An OmpA family protein, a target of the GinI/GinR quorum-sensing system in Gluconacetobacter intermedius, controls acetic acid fermentation.

PubMed

Iida, Aya; Ohnishi, Yasuo; Horinouchi, Sueharu

2008-07-01

Via N-acylhomoserine lactones, the GinI/GinR quorum-sensing system in Gluconacetobacter intermedius NCI1051, a gram-negative acetic acid bacterium, represses acetic acid and gluconic acid fermentation. Two-dimensional polyacrylamide gel electrophoretic analysis of protein profiles of strain NCI1051 and ginI and ginR mutants identified a protein that was produced in response to the GinI/GinR regulatory system. Cloning and nucleotide sequencing of the gene encoding this protein revealed that it encoded an OmpA family protein, named GmpA. gmpA was a member of the gene cluster containing three adjacent homologous genes, gmpA to gmpC, the organization of which appeared to be unique to vinegar producers, including "Gluconacetobacter polyoxogenes." In addition, GmpA was unique among the OmpA family proteins in that its N-terminal membrane domain forming eight antiparallel transmembrane beta-strands contained an extra sequence in one of the surface-exposed loops. Transcriptional analysis showed that only gmpA of the three adjacent gmp genes was activated by the GinI/GinR quorum-sensing system. However, gmpA was not controlled directly by GinR but was controlled by an 89-amino-acid protein, GinA, a target of this quorum-sensing system. A gmpA mutant grew more rapidly in the presence of 2% (vol/vol) ethanol and accumulated acetic acid and gluconic acid in greater final yields than strain NCI1051. Thus, GmpA plays a role in repressing oxidative fermentation, including acetic acid fermentation, which is unique to acetic acid bacteria and allows ATP synthesis via ethanol oxidation. Consistent with the involvement of gmpA in oxidative fermentation, its transcription was also enhanced by ethanol and acetic acid.

Energy Monitoring in Gins - 2013 Update

USDA-ARS?s Scientific Manuscript database

Energy, comprised of electricity and fuel, is the second largest source of variable costs for cotton gins, after labor. Few studies of gin energy use have been conducted recently and none have monitored energy use continuously throughout the ginning season. More detailed information is needed to ide...

Energy Monitoring in Gins - 2012 Preliminary Results

USDA-ARS?s Scientific Manuscript database

Electricity and fuel are the second largest source of variable costs for cotton gins, after labor. Few studies of gin energy use have been conducted recently and none have monitored energy use continuously throughout the ginning season. More detailed information is needed to identify management st...

Roller ginning

USDA-ARS?s Scientific Manuscript database

Roller ginning provided the first mechanical means of separating cotton lint from seed. The first true roller gin was the Churka gin, which was hand operated and consisted of two hard rollers that ran together at the same surface speed, pinching fiber from the seed and producing up to 2.3 kg (5.0 l...

Varietal Variability for Cotton Ginning Efficiency

USDA-ARS?s Scientific Manuscript database

Energy consumption is one of the largest expenses of a cotton gin. In light of the rising cost of energy, all avenues should be exploited to optimize energy use in modern cotton gins. One option is to study genetic variability within the available germplasm to look for varieties that gin faster and ...

29 CFR 780.810 - Employees not “engaged in” ginning.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... “engaged in ginning of cotton”: (a) Transporting seed cotton from farms or other points to the gin. (b...

29 CFR 780.810 - Employees not “engaged in” ginning.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... “engaged in ginning of cotton”: (a) Transporting seed cotton from farms or other points to the gin. (b...

29 CFR 780.810 - Employees not “engaged in” ginning.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... “engaged in ginning of cotton”: (a) Transporting seed cotton from farms or other points to the gin. (b...

29 CFR 780.810 - Employees not “engaged in” ginning.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... “engaged in ginning of cotton”: (a) Transporting seed cotton from farms or other points to the gin. (b...

29 CFR 780.810 - Employees not “engaged in” ginning.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... “engaged in ginning of cotton”: (a) Transporting seed cotton from farms or other points to the gin. (b...

77 FR 35273 - Approval and Promulgation of Implementation Plans; New Mexico; Minor New Source Review (NSR...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-13

... Permitting Rule for Cotton Gins AGENCY: Environmental Protection Agency (EPA). ACTION: Direct final rule... particulate matter emissions from cotton ginning facilities. The submitted Cotton Gin regulation provides an alternative preconstruction process for cotton ginning facilities that will emit no more than 50 tons per year...

An OmpA Family Protein, a Target of the GinI/GinR Quorum-Sensing System in Gluconacetobacter intermedius, Controls Acetic Acid Fermentation▿ †

PubMed Central

Iida, Aya; Ohnishi, Yasuo; Horinouchi, Sueharu

2008-01-01

Via N-acylhomoserine lactones, the GinI/GinR quorum-sensing system in Gluconacetobacter intermedius NCI1051, a gram-negative acetic acid bacterium, represses acetic acid and gluconic acid fermentation. Two-dimensional polyacrylamide gel electrophoretic analysis of protein profiles of strain NCI1051 and ginI and ginR mutants identified a protein that was produced in response to the GinI/GinR regulatory system. Cloning and nucleotide sequencing of the gene encoding this protein revealed that it encoded an OmpA family protein, named GmpA. gmpA was a member of the gene cluster containing three adjacent homologous genes, gmpA to gmpC, the organization of which appeared to be unique to vinegar producers, including “Gluconacetobacter polyoxogenes.” In addition, GmpA was unique among the OmpA family proteins in that its N-terminal membrane domain forming eight antiparallel transmembrane β-strands contained an extra sequence in one of the surface-exposed loops. Transcriptional analysis showed that only gmpA of the three adjacent gmp genes was activated by the GinI/GinR quorum-sensing system. However, gmpA was not controlled directly by GinR but was controlled by an 89-amino-acid protein, GinA, a target of this quorum-sensing system. A gmpA mutant grew more rapidly in the presence of 2% (vol/vol) ethanol and accumulated acetic acid and gluconic acid in greater final yields than strain NCI1051. Thus, GmpA plays a role in repressing oxidative fermentation, including acetic acid fermentation, which is unique to acetic acid bacteria and allows ATP synthesis via ethanol oxidation. Consistent with the involvement of gmpA in oxidative fermentation, its transcription was also enhanced by ethanol and acetic acid. PMID:18487322

76 FR 4100 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

..., Rolling Thunder I Power Partners, LLC, Goshen Phase II LLC, Cedar Creek II, LLC. Description: Supplemental Information of Rolling Thunder I Power Partners, LLC. Filed Date: 01/12/2011. Accession Number: 20110112-5154...: Rolling Thunder I Power Partners, LLC. Description: Rolling Thunder I Power Partners, LLC submits tariff...

USDA Gin Lab Updates

USDA-ARS?s Scientific Manuscript database

This presentation provides an update to ginning industry stakeholders on current research efforts ongoing at the three USDA ARS ginning laboratories in Lubbock, TX, Stoneville, MS, and Mesilla Park, NM....

29 CFR 780.807 - Cotton must be ginned “for market.”

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Cotton must be ginned âfor market.â 780.807 Section 780.807... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton...

29 CFR 780.807 - Cotton must be ginned “for market.”

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Cotton must be ginned âfor market.â 780.807 Section 780.807... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton...

29 CFR 780.807 - Cotton must be ginned “for market.”

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Cotton must be ginned âfor market.â 780.807 Section 780.807... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton...

29 CFR 780.807 - Cotton must be ginned “for market.”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Cotton must be ginned âfor market.â 780.807 Section 780.807... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton...

29 CFR 780.807 - Cotton must be ginned “for market.”

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Cotton must be ginned âfor market.â 780.807 Section 780.807... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton...

Composition and ethanol production potential of cotton gin residues.

PubMed

Agblevor, Foster A; Batz, Sandra; Trumbo, Jessica

2003-01-01

Cotton gin residue (CGR) collected from five cotton gins was fractionated and characterized for summative composition. The major fractions of the CGR varied widely between cotton gins and consisted of clean lint (5-12%),hulls (16-48%), seeds (6-24%), motes (16-24%), and leaves (14-30%). The summative composition varied within and between cotton gins and consisted of ash (7.9-14.6%), acid-insoluble material (18-26%), xylan (4-15%),and cellulose (20-38%). Overlimed steam-exploded cotton gin waste was readily fermented to ethanol by Escherichia coli KO11. Ethanol yields were feedstock and severity dependent and ranged from 58 to 92.5% of the theoretical yields. The highest ethanol yield was 191 L (50 gal)/t, and the lowest was 120 L (32 gal)/t.

Cotton gin trash in the western United States: Resource inventory and energy conversion characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haase, S.G.; Quinn, M.W.; Whittier, J.P.

1993-12-31

The disposal of wastes associated with the processing of cotton is posing increasing problems for cotton gin operators in the western United States. Traditional disposal methods, such as open-air incineration and landfilling are no longer adequate due to increasing environmental concerns. This paper evaluates the technical, economic and environmental feasibility for cotton gin trash to serve as an energy resource. Cotton gin trash has been quantified, by county, in the five cotton-growing states of the western United States. The energy conversion technology that appears to offer the most promise is gasification. An economic evaluation model has been developed that willmore » allow gin operators to analyze their own situation to determine the profitability of converting gin trash to energy.« less

Eco-friendly rubberized cotton fabric roller for ginning machines.

PubMed

Iyer, G V

2007-01-01

This article discusses the pollution caused by chrome composite leather-clad (CCLC) rollers commonly used in cotton roller ginning mills and suggests an alternative roller material. CCLC rollers contain about 18,000 to 36,000 mg/kg (ppm) total chromium in trivalent and hexavalent forms, which are toxic to human health and carcinogenic. When seed-cotton is processed in double roller (DR) ginning machines, the lint is contaminated with chromium, and chromium particles are carried into the spun yarns and cotton by-products. Specifically, due to persistent rubbing of the leather-clad roller over the stationary knife during the ginning process, the lint is contaminated with about 140 to 1990 ppm of chromium, and the spun yarns and cotton by-products contain about 100 to 200 ppm, far in excess of the standard limit of 0.1 ppm. Gin and mill workers are directly exposed to this carcinogenic substance. To offset this problem, pollution-free rubberized cotton fabric (RCF) rollers have been fabricated and tested in roller gins. The RCF roller covering is made of multiple layers of fabric bonded together using a white rubber compound, which has a surface finish conducive to high ginning efficiency. This eliminates chromium contamination and pollution during the ginning process. On the basis of the design and development of various test rollers and subsequent evaluation studies, the performance of pollution-free RCF rollers has been demonstrated with reference to their commercial benefit and eco-friendliness in cotton ginning mills.

76 FR 12952 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

.... Applicants: Rolling Thunder I Power Partners, LLC. Description: Rolling Thunder I Power Partners, LLC submits tariff filing per 35.17(b): MBR Tariff Filing of Rolling Thunder I Power Partners, LLC to be effective 3...

Ginning

USDA-ARS?s Scientific Manuscript database

The purpose of the cotton ginning process is to separate a field crop into its salable components. It is a necessary step between the farmer and the textile manufacturer. The original gin was a simple manually operated device that took hand harvested cotton and separated fiber from the cottonseed. T...

Energy monitoring in gins

USDA-ARS?s Scientific Manuscript database

Energy costs are the second largest source of variable costs for cotton gins, accounting for 27% of variable costs. Energy use has typically not been a major consideration in gin design, and previous studies of energy use have utilized instantaneous readings or aggregated season-long values. In this...

Energy Monitoring in Gins - 2011

USDA-ARS?s Scientific Manuscript database

Energy costs are the second largest source of variable costs for gins, accounting for 27% of variable costs. Energy use has typically not been a major consideration in gin design and previous studies of energy use have utilized instantaneous readings or aggregated season-long values. Electricity u...

Electricity use patterns in cotton gins

USDA-ARS?s Scientific Manuscript database

Energy costs are the second largest source of variable costs for cotton gins, with electricity accounting for 18% of variable costs. Energy use has typically not been a major consideration in gin design and previous studies of energy use have utilized instantaneous readings or aggregated season-lon...

How current ginning processes affect fiber length uniformity index

USDA-ARS?s Scientific Manuscript database

There is a need to develop cotton ginning methods that improve fiber characteristics that are compatible with the newer and more efficient spinning technologies. A literature search produced recent studies that described how current ginning processes affect HVI fiber length uniformity index. Resul...

Preliminary fuel use results from gin audits

USDA-ARS?s Scientific Manuscript database

Interest in improving sustainability in cotton production and processing has focused attention on fuel use by cotton gins for seed cotton drying. Audits are planned for multiple gin facilities over a diverse geography to establish baseline fuel usage and drying system efficiencies to reveal opportu...

Combustibility Determination for Cotton Gin Dust and Almond Huller Dust.

PubMed

Hughs, Sidney E; Wakelyn, Phillip J

2017-04-26

It has been documented that some dusts generated while processing agricultural products, such as grain and sugar, can constitute combustible dust hazards. After a catastrophic dust explosion in a sugar refinery in 2008, the Occupational Safety and Health Administration (OSHA) initiated action to develop a mandatory standard to comprehensively address the fire and explosion hazards of combustible dusts. Cotton fiber and related materials from cotton ginning, in loose form, can support smoldering combustion if ignited by an outside source. However, dust fires and other more hazardous events, such as dust explosions, are unknown in the cotton ginning industry. Dust material that accumulates inside cotton gins and almond huller plants during normal processing was collected for testing to determine combustibility. Cotton gin dust is composed of greater than 50% inert inorganic mineral dust (ash content), while almond huller dust is composed of at least 7% inert inorganic material. Inorganic mineral dust is not a combustible dust. The collected samples of cotton gin dust and almond huller dust were sieved to a known particle size range for testing to determine combustibility potential. Combustibility testing was conducted on the cotton gin dust and almond huller dust samples using the UN test for combustibility suggested in NFPA 652.. This testing indicated that neither the cotton gin dust nor the almond huller dust should be considered combustible dusts (i.e., not a Division 4.1 flammable hazard per 49 CFR 173.124). Copyright© by the American Society of Agricultural Engineers.

Cotton gin drying systems–patterns in fuel energy use

USDA-ARS?s Scientific Manuscript database

Fuel cost increases and consumption variability threaten gin profitability. Twenty-three U.S. cotton gins were audited to elucidate drying system components, layouts and process control strategies that made better use of fuel. Seed cotton samples were obtained before and after each drying system a...

Real-time sensing of lint quality

USDA-ARS?s Scientific Manuscript database

Modem cotton gins have the purpose of extracting lint (the cotton) from trash and seeds- usually the sticks, leaves and burrs that are entrained with the cotton. These modem gins include many individual machine components that are operated sequentially to form the gin processing line. Recent on-line...

77 FR 35326 - Approval and Promulgation of Implementation Plans; New Mexico; Minor New Source Review (NSR...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-13

... for Cotton Gins AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA is... regulation related to minor NSR preconstruction permitting for particulate matter emissions from cotton ginning facilities. The submitted Cotton Gin regulation provides an alternative preconstruction process...

Impact of experimental gins on fiber quality parameters

USDA-ARS?s Scientific Manuscript database

Stripper harvested cotton usually contains approximately 6 to 8 times higher levels of trash than machine picked cotton. Ginning in stripper areas should be made more efficient at removing the trash particles while preserving fiber quality. Fiber breakage is a concern at two junctures: the saw gins ...

Physical processing and emission characteristics of firelogs from cotton ginning byproducts

USDA-ARS?s Scientific Manuscript database

A study was conducted to evaluate the suitability of cotton ginning byproducts for manufacturing firelogs. Cotton burr with stem (CBS) a byproduct from cotton ginning operation was mixed with petroleum based paraffin wax to manufacture firelogs. The impact of varying the formulation of firelogs, an...

Influence of season of lambing on gastrointestinal nematode infection of lambs

USDA-ARS?s Scientific Manuscript database

Gastrointestinal nematodes (GIN) are a major constraint to sheep production, especially during the summer when the conditions for Haemonchus contortus are ideal. GIN infection is minimal during the winter, but there is little known about differences in GIN control between fall born and winter born l...

Changes in cotton gin energy consumption apportioned by ten functions

USDA-ARS?s Scientific Manuscript database

The public is concerned about air quality and sustainability. Cotton producers, gin owners and plant managers are concerned about rising energy prices. Both have an interest in cotton gin energy consumption trends. Changes in cotton gins’ energy consumption over the past fifty years, a period of ...

Changes in cotton gin energy use over the past 50 years

USDA-ARS?s Scientific Manuscript database

The public is concerned about environmental quality and energy sustainability. Cotton producers, gin owners and plant managers are concerned about rising energy prices. Both have an interest in current cotton gin energy consumption, and may also be interested in how it has changed over time. Informa...

Application of cotton burr/stem in thermoplastic composites

USDA-ARS?s Scientific Manuscript database

Cotton gin waste (CGW) is a waste stream from a ginning operation that is rich in ligno-cellulosic fibers. Currently, there are no major commercial-scale applications for this material except for a small fraction that goes into either composting or is land applied. For a majority of gins across the ...

Efficacy of sericea lespedeza hay as a natural dewormer in goats: Dose titration study

USDA-ARS?s Scientific Manuscript database

Gastrointestinal nematode (GIN) parasitism is the greatest threat to economic sheep and goat production in the southern USA, and there is widespread prevalence of GIN resistance to broad-spectrum anthelmintics in this region. A natural alternative for controlling GIN in small ruminants is feeding h...

75. MISSISSIPPI, MONROE COUNTY, ARMORY COTTON GIN PORT BRIDGE Dirt ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

75. MISSISSIPPI, MONROE COUNTY, ARMORY COTTON GIN PORT BRIDGE Dirt road SW from Amory to River Cotton Gin Port road bridge. Copy of photo taken in 1932 by Jack Donnell, Columbus Mississippi. Sarcone Photography, Columbus, MS., Sept. 1978 - Bridges of the Upper Tombigbee River Valley, Columbus, Lowndes County, MS

Lubbock Gin Lab - Current Research and Leaf Grade Issues

USDA-ARS?s Scientific Manuscript database

This presentation was given to a group of cotton gin managers and allied industry reps. Approximately 100 attendees were in the audience. A discussion of the current research conducted at the USDA ARS CPPRU Ginning Laboratory in Lubbock, TX was given along with a discussion of leaf grade issues and ...

Seed Cotton Mass Flow Measurement in the Gin

USDA-ARS?s Scientific Manuscript database

Seed cotton mass flow measurement is necessary for the development of improved gin process control systems that can increase gin efficiency and improve fiber quality. Previous studies led to the development of a seed cotton mass flow rate sensor based on the static pressure drop across the blowbox, ...

Use of cotton gin trash and compatibilizers in polyethylene composites

USDA-ARS?s Scientific Manuscript database

The ginning of cotton produces 15-42% of foreign materials, called “cotton gin trash”, including cotton burr, stems, leaf fragment, and dirt. In this work we examined the mechanical properties of composites of low density polyethylene (LDPE) and cotton burr. The burr was ground into powder, and se...

Developing new emission factors for the Texas cotton ginning industry

USDA-ARS?s Scientific Manuscript database

The Texas Commission on Environmental Quality (TCEQ) is the regulatory authority that issues air quality permits in Texas. All cotton gins operating in Texas are required to obtain a permit from the TCEQ. The TCEQ is very experienced at permitting cotton gins, having rules in place requiring these p...

Bioinspiration and Biomimicry: Possibilities for Cotton Byproducts

USDA-ARS?s Scientific Manuscript database

The byproducts from cotton gins have commonly been referred to as cotton gin trash or cotton gin waste primarily because the lint and seed were the main focus of the operation and the byproducts were a financial liability that did not have a consistent market. Even though the byproducts were called ...

Patent gastrointestinal nematode infections in organically and conventionally pastured dairy cows and their impact on individual milk and fertility parameters.

PubMed

May, Katharina; Brügemann, Kerstin; König, Sven; Strube, Christina

2017-10-15

Infections with gastrointestinal nematodes (GIN) can lead to production losses and impacts on product quality in affected cows, which has mainly been demonstrated during deworming experiments or via herd-level measurements. Here, a field study was carried out to explore the association between GIN infection status and milk production as well as fertility parameters in individual dairy cows. Different selection lines of Black and White cows were included in the study, which were distributed among 17 small and medium-sized organic and conventional German grassland farms. Faecal samples of 1166 dairy cows were examined twice, in July and September 2015. Nematode eggs were found in the faeces of 473 (40.6%) cows. As expected, strongylid eggs (Trichostrongylidae or Oesophagostomum and Bunostomum spp., respectively) were the predominant morphotype, followed by Strongyloides papillosus and Capillaria spp. eggs. In July, cows kept under organic conditions had a significantly lower GIN prevalence in comparison to cows kept on conventional farms. Faecal egg counts were generally low, with the highest value in September and an arithmetic mean of 11.3 eggs per gram faeces (EPG) for all observations. The relationships between GIN infection status and milk yield (kg milk/cow/day), milk protein content (%) and milk fat content (%) for each first test-day record after parasitological assessment were estimated by using linear mixed models. Milk protein content was estimated 0.05% lower in GIN positive compared to GIN negative cows, whereas no significant effect on milk yield or milk fat content was observed. The impact of GIN infection status on success in first insemination (SFI) was estimated by using a threshold model. No significant association was demonstrated between GIN infection status and SFI. Unexpectedly, the fertility parameter days from calving-to-first-service (CTFS) showed a significantly shorter average interval in GIN positive cows. However, these data on reproductive performance need to be considered preliminary as long-term studies are needed to allow a firm prediction of the impact of GIN infection status on dairy cow fertility parameters. Copyright © 2017 Elsevier B.V. All rights reserved.

Enhancing power generation of floating wave power generators by utilization of nonlinear roll-pitch coupling

NASA Astrophysics Data System (ADS)

Yerrapragada, Karthik; Ansari, M. H.; Karami, M. Amin

2017-09-01

We propose utilization of the nonlinear coupling between the roll and pitch motions of wave energy harvesting vessels to increase their power generation by orders of magnitude. Unlike linear vessels that exhibit unidirectional motion, our vessel undergoes both pitch and roll motions in response to frontal waves. This significantly magnifies the motion of the vessel and thus improves the power production by several orders of magnitude. The ocean waves result in roll and pitch motions of the vessel, which in turn causes rotation of an onboard pendulum. The pendulum is connected to an electric generator to produce power. The coupled electro-mechanical system is modeled using energy methods. This paper investigates the power generation of the vessel when the ratio between pitch and roll natural frequencies is about 2 to 1. In that case, a nonlinear energy transfer occurs between the roll and pitch motions, causing the vessel to perform coupled pitch and roll motion even though it is only excited in the pitch direction. It is shown that co-existence of pitch and roll motions significantly enhances the pendulum rotation and power generation. A method for tuning the natural frequencies of the vessel is proposed to make the energy generator robust to variations of the frequency of the incident waves. It is shown that the proposed method enhances the power output of the floating wave power generators by multiple orders of magnitude. A small-scale prototype is developed for the proof of concept. The nonlinear energy transfer and the full rotation of the pendulum in the prototype are observed in the experimental tests.

Effect of Cotton Fiber Cohesion on Energy Use and Fiber Quality During Processing: 2nd Year

USDA-ARS?s Scientific Manuscript database

Energy is a significant expense for cotton gins, and consumers of cotton goods are increasingly concerned with the sustainability of cotton production. Previous research has demonstrated the effect of fiber-seed attachment force on the energy required to gin cotton, which will affect the ginning rat...

Influence of defoliation date and gin-drying temperature on oven moisture and KFT water within cotton cultivars

USDA-ARS?s Scientific Manuscript database

Water measured in lint cotton by Karl Fischer Titration was compared to moisture content measured by standard oven-drying in two cultivars. The cultivars had been defoliated at different times and ginned at two possible temperatures. Ginned lint was further processed to produce mechanically cleaned,...

A critical evaluation of combustible/explosible dust testing methods-part 1

USDA-ARS?s Scientific Manuscript database

Tests were conducted by the Center for Agricultural Air Quality Engineering and Science (CAAQES) and by Safety Consulting Engineers Inc. (SCE) to determine if dust found in cotton gins (gin dust) would serve as fuel for dust explosions. In other words, is gin dust explosible? The laboratory tests us...

29 CFR 780.804 - “Ginning” of cotton.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false âGinningâ of cotton. 780.804 Section 780.804 Labor... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton for...

75 FR 68214 - Flubendiamide; Pesticide Tolerances; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... established tolerances for corn, field, grain; corn, field, stover; corn, sweet, stover; and cotton gin... ppm); corn, sweet, stover (0.25 ppm); and cotton gin byproducts (0.60 ppm). As supported by submitted..., stover; corn, sweet, stover; and cotton gin byproducts in the table in Sec. 180.369(a)(1). III. Why is...

29 CFR 780.803 - Basic conditions of exemption; first part, ginning of cotton.

Code of Federal Regulations, 2010 CFR

2010-07-01

... cotton. 780.803 Section 780.803 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet... Section 13(b)(15) Introductory § 780.803 Basic conditions of exemption; first part, ginning of cotton...

29 CFR 780.803 - Basic conditions of exemption; first part, ginning of cotton.

Code of Federal Regulations, 2012 CFR

2012-07-01

... cotton. 780.803 Section 780.803 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet... Section 13(b)(15) Introductory § 780.803 Basic conditions of exemption; first part, ginning of cotton...

29 CFR 780.804 - “Ginning” of cotton.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false âGinningâ of cotton. 780.804 Section 780.804 Labor... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton for...

The Gin Builder: Examining the Skills Needed for the New Industrial Age.

ERIC Educational Resources Information Center

Kosty, Carlita; Lubar, Steven; Rhar, Bill

2000-01-01

Presents a lesson plan in which students explore the impact of industrialization on agriculture, the experience of William Ellison, a free black cotton gin mechanic, and the skills that Ellison needed. Students discuss handwritten documents, diagrams, and census information related to the cotton gin. Includes a bibliography and four handouts. (CMK)

29 CFR 780.804 - “Ginning” of cotton.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false âGinningâ of cotton. 780.804 Section 780.804 Labor... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton for...

29 CFR 780.803 - Basic conditions of exemption; first part, ginning of cotton.

Code of Federal Regulations, 2014 CFR

2014-07-01

... cotton. 780.803 Section 780.803 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet... Section 13(b)(15) Introductory § 780.803 Basic conditions of exemption; first part, ginning of cotton...

29 CFR 780.804 - “Ginning” of cotton.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false âGinningâ of cotton. 780.804 Section 780.804 Labor... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton for...

29 CFR 780.804 - “Ginning” of cotton.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false âGinningâ of cotton. 780.804 Section 780.804 Labor... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar or Syrup; Exemption From Overtime Pay Requirements Under Section 13(b)(15) Ginning of Cotton for...

29 CFR 780.803 - Basic conditions of exemption; first part, ginning of cotton.

Code of Federal Regulations, 2013 CFR

2013-07-01

... cotton. 780.803 Section 780.803 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet... Section 13(b)(15) Introductory § 780.803 Basic conditions of exemption; first part, ginning of cotton...

29 CFR 780.803 - Basic conditions of exemption; first part, ginning of cotton.

Code of Federal Regulations, 2011 CFR

2011-07-01

... cotton. 780.803 Section 780.803 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet... Section 13(b)(15) Introductory § 780.803 Basic conditions of exemption; first part, ginning of cotton...

Quantitative trait loci analysis for net ginning energy requirements in upland cotton (Gossypium hirsutum L.)

USDA-ARS?s Scientific Manuscript database

Cotton cultivars with reduced fiber-seed attachment force have the potential to be ginned faster with less energy. The objective of this study was to identify quantitative trait loci (QTL) for net ginning energy (NGE) requirement, and its relationship with other fiber quality traits in upland cotton...

Seed Size, Ginning Rate, and Net Ginning Energy Requirement in Upland Cotton

USDA-ARS?s Scientific Manuscript database

Not much information is available in the literature on the effect of seed size on ginning efficiency in upland cotton. In 2015, nine diverse upland cotton cultivars and germplasm were planted at two locations in Stoneville, MS to test the above relationship. Two of the cultivars (Ark 9317-26 and DP ...

Evaluation of a mass flow sensor at a gin

USDA-ARS?s Scientific Manuscript database

As part of a system to optimize the cotton ginning process, a custom-built mass flow sensor was evaluated at USDA-ARS Cotton Ginning Research Unit at Stoneville, Mississippi. The mass flow sensor was fabricated based on the principle of the sensor patented by Thomasson and Sui. The optical and ele...

Battery condenser system total particulate emission factors and rates for cotton gins

USDA-ARS?s Scientific Manuscript database

This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

Battery condenser system PM10 emission factors and rates for cotton gins

USDA-ARS?s Scientific Manuscript database

This manuscript is part of a series of manuscripts that to characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study ...

Battery condenser system total particulate emission factors and rates for cotton gins: Method 17

USDA-ARS?s Scientific Manuscript database

This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

Equipment selection for recovering fiber from stripper harvested gin waste

USDA-ARS?s Scientific Manuscript database

Previous studies have shown the quantity of recoverable fibers with the potential to be marketed as motes approaches 10 to 25 percent of gin trash by weight. As a result of these findings and practical experience from a commercial cotton gin, questions arose as to the best equipment setup needed to ...

Comparison of a novel distillation method versus a traditional distillation method in a model gin system using liquid/liquid extraction.

PubMed

Greer, Derek; Pfahl, Les; Rieck, Jim; Daniels, Tim; Garza, Oscar

2008-10-08

This research studied a novel form of distillation (high vacuum distillation) as a method for preserving volatile aroma chemicals important to the organoleptic attributes of a four botanical model gin as well as the degradation products generated during the heating required in traditional methods of gin distillation. A 2 (5) factorial experiment was conducted in a partially confounded incomplete block design and analyzed using the PROC MIXED procedure from SAS. A model gin was made of dried juniper berries (Juniperus communis), coriander seed (Coriandrum sativum), angelica root (Angelica archangelica), and dry lemon peel (Citrus limonum). This was distilled on a traditional still utilizing atmospheric pressure and a heating mantel to initiate phase separation as well as a novel still (high vacuum) utilizing high vacuum pressures below 0.1 mmHg and temperatures below -15 degrees C to initiate phase separation. The degradation products (alpha-pinene, alpha-phellandrene, E-caryophyllene, and beta-myrcene) were present at greater levels (approximately 10 times) in the traditional still-made gin as compared to the novel gin.

Gastrointestinal nematode infection does not affect selection of tropical foliage by goats in a cafeteria trial.

PubMed

Ventura-Cordero, J; González-Pech, P G; Jaimez-Rodriguez, P R; Ortíz-Ocampo, G I; Sandoval-Castro, C A; Torres-Acosta, J F J

2017-01-01

It is important to determine whether gastrointestinal nematodes (GINs) affect foliage choice of goats leading to confirm the expression of a self-medication behavior. This study investigated the effect of GIN infection on tropical foliage selection by goats. During experimental stage 1 (10 days), goats had a natural mixed GIN infection, and at stage 2 (10 days), goats were treated with effective anthelmintics to maintain them free of GIN infection. During stage 1 the twelve adult goats (32 ± 2.3 kg live weight [LW]) were assigned to three groups (n = 4) according to their initial GIN infection status: HI group, with fecal egg count (FEC) between 1450 and 2150 eggs per g/feces (EPG); MI group, medium FEC (592-1167 EPG); and the NI group, free from GIN infection. Fresh foliage of four tropical plants were offered to goats ad libitum for 1 h daily: Gymnopodium floribundum (high condensed tannin [CT] content, 37-40 %), Mimosa bahamensis (medium CT content, 16-17 %), Leucaena leucocephala (low CT content, 3-5 %), and Viguiera dentata (negligible CT content, 0.6-0.9 %). Jacobs' selection indexes (JSIs) were estimated for the experimental foliage based on dry matter (DM), CT, or crude protein (CP) intake. During both study stages, individual fecal egg counts were estimated. The JSI patterns of different plant species, based on DM, CT, or CP, were similar irrespective of infection level during stage 1 (HI, MI, and NI) or no GIN infection (stage 2). Thus, irrespective of GIN infection, goats actively selected M. bahamensis (high CT, low CP content) and V. dentata (negligible CT, high CP content) but avoided G. floribundum (high CT, low CP content) and L. leucocephala (medium CT and high CP content). Thus, natural GIN infection did not influence goats' foliage selection.

Lack of commensal flora in H. pylori-infected INS-GAS mice reduces gastritis and delays intraepithelial neoplasia

PubMed Central

Lofgren, Jennifer L.; Whary, Mark T.; Ge, Zhongming; Muthupalani, Sureshkumar; Taylor, Nancy S.; Mobley, Melissa; Potter, Amanda; Varro, Andrea; Eibach, Daniel; Suerbaum, Sebastian; Wang, Timothy C.; Fox, James G.

2010-01-01

Background & Aims Transgenic, insulin–gastrin (INS–GAS) mice have high circulating levels of gastrin. On a FVB/N background, these mice develop spontaneous atrophic gastritis and gastrointestinal intraepithelial neoplasia (GIN) with 80% prevalence 6 months after Helicobacter pylori infection. GIN is associated with gastric atrophy and achlorhydria, predisposing mice to non-helicobacter microbiota overgrowth. We determined if germ-free INS–GAS mice spontaneously develop GIN and if H. pylori accelerates GIN in gnotobiotic INS–GAS mice. Methods We compared gastric lesions and levels of mRNA, serum inflammatory mediators, antibodies, and gastrin among germ-free and H. pylori-monoinfected INS-GAS mice. Microbiota composition of specific pathogen-free (SPF) INS-GAS mice was quantified by pyro-sequencing. Results Germ-free INS-GAS mice had mild hypergastrinemia but did not develop significant gastric lesions until they were 9 months old; they did not develop GIN through 13 months. H. pylori monoassociation caused progressive gastritis, epithelial defects, oxyntic gland atrophy, marked foveolar hyperplasia and dysplasia, and strong serum and tissue proinflammatory immune responses (particularly in male mice) between 5 and 11 months post infection (P<0.05, compared with germ-free controls). Only 2 of 26 female, whereas 8 of 18 male, H. pylori-infected INS-GAS mice developed low- to high-grade GIN by 11 months post infection. Stomachs of H. pylori-infected SPF male mice had significant reductions in Bacteroidetes and significant increases in Firmicutes. Conclusions Gastric lesions take 13 months longer to develop in germ-free INS–GAS mice than male SPF INS-GAS mice. H. pylori-monoassociation accelerated gastritis and GIN but caused less-severe gastric lesions and delayed onset of GIN compared to H. pylori-infected INS-GAS mice with complex gastric microbiota. Changes of gastric microbiota composition might promote GIN in the achlorhydric stomachs of SPF mice. PMID:20950613

Characterization of the MCM homohexamer from the thermoacidophilic euryarchaeon Picrophilus torridus

PubMed Central

Goswami, Kasturi; Arora, Jasmine; Saha, Swati

2015-01-01

The typical archaeal MCM exhibits helicase activity independently in vitro. This study characterizes MCM from the euryarchaeon Picrophilus torridus. While PtMCM hydrolyzes ATP in DNA-independent manner, it displays very poor ability to unwind DNA independently, and then too only under acidic conditions. The protein exists stably in complex with PtGINS in whole cell lysates, interacting directly with PtGINS under neutral and acidic conditions. GINS strongly activates MCM helicase activity, but only at low pH. In consonance with this, PtGINS activates PtMCM-mediated ATP hydrolysis only at low pH, with the amount of ATP hydrolyzed during the helicase reaction increasing more than fifty-fold in the presence of GINS. While the stimulation of MCM-mediated helicase activity by GINS has been reported in MCMs from P.furiosus, T.kodakarensis, and very recently, T.acidophilum, to the best of our knowledge, this is the first report of an MCM helicase demonstrating DNA unwinding activity only at such acidic pH, across all archaea and eukaryotes. PtGINS may induce/stabilize a conducive conformation of PtMCM under acidic conditions, favouring PtMCM-mediated DNA unwinding coupled to ATP hydrolysis. Our findings underscore the existence of divergent modes of replication regulation among archaea and the importance of investigating replication events in more archaeal organisms. PMID:25762096

Anthelmintic activity of Artemisia annua L. extracts in vitro and the effect of an aqueous extract and artemisinin in sheep naturally infected with gastrointestinal nematodes

USDA-ARS?s Scientific Manuscript database

There is no effective natural alternative control for gastrointestinal nematodes (GIN) of small ruminants, with Haemonchus contortus being the most economically important GIN. Despite frequent reports of multidrug-resistant GIN, there is no new commercial anthelmintic to substitute failing ones. Alt...

Using copper oxide wire particles or sericea lespedeza to prevent a peri-parturient rise of gastrointestinal nematodes in sheep and goats

USDA-ARS?s Scientific Manuscript database

Gastrointestinal nematodes (GIN) continue to plague the small ruminant industry, especially parts of the world with warm, humid climates. Alternatives to chemicals are needed for GIN control because of anthelmintic resistance of GIN and a desire to reduce chemical residues in meat products. A stud...

78 FR 56208 - Notice of Intent To Request Revision and Extension of a Currently Approved Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

... collection, the Cotton Ginning Survey. Revision to burden hours will be needed due to changes in the size of...) 690-2388. SUPPLEMENTARY INFORMATION: Title: Cotton Ginning Survey. OMB Control Number: 0535-0220... statistics related to agriculture and also to conduct the Census of Agriculture. The Cotton Ginning surveys...

Evaluation of an experimental mass-flow sensor of cotton-lint at the gin

USDA-ARS?s Scientific Manuscript database

As part of a system to optimize the cotton ginning process, a custom built mass-flow sensor was evaluated at USDA-ARS Cotton Ginning Research Unit at Stoneville, Mississippi. The mass-flow sensor was fabricated based on the principle of the senor patented by Thomasson and Sui (2004). The optical a...

Preliminary evaluation of feeder and lint slide moisture addition on ginning, fiber quality, and textile processing of western cotton

USDA-ARS?s Scientific Manuscript database

The objective of this study was to evaluate the effects of moisture addition at the gin stand feeder conditioning hopper and/or the battery condenser slide on gin performance and Western cotton fiber quality and textile processing. The test treatments included no moisture addition, feeder hopper hum...

Battery condenser system PM10 emission factors and rates for cotton gins: Method 201A PM10 sizing cyclones

USDA-ARS?s Scientific Manuscript database

This manuscript is part of a series of manuscripts that to characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study ...

76 FR 361 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... Time on Wednesday, January 12, 2011. Docket Numbers: ER11-2501-000. Applicants: Rolling Thunder I Power Partners, LLC. Description: Rolling Thunder I Power Partners, LLC submits tariff filing Per35.13(a)(2)(iii): MBR Tariff Filing of Rolling Thunder I Power Partners, LLC to be effective 11/21/2011. Filed Date: 12...

75 FR 57749 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... Time on Monday, October 4, 2010. Docket Numbers: ER10-2598-000. Applicants: Rolling Thunder I Power Partners, LLC. Description: Rolling Thunder I Power Partners, LLC submits tariff filing per 35.12: Baseline MBR Tariff Filing of Rolling Thunder I Power Partners, LLC to be effective 9/13/2010. Filed Date: 09...

Signal and power roll ring testing update

NASA Technical Reports Server (NTRS)

Smith, Dennis W.

1989-01-01

The development of the roll ring as a long-life, low-torque alternative to the slip ring is discussed. A roll ring consists of one or more circular flexures captured by their own spring force in the annular space between two concentric conductors or contact rings. The advantages of roll rings over other types of electrical transfer devices are: extremely low drag torque, high transfer efficiencies in high-power configurations, extremely low wear debris generation, long life, and low weight for high-power applications.

7 CFR 319.8-9 - Hull fiber and gin trash.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Hull fiber and gin trash. 319.8-9 Section 319.8-9 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION... Importation and Entry of Cotton and Covers § 319.8-9 Hull fiber and gin trash. (a) Entry of hull fiber will be...

How the early sporulation sigma factor sigmaF delays the switch to late development in Bacillus subtilis.

PubMed

Karmazyn-Campelli, Céline; Rhayat, Lamya; Carballido-López, Rut; Duperrier, Sandra; Frandsen, Niels; Stragier, Patrick

2008-03-01

Sporulation in Bacillus subtilis is a primitive differentiation process involving two cell types, the forespore and the mother cell. Each cell implements two successive transcription programmes controlled by specific sigma factors. We report that activity of sigma(G), the late forespore sigma factor, is kept in check by Gin, the product of csfB, a gene controlled by sigma(F), the early forespore sigma factor. Gin abolishes sigma(G) transcriptional activity when sigma(G) is artificially synthesized during growth, but has no effect on sigma(F). Gin interacts strongly with sigma(G) but not with sigma(F) in a yeast two-hybrid experiment. The absence of Gin allows sigma(G) to be active during sporulation independently of the mother-cell development to which it is normally coupled. Premature sigma(G) activity leads to the formation of slow-germinating spores, and complete deregulation of sigma(G) synthesis is lethal when combined with gin inactivation. Gin allows sigma(F) to delay the switch to the late forespore transcription programme by preventing sigma(G) to take over before the cell has reached a critical stage of development. A similar strategy, following a completely unrelated route, is used by the mother cell.

Rolling scheduling of electric power system with wind power based on improved NNIA algorithm

NASA Astrophysics Data System (ADS)

Xu, Q. S.; Luo, C. J.; Yang, D. J.; Fan, Y. H.; Sang, Z. X.; Lei, H.

2017-11-01

This paper puts forth a rolling modification strategy for day-ahead scheduling of electric power system with wind power, which takes the operation cost increment of unit and curtailed wind power of power grid as double modification functions. Additionally, an improved Nondominated Neighbor Immune Algorithm (NNIA) is proposed for solution. The proposed rolling scheduling model has further improved the operation cost of system in the intra-day generation process, enhanced the system’s accommodation capacity of wind power, and modified the key transmission section power flow in a rolling manner to satisfy the security constraint of power grid. The improved NNIA algorithm has defined an antibody preference relation model based on equal incremental rate, regulation deviation constraints and maximum & minimum technical outputs of units. The model can noticeably guide the direction of antibody evolution, and significantly speed up the process of algorithm convergence to final solution, and enhance the local search capability.

Alternative approaches for the control of gastrointestinal nematodes in sheep farming: a review.

PubMed

Šimpraga, Miljenko; Ljubičić, Iva; Hlede, Jadranka Pejaković; Vugrovečki, Ana Shek; Marinculić, Albert; Tkalčić, Suzana

2015-01-01

Gastrointestinal nematodes (GIN) are a serious health problem and represent the most significant constraint in sheep grazing operations. Problems tend to be worse in organic sheep farming systems, as a consequence of a less restricted access of animals to outdoor environment with a higher exposure to infective larvae. In domestic animals, GIN are effectively controlled by an aggressive prophylactic administration of commercially available anthelmintics. As a consequence to a common overdose and misuse of readily available antiparasitic treatments, there is an inevitable development of populations of GIN resistant to all major classes of anthelmintics. Also, the control of GIN that is based entirely on the anthelmintic use, threatens sustainability of the sheep farming worldwide. The combination of the optimized use of anthelmintic drugs and alternative approaches seem to be a reasonable choice in sustainable parasitic control programs that offer a substantial reduction of anthelmintic treatments and conservation of anthelmintic efficacy. In that aspect, a "targeted selective treatment (TST)" directed towards animals clinically diagnosed with GIN, seems to be an effective approach to leave some parasite populations unexposed to anthelmintics (refugia) and to reduce development of anthelmintic resistance. Also, many current research efforts aim to find and validate sustainable non-chemotherapeutic approaches to GIN control, including changes in grazing management, optimized nutrition, dietary supplementation, consumption of plants with anthelmintic properties, biological control by nematophagous fungi, copper oxide wire particles (COWP), and homeopathic treatments. This manuscript outlines (outlines) and discusses relevant alternative approaches for GIN control in modern sheep farming systems.

The Cdc45/RecJ-like protein forms a complex with GINS and MCM, and is important for DNA replication in Thermococcus kodakarensis

PubMed Central

Nagata, Mariko; Yamagami, Takeshi; Ogino, Hiromi; Simons, Jan-Robert; Kanai, Tamotsu; Atomi, Haruyuki

2017-01-01

Abstract The archaeal minichromosome maintenance (MCM) has DNA helicase activity, which is stimulated by GINS in several archaea. In the eukaryotic replicative helicase complex, Cdc45 forms a complex with MCM and GINS, named as CMG (Cdc45-MCM-GINS). Cdc45 shares sequence similarity with bacterial RecJ. A Cdc45/RecJ-like protein from Thermococcus kodakarensis shows a bacterial RecJ-like exonuclease activity, which is stimulated by GINS in vitro. Therefore, this archaeal Cdc45/RecJ is designated as GAN, from GINS-associated nuclease. In this study, we identified the CMG-like complex in T. kodakarensis cells. The GAN·GINS complex stimulated the MCM helicase, but MCM did not affect the nuclease activity of GAN in vitro. The gene disruption analysis showed that GAN was non-essential for its viability but the Δgan mutant did not grow at 93°C. Furthermore, the Δgan mutant showed a clear retardation in growth as compared with the parent cells under optimal conditions at 85°C. These deficiencies were recovered by introducing the gan gene encoding the nuclease deficient GAN protein back to the genome. These results suggest that the replicative helicase complex without GAN may become unstable and ineffective in replication fork progression. The nuclease activity of GAN is not related to the growth defects of the Δgan mutant cells. PMID:28977567

Improving the quality of health care: using international collaboration to inform guideline programmes by founding the Guidelines International Network (G-I-N)*

PubMed Central

Ollenschlager, G; Marshall, C; Qureshi, S; Rosenbrand, K; Burgers, J; Makela, M; Slutsky, J; t for

2004-01-01



 Clinical practice guidelines are regarded as powerful tools to achieve effective health care. Although many countries have built up experience in the development, appraisal, and implementation of guidelines, until recently there has been no established forum for collaboration at an international level. As a result, in different countries seeking similar goals and using similar strategies, efforts have been unnecessarily duplicated and opportunities for harmonisation lost because of the lack of a supporting organisational framework. This triggered a proposal in 2001 for an international guidelines network built on existing partnerships. A baseline survey confirmed a strong demand for such an entity. A multinational group of guideline experts initiated the development of a non-profit organisation aimed at promotion of systematic guideline development and implementation. The Guidelines International Network (G-I-N) was founded in November 2002. One year later the Network released the International Guideline Library, a searchable database which now contains more than 2000 guideline resources including published guidelines, guidelines under development, "guidelines for guidelines", training materials, and patient information tools. By June 2004, 52 organisations from 27 countries had joined the network including institutions from Oceania, North America, and Europe, and WHO. This paper describes the process that led to the foundation of the G-I-N, its characteristics, prime activities, and ideas on future projects and collaboration. PMID:15576708

Archaeal orthologs of Cdc45 and GINS form a stable complex that stimulates the helicase activity of MCM

PubMed Central

Xu, Yuli; Gristwood, Tamzin; Hodgson, Ben; Trinidad, Jonathan C.; Albers, Sonja-Verena; Bell, Stephen D.

2016-01-01

The regulated recruitment of Cdc45 and GINS is key to activating the eukaryotic MCM(2-7) replicative helicase. We demonstrate that the homohexameric archaeal MCM helicase associates with orthologs of GINS and Cdc45 in vivo and in vitro. Association of these factors with MCM robustly stimulates the MCM helicase activity. In contrast to the situation in eukaryotes, archaeal Cdc45 and GINS form an extremely stable complex before binding MCM. Further, the archaeal GINS•Cdc45 complex contains two copies of Cdc45. Our analyses give insight into the function and evolution of the conserved core of the archaeal/eukaryotic replisome. PMID:27821767

Archaeal orthologs of Cdc45 and GINS form a stable complex that stimulates the helicase activity of MCM.

PubMed

Xu, Yuli; Gristwood, Tamzin; Hodgson, Ben; Trinidad, Jonathan C; Albers, Sonja-Verena; Bell, Stephen D

2016-11-22

The regulated recruitment of Cdc45 and GINS is key to activating the eukaryotic MCM(2-7) replicative helicase. We demonstrate that the homohexameric archaeal MCM helicase associates with orthologs of GINS and Cdc45 in vivo and in vitro. Association of these factors with MCM robustly stimulates the MCM helicase activity. In contrast to the situation in eukaryotes, archaeal Cdc45 and GINS form an extremely stable complex before binding MCM. Further, the archaeal GINS•Cdc45 complex contains two copies of Cdc45. Our analyses give insight into the function and evolution of the conserved core of the archaeal/eukaryotic replisome.

Immunogenomics of gastrointestinal nematode infection in ruminants - breeding for resistance to produce food sustainably and safely.

PubMed

Sweeney, T; Hanrahan, J P; Ryan, M T; Good, B

2016-09-01

Gastrointestinal nematode (GIN) infection of ruminants represents a major health and welfare challenge for livestock producers worldwide. The emergence of anthelmintic resistance in important GIN species and the associated animal welfare concerns have stimulated interest in the development of alternative and more sustainable strategies aimed at the effective management of the impact of GINs. These integrative strategies include selective breeding using genetic/genomic tools, grazing management, biological control, nutritional supplementation, vaccination and targeted selective treatment. In this review, the logic of selecting for "resistance" to GIN infection as opposed to "resilience" or "tolerance" is discussed. This is followed by a review of the potential application of immunogenomics to genetic selection for animals that have the capacity to withstand the impact of GIN infection. Advances in relevant genomic technologies are highlighted together with how these tools can be advanced to support the integration of immunogenomic information into ruminant breeding programmes. © 2016 John Wiley & Sons Ltd.

Potential for escape of live boll weevils (Coleoptera: Curculionidae) into cottonseed, motes, and cleaned lint at the cotton gin.

PubMed

Sappington, Thomas W; Brashears, Alan D; Parajulee, Megha N; Carroll, Stanley C; Arnold, Mark D; Baker, Roy V

2004-12-01

Reintroductions of the boll weevil, Anthonomus grandis grandis Boheman, into areas of the United States where it has been eradicated or suppressed are very expensive to mitigate. There is concern that a cotton gin in an eradication zone may serve as a site of boll weevil reintroductions when processing cotton harvested in a neighboring infested zone. Similarly, there is a question whether weevil-free areas can safely import gin products, such as cottonseed and baled lint, from infested areas without risking an introduction. Many countries require fumigation of imported U.S. cotton bales to protect against boll weevil introductions, costing the U.S. cotton industry millions of dollars annually. In previously reported experiments, we quantified the potential for boll weevils to survive passage through precleaning machinery in the gin. In this study, we quantified survival potential of boll weevils passing through the gin stand and segregating into the cottonseed, mote, or lint fractions. We also examined boll weevil survival when passed with ginned lint through a lint cleaner. We present a flow chart of experimentally determined survival potentials of boll weevils passing through the various subprocesses of the gin, from which one can calculate the risk of a live boll weevil reaching any point in the process. Our data show that there is virtually no chance of a boll weevil being segregated alive into the cottonseed or of one surviving in the lint to approach the bale press. Therefore, quarantine or fumigation of cottonseed and cotton bales to guard against boll weevil introductions is unnecessary.

The Cdc45/RecJ-like protein forms a complex with GINS and MCM, and is important for DNA replication in Thermococcus kodakarensis.

PubMed

Nagata, Mariko; Ishino, Sonoko; Yamagami, Takeshi; Ogino, Hiromi; Simons, Jan-Robert; Kanai, Tamotsu; Atomi, Haruyuki; Ishino, Yoshizumi

2017-10-13

The archaeal minichromosome maintenance (MCM) has DNA helicase activity, which is stimulated by GINS in several archaea. In the eukaryotic replicative helicase complex, Cdc45 forms a complex with MCM and GINS, named as CMG (Cdc45-MCM-GINS). Cdc45 shares sequence similarity with bacterial RecJ. A Cdc45/RecJ-like protein from Thermococcus kodakarensis shows a bacterial RecJ-like exonuclease activity, which is stimulated by GINS in vitro. Therefore, this archaeal Cdc45/RecJ is designated as GAN, from GINS-associated nuclease. In this study, we identified the CMG-like complex in T. kodakarensis cells. The GAN·GINS complex stimulated the MCM helicase, but MCM did not affect the nuclease activity of GAN in vitro. The gene disruption analysis showed that GAN was non-essential for its viability but the Δgan mutant did not grow at 93°C. Furthermore, the Δgan mutant showed a clear retardation in growth as compared with the parent cells under optimal conditions at 85°C. These deficiencies were recovered by introducing the gan gene encoding the nuclease deficient GAN protein back to the genome. These results suggest that the replicative helicase complex without GAN may become unstable and ineffective in replication fork progression. The nuclease activity of GAN is not related to the growth defects of the Δgan mutant cells. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

77 FR 41177 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-12

... Energy, Inc., Rolling Thunder I Power Partners, LLC. Description: Updated market power analysis for Central region of BP Energy Company, Rolling Thunder I Power Partners, LLC, and Whiting Clean Energy, Inc...

Stimulation of plasmin activity in cultured human fibroblast cells by Porphyromonas endodontalis.

PubMed

Oikawa, T; Ogura, N; Akiba, M; Abiko, Y; Takiguchi, H; Izumi, H

1993-09-01

1. Plasmin activity in the conditioned medium of Gin-1 cells, a human gingival fibroblast cell line, was stimulated by Porphyromonas endodontalis, a putative pathogen of oral submucous abscesses, in a time- and dose-dependent manner. 2. P. endodontalis stimulated the activity of plasminogen activator in both the conditioned medium and the cell lysate. The plasminogen activator in Gin-1 cells was approx. 50 kDa by zymography. 3. The conditioned medium of Gin-1 cells exposed to P. endodontalis stimulated the conversion of human serum prekallikrein to kallikrein. 4. These results suggested that P. endodontalis stimulates the plasminogen activator-plasmin system in Gin-1 cells, and that activated plasmin plays a role in the progress of periodontal tissue inflammation.

Training mid-career internists to perform high-quality colonoscopy: a pilot training programme to meet increasing demands for colonoscopy.

PubMed

Shah-Ghassemzadeh, Nicole K; Jackson, Christian S; Juma, David; Strong, Richard M

2017-08-01

Colorectal cancer (CRC) is the second leading cause of cancer deaths in the USA. Despite a recent rise in CRC screening there remains an increasing demand for colonoscopy, yet a limited supply of gastroenterologists who can meet this need. To determine if a mid-career general internist (GIN) could be trained to perform high-quality colonoscopes via an intensive training programme. A GIN trained 2-3 days/week, 4-5 hours/day, for 7 months with an experienced gastroenterologist. Their independent performance was then compared with that of a gastroenterology attending (GA), with and without a gastroenterology fellow (GF). The primary outcome was to compare caecal intubation rates, adenoma detection rates (ADRs), interval CRC rates and complications between the three groups. 989 patients were initially included in the study, and 818 were included in the final analysis. Caecal intubation rates were 95%, 94% and 93% for the GIN, GA+GF and GA, respectively (p=0.31). The overall polyp detection rates were 68%, 39% and 44% among the GIN, GA+GF and GA, respectively (p<0.0001). The ADRs were 56%, 33% and 34% for the GIN, GA+GF and GA, respectively (p<0.0001). Three complications occurred, all within the GA group. No interval cancers were diagnosed within a 5-year surveillance period, across all three groups. The GIN attained high success rates in all quality measures. Training mid-career GINs to perform high-quality screening colonoscopes, through a standardised curriculum, may be a reasonable approach to address the growing demand for colonoscopists. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Protective effects of 6-Gingerol on vascular endothelial cell injury induced by high glucose via activation of PI3K-AKT-eNOS pathway in human umbilical vein endothelial cells.

PubMed

Liu, Dan; Wu, Mengqing; Lu, Yi; Xian, Tao; Wang, Yupeng; Huang, Bowei; Zeng, Guohua; Huang, Qiren

2017-09-01

6-Gingerol (6-Gin), an active constituent of Zingiber officinale, has been reported to have anti-inflammatory, anti-oxidative, anti-cancerous etc. bioactivities. However, little is known about its endothelial protective effects and the underlying mechanisms. In this study, our purpose was to investigate the protective effects of 6-Gin and its underlying mechanisms. HUVECs were exposed to high glucose (HG, 33mM glucose) for 48h, followed by 50μM 6-Gin with or without LY294002 (10μM), AKT inhibitor IV (0.5μM) or L-NAME (5mM) for another 24h. Cell viability, levels of NO, LDH and ROS were detected. In addition, the expression levels of IKK, IRS-1, PI3K, AKT, eNOS and their phosphorylated proteins were measured by western blots. Compared with the control, HUVECs were significantly impaired by HG, characterized by decreased levels of the cell viability, NO, pY458-PI3K, pS473-AKT and pS1177-eNOS while increased levels of LDH, pS176-IKK, and p-S312-IRS-1. Conversely, 6-Gin remarkably protected HUVECs against HG-induced injury in a concentration- and time-dependent manner. However, the protective effects of 6-Gin were abolished by co-treatment with LY294002, AKT inhibitor IV or L-NAME at the HG state. Collectively, 6-Gin attenuated the injury of HUVECs induced by HG through the activation of PI3K-AKT-eNOS signal pathway. The findings provide a novel potential for 6-Gin to prevent and treat the angiopathy resulting from diabetes mellitus. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Defensive Gin-Trap Closure Response of Tenebrionid Beetle, Zophobas atratus, Pupae

PubMed Central

Ichikawa, Toshio; Kurauchi, Toshiaki; Yamawaki, Yoshifumi

2012-01-01

Pupae of the beetle Zophobas atratus Fab. (Coleoptera: Tenebrionidae) have jaws called gin traps on the lateral margin of their jointed abdominal segments. When a weak tactile stimulation was applied to the intersegmental region between the two jaws of a gin trap in a resting pupa, the pupa rapidly closed and reopened single or multiple gin traps adjacent to the stimulated trap for 100200 ms. In response to a strong stimulation, a small or large rotation of the abdominal segments occurred after the rapid closure of the traps. Analyses of trajectory patterns of the last abdominal segment during the rotations revealed that the rotational responses were graded and highly variable with respect to the amplitudes of their horizontal and vertical components. The high variability of these rotational responses is in contrast with the low variability (or constancy) of abdominal rotations induced by the tactile stimulation of cephalic and thoracic appendages. Since the closed state of the gin traps lasts only for a fraction of a second, the response may mainly function to deliver a “painful” stimulus to an attacker rather than to cause serious damage. PMID:23448309

Defensive gin-trap closure response of tenebrionid beetle, Zophobas atratus, pupae.

PubMed

Ichikawa, Toshio; Kurauchi, Toshiaki; Yamawaki, Yoshifumi

2012-01-01

Pupae of the beetle Zophobas atratus Fab. (Coleoptera: Tenebrionidae) have jaws called gin traps on the lateral margin of their jointed abdominal segments. When a weak tactile stimulation was applied to the intersegmental region between the two jaws of a gin trap in a resting pupa, the pupa rapidly closed and reopened single or multiple gin traps adjacent to the stimulated trap for 100200 ms. In response to a strong stimulation, a small or large rotation of the abdominal segments occurred after the rapid closure of the traps. Analyses of trajectory patterns of the last abdominal segment during the rotations revealed that the rotational responses were graded and highly variable with respect to the amplitudes of their horizontal and vertical components. The high variability of these rotational responses is in contrast with the low variability (or constancy) of abdominal rotations induced by the tactile stimulation of cephalic and thoracic appendages. Since the closed state of the gin traps lasts only for a fraction of a second, the response may mainly function to deliver a "painful" stimulus to an attacker rather than to cause serious damage.

Geosciences Information Network (GIN): A modular, distributed, interoperable data network for the geosciences

NASA Astrophysics Data System (ADS)

Allison, M.; Gundersen, L. C.; Richard, S. M.; Dickinson, T. L.

2008-12-01

A coalition of the state geological surveys (AASG), the U.S. Geological Survey (USGS), and partners will receive NSF funding over 3 years under the INTEROP solicitation to start building the Geoscience Information Network (www.geoinformatics.info/gin) a distributed, interoperable data network. The GIN project will develop standardized services to link existing and in-progress components using a few standards and protocols, and work with data providers to implement these services. The key components of this network are 1) catalog system(s) for data discovery; 2) service definitions for interfaces for searching catalogs and accessing resources; 3) shared interchange formats to encode information for transmission (e.g. various XML markup languages); 4) data providers that publish information using standardized services defined by the network; and 5) client applications adapted to use information resources provided by the network. The GIN will integrate and use catalog resources that currently exist or are in development. We are working with the USGS National Geologic Map Database's existing map catalog, with the USGS National Geological and Geophysical Data Preservation Program, which is developing a metadata catalog (National Digital Catalog) for geoscience information resource discovery, and with the GEON catalog. Existing interchange formats will be used, such as GeoSciML, ChemML, and Open Geospatial Consortium sensor, observation and measurement MLs. Client application development will be fostered by collaboration with industry and academic partners. The GIN project will focus on the remaining aspects of the system -- service definitions and assistance to data providers to implement the services and bring content online - and on system integration of the modules. Initial formal collaborators include the OneGeology-Europe consortium of 27 nations that is building a comparable network under the EU INSPIRE initiative, GEON, Earthchem, and GIS software company ESRI. OneGeology-Europe and GIN have agreed to integrate their networks, effectively adopting global standards among geological surveys that are available across the entire field. ESRI is creating a Geology Data Model for ArcGIS software to be compatible with GIN, and other companies are expressing interest in adapting their services, applications, and clients to take advantage of the large data resources planned to become available through GIN.

Amputations

MedlinePlus

... powered and non-powered conveyors, printing presses, roll-forming and roll- bending machines, food slicers, meat grinders, ... processing machines, paper products machines, woodworking machines, metal-forming machines, and meat slicers. How can I get ...

Just enough inflation: power spectrum modifications at large scales

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cicoli, Michele; Downes, Sean; Dutta, Bhaskar

2014-12-01

We show that models of 'just enough' inflation, where the slow-roll evolution lasted only 50- 60 e-foldings, feature modifications of the CMB power spectrum at large angular scales. We perform a systematic analytic analysis in the limit of a sudden transition between any possible non-slow-roll background evolution and the final stage of slow-roll inflation. We find a high degree of universality since most common backgrounds like fast-roll evolution, matter or radiation-dominance give rise to a power loss at large angular scales and a peak together with an oscillatory behaviour at scales around the value of the Hubble parameter at themore » beginning of slow-roll inflation. Depending on the value of the equation of state parameter, different pre-inflationary epochs lead instead to an enhancement of power at low ℓ, and so seem disfavoured by recent observational hints for a lack of CMB power at ℓ∼< 40. We also comment on the importance of initial conditions and the possibility to have multiple pre-inflationary stages.« less

VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW WEST, 1ST FLOOR, EAST ROOM, HYDRAULIC COTTON PRESS, DETAIL, CONTINENTAL GIN COMPANY HYDRAULIC TANK - Magnolia Plantation, Cotton Gins & Presses, LA Route 119, Natchitoches, Natchitoches Parish, LA

Cotton-textile-enabled flexible self-sustaining power packs via roll-to-roll fabrication

PubMed Central

Gao, Zan; Bumgardner, Clifton; Song, Ningning; Zhang, Yunya; Li, Jingjing; Li, Xiaodong

2016-01-01

With rising energy concerns, efficient energy conversion and storage devices are required to provide a sustainable, green energy supply. Solar cells hold promise as energy conversion devices due to their utilization of readily accessible solar energy; however, the output of solar cells can be non-continuous and unstable. Therefore, it is necessary to combine solar cells with compatible energy storage devices to realize a stable power supply. To this end, supercapacitors, highly efficient energy storage devices, can be integrated with solar cells to mitigate the power fluctuations. Here, we report on the development of a solar cell-supercapacitor hybrid device as a solution to this energy requirement. A high-performance, cotton-textile-enabled asymmetric supercapacitor is integrated with a flexible solar cell via a scalable roll-to-roll manufacturing approach to fabricate a self-sustaining power pack, demonstrating its potential to continuously power future electronic devices. PMID:27189776

Experimental investigation on the electrical contact behavior of rolling contact connector.

PubMed

Chen, Junxing; Yang, Fei; Luo, Kaiyu; Zhu, Mingliang; Wu, Yi; Rong, Mingzhe

2015-12-01

Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigate the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.

CDC-48/p97 coordinates CDT-1 degradation with GINS chromatin dissociation to ensure faithful DNA replication.

PubMed

Franz, André; Orth, Michael; Pirson, Paul A; Sonneville, Remi; Blow, J Julian; Gartner, Anton; Stemmann, Olaf; Hoppe, Thorsten

2011-10-07

Faithful transmission of genomic information requires tight spatiotemporal regulation of DNA replication factors. In the licensing step of DNA replication, CDT-1 is loaded onto chromatin to subsequently promote the recruitment of additional replication factors, including CDC-45 and GINS. During the elongation step, the CDC-45/GINS complex moves with the replication fork; however, it is largely unknown how its chromatin association is regulated. Here, we show that the chaperone-like ATPase CDC-48/p97 coordinates degradation of CDT-1 with release of the CDC-45/GINS complex. C. elegans embryos lacking CDC-48 or its cofactors UFD-1/NPL-4 accumulate CDT-1 on mitotic chromatin, indicating a critical role of CDC-48 in CDT-1 turnover. Strikingly, CDC-48(UFD-1/NPL-4)-deficient embryos show persistent chromatin association of CDC-45/GINS, which is a consequence of CDT-1 stabilization. Moreover, our data confirmed a similar regulation in Xenopus egg extracts, emphasizing a conserved coordination of licensing and elongation events during eukaryotic DNA replication by CDC-48/p97. Copyright © 2011 Elsevier Inc. All rights reserved.

3. Historic American Buildings Survey E. W. Russell, Photographer, June ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Historic American Buildings Survey E. W. Russell, Photographer, June 19, 1936 OLD MULE GIN HOUSE LOOKING S. E. - Cotton Gin & Well Sweep, Cliatt Plantation, State Route 165, Cottonton, Russell County, AL

1. Historic American Buildings Survey E. W. Russell, Photographer, June ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Historic American Buildings Survey E. W. Russell, Photographer, June 19, 1936 OLD MULE GIN HOUSE LOOKING N. W. - Cotton Gin & Well Sweep, Cliatt Plantation, State Route 165, Cottonton, Russell County, AL

75 FR 3459 - Combined Notice of Filings # 1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-21

.... Docket Numbers: ER10-276-001. Applicants: Rolling Thunder I Power Partners, LLC. Description: Rolling Thunder I Power Partners, LLC supplements its 11/17/09 application for a proposed market-based rate...

Auditory Temporal Processing Deficits in Chronic Stroke: A Comparison of Brain Damage Lateralization Effect.

PubMed

Jafari, Zahra; Esmaili, Mahdiye; Delbari, Ahmad; Mehrpour, Masoud; Mohajerani, Majid H

2016-06-01

There have been a few reports about the effects of chronic stroke on auditory temporal processing abilities and no reports regarding the effects of brain damage lateralization on these abilities. Our study was performed on 2 groups of chronic stroke patients to compare the effects of hemispheric lateralization of brain damage and of age on auditory temporal processing. Seventy persons with normal hearing, including 25 normal controls, 25 stroke patients with damage to the right brain, and 20 stroke patients with damage to the left brain, without aphasia and with an age range of 31-71 years were studied. A gap-in-noise (GIN) test and a duration pattern test (DPT) were conducted for each participant. Significant differences were found between the 3 groups for GIN threshold, overall GIN percent score, and DPT percent score in both ears (P ≤ .001). For all stroke patients, performance in both GIN and DPT was poorer in the ear contralateral to the damaged hemisphere, which was significant in DPT and in 2 measures of GIN (P ≤ .046). Advanced age had a negative relationship with temporal processing abilities for all 3 groups. In cases of confirmed left- or right-side stroke involving auditory cerebrum damage, poorer auditory temporal processing is associated with the ear contralateral to the damaged cerebral hemisphere. Replication of our results and the use of GIN and DPT tests for the early diagnosis of auditory processing deficits and for monitoring the effects of aural rehabilitation interventions are recommended. Copyright © 2016 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Large Scale Triboelectric Nanogenerator and Self-Powered Pressure Sensor Array Using Low Cost Roll-to-Roll UV Embossing

PubMed Central

Dhakar, Lokesh; Gudla, Sudeep; Shan, Xuechuan; Wang, Zhiping; Tay, Francis Eng Hock; Heng, Chun-Huat; Lee, Chengkuo

2016-01-01

Triboelectric nanogenerators (TENGs) have emerged as a potential solution for mechanical energy harvesting over conventional mechanisms such as piezoelectric and electromagnetic, due to easy fabrication, high efficiency and wider choice of materials. Traditional fabrication techniques used to realize TENGs involve plasma etching, soft lithography and nanoparticle deposition for higher performance. But lack of truly scalable fabrication processes still remains a critical challenge and bottleneck in the path of bringing TENGs to commercial production. In this paper, we demonstrate fabrication of large scale triboelectric nanogenerator (LS-TENG) using roll-to-roll ultraviolet embossing to pattern polyethylene terephthalate sheets. These LS-TENGs can be used to harvest energy from human motion and vehicle motion from embedded devices in floors and roads, respectively. LS-TENG generated a power density of 62.5 mW m−2. Using roll-to-roll processing technique, we also demonstrate a large scale triboelectric pressure sensor array with pressure detection sensitivity of 1.33 V kPa−1. The large scale pressure sensor array has applications in self-powered motion tracking, posture monitoring and electronic skin applications. This work demonstrates scalable fabrication of TENGs and self-powered pressure sensor arrays, which will lead to extremely low cost and bring them closer to commercial production. PMID:26905285

ARS labs update to California Cotton Ginners and Growers

USDA-ARS?s Scientific Manuscript database

There are four USDA-ARS labs involved in cotton harvesting, processing & fiber quality research; The Southwestern Cotton Ginning Research Laboratory (Mesilla Park, NM); The Cotton Production and Processing Unit (Lubbock, TX); The Cotton Ginning Research Unit (Stoneville, MS); and The Cotton Structur...

75 FR 47780 - Stainless Steel Sheet and Strip in Coils From Mexico; Preliminary Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-09

... list of uses is illustrative and provided for descriptive purposes only. \\8\\ ``GIN4 Mo,'' ``GIN5'' and... elements which would indicate a reasonable correlation between the underlying costs and the final sales...

Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz.

PubMed

Park, Hyejin; Kang, Hwiwon; Lee, Yonggil; Park, Yongsu; Noh, Jinsoo; Cho, Gyoujin

2012-08-31

Wireless power transmission to inexpensive and disposable smart electronic devices is one of the key issues for the realization of a ubiquitous society where sensor networks such as RFID tags, price tags, smart logos, signage and sensors could be fully interconnected and utilized by DC power of less than 0.3 W. This DC power can be provided by inductively coupled AC from a 13.56 MHz power transmitter through a rectenna, consisting of an antenna, a diode and a capacitor, which would be cheap to integrate with inexpensive smart electronic devices. To integrate the rectenna with a minimum cost, a roll-to-roll (R2R) gravure printing process has been considered to print the rectenna on plastic foils. In this paper, R2R gravure printing systems including printing condition and four different nanoparticle based inks will be reported to print the rectenna (antenna, diode and capacitor) on plastic foils at a printing speed of 8 m min(-1) and more than 90% device yield for a wireless power transmission of 0.3 W using a standard 13.56 MHz power transmitter.

Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz

NASA Astrophysics Data System (ADS)

Park, Hyejin; Kang, Hwiwon; Lee, Yonggil; Park, Yongsu; Noh, Jinsoo; Cho, Gyoujin

2012-08-01

Wireless power transmission to inexpensive and disposable smart electronic devices is one of the key issues for the realization of a ubiquitous society where sensor networks such as RFID tags, price tags, smart logos, signage and sensors could be fully interconnected and utilized by DC power of less than 0.3 W. This DC power can be provided by inductively coupled AC from a 13.56 MHz power transmitter through a rectenna, consisting of an antenna, a diode and a capacitor, which would be cheap to integrate with inexpensive smart electronic devices. To integrate the rectenna with a minimum cost, a roll-to-roll (R2R) gravure printing process has been considered to print the rectenna on plastic foils. In this paper, R2R gravure printing systems including printing condition and four different nanoparticle based inks will be reported to print the rectenna (antenna, diode and capacitor) on plastic foils at a printing speed of 8 m min-1 and more than 90% device yield for a wireless power transmission of 0.3 W using a standard 13.56 MHz power transmitter.

29 CFR 570.59 - Occupations involved in the operation of power-driven metal forming, punching, and shearing...

Code of Federal Regulations, 2011 CFR

2011-07-01

... beading, straightening, corrugating, flanging, or bending rolls; and hot or cold rolling mills. (ii) All... area between the dies; power presses; and plate punches. (iii) All bending machines, such as apron...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Junxing; Yang, Fei, E-mail: yfei2007@mail.xjtu.edu.cn; Luo, Kaiyu

Rolling contact connector (RCC) is a new technology utilized in high performance electric power transfer systems with one or more rotating interfaces, such as radars, satellites, wind generators, and medical computed tomography machines. Rolling contact components are used in the RCC instead of traditional sliding contacts to transfer electrical power and/or signal. Since the requirement of the power transmission is increasing in these years, the rolling electrical contact characteristics become more and more important for the long-life design of RCC. In this paper, a typical form of RCC is presented. A series of experimental work are carried out to investigatemore » the rolling electrical contact characteristics during its lifetime. The influence of a variety of factors on the electrical contact degradation behavior of RCC is analyzed under both vacuum and air environment. Based on the surface morphology and elemental composition changes in the contact zone, which are assessed by field emission scanning electron microscope and confocal laser scanning microscope, the mechanism of rolling electrical contact degradation is discussed.« less

Attitude maneuvers of a solar-powered electric orbital transfer vehicle

NASA Astrophysics Data System (ADS)

Jenkin, Alan B.

1992-08-01

Attitude maneuver requirements of a solar-powered electric orbital transfer vehicle have been studied in detail. This involved evaluation of the yaw, pitch, and roll profiles and associated angular accelerations needed to simultaneously steer the vehicle thrust vector and maintain the solar array pointed toward the sun. Maintaining the solar array pointed exactly at the sun leads to snap roll maneuvers which have very high (theoretically unbounded) accelerations, thereby imposing large torque requirements. The problem is exacerbated by the large solar arrays which are needed to generate the high levels of power needed by electric propulsion devices. A method of eliminating the snap roll maneuvers is presented. The method involves the determination of relaxed roll profiles which approximate a forced transition between alternate exact roll profiles and incur only small errors in solar array pointing. The method makes it feasible to perform the required maneuvers using currently available attitude control technology such as reaction wheels, hot gas jets, or gimballed main engines.

78 FR 38226 - Sulfoxaflor; Pesticide Tolerances; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... and removing Sec. 180.670. This document additionally removes the time-limited tolerances for cotton, undelinted seed; cotton, gin byproducts; and cotton, hulls as the tolerances have been superseded by...-limited tolerances for cotton, undelinted seed; cotton, gin byproducts; and cotton, hulls contained in...

Economics of oversized cyclones in the cotton ginning industry

USDA-ARS?s Scientific Manuscript database

Cost of reducing pollution to meet increasingly stringent air quality standards particularly for the U.S. cotton ginning industry is rising overtime. Most industry participants use cyclones to control air pollutants. These cyclones have no moving parts and their initial investment costs are relative...

Multibar sawless lint cleaner: Field testing results

USDA-ARS?s Scientific Manuscript database

The Multibar Sawless Lint Cleaner (MBSLC) is a prototype spiked-tooth lint cleaner initially designed to replace the first stage lint cleaning in a cotton gin. Previous studies conducted in the ginning laboratory in Lubbock, Texas, demonstrated improvements in some fiber properties, as well as minim...

Assessment of some diterpenoids in commercial distilled gin.

PubMed

Vichi, Stefania; Aumatell, Montserrat Riu; Buxaderas, Susana; López-Tamames, Elvira

2008-11-03

In the present study the qualitative and quantitative determination of diterpenoids in commercial distilled gin was carried out. This widely consumed juniper-based spirit is aromatized using Juniper (Juniperus communis) berries. Although juniper reportedly contains several diterpenic compounds, no studies have addressed the diterpenic composition of juniper-based spirits or beverages. With this objective, here we followed a multilevel factorial experimental design to optimize a direct immersion-solid phase microextraction (DI-SPME) method coupled to gas chromatography/mass spectrometry and analyzed eight commercial brands of gin. With total concentrations ranging from 10 to 190 microg L(-1), manool, manoyl oxide and trans-totarol were the most abundant diterpenoids of the 10 identified or tentatively identified at variable but not negligible concentrations in the distilled gin samples. The diterpenic composition allowed the brands to be differentiated. This indicates that these compounds contribute to the sensory characteristics of the distinct commercial brands, thus guaranteeing the authenticity and consequently the quality of the product.

GINS complex protein Sld5 recruits SIK1 to activate MCM helicase during DNA replication.

PubMed

Joshi, Kiranmai; Shah, Varun Jayeshkumar; Maddika, Subbareddy

2016-12-01

In eukaryotes, proper loading and activation of MCM helicase at chromosomal origins plays a central role in DNA replication. Activation of MCM helicase requires its association with CDC45-GINS complex, but the mechanism of how this complex activates MCM helicase is poorly understood. Here we identified SIK1 (salt-inducible kinase 1), an AMPK related protein kinase, as a molecular link that connects GINS complex with MCM helicase activity. We demonstrated that Sld5 a component of GINS complex interacts with SIK1 and recruits it to the sites of DNA replication at the onset of S phase. Depletion of SIK1 leads to defective DNA replication. Further, we showed that SIK1 phosphorylates MCM2 at five conserved residues at its N-terminus, which is essential for the activation of MCM helicase. Collectively, our results suggest SIK1 as a novel integral component of CMG replicative helicase during eukaryotic DNA replication. Copyright © 2016 Elsevier Inc. All rights reserved.

Large transient fault current test of an electrical roll ring

NASA Technical Reports Server (NTRS)

Yenni, Edward J.; Birchenough, Arthur G.

1992-01-01

The space station uses precision rotary gimbals to provide for sun tracking of its photoelectric arrays. Electrical power, command signals and data are transferred across the gimbals by roll rings. Roll rings have been shown to be capable of highly efficient electrical transmission and long life, through tests conducted at the NASA Lewis Research Center and Honeywell's Satellite and Space Systems Division in Phoenix, AZ. Large potential fault currents inherent to the power system's DC distribution architecture, have brought about the need to evaluate the effects of large transient fault currents on roll rings. A test recently conducted at Lewis subjected a roll ring to a simulated worst case space station electrical fault. The system model used to obtain the fault profile is described, along with details of the reduced order circuit that was used to simulate the fault. Test results comparing roll ring performance before and after the fault are also presented.

Non chemical control of helminths in ruminants: adapting solutions for changing worms in a changing world.

PubMed

Hoste, H; Torres-Acosta, J F J

2011-08-04

Infections with gastrointestinal nematodes (GIN) remain a major threat for ruminant production, health and welfare associated with outdoor breeding. The control of these helminth parasites has relied on the strategic or tactical use of chemical anthelmintic (AH) drugs. However, the expanding development and diffusion of anthelmintic resistance in nematode populations imposes the need to explore and validate novel solutions (or to re-discover old knowledge) for a more sustainable control of GIN. The different solutions refer to three main principles of action. The first one is to limit the contact between the hosts and the infective larvae in the field through grazing management methods. The latter were described since the 1970s and, at present, they benefit from innovations based on computer models. Several biological control agents have also been studied in the last three decades as potential tools to reduce the infective larvae in the field. The second principle aims at improving the host response against GIN infections relying on the genetic selection between or within breeds of sheep or goats, crossbreeding of resistant and susceptible breeds and/or the manipulation of nutrition. These approaches may benefit from a better understanding of the potential underlying mechanisms, in particular in regard of the host immune response against the worms. The third principle is the control of GIN based on non-conventional AH materials (plant or mineral compounds). Worldwide studies show that non conventional AH materials can eliminate worms and/or negatively affect the parasite's biology. The recent developments and pros and cons concerning these various options are discussed. Last, some results are presented which illustrate how the integration of these different solutions can be efficient and applicable in different systems of production and/or epidemiological conditions. The integration of different control tools seems to be a pre-requisite for the sustainable management of GIN infections. This new era of GIN management requires a new paradigm: to achieve enough control to reduce the negative impact of GIN infections enabling an optimum level of production, health and welfare. Copyright © 2011 Elsevier B.V. All rights reserved.

CMB quadrupole depression produced by early fast-roll inflation: Monte Carlo Markov chains analysis of WMAP and SDSS data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Destri, C.; Vega, H. J. de; Observatoire de Paris, LERMA, Laboratoire Associe au CNRS UMR 8112, 61, Avenue de l'Observatoire, 75014 Paris

Generically, the classical evolution of the inflaton has a brief fast-roll stage that precedes the slow-roll regime. The fast-roll stage leads to a purely attractive potential in the wave equations of curvature and tensor perturbations (while the potential is purely repulsive in the slow-roll stage). This attractive potential leads to a depression of the CMB quadrupole moment for the curvature and B-mode angular power spectra. A single new parameter emerges in this way in the early universe model: the comoving wave number k{sub 1} characteristic scale of this attractive potential. This mode k{sub 1} happens to exit the horizon preciselymore » at the transition from the fast-roll to the slow-roll stage. The fast-roll stage dynamically modifies the initial power spectrum by a transfer function D(k). We compute D(k) by solving the inflaton evolution equations. D(k) effectively suppresses the primordial power for k

Design of starch coated seed cotton dryers

USDA-ARS?s Scientific Manuscript database

A model was developed for the design and analysis of a high temperature tunnel dryer, primarily used with a new cotton ginning product, EASIflo ® cottonseed (starch-coated cottonseed). This form of cottonseed has emerged as a viable, value-added product for the cotton ginning industry. Currently, li...

Pneumatic Conveying of Seed Cotton: Minimum Velocity and Pressure Drop

USDA-ARS?s Scientific Manuscript database

Electricity is major cost for cotton gins, representing approximately 20% of the industry’s variable costs. Fans used for pneumatic conveying consume the majority of electricity at cotton gins. Development of control systems to reduce the air velocity used for conveying seed cotton could significant...

Pneumatic Conveying of Seed Cotton: Minimum Velocity and Pressure Drop

USDA-ARS?s Scientific Manuscript database

Electricity is a major cost for cotton gins, representing approximately 20% of variable costs. Fans used for pneumatic conveying consume the majority of electricity at cotton gins. Development of control systems to reduce the air velocity used for conveying seed cotton could significantly decrease e...

100 Years of Cotton Production, Harvesting and Ginning Systems Engineering: 1907 - 2007

USDA-ARS?s Scientific Manuscript database

The American Society of Agricultural and Biological Engineers (ASABE) celebrated its centennial year during 2007. As part of the ASABE centennial, the authors were asked to describe agricultural engineering accomplishments in U.S. cotton production, harvesting and ginning over the past 100 years. ...

27 CFR 19.487 - Kind of spirits.

Code of Federal Regulations, 2011 CFR

2011-04-01

... characteristics generally attributed to whisky, brandy, rum, or gin, and which are substantially neutral in..., and other characteristics generally attributed to whisky, brandy, rum, or gin. However, the proprietor... proprietor may designate as “Whisky” spirits distilled at not more than 160 proof from a fermented mash of...

Measuring changes in aerodynamic/rolling resistances by cycle-mounted power meters.

PubMed

Lim, Allen C; Homestead, Eric P; Edwards, Andrew G; Carver, Todd C; Kram, Rodger; Byrnes, William C

2011-05-01

To develop a protocol for isolating changes in aerodynamic and rolling resistances from field-based measures of power and velocity during level bicycling. We assessed the effect of body position (hands on brake hoods vs drops) and tire pressure changes (414 vs 828 kPa) on aerodynamic and rolling resistances by measuring the power (Pext)-versus-speed (V) relationship using commercially available bicycle-mounted power meters. Measurements were obtained using standard road bicycles in calm wind (<1.0 m·s) conditions at constant velocities (acceleration <0.5 m·s) on a flat 200-m section of a smooth asphalt road. For each experimental condition, experienced road cyclists rode in 50-W increments from 100 to 300 W for women (n=2) or 100 to 400 W for men (n=6). Aerodynamic resistance per velocity squared (k) was calculated as the slope of a linear plot of tractive resistance (RT=power/velocity) versus velocity squared. Rolling resistance (Rr) was calculated as the intercept of this relationship. Aerodynamic resistance per velocity squared (k) was significantly greater (P<0.05) while riding on the brake hoods compared with the drops (mean ± SD: 0.175 ± 0.025 vs 0.155 ± 0.03 N·V). Rolling resistance was significantly greater at 60 psi compared with 120 psi (5.575 ± 0.695 vs 4.215 ± 0.815 N). These results demonstrate that commercially available power meters are sensitive enough to independently detect the changes in aerodynamic and rolling resistances associated with modest changes in body position and substantial changes in tire pressure. © 2011 by the American College of Sports Medicine

Genetic line comparisons and genetic parameters for endoparasite infections and test-day milk production traits.

PubMed

May, Katharina; Brügemann, Kerstin; Yin, Tong; Scheper, Carsten; Strube, Christina; König, Sven

2017-09-01

Keeping dairy cows in grassland systems relies on detailed analyses of genetic resistance against endoparasite infections, including between- and within-breed genetic evaluations. The objectives of this study were (1) to compare different Black and White dairy cattle selection lines for endoparasite infections and (2) the estimation of genetic (co)variance components for endoparasite and test-day milk production traits within the Black and White cattle population. A total of 2,006 fecal samples were taken during 2 farm visits in summer and autumn 2015 from 1,166 cows kept in 17 small- and medium-scale organic and conventional German grassland farms. Fecal egg counts were determined for gastrointestinal nematodes (FEC-GIN) and flukes (FEC-FLU), and fecal larvae counts for the bovine lungworm Dictyocaulus viviparus (FLC-DV). The lowest values for gastrointestinal nematode infections were identified for genetic lines adopted to pasture-based production systems, especially selection lines from New Zealand. Heritabilities were low for FEC-GIN (0.05-0.06 ± 0.04) and FLC-DV (0.05 ± 0.04), but moderate for FEC-FLU (0.33 ± 0.06). Almost identical heritabilities were estimated for different endoparasite trait transformations (log-transformation, square root). The genetic correlation between FEC-GIN and FLC-DV was 1.00 ± 0.60, slightly negative between FEC-GIN and FEC-FLU (-0.10 ± 0.27), and close to zero between FLC-DV and FEC-FLU (0.03 ± 0.30). Random regression test-day models on a continuous time scale [days in milk (DIM)] were applied to estimate genetic relationships between endoparasite and longitudinal test-day production traits. Genetic correlations were negative between FEC-GIN and milk yield (MY) until DIM 85, and between FEC-FLU and MY until DIM 215. Genetic correlations between FLC-DV and MY were negative throughout lactation, indicating improved disease resistance for high-productivity cows. Genetic relationships between FEC-GIN and FEC-FLU with milk protein content were negative for all DIM. Apart from the very early and very late lactation stage, genetic correlations between FEC-GIN and milk fat content were negative, whereas they were positive for FEC-FLU. Genetic correlations between FEC-GIN and somatic cell score were positive, indicating similar genetic mechanisms for susceptibility to udder and endoparasite infections. The moderate heritabilities for FEC-FLU suggest inclusion of FEC-FLU into overall organic dairy cattle breeding goals to achieve long-term selection response for disease resistance. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Gin saw wear test

USDA-ARS?s Scientific Manuscript database

Most current gin saw manufacturers use a 1074 steel or similar as a basis to manufacture their saw blades. The saw teeth are individually punched on the edges of the blades and then the blade goes through a heat treating process prior to use. There are indications from other industries with similar ...

Absolute moisture sensing for cotton bales

USDA-ARS?s Scientific Manuscript database

With the recent prevalence of moisture restoration systems in cotton gins, more and more gins are putting moisture back into the bales immediately before the packaging operation. There are two main reasons for this recent trend, the first is that it has been found that added moisture at the bale pre...

Preliminary evaluation of AERMOD using site specific stack and ambient sampling data

USDA-ARS?s Scientific Manuscript database

A cotton ginning industry-supported project was initiated in 2008 to develop a robust particulate matter (PM) dispersion modeling dataset that could be used for evaluating current and future PM dispersion models. This paper compares total PM data collected by the industry-supported study at one gin ...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

Effecting Affection: The Corporeal Ethics of Gins and Arakawa

ERIC Educational Resources Information Center

Bearn, Gordon C. F.

2010-01-01

This paper argues for the educational relevance of the apparently unbelievable project of the architects Arakawa and Gins to design houses that would grant their inhabitants immortality. First, the author demonstrates that, broadly conceived, this is a familiar philosophical project, perhaps "the" philosophical project. He then produces a reading…

Effect of ram semen extenders and supplements on computer assisted sperm analysis parameters

USDA-ARS?s Scientific Manuscript database

Gastrointestinal nematode (GIN) infection of lambs is a major health issue that can cause anemia, reduced weight gains, poor performance, mortality and discouragement to farmers. Anthelmintic resistance limits the control of GIN by available dewormers, and most alternatives to dewormers have some dr...

Effects of Gin Machinery on Cotton Quality

USDA-ARS?s Scientific Manuscript database

Ginning practices affect both the economic returns to cotton producers and the quality of fiber produced for textile mills and, ultimately, consumers. Because of the recent shift from a primarily domestic to an export market for U.S. cotton and the loss of textile market share to synthetic fibers, p...

Efficacy of compound X (Bedoukian Research) on reducing fecal egg count in lambs

USDA-ARS?s Scientific Manuscript database

Gastrointestinal nematode (GIN) parasites are a major constraint to profitable sheep production. Due to long-term use of anthelmintics, GIN populations have developed resistance to those available. The objective of this study was to determine the efficacy of a proprietary compound developed by Bedou...

77 FR 59561 - Sulfoxaflor; Pesticide Tolerances for Emergency Exemptions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... metabolites and degradates in or on cotton, undelinted seed; cotton, gin byproducts; and cotton, hulls. This... Insecticide, Fungicide, and Rodenticide Act (FIFRA) authorizing use of the pesticide on cotton. This... or on cotton, undelinted seed at 0.2 parts per million (ppm); cotton, gin byproducts at 6.0 ppm; and...

75 FR 35437 - Notice of Intent To Request Revision and Extension of a Currently Approved Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-22

... (NASS) to request revision and extension of a currently approved information collection, the Cotton... from David Hancock, NASS Clearance Officer, at (202) 690-2388. SUPPLEMENTARY INFORMATION: Title: Cotton... conduct the Census of Agriculture. The Cotton Ginning surveys provide cotton ginning statistics from...

27 CFR 19.597 - Kind of spirits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... attributed to whisky, brandy, rum, or gin, and which are substantially neutral in character, may be... attributed to whisky, brandy, rum, or gin, may be designated “Spirits”, preceded or followed by a word or... be designated “Whisky” if further qualified with the words “Distilled from rye mash” (or bourbon...

Battery condenser system particulate emission factors for cotton gins: Particle size distribution characteristics

USDA-ARS?s Scientific Manuscript database

This report is part of a project to characterize cotton gin emissions from the standpoint of total particulate stack sampling and particle size analyses. In 2013, the Environmental Protection Agency (EPA) published a more stringent standard for particulate matter with nominal diameter less than or e...

Ginning picker and stripper harvested high plains cotton - update

USDA-ARS?s Scientific Manuscript database

Texas High Plains cotton has improved over the last ten years with regard to yield and High Volume Instrument (HVI) fiber quality. Harvesting and ginning practices are needed which preserve fiber quality and maximize return to the producer. The objective of this work is to investigate the influence ...

Effect of fall-grazed sericea lespedeza (Lespedeza cuneata) on gastrointestinal nematode infections of growing goats

USDA-ARS?s Scientific Manuscript database

Infection with gastrointestinal nematodes (GIN), particularly Haemonchus contortus, a highly pathogenic blood-feeder, has a major effect on profitability of goat production world-wide. High prevalence of anthelmintic-resistant GIN in goats has increased pressure to find effective, alternative non-sy...

New seed-cotton reclaimer for high speed roller gins

USDA-ARS?s Scientific Manuscript database

An experimental laboratory prototype reclaimer is being developed by the USDA-ARS in cooperation with Lummus Corporation. The objective of the project is to develop a seed-cotton reclaimer for high speed roller ginning that has a higher operational capacity and reduced seed loss in comparison to cur...

40 CFR 86.1218-85 - Dynamometer calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the power absorption unit. The dynamometer is driven above the test speed range. The device used to... coastdown. The kinetic energy of the system is dissipated by the dynamometer. This method neglects the... with paired rolls, the inertia and power absorption of the free (rear) roll may be neglected if its...

40 CFR 86.1218-85 - Dynamometer calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the power absorption unit. The dynamometer is driven above the test speed range. The device used to... coastdown. The kinetic energy of the system is dissipated by the dynamometer. This method neglects the... with paired rolls, the inertia and power absorption of the free (rear) roll may be neglected if its...

40 CFR 86.1218-85 - Dynamometer calibration.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the power absorption unit. The dynamometer is driven above the test speed range. The device used to... coastdown. The kinetic energy of the system is dissipated by the dynamometer. This method neglects the... with paired rolls, the inertia and power absorption of the free (rear) roll may be neglected if its...

40 CFR 86.1218-85 - Dynamometer calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the power absorption unit. The dynamometer is driven above the test speed range. The device used to... coastdown. The kinetic energy of the system is dissipated by the dynamometer. This method neglects the... with paired rolls, the inertia and power absorption of the free (rear) roll may be neglected if its...

Free-to-Roll Investigation of the Pre-Production F/A-18E Powered Approach Wing Drop

NASA Technical Reports Server (NTRS)

Owens, D. Bruce; Bryant, Elaine M.; Barlow, Jewel B.

2005-01-01

A free-to-roll study of the low-speed lateral characteristics of the pre-production F/A-18E was conducted in the NASA Langley 12-Foot Low-Speed Tunnel. In developmental flight tests the F/A-18E unexpectedly experienced uncommanded lateral motions in the power approach configuration. The objective of this study was to determine the feasibility of using the free-to-roll technique for the detection of uncommanded lateral motions for the pre-production F/A-18E in the power approach configuration. The data revealed that this technique in conjunction with static data revealed insight into the cause of the lateral motions. The free-to-roll technique identified uncommanded lateral motions at the same angle-of-attack range as experienced in flight tests. The cause of the uncommanded lateral motions was unsteady asymmetric wing stall. The paper also shows that free-to-roll data or static force and moment data alone are not enough to accurately capture the potential for an aircraft to experience uncommanded lateral motion.

Improvement of the technique of calculating the energy-force parameters of pinch-pass mills for increasing the efficiency of producing cold-rolled strips

NASA Astrophysics Data System (ADS)

Garber, E. A.; Timofeeva, M. A.

2016-11-01

New propositions are introduced into the technique of energy-force calculation of pinch-pass mills in order to determine the energy-force and technological parameters of skin rolling of cold-rolled steel strips at the minimum errors. The application of these propositions decreases the errors of calculating the forces and torques in a working stand by a factor of 3-5 as compared to the calculation according to the well-known technique, saves the electric power in the existing mills, and demonstrates the possibility of decreasing the dimensions of working stands and the power of the rolling mill engine.

Acoustic sensing of seed-cotton trash levels

USDA-ARS?s Scientific Manuscript database

Modern cotton gins have a limited capability for handling varying levels of trash in the seed cotton. They can however slow down to provide another level of control. Due to the economics of running the gin plant, this is however a last resort that should only be done for the highest levels of tras...

29 CFR 780.806 - Exempt ginning limited to first processing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... cottonseed, is not exempt under section 13(b)(15). It is not first processing of the seed cotton; rather, it... 29 Labor 3 2013-07-01 2013-07-01 false Exempt ginning limited to first processing. 780.806 Section... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT...

29 CFR 780.806 - Exempt ginning limited to first processing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... cottonseed, is not exempt under section 13(b)(15). It is not first processing of the seed cotton; rather, it... 29 Labor 3 2012-07-01 2012-07-01 false Exempt ginning limited to first processing. 780.806 Section... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT...

29 CFR 780.806 - Exempt ginning limited to first processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... cottonseed, is not exempt under section 13(b)(15). It is not first processing of the seed cotton; rather, it... 29 Labor 3 2011-07-01 2011-07-01 false Exempt ginning limited to first processing. 780.806 Section... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT...

29 CFR 780.806 - Exempt ginning limited to first processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... cottonseed, is not exempt under section 13(b)(15). It is not first processing of the seed cotton; rather, it... 29 Labor 3 2010-07-01 2010-07-01 false Exempt ginning limited to first processing. 780.806 Section... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT...

29 CFR 780.806 - Exempt ginning limited to first processing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... cottonseed, is not exempt under section 13(b)(15). It is not first processing of the seed cotton; rather, it... 29 Labor 3 2014-07-01 2014-07-01 false Exempt ginning limited to first processing. 780.806 Section... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT...

Biological control agent of larger black flour beetles (Coleoptera: Tenebrionidae): A nuisance pest developing in cotton gin trash piles.

USDA-ARS?s Scientific Manuscript database

Larger black flour beetles (LBFB), Cynaeus angustus, feed on saprophytic fungi found in gin trash piles, and become nuisance pests in homes and businesses. We examined the dose-response of three entomopathogenic nematode species (Steinernema carpocapsae, S. feltiae, and Heterorhabditis bacteriophora...

An assessment of surface properties and moisture uptake of nonwoven fabrics from ginning by-products

USDA-ARS?s Scientific Manuscript database

Greige (raw) cotton by-products resulting from cotton ginning and mill processes have long been bleached for using them in absorbent nonwoven products. Other than that, the greige cotton by-products mostly had limited material applications, and used as an alternative feedstock for biomass and as a ...

Design and Functionality of the Graphical Interactive Narrative (Gin) System Version 0.2

DTIC Science & Technology

2012-08-01

System. The purpose of the Gin system is to increase the interactivity and sense of agency for human subjects in virtual environments (VEs) used for...tractability of scenario development while providing the user with an increased sense of agency by allowing them to control their own navigation

Use of Electronic Technologies to Manage Seed Cotton Modules

USDA-ARS?s Scientific Manuscript database

Most U.S. farmers and ginners still use paper tags to identify cotton modules along with a large number painted on the side of traditional modules. The gin typically assigns tags for the modules. When the gin gets the module, the paper tag is removed and the information is manually entered into a s...

Comparison of Selected Bale Moisture Measurements in a Commercial Gin

USDA-ARS?s Scientific Manuscript database

Proper measurement of bale moisture content (mc) is crucial to proper management of a cotton gin. One issue would be to avoid producing wet cotton, unacceptable for Commodity Credit Corporation Marketing Assistance Loan Program, which is defined to be a bale of cotton which is at or above 7.5% wet ...

Battery condenser system PM2.5 emission factors and rates for cotton gins

USDA-ARS?s Scientific Manuscript database

This manuscript is part of a series of manuscripts that detail a project to characterize cotton gin emissions from the standpoint of stack and ambient sampling. The impetus behind the project was the 2006 EPA implementation of a more stringent standard for particulate matter less than or equal to 2....

Laboratory and outside the laboratory measurements of ginned and ot ginned cotton for fiber micronaire and maturity by portable Near Infrared (NIR) Instruments

USDA-ARS?s Scientific Manuscript database

Micronaire is a key cotton quality assessment property, impacting downstream fiber processing and dye consistency. A component of micronaire is fiber maturity (degree of secondary wall development). Historically, micronaire and maturity are measured in a laboratory under tight environmental condit...

Update on the development of cotton gin PM10 emission factors for EPA's AP-42

USDA-ARS?s Scientific Manuscript database

A cotton ginning industry-supported project was initiated in 2008 to update the U.S. Environmental Protection Agency’s (EPA) Compilation of Air Pollution Emission Factors (AP-42) to include PM10 emission factors. This study develops emission factors from the PM10 emission factor data collected from ...

A simulated approach to estimating PM10 and PM2.5 concentrations downwind from cotton gins

USDA-ARS?s Scientific Manuscript database

Cotton gins are required to obtain operating permits from state air pollution regulatory agencies (SAPRA), which regulate the amount of particulate matter that can be emitted. Industrial Source Complex Short Term version 3 (ISCST3) is the Gaussian dispersion model currently used by some SAPRAs to pr...

Exploring the Genetic Resistance to Gastrointestinal Nematodes Infection in Goat Using RNA-Sequencing

PubMed Central

Bhuiyan, Ali Akbar; Li, Jingjin; Wu, Zhenyang; Ni, Pan; Adetula, Adeyinka Abiola; Wang, Haiyan; Zhang, Cheng; Tang, Xiaohui; Bhuyan, Anjuman Ara; Zhao, Shuhong; Du, Xiaoyong

2017-01-01

Gastrointestinal nematodes (GINs) are one of the most economically important parasites of small ruminants and a major animal health concern in many regions of the world. However, the molecular mechanisms of the host response to GIN infections in goat are still little known. In this study, two genetically distinct goat populations, one relatively resistant and the other susceptible to GIN infections, were identified in Yichang goat and then four individuals in each group were chosen to compare mRNA expression profiles using RNA-seq. Field experiment showed lower worm burden, delayed and reduced egg production in the relatively resistant group than the susceptible group. The analysis of RNA-seq showed that 2369 genes, 1407 of which were up-regulated and 962 down-regulated, were significantly (p < 0.001) differentially expressed between these two groups. Functional annotation of the 298 genes more highly expressed in the resistant group yielded a total of 46 significant (p < 0.05) functional annotation clusters including 31 genes (9 in innate immunity, 13 in immunity, and 9 in innate immune response) related to immune biosynthetic process as well as transforming growth factor (TGF)-β, mitogen-activated protein kinase (MAPK), and cell adhesion molecules (CAMs) pathways. Our findings provide insights that are immediately relevant for the improvement of host resistance to GIN infections and which will make it possible to know the mechanisms underlying the resistance of goats to GIN infections. PMID:28368324

Swiss roll nanomembranes with controlled proton diffusion as redox micro-supercapacitors.

PubMed

Ji, Hengxing; Mei, Yongfeng; Schmidt, Oliver G

2010-06-14

We demonstrate a redox Swiss roll micro-supercapacitor by rolling up a multilayered nanomembrane with an electrochemical active layer at either the outer or inner surface for different proton diffusion behaviors. The Swiss roll micro-supercapacitor could achieve high performance (e.g. capacity and life time) in a microscale power source and is helpful for studying charge transfer at the electrolyte/electrode interface.

Removing seed coat fragments with a lint cleaner grid bar air knife

USDA-ARS?s Scientific Manuscript database

Seed coat fragments (SCF) in ginned lint cause spinning problems at the textile mill and undesirable defects in finished goods. Work continued on developing an air knife that may help remove SCF from ginned lint. The air knife is mounted on the 1st lint cleaner grid bar of a saw-type lint cleaner,...

40 CFR 180.368 - Metolachlor; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., forage 6.0 Corn, sweet, kernel plus cob with husks removed 0.10 Corn, sweet, stover 6.0 Cotton, gin..., sweet, kernel plus cob with husks removed 0.10 Corn, sweet, stover 40 Cotton, gin byproducts 4.0 Cotton... 0.05 Cattle, meat 0.02 Cattle, meat byproducts, except kidney and liver 0.04 Corn, field, forage 6.0...

7 CFR 301.52 - Quarantine; restriction on interstate movement of specified regulated articles.

Code of Federal Regulations, 2010 CFR

2010-01-01

... articles: (1) Cotton and wild cotton, including all parts of these plants. (2) Seed cotton. (3) Cottonseed...) Cotton waste produced at cotton gins and cottonseed oil mills. (6) Cotton gin trash. (7) Used bagging and... cotton oil mill equipment. (9) Kenaf, including all parts of the plants. (10) Okra, including all parts...

Effect of seed size on ginning Efficiency in Upland Cotton (Gossypium hirsutum L.)

USDA-ARS?s Scientific Manuscript database

Not much information is available in the literature on the effect of seed size on ginning efficiency in upland cotton. In 2015 and 2016 nine diverse upland cotton cultivars and germplasm lines were planted at two locations in Stoneville, MS to test the above relationship. Two of the cultivars (Ark 9...

Survey results of the research needs and requirements of the ginning industries in Australia and the United States

USDA-ARS?s Scientific Manuscript database

A survey of four questions were sent to members of cotton ginning associations in Australia and the United States to determine what issues and problems needed to be addressed and where the research institutions should focus their time, money, and energy. Responses to each question were similar betw...

The effects of supplemental Sericea lespedeza pellets in lambs and kids. 1. Growth rate

USDA-ARS?s Scientific Manuscript database

Sericea lespedeza (SL; Lespedeza cuneata) has been used in recent years to aid in the control of gastrointestinal nematodes (GIN) in sheep and goats. Grazing or feeding dried SL leads to a reduction in egg production by GIN and reduces coccidiosis. Growth rates in lambs and kids when fed SL for mo...

The accuracy of cotton bale moisture sensors used in a South Texas commercial gin with lint moisture restoration

USDA-ARS?s Scientific Manuscript database

Proper measurement of bale moisture content (mc) is crucial to proper management of a cotton gin. It is important to avoid producing wet cotton both for the benefit of the mills and because wet cotton is unacceptable for Commodity Credit Corporation Marketing Assistance Loan Program. Wet cotton is...

Particle size distribution characteristics of cotton gin battery condenser system total particulate emissions

USDA-ARS?s Scientific Manuscript database

This report is part of a project to characterize cotton gin emissions from the standpoint of total particulate stack sampling and particle size analyses. In 2013, EPA published a more stringent standard for particulate matter with nominal diameter less than or equal to 2.5 µm (PM2.5). This created a...

Development of cotton gin PM10 emission factors for EPA’s AP-42

USDA-ARS?s Scientific Manuscript database

The Compilation of Air Pollution Emission Factors (AP-42) emission factors are assigned ratings, from A (Excellent) to E (Poor), based on the quality of data used to develop them. All current PM10 cotton gin emission factors received quality ratings of D or lower. In an effort to improve these ratin...

Development of cotton gin PM2.5 emission factors for EPA’S AP-42

USDA-ARS?s Scientific Manuscript database

The Compilation of Air Pollution Emission Factors (AP-42) emission factors are assigned ratings, from A (Excellent) to E (Poor), based on the quality of data used to develop them. AP-42 currently contains no PM2.5 cotton gin emission factors. In an effort to develop science-based data for regulating...

Update on the development of cotton gin PM2.5 emission factors for EPA's AP-42

USDA-ARS?s Scientific Manuscript database

A cotton ginning industry-supported project was initiated in 2008 to update the U.S. Environmental Protection Agency’s (EPA) Compilation of Air Pollution Emission Factors (AP-42) to include PM2.5 emission factors. This study develops emission factors from the PM2.5 emission factor data collected fro...

Current status for gastrointestinal nematode diagnosis in small ruminants: where are we and where are we going?

PubMed

Preston, Sarah Jane Margaret; Sandeman, Mark; Gonzalez, Jorge; Piedrafita, David

2014-01-01

Gastrointestinal nematode (GIN) parasites pose a significant economic burden particularly in small ruminant production systems. Anthelmintic resistance is a serious concern to the effective control of GIN parasites and has fuelled the focus to design and promote sustainable control of practices of parasite control. Many facets of sustainable GIN parasite control programs rely on the ability to diagnose infection both qualitatively and quantitatively. Diagnostics are required to determine anthelmintic efficacies, for targeted treatment programs and selection of animals for parasite resistant breeding. This review describes much of the research investigated to date to improve the current diagnostic for the above practices which is based on counting the number of parasite eggs in faeces.

Constant-roll tachyon inflation and observational constraints

NASA Astrophysics Data System (ADS)

Gao, Qing; Gong, Yungui; Fei, Qin

2018-05-01

For the constant-roll tachyon inflation, we derive the analytical expressions for the scalar and tensor power spectra, the scalar and tensor spectral tilts and the tensor to scalar ratio to the first order of epsilon1 by using the method of Bessel function approximation. The derived ns-r results are compared with the observations, we find that only the constant-roll inflation with ηH being a constant is consistent with the observations and observations constrain the constant-roll inflation to be slow-roll inflation. The tachyon potential is also reconstructed for the constant-roll inflation which is consistent with the observations.

49 CFR 661.12 - Certification requirement for procurement of buses, other rolling stock and associated equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., other rolling stock and associated equipment. 661.12 Section 661.12 Transportation Other Regulations... associated equipment. If buses or other rolling stock (including train control, communication, and traction power equipment) are being procured, the appropriate certificate as set forth below shall be completed...

Analysis of Roll Steering for Solar Electric Propulsion Missions

NASA Technical Reports Server (NTRS)

Pederson, Dylan, M.; Hojnicki, Jeffrey, S.

2012-01-01

Nothing is more vital to a spacecraft than power. Solar Electric Propulsion (SEP) uses that power to provide a safe, reliable, and, most importantly, fuel efficient means to propel a spacecraft to its destination. The power performance of an SEP vehicle s solar arrays and electrical power system (EPS) is largely influenced by the environment in which the spacecraft is operating. One of the most important factors that determines solar array power performance is how directly the arrays are pointed to the sun. To get the most power from the solar arrays, the obvious solution is to point them directly at the sun at all times. Doing so is not a problem in deep space, as the environment and pointing conditions that a spacecraft faces are fairly constant and are easy to accommodate, if necessary. However, large and sometimes rapid variations in environmental and pointing conditions are experienced by Earth orbiting spacecraft. SEP spacecraft also have the additional constraint of needing to keep the thrust vector aligned with the velocity vector. Thus, it is important to analyze solar array power performance for any vehicle that spends an extended amount of time orbiting the Earth, and to determine how much off-pointing can be tolerated to produce the required power for a given spacecraft. This paper documents the benefits and drawbacks of perfectly pointing the solar arrays of an SEP spacecraft spiraling from Earth orbit, and how this might be accomplished. Benefits and drawbacks are defined in terms of vehicle mass, power, volume, complexity, and cost. This paper will also look at the application of various solar array pointing methods to future missions. One such pointing method of interest is called roll steering . Roll steering involves rolling the entire vehicle twice each orbit. Roll steering, combined with solar array gimbal tracking, is used to point the solar arrays perfectly towards the sun at all points in the orbit, while keeping the vehicle thrusters aligned in the velocity direction. Roll steering is particularly attractive for a recently proposed mission that involves a spiral trajectory from low Earth orbit (LEO) to the Earth-Moon Lagrange Point 1 (E-M L1). During the spiral, the spacecraft will spend over 300 days experiencing the full spectrum of near-earth environments and solar array pointing conditions. An extensive study of the application of SEP (and roll steering) to this spiral mission is included, highlighting the ultimate goal of reduced vehicle cost and mass. Tools used for this analysis include the Systems Power Analysis for Capability Evaluation (Refs. 1 and 2) (SPACE) electrical power systems code, and SEP trajectory simulation tools developed at NASA Glenn Research Center.

Foam Rolling for Delayed-Onset Muscle Soreness and Recovery of Dynamic Performance Measures

PubMed Central

Pearcey, Gregory E. P.; Bradbury-Squires, David J.; Kawamoto, Jon-Erik; Drinkwater, Eric J.; Behm, David G.; Button, Duane C.

2015-01-01

Context: After an intense bout of exercise, foam rolling is thought to alleviate muscle fatigue and soreness (ie, delayed-onset muscle soreness [DOMS]) and improve muscular performance. Potentially, foam rolling may be an effective therapeutic modality to reduce DOMS while enhancing the recovery of muscular performance. Objective: To examine the effects of foam rolling as a recovery tool after an intense exercise protocol through assessment of pressure-pain threshold, sprint time, change-of-direction speed, power, and dynamic strength-endurance. Design: Controlled laboratory study. Setting: University laboratory. Patients or Other Participants: A total of 8 healthy, physically active males (age = 22.1 ± 2.5 years, height = 177.0 ± 7.5 cm, mass = 88.4 ± 11.4 kg) participated. Intervention(s): Participants performed 2 conditions, separated by 4 weeks, involving 10 sets of 10 repetitions of back squats at 60% of their 1-repetition maximum, followed by either no foam rolling or 20 minutes of foam rolling immediately, 24, and 48 hours postexercise. Main Outcome Measure(s): Pressure-pain threshold, sprint speed (30-m sprint time), power (broad-jump distance), change-of-direction speed (T-test), and dynamic strength-endurance. Results: Foam rolling substantially improved quadriceps muscle tenderness by a moderate to large amount in the days after fatigue (Cohen d range, 0.59 to 0.84). Substantial effects ranged from small to large in sprint time (Cohen d range, 0.68 to 0.77), power (Cohen d range, 0.48 to 0.87), and dynamic strength-endurance (Cohen d = 0.54). Conclusions: Foam rolling effectively reduced DOMS and associated decrements in most dynamic performance measures. PMID:25415413

The genetic basis for the selection of dairy goats with enhanced resistance to gastrointestinal nematodes

PubMed Central

Heckendorn, Felix; Bieber, Anna; Werne, Steffen; Saratsis, Anastasios; Maurer, Veronika; Stricker, Chris

2017-01-01

Gastrointestinal nematodes (GIN) severely affect small ruminant production worldwide. Increasing problems of anthelmintic resistance have given strong impetus to the search for alternative strategies to control GIN. Selection of animals with an enhanced resistance to GIN has been shown to be successful in sheep. In goats, the corresponding information is comparatively poor. Therefore, the present study was designed to provide reliable data on heritabilities of and genetic correlations between phenotypic traits linked to GIN and milk yield in two major dairy goat breeds (Alpine and Saanen). In all, 20 herds totalling 1303 goats were enrolled in the study. All herds had (i) a history of gastrointestinal nematode infection, (ii) uniform GIN exposure on pasture and (iii) regular milk recordings. For all goats, individual recordings of faecal egg counts (FEC), FAMACHA© eye score, packed cell volume (PCV) and milk yield were performed twice a year with an anthelmintic treatment in between. The collected phenotypic data were multivariately modelled using animal as a random effect with its covariance structure inferred from the pedigree, enabling estimation of the heritabilities of the respective traits and the genetic correlation between them. The heritabilities of FEC, FAMACHA© and PCV were 0.07, 0.22 and 0.22, respectively. The genetic correlation between FEC and FAMACHA© was close to zero and −0.41 between FEC and PCV. The phenotypic correlation between FEC and milk yield was close to zero, whereas the genetic correlation was 0.49. Our data suggest low heritability of FEC in Saanen and Alpine goats and an unfavourable genetic correlation of FEC with milk yield. PMID:28792887

Foucault Dissipation in a Rolling Cylinder: A Webcam Quantitative Study

ERIC Educational Resources Information Center

Bonanno, A.; Bozzo, G.; Camarca, M.; Sapia, P.

2011-01-01

In this paper we present an experimental strategy to measure the micro power dissipation due to Foucault "eddy" currents in a copper cylinder rolling on two parallel conductive rails in the presence of a magnetic field. Foucault power dissipation is obtained from kinematical measurements carried out by using a common PC webcam and video analysis…

Non-contact image processing for gin trash sensors in stripper harvested cotton with burr and fine trash correction

USDA-ARS?s Scientific Manuscript database

This study was initiated to provide the basis for obtaining online information as to the levels of the various types of gin trash. The objective is to provide the ginner with knowledge of the quantity of the various trash components in the raw uncleaned seed cotton. This information is currently not...

40 CFR 180.368 - Metolachlor; tolerances for residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., forage 6.0 Corn, sweet, kernel plus cob with husks removed 0.10 Corn, sweet, stover 6.0 Cotton, gin..., sweet, kernel plus cob with husks removed 0.10 Corn, sweet, stover 6.0 Cotton, gin byproducts 4.0 Cotton... 0.05 Cattle, meat 0.02 Cattle, meat byproducts, except kidney and liver 0.04 Corn, field, forage 6.0...

ntegrated control of gastrointestinal nematodes (GIN) using sericea lespedeza (SL), FAMACHA, and copper oxide wire particles (COWP) in weaned goats in Arkansas

USDA-ARS?s Scientific Manuscript database

Lack of effective anthelmintics for control of GIN in goats has led to the need for an integrated management approach. FAMACHA is an effective tool for selective deworming of Haemonchus contortus-infected goats, while COWP and SL grazing have reduced H. contortus infection. The objective was to exam...

The accuracy and calibration of three cotton bale moisture sensors used in a commercial gin with lint moisture restoration

USDA-ARS?s Scientific Manuscript database

Proper measurement of bale moisture content (mc) is crucial to proper management of a cotton gin. It is important to avoid producing wet cotton, unacceptable for Commodity Credit Corporation Marketing Assistance Loan Program, which is defined to be a bale of cotton which is at or above 7.5% wet bas...

4. VIEW WEST FROM DOOR OF NORTHERN ROOM OF WEAVING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW WEST FROM DOOR OF NORTHERN ROOM OF WEAVING HOUSE, SHOWING FIREPLACE AND REMAINS OF COTTON GIN (The gin is thought to have been made locally in the 19th century by William Ellison, a free black carpenter and enterpreneur; see data pages.) - Borough House, Weaving House, State Route 261 & Garners Ferry Road, Stateburg, Sumter County, SC

Continued work to develop a low-cost sensor to detect plastic contamination in seed cotton at the gin

USDA-ARS?s Scientific Manuscript database

Contamination of cotton from plastic trash that collects in cotton fields or introduced at the gin or due to mishandling at the warehouse is one of the most significant threats to US cotton world market share. For U.S. cotton to maintain its status as “contamination-free”, the industry must strive t...

Development of cotton gin PM10 emission factors for EPA’s AP-42-DUPLICATE DO NOT USE

USDA-ARS?s Scientific Manuscript database

The Compilation of Air Pollution Emission Factors (AP-42) emission factors are assigned ratings, from A (Excellent) to E (Poor), based on the quality of data used to develop them. All current PM10 cotton gin emission factors received quality ratings of D or lower. In an effort to improve these ratin...

Can legislation prevent debauchery? Mother gin and public health in 18th-century England.

PubMed Central

Warner, J; Her, M; Gmel, G; Rehm, J

2001-01-01

The "gin epidemic" of 1720 to 1751 in England was the first time that government intervened in a systematic fashion to regulate and control sales of alcohol. The epidemic therefore provides an opportunity to gauge the effects of multiple legislative interventions over time. Toward that end, we employed time series analysis in conjunction with qualitative methodologies to test the interplay of multiple independent variables, including real wages and taxes, on the consumption of distilled spirits from 1700 through 1771. The results showed that each of the 3 major gin acts was successful in the short term only, consistent with the state's limited resources for enforcement at the local level, and that in each instance consumption actually increased shortly thereafter. This was true even of the Gin Act of 1751, which, contrary to the assumptions of contemporaries and many historians, succeeded by accident rather than by design. The results also suggest that the epidemic followed the inverse U-shaped trajectory of more recent drug scares and that consumption declined only after the more deleterious effects of distilled spirits had been experienced by large numbers of people. PMID:11236401

Effect of superconducting solenoid model cores on spanwise iron magnet roll control

NASA Technical Reports Server (NTRS)

Britcher, C. P.

1985-01-01

Compared with conventional ferromagnetic fuselage cores, superconducting solenoid cores appear to offer significant reductions in the projected cost of a large wind tunnel magnetic suspension and balance system. The provision of sufficient magnetic roll torque capability has been a long-standing problem with all magnetic suspension and balance systems; and the spanwise iron magnet scheme appears to be the most powerful system available. This scheme utilizes iron cores which are installed in the wings of the model. It was anticipated that the magnetization of these cores, and hence the roll torque generated, would be affected by the powerful external magnetic field of the superconducting solenoid. A preliminary study has been made of the effect of the superconducting solenoid fuselage model core concept on the spanwise iron magnet roll torque generation schemes. Computed data for one representative configuration indicate that reductions in available roll torque occur over a range of applied magnetic field levels. These results indicate that a 30-percent increase in roll electromagnet capacity over that previously determined will be required for a representative 8-foot wind tunnel magnetic suspension and balance system design.

Advanced servo manipulator

DOEpatents

Holt, W.E.; Kuban, D.P.; Martin, H.L.

1988-10-25

An advanced servo manipulator has modular parts. Modular motor members drive individual input gears to control shoulder roll, shoulder pitch, elbow pitch, wrist yaw, wrist pitch, wrist roll, and tong spacing. The modules include a support member, a shoulder module for controlling shoulder roll, and a sleeve module attached to the shoulder module in fixed relation thereto. The shoulder roll sleeve module has an inner cylindrical member rotatable relative to the outer cylindrical member, and upon which a gear pod assembly is mounted. A plurality of shafts are driven by the gears, which are in turn driven by individual motor modules to transmit rotary power to control elbow pitch as well as to provide four different rotary shafts across the bendable elbow joint to supply rotary motive power to a wrist member and tong member. 41 figs.

Advanced servo manipulator

DOEpatents

Holt, William E.; Kuban, Daniel P.; Martin, H. Lee

1988-01-01

An advanced servo manipulator has modular parts. Modular motor members drive individual input gears to control shoulder roll, shoulder pitch, elbow pitch, wrist yaw, wrist pitch, wrist roll, and tong spacing. The modules include a support member, a shoulder module for controlling shoulder roll, and a sleeve module attached to the shoulder module in fixed relation thereto. The shoulder roll sleeve module has an inner cylindrical member rotatable relative to the outer cylindrical member, and upon which a gear pod assembly is mounted. A plurality of shafts are driven by the gears, which are in turn driven by individual motor modules to transmit rotary power to control elbow pitch as well as to provide four different rotary shafts across the bendable elbow joint to supply rotary motive power to a wrist member and tong member.

Supplementation with dry Mimosa caesalpiniifolia leaves can reduce the Haemonchus contortus worm burden of goats.

PubMed

Brito, D R B; Costa-Júnior, L M; Garcia, J L; Torres-Acosta, J F J; Louvandini, H; Cutrim-Júnior, J A A; Araújo, J F M; Soares, E D S

2018-03-15

Gastrointestinal nematodes (GINs) cause considerable economic losses in grazing goat herds. At present, GIN control cannot rely on conventional anthelmintic (AH) drugs because parasites have developed resistance against such drugs. Thus, alternative control methods are being sought to reduce the dependence on AH. Many tannin-rich plants exhibit AH activity and may be used as alternatives for GIN control. Mimosa caesalpiniifolia is a tannin-rich shrub consumed by small ruminants in Brazil. This study evaluated the in vivo AH effect of M. caesalpiniifolia leaf powder supplementation on GIN egg fecal excretion and worm burden in goats. Plant leaves were harvested, dried and ground to obtain a powder. Twenty-four castrated male goats, aged six to eight months, with a mean body weight of 15.0 ± 2.5 kg were used in the experiment. Animals were infected orally with 16,000 larvae comprising 50% Haemonchus spp., 41% Trichostrongylus spp. and 9% Oesophagostomum spp. Once the infection was patent, the goats were distributed into four groups of six animals. The control group received concentrate without condensed tannins (CTs) and did not receive any drench against GINs. The monepantel group received concentrate without CTs and were drenched once with monepantel. The other two groups received the M. caesalpiniifolia leaf powder in two periods of seven consecutive days (days 1-7 and 14-21), with one of the groups also receiving 10 g of polyethyleneglycol (PEG)/day. The animals were weighed weekly, and individual fecal eggs counts (FECs) were performed daily. After 28 days, the animals were humanly slaughtered, and the worm burden was estimated. Although live weight gain and FECs did not differ among the groups (P > 0.05), post-mortem worm counts showed a reduction in Haemonchus contortus adult worm burden (57.7%) in goats of the CT group compared to control goats (P < 0.05). The addition of PEG did not diminish AH activity in the CT + PEG group (66.9% reduction compared to the control). No AH effect against other GIN species was found. The result for the addition of PEG suggested that the observed AH activity was associated with plant secondary compounds, as opposed to CTs. As expected, no AH effect against Oesophagostomum columbianum was found for the monepantel group showed. Thus, feeding dry leaves of M. caesalpiniifolia represent a promising alternative for the control of GIN infections in goats. Copyright © 2018 Elsevier B.V. All rights reserved.

Sharp inflaton potentials and bi-spectra: effects of smoothening the discontinuity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Jérôme; Sriramkumar, L.; Hazra, Dhiraj Kumar, E-mail: jmartin@iap.fr, E-mail: sriram@physics.iitm.ac.in, E-mail: dhiraj@apctp.org

Sharp shapes in the inflaton potentials often lead to short departures from slow roll which, in turn, result in deviations from scale invariance in the scalar power spectrum. Typically, in such situations, the scalar power spectrum exhibits a burst of features associated with modes that leave the Hubble radius either immediately before or during the epoch of fast roll. Moreover, one also finds that the power spectrum turns scale invariant at smaller scales corresponding to modes that leave the Hubble radius at later stages, when slow roll has been restored. In other words, the imprints of brief departures from slowmore » roll, arising out of sharp shapes in the inflaton potential, are usually of a finite width in the scalar power spectrum. Intuitively, one may imagine that the scalar bi-spectrum too may exhibit a similar behavior, i.e. a restoration of scale invariance at small scales, when slow roll has been reestablished. However, in the case of the Starobinsky model (viz. the model described by a linear inflaton potential with a sudden change in its slope) involving the canonical scalar field, it has been found that, a rather sharp, though short, departure from slow roll can leave a lasting and significant imprint on the bi-spectrum. The bi-spectrum in this case is found to grow linearly with the wavenumber at small scales, a behavior which is clearly unphysical. In this work, we study the effects of smoothening the discontinuity in the Starobinsky model on the scalar bi-spectrum. Focusing on the equilateral limit, we analytically show that, for smoother potentials, the bi-spectrum indeed turns scale invariant at suitably large wavenumbers. We also confirm the analytical results numerically using our newly developed code BINGO. We conclude with a few comments on certain related points.« less

GoQBot: a caterpillar-inspired soft-bodied rolling robot.

PubMed

Lin, Huai-Ti; Leisk, Gary G; Trimmer, Barry

2011-06-01

Rolling locomotion using an external force such as gravity has evolved many times. However, some caterpillars can curl into a wheel and generate their own rolling momentum as part of an escape repertoire. This change in body conformation occurs well within 100 ms and generates a linear velocity over 0.2 m s(-1), making it one of the fastest self-propelled wheeling behaviors in nature. Inspired by this behavior, we construct a soft-bodied robot to explore the dynamics and control issues of ballistic rolling. This robot, called GoQBot, closely mimics caterpillar rolling. Analyzing the whole body kinematics and 2D ground reaction forces at the robot ground anchor reveals about 1G of acceleration and more than 200 rpm of angular velocity. As a novel rolling robot, GoQBot demonstrates how morphing can produce new modes of locomotion. Furthermore, mechanical coupling of the actuators improves body coordination without sensory feedback. Such coupling is intrinsic to soft-bodied animals because there are no joints to isolate muscle-generated movements. Finally, GoQBot provides an estimate of the mechanical power for caterpillar rolling that is comparable to that of a locust jump. How caterpillar musculature produces such power in such a short time is yet to be discovered.

Rolling Resistance of Pneumatic Tires

DOT National Transportation Integrated Search

1975-01-01

Potential improvements in tire power transmission efficiency are worth seeking for gaining improved automotive fuel economy. Summaries herein of tire rolling resistance as influenced by tire construction and design, tire materials, and tire operating...

Rolling Resistance of Pneumatic Tires

DOT National Transportation Integrated Search

1979-05-01

Potential improvements in tire power transmission efficiency are worth seeking for gaining improved automotive fuel economy. Summaries herein of tire rolling resistance as influenced by tire construction and design, tire materials, and tire operating...

Gastric colonisation with a restricted commensal microbiota replicates the promotion of neoplastic lesions by diverse intestinal microbiota in the Helicobacter pylori INS-GAS mouse model of gastric carcinogenesis

PubMed Central

Lertpiriyapong, Kvin; Whary, Mark T.; Muthupalani, Sureshkumar; Lofgren, Jennifer L.; Gamazon, Eric R.; Feng, Yan; Ge, Zhongming; Wang, Timothy C.; Fox, James G.

2014-01-01

Objectives Gastric colonisation with intestinal flora (IF) has been shown to promote Helicobacter pylori (Hp)-associated gastric cancer. However, it is unknown if the mechanism involves colonisation with specific or diverse microbiota secondary to gastric atrophy. Design Gastric colonisation with Altered Schaedler’s flora (ASF) and Hp were correlated with pathology, immune responses and mRNA expression for proinflammatory and cancer-related genes in germ-free (GF), Hp monoassociated (mHp), restricted ASF (rASF; 3 species), and specific pathogen-free (complex IF), hypergastrinemic INS-GAS mice 7 months postinfection. Results Male mice cocolonised with rASFHp or IFHp developed the most severe pathology. IFHp males had the highest inflammatory responses, and 40% developed invasive gastrointestinal intraepithelial neoplasia (GIN). Notably, rASFHp colonisation was highest in males and 23% developed invasive GIN with elevated expression of inflammatory biomarkers. Lesions were less severe in females and none developed GIN. Gastritis in male rASFHp mice was accompanied by decreased Clostridum species ASF356 and Bacteroides species ASF519 colonisation and an overgrowth of Lactobacillus murinus ASF361, supporting that inflammation-driven atrophy alters the gastric niche for GI commensals. Hp colonisation also elevated expression of IL-11 and cancer-related genes, Ptger4 and Tgf-β, further supporting that Hp infection accelerates gastric cancer development in INS-GAS mice. Conclusions rASFHp colonisation was sufficient for GIN development in males, and lower GIN incidence in females was associated with lower inflammatory responses and gastric commensal and Hp colonisation. Colonisation efficiency of commensals appears more important than microbial diversity and lessens the probability that specific gastrointestinal pathogens are contributing to cancer risk. PMID:23812323

A Combination of Sulindac and Antimicrobial Eradication of H. pylori Prevents Progression of Gastric Cancer in Hypergastrinemic INS-GAS Mice

PubMed Central

Lee, Chung-Wei; Rickman, Barry; Rogers, Arlin B.; Muthupalani, Sureshkumar; Takaishi, Shigeo; Yang, Peiying; Wang, Timothy C.; Fox, James G.

2009-01-01

Helicobacter pylori infection causes severe dysplasia manifested as gastrointestinal intraepithelial neoplasia (GIN) after 28 weeks post H. pylori infection (WPI) in cancer-prone, hypergastrinemic male INS-GAS mice. We examined the efficacy of the NSAID sulindac (400 ppm in drinking water) alone, the CCK2/gastrin receptor antagonist YM022 (45 mg/kg/week) alone, and sulindac or YM022 combined with H. pylori eradication therapy to prevent H. pylori-associated gastric cancer in male INS-GAS mice. Treatments started at 22 WPI, and mice were euthanized at 28 WPI. In uninfected mice, all treatments significantly delayed development of spontaneous GIN (p<0.05). In H. pylori-infected mice, sulindac alone or YM022 alone had no protective effect on H. pylori-associated GIN. Importantly, sulindac exacerbated the severity of H. pylori-associated gastritis despite decreased gastric PEG2 levels. However, sulindac combined with H. pylori antimicrobial eradication reduced the incidence of GIN (p<0.05), whereas YM022 combined with antimicrobial eradication did not reduce GIN. In infected mice, sulindac or YM022 treatment did not alter gastric expression of the proinflammatory cytokines Ifn-γ and Tnf-α and mucosal cell proliferation. Sulindac or YM022 combined with antimicrobial eradication down-regulated mRNA levels of Ifnγ and Tnfα, and mucosal cell proliferation (p<0.05). We conclude that sulindac enhances H. pylori gastritis and may promote inflammation-mediated gastric carcinogenesis. The combination of sulindac and antimicrobial H. pylori eradication was beneficial for reducing proinflammatory cytokine mRNA in the stomach and preventing progression from severe dysplasia to gastric cancer in H. pylori-infected INS-GAS mice. PMID:19826057

Tensor to scalar ratio and large scale power suppression from pre-slow roll initial conditions

NASA Astrophysics Data System (ADS)

Lello, Louis; Boyanovsky, Daniel

2014-05-01

We study the corrections to the power spectra of curvature and tensor perturbations and the tensor-to-scalar ratio r in single field slow roll inflation with standard kinetic term due to initial conditions imprinted by a ``fast-roll'' stage prior to slow roll. For a wide range of initial inflaton kinetic energy, this stage lasts only a few e-folds and merges smoothly with slow-roll thereby leading to non-Bunch-Davies initial conditions for modes that exit the Hubble radius during slow roll. We describe a program that yields the dynamics in the fast-roll stage while matching to the slow roll stage in a manner that is independent of the inflationary potentials. Corrections to the power spectra are encoded in a ``transfer function'' for initial conditions Script Tα(k), Script Pα(k) = PBDα(k)Script Tα(k), implying a modification of the ``consistency condition'' for the tensor to scalar ratio at a pivot scale k0: r(k0) = -8nT(k0) [Script TT(k0)/Script TScript R(k0)]. We obtain Script Tα(k) to leading order in a Born approximation valid for modes of observational relevance today. A fit yields Script Tα(k) = 1+Aαk-pcos [2πωk/Hsr+varphiα], with 1.5lesssimplesssim2, ω simeq 1 and Hsr the Hubble scale during slow roll inflation, where curvature and tensor perturbations feature the same p,ω for a wide range of initial conditions. These corrections lead to both a suppression of the quadrupole and oscillatory features in both PR(k) and r(k0) with a period of the order of the Hubble scale during slow roll inflation. The results are quite general and independent of the specific inflationary potentials, depending solely on the ratio of kinetic to potential energy κ and the slow roll parameters epsilonV, ηV to leading order in slow roll. For a wide range of κ and the values of epsilonV ηV corresponding to the upper bounds from Planck, we find that the low quadrupole is consistent with the results from Planck, and the oscillations in r(k0) as a function of k0 could be observable if the modes corresponding to the quadrupole and the pivot scale crossed the Hubble radius very few (2-3) e-folds after the onset of slow roll. We comment on possible impact on the recent BICEP2 results.

Small-Molecule Organic Photovoltaic Modules Fabricated via Halogen-Free Solvent System with Roll-to-Roll Compatible Scalable Printing Method.

PubMed

Heo, Youn-Jung; Jung, Yen-Sook; Hwang, Kyeongil; Kim, Jueng-Eun; Yeo, Jun-Seok; Lee, Sehyun; Jeon, Ye-Jin; Lee, Donmin; Kim, Dong-Yu

2017-11-15

For the first time, the photovoltaic modules composed of small molecule were successfully fabricated by using roll-to-roll compatible printing techniques. In this study, blend films of small molecules, BTR and PC 71 BM were slot-die coated using a halogen-free solvent system. As a result, high efficiencies of 7.46% and 6.56% were achieved from time-consuming solvent vapor annealing (SVA) treatment and roll-to-roll compatible solvent additive approaches, respectively. After successful verification of our roll-to-roll compatible method on small-area devices, we further fabricated large-area photovoltaic modules with a total active area of 10 cm 2 , achieving a power conversion efficiency (PCE) of 4.83%. This demonstration of large-area photovoltaic modules through roll-to-roll compatible printing methods, even based on a halogen-free solvent, suggests the great potential for the industrial-scale production of organic solar cells (OSCs).

Research on the rolling moment in the symmetrical and asymmetrical rolling process

NASA Astrophysics Data System (ADS)

Alexa, V.; Raţiu, S. A.; Kiss, I.; Cioată, C. G.

2017-01-01

Research distribution the rolling moments symmetrical and asymmetrical report presents great importance both in theory and to introduce clarifications to the calculation of rolling resistance line assemblies. Clarifying individuals of metallic material deformation between the rolls single cylinder diameters act of any difference of work and analysis of advance and delay phenomena. Torque drive value for each of the rolling cylinders was done by reducing the thickness of the laminate samples, an experimental facility located in the laboratory of plastic deformation of the Faculty of Engineering Hunedoara. The analysis of research results show that in terms of power consumption for deformation and safety equipment in operation is rational for mills which require such a difference between the work rolls to execute about one cylinder operated.

Battery condenser system PM2.5 emission factors and rates for cotton gins: Method 201A combination PM10 and PM2.5 sizing cyclones

USDA-ARS?s Scientific Manuscript database

This report is part of a project to characterize cotton gin emissions from the standpoint of stack sampling. In 2006, EPA finalized and published a more stringent standard for particulate matter with nominal diameter less than or equal to 2.5 µm (PM2.5). This created an urgent need to collect additi...

New perspectives on constant-roll inflation

NASA Astrophysics Data System (ADS)

Cicciarella, Francesco; Mabillard, Joel; Pieroni, Mauro

2018-01-01

We study constant-roll inflation using the β-function formalism. We show that the constant rate of the inflaton roll is translated into a first order differential equation for the β-function which can be solved easily. The solutions to this equation correspond to the usual constant-roll models. We then construct, by perturbing these exact solutions, more general classes of models that satisfy the constant-roll equation asymptotically. In the case of an asymptotic power law solution, these corrections naturally provide an end to the inflationary phase. Interestingly, while from a theoretical point of view (in particular in terms of the holographic interpretation) these models are intrinsically different from standard slow-roll inflation, they may have phenomenological predictions in good agreement with present cosmological data.

Experience of Application of Liquid Lubricating Materials during Wide Strip Hot Rolling

NASA Astrophysics Data System (ADS)

Platov, S. I.; Dema, R. R.; Kharchenko, M. V.; Amirov, R. N.

2017-12-01

The paper presents the results of the scientific and practical research of roller systems operation at feed of liquid lubricating materials through the example of the wide strip hot rolling Mill-2000 at PAO MMK. The experiments proved that application of lubricating materials leads to decrease of energy-power parameters of the process by 12 to 15 %, and reduction of work roll wear by 10 to 12%. The practical results of the study are developed recommendations on determination of consumption-volumetric parameters of the supplied lubricating material depending on rheological and geometrical parameters of the rolled strip and current wear of work rolls.

Theoretical Calculation of the Power Spectra of the Rolling and Yawing Moments on a Wing in Random Turbulence

NASA Technical Reports Server (NTRS)

Eggleston, John M; Diederich, Franklin W

1957-01-01

The correlation functions and power spectra of the rolling and yawing moments on an airplane wing due to the three components of continuous random turbulence are calculated. The rolling moments to the longitudinal (horizontal) and normal (vertical) components depend on the spanwise distributions of instantaneous gust intensity, which are taken into account by using the inherent properties of symmetry of isotropic turbulence. The results consist of expressions for correlation functions or spectra of the rolling moment in terms of the point correlation functions of the two components of turbulence. Specific numerical calculations are made for a pair of correlation functions given by simple analytic expressions which fit available experimental data quite well. Calculations are made for four lift distributions. Comparison is made with the results of previous analyses which assumed random turbulence along the flight path and linear variations of gust velocity across the span.

Adaptive Electronic Camouflage Using Texture Synthesis

DTIC Science & Technology

2012-04-01

algorithm begins by computing the GLCMs, GIN and GOUT , of the input image (e.g., image of local environment) and output image (randomly generated...respectively. The algorithm randomly selects a pixel from the output image and cycles its gray-level through all values. For each value, GOUT is updated...The value of the selected pixel is permanently changed to the gray-level value that minimizes the error between GIN and GOUT . Without selecting a

Free-to-Roll Investigation of Uncommanded Lateral Motions for an Aircraft With Vented Strakes

NASA Technical Reports Server (NTRS)

Bryan, Elaine M.; Owens, D. Bruce; Barlow, Jewel B.

2004-01-01

A free-to-roll study of the low-speed lateral characteristics of the pre-production F/A-18E was conducted in the NASA Langley 12-Foot Low-Speed Tunnel. In developmental flight tests the F/A-18E unexpectedly experienced uncommanded lateral motions in the power approach configuration. The objective of this study was to determine the feasibility of using the free-to-roll technique for the detection of uncommanded lateral motions for the preproduction F/A-18E in the power approach configuration. The data revealed that this technique in conjunction with static data revealed insight into the cause of the lateral motions. The free-to-roll technique identified uncommanded lateral motions at the same angle-of-attack range as experienced in flight tests. The cause of the uncommanded lateral motions was unsteady asymmetric wing stall. The paper also shows that free-to-roll data or static force and moment data alone are not enough to accurately capture the potential for an aircraft to experience uncommanded lateral motion.

Free-to-Roll Investigation of Uncommanded Lateral Motions for an Aircraft with Vented Strakes

NASA Technical Reports Server (NTRS)

Owens, Elaine M.; Bryant, Elaine M.; Barlow, Jewel B.

2005-01-01

A free-to-roll study of the low-speed lateral characteristics of the pre-production F/A-l8E was conducted in the NASA Langley 12-Foot Low-Speed Tunnel. In developmental flight tests the F/A-18E unexpectedly experienced uncommanded lateral motions in the power approach configuration. The objective of this study was to determine the feasibility of using the free-to-roll technique for the detection of uncommanded lateral motions for the pre-production F/A-l8E in the power approach configuration. The data revealed that this technique in conjunction with static data revealed insight into the cause of the lateral motions. The free-to-roll technique identified uncommanded lateral motions at the same angle-of-attack range as experienced in flight tests. The cause of the uncommanded lateral motions was unsteady asymmetric wing stall. The paper also shows that free-to-roll data or static force and moment data alone are not enough to accurately capture the potential for an aircraft to experience uncommanded lateral motion.

Rolling resistance and propulsion efficiency of manual and power-assisted wheelchairs.

PubMed

Pavlidou, Efthymia; Kloosterman, Marieke G M; Buurke, Jaap H; Rietman, Johan S; Janssen, Thomas W J

2015-11-01

Rolling resistance is one of the main forces resisting wheelchair propulsion and thus affecting stress exerted on the upper limbs. The present study investigates the differences in rolling resistance, propulsion efficiency and energy expenditure required by the user during power-assisted and manual propulsion. Different tire pressures (50%, 75%, 100%) and two different levels of motor assistance were tested. Drag force, energy expenditure and propulsion efficiency were measured in 10 able-bodied individuals under different experimental settings on a treadmill. Results showed that drag force levels were significantly higher in the 50%, compared to the 75% and 100% inflation conditions. In terms of wheelchair type, the manual wheelchair displayed significantly lower drag force values than the power-assisted one. The use of extra-power-assisted wheelchair appeared to be significantly superior to conventional power-assisted and manual wheelchairs concerning both propulsion efficiency and energy expenditure required by the user. Overall, the results of the study suggest that the use of power-assisted wheelchair was more efficient and required less energy input by the user, depending on the motor assistance provided. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

Beliefs, intentions, and beyond: A qualitative study on the adoption of sustainable gastrointestinal nematode control practices in Flanders' dairy industry.

PubMed

Vande Velde, F; Charlier, J; Hudders, L; Cauberghe, V; Claerebout, E

2018-05-01

Emerging anthelmintic resistance emphasizes the need for sustainable control approaches against gastrointestinal nematode (GIN) infections in cattle. The uptake of diagnostic methods for sustainable control could enable more informed treatments and reduce excessive anthelmintic use. Unfortunately, the adoption of such methods remains relatively poor. A better understanding of farmers' motivations and behaviour would help to develop applicable advises and communication strategies for sustainable worm control strategies. A previous study created a general model for adoption intention of GIN diagnostics on dairy farms and measured the most important factors driving this intention (Vande Velde et al., 2015). The current research aimed to dig deeper into this model for the beliefs underlying these factors, and to identify additional factors impelling this specific behaviour. Data were collected through 22 semi-structured interviews with dairy farmers. Using analytic induction analysis, data were moved between deduction and induction. Results show that the adoption process of diagnostic methods for GIN occurs through three different phases: adoption intention, actual adoption and maintenance. Low infection awareness and low priority ('top of mind') of the disease are important barriers for adopting sustainable GIN control. Secondly, farmer behaviour is guided by two important social norms: the opinion of their veterinarian and their fellow farmers. However, farmers hold an incongruent relationship with both norms throughout different stages of behaviour: they do not value other farmers' opinions as a positive reference (intention phase), but follow and mimic their behaviour as a group (action phase). The veterinarian is seen as the most important positive reference, but also the responsible actor for GIN control. As such, the farmers do not hold themselves responsible for implementing sustainable control strategies. Thirdly, different types of motivations influence different sorts of behaviours. Sustainable behaviour such as use of diagnostics will be influenced by moral motives, while management behaviour such as treatment is raised by more economic motives. Finally, not only performing, but also maintaining behaviour is important to fully address the adoption of sustainable control. As such, to maintain the adoption on farm, planning could be an important contribution. These insights can be used by animal health organizations and industry by exploiting motivations, social norms and planning to encourage the uptake of diagnostic approaches in GIN control. Copyright © 2018 Elsevier B.V. All rights reserved.

Ultralight monolithic photovoltaic modules of amorphous silicon alloys

NASA Astrophysics Data System (ADS)

Hanak, J. J.

A process has been developed for fabrication of roll-up, monolithic, photovoltaic (PV) modules made of amorphous silicon (a-Si) alloys. They consist of tandem-junction solar cells deposited by a continuous, roll-to-roll process onto thin, foil substrates of bare metal, high temperature resin, or metal coated with insulators. They have the following characteristics: size, up to 71 cm x 30.5 cm; total thickness, 8 to 50 microns, power-to-weight and power-to-volume ratios at AM1, 2.4 kW/kg and 6.5 MW/cu m, respectively. Cells of a-Si alloys are up to 100 times as tolerant to irradiation with 1 MeV protons than crystalline cells and the damage is easily annealable. The modules have high power density and stability, they are portable, stowable, deployable, retractable, tolerant to radiation and meteorite or projectile impact, and attractive for terrestrial and aerospace applications.

41 CFR 50-204.5 - Machine guarding.

Code of Federal Regulations, 2011 CFR

2011-07-01

... usually require point of operation guarding: Guillotine cutters. Shears. Alligator shears. Power presses. Milling machines. Power saws. Jointers. Portable power tools. Forming rolls and calenders. (d) Revolving...

Innovative Control Effectors (ICE)

DTIC Science & Technology

1996-01-01

Figure 4-1 shows the ICE high AOA roll performance goals compared to several current fighter aircraft. For this comparison, the 1-DOF roll equation ...9 ]Body The first bracketed term in equation (1) is recognizable as the expression for Cnpdyn. The second term represents control power for controls...deflected to provide Cn’MAX, trimmed in pitch and roll. The user selects the maximum sideslip to augment by specifying f. Equation (1) can be

Acute Effects of Lateral Thigh Foam Rolling on Arterial Tissue Perfusion Determined by Spectral Doppler and Power Doppler Ultrasound.

PubMed

Hotfiel, Thilo; Swoboda, Bernd; Krinner, Sebastian; Grim, Casper; Engelhardt, Martin; Uder, Michael; Heiss, Rafael U

2017-04-01

Hotfiel, T, Swoboda, B, Krinner, S, Grim, C, Engelhardt, M, Uder, M, and Heiss, R. Acute effects of lateral thigh foam rolling on arterial tissue perfusion determined by spectral Doppler and power Doppler ultrasound. J Strength Cond Res 31(4): 893-900, 2017-Foam rolling has been developed as a popular intervention in training and rehabilitation. However, evidence on its effects on the cellular and physiological level is lacking. The aim of this study was to assess the effect of foam rolling on arterial blood flow of the lateral thigh. Twenty-one healthy participants (age, 25 ± 2 years; height, 177 ± 9 cm; body weight, 74 ± 9 kg) were recruited from the medical and sports faculty. Arterial tissue perfusion was determined by spectral Doppler and power Doppler ultrasound, represented as peak flow (Vmax), time average velocity maximum (TAMx), time average velocity mean (TAMn), and resistive index (RI), and with semiquantitative grading that was assessed by 4 blindfolded investigators. Measurement values were assessed under resting conditions and twice after foam rolling exercises of the lateral thigh (0 and 30 minutes after intervention). The trochanteric region, mid portion, and distal tibial insertion of the lateral thigh were representative for data analysis. Arterial blood flow of the lateral thigh increased significantly after foam rolling exercises compared with baseline (p ≤ 0.05). We detected a relative increase in Vmax of 73.6% (0 minutes) and 52.7% (30 minutes) (p < 0.001), in TAMx of 53.2% (p < 0.001) and 38.3% (p = 0.002), and in TAMn of 84.4% (p < 0.001) and 68.2% (p < 0.001). Semiquantitative power Doppler scores at all portions revealed increased average grading of 1.96 after intervention and 2.04 after 30 minutes compared with 0.75 at baseline. Our results may contribute to the understanding of local physiological reactions to self-myofascial release.

Inflation with Whip-Shaped Suppressed Scalar Power Spectra

NASA Astrophysics Data System (ADS)

Hazra, Dhiraj Kumar; Shafieloo, Arman; Smoot, George F.; Starobinsky, Alexei A.

2014-08-01

Motivated by the idea that inflation occurs at the grand unified theory symmetry breaking scale, in this Letter we construct a new class of large field inflaton potentials where the inflaton starts with a power law potential; after an initial period of relatively fast roll that lasts until after a few e folds inside the horizon it transits to the attractor of the slow roll part of the potential with a lower power. Because of the initial fast roll stages of inflation, we find a suppression in scalar primordial power at large scales and at the same time the choice of the potential can provide us a tensor primordial spectrum with a high amplitude. This suppression in scalar power with a large tensor-to-scalar ratio helps us to reconcile the Planck and BICEP2 data in a single framework. We find that a transition from a cubic to quadratic form of inflaton potential generates an appropriate suppression in the power of the scalar primordial spectrum that provides a significant improvement in fit compared to the power law model when compared with Planck and BICEP2 data together. We calculate the extent of non-Gaussianity, specifically, the bispectrum for the best fit potential, and show that it is consistent with Planck bispectrum constraints.

Experiences with integrated concepts for the control of Haemonchus contortus in sheep and goats in the United States.

PubMed

Terrill, Thomas H; Miller, James E; Burke, Joan M; Mosjidis, Jorge A; Kaplan, Ray M

2012-05-04

The generally warm, moist environmental conditions in the southern United States (U.S.) are ideal for survival and growth of the egg and larval stages of Haemonchus contortus and other gastrointestinal nematodes (GIN) of sheep and goats. Consequently, infection with GIN is the greatest threat to economic small ruminant production in this region. With anthelmintic resistance now reaching epidemic proportions in small ruminants in the U.S., non-chemical control alternatives are critically needed. The Southern Consortium for Small Ruminant Parasite Control (SCSRPC) was formed in response to this crisis and over the last decade has successfully validated the use of several novel control technologies, including FAMACHA(©) for the implementation of targeted selective treatments (TST), copper oxide wire particles (COWP), nematode-trapping fungi, and grazing or feeding hay of the high-tannin perennial legume sericea lespedeza [Lespedeza cuneata (Dum.-Cours. G. Don)]. Producer attitudes toward GIN control in the U.S. have been shifting away from exclusive dependence upon anthelmintics toward more sustainable, integrated systems of parasite control. Some novel control technologies have been readily adopted by producers in combination with appropriate diagnostic tools, such as FAMACHA(©). Others techniques are still being developed, and will be available for producer use as they are validated. Although new drugs will likely be available to U.S. goat and sheep producers in the future, these will also be subject to development of anthelmintic resistance. Therefore, the adoption and implementation of sustainable GIN control principles will remain important. With emerging markets for grass-fed or organic livestock, there will continue to be a critical need for research and outreach on development and on-farm application of integrated GIN control systems for small ruminants in the U.S. for the foreseeable future. Copyright © 2011 Elsevier B.V. All rights reserved.

Evaluation of multiple low doses of copper oxide wire particles compared with levamisole for control of Haemonchus contortus in lambs.

PubMed

Burke, J M; Miller, J E

2006-06-30

High levels of anthelmintic resistance in gastrointestinal nematodes (GIN) of small ruminants have created the need for alternative approaches to parasite control. Copper oxide wire particles (COWP; 2g) have proven effective in decreasing GIN infection in lambs. However, the risk of copper toxicity has limited the usefulness of this approach. Recently, smaller doses (0.5 and 1g) have proven effective in GIN control, reducing the risk of toxicity. The objective of this study was to examine the effectiveness and risk of toxicity using multiple small doses of COWP for GIN control in lambs between weaning and market weight. Dorper crossbred ram lambs were orally administered levamisole (Levasol, 8.0mg/kg; n=8), 0.5g (n=9), or 1g COWP (n=9) at weaning (Day 0; 118+/-2 days of age; late May 2005) and again at 6-week intervals for a total of four treatments. A pooled fecal culture determined that Haemonchus contortus was the predominant gastrointestinal parasite at weaning. Lambs grazed bermudagrass pastures and were supplemented with up to 500g corn/soybean meal and free choice trace mineralized salt. Fecal egg counts (FEC), packed cell volume (PCV), and plasma aspartate aminotransferase (AST) activity were determined every 14 days and lambs weighed every 28 days. GIN infection reached a peak at Day 42 (high FEC, low PCV). COWP effectively reduced FEC on Days 0 and 42 compared with the previous week, but did not reduce FEC on Days 84 and 126 (treatment by time interaction, P<0.005). Plasma AST activity and weight gains were similar among treatment groups throughout the study period. Concentrations of copper in the liver on Day 155 were greater in COWP-treated lambs (P<0.001), but all concentrations were normal. Multiple doses of COWP were as effective as levamisole for control of H. contortus without risk of copper toxicity.

Genomic instability in the epidermis induced by atomic bomb (A-bomb) radiation: a long-lasting health effect in A-bomb survivors.

PubMed

Naruke, Yuki; Nakashima, Masahiro; Suzuki, Keiji; Kondo, Hisayoshi; Hayashi, Tomayoshi; Soda, Midori; Sekine, Ichiro

2009-08-15

Radiation etiology is suggested in the occurrence of basal cell carcinoma (BCC) of the skin among atomic bomb (A-bomb) survivors. Any genotoxicity, including ionizing radiation, can induce a DNA damage response (DDR), leading to genomic instability (GIN), which allows the accumulation of mutations during tumorigenesis. In this study, the authors evaluated the presence of GIN in the epidermis of survivors as a late effect of A-bomb radiation. In total, 146 BCCs, including 23 cases arising from nonexposed skin, were identified in survivors from 1968 to 1999. The incidence rate (IR) of BCC was calculated with stratification by distance in kilometers from the hypocenter (< or =1.5 km, 1.6-2.9 km, and > or =3 km). Nineteen epidermal samples surrounding BCC at the nonexposed sites were collected and tested for p53 binding protein 1 (53BP1) expression with immunofluorescence. 53BP1 rapidly forms nuclear foci at the sites of DNA double strand breaks (DSBs). Because 1 manifestation of GIN is the induction of endogenous DSBs, the level of 53BP1-focus formation (DDR type) can be considered as a marker for GIN. : The incidence rate of BCC increased significantly as exposure distance approached the hypocenter. Of the 7 epidermal samples from the proximal group (< or =1.5 km), 5 samples predominantly expressed DDR and an abnormal type of 53BP1 expression. In contrast, 4 of 5 samples from the distal group (> or =3 km) and all samples from the control group predominantly expressed the stable type of 53BP1 expression in the epidermis. : The current results demonstrated the endogenous activation of DDR in the epidermis surrounding BCC in the proximal group, suggesting the presence of a GIN in the survivors as a late effect of A-bomb radiation, which may indicate a predisposition to cancer.

29 CFR 570.59 - Occupations involved in the operations of power-driven metal forming, punching, and shearing...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., or bending rolls; and hot or cold rolling mills. (ii) All pressing or punching machines, such as... presses; and plate punches. (iii) All bending machines, such as apron brakes and press brakes. (iv) All...

Running of featureful primordial power spectra

NASA Astrophysics Data System (ADS)

Gariazzo, Stefano; Mena, Olga; Miralles, Victor; Ramírez, Héctor; Boubekeur, Lotfi

2017-06-01

Current measurements of the temperature and polarization anisotropy power spectra of the cosmic microwave background (CMB) seem to indicate that the naive expectation for the slow-roll hierarchy within the most simple inflationary paradigm may not be respected in nature. We show that a primordial power spectrum with localized features could in principle give rise to the observed slow-roll anarchy when fitted to a featureless power spectrum. From a model comparison perspective, and assuming that nature has chosen a featureless primordial power spectrum, we find that, while with mock Planck data there is only weak evidence against a model with localized features, upcoming CMB missions may provide compelling evidence against such a nonstandard primordial power spectrum. This evidence could be reinforced if a featureless primordial power spectrum is independently confirmed from bispectrum and/or galaxy clustering measurements.

Inflation with a smooth constant-roll to constant-roll era transition

NASA Astrophysics Data System (ADS)

Odintsov, S. D.; Oikonomou, V. K.

2017-07-01

In this paper, we study canonical scalar field models, with a varying second slow-roll parameter, that allow transitions between constant-roll eras. In the models with two constant-roll eras, it is possible to avoid fine-tunings in the initial conditions of the scalar field. We mainly focus on the stability of the resulting solutions, and we also investigate if these solutions are attractors of the cosmological system. We shall calculate the resulting scalar potential and, by using a numerical approach, we examine the stability and attractor properties of the solutions. As we show, the first constant-roll era is dynamically unstable towards linear perturbations, and the cosmological system is driven by the attractor solution to the final constant-roll era. As we demonstrate, it is possible to have a nearly scale-invariant power spectrum of primordial curvature perturbations in some cases; however, this is strongly model dependent and depends on the rate of the final constant-roll era. Finally, we present, in brief, the essential features of a model that allows oscillations between constant-roll eras.

The Gas Monitoring of the Besiii Drift Chamber

NASA Astrophysics Data System (ADS)

Wang, Xianggao; Chen, Chang; Chen, Yuanbo; Wu, Zhi; Gu, Yunting; Ma, Xiaoyan; Jin, Yan; Liu, Rongguang; Tang, Xiao; Wang, Lan; Zhu, Qiming

Two monitoring proportional counters (MPCs), installed at the inlet and outlet of the gas system of BESIII drift chamber (DC), were used to monitor the operation of the BESIII DC successfully and effectively as reported in this paper. The ratio of Gout/Gin (full energy photoelectron peak position of 55Fe 5.9 keV X-ray in inlet MPC as Gin and outlet MPC as Gout) is used as the main monitoring parameter. The MPC method is very useful for the gas detector system.

Summary Report on Federal Laboratory Technology Transfer: FY 2003 Activity Metrics and Outcomes. 2004 Report to the President and the Congress under the Technology Transfer and Commercialization Act

DTIC Science & Technology

2004-12-01

Agency, FY 1999-2003 Table 1.1 – Overview of the Types of Information on Federal lab Technology Transfer Collected in the...invention disclosure, patenting, and licensing. Table 1.1 – Overview of the Types of Information on Federal Lab Technology Transfer Collected in...results. In addition, ARS hosts a Textile Manufacturing Symposium and a Cotton Ginning Symposium at gin and textile labs to benefit county extension

Determination of rolling resistance coefficient based on normal tyre stiffness

NASA Astrophysics Data System (ADS)

Rykov, S. P.; Tarasuyk, V. N.; Koval, V. S.; Ovchinnikova, N. I.; Fedotov, A. I.; Fedotov, K. V.

2018-03-01

The purpose of the article is to develop analytical dependence of wheel rolling resistance coefficient based on the mathematical description of normal tyre stiffness. The article uses the methods of non-holonomic mechanics and plane section methods. The article shows that the abscissa of gravity center of tyre stiffness expansion by the length of the contact area is the shift of normal road response. It can be used for determining rolling resistance coefficient. When determining rolling resistance coefficient using ellipsis and power function equations, one can reduce labor costs for testing and increase assessment accuracy.

Analysis of Real Ship Rolling Dynamics under Wave Excitement Force Composed of Sums of Cosine Functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Y. S.; Cai, F.; Xu, W. M.

2011-09-28

The ship motion equation with a cosine wave excitement force describes the slip moments in regular waves. A new kind of wave excitement force model, with the form as sums of cosine functions was proposed to describe ship rolling in irregular waves. Ship rolling time series were obtained by solving the ship motion equation with the fourth-order-Runger-Kutta method. These rolling time series were synthetically analyzed with methods of phase-space track, power spectrum, primary component analysis, and the largest Lyapunove exponent. Simulation results show that ship rolling presents some chaotic characteristic when the wave excitement force was applied by sums ofmore » cosine functions. The result well explains the course of ship rolling's chaotic mechanism and is useful for ship hydrodynamic study.« less

Analytical method for establishing indentation rolling resistance

NASA Astrophysics Data System (ADS)

Gładysiewicz, Lech; Konieczna, Martyna

2018-01-01

Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging

NASA Astrophysics Data System (ADS)

Kang, Hwiwon; Park, Hyejin; Park, Yongsu; Jung, Minhoon; Kim, Byung Chul; Wallace, Gordon; Cho, Gyoujin

2014-06-01

Integration of sensing capabilities with an interactive signage through wireless communication is enabling the development of smart packaging wherein wireless (13.56 MHz) power transmission is used to interlock the smart packaging with a wireless (13.56 MHz) reader or a smart phone. Assembly of the necessary componentry for smart packaging on plastic or paper foils is limited by the manufacturing costs involved with Si based technologies. Here, the issue of manufacturing cost for smart packaging has been obviated by materials that allow R2R (roll-to-roll) gravure in combination with R2R coating processes to be employed. R2R gravure was used to print the wireless power transmission device, called rectenna (antenna, diode and capacitor), and humidity sensor on poly(ethylene terephtalate) (PET) films while electrochromic signage units were fabricated by R2R coating. The signage units were laminated with the R2R gravure printed rectenna and sensor to complete the prototype smart packaging.

Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging

PubMed Central

Kang, Hwiwon; Park, Hyejin; Park, Yongsu; Jung, Minhoon; Kim, Byung Chul; Wallace, Gordon; Cho, Gyoujin

2014-01-01

Integration of sensing capabilities with an interactive signage through wireless communication is enabling the development of smart packaging wherein wireless (13.56 MHz) power transmission is used to interlock the smart packaging with a wireless (13.56 MHz) reader or a smart phone. Assembly of the necessary componentry for smart packaging on plastic or paper foils is limited by the manufacturing costs involved with Si based technologies. Here, the issue of manufacturing cost for smart packaging has been obviated by materials that allow R2R (roll-to-roll) gravure in combination with R2R coating processes to be employed. R2R gravure was used to print the wireless power transmission device, called rectenna (antenna, diode and capacitor), and humidity sensor on poly(ethylene terephtalate) (PET) films while electrochromic signage units were fabricated by R2R coating. The signage units were laminated with the R2R gravure printed rectenna and sensor to complete the prototype smart packaging. PMID:24953037

Fully roll-to-roll gravure printable wireless (13.56 MHz) sensor-signage tags for smart packaging.

PubMed

Kang, Hwiwon; Park, Hyejin; Park, Yongsu; Jung, Minhoon; Kim, Byung Chul; Wallace, Gordon; Cho, Gyoujin

2014-06-23

Integration of sensing capabilities with an interactive signage through wireless communication is enabling the development of smart packaging wherein wireless (13.56 MHz) power transmission is used to interlock the smart packaging with a wireless (13.56 MHz) reader or a smart phone. Assembly of the necessary componentry for smart packaging on plastic or paper foils is limited by the manufacturing costs involved with Si based technologies. Here, the issue of manufacturing cost for smart packaging has been obviated by materials that allow R2R (roll-to-roll) gravure in combination with R2R coating processes to be employed. R2R gravure was used to print the wireless power transmission device, called rectenna (antenna, diode and capacitor), and humidity sensor on poly(ethylene terephtalate) (PET) films while electrochromic signage units were fabricated by R2R coating. The signage units were laminated with the R2R gravure printed rectenna and sensor to complete the prototype smart packaging.

Tannin containing legumes as a model for nutraceuticals against digestive parasites in livestock.

PubMed

Hoste, H; Torres-Acosta, J F J; Sandoval-Castro, C A; Mueller-Harvey, I; Sotiraki, S; Louvandini, H; Thamsborg, S M; Terrill, T H

2015-08-15

Parasitic infections with gastrointestinal nematodes (GINs) still represent a worldwide major pathological threat associated with the outdoor production of various livestock species. Because of the widespread resistance to synthetic chemical anthelmintics, there is a strong impetus to explore novel approaches for a more integrated management of these infections. The use of nutraceuticals in the control of GINs is one of the alternatives which has been widely studied for 20 years. The objectives of this review are: (i) to define and illustrate the concept of 'nutraceutical' in the context of veterinary parasitology based on data obtained on the most studied models to control GINs in small ruminants, the tannin-containing legumes (Fabaceae); (ii) to illustrate how the 'nutraceutical concept' could be expanded to other plants, other livestock production systems and other GI parasitic diseases, and (iii) to explain how this concept is opening up new research fields for better understanding the interactions between the host, the digestive parasites and the environment. Copyright © 2015 Elsevier B.V. All rights reserved.

29 CFR 1910.212 - General requirements for all machines.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Alligator shears. (d) Power presses. (e) Milling machines. (f) Power saws. (g) Jointers. (h) Portable power tools. (i) Forming rolls and calenders. (4) Barrels, containers, and drums. Revolving drums, barrels...

3D Model of the McGinness Hills Geothermal Area

DOE Data Explorer

Faulds, James E.

2013-12-31

The McGinness Hills geothermal system lies in a ~8.5 km wide, north-northeast trending accommodation zone defined by east-dipping normal faults bounding the Toiyabe Range to the west and west-dipping normal faults bounding the Simpson Park Mountains to the east. Within this broad accommodation zone lies a fault step-over defined by north-northeast striking, west-dipping normal faults which step to the left at roughly the latitude of the McGinness Hills geothermal system. The McGinness Hills 3D model consists of 9 geologic units and 41 faults. The basal geologic units are metasediments of the Ordovician Valmy and Vininni Formations (undifferentiated in the model) which are intruded by Jurassic granitic rocks. Unconformably overlying is a ~100s m-thick section of Tertiary andesitic lava flows and four Oligocene-to-Miocene ash-flow tuffs: The Rattlesnake Canyon Tuff, tuff of Sutcliffe, the Cambell Creek Tuff and the Nine Hill tuff. Overlying are sequences of pre-to-syn-extensional Quaternary alluvium and post-extensional Quaternary alluvium. 10-15º eastward dip of the Tertiary stratigraphy is controlled by the predominant west-dipping fault set. Geothermal production comes from two west dipping normal faults in the northern limb of the step over. Injection is into west dipping faults in the southern limb of the step over. Production and injection sites are in hydrologic communication, but at a deep level, as the northwest striking fault that links the southern and northern limbs of the step-over has no permeability.

Efficacy of copper oxide wire particles against gastrointestinal nematodes in sheep and goats.

PubMed

Soli, F; Terrill, T H; Shaik, S A; Getz, W R; Miller, J E; Vanguru, M; Burke, J M

2010-02-26

Profitable sheep and goat production in the USA is severely limited by gastrointestinal nematode (GIN) parasitism, particularly by Haemonchus contortus. Copper oxide wire particles (COWP) have anti-parasitic properties in the diet of small ruminants, but efficacy of COWP may differ between sheep and goats. In a study with weaned kids (Kiko x Spanish cross, 6 months old) and lambs (Katahdin or Dorper x Blackface crosses, 5 months old), grazing the same pasture area in Central Georgia, 2g of COWP in a gel capsule was given to half the animals of each species, while the other half were given no COWP. Fecal and blood samples were taken weekly to determine GIN fecal egg counts (FEC) and blood packed cell volume (PCV). After COWP treatment, animals were grazed for 4 weeks and then slaughtered, with adult GIN recovered from the abomasum and small intestines for counting and identification to species. For both sheep and goats, COWP treatment reduced EPG (P<0.05), increased PCV (P<0.05), and lowered abomasal GIN numbers (P<0.05). For EPG, these differences were 82.5 and 90.5% for sheep and goats, respectively, 26 days after treatment, while adult H. contortus were 67.2 and 85.8% lower for COWP-treated sheep and goats, respectively. In this study, COWP treatment was equally effective against H. contortus infection in lambs and kids and appears to be an effective method of controlling H. contortus infection for up to 6 weeks in small ruminants following weaning.

Using Duddingtonia flagrans in calves under an organic milk farm production system in the Mexican tropics.

PubMed

Ortiz Pérez, Diego Otoniel; Sánchez Muñoz, Bernardo; Nahed Toral, José; Orantes Zebadúa, Miguel Ángel; Cruz López, José Luis; Reyes García, María Eréndira; Mendoza de Gives, Pedro

2017-04-01

The reduction of the gastrointestinal nematode (GIN) larvae population in faeces of cattle treated with Duddingtonia flagrans chlamydospores on a farm under an organic production system in Chiapas, Mexico, was assessed. Seventeen Cebu/Swiss crossbreed grazing calves naturally infected with GIN, were randomly distributed into two groups and treated as follows: Group 1, an oral administration of 2 × 10 6 D. flagrans chlamydospores/kg BW, every two days for 30 days; group 2, Control, without any treatment. Results indicated that the epg values in both groups remained similar (p > 0.05). The average number of (L 3 ) from coprocultures from the group treated with D. flagrans had an important reduction (53.8%) with respect to the control group and it reached 75.3% maximum larval reduction at the 14th sampling; although, no statistic significance was observed (p > 0.05). Likewise, the average of larvae (L3) recovered from grass corresponding to the animals treated with D. flagrans diminished at 25.1% with respect to the control group (p > 0.05). A mixture of GIN genera including Strongyloides sp., Haemonchus sp., Cooperia sp., Trichostrongylus sp., Oesophagostomum sp. and Mecistocirrus sp., were identified from coprocultures. It was concluded that treatment with D. flagrans chlamydospores reduces the GIN larvae population in grass and in faeces of calves maintained under an organic milk production system. Copyright © 2017 Elsevier Inc. All rights reserved.

Discovery of the youngest sex chromosomes reveals first case of convergent co-option of ancestral autosomes in turtles.

PubMed

Montiel, E E; Badenhorst, D; Tamplin, J; Burke, R L; Valenzuela, N

2017-02-01

Most turtle species possess temperature-dependent sex determination (TSD), but genotypic sex determination (GSD) has evolved multiple times independently from the TSD ancestral condition. GSD in animals typically involves sex chromosomes, yet the sex chromosome system of only 9 out of 18 known GSD turtles has been characterized. Here, we combine comparative genome hybridization (CGH) and BAC clone fluorescent in situ hybridization (BAC FISH) to identify a macro-chromosome XX/XY system in the GSD wood turtle Glyptemys insculpta (GIN), the youngest known sex chromosomes in chelonians (8-20 My old). Comparative analyses show that GIN-X/Y is homologous to chromosome 4 of Chrysemys picta (CPI) painted turtles, chromosome 5 of Gallus gallus chicken, and thus to the X/Y sex chromosomes of Siebenrockiella crassicollis black marsh turtles. We tentatively assign the gene content of the mapped BACs from CPI chromosome 4 (CPI-4) to GIN-X/Y. Chromosomal rearrangements were detected in G. insculpta sex chromosome pair that co-localize with the male-specific region of GIN-Y and encompass a gene involved in sexual development (Wt1-a putative master gene in TSD turtles). Such inversions may have mediated the divergence of G. insculpta sex chromosome pair and facilitated GSD evolution in this turtle. Our results illuminate the structure, origin, and evolution of sex chromosomes in G. insculpta and reveal the first case of convergent co-option of an autosomal pair as sex chromosomes within chelonians.

Prospective systematic review registration: perspective from the Guidelines International Network (G-I-N).

PubMed

Van der Wees, Philip; Qaseem, Amir; Kaila, Minna; Ollenschlaeger, Guenter; Rosenfeld, Richard

2012-02-09

Clinical practice and public health guidelines are important tools for translating research findings into practice with the aim of assisting health practitioners as well as patients and consumers in health behavior and healthcare decision-making. Numerous programs for guideline development exist around the world, with growing international collaboration to improve their quality. One of the key features in developing trustworthy guidelines is that recommendations should be based on high-quality systematic reviews of the best available evidence. The review process used by guideline developers to identify and grade relevant evidence for developing recommendations should be systematic, transparent and unbiased. In this paper, we provide an overview of current international developments in the field of practice guidelines and methods to develop guidelines, with a specific focus on the role of systematic reviews. The Guidelines International Network (G-I-N) aims to stimulate collaboration between guideline developers and systematic reviewers to optimize the use of available evidence in guideline development and to increase efficiency in the guideline development process. Considering the significant benefit of systematic reviews for the guideline community, the G-I-N Board of Trustees supports the international prospective register of systematic reviews (PROSPERO) initiative. G-I-N also recently launched a Data Extraction Resource (GINDER) to present and share data extracted from individual studies in a standardized template. PROSPERO and GINDER are complementary tools to enhance collaboration between guideline developers and systematic reviewers to allow for alignment of activities and a reduction in duplication of effort.

Examination of commercially available copper oxide wire particles in combination with albendazole for control of gastrointestinal nematodes in lambs.

PubMed

Burke, J M; Miller, J E; Terrill, T H; Smyth, E; Acharya, M

2016-01-15

Control of gastrointestinal nematodes (GIN) remains a critical issue due to the prevalence of anthelmintic resistance. The objective of the experiment was to determine the efficacy of copper oxide wire particles (COWP) from three commercial sources and a combination of COWP and albendazole to control GIN and/or Haemonchus contortus in lambs. Naturally infected Katahdin lambs in early June 2014 and 2015 were randomly assigned to receive no COWP (CON; n=9 and 12) or 2g COWP in a gel capsule as Copasure(®) (COP; n=4 and 17; Animax Ltd.), copper oxide-wire form (AUS; n=7 in 2014 only; Pharmplex), Ultracruz™ (ULT; n=8 and 15; Santa Cruz Animal Health™), no COWP and albendazole (CON+alb; n=10 in 2015 only; 15mg/kg BW; Valbazen(®); Zoetis Animal Health), or COWP+alb (n=7 and 11; in 2014, lambs were administered alb on day 3). Lambs grazed grass pastures as a group and were supplemented with 227g/lamb daily of a commercial grain mix (15% crude protein) and the same amount of alfalfa pellets. Feces were collected on days 0 (day of COWP treatment), 7, and 14 for determination of fecal egg counts (FEC). Pooled (2014) or pooled treatment group feces were cultured on days 0, 7, and 14 (2015 only) to determine GIN genera. Data were analyzed using repeated measures in a mixed model, and FEC were log transformed. The predominant GIN on day 0 was H. contortus (87%) in 2014, and there was a mixed population in 2015. The mean FEC was reduced by day 7 in AUS and ULT lambs (treatment×day, P=0.001), and all of the COWP products were similar. By day 14, the AUS FEC were lower than the CON and COP groups. When examining the combination of COWP and synthetic anthelmintic, the FEC of COWP+alb were reduced to nearly 0eggs/g (back-transformed) and lower than the other groups (treatment×day, P=0.001). The percentage of H. contortus in cultured feces was reduced to a greater extent in the COWP than CON or CON+alb groups of lambs. In a mixed GIN population, the COWP products appeared to be similar in efficacy and using a combination of COWP+alb increased the efficacy not only against H. contortus, but all GIN genera present, offering options in the face of resistance to benzimidazoles. Published by Elsevier B.V.

Use of a mixed sericea lespedeza and grass pasture system for control of gastrointestinal nematodes in lambs and kids.

PubMed

Burke, J M; Miller, J E; Mosjidis, J A; Terrill, T H

2012-05-25

Because of a high prevalence of anthelmintic resistance and consumer demand for chemical free meat products, management tools to minimize the need for deworming are needed. The objective was to examine the effectiveness of grazing sericea lespedeza (SL) in a mixed grass or a pure forage system for control of gastrointestinal nematodes (GIN); in other words pasture systems included grass, grass plus SL, or SL alone (Experiments 2 and 3). Selective use of copper oxide wire particles (COWP) based on the FAMACHA(©) system was used to aid in GIN control. In Experiment 1, lambs co-grazed bermudagrass (BG; n=21) or SL in a mixed grass pasture (SLM; n=22) with dams for 14 days. In Experiment 2, lambs grazed BG (n=14), SLM (n=13), or pure SL (SLP; n=13) pastures for 56 days. In Experiment 3, doe kids grazed BG (n=12), SLM (n=13), or SLP (n=13) for 84 days. Animals were fed a 16% crude protein supplement based on NRC requirements and estimated forage quality of pastures, so that 454, 389, and 200 g/lamb (Experiment 2), or 454, 300, and 150 g of supplement/goat (Experiment 3) was fed to BG, SLM, and SLP, respectively. Animals were dewormed with COWP if FAMACHA(©) was >3. Coprocultures were conducted to identify GIN genus. In Experiment 1, FEC were reduced in lambs grazing SLM compared with BG pastures. In Experiment 2, FEC were reduced in SLP compared with BG lambs on all days, and reduced in SLM compared with BG lambs on day 56. Initially, Haemonchus contortus was the predominant nematode, but the population shifted to other species in the SL groups by the end of the study. The mean number of dewormings/lamb was 0.71, 0.20, and 0.21±0.13 for BG, SLM, and SLP groups, respectively. In goats in Experiment 3, Trichostrongylus spp. was the predominant nematode in May and June and H. contortus in July. There was little meaningful effect of forage treatments on GIN infection in kids. Because H. contortus was not the predominant nematode in kids, the integrated approaches used may not have been effective in controlling GIN. Grazing SL was effective for GIN control in lambs in early summer, but the effect was delayed in lambs grazing a mixed SL/grass pasture unless lambs initially grazed with dams. An integrated approach used that included SL grazing and COWP for deworming was effective in lambs. Published by Elsevier B.V.

Adaptive wing static aeroelastic roll control

NASA Astrophysics Data System (ADS)

Ehlers, Steven M.; Weisshaar, Terrence A.

1993-09-01

Control of the static aeroelastic characteristics of a swept uniform wing in roll using an adaptive structure is examined. The wing structure is modeled as a uniform beam with bending and torsional deformation freedom. Aerodynamic loads are obtained from strip theory. The structure model includes coefficients representing torsional and bending actuation provided by embedded piezoelectric material layers. The wing is made adaptive by requiring the electric field applied to the piezoelectric material layers to be proportional to the wing root loads. The proportionality factor, or feedback gain, is used to control static aeroelastic rolling properties. Example wing configurations are used to illustrate the capabilities of the adaptive structure. The results show that rolling power, damping-in-roll and aileron effectiveness can be controlled by adjusting the feedback gain. And that dynamic pressure affects the gain required. Gain scheduling can be used to set and maintain rolling properties over a range of dynamic pressures. An adaptive wing provides a method for active aeroelastic tailoring of structural response to meet changing structural performance requirements during a roll maneuver.

Final Technical Report: Development of an Abrasion-Resistant Antisoiling Coating for Front-Surface Reflectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gee, Randy C.

A high-performance reflective film has been successfully developed for Concentrating Solar Power (CSP) solar concentrators. Anti-soiling properties and abrasion resistance have been incorporated into the reflector to reduce reflector cleaning costs and to enhance durability. This approach has also resulted in higher reflectance and improved specularity. From the outset of this project we focused on the use of established high-volume roll-to-roll manufacturing techniques to achieve low manufacturing costs on a per ubit area basis. Roll-to-roll manufacturng equipment has a high capital cost so there is an entire industry devoted to roll-to-roll “toll” manufacturing, where the equipment is operated “around themore » clock” to produce a multitude of products for a large variety of uses. Using this approach, the reflective film can be manufactured by toll coaters/converters on an as-needed basis.« less

The observational constraint on constant-roll inflation

NASA Astrophysics Data System (ADS)

Gao, Qing

2018-07-01

We discuss the constant-roll inflation with constant ɛ2 and constant \\bar η . By using the method of Bessel function approximation, the analytical expressions for the scalar and tensor power spectra, the scalar and tensor spectral tilts, and the tensor to scalar ratio are derived up to the first order of ɛ1. The model with constant ɛ2 is ruled out by the observations at the 3σ confidence level, and the model with constant \\bar η is consistent with the observations at the 1σ confidence level. The potential for the model with constant \\bar η is also obtained from the Hamilton-Jacobi equation. Although the observations constrain the constant-roll inflation to be the slow-roll inflation, the n s- r results from the constant-roll inflation are not the same as those from the slow-roll inflation even when \\bar η 0.01.

Estimates of the effectiveness of automatic control in alleviating wake vortex induced roll excursions

NASA Technical Reports Server (NTRS)

Tinling, B. E.

1977-01-01

Estimates of the effectiveness of a model following type control system in reducing the roll excursion due to a wake vortex encounter were obtained from single degree of freedom computations with inputs derived from the results of wind tunnel, flight, and simulation experiments. The analysis indicates that the control power commanded by the automatic system must be roughly equal to the vortex induced roll acceleration if effective limiting of the maximum bank angle is to be achieved.

[Alcohol consumption as portrayed in William Hogarth's prints Beer Street and Gin Lane and in the works of John Wesley: similarities and differences].

PubMed

Renders, Helmut

2012-12-01

The article compares William Hogarth's Gin Lane and Beer Street with texts by his contemporary John Wesley, spiritus rector of the Methodist movement. Although Hogarth had portrayed the Methodist religious movement in some of his prints as dangerously enthusiastic, both men defended a similar agenda concerning alcohol consumption. The similarities in their two ways of understanding the issue can be explained by culturally established customs, while distinct social outlooks can account for their differences.

10. Photocopy of photograph showing the three Walker sisters ginning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Photocopy of photograph showing the three Walker sisters ginning cotton. Misses Hettie, Martha and Louisa are from left to right. The original photograph was taken on May 21, 1936 by Edouard E. Exline and is one of five photographs in the album, 'A Sketch of Mountain Life: Great Smoky Mountains National Park', compiled by Edouard E. Exline and C.S. Grossman. The album is on file at the Great Smoky Mountains National Park; the photograph number is III-A-HSE-9642. - Walker Family Farm (General views), Gatlinburg, Sevier County, TN

Systematics of constant roll inflation

NASA Astrophysics Data System (ADS)

Anguelova, Lilia; Suranyi, Peter; Wijewardhana, L. C. R.

2018-02-01

We study constant roll inflation systematically. This is a regime, in which the slow roll approximation can be violated. It has long been thought that this approximation is necessary for agreement with observations. However, recently it was understood that there can be inflationary models with a constant, and not necessarily small, rate of roll that are both stable and compatible with the observational constraint ns ≈ 1. We investigate systematically the condition for such a constant-roll regime. In the process, we find a whole new class of inflationary models, in addition to the known solutions. We show that the new models are stable under scalar perturbations. Finally, we find a part of their parameter space, in which they produce a nearly scale-invariant scalar power spectrum, as needed for observational viability.

Multi-hundred kilowatt roll ring assembly

NASA Technical Reports Server (NTRS)

Jacobson, Peter E.

1985-01-01

A program was completed to develop an evaluation unit of a high power rotary transfer device for potential application in a space environment. This device was configured around a Roll Ring concept which performs the same function as a slip ring/brush assembly with a rolling instead of sliding interface. An eight circuit Evaluation Unit (EU) and a portable Test Fixture (TF) were designed and fabricated. The EU was designed to transfer currents to 200 amperes at a potential of as high as 500 volts for an ultimate 100 kW/circuit transfer capability. The EU was evaluated in vacuum at dc transfer currents of 50 to 200 amperes at voltages to 10 volts and at 500 volts at 2 amperes. Power transfer to levels of 2 kW through each of the eight circuits was completed. Power transfer in vacuum at levels and efficiencies not previously achieved was demonstrated. The terminal-to-terminal resistance was measured to be greater than 0.42 milliohms which translates to an efficiency at 100 kW of 99.98 percent. The EU and TF have been delivered to the Lewis Research Center and are being prepared tor testing at increased power levels and for life testing, which will include both dc and ac power.

An Acute Bout of Self-Myofascial Release in the Form of Foam Rolling Improves Performance Testing

PubMed Central

PEACOCK, COREY A.; KREIN, DARREN D.; SILVER, TOBIN A.; SANDERS, GABRIEL J.; VON CARLOWITZ, KYLE-PATRICK A.

2014-01-01

Recent developments in the strength and conditioning field have shown the incorporation of foam rolling self-myofascial release in adjunct with a dynamic warm-up. This is thought to improve overall training performance; however, minimal research exists supporting this theory. Therefore, determining if an acute bout of foam rolling self-myofascial release in addition to a dynamic warm-up could influence performance is of importance. In order to do so, eleven athletically trained male subjects participated in a two condition, counterbalanced, crossover within-subjects study comparing two particular warm-up routines. The two warm-up routines compared were a total-body dynamic warm-up (DYN) and a total-body dynamic warm-up in adjunct with a self-myofascial release, total-body foam rolling session (SMR). Following each warm-up condition, subjects performed tests of flexibility, power, agility, strength, and speed. Paired samples T-tests were utilized to determine if there were any significant differences in test results between conditions (DYN vs. SMR). The data indicated that SMR was effective at improving power, agility, strength, and speed when compared to DYN (P ≤ 0.024). A warm-up routine consisting of both a dynamic warm-up and a self-myofascial release, total-body foam rolling session resulted in overall improvements in athletic performance testing. PMID:27182404

Spur-Gear-System Efficiency at Part and Full Load

NASA Technical Reports Server (NTRS)

Anderson, N. E.; Loewenthal, S. H.

1980-01-01

A simple method for predicting the part- and full-load power loss of a steel spur gearset of arbitrary geometry supported by ball bearings is described. The analysis algebraically accounts for losses due to gear sliding, rolling traction, and windage in addition to support-ball-bearing losses. The analysis compares favorably with test data. A theoretical comparison of the component losses indicates that losses due to gear rolling traction, windage, and support bearings are significant and should be included along with gear sliding loss in a calculation of gear-system power loss.

Spin analysis of concentrated traction contacts

NASA Technical Reports Server (NTRS)

Loewenthal, S. H.

1983-01-01

Spin, the result of a mismatch in contact radii on either side of the point of rolling, has a detrimental effect on traction contact performance. It occurs in concentrated contacts having conical or contoured rolling elements, such as those in traction drives or angular contact bearings, and is responsible for an increase in contact heating and power loss. The kinematics of spin producing contact geometries and the subsequent effect on traction and power loss are investigated. The influence of lubricant traction characteristics and contact geometries that minimize spin are also addressed.

Haemonchotolerance in West African Dwarf goats: contribution to sustainable, anthelmintics-free helminth control in traditionally managed Nigerian dwarf goats

PubMed Central

Chiejina, Samuel N.; Behnke, Jerzy M.; Fakae, Barineme B.

2015-01-01

West African Dwarf (WAD) goats are extremely important in the rural village economy of West Africa, but still little is known about their biology, ecology and capacity to cope with gastrointestinal nematode (GIN) infections. Here, we summarise the history of this breed and explain its economic importance in rural West Africa. We review recent work showing that Nigerian WAD goats are highly trypanotolerant and resist infections with Haemonchus contortus more effectively than other breeds of domestic goat (haemonchotolerance). We believe that haemonchotolerance is largely responsible for the generally low level GIN infections and absence of clinical haemonchosis in WADs under field conditions, and has contributed to the relatively successful and sustainable, anthelmintics-free, small-scale system of goat husbandry in Nigeria’s humid zone, and is immunologically based and genetically controlled. If haemonchotolerance can be shown to be genetically controlled, it should be possible to exploit the underlying genes to improve GIN resistance among productive fibre and milk producing breeds of goats, most of which are highly susceptible to nematode infections. Genetic resistance to GIN and trypanosome infections would obviate the need for expensive chemotherapy, mostly unaffordable to small-holder farmers in Africa, and a significant cost of goat husbandry in more developed countries. Either introgression of resistance alleles into susceptible breeds by conventional breeding, or transgenesis could be used to develop novel parasite-resistant, but highly productive breeds, or to improve the resistance of existing breeds, benefitting the local West African rural economy as well as global caprine livestock agriculture. PMID:25744655

Human confort response to random motions with a dominant rolling motion

NASA Technical Reports Server (NTRS)

Stone, R. W., Jr.

1975-01-01

Subjective ride comfort response ratings were measured on a visual motion simulator with rolling velocity inputs with various power spectra shapes and magnitudes. The results show only little influence of spectra shape on comfort response. The effects of magnitude on comfort response indicate the applicability of psychophysical precepts for comfort modeling.

Impact of vertical wind shear on roll structure in idealized hurricane boundary layers

NASA Astrophysics Data System (ADS)

Wang, Shouping; Jiang, Qingfang

2017-03-01

Quasi-two-dimensional roll vortices are frequently observed in hurricane boundary layers. It is believed that this highly coherent structure, likely caused by the inflection-point instability, plays an important role in organizing turbulent transport. Large-eddy simulations are conducted to investigate the impact of wind shear characteristics, such as the shear strength and inflection-point level, on the roll structure in terms of its spectral characteristics and turbulence organization. A mean wind nudging approach is used in the simulations to maintain the specified mean wind shear without directly affecting turbulent motions. Enhancing the radial wind shear expands the roll horizontal scale and strengthens the roll's kinetic energy. Increasing the inflection-point level tends to produce a narrow and sharp peak in the power spectrum at the wavelength consistent with the roll spacing indicated by the instantaneous turbulent fields. The spectral tangential momentum flux, in particular, reaches a strong peak value at the roll wavelength. In contrast, the spectral radial momentum flux obtains its maximum at the wavelength that is usually shorter than the roll's, suggesting that the roll radial momentum transport is less efficient than the tangential because of the quasi-two-dimensionality of the roll structure. The most robust rolls are produced in a simulation with the highest inflection-point level and relatively strong radial wind shear. Based on the spectral analysis, the roll-scale contribution to the turbulent momentum flux can reach 40 % in the middle of the boundary layer.

Decrease in Ground-Run Distance of Small Airplanes by Applying Electrically-Driven Wheels

NASA Astrophysics Data System (ADS)

Kobayashi, Hiroshi; Nishizawa, Akira

A new takeoff method for small airplanes was proposed. Ground-roll performance of an airplane driven by electrically-powered wheels was experimentally and computationally studied. The experiments verified that the ground-run distance was decreased by half with a combination of the powered driven wheels and propeller without increase of energy consumption during the ground-roll. The computational analysis showed the ground-run distance of the wheel-driven aircraft was independent of the motor power when the motor capability exceeded the friction between tires and ground. Furthermore, the distance was minimized when the angle of attack was set to the value so that the wing generated negative lift.

Water-absorption rate equation of rice for brewing sake.

PubMed

Mizuma, Tomochika; Tomita, Akiko; Kitaoka, Atsushi; Kiyokawa, Yoshifumi; Wakai, Yoshinori

2007-01-01

This study was undertaken to analyze the kinetics of water absorption and to derive an equation for the rate at which water is absorbed by rice for brewing sake. We used two rice varieties: Gin-oumi, commonly used as a staple food, and Gohyakumangoku, a variety used particularly for brewing sake. The water-absorption rate equations of Gin-oumi and Gohyakumangoku were postulated based on the following equations. For Gin-oumi (water content, 11.5%), dx/dtheta=k(1-x)(n), n=1, k=(2 x 10(-9))exp(0.0604 x (t+273.15)). For Gohyakumangoku (11.5%), dx/dtheta=k(1-x)(n)(x+a), n=1, a=0.29, k=(2 x 10(-8))exp(0.0534 x (t+273.15)). Here, x, theta (min), and t ( degrees C) are the water absorbing ratio, time, and temperature, respectively. The result shows that the values of the temperature-dependence parameter k (min(-1)), as well as its curves, are different; a typical rice grain has a monotonically smooth curve, whereas that suitable for sake brewing has an S-shaped curve.

Effect of Zingiber officinale and propolis on microorganisms and endotoxins in root canals

PubMed Central

MAEKAWA, Lilian Eiko; VALERA, Marcia Carneiro; de OLIVEIRA, Luciane Dias; CARVALHO, Cláudio Antonio Talge; CAMARGO, Carlos Henrique Ribeiro; JORGE, Antonio Olavo Cardoso

2013-01-01

The purpose of this study was to evaluate the effectiveness of glycolic propolis (PRO) and ginger (GIN) extracts, calcium hydroxide (CH), chlorhexidine (CLX) gel and their combinations as ICMs (ICMs) against Candida albicans, Enterococcus faecalis, Escherichia coli and endotoxins in root canals. Material and Methods: After 28 days of contamination with microorganisms, the canals were instrumented and then divided according to the ICM: CH+saline; CLX, CH+CLX, PRO, PRO+CH; GIN; GIN+CH; saline. The antimicrobial activity and quantification of endotoxins by the chromogenic test of Limulus amebocyte lysate were evaluated after contamination and instrumentation at 14 days of ICM application and 7 days after ICM removal. Results and Conclusion: After analysis of results and application of the Kruskal-Wallis and Dunn statistical tests at 5% significance level, it was concluded that all ICMs were able to eliminate the microorganisms in the root canals and reduce their amount of endotoxins; however, CH was more effective in neutralizing endotoxins and less effective against C. albicans and E. faecalis, requiring the use of medication combinations to obtain higher success. PMID:23559108

Analysis of risk factors for infections with gastrointestinal nematodes, Eimeria spp. and lungworms in German organic sheep farms.

PubMed

Kern, Gesche; Traulsen, Imke; Kemper, Nicole; Krieter, Joachim

2015-01-01

The aim of this study was to determine the risk factors influencing the occurrence of parasitic infections in organic sheep farms in Germany. Therefore, 635 pooled faecal samples from sheep kept on 20 organic farms were collected and examined by standard parasitological analyses for gastrointestinal nematodes (GINs), Eimeria species (spp.) and liver flukes (Fasciola hepatica). Additionally, 128 double-pooled samples were analysed for lungworm larvae. In 60.5% of all samples, parasite stadiums were detected, and 38.3% of the double-pooled samples were lungworm-positive. Production period, months and year of sampling had significant effects on infections with GINs (p < 0.05). The prevalence of GIN infection was lowest in 'dairy'(40.0%) when compared with'meat'sheep (65.4%). The odds of being infected with Eimeria spp. was influenced by the month (p < 0.05). The number of ewes on a farm, the primary purpose or the grazing area showed no significant effects. Infections with lungworms occurred in tendency more often 'after' lambing period.

Structure of the eukaryotic replicative CMG helicase suggests a pumpjack motion for translocation

DOE PAGES

Yuan, Zuanning; Bai, Lin; Sun, Jingchuan; ...

2016-02-08

The CMG helicase is composed of Cdc45, Mcm2–7 and GINS. Here we report the structure of the Saccharomyces cerevisiae CMG, determined by cryo-EM at a resolution of 3.7–4.8 Å. The structure reveals that GINS and Cdc45 scaffold the N tier of the helicase while enabling motion of the AAA+ C tier. CMG exists in two alternating conformations, compact and extended, thus suggesting that the helicase moves like an inchworm. The N-terminal regions of Mcm2–7, braced by Cdc45–GINS, form a rigid platform upon which the AAA+ C domains make longitudinal motions, nodding up and down like an oil-rig pumpjack attached tomore » a stable platform. The Mcm ring is remodeled in CMG relative to the inactive Mcm2–7 double hexamer. In addition, the Mcm5 winged-helix domain is inserted into the central channel, thus blocking entry of double-stranded DNA and supporting a steric-exclusion DNA-unwinding model.« less

A Pilot Opinion Study of Lateral Control Requirements for Fighter-Type Aircraft

NASA Technical Reports Server (NTRS)

Creer, Brent Y.; Stewart, John D.; Merrick, Robert B.; Drinkwater, Fred J., III

1959-01-01

As part of a continuing NASA program of research on airplane handling qualities, a pilot opinion investigation has been made on the lateral control requirements of fighter aircraft flying in their combat speed range. The investigation was carried out using a stationary flight simulator and a moving flight simulator, and the flight simulator results were supplemented by research tests in actual flight. The flight simulator study was based on the presumption that the pilot rates the roll control of an airplane primarily on a single-degree-of-freedom basis; that is, control of angle of roll about the aircraft body axis being of first importance. From the assumption of a single degree of freedom system it follows that there are two fundamental parameters which govern the airplane roll response, namely the roll damping expressed as a time constant and roll control power in terms of roll acceleration. The simulator study resulted in a criterion in terms of these two parameters which defines satisfactory, unsatisfactory, and unacceptable roll performance from a pilot opinion standpoint. The moving simulator results were substantiated by the in-flight investigation. The derived criterion was compared with the roll performance criterion based upon wing tip helix angle and also with other roll performance concepts which currently influence the roll performance design of military fighter aircraft flying in their combat speed range.

Determination Of Slitting Criterion Parameter During The Multi Slit Rolling Process

NASA Astrophysics Data System (ADS)

Stefanik, Andrzej; Mróz, Sebastian; Szota, Piotr; Dyja, Henryk

2007-05-01

The rolling of rods with slitting of the strip calls for the use of special mathematical models that would allow for the separating of metal. A theoretical analysis of the effect of the gap of slitting rollers on the process of band slitting during the rolling of 20 mm and 16 mm-diameter ribbed rods rolled according to the two-strand technology was carried out within this study. For the numerical modeling of strip slitting the Forge3® computer program was applied. The strip slitting in the simulation is implemented by the algorithm of removing elements in which the critical value of the normalized Cockroft - Latham criterion has been exceeded. To determine the value of the criterion the inverse method was applied. Distance between a point, where crack begins, and point of contact metal with the slitting rollers was the parameter for analysis. Power and rolling torque during slit rolling were presented. Distribution and change of the stress in strand while slitting were presented.

78 FR 58995 - Foreign-Trade Zone (FTZ) 138-Columbus, Ohio; Notification of Proposed Production Activity; Rolls...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [B-83-2013] Foreign-Trade Zone (FTZ) 138--Columbus, Ohio; Notification of Proposed Production Activity; Rolls Royce Energy Systems, Inc. (Industrial Gas Turbines, Power Generation Turbines, and Generator Sets); Mount Vernon, Ohio The Columbus Regional Airport Authority, grantee of FTZ 138,...

Flight evaluation of the transonic stability and control characteristics of an airplane incorporating a supercritical wing

NASA Technical Reports Server (NTRS)

Matheny, N. W.; Gatlin, D. H.

1978-01-01

A TF-8A airplane was equipped with a transport type supercritical wing and fuselage fairings to evaluate predicted performance improvements for cruise at transonic speeds. A comparison of aerodynamic derivatives extracted from flight and wind tunnel data showed that static longitudinal stability, effective dihedral, and aileron effectiveness, were higher than predicted. The static directional stability derivative was slower than predicted. The airplane's handling qualities were acceptable with the stability augmentation system on. The unaugmented airplane exhibited some adverse lateral directional characteristics that involved low Dutch roll damping and low roll control power at high angles of attack and roll control power that was greater than satisfactory for transport aircraft at cruise conditions. Longitudinally, the aircraft exhibited a mild pitchup tendency. Leading edge vortex generators delayed the onset of flow separation, moving the pitchup point to a higher lift coefficient and reducing its severity.

Combined process "helical rolling-pressing" and its effect on the microstructure of ferrous and non-ferrous materials

NASA Astrophysics Data System (ADS)

Naizabekov, Abdrakhman; Lezhnev, Sergey; Arbuz, Alexandr; Panin, Evgeniy

2018-02-01

Ultrafine-grained materials are one of the most promising structural and functional materials. However, the known methods of obtaining them are not enough powerful and technologically advanced for profitable industrial applications. Development of the combined process "helical rolling-pressing" is an attempt to bring technology to produce ultrafine-grained materials to the industry. The combination of intense processing of the surface by helical rolling and the entire cross section of workpiece in equal channel angular matrix, with intense deformation by torsion between rolls and matrix will increase the degree of deformation per pass and allows to mutually compensate disadvantages of these methods in the case of their separate use. This paper describes the development of a laboratory stand and study of influence of combined process "helical rolling-pressing"on the microstructure of tool steel, technical copper and high alloy stainless high-temperature steel.

Effect of fall-grazed sericea lespedeza (Lespedeza cuneata) on gastrointestinal nematode infections of growing goats.

PubMed

Mechineni, A; Kommuru, D S; Gujja, S; Mosjidis, J A; Miller, J E; Burke, J M; Ramsay, A; Mueller-Harvey, I; Kannan, G; Lee, J H; Kouakou, B; Terrill, T H

2014-08-29

High prevalence of anthelmintic-resistant gastrointestinal nematodes (GIN) in goats has increased pressure to find effective, alternative non-synthetic control methods, one of which is adding forage of the high condensed tannin (CT) legume sericea lespedeza (SL; Lespedeza cuneata) to the animal's diet. Previous work has demonstrated good efficacy of dried SL (hay, pellets) against small ruminant GIN, but information is lacking on consumption of fresh SL, particularly during the late summer-autumn period in the southern USA when perennial warm-season grass pastures are often low in quality. A study was designed to determine the effects of autumn (September-November) consumption of fresh SL forage, grass pasture (predominantly bermudagrass, BG; Cynodon dactylon), or a combination of SL+BG forage by young goats [intact male Spanish kids, 9 months old (20.7 ± 1.1 kg), n = 10/treatment group] on their GIN infection status. Three forage paddocks (0.40 ha) were set up at the Fort Valley State University Agricultural Research Station (Fort Valley, GA) for an 8-week trial. The goats in each paddock were supplemented with a commercial feed pellet at 0.45 kg/head/d for the first 4 weeks of the trial, and 0.27 kg/head/d for the final 4 weeks. Forage samples taken at the start of the trial were analyzed for crude protein (CP), neutral detergent fiber (NDF), and acid detergent fiber (ADF) content, and a separate set of SL samples was analyzed for CT in leaves, stems, and whole plant using the benzyl mercaptan thiolysis method. Animal weights were taken at the start and end of the trial, and fecal and blood samples were collected weekly for determination of fecal egg counts (FEC) and packed cell volume (PCV), respectively. Adult GIN was recovered from the abomasum and small intestines of all goats at the end of the experiment for counting and speciation. The CP levels were highest for SL forage, intermediate for SL+BG, and lowest for BG forage samples, while NDF and ADF values were the opposite, with highest levels in BG and lowest in SL forage samples. Sericea lespedeza leaves had more CT than stems (16.0 g vs. 3.3g/100g dry weight), a slightly higher percentage of PDs (98% vs. 94%, respectively) and polymers of larger mean degrees of polymerization (42 vs. 18, respectively). There were no differences in average daily gain or blood PCV between the treatment groups, but SL goats had lower FEC (P < 0.05) than the BG or SL+BG forage goats throughout most of the trial. The SL+BG goats had lower FEC than the BG forage animals by the end of the trial (week 8, P < 0.05). The SL goats had lower numbers (P < 0.05) of male Haemonchus contortus and tended to have fewer female (P < 0.10) and total (P < 0.07) H. contortus compared with the BG goats. The predominant GIN in all the goats was Trichostrongylus colubriformis (73% of total GIN). As a low-input forage with activity against pathogenic GIN (H. contortus), SL has a potential to reduce producers' dependence upon synthetic anthelmintics and also to fill the autumn 'window' in good-quality fresh forages for goat grazing in the southern USA. Copyright © 2014 Elsevier B.V. All rights reserved.

Deployable aerospace PV array based on amorphous silicon alloys

NASA Technical Reports Server (NTRS)

Hanak, Joseph J.; Walter, Lee; Dobias, David; Flaisher, Harvey

1989-01-01

The development of the first commercial, ultralight, flexible, deployable, PV array for aerospace applications is discussed. It is based on thin-film, amorphous silicon alloy, multijunction, solar cells deposited on a thin metal or polymer by a proprietary, roll-to-roll process. The array generates over 200 W at AM0 and is made of 20 giant cells, each 54 cm x 29 cm (1566 sq cm in area). Each cell is protected with bypass diodes. Fully encapsulated array blanket and the deployment mechanism weigh about 800 and 500 g, respectively. These data yield power per area ratio of over 60 W/sq m specific power of over 250 W/kg (4 kg/kW) for the blanket and 154 W/kg (6.5 kg/kW) for the power system. When stowed, the array is rolled up to a diameter of 7 cm and a length of 1.11 m. It is deployed quickly to its full area of 2.92 m x 1.11 m, for instant power. Potential applications include power for lightweight space vehicles, high altitude balloons, remotely piloted and tethered vehicles. These developments signal the dawning of a new age of lightweight, deployable, low-cost space arrays in the range from tens to tens of thousands of watts for near-term applications and the feasibility of multi-100 kW to MW arrays for future needs.

Deployable aerospace PV array based on amorphous silicon alloys

NASA Astrophysics Data System (ADS)

Hanak, Joseph J.; Walter, Lee; Dobias, David; Flaisher, Harvey

1989-04-01

The development of the first commercial, ultralight, flexible, deployable, PV array for aerospace applications is discussed. It is based on thin-film, amorphous silicon alloy, multijunction, solar cells deposited on a thin metal or polymer by a proprietary, roll-to-roll process. The array generates over 200 W at AM0 and is made of 20 giant cells, each 54 cm x 29 cm (1566 sq cm in area). Each cell is protected with bypass diodes. Fully encapsulated array blanket and the deployment mechanism weigh about 800 and 500 g, respectively. These data yield power per area ratio of over 60 W/sq m specific power of over 250 W/kg (4 kg/kW) for the blanket and 154 W/kg (6.5 kg/kW) for the power system. When stowed, the array is rolled up to a diameter of 7 cm and a length of 1.11 m. It is deployed quickly to its full area of 2.92 m x 1.11 m, for instant power. Potential applications include power for lightweight space vehicles, high altitude balloons, remotely piloted and tethered vehicles. These developments signal the dawning of a new age of lightweight, deployable, low-cost space arrays in the range from tens to tens of thousands of watts for near-term applications and the feasibility of multi-100 kW to MW arrays for future needs.

Impact of Probiotic SYNBIO(®) Administered by Vaginal Suppositories in Promoting Vaginal Health of Apparently Healthy Women.

PubMed

Verdenelli, Maria Cristina; Cecchini, Cinzia; Coman, Maria Magdalena; Silvi, Stefania; Orpianesi, Carla; Coata, Giuliana; Cresci, Alberto; Di Renzo, Gian Carlo

2016-10-01

The purpose of this study was to investigate whether vaginal administration of probiotic Lactobacillus results in their colonization and persistence in the vagina and whether it promotes normalization and maintenance of pH and Nugent score. A single-arm, open-label controlled towards the baseline (pre-post) study including 35 apparently healthy women was conducted. Each woman was examined three times during the study. Women were instructed to receive daily for 7 days, the probiotic suppositories SYNBIO(®) gin (Lactobacillus rhamnosus IMC 501(®) and Lactobacillus paracasei IMC 502(®)). Vaginal swabs were collected during visit 1, 2, and 3 to determine the total lactobacilli count, the presence of the two administered bacteria, the measure of the pH, and the estimation of Nugent score. Evaluation of treatment tolerability was based on analysis of the type and occurrence of adverse events. The probiotic vaginal suppository was well tolerated and no side effects were reported. Intermediate Nugent score was registered in 40 % of women at visit 1 and these intermediate scores reverted to normal at day 7 (end of treatment) in 20 % of subjects. Administration of SYNBIO(®) gin contributed to a significant increase in the lactobacilli level at visit 2. Molecular typing revealed the presence of the two strains originating from SYNBIO(®) gin in 100 % of women at visit 2 and 34 % at visit 3. No significant changes were registered for pH between visits. The SYNBIO(®) gin product is safe for daily use in healthy women and it could be useful to restore and maintain a normal vaginal microbiota.

Haemonchotolerance in West African Dwarf goats: contribution to sustainable, anthelmintics-free helminth control in traditionally managed Nigerian dwarf goats.

PubMed

Chiejina, Samuel N; Behnke, Jerzy M; Fakae, Barineme B

2015-01-01

West African Dwarf (WAD) goats are extremely important in the rural village economy of West Africa, but still little is known about their biology, ecology and capacity to cope with gastrointestinal nematode (GIN) infections. Here, we summarise the history of this breed and explain its economic importance in rural West Africa. We review recent work showing that Nigerian WAD goats are highly trypanotolerant and resist infections with Haemonchus contortus more effectively than other breeds of domestic goat (haemonchotolerance). We believe that haemonchotolerance is largely responsible for the generally low level GIN infections and absence of clinical haemonchosis in WADs under field conditions, and has contributed to the relatively successful and sustainable, anthelmintics-free, small-scale system of goat husbandry in Nigeria's humid zone, and is immunologically based and genetically controlled. If haemonchotolerance can be shown to be genetically controlled, it should be possible to exploit the underlying genes to improve GIN resistance among productive fibre and milk producing breeds of goats, most of which are highly susceptible to nematode infections. Genetic resistance to GIN and trypanosome infections would obviate the need for expensive chemotherapy, mostly unaffordable to small-holder farmers in Africa, and a significant cost of goat husbandry in more developed countries. Either introgression of resistance alleles into susceptible breeds by conventional breeding, or transgenesis could be used to develop novel parasite-resistant, but highly productive breeds, or to improve the resistance of existing breeds, benefitting the local West African rural economy as well as global caprine livestock agriculture. © S.N. Chiejina et al., published by EDP Sciences, 2015.

Diachronous high-latitude North Atlantic temperature evolution across the last interglaciation

NASA Astrophysics Data System (ADS)

Carlson, A. E.; He, F.; Clark, P. U.

2017-12-01

A direct response of Northern Hemisphere temperatures to last interglacial boreal summer insolation forcing and atmospheric carbon dioxide concentration would predict early interglacial warmth followed by a gradual cooling trend across the last interglaciation (128-116 ka). In contrast, some Labrador and Greenland-Iceland-Norwegian (GIN) sea surface temperature (SST) records show relatively cool early last-interglacial SSTs followed by warming in the latter part of the interglaciation. This phenomenon has sometimes been attributed to meltwater forcing from continued retreat of the Greenland ice sheet through the last interglaciation that suppressed North Atlantic overturning circulation, in agreement with proxy records. Here we investigate this observation with the first fully-coupled transient general circulation model simulation of the last interglacial period using CCSM3. Termination II deglacial meltwater forcing is stopped at 129 ka and the subsequent simulation is forced by changing orbital parameters and atmospheric greenhouse gases. We find that Labrador and GIN SSTs remain relatively cool followed by warming to peak interglacial temperatures after 124 ka. We show that this delayed warming is due to reduced convection in the GIN sea, despite a cessation of meltwater forcing at 129 ka, with convection onset at 124 ka and attendant sea-ice retreat in response to orbital- and greenhouse gas-forcing alone. Our results demonstrate that delayed high-latitude North Atlantic SST warming during the last interglaciation does not necessitate meltwater forcing from the Greenland ice sheet, rectifying the apparent disconnect between a small meltwater forcing (<2.5 m of sea-level rise over 8 ka, or <0.004 Sverdrups into the Labrador and GIN seas) and a relatively large North Atlantic overturning response.

29 CFR 1918.86 - Roll-on roll-off (Ro-Ro) operations (see also § 1918.2, Ro-Ro operations, and § 1918.25).

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Ro-Ro operations, and § 1918.25). 9 [Reserved] (a) Traffic control system. An organized system of... simultaneous use of the ramp by vehicles and pedestrians. (d) Ramp maintenance. Ramps shall be properly...: (1) Sufficient power to ascend ramp inclines safely; and (2) Sufficient braking capacity to descend...

29 CFR 1918.86 - Roll-on roll-off (Ro-Ro) operations (see also § 1918.2, Ro-Ro operations, and § 1918.25).

Code of Federal Regulations, 2011 CFR

2011-07-01

... simultaneous use of the ramp by vehicles and pedestrians. (d) Ramp maintenance. Ramps shall be properly... ramp inclines safely. (j) Safe speeds. Power driven vehicles used in Ro-Ro operations shall be operated at speeds that are safe for prevailing conditions. (k) Ventilation. Internal combustion engine-driven...

Note on the stability of viscous roll waves

NASA Astrophysics Data System (ADS)

Barker, Blake; Johnson, Mathew A.; Noble, Pascal; Rodrigues, Luis Miguel; Zumbrun, Kevin

2017-02-01

In this note, we announce a complete classification of the stability of periodic roll-wave solutions of the viscous shallow water equations, from their onset at Froude number F ≈ 2 up to the infinite Froude limit. For intermediate Froude numbers, we obtain numerically a particularly simple power-law relation between F and the boundaries of the region of stable periods, which appears potentially useful in hydraulic engineering applications. In the asymptotic regime F → 2 (onset), we provide an analytic expression of the stability boundaries, whereas in the limit F → ∞, we show that roll waves are always unstable.

Roll type conducting polymer legs for rigid-flexible thermoelectric generator

NASA Astrophysics Data System (ADS)

Park, Teahoon; Lim, Hanwhuy; Hwang, Jong Un; Na, Jongbeom; Lee, Hyunki; Kim, Eunkyoung

2017-07-01

A roll-type conducting polymer film was explored as a flexible organic p-type thermoelectric leg using poly(3,4-ethylenedioxythiophene) (PEDOT) doped with tosylate. The PEDOT films were prepared through solution casting polymerization and rolled up for a roll-type leg. Due to the high flexibility, the roll-type PEDOT leg enabled easy contact to both top and bottom electrodes. Simulation on the dynamic heat transfer and convective cooling for a vertically roosted rod- and roll-type PEDOT leg showed that the temperature difference (ΔT) between the hot and cold sides of the leg was much higher in the roll than that of the rod. The PEDOT legs were integrated with n-type Bi2Te3 blocks, to give a 36-couple rigid-flexible thermoelectric generator (RF-TEG). The maximum output voltage from the 36-couple RF-TEG under a ΔT of 7.9 K was determined as 36.7 mV along with a high output power of 115 nW. A wearable RF-TEG was prepared upon the combination of the 36-couple RF-TEG with an arm warmer, to afford an output voltage of 10.6 mV, which was generated constantly and steadily from human wrist heat.

Morbidity Parameters Associated with Gastrointestinal Tract Nematodes in Sheep in Dabat District, Northwest Ethiopia

PubMed Central

Getnet, Kalkidan; Chanie, Mersha; Derso, Samuel; Fentahun, Shumye

2018-01-01

Gastrointestinal nematode (GIN) infections of sheep and their interaction with selected morbidity parameters were studied in smallholder farms. 120 faecal samples were collected and examined using faecal flotation to determine nematode infection in sheep. Thus, the study demonstrated overall prevalence of 57.5% GIN infections, while the mean faecal egg count (FEC) was 517.5 EPG. The severity of GIN infection was determined based on EPG as a mild infection (EPG <500), 55.1%, moderate infection (EPG = 500–1500), 30.4%, and heavy infection (EPG >1500), 14.6%. Five genera of nematodes were identified using coproculture: Haemonchus (33.3%), Trichostrongylus (26.7%), Bunostomum (20%), Oesophagostomum (13.3%), and Cooperia (6.7%). A significant difference was observed in the mean FEC among the FC (P < 0.001), FAMACHA© score (P < 0.01), and the BCS of the animals (P < 0.001). FEC was positively correlated with the FAMACHA© score (FS), while FC and BCS were negatively correlated. Thus, FAMACHA© chart can suggest well the severity of nematode infections and can serve as a suitable on-farm tool to identify nematode-infected sheep and gives a guide to identify sheep that need to be treated with an anthelmintic. PMID:29670911

Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system

PubMed Central

Park, Janghoon; Kang, Hyi Jae; Shin, Kee-Hyun; Kang, Hyunkyoo

2016-01-01

We present fast sintering for silver (Ag) nanoparticle (NP) and flake layers printed using roll-to-roll (R2R) gravure printing. An infrared (IR) sintering module was applied to an R2R system to shorten the sintering duration of an R2R gravure-printed Ag layer. IR sintering of the conductive layer was improved by optimising the process condition. After printing of the Ag NP and Ag flake layers, additional IR sintering was performed in the R2R system. The lowest sheet resistance obtained in the Ag NP layer was 0.294 Ω/□, the distance between the substrate and lamp was 50-mm long, the IR lamp power was 500 W, and the sintering time was 5.4 s. The fastest sintering of 0.34 Ω/□ was achieved with 50-mm distance, 1,000-W IR lamp power, and 1.08-s sintering time. In the Ag flake layer, the lowest sheet resistance obtained was 0.288 Ω/□ with a 20-mm distance, 1,000-W IR lamp power, and 10.8-s sintering time. Meanwhile, the fastest sintering was obtained with a 3.83 Ω/□ sheet resistance, 20-mm distance, 1000-W IR lamp, and 1.08-s sintering time. Thus, the IR sintering module can easily be employed in an R2R system to obtain excellent layer sheet resistance. PMID:27713469

Low-temperature roll-to-roll coating procedure of dye-sensitized solar cell photoelectrodes on flexible polymer-based substrates

NASA Astrophysics Data System (ADS)

Tinguely, Jean-Claude; Solarska, Renata; Braun, Artur; Graule, Thomas

2011-04-01

A new approach for the large-scale production of flexible photoelectrodes for dye-sensitized solar cells (DSSCs) is presented by roll-to-roll coating of a titanium dioxide nanodispersion containing the block copolymer 'Pluronic®' (PEOx-PPOy-PEOx, PEO: poly(ethylene oxide), PPO: poly(propylene oxide)). Functional DSSCs were assembled and the different coating procedures compared with respect to their solar power conversion efficiency. It is shown that the binder 'Pluronic' can be removed at processing temperatures as low as 140 °C, thus aiding achievement of sufficient adhesion to the ITO-PET support, higher porosity of the TiO2 layer and decreased crack appearance. Further optimization of this method is particularly promising when combined with other known low-temperature methods.

Boronline, a new generation of boron meter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pirat, P.

2011-07-01

Rolls-Royce is a global business providing integrated power systems for use on land, at sea and in the air. The Group has a balanced business portfolio with leading market positions - civil aerospace, defence aerospace, marine and energy Rolls-Royce understands the challenges of design, procurement, manufacture, operation and in-service support of nuclear reactor plants, with over 50 years of experience through the Royal Navy submarine programme. Rolls-Royce can therefore offer full product life-cycle management for new civil nuclear installations, as well as support to existing installations, including plant lifetime extensions. Rolls-Royce produced for 40 years, Instrumentation and Control (I andmore » C) systems of and associated services for nuclear reactors in Europe, including 58 French reactors and others situated in the United States and in others countries, such as China. Rolls-Royce equipped in this domain 200 nuclear reactors in 20 countries. Among all of its nuclear systems, Rolls Royce is presenting to the conference its new generation of on-line boron measurement system, so called Boronline. (authors)« less

The Power of Doing: A Learning Exercise That Brings the Central Limit Theorem to Life

ERIC Educational Resources Information Center

Price, Barbara A.; Zhang, Xiaolong

2007-01-01

This article demonstrates an active learning technique for teaching the Central Limit Theorem (CLT) in an introductory undergraduate business statistics class. Groups of students carry out one of two experiments in the lab, tossing a die in sets of 5 rolls or tossing a die in sets of 10 rolls. They are asked to calculate the sample average of each…

Two New R&D 100 Awards Uphold NREL Winning Streak - Continuum Magazine |

Science.gov Websites

-effective and meet the demand for power. Solution: NREL, in partnership with Solar Junction, a manufacturer escalating power costs, brownouts, and rolling blackouts. Solution: NREL and its partners, AILR Research, Inc

Near-surface coherent structures explored by large eddy simulation of entire tropical cyclones.

PubMed

Ito, Junshi; Oizumi, Tsutao; Niino, Hiroshi

2017-06-19

Taking advantage of the huge computational power of a massive parallel supercomputer (K-supercomputer), this study conducts large eddy simulations of entire tropical cyclones by employing a numerical weather prediction model, and explores near-surface coherent structures. The maximum of the near-surface wind changes little from that simulated based on coarse-resolution runs. Three kinds of coherent structures appeared inside the boundary layer. The first is a Type-A roll, which is caused by an inflection-point instability of the radial flow and prevails outside the radius of maximum wind. The second is a Type-B roll that also appears to be caused by an inflection-point instability but of both radial and tangential winds. Its roll axis is almost orthogonal to the Type-A roll. The third is a Type-C roll, which occurs inside the radius of maximum wind and only near the surface. It transports horizontal momentum in an up-gradient sense and causes the largest gusts.

Roll-to-Roll Nanoforming of Metals Using Laser-Induced Superplasticity.

PubMed

Goswami, Debkalpa; Munera, Juan C; Pal, Aniket; Sadri, Behnam; Scarpetti, Caio Lui P G; Martinez, Ramses V

2018-05-24

This Letter describes a low-cost, scalable nanomanufacturing process that enables the continuous forming of thin metallic layers with nanoscale accuracy using roll-to-roll, laser-induced superplasticity (R2RLIS). R2RLIS uses a laser shock to induce the ultrahigh-strain-rate deformation of metallic films at room temperature into low-cost polymeric nanomolds, independently of the original grain size of the metal. This simple and inexpensive nanoforming method does not require access to cleanrooms and associated facilities, and can be easily implemented on conventional CO 2 lasers, enabling laser systems commonly used for rapid prototyping or industrial cutting and engraving to fabricate uniform and three-dimensional crystalline metallic nanostructures over large areas. Tuning the laser power during the R2RLIS process enables the control of the aspect ratio and the mechanical and optical properties of the fabricated nanostructures. This roll-to-roll technique successfully fabricates mechanically strengthened gold plasmonic nanostructures with aspect ratios as high as 5 that exhibit high oxidation resistance and strong optical field enhancements. The CO 2 laser used in R2RLIS can also integrate the fabricated nanostructures on transparent flexible substrates with robust interfacial contact. The ability to fabricate ultrasmooth metallic nanostructures using roll-to-roll manufacturing enables the large scale production, at a relatively low-cost, of flexible plasmonic devices toward emerging applications.

Mathematical Model of Solidification During Electroslag Casting of Pilger Roll

NASA Astrophysics Data System (ADS)

Liu, Fubin; Li, Huabing; Jiang, Zhouhua; Dong, Yanwu; Chen, Xu; Geng, Xin; Zang, Ximin

A mathematical model for describing the interaction of multiple physical fields in slag bath and solidification process in ingot during pilger roll casting with variable cross-section which is produced by the electroslag casting (ESC) process was developed. The commercial software ANSYS was applied to calculate the electromagnetic field, magnetic driven fluid flow, buoyancy-driven flow and heat transfer. The transportation phenomenon in slag bath and solidification characteristic of ingots are analyzed for variable cross-section with variable input power under the conditions of 9Cr3NiMo steel and 70%CaF2 - 30%Al2O3 slag system. The calculated results show that characteristic of current density distribution, velocity patterns and temperature profiles in the slag bath and metal pool profiles in ingot have distinct difference at variable cross-sections due to difference of input power and cooling condition. The pool shape and the local solidification time (LST) during Pilger roll ESC process are analyzed.

Study to eliminate ground resonance using active controls

NASA Technical Reports Server (NTRS)

Straub, F. K.

1984-01-01

The effectiveness of active control blade feathering in increasing rotor body damping and the possibility to eliminate ground resonance instabilities were investigated. An analytical model representing rotor flapping and lead-lag degrees of freedom and body pitch, roll, longitudinal and lateral motion is developed. Active control blade feathering is implemented as state variable feedback through a conventional swashplate. The influence of various feedback states, feedback gain, and weighting between the cyclic controls is studied through stability and response analyses. It is shown that blade cyclic inplane motion, roll rate and roll acceleration feedback can add considerable damping to the system and eliminate ground resonance instabilities, which the feedback phase is also a powerful parameter, if chosen properly, it maximizes augmentation of the inherent regressing lag mode damping. It is shown that rotor configuration parameters, like blade root hinge offset, flapping stiffness, and precone considerably influence the control effectiveness. It is found that active control is particularly powerful for hingeless and bearingless rotor systems.

Material Processing with High Power CO2-Lasers

NASA Astrophysics Data System (ADS)

Bakowsky, Lothar

1986-10-01

After a period of research and development lasertechnique now is regarded as an important instrument for flexible, economic and fully automatic manufacturing. Especially cutting of flat metal sheets with high power C02-lasers and CNC controlled two or three axes handling systems is a wide spread. application. Three dimensional laser cutting, laser-welding and -heat treatment are just at the be ginning of industrial use in production lines. The main. advantages of laser technology. are - high. accuracy - high, processing velocity - law thermal distortion. - no tool abrasion. The market for laser material processing systems had 1985 a volume of 300 Mio S with growth rates between, 20 % and 30 %. The topic of this lecture are hiTrh. power CO2-lasers. Besides this systems two others are used as machining tools, Nd-YAG- and Eximer lasers. All applications of high. power CO2-lasers to industrial material processing show that high processing velocity and quality are only guaranteed in case of a stable intensity. profile on the workpiece. This is only achieved by laser systems without any power and mode fluctuations and by handling systems of high accuracy. Two applications in the automotive industry are described, below as examples for laser cutting and laser welding of special cylindrical motor parts.

A Note on Expansiveness and Hyperbolicity for Generic Geodesic Flows

NASA Astrophysics Data System (ADS)

Bessa, Mário

2018-06-01

In this short note we contribute to the generic dynamics of geodesic flows associated to metrics on compact Riemannian manifolds of dimension ≥ 2. We prove that there exists a C 2-residual subset R of metrics on a given compact Riemannian manifold such that if g\\in R, then its associated geodesic flow φ tg is expansive if and only if the closure of the set of periodic orbits of φtg is a uniformly hyperbolic set. For surfaces, we obtain a stronger statement: there exists a C 2-residual R such that if g\\in R, then its associated geodesic flow φtg is expansive if and only if φtg is an Anosov flow.

Fusion information entropy method of rolling bearing fault diagnosis based on n-dimensional characteristic parameter distance

NASA Astrophysics Data System (ADS)

Ai, Yan-Ting; Guan, Jiao-Yue; Fei, Cheng-Wei; Tian, Jing; Zhang, Feng-Ling

2017-05-01

To monitor rolling bearing operating status with casings in real time efficiently and accurately, a fusion method based on n-dimensional characteristic parameters distance (n-DCPD) was proposed for rolling bearing fault diagnosis with two types of signals including vibration signal and acoustic emission signals. The n-DCPD was investigated based on four information entropies (singular spectrum entropy in time domain, power spectrum entropy in frequency domain, wavelet space characteristic spectrum entropy and wavelet energy spectrum entropy in time-frequency domain) and the basic thought of fusion information entropy fault diagnosis method with n-DCPD was given. Through rotor simulation test rig, the vibration and acoustic emission signals of six rolling bearing faults (ball fault, inner race fault, outer race fault, inner-ball faults, inner-outer faults and normal) are collected under different operation conditions with the emphasis on the rotation speed from 800 rpm to 2000 rpm. In the light of the proposed fusion information entropy method with n-DCPD, the diagnosis of rolling bearing faults was completed. The fault diagnosis results show that the fusion entropy method holds high precision in the recognition of rolling bearing faults. The efforts of this study provide a novel and useful methodology for the fault diagnosis of an aeroengine rolling bearing.

Mathematical modeling of a process the rolling delivery

NASA Astrophysics Data System (ADS)

Stepanov, Mikhail A.; Korolev, Andrey A.

2018-03-01

An adduced analysis of the scientific researches in a domain of the rolling equipments, also research of properties the working material. A one of perspective direction of scientific research this is mathematical modeling. That is broadly used in many scientific disciplines and especially at the technical, applied sciences. With the aid of mathematical modeling it can be study of physical properties of the researching objects and systems. A research of the rolling delivery and transporting devices realized with the aid of a construction of mathematical model of appropriate process. To be described the basic principles and conditions of a construction of mathematical models of the real objects. For example to be consider a construction of mathematical model the rolling delivery device. For a construction that is model used system of the equations, which consist of: Lagrange’s equation of a motion, describing of the law conservation of energy of a mechanical system, and the Navier - Stokes equations, which characterize of the flow of a continuous non-compressed fluid. A construction of mathematical model the rolling deliver to let determined of a total energy of device, and therefore to got the dependence upon the power of drive to a gap between of rolls. A corroborate the hypothesis about laminar the flow of a material into the rolling gap of deliver.

The Influence of Hot-Rolled Temperature on Plasma Nitriding Behavior of Iron-Based Alloys

NASA Astrophysics Data System (ADS)

El-Hossary, F. M.; Khalil, S. M.; Lotfy, Kh.; Kassem, M. A.

2009-07-01

Experiments were performed with an aim of studying the effect of hot-rolled temperature (600 and 900°C) on radio frequency (rf) plasma nitriding of Fe93Ni4Zr3 alloy. Nitriding was carried out for 10 min in a nitrogen atmosphere at a base pressure of 10-2 mbarr. Different continuous plasma processing powers of 300-550 W in steps 50 W or less were applied. Nitrided hot-rolled specimens were characterized by optical microscopy (OM), X-ray diffraction (XRD) and microhardness measurements. The results reveal that the surface of hot-rolled rf plasma nitrided specimens at 600°C is characterized with a fine microstructure as a result of the high nitrogen solubility and diffusivity. Moreover, the hot-rolled treated samples at 600°C exhibit higher microhardness value than the associated values of hot-rolled treated samples at 900°C. The enhancement of microhardness is due to precipitation and predominance of new phases ( γ and ɛ phases). Mainly, this conclusion has been attributed to the high defect densities and small grain sizes of the samples hot-rolled at 600°C. Generally, the refinement of grain size plays a dramatic role in improvement of mechanical properties of tested samples.

Roll-to-roll production of spray coated N-doped carbon nanotube electrodes for supercapacitors

NASA Astrophysics Data System (ADS)

Karakaya, Mehmet; Zhu, Jingyi; Raghavendra, Achyut J.; Podila, Ramakrishna; Parler, Samuel G.; Kaplan, James P.; Rao, Apparao M.

2014-12-01

Although carbon nanomaterials are being increasingly used in energy storage, there has been a lack of inexpensive, continuous, and scalable synthesis methods. Here, we present a scalable roll-to-roll (R2R) spray coating process for synthesizing randomly oriented multi-walled carbon nanotubes electrodes on Al foils. The coin and jellyroll type supercapacitors comprised such electrodes yield high power densities (˜700 mW/cm3) and energy densities (1 mW h/cm3) on par with Li-ion thin film batteries. These devices exhibit excellent cycle stability with no loss in performance over more than a thousand cycles. Our cost analysis shows that the R2R spray coating process can produce supercapacitors with 10 times the energy density of conventional activated carbon devices at ˜17% lower cost.

Decadal-timescale changes of the Atlantic overturning circulation and climate in a coupled climate model with a hybrid-coordinate ocean component

NASA Astrophysics Data System (ADS)

Persechino, A.; Marsh, R.; Sinha, B.; Megann, A. P.; Blaker, A. T.; New, A. L.

2012-08-01

A wide range of statistical tools is used to investigate the decadal variability of the Atlantic Meridional Overturning Circulation (AMOC) and associated key variables in a climate model (CHIME, Coupled Hadley-Isopycnic Model Experiment), which features a novel ocean component. CHIME is as similar as possible to the 3rd Hadley Centre Coupled Model (HadCM3) with the important exception that its ocean component is based on a hybrid vertical coordinate. Power spectral analysis reveals enhanced AMOC variability for periods in the range 15-30 years. Strong AMOC conditions are associated with: (1) a Sea Surface Temperature (SST) anomaly pattern reminiscent of the Atlantic Multi-decadal Oscillation (AMO) response, but associated with variations in a northern tropical-subtropical gradient; (2) a Surface Air Temperature anomaly pattern closely linked to SST; (3) a positive North Atlantic Oscillation (NAO)-like pattern; (4) a northward shift of the Intertropical Convergence Zone. The primary mode of AMOC variability is associated with decadal changes in the Labrador Sea and the Greenland Iceland Norwegian (GIN) Seas, in both cases linked to the tropical activity about 15 years earlier. These decadal changes are controlled by the low-frequency NAO that may be associated with a rapid atmospheric teleconnection from the tropics to the extratropics. Poleward advection of salinity anomalies in the mixed layer also leads to AMOC changes that are linked to processes in the Labrador Sea. A secondary mode of AMOC variability is associated with interannual changes in the Labrador and GIN Seas, through the impact of the NAO on local surface density.

International Space Station Alpha's bearing, motor, and roll ring module developmental testing and results

NASA Technical Reports Server (NTRS)

Obrien, David L.

1994-01-01

This paper presents the design and developmental testing associated with the bearing, motor, and roll ring module (BMRRM) used for the beta rotation axis on International Space Station Alpha (ISSA). The BMRRM with its controllers located in the electronic control unit (ECU), provides for the solar array pointing and tracking functions as well as power and signal transfer across a rotating interface.

On Application of the Ostwald-de Waele Model to Description of Non-Newtonian Fluid Flow in the Nip of Counter-Rotating Rolls

NASA Astrophysics Data System (ADS)

Shapovalov, V. M.

2018-05-01

The accuracy of the Ostwald-de Waele model in solving the problem of roll flow has been assessed by comparing with the "reference" solution for an Ellis fluid. As a result of the analysis, it has been shown that the model based on a power-law equation leads to substantial distortions of the flow pattern.

Pv-Thermal Solar Power Assembly

DOEpatents

Ansley, Jeffrey H.; Botkin, Jonathan D.; Dinwoodie, Thomas L.

2001-10-02

A flexible solar power assembly includes a flexible photovoltaic device attached to a flexible thermal solar collector. The solar power assembly can be rolled up for transport and then unrolled for installation on a surface, such as the roof or side wall of a building or other structure, by use of adhesive and/or other types of fasteners.

Chemical Safety Alert: Chemical Accidents from Electric Power Outages

EPA Pesticide Factsheets

Incident data from the National Response Center (NRC) shows that during 2000 there were about 240 chemical releases reported due to an electric power interruption, as well as resumption/restart; only a few were related to planned rolling blackouts.

The scale invariant power spectrum of the primordial curvature perturbations from the coupled scalar tachyon bounce cosmos

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Changhong; Cheung, Yeuk-Kwan E., E-mail: chellifegood@gmail.com, E-mail: cheung@nju.edu.cn

2014-07-01

We investigate the spectrum of cosmological perturbations in a bounce cosmos modeled by a scalar field coupled to the string tachyon field (CSTB cosmos). By explicit computation of its primordial spectral index we show the power spectrum of curvature perturbations, generated during the tachyon matter dominated contraction phase, to be nearly scale invariant. We propose a unified parameter space for a systematic study of inflationary and bounce cosmologies. The CSTB cosmos is dual-in Wands's sense-to slow-roll inflation as can be visualized with the aid of this parameter space. Guaranteed by the dynamical attractor behavior of the CSTB Cosmos, the scalemore » invariance of its power spectrum is free of the fine-tuning problem, in contrast to the slow-roll inflation model.« less

A Smart Collaborative Routing Protocol for Reliable Data Diffusion in IoT Scenarios.

PubMed

Ai, Zheng-Yang; Zhou, Yu-Tong; Song, Fei

2018-06-13

It is knotty for current routing protocols to meet the needs of reliable data diffusion during the Internet of Things (IoT) deployments. Due to the random placement, limited resources and unattended features of existing sensor nodes, the wireless transmissions are easily exposed to unauthorized users, which becomes a vulnerable area for various malicious attacks, such as wormhole and Sybil attacks. However, the scheme based on geographic location is a suitable candidate to defend against them. This paper is inspired to propose a smart collaborative routing protocol, Geographic energy aware routing and Inspecting Node (GIN), for guaranteeing the reliability of data exchanging. The proposed protocol integrates the directed diffusion routing, Greedy Perimeter Stateless Routing (GPSR), and the inspecting node mechanism. We first discuss current wireless routing protocols from three diverse perspectives (improving transmission rate, shortening transmission range and reducing transmission consumption). Then, the details of GIN, including the model establishment and implementation processes, are presented by means of the theoretical analysis. Through leveraging the game theory, the inspecting node is elected to monitor the network behaviors. Thirdly, we evaluate the network performances, in terms of transmission delay, packet loss ratio, and throughput, between GIN and three traditional schemes (i.e., Flooding, GPSR, and GEAR). The simulation results illustrate that the proposed protocol is able to outperform the others.

A novel non prophage(-like) gene-intervening element within gerE that is reconstituted during sporulation in Bacillus cereus ATCC10987.

PubMed

Abe, Kimihiro; Shimizu, Shin-Ya; Tsuda, Shuhei; Sato, Tsutomu

2017-09-12

Gene rearrangement is a widely-shared phenomenon in spore forming bacteria, in which prophage(-like) elements interrupting sporulation-specific genes are excised from the host genome to reconstitute the intact gene. Here, we report a novel class of gene-intervening elements, named gin, inserted in the 225 bp gerE-coding region of the B. cereus ATCC10987 genome, which generates a sporulation-specific rearrangement. gin has no phage-related genes and possesses three site-specific recombinase genes; girA, girB, and girC. We demonstrated that the gerE rearrangement occurs at the middle stage of sporulation, in which site-specific DNA recombination took place within the 9 bp consensus sequence flanking the disrupted gerE segments. Deletion analysis of gin uncovered that GirC and an additional factor, GirX, are responsible for gerE reconstitution. Involvement of GirC and GirX in DNA recombination was confirmed by an in vitro recombination assay. These results broaden the definition of the sporulation-specific gene rearrangement phenomenon: gene-intervening elements are not limited to phage DNA but may include non-viral genetic elements that carry a developmentally-regulated site-specific recombination system.

Lateral-directional aerodynamic characteristics of light, twin-engine, propeller driven airplanes

NASA Technical Reports Server (NTRS)

Wolowicz, C. H.; Yancey, R. B.

1972-01-01

Analytical procedures and design data for predicting the lateral-directional static and dynamic stability and control characteristics of light, twin engine, propeller driven airplanes for propeller-off and power-on conditions are reported. Although the consideration of power effects is limited to twin engine airplanes, the propeller-off considerations are applicable to single engine airplanes as well. The procedures are applied to a twin engine, propeller driven, semi-low-wing airplane in the clean configuration through the linear lift range. The calculated derivative characteristics are compared with wind tunnel and flight data. Included in the calculated characteristics are the spiral mode, roll mode, and Dutch roll mode over the speed range of the airplane.

Induction of antioxidant enzyme activities by a phenylurea derivative, EDU.

PubMed

Stevens, T M; Boswell, G A; Adler, R; Ackerman, N R; Kerr, J S

1988-10-01

Oxygen free radicals have the potential to mediate cell injury. Defenses against such radicals include the antioxidant enzymes superoxide dismutase (SOD), catalase (CAT), and glutathione peroxidase (GSH-PX). The purposes of this study were (1) to develop an in vitro model using human cells in which to investigate a potential pharmacologic agent as an inducer of these antioxidant enzymes; (2) to investigate the phenylurea derivative N-[2-(2-oxo-1-imidazolindinyl)ethyl]-N-phenylurea (EDU) in this model with paraquat (PQ) serving as the positive control; and (3) to determine if induction of the antioxidant enzymes by EDU occurs in vivo. Human gingival fibroblasts (Gin-1) were used as the target cell in vitro; PQ and EDU, an inducer of SOD and CAT activities in plants, were evaluated as antioxidant enzyme inducers. Total SOD activity in Gin-1 cells increased 2-fold (p less than 0.05) in the presence of 1.0 mM PQ for 18-48 hr compared with untreated controls. Gin-1 cells incubated with 0.25-2.0 mM PQ for 24 hr had significantly increased total SOD (1.5 to 2.0-fold; p less than 0.05). CAT activity increased with 1.0 and 2.0 mM PQ (p less than 0.05). In the presence of PQ, GSH-PX activity decreased (p less than 0.05) in a concentration-dependent manner, indicating inactivation of this enzyme. No toxicity, indicated by lactate dehydrogenase released into the incubation medium, was noted at PQ concentrations below 5.0 mM. In the presence of 0.125-2.0 mM EDU, total SOD activity in Gin-1 cells significantly increased (1.5 to 2.0-fold; p less than 0.05). CAT activity significantly increased in a dose-dependent manner (p less than 0.05), while GSH-PX activity remained constant following exposure to 0.125-2.0 mM EDU. Intraperitoneal administration of EDU to rats twice a day for 2 days at 100 mg/kg induced SOD activity in heart, liver, and lung compared to controls (p less than 0.05). CAT activity increased in the liver 56% and in the lung 36% (p less than 0.05). GSH-PX activity remained constant. Our findings indicate that Gin-1 cells are a useful model in which to study inducers of antioxidant enzymes in vitro and that the phenylurea compound EDU induces SOD and CAT activities both in vitro and in vivo.

Vibration Propagation of Gear Dynamics in a Gear-Bearing-Housing System Using Mathematical Modeling and Finite Element Analysis

NASA Technical Reports Server (NTRS)

Parker, Robert G.; Guo, Yi; Eritenel, Tugan; Ericson, Tristan M.

2012-01-01

Vibration and noise caused by gear dynamics at the meshing teeth propagate through power transmission components to the surrounding environment. This study is devoted to developing computational tools to investigate the vibro-acoustic propagation of gear dynamics through a gearbox using different bearings. Detailed finite element/contact mechanics and boundary element models of the gear/bearing/housing system are established to compute the system vibration and noise propagation. Both vibration and acoustic models are validated by experiments including the vibration modal testing and sound field measurements. The effectiveness of each bearing type to disrupt vibration propagation is speed-dependent. Housing plays an important role in noise radiation .It, however, has limited effects on gear dynamics. Bearings are critical components in drivetrains. Accurate modeling of rolling element bearings is essential to assess vibration and noise of drivetrain systems. This study also seeks to fully describe the vibro-acoustic propagation of gear dynamics through a power-transmission system using rolling element and fluid film wave bearings. Fluid film wave bearings, which have higher damping than rolling element bearings, could offer an energy dissipation mechanism that reduces the gearbox noise. The effectiveness of each bearing type to disrupt vibration propagation in explored using multi-body computational models. These models include gears, shafts, rolling element and fluid film wave bearings, and the housing. Radiated noise is mapped from the gearbox surface to surrounding environment. The effectiveness of rolling element and fluid film wave bearings in breaking the vibro-acoustic propagation path from the gear to the housing is investigated.

Rolling Bearing Life Prediction, Theory, and Application

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.

2013-01-01

A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg- Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application.

Rolling Thunder -- Integration of the Solo 161 Stirling engine with the CPG-460 solar concentrator at Ft. Huachuca

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diver, R.B.; Moss, T.A.; Goldberg, V.

Project Rolling Thunder is a dish/Stirling demonstration project at Ft. Huachuca, a US Army fort in southeastern Arizona (Huachuca means rolling thunder in Apache). It has been supported by the Strategic Environmental Research and Development Program (SERDP), a cooperative program between the Department of Defense (DoD) and the Department of Energy (DOE). As part of a 1992 SERDP project, Cummins Power Generation, Inc. (CPG) installed a CPG 7 kW(c) dish/Stirling system at the Joint Interoperability Test Command (JITC) in Ft. Huachuca, Arizona. The primary objective of the SERDP Dish/Stirling for DoD Applications project was to demonstrate a CPG 7-kW(c) dish/Stirlingmore » system at a military facility. Unfortunately, Cummins Engine Company decided to divest its solar operations. As a direct result of Ft. Huachuca`s interest in the Cummins dish/Stirling technology, Sandia explored the possibility of installing a SOLO 161 Stirling power conversion unit (PCU) on the Ft. Huachuca CPG-460. In January 1997, a decision was made to retrofit a SOLO 161 Stirling engine on the CPG-460 at Ft. Huachuca. Project Rolling Thunder. The SOLO 161 Demonstration at Ft. Huachuca has been a challenge. Although, the SOLO 161 PCU has operated nearly flawlessly and the CPG-460 has been, for the most part, a solid and reliable component, integration of the SOLO PCU with the CPG-460 has required significant attention. In this paper, the integration issues and technical approaches of project Rolling Thunder are presented. Lessons of the project are also discussed.« less

The development, design and test of a 66 W/kg (30-W/lb) roll-up solar array

NASA Technical Reports Server (NTRS)

Hasbach, W. A.; Ross, R. G., Jr.

1972-01-01

A program to develop a 250 square foot roll-up solar array with a power-to-weight ratio exceeding 30 watts per pound is described. The system design and fabrication of a full scale engineering development model are discussed. The system and development test program results are presented. Special test equipment and test procedures are included, together with comparisons of experimental and analytical results.

Minimization of Roll Firings for Optimal Propellant Maneuvers

NASA Astrophysics Data System (ADS)

Leach, Parker C.

Attitude control of the International Space Station (ISS) is critical for operations, impacting power, communications, and thermal systems. The station uses gyroscopes and thrusters for attitude control, and reorientations are normally assisted by thrusters on docked vehicles. When the docked vehicles are unavailable, the reduction in control authority in the roll axis results in frequent jet firings and massive fuel consumption. To improve this situation, new guidance and control schemes are desired that provide control with fewer roll firings. Optimal control software was utilized to solve for potential candidates that satisfied desired conditions with the goal of minimizing total propellant. An ISS simulation too was then used to test these solutions for feasibility. After several problem reformulations, multiple candidate solutions minimizing or completely eliminating roll firings were found. Flight implementation would not only save massive amounts of fuel and thus money, but also reduce ISS wear and tear, thereby extending its lifetime.

Optical enhancement of a printed organic tandem solar cell using diffractive nanostructures.

PubMed

Mayer, Jan A; Offermans, Ton; Chrapa, Marek; Pfannmöller, Martin; Bals, Sara; Ferrini, Rolando; Nisato, Giovanni

2018-03-19

Solution processable organic tandem solar cells offer a promising approach to achieve cost-effective, lightweight and flexible photovoltaics. In order to further enhance the efficiency of optimized organic tandem cells, diffractive light-management nanostructures were designed for an optimal redistribution of the light as function of both wavelength and propagation angles in both sub-cells. As the fabrication of these optical structures is compatible with roll-to-roll production techniques such as hot-embossing or UV NIL imprinting, they present an optimal cost-effective solution for printed photovoltaics. Tandem cells with power conversion efficiencies of 8-10% were fabricated in the ambient atmosphere by doctor blade coating, selected to approximate the conditions during roll-to-roll manufacturing. Application of the light management structure onto an 8.7% efficient encapsulated tandem cell boosted the conversion efficiency of the cell to 9.5%.

Tensor perturbations during inflation in a spatially closed Universe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonga, Béatrice; Gupt, Brajesh; Yokomizo, Nelson, E-mail: bpb165@psu.edu, E-mail: bgupt@gravity.psu.edu, E-mail: yokomizo@gravity.psu.edu

2017-05-01

In a recent paper [1], we studied the evolution of the background geometry and scalar perturbations in an inflationary, spatially closed Friedmann-Lemaȋtre-Robertson-Walker (FLRW) model having constant positive spatial curvature and spatial topology S{sup 3}. Due to the spatial curvature, the early phase of slow-roll inflation is modified, leading to suppression of power in the scalar power spectrum at large angular scales. In this paper, we extend the analysis to include tensor perturbations. We find that, similarly to the scalar perturbations, the tensor power spectrum also shows suppression for long wavelength modes. The correction to the tensor spectrum is limited tomore » the very long wavelength modes, therefore the resulting observable CMB B-mode polarization spectrum remains practically the same as in the standard scenario with flat spatial sections. However, since both the tensor and scalar power spectra are modified, there are scale dependent corrections to the tensor-to-scalar ratio that leads to violation of the standard slow-roll consistency relation.« less

29 CFR 500.20 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...

29 CFR 500.20 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...

29 CFR 500.20 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...

29 CFR 500.20 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...

29 CFR 500.20 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ultimate question of economic dependency, is a qualitative rather than quantitative analysis. The factors...) When employed in canning, packing, ginning, seed conditioning or related research, or processing...

Mathematical Modeling of the Effect of Roll Diameter on the Thermo-Mechanical Behavior of Twin Roll Cast AZ31 Magnesium Alloy Strips

NASA Astrophysics Data System (ADS)

Hadadzadeh, Amir; Wells, Mary

Although the Twin Roll Casting (TRC) process has been used in the aluminum sheet production industry for more than 60 years, the usage of this process to fabricate magnesium sheets is still at its early stages. Similar to other manufacturing processes, the development of the TRC process for magnesium alloys has followed a typical route of preliminary studies using a laboratory-scale facility, followed by pilot-scale testing and most recently attempting to use an industrial-scale twin roll caster. A powerful tool to understand and quantify the trends of the processing conditions and effects of scaling up from a laboratory size TRC machine to an industrial scale one is develop a mathematical model of the process. This can elucidate the coupled fluid-thermo-mechanical behavior of the cast strip during the solidification and then deformation stages of the process. In the present study a Thermal-Fluid-Stress model has been developed for TRC of AZ31 magnesium alloy for three roll diameters by employing the FEM commercial package ALSIM. The roll diameters were chosen as 355mm, 600mm and 1150mm. The effect of casting speed for each diameter was studied in terms of fluid flow, thermal history and stress-strain evolution in the cast strip in the roll bite region.

A power-autonomous self-rolling wheel using ionic and capacitive actuators

NASA Astrophysics Data System (ADS)

Must, Indrek; Kaasik, Toomas; Baranova, Inna; Johanson, Urmas; Punning, Andres; Aabloo, Alvo

2015-04-01

Ionic electroactive polymer (IEAP) laminates are often considered as perspective actuator technology for mobile robotic appliances; however, only a few real proof-of-concept-stage robots have been built previously, a majority of which are dependent on an off-board power supply. In this work, a power-autonomous robot, propelled by four IEAP actuators having carbonaceous electrodes, is constructed. The robot consists of a light outer section in the form of a hollow cylinder, and a heavy inner section, referred to as the rim and the hub, respectively. The hub is connected to the rim using IEAP actuators, which form `spokes' of variable length. The effective length of the spokes is changed via charging and discharging of the capacitive IEAP actuators and a change in the effective lengths of the spokes eventuate in a rolling motion of the robot. The constructed IEAP robot takes advantage of the distinctive properties of the IEAP actuators. The IEAP actuators transform the geometry of the whole robot, while being soft and compliant. The low-voltage IEAP actuators in the robot are powered directly from an embedded single-cell lithium-ion battery, with no voltage regulation required; instead, only the input current is regulated. The charging of the actuators is commuted correspondingly to the robot's transitory position using an on-board control electronics. The constructed robot is able to roll for an extended period on a smooth surface. The locomotion of the IEAP robot is analyzed using video recognition.

Ultralight amorphous silicon alloy photovoltaic modules for space and terrestrial applications

NASA Astrophysics Data System (ADS)

Hanak, J. J.; Fulton, C.; Myatt, A.; Nath, P.; Woodyard, J. R.

This paper gives a review and an update on recently developed ultralight photovoltaic modules based on amorphous silicon (a-Si) alloys. They consist of tandem-junction solar cells deposited by a continuous, roll-to-roll process onto thin, foil substrates of bare metal, high temperature resin or metal coated with insulators. They have the following features: size, up to 71 cm x 30.5 cm; total thickness, 8 to 50 microns; power-to-weight at AM1, 2.4 kW/kg; and power-to-volume ratio 6.5 MW/cu m. Cells of a-Si alloys are over 50 times more tolerant to irradiation with 1 MeV and with 200 keV protons than crystalline cells and the damage is easily annealable. The modules have high power density and stability, they are portable, stowable, deployable, retractable, tolerant to radiation and meteorite or projectile impact and attractive for terrestrial and aerospace applications.

Impact of Wind Shear Characteristics on Roll Structure in Idealized Hurricane Boundary Layers

NASA Astrophysics Data System (ADS)

Wang, S.; Jiang, Q.

2016-12-01

The hurricane boundary layer (HBL) is well known for its critical role in evolutions of tropical cyclones (TCs) as the air-sea interaction represents both the most important source and sink of the moist available energy and the kinetic energy, respectively. One of the frequently occurring features in the HBL is horizontal roll vortices, which have quasi-two dimensional coherent and banded structure extending from the surface to the top of the HBL. It is believed that this highly coherent structure, caused by the inflection point instability in the basic wind profiles, plays an important role in organizing turbulent transport. To understand this role, large-eddy simulations are conducted to investigate how the wind shear characteristics such as the shear strength and inflection-point level can impact the roll structure in terms of its spectral characteristics and turbulence organization. A mean wind profile nudging approach is used in the simulations to maintain the required mean wind shear without directly affecting turbulent motions. Enhancing the radial wind shear expands the roll horizontal scale and strengthens the roll's kinetic energy. Increasing the inflection-point level tends to produce a narrow and sharp peak in the power spectrum at the wavelength consistent with the roll spacing indicated by the instantaneous turbulent fields. The spectral tangential momentum flux, in particular, reaches a strong peak value at the roll wavelength. In contrast, the spectral radial momentum flux obtains its maximum at the wavelength that is usually shorter than the roll's, suggesting that the roll radial momentum transport is less efficient than the tangential. The most robust rolls are produced in a simulation with the highest inflection-point level and strong radial wind shear. Based on the spectral analysis, the roll-scale contribution to the turbulent momentum flux can reach 40% in the middle of the boundary layer.

Primordial spectra of slow-roll inflation at second-order with the Gauss-Bonnet correction

NASA Astrophysics Data System (ADS)

Wu, Qiang; Zhu, Tao; Wang, Anzhong

2018-05-01

The slow-roll inflation for a single scalar field that couples to the Gauss-Bonnet (GB) term represents an important higher-order curvature correction inspired by string theory. With the arrival of the era of precision cosmology, it is expected that the high-order corrections become more and more important. In this paper we study the observational predictions of the slow-roll inflation with the GB term by using the third-order uniform asymptotic approximation method. We calculate explicitly the primordial power spectra, spectral indices, running of the spectral indices for both scalar and tensor perturbations, and the ratio between tensor and scalar spectra. These expressions are all written in terms of the Hubble and GB coupling flow parameters and expanded up to the next-to-leading order in the slow-roll expansions so they represent the most accurate results obtained so far in the literature. In addition, by studying the theoretical predictions of the scalar spectral index and the tensor-to-scalar ratio with the Planck 2015 constraints in a model with power-law potential and GB coupling, we show that the second-order corrections are important in the future measurements. We expect that the understanding of the GB corrections in the primordial spectra and their constraints by forthcoming observational data will provide clues for the UV complete theory of quantum gravity, such as the string/M-theory.

Multi-Fault Diagnosis of Rolling Bearings via Adaptive Projection Intrinsically Transformed Multivariate Empirical Mode Decomposition and High Order Singular Value Decomposition

PubMed Central

Lv, Yong; Song, Gangbing

2018-01-01

Rolling bearings are important components in rotary machinery systems. In the field of multi-fault diagnosis of rolling bearings, the vibration signal collected from single channels tends to miss some fault characteristic information. Using multiple sensors to collect signals at different locations on the machine to obtain multivariate signal can remedy this problem. The adverse effect of a power imbalance between the various channels is inevitable, and unfavorable for multivariate signal processing. As a useful, multivariate signal processing method, Adaptive-projection has intrinsically transformed multivariate empirical mode decomposition (APIT-MEMD), and exhibits better performance than MEMD by adopting adaptive projection strategy in order to alleviate power imbalances. The filter bank properties of APIT-MEMD are also adopted to enable more accurate and stable intrinsic mode functions (IMFs), and to ease mode mixing problems in multi-fault frequency extractions. By aligning IMF sets into a third order tensor, high order singular value decomposition (HOSVD) can be employed to estimate the fault number. The fault correlation factor (FCF) analysis is used to conduct correlation analysis, in order to determine effective IMFs; the characteristic frequencies of multi-faults can then be extracted. Numerical simulations and the application of multi-fault situation can demonstrate that the proposed method is promising in multi-fault diagnoses of multivariate rolling bearing signal. PMID:29659510

Multi-Fault Diagnosis of Rolling Bearings via Adaptive Projection Intrinsically Transformed Multivariate Empirical Mode Decomposition and High Order Singular Value Decomposition.

PubMed

Yuan, Rui; Lv, Yong; Song, Gangbing

2018-04-16

Rolling bearings are important components in rotary machinery systems. In the field of multi-fault diagnosis of rolling bearings, the vibration signal collected from single channels tends to miss some fault characteristic information. Using multiple sensors to collect signals at different locations on the machine to obtain multivariate signal can remedy this problem. The adverse effect of a power imbalance between the various channels is inevitable, and unfavorable for multivariate signal processing. As a useful, multivariate signal processing method, Adaptive-projection has intrinsically transformed multivariate empirical mode decomposition (APIT-MEMD), and exhibits better performance than MEMD by adopting adaptive projection strategy in order to alleviate power imbalances. The filter bank properties of APIT-MEMD are also adopted to enable more accurate and stable intrinsic mode functions (IMFs), and to ease mode mixing problems in multi-fault frequency extractions. By aligning IMF sets into a third order tensor, high order singular value decomposition (HOSVD) can be employed to estimate the fault number. The fault correlation factor (FCF) analysis is used to conduct correlation analysis, in order to determine effective IMFs; the characteristic frequencies of multi-faults can then be extracted. Numerical simulations and the application of multi-fault situation can demonstrate that the proposed method is promising in multi-fault diagnoses of multivariate rolling bearing signal.

Astrometric Telescope Facility isolation and pointing study

NASA Technical Reports Server (NTRS)

Hibble, William; Allen, Terry; Jackson, Louis; Medbery, James; Self, Richard

1988-01-01

The Astrometric Telescope Facility (ATF), an optical telescope designed to detect extrasolar planetary systems, is scheduled to be a major user of the Space Station's Payload Pointing System (PPS). However, because the ATF has such a stringent pointing stability specification and requires + or - 180 deg roll about its line of sight, mechanisms to enhance the basic PPS capability are required. The ATF pointing performance achievable by the addition of a magnetic isolation and pointing system (MIPS) between the PPS upper gimbal and the ATF, and separately, by the addition of a passive isolation system between the Space Station and the PPS base was investigated. The candidate MIPS can meet the ATF requirements in the presence of a 0.01 g disturbance. It fits within the available annular region between the PPS and the ATF while meeting power and weight limitations and providing the required roll motion, payload data and power services. By contrast, the passive base isolator system must have an unrealistically low isolation bandwidth on all axes to meet ATF pointing requirements and does not provide roll about the line of sight.

Flex-gear electrical power transmission

NASA Technical Reports Server (NTRS)

Vranish, John; Peritt, Jonathan

1993-01-01

This study was conducted to develop an alternative way of transferring electricity across a continuously rotating joint, with little wear and the potential for low electrical noise. The problems with wires, slip rings, electromagnetic couplings, and recently invented roll-rings are discussed. Flex-gears, an improvement of roll-rings, are described. An entire class of flexgear devices is developed. Finally, the preferred flex-gear device is optimized for maximum electrical contact and analyzed for average mechanical power loss and maximum stress. For a device diameter of six inches, the preferred device is predicted to have a total electrical contact area of 0.066 square inches. In the preferred device, a small amount of internal sliding produces a 0.003 inch-pound torque that resists the motion of the device.

Ground-based and in-flight simulator studies of low-speed handling characteristics of two supersonic cruise transport concepts

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Nguyen, L. T.; Deal, P. L.; Neubauer, M. J.; Smith, P. M.; Gregory, F. D.

1978-01-01

Conventional and powered lift concepts for supersonic approach and landing tasks are considered. Results indicated that the transport concepts had unacceptable low-speed handling qualities with no augmentation, and that in order to achieve satisfactory handling qualities, considerable augmentation was required. The available roll-control power was acceptable for the powered-lift concept.

PV/thermal solar power assembly

DOEpatents

Ansley, Jeffrey H.; Botkin, Jonathan D.; Dinwoodie, Thomas L.

2004-01-13

A flexible solar power assembly (2) includes a flexible photovoltaic device (16) attached to a flexible thermal solar collector (4). The solar power assembly can be rolled up for transport and then unrolled for installation on a surface, such as the roof (20, 25) or side wall of a building or other structure, by use of adhesive and/or other types of fasteners (23).

In-situ Roll-to-Roll Printing of Highly Efficient Organic Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bao, Zhenan; Toney, Michael; Clancy, Paulette

2016-05-30

This project focuses on developing a roll-to-roll printing setup for organic solar cells with the capability to follow the film formation in situ with small and wide angle X-ray scattering, and to improve the performance of printed organic solar cells. We demonstrated the use of the printing setup to capture important aspects of existing industrial printing methods, which ensures that the solar cell performance achieved in our printing experiments would be largely retained in an industrial fabrication process. We employed both known and newly synthesized polymers as the donor and acceptor materials, and we studied the morphological changes in realmore » time during the printing process by X-ray scattering. Our experimental efforts are also accompanied by theoretical modeling of both the fluid dynamic aspects of the printing process and the nucleation and crystallization kinetics during the film formation. The combined insight into the printing process gained from the research provides a detailed understanding of the factors governing the printed solar cell’s performance. Finally using the knowledge we gained, we demonstrated large area ( > 10 cm2) printed organic solar cells with more than 5 percent power conversion efficiency, which is best achieved performance for roll-to-roll printed organic solar cells.« less

Differential Canard deflection for generation of yawing moment on the X-31 with and without the vertical tail. M.S. Thesis - George Washington Univ.

NASA Technical Reports Server (NTRS)

Whiting, Matthew Robert

1996-01-01

The feasibility of augmenting the available yaw control power on the X-31 through differential deflection of the canard surfaces was studied as well as the possibility of using differential canard control to stabilize the X-31 with its vertical tail removed. Wind-tunnel tests and the results of departure criteria and linear analysis showed the destabilizing effect of the reduction of the vertical tail on the X-31. Wind-tunnel testing also showed that differential canard deflection was capable of generating yawing moments of roughly the same magnitude as the thrust vectoring vanes currently in place on the X-31 in the post-stall regime. Analysis showed that the X-31 has sufficient aileron roll control power that with the addition of differential canard as a yaw controller, the wind-axis roll accelerations will remain limited by yaw control authority. It was demonstrated, however, that pitch authority may actually limit the maximum roll rate which can be sustained. A drop model flight test demonstrated that coordinated, wind axis rolls could be performed with roll rates as high as 50 deg/sec (full scale equivalent) at 50 deg angle of attack. Another drop model test was conducted to assess the effect of vertical tail reduction, and an analysis of using differential canard deflection to stabilize the tailless X-31 was performed. The results of six-degree-of-freedom, non-linear simulation tests were correlated with the drop model flights. Simulation studies then showed that the tailless X-31 could be controlled at angles of attack at or above 20 deg using differential canard as the only yaw controller.

Chemical pretreatment of lignocellulosic agroindustrial waste for methane production.

PubMed

Pellera, Frantseska-Maria; Gidarakos, Evangelos

2018-01-01

This study investigates the effect of different chemical pretreatments on the solubilization and the degradability of different solid agroindustrial waste, namely winery waste, cotton gin waste, olive pomace and juice industry waste. Eight different reagents were investigated, i.e. sodium hydroxide (NaOH), sodium bicarbonate (NaHCO 3 ), sodium chloride (NaCl), citric acid (H 3 Cit), acetic acid (AcOH), hydrogen peroxide (H 2 O 2 ), acetone (Me 2 CO) and ethanol (EtOH), under three condition sets resulting in treatments of varying intensity, depending on process duration, reagent dosage and temperature. Results indicated that chemical pretreatment under more severe conditions is more effective on the solubilization of lignocellulosic substrates, such as those of the present study and among the investigated reagents, H 3 Cit, H 2 O 2 and EtOH appeared to be the most effective to this regard. At the same time, although chemical pretreatment in general did not improve the methane potential of the substrates, moderate to high severity conditions were found to generally be the most satisfactory in terms of methane production from pretreated materials. In fact, moderate severity treatments using EtOH for winery waste, H 3 Cit for olive pomace and H 2 O 2 for juice industry waste and a high severity treatment with EtOH for cotton gin waste, resulted in maximum specific methane yield values. Ultimately, the impact of pretreatment parameters on the different substrates seems to be dependent on their characteristics, in combination with the specific mode of action of each reagent. The overall energy balance of such a system could probably be improved by using lower operating powers and higher solid to liquid ratios. Copyright © 2017 Elsevier Ltd. All rights reserved.

Characterization of wear debris generated in accelerated rolling-element fatigue tests

NASA Technical Reports Server (NTRS)

Jones, W. R., Jr.; Parker, R. J.

1978-01-01

A ferrographic analysis was used to determine the types and quantities of wear debris generated during accelerated rolling contact fatigue tests. The five-ball rolling contact fatigue tester was used. Ball specimens were made of a corrosion resistant, high-temperature bearing steel. The lubricant was a superrefined naphthenic mineral oil. Conditions included a maximum Hertz stress of 5.52 10 to the 9th power Pa and a shaft speed of 10,000 rpm. Four types of wear debris were observed: (1) normal rubbing wear particles, (2) fatigue microspall particles, (3) spheres, and (4) friction polymer deposits. The characterization of wear debris as a function of time was of limited use in predicting fatigue failures in these accelerated tests.

Globally Stable Microresonator Turing Pattern Formation for Coherent High-Power THz Radiation On-Chip

NASA Astrophysics Data System (ADS)

Huang, Shu-Wei; Yang, Jinghui; Yang, Shang-Hua; Yu, Mingbin; Kwong, Dim-Lee; Zelevinsky, T.; Jarrahi, Mona; Wong, Chee Wei

2017-10-01

In nonlinear microresonators driven by continuous-wave (cw) lasers, Turing patterns have been studied in the formalism of the Lugiato-Lefever equation with emphasis on their high coherence and exceptional robustness against perturbations. Destabilization of Turing patterns and the transition to spatiotemporal chaos, however, limit the available energy carried in the Turing rolls and prevent further harvest of their high coherence and robustness to noise. Here, we report a novel scheme to circumvent such destabilization, by incorporating the effect of local mode hybridizations, and we attain globally stable Turing pattern formation in chip-scale nonlinear oscillators with significantly enlarged parameter space, achieving a record-high power-conversion efficiency of 45% and an elevated peak-to-valley contrast of 100. The stationary Turing pattern is discretely tunable across 430 GHz on a THz carrier, with a fractional frequency sideband nonuniformity measured at 7.3 ×10-14 . We demonstrate the simultaneous microwave and optical coherence of the Turing rolls at different evolution stages through ultrafast optical correlation techniques. The free-running Turing-roll coherence, 9 kHz in 200 ms and 160 kHz in 20 minutes, is transferred onto a plasmonic photomixer for one of the highest-power THz coherent generations at room temperature, with 1.1% optical-to-THz power conversion. Its long-term stability can be further improved by more than 2 orders of magnitude, reaching an Allan deviation of 6 ×10-10 at 100 s, with a simple computer-aided slow feedback control. The demonstrated on-chip coherent high-power Turing-THz system is promising to find applications in astrophysics, medical imaging, and wireless communications.

Ferrographic analysis of wear debris generated in accelerated rolling element fatigue tests

NASA Technical Reports Server (NTRS)

Jones, W. R., Jr.; Parker, R. J.

1977-01-01

The types and quantities of wear particles generated during accelerated ball rolling contact fatigue tests were determined. Ball specimens were made of AMS 5749, a corrosion resistant, high-temperature bearing steel. The lubricant was a super-refined naphthenic mineral oil. Conditions included a maximum Hertz stress of 5.215 times 10 to the 9th power Pa and a shaft speed of 10,000 rpm. Four types of wear particles were observed; normal rubbing wear particles, fatigue spall particles, spheres, and friction polymer.

Bound on largest r ∼< 0.1 from sub-Planckian excursions of inflaton

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chatterjee, Arindam; Mazumdar, Anupam, E-mail: arindam@hri.res.in, E-mail: a.mazumdar@lancaster.ac.uk

2015-01-01

In this paper we will discuss the range of large tensor to scalar ratio, r, obtainable from a sub-Planckian excursion of a single, slow roll driven inflaton field. In order to obtain a large r for such a scenario one has to depart from a monotonic evolution of the slow roll parameters in such a way that one still satisfies all the current constraints of \\texttt(Planck), such as the scalar amplitude, the tilt in the scalar power spectrum, running and running of the tilt close to the pivot scale. Since the slow roll parameters evolve non-monotonically, we will also considermore » the evolution of the power spectrum on the smallest scales, i.e. at P{sub s}(k ∼ 10{sup 16} Mpc{sup −1})∼< 10{sup −2}, to make sure that the amplitude does not become too large. All these constraints tend to keep the tensor to scalar ratio, r ∼< 0.1. We scan three different kinds of potential for supersymmetric flat directions and obtain the benchmark points which satisfy all the constraints. We also show that it is possible to go beyond r ∼> 0.1 provided we relax the upper bound on the power spectrum on the smallest scales.« less

BINGO: a code for the efficient computation of the scalar bi-spectrum

NASA Astrophysics Data System (ADS)

Hazra, Dhiraj Kumar; Sriramkumar, L.; Martin, Jérôme

2013-05-01

We present a new and accurate Fortran code, the BI-spectra and Non-Gaussianity Operator (BINGO), for the efficient numerical computation of the scalar bi-spectrum and the non-Gaussianity parameter fNL in single field inflationary models involving the canonical scalar field. The code can calculate all the different contributions to the bi-spectrum and the parameter fNL for an arbitrary triangular configuration of the wavevectors. Focusing firstly on the equilateral limit, we illustrate the accuracy of BINGO by comparing the results from the code with the spectral dependence of the bi-spectrum expected in power law inflation. Then, considering an arbitrary triangular configuration, we contrast the numerical results with the analytical expression available in the slow roll limit, for, say, the case of the conventional quadratic potential. Considering a non-trivial scenario involving deviations from slow roll, we compare the results from the code with the analytical results that have recently been obtained in the case of the Starobinsky model in the equilateral limit. As an immediate application, we utilize BINGO to examine of the power of the non-Gaussianity parameter fNL to discriminate between various inflationary models that admit departures from slow roll and lead to similar features in the scalar power spectrum. We close with a summary and discussion on the implications of the results we obtain.

Solar breeze power package and saucer ship

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veazey, S. E.

1985-11-12

A solar breeze power package having versatile sail and windmast options useful both on land and sea and especially useful in the saucer ship type design. The Vertical Axis Wind Turbine (VAWT) of the several Darrieus designs in conjunction with roll-up or permanently mounted solar cells combine in a hybrid or are used separately to provide power to a battery bank or other storage device.

Design and evaluation of multi-indicator profiles for targeted-selective treatment against gastrointestinal nematodes at housing in adult dairy cows.

PubMed

Ravinet, Nadine; Lehebel, Anne; Bareille, Nathalie; Lopez, Carlos; Chartier, Christophe; Chauvin, Alain; Madouasse, Aurélien

2017-04-15

Targeted-selective treatments against gastrointestinal nematode (GIN) in adult dairy cows require the identification of "cows to treat", i.e. cows whose milk production (MP) would increase after treatment. This study aimed at quantifying the ability of multi-indicator profiles to identify such cows. A randomized controlled clinical trial was conducted at housing in 25 French pasturing dairy herds. In each herd, treated cows received fenbendazole orally, control cows remained untreated. Daily MP was recorded and the MP variation between the pre- and post-visit periods was calculated (ΔMP) for each cow. ΔMP was modelled with control cows data (n=412) (piecewise linear mixed model). Estimated parameters were applied to treated cows data (n=414) to predict the expected ΔMP in treated cows if they had not been treated. Treated cows with an observed ΔMP (with treatment) higher than the expected ΔMP (without treatment) were labelled as "cows to treat". Herds where at least 50% of the young cows were "cows to treat" were qualified as "herds to target". To characterize such cows and herds, the available candidate indicators were (i) at the cow-level: parity, stage of lactation and production level, faecal egg count (FEC), serum pepsinogen level and anti-Ostertagia antibody level (expressed as ODR); (ii) at the herd-level: bulk tank milk (BTM) Ostertagia ODR, Time of Effective Contact (TEC, in months) with GIN infective larvae before the first calving, and percentage of positive FEC. These indicators were tested one-by-one or in combination to assess their ability to characterize "herds to target" and "cows to treat" (Chi-square tests). 115 out of 414 treated cows (27.8%) were considered as "cows to treat", and 9 out of 22 herds were qualified as "herds to target". The indicators retained to profile such cows and herds were the parity, the production level, the BTM Ostertagia ODR and the TEC. Multi-indicator profiles were much more specific than single indicator profiles, induced lower treatment rates, thereby minimizing the selection pressure on parasite populations. Particularly, to target a herd, the specificity was better with the profile "high BTM Ostertagia ODR and low-TEC" than with the BTM ODR value taken into account alone. The targeted-selective treatment of "young cows, belonging to herds with a high BTM ODR at housing and a low TEC" appeared as a pertinent solution, enabling a global approach for the control of GIN infection in which GIN control in heifers is connected to GIN control in adult cows. Copyright © 2017 Elsevier B.V. All rights reserved.

A molecular nematic liquid crystalline material for high-performance organic photovoltaics

PubMed Central

Sun, Kuan; Xiao, Zeyun; Lu, Shirong; Zajaczkowski, Wojciech; Pisula, Wojciech; Hanssen, Eric; White, Jonathan M.; Williamson, Rachel M.; Subbiah, Jegadesan; Ouyang, Jianyong; Holmes, Andrew B.; Wong, Wallace W.H.; Jones, David J.

2015-01-01

Solution-processed organic photovoltaic cells (OPVs) hold great promise to enable roll-to-roll printing of environmentally friendly, mechanically flexible and cost-effective photovoltaic devices. Nevertheless, many high-performing systems show best power conversion efficiencies (PCEs) with a thin active layer (thickness is ~100 nm) that is difficult to translate to roll-to-roll processing with high reproducibility. Here we report a new molecular donor, benzodithiophene terthiophene rhodanine (BTR), which exhibits good processability, nematic liquid crystalline behaviour and excellent optoelectronic properties. A maximum PCE of 9.3% is achieved under AM 1.5G solar irradiation, with fill factor reaching 77%, rarely achieved in solution-processed OPVs. Particularly promising is the fact that BTR-based devices with active layer thicknesses up to 400 nm can still afford high fill factor of ~70% and high PCE of ~8%. Together, the results suggest, with better device architectures for longer device lifetime, BTR is an ideal candidate for mass production of OPVs. PMID:25586307

Roll-to-Roll Laser-Printed Graphene-Graphitic Carbon Electrodes for High-Performance Supercapacitors.

PubMed

Kang, Sangmin; Lim, Kyungmi; Park, Hyeokjun; Park, Jong Bo; Park, Seong Chae; Cho, Sung-Pyo; Kang, Kisuk; Hong, Byung Hee

2018-01-10

Carbon electrodes including graphene and thin graphite films have been utilized for various energy and sensor applications, where the patterning of electrodes is essentially included. Laser scribing in a DVD writer and inkjet printing were used to pattern the graphene-like materials, but the size and speed of fabrication has been limited for practical applications. In this work, we devise a simple strategy to use conventional laser-printer toner materials as precursors for graphitic carbon electrodes. The toner was laser-printed on metal foils, followed by thermal annealing in hydrogen environment, finally resulting in the patterned thin graphitic carbon or graphene electrodes for supercapacitors. The electrochemical cells made of the graphene-graphitic carbon electrodes show remarkably higher energy and power performance compared to conventional supercapacitors. Furthermore, considering the simplicity and scalability of roll-to-roll (R2R) electrode patterning processes, the proposed method would enable cheaper and larger-scale synthesis and patterning of graphene-graphitic carbon electrodes for various energy applications in the future.

Impact of integrated gastrointestinal nematode management training for U.S. goat and sheep producers.

PubMed

Whitley, N C; Oh, S-H; Lee, S J; Schoenian, S; Kaplan, R M; Storey, B; Terrill, T H; Mobini, S; Burke, J M; Miller, J E; Perdue, M A

2014-03-01

The objective of this study was to determine the impact of integrated parasite management (IPM) training, including FAMACHA(©) eyelid color scoring, on the ability of U.S. sheep and goat producers to control gastrointestinal nematodes (GIN) on their farms. A survey was developed and provided to over 2000 producers trained from 2004 to 2008 in IPM with questions involving farm size (number of sheep/goats), location (U.S. state), impact of training on parasite control efforts and parasite problems on farm, and IPM practices used. Responses were divided into U.S. Census regions of the U.S. Descriptive statistics and logistic regression were used to describe results. Most of the 729 respondents were from the southern region of the U.S. (54.3%) and were small-scale producers (50 or less animals; 64.8%). Nearly all of the respondents (95.1%) agreed that IPM workshop attendance made a difference in their ability to control and monitor parasitism in their herd or flock and employed IPM practices to control GIN (96.3%). The most popular practices respondents used were rotational grazing (71.2%), genetic selection (choosing a parasite resistant breed and/or culling susceptible animals; 52.7%), grain supplementation on pasture to improve nutrition (44.0%), and increased height of plants being grazed (41.8%). Although reporting using a practice decreased (P<0.05) the likelihood of reporting fewer problems, for each 1-point increase in the number of practices which producers employed to control internal parasitism in their herd or flock, they were 16% more likely to report fewer GIN problems (P<0.05). Approximately 75% of respondents indicated an economic benefit of IPM on their farm (P<0.05), and those reporting savings of over $80 were more likely to report fewer problems (P<0.05) with parasites after the training while those reporting no economic benefit were less likely to report fewer problems with GIN (P<0.001). Overall, IPM training resulted in positive impacts for producers responding to the survey and should continue. Copyright © 2013 Elsevier B.V. All rights reserved.

Affordance Boundaries Are Defined by Dynamic Capabilities of Parkour Athletes in Dropping from Various Heights

PubMed Central

Croft, James L.; Bertram, John E. A.

2017-01-01

Available behaviors are determined by the fit between features of the individual and reciprocal features of the environment. Beyond some critical boundary certain behaviors become impossible causing sudden transitions from one movement pattern to another. Parkour athletes have developed multiple movement patterns to deal with their momentum during landing. We were interested in whether drop distance would cause a sudden transition between a two-footed (precision) landing and a load-distributing roll and whether the transition height could be predicted by dynamic and geometric characteristics of individual subjects. Kinematics and ground reaction forces were measured as Parkour athletes stepped off a box from heights that were incrementally increased or decreased from 0.6 to 2.3 m. Individuals were more likely to roll from higher drops; those with greater body mass and less explosive leg power, were more likely to transition to a roll landing at a lower height. At some height a two-footed landing is no longer feasible but for some athletes this height was well within the maximum drop height used in this study. During low drops the primary task constraint of managing momentum could be achieved with either a precision landing or a roll. This meant that participants were free to select their preferred landing strategy, which was only partially influenced by the physical demands of the task. However, athletes with greater leg power appeared capable of managing impulse absorption through a leg mediated strategy up to a greater drop height. PMID:28979219

Design and fabrication of micro-hotplates made on a polyimide foil: electrothermal simulation and characterization to achieve power consumption in the low mW range

NASA Astrophysics Data System (ADS)

Courbat, J.; Canonica, M.; Teyssieux, D.; Briand, D.; de Rooij, N. F.

2011-01-01

The design of ultra-low power micro-hotplates on a polyimide (PI) substrate supported by thermal simulations and characterization is presented. By establishing a method for the thermal simulation of very small scale heating elements, the goal of this study was to decrease the power consumption of PI micro-hotplates to a few milliwatts to make them suitable for very low power applications. To this end, the mean heat transfer coefficients in air of the devices were extracted by finite element analysis combined with very precise thermographic measurements. A simulation model was implemented for these hotplates to investigate both the influence of their downscaling and the bulk micromachining of the polyimide substrate to lower their power consumptions. Simulations were in very good agreement with the experimental results. The main parameters influencing significantly the power consumption at such dimensions were identified and guidelines were defined allowing the design of very small (15 × 15 µm) and ultra-low power heating elements (6 mW at 300 °C). These very low power heating structures enable the realization of flexible sensors, such as gas, flow or wind sensors, for applications in autonomous wireless sensors networks or RFID applications and make them compatible with large-scale production on foil such as roll-to-roll or printing processes.

Roll-to-Roll printed large-area all-polymer solar cells with 5% efficiency based on a low crystallinity conjugated polymer blend

NASA Astrophysics Data System (ADS)

Gu, Xiaodan; Zhou, Yan; Gu, Kevin; Kurosawa, Tadanori; Yan, Hongping; Wang, Cheng; Toney, Micheal; Bao, Zhenan

The challenge of continuous printing in high efficiency large-area organic solar cells is a key limiting factor for their widespread adoption. We present a materials design concept for achieving large-area, solution coated all-polymer bulk heterojunction (BHJ) solar cells with stable phase separation morphology between the donor and acceptor. The key concept lies in inhibiting strong crystallization of donor and acceptor polymers, thus forming intermixed, low crystallinity and mostly amorphous blends. Based on experiments using donors and acceptors with different degree of crystallinity, our results showed that microphase separated donor and acceptor domain sizes are inversely proportional to the crystallinity of the conjugated polymers. This methodology of using low crystallinity donors and acceptors has the added benefit of forming a consistent and robust morphology that is insensitive to different processing conditions, allowing one to easily scale up the printing process from a small scale solution shearing coater to a large-scale continuous roll-to-roll (R2R) printer. We were able to continuously roll-to-roll slot die print large area all-polymer solar cells with power conversion efficiencies of 5%, with combined cell area up to 10 cm2. This is among the highest efficiencies realized with R2R coated active layer organic materials on flexible substrate. DOE BRIDGE sunshot program. Office of Naval Research.

Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, Xiaodan; Zhou, Yan; Gu, Kevin

The challenge of continuous printing in high-efficiency large-area organic solar cells is a key limiting factor for their widespread adoption. We present a materials design concept for achieving large-area, solution-coated all-polymer bulk heterojunction solar cells with stable phase separation morphology between the donor and acceptor. The key concept lies in inhibiting strong crystallization of donor and acceptor polymers, thus forming intermixed, low crystallinity, and mostly amorphous blends. Based on experiments using donors and acceptors with different degree of crystallinity, the results show that microphase separated donor and acceptor domain sizes are inversely proportional to the crystallinity of the conjugated polymers.more » This particular methodology of using low crystallinity donors and acceptors has the added benefit of forming a consistent and robust morphology that is insensitive to different processing conditions, allowing one to easily scale up the printing process from a small-scale solution shearing coater to a large-scale continuous roll-to-roll (R2R) printer. Large-area all-polymer solar cells are continuously roll-to-roll slot die printed with power conversion efficiencies of 5%, with combined cell area up to 10 cm 2. This is among the highest efficiencies realized with R2R-coated active layer organic materials on flexible substrate.« less

Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend

DOE PAGES

Gu, Xiaodan; Zhou, Yan; Gu, Kevin; ...

2017-03-07

The challenge of continuous printing in high-efficiency large-area organic solar cells is a key limiting factor for their widespread adoption. We present a materials design concept for achieving large-area, solution-coated all-polymer bulk heterojunction solar cells with stable phase separation morphology between the donor and acceptor. The key concept lies in inhibiting strong crystallization of donor and acceptor polymers, thus forming intermixed, low crystallinity, and mostly amorphous blends. Based on experiments using donors and acceptors with different degree of crystallinity, the results show that microphase separated donor and acceptor domain sizes are inversely proportional to the crystallinity of the conjugated polymers.more » This particular methodology of using low crystallinity donors and acceptors has the added benefit of forming a consistent and robust morphology that is insensitive to different processing conditions, allowing one to easily scale up the printing process from a small-scale solution shearing coater to a large-scale continuous roll-to-roll (R2R) printer. Large-area all-polymer solar cells are continuously roll-to-roll slot die printed with power conversion efficiencies of 5%, with combined cell area up to 10 cm 2. This is among the highest efficiencies realized with R2R-coated active layer organic materials on flexible substrate.« less

Electromyographic analysis of traditional and nontraditional abdominal exercises: implications for rehabilitation and training.

PubMed

Escamilla, Rafael F; Babb, Eric; DeWitt, Ryan; Jew, Patrick; Kelleher, Patrick; Burnham, Toni; Busch, Juliann; D'Anna, Kristen; Mowbray, Ryan; Imamura, Rodney T

2006-05-01

Performing nontraditional abdominal exercises with devices such as abdominal straps, the Power Wheel, and the Ab Revolutionizer has been suggested as a way to activate abdominal and extraneous (nonabdominal) musculature as effectively as more traditional abdominal exercises, such as the crunch and bent-knee sit-up. The purpose of this study was to test the effectiveness of traditional and nontraditional abdominal exercises in activating abdominal and extraneous musculature. Twenty-one men and women who were healthy and between 23 and 43 years of age were recruited for this study. Surface electromyography (EMG) was used to assess muscle activity from the upper and lower rectus abdominis, external and internal oblique, rectus femoris, latissimus dorsi, and lumbar paraspinal muscles while each exercise was performed. The EMG data were normalized to maximum voluntary muscle contractions. Differences in muscle activity were assessed by a 1-way, repeated-measures analysis of variance. Upper and lower rectus abdominis, internal oblique, and latissimus dorsi muscle EMG activity were highest for the Power Wheel (pike, knee-up, and roll-out), hanging knee-up with straps, and reverse crunch inclined 30 degrees. External oblique muscle EMG activity was highest for the Power Wheel (pike, knee-up, and roll-out) and hanging knee-up with straps. Rectus femoris muscle EMG activity was highest for the Power Wheel (pike and knee-up), reverse crunch inclined 30 degrees, and bent-knee sit-up. Lumbar paraspinal muscle EMG activity was low and similar among exercises. The Power Wheel (pike, knee-up, and roll-out), hanging knee-up with straps, and reverse crunch inclined 30 degrees not only were the most effective exercises in activating abdominal musculature but also were the most effective in activating extraneous musculature. The relatively high rectus femoris muscle activity obtained with the Power Wheel (pike and knee-up), reverse crunch inclined 30 degrees, and bent-knee sit-up may be problematic for some people with low back problems.

Preliminary flight-test results of an advanced technology light twin-engine airplane /ATLIT/

NASA Technical Reports Server (NTRS)

Holmes, B. J.; Kohlman, D. L.; Crane, H. L.

1976-01-01

The present status and flight-test results are presented for the ATLIT airplane. The ATLIT is a Piper PA-34 Seneca I modified by the installation of new wings incorporating the GA(W)-1 (Whitcomb) airfoil, reduced wing area, roll-control spoilers, and full-span Fowler flaps. Flight-test results on stall and spoiler roll characteristics show good agreement with wind-tunnel data. Maximum power-off lift coefficients are greater than 3.0 with flaps deflected 37 deg. With flaps down, spoiler deflections can produce roll helix angles in excess of 0.11 rad. Flight testing is planned to document climb and cruise performance, and supercritical propeller performance and noise characteristics. The airplane is scheduled for testing in the NASA-Langley Research Center Full-Scale Tunnel.

Generalized slow roll in the unified effective field theory of inflation

NASA Astrophysics Data System (ADS)

Motohashi, Hayato; Hu, Wayne

2017-07-01

We provide a compact and unified treatment of power spectrum observables for the effective field theory (EFT) of inflation with the complete set of operators that lead to second-order equations of motion in metric perturbations in both space and time derivatives, including Horndeski and Gleyzes-Langlois-Piazza-Vernizzi theories. We relate the EFT operators in ADM form to the four additional free functions of time in the scalar and tensor equations. Using the generalized slow-roll formalism, we show that each power spectrum can be described by an integral over a single source that is a function of its respective sound horizon. With this correspondence, existing model independent constraints on the source function can be simply reinterpreted in the more general inflationary context. By expanding these sources around an optimized freeze-out epoch, we also provide characterizations of these spectra in terms of five slow-roll hierarchies whose leading-order forms are compact and accurate as long as EFT coefficients vary only on time scales greater than an e -fold. We also clarify the relationship between the unitary gauge observables employed in the EFT and the comoving gauge observables of the postinflationary universe.

Primordial non-Gaussianity and power asymmetry with quantum gravitational effects in loop quantum cosmology

NASA Astrophysics Data System (ADS)

Zhu, Tao; Wang, Anzhong; Kirsten, Klaus; Cleaver, Gerald; Sheng, Qin

2018-02-01

Loop quantum cosmology provides a resolution of the classical big bang singularity in the deep Planck era. The evolution, prior to the usual slow-roll inflation, naturally generates excited states at the onset of the slow-roll inflation. It is expected that these quantum gravitational effects could leave its fingerprints on the primordial perturbation spectrum and non-Gaussianity, and lead to some observational evidences in the cosmic microwave background. While the impact of the quantum effects on the primordial perturbation spectrum has been already studied and constrained by current data, in this paper we continue to study such effects but now on the non-Gaussianity of the primordial curvature perturbations. We present detailed and analytical calculations of the non-Gaussianity and show explicitly that the corrections due to the quantum effects are at the same magnitude of the slow-roll parameters in the observable scales and thus are well within current observational constraints. Despite this, we show that the non-Gaussianity in the squeezed limit can be enhanced at superhorizon scales and it is these effects that can yield a large statistical anisotropy on the power spectrum through the Erickcek-Kamionkowski-Carroll mechanism.

Integration of OLEDs in biomedical sensor systems: design and feasibility analysis

NASA Astrophysics Data System (ADS)

Rai, Pratyush; Kumar, Prashanth S.; Varadan, Vijay K.

2010-04-01

Organic (electronic) Light Emitting Diodes (OLEDs) have been shown to have applications in the field of lighting and flexible display. These devices can also be incorporated in sensors as light source for imaging/fluorescence sensing for miniaturized systems for biomedical applications and low-cost displays for sensor output. The current device capability aligns well with the aforementioned applications as low power diffuse lighting and momentary/push button dynamic display. A top emission OLED design has been proposed that can be incorporated with the sensor and peripheral electrical circuitry, also based on organic electronics. Feasibility analysis is carried out for an integrated optical imaging/sensor system, based on luminosity and spectrum band width. A similar study is also carried out for sensor output display system that functions as a pseudo active OLED matrix. A power model is presented for device power requirements and constraints. The feasibility analysis is also supplemented with the discussion about implementation of ink-jet printing and stamping techniques for possibility of roll to roll manufacturing.

29 CFR 780.816 - Processing of specific commodities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... processing of sugar beets, sugar-beet molasses, sugarcane, or maple sap is within the exemption. Operations...

29 CFR 780.816 - Processing of specific commodities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... processing of sugar beets, sugar-beet molasses, sugarcane, or maple sap is within the exemption. Operations...

29 CFR 780.801 - Statutory provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar..., sugar-beet molasses, sugarcane, or maple sap, into sugar (other than refined sugar) or syrup. Section 13...

29 CFR 780.801 - Statutory provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar..., sugar-beet molasses, sugarcane, or maple sap, into sugar (other than refined sugar) or syrup. Section 13...

29 CFR 780.816 - Processing of specific commodities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... processing of sugar beets, sugar-beet molasses, sugarcane, or maple sap is within the exemption. Operations...

29 CFR 780.801 - Statutory provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar..., sugar-beet molasses, sugarcane, or maple sap, into sugar (other than refined sugar) or syrup. Section 13...

29 CFR 780.801 - Statutory provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar..., sugar-beet molasses, sugarcane, or maple sap, into sugar (other than refined sugar) or syrup. Section 13...

29 CFR 780.816 - Processing of specific commodities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... processing of sugar beets, sugar-beet molasses, sugarcane, or maple sap is within the exemption. Operations...

29 CFR 780.816 - Processing of specific commodities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... processing of sugar beets, sugar-beet molasses, sugarcane, or maple sap is within the exemption. Operations...

29 CFR 780.801 - Statutory provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap into Sugar..., sugar-beet molasses, sugarcane, or maple sap, into sugar (other than refined sugar) or syrup. Section 13...

6. Historic American Buildings Survey E. W. Russell, Photographer, June ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Historic American Buildings Survey E. W. Russell, Photographer, June 19, 1936 OLD WELL SWEEP (LEVER IN OPERATION) - Cotton Gin & Well Sweep, Cliatt Plantation, State Route 165, Cottonton, Russell County, AL

Effect of changes in the nutritional status on the performances of growing Creole kids during an established nematode parasite infection.

PubMed

Ceï, W; Archimède, H; Arquet, R; Félicité, Y; Feuillet, D; Nepos, A; Mulciba, P; Etienne, T; Alexandre, G; Bambou, J C

2017-04-01

In this study, we evaluated the effect of changes in the nutritional status on the performances of growing Creole kids during an established experimental gastrointestinal nematode (GIN) infection. Eighteen 6-month-old Creole kids were distributed in two main groups infected (I) and non-infected (NI) and were placed for a period of 4 weeks on each of three diets differing in their nutritional values: (1) fresh grass (FG, 6.7 MJ/kg dry matter (DM) and 7.9% crude protein (CP)) non-supplemented, (2) FG supplemented with a commercial concentrate (CC, 12.2 MJ/kg DM and 20.6% of CP), and (3) FG supplemented with dried banana (Ban, 11.1 MJ/kg DM and 4.3% CP). The experiment was designed as a split-plot with experimental infection (I and NI) as the main plot and the diets (FG, CC, and Ban) as the subplots with three replicates. We showed a significant effect of the diet changes on the fecal egg counts. A higher dry matter intake, digestibility, and growth rate were observed with the CC diet but together with a slight but significant increase of the intensity of the GIN infection. These data suggest that the improvement of the protein nutritional status during an establish GIN infection would improve the animal performance at the expense of the mechanism involved in the control of the infection.

(1)H-NMR-based metabolomic analysis of the effect of moderate wine consumption on subjects with cardiovascular risk factors.

PubMed

Vázquez-Fresno, Rosa; Llorach, Rafael; Alcaro, Francesca; Rodríguez, Miguel Ángel; Vinaixa, Maria; Chiva-Blanch, Gemma; Estruch, Ramon; Correig, Xavier; Andrés-Lacueva, Cristina

2012-08-01

Moderate wine consumption is associated with health-promoting activities. An H-NMR-based metabolomic approach was used to identify urinary metabolomic differences of moderate wine intake in the setting of a prospective, randomized, crossover, and controlled trial. Sixty-one male volunteers with high cardiovascular risk factors followed three dietary interventions (28 days): dealcoholized red wine (RWD) (272mL/day, polyphenol control), alcoholized red wine (RWA) (272mL/day) and gin (GIN) (100mL/day, alcohol control). After each period, 24-h urine samples were collected and analyzed by (1) H-NMR. According to the results of a one-way ANOVA, significant markers were grouped in four categories: alcohol-related markers (ethanol); gin-related markers; wine-related markers; and gut microbiota markers (hippurate and 4-hydroxphenylacetic acid). Wine metabolites were classified into two groups; first, metabolites of food metabolome: tartrate (RWA and RWD), ethanol, and mannitol (RWA); and second, biomarkers that relates to endogenous modifications after wine consumption, comprising branched-chain amino acid (BCAA) metabolite (3-methyl-oxovalerate). Additionally, a possible interaction between alcohol and gut-related biomarkers has been identified. To our knowledge, this is the first time that this approach has been applied in a nutritional intervention with red wine. The results show the capacity of this approach to obtain a comprehensive metabolome picture including food metabolome and endogenous biomarkers of moderate wine intake. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cdc45 (cell division cycle protein 45) guards the gate of the Eukaryote Replisome helicase stabilizing leading strand engagement

PubMed Central

Petojevic, Tatjana; Pesavento, James J.; Costa, Alessandro; Liang, Jingdan; Wang, Zhijun; Berger, James M.; Botchan, Michael R.

2015-01-01

DNA replication licensing is now understood to be the pathway that leads to the assembly of double hexamers of minichromosome maintenance (Mcm2–7) at origin sites. Cell division control protein 45 (Cdc45) and GINS proteins activate the latent Mcm2–7 helicase by inducing allosteric changes through binding, forming a Cdc45/Mcm2-7/GINS (CMG) complex that is competent to unwind duplex DNA. The CMG has an active gate between subunits Mcm2 and Mcm5 that opens and closes in response to nucleotide binding. The consequences of inappropriate Mcm2/5 gate actuation and the role of a side channel formed between GINS/Cdc45 and the outer edge of the Mcm2–7 ring for unwinding have remained unexplored. Here we uncover a novel function for Cdc45. Cross-linking studies trace the path of the DNA with the CMG complex at a fork junction between duplex and single strands with the bound CMG in an open or closed gate conformation. In the closed state, the lagging strand does not pass through the side channel, but in the open state, the leading strand surprisingly interacts with Cdc45. Mutations in the recombination protein J fold of Cdc45 that ablate this interaction diminish helicase activity. These data indicate that Cdc45 serves as a shield to guard against occasional slippage of the leading strand from the core channel. PMID:25561522

Helicobacter pylori Eradication Prevents Progression of Gastric Cancer in Hypergastrinemic INS-GAS Mice

PubMed Central

Lee, Chung-Wei; Rickman, Barry; Rogers, Arlin B.; Ge, Zhongming; Wang, Timothy C.; Fox, James G.

2009-01-01

Helicobacter pylori infection results in chronic gastritis, which may progress to gastric cancer. In this study, we investigated the efficacy of H. pylori eradication in preventing the progression of gastritis to gastric cancer in H. pylori–infected transgenic INS-GAS mice. H. pylori infection induced severe dysplasia and gastric cancer classified as high-grade and low-grade gastrointestinal intraepithelial neoplasia (GIN) in INS-GAS mice at 28 weeks postinfection (WPI). H. pylori eradication therapy using omeprazole, metronidazole, and clarithromycin was administered p.o. at 8, 12, or 22 WPI. Compared with untreated infected mice, H. pylori eradication at 8, 12, and 22 WPI significantly reduced the severity of dysplasia (P < 0.01). Moreover, H. pylori eradication at 8 WPI completely prevented the development of GIN (P < 0.001). Although not as effective as early antimicrobial treatment, prevention of progression to high-grade GIN was achieved by H. pylori eradication at 12 and 22 WPI (P < 0.05). Consistent with reduced gastric pathology, H. pylori eradication at all time points significantly down-regulated gastric Interferon-γ, tumor necrosis factor-α, inducible nitric oxide synthase, and Reg 1 mRNA levels (P < 0.05) and reduced epithelial proliferation in the corpus (P < 0.01) compared with untreated infected mice. We concluded that H. pylori eradication prevented gastric cancer to the greatest extent when antibiotics are given at an early point of infection, but that eradication therapy given at a later time point delayed the development of severe dysplastic lesions. PMID:18441088

Slip and Dilation Tendency Anlysis of McGinness Hills Geothermal Area

DOE Data Explorer

Faulds, James E.

2013-12-31

Slip and Dilation Tendency in focus areas Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an indication of which faults or fault segments within a geothermal system are critically stressed and therefore likely to transmit geothermal fluids. The slip tendency of a surface is defined by the ratio of shear stress to normal stress on that surface: Ts = τ / σn (Morris et al., 1996). Dilation tendency is defined by the stress acting normal to a given surface: Td = (σ1-σn) / (σ1-σ3) (Ferrill et al., 1999). Slip and dilation were calculated using 3DStress (Southwest Research Institute). Slip and dilation tendency are both unitless ratios of the resolved stresses applied to the fault plane by ambient stress conditions. Values range from a maximum of 1, a fault plane ideally oriented to slip or dilate under ambient stress conditions to zero, a fault plane with no potential to slip or dilate. Slip and dilation tendency values were calculated for each fault in the focus study areas at, McGinness Hills, Neal Hot Springs, Patua, Salt Wells, San Emidio, and Tuscarora on fault traces. As dip is not well constrained or unknown for many faults mapped in within these we made these calculations using the dip for each fault that would yield the maximum slip tendency or dilation tendency. As such, these results should be viewed as maximum tendency of each fault to slip or dilate. The resulting along-fault and fault-to-fault variation in slip or dilation potential is a proxy for along fault and fault-to-fault variation in fluid flow conduit potential. Stress Magnitudes and directions Stress field variation within each focus area was approximated based on regional published data and the world stress database (Hickman et al., 2000; Hickman et al., 1998 Robertson-Tait et al., 2004; Hickman and Davatzes, 2010; Davatzes and Hickman, 2006; Blake and Davatzes 2011; Blake and Davatzes, 2012; Moeck et al., 2010; Moos and Ronne, 2010 and Reinecker et al., 2005) as well as local stress information if applicable. For faults within these focus systems we applied either a normal faulting stress regime where the vertical stress (sv) is larger than the maximum horizontal stress (shmax) which is larger than the minimum horizontal stress (sv>shmax>shmin) or strike-slip faulting stress regime where the maximum horizontal stress (shmax) is larger than the vertical stress (sv) which is larger than the minimum horizontal stress (shmax >sv>shmin) depending on the general tectonic province of the system. Based on visual inspection of the limited stress magnitude data in the Great Basin we used magnitudes such that shmin/shmax = .527 and shmin/sv= .46, which are consistent with complete and partial stress field determinations from Desert Peak, Coso, the Fallon area and Dixie valley (Hickman et al., 2000; Hickman et al., 1998 Robertson-Tait et al., 2004; Hickman and Davatzes, 2011; Davatzes and Hickman, 2006; Blake and Davatzes 2011; Blake and Davatzes, 2012). Slip and dilation tendency for the McGinness Hills geothermal field was calculated based on the faults mapped McGinness Hills area (Siler 2012, unpublished). The McGinness Hills area lies in the Basin and Range Province, as such we applied a normal faulting stress regime to the McGinness area faults, with a minimum horizontal stress direction oriented 115, based on inspection of local and regional stress determinations, as explained above. Under these stress conditions north-northeast striking, steeply dipping fault segments have the highest dilation tendency, while north-northeast striking 60° dipping fault segments have the highest tendency to slip. The McGinness Hills geothermal system is characterized by a left-step in a north-northeast striking west-dipping fault system wit...

Convection patterns in a liquid metal under an imposed horizontal magnetic field.

PubMed

Yanagisawa, Takatoshi; Hamano, Yozo; Miyagoshi, Takehiro; Yamagishi, Yasuko; Tasaka, Yuji; Takeda, Yasushi

2013-12-01

We performed laboratory experiments of Rayleigh-Bénard convection with liquid gallium under various intensities of a uniform imposed horizontal magnetic field. An ultrasonic velocity profiling method was used to visualize the spatiotemporal structure of the flows with simultaneous monitoring of the temperature fluctuations in the liquid gallium layer. The explored Rayleigh numbers Ra range from the critical value for onset of convection to 10(5); the Chandrasekhar number Q covers values up to 1100. A regime diagram of the convection patterns was established in relation to the Ra and Q values for a square vessel with aspect ratio 5. We identified five flow regimes: (I) a fluctuating large-scale pattern without rolls, (II) weakly constrained rolls with fluctuations, (III) a continuous oscillation of rolls, (IV) repeated roll number transitions with random reversals of the flow direction, and (V) steady two-dimensional (2D) rolls. These flow regimes are classified by the Ra/Q values, the ratio of the buoyancy to the Lorentz force. Power spectra from the temperature time series indicate that regimes I and II have the features of developed turbulence, while the other regimes do not. The region of steady 2D rolls (Busse balloon) extends to high Ra values in the present setting by a horizontal magnetic field and regime V is located inside the Busse balloon. Concerning the instabilities of the steady 2D rolls, regime III is the traveling wave convection developed from the oscillatory instability. Regime IV can be regarded as a state of phase turbulence, which is induced by intermittent occurrences of the skewed-varicose instability.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joshi, Vineet V.; Paxton, Dean M.; Lavender, Curt A.

Over the past several years Pacific Northwest National Laboratory (PNNL) has been actively involved in supporting the U.S. Department of Energy National Nuclear Security Administration Office of Material Management and Minimization (formerly Global Threat Reduction Initiative). The U.S. High- Power Research Reactor (USHPRR) project is developing alternatives to existing highly enriched uranium alloy fuel to reduce the proliferation threat. One option for a high-density metal fuel is uranium alloyed with 10 wt% molybdenum (U-10Mo). Forming the U-10Mo fuel plates/foils via rolling is an effective technique and is actively being pursued as part of the baseline manufacturing process. The processing ofmore » these fuel plates requires systematic investigation/understanding of the pre- and post-rolling microstructure, end-state mechanical properties, residual stresses, and defects, their effect on the mill during processing, and eventually, their in-reactor performance. In the work documented herein, studies were conducted to determine the effect of cold and hot rolling the as-cast and homogenized U-10Mo on its microstructure and hardness. The samples were homogenized at 900°C for 48 h, then later annealed for several durations and temperatures to investigate the effect on the material’s microstructure and hardness. The rolling of the as-cast plate, both hot and cold, was observed to form a molybdenum-rich and -lean banded structure. The cold rolling was ineffective, and in some cases exacerbated the as-cast defects. The grains elongated along the rolling direction and formed a pancake shape, while the carbides fractured perpendicularly to the rolling direction and left porosity between fractured particles of UC. The subsequent annealing of these samples at sub-eutectoid temperatures led to rapid precipitation of the ' lamellar phase, mainly in the molybdenum-lean regions. Annealing the samples above the eutectoid temperature did not refine the grain size or the banded microstructure. However, annealing the samples led to quick recovery in hardness as evidenced by a drop in Vickers hardness of 20%. Hot rolling was performed at 650 and 800°C. The hot-rolling mill loads (load separation force) were approximately 40 to 50% less than the cold-rolling for the same reduction and thickness. It was observed that hot rolling the samples with 50% or more reduction in thickness were responsible for dynamic recrystallization in the hot-rolled samples and led to grain refinement. Unlike the cold-rolled samples, the hot-rolled samples did not fracture the carbides and appeared to heal the casting defects. The recovery phenomenon was similar to the cold-rolled samples above the eutectoid temperatures, but owing to the refined grain size, the precipitation of the lamellar phase was far more rapid in these samples and the hardness increased more rapidly than in the cold rolled sample when heated below the eutectoid temperature. The data generated from these rolling efforts has been used to make the process modeling efforts more robust and applicable to all USHPRR partner rolling mills. The flow stress for cold rolling the samples was determined to be between 170-190 ksi, with frictional forces between 0.2 and 0.4 for the PNNL mill. The measured roll separation forces and those simulated using finite element methods for hot and cold rolling for the PNNL rolling mill were in good agreement.« less

Engines-only flight control system

NASA Technical Reports Server (NTRS)

Burcham, Frank W. (Inventor); Gilyard, Glenn B (Inventor); Conley, Joseph L. (Inventor); Stewart, James F. (Inventor); Fullerton, Charles G. (Inventor)

1994-01-01

A backup flight control system for controlling the flightpath of a multi-engine airplane using the main drive engines is introduced. The backup flight control system comprises an input device for generating a control command indicative of a desired flightpath, a feedback sensor for generating a feedback signal indicative of at least one of pitch rate, pitch attitude, roll rate and roll attitude, and a control device for changing the output power of at least one of the main drive engines on each side of the airplane in response to the control command and the feedback signal.

Open inflation in the landscape

NASA Astrophysics Data System (ADS)

Yamauchi, Daisuke; Linde, Andrei; Naruko, Atsushi; Sasaki, Misao; Tanaka, Takahiro

2011-08-01

The open inflation scenario is attracting a renewed interest in the context of the string landscape. Since there are a large number of metastable de Sitter vacua in the string landscape, tunneling transitions to lower metastable vacua through the bubble nucleation occur quite naturally, which leads to a natural realization of open inflation. Although the deviation of Ω0 from unity is small by the observational bound, we argue that the effect of this small deviation on the large-angle CMB anisotropies can be significant for tensor-type perturbation in the open inflation scenario. We consider the situation in which there is a large hierarchy between the energy scale of the quantum tunneling and that of the slow-roll inflation in the nucleated bubble. If the potential just after tunneling is steep enough, a rapid-roll phase appears before the slow-roll inflation. In this case the power spectrum is basically determined by the Hubble rate during the slow-roll inflation. On the other hand, if such a rapid-roll phase is absent, the power spectrum keeps the memory of the high energy density there in the large angular components. Furthermore, the amplitude of large angular components can be enhanced due to the effects of the wall fluctuation mode if the bubble wall tension is small. Therefore, although even the dominant quadrupole component is suppressed by the factor (1-Ω0)2, one can construct some models in which the deviation of Ω0 from unity is large enough to produce measurable effects. We also consider a more general class of models, where the false vacuum decay may occur due to Hawking-Moss tunneling, as well as the models involving more than one scalar field. We discuss scalar perturbations in these models and point out that a large set of such models is already ruled out by observational data, unless there was a very long stage of slow-roll inflation after the tunneling. These results show that observational data allow us to test various assumptions concerning the structure of the string theory potentials and the duration of the last stage of inflation.

Rotary high power transfer apparatus

NASA Technical Reports Server (NTRS)

Jacobson, Peter E. (Inventor); Porter, Ryan S. (Inventor)

1987-01-01

An apparatus for reducing terminal-to-terminal circuit resistance and enhancing heat transfer in a rotary power transfer apparatus of the roll ring type comprising a connecting thimble for attaching an external power cable to a cone shaped terminal which is attached to a tab integral to an outer ring. An inner ring having a spherical recess mates with the spherical end of a tie connector. A cone shaped terminal is fitted to a second connecting thimble for attaching a second external power cable.

Wind-Tunnel Investigation at Low Speed of the Rolling Stability Derivatives of a 1/9-Scale Powered Model of the Convair XFY-1 Vertically Rising Airplane, TED No. NACA DE 373

NASA Technical Reports Server (NTRS)

Queijo, M. J.; Wolhart, Walter D.; Fletcher, H. S.

1953-01-01

An experimental investigation has been conducted in the Langley stability tunnel at low speed to determine the rolling stability derivatives of a 1/9-scale powered model of the Convair XFY-1 vertically rising airplane. Effects of thrust coefficient were investigated for the complete model and for certain components of the model. Effects of control deflections and of propeller blade angle were investigated for the complete model. Most of the tests were made through an angle-of-attack range from about -4deg to 29deg, and the thrust coefficient range was from 0 to 0.7. In order to expedite distribution of these data, no analysis of the data has been prepared for this paper.

A Method to Determine Angular Orientation of a Projectile Using a Polarization Scanning Reference Source

NASA Astrophysics Data System (ADS)

Kankipati, Venkata Varun

This thesis presents a method to determine the angular orientation of a projectile in flight, by mechanically scanning a linearly polarized, microwave reference source. In particular, the research focuses on real time measurement of the roll angle. A 10 GHz, linearly polarized electromagnetic wave is radiated toward the projectile by means of a 10 dB horn antenna. The projectile is equipped with a backward facing 10 dB horn antenna, which has orientation, namely roll angle, sensitivity. The response of the received signal follows a cosine law, producing a maximum when the receiver orientation is aligned with the transmitting polarization. As expected, the peak response shifts in response to the roll-angle, however, unambiguous recovery of the angle requires synchronization with the polarization orientation of the source. This has been achieved through the use of a unique transmitter power sequence, which includes a start-of-scan and end-of-scan time stamp. Based on the above concept, a complete system comprising a polarization scanning reference source, the receiving antenna mounted on a vehicle, and pertinent electronic components, has been tested for both line of sight and non-line of sight applications. The transmitter antenna, mounted on a computer controlled stepper motor allowed source polarization to be scanned from -90° to 90° in 0.3 seconds. The receiving antenna continuously samples the received electromagnetic background at the source frequency and uses a RF detector and a data acquisition system to record the subsequent time-varying voltage signal, which is processed to recover the roll-angle. Measurements in an anechoic chamber were used to confirm the efficacy of the system and field trials, using a transmitter power of 2 W, were successfully demonstrated over a distance of 0.15 miles. The distance limit can be extended by increasing the transmitter power, receiver sensitivity and increase source frequency.

29 CFR 780.800 - Scope and significance of interpretative bulletin.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane..., sugar-beet molasses, sugarcane or maple sap, into sugar (other than refined sugar) or syrup. The limited...

29 CFR 780.800 - Scope and significance of interpretative bulletin.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane..., sugar-beet molasses, sugarcane or maple sap, into sugar (other than refined sugar) or syrup. The limited...

27 CFR 5.27 - Formulas.

Code of Federal Regulations, 2010 CFR

2010-04-01

... attributed to that class or type of distilled spirits; and, in the case of straight whisky, results in the... characteristics generally attributed to whisky, brandy, rum, or gin, and are designated as “Spirits,” preceded or...

27 CFR 5.27 - Formulas.

Code of Federal Regulations, 2011 CFR

2011-04-01

... attributed to that class or type of distilled spirits; and, in the case of straight whisky, results in the... characteristics generally attributed to whisky, brandy, rum, or gin, and are designated as “Spirits,” preceded or...

2. Historic American Buildings Survey E. W. Russell, Photographer, June ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Historic American Buildings Survey E. W. Russell, Photographer, June 19, 1936 CLOSE-UP OF GEAR WHEEL FROM OPPOSITE SIDE - Cotton Gin & Well Sweep, Cliatt Plantation, State Route 165, Cottonton, Russell County, AL

7. Historic American Buildings Survey E. W. Russell, Photographer, June ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Historic American Buildings Survey E. W. Russell, Photographer, June 19, 1936 OLD WELL SWEEP (LEVER IN UPRIGHT POSITION) - Cotton Gin & Well Sweep, Cliatt Plantation, State Route 165, Cottonton, Russell County, AL

5. Historic American Buildings Survey E. W. Russell, Photographer, June ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Historic American Buildings Survey E. W. Russell, Photographer, June 19, 1936 CLOSE-UP OF GEAR SHAFT AND SPOKES - Cotton Gin & Well Sweep, Cliatt Plantation, State Route 165, Cottonton, Russell County, AL

Nonlinear dynamic modeling of surface defects in rolling element bearing systems

NASA Astrophysics Data System (ADS)

Rafsanjani, Ahmad; Abbasion, Saeed; Farshidianfar, Anoushiravan; Moeenfard, Hamid

2009-01-01

In this paper an analytical model is proposed to study the nonlinear dynamic behavior of rolling element bearing systems including surface defects. Various surface defects due to local imperfections on raceways and rolling elements are introduced to the proposed model. The contact force of each rolling element described according to nonlinear Hertzian contact deformation and the effect of internal radial clearance has been taken into account. Mathematical expressions were derived for inner race, outer race and rolling element local defects. To overcome the strong nonlinearity of the governing equations of motion, a modified Newmark time integration technique was used to solve the equations of motion numerically. The results were obtained in the form of time series, frequency responses and phase trajectories. The validity of the proposed model verified by comparison of frequency components of the system response with those obtained from experiments. The classical Floquet theory has been applied to the proposed model to investigate the linear stability of the defective bearing rotor systems as the parameters of the system changes. The peak-to-peak frequency response of the system for each case is obtained and the basic routes to periodic, quasi-periodic and chaotic motions for different internal radial clearances are determined. The current study provides a powerful tool for design and health monitoring of machine systems.

Highly Efficient Simplified Single-Emitting-Layer Hybrid WOLEDs with Low Roll-off and Good Color Stability through Enhanced Förster Energy Transfer.

PubMed

Zhang, Dongdong; Cai, Minghan; Zhang, Yunge; Zhang, Deqiang; Duan, Lian

2015-12-30

Single-emitting layer hybrid white organic light-emitting diodes (SEL-hybrid-WOLEDs) usually suffer from low efficiency, significant roll-off, and poor color stability, attributed to the incomplete energy transfer from the triplet states of the blue fluorophores to the phosphors. Here, we demonstrate highly efficient SEL-hybrid-WOLEDs with low roll-off and good color-stability utilizing blue thermally activated delayed fluorescence (TADF) materials as the host emitters. The triplet states of the blue TADF host emitter can be up-converted into its singlet states, and then the energy is transferred to the complementary phosphors through the long-range Förster energy transfer, enhancing the energy transfer from the host to the dopant. Simplified SEL-hybrid-WOLEDs achieve the highest forward-viewing external quantum efficiency (EQE) of 20.8% and power efficiency of 51.2 lm/W with CIE coordinates of (0.398, 0.456) at a luminance of 500 cd/m(2). The device EQE only slightly drops to 19.6% at a practical luminance of 1000 cd/m(2) with a power efficiency of 38.7 lm/W. Furthermore, the spectra of the device are rather stable with the raising voltage. The reason can be assigned to the enhanced Förster energy transfer, wide charge recombination zone, as well as the bipolar charge transporting ability of the host emitter. We believe that our work may shed light on the future development of highly efficient SEL-hybrid-WOLEDs with simultaneous low roll-off and good color stability.

Influence of standing position on mechanical and energy costs in uphill cycling.

PubMed

Bouillod, Anthony; Pinot, Julien; Valade, Aurélien; Cassirame, Johan; Soto-Romero, Georges; Grappe, Frédéric

2018-04-27

This study was designed to examine the influence of standing position (vs. seated) during uphill cycling on both mechanical cost (MC) and energy cost (EC) in elite cyclists. For the study, thirteen elite cyclists (VO 2max : 71.4 ± 8.0 ml·min -1 ·kg -1 ) performed, in a randomised order, three sets of exercises. Each set comprised 2 min of exercise, alternating every 30 s between seated and standing postures, using different slopes and intensity levels on a motorised treadmill. MC was calculated from the measurement of power output and speed, whereas EC was calculated from the measurement of oxygen consumption and speed. MC was significantly higher (+4.3%, p < 0.001) in standing position compared to seated position when all slopes and intensities were considered. However, EC was not significantly affected by the change in position. The standing position also induced a significant increase in rolling resistance power (p < 0.001), rolling resistance coefficient (p < 0.001) and lateral sways (p < 0.001). The significant increase in MC observed in standing position was due to a higher rolling resistance induced by bicycle sways and a shift forward of the centre of mass compared to seated position. This result should lead bicycle tire manufacturers to reduce the increase in rolling resistance between the two positions. Considering the relationship observed between the MC and bicycle sways, cyclists would be well advised to decrease the bicycle sways in order to reduce the MC of locomotion. Copyright © 2018 Elsevier Ltd. All rights reserved.

Roll-to-roll Slot-die Printed Polymer Solar Cell by Self-Assembly.

PubMed

Yang, Junyu; Lin, Yuanbao; Zheng, Wenhao; Liu, Alei; Cai, Wanzhu; Yu, Xiaomin; Zhang, Fengling; Liang, Quanbin; Wu, Hongbin; Qin, Donghuan; Hou, Lintao

2018-06-12

Extremely simplified one-step roll-to-roll slot-die printed flexible ITO-free polymer solar cells (PSCs) are demonstrated based on ternary blends of electron-donor polymer thieno [3,4-b]thiophene/benzodithiophene (PTB7), electron-acceptor fullerene [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) and electron extracting polymer poly [(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) at room temperature (RT) in ambient air. The flexible ITO-free PSC exhibits a comparable power conversion efficiency (PCE) with the device employing complicated two-step slot-die printing (5.29% vs 5.41%), which indicates that PFN molecules can migrate from the ternary nanocomposite towards Ag cathode via vertical self-assembly during the one-step slot-die printing process in air. To confirm the migration of PFN, the morphology and elemental analysis as well as charge transport of different active layers are investigated with in-situ transient film drying process, transmission electron microscopy, atomic force microscopy, contact angle and surface energy, X-ray photoelectron spectroscopy, scanning electron microscope, impedance spectroscopy, transient photovoltage and transient photocurrent as well as laser beam induced current. Moreover, the good air and mechanical stability of the flexible device with a decent PCE achieved in 1 cm2 PSCs at RT in air suggests the feasibility of energy-saving and time-saving one-step slot-die printing to large-scale roll-to-roll manufacture in the future.

Extremely Low Roll-Off and High Efficiency Achieved by Strategic Exciton Management in Organic Light-Emitting Diodes with Simple Ultrathin Emitting Layer Structure.

PubMed

Zhang, Tianmu; Shi, Changsheng; Zhao, Chenyang; Wu, Zhongbin; Chen, Jiangshan; Xie, Zhiyuan; Ma, Dongge

2018-03-07

Phosphorescent organic light-emitting diodes (OLEDs) possess the property of high efficiency but have serious efficiency roll-off at high luminance. Herein, we manufactured high-efficiency phosphorescent OLEDs with extremely low roll-off by effectively locating the ultrathin emitting layer (UEML) away from the high-concentration exciton formation region. The strategic exciton management in this simple UEML architecture greatly suppressed the exciton annihilation due to the expansion of the exciton diffusion region; thus, this efficiency roll-off at high luminance was significantly improved. The resulting green phosphorescent OLEDs exhibited the maximum external quantum efficiency of 25.5%, current efficiency of 98.0 cd A -1 , and power efficiency of 85.4 lm W -1 and still had 25.1%, 94.9 cd A -1 , and 55.5 lm W -1 at 5000 cd m -2 luminance, and retained 24.3%, 92.7 cd A -1 , and 49.3 lm W -1 at 10 000 cd m -2 luminance, respectively. Compared with the usual structures, the improvement demonstrated in this work displays potential value in applications.

Roll-To-Roll Printing of Meter-Scale Composite Transparent Electrodes with Optimized Mechanical and Optical Properties for Photoelectronics.

PubMed

Meng, Xiangchuan; Hu, Xiaotian; Yang, Xia; Yin, Jingping; Wang, Qingxia; Huang, Liqiang; Yu, Zoukangning; Hu, Ting; Tan, Licheng; Zhou, Weihua; Chen, Yiwang

2018-03-14

Flexible transparent electrodes are an indispensable component for flexible optoelectronic devices. In this work, the meter-scale composite transparent electrodes (CTEs) composed of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and Ag grid/polyethylene terephthalate (PET) with optimized mechanical and optical properties are demonstrated by slot-die roll-to-roll technique with solution printing method under a low cost ($15-20 per square meter), via control of the viscosity and surface energy of PEDOT:PSS ink as well as the printing parameters. The CTEs show excellent flexibility remaining 98% of the pristine value after bending 2000 times under various bending situations, and the square resistance ( R s ) of CTEs can be reduced to 4.5-5.0 Ω/sq with an appropriate transmittance. Moreover, the optical performances, such as haze, extinction coefficient, and refractive index, are investigated, as compared with indium tin oxide/PET, which are potential for the inexpensive optoelectronic flexible devices. The CTEs could be successfully employed in polymer solar cells with different areas, showing a maximal power conversion efficiency of 8.08%.

The influence of tyre characteristics on measures of rolling performance during cross-country mountain biking.

PubMed

Macdermid, Paul William; Fink, Philip W; Stannard, Stephen R

2015-01-01

This investigation sets out to assess the effect of five different models of mountain bike tyre on rolling performance over hard-pack mud. Independent characteristics included total weight, volume, tread surface area and tread depth. One male cyclist performed multiple (30) trials of a deceleration field test to assess reliability. Further tests performed on a separate occasion included multiple (15) trials of the deceleration test and six fixed power output hill climb tests for each tyre. The deceleration test proved to be reliable as a means of assessing rolling performance via differences in initial and final speed (coefficient of variation (CV) = 4.52%). Overall differences between tyre performance for both deceleration test (P = 0.014) and hill climb (P = 0.032) were found, enabling significant (P < 0.0001 and P = 0.049) models to be generated, allowing tyre performance prediction based on tyre characteristics. The ideal tyre for rolling and climbing performance on hard-pack surfaces would be to decrease tyre weight by way of reductions in tread surface area and tread depth while keeping volume high.

Power suppression at large scales in string inflation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cicoli, Michele; Downes, Sean; Dutta, Bhaskar, E-mail: mcicoli@ictp.it, E-mail: sddownes@physics.tamu.edu, E-mail: dutta@physics.tamu.edu

2013-12-01

We study a possible origin of the anomalous suppression of the power spectrum at large angular scales in the cosmic microwave background within the framework of explicit string inflationary models where inflation is driven by a closed string modulus parameterizing the size of the extra dimensions. In this class of models the apparent power loss at large scales is caused by the background dynamics which involves a sharp transition from a fast-roll power law phase to a period of Starobinsky-like slow-roll inflation. An interesting feature of this class of string inflationary models is that the number of e-foldings of inflationmore » is inversely proportional to the string coupling to a positive power. Therefore once the string coupling is tuned to small values in order to trust string perturbation theory, enough e-foldings of inflation are automatically obtained without the need of extra tuning. Moreover, in the less tuned cases the sharp transition responsible for the power loss takes place just before the last 50-60 e-foldings of inflation. We illustrate these general claims in the case of Fibre Inflation where we study the strength of this transition in terms of the attractor dynamics, finding that it induces a pivot from a blue to a redshifted power spectrum which can explain the apparent large scale power loss. We compute the effects of this pivot for example cases and demonstrate how magnitude and duration of this effect depend on model parameters.« less

Power suppression at large scales in string inflation

NASA Astrophysics Data System (ADS)

Cicoli, Michele; Downes, Sean; Dutta, Bhaskar

2013-12-01

We study a possible origin of the anomalous suppression of the power spectrum at large angular scales in the cosmic microwave background within the framework of explicit string inflationary models where inflation is driven by a closed string modulus parameterizing the size of the extra dimensions. In this class of models the apparent power loss at large scales is caused by the background dynamics which involves a sharp transition from a fast-roll power law phase to a period of Starobinsky-like slow-roll inflation. An interesting feature of this class of string inflationary models is that the number of e-foldings of inflation is inversely proportional to the string coupling to a positive power. Therefore once the string coupling is tuned to small values in order to trust string perturbation theory, enough e-foldings of inflation are automatically obtained without the need of extra tuning. Moreover, in the less tuned cases the sharp transition responsible for the power loss takes place just before the last 50-60 e-foldings of inflation. We illustrate these general claims in the case of Fibre Inflation where we study the strength of this transition in terms of the attractor dynamics, finding that it induces a pivot from a blue to a redshifted power spectrum which can explain the apparent large scale power loss. We compute the effects of this pivot for example cases and demonstrate how magnitude and duration of this effect depend on model parameters.

29 CFR 780.818 - Employees not engaged in processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... called the “boarding house”). (c) Hauling raw sugar or molasses away from the mill. (d) Any work outside...

29 CFR 780.818 - Employees not engaged in processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... called the “boarding house”). (c) Hauling raw sugar or molasses away from the mill. (d) Any work outside...

Search for single production of vector-like top partner decaying to Wb at eγ collision

NASA Astrophysics Data System (ADS)

Yang, Bingfang; Shao, Hongbo; Han, Jinzhong

2018-03-01

In a simplified model including an SU(2) singlet T quark with charge 2/3, we investigate the single vector-like T production at the high energy eγ collision. We study the observability of the vector-like T focusing on the T→ Wb decay channel with W→ l\\bar{ν } at √{s}=2.0 TeV. In this analysis, only two free parameters are involved, namely the T quark coupling strength for single production g^{*} and the mass mT. We scan the parameter space and find that the correlation region of g^{*}\\in [0.24, 0.5] and mT\\in [800, 1360] GeV can be excluded with integrated luminosity L=100 fb^{-1} and the correlation region of g^{*}\\in [0.13, 0.5] and mT\\in [800, 1620] GeV can be excluded with integrated luminosity L=1000 fb^{-1} at 2σ level.

Rocking and Rolling: Supporting Infants, Toddlers, and Their Families. Stories--Their Powerful Role in Early Language and Literacy

ERIC Educational Resources Information Center

Im, Janice; Parlakian, Rebecca; Osborn, Carol

2007-01-01

Storytelling is perhaps the most powerful way that human beings organize experience. The practice is timeless and universal. Stories help everyone understand the world and make sense of their lives. Like adults, children use stories to process and reflect on their experiences. Recognizing and responding to the stories that infants and toddlers…

Glucose Elevates NITRATE TRANSPORTER2.1 Protein Levels and Nitrate Transport Activity Independently of Its HEXOKINASE1-Mediated Stimulation of NITRATE TRANSPORTER2.1 Expression1[W][OPEN

PubMed Central

de Jong, Femke; Thodey, Kate; Lejay, Laurence V.; Bevan, Michael W.

2014-01-01

Mineral nutrient uptake and assimilation is closely coordinated with the production of photosynthate to supply nutrients for growth. In Arabidopsis (Arabidopsis thaliana), nitrate uptake from the soil is mediated by genes encoding high- and low-affinity transporters that are transcriptionally regulated by both nitrate and photosynthate availability. In this study, we have studied the interactions of nitrate and glucose (Glc) on gene expression, nitrate transport, and growth using glucose-insensitive2-1 (gin2-1), which is defective in sugar responses. We confirm and extend previous work by showing that HEXOKINASE1-mediated oxidative pentose phosphate pathway (OPPP) metabolism is required for Glc-mediated NITRATE TRANSPORTER2.1 (NRT2.1) expression. Treatment with pyruvate and shikimate, two products derived from intermediates of the OPPP that are destined for amino acid production, restores wild-type levels of NRT2.1 expression, suggesting that metabolites derived from OPPP metabolism can, together with Glc, directly stimulate high levels of NRT2.1 expression. Nitrate-mediated NRT2.1 expression is not influenced by gin2-1, showing that Glc does not influence NRT2.1 expression through nitrate-mediated mechanisms. We also show that Glc stimulates NRT2.1 protein levels and transport activity independently of its HEXOKINASE1-mediated stimulation of NRT2.1 expression, demonstrating another possible posttranscriptional mechanism influencing nitrate uptake. In gin2-1 plants, nitrate-responsive biomass growth was strongly reduced, showing that the supply of OPPP metabolites is essential for assimilating nitrate for growth. PMID:24272701

Decline in faecal worm egg counts in lambs suckling ewes treated with lipophilic anthelmintics: implications for hastening development of anthelmintic resistance.

PubMed

Dever, M L; Kahn, L P

2015-04-30

The aim for this experiment was to look for evidence of milk transfer of anthelmintic actives from ewes to their suckling lambs by reference to lambs' faecal worm egg count (WEC). The hypothesis was that WEC will decline in lambs suckling ewes treated with anthelmintics known to be lipophilic. One group of lactating Border Leicester×Merino ewes were treated (TX) with a combination of short (2.5mg/kg monepantel) and long-acting (1mg/kg moxidectin long-acting injection and a sustained release of 4.62g albendazole over 100 days) anthelmintics to remove gastrointestinal nematode (GIN) burden on day 0. The other group of lactating ewes (UTX) and all lambs (White Suffolk sires) were not treated. Ewes and lambs grazed as a single group and were exposed to GIN (predominately Haemonchus contortus) infection from pasture. Measurements were taken on days 0 and 7. WEC of lambs suckling UTX ewes increased from 6441 to 10,341 eggs per gram (epg) between days 0 and 7, while there was a 51% reduction in WEC for lambs suckling TX ewes. Packed cell volume (PCV) was significantly higher for lambs suckling TX ewes on day 7 compared to lambs suckling UTX ewes (28.5% vs. 24.9%, p=0.039). These results suggest that lambs suckling ewes treated with lipophilic anthelmintics received a sub-therapeutic dose via milk which would increase selection within the GIN (H. contortus) population for anthelmintic resistance. Copyright © 2015 Elsevier B.V. All rights reserved.

Risk factors for under-diagnosis of gastric intraepithelial neoplasia and early gastric carcinoma in endoscopic forceps biopsy in comparison with endoscopic submucosal dissection in Chinese patients.

PubMed

Xu, Guifang; Zhang, Weijie; Lv, Ying; Zhang, Bin; Sun, Qi; Ling, Tingsheng; Zhang, Xiaoqi; Zhou, Zhihua; Wang, Lei; Huang, Qin; Zou, Xiaoping

2016-07-01

Differences in pathologic diagnosis between endoscopic forceps biopsy (EFB) and endoscopic submucosal dissection (ESD) for gastric intraepithelial neoplasia (GIN) and early gastric carcinoma (EGC) in Chinese patients remain unknown. The aim of the study was to investigate risk factors for under-diagnosed pathology in initial EFB, compared to final ESD. We reviewed endoscopic and histopathologic findings for tumor location, size, macroscopic pattern, nodularity, erythema, erosion, GIN (low and high grade), and EGC diagnosed with the WHO criteria. Differences in those features between EFB and ESD were compared and risk factors for under-diagnosis by EFB were analyzed. Although concordant in most (74.9 %) cases between EFBs and ESDs, pathological diagnoses in 57 (25.1 %) cases were upgraded in ESDs. Compared to the concordant group, the lesion size ≥2 cm, and depressed and excavated patterns were significantly more frequent in the upgraded group. Further multivariate regression analysis demonstrated the depressed pattern and lesion size ≥2 cm as independent risk factors for upgraded pathology with the odds ratio of 5.778 (95 % confidence interval 2.893-11.542) and 2.535 (95 % confidence interval 1.257-5.111), respectively. Lesion size ≥2.0 cm and the depressed pattern at initial EFB were independent risk factors for pathologic upgrade to advanced diseases in ESD. Therefore, these endoscopic characteristics should be considered together with the initial EFB diagnosis to guide the optimal clinical management of patients with GIN and EGC.

Effect of conductive hearing loss on central auditory function.

PubMed

Bayat, Arash; Farhadi, Mohammad; Emamdjomeh, Hesam; Saki, Nader; Mirmomeni, Golshan; Rahim, Fakher

It has been demonstrated that long-term Conductive Hearing Loss (CHL) may influence the precise detection of the temporal features of acoustic signals or Auditory Temporal Processing (ATP). It can be argued that ATP may be the underlying component of many central auditory processing capabilities such as speech comprehension or sound localization. Little is known about the consequences of CHL on temporal aspects of central auditory processing. This study was designed to assess auditory temporal processing ability in individuals with chronic CHL. During this analytical cross-sectional study, 52 patients with mild to moderate chronic CHL and 52 normal-hearing listeners (control), aged between 18 and 45 year-old, were recruited. In order to evaluate auditory temporal processing, the Gaps-in-Noise (GIN) test was used. The results obtained for each ear were analyzed based on the gap perception threshold and the percentage of correct responses. The average of GIN thresholds was significantly smaller for the control group than for the CHL group for both ears (right: p=0.004; left: p<0.001). Individuals with CHL had significantly lower correct responses than individuals with normal hearing for both sides (p<0.001). No correlation was found between GIN performance and degree of hearing loss in either group (p>0.05). The results suggest reduced auditory temporal processing ability in adults with CHL compared to normal hearing subjects. Therefore, developing a clinical protocol to evaluate auditory temporal processing in this population is recommended. Copyright © 2017 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

How well can future CMB missions constrain cosmic inflation?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, Jérôme; Vennin, Vincent; Ringeval, Christophe, E-mail: jmartin@iap.fr, E-mail: christophe.ringeval@uclouvain.be, E-mail: vennin@iap.fr

2014-10-01

We study how the next generation of Cosmic Microwave Background (CMB) measurement missions (such as EPIC, LiteBIRD, PRISM and COrE) will be able to constrain the inflationary landscape in the hardest to disambiguate situation in which inflation is simply described by single-field slow-roll scenarios. Considering the proposed PRISM and LiteBIRD satellite designs, we simulate mock data corresponding to five different fiducial models having values of the tensor-to-scalar ratio ranging from 10{sup -1} down to 10{sup -7}. We then compute the Bayesian evidences and complexities of all Encyclopædia Inflationaris models in order to assess the constraining power of PRISM alone andmore » LiteBIRD complemented with the Planck 2013 data. Within slow-roll inflation, both designs have comparable constraining power and can rule out about three quarters of the inflationary scenarios, compared to one third for Planck 2013 data alone. However, we also show that PRISM can constrain the scalar running and has the capability to detect a violation of slow roll at second order. Finally, our results suggest that describing an inflationary model by its potential shape only, without specifying a reheating temperature, will no longer be possible given the accuracy level reached by the future CMB missions.« less

Magnetostrictive clad steel plates for high-performance vibration energy harvesting

NASA Astrophysics Data System (ADS)

Yang, Zhenjun; Nakajima, Kenya; Onodera, Ryuichi; Tayama, Tsuyoki; Chiba, Daiki; Narita, Fumio

2018-02-01

Energy harvesting technology is becoming increasingly important with the appearance of the Internet of things. In this study, a magnetostrictive clad steel plate for harvesting vibration energy was proposed. It comprises a cold-rolled FeCo alloy and cold-rolled steel joined together by thermal diffusion bonding. The performances of the magnetostrictive FeCo clad steel plate and conventional FeCo plate cantilevers were compared under bending vibration; the results indicated that the clad steel plate construct exhibits high voltage and power output compared to a single-plate construct. Finite element analysis of the cantilevers under bending provided insights into the magnetic features of a clad steel plate, which is crucial for its high performance. For comparison, the experimental results of a commercial piezoelectric bimorph cantilever were also reported. In addition, the cold-rolled FeCo and Ni alloys were joined by thermal diffusion bonding, which exhibited outstanding energy harvesting performance. The larger the plate volume, the more the energy generated. The results of this study indicated not only a promising application for the magnetostrictive FeCo clad steel plate as an efficient energy harvester, related to small vibrations, but also the notable feasibility for the formation of integrated units to support high-power trains, automobiles, and electric vehicles.

Roll splitting as an alternative intermediate process for wood fuel

Treesearch

Paul E. Barnett; Donald L. Sirois

1985-01-01

In an effort to develop mobile equipment for harvesting and processing woody biomass from power line rights-of-way and precommerial thinnings, numerous alternative concepts were evaluated by Tennessee Valley Authority's Timber Harvesting Project.

Aerodynamic interactions from reaction controls for lateral control of the M2-F2 lifting-body entry configuration at transonic and supersonic and supersonic Mach numbers. [wind tunnel tests

NASA Technical Reports Server (NTRS)

Bailey, R. O.; Brownson, J. J.

1979-01-01

Tests were conducted in the Ames 6 by 6 foot wind tunnel to determine the interaction of reaction jets for roll control on the M2-F2 lifting-body entry vehicle. Moment interactions are presented for a Mach number range of 0.6 to 1.7, a Reynolds number range of 1.2 x 10 to the 6th power to 1.6 x 10 to the 6th power (based on model reference length), an angle-of-attack range of -9 deg to 20 deg, and an angle-of-sideslip range of -6 deg to 6 deg at an angle of attack of 6 deg. The reaction jets produce roll control with small adverse yawing moment, which can be offset by horizontal thrust component of canted jets.

Cosmological perturbations and noncommutative tachyon inflation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu Daojun; Li Xinzhou

2004-12-15

The motivation for studying the rolling tachyon and noncommutative inflation comes from string theory. In the tachyon inflation scenario, metric perturbations are created by tachyon field fluctuations during inflation. We drive the exact mode equation for scalar perturbations of the metric and investigate the cosmological perturbations in the commutative and noncommutative inflationary spacetime driven by the tachyon field which have a Born-Infeld Lagrangian. Although at lowest order the predictions of tachyon inflation are no different than those from standard slow-roll inflation, due to the modified inflationary dynamics there exists modifications to the power spectra of fluctuations generated during inflation. Inmore » the noncommutative tachyon inflation scenario, the stringy noncommutativity of spacetime results in corrections to the primordial power spectrum that lead to a spectral index that is greater than 1 on large scales and less than 1 on small scales as the first-year results of the Wilkinson Microwave Anisotropy Probe indicate.« less

Precision engineering for future propulsion and power systems: a perspective from Rolls-Royce.

PubMed

Beale, Sam

2012-08-28

Rolls-Royce today is an increasingly global business, supplying integrated power systems to a wide variety of customers for use on land, at sea and in the air. Its reputation for 'delivering excellence' to these customers has been built largely on its gas turbine technology portfolio, and this reputation relies on the quality of the company's expertise in design, manufacture and delivery of services. This paper sets out to examine a number of examples, such as the high-pressure turbine blade, of the company's reliance on precision design and manufacture, highlighting how this precision contributes to customer satisfaction with its products. A number of measures the company is taking to accelerate its competitiveness in precision manufacture are highlighted, not least its extensive relationships with the academic research base. The paper finishes by looking briefly at the demands of the company's potential future product portfolio.

Stability and control of the Gossamer human powered aircraft by analysis and flight test

NASA Technical Reports Server (NTRS)

Jex, H. R.; Mitchell, D. G.

1982-01-01

The slow flight speed, very light wing loading, and neutral stability of the Gossamer Condor and the Gossamer Albatross emphasized apparent-mass aerodynamic effects and unusual modes of motion response. These are analyzed, approximated, and discussed, and the resulting transfer functions and dynamic properties are summarized and compared. To verify these analytical models, flight tests were conducted with and electrically powered Gossamer Albatross II. Sensors were installed and their outputs were telemetered to records on the ground. Frequency sweeps of the various controls were made and the data were reduced to frequency domain measures. Results are given for the response of: pitch rate, airspeed and normal acceleration from canard-elevator deflection; roll rate and yaw rate from canard-rudder tilt; and roll rate and yaw rate from wing warp. The reliable data are compared with the analytical predictions.

Cyclone performance by velocity

USDA-ARS?s Scientific Manuscript database

Cyclones are used almost exclusively in the US cotton ginning industry for emission abatement on pneumatic conveying system exhausts because of their high efficiency, and low capital and operating cost.. Cyclone performance is improved by increasing collection effectiveness or decreasing energy cons...

40 CFR 180.598 - Novaluron; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Cattle, meat 0.60 Cattle, meat byproducts, except kidney and liver 11 Cherry 8.0 Cocona 1.0 Corn, sweet, forage 16 Corn, sweet, kernel plus cob with husks removed 0.05 Corn, sweet, stover 50 Cotton, gin...

40 CFR 180.475 - Difenoconazole; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Canola, seed 0.01 Citrus, dried pulp 2.0 Citrus, oil 25 Corn, sweet, forage 0.01 Corn, sweet, kernel plus cob with husks removed 0.01 Corn, sweet, stover 0.01 Cotton, gin byproducts 0.05 Cotton, undelinted...

7 CFR 1205.312 - Handle.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.312 Handle. Handle means to harvest, gin, warehouse, compress, purchase, market, transport, or otherwise acquire ownership or control of cotton. [31 FR 16758...

40 CFR 180.477 - Flumiclorac pentyl; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... million Corn, field, forage 0.01 Corn, field, grain 0.01 Corn, field, stover 0.01 Cotton, gin byproducts 3.0 Cotton, undelinted seed 0.2 Soybean, hulls 0.02 Soybean, seed 0.01 (b) Section 18 emergency...

7 CFR 1205.500 - Terms defined.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton... administrative body established pursuant to the Cotton Research and Promotion Order. (c) CCC means the Commodity... research and promotion assessment, picking charges, ginning charges, warehouse receiving charges, warehouse...

7 CFR 1205.500 - Terms defined.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton... administrative body established pursuant to the Cotton Research and Promotion Order. (c) CCC means the Commodity... research and promotion assessment, picking charges, ginning charges, warehouse receiving charges, warehouse...

40 CFR 180.433 - Fomesafen; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... application of its sodium salt in or on the following commodities: Commodity Parts per million Bean, dry 0.05 Bean, snap, succulent 0.05 Cotton, gin byproducts 0.025 Cotton, undelinted seed 0.025 Soybean 0.05 (b...

78 FR 67209 - Self-Regulatory Organizations; NYSE MKT LLC; Notice of Withdrawal of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

..., LLC, dated August 2, 2013. \\5\\ See letter to Elizabeth M. Murphy, Secretary, Commission, from Janet.... Murphy, Secretary, Commission, from Janet McGinness, EVP and Corporate Secretary, General Counsel, NYSE...

40 CFR 180.675 - Tolfenpyrad; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Parts per million Almond hulls 6.0 Citrus, dried pulp 8.0 Citrus, oil 70.0 Cotton, gin byproducts 15.0... Tea 30.0 Vegetable, leafy, except Brassica, group 4 30.0 (2) Tolerances are established for residues...

Northwest passage: Trade route for large air cushion vehicles

NASA Technical Reports Server (NTRS)

Anderson, J. L.

1973-01-01

A conceptual vehicle and powerplant (10,000-ton) nuclear-powered air-cushion vehicle (ACV) that could open the Northwest Passage and other Arctic passages to commercial traffic is identified. The report contains a description of the conceptual vehicle, including the powerplant and operations, an assessment of technical feasibility, estimates of capital and operating costs, and identification of eligible cargo and markets. A comparison of the nuclear ACV freighter with nuclear container ships shows that for containerized or roll-on/roll-off cargo the ACV would provide greatly reduced transit time between North Atlantic and North Pacific ports at a competitive cost.

Explaining variability in first grazing season heifer growth combining individually measured parasitological and clinical indicators with exposure to gastrointestinal nematode infection based on grazing management practice.

PubMed

Merlin, Aurélie; Chauvin, Alain; Madouasse, Aurélien; Froger, Sébastien; Bareille, Nathalie; Chartier, Christophe

2016-07-30

The objective of our study was to explain the variability of average daily weight gain (ADWG) due to gastrointestinal nematode (GIN) infection for 291 non treated first grazing season (FGS) heifers, from 12 independent groups in the western part of France, by combining parasitological and clinical indicators at individual level and grazing management indicators at group level. Parasitological indicators were faecal egg count (FEC), anti Ostertagia ostertagi antibody level (Ostertagia ODR), and pepsinogen level. Clinical indicators were diarrhea score (DISCO) and breech soiling score (BSS). At group level, grazing management practice (GMP), based on three variables (supplementation, month of turnout, grazing season duration), was clustered into three categories reflecting low, medium or high exposure (EXP) to GIN. Depending on the groups, turnout was from mid-March to early July and housing was from mid-October to late November, with a FGS duration ranging from 4 to 8.4 months. At turnout, the mean age of heifers was 8 months (range: 6-16 months) and they weighed between 175 and 268kg. In each GMP category, FEC significantly decreased between the mid-season and the housing, while Ostertagia ODR and pepsinogen level increased gradually throughout the grazing season. In contrast, clinical indicators did not show any seasonal variation. In a multivariate linear model, 22% of the ADWG variability was significantly explained by two individual indicators (Ostertagia ODR: 12.6%, DISCO: 4.8%) and by the group indicator (GMP category: 4.8%). ADWG losses due to GIN exposure (Ostertagia ODR) were estimated up to 39kg per heifer for the overall grazing season. For groups within the low EXP category the difference between animals with low (<697g/day) or high (>697g/day) ADWG was explained by the clinical indicator DISCO. In contrast, for groups within the medium and high EXP categories this difference was explained by a parasitological indicator (Ostertagia ODR). This study highlighted the value of combining both grazing management (group level) and parasitological (individual level) indicators to assess the impact of GIN on ADWG of FGS heifers. As a result, this combination might allow a better discrimination of animals or groups that may be in need of treatment in a targeting selective treatment approach. Copyright © 2016 Elsevier B.V. All rights reserved.

The Mysterious Rescue of adg1-1/tpt-2 – an Arabidopsis thaliana Double Mutant Impaired in Acclimation to High Light – by Exogenously Supplied Sugars

PubMed Central

Heinrichs, Luisa; Schmitz, Jessica; Flügge, Ulf-Ingo; Häusler, Rainer E.

2012-01-01

An Arabidopsis thaliana double mutant (adg1-1/tpt-2) defective in the day- and night-path of photoassimilate export from the chloroplast due to a knockout in the triose phosphate/phosphate translocator (TPT; tpt-2) and a lack of starch [mutation in ADP glucose pyrophosphorylase (AGPase); adg1-1] exhibits severe growth retardation, a decrease in the photosynthetic capacity, and a high chlorophyll fluorescence (HCF) phenotype under high light conditions. These phenotypes could be rescued when the plants were grown on sucrose (Suc) or glucose (Glc). Here we address the question whether Glc-sensing hexokinase1 (HXK1) defective in the Glc insensitive 2 (gin2-1) mutant is involved in the sugar-dependent rescue of adg1-1/tpt-2. Triple mutants defective in the TPT, AGPase, and HXK1 (adg1-1/tpt-2/gin2-1) were established as homozygous lines and grown together with Col-0 and Landsberg erecta (Ler) wild-type plants, gin2-1, the adg1-1/tpt-2 double mutant, and the adg1-1/tpt-2/gpt2-1 triple mutant [additionally defective in the glucose 6-phosphate/phosphate translocator 2 (GPT2)] on agar in the presence or absence of 50 mM of each Glc, Suc, or fructose (Fru). The growth phenotype of the double mutant and both triple mutants could be rescued to a similar extent only by Glc and Suc, but not by Fru. All three sugars were capable of rescuing the HCF and photosynthesis phenotype, irrespectively of the presence or absence of HXK1. Quantitative RT-PCR analyses of sugar-responsive genes revealed that plastidial HXK (pHXK) was up-regulated in adg1-1/tpt-2 plants grown on sugars, but showed no response in adg1-1/tpt-2/gin2-1. It appears likely that soluble sugars are directly taken up by the chloroplasts and enter further metabolism, which consumes ATP and NADPH from the photosynthetic light reaction and thereby rescues the photosynthesis phenotype of the double mutant. The implication of sugar turnover and probably signaling inside the chloroplasts for the concept of retrograde signaling is discussed. PMID:23233856

Field evaluation of the efficacy of common anthelmintics used in the control of gastrointestinal nematodes of sheep in Dabat district, Northwest Ethiopia.

PubMed

Seyoum, Zewdu; Demessie, Yitayew; Bogale, Basazinew; Melaku, Achenef

2017-01-01

Gastrointestinal nematode (GIN) infections are the main impediments that restrict the welfare and productivity of small ruminant in the world. Effective management of GINs in grazing sheep relies heavily on the use of highly efficacious anthelmintic drugs. However, anthelmintic resistance is becoming a significant concern in the world, and this phenomenon severely threatens the potential utilisation of this control strategy. Therefore, this study was conducted 1) to evaluate the efficacy of commonly used anthelmintic on GINs in naturally infected sheep and 2) to assess the farmers' perception on anthelmintics utilisation practices in Dabat district, Northwest Ethiopia. One hundred twenty nematode infected sheep were used in this study. Sheep were selected based on the egg count (≥150 eggs per gram of faeces). The animals were allocated randomly into four groups (30 animals per group). Group-I, II and III were treated with Albendazole, Tetramisole, and Ivermectin, respectively. The 4th group was left untreated (as control). Faecal samples were collected on day 0 (before treatment), on day 3, 7, 10 and 14 (post-treatment). The modified McMaster technique was used for quantifying the eggs. Faecal egg count reduction test (FECRT) was applied to determine the efficacy of anthelmintic at day 14 (post-treatment). In addition, a questionnaire survey was conducted on 100 randomly selected sheep owners. All anthelmintics tested revealed significant ( P  < 0.05) reduction in nematode egg excretion in the sheep post-treatment. Faecal egg count reduction (FECR) levels for Albendazole, Tetramisole, and Ivermectin were 97.2, 98.9 and 97.7%, respectively. Post-treatment egg counts and percentage reduction of egg counts were not significantly different ( P  > 0.05) among the treatment groups. The nematode genera identified before treatment were Haemonchus , Trichostrongylus , Cooperia , Trichuris , Teladorsagia , Bunostomum, and Strongyloides. Haemonchus and Trichostrongylus were detected after treatment with Albendazole and Ivermectin. The questionnaire survey revealed that Albendazole was the most commonly (90%) used anthelmintic to treat nematodes in sheep, followed by Tetramisole (36%) and Tetraclozan (Tetramisole-Oxyclozanide combination) (20%). Respondents expressed that anthelmintic selection was made based on veterinarian prescription (84%), colour (27%), efficacy (4%), price affordability (1%) and availability (1%). This study demonstrated that the tested anthelmintics had an acceptable level of efficacy against GINs of sheep.

From non-trivial geometries to power spectra and vice versa

NASA Astrophysics Data System (ADS)

Brooker, D. J.; Tsamis, N. C.; Woodard, R. P.

2018-04-01

We review a recent formalism which derives the functional forms of the primordial—tensor and scalar—power spectra of scalar potential inflationary models. The formalism incorporates the case of geometries with non-constant first slow-roll parameter. Analytic expressions for the power spectra are given that explicitly display the dependence on the geometric properties of the background. Moreover, we present the full algorithm for using our formalism, to reconstruct the model from the observed power spectra. Our techniques are applied to models possessing "features" in their potential with excellent agreement.

Wirelessly powered microfluidic dielectrophoresis devices using printable RF circuits.

PubMed

Qiao, Wen; Cho, Gyoujin; Lo, Yu-Hwa

2011-03-21

We report the first microfluidic device integrated with a printed RF circuit so the device can be wirelessly powered by a commercially available RFID reader. For conventional dielectrophoresis devices, electrical wires are needed to connect the electric components on the microchip to external equipment such as power supplies, amplifiers, function generators, etc. Such a procedure is unfamiliar to most clinicians and pathologists who are used to working with a microscope for examination of samples on microscope slides. The wirelessly powered device reported here eliminates the entire need for wire attachments and external instruments so the operators can use the device in essentially the same manner as they do with microscope slides. The integrated circuit can be fabricated on a flexible plastic substrate at very low cost using a roll-to-roll printing method. Electrical power at 13.56 MHz transmitted by a radio-frequency identification (RFID) reader is inductively coupled to the printed RFIC and converted into 10 V DC (direct current) output, which provides sufficient power to drive a microfluidic device to manipulate biological particles such as beads and proteins via the DC dielectrophoresis (DC-DEP) effect. To our best knowledge, this is the first wirelessly powered microfluidic dielectrophoresis device. Although the work is preliminary, the device concept, the architecture, and the core technology are expected to stimulate many efforts in the future and transform the technology to a wide range of clinical and point-of-care applications. This journal is © The Royal Society of Chemistry 2011

Simulated variability of the Atlantic meridional overturning circulation

NASA Astrophysics Data System (ADS)

Bentsen, M.; Drange, H.; Furevik, T.; Zhou, T.

To examine the multi-annual to decadal scale variability of the Atlantic Meridional Overturning Circulation (AMOC) we conducted a four-member ensemble with a daily reanalysis forced, medium-resolution global version of the isopycnic coordinate ocean model MICOM, and a 300-years integration with the fully coupled Bergen Climate Model (BCM). The simulations of the AMOC with both model systems yield a long-term mean value of 18 Sv and decadal variability with an amplitude of 1-3 Sv. The power spectrum of the inter-annual to decadal scale variability of the AMOC in BCM generally follows the theoretical red noise spectrum, with indications of increased power near the 20-years period. Comparison with observational proxy indices for the AMOC, e.g. the thickness of the Labrador Sea Water, the strength of the baroclinic gyre circulation in the North Atlantic Ocean, and the surface temperature anomalies along the mean path of the Gulf Stream, shows similar trends and phasing of the variability, indicating that the simulated AMOC variability is robust and real. Mixing indices have been constructed for the Labrador, the Irminger and the Greenland-Iceland-Norwegian (GIN) seas. While convective mixing in the Labrador and the GIN seas are in opposite phase, and linked to the NAO as observations suggest, the convective mixing in the Irminger Sea is in phase with or leads the Labrador Sea. Newly formed deep water is seen as a slow, anomalous cold and fresh, plume flowing southward along the western continental slope of the Atlantic Ocean, with a return flow of warm and saline water on the surface. In addition, fast-travelling topographically trapped waves propagate southward along the continental slope towards equator, where they go east and continue along the eastern rim of the Atlantic. For both types of experiments, the Northern Hemisphere sea level pressure and 2 m temperature anomaly patterns computed based on the difference between climate states with strong and weak AMOC yields a NAO-like pattern with intensified Icelandic low and Azores high, and a warming of 0.25-0.5 °C of the central North Atlantic sea-surface temperature (SST). The reanalysis forced simulations indicate a coupling between the Labrador Sea Water production rate and an equatorial Atlantic SST index in accordance with observations. This coupling is not identified in the coupled simulation.

Fully Packaged Blue Energy Harvester by Hybridizing a Rolling Triboelectric Nanogenerator and an Electromagnetic Generator.

PubMed

Wang, Xin; Wen, Zhen; Guo, Hengyu; Wu, Changsheng; He, Xu; Lin, Long; Cao, Xia; Wang, Zhong Lin

2016-12-27

Ocean energy, in theory, is an enormous clean and renewable energy resource that can generate electric power much more than that required to power the entire globe without adding any pollution to the atmosphere. However, owing to a lack of effective technology, such blue energy is almost unexplored to meet the energy requirement of human society. In this work, a fully packaged hybrid nanogenerator consisting of a rolling triboelectric nanogenerator (R-TENG) and an electromagnetic generator (EMG) is developed to harvest water motion energy. The outstanding output performance of the R-TENG (45 cm 3 in volume and 28.3 g in weight) in the low-frequency range (<1.8 Hz) complements the ineffective output of EMG (337 cm 3 in volume and 311.8 g in weight) in the same range and thus enables the hybrid nanogenerator to deliver valuable outputs in a broad range of operation frequencies. Therefore, the hybrid nanogenerator can maximize the energy conversion efficiency and broaden the operating frequency simultaneously. In terms of charging capacitors, this hybrid nanogenerator provides not only high voltage and consistent charging from the TENG component but also fast charging speed from the EMG component. The practical application of the hybrid nanogenerator is also demonstrated to power light-emitting diodes by harvesting energy from stimulated tidal flow. The high robustness of the R-TENG is also validated based on the stable electrical output after continuous rolling motion. Therefore, the hybrid R-TENG and EMG device renders an effective and sustainable approach toward large-scale blue energy harvesting in a broad frequency range.

Advanced Control Systems for Aircraft Powerplants

DTIC Science & Technology

1980-02-01

production of high- integrity software. 1.0 INTRODUCTION Work on full-authority digital control for gas turbines was started at Rolls- Royce Limited... INTRODUCTION In order to fully understand the operation of the Secondary Power System Control Unit - abbreviated SPSCU - we must first take a close look at...Only Memory EPROM -- Erasable Read Only Memory PLA -- Power Lever Angle LVDT -- Linear Variable Differential Transformer INTRODUCTION Preliminary design

21. VIEW OF MIANUS RIVER RAILROAD BRIDGE LOOKING NORTHEAST FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. VIEW OF MIANUS RIVER RAILROAD BRIDGE LOOKING NORTHEAST FROM THE REMAINS OF THE COS COB POWER PLANT COALING DOCK. THE BRIDGE IS A ROLLING LIFT BASCULE TYPE BUILT IN 1894-1895. NOTE THE ABSENCE OF CATENARY OVER THE CHANNEL AND THE METHOD OF CARRYING POWER FEED OVER THE RIVER ON THE HIGH TOWERS ADJACENT TO THE LIFT SECTION OF THE BRIDGE. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT

Stretched exponentials and power laws in granular avalanching

NASA Astrophysics Data System (ADS)

Head, D. A.; Rodgers, G. J.

1999-02-01

We introduce a model for granular surface flow which exhibits both stretched exponential and power law avalanching over its parameter range. Two modes of transport are incorporated, a rolling layer consisting of individual particles and the overdamped, sliding motion of particle clusters. The crossover in behaviour observed in experiments on piles of rice is attributed to a change in the dominant mode of transport. We predict that power law avalanching will be observed whenever surface flow is dominated by clustered motion.

40 CFR 180.475 - Difenoconazole; tolerances for residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

....01 Carrot 0.50 Chickpea 0.08 Citrus, dried pulp 2.0 Citrus, oil 25 Corn, sweet, forage 0.01 Corn, sweet, kernel plus cob with husks removed 0.01 Corn, sweet, stover 0.01 Cotton, gin byproducts 0.05...

40 CFR 180.182 - Endosulfan; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Celery 8.0 Cherry, sweet 2.0 Cherry, tart 2.0 Collards 2.0 Corn, sweet, forage 12.0 Corn, sweet, kernel plus cob with husks removed 0.2 Corn, sweet, stover 14.0 Cotton, gin byproducts 30.0 Cotton, undelinted...

40 CFR 180.475 - Difenoconazole; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

....01 Carrot 0.50 Chickpea 0.08 Citrus, dried pulp 2.0 Citrus, oil 25 Corn, sweet, forage 0.01 Corn, sweet, kernel plus cob with husks removed 0.01 Corn, sweet, stover 0.01 Cotton, gin byproducts 0.05...

40 CFR 180.511 - Buprofezin; tolerances for residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Banana 0.20 Bean, snap, succulent 0.02 Berry, low growing, subgroup 13-07G 2.5 Birida 0.30 Brassica, head... Coffee, green bean 0.35 Cotton, gin byproducts 20.0 Cotton, undelinted seed 0.35 Custard apple 0.30...

27 CFR 5.39 - Presence of neutral spirits and coloring, flavoring, and blending materials.

Code of Federal Regulations, 2014 CFR

2014-04-01

....” (2) In the case of neutral spirits or of gin produced by a process of continuous distillation, there..., during distillation or storage, other than through contact with the oak container. Provided, that the...

27 CFR 5.39 - Presence of neutral spirits and coloring, flavoring, and blending materials.

Code of Federal Regulations, 2013 CFR

2013-04-01

....” (2) In the case of neutral spirits or of gin produced by a process of continuous distillation, there..., during distillation or storage, other than through contact with the oak container. Provided, that the...

Categorization of extraneous matter in cotton using machine vision systems

USDA-ARS?s Scientific Manuscript database

The Cotton Trash Identification System (CTIS) developed at the Southwestern Cotton Ginning Research Laboratory was evaluated for identification and categorization of extraneous matter in cotton. The CTIS bark/grass categorization was evaluated with USDA-Agricultural Marketing Service (AMS) extraneou...

Monitoring agricultural processing electrical energy use and efficiency

USDA-ARS?s Scientific Manuscript database

Energy costs have become proportionately larger as cotton post-harvest processing facilities have utilized other inputs more efficiently. A discrepancy in energy consumption per unit processed between facilities suggests that energy could be utilized more efficiently. Cotton gin facilities were in...

Cycling on rollers: influence of tyre pressure and cross section on power requirements.

PubMed

Reiser, Raoul; Watt, Jon; Peterson, Michael

2003-07-01

The resistance against a cyclist while riding on rollers is due mainly to rolling resistance produced by the deformation of the tyre as it rolls against small diameter drums. Resistance is then combined with wheel speed to set power output. The effect of tyre pressure and cross-section on power was investigated by systematically altering the pressure (552 kPa, 690 kPa, and 827 KPa) in a 20c, 23c, 25c, and 28c tyre of the same design while riding at a wheel speed of 45 kph. Average power over 1 minute was measured with a Power Tap Hub (Tune Corporation, Cambridge, Massachusetts, USA) on five occasions. Statistical significance was evaluated at p < 0.05. Power requirements increased significantly with each reduction in tyre pressure for all tyres and pressures except the 25c between 690 and 827 kPa. The 20c tyre required significantly more power from the cyclist at each tested tyre pressure when compared to the other tyres (which were not different from each other). The differences in resistance from tyre size were not observed when ridden on the road. Additionally, a slightly different tyre design from the same manufacturer responded similarly in the 20c, but was significantly different in the 23c size. It was also observed that power requirements increased significantly when both the wheels were ridden on the rollers as compared to just the rear wheel. These results indicate that the power requirements may be significantly altered by the cyclist by adjusting tyre pressure, tyre cross-section size, tyre type, and with the number of wheels contacting the rollers. However, the magnitude of these power requirements may not be suitable for intense workouts of trained cyclists.

Background and principles of throttles-only flight control

NASA Technical Reports Server (NTRS)

Burcham, Frank W., Jr.

1995-01-01

There have been many cases in which the crew of a multi-engine airplane had to use engine thrust for emergency flight control. Such a procedure is very difficult, because the propulsive control forces are small, the engine response is slow, and airplane dynamics such as the phugoid and dutch roll are difficult to damp with thrust. In general, thrust increases are used to climb, thrust decreases to descend, and differential thrust is used to turn. Average speed is not significantly affected by changes in throttle setting. Pitch control is achieved because of pitching moments due to speed changes, from thrust offset, and from the vertical component of thrust. Roll control is achieved by using differential thrust to develop yaw, which, through the normal dihedral effect, causes a roll. Control power in pitch and roll tends to increase as speed decreases. Although speed is not controlled by the throttles, configuration changes are often available (lowering gear, flaps, moving center-of-gravity) to change the speed. The airplane basic stability is also a significant factor. Fuel slosh and gyroscopic moments are small influences on throttles-only control. The background and principles of throttles-only flight control are described.

The conformal limit of inflation in the era of CMB polarimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pajer, Enrico; Wijck, Jaap V.S. van; Pimentel, Guilherme L., E-mail: enrico.pajer@gmail.com, E-mail: g.leitepimentel@uva.nl, E-mail: j.v.s.vanwijck@uu.nl

2017-06-01

We argue that the non-detection of primordial tensor modes has taught us a great deal about the primordial universe. In single-field slow-roll inflation, the current upper bound on the tensor-to-scalar ratio, r <0.07 (95% CL), implies that the Hubble slow-roll parameters obey ε||η , and therefore establishes the existence of a new hierarchy. We dub this regime the conformal limit of (slow-roll) inflation, and show that it includes Starobinsky-like inflation as well as all viable single-field models with a sub-Planckian field excursion. In this limit, all primordial correlators are constrained by the full conformal group to leading non-trivial order inmore » slow-roll. This fixes the power spectrum and the full bispectrum, and leads to the ''conformal'' shape of non-Gaussianity. The size of non-Gaussianity is related to the running of the spectral index by a consistency condition, and therefore it is expected to be small. In passing, we clarify the role of boundary terms in the ζ action, the order to which constraint equations need to be solved, and re-derive our results using the Wheeler-deWitt formalism.« less

Diboron compound-based organic light-emitting diodes with high efficiency and reduced efficiency roll-off

NASA Astrophysics Data System (ADS)

Wu, Tien-Lin; Huang, Min-Jie; Lin, Chih-Chun; Huang, Pei-Yun; Chou, Tsu-Yu; Chen-Cheng, Ren-Wu; Lin, Hao-Wu; Liu, Rai-Shung; Cheng, Chien-Hong

2018-04-01

Organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) materials are promising for the realization of highly efficient light emitters. However, such devices have so far suffered from efficiency roll-off at high luminance. Here, we report the design and synthesis of two diboron-based molecules, CzDBA and tBuCzDBA, which show excellent TADF properties and yield efficient OLEDs with very low efficiency roll-off. These donor-acceptor-donor (D-A-D) type and rod-like compounds concurrently generate TADF with a photoluminescence quantum yield of 100% and an 84% horizontal dipole ratio in the thin film. A green OLED based on CzDBA exhibits a high external quantum efficiency of 37.8 ± 0.6%, a current efficiency of 139.6 ± 2.8 cd A-1 and a power efficiency of 121.6 ± 3.1 lm W-1 with an efficiency roll-off of only 0.3% at 1,000 cd m-2. The device has a peak emission wavelength of 528 nm and colour coordinates of the Commission International de ĺEclairage (CIE) of (0.31, 0.61), making it attractive for colour-display applications.

Analytical validation of an explicit finite element model of a rolling element bearing with a localised line spall

NASA Astrophysics Data System (ADS)

Singh, Sarabjeet; Howard, Carl Q.; Hansen, Colin H.; Köpke, Uwe G.

2018-03-01

In this paper, numerically modelled vibration response of a rolling element bearing with a localised outer raceway line spall is presented. The results were obtained from a finite element (FE) model of the defective bearing solved using an explicit dynamics FE software package, LS-DYNA. Time domain vibration signals of the bearing obtained directly from the FE modelling were processed further to estimate time-frequency and frequency domain results, such as spectrogram and power spectrum, using standard signal processing techniques pertinent to the vibration-based monitoring of rolling element bearings. A logical approach to analyses of the numerically modelled results was developed with an aim to presenting the analytical validation of the modelled results. While the time and frequency domain analyses of the results show that the FE model generates accurate bearing kinematics and defect frequencies, the time-frequency analysis highlights the simulation of distinct low- and high-frequency characteristic vibration signals associated with the unloading and reloading of the rolling elements as they move in and out of the defect, respectively. Favourable agreement of the numerical and analytical results demonstrates the validation of the results from the explicit FE modelling of the bearing.

High-temperature flat-conductor cable

NASA Technical Reports Server (NTRS)

Rigling, W. S.

1976-01-01

Temperature limit of 25-conductor signal cable and 3-conductor power cable, fabricated using woven and roll laminated technique, increased from 200 C to 350 C when polyimide/fluorinated ethylene propylene or polytetrafluoroethylene insulation films and fluorinated ethylene propylene as adhesive medium is applied.

103. Photocopied 1983, from original drawing (DP49213), Picatinny Arsenal, NOVEMBER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

103. Photocopied 1983, from original drawing (DP-49213), Picatinny Arsenal, NOVEMBER 23, 1945. ROLLED POWDER AREA FINISHING PLANT: FLOW DIAGRAM.' - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

75 FR 70199 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... help develop a stable economic atmosphere and reduce risk for production, marketing, and distribution... without county level quantities ginned that could seriously affect transportation costs and marketing strategies. Description of Respondents: Business or other for-profit. Number of Respondents: 826. Frequency...

CATEGORIZATION OF EXTRANEOUS MATTER IN COTTON USING MACHINE VISION SYSTEMS

USDA-ARS?s Scientific Manuscript database

The Cotton Trash Identification System (CTIS) was developed at the Southwestern Cotton Ginning Research Laboratory to identify and categorize extraneous matter in cotton. The CTIS bark/grass categorization was evaluated with USDA-Agricultural Marketing Service (AMS) extraneous matter calls assigned ...

Grazing sericea lespedeza for control of gastrointestinal nematodes in lambs

USDA-ARS?s Scientific Manuscript database

Alternatives to chemical dewormers are needed to counter anthelmintic resistance and improve organic management systems. The objective was to examine the effectiveness of grazing sericea lespedeza (SL) compared with grass pastures for control of gastrointestinal nematodes (GIN) in lambs. In Experi...

Emissions from gas fired agricultural burners

USDA-ARS?s Scientific Manuscript database

Because of the Federal Clean Air Act, the San Joaquin Valley Unified Air Pollution Control District (SJVUAPCD) began defining Best Available Control Technology (BACT) for NOx emissions from cotton gin drying system gas fired burners in its jurisdiction. The NOx emission levels of conventionally used...

The non-alcoholic fraction of beer increases stromal cell derived factor 1 and the number of circulating endothelial progenitor cells in high cardiovascular risk subjects: a randomized clinical trial.

PubMed

Chiva-Blanch, Gemma; Condines, Ximena; Magraner, Emma; Roth, Irene; Valderas-Martínez, Palmira; Arranz, Sara; Casas, Rosa; Martínez-Huélamo, Miriam; Vallverdú-Queralt, Anna; Quifer-Rada, Paola; Lamuela-Raventos, Rosa M; Estruch, Ramon

2014-04-01

Moderate alcohol consumption is associated with a decrease in cardiovascular risk, but fermented beverages seem to confer greater cardiovascular protection due to their polyphenolic content. Circulating endothelial progenitor cells (EPC) are bone-marrow-derived stem cells with the ability to repair and maintain endothelial integrity and function and are considered as a surrogate marker of vascular function and cumulative cardiovascular risk. Nevertheless, no study has been carried out on the effects of moderate beer consumption on the number of circulating EPC in high cardiovascular risk patients. To compare the effects of moderate consumption of beer, non-alcoholic beer and gin on the number of circulating EPC and EPC-mobilizing factors. In this crossover trial, 33 men at high cardiovascular risk were randomized to receive beer (30 g alcohol/d), the equivalent amount of polyphenols in the form of non-alcoholic beer, or gin (30 g alcohol/d) for 4 weeks. Diet and physical exercise were carefully monitored. The number of circulating EPC and EPC-mobilizing factors were determined at baseline and after each intervention. After the beer and non-alcoholic beer interventions, the number of circulating EPC significantly increased by 8 and 5 units, respectively, while no significant differences were observed after the gin period. In correlation, stromal cell derived factor 1 increased significantly after the non-alcoholic and the beer interventions. The non-alcoholic fraction of beer increases the number of circulating EPC in peripheral blood from high cardiovascular risk subjects. http://www.controlled-trials.com/ISRCTN95345245 ISRCTN95345245. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

An Mcm10 Mutant Defective in ssDNA Binding Shows Defects in DNA Replication Initiation.

PubMed

Perez-Arnaiz, Patricia; Kaplan, Daniel L

2016-11-20

Mcm10 is an essential protein that functions to initiate DNA replication after the formation of the replication fork helicase. In this manuscript, we identified a budding yeast Mcm10 mutant (Mcm10-m2,3,4) that is defective in DNA binding in vitro. Moreover, this Mcm10-m2,3,4 mutant does not stimulate the phosphorylation of Mcm2 by Dbf4-dependent kinase (DDK) in vitro. When we expressed wild-type levels of mcm10-m2,3,4 in budding yeast cells, we observed a severe growth defect and a substantially decreased DNA replication. We also observed a substantially reduced replication protein A- chromatin immunoprecipitation signal at origins of replication, reduced levels of DDK-phosphorylated Mcm2, and diminished Go, Ichi, Ni, and San (GINS) association with Mcm2-7 in vivo. mcm5-bob1 bypasses the growth defect conferred by DDK-phosphodead Mcm2 in budding yeast. However, the growth defect observed by expressing mcm10-m2,3,4 is not bypassed by the mcm5-bob1 mutation. Furthermore, origin melting and GINS association with Mcm2-7 are substantially decreased for cells expressing mcm10-m2,3,4 in the mcm5-bob1 background. Thus, the origin melting and GINS-Mcm2-7 interaction defects we observed for mcm10-m2,3,4 are not explained by decreased Mcm2 phosphorylation by DDK, since the defects persist in an mcm5-bob1 background. These data suggest that DNA binding by Mcm10 is essential for the initiation of DNA replication. Copyright © 2016 Elsevier Ltd. All rights reserved.

Establishment rate of cattle gastrointestinal nematodes in farmed red deer (Cervus elaphus).

PubMed

Ten Doesschate, S J; Pomroy, W E; Tapia-Escárate, D; Scott, I; Wilson, P R

2017-08-30

Red deer can be infected with some gastrointestinal nematodes (GIN) of cattle but it is unknown to what extent. An indoor study was conducted to determine the establishment rate of cattle GIN in young deer. Five young calves and 5 young red deer were used. They were effectively treated with anthelmintics when housed and then infected 2 weeks later. After four weeks they were killed for total worm counts. Establishment rates were assessed comparing worm counts to the infective dose which were identified morphologically, and to the relative establishment rate of different species. The establishment rates (%) in cattle and deer respectively were H. contortus (8.0, 18.7, p=0.18), Ostertagia ostertagi (30.8, 0.7, p<0.001), Cooperia spp. (72.3, 2.3, p<0.001) and Trichostrongylus spp. (19.0, 25.3, p=0.12). The majority (>98%) of Trichostrongylus spp. were Trichostrongylus axei in both hosts and there were no differences between hosts for this species (p=0.11). In cattle >98% of Cooperia were Cooperia oncophora and the mean burden was much higher than in deer (p<0.01) where there were similar proportions of Cooperia oncophora, Cooperia punctata and C. curticei. Small numbers of Oesophagostomum venulosum were also present with 3X as many found in deer as in cattle (p<0.05). This study has shown that some cattle-origin GIN can establish in red deer. In particular, the establishment of H. contortus and T. axei could allow sufficient burdens to build up to be clinically significant. Importantly, almost no cattle Ostertagia species or small intestinal species established in deer. Copyright © 2017 Elsevier B.V. All rights reserved.

Growth and carcass attributes of growing Creole kids according to experimental infection level and type of diet.

PubMed

Cei, Willy; Hiol, Abel; Gobardhan, Jacky; Nepos, Angebert; Felicite, Yoan; Mahieu, Maurice; Alexandre, Gisele

2015-06-01

In the tropics one of the major constraints to goat production is infection by gastrointestinal nematodes (GIN). One promising alternative to chemotherapy is the improvement of host nutrition. The aim of this study was to assess the effects of infection and supplementation on packed cell volume (PCV), average daily gain (ADG) and carcass quality in growing Creole kids. Sixty male goats were reared indoors following a 2 × 3 factorial design: two experimental infection levels, (infected (I) and non-infected (NI)) and three diets D (G, kids were fed exclusively with tropical forages; B, kids were supplemented with dried and crushed banana and C, kids were supplemented with commercial pellets). Faecal egg counts did not vary among I groups (on average 2,200 ω/g). The PCV and ADG were improved (P < 0.001) for NI vs. I animals. There was a D effect (P < 0.001) and no I × D interaction was observed. There was no significant effect of GIN on the main carcass data, except the weights of liver, white offal and abdominal fat, which increased slightly in I compared with NI goats (P < 0.05). All carcass data increased significantly with the addition of supplement in the diet (P < 0.001), except for carcass-cut proportions. Meat physical parameters were degraded when I kids received low N diets (B or G) with higher lightness and water loss than in the C groups. Given that GIN affect the animal's N metabolism it is recommended to avoid the use of unbalanced diet such as those banana-based. Further research is necessary to assess the nutrition × parasitism interactions on physiological features and carcass quality of Creole goats.

One-step random mutagenesis by error-prone rolling circle amplification

PubMed Central

Fujii, Ryota; Kitaoka, Motomitsu; Hayashi, Kiyoshi

2004-01-01

In vitro random mutagenesis is a powerful tool for altering properties of enzymes. We describe here a novel random mutagenesis method using rolling circle amplification, named error-prone RCA. This method consists of only one DNA amplification step followed by transformation of the host strain, without treatment with any restriction enzymes or DNA ligases, and results in a randomly mutated plasmid library with 3–4 mutations per kilobase. Specific primers or special equipment, such as a thermal-cycler, are not required. This method permits rapid preparation of randomly mutated plasmid libraries, enabling random mutagenesis to become a more commonly used technique. PMID:15507684

X-15A-2 is rolled out of the paint shop after having the full scale ablative applied

NASA Image and Video Library

1967-06-23

X-15A-2 is rolled out of the paint shop after having the full scale ablative applied. In June 1967, the X-15A-2 rocket-powered research aircraft received a full-scale ablative coating to protect the craft from the high temperatures associated with hypersonic flight (above Mach 5). This pink eraser-like substance, applied to the X-15A-2 aircraft (56-6671), was then covered with a white sealant coat before flight. This coating would help the #2 aircraft reach the record speed of 4,520 mph (Mach 6.7).

Perovskite solar cells in N-I-P structure with four slot-die-coated layers

PubMed Central

Burkitt, Daniel; Searle, Justin

2018-01-01

The fabrication of perovskite solar cells in an N-I-P structure with compact titanium dioxide blocking, mesoporous titanium dioxide scaffold, single-step perovskite and hole-transport layers deposited using the slot-die coating technique is reported. Devices on fluorine-doped tin oxide-coated glass substrates with evaporated gold top contacts and four slot-die-coated layers are demonstrated, and best cells reach stabilized power conversion efficiencies of 7%. This work demonstrates the suitability of slot-die coating for the production of layers within this perovskite solar cell stack and the potential to transfer to large area and roll-to-roll manufacturing processes. PMID:29892402

Addressing the efficiency roll-off in a fluorescent OLED by facile electron transport layer doping and carrier confinement

NASA Astrophysics Data System (ADS)

Soman, Anjaly; M, Manuraj; Unni, K. N. Narayanan

2018-05-01

Organic light emitting diodes (OLEDs) often face the issue of decreasing power efficiency with increasing brightness. Loss of charge carrier balance is one of the factors contributing to the efficiency roll-off. We demonstrate that by using a combination of doped electron transport layer (ETL) and a specially chosen electron blocking layer (EBL) having high hole mobility, this efficiency roll-off can be effectively suppressed. A tris-(8-hydroxyquinoline) aluminium (Alq3) based OLED has been fabricated with 2,3,6,7-Tetrahydro-1,1,7,7,-tetramethyl-1H, 5H,11H-10-(2-benzothiazolyl) quinolizino-[9,9a, 1n gh]coumarin (C545T) as the emissive dopant. Bulk doping of the ETL with lithium fluoride (LiF) was optimized to increase the luminous intensity as well as the current efficiency. An EBL with high hole mobility introduced between the EML and the hole transport layer (HTL) improved the performance drastically, and the device brightness at 9 V got improved by a factor of 2.5 compared to that of the control device. While increasing the brightness from 100 cd/m2 to 1000 cd/m2, the power efficiency drop was 47% for the control device whereas only a drop of 15% was observed for the modified device. The possible mechanisms for the enhanced performance are discussed.

Highly reliable wind-rolling triboelectric nanogenerator operating in a wide wind speed range

PubMed Central

Yong, Hyungseok; Chung, Jihoon; Choi, Dukhyun; Jung, Daewoong; Cho, Minhaeng; Lee, Sangmin

2016-01-01

Triboelectric nanogenerators are aspiring energy harvesting methods that generate electricity from the triboelectric effect and electrostatic induction. This study demonstrates the harvesting of wind energy by a wind-rolling triboelectric nanogenerator (WR-TENG). The WR-TENG generates electricity from wind as a lightweight dielectric sphere rotates along the vortex whistle substrate. Increasing the kinetic energy of a dielectric converted from the wind energy is a key factor in fabricating an efficient WR-TENG. Computation fluid dynamics (CFD) analysis is introduced to estimate the precise movements of wind flow and to create a vortex flow by adjusting the parameters of the vortex whistle shape to optimize the design parameters to increase the kinetic energy conversion rate. WR-TENG can be utilized as both a self-powered wind velocity sensor and a wind energy harvester. A single unit of WR-TENG produces open-circuit voltage of 11.2 V and closed-circuit current of 1.86 μA. Additionally, findings reveal that the electrical power is enhanced through multiple electrode patterns in a single device and by increasing the number of dielectric spheres inside WR-TENG. The wind-rolling TENG is a novel approach for a sustainable wind-driven TENG that is sensitive and reliable to wind flows to harvest wasted wind energy in the near future. PMID:27653976

A Bio-Realistic Analog CMOS Cochlea Filter With High Tunability and Ultra-Steep Roll-Off.

PubMed

Wang, Shiwei; Koickal, Thomas Jacob; Hamilton, Alister; Cheung, Rebecca; Smith, Leslie S

2015-06-01

This paper presents the design and experimental results of a cochlea filter in analog very large scale integration (VLSI) which highly resembles physiologically measured response of the mammalian cochlea. The filter consists of three specialized sub-filter stages which respectively provide passive response in low frequencies, actively tunable response in mid-band frequencies and ultra-steep roll-off at transition frequencies from pass-band to stop-band. The sub-filters are implemented in balanced ladder topology using floating active inductors. Measured results from the fabricated chip show that wide range of mid-band tuning including gain tuning of over 20 dB, Q factor tuning from 2 to 19 as well as the bio-realistic center frequency shift are achieved by adjusting only one circuit parameter. Besides, the filter has an ultra-steep roll-off reaching over 300 dB/dec. By changing biasing currents, the filter can be configured to operate with center frequencies from 31 Hz to 8 kHz. The filter is 9th order, consumes 59.5 ∼ 90.0 μW power and occupies 0.9 mm2 chip area. A parallel bank of the proposed filter can be used as the front-end in hearing prosthesis devices, speech processors as well as other bio-inspired auditory systems owing to its bio-realistic behavior, low power consumption and small size.

Beta Function Quintessence Cosmological Parameters and Fundamental Constants I: Power and Inverse Power Law Dark Energy Potentials

NASA Astrophysics Data System (ADS)

Thompson, Rodger I.

2018-04-01

This investigation explores using the beta function formalism to calculate analytic solutions for the observable parameters in rolling scalar field cosmologies. The beta function in this case is the derivative of the scalar ϕ with respect to the natural log of the scale factor a, β (φ )=d φ /d ln (a). Once the beta function is specified, modulo a boundary condition, the evolution of the scalar ϕ as a function of the scale factor is completely determined. A rolling scalar field cosmology is defined by its action which can contain a range of physically motivated dark energy potentials. The beta function is chosen so that the associated "beta potential" is an accurate, but not exact, representation of the appropriate dark energy model potential. The basic concept is that the action with the beta potential is so similar to the action with the model potential that solutions using the beta action are accurate representations of solutions using the model action. The beta function provides an extra equation to calculate analytic functions of the cosmologies parameters as a function of the scale factor that are that are not calculable using only the model action. As an example this investigation uses a quintessence cosmology to demonstrate the method for power and inverse power law dark energy potentials. An interesting result of the investigation is that the Hubble parameter H is almost completely insensitive to the power of the potentials and that ΛCDM is part of the family of quintessence cosmology power law potentials with a power of zero.

Beta function quintessence cosmological parameters and fundamental constants - I. Power and inverse power law dark energy potentials

NASA Astrophysics Data System (ADS)

Thompson, Rodger I.

2018-07-01

This investigation explores using the beta function formalism to calculate analytic solutions for the observable parameters in rolling scalar field cosmologies. The beta function in this case is the derivative of the scalar φ with respect to the natural log of the scale factor a, β (φ)=d φ/d ln (a). Once the beta function is specified, modulo a boundary condition, the evolution of the scalar φ as a function of the scale factor is completely determined. A rolling scalar field cosmology is defined by its action which can contain a range of physically motivated dark energy potentials. The beta function is chosen so that the associated `beta potential' is an accurate, but not exact, representation of the appropriate dark energy model potential. The basic concept is that the action with the beta potential is so similar to the action with the model potential that solutions using the beta action are accurate representations of solutions using the model action. The beta function provides an extra equation to calculate analytic functions of the cosmologies parameters as a function of the scale factor that are not calculable using only the model action. As an example, this investigation uses a quintessence cosmology to demonstrate the method for power and inverse power law dark energy potentials. An interesting result of the investigation is that the Hubble parameter H is almost completely insensitive to the power of the potentials and that Λ cold dark matter is part of the family of quintessence cosmology power-law potentials with a power of zero.

49 CFR 238.17 - Movement of passenger equipment with other than power brake defects.

Code of Federal Regulations, 2011 CFR

2011-10-01

... be repaired; and (vii) The signature, if possible, as well as the job title and location of the... any unusual noise when its wheel set is spun freely (an on-track rolling test is acceptable) or when...

Automatic marker for photographic film

NASA Technical Reports Server (NTRS)

Gabbard, N. M.; Surrency, W. M.

1974-01-01

Commercially-produced wire-marking machine is modified to title or mark film rolls automatically. Machine is used with film drive mechanism which is powered with variable-speed, 28-volt dc motor. Up to 40 frames per minute can be marked, reducing time and cost of process.

40 CFR 180.449 - Avermectin B1 and its delta-8,9-isomer; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Apple 0.020 Apple, wet pomace 0.10 Avocado 0.020 Cattle, fat 0.03 Cattle, meat 0.02 Cattle, meat... Cotton, gin byproducts 0.15 Cotton, undelinted seed 0.005 Food products in food handling establishments...

40 CFR 180.449 - Avermectin B1 and its delta-8,9-isomer; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Apple 0.020 Apple, wet pomace 0.10 Avocado 0.020 Cattle, fat 0.03 Cattle, meat 0.02 Cattle, meat... Cotton, gin byproducts 0.15 Cotton, undelinted seed 0.005 Food products in food handling establishments...

Textile industry needs

USDA-ARS?s Scientific Manuscript database

The immediate customer of the cotton gin is the producer; however the ultimate customers are the textile mill and the consumer. The ginner has the challenging job to satisfy both the producer and the textile industry. The classing and grading systems are intended to assign economic value to the ba...

Cottonseed and cotton plant biomass

USDA-ARS?s Scientific Manuscript database

The cotton plant generates several marketable products as a result of the ginning process. The product that garners the most attention in regards to value and research efforts, is lint with cottonseed being secondary. In addition to lint and cottonseed, the plant material itself has a value that...

Role of DNA Replication Defects in Breast Cancer

DTIC Science & Technology

2009-10-01

Several recent studies have indicated that decreased levels of the MCM2-7 DNA replication proteins can lead to genomic instability (GIN) and cancer...exceeding that required for DNA replication under normal circumstances, we found that heterozygosity for 2 or more different MCMs caused genomic

76 FR 59906 - Fluazifop-P-butyl; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

...: This regulation establishes and increases tolerances for residues of fluazifop-P-butyl in or on cotton, gin byproducts; cotton, refined oil; and cotton, undelinted seed. Syngenta Crop Protection requested...-(trifluoromethyl)-2- pyridinyl]oxy]phenoxy]propanoic acid, expressed as fluazifop, in or on cotton, undelinted seed...

29 CFR 780.817 - Employees engaged in processing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... of raw sugar and molasses: Juice weighing and measurement, heating, clarification, filtration, evaporating, crystallization, centrifuging, and handling and storing the raw sugar or molasses at the plant...

29 CFR 780.817 - Employees engaged in processing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... of raw sugar and molasses: Juice weighing and measurement, heating, clarification, filtration, evaporating, crystallization, centrifuging, and handling and storing the raw sugar or molasses at the plant...

40 CFR 180.403 - Thidiazuron; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 0.4 Cattle, meat byproducts 0.4 Cotton, gin byproducts 24.0 Cotton, undelinted seed 0.3 Goat, fat 0.4 Goat, meat 0.4 Goat, meat byproducts 0.4 Hog, fat 0.4 Hog, meat 0.4 Hog, meat byproducts 0.4 Horse...

40 CFR 180.579 - Fenamidone; tolerances for residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., subgroup 5B 55 Cilantro, leaves 60 Cotton, gin byproducts 0.02 Cotton, undelinted seed 0.02 Garlic 0.20 Garlic, great headed 0.20 Leek 1.5 Okra 3.5 Onion, bulb 0.20 Onion, green 1.5 Onion, welsh 1.5 Pepper...

40 CFR 180.579 - Fenamidone; tolerances for residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., subgroup 5B 55 Cilantro, leaves 60 Cotton, gin byproducts 0.02 Cotton, undelinted seed 0.02 Garlic 0.20 Garlic, great headed 0.20 Leek 1.5 Okra 3.5 Onion, bulb 0.20 Onion, green 1.5 Onion, welsh 1.5 Pepper...

Estimation of spectral kurtosis

NASA Astrophysics Data System (ADS)

Sutawanir

2017-03-01

Rolling bearings are the most important elements in rotating machinery. Bearing frequently fall out of service for various reasons: heavy loads, unsuitable lubrications, ineffective sealing. Bearing faults may cause a decrease in performance. Analysis of bearing vibration signals has attracted attention in the field of monitoring and fault diagnosis. Bearing vibration signals give rich information for early detection of bearing failures. Spectral kurtosis, SK, is a parameter in frequency domain indicating how the impulsiveness of a signal varies with frequency. Faults in rolling bearings give rise to a series of short impulse responses as the rolling elements strike faults, SK potentially useful for determining frequency bands dominated by bearing fault signals. SK can provide a measure of the distance of the analyzed bearings from a healthy one. SK provides additional information given by the power spectral density (psd). This paper aims to explore the estimation of spectral kurtosis using short time Fourier transform known as spectrogram. The estimation of SK is similar to the estimation of psd. The estimation falls in model-free estimation and plug-in estimator. Some numerical studies using simulations are discussed to support the methodology. Spectral kurtosis of some stationary signals are analytically obtained and used in simulation study. Kurtosis of time domain has been a popular tool for detecting non-normality. Spectral kurtosis is an extension of kurtosis in frequency domain. The relationship between time domain and frequency domain analysis is establish through power spectrum-autocovariance Fourier transform. Fourier transform is the main tool for estimation in frequency domain. The power spectral density is estimated through periodogram. In this paper, the short time Fourier transform of the spectral kurtosis is reviewed, a bearing fault (inner ring and outer ring) is simulated. The bearing response, power spectrum, and spectral kurtosis are plotted to visualize the pattern of each fault. Keywords: frequency domain Fourier transform, spectral kurtosis, bearing fault

Structure of human Cdc45 and implications for CMG helicase function

PubMed Central

Simon, Aline C.; Sannino, Vincenzo; Costanzo, Vincenzo; Pellegrini, Luca

2016-01-01

Cell division cycle protein 45 (Cdc45) is required for DNA synthesis during genome duplication, as a component of the Cdc45-MCM-GINS (CMG) helicase. Despite its essential biological function, its biochemical role in DNA replication has remained elusive. Here we report the 2.1-Å crystal structure of human Cdc45, which confirms its evolutionary link with the bacterial RecJ nuclease and reveals several unexpected features that underpin its function in eukaryotic DNA replication. These include a long-range interaction between N- and C-terminal DHH domains, blocking access to the DNA-binding groove of its RecJ-like fold, and a helical insertion in its N-terminal DHH domain, which appears poised for replisome interactions. In combination with available electron microscopy data, we validate by mutational analysis the mechanism of Cdc45 association with the MCM ring and GINS co-activator, critical for CMG assembly. These findings provide an indispensable molecular basis to rationalize the essential role of Cdc45 in genomic duplication. PMID:27189187

Production of cellulosic ethanol from cotton processing residues after pretreatment with dilute sodium hydroxide and enzymatic hydrolysis.

PubMed

Fockink, Douglas Henrique; Maceno, Marcelo Adriano Corrêa; Ramos, Luiz Pereira

2015-01-01

In this study, production of cellulosic ethanol from two cotton processing residues was investigated after pretreatment with dilute sodium hydroxide. Pretreatment performance was investigated using a 2(2) factorial design and the highest glucan conversion was achieved at the most severe alkaline conditions (0.4g NaOH g(-1) of dry biomass and 120°C), reaching 51.6% and 38.8% for cotton gin waste (CGW) and cotton gin dust (CGD), respectively. The susceptibility of pretreated substrates to enzymatic hydrolysis was also investigated and the best condition was achieved at the lowest total solids (5wt%) and the highest enzyme loading (85mg of Cellic CTec2 g(-1) of dry substrate). However, the highest concentration of fermentable sugars - 47.8 and 42.5gL(-1) for CGD and CGW, respectively - was obtained at 15wt% total solids using this same enzyme loading. Substrate hydrolysates had no inhibitory effects on the fermenting microorganism. Copyright © 2015. Published by Elsevier Ltd.