40 CFR 63.5755 - How do I demonstrate compliance with the aluminum recreational boat surface coating spray gun...

Code of Federal Regulations, 2014 CFR

2014-07-01

... the aluminum recreational boat surface coating spray gun cleaning work practice standards? 63.5755... recreational boat surface coating spray gun cleaning work practice standards? You must demonstrate compliance with the aluminum coating spray gun cleaning work practice standards by meeting the requirements of...

40 CFR 63.5755 - How do I demonstrate compliance with the aluminum recreational boat surface coating spray gun...

Code of Federal Regulations, 2011 CFR

2011-07-01

... the aluminum recreational boat surface coating spray gun cleaning work practice standards? 63.5755... surface coating spray gun cleaning work practice standards? You must demonstrate compliance with the aluminum coating spray gun cleaning work practice standards by meeting the requirements of paragraph (a) or...

40 CFR 63.5755 - How do I demonstrate compliance with the aluminum recreational boat surface coating spray gun...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the aluminum recreational boat surface coating spray gun cleaning work practice standards? 63.5755... surface coating spray gun cleaning work practice standards? You must demonstrate compliance with the aluminum coating spray gun cleaning work practice standards by meeting the requirements of paragraph (a) or...

Practical Approaches for Assessment of Daily and Post-discharge Room Disinfection in Healthcare Facilities.

PubMed

Deshpande, Abhishek; Donskey, Curtis J

2017-09-01

Cleaning and disinfection in healthcare facilities is essential to ensure patient safety. This review examines practical strategies used to assess and improve the effectiveness of daily and post-discharge manual cleaning in healthcare facilities. Effective implementation of cleaning interventions requires objective monitoring of staff performance with regular feedback on performance. Use of fluorescent markers to assess thoroughness of cleaning and measurement of residual ATP can provide rapid and objective feedback to personnel and have been associated with improved cleaning. Direct observation of cleaning and interviews with front-line staff are useful to identify variations and deficiencies in practice that may not be detected by other methods. Although not recommended for routine monitoring, cultures can be helpful for outbreak investigations. Monitoring and feedback can be effective in improving cleaning and disinfection in healthcare facilities. Ongoing commitment within institutions is needed to sustain successful cleaning and disinfection programs.

Case Study: Using Microbe Molecular Biology for Gulf Oil Spill Clean Up

ERIC Educational Resources Information Center

Jones, Daniel R.

2011-01-01

This case has the student actively investigate the regulation of expression of a novel bacterial gene in the context of attempts to solve a real world problem, clean up of the April 2010 Deep Water Horizon oil spill in the Gulf of Mexico. Although the case is fictitious, it is based on factual gene regulatory characteristics of oil-degrading…

Bio-Inspired Self-Cleaning Surfaces

NASA Astrophysics Data System (ADS)

Liu, Kesong; Jiang, Lei

2012-08-01

Self-cleaning surfaces have drawn a lot of interest for both fundamental research and practical applications. This review focuses on the recent progress in mechanism, preparation, and application of self-cleaning surfaces. To date, self-cleaning has been demonstrated by the following four conceptual approaches: (a) TiO2-based superhydrophilic self-cleaning, (b) lotus effect self-cleaning (superhydrophobicity with a small sliding angle), (c) gecko setae-inspired self-cleaning, and (d) underwater organisms-inspired antifouling self-cleaning. Although a number of self-cleaning products have been commercialized, the remaining challenges and future outlook of self-cleaning surfaces are also briefly addressed. Through evolution, nature, which has long been a source of inspiration for scientists and engineers, has arrived at what is optimal. We hope this review will stimulate interdisciplinary collaboration among material science, chemistry, biology, physics, nanoscience, engineering, etc., which is essential for the rational design and reproducible construction of bio-inspired multifunctional self-cleaning surfaces in practical applications.

Clean birth and postnatal care practices to reduce neonatal deaths from sepsis and tetanus: a systematic review and Delphi estimation of mortality effect

PubMed Central

2011-01-01

Background Annually over 520,000 newborns die from neonatal sepsis, and 60,000 more from tetanus. Estimates of the effect of clean birth and postnatal care practices are required for evidence-based program planning. Objective To review the evidence for clean birth and postnatal care practices and estimate the effect on neonatal mortality from sepsis and tetanus for the Lives Saved Tool (LiST). Methods We conducted a systematic review of multiple databases. Data were abstracted into standard tables and assessed by GRADE criteria. Where appropriate, meta-analyses were undertaken. For interventions with low quality evidence but a strong GRADE recommendation, a Delphi process was conducted. Results Low quality evidence supports a reduction in all-cause neonatal mortality (19% (95% c.i. 1–34%)), cord infection (30% (95% c.i. 20–39%)) and neonatal tetanus (49% (95% c.i. 35–62%)) with birth attendant handwashing. Very low quality evidence supports a reduction in neonatal tetanus mortality with a clean birth surface (93% (95% c.i. 77-100%)) and no relationship between a clean perineum and tetanus. Low quality evidence supports a reduction of neonatal tetanus with facility birth (68% (95% c.i. 47-88%). No relationship was found between birth place and cord infections or sepsis mortality. For postnatal clean practices, all-cause mortality is reduced with chlorhexidine cord applications in the first 24 hours of life (34% (95% c.i. 5–54%, moderate quality evidence) and antimicrobial cord applications (63% (95% c.i. 41–86%, low quality evidence). One study of postnatal maternal handwashing reported reductions in all-cause mortality (44% (95% c.i. 18–62%)) and cord infection ((24% (95% c.i. 5-40%)). Given the low quality of evidence, a Delphi expert opinion process was undertaken. Thirty experts reached consensus regarding reduction of neonatal sepsis deaths by clean birth practices at home (15% (IQR 10–20)) or in a facility (27% IQR 24–36)), and by clean postnatal care practices (40% (IQR 25–50)). The panel estimated that neonatal tetanus mortality was reduced by clean birth practices at home (30% (IQR(20–30)), or in a facility (38% (IQR 34–40)), and by clean postnatal care practices (40% (IQR 30–50)). Conclusion According to expert opinion, clean birth and particularly postnatal care practices are effective in reducing neonatal mortality from sepsis and tetanus. Further research is required regarding optimal implementation strategies. PMID:21501428

Evaluation of Bacterial Contamination of Clipper Blades in Small Animal Private Practice.

PubMed

Mount, Rebecca; Schick, Anthea E; Lewis, Thomas P; Newton, Heide M

2016-01-01

Nosocomial infections are a growing concern in veterinary hospitals, and identifying fomites is imperative to reducing the risk of pathogen transmission. In veterinary medicine, shaving of hair is necessary prior to many procedures. Contaminated clipper blades have been cited as potential fomites involved in the transmission of pathogens in veterinary and human medicine. The primary goal of this study was to evaluate bacterial contamination of clipper blades in veterinary practices. A secondary goal was to assess whether there was an association between bacterial contamination of clipper blades and clipper blade cleaning solutions, clipper blade cleaning protocols, clipper blade storage, and type of practice. Sixty clipper blades from 60 different practices were cultured. Information regarding blade cleaning solutions, protocols, and storage was collected from each practice. Fifty-one percent (31/60) of clipper blades sampled were contaminated with bacteria. Category of cleaning solutions had a significant association with bacterial contamination (P < 0.02). Cleaning frequency (P = 0.55), storage location (P = 0.26), and practice type (P = 0.06) had no significant association with bacterial contamination. This study documented bacterial contamination of clipper blades in veterinary practices, and clipper blades should be considered potential fomites.

A study of blood contamination of Siqveland matrix bands.

PubMed

Lowe, A H; Bagg, J; Burke, F J T; MacKenzie, D; McHugh, S

2002-01-12

AIMS To use a sensitive forensic test to measure blood contamination of used Siqveland matrix bands following routine cleaning and sterilisation procedures in general dental practice. Sixteen general dental practices in the West of Scotland participated. Details of instrument cleaning procedures were recorded for each practice. A total of 133 Siqveland matrix bands were recovered following cleaning and sterilisation and were examined for residual blood contamination by the Kastle-Meyer test, a well-recognised forensic technique. Ultrasonic baths were used for the cleaning of 62 (47%) bands and retainers and the remainder (53%) were hand scrubbed prior to autoclaving. Overall, 21% of the matrix bands and 19% of the retainers gave a positive Kastle-Meyer test, indicative of residual blood contamination, following cleaning and sterilisation. In relation to cleaning method, 34% of hand-scrubbed bands and 32% of hand-scrubbed retainers were positive for residual blood by the Kastle-Meyer test compared with 6% and 3% respectively of ultrasonically cleaned bands and retainers (P < 0.001). If Siqveland matrix bands are re-processed in the assembled state, then adequate pre-sterilisation cleaning cannot be achieved reliably. Ultrasonic baths are significantly more effective than hand cleaning for these items of equipment.

Self-ear cleaning practices and the associated risk of ear injuries and ear-related symptoms in a group of university students.

PubMed

Khan, Nasim Banu; Thaver, Sivashnee; Govender, Samantha Marlene

2017-12-31

Self-ear cleaning is the insertion of objects into the ear canal to clean it, a widespread practice that has the potential to compromise its integrity as a natural, selfcleansing mechanism, and a risk factor for possible injuries. The practice is common among young adults and highest in university than any other graduates. This study aimed to determine the self-ear cleaning practices and associated risk of injury and related symptoms in undergraduate students at KwaZulu-Natal University. The descriptive survey utilized a self-administered questionnaire. Of the 206 participants that responded, 98% engaged in self-ear cleaning, with 75% indicating that it was beneficial. The commonest method (79.6%) being the use of cotton buds, with an associated injury rate of 2.4%. There was no statistically significant associations between those who used or did not use cotton buds and the symptoms experienced. The complications indicate that self-ear cleaning does pose a risk for injury, necessitating more community information and education.

Implementing AORN recommended practices for environmental cleaning.

PubMed

Allen, George

2014-05-01

In recent years, researchers have developed an increasing awareness of the role of the environment in the development of health care-associated infections. AORN's "Recommended practices for environmental cleaning" is an evidence-based document that provides specific guidance for cleaning processes, for the selection of appropriate cleaning equipment and supplies, and for ongoing education and quality improvement. This updated recommended practices document has an expanded focus on the need for health care personnel to work collaboratively to accomplish adequately thorough cleanliness in a culture of safety and mutual support. Perioperative nurses, as the primary advocates for patients while they are being cared for in the perioperative setting, should help ensure that a safe, clean environment is reestablished after each surgical procedure. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Clean delivery practices in rural northern Ghana: a qualitative study of community and provider knowledge, attitudes, and beliefs

PubMed Central

2012-01-01

Background Knowledge, attitudes and practices of community members and healthcare providers in rural northern Ghana regarding clean delivery are not well understood. This study explores hand washing/use of gloves during delivery, delivering on a clean surface, sterile cord cutting, appropriate cord tying, proper cord care following delivery, and infant bathing and cleanliness. Methods In-depth interviews and focus group discussions were audiotaped, transcribed, and analyzed using NVivo 9.0. Results 253 respondents participated, including women with newborn infants, grandmothers, household and compound heads, community leaders, traditional birth attendants, and formally trained health care providers. There is widespread understanding of the need for clean delivery to reduce the risk of infection to both mothers and their babies during and shortly after delivery. Despite this understanding, the use of gloves during delivery and hand washing during and after delivery were mentioned infrequently. The need for a clean delivery surface was raised repeatedly, including explicit discussion of avoiding delivering in the dirt. Many activities to do with cord care involved non-sterile materials and practices: 1) Cord cutting was done with a variety of tools, and the most commonly used were razor blades or scissors; 2) Cord tying utilized a variety of materials, including string, rope, thread, twigs, and clamps; and 3) Cord care often involved applying traditional salves to the cord - including shea butter, ground shea nuts, local herbs, local oil, or “red earth sand.” Keeping babies and their surroundings clean was mentioned repeatedly as an important way to keep babies from falling ill. Conclusions This study suggests a widespread understanding in rural northern Ghana of the need for clean delivery. Nonetheless, many recommended clean delivery practices are ignored. Overarching themes emerging from this study included the increasing use of facility-based delivery, the disconnect between healthcare providers and the community, and the critical role grandmothers play in ensuring clean delivery practices. Future interventions to address clean delivery and prevention of neonatal infections include educating healthcare providers about harmful traditional practices so they are specifically addressed, strengthening facilities, and incorporating influential community members such as grandmothers to ensure success. PMID:22703032

Clean delivery practices in rural northern Ghana: a qualitative study of community and provider knowledge, attitudes, and beliefs.

PubMed

Moyer, Cheryl A; Aborigo, Raymond Akawire; Logonia, Gideon; Affah, Gideon; Rominski, Sarah; Adongo, Philip B; Williams, John; Hodgson, Abraham; Engmann, Cyril

2012-06-15

Knowledge, attitudes and practices of community members and healthcare providers in rural northern Ghana regarding clean delivery are not well understood. This study explores hand washing/use of gloves during delivery, delivering on a clean surface, sterile cord cutting, appropriate cord tying, proper cord care following delivery, and infant bathing and cleanliness. In-depth interviews and focus group discussions were audiotaped, transcribed, and analyzed using NVivo 9.0. 253 respondents participated, including women with newborn infants, grandmothers, household and compound heads, community leaders, traditional birth attendants, and formally trained health care providers. There is widespread understanding of the need for clean delivery to reduce the risk of infection to both mothers and their babies during and shortly after delivery. Despite this understanding, the use of gloves during delivery and hand washing during and after delivery were mentioned infrequently. The need for a clean delivery surface was raised repeatedly, including explicit discussion of avoiding delivering in the dirt. Many activities to do with cord care involved non-sterile materials and practices: 1) Cord cutting was done with a variety of tools, and the most commonly used were razor blades or scissors; 2) Cord tying utilized a variety of materials, including string, rope, thread, twigs, and clamps; and 3) Cord care often involved applying traditional salves to the cord - including shea butter, ground shea nuts, local herbs, local oil, or "red earth sand." Keeping babies and their surroundings clean was mentioned repeatedly as an important way to keep babies from falling ill. This study suggests a widespread understanding in rural northern Ghana of the need for clean delivery. Nonetheless, many recommended clean delivery practices are ignored. Overarching themes emerging from this study included the increasing use of facility-based delivery, the disconnect between healthcare providers and the community, and the critical role grandmothers play in ensuring clean delivery practices. Future interventions to address clean delivery and prevention of neonatal infections include educating healthcare providers about harmful traditional practices so they are specifically addressed, strengthening facilities, and incorporating influential community members such as grandmothers to ensure success.

Integrated Mid-Continent Carbon Capture, Sequestration & Enhanced Oil Recovery Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brian McPherson

2010-08-31

A consortium of research partners led by the Southwest Regional Partnership on Carbon Sequestration and industry partners, including CAP CO2 LLC, Blue Source LLC, Coffeyville Resources, Nitrogen Fertilizers LLC, Ash Grove Cement Company, Kansas Ethanol LLC, Headwaters Clean Carbon Services, Black & Veatch, and Schlumberger Carbon Services, conducted a feasibility study of a large-scale CCS commercialization project that included large-scale CO{sub 2} sources. The overall objective of this project, entitled the 'Integrated Mid-Continent Carbon Capture, Sequestration and Enhanced Oil Recovery Project' was to design an integrated system of US mid-continent industrial CO{sub 2} sources with CO{sub 2} capture, and geologicmore » sequestration in deep saline formations and in oil field reservoirs with concomitant EOR. Findings of this project suggest that deep saline sequestration in the mid-continent region is not feasible without major financial incentives, such as tax credits or otherwise, that do not exist at this time. However, results of the analysis suggest that enhanced oil recovery with carbon sequestration is indeed feasible and practical for specific types of geologic settings in the Midwestern U.S.« less

15 CFR 971.601 - Environmental requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Environmental Effects... will give consideration to the following Ocean Discharge Criteria of the Clean Water Act (40 CFR part...

15 CFR 971.601 - Environmental requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Environmental Effects... will give consideration to the following Ocean Discharge Criteria of the Clean Water Act (40 CFR part...

15 CFR 971.601 - Environmental requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Environmental Effects... will give consideration to the following Ocean Discharge Criteria of the Clean Water Act (40 CFR part...

15 CFR 971.601 - Environmental requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Environmental Effects... will give consideration to the following Ocean Discharge Criteria of the Clean Water Act (40 CFR part...

Identification of Phase Relationships and Incorporation Mechanisms of Barium in Calcite Internodes of Deep-Sea Bamboo Corals

NASA Astrophysics Data System (ADS)

Ptacek, J. L.; Geyman, B.; Horner, T. J.; Auro, M. E. E.; Hill, T. M.; LaVigne, M.

2016-12-01

Insufficient instrumental and geochemical records have led to a gap in knowledge of how intermediate/deep water masses respond to decadal shifts in surface atmospheric-ocean climate that drive changes in ocean ventilation, nutrient cycling, and export productivity. Due to their longevity, depth range (500-2000m), and radial growth bands, bamboo corals have been proposed as high-resolution intermediate/deep ocean archives of elements with nutrient-like distributions, such as barium. Previous work showed bamboo corals incorporate barium into their calcitic internodes with a near-constant proportionality to dissolved (Ba)sw, indicating that (Ba/Ca)coral may be a useful tracer of refractory nutrient distributions in the past. However, some intermediate- and deep-sea bamboo corals exhibit highly variable Ba/Ca, which may result from incorporation of extraneous Ba-bearing phases into coral skeletons (e.g. barite, organic matter, lithogenic particles) rather than true changes in ambient (Ba)SW. To this end, we developed and applied a sequential cleaning experiment to identify the host phases of Ba in coral samples recovered from the North Pacific California Margin oxygen minimum zone (800-2000m). Milled coral samples were homogenized and subjected to multiple cleaning protocols to isolate and remove detrital/fine grain particles (with H2O and HNO3), organic matter (with H2O2), and barite (with an alkaline DTPA solution), before Ba/Ca analysis via ICP-MS. We found that the cleaning process did not systematically alter the Ba/Ca of the samples, and analysis of powders via SEM BSE-EDS revealed no identifiable barite. Our preliminary results indicate that there is minimal incorporation of non-lattice bound barium phases by these corals, and further verifies the suggestion that the main driver of (Ba/Ca)coral is the incorporation of Ba2+ in proportion to (Ba)sw. The results of our study help to evaluate how the Ba/Ca proxy in deep-sea bamboo corals should be interpreted in future sclerochronological research, particularly in the context of reconstructing biogeochemical changes in intermediate/deep ocean water mass geometry and/or nutrient inventories prior to modern geochemical observations.

Assessment of hospital daily cleaning practices using ATP bioluminescence in a developing country.

PubMed

Zambrano, Alejandra A; Jones, Alex; Otero, Paula; Ajenjo, Maria Cristina; Labarca, Jaime A

2014-01-01

Visual assessment of surfaces may not be enough to document the level of cleanliness in the hospital setting. It is necessary to introduce quantitative methods to document the results of this practice. To evaluate the efficacy of hospital terminal cleaning procedures, using an adenosine triphosphate (ATP) bioluminescence method in a teaching hospital. During 2008 we conducted an evaluation using ATP bioluminescence LIGHTNING MVP™ (Arquimed) of external and internal housekeeping service. After conducting an initial evaluation we implemented education of cleaning practices and finally we did a post intervention evaluation. Using chi-square method we compared prior versus after cleaning, quality of cleaning performed by external versus internal personnel, single versus double terminal cleaning procedures and prior versus after intervention. A finding of three RLU or less was considered a clean surface. We performed 198 evaluations in 33 patient units and nine OR. Internal personnel accomplished 25.37% of clean surfaces before and 80% after the education intervention (p=0.01). In contrast, external personnel obtained 68.8% before and 73.33% after intervention (p=0.3). This study suggests that visual assessment is not enough to ensure quality of the process and it is necessary to document the level of cleanliness by quantitative methods. Copyright © 2014 Elsevier Editora Ltda. All rights reserved.

Perioperative hair removal: A review of best practice and a practice improvement opportunity.

PubMed

Spencer, Maureen; Barnden, Marsha; Johnson, Helen Boehm; Fauerbach, Loretta Litz; Graham, Denise; Edmiston, Charles E

2018-06-01

The current practice of perioperative hair removal reflects research-driven changes designed to minimize the risk of surgical wound infection. An aspect of the practice which has received less scrutiny is the clean-up of the clipped hair. This process is critical. The loose fibers represent a potential infection risk because of the micro-organisms they can carry, but their clean-up can pose a logistical problem because of the time required to remove them. Research has demonstrated that the most commonly employed means of clean-up, the use of adhesive tape or sticky mitts, can be both ineffective and time-consuming in addition to posing an infection risk from cross-contamination. Recently published research evaluating surgical clippers fitted with a vacuum-assisted hair collection device highlights the potential for significant practice improvement in the perioperative hair removal clean-up process. These improvements include not only further mitigation of potential infection risk but also substantial OR time and cost savings.

No positive effect of Acid etching or plasma cleaning on osseointegration of titanium implants in a canine femoral condyle press-fit model.

PubMed

Saksø, H; Jakobsen, T; Saksø, M; Baas, J; Jakobsen, Ss; Soballe, K

2013-01-01

Implant surface treatments that improve early osseointegration may prove useful in long-term survival of uncemented implants. We investigated Acid Etching and Plasma Cleaning on titanium implants. In a randomized, paired animal study, four porous coated Ti implants were inserted into the femurs of each of ten dogs. PC (Porous Coating; control)PC+PSHA (Plasma Sprayed Hydroxyapatite; positive control)PC+ET (Acid Etch)PC+ET+PLCN (Plasma Cleaning) After four weeks mechanical fixation was evaluated by push-out test and osseointegration by histomorphometry. The PSHA-coated implants were better osseointegrated than the three other groups on outer surface implant porosity (p<0.05) while there was no statistical difference in deep surface implant porosity when compared with nontreated implant. Within the deep surface implant porosity, there was more newly formed bone in the control group compared to the ET and ET+PCLN groups (p<0.05). In all compared groups, there was no statistical difference in any biomechanical parameter. In terms of osseointegration on outer surface implant porosity PC+PSHA was superior to the other three groups. Neither the acid etching nor the plasma cleaning offered any advantage in terms of implant osseointegration. There was no statistical difference in any of the biomechanical parameters among all groups in the press-fit model at 4 weeks of evaluation time.

40 CFR 22.44 - Supplemental rules of practice governing the termination of permits under section 402(a) of the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... governing the termination of permits under section 402(a) of the Clean Water Act or under section 3008(a)(3... Supplemental rules of practice governing the termination of permits under section 402(a) of the Clean Water Act... permits under section 402(a) of the Clean Water Act or under section 3008(a)(3) of the Resource...

40 CFR 22.44 - Supplemental rules of practice governing the termination of permits under section 402(a) of the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... governing the termination of permits under section 402(a) of the Clean Water Act or under section 3008(a)(3... Supplemental rules of practice governing the termination of permits under section 402(a) of the Clean Water Act... permits under section 402(a) of the Clean Water Act or under section 3008(a)(3) of the Resource...

40 CFR 22.44 - Supplemental rules of practice governing the termination of permits under section 402(a) of the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... governing the termination of permits under section 402(a) of the Clean Water Act or under section 3008(a)(3... Supplemental rules of practice governing the termination of permits under section 402(a) of the Clean Water Act... permits under section 402(a) of the Clean Water Act or under section 3008(a)(3) of the Resource...

40 CFR 22.44 - Supplemental rules of practice governing the termination of permits under section 402(a) of the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... governing the termination of permits under section 402(a) of the Clean Water Act or under section 3008(a)(3... Supplemental rules of practice governing the termination of permits under section 402(a) of the Clean Water Act... permits under section 402(a) of the Clean Water Act or under section 3008(a)(3) of the Resource...

Impact of backwashing procedures on deep bed filtration productivity in drinking water treatment.

PubMed

Slavik, Irene; Jehmlich, Alexander; Uhl, Wolfgang

2013-10-15

Backwash procedures for deep bed filters were evaluated and compared by means of a new integrated approach based on productivity. For this, different backwash procedures were experimentally evaluated by using a pilot plant for direct filtration. A standard backwash mode as applied in practice served as a reference and effluent turbidity was used as the criterion for filter run termination. The backwash water volumes needed, duration of the filter-to-waste period, time out of operation, total volume discharged and filter run-time were determined and used to calculate average filtration velocity and average productivity. Results for filter run-times, filter backwash volumes, and filter-to-waste volumes showed considerable differences between the backwash procedures. Thus, backwash procedures with additional clear flushing phases were characterised by an increased need for backwash water. However, this additional water consumption could not be compensated by savings during filter ripening. Compared to the reference backwash procedure, filter run-times were longer for both single-media and dual-media filters when air scour and air/water flush were optimised with respect to flow rates and the proportion of air and water. This means that drinking water production time is longer and less water is needed for filter bed cleaning. Also, backwashing with additional clear flushing phases resulted in longer filter run-times before turbidity breakthrough. However, regarding the productivity of the filtration process, it was shown that it was almost the same for all of the backwash procedures investigated in this study. Due to this unexpected finding, the relationships between filter bed cleaning, filter ripening and filtration performance were considered and important conclusions and new approaches for process optimisation and resource savings were derived. Copyright © 2013 Elsevier Ltd. All rights reserved.

Deep Energy Retrofit Guidance for the Building America Solutions Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Less, Brennan; Walker, Iain

2015-01-01

The U.S. DOE Building America program has established a research agenda targeting market-relevant strategies to achieve 40% reductions in existing home energy use by 2030. Deep Energy Retrofits (DERs) are part of the strategy to meet and exceed this goal. DERs are projects that create new, valuable assets from existing residences, by bringing homes into alignment with the expectations of the 21st century. Ideally, high energy using, dated homes that are failing to provide adequate modern services to their owners and occupants (e.g., comfortable temperatures, acceptable humidity, clean, healthy), are transformed through comprehensive upgrades to the building envelope, services andmore » miscellaneous loads into next generation high performance homes. These guidance documents provide information to aid in the broader market adoption of DERs. They are intended for inclusion in the online resource the Building America Solutions Center (BASC). This document is an assemblage of multiple entries in the BASC, each of which addresses a specific aspect of Deep Energy Retrofit best practices for projects targeting at least 50% energy reductions. The contents are based upon a review of actual DERs in the U.S., as well as a mixture of engineering judgment, published guidance from DOE research in technologies and DERs, simulations of cost-optimal DERs, Energy Star and Consortium for Energy Efficiency (CEE) product criteria, and energy codes.« less

7 CFR 51.570 - Clean.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Standards for Celery Definitions § 51.570 Clean. Clean means that the stalk is practically free from dirt or other foreign material. Stalks shall be permitted to have a small amount of dirt on the inside of the...

Effects of retrofit emission controls and work practices on perchloroethylene exposures in small dry-cleaning shops.

PubMed

Ewers, Lynda M; Ruder, Avima M; Petersen, Martin R; Earnest, G Scott; Goldenhar, Linda M

2002-02-01

The effectiveness of commercially available interventions for reducing workers' perchloroethylene exposures in three small dry-cleaning shops was evaluated. Depending upon machine configuration, the intervention consisted of the addition of either a refrigerated condenser or a closed-loop carbon adsorber to the existing dry-cleaning machine. These relatively inexpensive (less than $5000) engineering controls were designed to reduce perchloroethylene emissions when dry-cleaning machine doors were opened for loading or unloading. Effectiveness of the interventions was judged by comparing pre- and postintervention perchloroethylene exposures using three types of measurements in each shop: (1) full-shift, personal breathing zone, air monitoring, (2) next-morning, end-exhaled worker breath concentrations of perchloroethylene, and (3) differences in the end-exhaled breath perchloroethylene concentrations before and after opening the dry-cleaning machine door. In general, measurements supported the hypothesis that machine operators' exposures to perchloroethylene can be reduced. However, work practices, especially maintenance practices, influenced exposures more than was originally anticipated. Only owners of dry-cleaning machines in good repair, with few leaks, should consider retrofitting them, and only after consultation with their machine's manufacturer. If machines are in poor condition, a new machine or alternative technology should be considered. Shop owners and employees should never circumvent safety features on dry-cleaning machines.

Recreational Vessels and the Clean Boating Act

EPA Pesticide Factsheets

Homepage for content on the Clean Boating Act, which requires the EPA to develop best management practices for discharges from recreational vessels. The page links to information about the Clean Water Act amendment, its history and public participation.

SC3: Protecting Students and Staff with Green Cleaning

ERIC Educational Resources Information Center

US Environmental Protection Agency, 2008

2008-01-01

EPA's Schools Chemical Cleanout Campaign (SC3) is working to encourage schools to use green cleaning practices to safely clean their classrooms and grounds. From elementary school maintenance closets to high school chemistry labs, schools use a variety of chemicals. Some of the most essential chemicals are those that keep schools clean and safe…

Cleaning practices and cleaning products in nurseries and schools: to what extent can they impact indoor air quality?

PubMed

Wei, W; Boumier, J; Wyart, G; Ramalho, O; Mandin, C

2016-08-01

In the framework of a nationwide survey on indoor air quality conducted from September 2009 to June 2011 in 310 nurseries, kindergartens, and elementary schools in all regions of France, cleaning practices and products were described through an extensive questionnaire completed on-site by expert building inspectors. The questionnaire included the cleaning frequencies and periods, cleaning techniques, whether windows were open during cleaning, and the commercial names of the products used. Analysis of the questionnaire responses showed that cleaning was generally performed daily for furniture and floors. It was performed mostly in the evening with wet mopping and with one or more windows open. Five hundred eighty-four different cleaning products were listed, among which 218 safety data sheets (SDSs) were available and analyzed. One hundred fifty-two chemical substances were identified in the SDSs. The typical substances in cleaning products included alcohols, chlorides, terpenes, aldehydes, and ethers; more than half of them are irritants. Two endocrine disruptors, 2-phenylphenol and Galaxolide, were identified in two cleaning products used every day to clean the floors, in seven kindergartens and in a nursery respectively. Eleven reactive substances containing C=C double bonds, mostly terpenes, were identified in a wide variety of cleaning products. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Removal of biofilm from contact lens storage cases.

PubMed

Wu, Yvonne T; Zhu, Hua; Willcox, Mark; Stapleton, Fiona

2010-12-01

Lens case hygiene practices are important in maintaining safe contact lens wear. However, the effectiveness of various lens case cleaning practices have not been evaluated and compared. This in vitro study aimed to evaluate and compare the efficacy of cleaning practices that are most commonly carried out by lens wearers and recommended by practitioners. Pseudomonas aeruginosa 122, Serratia marcescens ATCC 13880, and Staphylococcus aureus ATCC 6538 were the challenge bacteria for biofilm formation on unused lens cases from two different manufacturers. After establishment of the biofilm, each lens case was subjected to one of the six cleaning regimens: "rinsed," "rubbed and rinsed," "air-dried," "soaked in a multipurpose contact lens solution," "tissue-wiped," and "lids recapped." The level of residual biofilm was quantified at the end of each cleaning regimen. The efficacy of each cleaning regimen was then compared. Mechanical rubbing and wiping of lens cases were the most effective cleaning regimen tested in reducing biofilm. Soaking lenses in disinfecting solution for 6 hours removed the majority of biofilm from lens cases. Rinsing lens cases alone provided only minimal efficacy in reducing biofilm. Air-drying or recapping the cases with the lid without any other additional cleaning methods were the least efficient at removing biofilm. Based on this study, digital rubbing and rinsing and/or wiping the lens cases with tissue is recommended. Air-drying or recapping the lens case lids after use without any additional cleaning methods should be discouraged with non-antimicrobial lens cases.

Energy 101: Geothermal Energy

ScienceCinema

None

2018-05-30

See how we can generate clean, renewable energy from hot water sources deep beneath the Earth's surface. The video highlights the basic principles at work in geothermal energy production, and illustrates three different ways the Earth's heat can be converted into electricity.

Notification: Audit of City of Houston’s Use of Funds and Contracting Practices Under the Clean Water State Revolving Fund Program

EPA Pesticide Factsheets

Project #OA-FY17-0380, November 7, 2017. The EPA OIG plans to begin preliminary research on the city of Houston, Texas’s, use of funds and contracting practices under the Clean Water State Revolving Fund (CWSRF) program.

Use of a fluorescent chemical as a quality indicator for a hospital cleaning program.

PubMed

Blue, Jennifer; O'Neill, Cindy; Speziale, Paul; Revill, Jeff; Ramage, Lee; Ballantyne, Lisa

2008-01-01

Hamilton Health Sciences is a large teaching hospital with over 1,000 beds and consists of three acute care sites, one Regional Cancer Center and two Rehabilitation/Chronic Care facilities. An environmental cleaning pilot project was initiated at the acute care Henderson site, following an outbreak of vancomycin-resistant Enterococcus (VRE). Healthcare-associated infections (HAI) due to antibiotic-resistant organisms are increasing in Southern Ontario. Environmental cleaning plays a key role in eradicating resistant organisms that live in hospital environments, thereby helping to reduce HAIs. The environmental cleaning practices on the Orthopaedic Unit were identified as a contributing factor to the VRE outbreak after visual assessments were completed using a Brevis GlitterBug product, a chemical that fluoresces under an ultraviolet (UV) lamp. These findings led to a hospital-wide cleaning improvement initiative on all units except critical care areas. The GlitterBug potion was employed by Infection Control and Customer Support Services (CSS) as a tool to evaluate the daily cleaning of patient washrooms as well as discharge cleaning of contact precaution isolation rooms. Over a four-week period, the GlitterBug potion was applied to seven frequently touched standard targets in randomly selected patient bathrooms on each unit and 14 frequently touched targets prior to cleaning in the rooms used for isolation. The targets were then evaluated using the UV lamp to detect objects that were not cleaned and the results were recorded on a standardized form. The rate of targets cleaned versus the targets missed was calculated. The overall rate for daily cleaning of bathrooms and cleaning of isolation rooms was poor with only 23% of the targets cleaned. Based on these findings, several interventions were implemented. This resulted in a significant improvement in cleaning practices during the pilot project. Greater than 80% of the targets were cleaned compared to the baseline findings of 23%. Subsequently, nosocomial cases of VRE have declined despite the increased prevalence of VRE in the Hamilton and surrounding regions. The GlitterBug product is an effective tool to evaluate environmental cleaning and adherence to policies and procedures and this method was superior to previous visual inspection methods. The use of GlitterBug potion improved physical cleaning and enhanced staff contribution. The Brevis GlitterBug product was incorporated into the CSS environmental cleaning program at Hamilton Health Sciences as a quality indicator to monitor environmental cleaning practices.

The effect of aerosol-derived changes in the warm phase on the properties of deep convective clouds

NASA Astrophysics Data System (ADS)

Chen, Qian; Koren, Ilan; Altaratz, Orit; Heiblum, Reuven; Dagan, Guy

2017-04-01

The aerosol impact on deep convective clouds starts in an increased number of cloud droplets in higher aerosol loading environment. This change drives many others, like enhanced condensational growth, delay in collision-coalescence and others. Since the warm processes serve as the initial and boundary conditions for the mixed and cold-phase processes in deep clouds, it is highly important to understand the aerosol effect on them. The weather research and forecasting model (WRF) with spectral bin microphysics was used to study a deep convective system over the Marshall Islands, during the Kwajalein Experiment (KWAJEX). Three simulations were conducted with aerosol concentrations of 100, 500 and 2000 cm-3, to reflect clean, semipolluted, and polluted conditions. The results of the clean run agreed well with the radar profiles and rain rate observations. The more polluted simulations resulted in larger total cloud mass, larger upper level cloud fraction and rain rates. There was an increased mass both below and above the zero temperature level. It indicates of more efficient growth processes both below and above the zero level. In addition the polluted runs showed an increased upward transport (across the zero level) of liquid water due to both stronger updrafts and larger droplet mobility. In this work we discuss the transport of cloud mass crossing the zero temperature level (in both directions) in order to gain a process level understanding of how aerosol effects on the warm processes affect the macro- and micro-properties of deep convective clouds.

IMPROVED EQUIPMENT CLEANING IN COATED AND LAMINATED SUBSTRATE MANUFACTURING FACILITIES (PHASE I)

EPA Science Inventory

The report gives results of a Phase I study to characterize current equipment cleaning practices in the coated and laminated substrate manufacturing industry, to identify alternative cleaning technologies, and to identify demonstrable technologies and estimate their emissions imp...

40 CFR 63.803 - Work practice standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... containers for storing finishing, gluing, cleaning, and washoff materials. (h) Application equipment... solvent used for line cleaning into a normally closed container. (j) Gun cleaning. Each owner or operator... closed container. (k) Washoff operations. Each owner or operator of an affected source shall control...

40 CFR 63.803 - Work practice standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... containers for storing finishing, gluing, cleaning, and washoff materials. (h) Application equipment... solvent used for line cleaning into a normally closed container. (j) Gun cleaning. Each owner or operator... closed container. (k) Washoff operations. Each owner or operator of an affected source shall control...

40 CFR 63.803 - Work practice standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... containers for storing finishing, gluing, cleaning, and washoff materials. (h) Application equipment... solvent used for line cleaning into a normally closed container. (j) Gun cleaning. Each owner or operator... closed container. (k) Washoff operations. Each owner or operator of an affected source shall control...

75 FR 82072 - Notice of Lodging of a Consent Decree Under the Clean Water Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... injunctive measures, including the construction of seven deep underground tunnel systems--to reduce its CSO... Decree, may also be examined on the following Department of Justice Web site, to http://www.usdoj.gov...

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) is being moved to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians move the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) into a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians move the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) toward a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Use of fluorescent tagging for assessment of environmental cleaning and disinfection in a veterinary hospital.

PubMed

Weese, J S; Lowe, T; Walker, M

2012-09-01

Environmental cleaning was assessed at a small animal veterinary referral hospital and associated primary healthcare facility. A convenience sample of surfaces was contaminated with fluorescent dye, and then cleaning was assessed 24 hours later by UV light visualisation. Five hundred sixty-three sites were assessed; however, 70 sites were unable to be evaluated 24 hours later because equipment had been removed or because rooms were occupied at the time of re-evaluation. Overall, dye was removed from 212/493 (43%) of sites. Site-specific rates ranged from 14% (computer keyboards and mice, 9/66 site cleaned) to 81% (examination tables, 44/54 sites cleaned). There was a significant difference in the prevalence of successful cleaning by general location (P < 0.0001) and surface type (P < 0.0001). Environmental tagging was an easy and low-cost tool to assess cleaning practices. Results prompted further infection control investigations to explain selected deficiencies, leading to identification of inadequacies in protocols and practices. Environmental tagging may be a useful infection control tool for establishing baseline cleaning rates, identifying deficiencies in protocols, evaluating the effects of interventions and education of personnel.

Ship Fracture Mechanisms Investigation. Part 1

DTIC Science & Technology

1987-01-01

fractography of the fracture origin areas was atteinpted by Pense at Lehigh Univers-ty but in no case were the surfaces sufficiently clean to permit good...Typically, they arc a deprc.sion or notch no more than 0.25 inches deep , and in some cases appear to be even smaller. It was not possible to determine if any...perpendiculars: 880.5 ft Breadth (molded): 105.5 ft Depth amidship: 65.25 ft Displacement ( deep load line): 50,315 LT Year built: 1972 (foreign built

Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions.

PubMed

Jiao, Yan; Zheng, Yao; Jaroniec, Mietek; Qiao, Shi Zhang

2015-04-21

A fundamental change has been achieved in understanding surface electrochemistry due to the profound knowledge of the nature of electrocatalytic processes accumulated over the past several decades and to the recent technological advances in spectroscopy and high resolution imaging. Nowadays one can preferably design electrocatalysts based on the deep theoretical knowledge of electronic structures, via computer-guided engineering of the surface and (electro)chemical properties of materials, followed by the synthesis of practical materials with high performance for specific reactions. This review provides insights into both theoretical and experimental electrochemistry toward a better understanding of a series of key clean energy conversion reactions including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The emphasis of this review is on the origin of the electrocatalytic activity of nanostructured catalysts toward the aforementioned reactions by correlating the apparent electrode performance with their intrinsic electrochemical properties. Also, a rational design of electrocatalysts is proposed starting from the most fundamental aspects of the electronic structure engineering to a more practical level of nanotechnological fabrication.

C&S Enterprise, L.L.C.

EPA Pesticide Factsheets

The EPA is providing notice of a proposed Administrative Penalty Assessment against C & S Enterprise, L.L.C. (“Respondent”), a business located at 2454 480th Ave, Deep River, IA 52222, for alleged violations of the Clean Water Act at property owned by Resp

Researching effective approaches to cleaning in hospitals: protocol of the REACH study, a multi-site stepped-wedge randomised trial.

PubMed

Hall, Lisa; Farrington, Alison; Mitchell, Brett G; Barnett, Adrian G; Halton, Kate; Allen, Michelle; Page, Katie; Gardner, Anne; Havers, Sally; Bailey, Emily; Dancer, Stephanie J; Riley, Thomas V; Gericke, Christian A; Paterson, David L; Graves, Nicholas

2016-03-24

The Researching Effective Approaches to Cleaning in Hospitals (REACH) study will generate evidence about the effectiveness and cost-effectiveness of a novel cleaning initiative that aims to improve the environmental cleanliness of hospitals. The initiative is an environmental cleaning bundle, with five interdependent, evidence-based components (training, technique, product, audit and communication) implemented with environmental services staff to enhance hospital cleaning practices. The REACH study will use a stepped-wedge randomised controlled design to test the study intervention, an environmental cleaning bundle, in 11 Australian hospitals. All trial hospitals will receive the intervention and act as their own control, with analysis undertaken of the change within each hospital based on data collected in the control and intervention periods. Each site will be randomised to one of the 11 intervention timings with staggered commencement dates in 2016 and an intervention period between 20 and 50 weeks. All sites complete the trial at the same time in 2017. The inclusion criteria allow for a purposive sample of both public and private hospitals that have higher-risk patient populations for healthcare-associated infections (HAIs). The primary outcome (objective one) is the monthly number of Staphylococcus aureus bacteraemias (SABs), Clostridium difficile infections (CDIs) and vancomycin resistant enterococci (VRE) infections, per 10,000 bed days. Secondary outcomes for objective one include the thoroughness of hospital cleaning assessed using fluorescent marker technology, the bio-burden of frequent touch surfaces post cleaning and changes in staff knowledge and attitudes about environmental cleaning. A cost-effectiveness analysis will determine the second key outcome (objective two): the incremental cost-effectiveness ratio from implementation of the cleaning bundle. The study uses the integrated Promoting Action on Research Implementation in Health Services (iPARIHS) framework to support the tailored implementation of the environmental cleaning bundle in each hospital. Evidence from the REACH trial will contribute to future policy and practice guidelines about hospital environmental cleaning. It will be used by healthcare leaders and clinicians to inform decision-making and implementation of best-practice infection prevention strategies to reduce HAIs in hospitals. Australia New Zealand Clinical Trial Registry ACTRN12615000325505.

Issues and approaches for ensuring effective communication on acceptable daily exposure (ADE) values applied to pharmaceutical cleaning.

PubMed

Olson, Michael J; Faria, Ellen C; Hayes, Eileen P; Jolly, Robert A; Barle, Ester Lovsin; Molnar, Lance R; Naumann, Bruce D; Pecquet, Alison M; Shipp, Bryan K; Sussman, Robert G; Weideman, Patricia A

2016-08-01

This manuscript centers on communication with key stakeholders of the concepts and program goals involved in the application of health-based pharmaceutical cleaning limits. Implementation of health-based cleaning limits, as distinct from other standards such as 1/1000th of the lowest clinical dose, is a concept recently introduced into regulatory domains. While there is a great deal of technical detail in the written framework underpinning the use of Acceptable Daily Exposures (ADEs) in cleaning (for example ISPE, 2010; Sargent et al., 2013), little is available to explain how to practically create a program which meets regulatory needs while also fulfilling good manufacturing practice (GMP) and other expectations. The lack of a harmonized approach for program implementation and communication across stakeholders can ultimately foster inappropriate application of these concepts. Thus, this period in time (2014-2017) could be considered transitional with respect to influencing best practice related to establishing health-based cleaning limits. Suggestions offered in this manuscript are intended to encourage full and accurate communication regarding both scientific and administrative elements of health-based ADE values used in pharmaceutical cleaning practice. This is a large and complex effort that requires: 1) clearly explaining key terms and definitions, 2) identification of stakeholders, 3) assessment of stakeholders' subject matter knowledge, 4) formulation of key messages fit to stakeholder needs, 5) identification of effective and timely means for communication, and 6) allocation of time, energy, and motivation for initiating and carrying through with communications. Copyright © 2016 Elsevier Inc. All rights reserved.

Transforming Power Systems; 21st Century Power Partnership

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-05-20

The 21st Century Power Partnership - a multilateral effort of the Clean Energy Ministerial - serves as a platform for public-private collaboration to advance integrated solutions for the large-scale deployment of renewable energy in combination with deep energy ef?ciency and smart grid solutions.

Task Inventory Construction

DTIC Science & Technology

1976-06-01

clay coo candy chance clean(er) cook(ed) cane change clear cook(ing) cannon chap clerk cooky (ie)(s) cannot charge clever cool(er) canoe charm...deck donkey deed don’t deep door deer doorbell defeat doorknob defend doorstep defense dope delight dot den double dough dove down

Stethoscope Hygiene: Practice and Attitude of Medical Students.

PubMed

Gazibara, Tatjana; Radovanovic, Sanja; Maric, Gorica; Rancic, Biljana; Kisic-Tepavcevic, Darija; Pekmezovic, Tatjana

2015-01-01

The purpose of this study was to evaluate the frequency and attitude of medical students towards cleaning their stethoscopes. A cross-sectional study was carried out in the first week of December 2013. The study included 771 students (397 in their fourth and 374 in their sixth year) from the Faculty of Medicine, University of Belgrade, Serbia. An anonymous questionnaire was distributed to students before the start of compulsory lessons in classrooms. 317 of the 397 fourth-year students (79.8%) and 306 of the 374 sixth-year students (81.9%) cleaned their stethoscope. The stethoscope diaphragm was most commonly cleaned, while the flexible tubing was the least commonly cleaned area, mainly using ethyl alcohol-based agents. The strongest positive attitude was observed for the statement 'It is important that my stethoscope is clean' (4.3 out of 5.0). A positive correlation (Spearman's x03C1; = 0.105) was observed between a higher frequency of cleaning and the stronger positive notion that a stethoscope should be cleaned. A considerably high proportion of the students studied had ever cleaned their stethoscopes. Based on the students' responses, it would be useful to implement instructions on stethoscope hygiene in the regular practical curriculum with the aim of applying stethoscope disinfection in daily work. © 2015 S. Karger AG, Basel.

Reprocessing anesthesia instruments and devices.

PubMed

Ball, K

2000-02-01

Reprocessing anesthesia instruments and devices can often present a challenge for anesthesia providers because anesthesia devices have become more complex, cross-contamination with disease-forming pathogens can occur, and the importance of appropriate reprocessing may not be fully understood. Based on accepted practice recommendations, regulations, and research, reprocessing must be performed by skilled individuals who understand asepsis, cleaning, disinfection, and sterilization principles. This article describes the art of reprocessing and includes highlighted information on recommended practices, Spaulding's classifications, personal protective attire, precleaning, leak testing of flexible endoscopes, device disassembly, cleaning supplies and solutions, cleaning methods, rinsing, reassembly of the device, inspection, disinfection, and sterilization.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians begin to move the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, Lockheed Martin technicians secure a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a Lockheed Martin technician secures a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians secure a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, a protective cover is installed around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, Lockheed Martin technicians are preparing the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for the move into a clean room. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, Lockheed Martin technicians secure a protective cover around the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) for its move to a clean. The CMA will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Adapter Move to Clean Room

NASA Image and Video Library

2016-11-29

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida, the Orion crew module adapter (CMA) for Exploration Mission 1 (EM-1) is in a clean room with protective walls secured around it. The adapter will undergo propellant and environmental control and life support system tube installation and welding. The adapter will connect the Orion crew module to the European Space Agency-provided service module. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Factors associated with hand hygiene practices in two neonatal intensive care units.

PubMed

Cohen, Bevin; Saiman, Lisa; Cimiotti, Jeannie; Larson, Elaine

2003-06-01

To determine whether hand hygiene practices differ between levels of contact with neonates; to characterize the hand hygiene practices of different types of personnel; and to compare hand hygiene practices in neonatal intensive care units (NICUs) using different products. Research assistants observed staff hand hygiene practices during 38 sessions in two NICUs. Patient touches were categorized as touching within the neonates' environment but only outside the Isolette (Level 1), touching within the Isolette but not the neonate directly (Level 2) or directly touching the neonate (Level 3). Hand hygiene practices for each touch were categorized into five groups: cleaned hands and new gloves; uncleaned hands and new gloves; used gloves; clean hands and no gloves; uncleaned hands and no gloves. Research assistants observed 1472 touches. On average each neonate or his or her immediate environment was touched 78 times per shift. Nurses (P = 0.001), attending physicians (P = 0.02) and physicians-in-training (P = 0.03) were more likely to use appropriate practices during Level 3 touches, but only 22.8% of all touches were with cleaned and/or newly gloved hands. The mean number of direct touches by staff members with cleaned hands was greater in the NICU using an alcohol-based hand rub than in the NICU using antimicrobial soap (P < 0.01). Hand hygiene was suboptimal in this high risk setting; administrative action and improved products may be needed to assure acceptable practice. In this study use of an alcohol-based product was associated with significantly improved hand hygiene and should be encouraged, as recommended in the new CDC hand hygiene guideline.

Telehealth infection control: a movement toward best practice.

PubMed

Suter, Paula; Yueng, Carole; Johnston, Donna; Suter, W Newton

2009-05-01

As healthcare transitions to the home environment, there is an increasing need to prevent and control infections traced to telehealth equipment. Background information about infection control is presented, and the need for a survey of agency cleaning policies is described. Findings from 31 agencies using telehealth equipment are described followed by suggested Best Practice Guidelines for the cleaning of telehealth equipment.

75 FR 49949 - Notice of Lodging of Consent Decree Under The Clean Water Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-16

... DEPARTMENT OF JUSTICE Notice of Lodging of Consent Decree Under The Clean Water Act Notice is... Southern District of Texas. In this action, the United States alleges civil claims under the Clean Water...) improve pipeline operation and integrity management practices, and (3) enhance leak detection capabilities...

Clean Cities: Building Partnerships to Reduce Petroleum Use in Transportation (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-03-01

This fact sheet provides an overview of the U.S. Department of Energy's Clean Cities program, which builds partnerships to reduce petroleum use in transportation in communities across the country. The U.S. Department of Energy's Clean Cities initiative advances the nation's economic, environmental, and energy security by supporting local actions to reduce petroleum consumption in transportation. Clean Cities accomplishes this work through the activities of nearly 100 local coalitions. These coalitions provide resources and technical assistance in the deployment of alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and new transportation technologies, as they emerge. Clean Cities overarching goal ismore » to reduce U.S. petroleum use by 2.5 billion gallons per year by 2020. To achieve this goal, Clean Cities employs three strategies: (1) Replace petroleum with alternative and renewable fuels, including natural gas, propane, electricity, ethanol, biodiesel, and hydrogen; (2) Reduce petroleum consumption through smarter driving practices and fuel economy improvements; and (3) Eliminate petroleum use through idle reduction and other fuel-saving technologies and practices.« less

Bioinspired Multifunctional Paper-Based rGO Composites for Solar-Driven Clean Water Generation.

PubMed

Lou, Jinwei; Liu, Yang; Wang, Zhongyong; Zhao, Dengwu; Song, Chengyi; Wu, Jianbo; Dasgupta, Neil; Zhang, Wang; Zhang, Di; Tao, Peng; Shang, Wen; Deng, Tao

2016-06-15

Reusing polluted water through various decontamination techniques has appeared as one of the most practical approaches to address the global shortage of clean water. Rather than relying on single decontamination mechanism, herein we report the preparation and utilization of paper-based composites for multifunctional solar-driven clean water generation that is inspired by the multiple water purification approaches in biological systems. The reduced graphene oxide (rGO) sheets within such composites can efficiently remove organic contaminants through physical adsorption mechanism. Under solar irradiation, the floating rGO composites can instantly generate localized heating, which not only can directly generate clean water through distillation mechanism but also significantly enhance adsorption removal performance with the assistance of upward vapor flow. Such porous-structured paper-based composites allow for facile incorporation of photocatalysts to regenerate clean water out of contaminated water with combined adsorption, photodegradation, and interfacial heat-assisted distillation mechanisms. Within a homemade all-in-one water treatment device, the practical applicability of the composites for multifunctional clean water generation has been demonstrated.

7 CFR 51.1552 - Clean.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1552 Clean... staining and practically no loose dirt or other foreign matter is present in the container. ...

7 CFR 51.1552 - Clean.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1552 Clean... staining and practically no loose dirt or other foreign matter is present in the container. ...

Infection prevention and control in ultrasound - best practice recommendations from the European Society of Radiology Ultrasound Working Group.

PubMed

Nyhsen, Christiane M; Humphreys, Hilary; Koerner, Roland J; Grenier, Nicolas; Brady, Adrian; Sidhu, Paul; Nicolau, Carlos; Mostbeck, Gerhard; D'Onofrio, Mirko; Gangi, Afshin; Claudon, Michel

2017-12-01

The objective of these recommendations is to highlight the importance of infection prevention and control in ultrasound (US), including diagnostic and interventional settings. Review of available publications and discussion within a multidisciplinary group consistent of radiologists and microbiologists, in consultation with European patient and industry representatives. Good basic hygiene standards are essential. All US equipment must be approved prior to first use, including hand held devices. Any equipment in direct patient contact must be cleaned and disinfected prior to first use and after every examination. Regular deep cleaning of the entire US machine and environment should be undertaken. Faulty transducers should not be used. As outlined in presented flowcharts, low level disinfection is sufficient for standard US on intact skin. For all other minor and major interventional procedures as well as all endo-cavity US, high level disinfection is mandatory. Dedicated transducer covers must be used when transducers are in contact with mucous membranes or body fluids and sterile gel should be used inside and outside covers. Good standards of basic hygiene and thorough decontamination of all US equipment as well as appropriate use of US gel and transducer covers are essential to keep patients safe. • Transducers must be cleaned/disinfected before first use and after every examination. • Low level disinfection is sufficient for standard US on intact skin. • High level disinfection is mandatory for endo-cavity US and all interventions. • Dedicated transducer covers must be used for endo-cavity US and all interventions. • Sterile gel should be used for all endo-cavity US and all interventions.

[Assessment of decontamination processes: cleaning, disinfection and sterilization in dental practice in Poland in the years 2011-2012].

PubMed

Röhm-Rodowald, Ewa; Jakimiak, Bozenna; Chojecka, Agnieszka; Zmuda-Baranowska, Magdalena; Kanclerski, Krzysztof

2012-01-01

Effective decontamination of instruments is a key element of infection control and the provision of high quality in dental care. The aim of the study was to evaluate the efficiency of decontamination procedures including cleaning, disinfection and sterilization of re-usable instruments in dental practices in Poland. The efficiency of disinfection and sterilization processes have been evaluated on the results of the questionnaires. The following information were taken into account: setting where disinfection and sterilization had been performed, preparation of dental equipment for sterilization (disinfection, washing and cleaning, packaging), the types of autoclaves and used types of sterilization cycles, routine monitoring and documentation of sterilization processes, treatment of handpieces and the frequency of surface decontamination. Data were collected from 43 dental practices (35 dental offices and 8 clinics). Disinfection and cleaning processes were performed manually in 63% of dental offices and ultrasonic baths were used in 53% of settings. Washer disinfectors were used in 23% of dental practices: in every researched clinic and in a few dental offices. All sterilization processes were performed in steam autoclaves, mainly in small steam sterilizers (81%). Dental handpieces were sterilized in 72% of practices, but only 33% of them performed sterilization in recommended cycle B. Sterilization processes were monitored with chemical indicators in 33% of practices. Biological monitoring of the processes was carried out at different intervals. Incorrect documentation of instruments and surfaces decontamination was recorded in several settings. There is still a need for improvement of decontamination processes in dental practice in Poland. Areas for improvement include: replacement of manual cleaning and disinfection processes with automatic processes, sterilization of dental handpieces after each patient, monitoring of a sterilization process with chemical and biological indicators. Reported incorrect procedures in decontamination of medical devices performed by questioned dentists and lack or inadequate response to asked questions indicate the lack of adequate knowledge about decontamination. Personnel who performs decontamination processes should be continuously trained.

About the Clean Boating Act (CBA)

EPA Pesticide Factsheets

Provides a description of the Clean Boating Act using frequently asked questions (FAQs) about the background, scope and implementation of the amendment. The page also discusses compliance questions and best management practices.

Cleaning frequency and the microbial load in ice-cream.

PubMed

Holm, Sonya; Toma, Ramses B; Reiboldt, Wendy; Newcomer, Chris; Calicchia, Melissa

2002-07-01

This study investigates the efficacy of a 62 h cleaning frequency in the manufacturing of ice-cream. Various product and product contact surfaces were sampled progressively throughout the time period between cleaning cycles, and analyzed for microbial growth. The coliform and standard plate counts (SPC) of these samples did not vary significantly over time after 0, 24, 48, or 62 h from Cleaning in Place (CiP). Data for product contact surfaces were significant for the SPC representing sample locations. Some of the variables in cleaning practices had significant influence on microbial loads. An increase in the number of flavors manufactured caused a decrease in SPC within the 24 h interval, but by the 48 h interval the SPC increased. More washouts within the first 24 h interval were favorable, as indicated by decreased SPC. The more frequently the liquefier was sanitized within the 62 h interval, the lower the SPC. This study indicates that food safety was not compromised and safety practices were effectively implemented throughout the process.

Multiple Information Failure: A Case of Different Investments in Form and Content in Graphic Design

ERIC Educational Resources Information Center

Barnes, Carolyn; Taffe, Simone; Miceli, Lucy

2009-01-01

This paper considers a sequence of failures in the design of information. It focuses on the Safe and Sustainable Indoor Cleaning study (SASI Clean), a 2007 government-funded study into cleaning practices in Australian childcare centers. Empowerment through participation was integral to the study, childcare workers being seen as collaborators in…

Qualifications of Bonding Process of Temperature Sensors to Deep-Space Missions

NASA Technical Reports Server (NTRS)

Ramesham, Rajeshuni; Kitiyakara, Amarit; Redick, Richard W., III; Sunada, Eric T.

2011-01-01

A process has been examined for bonding a platinum resistance thermometer (PRT) onto potential aerospace materials such as flat aluminum surfaces and a flexible copper tube to simulate coaxial cables for flight applications. Primarily, PRTs were inserted into a silver-plated copper braid to avoid stresses on the sensor while the sensor was attached with the braid to the base material for long-duration, deep-space missions. A1-1145/graphite composite (planar substrate) and copper tube have been used in this study to assess the reliability of PRT bonding materials. A flexible copper tube was chosen to simulate the coaxial cable to attach PRTs. The substrate materials were cleaned with acetone wipes to remove oils and contaminants. Later, the surface was also cleaned with ethyl alcohol and was air-dried. The materials were gently abraded and then were cleaned again the same way as previously mentioned. Initially, shielded (silver plated copper braid) PRT (type X) test articles were fabricated and cleaned. The base antenna material was pretreated and shielded, and CV-2566 NuSil silicone was used to attach the shielded PRT to the base material. The test articles were cured at room temperature and humidity for seven days. The resistance of the PRTs was continuously monitored during the thermal cycling, and the test articles were inspected prior to, at various intermediate steps during, and at the end of the thermal cycling as well. All of the PRTs survived three times the expected mission life for the JUNO project. No adhesion problems were observed in the PRT sensor area, or under the shielded PRT. Furthermore, the PRT resistance accurately tracked the thermal cycling of the chamber.

Clean Air Act, TRI drive emission reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heller, K.

1994-06-22

When asked to rank priority environmental engineering projects, many chemical firms put emissions reduction first. The chief motivators are the need to comply with rules governing major sources of hazardous air pollutants (HAPS) under the Clean Air Act Amendments of 1990 (CAA), along with the need to reduce the volumes of chemicals on EPA`s Toxics Release Inventory (TRI). Deep-welling of toxics is getting special attention as the practice adds considerably to TRI numbers. {open_quotes}We want to eliminate our air toxics so that we can get entirely out of the [CAA] Maximum Achievable Control Technology (MACT) requirements,{close_quotes} says Thomas Zosel, manager/pollutionmore » prevention programs for 3M (St. Paul, MN). He estimates that 3M`s 1993 total research expenditures for environmental improvements were at least $200 million, out of an annual research budget of a little more than $1 billion. And, he says, the spending level is not expected to drop. Among its many efforts, 3M is striving to move away from solvents in all of its processes. To help reach that goal, the company developed a {open_quotes}waste measurement metric{close_quotes} that calculates the wastes produced by each of the company`s 50 operating divisions. In the case of Magic Tape, the company eliminated solvent emission by switching to a water-based adhesive that does not require a solvent.« less

DeepSAGE Based Differential Gene Expression Analysis under Cold and Freeze Stress in Seabuckthorn (Hippophae rhamnoides L.)

PubMed Central

Chaudhary, Saurabh; Sharma, Prakash C.

2015-01-01

Seabuckthorn (Hippophae rhamnoides L.), an important plant species of Indian Himalayas, is well known for its immense medicinal and nutritional value. The plant has the ability to sustain growth in harsh environments of extreme temperatures, drought and salinity. We employed DeepSAGE, a tag based approach, to identify differentially expressed genes under cold and freeze stress in seabuckthorn. In total 36.2 million raw tags including 13.9 million distinct tags were generated using Illumina sequencing platform for three leaf tissue libraries including control (CON), cold stress (CS) and freeze stress (FS). After discarding low quality tags, 35.5 million clean tags including 7 million distinct clean tags were obtained. In all, 11922 differentially expressed genes (DEGs) including 6539 up regulated and 5383 down regulated genes were identified in three comparative setups i.e. CON vs CS, CON vs FS and CS vs FS. Gene ontology and KEGG pathway analysis were performed to assign gene ontology term to DEGs and ascertain their biological functions. DEGs were mapped back to our existing seabuckthorn transcriptome assembly comprising of 88,297 putative unigenes leading to the identification of 428 cold and freeze stress responsive genes. Expression of randomly selected 22 DEGs was validated using qRT-PCR that further supported our DeepSAGE results. The present study provided a comprehensive view of global gene expression profile of seabuckthorn under cold and freeze stresses. The DeepSAGE data could also serve as a valuable resource for further functional genomics studies aiming selection of candidate genes for development of abiotic stress tolerant transgenic plants. PMID:25803684

DeepSAGE based differential gene expression analysis under cold and freeze stress in seabuckthorn (Hippophae rhamnoides L.).

PubMed

Chaudhary, Saurabh; Sharma, Prakash C

2015-01-01

Seabuckthorn (Hippophae rhamnoides L.), an important plant species of Indian Himalayas, is well known for its immense medicinal and nutritional value. The plant has the ability to sustain growth in harsh environments of extreme temperatures, drought and salinity. We employed DeepSAGE, a tag based approach, to identify differentially expressed genes under cold and freeze stress in seabuckthorn. In total 36.2 million raw tags including 13.9 million distinct tags were generated using Illumina sequencing platform for three leaf tissue libraries including control (CON), cold stress (CS) and freeze stress (FS). After discarding low quality tags, 35.5 million clean tags including 7 million distinct clean tags were obtained. In all, 11922 differentially expressed genes (DEGs) including 6539 up regulated and 5383 down regulated genes were identified in three comparative setups i.e. CON vs CS, CON vs FS and CS vs FS. Gene ontology and KEGG pathway analysis were performed to assign gene ontology term to DEGs and ascertain their biological functions. DEGs were mapped back to our existing seabuckthorn transcriptome assembly comprising of 88,297 putative unigenes leading to the identification of 428 cold and freeze stress responsive genes. Expression of randomly selected 22 DEGs was validated using qRT-PCR that further supported our DeepSAGE results. The present study provided a comprehensive view of global gene expression profile of seabuckthorn under cold and freeze stresses. The DeepSAGE data could also serve as a valuable resource for further functional genomics studies aiming selection of candidate genes for development of abiotic stress tolerant transgenic plants.

Cleaning and other control and validation strategies to prevent allergen cross-contact in food-processing operations.

PubMed

Jackson, Lauren S; Al-Taher, Fadwa M; Moorman, Mark; DeVries, Jonathan W; Tippett, Roger; Swanson, Katherine M J; Fu, Tong-Jen; Salter, Robert; Dunaif, George; Estes, Susan; Albillos, Silvia; Gendel, Steven M

2008-02-01

Food allergies affect an estimated 10 to 12 million people in the United States. Some of these individuals can develop life-threatening allergic reactions when exposed to allergenic proteins. At present, the only successful method to manage food allergies is to avoid foods containing allergens. Consumers with food allergies rely on food labels to disclose the presence of allergenic ingredients. However, undeclared allergens can be inadvertently introduced into a food via cross-contact during manufacturing. Although allergen removal through cleaning of shared equipment or processing lines has been identified as one of the critical points for effective allergen control, there is little published information on the effectiveness of cleaning procedures for removing allergenic materials from processing equipment. There also is no consensus on how to validate or verify the efficacy of cleaning procedures. The objectives of this review were (i) to study the incidence and cause of allergen cross-contact, (ii) to assess the science upon which the cleaning of food contact surfaces is based, (iii) to identify best practices for cleaning allergenic foods from food contact surfaces in wet and dry manufacturing environments, and (iv) to present best practices for validating and verifying the efficacy of allergen cleaning protocols.

Stethoscope Hygiene: Practice and Attitude of Medical Students

PubMed Central

Gazibara, Tatjana; Radovanovic, Sanja; Maric, Gorica; Rancic, Biljana; Kisic-Tepavcevic, Darija; Pekmezovic, Tatjana

2015-01-01

Objective The purpose of this study was to evaluate the frequency and attitude of medical students towards cleaning their stethoscopes. Subjects and Methods A cross-sectional study was carried out in the first week of December 2013. The study included 771 students (397 in their fourth and 374 in their sixth year) from the Faculty of Medicine, University of Belgrade, Serbia. An anonymous questionnaire was distributed to students before the start of compulsory lessons in classrooms. Results 317 of the 397 fourth-year students (79.8%) and 306 of the 374 sixth-year students (81.9%) cleaned their stethoscope. The stethoscope diaphragm was most commonly cleaned, while the flexible tubing was the least commonly cleaned area, mainly using ethyl alcohol-based agents. The strongest positive attitude was observed for the statement ‘It is important that my stethoscope is clean’ (4.3 out of 5.0). A positive correlation (Spearman's ρ = 0.105) was observed between a higher frequency of cleaning and the stronger positive notion that a stethoscope should be cleaned. Conclusion A considerably high proportion of the students studied had ever cleaned their stethoscopes. Based on the students' responses, it would be useful to implement instructions on stethoscope hygiene in the regular practical curriculum with the aim of applying stethoscope disinfection in daily work. PMID:26202790

Kinematic and kinetic improvements associated with action observation facilitated learning of the power clean in Australian footballers.

PubMed

Sakadjian, Alex; Panchuk, Derek; Pearce, Alan J

2014-06-01

This study investigated the effectiveness of action observation (AO) on facilitating learning of the power clean technique (kinematics) compared with traditional strength coaching methods and whether improvements in performance (kinetics) were associated with an improvement in lifting technique. Fifteen subjects (age, 20.9 ± 2.3 years) with no experience in performing the power clean exercise attended 12 training and testing sessions over a 4-week period. Subjects were assigned to 2 matched groups, based on preintervention power clean performance and performed 3 sets of 5 repetitions of the power clean exercise at each training session. Subjects in the traditional coaching group (TC; n = 7) received the standard coaching feedback (verbal cues and physical practice), whereas subjects in the AO group (n = 8) received similar verbal coaching cues and physical practice but also observed a video of a skilled model before performing each set. Kinematic data were collected from video recordings of subjects who were fitted with joint center markings during testing, whereas kinetic data were collected from a weightlifting analyzer attached to the barbell. Subjects were tested before intervention, at the end of weeks 2 and 3, and at after intervention at the end of week 4. Faster improvements (3%) were observed in power clean technique with AO-facilitated learning in the first week and performance improvements (mean peak power of the subject's 15 repetitions) over time were significant (p < 0.001). In addition, performance improvement was significantly associated (R = 0.215) with technique improvements. In conclusion, AO combined with verbal coaching and physical practice of the power clean exercise resulted in significantly faster technique improvements and improvement in performance compared with traditional coaching methods.

Understanding Barriers to Optimal Cleaning and Disinfection in Hospitals: A Knowledge, Attitudes, and Practices Survey of Environmental Services Workers.

PubMed

Bernstein, Daniel A; Salsgiver, Elizabeth; Simon, Matthew S; Greendyke, William; Eiras, Daniel P; Ito, Masahiro; Caruso, Dean A; Woodward, Timothy M; Perriel, Odette T; Saiman, Lisa; Furuya, E Yoko; Calfee, David P

2016-12-01

In this study, we used an online survey to assess knowledge, attitudes, and practices related to environmental cleaning and other infection prevention strategies among environmental services workers (ESWs) at 5 hospitals. Our findings suggest that ESWs could benefit from additional education and feedback as well as new strategies to address workflow challenges. Infect Control Hosp Epidemiol 2016;1492-1495.

Prevention and control practices for human noroviruses in long-term care facilities in South Carolina.

PubMed

Leone, Cortney M; Jayasekara, Lalani; Sharp, Julia; Fraser, Angela

2015-12-01

Long-term care facilities (LTCFs) are the most common setting for human norovirus (HuNoV) outbreak. Our study aimed to determine gaps in prevention and control practices for HuNoV in LTCFs in South Carolina (SC). Two researchers visited a convenience sample of 26 LTCFs in SC during July-November 2013. Directors were interviewed to determine facility prevention and control practices. Relative frequencies and means were calculated using SAS 9.3 (SAS Institute, Cary, NC). Most directors had little knowledge of proper sanitizing and disinfecting products and reported missing written procedures for cleaning staff-visitor bathrooms. Only 18 had recommendations for when residents should wash hands. Many used the wrong products for pathogen removal after vomit-fecal events, had no written procedures for cleaning contaminated soft surfaces, did not remove other individuals during clean-up of vomit-fecal episodes, and did not clean a large area surrounding vomit-fecal episodes. Eighteen did not assign specific staff to care for sick; 16 did not designate specific toilets for sick; and 15 did not restrict visitors during an outbreak. Directors' responses indicated gaps in prevention and control practices for HuNoV in LTCFs in SC. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Clean Room in the Zero Gravity Research Facility

NASA Image and Video Library

1968-07-21

A technician prepares a test sample in the Zero Gravity Research Facility clean room at the National Aeronautics and Space Administration (NASA) Lewis Research Center. The Zero Gravity Research Facility contained a drop tower which provided five seconds of microgravity during freefall in its 450-foot deep vacuum chamber. The facility has been used for a variety of studies relating to the behavior of fluids and flames in microgravity. During normal operations, a cylindrical 3-foot diameter and 11-foot long vehicle was used to house the experiments, instrumentation, and high speed cameras. The 4.5-foot long and 1.5-foot wide rectangular vehicle, seen in this photograph, was used less frequently. A 3-foot diameter orb was used for the special ten-second drops in which the package was pneumatically shot to the top of the tower then dropped. The facility also contained a control room, shop offices, tool and equipment rooms, and this clean room. The 242.5-foot long and 19.5-foot wide clean room was equipped with specialized cleaning equipment. In the 1960s the room was rated as a class 10,000 clean room, but I was capable of meeting the class 100 requirements. The room included a fume hood, ultrasonic cleaner, and a laminar flow station which operated as a class 100 environment. The environment in the clean room was maintained at 71° F and a relative humidity of 45- percent.

Reduction of Clostridium Difficile and vancomycin-resistant Enterococcus contamination of environmental surfaces after an intervention to improve cleaning methods

PubMed Central

Eckstein, Brittany C; Adams, Daniel A; Eckstein, Elizabeth C; Rao, Agam; Sethi, Ajay K; Yadavalli, Gopala K; Donskey, Curtis J

2007-01-01

Background Contaminated environmental surfaces may play an important role in transmission of some healthcare-associated pathogens. In this study, we assessed the adequacy of cleaning practices in rooms of patients with Clostridium difficile-associated diarrhea (CDAD) and vancomycin-resistant Enterococcus (VRE) colonization or infection and examined whether an intervention would result in improved decontamination of surfaces. Methods During a 6-week period, we cultured commonly touched surfaces (i.e. bedrails, telephones, call buttons, door knobs, toilet seats, and bedside tables) in rooms of patients with CDAD and VRE colonization or infection before and after housekeeping cleaning, and again after disinfection with 10% bleach performed by the research staff. After the housekeeping staff received education and feedback, additional cultures were collected before and after housekeeping cleaning during a 10-week follow-up period. Results Of the 17 rooms of patients with VRE colonization or infection, 16 (94%) had one or more positive environmental cultures before cleaning versus 12 (71%) after housekeeping cleaning (p = 0.125), whereas none had positive cultures after bleach disinfection by the research staff (p < 0.001). Of the 9 rooms of patients with CDAD, 100% had positive cultures prior to cleaning versus 7 (78%) after housekeeping cleaning (p = 0.50), whereas only 1 (11%) had positive cultures after bleach disinfection by research staff (p = 0.031). After an educational intervention, rates of environmental contamination after housekeeping cleaning were significantly reduced. Conclusion Our findings provide additional evidence that simple educational interventions directed at housekeeping staff can result in improved decontamination of environmental surfaces. Such interventions should include efforts to monitor cleaning and disinfection practices and provide feedback to the housekeeping staff. PMID:17584935

46 CFR 167.45-1 - Steam, carbon dioxide, Halon 1301, and clean agent fire extinguishing systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... holds, paint lockers, and similar spaces. However, although existing steam smothering systems may be... to each cargo-oil deep tank, lamp locker, oil room, and like compartments, which lamp locker, oil... lamp lockers, oil rooms, and like compartments may be taken from the nearest steam supply line...

46 CFR 167.45-1 - Steam, carbon dioxide, Halon 1301, and clean agent fire extinguishing systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... holds, paint lockers, and similar spaces. However, although existing steam smothering systems may be... to each cargo-oil deep tank, lamp locker, oil room, and like compartments, which lamp locker, oil... lamp lockers, oil rooms, and like compartments may be taken from the nearest steam supply line...

46 CFR 167.45-1 - Steam, carbon dioxide, Halon 1301, and clean agent fire extinguishing systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... holds, paint lockers, and similar spaces. However, although existing steam smothering systems may be... to each cargo-oil deep tank, lamp locker, oil room, and like compartments, which lamp locker, oil... lamp lockers, oil rooms, and like compartments may be taken from the nearest steam supply line...

Advanced coal conversion process demonstration. Technical progress report for the period July 1, 1995--September 30, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-05-01

This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from July 1, 1995 through September 30, 1995. The ACCP Demonstration Project is a US Department of Energy (DOE) Clean Coal Technology Project. This project demonstrates an advanced, thermal, coal upgrading process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, andmore » volatile sulfur compounds. After thermal upgrading, the cola is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal.« less

Practice It: Deep Conscious Breathing Exercise

Cancer.gov

No time to sit and breathe? No problem; take your breathing practice with you! Deep conscious breathing can also be done with the eyes open wherever you happen to be—simply pause and take two to three full deep breaths (inhale deeply and exhale completely).

Effectiveness of granite cleaning procedures in cultural heritage: A review.

PubMed

Pozo-Antonio, J S; Rivas, T; López, A J; Fiorucci, M P; Ramil, A

2016-11-15

Most of the Cultural Heritage built in NW Iberian Peninsula is made of granite which exposition to the environment leads to the formation of deposits and coatings, mainly two types: biological colonization and sulphated black crusts. Nowadays, another form of alteration derives from graffiti paints when these are applied as an act of vandalism. A deep revision needs to be addressed considering the severity of these deterioration forms on granite and the different cleaning effectiveness achieved by cleaning procedures used to remove them. The scientific literature about these topics on granite is scarcer than on sedimentary carbonate stones and marbles, but the importance of the granite in NW Iberian Peninsula Cultural Heritage claims this review centred on biological colonization, sulphated black crusts and graffiti on granite and their effectiveness of the common cleaning procedures. Furthermore, this paper carried out a review of the knowledge about those three alteration forms on granite, as well as bringing together all the major studies in the field of the granite cleaning with traditional procedures (chemical and mechanical) and with the recent developed technique based on the laser ablation. Findings concerning the effectiveness evaluation of these cleaning procedures, considering the coating extraction ability and the damage induced on the granite surface, are described. Finally, some futures research lines are pointed out. Copyright © 2016 Elsevier B.V. All rights reserved.

40 CFR 22.38 - Supplemental rules of practice governing the administrative assessment of civil penalties under...

Code of Federal Regulations, 2012 CFR

2012-07-01

... governing the administrative assessment of civil penalties under the Clean Water Act. 22.38 Section 22.38... of civil penalties under the Clean Water Act. (a) Scope. This section shall apply, in conjunction... penalty under section 309(g) or section 311(b)(6) of the Clean Water Act (“CWA”)(33 U.S.C. 1319(g) and...

40 CFR 22.38 - Supplemental rules of practice governing the administrative assessment of civil penalties under...

Code of Federal Regulations, 2010 CFR

2010-07-01

... governing the administrative assessment of civil penalties under the Clean Water Act. 22.38 Section 22.38... of civil penalties under the Clean Water Act. (a) Scope. This section shall apply, in conjunction... penalty under section 309(g) or section 311(b)(6) of the Clean Water Act (“CWA”)(33 U.S.C. 1319(g) and...

40 CFR 22.38 - Supplemental rules of practice governing the administrative assessment of civil penalties under...

Code of Federal Regulations, 2014 CFR

2014-07-01

... governing the administrative assessment of civil penalties under the Clean Water Act. 22.38 Section 22.38... of civil penalties under the Clean Water Act. (a) Scope. This section shall apply, in conjunction... penalty under section 309(g) or section 311(b)(6) of the Clean Water Act (“CWA”)(33 U.S.C. 1319(g) and...

40 CFR 22.38 - Supplemental rules of practice governing the administrative assessment of civil penalties under...

Code of Federal Regulations, 2011 CFR

2011-07-01

... governing the administrative assessment of civil penalties under the Clean Water Act. 22.38 Section 22.38... of civil penalties under the Clean Water Act. (a) Scope. This section shall apply, in conjunction... penalty under section 309(g) or section 311(b)(6) of the Clean Water Act (“CWA”)(33 U.S.C. 1319(g) and...

Evaluation of knowledge, practices, and possible barriers among healthcare providers regarding medical waste management in Dhaka, Bangladesh.

PubMed

Sarker, Mohammad Abul Bashar; Harun-Or-Rashid, Md; Hirosawa, Tomoya; Abdul Hai, Md Shaheen Bin; Siddique, Md Ruhul Furkan; Sakamoto, Junichi; Hamajima, Nobuyuki

2014-12-09

Improper handling of medical wastes, which is common in Bangladesh, could adversely affect the hospital environment and community at large, and poses a serious threat to public health. We aimed to assess the knowledge and practices regarding medical waste management (MWM) among healthcare providers (HCPs) and to identify possible barriers related to it. A cross-sectional study was carried out during June to September, 2012 including 1 tertiary, 3 secondary, and 3 primary level hospitals in Dhaka division, Bangladesh through 2-stage cluster sampling. Data were collected from 625 HCPs, including 245 medical doctors, 220 nurses, 44 technologists, and 116 cleaning staff who were directly involved in MWM using a self-administered (researcher-administered for cleaning staff), semi-structured questionnaire. Nearly one-third of medical doctors and nurses and two-thirds of technologists and cleaning staff had inadequate knowledge, and about half of medical doctors (44.0%) and cleaning staff (56.0%) had poor practices. HCPs without prior training on MWM were more likely to have poor practices compared to those who had training. Lack of personal protective equipment, equipment for final disposal, MWM-related staff, proper policy/guideline, and lack of incinerator were identified as the top 5 barriers. Strengthening and expansion of ongoing educational programs/training is necessary to improve knowledge and practices regarding MWM. The government should take necessary steps and provide financial support to eliminate the possible barriers related to proper MWM.

Chinese Herbal Medicine Image Recognition and Retrieval by Convolutional Neural Network

PubMed Central

Sun, Xin; Qian, Huinan

2016-01-01

Chinese herbal medicine image recognition and retrieval have great potential of practical applications. Several previous studies have focused on the recognition with hand-crafted image features, but there are two limitations in them. Firstly, most of these hand-crafted features are low-level image representation, which is easily affected by noise and background. Secondly, the medicine images are very clean without any backgrounds, which makes it difficult to use in practical applications. Therefore, designing high-level image representation for recognition and retrieval in real world medicine images is facing a great challenge. Inspired by the recent progress of deep learning in computer vision, we realize that deep learning methods may provide robust medicine image representation. In this paper, we propose to use the Convolutional Neural Network (CNN) for Chinese herbal medicine image recognition and retrieval. For the recognition problem, we use the softmax loss to optimize the recognition network; then for the retrieval problem, we fine-tune the recognition network by adding a triplet loss to search for the most similar medicine images. To evaluate our method, we construct a public database of herbal medicine images with cluttered backgrounds, which has in total 5523 images with 95 popular Chinese medicine categories. Experimental results show that our method can achieve the average recognition precision of 71% and the average retrieval precision of 53% over all the 95 medicine categories, which are quite promising given the fact that the real world images have multiple pieces of occluded herbal and cluttered backgrounds. Besides, our proposed method achieves the state-of-the-art performance by improving previous studies with a large margin. PMID:27258404

Cross-sectional study of frequency and factors associated with stethoscope cleaning among medical practitioners in Pakistan.

PubMed

Hyder, O

2012-07-01

Stethoscope diaphragms are frequently colonized by bacteria. This cross-sectional study described the frequency and factors associated with reporting ever cleaning stethoscopes among 408 medical students and doctors at a medical college and 2 teaching hospitals in Rawalpindi, Pakistan. A minority of the respondents (37.7%) reported having ever cleaned their stethoscope. Following normal clinical use, wiping with a dry cloth was the most frequently reported method of cleaning (53.2%). After contamination of the diaphragm with blood or secretions, cleaning with an alcoholic swab was the most common method (64.3%). In univariate and multivariate analyses, history of receiving information on stethoscope cleaning, utilization of personal stethoscope at last use and affiliation with internal medicine department were factors strongly associated with ever cleaning of stethoscope. Future research for improving stethoscope cleaning practices should explore educational interventions aimed at health care professionals.

Analysis of Low-Biomass Microbial Communities in the Deep Biosphere.

PubMed

Morono, Y; Inagaki, F

2016-01-01

Over the past few decades, the subseafloor biosphere has been explored by scientific ocean drilling to depths of about 2.5km below the seafloor. Although organic-rich anaerobic sedimentary habitats in the ocean margins harbor large numbers of microbial cells, microbial populations in ultraoligotrophic aerobic sedimentary habitats in the open ocean gyres are several orders of magnitude less abundant. Despite advances in cultivation-independent molecular ecological techniques, exploring the low-biomass environment remains technologically challenging, especially in the deep subseafloor biosphere. Reviewing the historical background of deep-biosphere analytical methods, the importance of obtaining clean samples and tracing contamination, as well as methods for detecting microbial life, technological aspects of molecular microbiology, and detecting subseafloor metabolic activity will be discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

The effect of normal pulsed Nd-YAG laser irradiation on pits and fissures in human teeth.

PubMed

Bahar, A; Tagomori, S

1994-01-01

The effects of normal pulsed Nd-YAG laser irradiation on the acid resistance of human dental enamel of pits and fissures, the cleaning of the pit and fissure contents and fluoride uptake into deep pits and fissures were examined. The acid resistance of the pit and fissure enamel was evaluated by the amount of dissolved calcium per square millimeter of the surface area. The pit and fissure enamel treated with laser irradiation obtained an acid resistance 30% higher than that of the unlased controls. The cleaning effect of laser irradiation on the pit and fissure contents was compared with chemicomechanical and mechanical methods. The laser irradiation was found to clean the pits and fissures to a greater depth without alterating the shape of pits and fissures, compared with the other two methods. The distribution of calcium, phosphorus and fluoride in the enamel of the pits and fissures was then measured by electron probe microanalyzer. At the entrance and in the deep part of the pits and fissures, the fluoride content of the enamel treated with acidulated phosphate fluoride after laser irradiation was higher than that of the enamel treated with acidulated phosphate fluoride alone. These results thus suggest that Nd-YAG laser irradiation might be effective in increasing the acid resistance of the pit and fissure enamel, while removing the pit and fissure debris contents and increasing the fluoride uptake into the pit and fissure enamel.

Agenda and Presentations from Circumpolar Workshop: Transport and Clean Air

EPA Pesticide Factsheets

EPA and its partners convened Transport and Clean Air, a Circumpolar Workshop held in December 2013. This seminar allowed leading experts to share best practices on reducing emissions of particulates and black carbon from diesel sources in the Arctic.

7 CFR 51.314 - Clean.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples Definitions § 51.314 Clean. “Clean” means that the apples are free from...

Clean Water Act Section 404(q):Memorandum of Agreement

EPA Pesticide Factsheets

A memorandum of agreement between EPA and the Army Corps of Engineers to minimize, to the maximum extent practicable, duplication, needless paperwork and delays in the issuance of permits related to Section 404(q) of the Clean Water Act.

The applied technologies to access clean water for remote communities

NASA Astrophysics Data System (ADS)

Rabindra, I. B.

2018-01-01

A lot of research is done to overcome the remote communities to access clean water, yet very little is utilized and implemented by the community. Various reasons can probably be made for, which is the application of research results is assessed less practical. The aims of this paper is seeking a practical approach, how to establish criteria for the design can be easier applied, at the proper locations, the simple construction, effectively producing a volume and quality of clean water designation. The methods used in this paper is a technological model assessment of treatment/filtering clean water produced a variety of previous research, to establish a model of appropriate technology for remote communities. Various research results collected from the study of literature, while the identification of opportunities and threats to its application is done using a SWOT analysis. This article discussion is looking for alternative models of clean water filtration technology from the previous research results, to be selected as appropriate technology, easily applied and bring of many benefits to the remote communities. The conclusions resulting from the discussion in this paper, expected to be used as the basic criteria of design model of clean water filtration technologies that can be accepted and applied effectively by the remote communities.

Antibiotic prophylaxis audit and questionnaire study: Traffic Light Poster improves adherence to protocol in gastrointestinal surgery.

PubMed

Cameron, Michaella; Jones, Stacey; Adedeji, Olufunso

2015-07-01

To measure adherence to antibiotic prophylaxis (AP) protocol amongst surgeons and anesthetists and explore their understanding of AP prescribing in practice. A prospective audit of AP in gastrointestinal surgery and re-audit after intervention. A questionnaire survey of practice. 58 (38%- clean; 62%- clean contaminated) operations were audited and 73 (48%-clean; 51%-clean contaminated) operations were re-audited after intervention with "Traffic Light Poster" (TFP) .55 colleagues (32 consultants and 23 trainees) were recruited for questionnaire survey in three West Midlands hospitals. Audit and Re-Audits. Only 31% of procedures followed the protocol correctly in the initial audit and this increased to 73% in the re-audit. 73% of patients undergoing clean procedures received AP inappropriately in the initial audit but reduced significantly to 20% (p < 0.002) in the re-audit. In the initial audit, 62% of clean contaminated procedures did not receive the appropriate first line AP but this fell to 35% (p < 0.05) in the re-audit. Questionnaire Survey- Only 30% of respondents would not give AP in clean surgery as recommended. 45% would use appropriate AP for clean-contaminated wounds. 73% of respondents will give AP at induction, 20% 1 h pre op and 7% just before incision. There is poor compliance with AP protocols in gastrointestinal surgery in part due to general lack of awareness. An educational intervention in the form of a 'Traffic Light Poster' improved adherence to AP protocol two fold. There was improved rationalizing of AP. Clean procedures, in particular, had less inappropriate prescribing. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Assessment of the Natural Attenuation of NAPL Source Zones and Post-Treatment NAPL Source Zone Residuals

DTIC Science & Technology

2013-11-15

was conducted. As expected, a cylinder was formed similar to the one shown in Figure 5.9 using potassium permanganate , with slight elongation in the...clean water injections at 400 mg/L. This was not necessary during the ISCO disturbance test, as potassium permanganate (KMnO4), which forms a deep

Bringing Catalysis with Gold Nanoparticles in Green Solvents to Graduate Level Students

ERIC Educational Resources Information Center

Raghuwanshi, Vikram Singh; Wendt, Robert; O'Neill, Maeve; Ochmann, Miguel; Som, Tirtha; Fenger, Robert; Mohrmann, Marie; Hoell, Armin; Rademann, Klaus

2017-01-01

We demonstrate here a novel laboratory experiment for the synthesis of gold nanoparticles (AuNPs) by using a low energy gold-sputtering method together with a modern, green, and biofriendly deep eutectic solvent (DES). The strategy is straightforward, economical, ecofriendly, rapid, and clean. It yields uniform AuNPs of 5 nm in diameter with high…

APSIC Guidelines for environmental cleaning and decontamination.

PubMed

Ling, Moi Lin; Apisarnthanarak, Anucha; Thu, Le Thi Anh; Villanueva, Victoria; Pandjaitan, Costy; Yusof, Mohamad Yasim

2015-01-01

This document is an executive summary of APSIC Guidelines for Environmental Cleaning and Decontamination. It describes best practices in routine cleaning and decontamination in healthcare facilities as well as in specific settings e.g. management of patients with isolation precautions, food preparation areas, construction and renovation, and following a flood. It recommends the implementation of environmental hygiene program to keep the environment safe for patients, staff and visitors visiting a healthcare facility. Objective assessment of cleanliness and quality is an essential component of this program as a method for identifying quality improvement opportunities. Recommendations for safe handling of linen and bedding; as well as occupational health and safety issues are included in the guidelines. A training program is vital to ensure consistent adherence to best practices.

Coalbed methane: Clean energy for the world

USGS Publications Warehouse

Ahmed, A.-J.; Johnston, S.; Boyer, C.; Lambert, S.W.; Bustos, O.A.; Pashin, J.C.; Wray, A.

2009-01-01

Coalbed methane (CBM) has the potential to emerge as a significant clean energy resource. It also has the potential to replace other diminishing hydrocarbon reserves. The latest developments in technologies and methodologies are playing a key role in harnessing this unconventional resource. Some of these developments include adaptations of existing technologies used in conventional oil and gas generations, while others include new applications designed specifically to address coal's unique properties. Completion techniques have been developed that cause less damage to the production mechanisms of coal seams, such as those occurring during cementing operations. Stimulation fluids have also been engineered specifically to enhance CBM production. Deep coal deposits that remain inaccessible by conventional mining operations offer CBM development opportunities.

7 CFR 58.241 - Packaging, repackaging and storage.

Code of Federal Regulations, 2012 CFR

2012-01-01

... contamination. The room should be vacuumed as often as necessary and kept clean and orderly. ... clean, sound commercially accepted container or packaging material which will satisfactorily protect the... them practically free of residual product before being transferred from the filling room to the...

7 CFR 58.241 - Packaging, repackaging and storage.

Code of Federal Regulations, 2014 CFR

2014-01-01

... contamination. The room should be vacuumed as often as necessary and kept clean and orderly. ... clean, sound commercially accepted container or packaging material which will satisfactorily protect the... them practically free of residual product before being transferred from the filling room to the...

Self-Scrubbing Coal -- an integrated approach to clean air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, K.E.

1997-12-31

Carefree Coal is coal cleaned in a proprietary dense-media cyclone circuit, using ultrafine magnetite slurries, to remove noncombustible material, including up to 90% of the pyritic sulfur. Deep cleaning alone, however, cannot produce a compliance fuel from coals with high organic sulfur contents. In these cases, Self-Scrubbing Coal will be produced. Self-Scrubbing Coal is produced in the same manner as Carefree Coal except that the finest fraction of product from the cleaning circuit is mixed with limestone-based additives and briquetted. The reduced ash content of the deeply-cleaned coal will permit the addition of relatively large amounts of sorbent without exceedingmore » boiler ash specifications or overloading electrostatic precipitators. This additive reacts with sulfur dioxide (SO{sub 2}) during combustion of the coal to remove most of the remaining sulfur. Overall, sulfur reductions in the range of 80--90% are achieved. After nearly 5 years of research and development of a proprietary coal cleaning technology coupled with pilot-scale validation studies of this technology and pilot-scale combustion testing of Self-Scrubbing Coal, Custom Coals Corporation organized a team of experts to prepare a proposal in response to DOE`s Round IV Program Opportunity Notice for its Clean Coal Technology Program under Public Law 101-121 and Public Law 101-512. The main objective of the demonstration project is the production of a coal fuel that will result in up to 90% reduction in sulfur emissions from coal-fired boilers at a cost competitive advantage over other technologies designed to accomplish the same sulfur emissions and over naturally occurring low sulfur coals.« less

KSC-05PD-0113

NASA Technical Reports Server (NTRS)

2005-01-01

JET PROPULSION LABORATORY, CALIF. At Ball Aerospace in Boulder, Colo., the infrared (IR) spectrometer for the Deep Impact flyby spacecraft is inspected in the instrument assembly area in the Fisher Assembly building clean room. Deep Impact will probe beneath the surface of Comet Tempel 1 on July 4, 2005, when the comet is 83 million miles from Earth, and reveal the secrets of its interior. After releasing a 3- by 3-foot projectile to crash onto the surface, Deep Impacts flyby spacecraft will collect pictures and data of how the crater forms, measuring the craters depth and diameter, as well as the composition of the interior of the crater and any material thrown out, and determining the changes in natural outgassing produced by the impact. The spectrometer is part of the High Resolution Instrument in the spacecraft. This imager will be aimed at the ejected matter as the crater forms, and an infrared 'fingerprint' of the material from inside of the comet's nucleus will be taken. It will send the data back to Earth through the antennas of the Deep Space Network. Deep Impact is a NASA Discovery mission. Launch of Deep Impact is scheduled for Jan. 12 from Launch Pad 17-B, Cape Canaveral Air Force Station, Fla.

An investigation into the bacterial contamination of goniolenses in use in clinical practice.

PubMed

Grundon, Rachael; Scurrell, Emma; Mould, John; Hayton-Lee, Emma; Heinrich, Christine

2017-12-18

Objectives To report the incidence and evaluate the clinical significance of goniolens bacterial contamination in clinical use in dogs with three different usage protocols and one with an added cleaning protocol. Animals Studied and Methods Three groups of twenty dogs undergoing gonioscopy at a private practice in the UK had the goniolenses swabbed for bacteriology culture and identification prior to placement on the cornea. Three protocols of lens use, with 2 different types of goniolens, were studied. One protocol was then repeated with 21 dogs with a lens cleaning protocol prior to storage. Results Low levels of bacterial contamination were found in all 3 initial groups (10-15%). No correlation was found between usage protocol used and rate of contamination and no correlation was found between length of storage between use and contamination. All bacteria cultured were considered naturally occurring commensals for the canine eye and environment. The group with a cleaning protocol had a 4.7% contamination rate. This was not statistically different from the non-cleaning groups. Conclusions The rate of bacterial contamination of goniolenses in clinical practice is low and the bacterial contaminants consist of commensal bacteria, unlikely to be of detriment to the eye. Minimal contamination of the goniolenses was found and this did not appear to be of clinical significance. The introduction of a simple cleaning protocol did not produce a statistically significant reduction in bacterial contamination. © 2017 American College of Veterinary Ophthalmologists.

40 CFR 88.202-94 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 1992 model year. Averaging for clean-fuel vehicles means the sale of clean-fuel vehicles that meet more... emissions credits, for use in future model-year certification as permitted by regulation. Sales means vehicles that are produced, sold, and distributed (in accordance with normal business practices and...

9 CFR 114.7 - Personnel at licensed establishments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... worn by persons while preparing biological products shall be clean. All persons, immediately before entering laboratory rooms of a licensed establishment, shall change their outer clothing or effectively cover the same with gowns or other satisfactory clean garments. (2) Unsanitary practices such as, but...

9 CFR 114.7 - Personnel at licensed establishments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... worn by persons while preparing biological products shall be clean. All persons, immediately before entering laboratory rooms of a licensed establishment, shall change their outer clothing or effectively cover the same with gowns or other satisfactory clean garments. (2) Unsanitary practices such as, but...

9 CFR 114.7 - Personnel at licensed establishments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... worn by persons while preparing biological products shall be clean. All persons, immediately before entering laboratory rooms of a licensed establishment, shall change their outer clothing or effectively cover the same with gowns or other satisfactory clean garments. (2) Unsanitary practices such as, but...

Angler awareness of aquatic nuisance species and potential transport mechanisms

USGS Publications Warehouse

Gates, K.K.; Guy, C.S.; Zale, A.V.; Horton, T.B.

2009-01-01

The role anglers play in transporting aquatic nuisance species (ANS) is important in managing infestations and preventing introductions. The objectives of this study were to: (1) quantify angler movement patterns in southwestern Montana, ANS awareness and equipment cleaning practices; and (2) quantify the amount of soil transported on boots and waders. Mean distance travelled by residents from their home to the survey site was 115 km (??17, 95% CI). Mean distance travelled by non-residents was 1738 km (??74). Fifty-one percent of residents and 49% of non-residents reported occasionally, rarely or never cleaning their boots and waders between uses. Mean weight of soil carried on one boot leg was 8.39 g (??1.50). Movement and equipment cleaning practices of anglers in southwestern Montana suggest that future control of ANS dispersal may require restricting the use of felt-soled wading boots, requiring river-specific wading equipment or providing cleaning stations and requiring their use. ?? 2009 Blackwell Publishing Ltd.

A new kind of transparent and self-cleaning film for solar cells.

PubMed

Xu, Qi; Zhao, Qi; Zhu, Xiaofei; Cheng, Li; Bai, Suo; Wang, Zenghua; Meng, Leixing; Qin, Yong

2016-10-20

A kind of one step and in situ etching method is developed to fabricate a highly optically transparent and flexible self-cleaning superhydrophobic film (SSF). This SSF exhibits a very rough surface morphology with hierarchical structure, which makes it have a contact angle of 154.6° and a sliding angle of smaller than 1°. And the SSF can also be self-cleaned in the wind. The SSF hierarchical structure scatters the incident light, but it almost doesn't attenuate the light. So the SSF has antireflection properties and a high light transmittance of 94%. The excellent self-cleaning property, high light transmittance and antireflection property mean that the SSF greatly enhances the performance of solar cells in practical working conditions. The solar cell's efficiency maintains at 95.8% of its initial value after covering with the SSF, which is about 1.7 times higher than that of the solar cell covered with dust, as in practical conditions.

An Efficient Strategy of Screening for Pathogens in Wild-Caught Ticks and Mosquitoes by Reusing Small RNA Deep Sequencing Data

PubMed Central

An, Xiaoping; Fan, Hang; Ma, Maijuan; Anderson, Benjamin D.; Jiang, Jiafu; Liu, Wei; Cao, Wuchun; Tong, Yigang

2014-01-01

This paper explored our hypothesis that sRNA (18∼30 bp) deep sequencing technique can be used as an efficient strategy to identify microorganisms other than viruses, such as prokaryotic and eukaryotic pathogens. In the study, the clean reads derived from the sRNA deep sequencing data of wild-caught ticks and mosquitoes were compared against the NCBI nucleotide collection (non-redundant nt database) using Blastn. The blast results were then analyzed with in-house Python scripts. An empirical formula was proposed to identify the putative pathogens. Results showed that not only viruses but also prokaryotic and eukaryotic species of interest can be screened out and were subsequently confirmed with experiments. Specially, a novel Rickettsia spp. was indicated to exist in Haemaphysalis longicornis ticks collected in Beijing. Our study demonstrated the reuse of sRNA deep sequencing data would have the potential to trace the origin of pathogens or discover novel agents of emerging/re-emerging infectious diseases. PMID:24618575

Simultaneous imaging/reflectivity measurements to assess diagnostic mirror cleaning.

PubMed

Skinner, C H; Gentile, C A; Doerner, R

2012-10-01

Practical methods to clean ITER's diagnostic mirrors and restore reflectivity will be critical to ITER's plasma operations. We describe a technique to assess the efficacy of mirror cleaning techniques and detect any damage to the mirror surface. The method combines microscopic imaging and reflectivity measurements in the red, green, and blue spectral regions and at selected wavelengths. The method has been applied to laser cleaning of single crystal molybdenum mirrors coated with either carbon or beryllium films 150-420 nm thick. It is suitable for hazardous materials such as beryllium as the mirrors remain sealed in a vacuum chamber.

Potential association of vacuum cleaning frequency with an altered gut microbiota in pregnant women and their 2-year-old children.

PubMed

Avershina, Ekaterina; Ravi, Anuradha; Storrø, Ola; Øien, Torbjørn; Johnsen, Roar; Rudi, Knut

2015-12-21

Westernized lifestyle and hygienic behavior have contributed to dramatic changes in the human-associated microbiota. This particularly relates to indoor activities such as house cleaning. We therefore investigated the associations between washing and vacuum cleaning frequency and the gut microbiota composition in a large longitudinal cohort of mothers and their children. The gut microbiota composition was determined using 16S ribosomal RNA (rRNA) gene Illumina deep sequencing. We found that high vacuum cleaning frequency about twice or more a week was associated with an altered gut microbiota composition both during pregnancy and for 2-year-old children, while there were no associations with house washing frequency. In total, six Operational Taxonomic Units (OTUs) showed significant False Discovery Rate (FDR) corrected associations with vacuum cleaning frequency for mothers (two positive and four negative) and five for 2-year-old children (four positive and one negative). For mothers and the 2-year-old children, OTUs among the dominant microbiota (average >5 %) showed correlation to vacuum cleaning frequency, with an increase in Faecalibacterium prausnitzii for mothers (p = 0.013, FDR corrected), and Blautia sp. for 2-year children (p = 0.012, FDR corrected). Bacteria showing significant associations are among the dominant gut microbiota, which may indicate indirect immunomodulation of the gut microbiota possibly through increased allergen (dust mites) exposure as a potential mechanism. However, further exploration is needed to unveil mechanistic details.

A study of visual and blood contamination on reprocessed endodontic files from general dental practice.

PubMed

Letters, S; Smith, A J; McHugh, S; Bagg, J

2005-10-22

This study examined methods used for reprocessing endodontic instruments in general dental practice and determined the degree of residual visual contamination and blood contamination on 250 reprocessed files collected from 25 general dental practices. A questionnaire was administered to 25 general dental practitioners to obtain information on the re-processing of used endodontic files. Ten files which had been used and reprocessed were also collected from each practice. These were examined visually under a dissecting light microscope for residual contamination and then tested for blood deposits using the Kastle-Meyer test. Nineteen of the 25 practices used stainless steel hand files. No practitioners used endodontic files as single use devices. Ninety-two per cent of the practitioners discarded and replaced files when they were bent or damaged. Several decontamination methods were reported. The two combinations employed most frequently were manual cleaning and autoclaving or manual cleaning, followed by ultrasonic cleaning and autoclaving. Of the 250 files, 75% showed some degree of visual contamination and seven percent tested positive for residual blood. Blood contaminated files were significantly more heavily contaminated when examined visually. Large variations were found in residual contamination of files collected from practices using the same methods of decontamination. While all practitioners re-used endodontic files, the variations in decontamination methods reported indicate a lack of clarity on best practice. This study demonstrates that endodontic files are not reliably decontaminated by methods currently employed in dental practice.

7 CFR 58.246 - Cleaning of dryers, collectors, conveyors, ducts, sifters and storage bins.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG... and the frequency of cleaning shall be based upon observation of actual operating results and...

76 FR 77502 - Intent To Prepare a Draft Environmental Impact Statement Regarding the Wolfpen Knob Development...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... the Clean Water Act, may have related to discharges of dredge and fill material into Waters of the... deep mine, a preparation plant, a refuse disposal site, a water impoundment, and a new rail line. The... water impoundment would provide water for the operation of the preparation plant and dust control at the...

Evaluating and improving terminal hygiene practices on broiler farms to prevent Campylobacter cross-contamination between flocks.

PubMed

Battersby, Tara; Walsh, D; Whyte, P; Bolton, D

2017-06-01

The objectives of this study were to evaluate current cleaning practices in broiler houses by testing a range of sites after cleaning and disinfection and to test the efficacy of the most commonly used methods in a commercial broiler house after flock harvesting. Cleaning procedures on 20 broiler houses (10 separate farms) were examined by testing a range of sampling points (feeders, drinkers, walls, etc.) for total viable count (TVC), total Enterobacteriaceae count (TEC) and Campylobacter spp. after cleaning and disinfection, using culture based methods. In a second experiment, the six most commonly used commercially available disinfectants and/or detergent products were evaluated. The results of the first study demonstrated that critical areas in 12 of the 20 broiler houses were not effectively cleaned and disinfected between flocks as the tarmac apron, ante-room, house door, feeders, drinkers, walls, columns, barriers and/or bird weighs were Campylobacter positive. Thermal fogging with the combination of potassium peroxymonosulfate, sulfamic acid and sodium chloride (5%, v/v) or the glutaraldehyde and quaternary ammonium complex (0.3%, v/v) were the most effective treatments while other disinfectant treatments were considerably less effective. It was therefore concluded that farmers should review their broiler house cleaning and disinfection procedures if Campylobacter cross-contamination between successive flocks is to be prevented. Copyright © 2016 Elsevier Ltd. All rights reserved.

Interdental cleaning among persons with diabetes: relationships with individual characteristics.

PubMed

Strauss, S M; Stefanou, L B

2014-05-01

Given the existence of many potential oral health complications for adults with diabetes (especially for those who do not practise regular oral self-care), and the specific importance of regular interdental cleaning, the research determined the proportion of U.S. adults with diabetes who practise daily interdental cleaning and their socio-demographic, economic and oral health characteristics related to this practice. Analyses were conducted using data collected from 573 dentulous adults with diabetes ≥ 30 years who participated in the U.S. 2009-2010 National Health and Nutrition Examination survey. Using complex sample survey software, findings were extrapolated to >15 million U.S. adults. Descriptive statistics were used to determine the frequency of interdental cleaning, and chi-square tests were used to identify salient individual characteristics related to this practice. 41.2% reported that they never used any interdental device, while 24.8% indicated that they practised interdental cleaning daily. Statistically significant relationships (P < 0.05) with daily interdental cleaning included female sex, ever having had treatment for gum disease and using mouthwash daily for a dental problem. Because so many adults with diabetes do not practise regular interdental cleaning, and in view of the important role that dental hygienists fulfil as oral healthcare educators, there is a great need for dental hygienists to teach and motivate adults with diabetes to practise regular interdental cleaning. This need is especially great for subgroups of these adults who are men, have not been treated for periodontitis and do not regularly use a mouthwash for dental problems. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Improving urban environment through public commitment toward the implementation of clean and healthy living behaviors.

PubMed

Hartini, Nurul; Ariana, Atika Dian; Dewi, Triana Kesuma; Kurniawan, Afif

2017-01-01

Some parts of northern Surabaya are slum areas with dense populations, and the majority of the inhabitants are from low-income families. The condition of these areas is seemingly different from the fact that Surabaya city has won awards for its cleanliness, healthy environment preservation, and maintenance. This study aimed at turning the researched site into a clean and healthy environment. The research was conducted using a quasi-experiment technique with a non-randomized design and pretest-posttest procedures. The research subjects were 121 inhabitants who actively participated in the public commitment and psychoeducation program initiated by the researchers to learn and practice clean and healthy living behaviors. The statistical data showed that there was a substantial increase in the aspects of public commitment ( t -value = 4.008, p = 0.001) and psychoeducation ( t -value = 4.038, p = 0.001) to begin and maintain a clean and healthy living behaviors. A public commitment in the form of a collective declaration to keep learning and practicing a clean and healthy living behaviors were achieved. This commitment followed by psychoeducation aimed at introducing and exercising such behaviors was found to have effectively increased the research subjects' awareness to actively participate in preserving environmental hygiene. Developing communal behaviors toward clean and healthy living in inhabitants residing in an unhealthy slum area was a difficult task. Therefore, public commitment and psychoeducation must be aligned with the formulation of continuous habits demonstrating a clean and healthy living behaviors. These habits include the cessation of littering while putting trash in its place, optimizing the usage of public toilets, planting and maintaining vegetation around the area, joining and contributing to the "garbage bank" program, and participating in the Green and Clean Surabaya competition.

Detecting Aerosol Effect on Deep Precipitation Systems: A Modeling Study

NASA Astrophysics Data System (ADS)

Li, X.; Tao, W.; Khain, A.; Kummerow, C.; Simpson, J.

2006-05-01

Urban cities produce high concentrations of anthropogenic aerosols. These aerosols are generally hygroscopic and may serve as Cloud Condensation Nuclei (CCN). This study focuses on the aerosol indirect effect on the deep convective systems over the land. These deep convective systems contribute to the majority of the summer time rainfall and are important for local hydrological cycle and weather forecast. In a companion presentation (Tao et al.) in this session, the mechanisms of aerosol-cloud-precipitation interactions in deep convective systems are explored using cloud-resolving model simulations. Here these model results will be analyzed to provide guidance to the detection of the impact of aerosols as CCN on summer time, deep convections using the currently available observation methods. The two-dimensional Goddard Cumulus Ensemble (GCE) model with an explicit microphysical scheme has been used to simulate the aerosol effect on deep precipitation systems. This model simulates the size distributions of aerosol particles, as well as cloud, rain, ice crystals, snow, graupel, and hail explicitly. Two case studies are analyzed: a midlatitude summer time squall in Oklahoma, and a sea breeze convection in Florida. It is shown that increasing the CCN number concentration does not affect the rainfall structure and rain duration in these two cases. The total surface rainfall rate is reduced in the squall case, but remains essentially the same in the sea breeze case. For the long-lived squall system with a significant portion of the stratiform rain, the surface rainfall PDF (probability density function) distribution is more sensitive to the change of the initial CCN concentrations compared with the total surface rainfall. The possibility of detecting the aerosol indirect effect in deep precipitation systems from the space is also studied in this presentation. The hydrometeors fields from the GCE model simulations are used as inputs to a microwave radiative transfer model. It is found that Tb at higher frequencies (35 GHz and 85 GHz) are quite sensitive to the CCN concentration variations. This is because the higher frequency brightness temperatures are sensitive to large, ice-phase particles. In a clean environment, the deep convections produce larger cloud particles. When these cloud particles are transported above the freezing level by strong updrafts, they form larger precipitable ice particles (snow, graupel and hail) compared with dirty environment simulations. These larger ice particles result in significantly colder brightness temperatures at high frequencies in the clean scenario simulations.

Clean Energy Generation and Dispatch in Reformed Wholesale Electricity Markets: Experience in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Shengru; Hurlbut, David J; Li, Ma

In recent years, the US electricity market has undergone several stages of reform, and gradually formed the market where the wholesale electricity price is determined by the supply and demand. The US electricity market also changes along with the rapid development of clean energy, forming a number of the market mechanisms that is specifically developed for clean energy power generation characteristics. On the basis of discussing the pricing mechanism of US electricity market, this paper analyzes the experience and practice of encouraging renewable energy development policy and clean energy dispatch from the angle of market mechanism and dispatching decision, andmore » puts forward the reference for clean energy dispatching in China.« less

ASSESSMENT OF PHYSICAL COAL CLEANING PRACTICES FOR SULFUR REMOVAL

EPA Science Inventory

The report gives results of a study of the current level of coal cleaning activity in the U.S. n 1983, the U.S. DOE's Energy Information Administration (EIA) expanded coal data collection activities to include information on the extent and type of coal preparation conducted in ea...

21 CFR 211.182 - Equipment cleaning and use log.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Equipment cleaning and use log. 211.182 Section 211.182 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Records and...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.182 - Equipment cleaning and use log.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Equipment cleaning and use log. 211.182 Section 211.182 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Records and...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.182 - Equipment cleaning and use log.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Equipment cleaning and use log. 211.182 Section 211.182 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Records and...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

21 CFR 211.182 - Equipment cleaning and use log.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Equipment cleaning and use log. 211.182 Section 211.182 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Records and...

7 CFR 982.101 - Grade requirements for shelled hazelnuts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Foreign Material: 0.02 of one percent, for foreign material. (2) For Defects: Five percent for kernels or... or portions of hazelnut kernels shall meet the following requirements: (1) Well dried and clean; (2... firm and crisp, not containing more than 6 percent moisture. (2) Clean means practically free from...

7 CFR 982.101 - Grade requirements for shelled hazelnuts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Foreign Material: 0.02 of one percent, for foreign material. (2) For Defects: Five percent for kernels or... or portions of hazelnut kernels shall meet the following requirements: (1) Well dried and clean; (2... firm and crisp, not containing more than 6 percent moisture. (2) Clean means practically free from...

40 CFR Table 4 to Subpart Wwww of... - Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

.... a new or existing closed molding operation using compression/injection molding uncover, unwrap or... new or existing cleaning operation not use cleaning solvents that contain HAP, except that styrene may... contacts resin. 3. a new or existing materials HAP-containing materials storage operation keep containers...

Assessing edge-of-field nutrient runoff from agricultural lands in the United States: How clean is clean enough?

USDA-ARS?s Scientific Manuscript database

Excess nutrients from numerous sources (e.g., agricultural and urban runoff, treatment plant discharge, streambank erosion) continue to adversely impact water resources in spite of improved treatment technologies and management practices. In fact, determination of cause(s) of accelerated nutrient e...

40 CFR 63.803 - Work practice standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... containers for storing finishing, gluing, cleaning, and washoff materials. (h) Application equipment... from a container that has a volume of no more than 2.0 gallons. (3) When spray is automated, that is... shall pump or drain all organic HAP solvent used for line cleaning into a normally closed container. (j...

21 CFR 211.67 - Equipment cleaning and maintenance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Equipment cleaning and maintenance. 211.67 Section 211.67 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.67...

Day to Day

ERIC Educational Resources Information Center

Jurecki, Dennis

2006-01-01

A clean, healthy and safe school provides students, faculty and staff with an environment conducive to learning and working. However, budget and staff reductions can lead to substandard cleaning practices and unsanitary conditions. Some school facility managers have been making the switch to a day-schedule to reduce security and energy costs, and…

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

The lymphatic mechanisms of brain cleaning: application of optical coherence tomography and fluorescence microscopy

NASA Astrophysics Data System (ADS)

Glushkovskaya-Semyachkina, O.; Abdurashitov, A.; Fedosov, I.; Namykin, A.; Pavlov, A.; Shirokov, A.; Shushunova, N.; Sindeeva, O.; Khorovodov, A.; Ulanova, M.; Sagatova, V.; Agranovich, I.; Bodrova, A.; Kurths, J.

2018-04-01

Here we studied the role of cerebral lymphatic system in the brain clearing using intraparenchymal injection of Evans Blue and gold nanorods assessed by optical coherent tomography and fluorescence microscopy. Our data clearly show that the cerebral lymphatic system plays an important role in the brain cleaning via meningeal lymphatic vessels but not cerebral veins. Meningeal lymphatic vessels transport fluid from the brain into the deep cervical node, which is the first anatomical "station" for lymph outflow from the brain. The lymphatic processes underlying brain clearing are more slowly vs. peripheral lymphatics. These results shed light on the lymphatic mechanisms responsible for brain clearing as well as interaction between the intra- and extracranial lymphatic compartment.

Controversies surrounding continuous deep sedation at the end of life: the parliamentary and societal debates in France.

PubMed

Raus, Kasper; Chambaere, Kenneth; Sterckx, Sigrid

2016-06-29

Continuous deep sedation at the end of life is a practice that has been the topic of considerable ethical debate, for example surrounding its perceived similarity or dissimilarity with physician-assisted dying. The practice is generally considered to be legal as a form of symptom control, although this is mostly only assumed. France has passed an amendment to the Public Health Act that would grant certain terminally ill patients an explicit right to continuous deep sedation until they pass away. Such a framework would be unique in the world. In this paper we will highlight and reflect on four relevant aspects and shortcomings of the proposed bill. First, that the bill suggests that continuous deeps sedation should be considered as a sui generis practice. Second, that it requires that sedation should always be accompanied by the withholding of all artificial nutrition and hydration. In the most recently amended version of the legal proposal it is stated that life sustaining treatments are withheld unless the patient objects. Third, that the French bill would not require that the suffering for which continuous deep sedation is initiated is unbearable. Fourth, the question as to whether the proposal should be considered as a way to avoid having to decriminalise euthanasia and/or PAS or, on the contrary, as a veiled way to decriminalise these practices. The French proposal to amend the Public Health Act to include a right to continuous deep sedation for some patients is a unique opportunity to clarify the legality of continuous deep sedation as an end-of-life practice. Moreover, it would recognize that the practice of continuous deep sedation raises ethical and legal issues that are different from those raised by symptom control on the one hand and assisted dying on the other hand. Nevertheless, there are still various issues of significant ethical concern in the French legislative proposal.

Implementing AORN recommended practices for prevention of deep vein thrombosis.

PubMed

Van Wicklin, Sharon A

2011-11-01

One to two people per 1,000 are affected by deep vein thrombosis (DVT) or pulmonary embolism in the United States each year. AORN published its new "Recommended practices for prevention of deep vein thrombosis" to guide perioperative RNs in establishing organization-wide protocols for DVT prevention. Strategies for successful implementation of the recommended practices include taking a multidisciplinary approach to protocol development, providing education and guidance for performing preoperative patient assessments and administering DVT prophylaxis, and having appropriate resources and the facility's policy and procedure for DVT prevention readily available in the practice setting. Hospital and ambulatory patient scenarios have been included as examples of appropriate execution of the recommended practices. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Occurrence Prospect of HDR and Target Site Selection Study in Southeastern of China

NASA Astrophysics Data System (ADS)

Lin, W.; Gan, H.

2017-12-01

Hot dry rock (HDR) geothermal resource is one of the most important clean energy in future. Site selection a HDR resource is a fundamental work to explore the HDR resources. This paper compiled all the HDR development projects domestic and abroad, and summarized the location of HDR geothermal geological index. After comparing the geological background of HDR in the southeast coastal area of China, Yangjiang Xinzhou in Guangdong province, Leizhou Peninsula area, Lingshui in Hainan province and Huangshadong in Guangzhou were selected from some key potential target area along the southeast coast of China. Deep geothermal field model of the study area is established based on the comprehensive analysis of the target area of deep geothermal geological background and deep thermal anomalies. This paper also compared the hot dry rock resources target locations, and proposed suggestions for the priority exploration target area and exploration scheme.

Sonochemical cleaning efficiencies in dental instruments

NASA Astrophysics Data System (ADS)

Tiong, T. Joyce; Walmsley, A. Damien; Price, Gareth J.

2012-05-01

Ultrasound has been widely used for cleaning purposes in a variety of situations, including in dental practice. Cleaning is achieved through a combination of acoustically driven streaming effects and sonochemical effects arising from the production of inertial cavitation in a liquid. In our work, various dental instruments used for endodontic (root canal) treatment have been evaluated for their efficiency in producing sonochemical effects in an in-vitro cleaning environment. The areas where cavitation was produced were mapped by monitoring chemiluminescence from luminol solutions and this was correlated with their cleaning efficiencies - assessed by the ability to bleach a dye, to form an emulsion by mixing immiscible components and also to remove ink from a glass surface. The results showed good correlation (Pearson's coefficient > 0.9) between the cavitation and cleaning efficiencies, suggesting that the former plays an important role in cleaning. The methods developed and the results will be beneficial in endodontics research in order to optimise future root canal instruments and treatments.

Deep neural network and noise classification-based speech enhancement

NASA Astrophysics Data System (ADS)

Shi, Wenhua; Zhang, Xiongwei; Zou, Xia; Han, Wei

2017-07-01

In this paper, a speech enhancement method using noise classification and Deep Neural Network (DNN) was proposed. Gaussian mixture model (GMM) was employed to determine the noise type in speech-absent frames. DNN was used to model the relationship between noisy observation and clean speech. Once the noise type was determined, the corresponding DNN model was applied to enhance the noisy speech. GMM was trained with mel-frequency cepstrum coefficients (MFCC) and the parameters were estimated with an iterative expectation-maximization (EM) algorithm. Noise type was updated by spectrum entropy-based voice activity detection (VAD). Experimental results demonstrate that the proposed method could achieve better objective speech quality and smaller distortion under stationary and non-stationary conditions.

Factors affecting the microbiological condition of the deep tissues of mechanically tenderized beef.

PubMed

Gill, C O; McGinnis, J C

2005-04-01

Whole or halved top butt prime beef cuts were treated in two types of mechanical tenderizing machines that both pierced the meat with thin blades but that used blades of different forms. Aerobes on meat surfaces and in the deep tissues of cuts after treatments were counted. When cuts were treated at a laboratory using a Lumar machine, the contamination of deep tissues increased significantly (P < 0.01) with increasing numbers of aerobic bacteria on meat surfaces and decreased significantly (P < 0.001) with increasing distance from the incised surface. However, contamination did not increase significantly (P > 0.1) with repeated incising of the meat. When halved cuts were incised one or eight times using a commercially cleaned Ross machine at a retail store, the numbers of aerobes recovered from deep tissues were similar with both treatments. When halved cuts were treated in one or other machine, deep tissue contamination was greater with the Lumar machine than with the Ross machine. Contamination of deep tissues as a result of tenderizing by piercing with thin blades can be minimized if the blades are designed to limit the number of bacteria carried into the meat and the microbiological condition of incised surface is well controlled.

High elevation watersheds in the southern Appalachians: indicators of sensitivity to acidic deposition and the potential for restoration through liming

Treesearch

Jennifer D. Knoepp; James M. Vose; William A. Jackson; Katherine J. Elliott; Stan Zarnoch

2016-01-01

Southern Appalachian high elevation watersheds have deep rocky soils with high organic matter content, different vegetation communities, and receive greater inputs of acidic deposition compared to low elevation sites within the region. Since the implementation of the Clean Air Act Amendment in the 1990s, concentrations of acidic anions in rainfall have...

Injection Drug Users' Perceived Barriers to Using Self-Initiated Harm Reduction Strategies.

PubMed

Bonar, Erin E; Rosenberg, Harold

2014-08-01

Increasing the frequency with which injecting drug users (IDUs) engage in self-initiated harm reduction strategies could improve their health, but few investigations have examined IDUs' perceived barriers to engaging in these behaviors. We interviewed 90 IDUs recruited from needle exchanges to assess: a) perceived obstacles to their use of two specific harm reduction strategies (i.e., test shots and pre-injection skin cleaning) designed to reduce two unhealthy outcomes (i.e., overdose and bacterial infections, respectively) and b) their use of other risk-reduction practices. The most frequently cited barrier for both test shots and skin cleaning was being in a rush to inject one's drugs. Other, less commonly cited barriers were strategy-specific (e.g., buying drugs from a known dealer as a reason not to do a test shot; not having access to cleaning supplies as a reason not to clean skin). Regarding other risk reduction practices, participants' most frequently reported using new or clean injecting supplies and avoiding sharing needles and injecting supplies. Some, but not all, of the barriers generated by participants in our study were similar to those frequently reported in other investigations, perhaps due to differences in the type of sample recruited or in the harm reduction behaviors investigated.

Injection Drug Users’ Perceived Barriers to Using Self-Initiated Harm Reduction Strategies

PubMed Central

Rosenberg, Harold

2014-01-01

Introduction and Aims Increasing the frequency with which injecting drug users (IDUs) engage in self-initiated harm reduction strategies could improve their health, but few investigations have examined IDUs’ perceived barriers to engaging in these behaviors. Method We interviewed 90 IDUs recruited from needle exchanges to assess: a) perceived obstacles to their use of two specific harm reduction strategies (i.e., test shots and pre-injection skin cleaning) designed to reduce two unhealthy outcomes (i.e., overdose and bacterial infections, respectively) and b) their use of other risk-reduction practices. Results The most frequently cited barrier for both test shots and skin cleaning was being in a rush to inject one’s drugs. Other, less commonly cited barriers were strategy-specific (e.g., buying drugs from a known dealer as a reason not to do a test shot; not having access to cleaning supplies as a reason not to clean skin). Regarding other risk reduction practices, participants’ most frequently reported using new or clean injecting supplies and avoiding sharing needles and injecting supplies. Discussion and Conclusions Some, but not all, of the barriers generated by participants in our study were similar to those frequently reported in other investigations, perhaps due to differences in the type of sample recruited or in the harm reduction behaviors investigated. PMID:25419201

OBSERVATIONAL STUDY OF FINAL CLEANING AND AHERA CLEARANCE SAMPLING AT ASBESTOS-ABATEMENT SITES IN NEW JERSEY

EPA Science Inventory

A study was conducted during the summer of 1988 to document final cleaning procedures and evaluate Asbestos Hazard Emergency Response Act (AHERA) clearance air sampling practices used at 20 asbestos-abatement sites in New Jersey. Each abatement took place in a school building and...

Data Cleaning in Mathematics Education Research: The Overlooked Methodological Step

ERIC Educational Resources Information Center

Hubbard, Aleata

2017-01-01

The results of educational research studies are only as accurate as the data used to produce them. Drawing on experiences conducting large-scale efficacy studies of classroom-based algebra interventions for community college and middle school students, I am developing practice-based data cleaning procedures to support scholars in conducting…

16 CFR 423.5 - Unfair or deceptive acts or practices.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... (a) Textile wearing apparel and certain piece goods. In connection with the sale, in or affecting... for a manufacturer or importer: (1) To fail to disclose to a purchaser, prior to sale, instructions...) To fail to warn a purchaser, prior to sale, when the product cannot be cleaned by any cleaning...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... be an efficient waste disposal and plumbing system maintained in good repair; (d) Each room in which... a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical precaution shall be taken to exclude dogs, cats, rodents and other vermin from the rooms in which...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... be an efficient waste disposal and plumbing system maintained in good repair; (d) Each room in which... a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical precaution shall be taken to exclude dogs, cats, rodents and other vermin from the rooms in which...

One-step fabrication of robust superhydrophobic and superoleophilic surfaces with self-cleaning and oil/water separation function.

PubMed

Zhang, Zhi-Hui; Wang, Hu-Jun; Liang, Yun-Hong; Li, Xiu-Juan; Ren, Lu-Quan; Cui, Zhen-Quan; Luo, Cheng

2018-03-01

Superhydrophobic surfaces have great potential for application in self-cleaning and oil/water separation. However, the large-scale practical applications of superhydrophobic coating surfaces are impeded by many factors, such as complicated fabrication processes, the use of fluorinated reagents and noxious organic solvents and poor mechanical stability. Herein, we describe the successful preparation of a fluorine-free multifunctional coating without noxious organic solvents that was brushed, dipped or sprayed onto glass slides and stainless-steel meshes as substrates. The obtained multifunctional superhydrophobic and superoleophilic surfaces (MSHOs) demonstrated self-cleaning abilities even when contaminated with or immersed in oil. The superhydrophobic surfaces were robust and maintained their water repellency after being scratched with a knife or abraded with sandpaper for 50 cycles. In addition, stainless-steel meshes sprayed with the coating quickly separated various oil/water mixtures with a high separation efficiency (>93%). Furthermore, the coated mesh maintained a high separation efficiency above 95% over 20 cycles of separation. This simple and effective strategy will inspire the large-scale fabrication of multifunctional surfaces for practical applications in self-cleaning and oil/water separation.

Retail Deli Slicer Inspection Practices: An EHS-Net Study.

PubMed

Lipcsei, Lauren E; Brown, Laura G; Hoover, E Rickamer; Faw, Brenda V; Hedeen, Nicole; Matis, Bailey; Nicholas, David; Ripley, Danny

2018-05-01

The Centers for Disease Control and Prevention (CDC) estimates that 3,000 people die in the United States each year from foodborne illness, and Listeria monocytogenes causes the third highest number of deaths. Risk assessment data indicate that L. monocytogenes contamination of particularly delicatessen meats sliced at retail is a significant contributor to human listeriosis. Mechanical deli slicers are a major source of L. monocytogenes cross-contamination and growth. In an attempt to prevent pathogen cross-contamination and growth, the U.S. Food and Drug Administration (FDA) created guidance to promote good slicer cleaning and inspection practices. The CDC's Environmental Health Specialists Network conducted a study to learn more about retail deli practices concerning these prevention strategies. The present article includes data from this study on the frequency with which retail delis met the FDA recommendation that slicers should be inspected each time they are properly cleaned (defined as disassembling, cleaning, and sanitizing the slicer every 4 h). Data from food worker interviews in 197 randomly selected delis indicate that only 26.9% of workers ( n = 53) cleaned and inspected their slicers at this frequency. Chain delis and delis that serve more than 300 customers on their busiest day were more likely to have properly cleaned and inspected slicers. Data also were collected on the frequency with which delis met the FDA Food Code provision that slicers should be undamaged. Data from observations of 685 slicers in 298 delis indicate that only 37.9% of delis ( n = 113) had slicers that were undamaged. Chain delis and delis that provide worker training were more likely to have slicers with no damage. To improve slicer practices, food safety programs and the retail food industry may wish to focus on worker training and to focus interventions on independent and smaller delis, given that these delis were less likely to properly inspect their slicers and to have undamaged slicers.

Using Observational Data to Estimate the Effect of Hand Washing and Clean Delivery Kit Use by Birth Attendants on Maternal Deaths after Home Deliveries in Rural Bangladesh, India and Nepal

PubMed Central

Seward, Nadine; Prost, Audrey; Copas, Andrew; Corbin, Marine; Li, Leah; Colbourn, Tim; Osrin, David; Neuman, Melissa; Azad, Kishwar; Kuddus, Abdul; Nair, Nirmala; Tripathy, Prasanta; Manandhar, Dharma; Costello, Anthony; Cortina-Borja, Mario

2015-01-01

Background Globally, puerperal sepsis accounts for an estimated 8–12% of maternal deaths, but evidence is lacking on the extent to which clean delivery practices could improve maternal survival. We used data from the control arms of four cluster-randomised controlled trials conducted in rural India, Bangladesh and Nepal, to examine associations between clean delivery kit use and hand washing by the birth attendant with maternal mortality among home deliveries. Methods We tested associations between clean delivery practices and maternal deaths, using a pooled dataset for 40,602 home births across sites in the three countries. Cross-sectional data were analysed by fitting logistic regression models with and without multiple imputation, and confounders were selected a priori using causal directed acyclic graphs. The robustness of estimates was investigated through sensitivity analyses. Results Hand washing was associated with a 49% reduction in the odds of maternal mortality after adjusting for confounding factors (adjusted odds ratio (AOR) 0.51, 95% CI 0.28–0.93). The sensitivity analysis testing the missing at random assumption for the multiple imputation, as well as the sensitivity analysis accounting for possible misclassification bias in the use of clean delivery practices, indicated that the association between hand washing and maternal death had been over estimated. Clean delivery kit use was not associated with a maternal death (AOR 1.26, 95% CI 0.62–2.56). Conclusions Our evidence suggests that hand washing in delivery is critical for maternal survival among home deliveries in rural South Asia, although the exact magnitude of this effect is uncertain due to inherent biases associated with observational data from low resource settings. Our findings indicating kit use does not improve maternal survival, suggests that the soap is not being used in all instances that kit use is being reported. PMID:26295838

Public-Private roundtables at the fourth Clean Energy Ministerial, 17-18 April 2013, New Delhi, India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowe, Tracey

2013-06-30

The Clean Energy Ministerial (CEM) is a high-level global forum to share best practices and promote policies and programs that advance clean energy technologies and accelerate the transition to a global clean energy economy. The CEM works to increase energy efficiency, expand clean energy supply, and enhance clean energy access worldwide. To achieve these goals, the CEM pursues a three-part strategy that includes high-level policy dialogue, technical cooperation, and engagement with the private sector and other stakeholders. Each year, energy ministers and other high-level delegates from the 23 participating CEM governments come together to discuss clean energy, review clean energymore » progress, and identify tangible next steps to accelerate the clean energy transition. The U.S. Department of Energy, which played a crucial role in launching the CEM, hosted the first annual meeting of energy ministers in Washington, DC, in June 2010. The United Arab Emirates hosted the second Clean Energy Ministerial in 2011, and the United Kingdom hosted the third Clean Energy Ministerial in 2012. In April 2013, India hosted the fourth Clean Energy Ministerial (CEM4) in New Delhi. Key insights from CEM4 are summarized in the report. It captures the ideas and recommendations of the government and private sector leaders who participated in the discussions on six discussion topics: reducing soft costs of solar PV; energy management systems; renewables policy and finance; clean vehicle adoption; mini-grid development; and power systems in emerging economies.« less

Stethoscope Cleaning During Patient Care.

PubMed

Ghumman, Ghazi Wahla; Ahmad, Nina; Pop-Vicas, Aurora; Iftikhar, Sadia

2018-05-01

We conducted a cross-sectional survey of healthcare workers in two community teaching hospitals to better understand clinicians' beliefs and practices related to cleaning of their stethoscopes. The study was conducted from September 2015 to May 2016. Among the total 358 responses received, 45%, 40%, 10% and 5% were from attending physicians, medical students, nurses, and resident physicians, respectively. Although the majority of the respondents (76%) frequently used a stethoscope at work, and almost all (93%) believed that stethoscopes can be involved in pathogen transmission, only 29% of participants reported cleaning their stethoscopes after every use. Hospitals should include stethoscope cleaning into their overall infection prevention efforts. [Full article available at http://rimed.org/rimedicaljournal-2018-05.asp].

Safety Gear Decontamination Practices Among Florida Firefighters: Analysis of a Text-Based Survey Methodology.

PubMed

Moore, Kevin J; Koru-Sengul, Tulay; Alvarez, Armando; Schaefer-Solle, Natasha; Harrison, Tyler R; Kobetz, Erin N; Caban-Martinez, Alberto J

2018-02-01

Despite the National Fire Protection Association (NFPA) 1851 Personal Protective Equipment Care and Maintenance guidelines, little is known about the routine cleaning of firefighter bunker gear. In collaboration with a large Florida firefighter union, a mobile phone text survey was administered, which included eight questions in an item logic format. In total, 250 firefighters participated in the survey of which 65% reported cleaning their bunker gear in the past 12 months. Approximately 32% ( n = 52) indicated that they had above average confidence in gear cleaning procedures. Arriving at a fire incident response was a significant predictor of gear cleaning in the 12 months preceding survey administration. Using mobile phone-based texting for periodic queries on adherence to NFPA cleaning guidelines and safety message distribution may assist firefighters to increase decontamination procedure frequency.

Geothermal energy control system and method

DOEpatents

Matthews, Hugh B.

1976-01-01

A geothermal energy transfer and utilization system makes use of thermal energy stored in hot solute-bearing well water to generate super-heated steam from an injected flow of clean water; the super-heated steam is then used for operating a turbine-driven pump at the well bottom for pumping the hot solute-bearing water at high pressure and in liquid state to the earth's surface, where it is used by transfer of its heat to a closed-loop boiler-turbine-alternator combination for the generation of electrical or other power. Residual concentrated solute-bearing water is pumped back into the earth. The clean cooled water is regenerated at the surface-located system and is returned to the deep well pumping system also for lubrication of a novel bearing arrangement supporting the turbine-driven pump system.

40 CFR Appendix 7 to Subpart A of... - API Recommended Practice 13B-2

Code of Federal Regulations, 2010 CFR

2010-07-01

... facilitate cleaning and funnel-shaped top to catch falling drops. For compliance monitoring under the NPDES... condenser. b. Pack the retort body with steel wool. c. Apply lubricant/sealant to threads of retort cup and... the clean and dry liquid receiver. This is mass (C), grams. Place the receiver below condenser outlet...

40 CFR Appendix 7 to Subpart A of... - API Recommended Practice 13B-2

Code of Federal Regulations, 2011 CFR

2011-07-01

... facilitate cleaning and funnel-shaped top to catch falling drops. For compliance monitoring under the NPDES... condenser. b. Pack the retort body with steel wool. c. Apply lubricant/sealant to threads of retort cup and... the clean and dry liquid receiver. This is mass (C), grams. Place the receiver below condenser outlet...

9 CFR 590.544 - Spray process powder; definitions and requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-blended: Provided, That the blending is done in a room as provided in § 590.548 or in a closed blending system and in accordance with clean, sanitary practices and such procedures as may be prescribed by the... accomplished in a clean, sanitary manner and in accordance with such procedures as may be prescribed by the...

9 CFR 590.544 - Spray process powder; definitions and requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-blended: Provided, That the blending is done in a room as provided in § 590.548 or in a closed blending system and in accordance with clean, sanitary practices and such procedures as may be prescribed by the... accomplished in a clean, sanitary manner and in accordance with such procedures as may be prescribed by the...

9 CFR 590.544 - Spray process powder; definitions and requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

...-blended: Provided, That the blending is done in a room as provided in § 590.548 or in a closed blending system and in accordance with clean, sanitary practices and such procedures as may be prescribed by the... accomplished in a clean, sanitary manner and in accordance with such procedures as may be prescribed by the...

9 CFR 590.544 - Spray process powder; definitions and requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-blended: Provided, That the blending is done in a room as provided in § 590.548 or in a closed blending system and in accordance with clean, sanitary practices and such procedures as may be prescribed by the... accomplished in a clean, sanitary manner and in accordance with such procedures as may be prescribed by the...

Superhydrophobic surfaces fabricated by femtosecond laser with tunable water adhesion: from lotus leaf to rose petal.

PubMed

Long, Jiangyou; Fan, Peixun; Gong, Dingwei; Jiang, Dafa; Zhang, Hongjun; Li, Lin; Zhong, Minlin

2015-05-13

Superhydrophobic surfaces with tunable water adhesion have attracted much interest in fundamental research and practical applications. In this paper, we used a simple method to fabricate superhydrophobic surfaces with tunable water adhesion. Periodic microstructures with different topographies were fabricated on copper surface via femtosecond (fs) laser irradiation. The topography of these microstructures can be controlled by simply changing the scanning speed of the laser beam. After surface chemical modification, these as-prepared surfaces showed superhydrophobicity combined with different adhesion to water. Surfaces with deep microstructures showed self-cleaning properties with extremely low water adhesion, and the water adhesion increased when the surface microstructures became flat. The changes in surface water adhesion are attributed to the transition from Cassie state to Wenzel state. We also demonstrated that these superhydrophobic surfaces with different adhesion can be used for transferring small water droplets without any loss. We demonstrate that our approach provides a novel but simple way to tune the surface adhesion of superhydrophobic metallic surfaces for good potential applications in related areas.

Conservation of artists' acrylic emulsion paints: XPS, NEXAFS and ATR-FTIR studies of wet cleaning methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Willneff, E. A.; Ormsby, B. A.; Stevens, J. S.

Works of art prepared with acrylic emulsion paints became commercially available in the 1960s. It is increasingly necessary to undertake and optimise cleaning and preventative conservation treatments to ensure their longevity. Model artists' acrylic paint films covered with artificial soiling were thus prepared on a canvas support and exposed to a variety of wet cleaning treatments based on aqueous or hydrocarbon solvent systems. This included some with additives such as chelating agents and/or surfactants, and microemulsion systems made specifically for conservation practice. The impact of cleaning (soiling removal) on the paint film surface was examined visually and correlated with resultsmore » of attenuated total reflection Fourier transform infrared, XPS and near-edge X-ray absorption fine structure analyses – three spectroscopic techniques with increasing surface sensitivity ranging from approximately $-$ 1000, 10 and 5 nm, respectively. Visual analysis established the relative cleaning efficacy of the wet cleaning treatments in line with previous results. X-ray spectroscopy analysis provided significant additional findings, including evidence for (i) surfactant extraction following aqueous swabbing, (ii) modifications to pigment following cleaning and (iii) cleaning system residues.« less

Conservation of artists' acrylic emulsion paints: XPS, NEXAFS and ATR-FTIR studies of wet cleaning methods

DOE PAGES

Willneff, E. A.; Ormsby, B. A.; Stevens, J. S.; ...

2014-02-17

Works of art prepared with acrylic emulsion paints became commercially available in the 1960s. It is increasingly necessary to undertake and optimise cleaning and preventative conservation treatments to ensure their longevity. Model artists' acrylic paint films covered with artificial soiling were thus prepared on a canvas support and exposed to a variety of wet cleaning treatments based on aqueous or hydrocarbon solvent systems. This included some with additives such as chelating agents and/or surfactants, and microemulsion systems made specifically for conservation practice. The impact of cleaning (soiling removal) on the paint film surface was examined visually and correlated with resultsmore » of attenuated total reflection Fourier transform infrared, XPS and near-edge X-ray absorption fine structure analyses – three spectroscopic techniques with increasing surface sensitivity ranging from approximately $-$ 1000, 10 and 5 nm, respectively. Visual analysis established the relative cleaning efficacy of the wet cleaning treatments in line with previous results. X-ray spectroscopy analysis provided significant additional findings, including evidence for (i) surfactant extraction following aqueous swabbing, (ii) modifications to pigment following cleaning and (iii) cleaning system residues.« less

Deep breathing after surgery

MedlinePlus

... and taking big breaths can be uncomfortable. A device called an incentive spirometer can help you take deep breaths correctly. If you do not have this device, you can still practice deep breathing on your ...

Cleaning with Bulk Nanobubbles.

PubMed

Zhu, Jie; An, Hongjie; Alheshibri, Muidh; Liu, Lvdan; Terpstra, Paul M J; Liu, Guangming; Craig, Vincent S J

2016-11-01

The electrolysis of aqueous solutions produces solutions that are supersaturated in oxygen and hydrogen gas. This results in the formation of gas bubbles, including nanobubbles ∼100 nm in size that are stable for ∼24 h. These aqueous solutions containing bubbles have been evaluated for cleaning efficacy in the removal of model contaminants bovine serum albumin and lysozyme from surfaces and in the prevention of the fouling of surfaces by these same proteins. Hydrophilic and hydrophobic surfaces were investigated. It is shown that nanobubbles can prevent the fouling of surfaces and that they can also clean already fouled surfaces. It is also argued that in practical applications where cleaning is carried out rapidly using a high degree of mechanical agitation the role of cleaning agents is not primarily in assisting the removal of soil but in suspending the soil that is removed by mechanical action and preventing it from redepositing onto surfaces. This may also be the primary mode of action of nanobubbles during cleaning.

Development of a high-yield via-last through silicon via process using notchless silicon etching and wet cleaning of the first metal layer

NASA Astrophysics Data System (ADS)

Watanabe, Naoya; Kikuchi, Hidekazu; Yanagisawa, Azusa; Shimamoto, Haruo; Kikuchi, Katsuya; Aoyagi, Masahiro; Nakamura, Akio

2017-07-01

A high-yield via-last through silicon via (TSV) process has been developed using notchless Si etching and wet cleaning of the first metal layer. In this process, the notching was suppressed by optimizing the deep Si etching conditions and wet cleaning was performed using an organic alkaline solution to remove reaction products generated by the etchback step on the first metal layer. By this process, a number of small TSVs (TSV diameter: 6 µm TSV depth: 22 µm number of TSVs: 20,000/chip) could be formed uniformly on an 8-in. wafer. The electrical characteristics of small TSVs formed by this via-last TSV process were investigated. The TSV resistance determined by four-terminal measurements was approximately 24 mΩ. The leakage current between the TSV and the Si substrate was 2.5 pA at 5 V. The TSV capacitance determined using an inductance-capacitance-resistance (LCR) meter was 54 fF, while the TSV yield determined from TSV chain measurements was high (83%) over an 8-in. wafer.

Geothermal energy control system and method

DOEpatents

Matthews, Hugh B.

1977-01-01

A geothermal energy transfer and utilization system makes use of thermal energy stored in hot solute-bearing well water to generate super-heated steam from an injected flow of clean water; the super-heated steam is then used for operating a turbine-driven pump at the well bottom for pumping the hot solute-bearing water at high pressure and in liquid state to the earth's surface, where it is used by transfer of its heat to a closed-loop boiler-turbine-alternator combination for the generation of electrical or other power. Residual concentrated solute-bearing water is pumped back into the earth. The clean cooled water is regenerated at the surface-located system and is returned to the deep well pumping system also for lubrication of a novel bearing arrangement supporting the turbine-driven pump system. The bearing system employs liquid lubricated thrust and radial bearings with all bearing surfaces bathed in clean water serving as a lubricant and maintained under pressure to prevent entry into the bearings of contaminated geothermal fluid, an auxiliary thrust ball bearing arrangement comes into operation when starting or stopping the pumping system.

Novel Transport Characterizations in Layered Two-Dimensional Materials and Bulk Chalcogenides

NASA Astrophysics Data System (ADS)

Pennypacker, Sam

We present a case study (September 20 - October 13, 2015) of synergistic, multi-instrument observations of aerosols, clouds and the marine boundary layer (MBL) at the Eastern North Atlantic (ENA) ARM site centered on a period of exceptionally low (20 - 50 cm-3) surface accumulation mode (0.1 - 1 mum) aerosol particle number concentrations. We divide the case study into three regimes (high, clean and ultra-clean) based on daily median number concentrations, and compare finer resolution (hourly or less) observations between these regimes. The analysis focuses on the possibility of using these ultra-clean events to study pristine conditions in the remote MBL, as well as examining evidence for a recently proposed conceptual model for the large-scale depletion of CCN-sized particles in post-frontal air masses. Relative to the high and clean regimes, the ultra-clean regime tends to exhibit significantly fewer particles between 0.1 and 0.4 mum in diameter and a relatively increased prevalence of larger accumulation mode particles. In addition, supermicron particles tend to dominate total scattering in the ultra-clean regime, and there is little evidence for absorbing aerosol. These observations are more in line with a heavily scavenged but natural marine aerosol population and minimal contribution from continental sources such as anthropogenic pollution, biomass burning or dust. The air masses with the consistently lowest accumulation mode aerosol number concentrations are largely dominated by heavily drizzling clouds with high liquid water path (LWP) cores, deep decoupled boundary layers, open cellular organization and notable surface forcing of sub-cloud turbulence, even at night. We end with a discussion of the implications of this work the second aerosol indirect effect and pristine conditions in the remote MBL.

Implementation of a solvent management program to control paint shop volatile organic compounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Floer, M.M.; Hicks, B.H.

1997-12-31

The majority of automobile assembly plant volatile organic compound (VOC) emissions are generated from painting operations. Typical paint operations generate more than 90 percent of the total plant emissions and, up to, 50 percent can be released by cleaning sources. Plant practices which contribute to the release of VOC emissions include the cleaning of paint lines and equipment, tanks, spray booths, floors and vehicles. Solvents continue to be the largest contributing source of VOC emissions in an automotive paint shop. To reduce overall VOC emissions, environmental regulations and guidelines were introduced under the Clean Air Act; Pollution Prevention and Wastemore » Minimization programs, Control Techniques, and special air permit conditions. The introduction of these regulations and guidelines has driven industry toward continual refinement of their present cleaning methods while pursuing new techniques and technologies. Industry has also shown a proactive approach by introducing new waterborne and powder coating paint technologies to reduce overall emissions. As new paint technologies are developed and introduced, special attention must be given to the types of materials utilized for cleaning. The development and implementation of a solvent management program allows a facility to standardize a program to properly implement materials, equipment, technologies and work practices to reduce volatile organic compound emissions, meet strict cleaning requirements posed by new paint technologies and produce a vehicle which meets the high quality standards of the customer. This paper will assess the effectiveness of a solvent management program by examining pollution prevention initiatives and data from four different painting operations.« less

Cleanliness audit of clinical surfaces and equipment: who cleans what?

PubMed

Anderson, R E; Young, V; Stewart, M; Robertson, C; Dancer, S J

2011-07-01

Current guidelines recommend regular cleaning of clinical equipment. We monitored items on a surgical ward for predominant user, hand-touch frequency, cleaning responsibilities and measurement of organic soil. Equipment was assessed in triplicate against a cleanliness benchmark of 100 relative light units (RLU) using the Hygiena® ATP system. There were 44 items, of which 21 were cleaned by clinical support workers (CSWs), five by domestic staff; three by nurses, three by doctors, and 12 with no designated cleaning responsibility. Geometric mean RLUs ranged from 60 to 550/100 cm² for small items such as hand-gel containers, bed control, blood pressure cuff and clinical notes; with similar values of 80-540/100 cm² RLU for larger items such as electrocardiogram machine, defibrillator, trolleys and tables. Overall geometric mean was 249/100 cm² RLU for all surfaces, with 84% (37 of 44) items exceeding the 100RLU benchmark. Of 27 items cleaned by clinical staff, 24 (89%) failed the benchmark. Of 12 sites with no cleaning specification, 11 (92%) failed the benchmark. Three of seven 'clean' sites (<100/100 cm² RLU) were cleaned by domestic staff. Average log(10) RLU of surfaces cleaned by domestics were 64% lower compared with surfaces cleaned by CSWs (95% confidence interval: 35%, 80%; P=0.019). In conclusion, clinical equipment frequently demonstrates high levels of organic soil, whether or not items have assigned cleaning responsibility. These findings suggest that cleaning practices for clinical equipment may require review, along with education of staff with specific cleaning responsibilities. Copyright © 2011 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

"Please Do Not Leave Any Notes for the Cleaning Lady, as Many Do Not Speak English Fluently": Policy, Power, and Language Brokering in a Multilingual Workplace

ERIC Educational Resources Information Center

Gonçalves, Kellie; Schluter, Anne

2017-01-01

This article investigates the covert language policy and micro-language planning practices of one female Brazilian-American entrepreneur, Magda, within her multilingual cleaning company. Because Magda is plurilingual (Spolsky in "Language policy." Cambridge University Press, Cambridge, 2004), she is able to draw on her metalinguistic…

Comparison the effects of shallow and deep endotracheal tube suctioning on respiratory rate, arterial blood oxygen saturation and number of suctioning in patients hospitalized in the intensive care unit: a randomized controlled trial.

PubMed

Abbasinia, Mohammad; Irajpour, Alireza; Babaii, Atye; Shamali, Mehdi; Vahdatnezhad, Jahanbakhsh

2014-09-01

Endotracheal tube suctioning is essential for improve oxygenation in the patients undergoing mechanical ventilation. There are two types of shallow and deep endotracheal tube suctioning. This study aimed to evaluate the effect of shallow and deep suctioning methods on respiratory rate (RR), arterial blood oxygen saturation (SpO2) and number of suctioning in patients hospitalized in the intensive care units of Al-Zahra Hospital, Isfahan, Iran. In this randomized controlled trial, 74 patients who hospitalized in the intensive care units of Isfahan Al-Zahra Hospital were randomly allocated to the shallow and deep suctioning groups. RR and SpO2 were measured immediately before, immediately after, 1 and 3 minute after each suctioning. Number of suctioning was also noted in each groups. Data were analyzed using repeated measures analysis of variance (RMANOVA), chi-square and independent t-tests. RR was significantly increased and SpO2 was significantly decreased after each suctioning in the both groups. However, these changes were not significant between the two groups. The numbers of suctioning was significantly higher in the shallow suctioning group than in the deep suctioning group. Conclusion : Shallow and deep suctioning had a similar effect on RR and SpO2. However, shallow suctioning caused further manipulation of patient's trachea than deep suctioning method. Therefore, it seems that deep endotracheal tube suctioning method can be used to clean the airway with lesser manipulation of the trachea.

Comparison the Effects of Shallow and Deep Endotracheal Tube Suctioning on Respiratory Rate, Arterial Blood Oxygen Saturation and Number of Suctioning in Patients Hospitalized in the Intensive Care Unit: A Randomized Controlled Trial

PubMed Central

Abbasinia, Mohammad; Irajpour, Alireza; Babaii, Atye; Shamali, Mehdi; Vahdatnezhad, Jahanbakhsh

2014-01-01

Introduction: Endotracheal tube suctioning is essential for improve oxygenation in the patients undergoing mechanical ventilation. There are two types of shallow and deep endotracheal tube suctioning. This study aimed to evaluate the effect of shallow and deep suctioning methods on respiratory rate (RR), arterial blood oxygen saturation (SpO2) and number of suctioning in patients hospitalized in the intensive care units of Al-Zahra Hospital, Isfahan, Iran. Methods: In this randomized controlled trial, 74 patients who hospitalized in the intensive care units of Isfahan Al-Zahra Hospital were randomly allocated to the shallow and deep suctioning groups. RR and SpO2 were measured immediately before, immediately after, 1 and 3 minute after each suctioning. Number of suctioning was also noted in each groups. Data were analyzed using repeated measures analysis of variance (RMANOVA), chi-square and independent t-tests. Results: RR was significantly increased and SpO2 was significantly decreased after each suctioning in the both groups. However, these changes were not significant between the two groups. The numbers of suctioning was significantly higher in the shallow suctioning group than in the deep suctioning group. Conclusion: Shallow and deep suctioning had a similar effect on RR and SpO2. However, shallow suctioning caused further manipulation of patient's trachea than deep suctioning method. Therefore, it seems that deep endotracheal tube suctioning method can be used to clean the airway with lesser manipulation of the trachea. PMID:25276759

Considerations of Methods of Improving Helicopter Efficiency

NASA Technical Reports Server (NTRS)

Dingeldein, Richard C.

1961-01-01

Recent NASA helicopter research indicates that significant improvements in hovering efficiency, up to 7 percent, are available from the use of a special airfoil section formed by combining an NACA 632A015 thickness distribution with an NACA 230 mean line. This airfoil should be considered for flying-crane-type helicopters. Application of standard leading-edge roughness causes a large drop in efficiency; however, the cambered rotor is shown to retain its superiority over a rotor having a symmetrical airfoil when both rotors have leading-edge roughness. A simple analysis of available rotor static-thrust data indicates a greatly reduced effect of compressibility effects on the rotor profile-drag power than predicted from calculations. Preliminary results of an experimental study of helicopter parasite drag indicate the practicability of achieving an equivalent flat-plate parasite-drag area of less than 4 square feet for a rotor-head-pylon-fuselage configuration (landing gear retracted) in the 2,000-pound minimum-flying-weight class. The large drag penalty of a conventional skid-type landing (3.6 square feet) can be reduced by two-thirds by careful design. Clean, fair, and smooth fuselages that tend to have narrow, deep cross sections are shown to have advantages from the standpoint of drag and download. A ferry range of the order of 1,500 miles is indicated to be practicable for the small helicopter considered.

A perspective study on green cleaning for Malaysian public hospital

NASA Astrophysics Data System (ADS)

Ramli, N. A.; Zawawi, E. M.; Arif, N. R. M.; Mahbob, N. S.; Sulaiman, Z.; Zainol, N. N.

2018-02-01

Cleaning being a major contributor to the operations and maintenance expenditure and also Indoor Environmental Quality (IEQ) issues. Improper and ineffective cleaning can harm the environment and poses greatest risk to health. The use of traditional cleaning products presents a variety of human health and ecological concerns; and may contribute to poor IEQ. As an effort to reduce the issue of operations and maintenance costs and IEQ issues in a building, it is important to establish a green cleaning programme to ensure that the buildings are cleaned in a green way. Numbers of scholars has pointed out the factors which had prevented the green cleaning implementation in hospital buildings. Nonetheless, the significance of these factors has yet to be practically explored in the Malaysian context. Hence, the aim of the paper is to identify the most critical factor that prevents the implementation of green cleaning in Malaysian hospital building. A questionnaire survey and personal communication (i.e. interview) was conducted which involved two groups of respondents. They are the hospital maintenance staff (Cleansing Service Department) and cleaning contractors. Frequency and criticality index calculations have been used to rank these factors according to the level of importance. The result showed that an “unclear components and requirements of green cleaning” indicated as the most critical factor that prevent the implementation of green cleaning in Malaysian hospital building. In the concern for a successful implementation of green cleaning, it is hope that the findings of these studies can be enlightenment to the cleaning contractors as well as the hospital maintenance management team in Malaysia.

Identifying opportunities to enhance environmental cleaning in 23 acute care hospitals .

PubMed

Carling, P C; Parry, M F; Von Beheren, S M

2008-01-01

The quality of environmental hygiene in hospitals is under increasing scrutiny from both healthcare providers and consumers because the prevalence of serious infections due to multidrug-resistant pathogens has reached alarming levels. On the basis of the results from a small number of hospitals, we undertook a study to evaluate the thoroughness of disinfection and cleaning in the patient's immediate environment and to identify opportunities for improvement in a diverse group of acute care hospitals. Prospective multicenter study to evaluate the thoroughness of terminal room cleaning in hospitals using a novel targeting method to mimic the surface contamination of objects in the patient's immediate environment. Twenty-three acute care hospitals. The overall thoroughness of terminal cleaning, expressed as a percentage of surfaces evaluated, was 49% (range for all 23 hospitals, 35%-81%). Despite the tight clustering of overall cleaning rates in 21 of the hospitals, there was marked variation within object categories, which was particularly notable with respect to the cleaning of toilet handholds, bedpan cleaners, light switches, and door knobs (mean cleaning rates, less than 30%; institutional ranges, 0%-90%). Sinks, toilet seats, and tray tables, in contrast, were consistently relatively well cleaned (mean cleaning rates, over 75%). Patient telephones, nurse call devices, and bedside rails were inconsistently cleaned. We identified significant opportunities in all participating hospitals to improve the cleaning of frequently touched objects in the patient's immediate environment. The information obtained from such assessments can be used to develop focused administrative and educational interventions that incorporate ongoing feedback to the environmental services staff, to improve cleaning and disinfection practices in healthcare institutions.

Citizenship as the Practice of Deep Ecology.

ERIC Educational Resources Information Center

Chamberlin, Charles

1997-01-01

Defines the educational practice of deep ecology as utilizing a social action framework to teach students how to take action on behalf of the communities of flora, fauna, and people. Discusses the theories that form the basis for this movement and specifically addresses how this can be applied to citizenship education. (MJP)

Use of cryopumps on large space simulation systems

NASA Technical Reports Server (NTRS)

Mccrary, L. E.

1980-01-01

The need for clean, oil free space simulation systems has demanded the development of large, clean pumping systems. The assurance of optically dense liquid nitrogen baffles over diffusion pumps prevents backstreaming to a large extent, but does not preclude contamination from accidents or a control failure. Turbomolecular pumps or ion pumps achieve oil free systems but are only practical for relatively small chambers. Large cryopumps were developed and checked out which do achieve clean pumping of very large chambers. These pumps can be used as the original pumping system or can be retrofitted as a replacement for existing diffusion pumps.

Financial Incentives to Enable Clean Energy Deployment: Policy Overview and Good Practices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, Sadie

Financial incentives have been widely implemented by governments around the world to support scaled up deployment of renewable energy and energy efficiency technologies and practices. As of 2015, at least 48 countries have adopted financial incentives to support renewable energy and energy efficiency deployment. Broader clean energy strategies and plans provide a crucial foundation for financial incentives that often complement regulatory policies such as renewable energy targets, standards, and other mandates. This policy brief provides a primer on key financial incentive design elements, lessons from different country experiences, and curated support resources for more detailed and country-specific financial incentive designmore » information.« less

Evaluation of a hygiene monitor for detection of contamination in dental surgeries.

PubMed

Douglas, C W; Rothwell, P S

1991-05-11

Routines for disinfecting working surfaces in dental surgeries are difficult to monitor without time-consuming and labour-intensive microbiological techniques, yet effective monitoring is a vital part of cross-infection control. Easy to use, on-site methods would be valuable in this context. This study evaluates a portable monitor, the Biotrace Hygiene Monitor, which uses bioluminescence to measure adenosine triphosphate (ATP) on surfaces. Under laboratory conditions, the ability of the monitor to detect whole saliva and Streptococcus sanguis was determined and, in the general practice environment, the level of ATP on surfaces in five dental surgeries was assessed. The minimum amount of saliva detectable was 0.5 microliters and in surgeries, the monitor readily identified numerous surfaces with fairly high levels of ATP. Routine cleaning methods sometimes left ATP on surfaces at levels which represented a cross-infection risk, if it is assumed that the ATP derived from patients' saliva. Modification of cleaning methods resulted in a reduction of ATP levels to within that which could be considered reasonably practicably safe. It is concluded that the Biotrace Hygiene Monitor offers a simple and valuable means of monitoring dental practice cleaning routines.

Field performance of self-siphon sediment cleansing set for sediment removal in deep CSO chamber.

PubMed

Zhou, Yongchao; Zhang, Yiping; Tang, Ping

2013-01-01

This paper presents a study of the self-siphon sediment cleansing set (SSCS), a system designed to remove sediment from the deep combined sewer overflow (CSO) chamber during dry-weather periods. In order to get a better understanding of the sediment removal effectiveness and operational conditions of the SSCS system, we carried out a full-scale field study and comparison analysis on the sediment depth changes in the deep CSO chambers under the conditions with and without the SSCS. The field investigation results demonstrated that the SSCS drains the dry-weather flow that accumulated for 50-57 min from the sewer channel to the intercepting system in about 10 min. It is estimated that the bed shear stress in the CSO chamber and sewer channel is improved almost 25 times on average. The SSCS acts to remove the near bed solids with high pollution load efficiently. Moreover, it cleans up not only the new sediment layer but also part of the previously accumulated sediment.

GaAs-oxide interface states - Gigantic photoionization via Auger-like process

NASA Technical Reports Server (NTRS)

Lagowski, J.; Kazior, T. E.; Gatos, H. C.; Walukiewicz, W.; Siejka, J.

1981-01-01

Spectral and transient responses of photostimulated current in MOS structures were employed for the study of GaAs-anodic oxide interface states. Discrete deep traps at 0.7 and 0.85 eV below the conduction band were found with concentrations of 5 x 10 to the 12th/sq cm and 7 x 10 to the 11th/sq cm, respectively. These traps coincide with interface states induced on clean GaAs surfaces by oxygen and/or metal adatoms (submonolayer coverage). In contrast to surfaces with low oxygen coverage, the GaAs-thick oxide interfaces exhibited a high density (about 10 to the 14th/sq cm) of shallow donors and acceptors. Photoexcitation of these donor-acceptor pairs led to a gigantic photoionization of deep interface states with rates 1000 times greater than direct transitions into the conduction band. The gigantic photoionization is explained on the basis of energy transfer from excited donor-acceptor pairs to deep states.

Needle and Syringe Cleaning Practices among Injection Drug Users.

ERIC Educational Resources Information Center

Fisher, Dennis G.; Harbke, Colin R.; Canty, John R.; Reynolds, Grace L.

2002-01-01

Evaluates the effect of needle exchange on the bleach-mediated disinfection (BMD) practices of 176 needle and syringe sharing injection drug users (IDUs). Results reveal that IDUs who traded sex for money or drugs were less likely to practice BMD, and IDUs who reported a reduced number of sex partners were more likely to practice BMD. (Contains 36…

Military Standard: Sanitation Standards for Food Storage Facilities

DTIC Science & Technology

1989-08-31

maintenance of equipment and utensils ---------------------- 10 5.11 Cleaning and sanitizing treatment ------------- 10 5.12 Methods ...STD-909 3. DEFINITIONS 3.1 Adequate. Methods that are needed to accomplish the intended purpose in keeping with accepted public health practices. 3.2...Inspection and Grading Programs" or approved by the Major Army Command (MACON) Surgeon. 5.11 Cleaning and sanitizing treatment. The methods used for

7 CFR 51.2956 - Practically clean.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Walnuts in the Shell Definitions § 51.2956... practically free from adhering dirt or other foreign matter, and that individual walnuts are not damaged by... not be considered as dirt or foreign matter. ...

7 CFR 51.2956 - Practically clean.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Walnuts in the Shell Definitions § 51.2956... practically free from adhering dirt or other foreign matter, and that individual walnuts are not damaged by... not be considered as dirt or foreign matter. ...

Clean dealing. Legal considerations for buy/sell agreements.

PubMed

Johnson, Bruce A

2002-01-01

Buy/sell agreements for medical practices relate as much to governance and power as to dollars and cents. A practice should consider strategic, financial and legal issues in the buy/sell arrangement and express them in the group's legal documents.

Wheelchair cleaning and disinfection in Canadian health care facilities: "That's wheelie gross!".

PubMed

Gardner, Paula; Muller, Matthew P; Prior, Betty; So, Ken; Tooze, Jane; Eum, Linda; Kachur, Oksana

2014-11-01

Wheelchairs are complex equipment that come in close contact with individuals at increased risk of transmitting and acquiring antibiotic-resistant organisms and health care-associated infection. The purpose of this study was to determine the status of wheelchair cleaning and disinfection in Canadian health care facilities. Acute care hospitals (ACHs), chronic care hospitals (CCHs), and long-term care facilities (LTCFs) were contacted and the individual responsible for oversight of wheelchair cleaning and disinfection was identified. A structured interview was conducted that focused on current practices and concerns, barriers to effective wheelchair cleaning and disinfection, and potential solutions. Interviews were completed at 48 of the 54 facilities contacted (89%), including 18 ACHs, 16 CCHs, and 14 LTCFs. Most (n = 24) facilities had 50-200 in-house wheelchairs. Respondents were very concerned about wheelchair cleaning as an infection control issue. Specific concerns included the lack of reliable systems for tracking and identifying dirty and clean wheelchairs (71%, 34/48), failure to clean and disinfect wheelchairs between patients (52%, 25/48), difficulty cleaning cushions (42%, 20/48), lack of guidelines (35%, 27/48), continued use of visibly soiled wheelchairs (29%, 14/48) and lack of resources (25%, 12/48). Our results suggest that wheelchair cleaning and disinfection is not optimally performed at many Canadian hospitals and LTCFs. Specific guidance on wheelchair cleaning and disinfection is necessary. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Enhanced conflict monitoring via a short-duration, video-assisted deep breathing in healthy young adults: an event-related potential approach through the Go/NoGo paradigm.

PubMed

Cheng, Kok Suen; Chang, Yun Fah; Han, Ray P S; Lee, Poh Foong

2017-01-01

Practitioners of mindfulness are reported to have greater cognitive control especially in conflict monitoring, response inhibition and sustained attention. However, due to the various existing methods in each mindfulness practices and also, the high commitment factor, a barrier still exists for an individual to pick up the practices. Therefore, the effect of short duration deep breathing on the cognitive control is investigated here. Short duration guided deep breathing videos consisting of 5, 7 and 9 min respectively were created and used on subjects training. The effect on cognitive control was assessed using a Go/NoGo task along with event-related potential (ERP) measurements at Fz, Cz, and Pz. From the study, the significant outcome showed at the follow-up session in which participants engaged for 5 min deep breathing group showed a profound NoGo N2 amplitude increment as compared to the control group, indicating an enhanced conflict monitoring ability. An inverse relationship between the NoGo N2 amplitude and the breathing duration is observed as well at the follow-up session. These results indicated the possibility of performing short duration deep breathing guided by a video to achieve an enhanced conflict monitoring as an alternative to other mindfulness practices and 5 min is found to be the optimum practice duration. This study is the first to establish a relationship between deep breathing and conflict monitoring through ERP. The study population of young adults taken from the same environment reduces the variance in ERP results due to age and environment. A larger sample size would provide a greater statistical power. A longer duration of deep breathing should be investigated to further clarify the relationship between the practice duration and the NoGo N2 amplitude. The result can be split by gender and analyzed separately due to the different brain structure of males and females.

"The Invisible Staff": A Qualitative Analysis of Environmental Service Workers' Perceptions of the VA Clostridium difficile Prevention Bundle Using a Human Factors Engineering Approach.

PubMed

Yanke, Eric; Moriarty, Helene; Carayon, Pascale; Safdar, Nasia

2018-06-11

Using a novel human factors engineering approach, the Systems Engineering Initiative for Patient Safety model, we evaluated environmental service workers' (ESWs) perceptions of barriers and facilitators influencing adherence to the nationally mandated Department of Veterans Affairs Clostridium difficile infection (CDI) prevention bundle. A focus group of ESWs was conducted. Qualitative analysis was performed employing a visual matrix display to identify barrier/facilitator themes related to Department of Veterans Affairs CDI bundle adherence using the Systems Engineering Initiative for Patient Safety work system as a framework. Environmental service workers reported adequate cleaning supplies/equipment and displayed excellent knowledge of CDI hand hygiene requirements. Environmental service workers described current supervisory practices as providing an acceptable amount of time to clean CDI rooms, although other healthcare workers often pressured ESWs to clean rooms more quickly. Environmental service workers reported significant concern for CDI patients' family members as well as suggesting uncertainty regarding the need for family members to follow infection prevention practices. Small and cluttered patient rooms made cleaning tasks more difficult, and ESW cleaning tasks were often interrupted by other healthcare workers. Environmental service workers did not feel comfortable asking physicians for more time to finish cleaning a room nor did ESWs feel comfortable pointing out lapses in physician hand hygiene. Multiple work system components serve as barriers to and facilitators of ESW adherence to the nationally mandated Department of Veterans Affairs CDI bundle. Environmental service workers may represent an underappreciated resource for hospital infection prevention, and further efforts should be made to engage ESWs as members of the health care team.

Deconvolution enhanced direction of arrival estimation using one- and three-component seismic arrays applied to ocean induced microseisms

NASA Astrophysics Data System (ADS)

Gal, M.; Reading, A. M.; Ellingsen, S. P.; Koper, K. D.; Burlacu, R.; Gibbons, S. J.

2016-07-01

Microseisms in the period of 2-10 s are generated in deep oceans and near coastal regions. It is common for microseisms from multiple sources to arrive at the same time at a given seismometer. It is therefore desirable to be able to measure multiple slowness vectors accurately. Popular ways to estimate the direction of arrival of ocean induced microseisms are the conventional (fk) or adaptive (Capon) beamformer. These techniques give robust estimates, but are limited in their resolution capabilities and hence do not always detect all arrivals. One of the limiting factors in determining direction of arrival with seismic arrays is the array response, which can strongly influence the estimation of weaker sources. In this work, we aim to improve the resolution for weaker sources and evaluate the performance of two deconvolution algorithms, Richardson-Lucy deconvolution and a new implementation of CLEAN-PSF. The algorithms are tested with three arrays of different aperture (ASAR, WRA and NORSAR) using 1 month of real data each and compared with the conventional approaches. We find an improvement over conventional methods from both algorithms and the best performance with CLEAN-PSF. We then extend the CLEAN-PSF framework to three components (3C) and evaluate 1 yr of data from the Pilbara Seismic Array in northwest Australia. The 3C CLEAN-PSF analysis is capable in resolving a previously undetected Sn phase.

KSC-98pc1195

NASA Image and Video Library

1998-10-01

Workers at this clean room facility, Cape Canaveral Air Station, maneuver the protective can that covered Deep Space 1 during transportation from KSC away from the spacecraft. Deep Space 1 will undergo spin testing at the site. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include a solar-powered ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. The ion propulsion engine is the first non-chemical propulsion to be used as the primary means of propelling a spacecraft. Deep Space 1 will complete most of its mission objectives within the first two months, but may also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999. The spacecraft will be launched aboard a Boeing Delta 7326 rocket from Launch Pad 17A, Cape Canaveral Air Station, in October. Delta II rockets are medium capacity expendable launch vehicles derived from the Delta family of rockets built and launched since 1960. Since then there have been more than 245 Delta launches

Examining factors that influence the effectiveness of cleaning antineoplastic drugs from drug preparation surfaces: a pilot study.

PubMed

Hon, Chun-Yip; Chua, Prescillia Ps; Danyluk, Quinn; Astrakianakis, George

2014-06-01

Occupational exposure to antineoplastic drugs has been documented to result in various adverse health effects. Despite the implementation of control measures to minimize exposure, detectable levels of drug residual are still found on hospital work surfaces. Cleaning these surfaces is considered as one means to minimize the exposure potential. However, there are no consistent guiding principles related to cleaning of contaminated surfaces resulting in hospitals to adopt varying practices. As such, this pilot study sought to evaluate current cleaning protocols and identify those factors that were most effective in reducing contamination on drug preparation surfaces. Three cleaning variables were examined: (1) type of cleaning agent (CaviCide®, Phenokil II™, bleach and chlorhexidine), (2) application method of cleaning agent (directly onto surface or indirectly onto a wipe) and (3) use of isopropyl alcohol after cleaning agent application. Known concentrations of antineoplastic drugs (either methotrexate or cyclophosphamide) were placed on a stainless steel swatch and then, systematically, each of the three cleaning variables was tested. Surface wipes were collected and quantified using high-performance liquid chromatography-tandem mass spectrometry to determine the percent residual of drug remaining (with 100% being complete elimination of the drug). No one single cleaning agent proved to be effective in completely eliminating all drug contamination. The method of application had minimal effect on the amount of drug residual. In general, application of isopropyl alcohol after the use of cleaning agent further reduced the level of drug contamination although measureable levels of drug were still found in some cases.

Deep Energy Retrofit Guidance for the Building America Solutions Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Less, Brennan; Walker, Iain

2015-01-01

The U.S. DOE Building America program has established a research agenda targeting market-relevant strategies to achieve 40% reductions in existing home energy use by 2030. Deep Energy Retrofits (DERs) are part of the strategy to meet and exceed this goal. DERs are projects that create new, valuable assets from existing residences, by bringing homes into alignment with the expectations of the 21st century. Ideally, high energy using, dated homes that are failing to provide adequate modern services to their owners and occupants (e.g., comfortable temperatures, acceptable humidity, clean, healthy), are transformed through comprehensive upgrades to the building envelope, services andmore » miscellaneous loads into next generation high performance homes. These guidance documents provide information to aid in the broader market adoption of DERs.« less

Radio frequency interference mitigation using deep convolutional neural networks

NASA Astrophysics Data System (ADS)

Akeret, J.; Chang, C.; Lucchi, A.; Refregier, A.

2017-01-01

We propose a novel approach for mitigating radio frequency interference (RFI) signals in radio data using the latest advances in deep learning. We employ a special type of Convolutional Neural Network, the U-Net, that enables the classification of clean signal and RFI signatures in 2D time-ordered data acquired from a radio telescope. We train and assess the performance of this network using the HIDE &SEEK radio data simulation and processing packages, as well as early Science Verification data acquired with the 7m single-dish telescope at the Bleien Observatory. We find that our U-Net implementation is showing competitive accuracy to classical RFI mitigation algorithms such as SEEK's SUMTHRESHOLD implementation. We publish our U-Net software package on GitHub under GPLv3 license.

Simulation of conservation practices using the APEX model

USDA-ARS?s Scientific Manuscript database

Information on agricultural Best Management Practices (BMPs) and their effectiveness in controlling agricultural non-point source pollution is crucial in developing Clean Water Act programs such as the Total Maximum Daily Loads for impaired watersheds. A modeling study was conducted to evaluate var...

40 CFR 22.38 - Supplemental rules of practice governing the administrative assessment of civil penalties under...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Supplemental rules of practice governing the administrative assessment of civil penalties under the Clean Water Act. 22.38 Section 22.38 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL CONSOLIDATED RULES OF PRACTICE GOVERNING THE ADMINISTRATIVE ASSESSMENT OF CIVIL...

MRO DKF Post-Processing Tool

NASA Technical Reports Server (NTRS)

Ayap, Shanti; Fisher, Forest; Gladden, Roy; Khanampompan, Teerapat

2008-01-01

This software tool saves time and reduces risk by automating two labor-intensive and error-prone post-processing steps required for every DKF [DSN (Deep Space Network) Keyword File] that MRO (Mars Reconnaissance Orbiter) produces, and is being extended to post-process the corresponding TSOE (Text Sequence Of Events) as well. The need for this post-processing step stems from limitations in the seq-gen modeling resulting in incorrect DKF generation that is then cleaned up in post-processing.

Deep learning based syndrome diagnosis of chronic gastritis.

PubMed

Liu, Guo-Ping; Yan, Jian-Jun; Wang, Yi-Qin; Zheng, Wu; Zhong, Tao; Lu, Xiong; Qian, Peng

2014-01-01

In Traditional Chinese Medicine (TCM), most of the algorithms used to solve problems of syndrome diagnosis are superficial structure algorithms and not considering the cognitive perspective from the brain. However, in clinical practice, there is complex and nonlinear relationship between symptoms (signs) and syndrome. So we employed deep leaning and multilabel learning to construct the syndrome diagnostic model for chronic gastritis (CG) in TCM. The results showed that deep learning could improve the accuracy of syndrome recognition. Moreover, the studies will provide a reference for constructing syndrome diagnostic models and guide clinical practice.

Deep Learning Based Syndrome Diagnosis of Chronic Gastritis

PubMed Central

Liu, Guo-Ping; Wang, Yi-Qin; Zheng, Wu; Zhong, Tao; Lu, Xiong; Qian, Peng

2014-01-01

In Traditional Chinese Medicine (TCM), most of the algorithms used to solve problems of syndrome diagnosis are superficial structure algorithms and not considering the cognitive perspective from the brain. However, in clinical practice, there is complex and nonlinear relationship between symptoms (signs) and syndrome. So we employed deep leaning and multilabel learning to construct the syndrome diagnostic model for chronic gastritis (CG) in TCM. The results showed that deep learning could improve the accuracy of syndrome recognition. Moreover, the studies will provide a reference for constructing syndrome diagnostic models and guide clinical practice. PMID:24734118

Weatherization and Intergovernmental Programs Office FY 2017 Budget At-A-Glance

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-03-01

The Weatherization and Intergovernmental Programs (WIP) Office is part of EERE’s balanced research, development, demonstration, and deployment approach to accelerate America’s transition to a clean energy economy. WIP’s mission is to partner with state and local organizations to improve energy security and to significantly accelerate the deployment of clean energy technologies and practices by a wide range of government, community, and business stakeholders.

Deep infection in total hip arthroplasty

PubMed Central

Hamilton, Henry; Jamieson, John

2008-01-01

Objective To report on a 30-year prospective study of deep infection in 1993 consecutive total hip arthroplasties performed by a single surgeon. Methods The relations of numerous variables to the incidence of deep infection were studied. Results The cumulative infection rate after the index total hip arthroplasties rose from 0.8% at 2 years to 1.4% at 20 years; 9.6% of the index operations required further surgery. When infections attributed to these secondary procedures were included, the infection rate rose from 0.9% at 2 years to 2% at 20 years. Although the usual variables increased the incidence of infection, the significant and most precise predictors of infection were radiologic diagnoses of upper pole grade III and protrusio acetabuli, an elevated erythrocyte sedimentation rate, alcoholism and units of blood transfused. Conclusion From 2–20 years, the incidence of deep infection doubled. Preoperative recognition of the first 4 risk factors permits the use of additional prophylactic measures. Spinal or epidural anesthesia reduced the units of blood transfused (the fifth risk factor) and, hence, the risk of infection. Although most deep infections are seeded while the wound is open, there are many possible postoperative causes. In this study, fewer than one-third of the infections that presented after 2 years were related to hematogenous spread. The efficacy of clean air technology was supported, and it is recommended that all measures that may reduce the incidence of deep infection be employed. PMID:18377751

Selection of a Non-ODC Solvent for Rubber Processing Equipment Cleaning

NASA Technical Reports Server (NTRS)

Morgan, R. E.; Thornton, T. N.; Semmel, L.; Selvidge, S. A.; Cash, Steve (Technical Monitor)

2002-01-01

NASA/MSFC has recently acquired new equipment for the manufacture and processing of rubber and rubber containing items that are used in the RSRM (Reusable Solid Rocket Motor) system. Work with a previous generation of rubber equipment at MSFC (Marshall Space Flight Center) in the 1970's had involved the use of ODC's such as 1,1,1-Trichloroethane or VOC's such as Toluene as the solvents of choice in cleaning the equipment. Neither of these options is practical today. This paper addresses the selection and screening of candidate cleaning solvents that are not only effective, but also meet the new environmental standards.

Selection of a Non-ODC Solvent for Rubber Processing Equipment Cleaning

NASA Technical Reports Server (NTRS)

Morgan, R. E.; Thornton, T. N.; Semmel, L.; Selvidge, S. A.

2003-01-01

NASA/MSFC has recently acquired new equipment for the manufacture and processing of rubber and rubber containing items that are used in the Redesigned Solid Rocket Motor (RSRM) system. Work with a previous generation of rubber equipment at MSFC in the 1970's had involved the use of Oxygen Deficient Center (ODC's) such as 1,1,1-Trichloroethane or VOC's such as Toluene as the solvents of choice in cleaning the equipment. Neither of these options is practical today. This paper addresses the selection and screening of candidate cleaning solvents that are not only effective, but also meet the new environmental standards.

Outdoor cooking prevalence in developing countries and its implication for clean cooking policies

NASA Astrophysics Data System (ADS)

Langbein, Jörg; Peters, Jörg; Vance, Colin

2017-11-01

More than 3 billion people use wood fuels for their daily cooking needs, with detrimental health implications related to smoke emissions. Best practice global initiatives emphasize the dissemination of clean cooking stoves, but these are often expensive and suffer from interrupted supply chains that do not reach rural areas. This emphasis neglects that many households in the developing world cook outdoors. Our calculations suggest that for such households, the use of less expensive biomass cooking stoves can substantially reduce smoke exposure. The cost-effectiveness of clean cooking policies can thus be improved by taking cooking location and ventilation into account.

Environmental cleaning and disinfection.

PubMed

Traverse, Michelle; Aceto, Helen

2015-03-01

The guidelines in this article provide veterinarians, veterinary technicians, and veterinary health care workers with an overview of evidence-based recommendations for the best practices associated with environmental cleaning and disinfection of a veterinary clinic that deals with small animals. Hospital-associated infections and the control and prevention programs necessary to alleviate them are addressed from an environmental perspective. Measures of hospital cleaning and disinfection include understanding mechanisms and types of contamination in veterinary settings, recognizing areas of potential concern, addressing appropriate decontamination techniques and selection of disinfectants, the management of potentially contaminated equipment, laundry, and waste management, and environmental surveillance strategies. Copyright © 2015 Elsevier Inc. All rights reserved.

International Assistance for Low-Emission Development Planning: Coordinated Low Emissions Assistance Network (CLEAN) Inventory of Activities and Tools--Preliminary Trends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, S.; Benioff, R.

2011-05-01

The Coordinated Low Emissions Assistance Network (CLEAN) is a voluntary network of international practitioners supporting low-emission planning in developing countries. The network seeks to improve quality of support through sharing project information, tools, best practices and lessons, and by fostering harmonized assistance. CLEAN has developed an inventory to track and analyze international technical support and tools for low-carbon planning activities in developing countries. This paper presents a preliminary analysis of the inventory to help identify trends in assistance activities and tools available to support developing countries with low-emission planning.

Soldering and brazing safety guide: A handbook on space practice for those involved in soldering and brazing

NASA Astrophysics Data System (ADS)

This manual provides those involved in welding and brazing with effective safety procedures for use in performance of their jobs. Hazards exist in four types of general soldering and brazing processes: (1) cleaning; (2) application of flux; (3) application of heat and filler metal; and (4) residue cleaning. Most hazards during those operations can be avoided by using care, proper ventilation, protective clothing and equipment. Specific process hazards for various methods of brazing and soldering are treated. Methods to check ventilation are presented as well as a check of personal hygiene and good maintenance practices are stressed. Several emergency first aid treatments are described.

Practical considerations and nuances in anesthesia for patients undergoing deep brain stimulation implantation surgery.

PubMed

Scharpf, Danielle Teresa; Sharma, Mayur; Deogaonkar, Milind; Rezai, Ali; Bergese, Sergio D

2015-08-01

The field of functional neurosurgery has expanded in last decade to include newer indications, new devices, and new methods. This advancement has challenged anesthesia providers to adapt to these new requirements. This review aims to discuss the nuances and practical issues that are faced while administering anesthesia for deep brain stimulation surgery.

Evaluation of the hygiene of ready-to-eat food preparation areas and practices in mobile food vendors in the UK.

PubMed

Little, Christine; Sagoo, Satnam

2009-12-01

This study was undertaken to assess the cleanliness of food preparation areas, cleaning methods used, and the microbiological quality of water used by 1258 mobile food vendors in the UK. Samples collected included potable water (1102), cleaning cloths (801) and environmental swabs from food preparation surfaces (2704). Cleaning cloths were more heavily contaminated with Aerobic Colony Counts, Enterobacteriaceae, Escherichia coli, and Staphylococcus aureus compared to surfaces sampled. Surfaces that were visually dirty, wet, and chopping boards that were plastic or damaged also had high levels of these bacteria. Fifty-four percent of potable water samples were of poor microbiological quality; i.e. contained coliforms, E. coli and/or enterococci. A documented food safety management system was only evident in 40.1% of vendors and cleaning schedules were only used by 43.6%. Deficiencies in the correct use of cleaning materials, such as dilution factors and the minimum contact time for disinfectants, were identified.

Design and development of automatic sharia compliant wheelchair wheels cleaner

NASA Astrophysics Data System (ADS)

Shaari, Muhammad Farid; Rasli, Ibrahim Ismail Mohammad; Jamaludin, M. Z. Z. Wan; Isa, W. A. Mohamad; M., H.; Rashid, A. H. Abdul

2017-04-01

Sharia compliant wheelchair wheel cleaner was developed in order to assist the muslim Person with Disabilities (PWD) to pray in the mosque without leaving their wheelchair because of the filthy wheels. Though there are many wheelchair wheel cleaning system in the market, it is very rare to find sharia compliant cleaning system that applies sertu concept which is one of the cleaning and purification technique in Islamic practice. The sertu concept is based on 6:1 ratio that refers to the six times pipe water cleaning and one time soiled water cleaning. The development process consists of design stage, fabrication and system installation stage and followed by testing stage. During the design stage, the proposed prototype underwent design brainstorming, operation programming and structural simulation analysis. Once fabricated, the cleaner prototype underwent was tested. The results showed that the prototype can cater load up to 100kg with 1.31×10-6 mm shaft bending displacement. The water ejection timing varied approximately 3% compared to the program.

Current evidence supporting mucosal healing and deep remission as important treatment goals for inflammatory bowel disease.

PubMed

Pineton de Chambrun, Guillaume; Blanc, Pierre; Peyrin-Biroulet, Laurent

2016-08-01

Mucosal healing (MH) is now considered as a major treatment goal in clinical trials and clinical practice for patients with inflammatory bowel disease (IBD). MH is associated with sustained clinical remission, steroid-free remission, and reduced rates of hospitalization and surgery. There is a well-known disconnect between clinical symptoms and mucosal lesions that is more pronounced in CD. More stringent therapeutic goals have been discussed recently such as deep remission defined as clinical remission associated with MH. Recent international guidelines from the IOIBD recommended deep remission as a treatment goal in clinical practice. However there is no validated definition of deep remission in IBD. Also, the efficacy of available drugs to induce and maintain deep remission in IBD is poorly known. Finally, whether deep remission is the best way to modify the course of IBD and whether it should be achieved before considering drug de-escalation have to be formally evaluated in upcoming disease-modification trials.

Assessment of test methods for evaluating effectiveness of cleaning flexible endoscopes.

PubMed

Washburn, Rebecca E; Pietsch, Jennifer J

2018-06-01

Strict adherence to each step of reprocessing is imperative to removing potentially infectious agents. Multiple methods for verifying proper reprocessing exist; however, each presents challenges and limitations, and best practice within the industry has not been established. Our goal was to evaluate endoscope cleaning verification tests with particular interest in the evaluation of the manual cleaning step. The results of the cleaning verification tests were compared with microbial culturing to see if a positive cleaning verification test would be predictive of microbial growth. This study was conducted at 2 high-volume endoscopy units within a multisite health care system. Each of the 90 endoscopes were tested for adenosine triphosphate, protein, microbial growth via agar plate, and rapid gram-negative culture via assay. The endoscopes were tested in 3 locations: the instrument channel, control knob, and elevator mechanism. This analysis showed substantial level of agreement between protein detection postmanual cleaning and protein detection post-high-level disinfection at the control head for scopes sampled sequentially. This study suggests that if protein is detected postmanual cleaning, there is a significant likelihood that protein will also be detected post-high-level disinfection. It also infers that a cleaning verification test is not predictive of microbial growth. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Self-Reported Halitosis in relation to Oral Hygiene Practices, Oral Health Status, General Health Problems, and Multifactorial Characteristics among Workers in Ilala and Temeke Municipals, Tanzania

PubMed Central

Mumghamba, E. G.

2017-01-01

Aim. To assess self-reported halitosis, oral hygiene practices, oral health conditions, general health problems, sociodemographic factors, and behavioural and psychological characteristics among workers in Ilala and Temeke municipals. Materials and Methods. This was a cross-sectional descriptive study. Four hundred workers were recruited using a self-administered structured questionnaire. Results. Self-reported tooth brushing practice was 100%, tongue cleaning 58.5%, dental flossing 4.3%, gum bleeding on tooth brushing 79.3%, presence of hard deposits on teeth 32%, mobile teeth 15.3%, and self-reported halitosis (SRH) 48.5%. Tea users were 95%, coffee users 75.8%, smokers 21%, and alcohol consumers 47%. The SRH was significantly associated with bleeding gums, hard deposits, and mobile and malaligned teeth. Tongue cleaning and regular change of toothbrush were associated with low prevalence of SRH (P < 0.001). Higher occurrence of SRH was significantly related to low education and smoking. Conclusion. Self-reported halitosis was prevalent among workers and was significantly associated with bleeding gums, hard dental deposits, mobile teeth, and smoking. All participants brushed their teeth and cleaned the tongue regularly but use of dental floss was extremely low. Oral health education and health promotion are recommended. PMID:28280509

Self-Reported Halitosis in relation to Oral Hygiene Practices, Oral Health Status, General Health Problems, and Multifactorial Characteristics among Workers in Ilala and Temeke Municipals, Tanzania.

PubMed

Kayombo, C M; Mumghamba, E G

2017-01-01

Aim. To assess self-reported halitosis, oral hygiene practices, oral health conditions, general health problems, sociodemographic factors, and behavioural and psychological characteristics among workers in Ilala and Temeke municipals. Materials and Methods. This was a cross-sectional descriptive study. Four hundred workers were recruited using a self-administered structured questionnaire. Results. Self-reported tooth brushing practice was 100%, tongue cleaning 58.5%, dental flossing 4.3%, gum bleeding on tooth brushing 79.3%, presence of hard deposits on teeth 32%, mobile teeth 15.3%, and self-reported halitosis (SRH) 48.5%. Tea users were 95%, coffee users 75.8%, smokers 21%, and alcohol consumers 47%. The SRH was significantly associated with bleeding gums, hard deposits, and mobile and malaligned teeth. Tongue cleaning and regular change of toothbrush were associated with low prevalence of SRH ( P < 0.001). Higher occurrence of SRH was significantly related to low education and smoking. Conclusion. Self-reported halitosis was prevalent among workers and was significantly associated with bleeding gums, hard dental deposits, mobile teeth, and smoking. All participants brushed their teeth and cleaned the tongue regularly but use of dental floss was extremely low. Oral health education and health promotion are recommended.

Hand Washing Practices Among Emergency Medical Services Providers.

PubMed

Bucher, Joshua; Donovan, Colleen; Ohman-Strickland, Pamela; McCoy, Jonathan

2015-09-01

Hand hygiene is an important component of infection control efforts. Our primary and secondary goals were to determine the reported rates of hand washing and stethoscope cleaning in emergency medical services (EMS) workers, respectively. We designed a survey about hand hygiene practices. The survey was distributed to various national EMS organizations through e-mail. Descriptive statistics were calculated for survey items (responses on a Likert scale) and subpopulations of survey respondents to identify relationships between variables. We used analysis of variance to test differences in means between the subgroups. There were 1,494 responses. Overall, reported hand hygiene practices were poor among pre-hospital providers in all clinical situations. Women reported that they washed their hands more frequently than men overall, although the differences were unlikely to be clinically significant. Hygiene after invasive procedures was reported to be poor. The presence of available hand sanitizer in the ambulance did not improve reported hygiene rates but improved reported rates of cleaning the stethoscope (absolute difference 0.4, p=0.0003). Providers who brought their own sanitizer were more likely to clean their hands. Reported hand hygiene is poor amongst pre-hospital providers. There is a need for future intervention to improve reported performance in pre-hospital provider hand washing.

Hand Washing Practices Among Emergency Medical Services Providers

PubMed Central

Bucher, Joshua; Donovan, Colleen; Ohman-Strickland, Pamela; McCoy, Jonathan

2015-01-01

Introduction Hand hygiene is an important component of infection control efforts. Our primary and secondary goals were to determine the reported rates of hand washing and stethoscope cleaning in emergency medical services (EMS) workers, respectively. Methods We designed a survey about hand hygiene practices. The survey was distributed to various national EMS organizations through e-mail. Descriptive statistics were calculated for survey items (responses on a Likert scale) and subpopulations of survey respondents to identify relationships between variables. We used analysis of variance to test differences in means between the subgroups. Results There were 1,494 responses. Overall, reported hand hygiene practices were poor among pre-hospital providers in all clinical situations. Women reported that they washed their hands more frequently than men overall, although the differences were unlikely to be clinically significant. Hygiene after invasive procedures was reported to be poor. The presence of available hand sanitizer in the ambulance did not improve reported hygiene rates but improved reported rates of cleaning the stethoscope (absolute difference 0.4, p=0.0003). Providers who brought their own sanitizer were more likely to clean their hands. Conclusion Reported hand hygiene is poor amongst pre-hospital providers. There is a need for future intervention to improve reported performance in pre-hospital provider hand washing. PMID:26587098

Green initiative impact on stock prices: A quantitative study of the clean energy industry

NASA Astrophysics Data System (ADS)

Jurisich, John M.

The purpose of this quantitative ex post facto research study was to explore the relationship between green initiative expense disclosures and stock prices of 46 NASDAQ listed Clean Edge Green Energy global companies from 2007 to 2010. The independent variables were sales and marketing, environmental, customer and supplier, community, and corporate governance practices that were correlated with the dependent variable in the study of stock prices. Expense disclosures were examined in an effort to measure the impact of green initiative programs and to expose the interrelationships between green initiative expense disclosures and fluctuations of stock prices. The data for the research was secondary data from existing annual reports. A statistically significant relationship was revealed between environmental practices and changes in stock prices. The study results also provided substantial evidence for leadership and managerial decision making to reduce or increase green initiative practices to maximize shareholder wealth of their respective organizations.

Infection control in delivery care units, Gujarat state, India: A needs assessment

PubMed Central

2011-01-01

Background Increasingly, women in India attend health facilities for childbirth, partly due to incentives paid under government programs. Increased use of health facilities can alleviate the risks of infections contracted in unhygienic home deliveries, but poor infection control practices in labour and delivery units also cause puerperal sepsis and other infections of childbirth. A needs assessment was conducted to provide information on procedures and practices related to infection control in labour and delivery units in Gujarat state, India. Methods Twenty health care facilities, including private and public primary health centres and referral hospitals, were sampled from two districts in Gujarat state, India. Three pre-tested tools for interviewing and for observation were used. Data collection was based on existing infection control guidelines for clean practices, clean equipment, clean environment and availability of diagnostics and treatment. The study was carried out from April to May 2009. Results Seventy percent of respondents said that standard infection control procedures were followed, but a written procedure was only available in 5% of facilities. Alcohol rubs were not used for hand cleaning and surgical gloves were reused in over 70% of facilities, especially for vaginal examinations in the labour room. Most types of equipment and supplies were available but a third of facilities did not have wash basins with "hands-free" taps. Only 15% of facilities reported that wiping of surfaces was done immediately after each delivery in labour rooms. Blood culture services were available in 25% of facilities and antibiotics are widely given to women after normal delivery. A few facilities had data on infections and reported rates of 3% to 5%. Conclusions This study of current infection control procedures and practices during labour and delivery in health facilities in Gujarat revealed a need for improved information systems, protocols and procedures, and for training and research. Simply incentivizing the behaviour of women to use health facilities for childbirth via government schemes may not guarantee safe delivery. PMID:21599924

Effectiveness of reprocessing for flexible bronchoscopes and endobronchial ultrasound bronchoscopes.

PubMed

Ofstead, Cori L; Quick, Mariah R; Wetzler, Harry P; Eiland, John E; Heymann, Otis L; Sonetti, David A; Ferguson, J Scott

2018-05-30

Infections have been linked to inadequately-reprocessed flexible bronchoscopes, and recent investigations determined that pathogen transmission occurred even when bronchoscope cleaning and disinfection practices aligned with current guidelines. This multisite, prospective study evaluated the effectiveness of real-world bronchoscope reprocessing methods using a systematic approach. This study involved direct observation of reprocessing methods for flexible bronchoscopes, multifaceted evaluations performed after manual cleaning and after high-level disinfection, and assessments of storage conditions. Visual inspections of ports and channels were performed using lighted magnification and borescopes. Contamination was detected using microbial cultures and tests for protein, hemoglobin, and adenosine triphosphate. Researchers assessed reprocessing practices, and storage cabinet cleanliness was evaluated by visual inspection and adenosine triphosphate tests. Researchers examined 24 clinically used bronchoscopes. After manual cleaning, 100% of bronchoscopes had residual contamination. Microbial growth was found in 14 (58%) fully-reprocessed bronchoscopes, including mold, Stenotrophomonas maltophilia, and Escherichia coli/Shigella spp. Visible irregularities were observed in 100% of bronchoscopes, including retained fluid; brown, red, or oily residue; scratches; damaged insertion tubes and distal ends; and filamentous debris in channels. Reprocessing practices were substandard at two of three sites. Damaged and contaminated bronchoscopes were in use at all sites. Inadequate reprocessing practices may have contributed to bioburden found on bronchoscopes. However, even when guidelines were followed, high-level disinfection was not effective. A shift toward the use of sterilized bronchoscopes is recommended. In the meantime, quality management programs and updated reprocessing guidelines are needed. Copyright © 2018. Published by Elsevier Inc.

Deep nursing: a thoughtful, co-created nursing process.

PubMed

Griffiths, Colin

2017-03-30

This article examines some of the challenges in nursing practice experienced by patients and nurses in the UK and Ireland, and considers some of the associated stressors in the system. Nurses must respond to these challenges by crafting their own practice, and the article offers a blueprint for developing personal nursing practice through acceptance, paying detailed attention to patients, taking time with patients and personal reflection. It draws on innovations in learning disability practice to suggest that care should be jointly thought through and co-created by patients and nurses, and that this process of thoughtful engagement constitutes 'deep nursing'.

Physical and hydraulic properties of a sandy loam soil under zero, shallow and deep tillage practices

USDA-ARS?s Scientific Manuscript database

Over the centuries, tillage has been an important agronomic practice that has been used to mechanically alter soil properties and enhance the soil ecosystem for growth of crops. A 4-yr study investigated the impact of no-tillage (NT), shallow tillage at a 10-cm depth (ST), and deep tillage at a 30-c...

Sterilization of bacterial endospores by an atmospheric-pressure argon plasma jet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uhm, Han S.; Lim, Jin P.; Li, Shou Z.

2007-06-25

Argon plasma jets penetrate deep into ambient air and create a path for oxygen radicals to sterilize microbes. A sterilization experiment with bacterial endospores indicates that an argon-oxygen plasma jet very effectively kills endospores of Bacillus atrophaeus (ATCC 9372), thereby demonstrating its capability to clean surfaces and its usefulness for reinstating contaminated equipment as free from toxic biological warfare agents. However, the spore-killing efficiency of the atmospheric-pressure argon-oxygen jet depends very sensitively on the oxygen concentration in the argon gas.

India and the 21st Century Power Partnership: Paving the Way to a Smarter, Cleaner, More Resilient System

DOE Office of Scientific and Technical Information (OSTI.GOV)

2017-05-09

The 21st Century Power Partnership (21CPP) aims to accelerate the global transformation of power systems. The Power Partnership is a multilateral effort of the Clean Energy Ministerial (CEM) and serves as a platform for public-private collaboration to advance integrated policy, regulatory, financial, and technical solutions for the large-scale deployment of renewable energy in combination with deep energy efficiency and smart grid solutions. This fact sheet details the 21CPP's work in India.

24th International Symposium on Ballistics

DTIC Science & Technology

2008-09-26

production Samples dimensions were 0.3x0.05 m. Test set up Gas gun 5.5 mm diameter steel spheres and sabot Velocity measuring  systems High speed rate...Oilwell perforators – small caliber shaped charges – create the pathway for oil or gas to flow from the reservoir rock into the wellbore  Deep, clean ...overburden, tectonic) – Pore fluid pressure – Pore fluid type ( liquid vs. gas ) Background  Geomechanics considerations: – In-situ stresses (“total

Tribal Waste Management Program

EPA Pesticide Factsheets

The EPA’s Tribal Waste Management Program encourages environmentally sound waste management practices that promote resource conservation through recycling, recovery, reduction, clean up, and elimination of waste.

Implementing a research utilization plan for prevention of deep vein thrombosis.

PubMed

Van Wicklin, Sharon A; Ward, Karen S; Cantrell, Shirley W

2006-06-01

Ensuring use of best practices is crucially important in today's health care system. Nurses can identify research results that offer promising new treatment options for their patients and should have a plan for implementing research findings. The perioperative education coordinator at one facility identified the occurrence of deep vein thrombosis as a significant problem. She conducted a literature review, created an education program for nurses, and implemented an evidence-based practice change. This article describes the steps in this process. Now, patients at the facility consistently are assessed for deep vein thrombosis and receive appropriate preventive treatment.

Mechanical Abrasion as a Low Cost Technique for Contamination-Free Sample Acquisition from a Category IVA Clean Platform

NASA Technical Reports Server (NTRS)

Dolgin, B.; Yarbrough, C.; Carson, J.; Troy, R.

2000-01-01

The proposed Mars Sample Transfer Chain Architecture provides Planetary Protection Officers with clean samples that are required for the eventual release from confinement of the returned Martian samples. At the same time, absolute cleanliness and sterility requirement is not placed of any part of the Lander (including the deep drill), Mars Assent Vehicle (MAV), any part of the Orbiting Sample container (OS), Rover mobility platform, any part of the Minicorer, Robotic arm (including instrument sensors), and most of the caching equipment on the Rover. The removal of the strict requirements in excess of the Category IVa cleanliness (Pathfinder clean) is expected to lead to significant cost savings. The proposed architecture assumes that crosscontamination renders all surfaces in the vicinity of the rover(s) and the lander(s) contaminated. Thus, no accessible surface of Martian rocks and soil is Earth contamination free. As a result of the latter, only subsurface samples (either rock or soil) can be and will be collected for eventual return to Earth. Uncontaminated samples can be collected from a Category IVa clean platform. Both subsurface soil and rock samples can be maintained clean if they are collected by devices that are self-contained and clean and sterile inside only. The top layer of the sample is removed in a manner that does not contaminate the collection tools. Biobarrier (e.g., aluminum foil) covering the moving parts of these devices may be used as the only self removing bio-blanket that is required. The samples never leave the collection tools. The lids are placed on these tools inside the collection device. These single use tools with the lid and the sample inside are brought to Earth in the OS. The lids have to be designed impenetrable to the Earth organisms. The latter is a well established art.

Critical evaluation of ex vivo restoration of carious equine maxillary cheek teeth infundibulae following high-pressure gas and micro-particle abrasion.

PubMed

Dixon, P M; Savill, D; Horbyl, A; Reardon, R J M; Liuti, T

2014-06-01

Infundibular caries of the equine maxillary cheek teeth is an important disorder that can lead to dental fracture or apical infection. Treatment by removing food debris and carious dental tissue from affected infundibulae using high-pressure abrasion with aluminium hydroxide micro-particles, followed by filling the cleaned defect with endodontic restorative materials is a recommended treatment. However, although anecdotally considered a successful treatment option, there is currently no objective evidence to support this claim. Forty maxillary cheek teeth (CT) that contained 55 infundibulae with caries (mainly grade 2) were extracted post-mortem from 21 adult horses. Five of the CT were sectioned prior to treatment to facilitate visual examination of the carious infundibulae. The remaining carious infundibulae were cleaned using high-pressure abrasion with aluminium hydroxide particles and five CT were sectioned to assess the efficacy of this cleaning process. The remaining 30 CT containing 39 carious infundibulae were then filled with a composite restorative material. The efficacy of this restoration was assessed by computed tomography imaging followed by direct visual examination after sectioning the teeth. Only 46% (18/39) of restored infundibulae, all with shallow (mean 9.6 mm deep) defects, were fully cleaned of food debris and carious material, and filled with restorative material to their full depth. Of these 18, 11 had peripheral defects around the restoration, leaving just 18% (7/39) of restorations without any gross defects. The remaining 54% (21/39) of infundibulae (mean depth of infundibular caries defect, 18.3 mm) still contained food debris and/or carious material in more apical locations, with infundibulae with the deepest caries defects being the least effectively cleaned. The findings of this study indicate that high-pressure micro-particle abrasion is only effective in cleaning food debris from shallow, carious CT infundibulae and consequently, the majority of subsequent infundibular restorations are imperfect. Copyright © 2014. Published by Elsevier Ltd.

THE CLEAN ENERGY-ENVIRONMENT GUIDE TO ACTION ...

EPA Pesticide Factsheets

The Guide to Action identifies and describes sixteen clean energy policies and strategies that are delivering economic and environmental results for states. For each policy, the Guide describes: Objectives and benefits of the policy; Examples of states that have implemented the policy; Responsibilities of key players at the state level, including typical roles of the main stakeholders; Opportunities to coordinate implementation with other federal and state policies, partnerships and technical assistance resources; Best practices for policy design, implementation, and evaluation, including state examples; Action steps for states to take when adopting or modifying their clean energy policies, based on existing state experiences; Resources for additional information on individual state policies, legislative and regulatory language, and analytical tools and methods. States participating in the Clean Energy-Environment State Partnership Program will use the Guide to Action to: Develop their own Clean Energy-Environment Action Plan that is appropriate to their state; Identify the roles and responsibilities of key decision-makers, such as environmental regulators, state legislatures, public utility commissioners, and state energy offices; Access and apply technical assistance resources, models, and tools available for state-specific analyses and program implementation; and Learn from each other as they develop their own clean energy programs and policies.

Glide back booster wind tunnel model testing

NASA Astrophysics Data System (ADS)

Pricop, M. V.; Cojocaru, M. G.; Stoica, C. I.; Niculescu, M. L.; Neculaescu, A. M.; Persinaru, A. G.; Boscoianu, M.

2017-07-01

Affordable space access requires partial or ideally full launch vehicle reuse, which is in line with clean environment requirement. Although the idea is old, the practical use is difficult, requiring very large technology investment for qualification. Rocket gliders like Space Shuttle have been successfullyoperated but the price and correspondingly the energy footprint were found not sustainable. For medium launchers, finally there is a very promising platform as Falcon 9. For very small launchers the situation is more complex, because the performance index (payload to start mass) is already small, versus medium and heavy launchers. For partial reusable micro launchers this index is even smaller. However the challenge has to be taken because it is likely that in a multiyear effort, technology is going to enable the performance recovery to make such a system economically and environmentally feasible. The current paper is devoted to a small unitary glide back booster which is foreseen to be assembled in a number of possible configurations. Although the level of analysis is not deep, the solution is analyzed from the aerodynamic point of view. A wind tunnel model is designed, with an active canard, to enablea more efficient wind tunnel campaign, as a national level premiere.

Dark, Infrared Reflective, and Superhydrophobic Coatings by Waterborne Resins.

PubMed

Zhang, Jing; Lin, Weiqiang; Zhu, Chenxi; Lv, Jian; Zhang, Weicheng; Feng, Jie

2018-05-15

Recently, infrared reflective pigments possessing deep colors have attracted much attention. However, in polluted air, the coatings consisting of such pigments are easily contaminated which abates infrared reflectivity. In this work, black and infrared reflective pigments, fluorine silicon sol and a small number of SiO 2 nanoparticles were introduced into waterborne epoxy resin emulsion and then coated on an aluminum plate. After drying, black coatings with infrared reflective and superhydrophobic (SH) properties were obtained. The average near-infrared (NIR) reflectivity of the coating over wavelength range of 780-2600 nm can reach 68%, which is much larger than that of carbon black coatings and even approaches that of white nano SiO 2 coatings. Under the irradiation of a 275-W infrared lamp (with height 40 cm), the surface temperature of the coating is 63 °C, which is much lower than that of the carbon black coating (90 °C) and only 7 °C higher than that of the white nano SiO 2 coating. Furthermore, the NIR reflective coating exhibited a typical SH property due to its low surface energy and high surface roughness, which may allow for self-cleaning performance in a practical environment, maintaining the coating's NIR reflective property.

7 CFR 58.220 - Drying systems.

Code of Federal Regulations, 2012 CFR

2012-01-01

... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

7 CFR 58.220 - Drying systems.

Code of Federal Regulations, 2011 CFR

2011-01-01

... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

7 CFR 58.220 - Drying systems.

Code of Federal Regulations, 2013 CFR

2013-01-01

... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

7 CFR 58.220 - Drying systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... filter system shall comply with the applicable requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying Systems. The filtering system shall be cleaned or component parts replaced... shall comply with the requirements of the 3-A Accepted Practices for Milk and Milk Products Spray Drying...

Virucidal effects of rodent cage-cleaning practices on the viability of adenovirus vectors.

PubMed

Porter, Jacqueline D; Lyons, Russette M

2002-09-01

Human adenoviruses and adenoviral vectors are classified as Risk Group 2 agents and require BSL2 containment and practices. An additional consideration in using adenoviruses and viral vectors in laboratory animal studies is the possible transmission of these agents to other animals and/or personnel as a result of viral shedding in animal urine and feces. When handling BSL2 agents, cage-wash staff are required to wear appropriate personnel protective equipment, including scrubs, Tyvek suit, hair covering, dust mask, shoes covers, and gloves. Current decontamination procedures are to bag and autoclave soiled rodent cages containing bedding prior to washing in the cage washer to prevent possible adenoviral transmission. However, the practice of autoclaving softens the polycarbonate-based rodent cages, allowing damaging agents or conditions to affect the integrity of the plastic and degrade the cages. The objective of this study was to determine whether current rodent cage-cleaning practices produced virucidal effects for use in lieu of or prior to autoclaving the cages. We found that heating an Av3GFP vector in a test tube to a temperature of 74 degrees C (165 degrees F) for 6 min conditions equivalent to those of the cage washer resulted in greater than an 11-log reduction in infectivity of the vector as evaluated by its cytopathic effect on cells. The combination of heating and a liquid, phosphate-free alkaline detergent produced the same reduction in vector infectivity. However, common cage-cleaning solutions alone possessed no virucidal activity. The high temperatures used in cage-washing procedures alone or in combination with a cleaning solution reduced or eliminated the risk of transmission from viral shedding through urine and feces even at vector concentrations far greater than would ever be expected to be present. Autoclaving cages diminishes the stability and integrity of the polycarbonate cages without providing a further reduction in the risk of virus or vector transmission. On the basis of results from this study, new cage-wash recommendations include dumping the contaminated bedding into a HEPA-filtered waste disposal system and autoclaving the bags of bedding before disposal, then cleaning the cages in the rack washer at wash temperatures of 74 degrees C (165 F) and rinse temperatures of 82 degrees C (180 F).

Cleaning and disinfection of patient care items, in relation to small animals.

PubMed

Weese, J Scott

2015-03-01

Patient care involves several medical and surgical items, including those that come into contact with sterile or other high-risk body sites and items that have been used on other patients. These situations create a risk for infection if items are contaminated, and the implications can range from single infections to large outbreaks. To minimize the risk, proper equipment cleaning, disinfection/sterilization, storage, and monitoring practices are required. Risks posed by different items; the required level of cleaning, disinfection, or sterilization; the methods that are available and appropriate; and how to ensure efficacy, must be considered when designing and implementing an infection control program. Copyright © 2015 Elsevier Inc. All rights reserved.

Clean home-delivery in rural Southern Tanzania: barriers, influencers, and facilitators.

PubMed

Shamba, Donat D; Schellenberg, Joanna; Penfold, Suzanne C; Mashasi, Irene; Mrisho, Mwifadhi; Manzi, Fatuma; Marchant, Tanya; Tanner, Marcel; Mshinda, Hassan; Schellenberg, David; Hill, Zelee

2013-03-01

The study explored the childbirth-related hygiene and newborn care practices in home-deliveries in Southern Tanzania and barriers to and facilitators of behaviour change. Eleven home-birth narratives and six focus group discussions were conducted with recently-delivering women; two focus group discussions were conducted with birth attendants. The use of clean cloth for delivery was reported as common in the birth narratives; however, respondents did not link its use to newborn's health. Handwashing and wearing of gloves by birth attendants varied and were not discussed in terms of being important for newborn's health, with few women giving reasons for this behaviour. The lack of handwashing and wearing of gloves was most commonly linked to the lack of water, gloves, and awareness. A common practice was the insertion of any family member's hands into the vagina of delivering woman to check labour progress before calling the birth attendant. The use of a new razor blade to cut the cord was near-universal; however, the cord was usually tied with a used thread due to the lack of knowledge and the low availability of clean thread. Applying something to the cord was near-universal and was considered essential for newborn's health. Three hygiene practices were identified as needing improvement: family members inserting a hand into the vagina of delivering woman before calling the birth attendant, the use of unclean thread, and putting substances on the cord. Little is known about families conducting internal checks of women in labour, and more research is needed before this behaviour is targeted in interventions. The use of clean thread as cord-tie appears acceptable and can be addressed, using the same channels and methods that were used for successfully encouraging the use of new razor blade.

Impact of cleaning and other interventions on the reduction of hospital-acquired Clostridium difficile infections in two hospitals in England assessed using a breakpoint model.

PubMed

Hughes, G J; Nickerson, E; Enoch, D A; Ahluwalia, J; Wilkinson, C; Ayers, R; Brown, N M

2013-07-01

Clostridium difficile infection remains a major challenge for hospitals. Although targeted infection control initiatives have been shown to be effective in reducing the incidence of hospital-acquired C. difficile infection, there is little evidence available to assess the effectiveness of specific interventions. To use statistical modelling to detect substantial reductions in the incidence of C. difficile from time series data from two hospitals in England, and relate these time points to infection control interventions. A statistical breakpoints model was fitted to likely hospital-acquired C. difficile infection incidence data from a teaching hospital (2002-2009) and a district general hospital (2005-2009) in England. Models with increasing complexity (i.e. increasing the number of breakpoints) were tested for an improved fit to the data. Partitions estimated from breakpoint models were tested for individual stability using statistical process control charts. Major infection control interventions from both hospitals during this time were grouped according to their primary target (antibiotics, cleaning, isolation, other) and mapped to the model-suggested breakpoints. For both hospitals, breakpoints coincided with enhancements to cleaning protocols. Statistical models enabled formal assessment of the impact of different interventions, and showed that enhancements to deep cleaning programmes are the interventions that have most likely led to substantial reductions in hospital-acquired C. difficile infections at the two hospitals studied. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

KSC-98pc1194

NASA Image and Video Library

1998-10-01

Workers at this clean room facility, Cape Canaveral Air Station, prepare to lift the protective can that covered Deep Space 1 during transportation from KSC. The spacecraft will undergo spin testing at the site. Deep Space 1, the first flight in NASA's New Millennium Program, is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include a solar-powered ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. The ion propulsion engine is the first non-chemical propulsion to be used as the primary means of propelling a spacecraft. Deep Space 1 will complete most of its mission objectives within the first two months, but may also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999. The spacecraft will be launched aboard a Boeing Delta 7326 rocket from Launch Pad 17A, Cape Canaveral Air Station, in October. Delta II rockets are medium capacity expendable launch vehicles derived from the Delta family of rockets built and launched since 1960. Since then there have been more than 245 Delta launches

Reducing hazardous cleaning product use: a collaborative effort.

PubMed

Pechter, Elise; Azaroff, Lenore S; López, Isabel; Goldstein-Gelb, Marcy

2009-01-01

Workplace hazards affecting vulnerable populations of low-wage and immigrant workers present a special challenge to the practice of occupational health. Unions, Coalition for Occupational Safety and Health (COSH) groups, and other organizations have developed worker-led approaches to promoting safety. Public health practitioners can provide support for these efforts. This article describes a successful multiyear project led by immigrant cleaning workers with their union, the Service Employees International Union (SEIU) Local 615, and with support from the Massachusetts COSH (MassCOSH) to address exposure to hazardous chemicals. After the union had identified key issues and built a strategy, the union and MassCOSH invited staff from the Massachusetts Department of Public Health's Occupational Health Surveillance Program (OHSP) to provide technical information about health effects and preventive measures. Results included eliminating the most hazardous chemicals, reducing the number of products used, banning mixing products, and improving safety training. OHSP's history of public health practice regarding cleaning products enabled staff to respond promptly. MassCOSH's staff expertise and commitment to immigrant workers allowed it to play a vital role.

Effectiveness of Surface Cleaning and Disinfection in a Brazilian Healthcare Facility

PubMed Central

Santos-Junior, Aires G.; Ferreira, Adriano M.; Frota, Oleci P.; Rigotti, Marcelo A.; Barcelos, Larissa da S.; Lopes de Sousa, Alvaro Francisco; de Andrade, Denise; Guerra, Odanir G.; R. Furlan, Mara C.

2018-01-01

Background: Failures in the processes of cleaning and disinfecting health service surfaces may result in the spread and transfer of pathogens that are often associated with healthcare-related infections and outbreaks. Aims: To assess the effectiveness of environmental surface cleaning and disinfection in a hospital clinic. Method: The study was conducted in a nursing ward with 45 beds. A total of 80 samples from five high-touch surfaces were evaluated before and after cleaning and disinfection, using the following methods: visual inspection, adenosine triphosphate bioluminescence assay, aerobic colony count, Staphylococcus aureus colony count, and evaluation of resistance to methicillin. The data analysis used nonparametric comparative and correlative tests to observe any differences in the pre- and post- cleaning and disinfection results for the surfaces assessed. Results: Effective cleaning and disinfection had a significant effect on only two surfaces when measured for the presence of adenosine triphosphate, the inner bathroom door handle (p=0.007) and the toilet bowl (p=0.01). When evaluated for Staphylococcus aureus colony count, the toilet flush handle also demonstrated a significant effect (p=0.04). Conclusion: The effectiveness of cleaning and disinfection of the surfaces tested was not satisfactory. An educational intervention is recommended for the cleaning and disinfection staff and the nursing team at the healthcare facility. Relevance to Clinical Practice: The data in the study revealed that daily hospital cleaning and disinfection in the sampled sites are not sufficient in medical and surgical wards. Hospital cleanliness must be reevaluated from the point of view of materials, such as an adequate supply of clean cloths, in addition to establishing more precise cleanliness protocols and accurate monitoring systems. PMID:29643951

Certified Athletic Trainers' Knowledge of Methicillin-Resistant Staphylococcus aureus and Common Disinfectants

PubMed Central

Kahanov, Leamor; Gilmore, Elizabeth J.; Eberman, Lindsey E.; Roberts, Jeffrey; Semerjian, Tamar; Baldwin, Linda

2011-01-01

Context: Methicillin-resistant Staphylococcus aureus (MRSA) infections are increasingly common in athletic settings. The MRSA knowledge and infection-control practices of certified athletic trainers (ATs) and the cleanliness of the athletic training room are important factors in preventing MRSA infections. Objective: To assess knowledge of MRSA and the use of common disinfectants among ATs and to explore their infection-control practices. Design: Cross-sectional study. Setting: High school and collegiate athletic training rooms. Patients or Other Participants: A total of 163 ATs from National Collegiate Athletic Association Divisions I, II, and III and high schools, representing all 10 National Athletic Trainers' Association districts. Main Outcome Measure(s): Frequencies, analyses of variance, and χ2 tests were used to assess current practices and opinions and relationships between factors. Results: Methicillin-resistant Staphylococcus aureus was perceived as a national problem by 92% of respondents; 57% perceived MRSA as a problem in their practice setting. Most respondents had treated general infections (88%), staphylococcal infections (75%), and MRSA infections (57%). Male sex was associated with treating all 3 types of infections (χ2 test, P < .05). Noncurriculum education was associated with a lack of recognition of environmental issues as risk factors and with the use of isopropyl alcohol for disinfection (χ2 test, P < .05). For example, 10% of respondents did not recognize that contaminated whirlpools can be a source of MRSA infection. Respondents also incorrectly identified effective cleaning solutions. Thirty percent of respondents cleaned their hands frequently or sometimes before treating each athlete and 35% cleaned their hands sometimes, occasionally, or never after seeing each athlete. Conclusions: The majority of ATs were informed about MRSA and made correct disinfection choices. However, improvements are still needed, and not all ATs were using proper disinfection practices. PMID:21944074

Physician-reported practices on continuous deep sedation until death: A descriptive and comparative study.

PubMed

Papavasiliou, Evangelia Evie; Chambaere, Kenneth; Deliens, Luc; Brearley, Sarah; Payne, Sheila; Rietjens, Judith; Vander Stichele, Robert; Van den Block, Lieve

2014-06-01

Research on continuous deep sedation until death has focused on estimating prevalence and describing clinical practice across care settings. However, evidence on sedation practices by physician specialty is scarce. To compare and contrast physician-reported practices on continuous deep sedation until death between general practitioners and medical specialists. A secondary analysis drawing upon data from a large-scale, population-based, retrospective survey among physicians in Flanders, Belgium in 2007. Symptom prevalence and characteristics of sedation (drugs used, artificial nutrition and hydration administered, intentions, and decision-making) were measured. Response rate was 58.4%. The frequency of continuous deep sedation until death among all deaths was 11.3% for general practitioners and 18.4% for medical specialists. General practitioners reported significantly higher rates of severity and mean intensity of pain, delirium, dyspnea, and nausea in the last 24 h of life for sedated patients and a higher number of severe symptoms than medical specialists. No differences were found between groups in the drugs used, except in propofol, reported only by medical specialists (in 15.8% of all cases). Artificial nutrition and hydration was withheld or withdrawn in 97.2% of general practitioner and 36.2% of medical specialist cases. Explicit life-shortening intentions were reported by both groups (for 3%-4% of all cases). Continuous deep sedation until death was initiated without consent or request of either the patient or the family in 27.9% (medical specialists) and 4.7% (general practitioners) of the cases reported. Considerable variation, often largely deviating from professional guidelines, was observed in physician-reported performance and decision-making, highlighting the importance of providing clearer guidance on the specific needs of the context in which continuous deep sedation until death is to be performed. © The Author(s) 2014.

Policies to Enable Bioenergy Deployment: Key Considerations and Good Practices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smolinksi, Sharon; Cox, Sadie

2016-05-01

Bioenergy is renewable energy generated from biological source materials, and includes electricity, transportation fuels and heating. Source materials are varied types of biomass, including food crops such as corn and sugarcane, non-edible lignocellulosic materials such as agricultural and forestry waste and dedicated crops, and municipal and livestock wastes. Key aspects of policies for bioenergy deployment are presented in this brief as part of the Clean Energy Solutions Center's Clean Energy Policy Brief Series.

Autoclave use in dental practice in the Republic of Ireland.

PubMed

Healy, C M; Kearns, H P O; Coulter, W A; Stevenson, M; Burke, F J T

2004-08-01

To assess by postal questionnaire, cross-infection control methods, especially sterilisation procedures, of 700 general dental practitioners in the Republic of Ireland, and to biologically monitor steam pressure sterilisers or autoclaves in their practices. Methods of instrument cleaning and sterilisation, autoclave efficacy. A response rate of 40% with all, except one practitioner, using steam sterilisation. 49% also reported the use of chemical sterilisation with a quarter of these using glutaraldehyde. However, instrument soaking time varied greatly from 2.5 minutes to 74 hours. Methods of instrument cleaning prior to autoclaving were as follows: scrubbing by hand 41.5%, ultrasonic cleaning 7.0%, combination of both 50%. 52.9% of the respondents did not autoclave their dental handpieces and only 44.7% disinfected impressions before sending them to the laboratory. The autoclaves of thirty practitioners (11.3%) did not pass the initial biological test. Following counselling about possible causes of failure, four autoclaves (1.5%) failed a repeat biological test. However, seven practitioners did not return the repeat biological test. Some aspects of recommended cross-infection control procedures are well adhered to, e.g. instrument cleaning, but further education is required in certain key areas, in particular the use of chemical sterilisation, dental handpiece autoclaving and impression disinfection. There is also a need to increase awareness of the importance of routine autoclave servicing and calibration, along with validation and monitoring.

Bacterial contamination of stethoscopes used by health workers: public health implications.

PubMed

Uneke, Chigozie J; Ogbonna, Annayo; Oyibo, Patrick G; Onu, Christian M

2010-08-04

This study was designed to assess both the potential for bacterial transmission by stethoscopes used by health-care workers in Nigeria and the implications for patient safety and control of hospital-acquired infections. A structured questionnaire was administered to health workers and the surface of the diaphragm of their stethoscopes swabbed for bacteriological analysis using standard techniques. Of the 107 stethoscopes surveyed, 84 (79%) were contaminated with bacteria; 59 (81%) of the contaminated stethoscopes belonged to physicians and 25 (74%) were from other health workers. Isolates included Staphylococcus aureus (54%), Pseudomonas aeruginosa (19%), Enterococcus faecalis (14%), and Escherichia coli (13%). All stethoscopes that had never been cleaned were contaminated while lower levels of contamination were found on those cleaned one week or less before the survey (chi(2) = 22.4, P < .05). Contamination was significantly higher on stethoscopes cleaned with only water (100%) compared to those cleaned with alcohol (49%) (chi(2) = 30.17, P < .05). Significantly fewer (9%) stethoscopes from health workers who washed their hands after seeing each patient were contaminated when compared with the instruments (86%) of those who did not practice hand washing (chi(2) = 23.79, P < .05). E. coli showed the highest antibiotic resistance, while S. aureus showed the highest antibiotic susceptibility. Strict adherence to stethoscope disinfection practices by health workers can minimize cross-contamination and ensure improved patient safety in hospital environments.

Short communication: Reactivity of diacetyl with cleaning and sanitizing agents.

PubMed

Rincon-Delgadillo, M I; Lopez-Hernandez, A; Rankin, S A

2013-01-01

Diacetyl is used to impart a buttery flavor to numerous food products such as sour cream, cottage cheese, vegetable oil-based spreads, baked goods, and beverages. Recent studies have linked exposure to high concentrations of diacetyl and the onset of bronchiolitis obliterans. Due to the reported risks that diacetyl may pose, many food companies have altered practices to reduce worker exposure to diacetyl, including the use of personal respirators, improved air handling systems, and adequate cleaning practices. Commonly used cleaning and sanitizing agents may be reactive with diacetyl; however, the efficacy of these chemicals has not been studied in detail and remains unclear. The objective of this work was to study the reaction chemistry of diacetyl with common industrial cleaning and sanitizing chemicals. The reactions were assessed at equimolar concentrations and analyzed by gas chromatography-mass spectrometry. Peroxyacetic acid was most reactive with diacetyl (95% reduction in diacetyl), followed by sodium hypochlorite (76% reduction), and hydrogen peroxide (26% reduction). Benzalkonium chloride (BAC) did not react with diacetyl. Acetic acid was detected as the main product of reactions of diacetyl with peroxyacetic acid, sodium hypochlorite, and hydrogen peroxide. 1,1-Dichloro-2-propanone and 1,1,1-trichloropropanone were also identified as volatile reaction products in the sodium hypochlorite reactions. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Deep and shallow water effects on developing preschoolers' aquatic skills.

PubMed

Costa, Aldo M; Marinho, Daniel A; Rocha, Helena; Silva, António J; Barbosa, Tiago M; Ferreira, Sandra S; Martins, Marta

2012-05-01

The aim of the study was to assess deep and shallow water teaching methods in swimming lessons for preschool children and identify variations in the basic aquatic skills acquired. The study sample included 32 swimming instructors (16 from deep water programs and 16 from shallow water programs) and 98 preschool children (50 from deep water swimming pool and 48 from shallow water swimming pool). The children were also studied regarding their previous experience in swimming (6, 12 and 18 months or practice). Chi-Square test and Fisher's exact test were used to compare the teaching methodology. A discriminant analysis was conducted with Λ wilk's method to predict under what conditions students are better or worse (aquatic competence). Results suggest that regardless of the non-significant variations found in teaching methods, the water depth can affect aquatic skill acquisition - shallow water lessons seem to impose greater water competence particularly after 6 months of practice. The discriminant function revealed a significant association between groups and all predictors for 6 months of swimming practice (p<0.001). Body position in gliding and leg displacements were the main predictors. For 12 and 18 months of practice, the discriminant function do not revealed any significant association between groups. As a conclusion, it seems that the teaching methodology of aquatic readiness based on deep and shallow water programs for preschoolers is not significantly different. However, shallow water lessons could be preferable for the development of basic aquatic skills.

Deep and Shallow Water Effects on Developing Preschoolers’ Aquatic Skills

PubMed Central

Costa, Aldo M.; Marinho, Daniel A.; Rocha, Helena; Silva, António J.; Barbosa, Tiago M.; Ferreira, Sandra S.; Martins, Marta

2012-01-01

The aim of the study was to assess deep and shallow water teaching methods in swimming lessons for preschool children and identify variations in the basic aquatic skills acquired. The study sample included 32 swimming instructors (16 from deep water programs and 16 from shallow water programs) and 98 preschool children (50 from deep water swimming pool and 48 from shallow water swimming pool). The children were also studied regarding their previous experience in swimming (6, 12 and 18 months or practice). Chi-Square test and Fisher’s exact test were used to compare the teaching methodology. A discriminant analysis was conducted with Λ wilk’s method to predict under what conditions students are better or worse (aquatic competence). Results suggest that regardless of the non-significant variations found in teaching methods, the water depth can affect aquatic skill acquisition - shallow water lessons seem to impose greater water competence particularly after 6 months of practice. The discriminant function revealed a significant association between groups and all predictors for 6 months of swimming practice (p<0.001). Body position in gliding and leg displacements were the main predictors. For 12 and 18 months of practice, the discriminant function do not revealed any significant association between groups. As a conclusion, it seems that the teaching methodology of aquatic readiness based on deep and shallow water programs for preschoolers is not significantly different. However, shallow water lessons could be preferable for the development of basic aquatic skills. PMID:23487406

Trends in Continuous Deep Sedation until Death between 2007 and 2013: A Repeated Nationwide Survey

PubMed Central

Cohen, Joachim; Rietjens, Judith

2016-01-01

Background Continuous deep sedation until death is a highly debated medical practice, particularly regarding its potential to hasten death and its proper use in end-of-life care. A thorough analysis of important trends in this practice is needed to identify potentially problematic developments. This study aims to examine trends in the prevalence and practice characteristics of continuous deep sedation until death in Flanders, Belgium between 2007 and 2013, and to study variation on physicians’ degree of palliative training. Methods Population-based death certificate study in 2007 and 2013 in Flanders, Belgium. Reporting physicians received questionnaires about medical practices preceding the patient’s death. Patient characteristics, clinical characteristics (drugs used, duration, artificial nutrition/hydration, intention and consent), and palliative care training of attending physician were recorded. We posed the following question regarding continuous deep sedation: ‘Was the patient continuously and deeply sedated or kept in a coma until death by the use of one or more drugs’. Results After the initial rise of continuous deep sedation to 14.5% in 2007 (95%CI 13.1%-15.9%), its use decreased to 12.0% in 2013 (95%CI 10.9%-13.2%). Compared with 2007, in 2013 opioids were less often used as sole drug and the decision to use continuous deep sedation was more often preceded by patient request. Compared to non-experts, palliative care experts more often used benzodiazepines and less often opioids, withheld artificial nutrition/hydration more often and performed sedation more often after a request from or with the consent of the patient or family. Conclusion Worldwide, this study is the first to show a decrease in the prevalence of continuous deep sedation. Despite positive changes in performance and decision-making towards more compliance with due care requirements, there is still room for improvement in the use of recommended drugs and in the involvement of patients and relatives in the decision-making process. PMID:27337064

Cleaning, disinfection and sterilization of surface prion contamination.

PubMed

McDonnell, G; Dehen, C; Perrin, A; Thomas, V; Igel-Egalon, A; Burke, P A; Deslys, J P; Comoy, E

2013-12-01

Prion contamination is a risk during device reprocessing, being difficult to remove and inactivate. Little is known of the combined effects of cleaning, disinfection and sterilization during a typical reprocessing cycle in clinical practice. To investigate the combination of cleaning, disinfection and/or sterilization on reducing the risk of surface prion contamination. In vivo test methods were used to study the impact of cleaning alone and cleaning combined with thermal disinfection and high- or low-temperature sterilization processes. A standardized test method, based on contamination of stainless steel wires with high titres of scrapie-infected brain homogenates, was used to determine infectivity reduction. Traditional chemical methods of surface decontamination against prions were confirmed to be effective, but extended steam sterilization was more variable. Steam sterilization alone reduced the risk of prion contamination under normal or extended exposure conditions, but did show significant variation. Thermal disinfection had no impact in these studies. Cleaning with certain defined formulations in combination with steam sterilization can be an effective prion decontamination process, in particular with alkaline formulations. Low-temperature, gaseous hydrogen peroxide sterilization was also confirmed to reduce infectivity in the presence and absence of cleaning. Prion decontamination is affected by the full reprocessing cycle used on contaminated surfaces. The correct use of defined cleaning, disinfection and sterilization methods as tested in this report in the scrapie infectivity assay can provide a standard precaution against prion contamination. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Evaluating a new paradigm for comparing surface disinfection in clinical practice.

PubMed

Carling, Philip C; Perkins, Jennifer; Ferguson, JoAnn; Thomasser, Anita

2014-11-01

Despite an increasing understanding of the importance of near-patient surfaces in the transmission of healthcare-associated pathogens, there remains a need to define the relative clinical effectiveness of disinfection interventions. A serial 2-phase evaluation of the clinical effectiveness of 2 surface disinfectants. A general acute care hospital. A unique system for quantifying bioburden reduction while monitoring the possible impact of differences in cleaning thoroughness was used to compare the clinical effectiveness of a traditional quaternary ammonium compound (QAC) and a novel peracetic acid/hydrogen peroxide disinfectant (ND) as part of terminal room cleaning. As a result of QAC cleaning, 93 (40%) of 237 cleaned surfaces confirmed by fluorescent marker (DAZO) removal were found to have complete removal of aerobic bioburden. During the ND phase of the study, bioburden was removed from 211 (77%) of 274 cleaned surfaces. Because there was no difference in the thoroughness of cleaning with either disinfectant (65.3% and 66.4%), the significant ([Formula: see text]) difference in bioburden reduction can be attributed to better cleaning efficacy with the ND. In the context of the study design, the ND was 1.93 times more effective in removing bacterial burden than the QAC ([Formula: see text]). Furthermore, the study design represents a new research paradigm in which 2 interventions can be compared by concomitantly and objectively analyzing both the product and process variables in a manner that can be used to define the relative effectiveness of all disinfection cleaning interventions.

Evaluation of vaccine cold chain in urban health centers of municipal corporation of surat city, Western India.

PubMed

Naik, Ashish K; Rupani, Mihir P; Bansal, R K

2013-12-01

The success of immunization depends highly on the level of cold chain maintenance. The aim of the study was to assess the condition of cold chain equipment, practices adopted for cold chain maintenance and knowledge of the vaccinators. It was a cross-sectional study conducted in 20 UHCs of Surat Municipal Corporation (SMC). Cold chain equipment were observed with regards to their condition, along with the practices adopted by vaccinators for cold chain maintenance. A pre-designed and pre-tested questionnaire was used to interview the vaccinators regarding their knowledge and awareness regarding cold chain practices, management and handling. Data were entered and analyzed using Epi Info v 3.5.1. Simple proportions were calculated. Absence of separate stabilizer for deep freezers and ILRs (85%), ill-maintained temperature-record register, lack of criss-cross pattern of ice packs in deep freezer (65%), presence of things other than ice packs in deep freezer (10%) and things other than vaccines in ILR (10%) indicate poor cold chain maintenance. In addition to this, expired vaccines in ILR (5%), vaccines in the "unusable" stages of VVM (15%), lack of emergency contact number nearby in case of cold chain failure (85%), lack of inverter (85%), lack of generator (85%) and failure to note time of reconstitution on the vaccine vial at the time of vaccination (25%) indicate poor cold chain practices. Lack of knowledge of defrosting of ILR and deep freezer (45%), lack of knowledge about Shake test (40%), lack of knowledge of temperature range to be maintained in deep freezer (70%) and in ILR (15%) indicate poor knowledge of vaccinators. Cold chain maintenance and practices need improvement. Knowledge of vaccinators was overall unsatisfactory.

Generation of dissolved organic matter and byproducts from activated sludge during contact with sodium hypochlorite and its implications to on-line chemical cleaning in MBR.

PubMed

Cai, Weiwei; Liu, Jiaqi; Zhang, Xiangru; Ng, Wun Jern; Liu, Yu

2016-11-01

On-line chemical cleaning of membranes with sodium hypochlorite (NaClO) has been commonly employed for maintaining a constant permeability of membrane bioreactor (MBR) due to its simple and efficient operation. However, activated sludge is inevitably exposed to NaClO during this cleaning process. In spite of the broad applications of on-line chemical cleaning in MBR such as chemical cleaning-in-place (CIP) and chemical enhanced backwash (CEB), little information is currently available for the release of emerging dissolved organic matter (DOM) and byproducts from this prevalent practice. Therefore, in this study, activated sludge suspended in a phosphate buffered saline solution was exposed to different doses of NaClO in order to determine the generation of potential DOM and byproducts. The results showed the occurrence of significant DOM release (up to 24.7 mg/L as dissolved organic carbon) after exposure to NaClO for 30 min. The dominant components of the released DOM were characterized to be humic acid-like as well as protein-like substances by using an excitation-emission matrix fluorescence spectrophotometer. Furthermore, after the contact of activated sludge with NaClO, 19 kinds of chlorinated and brominated byproducts were identified by ultra performance liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry, eight of which were confirmed and characterized with standard compounds. Many byproducts were found to be halogenated aromatic compounds, including halopyrroles and halo(hydro)benzoquinones, which had been reported to be significantly more toxic than the halogenated aliphatic ones. Consequently, this study offers new insights into the practice of on-line chemical cleaning, and opens up a window to re-examine the current operation of MBR by looking into the generation of micropollutants. Copyright © 2016 Elsevier Ltd. All rights reserved.

9 CFR 3.2 - Indoor housing facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... those breeds that cannot tolerate lower temperatures without stress or discomfort (such as short-haired... in maintaining good housekeeping practices, adequate cleaning, adequate inspection of animals, and...

9 CFR 3.2 - Indoor housing facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... those breeds that cannot tolerate lower temperatures without stress or discomfort (such as short-haired... in maintaining good housekeeping practices, adequate cleaning, adequate inspection of animals, and...

9 CFR 3.2 - Indoor housing facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... those breeds that cannot tolerate lower temperatures without stress or discomfort (such as short-haired... in maintaining good housekeeping practices, adequate cleaning, adequate inspection of animals, and...

Countdown to Drawdown: an initial overview of exponential scaling of potential societal tipping points for deep decarbonization of global energy infrastructure by 2050

NASA Astrophysics Data System (ADS)

McCaffrey, Mark; Bhowmik, Avit

2017-04-01

The 194 signatories to the Paris Agreement range in size from small island nations (Tuvalu, less than 10,000 people) to massive states (India and China, which between them have 2.6 billion people). Their cultural backgrounds, political, economic and social systems vary widely. What they all share is an agreement for climate stabilisation at 1.5-2˚ C. A roadmap outlining potential exponential transitions towards a carbon-free economy may benefit from a logarithmic "powers of ten" framework that sets aside backgrounds and systems to examine the relative population concentration scales-from the individual (100) to local/neighborhood (103) to the national/transnational scales (108) and ultimately the global population of around 10 billion anticipated in 2050 (1010). What are the related targets and indicators for successful engagement at each level for rapid and radical reductions of carbon emissions and concentrations? What are the possible interventions and barriers that may be applied at different levels of population concentration? What "drawdown" strategies are most appropriate for different scales? Could focusing demonstrations of clean energy and sustainable practices on the local/neighborhood to urban scale (103-104) provide a leverage that has not been achieved at more complex national and transnational scales? Ultimately, backgrounds and systems are important factors in the equation, but the "powers of 10" scaling framework may provide a compass to assist in identifying the challenges, opportunities and related thresholds and tipping points for achieving deep decarbonization and transformation of the global energy infrastructure at every level of society over the next thirty-three years.

A modeling approach to evaluate the impact of conservation practices on runoff and sediments in Sasumua watershed, Kenya

USDA-ARS?s Scientific Manuscript database

Degradation of agricultural watersheds often reduces their capacity to provide vital environmental services such as food production, clean potable water, water bodies for recreation and generation of hydro-electric power. Soil and water conservation practices on agricultural lands can enhance the ca...

Standard practice for washing and cleaning concrete bridge decks and substructure bridge seats including bridge bearings and expansion joints to prevent structural deterioration.

DOT National Transportation Integrated Search

2013-12-01

This study is a supplement to a previous study of bridge washing practices that focused on steel : superstructures. This study examined the perceived costs and benefits of routine washing of both : steel and concrete bridges, with emphasis on substru...

49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...

49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...

49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...

49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...

49 CFR 195.405 - Protection against ignitions and safe access/egress involving floating roofs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... accordance with API Recommended Practice 2003, unless the operator notes in the procedural manual (§ 195.402(c)) why compliance with all or certain provisions of API Recommended Practice 2003 is not necessary... removed from service for cleaning) are addressed in API Publication 2026. After October 2, 2000, the...

Biosafety level 3 laboratory for autopsies of patients with severe acute respiratory syndrome: principles, practices, and prospects.

PubMed

Li, Ling; Gu, Jiang; Shi, Xicheng; Gong, Encong; Li, Xingwang; Shao, Hongquan; Shi, Xueying; Jiang, Huijun; Gao, Xiaoqiang; Cheng, Daiyun; Guo, Lizhu; Wang, Hao; Shi, Xiaohong; Wang, Peizhi; Zhang, Qianying; Shen, Bing

2005-09-15

During the outbreak of the emergent severe acute respiratory syndrome (SARS) infection, >30% of the approximately 8000 infected persons were health care workers. The highly infectious nature of SARS coronavirus (SARS-CoV) compelled our pathologists to consider biosafety issues in the autopsy room and for tissue processing procedures. A specially designed biosafety level 3 (BSL-3) autopsy laboratory was constructed and divided into a clean area, a semicontaminated area, a contaminated area, and 2 buffer zones. High-efficiency particulate air filters were placed in the air supply and exhaust systems. Laminar air flow was from the clean areas to the less clean areas. The negative pressures of the contaminated, semicontaminated, and clean areas were approximately -50 pa, -25 pa, and -5 pa, respectively. Personal protective equipment, including gas mask, impermeable protective clothing, and 3 layers of gloves worn during autopsies; the equipment was decontaminated before it was allowed to exit the facility. Strict BSL-3 practices were followed. When a given concentration of particulate sarin simulant was introduced into the contaminated area, it could not be detected in either the semicontaminated area or clean area, and particles >0.3 microm in size were not detected in the exhaust air. A total of 16 complete postmortem examinations for probable and suspected SARS were performed during a 2-month period. Of these, 7 reported confirmed cases of SARS. None of the 23 pathologists and technicians who participated in these autopsies was infected with SARS-CoV. Our experience suggests that BSL-3 laboratory operating principles should be among the special requirements for performing autopsies of contaminated bodies and that they can safeguard the clinicians and the environment involved in these procedures.

Tool use for corpse cleaning in chimpanzees

NASA Astrophysics Data System (ADS)

van Leeuwen, Edwin J. C.; Cronin, Katherine A.; Haun, Daniel B. M.

2017-03-01

For the first time, chimpanzees have been observed using tools to clean the corpse of a deceased group member. A female chimpanzee sat down at the dead body of a young male, selected a firm stem of grass, and started to intently remove debris from his teeth. This report contributes novel behaviour to the chimpanzee’s ethogram, and highlights how crucial information for reconstructing the evolutionary origins of human mortuary practices may be missed by refraining from developing adequate observation techniques to capture non-human animals’ death responses.

Best practices in disinfection of noncritical surfaces in the health care setting: creating a bundle for success.

PubMed

Havill, Nancy L

2013-05-01

Because increasing evidence suggests that the environment plays a role in transmission of health care-associated infections, more attention is focusing on environmental cleaning and improving its efficacy. Creating and sustaining a successful cleaning and disinfection program should include several key components using a bundle approach and requires ongoing commitment within the institution. Copyright © 2013 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

State Clean Energy Policies Analysis. State, Utility, and Municipal Loan Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantz, Eric

2010-05-01

This report relies on six in-depth interviews with loan program administrators to provide descriptions of existing programs. Findings from the interviews are combined with a review of relevant literature to elicit best practices and lessons learned from existing loan programs. Data collected from each of the loan programs profiled are used to quantify the impacts of these specific loan programs on the commonly cited, overarching state clean energy goals of energy security, economic development, and environmental protection.

Effect of home-based counselling on newborn care practices in southern Tanzania one year after implementation: a cluster-randomised controlled trial

PubMed Central

2014-01-01

Background In Sub-Saharan Africa over one million newborns die annually. We developed a sustainable and scalable home-based counselling intervention for delivery by community volunteers in rural southern Tanzania to improve newborn care practices and survival. Here we report the effect on newborn care practices one year after full implementation. Methods All 132 wards in the 6-district study area were randomised to intervention or comparison groups. Starting in 2010, in intervention areas trained volunteers made home visits during pregnancy and after childbirth to promote recommended newborn care practices including hygiene, breastfeeding and identification and extra care for low birth weight babies. In 2011, in a representative sample of 5,240 households, we asked women who had given birth in the previous year both about counselling visits and their childbirth and newborn care practices. Results Four of 14 newborn care practices were more commonly reported in intervention than comparison areas: delaying the baby’s first bath by at least six hours (81% versus 68%, OR 2.0 (95% CI 1.2-3.4)), exclusive breastfeeding in the three days after birth (83% versus 71%, OR 1.9 (95% CI 1.3-2.9)), putting nothing on the cord (87% versus 70%, OR 2.8 (95% CI 1.7-4.6)), and, for home births, tying the cord with a clean thread (69% versus 39%, OR 3.4 (95% CI 1.5-7.5)). For other behaviours there was little evidence of differences in reported practices between intervention and comparison areas including childbirth in a health facility or with a skilled attendant, thermal care practices, breastfeeding within an hour of birth and, for home births, the birth attendant having clean hands, cutting the cord with a clean blade and birth preparedness activities. Conclusions A home-based counselling strategy using volunteers and designed for scale-up can improve newborn care behaviours in rural communities of southern Tanzania. Further research is needed to evaluate if, and at what cost, these gains will lead to improved newborn survival. Trial registration Trial Registration Number NCT01022788 (http://www.clinicaltrials.gov, 2009) PMID:25052850

21 CFR 211.52 - Washing and toilet facilities.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities... cold water, soap or detergent, air driers or single-service towels, and clean toilet facilities easily...

21 CFR 211.52 - Washing and toilet facilities.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities... cold water, soap or detergent, air driers or single-service towels, and clean toilet facilities easily...

21 CFR 211.52 - Washing and toilet facilities.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities... cold water, soap or detergent, air driers or single-service towels, and clean toilet facilities easily...

21 CFR 211.52 - Washing and toilet facilities.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities... cold water, soap or detergent, air driers or single-service towels, and clean toilet facilities easily...

21 CFR 211.52 - Washing and toilet facilities.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and Facilities... cold water, soap or detergent, air driers or single-service towels, and clean toilet facilities easily...

9 CFR 3.5 - Mobile or traveling housing facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... temperatures, for those breeds that cannot tolerate lower temperatures without stress or discomfort (such as... sufficient illumination to aid in maintaining good housekeeping practices, adequate cleaning, adequate...

9 CFR 3.5 - Mobile or traveling housing facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... temperatures, for those breeds that cannot tolerate lower temperatures without stress or discomfort (such as... sufficient illumination to aid in maintaining good housekeeping practices, adequate cleaning, adequate...

9 CFR 3.5 - Mobile or traveling housing facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... temperatures, for those breeds that cannot tolerate lower temperatures without stress or discomfort (such as... sufficient illumination to aid in maintaining good housekeeping practices, adequate cleaning, adequate...

Deep sea tests of a prototype of the KM3NeT digital optical module

NASA Astrophysics Data System (ADS)

Adrián-Martínez, S.; Ageron, M.; Aharonian, F.; Aiello, S.; Albert, A.; Ameli, F.; Anassontzis, E. G.; Anghinolfi, M.; Anton, G.; Anvar, S.; Ardid, M.; de Asmundis, R.; Balasi, K.; Band, H.; Barbarino, G.; Barbarito, E.; Barbato, F.; Baret, B.; Baron, S.; Belias, A.; Berbee, E.; van den Berg, A. M.; Berkien, A.; Bertin, V.; Beurthey, S.; van Beveren, V.; Beverini, N.; Biagi, S.; Bianucci, S.; Billault, M.; Birbas, A.; Boer Rookhuizen, H.; Bormuth, R.; Bouché, V.; Bouhadef, B.; Bourlis, G.; Bouwhuis, M.; Bozza, C.; Bruijn, R.; Brunner, J.; Cacopardo, G.; Caillat, L.; Calamai, M.; Calvo, D.; Capone, A.; Caramete, L.; Caruso, F.; Cecchini, S.; Ceres, A.; Cereseto, R.; Champion, C.; Château, F.; Chiarusi, T.; Christopoulou, B.; Circella, M.; Classen, L.; Cocimano, R.; Colonges, S.; Coniglione, R.; Cosquer, A.; Costa, M.; Coyle, P.; Creusot, A.; Curtil, C.; Cuttone, G.; D'Amato, C.; D'Amico, A.; De Bonis, G.; De Rosa, G.; Deniskina, N.; Destelle, J.-J.; Distefano, C.; Donzaud, C.; Dornic, D.; Dorosti-Hasankiadeh, Q.; Drakopoulou, E.; Drouhin, D.; Drury, L.; Durand, D.; Eberl, T.; Eleftheriadis, C.; Elsaesser, D.; Enzenhöfer, A.; Fermani, P.; Fusco, L. A.; Gajana, D.; Gal, T.; Galatà, S.; Gallo, F.; Garufi, F.; Gebyehu, M.; Giordano, V.; Gizani, N.; Gracia Ruiz, R.; Graf, K.; Grasso, R.; Grella, G.; Grmek, A.; Habel, R.; van Haren, H.; Heid, T.; Heijboer, A.; Heine, E.; Henry, S.; Hernández-Rey, J. J.; Herold, B.; Hevinga, M. A.; van der Hoek, M.; Hofestädt, J.; Hogenbirk, J.; Hugon, C.; Hößl, J.; Imbesi, M.; James, C.; Jansweijer, P.; Jochum, J.; de Jong, M.; Kadler, M.; Kalekin, O.; Kappes, A.; Kappos, E.; Katz, U.; Kavatsyuk, O.; Keller, P.; Kieft, G.; Koffeman, E.; Kok, H.; Kooijman, P.; Koopstra, J.; Korporaal, A.; Kouchner, A.; Koutsoukos, S.; Kreykenbohm, I.; Kulikovskiy, V.; Lahmann, R.; Lamare, P.; Larosa, G.; Lattuada, D.; Le Provost, H.; Leisos, A.; Lenis, D.; Leonora, E.; Lindsey Clark, M.; Liolios, A.; Llorens Alvarez, C. D.; Löhner, H.; Lo Presti, D.; Louis, F.; Maccioni, E.; Mannheim, K.; Manolopoulos, K.; Margiotta, A.; Mariş, O.; Markou, C.; Martínez-Mora, J. A.; Martini, A.; Masullo, R.; Michael, T.; Migliozzi, P.; Migneco, E.; Miraglia, A.; Mollo, C.; Mongelli, M.; Morganti, M.; Mos, S.; Moudden, Y.; Musico, P.; Musumeci, M.; Nicolaou, C.; Nicolau, C. A.; Orlando, A.; Orzelli, A.; Papageorgiou, K.; Papaikonomou, A.; Papaleo, R.; Păvălaş, G. E.; Peek, H.; Pellegrino, C.; Pellegriti, M. G.; Perrina, C.; Petridou, C.; Piattelli, P.; Pikounis, K.; Popa, V.; Pradier, Th.; Priede, M.; Pühlhofer, G.; Pulvirenti, S.; Racca, C.; Raffaelli, F.; Randazzo, N.; Rapidis, P. A.; Razis, P.; Real, D.; Resvanis, L.; Reubelt, J.; Riccobene, G.; Rovelli, A.; Royon, J.; Saldaña, M.; Samtleben, D. F. E.; Sanguineti, M.; Santangelo, A.; Sapienza, P.; Savvidis, I.; Schmelling, J.; Schnabel, J.; Sedita, M.; Seitz, T.; Sgura, I.; Simeone, F.; Siotis, I.; Sipala, V.; Solazzo, M.; Spitaleri, A.; Spurio, M.; Stavropoulos, G.; Steijger, J.; Stolarczyk, T.; Stransky, D.; Taiuti, M.; Terreni, G.; Tézier, D.; Théraube, S.; Thompson, L. F.; Timmer, P.; Trapierakis, H. I.; Trasatti, L.; Trovato, A.; Tselengidou, M.; Tsirigotis, A.; Tzamarias, S.; Tzamariudaki, E.; Vallage, B.; Van Elewyck, V.; Vermeulen, J.; Vernin, P.; Viola, S.; Vivolo, D.; Werneke, P.; Wiggers, L.; Wilms, J.; de Wolf, E.; van Wooning, R. H. L.; Yatkin, K.; Zachariadou, K.; Zonca, E.; Zornoza, J. D.; Zúñiga, J.; Zwart, A.

2014-09-01

The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.

Parity Violation in Deep Inelastic Scattering in Hall C at JLab

NASA Astrophysics Data System (ADS)

Dalton, Mark Macrae; Keppel, Cynthia; Paschke, Kent

2017-09-01

The measurement of parity-violation in inclusive electron deep inelastic scattering (DIS) from a proton or deuteron target can be used to study the flavor structure of the nucleon. While valence quark parton distribution functions (PDF) can be probed in high- x measurements such as with the proposed SoLID spectrometer, complementary measurements are possible at moderate x 0.1 where the sea quarks may still play a significant role. In particular, such measurements would provide a cleanly interpretable measurement of the strange quark PDF. These measurements are possible with the upgraded CEBAF accelerator at JLab and do not require significant new experimental hardware. The prospects and potential impacts of such a measurement will be presented. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under Contract DE-AC05-06OR23177 and DE-FG02-07ER41522.

Below room temperature: How the photocatalytic activity of dense and mesoporous TiO2 coatings is affected

NASA Astrophysics Data System (ADS)

Cedillo-González, Erika Iveth; Riccò, Raffaele; Costacurta, Stefano; Siligardi, Cristina; Falcaro, Paolo

2018-03-01

Different parameters such as morphology, porosity, crystalline phase or doping agents affect the self-cleaning performance of photocatalytic TiO2-based coatings. However, also environmental conditions have been found to play a major role on the photocatalytic self-cleaning property. Substrate temperature is a significant environmental variable that can drastically affect this process. This variable becomes of great importance especially for outdoor applications: many self-cleaning photocatalytic materials have been designed to be exposed to outdoor environments and consequently, can be exposed to variable temperatures depending on the season of the year and the typical weather of the geographical zone. Thus, understanding the influence of the most common outdoor temperatures on the self-cleaning performance of TiO2-based coatings is essential for the fabrication of any kind of photocatalytic self-cleaning materials (fabricated by coating technology) that is expected to be subjected to outdoor environments. In this work, the photocatalytic activity was studied by Fourier Transformed Infrared (FTIR) Spectroscopy varying the temperature in the 0 to 30 °C range for dense and mesoporous TiO2 coatings. The temperature conditions at which these coatings present better performances were identified, providing a deeper insight for the practical application of TiO2-based self-cleaning coatings.

Green Remediation Best Management Practices: Bioremediation

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency (EPA) Principles for Greener Cleanups outlines the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site.

A new approach involving a multi transducer ultrasonic system for cleaning turbine engines' oil filters under practical conditions.

PubMed

Nguyen, Dinh Duc; Ngo, Huu Hao; Yoon, Yong Soo; Chang, Soon Woong; Bui, Hong Ha

2016-09-01

The purpose of this paper is to provide a green technology that can clean turbine engine oil filters effectively in ships using ultrasound, with ultrasonic devices having a frequency of 25kHz and different powers of 300W and 600W, respectively. The effects of temperature, ultrasonic cleaning times, pressure losses through the oil filter, solvent washing, and ultrasonic power devices were investigated. In addition, the cleaning efficiency of three modes (hand washing, preliminary washing and ultrasonic washing) were compared to assess their relative effectiveness. Experimental results revealed that the necessary ultrasonic time varied significantly depending on which solvent was used for washing. For instance, the optimum ultrasonic cleaning time was 50-60min when the oil filter was cleaned in a solvent of kerosene oil (KO) and over 80min when in a solvent of diesel oil (DO) using the same ultrasonic generator device (25kHz, 600W) and experimental conditions. Furthermore, microscopic examination did not reveal any damage or breakdown on or within the structure of the filter after ultrasonic cleaning, even in the filter's surfaces at a constantly low frequency of 25kHz and power specific capacity (100W/gal). Overall, it may be concluded that ultrasound-assisted oil filter washing is effective, requiring a significantly shorter time than manual washing. This ultrasonic method also shows promise as a green technology for washing oil filters in turbine engines in general and Vietnamese navy ships in particular, because of its high cleaning efficiency, operational simplicity and savings. Copyright © 2016 Elsevier B.V. All rights reserved.

Tandem-ESQ for Accelerator-Based Boron Neutron Capture Therapy (AB-BNCT)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kreiner, A. J.; Escuela de Ciencia y Tecnologia, Universidad de Gral San Martin; CONICET,

2007-02-12

A folded tandem, with 1.25 MV terminal voltage, combined with an ElectroStatic Quadrupole (ESQ) chain is being proposed as a machine for Accelerator-Based Boron Neutron Capture Therapy (AB-BNCT). The machine is shown to be capable of accelerating a 30 mA proton beam to 2.5 MeV. These are the specifications needed to produce sufficiently intense and clean epithermal neutron beams, based on the on the 7Li(p,n)7Be reaction, to perform BNCT treatment for deep seated tumors in less than an hour.

Waste-minimization opportunity assessment: Naval Undersea Warfare Engineering Station, Keyport, Washington. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The report describes the application of EPA's waste minimization assessment procedures to a torpedo maintenance facility at the Naval Undersea Warfare Engineering Station, Keyport, WA. The assessment focused on the Mark 48 shop and the Mark 46 shop. These shops service the Mark 48 torpedo and the Mark 46 torpedo respectively. The five waste minimization options presented are volume reduction of contaminated clothing, automated cleaning of parts, automated fuel tank draining, modification of the deep sink draining schedule and recycling of mineral spirits.

40 CFR 257.3-7 - Air.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Air. 257.3-7 Section 257.3-7... and Practices § 257.3-7 Air. (a) The facility or practice shall not engage in open burning of... 110 of the Clean Air Act, as amended. (c) As used in this section “open burning” means the combustion...

40 CFR 257.3-7 - Air.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Air. 257.3-7 Section 257.3-7... and Practices § 257.3-7 Air. (a) The facility or practice shall not engage in open burning of... 110 of the Clean Air Act, as amended. (c) As used in this section “open burning” means the combustion...

40 CFR 257.3-7 - Air.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Air. 257.3-7 Section 257.3-7 Protection... and Practices § 257.3-7 Air. (a) The facility or practice shall not engage in open burning of... 110 of the Clean Air Act, as amended. (c) As used in this section “open burning” means the combustion...

Learning as a Path, Not a Goal: Contemplative Pedagogy--Its Principles and Practices

ERIC Educational Resources Information Center

Grace, Fran

2011-01-01

What is contemplative pedagogy and how is it practiced in Religious Studies classrooms? Contemplative pedagogy cultivates inner awareness through first-person investigations, often called "contemplative practices." Contemplative teaching practices range widely: silent sitting meditation, compassion practices, walking meditation, deep listening,…

Informal science education: lifelong, life-wide, life-deep.

PubMed

Sacco, Kalie; Falk, John H; Bell, James

2014-11-01

Informal Science Education: Lifelong, Life-Wide, Life-Deep Informal science education cultivates diverse opportunities for lifelong learning outside of formal K-16 classroom settings, from museums to online media, often with the help of practicing scientists.

NREL Spectrum of Clean Energy Innovation (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2011-09-01

This brochure describes the NREL Spectrum of Clean Energy Innovation, which includes analysis and decision support, fundamental science, market relevant research, systems integration, testing and validation, commercialization and deployment. Through deep technical expertise and an unmatched breadth of capabilities, the National Renewable Energy Laboratory (NREL) leads an integrated approach across the spectrum of renewable energy innovation. From scientific discovery to accelerating market deployment, NREL works in partnership with private industry to drive the transformation of our nation's energy systems. NREL integrates the entire spectrum of innovation, including fundamental science, market relevant research, systems integration, testing and validation, commercialization, and deployment.more » Our world-class analysis and decision support informs every point on the spectrum. The innovation process at NREL is inter-dependent and iterative. Many scientific breakthroughs begin in our own laboratories, but new ideas and technologies may come to NREL at any point along the innovation spectrum to be validated and refined for commercial use.« less

Effects of Ultra-Clean and centrifugal filtration on rolling-element bearing life

NASA Technical Reports Server (NTRS)

Loewenthal, S. H.; Moyer, D. W.; Needelman, W. M.

1981-01-01

Fatigue tests were conducted on groups of 65-millimeter bore diameter deep-groove ball bearings in a MIL-L-23699 lubricant under two levels of filtration. In one test series, the oil cleanliness was maintained at an exceptionally high level (better than a class "000" per NAS 1638) with a 3 micron absolute barrier filter. These tests were intended to determine the "upper limit" in bearing life under the strictest possible lubricant cleanliness conditions. In the tests using a centrifugal oil filter, contaminants of the type found in aircraft engine filters were injected into the filters' supply line at 125 milligrams per bearing-hour. "Ultra-clean" lubrication produced bearing fatigue lives that were approximately twice that obtained in previous tests with contaminated oil using 3 micron absolute filtration and approximately three times that obtained with 49 micron filtration. It was also observed that the centrifugal oil filter had approximately the same effectiveness as a 30 micron absolute filter in preventing bearing surface damage.

Corrosion behaviour of laser-cleaned AA7024 aluminium alloy

NASA Astrophysics Data System (ADS)

Zhang, F. D.; Liu, H.; Suebka, C.; Liu, Y. X.; Liu, Z.; Guo, W.; Cheng, Y. M.; Zhang, S. L.; Li, L.

2018-03-01

Laser cleaning has been considered as a promising technique for the preparation of aluminium alloy surfaces prior to joining and welding and has been practically used in the automotive industry. The process is based on laser ablation to remove surface contaminations and aluminium oxides. However the change of surface chemistry and oxide status may affect corrosion behaviour of aluminium alloys. Until now, no work has been reported on the corrosion characteristics of laser cleaned metallic surfaces. In this study, we investigated the corrosion behaviour of laser-cleaned AA7024-T4 aluminium alloy using potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS) and scanning vibrating electrode technique (SVET). The results showed that the laser-cleaned surface exhibited higher corrosion resistance in 3.5 wt.% NaCl solution than as-received hot-rolled alloy, with significant increase in impedance and decrease in capacitance, while SVET revealed that the active anodic points appeared on the as-received surface were not presented on the laser-cleaned surfaces. Such corrosion behaviours were correlated to the change of surface oxide status measured by glow discharge optical emission spectrometry (GDOES) and X-ray photoelectron spectroscopy (XPS). It was suggested that the removal of the original less protective oxide layer consisting of MgO and MgAl2O4 on the as-received surfaces and the newly formed more protective oxide layer containing mainly Al2O3 and MgO by laser cleaning were responsible for the improvement of the corrosion performance.

77 FR 52060 - Notice of Lodging of Consent Decree Pursuant to the Clean Water Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... through best management practices, (c) capacity, management, operation and maintenance corrective action, (d) construction site inspection and enforcement, and (e) industrial facility stormwater pollution...

Clean catch urine sample

MedlinePlus

... JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 99. Nicolle LE, Norrby SR. Approach to the patient with urinary ...

Green Remediation Best Management Practices: Site Investigation

EPA Pesticide Factsheets

The U.S. EPA Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site and conducting site investigation.

40 CFR 35.937-7 - Profit.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-7 Profit. The objective of negotiations shall be the exercise of sound business judgment and good administrative practice including the...

40 CFR 35.937-7 - Profit.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-7 Profit. The objective of negotiations shall be the exercise of sound business judgment and good administrative practice including the...

40 CFR 35.937-7 - Profit.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-7 Profit. The objective of negotiations shall be the exercise of sound business judgment and good administrative practice including the...

40 CFR 35.937-7 - Profit.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-7 Profit. The objective of negotiations shall be the exercise of sound business judgment and good administrative practice including the...

Obsessive-Compulsive Disorder (For Parents)

MedlinePlus

... a bad thing, or sinned something is clean, dirty, or germy something is straight, even, or placed ... and it's important to go to them all. Practice the things the therapist recommends. Encourage your child. ...

Effects of Straw Return in Deep Soils with Urea Addition on the Soil Organic Carbon Fractions in a Semi-Arid Temperate Cornfield

PubMed Central

Li, Jiaqi; Lu, Jia; Fan, Qingfeng; Yu, Na; Zhang, Yuling; Dang, Xiuli; Zhang, Yulong

2016-01-01

Returning straw to deep soil layers by using a deep-ditching-ridge-ploughing method is an innovative management practice that improves soil quality by increasing the soil organic carbon (SOC) content. However, the optimum quantity of straw return has not been determined. To solve this practical production problem, the following treatments with different amounts of corn straw were investigated: no straw return, CK; 400 kg ha-1 straw, S400; 800 kg ha-1 straw, S800; 1200 kg ha-1 straw, S1200; and 1600 kg ha-1 straw, S1600. After straw was returned to the soil for two years, the microbial biomass C (MBC), easily oxidized organic C (EOC), dissolved organic C (DOC) and light fraction organic C (LFOC) content were measured at three soil depths (0–10, 10–20, and 20–40 cm). The results showed that the combined application of 800 kg ha-1 straw significantly increased the EOC, MBC, and LFOC contents and was a suitable agricultural practice for this region. Moreover, our results demonstrated that returning straw to deep soil layers was effective for increasing the SOC content. PMID:27123594

Effects of Straw Return in Deep Soils with Urea Addition on the Soil Organic Carbon Fractions in a Semi-Arid Temperate Cornfield.

PubMed

Zou, Hongtao; Ye, Xuhong; Li, Jiaqi; Lu, Jia; Fan, Qingfeng; Yu, Na; Zhang, Yuling; Dang, Xiuli; Zhang, Yulong

2016-01-01

Returning straw to deep soil layers by using a deep-ditching-ridge-ploughing method is an innovative management practice that improves soil quality by increasing the soil organic carbon (SOC) content. However, the optimum quantity of straw return has not been determined. To solve this practical production problem, the following treatments with different amounts of corn straw were investigated: no straw return, CK; 400 kg ha-1 straw, S400; 800 kg ha-1 straw, S800; 1200 kg ha-1 straw, S1200; and 1600 kg ha-1 straw, S1600. After straw was returned to the soil for two years, the microbial biomass C (MBC), easily oxidized organic C (EOC), dissolved organic C (DOC) and light fraction organic C (LFOC) content were measured at three soil depths (0-10, 10-20, and 20-40 cm). The results showed that the combined application of 800 kg ha-1 straw significantly increased the EOC, MBC, and LFOC contents and was a suitable agricultural practice for this region. Moreover, our results demonstrated that returning straw to deep soil layers was effective for increasing the SOC content.

Environmental projects. Volume 13: Underground storage tanks, removal and replacement. Goldstone Deep Space Communications Complex

NASA Technical Reports Server (NTRS)

Bengelsdorf, Irv

1991-01-01

The Goldstone Deep Space Communications Complex (GDSCC), located in the Mojave Desert about 40 miles north of Barstow, California, and about 160 miles northeast of Pasadena, is part of the National Aeronautics and Space Administration's (NASA's) Deep Space Network, one of the world's largest and most sensitive scientific telecommunications and radio navigation networks. Activities at the GDSCC are carried out in support of six large parabolic dish antennas. As a large-scale facility located in a remote, isolated desert region, the GDSCC operations require numerous on-site storage facilities for gasoline, diesel oil, hydraulic oil, and waste oil. These fluids are stored in underground storage tanks (USTs). This present volume describes what happened to the 26 USTs that remained at the GDSCC. Twenty-four of these USTs were constructed of carbon steel without any coating for corrosion protection, and without secondary containment or leak detection. Two remaining USTs were constructed of fiberglass-coated carbon steel but without secondary containment or leak protection. Of the 26 USTs that remained at the GDSCC, 23 were cleaned, removed from the ground, cut up, and hauled away from the GDSCC for environmentally acceptable disposal. Three USTs were permanently closed (abandoned in place).

Green Remediation Best Management Practices: Landfill Cover Systems & Energy Production

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency (EPA) Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site.

A Blueprint for IAQ.

ERIC Educational Resources Information Center

Quraishi, Arif; Kapfer, Tom

1999-01-01

Presents practical solutions to school indoor-air-quality problems. Areas where school administrators should set IAQ goals and provide resources are listed, and tips for HVAC maintenance and cleaning to reduce air pollutants are provided. (GR)

7 CFR 51.2956 - Practically clean.

Code of Federal Regulations, 2010 CFR

2010-01-01

... dirt or other foreign matter, and that individual walnuts are not damaged by such means. A slightly chalky deposit on the shell is characteristic of many bleached nuts and shall not be considered as dirt...

7 CFR 51.2339 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... means the fruit is practically free from dirt, dust, or other foreign material. Fairly clean means the fruit is reasonably free from dirt, dust, or other foreign material. Well formed means the fruit has the...

Cleaning and disinfecting environmental surfaces in health care: Toward an integrated framework for infection and occupational illness prevention.

PubMed

Quinn, Margaret M; Henneberger, Paul K; Braun, Barbara; Delclos, George L; Fagan, Kathleen; Huang, Vanthida; Knaack, Jennifer L S; Kusek, Linda; Lee, Soo-Jeong; Le Moual, Nicole; Maher, Kathryn A E; McCrone, Susan H; Mitchell, Amber Hogan; Pechter, Elise; Rosenman, Kenneth; Sehulster, Lynne; Stephens, Alicia C; Wilburn, Susan; Zock, Jan-Paul

2015-05-01

The Cleaning and Disinfecting in Healthcare Working Group of the National Institute for Occupational Safety and Health, National Occupational Research Agenda, is a collaboration of infection prevention and occupational health researchers and practitioners with the objective of providing a more integrated approach to effective environmental surface cleaning and disinfection (C&D) while protecting the respiratory health of health care personnel. The Working Group, comprised of >40 members from 4 countries, reviewed current knowledge and identified knowledge gaps and future needs for research and practice. An integrated framework was developed to guide more comprehensive efforts to minimize harmful C&D exposures without reducing the effectiveness of infection prevention. Gaps in basic knowledge and practice that are barriers to an integrated approach were grouped in 2 broad areas related to the need for improved understanding of the (1) effectiveness of environmental surface C&D to reduce the incidence of infectious diseases and colonization in health care workers and patients and (2) adverse health impacts of C&D on health care workers and patients. Specific needs identified within each area relate to basic knowledge, improved selection and use of products and practices, effective hazard communication and training, and safer alternatives. A more integrated approach can support multidisciplinary teams with the capacity to maximize effective and safe C&D in health care. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

Effect of commercial hauling practices and tanker cleaning treatments on raw milk microbiological quality.

PubMed

Darchuk, Emily M; Waite-Cusic, Joy; Meunier-Goddik, Lisbeth

2015-10-01

Consolidation of the US milk industry has led to use of tankers for up to 24 h in between thorough cleanings. As the heavy use of tankers has not been previously studied, the effect of this form of hauling on raw milk quality is unknown. This study focused on the effect of frequent tanker use during hauling on raw milk quality at a commercial facility. Standard tanker use (cleaned-in-place once per 24 h) served as our control and incremental cleaning treatments (water rinse after each load, water rinse after each load with a sanitizer treatment after 12 h, and 12 h of sanitizer treatment) were added to the study to understand if any effect could be mitigated by more frequent cleaning. Producer samples were collected from the farm before loading milk into the tanker as well as sampling the same milk directly out of the tanker truck before unloading at the manufacturer. The study was repeated at 2 different dairy manufacturing facilities, once during the summer and once during the winter. Milk quality was quantified through industry-relevant microbiological tests: individual bacteria count, thermophilic spore count, and preliminary incubation count. Within the study we defined a negative effect on milk quality as a statistically significant difference between the tanker and producer samples in any of the 3 microbial tests conducted between treatments. Results from the study showed no clear effect due to hauling in individual bacteria count, thermophilic spore count, or preliminary incubation counts. There was also no difference in milk quality between the 2 plants, suggesting that neither season nor location affected our results in the standard use variable. As we did not see a negative effect on milk quality in the standard use variable, the addition of cleaning treatments did not appear to provide any clear benefit. Tanker surface swabs and ATP swabs were also used to monitor tanker sanitation and the efficacy of cleaning treatments. Both surface and ATP swabs revealed differences between cleaning efficacy at the 2 facilities. Although the differences in efficacy did not influence tanker milk quality within our study, variability in sanitation may provide a source of contamination that could negatively affect raw milk quality in other areas. Based on this study, current hauling practices appear to be effective in mitigating any measurable effect on raw milk quality; however, further investigation is needed before making industry-wide recommendations. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Connecting Reflective Practice, Dialogic Protocols, and Professional Learning

ERIC Educational Resources Information Center

Nehring, James; Laboy, Wilfredo T.; Catarius, Lynn

2010-01-01

In recent years, elements of reflective practice have been popularized in state school professional development. As reflective practice has moved into the mainstream, dialogic protocols have been developed by numerous organizations to structure discourse for deep understanding, enhance professional practice and advance organizational learning.…

Oral Hygiene Practices and Teeth Cleaning Techniques Among Medical Students

PubMed Central

Fatima, Syeda H; Ghazanfar, Haider; Haq, Sana; Khan, Najeeb A; Mehmood, Moeez; Ghazanfar, Ali

2017-01-01

Objectives Oral health is essential for general health and quality of life. It is a state of being free from mouth and facial pain, oral and throat cancer, oral infections and sores, periodontal disease, tooth decay, tooth loss, and other diseases and disorders that limit an individual’s capacity to bite, chew, smile, and speak; it affects psychosocial well-being too. The objective of our study was to assess teeth cleaning techniques and oral hygiene practices among medical students. Methods The data of the study were collected in two stages. The first stage involved the administration of a self-constructed questionnaire among medical students. In the second step, the students were asked to demonstrate their teeth cleaning techniques on a model. A standard teeth cleaning checklist was used to evaluate the students. The students were then given the checklist and a video on teeth cleaning techniques was shown to them. The data obtained was analyzed on IBM's statistical package for the social sciences (SPSS) version 21.  Results Out of a total of 444 students, 256 (57.7 percent) were males while 188 (42.3 percent) were females. About 254 (57.2 percent) participants were preclinical medical students while 190 (42.8 percent) were clinical year medical students. A majority of medical students used medium consistency toothbrushes (177; 39.9 percent) and soft consistency toothbrushes (137; 30.9 percent). Most medical students (248; 55.9 percent) brushed two times a day while 163 (36.7 percent) brushed only one time. About 212 (47.7 percent) of the medical students used mouthwash along with a toothbrush while only 36 (8.1 percent) used floss along with a toothbrush. About 157 participants (35.4 percent) changed their toothbrush once in two months while 132 (26.7 percent) changed their toothbrush once in three months. The mean duration that participants brushed their teeth was 134.99 ± 69.01 seconds. Conclusion Medical students were found to have a faulty teeth cleaning technique. There is a dire need to spread awareness about correct teeth cleaning techniques because poor oral hygiene can have a detrimental effect on the overall health and quality of life of an individual. PMID:28944126

Plastics processing: statistics, current practices, and evaluation.

PubMed

Cooke, F

1993-11-01

The health care industry uses a huge quantity of plastic materials each year. Much of the machinery currently used, or supplied, for plastics processing is unsuitable for use in a clean environment. In this article, the author outlines the reasons for the current situation and urges companies to re-examine their plastic-processing methods, whether performed in-house or subcontracted out. Some of the factors that should be considered when evaluating plastics-processing equipment are outlined to assist companies in remaining competitive and complying with impending EC regulations on clean room standards for manufacturing areas.

Innovative method and apparatus for the deep cleaning of soluble salts from mortars and lithic materials

NASA Astrophysics Data System (ADS)

Gaggero, Laura; Ferretti, Maurizio; Torrielli, Giulia; Caratto, Valentina

2016-04-01

Porous materials (e.g. plasters, mortars, concrete, and the like) used in the building industry or in artworks fail to develop, after their genesis, salts such as nitrates, carbonates (e.g. potassium carbonate, magnesium carbonate, calcium carbonate), chlorides (e.g. sodium chloride) and/or others, which are a concurrent cause of material deterioration phenomena. In the case of ancient or cultural heritage buildings, severe damage to structures and works of art, such as fresco paintings are possible. In general, in situ alteration pattern in mortars and frescoes by crystallization of soluble salts from solutions is caused by capillar rise or circulation in damp walls. Older buildings can be more subject to capillary rise of ion-rich waters, which, as water evaporates, create salt crystals inside the walls. If this pattern reveals overwhelming upon other environmental decay factors, the extraction of salts is the first restoration to recover the artpiece after the preliminary assessment and mitigation of the causes of soaking. A new method and apparatus, patented by University of Genoa [1] improves the quality and durability of decontamination by soluble salts, compared with conventional application of sepiolite or cellulose wraps. The conventional application of cellulose or sepiolite requires casting a more or less thick layer of wrap on the mortar, soaking with distilled water, and waiting until dry. The soluble salts result trapped within the wrap. A set of artificial samples reproducing the stratigraphy of frescoes was contaminated with saline solution of known concentration. The higher quality of the extraction was demonstrated by trapping the salts within layers of Japanese paper juxtaposed to the mortar; the extraction with the dedicated apparatus was operated in a significantly shorter time than with wraps (some hours vs. several days). Two cycles of about 15 minutes are effective in the deep cleaning from contaminant salts. The decontamination was demonstrated by conducibility tests on the juxtaposed Japanese paper. In addition, after the conventional treatment, a considerable amount of soluble salts was further extracted demonstrating that traditional wraps operate just a shallow cleaning, and soluble salts are liable to emerge later as efflorescence affecting the conservation after restoration. The optimum cleaning was obtained by finishing the innovative extraction with sepiolite/cellulose wraps. As a whole, the novel method and apparatus enhance the time for restoration and the final quality before consolidation and protection. [1] "Apparatus and method for treating porous materials" - M. Ferretti, L. Gaggero, G. Torrielli, PCT/IB2015/055129 (2015)

Beyond hand hygiene: a qualitative study of the everyday work of preventing cross-contamination on hospital wards.

PubMed

Hor, Su-Yin; Hooker, Claire; Iedema, Rick; Wyer, Mary; Gilbert, Gwendolyn L; Jorm, Christine; O'Sullivan, Matthew Vincent Neil

2017-07-01

Hospital-acquired infections are the most common adverse event for inpatients worldwide. Efforts to prevent microbial cross-contamination currently focus on hand hygiene and use of personal protective equipment (PPE), with variable success. Better understanding is needed of infection prevention and control (IPC) in routine clinical practice. We report on an interventionist video-reflexive ethnography study that explored how healthcare workers performed IPC in three wards in two hospitals in New South Wales, Australia: an intensive care unit and two general surgical wards. We conducted 46 semistructured interviews, 24 weeks of fieldwork (observation and videoing) and 22 reflexive sessions with a total of 177 participants (medical, nursing, allied health, clerical and cleaning staff, and medical and nursing students). We performed a postintervention analysis, using a modified grounded theory approach, to account for the range of IPC practices identified by participants. We found that healthcare workers' routine IPC work goes beyond hand hygiene and PPE. It also involves, for instance, the distribution of team members during rounds, the choreography of performing aseptic procedures and moving 'from clean to dirty' when examining patients. We account for these practices as the logistical work of moving bodies and objects across boundaries, especially from contaminated to clean/vulnerable spaces, while restricting the movement of micro-organisms through cleaning, applying barriers and buffers, and trajectory planning. Attention to the logistics of moving people and objects around healthcare spaces, especially into vulnerable areas, allows for a more comprehensive approach to IPC through better contextualisation of hand hygiene and PPE protocols, better identification of transmission risks, and the design and promotion of a wider range of preventive strategies and solutions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Street dust: implications for stormwater and air quality, and environmental through street sweeping.

PubMed

Calvillo, Steven J; Williams, E Spencer; Brooks, Bryan W

2015-01-01

Street dust represents a source of dual potential risk to stormwater and air quality. It has been well documented that street dust washes into local watersheds and can degrade water quality. Research has also demonstrated that ambient particulate matter (PM10) , which is associated with adverse health outcomes, can arise from resuspension of accumulated street dust. Furthermore, many contaminants, including metals, are present at higher concentrations in the smallest available particles, which are more likely to be resuspended in air and stormwater runoff. Although street cleaning is listed as a best management practice for storm water quality by the EPA, data are limited on the critical parameters (technology, environment, usage), which determine the effectiveness of any street cleaning program, particularly in the peer-reviewed literature. The purpose of the present study was to develop a comprehensive understanding of the efficacy of various street cleaning technologies and practices to protect both water quality and public health. Few studies have compared the effectiveness of street sweeping technologies to remove street dust. Unfortunately, the dearth of comprehensive data on exposure, contaminant concentrations, and efficacy of various sweeping technologies and strategies precludes developing quantitative estimates for potential risk to humans and the environment. Based on the few studies available, regenerative air street sweepers appear to provide the most benefit with regard to collection of small particles and prevention of re-entrainment. It is also clear from the available data that local conditions, climate, and specific needs are critical determinants of the ideal street sweeping strategy (technology, frequency, speed, targeted areas, etc.). Given the critical need for protection of water and air quality in rapidly expanding urban regions (e.g., megacities), further research is necessary to develop best practices for street dust management. Herein, we provide a framework for future experimental studies to support risk-based assessments of street cleaning technologies.

Extreme Longevity in Proteinaceous Deep-Sea Corals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roark, E B; Guilderson, T P; Dunbar, R B

2009-02-09

Deep-sea corals are found on hard substrates on seamounts and continental margins world-wide at depths of 300 to {approx}3000 meters. Deep-sea coral communities are hotspots of deep ocean biomass and biodiversity, providing critical habitat for fish and invertebrates. Newly applied radiocarbon age date from the deep water proteinaceous corals Gerardia sp. and Leiopathes glaberrima show that radial growth rates are as low as 4 to 35 {micro}m yr{sup -1} and that individual colony longevities are on the order of thousands of years. The management and conservation of deep sea coral communities is challenged by their commercial harvest for the jewelrymore » trade and damage caused by deep water fishing practices. In light of their unusual longevity, a better understanding of deep sea coral ecology and their interrelationships with associated benthic communities is needed to inform coherent international conservation strategies for these important deep-sea ecosystems.« less

High-Quality Traineeships: Identifying What Works. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Smith, Erica; Comyn, Paul; Kemmis, Roslin Brennan; Smith, Andy

2009-01-01

This study explores the common features of high-quality traineeships using case studies from the cleaning, child care, construction, retail, finance and insurance, and meat processing areas. The research identifies a range of policy measures that could improve both the practice and image of traineeships. A good practice guide has also been…

Gasoline risk management: a compendium of regulations, standards, and industry practices.

PubMed

Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

2014-11-01

This paper is part of a special series of publications regarding gasoline toxicology testing and gasoline risk management; this article covers regulations, standards, and industry practices concerning gasoline risk management. Gasoline is one of the highest volume liquid fuel products produced globally. In the U.S., gasoline production in 2013 was the highest on record (API, 2013). Regulations such as those pursuant to the Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) and many others provide the U.S. federal government with extensive authority to regulate gasoline composition, manufacture, storage, transportation and distribution practices, worker and consumer exposure, product labeling, and emissions from engines and other sources designed to operate on this fuel. The entire gasoline lifecycle-from manufacture, through distribution, to end-use-is subject to detailed, complex, and overlapping regulatory schemes intended to protect human health, welfare, and the environment. In addition to these legal requirements, industry has implemented a broad array of voluntary standards and best management practices to ensure that risks from gasoline manufacturing, distribution, and use are minimized. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Trial of a novel plasma gas disinfection system (Radica) to reduce mattress residual bacterial contamination in the acute hospital setting: a preliminary study.

PubMed

Shiely, F; Fallon, D; Casey, C; Kerins, D M; Eustace, J A

2017-02-01

In routine clinical practice, mattresses are manually cleaned using specialised cleaning and high-level disinfecting fluids. While effective against a wide range of organisms, the success of this approach is dependent on a thorough and complete application and is likely to be susceptible to human error and thus variable. The efficacy of available infection control measures to reduce such mattress contamination is unknown as it is not subject to quality control measures. There is a pressing need to identify more effective methods to prevent cross contamination within the medical environment, given the lack of available treatment strategies. The purpose of this study is to investigate the ability of a new technology, gaseous technology, to reduce colonization levels, compared to standard cleaning, and so attenuate superficial nosocomial infections. We conducted a prospective, single-centre, open-label, non-randomized trial with blinded outcome assessments, comparing the standard cleaning of hospital mattresses with a novel plasma based disinfection system Radica™, followed by a standard post-cleaning culturing protocol (five swabs/mattress). The median (interquartile range) maximal colony count per mattress for the 20 Radica versus 7 routinely cleaned mattresses was 1 (1-2.7) versus Too-Numerous-to-Count (TNTC) (32-TNTC), respectively, p = 0.002. Of the 20 Radica™ treated mattresses, 12 (60 %) had no positive culture result while all of the standard cleaned mattresses had at least two positive cultures. The plasma based Radica disinfection system reduces mattress bacterial colonization levels as compared to routine cleaning. This is a potentially important technology in the health care system to reduce surface colonisation and hence nosocomial infections.

The Role of a Neuropsychologist on a Movement Disorders Deep Brain Stimulation Team.

PubMed

Kubu, Cynthia S

2018-05-01

The term movement disorders is misleading in the implication that the symptoms are limited to motor problems. Most movement disorders include a variety of neurobehavioral and neurocognitive symptoms that require neuropsychological expertise. The goal of this paper is to provide a rationale and practical roadmap for neuropsychologists' involvement in a Movement Disorders team with a specific focus on pre-operative deep brain stimulation (DBS) evaluations. Pragmatic recommendations regarding requisite skills, clinical practice, recommendations, communication, and benefits are outlined.

Enhanced Sanitation Standard Operating Procedures Have Limited Impact on Listeria monocytogenes Prevalence in Retail Delis.

PubMed

Etter, Andrea J; Hammons, Susan R; Roof, Sherry; Simmons, Courtenay; Wu, Tongyu; Cook, Peter W; Katubig, Alex; Stasiewicz, Matthew J; Wright, Emily; Warchocki, Steven; Hollingworth, Jill; Thesmar, Hilary S; Ibrahim, Salam A; Wiedmann, Martin; Oliver, Haley F

2017-10-20

In a recent longitudinal surveillance study in 30 U.S. retail delicatessens, 9.7% of environmental surfaces were positive for Listeria monocytogenes, and we found substantial evidence of persistence. In this study, we aimed to reduce the prevalence and persistence of L. monocytogenes in the retail deli environment by developing and implementing practical and feasible intervention strategies (i.e., sanitation standard operating procedures; SSOPs). These SSOPs were standardized across the 30 delis enrolled in this study. SSOP implementation was verified by systems inherent to each retailer. Each deli also was equipped with ATP monitoring systems to verify effective sanitation. We evaluated intervention strategy efficacy by testing 28 food and nonfood contact surfaces for L. monocytogenes for 6 months in all 30 retail delis. The efficacy of the intervention on the delis compared with preintervention prevalence level was not statistically significant; we found that L. monocytogenes could persist despite implementation of enhanced SSOPs. Systematic and accurate use of ATP monitoring systems varied widely among delis. The findings indicate that intervention strategies in the form of enhanced daily SSOPs were not sufficient to eliminate L. monocytogenes from highly prevalent and persistently contaminated delis and that more aggressive strategies (e.g., deep cleaning or capital investment in redesign or equipment) may be necessary to fully mitigate persistent contamination.

Design Considerations for Clean QED Fusion Propulsion Systems

NASA Astrophysics Data System (ADS)

Bussard, Robert W.; Jameson, Lorin W.

1994-07-01

The direct production of electric power appears possible from fusion reactions between fuels whose products consist solely of charged particles and thus do not present radiation hazards from energetic neutron production, as do reactions involving deuteron-bearing fuels. Among these are the fuels p, 11B, 3He, and 6Li. All of these can be ``burned'' in inertial-electrostatic-fusion (IEF) devices to power QED fusion-electric rocket engines. These IEF sources provide direct-converted electrical power at high voltage (MeV) to drive e-beams for efficient propellant heating to extreme temperatures, with resulting high specific impulse performance capabilities. IEF/QED engine systems using p11B can outperform all other advanced concepts for controlled fusion propulsion by 2-3 orders of magnitude, while 6Li6Li fusion yields one order of magnitude less advance. Either of these fusion rocket propulsion systems can provide very rapid transit for solar system missions, with high payload fractions in single-stage vehicles. The 3He3He reaction can not be used practically for direct electric conversion because of the wide spread in energy of its fusion products. However, it may eventually prove useful for thermal/electrical power generation in central station power plants, or for direct-fusion-product (DFP) propellant heatingin advanced deep-space rocket engines.

Green Remediation Best Management Practices: Integrating Renewable Energy into Site Cleanup

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency (EPA) Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site.

Green Remediation Best Management Practices: Pump and Treat Technologies

EPA Pesticide Factsheets

The U.S. EPA Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site with pump and treat technologies.

Green Remediation Best Management Practices: Sites with Leaking Underground Storage Tank Systems

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency (EPA) Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site.

49 CFR 176.805 - On deck stowage.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for leakage from any package to drain away from other cargo into an overboard scupper or freeing port... stowage is not practical, sufficient clean dry sand must be placed under and around the lower tier of...

The Integration of the 241-Z Building Decontamination and Decommissioning Under Cercla with RCRA Closure at the Plutonium Finishing Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mattlin, E.; Charboneau, S.; Johnston, G.

2007-07-01

The 241-Z treatment and storage tanks, a hazardous waste Treatment, Storage and Disposal (TSD) unit permitted pursuant to the Resource Conservation and Recovery Act of 1976 (RCRA) and Washington State Hazardous Waste Management Act, RCW 70.105, , have been deactivated and are being actively decommissioned under the provisions of the Hanford Federal Facility Agreement and Consent Order (HFFACO), RCRA and Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) 42 U.S.C. 9601 et seq. The 241-Z TSD unit managed non-listed radioactive contaminated waste water, containing trace RCRA characteristic constituents. The 241-Z TSD unit consists of below grade tanks (D-4,more » D-5, D-7, D-8, and an overflow tank) located in a concrete containment vault, sample glovebox GB-2-241-ZA, and associated ancillary piping and equipment. The tank system is located beneath the 241-Z building. The 241-Z building is not a portion of the TSD unit. The sample glovebox is housed in the above-grade building. Waste managed at the TSD unit was received via underground piping from Plutonium Finishing Plant (PFP) sources. Tank D-6, located in the D-6 vault cell, is a past-practice tank that was taken out of service in 1972 and has never operated as a portion of the RCRA TSD unit. CERCLA actions will address Tank D-6, its containment vault cell, and soil beneath the cell that was potentially contaminated during past-practice operations and any other potential past-practice contamination identified during 241-Z closure, while outside the scope of the Hanford Facility Dangerous Waste Closure Plan, 241-Z Treatment and Storage Tanks. Under the RCRA closure plan, the 241-Z TSD unit is anticipated to undergo clean closure to the performance standards of the State of Washington with respect to dangerous waste contamination from RCRA operations. The TSD unit will be clean closed if physical closure activities identified in the plan achieve clean closure standards for all 241-Z locations. Clean closed 241-Z treatment and storage tanks, equipment and/or structures will remain after RCRA clean closure for future disposition in conjunction with PFP decommissioning activities which are integrated with CERCLA. (authors)« less

Forced-air warming and ultra-clean ventilation do not mix: an investigation of theatre ventilation, patient warming and joint replacement infection in orthopaedics.

PubMed

McGovern, P D; Albrecht, M; Belani, K G; Nachtsheim, C; Partington, P F; Carluke, I; Reed, M R

2011-11-01

We investigated the capacity of patient warming devices to disrupt the ultra-clean airflow system. We compared the effects of two patient warming technologies, forced-air and conductive fabric, on operating theatre ventilation during simulated hip replacement and lumbar spinal procedures using a mannequin as a patient. Infection data were reviewed to determine whether joint infection rates were associated with the type of patient warming device that was used. Neutral-buoyancy detergent bubbles were released adjacent to the mannequin's head and at floor level to assess the movement of non-sterile air into the clean airflow over the surgical site. During simulated hip replacement, bubble counts over the surgical site were greater for forced-air than for conductive fabric warming when the anaesthesia/surgery drape was laid down (p = 0.010) and at half-height (p < 0.001). For lumbar surgery, forced-air warming generated convection currents that mobilised floor air into the surgical site area. Conductive fabric warming had no such effect. A significant increase in deep joint infection, as demonstrated by an elevated infection odds ratio (3.8, p = 0.024), was identified during a period when forced-air warming was used compared to a period when conductive fabric warming was used. Air-free warming is, therefore, recommended over forced-air warming for orthopaedic procedures.

Electrical properties of metal/Al2O3/In0.53Ga0.47As capacitors grown on InP

NASA Astrophysics Data System (ADS)

Ferrandis, Philippe; Billaud, Mathilde; Duvernay, Julien; Martin, Mickael; Arnoult, Alexandre; Grampeix, Helen; Cassé, Mikael; Boutry, Hervé; Baron, Thierry; Vinet, Maud; Reimbold, Gilles

2018-04-01

To overcome the Fermi-level pinning in III-V metal-oxide-semiconductor capacitors, attention is usually focused on the choice of dielectric and surface chemical treatments prior to oxide deposition. In this work, we examined the influence of the III-V material surface cleaning and the semiconductor growth technique on the electrical properties of metal/Al2O3/In0.53Ga0.47As capacitors grown on InP(100) substrates. By means of the capacitance-voltage measurements, we demonstrated that samples do not have the same total oxide charge density depending on the cleaning solution used [(NH4)2S or NH4OH] prior to oxide deposition. The determination of the interface trap density revealed that a Fermi-level pinning occurs for samples grown by metalorganic chemical vapor deposition but not for similar samples grown by molecular beam epitaxy. Deep level transient spectroscopy analysis explained the Fermi-level pinning by an additional signal for samples grown by metalorganic chemical vapor deposition, attributed to the tunneling effect of carriers trapped in oxide toward interface states. This work emphasizes that the choice of appropriate oxide and cleaning treatment is not enough to prevent a Fermi-level pinning in III-V metal-oxide-semiconductor capacitors. The semiconductor growth technique needs to be taken into account because it impacts the trapping properties of the oxide.

Availability of manufacturers' information on efficacy and compatibility of detergents used for cleaning dental instruments.

PubMed

Calvert, G; Murray, C A; Smith, A J; Hurrell, D

2012-05-25

To review physico-chemical data supplied for commercially available detergents marketed for manual and/or ultrasonic cleansing of reusable dental instruments. Manufacturers/suppliers of commercially available detergents for manual or ultrasonic cleaning of dental instruments within primary dental care were invited to supply product information. A structured questionnaire requested details on a range of physical and chemical properties for each detergent. Seventeen detergent manufacturers/suppliers, encompassing 31 commercially available detergents were identified. Ten of the 17 manufacturers provided information on 23 (74%) of the detergent formulations. Nine detergents were of neutral pH, ten mild alkalis (pH 7.5-10.5) and four strong alkalis (pH >10.5). Sixteen detergents were recommended for ultrasonic and manual cleaning, four stated ultrasonic use and three manual only. Ten detergents cited enzymatic activity as their main mode of action, but only six manufacturers provided detailed information. Four detergents recommended by manufacturers as suitable for manual washing had a strong alkaline pH (>10.5), presenting chemical hazards to users. Two strong alkaline detergents did not warn users of potential adverse effects of such alkaline solutions (corrosion) upon aluminium containing instruments. Only one detergent had investigated the potential toxicity of detergent residuals remaining on instruments after reprocessing. It has proven challenging to collate physico-chemical data on detergents suitable for use in manual and/or ultrasonic cleaning of dental instruments in general dental practice. Standardisation of information on the nature and efficacy of dental detergents in a readily accessible form would be beneficial to dental practice.

Summary of: availability of manufacturers' information on efficacy and compatibility of detergents used for cleaning dental instruments.

PubMed

Barker, Chris

2012-05-25

To review physico-chemical data supplied for commercially available detergents marketed for manual and/or ultrasonic cleansing of reusable dental instruments. Manufacturers/suppliers of commercially available detergents for manual or ultrasonic cleaning of dental instruments within primary dental care were invited to supply product information. A structured questionnaire requested details on a range of physical and chemical properties for each detergent. Seventeen detergent manufacturers/suppliers, encompassing 31 commercially available detergents were identified. Ten of the 17 manufacturers provided information on 23 (74%) of the detergent formulations. Nine detergents were of neutral pH, ten mild alkalis (pH 7.5-10.5) and four strong alkalis (pH >10.5). Sixteen detergents were recommended for ultrasonic and manual cleaning, four stated ultrasonic use and three manual only. Ten detergents cited enzymatic activity as their main mode of action, but only six manufacturers provided detailed information. Four detergents recommended by manufacturers as suitable for manual washing had a strong alkaline pH (>10.5), presenting chemical hazards to users. Two strong alkaline detergents did not warn users of potential adverse effects of such alkaline solutions (corrosion) upon aluminium containing instruments. Only one detergent had investigated the potential toxicity of detergent residuals remaining on instruments after reprocessing. It has proven challenging to collate physico-chemical data on detergents suitable for use in manual and/or ultrasonic cleaning of dental instruments in general dental practice. Standardisation of information on the nature and efficacy of dental detergents in a readily accessible form would be beneficial to dental practice.

Implementation of Paste Backfill Mining Technology in Chinese Coal Mines

PubMed Central

Chang, Qingliang; Zhou, Huaqiang; Bai, Jianbiao

2014-01-01

Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application. PMID:25258737

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romm, J.J.

Many American companies have found that saving energy and cutting pollution dramatically improves the bottom line. But beyond these gains, businesses that launch energy efficiency programs to save money are often astonished to discover unforeseen benefits: energy efficient lighting, heating, cooling, motors, and industrial processes can increase worker productivity, decrease absenteeism, and improve the quality of work performed. Profits created by the jump in worker productivity can exceed energy savings by a factor of ten. Energy efficiency and pollution prevention represent the next wave in manufacturing, following the quality revolution launched by the Japanese in the 1960s. Unless America leadsmore » the lean and clean revolution, economic health will be undermined as other countries develop clean processes and products and US companies suffer competitively. Also, developing countries will leapfrog their wasteful model and buy products and manufacturing processes from foreign firms already practicing lean and clean.« less

Implementation of paste backfill mining technology in Chinese coal mines.

PubMed

Chang, Qingliang; Chen, Jianhang; Zhou, Huaqiang; Bai, Jianbiao

2014-01-01

Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application.

Investigating the failure of repeated standard cleaning and disinfection of a Pseudomonas aeruginosa-infected pancreatic and biliary endoscope.

PubMed

Qiu, Lijun; Zhou, Zhihui; Liu, Qifang; Ni, Yuhua; Zhao, Feng; Cheng, Hao

2015-08-01

Digestive endoscopy is an important technique for the diagnosis and treatment of digestive system disease. To assure medical safety, a digestive endoscope must be cleaned and disinfected before its use in an operation on the next patient. The most common treatment procedure on a digestive endoscope is high-level disinfection. The potential risk associated with digestive endoscopes is always the focus of endoscopic management in clinical practice. In this study, a polluted pancreatic and biliary endoscope after surgery was cleaned and disinfected multiple times with the standard procedure but still tested positive for Pseudomonas aeruginosa culture, which is very rare and has not been reported in China or abroad. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Clothes Cleaning Studies for Long Duration Manned Missions

NASA Technical Reports Server (NTRS)

Tamsen, Maria

2015-01-01

Imagine how much could be saved in just 5 years if the garments that are sent to space are reduced by half. My project consisted in analyzing the efficiency of steam cleaning with and without pretreatment of selected garments. Crewmembers wear clothes for a certain period of time, and then these garments are discarded. Having crewmembers wearing their clothes for longer time while giving them the opportunity of reusing the garments (which at the moment is not possible) will reduce costs considerably. More importantly, it will build the path for sustaining human presence in deep space. In addition, reusing cleaned clothes will help crewmembers be in a more hygienic environment because the amount of trash will be reduced. By limiting the amount of garments that are sent, volume and mass will be reduced. As a result, there will be more space to pack other necessary goods. The main duties within the project were to develop a pre wash procedure that will be used for all of the fabrics (4 different fabrics were included in the experiment), to establish a time for the process of cleaning the garments with steam, to know the amount of oil and salt solution necessary to soil the fabric and that will be completely absorbed by the fabric, to determine the amount of chemical agent to use for removing the stains, to create a matrix with the SAS software that will have all the possible combinations to carry out during the experiment when soiling the shirts, to measure the stains before and after the steam process, to measure the cleanliness of the fabric before and after with the use of the Gray Scale for Staining, and to find out whether or not the observations are valid and useful.

Cleaning and Disinfection of Bacillus cereus Biofilm.

PubMed

Deal, Amanda; Klein, Dan; Lopolito, Paul; Schwarz, John Spencer

2016-01-01

Methodology has been evolving for the testing of disinfectants against bacterial single-species biofilms, as the difficulty of biofilm remediation continues to gain much-needed attention. Bacterial single-species biofilm contamination presents a real risk to good manufacturing practice-regulated industries. However, mixed-species biofilms and biofilms containing bacterial spores remain an even greater challenge for cleaning and disinfection. Among spore-forming microorganisms frequently encountered in pharmaceutical manufacturing areas, the spores of Bacillus cereus are often determined to be the hardest to disinfect and eradicate. One of the reasons for the low degree of susceptibility to disinfection is the ability of these spores to be encapsulated within an exopolysachharide biofilm matrix. In this series of experiments, we evaluated the disinfectant susceptibility of B. cereus biofilms relative to disassociated B. cereus spores and biofilm from a non-spore-forming species. Further, we assessed the impact that pre-cleaning has on increasing that susceptibility. Methodology has been evolving for the testing of disinfectants against bacterial single-species biofilms, as the difficulty of biofilm remediation continues to gain much-needed attention. Bacterial single-species biofilm contamination presents a real risk to good manufacturing practice-regulated industries. However, mixed-species biofilms and biofilms containing bacterial spores remain an even greater challenge for cleaning and disinfection. Among spore-forming microorganisms frequently encountered in pharmaceutical manufacturing areas, the spores of Bacillus cereus are often determined to be the hardest to disinfect and eradicate. One of the reasons for the low degree of susceptibility to disinfection is the ability of these spores to be encapsulated within an exopolysachharide biofilm matrix. In this series of experiments, we evaluated the disinfectant susceptibility of B. cereus biofilms relative to disassociated B. cereus spores and biofilm from a non-spore-forming species. Further, we assessed the impact that pre-cleaning has on increasing that susceptibility. © PDA, Inc. 2016.

EPA Principles for Greener Cleanups

EPA Pesticide Factsheets

A goal of the U.S. Environmental Protection Agency (EPA) Office and Land and Emergency Management (OLEM) and its many partners is to preserve and restore land by promoting and using protective waste management practices and by assessing and cleaning..

Vessel-to-Reef Projects

EPA Pesticide Factsheets

Using vessels as artificial reefs is an option for disposal. Artificial reefs serve to benefit the environment. Vessel-to-reef projects can follow the best management practices guidance. Guidance are provided for how to clean up vessels for use as reefs.

A regional protocol for evaluating the effectiveness of forestry best management practices at controlling erosion and sedimentation

Treesearch

Roger Ryder; Pamela Edwards; Pamela Edwards

2006-01-01

Forestry operations do not have permitting requirements under the Clean Water Act because there is a ccsilvicultural exemption" given in that law, as long as best management practices (BMPs) are used to help control non-point source pollution. However, states' monitoring of BMP effectiveness often has been sporadic and anecdotal, and the procedures used have...

40 CFR 22.44 - Supplemental rules of practice governing the termination of permits under section 402(a) of the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Supplemental rules of practice governing the termination of permits under section 402(a) of the Clean Water Act or under section 3008(a)(3) of the Resource Conservation and Recovery Act. 22.44 Section 22.44 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL CONSOLIDATED...

Physician strives to create lean, clean health care machine. Studies of manufacturing processes may one day help make your practice more efficient.

PubMed

Hill, D

2001-01-01

Elisabeth Hager, MD, MMM, CPE, is teaming up with scientists and industrialists to teach physicians how to apply principles of lean, total-quality manufacturing to their practices. She believes innovation and efficiencies can help doctors resurrect their profession's image and their control over it--and perhaps even reinvent American health care.

Fall conservation deep tillage stabilizes maize residues into soil organic matter

USDA-ARS?s Scientific Manuscript database

Efforts for increasing soil organic matter (SOM) content under agricultural systems have primarily focused on management practices that reduce exposure of SOM to decomposition via minimum tillage. We assess an alternative approach, termed ‘fall conservation deep tillage’ (FCDT), to SOM stabilization...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The 21st Century Power Partnership's program in Mexico (21CPP Mexico) is one initiative of the Clean Energy Ministerial, carried out in cooperation with government and local stakeholders, drawing upon an international community of power system expertise. The overall goal of this program is to support Mexico's power system transformation by accelerating the transition to a reliable, financially robust, and low-carbon system. 21CPP Mexico activities focus on achieving positive outcomes for all participants, especially addressing critical questions and challenges facing policymakers, regulators, and system operators. In support of this goal, 21CPP Mexico taps into deep networks of expertise and professional connections.

Engineers Clean Mirror with Carbon Dioxide Snow

NASA Image and Video Library

2015-01-22

Just like drivers sometimes use snow to clean their car mirrors in winter, two Exelis Inc. engineers are practicing "snow cleaning'" on a test telescope mirror for the James Webb Space Telescope at NASA's Goddard Space Flight Center in Greenbelt, Maryland. By shooting carbon dioxide snow at the surface, engineers are able to clean large telescope mirrors without scratching them. "The snow-like crystals (carbon dioxide snow) knock contaminate particulates and molecules off the mirror," said Lee Feinberg, NASA optical telescope element manager. This technique will only be used if the James Webb Space Telescope's mirror is contaminated during integration and testing. The Webb telescope is the scientific successor to NASA's Hubble Space Telescope. It will be the most powerful space telescope ever built. With a mirror seven times as large as Hubble's and infrared capability, Webb will be capturing light from 13.5 billion light years away. To do this, its mirror must be kept super clean. "Small dust particles or molecules can impact the science that can be done with the Webb," said Feinberg. "So cleanliness especially on the mirrors is critical." Webb is an international project led by NASA with its partners, the European Space Agency and the Canadian Space Agency. Image credit: NASA/Goddard/Chris Gunn

Diverging effects of clean versus dirty money on attitudes, values, and interpersonal behavior.

PubMed

Yang, Qing; Wu, Xiaochang; Zhou, Xinyue; Mead, Nicole L; Vohs, Kathleen D; Baumeister, Roy F

2013-03-01

Does the cue of money lead to selfish, greedy, exploitative behaviors or to fairness, exchange, and reciprocity? We found evidence for both, suggesting that people have both sets of meaningful associations, which can be differentially activated by exposure to clean versus dirty money. In a field experiment at a farmers' market, vendors who handled dirty money subsequently cheated customers, whereas those who handled clean money gave fair value (Experiment 1). In laboratory studies with economic games, participants who had previously handled and counted dirty money tended toward selfish, unfair practices-unlike those who had counted clean money or dirty paper, both of which led to fairness and reciprocity. These patterns were found with the trust game (Experiment 2), the prisoner's dilemma (Experiment 4), the ultimatum game (Experiment 5), and the dictator game (Experiment 6). Cognitive measures indicated that exposure to dirty money lowered moral standards (Experiment 3) and reduced positive attitudes toward fairness and reciprocity (Experiments 6-7), whereas exposure to clean money had the opposite effects. Thus, people apparently have 2 contradictory sets of associations (including behavioral tendencies) to money, which is a complex, powerful, and ubiquitous aspect of human social life and cultural organization. PsycINFO Database Record (c) 2013 APA, all rights reserved

Evaluating and operationalizing an environmental auditing program: a pilot study.

PubMed

Gordon, Laura; Bruce, Natalie; Suh, Kathryn N; Roth, Virginia

2014-07-01

Environmental auditing is an important tool to ensure consistent and effective cleaning. Our pilot study compared an alcohol-based fluorescent marking product and an adenosine-5'-triphosphate bioluminescence product for use in an environmental auditing program to determine which product was more practical and acceptable to users. Both products were tested on 15 preselected high touch objects in randomly selected patient rooms, following regular daily cleaning. A room was considered a "pass" if ≥80% of surfaces were adequately cleaned as defined by manufacturers' guidelines. A qualitative survey assessed user preference and operational considerations. Using fluorescent marking, 9 of 37 patient rooms evaluated (24%) were considered a "pass" after daily cleaning. Using adenosine-5'-triphosphate bioluminescence, 21 of 37 patient rooms passed (57%). There was great variability in results between different high touch objects. Eighty percent of users preferred the alcohol-based fluorescent marking product because it provided an effective visual aid to coach staff on proper cleaning techniques and allowed simple and consistent application. Environmental auditing using translucent, alcohol-based fluorescent marking best met the requirements of our organization. Our results reinforce the importance of involving a multidisciplinary team in evaluating and operationalizing an environmental auditing program. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Mattress cleanliness: the role of monitoring and maintenance.

PubMed

Aziz, Ann-Marie

A clean and tidy environment provides the right setting for good patient care. It is fundamental in preventing and/or controlling the spread of healthcare-associated infections (HCAI). Cleanliness is an essential component for the comfort and dignity of patients, particularly those for whom a hospital is home for any length of time. Patients spend a lot of their time in bed so it is important for them to be provided with well maintained and clean mattresses. Beds, and especially the mattresses, should be cleaned and inspected regularly so patients know they are being cared for in a clean and safe environment. To prolong the life of the mattress and reduce infection risks, inspections for damage and contamination must take place on a regular basis. Assessment criteria for the audit of a mattress can include a visual inspection, a cover permeability test and a foam support surface test. These assessments will ensure the mattress is compliant with current standards and identify whether or not they require condemning. Mattress care can be improved by adopting unified good practices that can be standardized and audited regularly.

Laser cleaning of ITER's diagnostic mirrors

NASA Astrophysics Data System (ADS)

Skinner, C. H.; Gentile, C. A.; Doerner, R.

2012-10-01

Practical methods to clean ITER's diagnostic mirrors and restore reflectivity will be critical to ITER's plasma operations. We report on laser cleaning of single crystal molybdenum mirrors coated with either carbon or beryllium films 150 - 420 nm thick. A 1.06 μm Nd laser system provided 220 ns pulses at 8 kHz with typical power densities of 1-2 J/cm^2. The laser beam was fiber optically coupled to a scanner suitable for tokamak applications. The efficacy of mirror cleaning was assessed with a new technique that combines microscopic imaging and reflectivity measurements [1]. The method is suitable for hazardous materials such as beryllium as the mirrors remain sealed in a vacuum chamber. Excellent restoration of reflectivity for the carbon coated Mo mirrors was observed after laser scanning under vacuum conditions. For the beryllium coated mirrors restoration of reflectivity has so far been incomplete and modeling indicates that a shorter duration laser pulse is needed. No damage of the molybdenum mirror substrates was observed.[4pt][1] C.H. Skinner et al., Rev. Sci. Instrum. at press.

BACTERIAL CONTAMINATION OF STETHOSCOPES

PubMed Central

Bukharie, Huda A.; Al-Zahrani, Hussain; Rubaish, Abdullah M.; Abdulmohsen, Mohammed F.

2004-01-01

Background: A stethoscope, an essential tool of the medical profession, can become a source of nosocomial infection. Objective: To determine the frequency of bacterial contamination of stethoscopes as well as the practices used for cleaning them. Methods: Cultures were taken from 100 stethoscopes used by different medical personnel in different hospital services. The stethoscopes were collected while the staff filled in a questionnaire. Results: Thirty (30%) out of the 100 stethoscopes surveyed were contaminated with microorganisms. The majority of organisms isolated were gram-positive bacteria (gram positive bacilli 12%, gram-negative bacteria 9%, gram-positive cocci 9%). None of the stethoscopes grew methicillin-resistant staphylococcus aureus. Overall, 21% of the health personnel cleaned their stethoscopes daily, 47% weekly, and 32% yearly. None of the health care workers cleaned their stethoscopes after every patient. Nurses cleaned their stethoscopes more often than physicians and medical students. Conclusion: Stethoscopes may be important in the spread of infectious agents. Their regular disinfection after use on each patient should be considered, particularly in such areas of the hospital, as the critical care units, and oncology units which house many patients with antibiotic-resistant organisms. PMID:23012043

Medical risks of wilderness hiking.

PubMed

Boulware, David R; Forgey, William W; Martin, William J

2003-03-01

We sought to determine the extent to which injuries and illnesses limit long-distance or endurance outdoor recreational activities. In a prospective surveillance study, 334 persons who hiked the Appalachian Trail for at least 7 days (mean [+/- SD] length of hike, 140 +/- 60 days) in 1997 were interviewed. At the end of their hike, subjects completed a questionnaire on injuries, illnesses, water purification methods, and hygiene practices. Of the 280 backpackers who responded (a combined 38,940 days of wilderness exposure), 69% (n = 192) achieved their goal. The most important reasons for ending a hike prematurely were injury, time limitation, and psychosocial reasons. The most common medical complaints were feet blisters (64%; n = 180), diarrhea (56%, n = 156), skin irritation (51%, n = 143), and acute joint pain (36%, n = 102). The incidence of vector-borne disease was 4% (n = 11); physician-diagnosed Lyme disease was the most common, and 24% of hikers (n = 68) reported tick bites. The risk of diarrhea was greater among those who frequently drank untreated water from streams or ponds (odds ratio [OR] = 7.7; 95% confidence interval [CI]: 2.7 to 23; P <0.0001), whereas practicing "good hygiene" (defined as routine cleaning of cooking utensils and cleaning hands after bowel movements) was associated with a decreased risk (OR = 0.46; 95% CI: 0.22 to 0.97; P =0.04). Diarrhea is the most common illness limiting long-distance hikers. Hikers should purify water routinely, avoiding using untreated surface water. The risk of gastrointestinal illness can also be reduced by maintaining personal hygiene practices and cleaning cookware.

Potential sources of microbial contamination in unpasteurized apple cider.

PubMed

Garcia, Luis; Henderson, John; Fabri, Martha; Oke, Moustapha

2006-01-01

A study was conducted to identify possible sources of microbial contamination and to assess the effect of good cleaning and sanitation practices on the microbial quality and safety of unpasteurized apple cider. Raw unwashed apples, washed apples, cleaning water, fresh cider, and finished cider samples were collected from five Ontario producers over 4 months and microbiologically tested. Total coliforms were found in 31, 71 and 38% of the unwashed apple, water, and washed apple samples, respectively. Escherichia coli was found in 40% of the water samples from one producer alone. The washing step was identified as a potential source of contamination, possibly due to water in the dump tanks seldom being refreshed, and because scrubbers, spray nozzles, and conveyors were not properly cleaned and sanitized. Higher total coliform counts (P < 0.0001) and prevalence (P < 0.0001) in fresh cider compared with those in unwashed apples and washed apples indicated considerable microbial buildup along the process, possibly explained by the lack of appropriate equipment sanitation procedures. Results showed that producers who had better sanitary practices in place had lower (P < 0.001) total coliform prevalence than the rest of the producers. Overall results show that good sanitation procedures are associated with improved microbial quality of fresh cider in terms of total coliforms and that operators who pasteurize and/or UV treat their product should still be required to have a sound good manufacturing practices program in place to prevent recontamination. Cryptosporidium parvum, an important pathogen for this industry, was found in different sample types, including washed apples, water, and fresh and finished cider.

75 FR 62759 - Notice of Proposed Change to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... following practice standards: 314, Brush Management, 324, Deep Tillage, 330, Contour Farming, 332, Contour.... These practices will be used to plan and install conservation practices. DATES: Comments will be...-1737. Copies of the practice standards will be made available upon written request to the address shown...

Is Multitask Deep Learning Practical for Pharma?

PubMed

Ramsundar, Bharath; Liu, Bowen; Wu, Zhenqin; Verras, Andreas; Tudor, Matthew; Sheridan, Robert P; Pande, Vijay

2017-08-28

Multitask deep learning has emerged as a powerful tool for computational drug discovery. However, despite a number of preliminary studies, multitask deep networks have yet to be widely deployed in the pharmaceutical and biotech industries. This lack of acceptance stems from both software difficulties and lack of understanding of the robustness of multitask deep networks. Our work aims to resolve both of these barriers to adoption. We introduce a high-quality open-source implementation of multitask deep networks as part of the DeepChem open-source platform. Our implementation enables simple python scripts to construct, fit, and evaluate sophisticated deep models. We use our implementation to analyze the performance of multitask deep networks and related deep models on four collections of pharmaceutical data (three of which have not previously been analyzed in the literature). We split these data sets into train/valid/test using time and neighbor splits to test multitask deep learning performance under challenging conditions. Our results demonstrate that multitask deep networks are surprisingly robust and can offer strong improvement over random forests. Our analysis and open-source implementation in DeepChem provide an argument that multitask deep networks are ready for widespread use in commercial drug discovery.

Sterilization, high-level disinfection, and environmental cleaning.

PubMed

Rutala, William A; Weber, David J

2011-03-01

Failure to perform proper disinfection and sterilization of medical devices may lead to introduction of pathogens, resulting in infection. New techniques have been developed for achieving high-level disinfection and adequate environmental cleanliness. This article examines new technologies for sterilization and high-level disinfection of critical and semicritical items, respectively, and because semicritical items carry the greatest risk of infection, the authors discuss reprocessing semicritical items such as endoscopes and automated endoscope reprocessors, endocavitary probes, prostate biopsy probes, tonometers, laryngoscopes, and infrared coagulation devices. In addition, current issues and practices associated with environmental cleaning are reviewed. Copyright © 2011. Published by Elsevier Inc.

Guideline series: Control of volatile organic compound emissions from wood furniture manufacturing operations, April 1996. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-04-01

This Control Techniques Guideline (CTG) provides the necessary guidance for development of regulations to limit emissions of volatile organic compounds (VOC) from wood furniture finishing and cleaning operations. This guidance includes emission limits for specific wood furniture finishing steps and work practices to reduce waste and evaporation through pollution prevention methods; these represent available control technology for wood furniture finishing and cleaning operations. This document is intended to provide State and local air pollution authorities with an information base for proceeding with their own analyses of RACT to meet statutory requirements.

Environmental and body contamination from cleaning vomitus in a health care setting: A simulation study.

PubMed

Phan, Linh; Su, Yu-Min; Weber, Rachel; Fritzen-Pedicini, Charissa; Edomwande, Osayuwamen; Jones, Rachael M

2018-04-01

Environmental service workers may be exposed to pathogens during the cleaning of pathogen-containing bodily fluids. Participants with experience cleaning hospital environments were asked to clean simulated, fluorescein-containing vomitus using normal practices in a simulated patient room. Fluorescein was visualized in the environment and on participants under black lights. Fluorescein was quantitatively measured on the floor, in the air, and on gloves and shoe covers. In all 21 trials involving 7 participants, fluorescein was found on the floor after cleaning and on participants' gloves. Lower levels of floor contamination were associated with the use of towels to remove bulk fluid (ρ = -0.56, P = .01). Glove contamination was not associated with the number or frequency of contacts with environmental surfaces, suggesting contamination occurs with specific events, such as picking up contaminated towels. Fluorescein contamination on shoe covers was measured in 19 trials. Fluorescein was not observed on participants' facial personal protective equipment, if worn, or faces. Contamination on other body parts, primarily the legs, was observed in 8 trials. Fluorescein was infrequently quantified in the air. Using towels to remove bulk fluid prior to mopping is part of the recommended cleaning protocol and should be used to minimize residual contamination. Contamination on shoes and the floor may serve as reservoirs for pathogens. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Preparation of Mica and Silicon Substrates for DNA Origami Analysis and Experimentation

PubMed Central

Pillers, Michelle A.; Shute, Rebecca; Farchone, Adam; Linder, Keenan P.; Doerfler, Rose; Gavin, Corey; Goss, Valerie; Lieberman, Marya

2015-01-01

The designed nature and controlled, one-pot synthesis of DNA origami provides exciting opportunities in many fields, particularly nanoelectronics. Many of these applications require interaction with and adhesion of DNA nanostructures to a substrate. Due to its atomically flat and easily cleaned nature, mica has been the substrate of choice for DNA origami experiments. However, the practical applications of mica are relatively limited compared to those of semiconductor substrates. For this reason, a straightforward, stable, and repeatable process for DNA origami adhesion on derivatized silicon oxide is presented here. To promote the adhesion of DNA nanostructures to silicon oxide surface, a self-assembled monolayer of 3-aminopropyltriethoxysilane (APTES) is deposited from an aqueous solution that is compatible with many photoresists. The substrate must be cleaned of all organic and metal contaminants using Radio Corporation of America (RCA) cleaning processes and the native oxide layer must be etched to ensure a flat, functionalizable surface. Cleanrooms are equipped with facilities for silicon cleaning, however many components of DNA origami buffers and solutions are often not allowed in them due to contamination concerns. This manuscript describes the set-up and protocol for in-lab, small-scale silicon cleaning for researchers who do not have access to a cleanroom or would like to incorporate processes that could cause contamination of a cleanroom CMOS clean bench. Additionally, variables for regulating coverage are discussed and how to recognize and avoid common sample preparation problems is described. PMID:26274888

EPA's Safe and Sustainable Water Resources Research Program

EPA Science Inventory

Increasing demands for sources of clean water—combined with changing land use practices, population growth, aging infrastructure, and climate change and variability—pose significant threats to our water resources. Failure to manage the Nation’s waters in an inte...

Emerging issues with silviculture practices in wetlands

Treesearch

Mike. Wylle

2016-01-01

Silviculture activities in wetlands involving discharges of dredge and/or fill material have been exempt from Clean Water Act (CWA) permits after the 1975 amendments to the CWA which were phased in by July 1977.

Response of deep-water corals to oil and chemical dispersant exposure

NASA Astrophysics Data System (ADS)

DeLeo, Danielle M.; Ruiz-Ramos, Dannise V.; Baums, Iliana B.; Cordes, Erik E.

2016-07-01

Cold-water corals serve as important foundation species by building complex habitat within deep-sea benthic communities. Little is known about the stress response of these foundation species yet they are increasingly exposed to anthropogenic disturbance as human industrial presence expands further into the deep sea. A recent prominent example is the Deepwater Horizon oil-spill disaster and ensuing clean-up efforts that employed chemical dispersants. This study examined the effects of bulk oil-water mixtures, water-accommodated oil fractions, the dispersant Corexit 9500A®, and the combination of hydrocarbons and dispersants on three species of corals living near the spill site in the Gulf of Mexico between 500 and 1100 m depths: Paramuricea type B3, Callogorgia delta and Leiopathes glaberrima. Following short-term toxicological assays (0-96 h), all three coral species examined showed more severe health declines in response to dispersant alone (2.3-3.4 fold) and the oil-dispersant mixtures (1.1-4.4 fold) than in the oil-only treatments. Higher concentrations of dispersant alone and the oil-dispersant mixtures resulted in more severe health declines. C. delta exhibited somewhat less severe health declines than the other two species in response to oil and oil/dispersant mixture treatments, likely related to its increased abundance near natural hydrocarbon seeps. These experiments provide direct evidence for the toxicity of both oil and dispersant on deep-water corals, which should be taken into consideration in the development of strategies for intervention in future oil spills.

Supercritical CO2 Cleaning System for Planetary Protection and Contamination Control Applications

NASA Technical Reports Server (NTRS)

Lin, Ying; Zhong, Fang; Aveline, David C.; Anderson, Mark S.

2012-01-01

Current spacecraft-compatible cleaning protocols involve a vapor degreaser, liquid sonication, and alcohol wiping. These methods are not very effective in removing live and dead microbes from spacecraft piece parts of slightly complicated geometry, such as tubing and loosely fitted nuts and bolts. Contamination control practices are traditionally focused on cleaning and monitoring of particulate and oily residual. Vapor degreaser and outgassing bakeout have not been proven to be effective in removing some less volatile, hydrophilic biomolecules of significant relevance to life detection. A precision cleaning technology was developed using supercritical CO2 (SCC). SCC is used as both solvent and carrier for removing organic and particulate contaminants. Supercritical fluid, like SCC, is characterized by physical and thermal properties that are between those of the pure liquid and gas phases. The fluid density is a function of the temperature and pressure. Its solvating power can be adjusted by changing the pressure or temperature, or adding a secondary solvent such as alcohol or water. Unlike a regular organic solvent, SCC has higher diffusivities, lower viscosity, and lower surface tension. It readily penetrates porous and fibrous solids and can reach hard-to-reach surfaces of the parts with complex geometry. Importantly, the CO2 solvent does not leave any residue. The results using this new cleaning device demonstrated that both supercritical CO2 with 5% water as a co-solvent can achieve cleanliness levels of 0.01 mg/cm2 or less for contaminants of a wide range of hydrophobicities. Experiments under the same conditions using compressed Martian air mix, which consists of 95% CO2, produced similar cleaning effectiveness on the hydrophobic compounds. The main components of the SCC cleaning system are a high-pressure cleaning vessel, a boil-off vessel located downstream from the cleaning vessel, a syringe-type high-pressure pump, a heat exchanger, and a back pressure regulator (BPR). After soaking the parts to be cleaned in the clean vessel for a period, the CO2 with contaminants is flushed out of the cleaning vessel using fresh CO2 in a first-in-first-out (FIFO) method. The contaminants are either precipitating out in the boil-off container or being trapped in a filter subsystem. The parts to be cleaned are secured in a basket inside and can be rotated up to 1,400 rpm by a magnetic drive. The fluid flows within the vessel generate tangential forces on the parts surfaces, enhancing the cleaning effectiveness and shortening the soaking time. During the FIFO flushing, the pump subsystem pushes fresh CO2 into the cleaning vessel at a constant flow rate between 0.01 and 200 mL/min, while the BPR regulates the pressure in the cleaning vessel to within 0.1 bar by controlling the needle position in an outlet valve. The fresh CO2 gas flows through the heat exchanger at a given temperature before entering the cleaning vessel. A platinum resistance thermometer (PRT) reads the cleaning vessel interior temperature that can be controlled to within 0.1 K. As a result, cleaning vessel temperature remains constant during the FIFO flushing. There is no change in solvent power during FIFO flushing since both temperature and pressure inside the cleaning vessel remain unchanged, thus minimizing contaminants left behind. During decompression, both temperature and pressure are strictly controlled to prevent bubbles from generating in the cleaning vessel that could stir up the contaminants that sank to the bottom by gravity.

Teaching for Deep Learning

ERIC Educational Resources Information Center

Smith, Tracy Wilson; Colby, Susan A.

2007-01-01

The authors have been engaged in research focused on students' depth of learning as well as teachers' efforts to foster deep learning. Findings from a study examining the teaching practices and student learning outcomes of sixty-four teachers in seventeen different states (Smith et al. 2005) indicated that most of the learning in these classrooms…

Depth of Information Processing and Memory for Medical Facts.

ERIC Educational Resources Information Center

Slade, Peter D.; Onion, Carl W. R.

1995-01-01

The current emphasis in medical education is on engaging learners in deep processing of information to achieve better understanding of the subject matter. Traditional approaches aimed for memorization of medical facts; however, a good memory for medical facts is still essential in clinical practice. This study demonstrates that deep information…

Flame retardant exposure assessment: findings from a behavioral intervention study.

PubMed

Gibson, Elizabeth A; Stapleton, Heather M; Calero, Lehyla; Holmes, Darrell; Burke, Kimberly; Martinez, Rodney; Cortes, Boris; Nematollahi, Amy; Evans, David; Herbstman, Julie B

2018-06-28

Polybrominated diphenyl ethers (PBDEs) have been largely replaced by organophosphate flame retardants (OPFRs) and alternative brominated flame retardants (Alt-BFRs) to meet flammability requirements. Humans are ubiquitously exposed to some variety of flame retardants through contact with consumer products directly or through household dust. To evaluate the effectiveness of house cleaning and hand washing practices to reduce exposure to flame retardants, we measured concentrations in dermal hand wipes and urinary metabolites before and after assignment to two consecutive interventions. We selected 32 mother and child dyads from an existing cohort. This analysis focuses on mothers. Participants provided baseline measurements (urine, hand wipes, and questionnaires) and were then assigned for 1 week to either a house cleaning (including instruction on proper technique and cleaning supplies) or hand washing (including instruction on proper technique and soaps) intervention arm. For the second week, participants were assigned to the second intervention in addition to their initial assignment, thus all subjects both washed their hands and cleaned according to the intervention guidelines during week 2. We collected measurements at the end of weeks 1 and 2. We found reductions in urinary analytes after week 1 of house cleaning (BCIPHIPP and ip-DPHP), week 1 of hand washing (BCIPP, BCIPHIPP, and tbutyl-DPHP), and week 2 of combined interventions (BCIPHIPP and tbutyl-DPHP), compare to baseline. We found no significant decline in hand wipes in the entire sample but did find reductions after week 1 of house cleaning (BDE 209), week 1 of hand washing (TCEP), and week 2 of combined interventions (TDCIPP and BDE 209) in women with exposure above the median at baseline (verified through simulations). Exposure to individual flame retardants was reduced by about half, in some cases, by 1 week of increased hand washing, house cleaning to reduce dust, or combined activities.

Innovative Commercialization Efforts Underway at the National Renewable Energy Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheesbrough, Kate; Bader, Meghan

New clean energy and energy efficiency technology solutions hold the promise of significant reductions in energy consumption. However, proven barriers for these technologies, including the technological and commercialization valleys of death, result in promising technologies falling to the wayside. To address these gaps, NREL's Innovation & Entrepreneurship Center designs and manages advanced programs aimed at supporting the development and commercialization of early stage clean energy technologies with the goal of accelerating new technologies to market. These include: Innovation Incubator (IN2) in partnership with Wells Fargo: this technology incubator supports energy efficiency building-related startups to overcome market gaps by providing accessmore » to technical support at NREL; Small Business Voucher Pilot: this program offers paid vouchers for applicants to access a unique skill, capability, or facility at any of the 17 DOE National Laboratories to bring next-generation clean energy technologies to market; Energy Innovation Portal: NREL designed and developed the Energy Innovation Portal, providing access to EERE focused intellectual property available for licensing from all of the DOE National Laboratories; Lab-Corps: Lab-Corps aims to better train and empower national lab researchers to understand market drivers and successfully transition their discoveries into high-impact, real world technologies in the private sector; Incubatenergy Network: the Network provides nationwide coordination of clean energy business incubators, share best practices, support clean energy entrepreneurs, and help facilitate a smoother transition to a more sustainable clean energy economy; Industry Growth Forum: the Forum is the perfect venue for clean energy innovators to maximize their exposure to receptive capital and strategic partners. Since 2003, presenting companies have collectively raised more than $5 billion in growth financing.« less

Sustainable NREL: From Integration to Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-09-01

NREL's sustainability practices are integrated throughout the laboratory and are essential to our mission to develop clean energy and energy efficiency technologies and practices, advance related science and engineering, and provide knowledge and innovations to integrate energy systems at all scales. Sustainability initiatives are integrated through our campus, our staff, and our environment allowing NREL to provide leadership in modeling a sustainability energy future for companies, organizations, governments, and communities.

Incorporation of Hands-On Sterile Technique Instruction in an Introductory Pharmacy Practice Experience

PubMed Central

Cruthirds, Danielle; Coward, Lori

2015-01-01

Objective. To examine sterile technique and basic sterile compounding procedures among third-year pharmacy students. Design. Third year pharmacy students participating in an introductory pharmacy practice experience (IPPE) in 2012 (n=126) and 2013 (n=119) performed a modified low-risk compounded sterile product (CSP) media fill challenge test, then prepared a 5 mg/mL vancomycin solution that was subsequently analyzed for accuracy. Assessment. To identify deficiencies in sterile procedures, students were observed while performing a modified low-risk CSP media fill challenge test. In the first year of conducting the challenge test (2012), 3 deficiencies were identified: hand washing before compounding, cleaning items with alcohol prior to start, and cleaning work area upon completion. In 2013, significant improvements were observed in these 3 areas after students watched a demonstration video. Examination of CSPs revealed less than 1% contamination in both years. Analysis of compounded vancomycin solutions showed that 84% and 71% of students prepared solutions in 2012 and 2013, respectively, were within 10% of the targeted final concentration. Conclusion. Hands-on sterile compounding exercises are typically delivered early in the pharmacy professional curriculum with minimal reinforcement in subsequent years. Providing opportunities for advanced pharmacy students to refresh and practice sterile compounding procedures allows students to refine their skills before entering pharmacy practice. PMID:25861109

Surveillance of Environmental and Procedural Measures of Infection Control in the Operating Theatre Setting

PubMed Central

Raggi, Alessandra; Sanna, Tiziana; Mazzetti, Magda; Orsi, Alessandra; Zanni, Angela; Farruggia, Patrizia

2017-01-01

The microbiological contamination of operating theatres and the lack of adherence to best practices by surgical staff represent some of the factors affecting Surgical Site Infections (SSIs). The aim of the present study was to assess the microbiological quality of operating settings and the staff compliance to the SSI evidence-based control measures. Ten operating rooms were examined for microbiological contamination of air and surfaces, after cleaning procedures, in “at rest” conditions. Furthermore, 10 surgical operations were monitored to assess staff compliance to the recommended practices. None of the air samples exceeded microbiological reference standards and only six of the 200 surface samples (3.0%) were slightly above recommended levels. Potentially pathogenic bacteria and moulds were never detected. Staff compliance to best practices varied depending on the type of behaviour investigated and the role of the operator. The major not compliant behaviours were: pre-operative skin antisepsis, crowding of the operating room and hand hygiene of the anaesthetist. The good environmental microbiological quality observed is indicative of the efficacy of the cleaning-sanitization procedures adopted. The major critical point was staff compliance to recommended practices. Awareness campaigns are therefore necessary, aimed at improving the organisation of work so as to facilitate compliance to operative protocols. PMID:29283367

Ultrahigh vacuum and low-temperature cleaning of oxide surfaces using a low-concentration ozone beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratt, A.; Department of Physics, University of York, Heslington, York YO10 5DD; Graziosi, P.

We present a novel method of delivering a low-concentration (<15%) ozone beam to an ultra-high vacuum environment for the purpose of cleaning and dosing experimental samples through oxidation processing. The system described is safe, low-cost, and practical and overcomes the limitations of ozone transport in the molecular flow environment of high or ultrahigh vacuum whilst circumventing the use of pure ozone gas which is potentially highly explosive. The effectiveness of this method in removing surface contamination is demonstrated through comparison of high-temperature annealing of a simple oxide (MgO) in ozone and oxygen environments as monitored using quadrupole mass spectroscopy andmore » Auger electron spectroscopy. Additionally, we demonstrate the potential of ozone for obtaining clean complex oxide surfaces without the need for high-temperature annealing which may significantly alter surface structure.« less

Electrostatically clean solar array

NASA Technical Reports Server (NTRS)

Stern, Theodore Garry (Inventor); Krumweide, Duane Eric (Inventor)

2004-01-01

Provided are methods of manufacturing an electrostatically clean solar array panel and the products resulting from the practice of these methods. The preferred method uses an array of solar cells, each with a coverglass where the method includes machining apertures into a flat, electrically conductive sheet so that each aperture is aligned with and undersized with respect to its matched coverglass sheet and thereby fashion a front side shield with apertures (FSA). The undersized portion about each aperture of the bottom side of the FSA shield is bonded to the topside portions nearest the edges of each aperture's matched coverglass. Edge clips are attached to the front side aperture shield edges with the edge clips electrically and mechanically connecting the tops of the coverglasses to the solar panel substrate. The FSA shield, edge clips and substrate edges are bonded so as to produce a conductively grounded electrostatically clean solar array panel.

DEEP WIDEBAND SINGLE POINTINGS AND MOSAICS IN RADIO INTERFEROMETRY: HOW ACCURATELY DO WE RECONSTRUCT INTENSITIES AND SPECTRAL INDICES OF FAINT SOURCES?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rau, U.; Bhatnagar, S.; Owen, F. N., E-mail: rurvashi@nrao.edu

Many deep wideband wide-field radio interferometric surveys are being designed to accurately measure intensities, spectral indices, and polarization properties of faint source populations. In this paper, we compare various wideband imaging methods to evaluate the accuracy to which intensities and spectral indices of sources close to the confusion limit can be reconstructed. We simulated a wideband single-pointing (C-array, L-Band (1–2 GHz)) and 46-pointing mosaic (D-array, C-Band (4–8 GHz)) JVLA observation using a realistic brightness distribution ranging from 1 μ Jy to 100 mJy and time-, frequency-, polarization-, and direction-dependent instrumental effects. The main results from these comparisons are (a) errors in themore » reconstructed intensities and spectral indices are larger for weaker sources even in the absence of simulated noise, (b) errors are systematically lower for joint reconstruction methods (such as Multi-Term Multi-Frequency-Synthesis (MT-MFS)) along with A-Projection for accurate primary beam correction, and (c) use of MT-MFS for image reconstruction eliminates Clean-bias (which is present otherwise). Auxiliary tests include solutions for deficiencies of data partitioning methods (e.g., the use of masks to remove clean bias and hybrid methods to remove sidelobes from sources left un-deconvolved), the effect of sources not at pixel centers, and the consequences of various other numerical approximations within software implementations. This paper also demonstrates the level of detail at which such simulations must be done in order to reflect reality, enable one to systematically identify specific reasons for every trend that is observed, and to estimate scientifically defensible imaging performance metrics and the associated computational complexity of the algorithms/analysis procedures.« less

Wetlands Mitigation for Highway Impacts: A Nationwide Survey of State Practices

DOT National Transportation Integrated Search

1999-06-01

This report documents a review of Clean Water Act Section 404 mitigation projects undertaken in the contiguous United States that are applicable to highway development in Texas. In gathering the information about the experiences of transportation-rel...

Clean Air Act Section 112(d)(6) Technology Review for Pulping and Papermaking Processes Memorandum

EPA Pesticide Factsheets

The purpose of this November 2011 document is to present the results of a review of available information on developments in practices, processes, and control technologies that apply to pulping and papermaking processes.

The SEED Initiative

ERIC Educational Resources Information Center

Teich, Carolyn R.

2011-01-01

Committed to fulfilling the promise of the green economy, the American Association of Community Colleges (AACC) launched the Sustainability Education and Economic Development (SEED) initiative (www.theseedcenter.org) in October 2010. The project advances sustainability and clean energy workforce development practices at community colleges by…

7 CFR 51.1541 - U.S. No. 1.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... the following requirements: (a) Similar varietal characteristics; (b) Firm; (c) Fairly clean; 2 2...

7 CFR 51.598 - U.S. Grade B.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... celery of similar varietal characteristics which are fairly well developed, which are clean, well trimmed...

78 FR 8583 - Notice of Lodging of Proposed Consent Decree Under the Clean Air Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-06

... that resulted in exceedances of the national ambient air quality standard for lead, failed to use good air pollution control practices for minimizing lead emissions, and caused a common law nuisance at its...

Effectiveness study of UNL's pneumatic crack/joint preparation device.

DOT National Transportation Integrated Search

2014-03-01

The aim of this project was to evaluate the effectiveness of the crack cleaning device (CCD) for improving the current crack/joint preparation practices and for possible adoption as a standard in Nebraska Department of Roads (NDOR). Through the colla...

Safety risks of hydrogen fuel for applications in transportation vehicles.

DOT National Transportation Integrated Search

2009-04-01

Combustion of hydrocarbon fuels in many practical applications produces pollutants that are harmful to human health and environment. Hydrogen fuel is considered to be a potential answer to the clean energy demands, especially with the advances in fue...

Evaluation of a pulsed-xenon ultraviolet room disinfection device for impact on contamination levels of methicillin-resistant Staphylococcus aureus.

PubMed

Jinadatha, Chetan; Quezada, Ricardo; Huber, Thomas W; Williams, Jason B; Zeber, John E; Copeland, Laurel A

2014-04-07

Healthcare-acquired infections with methicillin-resistant Staphylococcus aureus (MRSA) are a significant cause of increased mortality, morbidity and additional health care costs in United States. Surface decontamination technologies that utilize pulsed xenon ultraviolet light (PPX-UV) may be effective at reducing microbial burden. The purpose of this study was to compare standard manual room-cleaning to PPX-UV disinfection technology for MRSA and bacterial heterotrophic plate counts (HPC) on high-touch surfaces in patient rooms. Rooms vacated by patients that had a MRSA-positive polymerase chain reaction or culture during the current hospitalization and at least a 2-day stay were studied. 20 rooms were then treated according to one of two protocols: standard manual cleaning or PPX-UV. This study evaluated the reduction of MRSA and HPC taken from five high-touch surfaces in rooms vacated by MRSA-positive patients, as a function of cleaning by standard manual methods vs a PPX-UV area disinfection device. Colony counts in 20 rooms (10 per arm) prior to cleaning varied by cleaning protocol: for HPC, manual (mean = 255, median = 278, q1-q3 132-304) vs PPX-UV (mean = 449, median = 365, q1-q3 332-530), and for MRSA, manual (mean = 127; median = 28.5; q1-q3 8-143) vs PPX-UV (mean = 108; median = 123; q1-q3 14-183). PPX-UV was superior to manual cleaning for MRSA (adjusted incident rate ratio [IRR] = 7; 95% CI <1-41) and for HPC (IRR = 13; 95% CI 4-48). PPX-UV technology appears to be superior to manual cleaning alone for MRSA and HPC. Incorporating 15 minutes of PPX-UV exposure time to current hospital room cleaning practice can improve the overall cleanliness of patient rooms with respect to selected micro-organisms.

Evaluation of a pulsed-xenon ultraviolet room disinfection device for impact on contamination levels of methicillin-resistant Staphylococcus aureus

PubMed Central

2014-01-01

Background Healthcare-acquired infections with methicillin-resistant Staphylococcus aureus (MRSA) are a significant cause of increased mortality, morbidity and additional health care costs in United States. Surface decontamination technologies that utilize pulsed xenon ultraviolet light (PPX-UV) may be effective at reducing microbial burden. The purpose of this study was to compare standard manual room-cleaning to PPX-UV disinfection technology for MRSA and bacterial heterotrophic plate counts (HPC) on high-touch surfaces in patient rooms. Methods Rooms vacated by patients that had a MRSA-positive polymerase chain reaction or culture during the current hospitalization and at least a 2-day stay were studied. 20 rooms were then treated according to one of two protocols: standard manual cleaning or PPX-UV. This study evaluated the reduction of MRSA and HPC taken from five high-touch surfaces in rooms vacated by MRSA-positive patients, as a function of cleaning by standard manual methods vs a PPX-UV area disinfection device. Results Colony counts in 20 rooms (10 per arm) prior to cleaning varied by cleaning protocol: for HPC, manual (mean = 255, median = 278, q1-q3 132–304) vs PPX-UV (mean = 449, median = 365, q1-q3 332–530), and for MRSA, manual (mean = 127; median = 28.5; q1-q3 8–143) vs PPX-UV (mean = 108; median = 123; q1-q3 14–183). PPX-UV was superior to manual cleaning for MRSA (adjusted incident rate ratio [IRR] = 7; 95% CI <1-41) and for HPC (IRR = 13; 95% CI 4–48). Conclusion PPX-UV technology appears to be superior to manual cleaning alone for MRSA and HPC. Incorporating 15 minutes of PPX-UV exposure time to current hospital room cleaning practice can improve the overall cleanliness of patient rooms with respect to selected micro-organisms. PMID:24708734

Evaluation and control of corrosion and encrustation in tube wells of the Indus Plains, West Pakistan

USGS Publications Warehouse

Clarke, Frank Eldridge; Barnes, Ivan

1969-01-01

Seepage from rivers and irrigation canals has contributed to waterlogging and soil salinization problems in much of the Indus Plains of West Pakistan. These problems are being overcome in part by tube-well dewatering and deep leaching of salinized soils. The ground waters described here are anaerobic and some are supersaturated with troublesome minerals such as calcium carbonate (calcite) and iron carbonate (siderite). These waters are moderately corrosive to steel. Some wells contain sulfate-reducing bacteria, which catalyze corrosion, and pH-electrode potential relationships favorable to the solution of iron also are rather common. Corrosion is concentrated in the relatively active (anodic) saw slots of water-well filter pipes (screens), where metal loss is least tolerable. Local changes in chemical properties of the water, because of corrosion, apparently cause deposition of calcium carbonate, iron carbonate, and other minerals which clog the filter pipes. In some places well capacities are seriously reduced in very short periods of time. There appears to be no practicable preventive treatment for corrosion and encrustation in these wells. Even chemical sterilization for bacterial control has yielded poor results. Periodic rehabilitation by down-hole blasting or by other effective mechanical or chemical cleaning methods will prolong well life. It may be possible to repair severely damaged well screens by inserting perforated sleeves of plastic or other inert material. The most promising approach to future, well-field development is to use filter pipes of epoxy-resin-bonded fiber glass, stainless steel, or other inert material which minimizes both corrosion and corrosion-catalyzed encrustation. Fiberglass plastic pipe appears to be the most economically practicable construction material at this time and already is being used with promising results.

Cleaning products and air fresheners: emissions and resulting concentrations of glycol ethers and terpenoids.

PubMed

Singer, B C; Destaillats, H; Hodgson, A T; Nazaroff, W W

2006-06-01

Experiments were conducted to quantify emissions and concentrations of glycol ethers and terpenoids from cleaning product and air freshener use in a 50-m3 room ventilated at approximately 0.5/h. Five cleaning products were applied full-strength (FS); three were additionally used in dilute solution. FS application of pine-oil cleaner (POC) yielded 1-h concentrations of 10-1300 microg/m3 for individual terpenoids, including alpha-terpinene (90-120), d-limonene (1000-1100), terpinolene (900-1300), and alpha-terpineol (260-700). One-hour concentrations of 2-butoxyethanol and/or d-limonene were 300-6000 microg/m3 after FS use of other products. During FS application including rinsing with sponge and wiping with towels, fractional emissions (mass volatilized/dispensed) of 2-butoxyethanol and d-limonene were 50-100% with towels retained, and approximately 25-50% when towels were removed after cleaning. Lower fractions (2-11%) resulted from dilute use. Fractional emissions of terpenes from FS use of POC were approximately 35-70% with towels retained, and 20-50% with towels removed. During floor cleaning with dilute solution of POC, 7-12% of dispensed terpenes were emitted. Terpene alcohols were emitted at lower fractions: 7-30% (FS, towels retained), 2-9% (FS, towels removed), and 2-5% (dilute). During air-freshener use, d-limonene, dihydromyrcenol, linalool, linalyl acetate, and beta-citronellol) were emitted at 35-180 mg/day over 3 days while air concentrations averaged 30-160 microg/m3. While effective cleaning can improve the healthfulness of indoor environments, this work shows that use of some consumer cleaning agents can yield high levels of volatile organic compounds, including glycol ethers--which are regulated toxic air contaminants--and terpenes that can react with ozone to form a variety of secondary pollutants including formaldehyde and ultrafine particles. Persons involved in cleaning, especially those who clean occupationally or often, might encounter excessive exposures to these pollutants owing to cleaning product emissions. Mitigation options include screening of product ingredients and increased ventilation during and after cleaning. Certain practices, such as the use of some products in dilute solution vs. full-strength and the prompt removal of cleaning supplies from occupied spaces, can reduce emissions and exposures to 2-butoxyethanol and other volatile constituents. Also, it may be prudent to limit use of products containing ozone-reactive constituents when indoor ozone concentrations are elevated either because of high ambient ozone levels or because of the indoor use of ozone-generating equipment.

Corrective Action Plan for Corrective Action Unit 562: Waste Systems, Nevada National Security Site, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

2011-04-30

This Corrective Action Plan has been prepared for Corrective Action Unit (CAU) 562, Waste Systems, in accordance with the Federal Facility Agreement and Consent Order (1996; as amended March 2010). CAU 562 consists of 13 Corrective Action Sites (CASs) located in Areas 2, 23, and 25 of the Nevada National Security Site. Site characterization activities were performed in 2009 and 2010, and the results are presented in Appendix A of the Corrective Action Decision Document for CAU 562. The scope of work required to implement the recommended closure alternatives is summarized. (1) CAS 02-26-11, Lead Shot, will be clean closedmore » by removing shot. (2) CAS 02-44-02, Paint Spills and French Drain, will be clean closed by removing paint and contaminated soil. As a best management practice (BMP), asbestos tile will be removed. (3) CAS 02-59-01, Septic System, will be clean closed by removing septic tank contents. As a BMP, the septic tank will be removed. (4) CAS 02-60-01, Concrete Drain, contains no contaminants of concern (COCs) above action levels. No further action is required; however, as a BMP, the concrete drain will be removed. (5) CAS 02-60-02, French Drain, was clean closed. Corrective actions were completed during corrective action investigation activities. As a BMP, the drain grates and drain pipe will be removed. (6) CAS 02-60-03, Steam Cleaning Drain, will be clean closed by removing contaminated soil. As a BMP, the steam cleaning sump grate and outfall pipe will be removed. (7) CAS 02-60-04, French Drain, was clean closed. Corrective actions were completed during corrective action investigation activities. (8) CAS 02-60-05, French Drain, will be clean closed by removing contaminated soil. (9) CAS 02-60-06, French Drain, contains no COCs above action levels. No further action is required. (10) CAS 02-60-07, French Drain, requires no further action. The french drain identified in historical documentation was not located during corrective action investigation activities. (11) CAS 23-60-01, Mud Trap Drain and Outfall, will be clean closed by removing sediment from the mud trap. As a BMP, the mud trap and outfall pipe will be removed. (12) CAS 23-99-06, Grease Trap, will be clean closed by removing sediment from the grease trap and backfilling the grease trap with grout. (13) CAS 25-60-04, Building 3123 Outfalls, will be clean closed by removing contaminated soil and the sludge-containing outfall pipe.« less

Student Deep Learning in Bachelor English Programs within Pakistani Universities

ERIC Educational Resources Information Center

Tahir, Khazima

2015-01-01

The purpose of this study was to contrast undergraduate students' descriptions about transformational teaching practices, and student deep learning in bachelor English programs in selected universities within Pakistan. This study utilized a survey to gather responses from five hundred and twenty three students. A paired sample t test was utilized…

How Enterprise Education Can Promote Deep Learning to Improve Student Employability

ERIC Educational Resources Information Center

Moon, Rob; Curtis, Vic; Dupernex, Simon

2013-01-01

This paper focuses on identifying the approaches students take to their learning, with particular regard to issues of enterprise, entrepreneurship and innovation when comparing the traditional lecture format to a more applied, practice-based case study format. The notions of deep and surface learning are used to explain student learning. More…

Primary Science Teaching--Is It Integral and Deep Experience for Students?

ERIC Educational Resources Information Center

Timoštšuk, Inge

2016-01-01

Integral and deep pedagogical content knowledge can support future primary teachers' ability to follow ideas of education for sustainability in science class. Initial teacher education provides opportunity to learn what and how to teach but still the practical experiences of teaching can reveal uneven development of student teachers'…

Enhancing Deep Learning: Lessons from the Introduction of Learning Teams in Management Education in France

ERIC Educational Resources Information Center

Borredon, Liz; Deffayet, Sylvie; Baker, Ann C.; Kolb, David

2011-01-01

Drawing from the reflective teaching and learning practices recommended in influential publications on learning styles, experiential learning, deep learning, and dialogue, the authors tested the concept of "learning teams" in the framework of a leadership program implemented for the first time in a top French management school…

21 CFR 226.30 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Construction and Maintenance of Facilities and Equipment § 226.30 Equipment. Equipment used for the manufacture, processing, packaging, bulk... maintained in a clean and orderly manner and shall be of suitable design, size, construction, and location to...

Perceptions of Improved Biomass and Liquefied Petroleum Gas Stoves in Puno, Peru: Implications for Promoting Sustained and Exclusive Adoption of Clean Cooking Technologies.

PubMed

Hollada, Jacqueline; Williams, Kendra N; Miele, Catherine H; Danz, David; Harvey, Steven A; Checkley, William

2017-02-13

Many households in low- and middle-income countries cook with inefficient biomass-burning stoves, which cause high levels of household air pollution and threaten long-term health. Although clean stoves and fuels are available, uptake and consistent use has been low. Using observations and in-depth interviews, we assessed the attitudes, preferences, and beliefs about traditional versus liquefied petroleum gas (LPG) stoves in rural Puno, Peru. A total of 31 in-depth interviews were conducted with primary cooks and their families, health workers, community leaders, and improved stove contractors. Six in-home observations of meal preparation were also conducted. Six major barriers to consistent use of clean stoves were identified: (1) perceived differences in food taste and nutrition by stove type; (2) cooking niches filled by different stoves; (3) social norms related to cooking practices; (4) safety concerns; (5) comparative costs of using different stoves; and (6) lack of awareness and concern about long-term health risks. These findings suggest that to successfully reduce household air pollution, clean cooking programs and policies must consider the many factors influencing adoption beyond health, such as cost, taste, fears, and cultural traditions. These factors could be incorporated into community-based and national efforts to scale-up sustained and exclusive adoption of clean cooking.

Perceptions of Improved Biomass and Liquefied Petroleum Gas Stoves in Puno, Peru: Implications for Promoting Sustained and Exclusive Adoption of Clean Cooking Technologies

PubMed Central

Hollada, Jacqueline; Williams, Kendra N.; Miele, Catherine H.; Danz, David; Harvey, Steven A.; Checkley, William

2017-01-01

Many households in low- and middle-income countries cook with inefficient biomass-burning stoves, which cause high levels of household air pollution and threaten long-term health. Although clean stoves and fuels are available, uptake and consistent use has been low. Using observations and in-depth interviews, we assessed the attitudes, preferences, and beliefs about traditional versus liquefied petroleum gas (LPG) stoves in rural Puno, Peru. A total of 31 in-depth interviews were conducted with primary cooks and their families, health workers, community leaders, and improved stove contractors. Six in-home observations of meal preparation were also conducted. Six major barriers to consistent use of clean stoves were identified: (1) perceived differences in food taste and nutrition by stove type; (2) cooking niches filled by different stoves; (3) social norms related to cooking practices; (4) safety concerns; (5) comparative costs of using different stoves; and (6) lack of awareness and concern about long-term health risks. These findings suggest that to successfully reduce household air pollution, clean cooking programs and policies must consider the many factors influencing adoption beyond health, such as cost, taste, fears, and cultural traditions. These factors could be incorporated into community-based and national efforts to scale-up sustained and exclusive adoption of clean cooking. PMID:28208813

Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization

NASA Astrophysics Data System (ADS)

Halloran, John W.

2016-07-01

Ceramic stereolithography and related additive manufacturing methods involving photopolymerization of ceramic powder suspensions are reviewed in terms of the capabilities of current devices. The practical fundamentals of the cure depth, cure width, and cure profile are related to the optical properties of the monomer, ceramic, and photo-active components. Postpolymerization steps, including harvesting and cleaning the objects, binder burnout, and sintering, are discussed and compared with conventional methods. The prospects for practical manufacturing are discussed.

Evaluation of two recommended disinfection methods for cleaning cloths used in food services of southern Brazil

PubMed Central

Bartz, Sabrina; Tondo, Eduardo Cesar

2013-01-01

In the State of Rio Grande do Sul (RS), Southern Brazil, a good manufacturing practices regulation was published recommending two disinfection methods for cleaning cloths used in food services. The aim of the present study was to evaluate the efficacy of those methods. Cleaning cloths were sampled without prior notice at food services, on common working days. For the analyses, the cloths were divided in two sub-samples, being one of them microbiologically analyzed. The second sub-sample was further divided in two pieces and submitted to hand washing for two minutes. After that, one piece was boiled in water for 15 min and the other one was soaked in a 200 ppm sodium hypochlorite solution for 15 min. Both pieces of cloth were submitted to microbiological analyses. Cleaning cloths presented total aerobic mean counts of 6.9 ± 6.7 log/cm2. All cleaning cloths presented coliform contamination, and 40% demonstrated mean counts of 6.2 ± 5.6 log/cm2. Presumptive S. aureus mean counts of 5.5 ± 4.9 log/cm2 were found. No statistic correlation was observed among the number of meals served daily in the food services and the microbiological contamination levels. After washing and disinfection, microbiological counts were significantly (p < 0.05) reduced by both methods, achieving an approximately 5 log reduction. The reductions achieved by the sodium hypochlorite soaking method and the boiling method were not significantly different. Thus, it was possible to conclude that both recommended methods were suitable to disinfect cleaning cloths used in food services. PMID:24516443

Quantitative determination and sampling of azathioprine residues for cleaning validation in production area.

PubMed

Fazio, Tatiana Tatit; Singh, Anil Kumar; Kedor-Hackmann, Erika Rosa Maria; Santoro, Maria Inês Rocha Miritello

2007-03-12

Cleaning validation is an integral part of current good manufacturing practices in any pharmaceutical industry. Nowadays, azathioprine and several other pharmacologically potent pharmaceuticals are manufactured in same production area. Carefully designed cleaning validation and its evaluation can ensure that residues of azathioprine will not carry over and cross contaminate the subsequent product. The aim of this study was to validate simple analytical method for verification of residual azathioprine in equipments used in the production area and to confirm efficiency of cleaning procedure. The HPLC method was validated on a LC system using Nova-Pak C18 (3.9 mm x 150 mm, 4 microm) and methanol-water-acetic acid (20:80:1, v/v/v) as mobile phase at a flow rate of 1.0 mL min(-1). UV detection was made at 280 nm. The calibration curve was linear over a concentration range from 2.0 to 22.0 microg mL(-1) with a correlation coefficient of 0.9998. The detection limit (DL) and quantitation limit (QL) were 0.09 and 0.29 microg mL(-1), respectively. The intra-day and inter-day precision expressed as relative standard deviation (R.S.D.) were below 2.0%. The mean recovery of method was 99.19%. The mean extraction-recovery from manufacturing equipments was 83.5%. The developed UV spectrophotometric method could only be used as limit method to qualify or reject cleaning procedure in production area. Nevertheless, the simplicity of spectrophotometric method makes it useful for routine analysis of azathioprine residues on cleaned surface and as an alternative to proposed HPLC method.

Effectiveness of bone cleaning process using chemical and entomology approaches: time and cost.

PubMed

Lai, Poh Soon; Khoo, Lay See; Mohd Hilmi, Saidin; Ahmad Hafizam, Hasmi; Mohd Shah, Mahmood; Nurliza, Abdullah; Nazni, Wasi Ahmad

2015-08-01

Skeletal examination is an important aspect of forensic pathology practice, requiring effective bone cleaning with minimal artefact. This study was conducted to compare between chemical and entomology methods of bone cleaning. Ten subjects between 20 and 40 years old who underwent uncomplicated medico-legal autopsies at the Institute of Forensic Medicine Malaysia were randomly chosen for this descriptive cross sectional study. The sternum bone was divided into 4 parts, each part subjected to a different cleaning method, being two chemical approaches i.e. laundry detergent and a combination of 6% hydrogen peroxide and powder sodium bicarbonate and two entomology approaches using 2nd instar maggots of Chrysomyia rufifacies and Ophyra spinigera. A scoring system for grading the outcome of cleaning was used. The effectiveness of the methods was evaluated based on average weight reduction per day and median number of days to achieve the average score of less than 1.5 within 12 days of the bone cleaning process. Using maggots was the most time-effective and costeffective method, achieving an average weight reduction of 1.4 gm per day, a median of 11.3 days to achieve the desired score and an average cost of MYR 4.10 per case to reach the desired score within 12 days. This conclusion was supported by blind validation by forensic specialists achieving a 77.8% preference for maggots. Emission scanning electron microscopy evaluation also revealed that maggots especially Chrysomyia rufifacies preserved the original condition of the bones better allowing improved elucidation of bone injuries in future real cases.

Evaluation of two recommended disinfection methods for cleaning cloths used in food services of southern Brazil.

PubMed

Bartz, Sabrina; Tondo, Eduardo Cesar

2013-01-01

In the State of Rio Grande do Sul (RS), Southern Brazil, a good manufacturing practices regulation was published recommending two disinfection methods for cleaning cloths used in food services. The aim of the present study was to evaluate the efficacy of those methods. Cleaning cloths were sampled without prior notice at food services, on common working days. For the analyses, the cloths were divided in two sub-samples, being one of them microbiologically analyzed. The second sub-sample was further divided in two pieces and submitted to hand washing for two minutes. After that, one piece was boiled in water for 15 min and the other one was soaked in a 200 ppm sodium hypochlorite solution for 15 min. Both pieces of cloth were submitted to microbiological analyses. Cleaning cloths presented total aerobic mean counts of 6.9 ± 6.7 log/cm(2). All cleaning cloths presented coliform contamination, and 40% demonstrated mean counts of 6.2 ± 5.6 log/cm(2). Presumptive S. aureus mean counts of 5.5 ± 4.9 log/cm(2) were found. No statistic correlation was observed among the number of meals served daily in the food services and the microbiological contamination levels. After washing and disinfection, microbiological counts were significantly (p < 0.05) reduced by both methods, achieving an approximately 5 log reduction. The reductions achieved by the sodium hypochlorite soaking method and the boiling method were not significantly different. Thus, it was possible to conclude that both recommended methods were suitable to disinfect cleaning cloths used in food services.

Trace Fossil Evidence of Trematode-Bivalve Parasite-Host Interactions in Deep Time.

PubMed

Huntley, John Warren; De Baets, Kenneth

2015-01-01

Parasitism is one of the most pervasive phenomena amongst modern eukaryotic life and yet, relative to other biotic interactions, almost nothing is known about its history in deep time. Digenean trematodes (Platyhelminthes) are complex life cycle parasites, which have practically no body fossil record, but induce the growth of characteristic malformations in the shells of their bivalve hosts. These malformations are readily preserved in the fossil record, but, until recently, have largely been overlooked by students of the fossil record. In this review, we present the various malformations induced by trematodes in bivalves, evaluate their distribution through deep time in the phylogenetic and ecological contexts of their bivalve hosts and explore how various taphonomic processes have likely biased our understanding of trematodes in deep time. Trematodes are known to negatively affect their bivalve hosts in a number of ways including castration, modifying growth rates, causing immobilization and, in some cases, altering host behaviour making the host more susceptible to their own predators. Digeneans are expected to be significant agents of natural selection. To that end, we discuss how bivalves may have adapted to their parasites via heterochrony and suggest a practical methodology for testing such hypotheses in deep time. Copyright © 2015 Elsevier Ltd. All rights reserved.

Do European Standard Disinfectant tests truly simulate in-use microbial and organic soiling conditions on food preparation surfaces?

PubMed

Meyer, B; Morin, V N; Rödger, H-J; Holah, J; Bird, C

2010-04-01

The results from European standard disinfectant tests are used as one basis to approve the use of disinfectants in Europe. The design of these laboratory-based tests should thus simulate as closely as possible the practical conditions and challenges that the disinfectants would encounter in use. No evidence is available that the organic and microbial loading in these tests simulates actual levels in the food service sector. Total organic carbon (TOC) and total viable count (TVC) were determined on 17 visibly clean and 45 visibly dirty surfaces in two restaurants and the food preparation surfaces of a large retail store. These values were compared to reference values recovered from surfaces soiled with the organic and microbial loading, following the standard conditions of the European Surface Test for bactericidal efficacy, EN 13697. The TOC reference values for clean and dirty conditions were higher than the data from practice, but cannot be regarded as statistical outliers. This was considered as a conservative assessment; however, as additional nine TOC samples from visibly dirty surfaces were discarded from the analysis, as their loading made them impossible to process. Similarly, the recovery of test organisms from surfaces contaminated according to EN 13697 was higher than the TVC from visibly dirty surfaces in practice; though they could not be regarded as statistical outliers of the whole data field. No correlation was found between TVC and TOC in the sampled data, which re-emphasizes the potential presence of micro-organisms on visibly clean surfaces and thus the need for the same degree of disinfection as visibly dirty surfaces. The organic soil and the microbial burden used in EN disinfectant standards represent a realistic worst-case scenario for disinfectants used in the food service and food-processing areas.

Best practices in school food and nutrition units of public schools of Bayeux, PB, Brazil.

PubMed

Lopes, Ana Carolina de Carvalho; Pinto, Helen Ramalho Farias; Costa, Deborah Camila Ismael de Oliveira; Mascarenhas, Robson de Jesus; Aquino, Jailane de Souza

2015-07-01

The occurrence of foodborne illness outbreaks is increasing in schools, and due to the number of children who consume school meals as the only daily meal, this factor becomes even more worrisome. In this sense, the aim of this study was to evaluate the hygienic-health aspects of Food and Nutrition Units (SFNU) of public schools of Bayeux / PB in relation to the adoption of best practices in school food and nutrition. Data were collected through SFNU checklist during visits to units in 29 schools. The health risk of units evaluated was from regular to very high regarding structure and facilities, hygiene of food handlers, environment and food preparation. It was found that 10.3% of handlers used clean and adequate uniforms, and environment and equipment showed poor conservation status in 75.9% and 89.7% of Units, respectively; control of urban pests and vectors was not effective and cleaning of fresh produce was incorrectly conducted in 51.7% of SFNU of schools evaluated. It could be concluded that the production of meals in SFNU of schools evaluated does not meet the requirements established by the best practices in school food and nutrition.

Prediction of operating parameters range for ammonia removal unit in coke making by-products

NASA Astrophysics Data System (ADS)

Tiwari, Hari Prakash; Kumar, Rajesh; Bhattacharjee, Arunabh; Lingam, Ravi Kumar; Roy, Abhijit; Tiwary, Shambhu

2018-02-01

Coke oven gas treatment plants are well equipped with distributed control systems (DCS) and therefore recording the vast amount of operational data efficiently. Analyzing the stored information manually from historians is practically impossible. In this study, data mining technique was examined for lowering the ammonia concentration in clean coke oven gas. Results confirm that concentration of ammonia in clean coke oven gas depends on the average PCDC temperature; gas scrubber temperatures stripped liquor flow, stripped liquor concentration and stripped liquor temperature. The optimum operating ranges of the above dependent parameters using data mining technique for lowering the concentration of ammonia is described in this paper.

Illinois Clean Coal Institute 2005 annual report. Final technical report for the period September 1st, 2004, through August 31, 2005 on projects funded by the Illinois Department of Commerce and Economic Opportunity

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2005-11-08

This final technical report contains the abstracts and executive summaries of projects funded through the Illinois Clean Coal Institute solicitation entitled 'Request for proposals No. 04-1(ICCI/RFP04-1)'. Support of these projects is by the Office of Coal Development and Department of Commerce and Economic Opportunity. The projects fall into the following categories: advanced coal mining technologies; coal preparation and coal production business practice; management of coal combustion byproducts; commercialization and technology transfer. Final project extensions are also recorded.

Materials Chemistry and Performance of Silicone-Based Replicating Compounds.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brumbach, Michael T.; Mirabal, Alex James; Kalan, Michael

Replicating compounds are used to cast reproductions of surface features on a variety of materials. Replicas allow for quantitative measurements and recordkeeping on parts that may otherwise be difficult to measure or maintain. In this study, the chemistry and replicating capability of several replicating compounds was investigated. Additionally, the residue remaining on material surfaces upon removal of replicas was quantified. Cleaning practices were tested for several different replicating compounds. For all replicating compounds investigated, a thin silicone residue was left by the replica. For some compounds, additional inorganic species could be identified in the residue. Simple solvent cleaning could removemore » some residue.« less

Prevalence and risk factors for odontoclastic resorptive lesions in cats.

PubMed

Lund, E M; Bohacek, L K; Dahlke, J L; King, V L; Kramek, B A; Logan, E I

1998-02-01

To determine prevalence of, and risk factors for, odontoclastic resorptive lesions in cats seen in a private veterinary practice population. Population-based cross-sectional study. 145 cats more than 1 year of age that underwent anesthesia for various procedures. Cats were evaluated under anesthesia for odontoclastic resorptive lesions. Lesions were graded, using a published classification system. Clients completed a standardized survey on signalment, indoor-outdoor status, medications, diet during the past year, number of daily feedings, treat feeding, source of water, and oral hygiene practices. 48% of cats had resorptive lesions. Lesions were most commonly mandibular, and premolars were more often affected. Compared with cats without oral lesions, cats with oral lesions were more likely to be older, female, taking medications, drinking city (vs well) water, and playing less often with toys. In addition, cats without oral lesions were more likely to have owners who cleaned their teeth daily or twice a week and to be fed diets with higher magnesium, calcium, phosphorus, and potassium contents. Frequency of teeth cleaning was inversely related to the development of odontoclastic resorptive lesions. Variables significantly associated with oral lesions were age and magnesium content of diet. Older cats should be examined closely for odontoclastic resorptive lesions. Clients should be advised on methods and frequency of teeth cleaning in cats to prevent lesions. Dietary nutrients may play a role in the development of odontoclastic resorptive lesions in cats.

Surface Cleaning and Disinfection: Efficacy Assessment of Four Chlorine Types Using Escherichia coli and the Ebola Surrogate Phi6.

PubMed

Gallandat, Karin; Wolfe, Marlene K; Lantagne, Daniele

2017-04-18

In the 2014 West African Ebola outbreak, international organizations provided conflicting recommendations for disinfecting surfaces contaminated by uncontrolled patient spills. We compared the efficacy of four chlorine solutions (sodium hypochlorite, sodium dichloroisocyanurate, high-test hypochlorite, and generated hypochlorite) for disinfection of three surface types (stainless steel, heavy-duty tarp, and nitrile) with and without pre-cleaning practices (prewiping, covering, or both) and soil load. The test organisms were Escherichia coli and the Ebola surrogate Phi6. All tests achieved a minimum of 5.9 and 3.1 log removal in E. coli and Phi6, respectively. A 15 min exposure to 0.5% chlorine was sufficient to ensure <8 Phi6 plaque-forming unit (PFU)/cm 2 in all tests. While chlorine types were equally efficacious with and without soil load, variation was seen by surface type. Wiping did not increase disinfection efficacy and is not recommended because it generates infectious waste. Covering spills decreased disinfection efficacy against E. coli on heavy-duty tarp but does prevent splashing, which is critical in Ebola contexts. Our results support the recommendation of a 15 min exposure to 0.5% chlorine, independently of chlorine type, surface, pre-cleaning practices, and organic matter, as an efficacious measure to interrupt disease transmission from uncontrolled spills in Ebola outbreaks.

Effect of Acute Ozone Induced Airway Inflammation on Human Sympathetic Nerve Traffic: A Randomized, Placebo Controlled, Crossover Study

PubMed Central

Tank, Jens; Biller, Heike; Heusser, Karsten; Holz, Olaf; Diedrich, André; Framke, Theodor; Koch, Armin; Grosshennig, Anika; Koch, Wolfgang; Krug, Norbert; Jordan, Jens; Hohlfeld, Jens M.

2011-01-01

Background Ozone concentrations in ambient air are related to cardiopulmonary perturbations in the aging population. Increased central sympathetic nerve activity induced by local airway inflammation may be one possible mechanism. Methodology/Principal Findings To elucidate this issue further, we performed a randomized, double-blind, cross-over study, including 14 healthy subjects (3 females, age 22–47 years), who underwent a 3 h exposure with intermittent exercise to either ozone (250 ppb) or clean air. Induced sputum was collected 3 h after exposure. Nineteen to 22 hours after exposure, we recorded ECG, finger blood pressure, brachial blood pressure, respiration, cardiac output, and muscle sympathetic nerve activity (MSNA) at rest, during deep breathing, maximum-inspiratory breath hold, and a Valsalva maneuver. While the ozone exposure induced the expected airway inflammation, as indicated by a significant increase in sputum neutrophils, we did not detect a significant estimated treatment effect adjusted for period on cardiovascular measurements. Resting heart rate (clean air: 59±2, ozone 60±2 bpm), blood pressure (clean air: 121±3/71±2 mmHg; ozone: 121±2/71±2 mmHg), cardiac output (clean air: 7.42±0.29 mmHg; ozone: 7.98±0.60 l/min), and plasma norepinephrine levels (clean air: 213±21 pg/ml; ozone: 202±16 pg/ml), were similar on both study days. No difference of resting MSNA was observed between ozone and air exposure (air: 23±2, ozone: 23±2 bursts/min). Maximum MSNA obtained at the end of apnea (air: 44±4, ozone: 48±4 bursts/min) and during the phase II of the Valsalva maneuver (air: 64±5, ozone: 57±6 bursts/min) was similar. Conclusions/Significance Our study suggests that acute ozone-induced airway inflammation does not increase resting sympathetic nerve traffic in healthy subjects, an observation that is relevant for environmental health. However, we can not exclude that chronic airway inflammation may contribute to sympathetic activation. PMID:21494635

KSC-2013-3143

NASA Image and Video Library

2013-07-26

CAPE CANAVERAL, Fla. – The Orion crew module for Exploration Flight Test 1 sits inside a clean room processing cell in the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. Orion is the exploration spacecraft designed to carry crews to space beyond low Earth orbit. It will provide emergency abort capability, sustain the crew during the space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on a Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Jim Grossmann

KSC-2013-3142

NASA Image and Video Library

2013-07-26

CAPE CANAVERAL, Fla. – The Orion crew module for Exploration Flight Test 1 sits inside a clean room processing cell in the Operations and Checkout Building high bay at NASA’s Kennedy Space Center in Florida. Orion is the exploration spacecraft designed to carry crews to space beyond low Earth orbit. It will provide emergency abort capability, sustain the crew during the space travel and provide safe re-entry from deep space return velocities. The first unpiloted test flight of the Orion is scheduled to launch in 2014 atop a Delta IV rocket and in 2017 on a Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Jim Grossmann

Harnessing methane

NASA Astrophysics Data System (ADS)

Showstack, Randy

The total methane resource in hydrates—ice-like substances found in deep ocean sediments and Arctic permafrost—exceeds the energy content of all other fossil fuel resources,such as coal, oil, and conventional gas, according to the U.S. Geological Survey (USGS).The Methane Hydrate Research and Development Act, signed into law by U.S. President Bill Clinton on May 3, establishes a new federal commitment to developing methane hydrates, which has been touted as a potentially clean energy source that could make the U.S. less dependent on foreign sources of energy. The bill authorizes $47.5 million over five years for the Department of Energy to establish a federal methane hydrate research and development program.

KSC-2011-6162

NASA Image and Video Library

2011-08-03

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the flame trench remains at Launch Pad 39B after the pad's deconstruction. The trench is 450 feet long, 58 feet wide and 42 feet deep with an inner inverted V-shaped steel flame deflector. In 2009, the structure at the pad was no longer needed for NASA's Space Shuttle Program, so it is being restructured for future use. The new design will feature a "clean pad" for rockets to come with their own launcher, making it more versatile for a number of vehicles. For information on NASA's future plans, visit http://www.nasa.gov/exploration. Photo credit: NASA/Kim Shiflett

KSC-2011-6161

NASA Image and Video Library

2011-08-03

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the flame trench remains at Launch Pad 39B after the pad's deconstruction. The trench is 450 feet long, 58 feet wide and 42 feet deep with an inner inverted V-shaped steel flame deflector. In 2009, the structure at the pad was no longer needed for NASA's Space Shuttle Program, so it is being restructured for future use. The new design will feature a "clean pad" for rockets to come with their own launcher, making it more versatile for a number of vehicles. For information on NASA's future plans, visit http://www.nasa.gov/exploration. Photo credit: NASA/Kim Shiflett

Defense Manpower Commission Staff Studies and Supporting Papers. Volume 2. The Total Force and Its Manpower Requirements Including Overviews of Each Service

DTIC Science & Technology

1976-05-01

J^^’.Si*!** \\ ir..’’T^-.’-T*TSfn titoa i iMBi’M, OTTŕ" ,^~" fraCk k^«^;-<^»J,..;^.a,L.^t»^^ri^fc ft WBMyLmH’.’JW*^Hi,.J , Jl,l|llliln|Kli|Pffl...also develop a means to inspect tube internals to insure they are clean 11. Develop a deep tank, high volume, high head hydraulic driven pump to...and procedures that have been implemented at this Command and havs en- hanced productivity are: - Power floor cleaners Pneumatic/ hydraulic ram tire

Quark charge retention in final state hadrons from deep inelastic muon scattering

NASA Astrophysics Data System (ADS)

Albanese, J. P.; Arneodo, M.; Arvidson, A.; Aubert, J. J.; Becks, K. H.; Bee, C.; Benchouk, C.; Bird, I.; Blum, D.; Böhm, E.; de Bouard, X.; Brasse, F. W.; Braun, H.; Broll, C.; Brown, S.; Brück, H.; Calen, H.; Callebaut, D.; Carr, J.; Chima, J. S.; Clifft, R.; Cobb, J. H.; Coignet, G.; Combley, F.; Coughlan, J.; Court, G. R.; D'Agostini, G.; Dahlgren, S.; Davies, J. K.; Dau, W. D.; Dengler, F.; Derado, I.; Dobinson, R. W.; Dosselli, U.; Dreyer, T.; Drees, J.; Dumont, J. J.; Düren, M.; Eckardt, V.; Edwards, A.; Edwards, M.; Ernst, T.; Eszes, G.; Favier, J.; Ferrero, M. I.; Figiel, J.; Flauger, W.; Foster, J.; Gabathuler, E.; Gamet, R.; Gayler, J.; Geddes, N.; Giubellino, P.; Gössling, C.; Grafström, P.; Grard, F.; Gustafsson, L.; Haas, J.; Hagberg, E.; Hasert, F. J.; Hayman, P.; Heusse, P.; Hoppe, C.; Jaffré, M.; Jachołkowska, A.; Janata, F.; Jancso, G.; Johnson, A. S.; Kabuss, E. M.; Kellner, G.; Korbel, V.; Krüger, J.; Kullander, S.; Landgraf, U.; Lanske, D.; Loken, J.; Long, K.; Maire, M.; Manz, A.; Mohr, W.; Montanet, F.; Montgomery, H. E.; Mount, R. P.; Nagy, E.; Nassalski, J.; Norton, P. R.; Oakham, F. G.; Osborne, A. M.; Pascaud, C.; Paul, L.; Payre, P.; Peroni, C.; Pessard, H.; Pettingale, J.; Pönsgen, B.; Pötsch, M.; Preissner, H.; Renton, P.; Ribarics, P.; Rith, K.; Rondio, E.; Schlagböhmer, A.; Schmitz, N.; Schneegans, M.; Schröder, T.; Schultze, K.; Shiers, J.; Sloan, T.; Stier, H. E.; Stockhausen, W.; Studt, M.; Taylor, G.; Thénard, J. M.; Thompson, J. C.; de la Torre, A.; Toth, J.; Urban, L.; Wahlen, H.; Wallucks, W.; Whalley, M.; Williams, W. S. C.; Wheeler, S.; Wimpenny, S.; Windmolders, R.; Wolf, G.; Zank, P.; European Muon Collaboration

1984-08-01

The net charge of final state hadrons in both the current and target fragmentation regions has been measured in 280 GeV/ c muon-proton scattering experiment. A clean kinematic separation of the two regions in the centre-of-mass rapidity is demonstrated. The dependence on xBj of the mean net charges is found to be consistent with a large contribution of sea quarks at small xBj and with the dominance of valence quarks at large xBj thus giving clear confirmation of the quarck- parton model. It is also shown that the lending forward hadron has a high probability of containing the struck quark.

Clean Plate Movement and Empowerment of Civil Leadership for Developing Sustainable Life Style

NASA Astrophysics Data System (ADS)

Choi, Kwang Soo; Kim, Seung Woo; Jung, Sin Yeong; Choi, Byeong Dae; Mun, Sung Joo; Lee, Dong Ho

This paper describes the backgrounds, process, outcomes, and characteristics of "Clean plate" movement carried out in Korea. That was aimed at the reduction of food waste production as well as developing and disseminating a sustainable life style. Excessive foods are wasted every year in Korea and it reaches to 270 g/day/capita. Clean plate movement was started 2004 and over 1.5 million peoples, which is 3% of the population, did pledge for 15 months. Over one million students participated in the pledge campaign and they became conscious about the importance of food and get sustainable eating habit in which they don't leave any food behind. While the campaign carried out successfully, civil volunteers of a Buddhist NGO EcoBuddha, who were the housewives mainly, were in charge of the whole processes and were trained as civil leaders for sustainable development. They awakened to the interrelationship between human being and the nature, based on a series of Buddhist lectures and self practicing asceticism. Clean plate movement as an educational program for sustainable development has various factors in three pillars of environmental, economical and socio-cultural aspects for EfSD.

Radiation shielding for deep space manned missions by cryogen free superconducting magnets.

NASA Astrophysics Data System (ADS)

Spillantini, Piero

In last years some activity was dedicated to the solution of the following problem: can be artificially created, around a space vehicle in a manned interplanetary travel or around a manned `space base' in deep space, a magnetic field approaching as much as possible the terrestrial one in terms of bending power on the arriving particles? Preliminary evaluations for active shielding based on superconducting magnets were made a few years ago in ESA supported studies. The present increasing interest of permanent space `bases' located in `deep' space requires that this activity continue toward the goal of protecting from Galactic Cosmic Ray (GCR) a large volume `habitat', allowing long duration permanence in space to citizens conducting there `normal' activities besides to a restricted number of astronauts. The problem had to be stated at this global scale because it must be afforded as soon as possible for preparing the needed technologies and their integration in the spacecraft designs for the future manned exploration and for inhabitation of deep space. The realization of the magnetic protection of large volume habitats by well-established nowadays materials and techniques is in principle possible, but not workable in practice for the huge required mass of the superconductor, the too low operating temperature (10K) and the corresponding required cooling power and thermal shielding. The concept of Cryogen Free Superconducting Magnets is the only one practicable. Fast progress in the production of reliable High Temperature Superconducting (HTS) or MgB2 cables and of cryocoolers suitable for space operation opens the perspective of practicable solutions. Quantitative evaluations for the protection of large volume habitats in deep space from GCRs are reported and discussed.

Higher theta and alpha1 coherence when listening to Vedic recitation compared to coherence during Transcendental Meditation practice.

PubMed

Travis, Frederick; Parim, Niyazi; Shrivastava, Amrita

2017-03-01

This study compared subjective experiences and EEG patterns in 37 subjects when listening to live Vedic recitation and when practicing Transcendental Meditation (TM). Content analysis of experiences when listening to Vedic recitation yielded three higher-order code. Experiences during Vedic recitation were: (1) deeper than during TM practice; (2) experienced as an inner process; and (3) characterized by lively silence. EEG patterns support these higher-order codes. Theta2 and alpha1 frontal, parietal, and frontal-parietal coherence were significantly higher when listening to Vedic recitation, than during TM practice. Theta2 coherence is seen when attending to internal mental processes. Higher theta2 coherence supports subjects' descriptions that the Vedic recitations were "not external sounds but internal vibrations." Alpha1 coherence is reported during pure consciousness experiences during TM practice. Higher alpha1 coherence supports subjects' descriptions that they "experienced a depth of experience, rarely experienced even during deep TM practice." These data support the utility of listening to Vedic recitation to culture deep inner experiences. Copyright © 2017 Elsevier Inc. All rights reserved.

Compensatory mitigation for streams under the Clean Water Act: reassessing science and redirecting policy

USDA-ARS?s Scientific Manuscript database

Considerable public funds are annually expended on stream restoration projects, but available science suggests that stream restoration as currently practiced is not effective in recovering ecosystem functional integrity. The physical scale of most stream restoration projects is insufficient because...

Alternative Fuels Data Center

Science.gov Websites

Carbon Reduction Procurement Policies The Vermont Agency of Administration and the Climate Cabinet must revise state acquisition policies to ensure consideration of vendor business practices that promote clean energy and address climate change. Policies should consider, for example, the use of and

40 CFR 63.468 - Reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... brief description of each solvent cleaning machine including machine type (batch vapor, batch cold... construction or reconstruction had commenced and initial startup had not occurred before December 2, 1994, shall submit this report as soon as practicable before startup but no later than January 31, 1995. New...

40 CFR 63.468 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... brief description of each solvent cleaning machine including machine type (batch vapor, batch cold... construction or reconstruction had commenced and initial startup had not occurred before December 2, 1994, shall submit this report as soon as practicable before startup but no later than January 31, 1995. New...

40 CFR 63.468 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... brief description of each solvent cleaning machine including machine type (batch vapor, batch cold... construction or reconstruction had commenced and initial startup had not occurred before December 2, 1994, shall submit this report as soon as practicable before startup but no later than January 31, 1995. New...

40 CFR 63.468 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... brief description of each solvent cleaning machine including machine type (batch vapor, batch cold... construction or reconstruction had commenced and initial startup had not occurred before December 2, 1994, shall submit this report as soon as practicable before startup but no later than January 31, 1995. New...

Design criteria monograph for valve components

NASA Technical Reports Server (NTRS)

1974-01-01

Monograph treats valve design technology problems as they were solved in successful development of flightweight operational valves for liquid rocket systems. General practices for cleaning and contamination prevention are summarized. Balance of information is arranged by topic, since detail design requirements apply to most types of valves.

Air, water, and surface bacterial contamination in a university-hospital autopsy room.

PubMed

Maujean, Géraldine; Malicier, Daniel; Fanton, Laurent

2012-03-01

Today, little is known about the bacteriological environment of the autopsy room and its potential interest for medico-legal practices. Seven hundred fifty microbiological samples were taken from surface (n = 660), air (n = 48), and water (n = 42) to evaluate it in a French University Forensic Department. Median bacterial counts were compared before and during autopsy for air samples, and before and after autopsy for surface samples, using Wilcoxon matched pairs signed ranks test. Bacterial identification relied on traditional phenotypic methods. Bacterial counts in the air were low before autopsy, increased significantly during procedure, and seemed more linked to the number of people in the room than to an important production of aerosol-containing bacteria. Despite cleaning, human fecal flora was omnipresent on surfaces, which revealed insufficient disinfection. Bacteriological sampling is an easy way to monitor cleaning practices in postmortem rooms, but chiefly a way to improve the reliability of medico-legal proofs of infectious deaths. © 2012 American Academy of Forensic Sciences.

A Tool for Adopting a Different Perspective on Classroom Observation and Feedback on Science Lessons

ERIC Educational Resources Information Center

Haynes, Lyn

2014-01-01

This article outlines the development of a tool designed to take forward the practice of science teachers through subject-specific guidance and discourse that promotes dialogue and deep critical reflection on practice.

Deep-turbulence wavefront sensing using digital holography in the on-axis phase shifting recording geometry

NASA Astrophysics Data System (ADS)

Thornton, Douglas E.; Spencer, Mark F.; Perram, Glen P.

2017-09-01

The effects of deep turbulence in long-range imaging applications presents unique challenges to properly measure and correct for aberrations incurred along the atmospheric path. In practice, digital holography can detect the path-integrated wavefront distortions caused by deep turbulence, and di erent recording geometries offer different benefits depending on the application of interest. Previous studies have evaluated the performance of the off-axis image and pupil plane recording geometries for deep-turbulence sensing. This study models digital holography in the on-axis phase shifting recording geometry using wave optics simulations. In particular, the analysis models spherical-wave propagation through varying deep-turbulence conditions to estimate the complex optical field, and performance is evaluated by calculating the field-estimated Strehl ratio and RMS wavefront error. Altogether, the results show that digital holography in the on-axis phase shifting recording geometry is an effective wavefront-sensing method in the presence of deep turbulence.

High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor With Results from FY-2011 Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael A. Pope

2011-10-01

The Deep Burn (DB) Project is a U.S. Department of Energy sponsored feasibility study of Transuranic Management using high burnup fuel in the high temperature helium cooled reactor (HTR). The DB Project consists of seven tasks: project management, core and fuel analysis, spent fuel management, fuel cycle integration, TRU fuel modeling, TRU fuel qualification, and HTR fuel recycle. In the Phase II of the Project, we conducted nuclear analysis of TRU destruction/utilization in the HTR prismatic block design (Task 2.1), deep burn fuel/TRISO microanalysis (Task 2.3), and synergy with fast reactors (Task 4.2). The Task 2.1 covers the core physicsmore » design, thermo-hydraulic CFD analysis, and the thermofluid and safety analysis (low pressure conduction cooling, LPCC) of the HTR prismatic block design. The Task 2.3 covers the analysis of the structural behavior of TRISO fuel containing TRU at very high burnup level, i.e. exceeding 50% of FIMA. The Task 4.2 includes the self-cleaning HTR based on recycle of HTR-generated TRU in the same HTR. Chapter IV contains the design and analysis results of the 600MWth DB-HTR core physics with the cycle length, the average discharged burnup, heavy metal and plutonium consumptions, radial and axial power distributions, temperature reactivity coefficients. Also, it contains the analysis results of the 450MWth DB-HTR core physics and the analysis of the decay heat of a TRU loaded DB-HTR core. The evaluation of the hot spot fuel temperature of the fuel block in the DB-HTR (Deep-Burn High Temperature Reactor) core under full operating power conditions are described in Chapter V. The investigated designs are the 600MWth and 460MWth DB-HTRs. In Chapter VI, the thermo-fluid and safety of the 600MWth DB-HTRs has been analyzed to investigate a thermal-fluid design performance at the steady state and a passive safety performance during an LPCC event. Chapter VII describes the analysis results of the TRISO fuel microanalysis of the 600MWth and 450MWth DB-HTRs. The TRISO fuel microanalysis covers the gas pressure buildup in a coated fuel particle including helium production, the thermo-mechanical behavior of a CFP, the failure probabilities of CFPs, the temperature distribution in a CPF, and the fission product (FP) transport in a CFP and a graphite. In Chapter VIII, it contains the core design and analysis of sodium cooled fast reactor (SFR) with deep burn HTR reactor. It considers a synergistic combination of the DB-MHR and an SFR burner for a safe and efficient transmutation of the TRUs from LWRs. Chapter IX describes the design and analysis results of the self-cleaning (or self-recycling) HTR core. The analysis is considered zero and 5-year cooling time of the spent LWR fuels.« less

High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Francesco Venneri; Chang-Keun Jo; Jae-Man Noh

2010-09-01

The Deep Burn (DB) Project is a U.S. Department of Energy sponsored feasibility study of Transuranic Management using high burnup fuel in the high temperature helium cooled reactor (HTR). The DB Project consists of seven tasks: project management, core and fuel analysis, spent fuel management, fuel cycle integration, TRU fuel modeling, TRU fuel qualification, and HTR fuel recycle. In the Phase II of the Project, we conducted nuclear analysis of TRU destruction/utilization in the HTR prismatic block design (Task 2.1), deep burn fuel/TRISO microanalysis (Task 2.3), and synergy with fast reactors (Task 4.2). The Task 2.1 covers the core physicsmore » design, thermo-hydraulic CFD analysis, and the thermofluid and safety analysis (low pressure conduction cooling, LPCC) of the HTR prismatic block design. The Task 2.3 covers the analysis of the structural behavior of TRISO fuel containing TRU at very high burnup level, i.e. exceeding 50% of FIMA. The Task 4.2 includes the self-cleaning HTR based on recycle of HTR-generated TRU in the same HTR. Chapter IV contains the design and analysis results of the 600MWth DB-HTR core physics with the cycle length, the average discharged burnup, heavy metal and plutonium consumptions, radial and axial power distributions, temperature reactivity coefficients. Also, it contains the analysis results of the 450MWth DB-HTR core physics and the analysis of the decay heat of a TRU loaded DB-HTR core. The evaluation of the hot spot fuel temperature of the fuel block in the DB-HTR (Deep-Burn High Temperature Reactor) core under full operating power conditions are described in Chapter V. The investigated designs are the 600MWth and 460MWth DB-HTRs. In Chapter VI, the thermo-fluid and safety of the 600MWth DB-HTRs has been analyzed to investigate a thermal-fluid design performance at the steady state and a passive safety performance during an LPCC event. Chapter VII describes the analysis results of the TRISO fuel microanalysis of the 600MWth and 450MWth DB-HTRs. The TRISO fuel microanalysis covers the gas pressure buildup in a coated fuel particle including helium production, the thermo-mechanical behavior of a CFP, the failure probabilities of CFPs, the temperature distribution in a CPF, and the fission product (FP) transport in a CFP and a graphite. In Chapter VIII, it contains the core design and analysis of sodium cooled fast reactor (SFR) with deep burn HTR reactor. It considers a synergistic combination of the DB-MHR and an SFR burner for a safe and efficient transmutation of the TRUs from LWRs. Chapter IX describes the design and analysis results of the self-cleaning (or self-recycling) HTR core. The analysis is considered zero and 5-year cooling time of the spent LWR fuels.« less

[End-of-life debate: Citizen's point of view about deep and continuous sedation].

PubMed

Toporski, J; Jonveaux-Rivasseau, T; Lamouille-Chevalier, C

2017-12-01

Sedation in palliative care meets a precise definition and corresponds to a medical practice. We assessed the comprehension of this practice by the French population. In 2015, citizen expressed their views on the Claeys-Leonetti bill by means of a consultative forum made available on the Internet site of the National Assembly. The content of the messages filed, regarding the right to deep and continuous sedation until death was analyzed using the ALCESTE textual data analysis software, supplemented by a thematic analysis in order to identify the perception that Internet users had of this practice. Among the 1819 Internet users who participated in the forum, 67 expressed their views as Health professionals, 25 of whom were directly involved in palliative care, as well as 10 sick persons. Analysis with the ALCESTE software highlighted two classes of statements. The first dealing with deep and continuous sedation, reflecting the specificity of the discourse of the Internet users. The second one consisted of textual units in which the modal verbs were dominant and overrepresented, thus providing information on the participants' perceptions. The thematic analysis highlighted four themes: death, intent, treatment and fear. Deep and continuous sedation is perceived as a euthanasic practice or raises fear of such a drift. Provision of extended and accurate information to the population and health professionals is essential to ensure that this new model of sedation is integrated into the care of the terminally ill patients and their families. Copyright © 2017 Société Nationale Française de Médecine Interne (SNFMI). Published by Elsevier SAS. All rights reserved.

Detection of Organic Matter in Greenland Ice Cores by Deep-UV Fluorescence

NASA Astrophysics Data System (ADS)

Willis, M.; Malaska, M.; Wanger, G.; Bhartia, R.; Eshelman, E.; Abbey, W.; Priscu, J. C.

2017-12-01

The Greenland Ice Sheet is an Earthly analog for icy ocean worlds in the outer Solar System. Future missions to such worlds including Europa, Enceladus, and Titan may potentially include spectroscopic instrumentation to examine the surface/subsurface. The primary goal of our research is to test deep UV/Raman systems for in the situ detection and localization of organics in ice. As part of this effort we used a deep-UV fluorescence instrument able to detect naturally fluorescent biological materials such as aromatic molecules found in proteins and whole cells. We correlated these data with more traditional downstream analyses of organic material in natural ices. Supraglacial ice cores (2-4 m) were collected from several sites on the southwest outlet of the Greenland Ice Sheet using a 14-cm fluid-free mechanical coring system. Repeat spectral mapping data were initially collected longitudinally on uncut core sections. Cores were then cut into 2 cm thick sections along the longitudinal axis, slowly melted and analyzed for total organic carbon (TOC), total dissolved nitrogen (TDN), and bacterial density. These data reveal a spatial correlation between organic matter concentration, cell density, and the deep UV fluorescence maps. Our results provide a profile of the organics embedded within the ice from the top surface into the glacial subsurface, and the TOC:TDN data from the clean interior of the cores are indicative of a biological origin. This work provides a background dataset for future work to characterize organic carbon in the Greenland Ice Sheet and validation of novel instrumentation for in situ data collection on icy bodies.

[The distribution of microorganisms in household kitchens. II. Evaluation of results and hygienic inferences].

PubMed

Borneff, J; Hassinger, R; Wittig, J; Edenharder, R

1988-03-01

The very high morbidity rates of Enteritis infectiosa diseases demand improved prophylactic measures. An important indication of the source of these illnesses is the fact that infections in private households are about three times more frequent than in canteens. Indeed, the rise in morbidity is undoubtedly caused by inadequate treatment of raw products, of meal rests and by insufficient heating processes. Furthermore, in household kitchens no efforts are made to interrupt infection chains, and disinfections are considered as superfluous and housewives are content if their kitchens appear to be clean. The aim of our study performed in a normal household kitchen, was to investigate cross-contamination caused by pathogens, introduced into the kitchen from outdoors. A further aim was to establish the main sources of contamination in order to be able to recommend practical disinfection procedures. The main fields of contamination discovered when 55 meals prepared were: a) working surfaces (including boards of wood and plastics) b) kitchen- and cutting-machines. The amount of test organisms (Sarcinae), introduced into the kitchen (unbeknown to the housewives) by experimentally contaminated minced meat was only reduced by common cleaning procedures, in sofar as nearly half of the original contaminations could be demonstrated to be still present. However, when the normal cleanser was replaced by one containing hypochlorite, and with retention of the same working routines, about 90% bacteriologically clean surfaces were determined. In this way it could be demonstrated that infection chains can be interrupted. It is, however, not correct to compare the efficiency of these procedures with the efficiency of disinfection, according to the Federal Infectious Diseases Act (Bundesseuchengesetz). On practical application of these experiences it must be borne in mind that housewives should not be forced to apply medical disinfection procedures: indeed, traditional and practised cleaning methods should be retained, as far as possible. We recommend therefore that manufacturers supply household cleansers with an anti-bacterial additive, after its application in the kitchens working surfaces and machines are bacteriologically clean. Additionally housewives should be appropriately informed about the necessity of these manipulations. We consider minimization of toxicity and a thorough environmental compatibility of formulations to be self-evident.

Worst error performance of continuous Kalman filters. [for deep space navigation and maneuvers

NASA Technical Reports Server (NTRS)

Nishimura, T.

1975-01-01

The worst error performance of estimation filters is investigated for continuous systems in this paper. The pathological performance study, without assuming any dynamical model such as Markov processes for perturbations, except for its bounded amplitude, will give practical and dependable criteria in establishing the navigation and maneuver strategy in deep space missions.

Numerical simulation of phenomenon on zonal disintegration in deep underground mining in case of unsupported roadway

NASA Astrophysics Data System (ADS)

Han, Fengshan; Wu, Xinli; Li, Xia; Zhu, Dekang

2018-02-01

Zonal disintegration phenomenon was found in deep mining roadway surrounding rock. It seriously affects the safety of mining and underground engineering and it may lead to the occurrence of natural disasters. in deep mining roadway surrounding rock, tectonic stress in deep mining roadway rock mass, horizontal stress is much greater than the vertical stress, When the direction of maximum principal stress is parallel to the axis of the roadway in deep mining, this is the main reasons for Zonal disintegration phenomenon. Using ABAQUS software to numerical simulation of the three-dimensional model of roadway rupture formation process systematically, and the study shows that when The Direction of maximum main stress in deep underground mining is along the roadway axial direction, Zonal disintegration phenomenon in deep underground mining is successfully reproduced by our numerical simulation..numerical simulation shows that using ABAQUA simulation can reproduce Zonal disintegration phenomenon and the formation process of damage of surrounding rock can be reproduced. which have important engineering practical significance.

The National Shipbuilding Research Program. Document Technologies Available to Clean Brackish Waters to 50 PPT TBT Levels

DTIC Science & Technology

1997-12-01

State-of-The-Practice Treatment Technologies For Reducing Concentrations of O rganotin Compounds in Wastewater Executive Summary The purpose of this...study is to identify practical technology that can be used by shipyards to remove tributyltin (TBT) from large volumes of water to levels below 50 parts... water treatment technologies that may be effective in reducing TBT concentrations in waste streams, these technologies have not been applied to shipyard

Leverage technology to improve your revenue cycle.

PubMed

Larch, Sara M

2012-01-01

Evaluating technology and implementing it effectively can produce major results to your bottom line. These technologies increase automation, which reduces errors and thus increases the clean claim percentage. New technology can enable the medical practice to reduce staff costs through increased productivity. Adding technology can offer medical practices new ways to run their business. Continue to learn about new technologies and the vendors and companies that offer them. Leverage technology in ways to get more money to the bottom line!

Effectiveness of Current Practices for Disinfecting Medical Equipment in a Radiology Department.

PubMed

Hubble, William L; Turner, James Austin; Heuertz, Rita

2016-01-01

To evaluate the effectiveness of routine, daily disinfection practices on the control of microorganisms on nuclear medicine equipment in a radiology department. During phase 1, surface samples were collected from various sites in the nuclear medicine division of a radiology department at a single institution. These samples were transferred onto growth plates for evaluation and speciation by a clinical microbiologist. Collection sites that yielded potentially pathogenic bacteria or high numbers (> 100) of colonies of likely nonpathogenic bacteria were identified for resampling. During phase 2, secondary samples were taken at the resampling sites after disinfection. These secondary samples also were evaluated to determine the efficacy of the departmental disinfection practices on surface cleanliness. Phase 1 sampling identified 10 sites that harbored either potentially pathogenic bacteria or high numbers of likely nonpathogenic bacteria. Evaluation of postdisinfection samples indicated elimination of potentially pathogenic bacteria and reduction of likely nonpathogenic colonies. The variety of surfaces and equipment found in radiology departments can present unique challenges for effective disinfection. Porous materials and intricate imaging and peripheral devices require special consideration when designing and maintaining department cleaning policies. The disinfection practices in place at the institution were effective in reducing or eliminating bacteria; however, recolonization after cleaning was recognized as a possibility. Educating staff about the value of disinfecting contact surfaces between patients is necessary to achieve optimum sanitization in the radiology department. © 2016 American Society of Radiologic Technologists.

High-Impact Practices and the First-Year Student

ERIC Educational Resources Information Center

Tukibayeva, Malika; Gonyea, Robert M.

2014-01-01

High-impact practices, programs, and activities where students commit considerable time and effort in different settings can help to define the first-year college experience and are likely to increase success in areas like persistence, deep learning, and self-reported gains.

Deep learning in bioinformatics.

PubMed

Min, Seonwoo; Lee, Byunghan; Yoon, Sungroh

2017-09-01

In the era of big data, transformation of biomedical big data into valuable knowledge has been one of the most important challenges in bioinformatics. Deep learning has advanced rapidly since the early 2000s and now demonstrates state-of-the-art performance in various fields. Accordingly, application of deep learning in bioinformatics to gain insight from data has been emphasized in both academia and industry. Here, we review deep learning in bioinformatics, presenting examples of current research. To provide a useful and comprehensive perspective, we categorize research both by the bioinformatics domain (i.e. omics, biomedical imaging, biomedical signal processing) and deep learning architecture (i.e. deep neural networks, convolutional neural networks, recurrent neural networks, emergent architectures) and present brief descriptions of each study. Additionally, we discuss theoretical and practical issues of deep learning in bioinformatics and suggest future research directions. We believe that this review will provide valuable insights and serve as a starting point for researchers to apply deep learning approaches in their bioinformatics studies. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Neurophysiological study on the effect of various short durations of deep breathing: A randomized controlled trial.

PubMed

Cheng, Kok Suen; Han, Ray P S; Lee, Poh Foong

2018-02-01

The study aims to study the effects of short duration deep breathing on the EEG power with topography based on parallel group randomized controlled trial design which was lacking in prior reports. 50 participants were split into 4 groups: control (CONT), deep breathing (DB) for 5 (DB5), 7 (DB7), and 9 (DB9) minutes. EEG recordings were obtained during baseline, deep breathing session, after deep breathing, and a follow-up session after 7 days of consecutive practice. Frontal theta power of DB5 and DB9 was significantly larger than that of CONT after the deep breathing session (p = 0.027 and p = 0.006, respectively) and the profound finding showed that the theta topography obtained a central-focused distribution for DB7 and DB9. The result obtained was consistent with previous literature, albeit for certain deep breathing durations only, indicating a possible linkage between the deep breathing duration and the neurophysiology of the brain. Copyright © 2017 Elsevier B.V. All rights reserved.

21 CFR 111.16 - What are the requirements under this subpart C for written procedures?

Code of Federal Regulations, 2010 CFR

2010-04-01

... HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Physical Plant and Grounds... follow written procedures for cleaning the physical plant and for pest control. ...

21 CFR 111.16 - What are the requirements under this subpart C for written procedures?

Code of Federal Regulations, 2011 CFR

2011-04-01

... HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Physical Plant and Grounds... follow written procedures for cleaning the physical plant and for pest control. ...

Clean air program : design guidelines for bus transit systems using compressed natural gas as an alternative fuel

DOT National Transportation Integrated Search

1996-06-01

This report documents design guidelines for the safe use of Compressed Natural Gas (CNG). The report is designed to provide guidance, information on safe industry practices, applicable national codes and standards, and reference data that transit age...

What to Do if a Compact Fluorescent Light (CFL) Bulb or Fluorescent Tube Light Bulb Breaks: Printable Instructions

EPA Pesticide Factsheets

The broken bulb can continue to release mercury vapor until it is cleaned up and removed. This cleanup guidance represents minimum recommended actions to reduce mercury exposure, and will be updated as more efficient practices are identified.

40 CFR 35.937-7 - Profit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... performance and not merely the application of a predetermined percentage factor. For the purpose of... ASSISTANCE Grants for Construction of Treatment Works-Clean Water Act § 35.937-7 Profit. The objective of negotiations shall be the exercise of sound business judgment and good administrative practice including the...

40 CFR 63.52 - Approval process for new and existing affected sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... affected sources. 63.52 Section 63.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air... emission reductions that can be achieved if the control technologies or work practices are installed...

Trash Ecology

ERIC Educational Resources Information Center

Lind, Georgia J.

2004-01-01

A hands on activity involving density, frequency and biomass using transects, quadrats and a local good deed by cleaning up the neighborhood while practicing important techniques in ecology is detailed. The activity is designed for KCC-STEP, whose primary goal is to expand the scientific knowledge and research experiences of their students, who…

Sean Esterly | NREL

Science.gov Websites

, micro and mini-grid policies and regulations, and international clean energy policy analysis. He has technologies, such as micro- and mini-grids. Strategic energy planning, focusing on both renewable and energy Considerations and Good Practices, NREL Technical Report (2015) Quality Assurance Framework for Mini-Grids, NREL

76 FR 59425 - Notice of Lodging of Consent Decree Under The Clean Air Act

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... and collection systems, to correctly establish and monitor operating parameters, and to comply with... using model test protocols, adopt new monitoring practices, correct deficiencies in recordkeeping and... Environmental Protection Agency, Ariel Rios Building, 1200 Pennsylvania Avenue, NW., Washington, DC 20460...

Health care worker hand hygiene in the pediatric special care unit at Mulago National Referral Hospital in Uganda: a best practice implementation project.

PubMed

Muhumuza, Christine; Gomersall, Judith Streak; Fredrick, Makumbi E; Atuyambe, Lynn; Okiira, Christopher; Mukose, Aggrey; Ssempebwa, John

2015-03-01

The hands of a health care worker are a common vehicle of pathogen transmission in hospital settings. Health care worker hand hygiene is therefore critical for patients' well being. Whilst failure of health care workers to comply with the best hand hygiene practice is a problem in all health care settings, issues of lack of access to adequate cleaning equipment and in some cases even running water make practicing good hand hygiene particularly difficult in low-resource developing country settings. This study reports an audit and feedback project that focused on the hand hygiene of the health care worker in the pediatric special care unit of the Mulago National Referral Hospital, which is a low-resource setting in Uganda. To improve hand hygiene among health care workers in the pediatric special care unit and thereby contribute to reducing transmission of health care worker-associated pathogens. The Joanna Briggs Institute three-phase Practical Application of Clinical Evidence System audit and feedback tool for promoting evidence utilization and change in health care was used. In phase one of the project, stakeholders were engaged and seven evidence-based audit criteria were developed. A baseline audit was then conducted. In phase two, barriers underpinning areas of noncompliance found in the baseline audit were identified and three strategies - education, reminders and provision of hand cleaning equipment - were implemented to overcome them. In phase three, a follow-up audit was conducted. Compliance with best practice hygiene was found to be poor in the baseline audit for all but one of the audit criteria. Following the implementation of the strategies, hand hygiene improved. The compliance rate increased substantially across all criteria. Staff education achieved 100%, whilst criterion 4 increased to 70%. However, use of alcohol-based hand-rub for hand hygiene only improved to 66%, and for six of the seven audit criteria, compliance remained below 74%. The project provides another example of how audit can be used as a tool to improve health practice, even in a low-resource setting. At the same time, it showed how difficult it is to achieve compliance with best hand hygiene practice in a low-resource hospital. The project highlights the importance of continued education/awareness raising on the importance of good hand hygiene practice as well as investment in infrastructure and cleaning supplies for achieving and sustaining good hand hygiene among workers in a low-resource hospital setting. A key contribution of the project was the legacy it left in the form of knowledge about how to use audit and feedback as a tool to promote the best practice. A similar project has been implemented in the maternity ward at the hospital and further audits are planned.

DeepPicker: A deep learning approach for fully automated particle picking in cryo-EM.

PubMed

Wang, Feng; Gong, Huichao; Liu, Gaochao; Li, Meijing; Yan, Chuangye; Xia, Tian; Li, Xueming; Zeng, Jianyang

2016-09-01

Particle picking is a time-consuming step in single-particle analysis and often requires significant interventions from users, which has become a bottleneck for future automated electron cryo-microscopy (cryo-EM). Here we report a deep learning framework, called DeepPicker, to address this problem and fill the current gaps toward a fully automated cryo-EM pipeline. DeepPicker employs a novel cross-molecule training strategy to capture common features of particles from previously-analyzed micrographs, and thus does not require any human intervention during particle picking. Tests on the recently-published cryo-EM data of three complexes have demonstrated that our deep learning based scheme can successfully accomplish the human-level particle picking process and identify a sufficient number of particles that are comparable to those picked manually by human experts. These results indicate that DeepPicker can provide a practically useful tool to significantly reduce the time and manual effort spent in single-particle analysis and thus greatly facilitate high-resolution cryo-EM structure determination. DeepPicker is released as an open-source program, which can be downloaded from https://github.com/nejyeah/DeepPicker-python. Copyright © 2016 Elsevier Inc. All rights reserved.

EEG-based auditory attention decoding using unprocessed binaural signals in reverberant and noisy conditions?

PubMed

Aroudi, Ali; Doclo, Simon

2017-07-01

To decode auditory attention from single-trial EEG recordings in an acoustic scenario with two competing speakers, a least-squares method has been recently proposed. This method however requires the clean speech signals of both the attended and the unattended speaker to be available as reference signals. Since in practice only the binaural signals consisting of a reverberant mixture of both speakers and background noise are available, in this paper we explore the potential of using these (unprocessed) signals as reference signals for decoding auditory attention in different acoustic conditions (anechoic, reverberant, noisy, and reverberant-noisy). In addition, we investigate whether it is possible to use these signals instead of the clean attended speech signal for filter training. The experimental results show that using the unprocessed binaural signals for filter training and for decoding auditory attention is feasible with a relatively large decoding performance, although for most acoustic conditions the decoding performance is significantly lower than when using the clean speech signals.

Evaluation of a modified cleaning procedure in the prevention of carbapenem-resistant Acinetobacter baumannii clonal spread in a burn intensive care unit using a high-sensitivity luminometer.

PubMed

Casini, B; Selvi, C; Cristina, M L; Totaro, M; Costa, A L; Valentini, P; Barnini, S; Baggiani, A; Tagliaferri, E; Privitera, G

2017-01-01

Enhanced environmental cleaning practices are among the most accepted measures for controlling the spread of carbapenem-resistant Acinetobacter baumannii (CR-Ab). To evaluate the impact of heightened cleaning on an ongoing CR-Ab outbreak in a burn intensive care unit (BICU) of an Italian teaching hospital, where chlorhexidine-60% isopropyl alcohol was applied as a complementary disinfectant on high-touch surfaces. Compliance with the microbial limit proposed for the BICU by AFNOR-NF-S90-351 (20 colony-forming units/100cm 2 ) was assessed by plate count, and compared with the results obtained with intracellular adenosine triphosphate (ATP) detection. Genotyping was performed using pulsed-field gel electrophoresis. During the standard cleaning regimen, three out of 23 samples (13%) gave results over the AFNOR limit and five (21.7%) showed unacceptable ATP levels with 100 relative light units/100cm 2 as the benchmark limit (sensibility 86.4%, specificity 92.2%). Following improvement of the cleaning procedure, only two samples out of 50 (4%) did not satisfy the microbiological criteria and seven (14%) exceeded the ATP limit. In a successive phase, eight of 30 samples collected showed unacceptable results (27%). Adding chlorhexidine-60% isopropyl alcohol as complementary disinfectant proved to be effective for reducing environmental microbial contamination, ATP levels and CR-Ab infection/colonization in patients admitted to the BICU. Real-time monitoring by ATP assay was useful for managing the cleaning schedule and reducing hospital infections, although the calculated values must be interpreted as cleanliness indicators rather than risk indicators. Copyright © 2016 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Monitoring the clean-up operation of agricultural fields flooded with red mud in Hungary.

PubMed

Uzinger, Nikolett; Rékási, Márk; Anton, Áron D; Koós, Sándor; László, Péter; Anton, Attila

2016-12-01

In the course of the clean-up operation after the red mud inundation in 2010, red mud was removed from the soil surface in places where the layer was more than 5 cm deep. Before its removal, the red mud seeped into the soil. In 2012, soil samples were taken from depths of 0 to 20 and 20 to 40 cm on some of the affected areas. The parameters investigated were pH, organic matter, salt%, and the total and mobile fractions of various elements. The values recorded in 2012 were compared with those measured immediately after the removal of the red mud in 2010 and with the background and clean-up target concentrations. The pH values remained below the designated limit, while the salt content only exhibited values in the weakly salty range on areas at the greatest distance from the dam. In the central part of the inundated area, total Na contents above the 900 mg/kg target value were observed, but the Na content in the 0-20-cm layer generally exhibited a decrease due to leaching. The pH and As concentration also showed a decline on several areas compared with the values recorded in 2010. Total As and Co contents in excess of the target values were recorded on the lowest-lying part of the flooded area, probably because the finest red mud particles were deposited the furthest from the dam, where they seeped into the soil. Nevertheless, the mobility and plant availability of both elements remained moderate. The total contents of both Co and Mo, however, exhibited a significant rise compared with both the background value and the 2010 data. The monitoring of the cleaned-up areas showed that after a 2-year period element concentrations that exceeded the target values and could be attributed to the red mud pollution were only detectable on the lowest-lying areas.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, D.; Sutherland, K.; Chasar, D.

The U.S. Department of Energy (DOE) Building America program, in collaboration with Florida Power and Light (FPL), conducted a phased residential energy-efficiency retrofit program. This research sought to establish impacts on annual energy and peak energy reductions from the technologies applied at two levels of retrofit - shallow and deep, with savings levels approaching the Building America program goals of reducing whole-house energy use by 40%. Under the Phased Deep Retrofit (PDR) project, we have installed phased, energy-efficiency retrofits in a sample of 56 existing, all-electric homes. End-use savings and economic evaluation results from the phased measure packages and singlemore » measures are summarized in this report. Project results will be of interest to utility program designers, weatherization evaluators, and the housing remodel industry. Shallow retrofits were conducted in all homes from March to June 2013. The measures for this phase were chosen based on ease of installation, targeting lighting (CFLs and LED lamps), domestic hot water (wraps and showerheads), refrigeration (cleaning of coils), pool pump (reduction of operating hours), and the home entertainment center (smart plugs). Deep retrofits were conducted on a subset of ten PDR homes from May 2013 through March 2014. Measures included new air source heat pumps, duct repair, ceiling insulation, heat pump water heaters, variable speed pool pumps and learning thermostats. Major appliances such as refrigerators and dishwashers were replaced where they were old and inefficient.« less

Understanding Water Storage Practices of Urban Residents of an Endemic Dengue Area in Colombia: Perceptions, Rationale and Socio-Demographic Characteristics.

PubMed

García-Betancourt, Tatiana; Higuera-Mendieta, Diana Rocío; González-Uribe, Catalina; Cortés, Sebastian; Quintero, Juliana

2015-01-01

The main preventive measure against dengue virus transmission is often based on actions to control Ae. Aegypti reproduction by targeting water containers of clean and stagnant water. Household water storage has received special attention in prevention strategies but the evidence about the rationale of this human practice is limited. The objective was to identify and describe water storage practices among residents of an urban area in Colombia (Girardot) and its association with reported perceptions, rationales and socio-demographic characteristics with a mixed methods approach. Knowledge, attitudes and practices and entomological surveys from 1,721 households and 26 semi-structured interviews were conducted among residents of Girardot and technicians of the local vector borne disease program. A multivariate analysis was performed to identify associations between a water storage practice and socio-demographic characteristics, and knowledge, attitudes and practices about dengue and immature forms of the vector, which were then triangulated with qualitative information. Water storage is a cultural practice in Girardot. There are two main reasons for storage: The scarcity concern based on a long history of shortages of water in the region and the perception of high prices in water rates, contrary to what was reported by the local water company. The practice of water storage was associated with being a housewife (Inverse OR: 2.6, 95% CI 1.5 -4.3). The use of stored water depends on the type of container used, while water stored in alberca (Intra household cement basins) is mainly used for domestic cleaning chores, water in plastic containers is used for cooking. It is essential to understand social practices that can increase or reduce the number of breeding sites of Ae. Aegypti. Identification of individuals who store water and the rationale of such storage allow a better understanding of the social dynamics that lead to water accumulation.

Understanding Water Storage Practices of Urban Residents of an Endemic Dengue Area in Colombia: Perceptions, Rationale and Socio-Demographic Characteristics

PubMed Central

González-Uribe, Catalina; Cortés, Sebastian; Quintero, Juliana

2015-01-01

Introduction The main preventive measure against dengue virus transmission is often based on actions to control Ae. Aegypti reproduction by targeting water containers of clean and stagnant water. Household water storage has received special attention in prevention strategies but the evidence about the rationale of this human practice is limited. The objective was to identify and describe water storage practices among residents of an urban area in Colombia (Girardot) and its association with reported perceptions, rationales and socio-demographic characteristics with a mixed methods approach. Methods Knowledge, attitudes and practices and entomological surveys from 1,721 households and 26 semi-structured interviews were conducted among residents of Girardot and technicians of the local vector borne disease program. A multivariate analysis was performed to identify associations between a water storage practice and socio-demographic characteristics, and knowledge, attitudes and practices about dengue and immature forms of the vector, which were then triangulated with qualitative information. Results Water storage is a cultural practice in Girardot. There are two main reasons for storage: The scarcity concern based on a long history of shortages of water in the region and the perception of high prices in water rates, contrary to what was reported by the local water company. The practice of water storage was associated with being a housewife (Inverse OR: 2.6, 95% CI 1.5 -4.3). The use of stored water depends on the type of container used, while water stored in alberca (Intra household cement basins) is mainly used for domestic cleaning chores, water in plastic containers is used for cooking. Conclusions It is essential to understand social practices that can increase or reduce the number of breeding sites of Ae. Aegypti. Identification of individuals who store water and the rationale of such storage allow a better understanding of the social dynamics that lead to water accumulation. PMID:26061628

Alternative, Green Processes for the Precision Cleaning of Aerospace Hardware

NASA Technical Reports Server (NTRS)

Maloney, Phillip R.; Grandelli, Heather Eilenfield; Devor, Robert; Hintze, Paul E.; Loftin, Kathleen B.; Tomlin, Douglas J.

2014-01-01

Precision cleaning is necessary to ensure the proper functioning of aerospace hardware, particularly those systems that come in contact with liquid oxygen or hypergolic fuels. Components that have not been cleaned to the appropriate levels may experience problems ranging from impaired performance to catastrophic failure. Traditionally, this has been achieved using various halogenated solvents. However, as information on the toxicological and/or environmental impacts of each came to light, they were subsequently regulated out of use. The solvent currently used in Kennedy Space Center (KSC) precision cleaning operations is Vertrel MCA. Environmental sampling at KSC indicates that continued use of this or similar solvents may lead to high remediation costs that must be borne by the Program for years to come. In response to this problem, the Green Solvents Project seeks to develop state-of-the-art, green technologies designed to meet KSCs precision cleaning needs.Initially, 23 solvents were identified as potential replacements for the current Vertrel MCA-based process. Highly halogenated solvents were deliberately omitted since historical precedents indicate that as the long-term consequences of these solvents become known, they will eventually be regulated out of practical use, often with significant financial burdens for the user. Three solvent-less cleaning processes (plasma, supercritical carbon dioxide, and carbon dioxide snow) were also chosen since they produce essentially no waste stream. Next, experimental and analytical procedures were developed to compare the relative effectiveness of these solvents and technologies to the current KSC standard of Vertrel MCA. Individually numbered Swagelok fittings were used to represent the hardware in the cleaning process. First, the fittings were cleaned using Vertrel MCA in order to determine their true cleaned mass. Next, the fittings were dipped into stock solutions of five commonly encountered contaminants and were weighed again showing typical contaminant deposition levels of approximately 0.00300g per part. They were then cleaned by the solvent or process being tested and then weighed a third time which allowed for the calculation of the cleaning efficiency of the test solvent or process.Based on preliminary experiments, five solvents (ethanol, isopropanol, acetone, ethyl acetate, and tert-butyl acetate) were down selected for further testing. When coupled with ultrasonic agitation, these solvents removed hydrocarbon contaminants as well as Vertrel MCA and showed improved removal of perfluorinated greases. Supercritical carbon dioxide did an excellent job dissolving each of the five contaminants but did a poor job of removing Teflon particles found in the perfluorinated greases. Plasma cleaning efficiency was found to be dependent on which supply gas was used, exposure time, and gas pressure. Under optimized conditions it was found that breathing air, energized to the plasma phase, was able to remove nearly 100% of the contamination.These findings indicate that alternative cleaning methods are indeed able to achieve precision levels of cleanliness. Currently, our team is working with a commercial cleaning company to get independent verification of our results. We are also evaluating the technical and financial aspects of scaling these processes to a size capable of supporting the future cleaning needs of KSC.

Effectiveness of aged graffiti cleaning on granite by chemical and mechanical procedures

NASA Astrophysics Data System (ADS)

Gomes, Vera; Dionísio, Amélia; Santiago Pozo-Antonio, José

2017-04-01

Granite is one of the most common building stones in the European Cultural Heritage mainly in Northwest Iberian Peninsula. Nowadays, graffiti when a result of an act of vandalism is one of the most important threat, involving a serious risk to heritage sustainability. The cleaning is expensive and in most of the cases, the complete removal is not achieved. Many cities worldwide spend huge amounts of money in cleaning campaigns and European Commission started to create urban environment policies to prevent and eliminate graffiti and also finance projects to develop new cleaning procedures and antigraffiti coatings1,2. However, in many cases graffiti is applied in monuments and façades without antigraffiti and in real practice, they are only cleaned after being long exposure to the atmosphere, reaction with the environment (rain and atmospheric pollutants) and also with the substrate, leading changes in their physical and chemical properties. However, no scientific studies focused on graffiti aging were found and also on the influence of the aging on the cleaning effectiveness, which is always evaluated with fresh graffiti. Therefore, the need to optimize the cleaning of aged graffiti is urgent. This paper aims to study the influence of the exposition of graffiti paintings to one of the most important urban contaminant SO2 on the cleaning effectiveness of graffiti on the valuable ornamental granite Rosa Porriño. Two different chemical products and two different mechanical procedures based on low pressure projection (wet and dry) were evaluated. Four different colour graffiti paintings (red, black, blue and silver) with different compositions were tested. The criteria for assessing the global cleaning effectiveness was considering the graffiti extraction and also the damage induced on the substrate through changes in the chromatic parameters, static contact angle and surface roughness of the stones, identification of deleterious products and modification of the morphology and the composition of the surfaces. The previous characterization of the aged graffiti subjected to SO2 in an artificial chamber was also performed. After the evaluation of the global cleaning effectiveness, it was found that silver graffiti was the most sensitive painting to the aging under SO2 exposure and its higher deterioration degree hindered the cleaning, mainly with the chemical products. Also, the presence of neoformated minerals in the graffiti layers influenced the cleaning effectiveness achieved. Acknowledgements: This project is financed by Fundação Calouste Gulbenkian (Programa de Estímulo à Investigação). J.S. Pozo-Antonio was supported by a postdoctoral contract with the University of Vigowithin the framework of the 2011-2015 Galicia Plan for Research, Innovation and Growth (Plan I2C) for 2014. The authors also gratefully acknowledge the support of the CERENA (strategic project FCT-UID/ECI/04028/2013).