Government, politics and health policy: A quantitative analysis of 30 European countries.

PubMed

Mackenbach, Johan P; McKee, Martin

2015-10-01

Public health policies are often dependent on political decision-making, but little is known of the impact of different forms of government on countries' health policies. In this exploratory study we studied the association between a wide range of process and outcome indicators of health policy and four groups of political factors (levels of democracy, e.g. voice and accountability; political representation, e.g. voter turnout; distribution of power, e.g. constraints on the executive; and quality of government, e.g. absence of corruption) in contemporary Europe. Data on 15 aspects of government and 18 indicators of health policy as well as on potential confounders were extracted from harmonized international data sources, covering 30 European countries and the years 1990-2010. In a first step, multivariate regression analysis was used to relate cumulative measures of government to indicators of health policy, and in a second step panel regression with country fixed effects was used to relate changes in selected measures of government to changes in indicators of health policy. In multivariate regression analyses, measures of quality of democracy and quality of government had many positive associations with process and outcome indicators of health policy, while measures of distribution of power and political representation had few and inconsistent associations. Associations for quality of democracy were robust against more extensive control for confounding variables, including tests in panel regressions with country fixed effects, but associations for quality of government were not. In this period in Europe, the predominant political influence on health policy has been the rise of levels of democracy in countries in the Central & Eastern part of the region. In contrast to other areas of public policy, health policy does not appear to be strongly influenced by institutional features of democracy determining the distribution of power, nor by aspects of political representation. The effect of quality of government on health policy warrants more study. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Application of wireless power transmission systems in wireless capsule endoscopy: an overview.

PubMed

Basar, Md Rubel; Ahmad, Mohd Yazed; Cho, Jongman; Ibrahim, Fatimah

2014-06-19

Wireless capsule endoscopy (WCE) is a promising technology for direct diagnosis of the entire small bowel to detect lethal diseases, including cancer and obscure gastrointestinal bleeding (OGIB). To improve the quality of diagnosis, some vital specifications of WCE such as image resolution, frame rate and working time need to be improved. Additionally, future multi-functioning robotic capsule endoscopy (RCE) units may utilize advanced features such as active system control over capsule motion, drug delivery systems, semi-surgical tools and biopsy. However, the inclusion of the above advanced features demands additional power that make conventional power source methods impractical. In this regards, wireless power transmission (WPT) system has received attention among researchers to overcome this problem. Systematic reviews on techniques of using WPT for WCE are limited, especially when involving the recent technological advancements. This paper aims to fill that gap by providing a systematic review with emphasis on the aspects related to the amount of transmitted power, the power transmission efficiency, the system stability and patient safety. It is noted that, thus far the development of WPT system for this WCE application is still in initial stage and there is room for improvements, especially involving system efficiency, stability, and the patient safety aspects.

Helicopter roll control effectiveness criteria program summary

NASA Technical Reports Server (NTRS)

Heffley, Robert K.; Bourne, Simon M.; Mnich, Marc A.

1988-01-01

A study of helicopter roll control effectiveness is summarized for the purpose of defining military helicopter handling qualities requirements. The study is based on an analysis of pilot-in-the-loop task performance of several basic maneuvers. This is extended by a series of piloted simulations using the NASA Ames Vertical Motion Simulator and selected flight data. The main results cover roll control power and short-term response characteristics. In general the handling qualities requirements recommended are set in conjunction with desired levels of flight task and maneuver response which can be directly observed in actual flight. An important aspect of this, however, is that vehicle handling qualities need to be set with regard to some quantitative aspect of mission performance. Specific examples of how this can be accomplished include a lateral unmask/remask maneuver in the presence of a threat and an air tracking maneuver which recognizes the kill probability enhancement connected with decreasing the range to the target. Conclusions and recommendations address not only the handling qualities recommendations, but also the general use of flight simulators and the dependence of mission performance on handling qualities.

A simulation investigation of the effects of engine-and thrust-response characteristics on helicopter handling qualities

NASA Technical Reports Server (NTRS)

Corless, L. D.; Blanken, C. L.

1983-01-01

A multi-phase program is being conducted to study, in a generic sense and through ground simulation, the effects of engine response, rotor inertia, rpm control, excess power, and vertical damping on specific maneuvers included in nap-of-the-Earth (NOE) operations. The helicopter configuration with an rpm-governed gas-turbine engine are considered. Handling-qualities-criteria data are considered in light of aspects peculiar to rotary-wing and NOE operations. The results of three moving-based piloted simulation studies are summarized and the frequency, characteristics of the helicopter thrust response which set it apart from other VTOL types are explained. Power-system response is affected by both the engine-governor response and the level of rotor inertia. However, results indicate that with unlimited power, variations in engine response can have a significant effect on pilot rating, whereas changes in rotor inertia, in general, do not. The results also show that any pilot interaction required to maintain proper control can significantly degrade handling qualities. Data for variations in vertical damping and collective sensitivity are compared with existing handling-qualities specifications, MIL-F-83300 and AGARD 577, and show a need for higher minimums for both damping and sensitivity for the bob-up task. Results for cases of limited power are also shown.

Quality assurance: recommended guidelines for safe heating by capacitive-type heating technique to treat patients with metallic implants.

PubMed

Kato, Hirokazu; Kondo, Motoharu; Imada, Hajime; Kuroda, Masahiro; Kamimura, Yoshitsugu; Saito, Kazuyuki; Kuroda, Kagayaki; Ito, Koichi; Takahashi, Hideaki; Matsuki, Hidetoshi

2013-05-01

This article is a redissemination of the previous Japanese Quality Assurance Guide guidelines. Specific absorption rate and temperature distribution were investigated with respect to various aspects including metallic implant size and shape, insertion site, insertion direction, blood flow and heating power, and simulated results were compared with adverse reactions of patients treated by radio frequency capacitive-type heating. Recommended guidelines for safe heating methods for patients with metallic implants are presented based on our findings.

Effects of paraplegia on quality of life and family economy among patients with spinal cord injuries in selected hospitals of Sri Lanka.

PubMed

Kalyani, H H N; Dassanayake, S; Senarath, U

2015-06-01

The study was conducted with the aim of assessing the effects of paraplegia caused by spinal cord injuries on the quality of life of patients and their family economy. A descriptive cross-sectional study. The study was carried out in Accident Service, Orthopedic and Neurosurgery Units of the National Hospital of Sri Lanka and the Spinal Injury Unit of Rehabilitation Hospital Ragama. One hundred traumatic paraplegic patients were included as the study sample. Modified Ferrans and Powers quality of life index: spinal cord injury version was used to measure the quality of life. Pre- and post-family economic data were collected using an interviewer-administered questionnaire. Quality of Life was calculated under four major components. Paraplegics' family component (mean=3.50) and social, economic aspects (mean=3.24) are considerably good when compared with health and functioning (mean=2.83) and psychological (mean=2.78) components. Also the study revealed that expenditures are significantly high (P=0.001) and income is significantly less (P=0.001) after injury than before. Quality of life is relatively good on family and social aspects, whereas the physical and psychological aspects are somewhat poor. Regarding family economy, expenses are significantly high and earnings are significantly less after the injury. Contribution to the income from self-employment shows the most significant decline. Findings suggest that the family economy of such patients should be supported.

Improving cancer patient care: development of a generic cancer consumer quality index questionnaire for cancer patients.

PubMed

Booij, Judith C; Zegers, Marieke; Evers, Pauline M P J; Hendriks, Michelle; Delnoij, Diana M J; Rademakers, Jany J D J M

2013-04-23

To develop a Consumer Quality Index (CQI) Cancer Care questionnaire for measuring experiences with hospital care of patients with different types of cancer. We derived quality aspects from focus group discussions, existing questionnaires and literature. We developed an experience questionnaire and sent it to 1,498 Dutch cancer patients. Another questionnaire measuring the importance of the quality aspects was sent to 600 cancer patients. Data were psychometrically analysed. The response to the experience questionnaire was 50 percent. Psychometric analysis revealed 12 reliable scales. Patients rated rapid and adequate referral, rapid start of the treatment after diagnosis, enough information and confidence in the healthcare professionals as most important themes. Hospitals received high scores for skills and cooperation of healthcare professionals and a patient-centered approach by doctors; and low scores for psychosocial guidance and information at completion of the treatment. The CQI Cancer Care questionnaire is a valuable tool for the evaluation of the quality of cancer care from the patient's perspective. Large scale implementation is necessary to determine the discriminatory powers of the questionnaire and may enable healthcare providers to improve the quality of cancer care. Preliminary results indicate that hospitals could improve their psychosocial guidance and information provision.

Successful K-12 STEM Education: Identifying Effective Approaches in Science, Technology, Engineering, and Mathematics

ERIC Educational Resources Information Center

National Academies Press, 2011

2011-01-01

Science, technology, engineering, and mathematics (STEM) are cultural achievements that reflect our humanity, power our economy, and constitute fundamental aspects of our lives as citizens, consumers, parents, and members of the workforce. Providing all students with access to quality education in the STEM disciplines is important to our nation's…

Open-pit coal mine production sequencing incorporating grade blending and stockpiling options: An application from an Indian mine

NASA Astrophysics Data System (ADS)

Kumar, Ashish; Chatterjee, Snehamoy

2017-05-01

Production scheduling is a crucial aspect of the mining industry. An optimal and efficient production schedule can increase the profits manifold and reduce the amount of waste to be handled. Production scheduling for coal mines is necessary to maintain consistency in the quality and quantity parameters of coal supplied to power plants. Irregularity in the quality parameters of the coal can lead to heavy losses in coal-fired power plants. Moreover, the stockpiling of coal poses environmental and fire problems owing to low incubation periods. This article proposes a production scheduling formulation for open-pit coal mines including stockpiling and blending opportunities, which play a major role in maintaining the quality and quantity of supplied coal. The proposed formulation was applied to a large open-pit coal mine in India. This contribution provides an efficient production scheduling formulation for coal mines after utilizing the stockpile coal within the incubation periods with the maximization of discounted cash flows. At the same time, consistency is maintained in the quality and quantity of coal to power plants through blending and stockpiling options to ensure smooth functioning.

Using Conversation Topics for Predicting Therapy Outcomes in Schizophrenia

PubMed Central

Howes, Christine; Purver, Matthew; McCabe, Rose

2013-01-01

Previous research shows that aspects of doctor-patient communication in therapy can predict patient symptoms, satisfaction and future adherence to treatment (a significant problem with conditions such as schizophrenia). However, automatic prediction has so far shown success only when based on low-level lexical features, and it is unclear how well these can generalize to new data, or whether their effectiveness is due to their capturing aspects of style, structure or content. Here, we examine the use of topic as a higher-level measure of content, more likely to generalize and to have more explanatory power. Investigations show that while topics predict some important factors such as patient satisfaction and ratings of therapy quality, they lack the full predictive power of lower-level features. For some factors, unsupervised methods produce models comparable to manual annotation. PMID:23943658

Clients' perspective on quality of audiology care: Development of the Consumer Quality Index (CQI) 'Audiology Care' for measuring client experiences.

PubMed

Hendriks, Michelle; Dahlhaus-Booij, Judith; Plass, Anne Marie

2017-01-01

Clients' perspective on the quality of audiology care has not been investigated thoroughly. Research has focused primarily on satisfaction with, and limitations of hearing aids. We developed a Consumer Quality Index (CQI) questionnaire 'Audiology Care' to systematically assess client experiences with audiology care. The CQI Audiology Care was developed in three steps: (1) posing open-ended questions through e-mail (n = 14), (2) two small-scale surveys assessing psychometric properties of the questionnaire (n = 188) and importance of quality aspects (n = 118), and (3) a large-scale survey (n = 1793) assessing psychometric properties and discriminatory power of the questionnaire. People with complex hearing impairments and/or balance and communicative disorders who visited an audiology care centre during the past year. Important quality aspects were translated into seven reliable scales: accommodation and facilities, employees' conduct and expertise, arrangement of appointments, waiting times, client participation and effectiveness of treatment. Client experiences differed among the participating centres concerning accommodation and facilities, arrangement of appointments, waiting times and client participation. The CQI Audiology Care is a valid and reliable instrument to assess clients' experiences with audiology care. Future implementation will reveal whether results can be used to monitor and improve the quality of audiology care.

Electrical safety during transplantation.

PubMed

Amicucci, G L; Di Lollo, L; Fiamingo, F; Mazzocchi, V; Platania, G; Ranieri, D; Razzano, R; Camin, G; Sebastiani, G; Gentile, P

2010-01-01

Technologic innovations enable management of medical equipment and power supply systems, with improvements that can affect the technical aspects, economics, and quality of medical service. Herein are outlined some technical guidelines, proposed by Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, for increasing the effectiveness of the power supply system and the safety of patients and surgeons in the operating room, with particular focus on transplantation. The dependence of diagnoses and therapies on operation of the electrical equipment can potentially cause great risk to patients. Moreover, it is possible that faulty electrical equipment could produce current that may flow through the patient. Because patients are particularly vulnerable when their natural protection is considerably decreased, as during transplantation or other surgery, power supply systems must operate with a high degree of reliability and quality to prevent risk, and must be designed to reduce hazards from direct and indirect contact. Reliability of the power supply system is closely related to the quality of the project, choice of materials, and management of the system (eg, quality and frequency of servicing). Among the proposed guidelines, other than normal referencing, are (1) adoption of a monitoring system to improve the quality of the electrical parameters in the operating room, (2) institution of emergency procedures for management of electrical faults, (3) a procedure for management of fires in the operating room, (4) and maintenance interventions and inspections of medical devices to maintain minimal requirements of safety and performance. Copyright 2010 Elsevier Inc. All rights reserved.

Extending the applied software in the contemporary thermal power plants for increasing the intelligence of the automatic control system

NASA Astrophysics Data System (ADS)

Krokhin, G.; Pestunov, A.; Arakelyan, E.; Mukhin, V.

2017-11-01

During the last decades, there can be noticed an increase of interest concerning various aspects of intellectual diagnostics and management in thermal power engineering according the hybrid principle. It is conditioned by the fact that conservative static methods does not allow to reflect the actual power installation state adequately. In order to improve the diagnostics quality, we use various fuzzy systems apparatus. In this paper, we introduce the intellectual system, called SKAIS, which is intended for quick and precise diagnostics of thermal power equipment. This system was developed as the result of the research carried out by specialists from National Research University “Moscow Power Engineering Institute” and Novosibirsk State University of Economics and Management. It drastically increases the level of intelligence of the automatic power plant control system.

Improving cancer patient care: development of a generic cancer consumer quality index questionnaire for cancer patients

PubMed Central

2013-01-01

Background To develop a Consumer Quality Index (CQI) Cancer Care questionnaire for measuring experiences with hospital care of patients with different types of cancer. Methods We derived quality aspects from focus group discussions, existing questionnaires and literature. We developed an experience questionnaire and sent it to 1,498 Dutch cancer patients. Another questionnaire measuring the importance of the quality aspects was sent to 600 cancer patients. Data were psychometrically analysed. Results The response to the experience questionnaire was 50 percent. Psychometric analysis revealed 12 reliable scales. Patients rated rapid and adequate referral, rapid start of the treatment after diagnosis, enough information and confidence in the healthcare professionals as most important themes. Hospitals received high scores for skills and cooperation of healthcare professionals and a patient-centered approach by doctors; and low scores for psychosocial guidance and information at completion of the treatment. Conclusions The CQI Cancer Care questionnaire is a valuable tool for the evaluation of the quality of cancer care from the patient’s perspective. Large scale implementation is necessary to determine the discriminatory powers of the questionnaire and may enable healthcare providers to improve the quality of cancer care. Preliminary results indicate that hospitals could improve their psychosocial guidance and information provision. PMID:23617741

Using Power Ultrasound to Accelerate Food Freezing Processes: Effects on Freezing Efficiency and Food Microstructure.

PubMed

Zhang, Peizhi; Zhu, Zhiwei; Sun, Da-Wen

2018-05-31

Freezing is an effective way of food preservation. However, traditional freezing methods have the disadvantages of low freezing efficiency and generation of large ice crystals, leading to possible damage of food quality. Power ultrasound assisted freezing as a novel technique can effectively reduce the adverse effects during freezing process. This paper gives an overview on recent researches of power ultrasound technique to accelerate the food freezing processes and illustrates the main principles of power ultrasound assisted freezing. The effects of power ultrasound on liquid food, model solid food as well as fruit and vegetables are discussed, respectively, from the aspects of increasing freezing rate and improving microstructure. It is shown that ultrasound assisted freezing can effectively improve the freezing efficiency and promote the formation of small and evenly distributed ice crystals, resulting in better food quality. Different inherent properties of food samples affect the effectiveness of ultrasound application and optimum ultrasound parameters depend on the nature of the samples. The application of ultrasound to the food industry is more likely on certain types of food products and more efforts are still needed to realize the industrial translation of laboratory results.

[Vocal effectiveness in speech and singing: acoustical, physiological and perceptive aspects. applications in speech therapy].

PubMed

Pillot, C; Vaissière, J

2006-01-01

What is vocal effectiveness in lyrical singing in comparison to speech? Our study tries to answer this question, using vocal efficiency and spectral vocal effectiveness. Vocal efficiency was mesured for a trained and untrained subject. According to these invasive measures, it appears that the trained singer uses her larynx less efficiently. Efficiency of the larynx in terms of energy then appears to be secondary to the desired voice quality. The acoustic measures of spectral vocal effectiveness of vowels and sentences, spoken and sung by 23 singers, reveal two complementary markers: The "singing power ratio" and the difference in amplitude between the singing formant and the spectral minimum that follows it. Magnetic resonance imaging and simulations of [a], [i] and [o] spoken and sung show laryngeal lowering and the role of the piriform sinuses as the physiological foundations of spectral vocal effectiveness, perceptively related to carrying power. These scientifical aspects allow applications in voice therapy, such as physiological and perceptual foundations allowing patients to recuperate voice carrying power with or without background noise.

Power supply improvements for ballasts-low pressure mercury/argon discharge lamp for water purification

NASA Astrophysics Data System (ADS)

Bokhtache, A. Aissa; Zegaoui, A.; Djahbar, A.; Allouache, H.; Hemici, K.; Kessaissia, F. Z.; Bouchrit, M. S.; Aillerie, M.

2017-02-01

The low-pressure electrical discharges established in the mercury rare gas mixtures are the basis of many applications both in the field of lighting and for industrial applications. In order to select an efficient high frequency power supply (ECG -based PWM inverter), we present and discuss results obtained in the simulation of three kinds of power supplies delivering a 0.65 A - 50KHz sinusoidal current dedicated to power low pressure UV Mercury - Argon lamp used for effect germicide on water treatment thus allowing maximum UVC radiation at 253.7 nm. Three ballasts half-bridge configurations were compared with criteria based on resulting germicide efficiency, electrical yield and reliability, for example the quality of the sinusoidal current with reduced THD, and finally, we also considered in this analysis the final economic aspect.

Challenges for Synchrotron X-Ray Optics

NASA Astrophysics Data System (ADS)

Freund, Andreas K.

2002-12-01

It is the task of x-ray optics to adapt the raw beam generated by modern sources such as synchrotron storage rings to a great variety of experimental requirements in terms of intensity, spot size, polarization and other parameters. The very high quality of synchrotron radiation (source size of a few microns and beam divergence of a few micro-radians) and the extreme x-ray flux (power of several hundred Watts in a few square mm) make this task quite difficult. In particular the heat load aspect is very important in the conditioning process of the brute x-ray power to make it suitable for being used on the experimental stations. Cryogenically cooled silicon crystals and water-cooled diamond crystals can presently fulfill this task, but limits will soon be reached and new schemes and materials must be envisioned. A major tendency of instrument improvement has always been to concentrate more photons into a smaller spot utilizing a whole variety of focusing devices such as Fresnel zone plates, refractive lenses and systems based on bent surfaces, for example, Kirkpatrick-Baez systems. Apart from the resistance of the sample, the ultimate limits are determined by the source size and strength on one side, by materials properties, cooling, mounting and bending schemes on the other side, and fundamentally by the diffraction process. There is also the important aspect of coherence that can be both a nuisance and a blessing for the experiments, in particular for imaging techniques. Its conservation puts additional constraints on the quality of the optical elements. The overview of the present challenges includes the properties of present and also mentions aspects of future x-ray sources such as the "ultimate" storage ring and free electron lasers. These challenges range from the thermal performances of monochromators to the surface quality of mirrors, from coherence preservation of modern multilayers to short pulse preservation by crystals, and from micro- and nano-focusing techniques to the accuracy and stability of mechanical supports.

Review of the transmissions of the Soviet helicopters

NASA Technical Reports Server (NTRS)

Chaiko, Lev I.

1990-01-01

A review of the following aspects of Soviet helicopter transmissions is presented: transmitted power, weight, reduction ratio, RPM, design configuration, comparison of different type of manufacturing methods, and a description of the materials and technologies applied to critical transmission components. Included are mechanical diagrams of the gearboxes of the Soviet helicopters and test stands for testing gearbox and main shaft. The quality of Soviet helicopter transmissions and their Western counterparts are assessed and compared.

The reliability evaluation of reclaimed water reused in power plant project

NASA Astrophysics Data System (ADS)

Yang, Jie; Jia, Ru-sheng; Gao, Yu-lan; Wang, Wan-fen; Cao, Peng-qiang

2017-12-01

The reuse of reclaimed water has become one of the important measures to solve the shortage of water resources in many cities, But there is no unified way to evaluate the engineering. Concerning this issue, it took Wanneng power plant project in Huai city as a example, analyzed the reliability of wastewater reuse from the aspects of quality in reclaimed water, water quality of sewage plant, the present sewage quantity in the city and forecast of reclaimed water yield, in particular, it was necessary to make a correction to the actual operation flow rate of the sewage plant. the results showed that on the context of the fluctuation of inlet water quality, the outlet water quality of sewage treatment plants is basically stable, and it can meet the requirement of circulating cooling water, but suspended solids(SS) and total hardness in boiler water exceed the limit, and some advanced treatment should be carried out. In addition, the total sewage discharge will reach 13.91×104m3/d and 14.21×104m3/d respectively in the two planning level years of the project. They are greater than the normal collection capacity of the sewage system which is 12.0×104 m3/d, and the reclaimed water yield can reach 10.74×104m3/d, which is greater than the actual needed quantity 8.25×104m3/d of the power plant, so the wastewater reuse of this sewage plant are feasible and reliable to the power plant in view of engineering.

Effective doctor-patient communication: an updated examination.

PubMed

Matusitz, Jonathan; Spear, Jennifer

2014-01-01

This article examines, in detail, the quality of doctor-patient interaction. Doctor-patient communication is such a powerful indicator of health care quality that it can determine patients' self-management behavior and health outcomes. The medical visit (i.e., the medical encounter) plays a pivotal role in the health care process. In fact, doctor-patient communication is one of the most essential dynamics in health care, affecting the course of patient care and patient compliance with recommendations for care. Unlike many other analyses (that often look at only one or two specific aspects of doctor-patient relationships), this analysis is more encompassing; it looks at doctor-patient communication from multiple perspectives.

Heavy-light, absent-present: rethinking the 'weight' of imprisonment.

PubMed

Crewe, Ben; Liebling, Alison; Hulley, Susie

2014-09-01

Since King and McDermott (1995), following Downes (1988), defined the psychological oppressiveness of incarceration in terms of 'weight', little has been written about the 'weight of imprisonment'. None the less, it is generally assumed that prisons that are 'light' are preferable to those that are 'heavy' - in part because of an assumption among many penologists that power, and its application, is dangerous and antagonistic. This article does not dispute that 'heavy' prisons are undesirable. Its argument is that there can also be dangers if prisons are excessively light. Many of these dangers are linked to the under-use of power. The tone and quality of prison life depends on the combined effects of institutional weight with the 'absence' or 'presence' of staff power. Drawing on prisoners' descriptions of their experiences in public and private sector prisons, and their assessments of important aspects of their quality of life, the article outlines what these concepts mean in practice. The authors develop a four-quadrant framework for conceptualizeng penal legitimacy and the experience of penal authority. © London School of Economics and Political Science 2014.

Competence and Quality in Real-Life Decision Making.

PubMed

Geisler, Martin; Allwood, Carl Martin

2015-01-01

What distinguishes a competent decision maker and how should the issue of decision quality be approached in a real-life context? These questions were explored in three studies. In Study 1, using a web-based questionnaire and targeting a community sample, we investigated the relationships between objective and subjective indicators of real-life decision-making success. In Study 2 and 3, targeting two different samples of professionals, we explored if the prevalent cognitively oriented definition of decision-making competence could be beneficially expanded by adding aspects of competence in terms of social skills and time-approach. The predictive power for each of these three aspects of decision-making competence was explored for different indicators of real-life decision-making success. Overall, our results suggest that research on decision-making competence would benefit by expanding the definition of competence, by including decision-related abilities in terms of social skills and time-approach. Finally, the results also indicate that individual differences in real-life decision-making success profitably can be approached and measured by different criteria.

Lithography-induced limits to scaling of design quality

NASA Astrophysics Data System (ADS)

Kahng, Andrew B.

2014-03-01

Quality and value of an IC product are functions of power, performance, area, cost and reliability. The forthcoming 2013 ITRS roadmap observes that while manufacturers continue to enable potential Moore's Law scaling of layout densities, the "realizable" scaling in competitive products has for some years been significantly less. In this paper, we consider aspects of the question, "To what extent should this scaling gap be blamed on lithography?" Non-ideal scaling of layout densities has been attributed to (i) layout restrictions associated with multi-patterning technologies (SADP, LELE, LELELE), as well as (ii) various ground rule and layout style choices that stem from misalignment, reliability, variability, device architecture, and electrical performance vs. power constraints. Certain impacts seem obvious, e.g., loss of 2D flexibility and new line-end placement constraints with SADP, or algorithmically intractable layout stitching and mask coloring formulations with LELELE. However, these impacts may well be outweighed by weaknesses in design methodology and tooling. Arguably, the industry has entered a new era in which many new factors - (i) standard-cell library architecture, and layout guardbanding for automated place-and-route: (ii) performance model guardbanding and signoff analyses: (iii) physical design and manufacturing handoff algorithms spanning detailed placement and routing, stitching and RET; and (iv) reliability guardbanding - all contribute, hand in hand with lithography, to a newly-identified "design capability gap". How specific aspects of process and design enablements limit the scaling of design quality is a fundamental question whose answer must guide future RandD investment at the design-manufacturing interface. terface.

Quality of care and service trajectories for people with intellectual disabilities: defining the aspects of quality from the client's perspective.

PubMed

Barelds, Anna; van de Goor, Ien; van Heck, Guus; Schols, Jos

2010-03-01

Care and service trajectories for people with intellectual disabilities (i.e. people with mental retardations) are routes within the healthcare delivery system that consist of all the steps that people with intellectual disabilities and their families have to take in order to realise the needed care and services. This article aims to identify the quality aspects of trajectories that are considered important by people with intellectual disabilities and their parents/relatives. In addition, it examines how these aspects are related to quality determinants mentioned in the literature on integrated care and to authoritative models for quality assessment of care and service delivery. Quality aspects were collected during eight focus group discussions with people with intellectual disabilities or their parents/relatives. In addition, quality determinants of integrated care and authoritative models for quality assessment were selected by means of a thorough review of the literature. Finally, the quality aspects identified using focus groups were compared to the determinants and models found in the literature. The quality aspects presented by people with intellectual disabilities referred particularly to the immediate situation in receiving care and services, such as 'keeping appointments' and 'time and attention', whereas parents/relatives also referred to broader 'organisational issues', such as 'access to support' and 'problems with placement'. The quality aspects, however, are minimally related to the quality determinants of integrated care, probably because clients and their parents/relatives find it difficult to have an overview of the coherence between the various actions that have to be performed, when going through the trajectories. In contrast, the quality aspects seem to fit into the domains of the authoritative models for quality assessment, probably because of the minimal focus of the models on long-term aspects in care and service delivery.

High-Penetration Photovoltaic Planning Methodologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, David Wenzhong; Muljadi, Eduard; Tian, Tian

The main objective of this report is to provide an overview of select U.S. utility methodologies for performing high-penetration photovoltaic (HPPV) system planning and impact studies. This report covers the Federal Energy Regulatory Commission's orders related to photovoltaic (PV) power system interconnection, particularly the interconnection processes for the Large Generation Interconnection Procedures and Small Generation Interconnection Procedures. In addition, it includes U.S. state interconnection standards and procedures. The procedures used by these regulatory bodies consider the impacts of HPPV power plants on the networks. Technical interconnection requirements for HPPV voltage regulation include aspects of power monitoring, grounding, synchronization, connection tomore » the overall distribution system, back-feeds, disconnecting means, abnormal operating conditions, and power quality. This report provides a summary of mitigation strategies to minimize the impact of HPPV. Recommendations and revisions to the standards may take place as the penetration level of renewables on the grid increases and new technologies develop in future years.« less

UPEC `94 review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammons, T.J.

1995-02-01

The twenty-ninth Universities Power Engineering Conference (UPEC `94), held September 14--16, 1994, at University College, Galway, Ireland, surpassed all previous meetings in respect of number and quality of technical content of the papers and number of delegates attending. As in the past, it had a broad theme, covering all aspects of electrical power engineering, and was attended by academics, research workers, and members of the power service and manufacturing organizations. During the sessions, 265 papers from more than 30 countries were debated. There were 27 technical sessions, 3 poster sessions, and an opening and a closing session, 160 papers beingmore » presented orally in four groups of parallel sessions, the remainder being presented in poster sessions. The high standard of the papers, presentations, and technical discussions was particularly gratifying. The Universities Power Engineering Conference, held annually, provides a forum for the exchange of ideas among practicing engineers from the universities, consultants, and in the manufacturing and supply industries.« less

Design aspects of a solar array drive for spot, with a high platform stability objective

NASA Technical Reports Server (NTRS)

Cabillic, J.; Fournier, J. P.; Anstett, P.; Souliac, M.; Thomin, G.

1981-01-01

A solar array drive mechanism (MEGS) for the SPOT platform, which is a prototype of a multimission platform, is described. High-resolution cameras and other optical instruments are carried by the platform, requiring excellent platform stability in order to obtain high-quality pictures. Therefore, a severe requirement for the MEGS is the low level of disturbing torques it may generate considering the 0.6 times 10 to the minus 3 power deg/sec stability required. The mechanical design aspects aiming at reducing the mean friction torque, and therefore its fluctuations, are described as well as the method of compensation of the motor imperfections. It was concluded, however, that this is not sufficient to reach the stability requirement.

Intrapersonal self-transcendence, meaning-in-life and nurse-patient interaction: powerful assets for quality of life in cognitively intact nursing-home patients.

PubMed

Haugan, Gørill; Moksnes, Unni Karin; Løhre, Audhild

2016-12-01

Spirituality has demonstrated a significant impact on quality of life in nursing-home patients. Likewise, as essential aspects of spirituality, hope, self-transcendence, and meaning are found to be vital resources to nursing-home patients' global well-being. Further, nurse-patient interaction has demonstrated a powerful influence on patient's hope, self-transcendence, and meaning-in-life, as well as on anxiety and depression. The present study investigated the associations of hope, self-transcendence, meaning, and perceived nurse-patient interaction with quality of life. In a cross-sectional design, a sample of 202 cognitively intact nursing-home patients in Mid-Norway responded to the Herth Hope Index, the Self-Transcendence scale, the Purpose-in-Life test, the Nurse-Patient Interaction scale, and a one-item overall measure on quality of life. Using SPSS ordinal regression, bivariate and multivariate analyses were conducted with quality of life as dependent variable. Controlling for gender, age, and residential time, all the scales were significantly related to quality of life in the bivariate analyses. Intrapersonal self-transcendence showed an exceptional position presenting a very high odds ratio in the bivariate analysis, and also the strongest association with quality of life in multivariate analyses. Meaning and nurse-patient interaction also showed independent and significant associations with quality of life. The associations found encourage the idea that intrapersonal self-transcendence, meaning-in-life, and nurse-patient interaction are powerful health-promoting factors that significantly influence on nursing-home patients' quality of life. Therefore, pedagogical approaches for advancing caregivers' presence and confidence in health-promoting interaction should be upgraded and matured. Proper educational programs for developing interacting skills including assessing and supporting patients' intrapersonal self-transcendence and meaning-in-life should be utilised and their effectiveness evaluated. © 2016 Nordic College of Caring Science.

Real-time head movement system and embedded Linux implementation for the control of power wheelchairs.

PubMed

Nguyen, H T; King, L M; Knight, G

2004-01-01

Mobility has become very important for our quality of life. A loss of mobility due to an injury is usually accompanied by a loss of self-confidence. For many individuals, independent mobility is an important aspect of self-esteem. Head movement is a natural form of pointing and can be used to directly replace the joystick whilst still allowing for similar control. Through the use of embedded LINUX and artificial intelligence, a hands-free head movement wheelchair controller has been designed and implemented successfully. This system provides for severely disabled users an effective power wheelchair control method with improved posture, ease of use and attractiveness.

Safety aspects for public access defibrillation using automated external defibrillators near high-voltage power lines.

PubMed

Schlimp, C J; Breiteneder, M; Lederer, W

2004-05-01

Automated external defibrillators (AEDs) must combine easy operability and high-quality diagnosis even under unfavorable conditions. This study determined the influence of electromagnetic interference caused by high-voltage power lines with 16.7-Hz alternating current on the quality of AEDs' rhythm analysis. Two AEDs frequently used in Austria were tested near high-voltage power lines (15 kV or 110 kV, alternating current with 16.7 Hz). The defibrillation electrodes were attached either to a proband with true sinus rhythm or to a resuscitation dummy with generated sinus rhythm, ventricular fibrillation, ventricular tachycardia or asystole. Electromagnetic interference was much more prominent in a human's than in a dummy's electrocardiogram and depended on the position of the electrodes and cables in relation to the power line. Near high-voltage power lines the AEDs showed a significant operational fault. One AED interpreted the interference as a motion artifact, even when underlying rhythms were clearly detectable. The other AED interpreted 16.7-Hz oscillation as ventricular fibrillation with consequent shock advice when no underlying rhythm was detected. The tested AEDs neither filter nor recognize a technical interference of 16.7 Hz caused by 15-kV power lines above railway tracks or 110-kV overland power lines, as run by railway companies in Austria, Germany, Norway, Sweden and Switzerland. These failures in AEDs' algorithms for rhythm analysis may cause substantial harm to patients undergoing public access defibrillation. The proper function of AEDs needs to be reconsidered to guarantee patients' safety near high-voltage power lines.

Quality assessment and comparison of grading between examiners and supervisors of Bachelor theses in nursing education.

PubMed

Lundgren, Solveig M; Halvarsson, Maud; Robertsson, Barbro

2008-01-01

This study compares supervisors' and examiners' grading of quality of theses at Bachelor level in nursing. An instrument developed to asses the quality of theses was used. Eight aspects of quality were rated. One hundred and fifteen theses were rated by both examiner and supervisor. Significant correlations were found between examiners' and supervisors' ratings of all aspects of quality. Good agreement was found in 89-96% of the ratings on individual aspects of quality. The means of differences between ratings were small but significantly differed from zero in four out of eight aspects. In theses rated low for quality of language and formality, differences between examiners' and supervisors' ratings on all aspects of quality were significantly larger than in theses rated high for quality of language and formality. The general conclusion is that the evaluations made by examiners and by supervisors corresponded well. Differences found indicates that examiners in general give lower scores than supervisors especially on quality aspects that are most closely related to research methods and experiences. This study is part of a larger project that is investigating quality of theses and the student's attitudes and learning experiences of writing theses.

21 CFR 26.19 - Information relating to quality aspects.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Information relating to quality aspects. 26.19... relating to quality aspects. The authorities will establish an appropriate means of exchanging information... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM...

21 CFR 26.19 - Information relating to quality aspects.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Information relating to quality aspects. 26.19... relating to quality aspects. The authorities will establish an appropriate means of exchanging information... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM...

21 CFR 26.19 - Information relating to quality aspects.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Information relating to quality aspects. 26.19... relating to quality aspects. The authorities will establish an appropriate means of exchanging information... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM...

21 CFR 26.19 - Information relating to quality aspects.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Information relating to quality aspects. 26.19... relating to quality aspects. The authorities will establish an appropriate means of exchanging information... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM...

Nuclear Power: Is It a New Clear Choice for Malaysia

NASA Astrophysics Data System (ADS)

Besar, Idris B.

2008-05-01

Energy is essential for socio-economic development. Any nation's standard of living is closely related to its access to energy. To put into perspective, the per capita electricity consumptions in developed countries of the Organisation for Economic Cooperation and Development (OECD) is currently estimated at 8600 kilowatts-hour per year as compared to the consumption rates in Malaysia and some African countries of 3300 and 50 kilowatts-hour per year, respectively. Energy is therefore an important pre-requisite for achieving the Malaysian vision of becoming a developed nation by the year 2020, in that it is needed not only for industrialization programme but also in maintaining quality of life. In Malaysia, the main concern currently is still on the supply in term of adequacy, reliability and quality; and moving slowly but steadily towards security, sustainability, environmentally friendly and contribution to climate change. With this new dimension, nuclear power emerged as a good match to a possible alternative in the comprehensive national energy policy. Many studies presented the positive aspects of nuclear power while others indicated the bad sides and potential risks. This paper will highlight some of those pros and cons as well as the potential risks beside a discussion on relevant requirements for a nuclear power programme in particular those of interest to the professionals in the physical sciences.

Pharmacy specialists' attitudes toward pharmaceutical service quality at community pharmacies.

PubMed

Urbonas, Gvidas; Jakušovaitė, Irayda; Savickas, Arūnas

2010-01-01

The main objective of this study was to analyze pharmacy specialists' attitudes toward the quality of pharmaceutical services at Lithuanian community pharmacies. Between April and June 2009, a total of 471 Lithuanian community pharmacy specialists completed a questionnaire designed to evaluate their attitudes toward the quality of pharmaceutical services at community pharmacies. The main dimensions of pharmaceutical service quality were extracted by principal component analysis. Two main dimensions of pharmaceutical service quality were extracted: pharmacotherapeutic aspects (provision of information about drug therapy, possible side effects, health promotion, the amount of time spent with a patient, and the ascertainment that a patient understood the provided information) and socioeconomic aspects (considering patient's needs and financial capabilities, making a patient confident with the services provided). Pharmacy specialists evaluated the quality of both dimensions positively, but the quality of the first dimension was rated significantly worse than that of the second dimension. The attitudes of pharmacy specialists working at independent pharmacies were more positive toward pharmacotherapeutic aspects as compared to the specialists working at chain or state pharmacies. Pharmacotherapeutic aspects were rated better by pharmacy specialists, aged ≥ 55 years, than those younger than 45 years. Moreover, the attitudes of 45-54-year-old pharmacy specialists toward the socioeconomic aspects were more positive as compared with those of 35-44-year olds. Pharmacists rated the socioeconomic aspects of pharmaceutical service quality worse as compared with pharmacy technicians. The attitudes of pharmacy specialists working at pharmacies with 6-9 specialists were more negative toward pharmacotherapeutic aspects than those of the pharmacies with 1-2 specialists. Pharmacy specialists working at pharmacies with ≥ 10 specialists reported lower scores of socioeconomic aspects as compared to those working at pharmacies with fewer specialists. Men evaluated both pharmacotherapeutic and socioeconomic aspects worse than women. The evaluation of pharmaceutical service quality did not differ by pharmacy location. Two dimensions of pharmaceutical service quality were determined. According to Lithuanian pharmacy specialists, the quality of pharmacotherapeutic aspects at community pharmacies was worse than that of socioeconomic aspects. The evaluation of the quality of pharmaceutical service significantly differed according to the specialists' sex, age, qualification, and type and size of pharmacies.

Optimizing space constellations for mobile satellite systems

NASA Technical Reports Server (NTRS)

Roussel, T.; Taisant, J.-P.

1993-01-01

Designing a mobile satellite system entails many complex trade-offs between a great number of parameters including: capacity, complexity of the payload, constellation geometry, number of satellites, quality of coverage, etc. This paper aims at defining a methodology which tries to split the variables to give rapidly some first results. The major input considered is the traffic assumption which would be offered by the system. A first key step is the choice of the best Rider or Walker constellation geometries - with different numbers of satellites - to insure a good quality of coverage over a selected service area. Another aspect to be addressed is the possible altitude location of the constellation, since it is limited by many constraints. The altitude ranges that seem appropriate considering the spatial environment, the launch and orbit keeping policy and the feasibility of the antenna allowing sufficient frequency reuse are briefly analyzed. To support these first considerations, some 'reference constellations' with similar coverage quality are chosen. The in-orbit capacity needed to support the assumed traffic is computed versus altitude. Finally, the exact number of satellite is determined. It comes as an optimum between a small number of satellites offering a high (and costly) power margin in bad propagation situation and a great number of less powerful satellites granting the same quality of service.

Optimizing space constellations for mobile satellite systems

NASA Astrophysics Data System (ADS)

Roussel, T.; Taisant, J.-P.

Designing a mobile satellite system entails many complex trade-offs between a great number of parameters including: capacity, complexity of the payload, constellation geometry, number of satellites, quality of coverage, etc. This paper aims at defining a methodology which tries to split the variables to give rapidly some first results. The major input considered is the traffic assumption which would be offered by the system. A first key step is the choice of the best Rider or Walker constellation geometries - with different numbers of satellites - to insure a good quality of coverage over a selected service area. Another aspect to be addressed is the possible altitude location of the constellation, since it is limited by many constraints. The altitude ranges that seem appropriate considering the spatial environment, the launch and orbit keeping policy and the feasibility of the antenna allowing sufficient frequency reuse are briefly analyzed. To support these first considerations, some 'reference constellations' with similar coverage quality are chosen. The in-orbit capacity needed to support the assumed traffic is computed versus altitude. Finally, the exact number of satellite is determined. It comes as an optimum between a small number of satellites offering a high (and costly) power margin in bad propagation situation and a great number of less powerful satellites granting the same quality of service.

Devotion, Diversity, and Reasoning: Religion and Medical Ethics.

PubMed

Dahnke, Michael D

2015-12-01

Most modern ethicists and ethics textbooks assert that religion holds little or no place in ethics, including fields of professional ethics like medical ethics. This assertion, of course, implicitly refers to ethical reasoning, but there is much more to the ethical life and the practice of ethics-especially professional ethics-than reasoning. It is no surprise that teachers of practical ethics, myself included, often focus on reasoning to the exclusion of other aspects of the ethical life. Especially for those with a philosophical background, reasoning is the most patent and pedagogically controllable aspect of the ethical life-and the most easily testable. And whereas there may be powerful reasons for the limitation of religion in this aspect of ethics, there are other aspects of the ethical life in which recognition of religious belief may arguably be more relevant and possibly even necessary. I divide the ethical life into three areas-personal morality, interpersonal morality, and rational morality-each of which I explore in terms of its relationship to religion, normatively characterized by the qualities of devotion, diversity, and reasoning, respectively.

Power and powerlessness: GPs' narratives about lifestyle counselling.

PubMed

Abildsnes, Eirik; Walseth, Liv Tveit; Flottorp, Signe A; Stensland, Per S

2012-03-01

Power in doctor-patient relationships is asymmetrically distributed. The doctor holds resources the patient needs and has a mandate to promote healthy living. Power may benefit or harm the patients' health, and the doctor-patient relationship. To identify aspects of power and powerlessness in GPs' narratives about lifestyle counselling. A qualitative study using focus groups from peer-group meetings of Norwegian GPs attending continuing medical education. GPs discussed case stories about lifestyle counselling in focus groups. The discussions were transcribed and the text analysed using systematic text condensation. Aspects of power concerning the framework of the consultation and the GPs' professional role were found. Also identified were: power expressed by opportunistic approaches to change patients' lifestyle; rhetoric communication; paternalism; and disclosure. GPs reported powerlessness in complex communication, when there were difficulties reaching goals, and when patients resisted or ignored their proposals. Case-study discussions in peer groups disclose several aspects of power and powerlessness that occur in consultations. Consciousness about aspects of power may facilitate counselling that benefits the patient and the doctor-patient relationship.

Economical analysis of saturation mutagenesis experiments

PubMed Central

Acevedo-Rocha, Carlos G.; Reetz, Manfred T.; Nov, Yuval

2015-01-01

Saturation mutagenesis is a powerful technique for engineering proteins, metabolic pathways and genomes. In spite of its numerous applications, creating high-quality saturation mutagenesis libraries remains a challenge, as various experimental parameters influence in a complex manner the resulting diversity. We explore from the economical perspective various aspects of saturation mutagenesis library preparation: We introduce a cheaper and faster control for assessing library quality based on liquid media; analyze the role of primer purity and supplier in libraries with and without redundancy; compare library quality, yield, randomization efficiency, and annealing bias using traditional and emergent randomization schemes based on mixtures of mutagenic primers; and establish a methodology for choosing the most cost-effective randomization scheme given the screening costs and other experimental parameters. We show that by carefully considering these parameters, laboratory expenses can be significantly reduced. PMID:26190439

Sustaining High Quality Teaching and Evidence-based Curricula: Follow-up Assessment of Teachers in the REDI Project

PubMed Central

Bierman, Karen L; DeRousie, Rebecca M. Sanford; Heinrichs, Brenda; Domitrovich, Celene E.; Greenberg, Mark T.; Gill, Sukhdeep

2013-01-01

Recent research has validated the power of evidence-based preschool interventions to improve teaching quality and promote child school readiness when implemented in the context of research trials. However, very rarely are follow-up assessments conducted with teachers in order to evaluate the maintenance of improved teaching quality or sustained use of evidence-based curriculum components after the intervention trial. In the current study, we collected follow-up assessments of teachers one year after their involvement in the REDI research trial to evaluate the extent to which intervention teachers continued to implement the REDI curriculum components with high-quality, and to explore possible pre-intervention predictors of sustained implementation. In addition, we conducted classroom observations to determine whether general improvements in the teaching quality of intervention teachers (relative to control group teachers) were sustained. Results indicated sustained high-quality implementation of some curriculum components (the PATHS curriculum), but decreased implementation of other components (the language-literacy components). Sustained intervention effects were evident on most aspects of general teaching quality targeted by the intervention. Implications for practice and policy are discussed. PMID:24204101

The Novel Nonlinear Adaptive Doppler Shift Estimation Technique and the Coherent Doppler Lidar System Validation Lidar

NASA Technical Reports Server (NTRS)

Beyon, Jeffrey Y.; Koch, Grady J.

2006-01-01

The signal processing aspect of a 2-m wavelength coherent Doppler lidar system under development at NASA Langley Research Center in Virginia is investigated in this paper. The lidar system is named VALIDAR (validation lidar) and its signal processing program estimates and displays various wind parameters in real-time as data acquisition occurs. The goal is to improve the quality of the current estimates such as power, Doppler shift, wind speed, and wind direction, especially in low signal-to-noise-ratio (SNR) regime. A novel Nonlinear Adaptive Doppler Shift Estimation Technique (NADSET) is developed on such behalf and its performance is analyzed using the wind data acquired over a long period of time by VALIDAR. The quality of Doppler shift and power estimations by conventional Fourier-transform-based spectrum estimation methods deteriorates rapidly as SNR decreases. NADSET compensates such deterioration in the quality of wind parameter estimates by adaptively utilizing the statistics of Doppler shift estimate in a strong SNR range and identifying sporadic range bins where good Doppler shift estimates are found. The authenticity of NADSET is established by comparing the trend of wind parameters with and without NADSET applied to the long-period lidar return data.

Crucial aspects promoting meaning and purpose in life: perceptions of nursing home residents.

PubMed

Drageset, Jorunn; Haugan, Gørill; Tranvåg, Oscar

2017-10-30

Meaning and purpose in life are fundamental to human beings. In changing times, with an aging population and increased life expectancy, the need for health care services and long-term care is likely to grow. More deeply understanding how older long-term care residents perceive meaning and purpose in life is critical for improving the quality of care and the residents' quality of life. The purpose of this study was to explore crucial aspects promoting nursing home residents' experience of meaning and purpose in everyday life. An exploratory hermeneutical design with qualitative interviews for collecting data. Four key experiences were found to promote meaning and purpose in life: 1) physical and mental well-being, 2) belonging and recognition, 3) personally treasured activities and 4) spiritual closeness and connectedness. In supporting meaning and purpose in life of nursing home residents, the residents' everyday well-being should be a central focus of care and facilitate personally treasured activities. Focused attention should also be given to the meaning-making power of experiencing belonging, recognition and spiritual connectedness.

Competence and Quality in Real-Life Decision Making

PubMed Central

2015-01-01

What distinguishes a competent decision maker and how should the issue of decision quality be approached in a real-life context? These questions were explored in three studies. In Study 1, using a web-based questionnaire and targeting a community sample, we investigated the relationships between objective and subjective indicators of real-life decision-making success. In Study 2 and 3, targeting two different samples of professionals, we explored if the prevalent cognitively oriented definition of decision-making competence could be beneficially expanded by adding aspects of competence in terms of social skills and time-approach. The predictive power for each of these three aspects of decision-making competence was explored for different indicators of real-life decision-making success. Overall, our results suggest that research on decision-making competence would benefit by expanding the definition of competence, by including decision-related abilities in terms of social skills and time-approach. Finally, the results also indicate that individual differences in real-life decision-making success profitably can be approached and measured by different criteria. PMID:26545239

Development of a standardized control module for dc-to-dc converters

NASA Technical Reports Server (NTRS)

Yu, Y.; Iwens, R. I.; Lee, F. C.; Inouye, L. Y.

1977-01-01

The electrical performance of a power processor depends on the quality of its control system. Most of the existing control circuits suffer one or more of the following imperfections that tend to restrict their respective utility: (1) inability to perform different modes of duty cycle control; (2) lack of immunity to output filter parameter changes, and (3) lack of capability to provide power component stress limiting on an instantaneous basis. The three lagging aspects of existing control circuits have been used to define the major objectives of the current Standardized Control Module (SCM) Program. Detailed information on the SCM functional block diagram, its universality, and performance features, circuit description, test results, and modeling and analysis efforts are presented.

The Relationship Between Professional Quality of Life and Caring Ability in Critical Care Nurses.

PubMed

Mohammadi, Marzieh; Peyrovi, Hamid; Mahmoodi, Mahmood

Critical care nursing has some features that may affect the ability of critical care nurses to provide care. Professionals as critical care nurses who deal with peoples' health and life often experience some levels of stress that affects their quality of life. This study examined the relationship between professional quality of life and caring ability of critical care nurses. In this descriptive correlational study, 253 critical care nurses working in the medical and surgical intensive care units of Tehran University of Medical Sciences were recruited by convenience sampling method. The data collection tools included demographic data form, Caring Ability Inventory, and questionnaire for professional quality of life version 5. There was a statistically significant positive relationship between the professional quality of life and the caring ability (P < .0001). A significant inverse relationship was found between burn-out subscale of compassion fatigue as one aspect of professional life quality with all 3 aspects of caring ability (knowledge, courage, and patience). Secondary traumatic stress, as another subscale of compassion fatigue (as one aspect of professional quality of life), had no statistically significant correlation with caring ability aspects of knowledge and patience. However, there was a significant inverse correlation between the secondary traumatic stress and courage aspect of caring ability (P < .0001). There was a statistically significant positive relationship between compassion satisfaction aspect of professional life quality with knowledge and patience aspects of caring ability, but there was not any relationship between the compassion satisfaction aspect of professional life quality and the courage aspect of caring ability. Improvement of critical care nurses' professional quality of life may increase their caring ability, thereby leading to better and more effective nursing care. Increased awareness by critical care nurse managers of the compassion fatigue phenomenon (secondary traumatic stress and burnout) and its effect on quality of critical care would be helpful in planning more specific strategies and preventing the onset and progression of these symptoms.

The relevance of body positioning and its training effect on badminton smash.

PubMed

Li, Shiming; Zhang, Zhao; Wan, Bingjun; Wilde, Brandie; Shan, Gongbing

2017-02-01

One of the dominant skills in badminton is the forehand overhead smash, which consists of 1/5 attacks during games. Empirical evidences show that one has to adjust the body position in relation to the coming shuttlecock to produce a powerful and accurate smash. Therefore, positioning is a fundamental aspect influencing smash quality. Unfortunately, a search of literature has shown that there is a dearth/lack of study on this fundamental aspect. The goals of this study were to determine the influence of positioning and training experience on smash quality in order to discover information that could help learn/acquire the skill. Using 3D motion capture and full-body biomechanical modelling, 14 skilled and 15 novice players were analysed. Results have revealed that the body positioning has direct influence on shuttlecock release angle and clearance height of the offensive player. The results also suggest that, for training the positioning of beginners, one could conduct a self-selected comfort position towards a statically hanged shuttlecock and then step one foot back - a practical reference marker for learning. As one gains experience through repetitive training, improved limbs' coordination would increase smash quality further. We hope our findings will benefit practitioners for developing effective training programmes for beginners.

Diagnosis and Prognostic of Wastewater Treatment System Based on Bayesian Network

NASA Astrophysics Data System (ADS)

Li, Dan; Yang, Haizhen; Liang, XiaoFeng

2010-11-01

Wastewater treatment is a complicated and dynamic process. The treatment effect can be influenced by many variables in microbial, chemical and physical aspects. These variables are always uncertain. Due to the complex biological reaction mechanisms, the highly time-varying and multivariable aspects, the diagnosis and prognostic of wastewater treatment system are still difficult in practice. Bayesian network (BN) is one of the best methods for dealing with uncertainty in the artificial intelligence field. Because of the powerful inference ability and convenient decision mechanism, BN can be employed into the model description and influencing factor analysis of wastewater treatment system with great flexibility and applicability.In this paper, taking modified sequencing batch reactor (MSBR) as an analysis object, BN model was constructed according to the influent water quality, operational condition and effluent effect data of MSBR, and then a novel approach based on BN is proposed to analyze the influencing factors of the wastewater treatment system. The approach presented gives an effective tool for diagnosing and predicting analysis of the wastewater treatment system. On the basis of the influent water quality and operational condition, effluent effect can be predicted. Moreover, according to the effluent effect, the influent water quality and operational condition also can be deduced.

Power and powerlessness: GPs' narratives about lifestyle counselling

PubMed Central

Abildsnes, Eirik; Walseth, Liv Tveit; Flottorp, Signe A; Stensland, Per S

2012-01-01

Background Power in doctor–patient relationships is asymmetrically distributed. The doctor holds resources the patient needs and has a mandate to promote healthy living. Power may benefit or harm the patients' health, and the doctor–patient relationship. Aim To identify aspects of power and powerlessness in GPs' narratives about lifestyle counselling. Design and setting A qualitative study using focus groups from peer-group meetings of Norwegian GPs attending continuing medical education. Method GPs discussed case stories about lifestyle counselling in focus groups. The discussions were transcribed and the text analysed using systematic text condensation. Results Aspects of power concerning the framework of the consultation and the GPs' professional role were found. Also identified were: power expressed by opportunistic approaches to change patients' lifestyle; rhetoric communication; paternalism; and disclosure. GPs reported powerlessness in complex communication, when there were difficulties reaching goals, and when patients resisted or ignored their proposals. Conclusion Case-study discussions in peer groups disclose several aspects of power and powerlessness that occur in consultations. Consciousness about aspects of power may facilitate counselling that benefits the patient and the doctor–patient relationship. PMID:22429431

Modeling wind energy potential in a data-poor region: A geographic information systems model for Iraq

NASA Astrophysics Data System (ADS)

Khayyat, Abdulkareem Hawta Abdullah Kak Ahmed

Scope and Method of Study: Most developing countries, including Iraq, have very poor wind data. Existing wind speed measurements of poor quality may therefore be a poor guide to where to look for the best wind resources. The main focus of this study is to examine how effectively a GIS spatial model estimates wind power potential in regions where high-quality wind data are very scarce, such as Iraq. The research used a mixture of monthly and hourly wind data from 39 meteorological stations. The study applied spatial analysis statistics and GIS techniques in modeling wind power potential. The model weighted important human, environmental and geographic factors that impact wind turbine siting, such as roughness length, land use⪉nd cover type, airport locations, road access, transmission lines, slope and aspect. Findings and Conclusions: The GIS model provided estimations for wind speed and wind power density and identified suitable areas for wind power projects. Using a high resolution (30*30m) digital elevation model DEM improved the GIS wind suitability model. The model identified areas suitable for wind farm development on different scales. The model showed that there are many locations available for large-scale wind turbines in the southern part of Iraq. Additionally, there are many places in central and northern parts (Kurdistan Region) for smaller scale wind turbine placement.

Device-Training for Individuals with Thoracic and Lumbar Spinal Cord Injury Using a Powered Exoskeleton for Technically Assisted Mobility: Achievements and User Satisfaction

PubMed Central

Gillner, Annett; Borgwaldt, Nicole; Kroll, Sylvia; Roschka, Sybille

2016-01-01

Objective. Results of a device-training for nonambulatory individuals with thoracic and lumbar spinal cord injury (SCI) using a powered exoskeleton for technically assisted mobility with regard to the achieved level of control of the system after training, user satisfaction, and effects on quality of life (QoL). Methods. Observational single centre study with a 4-week to 5-week intensive inpatient device-training using a powered exoskeleton (ReWalk™). Results. All 7 individuals with SCI who commenced the device-training completed the course of training and achieved basic competences to use the system, that is, the ability to stand up, sit down, keep balance while standing, and walk indoors, at least with a close contact guard. User satisfaction with the system and device-training was documented for several aspects. The quality of life evaluation (SF-12v2™) indicated that the use of the powered exoskeleton can have positive effects on the perception of individuals with SCI regarding what they can achieve physically. Few adverse events were observed: minor skin lesions and irritations were observed; no falls occurred. Conclusions. The device-training for individuals with thoracic and lumbar SCI was effective and safe. All trained individuals achieved technically assisted mobility with the exoskeleton while still needing a close contact guard. PMID:27610382

Optical design for a breadboard high-resolution spectrometer for SIRTF/IRS

NASA Astrophysics Data System (ADS)

Brown, Robert J.; Houck, James R.; van Cleve, Jeffrey E.

1996-11-01

The optical design of a breadboard high resolution infrared spectrometer for the IRS instrument on the SIRTF mission is discussed. The spectrometer uses a crossed echelle grating configuration to cover the spectral region from 10 to 20 micrometer with a resolving power of approximately equals 600. The all reflective spectrometer forms a nearly diffraction limited image of the two dimensional spectrum on a 128 multiplied by 128 arsenic doped silicon area array with 75 micrometer pixels. The design aspects discussed include, grating numerology, image quality, packaging and alignment philosophy.

Applications and research on nano power electronics: an adventure beyond quantum electronics

NASA Astrophysics Data System (ADS)

Chakraborty, Arindam; Emadi, Ali

2005-06-01

This paper is a roadmap to the exhaustive role of the newly emerging field of nanotechnology in various application and research areas. Some of the today's important topics are plasma, dielectric layer semiconductor, and carbon nanoparticle based technologies. Carbon nanotubes are very useful for the purpose of fabricating nano opto power devices. The basic concept behind tunneling of electrons has been utilized to define another scope of this technology, and thus came many quantum scale tunneling devices and elements. Fabrication of crystal semiconductors of high quality along with oxides of nano aspect would give rise to superior device performance and find applications such as LEDs, LASER, VLSI technology and also in highly efficient solar cells. Many nano-research based organizations are fully devoted to develop nano power cells, which would give birth to new battery cells, tunneling devises, with high power quality, longer lives, and higher activation rates. Different electronics industries as well as the military organizations would be largely benefited due to this major component and system design ideas of 'Smart Power' technologies. The contribution of nano scale power electronics would be realized in various fields like switching devices, electromechanical systems and quantum science. Such a sophisticated technology will have great impact on the modernization of robotics; space systems, automotive systems and many other fields. The highly emerging field of nanomedicine according to specialists would bring a dramatic revolution in the present century. However nanomedicine is nothing but an integration of biology, medicine and technology. Thermoelectric materials as been referred earlier also are used in case of implantable medical equipments for generation of electric power sufficient for those equipments.

Quality and Safety Aspects of Cereals (Wheat) and Their Products.

PubMed

Varzakas, Theo

2016-11-17

Cereals and, most specifically, wheat are described in this chapter highlighting on their safety and quality aspects. Moreover, wheat quality aspects are adequately addressed since they are used to characterize dough properties and baking quality. Determination of dough properties is also mentioned and pasta quality is also described in this chapter. Chemometrics-multivariate analysis is one of the analyses carried out. Regarding production weighing/mixing of flours, kneading, extruded wheat flours, and sodium chloride are important processing steps/raw materials used in the manufacturing of pastry products. Staling of cereal-based products is also taken into account. Finally, safety aspects of cereal-based products are well documented with special emphasis on mycotoxins, acrylamide, and near infrared methodology.

Multimodal Therapy Involving High-Intensity Interval Training Improves the Physical Fitness, Motor Skills, Social Behavior, and Quality of Life of Boys With ADHD: A Randomized Controlled Study.

PubMed

Meßler, Carolin Friederike; Holmberg, Hans-Christer; Sperlich, Billy

2018-06-01

To compare the effects of multimodal therapy including supervised high-intensity interval training (HIIT) with those of standard multimodal therapy (TRAD) concerning key variables of physical fitness (peak power and oxygen uptake), motor skills, social behavior, and quality of life in boys with ADHD. A single-center, two-arm randomized, controlled design was used, with 28 boys (8-13 years of age, IQ = 83-136) being randomly assigned to multimodal HIIT (three sessions/week, 4 × 4-min intervals at 95% of peak heart rate) or TRAD. The Movement Assessment Battery for Children II evaluated motor skills and the German version of the hyperkinetic disorder questionnaire for external evaluation by the guardians (FBB-HKS) or German version of the hyperkinetic disorder questionnaire for self-assessment by the children (SBB-HKS) and the KINDL-R questionnaires mental health and health-related quality of life. Both interventions enhanced peak power, and HIIT also reduced submaximal oxygen uptake. HIIT was more effective than TRAD in improving the total score for motor skills (including manual dexterity and ball skills; p < .05), self-esteem, friends, and competence ( p < .05) and, moreover, improved subjective ratings of attention. Three weeks of multimodal therapy including HIIT improved physical fitness, motor skills, certain aspects of quality of life, competence, and attention in boys with ADHD.

Change in quality of life and their predictors in the long-term follow-up after group cognitive behavioral therapy for social anxiety disorder: a prospective cohort study

PubMed Central

2010-01-01

Background Social anxiety disorder (SAD) is one of the most common anxiety disorders. The efficacy of cognitive behaviour therapy (CBT) has been examined but to date its effects on Quality of Life (QoL) have not been appropriately evaluated especially in the long term. The study aimed to examine, in the long term, what aspects of Quality of Life (QoL) changed among social anxiety disorder (SAD) patients treated with group cognitive behaviour therapy (CBT) and what predictors at baseline were associated with QoL. Methods Outpatients diagnosed with SAD were enrolled into group CBT, and assessed at follow-ups for up to 12 months in a typical clinical setting. QoL was evaluated using the Short Form 36. Various aspects of SAD symptomatology were also assessed. Each of the QoL domains and scores on symptomatology were quantified and compared with those at baseline. Baseline predictors of QoL outcomes at follow-up were investigated. Results Fifty-seven outpatients were enrolled into group CBT for SAD, 48 completed the whole program, and 44 and 40 completed assessments at the 3-month and 12-month follow-ups, respectively. All aspects of SAD symptomatology and psychological subscales of the QoL showed statistically significant improvement throughout follow-ups for up to 12 months. In terms of social functioning, no statistically significant improvement was observed at either follow-up point except for post-treatment. No consistently significant pre-treatment predictors were observed. Conclusions After group CBT, SAD symptomatology and some aspects of QoL improved and this improvement was maintained for up to 12 months, but the social functioning domain did not prove any significant change statistically. Considering the limited effects of CBT on QoL, especially for social functioning, more powerful treatments are needed. PMID:20942980

Validation of the self regulation questionnaire as a measure of health in quality of life research

PubMed Central

2009-01-01

Objectives Several epidemiological studies address psychosomatic 'self regulation' as a measure of quality of life aspects. However, although widely used in studies with a focus on complementary cancer treatment, and recognized to be associated with better survival of cancer patients, it is unclear what the 'self regulation' questionnaire exactly measures. Design and setting In a sample of 444 individuals (27% healthy, 33% cancer, 40% other internal diseases), we performed reliability and exploratory factor analyses, and correlated the 16-item instrument with external measures such as the Hospital Anxiety and Depression Scale, the Herdecke Quality of Life questionnaire, and autonomic regulation questionnaire. Results The 16-item pool had a very good internal consistency (Cronbach's alpha = 0.948) and satisfying/good (rrt = 0.796) test-retest reliability after 3 months. Exploratory factor analysis indicated 2 sub-constructs: (1) Ability to change behaviour in order to reach goals, and (2) Achieve satisfaction and well-being. Both sub-scales correlated well with quality of life aspects, particularly with Initiative Power/Interest, Social Interactions, Mental Balance, and negatively with anxiety and depression. Conclusions The Self Regulation Questionnaire (SRQ) was found to be a valid and reliable tool which measures unique psychosomatic abilities. Self regulation deals with competence and autonomy and can be regarded as a problem solving capacity in terms of an active adaptation to stressful situations to restore wellbeing. The tool is an interesting option to be used particularly in complementary medicine research with a focus on behavioural modification. PMID:19541580

Perceptions of patients and physiotherapists on patient participation: a narrative synthesis of qualitative studies.

PubMed

Schoeb, Veronika; Bürge, Elisabeth

2012-06-01

Patient participation is nowadays considered important for high quality patient care. Although the literature on health care professions provides some insights into this topic, specific aspects in the field of physiotherapy are less known. The objective of this review was to investigate how patients and physiotherapists perceive patient participation, especially in regards to what it means for them and the role patients play during physiotherapy treatment sessions. We used a narrative synthesis of qualitative studies. We conducted a systematic search in six databases using a set of key words, extracted relevant data, performed quality assessment and synthesized findings from the selected studies. Out of 160 studies, 11 were retained. Two main themes emerged: the conceptualization of patient participation and the patients' role preferences. Patient participation included various activities including goal setting, information exchange, decision-making and exercise training and often influenced the power relation between patient and physiotherapist. Patients' willingness to participate varied, and they often did not play their desired role. Patients and physiotherapists perceived participation to be valuable yet challenging. Problems of conceptualization, power inequalities, lack of health professionals' skills and lack of the right attitude to share power and responsibility from both sides were some of the barriers that impeded optimal participation. Copyright © 2011 John Wiley & Sons, Ltd.

Assessment of Health-Related Quality of Life after TBI: Comparison of a Disease-Specific (QOLIBRI) with a Generic (SF-36) Instrument

PubMed Central

von Steinbuechel, Nicole; Covic, Amra; Polinder, Suzanne; Kohlmann, Thomas; Cepulyte, Ugne; Poinstingl, Herbert; Backhaus, Joy; Bakx, Wilbert; Bullinger, Monika; Christensen, Anne-Lise; Formisano, Rita; Gibbons, Henning; Höfer, Stefan; Koskinen, Sanna; Maas, Andrew; Neugebauer, Edmund; Powell, Jane; Sarajuuri, Jaana; Sasse, Nadine; Schmidt, Silke; Mühlan, Holger; von Wild, Klaus; Zitnay, George; Truelle, Jean-Luc

2016-01-01

Psychosocial, emotional, and physical problems can emerge after traumatic brain injury (TBI), potentially impacting health-related quality of life (HRQoL). Until now, however, neither the discriminatory power of disease-specific (QOLIBRI) and generic (SF-36) HRQoL nor their correlates have been compared in detail. These aspects as well as some psychometric item characteristics were studied in a sample of 795 TBI survivors. The Shannon H ' index absolute informativity, as an indicator of an instrument's power to differentiate between individuals within a specific group or health state, was investigated. Psychometric performance of the two instruments was predominantly good, generally higher, and more homogenous for the QOLIBRI than for the SF-36 subscales. Notably, the SF-36 “Role Physical,” “Role Emotional,” and “Social Functioning” subscales showed less satisfactory discriminatory power than all other dimensions or the sum scores of both instruments. The absolute informativity of disease-specific as well as generic HRQoL instruments concerning the different groups defined by different correlates differed significantly. When the focus is on how a certain subscale or sum score differentiates between individuals in one specific dimension/health state, the QOLIBRI can be recommended as the preferable instrument. PMID:27022207

The quality of radiation care: the results of focus group interviews and concept mapping to explore the patient's perspective.

PubMed

Nijman, Jessica L; Sixma, Herman; van Triest, Baukelien; Keus, Ronald B; Hendriks, Michelle

2012-01-01

In this study, we explore the quality aspects of radiation care from the patient's perspective in order to develop a draft Consumer Quality Index (CQI) Radiation Care instrument. Four focus group discussions with (former) cancer patients were held to explore the aspects determining the quality of radiation care. The list of aspects generated was categorised based on similarity and importance in a concept mapping procedure. Four focus group discussions revealed seven main themes related to the quality of radiation care: information provision, a patient-centred approach, professional competence, planning and waiting times, accessibility, cooperation and communication, and follow-up care. Results of concept mapping procedures revealed which items the patients considered to be most important. A radiation oncologist who is up to date about the patient's file is of paramount importance for cancer patients receiving radiotherapy. The quality aspects found through focus group discussions provided useful insight into how patients experience radiation care. Furthermore, concept mapping made these results more solid. To evaluate the quality of radiation care from the patient's perspective, these quality aspects will be guiding in the development of a CQI Radiation Care. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Selective Laser Melting of Hot Gas Turbine Components: Materials, Design and Manufacturing Aspects

NASA Astrophysics Data System (ADS)

Goutianos, Stergios

2017-07-01

Selective Laser Melting (SLM) allows the design and manufacturing of novel parts and structures with improved performance e.g. by incorporating complex and more efficient cooling schemes in hot gas turbine parts. In contrast to conventional manufacturing of removing material, with SLM parts are built additively to nearly net shape. This allows the fabrication of arbitrary complex geometries that cannot be made by conventional manufacturing techniques. However, despite the powerful capabilities of SLM, a number of issues (e.g. part orientation, support structures, internal stresses), have to be considered in order to manufacture cost-effective and high quality parts at an industrial scale. These issues are discussed in the present work from an engineering point of view with the aim to provide simple quidelines to produce high quality SLM parts.

The algebra of healthcare reform: hospital-physician economic alignment.

PubMed

Goodroe, J H; Murphy, D A

1999-01-01

In summary the tertiary care programs in this nation are trapped in a difficult dilemma. On one side is the ongoing reduction in provider revenue driven by real and powerful market forces. On the other side is a traditional payment system governed by necessary laws that inhibit meaningful re-engineering of tertiary care delivery. If a remedy to this situation cannot be created then it is very likely that all aspects of quality as defined earlier will suffer. It is our hope that by very careful construction of a relationship, with attention to applicable statutes and careful measurement of utilization and quality, a limited business alignment of a hospital and a group of tertiary physicians can be approved in the care of Medicare, Medicaid and all federally funded patients.

Theoretical and experimental aspects of laser cutting with a direct diode laser

NASA Astrophysics Data System (ADS)

Costa Rodrigues, G.; Pencinovsky, J.; Cuypers, M.; Duflou, J. R.

2014-10-01

Recent developments in beam coupling techniques have made it possible to scale up the power of diode lasers with a laser beam quality suitable for laser cutting of metal sheets. In this paper a prototype of a Direct Diode Laser (DDL) source (BPP of 22 mm-mrad) is analyzed in terms of efficiency and cut performance and compared with two established technologies, CO2 and fiber lasers. An analytical model based on absorption calculations is used to predict the performance of the studied laser source with a good agreement with experimental results. Furthermore results of fusion cutting of stainless steel and aluminium alloys as well as oxygen cutting of structural steel are presented, demonstrating that industrial relevant cutting speeds with high cutting quality can now be achieved with DDL.

Recent progress in X-ray optics at the ESRF

NASA Astrophysics Data System (ADS)

Freund, A.

2003-03-01

It is the task of x-ray optics to adapt the raw beam generated by modern sources such as synchrotron storage rings to a great variety of experimental requirements in terms of intensity, spot size, polarization and other parameters. The very high quality of synchrotron radiation (source size of a few microns and beam divergence of a few micro-radians) and the extreme x-ray flux (power of several hundred Watts in a few square mm) make this task quite difficult. In particular the heat load aspect is very important in the conditioning process of the brute x-ray power. Cryogenically cooled silicon crystals and water-cooled diamond crystals can presently fulfil this task, but limits will soon be reached and new schemes and materials must be envisioned. A major tendency of instrument improvement has a ways been to concentrate more photons into a smaller spot utilizing a whole variety of focusing devices such as Fresnel zone plates, refractive lenses and Systems based on bent surfaces, for example Kirkpatrick-Baez Systems. Apart from the resistance of the sample, the ultimate limits are determined by the source size and strength on one side, by materials properties, cooling, mounting and bending schemes on the other side, and fundamentally by the diffraction process. There is also the important aspect of coherence that can be both a nuisance and a blessing for the experiments, in particular for imaging techniques. Its conservation puts additional constraints on the quality of the optical elements. A review of recent progress in this field is given.

Power subsystem automation study

NASA Technical Reports Server (NTRS)

Tietz, J. C.; Sewy, D.; Pickering, C.; Sauers, R.

1984-01-01

The purpose of the phase 2 of the power subsystem automation study was to demonstrate the feasibility of using computer software to manage an aspect of the electrical power subsystem on a space station. The state of the art in expert systems software was investigated in this study. This effort resulted in the demonstration of prototype expert system software for managing one aspect of a simulated space station power subsystem.

Faith Tribes as Powerful Communities of Adolescents in Highly Differentiated Societies

ERIC Educational Resources Information Center

van Wijnen, Harmen; Barnard, Marcel

2017-01-01

This article describes how communal aspects of faith find their way back into the lives of adolescents. The communal aspects of faith within individualized societies need more attention. It seems that with the current emphasis on individual faith, the intrinsic power of communal aspects of faith has been lost. This study shows that informal…

Development of Reasoning Test Instruments Based on TIMSS Framework for Measuring Reasoning Ability of Senior High School Student on the Physics Concept

NASA Astrophysics Data System (ADS)

Muslim; Suhandi, A.; Nugraha, M. G.

2017-02-01

The purposes of this study are to determine the quality of reasoning test instruments that follow the framework of Trends in International Mathematics and Science Study (TIMSS) as a development results and to analyse the profile of reasoning skill of senior high school students on physics materials. This research used research and development method (R&D), furthermore the subject were 104 students at three senior high schools in Bandung selected by random sampling technique. Reasoning test instruments are constructed following the TIMSS framework in multiple choice forms in 30 questions that cover five subject matters i.e. parabolic motion and circular motion, Newton’s law of gravity, work and energy, harmonic oscillation, as well as the momentum and impulse. The quality of reasoning tests were analysed using the Content Validity Ratio (CVR) and classic test analysis include the validity of item, level of difficulty, discriminating power, reliability and Ferguson’s delta. As for the students’ reasoning skills profiles were analysed by the average score of achievements on eight aspects of the reasoning TIMSS framework. The results showed that reasoning test have a good quality as instruments to measure reasoning skills of senior high school students on five matters physics which developed and able to explore the reasoning of students on all aspects of reasoning based on TIMSS framework.

Online, offline, realtime: recent developments in industrial photogrammetry

NASA Astrophysics Data System (ADS)

Boesemann, Werner

2003-01-01

In recent years industrial photogrammetry has emerged from a highly specialized niche technology to a well established tool in industrial coordinate measurement applications with numerous installations in a significantly growing market of flexible and portable optical measurement systems. This is due to the development of powerful, but affordable video and computer technology. The increasing industrial requirements for accuracy, speed, robustness and ease of use of these systems together with a demand for the highest possible degree of automation have forced universities and system manufacturer to develop hard- and software solutions to meet these requirements. The presentation will show the latest trends in hardware development, especially new generation digital and/or intelligent cameras, aspects of image engineering like use of controlled illumination or projection technologies, and algorithmic and software aspects like automation strategies or new camera models. The basic qualities of digital photogrammetry- like portability and flexibility on one hand and fully automated quality control on the other - sometimes lead to certain conflicts in the design of measurement systems for different online, offline, or real-time solutions. The presentation will further show, how these tools and methods are combined in different configurations to be able to cover the still growing demands of the industrial end-users.

Photogrammetry in the line: recent developments in industrial photogrammetry

NASA Astrophysics Data System (ADS)

Boesemann, Werner

2003-05-01

In recent years industrial photogrammetry has emerged from a highly specialized niche technology to a well established tool in industrial coordinate measurement applications with numerous installations in a significantly growing market of flexible and portable optical measurement systems. This is due to the development of powerful, but affordable video and computer technology. The increasing industrial requirements for accuracy, speed, robustness and ease of use of these systems together with a demand for the highest possible degree of automation have forced universities and system manufacturers to develop hard- and software solutions to meet these requirements. The presentation will show the latest trends in hardware development, especially new generation digital and/or intelligent cameras, aspects of image engineering like use of controlled illumination or projection technologies,and algorithmic and software aspects like automation strategies or new camera models. The basic qualities of digital photogrammetry-like portability and flexibility on one hand and fully automated quality control on the other -- sometimes lead to certain conflicts in the design of measurement systems for different online, offline or real-time solutions. The presentation will further show, how these tools and methods are combined in different configurations to be able to cover the still growing demands of the industrial end-users.

Power quality improvement by using STATCOM control scheme in wind energy generation interface to grid

NASA Astrophysics Data System (ADS)

Kirmani, Sheeraz; Kumar, Brijesh

2018-01-01

“Electric Power Quality (EPQ) is a term that refers to maintaining the near sinusoidal waveform of power distribution bus voltages and currents at rated magnitude and frequency”. Today customers are more aware of the seriousness that the power quality possesses, this prompt the utilities to assure good quality of power to their customer. The power quality is basically customer centric. Increased focus of utilities toward maintaining reliable power supply by employing power quality improvement tools has reduced the power outages and black out considerably. Good power quality is the characteristic of reliable power supply. Low power factor, harmonic pollution, load imbalance, fast voltage variations are some common parameters which are used to define the power quality. If the power quality issues are not checked i.e. the parameters that define power quality doesn't fall within the predefined standards than it will lead into high electricity bill, high running cost in industries, malfunctioning of equipments, challenges in connecting renewable. Capacitor banks, FACTS devices, harmonic filters, SVC’s (static voltage compensators), STATCOM (Static-Compensator) are the solutions to achieve the power quality. The performance of Wind turbine generators is affected by poor quality power, at the same time these wind power generating plant affects the power quality negatively. This paper presents the STATCOM-BESS (battery energy storage system) system and studies its impact on the power quality in a system which consists of wind turbine generator, non linear load, hysteresis controller for controlling the operation of STATCOM and grid. The model is simulated in the MATLAB/Simulink. This scheme mitigates the power quality issues, improves voltage profile and also reduces harmonic distortion of the waveforms. BESS level out the imbalances caused in real power due to intermittent nature of wind power available due to varying wind speeds.

Empowerment in nurse leader groups in middle management: a quantitative comparative investigation.

PubMed

Spencer, Caroline; McLaren, Susan

2017-01-01

The aim was to investigate structural empowerment in nurse leaders in middle management positions. Objectives were to determine levels of empowerment of nurse leaders and to compare levels of empowerment between nurse leader groups. Access to formal and informal power, opportunity, resources, information and support are determinants of structural empowerment. Empowerment of nurse leaders in middle management positions is vital given their roles in enabling nursing teams to deliver high-quality care, benefitting both patient and workforce outcomes. Quantitative component of a mixed methods study using survey principles. The Conditions of Work Effectiveness Questionnaire II was distributed to the total population (n = 517) of nurse leaders in an NHS Foundation Trust in England. Nurse leader groups comprised unit leaders (sisters, matrons) and senior staff nurses. Quantitative data entered on spss v 17/18, were analysed using descriptive and inferential statistics. Overall, the unit response rate was 44·1% (n = 228). Levels of total and global empowerment were moderate and moderate to high respectively. Groups did not differ significantly on these parameters or on five elements of total empowerment, but significantly higher scores were found for unit leaders' access to information. Significantly higher scores were found for senior staff nurses on selected aspects of informal power and access to resources, but scores were significantly lower than unit leaders for components of support. A moderately empowered population of nurse leaders differed in relation to access to information, aspects of support, resources and informal power, reflecting differences in roles, spheres of responsibility, hierarchical position and the constraints on empowerment imposed on unit leaders by financial and resource pressures. Empowerment of nurse leaders in middle management is vital in enabling nursing teams to deliver high-quality care. Roles, spheres of responsibility, hierarchical position and constraints imposed by financial and resource pressures influence nurse leader empowerment. Administrative support is needed to sustain practice engagement. © 2016 John Wiley & Sons Ltd.

Power quality analysis based on spatial correlation

NASA Astrophysics Data System (ADS)

Li, Jiangtao; Zhao, Gang; Liu, Haibo; Li, Fenghou; Liu, Xiaoli

2018-03-01

With the industrialization and urbanization, the status of electricity in the production and life is getting higher and higher. So the prediction of power quality is the more potential significance. Traditional power quality analysis methods include: power quality data compression, disturbance event pattern classification, disturbance parameter calculation. Under certain conditions, these methods can predict power quality. This paper analyses the temporal variation of power quality of one provincial power grid in China from time angle. The distribution of power quality was analyzed based on spatial autocorrelation. This paper tries to prove that the research idea of geography is effective for mining the potential information of power quality.

Effective interventions on service quality improvement in a physiotherapy clinic.

PubMed

Gharibi, Farid; Tabrizi, JafarSadegh; Eteraf Oskouei, MirAli; AsghariJafarabadi, Mohammad

2014-01-01

Service quality is considered as a main domain of quality associ-ated with non-clinical aspect of healthcare. This study aimed to survey and im-proves service quality of delivered care in the Physiotherapy Clinic affiliated with the Tabriz University of Medical Sciences, Tabriz, Iran. A quasi experimental interventional study was conducted in the Physiotherapy Clinic, 2010-2011. Data were collected using a validated and reli-able researcher made questionnaire with participation of 324 patients and their coadjutors. The study questionnaire consisted of 7 questions about demographic factors and 38 questions for eleven aspects of service quality. Data were then analyzed using paired samples t-test by SPSS16. In the pre intervention phase, six aspects of service quality including choice of provider, safety, prevention and early detection, dignity, autonomy and availability achieved non-acceptable scores. Following interventions, all aspects of the service quality improved and also total service quality score improved from 8.58 to 9.83 (P<0.001). Service quality can be improved by problem implementation of appropriate interventions. The acquired results can be used in health system fields to create respectful environments for healthcare customers.

Electrical Power Conversion of a River and Tidal Power Generator: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard; Gevorgian, Vahan; Wright, Alan

As renewable generation has become less expensive during recent decades, and it becomes more accepted by the global population, the focus on renewable generation has expanded to include new types with promising future applications, such as river and tidal generation. Although the utilization of power electronics and electric machines in industry is phenomenal, the emphasis on system design is different for various sectors of industry. In precision control, robotics, and weaponry, the design emphasis is on accuracy and reliability with less concern for the cost of the final product. In energy generation, the cost of energy is the prime concern;more » thus, capital expenditures (CAPEX) and operations and maintenance expenditures (OPEX) are the major design objectives. This paper describes the electrical power conversion aspects of river and tidal generation. Although modern power converter control is available to control the generation side, the design was chosen on the bases of minimizing the CAPEX and OPEX; thus, the architecture is simple and modular for ease of replacement and maintenance. The power conversion is simplified by considering a simple diode bridge and a DC-DC power converter to take advantage of abundant and low-cost photovoltaic inverters that have well-proven grid integration characteristics (i.e., the capability to produce energy with good power quality and control real power and voltage on the grid side).« less

Electrical Power Conversion of River and Tidal Power Generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard; Gevorgian, Vahan; Wright, Alan

As renewable generation has become less expensive during recent decades, and it becomes more accepted by the global population, the focus on renewable generation has expanded to include new types with promising future applications, such as river and tidal generation. Although the utilization of power electronics and electric machines in industry is phenomenal, the emphasis on system design is different for various sectors of industry. In precision control, robotics, and weaponry, the design emphasis is on accuracy and reliability with less concern for the cost of the final product. In energy generation, the cost of energy is the prime concern;more » thus, capital expenditures (CAPEX) and operations and maintenance expenditures (OPEX) are the major design objectives. This paper describes the electrical power conversion aspects of river and tidal generation. Although modern power converter control is available to control the generation side, the design was chosen on the bases of minimizing the CAPEX and OPEX; thus, the architecture is simple and modular for ease of replacement and maintenance. The power conversion is simplified by considering a simple diode bridge and a DC-DC power converter to take advantage of abundant and low-cost photovoltaic inverters that have well-proven grid integration characteristics (i.e., the capability to produce energy with good power quality and control real power and voltage on the grid side).« less

Adopting software quality measures for healthcare processes.

PubMed

Yildiz, Ozkan; Demirörs, Onur

2009-01-01

In this study, we investigated the adoptability of software quality measures for healthcare process measurement. Quality measures of ISO/IEC 9126 are redefined from a process perspective to build a generic healthcare process quality measurement model. Case study research method is used, and the model is applied to a public hospital's Entry to Care process. After the application, weak and strong aspects of the process can be easily observed. Access audibility, fault removal, completeness of documentation, and machine utilization are weak aspects and these aspects are the candidates for process improvement. On the other hand, functional completeness, fault ratio, input validity checking, response time, and throughput time are the strong aspects of the process.

High-precision laser microcutting and laser microdrilling using diffractive beam-splitting and high-precision flexible beam alignment

NASA Astrophysics Data System (ADS)

Zibner, F.; Fornaroli, C.; Holtkamp, J.; Shachaf, Lior; Kaplan, Natan; Gillner, A.

2017-08-01

High-precision laser micro machining gains more importance in industrial applications every month. Optical systems like the helical optics offer highest quality together with controllable and adjustable drilling geometry, thus as taper angle, aspect ratio and heat effected zone. The helical optics is based on a rotating Dove-prism which is mounted in a hollow shaft engine together with other optical elements like wedge prisms and plane plates. Although the achieved quality can be interpreted as extremely high the low process efficiency is a main reason that this manufacturing technology has only limited demand within the industrial market. The objective of the research studies presented in this paper is to dramatically increase process efficiency as well as process flexibility. During the last years, the average power of commercial ultra-short pulsed laser sources has increased significantly. The efficient utilization of the high average laser power in the field of material processing requires an effective distribution of the laser power onto the work piece. One approach to increase the efficiency is the application of beam splitting devices to enable parallel processing. Multi beam processing is used to parallelize the fabrication of periodic structures as most application only require a partial amount of the emitted ultra-short pulsed laser power. In order to achieve highest flexibility while using multi beam processing the single beams are diverted and re-guided in a way that enables the opportunity to process with each partial beam on locally apart probes or semimanufactures.

Social and cultural meanings of self-efficacy.

PubMed

Burke, Nancy J; Bird, Joyce A; Clark, Melissa A; Rakowski, William; Guerra, Claudia; Barker, Judith C; Pasick, Rena J

2009-10-01

This article describes the influences of social context on women's health behavior through illustration of the powerful influences of social capital (the benefits and challenges that accrue from participation in social networks and groups) on experiences and perceptions of self-efficacy. The authors conducted inductive interviews with Latino and Filipino academics and social service providers and with U.S.-born and immigrant Latinas and Filipinas to explore direct and indirect influences of social context on health behaviors such as mammography screening. Iterative thematic analysis identified themes (meanings of efficacy, spheres of efficacy, constraints on efficacy, sources of social capital, and differential access to and quality of social capital) that link the domain of social capital with the behavioral construct perceived self-efficacy. The authors conclude that social capital addresses aspects of social context absent in the current self-efficacy construct and that these aspects have important implications for scholars' and practitioners' understandings of health behavior and intervention development.

Economic Aspects of the Chemical Industry

NASA Astrophysics Data System (ADS)

Koleske, Joseph V.

Within the formal disciplines of science at traditional universities, through the years, chemistry has grown to have a unique status because of its close correspondence with an industry and with a branch of engineering—the chemical industry and chemical engineering. There is no biology industry, but aspects of biology have closely related disciplines such as fish raising and other aquaculture, animal cloning and other facets of agriculture, ethical drugs of pharmaceutical manufacture, genomics, water quality and conservation, and the like. Although there is no physics industry, there are power generation, electricity, computers, optics, magnetic media, and electronics that exist as industries. However, in the case of chemistry, there is a named industry. This unusual correspondence no doubt came about because in the chemical industry one makes things from raw materials—chemicals—and the science, manufacture, and use of chemicals grew up together during the past century or so.

Quality and comparison of antenatal care in public and private providers in the United Republic of Tanzania.

PubMed Central

Boller, Christoph; Wyss, Kaspar; Mtasiwa, Deo; Tanner, Marcel

2003-01-01

OBJECTIVE: To compare the quality of public and private first-tier antenatal care services in Dar es Salaam, United Republic of Tanzania, using defined criteria. METHODS: Structural attributes of quality were assessed through a checklist, and process attributes, including interpersonal and technical aspects, through observation and exit interviews. A total of 16 health care providers, and 166 women in the public and 188 in the private sector, were selected by systematic random sampling for inclusion in the study. Quality was measured against national standards, and an overall score calculated for the different aspects to permit comparison. FINDINGS: The results showed that both public and private providers were reasonably good with regard to the structural and interpersonal aspects of quality of care. However, both were poor when it came to technical aspects of quality. For example, guidelines for dispensing prophylactic drugs against anaemia or malaria were not respected, and diagnostic examinations for the assessment of gestation, anaemia, malaria or urine infection were frequently not performed. In all aspects, private providers were significantly better than public ones. CONCLUSION: Approaches to improving quality of care should emerge progressively as a result of regular quality assessments. Changes should be introduced using an incremental approach addressing few improvements at a time, while ensuring participation in, and ownership of, every aspect of the strategy by health personnel, health planners and managers and also the community. PMID:12751419

A Low-Cost and Energy-Efficient Multiprocessor System-on-Chip for UWB MAC Layer

NASA Astrophysics Data System (ADS)

Xiao, Hao; Isshiki, Tsuyoshi; Khan, Arif Ullah; Li, Dongju; Kunieda, Hiroaki; Nakase, Yuko; Kimura, Sadahiro

Ultra-wideband (UWB) technology has attracted much attention recently due to its high data rate and low emission power. Its media access control (MAC) protocol, WiMedia MAC, promises a lot of facilities for high-speed and high-quality wireless communication. However, these benefits in turn involve a large amount of computational load, which challenges the traditional uniprocessor architecture based implementation method to provide the required performance. However, the constrained cost and power budget, on the other hand, makes using commercial multiprocessor solutions unrealistic. In this paper, a low-cost and energy-efficient multiprocessor system-on-chip (MPSoC), which tackles at once the aspects of system design, software migration and hardware architecture, is presented for the implementation of UWB MAC layer. Experimental results show that the proposed MPSoC, based on four simple RISC processors and shared-memory infrastructure, achieves up to 45% performance improvement and 65% power saving, but takes 15% less area than the uniprocessor implementation.

The political economy of infant mortality in São Paulo, Brazil.

PubMed

Wood, C H

1982-01-01

After the military took power in Brazil in 1964, the government adopted a wide range of policies designed to stimulate economic growth. A central aspect of the Brazilian model of development was the control of wages. From 1964 to 1975 this strategy caused the purchasing power of the minimum wage in the city of Säo Paulo to fall. The decline in the real wage index was associated with a rise in infant mortality during the period. When real wages rose after 1974, the death rate dropped off. The infant mortality trend cannot be explained by other factors that affect the actual or the reported death rate, such as changes in cityward migration, shifts in the distribution of income, and improvements in the quality of vital statistics. The findings of this study indicate a causal relationship between the infant mortality trend and changes in the purchasing power of the urban poor. Additional data on nutrition, changes in household behavior, and shifts in the cause structure of mortality support this conclusion.

Soft-lithography fabrication of microfluidic features using thiol-ene formulations.

PubMed

Ashley, John F; Cramer, Neil B; Davis, Robert H; Bowman, Christopher N

2011-08-21

In this work, a novel thiol-ene based photopolymerizable resin formulation was shown to exhibit highly desirable characteristics, such as low cure time and the ability to overcome oxygen inhibition, for the photolithographic fabrication of microfluidic devices. The feature fidelity, as well as various aspects of the feature shape and quality, were assessed as functions of various resin attributes, particularly the exposure conditions, initiator concentration and inhibitor to initiator ratio. An optical technique was utilized to evaluate the feature fidelity as well as the feature shape and quality. These results were used to optimize the thiol-ene resin formulation to produce high fidelity, high aspect ratio features without significant reductions in feature quality. For structures with aspect ratios below 2, little difference (<3%) in feature quality was observed between thiol-ene and acrylate based formulations. However, at higher aspect ratios, the thiol-ene resin exhibited significantly improved feature quality. At an aspect ratio of 8, raised feature quality for the thiol-ene resin was dramatically better than that achieved by using the acrylate resin. The use of the thiol-ene based resin enabled fabrication of a pinched-flow microfluidic device that has complex channel geometry, small (50 μm) channel dimensions, and high aspect ratio (14) features. This journal is © The Royal Society of Chemistry 2011

[On quality of life of children of senior school age in the Republic of Udmurtia].

PubMed

Vikhareva, E G; Viniarskaia, I V; Khan, M A; Tretiakova, T V; Chernikov, V V

2016-01-01

The article presents results of population study of quality of life of children aged 2-17 years. The study of quality of life of children of senior school age using questionnaire PedsQL was carried out. The comparative characteristic of indices of quality of life of children ofjunior and senior school age in the Republic of Udmurtia is presented. The regional indices of quality of life of children of senior school age are determined. Among all aspects of quality of life the highest values had «physical functioning» and «social functioning». The scales «emotional functioning» and «social functioning» differed by their lesser level. The quality of life of girls of senior school age was lower than in boys in all aspects but more concerned emotional sphere. The residence in urban or rural territory effects indices of quality of life of children of senior school age in Udmurtia. The urban children had higher indices of quality of life on aspects «physical functioning» and «emotional functioning». The level of aspects of «social functioning» and «school functioning» is characterized by absence of disagreements between urban and rural children. The geographical area of residing of children of senior school age in Udmurtia has no effect on indices of quality of life. The aspects of «social functioning», «emotional functioning» and «school functioning» have particular characteristics depending on age (8-12 years and 13-17 years). The age characteristics consist in increasing of level of social functioning; age trend of aspects «emotional functioning» and «school functioning» has negative dynamics.

Fundamentals and advances in magnetic hyperthermia

NASA Astrophysics Data System (ADS)

Périgo, E. A.; Hemery, G.; Sandre, O.; Ortega, D.; Garaio, E.; Plazaola, F.; Teran, F. J.

2015-12-01

Nowadays, magnetic hyperthermia constitutes a complementary approach to cancer treatment. The use of magnetic particles as heating mediators, proposed in the 1950s, provides a novel strategy for improving tumor treatment and, consequently, patient's quality of life. This review reports a broad overview about several aspects of magnetic hyperthermia addressing new perspectives and the progress on relevant features such as the ad hoc preparation of magnetic nanoparticles, physical modeling of magnetic heating, methods to determine the heat dissipation power of magnetic colloids including the development of experimental apparatus and the influence of biological matrices on the heating efficiency.

Environmental Aspects of Two Volatile Organic Compound Groundwater Treatment Designs at the Rocky Flats Site - 13135

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalski, Casey C.; DiSalvo, Rick; Boylan, John

2013-07-01

DOE's Rocky Flats Site in Colorado is a former nuclear weapons production facility that began operations in the early 1950's. Because of releases of hazardous substances to the environment, the federally owned property and adjacent offsite areas were placed on the CERCLA National Priorities List in 1989. The final remedy was selected in 2006. Engineered components of the remedy include four groundwater treatment systems that were installed before closure as CERCLA-accelerated actions. Two of the systems, the Mound Site Plume Treatment System and the East Trenches Plume Treatment System, remove low levels of volatile organic compounds using zero-valent iron media,more » thereby reducing the loading of volatile organic compounds in surface water resulting from the groundwater pathway. However, the zero-valent iron treatment does not reliably reduce all volatile organic compounds to consistently meet water quality goals. While adding additional zero-valent iron media capacity could improve volatile organic compound removal capability, installation of a solar powered air-stripper has proven an effective treatment optimization in further reducing volatile organic compound concentrations. A comparison of the air stripper to the alternative of adding additional zero-valent iron capacity to improve Mound Site Plume Treatment System and East Trenches Plume Treatment System treatment based on several key sustainable remediation aspects indicates the air stripper is also more 'environmentally friendly'. These key aspects include air pollutant emissions, water quality, waste management, transportation, and costs. (authors)« less

Review of power requirements for satellite remote sensing systems

NASA Technical Reports Server (NTRS)

Morain, Stanley A.

1988-01-01

The space environment offers a multitude of attributes and opportunities to be used to enhance human life styles and qualities of life for all future generations, worldwide. Among the prospects having immense social as well as economic benefits are earth-observing systems capable of providing near real-time data in such areas as food and fiber production, marine fisheries, ecosystem monitoring, disaster assessment, and global environmental exchanges. The era of Space Station, the Shuttle program, the planned unmanned satellites in both high and low Earth orbit will transfer to operational status what, until now, has been largely research and development proof of concept for remotely sensing Earth's natural and cultural resources. An important aspect of this operational status focuses on the orbital designs and power requirements needed to optimally sense any of these important areas.

Assessment and mitigation of power quality problems for PUSPATI TRIGA Reactor (RTP)

NASA Astrophysics Data System (ADS)

Zakaria, Mohd Fazli; Ramachandaramurthy, Vigna K.

2017-01-01

An electrical power systems are exposed to different types of power quality disturbances. Investigation and monitoring of power quality are necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. This paper will discuss the power quality problems observed at the electrical sources of PUSPATI TRIGA Reactor (RTP). Assessment of power quality requires the identification of any anomalous behavior on a power system, which adversely affects the normal operation of electrical or electronic equipment. A power quality assessment involves gathering data resources; analyzing the data (with reference to power quality standards) then, if problems exist, recommendation of mitigation techniques must be considered. Field power quality data is collected by power quality recorder and analyzed with reference to power quality standards. Normally the electrical power is supplied to the RTP via two sources in order to keep a good reliability where each of them is designed to carry the full load. The assessment of power quality during reactor operation was performed for both electrical sources. There were several disturbances such as voltage harmonics and flicker that exceeded the thresholds. To reduce these disturbances, mitigation techniques have been proposed, such as to install passive harmonic filters to reduce harmonic distortion, dynamic voltage restorer (DVR) to reduce voltage disturbances and isolate all sensitive and critical loads.

Model testing on the crisis interventions and actions to prevent medical disputes: a Taiwanese nursing perspective.

PubMed

Tzeng, Huey-Ming

2006-05-01

This study investigated the contributions of comprehensiveness and necessity scales on crisis interventions and actions toward nursing practice-related medical disputes in Taiwanese hospitals and institutions' demographic characteristics, to overall satisfaction toward nursing-related crisis management policies and interventions and overall satisfaction toward their institution's crisis management system. In a health-care environment that is focused on cost containment, for overworked nurses and understaffed medical wards, patients still expect nurses to provide high quality, compassionate care. Patients usually regard nurses as the principal link between the technical and interpersonal aspects of their care. However, current hospital systems tend to require patients to be self-reliant in managing their own care. Patient mistrust of medical care providers might have contributed to the current medical error/dispute crisis. In this cross-sectional study, the subjects were nursing directors of Taiwanese hospitals (197 valid subjects). The author developed the questionnaire used in this study. The ordinal logistic regression analyses demonstrated that being a public hospital managed by the government, being a hospital operated by a corporate body, the more comprehensive the technical/structural aspect and the assessment aspect and the more needed the psychological aspect, contribute to higher general satisfaction levels toward nursing-related crisis management. The more comprehensive the strategic aspect and having more acute beds, contributes to higher satisfaction levels with their institution's overall crisis management activities. These findings inferred a possible change in a hospital's resource allocation or power structure when dealing with issues of patient care quality, including nursing practice-related crisis management policies, interventions and actions. RELEVANT TO CLINICAL PRACTICE: A good crisis management system may help to keep a crisis from worsening, which might lead to a serious situation that includes malpractice litigation. It is believed that the questionnaire used in this study may be used as a diagnostic tool for assessing a crisis management system within a hospital's nursing environment.

Patient's Perspective on Quality of Teleconsultation Services.

PubMed

Thijssing, Leonie; Tensen, Esmée; Jaspers, Monique

2016-01-01

Patient satisfaction with teleconsultation services can increase their acceptance. Validated and standardized questionnaires to measure the quality aspects of teleconsultation relevant from the patients' perspective are not available yet. We aim to develop such a questionnaire. First, a systematic literature search was performed and focus groups were held to acquire quality aspects of teleconsultations patients perceive as important. Thirty-seven unique quality aspects distilled from these activities, were used for questionnaire development based on the framework of the Consumer Quality Index. In future research, the comprehensiveness, relevance and unambiguousness of the concept questionnaire need to be tested and the reliability and internal cohesion of the questionnaire assessed.

Current Developments and Unusual Aspects in Gastrointestinal Surgical Stapling.

PubMed

Frattini, Francesco; Amico, Francesco; Rausei, Stefano; Boni, Luigi; Rovera, Francesca; Dionigi, Gianlorenzo

2015-11-01

Stapling devices are used in gastrointestinal, gynecologic, thoracic, and many other surgeries to resect organs, transect tissues, and anastomose different structures. These devices became widely accepted standard practice in many gastrointestinal operations, especially since the successful advent of minimally invasive surgery. Despite the relevant advantages related to the use of a surgical stapler, we must also consider that these instruments may be at risk of failure. When any component fails, the patient is at risk of operative morbidity. Gastrointestinal surgical stapling technique still needs refinement in order to increase its reliability. Staple line reinforcement has been widely used and seems to effectively reduce anastomotic complications. Literature provides us with examples of studies supporting both bleeding and leakage reduction after staple line reinforcement, but high-quality evidence is not available to date. Semi-absorbable and nonabsorbable materials have been the earliest available. The use of bioabsorbable staple line reinforcement materials has recently become more widespread, and these materials are more widely used these days. Powered staplers were made available to the market some time ago and represent a rather unheard of aspect of endosurgical stapling. Despite powered staples being supposedly convenient compared with manual ones only one relevant article was found when searching the U.S. National Library of Medicine for "powered stapler." New surgical stapling devices are constantly developed and introduced on the market. Results with such devices depend on the stapler features but also surely vary according to the surgeon experience.

[Cross-cultural adaptation of the Quality of Life Index Spinal Cord Injury - Version III].

PubMed

Reis, Priscila Alencar Mendes; Carvalho, Zuila Maria de Figueiredo; Tirado Darder, Juan José; Oriá, Mônica Oliveira Batista; Studart, Rita Mônica Borges; Maniva, Samia Jardelle Costa de Freitas

2015-06-01

To translate and culturally adapt to Portuguese the Ferrans and Powers Quality of Life Index Spinal Cord Injury - Version III and characterize the sample in relation to sociodemographic and clinical aspects. A methodological study with view to cross-cultural adaptation, following the particular steps of this method: initial translation, translation synthesis, back-translation (translation back to the original language), review by a committee of judges and pretest of the final version. The pretest was carried out with 30 patients with spinal cord injury. An index of 74 items divided into two parts (satisfaction/importance) was obtained. The criteria of semantic equivalence were evaluated as very adequate translation, higher than 87%, and vocabulary and were grammar higher than 86%. Idiomatic equivalence was higher than 74%, experimental greater than 78% and conceptual was greater than 70%. After cross-cultural adaptation, the instrument proved semantic, idiomatic, experimental and conceptual adequacy, in addition to helping the evaluation of the quality of life of people with spinal cord injury.

Analysis of typical world countries' wind power and PV industry policies and their enlightenment to China

NASA Astrophysics Data System (ADS)

Zeng, Ming; Yang, Lijun; Qiu, Hongji; Li, Yuanfei; Peng, Lilin

2017-01-01

The wind power and PV are the key fields of clean energy development in China in recent years. However, there are still many aspects of problems in wind power and PV industries at present, such as the insufficient consumptive ability and the limitation of market competition capability. The effective leading and support of government in the aspect of policies is especially needed in order to solve these problems. Based on the analysis of main policies system of wind power and PV in our country, Spain, the United Kingdom and Germany are chosen as typical countries because of their wind power and PV industries are relatively developed. Their policies of wind power and PV industries are studied respectively from five aspects, namely macroscopic laws, development planning, administrative policies, fiscal and tax policies and price policies. Then the comparison among typical countries and China is made and the exiting problems in China's policies of wind power and PV industries are summed up. Finally, the suggestions to promote China's wind power and PV industries development are presented.

Systems aspects of a space nuclear reactor power system

NASA Technical Reports Server (NTRS)

Jaffe, L.; Fujita, T.; Beatty, R.; Bhandari, P.; Chow, E.; Deininger, W.; Ewell, R.; Grossman, M.; Bloomfield, H.; Heller, J.

1988-01-01

Various system aspects of a 300-kW nuclear reactor power system for spacecraft have been investigated. Special attention is given to the cases of a reusable OTV and a space-based radar. It is demonstrated that the stowed length of the power system is important to mission design, and that orbital storage for months to years may be needed for missions involving orbital assembly.

Practical considerations for obtaining high quality quantitative computed tomography data of the skeletal system.

PubMed

Troy, Karen L; Edwards, W Brent

2018-05-01

Quantitative CT (QCT) analysis involves the calculation of specific parameters such as bone volume and density from CT image data, and can be a powerful tool for understanding bone quality and quantity. However, without careful attention to detail during all steps of the acquisition and analysis process, data can be of poor- to unusable-quality. Good quality QCT for research requires meticulous attention to detail and standardization of all aspects of data collection and analysis to a degree that is uncommon in a clinical setting. Here, we review the literature to summarize practical and technical considerations for obtaining high quality QCT data, and provide examples of how each recommendation affects calculated variables. We also provide an overview of the QCT analysis technique to illustrate additional opportunities to improve data reproducibility and reliability. Key recommendations include: standardizing the scanner and data acquisition settings, minimizing image artifacts, selecting an appropriate reconstruction algorithm, and maximizing repeatability and objectivity during QCT analysis. The goal of the recommendations is to reduce potential sources of error throughout the analysis, from scan acquisition to the interpretation of results. Copyright © 2018 Elsevier Inc. All rights reserved.

Temporal Aspects of the V[o.sub.2] Response at the Power Output Associated with V[o.sub.2]peak in Well Trained Cyclists-Implications for Interval Training Prescription

ERIC Educational Resources Information Center

Laursen, Paul B.; Shing, Cecilia M.; Jenkins, David G.

2004-01-01

The power output achieved at peak oxygen consumption (V[O.sub.2]peak) and the time this power can be maintained (i.e., Tmax) have been used in prescribing high-intensity interval training. In this context, the present study examined temporal aspects of the V[O.sub.2] response to exercise at the cycling power that output well trained cyclists…

Is the Use of Information and Communication Technology Associated With Aspects of Women's Primary Health Care in Brazil?

PubMed

Matta-Machado, Antônio Thomaz Gonzaga; de Lima, Ângela Maria L Dayrell; de Abreu, Daisy Maria Xavier; Araújo, Lucas Lobato; Sobrinho, Délcio Fonseca; Silva Lopes, Érica Araújo; Teixeira, Gabriel Henrique Silva; Dos Santos, Alaneir de Fátima

The use of information and communication technology (ICT) is on the increase in the health systems, representing a means of improving the quality of health care. This study analyzed the ICT incorporation in primary care in Brazil and identified the different aspects that may be associated with better quality in the care provided, in relation to certain aspects of women's care. We noted an unevenness regarding ICT incorporation in Brazil. However, the findings indicate an association between ICT and certain aspects of the quality provided in women's health care, which reinforces the need for further studies on this type of evaluation.

Positive and Negative Aspects of Relationship Quality and Unprotected Sex among Young Women.

PubMed

Brady, Sonya S; Gruber, Sandra K; Wolfson, Julian A

2016-01-01

The aim of this study was to examine both positive and negative aspects of relationship quality in relation to condom use. Sexually active young women aged 14-18 years (n=111; 34% non-white) were recruited from community clinics and schools in the Midwest USA and provided data via an online survey. The number of unprotected sex acts in the past month with the most recent male partner was regressed on relationship quality with that partner, adjusting for demographics and other characteristics. Negative relationship quality was associated with a greater number of unprotected sex acts among women reporting a low level of positive relationship quality and among women taking hormonal/IUD contraception. Positive relationship quality was associated with unprotected sex among women who reported multiple partners in the past month. Both positive and negative aspects of relationship quality may confer risk for unprotected sex. This risk appears modified by patterns of contraceptive use and other sexual behaviours. Health professionals may be more effective in promoting condom use if they ask questions about both positive and negative aspects of young people's relationship quality and tailor their conversations based on the responses received.

Analysis of laser pumping and thermal effects based on element analysis

NASA Astrophysics Data System (ADS)

Cui, Li; Liu, Zhijia; Zhang, Yizhuo; Han, Juan

2018-03-01

Thermal effect is a plateau that limits the output of high-power, high beam quality laser, and thermal effects become worse with the increase of pump power. We can reduce the effects caused by thermal effects from pumping, laser medium shape, cooling method and other aspects. In this article, by using finite element analysis software, the thermal effects between Nd:Glass and Nd:YAG laser crystal was analyzed and compared. The causes of generation for thermal effects, and factors that influence the distribution in laser medium were analyzed, including the light source, the laser medium shape and the working mode. Nd:Glass is more suitable for low repetition frequency, high energy pulsed laser output, due to its large size, line width and so on, and Nd:YAG is more suitable for continue or high repetition rate laser output, due to its higher thermal conductivity.

Using smartphones and tablet PCs for β--spectroscopy in an educational experimental setup

NASA Astrophysics Data System (ADS)

Gröber, Sebastian; Molz, Alexander; Kuhn, Jochen

2014-11-01

A magnetic spectrometer is used to gather the β--spectrum of 90 Sr /Y with a focus on two aspects. (1) The intensity of β--radiation is measured by the camera sensor module of a tablet PC together with the RadioactivityCounter app and by a Geiger-Müller tube. We evaluate the quality of mobile devices as radioactive radiation detectors by using polyenergetic β--radiation as an example and by comparing the spectra measured with the two detector types. (2) For educational purposes we implement a simple experimental setup, which consists of separate devices for measuring the electron’s kinetic energy and intensity, which are available in laboratories in educational settings. Comparison of the measured β--spectra published in the literature should encourage students to think about the energy resolution power of the β--spectrometer. Theoretical considerations show the low, yet sufficient energy resolution power of this spectrometer, especially for low energy levels.

Forging the Basis for Developing Protein-Ligand Interaction Scoring Functions.

PubMed

Liu, Zhihai; Su, Minyi; Han, Li; Liu, Jie; Yang, Qifan; Li, Yan; Wang, Renxiao

2017-02-21

In structure-based drug design, scoring functions are widely used for fast evaluation of protein-ligand interactions. They are often applied in combination with molecular docking and de novo design methods. Since the early 1990s, a whole spectrum of protein-ligand interaction scoring functions have been developed. Regardless of their technical difference, scoring functions all need data sets combining protein-ligand complex structures and binding affinity data for parametrization and validation. However, data sets of this kind used to be rather limited in terms of size and quality. On the other hand, standard metrics for evaluating scoring function used to be ambiguous. Scoring functions are often tested in molecular docking or even virtual screening trials, which do not directly reflect the genuine quality of scoring functions. Collectively, these underlying obstacles have impeded the invention of more advanced scoring functions. In this Account, we describe our long-lasting efforts to overcome these obstacles, which involve two related projects. On the first project, we have created the PDBbind database. It is the first database that systematically annotates the protein-ligand complexes in the Protein Data Bank (PDB) with experimental binding data. This database has been updated annually since its first public release in 2004. The latest release (version 2016) provides binding data for 16 179 biomolecular complexes in PDB. Data sets provided by PDBbind have been applied to many computational and statistical studies on protein-ligand interaction and various subjects. In particular, it has become a major data resource for scoring function development. On the second project, we have established the Comparative Assessment of Scoring Functions (CASF) benchmark for scoring function evaluation. Our key idea is to decouple the "scoring" process from the "sampling" process, so scoring functions can be tested in a relatively pure context to reflect their quality. In our latest work on this track, i.e. CASF-2013, the performance of a scoring function was quantified in four aspects, including "scoring power", "ranking power", "docking power", and "screening power". All four performance tests were conducted on a test set containing 195 high-quality protein-ligand complexes selected from PDBbind. A panel of 20 standard scoring functions were tested as demonstration. Importantly, CASF is designed to be an open-access benchmark, with which scoring functions developed by different researchers can be compared on the same grounds. Indeed, it has become a popular choice for scoring function validation in recent years. Despite the considerable progress that has been made so far, the performance of today's scoring functions still does not meet people's expectations in many aspects. There is a constant demand for more advanced scoring functions. Our efforts have helped to overcome some obstacles underlying scoring function development so that the researchers in this field can move forward faster. We will continue to improve the PDBbind database and the CASF benchmark in the future to keep them as useful community resources.

Standards for Cell Line Authentication and Beyond

PubMed Central

Cole, Kenneth D.; Plant, Anne L.

2016-01-01

Different genomic technologies have been applied to cell line authentication, but only one method (short tandem repeat [STR] profiling) has been the subject of a comprehensive and definitive standard (ASN-0002). Here we discuss the power of this document and why standards such as this are so critical for establishing the consensus technical criteria and practices that can enable progress in the fields of research that use cell lines. We also examine other methods that could be used for authentication and discuss how a combination of methods could be used in a holistic fashion to assess various critical aspects of the quality of cell lines. PMID:27300367

Rapid algorithm prototyping and implementation for power quality measurement

NASA Astrophysics Data System (ADS)

Kołek, Krzysztof; Piątek, Krzysztof

2015-12-01

This article presents a Model-Based Design (MBD) approach to rapidly implement power quality (PQ) metering algorithms. Power supply quality is a very important aspect of modern power systems and will become even more important in future smart grids. In this case, maintaining the PQ parameters at the desired level will require efficient implementation methods of the metering algorithms. Currently, the development of new, advanced PQ metering algorithms requires new hardware with adequate computational capability and time intensive, cost-ineffective manual implementations. An alternative, considered here, is an MBD approach. The MBD approach focuses on the modelling and validation of the model by simulation, which is well-supported by a Computer-Aided Engineering (CAE) packages. This paper presents two algorithms utilized in modern PQ meters: a phase-locked loop based on an Enhanced Phase Locked Loop (EPLL), and the flicker measurement according to the IEC 61000-4-15 standard. The algorithms were chosen because of their complexity and non-trivial development. They were first modelled in the MATLAB/Simulink package, then tested and validated in a simulation environment. The models, in the form of Simulink diagrams, were next used to automatically generate C code. The code was compiled and executed in real-time on the Zynq Xilinx platform that combines a reconfigurable Field Programmable Gate Array (FPGA) with a dual-core processor. The MBD development of PQ algorithms, automatic code generation, and compilation form a rapid algorithm prototyping and implementation path for PQ measurements. The main advantage of this approach is the ability to focus on the design, validation, and testing stages while skipping over implementation issues. The code generation process renders production-ready code that can be easily used on the target hardware. This is especially important when standards for PQ measurement are in constant development, and the PQ issues in emerging smart grids will require tools for rapid development and implementation of such algorithms.

Achievable flatness in a large microwave power antenna study

NASA Technical Reports Server (NTRS)

1978-01-01

Achievable flatness for the microwave power transmission system antenna array was determined. Two configurations were analyzed in detail and evaluated as to their net potential misalignment. Manufacturing, joint slack, assembly, alignment and environmental aspects were considered. Approaches to each aspect were analyzed to minimize their contributions to distortions.

The Salience of Adolescent Romantic Experiences for Romantic Relationship Qualities in Young Adulthood

ERIC Educational Resources Information Center

Madsen, Stephanie D.; Collins, W. Andrew

2011-01-01

Conceptual links between aspects of adolescents' dating experiences (i.e., involvement and quality; ages 15-17.5) and qualities of their romantic relationships in young adulthood (ages 20-21) were examined in a prospective longitudinal design. Even after accounting for earlier relationship experiences with parents and peers, aspects of adolescent…

The Massification of Higher Education in the UK: Aspects of Service Quality

ERIC Educational Resources Information Center

Giannakis, Mihalis; Bullivant, Nicola

2016-01-01

This article explores several aspects of service quality for the provision of higher education. Alongside the trend of the massification of higher education over the past two decades, higher education institutions are required to review quality across a range of outputs, besides teaching and learning. The study was undertaken within the…

An evaluation method of power quality about electrified railways connected to power grid based on PSCAD/EMTDC

NASA Astrophysics Data System (ADS)

Liang, Weibin; Ouyang, Sen; Huang, Xiang; Su, Weijian

2017-05-01

The existing modeling process of power quality about electrified railways connected to power grid is complicated and the simulation scene is incomplete, so this paper puts forward a novel evaluation method of power quality based on PSCAD/ETMDC. Firstly, a model of power quality about electrified railways connected to power grid is established, which is based on testing report or measured data. The equivalent model of electrified locomotive contains power characteristic and harmonic characteristic, which are substituted by load and harmonic source. Secondly, in order to make evaluation more complete, an analysis scheme has been put forward. The scheme uses a combination of three-dimensions of electrified locomotive, which contains types, working conditions and quantity. At last, Shenmao Railway is taken as example to evaluate the power quality at different scenes, and the result shows electrified railways connected to power grid have significant effect on power quality.

Development of an expert system for power quality advisement using CLIPS 6.0

NASA Technical Reports Server (NTRS)

Chandrasekaran, A.; Sarma, P. R. R.; Sundaram, Ashok

1994-01-01

Proliferation of power electronic devices has brought in its wake both deterioration in and demand for quality power supply from the utilities. The power quality problems become apparent when the user's equipment or systems maloperate or fail. Since power quality concerns arise from a wide variety of sources and the problem fixes are better achieved from the expertise of field engineers, development of an expert system for power quality advisement seems to be a very attractive and cost-effective solution for utility applications. An expert system thus developed gives an understanding of the adverse effects of power quality related problems on the system and could help in finding remedial solutions. The paper reports the design of a power quality advisement expert system being developed using CLIPS 6.0. A brief outline of the power quality concerns is first presented. A description of the knowledge base is next given and details of actual implementation include screen output from the program.

Positive aspects of caregiving and its correlates in caregivers of schizophrenia: a study from north India.

PubMed

Kate, N; Grover, S; Kulhara, P; Nehra, R

2013-06-01

OBJECTIVE. To study the positive aspects of caregiving and its correlates in primary caregivers of patients with schizophrenia. METHODS. A total of 100 patients with schizophrenia and their primary caregivers were evaluated. Regarding the caregivers, their positive aspects of caregiving were assessed on the Scale for Positive Aspects of Caregiving Experience (SPACE). To examine the correlates of positive aspects of caregiving, they were also assessed on the Family Burden Interview (FBI) Schedule, the Involvement Evaluation Questionnaire (IEQ), coping checklist, the Social Support Questionnaire, the World Health Organization Quality of Life-BREF (Hindi version), the WHO Quality of Life-Spirituality, Religiousness and Personal Beliefs Scale, as well as the General Health Questionnaire-12. The patients were assessed on the Positive and Negative Syndrome Scale (PANSS) and the Global Assessment of Functioning Scale. RESULTS. On the SPACE, the highest mean score was seen in the domain of motivation for the caregiving role (2.7), followed by that of caregiver satisfaction (2.4) and caregiver gains (2.3). The mean score was least for the domain of self-esteem and social aspect of caring (1.9). The SPACE domain of caregiver satisfaction correlated negatively with many aspects of burden as assessed by FBI Schedule and coping as assessed by the coping checklist; whereas the self-esteem and social aspect of caring domain correlated positively with worrying-urging II domain and the total IEQ score. No significant correlations between the SPACE and socio-demographics as well as most of the clinical variables were noted. Motivation for the caregiving had a positive correlation with the PANSS negative symptom scale. Multiple correlations were found between the SPACE and quality of life, suggesting that higher positive caregiving experience was associated with better quality of life in caregivers. CONCLUSION. Caregivers of patients with schizophrenia do enjoy positive aspects of caregiving while taking care of their ill relatives. In these caregivers, the positive aspects of caregiving were associated with better quality of life.

Seed germination test for toxicity evaluation of compost: Its roles, problems and prospects.

PubMed

Luo, Yuan; Liang, Jie; Zeng, Guangming; Chen, Ming; Mo, Dan; Li, Guoxue; Zhang, Difang

2018-01-01

Compost is commonly used for the growth of plants and the remediation of environmental pollution. It is important to evaluate the quality of compost and seed germination test is a powerful tool to examine the toxicity of compost, which is the most important aspect of the quality. Now the test is widely adopted, but the main problem is that the test results vary with different methods and seed species, which limits the development and application of it. The standardization of methods and the modelization of seeds can contribute to solving the problem. Additionally, according to the probabilistic theory of seed germination, the error caused by the analysis and judgment methods of the test results can be reduced. Here, we reviewed the roles, problems and prospects of the seed germination test in the studies of compost. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quality control and conduct of genome-wide association meta-analyses.

PubMed

Winkler, Thomas W; Day, Felix R; Croteau-Chonka, Damien C; Wood, Andrew R; Locke, Adam E; Mägi, Reedik; Ferreira, Teresa; Fall, Tove; Graff, Mariaelisa; Justice, Anne E; Luan, Jian'an; Gustafsson, Stefan; Randall, Joshua C; Vedantam, Sailaja; Workalemahu, Tsegaselassie; Kilpeläinen, Tuomas O; Scherag, André; Esko, Tonu; Kutalik, Zoltán; Heid, Iris M; Loos, Ruth J F

2014-05-01

Rigorous organization and quality control (QC) are necessary to facilitate successful genome-wide association meta-analyses (GWAMAs) of statistics aggregated across multiple genome-wide association studies. This protocol provides guidelines for (i) organizational aspects of GWAMAs, and for (ii) QC at the study file level, the meta-level across studies and the meta-analysis output level. Real-world examples highlight issues experienced and solutions developed by the GIANT Consortium that has conducted meta-analyses including data from 125 studies comprising more than 330,000 individuals. We provide a general protocol for conducting GWAMAs and carrying out QC to minimize errors and to guarantee maximum use of the data. We also include details for the use of a powerful and flexible software package called EasyQC. Precise timings will be greatly influenced by consortium size. For consortia of comparable size to the GIANT Consortium, this protocol takes a minimum of about 10 months to complete.

Fiber laser welding of nickel based superalloy Inconel 625

NASA Astrophysics Data System (ADS)

Janicki, Damian M.

2013-01-01

The paper describes the application of single mode high power fiber laser (HPFL) for the welding of nickel based superalloy Inconel 625. Butt joints of Inconel 625 sheets 0,8 mm thick were laser welded without an additional material. The influence of laser welding parameters on weld quality and mechanical properties of test joints was studied. The quality and mechanical properties of the joints were determined by means of tensile and bending tests, and micro hardness tests, and also metallographic examinations. The results showed that a proper selection of laser welding parameters provides non-porous, fully-penetrated welds with the aspect ratio up to 2.0. The minimum heat input required to achieve full penetration butt welded joints with no defect was found to be 6 J/mm. The yield strength and ultimate tensile strength of the joints are essentially equivalent to that for the base material.

Quality control and conduct of genome-wide association meta-analyses

PubMed Central

Winkler, Thomas W; Day, Felix R; Croteau-Chonka, Damien C; Wood, Andrew R; Locke, Adam E; Mägi, Reedik; Ferreira, Teresa; Fall, Tove; Graff, Mariaelisa; Justice, Anne E; Luan, Jian'an; Gustafsson, Stefan; Randall, Joshua C; Vedantam, Sailaja; Workalemahu, Tsegaselassie; Kilpeläinen, Tuomas O; Scherag, André; Esko, Tonu; Kutalik, Zoltán; Heid, Iris M; Loos, Ruth JF

2014-01-01

Rigorous organization and quality control (QC) are necessary to facilitate successful genome-wide association meta-analyses (GWAMAs) of statistics aggregated across multiple genome-wide association studies. This protocol provides guidelines for [1] organizational aspects of GWAMAs, and for [2] QC at the study file level, the meta-level across studies, and the meta-analysis output level. Real–world examples highlight issues experienced and solutions developed by the GIANT Consortium that has conducted meta-analyses including data from 125 studies comprising more than 330,000 individuals. We provide a general protocol for conducting GWAMAs and carrying out QC to minimize errors and to guarantee maximum use of the data. We also include details for use of a powerful and flexible software package called EasyQC. For consortia of comparable size to the GIANT consortium, the present protocol takes a minimum of about 10 months to complete. PMID:24762786

Power Quality Improvement by Unified Power Quality Conditioner Based on CSC Topology Using Synchronous Reference Frame Theory

PubMed Central

Dharmalingam, Rajasekaran; Dash, Subhransu Sekhar; Senthilnathan, Karthikrajan; Mayilvaganan, Arun Bhaskar; Chinnamuthu, Subramani

2014-01-01

This paper deals with the performance of unified power quality conditioner (UPQC) based on current source converter (CSC) topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems. PMID:25013854

Power quality improvement by unified power quality conditioner based on CSC topology using synchronous reference frame theory.

PubMed

Dharmalingam, Rajasekaran; Dash, Subhransu Sekhar; Senthilnathan, Karthikrajan; Mayilvaganan, Arun Bhaskar; Chinnamuthu, Subramani

2014-01-01

This paper deals with the performance of unified power quality conditioner (UPQC) based on current source converter (CSC) topology. UPQC is used to mitigate the power quality problems like harmonics and sag. The shunt and series active filter performs the simultaneous elimination of current and voltage problems. The power fed is linked through common DC link and maintains constant real power exchange. The DC link is connected through the reactor. The real power supply is given by the photovoltaic system for the compensation of power quality problems. The reference current and voltage generation for shunt and series converter is based on phase locked loop and synchronous reference frame theory. The proposed UPQC-CSC design has superior performance for mitigating the power quality problems.

Neural and Molecular Mechanisms Involved in Controlling the Quality of Feeding Behavior: Diet Selection and Feeding Patterns

PubMed Central

2017-01-01

We are what we eat. There are three aspects of feeding: what, when, and how much. These aspects represent the quantity (how much) and quality (what and when) of feeding. The quantitative aspect of feeding has been studied extensively, because weight is primarily determined by the balance between caloric intake and expenditure. In contrast, less is known about the mechanisms that regulate the qualitative aspects of feeding, although they also significantly impact the control of weight and health. However, two aspects of feeding quality relevant to weight loss and weight regain are discussed in this review: macronutrient-based diet selection (what) and feeding pattern (when). This review covers the importance of these two factors in controlling weight and health, and the central mechanisms that regulate them. The relatively limited and fragmented knowledge on these topics indicates that we lack an integrated understanding of the qualitative aspects of feeding behavior. To promote better understanding of weight control, research efforts must focus more on the mechanisms that control the quality and quantity of feeding behavior. This understanding will contribute to improving dietary interventions for achieving weight control and for preventing weight regain following weight loss. PMID:29053636

Power reduction and the radial limit of stall delay in revolving wings of different aspect ratio

PubMed Central

Kruyt, Jan W.; van Heijst, GertJan F.; Altshuler, Douglas L.; Lentink, David

2015-01-01

Airplanes and helicopters use high aspect ratio wings to reduce the power required to fly, but must operate at low angle of attack to prevent flow separation and stall. Animals capable of slow sustained flight, such as hummingbirds, have low aspect ratio wings and flap their wings at high angle of attack without stalling. Instead, they generate an attached vortex along the leading edge of the wing that elevates lift. Previous studies have demonstrated that this vortex and high lift can be reproduced by revolving the animal wing at the same angle of attack. How do flapping and revolving animal wings delay stall and reduce power? It has been hypothesized that stall delay derives from having a short radial distance between the shoulder joint and wing tip, measured in chord lengths. This non-dimensional measure of wing length represents the relative magnitude of inertial forces versus rotational accelerations operating in the boundary layer of revolving and flapping wings. Here we show for a suite of aspect ratios, which represent both animal and aircraft wings, that the attachment of the leading edge vortex on a revolving wing is determined by wing aspect ratio, defined with respect to the centre of revolution. At high angle of attack, the vortex remains attached when the local radius is shorter than four chord lengths and separates outboard on higher aspect ratio wings. This radial stall limit explains why revolving high aspect ratio wings (of helicopters) require less power compared with low aspect ratio wings (of hummingbirds) at low angle of attack and vice versa at high angle of attack. PMID:25788539

Rectenna session: Micro aspects. [energy conversion

NASA Technical Reports Server (NTRS)

Gutmann, R. J.

1980-01-01

Two micro aspects of the rectenna design are addressed: evaluation of the degradation in net rectenna RF to DC conversion efficiency due to power density variations across the rectenna (power combining analysis) and design of Yagi-Uda receiving elements to reduce rectenna cost by decreasing the number of conversion circuits (directional receiving elements). The first of these micro aspects involves resolving a fundamental question of efficiency potential with a rectenna, while the second involves a design modification with a large potential cost saving.

Students Perceived Value towards Quality of Distance Education in Tamil Nadu

ERIC Educational Resources Information Center

Jeyaraj, P.; Sugumar, D.; Thandavamoorthy, K.; Xavier, S. Joseph

2014-01-01

The quality of education of any distance learning programme is maintained by various ways, such as: quality of study material, internal and external evaluation, and student support methods and so on. The above aspects should be available in aspects to the Post graduate degree students. In this research Ex Post Facto research with field survey is…

Standby-battery autonomy versus power quality

NASA Astrophysics Data System (ADS)

Bitterlin, Ian F.

Batteries are used in a wide variety of applications as an energy store to bridge gaps in the primary source of supplied power for a given period of time. In some cases this bridging time, the battery's "autonomy", is fixed by local legislation but it is also often set by historically common practices. However, even if common practice dictates a long autonomy time, we are entering a new era of "cost and benefit realism" underpinned by environmentally friendly policies and we should challenge these historical practices at every opportunity if it can lead to resource and cost savings. In some cases the application engineer has no choice in the design autonomy; either follow a piece of local legislation (e.g. 4 h autonomy for a "life safety" application), or actually work out what is needed! An example of the latter would be for a remote site, off-grid, using integrated wind/solar power (without emergency generator back-up) where you may have to design-in several days' battery autonomy. This short paper proposes that a battery's autonomy should be related to the time expected for the system to be without the primary power source, balanced by the capital costs and commercial risk of power failure. To discuss this we shall consider the factors in selecting the autonomy time and other related aspects for high voltage battery systems used in facility-wide uninterruptible power supply (UPS) systems.

Social and Cultural Meanings of Self-Efficacy

PubMed Central

Burke, Nancy J.; Bird, Joyce A.; Clark, Melissa A.; Rakowski, William; Guerra, Claudia; Barker, Judith C.; Pasick, Rena J.

2010-01-01

This article describes the influences of social context on women’s health behavior through illustration of the powerful influences of social capital (the benefits and challenges that accrue from participation in social networks and groups) on experiences and perceptions of self-efficacy. The authors conducted inductive interviews with Latino and Filipino academics and social service providers and with U.S.-born and immigrant Latinas and Filipinas to explore direct and indirect influences of social context on health behaviors such as mammography screening. Iterative thematic analysis identified themes (meanings of efficacy, spheres of efficacy, constraints on efficacy, sources of social capital, and differential access to and quality of social capital) that link the domain of social capital with the behavioral construct perceived self-efficacy. The authors conclude that social capital addresses aspects of social context absent in the current self-efficacy construct and that these aspects have important implications for scholars’ and practitioners’ understandings of health behavior and intervention development. PMID:19805794

Mucosal adjuvants and long-term memory development with special focus on CTA1-DD and other ADP-ribosylating toxins.

PubMed

Lycke, N; Bemark, M

2010-11-01

The ultimate goal for vaccination is to stimulate protective immunological memory. Protection against infectious diseases not only relies on the magnitude of the humoral immune response, but more importantly on the quality and longevity of it. Adjuvants are critical components of most non-living vaccines. Although little attention has been given to qualitative aspects of the choice of vaccine adjuvant, emerging data demonstrate that this function may be central to vaccine efficacy. In this review we describe efforts to understand more about how adjuvants influence qualitative aspects of memory development. We describe recent advances in understanding how vaccines induce long-lived plasma and memory B cells, and focus our presentation on the germinal center reaction. As mucosal vaccination requires powerful adjuvants, we have devoted much attention to the adenosine diphosphate (ADP)-ribosylating cholera toxin and the CTA1-DD adjuvants as examples of how mucosal adjuvants can influence induction of long-term memory.

Tailoring femtosecond 1.5-μm Bessel beams for manufacturing high-aspect-ratio through-silicon vias

NASA Astrophysics Data System (ADS)

He, Fei; Yu, Junjie; Tan, Yuanxin; Chu, Wei; Zhou, Changhe; Cheng, Ya; Sugioka, Koji

2017-01-01

Three-dimensional integrated circuits (3D ICs) are an attractive replacement for conventional 2D ICs as high-performance, low-power-consumption, and small-footprint microelectronic devices. However, one of the major remaining challenges is the manufacture of high-aspect-ratio through-silicon vias (TSVs), which is a crucial technology for the assembly of 3D Si ICs. Here, we present the fabrication of high-quality TSVs using a femtosecond (fs) 1.5-μm Bessel beam. To eliminate the severe ablation caused by the sidelobes of a conventional Bessel beam, a fs Bessel beam is tailored using a specially designed binary phase plate. We demonstrate that the tailored fs Bessel beam can be used to fabricate a 2D array of approximately ∅10-μm TSVs on a 100-μm-thick Si substrate without any sidelobe damage, suggesting potential application in the 3D assembly of 3D Si ICs.

Tailoring femtosecond 1.5-μm Bessel beams for manufacturing high-aspect-ratio through-silicon vias.

PubMed

He, Fei; Yu, Junjie; Tan, Yuanxin; Chu, Wei; Zhou, Changhe; Cheng, Ya; Sugioka, Koji

2017-01-18

Three-dimensional integrated circuits (3D ICs) are an attractive replacement for conventional 2D ICs as high-performance, low-power-consumption, and small-footprint microelectronic devices. However, one of the major remaining challenges is the manufacture of high-aspect-ratio through-silicon vias (TSVs), which is a crucial technology for the assembly of 3D Si ICs. Here, we present the fabrication of high-quality TSVs using a femtosecond (fs) 1.5-μm Bessel beam. To eliminate the severe ablation caused by the sidelobes of a conventional Bessel beam, a fs Bessel beam is tailored using a specially designed binary phase plate. We demonstrate that the tailored fs Bessel beam can be used to fabricate a 2D array of approximately ∅10-μm TSVs on a 100-μm-thick Si substrate without any sidelobe damage, suggesting potential application in the 3D assembly of 3D Si ICs.

Structural relations of convenience food satisfaction and quality of life according to dietary style: Focusing on singles in metropolitan area of Korea.

PubMed

Kim, Boram; Joo, Nami

2014-10-01

Although the issues of singles' dietary style and quality of life are becoming important due to the increasing number of singles with economic power, little research has been conducted to date on singles' use of convenience food and quality of life in relation to their dietary style. Thus, the present study intends to provide basic data to improve the quality of life by determining the current status of the use of convenience food and explicating its relationship with quality of life through analyzing the dietary lifestyles of the singles. The targets of this study were singles, identified as adults between the ages of 25 and 54, living alone, either legally or in actuality having no partner. A statistical analysis of 208 surveys from Seoul, respectively, was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The convenience-oriented was shown to have a significant positive effect on convenience food satisfaction. HMR satisfaction was found to have a significant effect on positive psychological satisfaction and the convenience-oriented was found to have a significant negative effect on all aspects of quality of life satisfaction. There must be persistent development of food industries considering the distinctive characteristics of the lives of singles in order to satisfy their needs and improve the quality of their lives.

Power System Test and Verification at Satellite Level

NASA Astrophysics Data System (ADS)

Simonelli, Giulio; Mourra, Olivier; Tonicello, Ferdinando

2008-09-01

Most of the articles on Power Systems deal with the architecture and technical solutions related to the functionalities of the power system and their performances. Very few articles, if none, address integration and verification aspects of the Power System at satellite level and the related issues with the Power EGSE (Electrical Ground Support Equipment), which, also, have to support the AIT/AIV (Assembly Integration Test and Verification) program of the satellite and, eventually, the launch campaign. In the last years a more complex development and testing concept based on MDVE (Model Based Development and Verification Environment) has been introduced. In the MDVE approach the simulation software is used to simulate the Satellite environment and, in the early stages, the satellites units. This approach changed significantly the Power EGSE requirements. Power EGSEs or, better, Power SCOEs (Special Check Out Equipment) are now requested to provide the instantaneous power generated by the solar array throughout the orbit. To achieve that, the Power SCOE interfaces to the RTS (Real Time Simulator) of the MDVE. The RTS provides the instantaneous settings, which belong to that point along the orbit, to the Power SCOE so that the Power SCOE generates the instantaneous {I,V} curve of the SA (Solar Array). That means a real time test for the power system, which is even more valuable for EO (Earth Observation) satellites where the Solar Array aspect angle to the sun is rarely fixed, and the power load profile can be particularly complex (for example, in radar applications). In this article the major issues related to integration and testing of Power Systems will be discussed taking into account different power system topologies (i.e. regulated bus, unregulated bus, battery bus, based on MPPT or S3R…). Also aspects about Power System AIT I/Fs (interfaces) and Umbilical I/Fs with the launcher and the Power SCOE I/Fs will be addressed. Last but not least, protection strategy of the Power System during AIT/AIV program will also be discussed. The objective of this discussion is also to provide the Power System Engineer with a checklist of key aspects linked to the satellite AIT/AIV program, that have to be considered in the early phases of a new power system development.

Quality and learning aspects of the first 9000 spirometries of the LifeGene study.

PubMed

Qvarfordt, Mikaela; Anderson, Martin; Svartengren, Magnus

2018-02-19

Spirometry requires the patient to cooperate and do the manoeuvre 'right' for reliable results. Algorithms to assess test quality as well as educational recommendations for personnel are defined in guidelines. We compared the quality of forced spirometry tests performed by spirometry technicians with little or no previous experience of spirometry using spirometry systems with different modes of feedback. In both cases, the spirometry technician received general feedback on the screen based on ATS/ERS guidelines, such as 'exhale faster' and 'exhale longer'. The major difference was whether quality grading system of the complete session was available simultaneously on screen, or in the printed report afterwards. Two parts of the same population-based study (LifeGene), the pilot (LG1) and the first part (LG2) of the subsequent study, were compared retrospectively. In LG1 (on-screen grading) approved examination quality was achieved for 88% of the 10 first subjects for each spirometry technician compared to 70% in LG2 (printed grading afterwards). The corresponding values after 40 subjects was 94 % in LG1, compared to 73% in LG2, and after the first ten subjects there was no apparent quality improvement in either LG1 or LG2. The quality for LG1 is among the highest reported in the literature even though the spirometry technician were relatively inexperienced. We conclude that on-screen grading in addition to general technical quality feedback is powerful in enhancing the spirometry test session quality.

Models for the modern power grid

NASA Astrophysics Data System (ADS)

Nardelli, Pedro H. J.; Rubido, Nicolas; Wang, Chengwei; Baptista, Murilo S.; Pomalaza-Raez, Carlos; Cardieri, Paulo; Latva-aho, Matti

2014-10-01

This article reviews different kinds of models for the electric power grid that can be used to understand the modern power system, the smart grid. From the physical network to abstract energy markets, we identify in the literature different aspects that co-determine the spatio-temporal multilayer dynamics of power system. We start our review by showing how the generation, transmission and distribution characteristics of the traditional power grids are already subject to complex behaviour appearing as a result of the the interplay between dynamics of the nodes and topology, namely synchronisation and cascade effects. When dealing with smart grids, the system complexity increases even more: on top of the physical network of power lines and controllable sources of electricity, the modernisation brings information networks, renewable intermittent generation, market liberalisation, prosumers, among other aspects. In this case, we forecast a dynamical co-evolution of the smart grid and other kind of networked systems that cannot be understood isolated. This review compiles recent results that model electric power grids as complex systems, going beyond pure technological aspects. From this perspective, we then indicate possible ways to incorporate the diverse co-evolving systems into the smart grid model using, for example, network theory and multi-agent simulation.

Imaging characteristics of photogrammetric camera systems

USGS Publications Warehouse

Welch, R.; Halliday, J.

1973-01-01

In view of the current interest in high-altitude and space photographic systems for photogrammetric mapping, the United States Geological Survey (U.S.G.S.) undertook a comprehensive research project designed to explore the practical aspects of applying the latest image quality evaluation techniques to the analysis of such systems. The project had two direct objectives: (1) to evaluate the imaging characteristics of current U.S.G.S. photogrammetric camera systems; and (2) to develop methodologies for predicting the imaging capabilities of photogrammetric camera systems, comparing conventional systems with new or different types of systems, and analyzing the image quality of photographs. Image quality was judged in terms of a number of evaluation factors including response functions, resolving power, and the detectability and measurability of small detail. The limiting capabilities of the U.S.G.S. 6-inch and 12-inch focal length camera systems were established by analyzing laboratory and aerial photographs in terms of these evaluation factors. In the process, the contributing effects of relevant parameters such as lens aberrations, lens aperture, shutter function, image motion, film type, and target contrast procedures for analyzing image quality and predicting and comparing performance capabilities. ?? 1973.

Space-Based Solar Power Conversion and Delivery Systems Study. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1977-01-01

The research concerning space-based solar power conversion and delivery systems is summarized. The potential concepts for a photovoltaic satellite solar power system was studied with emphasis on ground output power levels of 5,000 MW and 10,000 MW. A power relay satellite, and certain aspects of the economics of these systems were also studied. A second study phase examined in greater depth the technical and economic aspects of satellite solar power systems. Throughout this study, the focus was on the economics of satellite solar power. The results indicate technical feasibility of the concept, and provide a preliminary economic justification for the first phase of a substantial development program. A development program containing test satellites is recommended. Also, development of alternative solar cell materials (other than silicon) is recommended.

Pilot evaluation of electricity-reliability and power-quality monitoring in California's Silicon Valley with the I-Grid(R) system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eto, Joseph; Divan, Deepak; Brumsickle, William

2004-02-01

Power-quality events are of increasing concern for the economy because today's equipment, particularly computers and automated manufacturing devices, is susceptible to these imperceptible voltage changes. A small variation in voltage can cause this equipment to shut down for long periods, resulting in significant business losses. Tiny variations in power quality are difficult to detect except with expensive monitoring equipment used by trained technicians, so many electricity customers are unaware of the role of power-quality events in equipment malfunctioning. This report describes the findings from a pilot study coordinated through the Silicon Valley Manufacturers Group in California to explore the capabilitiesmore » of I-Grid(R), a new power-quality monitoring system. This system is designed to improve the accessibility of power-quality in formation and to increase understanding of the growing importance of electricity reliability and power quality to the economy. The study used data collected by I-Grid sensors at seven Silicon Valley firms to investigate the impacts of power quality on individual study participants as well as to explore the capabilities of the I-Grid system to detect events on the larger electricity grid by means of correlation of data from the sensors at the different sites. In addition, study participants were interviewed about the value they place on power quality, and their efforts to address electricity-reliability and power-quality problems. Issues were identified that should be taken into consideration in developing a larger, potentially nationwide, network of power-quality sensors.« less

Design of Interline Unified Power Quality Conditioner for Power Quality Disturbances using Simulink

NASA Astrophysics Data System (ADS)

Kumaraswamy, G.; Reddy, Y. Rajasekhar; Harikrishna, Ch.

2012-10-01

Proliferation of electronic equipment in commercial and industrial processes has resulted in increasingly sensitive electrical loads to be fed from power distribution system which introduce contamination to voltage and current waveforms at the point of common coupling of industrial loads. The unified power quality conditioner (UPQC) is connected between two different feeders (lines), hence this method of connection of the UPQC is called as Interline UPQC (IUPQC).This paper proposes a new connection for a UPQC to improve the power quality of two feeders in a distribution system. Interline Unified Power Quality Conditioner (IUPQC), specifically aims at the integration of series VSC and Shunt VSC to provide high quality power supply by means of voltage sag/swell compensation, harmonic elimination and power factor correction in a power distribution network, so that improved power quality can be made available at the point of common coupling. The structure, control and capability of the IUPQC are discussed in this paper. The efficiency of the proposed configuration has been verified through simulation using MATLAB/ SIMULINK.

Student and Faculty Perceptions of Service Quality: The Moderating Role of the Institutional Aspects

ERIC Educational Resources Information Center

Duževic, Ines; Ceh Casni, Anita

2015-01-01

The purpose of this study was to explore key attributes of service quality in the Croatian higher education system. In particular, the study aims to compare student and faculty perceptions of service quality and to identify institutional aspects that may affect the perceptions of these two customers. Principal component analysis is used to define…

Automated recognition system for power quality disturbances

NASA Astrophysics Data System (ADS)

Abdelgalil, Tarek

The application of deregulation policies in electric power systems has resulted in the necessity to quantify the quality of electric power. This fact highlights the need for a new monitoring strategy which is capable of tracking, detecting, classifying power quality disturbances, and then identifying the source of the disturbance. The objective of this work is to design an efficient and reliable power quality monitoring strategy that uses the advances in signal processing and pattern recognition to overcome the deficiencies that exist in power quality monitoring devices. The purposed monitoring strategy has two stages. The first stage is to detect, track, and classify any power quality violation by the use of on-line measurements. In the second stage, the source of the classified power quality disturbance must be identified. In the first stage, an adaptive linear combiner is used to detect power quality disturbances. Then, the Teager Energy Operator and Hilbert Transform are utilized for power quality event tracking. After the Fourier, Wavelet, and Walsh Transforms are employed for the feature extraction, two approaches are then exploited to classify the different power quality disturbances. The first approach depends on comparing the disturbance to be classified with a stored set of signatures for different power quality disturbances. The comparison is developed by using Hidden Markov Models and Dynamic Time Warping. The second approach depends on employing an inductive inference to generate the classification rules directly from the data. In the second stage of the new monitoring strategy, only the problem of identifying the location of the switched capacitor which initiates the transients is investigated. The Total Least Square-Estimation of Signal Parameters via Rotational Invariance Technique is adopted to estimate the amplitudes and frequencies of the various modes contained in the voltage signal measured at the facility entrance. After extracting the amplitudes and frequencies, an Artificial Neural Network is employed to identify the switched capacitor by using amplitudes and frequencies extracted from the transient signal. The new algorithms for detecting, tracking, and classifying power quality disturbances demonstrate the potential for further development of a fully automated recognition system for the assessment of power quality. This is possible because the implementation of the proposed algorithms for the power quality monitoring device becomes a straight forward process by modifying the device software.

A Logistic Life Cycle Cost-Benefit Analysis of Power Quality Management in the Avionics Repair Facility

DTIC Science & Technology

1998-06-01

quality management can have on the intermediate level of maintenance. Power quality management is a preventative process that focuses on identifying and correcting problems that cause bad power. Using cost-benefit analysis we compare the effects of implementing a power quality management program at AIMD Lemoore and AIMD Fallon. The implementation of power quality management can result in wide scale logistical support changes in regards to the life cycle costs of maintaining the DoD’s current inventory

Quality Attributes for Mission Flight Software: A Reference for Architects

NASA Technical Reports Server (NTRS)

Wilmot, Jonathan; Fesq, Lorraine; Dvorak, Dan

2016-01-01

In the international standards for architecture descriptions in systems and software engineering (ISO/IEC/IEEE 42010), "concern" is a primary concept that often manifests itself in relation to the quality attributes or "ilities" that a system is expected to exhibit - qualities such as reliability, security and modifiability. One of the main uses of an architecture description is to serve as a basis for analyzing how well the architecture achieves its quality attributes, and that requires architects to be as precise as possible about what they mean in claiming, for example, that an architecture supports "modifiability." This paper describes a table, generated by NASA's Software Architecture Review Board, which lists fourteen key quality attributes, identifies different important aspects of each quality attribute and considers each aspect in terms of requirements, rationale, evidence, and tactics to achieve the aspect. This quality attribute table is intended to serve as a guide to software architects, software developers, and software architecture reviewers in the domain of mission-critical real-time embedded systems, such as space mission flight software.

Gender Roles and Mental Health in Women With and at Risk for HIV

PubMed Central

Brody, Leslie R.; Stokes, Lynissa R.; Dale, Sannisha K.; Kelso, Gwendolyn A.; Cruise, Ruth C.; Weber, Kathleen M.; Burke-Miller, Jane K.; Cohen, Mardge H.

2014-01-01

Predominantly low-income and African American women from the same community, HIV-infected (n = 100; HIV+) and uninfected (n = 42; HIV−), were assessed on reported gender roles in sexual and other close relationships—including levels of self-silencing, unmitigated communion, and sexual relationship power—at a single recent study visit during 2008–2012. Recent gender roles were investigated in relation to depressive symptoms and health-related quality of life assessed both at a single visit during 2008–2012 and averaged over semiannual visits (for depressive symptoms) and annual visits (for quality of life) occurring between 1994 and 2012. Compared to HIV− women, HIV+ women reported significantly higher levels of several aspects of self-silencing, unmitigated communion, and multi-year averaged depressive symptoms as well as lower levels of sexual relationship power and recent and multi-year averaged quality of life. For both HIV+ and HIV− women, higher self-silencing and unmitigated communion significantly related to recent or multi-year averaged higher depressive symptoms and lower quality of life. Intervention strategies designed to increase self-care and self-advocacy in the context of relationships could potentially minimize depressive symptoms and enhance quality of life in women with and at risk for HIV. PMID:25492991

Funding source and the quality of reports of chronic wounds trials: 2004 to 2011

PubMed Central

2014-01-01

Background Critical commentaries suggest that wound care randomised controlled trials (RCTs) are often poorly reported with many methodological flaws. Furthermore, interventions in chronic wounds, rather than being drugs, are often medical devices for which there are no requirements for RCTs to bring products to market. RCTs in wounds trials therefore potentially represent a form of marketing. This study presents a methodological overview of chronic wound trials published between 2004 and 2011 and investigates the influence of industry funding on methodological quality. Methods A systematic search for RCTs for the treatment of chronic wounds published in the English language between 2004 and 2011 (inclusive) in the Cochrane Wounds Group Specialised Register of Trials was carried out. Data were extracted on aspects of trial design, conduct and quality including sample size, duration of follow-up, specification of a primary outcome, use of surrogate outcomes, and risks of bias. In addition, the prevalence of industry funding was assessed and its influence on the above aspects of trial design, conduct and quality was assessed. Results A total of 167 RCTs met our inclusion criteria. We found chronic wound trials often have short durations of follow-up (median 12 weeks), small sample sizes (median 63), fail to define a primary outcome in 41% of cases, and those that do define a primary outcome, use surrogate measures of healing in 40% of cases. Only 40% of trials used appropriate methods of randomisation, 25% concealed allocation and 34% blinded outcome assessors. Of the included trials, 41% were wholly or partially funded by industry, 33% declared non-commercial funding and 26% did not report a funding source. Industry funding was not statistically significantly associated with any measure of methodological quality, though this analysis was probably underpowered. Conclusions This overview confirms concerns raised about the methodological quality of RCTs in wound care and illustrates that greater efforts must be made to follow international standards for conducting and reporting RCTs. There is currently minimal evidence of an influence of industry funding on methodological quality although analyses had limited power and funding source was not reported for a quarter of studies. PMID:24422753

Funding source and the quality of reports of chronic wounds trials: 2004 to 2011.

PubMed

Hodgson, Robert; Allen, Richard; Broderick, Ellen; Bland, J Martin; Dumville, Jo C; Ashby, Rebecca; Bell-Syer, Sally; Foxlee, Ruth; Hall, Jill; Lamb, Karen; Madden, Mary; O'Meara, Susan; Stubbs, Nikki; Cullum, Nicky

2014-01-14

Critical commentaries suggest that wound care randomised controlled trials (RCTs) are often poorly reported with many methodological flaws. Furthermore, interventions in chronic wounds, rather than being drugs, are often medical devices for which there are no requirements for RCTs to bring products to market. RCTs in wounds trials therefore potentially represent a form of marketing. This study presents a methodological overview of chronic wound trials published between 2004 and 2011 and investigates the influence of industry funding on methodological quality. A systematic search for RCTs for the treatment of chronic wounds published in the English language between 2004 and 2011 (inclusive) in the Cochrane Wounds Group Specialised Register of Trials was carried out.Data were extracted on aspects of trial design, conduct and quality including sample size, duration of follow-up, specification of a primary outcome, use of surrogate outcomes, and risks of bias. In addition, the prevalence of industry funding was assessed and its influence on the above aspects of trial design, conduct and quality was assessed. A total of 167 RCTs met our inclusion criteria. We found chronic wound trials often have short durations of follow-up (median 12 weeks), small sample sizes (median 63), fail to define a primary outcome in 41% of cases, and those that do define a primary outcome, use surrogate measures of healing in 40% of cases. Only 40% of trials used appropriate methods of randomisation, 25% concealed allocation and 34% blinded outcome assessors. Of the included trials, 41% were wholly or partially funded by industry, 33% declared non-commercial funding and 26% did not report a funding source. Industry funding was not statistically significantly associated with any measure of methodological quality, though this analysis was probably underpowered. This overview confirms concerns raised about the methodological quality of RCTs in wound care and illustrates that greater efforts must be made to follow international standards for conducting and reporting RCTs. There is currently minimal evidence of an influence of industry funding on methodological quality although analyses had limited power and funding source was not reported for a quarter of studies.

Monitoring, documenting and reporting the quality of antibiotic use in the Netherlands: a pilot study to establish a national antimicrobial stewardship registry.

PubMed

Berrevoets, Marvin Ah; Ten Oever, Jaap; Sprong, Tom; van Hest, Reinier M; Groothuis, Ingeborg; van Heijl, Inger; Schouten, Jeroen A; Hulscher, Marlies E; Kullberg, Bart-Jan

2017-08-15

The Dutch Working Party on Antibiotic Policy is developing a national antimicrobial stewardship registry. This registry will report both the quality of antibiotic use in hospitals in the Netherlands and the stewardship activities employed. It is currently unclear which aspects of the quality of antibiotic use are monitored by antimicrobial stewardship teams (A-teams) and can be used as indicators for the stewardship registry. In this pilot study we aimed to determine which stewardship objectives are eligible for the envisioned registry. We performed an observational pilot study among five Dutch hospitals. We assessed which of the 14 validated stewardship objectives (11 process of care recommendations and 3 structure of care recommendations) the A-teams monitored and documented in individual patients. They provided, where possible, data to compute quality indicator (QI) performance scores in line with recently developed QIs to measure appropriate antibiotic use in hospitalized adults for the period of January 2015 through December 2015 RESULTS: All hospitals had a local antibiotic guideline describing recommended antimicrobial use. All A-teams monitored the performance of bedside consultations in Staphylococcus aureus bacteremia and the prescription of restricted antimicrobials. Documentation and reporting were the best for the use of restricted antimicrobials: 80% of the A-teams could report data. Lack of time and the absence of an electronic medical record system enabling documentation during the daily work flow were the main barriers hindering documentation and reporting. Five out of 11 stewardship objectives were actively monitored by A-teams. Without extra effort, 4 A-teams could report on the quality of use of restricted antibiotics. Therefore, this aspect of antibiotic use should be the starting point of the national antimicrobial stewardship registry. Our registry is expected to become a powerful tool to evaluate progress and impact of antimicrobial stewardship programs in hospitals.

Frequency, Power Differential, and Intentionality and the Relationship to Anxiety, Depression, and Self-Esteem for Victims of Bullying

ERIC Educational Resources Information Center

Malecki, Christine Kerres; Demaray, Michelle Kilpatrick; Coyle, Samantha; Geosling, Raymond; Rueger, Sandra Yu; Becker, Lisa Davidson

2015-01-01

Background: Bullying behavior is related to higher levels of internalizing distress and can be defined as including three aspects: frequency, intentionality, and power differential. However, bullying behavior is most often measured using only one aspect: frequency. Objective: The current study investigated the relative importance of several…

The Significance of Emotions and Professional Relations for Accommodating a Web-Based Ulcer Record and Improving Home-Based Care

PubMed Central

Ekeland, Anne G.

2015-01-01

Evidence of technological performance, medical improvements and economic effectiveness is generally considered sufficient for judging advances in healthcare. In this paper, I aim to add knowledge about the ways human emotions and professional relations play roles in the processes of accommodating new technologies for quality improvements. A newly-implemented, web-based ulcer record service for patients with chronic skin ulcers constitutes the case. After one year, only a few home care nurses were using the service, interacting with a specialist team. The result was disappointing, but the few users were enthusiastic. An explorative, qualitative study was initiated to understand the users, the processes that accounted for use and how improvements were enacted. In the paper, I expose the emotional aspects of the record accommodation by analyzing the ways emotions were translated in the process and how they influenced the improvements. I contend that use came about through a heterogeneous assemblage of ethical engagement and compassionate emotions stemming from frustration, combined with technological affordances and relations between different professionals. Certain aspects of the improvements are exposed. These are discussed as: (1) reconciliations between the medical facts and rational judgments, on one side, and the emotional and subjective values for judging quality, on the other; and (2) mediation between standardized and personalized care. The healing of ulcers was combined with a sense of purpose and wellbeing to validate improvements. Emotions were strongly involved, and the power of evaluative emotions and professional relations should be further explored to add to the understanding of innovation processes and to validate quality improvements. PMID:27417745

The Significance of Emotions and Professional Relations for Accommodating a Web-Based Ulcer Record and Improving Home-Based Care.

PubMed

Ekeland, Anne G

2015-01-22

Evidence of technological performance, medical improvements and economic effectiveness is generally considered sufficient for judging advances in healthcare. In this paper, I aim to add knowledge about the ways human emotions and professional relations play roles in the processes of accommodating new technologies for quality improvements. A newly-implemented, web-based ulcer record service for patients with chronic skin ulcers constitutes the case. After one year, only a few home care nurses were using the service, interacting with a specialist team. The result was disappointing, but the few users were enthusiastic. An explorative, qualitative study was initiated to understand the users, the processes that accounted for use and how improvements were enacted. In the paper, I expose the emotional aspects of the record accommodation by analyzing the ways emotions were translated in the process and how they influenced the improvements. I contend that use came about through a heterogeneous assemblage of ethical engagement and compassionate emotions stemming from frustration, combined with technological affordances and relations between different professionals. Certain aspects of the improvements are exposed. These are discussed as: (1) reconciliations between the medical facts and rational judgments, on one side, and the emotional and subjective values for judging quality, on the other; and (2) mediation between standardized and personalized care. The healing of ulcers was combined with a sense of purpose and wellbeing to validate improvements. Emotions were strongly involved, and the power of evaluative emotions and professional relations should be further explored to add to the understanding of innovation processes and to validate quality improvements.

Ecological assessment of nano-enabled supercapacitors for automotive applications

NASA Astrophysics Data System (ADS)

Weil, M.; Dura, H.; Shimon, B.; Baumann, M.; Zimmermann, B.; Ziemann, S.; Lei, C.; Markoulidis, F.; Lekakou, T.; Decker, M.

2012-09-01

New materials on nano scale have the potential to overcome existing technical barriers and are one of the most promising key technologies to enable the decoupling of economic growth and resource consumption. Developing these innovative materials for industrial applications means facing a complex quality profile, which includes among others technical, economic, and ecological aspects. So far the two latter aspects are not sufficiently included in technology development, especially from a life cycle point of view. Supercapacitors are considered a promising option for electric energy storage in hybrid and full electric cars. In comparison with presently used lithium based electro chemical storage systems supercapacitors possess a high specific power, but a relatively low specific energy. Therefore, the goal of ongoing research is to develop a new generation of supercapacitors with high specific power and high specific energy. To reach this goal particularly nano materials are developed and tested on cell level. In the presented study the ecological implications (regarding known environmental effects) of carbon based nano materials are analysed using Life Cycle Assessment (LCA). Major attention is paid to efficiency gains of nano particle production due to scaling up of such processes from laboratory to industrial production scales. Furthermore, a developed approach will be displayed, how to assess the environmental impact of nano materials on an automotive system level over the whole life cycle.

A new approach to power quality and electricity reliability monitoring-case study illustrations of the capabilities of the I-GridTM system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Divan, Deepak; Brumsickle, William; Eto, Joseph

2003-04-01

This report describes a new approach for collecting information on power quality and reliability and making it available in the public domain. Making this information readily available in a form that is meaningful to electricity consumers is necessary for enabling more informed private and public decisions regarding electricity reliability. The system dramatically reduces the cost (and expertise) needed for customers to obtain information on the most significant power quality events, called voltage sags and interruptions. The system also offers widespread access to information on power quality collected from multiple sites and the potential for capturing information on the impacts ofmore » power quality problems, together enabling a wide variety of analysis and benchmarking to improve system reliability. Six case studies demonstrate selected functionality and capabilities of the system, including: Linking measured power quality events to process interruption and downtime; Demonstrating the ability to correlate events recorded by multiple monitors to narrow and confirm the causes of power quality events; and Benchmarking power quality and reliability on a firm and regional basis.« less

Women's perception of quality of maternity services: a longitudinal survey in Nepal.

PubMed

Karkee, Rajendra; Lee, Andy H; Pokharel, Paras K

2014-01-24

In the context of maternity service, the mother's assessment of quality is central because emotional, cultural and respectful supports are vital during labour and the delivery process. This study compared client-perceived quality of maternity services between birth centres, public and private hospitals in a central hills district of Nepal. A cohort of 701 pregnant women of 5 months or more gestational age were recruited and interviewed, followed by another interview within 45 days of delivery. Perception of quality was measured by a 20-item scale with three sub-scales: health facility, health care delivery, and interpersonal aspects. Perceived quality scores were analysed by ANOVA with post-hoc comparisons and multiple linear regression. Within the health facility sub-scale, birth centre was rated lowest on items 'adequacy of medical equipment', 'health staff suited to women's health' and 'adequacy of health staff', whereas public hospital was rated the lowest with respect to 'adequacy of room', 'adequacy of water', 'environment clean', 'privacy' and 'adequacy of information'. Mean scores of total quality and sub-scales health facility and health care delivery for women attending private hospital were higher (p < 0.001) than those using birth centre or public hospital. Mean score of the sub-scale interpersonal aspects for public hospital users was lower (p < 0.001) than those delivered at private hospital and birth centre. However, perception on interpersonal aspects by women using public hospital improved significantly after delivery (p < 0.001). Overall, perception of quality differed significantly by types of health facility used for delivery. They rated lowest the supplies and equipment in birth centres and the amenities and interpersonal aspects in the public hospital. Accordingly, attention to these aspects is needed to improve the quality.

Discussion on mass concrete construction of wind turbine generator foundation

NASA Astrophysics Data System (ADS)

Shang, Liang; Wu, Chaoxiang; Yin, Xiaoyong

2018-04-01

Wind power is one of the main power sources currently. China has rich wind power resources, wind power plants are developed faster and faster. However, China wind power construction started late, which is lack of relevant experience technology. It is easy to produce quality problems. The key to the construction quality of wind power plant is the construction quality of mass concrete construction. Therefore, construction technology and quality control of wind turbine generator foundation mass concrete are discussed and analyzed in the paper.

Influence of Mobile Phones on the Quality of ECG Signal Acquired by Medical Devices

NASA Astrophysics Data System (ADS)

Buczkowski, T.; Janusek, D.; Zavala-Fernandez, H.; Skrok, M.; Kania, M.; Liebert, A.

2013-10-01

Health aspects of the use of radiating devices, like mobile phones, are still a public concern. Stand-alone electrocardiographic systems and those built-in, more sophisticated, medical devices have become a standard tool used in everyday medical practice. GSM mobile phones might be a potential source of electromagnetic interference (EMI) which may affect reliability of medical appliances. Risk of such event is particularly high in places remote from GSM base stations in which the signal received by GSM mobile phone is weak. In such locations an increase in power of transmitted radio signal is necessary to enhance quality of the communication. In consequence, the risk of interference of electronic devices increases because of the high level of EMI. In the present paper the spatial, temporal, and spectral characteristics of the interference have been examined. The influence of GSM mobile phone on multilead ECG recordings was studied. It was observed that the electrocardiographic system was vulnerable to the interference generated by the GSM mobile phone working with maximum transmit power and in DTX mode when the device was placed in a distance shorter than 7.5 cm from the ECG electrode located on the surface of the chest. Negligible EMI was encountered at any longer distance.

[Analysis and countermeasure for quality risk in process of traditional Chinese medicine preparations].

PubMed

Yang, Ming; Yang, Yuan-Zhen; Wang, Ya-Qi; Wu, Zhen-Feng; Wang, Xue-Cheng; Luo, Jing

2017-03-01

Product quality relies on not only testing methods,but also the design and development, production control and product manufacturing all aspects of logistics management. Quality comes from the process control level.Therefore, it is very important to accurately identify the factors that may induce quality risk in the production process and quality control measures correspondingly.This article systematically analyzes the source of the quality risk of all aspects of the production process in traditional Chinese medicine preparation. Discussing ways and methods of quality risk identification of traditional Chinese medicine preparation and providing references for perfecting the whole process quality management of traditional Chinese medicine preparation. Copyright© by the Chinese Pharmaceutical Association.

Growth of GaN single crystals by a Ca- and Ba-added Na flux method

NASA Astrophysics Data System (ADS)

Ukegawa, H.; Konishi, Y.; Fujimori, T.; Miyoshi, N.; Imade, M.; Yoshimura, M.; Kitaoka, Y.; Sasaki, T.; Mori, Y.

2011-02-01

GaN substrates are desirable for fabricating ultra-violet LEDs and LDs, and high-power and high-frequency transistors. High-quality GaN single crystals can be obtained by using Na flux method, but the growth habit of bulk crystals must be controlled. In this study, we investigated the effects of additives (Ca, Ba) on the growth habit and impurity concentration in the crystals. The aspect ratio (c/a) of the crystals was increased by increasing the amount of additives, showing that the growth habit could be changed from the pyramidal shape to the prism shape. Ba concentration was below the detection limit (1x1015 atoms/cm3).

Discrepant Events: A Challenge to Students' Intuition

NASA Astrophysics Data System (ADS)

González-Espada, Wilson J.; Birriel, Jennifer; Birriel, Ignacio

2010-11-01

Studies on cognitive aspects of science education, especially how students achieve conceptual change, have been a focus of interest for many years. Researchers of student learning and conceptual change have developed several easily applicable teaching strategies. One of these strategies is known as discrepant events. Discrepant events are very powerful ways to stimulate interest, motivate students to challenge their covert science misconceptions, and promote higher-order thinking skills. The key point is that directly challenging students' naive ideas will lead to more quality science learning going on in the classroom. In this paper, we summarize the research-based role of discrepant events in conceptual change and we share several highly successful discrepant events we use in our own classes.

Review of Comprehensive Evaluation Methods for Power Quality and Its Trend in New Generation Energy System

NASA Astrophysics Data System (ADS)

Liu, Ruihua; Wang, Rong; Liu, Qunying; Yang, Li; Xi, Chuan; Wang, Wei; Li, Lingzhou; Zhao, Zhoufang; Zhou, Ying

2018-02-01

With China’s new energy generation grid connected capacity being in the forefront of the world and the uncertainty of new energy sources, such as wind energy and solar energy, it is be of great significance to study scientific and comprehensive assessment of power quality. On the foundation of analysizing the current power quality index systematically and objectively, the new energy grid power quality analysis method and comprehensive evaluation method, this paper tentatively explored the trend of the new generation of energy system power quality comprehensive evaluation.

Hydrodynamic thrust generation and power consumption investigations for piezoelectric fins with different aspect ratios

NASA Astrophysics Data System (ADS)

Shahab, S.; Tan, D.; Erturk, A.

2015-12-01

Bio-inspired hydrodynamic thrust generation using piezoelectric transduction has recently been explored using Macro-Fiber Composite (MFC) actuators. The MFC technology strikes a balance between the actuation force and structural deformation levels for effective swimming performance, and additionally offers geometric scalability, silent operation, and ease of fabrication. Recently we have shown that mean thrust levels comparable to biological fish of similar size can be achieved using MFC fins. The present work investigates the effect of length-to-width (L/b) aspect ratio on the hydrodynamic thrust generation performance of MFC cantilever fins by accounting for the power consumption level. It is known that the hydrodynamic inertia and drag coefficients are controlled by the aspect ratio especially for L/b< 5. The three MFC bimorph fins explored in this work have the aspect ratios of 2.1, 3.9, and 5.4. A nonlinear electrohydroelastic model is employed to extract the inertia and drag coefficients from the vibration response to harmonic actuation for the first bending mode. Experiments are then conducted for various actuation voltage levels to quantify the mean thrust resultant and power consumption levels for different aspect ratios. Variation of the thrust coefficient of the MFC bimorph fins with changing aspect ratio is also semi-empirically modeled and presented.

Optimization study of normal conductor tokamak for commercial neutron source

NASA Astrophysics Data System (ADS)

Fujita, T.; Sakai, R.; Okamoto, A.

2017-05-01

The optimum conceptual design of tokamak with normal conductor coils was studied for minimizing the cost for producing a given neutron flux by using a system code, PEC. It is assumed that the fusion neutrons are used for burning transuranics from the fission reactor spent fuel in the blanket and a fraction of the generated electric power is circulated to opearate the tokamak with moderate plasma fusion gain. The plasma performance was assumed to be moderate ones; {β\\text{N}}~∼ ~3{--}4 in the aspect ratio A~=~2{--}3 and {{H}98y2}~=~1 . The circulating power is an important factor affecting the cost. Though decreasing the aspect ratio is useful to raise the plasma beta and decrease the toroidal field, the maximum field in the coil starts to rise in the very low aspect ratio range and then the circulating power increases with decrease in the plasma aspect ratio A below A~∼ ~2 , while the construction cost increases with A . As a result, the cost per neutron has its minimum around A~∼ ~2.2 , namely, between ST and the conventional tokamak. The average circulating power fraction is expected to be ~51%.

From Field Notes to Data Portal - A Scalable Data QA/QC Framework for Tower Networks: Progress and Preliminary Results

NASA Astrophysics Data System (ADS)

Sturtevant, C.; Hackley, S.; Lee, R.; Holling, G.; Bonarrigo, S.

2017-12-01

Quality assurance and control (QA/QC) is one of the most important yet challenging aspects of producing research-quality data. Data quality issues are multi-faceted, including sensor malfunctions, unmet theoretical assumptions, and measurement interference from humans or the natural environment. Tower networks such as Ameriflux, ICOS, and NEON continue to grow in size and sophistication, yet tools for robust, efficient, scalable QA/QC have lagged. Quality control remains a largely manual process heavily relying on visual inspection of data. In addition, notes of measurement interference are often recorded on paper without an explicit pathway to data flagging. As such, an increase in network size requires a near-proportional increase in personnel devoted to QA/QC, quickly stressing the human resources available. We present a scalable QA/QC framework in development for NEON that combines the efficiency and standardization of automated checks with the power and flexibility of human review. This framework includes fast-response monitoring of sensor health, a mobile application for electronically recording maintenance activities, traditional point-based automated quality flagging, and continuous monitoring of quality outcomes and longer-term holistic evaluations. This framework maintains the traceability of quality information along the entirety of the data generation pipeline, and explicitly links field reports of measurement interference to quality flagging. Preliminary results show that data quality can be effectively monitored and managed for a multitude of sites with a small group of QA/QC staff. Several components of this framework are open-source, including a R-Shiny application for efficiently monitoring, synthesizing, and investigating data quality issues.

Application of Autonomous Smart Inverter Volt-VAR Function for Voltage Reduction Energy Savings and Power Quality in Electric Distribution Systems: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ding, Fei; Nagarajan, Adarsh; Baggu, Murali

This paper evaluated the impact of smart inverter Volt-VAR function on voltage reduction energy saving and power quality in electric power distribution systems. A methodology to implement the voltage reduction optimization was developed by controlling the substation LTC and capacitor banks, and having smart inverters participate through their autonomous Volt-VAR control. In addition, a power quality scoring methodology was proposed and utilized to quantify the effect on power distribution system power quality. All of these methodologies were applied to a utility distribution system model to evaluate the voltage reduction energy saving and power quality under various PV penetrations and smartmore » inverter densities.« less

OSIRIS and SOMBRERO Inertial Fusion Power Plant Designs, Volume 2: Designs, Assessments, and Comparisons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W. R.; Bieri, R. L.; Monsler, M. J.

1992-03-01

This is a comprehensive design study of two Inertial Fusion Energy (IFE) electric power plants. Conceptual designs are presented for a fusion reactor (called Osiris) using an induction-linac heavy-ion beam driver, and another (called SOMBRERO) using a KrF laser driver. The designs covered all aspects of IFE power plants, including the chambers, heat transport and power conversion systems, balance-of-plant facilities, target fabrication, target injection and tracking, as well as the heavy-ion and KrF drivers. The point designs were assessed and compared in terms of their environmental & safety aspects, reliability and availability, economics, and technology development needs.

The aspect ratio effects on the performances of GaN-based light-emitting diodes with nanopatterned sapphire substrates

NASA Astrophysics Data System (ADS)

Kao, Chien-Chih; Su, Yan-Kuin; Lin, Chuing-Liang; Chen, Jian-Jhong

2010-07-01

The nanopatterned sapphire substrates (NPSSs) with aspect ratio that varied from 2.00 to 2.50 were fabricated by nanoimprint lithography. We could improve the epitaxial film quality and enhance the light extraction efficiency by NPSS technique. In this work, the aspect ratio effects on the performances of GaN-based light-emitting diodes (LEDs) with NPSS were investigated. The light output enhancement of GaN-based LEDs with NPSS was increased from 11% to 27% as the aspect ratio of the NPSS increases from 2.00 to 2.50. Owing to the same improvement of crystalline quality by using various aspect ratios of NPSS, these results indicated that the aspect ratio of the NPSS is strongly related to the light extraction efficiency.

PQScal (Power Quality Score Calculation for Distribution Systems with DER Integration)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Power Quality is of great importance to evaluate the “health” of a distribution system, especially when the distributed energy resource (DER) penetration becomes more significant. The individual components that make up power quality, such as voltage magnitude and unbalance, can be measured in simulations or in the field, however, a comprehensive method to incorporate all of these values into a single score doesn't exist. As a result, we propose a methodology to quantify the power quality health using the single number value, named as Power Quality Score (PQS). The PQS is dependent on six metrics that are developed based onmore » both components that directly impact power quality and those are often reference in the context of power quality. These six metrics are named as System Average Voltage Magnitude Violation Index (SAVMVI), System Average Voltage Fluctuation Index (SAVFI), System Average Voltage Unbalance Index (SAVUI), System Control Device Operation Index (SCDOI), System Reactive Power Demand Index (SRPDI) and System Energy Loss Index (SELI). This software tool, PQScal, is developed based on this novel PQS methodology. Besides of traditional distribution systems, PQScal can also measure the power quality for distribution systems with various DER penetrations. PQScal has been tested on two utility distribution feeders with distinct model characteristics and its effectiveness has been proved. In sum, PQScal can help utilities or other parties to measure the power quality of distribution systems with DER integration easily and effectively.« less

Quality of Life: An Exploratory Study.

ERIC Educational Resources Information Center

Lankhorst, Gustaaf J.

1989-01-01

A 12-item list of human abilities/activities was developed to measure quality of life of 9 rheumatoid arthritis adults from 2 aspects: "present condition" and "relative importance" of each item. Pilot testing indicated that importance and present condition represent different aspects. Differences between self-assessments and physicians'…

Ensuring and Improving Information Quality for Earth Science Data and Products Role of the ESIP Information Quality Cluster

NASA Technical Reports Server (NTRS)

Ramapriyan, H. K. (Rama); Peng, Ge; Moroni, David; Shie, Chung-Lin

2016-01-01

Quality of products is always of concern to users regardless of the type of products. The focus of this paper is on the quality of Earth science data products. There are four different aspects of quality scientific, product, stewardship and service. All these aspects taken together constitute Information Quality. With increasing requirement on ensuring and improving information quality, there has been considerable work related to information quality during the last several years. Given this rich background of prior work, the Information Quality Cluster (IQC), established within the Federation of Earth Science Information Partners (ESIP) has been active with membership from multiple organizations. Its objectives and activities, aimed at ensuring and improving information quality for Earth science data and products, are discussed briefly.

Ensuring and Improving Information Quality for Earth Science Data and Products: Role of the ESIP Information Quality Cluster

NASA Technical Reports Server (NTRS)

Ramapriyan, Hampapuram; Peng, Ge; Moroni, David; Shie, Chung-Lin

2016-01-01

Quality of products is always of concern to users regardless of the type of products. The focus of this paper is on the quality of Earth science data products. There are four different aspects of quality - scientific, product, stewardship and service. All these aspects taken together constitute Information Quality. With increasing requirement on ensuring and improving information quality, there has been considerable work related to information quality during the last several years. Given this rich background of prior work, the Information Quality Cluster (IQC), established within the Federation of Earth Science Information Partners (ESIP) has been active with membership from multiple organizations. Its objectives and activities, aimed at ensuring and improving information quality for Earth science data and products, are discussed briefly.

[Maintainance of a research tissue bank. (Infra)structural and quality aspects].

PubMed

Schmitt, S; Kynast, K; Schirmacher, P; Herpel, E

2015-11-01

The availability of high quality human tissue samples and access to associated histopathological and clinical data are essential for biomedical research. Therefore, it is necessary to establish quality assured tissue biobanks that provide high quality tissue samples for research purposes. This entails quality concerns referring not only to the biomaterial specimen itself but encompassing all procedures related to biobanking, including the implementation of structural components, e.g. ethical and legal guidelines, quality management documentation as well as data and project management and information technology (IT) administration. Moreover, an integral aspect of tissue biobanks is the quality assured evaluation of every tissue specimen that is stored in a tissue biobank and used for projects to guarantee high quality assured biomaterial.

Power and empowerment in nursing: three theoretical approaches.

PubMed

Kuokkanen, L; Leino-Kilpi, H

2000-01-01

Definitions and uses of the concept of empowerment are wide-ranging: the term has been used to describe the essence of human existence and development, but also aspects of organizational effectiveness and quality. The empowerment ideology is rooted in social action where empowerment was associated with community interests and with attempts to increase the power and influence of oppressed groups (such as workers, women and ethnic minorities). Later, there was also growing recognition of the importance of the individual's characteristics and actions. Based on a review of the literature, this paper explores the uses of the empowerment concept as a framework for nurses' professional growth and development. Given the complexity of the concept, it is vital to understand the underlying philosophy before moving on to define its substance. The articles reviewed were classified into three groups on the basis of their theoretical orientation: critical social theory, organization theory and social psychological theory. Empowerment seems likely to provide for an umbrella concept of professional development in nursing.

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

DOE PAGES

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; ...

2017-06-12

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by ~70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. Here, this article discusses three major aspects formore » cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.« less

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by ~70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. Here, this article discusses three major aspects formore » cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.« less

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

NASA Astrophysics Data System (ADS)

Li, Jianlin; Du, Zhijia; Ruther, Rose E.; AN, Seong Jin; David, Lamuel Abraham; Hays, Kevin; Wood, Marissa; Phillip, Nathan D.; Sheng, Yangping; Mao, Chengyu; Kalnaus, Sergiy; Daniel, Claus; Wood, David L.

2017-09-01

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by 70% from 2008 to 2015, the current battery pack cost (268/kWh in 2015) is still >2 times what the USABC targets (125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. This article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.

Effects of a Meditation Program on Nurses' Power and Quality of Life.

PubMed

Chang, Sun Ju; Kwak, Eun Young; Hahm, Bong-Jin; Seo, Se Hee; Lee, Da Woon; Jang, Sun Joo

2016-07-01

This study evaluated the effects of meditation programs on nurses' power and quality of life. In this study, Barrett's power theory derived from Rogers' unitary human being science was used as a theoretical framework. A randomized controlled design with 50 recruited and randomly allocated participants was used. The results demonstrated that the eight-week meditation program significantly improved nurses' power and quality of life. These results suggest that meditation has positive effects on power and quality of life. © The Author(s) 2016.

Strategic, Organizational and Standardization Aspects of Integrated Information Systems. Volume 6.

DTIC Science & Technology

1987-12-01

TEST CHART NATIONAL BUREAU OF STANDARDS- 1963-A Masaustt Strategic, Organizational, and Intueoyffomto TechnlogyStandardization Aspects of UJ Kowledge ...reasons (such as the desired level of processing power and the amount of storage space), organizational reasons (such as each department obtaining its...of processing power falls, Abbott can afford to subordinate efficient processing for organizational effectiveness. 4. Steps in an Analytical Process

Structural relations of convenience food satisfaction and quality of life according to dietary style: Focusing on singles in metropolitan area of Korea

PubMed Central

Kim, Boram

2014-01-01

BACKGROUND/OBJECTIVES Although the issues of singles' dietary style and quality of life are becoming important due to the increasing number of singles with economic power, little research has been conducted to date on singles' use of convenience food and quality of life in relation to their dietary style. Thus, the present study intends to provide basic data to improve the quality of life by determining the current status of the use of convenience food and explicating its relationship with quality of life through analyzing the dietary lifestyles of the singles. SUBJECTS/METHODS The targets of this study were singles, identified as adults between the ages of 25 and 54, living alone, either legally or in actuality having no partner. A statistical analysis of 208 surveys from Seoul, respectively, was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. RESULTS The convenience-oriented was shown to have a significant positive effect on convenience food satisfaction. HMR satisfaction was found to have a significant effect on positive psychological satisfaction and the convenience-oriented was found to have a significant negative effect on all aspects of quality of life satisfaction. CONCLUSIONS There must be persistent development of food industries considering the distinctive characteristics of the lives of singles in order to satisfy their needs and improve the quality of their lives. PMID:25324938

Solar Power Satellite Microwave Transmission and Reception

NASA Technical Reports Server (NTRS)

Dietz, R. H.

1980-01-01

Numerous analytical and experimental investigations related to SPS microwave power transmission and reception are reported. Aspects discussed include system performance, phase control, power amplifiers, radiating elements, rectenna, solid state configurations, and planned program activities.

Research on Holographic Evaluation of Service Quality in Power Data Network

NASA Astrophysics Data System (ADS)

Wei, Chen; Jing, Tao; Ji, Yutong

2018-01-01

With the rapid development of power data network, the continuous development of the Power data application service system, more and more service systems are being put into operation. Following this, the higher requirements for network quality and service quality are raised, in the actual process for the network operation and maintenance. This paper describes the electricity network and data network services status. A holographic assessment model was presented to achieve a comprehensive intelligence assessment on the power data network and quality of service in the operation and maintenance on the power data network. This evaluation method avoids the problems caused by traditional means which performs a single assessment of network performance quality. This intelligent Evaluation method can improve the efficiency of network operation and maintenance guarantee the quality of real-time service in the power data network..

Controllable Grid Interface for Testing Ancillary Service Controls and Fault Performance of Utility-Scale Wind Power Generation: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gevorgian, Vahan; Koralewicz, Przemyslaw; Wallen, Robb

The rapid expansion of wind power has led many transmission system operators to demand modern wind power plants to comply with strict interconnection requirements. Such requirements involve various aspects of wind power plant operation, including fault ride-through and power quality performance as well as the provision of ancillary services to enhance grid reliability. During recent years, the National Renewable Energy Laboratory (NREL) of the U.S. Department of Energy has developed a new, groundbreaking testing apparatus and methodology to test and demonstrate many existing and future advanced controls for wind generation (and other renewable generation technologies) on the multimegawatt scale andmore » medium-voltage levels. This paper describes the capabilities and control features of NREL's 7-MVA power electronic grid simulator (also called a controllable grid interface, or CGI) that enables testing many active and reactive power control features of modern wind turbine generators -- including inertial response, primary and secondary frequency responses, and voltage regulation -- under a controlled, medium-voltage grid environment. In particular, this paper focuses on the specifics of testing the balanced and unbalanced fault ride-through characteristics of wind turbine generators under simulated strong and weak medium-voltage grid conditions. In addition, this paper provides insights on the power hardware-in-the-loop feature implemented in the CGI to emulate (in real time) the conditions that might exist in various types of electric power systems under normal operations and/or contingency scenarios. Using actual test examples and simulation results, this paper describes the value of CGI as an ultimate modeling validation tool for all types of 'grid-friendly' controls by wind generation.« less

Genetics of Parenting: The Power of the Dark Side

ERIC Educational Resources Information Center

Oliver, Bonamy R.; Trzaskowski, Maciej; Plomin, Robert

2014-01-01

Reviews of behavioral genetic studies note that "control" aspects of parenting yield low estimates of heritability, while "affective" aspects (parental feelings) yield moderate estimates. Research to date has not specifically considered whether positive and negative aspects of parenting--for both feelings and control--may…

Modernization of software quality assurance

NASA Technical Reports Server (NTRS)

Bhaumik, Gokul

1988-01-01

The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

Quality assessment of data discrimination using self-organizing maps.

PubMed

Mekler, Alexey; Schwarz, Dmitri

2014-10-01

One of the important aspects of the data classification problem lies in making the most appropriate selection of features. The set of variables should be small and, at the same time, should provide reliable discrimination of the classes. The method for the discriminating power evaluation that enables a comparison between different sets of variables will be useful in the search for the set of variables. A new approach to feature selection is presented. Two methods of evaluation of the data discriminating power of a feature set are suggested. Both of the methods implement self-organizing maps (SOMs) and the newly introduced exponents of the degree of data clusterization on the SOM. The first method is based on the comparison of intraclass and interclass distances on the map. Another method concerns the evaluation of the relative number of best matching unit's (BMUs) nearest neighbors of the same class. Both methods make it possible to evaluate the discriminating power of a feature set in cases when this set provides nonlinear discrimination of the classes. Current algorithms in program code can be downloaded for free at http://mekler.narod.ru/Science/Articles_support.html, as well as the supporting data files. Copyright © 2014 Elsevier Inc. All rights reserved.

Fuel cells - a new contributor to stationary power

NASA Astrophysics Data System (ADS)

Dufour, Angelo U.

Stationary power generation historically started as distributed generation near the user, with the configuration of a very open market, where a lot of small competing utilities were offering electricity to the customers. At a second time it became a `monopolistic' business because of technical reasons. Big steam turbines and electric generators, allowing better efficiencies, were more conveniently installed in very large power plants, necessarily located in sites far away from where the power was needed, and the transmission losses were bounded by AC high voltage technology. The Governments were, therefore, trying to balance the power of monopolies, that were limiting the economical development of the countries, by strengthening the concept of electrical energy price public control and, alternatively, by establishing rules to allow a free flow of electricity from one region to the other, or taking direct control through ownership of big and small utilities. The most effective way of making the electric energy system competitive has proved to be the opening of a partial competition in the generation field by forcing the utilities to compare the cost of their energy, produced with new centralised plants, to the price of the available energy, coming from combined heat and power dispersed generators. In fact, with reference to this cost, all the peculiar features of large central stations and dispersed generators were taken into account, like the widespread use of natural gas, the investment risk reduction with single smaller increments of capacity, the transmission and distribution siting difficulties and high costs, the improved system reliability, and, finally, the high quality electric power. Fuel Cells are a recently become available technology for distributed electrical energy production, because they share the main typical aspects, relevant for a distributed power system, like compatibility with other modular subsystem packages, fully automation possibility, very low noise and emissions release, high efficiency both directly as fuel cell (38-55%) and in integrated cycles (50-65% with fossil fuels), delivered `power quality' and reliability. Focus is principally kept on the impact fuel cells could have on electrical grid management and control, for their voltage support and active filtering capabilities, for their response speed and for quick load connection capabilities. The cost for the moment is high, but some technology, like phosphoric acid, is in the market entry phase. Cost analysis for the main subsystems, that is fuel cell stacks, fuel processors, and power electronics and controls, indicates that the prices will be driven down to the required levels both through technology refinements and increase of production volumes. Anyhow, a new phase is beginning, where centralised power plants are facing the competition of distributed generators, like fuel cells, small gas turbines and internal combustion engines, and of other renewable energy generators, like photovoltaics and wind generators. They all are modular, dispersed throughout the utility distribution system to provide power closer to end user, and are not in competition with existing transmission and distribution systems, but they improve the systems' utilisation. The plants will initially be directly owned and operated by gas or energy distributors, and the customers could easily supersede their mistrusts by only paying for the energy they are really utilising, leaving away the worries about the investment costs and the risks of a bad operation. An `intelligent grid', delivering high quality electrical energy to millions of electrical household consumers, which, a second later, become non-polluting energy producers, appears to be giving a very relevant contribution to `the town of the future', envisaged also by the European Commission, where the quality of our lives is mainly depending on the quality of the energy.

An Analysis of Organizational Performance Based on Hospital Specialization Level and Strategy Type

PubMed Central

Kim, Han-Sung; Kim, Young-Hoon; Woo, Jung-Sik; Hyun, Sook-Jung

2015-01-01

Introduction Hospitals are studying the focused factory concept and attempting to increase their power in a competitive industry by becoming more specialized. Methodology This study uses the information theory index (ITI) and the Herfindahl-Hirschman index (HHI) to analyze the extent of specialization by Korean hospitals that receive national health insurance reimbursements. Hierarchical regression analysis is used to assess the impact of hospital specialization on the following four aspects of operational performance: productivity, profitability, efficiency and quality of care. Study Results The results show that a focused strategy (high HHI) improves the income and adjusted number of patients per specialist through the efficient utilization of human resources. However, a diversified strategy (high ITI) improves the hospital utilization ratio, income per bed and adjusted number of patients per bed (controlling for material resources such as beds). In addition, as the concentration index increases, case-mix mortality rates and referral rates decrease, indicating that specialization has a positive relationship with quality of care. PMID:26218570

An Analysis of Organizational Performance Based on Hospital Specialization Level and Strategy Type.

PubMed

Kim, Han-Sung; Kim, Young-Hoon; Woo, Jung-Sik; Hyun, Sook-Jung

2015-01-01

Hospitals are studying the focused factory concept and attempting to increase their power in a competitive industry by becoming more specialized. This study uses the information theory index (ITI) and the Herfindahl-Hirschman index (HHI) to analyze the extent of specialization by Korean hospitals that receive national health insurance reimbursements. Hierarchical regression analysis is used to assess the impact of hospital specialization on the following four aspects of operational performance: productivity, profitability, efficiency and quality of care. The results show that a focused strategy (high HHI) improves the income and adjusted number of patients per specialist through the efficient utilization of human resources. However, a diversified strategy (high ITI) improves the hospital utilization ratio, income per bed and adjusted number of patients per bed (controlling for material resources such as beds). In addition, as the concentration index increases, case-mix mortality rates and referral rates decrease, indicating that specialization has a positive relationship with quality of care.

Examining Some Aspects of Alternative Basic Education Programmes in Ethiopia

ERIC Educational Resources Information Center

Onwu, Gilbert O. M.; Agu, Augustine

2010-01-01

This study examines some aspects of the quality of Alternative Basic Education (ABE) provision in Ethiopia. Educational indicators of quality were formulated under two general topic areas of ABE programme process and content, and pupil learning outcomes. A qualitative-interpretative research approach and survey design was used to collect data from…

Power transformation for enhancing responsiveness of quality of life questionnaire.

PubMed

Zhou, YanYan Ange

2015-01-01

We investigate the effect of power transformation of raw scores on the responsiveness of quality of life survey. The procedure maximizes the paired t-test value on the power transformed data to obtain an optimal power range. The parallel between the Box-Cox transformation is also investigated for the quality of life data.

A conceptual disease model for adult Pompe disease.

PubMed

Kanters, Tim A; Redekop, W Ken; Rutten-Van Mölken, Maureen P M H; Kruijshaar, Michelle E; Güngör, Deniz; van der Ploeg, Ans T; Hakkaart, Leona

2015-09-15

Studies in orphan diseases are, by nature, confronted with small patient populations, meaning that randomized controlled trials will have limited statistical power. In order to estimate the effectiveness of treatments in orphan diseases and extrapolate effects into the future, alternative models might be needed. The purpose of this study is to develop a conceptual disease model for Pompe disease in adults (an orphan disease). This conceptual model describes the associations between the most important levels of health concepts for Pompe disease in adults, from biological parameters via physiological parameters, symptoms and functional indicators to health perceptions and final health outcomes as measured in terms of health-related quality of life. The structure of the Wilson-Cleary health outcomes model was used as a blueprint, and filled with clinically relevant aspects for Pompe disease based on literature and expert opinion. Multiple observations per patient from a Dutch cohort study in untreated patients were used to quantify the relationships between the different levels of health concepts in the model by means of regression analyses. Enzyme activity, muscle strength, respiratory function, fatigue, level of handicap, general health perceptions, mental and physical component scales and utility described the different levels of health concepts in the Wilson-Cleary model for Pompe disease. Regression analyses showed that functional status was affected by fatigue, muscle strength and respiratory function. Health perceptions were affected by handicap. In turn, self-reported quality of life was affected by health perceptions. We conceptualized a disease model that incorporated the mechanisms believed to be responsible for impaired quality of life in Pompe disease. The model provides a comprehensive overview of various aspects of Pompe disease in adults, which can be useful for both clinicians and policymakers to support their multi-faceted decision making.

Training staff serving clients with intellectual disabilities: a meta-analysis of aspects determining effectiveness.

PubMed

van Oorsouw, Wietske M W J; Embregts, Petri J C M; Bosman, Anna M T; Jahoda, Andrew

2009-01-01

The last decades have seen increased emphasis on the quality of training for direct-care staff serving people with intellectual disabilities. Nevertheless, it is unclear what the key aspects of effective training are. Therefore, the aim of the present meta-analysis was to establish the ingredients (i.e., goals, format, and techniques) for staff training that are related to improvements of staff behaviour. Our literature search concentrated on studies that were published in a period of 20 years. Fifty-five studies met the criteria, resulting in 502 single-subject designs and 13 n>1 designs. Results revealed important information relevant to further improvement of clinical practice: (a) the combination of in-service with coaching-on-the-job is the most powerful format, (b) in in-service formats, one should use multiple techniques, and verbal feedback is particularly recommended, and (c) in coaching-on-the-job formats, verbal feedback should be part of the program, as well as praise and correction. To maximize effectiveness, program developers should carefully prepare training goals, training format, and training techniques, which will yield a profit for clinical practice.

Multiple shell fusion targets

DOEpatents

Lindl, J.D.; Bangerter, R.O.

1975-10-31

Multiple shell fusion targets for use with electron beam and ion beam implosion systems are described. The multiple shell targets are of the low-power type and use a separate relatively low Z, low density ablator at large radius for the outer shell, which reduces the focusing and power requirements of the implosion system while maintaining reasonable aspect ratios. The targets use a high Z, high density pusher shell placed at a much smaller radius in order to obtain an aspect ratio small enough to protect against fluid instability. Velocity multiplication between these shells further lowers the power requirements. Careful tuning of the power profile and intershell density results in a low entropy implosion which allows breakeven at low powers. For example, with ion beams as a power source, breakeven at 10-20 Terrawatts with 10 MeV alpha particles for imploding a multiple shell target can be accomplished.

Quality of life in small-scaled homelike nursing homes: an 8-month controlled trial.

PubMed

Kok, Jeroen S; Nielen, Marjan M A; Scherder, Erik J A

2018-02-27

Quality of life is a clinical highly relevant outcome for residents with dementia. The question arises whether small scaled homelike facilities are associated with better quality of life than regular larger scale nursing homes do. A sample of 145 residents living in a large scale care facility were followed over 8 months. Half of the sample (N = 77) subsequently moved to a small scaled facility. Quality of life aspects were measured with the QUALIDEM and GIP before and after relocation. We found a significant Group x Time interaction on measures of anxiety meaning that residents who moved to small scale units became less anxious than residents who stayed on the regular care large-scale units. No significant differences were found on other aspects of quality of life. This study demonstrates that residents who move from a large scale facility to a small scale environment can improve an aspect of quality of life by showing a reduction in anxiety. Current Controlled Trials ISRCTN11151241 . registration date: 21-06-2017. Retrospectively registered.

Power Profiles and In Vitro Optical Quality of Scleral Contact Lenses: Effect of the Aperture and Power.

PubMed

Domínguez-Vicent, Alberto; Esteve-Taboada, Jose Juan; Recchioni, Alberto; Brautaset, Rune

2018-05-01

To assess the power profile and in vitro optical quality of scleral contact lenses with different powers as a function of the optical aperture. The mini and semiscleral contact lenses (Procornea) were measured for five powers per design. The NIMO TR-1504 (Lambda-X) was used to assess the power profile and Zernike coefficients of each contact lens. Ten measurements per lens were taken at 3- and 6-mm apertures. Furthermore, the optical quality of each lens was described in Zernike coefficients, modulation transfer function, and point spread function (PSF). A convolution of each lens PSF with an eye-chart image was also computed. The optical power fluctuated less than 0.5 diopters (D) along the optical zone of each lens. However, the optical power obtained for some lenses did not match with its corresponding nominal one, the maximum difference being 0.5 D. In optical quality, small differences were obtained among all lenses within the same design. Although significant differences were obtained among lenses (P<0.05), these showed small impact in the image quality of each convolution. Insignificant power fluctuations were obtained along the optical zone measured for each scleral lens. Additionally, the optical quality of both lenses has showed to be independent of the lens power within the same aperture.

Analytical electron microscopy in the study of biological systems.

PubMed

Johnson, D E

1986-01-01

The AEM is a powerful tool in biological research, capable of providing information simply not available by other means. The use of a field emission STEM for this application can lead to a significant improvement in spatial resolution in most cases now allowed by the quality of the specimen preparation but perhaps ultimately limited by the effects of radiation damage. Increased elemental sensitivity is at least possible in selected cases with electron energy-loss spectrometry, but fundamental aspects of ELS will probably confine its role to that of a limited complement to EDS. The considerable margin for improvement in sensitivity of the basic analytical technique means that the search for technological improvement will continue. Fortunately, however, current technology can also continue to answer important biological questions.

An efficient transmission power control scheme for temperature variation in wireless sensor networks.

PubMed

Lee, Jungwook; Chung, Kwangsue

2011-01-01

Wireless sensor networks collect data from several nodes dispersed at remote sites. Sensor nodes can be installed in harsh environments such as deserts, cities, and indoors, where the link quality changes considerably over time. Particularly, changes in transmission power may be caused by temperature, humidity, and other factors. In order to compensate for link quality changes, existing schemes detect the link quality changes between nodes and control transmission power through a series of feedback processes, but these approaches can cause heavy overhead with the additional control packets needed. In this paper, the change of the link quality according to temperature is examined through empirical experimentation. A new power control scheme combining both temperature-aware link quality compensation and a closed-loop feedback process to adapt to link quality changes is proposed. We prove that the proposed scheme effectively adapts the transmission power to the changing link quality with less control overhead and energy consumption.

Power and Attraction to the Counternormative Aspects of Infidelity.

PubMed

Lammers, Joris; Maner, Jon

2016-01-01

Previous research shows that powerful people are more likely than those lacking power to engage in infidelity. One possible explanation holds (a) that power psychologically releases people from the inhibiting effects of social norms and thus increases their appetite for counternormative forms of sexuality. Two alternative explanations are (b) that power increases appetite for any form of sexuality, normative or counternormative, and (c) that power makes men (but not women) seem more attractive to others and thus increases their access to potential mating opportunities. The current research tested these explanations using correlational data from 610 Dutch men and women. Supporting the first explanation, power's relationship with infidelity was statistically mediated by increased attraction to the secrecy associated with infidelity. Inconsistent with the second explanation, power was linked with infidelity but not with casual sex among singles (a more normative form of sexuality). Inconsistent with the third explanation, the link between power and infidelity was observed just as strongly in women as in men. Findings suggest that power may be associated with infidelity because power draws people to the counternormative aspects of infidelity. Implications for theories of power, sexuality, and gender are discussed.

Fly Ash: From Cradle to Grave

USGS Publications Warehouse

Ellis, Margaret S.; Affolter, Ronald H.

2007-01-01

The Energy Resources Program of the U.S. Geological Survey promotes and supports coal research to improve the understanding of the coal endowment of the United States. This results in geologically based, non-biased energy information products for policy and decision makers, land and resource managers, other federal and state agencies, the domestic energy industry, foreign governments, nongovernmental groups, academia, and other scientists. A more integrated approach to our coal quality work involves what we call a 'cradle to grave' approach. These types of studies focus not on just one aspect of the coal but rather on how or where different quality parameters form and (or) occur and what happens to them through the mining, production, transport, utilization and waste disposal process. An extensive suite of coal quality analyses, mineralogical, petrology, and leaching investigations are determined on samples taken from the different phases of the coal utilization process. This report consists of a tutorial that was given on June 10, 2007 at the 32nd International Technical Conference on Coal Utilization & Fuel Systems, The Power of Coal, Clearwater Coal Conference in Clearwater, Florida, USA. This tutorial covers how these studies are conducted and the importance of providing improved, comprehensive, science-based data sets for policy and decision makers.

Stakeholders' Perceptions of Quality and Potential Improvements in the Learning Resources Centers at Omani Basic Education Schools

ERIC Educational Resources Information Center

Al Musawi, Ali; Amer, Talal

2017-01-01

This study attempts to investigate the stakeholders' perceptions of quality and prospective improvements in the learning resources centres (LRC) at Omani basic education schools. It focuses on different aspects of the LRCs: organisation, human resources, technological, and educational aspects along with the difficulties faced by these LRCs and…

Investigating Adolescent Health-Related Quality of Life: From a Self-Identity Perspective

ERIC Educational Resources Information Center

Chen, Kun-Hu; Yao, Grace

2010-01-01

The aim of the study was to investigate the relation between self-identity and health-related quality of life (HRQOL) in adolescence. This study assumed that four aspects (i.e. personal, social, ability, and academic identity) of identity firmness could predict adolescent's HRQOL more than four aspects of identity importance. Meanwhile, this study…

Gender, marital power, and marital quality in later life.

PubMed

Bulanda, Jennifer Roebuck

2011-01-01

This study uses data from the 1992 Health and Retirement Study to examine gender differences in marital power and marital quality among older adults and to assess whether there are gender differences in the correlates of marital quality and marital power in later life. Results show that women report lower marital happiness, marital interaction, and marital power than do men, on average. These differences persist even after controlling for a number of life-course events and transitions. Further, results show that gender differences are also evident in the relationship of employment, childrearing, caregiving, and health factors with marital quality and power.

A Systematic Multi-Time Scale Solution for Regional Power Grid Operation

NASA Astrophysics Data System (ADS)

Zhu, W. J.; Liu, Z. G.; Cheng, T.; Hu, B. Q.; Liu, X. Z.; Zhou, Y. F.

2017-10-01

Many aspects need to be taken into consideration in a regional grid while making schedule plans. In this paper, a systematic multi-time scale solution for regional power grid operation considering large scale renewable energy integration and Ultra High Voltage (UHV) power transmission is proposed. In the time scale aspect, we discuss the problem from month, week, day-ahead, within-day to day-behind, and the system also contains multiple generator types including thermal units, hydro-plants, wind turbines and pumped storage stations. The 9 subsystems of the scheduling system are described, and their functions and relationships are elaborated. The proposed system has been constructed in a provincial power grid in Central China, and the operation results further verified the effectiveness of the system.

Engineering design aspects of the heat-pipe power system

NASA Technical Reports Server (NTRS)

Capell, B. M.; Houts, M. G.; Poston, D. I.; Berte, M.

1997-01-01

The Heat-pipe Power System (HPS) is a near-term, low-cost space power system designed at Los Alamos that can provide up to 1,000 kWt for many space nuclear applications. The design of the reactor is simple, modular, and adaptable. The basic design allows for the use of a variety of power conversion systems and reactor materials (including the fuel, clad, and heat pipes). This paper describes a project that was undertaken to develop a database supporting many engineering aspects of the HPS design. The specific tasks discussed in this paper are: the development of an HPS materials database, the creation of finite element models that will allow a wide variety of investigations, and the verification of past calculations.

Different Aspects of the Monotonicity of a Function

ERIC Educational Resources Information Center

Tossavainen, Timo; Haukkanen, Pentti; Pesonen, Martti

2013-01-01

In this paper, we investigate which aspects are overriding in the concept images of monotonicity of Finnish tertiary mathematics students, i.e., on which aspects of monotonicity they base their argument in different types of exercises related to that concept. Further, we examine the relationship between the quality of principal aspects and the…

Industrial Arts Power Mechanics. Applying Scientific Principles to Power, Energy, Force. Instructional Units.

ERIC Educational Resources Information Center

Woodward, Robert L.; Myers, Norman L.

The instructional units and related materials in this guide are designed to assist in the preparation of courses of study/instruction in (1) power mechanics specifically, (2) power mechanics which serve as introductory courses in other areas of industrial arts, and (3) automotive mechanics which also cover the broader aspects of power mechanics.…

A design of wireless sensor networks for a power quality monitoring system.

PubMed

Lim, Yujin; Kim, Hak-Man; Kang, Sanggil

2010-01-01

Power grids deal with the business of generation, transmission, and distribution of electric power. Recently, interest in power quality in electrical distribution systems has increased rapidly. In Korea, the communication network to deliver voltage, current, and temperature measurements gathered from pole transformers to remote monitoring centers employs cellular mobile technology. Due to high cost of the cellular mobile technology, power quality monitoring measurements are limited and data gathering intervals are large. This causes difficulties in providing the power quality monitoring service. To alleviate the problems, in this paper we present a communication infrastructure to provide low cost, reliable data delivery. The communication infrastructure consists of wired connections between substations and monitoring centers, and wireless connections between pole transformers and substations. For the wireless connection, we employ a wireless sensor network and design its corresponding data forwarding protocol to improve the quality of data delivery. For the design, we adopt a tree-based data forwarding protocol in order to customize the distribution pattern of the power quality information. We verify the performance of the proposed data forwarding protocol quantitatively using the NS-2 network simulator.

Power quality load management for large spacecraft electrical power systems

NASA Technical Reports Server (NTRS)

Lollar, Louis F.

1988-01-01

In December, 1986, a Center Director's Discretionary Fund (CDDF) proposal was granted to study power system control techniques in large space electrical power systems. Presented are the accomplishments in the area of power system control by power quality load management. In addition, information concerning the distortion problems in a 20 kHz ac power system is presented.

Powered off-road wheelchair for the transportation of tetraplegics along mountain trails.

PubMed

Antonelli, Michele Gabrio; Alleva, Stefano; Beomonte Zobel, Pierluigi; Durante, Francesco; Raparelli, Terenziano

2017-12-08

For off-road mobility, some manual or power assisted devices were conceived to be self-driven by paraplegics while for tetraplegics non power-assisted devices were conceived. These devices require one or more conductors who are subjected to a high physical demand thus potentially creating: precarious safety condition for the user an elevated physical demand of conductors could reduce the care and the attention to give to the user; the time of the outdoor adventure experience of the user could be limited. To address these issues, an innovative user-centered power assisted off-road wheelchair for the transportation of tetraplegics along mountain trails was developed. The device, structured like a trike, is driven by two healthy conductors; the user is placed in the middle of the frame. A movable seat provides for the transfer from the standard to the off-road wheelchair. An electrical motor, powered by a battery pack, provides for the actuation. All the design and prototype aspects, the control system and experimental tests are detailed. The prototype satisfies mechanical, safety and duration requirements. No physical demand while using the device and for the transfer of the user to the device was identified. Fun and engaging tests were carried out and all the participants were involved. Implications for Rehabilitation The device has the potential to enhance the quality of life of tetraplegics in terms of new life experiences. The device revealed the real possibility of a full recreational experience, an enhanced participation and a better social integration of tetraplegics.

Selective harmonic elimination strategy in eleven level inverter for PV system with unbalanced DC sources

NASA Astrophysics Data System (ADS)

Ghoudelbourk, Sihem.; Dib, D.; Meghni, B.; Zouli, M.

2017-02-01

The paper deals with the multilevel converters control strategy for photovoltaic system integrated in distribution grids. The objective of the proposed work is to design multilevel inverters for solar energy applications so as to reduce the Total Harmonic Distortion (THD) and to improve the power quality. The multilevel inverter power structure plays a vital role in every aspect of the power system. It is easier to produce a high-power, high-voltage inverter with the multilevel structure. The topologies of multilevel inverter have several advantages such as high output voltage, lower total harmonic distortion (THD) and reduction of voltage ratings of the power semiconductor switching devices. The proposed control strategy ensures an implementation of selective harmonic elimination (SHE) modulation for eleven levels. SHE is a very important and efficient strategy of eliminating selected harmonics by judicious selection of the firing angles of the inverter. Harmonics elimination technique eliminates the need of the expensive low pass filters in the system. Previous research considered that constant and equal DC sources with invariant behavior; however, this research extends earlier work to include variant DC sources, which are typical of lead-acid batteries when used in system PV. This Study also investigates methods to minimize the total harmonic distortion of the synthesized multilevel waveform and to help balance the battery voltage. The harmonic elimination method was used to eliminate selected lower dominant harmonics resulting from the inverter switching action.

Harriet Powers: Portrait of a Black Quilter.

ERIC Educational Resources Information Center

Frye, Gladys-Marie

1987-01-01

Discusses the following aspects of the life and art of Harriet Powers (born 1837), a Black quilter from Georgia: (1) subject matter of quilts; (2) African continuity; (3) provenance of quilts; (4) Powers' personal history; and (5) historical context of quilts. (BJV)

Mothers’ Power Assertion, Children’s Negative, Adversarial Orientation, and Future Behavior Problems in Low-Income Families: Early Maternal Responsiveness as a Moderator of the Developmental Cascade

PubMed Central

Kim, Sanghag; Kochanska, Grazyna

2014-01-01

Parental power assertion, a key dimension of family environment, generally sets in motion detrimental developmental cascades; however, evidence suggests that other qualities of parenting, such as responsiveness, can significantly moderate those processes. Mechanisms that account for such moderating effects are not fully understood. We propose a conceptual model of processes linking parental power assertion, parental responsiveness, children’s negative, adversarial, rejecting orientation toward the parent, and behavior problems. We test that model in a short-term longitudinal design involving 186 low-income, ethnically diverse mothers and their toddlers. When children were 30 months, the dyads were observed in multiple, lengthy, naturalistic laboratory interactions to assess behaviorally mothers’ responsiveness and their power-assertive control style. At 33 months, we observed behavioral indicators of children’s negative, adversarial, rejecting orientation toward the mothers in several naturalistic and standardized paradigms. At 40 months, mothers rated children’s behavior problems. The proposed moderated mediation sequence, tested using a new approach, PROCESS (Hayes, 2013), was supported. The indirect effect from maternal power assertion to children’s negative, adversarial orientation to future behavior problems was present when mothers’ responsiveness was either low or average but absent when mothers were highly responsive. This study elucidates a potential process that may link parental power assertion with behavior problems and highlights how positive aspects of parenting can moderate this process and defuse maladaptive developmental cascades. It also suggests possible targets for parenting intervention and prevention efforts. PMID:25401483

Mothers' power assertion; children's negative, adversarial orientation; and future behavior problems in low-income families: early maternal responsiveness as a moderator of the developmental cascade.

PubMed

Kim, Sanghag; Kochanska, Grazyna

2015-02-01

Parental power assertion, a key dimension of family environment, generally sets in motion detrimental developmental cascades; however, evidence suggests that other qualities of parenting, such as responsiveness, can significantly moderate those processes. Mechanisms that account for such moderating effects are not fully understood. We propose a conceptual model of processes linking parental power assertion, parental responsiveness, children's negative, adversarial, rejecting orientation toward the parent, and behavior problems. We test that model in a short-term longitudinal design involving 186 low-income, ethnically diverse mothers and their toddlers. When children were 30 months, the dyads were observed in multiple, lengthy, naturalistic laboratory interactions to assess behaviorally mothers' responsiveness and their power-assertive control style. At 33 months, we observed behavioral indicators of children's negative, adversarial, rejecting orientation toward the mothers in several naturalistic and standardized paradigms. At 40 months, mothers rated children's behavior problems. The proposed moderated mediation sequence, tested using a new approach, PROCESS (Hayes, 2013), was supported. The indirect effect from maternal power assertion to children's negative, adversarial orientation to future behavior problems was present when mothers' responsiveness was either low or average but absent when mothers were highly responsive. This study elucidates a potential process that may link parental power assertion with behavior problems and highlights how positive aspects of parenting can moderate this process and defuse maladaptive developmental cascades. It also suggests possible targets for parenting intervention and prevention efforts. PsycINFO Database Record (c) 2015 APA, all rights reserved.

Statistical aspects of quantitative real-time PCR experiment design.

PubMed

Kitchen, Robert R; Kubista, Mikael; Tichopad, Ales

2010-04-01

Experiments using quantitative real-time PCR to test hypotheses are limited by technical and biological variability; we seek to minimise sources of confounding variability through optimum use of biological and technical replicates. The quality of an experiment design is commonly assessed by calculating its prospective power. Such calculations rely on knowledge of the expected variances of the measurements of each group of samples and the magnitude of the treatment effect; the estimation of which is often uninformed and unreliable. Here we introduce a method that exploits a small pilot study to estimate the biological and technical variances in order to improve the design of a subsequent large experiment. We measure the variance contributions at several 'levels' of the experiment design and provide a means of using this information to predict both the total variance and the prospective power of the assay. A validation of the method is provided through a variance analysis of representative genes in several bovine tissue-types. We also discuss the effect of normalisation to a reference gene in terms of the measured variance components of the gene of interest. Finally, we describe a software implementation of these methods, powerNest, that gives the user the opportunity to input data from a pilot study and interactively modify the design of the assay. The software automatically calculates expected variances, statistical power, and optimal design of the larger experiment. powerNest enables the researcher to minimise the total confounding variance and maximise prospective power for a specified maximum cost for the large study. Copyright 2010 Elsevier Inc. All rights reserved.

German dentists' websites on periodontitis have low quality of information.

PubMed

Schwendicke, Falk; Stange, Jörg; Stange, Claudia; Graetz, Christian

2017-08-02

The internet is an increasingly relevant source of health information. We aimed to assess the quality of German dentists' websites on periodontitis, hypothesizing that it was significantly associated with a number of practice-specific parameters. We searched four electronic search engines and included pages which were freely accessible, posted by a dental practice in Germany, and mentioned periodontal disease/therapy. Websites were assessed for (1) technical and functional aspects, (2) generic quality and risk of bias, (3) disease-specific information. For 1 and 2, validated tools (LIDA/DISCERN) were used for assessment. For 3, we developed a criterion catalogue encompassing items on etiologic and prognostic factors for periodontitis, the diagnostic and treatment process, and the generic chance of tooth retention in periodontitis patients. Inter- and intra-rater reliabilities were largely moderate. Generalized linear modeling was used to assess the association between the information quality (measured as % of maximally available scores) and practice-specific characteristics. Seventy-one websites were included. Technical and functional aspects were reported in significantly higher quality (median: 71%, 25/75th percentiles: 67/79%) than all other aspects (p < 0.05). Generic risk of bias and most disease-specific aspects showed significantly lower reporting quality (median range was 0-40%), with poorest reporting for prognostic factors (9;0/27%), diagnostic process (0;0/33%) and chances of tooth retention (0;0/2%). We found none of the practice-specific parameters to have significant impact on the overall quality of the websites. Most German dentists' websites on periodontitis are not fully trustworthy and relevant information are not or insufficiently considered. There is great need to improve the information quality from such websites at least with regards to periodontitis.

Human aspects of air quality in the San Bernardino Mountains

Treesearch

P.L. Winter

1999-01-01

The preceding chapters of this book have provided infomation on the ecological characteristics of the San Bernardino Mountains, as well as the effects of ozone and other air pollutants on vegetation and soil in the San Bernardinos, and additional interactions with air pollution and forest health. This chapter focuses on the human aspects of air quality in the San...

Rectenna session: Micro aspects

NASA Technical Reports Server (NTRS)

Gutmann, R. J.

1980-01-01

Two micro aspects of rectenna design are discussed: evaluation of the degradation in net rectenna RF to DC conversion efficiency due to power density variations across the rectenna (power combining analysis) and design of Yagi-Uda receiving elements to reduce rectenna cost by decreasing the number of conversion circuits (directional receiving elements). The first of these involves resolving a fundamental question of efficiency potential with a rectenna, while the second involves a design modification with a large potential cost saving.

The Relationship between Supervisors' Power Bases and Supervisory Styles

ERIC Educational Resources Information Center

Tanaka, Hideyuki

2009-01-01

Despite its critical role in counselor training, empirical research on clinical supervision is generally limited (Bernard & Goodyear, 2003; Ellis & Ladany, 2007). This is also applied to an area of power dynamics in supervision. This study tested the relationship between the two aspects of power dynamics; namely, supervisors' power bases (i.e.,…

Evaluating Health Information Systems Using Ontologies

PubMed Central

Anderberg, Peter; Larsson, Tobias C; Fricker, Samuel A; Berglund, Johan

2016-01-01

Background There are several frameworks that attempt to address the challenges of evaluation of health information systems by offering models, methods, and guidelines about what to evaluate, how to evaluate, and how to report the evaluation results. Model-based evaluation frameworks usually suggest universally applicable evaluation aspects but do not consider case-specific aspects. On the other hand, evaluation frameworks that are case specific, by eliciting user requirements, limit their output to the evaluation aspects suggested by the users in the early phases of system development. In addition, these case-specific approaches extract different sets of evaluation aspects from each case, making it challenging to collectively compare, unify, or aggregate the evaluation of a set of heterogeneous health information systems. Objectives The aim of this paper is to find a method capable of suggesting evaluation aspects for a set of one or more health information systems—whether similar or heterogeneous—by organizing, unifying, and aggregating the quality attributes extracted from those systems and from an external evaluation framework. Methods On the basis of the available literature in semantic networks and ontologies, a method (called Unified eValuation using Ontology; UVON) was developed that can organize, unify, and aggregate the quality attributes of several health information systems into a tree-style ontology structure. The method was extended to integrate its generated ontology with the evaluation aspects suggested by model-based evaluation frameworks. An approach was developed to extract evaluation aspects from the ontology that also considers evaluation case practicalities such as the maximum number of evaluation aspects to be measured or their required degree of specificity. The method was applied and tested in Future Internet Social and Technological Alignment Research (FI-STAR), a project of 7 cloud-based eHealth applications that were developed and deployed across European Union countries. Results The relevance of the evaluation aspects created by the UVON method for the FI-STAR project was validated by the corresponding stakeholders of each case. These evaluation aspects were extracted from a UVON-generated ontology structure that reflects both the internally declared required quality attributes in the 7 eHealth applications of the FI-STAR project and the evaluation aspects recommended by the Model for ASsessment of Telemedicine applications (MAST) evaluation framework. The extracted evaluation aspects were used to create questionnaires (for the corresponding patients and health professionals) to evaluate each individual case and the whole of the FI-STAR project. Conclusions The UVON method can provide a relevant set of evaluation aspects for a heterogeneous set of health information systems by organizing, unifying, and aggregating the quality attributes through ontological structures. Those quality attributes can be either suggested by evaluation models or elicited from the stakeholders of those systems in the form of system requirements. The method continues to be systematic, context sensitive, and relevant across a heterogeneous set of health information systems. PMID:27311735

Evaluating Health Information Systems Using Ontologies.

PubMed

Eivazzadeh, Shahryar; Anderberg, Peter; Larsson, Tobias C; Fricker, Samuel A; Berglund, Johan

2016-06-16

There are several frameworks that attempt to address the challenges of evaluation of health information systems by offering models, methods, and guidelines about what to evaluate, how to evaluate, and how to report the evaluation results. Model-based evaluation frameworks usually suggest universally applicable evaluation aspects but do not consider case-specific aspects. On the other hand, evaluation frameworks that are case specific, by eliciting user requirements, limit their output to the evaluation aspects suggested by the users in the early phases of system development. In addition, these case-specific approaches extract different sets of evaluation aspects from each case, making it challenging to collectively compare, unify, or aggregate the evaluation of a set of heterogeneous health information systems. The aim of this paper is to find a method capable of suggesting evaluation aspects for a set of one or more health information systems-whether similar or heterogeneous-by organizing, unifying, and aggregating the quality attributes extracted from those systems and from an external evaluation framework. On the basis of the available literature in semantic networks and ontologies, a method (called Unified eValuation using Ontology; UVON) was developed that can organize, unify, and aggregate the quality attributes of several health information systems into a tree-style ontology structure. The method was extended to integrate its generated ontology with the evaluation aspects suggested by model-based evaluation frameworks. An approach was developed to extract evaluation aspects from the ontology that also considers evaluation case practicalities such as the maximum number of evaluation aspects to be measured or their required degree of specificity. The method was applied and tested in Future Internet Social and Technological Alignment Research (FI-STAR), a project of 7 cloud-based eHealth applications that were developed and deployed across European Union countries. The relevance of the evaluation aspects created by the UVON method for the FI-STAR project was validated by the corresponding stakeholders of each case. These evaluation aspects were extracted from a UVON-generated ontology structure that reflects both the internally declared required quality attributes in the 7 eHealth applications of the FI-STAR project and the evaluation aspects recommended by the Model for ASsessment of Telemedicine applications (MAST) evaluation framework. The extracted evaluation aspects were used to create questionnaires (for the corresponding patients and health professionals) to evaluate each individual case and the whole of the FI-STAR project. The UVON method can provide a relevant set of evaluation aspects for a heterogeneous set of health information systems by organizing, unifying, and aggregating the quality attributes through ontological structures. Those quality attributes can be either suggested by evaluation models or elicited from the stakeholders of those systems in the form of system requirements. The method continues to be systematic, context sensitive, and relevant across a heterogeneous set of health information systems.

A simulated field trip: "The visual aspects of power plant sitings"

Treesearch

Bill Bottomly; Alex Young

1979-01-01

The growth of our economy is demanding construction of a variety of power plants to generate electricity which is having a significant impact on the visual environment. These power plants will consist of conventional thermal (fossil fuel and nuclear), geothermal, wind and solar power plants. There are several areas where solutions to the visual impacts of these power...

Operational readiness for conducting global health research abroad.

PubMed

McDonald, Judy M; Gyorkos, Theresa W

2016-12-27

Research excellence is the goal of all researchers. Conducting quality research with the ultimate aim of improving health is a shared goal among researchers in the global health domain. The competencies required for conducting and producing quality research in global health go far beyond the academic or scientific spheres. They incorporate aspects of research partnership, which places humility, empathy, and mutual respect at its core. Conducting quality respectful global health research requires an appropriate balance of operational readiness (i.e., technical, physical, and mental readiness). This paper reports on the pertinence and potential shaping of conceptual work and exploratory research focusing on aspects of mental readiness. These aspects may be perceived to be significant enough to influence success and warrant further investigation in the context of conducting global health research abroad.

Isolated Power Generation System Using Permanent Magnet Synchronous Generator with Improved Power Quality

NASA Astrophysics Data System (ADS)

Arya, Sabha Raj; Patel, Ashish; Giri, Ashutosh

2018-06-01

This paper deals wind energy based power generation system using Permanent Magnet Synchronous Generator (PMSG). It is controlled using advanced enhanced phase-lock loop for power quality features using distribution static compensator to eliminate the harmonics and to provide KVAR compensation as well as load balancing. It also manages rated potential at the point of common interface under linear and non-linear loads. In order to have better efficiency and reliable operation of PMSG driven by wind turbine, it is necessary to analyze the governing equation of wind based turbine and PMSG under fixed and variable wind speed. For handling power quality problems, power electronics based shunt connected custom power device is used in three wire system. The simulations in MATLAB/Simulink environment have been carried out in order to demonstrate this model and control approach used for the power quality enhancement. The performance results show the adequate performance of PMSG based power generation system and control algorithm.

Isolated Power Generation System Using Permanent Magnet Synchronous Generator with Improved Power Quality

NASA Astrophysics Data System (ADS)

Arya, Sabha Raj; Patel, Ashish; Giri, Ashutosh

2018-03-01

This paper deals wind energy based power generation system using Permanent Magnet Synchronous Generator (PMSG). It is controlled using advanced enhanced phase-lock loop for power quality features using distribution static compensator to eliminate the harmonics and to provide KVAR compensation as well as load balancing. It also manages rated potential at the point of common interface under linear and non-linear loads. In order to have better efficiency and reliable operation of PMSG driven by wind turbine, it is necessary to analyze the governing equation of wind based turbine and PMSG under fixed and variable wind speed. For handling power quality problems, power electronics based shunt connected custom power device is used in three wire system. The simulations in MATLAB/Simulink environment have been carried out in order to demonstrate this model and control approach used for the power quality enhancement. The performance results show the adequate performance of PMSG based power generation system and control algorithm.

Why do electricity policy and competitive markets fail to use advanced PV systems to improve distribution power quality?

DOE Office of Scientific and Technical Information (OSTI.GOV)

McHenry, Mark P.; Johnson, Jay; Hightower, Mike

The increasing pressure for network operators to meet distribution network power quality standards with increasing peak loads, renewable energy targets, and advances in automated distributed power electronics and communications is forcing policy-makers to understand new means to distribute costs and benefits within electricity markets. Discussions surrounding how distributed generation (DG) exhibits active voltage regulation and power factor/reactive power control and other power quality capabilities are complicated by uncertainties of baseline local distribution network power quality and to whom and how costs and benefits of improved electricity infrastructure will be allocated. DG providing ancillary services that dynamically respond to the networkmore » characteristics could lead to major network improvements. With proper market structures renewable energy systems could greatly improve power quality on distribution systems with nearly no additional cost to the grid operators. Renewable DG does have variability challenges, though this issue can be overcome with energy storage, forecasting, and advanced inverter functionality. This paper presents real data from a large-scale grid-connected PV array with large-scale storage and explores effective mitigation measures for PV system variability. As a result, we discuss useful inverter technical knowledge for policy-makers to mitigate ongoing inflation of electricity network tariff components by new DG interconnection requirements or electricity markets which value power quality and control.« less

Why do electricity policy and competitive markets fail to use advanced PV systems to improve distribution power quality?

DOE PAGES

McHenry, Mark P.; Johnson, Jay; Hightower, Mike

2016-01-01

The increasing pressure for network operators to meet distribution network power quality standards with increasing peak loads, renewable energy targets, and advances in automated distributed power electronics and communications is forcing policy-makers to understand new means to distribute costs and benefits within electricity markets. Discussions surrounding how distributed generation (DG) exhibits active voltage regulation and power factor/reactive power control and other power quality capabilities are complicated by uncertainties of baseline local distribution network power quality and to whom and how costs and benefits of improved electricity infrastructure will be allocated. DG providing ancillary services that dynamically respond to the networkmore » characteristics could lead to major network improvements. With proper market structures renewable energy systems could greatly improve power quality on distribution systems with nearly no additional cost to the grid operators. Renewable DG does have variability challenges, though this issue can be overcome with energy storage, forecasting, and advanced inverter functionality. This paper presents real data from a large-scale grid-connected PV array with large-scale storage and explores effective mitigation measures for PV system variability. As a result, we discuss useful inverter technical knowledge for policy-makers to mitigate ongoing inflation of electricity network tariff components by new DG interconnection requirements or electricity markets which value power quality and control.« less

Family Life Quality and Emotional Quality of Life in Chinese Adolescents with and without Economic Disadvantage

ERIC Educational Resources Information Center

Shek, Daniel T. L.; Lee, T. Y.

2007-01-01

Chinese secondary school students (N = 2758) responded to measures of perceived family life quality (parenting quality and parent-child relational quality) and emotional quality of life (hopelessness, mastery, life satisfaction and self-esteem). Parenting quality included different aspects of parental behavioral control (parental knowledge,…

Older Patients' Perspectives on Quality of Serious Illness Care in Primary Care.

PubMed

Abu Al Hamayel, Nebras; Isenberg, Sarina R; Hannum, Susan M; Sixon, Joshua; Smith, Katherine Clegg; Dy, Sydney M

2018-01-01

Despite increased focus on measuring and improving quality of serious illness care, there has been little emphasis on the primary care context or incorporation of the patient perspective. To explore older patients' perspectives on the quality of serious illness care in primary care. Qualitative interview study. Twenty patients aged 60 or older who were at risk for or living with serious illness and who had participated in the clinic's quality improvement initiative. We used a semistructured, open-ended guide focusing on how older patients perceived quality of serious illness care, particularly in primary care. We transcribed interviews verbatim and inductively identified codes. We identified emergent themes using a thematic and constant comparative method. We identified 5 key themes: (1) the importance of patient-centered communication, (2) coordination of care, (3) the shared decision-making process, (4) clinician competence, and (5) access to care. Communication was an overarching theme that facilitated coordination of care between patients and their clinicians, empowered patients for shared decision-making, related to clinicians' perceived competence, and enabled access to primary and specialty care. Although access to care is not traditionally considered an aspect of quality, patients considered this integral to the quality of care they received. Patients perceived serious illness care as a key aspect of quality in primary care. Efforts to improve quality measurement and implementation of quality improvement initiatives in serious illness care should consider these aspects of care that patients deem important, particularly communication as an overarching priority.

Effective Communication, Critical Aspects and Compositionality in Algebra

ERIC Educational Resources Information Center

Olteanu, Lucian

2014-01-01

This paper contains a discussion of how the concept of critical aspects and the principle of compositionality can provide a powerful tool to analyse and understand the communications that occur in the classroom. It is grounded in data collected in a longitudinal study. The content chosen is algebra. It is argued that the critical aspects and the…

MATLAB Simulation of UPQC for Power Quality Mitigation Using an Ant Colony Based Fuzzy Control Technique

PubMed Central

Kumarasabapathy, N.; Manoharan, P. S.

2015-01-01

This paper proposes a fuzzy logic based new control scheme for the Unified Power Quality Conditioner (UPQC) for minimizing the voltage sag and total harmonic distortion in the distribution system consequently to improve the power quality. UPQC is a recent power electronic module which guarantees better power quality mitigation as it has both series-active and shunt-active power filters (APFs). The fuzzy logic controller has recently attracted a great deal of attention and possesses conceptually the quality of the simplicity by tackling complex systems with vagueness and ambiguity. In this research, the fuzzy logic controller is utilized for the generation of reference signal controlling the UPQC. To enable this, a systematic approach for creating the fuzzy membership functions is carried out by using an ant colony optimization technique for optimal fuzzy logic control. An exhaustive simulation study using the MATLAB/Simulink is carried out to investigate and demonstrate the performance of the proposed fuzzy logic controller and the simulation results are compared with the PI controller in terms of its performance in improving the power quality by minimizing the voltage sag and total harmonic distortion. PMID:26504895

Quality management in in vivo proton MRS.

PubMed

Pedrosa de Barros, Nuno; Slotboom, Johannes

2017-07-15

The quality of MR-Spectroscopy data can easily be affected in in vivo applications. Several factors may produce signal artefacts, and often these are not easily detected, not even by experienced spectroscopists. Reliable and reproducible in vivo MRS-data requires the definition of quality requirements and goals, implementation of measures to guarantee quality standards, regular control of data quality, and a continuous search for quality improvement. The first part of this review includes a general introduction to different aspects of quality management in MRS. It is followed by the description of a series of tests and phantoms that can be used to assure the quality of the MR system. In the third part, several methods and strategies used for quality control of the spectroscopy data are presented. This review concludes with a reference to a few interesting techniques and aspects that may help to further improve the quality of in vivo MR-spectra. Copyright © 2017 Elsevier Inc. All rights reserved.

Preface to QoIS 2009

NASA Astrophysics Data System (ADS)

Comyn-Wattiau, Isabelle; Thalheim, Bernhard

Quality assurance is a growing research domain within the Information Systems (IS) and Conceptual Modeling (CM) disciplines. Ongoing research on quality in IS and CM is highly diverse and encompasses theoretical aspects including quality definition and quality models, and practical/empirical aspects such as the development of methods, approaches and tools for quality measurement and improvement. Current research on quality also includes quality characteristics definitions, validation instruments, methodological and development approaches to quality assurance during software and information systems development, quality monitors, quality assurance during information systems development processes and practices, quality assurance both for data and (meta)schemata, quality support for information systems data import and export, quality of query answering, and cost/benefit analysis of quality assurance processes. Quality assurance is also depending on the application area and the specific requirements in applications such as health sector, logistics, public sector, financial sector, manufacturing, services, e-commerce, software, etc. Furthermore, quality assurance must also be supported for data aggregation, ETL processes, web content management and other multi-layered applications. Quality assurance is typically requiring resources and has therefore beside its benefits a computational and economical trade-off. It is therefore also based on compromising between the value of quality data and the cost for quality assurance.

Aspects of Quality of Life in Adults Diagnosed with Autism in Childhood: A Population-Based Study

ERIC Educational Resources Information Center

Billstedt, Eva; Gillberg, I. Carina; Gillberg, Christopher

2011-01-01

The present study is a long-term prospective follow-up study of a population-based cohort of 120 individuals diagnosed with autism in childhood, followed into late adolescence/early adulthood. Specific aims of the study were to attempt to measure and study social aspects/quality of life in those 108 individuals with autism alive and available for…

Multiple Aspects of High School Students' Strategic Processing on Reading Outcomes: The Role of Quantity, Quality, and Conjunctive Strategy Use

ERIC Educational Resources Information Center

Parkinson, Meghan M.; Dinsmore, Daniel L.

2018-01-01

Background: While the literature on strategy use is relatively mature, measures of strategy use overwhelmingly measure only one aspect of that use, frequency, when relating that strategy use to performance outcomes. While this might be one important attribute of strategy use, there is increasing evidence that quality and conditional use of…

"I Don't Want to Die like that...": The Impact of Significant Others' Death Quality on Advance Care Planning

ERIC Educational Resources Information Center

Carr, Deborah

2012-01-01

Purpose of the Study: I examine whether 5 aspects of a significant other's death quality (pain, decision-making capacity, location, problems with end-of life care, and preparation) affect whether one does advance care planning (ACP). I also identify specific aspects of others' deaths that respondents say triggered their own planning. Design and…

Genomics meets applied ecology: Characterizing habitat quality for sloths in a tropical agroecosystem.

PubMed

Fountain, Emily D; Kang, Jung Koo; Tempel, Douglas J; Palsbøll, Per J; Pauli, Jonathan N; Zachariah Peery, M

2018-01-01

Understanding how habitat quality in heterogeneous landscapes governs the distribution and fitness of individuals is a fundamental aspect of ecology. While mean individual fitness is generally considered a key to assessing habitat quality, a comprehensive understanding of habitat quality in heterogeneous landscapes requires estimates of dispersal rates among habitat types. The increasing accessibility of genomic approaches, combined with field-based demographic methods, provides novel opportunities for incorporating dispersal estimation into assessments of habitat quality. In this study, we integrated genomic kinship approaches with field-based estimates of fitness components and approximate Bayesian computation (ABC) procedures to estimate habitat-specific dispersal rates and characterize habitat quality in two-toed sloths (Choloepus hoffmanni) occurring in a Costa Rican agricultural ecosystem. Field-based observations indicated that birth and survival rates were similar in a sparsely shaded cacao farm and adjacent cattle pasture-forest mosaic. Sloth density was threefold higher in pasture compared with cacao, whereas home range size and overlap were greater in cacao compared with pasture. Dispersal rates were similar between the two habitats, as estimated using ABC procedures applied to the spatial distribution of pairs of related individuals identified using 3,431 single nucleotide polymorphism and 11 microsatellite locus genotypes. Our results indicate that crops produced under a sparse overstorey can, in some cases, constitute lower-quality habitat than pasture-forest mosaics for sloths, perhaps because of differences in food resources or predator communities. Finally, our study demonstrates that integrating field-based demographic approaches with genomic methods can provide a powerful means for characterizing habitat quality for animal populations occurring in heterogeneous landscapes. © 2017 John Wiley & Sons Ltd.

Modeling and Performance Analysis of 10 Gbps Inter-satellite Optical Wireless Communication Link

NASA Astrophysics Data System (ADS)

Singh, Mehtab

2017-12-01

Free-space optical (FSO) communication has the advantages of two of the most predominant data transmission technologies - optical fiber communication and wireless communication. Most of the technical aspects of FSO are similar to that of optical fiber communication, with major difference in the information signal propagation medium which is free space in case of FSO rather than silica glass in optical fiber communication. One of the most important applications of FSO is inter-satellite optical wireless communication (IsOWC) links which will be deployed in the future in space. The IsOWC links have many advantages over the previously existing microwave satellite communication technologies such as higher bandwidth, lower power consumption, low cost of implementation, light size, and weight. In this paper, modeling and performance analysis of a 10-Gbps inter-satellite communication link with two satellites separated at a distance of 1,200 km has been done using OPTISYSTEM simulation software. Performance has been analyzed on the basis of quality factor, signal to noise ratio (SNR), and total power of the received signal.

Design and Performance of the Antenna-Coupled Lumped-Element Kinetic Inductance Detector

NASA Astrophysics Data System (ADS)

Barry, P. S.; Doyle, S.; Hornsby, A. L.; Kofman, A.; Mayer, E.; Nadolski, A.; Tang, Q. Y.; Vieira, J.; Shirokoff, E.

2018-05-01

Focal plane arrays consisting of low-noise, polarisation-sensitive detectors have made possible the pioneering advances in the study of the cosmic microwave background (CMB). To make further progress, the next generation of CMB experiments (e.g. CMB-S4) will require a substantial increase in the number of detectors compared to current instruments. Arrays of kinetic inductance detectors (KIDs) provide a possible path to realising such large-format arrays owing to their intrinsic multiplexing advantage and relative cryogenic simplicity. In this paper, we report on the design of a variant of the traditional KID design: the antenna-coupled lumped-element KID. A polarisation-sensitive twin-slot antenna placed behind an optimised hemispherical lens couples power onto a thin-film superconducting microstrip line. The power is then guided into the inductive section of an aluminium KID, where it is absorbed and modifies both the resonant frequency and quality factor of the KID. We present the various aspects of the design and preliminary results from the first set of seven-element prototype arrays and compare to the expected modelled performance.

State of the art metrics for aspect oriented programming

NASA Astrophysics Data System (ADS)

Ghareb, Mazen Ismaeel; Allen, Gary

2018-04-01

The quality evaluation of software, e.g., defect measurement, gains significance with higher use of software applications. Metric measurements are considered as the primary indicator of imperfection prediction and software maintenance in various empirical studies of software products. However, there is no agreement on which metrics are compelling quality indicators for novel development approaches such as Aspect Oriented Programming (AOP). AOP intends to enhance programming quality, by providing new and novel constructs for the development of systems, for example, point cuts, advice and inter-type relationships. Hence, it is not evident if quality pointers for AOP can be derived from direct expansions of traditional OO measurements. Then again, investigations of AOP do regularly depend on established coupling measurements. Notwithstanding the late reception of AOP in empirical studies, coupling measurements have been adopted as useful markers of flaw inclination in this context. In this paper we will investigate the state of the art metrics for measurement of Aspect Oriented systems development.

Research on spacecraft electrical power conversion

NASA Technical Reports Server (NTRS)

Wilson, T. G.

1983-01-01

The history of spacecraft electrical power conversion in literature, research and practice is reviewed. It is noted that the design techniques, analyses and understanding which were developed make today's contribution to power computers and communication installations. New applications which require more power, improved dynamic response, greater reliability, and lower cost are outlined. The switching mode approach in electronic power conditioning is discussed. Technical aspects of the research are summarized.

Electrical Power Station Theory. A Course of Technical Information for Electrical Power Station Wireman Apprentices. Revised Edition.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This third-year course for electrical power station wirer apprentices is a foundation for the study of all aspects of installation and maintenance of power station equipment. It also provides a good technical background as well as the general knowledge essential to power station operator trainees. The course is intended to be equivalent to a…

Development of Asset Management Decision Support Tools for Power Equipment

NASA Astrophysics Data System (ADS)

Okamoto, Tatsuki; Takahashi, Tsuguhiro

Development of asset management decision support tools become very intensive in order to reduce maintenance cost of power equipment due to the liberalization of power business. This article reviews some aspects of present status of asset management decision support tools development for power equipment based on the papers published in international conferences, domestic conventions, and several journals.

State and prospects of solid propellant rocket development

NASA Astrophysics Data System (ADS)

Kukushkin, V. Kh.

1992-07-01

An overview is presented of aspects of solid-propellant rocket engine (SPRE) development with individual treatment given to sustainer and spacecraft SPRE technologies. The paper focuses on low-modulus fuels of composite solid propellant, requirements for adhesion stability, and enhancement of the power characteristics of solid propellants. R&D activities are described that relate to the use of SPREs with extending nozzles and to the design of ultradimensional nozzles for upper-stage engines. Other developments for the SPREs include engines with separate loading and pasty fuel applications, and progress is reported in the direction of detonation SPREs. The SPREs using pasty propellants provide good control over thrust characteristics and fuel qualities. A device is incorporated that assures fuel burning in the combustion region and reliable ignition during restarting of these engines.

A multi-agent approach to intelligent monitoring in smart grids

NASA Astrophysics Data System (ADS)

Vallejo, D.; Albusac, J.; Glez-Morcillo, C.; Castro-Schez, J. J.; Jiménez, L.

2014-04-01

In this paper, we propose a scalable multi-agent architecture to give support to smart grids, paying special attention to the intelligent monitoring of distribution substations. The data gathered by multiple sensors are used by software agents that are responsible for monitoring different aspects or events of interest, such as normal voltage values or unbalanced intensity values that can end up blowing fuses and decreasing the quality of service of end consumers. The knowledge bases of these agents have been built by means of a formal model for normality analysis that has been successfully used in other surveillance domains. The architecture facilitates the integration of new agents and can be easily configured and deployed to monitor different environments. The experiments have been conducted over a power distribution network.

The power of friendship: protection against an escalating cycle of peer victimization.

PubMed

Hodges, E V; Boivin, M; Vitaro, F; Bukowski, W M

1999-01-01

This study examined 2 aspects of friendship (presence and perceived qualities of a best friend) as moderators of behavioral antecedents and outcomes of peer victimization. A total of 393 children (188 boys and 205 girls) in the 4th and 5th grades (mean age = 10 years 7 months) participated during each of 2 waves of data collection in this 1-year longitudinal study. Results indicated that teacher-reported internalizing and externalizing behaviors predicted increases in peer-reported victimization, but the relation of internalizing behaviors to increases in victimization was attenuated for children with a protective friendship. Victimization predicted increases in internalizing and externalizing behaviors but only for children without a mutual best friendship. Results highlight the importance of peer friendships in preventing an escalating cycle of peer abuse.

Regional air quality management aspects of climate change: impact of climate mitigation options on regional air emissions.

PubMed

Rudokas, Jason; Miller, Paul J; Trail, Marcus A; Russell, Armistead G

2015-04-21

We investigate the projected impact of six climate mitigation scenarios on U.S. emissions of carbon dioxide (CO2), sulfur dioxide (SO2), and nitrogen oxides (NOX) associated with energy use in major sectors of the U.S. economy (commercial, residential, industrial, electricity generation, and transportation). We use the EPA U.S. 9-region national database with the MARKet Allocation energy system model to project emissions changes over the 2005 to 2050 time frame. The modeled scenarios are two carbon tax, two low carbon transportation, and two biomass fuel choice scenarios. In the lower carbon tax and both biomass fuel choice scenarios, SO2 and NOX achieve reductions largely through pre-existing rules and policies, with only relatively modest additional changes occurring from the climate mitigation measures. The higher carbon tax scenario projects greater declines in CO2 and SO2 relative to the 2050 reference case, but electricity sector NOX increases. This is a result of reduced investments in power plant NOX controls in earlier years in anticipation of accelerated coal power plant retirements, energy penalties associated with carbon capture systems, and shifting of NOX emissions in later years from power plants subject to a regional NOX cap to those in regions not subject to the cap.

Ensuring quality in studies linking cancer registries and biobanks.

PubMed

Langseth, Hilde; Luostarinen, Tapio; Bray, Freddie; Dillner, Joakim

2010-04-01

The Nordic countries have a long tradition of providing comparable and high quality cancer data through the national population-based cancer registries and the capability to link the diverse large-scale biobanks currently in operation. The joining of these two infrastructural resources can provide a study base for large-scale studies of etiology, treatment and early detection of cancer. Research projects based on combined data from cancer registries and biobanks provides great opportunities, but also presents major challenges. Biorepositories have become an important resource in molecular epidemiology, and the increased interest in performing etiological, clinical and gene-environment-interaction studies, involving information from biological samples linked to population-based cancer registries, warrants a joint evaluation of the quality aspects of the two resources, as well as an assessment of whether the resources can be successfully combined into a high quality study. While the quality of biospecimen handling and analysis is commonly considered in different studies, the logistics of data handling including the linkage of the biobank with the cancer registry is an overlooked aspect of a biobank-based study. It is thus the aim of this paper to describe recommendations on data handling, in particular the linkage of biobank material to cancer registry data and the quality aspects thereof, based on the experience of Nordic collaborative projects combining data from cancer registries and biobanks. We propose a standard documentation with respect to the following topics: the quality control aspects of cancer registration, the identification of cases and controls, the identification and use of data confounders, the stability of serum components, historical storage conditions, aliquoting history, the number of freeze/thaw cycles and available volumes.

Patients' evaluation of hospital foodservice quality in Italy: what do patients really value?

PubMed

Messina, Gabriele; Fenucci, Roberto; Vencia, Francesco; Niccolini, Fabrizio; Quercioli, Cecilia; Nante, Nicola

2013-04-01

Patients often do not eat/drink enough during hospitalization. To enable patients to meet their energy and nutritional requirements, food and catering service quality and staff support are therefore important. We assessed patients' satisfaction with hospital food and investigated aspects influencing it. We conducted a cross-sectional study collecting patients' preferences using a slightly modified version of the Acute Care Hospital Foodservice Patient Satisfaction Questionnaire (ACHFPSQ). Factor analysis was carried out to reduce the number of food-quality and staff-issue variables. Univariate and multivariate ordinal categorical regression models were used to assess the association between food quality, staff issues, patients' characteristics, hospital recovery aspects and overall foodservice satisfaction (OS). A university hospital in Florence, Italy, in the period November-December 2009. Hospital patients aged 18+ years (n 927). Of the 1288 questionnaires distributed, 927 were returned completely or partially filled in by patients and 603 were considered eligible for analysis. Four factors (explained variance 64·3 %, Cronbach's alpha α(C) = 0.856), i.e. food quality (FQ; α(C) = 0·74), meal service quality (MSQ; α(C) = 0·73), hunger and quantity (HQ; α(C) = 0·74) and staff/service issues (SI; α(C) = 0·65), were extracted from seventeen items. Items investigating staff/service issues were the most positively rated while certain items investigating food quality were the least positively rated. After ordinal multiple regression analysis, OS was only significantly associated with the four factors: FQ, MSQ, HQ and SI (OR = 17·2, 6·16, 3·09 and 1·75, respectively, P < 0·001), and gender (OR = 1·53, P = 0·024). The most positively scored aspects of foodservice concerned staff/service, whereas food quality was considered less positive. The aspects that most influenced patients' satisfaction were those related to food quality.

On Quality in Education

ERIC Educational Resources Information Center

Doherty, Geoffrey D.

2008-01-01

Purpose: The purpose of this paper is to discuss some key aspects of quality in education in the light of over 30 years practical experience of doing quality assurance (QA). Design/methodology/approach: Reflection on three concepts, which are still the subject of debate, namely: "quality"; "total quality management (TQM)"; and…

Multiple aspects of high school students' strategic processing on reading outcomes: The role of quantity, quality, and conjunctive strategy use.

PubMed

Parkinson, Meghan M; Dinsmore, Daniel L

2018-03-01

While the literature on strategy use is relatively mature, measures of strategy use overwhelmingly measure only one aspect of that use, frequency, when relating that strategy use to performance outcomes. While this might be one important attribute of strategy use, there is increasing evidence that quality and conditional use of cognitive and metacognitive strategies may also be important. This study examines how multiple aspects of strategy use, namely frequency, quality, and conjunctive use of strategies, influence task performance on both well- and ill-structured task outcomes in addition to other concomitant variables that may interact with strategic processing during reading. The sample consisted of 21 high school students enrolled in an upper-level biology class in a suburban school in the north-eastern United States. These participants completed measures of prior knowledge and interest, then read either an expository or persuasive text while thinking aloud. They then completed a passage recall and open-ended response following passage completion. In general, quantity was not positively related to the study outcomes and was negatively related to one of them. Quality of strategy use, on the other hand, was consistently related to positive reading outcomes. The influence of knowledge and interest in terms of strategies is also discussed as well as six cases which illustrate the relation of aspects of strategy use and the other concomitant variables. Evaluating strategy use by solely examining the frequency of strategy use did not explain differences in task performance as well as evaluating the quality and conjunctive use of strategies. Further, important relations between prior knowledge, interest, and the task outcomes appeared to be mediated and moderated by the aspects of strategy use investigated. © 2017 The British Psychological Society.

Photovoltaic Impact Assessment of Smart Inverter Volt-VAR Control on Distribution System Conservation Voltage Reduction and Power Quality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ding, Fei; Nagarajan, Adarsh; Chakraborty, Sudipta

This report presents an impact assessment study of distributed photovoltaic (PV) with smart inverter Volt-VAR control on conservation voltage reduction (CVR) energy savings and distribution system power quality. CVR is a methodology of flattening and lowering a distribution system voltage profile in order to conserve energy. Traditional CVR relies on operating utility voltage regulators and switched capacitors. However, with the increased penetration of distributed PV systems, smart inverters provide the new opportunity to control local voltage and power factor by regulating the reactive power output, leading to a potential increase in CVR energy savings. This report proposes a methodology tomore » implement CVR scheme by operating voltage regulators, capacitors, and autonomous smart inverter Volt-VAR control in order to achieve increased CVR benefit. Power quality is an important consideration when operating a distribution system, especially when implementing CVR. It is easy to measure the individual components that make up power quality, but a comprehensive method to incorporate all of these values into a single score has yet to be undertaken. As a result, this report proposes a power quality scoring mechanism to measure the relative power quality of distribution systems using a single number, which is aptly named the 'power quality score' (PQS). Both the CVR and PQS methodologies were applied to two distribution system models, one obtained from the Hawaiian Electric Company (HECO) and another obtained from Pacific Gas and Electric (PG&E). These two models were converted to the OpenDSS platform using previous model conversion tools that were developed by NREL. Multiple scenarios including various PV penetration levels and smart inverter densities were simulated to analyze the impact of smart inverter Volt-VAR support on CVR energy savings and feeder power quality. In order to analyze the CVR benefit and PQS, an annual simulation was conducted for each scenario.« less

The PEACE project review of clinical instruments for hospice and palliative care.

PubMed

Hanson, Laura C; Scheunemann, Leslie P; Zimmerman, Sheryl; Rokoske, Franziska S; Schenck, Anna P

2010-10-01

Hospice and palliative care organizations are expanding their use of standardized instruments and other approaches to measure quality. We undertook a systematic review and evaluation of published patient-level instruments for potential application in hospice and palliative care clinical quality measurement. We searched prior reviews and computerized reference databases from 1990 through February 2007 for studies of instruments relevant to physical, psychological, social, cultural, spiritual, or ethical aspects of palliative care, or measuring prognosis, function or continuity of care. Publications were selected for full review if they provided evidence of psychometric properties or practical application of an instrument tested in or appropriate for a hospice or palliative care population. Selected instruments were evaluated and scored for scientific soundness and potential application in clinical quality measurement. The search found 1427 publications, with 229 selected for full manuscript review. Manuscripts provided information on 129 instruments which were evaluated using a structured scoring guide for psychometric properties. Thirty-nine instruments scoring near or above the 75th percentile were recommended. Most instruments covered multiple domains or focused on care for physical symptoms, psychological or social aspects of care. Few instruments were available to measure cultural aspects of care, structure and process of care, and continuity of care. Numerous patient-level instruments are available to measure physical, psychological and social aspects of palliative care with adequate evidence for scientific soundness and practical clinical use for quality improvement and research. Other aspects of palliative care may benefit from further instrument development research.

Looking Through a Social Lens: Conceptualising Social Aspects of Knowledge Management for Global Health Practitioners

PubMed Central

Limaye, Rupali J.; Sullivan, Tara M.; Dalessandro, Scott; Jenkins, Ann Hendrix

2017-01-01

Knowledge management plays a critical role in global health. Global health practitioners require knowledge in every aspect of their jobs, and in resource-scarce contexts, practitioners must be able to rely on a knowledge management system to access the latest research and practice to ensure the highest quality of care. However, we suggest that there is a gap in the way knowledge management is primarily utilized in global health, namely, the systematic incorporation of human and social factors. In this paper, we briefly outline the evolution of knowledge management and then propose a conceptualization of knowledge management that incorporates human and social factors for use within a global health context. Our conceptualization of social knowledge management recognizes the importance of social capital, social learning, social software and platforms, and social networks, all within the context of a larger social system and driven by social benefit. We then outline the limitations and discuss future directions of our conceptualization, and suggest how this new conceptualization is essential for any global health practitioner in the business of managing knowledge. Significance for public health Managing knowledge is essential for improving population health outcomes. Global health practitioners at all levels of the health system are bombarded with information related to best practices and guideline changes, among other relevant information to provide the best quality of care. Knowledge management, or the act of effectively using knowledge, has yet to capitalize on the power of social connections within the context of global health. While social elements have been incorporated into knowledge management activities, we suggest that systematically integrating key concepts that leverage social connections, such as social systems, social capital, social learning, and social software, will yield greater benefit with regard to health outcomes. As such, we outline a new conceptualization of knowledge management, focusing on the social aspects of the practice, and posit that such an approach can further the impact of global health interventions and is crucial for global health practitioners. PMID:28480173

Space Station 20-kHz power management and distribution system

NASA Technical Reports Server (NTRS)

Hansen, Irving G.; Sundberg, Gale R.

1986-01-01

During the conceptual design phase a 20-kHz power distribution system was selected as the reference for the Space Station. The system is single-phase 400 VRMS, with a sinusoidal wave form. The initial user power level will be 75 kW with growth to 300 kW. The high-frequency system selection was based upon considerations of efficiency, weight, safety, ease of control, interface with computers, and ease of paralleling for growth. Each of these aspects will be discussed as well as the associated trade-offs involved. An advanced development program has been instituted to accelerate the maturation of the high-frequency system. Some technical aspects of the advanced development will be discussed.

Space station 20-kHz power management and distribution system

NASA Technical Reports Server (NTRS)

Hansen, I. G.; Sundberg, G. R.

1986-01-01

During the conceptual design phase a 20-kHz power distribution system was selected as the reference for the space station. The system is single-phase 400 VRMS, with a sinusoidal wave form. The initial user power level will be 75 kW with growth to 300 kW. The high-frequency system selection was based upon considerations of efficiency, weight, safety, ease of control, interface with computers, and ease of paralleling for growth. Each of these aspects will be discussed as well as the associated trade-offs involved. An advanced development program has been instituted to accelerate the maturation of the high-frequency system. Some technical aspects of the advanced development will be discussed.

Contract management techniques for improving construction quality

DOT National Transportation Integrated Search

1997-07-01

Efforts to improve quality in highway construction embrace many aspects of the construction process. Quality goals include enhanced efficiency and productivity, optimal cost and delivery time, improved performance, and changes in attitude-promoting a...

Implementing Subduction Models in the New Mantle Convection Code Aspect

NASA Astrophysics Data System (ADS)

Arredondo, Katrina; Billen, Magali

2014-05-01

The geodynamic community has utilized various numerical modeling codes as scientific questions arise and computer processing power increases. Citcom, a widely used mantle convection code, has limitations and vulnerabilities such as temperature overshoots of hundreds or thousands degrees Kelvin (i.e., Kommu et al., 2013). Recently Aspect intended as a more powerful cousin, is in active development with additions such as Adaptable Mesh Refinement (AMR) and improved solvers (Kronbichler et al., 2012). The validity and ease of use of Aspect is important to its survival and role as a possible upgrade and replacement to Citcom. Development of publishable models illustrates the capacity of Aspect. We present work on the addition of non-linear solvers and stress-dependent rheology to Aspect. With a solid foundational knowledge of C++, these additions were easily added into Aspect and tested against CitcomS. Time-dependent subduction models akin to those in Billen and Hirth (2007) are built and compared in CitcomS and Aspect. Comparison with CitcomS assists in Aspect development and showcases its flexibility, usability and capabilities. References: Billen, M. I., and G. Hirth, 2007. Rheologic controls on slab dynamics. Geochemistry, Geophysics, Geosystems. Kommu, R., E. Heien, L. H. Kellogg, W. Bangerth, T. Heister, E. Studley, 2013. The Overshoot Phenomenon in Geodynamics Codes. American Geophysical Union Fall Meeting. M. Kronbichler, T. Heister, W. Bangerth, 2012, High Accuracy Mantle Convection Simulation through Modern Numerical Methods, Geophys. J. Int.

Opportunities for Wind Power In Low- and Mid-Quality Resource Regions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantz, Eric; Mai, Trieu; Heimiller, Donna

2016-05-25

In this presentation for American Wind Energy Association (AWEA) WINDPOWER 2016 conference, the authors discuss wind power today in low and mid-quality resource regions, the anticipated role of wind power in the future electric sector, market potential in low and mid-quality resource regions, and anticipated innovations to capture that market potential.

Coptidis rhizoma and its main bioactive components: recent advances in chemical investigation, quality evaluation and pharmacological activity.

PubMed

Meng, Fan-Cheng; Wu, Zheng-Feng; Yin, Zhi-Qi; Lin, Li-Gen; Wang, Ruibing; Zhang, Qing-Wen

2018-01-01

Coptidis rhizoma (CR) is the dried rhizome of Coptis chinensis Franch., C. deltoidea C. Y. Cheng et Hsiao or C. teeta Wall. (Ranunculaceae) and is commonly used in Traditional Chinese Medicine for the treatment of various diseases including bacillary dysentery, typhoid, tuberculosis, epidemic cerebrospinal meningitis, empyrosis, pertussis, and other illnesses. A literature survey was conducted via SciFinder, ScieneDirect, PubMed, Springer, and Wiley databases. A total of 139 selected references were classified on the basis of their research scopes, including chemical investigation, quality evaluation and pharmacological studies. Many types of secondary metabolites including alkaloids, lignans, phenylpropanoids, flavonoids, phenolic compounds, saccharides, and steroids have been isolated from CR. Among them, protoberberine-type alkaloids, such as berberine, palmatine, coptisine, epiberberine, jatrorrhizine, columamine, are the main components of CR. Quantitative determination of these alkaloids is a very important aspect in the quality evaluation of CR. In recent years, with the advances in isolation and detection technologies, many new instruments and methods have been developed for the quantitative and qualitative analysis of the main alkaloids from CR. The quality control of CR has provided safety for pharmacological applications. These quality evaluation methods are also frequently employed to screen the active components from CR. Various investigations have shown that CR and its main alkaloids exhibited many powerful pharmacological effects including anti-inflammatory, anti-cancer, anti-diabetic, neuroprotective, cardioprotective, hypoglycemic, anti-Alzheimer and hepatoprotective activities. This review summarizes the recent phytochemical investigations, quality evaluation methods, the biological studies focusing on CR as well as its main alkaloids.

Quality of physician communication about human papillomavirus vaccine: findings from a national survey.

PubMed

Gilkey, Melissa B; Malo, Teri L; Shah, Parth D; Hall, Megan E; Brewer, Noel T

2015-11-01

Improving the quality of physicians' recommendations for human papillomavirus (HPV) vaccination is critical to addressing low coverage. Thus, we sought to describe HPV vaccine communication practices among primary care physicians. Pediatricians and family physicians (n = 776) completed our national online survey in 2014. We assessed the quality of their HPV vaccine recommendations on strength of endorsement (i.e., saying the vaccine is important), timeliness (recommending it by ages 11-12), consistency (recommending it routinely vs. using a risk-based approach), and urgency (recommending same-day vaccination). A sizeable minority of physicians reported that they do not strongly endorse HPV vaccine (27%) or deliver timely recommendations for girls (26%) or boys (39%). Many physicians (59%) used a risk-based approach to recommending HPV vaccine, and only half (51%) usually recommended same-day vaccination. Overall recommendation quality was lower among physicians who were uncomfortable talking about HPV vaccine or who believed parents did not value it. Quality was higher among physicians who began discussions by saying the child was due for HPV vaccine versus giving information or eliciting questions. Many physicians in our national sample reported recommending HPV vaccine inconsistently, behind schedule, or without urgency. These practices likely contribute to under-immunization among adolescents, and may convey ambivalence to parents. As one of the first studies to assess multiple aspects of recommendation quality, these findings can inform the many state and national initiatives that aim to improve communication about HPV vaccine so as to address the persistent underuse of a powerful tool for cancer prevention. ©2015 American Association for Cancer Research.

Factors involved in nurses' responses to burnout: a grounded theory study

PubMed Central

Rafii, Forough; Oskouie, Fatemeh; Nikravesh, Mansoure

2004-01-01

Background Intense and long-standing problems in burn centers in Tehran have led nurses to burnout. This phenomenon has provoked serious responses and has put the nurses, patients and the organization under pressure. The challenge for managers and nurse executives is to understand the factors which would reduce or increase the nurses' responses to burnout and develop delivery systems that promote positive adaptation and facilitate quality care. This study, as a part of more extensive research, aims to explore and describe the nurses' perceptions of the factors affecting their responses to burnout. Methods Grounded theory was used as the method. Thirty- eight participants were recruited. Data were generated by unstructured interviews and 21 sessions of participant observations. Constant comparison was used for data analysis. Results Nurses' and patients' personal characteristics and social support influenced nurses' responses to burnout. Personal characteristics of the nurses and patients, especially when interacting, had a more powerful effect. They altered emotional, attitudinal, behavioral and organizational responses to burnout and determined the kind of caring behavior. Social support had a palliative effect and altered emotional responses and some aspects of attitudinal responses. Conclusions The powerful effect of positive personal characteristics and its sensitivity to long standing and intense organizational pressures suggests approaches to executing stress reduction programs and refreshing the nurses' morale by giving more importance to ethical aspects of caring. Moreover, regarding palliative effect of social support and its importance for the nurses' wellbeing, nurse executives are responsible for promoting a work environment that supports nurses and motivates them. PMID:15541180

Positive and Negative Aspects of Relationship Quality and Unprotected Sex among Young Women

ERIC Educational Resources Information Center

Brady, Sonya S.; Gruber, Sandra K.; Wolfson, Julian A.

2016-01-01

The aim of this study was to examine both positive and negative aspects of relationship quality in relation to condom use. Sexually active young women aged 14-18 years (n = 111; 34% non-white) were recruited from community clinics and schools in the Midwest USA and provided data via an online survey. The number of unprotected sex acts in the past…

What patients' complaints and praise tell the health practitioner: implications for health care quality. A qualitative research study.

PubMed

Mattarozzi, Katia; Sfrisi, Fiamma; Caniglia, Filippo; De Palma, Alessandra; Martoni, Monica

2017-02-01

In order to identify which health care aspects play a role in patient satisfaction and quality of health care, the present study analyses a large number of instances of complaint and praise. One thousand two hundred and thirty-five instances of complaint and one thousand five hundred thirty-six of praise submitted from patients or other souces (i.e. a patient's family member or a legal representative) to a northern-Italian hospital were analysed. We adopted Reader and colleagues' (2014) patients' complaint taxonomy, in conjunction with a detailed content analysis of relationship and communication of information aspects. The most frequent causes of complaint concerned care system management (68.1%), particularly the time taken to access treatment, and relationship aspects (52.8%). The importance of relationship aspects was confirmed by the expression of gratitude through praise (89%). The most critical factor of the relationship domain was effective communication of information to the patient (39.3%). Frequently patients complained of: (i) having received information that was inconsistent with the truth, (ii) having had difficulty in obtaining information, and (iii) untimely communication of information. Clinical aspects did not seem to be the main factors that triggered a complaint (36,8%), and, when indicated, they were almost always associated with relationship issues. This study indicates that not only complaints, but also instances of praise, are a potentially important source of information regarding health care aspects that play a role in patient satisfaction and quality of care. Our findings underline the relevance of relationship aspects in determining patients' satisfaction with the care received. In particular, health practitioners should focus their attention on how information is understood, translated and applied by patients. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

The Relationship between Quality of Life with Marital Satisfaction in Nurses in Social Security Hospital in Zahedan

PubMed Central

Gharibi, Maliheh; Sanagouymoharer, Gholamreza; Yaghoubinia, Fariba

2016-01-01

Background: Marital satisfaction is one of the most important determinative factors of healthy function in family and can be affected by some factors. Aim: This study was conducted aimed to determine the relationship between quality of life and marital satisfaction in nurses in Social Security hospital in Zahedan. Method: In this descriptive and correlational study, the population was the all of the nurses in various wards in Social Security hospital in Zahedan. The sample size was 103 and data collection was done through quality of life questionnaire (War and Sherborn) and Enrich Marital Satisfaction Scale. Data analysis was done through SPSS15 and using pearsons’ correlation coefficient and stepwise regression. Results: The aspects of physical functioning, role limitations due to physical health problems, role limitation due to emotional problems had a significant positive correlation and the bodily pain had a significant reverse correlation with aspects of marital satisfaction. The aspects of role limitations due to physical health problems and bodily pain were predictors of marital satisfaction. Conclusion: The results of study demonstrated the importance of pay attention to family issues and marital satisfaction and in this regard, the promotion of all aspects of quality of life is essential. PMID:26383197

The History of the Development of the Rectenna. [solar power satellites

NASA Technical Reports Server (NTRS)

Brown, W. C.

1980-01-01

The history of the development of the rectenna is reviewed through its early conceptual developmental phases. Some selective aspects of the current solar power satellite rectenna development are examined.

Independent assessment of laser power beaming options

NASA Technical Reports Server (NTRS)

Ponikvar, Donald R.

1992-01-01

Technical and architectural issues facing a laser power beaming system are discussed. Issues regarding the laser device, optics, beam control, propagation, and lunar site are examined. Environmental and health physics aspects are considered.

Starting to Explore Wind Power

ERIC Educational Resources Information Center

Hare, Jonathan

2008-01-01

Described is a simple, cheap and versatile homemade windmill and electrical generator suitable for a school class to use to explore many aspects and practicalities of using wind to generate electrical power. (Contains 8 figures.)

QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES. Project Summary

EPA Science Inventory

It is generally agreed that both quality assurance (QA) and quality control (QC) are essential to the proper installation and eventual performance of environmentally safe and secure waste containment systems. Even further, there are both manufacturing and construction aspects to...

Striving for Power: Hemingway's Neurosis.

ERIC Educational Resources Information Center

Tavernier-Courbin, Jacqueline

1978-01-01

Analyzes the psychological aspects of Ernest Hemingway's inability to accept old age as symptomatic of his neurotic quest for power, which is seen in his drive to excel in pursuits which he thought important, and to take his life when he realized that he was past the peak of his powers. (MB)

Introducing Causality and Power into Family Therapy Theory: A Correction to the Systemic Paradigm.

ERIC Educational Resources Information Center

Fish, Vincent

1990-01-01

Proposes that concepts of causality and power are compatible with systemic paradigm based on cybernetics of Ashby rather than that of Bateson. Criticizes Bateson's repudiation of causality and power; addresses related Batesonian biases against "quantity" and "logic." Contrasts relevant aspects of Ashby's cybernetic theory with…

Advances in improvement of quality and resistance in a multipurpose crop: sea buckthorn.

PubMed

Ruan, Cheng-Jiang; Rumpunen, Kimmo; Nybom, Hilde

2013-06-01

Sea buckthorn is a berry crop with multiple uses. The berries are highly appreciated for their unique taste but are also very rich in bioactive compounds with powerful nutritional and medicinal values. In addition, the plants grow well under adverse conditions, and are often used to fight soil erosion. Utilization of sea buckthorn has therefore increased around the world but serious problems have, nevertheless, been encountered due to drought, salinity, diseases and insect pests. This review covers important aspects of sea buckthorn research, such as heritable and environmentally induced variation in biochemical compounds, causes and effects of the devastating dried-shrink disease, susceptibility to insect pests, methods for conventional breeding, and the utilization of DNA markers for taxonomical and population genetic analyses, and for investigating the inheritance of quality and resistance traits. We also present possibilities to implement innovative biotechnological breeding methods, especially metabolite profiling and MAS/GRC-based markers, for fast and efficient development of elite genotypes with specific nutritional- and health-related bioactive compounds and strong resistance to biotic and abiotic stress.

Experts stress both wellness and amenity aspects of food and nutrition services in assisted living facilities for older adults.

PubMed

Chao, Shirley Y; Dwyer, Johanna T; Houser, Robert F; Jacques, Paul; Tennstedt, Sharon

2008-10-01

There has been no consensus on best practices in food and nutrition services in assisted living facilities for older adults. We documented experts' views on optimal food and nutrition services emphases in assisted living facilities, and factors affecting their views. One hundred thirty-five national experts specializing in health, aging, nutrition and assisted living facilities completed a survey consisting four scenarios (ie, home-style, restaurant/hotel, and health/medical, and a combination of these three) in six food and nutrition services areas: dining room environment, meal services, meal quality, nutrition services, employees' qualifications, and therapeutic nutrition services. Sixty-three percent of experts favored the combination scenario. Dietetics education and experts' beliefs that assisted living facilities should be health promotion and maintenance facilities were significant predictors of emphases, including wellness considerations. Experts' personal views exerted a powerful influence. Experts chose food and nutrition service quality indicators that emphasized a focus on both wellness and amenities as their ideal scenarios for optimal food and nutrition services in assisted living facilities.

LC-MS based analysis of endogenous steroid hormones in human hair.

PubMed

Gao, Wei; Kirschbaum, Clemens; Grass, Juliane; Stalder, Tobias

2016-09-01

The quantification of endogenous steroid hormone concentrations in hair is increasingly used as a method for obtaining retrospective information on long-term integrated hormone exposure. Several different analytical procedures have been employed for hair steroid analysis, with liquid chromatography-mass spectrometry (LC-MS) being recognized as a particularly powerful analytical tool. Several methodological aspects affect the performance of LC-MS systems for hair steroid analysis, including sample preparation and pretreatment, steroid extraction, post-incubation purification, LC methodology, ionization techniques and MS specifications. Here, we critically review the differential value of such protocol variants for hair steroid hormones analysis, focusing on both analytical quality and practical feasibility issues. Our results show that, when methodological challenges are adequately addressed, LC-MS protocols can not only yield excellent sensitivity and specificity but are also characterized by relatively simple sample processing and short run times. This makes LC-MS based hair steroid protocols particularly suitable as a high-quality option for routine application in research contexts requiring the processing of larger numbers of samples. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrating MRP (materiel requirements planning) II and JIT to achieve world-class status.

PubMed

Titone, R C

1994-05-01

The concepts and principles of using manufacturing resource planning (MRP II) for planning are not new. Their success has been proven in numerous manufacturing companies in America. The concepts and principles of using just-in-time (JIT) inventory for execution, while more recent, have also been available for some time, and their success in Japan well documented. However, it is the effective integration of these two powerful tools that open the way to achieving world-class manufacturing status. This article will utilize a newly developed world-class manufacturing model, which will review the aspects of planning, beginning with a business plan through the production planning process and culminating with a master schedule that drives a materiel/capacity plan. The importance and interrelationship of these functions are reviewed. The model then illustrates the important aspects of executing these plans beginning with people issues, through total quality control (TQC) and pull systems. We will then utilize this new functional model to demonstrate the relationship between these various functions and the importance of integrating them with a total comprehensive manufacturing strategy that will lead to world-class manufacturing and profits.

Perception of quality of care among residents of public nursing-homes in Spain: a grounded theory study.

PubMed

Rodríguez-Martín, Beatriz; Martínez-Andrés, María; Cervera-Monteagudo, Beatriz; Notario-Pacheco, Blanca; Martínez-Vizcaíno, Vicente

2013-06-28

The quality of care in nursing homes is weakly defined, and has traditionally focused on quantify nursing homes outputs and on comparison of nursing homes' resources. Rarely the point of view of clients has been taken into account. The aim of this study was to ascertain what means "quality of care" for residents of nursing homes. Grounded theory was used to design and analyze a qualitative study based on in-depth interviews with a theoretical sampling including 20 persons aged over 65 years with no cognitive impairment and eight proxy informants of residents with cognitive impairment, institutionalized at a public nursing home in Spain. Our analysis revealed that participants perceived the quality of care in two ways, as aspects related to the persons providing care and as institutional aspects of the care's process. All participants agreed that aspects related to the persons providing care was a pillar of quality, something that, in turn, embodied a series of emotional and technical professional competences. Regarding the institutional aspects of the care's process, participants laid emphasis on round-the-clock access to health care services and on professional's job stability. This paper includes perspectives of the nursing homes residents, which are largely absent. Incorporating residents' standpoints as a complement to traditional institutional criteria would furnish health providers and funding agencies with key information when it came to designing action plans and interventions aimed at achieving excellence in health care.

[Qualitative Research in Health Services Research - Discussion Paper, Part 3: Quality of Qualitative Research].

PubMed

Stamer, M; Güthlin, C; Holmberg, C; Karbach, U; Patzelt, C; Meyer, T

2015-12-01

The third and final discussion paper of the German Network of Health Services Research's (DNVF) "Qualitative Methods Working Group" demonstrates methods for the evaluation and quality of qualitative research in health services research. In this paper we discuss approaches described in evaluating qualitative studies, including: an orientation to the general principles of empirical research, an approach-specific course of action, as well as procedures based on the research-process and criteria-oriented approaches. Divided into general and specific aspects to be considered in a qualitative study quality evaluation, the central focus of the discussion paper undertakes an extensive examination of the process and criteria-oriented approaches. The general aspects include the participation of relevant groups in the research process as well as ethical aspects of the research and data protection issues. The more specific aspects in evaluating the quality of qualitative research include considerations about the research interest, research questions, and the selection of data collection methods and types of analyses. The formulated questions are intended to guide reviewers and researchers to evaluate and to develop qualitative research projects appropriately. The intention of this discussion paper is to ensure a transparent research culture, and to reflect on and discuss the methodological and research approach of qualitative studies in health services research. With this paper we aim to initiate a discussion on high quality evaluation of qualitative health services research. © Georg Thieme Verlag KG Stuttgart · New York.

Reliability of electromagnetic induction data in near surface application

NASA Astrophysics Data System (ADS)

Nüsch, A.; Werban, U.; Sauer, U.; Dietrich, P.

2012-12-01

Use of the Electromagnetic Induction method for measuring electrical conductivities is widespread in applied geosciences, since the method is easy to perform and influenced by soil parameters. The vast amount of different applications of EMI measurements for different spatial resolutions as well as for the derivation of different soil parameters necessitates a unified handling of EMI data. So the requirements to the method have been changed from a qualitative overview to a quantitative use of data. A quantitative treatment of the data however is limited by the available instruments, which were made only for qualitative use. Nevertheless the limitations of the method can be expanded by considering a few conditions. In this study, we introduce possibilities for enhancing the quality of EMI data with regards to large scale investigations. In a set of systematic investigations, we show which aspects have to be taken into account when using a commercially available instrument, related to long term stability, comparability and repeatability. In-depth knowledge of the instruments used concerning aspects such as their calibration procedure, long term stability, battery life and thermal behaviour is an essential pre-requisite before starting the measurement process. A further aspect highlighted is quality control during measurements and if necessary a subsequent data correction which is pre-requisite for a quantitative analysis of the data. Quality control during the measurement process is crucial. Before a measurement starts, it is recommended that a short term test is carried out on-site to check environmental noise. Signal to noise ratio is a decisive influencing factor of whether or not the method is applicable at the chosen field site. A measurement needs to be monitored according to possible drifts. This can be achieved with different accuracies and starting from a quality check, with the help of reference lines up to a quantitative control with reference points. Further global reference lines are necessary if measurements take place at the landscape scale. In some cases, it is possible to eliminate drifts that may occur by using a data correction based on binding lines. The suggested procedure can raise the explanatory power of the data enormously and artefacts caused by drifts or inadequate handling are minimized. This work was supported by iSOIL - Interactions between soil related sciences - Linking geophysics, soil science and digital soil mapping, which is a Collaborative Project (Grant Agreement number 211386) co-funded by the Research DG of the European Commission within the RTD activities of the FP7 Thematic Priority Environment; iSOIL is one member of the SOIL TECHNOLOGY CLUSTER of Research Projects funded by the EC.

Evaluation and modeling of the potential effects of a module manufacturing anomaly

DOE PAGES

Kempe, Michael D.; Jordan, Dirk C.

2017-07-13

Photovoltaic lifetime predictions are in great demand, but are exceedingly difficult to achieve with uncertainties small enough to be useful. During the construction of photovoltaic modules, small unplanned variability in materials or processes can have profound effects on module durability. Thus, continual monitoring of production quality is needed. In the subject production run, module quality, as monitored by damp heat testing, revealed a subset of modules that were prone to higher degradation rates. An assessment of the potential long-term power loss and mitigation strategies was needed. To do this, modules were exposed to variable levels of humidity and temperature withmore » periodic monitoring. The analysis takes into account the kinetics of the degradation and the spatially and temporally varying humidity content within the module during accelerated stress testing. This is an important aspect for extrapolating laboratory results to field exposure because moisture ingress is diffusion limited in most laboratory module tests but not limited in these fielded modules. This analysis predicted that although a solder flux induce degradation mechanism is significant in accelerated stress test, this is probably an artifact of a process with a very large acceleration factor that is not likely to be significant for deployed modules. The degradation mechanism affected a limited area around the tabbing helping to minimize the effect. Furthermore, three years after the system was commissioned, the fielded modules indeed show no significant power loss.« less

Evaluation and modeling of the potential effects of a module manufacturing anomaly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kempe, Michael D.; Jordan, Dirk C.

Photovoltaic lifetime predictions are in great demand, but are exceedingly difficult to achieve with uncertainties small enough to be useful. During the construction of photovoltaic modules, small unplanned variability in materials or processes can have profound effects on module durability. Thus, continual monitoring of production quality is needed. In the subject production run, module quality, as monitored by damp heat testing, revealed a subset of modules that were prone to higher degradation rates. An assessment of the potential long-term power loss and mitigation strategies was needed. To do this, modules were exposed to variable levels of humidity and temperature withmore » periodic monitoring. The analysis takes into account the kinetics of the degradation and the spatially and temporally varying humidity content within the module during accelerated stress testing. This is an important aspect for extrapolating laboratory results to field exposure because moisture ingress is diffusion limited in most laboratory module tests but not limited in these fielded modules. This analysis predicted that although a solder flux induce degradation mechanism is significant in accelerated stress test, this is probably an artifact of a process with a very large acceleration factor that is not likely to be significant for deployed modules. The degradation mechanism affected a limited area around the tabbing helping to minimize the effect. Furthermore, three years after the system was commissioned, the fielded modules indeed show no significant power loss.« less

Quality Assurance of Chemical Measurements.

ERIC Educational Resources Information Center

Taylor, John K.

1981-01-01

Reviews aspects of quality control (methods to control errors) and quality assessment (verification that systems are operating within acceptable limits) including an analytical measurement system, quality control by inspection, control charts, systematic errors, and use of SRMs, materials for which properties are certified by the National Bureau…

42 CFR 493.1445 - Standard; Laboratory director responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... quality laboratory services for all aspects of test performance, which includes the preanalytic, analytic... result is found to be unacceptable or unsatisfactory; (5) Ensure that the quality control and quality assessment programs are established and maintained to assure the quality of laboratory services provided and...

High power broadband all fiber super-fluorescent source with linear polarization and near diffraction-limited beam quality.

PubMed

Ma, Pengfei; Huang, Long; Wang, Xiaolin; Zhou, Pu; Liu, Zejin

2016-01-25

In this manuscript, a high power broadband superfluorescent source (SFS) with linear polarization and near-diffraction-limited beam quality is achieved based on an ytterbium-doped (Yb-doped), all fiberized and polarization-maintained master oscillator power amplifier (MOPA) configuration. The MOPA structure generates a linearly polarized output power of 1427 W with a slope efficiency of 80% and a full width at half maximum (FWHM) of 11 nm, which is power scaled by an order of magnitude compared with the previously reported SFSs with linear polarization. In the experiment, both the polarization extinction ratio (PER) and beam quality (M(2) factor) are degraded little during the power scaling process. At maximal output power, the PER and M(2) factor are measured to be 19.1dB and 1.14, respectively. The root-mean-square (RMS) and peak-vale (PV) values of the power fluctuation at maximal output power are just 0.48% and within 3%, respectively. Further power scaling of the whole system is limited by the available pump sources. To the best of our knowledge, this is the first demonstration of kilowatt level broadband SFS with linear polarization and near-diffraction-limited beam quality.

Communicating data quality through Web Map Services

NASA Astrophysics Data System (ADS)

Blower, Jon; Roberts, Charles; Griffiths, Guy; Lewis, Jane; Yang, Kevin

2013-04-01

The sharing and visualization of environmental data through spatial data infrastructures is becoming increasingly common. However, information about the quality of data is frequently unavailable or presented in an inconsistent fashion. ("Data quality" is a phrase with many possible meanings but here we define it as "fitness for purpose" - therefore different users have different notions of what constitutes a "high quality" dataset.) The GeoViQua project (www.geoviqua.org) is developing means for eliciting, formatting, discovering and visualizing quality information using ISO and Open Geospatial Consortium (OGC) standards. Here we describe one aspect of the innovations of the GeoViQua project. In this presentation, we shall demonstrate new developments in using Web Map Services to communicate data quality at the level of datasets, variables and individual samples. We shall outline a new draft set of conventions (known as "WMS-Q"), which describe a set of rules for using WMS to convey quality information (OGC draft Engineering Report 12-160). We shall demonstrate these conventions through new prototype software, based upon the widely-used ncWMS software, that applies these rules to enable the visualization of uncertainties in raster data such as satellite products and the results of numerical simulations. Many conceptual and practical issues have arisen from these experiments. How can source data be formatted so that a WMS implementation can detect the semantic links between variables (e.g. the links between a mean field and its variance)? The visualization of uncertainty can be a complex task - how can we provide users with the power and flexibility to choose an optimal strategy? How can we maintain compatibility (as far as possible) with existing WMS clients? We explore these questions with reference to existing standards and approaches, including UncertML, NetCDF-U and Styled Layer Descriptors.

A Load-Based Temperature Prediction Model for Anomaly Detection

NASA Astrophysics Data System (ADS)

Sobhani, Masoud

Electric load forecasting, as a basic requirement for the decision-making in power utilities, has been improved in various aspects in the past decades. Many factors may affect the accuracy of the load forecasts, such as data quality, goodness of the underlying model and load composition. Due to the strong correlation between the input variables (e.g., weather and calendar variables) and the load, the quality of input data plays a vital role in forecasting practices. Even if the forecasting model were able to capture most of the salient features of the load, a low quality input data may result in inaccurate forecasts. Most of the data cleansing efforts in the load forecasting literature have been devoted to the load data. Few studies focused on weather data cleansing for load forecasting. This research proposes an anomaly detection method for the temperature data. The method consists of two components: a load-based temperature prediction model and a detection technique. The effectiveness of the proposed method is demonstrated through two case studies: one based on the data from the Global Energy Forecasting Competition 2014, and the other based on the data published by ISO New England. The results show that by removing the detected observations from the original input data, the final load forecast accuracy is enhanced.

Transmasculine People's Voice Function: A Review of the Currently Available Evidence.

PubMed

Azul, David; Nygren, Ulrika; Södersten, Maria; Neuschaefer-Rube, Christiane

2017-03-01

This study aims to evaluate the currently available discursive and empirical data relating to those aspects of transmasculine people's vocal situations that are not primarily gender-related, to identify restrictions to voice function that have been observed in this population, and to make suggestions for future voice research and clinical practice. We conducted a comprehensive review of the voice literature. Publications were identified by searching six electronic databases and bibliographies of relevant articles. Twenty-two publications met inclusion criteria. Discourses and empirical data were analyzed for factors and practices that impact on voice function and for indications of voice function-related problems in transmasculine people. The quality of the evidence was appraised. The extent and quality of studies investigating transmasculine people's voice function was found to be limited. There was mixed evidence to suggest that transmasculine people might experience restrictions to a range of domains of voice function, including vocal power, vocal control/stability, glottal function, pitch range/variability, vocal endurance, and voice quality. More research into the different factors and practices affecting transmasculine people's voice function that takes account of a range of parameters of voice function and considers participants' self-evaluations is needed to establish how functional voice production can be best supported in this population. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Computer program for afterheat temperature distribution for mobile nuclear power plant

NASA Technical Reports Server (NTRS)

Parker, W. G.; Vanbibber, L. E.

1972-01-01

ESATA computer program was developed to analyze thermal safety aspects of post-impacted mobile nuclear power plants. Program is written in FORTRAN 4 and designed for IBM 7094/7044 direct coupled system.

Modelling voltage sag mitigation using dynamic voltage restorer and analyzing power quality issue

NASA Astrophysics Data System (ADS)

Ismail, Nor Laili; Hidzir, Hizrin Dayana Mohd; Thanakodi, Suresh; Nazar, Nazatul Shiema Moh; Ibrahim, Pungut; Ali, Che Ku Muhammad Sabri Che Ku

2018-02-01

Power quality problem which are arise due to a fault or a pulsed load can have caused an interruption of critical load. The modern power systems are becoming more sensitive to the quality of the power supplied by the utility company. Voltage sags and swells, flicker, interruptions, harmonic distortion and other distortion to the sinusoidal waveform are the examples of the power quality problems. The most affected due to these problems is industrial customers who use a lot of sensitive equipment. There has suffered a huge loss to these problems. Resulting of broken or damage equipment if voltage sag exceeds the sensitive threshold of the equipment. Thus, device such as Static Synchronous Compensator (STATCOM) and Dynamic Voltage Restorer (DVR) has been created to solve this problem among users. DVR is a custom power device that most effective and efficient. This paper intended to report the DVR operations during voltage sag compensation.

Towards a Quality Assessment Method for Learning Preference Profiles in Negotiation

NASA Astrophysics Data System (ADS)

Hindriks, Koen V.; Tykhonov, Dmytro

In automated negotiation, information gained about an opponent's preference profile by means of learning techniques may significantly improve an agent's negotiation performance. It therefore is useful to gain a better understanding of how various negotiation factors influence the quality of learning. The quality of learning techniques in negotiation are typically assessed indirectly by means of comparing the utility levels of agreed outcomes and other more global negotiation parameters. An evaluation of learning based on such general criteria, however, does not provide any insight into the influence of various aspects of negotiation on the quality of the learned model itself. The quality may depend on such aspects as the domain of negotiation, the structure of the preference profiles, the negotiation strategies used by the parties, and others. To gain a better understanding of the performance of proposed learning techniques in the context of negotiation and to be able to assess the potential to improve the performance of such techniques a more systematic assessment method is needed. In this paper we propose such a systematic method to analyse the quality of the information gained about opponent preferences by learning in single-instance negotiations. The method includes measures to assess the quality of a learned preference profile and proposes an experimental setup to analyse the influence of various negotiation aspects on the quality of learning. We apply the method to a Bayesian learning approach for learning an opponent's preference profile and discuss our findings.

ANALYTICAL EQUATIONS OF STORAGE RESERVOIR WATER QUALITY

EPA Science Inventory

Distribution system water quality protection is an integral aspect of public water supply management. Effective regulatory compliance requires a thorough understanding of the transport and mixing processes in storage reservoirs and their impacts on effluent water quality. This ...

Quality Perception within Corporate E-Learning Providers in Catalonia

ERIC Educational Resources Information Center

Sangra, Albert; Fernandez-Michels, Pedro

2011-01-01

Purpose: The paper seeks to describe the Catalan corporate e-learning providers from the perspective of quality perception, quality assessment and quality control. Design/methodology/approach: A literature review reveals key aspects of the definition of quality in e-learning. The results of the review constitute the basis for exploratory research…

Indicators of the quality of general practice care of patients with chronic illness: a step towards the real involvement of patients in the assessment of the quality of care.

PubMed Central

Wensing, M; Grol, R; van Montfort, P; Smits, A

1996-01-01

OBJECTIVE--To develop a list of indicators of the general practice care of people with chronic illnesses considered important by both patients and practitioners and to identify the indicators that are considered relevant for patient assessment of health care quality. DESIGN--Qualitative study with focus group interviews and a written consensus procedure. SETTING--General practice in the Netherlands in 1993. SUBJECTS--34 patients with chronic illness, mostly members of patient organisations, and 19 general practitioners with expertise in either chronic disease management or experience with patient surveys. MAIN MEASURES--Aspects of general practice care considered important for the delivery of good quality care that emerged from focus group interviews; the relevance of evaluations of 41 aspects of care for patients explored through the written consensus procedure. Those aspects of general practice care agreed to be both important and relevant by patients and general practitioners were considered to be suitable indicators for patient assessment of the quality of care. RESULTS--Patients and general practitioners differed to some extent in their assessment of the aspects of care that they considered important for quality. They agreed that most indicators of care that related to the ¿doctor-patient relation¿ and to ¿information and support¿ were relevant and therefore suitable as indicators for patient assessment of health care quality. There was less agreement about the relevance of indicators of ¿medical and technical care,¿ ¿availability and accessibility,¿ and ¿organisation of services.¿ CONCLUSIONS--Several indicators of the quality of general practice care of patients with chronic illness were thought to be suitable for the patient assessment of healthcare quality, but other indicators were not, mainly because of reservations by general practitioners. IMPLICATIONS-- Qualitative methods can contribute to the selection of indicators for assessment of the quality of health care in areas where scientific evidence is limited or where patients' and providers' preferences are particularly important. PMID:10158595

Analytical Analysis and Case Study of Transient Behavior of Inrush Current in Power Transformer for Designing of Efficient Circuit Breakers

NASA Astrophysics Data System (ADS)

Harmanpreet, Singh, Sukhwinder; Kumar, Ashok; Kaur, Parneet

2010-11-01

Stability & security are main aspects in electrical power systems. Transformer protection is major issue of concern to system operation. There are many mall-trip cases of transformer protection are caused by inrush current problems. The phenomenon of transformer inrush current has been discussed in many papers since 1958. In this paper analytical analysis of inrush current in a transformer switched on dc and ac supply has been done. This analysis will help in design aspects of circuit breakers for better performance.

ALARA at nuclear power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baum, J.W.

1990-01-01

Implementation of the As Low As Reasonably Achievable (ALARA) principle at nuclear power plants presents a continuing challenge for health physicists at utility corporate and plant levels, for plant designers, and for regulatory agencies. The relatively large collective doses at some plants are being addressed though a variety of dose reduction techniques. It is planned that this report will include material on historical aspects, management, valuation of dose reduction, quantitative and qualitative aspects of optimization, design, operational considerations, and training. The status of this work is summarized in this report. 30 refs., 1 fig., 6 tabs.

A minimally invasive blood-extraction system: elastic self-recovery actuator integrated with an ultrahigh- aspect-ratio microneedle.

PubMed

Li, Cheng Guo; Lee, Kwang; Lee, Chang Yeol; Dangol, Manita; Jung, Hyungil

2012-08-28

A minimally invasive blood-extraction system is fabricated by the integration of an elastic self-recovery actuator and an ultrahigh-aspect-ratio microneedle. The simple elastic self-recovery actuator converts finger force to elastic energy to provide power for blood extraction and transport without requiring an external source of power. This device has potential utility in the biomedical field within the framework of complete micro-electromechanical systems. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Space nuclear power system and the design of the nuclear electric propulsion OTV

NASA Technical Reports Server (NTRS)

Buden, D.; Garrison, P. W.

1984-01-01

Payload increases of three to five times that of the Shuttle/Centaur can be achieved using nuclear electric propulsion. Various nuclear power plant options being pursued by the SP-100 Program are described. These concepts can grow from 100 kWe to 1 MWe output. Spacecraft design aspects are addressed, including thermal interactions, plume interactions, and radiation fluences. A baseline configuration is described accounting for these issues. Safety aspects of starting the OTV transfer from an altitude of 300 km indicate no significant additional risk to the biosphere.

An Improved Power Quality Based Sheppard-Taylor Converter Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2015-12-01

This paper deals with the design and analysis of a power factor correction based Sheppard-Taylor converter fed brushless dc motor (BLDCM) drive. The speed of the BLDCM is controlled by adjusting the dc link voltage of the voltage source inverter (VSI) feeding BLDCM. Moreover, a low frequency switching of the VSI is used for electronically commutating the BLDCM for reduced switching losses. The Sheppard-Taylor converter is designed to operate in continuous conduction mode to achieve an improved power quality at the ac mains for a wide range of speed control and supply voltage variation. The BLDCM drive is designed and its performance is simulated in a MATLAB/Simulink environment to achieve the power quality indices within the limits of the international power quality standard IEC-61000-3-2.

Technical Guidance from the International Safety Framework for Nuclear Power Source Applications in Outer Space for Design and Development Phases

NASA Astrophysics Data System (ADS)

Summerer, Leopold

2014-08-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space [1] has been adopted, following a multi-year process that involved all major space faring nations in the frame of the International Atomic Energy Agency and the UN Committee on the Peaceful Uses of Outer Space. The safety framework reflects an international consensus on best practices. After the older 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second document at UN level dedicated entirely to space nuclear power sources.This paper analyses aspects of the safety framework relevant for the design and development phases of space nuclear power sources. While early publications have started analysing the legal aspects of the safety framework, its technical guidance has not yet been subject to scholarly articles. The present paper therefore focuses on the technical guidance provided in the safety framework, in an attempt to assist engineers and practitioners to benefit from these.

Toward Machine Understanding of Information Quality.

ERIC Educational Resources Information Center

Tang, Rong; Ng, K. B.; Strzalkowski, Tomek; Kantor, Paul B.

2003-01-01

Reports preliminary results of a study to develop and automate new metrics for assessment of information quality in text documents, particularly in news. Through focus group studies, quality judgment experiments, and textual feature extraction and analysis, nine quality aspects were generated and applied in human assessments. Experiments were…

Evaluation Of Different Power Conditioning Options For Stirling Generators

NASA Astrophysics Data System (ADS)

Garrigos, A.; Blanes, J. M.; Carrasco, J. A.; Maset, E.; Montalban, G.; Ejea, J.; Ferreres, A.; Sanchis, E.

2011-10-01

Free-piston Stirling engines are an interesting alternative for electrical power systems, especially in deep space missions where photovoltaic systems are not feasible. This kind of power generators contains two main parts, the Stirling machine and the linear alternator that converts the mechanical energy from the piston movement to electrical energy. Since the generated power is in AC form, several aspects should be assessed to use such kind of generators in a spacecraft power system: AC/DC topologies, power factor correction, power regulation techniques, integration into the power system, etc. This paper details power generator operation and explores different power conversion approaches.

Lead/acid batteries in systems to improve power quality

NASA Astrophysics Data System (ADS)

Taylor, P.; Butler, P.; Nerbun, W.

Increasing dependence on computer technology is driving needs for extremely high-quality power to prevent loss of information, material, and workers' time that represent billions of dollars annually. This cost has motivated commercial and Federal research and development of energy storage systems that detect and respond to power-quality failures in milliseconds. Electrochemical batteries are among the storage media under investigation for these systems. Battery energy storage systems that employ either flooded lead/acid or valve-regulated lead/acid battery technologies are becoming commercially available to capture a share of this emerging market. Cooperative research and development between the US Department of Energy and private industry have led to installations of lead/acid-based battery energy storage systems to improve power quality at utility and industrial sites and commercial development of fully integrated, modular battery energy storage system products for power quality. One such system by AC Battery Corporation, called the PQ2000, is installed at a test site at Pacific Gas and Electric Company (San Ramon, CA, USA) and at a customer site at Oglethorpe Power Corporation (Tucker, GA, USA). The PQ2000 employs off-the-shelf power electronics in an integrated methodology to control the factors that affect the performance and service life of production-model, low-maintenance, flooded lead/acid batteries. This system, and other members of this first generation of lead/acid-based energy storage systems, will need to compete vigorously for a share of an expanding, yet very aggressive, power quality market.

48 CFR 46.707 - Pricing aspects of fixed-price incentive contract warranties.

Code of Federal Regulations, 2010 CFR

2010-10-01

... FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Warranties 46.707 Pricing aspects of... the total final price. Contractor compliance with the warranty after the establishment of the total...

48 CFR 46.707 - Pricing aspects of fixed-price incentive contract warranties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Warranties 46.707 Pricing aspects of... the total final price. Contractor compliance with the warranty after the establishment of the total...

Measuring the food and built environments in urban centres: reliability and validity of the EURO-PREVOB Community Questionnaire.

PubMed

Pomerleau, J; Knai, C; Foster, C; Rutter, H; Darmon, N; Derflerova Brazdova, Z; Hadziomeragic, A F; Pekcan, G; Pudule, I; Robertson, A; Brunner, E; Suhrcke, M; Gabrijelcic Blenkus, M; Lhotska, L; Maiani, G; Mistura, L; Lobstein, T; Martin, B W; Elinder, L S; Logstrup, S; Racioppi, F; McKee, M

2013-03-01

The authors designed an instrument to measure objectively aspects of the built and food environments in urban areas, the EURO-PREVOB Community Questionnaire, within the EU-funded project 'Tackling the social and economic determinants of nutrition and physical activity for the prevention of obesity across Europe' (EURO-PREVOB). This paper describes its development, reliability, validity, feasibility and relevance to public health and obesity research. The Community Questionnaire is designed to measure key aspects of the food and built environments in urban areas of varying levels of affluence or deprivation, within different countries. The questionnaire assesses (1) the food environment and (2) the built environment. Pilot tests of the EURO-PREVOB Community Questionnaire were conducted in five to 10 purposively sampled urban areas of different socio-economic status in each of Ankara, Brno, Marseille, Riga, and Sarajevo. Inter-rater reliability was compared between two pairs of fieldworkers in each city centre using three methods: inter-observer agreement (IOA), kappa statistics, and intraclass correlation coefficients (ICCs). Data were collected successfully in all five cities. Overall reliability of the EURO-PREVOB Community Questionnaire was excellent (inter-observer agreement (IOA) > 0.87; intraclass correlation coefficients (ICC)s > 0.91 and kappa statistics > 0.7. However, assessment of certain aspects of the quality of the built environment yielded slightly lower IOA coefficients than the quantitative aspects. The EURO-PREVOB Community Questionnaire was found to be a reliable and practical observational tool for measuring differences in community-level data on environmental factors that can impact on dietary intake and physical activity. The next step is to evaluate its predictive power by collecting behavioural and anthropometric data relevant to obesity and its determinants. Copyright © 2013 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Wireless sensor for temperature and humidity measurement

NASA Astrophysics Data System (ADS)

Drumea, Andrei; Svasta, Paul

2010-11-01

Temperature and humidity sensors have a broad range of applications, from heating and ventilation of houses to controlled drying of fruits, vegetables or meat in food industry. Modern sensors are integrated devices, usually MEMS, factory-calibrated and with digital output of measured parameters. They can have power down modes for reduced energy consumption. Such an integrated device allows the implementation of a battery powered wireless sensor when coupled with a low power microcontroller and a radio subsystem. A radio sensor can work independently or together with others in a radio network. Presented paper focuses mainly on measurement and construction aspects of sensors for temperature and humidity designed and implemented by authors; network aspects (communication between two or more sensors) are not analyzed.

77 FR 14007 - Environmental Assessment for a Radiological Work and Storage Building at the Knolls Atomic Power...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

... Knolls Atomic Power Laboratory Kesselring Site AGENCY: Naval Nuclear Propulsion Program, Department of... Propulsion Program (NNPP) announces the availability of a Draft Environmental Assessment (EA) for... NNPP is responsible for all aspects of U.S. Navy nuclear power and propulsion, pursuant to 50 U.S.C...

The Constitutional Aspects of the War Powers Resolution of November 7, 1973.

DTIC Science & Technology

legislation is examined in light of the constitutional separation of powers between the legislative and executive branch of government and its impact on...the executive. This essay contains an examination of the historical constitutional cases and the constitutional convention discussions on the separation of powers to ’make war.’ (Author)

Biomass "Green" Power Vs. Coal "Traditional" Power: Who is the Largest Emitter in Humboldt County and How Should Regulations be Addressed?

NASA Astrophysics Data System (ADS)

Zurawski, A. M.

2016-12-01

The objective of this research is to study how emissions from a fossil fuel power plant compare to emissions from a biomass power plant, and how these results can be used to improve current air-quality regulations. Outdoor air quality transcends national and political boundaries. Air pollution monitoring is essential to maintaining quality of life for humans and ecosystems. Due to anthropogenic disturbances (primarily related to burning of fossil fuels), air- quality management has become a priority on a long list of environmental issues. Quantifying and monitoring the largest emitters of greenhouse gases and toxic pollutants is crucial to the creation and enforcement of appropriate environmental protection regulations. Emissions data were collected from January 2010 to January 2016 from sensors installed close to a biomass power plant, and sensors installed close to a fossil fuel and natural gas power plant, in Humboldt County, California. In Humboldt County, where air quality serves as a baseline of air pollution in the United States, data showed that the "green" biomass power plant emitted higher levels of particulate matter compared to the fossil fuel power plant. Additionally, the biomass power plant showed levels of CO2, NOx, and SO2 emissions that suggest its place as a "green" power source should be reconsidered. Our research suggests that regulations need to be reconsidered given the potential for high pollutant emissions from biomass plants.

Multi-Mission Power Analysis Tool (MMPAT) Version 3

NASA Technical Reports Server (NTRS)

Wood, Eric G.; Chang, George W.; Chen, Fannie C.

2012-01-01

The Multi-Mission Power Analysis Tool (MMPAT) simulates a spacecraft power subsystem including the power source (solar array and/or radioisotope thermoelectric generator), bus-voltage control, secondary battery (lithium-ion or nickel-hydrogen), thermostatic heaters, and power-consuming equipment. It handles multiple mission types including heliocentric orbiters, planetary orbiters, and surface operations. Being parametrically driven along with its user-programmable features can reduce or even eliminate any need for software modifications when configuring it for a particular spacecraft. It provides multiple levels of fidelity, thereby fulfilling the vast majority of a project s power simulation needs throughout the lifecycle. It can operate in a stand-alone mode with a graphical user interface, in batch mode, or as a library linked with other tools. This software can simulate all major aspects of a spacecraft power subsystem. It is parametrically driven to reduce or eliminate the need for a programmer. Added flexibility is provided through user-designed state models and table-driven parameters. MMPAT is designed to be used by a variety of users, such as power subsystem engineers for sizing power subsystem components; mission planners for adjusting mission scenarios using power profiles generated by the model; system engineers for performing system- level trade studies using the results of the model during the early design phases of a spacecraft; and operations personnel for high-fidelity modeling of the essential power aspect of the planning picture.

Patient Experience and Satisfaction with Inpatient Service: Development of Short Form Survey Instrument Measuring the Core Aspect of Inpatient Experience

PubMed Central

Wong, Eliza L. Y.; Coulter, Angela; Hewitson, Paul; Cheung, Annie W. L.; Yam, Carrie H. K.; Lui, Siu fai; Tam, Wilson W. S.; Yeoh, Eng-kiong

2015-01-01

Patient experience reflects quality of care from the patients’ perspective; therefore, patients’ experiences are important data in the evaluation of the quality of health services. The development of an abbreviated, reliable and valid instrument for measuring inpatients’ experience would reflect the key aspect of inpatient care from patients’ perspective as well as facilitate quality improvement by cultivating patient engagement and allow the trends in patient satisfaction and experience to be measured regularly. The study developed a short-form inpatient instrument and tested its ability to capture a core set of inpatients’ experiences. The Hong Kong Inpatient Experience Questionnaire (HKIEQ) was established in 2010; it is an adaptation of the General Inpatient Questionnaire of the Care Quality Commission created by the Picker Institute in United Kingdom. This study used a consensus conference and a cross-sectional validation survey to create and validate a short-form of the Hong Kong Inpatient Experience Questionnaire (SF-HKIEQ). The short-form, the SF-HKIEQ, consisted of 18 items derived from the HKIEQ. The 18 items mainly covered relational aspects of care under four dimensions of the patient’s journey: hospital staff, patient care and treatment, information on leaving the hospital, and overall impression. The SF-HKIEQ had a high degree of face validity, construct validity and internal reliability. The validated SF-HKIEQ reflects the relevant core aspects of inpatients’ experience in a hospital setting. It provides a quick reference tool for quality improvement purposes and a platform that allows both healthcare staff and patients to monitor the quality of hospital care over time. PMID:25860775

Sociodemographic aspects and quality of life of patients with sickle cell anemia

PubMed Central

dos Santos, Juliana Pereira; Gomes Neto, Mansueto

2013-01-01

Background Sickle cell anemia is a chronic inherited disease, widespread in the Brazilian population due to the high degree of miscegenation in the country. Despite the high prevalence, there are few studies describing the characteristics of patients and the impact of the disease on quality of life. Objective To describe the sociodemographic profile and the impact of the disease on the quality of life of sickle cell anemia patients. Methods Over 18-year-old patients with sickle cell anemia who attended meetings held by the Associação Baiana de Portadores de Doenças Falciformes, an association for sickle cell anemia patients in Bahia, were interviewed. Sociodemographic data were collected and the generic the Medical Outcomes 36-Item Short-Form Health Survey (SF-36) questionnaire, which is used to assess quality of life, was applied. The analysis of the descriptive statistics was performed using the Statistics Program for the Social Sciences software. Results Thirty-two mostly female (65.6%) patients were interviewed. The mean age was 31.9 ± 12.67 years, 50.0% considered themselves black, 68.8% did not work and 87.5% had per capita income below the poverty line (up to one and a half minimum wages). The SF-36 scores were: limitation by physical aspects 26.56, functional capacity 28.9, emotional aspects 30.20, social aspects, 50.0, pain 50.31, mental health 54.62, general health status 56.09 and vitality 56.71. This shows that the disease has a huge impact on the patients' quality of life. Conclusion The disease interferes in the working capacity of individuals, who mostly have low incomes and impaired access to healthcare services and significantly impacts on their quality of life. PMID:24106440

'On the street where you live': Neighbourhood deprivation and quality of life among community-dwelling older people in Edinburgh, Scotland.

PubMed

Mõttus, René; Gale, Catharine R; Starr, John M; Deary, Ian J

2012-05-01

It is well established that neighbourhood quality is related to various aspects of people's health and coping, especially in old age. There have also been a few reports on the links between self-reported neighbourhood quality and quality of life in older age. However, it is not clear which aspects of quality of life in particular are related to neighbourhood quality and whether these associations are independent of the roles of cognitive, socioeconomic or health status, or rating biases. Using a large sample of Scots from the Edinburgh area (N = 1091, of whom 548 were men) aged between 68 and 71 years, this study shows direct associations of objectively and comprehensively determined neighbourhood deprivation with self-perceived quality of life in physical and environmental domains, but not in psychological or social relationship domains. In a path model, these associations were independent of the roles of childhood cognitive ability and change in it to age 70, educational attainment, and occupational social class. The count of adverse health conditions (cardiovascular disease, stroke history, high blood pressure, diabetes, or arthritis) was associated with both quality of life and neighbourhood deprivation, and mediated the indirect links from neighbourhood deprivation to physical, psychological and environmental domains of quality of life. It is concluded that the neighbourhood in which older people live plays a role in one of the most important outcomes-how satisfied they are with various aspects of their life including physical functioning. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Way to Increased Airplane Engine Power

NASA Technical Reports Server (NTRS)

Vohrer, Eugen

1939-01-01

The purpose of this paper is to give an outline of the present state of development and point out the possibilities available for the further increase in the power/displacement ratio, the economy, and the reliability of the engine. Some of the aspects discussed are methods of increasing take-off power, the various methods of preparation of the fuel mixture and their effect on power, economy, and safety.

Power Experienced by Women as Described by Chief Academic Officers at Women's Colleges and Universities in the United States

ERIC Educational Resources Information Center

Dustrud, Stephanine A. Martin

2012-01-01

Power is embedded within all aspects of human experience and has been a fundamental constituent in social systems since the beginning of recorded history. Power exists in every organization and evolves as the culture of the organization exerts its influence. Organizational structures and systems dictate the elements of power, its use, and its…

Status and Trend of Automotive Power Packaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Zhenxian

2012-01-01

Comprehensive requirements in aspects of cost, reliability, efficiency, form factor, weight, and volume for power electronics modules in modern electric drive vehicles have driven the development of automotive power packaging technology intensively. Innovation in materials, interconnections, and processing techniques is leading to enormous improvements in power modules. In this paper, the technical development of and trends in power module packaging are evaluated by examining technical details with examples of industrial products. The issues and development directions for future automotive power module packaging are also discussed.

Design and development of compact pulsed power driver for electron beam experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deb, Pankaj; Sharma, S.K.; Adhikary, B.

2014-07-01

Pulsed electron beam generation requires high power pulses of fast rise, short duration pulse with flat top. With this objective we have designed a low cost compact pulsed power driver based on water dielectric transmission line. The paper describes the design aspects and construction of the pulse power driver and its experimental results. The pulsed power driver consist of a capacitor bank and its charging power supply, high voltage generator, high voltage switch and pulse compression system. (author)

Coal geology of the Paleocene-Eocene Calvert Bluff Formation (Wilcox Group) and the Eocene Manning Formation (Jackson Group) in east-central Texas; field trip guidebook for the Society for Organic Petrology, Twelfth Annual Meeting, The Woodlands, Texas, August 30, 1995

USGS Publications Warehouse

Warwick, Peter D.; Crowley, Sharon S.

1995-01-01

The Jackson and Wilcox Groups of eastern Texas (fig. 1) are the major lignite producing intervals in the Gulf Region. Within these groups, the major lignite-producing formations are the Paleocene-Eocene Calvert Bluff Formation (Wilcox) and the Eocene Manning Formation (Jackson). According to the Keystone Coal Industry Manual (Maclean Hunter Publishing Company, 1994), the Gulf Coast basin produces about 57 million short tons of lignite annually. The state of Texas ranks number 6 in coal production in the United States. Most of the lignite is used for electric power generation in mine-mouth power plant facilities. In recent years, particular interest has been given to lignite quality and the distribution and concentration of about a dozen trace elements that have been identified as potential hazardous air pollutants (HAPs) by the 1990 Clean Air Act Amendments. As pointed out by Oman and Finkelman (1994), Gulf Coast lignite deposits have elevated concentrations of many of the HAPs elements (Be, Cd, Co, Cr, Hg, Mn, Se, U) on a as-received gm/mmBtu basis when compared to other United States coal deposits used for fuel in thermo-electric power plants. Although regulations have not yet been established for acceptable emissions of the HAPs elements during coal burning, considerable research effort has been given to the characterization of these elements in coal feed stocks. The general purpose of the present field trip and of the accompanying collection of papers is to investigate how various aspects of east Texas lignite geology might collectively influence the quality of the lignite fuel. We hope that this collection of papers will help future researchers understand the complex, multifaceted interrelations of coal geology, petrology, palynology and coal quality, and that this introduction to the geology of the lignite deposits of east Texas might serve as a stimulus for new ideas to be applied to other coal basins in the U.S. and abroad.

The effect of thermal de-phasing on the beam quality of a high-power single-pass second harmonic generation

NASA Astrophysics Data System (ADS)

Sadat Hashemi, Somayeh; Ghavami Sabouri, Saeed; Khorsandi, Alireza

2018-04-01

We present a theoretical model in order to study the effect of a thermally loaded crystal on the quality of a second-harmonic (SH) beam generated in a high-power pumping regime. The model is provided based on using a particular structure of oven considered for MgO:PPsLT nonlinear crystal to compensate for the thermal de-phasing effect that as the pumping power reaches up to 50 W degrades the conversion efficiency and beam quality of the interacting beams. Hereupon, the quality of fundamental beam is involved in the modeling to investigate the final effect on the beam quality of generated SH beam. Beam quality evaluation is subsequently simulated using Hermite-Gaussian modal decomposition approach for a range of fundamental beam qualities varied from 1 to 3 and for different levels of input powers. To provide a meaningful comparison numerical simulation is correlated with real data deduced from a high-power SH generation (SHG) experimental device. It is found that when using the open-top oven scheme and fixing the fundamental M 2-factor at nearly 1, for a range of input powers changing from 15 to 30 W, the M 2-factor of SHG beam is degraded from 9% to 24%, respectively, confirming very good consistency with the reported experimental results.

[Personal satisfaction as a component of adult's quality of life in Medellin].

PubMed

Cardona, Doris; Agudelo, Héctor B

2007-01-01

Determining personal satisfaction as the main component of the quality of life of men and women aged 20 to 64 in Medellin during 2005. This was a cross/sectional descriptive population study. Its primary source of information consisted of two samples (659 men and 683 women) representing 523,705 and 651,704 people respectively, according to population expansion factors, selected via probabilistic complex sampling, stratified by socioeconomic level, clustering, city blocks, houses and people. The quality of life for adults in Medellin is mainly represented by personal and economic aspects, their housing's physical environment and social security. The aspects analysed in this study were evaluated above 75%; personal abilities and capability produced the greatest satisfaction, whilst the economic situation and social security produced least satisfaction. There were no significant differences according to gender regarding personal satisfaction concerning various aspects of life. This study's contribution to knowledge lies in making evident the need to integrate each person's subjectivity, opinions and individual perception of his/her own life, since these are the main components in evaluating an individual's quality of life.

High power far-infrared optical parametric oscillator with high beam quality

NASA Astrophysics Data System (ADS)

Qian, Chuan-Peng; Shen, Ying-Jie; Dai, Tong-Yu; Duan, Xiao-Ming; Yao, Bao-Quan

2016-11-01

A high power ZnGeP2 (ZGP) optical parametric oscillator (OPO) with good beam quality pumped by a Q-switched Ho:YAG laser was demonstrated. The maximum output power of the ZGP OPO with a four-mirror ring cavity was about 5.04 W around 8.1 μm with 83.9 W Ho incident pump power, corresponding to a slope efficiency of 9.2 %. The ZGP OPO produced 36.0 ns far-IR pulse laser in the 8.0-8.3 μm spectral regions. The beam quality was measured to be M2 1.6 at the highest output power.

Relation between self-organized criticality and grain aspect ratio in granular piles

NASA Astrophysics Data System (ADS)

Denisov, D. V.; Villanueva, Y. Y.; Lőrincz, K. A.; May, S.; Wijngaarden, R. J.

2012-05-01

We investigate experimentally whether self-organized criticality (SOC) occurs in granular piles composed of different grains, namely, rice, lentils, quinoa, and mung beans. These four grains were selected to have different aspect ratios, from oblong to oblate. As a function of aspect ratio, we determined the growth (β) and roughness (α) exponents, the avalanche fractal dimension (D), the avalanche size distribution exponent (τ), the critical angle (γ), and its fluctuation. At superficial inspection, three types of grains seem to have power-law-distributed avalanches with a well-defined τ. However, only rice is truly SOC if we take three criteria into account: a power-law-shaped avalanche size distribution, finite size scaling, and a universal scaling relation relating characteristic exponents. We study SOC as a spatiotemporal fractal; in particular, we study the spatial structure of criticality from local observation of the slope angle. From the fluctuation of the slope angle we conclude that greater fluctuation (and thus bigger avalanches) happen in piles consisting of grains with larger aspect ratio.

Managerialism and the Risky Business of Quality Assurance in Universities

ERIC Educational Resources Information Center

Davis, Annemarie

2017-01-01

Purpose: This paper aims to identify what is needed to enhance academic quality assurance in a university, with specific efforts to reduce the risks associated with ritualised quality assurance practices. Design/methodology/approach: The aspects to enhance academic quality assurance efforts in managerial universities are identified through a…

Quantifying the increasing sensitivity of power systems to climate variability

NASA Astrophysics Data System (ADS)

Bloomfield, H. C.; Brayshaw, D. J.; Shaffrey, L. C.; Coker, P. J.; Thornton, H. E.

2016-12-01

Large quantities of weather-dependent renewable energy generation are expected in power systems under climate change mitigation policies, yet little attention has been given to the impact of long term climate variability. By combining state-of-the-art multi-decadal meteorological records with a parsimonious representation of a power system, this study characterises the impact of year-to-year climate variability on multiple aspects of the power system of Great Britain (including coal, gas and nuclear generation), demonstrating why multi-decadal approaches are necessary. All aspects of the example system are impacted by inter-annual climate variability, with the impacts being most pronounced for baseload generation. The impacts of inter-annual climate variability increase in a 2025 wind-power scenario, with a 4-fold increase in the inter-annual range of operating hours for baseload such as nuclear. The impacts on peak load and peaking-plant are comparably small. Less than 10 years of power supply and demand data are shown to be insufficient for providing robust power system planning guidance. This suggests renewable integration studies—widely used in policy, investment and system design—should adopt a more robust approach to climate characterisation.

Comparing the importance of quality measurement themes in juvenile idiopathic inflammatory myositis between patients and families and healthcare professionals.

PubMed

Tory, Heather O; Carrasco, Ruy; Griffin, Thomas; Huber, Adam M; Kahn, Philip; Robinson, Angela Byun; Zurakowski, David; Kim, Susan

2018-04-19

A standardized set of quality measures for juvenile idiopathic inflammatory myopathies (JIIM) is not in use. Discordance has been shown between the importance ascribed to quality measures between patients and families and physicians. The objective of this study was to assess and compare the importance of various aspects of high quality care to patients with JIIM and their families with healthcare providers, to aid in future development of comprehensive quality measures. Surveys were developed by members of the Childhood Arthritis and Rheumatology Research Alliance (CARRA) Juvenile Dermatomyositis Workgroup through a consensus process and administered to patients and families through the CureJM Foundation and to healthcare professionals through CARRA. The survey asked respondents to rate the importance of 19 items related to aspects of high quality care, using a Likert scale. Patients and families gave generally higher scores for importance to most of the quality measurement themes compared with healthcare professionals, with ratings of 13 of the 19 measures reaching statistical significance (p < 0.05). Of particular importance, however, was consensus between the groups on the top five most important items: quality of life, timely diagnosis, access to rheumatology, normalization of functioning/strength, and ability for self care. Despite overall differences in the rating of importance of quality indicators between patients and families and healthcare professionals, the groups agreed on the most important aspects of care. Recognizing areas of particular importance to patients and families, and overlapping in importance with providers, will promote the development of standardized quality measures with the greatest potential for improving care and outcomes for children with JIIM.

Preschool Teachers' Understanding of Quality in Preschool: A Comparative Study in Three European Countries

ERIC Educational Resources Information Center

Brodin, J.; Hollerer, L.; Renblad, K.; Stancheva-Popkostadinova, V.

2015-01-01

The aim of this article is to highlight the concept "quality" with a special focus on preschool teachers' understanding and compare what preschool teachers in Austria, Bulgaria and Sweden regard as quality. Although quality is at high degree a subjective concept, some aspects are regarded decisive for good quality. A questionnaire was…

Future trends in electrical energy generation economics in the United States

NASA Technical Reports Server (NTRS)

Schmitt, R. W.; Fox, G. R.; Shah, R. P.; Stewart, P. J.; Vermilyea, D. A.

1977-01-01

Developments related to the economics of coal-fired systems in the U.S. are mainly considered. The historical background of the U.S. electric generation industry is examined and the U.S. electrical generation characteristics in the year 1975 are considered. It is pointed out that coal-fired power plants are presently the largest source of electrical energy generation in the U.S. Questions concerning the availability and quality of coal are investigated. Currently there are plans for converting some 50 large oil and gas-fired generating plants to coal, and it is expected that coal will be the fuel used in almost all fossil-fired base load additions to generating capacity. Aspects of advanced energy conversion from coal are discussed, taking into account the performance and economic potential of the energy conversion systems.

The Medical Education and Best Practice in Orthopedic Patient Care in Poland.

NASA Astrophysics Data System (ADS)

Rosiek, Anna; Leksowski, Krzysztof

2012-07-01

The leadership organization focuses on education, teamwork, customer relationship and developing strategy which help in building added value, in managing activities, time and quality. Everyday orthopedic experience shows that medical education is a mixture of: specific knowledge, skills and attitudes of people working together, and that creates effective teamwork in a hospital environment. Apart from the main reason of medical education, teaching about disease treatment and health problem solving, medical education should also concentrate on human factors and behavioral aspects of patient treatment in hospital.Assessment of an organization and medical education process by cultural and teamwork criteria, offers a powerful new way to think about performance at the frontlines of healthcare and in the future it could be gold standard for assessing the success of an organization, and standards in medical education, not only in orthopedics.

Effect of Hartha and Najibia power plants on water quality indices of Shatt Al-Arab River, south of Iraq

NASA Astrophysics Data System (ADS)

Al-Aboodi, Ali H.; Abbas, Sarmad A.; Ibrahim, Husham T.

2018-05-01

The main object of this research is to assess the water quality of Shatt Al-Arab River and its suitability for various purposes near power plants (Hartha and Najibia) through physical and chemical analysis [temperature, pH, EC, Cl-, Na+, K+, Ca+2, Mg+2, HCO3 -, NO3 -, SO 4 -2 , Fe+, total alkalinity, total hardness, biological oxygen demand (BOD5), NH4 +, and NO2 -] using water quality index (WQI), organic pollution index (OPI), sodium adsorption ratio (SAR), and percentage of sodium ion (Na%) during the dry season (August, 2016) and the wet season (January, 2017). WQI of Shatt Al-Arab falls under very poor quality during summer season, while it ranges from very poor quality to unsuitable for drinking purposes during winter season. There is a clear effect of power plants on water quality. Hartha and Najibia power plants contribute to the deterioration of water quality by increasing the percentage ratio of WQI near these plants by 13.22 and 9.69%, respectively, compared to the north sites of these plants during summer season. The percentage ratios of increased WQI near Hartha and Najibia power plants compared to the north sites of these plants are 17.93 and 15.92%, respectively, during winter season. Water quality of Shatt Al-Arab falls under a high level of organic pollution during the summer and winter seasons. There is a slight effect by the power plants on the OPI. Hartha and Najibia power plants contributed to the change of the OPI by 10% compared to the north site of Hartha power plant. According to the comparison between the SAR values which represent the suitability of water for serve irrigation purposes and SAR values of Shatt Al-Arab, all sites lie in the first class (excellent). According to Na+%, the type of surface water in the studied area lies in good class during winter season and permissible class during summer season.

Use of meteorological information in the risk analysis of a mixed wind farm and solar

NASA Astrophysics Data System (ADS)

Mengelkamp, H.-T.; Bendel, D.

2010-09-01

Use of meteorological information in the risk analysis of a mixed wind farm and solar power plant portfolio H.-T. Mengelkamp*,** , D. Bendel** *GKSS Research Center Geesthacht GmbH **anemos Gesellschaft für Umweltmeteorologie mbH The renewable energy industry has rapidly developed during the last two decades and so have the needs for high quality comprehensive meteorological services. It is, however, only recently that international financial institutions bundle wind farms and solar power plants and offer shares in these aggregate portfolios. The monetary value of a mixed wind farm and solar power plant portfolio is determined by legal and technical aspects, the expected annual energy production of each wind farm and solar power plant and the associated uncertainty of the energy yield estimation or the investment risk. Building an aggregate portfolio will reduce the overall uncertainty through diversification in contrast to the single wind farm/solar power plant energy yield uncertainty. This is similar to equity funds based on a variety of companies or products. Meteorological aspects contribute to the diversification in various ways. There is the uncertainty in the estimation of the expected long-term mean energy production of the wind and solar power plants. Different components of uncertainty have to be considered depending on whether the power plant is already in operation or in the planning phase. The uncertainty related to a wind farm in the planning phase comprises the methodology of the wind potential estimation and the uncertainty of the site specific wind turbine power curve as well as the uncertainty of the wind farm effect calculation. The uncertainty related to a solar power plant in the pre-operational phase comprises the uncertainty of the radiation data base and that of the performance curve. The long-term mean annual energy yield of operational wind farms and solar power plants is estimated on the basis of the actual energy production and it's relation to a climatologically stable long-term reference period. These components of uncertainty are of technical nature and based on subjective estimations rather than on a statistically sound data analysis. And then there is the temporal and spatial variability of the wind speed and radiation. Their influence on the overall risk is determined by the regional distribution of the power plants. These uncertainty components are calculated on the basis of wind speed observations and simulations and satellite derived radiation data. The respective volatility (temporal variability) is calculated from the site specific time series and the influence on the portfolio through regional correlation. For an exemplary portfolio comprising fourteen wind farms and eight solar power plants the annual mean energy production to be expected is calculated, the different components of uncertainty are estimated for each single wind farm and solar power plant and for the portfolio as a whole. The reduction in uncertainty (or risk) through bundling the wind farms and the solar power plants (the portfolio effect) is calculated by Markowitz' Modern Portfolio Theory. This theory is applied separately for the wind farm and the solar power plant bundle and for the combination of both. The combination of wind and photovoltaic assets clearly shows potential for a risk reduction. Even assets with a comparably low expected return can lead to a significant risk reduction depending on their individual characteristics.

Service quality from the perspective of myocardial infarction patients.

PubMed

Gholipour, Kamal; Tabrizi, Jafar Sadegh; Azimzadeh, Solmaz; Ghafari, Samad; Iezadi, Shabnam

2018-04-01

Service quality (SQ) generally refers to the nonclinical aspects of health services and primarily focuses on the relationship between the care provider and the customers, and the environment in which care services are delivered. The aim of this study was to assess the SQ provided for myocardial infarction (MI) from the patients' perspective. A cross-sectional study was conducted with 164 patients with MI at the Tabriz Shahid Madani cardiology clinic. Study participants were selected using convenience sampling. SQ was measured using a validated Comprehensive Quality Measurement in Healthcare SQ questionnaire. The reliability was confirmed based on Cronbach's alpha coefficient (α=0.81). SQ was calculated using the formula SQ=10- (importance × performance), based on the importance and performance of non-health-related aspects from the customers' perspective. Importance scores ranged from 1 to 10 and performance was scored between 0 and 1. Of 164 participants, about 75% were men and almost 44% were between 51 and 65 years of age. From the customers' perspective, the total SQ score was 6.80 (0-10 scale), and the individual scores for all SQ aspects were below an acceptable level. Confidentiality, dignity and continuity were given the highest scores, while availability of support groups had the lowest score. The study findings revealed an opportunity to improve SQ. Patient and provider participation in quality improvement activities could be an effective strategy to improve the aspects of health care quality that were most important to the customers and those with low scores, such as availability of support groups.

Perception of quality of care among residents of public nursing-homes in Spain: a grounded theory study

PubMed Central

2013-01-01

Background The quality of care in nursing homes is weakly defined, and has traditionally focused on quantify nursing homes outputs and on comparison of nursing homes’ resources. Rarely the point of view of clients has been taken into account. The aim of this study was to ascertain what means “quality of care” for residents of nursing homes. Methods Grounded theory was used to design and analyze a qualitative study based on in-depth interviews with a theoretical sampling including 20 persons aged over 65 years with no cognitive impairment and eight proxy informants of residents with cognitive impairment, institutionalized at a public nursing home in Spain. Results Our analysis revealed that participants perceived the quality of care in two ways, as aspects related to the persons providing care and as institutional aspects of the care’s process. All participants agreed that aspects related to the persons providing care was a pillar of quality, something that, in turn, embodied a series of emotional and technical professional competences. Regarding the institutional aspects of the care’s process, participants laid emphasis on round-the-clock access to health care services and on professional’s job stability. Conclusions This paper includes perspectives of the nursing homes residents, which are largely absent. Incorporating residents’ standpoints as a complement to traditional institutional criteria would furnish health providers and funding agencies with key information when it came to designing action plans and interventions aimed at achieving excellence in health care. PMID:23809066

Post-Colonialism Perspectives on Educational Competition

ERIC Educational Resources Information Center

Yeh, Chuan-Rong

2016-01-01

Educational competition has always been the puzzle issue of educational researches. In this article, I analyze several aspects of educational competition within the perspective of post-colonialism discourse. In the political aspect, Taiwanese education is linked with political power, to present the post-colonial spirit by continuing dynastic…

A Review of Distributed Control Techniques for Power Quality Improvement in Micro-grids

NASA Astrophysics Data System (ADS)

Zeeshan, Hafiz Muhammad Ali; Nisar, Fatima; Hassan, Ahmad

2017-05-01

Micro-grid is typically visualized as a small scale local power supply network dependent on distributed energy resources (DERs) that can operate simultaneously with grid as well as in standalone manner. The distributed generator of a micro-grid system is usually a converter-inverter type topology acting as a non-linear load, and injecting harmonics into the distribution feeder. Hence, the negative effects on power quality by the usage of distributed generation sources and components are clearly witnessed. In this paper, a review of distributed control approaches for power quality improvement is presented which encompasses harmonic compensation, loss mitigation and optimum power sharing in multi-source-load distributed power network. The decentralized subsystems for harmonic compensation and active-reactive power sharing accuracy have been analysed in detail. Results have been validated to be consistent with IEEE standards.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Touati, Said; Chennai, Salim; Souli, Aissa

The increased requirements on supervision, control, and performance in modern power systems make power quality monitoring a common practise for utilities. Large databases are created and automatic processing of the data is required for fast and effective use of the available information. Aim of the work presented in this paper is the development of tools for analysis of monitoring power quality data and in particular measurements of voltage and currents in various level of electrical power distribution. The study is extended to evaluate the reliability of the electrical system in nuclear plant. Power Quality is a measure of how wellmore » a system supports reliable operation of its loads. A power disturbance or event can involve voltage, current, or frequency. Power disturbances can originate in consumer power systems, consumer loads, or the utility. The effect of power quality problems is the loss power supply leading to severe damage to equipments. So, we try to track and improve system reliability. The assessment can be focused on the study of impact of short circuits on the system, harmonics distortion, power factor improvement and effects of transient disturbances on the Electrical System during motor starting and power system fault conditions. We focus also on the review of the Electrical System design against the Nuclear Directorate Safety Assessment principles, including those extended during the last Fukushima nuclear accident. The simplified configuration of the required system can be extended from this simple scheme. To achieve these studies, we have used a demo ETAP power station software for several simulations. (authors)« less

POWER AND AUTHORITY--EMERGING TRENDS AND ASPIRATIONS, PROCEEDINGS OF THE STANFORD-BERKELEY SEMINAR FOR JUNIOR COLLEGE PRESIDENTS (2D, BERKELEY, JUNE 19-21, 1964).

ERIC Educational Resources Information Center

MEDSKER, LELAND L.; TILLERY, HARRY DALE

FIVE PAPERS ARE REPRODUCED IN THIS REPORT. DR. DONALD D. JACKSON DISCUSSED THE CHANGING POWER STRUCTURE IN MODERN SOCIETIES, AS PREPARATION FOR THE EXAMINATION OF TRENDS RELEVANT TO CRUCIAL ASPECTS OF THE COLLEGE COMMUNITY. GORDON W. BLACKWELL DESCRIBED THE FORMAL POWER STRUCTURE, THE INFORMAL POWER STRUCTURE, AND AREAS OF TENSION IN STATE…

Review of PREPA Technical Requirements for Interconnecting Wind and Solar Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gevorgian, Vahan; Booth, Sarah

2013-11-01

The Puerto Rico Electric Power Authority developed the minimum technical requirements for interconnection of wind turbine generation and photovoltaic power plants. NREL has conducted a review of these requirements based on generic technical aspects and electrical characteristics of wind and photovoltaic power plants, and on existing requirements from other utilities (both U.S. and European).

Power/Knowledge for Educational Theory: Stephen Ball and the Reception of Foucault

ERIC Educational Resources Information Center

Wang, Chia-Ling

2011-01-01

This paper explores the significance of the concept of power/knowledge in educational theory. The argument proceeds in two main parts. In the first, I consider aspects of Stephen J. Ball's highly influential work in educational theory. I examine his reception of Foucault's concept of power/knowledge and suggest that there are problems in his…

21 CFR 26.19 - Information relating to quality aspects.

Code of Federal Regulations, 2010 CFR

2010-04-01

... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS, AND CERTAIN MEDICAL DEVICE PRODUCT EVALUATION REPORTS: UNITED STATES AND THE EUROPEAN...

Source Water Quality Monitoring

EPA Science Inventory

Presentation will provide background information on continuous source water monitoring using online toxicity monitors and cover various tools available. Conceptual and practical aspects of source water quality monitoring will be discussed.

Experimental simulation of air quality in street canyon under changes of building orientation and aspect ratio.

PubMed

Yassin, Mohamed F; Ohba, Masaake

2012-09-01

To assist validation of numerical simulations of urban pollution, air quality in a street canyon was investigated using a wind tunnel as a research tool under neutral atmospheric conditions. We used tracer gas techniques from a line source without buoyancy. Ethylene (C(2)H(4)) was used as the tracer gas. The street canyon model was formed of six parallel building rows of the same length. The flow and dispersion field was analyzed and measured using a hot-wire anemometer with split fiber probe and fast flame ionization detector. The diffusion flow field in the boundary layer within the street canyon was examined at different locations, with varying building orientations (θ=90°, 112.5°, 135° and 157.5°) and street canyon aspect ratios (W/H=1/2, 3/4 and 1) downwind of the leeward side of the street canyon model. Results show that velocity increases with aspect ratio, and with θ>90°. Pollutant concentration increases as aspect ratio decreases. This concentration decreases exponentially in the vertical direction, and decreases as θ increases from 90°. Measured pollutant concentration distributions indicate that variability of building orientation and aspect ratio in the street canyon are important for estimating air quality in the canyon. The data presented here can be used as a comprehensive database for validation of numerical models.

The effects of TGG crystal length on output power and beam quality of a unidirectional ring Nd:YVO4 laser with and without second harmonic generation

NASA Astrophysics Data System (ADS)

Ahmadi, A.; Avazpour, A.; Nadgaran, H.; Mousavi, M.

2018-04-01

The effect of terbium gallium garnet (TGG ) crystal length on 1064 and 532 nm output powers and beam quality of a unidirectional ring Nd:YVO4 laser is investigated. In the case of 1064 nm (without nonlinear crystal), the laser output power without considerating the effect of TGG crystal was computed theoretically. Then three TGG crystals with different lengths were placed in the laser setup one by one. A systematic decrease in output power was observed by increasing the TGG crystal length. The experiment was repeated in the case of 532 nm. It was found that in a 532 nm laser, higher laser efficiency and small beam quality degradation can be achieved by increasing the TGG crystal length leading to a 5.7 W green laser with 27 W pump power. The power stability and beam quality were 0.8% for 30 min and less than 1.3, respectively.

Fabrication of high aspect ratio nanopillars and micro/nano combined structures with hydrophobic surface characteristics by injection molding

NASA Astrophysics Data System (ADS)

Zhou, Mingyong; Xiong, Xiang; Jiang, Bingyan; Weng, Can

2018-01-01

Polymer products with micro/nano-structures have excellent mechanical and optical properties, chemical resistance, and other advantages. Injection molding is one of the most potential techniques to fabricate polymer products with micro/nano-structures artificially in large numbers. In this study, a surface approach to fabricate high aspect ratio nanopillars and micro/nano combined structures was presented. Mold insert with micropillar arrays and nanopillars on its surface was prepared by combing anodic aluminum oxide (AAO) template and etched plate. Anti-sticking modification was done on the template to realize a better demolding quality. The influences of mold temperature and polymer material on the final replication quality were investigated. The results showed that the final replication quality of high aspect ratio nanopillars was greatly improved as compared with the unprocessed template. Polymer with low elongation at break was not suitable to fabricate structures with high aspect ratio via injection molding. For polypropylene surface, the experimental results of static contact angles were almost consistent with Cassie-Baxter equation. When the mold temperature reached 178 °C, hair-like polycarbonate nanopillars were observed, resulting in an excellent hydrophobic characteristic.

Sleep quality and spiritual well-being in hemodialysis patients.

PubMed

Eslami, Ahmad Ali; Rabiei, Leili; Khayri, Freidoon; Rashidi Nooshabadi, Mohammad Reza; Masoudi, Reza

2014-07-01

Sleep disorders are considered as one of the most important problems in hemodialysis patients, making their everyday life a serious hazard. Sleep quality of hemodialysis patients and consequences of sleep disorders on other aspects of health such as spiritual well-being are important issues. This study examined the relationship between spiritual well-being and quality of sleep in hemodialysis patients in Isfahan, Iran. This study was a correlation research, carried out on 190 hemodialysis patients. Data collection Questionnaires included demographic forms, Pittsburgh sleep quality index (PSQI), and Ellison and Paloutzian spiritual well-being scale. Data were analyzed using descriptive and inferential statistics (Pearson correlation and linear regression analysis) at P < 0.05 significance level, by SPSS software version 18. Of 190 study participants, 163 (85.78%) with scores more than five index had sleep disturbances and 27 (14.12%) had no sleep disturbance; 3 (1.52%) had mild, 163 (85.78%) moderate, and 24 (12.30%) good spiritual health conditions. Pearson correlation test showed significant relationship between the sleep quality items of Pittsburg and spiritual well-being (P < 0.04, r = 0.149). Through the regression analyses of spiritual health, family, education, financial status, marital status, occupation, and use of sleep medication, the predictive power of these variables was found 0.417% and prediction of spiritual well-being was more than others (ß = 0.209). Considering bed as one of the most vital physical, mental, and emotional needs, it is very important in mental and spiritual well-being of hemodialysis patients as an influencing factor in mental relaxation and reducing disease tensions. Paying attention to sleep quality and spiritual well-being components of hemodialysis patients in formulating and promoting healthcare programs is recommended.

Medical information on the internet: a tool for measuring consumer perception of quality aspects.

PubMed

Dubowicz, Arthur; Schulz, Peter J

2015-03-30

Most of adult Internet users have searched for health information on the Internet. The Internet has become one of the most important sources for health information and treatment advice. In most cases, the information found is not verified with a medical doctor, but judged by the "online-diagnosers" independently. Facing this situation, public health authorities raise concern over the quality of medical information laypersons can find on the Internet. The objective of the study was aimed at developing a measure to evaluate the credibility of websites that offer medical advice and information. The measure was tested in a quasi-experimental study on two sleeping-disorder websites of different quality. There were 45 survey items for rating the credibility of websites that were tested in a quasi-experimental study with a random assignment of 454 participants to either a high- or a low-quality website exposure. Using principal component analysis, the original items were reduced to 13 and sorted into the factors: trustworthiness, textual deficits of the content, interferences (external links on the Web site), and advertisements. The first two factors focus more on the provided content itself, while the other two describe the embedding of the content into the website. The 45 survey items had been designed previously using exploratory observations and literature research. The final scale showed adequate power and reliability for all factors. The loadings of the principal component analysis ranged satisfactorily (.644 to .854). Significant differences at P<.001 were found between the low- and high-quality groups. Advertisements on the website were rated as disturbing in both experimental conditions, meaning that they do not differentiate between good and bad information. The scale reliably distinguished high- and low-quality of medical advice given on websites.

Multi-Channel, Constant-Current Power Source for Aircraft Applications

DTIC Science & Technology

2017-03-01

Special considerations impacting this design were minimizing volume, maintaining system power quality, and providing electrical fault protection...applications. Electrical loads, such as lighting, de-icing heaters, and actuators may be operated from this compact power conversion unit. Because of the...nature of aircraft systems, two of the most important design considerations are the maintenance of electrical power quality and minimization of weight

An assessment of The Effects of Elevation and Aspect on Deposition of Airborne Pollution and Water Quality in an Alpine Critical Zone: San Juan Mountains, Colorado, USA

NASA Astrophysics Data System (ADS)

Price, A.; Giardino, J. R.; Marcantonio, F.

2015-12-01

The alpine critical zone is affected by various inputs, storages, pathways, and outputs. Unfortunately, many of these processes distribute the pollutants beyond the immediate area and into the surrounding biological and anthropogenic communities. Years of mining and improper disposal of the tailings and acid-mine drainage have degraded the quality of surface water within the San Juan Mountains. However, mining may not be the only factor significantly affecting the surface water quality in this high-elevation environment. As a high elevation system, this area is a fragile ecosystem with inputs ranging from local mining to atmospheric transport and deposition. Studies from around the world have shown atmospheric transport and deposition affect high-elevation systems. Thus, a significant question arises: does elevation or aspect affect the volume and rate of atmospheric deposition of pollutants? We assume atmospheric deposition occurs on the slopes in addition to in streams, lakes, and ponds. Deposition on slopes can be transported to nearby surface waters and increase the impact of the atmospheric pollutants along with residence time. Atmospheric deposition data were collected for aluminum, iron, manganese, nitrate, phosphate, and sulfate. Water chemistry data were collected for the same constituents as the atmospheric deposition with the addition of temperature, dissolved oxygen, pH, and specific conductance. Deposition samples were collected on a five-day sampling regime during two summers. Water quality samples were collected in-stream adjacent to the deposition-ample collectors. Collection sites were located on opposite sides of Red Mountain at five equal elevations providing two different aspects. The north side is drained by Red Mountain Creek and the south side is drained by Mineral Creek. Differences in atmospheric deposition and water quality at different elevations and aspects suggest there is a relationship between aspect and elevation on atmospheric pollution deposition. It is suggested that degradation of water quality in the San Juan Mountains is affected by atmospheric deposition along with the damage sustained from local mining activities. These results facilitate a better understanding of this high-elevation critical-zone system.

Dutch healthcare reform: did it result in performance improvement of health plans? A comparison of consumer experiences over time.

PubMed

Hendriks, Michelle; Spreeuwenberg, Peter; Rademakers, Jany; Delnoij, Diana M J

2009-09-17

Many countries have introduced elements of managed competition in their healthcare system with the aim to accomplish more efficient and demand-driven health care. Simultaneously, generating and reporting of comparative healthcare information has become an important quality-improvement instrument. We examined whether the introduction of managed competition in the Dutch healthcare system along with public reporting of quality information was associated with performance improvement in health plans. Experiences of consumers with their health plan were measured in four consecutive years (2005-2008) using the CQI(R) health plan instrument 'Experiences with Healthcare and Health Insurer'. Data were available of 13,819 respondents (response = 45%) of 30 health plans in 2005, of 8,266 respondents (response = 39%) of 32 health plans in 2006, of 8,088 respondents (response = 34%) of 32 health plans in 2007, and of 7,183 respondents (response = 31%) of 32 health plans in 2008. We performed multilevel regression analyses with three levels: respondent, health plan and year of measurement. Per year and per quality aspect, we estimated health plan means while adjusting for consumers' age, education and self-reported health status. We tested for linear and quadratic time effects using chi-squares. The overall performance of health plans increased significantly from 2005 to 2008 on four quality aspects. For three other aspects, we found that the overall performance first declined and then increased from 2006 to 2008, but the performance in 2008 was not better than in 2005. The overall performance of health plans did not improve more often for quality aspects that were identified as important areas of improvement in the first year of measurement. On six out of seven aspects, the performance of health plans that scored below average in 2005 increased more than the performance of health plans that scored average and/or above average in that year. We found mixed results concerning the effects of managed competition on the performance of health plans. To determine whether managed competition in the healthcare system leads to quality improvement in health plans, it is important to examine whether and for what reasons health plans initiate improvement efforts.

Performance Evaluation of UPQC under Nonlinear Unbalanced Load Conditions Using Synchronous Reference Frame Based Control

NASA Astrophysics Data System (ADS)

Kota, Venkata Reddy; Vinnakoti, Sudheer

2017-12-01

Today, maintaining Power Quality (PQ) is very important in the growing competent world. With new equipments and devices, new challenges are also being put before power system operators. Unified Power Quality Conditioner (UPQC) is proposed to mitigate many power quality problems and to improve the performance of the power system. In this paper, an UPQC with Fuzzy Logic controller for capacitor voltage balancing is proposed in Synchronous Reference Frame (SRF) based control with Modified Phased Locked Loop (MPLL). The proposed controller with SRF-MPLL based control is tested under non-linear and unbalanced load conditions. The system is developed in Matlab/Simulink and its performance is analyzed under various conditions like non-linear, unbalanced load and polluted supply voltage including voltage sag/swells. Active and reactive power flow in the system, power factor and %THD of voltages and currents before and after compensation are also analyzed in this work. Results prove the applicability of the proposed scheme for power quality improvement. It is observed that the fuzzy controller gives better performance than PI controller with faster capacitor voltage balancing and also improves the dynamic performance of the system.

A Review Analysis of Inverter Topologies for Solar PV Applications Focused on Power Quality

NASA Astrophysics Data System (ADS)

Faruqui, Saad Nazif Ahamad; Anwer, Naqui

2017-10-01

This research article gives widespread review of non-isolated topologies for solar photovoltaic equipments. To relate with available elucidations of the said studied topological arrangement, some conditions have been imposed. The benchmark is based on harmonic distortion as well as power quality issues. Some of the selected solution have been designed and simulated for power quality issues. The best one has been discussed in the paper.

HOS network-based classification of power quality events via regression algorithms

NASA Astrophysics Data System (ADS)

Palomares Salas, José Carlos; González de la Rosa, Juan José; Sierra Fernández, José María; Pérez, Agustín Agüera

2015-12-01

This work compares seven regression algorithms implemented in artificial neural networks (ANNs) supported by 14 power-quality features, which are based in higher-order statistics. Combining time and frequency domain estimators to deal with non-stationary measurement sequences, the final goal of the system is the implementation in the future smart grid to guarantee compatibility between all equipment connected. The principal results are based in spectral kurtosis measurements, which easily adapt to the impulsive nature of the power quality events. These results verify that the proposed technique is capable of offering interesting results for power quality (PQ) disturbance classification. The best results are obtained using radial basis networks, generalized regression, and multilayer perceptron, mainly due to the non-linear nature of data.

Measuring Service Quality in a Tertiary Institution.

ERIC Educational Resources Information Center

Soutar, Geoffrey; McNeil, Margaret

1996-01-01

Measures service quality from the viewpoint of customers (students at an Australian university), using the SERVQUAL model. Obtains evaluations of academic and administrative aspects of the educational service. Makes significant negative evaluations of administrative service quality (resulting from communication problems). Satisfaction with the…

Blackberry fruit quality components, composition, and potential health benefits

USDA-ARS?s Scientific Manuscript database

Blackberries have long been a popular small fruit. Their chemical composition data was assembled for this invited book chapter. Briefly, primary and secondary metabolites important to blackberry fruit quality were summarized. Metabolites are involved in many critical aspects of fruit quality includi...

Influence of fundamental mode fill factor on disk laser output power and laser beam quality

NASA Astrophysics Data System (ADS)

Cheng, Zhiyong; Yang, Zhuo; Shao, Xichun; Li, Wei; Zhu, Mengzhen

2017-11-01

An three-dimensional numerical model based on finite element method and Fox-Li method with angular spectrum diffraction theoy is developed to calculate the output power and power density distribution of Yb:YAG disk laser. We invest the influence of fundamental mode fill factor(the ratio of fundamental mode size and pump spot size) on the output power and laser beam quality. Due to aspherical aberration and soft aperture effect in laser disk, high beam quality can be achieve with relative lower efficiency. The highest output power of fundamental laser mode is influenced by the fundamental mode fill factor. Besides we find that optimal mode fill factor increase with pump spot size.

Application of NIR hyperspectral imaging for post-consumer polyolefins recycling

NASA Astrophysics Data System (ADS)

Serranti, Silvia; Gargiulo, Aldo; Bonifazi, Giuseppe

2012-06-01

An efficient large-scale recycling approach of particulate solid wastes is always accomplished according to the quality of the materials fed to the recycling plant and/or to any possible continuous and reliable control of the different streams inside the processing plants. Processing technologies addressed to recover plastics need to be extremely powerful, since they must be relatively simple to be cost-effective, but also accurate enough to create high-purity products and able to valorize a substantial fraction of the plastic waste materials into useful products of consistent quality in order to be economical. On the other hand, the potential market for such technologies is large and the boost of environmental regulations, and the oil price increase, has made many industries interested both in "general purpose" waste sorting technologies, as well as in developing more specialized sensing devices and/or inspection logics for a better quality assessment of plastic products. In this perspective recycling strategies have to be developed taking into account some specific aspects as i) mixtures complexity: the valuable material has to be extracted from the residue, ii) overall production: the profitability of plastic can be achieved only with mass production and iii) costs: low-cost sorting processes are required. In this paper new analytical strategies, based on hyperspectral imaging in the near infrared field (1000-1700 nm), have been investigated and set up in order to define sorting and/or quality control logics that could be profitably applied, at industrial plant level, for polyolefins recycling.

Questions of Quality: in Europe and Beyond. Higher Education Report No. 1.

ERIC Educational Resources Information Center

Brennan, John; van Vught, Frans

These two papers look at international aspects of quality in higher education from contrasting perspectives. The first paper, "Higher Education Quality: A European Dimension" by John Brennan asks whether there is a distinctive European dimension to quality in higher education and, if so, what are its implications for British institutions…

Schools of Quality. Third Edition.

ERIC Educational Resources Information Center

Bonstingl, John Jay

This book presents the concept that quality as a keystone philosophy in today's business world can be applied to school systems as a means to improving education and all aspects of school culture, producing a school of quality. The author uses examples such as Japan's adopting William E. Deming's quality-control principles to help it skyrocket…

Annotated bibliography on forest practices legislation related to water quality

Treesearch

Neil K. Huyler; David McMath; Daphne Hewitt

1999-01-01

Includes annotated citations of literature on forest practices regulations related to all aspects of water quality protection. The bibliography is divided into three sections: 1) Water quality protection during timber harvesting; 2) Methods for assessing the costs and benefits of water quality protection; and 3) Effectiveness of regulatory programs in protecting water...

Analysis Supporting Factors and Constraints LPMP Performance in Improving the Quality of Education in Jambi Province

ERIC Educational Resources Information Center

Rosadi, Kemas Imron

2015-01-01

Development of education in Indonesia is based on three aspects, namely equity and expansion, quality and relevance, as well as good governance. Quality education is influenced by several factors related to quality education managerial leaders, limited funds, facilities, educational facilities, media, learning resources, tools and training…

Instruments to assess patients with rotator cuff pathology: a systematic review of measurement properties.

PubMed

Longo, Umile Giuseppe; Saris, Daniël; Poolman, Rudolf W; Berton, Alessandra; Denaro, Vincenzo

2012-10-01

The aims of this study were to obtain an overview of the methodological quality of studies on the measurement properties of rotator cuff questionnaires and to describe how well various aspects of the design and statistical analyses of studies on measurement properties are performed. A systematic review of published studies on the measurement properties of rotator cuff questionnaires was performed. Two investigators independently rated the quality of the studies using the Consensus-based Standards for the selection of health Measurement Instruments checklist. This checklist was developed in an international Delphi consensus study. Sixteen studies were included, in which two measurement instruments were evaluated, namely the Western Ontario Rotator Cuff Index and the Rotator Cuff Quality-of-Life Measure. The methodological quality of the included studies was adequate on some properties (construct validity, reliability, responsiveness, internal consistency, and translation) but need to be improved on other aspects. The most important methodological aspects that need to be developed are as follows: measurement error, content validity, structural validity, cross-cultural validity, criterion validity, and interpretability. Considering the importance of adequate measurement properties, it is concluded that, in the field of rotator cuff pathology, there is room for improvement in the methodological quality of studies measurement properties. II.

Leadership qualities when providing therapy for women who suffer from eating difficulties.

PubMed

Rørtveit, Kristine; Severinsson, Elisabeth

2012-07-01

The aim of this study was to reflect on aspects of mental health nursing leadership qualities with special focus on the therapeutic process for women who suffer from eating difficulties (ED). Therapy for patients with ED involves motivating them to make meaningful changes. Leadership qualities in MHN should focus on the relationship with the patient and positive empowerment processes. In-depth interviews were conducted with six women suffering from ED who had participated in art therapy. The interviews were analysed by means of an interpretative hermeneutic approach. A main theme 'The mental health nurse as a formative and mindful leader in a group therapeutic relationship' and two themes 'Leading sensitively towards awakening the patients' awareness of their pre-understanding' and 'Leading dialectically towards solving patients' existential dilemmas' were developed and comprised two aspects of leadership. The nurse-patient relationship is influenced by the patients' pre-understanding and existential dilemmas. Leadership qualities associated with being formative and mindful represent important aspects of this relationship and should be investigated and thematically described in greater detail in future research. The nurse-patient relationship should focus on clinical supervision, in order to strengthen the nurses' leadership qualities in terms of being aware and dialectical. © 2011 Blackwell Publishing Ltd.

Situation awareness and trust in computer-based procedures in nuclear power plant operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Throneburg, E. B.; Jones, J. M.

2006-07-01

Situation awareness and trust are two issues that need to be addressed in the design of computer-based procedures for nuclear power plants. Situation awareness, in relation to computer-based procedures, concerns the operators' knowledge of the plant's state while following the procedures. Trust concerns the amount of faith that the operators put into the automated procedures, which can affect situation awareness. This paper first discusses the advantages and disadvantages of computer-based procedures. It then discusses the known aspects of situation awareness and trust as applied to computer-based procedures in nuclear power plants. An outline of a proposed experiment is then presentedmore » that includes methods of measuring situation awareness and trust so that these aspects can be analyzed for further study. (authors)« less

Societal and ethical aspects of the Fukushima accident.

PubMed

Oughton, Deborah

2016-10-01

The Fukushima Nuclear Power Station accident in Japan in 2011 was a poignant reminder that radioactive contamination of the environment has consequences that encompass far more than health risks from exposure to radiation. Both the accident and remediation measures have resulted in serious societal impacts and raise questions about the ethical aspects of risk management. This article presents a brief review of some of these issues and compares similarities and differences with the lessons learned from the 1986 Chernobyl Nuclear Power Plant accident in Ukraine. Integr Environ Assess Manag 2016;12:651-653. © 2016 SETAC. © 2016 SETAC.

Report of the panel on theoretical aerodynamics. [for the National Transonic Facility

NASA Technical Reports Server (NTRS)

Bobbitt, P. J.; Carter, J. E.

1977-01-01

Requirements for flow quality in the National Transonic Facility are explored. Viscous flow effects of concern to theoreticians are discussed. Experiments outlined for theory validation in the facility include validating high aspect ratio wing-body combination; low aspect ratio moderately swept wing; low aspect ratio highly swept wing; high lift systems on high aspect ration wings; Reynolds number scaling; dynamic shock- boundary layer interaction; and the effect of R and M on dynamic stall.

Optimization of light quality from color mixing light-emitting diode systems for general lighting

NASA Astrophysics Data System (ADS)

Thorseth, Anders

2012-03-01

Given the problem of metamerisms inherent in color mixing in light-emitting diode (LED) systems with more than three distinct colors, a method for optimizing the spectral output of multicolor LED system with regards to standardized light quality parameters has been developed. The composite spectral power distribution from the LEDs are simulated using spectral radiometric measurements of single commercially available LEDs for varying input power, to account for the efficiency droop and other non-linear effects in electrical power vs. light output. The method uses electrical input powers as input parameters in a randomized steepest decent optimization. The resulting spectral power distributions are evaluated with regard to the light quality using the standard characteristics: CIE color rendering index, correlated color temperature and chromaticity distance. The results indicate Pareto optimal boundaries for each system, mapping the capabilities of the simulated lighting systems with regard to the light quality characteristics.

Meanings and aspects of quality of life for cancer patients: a descriptive exploratory qualitative study.

PubMed

Bahrami, Masoud

2011-08-01

Given the importance of quality of life (QoL) for cancer patients, it is important to work out what this concept means not only for cancer patients, and for the nurses who care for them, but also the aspects of which it is composed. Therefore, an interpretive research study was conducted to explore in-depth meanings and aspects of QoL as expressed by cancer nurses. Participants were selected from different inpatient and outpatient oncology services and a palliative setting in Adelaide, South Australia. Results showed that many aspects contribute to an individual's QoL. These include the physical, the psychological, the spiritual, and both environmental and social interactions. More importantly, participants stated that spirituality is multifaceted and that there may be aspects in life that may be taken for granted. The meaning of patients' QoL was viewed by nurses as a patient's overall happiness and satisfaction. Also, nurses identified that providing choices to patients made an important contribution to a patient's QoL. Therefore, this exploration into the in-depth meanings and aspects of QoL for cancer patients from nurses' perspectives identified that, in addition to the aspects related to QoL that have been identified previously in the literature, aspects related to spirituality would need to be extensively covered, and providing choices to patients would be important in patients' QoL in an Australian setting.

Measuring patients' experiences with rheumatic care: the consumer quality index rheumatoid arthritis.

PubMed

Zuidgeest, Marloes; Sixma, Herman; Rademakers, Jany

2009-12-01

Rheumatologists and other caregivers can learn from patients’ experiences with the quality of care that can be measured with the CQ-index Rheumatoid Arthritis (CQ-index RA) survey. Patients with RA (n = 590) received this survey were they rated their actual experiences and what they find important in rheumatic healthcare. Descriptive analyses and psychometric methods were used to test the reliability. The response rate was 69%. The items in the pilot instrument could be grouped into 10 scales (α ranged from 0.77 to 0.94). The most important quality aspects according to patients concerned the alertness when prescribing medication. Providing patients with information on a special website of the hospital about RA was the highest quality improvement aspect. The results of this study show that the CQ-index RA is a reliable instrument for quality assessment from the patients’ perspective. The instrument provides rheumatologists and other caregivers with feedback for service improvement initiatives.

Sterile products: advances and challenges in formulation, manufacturing and regulatory aspects--a regulatory review perspective.

PubMed

Hussong, David

2010-09-01

For several decades, the FDA has undertaken many initiatives to improve the quality and safety of sterile drug products. In recent years, efforts have also been undertaken to accelerate the rate for application approval by adding earlier involvement of microbiology reviewers in drug development. Product and manufacturing process development, as well as safe use and product design, are among the elements of enhanced technical involvement. An overview of the product quality microbiology aspects for sterile drugs is provided.

Model for integrated management of quality, labor risks prevention, environment and ethical aspects, applied to R&D&I and production processes in an organization

NASA Astrophysics Data System (ADS)

González, M. R.; Torres, F.; Yoldi, V.; Arcega, F.; Plaza, I.

2012-04-01

It is proposed an integrated management model for an organization. This model is based on the continuous improvement Plan-Do-Check-Act cycle and it intends to integrate the environmental, risk prevention and ethical aspects as well as research, development and innovation projects management in the general quality management structure proposed by ISO 9001:2008. It aims to fulfill the standards ISO 9001, ISO 14001, OSHAS 18001, SGE 21 y 166002.

Performance Analysis of Isolated Hybrid Power Plant Model with Dynamic Load Conditions - Morning, Noon and Afternoon Transitions

NASA Astrophysics Data System (ADS)

Irawati, Rina

2018-02-01

Diesel Generator with Photovoltaic Hybrid Power Plant is one of the solutions for supply electric demand to isolated area. The energy sources that can be used for hybrid system are such as photovoltaic, wind turbine, and biomass or biogas, because these sources are almost available in every isolated area. This research used a model of hybrid system from diesel generator and 1.28 kWp photovoltaic power plant. The reliability and some of power quality of this system tested by 1300VA house hold daily load characteristic effectively 24 hour. Power quality and some electricity parameters during transition mode for each resource will be analyzed. Furthermore the power quality analyze will be conducted and evaluated base on Electrical Engineers' Association (EEA).

Applications for Compact Portable Pulsed Power: Rocket Science, Cancer Therapy, and the Movies

DTIC Science & Technology

2006-05-01

include workshops at the American Film Institute for teaching scriptwriting and other aspects of the film industry to scientists and engineers. 1...oriented comedy feature film, “Real Genius”, which provided an introduction to many interesting aspects of the film industry , not the least of

Beyond imperviousness: A statistical approach to identifying functional differences between development morphologies on variable source area-type response in urbanized watersheds

NASA Astrophysics Data System (ADS)

Lim, T. C.

2016-12-01

Empirical evidence has shown linkages between urbanization, hydrological regime change, and degradation of water quality and aquatic habitat. Percent imperviousness, has long been suggested as the dominant source of these negative changes. However, recent research identifying alternative pathways of runoff production at the watershed scale have called into question percent impervious surface area's primacy in urban runoff production compared to other aspects of urbanization including change in vegetative cover, imported water and water leakages, and the presence of drainage infrastructure. In this research I show how a robust statistical methodology can detect evidence of variable source area (VSA)-type hydrologic response associated with incremental hydraulic connectivity in watersheds. I then use logistic regression to explore how evidence of VSA-type response relates to the physical and meterological characteristics of the watershed. I find that impervious surface area is highly correlated with development, but does not add significant explanatory power beyond percent developed in predicting VSA-type response. Other aspects of development morphology, including percent developed open space and type of drainage infrastructure also do not add to the explanatory power of undeveloped land in predicting VSA-type response. Within only developed areas, the effect of developed open space was found to be more similar to that of total impervious area than to undeveloped land. These findings were consistent when tested across a national cross-section of urbanized watersheds, a higher resolution dataset of Baltimore Metropolitan Area watersheds, and a subsample of watersheds confirmed not to be served by combined sewer systems. These findings suggest that land development policies that focus on lot coverage should be revisited, and more focus should be placed on preserving native vegetation and soil conditions alongside development.

MOOCs--Theoretical and Practical Aspects: Comparison of Selected Research Results: Poland, Russia, Ukraine, and Australia

ERIC Educational Resources Information Center

Smyrnova-Trybulska, Eugenia; Ogrodzka-Mazur, Ewa; Szafranska-Gajdzica, Anna; Morze, Nataliia; Makhachashvili, Rusudan; Noskova, Tatiana; Pavlova, Tatiana; Yakovleva, Olga; Issa, Tomayess; Issa, Theodora

2016-01-01

Many higher education students are interested in MOOCs. At the same time, numerous questions are still without answers: formal aspects of participation in MOOCs, the type of motivation on the part of students for participation in MOOCs, quality of MOOCs, students' opinions about type, structure, contents, communication in MOOCs and other aspects.…

Control system development for a 1 MW/e/ solar thermal power plant

NASA Technical Reports Server (NTRS)

Daubert, E. R.; Bergthold, F. M., Jr.; Fulton, D. G.

1981-01-01

The point-focusing distributed receiver power plant considered consists of a number of power modules delivering power to a central collection point. Each power module contains a parabolic dish concentrator with a closed-cycle receiver/turbine/alternator assembly. Currently, a single-module prototype plant is under construction. The major control system tasks required are related to concentrator pointing control, receiver temperature control, and turbine speed control. Attention is given to operational control details, control hardware and software, and aspects of CRT output display.

10 CFR Appendix B to Part 50 - Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Quality Assurance Criteria for Nuclear Power Plants and... LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Pt. 50, App. B Appendix B to Part 50—Quality Assurance... report a description of the quality assurance program to be applied to the design, fabrication...

International magnetic pulse compression

NASA Astrophysics Data System (ADS)

Kirbie, H. C.; Newton, M. A.; Siemens, P. D.

1991-04-01

Although pulsed-power engineering traditionally has been practiced by a fairly small, close community in the areas of defense and energy research, it is becoming more common in high-power, high-energy commercial pursuits such as material processing and lasers. This paper is a synopsis of the Feb. 12-14, 1990 workshop on magnetic switching as it applies primarily to pulse compression (power transformation). During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format proved ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card - its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.

International magnetic pulse compression

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirbie, H.C.; Newton, M.A.; Siemens, P.D.

1991-04-01

Although pulsed-power engineering traditionally has been practiced by a fairly small, close community in the areas of defense and energy research, it is becoming more common in high-power, high-energy commercial pursuits such as material processing and lasers. This paper is a synopsis of the Feb. 12--14, 1990 workshop on magnetic switching as it applies primarily to pulse compression (power transformation). During the course of the Workshop at Granlibakken, a great deal of information was amassed and a keen insight into both the problems and opportunities as to the use of this switching approach was developed. The segmented workshop format provedmore » ideal for identifying key aspects affecting optimum performance in a variety of applications. Individual groups of experts addressed network and system modeling, magnetic materials, power conditioning, core cooling and dielectrics, and finally circuits and application. At the end, they came together to consolidate their input and formulate the workshop's conclusions, identifying roadblocks or suggesting research projects, particularly as they apply to magnetic switching's trump card -- its high-average-power-handling capability (at least on a burst-mode basis). The workshop was especially productive both in the quality and quantity of information transfer in an environment conducive to a free and open exchange of ideas. We will not delve into the organization proper of this meeting, rather we wish to commend to the interested reader this volume, which provides the definitive and most up-to-date compilation on the subject of magnetic pulse compression from underlying principles to current state of the art as well as the prognosis for the future of magnetic pulse compression as a consensus of the workshop's organizers and participants.« less

External Quality Arrangements for Scotland's Colleges

ERIC Educational Resources Information Center

Her Majesty's Inspectorate of Education, 2008

2008-01-01

This document represents an innovative and radical landmark in the development of external quality arrangements for Scotland's colleges. The quality framework and arrangements for annual engagement, subject-based aspect reports, and external review reflect new thinking nationally, within HMIE, in the Scottish Further and Higher Education Funding…

Academic Achievement Standards and Quality Assurance

ERIC Educational Resources Information Center

Sadler, D. Royce

2017-01-01

Quality assurance processes have been applied to many aspects of higher education, including teaching, learning and assessment. At least in the latter domain, quality assurance needs its fundamental tenets critically scrutinised. A common but inadequate approach has been to identify and promote learning environment changes "likely to…

Morphology Engineering: A Route to Highly Reproducible and High Efficiency Perovskite Solar Cells.

PubMed

Bi, Dongqin; Luo, Jingshan; Zhang, Fei; Magrez, Arnaud; Athanasopoulou, Evangelia Nefeli; Hagfeldt, Anders; Grätzel, Michael

2017-04-10

Despite the rapid increase in the performance of perovskite solar cells (PSC), they still suffer from low lab-to-lab or people-to-people reproducibility. Aiming for a universal condition to high-performance devices, we investigated the morphology evolution of a composite perovskite by tuning annealing temperature and precursor concentration of the perovskite film. Here, we introduce thermal annealing as a powerful tool to generate a well-controlled excess of PbI 2 in the perovskite formulation and show that this benefits the photovoltaic performance. We demonstrated the correlation between the film microstructure and electronic property and device performance. An optimized average grain size/thickness aspect ratio of the perovskite crystallite is identified, which brings about a highly reproducible power conversion efficiency (PCE) of 19.5 %, with a certified value of 19.08 %. Negligible hysteresis and outstanding morphology stability are observed with these devices. These findings lay the foundation for further boosting the PCE of PSC and can be very instructive for fabrication of high-quality perovskite films for a variety of applications, such as light-emitting diodes, field-effect transistors, and photodetectors. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Title: Freshwater phytoplankton responses to global warming.

PubMed

Wagner, Heiko; Fanesi, Andrea; Wilhelm, Christian

2016-09-20

Global warming alters species composition and function of freshwater ecosystems. However, the impact of temperature on primary productivity is not sufficiently understood and water quality models need to be improved in order to assess the quantitative and qualitative changes of aquatic communities. On the basis of experimental data, we demonstrate that the commonly used photosynthetic and water chemistry parameters alone are not sufficient for modeling phytoplankton growth under changing temperature regimes. We present some new aspects of the acclimation process with respect to temperature and how contrasting responses may be explained by a more complete physiological knowledge of the energy flow from photons to new biomass. We further suggest including additional bio-markers/traits for algal growth such as carbon allocation patterns to increase the explanatory power of such models. Although carbon allocation patterns are promising and functional cellular traits for growth prediction under different nutrient and light conditions, their predictive power still waits to be tested with respect to temperature. A great challenge for the near future will be the prediction of primary production efficiencies under the global change scenario using a uniform model for phytoplankton assemblages. Copyright © 2016 Elsevier GmbH. All rights reserved.

Direct observation of phase-sensitive Hong-Ou-Mandel interference

NASA Astrophysics Data System (ADS)

Marek, Petr; Zapletal, Petr; Filip, Radim; Hashimoto, Yosuke; Toyama, Takeshi; Yoshikawa, Jun-ichi; Makino, Kenzo; Furusawa, Akira

2017-09-01

The quality of individual photons and their ability to interfere are traditionally tested by measuring the Hong-Ou-Mandel photon bunching effect. However, this phase-insensitive measurement only tests the particle aspect of the quantum interference, leaving out the phase-sensitive aspects relevant for continuous-variable processing. To overcome these limitations we formulate a witness capable of recognizing both the indistinguishability of the single photons and their quality with regard to their continuous-variable utilization. We exploit the conditional nonclassical squeezing and show that it can reveal both the particle and the wave aspects of the quantum interference in a single set of direct measurements. We experimentally test the witness by applying it to a pair of independent single photons retrieved on demand.

Nuclear power sources in outer space. [spacecraft propulsion legal aspects

NASA Technical Reports Server (NTRS)

Hosenball, S. N.

1978-01-01

Legal problems associated with nuclear power sources in space are discussed with particular reference to the Cosmos 954 incident. Deliberations of the Legal and Scientific and Technical Subcommittees on the Peaceful Uses of Outer Space on this subject are discussed.

An Improved Power Quality BIBRED Converter-Based VSI-Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2014-01-01

This paper presents an IHQRR (integrated high-quality rectifier regulator) BIBRED (boost integrated buck rectifier energy storage DC-DC) converter-based VSI (voltage source inverter)-fed BLDC (brushless DC) motor drive. The speed control of BLDC motor is achieved by controlling the DC link voltage of the VSI using a single voltage sensor. This allows VSI to operate in fundamental frequency switching mode for electronic commutation of BLDC motor which reduces the switching losses due to high-frequency switching used in conventional approach of PWM (pulse width modulation)-based VSI-fed BLDC motor drive. A BIBRED converter is operated in a dual-DCM (discontinuous conduction mode) thus using a voltage follower approach for PFC (power factor correction) and DC link voltage control. The performance of the proposed drive is evaluated for improved power quality over a wide range of speed control and supply voltage variation for demonstrating the behavior of proposed drive. The power quality indices thus obtained are within the recommended limits by international PQ (power quality) standards such as IEC 61000-3-2.

Eco-innovative design approach: Integrating quality and environmental aspects in prioritizing and solving engineering problems

NASA Astrophysics Data System (ADS)

Chakroun, Mahmoud; Gogu, Grigore; Pacaud, Thomas; Thirion, François

2014-09-01

This study proposes an eco-innovative design process taking into consideration quality and environmental aspects in prioritizing and solving technical engineering problems. This approach provides a synergy between the Life Cycle Assessment (LCA), the nonquality matrix, the Theory of Inventive Problem Solving (TRIZ), morphological analysis and the Analytical Hierarchy Process (AHP). In the sequence of these tools, LCA assesses the environmental impacts generated by the system. Then, for a better consideration of environmental aspects, a new tool is developed, the non-quality matrix, which defines the problem to be solved first from an environmental point of view. The TRIZ method allows the generation of new concepts and contradiction resolution. Then, the morphological analysis offers the possibility of extending the search space of solutions in a design problem in a systematic way. Finally, the AHP identifies the promising solution(s) by providing a clear logic for the choice made. Their usefulness has been demonstrated through their application to a case study involving a centrifugal spreader with spinning discs.

[Factors associated with the quality of life of community health agents].

PubMed

Mascarenhas, Claudio Henrique Meira; Prado, Fabio Ornellas; Fernandes, Marcos Henrique

2013-05-01

This study examined the association of socio-demographic, occupational and risk and health behavioral factors with the loss of quality of life for community health agents of the municipality of Jequié in the state of Bahia. It is a cross-sectional study with 316 individuals, in which WHOQOL-Bref was used to evaluate the quality of life. The Poisson regression model was applied adopting the confidence interval of 95%. The variables associated with the largest threat to the Physical domain were gender, age, pain and satisfaction with health. Threats to the Psychological domain were schooling, psycho-social aspects, smoking, pain and satisfaction with health were analyzed. Threats to the Social Relations domain of were sex, marital situation, schooling, psycho-social aspects, and satisfaction with health. Threats to the Environmental domain were sex, family income, workplace, psycho-social aspects and satisfaction with health. It is hoped that this study will foster the development of public policies designed to enhance the conditions of life and work of this group of workers.

Challenging the balance of power: patient empowerment.

PubMed

Hewitt-Taylor, Jaquelina

Empowering patients is a central element of nursing care, according to the RCN (2003). This article discusses the reality of changing the balance of power in health care, awareness of types of knowledge and the ways in which power may consciously or subconsciously be used. It also includes awareness of the financial and political aspects of health care and how these affect patient choice.

The Ghost Is the Machine: How Can We Visibilize the Unseen Norms and Power of Global Health?

PubMed Central

Forman, Lisa

2016-01-01

In his recent commentary, Gorik Ooms argues that "denying that researchers, like all humans, have personal opinions ... drives researchers’ personal opinion underground, turning global health science into unconscious dogmatism or stealth advocacy, avoiding the crucial debate about the politics and underlying normative premises of global health." These ‘unconscious’ dimensions of global health are as Ooms and others suggest, rooted in its unacknowledged normative, political and power aspects. But why would these aspects be either unconscious or unacknowledged? In this commentary, I argue that the ‘unconscious’ and ‘unacknowledged’ nature of the norms, politics and power that drive global health is a direct byproduct of the processes through which power operates, and a primary mechanism by which power sustains and reinforces itself. To identify what is unconscious and unacknowledged requires more than broadening the disciplinary base of global health research to those social sciences with deep traditions of thought in the domains of power, politics and norms, albeit that doing so is a fundamental first step. I argue that it also requires individual and institutional commitments to adopt reflexive, humble and above all else, equitable practices within global health research. PMID:26927592

Fuel cells provide a revenue-generating solution to power quality problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, J.M. Jr.

Electric power quality and reliability are becoming increasingly important as computers and microprocessors assume a larger role in commercial, health care and industrial buildings and processes. At the same time, constraints on transmission and distribution of power from central stations are making local areas vulnerable to low voltage, load addition limitations, power quality and power reliability problems. Many customers currently utilize some form of premium power in the form of standby generators and/or UPS systems. These include customers where continuous power is required because of health and safety or security reasons (hospitals, nursing homes, places of public assembly, air trafficmore » control, military installations, telecommunications, etc.) These also include customers with industrial or commercial processes which can`t tolerance an interruption of power because of product loss or equipment damage. The paper discusses the use of the PC25 fuel cell power plant for backup and parallel power supplies for critical industrial applications. Several PC25 installations are described: the use of propane in a PC25; the use by rural cooperatives; and a demonstration of PC25 technology using landfill gas.« less

18 CFR 801.7 - Water quality.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Water quality. 801.7 Section 801.7 Conservation of Power and Water Resources SUSQUEHANNA RIVER BASIN COMMISSION GENERAL POLICIES § 801.7 Water quality. (a) The signatory States have the primary responsibility in the basin for...

Knowledge, Power and Meanings Shaping Quality Assurance in Higher Education: A Systemic Critique

ERIC Educational Resources Information Center

Houston, Don; Paewai, Shelley

2013-01-01

Internationally, quality assurance schemes persist despite long-standing dissatisfaction and critique of their impact and outcomes. Adopting a critical systems perspective, the article explores the relationships between the knowledge, power and meanings that stakeholder groups bring to the design and implementation of quality assurance systems.…

18 CFR 801.7 - Water quality.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 2 2014-04-01 2014-04-01 false Water quality. 801.7 Section 801.7 Conservation of Power and Water Resources SUSQUEHANNA RIVER BASIN COMMISSION GENERAL POLICIES § 801.7 Water quality. (a) The signatory States have the primary responsibility in the basin for...

18 CFR 801.7 - Water quality.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 2 2012-04-01 2012-04-01 false Water quality. 801.7 Section 801.7 Conservation of Power and Water Resources SUSQUEHANNA RIVER BASIN COMMISSION GENERAL POLICIES § 801.7 Water quality. (a) The signatory States have the primary responsibility in the basin for...

18 CFR 801.7 - Water quality.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 2 2013-04-01 2012-04-01 true Water quality. 801.7 Section 801.7 Conservation of Power and Water Resources SUSQUEHANNA RIVER BASIN COMMISSION GENERAL POLICIES § 801.7 Water quality. (a) The signatory States have the primary responsibility in the basin for...

Service quality of delivered care from the perception of women with caesarean section and normal delivery.

PubMed

Tabrizi, Jafar S; Askari, Samira; Fardiazar, Zahra; Koshavar, Hossein; Gholipour, Kamal

2014-01-01

Our aim was to determine the service quality of delivered care for people with Caesarean Section and Normal Delivery. A cross-sectional study was conducted among 200 people who had caesarean section and normal delivery in Al-Zahra Teaching Hospital in Tabriz, north western Iran. Service quality was calculated using: Service Quality = 10 - (Importance × Performance) based on importance and performance of service quality aspects from the postpartum women's perspective.A hierarchical regression analysis was applied in two steps using the enter method to examine the associations between demographics and SQ scores. Data were analysed using the SPSS-17 software. "Confidentiality", "autonomy", "choice of care provider" and "communication" achieved scores at the highest level of quality; and "support group", "prompt attention", "prevention and early detection", "continuity of care", "dignity", "safety", "accessibility and "basic amenities" got service quality score less than eight. Statistically significant relationship was found between service quality score and continuity of care (P=0.008). A notable gap between the participants‟ expectations and what they have actually received in most aspects of provided care. So, there is an opportunityto improve the quality of delivered care.

Fundamentals of quality and safety in diagnostic radiology.

PubMed

Bruno, Michael A; Nagy, Paul

2014-12-01

The most fundamental aspects of quality and safety in radiology are reviewed, including a brief history of the quality and safety movement as applied to radiology, the overarching considerations of organizational culture, team building, choosing appropriate goals and metrics, and the radiologist's quality "tool kit." Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Does Internal Quality Management Contribute to More Control or to Improvement of Higher Education?: A Survey on Faculty's Perceptions

ERIC Educational Resources Information Center

Kleijnen, Jan; Dolmans, Diana; Willems, Jos; van Hout, Hans

2011-01-01

Purpose: The purpose of this paper is to explore faculty's perceptions of quality management activities (QMA) within their departments, attention being paid to relevant quality aspects and whether quality management contributes to control or improvement of higher education. Furthermore, it examines differences between departments and relationships…

Agreement in Quality of Life Assessment between Adolescents with Intellectual Disability and Their Parents

ERIC Educational Resources Information Center

Golubovic, Spela; Skrbic, Renata

2013-01-01

Intellectual disability affects different aspects of functioning and quality of life, as well as the ability to independently assess the quality of life itself. The paper examines the agreement in the quality of life assessments made by adolescents with intellectual disability and their parents compared with assessments made by adolescents without…

Identification of differentially expressed miRNAs potentially associated with egg quality in rainbow trout (Oncorhynchus mykiss)

USDA-ARS?s Scientific Manuscript database

Egg quality is an important aspect in rainbow trout farming. Previous studies have shown that many environmental factors impact egg quality. However, the most obvious effects on egg quality were associated with post-ovulatory ageing of the eggs. The objective of this study was to identify miRNAs tha...

Quality of Child Care Using the Environment Rating Scales: A Meta-Analysis of International Studies

ERIC Educational Resources Information Center

Vermeer, Harriet J.; van IJzendoorn, Marinus H.; Cárcamo, Rodrigo A.; Harrison, Linda J.

2016-01-01

The current study provides a systematic examination of child care quality around the globe, using the Environment Rating Scales (ERS). Additional goals of this study are to examine associations between ERS process quality and structural features (group size, caregiver-child ratio) that underpin quality and between ERS and more proximal aspects of…

Academic Staff Quality in Higher Education: An Empirical Analysis of Portuguese Public Administration Education

ERIC Educational Resources Information Center

Sarrico, Cláudia S.; Alves, André A.

2016-01-01

Higher education accreditation frameworks typically consider academic staff quality a key element. This article embarks on an empirical study of what academic staff quality means, how it is measured, and how different aspects of staff quality relate to each other. It draws on the relatively nascent Portuguese experience with study programme…

Research on improvement of power quality of Micro - grid based on SVG pulse load

NASA Astrophysics Data System (ADS)

Lv, Chuang; Xie, Pu

2017-05-01

Pulse load will make the micro-grid public bus power to produce a high peak pulse due to its cyclical pulsation characteristics,, and make the micro-grid voltage fluctuations, frequency fluctuations, voltage and current distortion, power factor reduction and other adverse effects. In order to suppress the adverse effects of the pulse load on the microgrid and improve the power quality of the microgrid, this paper established the SVG simulation model in Matlab / Simulink environment, the superiority of SVG is verified by comparing the improvement of power quality before and after adding the SVG to microgrid system. The results show that the SVG model can suppress the adverse effects effectively of the pulse load on the microgrid, which is of great value and significance to the reactive power compensation and harmonic suppression of the microgrid.

Development of high-average-power DPSSL with high beam quality

NASA Astrophysics Data System (ADS)

Nakai, Sadao; Kanabe, Tadashi; Kawashima, Toshiyuki; Yamanaka, Masanobu; Izawa, Yasukazu; Nakatuka, Masahiro; Kandasamy, Ranganathan; Kan, Hirofumi; Hiruma, Teruo; Niino, Masayuki

2000-08-01

The recent progress of high power diode laser is opening new fields of laser and its application. We are developing high average power diode pumped solid state laser DPSSL for laser fusion power plant, for space propulsion and for various applications in industry. The common features or requirements of our High Average-power Laser for Nuclear-fusion Application (HALNA) are large pulse energy with relatively low repetition of few tens Hz, good beam quality of order of diffraction limit and high efficiency more than 10%. We constructed HALNA 10 (10J X 10 Hz) and tested the performance to clarify the scalability to higher power system. We have obtained in a preliminary experiment a 8.5 J output energy at 0.5 Hz with beam quality of 2 times diffraction limited far-field pattern.

Computed lateral rate and acceleration power spectral response of conventional and STOL airplanes to atmospheric turbulence

NASA Technical Reports Server (NTRS)

Lichtenstein, J. H.

1975-01-01

Power-spectral-density calculations were made of the lateral responses to atmospheric turbulence for several conventional and short take-off and landing (STOL) airplanes. The turbulence was modeled as three orthogonal velocity components, which were uncorrelated, and each was represented with a one-dimensional power spectrum. Power spectral densities were computed for displacements, rates, and accelerations in roll, yaw, and sideslip. In addition, the power spectral density of the transverse acceleration was computed. Evaluation of ride quality based on a specific ride quality criterion was also made. The results show that the STOL airplanes generally had larger values for the rate and acceleration power spectra (and, consequently, larger corresponding root-mean-square values) than the conventional airplanes. The ride quality criterion gave poorer ratings to the STOL airplanes than to the conventional airplanes.

Design of experiments and data analysis challenges in calibration for forensics applications

DOE PAGES

Anderson-Cook, Christine M.; Burr, Thomas L.; Hamada, Michael S.; ...

2015-07-15

Forensic science aims to infer characteristics of source terms using measured observables. Our focus is on statistical design of experiments and data analysis challenges arising in nuclear forensics. More specifically, we focus on inferring aspects of experimental conditions (of a process to produce product Pu oxide powder), such as temperature, nitric acid concentration, and Pu concentration, using measured features of the product Pu oxide powder. The measured features, Y, include trace chemical concentrations and particle morphology such as particle size and shape of the produced Pu oxide power particles. Making inferences about the nature of inputs X that were usedmore » to create nuclear materials having particular characteristics, Y, is an inverse problem. Therefore, statistical analysis can be used to identify the best set (or sets) of Xs for a new set of observed responses Y. One can fit a model (or models) such as Υ = f(Χ) + error, for each of the responses, based on a calibration experiment and then “invert” to solve for the best set of Xs for a new set of Ys. This perspectives paper uses archived experimental data to consider aspects of data collection and experiment design for the calibration data to maximize the quality of the predicted Ys in the forward models; that is, we assume that well-estimated forward models are effective in the inverse problem. In addition, we consider how to identify a best solution for the inferred X, and evaluate the quality of the result and its robustness to a variety of initial assumptions, and different correlation structures between the responses. In addition, we also briefly review recent advances in metrology issues related to characterizing particle morphology measurements used in the response vector, Y.« less

Design of experiments and data analysis challenges in calibration for forensics applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson-Cook, Christine M.; Burr, Thomas L.; Hamada, Michael S.

Forensic science aims to infer characteristics of source terms using measured observables. Our focus is on statistical design of experiments and data analysis challenges arising in nuclear forensics. More specifically, we focus on inferring aspects of experimental conditions (of a process to produce product Pu oxide powder), such as temperature, nitric acid concentration, and Pu concentration, using measured features of the product Pu oxide powder. The measured features, Y, include trace chemical concentrations and particle morphology such as particle size and shape of the produced Pu oxide power particles. Making inferences about the nature of inputs X that were usedmore » to create nuclear materials having particular characteristics, Y, is an inverse problem. Therefore, statistical analysis can be used to identify the best set (or sets) of Xs for a new set of observed responses Y. One can fit a model (or models) such as Υ = f(Χ) + error, for each of the responses, based on a calibration experiment and then “invert” to solve for the best set of Xs for a new set of Ys. This perspectives paper uses archived experimental data to consider aspects of data collection and experiment design for the calibration data to maximize the quality of the predicted Ys in the forward models; that is, we assume that well-estimated forward models are effective in the inverse problem. In addition, we consider how to identify a best solution for the inferred X, and evaluate the quality of the result and its robustness to a variety of initial assumptions, and different correlation structures between the responses. In addition, we also briefly review recent advances in metrology issues related to characterizing particle morphology measurements used in the response vector, Y.« less

Bulk vertical micromachining of single-crystal sapphire using inductively coupled plasma etching for x-ray resonant cavities

NASA Astrophysics Data System (ADS)

Chen, P.-C.; Lin, P.-T.; Mikolas, D. G.; Tsai, Y.-W.; Wang, Y.-L.; Fu, C.-C.; Chang, S.-L.

2015-01-01

To provide coherent x-ray sources for probing the dynamic structures of solid or liquid biological substances on the picosecond timescale, a high-aspect-ratio x-ray resonator cavity etched from a single crystal substrate with a nearly vertical sidewall structure is required. Although high-aspect-ratio resonator cavities have been produced in silicon, they suffer from unwanted multiple beam effects. However, this problem can be avoided by using the reduced symmetry of single-crystal sapphire in which x-ray cavities may produce a highly monochromatic transmitted x-ray beam. In this study, we performed nominal 100 µm deep etching and vertical sidewall profiles in single crystal sapphire using inductively coupled plasma (ICP) etching. The large depth is required to intercept a useful fraction of a stopped-down x-ray beam, as well as for beam clearance. An electroplated Ni hard mask was patterned using KMPR 1050 photoresist and contact lithography. The quality and performance of the x-ray cavity depended upon the uniformity of the cavity gap and therefore verticality of the fabricated vertical sidewall. To our knowledge, this is the first report of such deep, vertical etching of single-crystal sapphire. A gas mixture of Cl2/BCl3/Ar was used to etch the sapphire with process variables including BCl3 flow ratio and bias power. By etching for 540 min under optimal conditions, we obtained an x-ray resonant cavity with a depth of 95 µm, width of ~30 µm, gap of ~115 µm and sidewall profile internal angle of 89.5°. The results show that the etching parameters affected the quality of the vertical sidewall, which is essential for good x-ray resonant cavities.

Health-related quality of life and burden of disease in chronic pain measured with the 15D instrument.

PubMed

Vartiainen, Pekka; Heiskanen, Tarja; Sintonen, Harri; Roine, Risto P; Kalso, Eija

2016-10-01

Health-related quality of life (HRQoL) measurement aims to capture the complete, subjective health state of the patients and to comprehensively evaluate treatment outcomes. The aim of this study was to assess, using the 15D HRQoL instrument, HRQoL in a sample of 1528 chronic pain patients, referred to the multidisciplinary pain clinic of the Helsinki University Hospital during 2004 to 2012. The 15D results of the chronic pain patients were compared with those of a matched general population. To analyse the properties of the 15D, the results were compared with the preadmission questionnaire of the pain clinic, containing questions about background factors, aspects of the pain, and its impact on life. The mean 15D score of the chronic pain patients was one of the lowest reported using 15D; 0.710 vs 0.922 in the general population. It equalled the score of advanced cancer patients in palliative care. The 15D scores were normally distributed, and 15D showed both statistically and clinically significant discriminative power in pain-related background factors. Visual analogue scale on pain intensity, visual analogue scale on pain-related distress, and the impact of pain on daily life correlated well with the 15D score. Pain intensity did not have independent predictive value on the score. The results indicate heavy perceived burden of illness in chronic pain patients. In light of the questions analysed, 15D appears sensitive and discriminative in chronic pain patients in tertiary care. Instead of pain intensity, the impaired HRQoL in chronic pain was mainly because of the psychosocial aspects of pain.

COMPUTATIONAL ASPECTS OF THE AIR QUALITY FORECASTING VERSION OF CMAQ (CMAQ-F)

EPA Science Inventory

The air quality forecast version of the Community Modeling Air Quality (CMAQ) model (CMAQ-F) was developed from the public release version of CMAQ (available from http://www.cmascenter.org), and is running operationally at the National Weather Service's National Centers for Envir...

Influences on Evaluation Quality

ERIC Educational Resources Information Center

Cooksy, Leslie J.; Mark, Melvin M.

2012-01-01

Attention to evaluation quality is commonplace, even if sometimes implicit. Drawing on her 2010 Presidential Address to the American Evaluation Association, Leslie Cooksy suggests that evaluation quality depends, at least in part, on the intersection of three factors: (a) evaluator competency, (b) aspects of the evaluation environment or context,…

Can we make reports of end-of-life care quality more consumer-focused? results of a nationwide quality measurement program.

PubMed

Smith, Dawn; Caragian, Nicole; Kazlo, Elena; Bernstein, Jennie; Richardson, Diane; Casarett, David

2011-03-01

The goal of this study was to define families' priorities for various aspects of end-of-life care, and to determine whether scores that reflect these priorities alter facilities' quality rankings. Nationwide telephone survey. 62 VA medical centers, including acute and long term care. For each patient who died in a participating facility, one family member was invited to participate. A survey included 14 items describing key aspects of the patient's care in his or her last month of life, and one global rating. A weighted score was calculated based on the association between each item and the global rating. Interviews were completed with family members for 3,897 of 7,110 patients (55%). Items showed an approximately 5-fold range of weights, indicating a wide variation in the importance that families placed on aspects of palliative care (low: pain management, weight = 0.54, 95% CI 0.38-0.70;/P/<0.001; high: providers were "kind, caring, and respectful: weight = 2.46, 95% CI 2.24-2.68;/P/<0.001). Weights were homogeneous across patient subgroups, and there were no significant changes in facilities' quality rankings when weights were used. Both weighted and unweighted scores showed similar evidence of the impact of process measures. There appears to be wide variation in the importance that families place on several aspects of end-of-life care. However, the impact of weighting was generally even across patient subgroups and facilities. Therefore, the use of weights to account for families' priorities is not likely to alter a facility's quality score.

TESPI (Tool for Environmental Sound Product Innovation): a simplified software tool to support environmentally conscious design in SMEs

NASA Astrophysics Data System (ADS)

Misceo, Monica; Buonamici, Roberto; Buttol, Patrizia; Naldesi, Luciano; Grimaldi, Filomena; Rinaldi, Caterina

2004-12-01

TESPI (Tool for Environmental Sound Product Innovation) is the prototype of a software tool developed within the framework of the "eLCA" project. The project, (www.elca.enea.it)financed by the European Commission, is realising "On line green tools and services for Small and Medium sized Enterprises (SMEs)". The implementation by SMEs of environmental product innovation (as fostered by the European Integrated Product Policy, IPP) needs specific adaptation to their economic model, their knowledge of production and management processes and their relationships with innovation and the environment. In particular, quality and costs are the main driving forces of innovation in European SMEs, and well known barriers exist to the adoption of an environmental approach in the product design. Starting from these considerations, the TESPI tool has been developed to support the first steps of product design taking into account both the quality and the environment. Two main issues have been considered: (i) classic Quality Function Deployment (QFD) can hardly be proposed to SMEs; (ii) the environmental aspects of the product life cycle need to be integrated with the quality approach. TESPI is a user friendly web-based tool, has a training approach and applies to modular products. Users are guided through the investigation of the quality aspects of their product (customer"s needs and requirements fulfilment) and the identification of the key environmental aspects in the product"s life cycle. A simplified check list allows analyzing the environmental performance of the product. Help is available for a better understanding of the analysis criteria. As a result, the significant aspects for the redesign of the product are identified.

Single-Phase Single-Stage Grid Tied Solar PV System with Active Power Filtering Using Power Balance Theory

NASA Astrophysics Data System (ADS)

Singh, Yashi; Hussain, Ikhlaq; Singh, Bhim; Mishra, Sukumar

2018-06-01

In this paper, power quality features such as harmonics mitigation, power factor correction with active power filtering are addressed in a single-stage, single-phase solar photovoltaic (PV) grid tied system. The Power Balance Theory (PBT) with perturb and observe based maximum power point tracking algorithm is proposed for the mitigation of power quality problems in a solar PV grid tied system. The solar PV array is interfaced to a single phase AC grid through a Voltage Source Converter (VSC), which provides active power flow from a solar PV array to the grid as well as to the load and it performs harmonics mitigation using PBT based control. The solar PV array power varies with sunlight and due to this, the solar PV grid tied VSC works only 8-10 h per day. At night, when PV power is zero, the VSC works as an active power filter for power quality improvement, and the load active power is delivered by the grid to the load connected at the point of common coupling. This increases the effective utilization of a VSC. The system is modelled and simulated using MATLAB and simulated responses of the system at nonlinear loads and varying environmental conditions are also validated experimentally on a prototype developed in the laboratory.

Single-Phase Single-Stage Grid Tied Solar PV System with Active Power Filtering Using Power Balance Theory

NASA Astrophysics Data System (ADS)

Singh, Yashi; Hussain, Ikhlaq; Singh, Bhim; Mishra, Sukumar

2018-03-01

In this paper, power quality features such as harmonics mitigation, power factor correction with active power filtering are addressed in a single-stage, single-phase solar photovoltaic (PV) grid tied system. The Power Balance Theory (PBT) with perturb and observe based maximum power point tracking algorithm is proposed for the mitigation of power quality problems in a solar PV grid tied system. The solar PV array is interfaced to a single phase AC grid through a Voltage Source Converter (VSC), which provides active power flow from a solar PV array to the grid as well as to the load and it performs harmonics mitigation using PBT based control. The solar PV array power varies with sunlight and due to this, the solar PV grid tied VSC works only 8-10 h per day. At night, when PV power is zero, the VSC works as an active power filter for power quality improvement, and the load active power is delivered by the grid to the load connected at the point of common coupling. This increases the effective utilization of a VSC. The system is modelled and simulated using MATLAB and simulated responses of the system at nonlinear loads and varying environmental conditions are also validated experimentally on a prototype developed in the laboratory.

Creative Digital Industries. A Subject-Based Aspect Report on Provision in Scotland's Colleges by HM Inspectors on Behalf of the Scottish Funding Council

ERIC Educational Resources Information Center

Her Majesty's Inspectorate of Education, 2009

2009-01-01

The HMIE publication, "External quality arrangements for Scotland's colleges," specifies that HMIE will produce a number of subject aspect reports over the four years 2008-12. These aspect reports complement in a subject-specific context the generic evaluations of learning and teaching in HMIE's reports of external review of colleges.…

Environmental permitting in Thailand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Byers, A.C.

Thailand's 1992 enhancement and Conservation of Environmental Quality Act and regulations require any entry proposing to construct a thermal power plant with a capacity greater that 10 MW to perform various environmental studies and prepare an environmental Impact Assessment (EIA) report in accordance with the guidelines issued by the office of Environmental Policy and Planning (OEPP). Approval of the EIA is a prerequisite to the issuance of most other construction permits. Applicable environmental standards and regulation are promulgated by the Pollution Control Department (PCD), a wholly separate agency for the OEPP. The PCD is a fairly new organization and, asmore » a result, their staff is still gaining understanding of the multiple environmental aspects of power generation. Accordingly, the PCD is still in process of drafting key regulations applicable to the power industry. This paper examines the current guidelines, practices, procedures and legal requirements regarding environmental licensing of a thermal power plant in Thailand. The requisite scope and content of the EIA report will be identified, as well as the current procedure for its official review and approval by the OEPP. The paper will address the challenges of working with local consultants and identify potential pitfalls in the report preparation process. Areas of particular interest in the EIA review will be identified based on recent examples of OEPP comments on previous SPP and IPP projects. Additionally, the development of applicable environmental standards by the PCD will be identified along with their plans for implementing these standards. The paper will also examine the relationship of the OEPP and PCD, and reflect upon trends for environmental regulation in Thailand in the near future.« less

Controllable Grid Interface | Grid Modernization | NREL

Science.gov Websites

groundbreaking apparatus for testing and demonstrating advanced controls for wind and solar power generation at requirements. These requirements involve various aspects of renewable power plant operation, including fault respond directly to grid conditions measured on plant terminals, including: "Nasty" and "

Importance of quality aspects of GP care among ethnic minorities: role of cultural attitudes, language and healthcare system of reference.

PubMed

Lamkaddem, Majda; Spreeuwenberg, Peter M; Devillé, Walter L; Foets, Marleen M; Groenewegen, Peter P

2012-02-01

This study examines the mechanisms responsible for ethnic differences in perceived quality of care in The Netherlands. The specific role of cultural attitudes, language proficiency, and the health system in the country of origin was examined, taking socio-demographic characteristics into account. Interview data of 1339 respondents of Moroccan, Turkish, Surinamese and Antillean origin were combined with interview data of Dutch respondents (n = 405) and of Western immigrants (n = 102) in The Netherlands and of a random sample of Dutch privately or publicly insured persons (n = 9675). Data collection took place within the Second Dutch National Survey of General Practice (DNSGP-2, 2001). Items from the QUality Of care Through the patient's Eyes (QUOTE) questionnaire were used to measure expectations, as well as items from the QUOTE-Mi (adapted version for migrant groups). Items on normative orientations were used to measure cultural attitudes. In contrast to our hypothesis, respondents with more egalitarian/modern attitudes attached less importance to quality aspects related to access and quality. Tests on the role of the health system of reference were generally conclusive, showing that respondents accustomed to (parts of) another system have different expectations regarding several aspects of general practitioner healthcare quality, e.g. access to specialist care. Besides socio-demographic characteristics, culture influences patients' expectations regarding general practitioner care quality. However, the role of culture can be more clearly ascribed to the characteristics of the health system which is held as the reference than to the general attitudes on normative orientations.

Power and the Association with Relationship Quality in South African Couples: Implications for HIV/AIDS Interventions

PubMed Central

Conroy, Amy A.; McGrath, Nuala; van Rooyen, Heidi; Hosegood, Victoria; Johnson, Mallory O.; Fritz, Katherine; Marr, Alexander; Ngubane, Thulani; Darbes, Lynae A.

2016-01-01

Introduction Power imbalances within sexual relationships have significant implications for HIV prevention in sub-Saharan Africa. Little is known about how power influences the quality of a relationship, which could be an important pathway leading to healthy behavior around HIV/AIDS. Methods This paper uses data from 448 heterosexual couples (896 individuals) in rural KwaZulu-Natal, South Africa who completed baseline surveys from 2012–2014 as part of a couples-based HIV intervention trial. Using an actor-partner interdependence perspective, we assessed: (1) how both partners’ perceptions of power influences their own (i.e., actor effect) and their partner’s reports of relationship quality (i.e., partner effect); and (2) whether these associations differed by gender. We examined three constructs related to power (female power, male equitable gender norms, and shared power) and four domains of relationship quality (intimacy, trust, mutually constructive communication, and conflict). Results For actor effects, shared power was strongly and consistently associated with higher relationship quality across all four domains. The effect of shared power on trust, mutually constructive communication, and conflict were stronger for men than women. The findings for female power and male equitable gender norms were more mixed. Female power was positively associated with women’s reports of trust and mutually constructive communication, but negatively associated with intimacy. Male equitable gender norms were positively associated with men’s reports of mutually constructive communication. For partner effects, male equitable gender norms were positively associated with women’s reports of intimacy and negatively associated with women’s reports of conflict. Conclusions Research and health interventions aiming to improving HIV-related behaviors should consider sources of shared power within couples and potential leverage points for empowerment at the couple level. Efforts solely focused on empowering women should also take the dyadic environment and men’s perspectives into account to ensure positive relationship outcomes. PMID:26859436

Power and the association with relationship quality in South African couples: Implications for HIV/AIDS interventions.

PubMed

Conroy, Amy A; McGrath, Nuala; van Rooyen, Heidi; Hosegood, Victoria; Johnson, Mallory O; Fritz, Katherine; Marr, Alexander; Ngubane, Thulani; Darbes, Lynae A

2016-03-01

Power imbalances within sexual relationships have significant implications for HIV prevention in sub-Saharan Africa. Little is known about how power influences the quality of a relationship, which could be an important pathway leading to healthy behavior around HIV/AIDS. This paper uses data from 448 heterosexual couples (896 individuals) in rural KwaZulu-Natal, South Africa who completed baseline surveys from 2012 to 2014 as part of a couples-based HIV intervention trial. Using an actor-partner interdependence perspective, we assessed: (1) how both partners' perceptions of power influences their own (i.e., actor effect) and their partner's reports of relationship quality (i.e., partner effect); and (2) whether these associations differed by gender. We examined three constructs related to power (female power, male equitable gender norms, and shared power) and four domains of relationship quality (intimacy, trust, mutually constructive communication, and conflict). For actor effects, shared power was strongly and consistently associated with higher relationship quality across all four domains. The effect of shared power on trust, mutually constructive communication, and conflict were stronger for men than women. The findings for female power and male equitable gender norms were more mixed. Female power was positively associated with women's reports of trust and mutually constructive communication, but negatively associated with intimacy. Male equitable gender norms were positively associated with men's reports of mutually constructive communication. For partner effects, male equitable gender norms were positively associated with women's reports of intimacy and negatively associated with women's reports of conflict. Research and health interventions aiming to improving HIV-related behaviors should consider sources of shared power within couples and potential leverage points for empowerment at the couple level. Efforts solely focused on empowering women should also take the dyadic environment and men's perspectives into account to ensure positive relationship outcomes. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Improvement of nuclear power plants within the perspective of applications of lean manufacturing practices

NASA Astrophysics Data System (ADS)

Malek, A. K.; Muhammad, H. I.; Rosmaini, A.; Alaa, A. S.; Falah, A. M.

2017-09-01

Development and improvement process are essential to the companies and factories of various kinds and this necessity is related aspects of cost, time and risk that can be avoided, these aspects are available at the nuclear power stations essential demands cannot be ignored. The lean management technique is one of the recent trends in the management system. Where the lean management is stated as the system increases the customer value and reduces the wastage process in an industry or in a power plants. Therefore, there is an urgent necessity to ensure the development and improvement in nuclear power plants in the pre-established in process of being established and stage of the management and production. All of these stages according to the study are closely related to the necessity operationalize and apply lean manufacturing practices that these applications are ineffective and clear contribution to reduce costs and control of production processes and the process of reducing future risks that could be exposed to the station.

The N-Pact Factor: Evaluating the Quality of Empirical Journals with Respect to Sample Size and Statistical Power

PubMed Central

Fraley, R. Chris; Vazire, Simine

2014-01-01

The authors evaluate the quality of research reported in major journals in social-personality psychology by ranking those journals with respect to their N-pact Factors (NF)—the statistical power of the empirical studies they publish to detect typical effect sizes. Power is a particularly important attribute for evaluating research quality because, relative to studies that have low power, studies that have high power are more likely to (a) to provide accurate estimates of effects, (b) to produce literatures with low false positive rates, and (c) to lead to replicable findings. The authors show that the average sample size in social-personality research is 104 and that the power to detect the typical effect size in the field is approximately 50%. Moreover, they show that there is considerable variation among journals in sample sizes and power of the studies they publish, with some journals consistently publishing higher power studies than others. The authors hope that these rankings will be of use to authors who are choosing where to submit their best work, provide hiring and promotion committees with a superior way of quantifying journal quality, and encourage competition among journals to improve their NF rankings. PMID:25296159

Restructuring the energy industry: A financial perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abrams, W.A.

1995-12-31

This paper present eight tables summarizing financial aspects of energy industry restructuring. Historical, current, and future business characteristics of energy industries are outlined. Projections of industry characteristics are listed for the next five years and for the 21st century. Future independent power procedures related to financial aspects are also outlined. 8 tabs.

Making Sense of Stewardship: Metaphorical Thinking and the Environment

ERIC Educational Resources Information Center

Foster, John

2005-01-01

This paper sketches the fundamental characteristics of metaphorical language which enable it to subserve not only the shaping of particular discourses, but also crucial aspects of our powers of enquiry and understanding. It argues that without metaphorical creativity we cannot make adequate sense of the more complex and open-ended aspects of our…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galambos, John D.; Anderson, David E.; Bechtol, D.

The Second Target Station (STS) is a proposed upgrade for SNS. It includes a doubling of the accelerator power and an additional instrument hall. The new instrument hall will receive a 467 kW 10 Hz beam. The parameters and preliminary design aspects of the STS are presented for the accelerator, target systems, instrument hall, instruments and civil construction aspects.

Slip-Sliding-Away: A Review of the Literature on the Constraining Qualities of PowerPoint

ERIC Educational Resources Information Center

Kernbach, Sebastian; Bresciani, Sabrina; Eppler, Martin J.

2015-01-01

PowerPoint is a dominant communication tool in business and education. It allows for creating professional-looking presentations easily, but without understanding its constraining qualities it can be used inappropriately. Therefore we conducted a systematic literature review structuring the literature on PowerPoint in three chronological phases…

Muscle power is an independent determinant of pain and quality of life in knee osteoarthritis

USDA-ARS?s Scientific Manuscript database

OBJECTIVE: This study examined the relationships between leg muscle strength, power, and perceived disease severity in subjects with knee osteoarthritis (OA) in order to determine whether dynamic leg extensor muscle power would be associated with pain and quality of life in knee OA. METHODS: Baseli...

43 CFR 45.71 - How do I propose an alternative?

Code of Federal Regulations, 2010 CFR

2010-10-01

... works for electricity production; (4) An explanation of how the alternative will affect: (i) Energy... quality; and (vi) Other aspects of environmental quality; and (5) Specific citations to any scientific...

Predicting protein function and other biomedical characteristics with heterogeneous ensembles

PubMed Central

Whalen, Sean; Pandey, Om Prakash

2015-01-01

Prediction problems in biomedical sciences, including protein function prediction (PFP), are generally quite difficult. This is due in part to incomplete knowledge of the cellular phenomenon of interest, the appropriateness and data quality of the variables and measurements used for prediction, as well as a lack of consensus regarding the ideal predictor for specific problems. In such scenarios, a powerful approach to improving prediction performance is to construct heterogeneous ensemble predictors that combine the output of diverse individual predictors that capture complementary aspects of the problems and/or datasets. In this paper, we demonstrate the potential of such heterogeneous ensembles, derived from stacking and ensemble selection methods, for addressing PFP and other similar biomedical prediction problems. Deeper analysis of these results shows that the superior predictive ability of these methods, especially stacking, can be attributed to their attention to the following aspects of the ensemble learning process: (i) better balance of diversity and performance, (ii) more effective calibration of outputs and (iii) more robust incorporation of additional base predictors. Finally, to make the effective application of heterogeneous ensembles to large complex datasets (big data) feasible, we present DataSink, a distributed ensemble learning framework, and demonstrate its sound scalability using the examined datasets. DataSink is publicly available from https://github.com/shwhalen/datasink. PMID:26342255

Identifying and analyzing the construction and effectiveness of offensive plays in basketball by using systematic observation.

PubMed

Fernandez, Jordi; Camerino, Oleguer; Anguera, M Teresa; Jonsson, Gudberg K

2009-08-01

In the field of sports research, there is a growing need for the rigorous collection of data that provide empirical evidence about the complex reality they refer to. Although sports psychology research has advanced considerably in recent years, in both extent and quality, one area of research that remains relatively unexplored is the dynamics of the sports group and the influence of the group on its members (George & Feltz, 1995; Widmeyer, Brawley, & Carron, 1992). Key aspects in this regard include the presence of regularities that are not detectable through visual inference or traditional methods of data analysis, the lack of standard observation instruments, and, assuming priority, the need to develop powerful, computerized coding systems, all of which must form part of an approach that is suitable for natural and habitual contexts. The present study is part of a broader research project concerning ACB teams (first Spanish basketball division) and considers the interaction context before teams try to score (where this is understood as how teams create scoring opportunities) as the core aspect that links team play. This investigation proposes a new model of analysis for studying the effectiveness and construction of offensive basketball plays in order to identify their outcomes, thus providing coaches with an important device for improving or consolidating them.

[Quality of life - methodology and clinical practice aspects with a focus on ocular medicine].

PubMed

Franke, G H; Gall, C

2008-08-01

Due to the demographic development in western industrialised countries, the proportion of visually impaired persons is likely to increase in the future. Currently there is a shift in scientific recognition from relative neglect of psychopathological distress in the visually impaired to better notice of disease-related subjective impairments that are detectable with specific questionnaire measures. Visual acuity primarily determines the subjective rating of visual functioning independent from the eye disease. Ophthalmic patients who show only mild symptoms from a medical point of view normally suffer considerably diminished vision-related quality of life with respect to physical, functional, mental, and social aspects. Treatment effects have been shown using vision-related quality-of-life measures for different ophthalmic diseases, particularly cataract surgery. Assessment of vision-related quality of life provides a meaningful complement to objective data.

The uses and implications of standards in general practice consultations.

PubMed

Lippert, Maria Laura; Reventlow, Susanne; Kousgaard, Marius Brostrøm

2017-01-01

Quality standards play an increasingly important role in primary care through their inscription in various technologies for improving professional practice. While 'hard' biomedical standards have been the most common and debated, current quality development initiatives increasingly seek to include standards for the 'softer' aspects of care. This article explores the consequences of both kinds of quality standards for chronic care consultations. The article presents findings from an explorative qualitative field study in Danish general practice where a standardized technology for quality development has been introduced. Data from semi-structured interviews and observations among 17 general practitioners were analysed using an iterative analytical approach, which served to identify important variations in the uses and impacts of the technology. The most pronounced impact of the technology was observed among general practitioners who strictly adhered to the procedural standards on the interactional aspects of care. Thus, when allowed to function as an overall frame for consultations, those standards supported adherence to general recommendations regarding which elements to be included in chronic disease consultations. However, at the same time, adherence to those standards was observed to narrow the focus of doctor-patient dialogues and to divert general practitioners' attention from patients' personal concerns. Similar consequences of quality standards have previously been framed as manifestations of an inherent conflict between principles of patient-centredness and formal biomedical quality standards. However, this study suggests that standards on the 'softer' aspects of care may just as well interfere with a clinical approach relying on situated and attentive interactions with patients.

Communication and complexity in a GRN-based multicellular system for graph colouring.

PubMed

Buck, Moritz; Nehaniv, Chrystopher L

2008-01-01

Artificial Genetic Regulatory Networks (GRNs) are interesting control models through their simplicity and versatility. They can be easily implemented, evolved and modified, and their similarity to their biological counterparts makes them interesting for simulations of life-like systems as well. These aspects suggest they may be perfect control systems for distributed computing in diverse situations, but to be usable for such applications the computational power and evolvability of GRNs need to be studied. In this research we propose a simple distributed system implementing GRNs to solve the well known NP-complete graph colouring problem. Every node (cell) of the graph to be coloured is controlled by an instance of the same GRN. All the cells communicate directly with their immediate neighbours in the graph so as to set up a good colouring. The quality of this colouring directs the evolution of the GRNs using a genetic algorithm. We then observe the quality of the colouring for two different graphs according to different communication protocols and the number of different proteins in the cell (a measure for the possible complexity of a GRN). Those two points, being the main scalability issues that any computational paradigm raises, will then be discussed.

Training Patient and Family Storytellers and Patient and Family Faculty

PubMed Central

Morrise, Lisa; Stevens, Katy Jo

2013-01-01

Narrative medicine has become a prominent method of developing more empathetic relationships between medical clinicians and patients, on the basis of a deeper understanding of the patient experience. Beyond its usefulness during clinical encounters, patient storytelling can inform processes and procedures in Advisory Councils, Committee Meetings, and Family as Faculty settings, leading to improved quality and safety in health care. Armed with a better understanding of the patient experience, clinicians and administrators can make decisions, hopefully in collaboration with patients, that will enrich the patient experience and increase satisfaction among patients, families, and staff. Patient and family storytelling is a key component of the collaboration that is ideal when an organization seeks to deliver patient- and family-centered care. Providing patients and families with training will make the narratives they share more powerful. Health care organizations will find that purposeful storytelling can be an invaluable aspect of a patient- and family-centered culture. Well-delivered storytelling will support quality- and safety-improvement efforts and contribute to improved patient satisfaction. This article provides instruction for teaching patients and families how to tell stories with purpose and offers advice about how to support patients, families, and clinicians participating in this effort. PMID:24355906

Some aspects of analytical chemistry as applied to water quality assurance techniques for reclaimed water: The potential use of X-ray fluorescence spectrometry for automated on-line fast real-time simultaneous multi-component analysis of inorganic pollutants in reclaimed water

NASA Technical Reports Server (NTRS)

Ling, A. C.; Macpherson, L. H.; Rey, M.

1981-01-01

The potential use of isotopically excited energy dispersive X-ray fluorescence (XRF) spectrometry for automated on line fast real time (5 to 15 minutes) simultaneous multicomponent (up to 20) trace (1 to 10 parts per billion) analysis of inorganic pollutants in reclaimed water was examined. Three anionic elements (chromium 6, arsenic and selenium) were studied. The inherent lack of sensitivity of XRF spectrometry for these elements mandates use of a preconcentration technique and various methods were examined, including: several direct and indirect evaporation methods; ion exchange membranes; selective and nonselective precipitation; and complexation processes. It is shown tha XRF spectrometry itself is well suited for automated on line quality assurance, and can provide a nondestructive (and thus sample storage and repeat analysis capabilities) and particularly convenient analytical method. Further, the use of an isotopically excited energy dispersive unit (50 mCi Cd-109 source) coupled with a suitable preconcentration process can provide sufficient sensitivity to achieve the current mandated minimum levels of detection without the need for high power X-ray generating tubes.

Adaptive wall technology for minimization of wall interferences in transonic wind tunnels

NASA Technical Reports Server (NTRS)

Wolf, Stephen W. D.

1988-01-01

Modern experimental techniques to improve free air simulations in transonic wind tunnels by use of adaptive wall technology are reviewed. Considered are the significant advantages of adaptive wall testing techniques with respect to wall interferences, Reynolds number, tunnel drive power, and flow quality. The application of these testing techniques relies on making the test section boundaries adjustable and using a rapid wall adjustment procedure. A historical overview shows how the disjointed development of these testing techniques, since 1938, is closely linked to available computer support. An overview of Adaptive Wall Test Section (AWTS) designs shows a preference for use of relatively simple designs with solid adaptive walls in 2- and 3-D testing. Operational aspects of AWTS's are discussed with regard to production type operation where adaptive wall adjustments need to be quick. Both 2- and 3-D data are presented to illustrate the quality of AWTS data over the transonic speed range. Adaptive wall technology is available for general use in 2-D testing, even in cryogenic wind tunnels. In 3-D testing, more refinement of the adaptive wall testing techniques is required before more widespread use can be planned.

Validation of quality indicators for the organization of palliative care: a modified RAND Delphi study in seven European countries (the Europall project).

PubMed

Woitha, Kathrin; Van Beek, Karen; Ahmed, Nisar; Jaspers, Birgit; Mollard, Jean M; Ahmedzai, Sam H; Hasselaar, Jeroen; Menten, Johan; Vissers, Kris; Engels, Yvonne

2014-02-01

Validated quality indicators can help health-care professionals to evaluate their medical practices in a comparative manner to deliver optimal clinical care. No international set of quality indicators to measure the organizational aspects of palliative care settings exists. To develop and validate a set of structure and process indicators for palliative care settings in Europe. A two-round modified RAND Delphi process was conducted to rate clarity and usefulness of a previously developed set of 110 quality indicators. In total, 20 multi-professional palliative care teams of centers of excellence from seven European countries. In total, 56 quality indicators were rated as useful. These valid quality indicators concerned the following domains: the definition of a palliative care service (2 quality indicators), accessibility to palliative care (16 quality indicators), specific infrastructure to deliver palliative care (8 quality indicators), symptom assessment tools (1 quality indicator), specific personnel in palliative care services (9 quality indicators), documentation methodology of clinical data (14 quality indicators), evaluation of quality and safety procedures (1 quality indicator), reporting of clinical activities (1 quality indicator), and education in palliative care (4 quality indicator). The modified RAND Delphi process resulted in 56 international face-validated quality indicators to measure and compare organizational aspects of palliative care. These quality indicators, aimed to assess and improve the organization of palliative care, will be pilot tested in palliative care settings all over Europe and be used in the EU FP7 funded IMPACT project.

Reliability Criteria for Thick Bonding Wire.

PubMed

Dagdelen, Turker; Abdel-Rahman, Eihab; Yavuz, Mustafa

2018-04-17

Bonding wire is one of the main interconnection techniques. Thick bonding wire is widely used in power modules and other high power applications. This study examined the case for extending the use of traditional thin wire reliability criteria, namely wire flexure and aspect ratio, to thick wires. Eleven aluminum (Al) and aluminum coated copper (CucorAl) wire samples with diameter 300 μm were tested experimentally. The wire response was measured using a novel non-contact method. High fidelity FEM models of the wire were developed and validated. We found that wire flexure is not correlated to its stress state or fatigue life. On the other hand, aspect ratio is a consistent criterion of thick wire fatigue life. Increasing the wire aspect ratio lowers its critical stress and increases its fatigue life. Moreover, we found that CucorAl wire has superior performance and longer fatigue life than Al wire.

Reliability Criteria for Thick Bonding Wire

PubMed Central

Yavuz, Mustafa

2018-01-01

Bonding wire is one of the main interconnection techniques. Thick bonding wire is widely used in power modules and other high power applications. This study examined the case for extending the use of traditional thin wire reliability criteria, namely wire flexure and aspect ratio, to thick wires. Eleven aluminum (Al) and aluminum coated copper (CucorAl) wire samples with diameter 300 μm were tested experimentally. The wire response was measured using a novel non-contact method. High fidelity FEM models of the wire were developed and validated. We found that wire flexure is not correlated to its stress state or fatigue life. On the other hand, aspect ratio is a consistent criterion of thick wire fatigue life. Increasing the wire aspect ratio lowers its critical stress and increases its fatigue life. Moreover, we found that CucorAl wire has superior performance and longer fatigue life than Al wire. PMID:29673194

High β produced by neutral beam injection in the START (Small Tight Aspect Ratio Tokamak) spherical tokamak

NASA Astrophysics Data System (ADS)

Sykes, Alan

1997-05-01

The world's first high-power auxiliary heating experiments in a tight aspect ratio (or spherical) tokamak have been performed on the Small Tight Aspect Ratio Tokomak (START) device [Sykes et al., Nucl. Fusion 32, 694 (1992)] at Culham Laboratory, using the 40 keV, 0.5 MW Neutral Beam Injector loaned by the Oak Ridge National Laboratory. Injection has been mainly of hydrogen into hydrogen or deuterium target plasmas, with a one-day campaign to explore D→D operation. In each case injection provides a combination of higher density operation and effective heating of both ions and electrons. The highest β values achieved to date in START are volume average βT˜11.5% and central beta βO˜50%. Already high, these values are expected to increase further with the use of higher beam power.

The power grid monitoring promotion of Liaoning December 14th accident

NASA Astrophysics Data System (ADS)

Zhou, Zhi; Gao, Ziji; He, Xiaoyang; Li, Tie; Jin, Xiaoming; Wang, Mingkai; Qu, Zhi; Sun, Chenguang

2018-02-01

This paper introduces the main responsibilities of power grid monitoring and the accident of Liaoning Power Grid 500kV Xujia transformer substation at December 14th, 2016. This paper analyzes the problems exposed in this accident from the aspects of abnormal information judgment, fault information collection, auxiliary video monitoring, online monitoring of substation equipment, puts forward the corresponding improvement methods and summarizes the methods of improving the professional level of power grid equipment monitoring.

Aerodynamics power consumption for mechanical flapping wings undergoing flapping and pitching motion

NASA Astrophysics Data System (ADS)

Razak, N. A.; Dimitriadis, G.; Razaami, A. F.

2017-07-01

Lately, due to the growing interest in Micro Aerial Vehicles (MAV), interest in flapping flight has been rekindled. The reason lies in the improved performance of flapping wing flight at low Reynolds number regime. Many studies involving flapping wing flight focused on the generation of unsteady aerodynamic forces such as lift and thrust. There is one aspect of flapping wing flight that received less attention. The aspect is aerodynamic power consumption. Since most mechanical flapping wing aircraft ever designed are battery powered, power consumption is fundamental in improving flight endurance. This paper reports the results of experiments carried out on mechanical wings under going active root flapping and pitching in the wind tunnel. The objective of the work is to investigate the effect of the pitch angle oscillations and wing profile on the power consumption of flapping wings via generation of unsteady aerodynamic forces. The experiments were repeated for different airspeeds, flapping and pitching kinematics, geometric angle of attack and wing sections with symmetric and cambered airfoils. A specially designed mechanical flapper modelled on large migrating birds was used. It will be shown that, under pitch leading conditions, less power is required to overcome the unsteady aerodnamics forces. The study finds less power requirement for downstroke compared to upstroke motion. Overall results demonstrate power consumption depends directly on the unsteady lift force.

Assessment of Teaching Quality: Survey of University Graduates

ERIC Educational Resources Information Center

Stankeviciene, Jurate

2007-01-01

Purpose: The purpose was to investigate higher education quality because there are links between the main society and university graduates and the university. Methodology: This research sought aspects of the teaching quality of the Faculty that could be improved. The spheres were: improvement in qualifications of the teachers; finding ways to…

Aspects of Quality in Greek Day Care Centres.

ERIC Educational Resources Information Center

Melhuish, Edward C.; Petrogiannis, Konstantinos

1996-01-01

Evaluates the quality of the caregiving environment for young infants in day care centers in Athens (Greece) using three global measures: ITERS, PROFILE, and CCFS. Reveals a great similarity among the three measures. Reports a generally low quality for day care, lower than for other countries with similar research. (DSK)

How to conduct a clinical audit and quality improvement project.

PubMed

Limb, Christopher; Fowler, Alex; Gundogan, Buket; Koshy, Kiron; Agha, Riaz

2017-07-01

Audits and quality improvement projects are vital aspects of clinical governance and continual service improvement in medicine. In this article we describe the process of clinical audit and quality improvement project. Guidance is also provided on how to design an effective audit and bypass barriers encountered during the process.

Health, Quality of Life and Population Density: A Preliminary Study on "Contextualized" Quality of Life

ERIC Educational Resources Information Center

Fassio, Omar; Rollero, Chiara; De Piccoli, Norma

2013-01-01

Quality of life concerns individual (physical and psychological health), interpersonal (social relationships) and contextual (environment) aspects, which are both subjective and objective. In considering contextual characteristics, empirical findings have demonstrated that people's relation to their living environment is a key issue for their…

The Total Quality Initiative at South Bank University.

ERIC Educational Resources Information Center

Geddes, Tommy

1993-01-01

Application of the Total Quality Management approach to one aspect of the administration of South Bank University (England), the relationship between student as customer and university as supplier, is described. The technique includes development of service quality standards and agreements for each service, support, and academic department. (MSE)

WETLANDS AND WATER QUALITY TRADING: REVIEW OF CURRENT SCIENCE AND ECONOMIC PRACTICES WITH SELECTED CASE STUDIES

EPA Science Inventory

The study evaluates the technical, economic, and administrative aspects of establishing water quality trading (WQT) programs where the nutrient removal capacity of wetlands is used to improve water quality. WQT is a potentially viable approach for wastewater dischargers to cost-e...

75 FR 19948 - Notice of Intent To Prepare an Environmental Impact Statement for the Missouri River Authorized...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

..., recreation, water quality, and water supply. Public scoping for the MRAPS will begin in late May 2010. Future..., irrigation, navigation, power, recreation, water quality, and water supply. Section 108 of the Energy and... and wildlife, irrigation, power, recreation, water supply, and water quality control; defining the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Widergren, Steven E.; Knight, Mark R.; Melton, Ronald B.

The Interoperability Strategic Vision whitepaper aims to promote a common understanding of the meaning and characteristics of interoperability and to provide a strategy to advance the state of interoperability as applied to integration challenges facing grid modernization. This includes addressing the quality of integrating devices and systems and the discipline to improve the process of successfully integrating these components as business models and information technology improve over time. The strategic vision for interoperability described in this document applies throughout the electric energy generation, delivery, and end-use supply chain. Its scope includes interactive technologies and business processes from bulk energy levelsmore » to lower voltage level equipment and the millions of appliances that are becoming equipped with processing power and communication interfaces. A transformational aspect of a vision for interoperability in the future electric system is the coordinated operation of intelligent devices and systems at the edges of grid infrastructure. This challenge offers an example for addressing interoperability concerns throughout the electric system.« less

Write-Read 3D Patterning with a Dual-Channel Nanopipette.

PubMed

Momotenko, Dmitry; Page, Ashley; Adobes-Vidal, Maria; Unwin, Patrick R

2016-09-27

Nanopipettes are becoming extremely versatile and powerful tools in nanoscience for a wide variety of applications from imaging to nanoscale sensing. Herein, the capabilities of nanopipettes to build complex free-standing three-dimensional (3D) nanostructures are demonstrated using a simple double-barrel nanopipette device. Electrochemical control of ionic fluxes enables highly localized delivery of precursor species from one channel and simultaneous (dynamic and responsive) ion conductance probe-to-substrate distance feedback with the other for reliable high-quality patterning. Nanopipettes with 30-50 nm tip opening dimensions of each channel allowed confinement of ionic fluxes for the fabrication of high aspect ratio copper pillar, zigzag, and Γ-like structures, as well as permitted the subsequent topographical mapping of the patterned features with the same nanopipette probe as used for nanostructure engineering. This approach offers versatility and robustness for high-resolution 3D "printing" (writing) and read-out at the nanoscale.

Neural Correlates of Boredom in Music Perception

PubMed Central

Fakhr Tabatabaie, Ashkan; Azadehfar, Mohammad Reza; Mirian, Negin; Noroozian, Maryam; Yoonessi, Ahmad; Saebipour, Mohammad Reza; Yoonessi, Ali

2014-01-01

Introduction: Music can elicit powerful emotional responses, the neural correlates of which have not been properly understood. An important aspect about the quality of any musical piece is its ability to elicit a sense of excitement in the listeners. In this study, we investigated the neural correlates of boredom evoked by music in human subjects. Methods: We used EEG recording in nine subjects while they were listening to total number of 10 short-length (83 sec) musical pieces with various boredom indices. Subjects evaluated boringness of musical pieces while their EEG was recording. Results: Using short time Fourier analysis, we found that beta 2 rhythm was (16–20 Hz) significantly lower whenever the subjects rated the music as boring in comparison to non-boring. Discussion: The results demonstrate that the music modulates neural activity of various parts of the brain and can be measured using EEG. PMID:27284390

The selected reaction monitoring/multiple reaction monitoring-based mass spectrometry approach for the accurate quantitation of proteins: clinical applications in the cardiovascular diseases.

PubMed

Gianazza, Erica; Tremoli, Elena; Banfi, Cristina

2014-12-01

Selected reaction monitoring, also known as multiple reaction monitoring, is a powerful targeted mass spectrometry approach for a confident quantitation of proteins/peptides in complex biological samples. In recent years, its optimization and application have become pivotal and of great interest in clinical research to derive useful outcomes for patient care. Thus, selected reaction monitoring/multiple reaction monitoring is now used as a highly sensitive and selective method for the evaluation of protein abundances and biomarker verification with potential applications in medical screening. This review describes technical aspects for the development of a robust multiplex assay and discussing its recent applications in cardiovascular proteomics: verification of promising disease candidates to select only the highest quality peptides/proteins for a preclinical validation, as well as quantitation of protein isoforms and post-translational modifications.

Unstructured viscous grid generation by advancing-front method

NASA Technical Reports Server (NTRS)

Pirzadeh, Shahyar

1993-01-01

A new method of generating unstructured triangular/tetrahedral grids with high-aspect-ratio cells is proposed. The method is based on new grid-marching strategy referred to as 'advancing-layers' for construction of highly stretched cells in the boundary layer and the conventional advancing-front technique for generation of regular, equilateral cells in the inviscid-flow region. Unlike the existing semi-structured viscous grid generation techniques, the new procedure relies on a totally unstructured advancing-front grid strategy resulting in a substantially enhanced grid flexibility and efficiency. The method is conceptually simple but powerful, capable of producing high quality viscous grids for complex configurations with ease. A number of two-dimensional, triangular grids are presented to demonstrate the methodology. The basic elements of the method, however, have been primarily designed with three-dimensional problems in mind, making it extendible for tetrahedral, viscous grid generation.

Body worn camera

NASA Astrophysics Data System (ADS)

Aishwariya, A.; Pallavi Sudhir, Gulavani; Garg, Nemesa; Karthikeyan, B.

2017-11-01

A body worn camera is small video camera worn on the body, typically used by police officers to record arrests, evidence from crime scenes. It helps preventing and resolving complaints brought by members of the public; and strengthening police transparency, performance, and accountability. The main constants of this type of the system are video format, resolution, frames rate, and audio quality. This system records the video in .mp4 format with 1080p resolution and 30 frames per second. One more important aspect to while designing this system is amount of power the system requires as battery management becomes very critical. The main design challenges are Size of the Video, Audio for the video. Combining both audio and video and saving it in .mp4 format, Battery, size that is required for 8 hours of continuous recording, Security. For prototyping this system is implemented using Raspberry Pi model B.

Technical Analysis Feasibility Study on Smart Microgrid System in Sekolah Tinggi Teknik PLN

NASA Astrophysics Data System (ADS)

Suyanto, Heri

2018-02-01

Nowadays application of new and renewable energy as main resource of power plant has greatly increased. High penetration of renewable energy into the grid will influence the quality and reliability of the electricity system, due to the intermittent characteristic of new and renewable energy resources. Smart grid or microgrid technology has the ability to deal with this intermittent characteristic especially if these renewable energy resources integrated to grid in large scale, so it can improve the reliability and efficiency of the grid. We plan to implement smart microgrid system at Sekolah Tinggi Teknik PLN as a pilot project. Before the pilot project start, the feasibility study must be conducted. In this feasibility study, the renewable energy resources and load characteristic at the site will be measured. Then the technical aspect of this feasibility study will be analyzed. This paper explains that analysis of ths feasibility study.

An evaluation of a professional learning network for computer science teachers

NASA Astrophysics Data System (ADS)

Cutts, Quintin; Robertson, Judy; Donaldson, Peter; O'Donnell, Laurie

2017-01-01

This paper describes and evaluates aspects of a professional development programme for existing CS teachers in secondary schools (PLAN C) which was designed to support teachers at a time of substantial curricular change. The paper's particular focus is on the formation of a teacher professional development network across several hundred teachers and a wide geographical area. Evidence from a series of observations and teacher surveys over a two-year period is analysed with respect to the project's programme theory in order to illustrate not only whether it worked as intended, by why. Results indicate that the PLAN C design has been successful in increasing teachers' professional confidence and appears to have catalysed powerful change in attitudes to learning. Presentation of challenging pedagogical content knowledge and conceptual frameworks, high-quality teacher-led professional dialogue, along with the space for reflection and classroom trials, triggered examination of the teachers' own current practices.

Cell separation: Terminology and practical considerations

PubMed Central

Tomlinson, Sophie; Yang, Xuebin B; Kirkham, Jennifer

2013-01-01

Cell separation is a powerful tool in biological research. Increasing usage, particularly within the tissue engineering and regenerative medicine communities, means that researchers from a diverse range of backgrounds are utilising cell separation technologies. This review aims to offer potential solutions to cell sorting problems and to clarify common ambiguities in terminology and experimental design. The frequently used cell separation terms of ‘purity’, ‘recovery’ and ‘viability’ are discussed, and attempts are made to reach a consensus view of their sometimes ambiguous meanings. The importance of appropriate experimental design is considered, with aspects such as marker expression, tissue isolation and original cell population analysis discussed. Finally, specific technical issues such as cell clustering, dead cell removal and non-specific antibody binding are considered and potential solutions offered. The solutions offered may provide a starting point to improve the quality of cell separations achieved by both the novice and experienced researcher alike. PMID:23440031

The Thinnest Path Problem

DTIC Science & Technology

2016-07-22

their corresponding transmission powers . At first glance, one may wonder whether the thinnest path problem is simply a shortest path problem with the...nature of the shortest path problem. Another aspect that complicates the problem is the choice of the transmission power at each node (within a maximum...fixed transmission power at each node (in this case, the resulting hypergraph degenerates to a standard graph), the thinnest path problem is NP

A Compelling Solution to Guantanamo Bay

DTIC Science & Technology

2013-03-01

military commission violated separation of powers because one branch of the government, namely the Executive, controlled all aspects of the case... separation of powers requirement. The conclusion that can be drawn from these legal decisions is that the military system is fundamentally...the Rule of Law and violates the separation of powers .111 The current system has even strained the United States’ relationship with close allies

Solar power R and D for Air Force space requirements

NASA Technical Reports Server (NTRS)

Wise, J. F.

1980-01-01

The requirements for improved solar power system technology for DOD satellites are reported. It is shown that the technology is required in several areas including solar cells, array blanket technology, energy storage and power system operation, and regulation and control. It is further shown that as the missions become more critical to defence, military aspects such as survivability, hardening, and eventually defence must be addressed.

How wide is the gap in defining quality care? Comparison of patient and nurse perceptions of important aspects of patient care.

PubMed

Young, W B; Minnick, A F; Marcantonio, R

1996-05-01

The authors determine the importance that patients, nurses, and nurse managers place on aspects of care and measure nurses' care values based on their perceptions of their patients and nurse manager care values and their desire to meet these care expectations. The literature has documented gaps in how nurses and patients define quality and value specific care aspects, but little is known about the situation in the current continuous quality improvement and patient-centered care environment, which emphasizes a customer focus. Misunderstanding patients' values and expectations may impede service improvement. Information about any existing gaps could help managers begin to devise patient satisfaction improvement strategies. Two thousand fifty-one medical-surgical patients, 1264 staff members, and 97 nurse managers from 17 randomly selected hospitals participated in study activities related to selected aspects of patient care. Trained interviewers surveyed patients by telephone within 26 days of discharge using a pretested instrument. Staff members and managers completed a coordinated written tool. Descriptive and correlational statistics were used in individual and unit-level analyses. Staff members perceive correctly that patients value differently various aspects of care but do not agree with their managers on patients' value of aspects of care. Unit staff members' and managers' beliefs regarding patients' care values did not match those of their patients (-14 to 0.11 and -0.01 to 0.06 zero order correlations, respectively). A unit's errors in defining patients' values may be self-reinforcing. Strategies to reorient personnel, including adoption of those suggested by the diffusion of innovation literature, may help bridge the gap and change practice.

Pitfalls in statistical landslide susceptibility modelling

NASA Astrophysics Data System (ADS)

Schröder, Boris; Vorpahl, Peter; Märker, Michael; Elsenbeer, Helmut

2010-05-01

The use of statistical methods is a well-established approach to predict landslide occurrence probabilities and to assess landslide susceptibility. This is achieved by applying statistical methods relating historical landslide inventories to topographic indices as predictor variables. In our contribution, we compare several new and powerful methods developed in machine learning and well-established in landscape ecology and macroecology for predicting the distribution of shallow landslides in tropical mountain rainforests in southern Ecuador (among others: boosted regression trees, multivariate adaptive regression splines, maximum entropy). Although these methods are powerful, we think it is necessary to follow a basic set of guidelines to avoid some pitfalls regarding data sampling, predictor selection, and model quality assessment, especially if a comparison of different models is contemplated. We therefore suggest to apply a novel toolbox to evaluate approaches to the statistical modelling of landslide susceptibility. Additionally, we propose some methods to open the "black box" as an inherent part of machine learning methods in order to achieve further explanatory insights into preparatory factors that control landslides. Sampling of training data should be guided by hypotheses regarding processes that lead to slope failure taking into account their respective spatial scales. This approach leads to the selection of a set of candidate predictor variables considered on adequate spatial scales. This set should be checked for multicollinearity in order to facilitate model response curve interpretation. Model quality assesses how well a model is able to reproduce independent observations of its response variable. This includes criteria to evaluate different aspects of model performance, i.e. model discrimination, model calibration, and model refinement. In order to assess a possible violation of the assumption of independency in the training samples or a possible lack of explanatory information in the chosen set of predictor variables, the model residuals need to be checked for spatial auto¬correlation. Therefore, we calculate spline correlograms. In addition to this, we investigate partial dependency plots and bivariate interactions plots considering possible interactions between predictors to improve model interpretation. Aiming at presenting this toolbox for model quality assessment, we investigate the influence of strategies in the construction of training datasets for statistical models on model quality.

Neural Network based Control of SG based Standalone Generating System with Energy Storage for Power Quality Enhancement

NASA Astrophysics Data System (ADS)

Nayar, Priya; Singh, Bhim; Mishra, Sukumar

2017-08-01

An artificial intelligence based control algorithm is used in solving power quality problems of a diesel engine driven synchronous generator with automatic voltage regulator and governor based standalone system. A voltage source converter integrated with a battery energy storage system is employed to mitigate the power quality problems. An adaptive neural network based signed regressor control algorithm is used for the estimation of the fundamental component of load currents for control of a standalone system with load leveling as an integral feature. The developed model of the system performs accurately under varying load conditions and provides good dynamic response to the step changes in loads. The real time performance is achieved using MATLAB along with simulink/simpower system toolboxes and results adhere to an IEEE-519 standard for power quality enhancement.

Application of Strategic Management Principles as Tool to Improve Quality of Construction Technological Process

NASA Astrophysics Data System (ADS)

Kluchnikova, O.; Pobegaylov, O.

2017-11-01

The article focuses on the basic theory and practical aspects of the strategic management improving in terms of enhancing the quality of a technological process: these aspects have been proven experimentally by their introduction in company operations. The authors have worked out some proposals aimed at the selection of an optimal supplier for building companies as well as the algorithm for the analysis and optimization of a construction company basing on scientific and practical research as well as on the experimental data obtained in the experiment.

Antecedents of CIO Effectiveness: A Role-Based Perspective

DTIC Science & Technology

1999-08-26

an aspect of power ( Szilagyi & Wallace , 1990), this study will take into account the different contingent sources of power and influence that are...1974. Handbook of Leadership: A Survey of Theory and Research. Free Press, NY, NY. Szilagyi , Jr. A & Wallace , Jr. M. 1990. Organizational Behavior and

Allergen manufacturing and quality aspects for allergen immunotherapy in Europe and the United States: An analysis from the EAACI AIT Guidelines Project.

PubMed

Bonertz, A; Roberts, G; Slater, J E; Bridgewater, J; Rabin, R L; Hoefnagel, M; Timon, M; Pini, C; Pfaar, O; Sheikh, A; Ryan, D; Akdis, C; Goldstein, J; Poulsen, L K; van Ree, R; Rhyner, C; Barber, D; Palomares, O; Pawankar, R; Hamerlijnk, D; Klimek, L; Agache, I; Angier, E; Casale, T; Fernandez-Rivas, M; Halken, S; Jutel, M; Lau, S; Pajno, G; Sturm, G; Varga, E M; Gerth van Wijk, R; Bonini, S; Muraro, A; Vieths, S

2018-04-01

Adequate quality is essential for any medicinal product to be eligible for marketing. Quality includes verification of the identity, content and purity of a medicinal product in combination with a specified production process and its control. Allergen products derived from natural sources require particular considerations to ensure adequate quality. Here, we describe key aspects of the documentation on manufacturing and quality aspects for allergen immunotherapy products in the European Union and the United States. In some key parts, requirements in these areas are harmonized while other fields are regulated separately between both regions. Essential differences are found in the use of Reference Preparations, or the requirement to apply standardized assays for potency determination. As the types of products available are different in specific regions, regulatory guidance for such products may also be available in one specific region only, such as for allergoids in the European Union. Region-specific issues and priorities are a result of this. As allergen products derived from natural sources are inherently variable in their qualitative and quantitative composition, these products present special challenges to balance the variability and ensuring batch-to-batch consistency. Advancements in scientific knowledge on specific allergens and their role in allergic disease will consequentially find representation in future regulatory guidelines. © 2017 EAACI and John Wiley and Sons A/S. Published by John Wiley and Sons Ltd.

Systematic review of guidelines for management of intermediate hepatocellular carcinoma using the Appraisal of Guidelines Research and Evaluation II instrument.

PubMed

Holvoet, Tom; Raevens, Sarah; Vandewynckel, Yves-Paul; Van Biesen, Wim; Geboes, Karen; Van Vlierberghe, Hans

2015-10-01

Hepatocellular carcinoma is the second leading cause of cancer-related mortality worldwide. Multiple guidelines have been developed to assist clinicians in its management. We aimed to explore methodological quality of these guidelines focusing on treatment of intermediate hepatocellular carcinoma by transarterial chemoembolization. A systematic search was performed for Clinical Practice Guidelines and Consensus statements for hepatocellular carcinoma management. Guideline quality was appraised using the Appraisal of Guidelines Research and Evaluation II instrument, which rates guideline development processes across 6 domains: 'Scope and purpose', 'Stakeholder involvement', 'Rigour of development', 'Clarity of presentation', 'Applicability' and 'Editorial independence'. Thematic analysis of guidelines was performed to map differences in recommendations. Quality of 21 included guidelines varied widely, but was overall poor with only one guideline passing the 50% mark on all domains. Key recommendations as (contra)indications and technical aspects were inconsistent between guidelines. Aspects on side effects and health economics were mainly neglected. Methodological quality of guidelines on transarterial chemoembolization in hepatocellular carcinoma management is poor. This results in important discrepancies between guideline recommendations, creating confusion in clinical practice. Incorporation of the Appraisal of Guidelines Research and Evaluation II instrument in guideline development may improve quality of future guidelines by increasing focus on methodological aspects. Copyright © 2015 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

A measurement-driven approach to assess power line telecommunication (PLT) network quality of service (QoS) performance parameters

NASA Astrophysics Data System (ADS)

Betta, G.; Capriglione, D.; Ferrigno, L.; Laracca, M.

2009-10-01

Power line telecommunication (PLT) technology offers cheap and fast ways for providing in-home broadband services and local area networking. Its main advantage is due to the possibility of using the pre-existing electrical grid as a communication channel. Nevertheless, technical challenges arise from the difficulty of operating on a hostile medium, not designed for communication purposes, characterized by complex channel modeling and by varying time response. These aspects put practical problems for designers and testers in the assessment of network quality of service performance parameters such as the throughput, the latency, the jitter, and the reliability. The measurement of these parameters has not yet been standardized so that there do not exist reference test set-ups and measurement methodologies (i.e. the type of isolation from the ac main, the observation time and the number of experiments, the measurement uncertainty and so on). Consequently, experiments executed by adopting different methods may lead to incompatible measurement results, thus making it also impossible to have reliable comparisons of different PLT modems. Really, the development of standard procedures is a very difficult task because the scenarios in which the PLT modems can work are very wide and then the application of an exhaustive approach (in which all the parameters influencing the PLT performance should be considered) would be very complex and time consuming, thus making the modem characterization very expensive. In this paper, the authors propose a methodological approach to develop an efficient measurement procedure able to reliably assess the performance of PLT modems (in terms of network quality of service parameters) with a minimum number of experiments. It is based on both creating a reconfigurable grid to which real disturbing loads are connected and implementing an original design of the experiment technique based on the effects of the uncertainty of the measurement results. Methods are also provided to analyze measurement results and to estimate the measurement uncertainty.

Muscle Power Is an Independent Determinant of Pain and Quality of Life in Knee Osteoarthritis.

PubMed

Reid, Kieran F; Price, Lori Lyn; Harvey, William F; Driban, Jeffrey B; Hau, Cynthia; Fielding, Roger A; Wang, Chenchen

2015-12-01

This study examined the relationships between leg muscle strength, power, and perceived disease severity in subjects with knee osteoarthritis (OA) in order to determine whether dynamic leg extensor muscle power would be associated with pain and quality of life in knee OA. Baseline data on 190 subjects with knee OA (mean ± SD age 60.2 ± 10.4 years, body mass index 32.7 ± 7.2 kg/m(2) ) were obtained from a randomized controlled trial. Knee pain was measured using the Western Ontario and McMaster Universities Osteoarthritis Index, and health-related quality of life was assessed using the Short Form 36 (SF-36). One-repetition maximum (1RM) strength was assessed using the bilateral leg press, and peak muscle power was measured during 5 maximum voluntary velocity repetitions at 40% and 70% of 1RM. In univariate analysis, greater muscle power was significantly associated with pain (r = -0.17, P < 0.02) and also significantly and positively associated with SF-36 physical component summary (PCS) scores (r = 0.16, P < 0.05). After adjustment for multiple covariates, muscle power was a significant independent predictor of pain (P ≤ 0.05) and PCS scores (P ≤ 0.04). However, muscle strength was not an independent determinant of pain or quality of life (P ≥ 0.06). Muscle power is an independent determinant of pain and quality of life in knee OA. Compared to strength, muscle power may be a more clinically important measure of muscle function within this population. New trials to systematically examine the impact of muscle power training interventions on disease severity in knee OA are particularly warranted. © 2015, American College of Rheumatology.

Variable Frequency Operations of an Offshore Wind Power Plant with HVDC-VSC: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gevorgian, V.; Singh, M.; Muljadi, E.

2011-12-01

In this paper, a constant Volt/Hz operation applied to the Type 1 wind turbine generator. Various control aspects of Type 1 generators at the plant level and at the turbine level will be investigated. Based on DOE study, wind power generation may reach 330 GW by 2030 at the level of penetration of 20% of the total energy production. From this amount of wind power, 54 GW of wind power will be generated at offshore wind power plants. The deployment of offshore wind power plants requires power transmission from the plant to the load center inland. Since this power transmissionmore » requires submarine cable, there is a need to use High-Voltage Direct Current (HVDC) transmission. Otherwise, if the power is transmitted via alternating current, the reactive power generated by the cable capacitance may cause an excessive over voltage in the middle of the transmission distance which requires unnecessary oversized cable voltage breakdown capability. The use of HVDC is usually required for transmission distance longer than 50 kilometers of submarine cables to be economical. The use of HVDC brings another advantage; it is capable of operating at variable frequency. The inland substation will be operated to 60 Hz synched with the grid, the offshore substation can be operated at variable frequency, thus allowing the wind power plant to be operated at constant Volt/Hz. In this paper, a constant Volt/Hz operation applied to the Type 1 wind turbine generator. Various control aspects of Type 1 generators at the plant level and at the turbine level will be investigated.« less

The Impact of Transformer Winding Connections of A Grid-Connected PV on Voltage Quality Improvement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard; Tumbelaka, Hanny H.; Gao, Wenzhong

In this paper, the high-power PV plant is connected to the weak grid by means of a three-phase power transformer. The selection of transformer winding connection is critical especially when the PV inverter has a reactive power controller. In general, transformer winding connection can be arranged in star-star (with neutral earthed) or star-delta. The reactive power controller supports voltage regulation of the power system particularly under transient faults. Its control strategy is based on utilizing the grid currents to make a three-phase reactive unbalanced current with a small gain. The gain is determined by the system impedance. Simulation results exhibitmore » that the control strategy works very well particularly under disturbance conditions when the transformer winding connection is star-star with both neutrals grounded. The power quality in terms of the voltage quality is improved.« less

Aspects on HTS applications in confined power grids

NASA Astrophysics Data System (ADS)

Arndt, T.; Grundmann, J.; Kuhnert, A.; Kummeth, P.; Nick, W.; Oomen, M.; Schacherer, C.; Schmidt, W.

2014-12-01

In an increasing number of electric power grids the share of distributed energy generation is also increasing. The grids have to cope with a considerable change of power flow, which has an impact on the optimum topology of the grids and sub-grids (high-voltage, medium-voltage and low-voltage sub-grids) and the size of quasi-autonomous grid sections. Furthermore the stability of grids is influenced by its size. Thus special benefits of HTS applications in the power grid might become most visible in confined power grids.

1030 nm high power polarization maintained fiber laser with narrow linewidth and near-diffraction-limited beam quality

NASA Astrophysics Data System (ADS)

Chu, Qiuhui; Zhao, Pengfei; Li, Chengyu; Wang, Bopeng; Lin, Honghuan; Guo, Chao; Liu, Yu; Jing, Feng; Tang, Chuanxiang

2018-03-01

A high power 1030 nm ytterbium-doped polarization maintained fiber laser with optimized parameters is presented in this paper. The master oscillator power amplifier system with counter-pumped amplifier is established. The output power is 900 W, along with a light-to-light efficiency of 64.2%. The amplified spontaneous emission suppression ratio of spectrum reaches to 40 dB with 3 dB linewidth of 0.14 nm. The polarization extinction ratio is 12 dB, and the beam quality factor is M2x=1.07, M2y=1.12. To the best of our knowledge, this is the first demonstration of 1030 nm high power fiber laser with narrow linewidth, near linear polarization, and neardiffraction-limited beam quality

Signal Quality and Service Quality: A Study of Local and International MBA Programs in Vietnam

ERIC Educational Resources Information Center

Nguyen, Tho D.

2009-01-01

Purpose: Although it is well known that firms can use signals to inform consumers about the unobservable aspect of their products or services in a market where asymmetric information exists, research on the relationship between signal quality and service quality is largely ignored. The purpose of this study is to investigate the role of signal…

Building-In Quality Rather than Assessing Quality Afterwards: A Technological Solution to Ensuring Computational Accuracy in Learning Materials

ERIC Educational Resources Information Center

Dunn, Peter

2008-01-01

Quality encompasses a very broad range of ideas in learning materials, yet the accuracy of the content is often overlooked as a measure of quality. Various aspects of accuracy are briefly considered, and the issue of computational accuracy is then considered further. When learning materials are produced containing the results of mathematical…

Advanced Quality Control Theory for Training and Education: A Guide to Optimizing Training and Education Efforts

ERIC Educational Resources Information Center

Heppler, Brad

2008-01-01

This is a book about quality and how to control quality through deliberate actions on the part of the professionals developing and implementing the instances of instruction available at an organization. Quality control theory favors no particular learning philosophy and is only directed towards aspects of how, what, where and when measurements are…

The Relationship between Perceived Quality of Mentoring and Anticipated Turnover among Executives in Higher Education

ERIC Educational Resources Information Center

Curtis, Lynne K.

2011-01-01

The purpose of the study was to identify if there was a relationship between the perceived quality of mentoring and the intention to quit among executive leaders in the field of higher education. The quality in mentoring (QIM) questionnaire was used to measure the quality of four separate aspects of a mentoring program: management and support…

Fluid Dynamics of a High Aspect-Ratio Jet

NASA Technical Reports Server (NTRS)

Munro, Scott E.; Ahuja, K. K.

2003-01-01

Circulation control wings are a type of pneumatic high-lift device that have been extensively researched as to their aerodynamic benefits. However, there has been little research into the possible airframe noise reduction benefits of a circulation control wing. The key element of noise is the jet noise associated with the jet sheet emitted from the blowing slot. High aspect-ratio jet acoustic results (aspect-ratios from 100 to 3,000) from a related study showed that the jet noise of this type of jet was proportional to the slot height to the 3/2 power and slot width to the 1/2 power. Fluid dynamic experiments were performed in the present study on the high aspect-ratio nozzle to gain understanding of the flow characteristics in an effort to relate the acoustic results to flow parameters. Single hot-wire experiments indicated that the jet exhaust from the high aspect-ratio nozzle was similar to a 2-d turbulent jet. Two-wire space-correlation measurements were performed to attempt to find a relationship between the slot height of the jet and the length-scale of the flow noise generating turbulence structure. The turbulent eddy convection velocity was also calculated, and was found to vary with the local centerline velocity, and also as a function of the frequency of the eddy.

A quality-refinement process for medical imaging applications.

PubMed

Neuhaus, J; Maleike, D; Nolden, M; Kenngott, H-G; Meinzer, H-P; Wolf, I

2009-01-01

To introduce and evaluate a process for refinement of software quality that is suitable to research groups. In order to avoid constraining researchers too much, the quality improvement process has to be designed carefully. The scope of this paper is to present and evaluate a process to advance quality aspects of existing research prototypes in order to make them ready for initial clinical studies. The proposed process is tailored for research environments and therefore more lightweight than traditional quality management processes. Focus on quality criteria that are important at the given stage of the software life cycle. Usage of tools that automate aspects of the process is emphasized. To evaluate the additional effort that comes along with the process, it was exemplarily applied for eight prototypical software modules for medical image processing. The introduced process has been applied to improve the quality of all prototypes so that they could be successfully used in clinical studies. The quality refinement yielded an average of 13 person days of additional effort per project. Overall, 107 bugs were found and resolved by applying the process. Careful selection of quality criteria and the usage of automated process tools lead to a lightweight quality refinement process suitable for scientific research groups that can be applied to ensure a successful transfer of technical software prototypes into clinical research workflows.

Mapping the potential beverage quality of coffee produced in the Zona da Mata, Minas Gerais, Brazil.

PubMed

Silva, Samuel de Assis; de Queiroz, Daniel Marçal; Ferreira, Williams Pinto Marques; Corrêa, Paulo Cesar; Rufino, José Luis Dos Santos

2016-07-01

Detailed knowledge of coffee production systems enables optimization of crop management, harvesting and post-harvest techniques. In this study, coffee quality is mapped as a function of coffee variety, altitude and terrain aspect attributes. The work was performed in the Zona da Mata, Minas Gerais, Brazil. A large range of coffee quality grades was observed for the Red Catuai variety. For the Yellow Catuai variety, no quality grades lower than 70 were observed. Regarding the terrain aspect, samples from the southeast-facing slope (SEFS) and the northwest-facing slope (NWFS) exhibited distinct behaviors. The SEFS samples had a greater range of quality grades than did the NWFS samples. The highest grade was obtained from an NWFS point. The lowest quality values and the largest range of grades were observed at lower altitudes. The extracts from the highest-altitude samples did not produce any low-quality coffee. The production site's position and altitude are the primary variables that influenced the coffee quality. The study area has micro-regions with grades ranging from 80 to 94. These areas have the potential for producing specialty coffees. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Significance of quality of care for quality of life in persons with dementia at risk of nursing home admission: a cross-sectional study.

PubMed

Bökberg, Christina; Ahlström, Gerd; Karlsson, Staffan

2017-01-01

Quality of life in persons with dementia is, in large part, dependent on the quality of care they receive. Investigating both subjective and objective aspects of quality of care may reveal areas for improvement regarding their care, which information may ultimately enable persons with dementia to remain living in their own homes while maintaining quality of life. The aim of this study was to 1) describe self-reported quality of life in persons with dementia at risk of nursing home admission. 2) describe subjective and objective aspects of quality of care, 3) investigate the significance of quality of care for quality of life. A cross-sectional interview study design was used, based on questionnaires about quality of life (QoL-AD) and different aspects of quality of care (CLINT and quality indicators). The sample consisted of 177 persons with dementia living in urban and rural areas in Skåne County, Sweden. Descriptive and comparative statistics (Mann-Whitney U-test) were used to analyse the data. Based upon Lawton's conceptual framework for QoL in older people, persons with pain showed significantly lower quality of life in the dimensions behavioural competence ( p  = 0.026) and psychological wellbeing ( p  = 0.006) compared with those without pain. Satisfaction with care seemed to have a positive effect on quality of life. The overall quality of life was perceived high even though one-third of the persons with dementia had daily pain and had had a weight loss of ≥4% during the preceding year. Furthermore, 23% of the persons with dementia had fallen during the last month and 40% of them had sustained an injury when falling. This study indicates need for improvements in home care and services for persons with dementia at risk for nursing home admission. Registered nurses are responsible for nursing interventions related to pain, patient safety, skin care, prevention of accidents, and malnutrition. Therefore, it is of great importance for nurses to have knowledge about areas that can be improved to be able to tailor interventions and thereby improve quality of care outcomes such as quality of life in persons with dementia living at home.

Paralanguage and Kinesics (Nonverbal Communication).

ERIC Educational Resources Information Center

Key, Mary Ritchie

Nonverbal communication is an important and little-understood aspect of human communication. This book deals primarily with two aspects of nonverbal communication: paralanguage and kinesics. "Paralanguage" includes vocalizations such as hissing, shushing, and whistling, as well as speech modifications such as quality of voice (sepulchral, whiny,…

Principles and Practices for Quality Assurance and Quality Control

USGS Publications Warehouse

Jones, Berwyn E.

1999-01-01

Quality assurance and quality control are vital parts of highway runoff water-quality monitoring projects. To be effective, project quality assurance must address all aspects of the project, including project management responsibilities and resources, data quality objectives, sampling and analysis plans, data-collection protocols, data quality-control plans, data-assessment procedures and requirements, and project outputs. Quality control ensures that the data quality objectives are achieved as planned. The historical development and current state of the art of quality assurance and quality control concepts described in this report can be applied to evaluation of data from prior projects.

Women's expectations and experiences of maternity care in NSW--what women highlight as most important.

PubMed

Jenkins, Mary G; Ford, Jane B; Morris, Jonathan M; Roberts, Christine L

2014-09-01

Although surveys have identified that women are generally highly satisfied with maternity care provision, those aspects of care that women highlight as most important for achieving satisfaction and a satisfactory maternity care experience have not been reported. The aim of this study was to investigate how women understand and experience their maternity care and to report which aspects of care women highlight as most important. This large qualitative study explored women's expectations and experiences of maternity care provision. In-depth semi-structured interviews were conducted with 53 women experiencing maternity care in a range of tertiary, regional, rural, remote hospitals and midwife-led practices in the state of New South Wales, Australia during 2011-2012. Included in the interview schedule was the question 'What 3 aspects would you see as most important for delivery of maternity care?' Descriptive analyses of entire transcripts and responses to the question on most important aspects of care were undertaken. Descriptive analyses of women's responses identified 5 important aspects of care: woman-focused care, staff qualities, systems and facilities, family-focused care and continuity of care/information. First-time mothers were more likely to identify woman-focused care, staff qualities and continuity of care/information as important aspects than multiparous mothers. Urban and regional mothers highlighted staff qualities as having greater importance for satisfaction with their care while rural and particularly remote women nominated systems and facilities as important. Our study showed that women from a range of settings are more concerned with staff and relational issues than facilities. Differences in perceptions among primiparous versus multiparous women, at different stages of pregnancy and among women from rural and remote compared to urban settings highlight the need to include women with a diversity of experience when trying to understand the aspects of maternity care most important to women. Copyright © 2014. Published by Elsevier Ltd.

Economic evaluations of interventions to manage hyperphosphataemia in adult haemodialysis patients: A systematic review.

PubMed

Rizk, Rana; Hiligsmann, Mickaël; Karavetian, Mirey; Evers, Silvia Maa

2016-03-01

Managing hyperphosphataemia in haemodialysis patients is resource-intensive. A search for cost-effective interventions in this field is needed to inform decisions on the allocation of healthcare resources. NHSEED, MEDLINE, EMBASE and CINAHL were searched for full economic evaluations of hyperphosphataemia-managing interventions in adult haemodialysis patients, published between 2004 and 2014, in English, French, Dutch or German. Incremental cost-effectiveness ratios of the interventions were up-rated to 2013US$ using Purchasing Power Parity conversion rates and Consumer Price Indices. The quality of included studies was assessed using the Extended Consensus on Health Economic Criteria List. Twelve out of the 1681 retrieved records fulfilled the inclusion criteria. They reported only on one aspect of hyperphosphataemia management, which is the use of phosphate binders (calcium-based and calcium-free, in first-line and sequential use). No economic evaluations of other phosphorus-lowering interventions were found. The included articles derived from five countries and most of them were funded by pharmaceutical companies. The incremental cost-effectiveness ratios of phosphate binders ranged between US$11 461 and US$157 760 per quality-adjusted life-year gained. Calcium-based binders (especially calcium acetate) appear to be the optimal cost-effective first- and second-line therapy in prevalent patients, while the calcium-free binder, lanthanum carbonate, might provide good value for money, as second-line therapy, in incident patients. The studies' overall quality was suboptimal. Drawing firm conclusions was not possible due to the quality heterogeneity and inconsistent results. Future high-quality economic evaluations are needed to confirm the findings of this review and to address other interventions to manage hyperphosphataemia in this population. © 2015 Asian Pacific Society of Nephrology.

From field notes to data portal - An operational QA/QC framework for tower networks

NASA Astrophysics Data System (ADS)

Sturtevant, C.; Hackley, S.; Meehan, T.; Roberti, J. A.; Holling, G.; Bonarrigo, S.

2016-12-01

Quality assurance and control (QA/QC) is one of the most important yet challenging aspects of producing research-quality data. This is especially so for environmental sensor networks collecting numerous high-frequency measurement streams at distributed sites. Here, the quality issues are multi-faceted, including sensor malfunctions, unmet theoretical assumptions, and measurement interference from the natural environment. To complicate matters, there are often multiple personnel managing different sites or different steps in the data flow. For large, centrally managed sensor networks such as NEON, the separation of field and processing duties is in the extreme. Tower networks such as Ameriflux, ICOS, and NEON continue to grow in size and sophistication, yet tools for robust, efficient, scalable QA/QC have lagged. Quality control remains a largely manual process relying on visual inspection of the data. In addition, notes of observed measurement interference or visible problems are often recorded on paper without an explicit pathway to data flagging during processing. As such, an increase in network size requires a near-proportional increase in personnel devoted to QA/QC, quickly stressing the human resources available. There is a need for a scalable, operational QA/QC framework that combines the efficiency and standardization of automated tests with the power and flexibility of visual checks, and includes an efficient communication pathway from field personnel to data processors to end users. Here we propose such a framework and an accompanying set of tools in development, including a mobile application template for recording tower maintenance and an R/shiny application for efficiently monitoring and synthesizing data quality issues. This framework seeks to incorporate lessons learned from the Ameriflux community and provide tools to aid continued network advancements.

Community-wide assessment of pollen limitation in hummingbird-pollinated plants of a tropical montane rain forest

PubMed Central

Wolowski, Marina; Ashman, Tia-Lynn; Freitas, Leandro

2013-01-01

Background and Aims Although pollen limitation of reproduction (PL) has been widely studied, our understanding of its occurrence in tropical communities, especially for bird-pollinated plants, is underdeveloped. In addition, inclusion of both quantity and quality aspects in studies of PL are generally lacking. Within hummingbird-pollinated plants, a prediction was made for higher PL for the quality than quantity aspects and a minor effect of temporal variation because hummingbirds are constant and efficient pollen vectors but they may transfer low quality pollen. Methods Field hand and open pollination experiments were conducted on 21 species in a tropical montane rain forest over 2 years. The quantity (fruit set and seeds per fruit) and quality (seed weight and germination) aspects of reproduction were assessed as the response to open pollination relative to outcross hand pollination. The relationships between the effect size of quantity and quality aspects of reproduction and predictive plant features (self-incompatibility, autogamy, density and pollinator specialization level) were assessed with phylogenetic generalized linear models. Key Results Just over half of all the species expressed PL for one or more response variables. On average, the severity of PL was strong for one quality variable (seed germination; 0·83), but insignificant for another (seed weight; –0·03), and low to moderate for quantity variables (0·31 for seeds per fruit and 0·39 for fruit set). There was only a minor contribution of temporal variation to PL within the studied species. Common predictors of PL, i.e. phylogenetic relatedness, self-incompatibility, autogamy, plant density and pollinator specialization level, did not adequately explain variation in PL within this community. Conclusions Despite the measurable degree of PL within these hummingbird-pollinated plants, the causes of pollen quality and quantity insufficiency are not clear. Variables other than those tested may contribute to PL or causes of PL may vary among species and cannot adequately be accounted for when assessed from the within-community perspective. PMID:23845434