Advanced development of a programmable power processor

NASA Technical Reports Server (NTRS)

Lukens, F. E.; Lanier, J. R., Jr.; Kapustka, R. E.; Graves, J.

1980-01-01

The need for the development of a multipurpose flexible programmable power processor (PPP) has increased significantly in recent years to reduce ever rising development costs. One of the program requirements the PPP specification will cover is the 25 kW power module power conversion needs. The 25 kW power module could support the Space Shuttle program during the 1980s and 1990s and could be the stepping stone to future large space programs. Trades that led to selection of a microprocessor controlled power processor are briefly discussed. Emphasis is given to the power processing equipment that uses a microprocessor to provide versatility that allows multiple use and to provide for future growth by reprogramming output voltage to a higher level (to 120 V from 30 V). Component selection and design considerations are also discussed.

The photovoltaic pilot projects of the European Community

NASA Astrophysics Data System (ADS)

Schnell, W.

The Commission of the European Communities has started in 1980 a programme for the design and construction of a series of photovoltaic pilot projects in the range of 30-300 kWp. Virtually all important industries and other development organisations in Europe working on photovoltaic cells and systems are involved in this programme. The different technologies which are being developed concern the modules, the cabling of the array, structure design, storage strategy and power conditioning. The various applications include powering of an island, villages, recreation centres, water desalination and disinfection, powering of radio transmitters, emergency power plants, dairy farm, training school, cooling, water pumping, powering of a solar heated swimming pool and last but not least, hydrogen production.

Beyond ITER: neutral beams for a demonstration fusion reactor (DEMO) (invited).

PubMed

McAdams, R

2014-02-01

In the development of magnetically confined fusion as an economically sustainable power source, International Tokamak Experimental Reactor (ITER) is currently under construction. Beyond ITER is the demonstration fusion reactor (DEMO) programme in which the physics and engineering aspects of a future fusion power plant will be demonstrated. DEMO will produce net electrical power. The DEMO programme will be outlined and the role of neutral beams for heating and current drive will be described. In particular, the importance of the efficiency of neutral beam systems in terms of injected neutral beam power compared to wallplug power will be discussed. Options for improving this efficiency including advanced neutralisers and energy recovery are discussed.

Programmable neural processing on a smartdust for brain-computer interfaces.

PubMed

Yuwen Sun; Shimeng Huang; Oresko, Joseph J; Cheng, Allen C

2010-10-01

Brain-computer interfaces (BCIs) offer tremendous promise for improving the quality of life for disabled individuals. BCIs use spike sorting to identify the source of each neural firing. To date, spike sorting has been performed by either using off-chip analysis, which requires a wired connection penetrating the skull to a bulky external power/processing unit, or via custom application-specific integrated circuits that lack the programmability to perform different algorithms and upgrades. In this research, we propose and test the feasibility of performing on-chip, real-time spike sorting on a programmable smartdust, including feature extraction, classification, compression, and wireless transmission. A detailed power/performance tradeoff analysis using DVFS is presented. Our experimental results show that the execution time and power density meet the requirements to perform real-time spike sorting and wireless transmission on a single neural channel.

78 FR 23542 - Procurement List; Proposed Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

..., Programmable Flicker Pattern, Red LED, 8in Diameter, AA Battery Operated. NSN: 6230-00-NIB-0034--Kit, Safety Flare, Programmable Flicker Pattern, Red LED, 8in Diameter, Rechargeable Power Unit. Coverage: B-List...

76 FR 49782 - Notice of Issuance of Final Determination Concerning Certain Digital Projectors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-11

... from an electronically erasable programmable read only memory (EEPROM). The firmware detects the power..., Harmonized Tariff Schedule of the United States), the programming of a foreign PROM (Programmable Read-Only...

A Low-Cost CMOS Programmable Temperature Switch

PubMed Central

Li, Yunlong; Wu, Nanjian

2008-01-01

A novel uncalibrated CMOS programmable temperature switch with high temperature accuracy is presented. Its threshold temperature Tth can be programmed by adjusting the ratios of width and length of the transistors. The operating principles of the temperature switch circuit is theoretically explained. A floating gate neural MOS circuit is designed to compensate automatically the threshold temperature Tth variation that results form the process tolerance. The switch circuit is implemented in a standard 0.35 μm CMOS process. The temperature switch can be programmed to perform the switch operation at 16 different threshold temperature Tths from 45—120°C with a 5°C increment. The measurement shows a good consistency in the threshold temperatures. The chip core area is 0.04 mm2 and power consumption is 3.1 μA at 3.3V power supply. The advantages of the temperature switch are low power consumption, the programmable threshold temperature and the controllable hysteresis. PMID:27879871

A Reflection on the Broader, Systemic Impacts of Youth Volunteer Abroad Programmes: A Canadian Perspective

ERIC Educational Resources Information Center

Pluim, Gary W. J.; Jorgenson, Shelane R.

2012-01-01

Despite the increasing popularity and appeal of youth volunteer abroad (YVA) programmes, powerful critiques are emerging. While these programmes tend to promise much in the way of global ethics and global citizenship in youth participants, they often neglect to seriously interrogate the one-way movement of people from the centre to the periphery…

Krachtvoer: Process Evaluation of a Dutch Programme for Lower Vocational Schools to Promote Healthful Diet

ERIC Educational Resources Information Center

Martens, Marloes; van Assema, Patricia; Paulussen, Theo; Schaalma, Herman; Brug, Johannes

2006-01-01

The aim of this study was to examine the fidelity and completeness of the implementation of a school-based healthful diet promotion programme called "Krachtvoer" (we use the Dutch title of the programme throughout this article. A possible translation is Power Food, but this does not reflect the play on words in the Dutch title), aimed at…

Dynamically reconfigurable photovoltaic system

DOEpatents

Okandan, Murat; Nielson, Gregory N.

2016-05-31

A PV system composed of sub-arrays, each having a group of PV cells that are electrically connected to each other. A power management circuit for each sub-array has a communications interface and serves to connect or disconnect the sub-array to a programmable power grid. The power grid has bus rows and bus columns. A bus management circuit is positioned at a respective junction of a bus column and a bus row and is programmable through its communication interface to connect or disconnect a power path in the grid. As a result, selected sub-arrays are connected by selected power paths to be in parallel so as to produce a low system voltage, and, alternately in series so as to produce a high system voltage that is greater than the low voltage by at least a factor of ten.

Dynamically reconfigurable photovoltaic system

DOEpatents

Okandan, Murat; Nielson, Gregory N.

2016-12-27

A PV system composed of sub-arrays, each having a group of PV cells that are electrically connected to each other. A power management circuit for each sub-array has a communications interface and serves to connect or disconnect the sub-array to a programmable power grid. The power grid has bus rows and bus columns. A bus management circuit is positioned at a respective junction of a bus column and a bus row and is programmable through its communication interface to connect or disconnect a power path in the grid. As a result, selected sub-arrays are connected by selected power paths to be in parallel so as to produce a low system voltage, and, alternately in series so as to produce a high system voltage that is greater than the low voltage by at least a factor of ten.

A Low-Power High-Speed Smart Sensor Design for Space Exploration Missions

NASA Technical Reports Server (NTRS)

Fang, Wai-Chi

1997-01-01

A low-power high-speed smart sensor system based on a large format active pixel sensor (APS) integrated with a programmable neural processor for space exploration missions is presented. The concept of building an advanced smart sensing system is demonstrated by a system-level microchip design that is composed with an APS sensor, a programmable neural processor, and an embedded microprocessor in a SOI CMOS technology. This ultra-fast smart sensor system-on-a-chip design mimics what is inherent in biological vision systems. Moreover, it is programmable and capable of performing ultra-fast machine vision processing in all levels such as image acquisition, image fusion, image analysis, scene interpretation, and control functions. The system provides about one tera-operation-per-second computing power which is a two order-of-magnitude increase over that of state-of-the-art microcomputers. Its high performance is due to massively parallel computing structures, high data throughput rates, fast learning capabilities, and advanced VLSI system-on-a-chip implementation.

Design of resolution/power controllable Asynchronous Sigma-Delta Modulator

NASA Astrophysics Data System (ADS)

Deshmukh, Anita Arvind; Deshmukh, Raghvendra B.

2016-12-01

This paper presents the design of a Programmable Asynchronous Modulator (PAM) with field control of resolution and power. A novel variable hysteresis Schmitt Trigger (ST) is used for external programmability. Asynchronous Sigma-Delta Modulator (ASDM) implementation with external control voltages is proposed to supervise the resolution and power. This architecture with reduced circuit complexity considerably improves the earlier realizations by eliminating multiple current sources as well switched capacitor circuits and results in power saving up to 87 %. Proposed PAM design demonstrates an improved SNDR of 115 dB, DR of 96 dB, and power consumption below 280 μW. It illustrates Effective Number of Bits (ENOB) to 18.81 and Figure of Merit (FoM) to 0.15 fJ/conversion step. Modulator is implemented in Cadence UMC Hspice 0.18 μm CMOS analog technology. Off-chip PAM control for resolution/power performance has potential applications in battery operated ultra low power applications like IoT; where ADC is one of the major power consuming components. It offers the promise for an efficient performance with power saving.

A low power flash-FPGA based brain implant micro-system of PID control.

PubMed

Lijuan Xia; Fattah, Nabeel; Soltan, Ahmed; Jackson, Andrew; Chester, Graeme; Degenaar, Patrick

2017-07-01

In this paper, we demonstrate that a low power flash FPGA based micro-system can provide a low power programmable interface for closed-loop brain implant inter- faces. The proposed micro-system receives recording local field potential (LFP) signals from an implanted probe, performs closed-loop control using a first order control system, then converts the signal into an optogenetic control stimulus pattern. Stimulus can be implemented through optoelectronic probes. The long term target is for both fundamental neuroscience applications and for clinical use in treating epilepsy. Utilizing our device, closed-loop processing consumes only 14nJ of power per PID cycle compared to 1.52μJ per cycle for a micro-controller implementation. Compared to an application specific digital integrated circuit, flash FPGA's are inherently programmable.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potts, C.; Faber, M.; Gunderson, G.

The as-built lattice of the Rapid-Cycling Synchrotron (RCS) had two sets of correction sextupoles and two sets of quadrupoles energized by dc power supplies to control the tune and the tune tilt. With this method of powering these magnets, adjustment of tune conditions during the accelerating cycle as needed was not possible. A set of dynamically programmable power supplies has been built and operated to provide the required chromaticity adjustment. The short accelerating time (16.7 ms) of the RCS and the inductance of the magnets dictated large transistor amplifier power supplies. The required time resolution and waveform flexibility indicated themore » desirability of computer control. Both the amplifiers and controls are described, along with resulting improvements in the beam performance. A set of octupole magnets and programmable power supplies with similar dynamic qualities have been constructed and installed to control the anticipated high-intensity transverse instability. This system will be operational in the spring of 1981.« less

Programmable Low-Power Low-Noise Capacitance to Voltage Converter for MEMS Accelerometers

PubMed Central

Royo, Guillermo; Sánchez-Azqueta, Carlos; Gimeno, Cecilia; Aldea, Concepción; Celma, Santiago

2016-01-01

In this work, we present a capacitance-to-voltage converter (CVC) for capacitive accelerometers based on microelectromechanical systems (MEMS). Based on a fully-differential transimpedance amplifier (TIA), it features a 34-dB transimpedance gain control and over one decade programmable bandwidth, from 75 kHz to 1.2 MHz. The TIA is aimed for low-cost low-power capacitive sensor applications. It has been designed in a standard 0.18-μm CMOS technology and its power consumption is only 54 μW. At the maximum transimpedance configuration, the TIA shows an equivalent input noise of 42 fA/Hz at 50 kHz, which corresponds to 100 μg/Hz. PMID:28042830

Programmable Low-Power Low-Noise Capacitance to Voltage Converter for MEMS Accelerometers.

PubMed

Royo, Guillermo; Sánchez-Azqueta, Carlos; Gimeno, Cecilia; Aldea, Concepción; Celma, Santiago

2016-12-30

In this work, we present a capacitance-to-voltage converter (CVC) for capacitive accelerometers based on microelectromechanical systems (MEMS). Based on a fully-differential transimpedance amplifier (TIA), it features a 34-dB transimpedance gain control and over one decade programmable bandwidth, from 75 kHz to 1.2 MHz. The TIA is aimed for low-cost low-power capacitive sensor applications. It has been designed in a standard 0.18-μm CMOS technology and its power consumption is only 54 μW. At the maximum transimpedance configuration, the TIA shows an equivalent input noise of 42 fA/ Hz at 50 kHz, which corresponds to 100 μg/ Hz .

Effect of interval training on cognitive functioning and cerebral oxygenation in obese patients: a pilot study.

PubMed

Drigny, Joffrey; Gremeaux, Vincent; Dupuy, Olivier; Gayda, Mathieu; Bherer, Louis; Juneau, Martin; Nigam, Anil

2014-11-01

To assess the effect of a 4-month high-intensity interval training programme on cognitive functioning, cerebral oxygenation, central haemodynamic and cardiometabolic parameters and aerobic capacity in obese patients. Cognitive functioning, cerebral oxygenation, central haemodynamic, cardiometabolic and exercise para-meters were measured before and after a 4-month high-intensity interval training programme in 6 obese patients (mean age 49 years (standard deviation 8), fat mass percentage 31 ± 7%). Body composition (body mass, total and trunk fat mass, waist circumference) and fasting insulin were improved after the programme (p < 0.05). V. O2 and power output at ventilatory threshold and peak power output were improved after the programme (p < 0.05). Cognitive functioning, including short-term and verbal memory, attention and processing speed, was significantly improved after training (p < 0.05). Cerebral oxygen extraction was also improved after training (p < 0.05). These preliminary results indicate that a 4-month high-intensity interval training programme in obese patients improved both cognitive functioning and cere-bral oxygen extraction, in association with improved exercise capacity and body composition.

Microgrids | Grid Modernization | NREL

Science.gov Websites

algorithms for microgrid integration Controller hardware-in-the-loop testing, where the physical controller interacts with a model of the microgrid and associated power devices Power hardware-in-the-loop testing of operation was validated in a power hardware-in-the-loop experiment using a programmable DC power supply to

The path to fusion power†

PubMed Central

Smith, Chris Llewellyn; Cowley, Steve

2010-01-01

The promise, status and challenges of developing fusion power are outlined. The key physics and engineering principles are described and recent progress quantified. As the successful demonstration of 16 MW of fusion in 1997 in the Joint European Torus showed, fusion works. The central issue is therefore to make it work reliably and economically on the scale of a power station. We argue that to meet this challenge in 30 years we must follow the aggressive programme known as the ‘Fast Track to Fusion’. This programme is described in some detail. PMID:20123748

Controlling sediment collection with data loggers

Treesearch

Rand E. Eads

1991-01-01

Abstract - The proliferation of commercial non-programmable data loggers in the past five years has done little to increase sediment sampling efficiency in remote locations. Recent advances in microelectronics have encouraged the development of commercial, low-power, programmable data loggers at reasonable cost. Although some facets of hydrologic data collection may...

Smart house-based optimal operation of thermal unit commitment for a smart grid considering transmission constraints

NASA Astrophysics Data System (ADS)

Howlader, Harun Or Rashid; Matayoshi, Hidehito; Noorzad, Ahmad Samim; Muarapaz, Cirio Celestino; Senjyu, Tomonobu

2018-05-01

This paper presents a smart house-based power system for thermal unit commitment programme. The proposed power system consists of smart houses, renewable energy plants and conventional thermal units. The transmission constraints are considered for the proposed system. The generated power of the large capacity renewable energy plant leads to the violated transmission constraints in the thermal unit commitment programme, therefore, the transmission constraint should be considered. This paper focuses on the optimal operation of the thermal units incorporated with controllable loads such as Electrical Vehicle and Heat Pump water heater of the smart houses. The proposed method is compared with the power flow in thermal units operation without controllable loads and the optimal operation without the transmission constraints. Simulation results show the validation of the proposed method.

Postflight reconditioning for European Astronauts - A case report of recovery after six months in space.

PubMed

Petersen, Nora; Lambrecht, Gunda; Scott, Jonathan; Hirsch, Natalie; Stokes, Maria; Mester, Joachim

2017-01-01

Postflight reconditioning of astronauts is understudied. Despite a rigorous, daily inflight exercise countermeasures programme during six months in microgravity (μG) on-board the International Space Station (ISS), physiological impairments occur and postflight reconditioning is still required on return to Earth. Such postflight programmes are implemented by space agency reconditioning specialists. Case Description and Assessments: A 38 year old male European Space Agency (ESA) crewmember's pre- and postflight (at six and 21 days after landing) physical performance from a six-month mission to ISS are described. muscle strength (squat and bench press 1 Repetition Maximum) and power (vertical jump), core muscle endurance and hip flexibility (Sit and Reach, Thomas Test). In-flight, the astronaut undertook a rigorous daily (2-h) exercise programme. The 21 day postflight reconditioning exercise concept focused on motor control and functional training, and was delivered in close co-ordination by the ESA physiotherapist and exercise specialist to provide the crewmember with comprehensive reconditioning support. Despite an intensive inflight exercise programme for this highly motivated crewmember, postflight performance showed impairments at R+6 for most parameters, all of which recovered by R+21 except muscular power (jump tests). Regardless of intense inflight exercise countermeasures and excellent compliance to postflight reconditioning, postflight performance showed impairments at R+6 for most parameters. Complex powerful performance tasks took longer to return to preflight values. Research is needed to develop optimal inflight and postflight exercise programmes to overcome the negative effects of microgravity and return the astronaut to preflight status as rapidly as possible. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nine-channel mid-power bipolar pulse generator based on a field programmable gate array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haylock, Ben, E-mail: benjamin.haylock2@griffithuni.edu.au; Lenzini, Francesco; Kasture, Sachin

Many channel arbitrary pulse sequence generation is required for the electro-optic reconfiguration of optical waveguide networks in Lithium Niobate. Here we describe a scalable solution to the requirement for mid-power bipolar parallel outputs, based on pulse patterns generated by an externally clocked field programmable gate array. Positive and negative pulses can be generated at repetition rates up to 80 MHz with pulse width adjustable in increments of 1.6 ns across nine independent outputs. Each channel can provide 1.5 W of RF power and can be synchronised with the operation of other components in an optical network such as light sourcesmore » and detectors through an external clock with adjustable delay.« less

Power increase at first ProCure21 project.

PubMed

2007-06-01

Throughout the UK, hospitals are embarking on new-build programmes to meet the needs of growing communities. However, site acreage and accommodation are often already under pressure, as Dale Power Solutions found when it was commissioned to increase standby power availability at the Friarage Hospital in Northallerton, North Yorkshire.

Premier League Reading STARS 2013/14. Evaluation Report

ERIC Educational Resources Information Center

Pabion, Clémence

2015-01-01

The National Literacy Trust's Premier League Reading Stars programme (PLRS) is a reading intervention for children aged 8 to 13 that captures the motivational power of football to inspire children and young people to read more and to improve their literacy skills. PLRS is delivered by teachers and librarians. The programme delivers statutory…

Tackling the Knowledge: Action Gap in Sustainable Consumption--Insights from a Participatory School Programme

ERIC Educational Resources Information Center

Barth, Matthias; Fischer, Daniel; Michelsen, Gerd; Nemnich, Claudia; Rode, Horst

2012-01-01

In the international policy discourse on sustainable consumption and production, education is acknowledged to be a powerful tool in changing unsustainable patterns of consumption. Current educational policies and programmes have responded to the consumption challenge mainly by including and addressing consumption issues in formal tuition in…

"Tidy, Toned and Fit": Locating Healthism within Elite Athlete Programmes

ERIC Educational Resources Information Center

Brown, Seth

2017-01-01

Coaches and athletes have been increasingly inundated with power related "truths" about their bodies, health and performance as they construct their subjectivities. Over the last couple of decades in New Zealand, schools have initiated elite athlete programmes (EAPs) for a select few students based primarily on their athletic ability and…

Throughput and latency programmable optical transceiver by using DSP and FEC control.

PubMed

Tanimura, Takahito; Hoshida, Takeshi; Kato, Tomoyuki; Watanabe, Shigeki; Suzuki, Makoto; Morikawa, Hiroyuki

2017-05-15

We propose and experimentally demonstrate a proof-of-concept of a programmable optical transceiver that enables simultaneous optimization of multiple programmable parameters (modulation format, symbol rate, power allocation, and FEC) for satisfying throughput, signal quality, and latency requirements. The proposed optical transceiver also accommodates multiple sub-channels that can transport different optical signals with different requirements. Multi-degree-of-freedom of the parameters often leads to difficulty in finding the optimum combination among the parameters due to an explosion of the number of combinations. The proposed optical transceiver reduces the number of combinations and finds feasible sets of programmable parameters by using constraints of the parameters combined with a precise analytical model. For precise BER prediction with the specified set of parameters, we model the sub-channel BER as a function of OSNR, modulation formats, symbol rates, and power difference between sub-channels. Next, we formulate simple constraints of the parameters and combine the constraints with the analytical model to seek feasible sets of programmable parameters. Finally, we experimentally demonstrate the end-to-end operation of the proposed optical transceiver with offline manner including low-density parity-check (LDPC) FEC encoding and decoding under a specific use case with latency-sensitive application and 40-km transmission.

Field Programmable Gate Array for Implementation of Redundant Advanced Digital Feedback Control

NASA Technical Reports Server (NTRS)

King, K. D.

2003-01-01

The goal of this effort was to develop a digital motor controller using field programmable gate arrays (FPGAs). This is a more rugged approach than a conventional microprocessor digital controller. FPGAs typically have higher radiation (rad) tolerance than both the microprocessor and memory required for a conventional digital controller. Furthermore, FPGAs can typically operate at higher speeds. (While speed is usually not an issue for motor controllers, it can be for other system controllers.) Other than motor power, only a 3.3-V digital power supply was used in the controller; no analog bias supplies were used. Since most of the circuit was implemented in the FPGA, no additional parts were needed other than the power transistors to drive the motor. The benefits that FPGAs provide over conventional designs-lower power and fewer parts-allow for smaller packaging and reduced weight and cost.

Dangers associated with civil nuclear power programmes: weaponization and nuclear waste.

PubMed

Boulton, Frank

2015-07-24

The number of nuclear power plants in the world rose exponentially to 420 by 1990 and peaked at 438 in 2002; but by 2014, as closed plants were not replaced, there were just 388. In spite of using more renewable energy, the world still relies on fossil fuels, but some countries plan to develop new nuclear programmes. Spent nuclear fuel, one of the most dangerous and toxic materials known, can be reprocessed into fresh fuel or into weapons-grade materials, and generates large amounts of highly active waste. This article reviews available literature on government and industry websites and from independent analysts on world energy production, the aspirations of the 'new nuclear build' programmes in China and the UK, and the difficulties in keeping the environment safe over an immense timescale while minimizing adverse health impacts and production of greenhouse gases, and preventing weaponization by non-nuclear-weapons states acquiring civil nuclear technology.

Power, community mobilization, and condom use practices among female sex workers in Andhra Pradesh, India.

PubMed

Blankenship, Kim M; West, Brooke S; Kershaw, Trace S; Biradavolu, Monica R

2008-12-01

We used a structural interventions framework to analyse the associations between power and condom use among a sample of female sex workers (FSW), and how exposure to a local community mobilization intervention (CMI) affects these associations. Data came from a cross-sectional survey of 812 FSW in the East Godavari district of Andhra Pradesh, India, recruited through respondent-driven sampling. We identified three types of power - collective power, control over work, and economic power, and three dimensions of collective power - collective identity, efficacy, and agency. Multivariate logistic regression analysis was used to analyse the relationship of these three types of power and exposure to a CMI with consistent condom use with clients. A total of 803 respondents exchanged sex with an occasional or regular client in the 7 days before the interview. Multivariate logistic regression shows that control over both the type of sex [adjusted odds ratio (AOR) 1.70, 95% confidence interval (CI) 1.23-2.34] and the amount charged (AOR 1.56, 95% CI 1.12-2.16), and economic dependence (AOR 0.54, 95% CI 0.35-0.83) are associated with consistent condom use as is programme exposure (AOR 2.09, 95% CI 1.48-2.94). The interaction between programme exposure and collective agency was also significant (chi-square 6.62, P = 0.01). Among respondents who reported both programme exposure and high levels of collective agency, the odds ratio of consistent condom use was 2.5 times that of other FSW. A structural interventions framework is useful for understanding HIV risk among FSW. More needs to be done to promote FSW control over work and access to economic resources.

USE Efficiency: an innovative educational programme for energy efficiency in buildings

NASA Astrophysics Data System (ADS)

Papadopoulos, Theofilos A.; Christoforidis, Georgios C.; Papagiannis, Grigoris K.

2017-10-01

Power engineers are expected to play a pivotal role in transforming buildings into smart and energy-efficient structures, which is necessary since buildings are responsible for a considerable amount of the total energy consumption. To fulfil this role, a holistic approach in education is required, tackling subjects traditionally related to other engineering disciplines. In this context, USE Efficiency is an inter-institutional and interdisciplinary educational programme implemented in nine European Universities targeting energy efficiency in buildings. The educational programme effectively links professors, students, engineers and industry experts, creating a unique learning environment. The scope of the paper is to present the methodology and the general framework followed in the USE Efficiency programme. The proposed methodology can be adopted for the design and implementation of educational programmes on energy efficiency and sustainable development in higher education. End-of-course survey results showed positive feedback from the participating students, indicating the success of the programme.

The Influence of Supranational Organizations on Educational Programme Planning in the Least Developed Countries: The Case of Nepal

ERIC Educational Resources Information Center

Regmi, Kapil Dev

2015-01-01

Amidst growing criticisms of global financial institutions, primarily the World Bank, this article explores their influence on educational programme planning in some of the impoverished nations known as the Least Developed Countries (LDCs). The domination of these institutions originates not only from their monetary power but also from the…

Programmable, secondary frequency standard based infrared synthesizer using tunable lead-salt diode lasers

NASA Technical Reports Server (NTRS)

Freed, C.; Bielinski, J. W.; Lo, W.

1983-01-01

Quantum phase noise limited Lorentzian power spectral densities were achieved with tunable lead-salt diode lasers. Linewidths as narrow as 22 kHz were observed. A truly programmable infrared synthesizer was produced by frequency-offset-locking the tunable diode lasers to the combination of a stable CO2 (or CO) reference laser and a programmable microwave frequency synthesizer. Absolute frequency accuracy and reproducibility of about + or - 30 kHz (0.000001 kaysers) relative to the primary Cs frequency standard may now be obtained with this technique.

Relay Protection and Automation Systems Based on Programmable Logic Integrated Circuits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lashin, A. V., E-mail: LashinAV@lhp.ru; Kozyrev, A. V.

One of the most promising forms of developing the apparatus part of relay protection and automation devices is considered. The advantages of choosing programmable logic integrated circuits to obtain adaptive technological algorithms in power system protection and control systems are pointed out. The technical difficulties in the problems which today stand in the way of using relay protection and automation systems are indicated and a new technology for solving these problems is presented. Particular attention is devoted to the possibility of reconfiguring the logic of these devices, using programmable logic integrated circuits.

Proceedings, 15th Annual Meeting, Aquatic Plant Control Research Planning and Operations Review, held 17-20 November 1980, Savannah, Georgia.

DTIC Science & Technology

1981-10-01

transmitter/ receiver (the AGNAV guidance system), a TI - 59 programmable calculator with a TI PC-1O0 thermal printer and direct current (DC) to alternating...the TI - 59 programmable calculator mounted on the TI PC-100 thermal printer and the 12-v DC to 120-v AC inverter. Power for both the mobile and...dropped, the new A2 B2 distances are keyed into the calculator, and * Magnetic cards, readable on a TI - 59 programmable calculator , with all programs

Multi-Mission Power Analysis Tool (MMPAT) Version 3

NASA Technical Reports Server (NTRS)

Wood, Eric G.; Chang, George W.; Chen, Fannie C.

2012-01-01

The Multi-Mission Power Analysis Tool (MMPAT) simulates a spacecraft power subsystem including the power source (solar array and/or radioisotope thermoelectric generator), bus-voltage control, secondary battery (lithium-ion or nickel-hydrogen), thermostatic heaters, and power-consuming equipment. It handles multiple mission types including heliocentric orbiters, planetary orbiters, and surface operations. Being parametrically driven along with its user-programmable features can reduce or even eliminate any need for software modifications when configuring it for a particular spacecraft. It provides multiple levels of fidelity, thereby fulfilling the vast majority of a project s power simulation needs throughout the lifecycle. It can operate in a stand-alone mode with a graphical user interface, in batch mode, or as a library linked with other tools. This software can simulate all major aspects of a spacecraft power subsystem. It is parametrically driven to reduce or eliminate the need for a programmer. Added flexibility is provided through user-designed state models and table-driven parameters. MMPAT is designed to be used by a variety of users, such as power subsystem engineers for sizing power subsystem components; mission planners for adjusting mission scenarios using power profiles generated by the model; system engineers for performing system- level trade studies using the results of the model during the early design phases of a spacecraft; and operations personnel for high-fidelity modeling of the essential power aspect of the planning picture.

The Power of the Drum and Other Stories = Isigubhu sezimanga nezinye izindaba.

ERIC Educational Resources Information Center

Lyster, Elda, Ed.; Dlamini, Bongiwe, Ed.

This book, written in English and Zulu, presents stories written by older people from the Muthande Society for the Aged Literacy Programme in South Africa. It is suitable for people learning to read for the first time or for people learning to read in a second language. In the Muthande Society for the Aged Literacy Programme, both teachers and…

Moving Elite Athletes Forward: Examining the Status of Secondary School Elite Athlete Programmes and Available Post-School Options

ERIC Educational Resources Information Center

Brown, Seth

2015-01-01

Purpose: The purpose of this study focused specifically on examining the status of and the promotion of two elite athlete programmes (EAPs), the students/elite athlete selection process and available post-school options. The research was guided by Michel Foucault's work in understanding the relationship between power and knowledge. Participants,…

Why Offer the International Baccalaureate Middle Years Programme? A Comparison between Schools in Asia-Pacific and Other Regions

ERIC Educational Resources Information Center

Wright, Ewan; Lee, Moosung; Tang, Hayes; Chak Pong Tsui, Gordon

2016-01-01

The International Baccalaureate (IB) has become a powerful educational brand by developing a reputation for combining progressive approaches with academic rigour. This can be identified by the growing number of schools adopting IB programmes globally and especially in the IB Asia-Pacific region. As part of this trend, the IB Middle Years Programme…

The effect of two different interval-training programmes on physiological and performance indices.

PubMed

Sindiani, Mahmood; Eliakim, Alon; Segev, Daria; Meckel, Yoav

2017-08-01

The aim of the present study was to compare the effect of an increasing-distance, interval-training programme and a decreasing-distance, interval-training programme, matched for total distance, on aerobic and anaerobic physiological indices. Forty physical education students were randomly assigned to either the increasing- or decreasing-distance, interval-training group (ITG and DTG), and completed two similar relevant sets of tests before and after six weeks of training. One training programme consisted of increasing-distance interval-training (100-200-300-400-500 m) and the other decreasing-distance interval training (500-400-300-200-100 m). While both training programmes led to a significant improvement in VO 2 max (ES = 0.83-1.25), the improvement in the DTG was significantly greater than in the ITG (14.5 ± 3.6 vs. 7.8 ± 3.2%, p < .05). In addition, while both training programmes led to a significant improvement in all anaerobic indices (ES = 0.83-1.63), the improvements in peak power (15.7 ± 7.8 vs. 8.9 ± 4.7), mean power (10.6 ± 5.4 vs. 6.8 ± 4.4), and fatigue index (18.2 ± 10.9 vs. 7.0 ± 14.2) were significantly greater in the DTG compared to the ITG (p < .05). The main finding of the present study was that beyond the significant positive effects of both training programmes on aerobic and anaerobic fitness, the DTG showed significant superiority over the ITG in improving aerobic and anaerobic performance capabilities. Coaches and athletes should therefore be aware that, in spite of identical total work, an interval-training programme might induce different physiological impacts if the order of intervals is not identical.

Progress in preliminary studies at Ottana Solar Facility

NASA Astrophysics Data System (ADS)

Demontis, V.; Camerada, M.; Cau, G.; Cocco, D.; Damiano, A.; Melis, T.; Musio, M.

2016-05-01

The fast increasing share of distributed generation from non-programmable renewable energy sources, such as the strong penetration of photovoltaic technology in the distribution networks, has generated several problems for the management and security of the whole power grid. In order to meet the challenge of a significant share of solar energy in the electricity mix, several actions aimed at increasing the grid flexibility and its hosting capacity, as well as at improving the generation programmability, need to be investigated. This paper focuses on the ongoing preliminary studies at the Ottana Solar Facility, a new experimental power plant located in Sardinia (Italy) currently under construction, which will offer the possibility to progress in the study of solar plants integration in the power grid. The facility integrates a concentrating solar power (CSP) plant, including a thermal energy storage system and an organic Rankine cycle (ORC) unit, with a concentrating photovoltaic (CPV) plant and an electrical energy storage system. The facility has the main goal to assess in real operating conditions the small scale concentrating solar power technology and to study the integration of the two technologies and the storage systems to produce programmable and controllable power profiles. A model for the CSP plant yield was developed to assess different operational strategies that significantly influence the plant yearly yield and its global economic effectiveness. In particular, precise assumptions for the ORC module start-up operation behavior, based on discussions with the manufacturers and technical datasheets, will be described. Finally, the results of the analysis of the: "solar driven", "weather forecasts" and "combined storage state of charge (SOC)/ weather forecasts" operational strategies will be presented.

Design and Development of High Voltage Direct Current (DC) Sources for the Solar Array Module Plasma Interaction Experiment

NASA Technical Reports Server (NTRS)

Bibyk, Irene K.; Wald, Lawrence W.

1995-01-01

Two programmable, high voltage DC power supplies were developed as part of the flight electronics for the Solar Array Module Plasma Interaction Experiment (SAMPIE). SAMPIE's primary objectives were to study and characterize the high voltage arcing and parasitic current losses of various solar cells and metal samples within the space plasma of low earth orbit (LEO). High voltage arcing can cause large discontinuous changes in spacecraft potential which lead to damage of the power system materials and significant Electromagnetic Interference (EMI). Parasitic currents cause a change in floating potential which lead to reduced power efficiency. These primary SAMPIE objectives were accomplished by applying artificial biases across test samples over a voltage range from -600 VDC to +300 VDC. This paper chronicles the design, final development, and test of the two programmable high voltage sources for SAMPIE. The technical challenges to the design for these power supplies included vacuum, space plasma effects, thermal protection, Shuttle vibrations and accelerations.

An All-Digital Fast Tracking Switching Converter with a Programmable Order Loop Controller for Envelope Tracking RF Power Amplifiers

PubMed Central

Anabtawi, Nijad; Ferzli, Rony; Harmanani, Haidar M.

2017-01-01

This paper presents a step down, switched mode power converter for use in multi-standard envelope tracking radio frequency power amplifiers (RFPA). The converter is based on a programmable order sigma delta modulator that can be configured to operate with either 1st, 2nd, 3rd or 4th order loop filters, eliminating the need for a bulky passive output filter. Output ripple, sideband noise and spectral emission requirements of different wireless standards can be met by configuring the modulator’s filter order and converter’s sampling frequency. The proposed converter is entirely digital and is implemented in 14nm bulk CMOS process for post layout verification. For an input voltage of 3.3V, the converter’s output can be regulated to any voltage level from 0.5V to 2.5V, at a nominal switching frequency of 150MHz. It achieves a maximum efficiency of 94% at 1.5 W output power. PMID:28919657

Smart Power Supply for Battery-Powered Systems

NASA Technical Reports Server (NTRS)

Krasowski, Michael J.; Greer, Lawrence; Prokop, Norman F.; Flatico, Joseph M.

2010-01-01

A power supply for battery-powered systems has been designed with an embedded controller that is capable of monitoring and maintaining batteries, charging hardware, while maintaining output power. The power supply is primarily designed for rovers and other remote science and engineering vehicles, but it can be used in any battery alone, or battery and charging source applications. The supply can function autonomously, or can be connected to a host processor through a serial communications link. It can be programmed a priori or on the fly to return current and voltage readings to a host. It has two output power busses: a constant 24-V direct current nominal bus, and a programmable bus for output from approximately 24 up to approximately 50 V. The programmable bus voltage level, and its output power limit, can be changed on the fly as well. The power supply also offers options to reduce the programmable bus to 24 V when the set power limit is reached, limiting output power in the case of a system fault detected in the system. The smart power supply is based on an embedded 8051-type single-chip microcontroller. This choice was made in that a credible progression to flight (radiation hard, high reliability) can be assumed as many 8051 processors or gate arrays capable of accepting 8051-type core presently exist and will continue to do so for some time. To solve the problem of centralized control, this innovation moves an embedded microcontroller to the power supply and assigns it the task of overseeing the operation and charging of the power supply assets. This embedded processor is connected to the application central processor via a serial data link such that the central processor can request updates of various parameters within the supply, such as battery current, bus voltage, remaining power in battery estimations, etc. This supply has a direct connection to the battery bus for common (quiescent) power application. Because components from multiple vendors may have differing power needs, this supply also has a secondary power bus, which can be programmed a priori or on-the-fly to boost the primary battery voltage level from 24 to 50 V to accommodate various loads as they are brought on line. Through voltage and current monitoring, the device can also shield the charging source from overloads, keep it within safe operating modes, and can meter available power to the application and maintain safe operations.

Study of a programmable high speed processor for use on-board satellites

NASA Astrophysics Data System (ADS)

Degavre, J. Cl.; Okkes, R.; Gaillat, G.

The availability of VLSI programmable devices will significantly enhance satellite on-board data processing capabilities. A case study is presented which indicates that computation-intensive processing applications requiring the execution of 100 megainstructions/sec are within the CD power constraints of satellites. It is noted that the current progress in semicustom design technique development and in achievable gate array densities, together with the recent announcement of improved monochip processors, are encouraging the development of an on-board programmable processor architecture able to associate the devices that will appear in communication and military markets.

Through Kazan ASPERA to Modern Projects

NASA Astrophysics Data System (ADS)

Gusev, Alexander; Kitiashvili, Irina; Petrova, Natasha

Now the European Union form the Sixth Framework Programme. One of its the objects of the EU Programme is opening national researches and training programmes. The Russian PhD students and young astronomers have business and financial difficulties in access to modern databases and astronomical projects and so they has not been included in European overview of priorities. Modern requirements to the organization of observant projects on powerful telescopes assumes painstaking scientific computer preparation of the application. A rigid competition for observation time assume preliminary computer modeling of target object for success of the application. Kazan AstroGeoPhysics Partnership

Pre-Service Teachers' Belief Sources about Learning and Teaching: An Exploration with the Consideration of the Educational Programme Nature

ERIC Educational Resources Information Center

Debreli, Emre

2016-01-01

It is often said that beliefs determine the ways teachers think and act in classrooms. There is now strong evidence that teachers' beliefs are formed during their previous education as students, and that they exert a powerful influence throughout their careers. However, only little has yet been done on the teacher education programmes' influence…

Installation package for integrated programmable electronic controller and hydronic subsystem - solar heating and cooling

NASA Technical Reports Server (NTRS)

1978-01-01

A description is given of the Installation, Operation, and Maintenance Manual and information on the power panel and programmable microprocessor, a hydronic solar pump system and a hydronic heating hot water pumping system. These systems are integrated into various configurations for usages in solar energy management, control and monitoring, lighting control, data logging and other solar related applications.

Transforming a municipal school sports programme through a critical communicative methodology: The role of the of advisory committee.

PubMed

Jiménez-Herranz, Borja; Manrique-Arribas, Juan C; López-Pastor, Víctor M; García-Bengoechea, Enrique

2016-10-01

This research applies a communicative methodology (CM) to the transformation and improvement of the Municipal Comprehensive School Sports Programme in Segovia, Spain (MCSSP), using egalitarian dialogue, based on validity rather than power claims to achieve intersubjectivity and arrive at consensus between all of the Programme's stakeholders through the intervention of an advisory committee (AC). The AC is a body comprising representatives of all stakeholder groups involved in the programme. During the 2013-2014 academic year the programme's AC met four times, operating as a communicative focus group (CFG). The meetings focused on: (1) excluding dimensions (barriers preventing transformation) and transforming dimensions (ways of overcoming barriers), (2) the programme's strengths, (3) the programme's weaknesses and specific actions to remedy them, and (4) the resulting conclusions which were then incorporated into the subsequent programme contract signed between the University and the Segovia Local Authority for 2014-2018. The key conclusions were: (1) the recommendations of the AC widen the range of perspectives and help the research team to make key decisions and (2) the use of CM to fully evaluate the programme and to reach a consensus on how to improve it proved very valuable. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of high-intensity power-frequency electric fields on implanted modern multiprogrammable cardiac pacemakers.

PubMed

Butrous, G S; Meldrum, S J; Barton, D G; Male, J C; Bonnell, J A; Camm, A J

1982-05-01

The effect on an implanted, multiprogrammable pacemaker of power-frequency (50 Hz) electric fields up to an intensity (unperturbed value measured at 1.7 m) of 20 kV/m were assessed in ten paced patients. Radiotelemetric monitoring of the electrocardiogram allowed supervision of the electrocardiogram throughout exposure to the alternating electric field. Displacement body currents of up to 300μA were achieved depending on the position and height of the patient. None of the pacemakers was inhibited, triggered or reverted to fixed rate operation during the exposure. The programmable functions, programmability or output characteristics were not affected. Small changes in cardiac rate and rhythm elicited the correct pacemaker responses. Unlike earlier models of pacemaker, this modern implanted pacemaker, which represents `the state of the art', is not affected by 50 Hz electric fields likely to be encountered when standing underneath power lines.

Incipient fault detection and power system protection for spaceborne systems

NASA Technical Reports Server (NTRS)

Russell, B. Don; Hackler, Irene M.

1987-01-01

A program was initiated to study the feasibility of using advanced terrestrial power system protection techniques for spacecraft power systems. It was designed to enhance and automate spacecraft power distribution systems in the areas of safety, reliability and maintenance. The proposed power management/distribution system is described as well as security assessment and control, incipient and low current fault detection, and the proposed spaceborne protection system. It is noted that the intelligent remote power controller permits the implementation of digital relaying algorithms with both adaptive and programmable characteristics.

Solar Power from Space - Validation of Options for Europe

NASA Astrophysics Data System (ADS)

Summerer, L.; Ongaro, F.

2004-12-01

Solar power plants are among promising long-term energy options of the 21st century, covering humanities ever increasing energy need in a sustainable way free of greenhouse gas emission. Terrestrial solar power is one of the fastest growing energy sectors with high growth rates sustained over more than a decade and very promising forecasts. Since 30 years the idea of a large solar power plant in Earth orbit, transmitting energy to Earth-bound receiver sites enjoys periodic attention from energy and space entities. All studies concluded the principal technical feasibility of the concepts and gradually improved their power to mass ratio. No substantial development efforts were undertaken however since with current technology space generated electricity costs would still be too high, upfront costs prohibitive and the launcher sector not mature enough to reduce e/kg to orbit costs by the required order of magnitude. In the past space concepts were mainly compared to traditional energy systems. Based on this background, the Advanced Concepts Team (ACT) at the European Space Agency started a three-phased programme in 2003. The first phase of the programme, the Validation Phase, focussed on a comparison of space solar power plant with comparable terrestrial solutions on the one hand and the assessment of the potential of SPS for space exploration and space application on the other. The focus was mainly on Europe and should give an independent technical answer to the seemingly primitive question: "Why put power plants into space when there is so much sun in southern Europe and especially in the close-by North-African Sahara desert?". Space concepts were compared to terrestrial solutions based on equally advanced technology and equal economic conditions for the timeframe 2020/30 in terms of energy payback times, final e/kWh generation costs, adaptability to different energy scenarios, reliability and risk. Key words: ESA SPS Programme Plan; Strategy.

Preventing deaths and injuries from house fires: an outcome evaluation of a community-based smoke alarm installation programme.

PubMed

Istre, Gregory R; McCoy, Mary A; Moore, Billy J; Roper, Carey; Stephens-Stidham, Shelli; Barnard, Jeffrey J; Carlin, Debra K; Stowe, Martha; Anderson, Ron J

2014-04-01

Few studies have examined the impact of community-based smoke alarm (SA) distribution programmes on the occurrence of house fire-related deaths and injuries (HF-D/I). To determine whether the rate of HF-D/I differed for programme houses that had a SA installed through a community-based programme called Operation Installation, versus non-programme houses in the same census tracts that had not received such a SA. Teams of volunteers and firefighters canvassed houses in 36 high-risk target census tracts in Dallas, TX, between April 2001 and April 2011, and installed lithium-powered SAs in houses where residents were present and gave permission. We then followed incidence of HF-D/I among residents of the 8134 programme houses versus the 24 346 non-programme houses. After a mean of 5.2 years of follow-up, the unadjusted HF-D/I rate was 68% lower among residents of programme houses versus non-programme houses (3.1 vs 9.6 per 100 000 population, respectively; rate ratio, 0.32; 95% CI 0.10 to 0.84). Multivariate analysis including several demographic variables showed that the adjusted HF-D/I rate in programme houses was 63% lower than non-programme houses. The programme was most effective in the first 5 years after SA installation, with declining difference in rates after the 6th year, probably due to SAs becoming non-functional during that time. This collaborative, community-based SA installation programme was effective at preventing deaths and injuries from house fires, but the duration of effectiveness was less than 10 years.

The TACIS Nuclear Programme: Assistance in Upgrading Russian Nuclear Power Stations - An Overview of the Individual Projects in the Internet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bieth, Michel; Schoels, Hubert

2006-07-01

The European Union' TACIS1 programme has been established for the New Independent States (NIS), among them in the Russian Federation since 1991. One priority of TACIS funding is Nuclear Safety. The European Commission has made available a total of 944 Million Euros for nuclear safety programmes covering the period 1991-2003. The TACIS nuclear safety programme is devoted to the improvement of the safety of Soviet designed nuclear installations in providing technology and safety culture transfer. JRC is carrying out works in the following areas: On-Site Assistance for TACIS operating Nuclear Power Plants; Design Safety and Dissemination of TACIS results; Reactormore » Pressure Vessel Embrittlement for VVER; Regulatory Assistance; Industrial Waste Management; Nuclear Safeguards; All TACIS projects, dealing with these areas of activity are now available in so called Project Description Sheets (PDS) or Project Results Sheets (PRS) in the Internet for everybody. JRC has created in the Internet an easy to open and to browse database which contains the result of works in relation to the above mentioned nuclear activities. This presentation gives an on-line overview of the app. 430 projects which have been implemented so far since the outset of the TACIS Nuclear Programme in the Russian Federation, which is representative to the other CIS countries, benefiting from the TACIS. The presentation will mainly consist of an on-line-demonstration of the TACIS Nuclear WEB Page, created by JRC. (authors)« less

Understanding the Impact of Organizational Power on Evaluation Outcomes

ERIC Educational Resources Information Center

Kim, Hanbyul; Cervero, Ronald M.

2007-01-01

The purpose of this study is to examine how power relations among stakeholders, especially between the human resource development (HRD) practitioners and others, affect evaluation outcomes. Using a qualitative case study design, a managerial leadership development programme in a Korean company is analysed. This study shows that the HRD…

Analysis of Voltage and Current Signal Processing in a Li-ion Battery Management System

DTIC Science & Technology

2010-09-01

SUBJECT TERMS Pulsed Power, Charger, Buck Converter, Field Programmable Gate Array (FPGA), Lithium - ion Batteries 16. PRICE CODE 17. SECURITY...Congressional Research Service. July 31, 2000. [3] F. E. Filler, “A Pulsed Power System Design Using Lithium - ion Batteries and One Charger per Battery

Assessing the impact of a targeted plyometric training on changes in selected kinematic parameters of the swimming start.

PubMed

Rejman, Marek; Bilewski, Marek; Szczepan, Stefan; Klarowicz, Andrzej; Rudnik, Daria; Maćkała, Krzysztof

2017-01-01

The aim of this study was to analyse changes taking place within selected kinematic parameters of the swimming start, after completing a six-week plyometric training, assuming that the take-off power training improves its effectiveness. The experiment included nine male swimmers. In the pre-test the swimmers performed three starts focusing on the best performance. Next, a plyometric training programme, adapted from sprint running, was introduced in order to increase a power of the lower extremities. The programme entailed 75 minute sessions conducted twice a week. Afterwards, a post-test was performed, analogous to the pre-test. Spatio-temporal structure data of the swimming start were gathered from video recordings of the swimmer above and under water. Impulses triggered by the plyometric training contributed to a shorter start time (the main measure of start effectiveness) and glide time as well as increasing average take-off, flight and glide velocities including take-off, entry and glide instantaneous velocities. The glide angle decreased. The changes in selected parameters of the swimming start and its confirmed diagnostic values, showed the areas to be susceptible to plyometric training and suggested that applied plyometric training programme aimed at increasing take-off power enhances the effectiveness of the swimming start.

Empowering Women for Development through Community-Driven Sustainable Programmes: A Response to Traditional Patriarchal Power in the Southern African Region

ERIC Educational Resources Information Center

Braimoh, Dele; Lekoko, Rebecca; Alade, Eunice B.

2004-01-01

In the Southern Africa region, the act of prejudice against women mostly occurs where patriarchal power reigns. This type of power is felt in areas such as inheritance right, division of labour, access to political and economic resources and legal and social matters. Other areas of discrimination against women include access to educational and…

Temperature programmable microfabricated gas chromatography column

DOEpatents

Manginell, Ronald P.; Frye-Mason, Gregory C.

2003-12-23

A temperature programmable microfabricated gas chromatography column enables more efficient chemical separation of chemical analytes in a gas mixture by the integration of a resistive heating element and temperature sensing on the microfabricated column. Additionally, means are provided to thermally isolate the heated column from their surroundings. The small heat capacity and thermal isolation of the microfabricated column improves the thermal time response and power consumption, both important factors for portable microanalytical systems.

Criminal thinking shifts among male prisoners participating in a cognitive-based education programme.

PubMed

Warner, Cody; Conley, Timothy; Murphy, Riley

2018-04-01

Many prisoners rationalise criminal behaviour, and this type of thinking has been linked to recidivism. Correctional programmes for modifying criminal thinking can reshape how offenders view themselves and their circumstances. Our aim was to test whether participation in a cognitive-based curriculum called Steps to Economic and Personal Success (STEPS) was associated with changes in criminal thinking. The STEPS curriculum is delivered in 15 video-based facilitated classes. A pre-intervention/post-intervention survey design was applied to 128 adult male prisoners who completed the programme. Criminal thinking was measured by the Texas Christian University Criminal Thinking Scale, a self-report instrument with the six domains: entitlement, justification, power orientation, cold heartedness, criminal rationalisation and personal irresponsibility. Participants had lower scores in most of the criminal thinking domains after the intervention than before, with largest reductions in justification and power orientation. Findings provide evidence that attitudes to crime can be changed in a correctional setting, and the programme under study shows promise as an effective intervention for changing these attitudes among prisoners. Future research should build on these findings to examine whether and how such changes are related to desistance from offending behaviours. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

South African CSP projects under the REIPPP programme - Requirements, challenges and opportunities

NASA Astrophysics Data System (ADS)

Relancio, Javier; Cuellar, Alberto; Walker, Gregg; Ettmayr, Chris

2016-05-01

Thus far seven Concentrated Solar Power (CSP) projects have been awarded under the Renewable Energy Independent Power Producer Procurement Programme (REIPPPP), totalling 600MW: one project is in operation, four under construction and two on their way to financial close. This provides an excellent opportunity for analysis of key features of the projects that have contributed to or detracted from the programme's success. The paper draws from Mott MacDonald's involvement as Technical Advisor on the seven CSP projects that have been successful under the REIPPPP to date as well as other global CSP developments. It presents how various programme requirements have affected the implementation of projects, such as the technical requirements, time of day tariff structure, economic development requirements and the renewable energy grid code. The increasingly competitive tariffs offered have encouraged developers to investigate efficiency maximising project configurations and cost saving mechanisms, as well as featuring state of the art technology in their proposals. The paper assesses the role of the project participants (developers, lenders and government) with regards to these innovative technologies and solutions. In our paper we discuss the status of projects and the SA market, analysing the main challenges and opportunities that in turn have influenced various aspects such as technology choice, operational regimes and supply chain arrangements.

Innovative project management on the basis of programme-and-target approach for energy saving in the construction complex

NASA Astrophysics Data System (ADS)

Mottaeva, Angela

2017-10-01

Article is devoted to the consideration of the existing approaches to energy saving. According to the author’s opinion,the system approach is not enough for the achievement of the goal of the increase in energy efficiency and economy of energy, which is quite relevant for the world scientific community today, when the mankind has reached the certain power and ecological threshold. The author reasons the need of programme-and-target approach to energy saving and the increase in energy efficiency of buildings. The problems of the energy saving in current conditions are revealed. The provisional algorithm of the programme-and-target approach to energy efficiency. The expected results from introduction of the programme-and-target approach are presented in the article.

[Rehabilitation in COPD].

PubMed

Villiger, B

1999-03-01

Pulmonary rehabilitation (PR) is an important tool in the treatment of COPD patients. It is now clearly established that PR improves exercise capacity, reduces symptoms and improves quality of life in COPD patients. There is further evidence that the programmes also improve survival and reduce medical consumption. Pulmonary rehabilitation programmes are multidisziplinary and consist of exercise training (endurance, power), chest physiotherapie, education, psychosocial and nutritional support. Patients with poor exercise capacity, peripheral muscle weakness, severe complaints and poor quality of life seem to profit most from in- and outpatients rehab programmes. The type of rehabilitation depends on the severity of symptoms, the competence of the rehab-team and the local possibilities.

Interventions to reduce the use of seclusion and restraint in inpatient psychiatric settings: what we know so far a review of the literature.

PubMed

Scanlan, Justin Newton

2010-07-01

In recent times, much attention has been focused on the reduction of seclusion and restraint in psychiatric settings. This paper analyzes evidence available from evaluations of single seclusion and/or restraint reduction programmes. A total of 29 papers were included in the review. Seven key strategy types emerged from the analysis: (i) policy change/leadership; (ii) external review/debriefing; (iii) data use; (iv) training; (v) consumer/family involvement; (vi) increase in staff ratio/crisis response teams; and (vii) programme elements/changes. Outcomes indicate that a range of reduction programmes are successful in reducing the frequency and duration of seclusion and restraint use, while at the same time maintaining a safe environment. The development of new seclusion and restraint reduction programmes should include strong leadership from local management; external seclusion and restraint review committees or post-incident debriefing and analysis; broad-based staff training and programme changes at a local level. Behavioural and cognitive-behavioural programmes appear to be very useful in child and adolescent services. Further systematic research should be conducted to more fully understand which elements of successful programmes are the most powerful in reducing incidents of seclusion and restraint.

Programmable masks for optical information processing

NASA Technical Reports Server (NTRS)

Goebel, J. H.; Matsumoto, T.; Mina, C.; Welch, J.

1984-01-01

Research in progress at NASA Ames Research Center on programmable masks is discussed in this paper. One type is a large area format liquid crystal mask intended for binary optical computation problems. To date, an on-off contrast ratio of 500:1 has been achieved at a switching rate of 1 Hz. With a 32 x 32 format, a ratio 10 to the 4th power:1 is desirable. The switching contrast is entirely dependent on the polarized quality; therefore, it is believed that 10 to the 4th power:1 in transmission is possible. Larger format masks are under development. An application to Hadamard transform polarized imagery at wavelengths of 1.0 to 2.0 micrometers, which is competitive with the best monolithic infrared detector arrays, is discussed.

A programmable palm-size gas analyzer for use in micro-autonomous systems

NASA Astrophysics Data System (ADS)

Gordenker, Robert J. M.; Wise, Kensall D.

2012-06-01

Gas analysis systems having small size, low power, and high selectivity are badly needed for defense (detection of explosives and chemical warfare agents), homeland security, health care, and environmental applications. This paper presents a palm-size gas chromatography system having analysis times of 5-50sec, detection limits less than 1ppb, and an average power dissipation less than one watt. It uses no consumables. The three-chip fluidic system consists of a preconcentrator, a 25cm-3m separation column, and a chemi-resistive detector and is supported by a microcomputer and circuitry for programmable temperature control. The entire system, including the mini-pump and battery, occupies less than 200cc and is configured for use on autonomous robotic vehicles.

Promoting the health of Aboriginal Australians through empowerment: eliciting the components of the family well-being empowerment and leadership programme.

PubMed

Laliberté, Arlene; Haswell, Melissa; Tsey, Komla

2012-12-01

Most policies addressing Aboriginal health in Australia promote initiatives that are based on empowerment principles. Articulated programme components are necessary to support personal and group empowerment and to assist individuals in gaining the sense of control and purposefulness needed to exert their political and personal power in the face of the severe stress and powerlessness faced by the Australian Aboriginal people. This paper aims to provide a detailed description of the mechanisms underpinning a 'bottom-up' empowerment initiative, the Family well-being empowerment and leadership programme (FWB), and to analyze how the programme supports empowerment. The five stages of FWB were described and the validity of this model was assessed through the combination of participatory observation, documentation analysis, literature review, semi-structured interviews and iterative feedback with different analytical perspectives. Our study results articulated four distinct programme components: the setting plus inter-relational, educational and experiential actions. FWB is an example of the promotion of both outcome and process pathways towards empowerment. Potential applications of the programme are discussed.

Equitable Partnerships for Mutual Learning or Perpetuator of North-South Power Imbalances? Ireland-South Africa School Links

ERIC Educational Resources Information Center

Gallwey, Susan Kresky; Wilgus, Gay

2014-01-01

This study examines how various components of a school-linking programme between Ireland and South Africa either support Development Education's goal of sustainable, equitable partnerships that enable mutual learning between Northern and Southern countries or, instead, promote power imbalances that reify stereotypic images of weak, needy…

South Africa and the 21st Century Power Partnership: Paving the Way to a Clean, Reliable, and Resilient Power System

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

Established in 2012, the 21CPP South Africa Programme is a global initiative that connects South African stakeholders with an international communityof expertise. The overall goal of this program is to support South Africa's power system transformation by accelerating the transition to a reliable, financially robust, and low-carbon power system. 21CPP activities focus on achieving positive outcomes for all participants, especially addressing critical questions and challenges facing system planners, regulators, and operators.

A 4 μW/Ch analog front-end module with moderate inversion and power-scalable sampling operation for 3-D neural microsystems.

PubMed

Al-Ashmouny, Khaled M; Chang, Sun-Il; Yoon, Euisik

2012-10-01

We report an analog front-end prototype designed in 0.25 μm CMOS process for hybrid integration into 3-D neural recording microsystems. For scaling towards massive parallel neural recording, the prototype has investigated some critical circuit challenges in power, area, interface, and modularity. We achieved extremely low power consumption of 4 μW/channel, optimized energy efficiency using moderate inversion in low-noise amplifiers (K of 5.98 × 10⁸ or NEF of 2.9), and minimized asynchronous interface (only 2 per 16 channels) for command and data capturing. We also implemented adaptable operations including programmable-gain amplification, power-scalable sampling (up to 50 kS/s/channel), wide configuration range (9-bit) for programmable gain and bandwidth, and 5-bit site selection capability (selecting 16 out of 128 sites). The implemented front-end module has achieved a reduction in noise-energy-area product by a factor of 5-25 times as compared to the state-of-the-art analog front-end approaches reported to date.

Fully-elastic multi-granular network with space/frequency/time switching using multi-core fibres and programmable optical nodes.

PubMed

Amaya, N; Irfan, M; Zervas, G; Nejabati, R; Simeonidou, D; Sakaguchi, J; Klaus, W; Puttnam, B J; Miyazawa, T; Awaji, Y; Wada, N; Henning, I

2013-04-08

We present the first elastic, space division multiplexing, and multi-granular network based on two 7-core MCF links and four programmable optical nodes able to switch traffic utilising the space, frequency and time dimensions with over 6000-fold bandwidth granularity. Results show good end-to-end performance on all channels with power penalties between 0.75 dB and 3.7 dB.

A leadership programme for critical care.

PubMed

Crofts, Linda

2006-08-01

This paper describes the genesis, design and implementation of a leadership programme for critical care. This was an initiative funded by the National Health Service (NHS) Nursing Leadership Project and had at the core of its design flexibility to meet the needs of the individual hospitals, which took part in it. Participation was from the multi-disciplinary critical care team. Six NHS hospitals took part in the programme which was of 20 days duration and took place on hospital sites. The programme used the leadership model of as its template and had a number of distinct components; a baseline assessment, personal development, principles of leadership and critical case reviews. The programme was underpinned by three themes; working effectively in multi-professional teams to provide patient focussed care, managing change through effective leadership and developing the virtual critical care service. Each group set objectives pertinent to their own organisation's needs. The programme was evaluated by a self-reporting questionnaire; group feedback and feedback from stakeholders. Programme evaluation was positive from all the hospitals but it was clear that the impact of the programme varied considerably between the groups who took part. It was noted that there was some correlation between the success of the programme and organisational 'buy in' as well as the organisational culture within which the participants operated. A key feature of the programme success was the critical case reviews, which were considered to be a powerful learning tool and medium for group learning and change management.

Design and simulation of programmable relational optoelectronic time-pulse coded processors as base elements for sorting neural networks

NASA Astrophysics Data System (ADS)

Krasilenko, Vladimir G.; Nikolsky, Alexander I.; Lazarev, Alexander A.; Lazareva, Maria V.

2010-05-01

In the paper we show that the biologically motivated conception of time-pulse encoding usage gives a set of advantages (single methodological basis, universality, tuning simplicity, learning and programming et al) at creation and design of sensor systems with parallel input-output and processing for 2D structures hybrid and next generations neuro-fuzzy neurocomputers. We show design principles of programmable relational optoelectronic time-pulse encoded processors on the base of continuous logic, order logic and temporal waves processes. We consider a structure that execute analog signal extraction, analog and time-pulse coded variables sorting. We offer optoelectronic realization of such base relational order logic element, that consists of time-pulse coded photoconverters (pulse-width and pulse-phase modulators) with direct and complementary outputs, sorting network on logical elements and programmable commutation blocks. We make technical parameters estimations of devices and processors on such base elements by simulation and experimental research: optical input signals power 0.2 - 20 uW, processing time 1 - 10 us, supply voltage 1 - 3 V, consumption power 10 - 100 uW, extended functional possibilities, learning possibilities. We discuss some aspects of possible rules and principles of learning and programmable tuning on required function, relational operation and realization of hardware blocks for modifications of such processors. We show that it is possible to create sorting machines, neural networks and hybrid data-processing systems with untraditional numerical systems and pictures operands on the basis of such quasiuniversal hardware simple blocks with flexible programmable tuning.

Ultra Low Power Datalogger

NASA Astrophysics Data System (ADS)

Holik, Michael

2010-01-01

The article describes a design and the test of the datalogger unit. Main demands on the datalogger were to achieve the power consumption as low as possible and the ability to capture short-time events. The datalogger is based on a programmable logic device FPGA. VHDL language is used to design the architecture fitted into the FPGA. The results of the test confirmed low power consumption feature of the device as well as proper functionality of the unit.

A novel productivity-driven logic element for field-programmable devices

NASA Astrophysics Data System (ADS)

Marconi, Thomas; Bertels, Koen; Gaydadjiev, Georgi

2014-06-01

Although various techniques have been proposed for power reduction in field-programmable devices (FPDs), they are still all based on conventional logic elements (LEs). In the conventional LE, the output of the combinational logic (e.g. the look-up table (LUT) in many field-programmable gate arrays (FPGAs)) is connected to the input of the storage element; while the D flip-flop (DFF) is always clocked even when not necessary. Such unnecessary transitions waste power. To address this problem, we propose a novel productivity-driven LE with reduced number of transitions. The differences between our LE and the conventional LE are in the FFs-type used and the internal LE organisation. In our LEs, DFFs have been replaced by T flip-flops with the T input permanently connected to logic value 1. Instead of connecting the output of the combinational logic to the FF input, we use it as the FF clock. The proposed LE has been validated via Simulation Program with Integrated Circuit Emphasis (SPICE) simulations for a 45-nm Complementary Metal-Oxide-Semiconductor (CMOS) technology as well as via a real Computer-Aided Design (CAD) tools on a real FPGA using the standard Microelectronic Center of North Carolina (MCNC) benchmark circuits. The experimental results show that FPDs using our proposal not only have 48% lower total power but also run 17% faster than conventional FPDs on average.

Programmable Logic Controllers for Research on the Cyber Security of Industrial Power Plants

DTIC Science & Technology

2017-02-12

group . 15. SUBJECT TERMS Industrial control systems, cyber security 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF a. REPORT b. ABSTRACT c. THIS...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (00-MM-YYYY) ,2. REPORT TYPE 3. DATES COVERED...From- To) 12/02/2017 Final 15 August 2015 - 12 February 2017 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Programmable Logic Controllers for Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

"rsed" is an R package that contains tools for stream editing: manipulating text files by making insertions, replacements, deletions, substitutions, or commenting. It hails from the powerful Unix command, "sed". While the "rsed" package is not nearly as powerful as "see", it is much simpler to use. R programmers often write scripts that may require simple manipulation of text files. "rsed" addresses that need.

Neovascularity in patellar tendinopathy and the response to eccentric training: a case report using Power Doppler ultrasound.

PubMed

McCreesh, Karen M; Riley, Sara J; Crotty, James M

2013-12-01

This report describes the case of an amateur soccer player with chronic patellar tendinopathy who underwent ultrasound imaging before and after engaging in an 8-week programme of eccentric exercise. On initial assessment, greyscale ultrasound imaging demonstrated tendon thickening and reduced echogenicity, while Power Doppler imaging demonstrated a large amount of neovascularity. After 8 weeks of an eccentric loading programme, the patient reported significantly improved symptoms and functional scores, while follow-up imaging demonstrated improvement in the echo appearance of the tendon and complete resolution of the neovascularity. The association between neovascularity and symptoms in tendinopathy research is conflicting, with a paucity of research in the area of patellar tendinopathy. While further research is needed to clarify the significance of greyscale and Power Doppler ultrasound changes in relation to symptoms in patellar tendinopathy, ultrasound imaging was shown to be a useful adjunct to diagnosis and outcome assessment in this case. Copyright © 2012 Elsevier Ltd. All rights reserved.

Programmable controlled mode-locked fiber laser using a digital micromirror device.

PubMed

Liu, Wu; Fan, Jintao; Xie, Chen; Song, Youjian; Gu, Chenlin; Chai, Lu; Wang, Chingyue; Hu, Minglie

2017-05-15

A digital micromirror device (DMD)-based arbitrary spectrum amplitude shaper is incorporated into a large-mode-area photonic crystal fiber laser cavity. The shaper acts as an in-cavity programmable filter and provides large tunable dispersion from normal to anomalous. As a result, mode-locking is achieved in different dispersion regimes with watt-level high output power. By programming different filter profiles on the DMD, the laser generates femtosecond pulse with a tunable central wavelength and controllable bandwidth. Under conditions of suitable cavity dispersion and pump power, design-shaped spectra are directly obtained by varying the amplitude transfer function of the filter. The results show the versatility of the DMD-based in-cavity filter for flexible control of the pulse dynamics in a mode-locked fiber laser.

In-training assessment: qualitative study of effects on supervision and feedback in an undergraduate clinical rotation.

PubMed

Daelmans, H E M; Overmeer, R M; van der Hem-Stokroos, H H; Scherpbier, A J J A; Stehouwer, C D A; van der Vleuten, C P M

2006-01-01

Supervision and feedback are essential factors that contribute to the learning environment in the context of workplace learning and their frequency and quality can be improved. Assessment is a powerful tool with which to influence students' learning and supervisors' teaching and thus the learning environment. To investigate an in-training assessment (ITA) programme in action and to explore its effects on supervision and feedback. A qualitative study using individual, semistructured interviews. Eight students and 17 assessors (9 members of staff and 8 residents) in the internal medicine undergraduate clerkship at Vrije Universiteit Medical Centre, Amsterdam, the Netherlands. The ITA programme in action differed from the intended programme. Assessors provided hardly any follow-up on supervision and feedback given during assessments. Although students wanted more supervision and feedback, they rarely asked for it. Students and assessors failed to integrate the whole range of competencies included in the ITA programme into their respective learning and supervision and feedback. When giving feedback, assessors rarely gave borderline or fail judgements. If an ITA programme in action is to be congruent with the intended programme, the implementation of the programme must be monitored. It is also necessary to provide full information about the programme and to ensure this information is given repeatedly. Introducing an ITA programme that includes the assessment of several competencies does not automatically lead to more attention being paid to these competencies in terms of supervision and feedback. Measures that facilitate change in the learning environment seem to be a prerequisite for enabling the assessment programme to steer the learning environment.

pH-programmable DNA logic arrays powered by modular DNAzyme libraries.

PubMed

Elbaz, Johann; Wang, Fuan; Remacle, Francoise; Willner, Itamar

2012-12-12

Nature performs complex information processing circuits, such the programmed transformations of versatile stem cells into targeted functional cells. Man-made molecular circuits are, however, unable to mimic such sophisticated biomachineries. To reach these goals, it is essential to construct programmable modular components that can be triggered by environmental stimuli to perform different logic circuits. We report on the unprecedented design of artificial pH-programmable DNA logic arrays, constructed by modular libraries of Mg(2+)- and UO(2)(2+)-dependent DNAzyme subunits and their substrates. By the appropriate modular design of the DNA computation units, pH-programmable logic arrays of various complexities are realized, and the arrays can be erased, reused, and/or reprogrammed. Such systems may be implemented in the near future for nanomedical applications by pH-controlled regulation of cellular functions or may be used to control biotransformations stimulated by bacteria.

Success of non-traditional students in an undergraduate occupational therapy programme.

PubMed

Wheeler, NEIL

2001-01-01

An exit survey designed to examine the experiences of occupational therapy undergraduates was administered to 365 students in a four-year honours programme. The survey had a response rate of 51% (186). The survey was informed and supplemented by focus groups with international students and computer-mediated conferencing with community leaders from relevant ethnic minorities. Results showed that older students and those with non-traditional entry qualifications in this sample were as successful as school-leaver entrants (those with UK A Level qualifications). There were no significant differences between the support needs of the groups and previous experience did not have a beneficial or significant effect on support needs. Having to maintain part-time employment significantly increased the likelihood that students would consider withdrawing from the programme. For those who considered withdrawing but who went on to successful completion, the desire to practise occupational therapy following their successful experiences in the programme was a powerful motivator.

Parallelizing Compiler Framework and API for Power Reduction and Software Productivity of Real-Time Heterogeneous Multicores

NASA Astrophysics Data System (ADS)

Hayashi, Akihiro; Wada, Yasutaka; Watanabe, Takeshi; Sekiguchi, Takeshi; Mase, Masayoshi; Shirako, Jun; Kimura, Keiji; Kasahara, Hironori

Heterogeneous multicores have been attracting much attention to attain high performance keeping power consumption low in wide spread of areas. However, heterogeneous multicores force programmers very difficult programming. The long application program development period lowers product competitiveness. In order to overcome such a situation, this paper proposes a compilation framework which bridges a gap between programmers and heterogeneous multicores. In particular, this paper describes the compilation framework based on OSCAR compiler. It realizes coarse grain task parallel processing, data transfer using a DMA controller, power reduction control from user programs with DVFS and clock gating on various heterogeneous multicores from different vendors. This paper also evaluates processing performance and the power reduction by the proposed framework on a newly developed 15 core heterogeneous multicore chip named RP-X integrating 8 general purpose processor cores and 3 types of accelerator cores which was developed by Renesas Electronics, Hitachi, Tokyo Institute of Technology and Waseda University. The framework attains speedups up to 32x for an optical flow program with eight general purpose processor cores and four DRP(Dynamically Reconfigurable Processor) accelerator cores against sequential execution by a single processor core and 80% of power reduction for the real-time AAC encoding.

Novel Programmable Shape Memory Polystyrene Film: A Thermally Induced Beam-power Splitter.

PubMed

Li, Peng; Han, Yu; Wang, Wenxin; Liu, Yanju; Jin, Peng; Leng, Jinsong

2017-03-09

Micro/nanophotonic structures that are capable of optical wave-front shaping are implemented in optical waveguides and passive optical devices to alter the phase of the light propagating through them. The beam division directions and beam power distribution depend on the design of the micro/nanostructures. The ultimate potential of advanced micro/nanophotonic structures is limited by their structurally rigid, functional singleness and not tunable against external impact. Here, we propose a thermally induced optical beam-power splitter concept based on a shape memory polystyrene film with programmable micropatterns. The smooth film exhibits excellent transparency with a transmittance of 95% in the visible spectrum and optical stability during a continuous heating process up to 90 °C. By patterning double sided shape memory polystyrene film into erasable and switchable micro-groove gratings, the transmission light switches from one designed light divided directions and beam-power distribution to another because of the optical diffraction effect of the shape changing micro gratings during the whole thermal activated recovery process. The experimental and theoretical results demonstrate a proof-of-principle of the beam-power splitter. Our results can be adapted to further extend the applications of micro/nanophotonic devices and implement new features in the nanophotonics.

Novel Programmable Shape Memory Polystyrene Film: A Thermally Induced Beam-power Splitter

PubMed Central

Li, Peng; Han, Yu; Wang, Wenxin; Liu, Yanju; Jin, Peng; Leng, Jinsong

2017-01-01

Micro/nanophotonic structures that are capable of optical wave-front shaping are implemented in optical waveguides and passive optical devices to alter the phase of the light propagating through them. The beam division directions and beam power distribution depend on the design of the micro/nanostructures. The ultimate potential of advanced micro/nanophotonic structures is limited by their structurally rigid, functional singleness and not tunable against external impact. Here, we propose a thermally induced optical beam-power splitter concept based on a shape memory polystyrene film with programmable micropatterns. The smooth film exhibits excellent transparency with a transmittance of 95% in the visible spectrum and optical stability during a continuous heating process up to 90 °C. By patterning double sided shape memory polystyrene film into erasable and switchable micro-groove gratings, the transmission light switches from one designed light divided directions and beam-power distribution to another because of the optical diffraction effect of the shape changing micro gratings during the whole thermal activated recovery process. The experimental and theoretical results demonstrate a proof-of-principle of the beam-power splitter. Our results can be adapted to further extend the applications of micro/nanophotonic devices and implement new features in the nanophotonics. PMID:28276500

The effect of exercise repetition on the frequency characteristics of motor output force: implications for Achilles tendinopathy rehabilitation.

PubMed

Grigg, Nicole L; Wearing, Scott C; O'Toole, John M; Smeathers, James E

2014-01-01

To investigate the frequency characteristics of the ground reaction force (GRF) recorded throughout the eccentric Achilles tendon rehabilitation programme described by Alfredson. Controlled laboratory study, longitudinal. Nine healthy adult males performed six sets (15 repetitions per set) of eccentric ankle exercise. Ground reaction force was recorded throughout the exercise protocol. For each exercise repetition the frequency power spectrum of the resultant ground reaction force was calculated and normalised to total power. The magnitude of peak relative power within the 8-12 Hz bandwidth and the frequency at which this peak occurred was determined. The magnitude of peak relative power within the 8-12 Hz bandwidth increased with each successive exercise set and following the 4th set (60 repetitions) of exercise the frequency at which peak relative power occurred shifted from 9 to 10 Hz. The increase in magnitude and frequency of ground reaction force vibrations with an increasing number of exercise repetitions is likely connected to changes in muscle activation with fatigue and tendon conditioning. This research illustrates the potential for the number of exercise repetitions performed to influence the tendons' mechanical environment, with implications for tendon remodelling and the clinical efficacy of eccentric rehabilitation programmes for Achilles tendinopathy. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Novel Programmable Shape Memory Polystyrene Film: A Thermally Induced Beam-power Splitter

NASA Astrophysics Data System (ADS)

Li, Peng; Han, Yu; Wang, Wenxin; Liu, Yanju; Jin, Peng; Leng, Jinsong

2017-03-01

Micro/nanophotonic structures that are capable of optical wave-front shaping are implemented in optical waveguides and passive optical devices to alter the phase of the light propagating through them. The beam division directions and beam power distribution depend on the design of the micro/nanostructures. The ultimate potential of advanced micro/nanophotonic structures is limited by their structurally rigid, functional singleness and not tunable against external impact. Here, we propose a thermally induced optical beam-power splitter concept based on a shape memory polystyrene film with programmable micropatterns. The smooth film exhibits excellent transparency with a transmittance of 95% in the visible spectrum and optical stability during a continuous heating process up to 90 °C. By patterning double sided shape memory polystyrene film into erasable and switchable micro-groove gratings, the transmission light switches from one designed light divided directions and beam-power distribution to another because of the optical diffraction effect of the shape changing micro gratings during the whole thermal activated recovery process. The experimental and theoretical results demonstrate a proof-of-principle of the beam-power splitter. Our results can be adapted to further extend the applications of micro/nanophotonic devices and implement new features in the nanophotonics.

Low Power S-Box Architecture for AES Algorithm using Programmable Second Order Reversible Cellular Automata: An Application to WBAN.

PubMed

Gangadari, Bhoopal Rao; Ahamed, Shaik Rafi

2016-12-01

In this paper, we presented a novel approach of low energy consumption architecture of S-Box used in Advanced Encryption Standard (AES) algorithm using programmable second order reversible cellular automata (RCA 2 ). The architecture entails a low power implementation with minimal delay overhead and the performance of proposed RCA 2 based S-Box in terms of security is evaluated using the cryptographic properties such as nonlinearity, correlation immunity bias, strict avalanche criteria, entropy and also found that the proposed architecture is secure enough for cryptographic applications. Moreover, the proposed AES algorithm architecture simulation studies show that energy consumption of 68.726 nJ, power dissipation of 3.856 mW for 0.18- μm at 13.69 MHz and energy consumption of 29.408 nJ, power dissipation of 1.65 mW for 0.13- μm at 13.69 MHz. The proposed AES algorithm with RCA 2 based S-Box shows a reduction power consumption by 50 % and energy consumption by 5 % compared to best classical S-Box and composite field arithmetic based AES algorithm. Apart from that, it is also shown that RCA 2 based S-Boxes are dynamic in nature, invertible, low power dissipation compared to that of LUT based S-Box and hence suitable for Wireless Body Area Network (WBAN) applications.

Starting Circuit For Erasable Programmable Logic Device

NASA Technical Reports Server (NTRS)

Cole, Steven W.

1990-01-01

Voltage regulator bypassed to supply starting current. Starting or "pullup" circuit supplies large inrush of current required by erasable programmable logic device (EPLD) while being turned on. Operates only during such intervals of high demand for current and has little effect any other time. Performs needed bypass, acting as current-dependent shunt connecting battery or other source of power more nearly directly to EPLD. Input capacitor of regulator removed when starting circuit installed, reducing probability of damage to transistor in event of short circuit in or across load.

Optically-programmable nonlinear photonic component for dielectric-loaded plasmonic circuitry.

PubMed

Krasavin, Alexey V; Randhawa, Sukanya; Bouillard, Jean-Sebastien; Renger, Jan; Quidant, Romain; Zayats, Anatoly V

2011-12-05

We demonstrate both experimentally and numerically a compact and efficient, optically tuneable plasmonic component utilizing a surface plasmon polariton ring resonator with nonlinearity based on trans-cis isomerization in a polymer material. We observe more than 3-fold change between high and low transmission states of the device at milliwatt control powers (∼100 W/cm² by intensity), with the performance limited by switching speed of the material. Such plasmonic components can be employed in optically programmable and reconfigurable integrated photonic circuitry.

Program manual for the Shuttle Electric Power System analysis computer program (SEPS), volume 1 of program documentation

NASA Technical Reports Server (NTRS)

Bains, R. W.; Herwig, H. A.; Luedeman, J. K.; Torina, E. M.

1974-01-01

The Shuttle Electric Power System (SEPS) computer program is considered in terms of the program manual, programmer guide, and program utilization. The main objective is to provide the information necessary to interpret and use the routines comprising the SEPS program. Subroutine descriptions including the name, purpose, method, variable definitions, and logic flow are presented.

The Power, and Dilemma, of Honesty: Action Learning for Social Entrepreneurs

ERIC Educational Resources Information Center

Weinstein, Krystyna

2005-01-01

This is an account of one particular set meeting during a year long programme for social entrepreneurs. It triggered a number of questions and insights for me about the amazing value of honesty, and its power. It released a great deal of energy, ownership and "control". I realized how important it was to highlight, discuss and reflect on…

Robust media processing on programmable power-constrained systems

NASA Astrophysics Data System (ADS)

McVeigh, Jeff

2005-03-01

To achieve consumer-level quality, media systems must process continuous streams of audio and video data while maintaining exacting tolerances on sampling rate, jitter, synchronization, and latency. While it is relatively straightforward to design fixed-function hardware implementations to satisfy worst-case conditions, there is a growing trend to utilize programmable multi-tasking solutions for media applications. The flexibility of these systems enables support for multiple current and future media formats, which can reduce design costs and time-to-market. This paper provides practical engineering solutions to achieve robust media processing on such systems, with specific attention given to power-constrained platforms. The techniques covered in this article utilize the fundamental concepts of algorithm and software optimization, software/hardware partitioning, stream buffering, hierarchical prioritization, and system resource and power management. A novel enhancement to dynamically adjust processor voltage and frequency based on buffer fullness to reduce system power consumption is examined in detail. The application of these techniques is provided in a case study of a portable video player implementation based on a general-purpose processor running a non real-time operating system that achieves robust playback of synchronized H.264 video and MP3 audio from local storage and streaming over 802.11.

Effects of a salsa dance training on balance and strength performance in older adults.

PubMed

Granacher, Urs; Muehlbauer, Thomas; Bridenbaugh, Stephanie A; Wolf, Madeleine; Roth, Ralf; Gschwind, Yves; Wolf, Irene; Mata, Rui; Kressig, Reto W

2012-01-01

Deficits in static and particularly dynamic postural control and force production have frequently been associated with an increased risk of falling in older adults. The objectives of this study were to investigate the effects of salsa dancing on measures of static/dynamic postural control and leg extensor power in seniors. Twenty-eight healthy older adults were randomly assigned to an intervention group (INT, n = 14, age 71.6 ± 5.3 years) to conduct an 8-week progressive salsa dancing programme or a control group (CON, n = 14, age 68.9 ± 4.7 years). Static postural control was measured during one-legged stance on a balance platform and dynamic postural control was obtained while walking on an instrumented walkway. Leg extensor power was assessed during a countermovement jump on a force plate. Programme compliance was excellent with participants of the INT group completing 92.5% of the dancing sessions. A tendency towards an improvement in the selected measures of static postural control was observed in the INT group as compared to the CON group. Significant group × test interactions were found for stride velocity, length and time. Post hoc analyses revealed significant increases in stride velocity and length, and concomitant decreases in stride time. However, salsa dancing did not have significant effects on various measures of gait variability and leg extensor power. Salsa proved to be a safe and feasible exercise programme for older adults accompanied with a high adherence rate. Age-related deficits in measures of static and particularly dynamic postural control can be mitigated by salsa dancing in older adults. High physical activity and fitness/mobility levels of our participants could be responsible for the nonsignificant findings in gait variability and leg extensor power. Copyright © 2012 S. Karger AG, Basel.

Advanced Data Acquisition Systems

NASA Technical Reports Server (NTRS)

Perotti, J.

2003-01-01

Current and future requirements of the aerospace sensors and transducers field make it necessary for the design and development of new data acquisition devices and instrumentation systems. New designs are sought to incorporate self-health, self-calibrating, self-repair capabilities, allowing greater measurement reliability and extended calibration cycles. With the addition of power management schemes, state-of-the-art data acquisition systems allow data to be processed and presented to the users with increased efficiency and accuracy. The design architecture presented in this paper displays an innovative approach to data acquisition systems. The design incorporates: electronic health self-check, device/system self-calibration, electronics and function self-repair, failure detection and prediction, and power management (reduced power consumption). These requirements are driven by the aerospace industry need to reduce operations and maintenance costs, to accelerate processing time and to provide reliable hardware with minimum costs. The project's design architecture incorporates some commercially available components identified during the market research investigation like: Field Programmable Gate Arrays (FPGA) Programmable Analog Integrated Circuits (PAC IC) and Field Programmable Analog Arrays (FPAA); Digital Signal Processing (DSP) electronic/system control and investigation of specific characteristics found in technologies like: Electronic Component Mean Time Between Failure (MTBF); and Radiation Hardened Component Availability. There are three main sections discussed in the design architecture presented in this document. They are the following: (a) Analog Signal Module Section, (b) Digital Signal/Control Module Section and (c) Power Management Module Section. These sections are discussed in detail in the following pages. This approach to data acquisition systems has resulted in the assignment of patent rights to Kennedy Space Center under U.S. patent # 6,462,684. Furthermore, NASA KSC commercialization office has issued licensing rights to Circuit Avenue Netrepreneurs, LLC , a minority-owned business founded in 1999 located in Camden, NJ.

Space Nuclear Power and Propulsion - a basic Tool for the manned Exploration of the Solar System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frischauf, Norbert; Hamilton, Booz Allen

2004-07-01

Humanity has started to explore space more than 40 years ago. Numerous spacecraft have left the Earth in this endeavour, but while unmanned spacecraft were already sent out on missions, where they would eventually reach the outer limits of the Solar System, manned exploration has always been confined to the tiny bubble of the Earth's gravitational well, stretching out at maximum to our closest celestial companion - the Moon - during the era of the Apollo programme in the late 60's and early 70's. When mankind made its giant leap, the exploration of our cosmic neighbour was seen as themore » initial step for the manned exploration of the whole Solar System. Consequently ambitious research and development programmes were undertaken at that time to enable what seemed to be the next logical steps: the establishment of a permanent settled base on the Moon and the first manned mission to Mars in the 80's. Nuclear space power and propulsion played an important role in these entire future scenarios, hence ambitious development programmes were undertaken to make these technologies available. Unfortunately the 70's-paradigm shift in space policies did not only bring an end to the Apollo programme, but it also brought a complete halt to all of these technology programmes and confined the human presence in space to a tiny bubble including nothing more than the Earth's sphere and a mere shell of a few hundred kilometres of altitude, too small to even include the Moon. Today, after more than three decades, manned exploration of the Solar System has become an issue again and so are missions to Moon and Mars. However, studies and analyses show that all of these future plans are hampered by today's available propulsion systems and by the problematic of solar power generation at distances at and beyond of Mars, a problem, however, that can readily be solved by the utilisation of space nuclear reactors and propulsion systems. This paper intends to provide an overview on the various fission- and fusion-based Nuclear Power and Propulsion system concepts and tries to compare these systems' different working principles and technical implementations with each other. The overview and comparison will be complemented by a closer look at ongoing activities related to research and development in this area and by an outlook on what kind of systems might be employed to carry the first astronauts to Mars and beyond. (autho0008.« less

Programmable Logic Application Notes

NASA Technical Reports Server (NTRS)

Katz, Richard

2000-01-01

This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter will continue a series of notes concentrating on analysis techniques with this issue's section discussing: Digital Timing Analysis Tools and Techniques. Articles in this issue include: SX and SX-A Series Devices Power Sequencing; JTAG and SXISX-AISX-S Series Devices; Analysis Techniques (i.e., notes on digital timing analysis tools and techniques); Status of the Radiation Hard reconfigurable Field Programmable Gate Array Program, Input Transition Times; Apollo Guidance Computer Logic Study; RT54SX32S Prototype Data Sets; A54SX32A - 0.22 micron/UMC Test Results; Ramtron FM1608 FRAM; and Analysis of VHDL Code and Synthesizer Output.

Proceedings of the Annual Conference on Ada (Trademark) Technology (2nd) Held at Hampton, Virginia on March 27, 28, 1984.

DTIC Science & Technology

1984-03-01

evaluation of powerful support environments are essential if we are to maximize Lanauage Definition the productivity of programmers. CENVTACS provided...quality Policy and Objectives Ada support environment which includes a rich set of powerful tools (in addition to a compiler) The DOD has established Ada...to be easy to learn and easy to use. It will be powerful , efficient, and The MAPSE Command Language (MCL) friendly. This paper describes how these

A reconfigurable medically cohesive biomedical front-end with ΣΔ ADC in 0.18µm CMOS.

PubMed

Jha, Pankaj; Patra, Pravanjan; Naik, Jairaj; Acharya, Amit; Rajalakshmi, P; Singh, Shiv Govind; Dutta, Ashudeb

2015-08-01

This paper presents a generic programmable analog front-end (AFE) for acquisition and digitization of various biopotential signals. This includes a lead-off detection circuit, an ultra-low current capacitively coupled signal conditioning stage with programmable gain and bandwidth, a new mixed signal automatic gain control (AGC) mechanism and a medically cohesive reconfigurable ΣΔ ADC. The full system is designed in UMC 0.18μm CMOS. The AFE achieves an overall linearity of more 10 bits with 0.47μW power consumption. The ADC provides 2(nd) order noise-shaping while using single integrator and an ENOB of ~11 bits with 5μW power consumption. The system was successfully verified for various ECG signals from PTB database. This system is intended for portable batteryless u-Healthcare devices.

New Insights into the Management of Hypertension and Cardiovascular Risk with Angiotensin Receptor Blockers: Observational Studies Help Us?

PubMed Central

Goudev, Assen

2014-01-01

Post-marketing observational studies are valuable for establishing the real-world effectiveness of treatment regimens in routine clinical practice as they typically monitor a diverse population of patients over many months. This article reviews recent observational studies of angiotensin receptor blockers (ARBs) for the management of hypertension: the 6-month eprosartan POWER study (n~29,400), the 3-month valsartan translational research programme (n~19,500), the 9-month irbesartan Treat to Target study (n=14,200), the 6-month irbesartan DO-IT survey (n~3300) and the 12-week candesartan CHILI survey programme (n=4600). Reduction in blood pressure with ARBs reported across these studies appears to be comparable for the different agents, although direct comparisons between studies cannot be made owing to different treatment durations and baseline patient demographics. Of these studies, the eprosartan POWER study, 2 of the 7 studies in the valsartan translational research programme, and the candesartan CHILI Triple T study measured total cardiovascular risk, as recommended in the 2013 European Society of Cardiology-European Society of Hypertension guidelines. The POWER study confirmed the value of the Systemic Coronary Risk Evaluation (SCORE) to accurately assess total cardiovascular risk. With the advent of new healthcare practices, such as the use of electronic health records (EHRs), observational studies in larger patient populations will become possible. In the future, algorithms embedded in EHR systems could evolve as decision support tools to inform on patient care. PMID:24847388

A tangled weave: Tracing outcomes of education in rural women's lives in North India

NASA Astrophysics Data System (ADS)

Ghose, Malini; Mullick, Disha

2015-06-01

This paper is based on the findings of a research study which traced 56 rural women learners 15 years after they had participated in an empowerment and education programme in North India. It attempts to understand, from the perspectives of women from marginalised communities, the ways in which participating in the programme had been empowering for them, or not. While most of the women were indeed able to transform several areas in their lives, this study illustrates that empowering outcomes cannot be assumed or articulated in categorical terms and that bringing about change requires the negotiation of power at various levels. The women's narratives stand in contrast to the prevalent discourses around women's literacy and empowerment, which highlight the importance of literacy only in terms of its positive impact on attaining development goals. Despite the vigorously discussed de-politicisation of the concept of empowerment, the authors show in this paper that empowerment, when informed by a critical feminist understanding, continues to provide a useful framework to analyse women's experiences related to education, as a process enabling women to understand and negotiate structures of power - which are neither static nor wholly dominating - and to find spaces to exercise agency. There are few longitudinal studies which trace the long-term impact of educational programmes on adult women, and most studies are in the nature of impact assessments of programmes. Through this paper the authors argue for the need to analyse the complexities around the relationship between women's education and empowerment.

A Low Power Linear Phase Programmable Long Delay Circuit.

PubMed

Rodriguez-Villegas, Esther; Logesparan, Lojini; Casson, Alexander J

2014-06-01

A novel linear phase programmable delay is being proposed and implemented in a 0.35 μm CMOS process. The delay line consists of N cascaded cells, each of which delays the input signal by Td/N, where Td is the total line delay. The delay generated by each cell is programmable by changing a clock frequency and is also fully independent of the frequency of the input signal. The total delay hence depends only on the chosen clock frequency and the total number of cascaded cells. The minimum clock frequency is limited by the maximum time a voltage signal can effectively be held by an individual cell. The maximum number of cascaded cells will be limited by the effects of accumulated offset due to transistor mismatch, which eventually will affect the operating mode of the individual transistors in a cell. This latter limitation has however been dealt with in the topology by having an offset compensation mechanism that makes possible having a large number of cascaded cells and hence a long resulting delay. The delay line has been designed for scalp-based neural activity analysis that is predominantly in the sub-100 Hz frequency range. For these signals, the delay generated by a 31-cell cascade has been demonstrated to be programmable from 30 ms to 3 s. Measurement results demonstrate a 31 stage, 50 Hz bandwidth, 0.3 s delay that operates from a 1.1 V supply with power consumption of 270 nW.

South Africa and the 21st Century Power Partnership (Fact Sheet). 21st Century Power Partnership; 21st Century Power Partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Established in 2012, the 21CPP South Africa Programme is a global initiative that connects South African stakeholders with an international community of expertise. The overall goal of this program is to support South Africa’s power system transformation by accelerating the transition to a reliable, financially robust, and low-carbon power system. 21CPP activities focus on achieving positive outcomes for all participants, especially addressing critical questions and challenges facing system planners, regulators, and operators. In support of this goal, 21CPP taps into deep networks of expertise among leading industry practitioners.

Y2K: effects on pacemaker and implantable defibrillator programmers.

PubMed

Flynn, D P; Daubert, J P; Huang, D T; Ocampo, C M; O'Gorman, E

1999-01-01

All permanent pacemakers and implantable defibrillators (PPM/ICDs) will continue to function as programmed without regard to the date in the year 2000 (Y2K). All manufacturers contacted reassured us that some of these devices incorporate a day/year clock in the circuitry; however, these are not involved in sensing or delivering programmed therapy. Some manufacturers' device programmers will roll over to the year 2000 without any problems at all, whereas others may have difficulty with date and time stamping on printed reports. We tested 14 different types of PPM/ICD programmers for Y2K compliance using 8 tests. Five of the 14 models passed each test and were labeled at our institution with a green "Y2K" sticker to identify them as Y2K compatible and needing no special attention after December 31, 1999. The most common test failed was the ability to roll the date forward from December 31, 1999, with the programmer power off. Organizations should consider testing and replacing noncompliant device programmers or placing a red sticker with "Y2K" crossed out on noncompliant pieces. The red sticker alerts the advanced practice nurse or physician to the need to confirm the appropriate date and time in the programmer after startup in the year 2000 and before interrogating or programming any PPM/ICD, to avoid inappropriate date and time stamping on printed reports from that programmer.

Louder than words: power and conflict in interprofessional education articles, 1954–2013

PubMed Central

Paradis, Elise; Whitehead, Cynthia R

2015-01-01

Context Interprofessional education (IPE) aspires to enable collaborative practice. Current IPE offerings, although rapidly proliferating, lack evidence of efficacy and theoretical grounding. Objectives Our research aimed to explore the historical emergence of the field of IPE and to analyse the positioning of this academic field of inquiry. In particular, we sought to investigate the extent to which power and conflict – elements central to interprofessional care – figure in the IPE literature. Methods We used a combination of deductive and inductive automated coding and manual coding to explore the contents of 2191 articles in the IPE literature published between 1954 and 2013. Inductive coding focused on the presence and use of the sociological (rather than statistical) version of power, which refers to hierarchies and asymmetries among the professions. Articles found to be centrally about power were then analysed using content analysis. Results Publications on IPE have grown exponentially in the past decade. Deductive coding of identified articles showed an emphasis on students, learning, programmes and practice. Automated inductive coding of titles and abstracts identified 129 articles potentially about power, but manual coding found that only six articles put power and conflict at the centre. Content analysis of these six articles revealed that two provided tentative explorations of power dynamics, one skirted around this issue, and three explicitly theorised and integrated power and conflict. Conclusions The lack of attention to power and conflict in the IPE literature suggests that many educators do not foreground these issues. Education programmes are expected to transform individuals into effective collaborators, without heed to structural, organisational and institutional factors. In so doing, current constructions of IPE veil the problems that IPE attempts to solve. PMID:25800300

Louder than words: power and conflict in interprofessional education articles, 1954-2013.

PubMed

Paradis, Elise; Whitehead, Cynthia R

2015-04-01

Interprofessional education (IPE) aspires to enable collaborative practice. Current IPE offerings, although rapidly proliferating, lack evidence of efficacy and theoretical grounding. Our research aimed to explore the historical emergence of the field of IPE and to analyse the positioning of this academic field of inquiry. In particular, we sought to investigate the extent to which power and conflict - elements central to interprofessional care - figure in the IPE literature. We used a combination of deductive and inductive automated coding and manual coding to explore the contents of 2191 articles in the IPE literature published between 1954 and 2013. Inductive coding focused on the presence and use of the sociological (rather than statistical) version of power, which refers to hierarchies and asymmetries among the professions. Articles found to be centrally about power were then analysed using content analysis. Publications on IPE have grown exponentially in the past decade. Deductive coding of identified articles showed an emphasis on students, learning, programmes and practice. Automated inductive coding of titles and abstracts identified 129 articles potentially about power, but manual coding found that only six articles put power and conflict at the centre. Content analysis of these six articles revealed that two provided tentative explorations of power dynamics, one skirted around this issue, and three explicitly theorised and integrated power and conflict. The lack of attention to power and conflict in the IPE literature suggests that many educators do not foreground these issues. Education programmes are expected to transform individuals into effective collaborators, without heed to structural, organisational and institutional factors. In so doing, current constructions of IPE veil the problems that IPE attempts to solve. © 2015 The Authors Medical Education Published by John Wiley & Sons Ltd.

Step-by-Step Design of an FPGA-Based Digital Compensator for DC/DC Converters Oriented to an Introductory Course

ERIC Educational Resources Information Center

Zumel, P.; Fernandez, C.; Sanz, M.; Lazaro, A.; Barrado, A.

2011-01-01

In this paper, a short introductory course to introduce field-programmable gate array (FPGA)-based digital control of dc/dc switching power converters is presented. Digital control based on specific hardware has been at the leading edge of low-medium power dc/dc switching converters in recent years. Besides industry's interest in this topic, from…

Electronics for a focal plane crystal spectrometer

NASA Technical Reports Server (NTRS)

Goeke, R. F.

1978-01-01

The HEAO-B program forced the usual constraints upon the spacecraft experiment electronics: high reliability, low power consumption, and tight packaging at reasonable cost. The programmable high voltage power supplies were unique in both application and simplicity of manufacture. The hybridized measurement chain is a modification of that used on the SAS-C program; the charge amplifier design in particular shows definite improvement in performance over previous work.

High performance digital read out integrated circuit (DROIC) for infrared imaging

NASA Astrophysics Data System (ADS)

Mizuno, Genki; Olah, Robert; Oduor, Patrick; Dutta, Achyut K.; Dhar, Nibir K.

2016-05-01

Banpil Photonics has developed a high-performance Digital Read-Out Integrated Circuit (DROIC) for image sensors and camera systems targeting various military, industrial and commercial Infrared (IR) imaging applications. The on-chip digitization of the pixel output eliminates the necessity for an external analog-to-digital converter (ADC), which not only cuts costs, but also enables miniaturization of packaging to achieve SWaP-C camera systems. In addition, the DROIC offers new opportunities for greater on-chip processing intelligence that are not possible in conventional analog ROICs prevalent today. Conventional ROICs, which typically can enhance only one high performance attribute such as frame rate, power consumption or noise level, fail when simultaneously targeting the most aggressive performance requirements demanded in imaging applications today. Additionally, scaling analog readout circuits to meet such requirements leads to expensive, high-power consumption with large and complex systems that are untenable in the trend towards SWaP-C. We present the implementation of a VGA format (640x512 pixels 15μm pitch) capacitivetransimpedance amplifier (CTIA) DROIC architecture that incorporates a 12-bit ADC at the pixel level. The CTIA pixel input circuitry has two gain modes with programmable full-well capacity values of 100K e- and 500K e-. The DROIC has been developed with a system-on-chip architecture in mind, where all the timing and biasing are generated internally without requiring any critical external inputs. The chip is configurable with many parameters programmable through a serial programmable interface (SPI). It features a global shutter, low power, and high frame rates programmable from 30 up 500 frames per second in full VGA format supported through 24 LVDS outputs. This DROIC, suitable for hybridization with focal plane arrays (FPA) is ideal for high-performance uncooled camera applications ranging from near IR (NIR) and shortwave IR (SWIR) to mid-wave IR (MWIR) and long-wave IR (LWIR) spectral bands.

Implementation of health promotion programmes in schools: an approach to understand the influence of contextual factors on the process?

PubMed

Darlington, Emily Joan; Violon, Nolwenn; Jourdan, Didier

2018-01-22

Implementing complex and multi-level public health programmes is challenging in school settings. Discrepancies between expected and actual programme outcomes are often reported. Such discrepancies are due to complex interactions between contextual factors. Contextual factors relate to the setting, the community, in which implementation occurs, the stakeholders involved, and the characteristics of the programme itself. This work uses realist evaluation to understand how contextual factors influence the implementation process, to result in variable programme outcomes. This study focuses on identifying contextual factors, pinpointing combinations of contextual factors, and understanding interactions and effects of such factors and combinations on programme outcomes on different levels of the implementation process. Schools which had participated in a school-based health promotion programme between 2012 and 2015 were included. Two sets of qualitative data were collected: semi-structured interviews with school staff and programme coordinators; and written documents about the actions implemented in a selection of four schools. Quantitative data included 1553 questionnaires targeting pupils aged 8 to 11 in 14 schools to describe the different school contexts. The comparison between what was expected from the programme (programme theory) and the outcomes identified in the field data, showed that some of the mechanisms expected to support the implementation of the programme, did not operate as anticipated (e.g. inclusion of training, initiation by decision-maker). Key factors which influenced the implementation process included, amongst other factors, the mode of introduction of the programme, home/school relationship, leadership of the management team, and the level of delegated power. Five types of interactions between contextual factors were put forward: enabling, hindering, neutral, counterbalancing and moderating effects. Recurrent combinations of factors were identified. Implementation was more challenging in vulnerable schools where school climate was poor. A single programme cannot be suited or introduced in the same manner in every context. However, key recurrent combinations of contextual factors could contribute to the design of implementation patterns, which could provide guidelines and recommendation for grass-root programme implementation.

A distributed control system for the lower-hybrid current drive system on the Tokamak de Varennes

NASA Astrophysics Data System (ADS)

Bagdoo, J.; Guay, J. M.; Chaudron, G.-A.; Decoste, R.; Demers, Y.; Hubbard, A.

1990-08-01

An rf current drive system with an output power of 1 MW at 3.7 GHz is under development for the Tokamak de Varennes. The control system is based on an Ethernet local-area network of programmable logic controllers as front end, personal computers as consoles, and CAMAC-based DSP processors. The DSP processors ensure the PID control of the phase and rf power of each klystron, and the fast protection of high-power rf hardware, all within a 40 μs loop. Slower control and protection, event sequencing and the run-time database are provided by the programmable logic controllers, which communicate, via the LAN, with the consoles. The latter run a commercial process-control console software. The LAN protocol respects the first four layers of the ISO/OSI 802.3 standard. Synchronization with the tokamak control system is provided by commercially available CAMAC timing modules which trigger shot-related events and reference waveform generators. A detailed description of each subsystem and a performance evaluation of the system will be presented.

Improving participant selection in disease management programmes: insights gained from propensity score stratification.

PubMed

Linden, Ariel; Adams, John L

2008-10-01

While the randomized controlled trial (RCT) remains the gold-standard study design for evaluating treatment effect, outcomes researchers turn to powerful quasi-experimental designs when only observational studies can be conducted. Within these designs, propensity score matching is one of the most popular to evaluate disease management (DM) programme effectiveness. Given that DM programmes generally have a much smaller number of participants than non-participants in the population, propensity score matching will typically result in all or nearly all participants finding successful matches, while most of the non-participants in the population remain unmatched and thereby excluded from the analysis. By excluding data from the unmatched population, the effect of non-treatment in the remaining population with the disease is not captured. In the present study, we examine changes in hospitalization rates stratified by propensity score quintiles across the entire population allowing us to gain insight as to how well the programme chose its participants, or if the programme could have been effective on those individuals not explicitly targeted for the intervention. These data indicate the presence of regression to the mean, and suggest that the DM programme may be overly limited to only the highest strata when there is evidence of a potential benefit for those in all the lower strata as well.

Co-operation, participation and conflicts faced in public health--lessons learned from a long-term prevention programme in Sweden.

PubMed

Brännström, I; Emmelin, M; Dahlgren, L; Johansson, M; Wall, S

1994-09-01

A comprehensive community-based programme for prevention of cardiovascular diseases (CVD) and diabetes was established in 1985 in a small municipality in northern Sweden. A cross-sectional survey to the general public was performed and semi-structured open-ended interviews were taken of actors at different levels. Notes from official records were also included in the study. The aim was to describe and discuss some factors that promote or constrain community participation in health programmes. The results generally confirmed that the right of definition concerning the health programme mainly remained with the health professionals. Community participation was mainly defined by the actors based on the medical and health planning approach and, thereby, as a means to transform health policy plans into reality by transmitting health knowledge and increasing consciousness among the citizens of the need for changing lifestyles. However, participation as a means of identifying problems and demonstrating power relationships and as elements in promoting local democracy was hardly represented among the actors at all. Overall, the CVD health programme was characterized by consensus between the actors. Despite this, debates and arguments about interpretations, social interests, personal conflicts and ideological constraints were observed. However, a majority of the public wanted the CVD preventive programme to continue.

A programmable, multichannel power supply for SIPMs with temperature compensation loop and Ethernet interface

NASA Astrophysics Data System (ADS)

Querol, M.; Rodríguez, J.; Toledo, J.; Esteve, R.; Álvarez, V.; Herrero, V.

2016-12-01

Among the different techniques available, the SiPM power supply described in this paper uses output voltage and sensor temperature feedback. A high-resolution ADC digitizes both the output voltage and an analog signal proportional to the SiPM temperature for each of its 16 independent outputs. The appropriate change in the bias voltage is computed in a micro-controller and this correction is applied via a high resolution DAC to the control input of a DC/DC module that produces the output voltage. This method allows a reduction in gain variations from typically 30% to only 0.5% in a 10 °C range. The power supply is housed in a 3U-height aluminum box. A 2.8'' touch screen on the front panel provides local access to the configuration and monitoring functions using a graphical interface. The unit has an Ethernet interface on its rear side to provide remote operation and integration in slow control systems using the encrypted and secure SSH protocol. A LabVIEW application with SSH interface has been designed to operate the power supply from a remote computer. The power supply has good characteristics, such as 85 V output range with 1 mV resolution and stability better than 2 mVP, excellent output load regulation and programmable rise and fall voltage ramps. Commercial power supplies from well-known manufacturers can show far better specifications though can also result in an over featured and over costly solution for typical applications.

Sub-to super-ambient temperature programmable microfabricated gas chromatography column

DOEpatents

Robinson, Alex L.; Anderson, Lawrence F.

2004-03-16

A sub- to super-ambient temperature programmable microfabricated gas chromatography column enables more efficient chemical separation of chemical analytes in a gas mixture by combining a thermoelectric cooler and temperature sensing on the microfabricated column. Sub-ambient temperature programming enables the efficient separation of volatile organic compounds and super-ambient temperature programming enables the elution of less volatile analytes within a reasonable time. The small heat capacity and thermal isolation of the microfabricated column improves the thermal time response and power consumption, both important factors for portable microanalytical systems.

Programmable diffractive lens for ophthalmic application

NASA Astrophysics Data System (ADS)

Millán, María S.; Pérez-Cabré, Elisabet; Romero, Lenny A.; Ramírez, Natalia

2014-06-01

Pixelated liquid crystal displays have been widely used as spatial light modulators to implement programmable diffractive optical elements, particularly diffractive lenses. Many different applications of such components have been developed in information optics and optical processors that take advantage of their properties of great flexibility, easy and fast refreshment, and multiplexing capability in comparison with equivalent conventional refractive lenses. We explore the application of programmable diffractive lenses displayed on the pixelated screen of a liquid crystal on silicon spatial light modulator to ophthalmic optics. In particular, we consider the use of programmable diffractive lenses for the visual compensation of refractive errors (myopia, hypermetropia, astigmatism) and presbyopia. The principles of compensation are described and sketched using geometrical optics and paraxial ray tracing. For the proof of concept, a series of experiments with artificial eye in optical bench are conducted. We analyze the compensation precision in terms of optical power and compare the results with those obtained by means of conventional ophthalmic lenses. Practical considerations oriented to feasible applications are provided.

Ophthalmic compensation of visual ametropia based on a programmable diffractive lens

NASA Astrophysics Data System (ADS)

Millán, Maria S.; Pérez-Cabré, Elisabet; Romero, Lenny A.; Ramírez, Natalia

2013-11-01

Pixelated liquid crystal displays have been widely used as spatial light modulators to implement programmable diffractive optical elements (DOEs), particularly diffractive lenses. Many different applications of such components have been developed in information optics and optical processors that take advantage of their properties of great flexibility, easy and fast refreshment, and multiplexing capability in comparison with equivalent conventional refractive lenses. In this paper, we explore the application of programmable diffractive lenses displayed on the pixelated screen of a liquid crystal on silicon spatial light modulator (LCoS-SLM) to ophthalmic optics. In particular, we consider the use of programmable diffractive lenses for the visual compensation of some refractive errors (myopia, hyperopia). The theoretical principles of compensation are described and sketched using geometrical optics and paraxial ray tracing. A series of experiments with artificial eye in optical bench are conducted to analyze the compensation accuracy in terms of optical power and to compare the results with those obtained by means of conventional ophthalmic lenses. Practical considerations oriented to feasible applications are provided.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, Zheming; Yoshii, Kazutomo; Finkel, Hal

Open Computing Language (OpenCL) is a high-level language that enables software programmers to explore Field Programmable Gate Arrays (FPGAs) for application acceleration. The Intel FPGA software development kit (SDK) for OpenCL allows a user to specify applications at a high level and explore the performance of low-level hardware acceleration. In this report, we present the FPGA performance and power consumption results of the single-precision floating-point vector add OpenCL kernel using the Intel FPGA SDK for OpenCL on the Nallatech 385A FPGA board. The board features an Arria 10 FPGA. We evaluate the FPGA implementations using the compute unit duplication andmore » kernel vectorization optimization techniques. On the Nallatech 385A FPGA board, the maximum compute kernel bandwidth we achieve is 25.8 GB/s, approximately 76% of the peak memory bandwidth. The power consumption of the FPGA device when running the kernels ranges from 29W to 42W.« less

An FPGA-Based Test-Bed for Reliability and Endurance Characterization of Non-Volatile Memory

NASA Technical Reports Server (NTRS)

Rao, Vikram; Patel, Jagdish; Patel, Janak; Namkung, Jeffrey

2001-01-01

Memory technologies are divided into two categories. The first category, nonvolatile memories, are traditionally used in read-only or read-mostly applications because of limited write endurance and slow write speed. These memories are derivatives of read only memory (ROM) technology, which includes erasable programmable ROM (EPROM), electrically-erasable programmable ROM (EEPROM), Flash, and more recent ferroelectric non-volatile memory technology. Nonvolatile memories are able to retain data in the absence of power. The second category, volatile memories, are random access memory (RAM) devices including SRAM and DRAM. Writing to these memories is fast and write endurance is unlimited, so they are most often used to store data that change frequently, but they cannot store data in the absence of power. Nonvolatile memory technologies with better future potential are FRAM, Chalcogenide, GMRAM, Tunneling MRAM, and Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) EEPROM.

How can community health programmes build enabling environments for transformative communication? Experiences from India and South Africa.

PubMed

Campbell, Catherine; Cornish, Flora

2012-05-01

Much research has examined how to empower the poor to articulate demands for health-enabling living conditions. Less is known about creating receptive social environments where the powerful heed the voices of the poor. We explore the potential for 'transformative communication' between the poor and the powerful, through comparing two well-documented case studies of HIV/AIDS management. The Entabeni Project in South Africa sought to empower impoverished women to deliver home-based nursing to people with AIDS. It successfully provided short-term welfare, but did not achieve local leadership or sustainability. The Sonagachi Project in India, an HIV-prevention programme targeting female sex workers, became locally led and sustainable. We highlight the strategies through which Sonagachi, but not Entabeni, altered the material, symbolic and relational contexts of participants' lives, enabling transformative communication and opportunities for sexual health-enabling social change.

Introduction

NASA Astrophysics Data System (ADS)

Koper, Rob

In 2003 we started a new research programme at the Centre for Learning Sciences and Technologies (CELSTEC) that was aiming to help people to further develop their professional competences by using the innovative powers of new media, mobile devices, and modern Internet services. The idea behind the programme was to contribute to one of the bigger challenges in our society: how to deal with the growing complexity, the growing quantity and the permanent changes in knowledge and technologies. For companies this question relates to the core of their business: how to become innovative and stay competitive. For the employees, the ‘professionals’, this question relates directly to their jobs: how to become and stay employable. In this book we will concentrate on the last group, the professionals and their question how to stay employable, how to keep up-to-date and how to develop professional competence during their careers. The professionals represent the human capital, the knowledge, the innovative power in our economy.

Software systems for modeling articulated figures

NASA Technical Reports Server (NTRS)

Phillips, Cary B.

1989-01-01

Research in computer animation and simulation of human task performance requires sophisticated geometric modeling and user interface tools. The software for a research environment should present the programmer with a powerful but flexible substrate of facilities for displaying and manipulating geometric objects, yet insure that future tools have a consistent and friendly user interface. Jack is a system which provides a flexible and extensible programmer and user interface for displaying and manipulating complex geometric figures, particularly human figures in a 3D working environment. It is a basic software framework for high-performance Silicon Graphics IRIS workstations for modeling and manipulating geometric objects in a general but powerful way. It provides a consistent and user-friendly interface across various applications in computer animation and simulation of human task performance. Currently, Jack provides input and control for applications including lighting specification and image rendering, anthropometric modeling, figure positioning, inverse kinematics, dynamic simulation, and keyframe animation.

Long-term effect of the combined use of powered toothbrush and triclosan dentifrice in periodontal maintenance patients.

PubMed

Bogren, Anna; Teles, Ricardo P; Torresyap, Gay; Haffajee, Anne D; Socransky, Sigmund S; Jönsson, Kerstin; Wennström, Jan L

2008-02-01

To test the hypothesis of a superior clinical and microbiological effect of the combined use of powered toothbrush+triclosan-containing dentifrice compared with manual toothbrush+regular fluoride-containing dentifrice in periodontal maintenance patients. A total of 128 periodontitis subjects involved in recall programmes were randomized to use either powered toothbrush with triclosan-dentifrice (test) or manual toothbrush and standard dentifrice (control). Supportive periodontal treatment was provided at baseline and every 6 months. Plaque, bleeding on probing (BoP), probing pocket depth (PPD) and relative attachment level (RAL) were scored at baseline, 1, 2 and 3 years. Subgingival plaque samples were taken and analysed for their content of 40 bacterial species at each examination interval. All analyses were performed by "intention-to-treat" protocol. Both groups showed significant reduction in BoP, PPD and in mean total counts of the 40 bacterial species between baseline and 3 years, while plaque score and RAL remained almost unchanged. No significant differences between the two prevention programmes were found for any of the clinical outcome variables or in mean counts of the various bacterial species. The study failed to demonstrate superior clinical and microbiological effects of powered toothbrush+triclosan dentifrice compared with manual toothbrush+standard fluoride-dentifrice in periodontitis-susceptible patients on regular maintenance therapy.

Field application of smart SHM using field programmable gate array technology to monitor an RC bridge in New Mexico

NASA Astrophysics Data System (ADS)

Azarbayejani, M.; Jalalpour, M.; El-Osery, A. I.; Reda Taha, M. M.

2011-08-01

In this paper, an innovative field application of a structural health monitoring (SHM) system using field programmable gate array (FPGA) technology and wireless communication is presented. The new SHM system was installed to monitor a reinforced concrete (RC) bridge on Interstate 40 (I-40) in Tucumcari, New Mexico. This newly installed system allows continuous remote monitoring of this bridge using solar power. Details of the SHM component design and installation are discussed. The integration of FPGA and solar power technologies make it possible to remotely monitor infrastructure with limited access to power. Furthermore, the use of FPGA technology enables smart monitoring where data communication takes place on-need (when damage warning signs are met) and on-demand for periodic monitoring of the bridge. Such a system enables a significant cut in communication cost and power demands which are two challenges during SHM operation. Finally, a three-dimensional finite element (FE) model of the bridge was developed and calibrated using a static loading field test. This model is then used for simulating damage occurrence on the bridge. Using the proposed automation process for SHM will reduce human intervention significantly and can save millions of dollars currently spent on prescheduled inspection of critical infrastructure worldwide.

Nuclear Power: Is It a New Clear Choice for Malaysia

NASA Astrophysics Data System (ADS)

Besar, Idris B.

2008-05-01

Energy is essential for socio-economic development. Any nation's standard of living is closely related to its access to energy. To put into perspective, the per capita electricity consumptions in developed countries of the Organisation for Economic Cooperation and Development (OECD) is currently estimated at 8600 kilowatts-hour per year as compared to the consumption rates in Malaysia and some African countries of 3300 and 50 kilowatts-hour per year, respectively. Energy is therefore an important pre-requisite for achieving the Malaysian vision of becoming a developed nation by the year 2020, in that it is needed not only for industrialization programme but also in maintaining quality of life. In Malaysia, the main concern currently is still on the supply in term of adequacy, reliability and quality; and moving slowly but steadily towards security, sustainability, environmentally friendly and contribution to climate change. With this new dimension, nuclear power emerged as a good match to a possible alternative in the comprehensive national energy policy. Many studies presented the positive aspects of nuclear power while others indicated the bad sides and potential risks. This paper will highlight some of those pros and cons as well as the potential risks beside a discussion on relevant requirements for a nuclear power programme in particular those of interest to the professionals in the physical sciences.

System for energy harvesting and/or generation, storage, and delivery

NASA Technical Reports Server (NTRS)

DeGreeff, Jenniffer Leigh (Inventor); Trainor, John T. (Inventor); Fleig, Patrick Franz (Inventor); Lakeman, Charles D. E. (Inventor)

2011-01-01

A device and method for harvesting, generating, storing, and delivering energy to a load, particularly for remote or inaccessible applications. The device preferably comprises one or more energy sources, at least one supercapacitor, at least one rechargeable battery, and a controller. The charging of the energy storage devices and the delivery of power to the load is preferably dynamically varied to maximize efficiency. A low power consumption charge pump circuit is preferably employed to collect power from low power energy sources while also enabling the delivery of higher voltage power to the load. The charging voltage is preferably programmable, enabling one device to be used for a wide range of specific applications.

System for energy harvesting and/or generation, storage, and delivery

NASA Technical Reports Server (NTRS)

DeGreeff, Jenniffer Leigh (Inventor); Trainor, John T. (Inventor); Fleig, Patrick Franz (Inventor); Lakeman, Charles D. E. (Inventor)

2010-01-01

A device and method for harvesting, generating, storing, and delivering energy to a load, particularly for remote or inaccessible applications. The device preferably comprises one or more energy sources, at least one supercapacitor, at least one rechargeable battery, and a controller. The charging of the energy storage devices and the delivery of power to the load is preferably dynamically varied to maximize efficiency. A low power consumption charge pump circuit is preferably employed to collect power from low power energy sources while also enabling the delivery of higher voltage power to the load. The charging voltage is preferably programmable, enabling one device to be used for a wide range of specific applications.

XRF inductive bead fusion and PLC based control system

NASA Astrophysics Data System (ADS)

Zhu, Jin-hong; Wang, Ying-jie; Shi, Hong-xin; Chen, Qing-ling; Chen, Yu-xi

2009-03-01

In order to ensure high-quality X-ray fluorescence spectrometry (XRF) analysis, an inductive bead fusion machine was developed. The prototype consists of super-audio IGBT induction heating power supply, rotation and swing mechanisms, and programmable logic controller (PLC). The system can realize sequence control, mechanical movement control, output current and temperature control. Experimental results show that the power supply can operate at an ideal quasi-resonant state, in which the expected power output and the required temperature can be achieved for rapid heating and the uniform formation of glass beads respectively.

Analog Module Architecture for Space-Qualified Field-Programmable Mixed-Signal Arrays

NASA Technical Reports Server (NTRS)

Edwards, R. Timothy; Strohbehn, Kim; Jaskulek, Steven E.; Katz, Richard

1999-01-01

Spacecraft require all manner of both digital and analog circuits. Onboard digital systems are constructed almost exclusively from field-programmable gate array (FPGA) circuits providing numerous advantages over discrete design including high integration density, high reliability, fast turn-around design cycle time, lower mass, volume, and power consumption, and lower parts acquisition and flight qualification costs. Analog and mixed-signal circuits perform tasks ranging from housekeeping to signal conditioning and processing. These circuits are painstakingly designed and built using discrete components due to a lack of options for field-programmability. FPAA (Field-Programmable Analog Array) and FPMA (Field-Programmable Mixed-signal Array) parts exist but not in radiation-tolerant technology and not necessarily in an architecture optimal for the design of analog circuits for spaceflight applications. This paper outlines an architecture proposed for an FPAA fabricated in an existing commercial digital CMOS process used to make radiation-tolerant antifuse-based FPGA devices. The primary concerns are the impact of the technology and the overall array architecture on the flexibility of programming, the bandwidth available for high-speed analog circuits, and the accuracy of the components for high-performance applications.

Far-red light-mediated programmable anti-cancer gene delivery in cooperation with photodynamic therapy.

PubMed

Wang, Jinhui; He, Hua; Xu, Xin; Wang, Xiao; Chen, Yongbing; Yin, Lichen

2018-07-01

Effective anti-cancer therapy is hurdled by the complicated extracellular and intracellular barriers, and thus a smart gene vector that can enable programmable gene delivery is highly demanded. Photo-manipulation of gene delivery processes features spatial and temporal precision, while majority of current strategies utilizes short-wavelength UV/visible light with poor tissue penetration or high-power-density near-infrared (NIR) light that would cause undesired heat damage. Herein, an ROS-degradable polycation was designed and co-delivered with a photosensitizer (PS), thus realizing photo-programmable gene delivery using far-red light (661 nm) at low optical power density (down to 5 mW cm -2 ). Thioketal-crosslinked polyethylenimine (TK-PEI) was synthesized to condense p53 gene to form nanocomplexes (NCs), and hyaluronic acid (HA) modified with pheophytin a (Pha) was coated onto NCs to enhance their colloidal stability and enable cancer cell targeting. Short-time (8-min) light irradiation produced non-lethal amount of ROS to disrupt the endosomal membranes and facilitate p53 gene release via degradation of TK-PEI, which collectively enhanced p53 expression levels toward anti-cancer gene therapy. Long-time (30-min) light irradiation at the post-transfection state generated lethal amount of ROS, which cooperatively killed cancer cells to strengthen p53 gene therapy. To the best of our knowledge, this study represents the first example of an "one stone, three birds" approach to realize cooperative anti-cancer gene therapy using low-power-density, long-wavelength visible light as a single stimulus. Copyright © 2018 Elsevier Ltd. All rights reserved.

L-Band High Power Amplifiers for CEBAF Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fugitt, Jock; Killion, Richard; Nelson, Richard

1990-09-01

The high power portion of the CEBAF RF system utilizes 340 5kW klystrons providing 339 separately controlled outputs. Modulating anodes have been included in the klystron design to provide for economically efficient operation. The design includes shunt regulator-type modulating anode power supplies running from the cathode power supply, and switching filament power supplies. Remotely programmable filament voltage allows maximum cathode life to be realized. Klystron operating setpoint and fast klystron protection logic are provided by individual external CEBAF RF control modules. A single cathode power supply powers a block of eight klystrons. The design includes circulators and custom extrusion andmore » hybrid waveguide components which have allowed reduced physical size and lower cost in the design of the WR-650 waveguide transmission system.« less

Programmable Ultra-Lightweight System Adaptable Radio

NASA Technical Reports Server (NTRS)

Werkheiser, Arthur

2015-01-01

The programmable ultra-lightweight system adaptable radio (PULSAR) is a NASA Marshall Space Flight Center transceiver designed for the CubeSat market, but has the potential for other markets. The PULSAR project aims to reduce size, weight, and power while increasing telemetry data rate. The current version of the PULSAR has a mass of 2.2 kg and a footprint of 10.8 cm2. The height depends on the specific configuration. The PULSAR S-Band Communications Subsystem is an S- and X-band transponder system comprised of a receiver/detector (receiver) element, a transmitter element(s), and related power distribution, command, control, and telemetry element for operation and information interfaces. It is capable of receiving commands, encoding and transmitting telemetry, as well as providing tracking data in a manner compatible with Earthbased ground stations, near Earth network, and deep space network station resources. The software-defined radio's (SDR's) data format characteristics can be defined and reconfigured during spaceflight or prior to launch. The PULSAR team continues to evolve the SDR to improve the performance and form factor to meet the requirements that the CubeSat market space requires. One of the unique features is that the actual radio design can change (somewhat), but not require any hardware modifications due to the use of field programmable gate arrays.

Remotely Powered Reconfigurable Receiver for Extreme Environment Sensing Platforms

NASA Technical Reports Server (NTRS)

Sheldon, Douglas J.

2012-01-01

Wireless sensors connected in a local network offer revolutionary exploration capabilities, but the current solutions do not work in extreme environments of low temperatures (200K) and low to moderate radiation levels (<50 krad). These sensors (temperature, radiation, infrared, etc.) would need to operate outside the spacecraft/ lander and be totally independent of power from the spacecraft/lander. Flash memory field-programmable gate arrays (FPGAs) are being used as the main signal processing and protocol generation platform in a new receiver. Flash-based FPGAs have been shown to have at least 100 reduced standby power and 10 reduction operating power when compared to normal SRAM-based FPGA technology.

Concept report: Microprocessor control of electrical power system

NASA Technical Reports Server (NTRS)

Perry, E.

1977-01-01

An electrical power system which uses a microprocessor for systems control and monitoring is described. The microprocessor controlled system permits real time modification of system parameters for optimizing a system configuration, especially in the event of an anomaly. By reducing the components count, the assembling and testing of the unit is simplified, and reliability is increased. A resuable modular power conversion system capable of satisfying a large percentage of space applications requirements is examined along with the programmable power processor. The PC global controller which handles systems control and external communication is analyzed, and a software description is given. A systems application summary is also included.

The Diabetes Manual trial protocol – a cluster randomized controlled trial of a self-management intervention for type 2 diabetes [ISRCTN06315411

PubMed Central

Sturt, Jackie; Hearnshaw, Hilary; Farmer, Andrew; Dale, Jeremy; Eldridge, Sandra

2006-01-01

Background The Diabetes Manual is a type 2 diabetes self-management programme based upon the clinically effective 'Heart Manual'. The 12 week programme is a complex intervention theoretically underpinned by self-efficacy theory. It is a one to one intervention meeting United Kingdom requirements for structured diabetes-education and is delivered within routine primary care. Methods/design In a two-group cluster randomized controlled trial, GP practices are allocated by computer minimisation to an intervention group or a six-month deferred intervention group. We aim to recruit 250 participants from 50 practices across central England. Eligibility criteria are adults able to undertake the programme with type 2 diabetes, not taking insulin, with HbA1c over 8% (first 12 months) and following an agreed protocol change over 7% (months 13 to 18). Following randomisation, intervention nurses receive two-day training and delivered the Diabetes Manual programme to participants. Deferred intervention nurses receive the training following six-month follow-up. Primary outcome is HbA1c with total and HDL cholesterol; blood pressure, body mass index; self-efficacy and quality of life as additional outcomes. Primary analysis is between-group HbA1c differences at 6 months powered to give 80% power to detect a difference in HbA1c of 0.6%. A 12 month cohort analysis will assess maintenance of effect and assess relationship between self-efficacy and outcomes, and a qualitative study is running alongside. Discussion This trial incorporates educational and psychological diabetes interventions into a single programme and assesses both clinical and psychosocial outcomes. The trial will increase our understanding of intervention transferability between conditions, those diabetes related health behaviours that are more or less susceptible to change through efficacy enhancing mechanisms and how this impacts on clinical outcomes. PMID:16846517

The Diabetes Manual trial protocol - a cluster randomized controlled trial of a self-management intervention for type 2 diabetes [ISRCTN06315411].

PubMed

Sturt, Jackie; Hearnshaw, Hilary; Farmer, Andrew; Dale, Jeremy; Eldridge, Sandra

2006-07-17

The Diabetes Manual is a type 2 diabetes self-management programme based upon the clinically effective 'Heart Manual'. The 12 week programme is a complex intervention theoretically underpinned by self-efficacy theory. It is a one to one intervention meeting United Kingdom requirements for structured diabetes-education and is delivered within routine primary care. In a two-group cluster randomized controlled trial, GP practices are allocated by computer minimisation to an intervention group or a six-month deferred intervention group. We aim to recruit 250 participants from 50 practices across central England. Eligibility criteria are adults able to undertake the programme with type 2 diabetes, not taking insulin, with HbA1c over 8% (first 12 months) and following an agreed protocol change over 7% (months 13 to 18). Following randomisation, intervention nurses receive two-day training and delivered the Diabetes Manual programme to participants. Deferred intervention nurses receive the training following six-month follow-up. Primary outcome is HbA1c with total and HDL cholesterol; blood pressure, body mass index; self-efficacy and quality of life as additional outcomes. Primary analysis is between-group HbA1c differences at 6 months powered to give 80% power to detect a difference in HbA1c of 0.6%. A 12 month cohort analysis will assess maintenance of effect and assess relationship between self-efficacy and outcomes, and a qualitative study is running alongside. This trial incorporates educational and psychological diabetes interventions into a single programme and assesses both clinical and psychosocial outcomes. The trial will increase our understanding of intervention transferability between conditions, those diabetes related health behaviours that are more or less susceptible to change through efficacy enhancing mechanisms and how this impacts on clinical outcomes.

Microwave metamaterials—from passive to digital and programmable controls of electromagnetic waves

NASA Astrophysics Data System (ADS)

Cui, Tie Jun

2017-08-01

Since 2004, my group at Southeast University has been carrying out research into microwave metamaterials, which are classified into three catagories: metamaterials based on the effective medium model, plasmonic metamaterials for spoof surface plasmon polaritons (SPPs), and coding and programmable metamaterials. For effective-medium metamaterials, we have developed a general theory to accurately describe effective permittivity and permeability in semi-analytical forms, from which we have designed and realized a three dimensional (3D) wideband ground-plane invisibility cloak, a free-space electrostatic invisibility cloak, an electromagnetic black hole, optical/radar illusions, and radially anisotropic zero-index metamaterial for omni-directional radiation and a nearly perfect power combination of source array, etc. We have also considered the engineering applications of microwave metamaterials, such as a broadband and low-loss 3D transformation-optics lens for wide-angle scanning, a 3D planar gradient-index lens for high-gain radiations, and a random metasurface for reducing radar cross sections. In the area of plasmonic metamaterials, we proposed an ultrathin, narrow, and flexible corrugated metallic strip to guide SPPs with a small bending loss and radiation loss, from which we designed and realized a series of SPP passive devices (e.g. power divider, coupler, filter, and resonator) and active devices (e.g. amplifier and duplexer). We also showed a significant feature of the ultrathin SPP waveguide in overcoming the challenge of signal integrity in traditional integrated circuits, which will help build a high-performance SPP wireless communication system. In the area of coding and programmable metamaterials, we proposed a new measure to describe a metamaterial from the viewpoint of information theory. We have illustrated theoretically and experimentally that coding metamaterials composed of digital units can be controlled by coding sequences, leading to different functions. We realised that when the digital state of a coding unit is controlled by a field programmable gate array, the programmable metamaterial, which is capable of manipulating electromagnetic waves in real time, can generate many different functions.

Programmable differential capacitance-to-voltage converter for MEMS accelerometers

NASA Astrophysics Data System (ADS)

Royo, G.; Sánchez-Azqueta, C.; Gimeno, C.; Aldea, C.; Celma, S.

2017-05-01

Capacitive MEMS sensors exhibit an excellent noise performance, high sensitivity and low power consumption. They offer a huge range of applications, being the accelerometer one of its main uses. In this work, we present the design of a capacitance-to-voltage converter in CMOS technology to measure the acceleration from the capacitance variations. It is based on a low-power, fully-differential transimpedance amplifier with low input impedance and a very low input noise.

Solar Power Satellites - A Review of the Space Transportation Options.

DTIC Science & Technology

1980-03-01

already exists with such systems, gained mainly through liquid-metal breeder reactor programmes. 0 For example, inlet temperatures of 970 C can be handled...alternatives exist. In addition, there would be extreme reluctance on the part of most governments to allow large C- reactors , producing gigawatts of power, to...antenna. The reactors employed are high-temperature gas- cooled breeders , which convert U238 into fissile plutonium. Each of the modules includes a

Recent progress in research on tungsten materials for nuclear fusion applications in Europe

NASA Astrophysics Data System (ADS)

Rieth, M.; Dudarev, S. L.; Gonzalez de Vicente, S. M.; Aktaa, J.; Ahlgren, T.; Antusch, S.; Armstrong, D. E. J.; Balden, M.; Baluc, N.; Barthe, M.-F.; Basuki, W. W.; Battabyal, M.; Becquart, C. S.; Blagoeva, D.; Boldyryeva, H.; Brinkmann, J.; Celino, M.; Ciupinski, L.; Correia, J. B.; De Backer, A.; Domain, C.; Gaganidze, E.; García-Rosales, C.; Gibson, J.; Gilbert, M. R.; Giusepponi, S.; Gludovatz, B.; Greuner, H.; Heinola, K.; Höschen, T.; Hoffmann, A.; Holstein, N.; Koch, F.; Krauss, W.; Li, H.; Lindig, S.; Linke, J.; Linsmeier, Ch.; López-Ruiz, P.; Maier, H.; Matejicek, J.; Mishra, T. P.; Muhammed, M.; Muñoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Opschoor, J.; Ordás, N.; Palacios, T.; Pintsuk, G.; Pippan, R.; Reiser, J.; Riesch, J.; Roberts, S. G.; Romaner, L.; Rosiński, M.; Sanchez, M.; Schulmeyer, W.; Traxler, H.; Ureña, A.; van der Laan, J. G.; Veleva, L.; Wahlberg, S.; Walter, M.; Weber, T.; Weitkamp, T.; Wurster, S.; Yar, M. A.; You, J. H.; Zivelonghi, A.

2013-01-01

The current magnetic confinement nuclear fusion power reactor concepts going beyond ITER are based on assumptions about the availability of materials with extreme mechanical, heat, and neutron load capacity. In Europe, the development of such structural and armour materials together with the necessary production, machining, and fabrication technologies is pursued within the EFDA long-term fusion materials programme. This paper reviews the progress of work within the programme in the area of tungsten and tungsten alloys. Results, conclusions, and future projections are summarized for each of the programme's main subtopics, which are: (1) fabrication, (2) structural W materials, (3) W armour materials, and (4) materials science and modelling. It gives a detailed overview of the latest results on materials research, fabrication processes, joining options, high heat flux testing, plasticity studies, modelling, and validation experiments.

Worthy test programmes and developments of smart electromechanical actuators

NASA Astrophysics Data System (ADS)

Annaz, Fawaz Yahya

2007-02-01

Early aircraft flight control systems were totally manually operated, that is, the force required to move flight control surfaces was generated by the pilot and transmitted by cables and rods. As aerodynamics and airframe technology developed and speeds increased, the forces required to move control surfaces increased, as did the number of surfaces. In order to provide the extra power required, hydraulic technology was introduced. To date, the common element in the development of flight control systems has been, mainly, restricted to this type of technology. This is because of its proven reliability and the lack of alternative technologies. However, the technology to build electromechanically actuated primary flight control systems is now available. Motors developing the required power at the required frequencies are now possible (with the use of high energy permanent magnetic materials and compact high speed electronic circuits). It is this particular development which may make the concept of an 'all electric aircraft' realizable in the near future. The purpose of the all electric aircraft concept is the consolidation of all secondary power systems into electric power. The elimination of hydraulic and pneumatic secondary power systems will improve maintainability, flight readiness and use of energy. This paper will present the development of multi-lane smart electric actuators and offer an insight into other subsequent fields of study. The key areas of study may be categorized as follows. State of the art hydraulic actuators. Electromechanical actuator system test programmes. Development of electromechanical actuators. Modelling of electromechanical actuators.

Start Up Application Concerns with Field Programmable Gate Arrays (FPGAs)

NASA Technical Reports Server (NTRS)

Katz, Richard B.

1999-01-01

This note is being published to improve the visibility of this subject, as we continue to see problems surface in designs, as well as to add additional information to the previously published note for design engineers. The original application note focused on designing systems with no single point failures using Actel Field Programmable Gate Arrays (FPGAs) for critical applications. Included in that note were the basic principles of operation of the Actel FPGA and a discussion of potential single-point failures. The note also discussed the issue of startup transients for that class of device. It is unfortunate that we continue to see some design problems using these devices. This note will focus on the startup properties of certain electronic components, in general, and current Actel FPGAs, in particular. Devices that are "power-on friendly" are currently being developed by Actel, as a variant of the new SX series of FPGAs. In the ideal world, electronic components would behave much differently than they do in the real world, The chain, of course, starts with the power supply. Ideally, the voltage will immediately rise to a stable V(sub cc) level, of course, it does not. Aside from practical design considerations, inrush current limits of certain capacitors must be observed and the power supply's output may be intentionally slew rate limited to prevent a large current spike on the system power bus. In any event, power supply rise time may range from less than I msec to 100 msec or more.

A control system based on field programmable gate array for papermaking sewage treatment

NASA Astrophysics Data System (ADS)

Zhang, Zi Sheng; Xie, Chang; Qing Xiong, Yan; Liu, Zhi Qiang; Li, Qing

2013-03-01

A sewage treatment control system is designed to improve the efficiency of papermaking wastewater treatment system. The automation control system is based on Field Programmable Gate Array (FPGA), coded with Very-High-Speed Integrate Circuit Hardware Description Language (VHDL), compiled and simulated with Quartus. In order to ensure the stability of the data used in FPGA, the data is collected through temperature sensors, water level sensor and online PH measurement system. The automatic control system is more sensitive, and both the treatment efficiency and processing power are increased. This work provides a new method for sewage treatment control.

The Search for Life in the Universe: The Past Through the Future

NASA Astrophysics Data System (ADS)

Lebofsky, L. A.; Lebofsky, A.; Lebofsky, M.; Lebofsky, N. R.

2003-05-01

``Are we alone?'' This is a question that has been asked by humans for thousands of years. More than any other topic in science, the search for life in the Universe has captured the imagination. Now, for the first time in history, we are on the verge of answering this question. The search for life beyond the Earth can be seen as far back as the 17th century writings of Bishops F. Godwin and J. Wilkins and S. Cyrano de Bergerac to the early 20th century's H. G. Wells. From a scientific perspective, this search led to the formulation of the Drake Equation which in turn has led to a number of projects that are searching for signs of intelligent life beyond the Earth, the Search for Extraterrestrial Intelligence. SETI@home reaches millions of users, including thousands of K-12 teachers across the nation. We are developing a project that will enhance the SETI@home web site located at UC Berkeley. The project unites the resources of the SETI@home distributed computing community web site, university settings, and informal science learning centers. It will reach approximately 100,000 learners. The goal is to increase public understanding of math and science and to create and strengthen the connections between informal and formal learning communities. We will present a variety of ways that the Drake Equation and SETI@home can enhance the public and student understanding of the search for life in the Universe, from its roots in literature, to the development (and evolution) of the Drake Equation, to the actual search for life with SETI.

A programmable and self-adjusting class E amplifier for efficient wireless powering of biomedical implants.

PubMed

Stoecklin, S; Volk, T; Yousaf, A; Reindl, L

2015-01-01

In this paper, an enhanced approach of a class E amplifier being insensitive to coil impedance variations is presented. While state of the art class E amplifiers widely being used to supply implanted systems show a strong degradation of efficiency when powering distance, coil orientation or the implant current consumption deviate from the nominal design, the presented concept is able to detect these deviations on-line and to reconfigure the amplifier automatically. The concept is facilitated by a new approach of sensing the load impedance without interruption of the power supply to the implant, while the main components of the class E amplifier are programmable by software. Therefore, the device is able to perform dynamic impedance matching. Besides presenting the operational principle and the design equations, we show an adaptive prototype reader system which achieves a drain efficiency of up to 92% for a wide range of reflected coil impedances from 1 to 40 Ω. The integrated communication concept allows downlink data rates of up to 500 kBit/s, while the load modulation based uplink from implant to reader was verified of providing up to 1.35 MBit/s.

Emulating DC constant power load: a robust sliding mode control approach

NASA Astrophysics Data System (ADS)

Singh, Suresh; Fulwani, Deepak; Kumar, Vinod

2017-09-01

This article presents emulation of a programmable power electronic, constant power load (CPL) using a dc/dc step-up (boost) converter. The converter is controlled by a robust sliding mode controller (SMC). A novel switching surface is proposed to ensure a required power sunk by the converter. The proposed dc CPL is simple in design, has fast dynamic response and high accuracy, and offers an inexpensive alternative to study converters for cascaded dc distribution power system applications. Furthermore, the proposed CPL is sufficiently robust against the input voltage variations. A laboratory prototype of the proposed dc CPL has been developed and validated with SMC realised through OPAL-RT platform. The capability of the proposed dc CPL is confirmed via experimentations in varied scenarios.

The effects of training with loads that maximise power output and individualised repetitions vs. traditional power training

PubMed Central

Moya-Ramón, M.; Hernández-Davó, J. L.; Fernandez-Fernandez, J.; Sabido, R.

2017-01-01

Background It has been suggested that strength training effects (i.e. neural or structural) vary, depending on the total repetitions performed and velocity loss in each training set. Purpose The aim of this study is to compare the effects of two training programmes (i.e. one with loads that maximise power output and individualised repetitions, and the other following traditional power training). Methods Twenty-five males were divided into three groups (optimum power [OP = 10], traditional training [TT = 9] and control group [CG = 6]). The training load used for OP was individualised using loads that maximised power output (41.7% ± 5.8 of one repetition maximum [1RM]) and repetitions at maximum power (4 to 9 repetitions, or ‘reps’). Volume (sets x repetitions) was the same for both experimental groups, while intensity for TT was that needed to perform only 50% of the maximum number of possible repetitions (i.e. 61.1%–66.6% of 1RM). The training programme ran over 11 weeks (2 sessions per week; 4–5 sets per session; 3-minute rests between sets), with pre-, intermediate and post-tests which included: anthropometry, 1RM, peak power output (PPO) with 30%, 40% and 50% of 1RM in the bench press throw, and salivary testosterone (ST) and cortisol (SC) concentrations. Rate of perceived exertion (RPE) and power output were recorded in all sessions. Results Following the intermediate test, PPO was increased in the OP group for each load (10.9%–13.2%). Following the post-test, both experimental groups had increased 1RM (11.8%–13.8%) and PPO for each load (14.1%–19.6%). Significant decreases in PPO were found for the TT group during all sets (4.9%–15.4%), along with significantly higher RPE (37%). Conclusion OP appears to be a more efficient method of training, with less neuromuscular fatigue and lower RPE. PMID:29053725

A randomized clinical trial of oral hygiene care programmes during stroke rehabilitation.

PubMed

Dai, Ruoxi; Lam, Otto L T; Lo, Edward C M; Li, Leonard S W; McGrath, Colman

2017-06-01

The objectives of this study were to evaluate and compare the effectiveness of an advanced oral hygiene care programme (AOHCP) and a conventional oral hygiene care programme (COHCP) in improving oral hygiene, and reducing gingival bleeding among patients with stroke during outpatient rehabilitation. Subjects were randomized to receive (i) the COHCP comprising a manual toothbrush, toothpaste, and oral hygiene instruction, or (ii) the AOHCP comprising a powered toothbrush, 0.2% chlorhexidine mouthrinse, toothpaste, and oral hygiene instruction. Dental plaque, gingival bleeding, and other clinical oral health outcomes were assessed at baseline, the end of the clinical trial, and the end of observation period. Development of infectious complications was also monitored. Participants of both programmes had a significant reduction in the percentages of sites with moderate to abundant dental plaque (p<0.001) and with gingival bleeding (p<0.05). Those in the AOHCP had significantly less plaque and gingival bleeding than those in the COHCP controlling for other factors at the end of the clinical trial period (both p<0.001) and the observational period (plaque: p<0.05, gingival bleeding: p<0.01). Although both oral hygiene care programmes were effective in terms of plaque and gingival bleeding control, the AOHCP was more effective than the COHCP in reducing dental plaque and gingival bleeding. This study highlighted the value of oral hygiene programmes within stroke outpatient rehabilitation and provides evidence to advocate for the inclusion of oral hygiene care programmes within stroke outpatient rehabilitation for patients with normal cognitive abilities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of school based oral health education programmes in India: a systematic review.

PubMed

Gambhir, Ramandeep Singh; Sohi, Ramandeep Kaur; Nanda, Tarun; Sawhney, Gurjashan Singh; Setia, Saniya

2013-12-01

The teaching of Oral Health Education aims at preventing the dental disease and promoting dental health at early stages. Schools are powerful places to shape the health, education and well-being of our children. The objective of this study was to determine the impact of school dental health education programmes conducted in various parts of India. A systematic review from available literature was carried out. The study examined papers relating to oral health interventions which were published between 1992 and 2012. Ten articles were selected and included in the review. All the studies were found to contain the required information on the outcomes of school dental health programmes in India. Different methods were used to deliver oral health education. All the studies reported significant improvement in oral hygiene of school children after imparting dental health education. In some studies, school teachers were also trained to impart oral health education. Decreased level of awareness was found in children coming from low income families. Longer duration studies are needed to improve the results. School dental education programmes should be more focused on north-eastern Indian population.

Hydrogen sensor

DOEpatents

Duan, Yixiang; Jia, Quanxi; Cao, Wenqing

2010-11-23

A hydrogen sensor for detecting/quantitating hydrogen and hydrogen isotopes includes a sampling line and a microplasma generator that excites hydrogen from a gas sample and produces light emission from excited hydrogen. A power supply provides power to the microplasma generator, and a spectrometer generates an emission spectrum from the light emission. A programmable computer is adapted for determining whether or not the gas sample includes hydrogen, and for quantitating the amount of hydrogen and/or hydrogen isotopes are present in the gas sample.

Journal of the Royal Naval Scientific Service. Volume 29, Number 6, November 1974

DTIC Science & Technology

1974-11-01

Haigh 74 Exposure from Nuclear Power 39 Exposure Trials Station 8 F Fault Finding 265 Formac 222 Fraser, D. SPATS 146...L. R. Hinkley Defence Research Information Centre Mr. R. V. Aired Head, Resources and Programmes A Mr. D. J. Strong Staff of Scientific...greater, the level of the third order product to be at least 120 dB below the level of either signal. (k) Power handling The antenna to be capable of

Effects of developmental training of basketball cadets realised in the competitive period.

PubMed

Trninić, S; Marković, G; Heimer, S

2001-12-01

The analysis of effects of a two-month developmental training cycle realised within a basketball season revealed statistically significant positive changes at the multivariate level in components of motor-functional conditioning (fitness) status of the sample of talented basketball cadets (15-16 years). The greatest correlations with discriminant function were found in variables with statistically significant changes at the univariate level, more explicitly in variables of explosive and repetitive power of the upper body and trunk, anaerobic lactic endurance, as well as in jumping type explosive leg power. The presented developmental conditioning training programme, although implemented within the competitive period, induced multiple positive fitness effects between the two control time points in this sample of basketball players. The authors suggest that, to assess power of shoulders and upper back, the test overgrip pull-up should not be applied to basketball players of this age due to its poor sensitivity. Instead, they propose the undergrip pull-up test, which is a facilitated version of the same test. The results presented in this article reinforce experienced opinion of experts that, in the training process with youth teams, the developmental conditioning training programme is effectively applicable throughout the entire competitive season. The proposed training model is a system of various training procedures, operating synergistically, aimed at enhancing integral fitness (preparedness) of basketball players. Further investigations should be focused on assessing effects of both the proposed and other developmental training cycle programmes, by means of assessing and monitoring actual quality (overall performance) of players, on the one hand, and, on the other, by following-up hormonal and biochemical changes over multiple time points.

From marginal to marginalised: The inclusion of men who have sex with men in global and national AIDS programmes and policy.

PubMed

McKay, Tara

2016-01-01

In the last decade, gay men and other men who have sex with men (msm) have come to the fore of global policy debates about AIDS prevention. In stark contrast to programmes and policy during the first two decades of the epidemic, which largely excluded msm outside of the Western countries, the Joint United Nations Programme on HIV/AIDS now identifies gay men and other msm as 'marginalized but not marginal' to the global response. Drawing on archival data and five waves of United Nations Country Progress Reports on HIV/AIDS (2001-2012), this paper examines the productive power of international organisations in the development and diffusion of the msm category, and considers how international organisations have shaped the interpretation of msm in national policies and programmes. These data show that the increasing separation of sexual identity and sexual behaviour at the global level helped to construct notions of risk and disease that were sufficiently broad to accommodate the diverse interests of global policy-makers, activists, and governments. However, as various international and national actors have attempted to develop prevention programmes for msm, the failure of the msm category to map onto lived experience is increasingly apparent.

A Global Perspective: NASA's Prediction of Worldwide Energy Resources (POWER) Project

NASA Technical Reports Server (NTRS)

Zhang, Taiping; Stackhouse, Paul W., Jr.; Chandler, William S.; Hoell, James M.; Westberg, David; Whitlock, Charles H.

2007-01-01

The Prediction of the Worldwide Energy Resources (POWER) Project, initiated under the NASA Science Mission Directorate Applied Science Energy Management Program, synthesizes and analyzes data on a global scale that are invaluable to the renewable energy industries, especially to the solar and wind energy sectors. The POWER project derives its data primarily from NASA's World Climate Research Programme (WCRP)/Global Energy and Water cycle Experiment (GEWEX) Surface Radiation Budget (SRB) project (Version 2.9) and the Global Modeling and Assimilation Office (GMAO) Goddard Earth Observing System (GEOS) assimilation model (Version 4). The latest development of the NASA POWER Project and its plans for the future are presented in this paper.

Insulin sensitizing drugs for weight loss in women of reproductive age who are overweight or obese: systematic review and meta-analysis.

PubMed

Nieuwenhuis-Ruifrok, A E; Kuchenbecker, W K H; Hoek, A; Middleton, P; Norman, R J

2009-01-01

Women of reproductive age, who are overweight or obese, are prone to infertility. Weight loss in these women leads to increased fecundity, higher chances of conception after infertility treatment and improved pregnancy outcome. In spite of the advantages, most patients have difficulty in losing weight and often regain lost weight over time. This review assesses whether treatment with insulin sensitizing drugs contributes to weight loss, compared with diet or a lifestyle modification programme. After a systematic search of the literature, only randomized controlled trials (RCTs), investigating the effect of insulin sensitizing drugs on weight loss compared with placebo and diet and/or a lifestyle modification programme, were included. Subjects were restricted to women of reproductive age. The main outcome measure was change in body mass index (BMI). Only 14 trials, unintentionally all but two on women with polycystic ovary syndrome (PCOS) only, were included in the analysis. Treatment with metformin showed a statistically significant decrease in BMI compared with placebo (weighted mean difference, -0.68; 95% CI -1.13 to -0.24). There was some indication of greater effect with high-dose metformin (>1500 mg/day) and longer duration of therapy (>8 weeks). Limitations were power, low use of intention-to-treat analysis and heterogeneity of the studies. A structured lifestyle modification programme to achieve weight loss should still be the first line treatment in obese women with or without PCOS. Adequately powered RCTs are required to confirm the findings of this review and to assess whether the addition of high-dose metformin therapy to a structured lifestyle modification programme might contribute to more weight loss.

Programmed optoelectronic time-pulse coded relational processor as base element for sorting neural networks

NASA Astrophysics Data System (ADS)

Krasilenko, Vladimir G.; Bardachenko, Vitaliy F.; Nikolsky, Alexander I.; Lazarev, Alexander A.

2007-04-01

In the paper we show that the biologically motivated conception of the use of time-pulse encoding gives the row of advantages (single methodological basis, universality, simplicity of tuning, training and programming et al) at creation and designing of sensor systems with parallel input-output and processing, 2D-structures of hybrid and neuro-fuzzy neurocomputers of next generations. We show principles of construction of programmable relational optoelectronic time-pulse coded processors, continuous logic, order logic and temporal waves processes, that lie in basis of the creation. We consider structure that executes extraction of analog signal of the set grade (order), sorting of analog and time-pulse coded variables. We offer optoelectronic realization of such base relational elements of order logic, which consists of time-pulse coded phototransformers (pulse-width and pulse-phase modulators) with direct and complementary outputs, sorting network on logical elements and programmable commutations blocks. We make estimations of basic technical parameters of such base devices and processors on their basis by simulation and experimental research: power of optical input signals - 0.200-20 μW, processing time - microseconds, supply voltage - 1.5-10 V, consumption power - hundreds of microwatts per element, extended functional possibilities, training possibilities. We discuss some aspects of possible rules and principles of training and programmable tuning on the required function, relational operation and realization of hardware blocks for modifications of such processors. We show as on the basis of such quasiuniversal hardware simple block and flexible programmable tuning it is possible to create sorting machines, neural networks and hybrid data-processing systems with the untraditional numerical systems and pictures operands.

Children's environmental knowing: A case study of children's experiences during an environmental education programme

NASA Astrophysics Data System (ADS)

Scott, Sandra Anne

This study explores children's experiences during WaterWorlds (pseudonym) a field-based environmental education programme at a marine science centre. The study objectives were to investigate how children understand and interpret their experiences, and how these experiences foster their environmental knowing. To address these objectives, I carried out a case study at a marine science centre in British Columbia. I examined children's WaterWorlds experiences and explored their environmental understandings and commitment to environmental action. I analysed the experiences of children in four separate classes and carried out an in-depth examination of four individual children. Data were collected using informal semi-structured interviews, observations, conversations, researcher journal logs, and student documents including their writing and illustrations. My findings indicate that the WaterWorlds programme experience fosters children's environmental knowing. Participation in WaterWorlds activities led to connection, caring, and concern for other species and in some cases, for the marine environment as a whole. During the programme, children chose the ways they interpreted and expressed their environmental knowledge, ethic of care, advocacy, and commitment to action. This development of each child's self-expression resulted in motivational and powerful learning experiences that inspired and nurtured their connections to the earth. This research provides evidence and examples of how educators can foster children's environmental knowing through multi-disciplinary environmental education experiences. It illustrates that activities such as observing and documenting the lives of other animal species, collecting data and conducting research on those species, and working and learning alongside experts in the field of environmental education are powerful experiences that motivate concern and care for the earth among children.

Miniature Intelligent Sensor Module

NASA Technical Reports Server (NTRS)

Beech, Russell S.

2007-01-01

An electronic unit denoted the Miniature Intelligent Sensor Module performs sensor-signal-conditioning functions and local processing of sensor data. The unit includes four channels of analog input/output circuitry, a processor, volatile and nonvolatile memory, and two Ethernet communication ports, all housed in a weathertight enclosure. The unit accepts AC or DC power. The analog inputs provide programmable gain, offset, and filtering as well as shunt calibration and auto-zeroing. Analog outputs include sine, square, and triangular waves having programmable frequencies and amplitudes, as well as programmable amplitude DC. One innovative aspect of the design of this unit is the integration of a relatively powerful processor and large amount of memory along with the sensor-signalconditioning circuitry so that sophisticated computer programs can be used to acquire and analyze sensor data and estimate and track the health of the overall sensor-data-acquisition system of which the unit is a part. The unit includes calibration, zeroing, and signalfeedback circuitry to facilitate health monitoring. The processor is also integrated with programmable logic circuitry in such a manner as to simplify and enhance acquisition of data and generation of analog outputs. A notable unique feature of the unit is a cold-junction compensation circuit in the back shell of a sensor connector. This circuit makes it possible to use Ktype thermocouples without compromising a housing seal. Replicas of this unit may prove useful in industrial and manufacturing settings - especially in such large outdoor facilities as refineries. Two features can be expected to simplify installation: the weathertight housings should make it possible to mount the units near sensors, and the Ethernet communication capability of the units should facilitate establishment of communication connections for the units.

Critical pedagogy in a health service management development programme: can "critically thinking" managers change the NHS management culture?

PubMed

Sambrook, Sally

2009-01-01

Management development programmes available to NHS managers focus on a performance orientation and sustain a culture of managerial and medical domination. This paper aims to question whether it is possible to consider NHS management development from a critical (empowerment culture) perspective. Features of the critical management studies approach (CMS) are identified. A new MSc is evaluated against these characteristics, examining the teaching and learning processes and students' perceptions of the programme. The aim is to develop critical thinkers who can return to their organizations and challenge existing power structures and practices to change local cultures and enhance health services. Empirical research employed anonymous student questionnaires and a focus group. Student evaluations suggest the MSc can deliver a critical pedagogy and help managers understand issues of power and empowerment, challenge dominant cultures, innovate and effect small, local changes in the NHS culture. There is a need to continue evaluating the programme and include other stakeholders. Longitudinal research should assess the impact of the managers' changed values, attitudes and behaviours on colleagues, clients and the local cultures. The paper identifies some of the tensions of developing "critical" health service managers, and the problems they encounter back in the "uncritical" NHS context, as well as some of the challenges in "facilitating" a critical curriculum. It questions the ethics of developing (or not) a critical perspective in a local context unfamiliar with CMS. Management development in the NHS largely ignores critical pedagogy. This paper makes a small and unique contribution to understanding how developing "critically thinking" managers can challenge the dominant culture. However, the limitations of such a small-scale study and ethical implications are noted.

(Re)politicising and (re)positioning prevention: community mobilisations and AIDS prevention in the new AIDS era.

PubMed

Rolston, Imara Ajani

2016-07-01

An increasing focus on the relationship between AIDS prevalence and socio-economic inequality signals the need for a revaluation of the role of "politics" and "power" in AIDS prevention. This revaluation bears great significance when considering the future trajectories of the AIDS prevention efforts that target highly marginalised populations with high prevalence rates. An emphasis on intersecting forms of inequality has direct implications for the future of AIDS prevention practice. This study explores the experiences of participants, facilitators and local stakeholders applying the United Nations Development Programme (UNDP) Community Capacity Enhancement-Community Conversations (CCE-CC) approach to AIDS prevention in the Eastern Cape province of South Africa. It uses the political narrative analysis of life histories and semi-structured interviews as a means to interrogate the lived experiences of local actors participating in or influenced by this popularised form of community mobilisation used throughout sub-Saharan Africa. Findings suggest the need for a more explicit and intentional valuation for the intersection between the social and political determinants of health in programmes that use community mobilisation as prevention. They also signal a need to critically re-evaluate "community mobilisation" as an AIDS prevention tradition. Intersecting social and political power dynamics play a significant role in both opening up and constraining community mobilisation efforts. This paper proposes the need for a pedagogical turn to "deep organising" and "participatory forms of democracy", as a necessary frontier for programmes working with highly marginalised populations with high prevalence rates. Programmes need to more explicitly support, protect, and advocate for the ability of affected communities to engage in political processes, discourse and long-term organising.

Safe motherhood voucher programme coverage of health facility deliveries among poor women in South-western Uganda.

PubMed

Kanya, Lucy; Obare, Francis; Warren, Charlotte; Abuya, Timothy; Askew, Ian; Bellows, Ben

2014-07-01

There has been increased interest in and experimentation with demand-side mechanisms such as the use of vouchers that place purchasing power in the hands of targeted consumers to improve the uptake of healthcare services in low-income settings. A key measure of the success of such interventions is the extent to which the programmes have succeeded in reaching the target populations. This article estimates the coverage of facility deliveries by a maternal health voucher programme in South-western Uganda and examines whether such coverage is correlated with district-level characteristics such as poverty density and the number of contracted facilities. Analysis entails estimating the voucher coverage of health facility deliveries among the general population and poor population (PP) using programme data for 2010, which was the most complete calendar year of implementation of the Uganda safe motherhood (SM) voucher programme. The results show that: (1) the programme paid for 38% of estimated deliveries among the PP in the targeted districts, (2) there was a significant negative correlation between the poverty density in a district and proportions of births to poor women that were covered by the programme and (3) improving coverage of health facility deliveries for poor women is dependent upon increasing the sales and redemption rates. The findings suggest that to the extent that the programme stimulated demand for SM services by new users, it has the potential of increasing facility-based births among poor women in the region. In addition, the significant negative correlation between the poverty density and the proportions of facility-based births to poor women that are covered by the voucher programme suggests that there is need to increase both voucher sales and the rate of redemption to improve coverage in districts with high levels of poverty. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2013; all rights reserved.

The da Vinci robot.

PubMed

Moran, Michael E

2006-12-01

One might assume from the title of this paper that the nuances of a complex mechanical robot will be discussed, and this would be correct. On the other hand, the date of the design and possible construction of this robot was 1495, a little more than five centuries ago. The key point in the title is the lack of a trademarked name, as Leonardo was the designer of this sophisticated system. His notes from the Codex Altanticus represent the foundation of this report. English translations of da Vinci's notebooks are currently available. Beginning in the 1950s, investigators at the University of California began to ponder the significance of some of da Vinci's markings on what appeared to be technical drawings. Such markings also occur in his Codex Atlanticus (the largest single collection of da Vinci's sheets, consisting of 1119 separate pages and 481 folios) along with a large number of other mechanical devices. Continuing research at the Instituto e Museo di Storia della Scienza in Florence has yielded a great deal of information about Leonardo's intentions with regard to his mechanical knight. It is now known that da Vinci's robot would have had the outer appearance of a Germanic knight. It had a complex core of mechanical devices that probably was human powered. The robot had two independent operating systems. The first had three degree-of-freedom legs, ankles, knees, and hips. The second had four degrees of freedom in the arms with articulated shoulders, elbows, wrists, and hands. A mechanical analog-programmable controller within the chest provided the power and control for the arms. The legs were powered by an external crank arrangement driving the cable, which connected to key locations near each lower extremity's joints. Da Vinci also is known to have devised a programmable front-wheel-drive automobile with rack-and-pinion suspension mechanisms at age 26. He would recall this device again, when, at age 40, he is thought to have built a programmable automated lion, but by then, he had produced his own metal springs as well as drum-containing springs called tambours. He positioned his fusee to a stationary rotating power output shaft that would be used to power his programmable automaton. Part of the obscurity of da Vinci's robot comes from the difficulties interpreting Leonardo's markings. His designs precede any formal method of blueprint designing. The technical aspects had to be deciphered before anyone could even attempt to reproduce his intended device. This robotic device fits together with other pieces of evidence that link 15(th) Century automatons to da Vinci's design, namely the automated Tea Servers from Spain. As with many things from da Vinci, looking backward at this master leaves one with a pronounced sense of awe at his prescient view of the world.

Comrades' Power: Student Representation and Activism in Universities in Kenya

ERIC Educational Resources Information Center

Macharia, Mwangi J.

2015-01-01

In the last decade, student politics and governance of universities in Kenya and in other African countries have undergone a tremendous transformation. The unprecedented expansion and massification of public universities, the introduction of "Module 2" programmes, the admission of private, "parallel" and…

Professional Learning: Lessons for Supervision from Doctoral Examining

ERIC Educational Resources Information Center

Wisker, Gina; Kiley, Margaret

2014-01-01

Most research into research supervision practice focuses on functional, collegial or problematic power-related experiences. Work developing the supervisory role concentrates on new supervisors, and on taught development and support programmes. Most literature on academics' professional learning concentrates on learning to be a university teacher…

Digital Technologies Jump Start Telemedicine

ERIC Educational Resources Information Center

Pierce, Alan

2011-01-01

The technologists, research doctors, computer programmers, electrical engineers, and biomedical engineers who design and create new medical diagnostic equipment and medical treatments are now working on medical systems that use the computing power of personal computers and cell phones. For disease diagnosis, they are finding ways to shrink…

A Versatile Planetary Radio Science Microreceiver

NASA Technical Reports Server (NTRS)

Fry, Craig D.; Rosenberg, T. J.

1999-01-01

We have developed a low-power. programmable radio "microreceiver" that combines the functionality of two science instruments: a Relative Ionospheric Opacity Meter (riometer) and a swept-frequency, VTF/HF radio spectrometer. The radio receiver, calibration noise source, data acquisition and processing, and command and control functions are all contained on a single circuit board. This design is suitable for miniaturizing as a complete flight instrument. Several of the subsystems were implemented in a field-programmable gate array (FPGA), including the receiver detector, the control logic, and the data acquisition and processing blocks. Considerable efforts were made to reduce the power consumption of the instrument, and eliminate or minimize RF noise and spurious emissions generated by the receiver's digital circuitry. A prototype instrument was deployed at McMurdo Station, Antarctica, and operated in parallel with a traditional riometer instrument for approximately three weeks. The attached paper (accepted for publication by Radio Science) describes in detail the microreceiver theory of operation, performance specifications and test results.

A 50Mbit/Sec. CMOS Video Linestore System

NASA Astrophysics Data System (ADS)

Jeung, Yeun C.

1988-10-01

This paper reports the architecture, design and test results of a CMOS single chip programmable video linestore system which has 16-bit data words with 1024 bit depth. The delay is fully programmable from 9 to 1033 samples by a 10 bit binary control word. The large 16 bit data word width makes the chip useful for a wide variety of digital video signal processing applications such as DPCM coding, High-Definition TV, and Video scramblers/descramblers etc. For those applications, the conventional large fixed-length shift register or static RAM scheme is not very popular because of its lack of versatility, high power consumption, and required support circuitry. The very high throughput of 50Mbit/sec is made possible by a highly parallel, pipelined dynamic memory architecture implemented in a 2-um N-well CMOS technology. The basic cell of the programmable video linestore chip is an four transistor dynamic RAM element. This cell comprises the majority of the chip's real estate, consumes no static power, and gives good noise immunity to the simply designed sense amplifier. The chip design was done using Bellcore's version of the MULGA virtual grid symbolic layout system. The chip contains approximately 90,000 transistors in an area of 6.5 x 7.5 square mm and the I/Os are TTL compatible. The chip is packaged in a 68-pin leadless ceramic chip carrier package.

How the strengths of Lisp-family languages facilitate building complex and flexible bioinformatics applications

PubMed Central

Khomtchouk, Bohdan B; Weitz, Edmund; Karp, Peter D; Wahlestedt, Claes

2018-01-01

Abstract We present a rationale for expanding the presence of the Lisp family of programming languages in bioinformatics and computational biology research. Put simply, Lisp-family languages enable programmers to more quickly write programs that run faster than in other languages. Languages such as Common Lisp, Scheme and Clojure facilitate the creation of powerful and flexible software that is required for complex and rapidly evolving domains like biology. We will point out several important key features that distinguish languages of the Lisp family from other programming languages, and we will explain how these features can aid researchers in becoming more productive and creating better code. We will also show how these features make these languages ideal tools for artificial intelligence and machine learning applications. We will specifically stress the advantages of domain-specific languages (DSLs): languages that are specialized to a particular area, and thus not only facilitate easier research problem formulation, but also aid in the establishment of standards and best programming practices as applied to the specific research field at hand. DSLs are particularly easy to build in Common Lisp, the most comprehensive Lisp dialect, which is commonly referred to as the ‘programmable programming language’. We are convinced that Lisp grants programmers unprecedented power to build increasingly sophisticated artificial intelligence systems that may ultimately transform machine learning and artificial intelligence research in bioinformatics and computational biology. PMID:28040748

Protocols and participatory democracy in a 'North-South' product development partnership.

PubMed

Montgomery, Catherine M

2012-09-01

Global product development partnerships (PDPs) for new health technologies have become an increasingly important part of the science and development landscape over the past two decades. Polarised positions are adopted by those scrutinising the power and governance of these public-private formations; on the one hand, they are seen as successful social technology innovations, on the other as regressive and imperialistic regimes of neo-colonialism. Answering recent calls for research to examine the actors, governance, context and dynamics of PDPs, this article presents a sociological case study of one particular partnership, the Microbicides Development Programme (MDP). Interviews were conducted with a cross-section of programme staff in the UK and Zambia, and discourses analysed through a Foucauldian lens of governmentality. This article suggests that two tools of government were central to MDP's cohesiveness: institutional discourses of participatory democracy and capacity building and scientific protocols. Through these material-semiotic tools, the scientific community, junior operational researchers and the funder were successfully enrolled into the programme and governed by a central body based in the UK. This article draws on Nikolas Rose's work to discuss these socio-scientific discourses as technologies of government, and provides a non-dualistic account of power and governance in a North-South PDP. © 2012 The Author. Sociology of Health & Illness © 2012 Foundation for the Sociology of Health & Illness/Blackwell Publishing Ltd.

How the strengths of Lisp-family languages facilitate building complex and flexible bioinformatics applications.

PubMed

Khomtchouk, Bohdan B; Weitz, Edmund; Karp, Peter D; Wahlestedt, Claes

2018-05-01

We present a rationale for expanding the presence of the Lisp family of programming languages in bioinformatics and computational biology research. Put simply, Lisp-family languages enable programmers to more quickly write programs that run faster than in other languages. Languages such as Common Lisp, Scheme and Clojure facilitate the creation of powerful and flexible software that is required for complex and rapidly evolving domains like biology. We will point out several important key features that distinguish languages of the Lisp family from other programming languages, and we will explain how these features can aid researchers in becoming more productive and creating better code. We will also show how these features make these languages ideal tools for artificial intelligence and machine learning applications. We will specifically stress the advantages of domain-specific languages (DSLs): languages that are specialized to a particular area, and thus not only facilitate easier research problem formulation, but also aid in the establishment of standards and best programming practices as applied to the specific research field at hand. DSLs are particularly easy to build in Common Lisp, the most comprehensive Lisp dialect, which is commonly referred to as the 'programmable programming language'. We are convinced that Lisp grants programmers unprecedented power to build increasingly sophisticated artificial intelligence systems that may ultimately transform machine learning and artificial intelligence research in bioinformatics and computational biology.

The liberal arts and nursing programme at the University of Maine, 1939-1956. A study of leadership behaviours and organisational structure.

PubMed

Hart, V

2001-01-01

The trend for nursing programmes affiliated with universities in the US began in 1909 but did not gain momentum until the 1960s with the demise of hospital schools of nursing. During the period of time covered in this study, beginning in the 1930s, a hybrid of the present day university-based nursing programme began to appear. These 'cooperative' programmes often sandwiched traditional hospital experience between years of university course work and involved a five-year commitment on the part of students. In 1939 a liberal arts and nursing programme was established at the University of Maine. It continued to operate until 1956 and then ceased to exist. In this descriptive historical study the author investigates why this particular programme was initiated, of what it consisted, and why it had failed. Primary sources accessed included original correspondence, curriculum descriptions, faculty and students reports, and administrative policies. Leadership and organisational behaviour theory was utilised as well as identification of the historical nursing backdrop. Oral history was also utilised for the purpose of verification of written data. Analysis of the data suggests implications for nursing educators and administrators, as well as telling a story of the power of nursing when viewed in the context of constituency groups in a sociopolitical model of organisations. This paper was first presented at the History of Nursing Millennium Conference in Edinburgh in July 2000.

The role of partnership functioning and synergy in achieving sustainability of innovative programmes in community care.

PubMed

Cramm, Jane M; Phaff, Sanne; Nieboer, Anna P

2013-03-01

This cross-sectional study (conducted in April-May 2011) explored associations between partnership functioning synergy and sustainability of innovative programmes in community care. The study sample consisted of 106 professionals (of 244 individuals contacted) participating in 21 partnerships that implemented different innovative community care programmes in Rotterdam, The Netherlands. Partnership functioning was evaluated by assessing leadership, resources administration and efficiency. Synergy was considered the proximal outcome of partnership functioning, which, in turn, influenced the achievement of programme sustainability. On a 5-point scale of increasing sustainability, mean sustainability scores ranged from 1.9 to 4.9. The results of the regression analysis demonstrated that sustainability was positively influenced by leadership (standardised regression coefficient β = 0.32; P < 0.001) and non-financial resources (β = 0.25; P = 0.008). No significant relationship was found between administration or efficiency and programme sustainability. Partnership synergy acted as a mediator for partnership functioning and significantly affected sustainability (β = 0.39; P < 0.001). These findings suggest that the sustainability of innovative programmes in community care is achieved more readily when synergy is created between partners. Synergy was more likely to emerge with boundary-spanning leaders, who understood and appreciated partners' different perspectives, and could bridge their diverse cultures and were comfortable sharing ideas, resources and power. In addition, the acknowledgement of and ability to use members' resources were found to be valuable in engaging partners' involvement and achieving synergy in community care partnerships. © 2012 Blackwell Publishing Ltd.

Tuberculosis control in Asia and the western Pacific: a role for computer modelling.

PubMed

Brewer, T F; Heymann, S J; Harris, J B

1997-09-01

Despite the availability of effective treatment, tuberculosis (TB) causes more deaths than any other infection. Most of the world's TB cases and deaths occur in Asia and the Western Pacific, and the growing prevalence of multiple drug-resistant TB and the spread of human immunodeficiency virus (HIV) present ever greater obstacles to effective TB control. The management of TB remains difficult, and epidemiologic studies to assess control programmes require significant time and expense and may not be generalizable to other regions. Computer models are powerful and relatively inexpensive tools for rapidly planning and evaluating TB control strategies. Models have demonstrated the value of targeted chemoprophylaxis strategies for the prevention of TB among HIV-infected individuals, and programmes to ensure that all HIV-infected individuals receive TB chemoprophylaxis should be considered in Asia and the Western Pacific. Though directly observed therapy (DOT) is effective when designed to be attractive to patients, modelling has shown that DOT, if poorly accepted by patients, may lead to fewer patients seeking care and thus to paradoxical rises in TB case rates. Models may be used to make accurate predictions of TB morbidity and programme costs using local epidemiologic and demographic inputs. The use of models in Asia and the Western Pacific offers a low-cost way to compare programmes, to improve the evaluation of programmes, to project future cases, and to examine programme needs while providing insights into TB control helpful to countries in and out of the region.

Research on laser detonation pulse circuit with low-power based on super capacitor

NASA Astrophysics Data System (ADS)

Wang, Hao-yu; Hong, Jin; He, Aifeng; Jing, Bo; Cao, Chun-qiang; Ma, Yue; Chu, En-yi; Hu, Ya-dong

2018-03-01

According to the demand of laser initiating device miniaturization and low power consumption of weapon system, research on the low power pulse laser detonation circuit with super capacitor. Established a dynamic model of laser output based on super capacitance storage capacity, discharge voltage and programmable output pulse width. The output performance of the super capacitor under different energy storage capacity and discharge voltage is obtained by simulation. The experimental test system was set up, and the laser diode of low power pulsed laser detonation circuit was tested and the laser output waveform of laser diode in different energy storage capacity and discharge voltage was collected. Experiments show that low power pulse laser detonation based on super capacitor energy storage circuit discharge with high efficiency, good transient performance, for a low power consumption requirement, for laser detonation system and low power consumption and provide reference light miniaturization of engineering practice.

Spacecraft solid state power distribution switch

NASA Technical Reports Server (NTRS)

Praver, G. A.; Theisinger, P. C.

1986-01-01

As a spacecraft performs its mission, various loads are connected to the spacecraft power bus in response to commands from an on board computer, a function called power distribution. For the Mariner Mark II set of planetary missions, the power bus is 30 volts dc and when loads are connected or disconnected, both the bus and power return side must be switched. In addition, the power distribution function must be immune to single point failures and, when power is first applied, all switches must be in a known state. Traditionally, these requirements have been met by electromechanical latching relays. This paper describes a solid state switch which not only satisfies the requirements but incorporates several additional features including soft turn on, programmable current trip point with noise immunity, instantaneous current limiting, and direct telemetry of load currents and switch status. A breadboard of the design has been constructed and some initial test results are included.

Real time test bed development for power system operation, control and cyber security

NASA Astrophysics Data System (ADS)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

Eye vision system using programmable micro-optics and micro-electronics

NASA Astrophysics Data System (ADS)

Riza, Nabeel A.; Amin, M. Junaid; Riza, Mehdi N.

2014-02-01

Proposed is a novel eye vision system that combines the use of advanced micro-optic and microelectronic technologies that includes programmable micro-optic devices, pico-projectors, Radio Frequency (RF) and optical wireless communication and control links, energy harvesting and storage devices and remote wireless energy transfer capabilities. This portable light weight system can measure eye refractive powers, optimize light conditions for the eye under test, conduct color-blindness tests, and implement eye strain relief and eye muscle exercises via time sequenced imaging. Described is the basic design of the proposed system and its first stage system experimental results for vision spherical lens refractive error correction.

DEMONSTRATION AND TESTING OF AN EER OPTIMIZER SYSTEM FOR DX AIR-CONDITIONERS

DTIC Science & Technology

2017-10-07

Performance-Based Maintenance PCS Power Current Sensor PLC Programmable Logic Controller ppm Parts Per Million PSIG Pounds per Square Inch Gauge PVS Power...all utilities and facilities at Patrick AFB, Cape Canaveral AFS, Jonathan Dickinson Military Tracking Annex, Malabar Annex, Ramey Solar Observatory...Cost 8,057 0 Annual O&M Cost 453 1191 Annual FD&D Monitoring 880 ‐ BLCC LIFE CYCLE RESULTS Energy Savings $12,317 O&M Net Savings $493 PV  Life Cycle

Upset Characterization of the PowerPC405 Hard-core Processor Embedded in Virtex-II Pro Field Programmable Gate Arrays

NASA Technical Reports Server (NTRS)

Swift, Gary M.; Allen, Gregory S.; Farmanesh, Farhad; George, Jeffrey; Petrick, David J.; Chayab, Fayez

2006-01-01

Shown in this presentation are recent results for the upset susceptibility of the various types of memory elements in the embedded PowerPC405 in the Xilinx V2P40 FPGA. For critical flight designs where configuration upsets are mitigated effectively through appropriate design triplication and configuration scrubbing, these upsets of processor elements can dominate the system error rate. Data from irradiations with both protons and heavy ions are given and compared using available models.

A new multiprogrammable isotopic powered cardiac pacemaker

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smyth, N.P.; Purdy, D.L.; Sager, D.

1982-09-01

A new multiprogrammable, isotopic-powered cardiac pacemaker was implanted in six patients as a custom device. Five were initial implants and one was a replacement. The patients were studied for up to two years. In five of the six cases it was found advantageous to change one of the programmable parameters. Multiprogrammability is obviously as important in an isotopic pulse generator as in a lithium unit, if not more so, because of the unit's greater longevity. Further studies are continuing in an FDA approved clinical trial.

Evaluating the Information Power Grid using the NAS Grid Benchmarks

NASA Technical Reports Server (NTRS)

VanderWijngaartm Rob F.; Frumkin, Michael A.

2004-01-01

The NAS Grid Benchmarks (NGB) are a collection of synthetic distributed applications designed to rate the performance and functionality of computational grids. We compare several implementations of the NGB to determine programmability and efficiency of NASA's Information Power Grid (IPG), whose services are mostly based on the Globus Toolkit. We report on the overheads involved in porting existing NGB reference implementations to the IPG. No changes were made to the component tasks of the NGB can still be improved.

Journal of the Royal Naval Scientific Service. Volume 29, Number 5

DTIC Science & Technology

1974-09-01

of Research Materials 1 Mr. H. L. R. Hinkley Defence Research Information Centre Mr. R. V. Aired Head, Resources and Programmes A Mr. D. J...the magnetron with its very great output (flypower to elephant power ) started before the war. I think it was a paper by Dempsey in the Journal of the...were both very strongly in favour and most helpful. In due course our hopes for various powerful transmitters was achieved as the result of Randall

Extending Your Reach.

ERIC Educational Resources Information Center

Batterman, Christopher T.

2002-01-01

High-density mobile storage (storage units mounted on carriages and rails which move and compact to utilize wasted space) can double the capacity of an existing school library facility. This article describes the benefits of going mobile and looks at the advantages of powered, programmable mobile storage systems. A sidebar describes Michigan…

The Utility of Handheld Programmable Calculators in Aircraft Life Cycle Cost Estimation.

DTIC Science & Technology

1982-09-01

are available for extended mem - ory, hardcopy printout, video interface, and special application software. Any calculator of comparable memory could...condi- tioning system. OG Total number of engine, air turbine motor (ATM) and auxiliary power unit (APU) driven generator/alternators. OHP Total number

Implementing Participatory Research with an Urban American Indian Community: Lessons Learned

ERIC Educational Resources Information Center

Roberts, Erica B.; Jette, Shannon L.

2016-01-01

Objective: Participatory research has proven an effective method for improving health equity among American Indians/Alaska Natives (AI/ANs) by addressing power imbalances between communities and researchers, incorporating community knowledge and theory, ensuring mutual benefit and improving community capacity and programme sustainability. However,…

Selection of magister learners in nursing science at the Rand Afrikaans University.

PubMed

Botes, A

2001-05-01

Selection of learners implies that candidates are assessed according to criteria with the purpose of selecting the most suitable learners for the course. A magister qualification is on level 8A of the National Qualifications Framework (NQF). The purpose of a magister qualification in Nursing is the development of advanced research, clinical, professional, managerial, educational, leadership and consultative abilities (knowledge, skills, values and attitudes) for the promotion of individual, family, group and community health. From the above introduction it becomes clear that there is a high expectations of a person with a magister qualification. Such a person should be a specialist, scientist, leader and role model in the profession. A magister programme is human-power intensive as well as capital intensive for both the learner and higher education institutions. It is therefore important to select learners with the ability to achieve the outcomes of the programme. Limited research has been conducted on the selection of post graduate learners. This leads to the question whether the current selection criteria (undergraduate mark and the mark in Research Methodology) are reasonable predictors of success for the magister programmes. In order to answer this question, hypotheses with the following variables were formulated. Achievement/success in the magister programme as reflected by The mark for the dissertation or mini-dissertation. The level of input by the supervisor during the magister programme. The quality of the research article reflecting the research in the magister programme. Undergraduate mark Mark for Research Methodology In order to test the hypotheses a quantitative correlation design was used incorporating documented data of 74 magister graduates. Descriptive and inferential data analysis (Pearson's correlation coefficient, ANOVA and multivariate test) were used. The findings showed Research Methodology to be the best indicator of success in the magister programmes.

[Centralized immunization schedules and regional equity of access: an audit among Apulian healthcare workers].

PubMed

Tafuri, S; Martinelli, D; Caputi, G; Fortunato, F; Germinario, C; Prato, R

2009-01-01

The reform of the Vth Title of the Italian Constitution has given the Regions autonomous power over planning of their immunization programme and immunization calendar. This amendment has federalized Italy's vaccination system and, is justified by epidemiological evidence however casts doubt on its provision of equal rights to health care. The objective of this current study is to gain insight into the opinion of vaccine services officers in the Apulia region on federal immunization and the regional immunization programme. Research was conducted using an anonymous standardized questionnaire to which 302 vaccines services staff responded. 67.4% of respondents believe that the current federal vaccination programme should be maintained, whilst 20.2% believe that the current system should be eradicated and 12.4% believe it should be phased out gradually. The current apulian vaccination calendar provides free and active immunizations for all newborns for the pneumococcal, meningitis C, chickenpox and hepatitis A vaccines. The interviewees believe that the vaccinations provided in the regional immunization programme are very important (average importance out of 10 = 6.1/7). The positive response to the regional vaccination plan given by the health officers explains, at least in part, the conservative attitude tewards federal vaccination plans. It cannot be excluded that sacrificing regional autonomy over vaccination programmes might be considered by the vaccination officers as being responsible for the abandonment of the Region's long established immunization practices. The success of these practices is evident in the case of the Region's Hepatitis A immunization programme where the active provision of this vaccine has drastically reduced the endemicity of the illness in Apulia. These experiences of good practice should be adequately considered in before opting to phase out the current immunisation programme.

Extended Logic Intelligent Processing System for a Sensor Fusion Processor Hardware

NASA Technical Reports Server (NTRS)

Stoica, Adrian; Thomas, Tyson; Li, Wei-Te; Daud, Taher; Fabunmi, James

2000-01-01

The paper presents the hardware implementation and initial tests from a low-power, highspeed reconfigurable sensor fusion processor. The Extended Logic Intelligent Processing System (ELIPS) is described, which combines rule-based systems, fuzzy logic, and neural networks to achieve parallel fusion of sensor signals in compact low power VLSI. The development of the ELIPS concept is being done to demonstrate the interceptor functionality which particularly underlines the high speed and low power requirements. The hardware programmability allows the processor to reconfigure into different machines, taking the most efficient hardware implementation during each phase of information processing. Processing speeds of microseconds have been demonstrated using our test hardware.

Self sufficient wireless transmitter powered by foot-pumped urine operating wearable MFC.

PubMed

Taghavi, M; Stinchcombe, A; Greenman, J; Mattoli, V; Beccai, L; Mazzolai, B; Melhuish, C; Ieropoulos, I A

2015-12-10

The first self-sufficient system, powered by a wearable energy generator based on microbial fuel cell (MFC) technology is introduced. MFCs made from compliant material were developed in the frame of a pair of socks, which was fed by urine via a manual gaiting pump. The simple and single loop cardiovascular fish circulatory system was used as the inspiration for the design of the manual pump. A wireless programmable communication module, engineered to operate within the range of the generated electricity, was employed, which opens a new avenue for research in the utilisation of waste products for powering portable as well as wearable electronics.

India takes nuclear path to go green

NASA Astrophysics Data System (ADS)

Bagla, Pallava

2009-11-01

Manmohan Singh, the prime minister of India, last month announced a major new emphasis on nuclear power that could see the country generate as much as 470GW of power from nuclear reactors by 2050. Speaking at the opening of the International Conference on Peaceful Uses of Atomic Energy in New Dehli, Singh said that the programme would sharply reduce India's dependence on fossil fuels and be a "major contribution" to global efforts to combat climate change. "If we use the power of the atom wisely for the universal good, the possibilities are unbounded," he said. However, even with this capacity, nuclear power would still only account for 25% of India's energy mix, with the bulk of the rest coming from coal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potts, C.; Faber, M.; Gunderson, G.

The as-built lattice of the Rapid Cycling Synchrotron (RCS) had two sets of correction sextupoles and two sets of quadrupoles energized by dc power supplies to control the tune and the tune tilt. With this method of powering these magnets, adjustment of tune conditions during the accelerating cycle as needed was not possible. A set of dynamically programmable power supplies has been built and operated to provide the required chromaticity adjustment. The short accelerating time (16.7 ms) of the RCS and the inductance of the magnets dictated large transistor amplifier power supplies. The required time resolution and waveform flexibility indicatedmore » the desirability of computer control. Both the amplifiers and controls are described, along with resulting improvements in the beam performance. 5 refs.« less

Inclusiveness, Power Sharing and Critical Enquiry: Intercultural Programme Model for New Settlers

ERIC Educational Resources Information Center

Hayward, Maria; U-Mackey, Alice

2013-01-01

Migrants and refugees settling permanently in a new country face significant social, linguistic and cultural challenges. However, they also bring intercultural strengths and skills which, if acknowledged and enhanced, can support successful settlement and inclusion in a pluralistic society. This paper describes the underpinning rationale and…

The Art of Electronics

NASA Astrophysics Data System (ADS)

Horowitz, Paul; Hill, Winfield

2015-04-01

1. Foundations; 2. Bipolar transistors; 3. Field effect transistors; 4. Operational amplifiers; 5. Precision circuits; 6. Filters; 7. Oscillators and timers; 8. Low noise techniques and transimpedance; 9. Power regulation; 10. Digital electronics; 11. Programmable logic devices; 12. Logical interfacing; 13. Digital meets analog; 14. Computers, controllers, and data links; 15. Microcontrollers.

Programmable random interval generator

NASA Technical Reports Server (NTRS)

Lindsey, R. S., Jr.

1973-01-01

Random pulse generator can supply constant-amplitude randomly distributed pulses with average rate ranging from a few counts per second to more than one million counts per second. Generator requires no high-voltage power supply or any special thermal cooling apparatus. Device is uniquely versatile and provides wide dynamic range of operation.

A qualitative evaluation of a pilot leadership programme for dentists.

PubMed

Walsh, Jonathan; Taylor, Nicholas; Hough, Donna; Brocklehurst, Paul

2015-07-06

The purpose of this paper was to evaluate a pilot training programme run by Health Education North West to promote clinical leadership amongst general dental practitioners (GDPs). New powers and responsibilities for clinicians have caused a fundamental shift in the way that local services are planned and delivered in England. GDPs are being appointed onto the boards of local professional networks (LPNs) to influence the way that services are delivered at a local level. Analogous to clinical commissioning groups in medicine, the role of LPNs is to ensure that GDPs lead change and drive up the quality of service provision. Clinical leadership has been argued to be fundamentally important in these new structures, but has received little attention in the dental literature. Semi-structured interviews and a focus group were held with participants of the pilot to explore their understanding and experience of clinical leadership. These were recorded, transcribed verbatim and underwent thematic analysis. Nineteen codes were identified and organized into four themes: nature of clinical leadership, challenges for clinical leaders in dentistry, Leadership Exploration and Discovery programme evaluation and future direction. The research provides an understanding of how GDPs conceptualise clinical leadership and provides recommendations for future leadership training programmes. This is the first evaluation of a leadership programme for GDPs and so helps address the paucity of evidence in the dental literature.

The CRAF/Cassini power subsystem - Preliminary design update

NASA Technical Reports Server (NTRS)

Atkins, Kenneth L.; Brisendine, Philip; Clark, Karla; Klein, John; Smith, Richard

1991-01-01

A chronology is provided of the rationale leading from the early Mariner spacecraft to the CRAF/Cassini Mariner Mark II power subsystem architecture. The display pathway began with a hybrid including a solar photovoltaic array, a radioisotope thermoelectric generator (RTG), and a battery supplying a power profile with a peak loading of about 300 W. The initial concept was to distribute power through a new solid-state, programmable switch controlled by an embedded microprocessor. As the overall mission, science, and project design matured, the power requirements increased. The design evolved from the hybrid to two RTG plus batteries to meet peak loadings of near 500 W in 1989. Later that year, circumstances led to abandonment of the distributed computer concept and a return to centralized control. Finally, as power requirements continued to grow, a third RTG was added to the design and the battery removed, with the return to the discharge-controller for transients during fault recovery procedures.

Geothermal development in the Philippines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elizagaque, R.F.; Tolentino, B.S.

1982-06-01

The development of geothermal resources and energy in the Philippines is discussed. Philippine National Oil Company-Energy Development Corporation initiated the first semi-commercial generation of geothermal power in July 1977 with the installation of a 3MWe plant. By 1980 the country had 440 MWe on line at Mak-Ban and Tiwi. This placed the Philippines second after the US among countries using geothermal energy for power generation. Before the end of 1981, PNOC-EDC added 6 additional MWe of geothermal power generating capacity to increase the total to 446 MWe. As part of the five-year National Energy Development Programme covering the period 1981-1985,more » additional power plants will be installed in various project areas to increase the share of geothermal power generation from the present 9.8% to 18.6% of the nationwide power-generation total, or the equivalent of 16.6 million barrels of oil per year. (MJF)« less

Creaming and Parking in Quasi-Marketised Welfare-to-Work Schemes: Designed Out Of or Designed In to the UK Work Programme?

PubMed

Carter, Eleanor; Whitworth, Adam

2015-04-01

'Creaming' and 'parking' are endemic concerns within quasi-marketised welfare-to-work (WTW) systems internationally, and the UK's flagship Work Programme for the long-term unemployed is something of an international pioneer of WTW delivery, based on outsourcing, payment by results and provider flexibility. In the Work Programme design, providers' incentives to 'cream' and 'park' differently positioned claimants are intended to be mitigated through the existence of nine payment groups (based on claimants' prior benefit type) into which different claimants are allocated and across which job outcome payments for providers differ. Evaluation evidence suggests however that 'creaming' and 'parking' practices remain common. This paper offers original quantitative insights into the extent of claimant variation within these payment groups, which, contrary to the government's intention, seem more likely to design in rather than design out 'creaming' and 'parking'. In response, a statistical approach to differential payment setting is explored and is shown to be a viable and more effective way to design a set of alternative and empirically grounded payment groups, offering greater predictive power and value-for-money than is the case in the current Work Programme design.

Drug Delivery: Enabling Technology for Drug Discovery and Development. iPRECIO® Micro Infusion Pump: Programmable, Refillable, and Implantable

PubMed Central

Tan, Tsung; Watts, Stephanie W.; Davis, Robert Patrick

2011-01-01

Successful drug delivery using implantable pumps may be found in over 12,500 published articles. Their versatility in delivering continuous infusion, intermittent or complex infusion protocols acutely or chronically has made them ubiquitous in drug discovery and basic research. The recent availability of iPRECIO®, a programmable, refillable, and implantable infusion pump has made it possible to carry out quantitative pharmacology (PKPD) in single animals. When combined with specialized catheters, specific administration sites have been selected. When combined with radiotelemetry, the physiologic gold standard, more sensitive and powerful means of detecting drug induced therapeutic, and/or adverse effects has been possible. Numerous application examples are cited from iPRECIO® use in Japan, United States, and Europe with iPRECIO® as an enabling drug delivery device where the refillable and programmability functionality were key benefits. The ability to start/stop drug delivery and to have control periods prior dosing made it possible to have equivalent effects at a much lower dose than previously studied. Five different iPRECIO® applications are described in detail with references to the original work where the implantable, refillable, and programmable benefits are demonstrated with their different end-points. PMID:21863140

The power gap: freedom, power and mental illness.

PubMed

Kelly, Brendan D

2006-10-01

Up to one in four individuals in the US meet the diagnostic criteria for a mental illness in any given year and a significant proportion have severe or recurring illnesses (e.g. schizophrenia). Despite this prevalence, mental health services remain poorly funded, mental illness remains misunderstood and individuals with recurring illness are constrained to live lives characterized by isolation, under-employment, stigma and denial of rights. Here I examine the idea that this situation is attributable, at least in part, to the ways in which the freedom and power of the mentally ill are undermined by a range of factors, including: (i) dispersion of political power amongst interest groups, which, combined with the relatively wide distribution of the 'interest' of mental illness, has the paradoxical result that mental health interest groups do not command political power proportional to the number affected; (ii) systematic exclusion of the mentally ill from full participation in civic, social and political life (structural violence), resulting in a lack of emphasis on mental health on political agendas and the exclusion of certain policy options as possible responses and (iii) difficulties the mentally ill may experience recognizing or articulating their own needs the absence of effective health-care systems, and the absence of knowledge about alternative systems. I argue that the enhancement of individual agency is central to efforts to address this power gap, including: (i) rights-based approaches, involving the enhancement of national mental health legislation, improvement of advocacy, empowerment and guardianship processes and development of governance, accountability and quality procedures in mental health services; (ii) approaches based on enhancing direct political participation, including voter-registration programmes and development of larger, more effective interest groups and (iii) additional approaches, including increasing accountability throughout services, recognizing the effects of socio-political change on the context of care and adapting the concept of 'soft power' to strengthen advocacy programmes.

How an integrated change programme has accelerated the reduction in high hazard nuclear facilities at Sellafield

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mackintosh, Angela

For over five decades the Sellafield Site has been central to the UK's nuclear programme. Now operated by Sellafield Ltd, under the management of Parent Body Organisation Nuclear Management Partners (NMP), a consortium of URS Washington Division, AMEC and AREVA is focussed on the decommissioning of historical facilities. When Decommissioning commenced in the late 1980's the site focus at that time was on commercial reprocessing and waste management. Now through the implementation of a company change programme, emphasis has shifted towards accelerated risk and hazard reduction of degraded legacy plants with nuclear inventory whilst ensuring value for money for themore » customer, the Nuclear Decommissioning Authority. This paper will describe the management success by the Site owners in delivering a successful change programme. The paper will explain how the site has transitioned to the INPO Standard Nuclear Performance Model (SNPM) and how through the use of a change maturity matrix has contributed to the accelerated reduction in high risk high hazard nuclear facilities. The paper will explain in detail how the Decommissioning Programme Office has facilitated and coordinated the Governance and assured delivery of the change plan and how successful application of visual management has aided the communication of its progress. Finally, the paper will discuss how the Delivery Schedules have proved critical for presenting the change plan to Key Stakeholders, Government Owners and Powerful Regulators. Overall, this paper provides an insight into how a massive change programme is being managed within one of the world's highest regulated industries. (authors)« less

Radiation Mitigation and Power Optimization Design Tools for Reconfigurable Hardware in Orbit

NASA Technical Reports Server (NTRS)

French, Matthew; Graham, Paul; Wirthlin, Michael; Wang, Li; Larchev, Gregory

2005-01-01

The Reconfigurable Hardware in Orbit (RHinO)project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. In the second year of the project, design tools that leverage an established FPGA design environment have been created to visualize and analyze an FPGA circuit for radiation weaknesses and power inefficiencies. For radiation, a single event Upset (SEU) emulator, persistence analysis tool, and a half-latch removal tool for Xilinx/Virtex-II devices have been created. Research is underway on a persistence mitigation tool and multiple bit upsets (MBU) studies. For power, synthesis level dynamic power visualization and analysis tools have been completed. Power optimization tools are under development and preliminary test results are positive.

DNA-programmable nanoparticle crystallization.

PubMed

Park, Sung Yong; Lytton-Jean, Abigail K R; Lee, Byeongdu; Weigand, Steven; Schatz, George C; Mirkin, Chad A

2008-01-31

It was first shown more than ten years ago that DNA oligonucleotides can be attached to gold nanoparticles rationally to direct the formation of larger assemblies. Since then, oligonucleotide-functionalized nanoparticles have been developed into powerful diagnostic tools for nucleic acids and proteins, and into intracellular probes and gene regulators. In contrast, the conceptually simple yet powerful idea that functionalized nanoparticles might serve as basic building blocks that can be rationally assembled through programmable base-pairing interactions into highly ordered macroscopic materials remains poorly developed. So far, the approach has mainly resulted in polymerization, with modest control over the placement of, the periodicity in, and the distance between particles within the assembled material. That is, most of the materials obtained thus far are best classified as amorphous polymers, although a few examples of colloidal crystal formation exist. Here, we demonstrate that DNA can be used to control the crystallization of nanoparticle-oligonucleotide conjugates to the extent that different DNA sequences guide the assembly of the same type of inorganic nanoparticle into different crystalline states. We show that the choice of DNA sequences attached to the nanoparticle building blocks, the DNA linking molecules and the absence or presence of a non-bonding single-base flexor can be adjusted so that gold nanoparticles assemble into micrometre-sized face-centred-cubic or body-centred-cubic crystal structures. Our findings thus clearly demonstrate that synthetically programmable colloidal crystallization is possible, and that a single-component system can be directed to form different structures.

International education is a broken field: Can ubuntu education bring solutions?

NASA Astrophysics Data System (ADS)

Piper, Benjamin

2016-02-01

Ubuntu is an African philosophy of human kindness; applying it in the Global South would fundamentally alter the design of the education sector. This essay argues, however, that the field of international educational development is not, in fact, structured to support an education influenced by ubuntu ideals. Specifically, the educational development milieu includes donors, implementers and academicians who do not sufficiently question the power dynamics which underpin education development. This creates a field where the power imbalances between donors and host governments are not interrogated, where development workers place too much faith in their own knowledge rather than that of local education experts, and where development practitioners rarely appreciate the privilege of working in countries which are not their own. An ubuntu education would alter the educational development field in myriad critical ways, a few of which are suggested in this essay. Educational development programmes in universities and intake programmes for implementers and donors should teach officers humility, appreciating existing local talent and expertise. Donor programmes should incentivise reflective practice which formally embeds appreciation for local culture and expertise, thereby supporting structures which help educational development experts to review their metacognitive processes. The field should also dramatically increase the numbers of local, minority and female educational development practitioners and provide more avenues for advancement for those groups. These are activities which are critical to supporting the education development field, but require a fundamental change of attitude by practitioners to ensure the right kind of relationships between the West and the Global South.

Concept and realization of a fully configurable and programmable data-acquisition system for the neutron scattering instruments at SINQ

NASA Astrophysics Data System (ADS)

Greuter, U.; Buehler, C.; Rasmussen, P.; Emmenegger, M.; Maden, D.; Koennecke, M.; Schlumpf, N.

We present the basic concept and the realization of our fully configurable data-acquisition hardware for the neutron scattering instruments at SINQ. This system allows collection of the different data entities and event-related signals generated by the various detector units. It offers a variety of synchronization options, including a time-measuring mode for time-of-flight determinations. Based on configurable logic (FPGA, CPLD), event rates up to the MHz range can be processed and transmitted to a programmable online data-reduction system (Histogram Memory). It is implemented on a commercially available VME Power PC module running a real-time operating system (VxWorks).

Underground physics with DUNE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kudryavtsev, Vitaly A.

2016-06-09

The Deep Underground Neutrino Experiment (DUNE) is a project to design, construct and operate a next-generation long-baseline neutrino detector with a liquid argon (LAr) target capable also of searching for proton decay and supernova neutrinos. It is a merger of previous efforts of the LBNE and LBNO collaborations, as well as other interested parties to pursue a broad programme with a staged 40-kt LAr detector at the Sanford Underground Research Facility (SURF) 1300 km from Fermilab. This programme includes studies of neutrino oscillations with a powerful neutrino beam from Fermilab, as well as proton decay and supernova neutrino burst searches.more » In this study, we will focus on the underground physics with DUNE.« less

Aptazyme-embedded guide RNAs enable ligand-responsive genome editing and transcriptional activation

PubMed Central

Tang, Weixin; Hu, Johnny H.; Liu, David R.

2017-01-01

Programmable sequence-specific genome editing agents such as CRISPR-Cas9 have greatly advanced our ability to manipulate the human genome. Although canonical forms of genome-editing agents and programmable transcriptional regulators are constitutively active, precise temporal and spatial control over genome editing and transcriptional regulation activities would enable the more selective and potentially safer use of these powerful technologies. Here, by incorporating ligand-responsive self-cleaving catalytic RNAs (aptazymes) into guide RNAs, we developed a set of aptazyme-embedded guide RNAs that enable small molecule-controlled nuclease-mediated genome editing and small molecule-controlled base editing, as well as small molecule-dependent transcriptional activation in mammalian cells. PMID:28656978

Low Voltage Current-Reused Pseudo-Differential Programmable Gain Amplifier

NASA Astrophysics Data System (ADS)

Nguyen, Huy-Hieu; Lee, Jeong-Seon; Lee, Sang-Gug

This paper reports a current-reused pseudo-differential (CRPD) programmable gain amplifier (PGA) that demonstrates small size, low power, wide band, low noise, and high linearity operation with 4 control bits. Implemented in 0.18um CMOS technology, the PGA shows the gain range from -9.9 to 8.3dB with gain error of less than ±0.38dB. The IIP3, P1dB, and smallest 3-dB bandwidth are 10.5 to 27dBm, -9 to 9.5dBm, and 250MHz, respectively. The PGA occupies the chip area of 0.04mm2 and consumes only 460 µA from a 1.2V supply.

The Search for Life in the Universe: The Past Through the Future

NASA Astrophysics Data System (ADS)

Lebofsky, L. A.; Lebofsky, A.; Lebofsky, M.; Lebofsky, N. R.

2003-05-01

``Are we alone?" This is a question that has been asked by humans for thousands of years. More than any other topic in science, the search for life in the Universe has captured everyone's imagination. Now, for the first time in history, we are on the verge of answering this question. The search for life beyond the Earth can be seen as far back as the 16th century writings of J. Kepler, Bishops F. Godwin and J. Wilkins, and S. Cyrano de Bergerac to the early 20th century's H. G. Wells. From a scientific perspective, this search led to the formulation of the Drake Equation which in turn has led to a number of projects that are searching for signs of intelligent life beyond the Earth, the Search for Extraterrestrial Intellegence. SETI@home reaches millions of users, including thousands of K-12 teachers across the nation. We are developing a project that will enhance the SETI@home web site located at UC Berkeley. The project unites the resources of the SETI@home distributed computing community web site , university settings, and informal science learning centers. It will reach approximately 100,000 learners. The goal is to increase public understanding of math and science and to create and strengthen the connections between informal and formal learning communities. We will present a variety of ways that the Drake Equation and SETI@home can enhance the public and student understanding of the search for life in the Universe, from its roots in literature, to the development (and evolution) of the Drake Equation, to the actual search for life with SETI.

The ESO Diffuse Interstellar Band Large Exploration Survey (EDIBLES)

NASA Astrophysics Data System (ADS)

Cami, J.; Cox, N. L.; Farhang, A.; Smoker, J.; Elyajouri, M.; Lallement, R.; Bacalla, X.; Bhatt, N. H.; Bron, E.; Cordiner, M. A.; de Koter, A..; Ehrenfreund, P.; Evans, C.; Foing, B. H.; Javadi, A.; Joblin, C.; Kaper, L.; Khosroshahi, H. G.; Laverick, M.; Le Petit, F..; Linnartz, H.; Marshall, C. C.; Monreal-Ibero, A.; Mulas, G.; Roueff, E.; Royer, P.; Salama, F.; Sarre, P. J.; Smith, K. T.; Spaans, M.; van Loon, J. T..; Wade, G.

2018-03-01

The ESO Diffuse Interstellar Band Large Exploration Survey (EDIBLES) is a Large Programme that is collecting high-signal-to-noise (S/N) spectra with UVES of a large sample of O and B-type stars covering a large spectral range. The goal of the programme is to extract a unique sample of high-quality interstellar spectra from these data, representing different physical and chemical environments, and to characterise these environments in great detail. An important component of interstellar spectra is the diffuse interstellar bands (DIBs), a set of hundreds of unidentified interstellar absorption lines. With the detailed line-of-sight information and the high-quality spectra, EDIBLES will derive strong constraints on the potential DIB carrier molecules. EDIBLES will thus guide the laboratory experiments necessary to identify these interstellar “mystery molecules”, and turn DIBs into powerful diagnostics of their environments in our Milky Way Galaxy and beyond. We present some preliminary results showing the unique capabilities of the EDIBLES programme.

Two-dimensional non-volatile programmable p-n junctions

NASA Astrophysics Data System (ADS)

Li, Dong; Chen, Mingyuan; Sun, Zhengzong; Yu, Peng; Liu, Zheng; Ajayan, Pulickel M.; Zhang, Zengxing

2017-09-01

Semiconductor p-n junctions are the elementary building blocks of most electronic and optoelectronic devices. The need for their miniaturization has fuelled the rapid growth of interest in two-dimensional (2D) materials. However, the performance of a p-n junction considerably degrades as its thickness approaches a few nanometres and traditional technologies, such as doping and implantation, become invalid at the nanoscale. Here we report stable non-volatile programmable p-n junctions fabricated from the vertically stacked all-2D semiconductor/insulator/metal layers (WSe2/hexagonal boron nitride/graphene) in a semifloating gate field-effect transistor configuration. The junction exhibits a good rectifying behaviour with a rectification ratio of 104 and photovoltaic properties with a power conversion efficiency up to 4.1% under a 6.8 nW light. Based on the non-volatile programmable properties controlled by gate voltages, the 2D p-n junctions have been exploited for various electronic and optoelectronic applications, such as memories, photovoltaics, logic rectifiers and logic optoelectronic circuits.

Two-dimensional non-volatile programmable p-n junctions.

PubMed

Li, Dong; Chen, Mingyuan; Sun, Zhengzong; Yu, Peng; Liu, Zheng; Ajayan, Pulickel M; Zhang, Zengxing

2017-09-01

Semiconductor p-n junctions are the elementary building blocks of most electronic and optoelectronic devices. The need for their miniaturization has fuelled the rapid growth of interest in two-dimensional (2D) materials. However, the performance of a p-n junction considerably degrades as its thickness approaches a few nanometres and traditional technologies, such as doping and implantation, become invalid at the nanoscale. Here we report stable non-volatile programmable p-n junctions fabricated from the vertically stacked all-2D semiconductor/insulator/metal layers (WSe 2 /hexagonal boron nitride/graphene) in a semifloating gate field-effect transistor configuration. The junction exhibits a good rectifying behaviour with a rectification ratio of 10 4 and photovoltaic properties with a power conversion efficiency up to 4.1% under a 6.8 nW light. Based on the non-volatile programmable properties controlled by gate voltages, the 2D p-n junctions have been exploited for various electronic and optoelectronic applications, such as memories, photovoltaics, logic rectifiers and logic optoelectronic circuits.

We can cure your child's clumsiness! A review of intervention methods.

PubMed

Sigmundsson, H; Pedersen, A V; Whiting, H T; Ingvaldsen, R P

1998-06-01

Intervention procedures for treatment of clumsiness have come in many guises. We have looked at some of the most powerful methods put forward in the past 30 years--Perceptual-motor training (PMT), Sensory Integration Therapy (SIT), and some promising new approaches. Both the PMT and the SIT have been heavily criticised. It is hard to find support for the idea that the programmes improve academic skills or that they have more than a limited effect on perceptual-motor development as claimed. The more recently introduced Kinaesthetic training is shown to have an effect on general motor competence but that this may be better explained in terms of the general principles on which this training procedure lies rather than the influence on Kinaesthesis per se. Since other recent studies have also shown a dependence on similar general principles, it might be asked whether it is the teacher rather than the programmes that accounts for the differences shown between different intervention programmes.

A combined drama-based and CBT approach to working with self-reported anger aggression.

PubMed

Blacker, Janine; Watson, Andy; Beech, Anthony R

2008-01-01

A drama-based programme, called 'Insult to Injury', was designed to explore the processes of anger, aggression and violence. The aim of the programme was to enable offenders to identify and generate strategies and skills for dealing with potentially volatile situations, and to provide a safe and supportive environment in which to practice and evaluate these strategies. AIMS An active drama-based approach combined with cognitive-behavioural techniques was used to explore issues such as masculinity, power and control, pride and shame and victim awareness. Reductions in anger were hypothesized. METHOD A single group pre/post design assessed the levels of anger before and after the course. RESULTS Sixty-two adult male offenders from six prison establishments in the UK took part in the nine-day course. As hypothesised, significant reductions in anger were found in pre- to post-course assessment. These results suggest that a drama-based approach may be a promising adjunct to traditional anger management programmes for violent offenders.

Programmable Pulse Generator for Aditya Gas Puffing System

NASA Astrophysics Data System (ADS)

Patel, Narendra; Chavda, Chhaya; Bhatt, S. B.; Chattopadhyay, Prabal; Saxena, Y. C.

2012-11-01

In the Aditya Tokamak, one of primary requirement for plasma generation is to feed the required quantity of the fuel gas prior to plasma shot. Gas feed system mainly consists of piezoelectric gas leak valve and gas reservoir. The Hydrogen gas is prior to 300ms loop voltage for the duration of 4 msec to 7 msec. Gas is puffed during the shot for required plasma parameters and to increase plasma density using the same system. The valve is controlled by either continuous voltage or pulses of different width, amplitude and delay with respect to loop voltage. These voltage pulses are normally applied through standard pulse generator. The standard pulse generator is replaced by micro controller based in housed developed programmable pulse generator system consists of in built power supply, BNC input for external trigger, BNC output and serial interface. This programmable pulse generator is successfully tested and is in operation for gas puffing during ADITYA Tokamak experiments. The paper discusses the design and development aspect of the system.

Digitally Programmable Analogue Circuits for Sensor Conditioning Systems

PubMed Central

Zatorre, Guillermo; Medrano, Nicolás; Sanz, María Teresa; Aldea, Concepción; Calvo, Belén; Celma, Santiago

2009-01-01

This work presents two current-mode integrated circuits designed for sensor signal preprocessing in embedded systems. The proposed circuits have been designed to provide good signal transfer and fulfill their function, while minimizing the load effects due to building complex conditioning architectures. The processing architecture based on the proposed building blocks can be reconfigured through digital programmability. Thus, sensor useful range can be expanded, changes in the sensor operation can be compensated for and furthermore, undesirable effects such as device mismatching and undesired physical magnitudes sensor sensibilities are reduced. The circuits were integrated using a 0.35 μm standard CMOS process. Experimental measurements, load effects and a study of two different tuning strategies are presented. From these results, system performance is tested in an application which entails extending the linear range of a magneto-resistive sensor. Circuit area, average power consumption and programmability features allow these circuits to be included in embedded sensing systems as a part of the analogue conditioning components. PMID:22412331

Static power reduction for midpoint-terminated busses

DOEpatents

Coteus, Paul W [Yorktown Heights, NY; Takken, Todd [Brewster, NY

2011-01-18

A memory system is disclosed which is comprised of a memory controller and addressable memory devices such as DRAMs. The invention provides a programmable register to control the high vs. low drive state of each bit of a memory system address and control bus during periods of bus inactivity. In this way, termination voltage supply current can be minimized, while permitting selected bus bits to be driven to a required state. This minimizes termination power dissipation while not affecting memory system performance. The technique can be extended to work for other high-speed busses as well.

Programmable Multiple-Ramped-Voltage Power Supply

NASA Technical Reports Server (NTRS)

Ajello, Joseph M.; Howell, S. K.

1993-01-01

Ramp waveforms range up to 2,000 V. Laboratory high-voltage power-supply system puts out variety of stable voltages programmed to remain fixed with respect to ground or float with respect to ramp waveform. Measures voltages it produces with high resolution; automatically calibrates, zeroes, and configures itself; and produces variety of input/output signals for use with other instruments. Developed for use with ultraviolet spectrometer. Also applicable to control of electron guns in general and to operation of such diverse equipment used in measuring scattering cross sections of subatomic particles and in industrial electron-beam welders.

Microcomputer technology applications: Charger and regulator software for a breadboard programmable power processor

NASA Technical Reports Server (NTRS)

Green, D. M.

1978-01-01

Software programs are described, one which implements a voltage regulation function, and one which implements a charger function with peak-power tracking of its input. The software, written in modular fashion, is intended as a vehicle for further experimentation with the P-3 system. A control teleprinter allows an operator to make parameter modifications to the control algorithm during experiments. The programs require 3K ROM and 2K ram each. User manuals for each system are included as well as a third program for simple I/O control.

Powering the future - a new generation of high-performance solar arrays

NASA Astrophysics Data System (ADS)

Geyer, Freddy; Caswell, Doug; Signorini, Carla

2007-08-01

Funded by ESA's Advanced Research in Telecommunication (ARTES) programme, Thales Alenia Space has developed a new generation of high-power ultra-lightweight solar arrays for telecommunications satellites. Thanks to close cooperation with its industrial partners in Europe, the company has generically qualified a solar array io meet market needs. Indeed, three flight projects were already using the new design as qualification was completed. In addition, the excellent mechanical and thermal behaviour of the new panel structure are contributing to other missions such as Pleïades and LISA Pathfinder.

Educators' Expectations and Aspirations around Young Children's Mathematical Knowledge

ERIC Educational Resources Information Center

Perry, Bob; MacDonald, Amy

2015-01-01

Let's Count is a mathematics professional learning programme for preschool educators in Australia, managed by a prominent non-government organisation and sponsored by industry. It has been implemented in both face-to-face and online modes over 2013/14. Let's Count is based on the constructs that all young children are powerful mathematicians and…

Preservice Teachers' Inquiry in a Professional Development School Context: Implications for the Practicum

ERIC Educational Resources Information Center

Mule, Lucy

2006-01-01

Professional development school (PDS) contexts are increasingly being viewed as powerful sites for the preparation of future teachers in the USA. One of their documented strengths is in the fostering of preservice teachers' inquiry within collaborative frameworks that result from the partnerships between university teacher education programmes and…

Empowering or Disabling? Emotional Reactions to Assessment amongst Part-Time Adult Students

ERIC Educational Resources Information Center

Cramp, Andy; Lamond, Catherine; Coleyshaw, Liz; Beck, Sue

2012-01-01

This article focuses on emotional reactions to learning and assessment. It draws on a qualitative research project involving first-generation adult students on a foundation degree programme. Endorsing the notion of emotional reactions as situated in participants' lived power relations, we map out emotional patterns to Semester 1 and then explore…

Solid-state NMR imaging system

DOEpatents

Gopalsami, Nachappa; Dieckman, Stephen L.; Ellingson, William A.

1992-01-01

An apparatus for use with a solid-state NMR spectrometer includes a special imaging probe with linear, high-field strength gradient fields and high-power broadband RF coils using a back projection method for data acquisition and image reconstruction, and a real-time pulse programmer adaptable for use by a conventional computer for complex high speed pulse sequences.

Reading Stars. 2013 Report

ERIC Educational Resources Information Center

National Literacy Trust, 2013

2013-01-01

The National Literacy Trust's Premier League Reading Stars has now been running for 10 years. During this time, hundreds of thousands of children and families have been inspired by the power of football to develop a love of reading. Although the programme has grown and evolved over this period, the premise remains the same: harnessing the…

Chinese Language Education in Europe: The Confucius Institutes

ERIC Educational Resources Information Center

Starr, Don

2009-01-01

This article explores the background to the Chinese government's decision to embark on a programme of promoting the study of Chinese language and culture overseas. This includes the impact of Joseph Nye's concept of "soft power" in China, ownership of the national language, the Confucius connection, and how these factors interact with…

The OECD PISA Study as a Soft Power in Education? Lessons from Switzerland and the US

ERIC Educational Resources Information Center

Bieber, Tonia; Martens, Kerstin

2011-01-01

Although originally created for economic purposes, the Organisation for Economic Co-Operation and Development (OECD) has increasingly gained weight in education policy in recent years and is now regarded as an international authority in the field, particularly through its "Programme for International Student Assessment" (PISA), which was…

The Power of Scripting: DGS Meets Programming

ERIC Educational Resources Information Center

Richter-Gebert, Jürgen; Kortenkamp, Ulrich

2010-01-01

In this article we demonstrate how the combination of a system for dynamic geometry with a freely programmable scripting environment can be advantageously used in teaching and research. We explain the reasons behind various design decisions that were made by us when designing the language "CindyScript" and give examples that proof how…

How to Use Color Displays Effectively: The Elements of Color Vision and Their Implications for Programmers.

ERIC Educational Resources Information Center

Durrett, John; Trezona, Judi

1982-01-01

Discusses physiological and psychological aspects of color. Includes guidelines for using color effectively, especially in the development of computer programs. Indicates that if applied with its limitations and requirements in mind, color can be a powerful manipulator of attention, memory, and understanding. (Author/JN)

Embracing the Complexity of Educational Programmes

ERIC Educational Resources Information Center

Govers, Elly

2016-01-01

Systems of monitoring and control have left many educators and organisations in the field of post-compulsory education struggling to find ways to meet the needs of an increasingly diverse society. Education is complex. Many educators would agree that it is influenced by many, often contradictory, voices and power structures. Based on the findings…

Imagining Powerful Co-Operative Schools: Theorising Dynamic Co-Operation with Spinoza

ERIC Educational Resources Information Center

Dennis, Joanna

2018-01-01

The recent expansion of the English academies programme has initiated a period of significant change within the state education system. As established administration has been disrupted, new providers from business and philanthropy have entered the sector with a range of approaches to transform schools. This paper examines the development of…

Compact fusion energy based on the spherical tokamak

NASA Astrophysics Data System (ADS)

Sykes, A.; Costley, A. E.; Windsor, C. G.; Asunta, O.; Brittles, G.; Buxton, P.; Chuyanov, V.; Connor, J. W.; Gryaznevich, M. P.; Huang, B.; Hugill, J.; Kukushkin, A.; Kingham, D.; Langtry, A. V.; McNamara, S.; Morgan, J. G.; Noonan, P.; Ross, J. S. H.; Shevchenko, V.; Slade, R.; Smith, G.

2018-01-01

Tokamak Energy Ltd, UK, is developing spherical tokamaks using high temperature superconductor magnets as a possible route to fusion power using relatively small devices. We present an overview of the development programme including details of the enabling technologies, the key modelling methods and results, and the remaining challenges on the path to compact fusion.

Welfarism versus 'free enterprise': considerations of power and justice in the Philippine healthcare system.

PubMed

Sy, Peter A

2003-10-01

The just distribution of benefits and burdens of healthcare, at least in the contemporary Philippine context, is an issue that gravitates towards two opposing doctrines of welfarism and 'free enterprise.' Supported largely by popular opinion, welfarism maintains that social welfare and healthcare are primarily the responsibility of the government. Free enterprise (FE) doctrine, on the other hand, maintains that social welfare is basically a market function and that healthcare should be a private industry that operates under competitive conditions with minimal government control. I will examine the ethical implications of these two doctrines as they inform healthcare programmes by business and government, namely: (a) the Devolution of Health Services and (b) the Philippine Health Maintenance Organization (HMO). I will argue that these doctrines and the health programmes they inform are deficient in following respects: (1) equitable access to healthcare, (2) individual needs for premium healthcare, (3) optimal utilisation of health resources, and (4) the equitable assignment of burdens that healthcare entails. These respects, as considerations of justice, are consistent with an operational definition of 'power' proposed here as 'access to and control of resources.'

Design of transient light signal simulator based on FPGA

NASA Astrophysics Data System (ADS)

Kang, Jing; Chen, Rong-li; Wang, Hong

2014-11-01

A design scheme of transient light signal simulator based on Field Programmable gate Array (FPGA) was proposed in this paper. Based on the characteristics of transient light signals and measured feature points of optical intensity signals, a fitted curve was created in MATLAB. And then the wave data was stored in a programmed memory chip AT29C1024 by using SUPERPRO programmer. The control logic was realized inside one EP3C16 FPGA chip. Data readout, data stream cache and a constant current buck regulator for powering high-brightness LEDs were all controlled by FPGA. A 12-Bit multiplying CMOS digital-to-analog converter (DAC) DAC7545 and an amplifier OPA277 were used to convert digital signals to voltage signals. A voltage-controlled current source constituted by a NPN transistor and an operational amplifier controlled LED array diming to achieve simulation of transient light signal. LM3405A, 1A Constant Current Buck Regulator for Powering LEDs, was used to simulate strong background signal in space. Experimental results showed that the scheme as a transient light signal simulator can satisfy the requests of the design stably.

Design of high-voltage, high-power, solid state remote power controllers for aerospace applications

NASA Technical Reports Server (NTRS)

Sturman, J. C.

1985-01-01

Two general types of remote power controllers (RPC's), which combine the functions of a circuit breaker and a switch, were developed for use in dc aerospace systems. Power-switching devices used in the designs are the gate-turnoff thyristor (GTO) and MOSFET. The RPC's can switch dc voltages to 1200 V and currents to 1000 A. Seven different units were constructed and subjected to laboratory and thermal vacuum testing. Two of these were dual units that switch both positive and negative voltages simultaneously. The RPC's using MOSFET's have slow turnon and turnoff times which limit surge currents and voltage spiking from high di/dt. The GTO's have much faster transition times. All RPC's have programmable overload tripout proportional to I sq T and microsecond tripout for large overloads.

Design of high-voltage, high-power, solid state remote power controllers for aerospace applications

NASA Astrophysics Data System (ADS)

Sturman, J. C.

1985-05-01

Two general types of remote power controllers (RPC's), which combine the functions of a circuit breaker and a switch, were developed for use in dc aerospace systems. Power-switching devices used in the designs are the gate-turnoff thyristor (GTO) and MOSFET. The RPC's can switch dc voltages to 1200 V and currents to 1000 A. Seven different units were constructed and subjected to laboratory and thermal vacuum testing. Two of these were dual units that switch both positive and negative voltages simultaneously. The RPC's using MOSFET's have slow turnon and turnoff times which limit surge currents and voltage spiking from high di/dt. The GTO's have much faster transition times. All RPC's have programmable overload tripout proportional to I sq T and microsecond tripout for large overloads.

Silica problem in the design of geothermal power plants

NASA Astrophysics Data System (ADS)

Dipippo, R.

1985-02-01

The silica problem is examined from the perspective of the power plant designer to develop a procedure to enable a quick estimate to be made of the potential seriousness of the silica deposition problem for a wide variety of resources and for selected types of power plant. The method employs correlations for the equilibrium solubilities of quartz and amorphous silica and for the saturated liquid enthalpy and the latent heat of water substance. Single- and double-flash plants optimized for highest thermodynamic efficiency are considered. Binary-type plants are included generically without mention of cycle specifics. The results are presented both graphically and in tabular form, and the governing equations will be given in an easily-programmable form.

Geothermal projects funded under the NER 300 programme - current state of development and knowledge gained

NASA Astrophysics Data System (ADS)

Shortall, Ruth; Uihlein, Andreas

2017-04-01

Introduction The NER 300 programme, managed by the European Commission is one of the largest funding programmes for innovative low-carbon energy demonstration projects. NER 300 is so called because it is funded from the sale of 300 million emission allowances from the new entrants' reserve (NER) set up for the third phase of the EU emissions trading system (ETS). The programme aims to successfully demonstrate environmentally safe carbon capture and storage (CCS) and innovative renewable energy (RES) technologies on a commercial scale with a view to scaling up production of low-carbon technologies in the EU. Consequently, it supports a wide range of CCS and RES technologies (bioenergy, concentrated solar power, photovoltaics, geothermal, wind, ocean, hydropower, and smart grids). Funded projects and the role of geothermal projects for the programme In total, about EUR 2.1 billion have been awarded through the programme's 2 calls for proposals (the first awarded in December 2012, the second in July 2014). The programme has awarded around EUR 70 million funding to 3 geothermal projects in Hungary, Croatia and France. The Croatian geothermal project will enter into operation during 2017 the Hungarian in 2018, and the French in 2020. Knowledge Sharing Knowledge sharing requirements are built into the legal basis of the programme as a critical tool to lower risks in bridging the transition to large-scale production of innovative renewable energy and CCS deployment. Projects have to submit annually to the European Commission relevant knowledge gained during that year in the implementation of their project. The relevant knowledge is aggregated and disseminated by the European Commission to industry, research, government, NGO and other interest groups and associations in order to provide a better understanding of the practical challenges that arise in the important step of scaling up technologies and operating them at commercial scale. The knowledge sharing of the NER 300 programme should lead to better planning and faster introduction of low carbon technologies in the future. Content of the presentation The presentation will introduce the geothermal projects that have been awarded funding (see Annex), including their state-of-play. Insights and knowledge gained from the projects that have entered into operation will be shown and discussed. Furthermore, the presentation will provide an overview of the NER 300 programme.

Stakeholder analysis of the Programme for Improving Mental health carE (PRIME): baseline findings.

PubMed

Makan, Amit; Fekadu, Abebaw; Murhar, Vaibhav; Luitel, Nagendra; Kathree, Tasneem; Ssebunya, Joshua; Lund, Crick

2015-01-01

The knowledge generated from evidence-based interventions in mental health systems research is seldom translated into policy and practice in low and middle-income countries (LMIC). Stakeholder analysis is a potentially useful tool in health policy and systems research to improve understanding of policy stakeholders and increase the likelihood of knowledge translation into policy and practice. The aim of this study was to conduct stakeholder analyses in the five countries participating in the Programme for Improving Mental health carE (PRIME); evaluate a template used for cross-country comparison of stakeholder analyses; and assess the utility of stakeholder analysis for future use in mental health policy and systems research in LMIC. Using an adapted stakeholder analysis instrument, PRIME country teams in Ethiopia, India, Nepal, South Africa and Uganda identified and characterised stakeholders in relation to the proposed action: scaling-up mental health services. Qualitative content analysis was conducted for stakeholder groups across countries, and a force field analysis was applied to the data. Stakeholder analysis of PRIME has identified policy makers (WHO, Ministries of Health, non-health sector Ministries and Parliament), donors (DFID UK, DFID country offices and other donor agencies), mental health specialists, the media (national and district) and universities as the most powerful, and most supportive actors for scaling up mental health care in the respective PRIME countries. Force field analysis provided a means of evaluating cross-country stakeholder power and positions, particularly for prioritising potential stakeholder engagement in the programme. Stakeholder analysis has been helpful as a research uptake management tool to identify targeted and acceptable strategies for stimulating the demand for research amongst knowledge users, including policymakers and practitioners. Implementing these strategies amongst stakeholders at a country level will hopefully reduce the knowledge gap between research and policy, and improve health system outcomes for the programme.

The (de)politicisation of nuclear power: The Finnish discussion after Fukushima.

PubMed

Ylönen, Marja; Litmanen, Tapio; Kojo, Matti; Lindell, Pirita

2017-04-01

When the Fukushima accident occurred in March 2011, Finland was at the height of a nuclear renaissance, with the Government's decision-in-principle in 2010 to allow construction of two new nuclear reactors. This article examines the nuclear power debate in Finland after Fukushima. We deploy the concepts of (de)politicisation and hyperpoliticisation in the analysis of articles in the country's main newspaper. Our analysis indicates that Finnish nuclear exceptionalism manifested in the safety-related depoliticising and the nation's prosperity-related hyperpoliticisation arguments of the pro-nuclear camp. The anti-nuclear camp used politicisation strategies, such as economic arguments, to show the unprofitability of nuclear power. The Fukushima accident had a clear effect on Finnish nuclear policy: the government programme of 2011 excluded the nuclear new build. However, in 2014 the majority of Parliament again supported nuclear power. Hence, the period after Fukushima until 2014 could be described as continued but undermined loyalty to nuclear power.

Exploring Students' Ideas About Risks and Benefits of Nuclear Power Using Risk Perception Theories

NASA Astrophysics Data System (ADS)

Kılınç, Ahmet; Boyes, Edward; Stanisstreet, Martin

2013-06-01

Due to increased energy demand, Turkey is continuing to explore the possibilities of introducing nuclear power. Gaining acceptance from local populations, however, may be problematic because nuclear power has a negative image and risk perceptions are complicated by a range of psychological and cultural factors. In this study, we explore the views about nuclear power of school students from three locations in Turkey, two of which have been proposed as sites suitable for nuclear power plants. About half of the student cohort believed that nuclear power can supply continuous and sufficient electricity, but approximately three quarters thought that nuclear power stations could harm organisms, including humans, living nearby. Rather few students realized that adoption of nuclear power would help to reduce global warming and thereby limit climate change; indeed, three quarters thought that nuclear power would make global warming worse. There was a tendency for more students from the location most likely to have a nuclear power plant to believe negative characteristics of nuclear power, and for fewer students to believe positive characteristics. Exploration of the possible nuclear power programmes by Turkey offers an educational opportunity to understand the risk perceptions of students that affect their decision-making processes.

Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

PubMed

Lanata, C F; Black, R E

1991-01-01

Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

Second-generation HIV surveillance: better data for decision-making.

PubMed Central

Rehle, Thomas; Lazzari, Stefano; Dallabetta, Gina; Asamoah-Odei, Emil

2004-01-01

This paper seeks to outline the key elements of the expanded surveillance efforts recommended by the second-generation HIV surveillance approach. Second-generation systems focus on improving and expanding existing surveillance methods and combine them in ways that have the greatest explanatory power. The main elements of this approach include: considering biological surveillance - HIV, AIDS, sexually transmitted infections (STIs) - and behavioural surveillance as integral components, targeting surveillance efforts at segments of the population where most new infections are concentrated - which might differ depending on the stage and type of the epidemic - and providing the rationale for the optimal use of data generated for monitoring the HIV epidemic and evaluating national AIDS control programmes. The paper emphasizes improvements in existing surveillance methodologies and discusses in detail crucial issues such as the validity of HIV prevalence data measured in pregnant women and linking HIV surveillance and behavioural data collection. In addition, a strategic partnership between second-generation surveillance and AIDS programme evaluation is proposed that stresses the complementary roles of these data collection activities in determining the effectiveness of prevention and care programmes and explaining the epidemiological trend data collected by sentinel serosurveillance systems. In conclusion, second-generation HIV surveillance systems provide a comprehensive, cost-effective and appropriate response to the information needs of AIDS control programmes. The implementation of such systems, including a better use of the data generated by the system, will ensure that national programmes are in the best possible position to respond to the challenges of the epidemic. PMID:15042234

Why do managers allocate resources to workplace health promotion programmes in countries with national health coverage?

PubMed

Downey, Angela M; Sharp, David J

2007-06-01

There is extensive evidence that worksite health promotion (WHP) programmes reduce healthcare costs and improve employee productivity. In many countries, a large proportion of healthcare costs are borne by the state. While the full benefits of WHP are still created, they are shared between employers and the state, even though the employer bears the full (after-tax) cost. Employers therefore have a lower incentive to implement WHP activity. We know little about the beliefs of managers with decision responsibility for the approval and implementation of WHP programmes in this context. This article reports the results of a study of the attitudes of Canadian senior general managers (GMs) and human resource managers (HRMs) in the auto parts industry in Ontario, Canada towards the consequences of increasing discretionary spending on WHP, using Structural Equation Modelling and the Theory of Planned Behaviour. We identified factors that explain managers' intentions to increase discretionary spending on wellness programmes. While both senior GMs and HRMs are motivated primarily by their beliefs that WHP reduces indirect costs of health failure, GMs were also motivated by their moral responsibility towards employees (but surprisingly HRMs were not). Importantly, HRMs, who usually have responsibility for WHP, felt constrained by a lack of power to commit resources. Most importantly, we found no social expectation that organizations should provide WHP programmes. This has important implications in an environment where the adoption of WHP is very limited and cost containment within the healthcare system is paramount.

Second-generation HIV surveillance: better data for decision-making.

PubMed

Rehle, Thomas; Lazzari, Stefano; Dallabetta, Gina; Asamoah-Odei, Emil

2004-02-01

This paper seeks to outline the key elements of the expanded surveillance efforts recommended by the second-generation HIV surveillance approach. Second-generation systems focus on improving and expanding existing surveillance methods and combine them in ways that have the greatest explanatory power. The main elements of this approach include: considering biological surveillance - HIV, AIDS, sexually transmitted infections (STIs) - and behavioural surveillance as integral components, targeting surveillance efforts at segments of the population where most new infections are concentrated - which might differ depending on the stage and type of the epidemic - and providing the rationale for the optimal use of data generated for monitoring the HIV epidemic and evaluating national AIDS control programmes. The paper emphasizes improvements in existing surveillance methodologies and discusses in detail crucial issues such as the validity of HIV prevalence data measured in pregnant women and linking HIV surveillance and behavioural data collection. In addition, a strategic partnership between second-generation surveillance and AIDS programme evaluation is proposed that stresses the complementary roles of these data collection activities in determining the effectiveness of prevention and care programmes and explaining the epidemiological trend data collected by sentinel serosurveillance systems. In conclusion, second-generation HIV surveillance systems provide a comprehensive, cost-effective and appropriate response to the information needs of AIDS control programmes. The implementation of such systems, including a better use of the data generated by the system, will ensure that national programmes are in the best possible position to respond to the challenges of the epidemic.

Design and methods of CYCLE-HD: improving cardiovascular health in patients with end stage renal disease using a structured programme of exercise: a randomised control trial.

PubMed

Graham-Brown, M P M; March, D S; Churchward, D R; Young, H M L; Dungey, M; Lloyd, S; Brunskill, N J; Smith, A C; McCann, G P; Burton, J O

2016-07-08

There is emerging evidence that exercise training could positively impact several of the cardiovascular risk factors associated with sudden cardiac death amongst patients on haemodialysis. The primary aim of this study is to evaluate the effect of an intradialytic exercise programme on left ventricular mass. Prospective, randomised cluster open-label blinded endpoint clinical trial in 130 patients with end stage renal disease on haemodialysis. Patients will be randomised 1:1 to either 1) minimum of 30 min continuous cycling thrice weekly during dialysis or 2) standard care. The primary outcome is change in left ventricular mass at 6 months, assessed by cardiac MRI (CMR). In order to detect a difference in LV mass of 15 g between groups at 80 % power, a sample size of 65 patients per group is required. Secondary outcome measures include abnormalities of cardiac rhythm, left ventricular volumes and ejection fraction, physical function measures, anthropometric measures, quality of life and markers of inflammation, with interim assessment for some measures at 3 months. This study will test the hypothesis that an intradialytic programme of exercise leads to a regression in left ventricular mass, an important non-traditional cardiovascular risk factor in end stage renal disease. For the first time this will be assessed using CMR. We will also evaluate the efficacy, feasibility and safety of an intradialytic exercise programme using a number of secondary end-points. We anticipate that a positive outcome will lead to both an increased patient uptake into established intradialytic programmes and the development of new programmes nationally and internationally. ISRCTN11299707 (registration date 5(th) March 2015).

Advanced user support programme—TEMPUS IML-2

NASA Astrophysics Data System (ADS)

Diefenbach, A.; Kratz, M.; Uffelmann, D.; Willnecker, R.

1995-05-01

The DLR Microgravity User Support Centre (MUSC) in Cologne has supported microgravity experiments in the field of materials and life sciences since 1979. In the beginning of user support activities, MUSC tasks comprised the basic ground and mission support, whereas present programmes are expanded on, for example, powerful telescience and advanced real time data acquisition capabilities for efficient experiment operation and monitoring. In view of the Space Station era, user support functions will increase further. Additional tasks and growing responsibilities must be covered, e.g. extended science support as well as experiment and facility operations. The user support for TEMPUS IML-2, under contract of the German Space Agency DARA, represents a further step towards the required new-generation of future ground programme. TEMPUS is a new highly sophisticated Spacelab multi-user facility for containerless processing of metallic samples. Electromagnetic levitation technique is applied and various experiment diagnosis tools are offered. Experiments from eight U.S. and German investigator groups have been selected for flight on the second International Microgravity Laboratory Mission IML-2 in 1994. Based on the experience gained in the research programme of the DLR Institute for Space Simulation since 1984, MUSC is performing a comprehensive experiment preparation programme in close collaboration with the investigator teams. Complex laboratory equipment has been built up for technology and experiment preparation development. New experiment techniques have been developed for experiment verification tests. The MUSC programme includes thorough analysis and testing of scientific requirements of every proposed experiment with respect to the facility hard- and software capabilities. In addition, studies on the experiment-specific operation requirements have been performed and suitable telescience scenarios were analysed. The present paper will give a survey of the TEMPUS user support tasks emphasizing the advanced science support activities, which are considered significant for future ground programmes.

Conserving water in and applying solar power to haemodialysis: 'green dialysis' through wiser resource utilization.

PubMed

Agar, John W M

2010-06-01

Natural resources are under worldwide pressure, water and sustainable energy being the paramount issues. Haemodialysis, a water-voracious and energy-hungry healthcare procedure, thoughtlessly wastes water and leaves a heavy carbon footprint. In our service, 100 000 L/week of previously discarded reverse osmosis reject water--water which satisfies all World Health Organisation criteria for potable (drinking) water--no longer drains to waste but is captured for reuse. Reject water from the hospital-based dialysis unit provides autoclave steam for instrument sterilization, ward toilet flushing, janitor stations and garden maintenance. Satellite centre reject water is tanker-trucked to community sporting fields, schools and aged-care gardens. Home-based nocturnal dialysis patient reuse reject water for home domestic utilities, gardens and animal watering. Although these and other potential water reuse practices should be mandated through legislation for all dialysis services, this is yet to occur. In addition, we now are piloting the use of solar power for the reverse osmosis plant and the dialysis machines in our home dialysis training service. If previously attempted, these have yet to be reported. After measuring the power requirements of both dialytic processes and modelling the projected costs, a programme has begun to solar power all dialysis-related equipment in a three-station home haemodialysis training unit. Income-generation with the national electricity grid via a grid-share and reimbursement arrangement predicts a revenue stream back to the dialysis service. Dialysis services must no longer ignore the non-medical aspects of their programmes but plan, trial, implement and embrace 'green dialysis' resource management practices.

Ash from thermal power plants as secondary raw material.

PubMed

Cudić, Vladica; Kisić, Dragica; Stojiljković, Dragoslava; Jovović, Aleksandar

2007-06-01

The basic characteristic of thermal power plants in the Republic of Serbia is that they use low-grade brown coal (lignite) as a fuel. Depending on the location of coal mines, lignite may have different properties such as heating value, moisture, and mineral content, resulting in different residue upon combustion. Because of several million tonnes of ash and slag generated every year, their granularmetric particle size distribution, and transport and disposal methods, these plants have a negative impact on the environment. According to the waste classification system in the Republic of Serbia, ash and slag from thermal power plants are classified as hazardous waste, but with an option of usability. The proposed revision of waste legislation in Serbia brings a number of simple and modern solutions. A procedure is introduced which allows for end-of-waste criteria to be set, clarifying the point where waste ceases to be waste, and thereby introducing regulatory relief for recycled products or materials that represent low risk for the environment. The new proposal refocuses waste legislation on the environmental impacts of the generation and management of waste, taking into account the life cycle of resources, and develops new waste prevention programmes. Stakeholders, as well as the general public, should have the opportunity to participate in the drawing up of the programmes, and should have access to them.

A programmable microsystem using system-on-chip for real-time biotelemetry.

PubMed

Wang, Lei; Johannessen, Erik A; Hammond, Paul A; Cui, Li; Reid, Stuart W J; Cooper, Jonathan M; Cumming, David R S

2005-07-01

A telemetry microsystem, including multiple sensors, integrated instrumentation and a wireless interface has been implemented. We have employed a methodology akin to that for System-on-Chip microelectronics to design an integrated circuit instrument containing several "intellectual property" blocks that will enable convenient reuse of modules in future projects. The present system was optimized for low-power and included mixed-signal sensor circuits, a programmable digital system, a feedback clock control loop and RF circuits integrated on a 5 mm x 5 mm silicon chip using a 0.6 microm, 3.3 V CMOS process. Undesirable signal coupling between circuit components has been investigated and current injection into sensitive instrumentation nodes was minimized by careful floor-planning. The chip, the sensors, a magnetic induction-based transmitter and two silver oxide cells were packaged into a 36 mm x 12 mm capsule format. A base station was built in order to retrieve the data from the microsystem in real-time. The base station was designed to be adaptive and timing tolerant since the microsystem design was simplified to reduce power consumption and size. The telemetry system was found to have a packet error rate of 10(-3) using an asynchronous simplex link. Trials in animal carcasses were carried out to show that the transmitter was as effective as a conventional RF device whilst consuming less power.

High-intensity and resistance training and elite young athletes.

PubMed

Ratel, Sébastien

2011-01-01

Although in the past resistance and high-intensity exercise training among young children was the subject of numerous controversies, it is now well-documented that this training mode is a safe and effective means of developing maximal strength, maximal power output and athletic performance in youth, provided that exercises are performed with appropriate supervision and precautions. Muscular strength and power output values measured from vertical jump and Wingate anaerobic tests are higher in elite than in non-elite young athletes and normal children, and the specific training effects on maximal power output normalised for body size are clearly more distinct before puberty. At present, there is no scientific evidence to support the view that high-intensity and/or resistance training might hinder growth and maturation in young children. Pre-pubertal growth is not adversely affected by sport at a competitive level and anthropometric factors are of importance for choice of sport in children. However, coaches, teachers and parents should be aware that unsupervised high-intensity and resistance training programmes involving maximal loads or too frequently repeated resistance exercises increase the risk of injury. Resistance training alone is an effective additional means of developing athletic performance throughout planned youth sports training programmes. Strategies for enhancing the effectiveness and safety of youth resistance and high-intensity exercise training are discussed in this chapter. Copyright © 2011 S. Karger AG, Basel.

More than communication skills: experiences of communication conflict in nursing home nurses.

PubMed

Tsai, Hsiu-Hsin; Tsai, Yun-Fang; Weng, Li-Chueh; Chou, Hsueh-Fen

2013-10-01

Communication conflicts are inevitable in nursing homes. Understanding communication conflicts experienced by practising nurses could provide insights to guide the development of sound communication education programmes. The purpose of this study was to explore the experiences of nurses in nursing homes of communication conflict in encounters with nursing home residents and their families in Taiwan. Data were collected from April 2010 to December 2011 through audiotaped, individual, in-depth interviews with 26 nurses at five nursing homes in Taiwan. Data were analysed according to van Manen's interpretive phenomenological method. Data analysis revealed that nurses' experiences of communication conflicts during encounters with nursing home residents and their families could be categorised under three themes: differences in perspectives of nursing home services; differences in views of nurturing health, and mediation between family members and others. The findings of this study can be considered by clinical educators and policymakers when designing communication education programmes for nurses and other clinicians. These programmes should include ways to increase nurses' independent thinking in settings in which power differences exist, as well as their cultural sensitivity as embodied in Leininger's culture care theory. These programmes should also include education in telephone communication and alternative methods of communication (e.g. videoconferencing). © 2013 John Wiley & Sons Ltd.

Political epidemiology: strengthening socio-political analysis for mass immunisation - lessons from the smallpox and polio programmes.

PubMed

Taylor, S

2009-01-01

Control and reduction of infectious diseases is a key to attaining the Millennium Development Goals. An important element of this work is the successful immunisation, especially in resource-poor countries. Mass immunisation, most intensively in the case of eradication, depends on a combination of reliable demand (e.g. public willingness to comply with the vaccine protocol) and effective supply (e.g. robust, generally state-led, vaccine delivery). This balance of compliance and enforceability is, quintessentially, socio-political in nature - conditioned by popular perceptions of disease and risk, wider conditions of economic development and poverty, technical aspects of vaccine delivery, and the prevailing international norms regarding power relations between states and peoples. In the past 100 years, three out of six disease eradication programmes have failed. The explanations for failure have focused on biotechnical and managerial or financial issues. Less attention is paid to socio-political aspects. Yet socio-political explanations are key. Eradication is neither inherently prone to failure, nor necessarily doomed in the case of polio. However, eradication, and similar mass immunisation initiatives, which fail to address social and political realities of intervention may be. A comparison of the smallpox and polio eradication programmes illustrates the importance of disease-specific socio-political analysis in programme conceptualisation, design, and management.

[Drug politics in the USA].

PubMed

Gaier, N

2001-11-08

About 40 million Americans over 65 years of age are enrolled in the Medicare programme. However, this programme (with some exceptions approved by the Congress) does not provide prescription drug coverage for the outpatients. Furthermore, the recent rate of drug expenditure increase has been twice higher compared to overall health care expenditures. Even though the Medicare beneficiaries are offered various forms of supplemental prescription drug coverage, there exist attempts to reform this national programme. Several such proposals, however, failed during the last 15 years (US Congress). A recent two-stage strategy for a comprehensive Medicare reform was proposed by president Bush jr. It would solve the prescription drug coverage (even without the Medicare beneficiary enrollment in supplemental private programmes) through direct support to federal states in the first stage; in the second stage, a comprehensive Medicare reform would take place and the prescription drug coverage would be subsidized in proportion to the annual income of the beneficiaries. The required cost of this reform would be about 160 thousand million $ over a decade. This plan brought about opposing proposals both from the Democrats and Republicans in the Congress. The fate of the reform will depend on the representation of the two political parties both in the House of Representatives and the Senate as well as on the political power of influential groups.

Job coach factors associated with community-based employment service programme outcome measures for people with disabilities--a Taiwan case study.

PubMed

Yun-Tung, Wang

2010-01-01

The aim of this study is to explore whether/which job coach factors were significantly associated with the community-based employment service (CBES) programme outcome measures in Taiwan. This study used the 2003-2005 CBES programme for People with Disabilities Database in Taipei City in Taiwan (n = 3924) to do a secondary data analysis using hierarchical multiple linear regression. This study found that 'occurrences of the services provided by the job coaches' variable was definitely the dominant predictor and explained additional 19.6% and 27.8% of the variances of annual salary and annual working month outcome measures, respectively. In addition, among six composition variables of 'occurrences of the services provided by the job coaches', 'occurrences of follow-up guidance', 'occurrences of intensive guidance', and 'occurrences of consultation before interviews with employer/director of human resources' were more powerful than the other three in predicting outcomes. Job coach factors in this study were significantly correlated with CBES programme outcome measures for people with disabilities in Taiwan after controlling for the socio-demographic variables. It indicates that the more inputs in the people with disabilities made by job coaches equates to better outcomes in this Taiwan case study.

Balancing authority, deference and trust across the public–private divide in health care: Tuberculosis health visitors in western Maharashtra, India

PubMed Central

Kielmann, Karina; Datye, Vinita; Pradhan, Anagha; Rangan, Sheela

2014-01-01

While concepts such as ‘partnership’ are central to the terminology of private–public mix (PPM), little attention has been paid to how social relations are negotiated among the diverse actors responsible for implementing these inter-sectoral arrangements. India's Revised National Tuberculosis Control Programme (RNTCP) has used intermediary agents to facilitate the involvement of private providers in the expansion of Directly Observed Therapy, Short-Course (DOTS). We examine the roles of tuberculosis health visitors (TB HVs) in mediating working relationships among private providers, programme staff and patients that underpin a PPM-DOTS launched by the RNTCP in western Maharashtra. In addition to observations and informal interactions with the programme and participating health providers, researchers conducted in-depth interviews with senior programme officers and eight TB HVs. Framed by a political discourse of clinical governance, working relationships within the PPM are structured by the pluralistic context, social and professional hierarchies and paternalism of health care in India. TB HVs are at the nexus of these relationships, yet remain undervalued partly because accountability is measured through technical rather than social outcomes of the ‘partnership’. Close attention to the dynamics of power relations in working practices within the health system can improve accountability and sustainability of partnerships. PMID:25147003

Wood for energy and rural development: the Philippine experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denton, F.H.

1983-01-01

The Philippine wood energy programme (dendro-thermal system) was originally developed as a source of energy independent of imported oil, and at a lower cost than oil. It has social benefits: new jobs, land distribution, rural income increment, and reforestation by tree farmers. Tree farming, its administration and organization of farmer institutions are essential to the programme, as are the development of farming techniques to produce energy, trees (growth of ipil-ipil), and an improved tree growth rate. An analysis of the economics of wood energy led to the conclusion that raw wood fuel can be cheaper than oil. In estimated costsmore » of electricity, the dendro-thermal plants can produce power at competitive rates. 36 references.« less

DSP/FPGA Design for a High-Speed Programmable S-Band Space Transceiver

NASA Technical Reports Server (NTRS)

Janicik, Jeffrey; Friedman, Assi

2013-01-01

Traditional command uplink receivers are very limited in performance capability, take a long time to acquire, cannot operate on both uplink bands (NASA & AFSCN), and only support low-rate communications. As a result, transceivers end up on many programs critical paths, even though they should be a standard purchased spacecraft subsystem. Also, many missions are impacted by the low effective uplink throughput. In order to tackle these challenges, a transceiver was developed that will provide on-site frequency agility, support of high uplink rates, and operation on both NASA and AFSCN frequency bands. The device is a low-power, high-reliability, and high-performance digital signal processing (DSP) demodulator for an on-orbit programmable command receiver.

Programmable LED-based integrating sphere light source for wide-field fluorescence microscopy.

PubMed

Rehman, Aziz Ul; Anwer, Ayad G; Goldys, Ewa M

2017-12-01

Wide-field fluorescence microscopy commonly uses a mercury lamp, which has limited spectral capabilities. We designed and built a programmable integrating sphere light (PISL) source which consists of nine LEDs, light-collecting optics, a commercially available integrating sphere and a baffle. The PISL source is tuneable in the range 365-490nm with a uniform spatial profile and a sufficient power at the objective to carry out spectral imaging. We retrofitted a standard fluorescence inverted microscope DM IRB (Leica) with a PISL source by mounting it together with a highly sensitive low- noise CMOS camera. The capabilities of the setup have been demonstrated by carrying out multispectral autofluorescence imaging of live BV2 cells. Copyright © 2017 Elsevier B.V. All rights reserved.

Alleviating poverty or reinforcing inequality? Interpreting micro-finance in practice, with illustrations from rural China.

PubMed

Hsu, Becky Yang

2014-06-01

Academic and political discussions about micro-finance have been found lacking in predictive power, because they are based on orthodox economic theory, which does not properly comprehend the social components of credit. I take a better approach, utilizing credit theory--specifically, Ingham's explication of how the nature of money as credit leads to social inequality. I also expound the perspective that morality is not separate from considerations borrowers make in micro-finance programmes on the micro level. I draw upon illustrations from my fieldwork in rural China, where a group-lending micro-finance programme was administered as part of a larger government-initiated effort across the country. © London School of Economics and Political Science 2014.

Flexible digital modulation and coding synthesis for satellite communications

NASA Technical Reports Server (NTRS)

Vanderaar, Mark; Budinger, James; Hoerig, Craig; Tague, John

1991-01-01

An architecture and a hardware prototype of a flexible trellis modem/codec (FTMC) transmitter are presented. The theory of operation is built upon a pragmatic approach to trellis-coded modulation that emphasizes power and spectral efficiency. The system incorporates programmable modulation formats, variations of trellis-coding, digital baseband pulse-shaping, and digital channel precompensation. The modulation formats examined include (uncoded and coded) binary phase shift keying (BPSK), quatenary phase shift keying (QPSK), octal phase shift keying (8PSK), 16-ary quadrature amplitude modulation (16-QAM), and quadrature quadrature phase shift keying (Q squared PSK) at programmable rates up to 20 megabits per second (Mbps). The FTMC is part of the developing test bed to quantify modulation and coding concepts.

Evaluation of the Use of Team Teaching for Delivering Sensitive Content: A Pilot Study

ERIC Educational Resources Information Center

Kerridge, Joanna; Kyle, Gaye; Marks-Maran, Diane

2009-01-01

Many programmes in further and higher education contain sensitive areas of content, such as diversity, racism, power and privilege, breaking bad news, counselling, sex education and ethical decision making. Team teaching may be a useful method for delivering sensitive areas of course content. This article presents a pilot study that was undertaken…

Open source data logger for low-cost environmental monitoring

PubMed Central

2014-01-01

Abstract The increasing transformation of biodiversity into a data-intensive science has seen numerous independent systems linked and aggregated into the current landscape of biodiversity informatics. This paper outlines how we can move forward with this programme, incorporating real time environmental monitoring into our methodology using low-power and low-cost computing platforms. PMID:24855446

Reflective Learning in a Chinese MBA Programme: Scale Assessment and Future Recommendations

ERIC Educational Resources Information Center

Xiao, Qian; Zhu, Pinghui; Hsu, Maxwell K.; Zhuang, Weiling; Peltier, James

2016-01-01

The purpose of this study was twofold: (1) to use Chinese MBA students to validate the expanded reflective learning continuum and address the concerns raised in this regard in business education; (2) to determine whether the continuum concept holds true in a non-western culture and whether the reflective learning continuum remains a powerful force…

Changing Lives? Critical Evaluation of a School-Based Athlete Role Model Intervention

ERIC Educational Resources Information Center

Armour, Kathleen; Duncombe, Rebecca

2012-01-01

There would appear to be an enduring belief that successful sportsmen and women can act as powerful motivational role models for young people, especially disaffected, disadvantaged or disengaged youth. In the UK, for example, this belief has been expressed recently in the development of programmes, such as changingLIVES, the Respect Athlete Mentor…

Preparing Teachers to Deliver Gender-Focused Sexuality/HIV Education: A Case Study from Nigeria

ERIC Educational Resources Information Center

Wood, Susan Y.; Rogow, Deborah; Stines, Frederica

2015-01-01

Evidence shows that a focus on gender and power in sexuality/HIV education increases the likelihood of achieving positive sexual health outcomes, and international agencies have called for a shift to a gender-focused approach. However, questions remain about the implementation of such programmes, including how best to prepare teachers to deliver…

"Disappearance" and Feminist Research in the South African Academy of Humanities

ERIC Educational Resources Information Center

Bennett, Jane

2016-01-01

Following a global trend in humanities since the mid-1970s, South African humanities faculties began to include formal programmes in gender and sexualities studies from the mid-1990s on. While the immediate post-flag democratic era encouraged intellectual concentration on diverse questions of power and knowledge, the new century saw a decline in…

People, Power, and Participation. The Communities in Crisis Programme, 1986-9: An Evaluative Report.

ERIC Educational Resources Information Center

Batten, Julie

Communities in Crisis is a British training program for unemployed adults that was developed in response to the needs of community organizations in areas where community programs have few resources. Its underlying philosophy focuses on motivating and encouraging long-term unemployed people to take initiatives and reflect on their progress. The…

Differential Outcomes of Adult Education on Adult Learners' Increase in Social Inclusion

ERIC Educational Resources Information Center

de Greef, Maurice; Verté, Dominique; Segers, Mien

2015-01-01

To date a significant share of the European population can be considered at risk of social exclusion. It has been argued that adult education programmes are a powerful tool to support vulnerable adults increasing their social inclusion. This study aims to answer the question if and which subgroups of vulnerable adults experience an increase in…

Using plant functional traits to restore Hawaiian rainforest

Treesearch

Rebecca Ostertag; Laura Warman; Susan Cordell; Peter M. Vitousek

2015-01-01

Ecosystem restoration efforts are carried out by a variety of individuals and organizations with an equally varied set of goals, priorities, resources and time-scales. Once restoration of a degraded landscape or community is recognized as necessary, choosing which species to include in a restoration programme can be a difficult and value-laden process (Fry, Power &...

An Analysis of the Value of Multiple Mentors in Formalised Elite Coach Mentoring Programmes

ERIC Educational Resources Information Center

Sawiuk, Rebecca; Taylor, William. G.; Groom, Ryan

2017-01-01

Background: Within the context of sports coaching and coach education, formalised mentoring relationships are often depicted as a mentor--mentee dyad. Thus, mentoring within sports coaching is typically conceptualised as a one-dimensional relationship, where the mentor is seen as the powerful member of the dyad, with greater age and/or experience…

Culture Matters--The Training of Senior Civil Servants in Austria, Germany, the Netherlands and Switzerland

ERIC Educational Resources Information Center

Knassmüller, Monika; Veit, Sylvia

2016-01-01

Senior civil servants (SCS) are powerful actors with great responsibilities in the field of policymaking and management. Due to public sector reforms that are New Public Management oriented, specialised education and structured training programmes for (future) SCS as well as fast-track systems for high-potential employees have become increasingly…

"The Learning Sticks": Reflections on a Case Study of Role-Playing for Sustainability

ERIC Educational Resources Information Center

Gordon, Sue; Thomas, Ian

2018-01-01

Use of role-plays to develop deep student-learning has many advocates. Role-play is a powerful approach for learning that develops relevant skills in a range of disciplines and situations. In Higher Education, sustainability programmes role-play pedagogy appears to have great relevance for developing the competencies that these graduates will…

Power games: The political use of solar technology in northern Thailand

NASA Astrophysics Data System (ADS)

Green, Donna Lisa

This dissertation politicises and historically situates the transfer of an environmental technology to a less developed country, a transfer that has occurred under the rubric of sustainable development. The case study explores the social and political context of two solar battery charging station programmes selected to provide electrification in rural Northern Thailand beginning in the 1980s. It places these rural electrification programmes in the context of previous rural electrification policies in northern Thailand in the 1960s and 1970s which were driven by an explicitly state-serving agenda: an agenda that aimed to expand the centralised state's ability to pacify and control remote areas of the country. However, it is clear that the technology and implementation strategies selected for the new electrification programmes could not fulfil their community-serving objectives; furthermore, these systems could not meet the actual energy needs of the programmes' intended beneficiaries. I argue that we need to consider whether the objectives that motivated previous rural electrification programmes may be continuing to play a role in the promotion of these new rural electrification programmes, a motivation that would contradict the philosophy behind the choice of the solar battery charging stations. Specifically, I show how the new rural electrification strategy has been de-politicised through its framing within the sustainable development discourses. This thesis highlights how the rush to promote environmental technologies through the rubric of sustainable development may limit a proper consideration of the social and political dynamics that motivated these decisions, resulting in the uncritical justification of technology selection. Scholars have critiqued the social ramifications of, and the political motivations behind, earlier technocentric rural development strategies, showing how they can exacerbate social inequalities. I argue that in this situation, the alleged environmental benefits of using an environmental technology in a sustainable development programme may have served to shelter it from similar critique. The assessment reveals and emphasises the need to query the validity of the objectives motivating other technocentric rural development programmes that transfer environmental technologies as part of the practice of sustainable development.

Improving women's nutrition imperative for rapid reduction of childhood stunting in South Asia: coupling of nutrition specific interventions with nutrition sensitive measures essential

PubMed Central

2016-01-01

Abstract The implications of direct nutrition interventions on women's nutrition, birth outcome and stunting rates in children in South Asia are indisputable and well documented. In the last decade, a number of studies present evidence of the role of non‐nutritional factors impacting on women's nutrition, birth outcome, caring practices and nutritional status of children. The implications of various dimensions of women's empowerment and gender inequality on child stunting is being increasingly recognised. Evidence reveals the crucial role of early age of marriage and conception, poor secondary education, domestic violence, inadequate decision‐making power, poor control over resources, strenuous agriculture activities, and increasing employment of women and of interventions such as cash transfer scheme and microfinance programme on undernutrition in children. Analysis of the nutrition situation of women and children in South Asia and programme findings emphasise the significance of reaching women during adolescence, pre‐conception and pregnancy stage. Ensuring women enter pregnancy with adequate height and weight and free from being anemic is crucial. Combining nutrition‐specific interventions with measures for empowerment of women is essential. Improvement in dietary intake and health services of women, prevention of early age marriage and conception, completion of secondary education, enhancement in purchasing power of women, reduction of work drudgery and elimination of domestic violence deserve special attention. A range of programme platforms dealing with health, education and empowerment of women could be strategically used for effectively reaching women prior to and during pregnancy to accelerate reduction in stunting rates in children in South Asia. PMID:27187909

A solution for measuring accurate reaction time to visual stimuli realized with a programmable microcontroller.

PubMed

Ohyanagi, Toshio; Sengoku, Yasuhito

2010-02-01

This article presents a new solution for measuring accurate reaction time (SMART) to visual stimuli. The SMART is a USB device realized with a Cypress Programmable System-on-Chip (PSoC) mixed-signal array programmable microcontroller. A brief overview of the hardware and firmware of the PSoC is provided, together with the results of three experiments. In Experiment 1, we investigated the timing accuracy of the SMART in measuring reaction time (RT) under different conditions of operating systems (OSs; Windows XP or Vista) and monitor displays (a CRT or an LCD). The results indicated that the timing error in measuring RT by the SMART was less than 2 msec, on average, under all combinations of OS and display and that the SMART was tolerant to jitter and noise. In Experiment 2, we tested the SMART with 8 participants. The results indicated that there was no significant difference among RTs obtained with the SMART under the different conditions of OS and display. In Experiment 3, we used Microsoft (MS) PowerPoint to present visual stimuli on the display. We found no significant difference in RTs obtained using MS DirectX technology versus using the PowerPoint file with the SMART. We are certain that the SMART is a simple and practical solution for measuring RTs accurately. Although there are some restrictions in using the SMART with RT paradigms, the SMART is capable of providing both researchers and health professionals working in clinical settings with new ways of using RT paradigms in their work.

Do the Youth Olympic Games promote Olympism? Analysing a mission (im)possible from a local youth perspective.

PubMed

Schnitzer, Martin; Walde, Janette; Scheiber, Sabrina; Nagiller, Roman; Tappeiner, Gottfried

2018-04-23

On the basis of the Youth Olympic Games (YOG), we assess if and how the youth in the communities of the YOG host cities have been influenced concerning their perception of the Olympic values (OV) and the Olympic movement (OM). Special attention of the study is paid to the analysis of intervention mechanisms which the local youth underwent (e.g. attending the YOG on-site, participating in school programmes). Our study was conducted among 1004 adolescents living in the host region three years after the Innsbruck 2012 YOG had been staged. Our analyses extend the corresponding literature by (1) showing that the YOG and the involvement of the local youth in such an event have the power of creating an interest in the OM and its events, but do not have the power to influence the young citizens' perception of the OV significantly; (2) illustrating that the perception adolescents have of the OV depend mainly on their socio-demographic background, their a priori interest in sports events, social capital (norms, institutional trust) and the extent to which the youngsters follow the event in the different media; and (3) corroborating the hypothesis that intervention programmes (e.g. school programmes) for promoting (Olympic) values and ideals should not be single, obligatory and isolated activities. We conclude that it is not surprising that the International Olympic Committee has reformulated the goals for the YOG in the Olympic Agenda 2020, as some goals relating to the promotion of the OV might have been a mission impossible.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goltz, G.; Weiner, H.

A computer program has been developed for designing and analyzing the performance of solar array/battery power systems for the U.S. Coast Guard Navigational Aids. This program is called the Design Synthesis/Performance Analysis (DSPA) Computer Program. The basic function of the Design Synthesis portion of the DSPA program is to evaluate functional and economic criteria to provide specifications for viable solar array/battery power systems. The basic function of the Performance Analysis portion of the DSPA program is to simulate the operation of solar array/battery power systems under specific loads and environmental conditions. This document provides a detailed description of the DSPAmore » Computer Program system and its subprograms. This manual will assist the programmer in revising or updating the several subprograms.« less

Orthorectification by Using Gpgpu Method

NASA Astrophysics Data System (ADS)

Sahin, H.; Kulur, S.

2012-07-01

Thanks to the nature of the graphics processing, the newly released products offer highly parallel processing units with high-memory bandwidth and computational power of more than teraflops per second. The modern GPUs are not only powerful graphic engines but also they are high level parallel programmable processors with very fast computing capabilities and high-memory bandwidth speed compared to central processing units (CPU). Data-parallel computations can be shortly described as mapping data elements to parallel processing threads. The rapid development of GPUs programmability and capabilities attracted the attentions of researchers dealing with complex problems which need high level calculations. This interest has revealed the concepts of "General Purpose Computation on Graphics Processing Units (GPGPU)" and "stream processing". The graphic processors are powerful hardware which is really cheap and affordable. So the graphic processors became an alternative to computer processors. The graphic chips which were standard application hardware have been transformed into modern, powerful and programmable processors to meet the overall needs. Especially in recent years, the phenomenon of the usage of graphics processing units in general purpose computation has led the researchers and developers to this point. The biggest problem is that the graphics processing units use different programming models unlike current programming methods. Therefore, an efficient GPU programming requires re-coding of the current program algorithm by considering the limitations and the structure of the graphics hardware. Currently, multi-core processors can not be programmed by using traditional programming methods. Event procedure programming method can not be used for programming the multi-core processors. GPUs are especially effective in finding solution for repetition of the computing steps for many data elements when high accuracy is needed. Thus, it provides the computing process more quickly and accurately. Compared to the GPUs, CPUs which perform just one computing in a time according to the flow control are slower in performance. This structure can be evaluated for various applications of computer technology. In this study covers how general purpose parallel programming and computational power of the GPUs can be used in photogrammetric applications especially direct georeferencing. The direct georeferencing algorithm is coded by using GPGPU method and CUDA (Compute Unified Device Architecture) programming language. Results provided by this method were compared with the traditional CPU programming. In the other application the projective rectification is coded by using GPGPU method and CUDA programming language. Sample images of various sizes, as compared to the results of the program were evaluated. GPGPU method can be used especially in repetition of same computations on highly dense data, thus finding the solution quickly.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Zvi, I.

Various authors have previously studied the theory and practice of cavity testing, notably an extensive treatment by Powers [1] and Padamsee [2]. The advent of the digital Low Level RF (LLRF) electronics based on Field Programmable Logic Arrays (FPGA) provides various improvements over the rather complex systems used in the past as well as enabling new measurement techniques.In this document we reintroduce a technique that seems to have fallen out of practice in recent times, that is obtaining the coupling constant β through measurements from just one port, the reflected power port, of the directional coupler placed in front ofmore » the cavity.« less

Feed-forward digital phase and amplitude correction system

DOEpatents

Yu, D.U.L.; Conway, P.H.

1994-11-15

Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The phase and amplitude of subsequent are modified by output signals from the correction system. 11 figs.

Feed-forward digital phase and amplitude correction system

DOEpatents

Yu, David U. L.; Conway, Patrick H.

1994-01-01

Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The Phase and amplitude of subsequent are modified by output signals from the correction system.

A 4-week, lifestyle-integrated, home-based exercise training programme elicits improvements in physical function and lean mass in older men and women: a pilot study.

PubMed

Cegielski, Jessica; Brook, Matthew S; Quinlan, Jonathan I; Wilkinson, Daniel J; Smith, Kenneth; Atherton, Philip J; Phillips, Bethan E

2017-01-01

Developing alternative exercise programmes that can alleviate certain barriers to exercise such as psychological, environmental or socio-economical barriers, but provide similar physiological benefits e.g. increases in muscle mass and strength, is of grave importance. This pilot study aimed to assess the efficacy of an unsupervised, 4-week, whole-body home-based exercise training (HBET) programme, incorporated into daily living activities, on skeletal muscle mass, power and strength. Twelve healthy older volunteers (63±3 years, 7 men: 5 women, BMI: 29±1 kg/m²) carried out the 4-week "lifestyle-integrated" HBET of 8 exercises, 3x12 repetitions each, every day. Before and after HBET, a number of physical function tests were carried out: unilateral leg extension 1-RM (one- repetition maximum), MVC (maximal voluntary contraction) leg extension, lower leg muscle power (via Nottingham Power Rig), handgrip strength and SPPBT (short physical performance battery test). A D 3 -Creatine method was used for assessment of whole-body skeletal muscle mass, and ultrasound was used to measure the quadriceps cross-sectional area (CSA) and vastus lateralis muscle thickness. Four weeks HBET elicited significant (p<0.05) improvements in leg muscle power (276.7±38.5 vs. 323.4±43.4 W), maximal voluntary contraction (60°: 154.2±18.4 vs. 168.8±15.2 Nm, 90°: 152.1±10.5 vs. 159.1±11.4 Nm) and quadriceps CSA (57.5±5.4 vs. 59.0±5.3 cm 2 ), with a trend for an increase in leg strength (1-RM: 45.7±5.9 vs. 49.6±6.0 kg, P=0.08). This was despite there being no significant differences in whole-body skeletal muscle mass, as assessed via D 3 -Creatine. This study demonstrates that increases in multiple aspects of muscle function can be achieved in older adults with just 4-weeks of "lifestyle-integrated" HBET, with a cost-effective means. This training mode may prove to be a beneficial alternative for maintaining and/or improving muscle mass and function in older adults.

A 6.45 μW Self-Powered SoC With Integrated Energy-Harvesting Power Management and ULP Asymmetric Radios for Portable Biomedical Systems.

PubMed

Roy, Abhishek; Klinefelter, Alicia; Yahya, Farah B; Chen, Xing; Gonzalez-Guerrero, Luisa Patricia; Lukas, Christopher J; Kamakshi, Divya Akella; Boley, James; Craig, Kyle; Faisal, Muhammad; Oh, Seunghyun; Roberts, Nathan E; Shakhsheer, Yousef; Shrivastava, Aatmesh; Vasudevan, Dilip P; Wentzloff, David D; Calhoun, Benton H

2015-12-01

This paper presents a batteryless system-on-chip (SoC) that operates off energy harvested from indoor solar cells and/or thermoelectric generators (TEGs) on the body. Fabricated in a commercial 0.13 μW process, this SoC sensing platform consists of an integrated energy harvesting and power management unit (EH-PMU) with maximum power point tracking, multiple sensing modalities, programmable core and a low power microcontroller with several hardware accelerators to enable energy-efficient digital signal processing, ultra-low-power (ULP) asymmetric radios for wireless transmission, and a 100 nW wake-up radio. The EH-PMU achieves a peak end-to-end efficiency of 75% delivering power to a 100 μA load. In an example motion detection application, the SoC reads data from an accelerometer through SPI, processes it, and sends it over the radio. The SPI and digital processing consume only 2.27 μW, while the integrated radio consumes 4.18 μW when transmitting at 187.5 kbps for a total of 6.45 μW.

A program for the calculation of paraboloidal-dish solar thermal power plant performance

NASA Technical Reports Server (NTRS)

Bowyer, J. M., Jr.

1985-01-01

A program capable of calculating the design-point and quasi-steady-state annual performance of a paraboloidal-concentrator solar thermal power plant without energy storage was written for a programmable calculator equipped with suitable printer. The power plant may be located at any site for which a histogram of annual direct normal insolation is available. Inputs required by the program are aperture area and the design and annual efficiencies of the concentrator; the intercept factor and apparent efficiency of the power conversion subsystem and a polynomial representation of its normalized part-load efficiency; the efficiency of the electrical generator or alternator; the efficiency of the electric power conditioning and transport subsystem; and the fractional parasitic loses for the plant. Losses to auxiliaries associated with each individual module are to be deducted when the power conversion subsystem efficiencies are calculated. Outputs provided by the program are the system design efficiency, the annualized receiver efficiency, the annualized power conversion subsystem efficiency, total annual direct normal insolation received per unit area of concentrator aperture, and the system annual efficiency.

Punch Card Programmable Microfluidics

PubMed Central

Korir, George; Prakash, Manu

2015-01-01

Small volume fluid handling in single and multiphase microfluidics provides a promising strategy for efficient bio-chemical assays, low-cost point-of-care diagnostics and new approaches to scientific discoveries. However multiple barriers exist towards low-cost field deployment of programmable microfluidics. Incorporating multiple pumps, mixers and discrete valve based control of nanoliter fluids and droplets in an integrated, programmable manner without additional required external components has remained elusive. Combining the idea of punch card programming with arbitrary fluid control, here we describe a self-contained, hand-crank powered, multiplex and robust programmable microfluidic platform. A paper tape encodes information as a series of punched holes. A mechanical reader/actuator reads these paper tapes and correspondingly executes operations onto a microfluidic chip coupled to the platform in a plug-and-play fashion. Enabled by the complexity of codes that can be represented by a series of holes in punched paper tapes, we demonstrate independent control of 15 on-chip pumps with enhanced mixing, normally-closed valves and a novel on-demand impact-based droplet generator. We demonstrate robustness of operation by encoding a string of characters representing the word “PUNCHCARD MICROFLUIDICS” using the droplet generator. Multiplexing is demonstrated by implementing an example colorimetric water quality assays for pH, ammonia, nitrite and nitrate content in different water samples. With its portable and robust design, low cost and ease-of-use, we envision punch card programmable microfluidics will bring complex control of microfluidic chips into field-based applications in low-resource settings and in the hands of children around the world. PMID:25738834

Thermal imager for dismounted infantry

NASA Astrophysics Data System (ADS)

Bigwood, Christopher R.; Eccles, Lee; Jones, Arwyn O.; Jones, Berwyn; Meakin, David L.; Rickard, Steve; Robinson, Rob

2004-12-01

Thermal Imager for Dismounted Infantry (TIDI), is a UK MOD / Thales Optics Ltd. joint funded technology demonstrator programme and is part of the overall programme managed by QinetiQ. The aim of this programme is to evaluate and demonstrate a cost effective route to equipping the infantry soldier with a small, lightweight, rugged, short range, weapon mounted thermal imaging sight; intended for mass deployment. TIDI is an unusual programme in that the requirement was not rigidly defined in terms of a detailed specification. Instead, the requirement was expressed in terms of the question 'What weapon sight performance can be achieved for a volume production cost of 5000 Euro?' This requirement was subject to the constraints that the sight mass should be less than 500 g and the volume should be less than 500 ml. To address the requirements of this programme, Thales Optics Ltd. have performed a detailed trade-off analysis considering alternative uncooled LWIR sensor formats and technologies. The effect of using alternative sensors on the sight cost, mass, volume, power and performance has been compared. A design study has been performed concentrating on simplification of the optics, mechanics and electronics to minimise the overall sight complexity. Based on this analysis, a demonstrator sight has been designed that is cost effective and suitable for volume manufacture, whilst still offering useful performance to the user. Six technical demonstrator units based on this design have been manufactured and evaluated. This paper will give an overview of the work completed to date on the TIDI program, including a description of the demonstrator hardware and its performance.

Punch card programmable microfluidics.

PubMed

Korir, George; Prakash, Manu

2015-01-01

Small volume fluid handling in single and multiphase microfluidics provides a promising strategy for efficient bio-chemical assays, low-cost point-of-care diagnostics and new approaches to scientific discoveries. However multiple barriers exist towards low-cost field deployment of programmable microfluidics. Incorporating multiple pumps, mixers and discrete valve based control of nanoliter fluids and droplets in an integrated, programmable manner without additional required external components has remained elusive. Combining the idea of punch card programming with arbitrary fluid control, here we describe a self-contained, hand-crank powered, multiplex and robust programmable microfluidic platform. A paper tape encodes information as a series of punched holes. A mechanical reader/actuator reads these paper tapes and correspondingly executes operations onto a microfluidic chip coupled to the platform in a plug-and-play fashion. Enabled by the complexity of codes that can be represented by a series of holes in punched paper tapes, we demonstrate independent control of 15 on-chip pumps with enhanced mixing, normally-closed valves and a novel on-demand impact-based droplet generator. We demonstrate robustness of operation by encoding a string of characters representing the word "PUNCHCARD MICROFLUIDICS" using the droplet generator. Multiplexing is demonstrated by implementing an example colorimetric water quality assays for pH, ammonia, nitrite and nitrate content in different water samples. With its portable and robust design, low cost and ease-of-use, we envision punch card programmable microfluidics will bring complex control of microfluidic chips into field-based applications in low-resource settings and in the hands of children around the world.

Geothermal projects funded under the NER 300 programme - current state of development and knowledge gained

NASA Astrophysics Data System (ADS)

Uihlein, Andreas; Salto Saura, Lourdes; Sigfusson, Bergur; Lichtenvort, Kerstin; Gagliardi, Filippo

2015-04-01

Introduction The NER 300 programme, managed by the European Commission is one of the largest funding programmes for innovative low-carbon energy demonstration projects. NER 300 is so called because it is funded from the sale of 300 million emission allowances from the new entrants' reserve (NER) set up for the third phase of the EU emissions trading system (ETS). The programme aims to successfully demonstrate environmentally safe carbon capture and storage (CCS) and innovative renewable energy (RES) technologies on a commercial scale with a view to scaling up production of low-carbon technologies in the EU. Consequently, it supports a wide range of CCS and RES technologies (bioenergy, concentrated solar power, photovoltaics, geothermal, wind, ocean, hydropower, and smart grids). Funded projects and the role of geothermal projects for the programme In total, about EUR 2.1 billion have been awarded to 39 projects through the programme's 2 calls for proposals (the first awarded in December 2012, the second in July 2014). The programme has awarded around 70 mEUR funding to 3 geothermal projects in Hungary, Croatia and France (see Annex). The Hungarian geothermal project awarded funding under the first call will enter into operation at the end of 2015 and the rest are expected to start in 2016 (HR) and in 2018 (FR), respectively. Knowledge Sharing Knowledge sharing requirements are built into the legal basis of the programme as a critical tool to lower risks in bridging the transition to large-scale production of innovative renewable energy and CCS deployment. Projects have to submit annually to the European Commission relevant knowledge gained during that year in the implementation of their project. The relevant knowledge is aggregated and disseminated by the European Commission to industry, research, government, NGO and other interest groups and associations in order to provide a better understanding of the practical challenges that arise in the important step of scaling up technologies and operating them at commercial scale. The knowledge sharing of the NER 300 programme should lead to better planning and faster introduction of low carbon technologies in the future. Content of the presentation The presentation will introduce the geothermal projects that have been awarded funding, including their state-of-play. Insights and knowledge gained from the projects that have entered into operation will be shown and discussed. Furthermore, the presentation will provide an overview of the NER 300 programme.

"Jiselle and the Royal Jelly": Power, Conflict and Culture in an Interdisciplinary Game Design Course

ERIC Educational Resources Information Center

Dickey, Michele D.

2010-01-01

With the rising popularity of digital games, a growing number of universities are developing programmes in various areas of digital design and interactive media to meet the needs for game-related courses. Faculty of this emerging field are grappling with the complexity of developing curricula which integrate art, design and technology and of…

Translations on Environmental Quality No. 124.

DTIC Science & Technology

1976-11-01

pollution is being drawn up, the Dewan Rakyat was told today. The programme consists of preventive and restorative measures and would be aimed against all...ENVIRONMENTAL QUALITY No. 124 CONTENTS PAGE ASIA MALAYSIA Malaysia Drafting Antipollution Program (NEW STRAITS TIMES, 17 Jul 76)... 1 EASTERN EUROPE...French, Swiss Experience and Projects Opponents of Nuclear Power Plants Appeal to Bonn Government MALAYSIA MALAYSIA DRAFTING ANTIPOLLUTION

"Troops to Teachers": Implications for the Coalition Government's Approach to Education Policy and Pedagogical Beliefs and Practice

ERIC Educational Resources Information Center

Tipping, Alan

2013-01-01

On taking power the coalition government embarked on what many commentators believe is a radical programme of public policy reform. Under Michael Gove, education policy has become totemic to those arguing that Britain's classrooms are mired in academic mediocrity and behavioural failure. One policy response by the government has been to propose…

Policy Development, Theory and Practice in Environmental Adult Education: Reflections on the Learning for Environmental Action Programme from 1995 to the Present

ERIC Educational Resources Information Center

Clover, Darlene E.

2006-01-01

Contemporary neo-conservative and globalisation practices and policies have a powerful impact on every aspect of human life. Policies enacted by the governments to accumulate wealth have destroyed natural environments like nothing before. As the negative impact of neo-conservatism and globalisation grew on people's lives and environment, the…

International Conference on Human Resource Development for Nuclear Power Programmes: Strategies for Education and Training, Networking and Knowledge Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pepper, Susan E.; Bachner, Katherine M.

The report includes a summary of the overall workshop results and also copies of the two papers and interactive presentations given by BNL staff at the meeting. The two presentations were titled ''The value of the Junior Professional Officer (JPO) program to the IAEA and its Member States'' and ''Promoting intercultural competencies''.

The Power of Beliefs: Lay Theories and Their Influence on the Implementation of CLIL Programmes

ERIC Educational Resources Information Center

Huttner, Julia; Dalton-Puffer, Christiane; Smit, Ute

2013-01-01

Content and Language Integrated Learning (CLIL) is one of the most dynamic pedagogic trends in language teaching in Europe, and yet, the enthusiasm with which this innovation is implemented by stakeholders and "made a success" is not fully understood. In this paper we argue for an investigation of CLIL implementation as a form of…

Contribution of the SPEED Programme to the Enhancement of an Enterprise Culture in a UK University

ERIC Educational Resources Information Center

Clements, Mike

2012-01-01

When the current UK coalition government came to power in 2010, it sought amongst other things to stimulate a dormant economy and deal with the national budget deficit. One of its first acts was to charge universities to become the bedrock for entrepreneurial activity, and to deliver challenging enterprise education to all their students, so…

Why gender matters in the solution towards safe sanitation? Reflections from rural India.

PubMed

Khanna, Tina; Das, Madhumita

2016-12-01

While the topic of women and water, sanitation and hygiene is a widely accepted concern among academics and activists, it continues to be an issue in developing countries with serious consequences. Based on a qualitative research conducted in rural Uttar Pradesh, India, the paper affirms that sanitation issues for women and girls are compounded by inequitable gender norms that put them at greater risk of experiencing violence and multiple health vulnerabilities. Women, despite having a high demand for safe toilet facilities, continue to practise unsafe sanitation. The findings highlight the role of three structural constraints as the key factors influencing toilet construction and use: poverty, inadequate sanitation policy and its implementation and gender-based power dynamics at the household level. The paper concludes by emphasising the relevance of engendering sanitation programmes and policies by involving women and girls in the planning process to ensure that dignified and gender-sensitive sanitation solutions are developed. The paper also stresses the need to have measures for strengthening and effectively implementing a sanitation policy for the poor and for programmes to work with both men and women to address gender power relations which influence toilet adoption and use.

Paper pump for passive and programmable transport

PubMed Central

Wang, Xiao; Hagen, Joshua A.; Papautsky, Ian

2013-01-01

In microfluidic systems, a pump for fluid-driving is often necessary. To keep the size of microfluidic systems small, a pump that is small in size, light-weight and needs no external power source is advantageous. In this work, we present a passive, simple, ultra-low-cost, and easily controlled pumping method based on capillary action of paper that pumps fluid through conventional polymer-based microfluidic channels with steady flow rate. By using inexpensive cutting tools, paper can be shaped and placed at the outlet port of a conventional microfluidic channel, providing a wide range of pumping rates. A theoretical model was developed to describe the pumping mechanism and aid in the design of paper pumps. As we show, paper pumps can provide steady flow rates from 0.3 μl/s to 1.7 μl/s and can be cascaded to achieve programmable flow-rate tuning during the pumping process. We also successfully demonstrate transport of the most common biofluids (urine, serum, and blood). With these capabilities, the paper pump has the potential to become a powerful fluid-driving approach that will benefit the fielding of microfluidic systems for point-of-care applications. PMID:24403999

Programmable permanent data storage characteristics of nanoscale thin films of a thermally stable aromatic polyimide.

PubMed

Kim, Dong Min; Park, Samdae; Lee, Taek Joon; Hahm, Suk Gyu; Kim, Kyungtae; Kim, Jin Chul; Kwon, Wonsang; Ree, Moonhor

2009-10-06

We have synthesized a new thermally and dimensionally stable polyimide, poly(4,4'-amino(4-hydroxyphenyl)diphenylene hexafluoroisopropylidenediphthalimide) (6F-HTPA PI). 6F-HTPA PI is soluble in organic solvents and is thus easily processed with conventional solution coating techniques to produce good quality nanoscale thin films. Devices fabricated with nanoscale thin PI films with thicknesses less than 77 nm exhibit excellent unipolar write-once-read-many-times (WORM) memory behavior with a high ON/OFF current ratio of up to 10(6), a long retention time and low power consumption, less than +/-3.0 V. Furthermore, these WORM characteristics were found to persist even at high temperatures up to 150 degrees C. The WORM memory behavior was found to be governed by trap-limited space-charge limited conduction and local filament formation. The conduction processes are dominated by hole injection. Thus the hydroxytriphenylamine moieties of the PI polymer might play a key role as hole trapping sites in the observed WORM memory behavior. The properties of 6F-HTPA PI make it a promising material for high-density and very stable programmable permanent data storage devices with low power consumption.

A programmable heater control circuit for spacecraft

NASA Technical Reports Server (NTRS)

Nguyen, D. D.; Owen, J. W.; Smith, D. A.; Lewter, W. J.

1994-01-01

Spacecraft thermal control is accomplished for many components through use of multilayer insulation systems, electrical heaters, and radiator systems. The heaters are commanded to maintain component temperatures within design specifications. The programmable heater control circuit (PHCC) was designed to obtain an effective and efficient means of spacecraft thermal control. The hybrid circuit provides use of control instrumentation as temperature data, available to the spacecraft central data system, reprogramming capability of the local microprocessor during the spacecraft's mission, and the elimination of significant spacecraft wiring. The hybrid integrated circuit has a temperature sensing and conditioning circuit, a microprocessor, and a heater power and control circuit. The device is miniature and housed in a volume which allows physical integration with the component to be controlled. Applications might include alternate battery-powered logic-circuit configurations. A prototype unit with appropriate physical and functional interfaces was procured for testing. The physical functionality and the feasibility of fabrication of the hybrid integrated circuit were successfully verified. The remaining work to develop a flight-qualified device includes fabrication and testing of a Mil-certified part. An option for completing the PHCC flight qualification testing is to enter into a joint venture with industry.

Field-programmable analogue arrays for the sensorless control of DC motors

NASA Astrophysics Data System (ADS)

Rivera, J.; Dueñas, I.; Ortega, S.; Del Valle, J. L.

2018-02-01

This work presents the analogue implementation of a sensorless controller for direct current motors based on the super-twisting (ST) sliding mode technique, by means of field programmable analogue arrays (FPAA). The novelty of this work is twofold, first is the use of the ST algorithm in a sensorless scheme for DC motors, and the implementation method of this type of sliding mode controllers in FPAAs. The ST algorithm reduces the chattering problem produced with the deliberate use of the sign function in classical sliding mode approaches. On the other hand, the advantages of the implementation method over a digital one are that the controller is not digitally approximated, the controller gains are not fine tuned and the implementation does not require the use of analogue-to-digital and digital-to-analogue converter circuits. In addition to this, the FPAA is a reconfigurable, lower cost and power consumption technology. Simulation and experimentation results were registered, where a more accurate transient response and lower power consumption were obtained by the proposed implementation method when compared to a digital implementation. Also, a more accurate performance by the DC motor is obtained with proposed sensorless ST technique when compared with a classical sliding mode approach.

Accelerating image recognition on mobile devices using GPGPU

NASA Astrophysics Data System (ADS)

Bordallo López, Miguel; Nykänen, Henri; Hannuksela, Jari; Silvén, Olli; Vehviläinen, Markku

2011-01-01

The future multi-modal user interfaces of battery-powered mobile devices are expected to require computationally costly image analysis techniques. The use of Graphic Processing Units for computing is very well suited for parallel processing and the addition of programmable stages and high precision arithmetic provide for opportunities to implement energy-efficient complete algorithms. At the moment the first mobile graphics accelerators with programmable pipelines are available, enabling the GPGPU implementation of several image processing algorithms. In this context, we consider a face tracking approach that uses efficient gray-scale invariant texture features and boosting. The solution is based on the Local Binary Pattern (LBP) features and makes use of the GPU on the pre-processing and feature extraction phase. We have implemented a series of image processing techniques in the shader language of OpenGL ES 2.0, compiled them for a mobile graphics processing unit and performed tests on a mobile application processor platform (OMAP3530). In our contribution, we describe the challenges of designing on a mobile platform, present the performance achieved and provide measurement results for the actual power consumption in comparison to using the CPU (ARM) on the same platform.

'Pure' drug users, commercial sex workers and 'ordinary girls': gendered narratives of HIV risk and prevention in post-Soviet Ukraine.

PubMed

Owczarzak, Jill; Phillips, Sarah D; Cho, Woojeong

2018-02-08

International best practices call for a gender-responsive approach to HIV prevention for women, including those who use drugs and those who engage in sex work. This paper draws on multiple qualitative data sources collected over five years in Ukraine to explore the notions of gender, women and family that buttress HIV-related programmes for women. Our analysis reveals that service providers often cast women as hapless victims of unfortunate family circumstances and troubled personal relationships that produce sudden poverty, or social strivers who seek access to wealth and privilege at the expense of their health. Women are portrayed as most vulnerable to HIV when they lack a male 'protector'. We argue that the programmes constituted around these stereotypes of women and their vulnerabilities reflect new forms of institutional power that deflect attention away from gendered socio-economic processes that contribute to women's HIV vulnerability, including job insecurity and unemployment, workplace discrimination, unreliable social benefits and power imbalances within their relationships. We explore how to transform HIV prevention efforts to better address the causes of women's increased vulnerability to HIV in Ukraine and in Eastern Europe more generally.

A Fully Integrated Wireless Compressed Sensing Neural Signal Acquisition System for Chronic Recording and Brain Machine Interface.

PubMed

Liu, Xilin; Zhang, Milin; Xiong, Tao; Richardson, Andrew G; Lucas, Timothy H; Chin, Peter S; Etienne-Cummings, Ralph; Tran, Trac D; Van der Spiegel, Jan

2016-07-18

Reliable, multi-channel neural recording is critical to the neuroscience research and clinical treatment. However, most hardware development of fully integrated, multi-channel wireless neural recorders to-date, is still in the proof-of-concept stage. To be ready for practical use, the trade-offs between performance, power consumption, device size, robustness, and compatibility need to be carefully taken into account. This paper presents an optimized wireless compressed sensing neural signal recording system. The system takes advantages of both custom integrated circuits and universal compatible wireless solutions. The proposed system includes an implantable wireless system-on-chip (SoC) and an external wireless relay. The SoC integrates 16-channel low-noise neural amplifiers, programmable filters and gain stages, a SAR ADC, a real-time compressed sensing module, and a near field wireless power and data transmission link. The external relay integrates a 32 bit low-power microcontroller with Bluetooth 4.0 wireless module, a programming interface, and an inductive charging unit. The SoC achieves high signal recording quality with minimized power consumption, while reducing the risk of infection from through-skin connectors. The external relay maximizes the compatibility and programmability. The proposed compressed sensing module is highly configurable, featuring a SNDR of 9.78 dB with a compression ratio of 8×. The SoC has been fabricated in a 180 nm standard CMOS technology, occupying 2.1 mm × 0.6 mm silicon area. A pre-implantable system has been assembled to demonstrate the proposed paradigm. The developed system has been successfully used for long-term wireless neural recording in freely behaving rhesus monkey.

Vagal modulation and symptomatology following a 6-month aerobic exercise program for women with fibromyalgia.

PubMed

Sañudo, Borja; Carrasco, Luis; de Hoyo, Moisés; Figueroa, Arturo; Saxton, John M

2015-01-01

To examine the effects of a supervised aerobic exercise programme on heart rate variability (HRV) parameters and symptom severity in women with fibromyalgia (FM). Thirty-two women with FM were randomly allocated to one of two groups: aerobic exercise (AE) or usual care control for 24 weeks. Women allocated to AE performed two aerobic exercise sessions per week of 45-60 min duration including 15-20 min of steady-state aerobic exercise at 60-65% of predicted maximum heart rate (HRmax) and 15 min of interval training at 75-80% HRmax (six repetitions of 1.5 min, with 1 min interpolated rest intervals). Cardiac autonomic modulation was assessed using power spectral analysis of HRV. Symptom severity was assessed by a 10 cm visual analogue scale (VAS) for pain, sleep disturbances, stiffness, anxiety and depression. After 24 weeks, the women in the exercise group showed an increase (4.8 ± 0.2 to 5.2 ± 0.2) in total power (LnTP, p<0.001), low frequency power (LnLF, p<0.01), high frequency power (LnHF, p<0.001), and the root-mean-square of successive R-R intervals (rMSSD, p<0.001). In addition, significant group-by-time interaction effects were observed for LnHF (p=0.036) and LnLF/HF (p=0.014). Improvements in anxiety and depression were also observed in AE versus control patients. These results show that a programme of aerobic exercise training induced changes in cardiac autonomic nervous system modulation in FM and that these changes in HRV parameters were accompanied by changes in anxiety and depression.

Effectiveness of the Power Dry-Land Training Programmes in Youth Swimmers

PubMed Central

Sadowski, Jerzy; Mastalerz, Andrzej; Gromisz, Wilhelm; NiŸnikowski, Tomasz

2012-01-01

The aim of the study was to evaluate the effects of the dry-land power training on swimming force, swimming performance and strength in youth swimmers. Twenty six male swimmers, free from injuries and training regularly at least 6 times a week, were enrolled in the study and randomly assigned to one of two groups: experimental (n=14, mean age 14.0 ± 0.5 yrs, mean height 1.67±0.08 m and mean body mass 55.71 ±9.55 kg) and control (n=12, mean age 14.1 ± 0.5 yrs, mean height 1.61±0.11 m and mean body mass 49.07 ±8.25 kg). The experimental group took part in a combined swimming and dry-land power training. The control group took part in swimming training only. The training programmes in water included a dominant aerobic work in front crawl. In this research the experimental group tended to present slightly greater improvements in sprint performance. However, the stroke frequency insignificantly decreased (−4.30%, p>0.05) in the experimental group and increased (6.28%, p>0.05) in the control group. The distance per stroke insignificantly increased in the experimental group (5.98%, p>0.05) and insignificantly decreased in the control group (−5.36%, p>0.05). A significant improvement of tethered swimming force for the experimental group (9.64%, p<0.02) was found, whereas the increase was not statistically significant in the control group (2.86%, p>0.05). The main data cannot clearly state that power training allowed an enhancement in swimming performance, although a tendency to improve swimming performance in tethered swimming was noticed. PMID:23486353

Solid state control system for oil well bailer pump

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senghaas, K. A.; Senghaas, P.

1985-05-14

A solid state switching controller for use with various types of oil well bailer pumps. Individually programmable steps with lockouts provide multiple mutual exclusivity between various circuit operations. A trickle charge battery system powers the control circuits. A tank overflow float protects against oil spillage. An automatic production rate adjustment circuit is provided which increases cycle time in proportion to the rate of production. The circuit includes a low power voltage detector for disabling the control circuits until the line voltage is acceptable. A three-phase power and control system with an isolation transformer for the controls avoids unreliable ground connections.more » The timers include a dividing circuit with an RC circuit. All power actuated apparatus are actuated by triac switches which are controlled by an opto driver. The bailer brake is pulse actuated for allowing the bailer to sink into crude oil without excess cable looseness.« less

A Small-Area and Low-Power SoC for Less-Invasive Pressure Sensing Capsules in Ambulatory Urodynamic Monitoring

NASA Astrophysics Data System (ADS)

Iwato, Hirofumi; Sakanushi, Keishi; Takeuchi, Yoshinori; Imai, Masaharu

To measure the detrusor pressure for diagnosing lower urinary tract symptoms, we designed a small-area and low-power System on a Chip (SoC). The SoC should be small and low power because it is encapsulated in tiny air-tight capsules which are simultaneously inserted in the urinary bladder and rectum for several days. Since the SoC is also required to be programmable, we designed an Application Specific Instruction set Processor (ASIP) for pressure measurement and wireless communication, and implemented almost required functions on the ASIP. The SoC was fabricated using a 0.18µm CMOS mixed-signal process and the chip size is 2.5×2.5mm2. Evaluation results show that the power consumption of the SoC is 93.5µW, and that it can operate the capsule for seven days with a tiny battery.

Regulatory requirements for nuclear power plant site selection in Malaysia-a review.

PubMed

Basri, N A; Hashim, S; Ramli, A T; Bradley, D A; Hamzah, K

2016-12-01

Malaysia has initiated a range of pre-project activities in preparation for its planned nuclear power programme. Clearly one of the first steps is the selection of sites that are deemed suitable for the construction and operation of a nuclear power plant. Here we outline the Malaysian regulatory requirements for nuclear power plant site selection, emphasizing details of the selection procedures and site characteristics needed, with a clear focus on radiation safety and radiation protection in respect of the site surroundings. The Malaysia Atomic Energy Licensing Board (AELB) site selection guidelines are in accord with those provided in International Atomic Energy Agency (IAEA) and United Stated Nuclear Regulatory Commission (USNRC) documents. To enhance the suitability criteria during selection, as well as to assist in the final decision making process, possible assessments using the site selection characteristics and information are proposed.

The value of materials R&D in the fast track development of fusion power

NASA Astrophysics Data System (ADS)

Ward, D. J.; Taylor, N. P.; Cook, I.

2007-08-01

The objective of the international fusion program is the creation of power plants with attractive safety and environmental features and viable economics. There is a range of possible plants that can meet these objectives, as studied for instance in the recent EU studies of power plant concepts. All of the concepts satisfy safety and environmental objectives but the economic performance is interpreted differently in different world regions according to the perception of future energy markets. This leads to different materials performance targets and the direction and timescales of the materials development programme needed to meet those targets. In this paper, the implications for materials requirements of a fast track approach to fusion development are investigated. This includes a quantification of the overall benefits of more advanced materials: including the effect of trading off an extended development time against a reduced cost of electricity for resulting power plants.

High-voltage, high-power, solid-state remote power controllers for aerospace applications

NASA Technical Reports Server (NTRS)

Sturman, J. C.

1985-01-01

Two general types of remote power controller (RPC) that combine the functions of a circuit breaker and a switch were developed for use in direct-current (dc) aerospace systems. Power-switching devices used in these designs are the relatively new gate-turnoff thyristor (GTO) and poweer metal-oxide-semiconductor field-effect transistors (MOSFET). The various RPC's can switch dc voltages to 1200 V and currents to 100 A. Seven different units were constructed and subjected to comprehensive laboratory and thermal vacuum testing. Two of these were dual units that switch both positive and negative voltages simultaneously. The RPC's using MOSFET's have slow turnon and turnoff times to limit voltage spiking from high di/dt. The GTO's have much faster transition times. All RPC's have programmable overload tripout and microsecond tripout for large overloads. The basic circuits developed can be used to build switchgear limited only by the ratings of the switching device used.

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. E. Lawson, R. Marsala, S. Ramakrishnan, X. Zhao, P. Sichta

In order to provide improved and expanded experimental capabilities, the existing Transrex power supplies at PPPL are to be upgraded and modernized. Each of the 39 power supplies consists of two six pulse silicon controlled rectifier sections forming a twelve pulse power supply. The first modification is to split each supply into two independent six pulse supplies by replacing the existing obsolete twelve pulse firing generator with two commercially available six pulse firing generators. The second change replaces the existing control link with a faster system, with greater capacity, which will allow for independent control of all 78 power supplymore » sections. The third change replaces the existing Computer Automated Measurement and Control (CAMAC) based fault detector with an Experimental Physics and Industrial Control System (EPICS) compatible unit, eliminating the obsolete CAMAC modules. Finally the remaining relay logic and interfaces to the "Hardwired Control System" will be replaces with a Programmable Logic Controller (PLC).« less

Inexpensive programmable clock for a 12-bit computer

NASA Technical Reports Server (NTRS)

Vrancik, J. E.

1972-01-01

An inexpensive programmable clock was built for a digital PDP-12 computer. The instruction list includes skip on flag; clear the flag, clear the clock, and stop the clock; and preset the counter with the contents of the accumulator and start the clock. The clock counts at a rate determined by an external oscillator and causes an interrupt and sets a flag when a 12-bit overflow occurs. An overflow can occur after 1 to 4096 counts. The clock can be built for a total parts cost of less than $100 including power supply and I/O connector. Slight modification can be made to permit its use on larger machines (16 bit, 24 bit, etc.) and logic level shifting can be made to make it compatible with any computer.

Programmable logic controller performance enhancement by field programmable gate array based design.

PubMed

Patel, Dhruv; Bhatt, Jignesh; Trivedi, Sanjay

2015-01-01

PLC, the core element of modern automation systems, due to serial execution, exhibits limitations like slow speed and poor scan time. Improved PLC design using FPGA has been proposed based on parallel execution mechanism for enhancement of performance and flexibility. Modelsim as simulation platform and VHDL used to translate, integrate and implement the logic circuit in FPGA. Xilinx's Spartan kit for implementation-testing and VB has been used for GUI development. Salient merits of the design include cost-effectiveness, miniaturization, user-friendliness, simplicity, along with lower power consumption, smaller scan time and higher speed. Various functionalities and applications like typical PLC and industrial alarm annunciator have been developed and successfully tested. Results of simulation, design and implementation have been reported. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Digital high speed programmable convolver

NASA Astrophysics Data System (ADS)

Rearick, T. C.

1984-12-01

A circuit module for rapidly calculating a discrete numerical convolution is described. A convolution such as finding the sum of the products of a 16 bit constant and a 16 bit variable is performed by a module which is programmable so that the constant may be changed for a new problem. In addition, the module may be programmed to find the sum of the products of 4 and 8 bit constants and variables. RAM (Random Access Memories) are loaded with partial products of the selected constant and all possible variables. Then, when the actual variable is loaded, it acts as an address to find the correct partial product in the particular RAM. The partial products from all of the RAMs are shifted to the appropriate numerical power position (if necessary) and then added in adder elements.

Pulse transmission transmitter including a higher order time derivate filter

DOEpatents

Dress, Jr., William B.; Smith, Stephen F.

2003-09-23

Systems and methods for pulse-transmission low-power communication modes are disclosed. A pulse transmission transmitter includes: a clock; a pseudorandom polynomial generator coupled to the clock, the pseudorandom polynomial generator having a polynomial load input; an exclusive-OR gate coupled to the pseudorandom polynomial generator, the exclusive-OR gate having a serial data input; a programmable delay circuit coupled to both the clock and the exclusive-OR gate; a pulse generator coupled to the programmable delay circuit; and a higher order time derivative filter coupled to the pulse generator. The systems and methods significantly reduce lower-frequency emissions from pulse transmission spread-spectrum communication modes, which reduces potentially harmful interference to existing radio frequency services and users and also simultaneously permit transmission of multiple data bits by utilizing specific pulse shapes.

Field programmable gate array processing of eye-safe all-fiber coherent wind Doppler lidar return signals

NASA Astrophysics Data System (ADS)

Abdelazim, S.; Santoro, D.; Arend, M.; Moshary, F.; Ahmed, S.

2011-11-01

A field deployable all-fiber eye-safe Coherent Doppler LIDAR is being developed at the Optical Remote Sensing Lab at the City College of New York (CCNY) and is designed to monitor wind fields autonomously and continuously in urban settings. Data acquisition is accomplished by sampling lidar return signals at 400 MHz and performing onboard processing using field programmable gate arrays (FPGAs). The FPGA is programmed to accumulate signal information that is used to calculate the power spectrum of the atmospherically back scattered signal. The advantage of using FPGA is that signal processing will be performed at the hardware level, reducing the load on the host computer and allowing for 100% return signal processing. An experimental setup measured wind speeds at ranges of up to 3 km.

Design techniques for a stable operation of cryogenic field-programmable gate arrays.

PubMed

Homulle, Harald; Visser, Stefan; Patra, Bishnu; Charbon, Edoardo

2018-01-01

In this paper, we show how a deep-submicron field-programmable gate array (FPGA) can be operated more stably at extremely low temperatures through special firmware design techniques. Stability at low temperatures is limited through long power supply wires and reduced performance of various printed circuit board components commonly employed at room temperature. Extensive characterization of these components shows that the majority of decoupling capacitor types and voltage regulators are not well behaved at cryogenic temperatures, asking for an ad hoc solution to stabilize the FPGA supply voltage, especially for sensitive applications. Therefore, we have designed a firmware that enforces a constant power consumption, so as to stabilize the supply voltage in the interior of the FPGA. The FPGA is powered with a supply at several meters distance, causing significant resistive voltage drop and thus fluctuations on the local supply voltage. To achieve the stabilization, the variation in digital logic speed, which directly corresponds to changes in supply voltage, is constantly measured and corrected for through a tunable oscillator farm, implemented on the FPGA. The impact of the stabilization technique is demonstrated together with a reconfigurable analog-to-digital converter (ADC), completely implemented in the FPGA fabric and operating at 15 K. The ADC performance can be improved by at most 1.5 bits (effective number of bits) thanks to the more stable supply voltage. The method is versatile and robust, enabling seamless porting to other FPGA families and configurations.

VLSI Design of Trusted Virtual Sensors.

PubMed

Martínez-Rodríguez, Macarena C; Prada-Delgado, Miguel A; Brox, Piedad; Baturone, Iluminada

2018-01-25

This work presents a Very Large Scale Integration (VLSI) design of trusted virtual sensors providing a minimum unitary cost and very good figures of size, speed and power consumption. The sensed variable is estimated by a virtual sensor based on a configurable and programmable PieceWise-Affine hyper-Rectangular (PWAR) model. An algorithm is presented to find the best values of the programmable parameters given a set of (empirical or simulated) input-output data. The VLSI design of the trusted virtual sensor uses the fast authenticated encryption algorithm, AEGIS, to ensure the integrity of the provided virtual measurement and to encrypt it, and a Physical Unclonable Function (PUF) based on a Static Random Access Memory (SRAM) to ensure the integrity of the sensor itself. Implementation results of a prototype designed in a 90-nm Complementary Metal Oxide Semiconductor (CMOS) technology show that the active silicon area of the trusted virtual sensor is 0.86 mm 2 and its power consumption when trusted sensing at 50 MHz is 7.12 mW. The maximum operation frequency is 85 MHz, which allows response times lower than 0.25 μ s. As application example, the designed prototype was programmed to estimate the yaw rate in a vehicle, obtaining root mean square errors lower than 1.1%. Experimental results of the employed PUF show the robustness of the trusted sensing against aging and variations of the operation conditions, namely, temperature and power supply voltage (final value as well as ramp-up time).

Magnetics and Power System Upgrades for the Pegasus-U Experiment

NASA Astrophysics Data System (ADS)

Preston, R. C.; Bongard, M. W.; Fonck, R. J.; Lewicki, B. T.

2014-10-01

To support the missions of developing local helicity injection startup and exploiting advanced tokamak physics studies at near unity aspect ratio, the proposed Pegasus-U will include expanded magnetic systems and associated power supplies. A new centerstack increases the toroidal field seven times to 1 T and the volt-seconds by a factor of six while maintaining operation at an aspect ratio of 1.2. The poloidal field magnet system is expanded to support improved shape control and robust double or single null divertor operation at the full plasma current of 0.3 MA. An integrated digital control system based on Field Programmable Gate Arrays (FPGAs) provides active feedback control of all magnet currents. Implementation of the FPGAs is achieved with modular noise reducing electronics. The digital feedback controllers replace the existing analog systems and switch multiplexing technology. This will reduce noise sensitivity and allow the operational Ohmic power supply voltage to increase from 2100 V to its maximum capacity of 2400 V. The feedback controller replacement also allows frequency control for ``freewheeling''--stopping the switching for a short interval and allowing the current to coast. The FPGAs assist in optimizing pulse length by having programmable switching events to minimize energy losses. They also allow for more efficient switching topologies that provide improved stored energy utilization, and support increasing the pulse length from 25 ms to 50-100 ms. Work supported by US DOE Grant DE-FG02-96ER54375.

Design techniques for a stable operation of cryogenic field-programmable gate arrays

NASA Astrophysics Data System (ADS)

Homulle, Harald; Visser, Stefan; Patra, Bishnu; Charbon, Edoardo

2018-01-01

In this paper, we show how a deep-submicron field-programmable gate array (FPGA) can be operated more stably at extremely low temperatures through special firmware design techniques. Stability at low temperatures is limited through long power supply wires and reduced performance of various printed circuit board components commonly employed at room temperature. Extensive characterization of these components shows that the majority of decoupling capacitor types and voltage regulators are not well behaved at cryogenic temperatures, asking for an ad hoc solution to stabilize the FPGA supply voltage, especially for sensitive applications. Therefore, we have designed a firmware that enforces a constant power consumption, so as to stabilize the supply voltage in the interior of the FPGA. The FPGA is powered with a supply at several meters distance, causing significant resistive voltage drop and thus fluctuations on the local supply voltage. To achieve the stabilization, the variation in digital logic speed, which directly corresponds to changes in supply voltage, is constantly measured and corrected for through a tunable oscillator farm, implemented on the FPGA. The impact of the stabilization technique is demonstrated together with a reconfigurable analog-to-digital converter (ADC), completely implemented in the FPGA fabric and operating at 15 K. The ADC performance can be improved by at most 1.5 bits (effective number of bits) thanks to the more stable supply voltage. The method is versatile and robust, enabling seamless porting to other FPGA families and configurations.

VLSI Design of Trusted Virtual Sensors

PubMed Central

2018-01-01

This work presents a Very Large Scale Integration (VLSI) design of trusted virtual sensors providing a minimum unitary cost and very good figures of size, speed and power consumption. The sensed variable is estimated by a virtual sensor based on a configurable and programmable PieceWise-Affine hyper-Rectangular (PWAR) model. An algorithm is presented to find the best values of the programmable parameters given a set of (empirical or simulated) input-output data. The VLSI design of the trusted virtual sensor uses the fast authenticated encryption algorithm, AEGIS, to ensure the integrity of the provided virtual measurement and to encrypt it, and a Physical Unclonable Function (PUF) based on a Static Random Access Memory (SRAM) to ensure the integrity of the sensor itself. Implementation results of a prototype designed in a 90-nm Complementary Metal Oxide Semiconductor (CMOS) technology show that the active silicon area of the trusted virtual sensor is 0.86 mm2 and its power consumption when trusted sensing at 50 MHz is 7.12 mW. The maximum operation frequency is 85 MHz, which allows response times lower than 0.25 μs. As application example, the designed prototype was programmed to estimate the yaw rate in a vehicle, obtaining root mean square errors lower than 1.1%. Experimental results of the employed PUF show the robustness of the trusted sensing against aging and variations of the operation conditions, namely, temperature and power supply voltage (final value as well as ramp-up time). PMID:29370141

Energy policy of the Czech Republic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cerny, M.

1995-12-01

On February 16, 1992, the Government of the Czech Republic sanctioned, by its Decree No. 112/82, its first Energy Policy. Since that time, a number of conditions have changed: first of all, there was the partition of the former Federal Czechoslovak Republic, then the privatization of most of energy producing corporations, the deregulation of a significant proportion of power and energy commodities, the decision to bring to an end the construction of the Temelin nuclear power station, the creation of conditions for the construction of the Ingoldstadt oil pipeline, etc. These steps, on which the final decisions have been made,more » have brought about the necessity of updating the existing general Energy Policy. The updated Energy Policy is based on the Programme Statement by the Government of the Czech Republic of July 1992, as well as on other materials associated with energy and power generation, either approved or negotiated by the Government, in particular the State Environmental Policy the Rules of the State Raw Materials Policy, the European Association Agreement, the European Energy Charter, the results of the Uruguayan Round of GATT, the Convention on Climate Changes, the Ecological Action Programme for central and East-European countries, and other international documents that have either been, or are likely to be sanctioned by the Czech Government (especially the European Energy Charter Treaty, and the protocol on Trans-boundary Air Pollution and on Further Reduction of Sulphur Oxide Emissions).« less

Assessing the Food Safety Attitudes and Awareness of Managers of School Feeding Programmes in Mpumalanga, South Africa.

PubMed

Sibanyoni, J J; Tabit, F T

2017-08-01

The managers of school feeding programmes are responsible for ensuring the safety of the food which is provided to schoolchildren, but very few studies have been conducted on the food safety knowledge and awareness of these managers. The objective of this study is to evaluate the food safety attitudes and awareness of managers of the National School Nutrition Programme (NSNP) in schools in Mpumalanga, a province of South Africa. A cross-sectional survey study was conducted in which questionnaires were used to collect data from 300 NSNP food service managers. The majority of schools offering NSNP meals were located in informal settlements and most were found to lack basic resources such as electricity (power supplies to the food preparation facility) and potable tap water in their kitchens. No school was found to have implemented the hazard analysis and critical control points (HACCP) programme, and only a few staff had received food safety training. Food safety implementation is worst in informal schools in rural areas due to limited resources and infrastructure. The NSNP food service managers in some schools-especially those located in rural settlements-were found to have little knowledge and awareness of HACCP. These results indicate an urgent need to provide NSNP managers with food safety training and resources (potable water supplies, electricity, dedicated food preparation facilities), particularly in schools in rural settlements.

Maximal power training induced different improvement in throwing velocity and muscle strength according to playing positions in elite male handball players

PubMed Central

Chtourou, H; Souissi, N; Aouidet, A; Chamari, K

2016-01-01

This study was designed to assess the effect of strength and power training on throwing velocity and muscle strength in handball players according to their playing positions. Twenty-two male handball players were assigned to either an experimental group (n=11) or a control group (n=11) (age: 22.1 ± 3.0 years). They were asked to complete (i) the ball throwing velocity test and (ii) the one-repetition maximum (1-RM) tests for the half-back squat, the pull-over, the bench press, the developed neck, and the print exercises before and after 12 weeks of maximal power training. The training was designed to improve strength and power with an intensity of 85-95% of the 1RM. In addition to their usual routine handball training sessions, participants performed two sessions per week. During each session, they performed 3-5 sets of 3-8 repetitions with 3 min of rest in between. Then, they performed specific shots (i.e., 12 to 40). Ball-throwing velocity (p<0.001) was higher after the training period in rear line players (RL). The training programme resulted in an improvement of 1RM bench press (p<0.001), 1RM developed neck (p<0.001) and 1RM print (p<0.001) in both front line (FL) and RL. The control group showed a significant improvement only in ball-throwing velocity (p<0.01) and 1RM bench press (p<0.01) in RL. A significantly greater improvement was found in ball-throwing velocity (p<0.001), 1RM bench press (p<0.001), and 1RM half-back squat exercises in players of the central axis (CA) compared to the lateral axis (LA) (p<0.01). The power training programme induced significantly greater increases in ball-throwing velocity and muscle strength in FL than RL and in CA than LA axis players. PMID:28090144

Maximal power training induced different improvement in throwing velocity and muscle strength according to playing positions in elite male handball players.

PubMed

Cherif, M; Chtourou, H; Souissi, N; Aouidet, A; Chamari, K

2016-12-01

This study was designed to assess the effect of strength and power training on throwing velocity and muscle strength in handball players according to their playing positions. Twenty-two male handball players were assigned to either an experimental group (n=11) or a control group (n=11) (age: 22.1 ± 3.0 years). They were asked to complete (i) the ball throwing velocity test and (ii) the one-repetition maximum (1-RM) tests for the half-back squat, the pull-over, the bench press, the developed neck, and the print exercises before and after 12 weeks of maximal power training. The training was designed to improve strength and power with an intensity of 85-95% of the 1RM. In addition to their usual routine handball training sessions, participants performed two sessions per week. During each session, they performed 3-5 sets of 3-8 repetitions with 3 min of rest in between. Then, they performed specific shots (i.e., 12 to 40). Ball-throwing velocity (p<0.001) was higher after the training period in rear line players (RL). The training programme resulted in an improvement of 1RM bench press (p<0.001), 1RM developed neck (p<0.001) and 1RM print (p<0.001) in both front line (FL) and RL. The control group showed a significant improvement only in ball-throwing velocity (p<0.01) and 1RM bench press (p<0.01) in RL. A significantly greater improvement was found in ball-throwing velocity (p<0.001), 1RM bench press (p<0.001), and 1RM half-back squat exercises in players of the central axis (CA) compared to the lateral axis (LA) (p<0.01). The power training programme induced significantly greater increases in ball-throwing velocity and muscle strength in FL than RL and in CA than LA axis players.

Developing the European Center of Competence on VVER-type nuclear power reactors

NASA Astrophysics Data System (ADS)

Geraskin, Nikolay; Pironkov, Lyubomir; Kulikov, Evgeny; Glebov, Vasily

2017-09-01

This paper presents the results of the European educational projects CORONA and CORONA-II which are dedicated to preserving and further developing nuclear knowledge and competencies in the area of VVER-type nuclear power reactors technologies (Water-Water Energetic Reactor, WWER or VVER). The development of the European Center of Competence for VVER-technology is focused on master's degree programmes. The specifics of a systematic approach to training in the area of VVER-type nuclear power reactors technologies are analysed. This paper discusses enhancement of the training opportunities of the European Center that have arisen from advances in methodology and distance education. With a special attention paid to the European Nuclear Education Network (ENEN), the possibilities of further development of the international cooperation between European countries and educational institutions are examined.

Design of a Closed-Loop, Bidirectional Brain Machine Interface System With Energy Efficient Neural Feature Extraction and PID Control.

PubMed

Liu, Xilin; Zhang, Milin; Richardson, Andrew G; Lucas, Timothy H; Van der Spiegel, Jan

2017-08-01

This paper presents a bidirectional brain machine interface (BMI) microsystem designed for closed-loop neuroscience research, especially experiments in freely behaving animals. The system-on-chip (SoC) consists of 16-channel neural recording front-ends, neural feature extraction units, 16-channel programmable neural stimulator back-ends, in-channel programmable closed-loop controllers, global analog-digital converters (ADC), and peripheral circuits. The proposed neural feature extraction units includes 1) an ultra low-power neural energy extraction unit enabling a 64-step natural logarithmic domain frequency tuning, and 2) a current-mode action potential (AP) detection unit with time-amplitude window discriminator. A programmable proportional-integral-derivative (PID) controller has been integrated in each channel enabling a various of closed-loop operations. The implemented ADCs include a 10-bit voltage-mode successive approximation register (SAR) ADC for the digitization of the neural feature outputs and/or local field potential (LFP) outputs, and an 8-bit current-mode SAR ADC for the digitization of the action potential outputs. The multi-mode stimulator can be programmed to perform monopolar or bipolar, symmetrical or asymmetrical charge balanced stimulation with a maximum current of 4 mA in an arbitrary channel configuration. The chip has been fabricated in 0.18 μ m CMOS technology, occupying a silicon area of 3.7 mm 2 . The chip dissipates 56 μW/ch on average. General purpose low-power microcontroller with Bluetooth module are integrated in the system to provide wireless link and SoC configuration. Methods, circuit techniques and system topology proposed in this work can be used in a wide range of relevant neurophysiology research, especially closed-loop BMI experiments.

FPGA-Based X-Ray Detection and Measurement for an X-Ray Polarimeter

NASA Technical Reports Server (NTRS)

Gregory, Kyle; Hill, Joanne; Black, Kevin; Baumgartner, Wayne

2013-01-01

This technology enables detection and measurement of x-rays in an x-ray polarimeter using a field-programmable gate array (FPGA). The technology was developed for the Gravitational and Extreme Magnetism Small Explorer (GEMS) mission. It performs precision energy and timing measurements, as well as rejection of non-x-ray events. It enables the GEMS polarimeter to detect precisely when an event has taken place so that additional measurements can be made. The technology also enables this function to be performed in an FPGA using limited resources so that mass and power can be minimized while reliability for a space application is maximized and precise real-time operation is achieved. This design requires a low-noise, charge-sensitive preamplifier; a highspeed analog to digital converter (ADC); and an x-ray detector with a cathode terminal. It functions by computing a sum of differences for time-samples whose difference exceeds a programmable threshold. A state machine advances through states as a programmable number of consecutive samples exceeds or fails to exceed this threshold. The pulse height is recorded as the accumulated sum. The track length is also measured based on the time from the start to the end of accumulation. For track lengths longer than a certain length, the algorithm estimates the barycenter of charge deposit by comparing the accumulator value at the midpoint to the final accumulator value. The design also employs a number of techniques for rejecting background events. This innovation enables the function to be performed in space where it can operate autonomously with a rapid response time. This implementation combines advantages of computing system-based approaches with those of pure analog approaches. The result is an implementation that is highly reliable, performs in real-time, rejects background events, and consumes minimal power.

Improving women's nutrition imperative for rapid reduction of childhood stunting in South Asia: coupling of nutrition specific interventions with nutrition sensitive measures essential.

PubMed

Vir, Sheila C

2016-05-01

The implications of direct nutrition interventions on women's nutrition, birth outcome and stunting rates in children in South Asia are indisputable and well documented. In the last decade, a number of studies present evidence of the role of non-nutritional factors impacting on women's nutrition, birth outcome, caring practices and nutritional status of children. The implications of various dimensions of women's empowerment and gender inequality on child stunting is being increasingly recognised. Evidence reveals the crucial role of early age of marriage and conception, poor secondary education, domestic violence, inadequate decision-making power, poor control over resources, strenuous agriculture activities, and increasing employment of women and of interventions such as cash transfer scheme and microfinance programme on undernutrition in children. Analysis of the nutrition situation of women and children in South Asia and programme findings emphasise the significance of reaching women during adolescence, pre-conception and pregnancy stage. Ensuring women enter pregnancy with adequate height and weight and free from being anemic is crucial. Combining nutrition-specific interventions with measures for empowerment of women is essential. Improvement in dietary intake and health services of women, prevention of early age marriage and conception, completion of secondary education, enhancement in purchasing power of women, reduction of work drudgery and elimination of domestic violence deserve special attention. A range of programme platforms dealing with health, education and empowerment of women could be strategically used for effectively reaching women prior to and during pregnancy to accelerate reduction in stunting rates in children in South Asia. © 2016 The Authors. Maternal & Child Nutrition published by John Wiley & Sons Ltd.

May I see your ID, please? An explorative study of the professional identity of undergraduate medical education leaders.

PubMed

Sundberg, Kristina; Josephson, Anna; Reeves, Scott; Nordquist, Jonas

2017-02-01

The mission of undergraduate medical education leaders is to strive towards the enhancement of quality of medical education and health care. The aim of this qualitative study is, with the help of critical perspectives, to contribute to the research area of undergraduate medical education leaders and their identity formation; how can the identity of undergraduate medical education leaders be defined and further explored from a power perspective? In this explorative study, 14 educational leaders at a medical programme in Scandinavia were interviewed through semi-structured interviews. The data was analysed through Moustakas' structured, phenomenological analysis approach and then pattern matched with Gee's power-based identity model. Educational leaders identify themselves more as mediators than leaders and do not feel to any larger extent that their professional identity is authorised by the university. These factors potentially create difficulties when trying to communicate with medical teachers, often also with a weaker sense of professional identity, about medical education. The perceptions of the professional identity of undergraduate medical education leaders provide us with important notions on the complexities on executing their important mission to develop medical education: their perceptions of ambiguity towards the process of trying to lead teachers toward educational development and a perceived lack of authorisation of their work from the university level. These are important flaws to observe and correct when improving the context in which undergraduate medical education leaders are trying to develop and improve undergraduate medical programmes. A practical outcome of the results of this study is the facilitation of design of faculty development programmes for educational leaders in undergraduate medial education.

The Efficacy of an 8-Week Concurrent Strength and Endurance Training Programme on Hand Cycling Performance.

PubMed

Nevin, Jonpaul; Waldron, Mark; Patterson, Stephen; Smith, Paul; Price, Mike; Hunt, Alex

2018-03-20

The aim of the present study was to investigate the effects of an 8-week concurrent strength and endurance training programme in comparison to endurance training only on several key determinants of hand cycling performance. Five H4 and five H3 classified hand cyclists with at least one year's hand cycling training history consented to participate in the study. Subjects underwent a battery of tests to establish body mass, body composition, VO2peak, maximum aerobic power, gross mechanical efficiency, maximal upper body strength, and 30 km time trial performance. Subjects were matched into pairs based upon 30 km time trial performance and randomly allocated to either a concurrent strength and endurance or endurance training only, intervention group. Following an 8-week training programme based upon a conjugated block periodisation model, subjects completed a second battery of tests. A mixed model, 2-way analysis of variance (ANOVA) revealed no significant changes between groups. However, the calculation of effect sizes (ES) revealed that both groups demonstrated a positive improvement in most physiological and performance measures with subjects in the concurrent group demonstrating a greater magnitude of improvement in body composition (ES -0.80 vs. -0.22) maximal aerobic power (ES 0.97 vs. 0.28), gross mechanical efficiency (ES 0.87 vs. 0.63), bench press 1 repetition maximum (ES 0.53 vs. 0.33), seated row 1 repetition maximum (ES 1.42 vs. 0.43), and 30 km time trial performance (ES -0.66 vs. -0.30). In comparison to endurance training only, an 8-week concurrent training intervention based upon a conjugated block periodisation model appears to be a more effective training regime for improving the performance capabilities of hand cyclists.

Intimate partner violence, relationship power inequity, and incidence of HIV infection in young women in South Africa: a cohort study.

PubMed

Jewkes, Rachel K; Dunkle, Kristin; Nduna, Mzikazi; Shai, Nwabisa

2010-07-03

Cross-sectional studies have shown that intimate partner violence and gender inequity in relationships are associated with increased prevalence of HIV in women. Yet temporal sequence and causality have been questioned, and few HIV prevention programmes address these issues. We assessed whether intimate partner violence and relationship power inequity increase risk of incident HIV infection in South African women. We did a longitudinal analysis of data from a previously published cluster-randomised controlled trial undertaken in the Eastern Cape province of South Africa in 2002-06. 1099 women aged 15-26 years who were HIV negative at baseline and had at least one additional HIV test over 2 years of follow-up were included in the analysis. Gender power equity and intimate partner violence were measured by a sexual relationship power scale and the WHO violence against women instrument, respectively. Incidence rate ratios (IRRs) of HIV acquisition at 2 years were derived from Poisson models, adjusted for study design and herpes simplex virus type 2 infection, and used to calculate population attributable fractions. 128 women acquired HIV during 2076 person-years of follow-up (incidence 6.2 per 100 person-years). 51 of 325 women with low relationship power equity at baseline acquired HIV (8.5 per 100 person-years) compared with 73 of 704 women with medium or high relationship power equity (5.5 per 100 person-years); adjusted multivariable Poisson model IRR 1.51, 95% CI 1.05-2.17, p=0.027. 45 of 253 women who reported more than one episode of intimate partner violence at baseline acquired HIV (9.6 per 100 person-years) compared with 83 of 846 who reported one or no episodes (5.2 per 100 person-years); adjusted multivariable Poisson model IRR 1.51, 1.04-2.21, p=0.032. The population attributable fractions were 13.9% (95% CI 2.0-22.2) for relationship power equity and 11.9% (1.4-19.3) for intimate partner violence. Relationship power inequity and intimate partner violence increase risk of incident HIV infection in young South African women. Policy, interventions, and programmes for HIV prevention must address both of these risk factors and allocate appropriate resources. National Institute of Mental Health and South African Medical Research Council. Copyright 2010 Elsevier Ltd. All rights reserved.

An improved scan laser with a VO2 programmable mirror

NASA Astrophysics Data System (ADS)

Chivian, J. S.; Scott, M. W.; Case, W. E.; Krasutsky, N. J.

1985-04-01

A 10.6-microns scan laser has been constructed and operated with an off-axis cathode ray tube, high reflectance multilayer thin-film structures, and a tapered plasma discharge tube. Equations are given for the switching time of a high-reflectance spot on the VO2 and for the relation of scan laser output power to cavity geometry, cavity losses, and the gain of the active CO2 medium. A scan capability of 2100 easily resolvable directions was demonstrated, and sequential and randomly addressed spot rates of 100,000/sec were achieved. The equations relating output power and cavity mode size were experimentally verified using a nonscanned beam.

Programmable Pacemaker

NASA Technical Reports Server (NTRS)

1996-01-01

Released in 1995, the Trilogy cardiac pacemaker is the fourth generation of a unit developed in the 1970s by NASA, Johns Hopkins Applied Physics Laboratory and St. Jude Medical's Cardiac Rhythm Management Division (formerly known as Pacesetter Systems, Inc.). The new system incorporates the company's PDx diagnostic and programming software and a powerful microprocessor that allows more functions to be fully automatic and gives more detailed information on the patient's health and the performance of the pacing systems. The pacemaker incorporates bidirectional telemetry used for space communications for noninvasive communication with the implanted pacemaker, smaller implantable pulse generators from space microminiaturization, and longer-life batteries from technology for spacecraft electrical power systems.

Mathematics: A Powerful Pre- and Post-Admission Variable to Predict Success in Engineering Programmes at a University of Technology

ERIC Educational Resources Information Center

van Wyk, Barend; Hofman, Wiecher; Louw, Cecilia

2013-01-01

Although student attrition and retention are researched all over the world, there is no final formula available to ensure academic success for selected students. The purpose is to share research undertaken at the Tshwane University of Technology (TUT) in order to investigate the role of mathematics in student achievement and retention in National…

Interface For Dual-Channel MIL-STD-1553 Data Bus

NASA Technical Reports Server (NTRS)

Davies, Bryan L.; Heaps, Timothy L.

1992-01-01

Digital electronic subsystem made of commercially available programmable logic arrays and discrete logic devices serves as interface between microprocessor and dual-channel MIL-STD-1553 data bus. Subsystem consumes only 800 mW of power. Provides flexibility in that it is controllable via firmware. Includes only two reading-and-writing ports: one for status and control signals, other for transmission and reception of data.

Improved Planning and Programming for Energy Efficient New Army Facilities

DTIC Science & Technology

1988-10-01

setpoints to occupant comfort must be considered carefully. Cutting off the HVAC system to the bedrooms during the day produced only small savings...functions of a building and minimizing the energy usage through optimization . It includes thermostats, time switches, programmable con- trollers...microprocessor systems, computers, and sensing devices that are linked with control and power components to manage energy use. This system optimizes load

Resilience and Refusal: African-Caribbean Young Men's Agency, School Exclusions, and School-Based Mentoring Programmes

ERIC Educational Resources Information Center

Warren, Simon

2005-01-01

In this paper I attempt to do three things. Firstly, I explore the concept of resistance in the sociology of youth and education. I raise questions about the power of this concept to provide a descriptive language for understanding the way young people generally, and in this paper, young African-Caribbean men in London schools, deal with the…

Danger of Prolific Cybercrime and Network DDOS from Unprotected IoT Devices

Science.gov Websites

been around for more than 40 years. But people didn't know about it because most of the internet of things was industrial internet of things. So when you had programmable logical controls, remote terminal for People Power Company. And Scott Wu is also from NewSky. He's on as well. And we'll talk a few

Computation of Southern Pine Site Index Using a TI-59 Calculator

Treesearch

Robert M. Farrar

1983-01-01

A program is described that permits computation of site index in the field using a Texas Instruments model TI-59 programmable, hand-held, battery-powered calculator. Based on a series of equations developed by R.M. Farrar, Jr., for the site index curves in USDA Miscellaneous Publication 50, the program can accommodate any index base age, tree age, and height within...

Development of a wheelchair maintenance training programme and questionnaire for clinicians and wheelchair users.

PubMed

Toro, Maria Luisa; Bird, Emily; Oyster, Michelle; Worobey, Lynn; Lain, Michael; Bucior, Samuel; Cooper, Rory A; Pearlman, Jonathan

2017-11-01

Purpose of state: The aims of this study were to develop a Wheelchair Maintenance Training Programme (WMTP) as a tool for clinicians to teach wheelchair users (and caregivers when applicable) in a group setting to perform basic maintenance at home in the USA and to develop a Wheelchair Maintenance Training Questionnaire (WMT-Q) to evaluate wheelchair maintenance knowledge in clinicians, manual and power wheelchair users. The WMTP and WMT-Q were developed through an iterative process. A convenience sample of clinicians (n = 17), manual wheelchair (n ∞ 5), power wheelchair users (n = 4) and caregivers (n = 4) provided feedback on the training programme. A convenience sample of clinicians (n = 38), manual wheelchair (n = 25), and power wheelchair users (n = 30) answered the WMT-Q throughout different phases of development. The subscores of the WMT-Q achieved a reliability that ranged between ICC(3,1) = 0.48 to ICC(3,1) = 0.89. The WMTP and WMT-Q were implemented with 15 clinicians who received in-person training in the USA using the materials developed and showed a significant increase in all except one of the WMT-Q subscores after the WMTP (p < 0.007). The WMTP will continue to be revised as it is further implemented. The WMT-Q is an acceptable instrument to measure pre- and post-training maintenance knowledge. Implications for Rehabilitation The Wheelchair Maintenance Training Program can be used to educate rehabilitation clinicians and technicians to improve wheelchair service and delivery to end users. This training complements the World Health Organization basic wheelchair service curriculum, which only includes training of the clinicians, but does not include detailed information to train wheelchair users and caregivers. This training program offers a time efficient method for providing education to end users in a group setting that may mitigate adverse consequences resulting from wheelchair breakdown. This training program has significant potential for impact among wheelchair users in areas where access to repair services is limited.

Feasibility and cost-effectiveness of a multidisciplinary home-telehealth intervention programme to reduce falls among elderly discharged from hospital: study protocol for a randomized controlled trial.

PubMed

Giordano, Alessandro; Bonometti, Gian Pietro; Vanoglio, Fabio; Paneroni, Mara; Bernocchi, Palmira; Comini, Laura; Giordano, Amerigo

2016-12-07

Fall incidents are the third cause of chronic disablement in elderly according to the World Health Organization (WHO). Recent meta-analyses shows that a multifactorial falls risk assessment and management programmes are effective in all older population studied. However, the application of these programmes may not be the same in all National health care setting and, consequently, needs to be evaluated by cost-effectiveness studies before to plan this intervention in regular care. In Italy structured collaboration between hospital staff and primary care is generally lacking and the role of Information and Communication Technologies (ICT) in a fall prevention programme at home has never been explored. This will be a two-group randomised controlled trial aiming to evaluate the effects of a home-based intervention programme delivered by a multidisciplinary health team. The home tele-management programme, previously adopted in our Institute for chronic patients, will be proposed to elderly people affected by chronic diseases at high risk of falling at hospital discharge. The programme will involve the hospital staff and will be managed thanks to the collaboration between hospital and primary care setting. Patients will be followed for 6 months after hospital discharge. A nurse-tutor telephone support and tele-exercise will characterize the intervention programme. People in the control group will receive usual care. The main outcome measure of the study will be the percentage of patients sustaining a fall during the 6-months follow-up period. An economic evaluation will be performed from a societal perspective and will involve calculating cost-effectiveness and cost utility ratios. To date, no adequately powered studies have investigated the effect of the Information and Communication Technologies (ICT) in a home fall prevention program. We aim the program will be feasible in terms of intensity and characteristics, but particularly in terms of patient and provider compliance. The results of the economic evaluation could provide information about the cost-effectiveness of the intervention and the effects on quality of life. In case of shown effectiveness and cost effectiveness, the program could be implemented into health services settings. ClinicalTrials.gov ( NCT02487589 ).

Suitability of FIFA's "The 11" Training Programme for Young Football Players - Impact on Physical Performance.

PubMed

Kilding, Andrew E; Tunstall, Helen; Kuzmic, Dejan

2008-01-01

There is a paucity of evidence regarding the use of injury prevention programmes for preadolescents participating in sport. "The 11 "injury prevention programme was developed by FIFA's medical research centre (F-MARC) to help reduce the risk of injury in football players aged 14 years and over. The aim of this study was to determine the suitability and effectiveness of "The 11 "for younger football players. Twenty-four [12 experimental (EXP), 12 control (CON)] young football players (age 10.4 ± 1.4 yr) participated. The EXP group followed "The 11 "training programme 5 days per week, for 6 weeks, completing all but one of the 10 exercises. Prior to, and after the intervention, both EXP and CON groups performed a battery of football-specific physical tests. Changes in performance scores within each group were compared using independent t-tests (p ≤ 0.05). Feedback was also gathered on the young players' perceptions of "The 11". No injuries occurred during the study in either group. Compliance to the intervention was 72%. Measures of leg power (3 step jump and counter-movement jump) increased significantly (3.4 and 6.0% respectively, p < 0.05). Speed over 20 m improved by 2% (p < 0.05). Most players considered "The 11 "beneficial but not enjoyable in the prescribed format. Given the observed improvements in the physical abilities and the perceived benefits of "The 11", it would appear that a modified version of the programme is appropriate and should be included in the training of young football players, for both physical development and potential injury prevention purposes, as well as to promote fair play. To further engage young football players in such a programme, some modification to "The 11 "should be considered. Key pointsChildren who participate in recreational and competitive sports, especially football, are susceptible to injury.There is a need for the design and assessment of injury prevention programmes for children.The 11 "improves essential physical performance characteristics and has the potential to reduce the risk of injury.It may be prudent to implement a 'child-friendly' version of "The 11", to enhance long-term programme adherence and to ensure progressive physical development of players.

Suitability of FIFA’s “The 11” Training Programme for Young Football Players – Impact on Physical Performance

PubMed Central

Kilding, Andrew E; Tunstall, Helen; Kuzmic, Dejan

2008-01-01

There is a paucity of evidence regarding the use of injury prevention programmes for preadolescents participating in sport. “The 11 ”injury prevention programme was developed by FIFA’s medical research centre (F-MARC) to help reduce the risk of injury in football players aged 14 years and over. The aim of this study was to determine the suitability and effectiveness of “The 11 ”for younger football players. Twenty-four [12 experimental (EXP), 12 control (CON)] young football players (age 10.4 ± 1.4 yr) participated. The EXP group followed “The 11 ”training programme 5 days per week, for 6 weeks, completing all but one of the 10 exercises. Prior to, and after the intervention, both EXP and CON groups performed a battery of football-specific physical tests. Changes in performance scores within each group were compared using independent t-tests (p ≤ 0.05). Feedback was also gathered on the young players’ perceptions of “The 11”. No injuries occurred during the study in either group. Compliance to the intervention was 72%. Measures of leg power (3 step jump and counter-movement jump) increased significantly (3.4 and 6.0% respectively, p < 0.05). Speed over 20 m improved by 2% (p < 0.05). Most players considered “The 11 ”beneficial but not enjoyable in the prescribed format. Given the observed improvements in the physical abilities and the perceived benefits of “The 11”, it would appear that a modified version of the programme is appropriate and should be included in the training of young football players, for both physical development and potential injury prevention purposes, as well as to promote fair play. To further engage young football players in such a programme, some modification to “The 11 ”should be considered. Key pointsChildren who participate in recreational and competitive sports, especially football, are susceptible to injury.There is a need for the design and assessment of injury prevention programmes for children.The 11 ”improves essential physical performance characteristics and has the potential to reduce the risk of injury.It may be prudent to implement a ‘child-friendly’ version of “The 11”, to enhance long-term programme adherence and to ensure progressive physical development of players. PMID:24149898

Analysis and simulation tools for solar array power systems

NASA Astrophysics Data System (ADS)

Pongratananukul, Nattorn

This dissertation presents simulation tools developed specifically for the design of solar array power systems. Contributions are made in several aspects of the system design phases, including solar source modeling, system simulation, and controller verification. A tool to automate the study of solar array configurations using general purpose circuit simulators has been developed based on the modeling of individual solar cells. Hierarchical structure of solar cell elements, including semiconductor properties, allows simulation of electrical properties as well as the evaluation of the impact of environmental conditions. A second developed tool provides a co-simulation platform with the capability to verify the performance of an actual digital controller implemented in programmable hardware such as a DSP processor, while the entire solar array including the DC-DC power converter is modeled in software algorithms running on a computer. This "virtual plant" allows developing and debugging code for the digital controller, and also to improve the control algorithm. One important task in solar arrays is to track the maximum power point on the array in order to maximize the power that can be delivered. Digital controllers implemented with programmable processors are particularly attractive for this task because sophisticated tracking algorithms can be implemented and revised when needed to optimize their performance. The proposed co-simulation tools are thus very valuable in developing and optimizing the control algorithm, before the system is built. Examples that demonstrate the effectiveness of the proposed methodologies are presented. The proposed simulation tools are also valuable in the design of multi-channel arrays. In the specific system that we have designed and tested, the control algorithm is implemented on a single digital signal processor. In each of the channels the maximum power point is tracked individually. In the prototype we built, off-the-shelf commercial DC-DC converters were utilized. At the end, the overall performance of the entire system was evaluated using solar array simulators capable of simulating various I-V characteristics, and also by using an electronic load. Experimental results are presented.

Effect of different blood-guided conditioning programmes on skeletal muscle ultrastructure and histochemistry of sport horses.

PubMed

Lindner, A; Dag Erginsoy, S; Kissenbeck, S; Mosen, H; Hetzel, U; Drommer, W; Chamizo, V E; Rivero, J L L

2013-04-01

The effects of three different blood-guided conditioning programmes on ultrastructural and histochemical features of the gluteus medius muscle of 2-year-old sport horses were examined. Six non-trained Haflinger horses performed three consecutive conditioning programmes of varying lactate-guided intensities [velocities eliciting blood lactate concentrations of 1.5 (v1.5 ), 2.5 (v2.5 ) and 4 (v4 ) mm respectively] and durations (25 and 45 min). Each conditioning programme lasted 6 weeks and was followed by a 5-week resting period. Pre-, post- and deconditioning muscle biopsies were analysed. Although training and detraining adaptations were similar in nature, they varied significantly in magnitude among the three different conditioning programmes. Overall, the adaptations consisted in significant increases in size of mitochondria and myofibrils, as well as a hypertrophy of myofibrillar ATPase type IIA muscle fibres and a reduction in number of type IIx low-oxidative fibres. Together, these changes are compatible with a significant improvement in both muscle aerobic capacity and muscle strength. The use of v1.5 and v2.5 as the exercise intensities for 45 min elicited more significant adaptations in muscle, whereas conditioning horses at v4 for 25 min evoked minimal changes. Most of these muscular adaptations returned towards the pre-conditioning status after 5 weeks of inactivity. It is concluded that exercises of low or moderate intensities (in the range between v1.5 and v2.5 ) and long duration (45 min) are more effective for improving muscle features associated with stamina and power in sport horses than exercises of higher intensity (equivalent to v4 ) and shorter duration (25 min). © 2012 Blackwell Verlag GmbH.

Knowledge level of nurses in Jordan on ventilator-associated pneumonia and preventive measures.

PubMed

Hassan, Zeinab M; Wahsheh, Moayad A

2017-05-01

Ventilator-associated pneumonia is the most prevalent infection in Intensive Care Units, with the highest mortality rate; crude mortality rates may be as high as 20-75%. Many practices such as prevention measures (e.g. hand washing, wearing gloves, suctioning, elevated head of bed between 30° and 45°) have demonstrated an effect of reducing the incidence of this infection. To identify the level of nurses' knowledge of ventilator-associated pneumonia and prevention measures before an educational programme, identify the level of nurses' knowledge on ventilator-associated pneumonia and prevention post an educational programme and identify the reasons for not applying ventilator-associated pneumonia prevention measures among nurses in Jordan. Pre- and post-intervention observational study. Data based on a self-reported questionnaire from 428 nurses who worked in intensive care units were analysed. PowerPoint lectures, videos, printed materials and electronic materials were used in the intervention. Paired t-tests were used to test research questions. More than three-quarters of nurses had a low knowledge level regarding pathophysiology, risk factors and ventilator-associated pneumonia preventative measures. Nurses showed significant improvements in mean scores on the knowledge level of ventilator-associated pneumonia and prevention measures after an educational programme (p < 0.05). The main reasons for not applying prevention measures were the lack of time and no followed protocols in the units. Health education programmes about ventilator-associated pneumonia must be conducted among nurses in Jordan through continuous education. Hospital and nursing administrators should be actively involved in educational programmes and in assuring support for continuing education. Protocol for ventilator-associated pneumonia prevention should be developed based on current evidence-based guidelines. © 2016 British Association of Critical Care Nurses.

Is strength-training frequency a key factor to develop performance adaptations in young elite soccer players?

PubMed

Otero-Esquina, Carlos; de Hoyo Lora, Moisés; Gonzalo-Skok, Óliver; Domínguez-Cobo, Sergio; Sánchez, Hugo

2017-11-01

The aim of this study was to analyse the effects of a combined strength-training programme (full-back squat, YoYo TM leg curl, plyometrics and sled towing exercises) on performance in elite young soccer players and to examine the effects when this training programme was performed one or two days per week. Thirty-six male soccer players (U-17 to U-19) were recruited and assigned to experimental groups (EXP1: 1 s w -1 ; EXP2: 2 s w -1 ) or a control group (CON). Performance was assessed through a countermovement jump (CMJ) test (relative peak power [CMJ PP ] and CMJ height [CMJ H ]), a 20-m linear sprint test with split-times at 10-m, and a change of direction test (V-cut test) 1 week before starting the training programme and also 1 week after performing such training programme. Within-group analysis showed substantial improvements in CMJ variables (ES: 0.39-0.81) and COD (ES: 0.70 and 0.76) in EXP1 and EXP2, while EXP2 also showed substantial enhancements in all linear sprinting tests (ES: 0.43-0.52). Between-group analysis showed substantially greater improvements in CMJ variables (ES: 0.39-0.68) in experimental groups in comparison to CON. Furthermore, EXP2 achieved a substantial better performance in 20-m (ES: 0.48-0.64) than EXP1 and CON. Finally, EXP2 also showed greater enhancements in 10-m (ES: 0.50) and V-cut test (ES: 0.52) than EXP1. In conclusion, the combined strength-training programme improved jumping ability, independently of training frequency, though the achievement of two sessions per week also enhanced sprinting abilities (linear and COD) in young soccer players.

Clock jitter generator with picoseconds resolution

NASA Astrophysics Data System (ADS)

Jovanović, Goran; Stojčev, Mile; Nikolić, Tatjana

2013-06-01

The clock is one of the most critical signals in any synchronous system. As CMOS technology has scaled, supply voltages have dropped chip power consumption has increased and the effects of jitter due to clock frequency increase have become critical and jitter budget has become tighter. This article describes design and development of low-cost mixed-signal programmable jitter generator with high resolution. The digital technique is used for coarse-grain and an analogue technique for fine-grain clock phase shifting. Its structure allows injection of various random and deterministic jitter components in a controllable and programmable fashion. Each jitter component can be switched on or off. The jitter generator can be used in jitter tolerance test and jitter transfer function measurement of high-speed synchronous digital circuits. At operating system clock frequency of 220 MHz, a jitter with 4 ps resolution can be injected.

A novel FPGA-programmable switch matrix interconnection element in quantum-dot cellular automata

NASA Astrophysics Data System (ADS)

Hashemi, Sara; Rahimi Azghadi, Mostafa; Zakerolhosseini, Ali; Navi, Keivan

2015-04-01

The Quantum-dot cellular automata (QCA) is a novel nanotechnology, promising extra low-power, extremely dense and very high-speed structure for the construction of logical circuits at a nanoscale. In this paper, initially previous works on QCA-based FPGA's routing elements are investigated, and then an efficient, symmetric and reliable QCA programmable switch matrix (PSM) interconnection element is introduced. This element has a simple structure and offers a complete routing capability. It is implemented using a bottom-up design approach that starts from a dense and high-speed 2:1 multiplexer and utilise it to build the target PSM interconnection element. In this study, simulations of the proposed circuits are carried out using QCAdesigner, a layout and simulation tool for QCA circuits. The results demonstrate high efficiency of the proposed designs in QCA-based FPGA routing.

Upregulating endogenous genes by an RNA-programmable artificial transactivator

PubMed Central

Fimiani, Cristina; Goina, Elisa; Mallamaci, Antonello

2015-01-01

To promote expression of endogenous genes ad libitum, we developed a novel, programmable transcription factor prototype. Kept together via an MS2 coat protein/RNA interface, it includes a fixed, polypeptidic transactivating domain and a variable RNA domain that recognizes the desired gene. Thanks to this device, we specifically upregulated five genes, in cell lines and primary cultures of murine pallial precursors. Gene upregulation was small, however sufficient to robustly inhibit neuronal differentiation. The transactivator interacted with target gene chromatin via its RNA cofactor. Its activity was restricted to cells in which the target gene is normally transcribed. Our device might be useful for specific applications. However for this purpose, it will require an improvement of its transactivation power as well as a better characterization of its target specificity and mechanism of action. PMID:26152305

Embedded System Implementation on FPGA System With μCLinux OS

NASA Astrophysics Data System (ADS)

Fairuz Muhd Amin, Ahmad; Aris, Ishak; Syamsul Azmir Raja Abdullah, Raja; Kalos Zakiah Sahbudin, Ratna

2011-02-01

Embedded systems are taking on more complicated tasks as the processors involved become more powerful. The embedded systems have been widely used in many areas such as in industries, automotives, medical imaging, communications, speech recognition and computer vision. The complexity requirements in hardware and software nowadays need a flexibility system for further enhancement in any design without adding new hardware. Therefore, any changes in the design system will affect the processor that need to be changed. To overcome this problem, a System On Programmable Chip (SOPC) has been designed and developed using Field Programmable Gate Array (FPGA). A softcore processor, NIOS II 32-bit RISC, which is the microprocessor core was utilized in FPGA system together with the embedded operating system(OS), μClinux. In this paper, an example of web server is explained and demonstrated

Programmable logic devices

NASA Astrophysics Data System (ADS)

Jacobs, J. L.

1993-04-01

Erasable programmable logic devices (EPLD's) were investigated to determine their advantages and/or disadvantages in Test Equipment Engineering applications. It was found that EPLD's performed as well as or better than identical circuits using standard transistor transistor logic (TTL). The chip count in these circuits was reduced, saving printed circuit board space and shortening fabrication and prove-in time. Troubleshooting circuits of EPLD's was also easier with 10 to 100 times fewer wires needed. The reduced number of integrated circuits (IC's) contributed to faster system speeds and an overall lower power consumption. In some cases changes to the circuit became software changes using EPLD's instead of hardware changes for standard logic. Using EPLD's was fairly easy; however, as with any new technology, a learning curve must be overcome before EPLD's can be used efficiently. The many benefits of EPLD's outweighed this initial inconvenience.

Silicon photonic integrated circuits with electrically programmable non-volatile memory functions.

PubMed

Song, J-F; Lim, A E-J; Luo, X-S; Fang, Q; Li, C; Jia, L X; Tu, X-G; Huang, Y; Zhou, H-F; Liow, T-Y; Lo, G-Q

2016-09-19

Conventional silicon photonic integrated circuits do not normally possess memory functions, which require on-chip power in order to maintain circuit states in tuned or field-configured switching routes. In this context, we present an electrically programmable add/drop microring resonator with a wavelength shift of 426 pm between the ON/OFF states. Electrical pulses are used to control the choice of the state. Our experimental results show a wavelength shift of 2.8 pm/ms and a light intensity variation of ~0.12 dB/ms for a fixed wavelength in the OFF state. Theoretically, our device can accommodate up to 65 states of multi-level memory functions. Such memory functions can be integrated into wavelength division mutiplexing (WDM) filters and applied to optical routers and computing architectures fulfilling large data downloading demands.

Services supporting collaborative alignment of engineering networks

NASA Astrophysics Data System (ADS)

Jansson, Kim; Uoti, Mikko; Karvonen, Iris

2015-08-01

Large-scale facilities such as power plants, process factories, ships and communication infrastructures are often engineered and delivered through geographically distributed operations. The competencies required are usually distributed across several contributing organisations. In these complicated projects, it is of key importance that all partners work coherently towards a common goal. VTT and a number of industrial organisations in the marine sector have participated in a national collaborative research programme addressing these needs. The main output of this programme was development of the Innovation and Engineering Maturity Model for Marine-Industry Networks. The recently completed European Union Framework Programme 7 project COIN developed innovative solutions and software services for enterprise collaboration and enterprise interoperability. One area of focus in that work was services for collaborative project management. This article first addresses a number of central underlying research themes and previous research results that have influenced the development work mentioned above. This article presents two approaches for the development of services that support distributed engineering work. Experience from use of the services is analysed, and potential for development is identified. This article concludes with a proposal for consolidation of the two above-mentioned methodologies. This article outlines the characteristics and requirements of future services supporting collaborative alignment of engineering networks.

Games, civil war and mutiny: metaphors of conflict for the nurse-doctor relationship in medical television programmes.

PubMed

Weaver, Roslyn

2013-12-01

Metaphors of medicine are common, such as war, which is evident in much of our language about health-care where patients and healthcare professionals fight disease, or the game, which is one way to frame the nurse-doctor professional relationship. This study analyses six pilot episodes of American (Grey's Anatomy, Hawthorne, Mercy, Nurse Jackie) and Australian (All Saints, RAN) medical television programmes premiering between 1998 and 2009 to assess one way that our contemporary culture understands and constructs professional relationships between nurses and doctors. Analysis shows that these popular television programmes frequently depict conflict, with games, civil war and mutiny between nurses and doctors over patient safety rather than professionals working collaboratively in teams to deliver health-care. Although the benefit of this televised conflict is the implication that nurses are knowledgeable, skilled professionals, the negative connotations include a dysfunctional and dangerous healthcare system, and also ongoing power struggles. Given that popular culture can sometimes influence the public's understanding of real-life nursing practice, it is important to explore what these metaphors of conflict are communicating about the nurse-doctor relationship. © 2013 John Wiley & Sons Ltd.

[Remain true to our original aspiration for farewell to the God of Plague, compose the new chapter for the national schistosomiasis control programme scientifically-Commemoration of 60th anniversary of publishing Chairman Mao Zedong's two poems "Farewell to the God of Plague"].

PubMed

Xiao-Nong, Zhou; Shi-Zhu, Li; Qing-Biao, Hong; Kun, Yang; Shan, Lü; Jing, Xu

2018-02-26

This paper reviews the huge promotion of Chairman Mao Zedong's two poems entitled "Farewell to the God of Plague" which were published 60 years ago, and the great achievements of the national schistosomiasis control programme in China. The publication of the two poems promotes the establishment of the mechanism for the national schistosomiasis control programme in China, and in addition, the schistosomiasis control spirit of the people from Yujiang County is still the source of power for the promotion of transferring the schistosomiasis control to elimination stage in China. Now, that we commemorate the 60th anniversary of publishing Chairman Mao Zedong's two poems entitled "Farewell to the God of Plague" means we remain the true to our original aspiration to serve the people forever, which is also to promote the progress of schistosomiasis elimination in China according to the law, the scientific principle, and local conditions, so as to contribute our efforts for realizing the healthy China's dream.

Creating a culture to support patient safety. The contribution of a multidisciplinary team development programme to collaborative working.

PubMed

Benson, Anne

2010-01-01

Effective teamwork is crucial for ensuring the provision of safe high quality care. Teams whose members collaborate through questioning, reflecting on and reviewing their work, offering each other feedback and where reporting is encouraged are more likely to promote a safe environment of care. This paper describes a multidisciplinary development programme intended to increase team effectiveness. The teams that took part developed their ability to work collaboratively together with levels of open dialogue, critical reflection and direct feedback increasing. The paper goes on to discuss aspects of the programme which were helpful in enabling these positive changes and concludes with a number of recommendations for those commissioning and facilitating team development initiatives. These include: the need for people from different disciplines and different levels within the hierarchy to spend time reviewing their work together, the need to explicitly address issues of power and authority, the usefulness taking an action orientated approach and requiring participants to work on real issues together, the importance of providing sufficient time and resource to support people to work with the challenges associated with implementing change and addressing team dynamics, The importance of skilled facilitation.

American Smart Power for Africa’s Kids

DTIC Science & Technology

2011-05-13

with orphans, refugees, and other displaced children at particular risk.40 In 1992, the International Labour Organization ( ILO ), a UN agency...March 28, 2011). 39 Ibid. 40 Ibid. 41 International Labour Organization, ―International Programme on the Elimination of Child Labour ,‖ http...Barracks, PA 17013-5050 USAWC CLASS OF 2011 The U.S. Army War College is accredited by the Commission on Higher Education of the Middle State

Knowledge Distribution and Power Relations in HIV-Related Education and Prevention for Gay Men: An Application of Bernstein to Australian Community-Based Pedagogical Devices

ERIC Educational Resources Information Center

McInnes, David; Murphy, Dean

2011-01-01

This paper seeks to make a theoretical and analytic intervention into the field of HIV-related education and prevention by applying the pedagogy framework of Basil Bernstein to a series of pedagogical devices developed and used in community-based programmes targeting gay men in Australia. The paper begins by outlining why it is such an…

"Now We Are Real Women": Playing with Gender in a Male Prison Theatre Programme in South Africa

ERIC Educational Resources Information Center

Sutherland, Alexandra

2013-01-01

The use of sexual violence as a means of power and control within the South African prison system has been well documented. Sexual violence is intimately linked to the gendering of roles, such that rape and coercive sex is used as a brutal means of imposing a feminised identity; a violent enactment of who penetrates and who gets penetrated. Within…

Fabrication of miniature elastomer lenses with programmable liquid mold for smartphone microscopy: curing polydimethylsiloxane with in situ curvature control

NASA Astrophysics Data System (ADS)

Karunakaran, Bhuvaneshwari; Tharion, Joseph; Dhawangale, Arvind Ramrao; Paul, Debjani; Mukherji, Soumyo

2018-02-01

Miniature lenses can transform commercial imaging systems, e.g., smartphones and webcams, into powerful, low-cost, handheld microscopes. To date, the reproducible fabrication of polymer lenses is still a challenge as they require controlled dispensing of viscous liquid. This paper reports a reproducible lens fabrication technique using liquid mold with programmable curvature and off-the-shelf materials. The lens curvature is controlled during fabrication by tuning the curvature of an interface of two immiscible liquids [polydimethylsiloxane (PDMS) and glycerol]. The curvature control is implemented using a visual feedback system, which includes a software-based guiding system to produce lenses of desired curvature. The technique allows PDMS lens fabrication of a wide range of sizes and focal lengths, within 20 min. The fabrication of two lens diameters: 1 and 5 mm with focal lengths ranging between 1.2 and 11 mm are demonstrated. The lens surface and bulk quality check performed using X-ray microtomography and atomic force microscopy reveal that the lenses are suitable for optical imaging. Furthermore, a smartphone microscope with ˜1.4-μm resolution is developed using a self-assembly of a single high power fabricated lens and microaperture. The lenses have various potential applications, e.g., optofluidics, diagnostics, forensics, and surveillance.

Spanish nursing under Franco: reinvention, modernization and repression (1956-1976).

PubMed

Miró, Margalida; Gastaldo, Denise; Nelson, Sioban; Gallego, Gloria

2012-09-01

This article examines Spanish nursing during a critical 20-year period (1956-76) when, under the dictatorial government of General Franco, nursing became the target of a modernization strategy. In the national standardized system of state-run schools, the previously distinct nursing and midwifery programmes were merged into a new training programme which created the single professional denomination of ATS-Ayudante Técnico Sanitario (Technical Sanitary Assistant). Under the leadership of medicine, and with the blessing of the Catholic Church and the Sección Femenina (Women's Section of the Falangist Party), nursing was positioned as feminized and subordinate to medicine, a predominantly male profession in mid-twentieth century Spain. This article discusses this crucial phase of Spanish nursing history by focusing on one influential historical document (published in 1956), Professional Moral Orientation for the Sanitary Technical Assistants, a nursing textbook on professional morals for first-year nursing students written by Rosamaria Miranda, a Catholic nun and a trained nurse. Our analysis reveals that gender-related and technical discourses concerning disciplinary and pastoral power relations presented in this textbook legitimate the core beliefs of Franquism put forward by the politically powerful women's branch of the ruling Falangist Party in mid-twentieth century Spain. © 2011 Blackwell Publishing Ltd.

Multipurpose active pixel sensor (APS)-based microtracker

NASA Astrophysics Data System (ADS)

Eisenman, Allan R.; Liebe, Carl C.; Zhu, David Q.

1998-12-01

A new, photon-sensitive, imaging array, the active pixel sensor (APS) has emerged as a competitor to the CCD imager for use in star and target trackers. The Jet Propulsion Laboratory (JPL) has undertaken a program to develop a new generation, highly integrated, APS-based, multipurpose tracker: the Programmable Intelligent Microtracker (PIM). The supporting hardware used in the PIM has been carefully selected to enhance the inherent advantages of the APS. Adequate computation power is included to perform star identification, star tracking, attitude determination, space docking, feature tracking, descent imaging for landing control, and target tracking capabilities. Its first version uses a JPL developed 256 X 256-pixel APS and an advanced 32-bit RISC microcontroller. By taking advantage of the unique features of the APS/microcontroller combination, the microtracker will achieve about an order-of-magnitude reduction in mass and power consumption compared to present state-of-the-art star trackers. It will also add the advantage of programmability to enable it to perform a variety of star, other celestial body, and target tracking tasks. The PIM is already proving the usefulness of its design concept for space applications. It is demonstrating the effectiveness of taking such an integrated approach in building a new generation of high performance, general purpose, tracking instruments to be applied to a large variety of future space missions.

ELIPS: Toward a Sensor Fusion Processor on a Chip

NASA Technical Reports Server (NTRS)

Daud, Taher; Stoica, Adrian; Tyson, Thomas; Li, Wei-te; Fabunmi, James

1998-01-01

The paper presents the concept and initial tests from the hardware implementation of a low-power, high-speed reconfigurable sensor fusion processor. The Extended Logic Intelligent Processing System (ELIPS) processor is developed to seamlessly combine rule-based systems, fuzzy logic, and neural networks to achieve parallel fusion of sensor in compact low power VLSI. The first demonstration of the ELIPS concept targets interceptor functionality; other applications, mainly in robotics and autonomous systems are considered for the future. The main assumption behind ELIPS is that fuzzy, rule-based and neural forms of computation can serve as the main primitives of an "intelligent" processor. Thus, in the same way classic processors are designed to optimize the hardware implementation of a set of fundamental operations, ELIPS is developed as an efficient implementation of computational intelligence primitives, and relies on a set of fuzzy set, fuzzy inference and neural modules, built in programmable analog hardware. The hardware programmability allows the processor to reconfigure into different machines, taking the most efficient hardware implementation during each phase of information processing. Following software demonstrations on several interceptor data, three important ELIPS building blocks (a fuzzy set preprocessor, a rule-based fuzzy system and a neural network) have been fabricated in analog VLSI hardware and demonstrated microsecond-processing times.

HALO: a reconfigurable image enhancement and multisensor fusion system

NASA Astrophysics Data System (ADS)

Wu, F.; Hickman, D. L.; Parker, Steve J.

2014-06-01

Contemporary high definition (HD) cameras and affordable infrared (IR) imagers are set to dramatically improve the effectiveness of security, surveillance and military vision systems. However, the quality of imagery is often compromised by camera shake, or poor scene visibility due to inadequate illumination or bad atmospheric conditions. A versatile vision processing system called HALO™ is presented that can address these issues, by providing flexible image processing functionality on a low size, weight and power (SWaP) platform. Example processing functions include video distortion correction, stabilisation, multi-sensor fusion and image contrast enhancement (ICE). The system is based around an all-programmable system-on-a-chip (SoC), which combines the computational power of a field-programmable gate array (FPGA) with the flexibility of a CPU. The FPGA accelerates computationally intensive real-time processes, whereas the CPU provides management and decision making functions that can automatically reconfigure the platform based on user input and scene content. These capabilities enable a HALO™ equipped reconnaissance or surveillance system to operate in poor visibility, providing potentially critical operational advantages in visually complex and challenging usage scenarios. The choice of an FPGA based SoC is discussed, and the HALO™ architecture and its implementation are described. The capabilities of image distortion correction, stabilisation, fusion and ICE are illustrated using laboratory and trials data.

Programmable Ultra Lightweight System Adaptable Radio (PULSAR) Low Cost Telemetry - Access from Space Advanced Technologies or Down the Middle

NASA Technical Reports Server (NTRS)

Sims. Herb; Varnavas, Kosta; Eberly, Eric

2013-01-01

Software Defined Radio (SDR) technology has been proven in the commercial sector since the early 1990's. Today's rapid advancement in mobile telephone reliability and power management capabilities exemplifies the effectiveness of the SDR technology for the modern communications market. In contrast, presently qualified satellite transponder applications were developed during the early 1960's space program. Programmable Ultra Lightweight System Adaptable Radio (PULSAR, NASA-MSFC SDR) technology revolutionizes satellite transponder technology by increasing data through-put capability by, at least, an order of magnitude. PULSAR leverages existing Marshall Space Flight Center SDR designs and commercially enhanced capabilities to provide a path to a radiation tolerant SDR transponder. These innovations will (1) reduce the cost of NASA Low Earth Orbit (LEO) and Deep Space transponders, (2) decrease power requirements, and (3) a commensurate volume reduction. Also, PULSAR increases flexibility to implement multiple transponder types by utilizing the same hardware with altered logic - no analog hardware change is required - all of which can be accomplished in orbit. This provides high capability, low cost, transponders to programs of all sizes. The final project outcome would be the introduction of a Technology Readiness Level (TRL) 7 low-cost CubeSat to SmallSat telemetry system into the NASA Portfolio.

Photonic generation of FCC-compliant UWB pulses based on modified Gaussian quadruplet and incoherent wavelength-to-time conversion

NASA Astrophysics Data System (ADS)

Mu, Hongqian; Wang, Muguang; Tang, Yu; Zhang, Jing; Jian, Shuisheng

2018-03-01

A novel scheme for the generation of FCC-compliant UWB pulse is proposed based on modified Gaussian quadruplet and incoherent wavelength-to-time conversion. The modified Gaussian quadruplet is synthesized based on linear sum of a broad Gaussian pulse and two narrow Gaussian pulses with the same pulse-width and amplitude peak. Within specific parameter range, FCC-compliant UWB with spectral power efficiency of higher than 39.9% can be achieved. In order to realize the designed waveform, a UWB generator based on spectral shaping and incoherent wavelength-to-time mapping is proposed. The spectral shaper is composed of a Gaussian filter and a programmable filter. Single-mode fiber functions as both dispersion device and transmission medium. Balanced photodetection is employed to combine linearly the broad Gaussian pulse and two narrow Gaussian pulses, and at same time to suppress pulse pedestals that result in low-frequency components. The proposed UWB generator can be reconfigured for UWB doublet by operating the programmable filter as a single-band Gaussian filter. The feasibility of proposed UWB generator is demonstrated experimentally. Measured UWB pulses match well with simulation results. FCC-compliant quadruplet with 10-dB bandwidth of 6.88-GHz, fractional bandwidth of 106.8% and power efficiency of 51% is achieved.

Back-end of the fuel cycle - Indian scenario

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wattal, P.K.

Nuclear power has a key role in meeting the energy demands of India. This can be sustained by ensuring robust technology for the back end of the fuel cycle. Considering the modest indigenous resources of U and a huge Th reserve, India has adopted a three stage Nuclear Power Programme (NPP) based on 'closed fuel cycle' approach. This option on 'Recovery and Recycle' serves twin objectives of ensuring adequate supply of nuclear fuel and also reducing the long term radio-toxicity of the wastes. Reprocessing of the spent fuel by Purex process is currently employed. High Level Liquid Waste (HLW) generatedmore » during reprocessing is vitrified and undergoes interim storage. Back-end technologies are constantly modified to address waste volume minimization and radio-toxicity reduction. Long-term management of HLW in Indian context would involve partitioning of long lived minor actinides and recovery of valuable fission products specifically cesium. Recovery of minor actinides from HLW and its recycle is highly desirable for the sustained growth of India's NPPs. In this context, programme for developing and deploying partitioning technologies on industrial scale is pursued. The partitioned elements could be either transmuted in Fast Reactors (FRs)/Accelerated Driven Systems (ADS) as an integral part of sustainable Indian NPP. (authors)« less

Programmable in vivo selection of arbitrary DNA sequences.

PubMed

Ben Yehezkel, Tuval; Biezuner, Tamir; Linshiz, Gregory; Mazor, Yair; Shapiro, Ehud

2012-01-01

The extraordinary fidelity, sensory and regulatory capacity of natural intracellular machinery is generally confined to their endogenous environment. Nevertheless, synthetic bio-molecular components have been engineered to interface with the cellular transcription, splicing and translation machinery in vivo by embedding functional features such as promoters, introns and ribosome binding sites, respectively, into their design. Tapping and directing the power of intracellular molecular processing towards synthetic bio-molecular inputs is potentially a powerful approach, albeit limited by our ability to streamline the interface of synthetic components with the intracellular machinery in vivo. Here we show how a library of synthetic DNA devices, each bearing an input DNA sequence and a logical selection module, can be designed to direct its own probing and processing by interfacing with the bacterial DNA mismatch repair (MMR) system in vivo and selecting for the most abundant variant, regardless of its function. The device provides proof of concept for programmable, function-independent DNA selection in vivo and provides a unique example of a logical-functional interface of an engineered synthetic component with a complex endogenous cellular system. Further research into the design, construction and operation of synthetic devices in vivo may lead to other functional devices that interface with other complex cellular processes for both research and applied purposes.

Internet-based intervention programme for obese adolescents and their families (Next.Step): research protocol of a controlled trial.

PubMed

Sousa, Pedro; Fonseca, Helena; Gaspar, Pedro; Gaspar, Filomena

2014-04-01

This paper describes the design and rationale of a controlled trial that aims to determine the effectiveness of an intervention programme in which the internet is used. Adolescent obesity is a major health problem, there being urgency to find effective interventions that induce behavioural change. The inclusion of the internet in the intervention may improve adolescents' adherence to the weight management programme and lead to adoption of healthier lifestyles. A clinical trial with a control group (non-randomized). Participants are adolescents with appointments at a paediatric obesity clinic (Portugal). Sample size was calculated according to the power analysis. The experimental group will follow the standard treatment protocol and receive free access to the e-therapeutic platform. The control group will follow the standard treatment protocol and join a waiting list. Intervention length will be 36 weeks (24 weeks of direct intervention with a follow-up for 12 weeks). This study was approved by the Ethical Committee for Health (Lisbon, Portugal) in January 2012 and funded by the Foundation for Science and Technology (Portugal) in December 2012. The results of this research will promote reflection on new approaches directed to treat adolescent obesity and on the promotion of healthy behaviours. We expect to gather empirical evidence of the intervention programme effectiveness. The expectations lie on the population health gains, empowerment in decision-making and adoption of healthier lifestyles. © 2013 John Wiley & Sons Ltd.

Promotion of breast feeding in the community: impact of health education programme in rural communities in Nigeria.

PubMed

Davies-Adetugbo, A A

1996-03-01

Breast feeding has been recognized as a child survival strategy, while breast feeding programmes have been increasingly implemented in many communities. This study assesses the effectiveness of a breast feeding education programme launched through the primary health care programme in the rural communities of Nigeria. Late trimester pregnant women were enrolled into the study and given a questionnaire on knowledge, attitudes, and practices (KAP) about breast feeding. Women in the study group (n = 126) received breast feeding counselling before and after delivery, while those in control group (n = 130) did not receive any counselling. Both groups were monitored after delivery and followed with the KAP questionnaire. The results of the study showed marked improvements in the intervention group for colostrum feeding (p = 0.0000). Moreover, 31.6% of the mothers in the intervention group practised timely initiation of breast feeding compared to 5.6% of the controls, and the prevalence of exclusive breast feeding at 4 months was 39.8% in the intervention group compared to 13.9% for the controls. Multivariate analysis showed that the intervention was a powerful and the only significant predictor of the increase in breast feeding behaviours (p = 0.0000), and that an early initiation of breast feeding is a strong predictor of exclusive breast feeding at 4 months of age. It is concluded that breast feeding promotion in rural communities is feasible and can lead to behavioural changes.

Design of a Ferroelectric Programmable Logic Gate Array

NASA Technical Reports Server (NTRS)

MacLeod, Todd C.; Ho, Fat Duen

2003-01-01

A programmable logic gate array has been designed utilizing ferroelectric field effect transistors. The design has only a small number of gates, but this could be scaled up to a more useful size. Using FFET's in a logic array gives several advantages. First, it allows real-time programmability to the array to give high speed reconfiguration. It also allows the array to be configured nearly an unlimited number of times, unlike a FLASH FPGA. Finally, the Ferroelectric Programmable Logic Gate Array (FPLGA) can be implemented using a smaller number of transistors because of the inherent logic characteristics of an FFET. The device was only designed and modeled using Spice models of the circuit, including the FFET. The actual device was not produced. The design consists of a small array of NAND and NOR logic gates. Other gates could easily be produced. They are linked by FFET's that control the logic flow. Timing and logic tables have been produced showing the array can produce a variety of logic combinations at a real time usable speed. This device could be a prototype for a device that could be put into imbedded systems that need the high speed of hardware implementation of logic and the complexity to need to change the logic algorithm. Because of the non-volatile nature of the FFET, it would also be useful in situations that needed to program a logic array once and use it repeatedly after the power has been shut off.

Status of cold chain in routine immunisation centres of the Expanded Programme on Immunisation in Quetta, Pakistan.

PubMed

Buledi, Rahim; Butt, Zahid Ahmad; Ahmed, Jamil; Alizai, Aamir Akram

2017-05-01

To determine the status of cold chain and knowledge and practices of health workers about cold chain maintenance in routine immunisation health centres. This cross-sectional study was conducted in Quetta, Pakistan, from May to July 2012, and comprised health facilities in the district. We interviewed the staff responsible for vaccine storage and cold chain maintenance and used a checklist to assess cold chain maintenance of routine expanded programme on immunisation vaccines. SPSS 16 was used for data analysis.. Of the 42 health facilities, staff of 13(30%) wrongly indicated that measles and Bacillus Calmette-Guérin were cold sensitive vaccines. Temperature of the ice-lined refrigerators was not maintained twice daily in 18(43%) centres. There were no voltage stabilisers and standby power generators in 31(74%) and 38(90%) centres, respectively. Vaccine arrangement was found to be inappropriate in ice-lined refrigerators of 38(90%) centres and ice packs were incorrectly used in carriers in 22(52%) centres. Vaccine stock was not charted in 39(93%) centres. Moreover, 4(10%) facilities did not have dedicated expanded programme on immunisation rooms whereas about 5(12%) and 33(79%) had no vaccinator and separate expanded programme on immunisation incharge appointed. Also, 32(76%) centres did not have a female vaccinator appointed. Although the majority of health staff had adequate knowledge, there were weaknesses in practice of maintaining the cold chain.

Programmable, very low noise current source.

PubMed

Scandurra, G; Cannatà, G; Giusi, G; Ciofi, C

2014-12-01

We propose a new approach for the realization of very low noise programmable current sources mainly intended for application in the field of low frequency noise measurements. The design is based on a low noise Junction Field Effect Transistor (JFET) acting as a high impedance current source and programmability is obtained by resorting to a low noise, programmable floating voltage source that allows to set the sourced current at the desired value. The floating voltage source is obtained by exploiting the properties of a standard photovoltaic MOSFET driver. Proper filtering and a control network employing super-capacitors allow to reduce the low frequency output noise to that due to the low noise JFET down to frequencies as low as 100 mHz while allowing, at the same time, to set the desired current by means of a standard DA converter with an accuracy better than 1%. A prototype of the system capable of supplying currents from a few hundreds of μA up to a few mA demonstrates the effectiveness of the approach we propose. When delivering a DC current of about 2 mA, the power spectral density of the current fluctuations at the output is found to be less than 25 pA/√Hz at 100 mHz and less than 6 pA/√Hz for f > 1 Hz, resulting in an RMS noise in the bandwidth from 0.1 to 10 Hz of less than 14 pA.

Programmable, very low noise current source

NASA Astrophysics Data System (ADS)

Scandurra, G.; Cannatà, G.; Giusi, G.; Ciofi, C.

2014-12-01

We propose a new approach for the realization of very low noise programmable current sources mainly intended for application in the field of low frequency noise measurements. The design is based on a low noise Junction Field Effect Transistor (JFET) acting as a high impedance current source and programmability is obtained by resorting to a low noise, programmable floating voltage source that allows to set the sourced current at the desired value. The floating voltage source is obtained by exploiting the properties of a standard photovoltaic MOSFET driver. Proper filtering and a control network employing super-capacitors allow to reduce the low frequency output noise to that due to the low noise JFET down to frequencies as low as 100 mHz while allowing, at the same time, to set the desired current by means of a standard DA converter with an accuracy better than 1%. A prototype of the system capable of supplying currents from a few hundreds of μA up to a few mA demonstrates the effectiveness of the approach we propose. When delivering a DC current of about 2 mA, the power spectral density of the current fluctuations at the output is found to be less than 25 pA/√Hz at 100 mHz and less than 6 pA/√Hz for f > 1 Hz, resulting in an RMS noise in the bandwidth from 0.1 to 10 Hz of less than 14 pA.

"Girls need to behave like girls you know": the complexities of applying a gender justice goal within sexuality education in South African schools.

PubMed

Ngabaza, Sisa; Shefer, Tamara; Macleod, Catriona Ida

2016-11-01

Sexuality education, as a component within the Life Orientation (LO) programme in South African schools, is intended to provide young people with knowledge and skills to make informed choices about their sexuality, their own health and that of others. Key to the programme are outcomes relating to power, power relations and gender. In this paper, we apply a critical gender lens to explore the ways in which the teaching of sexuality education engages with larger goals of gender justice. The paper draws from a number of ethnographic studies conducted at 12 South African schools. We focus here on the data collected from focus group discussions with learners, and semi-structured interviews with individual learners, principals and Life Orientation (LO) teachers. The paper highlights the complexities of having gender justice as a central goal of LO sexuality education. Teaching sexuality education is reported to contradict dominant community values and norms. Although some principals and school authorities support gender equity and problematize hegemonic masculinities, learners experience sexuality education as upholding normative gender roles and male power, rather than challenging it. Teachers rely heavily on cautionary messages that put more responsibility for reproductive health on female learners, and use didactic, authoritative pedagogical techniques, which do not acknowledge young people's experience nor facilitate their sexual agency. These complexities need to be foregrounded and worked with systematically if the goal of gender justice within LO is to be realised. Copyright © 2016 Elsevier Inc. All rights reserved.

[Effects of Reactive Jump Training in Handball Players Regarding Jump Height and Power Development in the Triceps Surae Muscle].

PubMed

Rensing, N; Westermann, A; Möller, D; von Piekartz, H

2015-12-01

Studies have shown changes in the technical and physical demands in modern handball. The game has increased considerably in speed, power and dynamics. Jump training has, therefore, become ever more important in the training of the athletes. These developments contribute to the fact that handball is now one of the most injury-prone types of sport, with the lower extremities being most frequently affected. Reactive jump training is not only used in training by now, but also increasingly in injury prevention. The aim of this study was to investigate the effectiveness of reactive jump training with handball players. 21 regional league handball players were randomly divided into an intervention group (n = 12) and a control group (n = 9). The intervention group completed a six-week reactive jump training programme while the control group went through a non-specific training programme. Jump height (squat and counter movement jump), isokinetic and isometric maximum power as well as muscle activity served as measuring parameters. A comparison of the intervention and control groups revealed that the reactive jump training led to significant improvements in jump height. The isometric and isokinetic maximum power measurements and the electromyographic activities of the triceps surae muscle demonstrated an improvement in the values within the intervention group. However, this improvement was not significant compared with the control group. Likewise both jumps correlated with the muscle activity of the soleus muscle as shown by electromyography. A moderate correlation was noticed between the isokinetic maximum power measurement and the electromyographic activity of the soleus and gastrocnemius medialis muscles. Furthermore, the correlations of the isometric and isokinetic maximum power meas-urements resulted in a strong correlation coefficient. This study revealed a significant increase in jump height after reactive jump training. There was no significant difference in power development between the two groups. However, we were able to demonstrate correlations which would make it seem reasonable and interesting to investigate the question more closely. An interesting field of research could be the question of the effectiveness of reactive jump training in the areas of rehabilitation and injury prevention. © Georg Thieme Verlag KG Stuttgart · New York.

Modelling structural and plasma facing materials for fusion power plants: Recent advances and outstanding issues in the EURATOM fusion materials programme

NASA Astrophysics Data System (ADS)

Boutard, Jean-Louis; Dudarev, Sergei; Rieth, Michael

2011-10-01

EFDA Fusion Materials Topical Group was established at the end of 2007 to coordinate the EU effort on the development of structural and protection materials able to withstand the very demanding operating conditions of a future DEMO power plant. Focusing on a selection of well identified materials issues, including the behaviour of Reduced Activation Ferritic-Martensitic steels, and W-alloys under the foreseen operation conditions in a future DEMO, this paper describes recent advances in physical modelling and experimental validation, contributing to the definition of chemical composition and microstructure of materials with improved in-service stability at high temperature, high neutron flux and intense ion bombardment.

Status of HiLASE project: High average power pulsed DPSSL systems for research and industry

NASA Astrophysics Data System (ADS)

Mocek, T.; Divoky, M.; Smrz, M.; Sawicka, M.; Chyla, M.; Sikocinski, P.; Vohnikova, H.; Severova, P.; Lucianetti, A.; Novak, J.; Rus, B.

2013-11-01

We introduce the Czech national R&D project HiLASE which focuses on strategic development of advanced high-repetition rate, diode pumped solid state laser (DPSSL) systems that may find use in research, high-tech industry and in the future European large-scale facilities such as HiPER and ELI. Within HiLASE we explore two major concepts: thin-disk and cryogenically cooled multislab amplifiers capable of delivering average output powers above 1 kW level in picosecond-to-nanosecond pulsed regime. In particular, we have started a programme of technology development to demonstrate the scalability of multislab concept up to the kJ level at repetition rate of 1-10 Hz.

An Integrated Programmable Wide-range PLL for Switching Synchronization in Isolated DC-DC Converters

NASA Astrophysics Data System (ADS)

Fard, Miad

In this thesis, two Phase-Locked-Loop (PLL) based synchronization schemes are introduced and applied to a bi-directional Dual-Active-Bridge (DAB) dc-dc converter with an input voltage up to 80 V switching in the range of 250 kHz to 1 MHz. The two schemes synchronize gating signals across an isolated boundary without the need for an isolator per transistor. The Power Transformer Sensing (PTS) method utilizes the DAB power transformer to indirectly sense switching on the secondary side of the boundary, while the Digital Isolator Sensing (DIS) method utilizes a miniature transformer for synchronization and communication at up to 100 MHz. The PLL is implemented on-chip, and is used to control an external DAB power-stage. This work will lead to lower cost, high-frequency isolated dc-dc converters needed for a wide variety of emerging low power applications where isolator cost is relatively high and there is a demand for the reduction of parts.

Algorithm architecture co-design for ultra low-power image sensor

NASA Astrophysics Data System (ADS)

Laforest, T.; Dupret, A.; Verdant, A.; Lattard, D.; Villard, P.

2012-03-01

In a context of embedded video surveillance, stand alone leftbehind image sensors are used to detect events with high level of confidence, but also with a very low power consumption. Using a steady camera, motion detection algorithms based on background estimation to find regions in movement are simple to implement and computationally efficient. To reduce power consumption, the background is estimated using a down sampled image formed of macropixels. In order to extend the class of moving objects to be detected, we propose an original mixed mode architecture developed thanks to an algorithm architecture co-design methodology. This programmable architecture is composed of a vector of SIMD processors. A basic RISC architecture was optimized in order to implement motion detection algorithms with a dedicated set of 42 instructions. Definition of delta modulation as a calculation primitive has allowed to implement algorithms in a very compact way. Thereby, a 1920x1080@25fps CMOS image sensor performing integrated motion detection is proposed with a power estimation of 1.8 mW.

Adjustable Nyquist-rate System for Single-Bit Sigma-Delta ADC with Alternative FIR Architecture

NASA Astrophysics Data System (ADS)

Frick, Vincent; Dadouche, Foudil; Berviller, Hervé

2016-09-01

This paper presents a new smart and compact system dedicated to control the output sampling frequency of an analogue-to-digital converters (ADC) based on single-bit sigma-delta (ΣΔ) modulator. This system dramatically improves the spectral analysis capabilities of power network analysers (power meters) by adjusting the ADC's sampling frequency to the input signal's fundamental frequency with a few parts per million accuracy. The trade-off between straightforwardness and performance that motivated the choice of the ADC's architecture are preliminary discussed. It particularly comes along with design considerations of an ultra-steep direct-form FIR that is optimised in terms of size and operating speed. Thanks to compact standard VHDL language description, the architecture of the proposed system is particularly suitable for application-specific integrated circuit (ASIC) implementation-oriented low-power and low-cost power meter applications. Field programmable gate array (FPGA) prototyping and experimental results validate the adjustable sampling frequency concept. They also show that the system can perform better in terms of implementation and power capabilities compared to dedicated IP resources.

Effects of Plymetrics Training and Weight Training on selected Motor Ability Components among University Male Students

NASA Astrophysics Data System (ADS)

Shaikh, Alauddin; Mallick, Nazrul Islam

2012-11-01

Introduction: The aim of this study was to find out the effects of plyometrics training and weight training among university male students.Procedure: 60 male students from the different colleges of the Burdwan University were randomly selected as subjects and their age were 19-25 years served as Weight training Group (WTG), second group served as Plyometric Training Group (PTG) and the third group served as Control Group (CT). Eight weeks weight training and six weeks plyometric training were given for experiment accordingly. The control group was not given any training except of their routine. The selected subjects were measured of their motor ability components, speed, endurance, explosive power and agility. ANCOVA was calculation for statistical treatment.Finding: Plyometric training and weight training groups significantly increase speed, endurance, explosive power and agility.Conclusion: The plyometric training has significantly improved speed, explosive power, muscular endurance and agility. The weight training programme has significantly improved agility, muscular endurance, and explosive power. The plometric training is superior to weight training in improving explosive power, agility and muscular endurance.

Association of Syscenus infelix (Crustacea: Isopoda: Aegidae) with benthopelagic rattail fishes, Nezumia spp. (Macrouridae), along the western North Atlantic continental slope

USGS Publications Warehouse

Ross, Steve W.; Sulak, K.J.; Munroe, T.A.

2001-01-01

During submersible surveys along the continental slope (summers of 1991 and 1992, 184-847 m) between False Cape, Virginia, and Cape Hatteras, North Carolina, USA, we observed the aegid isopod, Syscenus infelix Harger, attached to the macrourid Nezumia bairdii (Goode and Bean). This is the first report of S. infelix attached to fishes in the western North Atlantic. The association of this blind isopod with its host appears species specific. The large, conspicuous isopod always attached to a fish in the same location, the dorsal midline, immediately behind the first dorsal fin. Attachment appears to be long term, with the isopod forming a characteristic scar consisting of a distinct discolored oval depression with seven small, dark impressions that coalesce as the fish grows. Only one S. infelix was found on each host fish. The isopod occurred on 23.7% of N. bairdii observed from submersible on the middle continental slope off Virginia and North Carolina, compared with 16.6% of 1236 museum specimens of the same species (based on inspection for scars) collected at latitudes 26??-64??N. Prevalence of the fish-isopod association was not correlated with depth or latitude. We also found identical scars on preserved specimens of N. aequalis (2.6% of 660 specimens), N. sclerorhynchus (1.2% of 86 specimens), and N. suilla (14.3% of 7 specimens), mostly from areas outside the range of N. bairdii. No scars were found on museum specimens of N. atlantica (n = 27), N. cyrano (n = 57), or N. longebarbata (n = 7). The low incidence of isopod attachment on these species suggests that N. bairdii is the preferred host. Infestation by the isopod appears to result in erosion of host fish scales and tissue. We propose that S. infelix is an obligate associate of its host fish and should be considered parasitic.

Logic operations based on magnetic-vortex-state networks.

PubMed

Jung, Hyunsung; Choi, Youn-Seok; Lee, Ki-Suk; Han, Dong-Soo; Yu, Young-Sang; Im, Mi-Young; Fischer, Peter; Kim, Sang-Koog

2012-05-22

Logic operations based on coupled magnetic vortices were experimentally demonstrated. We utilized a simple chain structure consisting of three physically separated but dipolar-coupled vortex-state Permalloy disks as well as two electrodes for application of the logical inputs. We directly monitored the vortex gyrations in the middle disk, as the logical output, by time-resolved full-field soft X-ray microscopy measurements. By manipulating the relative polarization configurations of both end disks, two different logic operations are programmable: the XOR operation for the parallel polarization and the OR operation for the antiparallel polarization. This work paves the way for new-type programmable logic gates based on the coupled vortex-gyration dynamics achievable in vortex-state networks. The advantages are as follows: a low-power input signal by means of resonant vortex excitation, low-energy dissipation during signal transportation by selection of low-damping materials, and a simple patterned-array structure.

Field-programmable gate array implementation of an all-digital IEEE 802.15.4-compliant transceiver

NASA Astrophysics Data System (ADS)

Cornetta, Gianluca; Touhafi, Abdellah; Santos, David J.; Vázquez, José M.

2010-12-01

An architecture for a low-cost, low-complexity digital transceiver is presented in this article. The proposed architecture targets the IEEE 802.15.4 standard for short-range wireless personal area networks and has been implemented as a synthesisable VHDL register transfer level description. The system has been evaluated and tested using a Xilinx 90 nm Virtex-4 field-programmable gate array as the target technology. Bit error rate (BER) and error vector magnitude (EVM) have been used as the figures of merit for modem performance. Simulations show that the recommended minimum BER is achieved at E b/N 0 = 8.7 dB, whereas the EVM is 19.5%. The implemented device occupies 10% of the target FPGA and has a normalised maximum power consumption of 44 mW in transmit mode and 53 mW in receiver mode.

Molecular implementation of simple logic programs.

PubMed

Ran, Tom; Kaplan, Shai; Shapiro, Ehud

2009-10-01

Autonomous programmable computing devices made of biomolecules could interact with a biological environment and be used in future biological and medical applications. Biomolecular implementations of finite automata and logic gates have already been developed. Here, we report an autonomous programmable molecular system based on the manipulation of DNA strands that is capable of performing simple logical deductions. Using molecular representations of facts such as Man(Socrates) and rules such as Mortal(X) <-- Man(X) (Every Man is Mortal), the system can answer molecular queries such as Mortal(Socrates)? (Is Socrates Mortal?) and Mortal(X)? (Who is Mortal?). This biomolecular computing system compares favourably with previous approaches in terms of expressive power, performance and precision. A compiler translates facts, rules and queries into their molecular representations and subsequently operates a robotic system that assembles the logical deductions and delivers the result. This prototype is the first simple programming language with a molecular-scale implementation.

[Medical ethics in prison medicine].

PubMed

Bernheim, J

1980-11-01

A series of situations and decisions involving medical ethics in a prison medical service are discussed. The doctor's independence is considered in relation to his contract with administrative authorities. In contrast with most private doctor-patient relationships, there is usually no possibility for prisoners to choose their doctor and vice-versa. Freedom of consent on the part of the patient may also imply a right to no-treatment. Medical care in prison is not easy to delineate, also because patients often try to involve the doctor in non-medical demands. A prison doctor should avoid taking part in decisions which ought to be made by the judiciary or by administrative authorities. Programmes involving preventive medicine and sociotherapy imply collaboration between therapeutic and security staff. The continuous interplay and readjustment between powers based on public authority, on the rights of each individual prisoner and on the medical programmes makes it possible for some sort of therapeutic freedom to exist in the prison.

A 1microW 85nV/ radicalHz pseudo open-loop preamplifier with programmable band-pass filter for neural interface system.

PubMed

Chang, Sun-Il; Yoon, Euisik

2009-01-01

We report an energy efficient pseudo open-loop amplifier with programmable band-pass filter developed for neural interface systems. The proposed amplifier consumes 400nA at 2.5V power supply. The measured thermal noise level is 85nV/ radicalHz and input-referred noise is 1.69microV(rms) from 0.3Hz to 1 kHz. The amplifier has a noise efficiency factor of 2.43, the lowest in the differential topologies reported up to date to our knowledge. By programming the switched-capacitor frequency and bias current, we could control the bandwidth of the preamplifier from 138 mHz to 2.2 kHz to meet various application requirements. The entire preamplifier including band-pass filters has been realized in a small area of 0.043mm(2) using a 0.25microm CMOS technology.

Deep learning with coherent nanophotonic circuits

NASA Astrophysics Data System (ADS)

Shen, Yichen; Harris, Nicholas C.; Skirlo, Scott; Prabhu, Mihika; Baehr-Jones, Tom; Hochberg, Michael; Sun, Xin; Zhao, Shijie; Larochelle, Hugo; Englund, Dirk; Soljačić, Marin

2017-07-01

Artificial neural networks are computational network models inspired by signal processing in the brain. These models have dramatically improved performance for many machine-learning tasks, including speech and image recognition. However, today's computing hardware is inefficient at implementing neural networks, in large part because much of it was designed for von Neumann computing schemes. Significant effort has been made towards developing electronic architectures tuned to implement artificial neural networks that exhibit improved computational speed and accuracy. Here, we propose a new architecture for a fully optical neural network that, in principle, could offer an enhancement in computational speed and power efficiency over state-of-the-art electronics for conventional inference tasks. We experimentally demonstrate the essential part of the concept using a programmable nanophotonic processor featuring a cascaded array of 56 programmable Mach-Zehnder interferometers in a silicon photonic integrated circuit and show its utility for vowel recognition.

A programmable DNA origami nanospring that reveals force-induced adjacent binding of myosin VI heads

PubMed Central

Iwaki, M.; Wickham, S. F.; Ikezaki, K.; Yanagida, T.; Shih, W. M.

2016-01-01

Mechanosensitive biological nanomachines such as motor proteins and ion channels regulate diverse cellular behaviour. Combined optical trapping with single-molecule fluorescence imaging provides a powerful methodology to clearly characterize the mechanoresponse, structural dynamics and stability of such nanomachines. However, this system requires complicated experimental geometry, preparation and optics, and is limited by low data-acquisition efficiency. Here we develop a programmable DNA origami nanospring that overcomes these issues. We apply our nanospring to human myosin VI, a mechanosensory motor protein, and demonstrate nanometre-precision single-molecule fluorescence imaging of the individual motor domains (heads) under force. We observe force-induced transitions of myosin VI heads from non-adjacent to adjacent binding, which correspond to adapted roles for low-load and high-load transport, respectively. Our technique extends single-molecule studies under force and clarifies the effect of force on biological processes. PMID:27941751

Thermal monitoring, measurement, and control system for a Volatile Condensable Materials (VCM) test apparatus

NASA Technical Reports Server (NTRS)

Ives, R. E.

1982-01-01

A thermal monitoring and control concept is described for a volatile condensable materials (VCM) test apparatus where electric resistance heaters are employed. The technique is computer based, but requires only proportioning ON/OFF relay control signals supplied through a programmable scanner and simple quadrac power controllers. System uniqueness is derived from automatic temperature measurements and the averaging of these measurements in discrete overlapping temperature zones. Overall control tolerance proves to be better than + or - 0.5 C from room ambient temperature to 150 C. Using precisely calibrated thermocouples, the method provides excellent temperature control of a small copper VCM heating plate at 125 + or - 0.2 C over a 24 hr test period. For purposes of unattended operation, the programmable computer/controller provides a continual data printout of system operation. Real time operator command is also provided for, as is automatic shutdown of the system and operator alarm in the event of malfunction.

Programmable solid state atom sources for nanofabrication.

PubMed

Han, Han; Imboden, Matthias; Stark, Thomas; del Corro, Pablo G; Pardo, Flavio; Bolle, Cristian A; Lally, Richard W; Bishop, David J

2015-06-28

In this paper we discuss the development of a MEMS-based solid state atom source that can provide controllable atom deposition ranging over eight orders of magnitude, from ten atoms per square micron up to hundreds of atomic layers, on a target ∼1 mm away. Using a micron-scale silicon plate as a thermal evaporation source we demonstrate the deposition of indium, silver, gold, copper, iron, aluminum, lead and tin. Because of their small sizes and rapid thermal response times, pulse width modulation techniques are a powerful way to control the atomic flux. Pulsing the source with precise voltages and timing provides control in terms of when and how many atoms get deposited. By arranging many of these devices into an array, one has a multi-material, programmable solid state evaporation source. These micro atom sources are a complementary technology that can enhance the capability of a variety of nano-fabrication techniques.

Saving water in showers

NASA Astrophysics Data System (ADS)

Alkhaddar, R. A.; Phipps, D.; Morgan, R.; Karci, B.; Hordesseux, J.

2007-07-01

This project is part of a programme aimed at reducing water consumption. Power showers are water inefficient, but in order to persuade the user to accept a lower water use it will be necessary to sustain the "shower experience" to maintain user satisfaction. Previous work has indicated that users' requirements include temperature stability, adequate water volume and distribution, and skin pressure, all of which are substantially controlled by the showerhead. In the present phase of the project several commercially available domestic showerheads have been examined to determine pressure-volume characteristics, radial spray distributions at different flow rates, direct and indirect measures of "skin pressure" and measurements of vertical temperature profiles. Part of the practical work at LJMU has supported extensive theoretical studies by CFD carried out by staff at Arup (consulting engineers) for the Market Transformation Programme. A future phase will study user satisfaction in their own homes where user satisfaction will be surveyed and linked to the physical performance of the shower.

Non-viral delivery of genome-editing nucleases for gene therapy.

PubMed

Wang, M; Glass, Z A; Xu, Q

2017-03-01

Manipulating the genetic makeup of mammalian cells using programmable nuclease-based genome-editing technology has recently evolved into a powerful avenue that holds great potential for treating genetic disorders. There are four types of genome-editing nucleases, including meganucleases, zinc finger nucleases, transcription activator-like effector nucleases and clustered, regularly interspaced, short palindromic repeat-associated nucleases such as Cas9. These nucleases have been harnessed to introduce precise and specific changes of the genome sequence at virtually any genome locus of interest. The therapeutic relevance of these genome-editing technologies, however, is challenged by the safe and efficient delivery of nuclease into targeted cells. Herein, we summarize recent advances that have been made on non-viral delivery of genome-editing nucleases. In particular, we focus on non-viral delivery of Cas9/sgRNA ribonucleoproteins for genome editing. In addition, the future direction for developing non-viral delivery of programmable nucleases for genome editing is discussed.

A programmable DNA origami nanospring that reveals force-induced adjacent binding of myosin VI heads.

PubMed

Iwaki, M; Wickham, S F; Ikezaki, K; Yanagida, T; Shih, W M

2016-12-12

Mechanosensitive biological nanomachines such as motor proteins and ion channels regulate diverse cellular behaviour. Combined optical trapping with single-molecule fluorescence imaging provides a powerful methodology to clearly characterize the mechanoresponse, structural dynamics and stability of such nanomachines. However, this system requires complicated experimental geometry, preparation and optics, and is limited by low data-acquisition efficiency. Here we develop a programmable DNA origami nanospring that overcomes these issues. We apply our nanospring to human myosin VI, a mechanosensory motor protein, and demonstrate nanometre-precision single-molecule fluorescence imaging of the individual motor domains (heads) under force. We observe force-induced transitions of myosin VI heads from non-adjacent to adjacent binding, which correspond to adapted roles for low-load and high-load transport, respectively. Our technique extends single-molecule studies under force and clarifies the effect of force on biological processes.

Self-Propelled Hovercraft Based on Cold Leidenfrost Phenomenon

PubMed Central

Shi, Meng; Ji, Xing; Feng, Shangsheng; Yang, Qingzhen; Lu, Tian Jian; Xu, Feng

2016-01-01

The Leidenfrost phenomenon of liquid droplets levitating and dancing when placed upon a hot plate due to propulsion of evaporative vapor has been extended to many self-propelled circumstances. However, such self-propelled Leidenfrost devices commonly need a high temperature for evaporation and a structured solid substrate for directional movements. Here we observed a “cold Leidenfrost phenomenon” when placing a dry ice device on the surface of room temperature water, based on which we developed a controllable self-propelled dry ice hovercraft. Due to the sublimated vapor, the hovercraft could float on water and move in a programmable manner through designed structures. As demonstrations, we showed that the hovercraft could be used as a cargo ship or a petroleum contamination collector without consuming external power. This phenomenon enables a novel way to utilize programmable self-propelled devices on top of room temperature water, holding great potential for applications in energy, chemical engineering and biology. PMID:27338595

Self-Propelled Hovercraft Based on Cold Leidenfrost Phenomenon.

PubMed

Shi, Meng; Ji, Xing; Feng, Shangsheng; Yang, Qingzhen; Lu, Tian Jian; Xu, Feng

2016-06-24

The Leidenfrost phenomenon of liquid droplets levitating and dancing when placed upon a hot plate due to propulsion of evaporative vapor has been extended to many self-propelled circumstances. However, such self-propelled Leidenfrost devices commonly need a high temperature for evaporation and a structured solid substrate for directional movements. Here we observed a "cold Leidenfrost phenomenon" when placing a dry ice device on the surface of room temperature water, based on which we developed a controllable self-propelled dry ice hovercraft. Due to the sublimated vapor, the hovercraft could float on water and move in a programmable manner through designed structures. As demonstrations, we showed that the hovercraft could be used as a cargo ship or a petroleum contamination collector without consuming external power. This phenomenon enables a novel way to utilize programmable self-propelled devices on top of room temperature water, holding great potential for applications in energy, chemical engineering and biology.

Therapeutic education among adults with type 2 diabetes: effects of a three-day intervention on perceived competence, self-management behaviours and glycaemic control.

PubMed

Trouilloud, David; Regnier, Jennifer

2013-06-01

The purpose of this study was to evaluate the impact of a three-day therapeutic education programme on perceived competence, self-management behaviours (i.e. physical activity, diet and medication) and glycaemic control among adults with type 2 diabetes. A total of 120 participants were included in this randomized, wait list control group trial. The results confirm that therapeutic education may be a powerful healthcare intervention to improve lifestyle and health status of people with type 2 diabetes. We observed that the education programme used in this study generated positive changes in glycaemic control and adherence to physical activity and diet after three months follow-up. Furthermore, the intervention positively impacted participants' perceived competence towards physical activity and diet. The latter finding is of particular importance, given that perceived competence has been found to be involved in long-term adherence to self-management behaviours.

An evaluation of a professional learning network for computer science teachers

NASA Astrophysics Data System (ADS)

Cutts, Quintin; Robertson, Judy; Donaldson, Peter; O'Donnell, Laurie

2017-01-01

This paper describes and evaluates aspects of a professional development programme for existing CS teachers in secondary schools (PLAN C) which was designed to support teachers at a time of substantial curricular change. The paper's particular focus is on the formation of a teacher professional development network across several hundred teachers and a wide geographical area. Evidence from a series of observations and teacher surveys over a two-year period is analysed with respect to the project's programme theory in order to illustrate not only whether it worked as intended, by why. Results indicate that the PLAN C design has been successful in increasing teachers' professional confidence and appears to have catalysed powerful change in attitudes to learning. Presentation of challenging pedagogical content knowledge and conceptual frameworks, high-quality teacher-led professional dialogue, along with the space for reflection and classroom trials, triggered examination of the teachers' own current practices.

Math Machines: Using Actuators in Physics Classes

NASA Astrophysics Data System (ADS)

Thomas, Frederick J.; Chaney, Robert A.; Gruesbeck, Marta

2018-01-01

Probeware (sensors combined with data-analysis software) is a well-established part of physics education. In engineering and technology, sensors are frequently paired with actuators—motors, heaters, buzzers, valves, color displays, medical dosing systems, and other devices that are activated by electrical signals to produce intentional physical change. This article describes how a 20-year project aimed at better integration of the STEM disciplines (science, technology, engineering and mathematics) uses brief actuator activities in physics instruction. Math Machines "actionware" includes software and hardware that convert virtually any free-form, time-dependent algebraic function into the dynamic actions of a stepper motor, servo motor, or RGB (red, green, blue) color mixer. With wheels and a platform, the stepper motor becomes LACI, a programmable vehicle. Adding a low-power laser module turns the servo motor into a programmable Pointer. Adding a gear and platform can transform the Pointer into an earthquake simulator.

Assessment of forest biomass for use as energy. GIS-based analysis of geographical availability and locations of wood-fired power plants in Portugal

Treesearch

H. Viana; Warren B. Cohen; D. Lopes; J. Aranha

2010-01-01

Following the European Union strategy concerning renewable energy (RE), Portugal established in their national policy programmes that the production of electrical energy from RE should reach 45% of the total supply by 2010. Since Portugal has large forest biomass resources, a significant part of this energy will be obtained from this source. In addition to the two...

Low-Cost Space Hardware and Software

NASA Technical Reports Server (NTRS)

Shea, Bradley Franklin

2013-01-01

The goal of this project is to demonstrate and support the overall vision of NASA's Rocket University (RocketU) through the design of an electrical power system (EPS) monitor for implementation on RUBICS (Rocket University Broad Initiatives CubeSat), through the support for the CHREC (Center for High-Performance Reconfigurable Computing) Space Processor, and through FPGA (Field Programmable Gate Array) design. RocketU will continue to provide low-cost innovations even with continuous cuts to the budget.

Applications of charge-coupled device transversal filters to communication

NASA Technical Reports Server (NTRS)

Buss, D. D.; Bailey, W. H.; Brodersen, R. W.; Hewes, C. R.; Tasch, A. F., Jr.

1975-01-01

The paper discusses the computational power of state-of-the-art charged-coupled device (CCD) transversal filters in communications applications. Some of the performance limitations of CCD transversal filters are discussed, with attention given to time delay and bandwidth, imperfect charge transfer efficiency, weighting coefficient error, noise, and linearity. The application of CCD transversal filters to matched filtering, spectral filtering, and Fourier analysis is examined. Techniques for making programmable transversal filters are briefly outlined.

Analysis of IUE spectra using the interactive data language

NASA Technical Reports Server (NTRS)

Joseph, C. L.

1981-01-01

The Interactive Data Language (IDL) is used to analyze high resolution spectra from the IUE. Like other interactive languages, IDL is designed for use by the scientist rather than the professional programmer, allowing him to conceive of his data as simple entities and to operate on this data with minimal difficulty. A package of programs created to analyze interstellar absorption lines is presented as an example of the graphical power of IDL.

The Design and Development of the SMEX-Lite Power System

NASA Technical Reports Server (NTRS)

Rakow, Glenn P.; Schnurr, Richard G., Jr.; Solly, Michael A.

1998-01-01

This paper describes the design and development of a 250W orbit average electrical power system electronic Power Node and software for use in Low Earth Orbit missions. The mass of the Power Node is 3.6 Kg (8 lb.). The dimensions of the Power Node are 30cm x 26cm x 7.9cm (11 in. x 10.25 in x 3.1 in.) The design was realized using software, Field Programmable Gate Array (FPGA) digital logic and surface mount technology. The design is generic enough to reduce the non-recurring engineering for different mission configurations. The Power Node charges one to five, low cost, 22-cell 4 AH D-cell battery packs independently. The battery charging algorithms are executed in the power software to reduce the mass and size of the power electronic. The Power Node implements a peak-power tracking algorithm using an innovative hardware/software approach. The power software task is hosted on the spacecraft processor. The power software task generates a MIL-STD-1553 command packet to update the Power Node control settings. The settings for the battery voltage and current limits, as well as minimum solar array voltage used to implement peak power tracking are contained in this packet. Several advanced topologies are used in the Power Node. These include synchronous rectification in the bus regulators, average current control in the battery chargers and quasi-resonant converters for the Field Effect Transistor (FET) transistor drive electronics. Lastly, the main bus regulator uses a feed-forward topology with the PWM implemented in an FPGA.

Do weight management programmes delivered at professional football clubs attract and engage high risk men? A mixed-methods study.

PubMed

Hunt, Kate; Gray, Cindy M; Maclean, Alice; Smillie, Susan; Bunn, Christopher; Wyke, Sally

2014-01-21

The prevalence of obesity in men in the UK is amongst the highest in Europe but men are less likely than women to use existing weight loss programmes. Developing weight management programmes which are appealing and acceptable to men is a public health priority. Football Fans in Training (FFIT), a men-only weight management programme delivered to groups of men at top professional football clubs, encourages men to lose weight by working with, not against, cultural ideals of masculinity. To inform further development of interventions in football club settings, the current study explored who is attracted to FFIT and why overweight/obese men choose to take part. A mixed-methods study analysing baseline data on 747 men aged 35-65 years with BMI ≥ 28 kg/m2 who were participants in a randomised controlled trial of FFIT, and data from 13 focus group discussions with 63 men who had attended the programme. Objectively-measured mean body mass index was 35.3 kg/m2 (sd 4.9). Overall over 90% of participants were at very high or extremely high risk of future ill-health. Around three-quarters of participants in all age groups were at 'very high' risk of type 2 diabetes, hypertension and cardiovascular disease (72%, 73% and 80% of men aged 35-44, 45-54 and 55-64 years respectively). A further 21%, 16% and 13% were at 'extremely high' risk. Qualitative data revealed that the powerful 'draw' of the football club attracted men otherwise reluctant to attend existing weight management programmes. The location and style of delivery of early FFIT sessions fostered team spirit; men appreciated being with others 'like them' and the opportunity to undertake weight management in circumstances that enhanced physical and symbolic proximity to something they valued highly, the football club. The delivery of a weight management intervention via professional football clubs attracted men at high risk of ill-health. The setting enabled men to join a weight management programme in circumstances that felt 'right' rather than threatening to themselves as men. FFIT is an example of how to facilitate health promotion activities in a way that is consistent with, rather than challenging to, common ideals of masculinity.

Efficacy of 8- and 4-Session Mindfulness-Based Interventions in a Non-clinical Population: A Controlled Study.

PubMed

Demarzo, Marcelo; Montero-Marin, Jesus; Puebla-Guedea, Marta; Navarro-Gil, Mayte; Herrera-Mercadal, Paola; Moreno-González, Sergio; Calvo-Carrión, Sandra; Bafaluy-Franch, Laura; Garcia-Campayo, Javier

2017-01-01

Background: Many attempts have been made to abbreviate mindfulness programmes in order to make them more accessible for general and clinical populations while maintaining their therapeutic components and efficacy. The aim of this study was to assess the efficacy of an 8-week mindfulness-based intervention (MBI) programme and a 4-week abbreviated version for the improvement of well-being in a non-clinical population. Method: A quasi-experimental, controlled, pilot study was conducted with pre-post and 6-month follow-up measurements and three study conditions (8- and 4-session MBI programmes and a matched no-treatment control group, with a sample of 48, 46, and 47 participants in each condition, respectively). Undergraduate students were recruited, and mindfulness, positive and negative affect, self-compassion, resilience, anxiety, and depression were assessed. Mixed-effects multi-level analyses for repeated measures were performed. Results: The intervention groups showed significant improvements compared to controls in mindfulness and positive affect at the 2- and 6-month follow-ups, with no differences between 8- vs. 4-session programmes. The only difference between the abbreviated MBI vs. the standard MBI was found in self-kindness at 6 months, favoring the standard MBI. There were marginal differences in anxiety between the controls vs. the abbreviated MBI, but there were differences between the controls vs. the standard MBI at 2- and 6-months, with higher levels in the controls. There were no differences in depression between the controls vs. the abbreviated MBI, but differences were found between the controls vs. the standard MBI at 2- and 6-months, favoring the standard MBI. There were no differences with regard to negative affect and resilience. Conclusion: To our knowledge, this is the first study to directly investigate the efficacy of a standard 8-week MBI and a 4-week abbreviated protocol in the same population. Based on our findings, both programmes performed better than controls, with similar effect size (ES). The efficacy of abbreviated mindfulness programmes may be similar to that of a standard MBI programme, making them potentially more accessible for a larger number of populations. Nevertheless, further studies with more powerful designs to compare the non-inferiority of the abbreviated protocol and addressing clinical populations are warranted. Clinical Trials.gov Registration ID: NCT02643927.

Do weight management programmes delivered at professional football clubs attract and engage high risk men? A mixed-methods study

PubMed Central

2014-01-01

Background The prevalence of obesity in men in the UK is amongst the highest in Europe but men are less likely than women to use existing weight loss programmes. Developing weight management programmes which are appealing and acceptable to men is a public health priority. Football Fans in Training (FFIT), a men-only weight management programme delivered to groups of men at top professional football clubs, encourages men to lose weight by working with, not against, cultural ideals of masculinity. To inform further development of interventions in football club settings, the current study explored who is attracted to FFIT and why overweight/obese men choose to take part. Methods A mixed-methods study analysing baseline data on 747 men aged 35–65 years with BMI ≥ 28 kg/m2 who were participants in a randomised controlled trial of FFIT, and data from 13 focus group discussions with 63 men who had attended the programme. Results Objectively-measured mean body mass index was 35.3 kg/m2 (sd 4.9). Overall over 90% of participants were at very high or extremely high risk of future ill-health. Around three-quarters of participants in all age groups were at ‘very high’ risk of type 2 diabetes, hypertension and cardiovascular disease (72%, 73% and 80% of men aged 35–44, 45–54 and 55–64 years respectively). A further 21%, 16% and 13% were at ‘extremely high’ risk. Qualitative data revealed that the powerful ‘draw’ of the football club attracted men otherwise reluctant to attend existing weight management programmes. The location and style of delivery of early FFIT sessions fostered team spirit; men appreciated being with others ‘like them’ and the opportunity to undertake weight management in circumstances that enhanced physical and symbolic proximity to something they valued highly, the football club. Conclusions The delivery of a weight management intervention via professional football clubs attracted men at high risk of ill-health. The setting enabled men to join a weight management programme in circumstances that felt ‘right’ rather than threatening to themselves as men. FFIT is an example of how to facilitate health promotion activities in a way that is consistent with, rather than challenging to, common ideals of masculinity. PMID:24443845

Progress on the decommissioning of Zion nuclear generating station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moloney, B. P.; Hess, J.

2013-07-01

The decommissioning of the twin 1040 MWe PWRs at Zion, near Chicago USA is a ground breaking programme. The original owner, Exelon Nuclear Corporation, transferred the full responsibility for reactor dismantling and site license termination to a subsidiary of EnergySolutions. The target end state of the Zion site for return to Exelon will be a green field with the exception of the dry fuel storage pad. In return, ZionSolutions has access to the full value of the decommissioning trust fund. There are two potential attractions of this model: lower overall cost and significant schedule acceleration. The Zion programme which commencedmore » in September 2010 is designed to return the cleared site with an Independent Spent Fuel Storage Installation (ISFSI) pad in 2020, 12 years earlier than planned by Exelon. The overall cost, at $500 M per full size power reactor is significantly below the long run trend of $750 M+ per PWR. Implementation of the accelerated programme has been underway for nearly three years and is making good progress. The programme is characterised by numerous projects proceeding in parallel. The critical path is defined by the inspection and removal of fuel from the pond and transfer into dry fuel storage casks on the ISFSI pad and completion of RPV segmentation. Fuel loading is expected to commence in mid- 2013 with completion in late 2014. In parallel, ZionSolutions is proceeding with the segmentation of the Reactor Vessel (RV) and internals in both Units. Removal of large components from Unit 1 is underway. Numerous other projects are underway or have been completed to date. They include access openings into both containments, installation of heavy lift crane capacity, rail upgrades to support waste removal from the site, radiological characterization of facilities and equipment and numerous related tasks. As at February 2013, the programme is just ahead of schedule and within the latest budget. The paper will provide a fuller update. The first two years of the Zion programme offer some interesting learning opportunities. The critical importance of leadership and project control systems will be emphasised in the paper. Strong supplier relationships and good community cooperation are essential. A learning and adaptable team, incentivised to meet schedule and budget, drives affordability of the whole programme. Our key lessons so far concern organisation and people as much as engineering and technology. (authors)« less

Efficacy of 8- and 4-Session Mindfulness-Based Interventions in a Non-clinical Population: A Controlled Study

PubMed Central

Demarzo, Marcelo; Montero-Marin, Jesus; Puebla-Guedea, Marta; Navarro-Gil, Mayte; Herrera-Mercadal, Paola; Moreno-González, Sergio; Calvo-Carrión, Sandra; Bafaluy-Franch, Laura; Garcia-Campayo, Javier

2017-01-01

Background: Many attempts have been made to abbreviate mindfulness programmes in order to make them more accessible for general and clinical populations while maintaining their therapeutic components and efficacy. The aim of this study was to assess the efficacy of an 8-week mindfulness-based intervention (MBI) programme and a 4-week abbreviated version for the improvement of well-being in a non-clinical population. Method: A quasi-experimental, controlled, pilot study was conducted with pre-post and 6-month follow-up measurements and three study conditions (8- and 4-session MBI programmes and a matched no-treatment control group, with a sample of 48, 46, and 47 participants in each condition, respectively). Undergraduate students were recruited, and mindfulness, positive and negative affect, self-compassion, resilience, anxiety, and depression were assessed. Mixed-effects multi-level analyses for repeated measures were performed. Results: The intervention groups showed significant improvements compared to controls in mindfulness and positive affect at the 2- and 6-month follow-ups, with no differences between 8- vs. 4-session programmes. The only difference between the abbreviated MBI vs. the standard MBI was found in self-kindness at 6 months, favoring the standard MBI. There were marginal differences in anxiety between the controls vs. the abbreviated MBI, but there were differences between the controls vs. the standard MBI at 2- and 6-months, with higher levels in the controls. There were no differences in depression between the controls vs. the abbreviated MBI, but differences were found between the controls vs. the standard MBI at 2- and 6-months, favoring the standard MBI. There were no differences with regard to negative affect and resilience. Conclusion: To our knowledge, this is the first study to directly investigate the efficacy of a standard 8-week MBI and a 4-week abbreviated protocol in the same population. Based on our findings, both programmes performed better than controls, with similar effect size (ES). The efficacy of abbreviated mindfulness programmes may be similar to that of a standard MBI programme, making them potentially more accessible for a larger number of populations. Nevertheless, further studies with more powerful designs to compare the non-inferiority of the abbreviated protocol and addressing clinical populations are warranted. Clinical Trials.gov Registration ID: NCT02643927 PMID:28848465

Remote Monitor Alarm System

NASA Technical Reports Server (NTRS)

Stute, Robert A. (Inventor); Galloway, F. Houston (Inventor); Medelius, Pedro J. (Inventor); Swindle, Robert W. (Inventor); Bierman, Tracy A. (Inventor)

1996-01-01

A remote monitor alarm system monitors discrete alarm and analog power supply voltage conditions at remotely located communications terminal equipment. A central monitoring unit (CMU) is connected via serial data links to each of a plurality of remote terminal units (RTUS) that monitor the alarm and power supply conditions of the remote terminal equipment. Each RTU can monitor and store condition information of both discrete alarm points and analog power supply voltage points in its associated communications terminal equipment. The stored alarm information is periodically transmitted to the CMU in response to sequential polling of the RTUS. The number of monitored alarm inputs and permissible voltage ranges for the analog inputs can be remotely configured at the CMU and downloaded into programmable memory at each RTU. The CMU includes a video display, a hard disk memory, a line printer and an audio alarm for communicating and storing the alarm information received from each RTU.

Hierarchical MFMO Circuit Modules for an Energy-Efficient SDR DBF

NASA Astrophysics Data System (ADS)

Mar, Jeich; Kuo, Chi-Cheng; Wu, Shin-Ru; Lin, You-Rong

The hierarchical multi-function matrix operation (MFMO) circuit modules are designed using coordinate rotations digital computer (CORDIC) algorithm for realizing the intensive computation of matrix operations. The paper emphasizes that the designed hierarchical MFMO circuit modules can be used to develop a power-efficient software-defined radio (SDR) digital beamformer (DBF). The formulas of the processing time for the scalable MFMO circuit modules implemented in field programmable gate array (FPGA) are derived to allocate the proper logic resources for the hardware reconfiguration. The hierarchical MFMO circuit modules are scalable to the changing number of array branches employed for the SDR DBF to achieve the purpose of power saving. The efficient reuse of the common MFMO circuit modules in the SDR DBF can also lead to energy reduction. Finally, the power dissipation and reconfiguration function in the different modes of the SDR DBF are observed from the experiment results.

Reconfigurable intelligent sensors for health monitoring: a case study of pulse oximeter sensor.

PubMed

Jovanov, E; Milenkovic, A; Basham, S; Clark, D; Kelley, D

2004-01-01

Design of low-cost, miniature, lightweight, ultra low-power, intelligent sensors capable of customization and seamless integration into a body area network for health monitoring applications presents one of the most challenging tasks for system designers. To answer this challenge we propose a reconfigurable intelligent sensor platform featuring a low-power microcontroller, a low-power programmable logic device, a communication interface, and a signal conditioning circuit. The proposed solution promises a cost-effective, flexible platform that allows easy customization, run-time reconfiguration, and energy-efficient computation and communication. The development of a common platform for multiple physical sensors and a repository of both software procedures and soft intellectual property cores for hardware acceleration will increase reuse and alleviate costs of transition to a new generation of sensors. As a case study, we present an implementation of a reconfigurable pulse oximeter sensor.

Design Tools for Reconfigurable Hardware in Orbit (RHinO)

NASA Technical Reports Server (NTRS)

French, Mathew; Graham, Paul; Wirthlin, Michael; Larchev, Gregory; Bellows, Peter; Schott, Brian

2004-01-01

The Reconfigurable Hardware in Orbit (RHinO) project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. These tools leverage an established FPGA design environment and focus primarily on space effects mitigation and power optimization. The project is creating software to automatically test and evaluate the single-event-upsets (SEUs) sensitivities of an FPGA design and insert mitigation techniques. Extensions into the tool suite will also allow evolvable algorithm techniques to reconfigure around single-event-latchup (SEL) events. In the power domain, tools are being created for dynamic power visualiization and optimization. Thus, this technology seeks to enable the use of Reconfigurable Hardware in Orbit, via an integrated design tool-suite aiming to reduce risk, cost, and design time of multimission reconfigurable space processors using SRAM-based FPGAs.

Power estimation on functional level for programmable processors

NASA Astrophysics Data System (ADS)

Schneider, M.; Blume, H.; Noll, T. G.

2004-05-01

In diesem Beitrag werden verschiedene Ansätze zur Verlustleistungsschätzung von programmierbaren Prozessoren vorgestellt und bezüglich ihrer Übertragbarkeit auf moderne Prozessor-Architekturen wie beispielsweise Very Long Instruction Word (VLIW)-Architekturen bewertet. Besonderes Augenmerk liegt hierbei auf dem Konzept der sogenannten Functional-Level Power Analysis (FLPA). Dieser Ansatz basiert auf der Einteilung der Prozessor-Architektur in funktionale Blöcke wie beispielsweise Processing-Unit, Clock-Netzwerk, interner Speicher und andere. Die Verlustleistungsaufnahme dieser Bl¨ocke wird parameterabhängig durch arithmetische Modellfunktionen beschrieben. Durch automatisierte Analyse von Assemblercodes des zu schätzenden Systems mittels eines Parsers können die Eingangsparameter wie beispielsweise der erzielte Parallelitätsgrad oder die Art des Speicherzugriffs gewonnen werden. Dieser Ansatz wird am Beispiel zweier moderner digitaler Signalprozessoren durch eine Vielzahl von Basis-Algorithmen der digitalen Signalverarbeitung evaluiert. Die ermittelten Schätzwerte für die einzelnen Algorithmen werden dabei mit physikalisch gemessenen Werten verglichen. Es ergibt sich ein sehr kleiner maximaler Schätzfehler von 3%. In this contribution different approaches for power estimation for programmable processors are presented and evaluated concerning their capability to be applied to modern digital signal processor architectures like e.g. Very Long InstructionWord (VLIW) -architectures. Special emphasis will be laid on the concept of so-called Functional-Level Power Analysis (FLPA). This approach is based on the separation of the processor architecture into functional blocks like e.g. processing unit, clock network, internal memory and others. The power consumption of these blocks is described by parameter dependent arithmetic model functions. By application of a parser based automized analysis of assembler codes of the systems to be estimated the input parameters of the Correspondence to: H. Blume (blume@eecs.rwth-aachen.de) arithmetic functions like e.g. the achieved degree of parallelism or the kind and number of memory accesses can be computed. This approach is exemplarily demonstrated and evaluated applying two modern digital signal processors and a variety of basic algorithms of digital signal processing. The resulting estimation values for the inspected algorithms are compared to physically measured values. A resulting maximum estimation error of 3% is achieved.

Scientific and technical challenges on the road towards fusion electricity

NASA Astrophysics Data System (ADS)

Donné, A. J. H.; Federici, G.; Litaudon, X.; McDonald, D. C.

2017-10-01

The goal of the European Fusion Roadmap is to deliver fusion electricity to the grid early in the second half of this century. It breaks the quest for fusion energy into eight missions, and for each of them it describes a research and development programme to address all the open technical gaps in physics and technology and estimates the required resources. It points out the needs to intensify industrial involvement and to seek all opportunities for collaboration outside Europe. The roadmap covers three periods: the short term, which runs parallel to the European Research Framework Programme Horizon 2020, the medium term and the long term. ITER is the key facility of the roadmap as it is expected to achieve most of the important milestones on the path to fusion power. Thus, the vast majority of present resources are dedicated to ITER and its accompanying experiments. The medium term is focussed on taking ITER into operation and bringing it to full power, as well as on preparing the construction of a demonstration power plant DEMO, which will for the first time demonstrate fusion electricity to the grid around the middle of this century. Building and operating DEMO is the subject of the last roadmap phase: the long term. Clearly, the Fusion Roadmap is tightly connected to the ITER schedule. Three key milestones are the first operation of ITER, the start of the DT operation in ITER and reaching the full performance at which the thermal fusion power is 10 times the power put in to the plasma. The Engineering Design Activity of DEMO needs to start a few years after the first ITER plasma, while the start of the construction phase will be a few years after ITER reaches full performance. In this way ITER can give viable input to the design and development of DEMO. Because the neutron fluence in DEMO will be much higher than in ITER, it is important to develop and validate materials that can handle these very high neutron loads. For the testing of the materials, a dedicated 14 MeV neutron source is needed. This DEMO Oriented Neutron Source (DONES) is therefore an important facility to support the fusion roadmap.

Load shifting with the use of home energy management system implemented in FPGA

NASA Astrophysics Data System (ADS)

Bazydło, Grzegorz; Wermiński, Szymon

2017-08-01

The increases for power demand in the Electrical Power System (EPS) causes a significant increase of power in daily load curve and transmission line overload. The large variability in energy consumption in EPS combined with unpredictable weather events can lead to a situation in which to save the stability of the EPS, the power limits must be introduced or even industrial customers in a given area have to be disconnected, which causes financial losses. Nowadays, a Transmission System Operator is looking for additional solutions to reduce peak power, because existing approaches (mainly building new intervention power unit or tariff programs) are not satisfactory due to the high cost of services in combination with insufficient power reduction effect. The paper presents an approach to load shifting with the use of home Energy Management System (EMS) installed at small end-users. The home energy management algorithm, executed by EMS controller, is modeled using Unified Modeling Language (UML). Then, the UML model is translated into Verilog description, and is finally implemented in the Field Programmable Gate Arrays. The advantages of the proposed approach are the relatively low cost of reduction service, small loss of end-users' comfort, and the convenient maintenance of EMS. A practical example illustrating the proposed approach and calculation of potential gains from its implementation are also presented.

A structured exercise programme during haemodialysis for patients with chronic kidney disease: clinical benefit and long-term adherence.

PubMed

Anding, Kirsten; Bär, Thomas; Trojniak-Hennig, Joanna; Kuchinke, Simone; Krause, Rolfdieter; Rost, Jan M; Halle, Martin

2015-08-27

Long-term studies regarding the effect of a structured physical exercise programme (SPEP) during haemodialysis (HD) assessing compliance and clinical benefit are scarce. A single-centre clinical trial, non-randomised, investigating 46 patients with HD (63.2 ± 16.3 years, male/female 24/22, dialysis vintage 4.4 years) performing an SPEP over 5 years. The SPEP (twice/week for 60 min during haemodialysis) consisted of a combined resistance (8 muscle groups) and endurance (supine bicycle ergometry) training. Exercise intensity was continuously adjusted to improvements of performance testing. Changes in endurance and resistance capacity, physical functioning and quality of life (QoL) were analysed over 1 year in addition to long-term adherence and economics of the programme over 5 years. Average power per training session, maximal strength tests (maximal exercise repetitions/min), three performance-based tests for physical function, SF36 for QoL were assessed in the beginning and every 6 months thereafter. 78% of the patients completed the programme after 1 year and 43% after 5 years. Participants were divided--according to adherence to the programme--into three groups: (1) high adherence group (HA, >80% of 104 training sessions within 12 months), (2) moderate adherence (MA, 60-80%), and 3. Low adherence group (LA, <60%)) with HA and MA evaluated quantitatively. One-year follow-up data revealed significant (p<0.05) improvement for both groups in all measured parameters: exercise capacity (HA: 55%, MA: 45%), strength (HA: >120%, MA: 40-50%), QoL in three scores of SF36 subscales and physical function in the three tests taken between 11% and 31%. Moreover, a quantitative correlation analysis revealed a close association (r=0.8) between large improvement of endurance capacity and weak physical condition (HA). The exercise programme described improves physical function significantly and can be integrated into a HD routine with a high long-term adherence. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Promoting universal financial protection: constraints and enabling factors in scaling-up coverage with social health insurance in Nigeria.

PubMed

Onoka, Chima A; Onwujekwe, Obinna E; Uzochukwu, Benjamin S; Ezumah, Nkoli N

2013-06-13

The National Health Insurance Scheme (NHIS) in Nigeria was launched in 2005 as part of efforts by the federal government to achieve universal coverage using financial risk protection mechanisms. However, only 4% of the population, and mainly federal government employees, are currently covered by health insurance and this is primarily through the Formal Sector Social Health Insurance Programme (FSSHIP) of the NHIS. This study aimed to understand why different state (sub-national) governments decided whether or not to adopt the FSSHIP for their employees. This study used a comparative case study approach. Data were collected through document reviews and 48 in-depth interviews with policy makers, programme managers, health providers, and civil servant leaders. Although the programme's benefits seemed acceptable to state policy makers and the intended beneficiaries (employees), the feasibility of employer contributions, concerns about transparency in the NHIS and the role of states in the FSSHIP, the roles of policy champions such as state governors and resistance by employees to making contributions, all influenced the decision of state governments on adoption. Overall, the power of state governments over state-level health reforms, attributed to the prevailing system of government that allows states to deliberate on certain national-level policies, enhanced by the NHIS legislation that made adoption voluntary, enabled states to adopt or not to adopt the program. The study demonstrates and supports observations that even when the content of a programme is generally acceptable, context, actor roles, and the wider implications of programme design on actor interests can explain decision on policy adoption. Policy implementers involved in scaling-up the NHIS programme need to consider the prevailing contextual factors, and effectively engage policy champions to overcome known challenges in order to encourage adoption by sub-national governments. Policy makers and implementers in countries scaling-up health insurance coverage should, early enough, develop strategies to overcome political challenges inherent in the path to scaling-up, to avoid delay or stunting of the process. They should also consider the potential pitfalls of reforms that first focus on civil servants, especially when the use of public funds potentially compromises coverage for other citizens.

Seroepidemiology: an underused tool for designing and monitoring vaccination programmes in low- and middle-income countries.

PubMed

Cutts, Felicity T; Hanson, Matt

2016-09-01

Seroepidemiology, the use of data on the prevalence of bio-markers of infection or vaccination, is a potentially powerful tool to understand the epidemiology of infection before vaccination and to monitor the effectiveness of vaccination programmes. Global and national burden of disease estimates for hepatitis B and rubella are based almost exclusively on serological data. Seroepidemiology has helped in the design of measles, poliomyelitis and rubella elimination programmes, by informing estimates of the required population immunity thresholds for elimination. It contributes to monitoring of these programmes by identifying population immunity gaps and evaluating the effectiveness of vaccination campaigns. Seroepidemiological data have also helped to identify contributing factors to resurgences of diphtheria, Haemophilus Influenzae type B and pertussis. When there is no confounding by antibodies induced by natural infection (as is the case for tetanus and hepatitis B vaccines), seroprevalence data provide a composite picture of vaccination coverage and effectiveness, although they cannot reliably indicate the number of doses of vaccine received. Despite these potential uses, technological, time and cost constraints have limited the widespread application of this tool in low-income countries. The use of venous blood samples makes it difficult to obtain high participation rates in surveys, but the performance of assays based on less invasive samples such as dried blood spots or oral fluid has varied greatly. Waning antibody levels after vaccination may mean that seroprevalence underestimates immunity. This, together with variation in assay sensitivity and specificity and the common need to take account of antibody induced by natural infection, means that relatively sophisticated statistical analysis of data is required. Nonetheless, advances in assays on minimally invasive samples may enhance the feasibility of including serology in large survey programmes in low-income countries. In this paper, we review the potential uses of seroepidemiology to improve vaccination policymaking and programme monitoring and discuss what is needed to broaden the use of this tool in low- and middle-income countries. © 2016 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

Effectiveness of a structured education reminiscence-based programme for staff on the quality of life of residents with dementia in long-stay units: a study protocol for a cluster randomised trial.

PubMed

O'Shea, Eamon; Devane, Declan; Murphy, Kathy; Cooney, Adeline; Casey, Dympna; Jordan, Fionnuala; Hunter, Andrew; Murphy, Edel

2011-02-14

Current projections indicate that there will be a significant increase in the number of people with dementia in Ireland, from approximately 40,000 at present to 100,000 by 2036. Psychosocial interventions, such as reminiscence, have the potential to improve the quality of life of people with dementia. However, while reminiscence is used widely in dementia care, its impact on the quality of life of people with dementia remains largely undocumented and there is a need for a robust and fair assessment of its overall effectiveness. The DementiA education programme incorporating REminiscence for Staff study will evaluate the effectiveness of a structured reminiscence-based education programme for care staff on the quality of life of residents with dementia in long-stay units. The study is a two-group, single-blind cluster randomised trial conducted in public and private long-stay residential settings in Ireland. Randomisation to control and intervention is at the level of the long-stay residential unit. Sample size calculations suggest that 18 residential units each containing 17 people with dementia are required for randomisation to control and intervention groups to achieve power of at least 80% with alpha levels of 0.05. Each resident in the intervention group is linked with a nurse and care assistant who have taken the structured reminiscence-based education programme. Participants in the control group will receive usual care. The primary outcome is quality of life of residents as measured by the Quality of Life-AD instrument. Secondary outcomes include agitation, depression and carer burden. Blinded outcome assessment is undertaken at baseline and at 18-22 weeks post-randomisation. Trials on reminiscence-based interventions for people with dementia have been scarce and the quality of the information arising from those that have been done has been undermined by methodological problems, particularly in relation to scale and scope. This trial is powered to deliver more credible and durable results. The trial may also convey process utility to a long-stay system in Ireland that has not been geared for education and training, especially in relation to dementia. The results of this trial are applicable to long-stay residential units in Ireland and internationally. Current Controlled Trials ISRCTN99651465.

Aquatic exercise training and stable heart failure: A systematic review and meta-analysis.

PubMed

Adsett, Julie A; Mudge, Alison M; Morris, Norman; Kuys, Suzanne; Paratz, Jennifer D

2015-01-01

A meta-analysis and review of the evidence was conducted to determine the efficacy of aquatic exercise training for individuals with heart failure compared to traditional land-based programmes. A systematic search was conducted for studies published prior to March 2014, using MEDLINE, PUBMED, Cochrane Library, CINAHL and PEDro databases. Key words and synonyms relating to aquatic exercise and heart failure comprised the search strategy. Interventions included aquatic exercise or a combination of aquatic plus land-based training, whilst comparator protocols included usual care, no exercise or land-based training alone. The primary outcome of interest was exercise performance. Studies reporting on muscle strength, quality of life and a range of haemodynamic and physiological parameters were also reviewed. Eight studies met criteria, accounting for 156 participants. Meta-analysis identified studies including aquatic exercise to be superior to comparator protocols for 6 minute walk test (p < 0.004) and peak power (p < 0.044). Compared to land-based training programmes, aquatic exercise training provided similar benefits for VO(2peak), muscle strength and quality of life, though was not superior. Cardiac dimensions, left ventricular ejection fraction, cardiac output and BNP were not influenced by aquatic exercise training. For those with stable heart failure, aquatic exercise training can improve exercise capacity, muscle strength and quality of life similar to land-based training programmes. This form of exercise may provide a safe and effective alternative for those unable to participate in traditional exercise programmes. Crown Copyright © 2015. Published by Elsevier Ireland Ltd. All rights reserved.

The 6-PACK programme to decrease fall-related injuries in acute hospitals: protocol for a cluster randomised controlled trial.

PubMed

Barker, Anna; Brand, Caroline; Haines, Terry; Hill, Keith; Brauer, Sandy; Jolley, Damien; Botti, Mari; Cumming, Robert; Livingston, Patricia M; Sherrington, Cathie; Zavarsek, Silva; Morello, Renata; Kamar, Jeannette

2011-08-01

In-hospital fall-related injuries are a source of personal harm, preventable hospitalisation costs, and access block through increased length of stay. Despite increased fall prevention awareness and activity over the last decade, rates of reported fall-related fractures in hospitals appear not to have decreased. This cluster randomised controlled trial (RCT) aims to determine the efficacy of the 6-PACK programme for preventing fall-related injuries, and its generalisability to other acute hospitals. 24 acute medical and surgical wards from six to eight hospitals throughout Australia will be recruited for the study. Wards will be matched by type and fall-related injury rates, then randomly allocated to the 6-PACK intervention (12 wards) or usual care control group (12 wards). The 6-PACK programme includes a nine-item fall risk assessment and six nursing interventions: 'falls alert' sign; supervision of patients in the bathroom; ensuring patient's walking aids are within reach; establishment of a toileting regime; use of a low-low bed; and use of bed/chair alarm. Intervention wards will be supported by a structured implementation strategy. The primary outcomes are fall and fall-related injury rates 12 months following 6-PACK implementation. This study will involve approximately 16,000 patients, and as such is planned to be the largest hospital fall prevention RCT to be undertaken and the first to be powered for the important outcome of fall-related injuries. If effective, there is potential to implement the programme widely as part of daily patient care in acute hospital wards where fall-related injuries are a problem.

3D Printed Programmable Release Capsules.

PubMed

Gupta, Maneesh K; Meng, Fanben; Johnson, Blake N; Kong, Yong Lin; Tian, Limei; Yeh, Yao-Wen; Masters, Nina; Singamaneni, Srikanth; McAlpine, Michael C

2015-08-12

The development of methods for achieving precise spatiotemporal control over chemical and biomolecular gradients could enable significant advances in areas such as synthetic tissue engineering, biotic-abiotic interfaces, and bionanotechnology. Living organisms guide tissue development through highly orchestrated gradients of biomolecules that direct cell growth, migration, and differentiation. While numerous methods have been developed to manipulate and implement biomolecular gradients, integrating gradients into multiplexed, three-dimensional (3D) matrices remains a critical challenge. Here we present a method to 3D print stimuli-responsive core/shell capsules for programmable release of multiplexed gradients within hydrogel matrices. These capsules are composed of an aqueous core, which can be formulated to maintain the activity of payload biomolecules, and a poly(lactic-co-glycolic) acid (PLGA, an FDA approved polymer) shell. Importantly, the shell can be loaded with plasmonic gold nanorods (AuNRs), which permits selective rupturing of the capsule when irradiated with a laser wavelength specifically determined by the lengths of the nanorods. This precise control over space, time, and selectivity allows for the ability to pattern 2D and 3D multiplexed arrays of enzyme-loaded capsules along with tunable laser-triggered rupture and release of active enzymes into a hydrogel ambient. The advantages of this 3D printing-based method include (1) highly monodisperse capsules, (2) efficient encapsulation of biomolecular payloads, (3) precise spatial patterning of capsule arrays, (4) "on the fly" programmable reconfiguration of gradients, and (5) versatility for incorporation in hierarchical architectures. Indeed, 3D printing of programmable release capsules may represent a powerful new tool to enable spatiotemporal control over biomolecular gradients.

Assessing acute coronary syndrome patients' cardiac-related beliefs, motivation and mood over time to predict non-attendance at cardiac rehabilitation.

PubMed

Herber, Oliver R; Jones, Martyn C; Smith, Karen; Johnston, Derek W

2012-12-01

This research protocol describes and justifies a study to assess patients' cardiac-related beliefs (i.e. illness representations, knowledge/misconceptions, cardiac treatment beliefs), motivation and mood over time to predict non-attendance at a cardiac rehabilitation programme by measuring weekly/monthly changes in these key variables. Heart disease is the UK's leading cause of death. Evidence from meta-analyses suggests that cardiac rehabilitation facilitates recovery following acute cardiac events. However, 30-60% of patients do not attend cardiac rehabilitation. There is some evidence from questionnaire studies that a range of potentially modifiable psychological variables including patients' cardiac-related beliefs, motivation and mood may influence attendance. Mixed-methods. In this study, during 2012-2013, electronic diary data will be gathered weekly/monthly from 240 patients with acute coronary syndrome from discharge from hospital until completion of the cardiac rehabilitation programme. This will identify changes and interactions between key variables over time and their power to predict non-attendance at cardiac rehabilitation. Data will be analysed to examine the relationship between patients' illness perceptions, cardiac treatment beliefs, knowledge/misconceptions, mood and non-attendance of the cardiac rehabilitation programme. The qualitative component (face-to-face interviews) seeks to explore why patients decide not to attend, not complete or complete the cardiac rehabilitation programme. The identification of robust predictors of (non-)attendance is important for the design and delivery of interventions aimed at optimizing cardiac rehabilitation uptake. Funding for the study was granted in February 2011 by the Scottish Government Chief Scientist Office (CZH/4/650). © 2012 Blackwell Publishing Ltd.

Multi-channel programmable power supply with temperature compensation for silicon sensors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shukla, R. A.; Achanta, V. G.; Dugad, S. R., E-mail: dugad@cern.ch

Silicon Photo-Multipliers (SiPMs) are increasingly becoming popular for discrete photon counting applications due to the wealth of advantages they offer over conventional photo-detectors such as photo-multiplier tubes and hybrid photo-diodes. SiPMs are used in variety of applications ranging from high energy physics and nuclear physics experiments to medical diagnostics. The gain of a SiPM is directly proportional to the difference between applied and breakdown voltage of the device. However, the breakdown voltage depends critically on the ambient temperature and has a large temperature co-efficient in the range of 40-60 mV/°C resulting in a typical gain variation of 3%-5%/°C [Dinu etmore » al., in IEEE Nuclear Science Symposium, Medical Imaging Conference and 17th Room Temperature Semiconductor Detector Workshop (IEEE, 2010), p. 215]. We plan to use the SiPM as a replacement for PMT in the cosmic ray experiment (GRAPES-3) at Ooty [Gupta et al., Nucl. Instrum. Methods Phys. Res., Sect. A 540, 311 (2005)]. There the SiPMs will be operated in an outdoor environment subjected to temperature variation of about 15 °C over a day. A gain variation of more than 50% was observed for such large variations in the temperature. To stabilize the gain of the SiPM under such operating conditions, a low-cost, multi-channel programmable power supply (0-90 V) was designed that simultaneously provides the bias voltage to 16 SiPMs. The programmable power supply (PPS) was designed to automatically adjust the operating voltage for each channel with a built-in closed loop temperature feedback mechanism. The PPS provides bias voltage with a precision of 6 mV and measures the load current with a precision of 1 nA. Using this PPS, a gain stability of 0.5% for SiPM (Hamamatsu, S10931-050P) has been demonstrated over a wide temperature range of 15 °C. The design methodology of the PPS system, its validation, and the results of the tests carried out on the SiPM is presented in this article. The proposed design also has the capability of gain stabilization of devices with non-linear thermal response.« less

Our bodies are our own: resistance to ABC-based HIV-prevention programmes in northern Tanzanian conservation organisations.

PubMed

Reid-Hresko, John

2014-01-01

ABC-based HIV-prevention programmes have been widely employed in northern Tanzanian wildlife conservation settings in an attempt to (re)shape the sexual behaviours of conservation actors. Utilising findings from 66 semi-structured interviews conducted in 2009-2010, this paper examines ABC prevention as a form of Foucauldian governmentality--circulating technologies of power that mobilise disciplinary technologies and attempt to transform such efforts into technologies of the self--and explores how individuals understand and respond to attempts to govern their behaviour. ABC regimes attempt to rework subjectivity, positioning HIV-related behaviours within a risk-based neoliberal rationality. However, efforts to use ABC as a technology to govern populations and individual bodies are largely incommensurate with existing Tanzanian sociocultural formations, including economic and gendered inequalities, and local understandings of sexuality. The language research participants used to talk about ABC and the justifications they offered for non-compliance illuminate this discrepancy. Data reveal that the recipients of ABC campaigns are active producers of understandings that work for them in their lives, but may not produce the behavioural shifts envisioned by programme goals. These findings corroborate previous research, which questions the continued plausibility of ABC as a stand-alone HIV- prevention framework.

Up-scaling expectations among Pakistan's HIV bureaucrats: entrepreneurs of the self and job precariousness post-scale-up.

PubMed

Qureshi, Ayaz

2014-01-01

Existing research has documented how the expansion of HIV programming has produced new subjectivities among the recipients of interventions. However, this paper contends that changes in politics, power and subjectivities may also be seen among the HIV bureaucracy in the decade of scale-up. One year's ethnographic fieldwork was conducted among AIDS control officials in Pakistan at a moment of rolling back a World Bank-financed Enhanced Programme. In 2003, the World Bank convinced the Musharraf regime to scale up the HIV response, offering a multimillion dollar soft loan package. I explore how the Enhanced Programme initiated government employees into a new transient work culture and turned the AIDS control programmes into a hybrid bureaucracy. However, the donor money did not last long and individuals' entrepreneurial abilities were tested in a time of crisis engendered by dependence on aid, leaving them precariously exposed to job insecurity, and undermining the continuity of AIDS prevention and treatment in the country. I do not offer a story of global 'best practices' thwarted by local 'lack of capacity', but an ethnographic critique of the transnational HIV apparatus and its neoliberal underpinning. I suggest that this Pakistan-derived analysis is more widely relevant in the post-scale-up decade.

The retinal renin-angiotensin system: implications for therapy in diabetic retinopathy.

PubMed

Sjølie, A K; Chaturvedi, N

2002-08-01

Retinopathy is the most common complication of diabetes, and a leading cause of blindness in people of working age. Optimal blood pressure and metabolic control can reduce the risk of diabetic retinopathy, but are difficult to achieve in clinical practice. In the EUCLID Study, the angiotensin converting enzyme (ACE) inhibitor lisinopril reduced the risk of progression of retinopathy by approximately 50%, and also significantly reduced the risk of progression to proliferative retinopathy. These findings are consistent with extensive evidence that the renin-angiotensin system is expressed in the eye, and that adverse effects of angiotensin II on retinal angiogenesis and function can be inhibited by ACE inhibitors or angiotensin II-receptor blockers. However, in the EUCLID Study retinopathy was not a primary end-point and the study was not sufficiently powered for the eye-related outcomes. Hence, the Diabetic Retinopathy Candesartan Trials (DIRECT) programme has been established to determine whether AT(1)-receptor blockade with candesartan can prevent the incidence and progression of diabetic retinopathy. This programme comprises three studies, involving a total of 4500 patients recruited from about 300 centres worldwide. The patients are normotensive or treated hypertensive individuals, and so the DIRECT programme should assess the potential of an AT(1)-receptor blocker to protect against the pathological changes in the eye following diabetes.

Multiresponsive Kinematics and Robotics of Surface-Patterned Polymer Film.

PubMed

Liang, Shumin; Qiu, Xiaxin; Yuan, Jun; Huang, Wei; Du, Xuemin; Zhang, Lidong

2018-06-06

Soft robots, sensors, and energy harvesters require materials that are capable of converting external stimuli to visible deformations, especially when shape-programmable deformations are desired. Herein, we develop a polymer film that can reversibly respond to humidity, heating, and acetone vapors with the generation of shape-programmable large deformations. Poly(vinylidene fluoride) film, capable of providing acetone responsiveness, is designed with microchannel patterns created on its one side by using templates, and the microchannels-patterned side is then treated with hygroscopic 3-aminopropyltriethoxysilane (APTES) to give humidity/heating-responsive elements. The APTES-modified microchannels lead to anisotropic flexural modulus and hygroscopicity in the film, resulting in the shape-programmed kinematics depending on the orientations of surface microchannels. As the microchannels align at oblique/right angles with respect to the long axis of the film strips, the coiling/curling motions can be generated in response to the stimuli, and the better motion performances are found in humidity- and heating-driven systems. This material utilized in self-adaptive soft robots exhibits prominent toughness, powerful strength, and long endurance for converting humidity and heat to mechanical works including transportation of lightweight objects, automatic sensing cap, and mimicking crawling in nature. We thus believe that this material with shape-programmable multisensing capability might be suitable for soft machines and robotics.

Concurrent Collections (CnC): A new approach to parallel programming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knobe, Kathleen

2010-05-07

A common approach in designing parallel languages is to provide some high level handles to manipulate the use of the parallel platform. This exposes some aspects of the target platform, for example, shared vs. distributed memory. It may expose some but not all types of parallelism, for example, data parallelism but not task parallelism. This approach must find a balance between the desire to provide a simple view for the domain expert and provide sufficient power for tuning. This is hard for any given architecture and harder if the language is to apply to a range of architectures. Either simplicitymore » or power is lost. Instead of viewing the language design problem as one of providing the programmer with high level handles, we view the problem as one of designing an interface. On one side of this interface is the programmer (domain expert) who knows the application but needs no knowledge of any aspects of the platform. On the other side of the interface is the performance expert (programmer or program) who demands maximal flexibility for optimizing the mapping to a wide range of target platforms (parallel / serial, shared / distributed, homogeneous / heterogeneous, etc.) but needs no knowledge of the domain. Concurrent Collections (CnC) is based on this separation of concerns. The talk will present CnC and its benefits. About the speaker. Kathleen Knobe has focused throughout her career on parallelism especially compiler technology, runtime system design and language design. She worked at Compass (aka Massachusetts Computer Associates) from 1980 to 1991 designing compilers for a wide range of parallel platforms for Thinking Machines, MasPar, Alliant, Numerix, and several government projects. In 1991 she decided to finish her education. After graduating from MIT in 1997, she joined Digital Equipment’s Cambridge Research Lab (CRL). She stayed through the DEC/Compaq/HP mergers and when CRL was acquired and absorbed by Intel. She currently works in the Software and Services Group / Technology Pathfinding and Innovation.« less

Concurrent Collections (CnC): A new approach to parallel programming

ScienceCinema

Knobe, Kathleen

2018-04-16

A common approach in designing parallel languages is to provide some high level handles to manipulate the use of the parallel platform. This exposes some aspects of the target platform, for example, shared vs. distributed memory. It may expose some but not all types of parallelism, for example, data parallelism but not task parallelism. This approach must find a balance between the desire to provide a simple view for the domain expert and provide sufficient power for tuning. This is hard for any given architecture and harder if the language is to apply to a range of architectures. Either simplicity or power is lost. Instead of viewing the language design problem as one of providing the programmer with high level handles, we view the problem as one of designing an interface. On one side of this interface is the programmer (domain expert) who knows the application but needs no knowledge of any aspects of the platform. On the other side of the interface is the performance expert (programmer or program) who demands maximal flexibility for optimizing the mapping to a wide range of target platforms (parallel / serial, shared / distributed, homogeneous / heterogeneous, etc.) but needs no knowledge of the domain. Concurrent Collections (CnC) is based on this separation of concerns. The talk will present CnC and its benefits. About the speaker. Kathleen Knobe has focused throughout her career on parallelism especially compiler technology, runtime system design and language design. She worked at Compass (aka Massachusetts Computer Associates) from 1980 to 1991 designing compilers for a wide range of parallel platforms for Thinking Machines, MasPar, Alliant, Numerix, and several government projects. In 1991 she decided to finish her education. After graduating from MIT in 1997, she joined Digital Equipment’s Cambridge Research Lab (CRL). She stayed through the DEC/Compaq/HP mergers and when CRL was acquired and absorbed by Intel. She currently works in the Software and Services Group / Technology Pathfinding and Innovation.

Emerging Applications of Liquid Crystals Based on Nanotechnology

PubMed Central

Sohn, Jung Inn; Hong, Woong-Ki; Choi, Su Seok; Coles, Harry J.; Welland, Mark E.; Cha, Seung Nam; Kim, Jong Min

2014-01-01

Diverse functionalities of liquid crystals (LCs) offer enormous opportunities for their potential use in advanced mobile and smart displays, as well as novel non-display applications. Here, we present snapshots of the research carried out on emerging applications of LCs ranging from electronics to holography and self-powered systems. In addition, we will show our recent results focused on the development of new LC applications, such as programmable transistors, a transparent and active-type two-dimensional optical array and self-powered display systems based on LCs, and will briefly discuss their novel concepts and basic operating principles. Our research will give insights not only into comprehensively understanding technical and scientific applications of LCs, but also developing new discoveries of other LC-based devices. PMID:28788555

Solar powered rotorcraft: a multidisciplinary engineering challenge for undergraduate students

NASA Astrophysics Data System (ADS)

Danner, Aaron J.; Henz, Martin; Teo, Brian Shohei

2017-08-01

Controlled, fully solar-powered flight in a rotorcraft is a difficult engineering challenge. Over the past five years, multidiciplinary teams of undergraduate engineering students at the National University of Singapore have built and test-flown a succession of increasingly impressive and larger, more efficient aircraft. While many other multidisciplinary or purely photonics projects are available to students in our programme, this particular project attracts an unusual level of excitement and devotion among students working on it. Why is that the case, and what, in general, makes a good final year undergraduate design project? These questions will be explored. Additionally, videos of solar helicopter test flights and spectacular crashes will be shown in the presentation for which the proceedings below have been prepared.

Time-delayed directional beam phased array antenna

DOEpatents

Fund, Douglas Eugene; Cable, John William; Cecil, Tony Myron

2004-10-19

An antenna comprising a phased array of quadrifilar helix or other multifilar antenna elements and a time-delaying feed network adapted to feed the elements. The feed network can employ a plurality of coaxial cables that physically bridge a microstrip feed circuitry to feed power signals to the elements. The cables provide an incremental time delay which is related to their physical lengths, such that replacing cables having a first set of lengths with cables having a second set of lengths functions to change the time delay and shift or steer the antenna's main beam. Alternatively, the coaxial cables may be replaced with a programmable signal processor unit adapted to introduce the time delay using signal processing techniques applied to the power signals.

PSAW/MicroSWIS [Microminiature Surface Acoustic Wave (SAW) based Wirelesss Instrumentation System

NASA Technical Reports Server (NTRS)

Heermann, Doug; Krug, Eric

2004-01-01

This Final Report for the PSAW/MicroSWIS Program is provided in compliance with contract number NAS3-01118. This report documents the overall progress of the program and presents project objectives, work carried out, and results obtained. Program Conceptual Design Package stated the following objectives: To develop a sensor/transceiver network that can support networking operations within spacecraft with sufficient bandwidth so that (1) flight control data, (2) avionics data, (3) payload/experiment data, and (4) prognostic health monitoring sensory information can flow to appropriate locations at frequencies that contain the maximum amount of information content but require minimum interconnect and power: a very high speed, low power, programmable modulation, spread-spectrum radio sensor/transceiver.

The Formal Specification of a Visual display Device: Design and Implementation.

DTIC Science & Technology

1985-06-01

The use of these data structures with their defined operations, give the programmer a very powerful instructions set. Like the DPU code generator in...which any AM hosted machine could faithfully display. 27 In- general , most applications have no need to create images from a data structure representing...formation of standard functional interfaces to these resources. OS’s generally do not provide a functional interface to either the processor or the display2

Achieving total quality through intelligence.

PubMed

Fuld, L M

1992-02-01

American firms want 'total quality'. The time and money spent by U.S. companies attempting to qualify for the coveted Baldrige Award exemplifies corporate America's desire to achieve new quality standards. Corporate intelligence and 'total quality' are inextricably linked. In this article, the authors demonstrate how shared and properly-used information can be a powerful tool for elevating quality standards, and how corporate intelligence programmes can provide the information links vital for success in attaining the highest standards of quality.

Measurement Uncertainty Within the Uniform Engine Test Programme

DTIC Science & Technology

1989-05-01

Design to Cost and l.ifc (.cle Cost to Aircraft Engines AGARD LS 107 (May 1980) Microcomputer Applications in Power and Propulsion Systems AGARD LS...Flows in Propulsion Systems AGARD LS 140 (June 1985) Engine Airframe Integration for Rotorcraft AGARD LS 148 (June 1986) Design Methods Used in Solid...modest nero-thermodynamic design was of no consequence. Two engines were loaned to the proeram by the U.S. Air Force. Due to higher priority test workload

Using a Commercial Ethernet PHY Device in a Radiation Environment

NASA Technical Reports Server (NTRS)

Parks, Jeremy; Arani, Michael; Arroyo, Roberto

2014-01-01

This work involved placing a commercial Ethernet PHY on its own power boundary, with limited current supply, and providing detection methods to determine when the device is not operating and when it needs either a reset or power-cycle. The device must be radiation-tested and free of destructive latchup errors. The commercial Ethernet PHY's own power boundary must be supplied by a current-limited power regulator that must have an enable (for power cycling), and its maximum power output must not exceed the PHY's input requirements, thus preventing damage to the device. A regulator with configurable output limits and short-circuit protection (such as the RHFL4913, rad hard positive voltage regulator family) is ideal. This will prevent a catastrophic failure due to radiation (such as a short between the commercial device's power and ground) from taking down the board's main power. Logic provided on the board will detect errors in the PHY. An FPGA (field-programmable gate array) with embedded Ethernet MAC (Media Access Control) will work well. The error detection includes monitoring the PHY's interrupt line, and the status of the Ethernet's switched power. When the PHY is determined to be non-functional, the logic device resets the PHY, which will often clear radiation induced errors. If this doesn't work, the logic device power-cycles the FPGA by toggling the regulator's enable input. This should clear almost all radiation induced errors provided the device is not latched up.

Effects of supplemental training on fitness and aesthetic competence parameters in contemporary dance: a randomised controlled trial.

PubMed

Angioi, Manuela; Metsios, George; Twitchett, Emily A; Koutedakis, Yiannis; Wyon, Matthew

2012-03-01

Within aesthetic sports such as figure skating and rhythmic gymnastics, physical fitness has been shown to have positive benefits on performance outcomes. Presently the link between physical fitness and aesthetic contemporary dance performance has not been demonstrated within an intervention study. In this study, 24 females engaged in contemporary dance (age 27 ± 5.9 yrs; height 165.3 ± 4.8 cm; weight 59.2 ± 7.6 kg) were recruited and randomly assigned to either an exercise (n = 12) or a control group (n = 12). Three dancers withdrew during the study. The intervention group completed a 6-week conditioning programme comprising two 1-hr sessions of circuit and vibration training per week. The circuit training focused on local muscular endurance and aerobic conditioning and vibration training protocol concentrated on power. Repeated measures ANOVA revealed significant increases for the conditioning group in lower body muscular power (11%), upper body muscular endurance (22%), aerobic fitness (11%), and aesthetic competence (12%) (p < 0.05). The control group reported decreases in all the fitness parameters with the exception of aerobic fitness as well as a decrease in aesthetic competence (7%). A 6-week circuit and vibration training programme, which supplemented normal dance commitments, revealed significant increases in selected fitness components and a concomitant increase in aesthetic competence in contemporary professional and student dancers.

Fabrication of miniature elastomer lenses with programmable liquid mold for smartphone microscopy: curing polydimethylsiloxane with in situ curvature control.

PubMed

Karunakaran, Bhuvaneshwari; Tharion, Joseph; Dhawangale, Arvind Ramrao; Paul, Debjani; Mukherji, Soumyo

2018-02-01

Miniature lenses can transform commercial imaging systems, e.g., smartphones and webcams, into powerful, low-cost, handheld microscopes. To date, the reproducible fabrication of polymer lenses is still a challenge as they require controlled dispensing of viscous liquid. This paper reports a reproducible lens fabrication technique using liquid mold with programmable curvature and off-the-shelf materials. The lens curvature is controlled during fabrication by tuning the curvature of an interface of two immiscible liquids [polydimethylsiloxane (PDMS) and glycerol]. The curvature control is implemented using a visual feedback system, which includes a software-based guiding system to produce lenses of desired curvature. The technique allows PDMS lens fabrication of a wide range of sizes and focal lengths, within 20 min. The fabrication of two lens diameters: 1 and 5 mm with focal lengths ranging between 1.2 and 11 mm are demonstrated. The lens surface and bulk quality check performed using X-ray microtomography and atomic force microscopy reveal that the lenses are suitable for optical imaging. Furthermore, a smartphone microscope with ∼1.4-μm resolution is developed using a self-assembly of a single high power fabricated lens and microaperture. The lenses have various potential applications, e.g., optofluidics, diagnostics, forensics, and surveillance. (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

NASA Tech Briefs, October 2011

NASA Technical Reports Server (NTRS)

2011-01-01

Topics covered include: Laser Truss Sensor for Segmented Telescope Phasing; Qualifications of Bonding Process of Temperature Sensors to Deep-Space Missions; Optical Sensors for Monitoring Gamma and Neutron Radiation; Compliant Tactile Sensors; Cytometer on a Chip; Measuring Input Thresholds on an Existing Board; Scanning and Defocusing Properties of Microstrip Reflectarray Antennas; Cable Tester Box; Programmable Oscillator; Fault-Tolerant, Radiation-Hard DSP; Sub-Shot Noise Power Source for Microelectronics; Asynchronous Message Service Reference Implementation; Zero-Copy Objects System; Delay and Disruption Tolerant Networking MACHETE Model; Contact Graph Routing; Parallel Eclipse Project Checkout; Technique for Configuring an Actively Cooled Thermal Shield in a Flight System; Use of Additives to Improve Performance of Methyl Butyrate-Based Lithium-Ion Electrolytes; Li-Ion Cells Employing Electrolytes with Methyl Propionate and Ethyl Butyrate Co-Solvents; Improved Devices for Collecting Sweat for Chemical Analysis; Tissue Photolithography; Method for Impeding Degradation of Porous Silicon Structures; External Cooling Coupled to Reduced Extremity Pressure Device; A Zero-Gravity Cup for Drinking Beverages in Microgravity; Co-Flow Hollow Cathode Technology; Programmable Aperture with MEMS Microshutter Arrays; Polished Panel Optical Receiver for Simultaneous RF/Optical Telemetry with Large DSN Antennas; Adaptive System Modeling for Spacecraft Simulation; Lidar-Based Navigation Algorithm for Safe Lunar Landing; Tracking Object Existence From an Autonomous Patrol Vehicle; Rad-Hard, Miniaturized, Scalable, High-Voltage Switching Module for Power Applications; and Architecture for a 1-GHz Digital RADAR.

Study of heterogeneous and reconfigurable architectures in the communication domain

NASA Astrophysics Data System (ADS)

Feldkaemper, H. T.; Blume, H.; Noll, T. G.

2003-05-01

One of the most challenging design issues for next generations of (mobile) communication systems is fulfilling the computational demands while finding an appropriate trade-off between flexibility and implementation aspects, especially power consumption. Flexibility of modern architectures is desirable, e.g. concerning adaptation to new standards and reduction of time-to-market of a new product. Typical target architectures for future communication systems include embedded FPGAs, dedicated macros as well as programmable digital signal and control oriented processor cores as each of these has its specific advantages. These will be integrated as a System-on-Chip (SoC). For such a heterogeneous architecture a design space exploration and an appropriate partitioning plays a crucial role. On the exemplary vehicle of a Viterbi decoder as frequently used in communication systems we show which costs in terms of ATE complexity arise implementing typical components on different types of architecture blocks. A factor of about seven orders of magnitude spans between a physically optimised implementation and an implementation on a programmable DSP kernel. An implementation on an embedded FPGA kernel is in between these two representing an attractive compromise with high flexibility and low power consumption. Extending this comparison to further components, it is shown quantitatively that the cost ratio between different implementation alternatives is closely related to the operation to be performed. This information is essential for the appropriate partitioning of heterogeneous systems.

Synthesizing parallel imaging applications using the CAP (computer-aided parallelization) tool

NASA Astrophysics Data System (ADS)

Gennart, Benoit A.; Mazzariol, Marc; Messerli, Vincent; Hersch, Roger D.

1997-12-01

Imaging applications such as filtering, image transforms and compression/decompression require vast amounts of computing power when applied to large data sets. These applications would potentially benefit from the use of parallel processing. However, dedicated parallel computers are expensive and their processing power per node lags behind that of the most recent commodity components. Furthermore, developing parallel applications remains a difficult task: writing and debugging the application is difficult (deadlocks), programs may not be portable from one parallel architecture to the other, and performance often comes short of expectations. In order to facilitate the development of parallel applications, we propose the CAP computer-aided parallelization tool which enables application programmers to specify at a high-level of abstraction the flow of data between pipelined-parallel operations. In addition, the CAP tool supports the programmer in developing parallel imaging and storage operations. CAP enables combining efficiently parallel storage access routines and image processing sequential operations. This paper shows how processing and I/O intensive imaging applications must be implemented to take advantage of parallelism and pipelining between data access and processing. This paper's contribution is (1) to show how such implementations can be compactly specified in CAP, and (2) to demonstrate that CAP specified applications achieve the performance of custom parallel code. The paper analyzes theoretically the performance of CAP specified applications and demonstrates the accuracy of the theoretical analysis through experimental measurements.

Enhanced Control for Local Helicity Injection on the Pegasus ST

NASA Astrophysics Data System (ADS)

Pierren, C.; Bongard, M. W.; Fonck, R. J.; Lewicki, B. T.; Perry, J. M.

2017-10-01

Local helicity injection (LHI) experiments on Pegasus rely upon programmable control of a 250 MVA modular power supply system that drives the electromagnets and helicity injection systems. Precise control of the central solenoid is critical to experimental campaigns that test the LHI Taylor relaxation limit and the coupling efficiency of LHI-produced plasmas to Ohmic current drive. Enhancement and expansion of the present control system is underway using field programmable gate array (FPGA) technology for digital logic and control, coupled to new 10 MHz optical-to-digital transceivers for semiconductor level device communication. The system accepts optical command signals from existing analog feedback controllers, transmits them to multiple devices in parallel H-bridges, and aggregates their status signals for fault detection. Present device-level multiplexing/de-multiplexing and protection logic is extended to include bridge-level protections with the FPGA. An input command filter protects against erroneous and/or spurious noise generated commands that could otherwise cause device failures. Fault registration and response times with the FPGA system are 25 ns. Initial system testing indicates an increased immunity to power supply induced noise, enabling plasma operations at higher working capacitor bank voltage. This can increase the applied helicity injection drive voltage, enable longer pulse lengths and improve Ohmic loop voltage control. Work supported by US DOE Grant DE-FG02-96ER54375.

The European Union Food Distribution programme for the Most Deprived Persons of the community, 1987-2013: From agricultural policy to social inclusion policy?

PubMed

Caraher, Martin

2015-07-01

The European Union Food Distribution programme for the Most Deprived Persons (MDP) of the community ran from 1987 until 2013. It was funded from Common Agricultural Policy budgets. The programme initially made use of surplus foods from the food mountains resulting from intervention stocks. This food was then distributed through aid agencies within member states, coordinated at a national government level. Reform of the CAP and global rises in food prices resulted in an increase in budget from €300 to €500 million Euros in 2010 with the added power to buy food on the open market. This led to a formal challenge to the scheme on the basis that buying goods on the open market shifted the emphasis from an agricultural/financial basis to a social one. A court ruling found that because the program was no longer used for removing surpluses the link to agriculture policy has become tenuous and therefore had no basis in community law. As a result of this legal challenge a number of policy compromises ensured the MDP would continue until the end of 2013 with a reduced budget. The scheme has been superseded by a new scheme in March 2014 called the Fund for European Aid to the Most Deprived (FEAD). This is seen as a social programme. The way that policy and politics developed and changed the MDP programme are set out. The article tracks its move from being an agricultural policy to a social welfare one. The key policy players and actors in this move are set out as are the changing context and policy frameworks. The replacement of the MDP by FEAD is discussed as is how intensive lobbying in 2012/13 resulted in the development of a new Fund for European Aid to the Most Deprived (FEAD). Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Empty rituals? A qualitative study of users' experience of monitoring & evaluation systems in HIV interventions in western India.

PubMed

Shukla, Anuprita; Teedon, Paul; Cornish, Flora

2016-11-01

In global health initiatives, particularly in the context of private philanthropy and its 'business minded' approach, detailed programme data plays an increasing role in informing assessments, improvements, evaluations, and ultimately continuation or discontinuation of funds for individual programmes. The HIV/AIDS literature predominantly treats monitoring as unproblematic. However, the social science of audit and indicators emphasises the constitutive power of indicators, noting that their effects at a grassroots level are often at odds with the goals specified in policy. This paper investigates users' experiences of Monitoring and Evaluation (M&E) systems in the context of HIV interventions in western India. Six focus groups (totalling 51 participants) were held with employees of 6 different NGOs working for government or philanthropy-funded HIV interventions for sex workers in western India. Ten donor employees were interviewed. Thematic analysis was conducted. NGO employees described a major gap between what they considered their "real work" and the indicators used to monitor it. They could explain the official purposes of M&E systems in terms of programme improvement and financial accountability. More cynically, they valued M&E experience on their CVs and the rhetorical role of data in demonstrating their achievements. They believed that inappropriate and unethical means were being used to meet targets, including incentives and coercion, and criticised indicators for being misleading and inflexible. Donor employees valued the role of M&E in programme improvement, financial accountability, and professionalising NGO-donor relationships. However, they were suspicious that NGOs might be falsifying data, criticised the insensitivity of indicators, and complained that data were under-used. For its users, M& E appears an 'empty ritual', enacted because donors require it, but not put to local use. In this context, monitoring is constituted as an instrument of performance management rather than as a means of rational programme improvement. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Enabling Near Real-Time Remote Search for Fast Transient Events with Lossy Data Compression

NASA Astrophysics Data System (ADS)

Vohl, Dany; Pritchard, Tyler; Andreoni, Igor; Cooke, Jeffrey; Meade, Bernard

2017-09-01

We present a systematic evaluation of JPEG2000 (ISO/IEC 15444) as a transport data format to enable rapid remote searches for fast transient events as part of the Deeper Wider Faster programme. Deeper Wider Faster programme uses 20 telescopes from radio to gamma rays to perform simultaneous and rapid-response follow-up searches for fast transient events on millisecond-to-hours timescales. Deeper Wider Faster programme search demands have a set of constraints that is becoming common amongst large collaborations. Here, we focus on the rapid optical data component of Deeper Wider Faster programme led by the Dark Energy Camera at Cerro Tololo Inter-American Observatory. Each Dark Energy Camera image has 70 total coupled-charged devices saved as a 1.2 gigabyte FITS file. Near real-time data processing and fast transient candidate identifications-in minutes for rapid follow-up triggers on other telescopes-requires computational power exceeding what is currently available on-site at Cerro Tololo Inter-American Observatory. In this context, data files need to be transmitted rapidly to a foreign location for supercomputing post-processing, source finding, visualisation and analysis. This step in the search process poses a major bottleneck, and reducing the data size helps accommodate faster data transmission. To maximise our gain in transfer time and still achieve our science goals, we opt for lossy data compression-keeping in mind that raw data is archived and can be evaluated at a later time. We evaluate how lossy JPEG2000 compression affects the process of finding transients, and find only a negligible effect for compression ratios up to 25:1. We also find a linear relation between compression ratio and the mean estimated data transmission speed-up factor. Adding highly customised compression and decompression steps to the science pipeline considerably reduces the transmission time-validating its introduction to the Deeper Wider Faster programme science pipeline and enabling science that was otherwise too difficult with current technology.

Conceptualisation of knowledge construction in community service-learning programmes in nursing education.

PubMed

Mthembu, Sindi Z; Mtshali, Fikile G

2013-01-01

Practices in higher education have been criticised for not developing and preparing students for the expertise required in real environments. Literature reports that educational programmes tend to favour knowledge conformation rather than knowledge construction; however, community service learning (CSL) is a powerful pedagogical strategy that encourages students to make meaningful connections between the content in the classroom and real-life experiences as manifested by the communities. Through CSL, learning is achieved by the active construction of knowledge supported by multiple perspectives within meaningful real contexts, and the social interactions amongst students are seen to play a critical role in the processes of learning and cognition. This article reflects facilitators’ perspective of the knowledge construction process as used with students doing community service learning in basic nursing programmes. The aim of this article was to conceptualise the phenomenon of knowledge construction and thereby provide educators with a shared meaning and common understanding, and to analyse the interaction strategies utilised by nurse educators in the process of knowledge construction in community service-learning programmes in basic nursing education. A qualitative research approach based on a grounded theory research design was used in this article. Two nursing education institutions were purposively selected. Structured interviews were conducted with 16 participants. The results revealed that the knowledge construction in community service-learning programmes is conceptualised as having specific determinants, including the use of authentic health-related problems, academic coaching through scaffolding, academic discourse-dialogue, interactive learning in communities of learners, active learning, continuous reflection as well as collaborative and inquiry-based learning. Upon completion of an experience, students create and test generated knowledge in different contextual health settings. It was concluded that knowledge is constructed by students as a result of their interaction with the communities in their socio-cultural context and is mediated by their prior concrete experiences. The implication of this is that students construct knowledge that can be applied in their future work places.

Work as treatment? The effectiveness of re-employment programmes for unemployed persons with severe mental health problems on health and quality of life: a systematic review and meta-analysis.

PubMed

van Rijn, Rogier M; Carlier, Bouwine E; Schuring, Merel; Burdorf, Alex

2016-04-01

Given the importance of unemployment in health inequalities, re-employment of unemployed persons into paid employment may be a powerful intervention to increase population health. It is suggested that integrated programmes of vocational reintegration with health promotion may improve the likelihood of entering paid employment of long-term unemployed persons with severe mental health problems. However, the current evidence regarding whether entering paid employment of this population will contribute to a reduction in health problems remains unambiguous. This systematic review and meta-analysis aimed to assess the effects of re-employment programmes with regard to health and quality of life. Three electronic databases were searched (up to March 2015). Two reviewers independently selected articles and assessed the risk of bias on prespecified criteria. Measures of effects were pooled and random effect meta-analysis of randomised controlled trials was conducted, where possible. Sixteen studies were included. Nine studies described functioning as an outcome measure. Five studies with six comparisons provided enough information to calculate a pooled effect size of -0.01 (95% CI -0.13 to 0.11). Fifteen studies presented mental health as an outcome measure of which six with comparable psychiatric symptoms resulted in a pooled effect size of 0.20 (95% CI -0.23 to 0.62). Thirteen studies described quality of life as an outcome measure. Seven of these studies, describing eight comparisons, provided enough information to calculate a pooled effect size of 0.28 (95% CI 0.04 to 0.52). Re-employment programmes have a modest positive effect on the quality of life. No evidence was found for any effect of these re-employment programmes on functioning and mental health. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Mobile high-performance computing (HPC) for synthetic aperture radar signal processing

NASA Astrophysics Data System (ADS)

Misko, Joshua; Kim, Youngsoo; Qi, Chenchen; Sirkeci, Birsen

2018-04-01

The importance of mobile high-performance computing has emerged in numerous battlespace applications at the tactical edge in hostile environments. Energy efficient computing power is a key enabler for diverse areas ranging from real-time big data analytics and atmospheric science to network science. However, the design of tactical mobile data centers is dominated by power, thermal, and physical constraints. Presently, it is very unlikely to achieve required computing processing power by aggregating emerging heterogeneous many-core processing platforms consisting of CPU, Field Programmable Gate Arrays and Graphic Processor cores constrained by power and performance. To address these challenges, we performed a Synthetic Aperture Radar case study for Automatic Target Recognition (ATR) using Deep Neural Networks (DNNs). However, these DNN models are typically trained using GPUs with gigabytes of external memories and massively used 32-bit floating point operations. As a result, DNNs do not run efficiently on hardware appropriate for low power or mobile applications. To address this limitation, we proposed for compressing DNN models for ATR suited to deployment on resource constrained hardware. This proposed compression framework utilizes promising DNN compression techniques including pruning and weight quantization while also focusing on processor features common to modern low-power devices. Following this methodology as a guideline produced a DNN for ATR tuned to maximize classification throughput, minimize power consumption, and minimize memory footprint on a low-power device.

Global action to prevent war: a programme for government and grassroots efforts to stop war, genocide and other forms of deadly conflict.

PubMed

Dean, J; Forsberg, R C; Mendlovitz, S

2000-01-01

At the end of history's bloodiest century and the outset of a new millennium, we have an opportunity to fulfil one of humanity's oldest dreams: making the world largely free of war. Global changes make this goal achievable. Nuclear weapons have shown the folly of war. For the first time, there is no war and no immediate prospect of war among the main military powers. For the first time, many proven measures to prevent armed conflict, distilled in the crucible of this century's wars, are available. If systematically applied, these measures can sharply decrease the frequency and violence of war, genocide, and other forms of deadly conflict. To seize the opportunity, nations should adopt a comprehensive programme to reduce conventional armaments and armed conflict. This programme will complement and strengthen efforts to eliminate nuclear arms. To assure its ongoing worldwide implementation, the conventional reduction programme should be placed in a treaty framework. We propose a four-phased process, with three treaties, each lasting five to ten years, to lay the groundwork for the fourth treaty, which will establish a permanent international security system. The main objectives of the treaties are to achieve: 1. A verified commitment to provide full transparency on conventional armed forces and military spending, not to increase forces during negotiations on arms reductions, and to increase the resources allocated to multilateral conflict prevention and peacekeeping. 2. Substantial worldwide cuts in national armed forces and military spending and further strengthening of United Nations and regional peacekeeping and peace-enforcement capabilities. 3. A trial of a watershed commitment by participating nations, including the major powers, not to deploy their armed forces beyond national borders except in a multilateral action under UN or regional auspices. 4. A permanent transfer to the UN and regional security organizations of the authority and capability for armed intervention to prevent or end war, accompanied by further substantial cuts in national armed forces and increases in UN and regional forces. This programme offers many valuable features: a global framework for conventional forces that parallels the nuclear Non-Proliferation Treaty; a verified no-increase commitment for national armed forces based on full data exchange; a commitment to undertake prescribed confidence-building measures, including limits on force activities and deployments; a commitment to a specified plan for increased funding of UN and regional peacekeeping capabilities; a commitment to strengthen international legal institutions; and after a trial period, a lasting commitment by each participant not to unilaterally deploy its armed forces beyond its borders, but instead to give the responsibility for peacekeeping and peace enforcement to international institutions. This programme of phased steps to reduce armed forces and strengthen peacekeeping institutions will make war rare. It will foster the spread of zones of peace like those in North America and Western Europe where, after centuries of violence, international and civil war have given way to the peaceful settlement of disputes.

Experience of 12 kA / 16 V SMPS during the HTS Current Leads Test

NASA Astrophysics Data System (ADS)

Panchal, P.; Christian, D.; Panchal, R.; Sonara, D.; Purwar, G.; Garg, A.; Nimavat, H.; Singh, G.; Patel, J.; Tanna, V.; Pradhan, S.

2017-04-01

As a part of up gradation plans in SST-1 Tokamak, one pair of 3.3 kA rated prototype hybrid current leads were developed using Di-BSCCO as High Temperature Superconductors (HTS) and the copper heat exchanger. In order to validate the manufacturing procedure prior to go for series production of such current leads, it was recommended to test these current leads using dedicated and very reliable DC switch mode power supply (SMPS). As part of test facility, 12 kA, 16 VDC programmable SMPS was successfully installed, commissioned and tested. This power supply has special features such as modularity, N+1 redundancy, very low ripple voltage, precise current measurements with Direct Current Current Transformer, CC/CV modes with auto-crossover and auto-sequence programming. As a part of acceptance of this converter, A 5.8 mΩ water-cooled resistive dummy load and PLC based SCADA system is designed, developed for commissioning of power supply. The same power supply was used for the testing of the prototype HTS current leads. The paper describes the salient features and experience of state-of-art of power supply and results obtained from this converter during the HTS current leads test.

A Survey on FPGA-Based Sensor Systems: Towards Intelligent and Reconfigurable Low-Power Sensors for Computer Vision, Control and Signal Processing

PubMed Central

García, Gabriel J.; Jara, Carlos A.; Pomares, Jorge; Alabdo, Aiman; Poggi, Lucas M.; Torres, Fernando

2014-01-01

The current trend in the evolution of sensor systems seeks ways to provide more accuracy and resolution, while at the same time decreasing the size and power consumption. The use of Field Programmable Gate Arrays (FPGAs) provides specific reprogrammable hardware technology that can be properly exploited to obtain a reconfigurable sensor system. This adaptation capability enables the implementation of complex applications using the partial reconfigurability at a very low-power consumption. For highly demanding tasks FPGAs have been favored due to the high efficiency provided by their architectural flexibility (parallelism, on-chip memory, etc.), reconfigurability and superb performance in the development of algorithms. FPGAs have improved the performance of sensor systems and have triggered a clear increase in their use in new fields of application. A new generation of smarter, reconfigurable and lower power consumption sensors is being developed in Spain based on FPGAs. In this paper, a review of these developments is presented, describing as well the FPGA technologies employed by the different research groups and providing an overview of future research within this field. PMID:24691100

A survey on FPGA-based sensor systems: towards intelligent and reconfigurable low-power sensors for computer vision, control and signal processing.

PubMed

García, Gabriel J; Jara, Carlos A; Pomares, Jorge; Alabdo, Aiman; Poggi, Lucas M; Torres, Fernando

2014-03-31

The current trend in the evolution of sensor systems seeks ways to provide more accuracy and resolution, while at the same time decreasing the size and power consumption. The use of Field Programmable Gate Arrays (FPGAs) provides specific reprogrammable hardware technology that can be properly exploited to obtain a reconfigurable sensor system. This adaptation capability enables the implementation of complex applications using the partial reconfigurability at a very low-power consumption. For highly demanding tasks FPGAs have been favored due to the high efficiency provided by their architectural flexibility (parallelism, on-chip memory, etc.), reconfigurability and superb performance in the development of algorithms. FPGAs have improved the performance of sensor systems and have triggered a clear increase in their use in new fields of application. A new generation of smarter, reconfigurable and lower power consumption sensors is being developed in Spain based on FPGAs. In this paper, a review of these developments is presented, describing as well the FPGA technologies employed by the different research groups and providing an overview of future research within this field.

An Autonomous Wireless Sensor Node With Asynchronous ECG Monitoring in 0.18 μ m CMOS.

PubMed

Mansano, Andre L; Li, Yongjia; Bagga, Sumit; Serdijn, Wouter A

2016-06-01

The design of a 13.56 MHz/402 MHz autonomous wireless sensor node with asynchronous ECG monitoring for near field communication is presented. The sensor node consists of an RF energy harvester (RFEH), a power management unit, an ECG readout, a data encoder and an RF backscattering transmitter. The energy harvester supplies the system with 1.25 V and offers a power conversion efficiency of 19% from a -13 dBm RF source at 13.56 MHz. The power management unit regulates the output voltage of the RFEH to supply the ECG readout with VECG = 0.95 V and the data encoder with VDE = 0.65 V . The ECG readout comprises an analog front-end (low noise amplifier and programmable voltage to current converter) and an asynchronous level crossing ADC with 8 bits resolution. The ADC output is encoded by a pulse generator that drives a backscattering transmitter at 402 MHz. The total power consumption of the sensor node circuitry is 9.7 μ W for a data rate of 90 kb/s and a heart rate of 70 bpm. The chip has been designed in a 0.18 μm CMOS process and shows superior RF input power sensitivity and lower power consumption when compared to previous works.

EDITORIAL: Safety aspects of fusion power plants

NASA Astrophysics Data System (ADS)

Kolbasov, B. N.

2007-07-01

This special issue of Nuclear Fusion contains 13 informative papers that were initially presented at the 8th IAEA Technical Meeting on Fusion Power Plant Safety held in Vienna, Austria, 10-13 July 2006. Following recommendation from the International Fusion Research Council, the IAEA organizes Technical Meetings on Fusion Safety with the aim to bring together experts to discuss the ongoing work, share new ideas and outline general guidance and recommendations on different issues related to safety and environmental (S&E) aspects of fusion research and power facilities. Previous meetings in this series were held in Vienna, Austria (1980), Ispra, Italy (1983), Culham, UK (1986), Jackson Hole, USA (1989), Toronto, Canada (1993), Naka, Japan (1996) and Cannes, France (2000). The recognized progress in fusion research and technology over the last quarter of a century has boosted the awareness of the potential of fusion to be a practically inexhaustible and clean source of energy. The decision to construct the International Thermonuclear Experimental Reactor (ITER) represents a landmark in the path to fusion power engineering. Ongoing activities to license ITER in France look for an adequate balance between technological and scientific deliverables and complying with safety requirements. Actually, this is the first instance of licensing a representative fusion machine, and it will very likely shape the way in which a more common basis for establishing safety standards and policies for licensing future fusion power plants will be developed. Now that ITER licensing activities are underway, it is becoming clear that the international fusion community should strengthen its efforts in the area of designing the next generations of fusion power plants—demonstrational and commercial. Therefore, the 8th IAEA Technical Meeting on Fusion Safety focused on the safety aspects of power facilities. Some ITER-related safety issues were reported and discussed owing to their potential importance for the fusion power plant research programmes. The objective of this Technical Meeting was to examine in an integrated way all the safety aspects anticipated to be relevant to the first fusion power plant prototype expected to become operational by the middle of the century, leading to the first generation of economically viable fusion power plants with attractive S&E features. After screening by guest editors and consideration by referees, 13 (out of 28) papers were accepted for publication. They are devoted to the following safety topics: power plant safety; fusion specific operational safety approaches; test blanket modules; accident analysis; tritium safety and inventories; decommissioning and waste. The paper `Main safety issues at the transition from ITER to fusion power plants' by W. Gulden et al (EU) highlights the differences between ITER and future fusion power plants with magnetic confinement (off-site dose acceptance criteria, consequences of accidents inside and outside the design basis, occupational radiation exposure, and waste management, including recycling and/or final disposal in repositories) on the basis of the most recent European fusion power plant conceptual study. Ongoing S&E studies within the US inertial fusion energy (IFE) community are focusing on two design concepts. These are the high average power laser (HAPL) programme for development of a dry-wall, laser-driven IFE power plant, and the Z-pinch IFE programme for the production of an economically-attractive power plant using high-yield Z-pinch-driven targets. The main safety issues related to these programmes are reviewed in the paper `Status of IFE safety and environmental activities in the US' by S. Reyes et al (USA). The authors propose future directions of research in the IFE S&E area. In the paper `Recent accomplishments and future directions in the US Fusion Safety & Environmental Program' D. Petti et al (USA) state that the US fusion programme has long recognized that the S&E potential of fusion can be attained by prudent materials selection, judicious design choices, and integration of safety requirements into the design of the facility. To achieve this goal, S&E research is focused on understanding the behaviour of the largest sources of radioactive and hazardous materials in a fusion facility, understanding how energy sources in a fusion facility could mobilize those materials, developing integrated state-of-the-art S&E computer codes and risk tools for safety assessment, and evaluating and improving fusion facility design in terms of accident safety, worker safety, and waste disposal. There are three papers considering safety issues of the test blanket modules (TBM) producing tritium to be installed in ITER. These modules represent different concepts of demonstration fusion power facilities (DEMO). L. Boccaccini et al (Germany) analyses the possibility of jeopardizing the ITER safety under specific accidents in the European helium-cooled pebble-bed TBM, e.g. pressurization of the vacuum vessel (VV), hydrogen production from the Be-steam reaction, the possible interconnection between the port cell and VV causing air ingress. Safety analysis is also presented for Chinese TBM with a helium-cooled solid breeder to be tested in ITER by Z. Chen et al (China). Radiological inventories, afterheat, waste disposal ratings, electromagnetic characteristics, LOCA and tritium safety management are considered. An overview of a preliminary safety analysis performed for a US proposed TBM is presented by B. Merrill et al (USA). This DEMO relevant dual coolant liquid lead-lithium TBM has been explored both in the USA and EU. T. Pinna et al (Italy) summarize the six-year development of a failure rate database for fusion specific components on the basis of data coming from operating experience gained in various fusion laboratories. The activity began in 2001 with the study of the Joint European Torus vacuum and active gas handling systems. Two years later the neutral beam injectors and the power supply systems were considered. This year the ion cyclotron resonant heating system is under evaluation. I. Cristescu et al (Germany) present the paper `Tritium inventories and tritium safety design principles for the fuel cycle of ITER'. She and her colleagues developed the dynamic mathematical model (TRIMO) for tritium inventory evaluation within each system of the ITER fuel cycle in various operational scenarios. TRIMO is used as a tool for trade-off studies within the fuel cycle systems with the final goal of global tritium inventory minimization. M. Matsuyama et al (Japan) describes a new technique for in situ quantitative measurements of high-level tritium inventory and its distribution in the VV and tritium systems of ITER and future fusion reactors. This technique is based on utilization of x-rays induced by beta-rays emitting from tritium species. It was applied to three physical states of high-level tritium: to gaseous, aqueous and solid tritium retained on/in various materials. Finally, there are four papers devoted to safety issues in fusion reactor decommissioning and waste management. A paper by R. Pampin et al (UK) provides the revised radioactive waste analysis of two models in the PPCS. Another paper by M. Zucchetti (Italy), S.A. Bartenev (Russia) et al describes a radiochemical extraction technology for purification of V-Cr-Ti alloy components from activation products to the dose rate of 10 µSv/h allowing their clearance or hands-on recycling which has been developed and tested in laboratory stationary conditions. L. El-Guebaly (USA) and her colleagues submitted two papers. In the first paper she optimistically considers the possibility of replacing the disposal of fusion power reactor waste with recycling and clearance. Her second paper considers the implications of new clearance guidelines for nuclear applications, particularly for slightly irradiated fusion materials.

Master/Programmable-Slave Computer

NASA Technical Reports Server (NTRS)

Smaistrla, David; Hall, William A.

1990-01-01

Unique modular computer features compactness, low power, mass storage of data, multiprocessing, and choice of various input/output modes. Master processor communicates with user via usual keyboard and video display terminal. Coordinates operations of as many as 24 slave processors, each dedicated to different experiment. Each slave circuit card includes slave microprocessor and assortment of input/output circuits for communication with external equipment, with master processor, and with other slave processors. Adaptable to industrial process control with selectable degrees of automatic control, automatic and/or manual monitoring, and manual intervention.

Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program.

PubMed

Afouxenidis, D; Polymeris, G S; Tsirliganis, N C; Kitis, G

2012-05-01

This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the GLOw Curve ANalysis INtercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters.

Programmable Iterative Optical Image And Data Processing

NASA Technical Reports Server (NTRS)

Jackson, Deborah J.

1995-01-01

Proposed method of iterative optical image and data processing overcomes limitations imposed by loss of optical power after repeated passes through many optical elements - especially, beam splitters. Involves selective, timed combination of optical wavefront phase conjugation and amplification to regenerate images in real time to compensate for losses in optical iteration loops; timing such that amplification turned on to regenerate desired image, then turned off so as not to regenerate other, undesired images or spurious light propagating through loops from unwanted reflections.

An Electro-Optic Spatial Light Modulator for Thermoelastic Generation of Programmably Focused Ultrasound.

DTIC Science & Technology

1984-12-01

The concept proposed is an electro - optic technique that would make it possible to spatially modulate a high power pulsed laser beam to thermoelastically induce focused ultrasound in a test material. Being a purely electro - optic device, the modulator, and therefore the depth at which the acoustic focus occurs, can be programmed electronically at electronic speeds. If successful, it would become possible to scan ultrasound continuously in three dimensions within the component or structure under test. (Author)

Fly-By-Light/Power-By-Wire Fault-Tolerant Fiber-Optic Backplane

NASA Technical Reports Server (NTRS)

Malekpour, Mahyar R.

2002-01-01

The design and development of a fault-tolerant fiber-optic backplane to demonstrate feasibility of such architecture is presented. The simulation results of test cases on the backplane in the advent of induced faults are presented, and the fault recovery capability of the architecture is demonstrated. The architecture was designed, developed, and implemented using the Very High Speed Integrated Circuits (VHSIC) Hardware Description Language (VHDL). The architecture was synthesized and implemented in hardware using Field Programmable Gate Arrays (FPGA) on multiple prototype boards.

Parallel algorithm for computation of second-order sequential best rotations

NASA Astrophysics Data System (ADS)

Redif, Soydan; Kasap, Server

2013-12-01

Algorithms for computing an approximate polynomial matrix eigenvalue decomposition of para-Hermitian systems have emerged as a powerful, generic signal processing tool. A technique that has shown much success in this regard is the sequential best rotation (SBR2) algorithm. Proposed is a scheme for parallelising SBR2 with a view to exploiting the modern architectural features and inherent parallelism of field-programmable gate array (FPGA) technology. Experiments show that the proposed scheme can achieve low execution times while requiring minimal FPGA resources.

Modeling of SONOS Memory Cell Erase Cycle

NASA Technical Reports Server (NTRS)

Phillips, Thomas A.; MacLeod, Todd C.; Ho, Fat H.

2011-01-01

Utilization of Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) nonvolatile semiconductor memories as a flash memory has many advantages. These electrically erasable programmable read-only memories (EEPROMs) utilize low programming voltages, have a high erase/write cycle lifetime, are radiation hardened, and are compatible with high-density scaled CMOS for low power, portable electronics. In this paper, the SONOS memory cell erase cycle was investigated using a nonquasi-static (NQS) MOSFET model. Comparisons were made between the model predictions and experimental data.

Programmable Digital Controller

NASA Technical Reports Server (NTRS)

Wassick, Gregory J.

2012-01-01

An existing three-channel analog servo loop controller has been redesigned for piezoelectric-transducer-based (PZT-based) etalon control applications to a digital servo loop controller. This change offers several improvements over the previous analog controller, including software control over proportional-integral-derivative (PID) parameters, inclusion of other data of interest such as temperature and pressure in the control laws, improved ability to compensate for PZT hysteresis and mechanical mount fluctuations, ability to provide pre-programmed scanning and stepping routines, improved user interface, expanded data acquisition, and reduced size, weight, and power.

MADNESS: A Multiresolution, Adaptive Numerical Environment for Scientific Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, Robert J.; Beylkin, Gregory; Bischoff, Florian A.

2016-01-01

MADNESS (multiresolution adaptive numerical environment for scientific simulation) is a high-level software environment for solving integral and differential equations in many dimensions that uses adaptive and fast harmonic analysis methods with guaranteed precision based on multiresolution analysis and separated representations. Underpinning the numerical capabilities is a powerful petascale parallel programming environment that aims to increase both programmer productivity and code scalability. This paper describes the features and capabilities of MADNESS and briefly discusses some current applications in chemistry and several areas of physics.

Report on a Cooperative Programme on Active Flutter Suppression,

DTIC Science & Technology

1980-08-01

soufflerie 16 pieds au frilon de is NASA A Langley Field. La maquette et les essais 6taient sous la responsabilitg de is firma Northrop (Fig. 1). Du c...ATLANTIC TREATY ORGANIZATION ADVISORY GROUP FOR AEROSPACE RESEARCH AND DEVELOPMENT (ORGANISATION DU TRAITE DE L’ATLANTIQUE NORD) A(ARI) Report No.689 REPORT...power unit was added to the console to provide for start/stop and bypass control of this unit from the wind tunnel control room. THE FLUTTER DETECTOR AND

An electro-optic spatial light modulator for thermoelastic generation of programmably focused ultrasound

NASA Astrophysics Data System (ADS)

1984-12-01

The concept proposed is an electro-optic technique that would make it possible to spatially modulate a high power pulsed laser beam to thermoelastically induce focused ultrasound in a test material. Being a purely electro-optic device, the modulator, and therefore the depth at which the acoustic focus occurs, can be programmed electronically at electronic speeds. If successful, it would become possible to scan ultrasound continuously in three dimensions within the component or structure under test.

Pulse generation and preamplification for long pulse beamlines of Orion laser facility.

PubMed

Hillier, David I; Winter, David N; Hopps, Nicholas W

2010-06-01

We describe the pulse generation, shaping, and preamplification system for the nanosecond beamlines of the Orion laser facility. The system generates shaped laser pulses of up to approximately 1 J of 100 ps-5 ns duration with a programmable temporal profile. The laser has a 30th-power supergaussian spatial profile and is diffraction limited. The system is capable of imposing 2D smoothing by spectral dispersion upon the beam, which will produce a nonuniformity of 10% rms at the target.

Radiation Tolerant, FPGA-Based SmallSat Computer System

NASA Technical Reports Server (NTRS)

LaMeres, Brock J.; Crum, Gary A.; Martinez, Andres; Petro, Andrew

2015-01-01

The Radiation Tolerant, FPGA-based SmallSat Computer System (RadSat) computing platform exploits a commercial off-the-shelf (COTS) Field Programmable Gate Array (FPGA) with real-time partial reconfiguration to provide increased performance, power efficiency and radiation tolerance at a fraction of the cost of existing radiation hardened computing solutions. This technology is ideal for small spacecraft that require state-of-the-art on-board processing in harsh radiation environments but where using radiation hardened processors is cost prohibitive.

Possible stimuli for strength and power adaptation : acute metabolic responses.

PubMed

Crewther, Blair; Cronin, John; Keogh, Justin

2006-01-01

The metabolic response to resistance exercise, in particular lactic acid or lactate, has a marked influence upon the muscular environment, which may enhance the training stimulus (e.g. motor unit activation, hormones or muscle damage) and thereby contribute to strength and power adaptation. Hypertrophy schemes have resulted in greater lactate responses (%) than neuronal and dynamic power schemes, suggesting possible metabolic-mediated changes in muscle growth. Factors such as age, sex, training experience and nutrition may also influence the lactate responses to resistance exercise and thereafter, muscular adaptation. Although the importance of the mechanical and hormonal stimulus to strength and power adaptation is well recognised, the contribution of the metabolic stimulus is largely unknown. Relatively few studies for example, have examined metabolic change across neuronal and dynamic power schemes, and not withstanding the fact that those mechanisms underpinning muscular adaptation, in relation to the metabolic stimulus, remain highly speculative. Inconsistent findings and methodological limitations within research (e.g. programme design, sampling period, number of samples) make interpretation further difficult. We contend that strength and power research needs to investigate those metabolic mechanisms likely to contribute to weight-training adaptation. Further research is also needed to examine the metabolic responses to different loading schemes, as well as interactions across age, sex and training status, so our understanding of how to optimise strength and power development is improved.

Life skills programmes for chronic mental illnesses

PubMed Central

Tungpunkom, Patraporn; Maayan, Nicola; Soares-Weiser, Karla

2014-01-01

Background Most people with schizophrenia have a cyclical pattern of illness characterised by remission and relapses. The illness can reduce the ability of self-care and functioning and can lead to the illness becoming disabling. Life skills programmes, emphasising the needs associated with independent functioning, are often a part of the rehabilitation process. These programmes have been developed to enhance independent living and quality of life for people with schizophrenia. Objectives To review the effects of life skills programmes compared with standard care or other comparable therapies for people with chronic mental health problems. Search methods We searched the Cochrane Schizophrenia Group Trials Register (June 2010). We supplemented this process with handsearching and scrutiny of references. We inspected references of all included studies for further trials. Selection criteria We included all relevant randomised or quasi-randomised controlled trials for life skills programmes versus other comparable therapies or standard care involving people with serious mental illnesses. Data collection and analysis We extracted data independently. For dichotomous data we calculated relative risks (RR) and their 95% confidence intervals (CI) on an intention-to-treat basis, based on a random-effects model. For continuous data, we calculated mean differences (MD), again based on a random-effects model. Main results We included seven randomised controlled trials with a total of 483 participants. These evaluated life skills programmes versus standard care, or support group. We found no significant difference in life skills performance between people given life skills training and standard care (1 RCT, n = 32, MD −1.10; 95% CI −7.82 to 5.62). Life skills training did not improve or worsen study retention (5 RCTs, n = 345, RR 1.16; 95% CI 0.40 to 3.36). We found no significant difference in PANSS positive, negative or total scores between life skills intervention and standard care. We found quality of life scores to be equivocal between participants given life skills training (1 RCT, n = 32, MD −0.02; 95% CI −0.07 to 0.03) and standard care. Life skills compared with support groups also did not reveal any significant differences in PANSS scores, quality of life, or social performance skills (1 RCT, n = 158, MD −0.90; 95% CI −3.39 to 1.59). Authors’ conclusions Currently there is no good evidence to suggest life skills programmes are effective for people with chronic mental illnesses. More robust data are needed from studies that are adequately powered to determine whether life skills training is beneficial for people with chronic mental health problems. PMID:22258941

The Case for Increased Physical Activity in Chronic Inflammatory Bowel Disease: A Brief Review.

PubMed

Shephard, R J

2016-06-01

Regular physical activity reduces the risk of colon cancer, but there is little information on the merits of such activity in the prevention and management of chronic inflammatory bowel disease (CIBD). The present systematic review thus documents current levels of habitual physical activity and aerobic and muscular function in CIBD, and examines the safety, practicality and efficacy of exercise programmes in countering the disease process, correcting functional deficits and enhancing quality of life. A systematic search of the Ovid/Medline database from January 1996 to May 2015 linked the terms physical activity/motor activity/physical fitness/physical training/physical education/training/exercise/exercise therapy with Crohn's disease/colitis/ulcerative colitis/inflammatory bowel disease, supplementing this information by a scanning of reference lists and personal files.12 of 16 published studies show a low level of habitual physical activity in CIBD, with sub-normal values for aerobic power, lean tissue mass and muscular strength. 3 of 4 studies suggest physical activity may reduce the risk of developing IBD, and 11 interventions all note that exercise programmes are well tolerated with some decreases of disease activity, and functional gains leading to an increased health-related quality of life. Moreover, programme compliance rates compare favourably with those seen in the treatment of other chronic conditions. More information on mechanisms is needed, but regular moderate aerobic and/or resistance exercise improves the health status of patients with CIBD both by modulating immune function and by improving physical function. A regular exercise programme should thus become an important component in the management of CIBD. © Georg Thieme Verlag KG Stuttgart · New York.

The use of rites of passage in strengthening the psychosocial wellbeing of orphaned children in Botswana.

PubMed

Thamuku, Masego; Daniel, Marguerite

2012-10-01

Children who have been bereaved in the context of AIDS may experience many challenges to their psychosocial wellbeing. Programmes to help orphaned children are usually anchored in child rights. As the individual focus of rights-based approaches is inept in African collectivist culture, NGOs tend to make use of group approaches in psychosocial support programmes. One orphan-strengthening programme in Botswana, called the Ark for Children, uses rites of passage and rites of affirmation as part of a therapeutic retreat. This study explored how rites of passage and rites of affirmation contribute to psychosocial strengthening of orphaned children in Botswana. Ten orphaned children were involved in five rounds of data collection during a 16-day therapeutic retreat; and eight social workers answered questions on the effectiveness of the therapy. A supplementary document analysis was also completed, which included retreat reports since 2001 and correspondence from community-based support workers and graduates of the programme. Participants reported that the rites used during the retreat helped them to commit to therapeutic transformation. During a retreat, all the participants witness and support each individual going through each rite - a process reported to foster and strengthen group formation. It was documented that the symbols used as part of the themed rites of affirmation are used by participants for years afterwards as reminders of their transformation and commitment to the group. We conclude that rites of passage can provide a powerful tool to help children commit to therapeutic transformation, build the supportive group, and enable the community to recognise and affirm that the children return as changed individuals and members of the group.