COLLECTION Procedures To Collect Presidio Trust Debts § 1011.4 What notice will the Presidio Trust send to a debtor when collecting a debt? (a) Notice requirements. The Presidio Trust will aggressively collect debts. The Presidio Trust will send at least one written notice to a debtor informing the...

29 CFR 4000.28 - What if I send a computer disk?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

29 CFR 4000.28 - What if I send a computer disk?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

1401377

NASA Image and Video Library

2014-09-16

GROUP PHOTOGRAPH OF MEMBERS OF THE 3-D PRINTER TEAM IN THE ADDITIVE MANUFACTURING LAB IN BUILDING 4707. (L TO R) RAYMOND (CORKY) CLINTON, NIKKI WERKHEISER; QUINCY BEAN; RICK RYAN; AND JENNIFER EDMUNSON

Software Reviews.

ERIC Educational Resources Information Center

Kimball, Jeffrey P.; And Others

1987-01-01

Describes a variety of computer software. The packages reviewed include a variety of simulations, a spread sheet, a printer driver and an alternative operating system for DBM.PCs and compatible programs. (BSR)

New Directions in the NOAO Observing Proposal System

NASA Astrophysics Data System (ADS)

Gasson, David; Bell, Dave

For the past eight years NOAO has been refining its on-line observing proposal system. Virtually all related processes are now handled electronically. Members of the astronomical community can submit proposals through email, web form, or via the Gemini Phase I Tool. NOAO staff can use the system to do administrative tasks, scheduling, and compilation of various statistics. In addition, all information relevant to the TAC process is made available on-line, including the proposals themselves (in HTML, PDF and PostScript) and technical comments. Grades and TAC comments are entered and edited through web forms, and can be sorted and filtered according to specified criteria. Current developments include a move away from proprietary solutions, toward open standards such as SQL (in the form of the MySQL relational database system), Perl, PHP and XML.

Summer study postscript: A 1986 perspective

NASA Technical Reports Server (NTRS)

Harris, Philip R.

1992-01-01

Now that the National Commission on Space has set out bold goals and strategies for the American space program in the nest 50 years, how these visions can be turned into reality is examined. Since the Challenger tragedy and other space failures have brought about a crisis of confidence at NASA, innovations are necessary to rebuild public consensus and support. Initiatives by the private sector must promote the peaceful use of space by its exploration and industrialization. The faculty fellows from the 1984 summer study propose three possibilities for action by NASA and supporters of the space program. They are: A national lottery for space enterprises; A White House conference on space enterprise; and Reorganization of NASA. These ideas are briefly explored. and exploitation of space resources, such as on the asteroids and on Mars.

Low-cost Method for Obtaining Medical Rapid Prototyping Using Desktop 3D printing: A Novel Technique for Mandibular Reconstruction Planning.

PubMed

Velasco, Ignacio; Vahdani, Soheil; Ramos, Hector

2017-09-01

Three-dimensional (3D) printing is relatively a new technology with clinical applications, which enable us to create rapid accurate prototype of the selected anatomic region, making it possible to plan complex surgery and pre-bend hardware for individual surgical cases. This study aimed to express our experience with the use of medical rapid prototype (MRP) of the maxillofacial region created by desktop 3D printer and its application in maxillofacial reconstructive surgeries. Three patients with benign mandible tumors were included in this study after obtaining informed consent. All patient's maxillofacial CT scan data was processed by segmentation and isolation software and mandible MRP was printed using our desktop 3D printer. These models were used for preoperative surgical planning and prebending of the reconstruction plate. MRP created by desktop 3D printer is a cost-efficient, quick and easily produced appliance for the planning of reconstructive surgery. It can contribute in patient orientation and helping them in a better understanding of their condition and proposed surgical treatment. It helps surgeons for pre-operative planning in the resection or reconstruction cases and represent an excellent tool in academic setting for residents training. The pre-bended reconstruction plate based on MRP, resulted in decreased surgery time, cost and anesthesia risks on the patients. Key words: 3D printing, medical modeling, rapid prototype, mandibular reconstruction, ameloblastoma.

Full 3-dimensional digital workflow for multicomponent dental appliances: A proof of concept.

PubMed

van der Meer, W Joerd; Vissink, Arjan; Ren, Yijin

2016-04-01

The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. The authors scanned a volunteer's dentition with an intraoral scanner (Lava Chairside Oral Scanner C.O.S., 3M). A digital impression was used to design 2 multicomponent orthodontic appliances. Biocompatible acrylic baseplates were produced with the aid of a 3D printer. The metal springs and clasps were produced by a bending robot. The fit of the 2 appliances was assessed by 2 experienced orthodontists. The authors assessed both orthodontic appliances with the volunteer's dentition and found the fit to be excellent. Clinicians can fully produce a multicomponent dental appliance consisting of both an acrylic baseplate and other parts, such as clasps, springs, or screws, using a digital workflow process without the need for a physical model of the patient's dentition. Plaster models can be superfluous for orthodontic treatment as digital models can be used in all phases of a full digital workflow in orthodontics. The arduous task of making a multicomponent dental appliance that involves bending wires can possibly be replaced by a computer, design software, a 3D printer, and a bending robot. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

3D Printing Factors Important for the Fabrication of Polyvinylalcohol Filament-Based Tablets.

PubMed

Tagami, Tatsuaki; Fukushige, Kaori; Ogawa, Emi; Hayashi, Naomi; Ozeki, Tetsuya

2017-01-01

Three-dimensional (3D) printers have been applied in many fields, including engineering and the medical sciences. In the pharmaceutical field, approval of the first 3D-printed tablet by the U.S. Food and Drug Administration in 2015 has attracted interest in the manufacture of tablets and drugs by 3D printing techniques as a means of delivering tailor-made drugs in the future. In current study, polyvinylalcohol (PVA)-based tablets were prepared using a fused-deposition-modeling-type 3D printer and the effect of 3D printing conditions on tablet production was investigated. Curcumin, a model drug/fluorescent marker, was loaded into PVA-filament. We found that several printing parameters, such as the rate of extruding PVA (flow rate), can affect the formability of the resulting PVA-tablets. The 3D-printing temperature is controlled by heating the print nozzle and was shown to affect the color of the tablets and their curcumin content. PVA-based infilled tablets with different densities were prepared by changing the fill density as a printing parameter. Tablets with lower fill density floated in an aqueous solution and their curcumin content tended to dissolve faster. These findings will be useful in developing drug-loaded PVA-based 3D objects and other polymer-based articles prepared using fused-deposition-modeling-type 3D printers.

Moving toward rapid and low-cost point-of-care molecular diagnostics with a repurposed 3D printer and RPA.

PubMed

Chan, Kamfai; Wong, Pui-Yan; Parikh, Chaitanya; Wong, Season

2018-03-15

Traditionally, the majority of nucleic acid amplification-based molecular diagnostic tests are done in centralized settings. In recent years, point-of-care tests have been developed for use in low-resource settings away from central laboratories. While most experts agree that point-of-care molecular tests are greatly needed, their availability as cost-effective and easy-to-operate tests remains an unmet goal. In this article, we discuss our efforts to develop a recombinase polymerase amplification reaction-based test that will meet these criteria. First, we describe our efforts in repurposing a low-cost 3D printer as a platform that can carry out medium-throughput, rapid, and high-performing nucleic acid extraction. Next, we address how these purified templates can be rapidly amplified and analyzed using the 3D printer's heated bed or the deconstructed, low-cost thermal cycler we have developed. In both approaches, real-time isothermal amplification and detection of template DNA or RNA can be accomplished using a low-cost portable detector or smartphone camera. Last, we demonstrate the capability of our technologies using foodborne pathogens and the Zika virus. Our low-cost approach does not employ complicated and high-cost components, making it suitable for resource-limited settings. When integrated and commercialized, it will offer simple sample-to-answer molecular diagnostics. Copyright © 2018 Elsevier Inc. All rights reserved.

Anatomical Reproducibility of a Head Model Molded by a Three-dimensional Printer

PubMed Central

KONDO, Kosuke; NEMOTO, Masaaki; MASUDA, Hiroyuki; OKONOGI, Shinichi; NOMOTO, Jun; HARADA, Naoyuki; SUGO, Nobuo; MIYAZAKI, Chikao

We prepared rapid prototyping models of heads with unruptured cerebral aneurysm based on image data of computed tomography angiography (CTA) using a three-dimensional (3D) printer. The objective of this study was to evaluate the anatomical reproducibility and accuracy of these models by comparison with the CTA images on a monitor. The subjects were 22 patients with unruptured cerebral aneurysm who underwent preoperative CTA. Reproducibility of the microsurgical anatomy of skull bone and arteries, the length and thickness of the main arteries, and the size of cerebral aneurysm were compared between the CTA image and rapid prototyping model. The microsurgical anatomy and arteries were favorably reproduced, apart from a few minute regions, in the rapid prototyping models. No significant difference was noted in the measured lengths of the main arteries between the CTA image and rapid prototyping model, but errors were noted in their thickness (p < 0.001). A significant difference was also noted in the longitudinal diameter of the cerebral aneurysm (p < 0.01). Regarding the CTA image as the gold standard, reproducibility of the microsurgical anatomy of skull bone and main arteries was favorable in the rapid prototyping models prepared using a 3D printer. It was concluded that these models are useful tools for neurosurgical simulation. The thickness of the main arteries and size of cerebral aneurysm should be comprehensively judged including other neuroimaging in consideration of errors. PMID:26119896

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites

PubMed Central

Skorski, Matthew R.; Esenther, Jake M.; Ahmed, Zeeshan; Miller, Abigail E.; Hartings, Matthew R.

2016-01-01

Abstract To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO2 compositions of 1, 5, and 10% (kg/kg) and printed structures using a commercial 3D printer. Our experiments suggest that ABS undergoes minor degradation in the presence of TiO2 during the different processing steps. The measured mechanical properties (strain and Young’s modulus) for all of the composites are similar to those of structures printed from the pure polymer. TiO2 incorporation at 1% negatively affects the stress at breaking point and the flexural stress. Structures produced from the 5 and 10% nanocomposites display a higher breaking point stress than those printed from the pure polymer. TiO2 within the printed matrix was able to quench the intrinsic fluorescence of the polymer. TiO2 was also able to photocatalyze the degradation of a rhodamine 6G in solution. These experiments display chemical reactivity in nanocomposites that are printed using commercial 3D printers, and we expect that our methodology will help to inform others who seek to incorporate catalytic nanoparticles in 3D printed structures. PMID:27375367

Open-Source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics.

PubMed

Pearce, J M; Anzalone, N C; Heldt, C L

2016-08-01

The open-source release of self-replicating rapid prototypers (RepRaps) has created a rich opportunity for low-cost distributed digital fabrication of complex 3-D objects such as scientific equipment. For example, 3-D printable reactionware devices offer the opportunity to combine open hardware microfluidic handling with lab-on-a-chip reactionware to radically reduce costs and increase the number and complexity of microfluidic applications. To further drive down the cost while improving the performance of lab-on-a-chip paper-based microfluidic prototyping, this study reports on the development of a RepRap upgrade capable of converting a Prusa Mendel RepRap into a wax 3-D printer for paper-based microfluidic applications. An open-source hardware approach is used to demonstrate a 3-D printable upgrade for the 3-D printer, which combines a heated syringe pump with the RepRap/Arduino 3-D control. The bill of materials, designs, basic assembly, and use instructions are provided, along with a completely free and open-source software tool chain. The open-source hardware device described here accelerates the potential of the nascent field of electrochemical detection combined with paper-based microfluidics by dropping the marginal cost of prototyping to nearly zero while accelerating the turnover between paper-based microfluidic designs. © 2016 Society for Laboratory Automation and Screening.

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites.

PubMed

Skorski, Matthew; Esenther, Jake; Ahmed, Zeeshan; Miller, Abigail E; Hartings, Matthew R

To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO 2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO 2 compositions of 1%, 5%, and 10% (kg/kg) and printed structures using a commercial 3D printer. Our experiments suggest that ABS undergoes minor degradation in the presence of TiO 2 during the different processing steps. The measured mechanical properties (strain and Young's modulus) for all of the composites are similar to those of structures printed from the pure polymer. TiO 2 incorporation at 1% negatively affects the stress at breaking point and the flexural stress. Structures produced from the 5 and 10% nanocomposites display a higher breaking point stress than those printed from the pure polymer. TiO 2 within the printed matrix was able to quench the intrinsic fluorescence of the polymer. TiO 2 was also able to photocatalyze the degradation of a rhodamine 6G in solution. These experiments display chemical reactivity in nanocomposites that are printed using commercial 3D printers, and we expect that our methodology will help to inform others who seek to incorporate catalytic nanoparticles in 3D printed structures.

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO2-ABS nanocomposites

NASA Astrophysics Data System (ADS)

Skorski, Matthew R.; Esenther, Jake M.; Ahmed, Zeeshan; Miller, Abigail E.; Hartings, Matthew R.

2016-01-01

To expand the chemical capabilities of 3D printed structures generated from commercial thermoplastic printers, we have produced and printed polymer filaments that contain inorganic nanoparticles. TiO2 was dispersed into acrylonitrile butadiene styrene (ABS) and extruded into filaments with 1.75 mm diameters. We produced filaments with TiO2 compositions of 1, 5, and 10% (kg/kg) and printed structures using a commercial 3D printer. Our experiments suggest that ABS undergoes minor degradation in the presence of TiO2 during the different processing steps. The measured mechanical properties (strain and Young's modulus) for all of the composites are similar to those of structures printed from the pure polymer. TiO2 incorporation at 1% negatively affects the stress at breaking point and the flexural stress. Structures produced from the 5 and 10% nanocomposites display a higher breaking point stress than those printed from the pure polymer. TiO2 within the printed matrix was able to quench the intrinsic fluorescence of the polymer. TiO2 was also able to photocatalyze the degradation of a rhodamine 6G in solution. These experiments display chemical reactivity in nanocomposites that are printed using commercial 3D printers, and we expect that our methodology will help to inform others who seek to incorporate catalytic nanoparticles in 3D printed structures.

Orbital Decompression

MedlinePlus

... A Complications of Sinusitis Epistaxis (Nosebleeds) Allergic Rhinitis (Hay Fever) Headaches and Sinus Disease Disorders of Smell & ... DCR) Disclosure Statement Printer Friendly Orbital Decompression John Lee, MD INTRODUCTION Orbital decompression is a surgical procedure ...

Predicting transmittance spectra of electrophotographic color prints

NASA Astrophysics Data System (ADS)

Mourad, Safer; Emmel, Patrick; Hersch, Roger D.

2000-12-01

For dry toner electrophotographic color printers, we present a numerical simulation model describing the color printer responses based on a physical characterization of the different electrophotographic process steps. The proposed model introduces a Cross Transfer Efficiency designed to predict the color transmittance spectra of multi-color prints by taking into account the transfer influence of each deposited color toner layer upon the other layers. The simulation model leads to a better understanding of the factors that have an impact on printing quality. In order to avoid the additional optical non-linearities produced by light reflection on paper, we have limited the present investigation to transparency prints. The proposed model succeeded to predict the transmittance spectra of printed wedges combining two color toner layers with a mean deviation less than CIE-LAB (Delta) E equals 2.5.

A Ground-Based Study on Extruder Standoff Distance for the 3D Printing in Zero Gravity Technology Demonstration Mission

NASA Technical Reports Server (NTRS)

Prater, T. J.; Bean, Q. A.; Werkheiser, N. J.; Beshears, R. D.; Rolin, T. D.; Rabenberg, E. M.; Soohoo, H. A.; Ledbetter, F. E., III; Bell, S. C.

2017-01-01

Analysis of phase I specimens produced as part of the 3D printing in zero G technology demonstration mission exhibited some differences in structure and performance for specimens printed onboard the International Space Station (ISS) and specimens produced on the ground with the same printer prior to its launch. This study uses the engineering test unit for the printer, identical to the unit on ISS, to conduct a ground-based investigation of the impact of the distance between the extruder tip and the build tray on material outcomes. This standoff distance was not held constant for the phase I flight prints and is hypothesized to be a major source of the material variability observed in the phase I data set.

The impact of dispersion on selective laser melting of titanium and niobium fine powders mixture

NASA Astrophysics Data System (ADS)

Razin, A.; Ovchinnikov, V.; Akhmetshin, R.; Krinitcyn, M.; Fedorov, V.; Akhmetshina, V.

2016-11-01

This paper is dedicated to the study of selective laser melting process of metal powders. Experiments were performed in the Research Center Modern Manufacturing Technologies of TPU with the fine powders of titanium and niobium. The research was carried out on 3D laser printer designed at TPU. In the framework of experiments aimed at determining possibilities of obtaining niobium-titanium alloy by SLS (selective laser sintering) there were studied the basic processes of laser melting and their effect on the quality of final samples and products. We determined operation modes of 3D printers which allow obtaining high quality of printed sample surface. The research results show that rigid requirements related to powder dispersiveness and proportions are needed to achieve better quality of products.

Pseudoisochromatic test plate colour representation dependence on printing technology

NASA Astrophysics Data System (ADS)

Luse, K.; Fomins, S.; Ozolinsh, M.

2012-08-01

The aim of the study is to determine best printing technology for creation of colour vision deficiency tests. Valid tests for protanopia and deuteranopia were created from perceived colour matching experiments from printed colour samples by colour deficient individuals. Calibrated EpsonStylus Pro 7800 printer for ink prints and Noritsu HD 3701 digital printer for photographic prints were used. Multispectral imagery (by tunable liquid crystal filters system CRI Nuance Vis 07) data analysis show that in case of ink prints, the measured pixel colour coordinate dispersion (in the CIExy colour diagram) of similar colour arrays is smaller than in case of photographic printing. The print quality in terms of colour coordinate dispersion for printing methods used is much higher than in case of commercially available colour vision deficiency tests.

3D Printing of Bench

NASA Image and Video Library

2018-02-09

Nathan Gelino, a NASA research engineer at Kennedy Space Center in Florida, is working on a Zero Launch Mass 3-D printer in the center's Swamp Works that can be used for construction projects on the Moon and Mars, and even for troops in remote locations here on Earth. Zero launch mass refers to the fact that the printer uses pellets made from simulated lunar regolith, or dirt, and polymers to prove that space explorers can use resources at their destination instead of taking everything with them, saving them launch mass and money. Gelino and his team are working with Marshall Space Flight Center in Huntsville, Alabama, and the U.S. Army Corps of Engineers to develop a system that can 3-D print barracks in remote locations on Earth, using the resources they have where they are.

Development of softcopy environment for primary color banding visibility assessment

NASA Astrophysics Data System (ADS)

Min, Byungseok; Pizlo, Zygmunt; Allebach, Jan P.

2008-01-01

Fine-pitch banding is one of the most unwanted artifacts in laser electrophotographic (EP) printers. It is perceived as a quasiperiodic fluctuation in the process direction. Therefore, it is essential for printer vendors to know how banding is perceived by humans in order to improve print quality. Monochrome banding has been analyzed and assessed by many researchers; but there is no literature that deals with the banding of color laser printers as measured from actual prints. The study of color banding is complicated by the fact that the color banding signal is physically defined in a three-dimensional color space, while banding perception is described in a one-dimensional sense such as more banding or less banding. In addition, the color banding signal arises from the independent contributions of the four primary colorant banding signals. It is not known how these four distinct signals combine to give rise to the perception of color banding. In this paper, we develop a methodology to assess the banding visibility of the primary colorant cyan based on human visual perception. This is our first step toward studying the more general problem of color banding in combinations of two or more colorants. According to our method, we print and scan the cyan test patch, and extract the banding profile as a one dimensional signal so that we can freely adjust the intensity of banding. Thereafter, by exploiting the pulse width modulation capability of the laser printer, the extracted banding profile is used to modulate a pattern consisting of periodic lines oriented in the process direction, to generate extrinsic banding. This avoids the effect of the halftoning algorithm on the banding. Furthermore, to conduct various banding assessments more efficiently, we also develop a softcopy environment that emulates a hardcopy image on a calibrated monitor, which requires highly accurate device calibration throughout the whole system. To achieve the same color appearance as the hardcopy, we perform haploscopic matching experiments that allow each eye to independently adapt to different viewing conditions; and we find an appearance mapping function in the adapted XYZ space. Finally, to validate the accuracy of the softcopy environment, we conduct a banding matching experiment at three different banding levels by the memory matching method, and confirm that our softcopy environment produces the same banding perception as the hardcopy. In addition, we perform two more separate psychophysical experiments to measure the differential threshold of the intrinsic banding in both the hardcopy and softcopy environments, and confirm that the two thresholds are statistically identical. The results show that with our target printer, human subjects can see a just noticeable difference with a 9% reduction in the banding magnitude for the cyan colorant.

Nasal Physiology

MedlinePlus

... Anatomy Virtual Anatomy Disclosure Statement Printer Friendly Nasal Physiology Jeremiah A. Alt, MD, PhD Noam Cohen, MD, ... control the inflammation. CONCLUSION An understanding of the physiology of the nose is critical to understand nasal ...

13 CFR 134.614 - What deadlines apply to my application for an award and where do I send it?

Code of Federal Regulations, 2010 CFR

2010-01-01

... application for an award and where do I send it? 134.614 Section 134.614 Business Credit and Assistance SMALL... and where do I send it? After you have prevailed in an administrative proceeding or in a discrete... award for fees and expenses may still be filed, but it will not be considered by the ALJ until a final...

Sending Nudes: Sex, Self-Rated Mate Value, and Trait Machiavellianism Predict Sending Unsolicited Explicit Images

PubMed Central

March, Evita; Wagstaff, Danielle L.

2017-01-01

Modern dating platforms have given rise to new dating and sexual behaviors. In the current study, we examine predictors of sending unsolicited explicit images, a particularly underexplored online sexual behavior. The aim of the current study was to explore the utility of dark personality traits (i.e., narcissism, Machiavellianism, psychopathy, and sadism) and self-rated mate value in predicting attitudes toward and behavior of sending unsolicited explicit images. Two hundred and forty participants (72% female; Mage = 25.96, SD = 9.79) completed an online questionnaire which included a measure of self-rated mate value, a measure of dark personality traits, and questions regarding sending unsolicited explicit images (operationalized as the explicit image scale). Men, compared to women, were found to have higher explicit image scale scores, and both self-rated mate value and trait Machiavellianism were positive predictors of explicit image scale scores. Interestingly, there were no significant interactions between sex and these variables. Further, Machiavellianism mediated all relationships between other dark traits and explicit image scale scores, indicating this behavior is best explained by the personality trait associated with behavioral strategies. In sum, these results provide support for the premise that sending unsolicited explicit images may be a tactic of a short-term mating strategy; however, future research should further explore this claim. PMID:29326632

Preliminary geologic map of the Big Bear City 7.5' Quadrangle, San Bernardino County, California

USGS Publications Warehouse

Miller, Fred K.; Cossette, Digital preparation by Pamela M.

2004-01-01

This data set maps and describes the geology of the Big Bear City 7.5' quadrangle, San Bernardino County, California. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of the following items: (1) a rock-unit coverage and attribute tables (polygon and arc) containing geologic contacts, units and rock-unit labels as annotation which are also included in a separate annotation coverage, bbc_anno (2) a point coverage containing structural point data and (3) a coverage containing fold axes. In addition, the data set includes the following graphic and text products: (1) A PostScript graphic plot-file containing the geologic map, topography, cultural data, a Correlation of Map Units (CMU) diagram, a Description of Map Units (DMU), an index map, a regional geologic and structure map, and an explanation for point and line symbols; (2) PDF files of the Readme (including the metadata file as an appendix), and a screen graphic of the plot produced by the PostScript plot file. The geologic map describes a geologically complex area on the north side of the San Bernardino Mountains. Bedrock units in the Big Bear City quadrangle are dominated by (1) large Cretaceous granitic bodies ranging in composition from monzogranite to gabbro, (2) metamorphosed sedimentary rocks ranging in age from late Paleozoic to late Proterozoic, and (3) Middle Proterozoic gneiss. These rocks are complexly deformed by normal, reverse, and thrust faults, and in places are tightly folded. The geologic map database contains original U.S. Geological Survey data generated by detailed field observation and by interpretation of aerial photographs. The map data was compiled on base-stable cronoflex copies of the Big Bear City 7.5' topographic map, transferred to a scribe-guide and subsequently digitized. Lines, points, and polygons were edited at the USGS using standard ARC/INFO commands. Digitizing and editing artifacts significant enough to display at a scale of 1:24,000 were corrected. Within the database, geologic contacts are represented as lines (arcs), geologic units as polygons, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum.

Sinus Tumors

MedlinePlus

... Tumors Nasal Deformities Choanal Atresia Epiphora (Excessive Tearing) Disclosure Statement Printer Friendly Sinus Tumors Abtin Tabaee, MD Introduction Tumors of the nose and paranasal sinuses are rare, accounting for fewer than 1% of all tumors. These ...

Personal Computers.

ERIC Educational Resources Information Center

Toong, Hoo-min D.; Gupta, Amar

1982-01-01

Describes the hardware, software, applications, and current proliferation of personal computers (microcomputers). Includes discussions of microprocessors, memory, output (including printers), application programs, the microcomputer industry, and major microcomputer manufacturers (Apple, Radio Shack, Commodore, and IBM). (JN)

Guidelines for Better Communication with Brain Impaired Adults

MedlinePlus

... are here Home Guidelines for Better Communication with Brain-Impaired Adults Printer-friendly version Communicating with a loved one with a brain disorder can indeed be challenging. Finding the right ...

NASA Structural Analysis System (NASTRAN)

NASA Technical Reports Server (NTRS)

Purves, L.

1991-01-01

Program aids in structural design of wide range of objects, from high-impact printer parts to turbine engine blades, and fully validated. Since source code included, NASTRAN modified or enhanced for new applications.

Ink Jet For Business Graphic Application

NASA Astrophysics Data System (ADS)

Hooper, Dana H.

1987-04-01

This talk covers the use of Computer generated color output in the preparation of professional, memorable presentations. The focus is on this application and today's business graphic marketplace. To provide a background, on overview of the factors and trends influencing the market for color hard copy output is essential. The availability of lower cost computing technology, improved graphic software and user interfaces and the availability of color copiers is combining with the latest generation of color ink jet printers to cause a strong growth in the use of color hardcopy devices in the business graphics marketplace. The market is expected to grow at a compound annual growth rate in excess of 25% and reach a level of 5 Billion by 1990. Color lasography and ink jet technology based products are expected to increase share significantly primarily at the expense of pen plotters. Essential to the above mentioned growth is the latest generation of products. The Xerox 4020 Color Ink Jet Printer embodies the latest ink jet technology and is a good example of this new generation of products. The printer brings highly reliable color to a broad range of business users. The 4020 is driven by over 50 software packages allowing users compatibility and supporting a variety of applications. The 4020 is easy to operate and maintain and capable of producing excellent hardcopy and transparencies at an attractive price point. Several specific applications areas were discussed. Images were typically created on an IBM PC or compatible with a graphics application package and output to the Xerox 4020 Color Ink Jet Printer. Bar charts, line graphs, pie charts, integrated text and graphics, reports and maps were displayed with a brief description. Additionally, the use of color in brainscanning to discern and communicate information and in computer generated Art demonstrate the wide variety of potential applications. Images may be output to paper or to transparency for overhead presentation. The future of color in the business graphics market looks bright and will continue to be strongly influenced by future product introductions.

The unsuitability of html-based colour charts for estimating animal colours – a comment on Berggren and Merilä (2004)

PubMed Central

Stevens, Martin; Cuthill, Innes C

2005-01-01

Background A variety of techniques are used to study the colours of animal signals, including the use of visual matching to colour charts. This paper aims to highlight why they are generally an unsatisfactory tool for the measurement and classification of animal colours and why colour codes based on HTML (really RGB) standards, as advocated in a recent paper, are particularly inappropriate. There are many theoretical arguments against the use of colour charts, not least that human colour vision differs markedly from that of most other animals. However, the focus of this paper is the concern that, even when applied to humans, there is no simple 1:1 mapping from an RGB colour space to the perceived colours in a chart (the results are both printer- and illumination-dependent). We support our criticisms with data from colour matching experiments with humans, involving self-made, printed colour charts. Results Colour matching experiments with printed charts involving 11 subjects showed that the choices made by individuals were significantly different between charts that had exactly the same RGB values, but were produced from different printers. Furthermore, individual matches tended to vary under different lighting conditions. Spectrophotometry of the colour charts showed that the reflectance spectra of the charts varied greatly between printers and that equal steps in RGB space were often far from equal in terms of reflectance on the printed charts. Conclusion In addition to outlining theoretical criticisms of the use of colour charts, our empirical results show that: individuals vary in their perception of colours, that different printers produce strikingly different results when reproducing what should be the same chart, and that the characteristics of the light irradiating the surface do affect colour perception. Therefore, we urge great caution in the use of colour charts to study animal colour signals. They should be used only as a last resort and in full knowledge of their limitations, with specially produced charts made to high industry standards. PMID:16131394

Paperless or vanishing society

NASA Astrophysics Data System (ADS)

Turner Luke, Joy

2002-06-01

In the 1940s color photography became available and within a few years, extremely popular. As people switched from black and white photographs made with the old metallic silver process to the new color films, pictures taken to record their lives and families began a slow disappearing act. The various color processes, coupled with the substrates they were printed on, affected their longevity, but many color photographs taken from the late 1950s through the 1970s, and even into the 1980s, faded not only when exposed to the light, but also when stored in the dark. Henry Wilhelm's excellent book 'The Permanence and Care of Color Photographs' documents this history in detail. Today we are making another transition in the storage of pictures and information. There are questions about the longevity of different types of digital storage, and also of the images printed by various types of inkjet printers, or by laser printers using colored toners. Very expensive and very beautiful works of art produced on Iris printers are appearing in art exhibitions. Some of these are referred to as Giclee prints and are offered on excellent papers. Artists are told the prints will last a lifetime; and if by change they don't it is only necessary to make another print. Henry Wilhelm has begun to test and rate these images for lightfastness; however, his test method was developed for examining longevity in colored photographs. It is of interest to find out how these prints will hold up in the tests required for fine art materials. Thus far companies producing digital inks and printers have not invested the time and money necessary to develop an American Society for Testing and Materials (ASTM) standard method for evaluating the lightfastness of digital prints. However, it is possible to use ASTM D 5383, Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists, to pinpoint colors that will fade in a short time, even though the test is not as severe as ASTM D 4303, which is used to rate the lightfastness of artists's paint.

Straight talk: new approaches in healthcare. Are you ready to send HIPPA-compliant transactions? Your cash flow is at stake. Panel discussion.

PubMed

Barrett, Lee B; Hanks, Tom; Zubeldia, Kepa; Cramer, Richard

The deadlines are looming for compliance with the transaction and code set requirements set forth in the Health Insurance Portability and Accountability Act of 1996 (HIPAA). If your hospital filed for an extension in October 2002, you need to begin testing transactions by April 2003 and sending transactions by October 2003. But don't rely on your technology vendors to give you the ability to send compliant transactions. While vendors can provide the correct computer data format, they can't gather the correct information. If you can't send a compliant transaction, the Centers for Medicare and Medicaid Services could reject your claims, drying up a big percentage of your cash flow.

Method for triggering an action

DOEpatents

Hall, David R.; Bartholomew, David B.; Johnson, Monte L.; Moon, Justin; Koehler, Roger O.

2006-10-17

A method for triggering an action of at least one downhole device on a downhole network integrated into a downhole tool string synchronized to an event comprises determining latency, sending a latency adjusted signal, and performing the action. The latency is determined between a control device and the at least one downhole device. The latency adjusted signal for triggering an action is sent to the downhole device. The action is performed downhole synchronized to the event. A preferred method for determining latency comprises the steps: a control device sends a first signal to the downhole device; after receiving the signal, the downhole device sends a response signal to the control device; and the control device analyzes the time from sending the signal to receiving the response signal.

Silicon Micromachined Dimensional Calibration Artifact for M

ScienceCinema

Hy Tran

2017-12-09

Improves measurement accuracy for producing miniaturized devices such as fuel injectors, watch components, and inkjet printer parts as these high-volume parts are being manufactured. 2008 R&D 100 w...  

1401414

NASA Image and Video Library

2014-10-07

NIKI WERKHEISER - 3D PRINTING ZERO-G PROJECT MANAGER, DISCUSSES 3D PRINTING TECHNOLOGY WITH DR. ELLEN OCHOA.1401414 THE ISS NOW HAS A 3D PRINTER, WHICH THE TECHNOLOGY WAS TESTED AT THE MARSHALL SPACE FLIGHT CENTER

Poetry and Poster Production.

ERIC Educational Resources Information Center

Shein, Dina

1993-01-01

Describes a school library media project for teaching poetry in which fifth-grade students write and illustrate a poem and produce a poster using the PosterPrinter machine. Suggestions for additional activities are included. (EAM)

Adult Day Care

MedlinePlus

... Page Resize Text Printer Friendly Online Chat Adult Day Care Adult Day Care Centers are designed to provide care and ... adults who need assistance or supervision during the day. Programs offer relief to family members and caregivers, ...

Silicon Mircomachined Dimensional Calibration Artifact for M

ScienceCinema

Sandia

2017-12-09

Improves measurement accuracy for producing miniaturized devices such as fuel injectors, watch components, and inkjet printer parts as these high-volume parts are being manufactured. 2008 R&D 100 winner (SAND2008-2227P)

Reprint Characteristics of Non-Silver Films.

ERIC Educational Resources Information Center

Microform Review, 1990

1990-01-01

Describes reprint characteristics of diazo and vesicular films. Use with microform reader-printers and autogeneration of copies are discussed, and methods of dealing with the unusual reprint behavior of these films are outlined. (MES)

Rehand: Realistic electric prosthetic hand created with a 3D printer.

PubMed

Yoshikawa, Masahiro; Sato, Ryo; Higashihara, Takanori; Ogasawara, Tsukasa; Kawashima, Noritaka

2015-01-01

Myoelectric prosthetic hands provide an appearance with five fingers and a grasping function to forearm amputees. However, they have problems in weight, appearance, and cost. This paper reports on the Rehand, a realistic electric prosthetic hand created with a 3D printer. It provides a realistic appearance that is same as the cosmetic prosthetic hand and a grasping function. A simple link mechanism with one linear actuator for grasping and 3D printed parts achieve low cost, light weight, and ease of maintenance. An operating system based on a distance sensor provides a natural operability equivalent to the myoelectric control system. A supporter socket allows them to wear the prosthetic hand easily. An evaluation using the Southampton Hand Assessment Procedure (SHAP) demonstrated that an amputee was able to operate various objects and do everyday activities with the Rehand.

Cost-effective poster and print production with digital camera and computer technology.

PubMed

Chen, M Y; Ott, D J; Rohde, R P; Henson, E; Gelfand, D W; Boehme, J M

1997-10-01

The purpose of this report is to describe a cost-effective method for producing black-and-white prints and color posters within a radiology department. Using a high-resolution digital camera, personal computer, and color printer, the average cost of a 5 x 7 inch (12.5 x 17.5 cm) black-and-white print may be reduced from $8.50 to $1 each in our institution. The average cost for a color print (8.5 x 14 inch [21.3 x 35 cm]) varies from $2 to $3 per sheet depending on the selection of ribbons for a color-capable laser printer and the paper used. For a 30-panel, 4 x 8 foot (1.2 x 2.4 m) standard-sized poster, the cost for materials and construction is approximately $100.

Digital readout for image converter cameras

NASA Astrophysics Data System (ADS)

Honour, Joseph

1991-04-01

There is an increasing need for fast and reliable analysis of recorded sequences from image converter cameras so that experimental information can be readily evaluated without recourse to more time consuming photographic procedures. A digital readout system has been developed using a randomly triggerable high resolution CCD camera, the output of which is suitable for use with IBM AT compatible PC. Within half a second from receipt of trigger pulse, the frame reformatter displays the image and transfer to storage media can be readily achieved via the PC and dedicated software. Two software programmes offer different levels of image manipulation which includes enhancement routines and parameter calculations with accuracy down to pixel levels. Hard copy prints can be acquired using a specially adapted Polaroid printer, outputs for laser and video printer extend the overall versatility of the system.

[Tissue printing; the potential application of 3D printing in medicine].

PubMed

Visser, Jetze; Melchels, Ferry P W; Dhert, Wouter J A; Malda, Jos

2013-01-01

Complex structures based on a digital blueprint can be created using a 3D printer. As this blueprint can be created using patient imaging data, there are many potential patient-specific applications of 3D printing in medicine. Individually printed metal implants and synthetic devices are currently being used on a limited scale in clinical practice. Researchers in the field of regenerative medicine are now going a step further by printing a combination of cells, growth factors and biomaterials. This process is known as 'bioprinting'. It can be used to copy the complex organization of natural tissue required to repair or replace damaged tissues or organs. The technique needs to be optimized, however, and more knowledge is required regarding the development of printed living constructs into functional tissues before 'tissue from the printer' can be clinically applied.

3D Printing Variable Stiffness Foams Using Viscous Thread Instability

NASA Astrophysics Data System (ADS)

Lipton, Jeffrey I.; Lipson, Hod

2016-08-01

Additive manufacturing of cellular structures has numerous applications ranging from fabrication of biological scaffolds and medical implants, to mechanical weight reduction and control over mechanical properties. Various additive manufacturing processes have been used to produce open regular cellular structures limited only by the resolution of the printer. These efforts have focused on printing explicitly designed cells or explicitly planning offsets between strands. Here we describe a technique for producing cellular structures implicitly by inducing viscous thread instability when extruding material. This process allows us to produce complex cellular structures at a scale that is finer than the native resolution of the printer. We demonstrate tunable effective elastic modulus and density that span two orders of magnitude. Fine grained cellular structures allow for fabrication of foams for use in a wide range of fields ranging from bioengineering, to robotics to food printing.

Digital Materials - Evaluation of the Possibilities of using Selected Hyperelastic Models to Describe Constitutive Relations

NASA Astrophysics Data System (ADS)

Mańkowski, J.; Lipnicki, J.

2017-08-01

The authors tried to identify the parameters of numerical models of digital materials, which are a kind of composite resulting from the manufacture of the product in 3D printers. With the arrangement of several heads of the printer, the new material can result from mixing of materials with radically different properties, during the process of producing single layer of the product. The new material has properties dependent on the base materials properties and their proportions. Digital materials tensile characteristics are often non-linear and qualify to be described by hyperelastic materials models. The identification was conducted based on the results of tensile tests models, its various degrees coefficients of the polynomials to various degrees coefficients of the polynomials. The Drucker's stability criterion was also examined. Fourteen different materials were analyzed.

Dimensional accuracy of 3D printed vertebra

NASA Astrophysics Data System (ADS)

Ogden, Kent; Ordway, Nathaniel; Diallo, Dalanda; Tillapaugh-Fay, Gwen; Aslan, Can

2014-03-01

3D printer applications in the biomedical sciences and medical imaging are expanding and will have an increasing impact on the practice of medicine. Orthopedic and reconstructive surgery has been an obvious area for development of 3D printer applications as the segmentation of bony anatomy to generate printable models is relatively straightforward. There are important issues that should be addressed when using 3D printed models for applications that may affect patient care; in particular the dimensional accuracy of the printed parts needs to be high to avoid poor decisions being made prior to surgery or therapeutic procedures. In this work, the dimensional accuracy of 3D printed vertebral bodies derived from CT data for a cadaver spine is compared with direct measurements on the ex-vivo vertebra and with measurements made on the 3D rendered vertebra using commercial 3D image processing software. The vertebra was printed on a consumer grade 3D printer using an additive print process using PLA (polylactic acid) filament. Measurements were made for 15 different anatomic features of the vertebral body, including vertebral body height, endplate width and depth, pedicle height and width, and spinal canal width and depth, among others. It is shown that for the segmentation and printing process used, the results of measurements made on the 3D printed vertebral body are substantially the same as those produced by direct measurement on the vertebra and measurements made on the 3D rendered vertebra.

3D print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer

NASA Astrophysics Data System (ADS)

Huber, C.; Abert, C.; Bruckner, F.; Groenefeld, M.; Muthsam, O.; Schuschnigg, S.; Sirak, K.; Thanhoffer, R.; Teliban, I.; Vogler, C.; Windl, R.; Suess, D.

2016-10-01

3D print is a recently developed technique, for single-unit production, and for structures that have been impossible to build previously. The current work presents a method to 3D print polymer bonded isotropic hard magnets with a low-cost, end-user 3D printer. Commercially available isotropic NdFeB powder inside a PA11 matrix is characterized, and prepared for the printing process. An example of a printed magnet with a complex shape that was designed to generate a specific stray field is presented, and compared with finite element simulation solving the macroscopic Maxwell equations. For magnetic characterization, and comparing 3D printed structures with injection molded parts, hysteresis measurements are performed. To measure the stray field outside the magnet, the printer is upgraded to a 3D magnetic flux density measurement system. To skip an elaborate adjusting of the sensor, a simulation is used to calibrate the angles, sensitivity, and the offset of the sensor. With this setup, a measurement resolution of 0.05 mm along the z-axes is achievable. The effectiveness of our calibration method is shown. With our setup, we are able to print polymer bonded magnetic systems with the freedom of having a specific complex shape with locally tailored magnetic properties. The 3D scanning setup is easy to mount, and with our calibration method we are able to get accurate measuring results of the stray field.

Customized "In-Office" Three-Dimensional Printing for Virtual Surgical Planning in Craniofacial Surgery.

PubMed

Mendez, Bernardino M; Chiodo, Michael V; Patel, Parit A

2015-07-01

Virtual surgical planning using three-dimensional (3D) printing technology has improved surgical efficiency and precision. A limitation to this technology is that production of 3D surgical models requires a third-party source, leading to increased costs (up to $4000) and prolonged assembly times (averaging 2-3 weeks). The purpose of this study is to evaluate the feasibility, cost, and production time of customized skull models created by an "in-office" 3D printer for craniofacial reconstruction. Two patients underwent craniofacial reconstruction with the assistance of "in-office" 3D printing technology. Three-dimensional skull models were created from a bioplastic filament with a 3D printer using computed tomography (CT) image data. The cost and production time for each model were measured. For both patients, a customized 3D surgical model was used preoperatively to plan split calvarial bone grafting and intraoperatively to more efficiently and precisely perform the craniofacial reconstruction. The average cost for surgical model production with the "in-office" 3D printer was $25 (cost of bioplastic materials used to create surgical model) and the average production time was 14  hours. Virtual surgical planning using "in office" 3D printing is feasible and allows for a more cost-effective and less time consuming method for creating surgical models and guides. By bringing 3D printing to the office setting, we hope to improve intraoperative efficiency, surgical precision, and overall cost for various types of craniofacial and reconstructive surgery.

Total body irradiation with a compensator fabricated using a 3D optical scanner and a 3D printer

NASA Astrophysics Data System (ADS)

Park, So-Yeon; Kim, Jung-in; Joo, Yoon Ha; Lee, Jung Chan; Park, Jong Min

2017-05-01

We propose bilateral total body irradiation (TBI) utilizing a 3D printer and a 3D optical scanner. We acquired surface information of an anthropomorphic phantom with the 3D scanner and fabricated the 3D compensator with the 3D printer, which could continuously compensate for the lateral missing tissue of an entire body from the beam’s eye view. To test the system’s performance, we measured doses with optically stimulated luminescent dosimeters (OSLDs) as well as EBT3 films with the anthropomorphic phantom during TBI without a compensator, conventional bilateral TBI, and TBI with the 3D compensator (3D TBI). The 3D TBI showed the most uniform dose delivery to the phantom. From the OSLD measurements of the 3D TBI, the deviations between the measured doses and the prescription dose ranged from  -6.7% to 2.4% inside the phantom and from  -2.3% to 0.6% on the phantom’s surface. From the EBT3 film measurements, the prescription dose could be delivered to the entire body of the phantom within  ±10% accuracy, except for the chest region, where tissue heterogeneity is extreme. The 3D TBI doses were much more uniform than those of the other irradiation techniques, especially in the anterior-to-posterior direction. The 3D TBI was advantageous, owing to its uniform dose delivery as well as its efficient treatment procedure.

Low-cost Method for Obtaining Medical Rapid Prototyping Using Desktop 3D printing: A Novel Technique for Mandibular Reconstruction Planning

PubMed Central

Vahdani, Soheil; Ramos, Hector

2017-01-01

Background Three-dimensional (3D) printing is relatively a new technology with clinical applications, which enable us to create rapid accurate prototype of the selected anatomic region, making it possible to plan complex surgery and pre-bend hardware for individual surgical cases. This study aimed to express our experience with the use of medical rapid prototype (MRP) of the maxillofacial region created by desktop 3D printer and its application in maxillofacial reconstructive surgeries. Material and Methods Three patients with benign mandible tumors were included in this study after obtaining informed consent. All patient’s maxillofacial CT scan data was processed by segmentation and isolation software and mandible MRP was printed using our desktop 3D printer. These models were used for preoperative surgical planning and prebending of the reconstruction plate. Conclusions MRP created by desktop 3D printer is a cost-efficient, quick and easily produced appliance for the planning of reconstructive surgery. It can contribute in patient orientation and helping them in a better understanding of their condition and proposed surgical treatment. It helps surgeons for pre-operative planning in the resection or reconstruction cases and represent an excellent tool in academic setting for residents training. The pre-bended reconstruction plate based on MRP, resulted in decreased surgery time, cost and anesthesia risks on the patients. Key words:3D printing, medical modeling, rapid prototype, mandibular reconstruction, ameloblastoma. PMID:29075412

A fast flexible ink-jet printing method for patterning dissociated neurons in culture.

PubMed

Sanjana, Neville E; Fuller, Sawyer B

2004-07-30

We present a new technique that uses a custom-built ink-jet printer to fabricate precise micropatterns of cell adhesion materials for neural cell culture. Other work in neural cell patterning has employed photolithography or "soft lithographic" techniques such as micro-stamping, but such approaches are limited by their use of an un-alterable master pattern such as a mask or stamp master and can be resource-intensive. In contrast, ink-jet printing, used in low-cost desktop printers, patterns material by depositing microscopic droplets under robotic control in a programmable and inexpensive manner. We report the use of ink-jet printing to fabricate neuron-adhesive patterns such as islands and other shapes using poly(ethylene) glycol as the cell-repulsive material and a collagen/poly-D-lysine (PDL) mixture as the cell-adhesive material. We show that dissociated rat hippocampal neurons and glia grown at low densities on such patterns retain strong pattern adherence for over 25 days. The patterned neurons are comparable to control, un-patterned cells in electrophysiological properties and in immunocytochemical measurements of synaptic density and inhibitory cell distributions. We suggest that an inexpensive desktop printer may be an accessible tool for making micro-island cultures and other basic patterns. We also suggest that ink-jet printing may be extended to a range of developmental neuroscience studies, given its ability to more easily layer materials, build substrate-bound gradients, construct out-of-plane structure, and deposit sources of diffusible factors. Copyright 2004 Elsevier B.V.

3D Printed Models of Cleft Palate Pathology for Surgical Education.

PubMed

Lioufas, Peter A; Quayle, Michelle R; Leong, James C; McMenamin, Paul G

2016-09-01

To explore the potential viability and limitations of 3D printed models of children with cleft palate deformity. The advantages of 3D printed replicas of normal anatomical specimens have previously been described. The creation of 3D prints displaying patient-specific anatomical pathology for surgical planning and interventions is an emerging field. Here we explored the possibility of taking rare pediatric radiographic data sets to create 3D prints for surgical education. Magnetic resonance imaging data of 2 children (8 and 14 months) were segmented, colored, and anonymized, and stereolothographic files were prepared for 3D printing on either multicolor plastic or powder 3D printers and multimaterial 3D printers. Two models were deemed of sufficient quality and anatomical accuracy to print unamended. One data set was further manipulated digitally to artificially extend the length of the cleft. Thus, 3 models were printed: 1 incomplete soft-palate deformity, 1 incomplete anterior palate deformity, and 1 complete cleft palate. All had cleft lip deformity. The single-material 3D prints are of sufficient quality to accurately identify the nature and extent of the deformities. Multimaterial prints were subsequently created, which could be valuable in surgical training. Improvements in the quality and resolution of radiographic imaging combined with the advent of multicolor multiproperty printer technology will make it feasible in the near future to print 3D replicas in materials that mimic the mechanical properties and color of live human tissue making them potentially suitable for surgical training.

Filament Advance Detection Sensor for Fused Deposition Modelling 3D Printers

PubMed Central

Islán Marcos, Manuel

2018-01-01

The main purpose of this paper is to present a system to detect extrusion failures in fused deposition modelling (FDM) 3D printers by sensing that the filament is moving forward properly. After several years using these kind of machines, authors detected that there is not any system to detect the main problem in FDM machines. Authors thought in different sensors and used the weighted objectives method, one of the most common evaluation methods, for comparing design concepts based on an overall value per design concept. Taking into account the obtained scores of each specification, the best choice for this work is the optical encoder. Once the sensor is chosen, it is necessary to design de part where it will be installed without interfering with the normal function of the machine. To do it, photogrammetry scanning methodology was employed. The developed device perfectly detects the advance of the filament without affecting the normal operation of the machine. Also, it is achieved the primary objective of the system, avoiding loss of material, energy, and mechanical wear, keeping the premise of making a low-cost product that does not significantly increase the cost of the machine. This development has made it possible to use the printer with remains of coil filaments, which were not spent because they were not sufficient to complete an impression. Also, printing models in two colours with only one extruder has been enabled by this development. PMID:29747458

Filament Advance Detection Sensor for Fused Deposition Modelling 3D Printers.

PubMed

Soriano Heras, Enrique; Blaya Haro, Fernando; de Agustín Del Burgo, José M; Islán Marcos, Manuel; D'Amato, Roberto

2018-05-09

The main purpose of this paper is to present a system to detect extrusion failures in fused deposition modelling (FDM) 3D printers by sensing that the filament is moving forward properly. After several years using these kind of machines, authors detected that there is not any system to detect the main problem in FDM machines. Authors thought in different sensors and used the weighted objectives method, one of the most common evaluation methods, for comparing design concepts based on an overall value per design concept. Taking into account the obtained scores of each specification, the best choice for this work is the optical encoder. Once the sensor is chosen, it is necessary to design de part where it will be installed without interfering with the normal function of the machine. To do it, photogrammetry scanning methodology was employed. The developed device perfectly detects the advance of the filament without affecting the normal operation of the machine. Also, it is achieved the primary objective of the system, avoiding loss of material, energy, and mechanical wear, keeping the premise of making a low-cost product that does not significantly increase the cost of the machine. This development has made it possible to use the printer with remains of coil filaments, which were not spent because they were not sufficient to complete an impression. Also, printing models in two colours with only one extruder has been enabled by this development.

Voxel-based Immersive Environments Immersive Environments

DTIC Science & Technology

2000-05-31

3D accelerated hardware. While this method lends itself well to modem hardware, the quality of the resulting images was low due to the coarse sampling...pipes. We will use MPEG video compression when sending video over T1 line, whereas for 56K bit Internet connection, we can use one of the more...sent over the communication line. The ultimate goal is to send the immersive environment over the 56K bps Internet. Since we need to send audio and

Physical Causation. Phil Dowe, Physical causation (Cambridge Studies in Probability, Induction, and Decision Theory), Cambridge University Press, Cambridge, 2000, pp. ix+224, price US60.00, ISBN: 0-521-78049-7 hbk

NASA Astrophysics Data System (ADS)

Hausman, Daniel M.

Causation is a frustrating subject. Suppose one begins with some promising idea such as that causation is counterfactual dependence or statistical relevance. One then develops this idea with care and intelligence, revises and improves it to cope with criticisms, and by the time one is finished, sane people will be looking elsewhere. If one wants conclusive reasons to reject the counterfactual theory of causation, one can do no better than to read Lewis' (1986) many postscripts. If one wants the best refutation of a probabilistic theory of causation, then one should read my colleague, Ellery Eells' (1991) magisterial defense. In Physical Causation, Phil Dowe performs the same service for physical process/interaction theories of causation.

Cochlear implant

MedlinePlus

... stimulator, which accepts, decodes, and then sends an electrical signal to the brain. The second part of ... receives the sound, converts the sound into an electrical signal, and sends it to the inside part ...

Synthesis of Tree-Structured Computing Systems through Use of Closures.

DTIC Science & Technology

1984-11-29

best hope of 8 achieving subpolynomial running times for typical problems without a degree of inter - connection that makes physical implementation... Inter HAS v TALKS leftson (SENDS v) TALKS rightson (SENDS v) HEARS parent (USES v.parent) HEARS U.inter (USES u-value) leaf HAS li HEARS parent (USES...v.parent) U Istype TREE (i),iE[i ... n-1] SIZE n root HAS u TALKS T.root (SENDS u) HEARS leftaon(USES v.left) HEARS rightson(USES v.rght) Inter HAS u

Gas pipe explorer robot

NASA Technical Reports Server (NTRS)

Wilcox, Brian (Inventor)

2004-01-01

A gas pipe explorer formed of a plurality of connecting elements, and an articulation element between the connected elements. The connected elements include drive capabilities, and the articulation element allows the connected elements to traverse gas pipes of arbitrary shapes and sizes. A sensor may sends the characteristics of the gas pipe, and the communication element may send back those sends characteristics. The communication can be wired, over a tether connecting the device to a remote end. Alternatively, the connection can be wireless, driven by either a generator or a battery.

U.S. Department of Energy, Sandia National Laboratories: Printing Case Study

EPA Pesticide Factsheets

The U.S. Department of Energy, Sandia National Laboratories (SNL), New Mexico quantified the costs associated with individual desktop printing devices, for comparison with costs associated with using networked copiers as printers

Modems and More: The Computer Branches Out.

ERIC Educational Resources Information Center

Dyrli, Odvard Egil

1986-01-01

Surveys new "peripherals," electronic devices that attach to computers. Devices such as videodisc players, desktop laser printers, large screen projectors, and input mechanisms that circumvent the keyboard dramatically expand the computer's instructional uses. (Author/LHW)

How to be a good visitor during flu season

MedlinePlus

... consumers How to be a good visitor during flu season 11/20/2017 Access a printer-friendly ... of infection prevention. This is especially true during flu season. According to the CDC, influenza (the flu) ...

Presidential Green Chemistry Challenge: 2008 Greener Synthetic Pathways Award

EPA Pesticide Factsheets

Presidential Green Chemistry Challenge 2008 award winner, Battelle, developed a biobased soy toner for laser printers and copiers. The technology saves energy and improves de-inking, allowing more paper fiber to be recycled.

Ink-Jet Printer Forms Solar-Cell Contacts

NASA Technical Reports Server (NTRS)

Alexander, Paul, Jr.; Vest, R. W.; Binford, Don A.; Tweedell, Eric P.

1988-01-01

Contacts formed in controllable patterns with metal-based inks. System forms upper metal contact patterns on silicon photovoltaic cells. Uses metallo-organic ink, decomposes when heated, leaving behind metallic, electrically conductive residue in printed area.

24 CFR 1715.30 - Persons to whom subpart B is inapplicable.

Code of Federal Regulations, 2010 CFR

2010-04-01

... inapplicable. Newspaper or periodical publishers, job printers, broadcasters, or telecasters, or any of the... subdivision advertised or (c) Also serve directly or indirectly as the advertising agent or agency for the...

A simulation model for wind energy storage systems. Volume 3: Program descriptions

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

1977-01-01

Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

Bladder function - neurological control

MedlinePlus Videos and Cool Tools

... with urine, sensory nerves send impulses to the brain indicating that the bladder is full. The sensory ... cord to relay this information. In turn, the brain sends impulses back to the bladder instructing the ...

Multiple node remote messaging

DOEpatents

Blumrich, Matthias A.; Chen, Dong; Gara, Alan G.; Giampapa, Mark E.; Heidelberger, Philip; Ohmacht, Martin; Salapura, Valentina; Steinmacher-Burow, Burkhard; Vranas, Pavlos

2010-08-31

A method for passing remote messages in a parallel computer system formed as a network of interconnected compute nodes includes that a first compute node (A) sends a single remote message to a remote second compute node (B) in order to control the remote second compute node (B) to send at least one remote message. The method includes various steps including controlling a DMA engine at first compute node (A) to prepare the single remote message to include a first message descriptor and at least one remote message descriptor for controlling the remote second compute node (B) to send at least one remote message, including putting the first message descriptor into an injection FIFO at the first compute node (A) and sending the single remote message and the at least one remote message descriptor to the second compute node (B).

78 FR 58305 - Honeywell International, Inc.; Analysis of Agreement Containing Consent Order To Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

..., formulas, patterns, devices, manufacturing processes, or customer names. If you want the Commission to give... barcode scanners, barcode printers, RFID systems and voice recognition systems. III. Scan Engines The...

Treating Osteoarthritis of the Knee Popular: Supplements Don't Work

MedlinePlus

... Strollers Cars New & Used Cars Research Car Buying & Pricing Maintenance & Repair Tires Electronics Cameras Laptops Printers TVs ... SUVs More Ready to Shop All Car Buying & Pricing Advice Best New Car Deals Build & Buy Car ...

49 CFR 10.75 - Fee schedule.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., each standard size sheet (4″×6″ containing up to 65 frames) .15 (3) Apertune card to hard copy, each copy .50 (4) 16mm microfilm to hard copy: First .25 Additional .07 (g) Computerline printer output...

49 CFR 10.75 - Fee schedule.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., each standard size sheet (4″×6″ containing up to 65 frames) .15 (3) Apertune card to hard copy, each copy .50 (4) 16mm microfilm to hard copy: First .25 Additional .07 (g) Computerline printer output...