CONSIDERATION IN THE DESIGN OF TREATMENT BEST MANAGEMENT PRACTICES (BMPS) TO IMPROVE WATER QUALITY

EPA Science Inventory

Today, many municipalities are implementing low-cost best management practices (BMPs). The lowest cost BMPs, termed non-structural or source control BMPs, include practices such as limiting pesticide use in agricultural areas. There are a set of higher cost BMPs, which involve ...

Presence without Being Present: Reflection and Action in a Community of Practice

ERIC Educational Resources Information Center

Enfield, Mark; Stasz, Bird

2011-01-01

Reflection and Communities of Practice are common constructs in teacher education. Co-teaching is often seen as beneficial, yet teacher education students rarely have experiences being co-taught. Thus, reflection, communities of practice, and co-teaching, deserve careful consideration in designing teacher education learning experiences. Based on…

Implementing AORN recommended practices for MIS: Part II.

PubMed

Morton, Paula J

2012-10-01

This article focuses on the equipment and workplace safety aspects of the revised AORN "Recommended practices for minimally invasive surgery." A multidisciplinary team that includes the perioperative nurse should be established to discuss aspects of the development and design of new construction or renovation (eg, room access, ergonomics, low-lighting, OR integration, hybrid OR considerations, design development). Equipment safety considerations during minimally invasive surgical procedures include using active electrode monitoring; verifying the properties of distention media; using smoke evacuation systems; reducing equipment, electrical, thermal, and fire hazards; performing routine safety checks on insufflation accessories; and minimizing the risk of ergonomic injuries to staff members. Additional considerations include using video recording devices, nonmagnetic equipment during magnetic resonance imaging, and fluid containment methods for fluid management. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

A flexible framework for process-based hydraulic and water quality modeling of stormwater green infrastructure performance

EPA Science Inventory

Background Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. While popular, generally, the GI models are relatively simplistic. However,...

Practicalities and Research Considerations for Conducting Childhood Obesity Prevention Interventions with Families

PubMed Central

Morgan, Philip J.; Jones, Rachel A.; Collins, Clare E.; Hesketh, Kylie D.; Young, Myles D.; Burrows, Tracy L.; Magarey, Anthea M.; Brown, Helen L.; Hinkley, Trina; Perry, Rebecca A.; Brennan, Leah; Spence, Alison C.; Campbell, Karen J.

2016-01-01

Internationally, childhood obesity is a major public health concern. Given the established difficulties in treating obesity, designing and evaluating effective obesity prevention interventions are research priorities. As parents play a crucial role in establishing positive health behaviours in children, they are a key target for child obesity prevention programs. However, recruiting and engaging parents in such interventions can be a considerable challenge for researchers and practitioners. Members of the ‘Parenting, Child Behaviour and Well-being’ stream of the Australasian Child and Adolescent Obesity Research Network (ACAORN) have considerable and varied expertise in conducting such interventions and can provide insights into addressing these challenges. This paper aims to highlight considerations regarding the design, implementation, and evaluation of obesity prevention interventions with families and provide practical insights and recommendations for researchers and practitioners conducting family-based research in this area. Case studies of three family-based interventions conducted by ACAORN members are highlighted to provide examples and contextualise the recommendations proposed. PMID:27834820

Designing for Diffusion: How Can We Increase Uptake of Cancer Communication Innovations?

PubMed Central

Dearing, James W.; Kreuter, Matthew W.

2010-01-01

Objective The best innovations in cancer communication do not necessarily achieve uptake by researchers, public health and clinical practitioners, and policy makers. This paper describes design activities that can be applied and combined for the purpose of spreading effective cancer communication innovations. Methods A previously developed Push-Pull-Infrastructure Model is used to organize and highlight the types of activities that can be deployed during the design phase of innovations. Scientific literature about the diffusion of innovations, knowledge utilization, marketing, public health, and our experiences in working to spread effective practices, programs, and policies are used for this purpose. Results Attempts to broaden the reach, quicken the uptake, and facilitate the use of cancer communication innovations can apply design activities to increase the likelihood of diffusion. Some simple design activities hold considerable promise for improving dissemination and subsequent diffusion. Conclusion Augmenting current dissemination practices with evidence-based concepts from diffusion science, marketing science, and knowledge utilization hold promise for improving results by eliciting greater market pull. Practice Implications Inventors and change agencies seeking to spread cancer communication innovations can experience more success by explicit consideration of design activities that reflect an expanded version of the Push-Pull-Infrastructure Model. PMID:21067884

Automatic Layout Design for Power Module

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ning, Puqi; Wang, Fei; Ngo, Khai

The layout of power modules is one of the key points in power module design, especially for high power densities, where couplings are increased. In this paper, along with the design example, an automatic design processes by using a genetic algorithm are presented. Some practical considerations and implementations are introduced in the optimization of module layout design.

A static analysis method for barge-impact design of bridges with consideration of dynamic amplification : final report, November 2009.

DOT National Transportation Integrated Search

2009-11-01

Current practice with regard to designing bridge structures to resist impact loads associated with barge collisions relies upon the : use of the American Association of State Highway and Transportation Officials (AASHTO) bridge design specifications....

Maximum-performance fiber-optic irradiation with nonimaging designs.

PubMed

Fang, Y; Feuermann, D; Gordon, J M

1997-10-01

A range of practical nonimaging designs for optical fiber applications is presented. Rays emerging from a fiber over a restricted angular range (small numerical aperture) are needed to illuminate a small near-field detector at maximum radiative efficiency. These designs range from pure reflector (all-mirror), to pure dielectric (refractive and based on total internal reflection) to lens-mirror combinations. Sample designs are shown for a specific infrared fiber-optic irradiation problem of practical interest. Optical performance is checked with computer three-dimensional ray tracing. Compared with conventional imaging solutions, nonimaging units offer considerable practical advantages in compactness and ease of alignment as well as noticeably superior radiative efficiency.

GENERAL DESIGN CONSIDERATIONS IN BMP DESIGN

EPA Science Inventory

Today, many municipalities are implementing best management practices (BMPs) for
wet-weather flow. The most commonly used structural treatment BMPs that will be discussed in the presentation are ponds (detention/retention) and vegetated biofilters (swales and filter/buffer...

GENERAL DESIGN CONSIDERATIONS IN BMP DESIGN

EPA Science Inventory

Today, many municipalities are implementing best management practices (BMPs). The most commonly used structural treatment BMPs that will be discussed in the presentation are ponds (detention/retention) and vegetated biofilters (swales and filter/buffer strips).

Historical...

Design and analysis issues for economic analysis alongside clinical trials.

PubMed

Marshall, Deborah A; Hux, Margaret

2009-07-01

Clinical trials can offer a valuable and efficient opportunity to collect the health resource use and outcomes data for economic evaluation. However, economic and clinical studies differ fundamentally in the question they seek to answer. The design and analysis of trial-based cost-effectiveness studies require special consideration, which are reviewed in this article. Traditional randomized controlled trials, using an experimental design with a controlled protocol, are designed to measure safety and efficacy for product registration. Cost-effectiveness analysis seeks to measure effectiveness in the context of routine clinical practice, and requires collection of health care resources to allow estimation of cost over an equal timeframe for each treatment alternative. In assessing suitability of a trial for economic data collection, the comparator treatment and other protocol factors need to reflect current clinical practice and the trial follow-up must be sufficiently long to capture important costs and effects. The broadest available population and a measure of effectiveness reflecting important benefits for patients are preferred for economic analyses. Special analytical issues include dealing with missing and censored cost data, assessing uncertainty of the incremental cost-effectiveness ratio, and accounting for the underlying heterogeneity in patient subgroups. Careful consideration also needs to be given to data from multinational studies since practice patterns can differ across countries. Although clinical trials can be an efficient opportunity to collect data for economic evaluation, careful consideration of the suitability of the study design, and appropriate analytical methods must be applied to obtain rigorous results.

MUNICIPAL WASTE COMBUSTION ASSESSMENT: MEDICAL WASTE COMBUSTION PRACTICES AT MUNICIPAL WASTE COMBUSTION FACILITIES

EPA Science Inventory

The report defines and characterizes types of medical waste, discusses the impacts of burning medical waste on combustor emissions, and outlines important handling and operating considerations. Facility-specific design, handling, and operating practiced are also discussed for mun...

Designers as Teachers and Learners: Transferring Workplace Design Practice into Educational Settings

ERIC Educational Resources Information Center

Mawson, B.

2007-01-01

The nature of the design process and how to develop this skill in novice designers has been of considerable interest to technology educators. The relationship between workplace and school-based design is one area in which a need for further research has been identified by Hill and Anning (2001, "International Journal of Technology and Design…

Research design considerations for single-dose analgesic clinical trials in acute pain: IMMPACT recommendations.

PubMed

Cooper, Stephen A; Desjardins, Paul J; Turk, Dennis C; Dworkin, Robert H; Katz, Nathaniel P; Kehlet, Henrik; Ballantyne, Jane C; Burke, Laurie B; Carragee, Eugene; Cowan, Penney; Croll, Scott; Dionne, Raymond A; Farrar, John T; Gilron, Ian; Gordon, Debra B; Iyengar, Smriti; Jay, Gary W; Kalso, Eija A; Kerns, Robert D; McDermott, Michael P; Raja, Srinivasa N; Rappaport, Bob A; Rauschkolb, Christine; Royal, Mike A; Segerdahl, Märta; Stauffer, Joseph W; Todd, Knox H; Vanhove, Geertrui F; Wallace, Mark S; West, Christine; White, Richard E; Wu, Christopher

2016-02-01

This article summarizes the results of a meeting convened by the Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT) on key considerations and best practices governing the design of acute pain clinical trials. We discuss the role of early phase clinical trials, including pharmacokinetic-pharmacodynamic (PK-PD) trials, and the value of including both placebo and active standards of comparison in acute pain trials. This article focuses on single-dose and short-duration trials with emphasis on the perioperative and study design factors that influence assay sensitivity. Recommendations are presented on assessment measures, study designs, and operational factors. Although most of the methodological advances have come from studies of postoperative pain after dental impaction, bunionectomy, and other surgeries, the design considerations discussed are applicable to many other acute pain studies conducted in different settings.

Students' Knowledge Sources and Knowledge Sharing in the Design Studio--An Exploratory Study

ERIC Educational Resources Information Center

Chiu, Sheng-Hsiao

2010-01-01

Architectural design is a knowledge-intensive activity; however, students frequently lack sufficient knowledge when they practice design. Collaborative learning can supplement the students' insufficient expertise. Successful collaborative learning relies on knowledge sharing between students. This implies that the peers are a considerable design…

Feedback Control Systems Loop Shaping Design with Practical Considerations

NASA Technical Reports Server (NTRS)

Kopsakis, George

2007-01-01

This paper describes loop shaping control design in feedback control systems, primarily from a practical stand point that considers design specifications. Classical feedback control design theory, for linear systems where the plant transfer function is known, has been around for a long time. But it s still a challenge of how to translate the theory into practical and methodical design techniques that simultaneously satisfy a variety of performance requirements such as transient response, stability, and disturbance attenuation while taking into account the capabilities of the plant and its actuation system. This paper briefly addresses some relevant theory, first in layman s terms, so that it becomes easily understood and then it embarks into a practical and systematic design approach incorporating loop shaping design coupled with lead-lag control compensation design. The emphasis is in generating simple but rather powerful design techniques that will allow even designers with a layman s knowledge in controls to develop effective feedback control designs.

NASA preferred reliability-practices for design and test

NASA Technical Reports Server (NTRS)

Lisk, Ronald C.

1992-01-01

NASA HQ established the NASA R&M Steering Committee (R&MSC) comprised of membership from each NASA field center. The primary charter of the R&MSC is to obtain, record, and share the best design practices that NASA has applied to successful space flight programs and current design considerations (guidelines) that should enhance flight reliability on emerging programs. The practices and guidelines are being assembled in a living document for distribution to NASA centers and the aerospace community. The document will be updated annually with additional practices and guidelines as contributions from the centers are reviewed and approved by the R&MSC. Practices and guidelines are not requirements, but rather a means of sharing procedures and techniques that a given center and the R&MSC together feel have strong technical merit and application to the design of space-related equipment.

Considerations for Micro- and Nano-scale Space Payloads

NASA Technical Reports Server (NTRS)

Altemir, David A.

1995-01-01

This paper collects and summarizes many of the issues associated with the design, analysis, and flight of space payloads. However, highly miniaturized experimental packages are highly susceptible to the deleterious effects of induced contamination and charged particles when they are directly exposed to the space environment. These two problem areas are addressed and a general discussion of space environments, applicable design and analysis practices (with extensive references to the open literature) and programmatic considerations are presented.

Best practices for implementing, testing and using a cloud-based communication system in a disaster situation.

PubMed

Makowski, Dale

2016-01-01

This paper sets out the basics for approaching the selection and implementation of a cloud-based communication system to support a business continuity programme, including: • consideration for how a cloud-based communication system can enhance a business continuity programme; • descriptions of some of the more popular features of a cloud-based communication system; • options to evaluate when selecting a cloud-based communication system; • considerations for how to design a system to be most effective for an organisation; • best practices for how to conduct the initial load of data to a cloud-based communication system; • best practices for how to conduct an initial validation of the data loaded to a cloud-based communication system; • considerations for how to keep contact information in the cloud-based communication system current and accurate; • best practices for conducting ongoing system testing; • considerations for how to conduct user training; • review of other potential uses of a cloud-based communication system; and • review of other tools and features many cloud-based communication systems may offer.

Turbine Engine Testing.

DTIC Science & Technology

1981-01-01

per-rev, ring weighting factor, etc.) and with compression system design . A detailed description of the SAE methodology is provided in Ref. 1...offers insights into the practical application of experimental aeromechanical procedures and establishes the process of valid design assessment, avoiding...considerations given to the total engine system. Design Verification in the Experimental Laboratory Certain key parameters are influencing the design of modern

Participatory Educational Design: How to Improve Mutual Learning and the Quality and Usability of the Design?

ERIC Educational Resources Information Center

Janssen, Fred J. J. M.; Könings, Karen D.; van Merriënboer, Jeroen J. G.

2017-01-01

Many educational change proposals, designed to improve student learning, fail to be implemented in classrooms, which is a threat to the impact of educational policy on educational practice. This has led to a call for participatory educational design in which different stakeholders are involved in the generation and consideration of alternative…

LIFE CYCLE DESIGN FRAMEWORK AND DEMONSTRATION PROJECTS - PROFILES OF AT&T AND ALLIED SIGNAL

EPA Science Inventory

This document offers guidance and practical experience for integrating environmental considerations into product system development. Life cycle design seeks to minimize the environmental burden associated with a product's life cycle from raw materials acquisition through manufact...

Feed-in Tariffs: Good Practices and Design Considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, Sadie; Esterly, Sean

2016-01-02

In recent years, feed-in tariff (FIT) activity has focused primarily on revisions to current policies, underscoring the need for stable and predictable, yet flexible, policy environments. This policy brief provides a primer on key FIT design elements, lessons from country experience, and support resources to enable more detailed and country-specific FIT policy design.

Secondary Containment Design for the LLNL B801 Diala Oil Tank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mertesdorf, E.

2016-12-14

Design is to add an extension to the secondary containment of tank T1-A3 at building 801. Piping from the inner tank penetrates the secondary containment tank below the liquid level of the primary tank. To meet Oil Pollution Prevention Regulation 40 CFR 120.7 the single wall piping needs to be provided with secondary containment. Steel Tank Institute (STI) conference publication states: §112.3(d)(1)(iii) –SPCC Plan requirements- Systems shall be designed in accordance with good engineering practice, including consideration of applicable industry standards and that procedures for required inspections and testing have been established. Section 112.7(a)(2) allows for deviations from specific rulemore » requirements, provided the Owner/operator responsible to select, document and implement alternate measure and a PE certifies the SPCC Plan in accordance with good engineering practices, including consideration of industry standards« less

Mixing methodology, nursing theory and research design for a practice model of district nursing advocacy.

PubMed

Reed, Frances M; Fitzgerald, Les; Rae, Melanie

2016-01-01

To highlight philosophical and theoretical considerations for planning a mixed methods research design that can inform a practice model to guide rural district nursing end of life care. Conceptual models of nursing in the community are general and lack guidance for rural district nursing care. A combination of pragmatism and nurse agency theory can provide a framework for ethical considerations in mixed methods research in the private world of rural district end of life care. Reflection on experience gathered in a two-stage qualitative research phase, involving rural district nurses who use advocacy successfully, can inform a quantitative phase for testing and complementing the data. Ongoing data analysis and integration result in generalisable inferences to achieve the research objective. Mixed methods research that creatively combines philosophical and theoretical elements to guide design in the particular ethical situation of community end of life care can be used to explore an emerging field of interest and test the findings for evidence to guide quality nursing practice. Combining philosophy and nursing theory to guide mixed methods research design increases the opportunity for sound research outcomes that can inform a nursing model of care.

Resonator Optical Designs For Free Electron Lasers

NASA Astrophysics Data System (ADS)

Viswanathan, V. K.; Saxman, A.; Woodfin, G.

1985-11-01

The output beam from free-electron lasers tends to be a thin, pencil-like beam because of the nature of the gain volume. For moderate power devices, mirror damage considerations imply that the beam has to travel many meters before it can expand enough to allow retro-reflection from state-of-the-art mirrors. However, use of grazing incidence optics can resolve the problem of damage to the optical elements and result in a cavity of reasonable dimensions. The optical design considerations for such resonators are addressed in this paper. A few of the practical resonator designs approaching diffraction limited performance are presented.

Resonator optical designs for free electron lasers

NASA Astrophysics Data System (ADS)

Viswanathan, V. K.; Saxman, A.; Woodfin, G.

1985-03-01

The output beam from free-electron lasers tends to be a thin, pencil-like beam because of the nature of the gain volume. For moderate power devices, mirror damage considerations imply that the beam has to travel many meters before it can expand enough to allow retro-reflection from state-of-the-art mirrors. However, use of grazing incidence optics can resolve the problem of damage to the optical elements and result in a cavity of reasonable dimensions. The optical design considerations for such resonators are discussed. A few of the practical resonator designs approaching diffraction limited performance are presented.

Desktop Design for ESOL Teachers.

ERIC Educational Resources Information Center

Walker, Susan

The guide for teachers of English as a Second Language offers practical advice on the format and layout of instructional materials they produce using desktop publishing technology. An introductory section discusses important design considerations for producing effective materials. Subsequent sections describe how to: organize ideas; outline the…

Random Assignment: Practical Considerations from Field Experiments.

ERIC Educational Resources Information Center

Dunford, Franklyn W.

1990-01-01

Seven qualitative issues associated with randomization that have the potential to weaken or destroy otherwise sound experimental designs are reviewed and illustrated via actual field experiments. Issue areas include ethics and legality, liability risks, manipulation of randomized outcomes, hidden bias, design intrusiveness, case flow, and…

Guidelines for the Design and Conduct of Clinical Studies in Knee Articular Cartilage Repair

PubMed Central

Mithoefer, Kai; Saris, Daniel B.F.; Farr, Jack; Kon, Elizaveta; Zaslav, Kenneth; Cole, Brian J.; Ranstam, Jonas; Yao, Jian; Shive, Matthew; Levine, David; Dalemans, Wilfried; Brittberg, Mats

2011-01-01

Objective: To summarize current clinical research practice and develop methodological standards for objective scientific evaluation of knee cartilage repair procedures and products. Design: A comprehensive literature review was performed of high-level original studies providing information relevant for the design of clinical studies on articular cartilage repair in the knee. Analysis of cartilage repair publications and synopses of ongoing trials were used to identify important criteria for the design, reporting, and interpretation of studies in this field. Results: Current literature reflects the methodological limitations of the scientific evidence available for articular cartilage repair. However, clinical trial databases of ongoing trials document a trend suggesting improved study designs and clinical evaluation methodology. Based on the current scientific information and standards of clinical care, detailed methodological recommendations were developed for the statistical study design, patient recruitment, control group considerations, study endpoint definition, documentation of results, use of validated patient-reported outcome instruments, and inclusion and exclusion criteria for the design and conduct of scientifically sound cartilage repair study protocols. A consensus statement among the International Cartilage Repair Society (ICRS) and contributing authors experienced in clinical trial design and implementation was achieved. Conclusions: High-quality clinical research methodology is critical for the optimal evaluation of current and new cartilage repair technologies. In addition to generally applicable principles for orthopedic study design, specific criteria and considerations apply to cartilage repair studies. Systematic application of these criteria and considerations can facilitate study designs that are scientifically rigorous, ethical, practical, and appropriate for the question(s) being addressed in any given cartilage repair research project. PMID:26069574

Developing Communication Skills: General Considerations and Specific Techniques.

ERIC Educational Resources Information Center

Joiner, Elizabeth Garner; Westphal, Patricia Barney, Ed.

This practical book is designed for the classroom teacher of a second or foreign language at any level. The articles are grouped into two distinct but interdependent sections on general considerations and specific techniques. The contents of the first section are as follows: "Moi Tarzan, Vous Jane?: A Study of Communicative Competence" by P.B.…

Device considerations for development of conductance-based biosensors

PubMed Central

Lee, Kangho; Nair, Pradeep R.; Scott, Adina; Alam, Muhammad A.; Janes, David B.

2009-01-01

Design and fabrication of electronic biosensors based on field-effect-transistor (FET) devices require understanding of interactions between semiconductor surfaces and organic biomolecules. From this perspective, we review practical considerations for electronic biosensors with emphasis on molecular passivation effects on FET device characteristics upon immobilization of organic molecules and an electrostatic model for FET-based biosensors. PMID:24753627

Technical challenges in designing post-marketing eCRFs to address clinical safety and pharmacovigilance needs.

PubMed

Lu, Zhengwu

2010-01-01

To identify key challenges and propose technical considerations in designing electronic case report form (eCRF) for post-marketing studies, the author undertakes a comprehensive literature review of peer reviewed and grey literature to assess the key aspects, processes, standards, recommendations, and best practices in designing eCRFs based on industry experience in designing and supporting electronic data capture (EDC) studies. Literature search using strings on MEDLINE and PUBMED returned few papers directly related to CRF design. Health informatics and general practice journals were searched and results reviewed. Many conference, government commission, health professional and special interests group websites provide relevant information from practical experience - summarization of this information is presented. Further, we presented a list of concrete technical considerations in dealing with EDC technology/system limitations based on literature assessment and industry implementation experience. It is recognized that cross-functional teams be involved in eCRF design process and decision making. To summarize the keys in designing eCRFs to address post-market study safety and pharmacovigilance needs, the first is to identify required data elements from the study protocol supporting data analyses and reporting requirements. Secondly, accepted best practices, CDASH & CDISC guidelines, and company internal or therapeutic unit standard should be considered and applied. Coding (MedDRA & WHODD) mapping should be managed and implemented as well when possible. Finally, we need to be on top of the EDC technologies, challenge the technologies, drive EDC improvement via working with vendors, and utilize the technologies to drive clinical effectiveness. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Engineering Trade-off Considerations Regarding Design-for-Security, Design-for-Verification, and Design-for-Test

NASA Technical Reports Server (NTRS)

Berg, Melanie; Label, Kenneth

2018-01-01

The United States government has identified that application specific integrated circuit (ASIC) and field programmable gate array (FPGA) hardware are at risk from a variety of adversary attacks. This finding affects system security and trust. Consequently, processes are being developed for system mitigation and countermeasure application. The scope of this tutorial pertains to potential vulnerabilities and countermeasures within the ASIC/FPGA design cycle. The presentation demonstrates how design practices can affect the risk for the adversary to: change circuitry, steal intellectual property, and listen to data operations. An important portion of the design cycle is assuring the design is working as specified or as expected. This is accomplished by exhaustive testing of the target design. Alternatively, it has been shown that well established schemes for test coverage enhancement (design-for-verification (DFV) and design-for-test (DFT)) can create conduits for adversary accessibility. As a result, it is essential to perform a trade between robust test coverage versus reliable design implementation. The goal of this tutorial is to explain the evolution of design practices; review adversary accessibility points due to DFV and DFT circuitry insertion (back door circuitry); and to describe common engineering trade-off considerations for test versus adversary threats.

Proactive approaches for mold-free interior environments.

PubMed

Warsco, Katherine; Lindsey, Patricia F

2003-08-01

Interior design education and practice can contribute to the prevention of mold growth in indoor environments. The authors provide an overview of current thinking within the interior design educational and professional communities regarding proactive approaches to achieving mold-free building interiors, including identification of current best practices for the prevention of mold problems in buildings. They also discuss the development of certification programs. A review of recent literature points to the need for interior designers to be educated to specify the use of ecologically sound materials that support the health of building occupants. The authors present trade-offs between best practices for designing mold-free indoor environments (including considerations of cost, maintenance, and operation) and occupant comfort, health, and well-being.

Breathing Easy

EPA Pesticide Factsheets

This fact sheet provides practical information and guidance to auto refinish shops on proper ventilation of paint mixing rooms, including ventilation system basics and diagrams, risk reduction ideas, common mistakes, tips, and design considerations.

Renewable Electricity Standards: Good Practices and Design Considerations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, Sadie; Esterly, Sean

2016-01-02

In widespread use globally, renewable electricity standards (RES) are one of the most widely adopted renewable energy policies and a critical regulatory vehicle to accelerate renewable energy deployment. This policy brief provides an introduction to key RES design elements, lessons from country experience, and support resources to enable more detailed and country-specific RES policy design.

Photovoltaic central station step and touch potential considerations in grounding system design

NASA Technical Reports Server (NTRS)

Engmann, G.

1983-01-01

The probability of hazardous step and touch potentials is an important consideration in central station grounding system design. Steam turbine generating station grounding system design is based on accepted industry practices and there is extensive in-service experience with these grounding systems. A photovoltaic (PV) central station is a relatively new concept and there is limited experience with PV station grounding systems. The operation and physical configuration of a PV central station is very different from a steam electric station. A PV station bears some similarity to a substation and the PV station step and touch potentials might be addressed as they are in substation design. However, the PV central station is a generating station and it is appropriate to examine the effect that the differences and similarities of the two types of generating stations have on step and touch potential considerations.

Dutch Adolescents' Tolerance of Practices by Muslim Actors: The Effect of Issue Framing

ERIC Educational Resources Information Center

Gieling, Maike; Thijs, Jochem; Verkuyten, Maykel

2012-01-01

This research, conducted in the Netherlands, examines whether native adolescents' tolerance of practices by Muslim immigrants (e.g., the founding of Islamic schools) is affected by the type of considerations (e.g., educational freedom vs. integration of Muslims in Dutch society). Using an experimental questionnaire design (N = 970), the findings…

Improving EFL Learners' Pronunciation of English through Quiz-Demonstration-Practice-Revision (QDPR)

ERIC Educational Resources Information Center

Moedjito

2018-01-01

This study investigates the effectiveness of Quiz-Demonstration-Practice-Revision (QDPR) in improving EFL learners' pronunciation of English. To achieve the goal, the present researcher conducted a one-group pretest-posttest design. The experimental group was selected using a random sampling technique with consideration of the inclusion criteria.…

How to Design, Analyze, and Write Doctoral or Masters Research. Second Edition.

ERIC Educational Resources Information Center

Balian, Edward S.

A practical guide to conducting and reporting graduate-level research projects outlines each step in the research process and discusses both practical and theoretical considerations. Chapter 1 addresses idea and topic development. Chapter 2 discusses the purposes, procedures, and sources for literature reviews and searches. In chapter 3, the…

A unified technology plan for fatigue and fracture design

NASA Technical Reports Server (NTRS)

Hardrath, H. F.

1973-01-01

An integrated research program is proposed that seeks to improve the technology of designing against fatigue and fracture and to develop a computerized capability for assessing the adequacy of a given design. Both fatigue life prediction and damage tolerance considerations are incorporated. The research for each of these considerations is organized to account for material behavior, the effect of structural configurations, the cumulative effects of the operating loadings, and for the effects of environment - temperature and corrosion. The goal is to achieve a viable fatigue and fracture design procedure for any practical problem. The overall program is outlined, assessments are made of the state of the art, subgoals are proposed, and means for achieving them are suggested.

A framework for developing rural academic general practices: a qualitative case study in rural Victoria.

PubMed

Brown, J B; Morrison, Tracy; Bryant, Melanie; Kassell, Lisa; Nestel, Debra

2015-01-01

There is increasing pressure for Australian rural general practices to engage in educational delivery as a means of addressing workforce issues and accommodating substantial increases in learners. For practices that have now developed a strong focus on education, there is the challenge to complement this by engaging in research activity. This study develops a rural academic general practice framework to assist rural practices in developing both comprehensive educational activity and a strong research focus thus moving towards functioning as mature academic units. A case study research design was used with the unit of analysis at the level of the rural general practice. Purposively sampled practices were recruited and individual interviews conducted with staff (supervisors, practice managers, nurses), learners (medical students, interns and registrars) and patients. Three practices hosted 'multi-level learners', two practices hosted one learner group and one had no learners. Forty-four individual interviews were conducted with staff, learners and patients. Audio recordings were transcribed for thematic analysis. After initial inductive coding, deductive analysis was undertaken with reference to recent literature and the expertise of the research team resulting in the rural academic general practice framework. Three key themes emerged with embedded subthemes. For the first theme, organisational considerations, subthemes were values/vision/culture, patient population and clinical services, staffing, physical infrastructure/equipment, funding streams and governance. For the second theme, educational considerations, subthemes were processes, clinical supervision, educational networks and learner presence. Third, for research considerations, there were the subthemes of attitude to research and research activity. The framework maps the development of a rural academic practice across these themes in four progressive stages: beginning, emerging, consolidating and established. The data enabled a framework to be constructed to map rural general practice activity with respect to activity characteristic of an academic general practice. The framework offers guidance to practices seeking to transition towards becoming a mature academic practice. The framework also offers guidance to educational institutions and funding bodies to support the development of academic activity in rural general practices. The strengths and limitations of the study design are outlined.

77 FR 26292 - Risk Evaluation and Mitigation Strategy Assessments: Social Science Methodologies to Assess Goals...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

... determine endpoints; questionnaire design and analyses; and presentation of survey results. To date, FDA has..., the workshop will invest considerable time in identifying best methodological practices for conducting... sample, sample size, question design, process, and endpoints. Panel 2 will focus on alternatives to...

A Testlet Assembly Design for Adaptive Multistage Tests

ERIC Educational Resources Information Center

Luecht, Richard; Brumfield, Terry; Breithaupt, Krista

2006-01-01

This article describes multistage tests and some practical test development considerations related to the design and implementation of a multistage test, using the Uniform CPA (certified public accountant) Examination as a case study. The article further discusses the use of automated test assembly procedures in an operational context to produce…

Team-Based Curriculum Design as an Agent of Change

ERIC Educational Resources Information Center

Burrell, Andrew R.; Cavanagh, Michael; Young, Sherman; Carter, Helen

2015-01-01

Curriculum design in higher education environments, namely the consideration of aims, learning outcomes, syllabus, pedagogy and assessment, can often be ad hoc and driven by informal cultural habits. Academics with disciplinary expertise may be resistant to (or ignorant of) pedagogical approaches beyond existing practice. In an environment where…

Scientific, statistical, practical, and regulatory considerations in design space development.

PubMed

Debevec, Veronika; Srčič, Stanko; Horvat, Matej

2018-03-01

The quality by design (QbD) paradigm guides the pharmaceutical industry towards improved understanding of products and processes, and at the same time facilitates a high degree of manufacturing and regulatory flexibility throughout the establishment of the design space. This review article presents scientific, statistical and regulatory considerations in design space development. All key development milestones, starting with planning, selection of factors, experimental execution, data analysis, model development and assessment, verification, and validation, and ending with design space submission, are presented and discussed. The focus is especially on frequently ignored topics, like management of factors and CQAs that will not be included in experimental design, evaluation of risk of failure on design space edges, or modeling scale-up strategy. Moreover, development of a design space that is independent of manufacturing scale is proposed as the preferred approach.

Mutual information based feature selection for medical image retrieval

NASA Astrophysics Data System (ADS)

Zhi, Lijia; Zhang, Shaomin; Li, Yan

2018-04-01

In this paper, authors propose a mutual information based method for lung CT image retrieval. This method is designed to adapt to different datasets and different retrieval task. For practical applying consideration, this method avoids using a large amount of training data. Instead, with a well-designed training process and robust fundamental features and measurements, the method in this paper can get promising performance and maintain economic training computation. Experimental results show that the method has potential practical values for clinical routine application.

Design and validation of instruments to measure knowledge.

PubMed

Elliott, T E; Regal, R R; Elliott, B A; Renier, C M

2001-01-01

Measuring health care providers' learning after they have participated in educational interventions that use experimental designs requires valid, reliable, and practical instruments. A literature review was conducted. In addition, experience gained from designing and validating instruments for measuring the effect of an educational intervention informed this process. The eight main steps for designing, validating, and testing the reliability of instruments for measuring learning outcomes are presented. The key considerations and rationale for this process are discussed. Methods for critiquing and adapting existent instruments and creating new ones are offered. This study may help other investigators in developing valid, reliable, and practical instruments for measuring the outcomes of educational activities.

Computer Based Testing Using "Digital Ink": Participatory Design of a Tablet PC Based Assessment Application for Secondary Education

ERIC Educational Resources Information Center

Siozos, Panagiotis; Palaigeorgiou, George; Triantafyllakos, George; Despotakis, Theofanis

2009-01-01

In this paper, we identify key challenges faced by computer-based assessment (CBA) in secondary education and we put forward a framework of design considerations: design with the students and teachers, select the most appropriate media platform and plan an evolution rather than a revolution of prior practices. We present the CBA application…

Design and control considerations for industrial and space manipulators

NASA Technical Reports Server (NTRS)

Whitney, D. E.; Book, W. J.; Lynch, P. M.

1974-01-01

This paper is a progress report summarizing theoretical and practical results concerning integration of design and control aspects of manipulator arms for industrial or space applications. The relationships between task specifications, gross motions, fine motions, actuator type and location, size and strength of structural members, control servos and strategies, and overall design evaluation are briefly discussed, with some technical examples.

Designing for diffusion: how can we increase uptake of cancer communication innovations?

PubMed

Dearing, James W; Kreuter, Matthew W

2010-12-01

The best innovations in cancer communication do not necessarily achieve uptake by researchers, public health and clinical practitioners, and policy makers. This paper describes design activities that can be applied and combined for the purpose of spreading effective cancer communication innovations. A previously developed Push-Pull-Infrastructure Model is used to organize and highlight the types of activities that can be deployed during the design phase of innovations. Scientific literature about the diffusion of innovations, knowledge utilization, marketing, public health, and our experiences in working to spread effective practices, programs, and policies are used for this purpose. Attempts to broaden the reach, quicken the uptake, and facilitate the use of cancer communication innovations can apply design activities to increase the likelihood of diffusion. Some simple design activities hold considerable promise for improving dissemination and subsequent diffusion. Augmenting current dissemination practices with evidence-based concepts from diffusion science, marketing science, and knowledge utilization hold promise for improving results by eliciting greater market pull. Inventors and change agencies seeking to spread cancer communication innovations can experience more success by explicit consideration of design activities that reflect an expanded version of the Push-Pull-Infrastructure Model. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Effects of Antismoking Advertising–Based Beliefs on Adult Smokers’ Consideration of Quitting

PubMed Central

Netemeyer, Richard G.; Andrews, J. Craig; Burton, Scot

2005-01-01

Objectives. We examined whether specific antismoking advertising–based beliefs regarding the addictiveness of smoking, the dangers of environmental tobacco smoke, and the tobacco industry’s use of deceptive advertising practices are associated with adult smokers’ consideration of quitting. We also assessed whether interactions between such beliefs and having children living in the home were associated with consideration of quitting. Methods. We used analyses of smokers’ responses to a telephone survey conducted after completion of the Wisconsin Anti-Tobacco Media Campaign to test hypotheses associated with our study objectives. Results. Results indicated that advertising-based beliefs regarding smoking addictiveness and the dangers of environmental tobacco smoke were associated with consideration of quitting. The findings also showed that consideration of quitting was positively affected by the interaction between number of children living at home and advertising-based beliefs about deceptive tobacco industry advertising practices designed to induce people to smoke. Conclusions. Creating advertisements that target specific antismoking beliefs may be the most effective approach to enhancing consideration of quitting among adult smokers, particularly those with children living at home. PMID:15914834

Effects of antismoking advertising--based beliefs on adult smokers' consideration of quitting.

PubMed

Netemeyer, Richard G; Andrews, J Craig; Burton, Scot

2005-06-01

We examined whether specific antismoking advertising-based beliefs regarding the addictiveness of smoking, the dangers of environmental tobacco smoke, and the tobacco industry's use of deceptive advertising practices are associated with adult smokers' consideration of quitting. We also assessed whether interactions between such beliefs and having children living in the home were associated with consideration of quitting. We used analyses of smokers' responses to a telephone survey conducted after completion of the Wisconsin Anti-Tobacco Media Campaign to test hypotheses associated with our study objectives. Results indicated that advertising-based beliefs regarding smoking addictiveness and the dangers of environmental tobacco smoke were associated with consideration of quitting. The findings also showed that consideration of quitting was positively affected by the interaction between number of children living at home and advertising-based beliefs about deceptive tobacco industry advertising practices designed to induce people to smoke. Creating advertisements that target specific antismoking beliefs may be the most effective approach to enhancing consideration of quitting among adult smokers, particularly those with children living at home.

Developing longitudinal qualitative designs: lessons learned and recommendations for health services research.

PubMed

Calman, Lynn; Brunton, Lisa; Molassiotis, Alex

2013-02-06

Longitudinal qualitative methods are becoming increasingly used in the health service research, but the method and challenges particular to health care settings are not well described in the literature.We reflect on the strategies used in a longitudinal qualitative study to explore the experience of symptoms in cancer patients and their carers, following participants from diagnosis for twelve months; we highlight ethical, practical, theoretical and methodological issues that need to be considered and addressed from the outset of a longitudinal qualitative study. Key considerations in undertaking longitudinal qualitative projects in health research, include the use of theory, utilizing multiple methods of analysis and giving consideration to the practical and ethical issues at an early stage. These can include issues of time and timing; data collection processes; changing the topic guide over time; recruitment considerations; retention of staff; issues around confidentiality; effects of project on staff and patients, and analyzing data within and across time. As longitudinal qualitative methods are becoming increasingly used in health services research, the methodological and practical challenges particular to health care settings need more robust approaches and conceptual improvement. We provide recommendations for the use of such designs. We have a particular focus on cancer patients, so this paper will have particular relevance for researchers interested in chronic and life limiting conditions.

Applying Universal Design for Learning in Online Courses: Pedagogical and Practical Considerations

ERIC Educational Resources Information Center

Dell, Cindy Ann; Dell, Thomas F.; Blackwell, Terry L.

2015-01-01

Inclusion of the universal design for learning (UDL) model as a guiding set of principles for online curriculum development in higher education is discussed. Fundamentally, UDL provides the student with multiple means of accessing the course based on three overarching principles: presentation; action and expression; and engagement and interaction.…

An Intervention Framework Designed to Develop the Collaborative Problem-Solving Skills of Primary School Students

ERIC Educational Resources Information Center

Gu, Xiaoqing; Chen, Shan; Zhu, Wenbo; Lin, Lin

2015-01-01

Considerable effort has been invested in innovative learning practices such as collaborative inquiry. Collaborative problem solving is becoming popular in school settings, but there is limited knowledge on how to develop skills crucial in collaborative problem solving in students. Based on the intervention design in social interaction of…

Examining the Design Features of a Communication-Rich, Problem-Centred Mathematics Professional Development

ERIC Educational Resources Information Center

de Araujo, Zandra; Orrill, Chandra Hawley; Jacobson, Erik

2018-01-01

While there is considerable scholarship describing principles for effective professional development, there have been few attempts to examine these principles in practice. In this paper, we identify and examine the particular design features of a mathematics professional development experience provided for middle grades teachers over 14 weeks. The…

NPR design basis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Locke, G.L.

1958-09-08

The design basis is composed of requirements and conditions for the design of the reactor plant (composed of the reactor and heat dissipation system). Its intent is to insure that the final product meets the economic, safety, and technical objectives of the project. The design basis is dependent on the ground rules, objectives, technical criteria, and practical design considerations. This document is being issued with the understanding that these items are not yet firmly established in all respects, and therefore, the numbers put down here are subject to change. Consideration of the spectrum of probable changes that might be mademore » leads to the conclusion that the numbers here are close to the final ones and are satisfactory as a basis for the initial stages of design. Some numbers are omitted because of insufficient data at this time.« less

Lyophilization process design space.

PubMed

Patel, Sajal Manubhai; Pikal, Michael J

2013-11-01

The application of key elements of quality by design (QbD), such as risk assessment, process analytical technology, and design space, is discussed widely as it relates to freeze-drying process design and development. However, this commentary focuses on constructing the Design and Control Space, particularly for the primary drying step of the freeze-drying process. Also, practical applications and considerations of claiming a process Design Space under the QbD paradigm have been discussed. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Multidisciplinary Analysis and Optimal Design: As Easy as it Sounds?

NASA Technical Reports Server (NTRS)

Moore, Greg; Chainyk, Mike; Schiermeier, John

2004-01-01

The viewgraph presentation examines optimal design for precision, large aperture structures. Discussion focuses on aspects of design optimization, code architecture and current capabilities, and planned activities and collaborative area suggestions. The discussion of design optimization examines design sensitivity analysis; practical considerations; and new analytical environments including finite element-based capability for high-fidelity multidisciplinary analysis, design sensitivity, and optimization. The discussion of code architecture and current capabilities includes basic thermal and structural elements, nonlinear heat transfer solutions and process, and optical modes generation.

Operational considerations for laminar flow aircraft

NASA Technical Reports Server (NTRS)

Maddalon, Dal V.; Wagner, Richard D.

1986-01-01

Considerable progress has been made in the development of laminar flow technology for commercial transports during the NASA Aircraft Energy Efficiency (ACEE) laminar flow program. Practical, operational laminar flow control (LFC) systems have been designed, fabricated, and are undergoing flight testing. New materials, fabrication methods, analysis techniques, and design concepts were developed and show much promise. The laminar flow control systems now being flight tested on the NASA Jetstar aircraft are complemented by natural laminar flow flight tests to be accomplished with the F-14 variable-sweep transition flight experiment. An overview of some operational aspects of this exciting program is given.

Considerations for Estimating Electrode Performance in Li-Ion Cells

NASA Technical Reports Server (NTRS)

Bennett, William R.

2012-01-01

Advanced electrode materials with increased specific capacity and voltage performance are critical to the development of Li-ion batteries with increased specific energy and energy density. Although performance metrics for individual electrodes are critically important, a fundamental understanding of the interactions of electrodes in a full cell is essential to achieving the desired performance, and for establishing meaningful goals for electrode performance. This paper presents practical design considerations for matching positive and negative electrodes in a viable design. Methods for predicting cell-level discharge voltage, based on laboratory data for individual electrodes, are presented and discussed.

Integrated optical circuit engineering V; Proceedings of the Meeting, San Diego, CA, Aug. 17-20, 1987

NASA Astrophysics Data System (ADS)

Mentzer, Mark A.

Recent advances in the theoretical and practical design and applications of optoelectronic devices and optical circuits are examined in reviews and reports. Topics discussed include system and market considerations, guided-wave phenomena, waveguide devices, processing technology, lithium niobate devices, and coupling problems. Consideration is given to testing and measurement, integrated optics for fiber-optic systems, optical interconnect technology, and optical computing.

Navigating Difference through Multicultural Service Learning

ERIC Educational Resources Information Center

Pasquesi, Kira

2013-01-01

This chapter explores the design and implementation of service learning as a multicultural initiative. The author shares considerations for multicultural service-learning practice using an example from a course project focused on leadership skill development in public service.

Hypnosis in the Treatment of Depression: Considerations in Research Design and Methods

PubMed Central

McCann, Barbara S.; Landes, Sara J.

2010-01-01

Depressive disorders constitute a serious problem in the United States. The appearance of practice guidelines and lists of evidenced based therapies suggests that adequate treatments for depression exist. However, a careful consideration of what we do and do not know about the treatment of depression leaves plenty of room for improved approaches to addressing this condition. Although there has been a dearth of research on the treatment of depression using hypnosis, there are several compelling arguments for the inclusion of hypnotic approaches in the array of strategies for dealing with depression. However, traditional “gold standard” research methods, namely randomized controlled trials (RCTs) have many potential shortcomings for identifying the potential impact of hypnosis on depression. Other strategies, notably single-case design and benchmarking approaches, may offer a more practical solution to the problem of determining “what works for depression.” PMID:20390688

Discussion of the Design and Implementation of the Lauder Content-Based Curriculum: Practical and Theoretical Considerations.

ERIC Educational Resources Information Center

Cowles, Maria Antonia

The dual-degree MBA/MA program of the University of Pennsylvania is described. The program is designed to provide future business leaders with superior international management education and prepare them to operate effectively and comfortably in the global economy through social and professional language skills and knowledge of diverse cultural…

Identifying Governance Best Practices in Systems-of-Systems Acquisition

DTIC Science & Technology

2014-02-08

Acquisition Governance ................................................ 28  Figure 3.  Harvest Hercules Airborne Weapons Kit System Components ...... 39 ...acquisition poses considerable challenges that the current Department of Defense (DoD) acquisition governance structure was not necessarily designed to...specify the warship it needed along with the design , construction, and outfitting of the ship. The Navy managed and performed production operations and

Design Considerations of a Compounded Sterile Preparations Course

PubMed Central

Petraglia, Christine; Mattison, Melissa J.

2016-01-01

Objective. To design a comprehensive learning and assessment environment for the practical application of compounded sterile preparations using a constructivist approach. Design. Compounded Sterile Preparations Laboratory is a required 1-credit course that builds upon the themes of training aseptic technique typically used in health system settings and threads application of concepts from other courses in the curriculum. Students used critical-thinking skills to devise appropriate strategies to compound sterile preparations. Assessment. Aseptic technique skills were assessed with objective, structured, checklist-based rubrics. Most students successfully completed practical assessments using appropriate technique (mean assessment grade=83.2%). Almost all students passed the practical media fill (98%) and gloved fingertip sampling (86%) tests on the first attempt; all passed on the second attempt. Conclusion. Employing a constructivist scaffold approach to teaching proper hygiene and aseptic technique prepared students to pass media fill and gloved fingertip tests and to perform well on practical compounding assessments. PMID:26941438

Therapeutic touch: is there a scientific basis for the practice?

PubMed

Clark, P E; Clark, M J

1984-01-01

The research-related literature on the topic of therapeutic touch is critically reviewed. The purpose of the review is to explore the current scientific basis for the teaching and practice of therapeutic touch as a treatment modality. An examination of published research literature indicates that empirical support for the practice of therapeutic touch is, at best, weak. The results of well-designed, double-blind studies have been transient, of no significance, or are in need of independent replication. Current practice of therapeutic touch is empirically little more than practice of placebo. Considerations for further nursing research are also presented.

A person-centered approach to study intimacy and sexuality in residential care facility (RCF) clients with dementia: Methodological considerations and a guide to study design.

PubMed

Roelofs, Tineke S M; Luijkx, Katrien G; Embregts, Petri J C M

2017-01-01

The person-centered perspective of residential care facility (RCF) residents with dementia with regard to their intimate and sexual lives is largely neglected in research. We aim to provide methodological considerations and reflections on a performed qualitative study. Recommendations and a guide to study design are provided to inform and encourage future research on the inclusion of people with dementia as participants. Methodological recommendations and reflections are described in chronological order of the procedure. Fragments of interviews are included for further illustration and clarification. Considering preparation, close involvement of clinical practice, and extensive deliberation regarding study design tended to be important. Considering procedure, investment in contacts with clinical practice and authorized representatives; an introduction meeting; person-centered inclusion and consent; profound skills in interviewing participants with dementia; and flexibility in data collection were proven of importance. Considering data analysis and study quality, including field notes and aiming at a balance between study quality and practicability to enhance study 'rigor' were found important. Including the person-centered perspective in research on intimacy and sexuality of RCF residents with dementia, is challenging and takes a flexible and creative approach. It is, however, worthwhile to close the gap in literature.

Welcoming Blue-Collar Scholars into the Ivory Tower: Developing Class-Conscious Strategies for Student Success. Series on Special Student Populations

ERIC Educational Resources Information Center

Soria, Krista M.

2015-01-01

"Welcoming Blue-Collar Scholars Into the Ivory Tower" is the first volume in a new book series designed to explore how institutional policies, practices, and cultures shape learning, development, and success for students who have been historically underserved or given limited consideration in the design of higher education contexts.…

Engine System Loads Development for the Fastrac 60K Flight Engine

NASA Technical Reports Server (NTRS)

Frady, Greg; Christensen, Eric R.; Mims, Katherine; Harris, Don; Parks, Russell; Brunty, Joseph

2000-01-01

Early implementation of structural dynamics finite element analyses for calculation of design loads is considered common design practice for high volume manufacturing industries such as automotive and aeronautical industries. However, with the rarity of rocket engine development programs starts, these tools are relatively new to the design of rocket engines. In the new Fastrac engine program, the focus has been to reduce the cost to weight ratio; current structural dynamics analysis practices were tailored in order to meet both production and structural design goals. Perturbation of rocket engine design parameters resulted in a number of Fastrac load cycles necessary to characterize the impact due to mass and stiffness changes. Evolution of loads and load extraction methodologies, parametric considerations and a discussion of load path sensitivities are discussed.

Racializing drug design: implications of pharmacogenomics for health disparities.

PubMed

Lee, Sandra Soo-Jin

2005-12-01

Current practices of using "race" in pharmacogenomics research demands consideration of the ethical and social implications for understandings of group difference and for efforts to eliminate health disparities. This discussion focuses on an "infrastructure of racialization" created by current trajectories of research on genetic differences among racially identified groups, the use of race as a proxy for risk in clinical practice, and increasing interest in new market niches by the pharmaceutical industry. The confluence of these factors has resulted in the conflation of genes, disease, and race. I argue that public investment in pharmacogenomics requires careful consideration of current inequities in health status and social and ethical concerns over reifying race and issues of distributive justice.

Designing Solar Data Archives: Practical Considerations

NASA Astrophysics Data System (ADS)

Messerotti, M.

The variety of new solar observatories in space and on the ground poses the stringent problem of an efficient storage and archiving of huge datasets. We briefly address some typical architectures and consider the key point of data access and distribution through networking.

SAMPLE DESIGN CONSIDERATIONS FOR INDOOR AIR EXPOSURE SURVEYS

EPA Science Inventory

Recent studies have shown that the traditional practice of monitoring outdoor (ambient) air quality leads to little information regarding the exposures of people in indoor surroundings. Consequently, EPA has begun a series of studies to determine the air pollution exposures peopl...

Design of a Single Motor Based Leg Structure with the Consideration of Inherent Mechanical Stability

NASA Astrophysics Data System (ADS)

Taha Manzoor, Muhammad; Sohail, Umer; Noor-e-Mustafa; Nizami, Muhammad Hamza Asif; Ayaz, Yasar

2017-07-01

The fundamental aspect of designing a legged robot is constructing a leg design that is robust and presents a simple control problem. In this paper, we have successfully designed a robotic leg based on a unique four bar mechanism with only one motor per leg. The leg design parameters used in our platform are extracted from design principles used in biological systems, multiple iterations and previous research findings. These principles guide a robotic leg to have minimal mechanical passive impedance, low leg mass and inertia, a suitable foot trajectory utilizing a practical balance between leg kinematics and robot usage, and the resultant inherent mechanical stability. The designed platform also exhibits the key feature of self-locking. Theoretical tools and software iterations were used to derive these practical features and yield an intuitive sense of the required leg design parameters.

Heat sink structural design concepts for a hypersonic research airplane

NASA Technical Reports Server (NTRS)

Taylor, A. H.; Jackson, L. R.

1977-01-01

Hypersonic research aircraft design requires careful consideration of thermal stresses. This paper relates some of the problems in a heat sink structural design that can be avoided by appropriate selection of design options including material selection, design concepts, and load paths. Data on several thermal loading conditions are presented on various conventional designs including bulkheads, longerons, fittings, and frames. Results indicate that conventional designs are inadequate and that acceptable designs are possible by incorporating innovative design practices. These include nonintegral pressure compartments, ball-jointed links to distribute applied loads without restraining the thermal expansion, and material selections based on thermal compatibility.

Single-case research design in pediatric psychology: considerations regarding data analysis.

PubMed

Cohen, Lindsey L; Feinstein, Amanda; Masuda, Akihiko; Vowles, Kevin E

2014-03-01

Single-case research allows for an examination of behavior and can demonstrate the functional relation between intervention and outcome in pediatric psychology. This review highlights key assumptions, methodological and design considerations, and options for data analysis. Single-case methodology and guidelines are reviewed with an in-depth focus on visual and statistical analyses. Guidelines allow for the careful evaluation of design quality and visual analysis. A number of statistical techniques have been introduced to supplement visual analysis, but to date, there is no consensus on their recommended use in single-case research design. Single-case methodology is invaluable for advancing pediatric psychology science and practice, and guidelines have been introduced to enhance the consistency, validity, and reliability of these studies. Experts generally agree that visual inspection is the optimal method of analysis in single-case design; however, statistical approaches are becoming increasingly evaluated and used to augment data interpretation.

Endoscopic vs. Surgical Interventions for Painful Chronic Pancreatitis: What is Needed for Future Clinical Trials

PubMed Central

Windsor, John A; Reddy, Nageshwar D

2017-01-01

The treatment of painful chronic pancreatitis remains controversial. The available evidence from two randomized controlled trials favor surgical intervention, whereas an endotherapy-first approach is widely practiced. Chronic pancreatitis is complex disease with different genetic and environmental factors, different pain mechanisms and different treatment modalities including medical, endoscopic, and surgical. The widely practiced step-up approach remains unproven. In designing future clinical trials there are some important pre-requisites including a more comprehensive pain assessment tool, the optimization of conservative medical treatment and interventional techniques. Consideration should be given to the need of a control arm and the optimal timing of intervention. Pending better designed studies, the practical way forward is to identify subgroups of patients who clearly warrant endotherapy or surgery first, and to design the future clinical trials for the remainder. PMID:28079861

NUTRIENT-BASED ECOLOGICAL CONSIDERATIONS FOR STORMWATER MANAGEMENT BASINS: PONDS AND WETLANDS

EPA Science Inventory

The effects of stormwater pond and wetland best management practice (BMP) designs on phosphorus and nitrogen concentrations in effluent were considered using extant data and experimental observations from pond and wetland mesocosms. Relative difference between BMP types were eva...

NUTRIENT-BASED ECOLOGICAL CONSIDERATIONS FOR STORMWATER MANAGEMENT BASINS: PONDS AND WETLANDS (PRESENTATION)

EPA Science Inventory

The effects of stormwater pond and wetland best management practice (BMP) designs on phosphorus and nitrogen concentrations in effluent were considered using extant data and experimental observations from pond and wetland mesocosms. Relative difference between BMP types were eva...

Automatic Query Formulations in Information Retrieval.

ERIC Educational Resources Information Center

Salton, G.; And Others

1983-01-01

Introduces methods designed to reduce role of search intermediaries by generating Boolean search formulations automatically using term frequency considerations from natural language statements provided by system patrons. Experimental results are supplied and methods are described for applying automatic query formulation process in practice.…

Educational Neuroscience: Neuroethical Considerations

ERIC Educational Resources Information Center

Lalancette, Helene; Campbell, Stephen R.

2012-01-01

Research design and methods in educational neuroscience involve using neuroscientific tools such as brain image technologies to investigate cognitive functions and inform educational practices. The ethical challenges raised by research in social neuroscience have become the focus of neuroethics, a sub-discipline of bioethics. More specifically…

Teaching Computer Applications.

ERIC Educational Resources Information Center

Lundgren, Carol A.; And Others

This document, which is designed to provide classroom teachers at all levels with practical ideas for a computer applications course, examines curricular considerations, teaching strategies, delivery techniques, and assessment methods applicable to a course focusing on applications of computers in business. The guide is divided into three…

Special Features of Using Secondary Materials in the Interior Design of Public Dining Establishments

NASA Astrophysics Data System (ADS)

Kuznetsova, Irina; Hapchuk, Olena; Lukinov, Vitaly

2017-10-01

This article analyses the latest publications studying the use and practical application of secondary resources as raw materials in design. This analysis is based on the list of secondary resources and their applications in interior decoration. In particular, the interiors of public catering enterprises were analysed. Restaurants with different functional purposes that were classified into several categories with specific peculiarities of interior design were identified. This article presents and describes different types of public catering enterprises based on those categories. The interior design of a public catering enterprise is regarded as a considerably complex system. Different types of secondary materials were reviewed to identify the most frequently used materials for interior space design. This article describes the main peculiarities of the use of secondary materials and presents examples of their practical application. The function of secondary materials in the interior design of public catering enterprises were detected and reviewed. On the basis of the analysis, several directions for the practical application of our results in the field of public catering enterprise design were suggested.

A study of microwave downcoverters operating in the K sub u band

NASA Technical Reports Server (NTRS)

Fellers, R. G.; Simpson, T. L.; Tseng, B.

1982-01-01

A computer program for parametric amplifier design is developed with special emphasis on practical design considerations for microwave integrated circuit degenerate amplifiers. Precision measurement techniques are developed to obtain a more realistic varactor equivalent circuit. The existing theory of a parametric amplifier is modified to include the equivalent circuit, and microwave properties, such as loss characteristics and circuit discontinuities are investigated.

GN&C Engineering Best Practices for Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2007-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

GN&C Engineering Best Practices for Human-Rated Spacecraft System

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2008-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

GN&C Engineering Best Practices For Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2007-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

Symptom Management & Quality of Life Concept Design | Division of Cancer Prevention

Cancer.gov

This video covers a variety of practical considerations for developing a symptom management concept for clinical research. Co-sponsored by the National Cancer Institute Symptom Management and Health Related Quality of Life Steering Committee & the International Society for Quality of Life Research. |

CONSIDERATION IN THE DESIGN OF TREATMENT BEST MANAGEMENT PRACTICES (BMPS) TO IMPROVE WATER QUALITY

EPA Science Inventory

For the past three decades, municipalities in the United States have successfully addressed pollution in the watershed by collecting and treating their wastewater. Currently, all municipalities provide secondary level treatment, and in some cases tertiary treatment, and industri...

Integrating Sensor Monitoring Technology into the Current Air Pollution Regulatory Support Paradigm: Practical Considerations

EPA Science Inventory

The US Environmental Protection Agency (EPA) along with state, local, and tribal governments operate Federal Reference Method (FRM) and Federal Equivalent Method (FEM) instruments to assess compliance with US air pollution standards designed to protect human and ecosystem health....

Social research design: framework for integrating philosophical and practical elements.

PubMed

Cunningham, Kathryn Burns

2014-09-01

To provide and elucidate a comprehensible framework for the design of social research. An abundance of information exists concerning the process of designing social research. The overall message that can be gleaned is that numerable elements - both philosophical (ontological and epistemological assumptions and theoretical perspective) and practical (issue to be addressed, purpose, aims and research questions) - are influential in the process of selecting a research methodology and methods, and that these elements and their inter-relationships must be considered and explicated to ensure a coherent research design that enables well-founded and meaningful conclusions. There is a lack of guidance concerning the integration of practical and philosophical elements, hindering their consideration and explication. The author's PhD research into loneliness and cancer. This is a methodology paper. A guiding framework that incorporates all of the philosophical and practical elements influential in social research design is presented. The chronological and informative relationships between the elements are discussed. The framework presented can be used by social researchers to consider and explicate the practical and philosophical elements influential in the selection of a methodology and methods. It is hoped that the framework presented will aid social researchers with the design and the explication of the design of their research, thereby enhancing the credibility of their projects and enabling their research to establish well-founded and meaningful conclusions.

Design Development Test and Evaluation (DDT and E) Considerations for Safe and Reliable Human Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Miller, James; Leggett, Jay; Kramer-White, Julie

2008-01-01

A team directed by the NASA Engineering and Safety Center (NESC) collected methodologies for how best to develop safe and reliable human rated systems and how to identify the drivers that provide the basis for assessing safety and reliability. The team also identified techniques, methodologies, and best practices to assure that NASA can develop safe and reliable human rated systems. The results are drawn from a wide variety of resources, from experts involved with the space program since its inception to the best-practices espoused in contemporary engineering doctrine. This report focuses on safety and reliability considerations and does not duplicate or update any existing references. Neither does it intend to replace existing standards and policy.

Racializing Drug Design: Implications of Pharmacogenomics for Health Disparities

PubMed Central

Lee, Sandra Soo-Jin

2005-01-01

Current practices of using “race” in pharmacogenomics research demands consideration of the ethical and social implications for understandings of group difference and for efforts to eliminate health disparities. This discussion focuses on an “infrastructure of racialization” created by current trajectories of research on genetic differences among racially identified groups, the use of race as a proxy for risk in clinical practice, and increasing interest in new market niches by the pharmaceutical industry. The confluence of these factors has resulted in the conflation of genes, disease, and race. I argue that public investment in pharmacogenomics requires careful consideration of current inequities in health status and social and ethical concerns over reifying race and issues of distributive justice. PMID:16257939

Specifications of a continual reassessment method design for phase I trials of combined drugs†

PubMed Central

Wages, Nolan A.; Conaway, Mark R.

2013-01-01

In studies of combinations of agents in phase I oncology trials, the dose–toxicity relationship may not be monotone for all combinations, in which case the toxicity probabilities follow a partial order. The continual reassessment method for partial orders (PO-CRM) is a design for phase I trials of combinations that leans upon identifying possible complete orders associated with the partial order. This article addresses some practical design considerations not previously undertaken when describing the PO-CRM. We describe an approach in choosing a proper subset of possible orderings, formulated according to the known toxicity relationships within a matrix of combination therapies. Other design issues, such as working model selection and stopping rules, are also discussed. We demonstrate the practical ability of PO-CRM as a phase I design for combinations through its use in a recent trial designed at the University of Virginia Cancer Center. PMID:23729323

Changes in Educational Practices: A Multiple Case Study Investigating Faculty Implemented Changes in Educational Practices Designed to Meet the Academic Needs of the Contemporary Student at a Southwestern Community College

ERIC Educational Resources Information Center

Tompkins, David K.

2017-01-01

For the past few decades, the trend of first generation low-economic status community college students, considerably comprised of immigrants, has continued to grow at a significant rate (Connell, 2008; Ray, 2013; Kim & Diaz, 2013c; Kim, 2014). Community colleges are encountering challenges that were previously viewed as minimal or secondary to…

Understanding Digital Note-Taking Practice for Visualization.

PubMed

Willett, Wesley; Goffin, Pascal; Isenberg, Petra

2015-05-13

We present results and design implications from a study of digital note-taking practice to examine how visualization can support revisitation, reflection, and collaboration around notes. As digital notebooks become common forms of external memory, keeping track of volumes of content is increasingly difficult. Information visualization tools can help give note-takers an overview of their content and allow them to explore diverse sets of notes, find and organize related content, and compare their notes with their collaborators. To ground the design of such tools, we conducted a detailed mixed-methods study of digital note-taking practice. We identify a variety of different editing, organization, and sharing methods used by digital note-takers, many of which result in notes becoming "lost in the pile''. These findings form the basis for our design considerations that examine how visualization can support the revisitation, organization, and sharing of digital notes.

Human Factors Design Principles for Instrument Approach Procedure Charts. Volume 1. Readability

DTIC Science & Technology

1992-08-01

discovery of mechanical type (Spencer, 1969). Not surprisingly, there is a substantial body of research and accepted practice that addresses...Swey for Automotive Engieer ARP4032 (April, 1988). Human engineering considerations in the application of cobr to electronic aircmjl dLspkp. Warrenlale

Private Industry and the Family.

ERIC Educational Resources Information Center

Autry, James A.

1980-01-01

Discusses recent changes in industry practices designed to make worklife more accommodating to family life. Cites examples of companies which are establishing new work schedules (flex-time, four-day weeks), providing counseling services and day care, and giving increased consideration to family impact when making job transfer decisions. (SJL)

Advancing High-Quality Literacy Research in Juvenile Justice: Methodological and Practical Considerations

ERIC Educational Resources Information Center

Houchins, David E.; Jolivette, Kristine; Shippen, Margaret E.; Lambert, Richard

2010-01-01

Special education researchers have made noteworthy progress toward conceptualizing literacy research questions, designing quality studies, and disseminating the results of their research. These advancements have been made through the establishment and refinement of quality research indicators. Unfortunately, this progress has mostly eluded the…

Mindfulness in Academia: Considerations for Administrative Preparation

ERIC Educational Resources Information Center

Wells, Caryn M.

2013-01-01

This conceptual paper presents a synthesis of information about the workload stress of educational administrators. Currently, there are few programs designed to assist educational leaders to deal with stress (Hawk & Martin, 2011). Stress reduction programs may include mindfulness, a widely used practice of meditation. Mindfulness is used in…

College Online Peer Tutor Training.

ERIC Educational Resources Information Center

Blankenburg, Juele; Kariotis, Georgia

This paper describes the development of a college online tutor training course at Oakton Community College (Illinois) that attempted to solve the difficulties of training without a loss of effective practice. The online designers had two special considerations in course construction: maintaining the pedagogical soundness of the course modules and…

A high resolution cavity BPM for the CLIC Test Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chritin, N.; Schmickler, H.; Soby, L.

2010-08-01

In frame of the development of a high resolution BPM system for the CLIC Main Linac we present the design of a cavity BPM prototype. It consists of a waveguide loaded dipole mode resonator and a monopole mode reference cavity, both operating at 15 GHz, to be compatible with the bunch frequencies at the CLIC Test Facility. Requirements, design concept, numerical analysis, and practical considerations are discussed.

Guidelines and Capabilities for Designing Human Missions

NASA Technical Reports Server (NTRS)

Allen, Christopher S.; Burnett, Rebeka; Charles, John; Cucinotta, Frank; Fullerton, Richard; Goodman, Jerry R.; Griffith, Anthony D., Sr.; Kosmo, Joseph J.; Perchonok, Michele; Railsback, Jan;

Transverse Shear Stiffness of T300/5208 Graphite-Epoxy in Simple Bending

DTIC Science & Technology

1981-11-30

proprietary, design , use, sole, manufacturing and reproduction rights thereto. Information contained in this Ireport must not be used for sales promotion or...accordance with published re- sults of ultrasonic tests.I nkLockhteed -CamY1Mw CoMaWY vii I 1 LR 29763 I I INTRODUCTION In the design and analysis of metal...aluminum alloy, and the adverse effects of shearing I defcrmation will require consideration in many practical applications of advanced design . Reference

Commentary: considerations for using the 'Trials within Cohorts' design in a clinical trial of an investigational medicinal product.

PubMed

Bibby, Anna C; Torgerson, David J; Leach, Samantha; Lewis-White, Helen; Maskell, Nick A

2018-01-08

The 'trials within cohorts' (TwiC) design is a pragmatic approach to randomised trials in which trial participants are randomly selected from an existing cohort. The design has multiple potential benefits, including the option of conducting multiple trials within the same cohort. To date, the TwiC design methodology been used in numerous clinical settings but has never been applied to a clinical trial of an investigational medicinal product (CTIMP). We have recently secured the necessary approvals to undertake the first CTIMP using the TwiC design. In this paper, we describe some of the considerations and modifications required to ensure such a trial is compliant with Good Clinical Practice and international clinical trials regulations. We advocate using a two-stage consent process and using the consent stages to explicitly differentiate between trial participants and cohort participants who are providing control data. This distinction ensured compliance but had consequences with respect to costings, recruitment and the trial assessment schedule. We have demonstrated that it is possible to secure ethical and regulatory approval for a CTIMP TwiC. By including certain considerations at the trial design stage, we believe this pragmatic and efficient methodology could be utilised in other CTIMPs in future.

Web-based assessments of physical activity in youth: considerations for design and scale calibration.

PubMed

Saint-Maurice, Pedro F; Welk, Gregory J

2014-12-01

This paper describes the design and methods involved in calibrating a Web-based self-report instrument to estimate physical activity behavior. The limitations of self-report measures are well known, but calibration methods enable the reported information to be equated to estimates obtained from objective data. This paper summarizes design considerations for effective development and calibration of physical activity self-report measures. Each of the design considerations is put into context and followed by a practical application based on our ongoing calibration research with a promising online self-report tool called the Youth Activity Profile (YAP). We first describe the overall concept of calibration and how this influences the selection of appropriate self-report tools for this population. We point out the advantages and disadvantages of different monitoring devices since the choice of the criterion measure and the strategies used to minimize error in the measure can dramatically improve the quality of the data. We summarize strategies to ensure quality control in data collection and discuss analytical considerations involved in group- vs individual-level inference. For cross-validation procedures, we describe the advantages of equivalence testing procedures that directly test and quantify agreement. Lastly, we introduce the unique challenges encountered when transitioning from paper to a Web-based tool. The Web offers considerable potential for broad adoption but an iterative calibration approach focused on continued refinement is needed to ensure that estimates are generalizable across individuals, regions, seasons and countries.

Online interprofessional health sciences education: From theory to practice.

PubMed

Luke, Robert; Solomon, Patty; Baptiste, Sue; Hall, Pippa; Orchard, Carole; Rukholm, Ellen; Carter, Lorraine

2009-01-01

Online learning (e-learning) has a nascent but established history. Its application to interprofessional education (IPE), however, is relatively new. Over the past 2 decades the Internet has been used increasingly to mediate education. We have come past the point of "should we use the Internet for education" to "how should we use the Internet for education." Research has begun on the optimal development of online learning environments to support IPE. Developing online IPE should follow best practices in e-learning generally, though there are some special considerations for acknowledging the interprofessional context and clinical environments that online IPE is designed to support. The design, development, and deployment of effective online IPE must therefore pay special attention to the particular constraints of the health care worker educational matrix, both pre- and postlicensure. In this article we outline the design of online, interprofessional health sciences education. Our work has involved 4 educational and 4 clinical service institutions. We establish the context in which we situate our development activities that created learning modules designed to support IPE and its transfer into new interprofessional health care practices. We illustrate some best practices for the design of effective online IPE, and show how this design can create effective learning for IPE. Challenges exist regarding the full implementation of interprofessional clinical practice that are beginning to be met by coordinated efforts of multiple health care education silos.

Good practices and health policy analysis in European sports stadia: results from the 'Healthy Stadia' project.

PubMed

Drygas, Wojciech; Ruszkowska, Joanna; Philpott, Matthew; Björkström, Olav; Parker, Mike; Ireland, Robin; Roncarolo, Federico; Tenconi, Maria

2013-06-01

Sport plays an important role within society and sports stadia provide significant settings for public health strategies. In addition to being places of mass gathering, stadia are often located in less affluent areas and are traditionally attended by 'harder to reach' communities. Unfortunately sports stadia and the clubs they host are rarely perceived as places that promote healthy lifestyles. Fast food, alcohol and tobacco are commonly advertized, served and consumed during sports games giving the spectators and TV fans contradictory messages concerning healthy choices. As part of a wider programme of work part-funded by the European Union, a study was therefore designed to explore current 'good practice' relating to positive health interventions in sports stadia across a number of European countries. Using a specially designed questionnaire, information about health policies and good practices relating to food offerings in stadia, physical activity promotion among local communities, tobacco policy, positive mental health initiatives, environmental sustainability practices and social responsibility policies were collected in 10 European countries (England and Northern Ireland, Finland, Georgia, Greece, Ireland, Italy, Latvia, Poland, Spain and Sweden) involving 88 stadia. The audit results show that stadia health policies differ considerably between specific countries and sports. Based on the literature analysed, the examples of good practices collected through the study, and the subsequent instigation of a European Healthy Stadia Network, it shows that there is considerable potential for stadia to become health promoting settings.

How to Tell Time by the Big Dipper

ERIC Educational Resources Information Center

Wahl, M. Stoessel

1978-01-01

Asserting that the skills required to tell time by the Big Dipper necessitate both considerable classroom preparation and outdoor practice, this article is designed to help teachers and students prepare for both. Written for students at the fourth grade level, this article includes simple instructions and illustrations. (JC)

Elections: Secondary Teaching Activities in the Participation Series.

ERIC Educational Resources Information Center

Schultz, John; Taft-Morales, Hugh

One of a series of teacher-developed curriculum guides designed to encourage student participation and involvement in important social issues, this secondary level guide helps 7th through 12th grade English and social studies educators teach about the election process. An introductory section suggests practical considerations, means of enlisting…

Policy, Systems, and Environmental Change in the Mississippi Delta: Considerations for Evaluation Design

ERIC Educational Resources Information Center

Kegler, Michelle C.; Honeycutt, Sally; Davis, Melvin; Dauria, Emily; Berg, Carla; Dove, Cassandra; Gamble, Abigail; Hawkins, Jackie

2015-01-01

Community-level policy, systems, and environmental (PSE) change strategies may offer an economical and sustainable approach to chronic disease prevention. The rapidly growing number of untested but promising PSE strategies currently underway offers an exciting opportunity to establish practice-based evidence for this approach. This article…

What Can K-12 School Leaders Learn from Video Games and Gaming?

ERIC Educational Resources Information Center

Halverson, Richard

2005-01-01

Schools have much to learn from video games and the gaming community. By providing compelling activities for motivating otherwise indifferent learners, video games can potentially help teachers improve the design of learning environments. However, there are considerable rhetorical and practical barriers between the schooling and gaming communities…

Business/Clerical/Sales. Career Education Guide.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC. European Area.

The curriculum guide is designed to provide students with realistic training in business/clerical/sales theory and practices within the secondary educational framework and to prepare them for entry into an occupation or continuing postsecondary education. Each unit plan consists of a description of the area under consideration, estimated hours of…

Interactive Videodisc: the "Why" and the "How." CALICO Monograph Volume 2, Spring 1991.

ERIC Educational Resources Information Center

Bush, Michael D.; And Others

This monograph presents articles on interactive videodisc technology in language learning, ranging from the importance of a theoretical framework, the transition from theory to practice, getting started, design considerations, hypermedia, discovery environments, authoring software, workstation environments, and a look at the future of optical disc…

Applying Synchronous Computer-Mediated Communication into Course Design: Some Considerations and Practical Guides

ERIC Educational Resources Information Center

Olaniran, Bolanle A.

2006-01-01

Purpose: The increased pressure to incorporate communication technologies into learning environments has intensified the attention given to the role of computer-mediated communication (CMC) in academic settings. However, the issue of how and why these technologies, especially synchronous CMC applications, has been given less attention in…

Do We Need to Design Course-Based Undergraduate Research Experiences for Authenticity?

ERIC Educational Resources Information Center

Rowland, Susan; Pedwell, Rhianna; Lawrie, Gwen; Lovie-Toon, Joseph; Hung, Yu

2016-01-01

The recent push for more authentic teaching and learning in science, technology, engineering, and mathematics indicates a shared agreement that undergraduates require greater exposure to professional practices. There is considerable variation, however, in how "authentic" science education is defined. In this paper we present our…

Recruiting Youth in the College Market: Current Practices and Future Policy Options.

ERIC Educational Resources Information Center

Kilburn, M. Rebecca, Ed.; Asch, Beth J., Ed.

This publication explores the enlistment potential of college-market youth by examining the characteristics of the college-market population and the implications of these characteristics for designing effective recruiting policies. Chapter 1, "Introduction: Trends and Theoretical Considerations" (M. Rebecca Kilburn, Beth J. Asch),…

Security Standards and Best Practice Considerations for Quantum Key Distribution (QKD)

DTIC Science & Technology

2012-03-01

SECURITY STANDARDS AND BEST PRACTICE CONSIDERATIONS FOR QUANTUM KEY DISTRIBUTION (QKD) THESIS...protection in the United States. AFIT/GSE/ENV/12-M05 SECURITY STANDARDS AND BEST PRACTICE CONSIDERATIONS FOR QUANTUM KEY DISTRIBUTION (QKD...FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. AFIT/GSE/ENV/12-M05 SECURITY STANDARDS AND BEST PRACTICE CONSIDERATIONS FOR QUANTUM KEY

Recruiting medical students to rural practice

PubMed Central

Jutzi, Leah; Vogt, Kelly; Drever, Erin; Nisker, Jeff

2009-01-01

ABSTRACT OBJECTIVE To explore the strategies used by rural recruitment programs and their perceived influence on medical students. DESIGN Two original questionnaires delivered electronically, one to medical students and the other to recruiters in rural Ontario communities. SETTING Ontario, Canada. PARTICIPANTS All 525 medical students enrolled in the Schulich School of Medicine & Dentistry at the University of Western Ontario in London and physician recruiters in 71 rural communities in Ontario were invited to participate in the study. MAIN OUTCOME MEASURES The factors that influence medical students to consider rural practice, strategies used by recruiters, and student perceptions of the ethical appropriateness of both. RESULTS The questionnaire was completed by 42.1% of medical students. Lifestyle considerations were an important influence for 93.1% of students. Themes from the qualitative analysis included the ethical appropriateness of financial considerations, economic forces, perceived disadvantages of rural practice, competition between communities, and lack of altruism. Responses were received from recruiters in 43.7% of communities; of those, 92.9% offered financial incentives to attract prospective physicians. CONCLUSION Financial and lifestyle considerations are important influences on medical students’ choice to practise in rural communities. Most medical students felt incentive programs offered by rural communities were ethically appropriate. PMID:19155375

Making communities safer from crime: An undervalued element in impact assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glasson, John, E-mail: jglasson@brookes.ac.u; Curtin University, Perth; Cozens, Paul

Crime and safety are significant issues for individuals, communities and businesses but they have tended to be undervalued elements in the consideration of social impacts in impact assessment theory and practice. It has been argued that crime is a form of pollution and an externality of development. In principle, the precautionary impact assessment family of approaches should be very useful here. The paper explores first the coverage of crime and safety issues in both the longer history of EIA, followed by the much shorter history of SEA and Sustainability Appraisal (SA). It then considers several key issues for advancing bettermore » practice. These include: the recognition of the lifecycles of projects and plans and the relevant dimensions of the local safety and crime baseline; the need to employ meaningful data, including 'fear of crime' considerations; and the consideration of innovative approaches to the use of indicators. Evidence and theories from the field of environmental criminology are presented as crucial to understanding crime and its association with land-use. The paper concludes with an exploration of appropriate mitigation measures for anticipating and designing out crime. Examples draw in particular on evolving practice in the UK and Australia.« less

A review of mammalian carcinogenicity study design and potential effects of alternate test procedures on the safety evaluation of food ingredients.

PubMed

Hayes, A W; Dayan, A D; Hall, W C; Kodell, R L; Williams, G M; Waddell, W D; Slesinski, R S; Kruger, C L

2011-06-01

Extensive experience in conducting long term cancer bioassays has been gained over the past 50 years of animal testing on drugs, pesticides, industrial chemicals, food additives and consumer products. Testing protocols for the conduct of carcinogenicity studies in rodents have been developed in Guidelines promulgated by regulatory agencies, including the US EPA (Environmental Protection Agency), the US FDA (Food and Drug Administration), the OECD (Organization for Economic Co-operation and Development) for the EU member states and the MAFF (Ministries of Agriculture, Forestries and Fisheries) and MHW (Ministry of Health and Welfare) in Japan. The basis of critical elements of the study design that lead to an accepted identification of the carcinogenic hazard of substances in food and beverages is the focus of this review. The approaches used by entities well-known for carcinogenicity testing and/or guideline development are discussed. Particular focus is placed on comparison of testing programs used by the US National Toxicology Program (NTP) and advocated in OECD guidelines to the testing programs of the European Ramazzini Foundation (ERF), an organization with numerous published carcinogenicity studies. This focus allows for a good comparison of differences in approaches to carcinogenicity testing and allows for a critical consideration of elements important to appropriate carcinogenicity study designs and practices. OECD protocols serve as good standard models for carcinogenicity testing protocol design. Additionally, the detailed design of any protocol should include attention to the rationale for inclusion of particular elements, including the impact of those elements on study interpretations. Appropriate interpretation of study results is dependent on rigorous evaluation of the study design and conduct, including differences from standard practices. Important considerations are differences in the strain of animal used, diet and housing practices, rigorousness of test procedures, dose selection, histopathology procedures, application of historical control data, statistical evaluations and whether statistical extrapolations are supported by, or are beyond the limits of, the data generated. Without due consideration, there can be result conflicting data interpretations and uncertainty about the relevance of a study's results to human risk. This paper discusses the critical elements of rodent (rat) carcinogenicity studies, particularly with respect to the study of food ingredients. It also highlights study practices and procedures that can detract from the appropriate evaluation of human relevance of results, indicating the importance of adherence to international consensus protocols, such as those detailed by OECD. Copyright © 2010. Published by Elsevier Inc.

Focusing the Sun: State Considerations for Designing Community Solar Policy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Jeffrey J; Shah, Monisha R

This report summarizes outcomes from the National Community Solar Partnership State Best Practices working group by identifying key differences in state policies that enable community solar and illustrating how various policy design approaches may impact the market. For the latter question, it is too early to quantify a relationship between policy design and market impacts, because most state programs have not been fully implemented. So, the authors conducted interviews with 19 subject matter experts, including project developers, regulators, and utilities to better understand how various policy design approaches may impact community solar markets. These perspectives, along with those gleaned frommore » the working group and relevant literature were synthesized to identify key considerations for policymakers designing community solar programs. Though state community solar policies vary in numerous ways, the report focuses on the following critical elements: program cap, project size cap, subscriber location requirements, subscriber eligibility requirements, low- and moderate-income stipulations, and subscriber compensation.« less

Participatory design of probability-based decision support tools for in-hospital nurses.

PubMed

Jeffery, Alvin D; Novak, Laurie L; Kennedy, Betsy; Dietrich, Mary S; Mion, Lorraine C

2017-11-01

To describe nurses' preferences for the design of a probability-based clinical decision support (PB-CDS) tool for in-hospital clinical deterioration. A convenience sample of bedside nurses, charge nurses, and rapid response nurses (n = 20) from adult and pediatric hospitals completed participatory design sessions with researchers in a simulation laboratory to elicit preferred design considerations for a PB-CDS tool. Following theme-based content analysis, we shared findings with user interface designers and created a low-fidelity prototype. Three major themes and several considerations for design elements of a PB-CDS tool surfaced from end users. Themes focused on "painting a picture" of the patient condition over time, promoting empowerment, and aligning probability information with what a nurse already believes about the patient. The most notable design element consideration included visualizing a temporal trend of the predicted probability of the outcome along with user-selected overlapping depictions of vital signs, laboratory values, and outcome-related treatments and interventions. Participants expressed that the prototype adequately operationalized requests from the design sessions. Participatory design served as a valuable method in taking the first step toward developing PB-CDS tools for nurses. This information about preferred design elements of tools that support, rather than interrupt, nurses' cognitive workflows can benefit future studies in this field as well as nurses' practice. Published by Oxford University Press on behalf of the American Medical Informatics Association 2017. This work is written by US Government employees and is in the public domain in the United States.

Thinking outside the ROCs: Designing decorrelated taggers (DDT) for jet substructure

DOE PAGES

Dolen, James; Harris, Philip; Marzani, Simone; ...

2016-05-26

Here, we explore the scale-dependence and correlations of jet substructure observables to improve upon existing techniques in the identification of highly Lorentz-boosted objects. Modified observables are designed to remove correlations from existing theoretically well-understood observables, providing practical advantages for experimental measurements and searches for new phenomena. We study such observables in W jet tagging and provide recommendations for observables based on considerations beyond signal and background efficiencies.

Double Dutch: A Tool for Designing Combinatorial Libraries of Biological Systems.

PubMed

Roehner, Nicholas; Young, Eric M; Voigt, Christopher A; Gordon, D Benjamin; Densmore, Douglas

2016-06-17

Recently, semirational approaches that rely on combinatorial assembly of characterized DNA components have been used to engineer biosynthetic pathways. In practice, however, it is not practical to assemble and test millions of pathway variants in order to elucidate how different DNA components affect the behavior of a pathway. To address this challenge, we apply a rigorous mathematical approach known as design of experiments (DOE) that can be used to construct empirical models of system behavior without testing all variants. To support this approach, we have developed a tool named Double Dutch, which uses a formal grammar and heuristic algorithms to automate the process of DOE library design. Compared to designing by hand, Double Dutch enables users to more efficiently and scalably design libraries of pathway variants that can be used in a DOE framework and uniquely provides a means to flexibly balance design considerations of statistical analysis, construction cost, and risk of homologous recombination, thereby demonstrating the utility of automating decision making when faced with complex design trade-offs.

[The toxic complications of hydrogen sulfide-based balneotherapy in the spa and health resort practice].

PubMed

Khodasevich, L S

2015-01-01

The present literature review was designed to consider the toxic complications of hydrogen sulfide-based balneotherapy encountered in the spa and health resort practice that should actually be regarded as hydrogen sulfide intoxication taking into consideration that their severity depends on the route through which the toxicant enters the body, its concentration in the therapeutic bath, and the overall duration of balneotherapy. Although such complications rarely occur in everyday practice, they may constitute a threat to the patient's health which implies the necessity of adequate measures for their prevention.

From the Editor: An Introduction to the JSLHR Supplement on Implementation Science.

PubMed

Paul, Rhea

2015-12-01

The JSLHR Supplement on Implementation Science is aimed at providing discussion and examples of research in implementation science, the study of methods designed to promote the incorporation of research findings into clinical practice. Practitioners in the language science area were invited to submit articles that address their experience with various aspects of implementation science. Six articles from several research groups comprise this supplement. Implementation science is an aspect of intervention research that merits consideration by communication disorders scientists. More extensive practice of implementation science will improve uptake of evidence-based practice in the clinical community.

Using Vignettes to Tap Into Moral Reasoning in Public Health Policy: Practical Advice and Design Principles From a Study on Food Advertising to Children

PubMed Central

Taylor, Emily; Hoang, Sylvia; Cook, Brian

2014-01-01

In this article, we describe a process for designing and applying vignettes in public health policy research and practice. We developed this methodology for a study on moral reasoning underpinning policy debate on food advertising to children. Using vignettes prompted policy actors who were relatively entrenched in particular ways of speaking professionally about a controversial and ethically challenging issue to converse in a more authentic and reflective way. Vignettes hold benefits and complexities. They can focus attention on moral conflicts, draw out different types of evidence to support moral reasoning, and enable simultaneous consideration of real and ideal worlds. We suggest a process and recommendations on design features for crafting vignettes for public health policy. PMID:25121818

Using vignettes to tap into moral reasoning in public health policy: practical advice and design principles from a study on food advertising to children.

PubMed

Mah, Catherine L; Taylor, Emily; Hoang, Sylvia; Cook, Brian

2014-10-01

In this article, we describe a process for designing and applying vignettes in public health policy research and practice. We developed this methodology for a study on moral reasoning underpinning policy debate on food advertising to children. Using vignettes prompted policy actors who were relatively entrenched in particular ways of speaking professionally about a controversial and ethically challenging issue to converse in a more authentic and reflective way. Vignettes hold benefits and complexities. They can focus attention on moral conflicts, draw out different types of evidence to support moral reasoning, and enable simultaneous consideration of real and ideal worlds. We suggest a process and recommendations on design features for crafting vignettes for public health policy.

Human factors considerations in designing for infection prevention and control in neonatal care - findings from a pre-design inquiry.

PubMed

Trudel, Chantal; Cobb, Sue; Momtahan, Kathryn; Brintnell, Janet; Mitchell, Ann

2018-01-01

Qualitative data collection methods drawn from the early stages of human-centred design frameworks combined with thematic analysis were used to develop an understanding of infection prevention practice within an existing neonatal intensive care unit. Findings were used to generate a framework of understanding which in turn helped inform a baseline approach for future research and design development. The study revealed that a lack of clarity between infection transmission zones and a lack of design attributes needed to uphold infection prevention measures may be undermining healthcare workers' understanding and application of good practice. The issue may be further complicated by well-intentioned behavioural attitudes to meeting work objectives; undue influences from spatial constraints; the influence of inadvertent and excessive touch-based interactions; physical and/or cognitive exertion to maintain transmission barriers; and the impact of expanding job design and increased workload to supplement for lack of effective barriers. Practitioner Summary: Despite high hand hygiene compliance within a neonatal intensive care unit, healthcare workers expressed concerns about the unit design and infection prevention practice. Early inquiry methods from human-centred design and thematic analysis helped develop a framework to understand how design can be used to aid infection prevention.

Practical tolerancing and performance implications for XUV projection lithography reduction systems (Poster Paper)

NASA Astrophysics Data System (ADS)

Viswanathan, Vriddhachalam K.

1992-07-01

Practical considerations that will strongly affect the imaging capabilities of reflecting systems for extreme-ultraviolet (XUV) projection lithography include manufacturing tolerances and thermal distortion of the mirror surfaces due to absorption of a fraction of the incident radiation beam. We have analyzed the potential magnitudes of these effects for two types of reflective projection optical designs. We find that concentric, symmetric two-mirror systems are less sensitive to manufacturing errors and thermal distortion than off-axis, four-mirror systems.

History of diapers and diapering.

PubMed

Krafchik, Bernice

2016-07-01

For centuries, diapering has been a global practice. Most cultures around the world have historically implemented mechanisms to cover the genital area, both for privacy and to contain waste. The latest and most important innovation was the advent of the disposable diaper in the mid-twentieth century. Modern disposable diapers have considerably decreased the incidence of irritant diaper dermatitis through their design and construction. Disposable diaper use continues to grow globally. This article reviews the history of diaper practices worldwide. © 2016 The International Society of Dermatology.

Practical application of pulsed "eye-safe" microchip laser to laser rangefinders

NASA Astrophysics Data System (ADS)

Młyńczak, J.; Kopczyński, K.; Mierczyk, Z.; Zygmunt, M.; Natkański, S.; Muzal, M.; Wojtanowski, J.; Kirwil, P.; Jakubaszek, M.; Knysak, P.; Piotrowski, W.; Zarzycka, A.; Gawlikowski, A.

2013-09-01

The paper describes practical application of pulsed microchip laser generating at 1535-nm wavelength to a laser rangefinder. The complete prototype of a laser rangefinder was built and investigated in real environmental conditions. The measured performance of the device is discussed. To build the prototype of a laser rangefinder at a reasonable price and shape a number of basic considerations had to be done. These include the mechanical and optical design of a microchip laser and the opto-mechanical construction of the rangefinder.

An Interdisciplinary Design Project in Second Life: Creating a Virtual Marine Science Learning Environment

ERIC Educational Resources Information Center

Triggs, Riley; Jarmon, Leslie; Villareal, Tracy A.

2010-01-01

Virtual environments can resolve many practical and pedagogical challenges within higher education. Economic considerations, accessibility issues, and safety concerns can all be somewhat alleviated by creating learning activities in a virtual space. Because of the removal of real-world physical limitations like gravity, durability and scope,…

Alternate Methods for Disposal of Nitrocellulose Fines

DTIC Science & Technology

1985-07-22

13 Microwave ..................................... 14 Plasma ........................................ 14V Laser pyrolysis...would either be backflushed (not expected to be too successful) or replaced. Microwave Thermal Degradation The use of microwave heating has been...with microwave heating, new designs would be needed if a practical, cost effective system is to be developed. Considerable additional research would be

Taking over Someone Else's E-Learning Design: Challenges Trigger Change in E-Learning Beliefs and Practices

ERIC Educational Resources Information Center

Scott, Karen M.

2014-01-01

As universities invest in the development of e-learning resources, e-learning sustainability has come under consideration. This has largely focused on the challenges and facilitators of organisational and technological sustainability and scalability, and professional development. Little research has examined the experience of a teacher dealing…

Iron dominated magnets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fischer, G.E.

1985-07-01

These two lectures on iron dominated magnets are meant for the student of accelerator science and contain general treatments of the subjects design and construction. The material is arranged in the categories: General Concepts and Cost Considerations, Profile Configuration and Harmonics, Magnetic Measurements, a few examples of ''special magnets'' and Materials and Practices. Extensive literature is provided.

Writing at Century's End: Essays on Computer-Assisted Composition.

ERIC Educational Resources Information Center

Gerrard, Lisa, Ed.

Most of the essays in this collection originated as presentations at the University of California, Los Angeles, Conference on Computers and Writing, held in May 1985. Issues addressed in the volume range from concrete, practical considerations (such as designing classroom exercises) to political and theoretical ones (such as the instructor's…

Bibliography for aircraft parameter estimation

NASA Technical Reports Server (NTRS)

Iliff, Kenneth W.; Maine, Richard E.

1986-01-01

An extensive bibliography in the field of aircraft parameter estimation has been compiled. This list contains definitive works related to most aircraft parameter estimation approaches. Theoretical studies as well as practical applications are included. Many of these publications are pertinent to subjects peripherally related to parameter estimation, such as aircraft maneuver design or instrumentation considerations.

Recommended Practices for the Safe Design and Operation of Flywheels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bender, Donald Arthur

2015-12-01

Flywheel energy storage systems are in use globally in increasing numbers . No codes pertaining specifically to flywheel energy storage exist. A number of industrial incidents have occurred. This protocol recommends a technical basis for safe flywheel de sign and operation for consideration by flywheel developers, users of flywheel systems and standards setting organizations.

Co-Production of Knowledge in Multi-Stakeholder Processes: Analyzing Joint Experimentation as Social Learning

ERIC Educational Resources Information Center

Akpo, Essegbemon; Crane, Todd A.; Vissoh, Pierre V.; Tossou, Rigobert C.

2015-01-01

Purpose: Changing research design and methodologies regarding how researchers articulate with end-users of technology is an important consideration in developing sustainable agricultural practices. This paper analyzes a joint experiment as a multi-stakeholder process and contributes to understand how the way of organizing social learning affects…

Circulation/Reserves Area Makeover: Practical and Aesthetic Considerations in a Remodeling Project

ERIC Educational Resources Information Center

Werre, Pam

2003-01-01

The following article describes a literature review on factors that went into the planning for a new circulation/reserves desk at the Livingston Lord Library at Minnesota State University, Moorhead. Many issues have been reported in the literature and must be considered when designing a functional, convenient, and ADA-compliant…

Practical Advice for Teachers and Coaches: Handling Acute Athletic Injuries

ERIC Educational Resources Information Center

Hunt, Kevin; Ormond, Tom; Griffin, Lisa; Maina, Michael; Jones, Christopher; Goldman, Alexander Steven; McMichael, Callaway

2016-01-01

Safety concerns are among the first considerations in the design and implementation of any curriculum. However, in the dynamic worlds of physical education and coaching, athletic injuries will inevitably arise, regardless of the proactive strategies in place. These situations will vary in nature, and the student's or athlete's risk of further…

Social Learning Theories--An Important Design Consideration for Geoscience Fieldwork

ERIC Educational Resources Information Center

Streule, M. J.; Craig, L. E.

2016-01-01

The nature of field trips in geoscience lends them to the application of social learning theories for three key reasons. First, they provide opportunity for meaningful practical experience and promote effective learning afforded by no other educational vehicle in the subject. Second, they are integral for students creating a strong but changing…

The Importance of Theoretical Frameworks and Mathematical Constructs in Designing Digital Tools

ERIC Educational Resources Information Center

Trinter, Christine

2016-01-01

The increase in availability of educational technologies over the past few decades has not only led to new practice in teaching mathematics but also to new perspectives in research, methodologies, and theoretical frameworks within mathematics education. Hence, the amalgamation of theoretical and pragmatic considerations in digital tool design…

A framework for the design and development of physical employment tests and standards.

PubMed

Payne, W; Harvey, J

2010-07-01

Because operational tasks in the uniformed services (military, police, fire and emergency services) are physically demanding and incur the risk of injury, employment policy in these services is usually competency based and predicated on objective physical employment standards (PESs) based on physical employment tests (PETs). In this paper, a comprehensive framework for the design of PETs and PESs is presented. Three broad approaches to physical employment testing are described and compared: generic predictive testing; task-related predictive testing; task simulation testing. Techniques for the selection of a set of tests with good coverage of job requirements, including job task analysis, physical demands analysis and correlation analysis, are discussed. Regarding individual PETs, theoretical considerations including measurability, discriminating power, reliability and validity, and practical considerations, including development of protocols, resource requirements, administrative issues and safety, are considered. With regard to the setting of PESs, criterion referencing and norm referencing are discussed. STATEMENT OF RELEVANCE: This paper presents an integrated and coherent framework for the development of PESs and hence provides a much needed theoretically based but practically oriented guide for organisations seeking to establish valid and defensible PESs.

A linearized theory method of constrained optimization for supersonic cruise wing design

NASA Technical Reports Server (NTRS)

Miller, D. S.; Carlson, H. W.; Middleton, W. D.

1976-01-01

A linearized theory wing design and optimization procedure which allows physical realism and practical considerations to be imposed as constraints on the optimum (least drag due to lift) solution is discussed and examples of application are presented. In addition to the usual constraints on lift and pitching moment, constraints are imposed on wing surface ordinates and wing upper surface pressure levels and gradients. The design procedure also provides the capability of including directly in the optimization process the effects of other aircraft components such as a fuselage, canards, and nacelles.

The prevention of electronical breakdown and electrostatic voltage problems in the space shuttle and its payloads. Part 2: Design guides and operations considerations

NASA Technical Reports Server (NTRS)

Whitson, D. W.

1975-01-01

The specific electrical discharge problems that can directly affect the shuttle vehicle and its payloads are addressed. General design guidelines are provided to assist flight hardware managers in minimizing these kinds of problems. Specific data are included on workmanship practices and system testing while in low pressure environments. Certain electrical discharge problems that may be unique to the design of the shuttle vehicle itself and to its various mission operational models are discussed.

Adaptation of Combustion Principles to Aircraft Propulsion. Volume I; Basic Considerations in the Combustion of Hydrocarbon Fuels with Air

NASA Technical Reports Server (NTRS)

Barnett, Henry C (Editor); Hibbard, Robert R (Editor)

1955-01-01

The report summarizes source material on combustion for flight-propulsion engineers. First, several chapters review fundamental processes such as fuel-air mixture preparation, gas flow and mixing, flammability and ignition, flame propagation in both homogenous and heterogenous media, flame stabilization, combustion oscillations, and smoke and carbon formation. The practical significance and the relation of these processes to theory are presented. A second series of chapters describes the observed performance and design problems of engine combustors of the principal types. An attempt is made to interpret performance in terms of the fundamental processes and theories previously reviewed. Third, the design of high-speed combustion systems is discussed. Combustor design principles that can be established from basic considerations and from experience with actual combustors are described. Finally, future requirements for aircraft engine combustion systems are examined.

Practical design considerations for photovoltaic power station

NASA Astrophysics Data System (ADS)

Swanson, T. D.

Aspects of photovoltaic (PV) technology are discussed along with generic PV design considerations, taking into account the resource sunlight, PV modules and their reliability, questions of PV system design, the support structure subsystem, and a power conditioning unit subsystem. A description is presented of two recent projects which demonstrate the translation of an idea into actual working PV systems. A privately financed project in Denton, Maryland, went on line in early December, 1982, and began providing power to the local utility grid. It represents the first intermediate size, grid-connected, privately financed power station in the U.S. Based on firm quotes, the actual cost of this system is about $13/W peak. The other project, called the PV Breeder, is an energy independent facility which utilizes solar power to make new solar cells. It is also the first large industrial structure completely powered by the sun.

Using Smartphones to Collect Behavioral Data in Psychological Science: Opportunities, Practical Considerations, and Challenges

PubMed Central

Harari, Gabriella M.; Lane, Nicholas D.; Wang, Rui; Crosier, Benjamin S.; Campbell, Andrew T.; Gosling, Samuel D.

2017-01-01

Smartphones now offer the promise of collecting behavioral data unobtrusively, in situ, as it unfolds in the course of daily life. Data can be collected from the onboard sensors and other phone logs embedded in today’s off-the-shelf smartphone devices. These data permit fine-grained, continuous collection of people’s social interactions (e.g., speaking rates in conversation, size of social groups, calls, and text messages), daily activities (e.g., physical activity and sleep), and mobility patterns (e.g., frequency and duration of time spent at various locations). In this article, we have drawn on the lessons from the first wave of smartphone-sensing research to highlight areas of opportunity for psychological research, present practical considerations for designing smartphone studies, and discuss the ongoing methodological and ethical challenges associated with research in this domain. It is our hope that these practical guidelines will facilitate the use of smartphones as a behavioral observation tool in psychological science. PMID:27899727

Using Smartphones to Collect Behavioral Data in Psychological Science: Opportunities, Practical Considerations, and Challenges.

PubMed

Harari, Gabriella M; Lane, Nicholas D; Wang, Rui; Crosier, Benjamin S; Campbell, Andrew T; Gosling, Samuel D

2016-11-01

Smartphones now offer the promise of collecting behavioral data unobtrusively, in situ, as it unfolds in the course of daily life. Data can be collected from the onboard sensors and other phone logs embedded in today's off-the-shelf smartphone devices. These data permit fine-grained, continuous collection of people's social interactions (e.g., speaking rates in conversation, size of social groups, calls, and text messages), daily activities (e.g., physical activity and sleep), and mobility patterns (e.g., frequency and duration of time spent at various locations). In this article, we have drawn on the lessons from the first wave of smartphone-sensing research to highlight areas of opportunity for psychological research, present practical considerations for designing smartphone studies, and discuss the ongoing methodological and ethical challenges associated with research in this domain. It is our hope that these practical guidelines will facilitate the use of smartphones as a behavioral observation tool in psychological science. © The Author(s) 2016.

Design of energy harvesting systems for harnessing vibrational motion from human and vehicular motion

NASA Astrophysics Data System (ADS)

Wickenheiser, Adam; Garcia, Ephrahim

2010-04-01

In much of the vibration-based energy harvesting literature, devices are modeled, designed, and tested for dissipating energy across a resistive load at a single base excitation frequency. This paper presents several practical scenarios germane to tracking, sensing, and wireless communication on humans and land vehicles. Measured vibrational data from these platforms are used to provide a time-varying, broadband input to the energy harvesting system. Optimal power considerations are given for several circuit topologies, including a passive rectifier circuit and active, switching methods. Under various size and mass constraints, the optimal design is presented for two scenarios: walking and idling a car. The frequency response functions are given alongside time histories of the power harvested using the experimental base accelerations recorded. The issues involved in designing an energy harvester for practical (i.e. timevarying, non-sinusoidal) applications are discussed.

Studies of a Latent Class Signal Detection Model for Constructed Response Scoring II: Incomplete and Hierarchical Designs. Research Report. ETS RR-10-08

ERIC Educational Resources Information Center

DeCarlo, Lawrence T.

2010-01-01

A basic consideration in large-scale assessments that use constructed response (CR) items, such as essays, is how to allocate the essays to the raters that score them. Designs that are used in practice are incomplete, in that each essay is scored by only a subset of the raters, and also unbalanced, in that the number of essays scored by each rater…

The Practical Impact of Recent Computer Advances on the Analysis and Design of Large Scale Networks

DTIC Science & Technology

1974-06-01

Capacity Considerations," ARPA Network Information Center, Stanford Research Institute. 10. Gitman , I., R. M. VanSlyke, H. Frank: "On Splitting...281-285. 12. Gitman , I., "On : ^e Capacity of Slotted ALOHA Networks and Some Design Problems", ARPANET Network Information Center, Stanford...sum of the average demands of that population." Gitman , Van Slyke, and Frank [3], have addressed the problem of splitting a channel between two

Summary Article: IEA HPP Annex 36: Quality Installation / Quality Maintenance Sensitivity Studies

DOE PAGES

Hourahan, Glenn; Domanski, Piotr; Baxter, Van D.

2015-01-30

The outcome from this Annex activity clearly identifies that poorly designed, installed, and/or maintained heat pumps operate inefficiently and waste considerable energy compared to their as-designed potential. Additionally, it is clear that small faults for a given field-observed practice are significant, that some attribute deviations (in various equipment applications and geographical locations) have a larger impact than others, and that multiple faults or deviations have a cumulative impact on heat pump performance.

Evidence-Based Design of Fixed-Dose Combinations: Principles and Application to Pediatric Anti-Tuberculosis Therapy.

PubMed

Svensson, Elin M; Yngman, Gunnar; Denti, Paolo; McIlleron, Helen; Kjellsson, Maria C; Karlsson, Mats O

2018-05-01

Fixed-dose combination formulations where several drugs are included in one tablet are important for the implementation of many long-term multidrug therapies. The selection of optimal dose ratios and tablet content of a fixed-dose combination and the design of individualized dosing regimens is a complex task, requiring multiple simultaneous considerations. In this work, a methodology for the rational design of a fixed-dose combination was developed and applied to the case of a three-drug pediatric anti-tuberculosis formulation individualized on body weight. The optimization methodology synthesizes information about the intended use population, the pharmacokinetic properties of the drugs, therapeutic targets, and practical constraints. A utility function is included to penalize deviations from the targets; a sequential estimation procedure was developed for stable estimation of break-points for individualized dosing. The suggested optimized pediatric anti-tuberculosis fixed-dose combination was compared with the recently launched World Health Organization-endorsed formulation. The optimized fixed-dose combination included 15, 36, and 16% higher amounts of rifampicin, isoniazid, and pyrazinamide, respectively. The optimized fixed-dose combination is expected to result in overall less deviation from the therapeutic targets based on adult exposure and substantially fewer children with underexposure (below half the target). The development of this design tool can aid the implementation of evidence-based formulations, integrating available knowledge and practical considerations, to optimize drug exposures and thereby treatment outcomes.

Grid sensitivity capability for large scale structures

NASA Technical Reports Server (NTRS)

Nagendra, Gopal K.; Wallerstein, David V.

1989-01-01

The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

The research-design interaction: lessons learned from an evidence-based design studio.

PubMed

Haq, Saif; Pati, Debajyoti

2010-01-01

As evidence-based design (EBD) emerges as a model of design practice, considerable attention has been given to its research component. However, this overshadows another essential component of EBD-the change agent, namely the designer. EBD introduced a new skill set to the practitioner: the ability to interact with scientific evidence. Industry sources suggest adoption of the EBD approach across a large number of design firms. How comfortable are these designers in integrating research with design decision making? Optimizing the interaction between the primary change agent (the designer) and the evidence is crucial to producing the desired outcomes. Preliminary to examining this question, an architectural design studio was used as a surrogate environment to examine how designers interact with evidence. Twelve students enrolled in a healthcare EBD studio during the spring of 2009. A three-phase didactic structure was adopted: knowing a hospital, knowing the evidence, and designing with knowledge and evidence. Products of the studio and questionnaire responses from the students were used as the data for analysis. The data suggest that optimization of the research-design relationship warrants consideration in four domains: (1) a knowledge structure that is easy to comprehend; (2) phase-complemented representation of evidence; (3) access to context and precedence information; and (4) a designer-friendly vocabulary.

A flexible tool for hydraulic and water quality performance analysis of green infrastructure

NASA Astrophysics Data System (ADS)

Massoudieh, A.; Alikhani, J.

2017-12-01

Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. To be used to evaluate the effect design configurations on the long-term performance of GIs, models should be able to consider processes within GIs with good fidelity. In this presentation, a sophisticated, yet flexible tool for hydraulic and water quality assessment of GIs will be introduced. The tool can be used by design engineers and researchers to capture and explore the effect of design factors and properties of the media employed in the performance of GI systems at a relatively small scale. We deemed it essential to have a flexible GI modeling tool that is capable of simulating GI system components and specific biogeochemical processes affecting contaminants such as evapotranspiration, plant uptake, reactions, and particle-associated transport accurately while maintaining a high degree of flexibility to account for the myriad of GI alternatives. The mathematical framework for a stand-alone GI performance assessment tool has been developed and will be demonstrated. The process-based model framework developed here can be used to model a diverse range of GI practices such as stormwater ponds, green roofs, retention ponds, bioretention systems, infiltration trench, permeable pavement and other custom-designed combinatory systems. An example of the application of the system to evaluate the performance of a rain-garden system will be demonstrated.

Practical Considerations for Using Constant Force Springs in Space-Based Mechanisms

NASA Technical Reports Server (NTRS)

Williams, R. Brett; Fisher, Charles D.; Gallon, John C.

2013-01-01

Mechanical springs are a common element in mechanism from all walks of life; cars, watches, appliances, and many others. These springs generally exhibit a linear relationship between force and deflection. In small mechanisms, deflections are small so the variation in spring force between one position and another are generally small and do not influence the design or functionality of the device. However, as the spacecraft industry drives towards larger, deployable satellites, the distances a spring or springs must function over can become considerable so much so that the structural integrity of the device may be impacted. As such, an increasingly common mechanism element is the constant force spring- one that provides a constant force regardless of deflection. These elements are commonly in the conceptual design phase to deal with system-level large deflections, but in the detailed design or integration test phase they can pose significant implementation issues. This article addresses some of the detailed issues in order for these constant force springs to be properly designed into space systems.

Regulatory considerations in the design of comparative observational studies using propensity scores.

PubMed

Yue, Lilly Q

2012-01-01

In the evaluation of medical products, including drugs, biological products, and medical devices, comparative observational studies could play an important role when properly conducted randomized, well-controlled clinical trials are infeasible due to ethical or practical reasons. However, various biases could be introduced at every stage and into every aspect of the observational study, and consequently the interpretation of the resulting statistical inference would be of concern. While there do exist statistical techniques for addressing some of the challenging issues, often based on propensity score methodology, these statistical tools probably have not been as widely employed in prospectively designing observational studies as they should be. There are also times when they are implemented in an unscientific manner, such as performing propensity score model selection for a dataset involving outcome data in the same dataset, so that the integrity of observational study design and the interpretability of outcome analysis results could be compromised. In this paper, regulatory considerations on prospective study design using propensity scores are shared and illustrated with hypothetical examples.

Methodological standards in single-case experimental design: Raising the bar.

PubMed

Ganz, Jennifer B; Ayres, Kevin M

2018-04-12

Single-case experimental designs (SCEDs), or small-n experimental research, are frequently implemented to assess approaches to improving outcomes for people with disabilities, particularly those with low-incidence disabilities, such as some developmental disabilities. SCED has become increasingly accepted as a research design. As this literature base is needed to determine what interventions are evidence-based practices, the acceptance of SCED has resulted in increased critiques with regard to methodological quality. Recent trends include recommendations from a number of expert scholars and institutions. The purpose of this article is to summarize the recent history of methodological quality considerations, synthesize the recommendations found in the SCED literature, and provide recommendations to researchers designing SCEDs with regard to essential and aspirational standards for methodological quality. Conclusions include imploring SCED to increase the quality of their experiments, with particular consideration regarding the applied nature of SCED research to be published in Research in Developmental Disabilities and beyond. Copyright © 2018 Elsevier Ltd. All rights reserved.

A flexible framework for process-based hydraulic and water ...

EPA Pesticide Factsheets

Background Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. While popular, generally, the GI models are relatively simplistic. However, GI model predictions are being relied upon by many municipalities and State/Local agencies to make decisions about grey vs. green infrastructure improvement planning. Adding complexity to GI modeling frameworks may preclude their use in simpler urban planning situations. Therefore, the goal here was to develop a sophisticated, yet flexible tool that could be used by design engineers and researchers to capture and explore the effect of design factors and properties of the media used in the performance of GI systems at a relatively small scale. We deemed it essential to have a flexible GI modeling tool that is capable of simulating GI system components and specific biophysical processes affecting contaminants such as reactions, and particle-associated transport accurately while maintaining a high degree of flexibly to account for the myriad of GI alternatives. The mathematical framework for a stand-alone GI performance assessment tool has been developed and will be demonstrated.Framework Features The process-based model framework developed here can be used to model a diverse range of GI practices such as green roof, retention pond, bioretention, infiltration trench, permeable pavement and

MIUS community conceptual design study

NASA Technical Reports Server (NTRS)

Fulbright, B. E.

1976-01-01

The feasibility, practicality, and applicability of the modular integrated utility systems (MIUS) concept to a satellite new-community development with a population of approximately 100,000 were analyzed. Two MIUS design options, the 29-MIUS-unit (option 1) and the 8-MIUS-unit (option 2) facilities were considered. Each resulted in considerable resource savings when compared to a conventional utility system. Economic analyses indicated that the total cash outlay and operations and maintenance costs for these two options were considerably less than for a conventional system. Computer analyses performed in support of this study provided corroborative data for the study group. An environmental impact assessment was performed to determine whether the MIUS meets or will meet necessary environmental standards. The MIUS can provide improved efficiency in the conservation of natural resources while not adversely affecting the physical environment.

Designing the user interface: strategies for effective human-computer interaction

NASA Astrophysics Data System (ADS)

Shneiderman, B.

1998-03-01

In revising this popular book, Ben Shneiderman again provides a complete, current and authoritative introduction to user-interface design. The user interface is the part of every computer system that determines how people control and operate that system. When the interface is well designed, it is comprehensible, predictable, and controllable; users feel competent, satisfied, and responsible for their actions. Shneiderman discusses the principles and practices needed to design such effective interaction. Based on 20 years experience, Shneiderman offers readers practical techniques and guidelines for interface design. He also takes great care to discuss underlying issues and to support conclusions with empirical results. Interface designers, software engineers, and product managers will all find this book an invaluable resource for creating systems that facilitate rapid learning and performance, yield low error rates, and generate high user satisfaction. Coverage includes the human factors of interactive software (with a new discussion of diverse user communities), tested methods to develop and assess interfaces, interaction styles such as direct manipulation for graphical user interfaces, and design considerations such as effective messages, consistent screen design, and appropriate color.

Practical experience with graphical user interfaces and object-oriented design in the clinical laboratory.

PubMed

Wells, I G; Cartwright, R Y; Farnan, L P

1993-12-15

The computing strategy in our laboratories evolved from research in Artificial Intelligence, and is based on powerful software tools running on high performance desktop computers with a graphical user interface. This allows most tasks to be regarded as design problems rather than implementation projects, and both rapid prototyping and an object-oriented approach to be employed during the in-house development and enhancement of the laboratory information systems. The practical application of this strategy is discussed, with particular reference to the system designer, the laboratory user and the laboratory customer. Routine operation covers five departments, and the systems are stable, flexible and well accepted by the users. Client-server computing, currently undergoing final trials, is seen as the key to further development, and this approach to Pathology computing has considerable potential for the future.

GPs' considerations in multimorbidity management: a qualitative study.

PubMed

Luijks, Hilde D; Loeffen, Maartje J W; Lagro-Janssen, Antoine L; van Weel, Chris; Lucassen, Peter L; Schermer, Tjard R

2012-07-01

Scientific evidence on how to manage multimorbidity is limited, but GPs have extensive practical experience with multimorbidity management. To explore GPs' considerations and main objectives in the management of multimorbidity and to explore factors influencing their management of multimorbidity. Focus group study of Dutch GPs; with heterogeneity in characteristics such as sex, age and urbanisation. The moderator used an interview guide in conducting the interviews. Two researchers performed the analysis as an iterative process, based on verbatim transcripts and by applying the technique of constant comparative analysis. Data collection proceeded until saturation was reached. Five focus groups were conducted with 25 participating GPs. The main themes concerning multimorbidity management were individualisation, applying an integrated approach, medical considerations placed in perspective, and sharing decision making and responsibility. A personal patient-doctor relationship was considered a major factor positively influencing the management of multimorbidity. Mental-health problems and interacting conditions were regarded as major barriers in this respect and participants experienced several practical problems. The concept of patient-centredness overarches the participants' main objectives. GPs' main objective in multimorbidity management is applying a patient-centred approach. This approach is welcomed since it counteracts some potential pitfalls of multimorbidity. Further research should include a similar design in a different setting and should aim at developing best practice in multimorbidity management.

Some practical universal noiseless coding techniques

NASA Technical Reports Server (NTRS)

Rice, R. F.

1979-01-01

Some practical adaptive techniques for the efficient noiseless coding of a broad class of such data sources are developed and analyzed. Algorithms are designed for coding discrete memoryless sources which have a known symbol probability ordering but unknown probability values. A general applicability of these algorithms to solving practical problems is obtained because most real data sources can be simply transformed into this form by appropriate preprocessing. These algorithms have exhibited performance only slightly above all entropy values when applied to real data with stationary characteristics over the measurement span. Performance considerably under a measured average data entropy may be observed when data characteristics are changing over the measurement span.

Predicting Academics' Willingness to Participate in Peer Review of Teaching: A Quantitative Investigation

ERIC Educational Resources Information Center

White, Kiri; Boehm, Emilia; Chester, Andrea

2014-01-01

Peer review of teaching is a collegial process designed to help academics reflect on and improve their teaching practice. Considerable research supports the value of peer review of teaching. However, uptake of voluntary programs is typically low. Few studies have examined the predictors of engagement in voluntary peer review. This study surveyed…

Beyond the Paycheck: A Human Resources Management Guide for Leaders of Small Youth-Serving Organizations

ERIC Educational Resources Information Center

Casey, Thomas P.

2009-01-01

This guide aims to help organization leaders develop the tools and knowledge they need to create and use sound human resources management (HRM) systems and practices that support program success and sustainability. It identifies key components of HRM systems and discusses important considerations in designing HRM policies, procedures, and…

High School Weight-Training Curriculum: Course Development Considerations

ERIC Educational Resources Information Center

Bertelsen, Susan L.; Thompson, Ben

2017-01-01

As weight training gain's popularity as a high school course offering, it is imperative to examine not only the way it is being presented but also the content. There is an appropriate scope and sequence that allows students to grasp basic knowledge and practical experiences to design and perform a weight-training program according to their…

Didactic and Technical Considerations When Developing e-Learning and CME

ERIC Educational Resources Information Center

te Pas, Ellen; Wieringa-de Waard, Margreet; Blok, Bernadette Snijders; Pouw, Henny; van Dijk, Nynke

2016-01-01

Several usability issues were encountered during the design of a blended e-learning program for a course in evidence-based medicine for general practice trainers. The program was developed in four steps. We focused in this article on step 2 and 3. Step 2 focused on which educational principles to apply, that is, which learning theories,…

Extending the Capabilities of Internet-Based Research: Lessons from the Field.

ERIC Educational Resources Information Center

Tingling, Peter; Parent, Michael; Wade, Michael

2003-01-01

Summarizes the existing practices of Internet research and suggests extensions to them (e.g., consideration of new capabilities, such as adaptive questions and higher levels of flexibility and control) based on a large-scale, national Web survey. Lessons learned include the use of a modular design, management of Web traffic, and the higher level…

Design-Based Research and Educational Technology: Rethinking Technology and the Research Agenda

ERIC Educational Resources Information Center

Amiel, Tel; Reeves, Thomas C.

2008-01-01

The role of educational technologies in improving educational practices and outcomes has been criticized as over-hyped and insignificant. With few exceptions, the state of education has changed less than expected as a result of tools such as computers and the Internet. To a considerable degree, this is due to the minor role educational technology…

Item Pool Design for an Operational Variable-Length Computerized Adaptive Test

ERIC Educational Resources Information Center

He, Wei; Reckase, Mark D.

2014-01-01

For computerized adaptive tests (CATs) to work well, they must have an item pool with sufficient numbers of good quality items. Many researchers have pointed out that, in developing item pools for CATs, not only is the item pool size important but also the distribution of item parameters and practical considerations such as content distribution…

Cultural Issues in Adventure Programming: Applying Hofstede's Five Dimensions to Assessment and Practice

ERIC Educational Resources Information Center

Chang, Te-Hsin; Tucker, Anita R.; Norton, Christine Lynn; Gass, Michael A.; Javorski, Stephen E.

2017-01-01

Adventure programming has seen considerable growth throughout the world. While newly established programs aim to meet the needs of their prospective clients, failing to account for cultural differences when conducting or designing programs may impede this goal. Non-western approaches to implementing adventure programs have rarely been discussed,…

Building a global business continuity programme.

PubMed

Lazcano, Michael

2014-01-01

Business continuity programmes provide an important function within organisations, especially when aligned with and supportive of the organisation's goals, objectives and organisational culture. Continuity programmes for large, complex international organisations, unlike those for compact national companies, are more difficult to design, build, implement and maintain. Programmes for international organisations require attention to structural design, support across organisational leadership and hierarchy, seamless integration with the organisation's culture, measured success and demonstrated value. This paper details practical, but sometimes overlooked considerations for building successful global business continuity programmes.

Does the time frame between exercise influence the effectiveness of hydrotherapy for recovery?

PubMed

Halson, Shona L

2011-06-01

An increase in research investigating recovery strategies has occurred alongside the increase in usage of recovery by elite athletes. Because there is inconsistent evidence regarding the benefits of recovery on performance, it is necessary to examine research design to identify possible strategies that enhance performance in different athlete settings. The purpose of this review is to examine available recovery literature specifically related to the time frame between performance assessments to identify considerations for both research design and practical use of recovery techniques.

Issues and Challenges Facing Flexible Lithium-Ion Batteries for Practical Application.

PubMed

Cha, Hyungyeon; Kim, Junhyeok; Lee, Yoonji; Cho, Jaephil; Park, Minjoon

2017-12-27

With the advent of flexible electronics, lithium-ion batteries have become a key component of high performance energy storage systems. Thus, considerable effort is made to keep up with the development of flexible lithium-ion batteries. To date, many researchers have studied newly designed batteries with flexibility, however, there are several significant challenges that need to be overcome, such as degradation of electrodes under external load, poor battery performance, and complicated cell preparation procedures. In addition, an in-depth understanding of the current challenges for flexible batteries is rarely addressed in a systematical and practical way. Herein, recent progress and current issues of flexible lithium-ion batteries in terms of battery materials and cell designs are reviewed. A critical overview of important issues and challenges for the practical application of flexible lithium-ion batteries is also provided. Finally, the strategies are discussed to overcome current limitations of the practical use of flexible lithium-based batteries, providing a direction for future research. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Recommended Practice for Use of Emissive Probes in Electric Propulsion Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah

Here, this article provides recommended methods for building, operating, and taking plasma potential measurements from electron-emitting probes in electric propulsion devices, including Hall thrusters, gridded ion engines, and others. The two major techniques, the floating point technique and the inflection point technique, are described in detail as well as calibration and error-reduction methods. The major heating methods are described as well as the various considerations for emissive probe construction. Lastly, special considerations for electric propulsion plasmas are addressed, including high-energy densities, ion flows, magnetic fields, and potential fluctuations. Recommendations for probe design and operation are provided.

Recommended Practice for Use of Emissive Probes in Electric Propulsion Testing

DOE PAGES

Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah; ...

2016-11-03

Here, this article provides recommended methods for building, operating, and taking plasma potential measurements from electron-emitting probes in electric propulsion devices, including Hall thrusters, gridded ion engines, and others. The two major techniques, the floating point technique and the inflection point technique, are described in detail as well as calibration and error-reduction methods. The major heating methods are described as well as the various considerations for emissive probe construction. Lastly, special considerations for electric propulsion plasmas are addressed, including high-energy densities, ion flows, magnetic fields, and potential fluctuations. Recommendations for probe design and operation are provided.

Automatic Layout Design for Power Module

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ning, Puqi; Wang, Fei; Ngo, Khai

The layout of power modules is one of the most important elements in power module design, especially for high power densities, where couplings are increased. In this paper, an automatic design process using a genetic algorithm is presented. Some practical considerations are introduced in the optimization of the layout design of the module. This paper presents a process for automatic layout design for high power density modules. Detailed GA implementations are introduced both for outer loop and inner loop. As verified by a design example, the results of the automatic design process presented here are better than those from manualmore » design and also better than the results from a popular design software. This automatic design procedure could be a major step toward improving the overall performance of future layout design.« less

Optical design and performance of F-Theta lenses for high-power and high-precision applications

NASA Astrophysics Data System (ADS)

Yurevich, V. I.; Grimm, V. A.; Afonyushkin, A. A.; Yudin, K. V.; Gorny, S. G.

2015-09-01

F-Theta lenses are widely used in remote laser processing. Nowadays, a large variety of scanning systems utilizing these devices are commercially available. In this paper, we demonstrate that all practical issues lose their triviality in designing high-performance F-Theta scanning systems. Laser power scaling requires attention to thermally-induced phenomena and ghost reflections. This requirement considerably complicates optimization of the optical configuration of the system and primary aberration correction, even during preliminary design. Obtaining high positioning accuracy requires taking into consideration all probable reasons for processing field distortion. We briefly describe the key engineering relationships and invariants as well as the typical design of a scanner lens and the main field-flattening techniques. Specific emphasis is directed to consideration of the fundamental nonlinearity of two-mirror scanners. To the best of our knowledge, this issue has not been yet studied. We also demonstrate the benefits of our F-Theta lens optimization technique, which uses a plurality of entrance pupils. The problems of eliminating focused ghost reflections and the effects of thermally-induced processes in high-power F-Theta lenses are considered. A set of multi-path 3D processing and laser cutting experiments were conducted and are presented herein to demonstrate the impact of laser beam degradation on the process performance. A selection of our non-standard optical designs is presented.

Investigation of Kevlar fabric-based materials for use with inflatable structures

NASA Technical Reports Server (NTRS)

Niccum, R. J.; Munson, J. B.; Rueter, L. L.

1977-01-01

Design, manufacture and testing of laminated and coated composite materials incorporating a structural matrix of Kevlar are reported. The practicality of using Kevlar in aerostat materials is demonstrated, and data are provided on practical weaves, lamination and coating particulars, rigidity, strength, weight, elastic coefficients, abrasion resistance, crease effects, peel strength, blocking tendencies, helium permeability, and fabrication techniques. Properties of the Kevlar-based materials are compared with conventional Dacron-reinforced counterparts. A comprehensive test and qualification program is discussed, and considerable quantitative biaxial tensile and shear test data are provided.

Consumer preferences and values as an integral key to evidence-based practice.

PubMed

Melnyk, Bernadette Mazurek; Fineout-Overholt, Ellen

2006-01-01

Although evidence-based practice (EBP) integrates the best evidence from well-designed studies with a clinician's expertise and patient preferences and values, most of what is emphasized in books and reports on EBP is the 5-step EBP process. However, the consideration of patient values and preferences in making clinical decisions is essential to deliver the highest quality of care. This article briefly reviews the status of EBP in the United States, described the ARCC mentorship model, and highlights how to engage consumers in the EBP process.

Statistical lessons learned for designing cluster randomized pragmatic clinical trials from the NIH Health Care Systems Collaboratory Biostatistics and Design Core.

PubMed

Cook, Andrea J; Delong, Elizabeth; Murray, David M; Vollmer, William M; Heagerty, Patrick J

2016-10-01

Pragmatic clinical trials embedded within health care systems provide an important opportunity to evaluate new interventions and treatments. Networks have recently been developed to support practical and efficient studies. Pragmatic trials will lead to improvements in how we deliver health care and promise to more rapidly translate research findings into practice. The National Institutes of Health (NIH) Health Care Systems Collaboratory was formed to conduct pragmatic clinical trials and to cultivate collaboration across research areas and disciplines to develop best practices for future studies. Through a two-stage grant process including a pilot phase (UH2) and a main trial phase (UH3), investigators across the Collaboratory had the opportunity to work together to improve all aspects of these trials before they were launched and to address new issues that arose during implementation. Seven Cores were created to address the various considerations, including Electronic Health Records; Phenotypes, Data Standards, and Data Quality; Biostatistics and Design Core; Patient-Reported Outcomes; Health Care Systems Interactions; Regulatory/Ethics; and Stakeholder Engagement. The goal of this article is to summarize the Biostatistics and Design Core's lessons learned during the initial pilot phase with seven pragmatic clinical trials conducted between 2012 and 2014. Methodological issues arose from the five cluster-randomized trials, also called group-randomized trials, including consideration of crossover and stepped wedge designs. We outlined general themes and challenges and proposed solutions from the pilot phase including topics such as study design, unit of randomization, sample size, and statistical analysis. Our findings are applicable to other pragmatic clinical trials conducted within health care systems. Pragmatic clinical trials using the UH2/UH3 funding mechanism provide an opportunity to ensure that all relevant design issues have been fully considered in order to reliably and efficiently evaluate new interventions and treatments. The integrity and generalizability of trial results can only be ensured if rigorous designs and appropriate analysis choices are an essential part of their research protocols. © The Author(s) 2016.

Enhanced avatar design using cognitive map-based simulation.

PubMed

Lee, Kun Chang; Moon, Byung Suk

2007-12-01

With the advent of the Internet era and the maturation of electronic commerce, strategic avatar design has become an important way of keeping up with market changes and customer tastes. In this study, we propose a new approach to an adaptive avatar design that uses cognitive map (CM) as a what-if simulation vehicle. The main virtue of the new design is its ability to change specific avatar design features with objective consideration of the subsequent effects upon other design features, thereby enhancing user satisfaction. Statistical analyses of focus group interview results with a group of experts majoring in avatars and CM showed that our proposed approach could be used to effectively analyze avatar design in an adaptive and practical manner when the market situation is changing.

Designing for health in school buildings: between research and practice.

PubMed

Kirkeby, Inge Mette; Jensen, Bjarne Bruun; Larsen, Kristian; Kural, René

2015-05-01

To investigate the kinds of knowledge practitioners use when planning and designing for health in school buildings. Twelve semi-structured qualitative interviews were conducted with architects, teachers and officials to investigate use of knowledge in the making of school buildings. Practitioners drew on many kinds and sources of knowledge, but in particular they made use of concepts, examples or pictures or thought-provoking knowledge. However, the interviews indicate a number of hurdles for efficient knowledge sharing between research and practice: (1) a considerable discrepancy between kinds of knowledge used by practice and knowledge traditionally produced by research; (2) research-knowledge and practice-knowledge form two circuits and the flow from one circuit to the other is weak; (3) practitioners' knowledge was often based on experience and therefore person-dependent. It makes the knowledge vulnerable. Special attention has to be paid by research to concepts and principles to guide the decision-making in practice. Further is recommended to consider new kinds of collaboration between researchers and practitioners. © 2015 the Nordic Societies of Public Health.

Parametric design of tri-axial nested Helmholtz coils

NASA Astrophysics Data System (ADS)

Abbott, Jake J.

2015-05-01

This paper provides an optimal parametric design for tri-axial nested Helmholtz coils, which are used to generate a uniform magnetic field with controllable magnitude and direction. Circular and square coils, both with square cross section, are considered. Practical considerations such as wire selection, wire-wrapping efficiency, wire bending radius, choice of power supply, and inductance and time response are included. Using the equations provided, a designer can quickly create an optimal set of custom coils to generate a specified field magnitude in the uniform-field region while maintaining specified accessibility to the central workspace. An example case study is included.

Parametric design of tri-axial nested Helmholtz coils.

PubMed

Abbott, Jake J

2015-05-01

This paper provides an optimal parametric design for tri-axial nested Helmholtz coils, which are used to generate a uniform magnetic field with controllable magnitude and direction. Circular and square coils, both with square cross section, are considered. Practical considerations such as wire selection, wire-wrapping efficiency, wire bending radius, choice of power supply, and inductance and time response are included. Using the equations provided, a designer can quickly create an optimal set of custom coils to generate a specified field magnitude in the uniform-field region while maintaining specified accessibility to the central workspace. An example case study is included.

Parametric design of tri-axial nested Helmholtz coils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbott, Jake J., E-mail: jake.abbott@utah.edu

This paper provides an optimal parametric design for tri-axial nested Helmholtz coils, which are used to generate a uniform magnetic field with controllable magnitude and direction. Circular and square coils, both with square cross section, are considered. Practical considerations such as wire selection, wire-wrapping efficiency, wire bending radius, choice of power supply, and inductance and time response are included. Using the equations provided, a designer can quickly create an optimal set of custom coils to generate a specified field magnitude in the uniform-field region while maintaining specified accessibility to the central workspace. An example case study is included.

MDO and Cross-Disciplinary Practice in R&D: A Portrait of Principles and Current Practice

NASA Technical Reports Server (NTRS)

Rivas McGowan, Anna-Maria; Papalambros, Panos Y.; Baker, Wayne E.

2014-01-01

For several decades, Multidisciplinary Design Optimization (MDO) has served an important role in aerospace engineering by incorporating physics based disciplinary models into integrated system or sub-system models for use in research, development, (R&D) and design. This paper examines MDO's role in facilitating the integration of the researchers from different single disciplines during R&D and early design of large-scale complex engineered systems (LaCES) such as aerospace systems. The findings in this paper are summarized from a larger study on interdisciplinary practices and perspectives that included considerable empirical data from surveys, interviews, and ethnography. The synthesized findings were derived by integrating the data with theories from organization science and engineering. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. Correspondingly, the data showed that MDO is not the primary integrator of researchers working across disciplines during R&D and early design of LaCES. Cognitive focus such as analysis versus design, organizational challenges such as incentives, and social opportunities such as personal networks often drove the human interactive practices among researchers from different disciplines. Facilitation of the inherent confusion, argument, and learning in crossdisciplinary research was identified as one of several needed elements of enabling successful research across disciplines.

Key elements of high-quality practice organisation in primary health care: a systematic review.

PubMed

Crossland, Lisa; Janamian, Tina; Jackson, Claire L

2014-08-04

To identify elements that are integral to high-quality practice and determine considerations relating to high-quality practice organisation in primary care. A narrative systematic review of published and grey literature. Electronic databases (PubMed, CINAHL, the Cochrane Library, Embase, Emerald Insight, PsycInfo, the Primary Health Care Research and Information Service website, Google Scholar) were searched in November 2013 and used to identify articles published in English from 2002 to 2013. Reference lists of included articles were searched for relevant unpublished articles and reports. Data were configured at the study level to allow for the inclusion of findings from a broad range of study types. Ten elements were most often included in the existing organisational assessment tools. A further three elements were identified from an inductive thematic analysis of descriptive articles, and were noted as important considerations in effective quality improvement in primary care settings. Although there are some validated tools available to primary care that identify and build quality, most are single-strategy approaches developed outside health care settings. There are currently no validated organisational improvement tools, designed specifically for primary health care, which combine all elements of practice improvement and whose use does not require extensive external facilitation.

Facebook as a research tool for the social sciences: Opportunities, challenges, ethical considerations, and practical guidelines.

PubMed

Kosinski, Michal; Matz, Sandra C; Gosling, Samuel D; Popov, Vesselin; Stillwell, David

2015-09-01

Facebook is rapidly gaining recognition as a powerful research tool for the social sciences. It constitutes a large and diverse pool of participants, who can be selectively recruited for both online and offline studies. Additionally, it facilitates data collection by storing detailed records of its users' demographic profiles, social interactions, and behaviors. With participants' consent, these data can be recorded retrospectively in a convenient, accurate, and inexpensive way. Based on our experience in designing, implementing, and maintaining multiple Facebook-based psychological studies that attracted over 10 million participants, we demonstrate how to recruit participants using Facebook, incentivize them effectively, and maximize their engagement. We also outline the most important opportunities and challenges associated with using Facebook for research, provide several practical guidelines on how to successfully implement studies on Facebook, and finally, discuss ethical considerations. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

OARSI Clinical Trials Recommendations: Design and conduct of clinical trials for primary prevention of osteoarthritis by joint injury prevention in sport and recreation.

PubMed

Emery, C A; Roos, E M; Verhagen, E; Finch, C F; Bennell, K L; Story, B; Spindler, K; Kemp, J; Lohmander, L S

2015-05-01

The risk of post-traumatic osteoarthritis (PTOA) substantially increases following joint injury. Research efforts should focus on investigating the efficacy of preventative strategies in high quality randomized controlled trials (RCT). The objective of these OARSI RCT recommendations is to inform the design, conduct and analytical approaches to RCTs evaluating the preventative effect of joint injury prevention strategies. Recommendations regarding the design, conduct, and reporting of RCTs evaluating injury prevention interventions were established based on the consensus of nine researchers internationally with expertise in epidemiology, injury prevention and/or osteoarthritis (OA). Input and resultant consensus was established through teleconference, face to face and email correspondence over a 1 year period. Recommendations for injury prevention RCTs include context specific considerations regarding the research question, research design, study participants, randomization, baseline characteristics, intervention, outcome measurement, analysis, implementation, cost evaluation, reporting and future considerations including the impact on development of PTOA. Methodological recommendations for injury prevention RCTs are critical to informing evidence-based practice and policy decisions in health care, public health and the community. Recommendations regarding the interpretation and conduct of injury prevention RCTs will inform the highest level of evidence in the field. These recommendations will facilitate between study comparisons to inform best practice in injury prevention that will have the greatest public health impact. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Amateur Telescope Making

NASA Astrophysics Data System (ADS)

Tonkin, Stephen

Many amateur astronomers make their own instruments, either because of financial considerations or because they are just interested. Amateur Telescope Making offers a variety of designs for telescopes, mounts and drives which are suitable for the home-constructor. The designs range from simple to advanced, but all are within the range of a moderately well-equipped home workshop. The book not only tells the reader what he can construct, but also what it is sensible to construct given what time is available commercially. Thus each chapter begins with reasons for undertaking the project, then looks at theoretical consideration before finishing with practical instructions and advice. An indication is given as to the skills required for the various projects. Appendices list reputable sources of (mail order) materials and components. The telescopes and mounts range from "shoestring" (very cheap) instruments to specialist devices that are unavailable commercially.

Design of arbitrarily homogeneous permanent magnet systems for NMR and MRI: theory and experimental developments of a simple portable magnet.

PubMed

Hugon, Cedric; D'Amico, Francesca; Aubert, Guy; Sakellariou, Dimitris

2010-07-01

Starting from general results of magnetostatics, we give fundamental considerations on the design and characterization of permanent magnets for NMR based on harmonic analysis and symmetry. We then propose a simple geometry that takes advantage of some of these considerations and discuss the practical aspects of the assembly of a real magnet based on this geometry, involving the characterization of its elements, the optimization of the layout and the correction of residual inhomogeneities due to material and geometry imperfections. We report with this low-cost, light-weight magnet (100 euros and 1.8 kg including the aluminum frame) a field of 120 mT (5.1 MHz proton) with a 10 ppm natural homogeneity over a sphere of 1.5 mm in diameter. Copyright (c) 2010 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heeter, J.; Bird, L.; Gelman, R.

Several states are addressing the issue of net metering program caps, which limit the total amount of net metered generating capacity that can be installed in a state or utility service territory. In this analysis, we examine net metering caps to gain perspective on how long net metering will be available in various jurisdictions under current policies. We also surveyed state practices and experience to understand important policy design considerations.

Species Identification and Design Value Estimation of Wooden Members in Covered Bridges

Treesearch

Alex C. Wiedenhoeft; David E. Kretschmann

2014-01-01

Covered timber bridges are historic structures with unique aesthetic value. To preserve this value and maintain bridges in service, robust evaluation of their performance and safety is necessary. The strength of the timber found in covered bridges can vary considerably, not only because of age and condition, but also because of species and grade. For the practicing...

Commonalities and Differences among Lesbian, Gay, and Bisexual College Students: Considerations for Research and Practice

ERIC Educational Resources Information Center

Dugan, John P.; Yurman, Lauren

2011-01-01

This study explores the appropriateness of collapsing lesbian, gay, and bisexual (LGB) college students into a single category in quantitative research designs as well as the nature of their engagement with the collegiate environment. Data were collected as part of a national study and represent a total of 980 LGB self-identified college students…

Designing Modern Dance Classes for the Mature Mover: Physiological and Psychological Considerations

ERIC Educational Resources Information Center

Brodie, Julie A.; Lobel, Elin E.

2016-01-01

Dancers are continuing to dance longer due to changes in technique and increased awareness of the body and safe movement practices. Even after performing careers have ended, it is healthy both physically and emotionally for dancers to continue to take technique class, particularly if they are teaching dance classes. It can be a challenge, however,…

Longitudinal Relationships between Reading and Spelling in Early Elementary Grades: Testing Causality Using a Cross-Lagged Panel Design

ERIC Educational Resources Information Center

Forrester, Ekaterina Petrovna

2013-01-01

Although considerable research has focused on the nature of reading-spelling relationships and its implications for practice, most of the literature is outdated, having been published in 1980s and 1990s. Moreover, limitations in the research base inhibit the full understanding of how reading and spelling development influence each other at…

Thinning and riparian buffer configuration effects on down wood abundance in headwater streams in coniferous forests

Treesearch

Adrian Ares; Deanna H. Olson; Klaus J. Puettmann

2013-01-01

Down wood is associated with the function, structure, and diversity of riparian systems. Considerable knowledge has been generated regarding down wood stocks and dynamics in temperate forests, but there are few studies on effects of silvicultural practices and riparian buffer design on down wood, particularly in headwater streams. We analyzed interactive eff ects of...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dolen, James; Harris, Philip; Marzani, Simone

Here, we explore the scale-dependence and correlations of jet substructure observables to improve upon existing techniques in the identification of highly Lorentz-boosted objects. Modified observables are designed to remove correlations from existing theoretically well-understood observables, providing practical advantages for experimental measurements and searches for new phenomena. We study such observables in W jet tagging and provide recommendations for observables based on considerations beyond signal and background efficiencies.

Mass of materials: the impact of designers on construction ergonomics.

PubMed

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

NASA Space Mechanisms Handbook: Lessons Learned Documented

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1999-01-01

The need to improve space mechanism reliability is underscored by a long history of flight failures and anomalies caused by malfunctioning mechanisms on spacecraft and launch vehicles. Some examples of these failures are listed in a table. Because much experience has been gained over the years, many specialized design practices have evolved and many unsatisfactory design approaches have been identified.NASA and the NASA Lewis Research Center conducted a Lessons Learned Study (refs. 1 and 2) and wrote a handbook to document what has been learned in the past. The primary goals of the handbook were to identify desirable and undesirable design practices for space mechanisms and to reduce the number of failures caused by the repetition of past design errors. Another goal was to identify a variety of design approaches for specific applications and to provide the associated considerations and caveats for each approach in an effort to help designers choose the approach most suitable for each application. This technical summary outlines the goals and objectives of the handbook and study as well as the contents of the handbook.

Optimal designs for copula models

PubMed Central

Perrone, E.; Müller, W.G.

2016-01-01

Copula modelling has in the past decade become a standard tool in many areas of applied statistics. However, a largely neglected aspect concerns the design of related experiments. Particularly the issue of whether the estimation of copula parameters can be enhanced by optimizing experimental conditions and how robust all the parameter estimates for the model are with respect to the type of copula employed. In this paper an equivalence theorem for (bivariate) copula models is provided that allows formulation of efficient design algorithms and quick checks of whether designs are optimal or at least efficient. Some examples illustrate that in practical situations considerable gains in design efficiency can be achieved. A natural comparison between different copula models with respect to design efficiency is provided as well. PMID:27453616

Quantitative morphology of the vascularisation of organs: A stereological approach illustrated using the cardiac circulation.

PubMed

Mühlfeld, Christian

2014-01-01

The vasculature of the heart is able to adapt to various physiological and pathological stimuli and its failure to do so is well-reflected by the great impact of ischaemic heart disease on personal morbidity and mortality and on the health care systems of industrial countries. Studies on physiological or genetic interventions as well as therapeutic angiogenesis rely on quantitative data to characterize the effects in a statistically robust way. The gold standard for obtaining quantitative morphological data is design-based stereology which allows the estimation of volume, surface area, length and number of blood vessels as well as their thickness, diameter or wall composition. Unfortunately, the use of stereological methods for this purpose is still rare. One of the reasons for this is the fact that the transfer of the theoretical foundations into laboratory practice requires a remarkable amount of considerations before touching the first piece of tissue. These considerations, however, are often based on already acquired experience and are usually not dealt with in stereological review articles. The present article therefore delineates the procedures for estimating the most important characteristics of the cardiac vasculature and highlights potential problems and their practical solutions. Worked examples are used to illustrate the methods and provide examples of the calculations. Hopefully, the considerations and examples contained herein will provide researchers in this field with the necessary equipment to add stereological methods to their study designs. Copyright © 2012 Elsevier GmbH. All rights reserved.

Applications of space teleoperator technology to the problems of the handicapped

NASA Technical Reports Server (NTRS)

Malone, T. B.; Deutsch, S.; Rubin, G.; Shenk, S. W.

1973-01-01

The identification of feasible and practical applications of space teleoperator technology for the problems of the handicapped were studied. A teleoperator system is defined by NASA as a remotely controlled, cybernetic, man-machine system designed to extend and augment man's sensory, manipulative, and locomotive capabilities. Based on a consideration of teleoperator systems, the scope of the study was limited to an investigation of these handicapped persons limited in sensory, manipulative, and locomotive capabilities. If the technology being developed for teleoperators has any direct application, it must be in these functional areas. Feasible and practical applications of teleoperator technology for the problems of the handicapped are described, and design criteria are presented with each application. A development plan is established to bring the application to the point of use.

Maximizing ecological and evolutionary insight in bisulfite sequencing data sets

PubMed Central

Lea, Amanda J.; Vilgalys, Tauras P.; Durst, Paul A.P.; Tung, Jenny

2017-01-01

Preface Genome-scale bisulfite sequencing approaches have opened the door to ecological and evolutionary studies of DNA methylation in many organisms. These approaches can be powerful. However, they introduce new methodological and statistical considerations, some of which are particularly relevant to non-model systems. Here, we highlight how these considerations influence a study’s power to link methylation variation with a predictor variable of interest. Relative to current practice, we argue that sample sizes will need to increase to provide robust insights. We also provide recommendations for overcoming common challenges and an R Shiny app to aid in study design. PMID:29046582

Theoretical and Practical Considerations for Combating Mental Illness Stigma in Health Care.

PubMed

Ungar, Thomas; Knaak, Stephanie; Szeto, Andrew C H

2016-04-01

Reducing the stigma and discrimination associated with mental illness is becoming an increasingly important focus for research, policy, programming and intervention work. While it has been well established that the healthcare system is one of the key environments in which persons with mental illnesses experience stigma and discrimination there is little published literature on how to build and deliver successful anti-stigma programs in healthcare settings, towards healthcare providers in general, or towards specific types of practitioners. Our paper intends to address this gap by providing a set of theoretical considerations for guiding the design and implementation of anti-stigma interventions in healthcare.

Practical input optimization for aircraft parameter estimation experiments. Ph.D. Thesis, 1990

NASA Technical Reports Server (NTRS)

Morelli, Eugene A.

1993-01-01

The object of this research was to develop an algorithm for the design of practical, optimal flight test inputs for aircraft parameter estimation experiments. A general, single pass technique was developed which allows global optimization of the flight test input design for parameter estimation using the principles of dynamic programming with the input forms limited to square waves only. Provision was made for practical constraints on the input, including amplitude constraints, control system dynamics, and selected input frequency range exclusions. In addition, the input design was accomplished while imposing output amplitude constraints required by model validity and considerations of safety during the flight test. The algorithm has multiple input design capability, with optional inclusion of a constraint that only one control move at a time, so that a human pilot can implement the inputs. It is shown that the technique can be used to design experiments for estimation of open loop model parameters from closed loop flight test data. The report includes a new formulation of the optimal input design problem, a description of a new approach to the solution, and a summary of the characteristics of the algorithm, followed by three example applications of the new technique which demonstrate the quality and expanded capabilities of the input designs produced by the new technique. In all cases, the new input design approach showed significant improvement over previous input design methods in terms of achievable parameter accuracies.

A vision for chronic disease prevention intervention research: report from a workshop.

PubMed

Ashbury, Frederick D; Little, Julian; Ioannidis, John P A; Kreiger, Nancy; Palmer, Lyle J; Relton, Clare; Taylor, Peter

2014-04-17

The Population Studies Research Network of Cancer Care Ontario hosted a strategic planning workshop to establish an agenda for a prevention intervention research program in Ontario, including priority topics for investigation and design considerations. The two-day workshop included: presentations on background papers developed to facilitate participants' preparation for and discussions in the workshop; keynote presentations on intervention research concerning primary prevention of chronic diseases, design and study implementation considerations; a dedicated session on critical and creative thinking to stimulate participation and discussion topics; break out groups to identify, discuss and present study ideas, designs, implementation considerations; and a consensus process to discuss and identify recommendations for research priorities and next steps. The retreat yielded the following recommendations: 1) develop an intervention research agenda that includes working with existing large-scale cohorts; 2) develop an intervention research agenda that includes novel research designs that could target individuals or groups; and 3) develop an intervention research agenda in which studies collect data on costs, define stakeholders, and ensure clear strategies for stakeholder engagement and knowledge transfer. The Population Studies Research Network will develop options from these recommendations and release a call for proposals in 2014 for intervention research pilot projects that reflect these recommendations. Pilot projects will be evaluated based on their fit with the retreat's recommendations, and their potential to scale up to full studies and application in practice.

Considerations for the design, analysis and presentation of in vivo studies.

PubMed

Ranstam, J; Cook, J A

2017-03-01

To describe, explain and give practical suggestions regarding important principles and key methodological challenges in the study design, statistical analysis, and reporting of results from in vivo studies. Pre-specifying endpoints and analysis, recognizing the common underlying assumption of statistically independent observations, performing sample size calculations, and addressing multiplicity issues are important parts of an in vivo study. A clear reporting of results and informative graphical presentations of data are other important parts. Copyright © 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Low and medium heating value coal gas catalytic combustor characterization

NASA Technical Reports Server (NTRS)

Schwab, J. A.

1982-01-01

Catalytic combustion with both low and medium heating value coal gases obtained from an operating gasifier was demonstrated. A practical operating range for efficient operation was determined, and also to identify potential problem areas were identified for consideration during stationary gas turbine engine design. The test rig consists of fuel injectors, a fuel-air premixing section, a catalytic reactor with thermocouple instrumentation and a single point, water cooled sample probe. The test rig included inlet and outlet transition pieces and was designed for installation into an existing test loop.

New Approaches in Usable Booster System Life Cycle Cost Modeling

DTIC Science & Technology

2012-01-01

the more visible technology products . Organizational considerations, processes/practices, and indirect costs are traditionally derived (“wrapped...only by relationship to tangible product characteristics. This traditional approach works well as long as it is understood that no significant changes...from the traditional product or “what” centered view into “how”. This early exploratory work showed how (1) design/technology, (2) reliability and (3

Professional Development during a Period of Change: A Small-Scale Case Study Exploring the Effect of Context on Practice in a South African Rural School

ERIC Educational Resources Information Center

Bryan, Chris

2011-01-01

Education in post-apartheid South Africa has undergone considerable change in recent years and is seen as providing the key to reform and social transformation. However, despite many government policies designed to improve the quality of teaching and learning, education continues to present challenges, particularly within the area of professional…

Magnetic refrigeration in space - Practical considerations

NASA Technical Reports Server (NTRS)

Kittel, P.

1980-01-01

Various schemes of using adiabatic demagnetization to provide refrigeration in the 10-1000 mK range are discussed with particular reference to the requirements for use in space. The methods considered are complete demagnetization, isothermal demagnetization, moving magnet demagnetization, and continuous refrigeration. The requirements that are important for use in space are low mass, low power dissipation, high mechanical rigidity, modular design, and ease of use.

Axial superchargers

NASA Technical Reports Server (NTRS)

Betz, A

1944-01-01

Improvements, however, have been attained which permit a shortening of the structure without any impairment of the efficiency. The axial supercharger has a better efficiency and a simpler design than the radial supercharger. The relatively narrow range in which it operates satisfactorily should not be a very disturbing factor for practical flight problems. The length of this type of supercharger may be reduced considerably if some impairment in the efficiency is permitted.

Experimental design and quantitative analysis of microbial community multiomics.

PubMed

Mallick, Himel; Ma, Siyuan; Franzosa, Eric A; Vatanen, Tommi; Morgan, Xochitl C; Huttenhower, Curtis

2017-11-30

Studies of the microbiome have become increasingly sophisticated, and multiple sequence-based, molecular methods as well as culture-based methods exist for population-scale microbiome profiles. To link the resulting host and microbial data types to human health, several experimental design considerations, data analysis challenges, and statistical epidemiological approaches must be addressed. Here, we survey current best practices for experimental design in microbiome molecular epidemiology, including technologies for generating, analyzing, and integrating microbiome multiomics data. We highlight studies that have identified molecular bioactives that influence human health, and we suggest steps for scaling translational microbiome research to high-throughput target discovery across large populations.

Orbital design strategy for domestic communication satellite systems.

NASA Technical Reports Server (NTRS)

Ramji, S.; Sawitz, P.

1973-01-01

Review of some of the considerations pertinent to efficient orbit utilization in the design of domestic communications satellite systems. A strategy is developed to efficiently locate a heterogeneous system of satellites within the available arc and provide room for future growth. A practical design is illustrated, using a computer simulation model, for the placement of 25 satellites within 73% of the available arc employing frequency and polarization coordination techniques. A number of widely variable factors that influence satellite spacing are examined. These factors include such critical system elements as telephony and television interference noise limits, frequency plan coordination, polarization plan coordination, ground antenna diameter, signal protection ratio, and satellite station keeping.

NGDS User Centered Design Meeting the Needs of the Geothermal Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Suzanne; Zheng, Sam; Patten, Kim

2013-10-15

In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineer- ing the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been research based, highly collabora- tive, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

NGDS USER CENTERED DESIGN MEETING THE NEEDS OF THE GEOTHERMAL COMMUNITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Suzanne; Zheng, Sam Xianjun; Patten, Kim

In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineering the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been researched based, highly collaborative, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

Rehabilitation of people with spinal cord damage due to tumor: literature review, international survey and practical recommendations for optimizing their rehabilitation

PubMed Central

Marshall, Ruth; Stubblefield, Michael D.; Scivoletto, Giorgio

2017-01-01

Background People with spinal cord dysfunction (SCDys) due to tumor (benign and malignant) pose enormous rehabilitation challenges. Objectives were: conduct literature search regarding epidemiology, clinical features and outcomes for SCDys due to tumor following rehabilitation, the ideal setting for rehabilitation and practical considerations for rehabilitation; and propose framework and practical considerations for managing people with SCDys due to tumor in spinal rehabilitation units (SRUs). Design Survey of rehabilitation health care professionals, consensus opinion from experts and literature search. Setting Workshop at International Spinal Cord Society and American Spinal Injury Association combined annual meeting, May 16, 2015, Montréal, Canada. Participants Workshop attendees and experts in the rehabilitation of people with SCDys due to tumor. Outcomes Measures Reports of services offered to people with SCDys due to tumor, including whether those with benign and malignant tumors are admitted into rehabilitation, any admission criteria used and the rational for declining admission. Results Most respondents (n = 33, 83%) reported that people with benign tumors were routinely admitted for rehabilitation but only 18 (45%) reported that people with malignant tumors were routinely admitted. A range of criteria and reasons for declining admission were given. Evidence from the literature and the opinion of experts support the admission of people with SCDys due to tumor into specialist SRUs. Conclusions A framework and practical considerations for managing people with SCDys due to tumor in SRUs are proposed. Patients with tumor causing SCDys should be given greater access to specialist SRU in order to achieve the best outcomes. PMID:27088581

Principles and Benefits of Explicitly Designed Medical Device Safety Architecture.

PubMed

Larson, Brian R; Jones, Paul; Zhang, Yi; Hatcliff, John

The complexity of medical devices and the processes by which they are developed pose considerable challenges to producing safe designs and regulatory submissions that are amenable to effective reviews. Designing an appropriate and clearly documented architecture can be an important step in addressing this complexity. Best practices in medical device design embrace the notion of a safety architecture organized around distinct operation and safety requirements. By explicitly separating many safety-related monitoring and mitigation functions from operational functionality, the aspects of a device most critical to safety can be localized into a smaller and simpler safety subsystem, thereby enabling easier verification and more effective reviews of claims that causes of hazardous situations are detected and handled properly. This article defines medical device safety architecture, describes its purpose and philosophy, and provides an example. Although many of the presented concepts may be familiar to those with experience in realization of safety-critical systems, this article aims to distill the essence of the approach and provide practical guidance that can potentially improve the quality of device designs and regulatory submissions.

Engine System Loads Analysis Compared to Hot-Fire Data

NASA Technical Reports Server (NTRS)

Frady, Gregory P.; Jennings, John M.; Mims, Katherine; Brunty, Joseph; Christensen, Eric R.; McConnaughey, Paul R. (Technical Monitor)

2002-01-01

Early implementation of structural dynamics finite element analyses for calculation of design loads is considered common design practice for high volume manufacturing industries such as automotive and aeronautical industries. However with the rarity of rocket engine development programs starts, these tools are relatively new to the design of rocket engines. In the NASA MC-1 engine program, the focus was to reduce the cost-to-weight ratio. The techniques for structural dynamics analysis practices, were tailored in this program to meet both production and structural design goals. Perturbation of rocket engine design parameters resulted in a number of MC-1 load cycles necessary to characterize the impact due to mass and stiffness changes. Evolution of loads and load extraction methodologies, parametric considerations and a discussion of load path sensitivities are important during the design and integration of a new engine system. During the final stages of development, it is important to verify the results of an engine system model to determine the validity of the results. During the final stages of the MC-1 program, hot-fire test results were obtained and compared to the structural design loads calculated by the engine system model. These comparisons are presented in this paper.

Large eddy simulation applications in gas turbines.

PubMed

Menzies, Kevin

2009-07-28

The gas turbine presents significant challenges to any computational fluid dynamics techniques. The combination of a wide range of flow phenomena with complex geometry is difficult to model in the context of Reynolds-averaged Navier-Stokes (RANS) solvers. We review the potential for large eddy simulation (LES) in modelling the flow in the different components of the gas turbine during a practical engineering design cycle. We show that while LES has demonstrated considerable promise for reliable prediction of many flows in the engine that are difficult for RANS it is not a panacea and considerable application challenges remain. However, for many flows, especially those dominated by shear layer mixing such as in combustion chambers and exhausts, LES has demonstrated a clear superiority over RANS for moderately complex geometries although at significantly higher cost which will remain an issue in making the calculations relevant within the design cycle.

Mitigating shear lag in tall buildings

NASA Astrophysics Data System (ADS)

Gaur, Himanshu; Goliya, Ravindra K.

2015-09-01

As the height of building increases, effect of shear lag also becomes considerable in the design of high-rise buildings. In this paper, shear lag effect in tall buildings of heights, i.e., 120, 96, 72, 48 and 36 stories of which aspect ratio ranges from 3 to 10 is studied. Tube-in-tube structural system with façade bracing is used for designing the building of height 120 story. It is found that bracing system considerably reduces the shear lag effect and hence increases the building stiffness to withstand lateral loads. Different geometric patterns of bracing system are considered. The best effective geometric configuration of bracing system is concluded in this study. Lateral force, as wind load is applied on the buildings as it is the most dominating lateral force for such heights. Wind load is set as per Indian standard code of practice IS 875 Part-3. For analysis purpose SAP 2000 software program is used.

Technology, design and dementia: an exploratory survey of developers.

PubMed

Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

2017-08-01

Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

Designing Adaptive Low-Dissipative High Order Schemes for Long-Time Integrations. Chapter 1

NASA Technical Reports Server (NTRS)

Yee, Helen C.; Sjoegreen, B.; Mansour, Nagi N. (Technical Monitor)

2001-01-01

A general framework for the design of adaptive low-dissipative high order schemes is presented. It encompasses a rather complete treatment of the numerical approach based on four integrated design criteria: (1) For stability considerations, condition the governing equations before the application of the appropriate numerical scheme whenever it is possible; (2) For consistency, compatible schemes that possess stability properties, including physical and numerical boundary condition treatments, similar to those of the discrete analogue of the continuum are preferred; (3) For the minimization of numerical dissipation contamination, efficient and adaptive numerical dissipation control to further improve nonlinear stability and accuracy should be used; and (4) For practical considerations, the numerical approach should be efficient and applicable to general geometries, and an efficient and reliable dynamic grid adaptation should be used if necessary. These design criteria are, in general, very useful to a wide spectrum of flow simulations. However, the demand on the overall numerical approach for nonlinear stability and accuracy is much more stringent for long-time integration of complex multiscale viscous shock/shear/turbulence/acoustics interactions and numerical combustion. Robust classical numerical methods for less complex flow physics are not suitable or practical for such applications. The present approach is designed expressly to address such flow problems, especially unsteady flows. The minimization of employing very fine grids to overcome the production of spurious numerical solutions and/or instability due to under-resolved grids is also sought. The incremental studies to illustrate the performance of the approach are summarized. Extensive testing and full implementation of the approach is forthcoming. The results shown so far are very encouraging.

The lived experience of being a speech-language therapist in the Western Cape public health service.

PubMed

Warden, Jocelyn A; Mayers, Patricia; Kathard, Harsha

2008-01-01

This study explores the lived experience of being a Speech-Language Therapist (S-L Therapist) in the South African Western Cape public health service. The lived experience of seven S-L Therapists with varied clinical experience was illuminated using a qualitative phenomenological research design. S-L Therapists, working in the three Western Cape tertiary hospitals, provided an in-depth account of their experiences as S-L Therapists. The audio recorded interviews were transcribed verbatim and analysed using an adaptation of Colaizzi's (1978) method of analysis. The rigour and trustworthiness of the research process was informed by consideration of issues of credibility, applicability, confirmability and dependability as they relate to phenomenological design. Five main themes emerged from data analysis: expectations of practice and practice realities; being part of the "underdog" profession: role definition and status; being connected; the holistic nature of the S-L Therapist's practice; and erosion or promotion.The implications for training and support of S-L Therapists by managers and policymakers and peers are highlighted.

Best practices for preventing musculoskeletal disorders in masonry: stakeholder perspectives.

PubMed

Entzel, Pamela; Albers, Jim; Welch, Laura

2007-09-01

Brick masons and mason tenders report a high prevalence of work-related musculoskeletal disorders (WMSDs), many of which can be prevented with changes in materials, work equipment or work practices. To explore the use of "best practices" in the masonry industry, NIOSH organized a 2-day meeting of masonry stakeholders. Attendees included 30 industry representatives, 5 health and safety researchers, 4 health/safety specialists, 2 ergonomic consultants, and 2 representatives of state workers' compensation programs. Small groups discussed ergonomic interventions currently utilized in the masonry industry, including factors affecting intervention implementation and ways to promote diffusion of interventions. Meeting participants also identified various barriers to intervention implementation, including business considerations, quality concerns, design issues, supply problems, jobsite conditions and management practices that can slow or limit intervention diffusion. To be successful, future diffusion efforts must not only raise awareness of available solutions but also address these practical concerns.

Ethical challenges in developing drugs for psychiatric disorders.

PubMed

Carrier, Felix; Banayan, David; Boley, Randy; Karnik, Niranjan

2017-05-01

As the classification of mental disorders advances towards a disease model as promoted by the National Institute of Mental Health (NIMH) Research Domain Criteria (RDoC), there is hope that a more thorough neurobiological understanding of mental illness may allow clinicians and researchers to determine treatment efficacy with less diagnostic variability. This paradigm shift has presented a variety of ethical issues to be considered in the development of psychiatric drugs. These challenges are not limited to informed consent practices, industry funding, and placebo use. The consideration for alternative research models and quality of research design also present ethical challenges in the development of psychiatric drugs. The imperatives to create valid and sound research that justify the human time, cost, risk and use of limited resources must also be considered. Clinical innovation, and consideration for special populations are also important aspects to take into account. Based on the breadth of these ethical concerns, it is particularly important that scientific questions regarding the development of psychiatric drugs be answered collaboratively by a variety of stakeholders. As the field expands, new ethical considerations will be raised with increased focus on genetic markers, personalized medicine, patient-centered outcomes research, and tension over funding. We suggest that innovation in trial design is necessary to better reflect practices in clinical settings and that there must be an emphasized focus on expanding the transparency of consent processes, regard for suicidality, and care in working with special populations to support the goal of developing sound psychiatric drug therapies. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Modeling workflow to design machine translation applications for public health practice

PubMed Central

Turner, Anne M.; Brownstein, Megumu K.; Cole, Kate; Karasz, Hilary; Kirchhoff, Katrin

2014-01-01

Objective Provide a detailed understanding of the information workflow processes related to translating health promotion materials for limited English proficiency individuals in order to inform the design of context-driven machine translation (MT) tools for public health (PH). Materials and Methods We applied a cognitive work analysis framework to investigate the translation information workflow processes of two large health departments in Washington State. Researchers conducted interviews, performed a task analysis, and validated results with PH professionals to model translation workflow and identify functional requirements for a translation system for PH. Results The study resulted in a detailed description of work related to translation of PH materials, an information workflow diagram, and a description of attitudes towards MT technology. We identified a number of themes that hold design implications for incorporating MT in PH translation practice. A PH translation tool prototype was designed based on these findings. Discussion This study underscores the importance of understanding the work context and information workflow for which systems will be designed. Based on themes and translation information workflow processes, we identified key design guidelines for incorporating MT into PH translation work. Primary amongst these is that MT should be followed by human review for translations to be of high quality and for the technology to be adopted into practice. Counclusion The time and costs of creating multilingual health promotion materials are barriers to translation. PH personnel were interested in MT's potential to improve access to low-cost translated PH materials, but expressed concerns about ensuring quality. We outline design considerations and a potential machine translation tool to best fit MT systems into PH practice. PMID:25445922

Municipal officials' perceived barriers to consideration of physical activity in community design decision making.

PubMed

Goins, Karin Valentine; Schneider, Kristin L; Brownson, Ross; Carnoske, Cheryl; Evenson, Kelly R; Eyler, Amy; Heinrich, Katie; Litt, Jill; Lyn, Rodney; Maddock, Jay; Reed, Hannah; Tompkins, Nancy Oʼhara; Lemon, Stephenie C

2013-01-01

Built environment-focused interventions and policies are recommended as sustainable approaches for promoting physical activity. Physical activity has not traditionally been considered in land use and transportation decision making. Effective collaboration with non-public health partners requires knowledge of their perceived barriers to such consideration. This analysis sought to (a) establish prevalence estimates of selected barriers to the consideration of physical activity in community design and layout decisions and (b) describe how barrier reporting by public health officials differs from other municipal officials among a wide range of job functions and departments in a geographically diverse sample. A Web-based survey was conducted among municipal officials in 94 cities and towns with populations of at least 50 000 residents in 8 states. A total of 453 municipal officials from public health, planning, transportation/public works, community and economic development, parks and recreation, city management, and municipal legislatures in 83 cities and towns responded to the survey. Five barriers to consideration of physical activity in community design and layout were assessed. The most common barriers included lack of political will (23.5%), limited staff (20.4%), and lack of collaboration across municipal departments (16.2%). Fewer participants reported opposition from the business community or residents as barriers. Public health department personnel were more likely to report the barriers of limited staff and lack of collaboration across municipal departments than other professionals. They were also more likely to report lack of political will than city managers or mayors and municipal legislators. Barriers to increasing consideration of physical activity in decision making about community design and layout are encouragingly low. Implications for public health practice include the need to strategically increase political will despite public health staffing constraints and perceived lack of collaboration with relevant departments such as planning and public works/transportation.

Routines, roles, and responsibilities for aligning scientific and classroom practices

NASA Astrophysics Data System (ADS)

Ford, Michael J.; Wargo, Brian M.

2007-01-01

Reform efforts in science education have focused on engaging students in authentic scientific practices. For these efforts to succeed, detailed articulations of scientific practice need to be linked to understandings of classroom practice. Here we characterize engagement in practice generally in terms of 3Rs: routines, roles, and responsibilities. We argue that there is a misalignment between the 3Rs of scientific practice and the practices common in classrooms, and that this misalignment poses a considerable obstacle for beginning teachers who attempt to implement reform pedagogy. As part of a secondary methods course, 16 preservice teachers (PSTs) participated in two exemplar activities designed to engage them in scientific practices. The PST performances suggest that at least initially, they did not consider authentic scientific practices appropriate for classroom activities, implying a pedagogical repertoire dominated by the 3Rs of traditional classrooms. PST performances, however, evidenced a shift in the 3Rs from those common in classrooms to those required by these activities, suggesting that their visions for classrooms are malleable and underlining the importance of aligning the 3Rs of scientific and classroom practices during teacher preparation.

A study of the problem of designing airplanes with satisfactory inherent damping of the dutch roll oscillation

NASA Technical Reports Server (NTRS)

Campbell, John P; Mckinney, Marion O , Jr

1954-01-01

Considerable interest has recently been shown in means of obtaining satisfactory stability of the dutch roll oscillation for modern high-performance airplanes without resort to complicated artificial stabilizing devices. One approach to this problem is to lay out the airplane in the earliest stages of design so that it will have the greatest practicable inherent stability of the lateral oscillation. The present report presents some preliminary results of a theoretical analysis to determine the design features that appear most promising in providing adequate inherent stability. These preliminary results cover the case of fighter airplanes at subsonic speeds. The investigation indicated that it is possible to design fighter airplanes to have substantially better inherent stability than most current designs. Since the use of low-aspect-ratio swept-back wings is largely responsible for poor dutch roll stability, it is important to design the airplane with the maximum aspect ratio and minimum sweep that will permit attainment of the desired performance. The radius of gyration in roll should be kept as low as possible and the nose-up inclination of the principal longitudinal axis of inertia should be made as great as practicable. (author)

Foundations of Observation: Considerations for Developing a Classroom Observation System That Helps Districts Achieve Consistent and Accurate Scores. MET Project, Policy and Practice Brief

ERIC Educational Resources Information Center

Joe, Jilliam N.; Tocci, Cynthia M.; Holtzman, Steven L.; Williams, Jean C.

2013-01-01

The purpose of this paper is to provide states and school districts with processes they can use to help ensure high-quality data collection during teacher observations. Educational Testing Service's (ETS's) goal in writing it is to share the knowledge and expertise they gained: (1) from designing and implementing scoring processes for the Measures…

Testing vaccines in pediatric research subjects.

PubMed

Jacobson, Robert M; Ovsyannikova, Inna G; Poland, Gregory A

2009-05-26

Past difficulties encountered in pediatric vaccine research have positively influenced the development of modern regulations of human subjects' research. These regulations permit pediatric research but impose special restrictions on the types of studies to which children may participate, and these restrictions have important implications for modern vaccine trials. These ethical issues pose real but surmountable concerns. Considerations also include the use of placebos, critical for trial design but an impediment to parental permission. Recent pediatric vaccine studies illustrate practical alternatives to placebos that preserve allocation concealment and blinding yet obtain parental support. Vaccine researchers must consider the role parents play, not just in giving formal permission for their children's participation, but also for their roles in active recruitment, successful retention, and data acquisition. Studies of parents' attitudes do identify consistencies among motivating forces that drive parents to participate or refuse their children's participation. These studies should influence how we design and execute pediatric vaccine trials. Finally, ethical considerations and current regulations raise certain issues concerning the remuneration of the research volunteer when that volunteer is a child. The published literature illustrates wide variation in practice. Better understanding of the restrictions in pediatric research, the use of placebos, the attitude of parents, and the concerns with remuneration can better equip the vaccine researcher in pursuing successful studies in children.

``GodMode is his video game name'': situating learning and identity in structures of social practice

NASA Astrophysics Data System (ADS)

Bricker, Leah A.; Bell, Philip

2012-12-01

In this paper, we report on the structural nexus of one youth's gaming practices across contexts and over time. We utilize data from an ethnography of youth science and technology learning, as well as expertise development, across settings and developmental time. We use Ole Dreier's theory of persons to understand how this youth is able to develop considerable gaming expertise. Additionally, we explicate the learning practices embedded in the structural nexus of this youth's gaming and we examine associated issues of learning and identity. We problematize the lack of continuity between his formal schooling experiences and the structural nexus of his gaming practices as situated in a variety of other contexts and we reflect on the implications for the design of STEM gaming experiences in formal school environments.

Frequent attenders in general practice care: a literature review with special reference to methodological considerations.

PubMed

Vedsted, P; Christensen, M B

2005-02-01

To describe the basis on which our knowledge of frequent attendance in general practice rests and to propose recommendations for further research on frequent attenders (FAs). The literature review (finished February 2004) encompassed peer-reviewed articles in English describing contacts with general practice in terms of frequency. Searches were performed in the Medline, CINAHL, EMBASE, PsycINFO, Social Sciences Expanded Index and ISI Citation databases with additional searches in reference lists and the 'related articles' function in the ISI Citation database and Medline. General practice. Sixty-one articles (54 studies). The articles were assessed according to the following design variables: setting; definition of FAs; sampling; sample size; control groups; study aim; study design; data sources; effect measure; and main results. There was no generally accepted definition of frequent attendance. Research designs differed substantially. Eight articles gave sufficient information on all design variables. The top 10% of attenders accounted for 30-50% of all contacts, and up to 40% of FAs were still FAs the following year. More than 50% of FAs had a physical disease, more than 50% of FAs suffered from psychological distress, social factors (low social support, unemployment, divorce) were associated with frequent attendance in more than 50% of FAs, multiproblems (physical, psychological and social) were found in one-third of FAs, and frequent attendance was associated with increasing age and female gender. The diversity of designs, definitions and methods in the current literature on FAs in general practice hampers comparison of their precision, validity and generalizability, and calls for cautious interpretation and adoption of a common, generally acceptable definition in future studies.

Twelve tips for getting started using mixed methods in medical education research.

PubMed

Lavelle, Ellen; Vuk, Jasna; Barber, Carolyn

2013-04-01

Mixed methods research, which is gaining popularity in medical education, provides a new and comprehensive approach for addressing teaching, learning, and evaluation issues in the field. The aim of this article is to provide medical education researchers with 12 tips, based on consideration of current literature in the health professions and in educational research, for conducting and disseminating mixed methods research. Engaging in mixed methods research requires consideration of several major components: the mixed methods paradigm, types of problems, mixed method designs, collaboration, and developing or extending theory. Mixed methods is an ideal tool for addressing a full range of problems in medical education to include development of theory and improving practice.

A needs assessment on addressing environmental health issues within reproductive health service provision: Considerations for continuing education and support.

PubMed

Williamson, Linzi; Sangster, Sarah; Bayly, Melanie; Gibson, Kirstian; Lawson, Karen; Clark, Megan

2017-12-01

This needs assessment was initially undertaken to explore the beliefs and knowledge of nurses and physicians about the impact of environmental toxicants on maternal and infant health, as well as to describe current practice and needs related to addressing environmental health issues (EHI). One hundred and thirty-five nurses (n = 99) and physicians (n = 36) working in Saskatchewan completed an online survey. Survey questions were designed to determine how physicians and nurses think about and incorporate environmental health issues into their practice and means of increasing their capacity to do so. Although participants considered it important to address EHIs with patients, in actual practice they do so with only moderate frequency. Participants reported low levels of knowledge about EHIs' impact on health, and low levels of confidence discussing them with patients. Participants requested additional information on EHIs, especially in the form of online resources. The results suggests that while nurses and physicians consider EHIs important to address with patients, more education, support, and resources would increase their capacity to do so effectively. Based on the findings, considerations and recommendations for continuing education in this area have been provided.

The patient-centered medical home: an ethical analysis of principles and practice.

PubMed

Braddock, Clarence H; Snyder, Lois; Neubauer, Richard L; Fischer, Gary S

2013-01-01

The patient-centered medical home (PCMH), with its focus on patient-centered care, holds promise as a way to reinvigorate the primary care of patients and as a necessary component of health care reform. While its tenets have been the subject of review, the ethical dimensions of the PCMH have not been fully explored. Consideration of the ethical foundations for the core principles of the PCMH can and should be part of the debate concerning its merits. The PCMH can align with the principles of medical ethics and potentially strengthen the patient-physician relationship and aspects of health care that patients value. Patient choice and these ethical considerations are central and at least as important as the economic and practical arguments in support of the PCMH, if not more so. Further, the ethical principles that support key concepts of the PCMH have implications for the design and implementation of the PCMH. This paper explores the PCMH in light of core principles of ethics and professionalism, with an emphasis both on how the concept of the PCMH may reinforce core ethical principles of medical practice and on further implications of these principles.

Theory and practical considerations of multilayer dielectric thin-film stacks in Ag-coated hollow waveguides.

PubMed

Bledt, Carlos M; Melzer, Jeffrey E; Harrington, James A

2014-02-01

This analysis explores the theory and design of dielectric multilayer reflection-enhancing thin film stacks based on high and low refractive index alternating layers of cadmium sulfide (CdS) and lead sulfide (PbS) on silver (Ag)-coated hollow glass waveguides (HGWs) for low loss transmission at midinfrared wavelengths. The fundamentals for determining propagation losses in such multilayer thin-film-coated Ag hollow waveguides is thoroughly discussed, and forms the basis for further theoretical analysis presented in this study. The effects on propagation loss resulting from several key parameters of these multilayer thin film stacks is further explored in order to bridge the gap between results predicted through calculation under ideal conditions and deviations from such ideal models that often arise in practice. In particular, the effects on loss due to the number of dielectric thin film layers deposited, deviation from ideal individual layer thicknesses, and surface roughness related scattering losses are presented and thoroughly investigated. Through such extensive theoretical analysis the level of understanding of the underlying loss mechanisms of multilayer thin-film Ag-coated HGWs is greatly advanced, considerably increasing the potential practical development of next-generation ultralow-loss mid-IR Ag/multilayer dielectric-coated HGWs.

Library design practices for success in lead generation with small molecule libraries.

PubMed

Goodnow, R A; Guba, W; Haap, W

2003-11-01

The generation of novel structures amenable to rapid and efficient lead optimization comprises an emerging strategy for success in modern drug discovery. Small molecule libraries of sufficient size and diversity to increase the chances of discovery of novel structures make the high throughput synthesis approach the method of choice for lead generation. Despite an industry trend for smaller, more focused libraries, the need to generate novel lead structures makes larger libraries a necessary strategy. For libraries of a several thousand or more members, solid phase synthesis approaches are the most suitable. While the technology and chemistry necessary for small molecule library synthesis continue to advance, success in lead generation requires rigorous consideration in the library design process to ensure the synthesis of molecules possessing the proper characteristics for subsequent lead optimization. Without proper selection of library templates and building blocks, solid phase synthesis methods often generate molecules which are too heavy, too lipophilic and too complex to be useful for lead optimization. The appropriate filtering of virtual library designs with multiple computational tools allows the generation of information-rich libraries within a drug-like molecular property space. An understanding of the hit-to-lead process provides a practical guide to molecular design characteristics. Examples of leads generated from library approaches also provide a benchmarking of successes as well as aspects for continued development of library design practices.

Radii effect on the translation spring constant of force transducer beams

NASA Technical Reports Server (NTRS)

Scott, C. E.

1992-01-01

Multi-component strain-gage force transducer design requires the designer to determine the spring constant of the numerous beams or flexures incorporated in the transducer. The classical beam deflection formulae that are used in calculating these spring constants typically assume that the beam has a uniform moment of inertia along the entire beam length. In practice all beams have a radius at the end where the beam interfaces with the shoulder of the transducer, and on short beams in particular this increases the beam spring constant considerably. A Basic computer program utilizing numerical integration is presented to determine this effect.

Design and analysis of aerospace structures at elevated temperatures. [aircraft, missiles, and space platforms

NASA Technical Reports Server (NTRS)

Chang, C. I.

1989-01-01

An account is given of approaches that have emerged as useful in the incorporation of thermal loading considerations into advanced composite materials-based aerospace structural design practices. Sources of structural heating encompass not only propulsion system heat and aerodynamic surface heating at supersonic speeds, but the growing possibility of intense thermal fluxes from directed-energy weapons. The composite materials in question range from intrinsically nonheat-resistant polymer matrix systems to metal-matrix composites, and increasingly to such ceramic-matrix composites as carbon/carbon, which are explicitly intended for elevated temperature operation.

Laboratory and Industrial Ventilation

NASA Technical Reports Server (NTRS)

1972-01-01

This handbook supplements the Facilities Engineering Handbook (NHB 7320.1) and provides additional policies and criteria for uniform application to ventilation systems. It expands basic requirements, provides additional design and construction guidance, and places emphasis on those design considerations which will provide for greater effectiveness in the use of these systems. The provisions of this handbook are applicable to all NASA field installations and the Jet Propulsion Laboratory. Since supply of this handbook is limited, abstracts of the portion or portions applicable to a given requirement will be made for the individual specific needs encountered rather than supplying copies of the handbook as has been past practice.

Adaptive trials for tuberculosis: early reflections on theory and practice.

PubMed

Montgomery, C M

2016-08-01

Adaptive designs (ADs) have been proposed for anti-tuberculosis treatment trials. This call for innovation occurs against the backdrop of fundamental changes in the acceptable evidence base in anti-tuberculosis treatment. To contextualise ADs for tuberculosis (TB) and explore early responses from those working in the field. In this qualitative study investigating processes of theoretical and practical change in randomised controlled trials, 24 interviews were conducted with professionals involved in AD trials, half of whom worked in the TB field. Clinical trialists working on AD trials in TB are positive about the efficiency these designs offer, but remain cautious about their suitability. In addition to technical concerns, informants discussed the challenges of implementing AD in developing countries, including limited regulatory capacity to evaluate proposals, investments needed in infrastructure and site capacity, and challenges regarding informed consent. Respondents identified funding, interdisciplinary communication and regulatory and policy responses as additional concerns potentially affecting the success of AD for TB. Empirical research is needed into patient experiences of AD, including informed consent. Further consideration of the contexts of innovation in trial design is needed. These are fundamental to the successful translation of theory into practice.

Design Considerations in Development of a Mobile Health Intervention Program: The TEXT ME and TEXTMEDS Experience

PubMed Central

Thakkar, Jay; Barry, Tony; Thiagalingam, Aravinda; Redfern, Julie; McEwan, Alistair L; Rodgers, Anthony

2016-01-01

Background Mobile health (mHealth) has huge potential to deliver preventative health services. However, there is paucity of literature on theoretical constructs, technical, practical, and regulatory considerations that enable delivery of such services. Objectives The objective of this study was to outline the key considerations in the development of a text message-based mHealth program; thus providing broad recommendations and guidance to future researchers designing similar programs. Methods We describe the key considerations in designing the intervention with respect to functionality, technical infrastructure, data management, software components, regulatory requirements, and operationalization. We also illustrate some of the potential issues and decision points utilizing our experience of developing text message (short message service, SMS) management systems to support 2 large randomized controlled trials: TEXT messages to improve MEDication adherence & Secondary prevention (TEXTMEDS) and Tobacco, EXercise and dieT MEssages (TEXT ME). Results The steps identified in the development process were: (1) background research and development of the text message bank based on scientific evidence and disease-specific guidelines, (2) pilot testing with target audience and incorporating feedback, (3) software-hardware customization to enable delivery of complex personalized programs using prespecified algorithms, and (4) legal and regulatory considerations. Additional considerations in developing text message management systems include: balancing the use of customized versus preexisting software systems, the level of automation versus need for human inputs, monitoring, ensuring data security, interface flexibility, and the ability for upscaling. Conclusions A merging of expertise in clinical and behavioral sciences, health and research data management systems, software engineering, and mobile phone regulatory requirements is essential to develop a platform to deliver and manage support programs to hundreds of participants simultaneously as in TEXT ME and TEXTMEDS trials. This research provides broad principles that may assist other researchers in developing mHealth programs. PMID:27847350

Design Considerations in Development of a Mobile Health Intervention Program: The TEXT ME and TEXTMEDS Experience.

PubMed

Thakkar, Jay; Barry, Tony; Thiagalingam, Aravinda; Redfern, Julie; McEwan, Alistair L; Rodgers, Anthony; Chow, Clara K

2016-11-15

Mobile health (mHealth) has huge potential to deliver preventative health services. However, there is paucity of literature on theoretical constructs, technical, practical, and regulatory considerations that enable delivery of such services. The objective of this study was to outline the key considerations in the development of a text message-based mHealth program; thus providing broad recommendations and guidance to future researchers designing similar programs. We describe the key considerations in designing the intervention with respect to functionality, technical infrastructure, data management, software components, regulatory requirements, and operationalization. We also illustrate some of the potential issues and decision points utilizing our experience of developing text message (short message service, SMS) management systems to support 2 large randomized controlled trials: TEXT messages to improve MEDication adherence & Secondary prevention (TEXTMEDS) and Tobacco, EXercise and dieT MEssages (TEXT ME). The steps identified in the development process were: (1) background research and development of the text message bank based on scientific evidence and disease-specific guidelines, (2) pilot testing with target audience and incorporating feedback, (3) software-hardware customization to enable delivery of complex personalized programs using prespecified algorithms, and (4) legal and regulatory considerations. Additional considerations in developing text message management systems include: balancing the use of customized versus preexisting software systems, the level of automation versus need for human inputs, monitoring, ensuring data security, interface flexibility, and the ability for upscaling. A merging of expertise in clinical and behavioral sciences, health and research data management systems, software engineering, and mobile phone regulatory requirements is essential to develop a platform to deliver and manage support programs to hundreds of participants simultaneously as in TEXT ME and TEXTMEDS trials. This research provides broad principles that may assist other researchers in developing mHealth programs. ©Jay Thakkar, Tony Barry, Aravinda Thiagalingam, Julie Redfern, Alistair L McEwan, Anthony Rodgers, Clara K Chow. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 15.11.2016.

Interventions in randomised controlled trials in surgery: issues to consider during trial design.

PubMed

Blencowe, Natalie S; Brown, Julia M; Cook, Jonathan A; Metcalfe, Chris; Morton, Dion G; Nicholl, Jon; Sharples, Linda D; Treweek, Shaun; Blazeby, Jane M

2015-09-04

Until recently, insufficient attention has been paid to the fact that surgical interventions are complex. This complexity has several implications, including the way in which surgical interventions are described and delivered in trials. In order for surgeons to adopt trial findings, interventions need to be described in sufficient detail to enable accurate replication; however, it may be permissible to allow some aspects to be delivered according to local practice. Accumulating work in this area has identified the need for general guidance on the design of surgical interventions in trial protocols and reports. Key issues to consider when designing surgical interventions include the identification of each surgical intervention and their components, who will deliver the interventions, and where and how the interventions will be standardised and monitored during the trial. The trial design (pragmatic and explanatory), comparator and stage of innovation may also influence the extent of detail required. Thoughtful consideration of surgical interventions in this way may help with the interpretation of trial results and the adoption of successful interventions into clinical practice.

Organizing a Collaborative Development of Technological Design Requirements Using a Constructive Dialogue on Value Profiles: A Case in Automated Vehicle Development.

PubMed

Flipse, Steven M; Puylaert, Steven

2018-02-01

Following societal and policy pressures for responsible innovation, innovators are more and more expected to consider the broader socio-ethical context of their work, and more importantly, to integrate such considerations into their daily practices. This may require the involvement of 'outsiders' in innovation trajectories, including e.g. societal and governmental actors. However, methods on how to functionally organize such integration in light of responsible innovation have only recently started to emerge. We present an approach to do just that, in which we first develop value profiles of the involved actors, and second, design a workshop setting that allows innovators to develop design requirements in collaboration with representatives of parties that are not usually involved in such innovation design practices. Using a case study in automated vehicle development, we positively demonstrate the possibility and utility of our approach. We stress that in this study we wish to demonstrate the functionality of our developed method, and did not search for scientifically valid outcomes regarding this technical field.

California residential energy standards: problems and recommendations relating to implementation, enforcement, and design. [Thermal insulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-08-01

Documents relevant to the development and implementation of the California energy insulation standards for new residential buildings were evaluated and a survey was conducted to determine problems encountered in the implementation, enforcement, and design aspects of the standards. The impact of the standards on enforcement agencies, designers, builders and developers, manufacturers and suppliers, consumers, and the building process in general is summarized. The impact on construction costs and energy savings varies considerably because of the wide variation in prior insulation practices and climatic conditions in California. The report concludes with a series of recommendations covering all levels of government andmore » the building process. (MCW)« less

NLP-PIER: A Scalable Natural Language Processing, Indexing, and Searching Architecture for Clinical Notes.

PubMed

McEwan, Reed; Melton, Genevieve B; Knoll, Benjamin C; Wang, Yan; Hultman, Gretchen; Dale, Justin L; Meyer, Tim; Pakhomov, Serguei V

2016-01-01

Many design considerations must be addressed in order to provide researchers with full text and semantic search of unstructured healthcare data such as clinical notes and reports. Institutions looking at providing this functionality must also address the big data aspects of their unstructured corpora. Because these systems are complex and demand a non-trivial investment, there is an incentive to make the system capable of servicing future needs as well, further complicating the design. We present architectural best practices as lessons learned in the design and implementation NLP-PIER (Patient Information Extraction for Research), a scalable, extensible, and secure system for processing, indexing, and searching clinical notes at the University of Minnesota.

Otitis Media: Beyond the Examining Room.

PubMed

Welling, Deborah R; Ukstins, Carol A

2018-02-01

The management of hearing loss associated with otitis media is multifaceted. Clinical practice guidelines set the collaborative prescriptive standards for the medical management of otitis media in children. Treatment of this condition does not end with the medical practitioner. There are far-reaching effects of otitis media and its sequelae that permeate every aspect of patients' lives including physiological, educational, and psychosocial. Therefore, a comprehensive interprofessional treatment plan must be designed taking into consideration best practices from a range of professions to maximize clinical outcomes, including the treating physician, speech-language pathologist, clinical audiologist, educational audiologist, and professionals in the educational setting. Copyright © 2017 Elsevier Inc. All rights reserved.

Securing your family's future: the value of estate planning.

PubMed

Rinaldi, Ellen; Shin, Alisa M

2006-08-01

The authors provide an overview of general estate planning considerations, including minimization of federal estate taxes, estate planning techniques to be used to meet specific goals, and guidelines to ensure a well-drafted and well-organized plan. They also stress the importance of planning for incapacity. A well-thought-out and sound estate plan protects assets, minimizes estate taxes, ensures appropriate distribution to designated beneficiaries and prepares family members and business partners. In developing an estate plan, dentists should seek professional advice from a qualified attorney and a certified financial planner. Practice Implications. A sound estate plan should address business continuation or disposition with respect to the dental practice.

Structural Design Considerations for an 8-m Space Telescope

NASA Technical Reports Server (NTRS)

Arnold, William R. Sr.; Stahl, H. Philip

2009-01-01

NASA's upcoming ARES V launch vehicle, with its' immerse payload capacities (both volume and mass) has opened the possibilities for a whole new paradigm of space observatories. It becomes practical to consider a monolith mirror of sufficient size to permit significant scientific advantages, both in collection area and smoothness or figure at a reasonable price. The technologies and engineering to manufacture and test 8 meter class monoliths is mature, with nearly a dozen of such mirrors already in operation around the world. This paper will discuss the design requirements to adapt an 8m meniscus mirror into a Space Telescope System, both launch and operational considerations are included. With objects this massive and structurally sensitive, the mirror design must include all stages of the process. Based upon the experiences of the Hubble Space Telescope, testing and verification at both component and integrated system levels are considered vital to mission success. To this end, two different component level test methods for gravity sag (the so call zero- gravity simulation or test mount) are proposed, with one of these methods suitable for the full up system level testing as well.

Structural design considerations for an 8-m space telescope

NASA Astrophysics Data System (ADS)

Arnold, William r., Sr.; Stahl, H. Philip

2009-08-01

NASA's upcoming ARES V launch vehicle, with its' immense payload capacities (both volume and mass) has opened the possibilities for a whole new paradigm of space observatories. It becomes practical to consider a monolith mirror of sufficient size to permit significant scientific advantages, both in collection area and smoothness or figure at a reasonable price. The technologies and engineering to manufacture and test 8 meter class monoliths is mature, with nearly a dozen of such mirrors already in operation around the world. This paper will discuss the design requirements to adapt an 8m meniscus mirror into a Space Telescope System, both launch and operational considerations are included. With objects this massive and structurally sensitive, the mirror design must include all stages of the process. Based upon the experiences of the Hubble Space Telescope, testing and verification at both component and integrated system levels are considered vital to mission success. To this end, two different component level test methods for gravity sag (the so call zero- gravity simulation or test mount) are proposed, with one of these methods suitable for the full up system level testing as well.

Basic design considerations for free-electron lasers driven by electron beams from RF accelerators

NASA Astrophysics Data System (ADS)

Gover, A.; Freund, H.; Granatstein, V. L.; McAdoo, J. H.; Tang, C.-M.

A design procedure and design criteria are derived for free-electron lasers driven by electron beams from RF accelerators. The procedure and criteria permit an estimate of the oscillation-buildup time and the laser output power of various FEL schemes: with waveguide resonator or open resonator, with initial seed-radiation injection or with spontaneous-emission radiation source, with a linear wiggler or with a helical wiggler. Expressions are derived for computing the various FEL parameters, allowing for the design and optimization of the FEL operational characteristics under ideal conditions or with nonideal design parameters that may be limited by technological or practical constraints. The design procedure enables one to derive engineering curves and scaling laws for the FEL operating parameters. This can be done most conveniently with a computer program based on flowcharts given in the appendices.

Sex and gender-based analysis in pharmacy practice research: A scoping review.

PubMed

McCarthy, Lisa; Milne, Emily; Waite, Nancy; Cooke, Martin; Cook, Katie; Chang, Feng; Sproule, Beth A

2017-11-01

Recognizing the potential effect of sex and gender on health outcomes, there is a shift toward conducting sex and gender-based analysis (SGBA) within health research. However, little is known about the extent to which SGBA has been incorporated into pharmacy practice research. To understand the extent to which SGBA is included in pharmacy practice research. Scoping review of English-language studies identified through MEDLINE, Embase, International Pharmacy Abstracts (IPA), and CINAHL (inception to Jan 2014). Two raters independently screened citations to identify titles and abstracts that included key words related to sex or gender and studies that could be categorized as pharmacy practice research. One author extracted data from included studies related to study design, population, intervention/exposure and outcomes, with results reviewed by another. All authors reviewed eligible articles to categorize them based on a previously-developed typology, and to assess four criteria: 1) the inclusion of sex or gender in research objectives, 2) the depth of sex/gender analysis incorporated into study designs and reporting, 3) the inclusion of sex or gender considerations in interpretation of study results, 4) the intentional and accurate use of sex/gender language. Of 458 unique search results, only six articles met the inclusion criteria. Two of these six publications included sex/gender considerations in a model consistent with sex/gender based analysis as described by Hammarström. Three of the six studies inaccurately applied sex and gender terminology, whereas the two studies that featured sex or gender in their primary research question did use these terms appropriately. Despite increasing attention on the need for considering sex and gender, there was a paucity of pharmacy practice research publications that conducted SGBA. This presents an opportunity to explore sex, gender and intersectionality when pursuing studies that explore the impact of pharmacists interventions on patient outcomes. Copyright © 2016 Elsevier Inc. All rights reserved.

Recommendations for Internet-Based Qualitative Health Research With Hard-to-Reach Populations

PubMed Central

Wilkerson, J. Michael; Iantaffi, Alex; Grey, Jeremy A.; Bockting, Walter O.; Simon Rosser, B. R.

2014-01-01

Researchers new to online qualitative health research frequently have questions about how to transfer knowledge of offline data collection to an online environment. In this article, we present best-practice guidelines derived from the literature and our experience to help researchers determine if an online qualitative study design is appropriate for their research project and, if so, when to begin data collection with a hard-to-reach population. Researchers should reflect on administrative, population, and data collection considerations when deciding between online and offline data collection. Decisions must be made regarding whether to conduct interviews or focus groups, to collect data using asynchronous or synchronous methods, and to use only text or incorporate visual media. Researchers should also reflect on human subjects, recruitment, research instrumentation, additional data collection, and public relations considerations when writing protocols to guide the research team’s response to various situations. Our recommendations direct researchers’ reflection on these considerations. PMID:24623662

Considerations for Infectious Disease Research Studies Using Animals

PubMed Central

Colby, Lesley A; Quenee, Lauriane E; Zitzow, Lois A

2017-01-01

Animal models are vital in understanding the transmission and pathogenesis of infectious organisms and the host immune response to infection. In addition, animal models are essential in vaccine and therapeutic drug development and testing. Prior to selecting an animal model to use when studying an infectious agent, the scientific team must determine that sufficient in vitro and ex vivo data are available to justify performing research in an animal model, that ethical considerations are addressed, and that the data generated from animal work will add useful information to the body of scientific knowledge. Once it is established that an animal should be used, the questions become ‘Which animal model is most suitable?’ and ‘Which experimental design issues should be considered?’ The answers to these questions take into account numerous factors, including scientific, practical, welfare, and regulatory considerations, which are the focus of this article. PMID:28662751

The effects of structure, strategy and market conditions on the operating practices of physician-organization arrangements.

PubMed

Alexander, J A; Vaughn, T E; Burns, L R

2000-11-01

Research to date has documented weak or inconsistent associations between market and organizational factors and the adoption of physician-organization arrangements (POAs) (e.g. physician-hospital organizations, management service organizations and independent practice associations) designed to increase physician integration. We argue that POAs may mask considerable variation in how these entities are operated and governed. Further, because the operating policies and practices of POAs are likely to influence more directly the behaviour of physicians than the structural form of the POA, they may be more sensitive to the market and organizational contingencies that encourage integration. This study attempts to test empirically the relative effects of POA type and market, strategic and organization factors on the operating policies and practices of market-based POAs. Results suggest that type of POA, and market, strategic and organizational factors affect risk sharing, physician selection practices, physician monitoring practices and ways in which monitoring information is used to influence physician behaviour in POAs.

Design control considerations for biologic-device combination products.

PubMed

Anderson, Dave; Liu, Roger; Anand Subramony, J; Cammack, Jon

2017-03-01

Combination products are therapeutic and diagnostic medical products that combine drugs, devices, and/or biological products with one another. Historically, biologics development involved identifying efficacious doses administered to patients intravenously or perhaps by a syringe. Until fairly recently, there has been limited focus on developing an accompanying medical device, such as a prefilled syringe or auto-injector, to enable easy and more efficient delivery. For the last several years, and looking forward, where there may be little to distinguish biologics medicines with relatively similar efficacy profiles, the biotechnology market is beginning to differentiate products by patient-focused, biologic-device based combination products. As innovative as biologic-device combination products are, they can pose considerable development, regulatory, and commercialization challenges due to unique physicochemical properties and special clinical considerations (e.g., dosing volumes, frequency, co-medications, etc.) of the biologic medicine. A biologic-device combination product is a marriage between two partners with "cultural differences," so to speak. There are clear differences in the development, review, and commercialization processes of the biologic and the device. When these two cultures come together in a combination product, developers and reviewers must find ways to address the design controls and risk management processes of both the biologic and device, and knit them into a single entity with supporting product approval documentation. Moreover, digital medicine and connected health trends are pushing the boundaries of combination product development and regulations even further. Despite an admirable cooperation between industry and FDA in recent years, unique product configurations and design features have resulted in review challenges. These challenges have prompted agency reviewers to modernize consultation processes, while at the same time, promoting development of innovative, safe and effective combination products. It remains the manufacturer's responsibility to comply with the relevant requirements and regulations, and develop good business practices that clearly describe how these practices comply with FDA's final rule (21 CFR Part 4) and aligns with the company's already established quality system. Copyright © 2017 Elsevier B.V. All rights reserved.

A practical guide to microfluidic perfusion culture of adherent mammalian cells.

PubMed

Kim, Lily; Toh, Yi-Chin; Voldman, Joel; Yu, Hanry

2007-06-01

Culturing cells at microscales allows control over microenvironmental cues, such as cell-cell and cell-matrix interactions; the potential to scale experiments; the use of small culture volumes; and the ability to integrate with microsystem technologies for on-chip experimentation. Microfluidic perfusion culture in particular allows controlled delivery and removal of soluble biochemical molecules in the extracellular microenvironment, and controlled application of mechanical forces exerted via fluid flow. There are many challenges to designing and operating a robust microfluidic perfusion culture system for routine culture of adherent mammalian cells. The current literature on microfluidic perfusion culture treats microfluidic design, device fabrication, cell culture, and micro-assays independently. Here we systematically present and discuss important design considerations in the context of the entire microfluidic perfusion culture system. These design considerations include the choice of materials, culture configurations, microfluidic network fabrication and micro-assays. We also present technical issues such as sterilization; seeding cells in both 2D and 3D configurations; and operating the system under optimized mass transport and shear stress conditions, free of air-bubbles. The integrative and systematic treatment of the microfluidic system design and fabrication, cell culture, and micro-assays provides novices with an effective starting point to build and operate a robust microfludic perfusion culture system for various applications.

Status of Net Metering: Assessing the Potential to Reach Program Caps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heeter, J.; Gelman, R.; Bird, L.

2014-09-01

Several states are addressing the issue of net metering program caps, which limit the total amount of net metered generating capacity that can be installed in a state or utility service territory. In this analysis, we examine net metering caps to gain perspective on how long net metering will be available in various jurisdictions under current policies. We also surveyed state practices and experience to understand important policy design considerations.

An evaluation of the nursing practice environment and successful change management using the new generation Magnet Model.

PubMed

Grant, Bettyanne; Colello, Sandra; Riehle, Martha; Dende, Denise

2010-04-01

To discuss the new Magnet Model as it relates to the successful implementation of a practice change. There is growing international interest in the Magnet Recognition Programme. The latest generation of the Magnet Model has been designed not only as a road map for organizations seeking to achieve Magnet recognition but also as a framework for nursing practice and research in the future. The Magnet Model was used to identify success factors related to a practice change and to evaluate the nursing practice environment. Even when proposed changes to practice are evidence based and thoughtfully considered, the nurses' work environment must be supportive and empowering in order to yield successful and sustainable implementation of new practice. Success factors for implementation of a practice change can be illuminated by aligning environmental characteristics to the components of the new Magnet Model. The Magnet Model provides an exceptional framework for building an agile and dynamic work force. Thoughtful consideration of the components and inter-relationships represented in the new model can help to both predict and ensure organizational vitality.

Magnetic shielding structure optimization design for wireless power transmission coil

NASA Astrophysics Data System (ADS)

Dai, Zhongyu; Wang, Junhua; Long, Mengjiao; Huang, Hong; Sun, Mingui

2017-09-01

In order to improve the performance of the wireless power transmission (WPT) system, a novel design scheme with magnetic shielding structure on the WPT coil is presented in this paper. This new type of shielding structure has great advantages on magnetic flux leakage reduction and magnetic field concentration. On the basis of theoretical calculation of coil magnetic flux linkage and characteristic analysis as well as practical application feasibility consideration, a complete magnetic shielding structure was designed and the whole design procedure was represented in detail. The simulation results show that the coil with the designed shielding structure has the maximum energy transmission efficiency. Compared with the traditional shielding structure, the weight of the new design is significantly decreased by about 41%. Finally, according to the designed shielding structure, the corresponding experiment platform is built to verify the correctness and superiority of the proposed scheme.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

ALARA radiation considerations for the AP600 reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lau, F.L.

1995-03-01

The radiation design of the AP600 reactor plant is based on an average annual occupational radiation exposure (ORE) of 100 man-rem. As a design goal we have established a lower value of 70 man-rem per year. And, with our current design process, we expect to achieve annual exposures which are well below this goal. To accomplish our goal we have established a process that provides criteria, guidelines and customer involvement to achieve the desired result. The criteria and guidelines provide the shield designer, as well as the systems and plant layout designers with information that will lead to an integratedmore » plant design that minimizes personnel exposure and yet is not burdened with complicated shielding or unnecessary component access limitations. Customer involvement is provided in the form of utility input, design reviews and information exchange. Cooperative programs with utilities in the development of specific systems or processes also provides for an ALARA design. The results are features which include ALARA radiation considerations as an integral part of the plant design and a lower plant ORE. It is anticipated that a further reduction in plant personnel exposures will result through good radiological practices by the plant operators. The information in place to support and direct the plant designers includes the Utility Requirements Document (URD), Federal Regulations, ALARA guidelines, radiation design information and radiation and shielding design criteria. This information, along with the utility input, design reviews and information feedback, will contribute to the reduction of plant radiation exposure levels such that they will be less than the stated goals.« less

Classifying Residents who use Landscape Irrigation: Implications for Encouraging Water Conservation Behavior

NASA Astrophysics Data System (ADS)

Warner, Laura A.; Lamm, Alexa J.; Rumble, Joy N.; Martin, Emmett T.; Cantrell, Randall

2016-08-01

Large amounts of water applied as urban irrigation can often be reduced substantially without compromising esthetics. Thus, encouraging the adoption of water-saving technologies and practices is critical to preserving water resources, yet difficult to achieve. The research problem addressed in this study is the lack of characterization of residents who use urban irrigation, which hinders the design of effective behavior change programs. This study examined audience segmentation as an approach to encouraging change using current residential landscape practices. K-means cluster analysis identified three meaningful subgroups among residential landscape irrigation users ( N = 1,063): the water considerate majority ( n = 479, 45 %), water savvy conservationists ( n = 378, 36 %), and unconcerned water users ( n = 201, 19 %). An important finding was that normative beliefs, attitudes, and perceived behavioral control characteristics of the subgroups were significantly different with large and medium practical effect sizes. Future water conservation behaviors and perceived importance of water resources were also significantly different among subgroups. The water considerate majority demonstrated capacity to conserve, placed high value on water, and were likely to engage in behavior changes. This article contributes to the literature on individuals who use residential landscape irrigation, an important target audience with potential to conserve water through sustainable irrigation practices and technologies. Findings confirm applicability of the capacity to conserve water to audience segmentation and extend this concept by incorporating perceived value of water resources and likelihood of conservation. The results suggest practical application to promoting residential landscape water conservation behaviors based on important audience characteristics.

Maternal–Child Microbiome: Specimen Collection, Storage and Implications for Research and Practice

PubMed Central

Jordan, Sheila; Baker, Brenda; Dunn, Alexis; Edwards, Sara; Ferranti, Erin; Mutic, Abby D.; Yang, Irene; Rodriguez, Jeannie

2017-01-01

Background The maternal microbiome is a key contributor to the development and outcomes of pregnancy and the health status of both mother and infant. Significant advances are occurring in the science of the maternal and child microbiome and hold promise in improving outcomes related to pregnancy complications, child development, and chronic health conditions of mother and child. Objectives The purpose of the paper is to review site-specific considerations in the collection and storage of maternal and child microbiome samples and its implications for nursing research and practice. Approach Microbiome sampling protocols were reviewed and synthesized. Precautions across sampling protocols were also noted. Results Oral, vaginal, gut, placental, and breastmilk are viable sources for sampling the maternal and/or child microbiome. Prior to sampling special considerations need to be addressed related to various factors including current medications, health status, and hygiene practices. Proper storage of samples will avoid degradation of cellular and DNA structures vital for analysis. Discussion Changes in the microbiome throughout the perinatal, postpartum and childhood periods are dramatic and significant to outcomes of the pregnancy and the long-term health of mother and child. Proper sampling techniques are required to produce reliable results from which evidence-based practice recommendations will be built. Ethical and practical issues surrounding study design and protocol development must also be considered when researching vulnerable groups such as pregnant women and infants. Nurses hold the responsibility to both perform the research and to translate findings from microbiome investigations for clinical use. PMID:28252577

A Flexible framework for forward and inverse modeling of stormwater control measures

NASA Astrophysics Data System (ADS)

Aflaki, S.; Massoudieh, A.

2016-12-01

Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. While popular, generally, the GI models are relatively simplistic. However, GI model predictions are being relied upon by many municipalities and State/Local agencies to make decisions about grey vs. green infrastructure improvement planning. Adding complexity to GI modeling frameworks may preclude their use in simpler urban planning situations. Therefore, the goal here was to develop a sophisticated, yet flexible tool that could be used by design engineers and researchers to capture and explore the effect of design factors and properties of the media used in the performance of GI systems at a relatively small scale. We deemed it essential to have a flexible GI modeling tool that is capable of simulating GI system components and specific biophysical processes affecting contaminants such as reactions, and particle-associated transport accurately while maintaining a high degree of flexibly to account for the myriad of GI alternatives. The mathematical framework for a stand-alone GI performance assessment tool has been developed and will be demonstrated. The process-based model framework developed here can be used to model a diverse range of GI practices such as green roof, retention pond, bioretention, infiltration trench, permeable pavement and other custom-designed combinatory systems. Four demonstration applications covering a diverse range of systems will be presented. The example applications include a evaluating hydraulic performance of a complex bioretention system, hydraulic analysis of porous pavement system, flow colloid-facilitated transport, reactive transport and groundwater recharge underneath an infiltration pond and finally reactive transport and bed-sediment interactions in a wetland system will be presented.

[Diagnossis and treatment of complicated anterior teeth esthetic defects by combination of whole-process digital esthetic rehabilitation with periodontic surgery].

PubMed

Li, Z; Liu, Y S; Ye, H Q; Liu, Y S; Hu, W J; Zhou, Y S

2017-02-18

To explore a new method of whole-process digital esthetic prosthodontic rehabilitation combined with periodontic surgery for complicated anterior teeth esthetic defects accompanied by soft tissue morphology, to provide an alternative choice for solving this problem under the guidance of three-dimensional (3D) printing digital dental model and surgical guide, thus completing periodontic surgery and digital esthetic rehabilitation of anterior teeth. In this study, 12 patients with complicated esthetic problems accompanied by soft tissue morphology in their anterior teeth were included. The dentition and facial images were obtained by intra-oral scanning and three-dimensional (3D) facial scanning and then calibrated. Two esthetic designs and prosthodontic outcome predictions were created by computer aided design /computer aided manufacturing (CAD/CAM) software combined with digital photography, including consideration of white esthetics and comprehensive consideration of pink-white esthetics. The predictive design of prostheses and the facial appearances of the two designs were evaluated by the patients. If the patients chose the design of comprehensive consideration of pink-white esthetics, they would choose whether they would receive periodontic surgery before esthetic rehabilitation. The dentition design cast of those who chose periodontic surgery would be 3D printed for the guide of periodontic surgery accordingly. In light of the two digital designs based on intra-oral scanning, facing scanning and digital photography, the satisfaction rate of the patients was significantly higher for the comprehensive consideration of pink-white esthetic design (P<0.05) and more patients tended to choose priodontic surgery before esthetic rehabilitation. The 3D printed digital dental model and surgical guide provided significant instructions for periodontic surgery, and achieved success transfer from digital design to clinical application. The prostheses were fabricated by CAD/CAM, thus realizing the whole-process digital esthetic rehabilitation. The new method for esthetic rehabilitation of complicated anterior teeth esthetic defects accompanied by soft tissue morphology, including patient-involved digital esthetic analysis, design, esthetic outcome prediction, 3D printing surgical guide for periodontic surgery and digital fabrication is a practical technology. This method is useful for improvement of clinical communication efficiency between doctor-patient, doctor-technician and doctors from different departments, and is conducive to multidisciplinary treatment of this complicated anterior teeth esthetic problem.

Web-based learning resources - new opportunities for competency development.

PubMed

Moen, Anne; Nygård, Kathrine A; Gauperaa, Torunn

2009-01-01

Creating web-based learning environments holds great promise for on the job training and competence development in nursing. The web-based learning environment was designed and customized by four professional development nurses. We interviewed five RNs that pilot tested the web-based resource. Our findings give some insight into how the web-based design tool are perceived and utilized, and how content is represented in the learning environment. From a competency development perspective, practicing authentic tasks in a web-based learning environment can be useful to train skills and keep up important routines. The approach found in this study also needs careful consideration. Emphasizing routines and skills can be important to reduce variation and ensure more streamlined practice from an institution-wide quality improvement efforts. How the emphasis on routines and skills plays out towards the individual's overall professional development needs further careful studies.

Design, analysis, operation, and advanced control of hybrid renewable energy systems

NASA Astrophysics Data System (ADS)

Whiteman, Zachary S.

Because using non-renewable energy systems (e.g., coal-powered co-generation power plants) to generate electricity is an unsustainable, environmentally hazardous practice, it is important to develop cost-effective and reliable renewable energy systems, such as photovoltaics (PVs), wind turbines (WTs), and fuel cells (FCs). Non-renewable energy systems, however, are currently less expensive than individual renewable energy systems (IRESs). Furthermore, IRESs based on intermittent natural resources (e.g., solar irradiance and wind) are incapable of meeting continuous energy demands. Such shortcomings can be mitigated by judiciously combining two or more complementary IRESs to form a hybrid renewable energy system (HRES). Although previous research efforts focused on the design, operation, and control of HRESs has proven useful, no prior HRES research endeavor has taken a systematic and comprehensive approach towards establishing guidelines by which HRESs should be designed, operated, and controlled. The overall goal of this dissertation, therefore, is to establish the principles governing the design, operation, and control of HRESs resulting in cost-effective and reliable energy solutions for stationary and mobile applications. To achieve this goal, we developed and demonstrated four separate HRES principles. Rational selection of HRES type: HRES components and their sizes should be rationally selected using knowledge of component costs, availability of renewable energy resources, and expected power demands of the application. HRES design: by default, the components of a HRES should be arranged in parallel for increased efficiency and reliability. However, a series HRES design may be preferred depending on the operational considerations of the HRES components. HRES control strategy selection: the choice of HRES control strategy depends on the dynamics of HRES components, their operational considerations, and the practical limitations of the HRES end-use. HRES data-driven control: information-rich data should be used to assist in the intelligent coordination of HRES components in meeting its operating objectives when additional computation can be afforded and significant benefits can be realized.

Assessment of children's capacity to consent for research: a descriptive qualitative study of researchers' practices.

PubMed

Gibson, Barbara E; Stasiulis, Elaine; Gutfreund, Shawna; McDonald, Maria; Dade, Lauren

2011-08-01

In Canadian jurisdictions without specific legislation pertaining to research consent, the onus is placed on researchers to determine whether a child is capable of independently consenting to participate in a research study. Little, however, is known about how child health researchers are approaching consent and capacity assessment in practice. The aim of this study was to explore and describe researchers' current practices. The study used a qualitative descriptive design consisting of 14 face-to-face interviews with child health researchers and research assistants in Southern Ontario. Transcribed interviews were analysed for common themes. Procedures for assessing capacity varied considerably from the use of age cutoffs to in-depth engagement with each child. Three key issues emerged from the accounts: (1) requirements that consent be provided by a single person thwarted researchers' abilities to support family decision-making; (2) little practical distinction was made between assessing if a child was capable, versus determining if study information had been adequately explained by the researcher; and (3) participants' perceived that review boards' requirements may conflict with what they considered ethical consent practices. The results suggest that researchers' consent and capacity knowledge and skills vary considerably. Perceived discrepancies between ethical practice and ethics boards' requirements suggest the need for dialogue, education and possibly ethics board reforms. Furthermore we propose, where appropriate, a 'family decision-making' model that allows parents and their children to consent together, thereby shifting the focus from separate assent and consent procedures to approaches that appropriately engage the child and family.

Why do we pay? A national survey of investigators and IRB chairpersons

PubMed Central

Ripley, Elizabeth; Macrina, Francis; Markowitz, Monika; Gennings, Chris

2011-01-01

The principle that payment to participants should not be undue or coercive is the consensus of international and national guidelines and ethical debates; however, what this means in practice is unclear. This study determined the attitudes and practices of IRB chairpersons and investigators regarding participant payment. One thousand six hundred investigators and 1900 IRB chairpersons received an invitation to participate in a web-based survey. Four hundred and fifty-five investigators (28.3%) and 395 IRB chairpersons (18.6%) responded. The survey was designed to gather considerations that govern payment determination and practical application of these considerations in hypothetical case studies. The survey asked best answer, multiple choice, and open text questions. Short hypothetical case scenarios where presented, and participants were asked to rate factors in the study that might impact payment and then determine their recommended payment. A predictive model was developed for each case to determine factors which affected payment. Although compensation was the primary reason given to justify payment by both investigators and IRB chairpersons, the cases suggested that, in practice, payment is often guided by incentive, as shown by the impact of anticipated difficulty recruiting, inconvenience, and risk in determining payment. Payment models varied by type of study. Ranges for recommended payments by both groups for different types of procedures and studies are presented. PMID:20831420

Practical Considerations Informing Teachers' Technology Integration Decisions: The Case of Tablet PCs

ERIC Educational Resources Information Center

Pareja Roblin, Natalie; Tondeur, Jo; Voogt, Joke; Bruggeman, Bram; Mathieu, Griet; van Braak, Johan

2018-01-01

The unique characteristics of tablet PCs promise important benefits for education. Yet, little is known about the rationale underlying teachers' decisions concerning their educational uses within the constraints of daily classroom practice. The current multiple case study investigated the practical considerations informing nine secondary school…

Simulated potential for enhanced performance of mechanically stacked hybrid III–V/Si tandem photovoltaic modules using DC–DC converters

DOE PAGES

MacAlpine, Sara; Bobela, David C.; Kurtz, Sarah; ...

2017-10-01

This work examines a tandem module design with GaInP2 mechanically stacked on top of crystalline Si, using a detailed photovoltaic (PV) system model to simulate four-terminal (4T) unconstrained and two-terminal voltage-matched (2T VM) parallel architectures. Module-level power electronics is proposed for the 2T VM module design to enhance its performance over the breadth of temperatures experienced by a typical PV installation. Annual, hourly simulations of various scenarios indicate that this design can reduce annual energy losses to ~0.5% relative to the 4T module configuration. Consideration is given to both performance and practical design for building or ground mount installations, emphasizingmore » compatibility with existing standard Si modules.« less

Simulated potential for enhanced performance of mechanically stacked hybrid III–V/Si tandem photovoltaic modules using DC–DC converters

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacAlpine, Sara; Bobela, David C.; Kurtz, Sarah

This work examines a tandem module design with GaInP2 mechanically stacked on top of crystalline Si, using a detailed photovoltaic (PV) system model to simulate four-terminal (4T) unconstrained and two-terminal voltage-matched (2T VM) parallel architectures. Module-level power electronics is proposed for the 2T VM module design to enhance its performance over the breadth of temperatures experienced by a typical PV installation. Annual, hourly simulations of various scenarios indicate that this design can reduce annual energy losses to ~0.5% relative to the 4T module configuration. Consideration is given to both performance and practical design for building or ground mount installations, emphasizingmore » compatibility with existing standard Si modules.« less

Simulated potential for enhanced performance of mechanically stacked hybrid III-V/Si tandem photovoltaic modules using DC-DC converters

NASA Astrophysics Data System (ADS)

MacAlpine, Sara; Bobela, David C.; Kurtz, Sarah; Lumb, Matthew P.; Schmieder, Kenneth J.; Moore, James E.; Walters, Robert J.; Alberi, Kirstin

2017-10-01

This work examines a tandem module design with GaInP2 mechanically stacked on top of crystalline Si, using a detailed photovoltaic (PV) system model to simulate four-terminal (4T) unconstrained and two-terminal voltage-matched (2T VM) parallel architectures. Module-level power electronics is proposed for the 2T VM module design to enhance its performance over the breadth of temperatures experienced by a typical PV installation. Annual, hourly simulations of various scenarios indicate that this design can reduce annual energy losses to ˜0.5% relative to the 4T module configuration. Consideration is given to both performance and practical design for building or ground mount installations, emphasizing compatibility with existing standard Si modules.

Design Life Level: Quantifying risk in a changing climate

NASA Astrophysics Data System (ADS)

Rootzén, Holger; Katz, Richard W.

2013-09-01

In the past, the concepts of return levels and return periods have been standard and important tools for engineering design. However, these concepts are based on the assumption of a stationary climate and do not apply to a changing climate, whether local or global. In this paper, we propose a refined concept, Design Life Level, which quantifies risk in a nonstationary climate and can serve as the basis for communication. In current practice, typical hydrologic risk management focuses on a standard (e.g., in terms of a high quantile corresponding to the specified probability of failure for a single year). Nevertheless, the basic information needed for engineering design should consist of (i) the design life period (e.g., the next 50 years, say 2015-2064); and (ii) the probability (e.g., 5% chance) of a hazardous event (typically, in the form of the hydrologic variable exceeding a high level) occurring during the design life period. Capturing both of these design characteristics, the Design Life Level is defined as an upper quantile (e.g., 5%) of the distribution of the maximum value of the hydrologic variable (e.g., water level) over the design life period. We relate this concept and variants of it to existing literature and illustrate how they, and some useful complementary plots, may be computed and used. One practically important consideration concerns quantifying the statistical uncertainty in estimating a high quantile under nonstationarity.

Design of control-group conditions in clinical trials of behavioral interventions.

PubMed

Lindquist, Ruth; Wyman, Jean F; Talley, Kristine M C; Findorff, Mary J; Gross, Cynthia R

2007-01-01

To review considerations in the design of placebo (attention) control conditions for community-based clinical trials of health behavior change interventions and to provide practical strategies for the design of control conditions. A well-designed control condition is an essential component of a clinical trial to foster the unambiguous interpretation of study findings. Pitfalls in the design of control conditions in clinical trials of behavioral interventions are identified and strategies to address them are offered. Types of control conditions that have been used in fall prevention trials are described, along with their strengths and weaknesses. The control condition used in the recent fall evaluation and prevention program (FEPP) was designed to overcome limitations of previous trial designs; it is provided to illustrate how to apply specific design principles. Pitfalls in the design of behavioral intervention studies may be avoided with the application of sound design principles. The FEPP active control condition can be used as a model in the design of future studies.

Pocket-Size Interferometric Systems

NASA Astrophysics Data System (ADS)

Waters, James P.; Fernald, Mark R.

1990-04-01

Optical sensors have the intrinsic advantages over electronic sensors of complete safety in hazardous areas and absolute immunity from both transmitting or picking up electromagnetic radiation. However, adoption of optical sensors in real-world applications requires a sensor design which has a sensitivity, resolution, and dynamic range comparable to an equivalent electronic sensor and at the same time must fulfill the practical considerations of small size and low cost. While sensitivity, resolution and dynamic range can be easily achieved with optical heterodyne sensors, the practical considerations make their near-term adoption unlikely. Significant improvements to optical heterodyne vibration and velocity sensors (flexibility, reliability and environmental immunity) have been realized with the use of semiconductor lasers, optical fibers and fiber-optic components. In fact, all of the discrete optical components in a heterodyne interferometer have been replaced with much smaller and more rugged devices except for the optical frequency shifter, acousto-optic modulator (AOM). The AOM and associated power supply, however, account for a substantial portion of both the size and cost. Previous work has shown that an integrated-optic, serrodyne phase modulator with an inexpensive drive circuit can be used for single sideband heterodyne detection. This paper describes the next step, design and implementation of a heterodyne interferometer using integrated-Optic technology to provide the polarization maintaining couplers and phase modulator. The couplers were made using a proton exchange process which produced devices with an extinction ratio of better than 40 dB. The serrodyne phase modulator had the advantage over an AOM of being considerably smaller and having a drive power of less than a milliwatt. The results of this work show that this technology is an effective way of reducing the size of the system and the cost of multiple units without sacarifying performance.

Challenges and opportunities in bioanalytical support for gene therapy medicinal product development.

PubMed

Ma, Mark; Balasubramanian, Nanda; Dodge, Robert; Zhang, Yan

2017-09-01

Gene and nucleic acid therapies have demonstrated patient benefits to address unmet medical needs. Beside considerations regarding the biological nature of the gene therapy, the quality of bioanalytical methods plays an important role in ensuring the success of these novel therapies. Inconsistent approaches among bioanalytical labs during preclinical and clinical phases have been observed. There are many underlying reasons for this inconsistency. Various platforms and reagents used in quantitative methods, lacking of detailed regulatory guidance on method validation and uncertainty of immunogenicity strategy in supporting gene therapy may all be influential. This review summarizes recent practices and considerations in bioanalytical support of pharmacokinetics/pharmacodynamics and immunogenicity evaluations in gene therapy development with insight into method design, development and validations.

Implementation of psychological clinical trials in epilepsy: Review and guide.

PubMed

Modi, Avani C; Wagner, Janelle; Smith, Aimee W; Kellermann, Tanja S; Michaelis, Rosa

2017-09-01

The International League Against Epilepsy (ILAE) Neuropsychiatry commission and United States Institute of Medicine report both identified cognitive and psychological comorbidities as a significant issue for individuals with epilepsy, with rates as high as 60%. However, there is a paucity of evidence-based treatments for many psychological conditions (e.g., learning disorders, cognitive disorders, behavioral disorders). Because of inherent challenges in the implementation of psychological therapy trials and specific considerations for the population with epilepsy, the focus of the current review was to provide guidance and recommendations to conduct psychological trials for individuals with epilepsy. Several key areas will be discussed, including selection of patients, trial design, psychological intervention considerations, outcomes and evaluation of results, publication of trial results, and special issues related to pediatric clinical trials. Rigorously designed psychological therapy trials will set the stage for evidence-based practice in the care of individuals with epilepsy, with the goal of improving seizures, side effects, and HRQOL. Copyright © 2017 Elsevier Inc. All rights reserved.

High-speed architecture for the decoding of trellis-coded modulation

NASA Technical Reports Server (NTRS)

Osborne, William P.

1992-01-01

Since 1971, when the Viterbi Algorithm was introduced as the optimal method of decoding convolutional codes, improvements in circuit technology, especially VLSI, have steadily increased its speed and practicality. Trellis-Coded Modulation (TCM) combines convolutional coding with higher level modulation (non-binary source alphabet) to provide forward error correction and spectral efficiency. For binary codes, the current stare-of-the-art is a 64-state Viterbi decoder on a single CMOS chip, operating at a data rate of 25 Mbps. Recently, there has been an interest in increasing the speed of the Viterbi Algorithm by improving the decoder architecture, or by reducing the algorithm itself. Designs employing new architectural techniques are now in existence, however these techniques are currently applied to simpler binary codes, not to TCM. The purpose of this report is to discuss TCM architectural considerations in general, and to present the design, at the logic gate level, or a specific TCM decoder which applies these considerations to achieve high-speed decoding.

Sustainable supply chain design: a configurational approach.

PubMed

Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

Sustainable Supply Chain Design: A Configurational Approach

PubMed Central

Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

Provider Agency Practices as a Source of Social Work EBP.

PubMed

Blakely, Thomas J; Dziadosz, Gregory M

2016-01-01

Through this article the authors propose that agency service provider systems may be a source of evidence-based practices (EBP). One agency's design and implementation of a program entitled Community Treatment and Rehabilitation is presented as an example. The elements of this program conform to the creation of EBPs. It was formulated with consideration of clients' values and judgments through their participation at every step in the assessment and treatment process. Staff clinicians were trained in established EBP interventions, such as cognitive therapy, embedded in a system of ordered assessment, treatment, and outcome evaluation. A controlled research design was used to gather outcome data to inform clinicians' decisions about interventions that were then systematically applied with clients. The delivery system was organized for clinical supervisors to guide staff clinical practices so that all were operating on the same set of guidelines allowing for similar outcomes to occur with similar interventions. This method of developing EBPs makes them available for application immediately and successfully eliminates the delay between development and implementation that usually occurs with other sources of EBPs.

Building qualitative study design using nursing's disciplinary epistemology.

PubMed

Thorne, Sally; Stephens, Jennifer; Truant, Tracy

2016-02-01

To discuss the implications of drawing on core nursing knowledge as theoretical scaffolding for qualitative nursing enquiry. Although nurse scholars have been using qualitative methods for decades, much of their methodological direction derives from conventional approaches developed for answering questions in the social sciences. The quality of available knowledge to inform practice can be enhanced through the selection of study design options informed by an appreciation for the nature of nursing knowledge. Discussion paper. Drawing on the body of extant literature dealing with nursing's theoretical and qualitative research traditions, we consider contextual factors that have shaped the application of qualitative research approaches in nursing, including prior attempts to align method with the structure and form of disciplinary knowledge. On this basis, we critically reflect on design considerations that would follow logically from core features associated with a nursing epistemology. The substantive knowledge used by nurses to inform their practice includes both aspects developed at the level of the general and also that which pertains to application in the unique context of the particular. It must be contextually relevant to a fluid and dynamic healthcare environment and adaptable to distinctive patient conditions. Finally, it must align with nursing's moral mandate and action imperative. Qualitative research design components informed by nursing's disciplinary epistemology will help ensure a logical line of reasoning in our enquiries that remains true to the nature and structure of practice knowledge. © 2015 John Wiley & Sons Ltd.

Mixed methods research: a design for emergency care research?

PubMed

Cooper, Simon; Porter, Jo; Endacott, Ruth

2011-08-01

This paper follows previous publications on generic qualitative approaches, qualitative designs and action research in emergency care by this group of authors. Contemporary views on mixed methods approaches are considered, with a particular focus on the design choice and the amalgamation of qualitative and quantitative data emphasising the timing of data collection for each approach, their relative 'weight' and how they will be mixed. Mixed methods studies in emergency care are reviewed before the variety of methodological approaches and best practice considerations are presented. The use of mixed methods in clinical studies is increasing, aiming to answer questions such as 'how many' and 'why' in the same study, and as such are an important and useful approach to many key questions in emergency care.

Practical issues and lessons learned from multi-regional clinical trials via case examples: a Japanese perspective.

PubMed

Ando, Yuki; Hamasaki, Toshimitsu

2010-01-01

The multi-regional clinical trials (MRCTs) being administered in different regions of the world now play a major role in providing evidence for the efficacy and safety of new drugs amidst the simultaneous global development and worldwide registration of such drugs, in support of the expeditious availability of medical products to patients. However, such trials present considerable challenges as far as quality, design, implementation, analysis, and interpretation are concerned. In this article, we share our observations and lessons learned from the design, implementation, analysis, and interpretation of some MRCTs with case examples. Current Japanese regulatory guidance on MRCTs is introduced along with some suggestions for design, implementation, and interpretation. Copyright © 2010 John Wiley & Sons, Ltd.

Vehicle design considerations for active control application to subsonic transport aircraft

NASA Technical Reports Server (NTRS)

Hofmann, L. G.; Clement, W. F.

1974-01-01

The state of the art in active control technology is summarized. How current design criteria and airworthiness regulations might restrict application of this emerging technology to subsonic CTOL transports of the 1980's are discussed. Facets of active control technology considered are: (1) augmentation of relaxed inherent stability; (2) center-of-gravity control; (3) ride quality control; (4) load control; (5) flutter control; (6) envelope limiting, and (7) pilot interface with the control system. A summary and appraisal of the current state of the art, design criteria, and recommended practices, as well as a projection of the risk in applying each of these facets of active control technology is given. A summary of pertinent literature and technical expansions is included.

NLP-PIER: A Scalable Natural Language Processing, Indexing, and Searching Architecture for Clinical Notes

PubMed Central

McEwan, Reed; Melton, Genevieve B.; Knoll, Benjamin C.; Wang, Yan; Hultman, Gretchen; Dale, Justin L.; Meyer, Tim; Pakhomov, Serguei V.

2016-01-01

Many design considerations must be addressed in order to provide researchers with full text and semantic search of unstructured healthcare data such as clinical notes and reports. Institutions looking at providing this functionality must also address the big data aspects of their unstructured corpora. Because these systems are complex and demand a non-trivial investment, there is an incentive to make the system capable of servicing future needs as well, further complicating the design. We present architectural best practices as lessons learned in the design and implementation NLP-PIER (Patient Information Extraction for Research), a scalable, extensible, and secure system for processing, indexing, and searching clinical notes at the University of Minnesota. PMID:27570663

Some consideration for evaluation of structural integrity of aging aircraft

NASA Astrophysics Data System (ADS)

Terada, Hiroyuki; Asada, Hiroo

The objective of this paper is to examine the achievement and the limitation of state-of-the-art of the methodology of damage tolerant design and the subjects to be solved for further improvement. The topics discussed are: the basic concept of full-scale fatigue testing, fracture mechanics applications, repair of detected damages, inspection technology, and determination of inspection intervals, reliability assessment for practical application, and the importance of various kinds of data acquisition.

Practical Considerations of Design, Fabrication and Tests for Composite Materials,

DTIC Science & Technology

1982-09-01

ORGANIZATION ADVISORY GROUP FOR AEROSPACE RESEARCH AND DEVELOPMENT (ORGANISATION DU TRAITE DE L’ATLANTIQUE NORD) .1 AGARD Lecture Series No. 124...of Materials Science University of Bath Claverton Down Bath AB2 7AY UK SPEAKERS Dr A.R. Bunsell Dr J.J.Gerharz Ecole Naioiiale Sup~rieure des Fra...unhofer Institfit fuer Mines de Paris Betriebsfestigkeit (IBF) Centre des Mat~riaux Darmstadt Route Nationale 7, B.P. 87 Germany 91003 Evry Cedex France

Digital communications: Microwave applications

NASA Astrophysics Data System (ADS)

Feher, K.

Transmission concepts and techniques of digital systems are presented; and practical state-of-the-art implementation of digital communications systems by line-of-sight microwaves is described. Particular consideration is given to statistical methods in digital transmission systems analysis, digital modulation methods, microwave amplifiers, system gain, m-ary and QAM microwave systems, correlative techniques and applications to digital radio systems, hybrid systems, digital microwave systems design, diversity and protection switching techniques, measurement techniques, and research and development trends and unsolved problems.

Applications and limitations of radiomics

NASA Astrophysics Data System (ADS)

Yip, Stephen S. F.; Aerts, Hugo J. W. L.

2016-07-01

Radiomics is an emerging field in quantitative imaging that uses advanced imaging features to objectively and quantitatively describe tumour phenotypes. Radiomic features have recently drawn considerable interest due to its potential predictive power for treatment outcomes and cancer genetics, which may have important applications in personalized medicine. In this technical review, we describe applications and challenges of the radiomic field. We will review radiomic application areas and technical issues, as well as proper practices for the designs of radiomic studies.

Airborne oceanographic lidar system

NASA Technical Reports Server (NTRS)

1975-01-01

Specifications and preliminary design of an Airborne Oceanographic Lidar (AOL) system, which is to be constructed for installation and used on a NASA Wallops Flight Center (WFC) C-54 research aircraft, are reported. The AOL system is to provide an airborne facility for use by various government agencies to demonstrate the utility and practicality of hardware of this type in the wide area collection of oceanographic data on an operational basis. System measurement and performance requirements are presented, followed by a description of the conceptual system approach and the considerations attendant to its development. System performance calculations are addressed, and the system specifications and preliminary design are presented and discussed.

Fast Track to the Cloud: Design Patterns for 12-Factor Earth Sciences Applications

NASA Technical Reports Server (NTRS)

Pawloski, Andrew; McLaughlin, Brett; Lynnes, Christopher

2016-01-01

As expanding service offerings and decreasing prices make the cloud increasingly attractive to Earth Science applications, there are nontrivial practical considerations which can hinder its meaningful use. In this talk, we will discuss architectural recommendations and lessons learned while working on EOSDIS' cloud efforts, particularly the NASA-compliant General Application Platform (NGAP) and its associated applications. Prominent in our findings is the importance of 12-factor design patterns and the powerful "wins" they enable in the cloud. We will share our strategies for "fast-tracking" applications to the cloud --whether they be legacy, planned for the future, or somewhere in between.

Co-Designing Mobile Apps to Assist in Clinical Nursing Education: A Study Protocol.

PubMed

O'Connor, Siobhan; Andrews, Tom

2016-01-01

Mobile applications (apps) to train health professionals is gaining momentum as the benefits of mobile learning (mLearning) are becoming apparent in complex clinical environments. However, most educational apps are generic, off-the-shelf pieces of software that do not take into consideration the unique needs of nursing students. The proposed study will apply a user-centred design process to create a tailored mobile app for nursing students to learn and apply clinical skills in practice. The app will be piloted and evaluated to understand how nursing students use mobile technology in clinical settings to support their learning and educational needs.

A Roadmap for Educational Research in Pharmacy

PubMed Central

Dean, Meredith J.; Mumper, Russell J.; Blouin, Robert A.; Roth, Mary T.

2013-01-01

Educational research must play a critical role in informing practice and policy within pharmacy education. Understanding the educational environment and its impact on students, faculty members, and other stakeholders is imperative for improving outcomes and preparing pharmacy students to meet the needs of 21st century health care. To aid in the design and implementation of meaningful educational research within colleges and schools of pharmacy, this roadmap addresses philosophy and educational language; guidelines for the conduct of educational research; research design, including 4 approaches to defining, collecting, and analyzing educational data; measurement issues; ethical considerations; resources and tools; and the value of educational research in guiding curricular transformation. PMID:24371342

Asking good clinical research questions and choosing the right study design.

PubMed

Bragge, P

2010-07-01

Clinicians and researchers seek answers to clinical research questions, primarily by accessing the results of clinical research studies. This paper moves the focus of research enquiry from getting answers to developing good clinical research questions. Using worked examples, the steps involved in refining questions drawn from various sources to create 'answerable' clinical research questions using the 'PICO' principle are described. Issues to consider in prioritising clinical research questions are also identified. Theoretical and practical considerations involved in choosing the right study design for a clinical research question are then discussed using the worked examples. These include: Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Piezoelectric line moment actuator for active radiation control from light-weight structures

NASA Astrophysics Data System (ADS)

Jandak, Vojtech; Svec, Petr; Jiricek, Ondrej; Brothanek, Marek

2017-11-01

This article outlines the design of a piezoelectric line moment actuator used for active structural acoustic control. Actuators produce a dynamic bending moment that appears in the controlled structure resulting from the inertial forces when the attached piezoelectric stripe actuators start to oscillate. The article provides a detailed theoretical analysis necessary for the practical realization of these actuators, including considerations concerning their placement, a crucial factor in the overall system performance. Approximate formulas describing the dependency of the moment amplitude on the frequency and the required electric voltage are derived. Recommendations applicable for the system's design based on both theoretical and empirical results are provided.

Peer volunteer perspectives following a complex social cognitive intervention: a qualitative investigation.

PubMed

McHugh, J E; Lee, O; Aspell, N; Connolly, L; Lawlor, B A; Brennan, S

2016-09-01

Peer volunteers can be key to delivering effective social cognitive interventions due to increased potential for social modeling. We consulted peer volunteers who had just taken part in an 8-week social and nutritional mealtime intervention with older adults living alone, to seek their evaluation of the intervention. Semi-structured focus groups were used with a total of 21 volunteers (17 female) and two facilitators. Thematic analysis was used to interrogate the data. Six themes (16 sub-themes) are discussed. Peer volunteers described the importance of the socializing aspect of the intervention, of pairing considerations and compatibility in peer interventions, of considering the needs of the participant, of benefits to the volunteers, and of the practical considerations of conducting an intervention. Volunteers also discussed considerations for future research and services for older adults living alone. Volunteers found their involvement in the intervention to be personally beneficial, and revealed some valuable considerations for the researchers to take forward to future research. Results are pertinent to intervention design and could inform future social cognitive and other peer-oriented interventions for older adults living alone.

Raising the bar for reproducible science at the U.S. Environmental Protection Agency Office of Research and Development.

PubMed

George, Barbara Jane; Sobus, Jon R; Phelps, Lara P; Rashleigh, Brenda; Simmons, Jane Ellen; Hines, Ronald N

2015-05-01

Considerable concern has been raised regarding research reproducibility both within and outside the scientific community. Several factors possibly contribute to a lack of reproducibility, including a failure to adequately employ statistical considerations during study design, bias in sample selection or subject recruitment, errors in developing data inclusion/exclusion criteria, and flawed statistical analysis. To address some of these issues, several publishers have developed checklists that authors must complete. Others have either enhanced statistical expertise on existing editorial boards, or formed distinct statistics editorial boards. Although the U.S. Environmental Protection Agency, Office of Research and Development, already has a strong Quality Assurance Program, an initiative was undertaken to further strengthen statistics consideration and other factors in study design and also to ensure these same factors are evaluated during the review and approval of study protocols. To raise awareness of the importance of statistical issues and provide a forum for robust discussion, a Community of Practice for Statistics was formed in January 2014. In addition, three working groups were established to develop a series of questions or criteria that should be considered when designing or reviewing experimental, observational, or modeling focused research. This article describes the process used to develop these study design guidance documents, their contents, how they are being employed by the Agency's research enterprise, and expected benefits to Agency science. The process and guidance documents presented here may be of utility for any research enterprise interested in enhancing the reproducibility of its science. © The Author 2015. Published by Oxford University Press on behalf of the Society of Toxicology.

Public Health Information Systems: Priorities and Practices for Successful Deployments.

PubMed

Pearce, Martin

2016-01-01

A fast paced workshop designed for senior public health decision makers and clinical leaders implementing information systems to support delivery of public health programs. The tutorial will introduce public health information systems and provide best practices for implementing solutions related to immunization, communicable disease case management and outbreak management. Using a combination of formats, the tutorial will: • Highlight key functionality of public health information systems. • Review global crises currently exposing gaps and deficiencies in public health information. • Examine governance, planning, and implementation priorities. • Highlight considerations supporting implementations nationally and in special populations. • Provide real, actionable lessons learned to take away and apply in the real world.

Workarounds in the Workplace: A Second Look.

PubMed

Seaman, Jennifer B; Erlen, Judith A

2015-01-01

Nursing workarounds have garnered increased attention over the past 15 years, corresponding with an increased focus on patient safety and evidence-based practice and a rise in the use of health information technologies (HITs). Workarounds have typically been viewed as deviations from best practice that put patients at risk for poor outcomes. However, this narrow view fails to take into consideration the multifactorial origins of workarounds. The authors explore the ways in which evidence-based protocols and HIT, designed to improve patient safety and quality, can have an unintended consequence of increasing the likelihood of nurses engaging in workarounds. The article also examines workarounds considering the ethical obligations of both nurses and administrative leaders to optimize patient safety and quality.

Internet marketing 101.

PubMed

Miller, Ryan J

2010-11-01

In an era when social media sites like YouTube, Facebook, and Twitter dominate the popular press, many surgeons overlook the foundational tactics and strategies necessary for long-term practice development and lead generation on the Internet. This article analyzes common errors made by surgeons during the development and implementation of Web site projects, focusing on the areas of strategy development; domain name identification; site plan creation; design considerations; content development; vendor selection; and launch, promotion, and staff training. The article emphasizes that, because the Web site remains the foundation of a surgeon's branding message, minimizing errors during development and construction is critical, particularly in highly competitive or saturated markets, for today's facial plastic surgery practice. Copyright © 2010 Elsevier Inc. All rights reserved.

Sustainable business models: systematic approach toward successful ambulatory care pharmacy practice.

PubMed

Sachdev, Gloria

2014-08-15

This article discusses considerations for making ambulatory care pharmacist services at least cost neutral and, ideally, generate a margin that allows for service expansion. The four pillars of business sustainability are leadership, staffing, information technology, and compensation. A key facet of leadership in ambulatory care pharmacy practice is creating and expressing a clear vision for pharmacists' services. Staffing considerations include establishing training needs, maximizing efficiencies, and minimizing costs. Information technology is essential for efficiency in patient care delivery and outcomes assessment. The three domains of compensation are cost savings, pay for performance, and revenue generation. The following eight steps for designing and implementing an ambulatory care pharmacist service are discussed: (1) prepare a needs assessment, (2) analyze existing strengths, weaknesses, opportunities, and threats, (3) analyze service gaps and feasibility, (4) consider financial opportunities, (5) consider stakeholders' interests, (6) develop a business plan, (7) implement the service, and (8) measure outcomes. Potential future changes in national healthcare policy (such as pharmacist provider status and expanded pay for performance) could enhance the opportunities for sustainable ambulatory care pharmacy practice. The key challenges facing ambulatory care pharmacists are developing sustainable business models, determining which services yield a positive return on investment, and demanding payment for value-added services. Copyright © 2014 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Recommendations for the use of notebooks in upper-division physics lab courses

NASA Astrophysics Data System (ADS)

Stanley, Jacob T.; Lewandowski, H. J.

2018-01-01

The use of lab notebooks for scientific documentation is a ubiquitous part of physics research. However, it is common for undergraduate physics laboratory courses not to emphasize the development of documentation skills, despite the fact that such courses are some of the earliest opportunities for students to start engaging in this practice. One potential impediment to the inclusion of explicit documentation training is that it may be unclear to instructors which features of authentic documentation practice are efficacious to teach and how to incorporate these features into the lab class environment. In this work, we outline some of the salient features of authentic documentation, informed by interviews with physics researchers, and provide recommendations for how these can be incorporated into the lab curriculum. We do not focus on structural details or templates for notebooks. Instead, we address holistic considerations for the purpose of scientific documentation that can guide students to develop their own documentation style. While taking into consideration all the aspects that can help improve students' documentation, it is also important to consider the design of the lab activities themselves. Students should have experience with implementing these authentic features of documentation during lab activities in order for them to find practice with documentation beneficial.

The development of a practical pipe auto-routing system in a shipbuilding CAD environment using network optimization

NASA Astrophysics Data System (ADS)

Kim, Shin-Hyung; Ruy, Won-Sun; Jang, Beom Seon

2013-09-01

An automatic pipe routing system is proposed and implemented. Generally, the pipe routing design as a part of the shipbuilding process requires a considerable number of man hours due to the complexity which comes from physical and operational constraints and the crucial influence on outfitting construction productivity. Therefore, the automation of pipe routing design operations and processes has always been one of the most important goals for improvements in shipbuilding design. The proposed system is applied to a pipe routing design in the engine room space of a commercial ship. The effectiveness of this system is verified as a reasonable form of support for pipe routing design jobs. The automatic routing result of this system can serve as a good basis model in the initial stages of pipe routing design, allowing the designer to reduce their design lead time significantly. As a result, the design productivity overall can be improved with this automatic pipe routing system

The influence of different curriculum designs on students' dropout rate: a case study.

PubMed

Vergel, John; Quintero, Gustavo A; Isaza-Restrepo, Andrés; Ortiz-Fonseca, Martha; Latorre-Santos, Catalina; Pardo-Oviedo, Juan Mauricio

2018-12-01

The relationship between students' withdrawal and educational variables has generated a considerable number of publications. As the explosion of information in sciences and integration theories led to creating different curriculum designs, it has been assumed that differences among designs explain academic success and, therefore, students' retention. However, little attention has been given to examine explicitly how diverse designs influence dropout rates in practice, which questions if decisions to reform curricula are sufficiently informed. This article describes our curriculum reform, which exposes our former and current curriculum designs as having had dissimilar dropout percentages. Furthermore, we aimed to explore the influence of different curriculum designs on students' dropout rates. The conclusion is that dropout variations may be explained not only because of the curriculum design itself, but also because of the power relationship changes between teachers and students that brought out the design change. Consequently, more research is needed to fully understand the political implications of different curriculum designs and their influence on dropout rates.

The influence of different curriculum designs on students’ dropout rate: a case study

PubMed Central

Vergel, John; Quintero, Gustavo A.; Isaza-Restrepo, Andrés; Ortiz-Fonseca, Martha; Latorre-Santos, Catalina; Pardo-Oviedo, Juan Mauricio

2018-01-01

ABSTRACT The relationship between students’ withdrawal and educational variables has generated a considerable number of publications. As the explosion of information in sciences and integration theories led to creating different curriculum designs, it has been assumed that differences among designs explain academic success and, therefore, students’ retention. However, little attention has been given to examine explicitly how diverse designs influence dropout rates in practice, which questions if decisions to reform curricula are sufficiently informed. This article describes our curriculum reform, which exposes our former and current curriculum designs as having had dissimilar dropout percentages. Furthermore, we aimed to explore the influence of different curriculum designs on students’ dropout rates. The conclusion is that dropout variations may be explained not only because of the curriculum design itself, but also because of the power relationship changes between teachers and students that brought out the design change. Consequently, more research is needed to fully understand the political implications of different curriculum designs and their influence on dropout rates. PMID:29392996

Shape Memory Alloy Actuator Design: CASMART Collaborative Best Practices

NASA Technical Reports Server (NTRS)

Benafan, Othmane; Brown, Jeff; Calkins, F. Tad; Kumar, Parikshith; Stebner, Aaron; Turner, Travis; Vaidyanathan, Raj; Webster, John; Young, Marcus L.

2011-01-01

Upon examination of shape memory alloy (SMA) actuation designs, there are many considerations and methodologies that are common to them all. A goal of CASMART's design working group is to compile the collective experiences of CASMART's member organizations into a single medium that engineers can then use to make the best decisions regarding SMA system design. In this paper, a review of recent work toward this goal is presented, spanning a wide range of design aspects including evaluation, properties, testing, modeling, alloy selection, fabrication, actuator processing, design optimization, controls, and system integration. We have documented each aspect, based on our collective experiences, so that the design engineer may access the tools and information needed to successfully design and develop SMA systems. Through comparison of several case studies, it is shown that there is not an obvious single, linear route a designer can adopt to navigate the path of concept to product. SMA engineering aspects will have different priorities and emphasis for different applications.

Considerations for the Optimal Design of a Two-Way Interactive Distance Education Classroom.

ERIC Educational Resources Information Center

Gregg, Joe; Persichitte, Kay

To make effective use of a two-way interactive distance education system, classroom design should be a primary consideration. A properly designed classroom will enhance content objectives and increase acceptance of this type of instructional delivery. This paper describes key considerations for optimal design. Construction considerations include…

Principles and practices of irradiation creep experiment using pressurized mini-bellows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Byun, Thak Sang; Li, Meimei; Snead, Lance Lewis

2013-01-01

This article is to describe the key design principles and application practices of the newly developed in-reactor irradiation creep testing technology using pressurized mini-bellows. Miniature creep test frames were designed to fit into the high flux isotope reactor (HFIR) rabbit capsule whose internal diameter is slightly less than 10 mm. The most important consideration for this in-reactor creep testing technology was the ability of the small pressurized metallic bellows to survive irradiation at elevated temperatures while maintaining applied load to the specimen. Conceptual designs have been developed for inducing tension and compression stresses in specimens. Both the theoretical model andmore » the in-furnace test confirmed that a gas-pressurized bellows can produce high enough stress to induce irradiation creep in subsize specimens. Discussion focuses on the possible stress range in specimens induced by the miniature gas-pressurized bellows and the limitations imposed by the size and structure of thin-walled bellows. A brief introduction to the in-reactor creep experiment for graphite is provided to connect to the companion paper describing the application practices and irradiation creep data. An experimental and calculation procedure to obtain in-situ applied stress values from post irradiation in-furnace force measurements is also presented.« less

Traditional child health practices in communities in north-west Ethiopia.

PubMed

Dagnew, M B; Damena, M

1990-01-01

A study in 3 villages in northwest Ethiopia was designed to find the type and extent of health damaging traditional child practices. The result of the survey showed high rates of uvulectomy and milk teeth extraction, and low rates of eyelid incision and female circumcision. More than 84.5% and 98.8% of the mothers surveyed, respectively, reported milk teeth extraction as a useful treatment for diarrhea and eyelid incision in the treatment of eye disease. The damage done by milk teeth extraction includes complications from unhygienic conditions (e.g. ostitis and osteomyelitis). Although many children survive these ill advised procedures and their complications, the considerable damage done to some of the children makes these procedures serious health hazards. Intensive health education with relevant health activities to correct the use of these traditional practices is advised.

Practical internal combustion engine laser spark plug development

NASA Astrophysics Data System (ADS)

Myers, Michael J.; Myers, John D.; Guo, Baoping; Yang, Chengxin; Hardy, Christopher R.

2007-09-01

Fundamental studies on laser ignition have been performed by the US Department of Energy under ARES (Advanced Reciprocating Engines Systems) and by the California Energy Commission under ARICE (Advanced Reciprocating Internal Combustion Engine). These and other works have reported considerable increases in fuel efficiencies along with substantial reductions in green-house gas emissions when employing laser spark ignition. Practical commercial applications of this technology require low cost high peak power lasers. The lasers must be small, rugged and able to provide stable laser beam output operation under adverse mechanical and environmental conditions. New DPSS (Diode Pumped Solid State) lasers appear to meet these requirements. In this work we provide an evaluation of HESP (High Efficiency Side Pumped) DPSS laser design and performance with regard to its application as a practical laser spark plug for use in internal combustion engines.

Methodological considerations for observational coding of eating and feeding behaviors in children and their families.

PubMed

Pesch, Megan H; Lumeng, Julie C

2017-12-15

Behavioral coding of videotaped eating and feeding interactions can provide researchers with rich observational data and unique insights into eating behaviors, food intake, food selection as well as interpersonal and mealtime dynamics of children and their families. Unlike self-report measures of eating and feeding practices, the coding of videotaped eating and feeding behaviors can allow for the quantitative and qualitative examinations of behaviors and practices that participants may not self-report. While this methodology is increasingly more common, behavioral coding protocols and methodology are not widely shared in the literature. This has important implications for validity and reliability of coding schemes across settings. Additional guidance on how to design, implement, code and analyze videotaped eating and feeding behaviors could contribute to advancing the science of behavioral nutrition. The objectives of this narrative review are to review methodology for the design, operationalization, and coding of videotaped behavioral eating and feeding data in children and their families, and to highlight best practices. When capturing eating and feeding behaviors through analysis of videotapes, it is important for the study and coding to be hypothesis driven. Study design considerations include how to best capture the target behaviors through selection of a controlled experimental laboratory environment versus home mealtime, duration of video recording, number of observations to achieve reliability across eating episodes, as well as technical issues in video recording and sound quality. Study design must also take into account plans for coding the target behaviors, which may include behavior frequency, duration, categorization or qualitative descriptors. Coding scheme creation and refinement occur through an iterative process. Reliability between coders can be challenging to achieve but is paramount to the scientific rigor of the methodology. Analysis approach is dependent on the how data were coded and collapsed. Behavioral coding of videotaped eating and feeding behaviors can capture rich data "in-vivo" that is otherwise unobtainable from self-report measures. While data collection and coding are time-intensive the data yielded can be extremely valuable. Additional sharing of methodology and coding schemes around eating and feeding behaviors could advance the science and field.

When ethics constrains clinical research: trial design of control arms in "greater than minimal risk" pediatric trials.

PubMed

de Melo-Martín, Inmaculada; Sondhi, Dolan; Crystal, Ronald G

2011-09-01

For more than three decades clinical research in the United States has been explicitly guided by the idea that ethical considerations must be central to research design and practice. In spite of the centrality of this idea, attempting to balance the sometimes conflicting values of advancing scientific knowledge and protecting human subjects continues to pose challenges. Possible conflicts between the standards of scientific research and those of ethics are particularly salient in relation to trial design. Specifically, the choice of a control arm is an aspect of trial design in which ethical and scientific issues are deeply entwined. Although ethical quandaries related to the choice of control arms may arise when conducting any type of clinical trials, they are conspicuous in early phase gene transfer trials that involve highly novel approaches and surgical procedures and have children as the research subjects. Because of children's and their parents' vulnerabilities, in trials that investigate therapies for fatal, rare diseases affecting minors, the scientific and ethical concerns related to choosing appropriate controls are particularly significant. In this paper we use direct gene transfer to the central nervous system to treat late infantile neuronal ceroid lipofuscinosis to illustrate some of these ethical issues and explore possible solutions to real and apparent conflicts between scientific and ethical considerations.

Key considerations in designing a patient navigation program for colorectal cancer screening.

PubMed

DeGroff, Amy; Coa, Kisha; Morrissey, Kerry Grace; Rohan, Elizabeth; Slotman, Beth

2014-07-01

Colorectal cancer is the second leading cause of cancer mortality among those cancers affecting both men and women. Screening is known to reduce mortality by detecting cancer early and through colonoscopy, removing precancerous polyps. Only 58.6% of adults are currently up-to-date with colorectal cancer screening by any method. Patient navigation shows promise in increasing adherence to colorectal cancer screening and reducing health disparities; however, it is a complex intervention that is operationalized differently across institutions. This article describes 10 key considerations in designing a patient navigation intervention for colorectal cancer screening based on a literature review and environmental scan. Factors include (1) identifying a theoretical framework and setting program goals, (2) specifying community characteristics, (3) establishing the point(s) of intervention within the cancer continuum, (4) determining the setting in which navigation services are provided, (5) identifying the range of services offered and patient navigator responsibilities, (6) determining the background and qualifications of navigators, (7) selecting the method of communications between patients and navigators, (8) designing the navigator training, (9) defining oversight and supervision for the navigators, and (10) evaluating patient navigation. Public health practitioners can benefit from the practical perspective offered here for designing patient navigation programs. © 2013 Society for Public Health Education.

Standards for Clinical Trials in Male and Female Sexual Dysfunction: I. Phase I to Phase IV Clinical Trial Design.

PubMed

Fisher, William A; Gruenwald, Ilan; Jannini, Emmanuele A; Lev-Sagie, Ahinoam; Lowenstein, Lior; Pyke, Robert E; Reisman, Yakov; Revicki, Dennis A; Rubio-Aurioles, Eusebio

2016-12-01

This series of articles outlines standards for clinical trials of treatments for male and female sexual dysfunctions, with a focus on research design and patient-reported outcome assessment. These articles consist of revision, updating, and integration of articles on standards for clinical trials in male and female sexual dysfunction from the 2010 International Consultation on Sexual Medicine developed by the authors as part of the 2015 International Consultation on Sexual Medicine. We are guided in this effort by several principles. In contrast to previous versions of these guidelines, we merge discussion of standards for clinical trials in male and female sexual dysfunction in an integrated approach that emphasizes the common foundational practices that underlie clinical trials in the two settings. We present a common expected standard for clinical trial design in male and female sexual dysfunction, a common rationale for the design of phase I to IV clinical trials, and common considerations for selection of study population and study duration in male and female sexual dysfunction. We present a focused discussion of fundamental principles in patient- (and partner-) reported outcome assessment and complete this series of articles with specific discussions of selected aspects of clinical trials that are unique to male and to female sexual dysfunction. Our consideration of standards for clinical trials in male and female sexual dysfunction attempts to embody sensitivity to existing and new regulatory guidance and to address implications of the evolution of the diagnosis of sexual dysfunction that have been brought forward in the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition. The first article in this series focuses on phase I to phase IV clinical trial design considerations. Subsequent articles in this series focus on the measurement of patient-reported outcomes, unique aspects of clinical trial design for men, and unique aspects of clinical trial design for women. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

PubMed

Sovány, Tamás; Tislér, Zsófia; Kristó, Katalin; Kelemen, András; Regdon, Géza

2016-09-01

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product. The process design space (PDS) is usually determined by the use of design of experiment (DoE) based response surface methodologies (RSM), but inaccuracies in the applied polynomial models often resulted in the over/underestimation of the real trends and changes making the calculations uncertain, especially in the edge regions of the PDS. The completion of RSM with artificial neural network (ANN) based models is therefore a commonly used method to reduce the uncertainties. Nevertheless, since the different researches are focusing on the use of a given DoE, there is lack of comparative studies on different experimental layouts. Therefore, the aim of present study was to investigate the effect of the different DoE layouts (2 level full factorial, Central Composite, Box-Behnken, 3 level fractional and 3 level full factorial design) on the model predictability and to compare model sensitivities according to the organization of the experimental data set. It was revealed that the size of the design space could differ more than 40% calculated with different polynomial models, which was associated with a considerable shift in its position when higher level layouts were applied. The shift was more considerable when the calculation was based on RSM. The model predictability was also better with ANN based models. Nevertheless, both modelling methods exhibit considerable sensitivity to the organization of the experimental data set, and the use of design layouts is recommended, where the extreme values factors are more represented. Copyright © 2016 Elsevier B.V. All rights reserved.

Do We Need to Design Course-Based Undergraduate Research Experiences for Authenticity?

PubMed Central

Rowland, Susan; Pedwell, Rhianna; Lawrie, Gwen; Lovie-Toon, Joseph; Hung, Yu

2016-01-01

The recent push for more authentic teaching and learning in science, technology, engineering, and mathematics indicates a shared agreement that undergraduates require greater exposure to professional practices. There is considerable variation, however, in how “authentic” science education is defined. In this paper we present our definition of authenticity as it applies to an “authentic” large-scale undergraduate research experience (ALURE); we also look to the literature and the student voice for alternate perceptions around this concept. A metareview of science education literature confirmed the inconsistency in definitions and application of the notion of authentic science education. An exploration of how authenticity was explained in 604 reflections from ALURE and traditional laboratory students revealed contrasting and surprising notions and experiences of authenticity. We consider the student experience in terms of alignment with 1) the intent of our designed curriculum and 2) the literature definitions of authentic science education. These findings contribute to the conversation surrounding authenticity in science education. They suggest two things: 1) educational experiences can have significant authenticity for the participants, even when there is no purposeful design for authentic practice, and 2) the continuing discussion of and design for authenticity in UREs may be redundant. PMID:27909029

Smart skin spiral antenna with chiral absorber

NASA Astrophysics Data System (ADS)

Varadan, Vijay K.; Varadan, Vasundara V.

1995-05-01

Recently there has been considerable interest toward designing 'smart skins' for aircraft. The smart skin is a composite layer which may contain conformal radars, conformal microstrip antennas or spiral antennas for electromagnetic applications. These embedded antennas will give rise to very low radar cross section (RCS) or can be completely 'hidden' to tracking radar. In addition, they can be used to detect, monitor or even jam other unwanted electromagnetic field signatures. This paper is designed to address some technical advances made to reduce the size of spiral antennas using tunable dielectric materials and chiral absorbers. The purpose is to design, develop and fabricate a thin, wideband, conformal spiral antenna architecture that is structurally integrable and which uses advanced Penn State dielectric and absorber materials to achieve wideband ground planes, and together with low RCS. Traditional practice has been to design radome and antenna as separate entities and then resolve any interface problems during an integration phase. A structurally integrable conformal antenna, however, demands that the functional components be highly integrated both conceptually and in practice. Our concept is to use the lower skin of the radome as a substrate on which the radiator can be made using standard photolithography, thick film or LTCC techniques.

Sustainable urban stormwater management in the tropics: An evaluation of Singapore's ABC Waters Program

NASA Astrophysics Data System (ADS)

Lim, H. S.; Lu, X. X.

2016-07-01

The Active Beautiful Clean (ABC) Waters Program was implemented in 2006 as part of Singapore's stormwater management strategy and reflects the country's move towards Water Sensitive Urbanism through the adoption of Low-Impact Development (LID) ideology and practices. It is the first holistic and comprehensive LID program in the tropics and holds promise for extension to other tropical cities. This paper presents a comprehensive summary of the goals, LID practices (ABC design features) and design considerations as well as results of several monitored sites, including a constructed wetland, two rain gardens, green roofs and three canal restoration projects. We evaluate the ABC Waters Program based on these initial results and consider the challenges, issues and the research needs for it to meet its hydrological and water quality remediation goals. So far, the ABC design features evaluated perform well in removing particulates. Performance in nutrient removal is poor. With over 60 projects completed within 10 years, post-project monitoring and evaluation is necessary and complements on-going laboratory and modelling research projects conducted by local academic institutions.

Subjective memory impairment in general practice : Short overview and design of a mixed methods study.

PubMed

Pentzek, Michael; Leve, Verena; Leucht, Verena

2017-05-01

Public awareness for dementia is rising and patients with concerns about forgetfulness are not uncommon in general practice. For the general practitioner (GP) subjectively perceived memory impairment (SMI) also offers a chance to broach the issue of cognitive function with the patient. This may support GPs' patient-centered care in terms of a broader frailty concept. What is SMI (definition, operationalization, prevalence and burden)? Which conceptions and approaches do GPs have regarding SMI? Narrative overview of recent SMI criteria and results, selective utilization of results from a systematic literature search on GP dementia care, non-systematic search regarding SMI in general practice, deduction of a study design from the overview and development according to international standards. Studies revealed that approximately 60% of GP patients aged >74 reported a declining memory, every sixth person had concerns about this aspect and only relatively few seek medical advice. Concerns about SMI are considered a risk factor for future dementia. Specific general practice conceptions about SMI could not be identified in the literature. Using guidelines for mixed methods research, the design of an exploratory sequential mixed methods study is presented, which should reveal different attitudes of GPs towards SMI. Subjective memory impairment (SMI) is a common feature and troubles a considerable proportion of patients. Neuropsychiatric research is progressing, but for the transfer of the SMI concept into routine practice, involvement of GP research is necessary. A new study aims to make a contribution to this.

Numerical investigation into thermal load responses of steel railway bridge

NASA Astrophysics Data System (ADS)

Saravana Raja Mohan, K.; Sreemathy, J. R.; Saravanan, U.

2017-07-01

Bridge design requires consideration of the effects produced by temperature variations and the resultant thermal gradients in the structure. Temperature fluctuation leads to expansion and contraction of bridges and these movements are taken care by providing expansion joints and bearings. Free movements of a member can be restrained by imposing certain boundary condition but at the same time considerable allowances should be made for the stresses resulting from this restrained condition since the additional deformations and stresses produced may affect the ultimate and serviceability limit states of the structure. If the reaction force generated by the restraints is very large, then its omission can lead to unsafe design. The principal objective of this research is to study the effects of temperature variation on stresses and deflection in a steel railway bridge. A numerical model, based on finite element analysis is presented for evaluating the thermal performance of the bridge. The selected bridge is analyzed and the temperature field distribution and the corresponding thermal stresses and strains are calculated using the finite element software ABAQUS. A thorough understanding of the thermal load responses of a structure will result in safer and dependable design practices.

A Requirements-Driven Optimization Method for Acoustic Liners Using Analytic Derivatives

NASA Technical Reports Server (NTRS)

Berton, Jeffrey J.; Lopes, Leonard V.

2017-01-01

More than ever, there is flexibility and freedom in acoustic liner design. Subject to practical considerations, liner design variables may be manipulated to achieve a target attenuation spectrum. But characteristics of the ideal attenuation spectrum can be difficult to know. Many multidisciplinary system effects govern how engine noise sources contribute to community noise. Given a hardwall fan noise source to be suppressed, and using an analytical certification noise model to compute a community noise measure of merit, the optimal attenuation spectrum can be derived using multidisciplinary systems analysis methods. In a previous paper on this subject, a method deriving the ideal target attenuation spectrum that minimizes noise perceived by observers on the ground was described. A simple code-wrapping approach was used to evaluate a community noise objective function for an external optimizer. Gradients were evaluated using a finite difference formula. The subject of this paper is an application of analytic derivatives that supply precise gradients to an optimization process. Analytic derivatives improve the efficiency and accuracy of gradient-based optimization methods and allow consideration of more design variables. In addition, the benefit of variable impedance liners is explored using a multi-objective optimization.

Multiaxial and thermomechanical fatigue considerations in damage tolerant design

NASA Technical Reports Server (NTRS)

Leese, G. E.; Bill, R. C.

1985-01-01

In considering damage tolerant design concepts for gas turbine hot section components, several challenging concerns arise: Complex multiaxial loading situations are encountered; Thermomechanical fatigue loading involving very wide temperature ranges is imposed on components; Some hot section materials are extremely anisotropic; and coatings and environmental interactions play an important role in crack propagation. The effects of multiaxiality and thermomechanical fatigue are considered from the standpoint of their impact on damage tolerant design concepts. Recently obtained research results as well as results from the open literature are examined and their implications for damage tolerant design are discussed. Three important needs required to advance analytical capabilities in support of damage tolerant design become readily apparent: (1) a theoretical basis to account for the effect of nonproportional loading (mechanical and mechanical/thermal); (2) the development of practical crack growth parameters that are applicable to thermomechanical fatigue situations; and (3) the development of crack growth models that address multiple crack failures.

Critical thinking: optimal outcomes through end user involvement in the design of critical care areas.

PubMed

Braun, Debra; Barnhardt, Kim

2014-01-01

Including end users in evidence-based design is vital to outcomes. The physical environment impacts caregiver efficiencies, safety, satisfaction, and quality of patient outcomes. End users are more than members of the organization: patients should have representation as well. Patients bring value by offering insight from a different perspective. Timing is key; therefore, it is critical in obtaining desired outcomes, to include end users as early as possible, gaining the most insight into the design of the build. Consideration should also be given to best practice standards, regulatory compliance, progressive sciences, and technologies. Another vital factor is education of the end users on their role and expectations for participation in a design team. When end users are educated and understand the significance of input, the design team will be able to conceive a critical care unit that will meet needs for today and be able to adapt to needs for the future.

Maglev guideway cost and construction schedule assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkin, D.; Kim, S.

1997-05-01

A summary of construction cost and scheduling information is presented for four maglev guideway designs on an example route from Baltimore, MD to Newark, NJ. This work results from the National Maglev Initiative (NMI), a government-industry effort from 1989 to 1994. The system design concepts used as a basis for developing cost and construction scheduling information, were submitted by four industry consortia solely for this analysis, and represent their own unpublished designs. The detailed cost and construction schedule analyses cover the main guideway only. A summary estimate was made for stations, power distribution systems, maintenance facilities, and other types ofmore » infrastructure. The results of the analyses indicate a number of design aspects which must receive further consideration by future designers. These aspects will affect the practical and economic construction and long-term maintenance of a high-speed maglev guideway.« less

FMEA and consideration of real work situations for safer design of production systems.

PubMed

Lux, Aurélien; Mawo De Bikond, Johann; Etienne, Alain; Quillerou-Grivot, Edwige

2016-12-01

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.

Reliable Thermoelectric Module Design under Opposing Requirements from Structural and Thermoelectric Considerations

NASA Astrophysics Data System (ADS)

Karri, Naveen K.; Mo, Changki

2018-06-01

Structural reliability of thermoelectric generation (TEG) systems still remains an issue, especially for applications such as large-scale industrial or automobile exhaust heat recovery, in which TEG systems are subject to dynamic loads and thermal cycling. Traditional thermoelectric (TE) system design and optimization techniques, focused on performance alone, could result in designs that may fail during operation as the geometric requirements for optimal performance (especially the power) are often in conflict with the requirements for mechanical reliability. This study focused on reducing the thermomechanical stresses in a TEG system without compromising the optimized system performance. Finite element simulations were carried out to study the effect of TE element (leg) geometry such as leg length and cross-sectional shape under constrained material volume requirements. Results indicated that the element length has a major influence on the element stresses whereas regular cross-sectional shapes have minor influence. The impact of TE element stresses on the mechanical reliability is evaluated using brittle material failure theory based on Weibull analysis. An alternate couple configuration that relies on the industry practice of redundant element design is investigated. Results showed that the alternate configuration considerably reduced the TE element and metallization stresses, thereby enhancing the structural reliability, with little trade-off in the optimized performance. The proposed alternate configuration could serve as a potential design modification for improving the reliability of systems optimized for thermoelectric performance.

Classifying Residents who use Landscape Irrigation: Implications for Encouraging Water Conservation Behavior.

PubMed

Warner, Laura A; Lamm, Alexa J; Rumble, Joy N; Martin, Emmett T; Cantrell, Randall

2016-08-01

Large amounts of water applied as urban irrigation can often be reduced substantially without compromising esthetics. Thus, encouraging the adoption of water-saving technologies and practices is critical to preserving water resources, yet difficult to achieve. The research problem addressed in this study is the lack of characterization of residents who use urban irrigation, which hinders the design of effective behavior change programs. This study examined audience segmentation as an approach to encouraging change using current residential landscape practices. K-means cluster analysis identified three meaningful subgroups among residential landscape irrigation users (N = 1,063): the water considerate majority (n = 479, 45 %), water savvy conservationists (n = 378, 36 %), and unconcerned water users (n = 201, 19 %). An important finding was that normative beliefs, attitudes, and perceived behavioral control characteristics of the subgroups were significantly different with large and medium practical effect sizes. Future water conservation behaviors and perceived importance of water resources were also significantly different among subgroups. The water considerate majority demonstrated capacity to conserve, placed high value on water, and were likely to engage in behavior changes. This article contributes to the literature on individuals who use residential landscape irrigation, an important target audience with potential to conserve water through sustainable irrigation practices and technologies. Findings confirm applicability of the capacity to conserve water to audience segmentation and extend this concept by incorporating perceived value of water resources and likelihood of conservation. The results suggest practical application to promoting residential landscape water conservation behaviors based on important audience characteristics.

Optimal design of an alignment-free two-DOF rehabilitation robot for the shoulder complex.

PubMed

Galinski, Daniel; Sapin, Julien; Dehez, Bruno

2013-06-01

This paper presents the optimal design of an alignment-free exoskeleton for the rehabilitation of the shoulder complex. This robot structure is constituted of two actuated joints and is linked to the arm through passive degrees of freedom (DOFs) to drive the flexion-extension and abduction-adduction movements of the upper arm. The optimal design of this structure is performed through two steps. The first step is a multi-objective optimization process aiming to find the best parameters characterizing the robot and its position relative to the patient. The second step is a comparison process aiming to select the best solution from the optimization results on the basis of several criteria related to practical considerations. The optimal design process leads to a solution outperforming an existing solution on aspects as kinematics or ergonomics while being more simple.

Citrate-Based Biomaterials and Their Applications in Regenerative Engineering

PubMed Central

Tran, Richard T.; Yang, Jian; Ameer, Guillermo A.

2015-01-01

Advances in biomaterials science and engineering are crucial to translating regenerative engineering, an emerging field that aims to recreate complex tissues, into clinical practice. In this regard, citrate-based biomaterials have become an important tool owing to their versatile material and biological characteristics including unique antioxidant, antimicrobial, adhesive, and fluorescent properties. This review discusses fundamental design considerations, strategies to incorporate unique functionality, and examples of how citrate-based biomaterials can be an enabling technology for regenerative engineering. PMID:27004046

Aeroacoustics of Flight Vehicles: Theory and Practice. Volume 1. Noise Sources

DTIC Science & Technology

1991-08-01

243. 62 Brown, Garry L.; and Roshko, Anatol On Density Effects and Large Structure in Turbulent Mixing Layers J. Fluid Aeci, vol 64, pt 4, July 24, 1974...Structure in Jet Turbulence. J. Fluid Mech., vol. 48, pt. 3, Aug. 16, 1971, pp. 547-591. 2 Brown, Garry L., and Roshko, Anatol On Density Effects and Large...depending on such things as engine power setting and combustor and turbine design considerations. The dominant frequencies associated with both combustion

Combined-load stress-strain relationship for advanced fiber composites

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Sullivan, T. L.

1975-01-01

It was demonstrated experimentally that only one test specimen is required to determine the combined-load stress-strain relationships of a given fiber composite system. These relationships were determined using a thin angle-plied laminate tube and subjecting it to a number of combined-loading conditions. The measured data obtained are compared with theoretical predictions. Some important considerations associated with such a test are identified, and the significance of combined-load stress-strain relationships in certain practical designs are discussed.

Trajectory tracking control for a nonholonomic mobile robot under ROS

NASA Astrophysics Data System (ADS)

Lakhdar Besseghieur, Khadir; Trębiński, Radosław; Kaczmarek, Wojciech; Panasiuk, Jarosław

2018-05-01

In this paper, the implementation of the trajectory tracking control strategy on a ROS-based mobile robot is considered. Our test-bench is the nonholonomic mobile robot ‘TURTLEBOT’. ROS facilitates considerably setting-up a suitable environment to test the designed controller. Our aim is to develop a framework using ROS concepts so that a trajectory tracking controller can be implemented on any ROS-enabled mobile robot. Practical experiments with ‘TURTLEBOT’ are conducted to assess the framework reliability.

Proportional plus integral MIMO controller for regulation and tracking with anti-wind-up features

DOE Office of Scientific and Technical Information (OSTI.GOV)

Puleston, P.F.; Mantz, R.J.

1993-11-01

A proportional plus integral matrix control structure for MIMO systems is proposed. Based on a standard optimal control structure with integral action, it permits a greater degree of independence of the design and tuning of the regulating and tracking features, without considerably increasing the controller complexity. Fast recovery from load disturbances is achieved, while large overshoots associated with set-point changes and reset wind-up problems can be reduced. A simple effective procedure for practical tuning is introduced.

Using Knowledge-Based Systems to Support Learning of Organizational Knowledge: A Case Study

NASA Technical Reports Server (NTRS)

Cooper, Lynne P.; Nash, Rebecca L.; Phan, Tu-Anh T.; Bailey, Teresa R.

2003-01-01

This paper describes the deployment of a knowledge system to support learning of organizational knowledge at the Jet Propulsion Laboratory (JPL), a US national research laboratory whose mission is planetary exploration and to 'do what no one has done before.' Data collected over 19 weeks of operation were used to assess system performance with respect to design considerations, participation, effectiveness of communication mechanisms, and individual-based learning. These results are discussed in the context of organizational learning research and implications for practice.

Students' experiences with interactivity and learning in a high school physics multimedia distance learning course

NASA Astrophysics Data System (ADS)

Villarreal-Stewart, Irene

The purpose guiding this research has been to learn about and describe the phenomena of interactivity from the learners' perspectives and to learn which of the interactivity affordances and practices were actually used by students and why in the process of learning physics using an interactive multimedia distance learning course system. The bigger purpose behind learning about and describing interactivity has been to gain knowledge and perspective for its instructional design to benefit the learner, the school as curriculum implementer, and instructional media designers to create better products. Qualitative methodology in the interpretivist tradition was used, that is, in-depth interviews and on-site observations, to gain understanding of interactivity from the learners' perspective and to gain understanding of the student learning context impacting and shaping the students' interactivity experiences. NVivo was used to sort, organize and index data. All data were read on three levels: literally, interpretively, and reflexively; and were read comparatively to other perspectives to get descriptions and interpretations that were holistic to the implementation and had potential insight to improve practice for instructional designers, teachers, administrators, specifically to improve the learning experience for students. Site-Specific Findings: Students watched videos, resisted using phone and e-mail, and worked math problems to demonstrate learning, which resulted in very little interactivity, virtually no dialogue about physics, no physical activity, one-way communication, multifaceted dissatisfaction, student need for teacher involvement in the learning enterprise, student appreciation for interactivity, and expressed desire for a real, live teacher. I also found that some students did experience the system as interactive, did experience learner control and self-directed learning, and despite dissatisfaction, liked and appreciated the course. Wider Applications: Interactivity, a design element, requires scaffolding and nurturing in implementation. The variable and changing context of implementation suggests the requirement for its consideration in design work. The study suggests that during implementation the integrity of design as a whole and flexibility within the design are important continuing considerations. Recommendations. (1) implementation supervision by the school district, (2) use of a language and activity-based theory of learning and teaching and (3) dialogic inquiry (Wells, 1999) to continue learning about interactivity.

An additional study and implementation of tone calibrated technique of modulation

NASA Technical Reports Server (NTRS)

Rafferty, W.; Bechtel, L. K.; Lay, N. E.

1985-01-01

The Tone Calibrated Technique (TCT) was shown to be theoretically free from an error floor, and is only limited, in practice, by implementation constraints. The concept of the TCT transmission scheme along with a baseband implementation of a suitable demodulator is introduced. Two techniques for the generation of the TCT signal are considered: a Manchester source encoding scheme (MTCT) and a subcarrier based technique (STCT). The results are summarized for the TCT link computer simulation. The hardware implementation of the MTCT system is addressed and the digital signal processing design considerations involved in satisfying the modulator/demodulator requirements are outlined. The program findings are discussed and future direction are suggested based on conclusions made regarding the suitability of the TCT system for the transmission channel presently under consideration.

Technical considerations for implementation of x-ray CT polymer gel dosimetry.

PubMed

Hilts, M; Jirasek, A; Duzenli, C

2005-04-21

Gel dosimetry is the most promising 3D dosimetry technique in current radiation therapy practice. X-ray CT has been shown to be a feasible method of reading out polymer gel dosimeters and, with the high accessibility of CT scanners to cancer hospitals, presents an exciting possibility for clinical implementation of gel dosimetry. In this study we report on technical considerations for implementation of x-ray CT polymer gel dosimetry. Specifically phantom design, CT imaging methods, imaging time requirements and gel dose response are investigated. Where possible, recommendations are made for optimizing parameters to enhance system performance. The dose resolution achievable with an optimized system is calculated given voxel size and imaging time constraints. Results are compared with MRI and optical CT polymer gel dosimetry results available in the literature.

Design Considerations for a Water Treatment System Utilizing Ultra-Violet Light Emitting Diodes

DTIC Science & Technology

2014-03-27

DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...the United States. ii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...DISTRIBUTION UNLIMITED. iii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING

Articles on Practical Cybernetics. Computer-Developed Computers; Heuristics and Modern Sciences; Linguistics and Practice; Cybernetics and Moral-Ethical Considerations; and Men and Machines at the Chessboard.

ERIC Educational Resources Information Center

Berg, A. I.; And Others

Five articles which were selected from a Russian language book on cybernetics and then translated are presented here. They deal with the topics of: computer-developed computers, heuristics and modern sciences, linguistics and practice, cybernetics and moral-ethical considerations, and computer chess programs. (Author/JY)

Considerations for practice-based research: a cross-sectional survey of chiropractic, acupuncture and massage practices.

PubMed

Floden, Lysbeth; Howerter, Amy; Matthews, Eva; Nichter, Mark; Cunningham, James K; Ritenbaugh, Cheryl; Gordon, Judith S; Muramoto, Myra L

2015-05-02

Complementary and alternative medicine (CAM) use has steadily increased globally over the past two decades and is increasingly playing a role in the healthcare system in the United States. CAM practice-based effectiveness research requires an understanding of the settings in which CAM practitioners provide services. This paper describes and quantifies practice environment characteristics for a cross-sectional sample of doctors of chiropractic (DCs), licensed acupuncturists (LAcs), and licensed massage therapists (LMTs) in the United States. Using a cross-sectional telephone survey of DCs (n = 32), LAcs (n = 70), and LMTs (n = 184) in the Tucson, AZ metropolitan area, we collected data about each location where practitioners work, as well as measures on practitioner and practice characteristics including: patient volume, number of locations where practitioners worked, CAM practitioner types working at each location, and business models of practice. The majority of practitioners reported having one practice location (93.8% of DCs, 80% of LAcs and 59.8% of LMTs) where they treat patients. Patient volume/week was related to practitioner type; DCs saw 83.13 (SD = 49.29) patients/week, LAcs saw 22.29 (SD = 16.88) patients/week, and LMTs saw 14.21 (SD =10.25) patients per week. Practitioners completed surveys for N = 388 practice locations. Many CAM practices were found to be multidisciplinary and/or have more than one practitioner: 9/35 (25.7%) chiropractic practices, 24/87 (27.6%) acupuncture practices, and 141/266 (53.0%) massage practices. Practice business models across CAM practitioner types were heterogeneous, e.g. sole proprietor, employee, partner, and independent contractor. CAM practices vary across and within disciplines in ways that can significantly impact design and implementation of practice-based research. CAM research and intervention programs need to be mindful of the heterogeneity of CAM practices in order to create appropriate interventions, study designs, and implementation plans.

Considerations for use of dental photography and electronic media in dental education and clinical practice.

PubMed

Stieber, Jane C; Nelson, Travis; Huebner, Colleen E

2015-04-01

Photography and electronic media are indispensable tools for dental education and clinical practice. Although previous research has focused on privacy issues and general strategies to protect patient privacy when sharing clinical photographs for educational purposes, there are no published recommendations for developing a functional, privacy-compliant institutional framework for the capture, storage, transfer, and use of clinical photographs and other electronic media. The aims of this study were to research patient rights relating to electronic media and propose a framework for the use of patient media in education and clinical care. After a review of the relevant literature and consultation with the University of Washington's director of privacy and compliance and assistant attorney general, the researchers developed a privacy-compliant framework to ensure appropriate capture, storage, transfer, and use of clinical photography and electronic media. A four-part framework was created to guide the use of patient media that reflects considerations of patient autonomy and privacy, informed consent, capture and storage of media, and its transfer, use, and display. The best practices proposed for capture, storage, transfer, and use of clinical photographs and electronic media adhere to the health care code of ethics (based on patient autonomy, nonmaleficence, beneficence, justice, and veracity), which is most effectively upheld by a practical framework designed to protect patients and limit institutional liability. Educators have the opportunity and duty to convey these principles to students who will become the next generation of dentists, researchers, and educators.

Robust design optimization method for centrifugal impellers under surface roughness uncertainties due to blade fouling

NASA Astrophysics Data System (ADS)

Ju, Yaping; Zhang, Chuhua

2016-03-01

Blade fouling has been proved to be a great threat to compressor performance in operating stage. The current researches on fouling-induced performance degradations of centrifugal compressors are based mainly on simplified roughness models without taking into account the realistic factors such as spatial non-uniformity and randomness of the fouling-induced surface roughness. Moreover, little attention has been paid to the robust design optimization of centrifugal compressor impellers with considerations of blade fouling. In this paper, a multi-objective robust design optimization method is developed for centrifugal impellers under surface roughness uncertainties due to blade fouling. A three-dimensional surface roughness map is proposed to describe the nonuniformity and randomness of realistic fouling accumulations on blades. To lower computational cost in robust design optimization, the support vector regression (SVR) metamodel is combined with the Monte Carlo simulation (MCS) method to conduct the uncertainty analysis of fouled impeller performance. The analyzed results show that the critical fouled region associated with impeller performance degradations lies at the leading edge of blade tip. The SVR metamodel has been proved to be an efficient and accurate means in the detection of impeller performance variations caused by roughness uncertainties. After design optimization, the robust optimal design is found to be more efficient and less sensitive to fouling uncertainties while maintaining good impeller performance in the clean condition. This research proposes a systematic design optimization method for centrifugal compressors with considerations of blade fouling, providing a practical guidance to the design of advanced centrifugal compressors.

Practical Considerations in Pediatric Surgery

PubMed Central

Louis, Matthew R.; Meaike, Jesse D.; Chamata, Edward; Hollier, Larry H.

2016-01-01

The care of pediatric patients requires special considerations that are often not addressed in the literature. Relatively straightforward tasks such as clinical evaluation, antibiotic use, splinting, wound closure, and care of simple burns become complicated in the pediatric population for several reasons. The authors seek to demystify some of these topics using the senior author's years of clinical experience treating pediatric patients by giving practical advice and general considerations when treating children. PMID:27895539

Integrated aerodynamic/dynamic/structural optimization of helicopter rotor blades using multilevel decomposition

NASA Technical Reports Server (NTRS)

Walsh, Joanne L.; Young, Katherine C.; Pritchard, Jocelyn I.; Adelman, Howard M.; Mantay, Wayne R.

1995-01-01

This paper describes an integrated aerodynamic/dynamic/structural (IADS) optimization procedure for helicopter rotor blades. The procedure combines performance, dynamics, and structural analyses with a general-purpose optimizer using multilevel decomposition techniques. At the upper level, the structure is defined in terms of global quantities (stiffness, mass, and average strains). At the lower level, the structure is defined in terms of local quantities (detailed dimensions of the blade structure and stresses). The IADS procedure provides an optimization technique that is compatible with industrial design practices in which the aerodynamic and dynamic designs are performed at a global level and the structural design is carried out at a detailed level with considerable dialog and compromise among the aerodynamic, dynamic, and structural groups. The IADS procedure is demonstrated for several examples.

Multilevel decomposition approach to integrated aerodynamic/dynamic/structural optimization of helicopter rotor blades

NASA Technical Reports Server (NTRS)

Walsh, Joanne L.; Young, Katherine C.; Pritchard, Jocelyn I.; Adelman, Howard M.; Mantay, Wayne R.

1994-01-01

This paper describes an integrated aerodynamic, dynamic, and structural (IADS) optimization procedure for helicopter rotor blades. The procedure combines performance, dynamics, and structural analyses with a general purpose optimizer using multilevel decomposition techniques. At the upper level, the structure is defined in terms of local quantities (stiffnesses, mass, and average strains). At the lower level, the structure is defined in terms of local quantities (detailed dimensions of the blade structure and stresses). The IADS procedure provides an optimization technique that is compatible with industrial design practices in which the aerodynamic and dynamic design is performed at a global level and the structural design is carried out at a detailed level with considerable dialogue and compromise among the aerodynamic, dynamic, and structural groups. The IADS procedure is demonstrated for several cases.

Design Considerations for Miniaturized Control Moment Gyroscopes for Rapid Retargeting and Precision Pointing of Small Satellites

NASA Technical Reports Server (NTRS)

Patankar, Kunal; Fitz-Coy, Norman; Roithmayr, Carlos M.

2014-01-01

This paper presents the design as well as characterization of a practical control moment gyroscope (CMG) based attitude control system (ACS) for small satellites in the 15-20 kilogram mass range performing rapid retargeting and precision pointing maneuvers. The paper focuses on the approach taken in the design of miniaturized CMGs while considering the constraints imposed by the use of commercial off-the-shelf (COTS) components as well as the size of the satellite. It is shown that a hybrid mode is more suitable for COTS based moment exchange actuators; a mode that uses the torque amplification of CMGs for rapid retargeting and direct torque capabilities of the flywheel motors for precision pointing. A simulation is provided to demonstrate on-orbit slew and pointing performance.

Input and output constraints-based stabilisation of switched nonlinear systems with unstable subsystems and its application

NASA Astrophysics Data System (ADS)

Chen, Chao; Liu, Qian; Zhao, Jun

2018-01-01

This paper studies the problem of stabilisation of switched nonlinear systems with output and input constraints. We propose a recursive approach to solve this issue. None of the subsystems are assumed to be stablisable while the switched system is stabilised by dual design of controllers for subsystems and a switching law. When only dealing with bounded input, we provide nested switching controllers using an extended backstepping procedure. If both input and output constraints are taken into consideration, a Barrier Lyapunov Function is employed during operation to construct multiple Lyapunov functions for switched nonlinear system in the backstepping procedure. As a practical example, the control design of an equilibrium manifold expansion model of aero-engine is given to demonstrate the effectiveness of the proposed design method.

The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 3

NASA Technical Reports Server (NTRS)

Onwubiko, Chin-Yere; Onyebueke, Landon

1996-01-01

Structural failure is rarely a "sudden death" type of event, such sudden failures may occur only under abnormal loadings like bomb or gas explosions and very strong earthquakes. In most cases, structures fail due to damage accumulated under normal loadings such as wind loads, dead and live loads. The consequence of cumulative damage will affect the reliability of surviving components and finally causes collapse of the system. The cumulative damage effects on system reliability under time-invariant loadings are of practical interest in structural design and therefore will be investigated in this study. The scope of this study is, however, restricted to the consideration of damage accumulation as the increase in the number of failed components due to the violation of their strength limits.

16 CFR 1012.1 - General policy considerations; scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Policy, sets forth requirements for advance public notice, public attendance, and recordkeeping for... 16 Commercial Practices 2 2010-01-01 2010-01-01 false General policy considerations; scope. 1012.1 Section 1012.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL MEETINGS POLICY-MEETINGS...

Evaluating Emotional Well-Being after a Short-Term Traditional Yoga Practice Approach in Yoga Practitioners with an Existing Western-Type Yoga Practice.

PubMed

Meissner, Maxi; Cantell, Marja H; Steiner, Ronald; Sanchez, Xavier

2016-01-01

The purpose of the present study was to examine the influence of a traditional yoga practice approach (morning daily practice, TY) compared to that of a Western yoga practice approach (once-twice weekly, evening practice, WY) on determinants of emotional well-being. To that end, in a pre/posttest between-subject design, measures of positive (PA) and negative affect (NA), mindfulness, perceived stress, and arousal states were taken in 24 healthy participants (20 women; mean age: 30.5, SD = 8.1 years) with an already existing WY practice, who either maintained WY or underwent a 2-week, five-times-per-week morning practice (TY). While WY participants maintained baseline values for all measures taken, TY participants showed significant beneficial changes for PA, NA, and mindfulness and a trend for improved ability to cope with stress at the completion of the intervention. Furthermore, TY participants displayed decreased subjective energy and energetic arousal. Altogether, findings indicate that the 2-week TY is beneficial over WY for improving perceived emotional well-being. The present findings (1) undermine and inspire a careful consideration and utilization of yoga practice approach to elicit the best benefits for emotional well-being and (2) support yoga as an evidence-based practice among healthy yoga practitioners.

Method for collecting thermocouple data via secured shell over a wireless local area network in real time

NASA Astrophysics Data System (ADS)

Arnold, F.; DeMallie, I.; Florence, L.; Kashinski, D. O.

2015-03-01

This manuscript addresses the design, hardware details, construction, and programming of an apparatus allowing an experimenter to monitor and record high-temperature thermocouple measurements of dynamic systems in real time. The apparatus uses wireless network technology to bridge the gap between a dynamic (moving) sample frame and the static laboratory frame. Our design is a custom solution applied to samples that rotate through large angular displacements where hard-wired and typical slip-ring solutions are not practical because of noise considerations. The apparatus consists of a Raspberry PI mini-Linux computer, an Arduino micro-controller, an Ocean Controls thermocouple multiplexer shield, and k-type thermocouples.

Method for collecting thermocouple data via secured shell over a wireless local area network in real time.

PubMed

Arnold, F; DeMallie, I; Florence, L; Kashinski, D O

2015-03-01

This manuscript addresses the design, hardware details, construction, and programming of an apparatus allowing an experimenter to monitor and record high-temperature thermocouple measurements of dynamic systems in real time. The apparatus uses wireless network technology to bridge the gap between a dynamic (moving) sample frame and the static laboratory frame. Our design is a custom solution applied to samples that rotate through large angular displacements where hard-wired and typical slip-ring solutions are not practical because of noise considerations. The apparatus consists of a Raspberry PI mini-Linux computer, an Arduino micro-controller, an Ocean Controls thermocouple multiplexer shield, and k-type thermocouples.

Amino acids as promoieties in prodrug design and development.

PubMed

Vig, Balvinder S; Huttunen, Kristiina M; Laine, Krista; Rautio, Jarkko

2013-10-01

Prodrugs are biologically inactive agents that upon biotransformation in vivo result in active drug molecules. Since prodrugs might alter the tissue distribution, efficacy and the toxicity of the parent drug, prodrug design should be considered at the early stages of preclinical development. In this regard, natural and synthetic amino acids offer wide structural diversity and physicochemical properties. This review covers the use of amino acid prodrugs to improve poor solubility, poor permeability, sustained release, intravenous delivery, drug targeting, and metabolic stability of the parent drug. In addition, practical considerations and challenges associated with the development of amino acid prodrugs are also covered. Copyright © 2012 Elsevier B.V. All rights reserved.

Quality Factor Effect on the Wireless Range of Microstrip Patch Antenna Strain Sensors

PubMed Central

Daliri, Ali; Galehdar, Amir; Rowe, Wayne S. T.; John, Sabu; Wang, Chun H.; Ghorbani, Kamran

2014-01-01

Recently introduced passive wireless strain sensors based on microstrip patch antennas have shown great potential for reliable health and usage monitoring in aerospace and civil industries. However, the wireless interrogation range of these sensors is limited to few centimeters, which restricts their practical application. This paper presents an investigation on the effect of circular microstrip patch antenna (CMPA) design on the quality factor and the maximum practical wireless reading range of the sensor. The results reveal that by using appropriate substrate materials the interrogation distance of the CMPA sensor can be increased four-fold, from the previously reported 5 to 20 cm, thus improving considerably the viability of this type of wireless sensors for strain measurement and damage detection. PMID:24451457

[Melancholy between medicine and religion: from a pathology of religious behaviour to a pathological practice of religion].

PubMed

Crignon-De Oliveira, Claire

2006-01-01

By proposing in 1621 to create the completely separate category of religious melancholy, Burton inaugurated the medicalisation of religious controversy which developed considerably after the English Civil Wars. While religious melancholy was a useful critical and polemical weapon for all the defenders of Anglican orthodoxy trying to present fanatics (enthusiasts) and atheists as sick people suffering from a humoural imbalance, it finally came in the early 18th century to designate a certain way of practising religion or alternatively the behaviour of those who devoted their lives to religion. The present article examines this transition from a medical interpretation of nonconformist religious behaviour to the identification of a pathological practice of religion.

Quality factor effect on the wireless range of microstrip patch antenna strain sensors.

PubMed

Daliri, Ali; Galehdar, Amir; Rowe, Wayne S T; John, Sabu; Wang, Chun H; Ghorbani, Kamran

2014-01-02

Recently introduced passive wireless strain sensors based on microstrip patch antennas have shown great potential for reliable health and usage monitoring in aerospace and civil industries. However, the wireless interrogation range of these sensors is limited to few centimeters, which restricts their practical application. This paper presents an investigation on the effect of circular microstrip patch antenna (CMPA) design on the quality factor and the maximum practical wireless reading range of the sensor. The results reveal that by using appropriate substrate materials the interrogation distance of the CMPA sensor can be increased four-fold, from the previously reported 5 to 20 cm, thus improving considerably the viability of this type of wireless sensors for strain measurement and damage detection.

The case for integrating grounded theory and participatory action research: empowering clients to inform professional practice.

PubMed

Teram, Eli; Schachter, Candice L; Stalker, Carol A

2005-10-01

Grounded theory and participatory action research methods are distinct approaches to qualitative inquiry. Although grounded theory has been conceptualized in constructivist terms, it has elements of positivist thinking with an image of neutral search for objective truth through rigorous data collection and analysis. Participatory action research is based on a critique of this image and calls for more inclusive research processes. It questions the possibility of objective social sciences and aspires to engage people actively in all stages of generating knowledge. The authors applied both approaches in a project designed to explore the experiences of female survivors of childhood sexual abuse with physical therapy and subsequently develop a handbook on sensitive practice for clinicians that takes into consideration the needs and perspectives of these clients. Building on this experience, they argue that the integration of grounded theory and participatory action research can empower clients to inform professional practice.

Propagation of Computational Uncertainty Using the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2007-01-01

This paper describes the use of formally designed experiments to aid in the error analysis of a computational experiment. A method is described by which the underlying code is approximated with relatively low-order polynomial graduating functions represented by truncated Taylor series approximations to the true underlying response function. A resource-minimal approach is outlined by which such graduating functions can be estimated from a minimum number of case runs of the underlying computational code. Certain practical considerations are discussed, including ways and means of coping with high-order response functions. The distributional properties of prediction residuals are presented and discussed. A practical method is presented for quantifying that component of the prediction uncertainty of a computational code that can be attributed to imperfect knowledge of independent variable levels. This method is illustrated with a recent assessment of uncertainty in computational estimates of Space Shuttle thermal and structural reentry loads attributable to ice and foam debris impact on ascent.

Ethical adoption: A new imperative in the development of technology for dementia.

PubMed

Robillard, Julie M; Cleland, Ian; Hoey, Jesse; Nugent, Chris

2018-06-19

Technology interventions are showing promise to assist persons with dementia and their carers. However, low adoption rates for these technologies and ethical considerations have impeded the realization of their full potential. Building on recent evidence and an iterative framework development process, we propose the concept of "ethical adoption": the deep integration of ethical principles into the design, development, deployment, and usage of technology. Ethical adoption is founded on five pillars, supported by empirical evidence: (1) inclusive participatory design; (2) emotional alignment; (3) adoption modelling; (4) ethical standards assessment; and (5) education and training. To close the gap between adoption research, ethics and practice, we propose a set of 18 practical recommendations based on these ethical adoption pillars. Through the implementation of these recommendations, researchers and technology developers alike will benefit from evidence-informed guidance to ensure their solution is adopted in a way that maximizes the benefits to people with dementia and their carers while minimizing possible harm. Copyright © 2018 the Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Use of Patient Portals for Personal Health Information Management: The Older Adult Perspective

PubMed Central

Turner, Anne M.; Osterhage, Katie; Hartzler, Andrea; Joe, Jonathan; Lin, Lorelei; Kanagat, Natasha; Demiris, George

2015-01-01

The personal health information management (PHIM) practices and needs of older adults are poorly understood. We describe initial results from the UW SOARING project (Studying Older Adults & Researching Information Needs and Goals), a participatory design investigation of PHIM in older adults (60 years and older). We conducted in-depth interviews with older adults (n=74) living in a variety of residential settings about their management of personal health information. A surprising 20% of participants report using patient portals and another 16% reported prior use or anticipated use of portals in the future. Participants cite ease of access to health information and direct communication with providers as valuable portal features. Barriers to the use of patient portals include a general lack of computer proficiency, high internet costs and security concerns. Design features based on consideration of needs and practices of older adults will facilitate appeal and maximize usability; both are elements critical to adoption of tools such as patient portals that can support older adults and PHIM. PMID:26958263

Pedagogical strategies to teach bachelor students evidence-based practice: A systematic review.

PubMed

Aglen, B

2016-01-01

The aim of this study is to review international scientific articles about pedagogical strategies to teach nursing students at bachelor degree evidence-based practice (EBP). A literature review including peer reviewed, original, empirical articles describing pedagogical interventions aimed at teaching bachelor's degree nursing students EBP in the period 2004-2014. Theories of discretion, knowledge transfer and cognitive maturity development are used as analytical perspectives. The main challenge teaching evidence based practice is that the students fail to see how research findings contribute to nursing practice. The pedagogical strategies described are student active learning methods to teach the students information literacy and research topics. Information literacy is mainly taught according to the stages of EBP. These stages focus on how to elaborate evidence from research findings for implementation into nursing practice. The articles reviewed mainly use qualitative, descriptive designs and formative evaluations of the pedagogical interventions. Although a considerable effort in teaching information literacy and research topics, nursing students still struggle to see the relevance evidence for nursing practice. Before being introduced to information literacy and research topics, students need insight into knowledge transfer and their own epistemic assumptions. Knowledge transfer related to clinical problems should be the learning situations prioritized when teaching EBP at bachelor level. Theoretical perspectives of cognitive maturity development, knowledge transfer and discretion in professional practice give alternative ways of designing pedagogical strategies for EBP. More research is needed to develop and test pedagogical strategies for EBP in light of these theories. Copyright © 2015. Published by Elsevier Ltd.

Oropharyngeal dysphagia: surveying practice patterns of the speech-language pathologist.

PubMed

Martino, Rosemary; Pron, Gaylene; Diamant, Nicholas E

2004-01-01

The present study was designed to obtain a comprehensive view of the dysphagia assessment practice patterns of speech-language pathologists and their opinion on the importance of these practices using survey methods and taking into consideration clinician, patient, and practice-setting variables. A self-administered mail questionnaire was developed following established methodology to maximize response rates. Eight dysphagia experts independently rated the new survey for content validity. Test-retest reliability was assessed with a random sample of 23 participants. The survey was sent to 50 speech-language pathologists randomly selected from the Canadian professional association database of members who practice in dysphagia. Surveys were mailed according to the Dillman Total Design Method and included an incentive offer. High survey (64%) and item response (95%) rates were achieved and clinicians were reliable reporters of their practice behaviors (ICC>0.60). Of all the clinical assessment items, 36% were reported with high (>80%) utilization and 24% with low (<20%) utilization, the former pertaining to tongue motion and vocal quality after food/fluid intake and the latter to testing of oral sensation without food. One-third (33%) of instrumental assessment items were highly utilized and included assessment of bolus movement and laryngeal response to bolus misdirection. Overall, clinician experience and teaching institutions influenced greater utilization. Opinions of importance were similar to utilization behaviors (r = 0.947, p = 0.01). Of all patients referred for dysphagia assessment, full clinical assessments were administered to 71% of patients but instrumental assessments to only 36%. A hierarchical model of practice behavior is proposed to explain this pattern of progressively decreasing item utilization.

16 CFR 1061.12 - Commission consideration on merits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Commission consideration on merits. 1061.12 Section 1061.12 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL APPLICATIONS FOR EXEMPTION... available and relevant information on the proposal. (c) The Commission's evaluation will focus on: (1...

Students who are deaf and hard of hearing and use sign language: considerations and strategies for developing spoken language and literacy skills.

PubMed

Nussbaum, Debra; Waddy-Smith, Bettie; Doyle, Jane

2012-11-01

There is a core body of knowledge, experience, and skills integral to facilitating auditory, speech, and spoken language development when working with the general population of students who are deaf and hard of hearing. There are additional issues, strategies, and challenges inherent in speech habilitation/rehabilitation practices essential to the population of deaf and hard of hearing students who also use sign language. This article will highlight philosophical and practical considerations related to practices used to facilitate spoken language development and associated literacy skills for children and adolescents who sign. It will discuss considerations for planning and implementing practices that acknowledge and utilize a student's abilities in sign language, and address how to link these skills to developing and using spoken language. Included will be considerations for children from early childhood through high school with a broad range of auditory access, language, and communication characteristics. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Blueprint for a deliberative public forum on biobanking policy: were theoretical principles achievable in practice?

PubMed

Molster, Caron; Maxwell, Susannah; Youngs, Leanne; Kyne, Gaenor; Hope, Fiona; Dawkins, Hugh; O'Leary, Peter

2013-06-01

Public deliberation is recommended for obtaining citizen input to policy development when policies involve contested ethical dimensions, diverse perspectives on how to trade-off competing public interests and low public awareness of these perspectives. Several norms have been proposed for the design of deliberative methods. Evidence is scarce regarding whether such norms are achievable in practice. This paper refers to principles of deliberative democracy theory to describe a deliberative public forum on biobanking. Practical challenges and contextual facilitators of achieving deliberative ideals are discussed, along with factors that influenced use of the forum output in policy development. The forum ran for 4 days over two weekends in Perth, Western Australia. Key methodological features were socio-demographic stratification to randomly recruit a mini-public of citizens for discursive representation, provision of information inclusive of diverse perspectives and framed for difference, provision of a fair way for reasoning and collective decision making and adoption of processes to achieve publicity, accountability and independence from undue institutional influence. Most design principles were achieved in practice, with the fundamental exception of representativeness. Factors influencing these outcomes, and the use of deliberated outputs to develop policy, included institutional characteristics, the design involvement of deliberative experts and quality of the outputs when compared to other consultation methods. Public deliberations can achieve design ideals and influence (ethics-based) public health policy. The representation of 'hard to reach' citizens and their views needs further consideration, particularly as this relates to the procedural legitimacy of ethical analyses and the just inclusion of deliberative citizen advice within the broader policy-making process. © 2011 John Wiley & Sons Ltd.

Blueprint for a deliberative public forum on biobanking policy: were theoretical principles achievable in practice?

PubMed Central

Molster, Caron; Maxwell, Susannah; Youngs, Leanne; Kyne, Gaenor; Hope, Fiona; Dawkins, Hugh; O’Leary, Peter

2011-01-01

Abstract Background:  Public deliberation is recommended for obtaining citizen input to policy development when policies involve contested ethical dimensions, diverse perspectives on how to trade‐off competing public interests and low public awareness of these perspectives. Several norms have been proposed for the design of deliberative methods. Evidence is scarce regarding whether such norms are achievable in practice. Purpose:  This paper refers to principles of deliberative democracy theory to describe a deliberative public forum on biobanking. Practical challenges and contextual facilitators of achieving deliberative ideals are discussed, along with factors that influenced use of the forum output in policy development. Method:  The forum ran for 4 days over two weekends in Perth, Western Australia. Key methodological features were socio‐demographic stratification to randomly recruit a mini‐public of citizens for discursive representation, provision of information inclusive of diverse perspectives and framed for difference, provision of a fair way for reasoning and collective decision making and adoption of processes to achieve publicity, accountability and independence from undue institutional influence. Results:  Most design principles were achieved in practice, with the fundamental exception of representativeness. Factors influencing these outcomes, and the use of deliberated outputs to develop policy, included institutional characteristics, the design involvement of deliberative experts and quality of the outputs when compared to other consultation methods. Conclusions:  Public deliberations can achieve design ideals and influence (ethics‐based) public health policy. The representation of ‘hard to reach’ citizens and their views needs further consideration, particularly as this relates to the procedural legitimacy of ethical analyses and the just inclusion of deliberative citizen advice within the broader policy‐making process. PMID:21645188

Inferring topologies via driving-based generalized synchronization of two-layer networks

NASA Astrophysics Data System (ADS)

Wang, Yingfei; Wu, Xiaoqun; Feng, Hui; Lu, Jun-an; Xu, Yuhua

2016-05-01

The interaction topology among the constituents of a complex network plays a crucial role in the network’s evolutionary mechanisms and functional behaviors. However, some network topologies are usually unknown or uncertain. Meanwhile, coupling delays are ubiquitous in various man-made and natural networks. Hence, it is necessary to gain knowledge of the whole or partial topology of a complex dynamical network by taking into consideration communication delay. In this paper, topology identification of complex dynamical networks is investigated via generalized synchronization of a two-layer network. Particularly, based on the LaSalle-type invariance principle of stochastic differential delay equations, an adaptive control technique is proposed by constructing an auxiliary layer and designing proper control input and updating laws so that the unknown topology can be recovered upon successful generalized synchronization. Numerical simulations are provided to illustrate the effectiveness of the proposed method. The technique provides a certain theoretical basis for topology inference of complex networks. In particular, when the considered network is composed of systems with high-dimension or complicated dynamics, a simpler response layer can be constructed, which is conducive to circuit design. Moreover, it is practical to take into consideration perturbations caused by control input. Finally, the method is applicable to infer topology of a subnetwork embedded within a complex system and locate hidden sources. We hope the results can provide basic insight into further research endeavors on understanding practical and economical topology inference of networks.

Replication initiatives will not salvage the trustworthiness of psychology.

PubMed

Coyne, James C

2016-05-31

Replication initiatives in psychology continue to gather considerable attention from far outside the field, as well as controversy from within. Some accomplishments of these initiatives are noted, but this article focuses on why they do not provide a general solution for what ails psychology. There are inherent limitations to mass replications ever being conducted in many areas of psychology, both in terms of their practicality and their prospects for improving the science. Unnecessary compromises were built into the ground rules for design and publication of the Open Science Collaboration: Psychology that undermine its effectiveness. Some ground rules could actually be flipped into guidance for how not to conduct replications. Greater adherence to best publication practices, transparency in the design and publishing of research, strengthening of independent post-publication peer review and firmer enforcement of rules about data sharing and declarations of conflict of interest would make many replications unnecessary. Yet, it has been difficult to move beyond simple endorsement of these measures to consistent implementation. Given the strong institutional support for questionable publication practices, progress will depend on effective individual and collective use of social media to expose lapses and demand reform. Some recent incidents highlight the necessity of this.

The optimization of wireless power transmission: design and realization.

PubMed

Jia, Zhiwei; Yan, Guozheng; Liu, Hua; Wang, Zhiwu; Jiang, Pingping; Shi, Yu

2012-09-01

A wireless power transmission system is regarded as a practical way of solving power-shortage problems in multifunctional active capsule endoscopes. The uniformity of magnetic flux density, frequency stability and orientation stability are used to evaluate power transmission stability, taking into consideration size and safety constraints. Magnetic field safety and temperature rise are also considered. Test benches are designed to measure the relevent parameters. Finally, a mathematical programming model in which these constraints are considered is proposed to improve transmission efficiency. To verify the feasibility of the proposed method, various systems for a wireless active capsule endoscope are designed and evaluated. The optimal power transmission system has the capability to supply continuously at least 500 mW of power with a transmission efficiency of 4.08%. The example validates the feasibility of the proposed method. Introduction of novel designs enables further improvement of this method. Copyright © 2012 John Wiley & Sons, Ltd.

Patterns of informal reasoning in the context of socioscientific decision making

NASA Astrophysics Data System (ADS)

Sadler, Troy D.; Zeidler, Dana L.

2005-01-01

The purpose of this study is to contribute to a theoretical knowledge base through research by examining factors salient to science education reform and practice in the context of socioscientific issues. The study explores how individuals negotiate and resolve genetic engineering dilemmas. A qualitative approach was used to examine patterns of informal reasoning and the role of morality in these processes. Thirty college students participated individually in two semistructured interviews designed to explore their informal reasoning in response to six genetic engineering scenarios. Students demonstrated evidence of rationalistic, emotive, and intuitive forms of informal reasoning. Rationalistic informal reasoning described reason-based considerations; emotive informal reasoning described care-based considerations; and intuitive reasoning described considerations based on immediate reactions to the context of a scenario. Participants frequently relied on combinations of these reasoning patterns as they worked to resolve individual socioscientific scenarios. Most of the participants appreciated at least some of the moral implications of their decisions, and these considerations were typically interwoven within an overall pattern of informal reasoning. These results highlight the need to ensure that science classrooms are environments in which intuition and emotion in addition to reason are valued. Implications and recommendations for future research are discussed.

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Alternate design considerations. 177.340 Section 177.340... TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design, unusual form, or special materials, which cannot be reviewed or...

ENGINEERING AND CONSTRUCTING THE HALLAM NUCLEAR POWER FACILITY REACTOR STRUCTURE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahlmeister, J E; Haberer, W V; Casey, D F

1960-12-15

The Hallam Nuclear Power Facility reactor structure, including the cavity liner, is described, and the design philosophy and special design requirements which were developed during the preliminary and final engineering phases of the project are explained. The structure was designed for 600 deg F inlet and 1000 deg F outlet operating sodium temperatures and fabricated of austenitic and ferritic stainless steels. Support for the reactor core components and adequate containment for biological safeguards were readily provided even though quite conservative design philosophy was used. The calculated operating characteristics, including heat generation, temperature distributions and stress levels for full-power operation, aremore » summarized. Ship fabrication and field installation experiences are also briefly related. Results of this project have established that the sodium graphite reactor permits practical and economical fabrication and field erection procedures; considerably higher operating design temperatures are believed possible without radical design changes. Also, larger reactor structures can be similarly constructed for higher capacity (300 to 1000 Mwe) nuclear power plants. (auth)« less

Examining the design features of a communication-rich, problem-centred mathematics professional development

NASA Astrophysics Data System (ADS)

de Araujo, Zandra; Orrill, Chandra Hawley; Jacobson, Erik

2018-04-01

While there is considerable scholarship describing principles for effective professional development, there have been few attempts to examine these principles in practice. In this paper, we identify and examine the particular design features of a mathematics professional development experience provided for middle grades teachers over 14 weeks. The professional development was grounded in a set of mathematical tasks that each had one right answer, but multiple solution paths. The facilitator engaged participants in problem solving and encouraged participants to work collaboratively to explore different solution paths. Through analysis of this collaborative learning environment, we identified five design features for supporting teacher learning of important mathematics and pedagogy in a problem-solving setting. We discuss these design features in depth and illustrate them by presenting an elaborated example from the professional development. This study extends the existing guidance for the design of professional development by examining and operationalizing the relationships among research-based features of effective professional development and the enacted features of a particular design.

Researching Lesbian, Gay, and Bisexual Youth: Conceptual, Practical, and Ethical Considerations

ERIC Educational Resources Information Center

D'Augelli, Anthony R.; Grossman, Arnold H.

2006-01-01

Developmental and educational researchers have overlooked the development of sexual orientation among adolescents and youth, even as they study sexual development and identity development during adolescence. This paper examines some conceptual, practical, and ethical considerations involved in conducting research on lesbian, gay, and bisexual…

Translation of proteomic biomarkers into FDA approved cancer diagnostics: issues and challenges

PubMed Central

2013-01-01

Tremendous efforts have been made over the past few decades to discover novel cancer biomarkers for use in clinical practice. However, a striking discrepancy exists between the effort directed toward biomarker discovery and the number of markers that make it into clinical practice. One of the confounding issues in translating a novel discovery into clinical practice is that quite often the scientists working on biomarker discovery have limited knowledge of the analytical, diagnostic, and regulatory requirements for a clinical assay. This review provides an introduction to such considerations with the aim of generating more extensive discussion for study design, assay performance, and regulatory approval in the process of translating new proteomic biomarkers from discovery into cancer diagnostics. We first describe the analytical requirements for a robust clinical biomarker assay, including concepts of precision, trueness, specificity and analytical interference, and carryover. We next introduce the clinical considerations of diagnostic accuracy, receiver operating characteristic analysis, positive and negative predictive values, and clinical utility. We finish the review by describing components of the FDA approval process for protein-based biomarkers, including classification of biomarker assays as medical devices, analytical and clinical performance requirements, and the approval process workflow. While we recognize that the road from biomarker discovery, validation, and regulatory approval to the translation into the clinical setting could be long and difficult, the reward for patients, clinicians and scientists could be rather significant. PMID:24088261

Practical Considerations for Optimizing Position Sensitivity in Arrays of Position-sensitive TES's

NASA Technical Reports Server (NTRS)

Smith, Stephen J.; Bandler, Simon R.; Figueroa-Feliciano, Encetali; Iyomoto, Naoko; Kelley, Richard L.; Kilbourne, Caroline A.; Porder, Frederick S.; Sadleir, John E.

2007-01-01

We are developing Position-Sensitive Transitions-Edge Sensors (PoST's) for future X-ray astronomy missions such as NASA's Constellation-X. The PoST consists of one or more Transitions Edge Sensors (TES's) thermally connected to a large X-ray absorber, which through heat diffusion, gives rise to position dependence. The development of PoST's is motivated by the desire to achieve the largest the focal-plan coverage with the fewest number of readout channels. In order to develop a practical array, consisting of an inner pixellated core with an outer array of large absorber PoST's, we must be able to simultaneously read out all (-1800) channels in the array. This is achievable using time division multiplexing (TDM), but does set stringent slew rate requirements on the array. Typically, we must damp the pulses to reduce the slew rate of the input signal to the TDM. This is achieved by applying a low-pass analog filter with large inductance to the signal. This attenuates the high frequency components of the signal, essential for position discrimination in PoST's, relative to the white noise of the readout chain and degrades the position sensitivity. Using numerically simulated data, we investigate the position sensing ability of typical PoST designs under such high inductance conditions. We investigate signal-processing techniques for optimal determination of the event position and discuss the practical considerations for real-time implementation.

Adaptive trial designs: a review of barriers and opportunities

PubMed Central

2012-01-01

Adaptive designs allow planned modifications based on data accumulating within a study. The promise of greater flexibility and efficiency stimulates increasing interest in adaptive designs from clinical, academic, and regulatory parties. When adaptive designs are used properly, efficiencies can include a smaller sample size, a more efficient treatment development process, and an increased chance of correctly answering the clinical question of interest. However, improper adaptations can lead to biased studies. A broad definition of adaptive designs allows for countless variations, which creates confusion as to the statistical validity and practical feasibility of many designs. Determining properties of a particular adaptive design requires careful consideration of the scientific context and statistical assumptions. We first review several adaptive designs that garner the most current interest. We focus on the design principles and research issues that lead to particular designs being appealing or unappealing in particular applications. We separately discuss exploratory and confirmatory stage designs in order to account for the differences in regulatory concerns. We include adaptive seamless designs, which combine stages in a unified approach. We also highlight a number of applied areas, such as comparative effectiveness research, that would benefit from the use of adaptive designs. Finally, we describe a number of current barriers and provide initial suggestions for overcoming them in order to promote wider use of appropriate adaptive designs. Given the breadth of the coverage all mathematical and most implementation details are omitted for the sake of brevity. However, the interested reader will find that we provide current references to focused reviews and original theoretical sources which lead to details of the current state of the art in theory and practice. PMID:22917111

When Ethics Constrains Clinical Research: Trial Design of Control Arms in “Greater Than Minimal Risk” Pediatric Trials

PubMed Central

de Melo-Martín, Inmaculada; Sondhi, Dolan

2011-01-01

Abstract For more than three decades clinical research in the United States has been explicitly guided by the idea that ethical considerations must be central to research design and practice. In spite of the centrality of this idea, attempting to balance the sometimes conflicting values of advancing scientific knowledge and protecting human subjects continues to pose challenges. Possible conflicts between the standards of scientific research and those of ethics are particularly salient in relation to trial design. Specifically, the choice of a control arm is an aspect of trial design in which ethical and scientific issues are deeply entwined. Although ethical quandaries related to the choice of control arms may arise when conducting any type of clinical trials, they are conspicuous in early phase gene transfer trials that involve highly novel approaches and surgical procedures and have children as the research subjects. Because of children's and their parents' vulnerabilities, in trials that investigate therapies for fatal, rare diseases affecting minors, the scientific and ethical concerns related to choosing appropriate controls are particularly significant. In this paper we use direct gene transfer to the central nervous system to treat late infantile neuronal ceroid lipofuscinosis to illustrate some of these ethical issues and explore possible solutions to real and apparent conflicts between scientific and ethical considerations. PMID:21446781

Considerations for test design to accommodate energy-budget models in ecotoxicology: a case study for acetone in the pond snail Lymnaea stagnalis.

PubMed

Barsi, Alpar; Jager, Tjalling; Collinet, Marc; Lagadic, Laurent; Ducrot, Virginie

2014-07-01

Toxicokinetic-toxicodynamic (TKTD) modeling offers many advantages in the analysis of ecotoxicity test data. Calibration of TKTD models, however, places different demands on test design compared with classical concentration-response approaches. In the present study, useful complementary information is provided regarding test design for TKTD modeling. A case study is presented for the pond snail Lymnaea stagnalis exposed to the narcotic compound acetone, in which the data on all endpoints were analyzed together using a relatively simple TKTD model called DEBkiss. Furthermore, the influence of the data used for calibration on accuracy and precision of model parameters is discussed. The DEBkiss model described toxic effects on survival, growth, and reproduction over time well, within a single integrated analysis. Regarding the parameter estimates (e.g., no-effect concentration), precision rather than accuracy was affected depending on which data set was used for model calibration. In addition, the present study shows that the intrinsic sensitivity of snails to acetone stays the same across different life stages, including the embryonic stage. In fact, the data on egg development allowed for selection of a unique metabolic mode of action for the toxicant. Practical and theoretical considerations for test design to accommodate TKTD modeling are discussed in the hope that this information will aid other researchers to make the best possible use of their test animals. © 2014 SETAC.

Loads and Structural Dynamics Requirements for Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Schultz, Kenneth P.

2011-01-01

The purpose of this document is to establish requirements relating to the loads and structural dynamics technical discipline for NASA and commercial spaceflight launch vehicle and spacecraft hardware. Requirements are defined for the development of structural design loads and recommendations regarding methodologies and practices for the conduct of load analyses are provided. As such, this document represents an implementation of NASA STD-5002. Requirements are also defined for structural mathematical model development and verification to ensure sufficient accuracy of predicted responses. Finally, requirements for model/data delivery and exchange are specified to facilitate interactions between Launch Vehicle Providers (LVPs), Spacecraft Providers (SCPs), and the NASA Technical Authority (TA) providing insight/oversight and serving in the Independent Verification and Validation role. In addition to the analysis-related requirements described above, a set of requirements are established concerning coupling phenomena or other interaction between structural dynamics and aerodynamic environments or control or propulsion system elements. Such requirements may reasonably be considered structure or control system design criteria, since good engineering practice dictates consideration of and/or elimination of the identified conditions in the development of those subsystems. The requirements are included here, however, to ensure that such considerations are captured in the design space for launch vehicles (LV), spacecraft (SC) and the Launch Abort Vehicle (LAV). The requirements in this document are focused on analyses to be performed to develop data needed to support structural verification. As described in JSC 65828, Structural Design Requirements and Factors of Safety for Spaceflight Hardware, implementation of the structural verification requirements is expected to be described in a Structural Verification Plan (SVP), which should describe the verification of each structural item for the applicable requirements. The requirement for and expected contents of the SVP are defined in JSC 65828. The SVP may also document unique verifications that meet or exceed these requirements with Technical Authority approval.

Tiered Systems of Support: Practical Considerations for School Districts. Issue Focus

ERIC Educational Resources Information Center

MDRC, 2017

2017-01-01

Students learn or progress at their own paces. How can schools make sure that they get the help they need--and only the help they need? Many are turning to multi-tiered systems of support. This brief provides some practical considerations for schools contemplating tiered approaches.

17 CFR 201.411 - Commission consideration of initial decisions by hearing officers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Commission consideration of initial decisions by hearing officers. 201.411 Section 201.411 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Rules of Practice Appeal to the Commission and...

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

Application of Carbon Fibre Truss Technology to the Fuselage Structure of the SKYLON Spaceplane

NASA Astrophysics Data System (ADS)

Varvill, R.; Bond, A.

A reusable SSTO spaceplane employing dual mode airbreathing/rocket engines, such as SKYLON, has a voluminous fuselage in order to accommodate the considerable quantities of hydrogen fuel needed for the ascent. The loading intensity which this fuselage has to withstand is relatively low due to the modest in-flight inertial accelerations coupled with the very low density of liquid hydrogen. Also the requirement to accommo- date considerable temperature differentials between the internal cryogenic tankage and the aerodynamically heated outer skin of the vehicle imposes an additional design constraint that results in an optimum fuselage structural concept very different to conventional aircraft or rocket practice. Several different structural con- cepts exist for the primary loadbearing structure. This paper explores the design possibilities of the various types and explains why an independent near ambient temperature CFRP truss structure was selected for the SKYLON vehicle. The construction of such a truss structure, at a scale not witnessed since the days of the airship, poses a number of manufacturing and design difficulties. In particular the construction of the nodes and their attachment to the struts is considered to be a key issue. This paper describes the current design status of the overall truss geometry, strut construction and manufacturing route, and the final method of assembly. The results of a preliminary strut and node test programme are presented which give confidence that the design targets will eventually be met.

Enacting Pedagogy in Curricula: On the Vital Role of Governance in Medical Education.

PubMed

Casiro, Oscar; Regehr, Glenn

2018-02-01

Managing curricula and curricular change involves both a complex set of decisions and effective enactment of those decisions. The means by which decisions are made, implemented, and monitored constitute the governance of a program. Thus, effective academic governance is critical to effective curriculum delivery. Medical educators and medical education researchers have been invested heavily in issues of educational content, pedagogy, and design. However, relatively little consideration has been paid to the governance processes that ensure fidelity of implementation and ongoing refinements that will bring curricular practices increasingly in line with the pedagogical intent. In this article, the authors reflect on the importance of governance in medical schools and argue that, in an age of rapid advances in knowledge and medical practices, educational renewal will be inhibited if discussions of content and pedagogy are not complemented by consideration of a governance framework capable of enabling change. They explore the unique properties of medical curricula that complicate academic governance, review the definition and properties of good governance, offer mechanisms to evaluate the extent to which governance is operating effectively within a medical program, and put forward a potential research agenda for increasing the collective understanding of effective governance in medical education.

Clinical studies in restorative dentistry: New directions and new demands.

PubMed

Opdam, N J M; Collares, K; Hickel, R; Bayne, S C; Loomans, B A; Cenci, M S; Lynch, C D; Correa, M B; Demarco, F; Schwendicke, F; Wilson, N H F

2018-01-01

Clinical research of restorative materials is confounded by problems of study designs, length of trials, type of information collected, and costs for trials, despite increasing numbers and considerable development of trials during the past 50 years. This opinion paper aims to discuss advantages and disadvantages of different study designs and outcomes for evaluating survival of dental restorations and to make recommendations for future study designs. Advantages and disadvantages of randomized trials, prospective and retrospective longitudinal studies, practice-based, pragmatic and cohort studies are addressed and discussed. The recommendations of the paper are that clinical trials should have rational control groups, include confounders such as patient risk factors in the data and analysis and should use outcome parameters relevant for profession and patients. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Strategies for teaching object-oriented concepts with Java

NASA Astrophysics Data System (ADS)

Sicilia, Miguel-Ángel

2006-03-01

A considerable amount of experiences in teaching object-oriented concepts using the Java language have been reported to date, some of which describe language pitfalls and concrete learning difficulties. In this paper, a number of additional issues that have been experienced as difficult for students to master, along with approaches intended to overcome them, are addressed. Concretely, practical issues regarding associations, interfaces, genericity and exceptions are described. These issues suggest that more emphasis is required on presenting Java programs as derivations of conceptual models, in order to guarantee that a thorough design of the object structure actually precedes implementation issues. In addition, common student misunderstandings about the uses of interfaces and exceptions point to the necessity of introducing both specific design philosophies and also a clear distinction between design-for-reuse and more specific implementation issues.

A Path to Planetary Protection Requirements for Human Exploration: A Literature Review and Systems Engineering Approach

NASA Technical Reports Server (NTRS)

Johnson, James E.; Conley, Cassie; Siegel, Bette

2015-01-01

As systems, technologies, and plans for the human exploration of Mars and other destinations beyond low Earth orbit begin to coalesce, it is imperative that frequent and early consideration is given to how planetary protection practices and policy will be upheld. While the development of formal planetary protection requirements for future human space systems and operations may still be a few years from fruition, guidance to appropriately influence mission and system design will be needed soon to avoid costly design and operational changes. The path to constructing such requirements is a journey that espouses key systems engineering practices of understanding shared goals, objectives and concerns, identifying key stakeholders, and iterating a draft requirement set to gain community consensus. This paper traces through each of these practices, beginning with a literature review of nearly three decades of publications addressing planetary protection concerns with respect to human exploration. Key goals, objectives and concerns, particularly with respect to notional requirements, required studies and research, and technology development needs have been compiled and categorized to provide a current 'state of knowledge'. This information, combined with the identification of key stakeholders in upholding planetary protection concerns for human missions, has yielded a draft requirement set that might feed future iteration among space system designers, exploration scientists, and the mission operations community. Combining the information collected with a proposed forward path will hopefully yield a mutually agreeable set of timely, verifiable, and practical requirements for human space exploration that will uphold international commitment to planetary protection.

Application of principal component analysis (PCA) and improved joint probability distributions to the inverse first-order reliability method (I-FORM) for predicting extreme sea states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckert-Gallup, Aubrey C.; Sallaberry, Cédric J.; Dallman, Ann R.

Environmental contours describing extreme sea states are generated as the input for numerical or physical model simulations as a part of the standard current practice for designing marine structures to survive extreme sea states. These environmental contours are characterized by combinations of significant wave height (H s) and either energy period (T e) or peak period (T p) values calculated for a given recurrence interval using a set of data based on hindcast simulations or buoy observations over a sufficient period of record. The use of the inverse first-order reliability method (I-FORM) is a standard design practice for generating environmentalmore » contours. This paper develops enhanced methodologies for data analysis prior to the application of the I-FORM, including the use of principal component analysis (PCA) to create an uncorrelated representation of the variables under consideration as well as new distribution and parameter fitting techniques. As a result, these modifications better represent the measured data and, therefore, should contribute to the development of more realistic representations of environmental contours of extreme sea states for determining design loads for marine structures.« less

Application of principal component analysis (PCA) and improved joint probability distributions to the inverse first-order reliability method (I-FORM) for predicting extreme sea states

DOE PAGES

Eckert-Gallup, Aubrey C.; Sallaberry, Cédric J.; Dallman, Ann R.; ...

2016-01-06

Environmental contours describing extreme sea states are generated as the input for numerical or physical model simulations as a part of the standard current practice for designing marine structures to survive extreme sea states. These environmental contours are characterized by combinations of significant wave height (H s) and either energy period (T e) or peak period (T p) values calculated for a given recurrence interval using a set of data based on hindcast simulations or buoy observations over a sufficient period of record. The use of the inverse first-order reliability method (I-FORM) is a standard design practice for generating environmentalmore » contours. This paper develops enhanced methodologies for data analysis prior to the application of the I-FORM, including the use of principal component analysis (PCA) to create an uncorrelated representation of the variables under consideration as well as new distribution and parameter fitting techniques. As a result, these modifications better represent the measured data and, therefore, should contribute to the development of more realistic representations of environmental contours of extreme sea states for determining design loads for marine structures.« less

Practical method for evaluating the visibility of moire patterns for CRT design

NASA Astrophysics Data System (ADS)

Shiramatsu, Naoki; Tanigawa, Masashi; Iwata, Shuji

1995-04-01

The high resolution CRT displays used for computer monitor and high performance TV often produce a pattern of bright and dark stripes on the screen called a moire pattern. The elimination of the moire is an important consideration in the CRT design. The objective of this study is to provide a practical method for estimating and evaluating a moire pattern considering the visibility by the human vision. On the basis of the mathematical model of a moire generation, precise value of the period and the intensity of a moire are calculated from the actual data of the electron beam profile and the transmittance distribution of apertures of the shadow mask. The visibility of the moire is evaluated by plotting the calculation results on the contrast-period plane, which consists of visible and invisible moire pattern regions based on experimental results of the psychological tests. Not only fundamental design parameters such as a shadow mask pitch and a scanning line pitch but also details of an electron beam profile such as a distortion or an asymmetry can be examined. In addition to the analysis, the image simulation of a moire using the image memory is also available.

Gender differences among prisoners in drug treatment.

PubMed

Langan, N P; Pelissier, B M

2001-01-01

Nearly all prison-based substance abuse treatment programs have been designed with male prisoners in mind. Administering these male-oriented programs to women prisoners has been the standard correctional practice. Recently, this practice has received considerable criticism. Critics argue that female prisoners have special needs that are not met by programs originally designed for male prisoners. However, most of the empirical support for the existence of such special needs rely on two inappropriate samples: prisoners who are not in treatment and treatment participants who are not incarcerated. Findings from these two different groups may not be generalizable to the population of prisoners in treatment. This paper directly addresses this generalizability problem with an examination of gender differences among 1,326 male and 318 female federal prisoners who were enrolled in a substance abuse treatment program. Women used drugs more frequently, used harder drugs, and used them for different reasons than men. Women also confronted more difficulties than men in areas linked to substance abuse such as educational background, childhood family environment, adult social environment, mental health, and physical health. We find support for the argument that substance abuse treatment programs which were originally designed for men may be inappropriate for the treatment of women.

Practice management: observations, issues, and empirical evidence.

PubMed

Wong, H M; Braithwaite, J

2001-02-01

The primary objective of this study is to provide objective, empirical, evidence-based practice management information. This is a hitherto under-researched area of considerable interest for both the practitioner and educator. A questionnaire eliciting a mix of structured and free text responses was administered to a random sample of 480 practitioners who are members of the American Academy of Periodontology. Potential respondents not in private practice were excluded and the next listed person substituted. The results provide demographic and descriptive information about some of the main issues and problems facing practice managers, central to which are information technology (IT), financial, people management, and marketing. Human resource and marketing management appear to represent the biggest challenges. Periodontists running practices would prefer more information, development, and support in dealing with IT, finance, marketing, and people management. The empirical evidence reported here suggests that although tailored educational programs on key management issues at both undergraduate and postgraduate levels have become ubiquitous, nevertheless some respondents seek further training opportunities. Evidence-based practice management information will be invaluable to the clinician considering strategic and marketing planning, and also for those responsible for the design and conduct of predoctoral and postdoctoral programs.

The field becomes the laboratory? The impact of the contextual digital footprint on the discipline of E/HF.

PubMed

Sharples, Sarah; Houghton, Robert J

2017-02-01

The increasing prevalence of affordable digital sensors, ubiquitous networking and computation puts us at what is only the start of a new era in terms of the volume, coverage and granularity of data that we can access about individuals and workplaces. This paper examines the consequences of harnessing this data deluge for the practice of E/HF. Focusing on what we term the 'contextual digital footprint', the trail of data we produce through interactions with many different digital systems over the course of even a single day, we describe three example scenarios (drawn from health care, distributed work and transportation) and examine how access to data directly drawn in considerable volume from the field will potentially change our application of design and evaluation methods. We conclude with a discussion of issues relevant to ethical and professional practice within this new environment including the increased challenges of respecting anonymity, working with n = all data-sets and the central role of ergonomists in promulgating positive uses of data while retaining a systems-based humanistic approach to work design. Practitioner summary: The paper envisions the impact of new and emerging sources of data about people and workplaces upon future practice in E/HF. We identify practical consequences for ergonomics practice, highlight new areas of professional competence likely to be required and flag both the risks and benefits of adopting a more data-driven approach.

The Effects of Coaching Using a Reflective Framework on Early Childhood Science Teachers' Depth of Reflection and Change in Practice

NASA Astrophysics Data System (ADS)

Bloomquist, Debra L.

This embedded-mixed methods study examined if the use of a reflective framework with guiding prompts could support early childhood science teachers in improving their reflective practice and subsequently changing their pedagogy. It further investigated whether type of cognitive coaching group, individual or collaborative, impacted teacher depth of reflection and change in practice. Data included teacher reflections that were rated using the Level of Reflection-On-Action Assessment, reflective codes and inductive themes, as well as videos of participants lessons coded using the SCIIENCE instrument. Findings demonstrated that through guided reflection, teachers developed reflective thinking skills, and through this reflection became more critical and began to improve their pedagogical practice. Further findings supported that collaborative cognitive coaching may not be the most effective professional development for all teachers; as some teachers in the study were found to have difficulty improving their reflectivity and thus their teaching practice. Based on these findings it is recommended that coaches and designers of professional development continue to use reflective frameworks with guiding prompts to support teachers in the reflective process, but take into consideration that coaching may need to be differentiated for the various reflective levels demonstrated by teachers. Future studies will be needed to establish why some teachers have difficulty with the reflective process and how coaches or designers of professional development can further assist these teachers in becoming more critical reflectors.

Translating Research on Healthy Lifestyles for Children: Meeting the Needs of Diverse Populations

PubMed Central

Kennedy, Christine; Floriani, Victoria

2008-01-01

Synopsis This paper provides two examples of approaches nursing can take to reach diverse populations of children and their families to enhance health lifestyles. First a descriptive summary of a brief after-school intervention program aimed at influencing 8 and 9 year-old children’s media habits and the prevention of negative health behaviors will be presented. Design consideration for translating health lifestyles research findings into a Nurse managed inner city primary care practice will be reviewed in the 2nd example. PMID:18674672

The physics of proton therapy.

PubMed

Newhauser, Wayne D; Zhang, Rui

2015-04-21

The physics of proton therapy has advanced considerably since it was proposed in 1946. Today analytical equations and numerical simulation methods are available to predict and characterize many aspects of proton therapy. This article reviews the basic aspects of the physics of proton therapy, including proton interaction mechanisms, proton transport calculations, the determination of dose from therapeutic and stray radiations, and shielding design. The article discusses underlying processes as well as selected practical experimental and theoretical methods. We conclude by briefly speculating on possible future areas of research of relevance to the physics of proton therapy.

The physics of proton therapy

PubMed Central

Newhauser, Wayne D; Zhang, Rui

2015-01-01

The physics of proton therapy has advanced considerably since it was proposed in 1946. Today analytical equations and numerical simulation methods are available to predict and characterize many aspects of proton therapy. This article reviews the basic aspects of the physics of proton therapy, including proton interaction mechanisms, proton transport calculations, the determination of dose from therapeutic and stray radiations, and shielding design. The article discusses underlying processes as well as selected practical experimental and theoretical methods. We conclude by briefly speculating on possible future areas of research of relevance to the physics of proton therapy. PMID:25803097

Basics of compounding: considerations for implementing United States pharmacopeia chapter 797 pharmaceutical compounding-sterile preparations, part 16: suggested standard operating procedures.

PubMed

Okeke, Claudia C; Allen, Loyd V

2009-01-01

The standard operating procedures suggested in this article are presented to compounding pharmacies to ensure the quality of the environment in which a CSP is prepared. Since United States Pharmacopeia Chapter 797 provides minimum standards, each facility should aim for best practice gold standard. The standard operating procedures should be tailored to meet the expectations and design of each facility. Compounding personnel are expected to know and understand each standard operating procedure to allow for complete execution of the procedures.

A social-ecological analysis of the self-determination literature.

PubMed

Shogren, Karrie A

2013-12-01

This paper uses a social-ecological lens to examine self-determination research, attempting to organize what is known (and unknown) about contextual factors that have the potential to impact the development and expression of self-determined behavior in people with disabilities across multiple ecological systems. Identifying and categorizing the contextual factors that researchers suggest influence self-determination have the potential to allow for the development of a framework that promotes systematic consideration of contextual factors when designing, implementing, and evaluating supports to promote self-determination. Directions for future research and practice are discussed.

T700 power turbine rotor multiplane/multispeed balancing demonstration

NASA Technical Reports Server (NTRS)

Burgess, G.; Rio, R.

1979-01-01

Research was conducted to demonstrate the ability of influence coefficient based multispeed balancing to control rotor vibration through bending criticals. Rotor dynamic analyses were conducted of the General Electric T700 power turbine rotor. The information was used to generate expected rotor behavior for optimal considerations in designing a balance rig and a balance technique. The rotor was successfully balanced 9500 rpm. Uncontrollable coupling behavior prevented observations through the 16,000 rpm service speed. The balance technique is practical and with additional refinement it can meet production standards.

Highly Productive Tools For Turning And Milling

NASA Astrophysics Data System (ADS)

Vasilko, Karol

2015-12-01

Beside cutting speed, shift is another important parameter of machining. Its considerable influence is shown mainly in the workpiece machined surface microgeometry. In practice, mainly its combination with the radius of cutting tool tip rounding is used. Options to further increase machining productivity and machined surface quality are hidden in this approach. The paper presents variations of the design of productive cutting tools for lathe work and milling on the base of the use of the laws of the relationship among the highest reached uneveness of machined surface, tool tip radius and shift.

A high gain antenna system for airborne satellite communication applications

NASA Technical Reports Server (NTRS)

Maritan, M.; Borgford, M.

1990-01-01

A high gain antenna for commercial aviation satellites communication is discussed. Electromagnetic and practical design considerations as well as candidate systems implementation are presented. An evaluation of these implementation schemes is given, resulting in the selection of a simple top mounted aerodynamic phased array antenna with a remotely located beam steering unit. This concept has been developed into a popular product known as the Canadian Marconi Company CMA-2100. A description of the technical details is followed by a summary of results from the first production antennas.

Implementation of RF Circuitry for Real-Time Digital Beam-Forming SAR Calibration Schemes

NASA Technical Reports Server (NTRS)

Horst, Stephen J.; Hoffman, James P.; Perkovic-Martin, Dragana; Shaffer, Scott; Thrivikraman, Tushar; Yates, Phil; Veilleux, Louise

2012-01-01

The SweepSAR architecture for space-borne remote sensing applications is an enabling technology for reducing the temporal baseline of repeat-pass interferometers while maintaining near-global coverage. As part of this architecture, real-time digital beam-forming would be performed on the radar return signals across multiple channels. Preserving the accuracy of the combined return data requires real-time calibration of the transmit and receive RF paths on each channel. This paper covers several of the design considerations necessary to produce a practical implementation of this concept.

Selecting optimal structure of burners for tubular cylindrical furnaces by the mathematical experiment planning method

NASA Astrophysics Data System (ADS)

Katin, Viktor; Kosygin, Vladimir; Akhtiamov, Midkhat

2017-10-01

This paper substantiates the method of mathematical planning for experimental research in the process of selecting the most efficient types of burning devices for tubular refinery furnaces of vertical-cylindrical design. This paper provides detailed consideration of an experimental plan of a 4×4 Latin square type when studying the impact of three factors with four levels of variance. On the basis of the experimental research we have developed practical recommendations on the employment of optimal burners for two-step fuel combustion.

Aspheric design for manufacturability

NASA Astrophysics Data System (ADS)

Kreischer, Cody B.

2007-05-01

The experienced lens designer is well aware of the potential advantages aspherics can afford. Within the last few years, machines specifically designed for the CNC machining and polishing of glass aspheres have become commercially available through several manufacturers. This has brought down manufacturing cost to the point that designs incorporating aspheres can be used to reduce system cost compared to all spherical designs. (That is aspheres are no longer used just to save space and weight at the expense of cost.) Not all aspheres are equally manufacturable, however. Arbitrary choices at the beginning of a design can have major impact on manufacturing cost and limit final "as built" performance. This paper considers factors in designing ground and polished (as opposed to molded) glass aspheres which may not be obvious to even the experienced lens designer accustomed to using spherical surfaces or who has dealt with diamond turned aspheres. Factors considered include the surface shape, how the shape is specified, how the surface is to be tested and how it is toleranced. Emphasis will be placed on medium priced components where practical considerations are important.

Analysis and design of planar waveguide elements for use in filters and sensors

NASA Astrophysics Data System (ADS)

Chen, Guangzhou

In this dissertation we present both theoretical analysis and practical design considerations for planar optical waveguide devices. The analysis takes into account both transverse dimensions of the waveguides and is based on supermode theory combined with the resonance method for the determination of the propagation constants and field profiles of the supermodes. An improved accuracy has been achieved by including corrections due to the fields in the corner regions of the waveguides using perturbation theory. We analyze in detail two particular devices, an optical filter/combiner and an optical sensor. An optical wavelength filter/combiner is a common element in an integrated optical circuit. A new "bend free" filter/combiner is proposed and analyzed. The new wavelength filter consists of only straight parallel channels, which considerably simplify both the analysis and fabrication of the device. We show in detail how the operation of the device depends upon each of the design parameters. The intrinsic power loss in the proposed filter/combiner is minimized. The optical sensor is another important device and the sensitivity of measurement is an important issue in its design. Two operating mechanisms used in prior optical sensors are evanescent wave sensing or surface plasmon excitation. In this dissertation, we present a sensor with a directional coupler structure in which a measurand to be detected is interfaced with one side of the cladding. The analysis shows that it is possible to make a high resolution device by adjusting the design parameters. The dimensions and materials used in an optimized design are presented.

Ethics in Pharmacy Curriculum for Undergraduate Pharmacy Students: A Needs Assessment Study.

PubMed

Salari, Pooneh; Abdollahi, Mohammad

2017-01-01

Recent advances in pharmacy practice have created serious ethical challenges for the pharmacists. Pursuing a new philosophy of practice is required to overcome these challenges and optimize the standard of care. In this regard, the current ethics guideline in the Pharmacy curriculum used in Tehran University of Medical Sciences, does not provide a fully comprehensive understanding of the issue. Therefore, the aim of the present study was to revise the current curriculum based on a needs assessment study. In this study, a two-part questionnaire was presented to pharmacists to obtain their views on the importance of topics in their daily routine practice. Part one of the questionnaire consisted of demographic data and part two of 23 topics in pharmacy ethics. Out of a total of 200 questionnaires, 158 questionnaires were returned. We reached consensus on 24 topics, of which 8 topics gained a score of higher than 4 (the highest score was considered to be 5) and the rest obtained a score of 3 and higher. The highest score pertained to the pharmacists' relationship with patients, awareness of the rules and regulations, and medication error. Based on the results, a revised curriculum was designed for ethics in pharmacy. It seems that the designed curriculum is context-based and will develop appropriate educational material regarding pharmacists' requirements in daily practice. Consideration of interactive methods for teaching the curriculum is highly recommended.

The integration of behavioral health interventions in children's health care: services, science, and suggestions.

PubMed

Kolko, David J; Perrin, Ellen

2014-01-01

Because the integration of mental or behavioral health services in pediatric primary care is a national priority, a description and evaluation of the interventions applied in the healthcare setting is warranted. This article examines several intervention research studies based on alternative models for delivering behavioral health care in conjunction with comprehensive pediatric care. This review describes the diverse methods applied to different clinical problems, such as brief mental health skills, clinical guidelines, and evidence-based practices, and the empirical outcomes of this research literature. Next, several key treatment considerations are discussed to maximize the efficiency and effectiveness of these interventions. Some practical suggestions for overcoming key service barriers are provided to enhance the capacity of the practice to deliver behavioral health care. There is moderate empirical support for the feasibility, acceptability, and clinical utility of these interventions for treating internalizing and externalizing behavior problems. Practical strategies to extend this work and address methodological limitations are provided that draw upon recent frameworks designed to simplify the treatment enterprise (e.g., common elements). Pediatric primary care has become an important venue for providing mental health services to children and adolescents due, in part, to its many desirable features (e.g., no stigma, local setting, familiar providers). Further adaptation of existing delivery models may promote the delivery of effective integrated interventions with primary care providers as partners designed to address mental health problems in pediatric healthcare.

The holistic worldview in action: evolution of holistic nurses certification programs.

PubMed

Erickson, Helen Lorraine; Erickson, Margaret Elizabeth; Sandor, M Kay; Brekke, Mary E

2013-12-01

The American Holistic Nurses Credentialing Corporation (AHNCC), the only national credentialing body for holistic nurses, has a responsibility to offer valid, reliable, and rigorous certification examinations and to grow and evolve as indicated by social and professional changes. This article describes four major changes in the work of AHNCC since 2004: a detection of an evolution in the domain of holistic nursing through review of the literature; clarification and specification of levels of practice by educational level; development of the nurse coach role in nursing, designed within the precepts of holistic nursing; and AHNCC's response to the social paradigm shift for health care, and nursing's advanced practice registered nurse consensus model. Each of these is discussed in detail describing the circumstances that perpetuated AHNCC's consideration and the actions taken by AHNCC.

There Are Thousands of Apps for That: Navigating Mobile Technology for Nutrition Education and Behavior.

PubMed

Hingle, Melanie; Patrick, Heather

2016-03-01

Mobile health (mHealth) is an emerging field devoted to the use of mobile and wireless devices to affect health outcomes, health care services, and health research. Despite great promise, little research has examined its effectiveness. It is the authors' view that the full potential of mHealth has yet to be realized in research and practice. This Perspective article explores when and for whom mHealth approaches are effective, strengths and limitations of commercially and academically generated apps, research design considerations, and public-private partnerships. These topics have implications for researchers and practitioners who wish to advance the science and practice of mHealth. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Observations from Ground Zero at the World Trade Center in New York City, Part II: Theoretical and clinical considerations.

PubMed

Acosta, Judith K; Levenson, Richard L

2002-01-01

Part I of this series discussed our observations of Ground Zero of the World Trade Center (WTC) immediately after the attack on September 11, 2001, as well as the stress-response of police officers on site. This paper offers a variety of clinical techniques for emergency mental health practitioners and first responders for use with victims of critical incidents. The suggested interventions are based on the theory and clinical practice of Emergency Medical Hypnosis, Neuro-Linguistic Programming, and Ericksonian Psychotherapy. Specific examples of how they were applied with police personnel following the World Trade Center attack are provided along with specific clinical guidelines. These interventions are designed to augment and enhance standard CISM, mental health, and medical practice in the field.

Free-form Airfoil Shape Optimization Under Uncertainty Using Maximum Expected Value and Second-order Second-moment Strategies

NASA Technical Reports Server (NTRS)

Huyse, Luc; Bushnell, Dennis M. (Technical Monitor)

2001-01-01

Free-form shape optimization of airfoils poses unexpected difficulties. Practical experience has indicated that a deterministic optimization for discrete operating conditions can result in dramatically inferior performance when the actual operating conditions are different from the - somewhat arbitrary - design values used for the optimization. Extensions to multi-point optimization have proven unable to adequately remedy this problem of "localized optimization" near the sampled operating conditions. This paper presents an intrinsically statistical approach and demonstrates how the shortcomings of multi-point optimization with respect to "localized optimization" can be overcome. The practical examples also reveal how the relative likelihood of each of the operating conditions is automatically taken into consideration during the optimization process. This is a key advantage over the use of multipoint methods.

Current practices in treatment of female genital fistula: a cross sectional study.

PubMed

Arrowsmith, Steven D; Ruminjo, Joseph; Landry, Evelyn G

2010-11-10

Maternal outcomes in most countries of the developed world are good. However, in many developing/resource-poor countries, maternal outcomes are bleaker: Every year, more than 500,000 women die in childbirth, mostly in resource-poor countries. Those who survive often suffer from severe and long-term morbidities. One of the most devastating injuries is obstetric fistula, occurring most often in south Asia and sub-Saharan Africa. Fistula treatment and care are available in many countries across Africa and Asia, but there is a lack of reliable data around clinical factors associated with the success of fistula repair surgery. Most published research has been retrospective. While these studies have provided useful information about the care and treatment of fistula, they are limited by the design. This study was designed to identify practices in care that could lead to the design of prospective and randomized controlled trials. Self-administered questionnaires were completed by 40 surgeons known to provide fistula treatment services in Africa and Asia at private and government hospitals. The questionnaire was divided into three parts to address the following issues: prophylactic use of antibiotics before, during, and after fistula surgery; urethral catheter management; and management practices for patients with urinary incontinence following fistula repair. The results provide a glimpse into current practices in fistula treatment and care across a wide swath of geographic, economic, and organizational considerations. There is consensus in treatment in some areas (routine use of prophylactic antibiotics, limited bed rest until the catheter is removed, nonsurgical treatment for postsurgical incontinence), while there are wide variations in practice in other areas (duration of catheter use, surgical treatments for postsurgical incontinence). These findings are based on a small sample and do not allow for recommending changes in clinical care, but they point to issues for possible clinical trial research that would contribute to more efficient and effective fistula care. The findings from the survey allowed us to consider clinical practices most influential in the cost, efficacy, and safety of fistula treatment. These considerations led us to formulate recommendations for eight randomized controlled trials on the following subjects: 1) Efficacy/safety of short-term catheterization; 2) efficacy of surgical and nonsurgical therapies for urinary incontinence; 3) technical measures during fistula repair to reduce the incidence of post-surgery incontinence; 4) identification of predictive factors for "incurable fistula"; 5) usefulness of urodynamic studies in the management of urinary incontinence; 6) incidence and significance of multi-drug resistant bacteria in the fistula population; 7) primary management of small, new fistulas by catheter drainage; and 8) antibiotic prophylaxis in fistula repair.

Guidelines and Capabilities for Designing Human Missions

NASA Technical Reports Server (NTRS)

2002-01-01

The human element is likely the most complex and difficult one of mission design; it significantly influences every aspect of mission planning, from the basic parameters like duration to the more complex tradeoffs between mass, volume, power, risk, and cost. For engineers who rely on precise specifications in data books and other such technical references, dealing with the uncertainty and the variability of designing for human beings can be frustrating. When designing for the human element, questions arise more often than definitive answers. Nonetheless, we do not doubt that the most captivating discoveries in future space missions will necessitate human explorers. These guidelines and capabilities are meant to identify the points of intersection between humans and mission considerations such as architecture, vehicle design, technologies, operations, and science requirements. We seek to provide clear, top-level guidelines for human-related exploration studies and technology research that address common questions and requirements. As a result, we hope that ongoing mission trade studies consider common, standard, and practical criteria for human interfaces.

Guidelines and Capabilities for Designing Human Missions

NASA Astrophysics Data System (ADS)

2002-03-01

The human element is likely the most complex and difficult one of mission design; it significantly influences every aspect of mission planning, from the basic parameters like duration to the more complex tradeoffs between mass, volume, power, risk, and cost. For engineers who rely on precise specifications in data books and other such technical references, dealing with the uncertainty and the variability of designing for human beings can be frustrating. When designing for the human element, questions arise more often than definitive answers. Nonetheless, we do not doubt that the most captivating discoveries in future space missions will necessitate human explorers. These guidelines and capabilities are meant to identify the points of intersection between humans and mission considerations such as architecture, vehicle design, technologies, operations, and science requirements. We seek to provide clear, top-level guidelines for human-related exploration studies and technology research that address common questions and requirements. As a result, we hope that ongoing mission trade studies consider common, standard, and practical criteria for human interfaces.

Evaluating the Process of Generating a Clinical Trial Protocol

PubMed Central

Franciosi, Lui G.; Butterfield, Noam N.; MacLeod, Bernard A.

2002-01-01

The research protocol is the principal document in the conduct of a clinical trial. Its generation requires knowledge about the research problem, the potential experimental confounders, and the relevant Good Clinical Practices for conducting the trial. However, such information is not always available to authors during the writing process. A checklist of over 80 items has been developed to better understand the considerations made by authors in generating a protocol. It is based on the most cited requirements for designing and implementing the randomised controlled trial. Items are categorised according to the trial's research question, experimental design, statistics, ethics, and standard operating procedures. This quality assessment tool evaluates the extent that a generated protocol deviates from the best-planned clinical trial.

Contemporary research on parenting: conceptual, methodological, and translational issues.

PubMed

Power, Thomas G; Sleddens, Ester F C; Berge, Jerica; Connell, Lauren; Govig, Bert; Hennessy, Erin; Liggett, Leanne; Mallan, Kimberley; Santa Maria, Diane; Odoms-Young, Angela; St George, Sara M

2013-08-01

Researchers over the last decade have documented the association between general parenting style and numerous factors related to childhood obesity (e.g., children's eating behaviors, physical activity, and weight status). Many recent childhood obesity prevention programs are family focused and designed to modify parenting behaviors thought to contribute to childhood obesity risk. This article presents a brief consideration of conceptual, methodological, and translational issues that can inform future research on the role of parenting in childhood obesity. They include: (1) General versus domain specific parenting styles and practices; (2) the role of ethnicity and culture; (3) assessing bidirectional influences; (4) broadening assessments beyond the immediate family; (5) novel approaches to parenting measurement; and (6) designing effective interventions. Numerous directions for future research are offered.

Preliminary system design study for a digital fly-by-wire flight control system for an F-8C aircraft

NASA Technical Reports Server (NTRS)

Seacord, C. L.; Vaughn, D. K.

1976-01-01

The design of a fly-by-wire control system having a mission failure probability of less than one millionth failures per flight hour is examined. Emphasis was placed on developing actuator configurations that would improve the system performance, and consideration of the practical aspects of sensor/computer and computer/actuator interface implementation. Five basic configurations were defined as appropriate candidates for the F-8C research aircraft. Options on the basic configurations were included to cover variations in flight sensors, redundancy levels, data transmission techniques, processor input/output methods, and servo actuator arrangements. The study results can be applied to fly by wire systems for transport aircraft in general and the space shuttle.

Grower networks support adoption of innovations in pollination management: The roles of social learning, technical learning, and personal experience.

PubMed

Garbach, Kelly; Morgan, Geoffrey P

2017-12-15

Management decisions underpinning availability of ecosystem services and the organisms that provide them in agroecosystems, such as pollinators and pollination services, have emerged as a foremost consideration for both conservation and crop production goals. There is growing evidence that innovative management practices can support diverse pollinators and increase crop pollination. However, there is also considerable debate regarding factors that support adoption of these innovative practices. This study investigated pollination management practices and related knowledge systems in a major crop producing region of southwest Michigan in the United States, where 367 growers were surveyed to evaluate adoption of three innovative practices that are at various stages of adoption. The goals of this quantitative, social survey were to investigate grower experience with concerns and benefits associated with each practice, as well as the influence of grower networks, which are comprised of contacts that reflect potential pathways for social and technical learning. The results demonstrated that 17% of growers adopted combinations of bees (e.g. honey bees, Apis mellifera, with other species), representing an innovation in use by early adopters; 49% of growers adopted flowering cover crops, an innovation in use by the early majority 55% of growers retained permanent habitat for pollinators, an innovation in use by the late majority. Not all growers adopted innovative practices. We found that growers' personal experience with potential benefits and concerns related to the management practices had significant positive and negative relationships, respectively, with adoption of all three innovations. The influence of these communication links likely has different levels of importance, depending on the stage of the adoption that a practice is experiencing in the agricultural community. Social learning was positively associated with adopting the use of combinations of bees, highlighting the potentially critical roles of peer-to-peer networks and social learning in supporting early stages of adoption of innovations. Engaging with grower networks and understanding grower experience with benefits and concerns associated with innovative practices is needed to inform outreach, extension, and policy efforts designed to stimulate management innovations in agroecosystems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Translating research into practice through user-centered design: An application for osteoarthritis healthcare planning.

PubMed

Carr, Eloise Cj; Babione, Julie N; Marshall, Deborah

2017-08-01

To identify the needs and requirements of the end users, to inform the development of a user-interface to translate an existing evidence-based decision support tool into a practical and usable interface for health service planning for osteoarthritis (OA) care. We used a user-centered design (UCD) approach that emphasized the role of the end-users and is well-suited to knowledge translation (KT). The first phase used a needs assessment focus group (n=8) and interviews (n=5) with target users (health care planners) within a provincial health care organization. The second phase used a participatory design approach, with two small group sessions (n=6) to explore workflow, thought processes, and needs of intended users. The needs assessment identified five design recommendations: ensuring the user-interface supports the target user group, allowing for user-directed data explorations, input parameter flexibility, clear presentation, and provision of relevant definitions. The second phase identified workflow insights from a proposed scenario. Graphs, the need for a visual overview of the data, and interactivity were key considerations to aid in meaningful use of the model and knowledge translation. A UCD approach is well suited to identify health care planners' requirements when using a decision support tool to improve health service planning and management of OA. We believe this is one of the first applications to be used in planning for health service delivery. We identified specific design recommendations that will increase user acceptability and uptake of the user-interface and underlying decision support tool in practice. Our approach demonstrated how UCD can be used to enable knowledge translation. Copyright © 2017 Elsevier B.V. All rights reserved.

Implementation of a mandatory checklist of protocols and objectives improves compliance with a wide range of evidence-based intensive care unit practices.

PubMed

Byrnes, Matthew C; Schuerer, Douglas J E; Schallom, Marilyn E; Sona, Carrie S; Mazuski, John E; Taylor, Beth E; McKenzie, Wendi; Thomas, James M; Emerson, Jeffrey S; Nemeth, Jennifer L; Bailey, Ruth A; Boyle, Walter A; Buchman, Timothy G; Coopersmith, Craig M

2009-10-01

To determine a) if a checklist covering a diverse group of intensive care unit protocols and objectives would improve clinician consideration of these domains and b) if improved consideration would change practice patterns. Pre- and post observational study. A 24-bed surgical/burn/trauma intensive care unit in a teaching hospital. A total of 1399 patients admitted between June 2006 and May 2007. The first component of the study evaluated whether mandating verbal review of a checklist covering 14 intensive care unit best practices altered verbal consideration of these domains. Evaluation was performed using real-time bedside audits on morning rounds. The second component evaluated whether the checklist altered implementation of these domains by changing practice patterns. Evaluation was performed by analyzing data from the Project IMPACT database after patients left the intensive care unit. Verbal consideration of evaluable domains improved from 90.9% (530/583) to 99.7% (669/671, p < .0001) after verbal review of the checklist was mandated. Bedside consideration improved on the use of deep venous thrombosis prophylaxis (p < .05), stress ulcer prophylaxis (p < .01), oral care for ventilated patients (p < 0.01), electrolyte repletion (p < .01), initiation of physical therapy (p < .05), and documentation of restraint orders (p < .0001). Mandatory verbal review of the checklist resulted in a greater than two-fold increase in transferring patients out of the intensive care unit on telemetry (16% vs. 35%, p < .0001) and initiation of physical therapy (28% vs. 42%, p < .0001) compared with baseline practice. A mandatory verbal review of a checklist covering a wide range of objectives and goals at each patient's bedside is an effective method to improve both consideration and implementation of intensive care unit best practices. A bedside checklist is a simple, cost-effective method to prevent errors of omission in basic domains of intensive care unit management that might otherwise be forgotten in the setting of more urgent care requirements.

Design-based online teacher professional development to introduce integration of STEM in Pakistan

NASA Astrophysics Data System (ADS)

Anwar, Tasneem

In today's global society where innovations spread rapidly, the escalating focus on science, technology, engineering and mathematics (STEM) has quickly intensified in the United States, East Asia and much of Western Europe. Our ever-changing, increasingly global society faces many multidisciplinary problems, and many of the solutions require the integration of multiple science, technology, engineering, and mathematics (STEM) concepts. Thus, there is a critical need to explore the integration of STEM subjects in international education contexts. This dissertation study examined the exploration of integration of STEM in the unique context of Pakistan. This study used three-phase design-based methodological framework derived from McKenney and Reeves (2012) to explore the development of a STEM focused online teacher professional development (oTPD-STEM) and to identify the design features that facilitate teacher learning. The oTPD-STEM program was designed to facilitate eight Pakistani elementary school teachers' exploration of the new idea of STEM integration through both practical and theoretical considerations. This design-based study employed inductive analysis (Strauss and Corbin, 1998) to analyze multiple data sources of interviews, STEM perception responses, reflective learning team conversations, pre-post surveys and artifacts produced in oTPD-STEM. Findings of this study are presented as: (1) design-based decisions for oTPD-STEM, and (2) evolution in understanding of STEM by sharing participant teachers' STEM model for Pakistani context. This study advocates for the potential of school-wide oTPD for interdisciplinary collaboration through support for learner-centered practices.

Double degree master program: Optical Design

NASA Astrophysics Data System (ADS)

Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

2015-10-01

Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

Design-Filter Selection for H2 Control of Microgravity Isolation Systems: A Single-Degree-of-Freedom Case Study

NASA Technical Reports Server (NTRS)

Hampton, R. David; Whorton, Mark S.

2000-01-01

Many microgravity space-science experiments require active vibration isolation, to attain suitably low levels of background acceleration for useful experimental results. The design of state-space controllers by optimal control methods requires judicious choices of frequency-weighting design filters. Kinematic coupling among states greatly clouds designer intuition in the choices of these filters, and the masking effects of the state observations cloud the process further. Recent research into the practical application of H2 synthesis methods to such problems, indicates that certain steps can lead to state frequency-weighting design-filter choices with substantially improved promise of usefulness, even in the face of these difficulties. In choosing these filters on the states, one considers their relationships to corresponding design filters on appropriate pseudo-sensitivity- and pseudo-complementary-sensitivity functions. This paper investigates the application of these considerations to a single-degree-of-freedom microgravity vibration-isolation test case. Significant observations that were noted during the design process are presented. along with explanations based on the existent theory for such problems.

The CanPain SCI Clinical Practice Guidelines for Rehabilitation Management of Neuropathic Pain after Spinal Cord: screening and diagnosis recommendations.

PubMed

Mehta, S; Guy, S D; Bryce, T N; Craven, B C; Finnerup, N B; Hitzig, S L; Orenczuk, S; Siddall, P J; Widerström-Noga, E; Casalino, A; Côté, I; Harvey, D; Kras-Dupuis, A; Lau, B; Middleton, J W; Moulin, D E; O'Connell, C; Parrent, A G; Potter, P; Short, C; Teasell, R; Townson, A; Truchon, C; Wolfe, D; Bradbury, C L; Loh, E

2016-08-01

Clinical practice guidelines. To develop the first Canadian clinical practice guidelines for screening and diagnosis of neuropathic pain in people with spinal cord injury (SCI). The guidelines are relevant for inpatient and outpatient SCI rehabilitation settings in Canada. The CanPainSCI Working Group reviewed evidence to address clinical questions regarding screening and diagnosis of neuropathic pain after SCI. A consensus process was followed to achieve agreement on recommendations and clinical considerations. Twelve recommendations, based on expert consensus, were developed for the screening and diagnosis of neuropathic pain after SCI. The recommendations address methods for assessment, documentation tools, team member accountability, frequency of screening and considerations for diagnostic investigation. Important clinical considerations accompany each recommendation. The expert Working Group developed recommendations for the screening and diagnosis of neuropathic pain after SCI that should be used to inform practice.

Surrogate assisted multidisciplinary design optimization for an all-electric GEO satellite

NASA Astrophysics Data System (ADS)

Shi, Renhe; Liu, Li; Long, Teng; Liu, Jian; Yuan, Bin

2017-09-01

State-of-the-art all-electric geostationary earth orbit (GEO) satellites use electric thrusters to execute all propulsive duties, which significantly differ from the traditional all-chemical ones in orbit-raising, station-keeping, radiation damage protection, and power budget, etc. Design optimization task of an all-electric GEO satellite is therefore a complex multidisciplinary design optimization (MDO) problem involving unique design considerations. However, solving the all-electric GEO satellite MDO problem faces big challenges in disciplinary modeling techniques and efficient optimization strategy. To address these challenges, we presents a surrogate assisted MDO framework consisting of several modules, i.e., MDO problem definition, multidisciplinary modeling, multidisciplinary analysis (MDA), and surrogate assisted optimizer. Based on the proposed framework, the all-electric GEO satellite MDO problem is formulated to minimize the total mass of the satellite system under a number of practical constraints. Then considerable efforts are spent on multidisciplinary modeling involving geosynchronous transfer, GEO station-keeping, power, thermal control, attitude control, and structure disciplines. Since orbit dynamics models and finite element structural model are computationally expensive, an adaptive response surface surrogate based optimizer is incorporated in the proposed framework to solve the satellite MDO problem with moderate computational cost, where a response surface surrogate is gradually refined to represent the computationally expensive MDA process. After optimization, the total mass of the studied GEO satellite is decreased by 185.3 kg (i.e., 7.3% of the total mass). Finally, the optimal design is further discussed to demonstrate the effectiveness of our proposed framework to cope with the all-electric GEO satellite system design optimization problems. This proposed surrogate assisted MDO framework can also provide valuable references for other all-electric spacecraft system design.

Assessment and d/Deaf and Hard of Hearing Multilingual Learners: Considerations and Promising Practices

ERIC Educational Resources Information Center

Pizzo, Lianna; Chilvers, Amanda

2016-01-01

The authors address considerations and promising practices relating to assessment of d/Deaf and Hard of Hearing Multilingual Learners. DMLs' unique culture(s), language(s), and learning needs must be considered when assessments of this population are being planned, conducted, and interpreted. The authors address theory and research on (a) general…

Practical, Ethical, and Legal Considerations regarding Videocounseling in College and University Counseling Centers: A Response to Quarto's "Influencing College Students' Perceptions of Videocounseling"

ERIC Educational Resources Information Center

Menzano, Silvestro; Goodwin, Alan; Rockett, Geraldine; Morris, Kathy

2011-01-01

There are numerous factors and concerns to take into consideration when implementing new technology into a counseling center's practice. These factors--informed consent, confidentiality, record-keeping, licensure, technical issues, eligibility, emergencies, and staff perceptions--are legitimate and must be addressed and resolved before…

Well-Being and Happiness: Critical, Practical and Philosophical Considerations for Policies and Practices in Lifelong Learning

ERIC Educational Resources Information Center

Gouthro, Patricia A.

2010-01-01

This paper argues that while the Inquiry into the Future of Lifelong Learning that was commissioned by NIACE makes some helpful recommendations for broadening the scope of lifelong learning to include considerations around well-being and happiness, the reports do not provide a sufficiently critical or philosophical analysis of the challenges…

Considerations for Explosively Driven Conical Shock Tube Design: Computations and Experiments

DTIC Science & Technology

2017-02-16

ARL-TR-7953 ● FEB 2017 US Army Research Laboratory Considerations for Explosively Driven Conical Shock Tube Design : Computations...The findings in this report are not to be construed as an official Department of the Army position unless so designated by other authorized...Considerations for Explosively Driven Conical Shock Tube Designs : Computations and Experiments by Joel B Stewart Weapons and Materials Research Directorate

Early community-based family practice elective positively influences medical students' career considerations--a pre-post-comparison.

PubMed

Deutsch, Tobias; Hönigschmid, Petra; Frese, Thomas; Sandholzer, Hagen

2013-02-21

Demographic change and recruitment problems in family practice are increasingly threatening an adequate primary care workforce in many countries. Thus, it is important to attract young physicians to the field. The purpose of the present study was to examine the effect of an early community-based 28-h family practice elective with one-to-one mentoring on medical students' consideration of family practice as a career option, their interest in working office-based, and several perceptions with regard to specific aspects of a family physician's work. First- and second-year medical students completed questionnaires before and after a short community-based family practice elective, consisting of a preparatory course and a community-based practical experience with one-to-one mentoring by trained family physicians. We found a significantly higher rate of students favoring family practice as a career option after the elective (32.7% vs. 26.0%, p = 0.039). Furthermore, the ranking of family practice among other considered career options improved (p = 0.002). Considerations to work office-based in the future did not change significantly. Perceptions regarding a family physician's job changed positively with regard to the possibility of long-term doctor-patient relationships and treatment of complex disease patterns. The majority of the students described identification with the respective family physician tutor as a professional role model and an increased interest in the specialty. Our results indicate that a short community-based family practice elective early in medical education may positively influence medical students' considerations of a career in family practice. Furthermore, perceptions regarding the specialty with significant impact on its attractiveness may be positively adjusted. Further research is needed to evaluate the influence of different components of a family practice curriculum on the de facto career decisions of young physicians after graduation.

The role of health system governance in strengthening the rural health insurance system in China.

PubMed

Yuan, Beibei; Jian, Weiyan; He, Li; Wang, Bingyu; Balabanova, Dina

2017-05-23

Systems of governance play a key role in the operation and performance of health systems. In the past six decades, China has made great advances in strengthening its health system, most notably in establishing a health insurance system that enables residents of rural areas to achieve access to essential services. Although there have been several studies of rural health insurance schemes, these have focused on coverage and service utilization, while much less attention has been given to the role of governance in designing and implementing these schemes. Information from publications and policy documents relevant to the development of two rural health insurance policies in China was obtained, analysed, and synthesise. 92 documents on CMS (Cooperative Medical Scheme) or NCMS (New Rural Cooperative Medical Scheme) from four databases searched were included. Data extraction and synthesis of the information were guided by a framework that drew on that developed by the WHO to describe health system governance and leadership. We identified a series of governance practices that were supportive of progress, including the prioritisation by the central government of health system development and certain health policies within overall national development; strong government commitment combined with a hierarchal administrative system; clear policy goals coupled with the ability for local government to adopt policy measures that take account of local conditions; and the accumulation and use of the evidence generated from local practices. However these good practices were not seen in all governance domains. For example, poor collaboration between different government departments was shown to be a considerable challenge that undermined the operation of the insurance schemes. China's success in achieving scale up of CMS and NCMS has attracted considerable interest in many low and middle income countries (LMICs), especially with regard to the schemes' designs, coverage, and funding mechanisms. However, this study demonstrates that health systems governance may be critical to enable the development and operation of such schemes. Given that many LMICs are expanding health financing system to cover populations in rural areas or the informal sectors, we argue that strengthening specific practices in each governance domain could inform the adaptation of these schemes to other settings.

Requirements for Modeling and Simulation for Space Medicine Operations: Preliminary Considerations

NASA Technical Reports Server (NTRS)

Dawson, David L.; Billica, Roger D.; Logan, James; McDonald, P. Vernon

2001-01-01

The NASA Space Medicine program is now developing plans for more extensive use of high-fidelity medical Simulation systems. The use of simulation is seen as means to more effectively use the limited time available for astronaut medical training. Training systems should be adaptable for use in a variety of training environments, including classrooms or laboratories, space vehicle mockups, analog environments, and in microgravity. Modeling and simulation can also provide the space medicine development program a mechanism for evaluation of other medical technologies under operationally realistic conditions. Systems and procedures need preflight verification with ground-based testing. Traditionally, component testing has been accomplished, but practical means for "human in the loop" verification of patient care systems have been lacking. Medical modeling and simulation technology offer potential means to accomplish such validation work. Initial considerations in the development of functional requirements and design standards for simulation systems for space medicine are discussed.

Don't fight the site: three geomorphic considerations in catchment-scale river rehabilitation planning.

PubMed

Brierley, Gary; Fryirs, Kirstie

2009-06-01

Three geomorphic considerations that underpin the design and implementation of realistic and strategic river conservation and rehabilitation programs that work with the nature are outlined. First, the importance of appreciating the inherent diversity of river forms and processes is discussed. Second, river dynamics are appraised, framing the contemporary behavioral regime of a reach in relation to system evolution to explain changes to river character and behavior over time. Third, the trajectory of a reach is framed in relation to downstream patterns of river types, analyzing landscape connectivity at the catchment scale to interpret geomorphic river recovery potential. The application of these principles is demonstrated using extensive catchment-scale analyses of geomorphic river responses to human disturbance in the Bega and Upper Hunter catchments in southeastern Australia. Differing implications for reach- and catchment-scale rehabilitation planning prompt the imperative that management practices work with nature rather than strive to 'fight the site.'

Vibration considerations for cryogenic tanks using glass bubbles insulation

NASA Astrophysics Data System (ADS)

Werlink, Rudy John; Fesmire, James; Sass, Jared P.

2012-06-01

The use of glass bubbles as an efficient and practical thermal insulation system hasbeen previously demonstrated in cryogenic storage tanks. One such example is a spherical,vacuum-jacketed liquid hydrogen vessel of 218,000 liter capacity where the boiloff rate hasbeen reduced by approximately 50 percent. Further applications may include non-stationarytanks such as mobile tankers and tanks with extreme duty cycles or exposed to significantvibration environments. Space rocket launch events and mobile tanker life cycles representtwo harsh cases of mechanical vibration exposure. A number of bulk fill insulationmaterials including glass bubbles, perlite powders, and aerogel granules were tested forvibration effects and mechanical behavior using a custom design holding fixture subjectedto random vibration on an Electrodynamic Shaker. The settling effects for mixtures ofinsulation materials were also investigated. The vibration test results and granular particleanalysis are presented with considerations and implications for future cryogenic tankapplications.

Navigating the Institutional Review Board (IRB) Process for Pharmacy-Related Research

PubMed Central

Abdelghany, Osama; Johnston, Susan; Rarus, Rachel; Austin-Szwak, Jennifer; Kirkwood, Craig

2017-01-01

Pharmacists' specialized training and knowledge qualify them to lead and engage in research pertaining to optimal medication use. Performing research promotes pharmacy professionalism and fosters interdisciplinary collaboration. To conduct research appropriately, one must have thorough knowledge of when institutional review board (IRB) approval is required and how to successfully navigate IRB processes. The overarching mission of the IRB overseeing research at an organization per federal guidelines is to protect the rights and welfare of human subjects participating in research. This article discusses the following general pharmacy practice–based considerations relating to IRB processes: strategies for developing research projects, key distinctions between quality improvement and research, practical considerations for submitting IRB applications and documentation, different categories of IRB submission, informed consent and conditions for waivers or alterations of consent, and principal investigator obligations for approved research. Pharmacists should also account for organization-specific IRB processes when designing, submitting, and implementing research projects. PMID:28321137

Designing Green Stormwater Infrastructure for Hydrologic and Human Benefits: An Image Based Machine Learning Approach

NASA Astrophysics Data System (ADS)

Rai, A.; Minsker, B. S.

2014-12-01

Urbanization over the last century has degraded our natural water resources by increasing storm-water runoff, reducing nutrient retention, and creating poor ecosystem health downstream. The loss of tree canopy and expansion of impervious area and storm sewer systems have significantly decreased infiltration and evapotranspiration, increased stream-flow velocities, and increased flood risk. These problems have brought increasing attention to catchment-wide implementation of green infrastructure (e.g., decentralized green storm water management practices such as bioswales, rain gardens, permeable pavements, tree box filters, cisterns, urban wetlands, urban forests, stream buffers, and green roofs) to replace or supplement conventional storm water management practices and create more sustainable urban water systems. Current green infrastructure (GI) practice aims at mitigating the negative effects of urbanization by restoring pre-development hydrology and ultimately addressing water quality issues at an urban catchment scale. The benefits of green infrastructure extend well beyond local storm water management, as urban green spaces are also major contributors to human health. Considerable research in the psychological sciences have shown significant human health benefits from appropriately designed green spaces, yet impacts on human wellbeing have not yet been formally considered in GI design frameworks. This research is developing a novel computational green infrastructure (GI) design framework that integrates hydrologic requirements with criteria for human wellbeing. A supervised machine learning model is created to identify specific patterns in urban green spaces that promote human wellbeing; the model is linked to RHESSYS model to evaluate GI designs in terms of both hydrologic and human health benefits. An application of the models to Dead Run Watershed in Baltimore showed that image mining methods were able to capture key elements of human preferences that could improve tree-based GI design. Hydrologic benefits associated with these features were substantial, indicating that increased urban tree coverage and a more integrated GI design approach can significantly increase both human and hydrologic benefits.

Knowledge, attitude and practices for design for safety: A study on civil & structural engineers.

PubMed

Goh, Yang Miang; Chua, Sijie

2016-08-01

Design for safety (DfS) (also known as prevention through design, safe design and Construction (Design and Management)) promotes early consideration of safety and health hazards during the design phase of a construction project. With early intervention, hazards can be more effectively eliminated or controlled leading to safer worksites and construction processes. DfS is practiced in many countries, including Australia, the UK, and Singapore. In Singapore, the Manpower Ministry enacted the DfS Regulations in July 2015, which will be enforced from August 2016 onwards. Due to the critical role of civil and structural (C&S) engineers during design and construction, the DfS knowledge, attitude and practices (KAP) of C&S engineers have significant impact on the successful implementation of DfS. Thus, this study aims to explore the DfS KAP of C&S engineers so as to guide further research in measuring and improving DfS KAP of designers. During the study, it was found that there is a lack of KAP studies in construction management. Therefore, this study also aims to provide useful lessons for future applications of the KAP framework in construction management research. A questionnaire was developed to assess the DfS KAP of C&S engineers. The responses provided by 43 C&S engineers were analyzed. In addition, interviews with experienced construction professionals were carried out to further understand perceptions of DfS and related issues. The results suggest that C&S engineers are supportive of DfS, but the level of DfS knowledge and practices need to be improved. More DfS guidelines and training should be made available to the engineers. To ensure that DfS can be implemented successfully, there is a need to study the contractual arrangements between clients and designers and the effectiveness of different implementation approaches for the DfS process. The questionnaire and findings in this study provided the foundation for a baseline survey with larger sample size, which is currently being planned. In contrast to earlier studies, the study showed that the responding C&S engineers were supportive of the DfS. The study showed that the key to improving the DfS KAP of C&S engineers is by improving clients' motivation for DfS. Copyright © 2015 Elsevier Ltd. All rights reserved.

78 FR 24211 - Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... container labels and carton labeling design, is the second in a series of three planned guidance documents...] Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling Design To... entitled ``Safety Considerations for Container Labels and Carton Labeling Design to Minimize Medication...

78 FR 39736 - Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

..., choosing a study population, using a control group and blinding, dose selection, treatment plans...] Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of Cellular... document entitled ``Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Study of water supply & sanitation practices in India using geographic information systems: some design & other considerations in a village setting.

PubMed

Gopal, Srila; Sarkar, Rajiv; Banda, Kalyan; Govindarajan, Jeyanthi; Harijan, B B; Jeyakumar, M B; Mitta, Philip; Sadanala, M E; Selwyn, Tryphena; Suresh, C R; Thomas, V A; Devadason, Pethuru; Kumar, Ranjit; Selvapandian, David; Kang, Gagandeep; Balraj, Vinohar

2009-03-01

Availability of clean water and adequate sanitation facilities are of prime importance for limiting diarrhoeal diseases. We examined the water and sanitation facilities of a village in southern India using geographic information system (GIS) tools. Places of residence, water storage and distribution, sewage and places where people in the village defaecated were mapped and drinking water sources were tested for microbial contamination in Nelvoy village, Vellore district, Tamil Nadu. Water in the village was found to be microbiologically unfit for consumption. Analysis using direct observations supplemented by GIS maps revealed poor planning, poor engineering design and lack of policing of the water distribution system causing possible contamination of drinking water from sewage at multiple sites. Until appropriate engineering designs for water supply and sewage disposal to suit individual village needs are made available, point-of-use water disinfection methods could serve as an interim solution.

A Mars Riometer: Antenna Considerations

NASA Technical Reports Server (NTRS)

Fry, Craig D.

2001-01-01

This is the final report on NASA Grant NAG5-9706. This project explored riometer (relative ionospheric opacity meter) antenna designs that would be practical for a Mars surface or balloon mission. The riometer is an important radio science instrument for terrestrial aeronomy investigations. The riometer measures absorption of cosmic radio waves by the overhead ionosphere. Studies have shown the instrument should work well on Mars, which has an appreciable daytime ionosphere. There has been concern that the required radio receiver antenna (with possibly a 10 meter scale size) would be too large or too difficult to deploy on Mars. This study addresses those concerns and presents several antenna designs and deployment options. It is found that a Mars balloon would provide an excellent platform for the riometer antenna. The antenna can be incorporated into the envelope design, allowing self-deployment of the antenna as the balloon inflates.

Implementation of a Multichannel Serial Data Streaming Algorithm using the Xilinx Serial RapidIO Solution

NASA Technical Reports Server (NTRS)

Doxley, Charles A.

2016-01-01

In the current world of applications that use reconfigurable technology implemented on field programmable gate arrays (FPGAs), there is a need for flexible architectures that can grow as the systems evolve. A project has limited resources and a fixed set of requirements that development efforts are tasked to meet. Designers must develop robust solutions that practically meet the current customer demands and also have the ability to grow for future performance. This paper describes the development of a high speed serial data streaming algorithm that allows for transmission of multiple data channels over a single serial link. The technique has the ability to change to meet new applications developed for future design considerations. This approach uses the Xilinx Serial RapidIO LOGICORE Solution to implement a flexible infrastructure to meet the current project requirements with the ability to adapt future system designs.

Optical design of a high radiative flux solar furnace for Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riveros-Rosas, D.; Perez-Rabago, C.A.; Arancibia-Bulnes, C.A.

2010-05-15

In the present work, the optical design of a new high radiative flux solar furnace is described. Several optical configurations for the concentrator of the system have been considered. Ray tracing simulations were carried out in order to determine the concentrated radiative flux distributions in the focal zone of the system, for comparing the different proposals. The best configuration was chosen in terms of maximum peak concentration, but also in terms of economical and other practical considerations. It consists of an arrangement of 409 first surface spherical facets with hexagonal shape, mounted on a spherical frame. The individual orientation ofmore » the facets is corrected in order to compensate for aberrations. The design considers an intercepted power of 30 kW and a target peak concentration above 10,000 suns. The effect of optical errors was also considered in the simulations. (author)« less

Integrating Low-Cost Rapid Usability Testing into Agile System Development of Healthcare IT: A Methodological Perspective.

PubMed

Kushniruk, Andre W; Borycki, Elizabeth M

2015-01-01

The development of more usable and effective healthcare information systems has become a critical issue. In the software industry methodologies such as agile and iterative development processes have emerged to lead to more effective and usable systems. These approaches highlight focusing on user needs and promoting iterative and flexible development practices. Evaluation and testing of iterative agile development cycles is considered an important part of the agile methodology and iterative processes for system design and re-design. However, the issue of how to effectively integrate usability testing methods into rapid and flexible agile design cycles has remained to be fully explored. In this paper we describe our application of an approach known as low-cost rapid usability testing as it has been applied within agile system development in healthcare. The advantages of the integrative approach are described, along with current methodological considerations.

Transcranial Direct Current Stimulation (tDCS): A Beginner's Guide for Design and Implementation

PubMed Central

Thair, Hayley; Holloway, Amy L.; Newport, Roger; Smith, Alastair D.

2017-01-01

Transcranial direct current stimulation (tDCS) is a popular brain stimulation method that is used to modulate cortical excitability, producing facilitatory or inhibitory effects upon a variety of behaviors. There is, however, a current lack of consensus between studies, with many results suggesting that polarity-specific effects are difficult to obtain. This article explores some of these differences and highlights the experimental parameters that may underlie their occurrence. We provide a general, practical snapshot of tDCS methodology, including what it is used for, how to use it, and considerations for designing an effective and safe experiment. Our aim is to equip researchers who are new to tDCS with the essential knowledge so that they can make informed and well-rounded decisions when designing and running successful experiments. By summarizing the varied approaches, stimulation parameters, and outcomes, this article should help inform future tDCS research in a variety of fields. PMID:29213226

Supervisor and organizational factors associated with supervisor support of job accommodations for low back injured workers

PubMed Central

Kristman, Vicki L; Shaw, William S.; Reguly, Paula; Williams-Whitt, Kelly; Soklaridis, Sophie; Loisel, Patrick

2016-01-01

PURPOSE Temporary job accommodations contribute to the prevention of chronic work disability due to low back pain (LBP) through the facilitation of early return to work; yet, workplace dimensions of job accommodation are poorly understood. The objective of this study was to determine supervisor and organizational factors associated with supervisors’ support for temporary job accommodations for LBP injured workers. METHODS Supervisors were recruited from 19 workplaces in the USA and Canada and completed an online survey regarding job accommodation practices and potential associated factors with respect to a case vignette of a worker with LBP. Multivariable linear regression was used to identify the most parsimonious set of factors associated with supervisors’ support for accommodations. RESULTS A total of 804 supervisors participated with 796 eligible for inclusion in the analysis. The final set of factors explained 21% of the variance in supervisors’ support for temporary job accommodations. Considerate leadership style (β = .261; 95 % CI: .212, .310), workplace disability management policies and practices (β = .243; 95 % CI: .188, .298), and supervisor autonomy for designing and providing workplace accommodations (β = .156; 95 % CI: .071, .241) had the largest effect on supervisor support for accommodations. CONCLUSION Factors predicting supervisors’ likelihood to accommodate LBP injured workers include use of considerate leadership style, workplace disability management policies and practices, and supervisor autonomy. Workplace interventions targeting these factors should be developed and evaluated for their ability to improve work disability prevention outcomes. PMID:27032398

Conduct, Oversight, and Ethical Considerations of Clinical Trials in Companion Animals with Cancer: Report of a Workshop on Best Practice Recommendations.

PubMed

Page, R; Baneux, P; Vail, D; Duda, L; Olson, P; Anestidou, L; Dybdal, N; Golab, G; Shelton, W; Salgaller, M; Hardy, C

2016-01-01

Development of effective and safe treatments for companion animals with cancer requires the collaboration of numerous animal health professionals and the full engagement of animal owners. Establishing 'Best Practice Recommendations' for clinical trials in veterinary oncology represents an important step toward meeting the goal of rigorous clinical trial design and conduct that is required to establish valid evidence. Likewise, optimizing patient welfare and owner education and advocacy is crucial to meet the unique ethical obligations to both owners and animals enrolled in these clinical trials and to ensure trust in the team conducting the research. To date, 'Best Practice Recommendations' for clinical trial conduct have not been reported for veterinary oncology. This document summarizes the consensus of a workshop held in November, 2014 to identify relevant ethical principles and to ensure responsible conduct of clinical research in companion animals with cancer. It is intended as a working document that will be updated as advances in science and ethical considerations require. To the extent possible, existing guidelines for the conduct and oversight of clinical trials in humans have been adapted for veterinary trials to avoid duplicative effort and to facilitate integration of clinical trials such that translational research with benefits for both companion animals and humans are encouraged. Copyright © 2016 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

Production Design: Holding It Together.

ERIC Educational Resources Information Center

Connelly, James O.

1994-01-01

Discusses production design for videos. Outlines general considerations (opening, transitions, content areas, and closing) and specific considerations (typography, screen design, music, and sound effects). Offers an example. (SR)

Managing caries: the need to close the gap between the evidence base and current practice.

PubMed

Schwendicke, F; Doméjean, S; Ricketts, D; Peters, M

2015-11-13

Underpinned by a changing knowledge of the aetiology of caries and its sequelae, and assisted by established and advancing dental materials, there is growing evidence supporting less invasive management of dental caries based on the principles of minimal intervention dentistry. This narrative review assesses both the evidence and the adoption of less invasive caries management strategies and describes ways in which the gap between evidence and practice might be overcome. While there is increasing data supporting less invasive management of carious lesions, these are not standard in most dental practices worldwide. Usually, clinical studies focused on efficacy as outcome, and did not take into consideration the views and priorities of other stakeholders, such as primary care dentists, educators, patients and those financing services. Involving these stakeholders into study design and demonstrating the broader advantages of new management strategies might improve translation of research into practice. In theory, clinical dentists can rely on a growing evidence in cariology regarding less invasive management options. In practice, further factors seem to impede adoption of these strategies. Future research should address these factors by involving major stakeholders and investigating their prioritised outcomes to narrow or close the evidence gap.

The six most essential questions in psychiatric diagnosis: A pluralogue part 2: Issues of conservatism and pragmatism in psychiatric diagnosis

PubMed Central

2012-01-01

In face of the multiple controversies surrounding the DSM process in general and the development of DSM-5 in particular, we have organized a discussion around what we consider six essential questions in further work on the DSM. The six questions involve: 1) the nature of a mental disorder; 2) the definition of mental disorder; 3) the issue of whether, in the current state of psychiatric science, DSM-5 should assume a cautious, conservative posture or an assertive, transformative posture; 4) the role of pragmatic considerations in the construction of DSM-5; 5) the issue of utility of the DSM – whether DSM-III and IV have been designed more for clinicians or researchers, and how this conflict should be dealt with in the new manual; and 6) the possibility and advisability, given all the problems with DSM-III and IV, of designing a different diagnostic system. Part I of this article took up the first two questions. Part II will take up the second two questions. Question 3 deals with the question as to whether DSM-V should assume a conservative or assertive posture in making changes from DSM-IV. That question in turn breaks down into discussion of diagnoses that depend on, and aim toward, empirical, scientific validation, and diagnoses that are more value-laden and less amenable to scientific validation. Question 4 takes up the role of pragmatic consideration in a psychiatric nosology, whether the purely empirical considerations need to be tempered by considerations of practical consequence. As in Part 1 of this article, the general introduction, as well as the introductions and conclusions for the specific questions, are written by James Phillips, and the responses to commentaries are written by Allen Frances. PMID:22512887

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

The networked student: A design-based research case study of student constructed personal learning environments in a middle school science course

NASA Astrophysics Data System (ADS)

Drexler, Wendy

This design-based research case study applied a networked learning approach to a seventh grade science class at a public school in the southeastern United States. Students adapted emerging Web applications to construct personal learning environments for in-depth scientific inquiry of poisonous and venomous life forms. The personal learning environments constructed used Application Programming Interface (API) widgets to access, organize, and synthesize content from a number of educational Internet resources and social network connections. This study examined the nature of personal learning environments; the processes students go through during construction, and patterns that emerged. The project was documented from both an instructional and student-design perspective. Findings revealed that students applied the processes of: practicing digital responsibility; practicing digital literacy; organizing content; collaborating and socializing; and synthesizing and creating. These processes informed a model of the networked student that will serve as a framework for future instructional designs. A networked learning approach that incorporates these processes into future designs has implications for student learning, teacher roles, professional development, administrative policies, and delivery. This work is significant in that it shifts the focus from technology innovations based on tools to student empowerment based on the processes required to support learning. It affirms the need for greater attention to digital literacy and responsibility in K12 schools as well as consideration for those skills students will need to achieve success in the 21st century. The design-based research case study provides a set of design principles for teachers to follow when facilitating student construction of personal learning environments.

Researchers’ Intuitions About Power in Psychological Research

PubMed Central

Bakker, Marjan; Hartgerink, Chris H. J.; Wicherts, Jelte M.; van der Maas, Han L. J.

2016-01-01

Many psychology studies are statistically underpowered. In part, this may be because many researchers rely on intuition, rules of thumb, and prior practice (along with practical considerations) to determine the number of subjects to test. In Study 1, we surveyed 291 published research psychologists and found large discrepancies between their reports of their preferred amount of power and the actual power of their studies (calculated from their reported typical cell size, typical effect size, and acceptable alpha). Furthermore, in Study 2, 89% of the 214 respondents overestimated the power of specific research designs with a small expected effect size, and 95% underestimated the sample size needed to obtain .80 power for detecting a small effect. Neither researchers’ experience nor their knowledge predicted the bias in their self-reported power intuitions. Because many respondents reported that they based their sample sizes on rules of thumb or common practice in the field, we recommend that researchers conduct and report formal power analyses for their studies. PMID:27354203

Researchers' Intuitions About Power in Psychological Research.

PubMed

Bakker, Marjan; Hartgerink, Chris H J; Wicherts, Jelte M; van der Maas, Han L J

2016-08-01

Many psychology studies are statistically underpowered. In part, this may be because many researchers rely on intuition, rules of thumb, and prior practice (along with practical considerations) to determine the number of subjects to test. In Study 1, we surveyed 291 published research psychologists and found large discrepancies between their reports of their preferred amount of power and the actual power of their studies (calculated from their reported typical cell size, typical effect size, and acceptable alpha). Furthermore, in Study 2, 89% of the 214 respondents overestimated the power of specific research designs with a small expected effect size, and 95% underestimated the sample size needed to obtain .80 power for detecting a small effect. Neither researchers' experience nor their knowledge predicted the bias in their self-reported power intuitions. Because many respondents reported that they based their sample sizes on rules of thumb or common practice in the field, we recommend that researchers conduct and report formal power analyses for their studies. © The Author(s) 2016.

An Aristotelian view of therapists' practice in multifamily therapy for young adults with severe eating disorders.

PubMed

Brinchmann, Berit Støre; Moe, Cathrine; Valvik, Mildrid Elisabeth; Balmbra, Steven; Lyngmo, Siri; Skarbø, Tove

2017-01-01

Eating disorders are serious conditions which also impact the families of adult patients. There are few qualitative studies of multifamily therapy with adults with severe eating disorders and none concerning the practice of therapists in multifamily therapy. The aim of the study is to explore therapists' practice in multifamily therapy. Research design and participants: A grounded theory approach was chosen. Data were collected through participant observation in two multifamily therapy groups and qualitative interviews with the therapists in those groups. Ethical considerations: The study conforms to the principles outlined in the Declaration of Helsinki. All participants in the multifamily therapy groups received information about the research project and signed consent forms. The data are treated confidentially and anonymised. The core category was identified as 'having many strings to one's bow', consisting of three subcategories: 'planning and readjusting', 'developing as therapist and team' and 'regulating the temperature of the group'. This article discusses the empirical findings in the frame of Aristotelian virtue ethics.

Bringing the best of medical librarianship to the patient team.

PubMed

Shearer, Barbara S; Seymour, Anne; Capitani, Cheryl

2002-01-01

This article introduces a series of articles examining the state of the medical library profession as practiced in the clinical context. It is widely understood that many changes across the spectrum of medical librarianship practice have been brought about by both technological advances and economic realities. These changes have created strains felt by many in the profession. Discussions of evolving roles for medical librarians that have gone on for years have taken on a new sense of urgency, not just because support of library services is at stake, but also because new opportunities, which many are eager to explore, await librarians. In June 2000, an editorial appearing in a mainstream medical journal proposed a reinvention of clinical librarianship that, if designed as presented in the editorial, would have a dramatic effect on current hospital-based library practice. This series of articles was developed in an effort to provide thoughtful consideration of the "informationist" model and to present new ways to look at the core competencies that define the profession.

Bringing the best of medical librarianship to the patient team

PubMed Central

Shearer, Barbara S.; Seymour, Anne; Capitani, Cheryl

2002-01-01

This article introduces a series of articles examining the state of the medical library profession as practiced in the clinical context. It is widely understood that many changes across the spectrum of medical librarianship practice have been brought about by both technological advances and economic realities. These changes have created strains felt by many in the profession. Discussions of evolving roles for medical librarians that have gone on for years have taken on a new sense of urgency, not just because support of library services is at stake, but also because new opportunities, which many are eager to explore, await librarians. In June 2000, an editorial appearing in a mainstream medical journal proposed a reinvention of clinical librarianship that, if designed as presented in the editorial, would have a dramatic effect on current hospital-based library practice. This series of articles was developed in an effort to provide thoughtful consideration of the “informationist” model and to present new ways to look at the core competencies that define the profession. PMID:11838456