Operator Performance Support System (OPSS)

DTIC Science & Technology

1992-02-01

both the military and the industry. The OPSS will propose practical application’ in how to more closely align the relationships between technical...industry. The OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator...commercial programs provide flexibility to suppori existing and futurc kourscware and "hardware enhancements. In the development process of the OPSS

Implementation of Good Agricultural Practices Food Safety Standards on Mid-Atlantic States and New York Produce Farms

ERIC Educational Resources Information Center

Nayak, Roshan

2016-01-01

In the wake of multistate outbreaks and subsequent economic cost and health causalities, food industry stakeholders formulated policies for their produce suppliers. The U.S. Food and Drug Administration's guidance on Good Agricultural Practices (GAPs) have been the basis for most of the industry initiated GAP certifications or audit processes. In…

Workplace Learning in the New Zealand Apple Industry Network: A New Co-Design Method for Government "Practice Making"

ERIC Educational Resources Information Center

Hill, Roberta; Capper, Phillip; Wilson, Ken; Whatman, Richard; Wong, Karen

2007-01-01

Purpose: The purpose of this paper is to describe how, from 2004-2006, a New Zealand research team experimented with the "change laboratory" learning process to create a new method of government policy development and implementation, referred to as "practice-making". The apple industry in Hawke's Bay was chosen because of the…

[Relationship between pharmaceutical industry and the French government during the last two centuries].

PubMed

Bonnemain, Henri; Bonnemain, Bruno

2002-01-01

Between the law of germinal an XI and the 1941 law, the relationship between the pharmaceutical industry and the French government were driven by the official practice of pharmacy. The State trues pharmacist who has to contrôle financially and deontologically his company. After 1941, the State will more and more regulate and control all the activities of the pharmaceutical products industry due to the major financial impact of these products on Health Care and Social Security budgets. French State will be progressively concerned with medical information and good practices (good manufacturing practices, good laboratory practices...) It will also regulate the pricing of new drugs, the development process and will encourage the marketing of innovative products. These rules, on the basis of the European directive of 1965, will be more or less harmonized for all European countries. Since 1989, this harmonization process is looking for an expansion outside of Europe, at least for the marketing authorization, in order to facilitate the registration of innovative products in all countries. One can then observe on a period of two centuries the evolution from freedom of the pharmaceutical industry more and more to a strict controlled freedom.

Solid waste management practices in wet coffee processing industries of Gidabo watershed, Ethiopia.

PubMed

Ulsido, Mihret D; Li, Meng

2016-07-01

The financial and social contributions of coffee processing industries within most coffee export-based national economies like Ethiopia are generally high. The type and amount of waste produced and the waste management options adopted by these industries can have negative effects on the environment. This study investigated the solid waste management options adopted in wet coffee processing industries in the Gidabo watershed of Ethiopia. A field observation and assessment were made to identify whether the operational characteristics of the industries have any effect on the waste management options that were practiced. The investigation was conducted on 125 wet coffee processing industries about their solid waste handling techniques. Focus group discussion, structured questionnaires, key informant interview and transect walks are some of the tools employed during the investigation. Two major types of wastes, namely hull-bean-pulp blended solid waste and wastewater rich in dissolved and suspended solids were generated in the industries. Wet mills, on average, released 20.69% green coffee bean, 18.58% water and 60.74% pulp by weight. Even though these wastes are rich in organic matter and recyclables; the most favoured solid waste management options in the watershed were disposal (50.4%) and industrial or household composting (49.6%). Laxity and impulsive decision are the driving motives behind solid waste management in Gidabo watershed. Therefore, to reduce possible contamination of the environment, wastes generated during the processing of red coffee cherries, such as coffee wet mill solid wastes, should be handled properly and effectively through maximisation of their benefits with minimised losses. © The Author(s) 2016.

A Pilot Assessment of Occupational Health Hazards in the US Electronic Scrap Recycling Industry

PubMed Central

Ceballos, Diana M.; Gong, Wei; Page, Elena

2015-01-01

The National Institute for Occupational Safety and Health (NIOSH) surveyed a randomly selected sample of electronic scrap (e-scrap) recycling facilities nationwide to characterize work processes, exposures, and controls. Despite multiple attempts to contact 278 facilities, only 47 responded (17% response rate). Surveyed facilities reported recycling a wide variety of electronics. The most common recycling processes were manual dismantling and sorting. Other processes included shredding, crushing, and automated separation. Many facilities reported that they had health and safety programs in place. However, some facilities reported the use of compressed air for cleaning, a practice that can lead to increased employee dust exposures, and some facilities allowed food and drinks in the production areas, a practice that can lead to ingestion of contaminants. Although our results may not be generalizable to all US e-scrap recycling facilities, they are informative regarding health and safety programs in the industry. We concluded that e-scrap recycling has the potential for a wide variety of occupational exposures particularly because of the frequent use of manual processes. On-site evaluations of e-scrap recyclers are needed to determine if reported work processes, practices, and controls are effective and meet current standards and guidelines. Educating the e-scrap recycling industry about health and safety best practices, specifically related to safe handling of metal dust, would help protect employees. PMID:25738822

A Pilot Assessment of Occupational Health Hazards in the US Electronic Scrap Recycling Industry.

PubMed

Ceballos, Diana M; Gong, Wei; Page, Elena

2015-01-01

The National Institute for Occupational Safety and Health (NIOSH) surveyed a randomly selected sample of electronic scrap (e-scrap) recycling facilities nationwide to characterize work processes, exposures, and controls. Despite multiple attempts to contact 278 facilities, only 47 responded (17% response rate). Surveyed facilities reported recycling a wide variety of electronics. The most common recycling processes were manual dismantling and sorting. Other processes included shredding, crushing, and automated separation. Many facilities reported that they had health and safety programs in place. However, some facilities reported the use of compressed air for cleaning, a practice that can lead to increased employee dust exposures, and some facilities allowed food and drinks in the production areas, a practice that can lead to ingestion of contaminants. Although our results may not be generalizable to all US e-scrap recycling facilities, they are informative regarding health and safety programs in the industry. We concluded that e-scrap recycling has the potential for a wide variety of occupational exposures particularly because of the frequent use of manual processes. On-site evaluations of e-scrap recyclers are needed to determine if reported work processes, practices, and controls are effective and meet current standards and guidelines. Educating the e-scrap recycling industry about health and safety best practices, specifically related to safe handling of metal dust, would help protect employees.

Service innovation management practices in the telecommunications industry: what does cross country analysis reveal?

PubMed

Rahman, Syed Abidur; Taghizadeh, Seyedeh Khadijeh; Ramayah, T; Ahmad, Noor Hazlina

2015-01-01

Service innovation management practice is currently being widely scrutinized mainly in the developed countries, where it has been initiated. The current study attempts to propose a framework and empirically validate and explain the service innovation practices for successful performance in the telecommunications industry of two developing countries, Malaysia and Bangladesh. The research framework proposes relationships among organisational culture, operating core (innovation process, cross-functional organisation, and implementation of tools/technology), competition-informed pricing, and performance. A total of 176 usable data from both countries are analysed for the purpose of the research. The findings show that organisational culture tends to be more influential on innovation process and cross-functional organisation in Malaysian telecommunication industry. In contrast, implementation of tools/technology plays a more instrumental role in competition-informed pricing practices in Bangladesh. This study revealed few differences in the innovation management practices between two developing countries. The findings have strategic implications for the service sectors in both the developing countries regarding implementation of innovative enterprises, especially in Bangladesh where innovation is the basis for survival. Testing the innovation management practices in the developing countries perhaps contains uniqueness in the field of innovation management.

Codes of environmental management practice: Assessing their potential as a tool for change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nash, J.; Ehrenfeld, J.

1997-12-31

Codes of environmental management practice emerged as a tool of environmental policy in the late 1980s. Industry and other groups have developed codes for two purposes: to change the environmental behavior of participating firms and to increase public confidence in industry`s commitment to environmental protection. This review examines five codes of environmental management practice: Responsible Care, the International Chamber of Commerce`s Business Charter for Sustainable Development, ISO 14000, the CERES Principles, and The Natural Step. The first three codes have been drafted and promoted primarily by industry; the others have been developed by non-industry groups. These codes have spurred participatingmore » firms to introduce new practices, including the institution of environmental management systems, public environmental reporting, and community advisory panels. The extent to which codes are introducing a process of cultural change is considered in terms of four dimensions: new consciousness, norms, organization, and tools. 94 refs., 3 tabs.« less

An Investigation of the Applicability of Modern Management Processes by Industrial Managers in Turkey.

ERIC Educational Resources Information Center

Lauter, Geza Peter

This study noted American concepts of modern management which Turkish industrial managers tend to find difficult: identified cultural, economic, and other factors that impede application of modern management processes; and compared the practices of American overseas managers with those of Turkish managers of domestic firms. Managerial performance…

Robust PLS approach for KPI-related prediction and diagnosis against outliers and missing data

NASA Astrophysics Data System (ADS)

Yin, Shen; Wang, Guang; Yang, Xu

2014-07-01

In practical industrial applications, the key performance indicator (KPI)-related prediction and diagnosis are quite important for the product quality and economic benefits. To meet these requirements, many advanced prediction and monitoring approaches have been developed which can be classified into model-based or data-driven techniques. Among these approaches, partial least squares (PLS) is one of the most popular data-driven methods due to its simplicity and easy implementation in large-scale industrial process. As PLS is totally based on the measured process data, the characteristics of the process data are critical for the success of PLS. Outliers and missing values are two common characteristics of the measured data which can severely affect the effectiveness of PLS. To ensure the applicability of PLS in practical industrial applications, this paper introduces a robust version of PLS to deal with outliers and missing values, simultaneously. The effectiveness of the proposed method is finally demonstrated by the application results of the KPI-related prediction and diagnosis on an industrial benchmark of Tennessee Eastman process.

Quality management benchmarking: FDA compliance in pharmaceutical industry.

PubMed

Jochem, Roland; Landgraf, Katja

2010-01-01

By analyzing and comparing industry and business best practice, processes can be optimized and become more successful mainly because efficiency and competitiveness increase. This paper aims to focus on some examples. Case studies are used to show knowledge exchange in the pharmaceutical industry. Best practice solutions were identified in two companies using a benchmarking method and five-stage model. Despite large administrations, there is much potential regarding business process organization. This project makes it possible for participants to fully understand their business processes. The benchmarking method gives an opportunity to critically analyze value chains (a string of companies or players working together to satisfy market demands for a special product). Knowledge exchange is interesting for companies that like to be global players. Benchmarking supports information exchange and improves competitive ability between different enterprises. Findings suggest that the five-stage model improves efficiency and effectiveness. Furthermore, the model increases the chances for reaching targets. The method gives security to partners that did not have benchmarking experience. The study identifies new quality management procedures. Process management and especially benchmarking is shown to support pharmaceutical industry improvements.

Developing Industry Linkages: Learning from Practice.

ERIC Educational Resources Information Center

Misko, Josie

Linkages between Australia's vocational education and training (VET) and technical and further education (TAFE) sectors and industry were examined through 13 case studies involving a variety of industrial sectors in South Australia, New South Wales, and Victoria. Special attention was paid to the processes established by school clusters to develop…

Quality in the pharmaceutical industry – A literature review

PubMed Central

Haleem, Reham M.; Salem, Maissa Y.; Fatahallah, Faten A.; Abdelfattah, Laila E.

2013-01-01

Objectives The aim of this study is to:a.Highlight the most important guidelines and practices of quality in the pharmaceutical industry.b.Organize such guidelines and practices to create a guide to pave the way for other researchers who would like to dig deeper into these guidelines and practices. Design A review was conducted of 102 publications; 56 publications were concerned with the pharmaceutical quality directly while 46 publications were concerned with the general quality practices. The content of those sources was analyzed and the following themes were identified:a.Research theme 1: Guidelines of the pharmaceutical quality.b.Research theme 2: General practices recently applied in the pharmaceutical industry. Main outcome measures The following guidelines were identified and reviewed: WHO guidelines, FDA guidelines, EU guidelines and ICH guidelines in the research theme I. In research theme II; the following topics were identified and reviewed: quality risk management, quality by design, corrective actions and preventive actions, process capability analysis, Six Sigma, process analytical technology, lean manufacturing, total quality management, ISO series and HACCP. Results Upon reviewing the previously highlighted guidelines and the practices that are widely applied in the pharmaceutical industry, it was noticed that there is an abundant number of papers and articles that explain the general guidelines and practices but the literature lack those describing application; case studies of the pharmaceutical factories applying those guidelines and significance of those guidelines and practices. Conclusions It is recommended that the literature would invest more in the area of application and significance of guidelines and practices. New case studies should be done to prove the feasibility of such practices. PMID:26594110

Gelatin-Filtered Consomme: A Practical Demonstration of the Freezing and Thawing Processes

ERIC Educational Resources Information Center

Lahne, Jacob B.; Schmidt, Shelly J.

2010-01-01

Freezing is a key food processing and preservation technique widely used in the food industry. Application of best freezing and storage practices extends the shelf-life of foods for several months, while retaining much of the original quality of the fresh food. During freezing, as well as its counterpart process, thawing, a number of critical…

Solar Access to Public Capital (SAPC) Working Group: Best Practices in Commercial and Industrial (C&I) Solar Photovoltaic System Installation; Period of Performance: November 28, 2014-September 1, 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doyle, Chris; Loomans, Len; Truitt, Andrew

2015-12-29

This Best Practices in Commercial and Industrial Solar Photovoltaic System Installation Guide is the second of a series of guides designed to standardize and improve solar asset transparency for investors and rating agencies, provide an industry framework for quality management, and reduce transaction costs in the solar asset securitization process. The Best Practices in C&I PV System Installation Guide is intended to outline the minimum requirements for commercial and industrial solar project developments. Adherence to the guide is voluntary. Providers that adhere to the guide are responsible for self-certifying that they have fulfilled the guide requirements. Investors and rating agenciesmore » should verify compliance.« less

Automotive Marketing Methods and Practice

DOT National Transportation Integrated Search

1979-09-01

The report is a comprehensive examination of the current marketing practices, marketing methodologies, and decision-making processes utilized by the domestic automotive industry. The various marketing elements, such as products, consumer behavior, sa...

Theoretical/best practice energy use in metalcasting operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schifo, J. F.; Radia, J. T.

2004-05-01

This study determined the theoretical minimum energy requirements for melting processes for all ferrous and noferrous engenieering alloys. Also the report details the Best Practice energy consumption for the industry.

Energy Efficiency Improvement and Cost Saving Opportunities for the Fruit and Vegetable Processing Industry. An ENERGY STAR Guide for Energy and Plant Managers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masanet, Eric; Masanet, Eric; Worrell, Ernst

2008-01-01

The U.S. fruit and vegetable processing industry--defined in this Energy Guide as facilities engaged in the canning, freezing, and drying or dehydrating of fruits and vegetables--consumes over $800 million worth of purchased fuels and electricity per year. Energy efficiency improvement isan important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. fruit and vegetable processing industry to reduce energy consumption in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implementedmore » at the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. fruit and vegetable processing industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures applicable to fruit and vegetable processing plants are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in fruit and vegetable processing facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. Given the importance of water in fruit and vegetable processing, a summary of basic, proven measures for improving plant-level water efficiency are also provided. The information in this Energy Guide is intended to help energy and plant managers in the U.S. fruit and vegetable processing industry reduce energy and water consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures--as well as on their applicability to different production practices--is needed to assess their cost effectiveness at individual plants.« less

Food Processing and Agriculture. Wisconsin Annual Farm Labor Report, 1968.

ERIC Educational Resources Information Center

Wisconsin State Employment Service, Madison.

A yearly report on the migrant farm worker situation in Wisconsin evaluates the year 1968 in relation to past years and makes projections for the future. Comparisons are made of trends in year-round employment practices, seasonal food processing, the cherry industry, and the cucumber industry. The report includes a discussion on the social aspects…

Work, Skills and Training in the Australian Red Meat Processing Sector. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Norton, Kent; Rafferty, Mike

2010-01-01

Work practices in the meat-processing industry have changed in recent years. The industry has moved away from workers dressing a whole carcass towards a chain-based system, with each worker performing a single task along a moving production line. The nature of the meat-processing workforce has also changed. It is no longer dominated by seasonal…

Entrepreneurial Alliances: A Study of Entrepreneurship and Strategic Alliances in the Charter School Industry

ERIC Educational Resources Information Center

Washington, Cheryl A.

2012-01-01

This study investigated the practices, processes, and success rates of 15 entrepreneurial alliances in the Texas charter school industry. The research involved interdisciplinary industries (business and education) and focused on how a specific type of alliance structure utilized social innovation to exploit opportunity and impact change in the…

[Establishment of industry promotion technology system in Chinese medicine secondary exploitation based on "component structure theory"].

PubMed

Cheng, Xu-Dong; Feng, Liang; Zhang, Ming-Hua; Gu, Jun-Fei; Jia, Xiao-Bin

2014-10-01

The purpose of the secondary exploitation of Chinese medicine is to improve the quality of Chinese medicine products, enhance core competitiveness, for better use in clinical practice, and more effectively solve the patient suffering. Herbs, extraction, separation, refreshing, preparation and quality control are all involved in the industry promotion of Chinese medicine secondary exploitation of industrial production. The Chinese medicine quality improvement and industry promotion could be realized with the whole process of process optimization, quality control, overall processes improvement. Based on the "component structure theory", "multi-dimensional structure & process dynamic quality control system" and systematic and holistic character of Chinese medicine, impacts of whole process were discussed. Technology systems of Chinese medicine industry promotion was built to provide theoretical basis for improving the quality and efficacy of the secondary development of traditional Chinese medicine products.

Multi-criteria decision support framework for sustainable implementation of effective green supply chain management practices.

PubMed

Boutkhoum, Omar; Hanine, Mohamed; Boukhriss, Hicham; Agouti, Tarik; Tikniouine, Abdessadek

2016-01-01

At present, environmental issues become real critical barriers for many supply chain corporations concerning the sustainability of their businesses. In this context, several studies have been proposed from both academia and industry trying to develop new measurements related to green supply chain management (GSCM) practices to overcome these barriers, which will help create new environmental strategies, implementing those practices in their manufacturing processes. The objective of this study is to present the technical and analytical contribution that multi-criteria decision making analysis (MCDA) can bring to environmental decision making problems, and especially to GSCM field. For this reason, a multi-criteria decision-making methodology, combining fuzzy analytical hierarchy process and fuzzy technique for order preference by similarity to ideal solution (fuzzy TOPSIS), is proposed to contribute to a better understanding of new sustainable strategies through the identification and evaluation of the most appropriate GSCM practices to be adopted by industrial organizations. The fuzzy AHP process is used to construct hierarchies of the influential criteria, and then identify the importance weights of the selected criteria, while the fuzzy TOPSIS process employs these weighted criteria as inputs to evaluate and measure the performance of each alternative. To illustrate the effectiveness and performance of our MCDA approach, we have applied it to a chemical industry corporation located in Safi, Morocco.

Modeling operation of mechanism of holistic management of technological processes at enterprise

NASA Astrophysics Data System (ADS)

Igorevich Shanin, Igor; Aleksandrovna Boris, Olga

2018-03-01

Enterprises applying modeling and technological process management approaches represent a sector of a new innovative economic system. First of all, they are innovators using innovative proposals and various resources to solve practical problems. Their work leads to balanced positive technological changes. In other words, they constitute industrial entrepreneurship with innovative goals and vice versa - innovative entrepreneurship with industrial objectives. It should be noted that the mechanism of holistic management of technological processes at the enterprise combines a traditional industrial organization of production, an innovative and technological enterprise. The enterprise borrows industrial targets from the latter one, an innovative component - from innovative activity and entrepreneurial approaches to holistic management - from a commercial firm.

Biotechnology: Impact on sugarcane agriculture and industry

USDA-ARS?s Scientific Manuscript database

Of the nine key technology issues that affect the sustainability of the sugar- or bio-energy- cane industry, namely: land, fertility, water, variety, planting density, crop protection, cultural practices, harvesting and processing, and lately, information technology, growing the right varieties rema...

MANUAL: POLLUTION PREVENTION IN THE PAINTS AND COATINGS INDUSTRY

EPA Science Inventory

The paints and coatings industry represents a significant source of multimedia pollution through the wide use of solvent-based process materials and the extensive amounts of wastewater generated by the operations. This manual presents recommended practices for minimizing the gene...

Impact of biotechnology on sugarcane agriculture and industry

USDA-ARS?s Scientific Manuscript database

There are nine key issues that can influence the productivity and sustainability of the sugarcane industry. These include land, soil fertility, water, variety, planting density, crop protection, cultural practices, harvesting and processing, and information technology. To all sugarcane farmers, it r...

Short communication: Snapshot of industry milk hauling practices in the western United States.

PubMed

Kuhn, Eva; Meunier-Goddik, Lisbeth; Waite-Cusic, Joy G

2018-03-01

The Pasteurized Milk Ordinance (PMO) mandates milk hauling sanitation and operational practices; however, the use of vague language (i.e., "as needed") and gaps in processes lead to variability in industry practices. Our aim was to characterize industry milk hauling practices and identify areas that may be an unexplained source of contamination in the dairy processing continuum, and communicate this information with industry to cultivate best practices. The objectives of this study were to (1) survey industry hauling sanitation and operation practices in the Pacific Northwest region of the United States, and (2) quantify microbial populations [aerobic plate count (APC), lactic acid bacteria, coliforms] on the internal surfaces of transfer hoses (tanker and receiving bay) to determine their potential contribution to the microbiological quality of raw milk. Eleven facilities (78% response rate) participated in our survey. All facilities surveyed were compliant with the PMO; however, overall milk reception layout, sanitation practices, and routine maintenance greatly varied between facilities. Farm hose samples (n = 115) had significantly higher microbial loads (APC: mean 4.7 log cfu/100 cm 2 ; median 5.1 log cfu/cm 2 ) than receiving hose samples (n = 57; APC: mean: 2.1 log cfu/100 cm 2 ; median 1.9 log cfu/100 cm 2 ). Microbial populations on transfer hose surfaces did not correlate with time since last cleaning for either tanker or receiving bay hoses. Microbial content of farm hoses is likely to reflect the microbial quality of the previous milk transferred through the hose, making on-farm management practices the primary consideration to maintain low microbiological counts downstream. Upon arrival at the processor, 10% of farm hoses were missing caps. Although this did not correlate with elevated microbiological counts, uncapped farm hoses are exposed to the farm environment, provide opportunity for contamination, and are in violation of the PMO. Through observations made during our studies, manual cleaning procedures appear to be a major weakness in hauling practices and need more attention. Recognizing and communicating variability and areas of weakness allows industry to elevate their hauling sanitation and operational practices to maintain optimum milk microbiological quality. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Internal Benchmarking for Institutional Effectiveness

ERIC Educational Resources Information Center

Ronco, Sharron L.

2012-01-01

Internal benchmarking is an established practice in business and industry for identifying best in-house practices and disseminating the knowledge about those practices to other groups in the organization. Internal benchmarking can be done with structures, processes, outcomes, or even individuals. In colleges or universities with multicampuses or a…

The Effects of Employing HVM on C-130 Aircraft at WR-ALC to Aircraft Availability

DTIC Science & Technology

2011-06-01

processes of numerous commercial companies such as American Airlines, TIMCO, the Royal Canadian Air Force, and Hon Furniture to determine how and why...commercial industry best practices that best achieve higher labor burn rates and the challenges of implementing these practices into the traditional...Challenges According to Jerry Mobley, the HVM team in 2007 initiated the study and industrial analysis of the Maintenance, Repair, and Overhaul (MRO

Changing gender roles and health impacts among female workers in export-processing industries in Sri Lanka.

PubMed

Attanapola, Chamila T

2004-06-01

Since the economic liberalization in 1977, a large number of Sri Lankan women have entered the labour market and engaged in income-generating activities. Some women choose to travel abroad as domestic workers, while others choose to work in export-processing industries. This process has a profound impact on gender and gender roles in Sri Lanka. Young rural women have changed their traditional women's roles to become independent daughters, efficient factory workers and partially modernized women. Even though changing gender roles are identified as a positive impact of industrial work, the new social, cultural, and legal environments of industrial work have negative impacts on these women's lives. This paper explores health impacts of changing gender roles and practices of young rural women, focusing on the experiences of female workers in export-processing industries. Further, it contributes to the literature on gender and health, and on qualitative approaches within health geographic studies. A model is formulated to suggest a conceptual framework for studying women's health. The model describes the determinant factors of individual health status based on the question of who (personal attributes) does what (type of work) where (place), when and how (behaviours). These are also determinant factors of gender and gender roles of a society. The three types of health problems (reproductive, productive and mental health) of a woman, in this case a female industrial worker, are determined by her gender roles and practices associated with these roles.

Undue industry influences that distort healthcare research, strategy, expenditure and practice: a review.

PubMed

Stamatakis, Emmanuel; Weiler, Richard; Ioannidis, John P A

2013-05-01

Expenditure on industry products (mostly drugs and devices) has spiraled over the last 15 years and accounts for substantial part of healthcare expenditure. The enormous financial interests involved in the development and marketing of drugs and devices may have given excessive power to these industries to influence medical research, policy, and practice. Review of the literature and analysis of the multiple pathways through which the industry has directly or indirectly infiltrated the broader healthcare systems. We present the analysis of the industry influences at the following levels: (i) evidence base production, (ii) evidence synthesis, (iii) understanding of safety and harms issues, (iv) cost-effectiveness evaluation, (v) clinical practice guidelines formation, (vi) healthcare professional education, (vii) healthcare practice, (viii) healthcare consumer's decisions. We located abundance of consistent evidence demonstrating that the industry has created means to intervene in all steps of the processes that determine healthcare research, strategy, expenditure, practice and education. As a result of these interferences, the benefits of drugs and other products are often exaggerated and their potential harms are downplayed, and clinical guidelines, medical practice, and healthcare expenditure decisions are biased. To serve its interests, the industry masterfully influences evidence base production, evidence synthesis, understanding of harms issues, cost-effectiveness evaluations, clinical practice guidelines and healthcare professional education and also exerts direct influences on professional decisions and health consumers. There is an urgent need for regulation and other action towards redefining the mission of medicine towards a more objective and patient-, population- and society-benefit direction that is free from conflict of interests. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by Blackwell Publishing Ltd.

Recruitment and Selection in Business and Industry: Learning from the Private Sector Theory and Practice.

ERIC Educational Resources Information Center

Munoz, Maria D.; Munoz, Marco A.

Recruitment and selection practices in the private sector were examined through a literature review to identify strategies that human resource (HR) departments can use in designing new employee recruitment and selection processes or improving existing processes. The following were among the findings: (1) new employees recruited by using informal…

Application of dextranases in sugarcane factory: overcoming practical problems

USDA-ARS?s Scientific Manuscript database

Dextranases only have a small market and low volume sales compared to many other industrial enzymes. Consequently, research and development efforts to engineer tailormade properties of destranases to specific conditions of industrial processes have not occurred and are not expected soon. This book...

Certifying Industrial Energy Efficiency Performance: AligningManagement, Measurement, and Practice to Create Market Value

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKane, Aimee; Scheihing, Paul; Williams, Robert

2007-07-01

More than fifteen years after the launch of programs in theU.K. and U.S., industry still offers one of the largest opportunities forenergy savings worldwide. The International Energy Agency (IEA) estimatesthe savings potential from cost-optimization of industrial motor-drivensystems alone at 7 percent of global electricity use. The U.S. Departmentof Energy (USDOE) Industrial Technologies Program estimates 7 percentsavings potential in total US industrial energy use through theapplication of proven best practice. Simple paybacks for these types ofprojects are frequently two years or less. The technology required toachieve these savings is widely available; the technical skills requiredto identify energy saving opportunities are knownmore » and transferable.Although programs like USDOE's Best Practices have been highlysuccessful, most plants, as supported by 2002 MECS data, remain eitherunaware or unmotivated to improve their energy efficiency--as evidencedby the 98 percent of US industrial facilities reporting to MECS say thatthey lack a full-time energy manager. With the renewed interest in energyefficiency worldwide and the emergence of carbon trading and newfinancial instruments such as white certificates1, there is a need tointroduce greater transparency into the way that industrial facilitiesidentify, develop, and document energy efficiency projects. Historically,industrial energy efficiency projects have been developed by plantengineers, frequently with assistance from consultants and/or supplierswith highly specialized technical skills. Under this scenario,implementation of energy efficiency improvements is dependent onindividuals. These individuals typically include "champions" within anindustrial facility or corporation, working in cooperation withconsultants or suppliers who have substantial knowledge based on years ofexperience. This approach is not easily understood by others without thisspecialized technical knowledge, penetrates the market fairly slowly, andhas no assurance of persistence, since champions may leave the company orbe reassigned after project completion.This paper presents an alternatescenario that builds on the body of expert knowledge concerning energymanagement best practices and the experience of industrial champions toengage industry in continuous energy efficiency improvement at thefacility rather than the individual level. Under this scenario,standardized methodologies for applying and validating energy managementbest practices in industrial facilities will be developed through aconsensus process involving both plant personnel and specializedconsultants and suppliers. The resulting protocols will describe aprocess or framework for conducting an energy savings assessment andverifying the results that will be transparent to policymakers, managers,and the financial community, and validated by a third-party organization.Additionally, a global dialogue is being initiated by the United NationsIndustrial Development Organization (UNIDO) concerning the development ofan international industrial energy management standard that would be ISOcompatible. The proposed scenario will combine the resulting standardwith the best practice protocols for specific energy systems (i.e.,steam, process heating, compressed air, pumping systems, etc.) to formthe foundation of a third party, performance-based certification programfor the overall industrial facility that is compatible with existingmanagement systems, including ISO 9001:2000, 14001:2004 and 6 Sigma. Thelong term goal of this voluntary, industry designed certification programis to develop a transparent, globally accepted system for validatingenergy efficiency projects and management practices. This system wouldcreate a verified record of energy savings with potential market valuethat could be recognized among sectors and countries.« less

High-powered CO2 -lasers and noise control

NASA Astrophysics Data System (ADS)

Honkasalo, Antero; Kuronen, Juhani

High-power CO2 -lasers are being more and more widely used for welding, drilling and cutting in machine shops. In the near future, different kinds of surface treatments will also become routine practice with laser units. The industries benefitting most from high power lasers will be: the automotive industry, shipbuilding, the offshore industry, the aerospace industry, the nuclear and the chemical processing industries. Metal processing lasers are interesting from the point of view of noise control because the working tool is a laser beam. It is reasonable to suppose that the use of such laser beams will lead to lower noise levels than those connected with traditional metal processing methods and equipment. In the following presentation, the noise levels and possible noise-control problems attached to the use of high-powered CO2 -lasers are studied.

Integrating strategic environmental assessment with industry planning: a case study of the Pasquai-Porcupine forest management plan, Saskatchewan, Canada.

PubMed

Noble, Bram F

2004-03-01

Strategic environmental assessment (SEA) is gaining widespread recognition as a tool for integrating environmental considerations in policy, plan, and program development and decision-making. Notwithstanding the potential of SEA to improve higher-order decision processes, there has been very little attention given to integrating SEA with industry planning practices. As a result, the benefits of SEA have yet to be fully realized among industrial proponents. That said, SEA practice is ongoing, albeit informally and often under a different label, and is proving to be a valuable tool for industry planning and decision-making. Based on a case study of the Pasquai-Porcupine forest management plan in Saskatchewan, Canada, this paper illustrates how an integrated approach to SEA can contribute to industry environmental decision-making and can enhance the quality and deliverability of industry plans.

A case study in technology utilization: Industrial products and practices. [summary of benefits to national economy resulting from space programs

NASA Technical Reports Server (NTRS)

1973-01-01

In pursuit of such missions as Apollo, the National Aeronautics and Space Administration has called into being unique equipment that obviously has little direct application beyond the achievement of mission objectives. Yet, to assume that further direct application of space program hardware is somehow a measure of the industrial benefits accruing to the nation is to misunderstand how the creation of new technology affects modern industrial capability. This document presents a profile of the significant ways in which technological developments in response to aerospace mission requirements have been coupled into industrial practice, with the result being that improved products and processes are now being utilized to benefit the nation.

Membrane applications and research in food processing: An assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohr, C.M.; Leeper, S.A.; Engelau, D.E.

This assessment is intended to aid in planning separations research and development projects aimed at reducing energy consumption in the food industry. The food processing industry uses approximately 1.5 quadrillion Btu per year, 2% of the US national annual energy consumption. Food processing involves a variety of liquid feed, product, and waste streams and makes extensive use of thermal operations such as drying, evaporation, pasteurization, and distillation. As such, it is a candidate for energy conservation through the use of membrane separations. The assessment is organized according to Standard Industry Classification (SIC) Code for the food industry. Individual subindustries consideredmore » are: (a) Meat Processing, Dairy Products, Preserved Fruit and Vegetables, Grain Milling, Bakery Products, Sugar and Confectionery products, Edible Fats and Oils, and Beverages. Topics covered include: (a) background information on food processing and membrane separations, (b) a review of current and developing membrane separations for the food industry, (c) energy consumption and processes used in individual subindustries, (d) separations in the subindustries that could be augmented or replaced by membrane processes, (e) industry practices and market conditions that could affect adoption of new technologies, and (f) prioritized recommendations for DOE-OIP supported research to further use of membrane separations in the food industry. 435 refs.« less

76 FR 4360 - Guidance for Industry on Process Validation: General Principles and Practices; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... elements of process validation for the manufacture of human and animal drug and biological products... process validation for the manufacture of human and animal drug and biological products, including APIs. This guidance describes process validation activities in three stages: In Stage 1, Process Design, the...

Efficiency of innovative technology in construction industry

NASA Astrophysics Data System (ADS)

Stverkova, H.; Vaclavik, V.

2017-10-01

The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

Short-range transit planning : current practice and a proposed framework

DOT National Transportation Integrated Search

1984-06-01

The research described in this report explored the service and operations : planning process in the transit industry in a two-phase approach. In the first : phase a detailed assessment of current short range transit planning practice was : undertaken...

The safety of bone allografts used in dentistry: a review.

PubMed

Holtzclaw, Dan; Toscano, Nicholas; Eisenlohr, Lisa; Callan, Don

2008-09-01

Recent media reports concerning "stolen body parts" have shaken the public's trust in the safety of and the use of ethical practices involving human allografts. The authors provide a comprehensive review of the safety aspects of human bone allografts. The authors reviewed U.S. government regulations, industry standards, independent industry association guidelines, company guidelines and scientific articles related to the use of human bone allografts in the practice of dentistry published in the English language. The use of human bone allografts in the practice of dentistry involves the steps of procurement, processing, use and tracking. Rigorous donor screening and aseptic proprietary processing programs have rendered the use of human bone allografts safe and effective as a treatment option. When purchasing human bone allografts for the practice of dentistry, one should choose products accredited by the American Association of Tissue Banks for meeting uniformly high safety and quality control measures. Knowledge of human bone allograft procurement, processing, use and tracking procedures may allow dental clinicians to better educate their patients and address concerns about this valuable treatment option.

Industrial application of semantic process mining

NASA Astrophysics Data System (ADS)

Espen Ingvaldsen, Jon; Atle Gulla, Jon

2012-05-01

Process mining relates to the extraction of non-trivial and useful information from information system event logs. It is a new research discipline that has evolved significantly since the early work on idealistic process logs. Over the last years, process mining prototypes have incorporated elements from semantics and data mining and targeted visualisation techniques that are more user-friendly to business experts and process owners. In this article, we present a framework for evaluating different aspects of enterprise process flows and address practical challenges of state-of-the-art industrial process mining. We also explore the inherent strengths of the technology for more efficient process optimisation.

Flow Sheet Is Process Language.

ERIC Educational Resources Information Center

Fehr, Manfred

1988-01-01

Uses heat exchange, evaporator, and distillation pressure examples to illustrate ways of motivating students to participate creatively and generate questions on process engineering logic. Relates the need for providing a link between theory and industrial practice. (RT)

Theory and Practice Meets in Industrial Process Design -Educational Perspective-

NASA Astrophysics Data System (ADS)

Aramo-Immonen, Heli; Toikka, Tarja

Software engineer should see himself as a business process designer in enterprise resource planning system (ERP) re-engineering project. Software engineers and managers should have design dialogue. The objective of this paper is to discuss the motives to study the design research in connection of management education in order to envision and understand the soft human issues in the management context. Second goal is to develop means of practicing social skills between designers and managers. This article explores the affective components of design thinking in industrial management domain. In the conceptual part of this paper are discussed concepts of network and project economy, creativity, communication, use of metaphors, and design thinking. Finally is introduced empirical research plan and first empirical results from design method experiments among the multi-disciplined groups of the master-level students of industrial engineering and management and software engineering.

Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy

2001-08-06

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

Creativity, Scientific Practice, and Knowledge Production

ERIC Educational Resources Information Center

Fryer, Marilyn

2010-01-01

In this interesting article, Hisham Ghassib (2010) describes the transformation of science from its craft status in a pre-modern era to the major knowledge industry it is today. He then compares the production of scientific knowledge with industrial production, but makes the important distinction between the process of developing scientific…

77 FR 14343 - Announcement of the American Petroleum Institute's Standards Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... Petroleum Institute develops and publishes voluntary standards for equipment, materials, operations, and processes for the petroleum and natural gas industry. These standards are used by both private industry and... Transportation of Line Pipe, 1st Edition. Recommended Practice 6DR, Repair and Remanufacture of Pipeline Valves...

Practical Nursing. Ohio's Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Developed through a modified DACUM (Developing a Curriculum) process involving business, industry, labor, and community agency representatives in Ohio, this document is a comprehensive and verified employer competency profile for practical nursing. The list contains units (with and without subunits), competencies, and competency builders that…

Framework for managing mycotoxin risks in the food industry.

PubMed

Baker, Robert C; Ford, Randall M; Helander, Mary E; Marecki, Janusz; Natarajan, Ramesh; Ray, Bonnie

2014-12-01

We propose a methodological framework for managing mycotoxin risks in the food processing industry. Mycotoxin contamination is a well-known threat to public health that has economic significance for the food processing industry; it is imperative to address mycotoxin risks holistically, at all points in the procurement, processing, and distribution pipeline, by tracking the relevant data, adopting best practices, and providing suitable adaptive controls. The proposed framework includes (i) an information and data repository, (ii) a collaborative infrastructure with analysis and simulation tools, (iii) standardized testing and acceptance sampling procedures, and (iv) processes that link the risk assessments and testing results to the sourcing, production, and product release steps. The implementation of suitable acceptance sampling protocols for mycotoxin testing is considered in some detail.

International benchmarking and best practice management: in search of health care and hospital excellence.

PubMed

von Eiff, Wilfried

2015-01-01

Hospitals worldwide are facing the same opportunities and threats: the demographics of an aging population; steady increases in chronic diseases and severe illnesses; and a steadily increasing demand for medical services with more intensive treatment for multi-morbid patients. Additionally, patients are becoming more demanding. They expect high quality medicine within a dignity-driven and painless healing environment. The severe financial pressures that these developments entail oblige care providers to more and more cost-containment and to apply process reengineering, as well as continuous performance improvement measures, so as to achieve future financial sustainability. At the same time, regulators are calling for improved patient outcomes. Benchmarking and best practice management are successfully proven performance improvement tools for enabling hospitals to achieve a higher level of clinical output quality, enhanced patient satisfaction, and care delivery capability, while simultaneously containing and reducing costs. This chapter aims to clarify what benchmarking is and what it is not. Furthermore, it is stated that benchmarking is a powerful managerial tool for improving decision-making processes that can contribute to the above-mentioned improvement measures in health care delivery. The benchmarking approach described in this chapter is oriented toward the philosophy of an input-output model and is explained based on practical international examples from different industries in various countries. Benchmarking is not a project with a defined start and end point, but a continuous initiative of comparing key performance indicators, process structures, and best practices from best-in-class companies inside and outside industry. Benchmarking is an ongoing process of measuring and searching for best-in-class performance: Measure yourself with yourself over time against key performance indicators. Measure yourself against others. Identify best practices. Equal or exceed this best practice in your institution. Focus on simple and effective ways to implement solutions. Comparing only figures, such as average length of stay, costs of procedures, infection rates, or out-of-stock rates, can lead easily to wrong conclusions and decision making with often-disastrous consequences. Just looking at figures and ratios is not the basis for detecting potential excellence. It is necessary to look beyond the numbers to understand how processes work and contribute to best-in-class results. Best practices from even quite different industries can enable hospitals to leapfrog results in patient orientation, clinical excellence, and cost-effectiveness. Despite common benchmarking approaches, it is pointed out that a comparison without "looking behind the figures" (what it means to be familiar with the process structure, process dynamic and drivers, process institutions/rules and process-related incentive components) will be extremely limited referring to reliability and quality of findings. In order to demonstrate transferability of benchmarking results between different industries practical examples from health care, automotive, and hotel service have been selected. Additionally, it is depicted that international comparisons between hospitals providing medical services in different health care systems do have a great potential for achieving leapfrog results in medical quality, organization of service provision, effective work structures, purchasing and logistics processes, or management, etc.

ROMI-3: Rough-Mill Simulator Version 3.0: User's Guide

Treesearch

Joel M. Weiss; R. Edward Thomas; R. Edward Thomas

2005-01-01

ROMI-3 Rough-Mill Simulator is a software package that simulates current industrial practices for rip-first and chop-first lumber processing. This guide shows the user how to set up and examine the results of simulations of current or proposed mill practices. ROMI-3 accepts cutting bills with as many as 600 combined solid and/or panel part sizes. Plots of processed...

Need of risk management practice amongst bumiputera contractors in Malaysia construction industries

NASA Astrophysics Data System (ADS)

Syuhada Fadzil, Nur; Noor, Nurazuwa Md; Rahman, Ismail Abdul

2017-11-01

Malaysia construction industry has been growing continuously with double-digit growth for the past two decades. There are many issues surrounded the industry such as delay in delivery, cost overrun, quality and safety. In bumiputera contractor’s context, the literature review found that 32 issues were encountered in the construction project. These issues can be handled properly with the application of risk management. According to previous researchers, application of risk management in Malaysia construction industry is at the low level where it is implemented in traditional ways that are brainstorming and checklist. These were due to lack of knowledge, the high cost of hiring experts and avoiding extra cost. Besides that, this study also intentions to analyse the risk categories in the construction industry as well as identify risk management process to resolve the construction issues. Hence, this paper presents issues engulfed by Bumiputera contractors which can partly be resolved by applying risk management practice in carrying out the construction activity. This may inspire the contractors to apply the risk management practice in ensuring the success of their construction project.

Enzyme-based solutions for textile processing and dye contaminant biodegradation-a review.

PubMed

Chatha, Shahzad Ali Shahid; Asgher, Muhammad; Iqbal, Hafiz M N

2017-06-01

The textile industry, as recognized conformist and stake industry in the world's economy, is facing serious environmental challenges. In numerous industries, in practice, various chemical-based processes from initial sizing to final washing are fascinating harsh environment concerns. Some of these chemicals are corrosive to equipment and cause serious damage itself. Therefore, in the twenty-first century, chemical and allied industries quest a paradigm transition from traditional chemical-based concepts to a greener, sustainable, and environmentally friendlier catalytic alternative, both at the laboratory and industrial scales. Bio-based catalysis offers numerous benefits in the context of biotechnological industry and environmental applications. In recent years, bio-based processing has received particular interest among the scientist for inter- and multi-disciplinary investigations in the areas of natural and engineering sciences for the application in biotechnology sector at large and textile industries in particular. Different enzymatic processes such as chemical substitution have been developed or in the process of development for various textile wet processes. In this context, the present review article summarizes current developments and highlights those areas where environment-friendly enzymatic textile processing might play an increasingly important role in the textile industry. In the first part of the review, a special focus has been given to a comparative discussion of the chemical-based "classical/conventional" treatments and the modern enzyme-based treatment processes. Some relevant information is also reported to identify the major research gaps to be worked out in future.

WHAT DOESNT GET MEASURED - DOESNT GET DONE: IMPLEMENTING CONTINUOUS PROCESS IMPROVEMENT IN THE AIR FORCE RESERVE

DTIC Science & Technology

2016-04-01

Practical Problem Solving Method RMD Resource Management Decision ROI Return on Investment SECAF Secretary of the Air Force SECNAV Secretary of...AFSO21 and now AF CPI, this program seeks to train and certify an organic cadre of CPI practitioners to support the use of its standard problem solving ...process known as the AF Practical Problem Solving Method (PPSM) to solve mission critical process deficiencies. The PPSM leverages several industry

Overview of cleaner production as a result of clean technology research in Vietnam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sam, D.V.; Nhan, T.V.; Lan, N.N.

Vietnam is beginning its industrialization process, and it currently lacks the capital necessary for expensive pollution control and treatment systems. Pollution strategies are critical for the country. This study evaluates the present status of industry and the pollution problems associated with industrial development in Vietnam. The purpose of the study is to identify sectors that may have potential for promoting cleaner production practices. 4 refs.

Practical Aspects of Suspension Plasma Spray for Thermal Barrier Coatings on Potential Gas Turbine Components

NASA Astrophysics Data System (ADS)

Ma, X.; Ruggiero, P.

2018-04-01

Suspension plasma spray (SPS) process has attracted extensive efforts and interests to produce fine-structured and functional coatings. In particular, thermal barrier coatings (TBCs) applied by SPS process gain increasing interest due to its potential for superior thermal protection of gas turbine hot sections as compared to conventional TBCs. Unique columnar architectures and nano- and submicrometric grains in the SPS-TBC demonstrated some advantages of thermal shock durability, low thermal conductivity, erosion resistance and strain-tolerant microstructure. This work aimed to look into some practical aspects of SPS processing for TBC applications before it becomes a reliable industry method. The spray capability and applicability of SPS process to achieve uniformity thickness and microstructure on curved substrates were emphasized in designed spray trials to simulate the coating fabrication onto industrial turbine parts with complex configurations. The performances of the SPS-TBCs were tested in erosion, falling ballistic impact and indentational loading tests as to evaluate SPS-TBC performances in simulated turbine service conditions. Finally, a turbine blade was coated and sectioned to verify SPS sprayability in multiple critical sections. The SPS trials and test results demonstrated that SPS process is promising for innovative TBCs, but some challenges need to be addressed and resolved before it becomes an economic and capable industrial process, especially for complex turbine components.

Food Safety Practices in the Egg Products Industry.

PubMed

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

Temperature metrology

NASA Astrophysics Data System (ADS)

Fischer, J.; Fellmuth, B.

2005-05-01

The majority of the processes used by the manufacturing industry depend upon the accurate measurement and control of temperature. Thermal metrology is also a key factor affecting the efficiency and environmental impact of many high-energy industrial processes, the development of innovative products and the health and safety of the general population. Applications range from the processing, storage and shipment of perishable foodstuffs and biological materials to the development of more efficient and less environmentally polluting combustion processes for steel-making. Accurate measurement and control of temperature is, for instance, also important in areas such as the characterization of new materials used in the automotive, aerospace and semiconductor industries. This paper reviews the current status of temperature metrology. It starts with the determination of thermodynamic temperatures required on principle because temperature is an intensive quantity. Methods to determine thermodynamic temperatures are reviewed in detail to introduce the underlying physical basis. As these methods cannot usually be applied for practical measurements the need for a practical temperature scale for day-to-day work is motivated. The International Temperature Scale of 1990 and the Provisional Low Temperature Scale PLTS-2000 are described as important parts of the International System of Units to support science and technology. Its main importance becomes obvious in connection with industrial development and international markets. Every country is strongly interested in unique measures, in order to guarantee quality, reproducibility and functionability of products. The eventual realization of an international system, however, is only possible within the well-functioning organization of metrological laboratories. In developed countries the government established scientific institutes have certain metrological duties, as, for instance, the maintenance and dissemination of national units. For the base unit kelvin, this procedure is described in the sections on practical temperature scales, practical thermometry and reference standards. Testing experimentally the fundamental laws of physics means in practice the precise determination of the fundamental constants appearing in the laws. The essence of current activities is that prototypes, which may vary uncontrollably with time and location, are replaced by abstract experimental prescriptions that relate the units to the constants. This approach is shown for the definition of the kelvin and the Boltzmann constant. Dedicated to the occasion of the 60th birthday of Wolfgang Buck.

Safety cases for medical devices and health information technology: involving health-care organisations in the assurance of safety.

PubMed

Sujan, Mark A; Koornneef, Floor; Chozos, Nick; Pozzi, Simone; Kelly, Tim

2013-09-01

In the United Kingdom, there are more than 9000 reports of adverse events involving medical devices annually. The regulatory processes in Europe and in the United States have been challenged as to their ability to protect patients effectively from unreasonable risk and harm. Two of the major shortcomings of current practice include the lack of transparency in the safety certification process and the lack of involvement of service providers. We reviewed recent international standardisation activities in this area, and we reviewed regulatory practices in other safety-critical industries. The review showed that the use of safety cases is an accepted practice in UK safety-critical industries, but at present, there is little awareness of this concept in health care. Safety cases have the potential to provide greater transparency and confidence in safety certification and to act as a communication tool between manufacturers, service providers, regulators and patients.

DEVELOPMENT AND USE OF COMPUTER-AIDED PROCESS ENGINEERING TOOLS FOR POLLUTION PREVENTION

EPA Science Inventory

The use of Computer-Aided Process Engineering (CAPE) and process simulation tools has become established industry practice to predict simulation software, new opportunities are available for the creation of a wide range of ancillary tools that can be used from within multiple sim...

Quality improvement of polymer parts by laser welding

NASA Astrophysics Data System (ADS)

Puetz, Heidrun; Treusch, Hans-Georg; Welz, M.; Petring, Dirk; Beyer, Eckhard; Herziger, Gerd

1994-09-01

The growing significance of laser technology in industrial manufacturing is also observed in case of plastic industry. Laser cutting and marking are established processes. Laser beam welding is successfully practiced in processes like joining foils or winding reinforced prepregs. Laser radiation and its significant advantages of contactless and local heating could even be an alternative to conventional welding processes using heating elements, vibration or ultrasonic waves as energy sources. Developments in the field of laser diodes increase the interest in laser technology for material processing because in the near future they will represent an inexpensive energy source.

Meeting the Demand. The Needs of Vocational Education and Training Clients: An Overview.

ERIC Educational Resources Information Center

Billett, Stephen; Hayes, Sharon

A study examined needs of client groups--industry, enterprises, regions, and individuals--and their consequences for policy and practice within Australian vocational education and training (VET). The requirements for VET in the food processing and clerical industry sectors were examined in three regions across Australia. The study comprised five…

Alcoa North American Extrusions Implements Energy Use Assessments at Multiple Facilities: Office of Industrial Technologies (OIT) BestPractices Aluminum Assessment Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy

2001-08-05

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

Knowledge to Manage the Knowledge Society

ERIC Educational Resources Information Center

Minati, Gianfranco

2012-01-01

Purpose: The purpose of this research is to make evident the inadequateness of concepts and language based on industrial knowledge still used in current practices by managers to cope with problems of the post-industrial societies characterised by non-linear process of emergence and acquisition of properties. The purpose is to allow management to…

Birth Control in Clinical Trials: Industry Survey of Current Use Practices, Governance, and Monitoring.

PubMed

Stewart, J; Breslin, W J; Beyer, B K; Chadwick, K; De Schaepdrijver, L; Desai, M; Enright, B; Foster, W; Hui, J Y; Moffat, G J; Tornesi, B; Van Malderen, K; Wiesner, L; Chen, C L

2016-03-01

The Health and Environmental Sciences Institute (HESI) Developmental and Reproductive Toxicology Technical Committee sponsored a pharmaceutical industry survey on current industry practices for contraception use during clinical trials. The objectives of the survey were to improve our understanding of the current industry practices for contraception requirements in clinical trials, the governance processes set up to promote consistency and/or compliance with contraception requirements, and the effectiveness of current contraception practices in preventing pregnancies during clinical trials. Opportunities for improvements in current practices were also considered. The survey results from 12 pharmaceutical companies identified significant variability among companies with regard to contraception practices and governance during clinical trials. This variability was due primarily to differences in definitions, areas of scientific uncertainty or misunderstanding, and differences in company approaches to enrollment in clinical trials. The survey also revealed that few companies collected data in a manner that would allow a retrospective understanding of the reasons for failure of birth control during clinical trials. In this article, suggestions are made for topics where regulatory guidance or scientific publications could facilitate best practice. These include provisions for a pragmatic definition of women of childbearing potential, guidance on how animal data can influence the requirements for male and female birth control, evidence-based guidance on birth control and pregnancy testing regimes suitable for low- and high-risk situations, plus practical methods to ascertain the risk of drug-drug interactions with hormonal contraceptives.

Practical Use of Operation Data in the Process Industry

NASA Astrophysics Data System (ADS)

Kano, Manabu

This paper aims to reveal real problems in the process industry and introduce recent development to solve such problems from the viewpoint of effective use of operation data. Two topics are discussed: virtual sensor and process control. First, in order to clarify the present state and problems, a part of our recent questionnaire survey of process control is quoted. It is emphasized that maintenance is a key issue not only for soft-sensors but also for controllers. Then, new techniques are explained. The first one is correlation-based just-in-time modeling (CoJIT), which can realize higher prediction performance than conventional methods and simplify model maintenance. The second is extended fictitious reference iterative tuning (E-FRIT), which can realize data-driven PID control parameter tuning without process modeling. The great usefulness of these techniques are demonstrated through their industrial applications.

A primer on the cost of quality for improvement of laboratory and pathology specimen processes.

PubMed

Carlson, Richard O; Amirahmadi, Fazlollaah; Hernandez, James S

2012-09-01

In today's environment, many laboratories and pathology practices are challenged to maintain or increase their quality while simultaneously lowering their overall costs. The cost of improving specimen processes is related to quality, and we demonstrate that actual costs can be reduced by designing "quality at the source" into the processes. Various costs are hidden along the total testing process, and we suggest ways to identify opportunities to reduce cost by improving quality in laboratories and pathology practices through the use of Lean, Six Sigma, and industrial engineering.

2008 Mississippi Curriculum Framework: Postsecondary Practical Nursing. (Program CIP: 51.3901 - Licensed Practical/Vocational Nurse Training)

ERIC Educational Resources Information Center

McNutt, Jana; Clowers, Pat; Collum, Lara; Canton, Dixie; Comfort, Sherri; Kron, Maxine; Mahaffey, Elizabeth; Hancock, Jane; Waldrup, Sandra; Walker, Sherri; Pearson, Lisa; Miller, Kelly; Cooper, Patti; Bedwell, Susan

2008-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Conceptual and operational understanding of learning for sustainability: a case study of the beef industry in north-eastern Australia.

PubMed

Lankester, Ally J

2013-04-15

Extensive attention has been given to understanding learning processes that foster sustainability. Despite this focus there is still limited knowledge of learning processes that create changes in perspectives and practices. This paper aims to increase understanding of learning processes in the context of sustainability and refers to the beef industry in north-eastern Australia. A framework based on adult learning theories was developed and used to analyse the what, why and how of beef producers' learning to improve land condition. Twenty-eight producers were interviewed face-to-face and another 91 participated in a telephone survey. Most beef producers were motivated to learn due to perceived problems with existing practices and described mainly learning new skills and techniques to improve production. Beef producers main learning sources were their own experiences, observing others' practices and sharing experiences with peers and family members. Results showed that organised collective learning, adversity and active experimentation with natural resource management skills and techniques can facilitate critical reflection of practices, questioning of the self, others and cultural norms and an enhanced sense of environmental responsibility. Copyright © 2013 Elsevier Ltd. All rights reserved.

Patient-Reported Outcome (PRO) Consortium translation process: consensus development of updated best practices.

PubMed

Eremenco, Sonya; Pease, Sheryl; Mann, Sarah; Berry, Pamela

2017-01-01

This paper describes the rationale and goals of the Patient-Reported Outcome (PRO) Consortium's instrument translation process. The PRO Consortium has developed a number of novel PRO measures which are in the process of qualification by the U.S. Food and Drug Administration (FDA) for use in clinical trials where endpoints based on these measures would support product labeling claims. Given the importance of FDA qualification of these measures, the PRO Consortium's Process Subcommittee determined that a detailed linguistic validation (LV) process was necessary to ensure that all translations of Consortium-developed PRO measures are performed using a standardized approach with the rigor required to meet regulatory and pharmaceutical industry expectations, as well as having a clearly defined instrument translation process that the translation industry can support. The consensus process involved gathering information about current best practices from 13 translation companies with expertise in LV, consolidating the findings to generate a proposed process, and obtaining iterative feedback from the translation companies and PRO Consortium member firms on the proposed process in two rounds of review in order to update existing principles of good practice in LV and to provide sufficient detail for the translation process to ensure consistency across PRO Consortium measures, sponsors, and translation companies. The consensus development resulted in a 12-step process that outlines universal and country-specific new translation approaches, as well as country-specific adaptations of existing translations. The PRO Consortium translation process will play an important role in maintaining the validity of the data generated through these measures by ensuring that they are translated by qualified linguists following a standardized and rigorous process that reflects best practice.

Effects of industrial pre-freezing processing and freezing handling on glucosinolates and antioxidant attributes in broccoli florets.

PubMed

Cai, Congxi; Miao, Huiying; Qian, Hongmei; Yao, Leishuan; Wang, Bingliang; Wang, Qiaomei

2016-11-01

The effects of industrial pre-freezing processing and freezing handling on the contents of glucosinolates and antioxidants (vitamin C, polyphenols, carotenoid and chlorophyll), as well as the antioxidant capacity in broccoli (Brassica oleracea L. var. italica) florets were investigated in the present study. Our results showed that the glucosinolate accumulations were significantly decreased after pre-freezing processing, whereas elevated levels of phenols, carotenoids, chlorophyll, and also antioxidant capacity were observed in frozen broccoli florets. The contents of vitamin C remained constant during above mentioned processing. In conclusion, the current industrial freezing processing method is a good practice for the preservation of main antioxidant nutrients in broccoli florets, although some improvements in pre-freezing processing, such as steam blanching and ice-water cooling, are needed to attenuate the decrease in glucosinolate content. Copyright © 2016 Elsevier Ltd. All rights reserved.

Workplace Learning: Dilemmas for the European Steel Industry

ERIC Educational Resources Information Center

Stroud, Dean; Fairbrother, Peter

2006-01-01

The focus in recent studies of workplace learning has been on "communities of practice" and the ways that learning is shaped by such communities. In the process, there has been a downplaying of the importance of broader institutional arrangements, including the impact of organisational structures and management practice, as well as…

Challenges and prospects of xylitol production with whole cell bio-catalysis: A review.

PubMed

Dasgupta, Diptarka; Bandhu, Sheetal; Adhikari, Dilip K; Ghosh, Debashish

2017-04-01

Xylitol, as an alternative low calorie sweetener is well accepted in formulations of various confectioneries and healthcare products. Worldwide it is industrially produced by catalytic hydrogenation of pure d-xylose solution under high temperature and pressure. Biotechnological xylitol production is a potentially attractive replacement for chemical process, as it occurs under much milder process conditions and can be based on sugar mixtures derived from low-cost industrial and agri-waste. However, microbial fermentation route of xylitol production is not so far practiced industrially. This review highlights the challenges and prospects of biotechnological xylitol production considering possible genetic modifications of fermenting microorganisms and various aspects of industrial bioprocessing and product downstreaming. Copyright © 2017 Elsevier GmbH. All rights reserved.

Exploring Perceptions of Early-Career Psychiatrists About Their Relationships With the Pharmaceutical Industry.

PubMed

Stark, Thomas Johann; Brownell, Alvin Keith; Brager, Nancy Patricia; Berg, Amanda; Balderston, Rhea; Lockyer, Jocelyn Margot

2016-04-01

The pharmaceutical industry has engaged physicians through medical education, patient care, and medical research. New conflict of interest policy has highlighted the challenges to these relationships. The objective of this study was to explore the perceptions that early career psychiatrists (e.g. those within 5 years of entering practice) have regarding their relationship with the pharmaceutical industry. Data were collected through semi-structured interviews and were analysed using a grounded theory methodology. Interviews were conducted and analyzed in an iterative way using a constant comparison approach in which data were collected and open coded for themes and subthemes. As new interviews were conducted, the themes were applied to data along with emergent themes and previous interviews recoded until additional interviews failed to provide new themes and thematic saturation was achieved. Through axial coding, a process of relating codes (categories and concepts) to each other, the theory was generated to explain the core variable mediating perceptions participants had about the relationship with industry. The participants described increasing frequency of experiences with industry throughout training into practice. Their perceptions developed through training, physician culture, industry promotion, and their own practices. In managing the relationship with industry, participants would either avoid interactions or engage in behaviors aimed to reduce the risk of influence. Maintaining one's professional integrity was the underlying driver used to manage the relationship with industry. Psychiatrists develop perceptions about industry through experience and observation leading them to develop their own strategies to manage these relationships while maintaining their professional integrity.

An Intercompany Perspective on Biopharmaceutical Drug Product Robustness Studies.

PubMed

Morar-Mitrica, Sorina; Adams, Monica L; Crotts, George; Wurth, Christine; Ihnat, Peter M; Tabish, Tanvir; Antochshuk, Valentyn; DiLuzio, Willow; Dix, Daniel B; Fernandez, Jason E; Gupta, Kapil; Fleming, Michael S; He, Bing; Kranz, James K; Liu, Dingjiang; Narasimhan, Chakravarthy; Routhier, Eric; Taylor, Katherine D; Truong, Nobel; Stokes, Elaine S E

2018-02-01

The Biophorum Development Group (BPDG) is an industry-wide consortium enabling networking and sharing of best practices for the development of biopharmaceuticals. To gain a better understanding of current industry approaches for establishing biopharmaceutical drug product (DP) robustness, the BPDG-Formulation Point Share group conducted an intercompany collaboration exercise, which included a bench-marking survey and extensive group discussions around the scope, design, and execution of robustness studies. The results of this industry collaboration revealed several key common themes: (1) overall DP robustness is defined by both the formulation and the manufacturing process robustness; (2) robustness integrates the principles of quality by design (QbD); (3) DP robustness is an important factor in setting critical quality attribute control strategies and commercial specifications; (4) most companies employ robustness studies, along with prior knowledge, risk assessments, and statistics, to develop the DP design space; (5) studies are tailored to commercial development needs and the practices of each company. Three case studies further illustrate how a robustness study design for a biopharmaceutical DP balances experimental complexity, statistical power, scientific understanding, and risk assessment to provide the desired product and process knowledge. The BPDG-Formulation Point Share discusses identified industry challenges with regard to biopharmaceutical DP robustness and presents some recommendations for best practices. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Pedagogical Approaches to Cooperative Education in South Africa: A Work-Integrated Learning Model for the Public Relations Industry

ERIC Educational Resources Information Center

Rampersad, Renitha

2010-01-01

The pedagogy relevant to work-integrated learning (WIL) has formed a significant component of most educational processes and has become a necessity for the public relations industry in South Africa. Properly planned, designed and monitored programmes expose students to professional culture and workplace practice. This paper outlines the pedagogy…

A review of the solar array manufacturing industry costing standards

NASA Technical Reports Server (NTRS)

1977-01-01

The solar array manufacturing industry costing standards model is designed to compare the cost of producing solar arrays using alternative manufacturing processes. Constructive criticism of the methodology used is intended to enhance its implementation as a practical design tool. Three main elements of the procedure include workbook format and presentation, theoretical model validity and standard financial parameters.

Applying Peer Reviews in Software Engineering Education: An Experiment and Lessons Learned

ERIC Educational Resources Information Center

Garousi, V.

2010-01-01

Based on the demonstrated value of peer reviews in the engineering industry, numerous industry experts have listed it at the top of the list of desirable development practices. Experience has shown that problems (defects) are eliminated earlier if a development process incorporates peer reviews and that these reviews are as effective as or even…

Introduction: Institutional corruption and the pharmaceutical policy.

PubMed

Rodwin, Marc A

2013-01-01

Today, the goals of pharmaceutical policy and medical practice are often undermined due to institutional corruption - that is, widespread or systemic practices, usually legal, that undermine an institution's objectives or integrity. In this symposium, 16 articles investigate the corruption of pharmaceutical policy, each taking a different look at the sources of corruption, how it occurs, and what is corrupted. We will see that the pharmaceutical industry's own purposes are often undermined. Furthermore, pharmaceutical industry funding of election campaigns and lobbying skews the legislative process that sets pharmaceutical policy. Moreover, certain practices have corrupted medical research, the production of medical knowledge, the practice of medicine, drug safety, the Food and Drug Administration's oversight of the pharmaceutical market, and the trustworthiness of patient advocacy organizations. © 2013 American Society of Law, Medicine & Ethics, Inc.

Closing the Gap Between Process Control Theory and Practice

ERIC Educational Resources Information Center

Velazquez, Carlos; Cardona-Martinez, Nelson; Velazquez, Edwin

2010-01-01

The pressure on world-wide manufacturing industries to meet tougher demands and regulations has forced companies to focus on improving manufacturing using tools like process automation. This focus requires better-prepared students. The process control course of the Department of Chemical Engineering at the University of Puerto Rico at Mayaguez has…

Process Correlation Analysis Model for Process Improvement Identification

PubMed Central

Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data. PMID:24977170

Process correlation analysis model for process improvement identification.

PubMed

Choi, Su-jin; Kim, Dae-Kyoo; Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data.

Discussion on the Development of Green Chemistry and Chemical Engineering

NASA Astrophysics Data System (ADS)

Zhang, Yunshen

2017-11-01

Chemical industry plays a vital role in the development process of national economy. However, in view of the special nature of the chemical industry, a large number of poisonous and harmful substances pose a great threat to the ecological environment and human health in the entire process of raw material acquisition, production, transportation, product manufacturing, and the final practical application. Therefore, it is a general trend to promote the development of chemistry and chemical engineering towards a greener environment. This article will focus on some basic problems occurred in the development process of green chemistry and chemical engineering.

Machine vision 1992-1996: technology program to promote research and its utilization in industry

NASA Astrophysics Data System (ADS)

Soini, Antti J.

1994-10-01

Machine vision technology has got a strong interest in Finnish research organizations, which is resulting in many innovative products to industry. Despite this end users were very skeptical towards machine vision and its robustness for harsh industrial environments. Therefore Technology Development Centre, TEKES, who funds technology related research and development projects in universities and individual companies, decided to start a national technology program, Machine Vision 1992 - 1996. Led by industry the program boosts research in machine vision technology and seeks to put the research results to work in practical industrial applications. The emphasis is in nationally important, demanding applications. The program will create new industry and business for machine vision producers and encourage the process and manufacturing industry to take advantage of this new technology. So far 60 companies and all major universities and research centers are working on our forty different projects. The key themes that we have are process control, robot vision and quality control.

Photonic crystal fibre for industrial laser delivery

NASA Astrophysics Data System (ADS)

O'Driscoll, E. J.; McDonald, J.; Morgan, S.; Simpson, G.; Sidhu, J.; Baggett, J. C.; Hayes, J. R.; Petrovich, M. N.; Finazzi, V.; Polletti, F.; Richardson, D. J.; Horley, R.; Harker, A.; Grunewald, P.; Allott, R.; Judd, E.

2006-12-01

Fiber delivery of intense laser radiation is important for a broad range of application sectors, from medicine through to industrial laser processing of materials, and offers many practical system benefits relative to free space solutions. In recent years, photonic crystal fiber technology has revolutionized the dynamic field of optical fibers, bringing with them a wide range of novel optical properties that make them ideally suited to power delivery with unparalleled control over the beam properties. The DTI funded project: Photonic Fibers for Industrial beam DELivery (PFIDEL), aims to develop novel fiber geometries for use as a delivery system for high power industrial lasers and to assess their potential in a range of "real" industrial applications. In this paper we review, from an industrial laser user perspective, the advantages of each of the fibers studied under PFIDEL. We present results of application demonstrations and discuss how these fibers can positively impact the field of industrial laser systems and processes, in particular for direct write and micromachining applications.

Design Studio.

ERIC Educational Resources Information Center

Draze, Dianne; Palouda, Annelise

This book presents information about 10 areas of design, with the main emphasis on graphic design. One section presents the creative problem solving process and provides practice in using this process to solve design problems. Students are given a glimpse of other areas of design, including fashion, industrial, architectural, decorative,…

Curriculum Development Based On INQF and Business/Industries Sector for Improvement Competency of Basic Pattern Making Students at Vocational High School

NASA Astrophysics Data System (ADS)

Nilasari, Yoni; Dasining

2018-04-01

In this era of globalization, every human resource is faced with a competitive climate that will have a major impact on the development of the business and industrial sector. Therefore it is deemed necessary to research the development of curriculum based on INQF and the business/industries sector in order to improve the competence of Sewing Technique for Vocational High School Students of fashion clothing program. The development of curricula based on INQF and the business/industries is an activity to produce a curriculum that suits the needs of the business and industries sector. The formulation of the problem in this research are: (1) what is the curriculum based on INQF and the business/industries sector?; (2) how is the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sector?; And (3) how the result of the curriculum of fashion expertise based on INQF and the business/industries sector. The aims of research are: (1) explain what is meant by curriculum based on INQF and business/industries sector; (2) to know the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sectors ; And (3) to know result the curriculum of clothing expertise based on INQF and the business/industries sector. The research method chosen in developing curriculum based on INQFand business/industry sector is using by 4-D model from Thiagarajan, which includes: (1) define; (2) design; (3) development; And (4) disseminate. Step 4, not done but in this study. The result of the research shows that: (1) the curriculum based on INQF and the business/industries sector is the curriculum created by applying the principles and procedures of the Indonesian National Qualification Framework (INQF) that will improve the quality of graduates of Vocational High School level 2, and establish cooperation with Business/industries as a guest teacher (counselor) in the learning process; (2) process and procedure of curriculum development of fashion program profession based on INQF and business/industries sector is process and procedure of curriculum development of fashion program profession based on INQF and business/industries sector there are several stages: feasibility study and requirement, preparation of initial concept of curriculum planning based on INQF and the business/industries sector in the field of fashion, as well as the development of a plan to implement the curriculum based on INQF and the business/industries sector in the field of fashion, this development will produce a curriculum of fashion proficiency program in the form of learning competency of sewing technology where the implementer of learning (counselor) Is a guest teacher from business/industries sector. (3) the learning device validity aspect earns an average score of 3.5 with very valid criteria and the practicality aspect of the device obtains an average score of 3.3 with practical criteria.

Student Selection and Admission to Higher Education: Policies and Practices in the Asian Region.

ERIC Educational Resources Information Center

Harman, Grant

1994-01-01

This article describes higher education student selection and admission policies and practices in newly industrialized countries in the Asian region, with particular attention to access, selection, the admissions process, equity, and relationship with the labor market. Policies in India, Indonesia, Malaysia, People's Republic of China, Singapore,…

The practice of pre-marketing safety assessment in drug development.

PubMed

Chuang-Stein, Christy; Xia, H Amy

2013-01-01

The last 15 years have seen a substantial increase in efforts devoted to safety assessment by statisticians in the pharmaceutical industry. While some of these efforts were driven by regulations and public demand for safer products, much of the motivation came from the realization that there is a strong need for a systematic approach to safety planning, evaluation, and reporting at the program level throughout the drug development life cycle. An efficient process can help us identify safety signals early and afford us the opportunity to develop effective risk minimization plan early in the development cycle. This awareness has led many pharmaceutical sponsors to set up internal systems and structures to effectively conduct safety assessment at all levels (patient, study, and program). In addition to process, tools have emerged that are designed to enhance data review and pattern recognition. In this paper, we describe advancements in the practice of safety assessment during the premarketing phase of drug development. In particular, we share examples of safety assessment practice at our respective companies, some of which are based on recommendations from industry-initiated working groups on best practice in recent years.

Applying industrial process improvement techniques to increase efficiency in a surgical practice.

PubMed

Reznick, David; Niazov, Lora; Holizna, Eric; Siperstein, Allan

2014-10-01

The goal of this study was to examine how industrial process improvement techniques could help streamline the preoperative workup. Lean process improvement was used to streamline patient workup at an endocrine surgery service at a tertiary medical center utilizing multidisciplinary collaboration. The program consisted of several major changes in how patients are processed in the department. The goal was to shorten the wait time between initial call and consult visit and between consult and surgery. We enrolled 1,438 patients enrolled in the program. The wait time from the initial call until consult was reduced from 18.3 ± 0.7 to 15.4 ± 0.9 days. Wait time from consult until operation was reduced from 39.9 ± 1.5 to 33.9 ± 1.3 days for the overall practice and to 15.0 ± 4.8 days for low-risk patients. Patient cancellations were reduced from 27.9 ± 2.4% to 17.3 ± 2.5%. Overall patient flow increased from 30.9 ± 5.1 to 52.4 ± 5.8 consults per month (all P < .01). Utilizing process improvement methodology, surgery patients can benefit from an improved, streamlined process with significant reduction in wait time from call to initial consult and initial consult to surgery, with reduced cancellations. This generalized process has resulted in increased practice throughput and efficiency and is applicable to any surgery practice. Copyright © 2014 Elsevier Inc. All rights reserved.

Analysis of flight equipment purchasing practices of representative air carriers

NASA Technical Reports Server (NTRS)

1977-01-01

The process through which representative air carriers decide whether or not to purchase flight equipment was investigated as well as their practices and policies in retiring surplus aircraft. An analysis of the flight equipment investment decision process in ten airlines shows that for the airline industry as a whole, the flight equipment investment decision is in a state of transition from a wholly informal process in earliest years to a much more organized and structured process in the future. Individual air carriers are in different stages with respect to the formality and sophistication associated with the flight equipment investment decision.

PDA survey of quality risk management practices in the pharmaceutical, devices, & biotechnology industries.

PubMed

Ahmed, Ruhi; Baseman, Harold; Ferreira, Jorge; Genova, Thomas; Harclerode, William; Hartman, Jeffery; Kim, Samuel; Londeree, Nanette; Long, Michael; Miele, William; Ramjit, Timothy; Raschiatore, Marlene; Tomonto, Charles

2008-01-01

In July 2006 the Parenteral Drug Association's Risk Management Task Force for Aseptic Processes, conducted an electronic survey of PDA members to determine current industry practices regarding implementation of Quality Risk Management in their organizations. This electronic survey was open and publicly available via the PDA website and targeted professionals in our industry who are involved in initiating, implementing, or reviewing risk management programs or decisions in their organizations. One hundred twenty-nine members participated and their demographics are presented in the sidebar "Correspondents Profile". Among the major findings are: *The "Aseptic Processing/Filling" operation is the functional area identified as having the greatest need for risk assessment and quality risk management. *The most widely used methodology in industry to identify risk is Failure Mode and Effects Analysis (FMEA). This tool was most widely applied in assessing change control and for adverse event, complaint, or failure investigations. *Despite the fact that personnel training was identified as the strategy most used for controlling/minimizing risk, the largest contributors to sterility failure in operations are still "Personnel". *Most companies still rely on "Manufacturing Controls" to mitigate risk and deemed the utilization of Process Analytical Technology (PAT) least important in this aspect. *A majority of correspondents verified that they did not periodically assess their risk management programs. *A majority of the correspondents desired to see case studies or examples of risk analysis implementation (as applicable to aseptic processing) in future PDA technical reports on risk management.

An empirical comparison between the board's strategic role in nonprofit hospitals and in for-profit industrial firms.

PubMed Central

Judge, W Q; Zeithaml, C P

1992-01-01

As the health care environment becomes more competitive, nonprofit hospitals are under pressure to adopt for-profit business practices. Based on an extensive field study, this research examines the central issue of organizational governance by comparing the strategic roles of nonprofit hospital boards with for-profit industrial boards. The results show that nonprofit hospital boards are generally more involved in the strategic decision process than their for-profit counterparts. If this governance activity is seen as desirable, hospital boards should exercise caution in emulating for-profit board practices. PMID:1563953

Using quality experts from manufacturing to transform primary care.

PubMed

Steiner, Rose M; Walsworth, David T

2010-01-01

Improving Performance in Practice (IPIP) is an initiative convened by the American Board of Medical Specialties. It investigates the efficacy of coaches in helping primary-care practices improve the care of patients with diabetes and asthma. Most IPIP states use coaches who have a health care background, and are trained in quality and process improvement. Michigan uses quality experts from the manufacturing industry who are educated regarding the health care environment, which enables them to perform as quality-improvement coaches (QICs) in primary-care practices. In this case study, ninety-six quality experts were trained to coach primary-care practices, with 53 currently assigned to offices, and others assisting as needed. Practice teams and QICs identify gaps in care and office practices with the use of assorted quality-improvement tools. Reports are made monthly to describe clinical and process measures and methods used. Michigan has 33 practices engaged, involving 205 physicians and 40 midlevel providers. The teaming of quality experts from the manufacturing industry with primary-care office providers and staff resulted in office efficiency, improved care provided, and progress toward attainment of a patient-centered medical home (PCMH). Quality experts from manufacturing volunteered to coach for improvements in primary care. The efforts of QICs have been successful. Because the QICs are volunteers, sustainability of the Michigan Improving Performance in Practice program is a challenge.

Get Funded! A Practical Guide for Scholars Seeking Research Support from Business.

ERIC Educational Resources Information Center

Schumacher, Dorin

This book is a guide to seeking and obtaining funding for research from corporate industry sources. The process outlined in the book can be used by researchers of any discipline in any type of research institution. Part 1 discusses the key to getting industrial support, developing good interpersonal relationships with people in companies. Part 2…

Win, Lose, Draw: The Grievance Process in Practice.

ERIC Educational Resources Information Center

Dalton, Dan R.; Todor, William D.

1981-01-01

Discusses types of grievances in American industrial relations, their costs, and ways of resolving them. Accompanying tables indicate the frequency of different categories of grievances and resolutions. (Author/WD)

Energy determination in industrial X-ray processing facilities

NASA Astrophysics Data System (ADS)

Cleland, M. R.; Gregoire, O.; Stichelbaut, F.; Gomola, I.; Galloway, R. A.; Schlecht, J.

2005-12-01

In industrial irradiation facilities, the determination of maximum photon or electron energy is important for regulated processes, such as food irradiation, and for assurance of treatment reproducibility. With electron beam irradiators, this has been done by measuring the depth-dose distribution in a homogeneous material. For X-ray irradiators, an analogous method has not yet been recommended. This paper describes a procedure suitable for typical industrial irradiation processes, which is based on common practice in the field of therapeutic X-ray treatment. It utilizes a measurement of the slope of the exponential attenuation curve of X-rays in a thick stack of polyethylene plates. Monte Carlo simulations and experimental tests have been performed to verify the suitability and accuracy of the method between 3 MeV and 8 MeV.

[Microbiological assessment of the Gouda-type cheese-making process in a Venezuelan industry].

PubMed

Dáivila, Jacqueline; Reyes, Genara; Corzo, Otoniel

2006-03-01

The adoption of the Hazard Analysis and Critical Control Point (HACCP) system is necessary to assure the safety of the product in the cheese-making industry. The compliment of pre-requisite programs as Good Manufacture Practices (GMPs) and Sanitation Standard Operating Procedures (SSOPs) are required before the implementation of the HACCP plan. GMPs are the standards related to equipments, tools, personnel, etc. SSOPs are the procedures related to hygiene and sanitation of the plant and workers. The aim of this study was to assess the compliment of the pre-requisite programs and the microbiological conditions of the Gouda type cheese-making process in a Venezuelan processing plant before designing a HACCP plan. Samples were: (a) raw milk, pasteurized milk, curd and ripened cheese, (b) water, (c) environment of the production areas and ripening premises, (d) equipments before and after sanitation, (e) food handlers. Microbiological analyses were done according to COVENIN standards. This study showed that even though pasteurization process was effective to kill pathogen bacteria of the raw milk and the water was safe, however there are deficient manufacture practices in the hygiene as well as in sanitation of the plant and food handlers. Prerequisite programs (GMP-SSOP) of this industry need to be well established, controlled and evaluated.

Total Quality Management in Logistics: A Case Study from the Trucking Industry

DTIC Science & Technology

1992-06-01

Quality Management (TQM) movement on the logistics industry as a whole, and, more specifically, its impact within the trucking industry. Its focus then narrows to study the practical aspects of implementing a W. Edwards Deming-based quality program within a particular trucking company, Mason Transporters, Inc. The effectiveness of the company’s implementation effort is assessed using data collected from a survey questionnaire, formal interviews, and personal observations during an on- site visit. Successes and shortcomings of the implementation process are highlighted

Cyber security best practices for the nuclear industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badr, I.

2012-07-01

When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

Performance Improvement Processes.

ERIC Educational Resources Information Center

1997

This document contains four papers from a symposium on performance improvement processes. In "Never the Twain Shall Meet?: A Glimpse into High Performance Work Practices and Downsizing" (Laurie J. Bassi, Mark E. Van Buren) evidence from a national cross-industry of more than 200 establishments is used to demonstrate that high-performance…

From bad pharma to good pharma: aligning market forces with good and trustworthy practices through accreditation, certification, and rating.

PubMed

Miller, Jennifer E

2013-01-01

This article explores whether the bioethical performance and trustworthiness of pharmaceutical companies can be improved by harnessing market forces through the use of accreditation, certification, or rating. Other industries have used such systems to define best practices, set standards, and assess and signal the quality of services, processes, and products. These systems have also informed decisions in other industries about where to invest, what to buy, where to work, and when to regulate. Similarly, accreditation, certification, and rating programs can help drug companies address stakeholder concerns in four areas: clinical trial design and management, dissemination of clinical trial results, marketing practices, and the accessibility of medicines. To illuminate processes - such as conflicts of interests and revolving-door policies - that can jeopardize the integrity of accreditation, certification, and ratings systems, the article concludes with a consideration of recent failures of credit-rating agencies and a review of the regulatory capture literature. © 2013 American Society of Law, Medicine & Ethics, Inc.

Food Safety Practices in the U.S. Meat Slaughter and Processing Industry: Changes from 2005 to 2015.

PubMed

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K

2017-08-01

Meat slaughter establishments use a multipronged approach to ensure beef and pork products are safe for human consumption. To determine the approaches most commonly used, we conducted a national survey of federally inspected meat slaughter and processing establishments (376 completed surveys, 66% response rate) in 2015. We compared the results with a survey that was conducted in 2005, albeit of potentially different establishments, by using a similar questionnaire and similar data collection methods, thus allowing for an evaluation of trends in food safety practices over time. The use of some food safety practices has increased over the 10-yr time period, whereas others remained the same or decreased. For example, the use of chemical sanitizers or hot water for food contact surfaces and tools increased from 51 to 93%. As another example, microbiological testing of raw meat after fabrication, in addition to that required by regulation, increased from 50 to 72%. However, the use of organic acid rinse on carcasses in the slaughter area remained the same, at 66% of establishments. Written policies and procedures to control the use of hazardous chemicals decreased from 75 to 65% of establishments. The survey findings can be used to characterize food safety practices and technologies in the meat slaughter and processing industry and identify areas for improvement.

Improving Video Game Development: Facilitating Heterogeneous Team Collaboration through Flexible Software Processes

NASA Astrophysics Data System (ADS)

Musil, Juergen; Schweda, Angelika; Winkler, Dietmar; Biffl, Stefan

Based on our observations of Austrian video game software development (VGSD) practices we identified a lack of systematic processes/method support and inefficient collaboration between various involved disciplines, i.e. engineers and artists. VGSD includes heterogeneous disciplines, e.g. creative arts, game/content design, and software. Nevertheless, improving team collaboration and process support is an ongoing challenge to enable a comprehensive view on game development projects. Lessons learned from software engineering practices can help game developers to increase game development processes within a heterogeneous environment. Based on a state of the practice survey in the Austrian games industry, this paper presents (a) first results with focus on process/method support and (b) suggests a candidate flexible process approach based on Scrum to improve VGSD and team collaboration. Results showed (a) a trend to highly flexible software processes involving various disciplines and (b) identified the suggested flexible process approach as feasible and useful for project application.

A Government/Industry Summary of the Design Analysis Methods for Vibrations (DAMVIBS) Program

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G. (Compiler)

1993-01-01

The NASA Langley Research Center in 1984 initiated a rotorcraft structural dynamics program, designated DAMVIBS (Design Analysis Methods for VIBrationS), with the objective of establishing the technology base needed by the rotorcraft industry for developing an advanced finite-element-based dynamics design analysis capability for vibrations. An assessment of the program showed that the DAMVIBS Program has resulted in notable technical achievements and major changes in industrial design practice, all of which have significantly advanced the industry's capability to use and rely on finite-element-based dynamics analyses during the design process.

Taming wild yeast: potential of conventional and nonconventional yeasts in industrial fermentations.

PubMed

Steensels, Jan; Verstrepen, Kevin J

2014-01-01

Yeasts are the main driving force behind several industrial food fermentation processes, including the production of beer, wine, sake, bread, and chocolate. Historically, these processes developed from uncontrolled, spontaneous fermentation reactions that rely on a complex mixture of microbes present in the environment. Because such spontaneous processes are generally inconsistent and inefficient and often lead to the formation of off-flavors, most of today's industrial production utilizes defined starter cultures, often consisting of a specific domesticated strain of Saccharomyces cerevisiae, S. bayanus, or S. pastorianus. Although this practice greatly improved process consistency, efficiency, and overall quality, it also limited the sensorial complexity of the end product. In this review, we discuss how Saccharomyces yeasts were domesticated to become the main workhorse of food fermentations, and we investigate the potential and selection of nonconventional yeasts that are often found in spontaneous fermentations, such as Brettanomyces, Hanseniaspora, and Pichia spp.

IEC 61511 and the capital project process--a protective management system approach.

PubMed

Summers, Angela E

2006-03-17

This year, the process industry has reached an important milestone in process safety-the acceptance of an internationally recognized standard for safety instrumented systems (SIS). This standard, IEC 61511, documents good engineering practice for the assessment, design, operation, maintenance, and management of SISs. The foundation of the standard is established by several requirements in Part 1, Clauses 5-7, which cover the development of a management system aimed at ensuring that functional safety is achieved. The management system includes a quality assurance process for the entire SIS lifecycle, requiring the development of procedures, identification of resources and acquisition of tools. For maximum benefit, the deliverables and quality control checks required by the standard should be integrated into the capital project process, addressing safety, environmental, plant productivity, and asset protection. Industry has become inundated with a multitude of programs focusing on safety, quality, and cost performance. This paper introduces a protective management system, which builds upon the work process identified in IEC 61511. Typical capital project phases are integrated with the management system to yield one comprehensive program to efficiently manage process risk. Finally, the paper highlights areas where internal practices or guidelines should be developed to improve program performance and cost effectiveness.

Visible light photocatalysis as a greener approach to photochemical synthesis.

PubMed

Yoon, Tehshik P; Ischay, Michael A; Du, Juana

2010-07-01

Light can be considered an ideal reagent for environmentally friendly, 'green' chemical synthesis; unlike many conventional reagents, light is non-toxic, generates no waste, and can be obtained from renewable sources. Nevertheless, the need for high-energy ultraviolet radiation in most organic photochemical processes has limited both the practicality and environmental benefits of photochemical synthesis on industrially relevant scales. This perspective describes recent approaches to the use of metal polypyridyl photocatalysts in synthetic organic transformations. Given the remarkable photophysical properties of these complexes, these new transformations, which use Ru(bpy)(3)(2+) and related photocatalysts, can be conducted using almost any source of visible light, including both store-bought fluorescent light bulbs and ambient sunlight. Transition metal photocatalysis thus represents a promising strategy towards the development of practical, scalable industrial processes with great environmental benefits.

Birth Control in Clinical Trials

PubMed Central

Stewart, J.; Beyer, B. K.; Chadwick, K.; De Schaepdrijver, L.; Desai, M.; Enright, B.; Foster, W.; Hui, J. Y.; Moffat, G. J.; Tornesi, B.; Van Malderen, K.; Wiesner, L.; Chen, C. L.

2015-01-01

The Health and Environmental Sciences Institute (HESI) Developmental and Reproductive Toxicology Technical Committee sponsored a pharmaceutical industry survey on current industry practices for contraception use during clinical trials. The objectives of the survey were to improve our understanding of the current industry practices for contraception requirements in clinical trials, the governance processes set up to promote consistency and/or compliance with contraception requirements, and the effectiveness of current contraception practices in preventing pregnancies during clinical trials. Opportunities for improvements in current practices were also considered. The survey results from 12 pharmaceutical companies identified significant variability among companies with regard to contraception practices and governance during clinical trials. This variability was due primarily to differences in definitions, areas of scientific uncertainty or misunderstanding, and differences in company approaches to enrollment in clinical trials. The survey also revealed that few companies collected data in a manner that would allow a retrospective understanding of the reasons for failure of birth control during clinical trials. In this article, suggestions are made for topics where regulatory guidance or scientific publications could facilitate best practice. These include provisions for a pragmatic definition of women of childbearing potential, guidance on how animal data can influence the requirements for male and female birth control, evidence-based guidance on birth control and pregnancy testing regimes suitable for low- and high-risk situations, plus practical methods to ascertain the risk of drug-drug interactions with hormonal contraceptives. PMID:27042398

Hybrid intelligent control of substrate feeding for industrial fed-batch chlortetracycline fermentation process.

PubMed

Jin, Huaiping; Chen, Xiangguang; Yang, Jianwen; Wu, Lei; Wang, Li

2014-11-01

The lack of accurate process models and reliable online sensors for substrate measurements poses significant challenges for controlling substrate feeding accurately, automatically and optimally in fed-batch fermentation industries. It is still a common practice to regulate the feeding rate based upon manual operations. To address this issue, a hybrid intelligent control method is proposed to enable automatic substrate feeding. The resulting control system consists of three modules: a presetting module for providing initial set-points; a predictive module for estimating substrate concentration online based on a new time interval-varying soft sensing algorithm; and a feedback compensator using expert rules. The effectiveness of the proposed approach is demonstrated through its successful applications to the industrial fed-batch chlortetracycline fermentation process. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Industrial applications of nanoparticles.

PubMed

Stark, W J; Stoessel, P R; Wohlleben, W; Hafner, A

2015-08-21

Research efforts in the past two decades have resulted in thousands of potential application areas for nanoparticles - which materials have become industrially relevant? Where are sustainable applications of nanoparticles replacing traditional processing and materials? This tutorial review starts with a brief analysis on what makes nanoparticles attractive to chemical product design. The article highlights established industrial applications of nanoparticles and then moves to rapidly emerging applications in the chemical industry and discusses future research directions. Contributions from large companies, academia and high-tech start-ups are used to elucidate where academic nanoparticle research has revolutionized industry practice. A nanomaterial-focused analysis discusses new trends, such as particles with an identity, and the influence of modern instrument advances in the development of novel industrial products.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klepper, O.H.

One of the major obstacles to extensive application of nuclear power to industrial heat is the difference between the relatively small energy requirements of individual industrial plants and the large thermal capacity of current power reactors. A practical way of overcoming this obstacle would be to operate a centrally located dual-purpose power plant that would furnish process steam to a cluster of industrial plants, in addition to generating electrical power. The present study indicates that even relatively remote industrial plants could be served by the power plant, since it might be possible to convey steam economically as much as tenmore » miles or more. A survey of five major industries indicates a major potential market for industrial steam from large nuclear power stations.« less

Putting HR outsourcing into practice.

PubMed

Berger, Michael

2007-01-01

Faced with the time-consuming responsibility of human resources (HR) management, a growing number of medical practices are outsourcing their HR to professional employer organizations (PEOs) so they can concentrate on their core business. A PEO functions as an HR department-minus the high overhead-managing daily administrative tasks such as payroll processing and related tax filings, employee benefits, and workers' compensation coverage and claims resolution. PEOs help physicians' offices keep up with the piles of paperwork that never seem to shrink, freeing doctors to focus on patient care and building their practice. Because of their volume buying power, PEOs are able to offer employees of small medical practices big-company benefits-everything from health, dental, and vision coverage to long-term disability insurance and tuition assistance. A fledgling industry only a decade ago, HR outsourcing has morphed into a blossoming industry. Enlisting the services of a PEO is now considered de rigueur in many small business circles.

An overview of knowledge management (KM) issues for implementation in consultant firms in Malaysian construction industry

NASA Astrophysics Data System (ADS)

Othman, Azlan; Ismail, Syuhaida; Yahya, Khairulzan

2017-12-01

In the past few years, there has been a growing interest in treating knowledge as a significant organisational resource. Thus, effective development and implementation of KM requires a foundation in several rich literatures. As a preparation for the competitive industrial nation, KM is an important countenance that should be the point of convergence for the industry players. This paper wishes to draw the attention on the current situation of KM practice, focusing on consultant firms in Malaysian construction industry. Questionnaires were distributed to about 200 respondents working in the industry, with the objective of appraising the KM implementation amongst consultant firms working in construction industry in Malaysia. This paper also gives the overview on KM definition, process, understanding and challenges in construction industry, besides the critical success factor of KM implementation. The literature is restricted on the recent KM study of 17 years research from 2000 to 2017. Finally, this paper proposes the conceptual ideas of relationship between KM process, KM understanding and KM challenges with critical success factor of KM implementation.

Quantitative microbiological risk assessment in food industry: Theory and practical application.

PubMed

Membré, Jeanne-Marie; Boué, Géraldine

2018-04-01

The objective of this article is to bring scientific background as well as practical hints and tips to guide risk assessors and modelers who want to develop a quantitative Microbiological Risk Assessment (MRA) in an industrial context. MRA aims at determining the public health risk associated with biological hazards in a food. Its implementation in industry enables to compare the efficiency of different risk reduction measures, and more precisely different operational settings, by predicting their effect on the final model output. The first stage in MRA is to clearly define the purpose and scope with stakeholders, risk assessors and modelers. Then, a probabilistic model is developed; this includes schematically three important phases. Firstly, the model structure has to be defined, i.e. the connections between different operational processing steps. An important step in food industry is the thermal processing leading to microbial inactivation. Growth of heat-treated surviving microorganisms and/or post-process contamination during storage phase is also important to take into account. Secondly, mathematical equations are determined to estimate the change of microbial load after each processing step. This phase includes the construction of model inputs by collecting data or eliciting experts. Finally, the model outputs are obtained by simulation procedures, they have to be interpreted and communicated to targeted stakeholders. In this latter phase, tools such as what-if scenarios provide an essential added value. These different MRA phases are illustrated through two examples covering important issues in industry. The first one covers process optimization in a food safety context, the second one covers shelf-life determination in a food quality context. Although both contexts required the same methodology, they do not have the same endpoint: up to the human health in the foie gras case-study illustrating here a safety application, up to the food portion in the brioche case-study illustrating here a quality application. Copyright © 2017 Elsevier Ltd. All rights reserved.

29 CFR 1910.333 - Selection and use of work practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... continuous industrial process in a chemical plant that would otherwise need to be completely shut down in... chains, necklaces, metalized aprons, cloth with conductive thread, or metal headgear) may not be worn if...

29 CFR 1910.333 - Selection and use of work practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... continuous industrial process in a chemical plant that would otherwise need to be completely shut down in... chains, necklaces, metalized aprons, cloth with conductive thread, or metal headgear) may not be worn if...

29 CFR 1910.333 - Selection and use of work practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... continuous industrial process in a chemical plant that would otherwise need to be completely shut down in... chains, necklaces, metalized aprons, cloth with conductive thread, or metal headgear) may not be worn if...

29 CFR 1910.333 - Selection and use of work practices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... continuous industrial process in a chemical plant that would otherwise need to be completely shut down in... chains, necklaces, metalized aprons, cloth with conductive thread, or metal headgear) may not be worn if...

29 CFR 1910.333 - Selection and use of work practices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... continuous industrial process in a chemical plant that would otherwise need to be completely shut down in... chains, necklaces, metalized aprons, cloth with conductive thread, or metal headgear) may not be worn if...

The Secret Garden of Censorship: Ourselves.

ERIC Educational Resources Information Center

West, Celeste

1983-01-01

This essay focuses on self-censorship as applied to the library book selection process, highlighting librarian practices of selection, library collections, censorship and the publishing industry, and self-defense against censorship. Five controversial titles are included. (EJS)

Applications of thermal energy storage to waste heat recovery in the food processing industry

NASA Astrophysics Data System (ADS)

Wojnar, F.; Lunberg, W. L.

1980-03-01

A study to assess the potential for waste heat recovery in the food industry and to evaluate prospective waste heat recovery system concepts employing thermal energy storage was conducted. The study found that the recovery of waste heat in canning facilities can be performed in significant quantities using systems involving thermal energy storage that are both practical and economical. A demonstration project is proposed to determine actual waste heat recovery costs and benefits and to encourage system implementation by the food industry.

Applications of thermal energy storage to waste heat recovery in the food processing industry

NASA Technical Reports Server (NTRS)

Wojnar, F.; Lunberg, W. L.

1980-01-01

A study to assess the potential for waste heat recovery in the food industry and to evaluate prospective waste heat recovery system concepts employing thermal energy storage was conducted. The study found that the recovery of waste heat in canning facilities can be performed in significant quantities using systems involving thermal energy storage that are both practical and economical. A demonstration project is proposed to determine actual waste heat recovery costs and benefits and to encourage system implementation by the food industry.

Survival Mode: The Stresses and Strains of Computing Curricula Review

ERIC Educational Resources Information Center

Tan, Grace; Venables, Anne

2008-01-01

In an ideal world, review and changes to computing curricula should be driven solely by academic concerns for the needs of students. The process should be informed by industry accreditation processes and international best practice (Hurst et al., 2001). However, Australian computing curricular review is often driven by the need for financial…

Real-time optical fiber digital speckle pattern interferometry for industrial applications

NASA Astrophysics Data System (ADS)

Chan, Robert K.; Cheung, Y. M.; Lo, C. H.; Tam, T. K.

1997-03-01

There is current interest, especially in the industrial sector, to use the digital speckle pattern interferometry (DSPI) technique to measure surface stress. Indeed, many publications in the subject are evident of the growing interests in the field. However, to bring the technology to industrial use requires the integration of several emerging technologies, viz. optics, feedback control, electronics, imaging processing and digital signal processing. Due to the highly interdisciplinary nature of the technique, successful implementation and development require expertise in all of the fields. At Baptist University, under the funding of a major industrial grant, we are developing the technology for the industrial sector. Our system fully exploits optical fibers and diode lasers in the design to enable practical and rugged systems suited for industrial applications. Besides the development in optics, we have broken away from the reliance of a microcomputer PC platform for both image capture and processing, and have developed a digital signal processing array system that can handle simultaneous and independent image capture/processing with feedback control. The system, named CASPA for 'cascadable architecture signal processing array,' is a third generation development system that utilizes up to 7 digital signal processors has proved to be a very powerful system. With our CASPA we are now in a better position to developing novel optical measurement systems for industrial application that may require different measurement systems to operate concurrently and requiring information exchange between the systems. Applications in mind such as simultaneous in-plane and out-of-plane DSPI image capture/process, vibrational analysis with interactive DSPI and phase shifting control of optical systems are a few good examples of the potentials.

National Needs for Critically Evaluated Physical and Chemical Data.

DTIC Science & Technology

1978-01-01

poorly conceived experimencs, ineffective or inefficient manufacturing plants , and a waste of both effort and resources. To those studying basic...aspects of research and development and in the design of most products, industrial plants , and processes. They are also needed to assess the need for...designs can be made more precise, tolerances reduced, and R&D options narrowed. The wasteful practice of overdesigning industrial plants to allow for

Branding your medical practice.

PubMed

Maley, Catherine; Baum, Neil

2010-01-01

Branding is the process of differentiating your medical practice from all other practices in the industry. Branding takes into account the "look and feel" of your office, you and your staff your materials, and every other detail that gives your patients clues as to who you are and what you value. This article will review the strategies that go into building your own solid brand so your existing patients, as well as prospective ones, are attracted and loyal to you and your brand.

EDITORIAL: Sixth World Congress on Industrial Process Tomography (WCIPT6) Sixth World Congress on Industrial Process Tomography (WCIPT6)

NASA Astrophysics Data System (ADS)

Takei, Masahiro; Xu, Lijun

2011-10-01

We are pleased to publish this special feature on the Sixth World Congress on Industrial Process Tomography (WCIPT6) in Measurement Science and Technology. The international congress was successfully held in the campus of Beihang University, Beijing, China, from 6-9 September 2010. It was jointly organized by International Society for Industrial Process Tomography (ISIPT), North China Electric Power University (NCEPU) and Beihang University (BUAA). Process tomography is a tangible tool to visualize and determine the material distribution inside a process non-intrusively in real time. The internal features that can be monitored by process tomography are frequently encountered and required in the design of processes and industrial plants in the fields of chemical, oil, power and metallurgical engineering as well as many other activities such as food, material handling and combustion systems. One of the key characteristics of process tomography is to provide a direct impression and instant and clear understanding of a complex phenomenon. From the viewpoint of practical applications, industries all over the world are currently facing a number of daunting challenges including many wide-range and complex technical problems. The innovative technology of process tomography consistently contributes to providing better and better solutions to the problems as 'seeing is believing'. As a regular event, WCIPT is playing a more and more important role in addressing the challenges to overcome these problems. We are glad to see that this special feature provides a great opportunity for world-wide top-level researchers to discuss and make further developments in process tomography and its applications. The 20 articles included in this issue cover a wide range of relevant topics including sensors and sensing mechanisms, data acquisition systems and instrumentation, electrical, optical, acoustic and hybrid systems, image reconstruction and system evaluation, data and sensor fusion, data processing, other emerging technologies, and their industrial applications such as in multi-phase systems, combustion and chemical reaction, etc. The Seventh World Congress on Industrial Process Tomography (WCIPT7) will take place in Krakow, Poland, from 2-5 September 2013. We look forward to meeting you in Poland!

The relationship between paediatricians and commerce.

PubMed

Hilliard, Tom; Chambers, Timothy

2006-03-01

The interaction between doctors and commerce, particularly the pharmaceutical industry, has recently been subject to increasing scrutiny. Doctors are now exposed to mounting influence from industry as it spends large amounts of money on marketing, is heavily involved with continuing medical education and sponsors a major proportion of research. Conflicts of interest may exist on both sides of the relationship: doctors can be manipulated and companies need to be profitable. Paediatricians are just as open to this influence as are other members of the medical profession. There is evidence that clinical practice is altered by interaction with industry, although doctors appear to deny the likelihood of being influenced. There are significant concerns over the increasing involvement of the pharmaceutical industry with research, although the regulation of the industry continues to be strengthened and the process of research is becoming more transparent. Disclosure of conflicts of interest involving authorship is now common practice and should extend to all facets of the relationship. However, collaboration continues to be necessary in order to develop new therapies, maximise research and particularly in paediatrics, to test medications in children. Paediatricians need to be aware of the sources of influence and understand current guidelines so that interactions with industry continue to be appropriate.

The relationship between quality management practices and organisational performance: A structural equation modelling approach

NASA Astrophysics Data System (ADS)

Jamaluddin, Z.; Razali, A. M.; Mustafa, Z.

2015-02-01

The purpose of this paper is to examine the relationship between the quality management practices (QMPs) and organisational performance for the manufacturing industry in Malaysia. In this study, a QMPs and organisational performance framework is developed according to a comprehensive literature review which cover aspects of hard and soft quality factors in manufacturing process environment. A total of 11 hypotheses have been put forward to test the relationship amongst the six constructs, which are management commitment, training, process management, quality tools, continuous improvement and organisational performance. The model is analysed using Structural Equation Modeling (SEM) with AMOS software version 18.0 using Maximum Likelihood (ML) estimation. A total of 480 questionnaires were distributed, and 210 questionnaires were valid for analysis. The results of the modeling analysis using ML estimation indicate that the fits statistics of QMPs and organisational performance model for manufacturing industry is admissible. From the results, it found that the management commitment have significant impact on the training and process management. Similarly, the training had significant effect to the quality tools, process management and continuous improvement. Furthermore, the quality tools have significant influence on the process management and continuous improvement. Likewise, the process management also has a significant impact to the continuous improvement. In addition the continuous improvement has significant influence the organisational performance. However, the results of the study also found that there is no significant relationship between management commitment and quality tools, and between the management commitment and continuous improvement. The results of the study can be used by managers to prioritize the implementation of QMPs. For instances, those practices that are found to have positive impact on organisational performance can be recommended to managers so that they can allocate resources to improve these practices to get better performance.

Data-driven monitoring for stochastic systems and its application on batch process

NASA Astrophysics Data System (ADS)

Yin, Shen; Ding, Steven X.; Haghani Abandan Sari, Adel; Hao, Haiyang

2013-07-01

Batch processes are characterised by a prescribed processing of raw materials into final products for a finite duration and play an important role in many industrial sectors due to the low-volume and high-value products. Process dynamics and stochastic disturbances are inherent characteristics of batch processes, which cause monitoring of batch processes a challenging problem in practice. To solve this problem, a subspace-aided data-driven approach is presented in this article for batch process monitoring. The advantages of the proposed approach lie in its simple form and its abilities to deal with stochastic disturbances and process dynamics existing in the process. The kernel density estimation, which serves as a non-parametric way of estimating the probability density function, is utilised for threshold calculation. An industrial benchmark of fed-batch penicillin production is finally utilised to verify the effectiveness of the proposed approach.

Insight into the prevalence and distribution of microbial contamination to evaluate water management in the fresh produce processing industry.

PubMed

Holvoet, Kevin; Jacxsens, Liesbeth; Sampers, Imca; Uyttendaele, Mieke

2012-04-01

This study provided insight into the degree of microbial contamination in the processing chain of prepacked (bagged) lettuce in two Belgian fresh-cut produce processing companies. The pathogens Salmonella and Listeria monocytogenes were not detected. Total psychrotrophic aerobic bacterial counts (TPACs) in water samples, fresh produce, and environmental samples suggested that the TPAC is not a good indicator of overall quality and best manufacturing practices during production and processing. Because of the high TPACs in the harvested lettuce crops, the process water becomes quickly contaminated, and subsequent TPACs do not change much throughout the production process of a batch. The hygiene indicator Escherichia coli was used to assess the water management practices in these two companies in relation to food safety. Practices such as insufficient cleaning and disinfection of washing baths, irregular refilling of the produce wash baths with water of good microbial quality, and the use of high product/water ratios resulted in a rapid increase in E. coli in the processing water, with potential transfer to the end product (fresh-cut lettuce). The washing step in the production of fresh-cut lettuce was identified as a potential pathway for dispersion of microorganisms and introduction of E. coli to the end product via cross-contamination. An intervention step to reduce microbial contamination is needed, particularly when no sanitizers are used as is the case in some European Union countries. Thus, from a food safety point of view proper water management (and its validation) is a critical point in the fresh-cut produce processing industry.

Sintering Theory and Practice

NASA Astrophysics Data System (ADS)

German, Randall M.

1996-01-01

Although sintering is an essential process in the manufacture of ceramics and certain metals, as well as several other industrial operations, until now, no single book has treated both the background theory and the practical application of this complex and often delicate procedure. In Sintering Theory and Practice, leading researcher and materials engineer Randall M. German presents a comprehensive treatment of this subject that will be of great use to manufacturers and scientists alike. This practical guide to sintering considers the fact that while the bonding process improves strength and other engineering properties of the compacted material, inappropriate methods of control may lead to cracking, distortion, and other defects. It provides a working knowledge of sintering, and shows how to avoid problems while accounting for variables such as particle size, maximum temperature, time at that temperature, and other problems that may cause changes in processing. The book describes the fundamental atomic events that govern the transformation from particles to solid, covers all forms of the sintering process, and provides a summary of many actual production cycles. Building from the ground up, it begins with definitions and progresses to measurement techniques, easing the transition, especially for students, into advanced topics such as single-phase solid-state sintering, microstructure changes, the complications of mixed particles, and pressure-assisted sintering. German draws on some six thousand references to provide a coherent and lucid treatment of the subject, making scientific principles and practical applications accessible to both students and professionals. In the process, he also points out and avoids the pitfalls found in various competing theories, concepts, and mathematical disputes within the field. A unique opportunity to discover what sintering is all about--both in theory and in practice What is sintering? We see the end product of this thermal process all around us--in manufactured objects from metals, ceramics, polymers, and many compounds. From a vast professional literature, Sintering Theory and Practice emerges as the only comprehensive, systematic, and self-contained volume on the subject. Covering all aspects of sintering as a processing topic, including materials, processes, theories, and the overall state of the art, the book Offers numerous examples, illustrations, and tables that detail actual processing cycles, and that stress existing knowledge in the field Uses the specifics of various consolidation cycles to illustrate the basics Leads the reader from the fundamentals to advanced topics, without getting bogged down in various mathematical disputes over treatments and measurements Supports the discussion with critically selected references from thousands of sources Examines the sintering behavior of a wide variety of engineered materials--metals, alloys, oxide ceramics, composites, carbides, intermetallics, glasses, and polymers Guides the reader through the sintering processes for several important industrial materials and demonstrates how to control these processes effectively and improve present techniques Provides a helpful reference for specific information on materials, processing problems, and concepts For practitioners and researchers in ceramics, powder metallurgy, and other areas, and for students and faculty in materials science and engineering, this book provides the know-how and understanding crucial to many industrial operations, offers many ideas for further research, and suggests future applications of this important technology. This book offers an unprecedented opportunity to explore sintering in both practical and theoretical terms, whether at the lab or in real-world applications, and to acquire a broad, yet thorough, understanding of this important technology.

Performance measurement for information systems: Industry perspectives

NASA Technical Reports Server (NTRS)

Bishop, Peter C.; Yoes, Cissy; Hamilton, Kay

1992-01-01

Performance measurement has become a focal topic for information systems (IS) organizations. Historically, IS performance measures have dealt with the efficiency of the data processing function. Today, the function of most IS organizations goes beyond simple data processing. To understand how IS organizations have developed meaningful performance measures that reflect their objectives and activities, industry perspectives on IS performance measurement was studied. The objectives of the study were to understand the state of the practice in IS performance techniques for IS performance measurement; to gather approaches and measures of actual performance measures used in industry; and to report patterns, trends, and lessons learned about performance measurement to NASA/JSC. Examples of how some of the most forward looking companies are shaping their IS processes through measurement is provided. Thoughts on the presence of a life-cycle to performance measures development and a suggested taxonomy for performance measurements are included in the appendices.

Production, properties, and industrial food application of lactic acid bacteria-derived exopolysaccharides.

PubMed

Zannini, Emanuele; Waters, Deborah M; Coffey, Aidan; Arendt, Elke K

2016-02-01

Exopolysaccharides (EPS)-producing lactic acid bacteria (LAB) are industrially important microorganisms in the development of functional food products and are used as starter cultures or coadjutants to develop fermented foods. There is large variability in EPS production by LAB in terms of chemical composition, quantity, molecular size, charge, presence of side chains, and rigidity of the molecules. The main body of the review will cover practical aspects concerning the structural diversity structure of EPS, and their concrete application in food industries is reported in details. To strengthen the food application and process feasibility of LAB EPS at industrial level, a future academic research should be combined with industrial input to understand the technical shortfalls that EPS can address.

Innovative contracting practices for ITS : task E : final report

DOT National Transportation Integrated Search

1999-07-01

The Peer Exchange is a process adopted by the Office of Motor Carrier and Highway Safety in which teams of professionals, representing state and federal government and private industry, identify effective commercial motor vehicle safety findings for ...

A Joint Learning Activity in Process Control and Distance Collaboration between Future Engineers and Technicians

ERIC Educational Resources Information Center

Deschênes, Jean-Sebastien; Barka, Noureddine; Michaud, Mario; Paradis, Denis; Brousseau, Jean

2013-01-01

A joint learning activity in process control is presented, in the context of a distance collaboration between engineering and technical-level students, in a similar fashion as current practices in the industry involving distance coordination and troubleshooting. The necessary infrastructure and the setup used are first detailed, followed by a…

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2010 CFR

2010-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2012 CFR

2012-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

Critical Transition in Critical Zone of Intensively Managed Landscapes

NASA Astrophysics Data System (ADS)

Kumar, P.

2017-12-01

Intensification of industrial agriculture has resulted in severe unintended global impacts, including degradation of arable land and eutrophication of receiving water bodies. Modern agricultural practices rely on significant direct and indirect human energy inputs, which have created imbalances between increased rates of biogeochemical processes related to production and background rates of natural processes. These imbalances have cascaded through the deep inter-dependencies between carbon, soil, water, nutrient and ecological processes, resulting in a critical transition of the Critical Zone and creating emergent dynamics and evolutionary trajectories. Understanding of these novel organization and function of the Critical Zone is vital for developing sustainable agricultural practices.

Integrating Efficiency of Industry Processes and Practices Alongside Technology Effectiveness in Space Transportation Cost Modeling and Analysis

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2012-01-01

This paper presents past and current work in dealing with indirect industry and NASA costs when providing cost estimation or analysis for NASA projects and programs. Indirect costs, when defined as those costs in a project removed from the actual hardware or software hands-on labor; makes up most of the costs of today's complex large scale NASA space/industry projects. This appears to be the case across phases from research into development into production and into the operation of the system. Space transportation is the case of interest here. Modeling and cost estimation as a process rather than a product will be emphasized. Analysis as a series of belief systems in play among decision makers and decision factors will also be emphasized to provide context.

A Study of Vehicle Structural Layouts in Post-WWII Aircraft

NASA Technical Reports Server (NTRS)

Sensmeier, Mark D.; Samareh, Jamshid A.

2004-01-01

In this paper, results of a study of structural layouts of post-WWII aircraft are presented. This study was undertaken to provide the background information necessary to determine typical layouts, design practices, and industry trends in aircraft structural design. Design decisions are often predicated not on performance-related criteria, but rather on such factors as manufacturability, maintenance access, and of course cost. For this reason, a thorough understanding of current best practices in the industry is required as an input for the design optimization process. To determine these best practices and industry trends, a large number of aircraft structural cutaway illustrations were analyzed for five different aircraft categories (commercial transport jets, business jets, combat jet aircraft, single engine propeller aircraft, and twin-engine propeller aircraft). Several aspects of wing design and fuselage design characteristics are presented here for the commercial transport and combat aircraft categories. A great deal of commonality was observed for transport structure designs over a range of eras and manufacturers. A much higher degree of variability in structural designs was observed for the combat aircraft, though some discernable trends were observed as well.

Leading the Charge in Changing Times: 21st Century Learning and Leading

ERIC Educational Resources Information Center

Jones, Amanda Criswell

2016-01-01

Throughout history educational practices have typically been modeled after economic work practices. During the agrarian-age, educational practices modeled agrarian practices. Likewise, in the industrial-age, education became standardized and was modeled after industrial practices to prepare students for work in factories and industrial settings.…

Case Studies in Modelling, Control in Food Processes.

PubMed

Glassey, J; Barone, A; Montague, G A; Sabou, V

This chapter discusses the importance of modelling and control in increasing food process efficiency and ensuring product quality. Various approaches to both modelling and control in food processing are set in the context of the specific challenges in this industrial sector and latest developments in each area are discussed. Three industrial case studies are used to demonstrate the benefits of advanced measurement, modelling and control in food processes. The first case study illustrates the use of knowledge elicitation from expert operators in the process for the manufacture of potato chips (French fries) and the consequent improvements in process control to increase the consistency of the resulting product. The second case study highlights the economic benefits of tighter control of an important process parameter, moisture content, in potato crisp (chips) manufacture. The final case study describes the use of NIR spectroscopy in ensuring effective mixing of dry multicomponent mixtures and pastes. Practical implementation tips and infrastructure requirements are also discussed.

Some Diversification Factors of Old Industrial Regions' Economy and Transition to the Innovative Development

NASA Astrophysics Data System (ADS)

Tabashnikova, Olga

2017-11-01

The article presents the grounds for the necessity to diversify the mono-economy of old industrial regions and its transition to the innovative development based on the interaction of small and large businesses with the support of municipal, regional and governmental authorities. The examples of the world practice in state regulation of depressed territories of old industrial type and the participation of multinational corporations in their modernization are given. The role of business groups in the diversification of the Kemerovo region economy is described, as well as the importance of supporting this process by the governmental authorities.

Green Acquisitions And Lifecycle Management Of Industrial Products In The Circular Economy

NASA Astrophysics Data System (ADS)

Popa, Vasile N.; Popa, Luminita I.

2016-11-01

The article addresses the issue of green acquisitions which occur within an industrial company focused on reducing inputs while maintaining output (substitution and efficiency). These processes characterize a circular economy oriented on resource efficiency (costs saved by reducing purchasing inputs). In our article, we focus on the industrial procurement practice which can help businesses save money and materials. Besides the possibility to negotiate prices, buyers can influence suppliers to offer products and services in an efficient manner in terms of green resources. The life cycle of industrial products is used to demonstrate the environmental advantages and disadvantages of various options for acquisitions and initiatives to totally reuse them.

AN HISTORICAL PERSPECTIVE ON LIFE CYCLE MANAGEMENT AND CURRENT PRACTICES WORLDWIDE

EPA Science Inventory

Environmental life cycle management looks at products, processes, and activities by recognizing all the "cradle to grave" stages that are involved and identifying where potential environmental and economic impacts occur. Government, industry and non-governmental organizations can...

Converting Alaska fish byproducts into compost: a review

USDA-ARS?s Scientific Manuscript database

Alaska's commercial fishing industry, sportfishing and susbsistence fisheries generate over one million metric tons of processing waste each year. Composting is a practical alternative for salvaging some of these discarded materials. Rural and remote coastal communities can benefit from these source...

Converting Alaska Fish Byproducts into Compost

USDA-ARS?s Scientific Manuscript database

Alaska’s commercial fishing industry, sportfishing and subsistence fisheries generate over one million metric tons of processing waste each year. Composting is a practical alternative for salvaging some of these discarded materials. Rural and remote coastal communities can benefit from these sources...

Breaking up is hard to do: lessons learned from a pharma-free practice transformation.

PubMed

Evans, David; Hartung, Daniel M; Beasley, Denise; Fagnan, Lyle J

2013-01-01

Academic medical centers are examining relationships with the pharmaceutical industry and making changes to limit interactions. Most doctors, however, practice outside of academic institutions and see pharmaceutical detailers and accept drug samples and gifts. Little guidance for practicing physicians exists about transforming practices to become pharma-free. Consideration must be given to the impact on practice culture, staff views, and patient needs. A small private practice, setting out to transform into a pharma-free clinic, used a practice transformation process that examined the industry presence in the clinic, educated the doctors on potential conflicts of interest, and improved practice flow. Staff were given the opportunity to share concerns, and their issues were acknowledged. Educational interventions were developed to help providers keep current. Finally, efforts were made to educate patients about the policy. The clinic recorded the degree to which it was detailed. Loss of gifts, keeping current with new drugs, and managing without samples were noted concerns. Policy change champions developed strategies to address concerns. A shift in practice culture to a pharma-free clinic is achievable and maintainable over time. Barriers to success can be identified and overcome with attention given to careful gathering of information, staff input, and stakeholder education.

Diode laser welding of polypropylene: investigations of the microstructures in the welded seam

NASA Astrophysics Data System (ADS)

Abed, S.; Laurens, Patricia; Carretero, C.; Deschamps, J. R.; Duval, C.

2003-03-01

Laser welding of thermoplastic polymers is a non-contact process especially efficient for joining thermoplastic polymers. This innovative technology is already used for industrial series production in different sectors (automobile, packaging,...). The majority of the basic research concerns the weld strength depending on polymer nature, optical properties, butt design and process parameters. Nevertheless, a lack of knowledge concerning the influence of thermal history of the weld seam on morphology of semicrystalline polymer still exists, when this parameter strongly influences the strength of the weld. Actual results of diode laser transmission welding (LTW) experiments on polypropylene, a semicrystalline polymer widely used in industry, could contribute to a better understanding of the process itself and to success in practical applications.

Business Education and Training: A Value-Laden Process. Volume II: The Developing Professional: Maintaining Values in "Practical" Training.

ERIC Educational Resources Information Center

Natale, Samuel M., Ed.; Fenton, Mark B., Ed.

This volume contains 19 papers that explore value conflicts in all professions: "Changing Student Teacher Values with Respect to Business and Industry" (Ralph P. Williams, Elizabeth J. Foster); "Admissions Processes into Canadian Master of Social Work Programs in the 1990s" (John R. Graham, Beatrice Traub-Werner); "Organizational Paradigms and…

Ecological network analysis for carbon metabolism of eco-industrial parks: a case study of a typical eco-industrial park in Beijing.

PubMed

Lu, Yi; Chen, Bin; Feng, Kuishuang; Hubacek, Klaus

2015-06-16

Energy production and industrial processes are crucial economic sectors accounting for about 62% of greenhouse gas (GHG) emissions globally in 2012. Eco-industrial parks are practical attempts to mitigate GHG emissions through cooperation among businesses and the local community in order to reduce waste and pollution, efficiently share resources, and help with the pursuit of sustainable development. This work developed a framework based on ecological network analysis to trace carbon metabolic processes in eco-industrial parks and applied it to a typical eco-industrial park in Beijing. Our findings show that the entire metabolic system is dominated by supply of primary goods from the external environment and final demand. The more carbon flows through a sector, the more influence it would exert upon the whole system. External environment and energy providers are the most active and dominating part of the carbon metabolic system, which should be the first target to mitigate emissions by increasing efficiencies. The carbon metabolism of the eco-industrial park can be seen as an evolutionary system with high levels of efficiency, but this may come at the expense of larger levels of resilience. This work may provide a useful modeling framework for low-carbon design and management of industrial parks.

Code for ethical international recruitment practices: the CGFNS alliance case study.

PubMed

Shaffer, Franklin A; Bakhshi, Mukul; Dutka, Julia To; Phillips, Janice

2016-06-30

Projections indicate a global workforce shortage of approximately 4.3 million across the health professions. The need to ensure an adequate supply of health workers worldwide has created a context for the increased global migration of these professionals. The global trend in the migration of health professionals has given rise to the international recruitment industry to facilitate the passage of health workers from source to destination countries. This is particularly the case in the United States, where the majority of immigrant health professionals have come by way of the recruiting industry. This industry is largely unregulated in the United States as well as in many other countries, for which voluntary codes have been used as a means to increase transparency of the recruitment process, shape professional conduct, and mitigate harm to foreign-educated health workers. The CGFNS Alliance case study presented herein describes a multi-stakeholder effort in the United States to promote ethical recruitment practices. Such codes not only complement the WHO Global Code of Practice but are necessary to maximize the impact of these global standards on local settings. This case study offers both a historical perspective and a conceptual framework for examining the multiplicity of factors affecting the migration of human resources for health. The lessons learned provide critical insights into the factors pertaining to the relevancy and effectiveness of the WHO Code from the perspectives of both source and destination countries. This study provides a conceptual model for examining the usefulness of the WHO Code as well as how best to ensure its viability, sustainability, relevancy, and effectiveness in the global environment. This case study concludes with recommendations for evolving business models that need to be in place to strengthen the effectiveness of the WHO Code in the marketplace and to ensure its impact on the international recruitment industry in advancing ethical practices. These recommendations include using effective screening mechanisms to determine health professionals' readiness for migration as well as implementing certification processes to raise the practice standards for those directly involved in recruiting skilled workers and managing the migration flow.

Evaluating the effectiveness of implementing quality management practices in the medical industry.

PubMed

Yeh, T-M; Lai, H-P

2015-01-01

To discuss the effectiveness of 30 quality management practices (QMP) including Strategic Management, Balanced ScoreCard, Knowledge Management, and Total Quality Management in the medical industry. A V-shaped performance evaluation matrix is applied to identify the top ten practices that are important but not easy to use or implement. Quality Function Deployment (QFD) is then utilized to find key factors to improve the implementation of the top ten tools. The questionnaires were sent to the nursing staff and administrators in a hospital through e-mail and posts. A total of 250 copies were distributed and 217 copies were valid. The importance, easiness, and achievement (i.e., implementation level) of 30 quality management practices were used. Key factors for QMP implementation were sequenced in order of importance as top management involvement, inter-department communication and coordination, teamwork, hospital-wide participation, education and training, consultant professionalism, continuous internal auditing, computerized process, and incentive compensation. Top management can implement the V-shaped performance matrix to determine whether quality management practices need improvement and if so, utilize QFD to find the key factors for improvement.

Thick prescriptions: toward an interpretation of pharmaceutical sales practices.

PubMed

Oldani, Michael J

2004-09-01

Anthropologists of medicine and science are increasingly studying all aspects of pharmaceutical industry practices--from research and development to the marketing of prescription drugs. This article ethnographically explores one particular stage in the life cycle of pharmaceuticals: sales and marketing. Drawing on a range of sources-investigative journalism, medical ethics, and autoethnography--the author examines the day-to-day activities of pharmaceutical salespersons, or drug reps, during the 1990s. He describes in detail the pharmaceutical gift cycle, a three-way exchange network between doctors, salespersons, and patients and how this process of exchange is currently in a state of involution. This gift economy exists to generate prescriptions (scripts) and can mask and/or perpetuate risks and side effects for patients. With implications of pharmaceutical industry practices impacting everything from the personal-psychological to the global political economy, medical anthropologists can play a lead role in the emerging scholarly discourse concerned with critical pharmaceutical studies.

Energy Efficiency Improvement and Cost Saving Opportunities for the Dairy Processing Industry: An ENERGY STAR? Guide for Energy and Plant Managers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brush, Adrian; Masanet, Eric; Worrell, Ernst

The U.S. dairy processing industry—defined in this Energy Guide as facilities engaged in the conversion of raw milk to consumable dairy products—consumes around $1.5 billion worth of purchased fuels and electricity per year. Energy efficiency improvement is an important way to reduce these costs and to increase predictable earnings, especially in times of high energy price volatility. There are a variety of opportunities available at individual plants in the U.S. dairy processing industry to reduce energy consumption and greenhouse gas emissions in a cost-effective manner. This Energy Guide discusses energy efficiency practices and energy-efficient technologies that can be implemented atmore » the component, process, facility, and organizational levels. A discussion of the trends, structure, and energy consumption characteristics of the U.S. dairy processing industry is provided along with a description of the major process technologies used within the industry. Next, a wide variety of energy efficiency measures applicable to dairy processing plants are described. Many measure descriptions include expected savings in energy and energy-related costs, based on case study data from real-world applications in dairy processing facilities and related industries worldwide. Typical measure payback periods and references to further information in the technical literature are also provided, when available. Given the importance of water in dairy processing, a summary of basic, proven measures for improving water efficiency are also provided. The information in this Energy Guide is intended to help energy and plant managers in the U.S. dairy processing industry reduce energy and water consumption in a cost-effective manner while maintaining the quality of products manufactured. Further research on the economics of all measures—as well as on their applicability to different production practices—is needed to assess their cost effectiveness at individual plants.« less

Manufacturing: A Report on the Industry 2004

DTIC Science & Technology

2004-06-01

manufacturing innovation, process engineering, productivity, and market share ended in the late 1980s . The managerial practices, strategies, and...Work,” U.S. Chamber of Commerce, Washington, DC, 2003. From http://www.uschamber.com. Hyslop -Margison, Emery J. and Welsh, Benjamin H. “Career

Rubber finger stripper harvester for green chile

USDA-ARS?s Scientific Manuscript database

Harvest mechanization as a system requires modifying or creating new components including cultivars, production practices, and harvest, transportation and processing plant machinery. New Mexican chile is one of the last segments of the pepper industry to still rely on hand labor. This paper reports ...

Grand Rounds: An Outbreak of Toxic Hepatitis among Industrial Waste Disposal Workers

PubMed Central

Cheong, Hae-Kwan; Kim, Eun A; Choi, Jung-Keun; Choi, Sung-Bong; Suh, Jeong-Ill; Choi, Dae Seob; Kim, Jung Ran

2007-01-01

Context Industrial waste (which is composed of various toxic chemicals), changes to the disposal process, and addition of chemicals should all be monitored and controlled carefully in the industrial waste industry to reduce the health hazard to workers. Case presentation Five workers in an industrial waste plant developed acute toxic hepatitis, one of whom died after 3 months due to fulminant hepatitis. In the plant, we detected several chemicals with hepatotoxic potential, including pyridine, dimethylformamide, dimethylacetamide, and methylenedianiline. The workers had been working in the high-vapor-generating area of the plant, and the findings of pathologic examination showed typical features of acute toxic hepatitis. Discussion Infectious hepatitis and drug-induced hepatitis were excluded by laboratory findings, as well as the clinical course of hepatitis. All cases of toxic hepatitis in this plant developed after the change of the disposal process to thermochemical reaction–type treatment using unslaked lime reacted with industrial wastes. During this chemical reaction, vapor containing several toxic materials was generated. Although we could not confirm the definitive causative chemical, we suspect that these cases of hepatitis were caused by one of the hepatotoxic agents or by a synergistic interaction among several of them. Relevance to clinical or professional practice In the industrial waste treatment process, the danger of developing toxic hepatitis should be kept in mind, because any subtle change of the treatment process can generate various toxic materials and threaten the workers’ health. A mixture of hepatotoxic chemicals can induce clinical manifestations that are quite different from those predicted by the toxic property of a single agent. PMID:17366828

Chemorheology of reactive systems: Finite element analysis

NASA Technical Reports Server (NTRS)

Douglas, C.; Roylance, D.

1982-01-01

The equations which govern the nonisothermal flow of reactive fluids are outlined, and the means by which finite element analysis is used to solve these equations for the sort of arbitrary boundary conditions encountered in industrial practice are described. The performance of the computer code is illustrated by several trial problems, selected more for their value in providing insight to polymer processing flows than as practical production problems. Although a good deal remains to be learned as to the performance and proper use of this numerical technique, it is undeniably useful in providing better understanding of today's complicated polymer processing problems.

Preliminary study on enhancing waste management best practice model in Malaysia construction industry

NASA Astrophysics Data System (ADS)

Jamaludin, Amril Hadri; Karim, Nurulzatushima Abdul; Noor, Raja Nor Husna Raja Mohd; Othman, Nurulhidayah; Malik, Sulaiman Abdul

2017-08-01

Construction waste management (CWM) is the practice of minimizing and diverting construction waste, demolition debris, and land-clearing debris from disposal and redirecting recyclable resources back into the construction process. Best practice model means best choice from the collection of other practices that was built for purpose of construction waste management. The practice model can help the contractors in minimizing waste before the construction activities will be started. The importance of minimizing wastage will have direct impact on time, cost and quality of a construction project. This paper is focusing on the preliminary study to determine the factors of waste generation in the construction sites and identify the effectiveness of existing construction waste management practice conducted in Malaysia. The paper will also include the preliminary works of planned research location, data collection method, and analysis to be done by using the Analytical Hierarchy Process (AHP) to help in developing suitable waste management best practice model that can be used in the country.

Managing occupational risk in creative practice: a new perspective for occupational health and safety.

PubMed

Oughton, Nicholas

2013-01-01

There has been little recognition of the fact that creative production operates in a somewhat different environment and timeframe to that associated with traditional industries. This has resulted in the application of an orthodox, generic or ``one size fits all'' framework of Occupational Health and Safety (OHS) systems across all industries. With the rapid growth of ``creative industry,'' certain challenges arise from the application of this "generic" strategy, mainly because the systems currently employed may not be entirely suitable for creative practice. Some OHS practitioners suggest that the current OHS paradigm is failing. This paper questions the appropriateness of applying a twentieth century OHS model in the present industrial context, and considers what framework will best provide for the well-being of creative workers and their enterprise in the twenty-first century. The paper questions the notion of "Risk" and the paradox associated with "Risk Management," particularly in the context of the creative process. Clearly, risk taking contributes to creative enterprise and effective risk management should accommodate both risk minimization and risk exploitation.

Big pharma and the problem of disease inflation.

PubMed

Gabriel, Joseph M; Goldberg, Daniel S

2014-01-01

Over the course of the past decade, critics have increasingly called attention to the corrosive influence of the pharmaceutical industry on both biomedical research and the practice of medicine. Critics describe the industry's use of ghostwriting and other unethical techniques to expand their markets as evidence that medical science is all-too-frequently subordinated to the goals of corporate profit. While we do not dispute this perspective, we argue that it is imperative to also recognize that the goals of medical science and industry profit are now tightly wed to one another. As a result, medical science now operates to expand disease definitions, lower diagnostic thresholds, and otherwise advance the goals of corporate profit through the redefinition and expansion of what it means to be ill. We suggest that this process has led to a variety of ethical problems that are not fully captured by current critiques of ghostwriting and other troubling practices by the pharmaceutical industry. In our conclusion, we call for physicians, ethicists, and other concerned observers to embrace a more fundamental critique of the relationship between biomedical science and corporate profit.

Condom use as situated in a risk context: women's experiences in the massage parlour industry in Vancouver, Canada.

PubMed

Handlovsky, Ingrid; Bungay, Vicky; Kolar, Kat

2012-10-01

Investigation into condom use in sex work has aroused interest in health promotion and illness prevention. Yet there remains a dearth of inquiry into condom use practices in the indoor sex industry, particularly in North America. We performed a thematic analysis of one aspect of the indoor sex work by drawing on data from a larger mixed-methods study that investigated women's health issues in the massage parlour industry in Vancouver, Canada. Using a risk context framework, condom use was approached as a socially situated practice constituted by supportive and constraining dynamics. Three analytic categories were identified: (1) the process of condom negotiation, (2) the availability of condoms and accessibility to information on STI and (3) financial vulnerability. Within these categories, several supportive dynamics (industry experience and personal ingenuity) and constraining dynamics (lack of agency support, client preferences, limited language proficiency and the legal system) were explored as interfacing influences on condom use. Initiatives to encourage condom use must recognise the role of context in order to more effectively support the health-promoting efforts of women in sex work.

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2014 CFR

2014-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2013 CFR

2013-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

Alternative industrial carbon emissions benchmark based on input-output analysis

NASA Astrophysics Data System (ADS)

Han, Mengyao; Ji, Xi

2016-12-01

Some problems exist in the current carbon emissions benchmark setting systems. The primary consideration for industrial carbon emissions standards highly relate to direct carbon emissions (power-related emissions) and only a portion of indirect emissions are considered in the current carbon emissions accounting processes. This practice is insufficient and may cause double counting to some extent due to mixed emission sources. To better integrate and quantify direct and indirect carbon emissions, an embodied industrial carbon emissions benchmark setting method is proposed to guide the establishment of carbon emissions benchmarks based on input-output analysis. This method attempts to link direct carbon emissions with inter-industrial economic exchanges and systematically quantifies carbon emissions embodied in total product delivery chains. The purpose of this study is to design a practical new set of embodied intensity-based benchmarks for both direct and indirect carbon emissions. Beijing, at the first level of carbon emissions trading pilot schemes in China, plays a significant role in the establishment of these schemes and is chosen as an example in this study. The newly proposed method tends to relate emissions directly to each responsibility in a practical way through the measurement of complex production and supply chains and reduce carbon emissions from their original sources. This method is expected to be developed under uncertain internal and external contexts and is further expected to be generalized to guide the establishment of industrial benchmarks for carbon emissions trading schemes in China and other countries.

Characterization of the animal by-product meal industry in Costa Rica: Manufacturing practices through the production chain and food safety.

PubMed

Leiva, A; Granados-Chinchilla, F; Redondo-Solano, M; Arrieta-González, M; Pineda-Salazar, E; Molina, A

2018-06-01

Animal by-product rendering establishments are still relevant industries worldwide. Animal by-product meal safety is paramount to protect feed, animals, and the rest of the food chain from unwanted contamination. As microbiological contamination may arise from inadequate processing of slaughterhouse waste and deficiencies in good manufacturing practices within the rendering facilities, we conducted an overall establishment's inspection, including the product in several parts of the process.An evaluation of the Good Manufacturing Practices (GMP) was carried out, which included the location and access (i.e., admission) to the facilities, integrated pest management programs, physical condition of the facilities (e.g., infrastructure), equipments, vehicles and transportation, as well as critical control points (i.e., particle size and temperature set at 50 mm, 133°C at atmospheric pressure for 20 min, respectively) recommended by the OIE and the European Commission. The most sensitive points according to the evaluation are physical structure of the facilities (avg 42.2%), access to the facilities (avg 48.6%), and cleaning procedures (avg 51.4%).Also, indicator microorganisms (Salmonella spp., Clostridium spp., total coliforms, E. coli, E. coli O157:H7) were used to evaluate the safety in different parts of the animal meal production process. There was a prevalence of Salmonella spp. of 12.9, 14.3, and 33.3% in Meat and Bone Meal (MBM), poultry by-products, and fish meal, respectively. However, there were no significant differences (P = 0.73) in the prevalence between the different animal meals, according to the data collected.It was also observed that renderings associated with the poultry industry (i.e., 92.0%) obtained the best ratings overall, which reflects a satisfactory development of this sector and the integration of its production system as a whole.

Design of Hack-Resistant Diabetes Devices and Disclosure of Their Cyber Safety.

PubMed

Sackner-Bernstein, Jonathan

2017-03-01

The focus of the medical device industry and regulatory bodies on cyber security parallels that in other industries, primarily on risk assessment and user education as well as the recognition and response to infiltration. However, transparency of the safety of marketed devices is lacking and developers are not embracing optimal design practices with new devices. Achieving cyber safe diabetes devices: To improve understanding of cyber safety by clinicians and patients, and inform decision making on use practices of medical devices requires disclosure by device manufacturers of the results of their cyber security testing. Furthermore, developers should immediately shift their design processes to deliver better cyber safety, exemplified by use of state of the art encryption, secure operating systems, and memory protections from malware.

Product-based Safety Certification for Medical Devices Embedded Software.

PubMed

Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

2015-01-01

Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

An Overview of Meat Industry in Sri Lanka: A Comprehensive Review

PubMed Central

Alahakoon, Amali U.; Jo, Cheorun

2016-01-01

Livestock is considered as one of the most important segments in agriculture since animal husbandry was practiced for centuries as a backyard system by rural families. Livestock plays as a powerful tool in rural development where meat industry contributes a dominant part. Meat and meat products become a vital component in the diet, which had been one of the main protein sources traditionally as well. The development in the livestock and meat industry of Sri Lanka basically depends upon religious, cultural, and economic factors. There is a growing demand for processed meat products in Sri Lankan urban culture and several large scale processors entered the business during the past few decades. The consumption of meat and meat products shows an upward trend in Sri Lanka during the last decade and is anticipated to increase further in future. The growth potential of the local meat industry is considerably high owing to the improvement of the market and consumer perception. The present status, trends, and future prospects for the Sri Lankan meat industry with respect to production, consumption, processing, marketing, and improvement are discussed in this review. PMID:27194920

An Overview of Meat Industry in Sri Lanka: A Comprehensive Review.

PubMed

Alahakoon, Amali U; Jo, Cheorun; Jayasena, Dinesh D

2016-01-01

Livestock is considered as one of the most important segments in agriculture since animal husbandry was practiced for centuries as a backyard system by rural families. Livestock plays as a powerful tool in rural development where meat industry contributes a dominant part. Meat and meat products become a vital component in the diet, which had been one of the main protein sources traditionally as well. The development in the livestock and meat industry of Sri Lanka basically depends upon religious, cultural, and economic factors. There is a growing demand for processed meat products in Sri Lankan urban culture and several large scale processors entered the business during the past few decades. The consumption of meat and meat products shows an upward trend in Sri Lanka during the last decade and is anticipated to increase further in future. The growth potential of the local meat industry is considerably high owing to the improvement of the market and consumer perception. The present status, trends, and future prospects for the Sri Lankan meat industry with respect to production, consumption, processing, marketing, and improvement are discussed in this review.

Reducing Physical Risk Factors in Construction Work Through a Participatory Intervention: Protocol for a Mixed-Methods Process Evaluation.

PubMed

Ajslev, Jeppe; Brandt, Mikkel; Møller, Jeppe Lykke; Skals, Sebastian; Vinstrup, Jonas; Jakobsen, Markus Due; Sundstrup, Emil; Madeleine, Pascal; Andersen, Lars Louis

2016-05-26

Previous research has shown that reducing physical workload among workers in the construction industry is complicated. In order to address this issue, we developed a process evaluation in a formative mixed-methods design, drawing on existing knowledge of the potential barriers for implementation. We present the design of a mixed-methods process evaluation of the organizational, social, and subjective practices that play roles in the intervention study, integrating technical measurements to detect excessive physical exertion measured with electromyography and accelerometers, video documentation of working tasks, and a 3-phased workshop program. The evaluation is designed in an adapted process evaluation framework, addressing recruitment, reach, fidelity, satisfaction, intervention delivery, intervention received, and context of the intervention companies. Observational studies, interviews, and questionnaires among 80 construction workers organized in 20 work gangs, as well as health and safety staff, contribute to the creation of knowledge about these phenomena. At the time of publication, the process of participant recruitment is underway. Intervention studies are challenging to conduct and evaluate in the construction industry, often because of narrow time frames and ever-changing contexts. The mixed-methods design presents opportunities for obtaining detailed knowledge of the practices intra-acting with the intervention, while offering the opportunity to customize parts of the intervention.

The Design of a Practical Enterprise Safety Management System

NASA Astrophysics Data System (ADS)

Gabbar, Hossam A.; Suzuki, Kazuhiko

This book presents design guidelines and implementation approaches for enterprise safety management system as integrated within enterprise integrated systems. It shows new model-based safety management where process design automation is integrated with enterprise business functions and components. It proposes new system engineering approach addressed to new generation chemical industry. It will help both the undergraduate and professional readers to build basic knowledge about issues and problems of designing practical enterprise safety management system, while presenting in clear way, the system and information engineering practices to design enterprise integrated solution.

New Approaches in Reusable Booster System Life Cycle Cost Modeling

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2013-01-01

This paper presents the results of a 2012 life cycle cost (LCC) study of hybrid Reusable Booster Systems (RBS) conducted by NASA Kennedy Space Center (KSC) and the Air Force Research Laboratory (AFRL). The work included the creation of a new cost estimating model and an LCC analysis, building on past work where applicable, but emphasizing the integration of new approaches in life cycle cost estimation. Specifically, the inclusion of industry processes/practices and indirect costs were a new and significant part of the analysis. The focus of LCC estimation has traditionally been from the perspective of technology, design characteristics, and related factors such as reliability. Technology has informed the cost related support to decision makers interested in risk and budget insight. This traditional emphasis on technology occurs even though it is well established that complex aerospace systems costs are mostly about indirect costs, with likely only partial influence in these indirect costs being due to the more visible technology products. Organizational considerations, processes/practices, and indirect costs are traditionally derived ("wrapped") only by relationship to tangible product characteristics. This traditional approach works well as long as it is understood that no significant changes, and by relation no significant improvements, are being pursued in the area of either the government acquisition or industry?s indirect costs. In this sense then, most launch systems cost models ignore most costs. The alternative was implemented in this LCC study, whereby the approach considered technology and process/practices in balance, with as much detail for one as the other. This RBS LCC study has avoided point-designs, for now, instead emphasizing exploring the trade-space of potential technology advances joined with potential process/practice advances. Given the range of decisions, and all their combinations, it was necessary to create a model of the original model and use genetic algorithms to explore results. A strong business case occurs when viable paths are identified for an affordable up-front investment, and these paths can credibly achieve affordable, responsive operations, characterized by smaller direct touch labor efforts at the wing level from flight to flight. The results supporting this approach, its potential, and its conclusions are presented here.

New Approaches in Reuseable Booster System Life Cycle Cost Modeling

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2013-01-01

This paper presents the results of a 2012 life cycle cost (LCC) study of hybrid Reusable Booster Systems (RBS) conducted by NASA Kennedy Space Center (KSC) and the Air Force Research Laboratory (AFRL). The work included the creation of a new cost estimating model and an LCC analysis, building on past work where applicable, but emphasizing the integration of new approaches in life cycle cost estimation. Specifically, the inclusion of industry processes/practices and indirect costs were a new and significant part of the analysis. The focus of LCC estimation has traditionally been from the perspective of technology, design characteristics, and related factors such as reliability. Technology has informed the cost related support to decision makers interested in risk and budget insight. This traditional emphasis on technology occurs even though it is well established that complex aerospace systems costs are mostly about indirect costs, with likely only partial influence in these indirect costs being due to the more visible technology products. Organizational considerations, processes/practices, and indirect costs are traditionally derived ("wrapped") only by relationship to tangible product characteristics. This traditional approach works well as long as it is understood that no significant changes, and by relation no significant improvements, are being pursued in the area of either the government acquisition or industry?s indirect costs. In this sense then, most launch systems cost models ignore most costs. The alternative was implemented in this LCC study, whereby the approach considered technology and process/practices in balance, with as much detail for one as the other. This RBS LCC study has avoided point-designs, for now, instead emphasizing exploring the trade-space of potential technology advances joined with potential process/practice advances. Given the range of decisions, and all their combinations, it was necessary to create a model of the original model and use genetic algorithms to explore results. A strong business case occurs when viable paths are identified for an affordable up-front investment, and these paths can credibly achieve affordable, responsive operations, characterized by smaller direct touch labor efforts at the wing level from flight to flight. The results supporting this approach, its potential, and its conclusions are presented here.

Potentials for win-win alliances among animal agriculture and forest products industries: application of the principles of industrial ecology and sustainable development.

PubMed

Cowling, Ellis B; Furiness, Carl S

2005-12-01

Commercial forests in many parts of the world are deficient in nitrogen and phosphorus. These nutrient-deficient forests often exist in close proximity to large animal feeding operations, meat processing and other food, textile, or other biomass-processing plants, and municipal waste treatment facilities. Many of these facilities produce large surpluses of nitrogen, phosphorus, and organic matter as gaseous ammonia, urea, uric acid, phosphorus compounds, bacterial sludges, and partially treated municipal wastewaters. These co-existing and substantial nutrient deficiencies and surpluses offer ready-made opportunities for discovery, demonstration, and commercial development of science-based, technology-facilitated, environmentally sound, economically viable, and socially acceptable "win-win alliances" among these major industries based on the principles of industrial ecology and sustainable development. The major challenge is to discover practical means to capture the surplus nutrients and put them to work in forest stands from which value-added products can be produced and sold at a profit.

Patient Engagement Practices in Clinical Research among Patient Groups, Industry, and Academia in the United States: A Survey

PubMed Central

Smith, Sophia K.; Selig, Wendy; Harker, Matthew; Roberts, Jamie N.; Hesterlee, Sharon; Leventhal, David; Klein, Richard; Patrick-Lake, Bray; Abernethy, Amy P.

2015-01-01

Objective Patient-centered clinical trial design and execution is becoming increasingly important. No best practice guidelines exist despite a key stakeholder declaration to create more effective engagement models. This study aims to gain a better understanding of attitudes and practices for engaging patient groups so that actionable recommendations may be developed. Methods Individuals from industry, academic institutions, and patient groups were identified through Clinical Trials Transformation Initiative and Drug Information Association rosters and mailing lists. Objectives, practices, and perceived barriers related to engaging patient groups in the planning, conduct, and interpretation of clinical trials were reported in an online survey. Descriptive and inferential statistical analysis of survey data followed a literature review to inform survey questions. Results Survey respondents (n = 179) valued the importance of involving patient groups in research; however, patient group respondents valued their contributions to research protocol development, funding acquisition, and interpretation of study results more highly than those contributions were valued by industry and academic respondents (all p < .001). Patient group respondents placed higher value in open communications, clear expectations, and detailed contract execution than did non–patient group respondents (all p < .05). Industry and academic respondents more often cited internal bureaucratic processes and reluctance to share information as engagement barriers than did patient group respondents (all p < .01). Patient groups reported that a lack of transparency and understanding of the benefits of collaboration on the part of industry and academia were greater barriers than did non–patient group respondents (all p< .01). Conclusions Despite reported similarities among approaches to engagement by the three stakeholder groups, key differences exist in perceived barriers and benefits to partnering with patient groups among the sectors studied. This recognition could inform the development of best practices for patient-centered clinical trial design and execution. Additional research is needed to define and optimize key success factors. PMID:26465328

Patient Engagement Practices in Clinical Research among Patient Groups, Industry, and Academia in the United States: A Survey.

PubMed

Smith, Sophia K; Selig, Wendy; Harker, Matthew; Roberts, Jamie N; Hesterlee, Sharon; Leventhal, David; Klein, Richard; Patrick-Lake, Bray; Abernethy, Amy P

2015-01-01

Patient-centered clinical trial design and execution is becoming increasingly important. No best practice guidelines exist despite a key stakeholder declaration to create more effective engagement models. This study aims to gain a better understanding of attitudes and practices for engaging patient groups so that actionable recommendations may be developed. Individuals from industry, academic institutions, and patient groups were identified through Clinical Trials Transformation Initiative and Drug Information Association rosters and mailing lists. Objectives, practices, and perceived barriers related to engaging patient groups in the planning, conduct, and interpretation of clinical trials were reported in an online survey. Descriptive and inferential statistical analysis of survey data followed a literature review to inform survey questions. Survey respondents (n = 179) valued the importance of involving patient groups in research; however, patient group respondents valued their contributions to research protocol development, funding acquisition, and interpretation of study results more highly than those contributions were valued by industry and academic respondents (all p < .001). Patient group respondents placed higher value in open communications, clear expectations, and detailed contract execution than did non-patient group respondents (all p < .05). Industry and academic respondents more often cited internal bureaucratic processes and reluctance to share information as engagement barriers than did patient group respondents (all p < .01). Patient groups reported that a lack of transparency and understanding of the benefits of collaboration on the part of industry and academia were greater barriers than did non-patient group respondents (all p< .01). Despite reported similarities among approaches to engagement by the three stakeholder groups, key differences exist in perceived barriers and benefits to partnering with patient groups among the sectors studied. This recognition could inform the development of best practices for patient-centered clinical trial design and execution. Additional research is needed to define and optimize key success factors.

Business Process Flow Diagrams in Tissue Bank Informatics System Design, and Identification and Communication of Best Practices: The Pharmaceutical Industry Experience.

PubMed

McDonald, Sandra A; Velasco, Elizabeth; Ilasi, Nicholas T

2010-12-01

Pfizer, Inc.'s Tissue Bank, in conjunction with Pfizer's BioBank (biofluid repository), endeavored to create an overarching internal software package to cover all general functions of both research facilities, including sample receipt, reconciliation, processing, storage, and ordering. Business process flow diagrams were developed by the Tissue Bank and Informatics teams as a way of characterizing best practices both within the Bank and in its interactions with key internal and external stakeholders. Besides serving as a first step for the software development, such formalized process maps greatly assisted the identification and communication of best practices and the optimization of current procedures. The diagrams shared here could assist other biospecimen research repositories (both pharmaceutical and other settings) for comparative purposes or as a guide to successful informatics design. Therefore, it is recommended that biorepositories consider establishing formalized business process flow diagrams for their laboratories, to address these objectives of communication and strategy.

Architecture Of High Speed Image Processing System

NASA Astrophysics Data System (ADS)

Konishi, Toshio; Hayashi, Hiroshi; Ohki, Tohru

1988-01-01

One of architectures for a high speed image processing system which corresponds to a new algorithm for a shape understanding is proposed. And the hardware system which is based on the archtecture was developed. Consideration points of the architecture are mainly that using processors should match with the processing sequence of the target image and that the developed system should be used practically in an industry. As the result, it was possible to perform each processing at a speed of 80 nano-seconds a pixel.

American Pastured Poultry Producers Association (APPPA) Perspective of Alternative Poultry Production Practices

USDA-ARS?s Scientific Manuscript database

The American Pastured Poultry Producers Association (APPPA) is a nonprofit educational and networking organization dedicated to encouraging the production, processing, and marketing of poultry raised on pasture, and is the largest industry group focused on pastured poultry. APPPA passionately embr...

Conservation--In the People's Hands.

ERIC Educational Resources Information Center

Foster, A.B.; And Others

Because of increasing population and industrialization and decreasing supplies of natural resources, the need for sound conservation practices has become paramount, particularly within the last decade. In addition, the process of urbanization has limited the contacts large numbers of children have with the outdoors. Education must assume a…

Software Engineering Technology Infusion Within NASA

NASA Technical Reports Server (NTRS)

Zelkowitz, Marvin V.

1996-01-01

Abstract technology transfer is of crucial concern to both government and industry today. In this paper, several software engineering technologies used within NASA are studied, and the mechanisms, schedules, and efforts at transferring these technologies are investigated. The goals of this study are: 1) to understand the difference between technology transfer (the adoption of a new method by large segments of an industry) as an industry-wide phenomenon and the adoption of a new technology by an individual organization (called technology infusion); and 2) to see if software engineering technology transfer differs from other engineering disciplines. While there is great interest today in developing technology transfer models for industry, it is the technology infusion process that actually causes changes in the current state of the practice.

Naturally occurring radioactive materials (NORM): a matter of wide societal implication.

PubMed

Pescatore, C; Menon, S

2000-12-01

Naturally occurring radioactive materials are ubiquitous on Earth and their radioactivity may become concentrated as a result of human activities. Numerous industries produce concentrated radioactivity in their by-products: the coal industry, petroleum extraction and processing, water treatment, etc. The present reference system of radiation protection does not provide a complete framework for the coherent management of all types of radioactively contaminated materials. Inconsistencies in waste management policy and practice can be noted across the board, and especially vis-à-vis the management of radioactive waste from the nuclear industry. This article reviews the present societal approach to manage materials that are radioactive but are often not recognised as being such, and place the management of radioactive materials from the nuclear industry in perspective.

Cationic polyacrylamide enhancing cellulase treatment efficiency of hardwood kraft-based dissolving pulp.

PubMed

Wang, Qiang; Liu, Shanshan; Yang, Guihua; Chen, Jiachuan; Ni, Yonghao

2015-05-01

Cellulase treatment for decreasing viscosity and increasing Fock reactivity of dissolving pulp is a promising approach to reduce the use of toxic chemicals, such as hypochlorite in the dissolving pulp manufacturing process in the industry. Improving the cellulase treatment efficiency during the process is of practical interest. In the present study, the concept of using cationic polyacrylamide (CPAM) to enhance the cellulase treatment efficiency was demonstrated. This was mainly attributed to the increased cellulase adsorption onto cellulose fibers based on the patching/bridging mechanism. Results showed that the cellulase adsorption was increased by about 20% with the addition of 250 ppm of CPAM under the same conditions as those of the control. It was found that the viscosity decrease and Fock reactivity increase for the cellulase treatment was enhanced from using CPAM. The CPAM-assisted cellulase treatment concept may provide a practical alternative to the present hypochlorite-based technology for viscosity control in the industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of Quadratic Programming Algorithm Based on Interior Point Method with Estimation Mechanism of Active Constraints

NASA Astrophysics Data System (ADS)

Hashimoto, Hiroyuki; Takaguchi, Yusuke; Nakamura, Shizuka

Instability of calculation process and increase of calculation time caused by increasing size of continuous optimization problem remain the major issues to be solved to apply the technique to practical industrial systems. This paper proposes an enhanced quadratic programming algorithm based on interior point method mainly for improvement of calculation stability. The proposed method has dynamic estimation mechanism of active constraints on variables, which fixes the variables getting closer to the upper/lower limit on them and afterwards releases the fixed ones as needed during the optimization process. It is considered as algorithm-level integration of the solution strategy of active-set method into the interior point method framework. We describe some numerical results on commonly-used bench-mark problems called “CUTEr” to show the effectiveness of the proposed method. Furthermore, the test results on large-sized ELD problem (Economic Load Dispatching problems in electric power supply scheduling) are also described as a practical industrial application.

Modified SPC for short run test and measurement process in multi-stations

NASA Astrophysics Data System (ADS)

Koh, C. K.; Chin, J. F.; Kamaruddin, S.

2018-03-01

Due to short production runs and measurement error inherent in electronic test and measurement (T&M) processes, continuous quality monitoring through real-time statistical process control (SPC) is challenging. Industry practice allows the installation of guard band using measurement uncertainty to reduce the width of acceptance limit, as an indirect way to compensate the measurement errors. This paper presents a new SPC model combining modified guard band and control charts (\\bar{\\text{Z}} chart and W chart) for short runs in T&M process in multi-stations. The proposed model standardizes the observed value with measurement target (T) and rationed measurement uncertainty (U). S-factor (S f) is introduced to the control limits to improve the sensitivity in detecting small shifts. The model was embedded in automated quality control system and verified with a case study in real industry.

[Purification of complicated industrial organic waste gas by complex absorption].

PubMed

Chen, Ding-Sheng; Cen, Chao-Ping; Tang, Zhi-Xiong; Fang, Ping; Chen, Zhi-Hang

2011-12-01

Complicated industrial organic waste gas with the characteristics of low concentration,high wind volume containing inorganic dust and oil was employed the research object by complex absorption. Complex absorption mechanism, process flow, purification equipment and engineering application were studied. Three different surfactants were prepared for the composite absorbent to purify exhaust gas loaded with toluene and butyl acetate, respectively. Results show that the low surface tension of the composite absorbent can improve the removal efficiency of toluene and butyl acetate. With the advantages of the water film, swirl plate and fill absorption device, efficient absorption equipment was developed for the treatment of complicated industrial organic waste gas. It is with superiorities of simple structure, small size, anti-jam and high mass transfer. Based on absorption technology, waste gas treatment process integrated with heating stripping, burning and anaerobic and other processes, so that emissions of waste gas and absorption solution could meet the discharge standards. The technology has been put into practice, such as manufacturing and spraying enterprises.

Developing a new industrial engineering curriculum using a systems engineering approach

NASA Astrophysics Data System (ADS)

Buyurgan, Nebil; Kiassat, Corey

2017-11-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

NASA Astrophysics Data System (ADS)

Luthra, S.; Garg, D.; Haleem, A.

2014-04-01

Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

Time to finger point or fix? An invitation to join ongoing efforts to promote ethical authorship and other good publication practices.

PubMed

Woolley, Karen L; Gertel, Art; Hamilton, Cindy W; Jacobs, Adam; Snyder, Gene P

2013-01-01

In this commentary, we present evidence that unethical authorship (eg, guest and ghost authoring) and other publication practices are not restricted to the pharmaceutical industry; they also occur in academia. Such practices are not an industry problem--they are a research problem. To enhance trust in industry-sponsored research, companies have made rapid and far-reaching changes to their publication guidelines, policies, and procedures. Professional medical writers have adopted, and continue to implement, these changes. Although evidence indicates that industry practices are improving, there is certainly more to do, both in industry and academia. We invite readers to join ongoing efforts to promote ethical publication practices.

Energy management study: A proposed case of government building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount ofmore » energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.« less

Energy management study: A proposed case of government building

NASA Astrophysics Data System (ADS)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

2015-05-01

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

Vacuum pumps and systems: A review of current practice

NASA Technical Reports Server (NTRS)

Giles, Stuart

1986-01-01

A review of the fundamental characteristics of the many types of vacuum pumps and vacuum pumping systems is given. The optimum pumping range, relative cost, performance limitations, maintenance problems, system operating costs and similar subjects are discussed. Experiences from the thin film deposition, chemical processing, material handling, food processing and other industries, as well as space simulation are used to support conclusions and recommendations.

16 CFR 18.8 - Deception as to origin or source of industry products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Deception as to origin or source of industry products. 18.8 Section 18.8 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is...

Float-zone processing in a weightless environment

NASA Technical Reports Server (NTRS)

Fowle, A. A.; Haggerty, J. S.; Perron, R. R.; Strong, P. F.; Swanson, J. L.

1976-01-01

The results were reported of investigations to: (1) test the validity of analyses which set maximum practical diameters for Si crystals that can be processed by the float zone method in a near weightless environment, (2) determine the convective flow patterns induced in a typical float zone, Si melt under conditions perceived to be advantageous to the crystal growth process using flow visualization techniques applied to a dimensionally scaled model of the Si melt, (3) revise the estimates of the economic impact of space produced Si crystal by the float zone method on the U.S. electronics industry, and (4) devise a rational plan for future work related to crystal growth phenomena wherein low gravity conditions available in a space site can be used to maximum benefit to the U.S. electronics industry.

When Doing Wrong Feels So Right: Normalization of Deviance.

PubMed

Price, Mary R; Williams, Teresa C

2018-03-01

Normalization of deviance is a term first coined by sociologist Diane Vaughan when reviewing the Challenger disaster. Vaughan noted that the root cause of the Challenger disaster was related to the repeated choice of NASA officials to fly the space shuttle despite a dangerous design flaw with the O-rings. Vaughan describes this phenomenon as occurring when people within an organization become so insensitive to deviant practice that it no longer feels wrong. Insensitivity occurs insidiously and sometimes over years because disaster does not happen until other critical factors line up. In clinical practice, failing to do time outs before procedures, shutting off alarms, and breaches of infection control are deviances from evidence-based practice. As in other industries, health care workers do not make these choices intending to set into motion a cascade toward disaster and harm. Deviation occurs because of barriers to using the correct process or drivers such as time, cost, and peer pressure. As in other industries, operators will often adamantly defend their actions as necessary and justified. Although many other high-risk industries have embraced the normalization of deviance concept, it is relatively new to health care. It is urgent that we explore the impact of this concept on patient harm. We can borrow this concept from other industries and also the steps these other high-risk organizations have found to prevent it.

76 FR 2878 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

.... The Act is designed to protect the financial interests of livestock and poultry producers engaged in commerce of livestock and live poultry sold for slaughter. It also protects members of the livestock and poultry marketing, processing, and merchandising industries from unfair competitive practices. GIPSA will...

Ultrasound as an intervention technology for the sanitation of lettuce harvesting knife

USDA-ARS?s Scientific Manuscript database

Lettuce field-coring and trimming practices are recent industry developments designed to improve fresh-cut processing yield and reduce shipping and waste disposal costs. Studies showed that the harvesting/coring knives used could be potentially contaminated with pathogens by contact with contaminat...

A View from Albemarle

ERIC Educational Resources Information Center

Holt, Thaddeus

1977-01-01

This paper was originally delivered in July of 1975, within a few weeks of the Supreme Court's decision in the case of "Albemarle Paper Company v. Moody". Its intent is to shed light on the interrelationship between the practice of industrial psychology and the judicial process in operation. (Editor/RK)

SEPARATION OF Cs$sup 137$ FROM HIGH-ACTIVITY RADIOACTIVE WASTE (in Dutch)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1963-01-01

A process was developed on a laboratory scale to separate Cs/sup 137/ from waste fuels of atomic reactors. The recovery of this powerful and industrially important gamma emitter of 30 years half life is said to be so simple as to make it possible on an industrial scale. It is based on the preferential absorption of Cs by ammonium phosphor-molybdate from the nitric acid solution of the waste material and the subsequent extraction of Cs from its absorber. This method is more practical than other processes which are based upon precipitation and recrystallization of cesium salts. It was successfully testedmore » on waste solutions of very different compositions. (OID)« less

The Conversion and Sustainable Use of Alumina Refinery Residues: Global Solution Examples

NASA Astrophysics Data System (ADS)

Fergusson, Lee

This paper introduces current industry best practice for the conversion of alumina refinery residues (or "red mud") from hazardous waste to benign, inert material. The paper will examine four neutralization methods and Basecon Technology, a sustainable conversion process. The paper will consider ways through which this converted material can be combined and processed for sustainable applications in the treatment of hazardous waste streams (such as industrial wastewater and sludges, biosolids, and CCA wastes), contaminated brownfield sites, and mine site wastes. Recent discoveries and applications, such as the successful treatment of high levels of radium in drinking water in the USA, will also be discussed. Examples of global solutions and their technical merits will be assessed.

Evidence-based integrated environmental solutions for secondary lead smelters: pollution prevention and waste minimization technologies and practices.

PubMed

Genaidy, A M; Sequeira, R; Tolaymat, T; Kohler, J; Rinder, M

2009-05-01

An evidence-based methodology was adopted in this research to establish strategies to increase lead recovery and recycling via a systematic review and critical appraisal of the published literature. In particular, the research examines pollution prevention and waste minimization practices and technologies that meet the following criteria: (a) reduce/recover/recycle the largest quantities of lead currently being disposed of as waste, (b) technically and economically viable, that is, ready to be diffused and easily transferable, and (c) strong industry interest (i.e., industry would consider implementing projects with higher payback periods). The following specific aims are designed to achieve the study objectives: Aim 1 - To describe the recycling process of recovering refined lead from scrap; Aim 2 - To document pollution prevention and waste management technologies and practices adopted by US stakeholders along the trajectory of LAB and lead product life cycle; Aim 3 - To explore improved practices and technologies which are employed by other organizations with an emphasis on the aforementioned criteria; Aim 4 - To demonstrate the economic and environmental costs and benefits of applying improved technologies and practices to existing US smelting operations; and Aim 5 - To evaluate improved environmental technologies and practices using an algorithm that integrates quantitative and qualitative criteria. The process of identifying relevant articles and reports was documented. The description of evidence was presented for current practices and technologies used by US smelters as well as improved practices and technologies. Options for integrated environmental solutions for secondary smelters were introduced and rank ordered on the basis of costs (i.e., capital investment) and benefits (i.e., production increases, energy and flux savings, and reduction of SO(2) and slag). An example was provided to demonstrate the utility of the algorithm by detailing the costs and benefits associated with different combinations of practices and technologies. The evidence-based methodology documented in this research reveals that it is technically and economically feasible to implement integrated environmental solutions to increase lead recovery and recycling among US smelters. The working example presented in this research can be confirmed with US stakeholders and form the basis for implementable solutions in the lead smelter and product industries to help reverse the overall trend of declining life-cycle recycling rates.

The Practicality of Cooperative Education between an Industry and University

NASA Astrophysics Data System (ADS)

Oomichi, Takeo; Jianming, Yang; Matsubara, Takenori; Tatsuno, Kyoichi; Takahashi, Tomoichi

Some cooperative methods have been proposed and executed as the R&D (research and development) between universities and industries meld together to form a new hybeid business. This paper proposes the ides of “Fusion Education” for the advancement of education and for fostering new business. In fusion education, university students will begin by mainly verifying the application potential of a developed system such as modulated robotic software, for example, and improve specific areas when and if needed. Then, the university will rank the systems according to its reliability or safety record (based on the student) complete verification test which includes data on when the robot will be operated and under what varying conditions (such as performance in various private houses). The university essentially gives students the chance to find a solution to practical problems while the industry gets a reliable (fully authorized) system as result of this education process. The concept and feasibility of this “fusion education” will now be discussed.

Developing a green lending model for renewable energy project (case study electricity from biogas fuel at Palm Oil Industry)

NASA Astrophysics Data System (ADS)

Sukirman, Y. A.

2018-03-01

In the last two decades, development initiatives solely aimed to generate economic growth has been placed under scrutiny, particularly amidst the rampant discussion on the quality decline of the environment, growing social divide and climate change along with its implications thereof. Considerations of the negative impacts brought about by the economic development process prompted the move to adopt the sustainable financing model that gives precedence to economic, environmental and social aspects. We introduced Green Lending Model for Renewable Energy Project (Case Study Electricity From Biogas at Palm Oil Industry) based on sustainability financing, which is used as variable to implementing financial institutions’ lending policies. There are two major trends in the literature relating to sustainability and the banking industry: external and internal practices. The external practices strand analyzes the relevance of sustainability to the bank’s communication with shareholders and other stakeholders, and how investors use it as a measure to help achieve optimal portfolio allocation. The internal practices literature, more relevant to the present work, studies how sustainability criteria are integrated into risk management models and lending practices. Its first implementation is in the Palm Oil industry at South Sumatera. The results explained that sustainability is not related to profit either from a short- or long-term perspective. The Sustainable Green Lending Model is related to the Equator Principles and its application is driven to project financing. It also related with short- and long-term risks and opportunities, instead of short-term sustainability impacts.

Declining physical activity and the socio-cultural context of the geography of industrial restructuring: a novel conceptual framework.

PubMed

Rind, Esther; Jones, Andy

2014-05-01

At the population level, the prevalence of physical activity has declined considerably in many developed countries in recent decades. There is some evidence that areas exhibiting the lowest activity levels are those which have undergone a particularly strong transition away from employment in physically demanding occupations. We propose that processes of deindustrialization may be causally linked to unexplained geographical disparities in levels of physical activity. While the sociocultural correlates of physical activity have been well studied, and prior conceptual frameworks have been developed to explain more general patterns of activity, none have explicitly attempted to identify the components of industrial change that may impact physical activity. In this work we review the current literature on sociocultural correlates of health behaviors before using a case study centered on the United Kingdom to present a novel framework that links industrial change to declining levels of physical activity. We developed a comprehensive model linking sociocultural correlates of physical activity to processes associated with industrial restructuring and discuss implication for policy and practice. A better understanding of sociocultural processes may help to ameliorate adverse health consequences of employment decline in communities that have experienced substantial losses of manual employment.

Affairs of power: Restructuring California's electric utility industry, 1968-1998

NASA Astrophysics Data System (ADS)

Myers, William Allan

This dissertation studies the process of change in the political economy of electric utilities. Following two decades of continual growth during the nation's post-World War Two economic and population boom, the electric power industry confronted increasing challenges to its traditional operating practices and cultural values, nowhere with greater intensity than in California. Pressure for change came from outside forces who opposed utilities' business practices, assailed their traditional vertically-integrated structure, questioned the political assumptions that sustained their monopoly status, and ultimately wrested away access to the once tightly controlled technology of electric generation and transmission. Because managers of both investor-owned and publicly-owned utilities continued to rely upon long-standing economic and technical assumptions derived from deeply held cultural values sustained by decades of business success, they were rendered unable to comprehend and unwilling to accommodate change. Persistent mistrust between the publicly-owned and privately-owned sectors further weakened the industry's ability to work cooperatively in the face of crucial challenges. Thus encumbered by endemic structural jealousy, technological path dependency, and organizational stasis, the industry did not respond with sufficient innovation to new social values and altering economic conditions, ultimately resulting in the discarding of the old political economy of regulated monopolism. Five precepts of economic history are identified as crucial elements of the process of change. First, the tension between protection and entry, and the related issue of access to technology, contributes to creation and modification of the political economy in which economic institutions function. Second, submission to governmental regulatory powers allows certain industries to control entry, restrict access, and protect themselves from the dynamics of competitive change. Third, an unanticipated result of the regulatory process is to encourage organizational stasis and technological path dependency. Fourth, the mechanism of change to the political economy follows Kuhnian mechanics. Fifth, creative destruction, a central dynamic of capitalism, may be deferred but not eliminated by a regulatory political economy; modifications to technology, economics, or political power eventually force change upon protected institutions.

Competent statistical programmer: Need of business process outsourcing industry

PubMed Central

Khan, Imran

2014-01-01

Over the last two decades Business Process Outsourcing (BPO) has evolved as much mature practice. India is looked as preferred destination for pharmaceutical outsourcing over a cost arbitrage. Among the biometrics outsourcing, statistical programming and analysis required very niche skill for service delivery. The demand and supply ratios are imbalance due to high churn out rate and less supply of competent programmer. Industry is moving from task delivery to ownership and accountability. The paradigm shift from an outsourcing to consulting is triggering the need for competent statistical programmer. Programmers should be trained in technical, analytical, problem solving, decision making and soft skill as the expectations from the customer are changing from task delivery to accountability of the project. This paper will highlight the common issue SAS programming service industry is facing and skills the programmers need to develop to cope up with these changes. PMID:24987578

Competent statistical programmer: Need of business process outsourcing industry.

PubMed

Khan, Imran

2014-07-01

Over the last two decades Business Process Outsourcing (BPO) has evolved as much mature practice. India is looked as preferred destination for pharmaceutical outsourcing over a cost arbitrage. Among the biometrics outsourcing, statistical programming and analysis required very niche skill for service delivery. The demand and supply ratios are imbalance due to high churn out rate and less supply of competent programmer. Industry is moving from task delivery to ownership and accountability. The paradigm shift from an outsourcing to consulting is triggering the need for competent statistical programmer. Programmers should be trained in technical, analytical, problem solving, decision making and soft skill as the expectations from the customer are changing from task delivery to accountability of the project. This paper will highlight the common issue SAS programming service industry is facing and skills the programmers need to develop to cope up with these changes.

Handbook of Industrial Engineering Equations, Formulas, and Calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badiru, Adedeji B; Omitaomu, Olufemi A

The first handbook to focus exclusively on industrial engineering calculations with a correlation to applications, Handbook of Industrial Engineering Equations, Formulas, and Calculations contains a general collection of the mathematical equations often used in the practice of industrial engineering. Many books cover individual areas of engineering and some cover all areas, but none covers industrial engineering specifically, nor do they highlight topics such as project management, materials, and systems engineering from an integrated viewpoint. Written by acclaimed researchers and authors, this concise reference marries theory and practice, making it a versatile and flexible resource. Succinctly formatted for functionality, the bookmore » presents: Basic Math Calculations; Engineering Math Calculations; Production Engineering Calculations; Engineering Economics Calculations; Ergonomics Calculations; Facility Layout Calculations; Production Sequencing and Scheduling Calculations; Systems Engineering Calculations; Data Engineering Calculations; Project Engineering Calculations; and Simulation and Statistical Equations. It has been said that engineers make things while industrial engineers make things better. To make something better requires an understanding of its basic characteristics and the underlying equations and calculations that facilitate that understanding. To do this, however, you do not have to be computational experts; you just have to know where to get the computational resources that are needed. This book elucidates the underlying equations that facilitate the understanding required to improve design processes, continuously improving the answer to the age-old question: What is the best way to do a job?« less

Combinatorial life cycle assessment to inform process design of industrial production of algal biodiesel.

PubMed

Brentner, Laura B; Eckelman, Matthew J; Zimmerman, Julie B

2011-08-15

The use of algae as a feedstock for biodiesel production is a rapidly growing industry, in the United States and globally. A life cycle assessment (LCA) is presented that compares various methods, either proposed or under development, for algal biodiesel to inform the most promising pathways for sustainable full-scale production. For this analysis, the system is divided into five distinct process steps: (1) microalgae cultivation, (2) harvesting and/or dewatering, (3) lipid extraction, (4) conversion (transesterification) into biodiesel, and (5) byproduct management. A number of technology options are considered for each process step and various technology combinations are assessed for their life cycle environmental impacts. The optimal option for each process step is selected yielding a best case scenario, comprised of a flat panel enclosed photobioreactor and direct transesterification of algal cells with supercritical methanol. For a functional unit of 10 GJ biodiesel, the best case production system yields a cumulative energy demand savings of more than 65 GJ, reduces water consumption by 585 m(3) and decreases greenhouse gas emissions by 86% compared to a base case scenario typical of early industrial practices, highlighting the importance of technological innovation in algae processing and providing guidance on promising production pathways.

A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

NASA Astrophysics Data System (ADS)

Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

Design of Hack-Resistant Diabetes Devices and Disclosure of Their Cyber Safety

PubMed Central

Sackner-Bernstein, Jonathan

2017-01-01

Background: The focus of the medical device industry and regulatory bodies on cyber security parallels that in other industries, primarily on risk assessment and user education as well as the recognition and response to infiltration. However, transparency of the safety of marketed devices is lacking and developers are not embracing optimal design practices with new devices. Achieving cyber safe diabetes devices: To improve understanding of cyber safety by clinicians and patients, and inform decision making on use practices of medical devices requires disclosure by device manufacturers of the results of their cyber security testing. Furthermore, developers should immediately shift their design processes to deliver better cyber safety, exemplified by use of state of the art encryption, secure operating systems, and memory protections from malware. PMID:27837161

To Meet or Not To Meet Physical vs. Virtual Configuration Control Board

NASA Technical Reports Server (NTRS)

Rice, Shelley

2017-01-01

This presentation will define the CCB, discuss its functions and members. We will look into traditional processes of managing change control via the CCB meeting and advanced practices utilizing enhanced product tools and technologies. Well step through a summary of the feedback from the community of CM professionals at NASA Goddard Space Flight Center of best practices as well as pros and cons for facilitating both a physical CCB and managing stakeholder approvals in a virtual environment. Attendees will come away with current industry strategies to determine if process for managing change control and approvals can be streamlined within their local work environments.

A Modern Series Of Cinematographic Lenses: From Concept To Product

NASA Astrophysics Data System (ADS)

Neil, lain A.

1988-06-01

In the past photographic "taking" lenses and, in particular, those for the motion picture industry i.e. cinematographic lenses have had a mixed career due to inconsistencies between the processes of lens design, manufacture, testing and calibration and practical assessment in the customer domain. Usually these inconsistencies can be attributed to differences between the comparison of, a lens design "scientifically" made and final evaluation in an "artistic" manner. The following paper addresses the processes of lens design, manufacture, testing and calibration using a combination of acquired practical experience and modern test and calibration methods. Various performance aspects are separately addressed and considered in terms of different means of measurement.

The State of the Practice of Construction and Demolition Material Recovery

EPA Science Inventory

The C&D recovery industry continues to grow. Some components (e.g., concrete) are commonly recovered for existing economic reasons. Other elements―especially those with low market value and that frequently require processing to separate them from the rest of the C&D stream―remain...

CVISN electronic credentialing for commercial vehicles in Washington State, a case study : easier licensing and credentials processing for the motor carrier industry

DOT National Transportation Integrated Search

2004-09-01

The following case study provides an in-depth view of the deployment of Commercial Vehicle Information Systems and Networks (CVISN) Electronic Credentialing in Washington State. It describes successful practices and lessons learned in operations and ...

The 1995 Medical Device Technology raw materials survey.

PubMed

Pearson, L S

1995-09-01

Using information supplied by manufacturers, this article reports on the use of raw materials and compounding and conversion practices in the European medical device manufacturing industry. The findings of the survey provide an indication of which materials are being used and how frequently, and the process of selecting suppliers.

A New Lean Paradigm in Higher Education: A Case Study

ERIC Educational Resources Information Center

Doman, Mark S.

2011-01-01

Purpose: This case study aims to demonstrate that lean principles and practices utilized in industry can be successfully applied to improve higher education administrative processes through an innovative and engaging learning experience involving undergraduate students. Design/methodology/approach: This is a first-hand account by the instructor of…

Hydroformylation: An Old Yet New Industrial Route to Alcohols.

ERIC Educational Resources Information Center

Pruett, Roy L.

1986-01-01

Discusses trends in hydroformylation chemistry, considering these catalysis and ligands: (1) cobalt, (2) cobalt-phosphine, and (3) rhodium-phosphine. Indicates that rhodium technology will grow in domination of hydroformylation practice. In addition, processes adapted to special cases of functional olefins and to higher olefins can be expected.…

Literature Review: Crud Formation at the Liquid/Liquid Interface of TBP-Based Solvent-Extraction Processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delegard, Calvin H.; Casella, Amanda J.

2016-09-30

This report summarizes the literature reviewed on crud formation at the liquid:liquid interface of solvent extraction processes. The review is focused both on classic PUREX extraction for industrial reprocessing, especially as practiced at the Hanford Site, and for those steps specific to plutonium purification that were used at the Plutonium Reclamation Facility (PRF) within the Plutonium Finishing Plant (PFP) at the Hanford Site.

Quality beyond compliance.

PubMed

Centanni, N; Monroe, M; White, L; Larson, R

1999-01-01

The service sector within the biopharmaceutical industry has experienced phenomenal growth over the past decade. In the highly regulated Good Laboratory Practices environment, the need for timely, high-quality service, accurate results, and on-time deliverables becomes paramount for the success and profitability of biopharmaceutical companies. The quality assurance process is a vital component of this drug product-development cycle and ensures compliance to the highest domestic and international regulatory standards. Quality-assurance professionals historically have held the role of independent auditors of the processes, who certify that results meet current standards of practice. Covance, a contract research organization that includes Good Laboratory Practices laboratories, reorganized and expanded the functional responsibilities of its quality assurance team in 1997. Auditors and quality assurance professionals have assumed roles beyond traditional compliance auditing and are forging new leadership and mentoring roles as process-improvement specialists. The results have been tangible, measurable benefits for clients and the Covance organization. This article provides an overview of this cultural change and the processes put in place to improve efficiency, productivity, and customer and employee satisfaction.

The application of an industry level participatory ergonomics approach in developing MSD interventions.

PubMed

Tappin, D C; Vitalis, A; Bentley, T A

2016-01-01

Participatory ergonomics projects are traditionally applied within one organisation. In this study, a participative approach was applied across the New Zealand meat processing industry, involving multiple organisations and geographical regions. The purpose was to develop interventions to reduce musculoskeletal disorder (MSD) risk. This paper considers the value of an industry level participatory ergonomics approach in achieving this. The main rationale for a participative approach included the need for industry credibility, and to generate MSD interventions that address industry level MSD risk factors. An industry key stakeholder group became the primary vehicle for formal participation. The study resulted in an intervention plan that included the wider work system and industry practices. These interventions were championed across the industry by the key stakeholder group and have extended beyond the life of the study. While this approach helped to meet the study aim, the existence of an industry-supported key stakeholder group and a mandate for the initiative are important prerequisites for success. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Toward a New Industrial America.

ERIC Educational Resources Information Center

Berger, Suzanne; And Others

1989-01-01

Summarizes the positive and negative sides of American industrial practices determined by the Commission on Industrial Productivity at the Massachusetts Institute of Technology. Describes five imperatives recommended by the commission based on its study of current weakness and best practices in American industry. (YP)

Teaching fractional factorial experiments via course delegate designed experiments.

PubMed

Coleman, S; Antony, J

1999-01-01

Industrial experiments are fundamental in enhancing the understanding and knowledge of a process and product behavior. Designed industrial experiments assist people in understanding, investigating, and improving their processes. The purpose of a designed experiment is to understand which factors might influence the process output and then to determine those factor settings that optimize the process output. Teaching "design of experiments" using textbook examples does not fully shed light on how to identify and formulate the problem, identify factors, and determine the performance of the physical experiment. Presented here is an example of how to teach fractional factorial experiments in a course on designed experiments. Also presented is a practical, hands-on experiment that has been found to be extremely successful in instilling confidence and motivation in course delegates. The experiment provides a great stimulus to the delegates for the application of experimental design in their own work environment.

Ethanol production from glycerol using immobilized Pachysolen tannophilus during microaerated repeated-batch fermentor culture.

PubMed

Cha, Hye-Geun; Kim, Yi-Ok; Choi, Woon Yong; Kang, Do-Hyung; Lee, Hyeon-Yong; Jung, Kyung-Hwan

2015-03-01

Herein, we established a repeated-batch process for ethanol production from glycerol by immobilized Pachysolen tannophilus. The aim of this study was to develop a more practical and applicable ethanol production process for biofuel. In particular, using industrial-grade medium ingredients, the microaeration rate was optimized for maximization of the ethanol production, and the relevant metabolic parameters were then analyzed. The microaeration rate of 0.11 vvm, which is far lower than those occurring in a shaking flask culture, was found to be the optimal value for ethanol production from glycerol. In addition, it was found that, among those tested, Celite was a more appropriate carrier for the immobilization of P. tannophilus to induce production of ethanol from glycerol. Finally, through a repeated-batch culture, the ethanol yield (Ye/g) of 0.126 ± 0.017 g-ethanol/g-glycerol (n = 4) was obtained, and this value was remarkably comparable with a previous report. In the future, it is expected that the results of this study will be applied for the development of a more practical and profitable long-term ethanol production process, thanks to the industrial-grade medium preparation, simple immobilization method, and easy repeated-batch operation.

Application of Six Sigma/CAP methodology: controlling blood-product utilization and costs.

PubMed

Neri, Robert A; Mason, Cindy E; Demko, Lisa A

2008-01-01

Blood-product components are a limited commodity whose cost is rising. Many patients benefit from their use, but patients who receive transfusions face an unnecessary increased risk for developing infections; fatal, febrile, or allergic reactions; and circulatory overload. To improve patient care, safety, and resource stewardship, transfusion practices must be evaluated for appropriateness (Wilson et al. 2002). A multihospital health system undertook a rigorous study of blood-product utilization patterns and management processes to address cost-control problems in the organization. The system leveraged two process improvement tools widely implemented outside of the healthcare industry: (1) Six Sigma methodology to identify blood-utilization drivers and to standardize transfusion practice, and (2) change acceleration process model to drive effective change. The initiative resulted in a decreased rate of inappropriate transfusions of packed red blood cell from 16 percent to less than 5 percent, improved clinician use of a blood-component order form, establishment of internal benchmarks, enhanced laboratory-to-clinician communication, and better blood-product expense control. The project further demonstrated how out-of-industry tools and methodologies can be adopted, adapted, and systematically applied to generate positive change (Black and Revere 2006).

A new e-beam application in the pharmaceutical industry

NASA Astrophysics Data System (ADS)

Sadat, Theo; Malcolm, Fiona

2005-10-01

The paper presents a new electron beam application in the pharmaceutical industry: an in-line self-shielded atropic transfer system using electron beam for surface decontamination of products entering a pharmaceutical filling line. The unit was developed by Linac Technologies in response to the specifications of a multi-national pharmaceutical company, to solve the risk of microbial contamination entering a filling line housed inside an isolator. In order to fit the sterilization unit inside the pharmaceutical plant, a "miniature" low-energy (200 keV) electron beam accelerator and e-beam tunnel were designed, all conforming to the pharmaceutical good manufacturing practice (GMP) regulations. Process validation using biological indicators is described, with reference to the regulations governing the pharmaceutical industry. Other industrial applications of a small-sized self-shielded electron beam sterilization unit are mentioned.

Implementing Best Practices and Validation of Cryopreservation Techniques for Microorganisms

PubMed Central

Smith, David; Ryan, Matthew

2012-01-01

Authentic, well preserved living organisms are basic elements for research in the life sciences and biotechnology. They are grown and utilized in laboratories around the world and are key to many research programmes, industrial processes and training courses. They are vouchers for publications and must be available for confirmation of results, further study or reinvestigation when new technologies become available. These biological resources must be maintained without change in biological resource collections. In order to achieve best practice in the maintenance and provision of biological materials for industry, research and education the appropriate standards must be followed. Cryopreservation is often the best preservation method available to achieve these aims, allowing long term, stable storage of important microorganisms. To promulgate best practice the Organisation for Economic Development and Co-operation (OECD published the best practice guidelines for BRCs. The OECD best practice consolidated the efforts of the UK National Culture Collections, the European Common Access to Biological Resources and Information (CABRI) project consortium and the World Federation for Culture Collections. The paper discusses quality management options and reviews cryopreservation of fungi, describing how the reproducibility and quality of the technique is maintained in order to retain the full potential of fungi. PMID:22629202

A linear regression approach to evaluate the green supply chain management impact on industrial organizational performance.

PubMed

Mumtaz, Ubaidullah; Ali, Yousaf; Petrillo, Antonella

2018-05-15

The increase in the environmental pollution is one of the most important topic in today's world. In this context, the industrial activities can pose a significant threat to the environment. To manage problems associate to industrial activities several methods, techniques and approaches have been developed. Green supply chain management (GSCM) is considered one of the most important "environmental management approach". In developing countries such as Pakistan the implementation of GSCM practices is still in its initial stages. Lack of knowledge about its effects on economic performance is the reason because of industries fear to implement these practices. The aim of this research is to perceive the effects of GSCM practices on organizational performance in Pakistan. In this research the GSCM practices considered are: internal practices, external practices, investment recovery and eco-design. While, the performance parameters considered are: environmental pollution, operational cost and organizational flexibility. A set of hypothesis propose the effect of each GSCM practice on the performance parameters. Factor analysis and linear regression are used to analyze the survey data of Pakistani industries, in order to authenticate these hypotheses. The findings of this research indicate a decrease in environmental pollution and operational cost with the implementation of GSCM practices, whereas organizational flexibility has not improved for Pakistani industries. These results aim to help managers regarding their decision of implementing GSCM practices in the industrial sector of Pakistan. Copyright © 2017 Elsevier B.V. All rights reserved.

Fueling industrial biotechnology growth with bioethanol.

PubMed

Otero, José Manuel; Panagiotou, Gianni; Olsson, Lisbeth

2007-01-01

Industrial biotechnology is the conversion of biomass via biocatalysis, microbial fermentation, or cell culture to produce chemicals, materials, and/or energy. Industrial biotechnology processes aim to be cost-competitive, environmentally favorable, and self-sustaining compared to their petrochemical equivalents. Common to all processes for the production of energy, commodity, added value, or fine chemicals is that raw materials comprise the most significant cost fraction, particularly as operating efficiencies increase through practice and improving technologies. Today, crude petroleum represents the dominant raw material for the energy and chemical sectors worldwide. Within the last 5 years petroleum prices, stability, and supply have increased, decreased, and been threatened, respectively, driving a renewed interest across academic, government, and corporate centers to utilize biomass as an alternative raw material. Specifically, bio-based ethanol as an alternative biofuel has emerged as the single largest biotechnology commodity, with close to 46 billion L produced worldwide in 2005. Bioethanol is a leading example of how systems biology tools have significantly enhanced metabolic engineering, inverse metabolic engineering, and protein and enzyme engineering strategies. This enhancement stems from method development for measurement, analysis, and data integration of functional genomics, including the transcriptome, proteome, metabolome, and fluxome. This review will show that future industrial biotechnology process development will benefit tremendously from the precedent set by bioethanol - that enabling technologies (e.g., systems biology tools) coupled with favorable economic and socio-political driving forces do yield profitable, sustainable, and environmentally responsible processes. Biofuel will continue to be the keystone of any industrial biotechnology-based economy whereby biorefineries leverage common raw materials and unit operations to integrate diverse processes to produce demand-driven product portfolios.

Aerobic granulation in a sequencing batch reactor (SBR) for industrial wastewater treatment.

PubMed

Inizan, M; Freval, A; Cigana, J; Meinhold, J

2005-01-01

Aerobic granulation seems to be an a attractive process for COD removal from industrial wastewater, characterised by a high content of soluble organic compounds. In order to evaluate the practical aspects of the process, comparative experimental tests are performed on synthetic and on industrial wastewater, originating from pharmaceutical industry. Two pilot plants are operated as sequencing batch bubble columns. Focus was put on the feasibility of the process for high COD removal and on its operational procedure. For both wastewaters, a rapid formation of aerobic granules is observed along with a high COD removal rate. Granule characteristics are quite similar with respect to the two types of wastewater. It seems that filamentous bacteria are part of the granule structure and that phosphorus precipitation can play an important role in granule formation. For both wastewaters similar removal performances for dissolved biodegradable COD are observed (> 95%). However, a relatively high concentration of suspended solids in the outlet deteriorates the performance with regard to total COD removal. Biomass detachment seems to play a non-negligible role in the current set-up. After a stable operational phase the variation of the pharmaceutical wastewater caused a destabilisation and loss of the granules, despite the control for balanced nutrient supply. The first results with real industrial wastewater demonstrate the feasibility of this innovative process. However, special attention has to be paid to the critical aspects such as granule stability as well as the economic competitiveness, which both will need further investigation and evaluation.

Advances in industrial biopharmaceutical batch process monitoring: Machine-learning methods for small data problems.

PubMed

Tulsyan, Aditya; Garvin, Christopher; Ündey, Cenk

2018-04-06

Biopharmaceutical manufacturing comprises of multiple distinct processing steps that require effective and efficient monitoring of many variables simultaneously in real-time. The state-of-the-art real-time multivariate statistical batch process monitoring (BPM) platforms have been in use in recent years to ensure comprehensive monitoring is in place as a complementary tool for continued process verification to detect weak signals. This article addresses a longstanding, industry-wide problem in BPM, referred to as the "Low-N" problem, wherein a product has a limited production history. The current best industrial practice to address the Low-N problem is to switch from a multivariate to a univariate BPM, until sufficient product history is available to build and deploy a multivariate BPM platform. Every batch run without a robust multivariate BPM platform poses risk of not detecting potential weak signals developing in the process that might have an impact on process and product performance. In this article, we propose an approach to solve the Low-N problem by generating an arbitrarily large number of in silico batches through a combination of hardware exploitation and machine-learning methods. To the best of authors' knowledge, this is the first article to provide a solution to the Low-N problem in biopharmaceutical manufacturing using machine-learning methods. Several industrial case studies from bulk drug substance manufacturing are presented to demonstrate the efficacy of the proposed approach for BPM under various Low-N scenarios. © 2018 Wiley Periodicals, Inc.

Solar Access Public Capital (SAPC) Working Group: Best Practices in PV Operations and Maintenance; Version 1.0, March 2015; Period of Performance, January 1, 2014 - December 31, 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keating, T. J.; Walker, A.; Ardani, K.

2015-03-01

This PV O&M Best Practices Guide is designed to improve solar asset transparency for investors and rating agencies, provide an industry framework for quality management, and reduce transaction costs in the solar asset securitization process. The PV O&M Best Practices Guide is intended to outline the minimum requirements for third-party ownership providers (“Providers”). Adherence to the guide is voluntary. Providers that adhere to the guide are responsible for selfcertifying that they have fulfilled the guide requirements.

Experience of High School Cooperation with Manufacturing Enterprise While Training Rocket and Space Industry Experts

NASA Astrophysics Data System (ADS)

Novykov, O.; Dzhur, Y.; Perlyk, V.

2002-01-01

Cooperation between Yuzhnoye SDO and Dniepropetrovsk National University (Physical and Engineering Institute) constitutes an example for the efficient practical realization of the idea of integration of science, industry and education, i.e. scientists and industrial experts take an active part in educational process while teachers and students participate in resolution of vital scientific and technical problems. The report is devoted to a summary analysis of such cooperation, which during the creation of Dniepropetrovsk Rocket Center, the largest in the former USSR, helped solving the relevant employment issues and contributed to foundation of Dniepropetrovsk scientific rocket school in the shortest possible time. Later, the cooperation was of avail in adequate reinforcement of the rocket and space industry with highly skilled experts (more than 20 thousand experts have graduated during 50 years). The University department branches representative of principal schools, i.e. rocket and spacecraft design and manufacture, engine design, automated control systems, production practice etc. established at the company's premises resolve vital issues related to improvement of expert training reliability. The department branches successfully resolve the tasks associated with prompt adaptation of the experts by comprehensively accounting both for the needs of the industry and the company's development outlook as well as by involving up-to-date manufacturing equipment in educational process, during researches, etc. Recently a new entity has been established playing an important role in building a continuous aerospace education system. This entity is called the National Center for aerospace education of Ukrainian youth, which unites high and higher school students, young scientists, and allows resolving different tasks ranging from searching and selecting gifted youth to training of highly skilled scientists.

Conducting a paediatric multi-centre RCT with an industry partner: challenges and lessons learned.

PubMed

Maskell, Jessica; Newcombe, Peter; Martin, Graham; Kimble, Roy

2012-11-01

There are many benefits of multi-centred research including large sample sizes, statistical power, timely recruitment and generalisability of results. However, there are numerous considerations when planning and implementing a multi-centred study. This article reviews the challenges and successes of planning and implementing a multi-centred prospective randomised control trial involving an industry partner. The research investigated the impact on psychosocial functioning of a cosmetic camouflage product for children and adolescents with burn scarring. Multi-centred studies commonly have many stakeholders. Within this study, six Australian and New Zealand paediatric burn units as well as an industry partner were involved. The inclusion of an industry partner added complexities as they brought different priorities and expectations to the research. Further, multifaceted ethical and institutional approval processes needed to be negotiated. The challenges, successes, lessons learned and recommendations from this study regarding Australian and New Zealand ethics and research governance approval processes, collaboration with industry partners and the management of differing expectations will be outlined. Recommendations for future multi-centred research with industry partners include provision of regular written reports for the industry partner; continual monitoring and prompt resolution of concerns; basic research practices education for industry partners; minimisation of industry partner contact with participants; clear roles and responsibilities of all stakeholders and utilisation of single ethical review if available. © 2012 The Authors. Journal of Paediatrics and Child Health © 2012 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Plastics processing: statistics, current practices, and evaluation.

PubMed

Cooke, F

1993-11-01

The health care industry uses a huge quantity of plastic materials each year. Much of the machinery currently used, or supplied, for plastics processing is unsuitable for use in a clean environment. In this article, the author outlines the reasons for the current situation and urges companies to re-examine their plastic-processing methods, whether performed in-house or subcontracted out. Some of the factors that should be considered when evaluating plastics-processing equipment are outlined to assist companies in remaining competitive and complying with impending EC regulations on clean room standards for manufacturing areas.

Contact Angle of Drops Measured on Nontransparent Surfaces and Capillary Flow Visualized

NASA Technical Reports Server (NTRS)

Chao, David F.; Zhang, Nengli

2003-01-01

The spreading of a liquid on a solid surface is important for various practical processes, and contact-angle measurements provide an elegant method to characterize the interfacial properties of the liquid with the solid substrates. The complex physical processes occurring when a liquid contacts a solid play an important role in determining the performance of chemical processes and materials. Applications for these processes are in printing, coating, gluing, textile dyeing, and adhesives and in the pharmaceutical industry, biomedical research, adhesives, flat panel display manufacturing, surfactant chemistry, and thermal engineering.

Lifetime evaluation of large format CMOS mixed signal infrared devices

NASA Astrophysics Data System (ADS)

Linder, A.; Glines, Eddie

2015-09-01

New large scale foundry processes continue to produce reliable products. These new large scale devices continue to use industry best practice to screen for failure mechanisms and validate their long lifetime. The Failure-in-Time analysis in conjunction with foundry qualification information can be used to evaluate large format device lifetimes. This analysis is a helpful tool when zero failure life tests are typical. The reliability of the device is estimated by applying the failure rate to the use conditions. JEDEC publications continue to be the industry accepted methods.

Modular magazine for suitable handling of microparts in industry

NASA Astrophysics Data System (ADS)

Grimme, Ralf; Schmutz, Wolfgang; Schlenker, Dirk; Schuenemann, Matthias; Stock, Achim; Schaefer, Wolfgang

1998-01-01

Microassembly and microadjustment techniques are key technologies in the industrial production of hybrid microelectromechanical systems. One focal point in current microproduction research and engineering is the design and development of high-precision microassembly and microadjustment equipment capable of operating within the framework of flexible automated industrial production. As well as these developments, suitable microassembly tools for industrial use also need to be equipped with interfaces for the supply and delivery of microcomponents. The microassembly process necessitates the supply of microparts in a geometrically defined manner. In order to reduce processing steps and production costs, there is a demand for magazines capable of providing free accessibility to the fixed microcomponents. Commonly used at present are feeding techniques, which originate from the field of semiconductor production. However none of these techniques fully meets the requirements of industrial microassembly technology. A novel modular magazine set, developed and tested in a joint project, is presented here. The magazines are able to hold microcomponents during cleaning, inspection and assembly without nay additional handling steps. The modularity of their design allows for maximum technical flexibility. The modular magazine fits into currently practiced SEMI standards. The design and concept of the magazine enables industrial manufacturers to promote a cost-efficient and flexible precision assembly of microelectromechanical systems.

Translating cell-based regenerative medicines from research to successful products: challenges and solutions.

PubMed

Bayon, Yves; Vertès, Alain A; Ronfard, Vincent; Egloff, Matthieu; Snykers, Sarah; Salinas, Gabriella Franco; Thomas, Robert; Girling, Alan; Lilford, Richard; Clermont, Gaelle; Kemp, Paul

2014-08-01

The Tissue Engineering & Regenerative Medicine International Society-Europe (TERMIS-EU) Industry Committee as well as its TERMIS-Americas (AM) counterpart intend to address the specific challenges and needs facing the industry in translating academic research into commercial products. Over the last 3 years, the TERMIS-EU Industry Committee has worked with commercial bodies to deliver programs that encourage academics to liaise with industry in proactive collaborations. The TERMIS-EU 2013 Industry Symposium aimed to build on this commercial agenda by focusing on two topics: Operations Management (How to move a process into the good manufacturing practice [GMP] environment) and Clinical Translation (Moving a GMP process into robust trials). These topics were introduced by providing the synergistic business perspective of partnering between the multiple regenerative medicine stakeholders, throughout the life cycle of product development. Seven industry leaders were invited to share their experience, expertise, and strategies. Due to the complex nature of regenerative medicine products, partnering for their successful commercial development seems inevitable to overcome all obstacles by sharing experiences and expertise of all stakeholders. When ideally implemented, the "innovation quotient" of a virtual team resulting from the combination of internal and external project teams can be maximized through maximizing the three main dimensions: core competences, technology portfolio, and alliance management.

Development of superconducting high gradient magnetic separation system for highly viscous fluid for practical use

NASA Astrophysics Data System (ADS)

Hayashi, S.; Mishima, F.; Akiyama, Y.; Nishijima, S.

2011-11-01

In the industrial plants processing highly viscous fluid such as foods or industrial products, it is necessary to remove the metallic wear debris originating from pipe in manufacturing line which triggers quality loss. In this study, we developed a high gradient magnetic separation (HGMS) system which consists of superconducting magnet to remove the metallic wear debris. The magnetic separation experiment and the particle trajectory simulation were conducted with polyvinyl alcohol (PVA) as a model material (viscosity coefficient was 10 Pa s, which is 10,000 times higher than that in water). In order to develop a magnetic separation system for practical use, the particle trajectory simulation by using solenoidal superconducting magnet was conducted, and the possibility of the magnetic separation for removing ferromagnetic stainless steel (SUS) particles in highly viscous fluid of 10 Pa s was indicated. Based on the results, the number of filters to obtain required separation efficiency was examined to design the practical separation system.

Readings in Systems Engineering

NASA Technical Reports Server (NTRS)

Hoban, Francis T. (Editor); Lawbaugh, William M. (Editor)

1993-01-01

This present collection was inspired by seven papers prepared by the NASA Alumni League, illustrating the members' systems engineering experience. These papers make up the heart of this collection. We have supplemented them with papers describing industry processes and other governmental practices to illustrate the diversity of systems engineering as it is formulated and practiced. This is one discipline that clearly benefits from cross-fertilization and infusion of new ideas. There is also a wide variety of tools and techniques described herein, some standard and some unique.

Agile Development Methods for Space Operations

NASA Technical Reports Server (NTRS)

Trimble, Jay; Webster, Chris

2012-01-01

Main stream industry software development practice has gone from a traditional waterfall process to agile iterative development that allows for fast response to customer inputs and produces higher quality software at lower cost. How can we, the space ops community, adopt state of the art software development practice, achieve greater productivity at lower cost, and maintain safe and effective space flight operations? At NASA Ames, we are developing Mission Control Technologies Software, in collaboration with Johnson Space Center (JSC) and, more recently, the Jet Propulsion Laboratory (JPL).

Concurrency in product realization

NASA Astrophysics Data System (ADS)

Kelly, Michael J.

1994-03-01

Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.

SuperJet International case study: a business network start-up in the aeronautics industry

NASA Astrophysics Data System (ADS)

Corallo, Angelo; de Maggio, Marco; Storelli, Davide

This chapter presents the SuperJet International case study, a start-up in the aeronautics industry characterized by a process-oriented approach and a complex and as yet evolving network of partnerships and collaborations. The chapter aims to describe the key points of the start-up process, highlighting common factors and differences compared to the TEKNE Methodology of Change, with particular reference to the second and third phase, namely, the design and deployment of new techno-organizational systems. The SuperJet International startup is presented as a case study where strategic and organizational aspects have been jointly conceived from a network-driven perspective. The chapter compares some of the guidelines of the TEKNE Methodology of Change with experiences and actual practices deriving from interviews with key players in SJI's start-up process.

Enzymes- An Existing and Promising Tool of Food Processing Industry.

PubMed

Ray, Lalitagauri; Pramanik, Sunita; Bera, Debabrata

2016-01-01

The enzyme catalyzed process technology has enormous potential in the food sectors as indicated by the recent patents studies. It is very well realized that the adaptation of the enzyme catalyzed process depends on the availability of enzyme in affordable prices. Enzymes may be used in different food sectors like dairy, fruits & vegetable processing, meat tenderization, fish processing, brewery and wine making, starch processing and many other. Commercially only a small number of enzymes are used because of several factors including instability of enzymes during processing and high cost. More and more enzymes for food technology are now derived from specially selected or genetically modified microorganisms grown in industrial scale fermenters. Enzymes with microbial source have commercial advantages of using microbial fermentation rather than animal and plant extraction to produce food enzymes. At present only a relatively small number of enzymes are used commercially in food processing. But the number is increasing day by day and field of application will be expanded more and more in near future. The purpose of this review is to describe the practical applications of enzymes in the field of food processing.

Influence of temperature and fish thickness on the mass transfer kinetics during the cod (Gadus morhua) desalting process.

PubMed

Oliveira, Helena; Gonçalves, Amparo; Nunes, Maria L; Vaz-Pires, Paulo; Costa, Rui

2016-10-01

The aim of this study was to analyse the influence of desalting temperature, fish thickness and desalting time on the mass transfer kinetics during the cod desalting process by physico-chemical analyses. Both water uptake and salt loss increased with increasing temperature (15 °C > 10 °C > 5 °C) up to 24 h in 'thicker' pieces. The equilibrium achievement was faster in 'thinner' pieces and also with increasing temperature. Longer desalting times at 10 °C can be a good practice to be used during cod desalting at an industrial scale in order to obtain commercial products with higher yields. The faster mass transfer during desalting of 'thinner' pieces appears to follow three periods as a result of diffusion of the components (water, NaCl, and soluble proteins) because of the concentration differences, and pressure gradients due to expansion/shrinkage of the protein matrix, which is dependent on the NaCl content. The refractive index can be used by industry as an indirect measurement to determine the moment at which the 'thicker' samples are near the Z(NaCl) = Y(NaCl) equilibrium. Optimum combinations between the process variables analysed are essential in order to speed up the mass transfer kinetics during cod desalting at an industrial scale. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Best Practices for Wind Energy Development in the Great Lakes Region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pebbles, Victoria; Hummer, John; Haven, Celia

2011-07-19

This report offers a menu of 18 different, yet complementary, preferred practices and policies. The best practices cover all phases of the wind energy development process - from the policies that allow for wind development, to the sustainable operation of a wind project, to the best practices for decommissioning a spent turbine - including applications for offshore wind. Each best practice describes the opportunities and challenges (pros and cons), and offers a case example that illustrates how that best practice is being utilized by a particular jurisdiction or wind project. The practices described in this publication were selected by amore » diverse group of interests from the Great Lakes Wind Collaborative that included environmental groups, industry, academia, and federal, state and local government regulators. The practices were identified through a year-long process that included a literature review, online survey and interviews with individuals from the public, private and non-profit sectors. Optimally, a suite of these best practices would be applied in an appropriate combination to fit the conditions of a particular wind project or a set of wind projects within a given locality or region.« less

A Roadmap for the Implementation of Continued Process Verification.

PubMed

Boyer, Marcus; Gampfer, Joerg; Zamamiri, Abdel; Payne, Robin

2016-01-01

In 2014, the members of the BioPhorum Operations Group (BPOG) produced a 100-page continued process verification case study, entitled "Continued Process Verification: An Industry Position Paper with Example Protocol". This case study captures the thought processes involved in creating a continued process verification plan for a new product in response to the U.S. Food and Drug Administration's guidance on the subject introduced in 2011. In so doing, it provided the specific example of a plan developed for a new molecular antibody product based on the "A MAb Case Study" that preceded it in 2009.This document provides a roadmap that draws on the content of the continued process verification case study to provide a step-by-step guide in a more accessible form, with reference to a process map of the product life cycle. It could be used as a basis for continued process verification implementation in a number of different scenarios: For a single product and process;For a single site;To assist in the sharing of data monitoring responsibilities among sites;To assist in establishing data monitoring agreements between a customer company and a contract manufacturing organization. The U.S. Food and Drug Administration issued guidance on the management of manufacturing processes designed to improve quality and control of drug products. This involved increased focus on regular monitoring of manufacturing processes, reporting of the results, and the taking of opportunities to improve. The guidance and practice associated with it is known as continued process verification This paper summarizes good practice in responding to continued process verification guidance, gathered from subject matter experts in the biopharmaceutical industry. © PDA, Inc. 2016.

Anaerobic Treatment of Municipal Solid Waste and Sludge for Energy Production and Recycling of Nutrients

NASA Astrophysics Data System (ADS)

Leinonen, S.

This volume contains 18 papers presented at a Nordic workshop dealing with application of anaerobic decomposition processes on various types of organic wastes, held at the Siikasalmi Research and Experimental Station of the University of Joensuu on 1-2 Oct. 1992. Subject coverage of the presentations extends from the biochemical and microbiological principles of organic waste processing to descriptions and practical experiences of various types of treatment plants. The theoretical and experimental papers include studies on anaerobic and thermophilic degradation processes, methanogenesis, effects of hydrogen, treatment of chlorinated and phenolic compounds, and process modeling, while the practical examples range from treatment of various types of municipal, industrial, and mining wastes to agricultural and fish farm effluents. The papers provide technical descriptions of several biogas plants in operation. Geographically, the presentations span the Nordic and Baltic countries.

Continuous Manufacturing in Pharmaceutical Process Development and Manufacturing.

PubMed

Burcham, Christopher L; Florence, Alastair J; Johnson, Martin D

2018-06-07

The pharmaceutical industry has found new applications for the use of continuous processing for the manufacture of new therapies currently in development. The transformation has been encouraged by regulatory bodies as well as driven by cost reduction, decreased development cycles, access to new chemistries not practical in batch, improved safety, flexible manufacturing platforms, and improved product quality assurance. The transformation from batch to continuous manufacturing processing is the focus of this review. The review is limited to small, chemically synthesized organic molecules and encompasses the manufacture of both active pharmaceutical ingredients (APIs) and the subsequent drug product. Continuous drug product is currently used in approved processes. A few examples of production of APIs under current good manufacturing practice conditions using continuous processing steps have been published in the past five years, but they are lagging behind continuous drug product with respect to regulatory filings.

Lasers for industrial production processing: tailored tools with increasing flexibility

NASA Astrophysics Data System (ADS)

Rath, Wolfram

2012-03-01

High-power fiber lasers are the newest generation of diode-pumped solid-state lasers. Due to their all-fiber design they are compact, efficient and robust. Rofin's Fiber lasers are available with highest beam qualities but the use of different process fiber core sizes enables the user additionally to adapt the beam quality, focus size and Rayleigh length to his requirements for best processing results. Multi-mode fibers from 50μm to 600μm with corresponding beam qualities of 2.5 mm.mrad to 25 mm.mrad are typically used. The integrated beam switching modules can make the laser power available to 4 different manufacturing systems or can share the power to two processing heads for parallel processing. Also CO2 Slab lasers combine high power with either "single-mode" beam quality or higher order modes. The wellestablished technique is in use for a large number of industrial applications, processing either metals or non-metallic materials. For many of these applications CO2 lasers remain the best choice of possible laser sources either driven by the specific requirements of the application or because of the cost structure of the application. The actual technical properties of these lasers will be presented including an overview over the wavelength driven differences of application results, examples of current industrial practice as cutting, welding, surface processing including the flexible use of scanners and classical optics processing heads.

16 CFR 18.0 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.0 Definitions. Industry products. As used in this part, the term industry products includes all types of trees... greenhouse plants solely for inside culture or use and annual vegetable plants. Industry members. Any person...

16 CFR 18.0 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.0 Definitions. Industry products. As used in this part, the term industry products includes all types of trees... greenhouse plants solely for inside culture or use and annual vegetable plants. Industry members. Any person...

Two Decades of Laccases: Advancing Sustainability in the Chemical Industry

DOE PAGES

Cannatelli, Mark D.; Ragauskas, Arthur J.

2016-08-05

Given the current state of environmental affairs and that our future on this planet as we know it is in jeopardy, research and development into greener and more sustainable technologies within the chemical and forest products industries is at its peak. The need for environmentally benign practices is propelling new green processes, given the global scale of these industries. These challenges are also impacting academic research and our reagents of interest are laccases. Furthermore, these enzymes are employed in a variety of biotechnological applications due to their native function as catalytic oxidants. They are about as green as it getsmore » when it comes to chemical processes, requiring O 2 as their only co-substrate and producing H 2O as the sole by-product. The following account will review our twenty year journey on the use of these enzymes within our research group, from their initial use in biobleaching of kraft pulps and for fiber modification within the pulp and paper industry, to their current application as green catalytic oxidants in the field of synthetic organic chemistry.« less

Information systems: Characteristics of an IIoT concept implementation at a fish processing enterprise

NASA Astrophysics Data System (ADS)

Votinov, M. V.; Ershov, M. A.

2018-05-01

This research focuses on relevant questions of the Industrial Internet of Things (IIoT) concept development and implementation at the enterprise. Lately IIoT has been widely publicized as a part of Industry 4.0. In this article the features of the information system development are presented, including SOA telecommunications that allow the remote access and control of the ongoing technological process with mobile devices. The capacity of the developed system is shown. The realization of the data exchange between developed telecommunications is highlighted. The practice of using the telecommunications, developed within the IIoT, has shown positive results and become the basics of implementation of an integrated information system that would link the other enterprise's objects.

Improving Tools and Processes in Mechanical Design Collaboration

NASA Technical Reports Server (NTRS)

Briggs, Clark

2009-01-01

Cooperative product development projects in the aerospace and defense industry are held hostage to high cost and risk due to poor alignment of collaborative design tools and processes. This impasse can be broken if companies will jointly develop implementation approaches and practices in support of high value working arrangements. The current tools can be used to better advantage in many situations and there is reason for optimism that tool vendors will provide significant support.

Contribution of student involvement in production/service unit and experience of industry practices to entrepreneurial attitude and the impact entrepeneurship readiness of vocational high school students of great Malang

NASA Astrophysics Data System (ADS)

Mukminna, Halimahtus; Isnandar, Muladi

2017-09-01

Purpose of this research was to determine the contribution of student involvement in production/ service unit (X1), experience of industry practices (X2), and entrepreneurial attitude (Y) towards readiness entrepreneurship (Z) of vocational student regional Malang. The design of the study using a quantitative approach. The samples used as many as 130 respondents. Instruments used for collecting data in the form of questionnaires. Data analysis included descriptive and test of hypothesis. The result showed: that the description of data on the level of student involvement in production/ service unit, experience of industry practices, entrepreneurial attitude and entrepreneurship readiness in the high category. The contribution student involvement in production/ service unit of entrepreneurial attitude of 10.6%. The contribution experience of industry practices of entrepreneurial attitude of 17.4%. The contribution student involvement in production/ service unit and experience of industry practices simultaneously to entrepreneurial attitude of 44.1%. The contribution student involvement in production/ service unit of readiness entrepreneurship of 4%. The contribution experience of industry practices of readiness entrepreneurship of 5%. The contribution entrepreneurial attitude of readiness entrepreneurship of 16%. Finally, the contribution student involvement in production/ service unit, experience of industry practices, and entrepreneurial attitude simultaneously to readiness entrepreneurship of 50.3%.

Good manufacturing practice (GMP) compliance in the biologics sector: plasma fractionation.

PubMed

Ways, J P; Preston, M S; Baker, D; Huxsoll, J; Bablak, J

1999-12-01

The U.S. blood supply is the safest it has ever been. Due to blood safety and the introduction of viral inactivation/clearance technologies, protein therapies derived from human blood have also in recent years had a history of product safety. Nevertheless, since 1995, the plasma-fractionation industry has experienced increased compliance-related actions by the Food and Drug Administration (FDA), as shown by a substantive increase in the number of FDA 483 inspectional observations, FDA warning letters and other FDA regulatory action. An evaluation of these trends shows that they reflect the implementation by the FDA of increased inspectional interest in the plasma-fractionation industry and an evolution of inspectional practices and standards of current good manufacturing practice (cGMP). Plasma fractionators have responded to FDA actions by carefully evaluating and addressing each inspectional observation, assessing impact to product and taking appropriate actions, including corrective actions to prevent future occurrence. They have made major investments in facilities, quality systems, personnel and training to meet the evolving standards of cGMP and in an effort to implement these standards systemically. Through industry associations, manufacturers have further enhanced product safety by adopting additional voluntary standards for plasma to prevent the entry of potentially unsuitable plasma into the production process. The industry remains committed to application of cGMP and to working with the FDA in further evolution of these standards while striving to assure a continued supply of safe, pure and effective plasma-derived therapies.

Defense Programs benchmarking in Chicago, April 1994: Identifying best practices in the pollution prevention programs of selected private industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-12-01

The Office of Defense Programs (DP) was the first US Department of Energy (DOE) Cognizant Secretarial Office (CSO) to attempt to benchmark private industries for best-in-class practices in the field of pollution prevention. Defense Programs` intent in this effort is to identify and bring to DOE field offices strategic and technological tools that have helped private companies minimize waste and prevent pollution. Defense Programs` premier benchmarking study focused on business practices and process improvements used to implement exceptional pollution prevention programs in four privately owned companies. The current interest in implementing partnerships information exchange, and technology transfer with the privatemore » sector prompted DP to continue to seek best practices in the area of pollution prevention through a second benchmarking endeavor in May 1994. This report presents the results of that effort. The decision was made to select host facilities that own processes similar to those at DOE plants and laboratories, that have programs that have been recognized on a local or national level, that have an interest in partnering with the Department on an information-sharing basis, and that are located in proximity to each other. The DP benchmarking team assessed the pollution prevention programs of five companies in the Chicago area--GE Plastics, Navistar, Northrop Corporation, Sundstrand and Caterpillar. At all facilities visited, Ozone Depleting Compounds (ODCs), hazardous wastes, releases under the Superfund Amendments and Reauthorization Act (SARA), waste water and non-hazardous wastes are being eliminated, replaced, reduced, recycled and reused whenever practicable.« less

Implementation of Industrial Work Practice management at vocational high school

NASA Astrophysics Data System (ADS)

Widodo, Joko; Samsudi, Sunyoto

2017-03-01

The purpose of this study was to develop a management model of entrepreneurship-based Industrial Work Practice (Prakerin) at Vocational High School. This research was planned for three years under Research and Development design. The respondents were public and private Vocational High Schools in Semarang, Salatiga and District of Demak, Central Java, Indonesia. Data were collected through interviews, questionnaires, observation, and documentation. The data were analyzed qualitatively and quantitatively. Preliminary study shows that the implementation of Industrial Work Practice at Vocational High School, which has been carried out, was only to prepare the graduates to become an employee of the industry instead of entrepreneur. Further study is needed to develop a management model of entrepreneurship-based Industrial Work Practice at Vocational High School.

Perfluorooctane sulfonate plasma half-life determination and long term tissue distribution in beef cattle (Bos taurus)

USDA-ARS?s Scientific Manuscript database

Perfluorooctane sulfonate (PFOS) is used in consumer products as a surfactant and is found in industrial and consumer waste which ends up in wastewater treatment plants (WWTPs). PFOS does not breakdown during WWTP processes and accumulates in the biosolids. Common practices include application of bi...

Microscale Synthesis of Chiral Alcohols via Asymmetric Catalytic Transfer Hydrogenation

ERIC Educational Resources Information Center

Peeters, Christine M.; Deliever, Rik; De Vos, Dirk

2009-01-01

Synthesis of pure enantiomers is a key issue in industry, especially in areas connected to life sciences. Catalytic asymmetric synthesis has emerged as a powerful and practical tool. Here we describe an experiment on racemic reduction and asymmetric reduction via a catalytic hydrogen transfer process. Acetophenone and substituted acetophenones are…

Aquatic selenium pollution is a global environmental safety issue

Treesearch

A. Dennis Lemly

2004-01-01

Selenium pollution is a worldwide phenomenon and is associated with a broad spectrum of human activities, ranging from the most basic agricultural practices to the most high-tech industrial processes. Consequently, selenium contamination of aquatic habitats can take place in urban, suburban, and rural settings alike--from mountains to plains, from deserts to...

Become a Star: Teaching the Process of Design and Implementation of an Intelligent System

ERIC Educational Resources Information Center

Venables, Anne; Tan, Grace

2005-01-01

Teaching future knowledge engineers, the necessary skills for designing and implementing intelligent software solutions required by business, industry and research today, is a very tall order. These skills are not easily taught in traditional undergraduate computer science lectures; nor are the practical experiences easily reinforced in laboratory…

A Socio-Technical Analysis of Knowledgeable Practice in Radiation Therapy

ERIC Educational Resources Information Center

Lozano, Reynaldo Garza

2012-01-01

The role of the modern radiation therapist is directed and driven by the organizational system. Changes affecting their role are implemented as a response to changes in the industry. Operations of the modern cancer center, with new and changing treatment technologies bring questions regarding the learning process of radiation therapists at a time…

Roles of surfactants in flotation deinking

Treesearch

Yulin Zhao; Yulin Deng; J.Y. Zhu

2004-01-01

Flotation deinking is a common practice for removing ink from wastepaper, and it is becoming a key process in many recycling paper mills. Flotation deinking was successfully introduced to the paper recycling industry in the 1980s, and its applications in wax removal, sticky control, and fiber fractionation have attracted great research interest. A successful flotation...

Building an efficient supply chain.

PubMed

Scalise, Dagmara

2005-08-01

Realizing at last that supply chain management can produce efficiencies and save costs, hospitals are beginning to adopt practices from other industries, such as the concept of extended supply chains, to improve product flow. They're also investing in enterprise planning resource software, radio frequency identification and other technologies, using quality data to drive standardization and streamlining processes.

Post-Implementation Success Factors for Enterprise Resource Planning Student Administration Systems in Higher Education Institutions

ERIC Educational Resources Information Center

Sullivan, Linda; Bozeman, William

2010-01-01

Enterprise Resource Planning (ERP) systems can represent one of the largest investments of human and financial resources by a higher education institution. They also bring a significant process reengineering aspect to the institution and the associated implementation project through the integration of compiled industry best practices into the…

Models of Organizational Learning: Paradoxes and Best Practices in the Post Industrial Workplace.

ERIC Educational Resources Information Center

Laiken, Marilyn E.

A research project studied Canadian organizations that are using informal organizational learning approaches to embed ongoing learning within the actual work processes. Five organizations that self-identified as learning organizations at mature stages of development were studied in depth. No organization was a paragon of organizational learning.…

Markets Hidden on Thoroughfares: The Social Construction of Economic Informality/Illegality in Beijing's Zhongguancun, China

ERIC Educational Resources Information Center

Chang, Ho-Jun

2009-01-01

This dissertation deals with the tense relation between the visibility of unauthorized economic practices and the invisibility of law in Zhongguancun (ZGC) Beijing, a Chinese information technology (IT) industry center dubbed "China's Silicon Valley." This dissertation ethnographically examines the double process of extra-legal/illegal…

16 CFR 18.8 - Deception as to origin or source of industry products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

16 CFR 18.8 - Deception as to origin or source of industry products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

16 CFR 18.8 - Deception as to origin or source of industry products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

16 CFR 18.8 - Deception as to origin or source of industry products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is an unfair or deceptive act or practice to sell, offer for sale, or advertise an industry product by...

Do We Believe the Tobacco Industry Lied to Us? Association with Smoking Behavior in a Military Population

ERIC Educational Resources Information Center

Klesges, Robert C.; Sherrill-Mittleman, Deborah A.; Debon, Margaret; Talcott, G. Wayne; Vanecek, Robert J.

2009-01-01

Despite the dangers of smoking, tobacco companies continue to impede tobacco control efforts through deceptive marketing practices. Media campaigns that expose these practices have been effective in advancing anti-industry attitudes and reducing smoking initiation among young people, yet the association between knowledge of industry practices and…

Simulation and optimization of a coking wastewater biological treatment process by activated sludge models (ASM).

PubMed

Wu, Xiaohui; Yang, Yang; Wu, Gaoming; Mao, Juan; Zhou, Tao

2016-01-01

Applications of activated sludge models (ASM) in simulating industrial biological wastewater treatment plants (WWTPs) are still difficult due to refractory and complex components in influents as well as diversity in activated sludges. In this study, an ASM3 modeling study was conducted to simulate and optimize a practical coking wastewater treatment plant (CWTP). First, respirometric characterizations of the coking wastewater and CWTP biomasses were conducted to determine the specific kinetic and stoichiometric model parameters for the consecutive aeration-anoxic-aeration (O-A/O) biological process. All ASM3 parameters have been further estimated and calibrated, through cross validation by the model dynamic simulation procedure. Consequently, an ASM3 model was successfully established to accurately simulate the CWTP performances in removing COD and NH4-N. An optimized CWTP operation condition could be proposed reducing the operation cost from 6.2 to 5.5 €/m(3) wastewater. This study is expected to provide a useful reference for mathematic simulations of practical industrial WWTPs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Technology transfer through a network of standard methods and recommended practices - The case of petrochemicals

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.; Karvounis, Sotirios

2012-12-01

Technology transfer may take place in parallel with cooperative action between companies participating in the same organizational scheme or using one another as subcontractor (outsourcing). In this case, cooperation should be realized by means of Standard Methods and Recommended Practices (SRPs) to achieve (i) quality of intermediate/final products according to specifications and (ii) industrial process control as required to guarantee such quality with minimum deviation (corresponding to maximum reliability) from preset mean values of representative quality parameters. This work deals with the design of the network of SRPs needed in each case for successful cooperation, implying also the corresponding technology transfer, effectuated through a methodological framework developed in the form of an algorithmic procedure with 20 activity stages and 8 decision nodes. The functionality of this methodology is proved by presenting the path leading from (and relating) a standard test method for toluene, as petrochemical feedstock in the toluene diisocyanate production, to the (6 generations distance upstream) performance evaluation of industrial process control systems (ie., from ASTM D5606 to BS EN 61003-1:2004 in the SRPs network).

Managing health and safety risks: Implications for tailoring health and safety management system practices.

PubMed

Willmer, D R; Haas, E J

2016-01-01

As national and international health and safety management system (HSMS) standards are voluntarily accepted or regulated into practice, organizations are making an effort to modify and integrate strategic elements of a connected management system into their daily risk management practices. In high-risk industries such as mining, that effort takes on added importance. The mining industry has long recognized the importance of a more integrated approach to recognizing and responding to site-specific risks, encouraging the adoption of a risk-based management framework. Recently, the U.S. National Mining Association led the development of an industry-specific HSMS built on the strategic frameworks of ANSI: Z10, OHSAS 18001, The American Chemistry Council's Responsible Care, and ILO-OSH 2001. All of these standards provide strategic guidance and focus on how to incorporate a plan-do-check-act cycle into the identification, management and evaluation of worksite risks. This paper details an exploratory study into whether practices associated with executing a risk-based management framework are visible through the actions of an organization's site-level management of health and safety risks. The results of this study show ways that site-level leaders manage day-to-day risk at their operations that can be characterized according to practices associated with a risk-based management framework. Having tangible operational examples of day-to-day risk management can serve as a starting point for evaluating field-level risk assessment efforts and their alignment to overall company efforts at effective risk mitigation through a HSMS or other processes.

Rideshare programs: a historical perspective

NASA Astrophysics Data System (ADS)

Horais, Brian J.

2000-11-01

In recent years there has been a significant increase in demand for testing, qualification and evaluation of satellite components in space. This will continue to be true with the dramatic growth in remote sensing and communication satellites and constellations. Finding ways to space qualify components and sensors without paying for expensive, dedicated space experiments has prompted a number of aerospace companies (large and small) and government organizations to increase their emphasis on providing low-cost access to space by means of secondary rides on primary payloads and launch vehicle structures. Proactive rideshare brokering is a process that supports space testing by actively providing the information, processes and equipment necessary to support successful space testing. As U.S. space programs have grown in scope and cost, the capacity to accetp risk as part of the development process has diminished - resulting in reduced levels of innovation and erosion of our space industry domination. In contrast, the international space community has instituted a number of innovative processes that support low cost entry to space for small programs. This has stimulated new space systems industries in many countries around the world. This growth is closely coupled with the dynamic growth in the International space launch industry. Proactive rideshare brokering takes a new approach to secondary payload integration. Many commercial and government payload integration services have taken the approach "If you build it they will come." This is not sufficiently aggressive to attract the new technologists who know very little about space testing. Proactive brokering must take a "You must go out and actively seek high-payoff technology payloads" approach to have a true impact on the implementation of new space system technologies. It should also include the application of proven practices from the international payload integration community. The paper draws conclusions by comparing what has been done historically and currently in the international space payload integration community versus what the current practices are in the U.S.. Observations and recommendations are made that reflect a reduced timeline approach and that acknowledge the close coupling between the technology base, the space systems industry, infrastructure and educational processes.

Knowledge management in the engineering design environment

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.

2006-01-01

The Aerospace and Defense industry is experiencing an increasing loss of knowledge through workforce reductions associated with business consolidation and retirement of senior personnel. Significant effort is being placed on process definition as part of ISO certification and, more recently, CMMI certification. The process knowledge in these efforts represents the simplest of engineering knowledge and many organizations are trying to get senior engineers to write more significant guidelines, best practices and design manuals. A new generation of design software, known as Product Lifecycle Management systems, has many mechanisms for capturing and deploying a wider variety of engineering knowledge than simple process definitions. These hold the promise of significant improvements through reuse of prior designs, codification of practices in workflows, and placement of detailed how-tos at the point of application.

The effectiveness of risk management: an analysis of project risk planning across industries and countries.

PubMed

Zwikael, Ofer; Ahn, Mark

2011-01-01

This article examines the effectiveness of current risk management practices to reduce project risk using a multinational, multi-industry study across different scenarios and cultures. A survey was administered to 701 project managers, and their supervisors, in seven industries and three diverse countries (New Zealand, Israel, and Japan), in multiple languages during the 2002-2007 period. Results of this study show that project context--industry and country where a project is executed--significantly impacts perceived levels of project risk, and the intensity of risk management processes. Our findings also suggest that risk management moderates the relationship between risk level and project success. Specifically, we found that even moderate levels of risk management planning are sufficient to reduce the negative effect risk levels have on project success. © 2010 Society for Risk Analysis.

Chemometric characterization of alembic and industrial sugar cane spirits from cape verde and ceará, Brazil.

PubMed

Pereira, Regina F R; Vidal, Carla B; de Lima, Ari C A; Melo, Diego Q; Dantas, Allan N S; Lopes, Gisele S; do Nascimento, Ronaldo F; Gomes, Clerton L; da Silva, Maria Nataniela

2012-01-01

Sugar cane spirits are some of the most popular alcoholic beverages consumed in Cape Verde. The sugar cane spirit industry in Cape Verde is based mainly on archaic practices that operate without supervision and without efficient control of the production process. The objective of this work was to evaluate samples of industrial and alembic sugar cane spirits from Cape Verde and Ceará, Brazil using principal component analysis. Thirty-two samples of spirits were analyzed, twenty from regions of the islands of Cape Verde and twelve from Ceará, Brazil. Of the samples obtained from Ceará, Brazil seven are alembic and five are industrial spirits. The components analyzed in these studies included the following: volatile organic compounds (n-propanol, isobutanol, isoamylic, higher alcohols, alcoholic grade, acetaldehyde, acetic acid, acetate); copper; and sulfates.

Chemometric Characterization of Alembic and Industrial Sugar Cane Spirits from Cape Verde and Ceará, Brazil

PubMed Central

Pereira, Regina F. R.; Vidal, Carla B.; de Lima, Ari C. A.; Melo, Diego Q.; Dantas, Allan N. S.; Lopes, Gisele S.; do Nascimento, Ronaldo F.; Gomes, Clerton L.; da Silva, Maria Nataniela

2012-01-01

Sugar cane spirits are some of the most popular alcoholic beverages consumed in Cape Verde. The sugar cane spirit industry in Cape Verde is based mainly on archaic practices that operate without supervision and without efficient control of the production process. The objective of this work was to evaluate samples of industrial and alembic sugar cane spirits from Cape Verde and Ceará, Brazil using principal component analysis. Thirty-two samples of spirits were analyzed, twenty from regions of the islands of Cape Verde and twelve from Ceará, Brazil. Of the samples obtained from Ceará, Brazil seven are alembic and five are industrial spirits. The components analyzed in these studies included the following: volatile organic compounds (n-propanol, isobutanol, isoamylic, higher alcohols, alcoholic grade, acetaldehyde, acetic acid, acetate); copper; and sulfates. PMID:23227051

Challenges and Requirements for the Application of Industry 4.0: A Special Insight with the Usage of Cyber-Physical System

NASA Astrophysics Data System (ADS)

Mueller, Egon; Chen, Xiao-Li; Riedel, Ralph

2017-09-01

Considered as a top priority of industrial development, Industry 4.0 (or Industrie 4.0 as the German version) has being highlighted as the pursuit of both academy and practice in companies. In this paper, based on the review of state of art and also the state of practice in different countries, shortcomings have been revealed as the lacking of applicable framework for the implementation of Industrie 4.0. Therefore, in order to shed some light on the knowledge of the details, a reference architecture is developed, where four perspectives namely manufacturing process, devices, software and engineering have been highlighted. Moreover, with a view on the importance of Cyber-Physical systems, the structure of Cyber-Physical System are established for the in-depth analysis. Further cases with the usage of Cyber-Physical System are also arranged, which attempts to provide some implications to match the theoretical findings together with the experience of companies. In general, results of this paper could be useful for the extending on the theoretical understanding of Industrie 4.0. Additionally, applied framework and prototypes based on the usage of Cyber-Physical Systems are also potential to help companies to design the layout of sensor nets, to achieve coordination and controlling of smart machines, to realize synchronous production with systematic structure, and to extend the usage of information and communication technologies to the maintenance scheduling.

Desktop microsimulation: a tool to improve efficiency in the medical office practice.

PubMed

Montgomery, James B; Linville, Beth A; Slonim, Anthony D

2013-01-01

Because the economic crisis in the United States continues to have an impact on healthcare organizations, industry leaders must optimize their decision making. Discrete-event computer simulation is a quality tool with a demonstrated track record of improving the precision of analysis for process redesign. However, the use of simulation to consolidate practices and design efficiencies into an unfinished medical office building was a unique task. A discrete-event computer simulation package was used to model the operations and forecast future results for four orthopedic surgery practices. The scenarios were created to allow an evaluation of the impact of process change on the output variables of exam room utilization, patient queue size, and staff utilization. The model helped with decisions regarding space allocation and efficient exam room use by demonstrating the impact of process changes in patient queues at check-in/out, x-ray, and cast room locations when compared to the status quo model. The analysis impacted decisions on facility layout, patient flow, and staff functions in this newly consolidated practice. Simulation was found to be a useful tool for process redesign and decision making even prior to building occupancy. © 2011 National Association for Healthcare Quality.

Need to Knowledge (NtK) Model: an evidence-based framework for generating technological innovations with socio-economic impacts.

PubMed

Flagg, Jennifer L; Lane, Joseph P; Lockett, Michelle M

2013-02-15

Traditional government policies suggest that upstream investment in scientific research is necessary and sufficient to generate technological innovations. The expected downstream beneficial socio-economic impacts are presumed to occur through non-government market mechanisms. However, there is little quantitative evidence for such a direct and formulaic relationship between public investment at the input end and marketplace benefits at the impact end. Instead, the literature demonstrates that the technological innovation process involves a complex interaction between multiple sectors, methods, and stakeholders. The authors theorize that accomplishing the full process of technological innovation in a deliberate and systematic manner requires an operational-level model encompassing three underlying methods, each designed to generate knowledge outputs in different states: scientific research generates conceptual discoveries; engineering development generates prototype inventions; and industrial production generates commercial innovations. Given the critical roles of engineering and business, the entire innovation process should continuously consider the practical requirements and constraints of the commercial marketplace.The Need to Knowledge (NtK) Model encompasses the activities required to successfully generate innovations, along with associated strategies for effectively communicating knowledge outputs in all three states to the various stakeholders involved. It is intentionally grounded in evidence drawn from academic analysis to facilitate objective and quantitative scrutiny, and industry best practices to enable practical application. The Need to Knowledge (NtK) Model offers a practical, market-oriented approach that avoids the gaps, constraints and inefficiencies inherent in undirected activities and disconnected sectors. The NtK Model is a means to realizing increased returns on public investments in those science and technology programs expressly intended to generate beneficial socio-economic impacts.

Need to Knowledge (NtK) Model: an evidence-based framework for generating technological innovations with socio-economic impacts

PubMed Central

2013-01-01

Background Traditional government policies suggest that upstream investment in scientific research is necessary and sufficient to generate technological innovations. The expected downstream beneficial socio-economic impacts are presumed to occur through non-government market mechanisms. However, there is little quantitative evidence for such a direct and formulaic relationship between public investment at the input end and marketplace benefits at the impact end. Instead, the literature demonstrates that the technological innovation process involves a complex interaction between multiple sectors, methods, and stakeholders. Discussion The authors theorize that accomplishing the full process of technological innovation in a deliberate and systematic manner requires an operational-level model encompassing three underlying methods, each designed to generate knowledge outputs in different states: scientific research generates conceptual discoveries; engineering development generates prototype inventions; and industrial production generates commercial innovations. Given the critical roles of engineering and business, the entire innovation process should continuously consider the practical requirements and constraints of the commercial marketplace. The Need to Knowledge (NtK) Model encompasses the activities required to successfully generate innovations, along with associated strategies for effectively communicating knowledge outputs in all three states to the various stakeholders involved. It is intentionally grounded in evidence drawn from academic analysis to facilitate objective and quantitative scrutiny, and industry best practices to enable practical application. Summary The Need to Knowledge (NtK) Model offers a practical, market-oriented approach that avoids the gaps, constraints and inefficiencies inherent in undirected activities and disconnected sectors. The NtK Model is a means to realizing increased returns on public investments in those science and technology programs expressly intended to generate beneficial socio-economic impacts. PMID:23414369

A Study on How Industrial Pharmacists Rank Competences for Pharmacy Practice: A Case for Industrial Pharmacy Specialization

PubMed Central

Atkinson, Jeffrey; De Paepe, Kristien; Sánchez Pozo, Antonio; Rekkas, Dimitrios; Volmer, Daisy; Hirvonen, Jouni; Bozic, Borut; Skowron, Agnieska; Mircioiu, Constantin; Marcincal, Annie; Koster, Andries; Wilson, Keith; van Schravendijk, Chris

2016-01-01

This paper looks at the way in which industrial pharmacists rank the fundamental competences for pharmacy practice. European industrial pharmacists (n = 135) ranked 68 competences for practice, arranged into 13 clusters of two types (personal and patient care). Results show that, compared to community pharmacists (n = 258), industrial pharmacists rank competences centering on research, development and production of drugs higher, and those centering on patient care lower. Competences centering on values, communication skills, etc. were ranked similarly by the two groups of pharmacists. These results are discussed in the light of the existence or not of an “industrial pharmacy” specialization. PMID:28970386

Discovery of practical production processes for arylsulfur pentafluorides and their higher homologues, bis- and tris(sulfur pentafluorides): Beginning of a new era of “super-trifluoromethyl” arene chemistry and its industry

PubMed Central

Garrick, Lloyd M; Saito, Norimichi

2012-01-01

Summary Various arylsulfur pentafluorides, ArSF5, have long been desired in both academic and industrial areas, and ArSF5 compounds have attracted considerable interest in many areas such as medicines, agrochemicals, and other new materials, since the highly stable SF5 group is considered a “super-trifluoromethyl group” due to its significantly higher electronegativity and lipophilicity. This article describes the first practical method for the production of various arylsulfur pentafluorides and their higher homologues, bis- and tris(sulfur pentafluorides), from the corresponding diaryl disulfides or aryl thiols. The method consists of two steps: (Step 1) treatment of a diaryl disulfide or an aryl thiol with chlorine in the presence of an alkali metal fluoride, and (step 2) treatment of the resulting arylsulfur chlorotetrafluoride with a fluoride source, such as ZnF2, HF, and Sb(III/V) fluorides. The intermediate arylsulfur chlorotetrafluorides were isolated by distillation or recrystallization and characterized. The aspects of these new reactions are revealed and reaction mechanisms are discussed. As the method offers considerable improvement over previous methods in cost, yield, practicality, applicability, and large-scale production, the new processes described here can be employed as the first practical methods for the economical production of various arylsulfur pentafluorides and their higher homologues, which could then open up a new era of “super-trifluoromethyl” arene chemistry and its applications in many areas. PMID:22509218

Characterization of the animal by-product meal industry in Costa Rica: Manufacturing practices through the production chain and food safety

PubMed Central

Leiva, A; Granados-Chinchilla, F; Redondo-Solano, M; Arrieta-González, M; Pineda-Salazar, E; Molina, A

2018-01-01

ABSTRACT Animal by-product rendering establishments are still relevant industries worldwide. Animal by-product meal safety is paramount to protect feed, animals, and the rest of the food chain from unwanted contamination. As microbiological contamination may arise from inadequate processing of slaughterhouse waste and deficiencies in good manufacturing practices within the rendering facilities, we conducted an overall establishment's inspection, including the product in several parts of the process. An evaluation of the Good Manufacturing Practices (GMP) was carried out, which included the location and access (i.e., admission) to the facilities, integrated pest management programs, physical condition of the facilities (e.g., infrastructure), equipments, vehicles and transportation, as well as critical control points (i.e., particle size and temperature set at 50 mm, 133°C at atmospheric pressure for 20 min, respectively) recommended by the OIE and the European Commission. The most sensitive points according to the evaluation are physical structure of the facilities (avg 42.2%), access to the facilities (avg 48.6%), and cleaning procedures (avg 51.4%). Also, indicator microorganisms (Salmonella spp., Clostridium spp., total coliforms, E. coli, E. coli O157:H7) were used to evaluate the safety in different parts of the animal meal production process. There was a prevalence of Salmonella spp. of 12.9, 14.3, and 33.3% in Meat and Bone Meal (MBM), poultry by-products, and fish meal, respectively. However, there were no significant differences (P = 0.73) in the prevalence between the different animal meals, according to the data collected. It was also observed that renderings associated with the poultry industry (i.e., 92.0%) obtained the best ratings overall, which reflects a satisfactory development of this sector and the integration of its production system as a whole. PMID:29562297

Effect of thermal processing and canning on cadmium and lead levels in California market squid: the role of metallothioneins.

PubMed

Galitsopoulou, A; Georgantelis, D; Kontominas, M G

2013-01-01

The effects of two common seafood preparation practices (roasting and industrial canning) on the heavy metal content--cadmium (Cd) and lead (Pb)--of various tissues of California market squid were studied. Emphasis was placed on the role of metallothioneins (MT) in Cd and Pb behaviour during processing. Cd and Pb analysis was conducted by a Zeeman GTA-AAS atomic absorption spectrometry system; MT analysis was performed by a mercury saturation assay. Results showed that Cd levels in the mantle and whole squid were considerably affected by both processing practices, reaching a 240% increase in mantle and a 40% increase in whole squid. Interestingly, Cd behaviour was associated with MT changes during squid processing. On the other hand, Pb content was not affected from either processing or associated with MT content in the raw or processed squid. Therefore, processing operations may affect Cd and Pb content differently due to the specific metal bioaccumulation and chemical features of each heavy metal type.

Application of target costing in machining

NASA Astrophysics Data System (ADS)

Gopalakrishnan, Bhaskaran; Kokatnur, Ameet; Gupta, Deepak P.

2004-11-01

In today's intensely competitive and highly volatile business environment, consistent development of low cost and high quality products meeting the functionality requirements is a key to a company's survival. Companies continuously strive to reduce the costs while still producing quality products to stay ahead in the competition. Many companies have turned to target costing to achieve this objective. Target costing is a structured approach to determine the cost at which a proposed product, meeting the quality and functionality requirements, must be produced in order to generate the desired profits. It subtracts the desired profit margin from the company's selling price to establish the manufacturing cost of the product. Extensive literature review revealed that companies in automotive, electronic and process industries have reaped the benefits of target costing. However target costing approach has not been applied in the machining industry, but other techniques based on Geometric Programming, Goal Programming, and Lagrange Multiplier have been proposed for application in this industry. These models follow a forward approach, by first selecting a set of machining parameters, and then determining the machining cost. Hence in this study we have developed an algorithm to apply the concepts of target costing, which is a backward approach that selects the machining parameters based on the required machining costs, and is therefore more suitable for practical applications in process improvement and cost reduction. A target costing model was developed for turning operation and was successfully validated using practical data.

Constructing Relationships between Science and Practice in the Written Science Communication of the Washington State Wine Industry

ERIC Educational Resources Information Center

Szymanski, Erika Amethyst

2016-01-01

Even as deficit model science communication falls out of favor, few studies question how written science communication constructs relationships between science and industry. Here, I investigate how textual microprocesses relate scientific research to industry practice in the Washington State wine industry, helping (or hindering) winemakers and…

Political Projects and Micro-Practices of Globalising Education: Building an International Education Industry in New Zealand

ERIC Educational Resources Information Center

Lewis, Nicolas

2011-01-01

This paper examines the framing of globalising education as an industry in New Zealand. It traces the development of industry institutions to promote and regulate cross-border educational relations and practices. The paper argues that the making of a national "international education industry" has framed entrepreneurial education…

Toxicity evaluation of process water from hydrothermal carbonization of sugarcane industry by-products.

PubMed

Fregolente, Laís Gomes; Miguel, Thaiz Batista Azevedo Rangel; de Castro Miguel, Emilio; de Almeida Melo, Camila; Moreira, Altair Benedito; Ferreira, Odair Pastor; Bisinoti, Márcia Cristina

2018-03-29

Hydrothermal carbonization (HTC) is a thermochemical process carried out in an aqueous medium. It is capable of converting biomass into a solid, carbon-rich material (hydrochar), and producing a liquid phase (process water) which contains the unreactive feedstock and/or chemical intermediates from the carbonization reaction. The aim of this study was to evaluate the characteristics of process water generated by HTC from vinasse and sugarcane bagasse produced by sugarcane industry and to evaluate its toxicity to both marine (using Artemia salina as a model organism) and the terrestrial environment (through seed germination studies of maize, lettuce, and tomato). The experiments showed that concentrated process water completely inhibited germination of maize, lettuce, and tomato seeds. On the other hand, diluted process water was able to stimulate seedlings of maize and tomato and enhance root and shoot growth. For Artemia, the LC 50 indicated that the process water is practically non-toxic; however, morphological changes, especially damages to the digestive tube and antennas of Artemia, were observed for the concentration of 1000 mg C L -1 .

Theoretical and practical investigation into sustainable metal joining process for the automotive industry

NASA Astrophysics Data System (ADS)

Al-Jader, M. A.; Cullen, J. D.; Shaw, Andy; Al-Shamma'a, A. I.

2011-08-01

Currently there are about 4300 weld points on the average steel vehicle. Errors and problems due to tip damage and wear can cause great losses due to production line downtime. Current industrial monitoring systems check the quality of the nugget after processing 15 cars average once every two weeks. The nuggets are examined off line using a destructive process, which takes approximately 10 days to complete causing a long delay in the production process. In this paper a simulation results using software package, SORPAS, will be presented to determined the sustainability factors in spot welding process including Voltage, Current, Force, Water cooling rates, Material thicknesses and usage. The experimental results of various spot welding processes will be investigated and reported. The correlation of experimental results shows that SORPAS simulations can be used as an off line measurement to reduce factory energy usage. This paper also provides an overview of electrode current selection and its variance over the lifetime of the electrode tip, and describes the proposed analysis system for the selection of welding parameters for the spot welding process, as the electrode tip wears.

Evaluation of particulate matter emissions from manganese alloy production using life-cycle assessment.

PubMed

Davourie, Julia; Westfall, Luke; Ali, Mohammed; McGough, Doreen

2017-01-01

Life-cycle assessments (LCAs) provide a wealth of industry data to assist in evaluating the environmental impacts of industrial processes and product supply chains. In this investigation, data from a recent LCA covering global manganese alloy production was used to evaluate sources of particulate matter (PM) emissions associated with the manganese alloy supply chain. The analysis is aimed at providing an empirical, industry-averaged breakdown of the contribution that processes and emissions controls have on total emissions, manganese releases and occupational exposure. The assessment shows that 66% of PM emissions associated with manganese production occur beyond manganese facilities. Direct or on-site emissions represent 34% of total PM and occur predominantly as disperse sources during mineral extraction and hauling, and as primary furnace emissions. The largest contribution of manganese-bearing PM at ground-level is associated with fugitive emissions from metal and slag tapping, casting, crushing and screening. The evaluation provides a high-level ranking of emissions by process area, to assist in identifying priority areas for industry-wide initiatives to reduce emissions and occupational exposure of manganese. The range of PM emission levels in industry indicate that further enhancements in PM emissions can be achieved by sharing of best practices in emissions controls, limiting furnace conditions which lead to by-passing of emissions controls and application of secondary emission controls to capture fugitive emissions during tapping and casting. The LCA approach to evaluating PM emissions underscores the important role that process optimization and resource efficiency have on reducing PM emissions throughout the manganese supply chain. Copyright © 2016. Published by Elsevier B.V.

Unfulfilled translation opportunities in industry sponsored clinical trials.

PubMed

Smed, Marie; Getz, Kenneth A

2013-05-01

Knowledge generated by site representatives through their participation in clinical trials is valuable for testing new products in use and obtaining final market approval. The leverage of this important knowledge is however challenged as the former direct relationships between in-house staff in the industry and site representatives are changing. The process of clinical trials has increased in complexity over the years, resulting in additional management layers. Besides an increase in internal management layers, sponsors often also outsource various tasks related to clinical trials to a CRO (Contract Research Organization) and thereby adding another link in the relationships between site and sponsor. These changes are intended to optimize the time-consuming and costly trial phases; however, there is a need to study whether valuable knowledge and experience is compromised in the process. Limited research exists on the full range of clinical practice insights obtained by investigators during and after clinical trials and how well these insights are transferred to study sponsors. This study explores the important knowledge-transfer processes between sites and sponsors and to what extent sites' knowledge gained in clinical trials is utilized by the industry. Responses from 451 global investigative site representatives are included in the study. The analysis of the extensive dataset reveals that the current processes of collaboration between sites and the industry restrict the leverage of valuable knowledge gained by physicians in the process of clinical trials. These restrictions to knowledge-transfer between site and sponsor are further challenged if CRO partners are integrated in the trial process. Copyright © 2013 Elsevier Inc. All rights reserved.

Incinerator technology overview

NASA Astrophysics Data System (ADS)

Santoleri, Joseph J.

1991-04-01

In the 1960's, much effort was expended on cleaning up the air and water. Air Quality and Water Quality Acts were written and inpleinented in many states and coninunities. New products such as unleaded gasoline and water base paints were developed to aid in minimizing pollution. Conversion from oil fired combustion systems to natural gas fired for comfort and industrial heating was the normal practice. In 1970, the Clean Air Act was passed. There was concern on how to safely dispose of hazardous wastes. Indiscriminate dumping of chemical process wastes had been the practice since the birth of the chemical industry in the USA. Land dumping, inadequate landfills, and river-ocean dumping were the most economical ways to dispose of chemical wastes. Processes that would have reduced or eliminated wastes were disregarded as being too costly. Many of the major chemical companies who regarded a safe environment as their responsibility installed waste treatment and disposal facilities on their plant sites. Many of these plants elected to use incinerators as the treatment process. This was not always the most economical method, but in many cases it was the only method of disposal that provided a safe and sure method of maximum destruction. Environmental concern over contamination from uncontrolled land disposal sites, and the emergence of tougher regulations for land disposal provide incentives for industry to employ a wide variety of traditional and advanced technologies for managing hazardous wastes. Incineration systems utilizing proper design, operation, and maintenance provides the safest and in the long run, the most economical avenue to the maximum level of destruction of organic hazardous wastes.

Highly active and efficient catalysts for alkoxycarbonylation of alkenes

PubMed Central

Dong, Kaiwu; Fang, Xianjie; Gülak, Samet; Franke, Robert; Spannenberg, Anke; Neumann, Helfried; Jackstell, Ralf; Beller, Matthias

2017-01-01

Carbonylation reactions of alkenes constitute the most important industrial processes in homogeneous catalysis. Despite the tremendous progress in this transformation, the development of advanced catalyst systems to improve their activity and widen the range of feedstocks continues to be essential for new practical applications. Herein a palladium catalyst based on 1,2-bis((tert-butyl(pyridin-2-yl)phosphanyl)methyl)benzene L3 (pytbpx) is rationally designed and synthesized. Application of this system allows a general alkoxycarbonylation of sterically hindered and demanding olefins including all kinds of tetra-, tri- and 1,1-disubstituted alkenes as well as natural products and pharmaceuticals to the desired esters in excellent yield. Industrially relevant bulk ethylene is functionalized with high activity (TON: >1,425,000; TOF: 44,000 h−1 for initial 18 h) and selectivity (>99%). Given its generality and efficiency, we expect this catalytic system to immediately impact both the chemical industry and research laboratories by providing a practical synthetic tool for the transformation of nearly any alkene into a versatile ester product. PMID:28120947

Real-Time Pattern Recognition - An Industrial Example

NASA Astrophysics Data System (ADS)

Fitton, Gary M.

1981-11-01

Rapid advancements in cost effective sensors and micro computers are now making practical the on-line implementation of pattern recognition based systems for a variety of industrial applications requiring high processing speeds. One major application area for real time pattern recognition is in the sorting of packaged/cartoned goods at high speed for automated warehousing and return goods cataloging. While there are many OCR and bar code readers available to perform these functions, it is often impractical to use such codes (package too small, adverse esthetics, poor print quality) and an approach which recognizes an item by its graphic content alone is desirable. This paper describes a specific application within the tobacco industry, that of sorting returned cigarette goods by brand and size.

Collaboration between industry and academia--prospects for male fertility control.

PubMed

Stock, G; Habenicht, U F

1999-12-01

Drug development within the pharmaceutical industry is probably the field with the highest level of regulations. Due to the complexity of the different components of drug development and drug surveillance the need for a sophisticated organization and infrastructure is obvious. In addition, there is a necessity for sufficient resources and long-term commitment as well as logistic and long-term knowledge management. In order to secure high professional standards at all levels of this highly complex value creating chain, the number of cooperative arrangements in the pharmaceutical industry are increasing. The identification of new targets in the drug finding process calls in particular for outside partners. At the same time the preparedness of non-industrial researchers to cooperate with industry has also increased significantly. The area of fertility control, especially male fertility control, provides an excellent example for this kind of cooperation between industrial and non-industrial partners. Here a cooperative network is described which probably meets practically all relevant criteria for both the non-industrial but also the industrial partner. Some principles for the management of such a cooperative network are discussed. We believe that this kind of network can serve as a model for similar networks in other fields.

'Maximising shareholder value': a detailed insight into the corporate political activity of the Australian food industry.

PubMed

Mialon, Melissa; Swinburn, Boyd; Allender, Steven; Sacks, Gary

2017-04-01

To gain deeper insight into the corporate political activity (CPA) of the Australian food industry from a public health perspective. Fifteen interviews with a purposive sample of current and former policy makers, public health advocates and academics who have closely interacted with food industry representatives or observed food industry behaviours. All participants reported having directly experienced the CPA of the food industry during their careers, with the 'information and messaging' and 'constituency building' strategies most prominent. Participants expressed concern that food industry CPA strategies resulted in weakened policy responses to addressing diet-related disease. This study provides direct evidence of food industry practices that have the potential to shape public health-related policies and programs in Australia in ways that favour business interests at the expense of population health. Implications for public health: This evidence can inform policy makers and public health advocates and be used to adopt measures to ensure that public interests are put at the forefront as part of the policy development and implementation process. © 2017 The Authors.

Restaurant food cooling practices.

PubMed

Brown, Laura Green; Ripley, Danny; Blade, Henry; Reimann, Dave; Everstine, Karen; Nicholas, Dave; Egan, Jessica; Koktavy, Nicole; Quilliam, Daniela N

2012-12-01

Improper food cooling practices are a significant cause of foodborne illness, yet little is known about restaurant food cooling practices. This study was conducted to examine food cooling practices in restaurants. Specifically, the study assesses the frequency with which restaurants meet U.S. Food and Drug Administration (FDA) recommendations aimed at reducing pathogen proliferation during food cooling. Members of the Centers for Disease Control and Prevention's Environmental Health Specialists Network collected data on food cooling practices in 420 restaurants. The data collected indicate that many restaurants are not meeting FDA recommendations concerning cooling. Although most restaurant kitchen managers report that they have formal cooling processes (86%) and provide training to food workers on proper cooling (91%), many managers said that they do not have tested and verified cooling processes (39%), do not monitor time or temperature during cooling processes (41%), or do not calibrate thermometers used for monitoring temperatures (15%). Indeed, 86% of managers reported cooling processes that did not incorporate all FDA-recommended components. Additionally, restaurants do not always follow recommendations concerning specific cooling methods, such as refrigerating cooling food at shallow depths, ventilating cooling food, providing open-air space around the tops and sides of cooling food containers, and refraining from stacking cooling food containers on top of each other. Data from this study could be used by food safety programs and the restaurant industry to target training and intervention efforts concerning cooling practices. These efforts should focus on the most frequent poor cooling practices, as identified by this study.

NASA Technology Applications Team: Commercial applications of aerospace technology

NASA Technical Reports Server (NTRS)

1994-01-01

The Research Triangle Institute (RTI) Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies, that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. The RTI Team has been successful in the development of NASA/industry partnerships and commercialization of NASA technologies. RTI ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed and implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs. (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology. And (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

Rethinking health sector procurement as developmental linkages in East Africa.

PubMed

Mackintosh, Maureen; Tibandebage, Paula; Karimi Njeru, Mercy; Kariuki Kungu, Joan; Israel, Caroline; Mujinja, Phares G M

2018-03-01

Health care forms a large economic sector in all countries, and procurement of medicines and other essential commodities necessarily creates economic linkages between a country's health sector and local and international industrial development. These procurement processes may be positive or negative in their effects on populations' access to appropriate treatment and on local industrial development, yet procurement in low and middle income countries (LMICs) remains under-studied: generally analysed, when addressed at all, as a public sector technical and organisational challenge rather than a social and economic element of health system governance shaping its links to the wider economy. This article uses fieldwork in Tanzania and Kenya in 2012-15 to analyse procurement of essential medicines and supplies as a governance process for the health system and its industrial links, drawing on aspects of global value chain theory. We describe procurement work processes as experienced by front line staff in public, faith-based and private sectors, linking these experiences to wholesale funding sources and purchasing practices, and examining their implications for medicines access and for local industrial development within these East African countries. We show that in a context of poor access to reliable medicines, extensive reliance on private medicines purchase, and increasing globalisation of procurement systems, domestic linkages between health and industrial sectors have been weakened, especially in Tanzania. We argue in consequence for a more developmental perspective on health sector procurement design, including closer policy attention to strengthening vertical and horizontal relational working within local health-industry value chains, in the interests of both wider access to treatment and improved industrial development in Africa. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Deconstructing the Drug Development Process: The New Face of Innovation

PubMed Central

Kaitin, KI

2010-01-01

Forged in the early 1960s, the paradigm for pharmaceutical innovation has remained virtually unchanged for nearly 50 years. During a period when most other research-based industries have made frequent and often sweeping modifications to their R&D processes, the pharmaceutical sector continues to utilize a drug development process that is slow, inefficient, risky, and expensive. Few who work in or follow the activities of the pharmaceutical industry question whether change is coming. They know that the pharmaceutical sector, as currently structured, is unable to deliver enough new products to market to generate revenues sufficient to sustain its own growth. Nearly all major drug developers are critically examining current R&D practices and, in some cases, considering a radical overhaul of their R&D models. But key questions remain. What will the landscape for pharmaceutical innovation look like in the future? And, who will develop tomorrow’s medicines? PMID:20130565

Flexible manufacturing for photonics device assembly

NASA Technical Reports Server (NTRS)

Lu, Shin-Yee; Pocha, Michael D.; Strand, Oliver T.; Young, K. David

1994-01-01

The assembly of photonics devices such as laser diodes, optical modulators, and opto-electronics multi-chip modules (OEMCM), usually requires the placement of micron size devices such as laser diodes, and sub-micron precision attachment between optical fibers and diodes or waveguide modulators (usually referred to as pigtailing). This is a very labor intensive process. Studies done by the opto-electronics (OE) industry have shown that 95 percent of the cost of a pigtailed photonic device is due to the use of manual alignment and bonding techniques, which is the current practice in industry. At Lawrence Livermore National Laboratory, we are working to reduce the cost of packaging OE devices through the use of automation. Our efforts are concentrated on several areas that are directly related to an automated process. This paper will focus on our progress in two of those areas, in particular, an automated fiber pigtailing machine and silicon micro-technology compatible with an automated process.

Opening up the Agile Innovation Process

NASA Astrophysics Data System (ADS)

Conboy, Kieran; Donnellan, Brian; Morgan, Lorraine; Wang, Xiaofeng

The objective of this panel is to discuss how firms can operate both an open and agile innovation process. In an era of unprecedented changes, companies need to be open and agile in order to adapt rapidly and maximize their innovation processes. Proponents of agile methods claim that one of the main distinctions between agile methods and their traditional bureaucratic counterparts is their drive toward creativity and innovation. However, agile methods are rarely adopted in their textbook, "vanilla" format, and are usually adopted in part or are tailored or modified to suit the organization. While we are aware that this happens, there is still limited understanding of what is actually happening in practice. Using innovation adoption theory, this panel will discuss the issues and challenges surrounding the successful adoption of agile practices. In addition, this panel will report on the obstacles and benefits reported by over 20 industrial partners engaged in a pan-European research project into agile practices between 2006 and 2009.

An enhanced reliability-oriented workforce planning model for process industry using combined fuzzy goal programming and differential evolution approach

NASA Astrophysics Data System (ADS)

Ighravwe, D. E.; Oke, S. A.; Adebiyi, K. A.

2018-03-01

This paper draws on the "human reliability" concept as a structure for gaining insight into the maintenance workforce assessment in a process industry. Human reliability hinges on developing the reliability of humans to a threshold that guides the maintenance workforce to execute accurate decisions within the limits of resources and time allocations. This concept offers a worthwhile point of deviation to encompass three elegant adjustments to literature model in terms of maintenance time, workforce performance and return-on-workforce investments. These fully explain the results of our influence. The presented structure breaks new grounds in maintenance workforce theory and practice from a number of perspectives. First, we have successfully implemented fuzzy goal programming (FGP) and differential evolution (DE) techniques for the solution of optimisation problem in maintenance of a process plant for the first time. The results obtained in this work showed better quality of solution from the DE algorithm compared with those of genetic algorithm and particle swarm optimisation algorithm, thus expressing superiority of the proposed procedure over them. Second, the analytical discourse, which was framed on stochastic theory, focusing on specific application to a process plant in Nigeria is a novelty. The work provides more insights into maintenance workforce planning during overhaul rework and overtime maintenance activities in manufacturing systems and demonstrated capacity in generating substantially helpful information for practice.

A qualitative phenomenological study: Enhanced, risk-based FAA oversight on part 145 maintenance practices

NASA Astrophysics Data System (ADS)

Sheehan, Bryan G.

The purpose of this qualitative phenomenological study was to examine the phenomenon of enhanced, risk-based Federal Aviation Administration (FAA) oversight of Part 145 repair stations that performed aircraft maintenance for Part 121 air carriers between 2007 and 2014 in Oklahoma. Specifically, this research was utilized to explore what operational changes have occurred in the domestic Part 145 repair station industry such as variations in management or hiring practices, training, recordkeeping and technical data, inventory and aircraft parts supply-chain logistics, equipment, and facilities. After interviewing 12 managers from Part 145 repair stations in Oklahoma, six major theme codes emerged from the data: quality of oversight before 2007, quality of oversight after 2007, advantages of oversight, disadvantages of oversight, status quo of oversight, and process improvement . Of those six major theme codes, 17 subthemes appeared from the data that were used to explain the phenomenon of enhanced oversight in the Part 145 repair station industry. Forty-two percent of the participants indicated a weak FAA oversight system that has hindered the continuous process improvement program in their repair stations. Some of them were financially burdened after hiring additional full-time quality assurance inspectors to specifically manage enhanced FAA oversight. Notwithstanding, the participants of the study indicated that the FAA must apply its surveillance on a more standardized and consistent basis. They want to see this standardization in how FAA inspectors interpret regulations and practice the same quality of oversight for all repair stations, particularly those that are repeat violators and fail to comply with federal aviation regulations. They believed that when the FAA enforces standardization on a consistent basis, repair stations can become more efficient and safer in the performance of their scope of work for the U.S. commercial air transportation industry.

Design and implementation of adaptive PI control schemes for web tension control in roll-to-roll (R2R) manufacturing.

PubMed

Raul, Pramod R; Pagilla, Prabhakar R

2015-05-01

In this paper, two adaptive Proportional-Integral (PI) control schemes are designed and discussed for control of web tension in Roll-to-Roll (R2R) manufacturing systems. R2R systems are used to transport continuous materials (called webs) on rollers from the unwind roll to the rewind roll. Maintaining web tension at the desired value is critical to many R2R processes such as printing, coating, lamination, etc. Existing fixed gain PI tension control schemes currently used in industrial practice require extensive tuning and do not provide the desired performance for changing operating conditions and material properties. The first adaptive PI scheme utilizes the model reference approach where the controller gains are estimated based on matching of the actual closed-loop tension control systems with an appropriately chosen reference model. The second adaptive PI scheme utilizes the indirect adaptive control approach together with relay feedback technique to automatically initialize the adaptive PI gains. These adaptive tension control schemes can be implemented on any R2R manufacturing system. The key features of the two adaptive schemes is that their designs are simple for practicing engineers, easy to implement in real-time, and automate the tuning process. Extensive experiments are conducted on a large experimental R2R machine which mimics many features of an industrial R2R machine. These experiments include trials with two different polymer webs and a variety of operating conditions. Implementation guidelines are provided for both adaptive schemes. Experimental results comparing the two adaptive schemes and a fixed gain PI tension control scheme used in industrial practice are provided and discussed. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

High-autonomy control of space resource processing plants

NASA Technical Reports Server (NTRS)

Schooley, Larry C.; Zeigler, Bernard P.; Cellier, Francois E.; Wang, Fei-Yue

1993-01-01

A highly autonomous intelligent command/control architecture has been developed for planetary surface base industrial process plants and Space Station Freedom experimental facilities. The architecture makes use of a high-level task-oriented mode with supervisory control from one or several remote sites, and integrates advanced network communications concepts and state-of-the-art man/machine interfaces with the most advanced autonomous intelligent control. Attention is given to the full-dynamics model of a Martian oxygen-production plant, event-based/fuzzy-logic process control, and fault management practices.

Product manufacturing, quality, and reliability initiatives to maintain a competitive advantage and meet customer expectations in the semiconductor industry

NASA Astrophysics Data System (ADS)

Capps, Gregory

Semiconductor products are manufactured and consumed across the world. The semiconductor industry is constantly striving to manufacture products with greater performance, improved efficiency, less energy consumption, smaller feature sizes, thinner gate oxides, and faster speeds. Customers have pushed towards zero defects and require a more reliable, higher quality product than ever before. Manufacturers are required to improve yields, reduce operating costs, and increase revenue to maintain a competitive advantage. Opportunities exist for integrated circuit (IC) customers and manufacturers to work together and independently to reduce costs, eliminate waste, reduce defects, reduce warranty returns, and improve quality. This project focuses on electrical over-stress (EOS) and re-test okay (RTOK), two top failure return mechanisms, which both make great defect reduction opportunities in customer-manufacturer relationship. Proactive continuous improvement initiatives and methodologies are addressed with emphasis on product life cycle, manufacturing processes, test, statistical process control (SPC), industry best practices, customer education, and customer-manufacturer interaction.

NORM Management in the Oil & Gas Industry

NASA Astrophysics Data System (ADS)

Cowie, Michael; Mously, Khalid; Fageeha, Osama; Nassar, Rafat

2008-08-01

It has been established that Naturally Occurring Radioactive Materials (NORM) accumulates at various locations along the oil/gas production process. Components such as wellheads, separation vessels, pumps, and other processing equipment can become NORM contaminated, and NORM can accumulate in sludge and other waste media. Improper handling and disposal of NORM contaminated equipment and waste can create a potential radiation hazard to workers and the environment. Saudi Aramco Environmental Protection Department initiated a program to identify the extent, form and level of NORM contamination associated with the company operations. Once identified the challenge of managing operations which had a NORM hazard was addressed in a manner that gave due consideration to workers and environmental protection as well as operations' efficiency and productivity. The benefits of shared knowledge, practice and experience across the oil & gas industry are seen as key to the establishment of common guidance on NORM management. This paper outlines Saudi Aramco's experience in the development of a NORM management strategy and its goals of establishing common guidance throughout the oil and gas industry.

Quality assurance of herbal raw materials in supply chain: challenges and opportunities.

PubMed

Govindaraghavan, Suresh

2008-01-01

The herbal medicine industry is presently adopting modern scientific tools to substantiate the guarantee of efficacy that, in the past, rested only on anecdotal evidence derived from traditional knowledge systems. This is particularly true for the processes of identification of herbal raw materials adopting modern tools for phytochemical fingerprinting. The successful adaptation of available technologies and practices depends on an understanding of the phytochemical complexity and variability innate in biological material. It challenges the "mainstream medicinal mindset" that "tend(s) to reject …. therapies for which mechanisms of action do not fit within Newtonian, biochemical orientation" (Dumoff, 2003). The herbal medicinal industry is independently evolving its own rigid quality assurance and control systems using Good Manufacturing Practice (GMP) and Good Laboratory Practice (GLP) guidelines, but it faces unique difficulties. These include lack of Good Agricultural and Collection Practice (GACP), lack of transparency in the raw material supply chain so as to preclude the use of unsafe practices, problems in the authentication of herbal raw materials, and a general lack of understanding of the need to reduce phytochemical variability in these materials. This paper explores these difficulties and outlines strategies to overcome them, but these strategies will require coordinated international government regulations to be fully effective.

The impact of distributed computing on education

NASA Technical Reports Server (NTRS)

Utku, S.; Lestingi, J.; Salama, M.

1982-01-01

In this paper, developments in digital computer technology since the early Fifties are reviewed briefly, and the parallelism which exists between these developments and developments in analysis and design procedures of structural engineering is identified. The recent trends in digital computer technology are examined in order to establish the fact that distributed processing is now an accepted philosophy for further developments. The impact of this on the analysis and design practices of structural engineering is assessed by first examining these practices from a data processing standpoint to identify the key operations and data bases, and then fitting them to the characteristics of distributed processing. The merits and drawbacks of the present philosophy in educating structural engineers are discussed and projections are made for the industry-academia relations in the distributed processing environment of structural analysis and design. An ongoing experiment of distributed computing in a university environment is described.

Changes in volatile composition and sensory attributes of wines during alcohol content reduction.

PubMed

Longo, Rocco; Blackman, John W; Torley, Peter J; Rogiers, Suzy Y; Schmidtke, Leigh M

2017-01-01

A desirable sensory profile is a major consumer driver for wine acceptability and should be considered during the production of reduced-alcohol wines. Although various viticultural practices and microbiological approaches show promising results, separation technologies such as membrane filtration, in particular reverse osmosis and evaporative perstraction, in addition to vacuum distillation, represent the most common commercial methods used to produce reduced-alcohol wine. However, ethanol removal from wine can result in a significant loss of volatile compounds such as esters (ethyl octanoate, ethyl acetate, isoamyl acetate) that contribute positively to the overall perceived aroma. These losses can potentially reduce the acceptability of the wine to consumers and decrease their willingness to purchase wines that have had their alcohol level reduced. The change in aroma as a result of the ethanol removal processes is influenced by a number of factors: the type of alcohol reduction process; the chemical-physical properties (volatility, hydrophobicity, steric hindrance) of the aroma compounds; the retention properties of the wine non-volatile matrix; and the ethanol level. This review identifies and summarises possible deleterious influences of the dealcoholisation process and describes best practice strategies to maintain the original wine composition. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

[Quality management (TQM) in public health-care (PHC): principles for cost-performance calculations and cost reductions with better quality].

PubMed

Bergholz, W

2008-11-01

In many high-tech industries, quality management (QM) has enabled improvements of quality by a factor of 100 or more, in combination with significant cost reductions. Compared to this, the application of QM methods in health care is in its initial stages. It is anticipated that stringent process management, embedded in an effective QM system will lead to significant improvements in health care in general and in the German public health service in particular. Process management is an ideal platform for controlling in the health care sector, and it will significantly improve the leverage of controlling to bring down costs. Best practice sharing in industry has led to quantum leap improvements. Process management will enable best practice sharing also in the public health service, in spite of the highly diverse portfolio of services that the public health service offers in different German regions. Finally, it is emphasised that "technical" QM, e.g., on the basis of the ISO 9001 standard is not sufficient to reach excellence. It is necessary to integrate soft factors, such as patient or employee satisfaction, and leadership quality into the system. The EFQM model for excellence can serve as proven tool to reach this goal.

The Exploration and Practice of Gradually Industrialization Model in Software Engineering Education: A Factual Instance of the Excellent Engineer Plan of China

ERIC Educational Resources Information Center

Liu, Shu; Ma, Peijun; Li, Dong

2012-01-01

The current education model and practices in the Higher education sector in China have been successful in educating students for academic excellence, for producing industry-linked and practice-oriented graduates, who could quickly fit into the industrial working environment, has been a problem. There is a big gap between the theoretical knowledge…

Interpreting Industrial Practice in the Modern I-A Lab

ERIC Educational Resources Information Center

Johnston, W. L.

1969-01-01

A comparison is made between industrial plant practices and those taught or used in an industrial arts laboratory with emphasis on: (1) control of raw material, (2) space utilization, (3) production methods, (4) employee selection, and (5) product purpose. (GR)

Industrial Relations and Firm Behavior: Informal Labor Practices in the West Coast Longshore Industry.

ERIC Educational Resources Information Center

Finlay, William

1987-01-01

Considers industrial relations policies and practices of stevedore firms in the West Coast longshore industry in terms of the social worker, worker-resource, and institutional theories. Subsidiary firms were more lenient in contract interpretation and more competitive in recruitment, supporting the worker-resource theory. Includes 2 tables and 33…

Analytical Design of Terminally Guided Missiles.

DTIC Science & Technology

1980-01-02

Equivalent Dominant Poles and Zeros Using Industrial Specifications," Trans. on Industrial Electronics and Control Instrumentation, Vol. IECI-26, No...The relaxation of the sampling period requirement and the flexibility of our new method facilitate the practical industrial implementation and...with the Guidance and Control Directorate, U.S. Army Missile Command, Redstone Arsenal, Alabama 35809. I. INTRODUCTION Most practical industrial circuits

Improving the Reverse Logistics Respecting Principles of Sustainable Development in an Industrial Company

NASA Astrophysics Data System (ADS)

Fidlerová, Helena; Mĺkva, Miroslava

2016-06-01

Reverse logistics, the movement of materials back up the supply chain, is recognised by many organisations as an opportunity for adding value. The paper considers the theoretical framework and the conception of reverse logistics in literature and practice. The objective of the article is to propose tangible solutions which eliminate the imbalances in reverse logistics and improve the waste management in the company. The case study focuses on the improvement in the process of waste packaging in the context of sustainable development as a part of reverse logistics in the surveyed industrial company in Slovakia.

Oversight of fare collection practices : summary report

DOT National Transportation Integrated Search

1997-11-01

This report document an oversight study of fare collection practices in the transit industry. The oversight was designed as an investigation of practices currently used in the transit industry to evaluate the impact of farebox revenue collection and ...

Kudzu-Goat Interactions--A Pilot Study

Treesearch

C. Bonsi; E. Rhoden; A. Woldeghebriel; P. Mount; S. Solaiman; R. Noble; G. Paris; Charles McMahon; H. Pearson; B. Cash

1992-01-01

The production and processing of forest products is a major industry in the State of Alabama. Current weed management and control practices rely heavily on the use of herbicides. With the risk of soil and water pollution associated with the use of some agricultural chemicals, the continuing use of such chemicals may become hazardous to human health. The need for...

2009 Mississippi Curriculum Framework: Postsecondary Ophthalmic Technology. (Program CIP-51.1801 - Opticianry/Dispensing Optician)

ERIC Educational Resources Information Center

Sciple, Eddie

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2008 Mississippi Curriculum Framework: Postsecondary Pharmacy Technology. (Program CIP: 51.0805 - Pharmacy Technician/Assistant)

ERIC Educational Resources Information Center

Juergens, John; Sanders, Marsha

2008-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2006 Mississippi Curriculum Framework: Postsecondary Physical Therapist Assistant. (Program CIP: 51.0806 - Physical Therapist Assistant)

ERIC Educational Resources Information Center

Hester, Tom; Latham, Lisa; Crowson, Patti; Ennis, Kimberly

2006-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

The Education of Minority Groups. An Enquiry into Problems and Practices of Fifteen Countries.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

The essays in this volume seek to elucidate the policies and processes whereby groups of students in 15 (mainly industrialized) countries are designated as special, and differential treatment is legitimated, organized, and financed. Essays and authors are as follows: "An Overview of Experience in Fifteen Countries" (W. Donovan, A.…

A Comprehensive Orientation to the World of Work Through Industrial Arts and Vocational Education (Grades 1-12).

ERIC Educational Resources Information Center

Mitchell, E. F.; And Others

In response to the philosophy of vocational education outlined by the National Advisory Council, the Greenwood Public School Administration drew up this proposal for a new educational structure. Designed to prepare students for the world of work through a comprehensive orientation process involving practical arts, vocational education, and…

2011 Mississippi Curriculum Framework: Postsecondary Occupational Therapy Assistant. (Program CIP: 51.0803 - Occupational Therapist Assistant)

ERIC Educational Resources Information Center

Hager, Sherry; Pulver, Tim; Chittom, Suzanne

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Surgical Technology. (Program CIP: 51.0909 - Surgical Technology/Technologist)

ERIC Educational Resources Information Center

Davis, Tonya; Elliott, Jessica; Gandy, Zielda; Binkley, Dottie; Wilburn, Cathy; Ladner, Melissa; Howell, Karen; Shirley, LeAnn; Hinton, Debbie; Allhoff, Tammy

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2006 Mississippi Curriculum Framework: Postsecondary Surgical Technology. (Program CIP: 51.0909 - Surgical Technology/Technologist)

ERIC Educational Resources Information Center

Tice, Tonya; Elliott, Jessica; Gandy, Zielda; Wilkerson, Tammy

2006-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2011 Mississippi Curriculum Framework: Postsecondary Dental Assisting Technology. (Program CIP: 51.0601 - Dental Assisting/Assistant)

ERIC Educational Resources Information Center

Addison, Emily; Bokros, Christy; Gavant, H. Richard; Johnson, Robin

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2011 Mississippi Curriculum Framework: Postsecondary Dental Hygiene Technology. (Program CIP: 51.0602 - Dental Hygienist)

ERIC Educational Resources Information Center

Alexander, Nick; Dunn, Catherine; Hill, Stanley; Lindsay, William

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2008 Mississippi Curriculum Framework: Postsecondary Massage Therapy. (Program CIP: 51.3501 - Massage Therapy/Therapeutic Massage)

ERIC Educational Resources Information Center

Patterson, Teresa; Russell, Cydnee

2008-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

On quantification of residual ink content and deinking efficiency in recycling of mixed office waste paper

Treesearch

Bo Li; Gaosheng Wang; Kefu Chen; David W. Vahey; Junyong Zhu

2011-01-01

Although (flotation) deinking has been a common industry practice for several decades, true residual ink content and deinking efficiency have never been quantified. Paper brightness and ERIC (Effective Residual Ink Concentration), based on measurements of the absorption coefficient of deinked pulp, have been used to determine performance of flotation deinking processes...

2007 Mississippi Curriculum Framework: Postsecondary Optometric Assisting Technology. (Program CIP: 51.1802 - Optometric Technician/Assistant)

ERIC Educational Resources Information Center

Scott, Veronica

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2005 Mississippi Curriculum Framework: Postsecondary Gerontology Technology. (Program CIP: 19.0702 - Gerontology)

ERIC Educational Resources Information Center

Boulton, Mary

2005-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2009 Mississippi Curriculum Framework: Postsecondary Medical Assisting Technology. (Program CIP-51.0801 - Medical /Clinical Assisting)

ERIC Educational Resources Information Center

Roberson, Kaye; King, Christine

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Orientation Manual for Child Care Centres Involved in the Recognition of Overseas Trained Workers.

ERIC Educational Resources Information Center

l'Anson, Christine, Comp.; Harris, Liz, Comp.

This manual has been primarily developed to assist child care center staff who are involved in the process of the recognition of the qualifications of overseas workers within the child care industry in Western Australia. The information and practical exercises provided aim to increase staff's level of awareness and acceptance of cultural…

Bridging the Cognitive-Affective Gaps: Teaching Chemistry while Advancing Affective Objectives. The Singapore Curricular Experience

ERIC Educational Resources Information Center

Tan, Kok Siang; Goh, Ngoh Khang; Chia, Lian Sai

2006-01-01

Chemistry teachers face constraints when trying to integrate cognitive and affective objectives, and hence thoughtful lesson planning is required to achieve the goal. Chemistry teachers can educate students to be knowledgeable about chemical concepts, processes and the benefits of responsible practice by the chemical industry, while being aware,…

Alternative Methods for the Reduction of Evaporation: Practical Exercises for the Science Classroom

ERIC Educational Resources Information Center

Schouten, Peter; Putland, Sam; Lemckert, Charles J.; Parisi, Alfio V.; Downs, Nathan

2012-01-01

Across the world, freshwater is valued as the most critically important natural resource, as it is required to sustain the cycle of life. Evaporation is one of the primary environmental processes that can reduce the amount of quality water available for use in industrial, agricultural and household applications. The effect of evaporation becomes…

Major Employers' Hiring Practices and the Evolving Function of the Professional Master's Degree

ERIC Educational Resources Information Center

Gallagher, Sean R.

2014-01-01

Across the last decade, master's degree attainment has grown dramatically in the United States, as bachelor's degrees have become more common and economic growth has been driven by knowledge industries. A significant value and purpose of degrees is their use as qualifications for jobs. Despite the prominence of degrees in the hiring process, why…

2009 Mississippi Curriculum Framework: Postsecondary Occupational Safety and Health Technology. Program CIP: 15.0701

ERIC Educational Resources Information Center

Flowers, Walter M.

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Physical Therapist Assistant. (Program CIP: 51.0806 - Physical Therapist Assistant)

ERIC Educational Resources Information Center

Hester, Tom; Chapman, Pamela; Crowson, Patti; Ennis, Kimberly

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2011 Mississippi Curriculum Framework: Postsecondary Paramedic. (Program CIP: 51.0904 - Emergency Medical Technology/Technician)

ERIC Educational Resources Information Center

Briscoe, Lisa; Bryant, Katrina; Deschamp, Clyde; Galtelli, Mark; Glasson, Kristi; Hall, David; Hood, Brenda; Mahaffey, Libby; McBryde, John; Read, John; Shirley, Gary

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Clothing and Textile Services. (Program CIP-19.0905)

ERIC Educational Resources Information Center

Redfield, Verlene

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2011 Mississippi Curriculum Framework: Postsecondary Forestry Technology. (Program CIP: 03.0511 - Forest Technology/Technician)

ERIC Educational Resources Information Center

Jones, Luke; Keeton, Jeff

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2007 Mississippi Curriculum Framework: Postsecondary Forestry Technology. (Program CIP: 03.0511 - Forest Technology/Technician)

ERIC Educational Resources Information Center

Johnson, Carl; Loden, Emily; Keeton, Jeff; Thompson, Don; Mitchell, Brian; Couch, Andrew; Walker, Bob; Grado, Steve

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2007 Mississippi Curriculum Framework: Postsecondary Occupational Therapy Assistant. (Program CIP: 51.0803 - Occupational Therapist Assistant)

ERIC Educational Resources Information Center

Hager, Sherry; Pulver, Tim; Chittom, Suzanne

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2006 Mississippi Curriculum Framework: Postsecondary Paralegal Technology. (Program CIP: 22.0302 - Legal Assistant/Paralegal)

ERIC Educational Resources Information Center

Hinton, Amy; Phifer-Starks, Kim D.; Nelson, LaTricia

2006-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Paralegal Technology. (Program CIP: 22.0302 - Legal Assistant/Paralegal)

ERIC Educational Resources Information Center

Cox, Janet; Dinkins, Shivochie L.; Dozier, Darleen; Ford, Kathryn; Hinton, Amy; McDavid, Stephan; Phifer-Starks, Kim D.; Winston, Felicia

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2009 Mississippi Curriculum Framework: Postsecondary Cardiovascular Technology. (Program CIP: 51.0901 - Cardiovascular Technology)

ERIC Educational Resources Information Center

Stanford-Means, Cynthia; Stevens, Richard

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

40 CFR 63.7530 - How do I demonstrate initial compliance with the emission limits and work practice standards?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollutants for Industrial, Commercial, and Institutional Boilers and Process Heaters Testing, Fuel Analyses... 5 and 7 to this subpart OR conducting initial fuel analyses to determine emission rates and... fuel subcategories that burn only fossil fuels and other gases and do not burn any residual oil must...

2009 Mississippi Curriculum Framework: Postsecondary Respiratory Care Technology. (Program CIP: 51.0908 - Respiratory Care Practitioner)

ERIC Educational Resources Information Center

Anderson, Lori; Brooks, Anthony; Miller, Shirley; Newell, Jim; Prince, Beverly; Smith, Jacqueline; Smith, Lynn; Ware, Chris

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2008 Mississippi Curriculum Framework: Postsecondary Radiologic Technology. (Program CIP: 51.0911 - Radiologic Technology/Science - Radiographer)

ERIC Educational Resources Information Center

Armstrong, David; Cochran, Timothy; Compton, Steve; Davis, Jennifer; Edgerton, Seena Shazowee; Kisner, Christie; Lewis, Judy; Sartin, Billie Faye; Shell, Deborah

2008-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2006 Mississippi Curriculum Framework: Postsecondary Dental Assisting Technology. (Program CIP: 51.0601 - Dental Assisting/Assistant)

ERIC Educational Resources Information Center

Addison, Emily; Gavant, H. Richard

2006-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Application of Sludges and Wastewaters on Agricultural Land: A Planning and Educational Guide, MCD-35. Research Bulletin 1090.

ERIC Educational Resources Information Center

Knezek, Bernard D., Ed.; Miller, Robert H., Ed.

This report addresses the application of agricultural processing wastes, industrial and municipal wastes on agricultural land as both a waste management and resource recovery and reuse practice. The document emphasizes the treatment and beneficial utilization of sludge and wastewater as opposed to waste disposal. These objectives are achieved…

Theory and Practice of Chinese-English Bilingual Teaching in Circuit Course

ERIC Educational Resources Information Center

Chen, Xiao

2008-01-01

The Chinese-English bilingual teaching in the circuit course is an important approach to foster innovational talents for the electronic industry in the new century. In this article, we analyze the background, applicability and feasibility of bilingual teaching in the course of circuit and the difficulties facing in the process of implementation.…

Challenges of safe medication practice in paediatric care--a nursing perspective.

PubMed

Star, Kristina; Nordin, Karin; Pöder, Ulrika; Edwards, I Ralph

2013-05-01

To explore nurses' experiences of handling medications in paediatric clinical practice, with a focus on factors that hinder and facilitate safe medication practices. Twenty nurses (registered nurses) from four paediatric wards at two hospitals in Sweden were interviewed in focus groups. The interviews were analysed using content analysis. Six themes emerged from the analysed interviews: the complexity specific for nurses working on paediatric wards is a hindrance to safe medication practices; nurses' concerns about medication errors cause a considerable psychological burden; the individual nurse works hard for safe medication practices and values support from other nurse colleagues; circumstances out of the ordinary are perceived as critical challenges for maintaining patient safety; nurses value clear instructions, guidelines and routines, but these are often missing, variable or changeable; management, other medical professionals, the pharmacy, the pharmaceutical industry and informatics support need to respond to the requirements of the nurses' working situations to improve safe medication practices. Weaknesses were apparent in the long chain of the medication-delivery process. A joint effort by different professions involved in that delivery process, and a nationwide collaboration between hospitals is recommended to increase safe medication practices in paediatric care. ©2013 Foundation Acta Paediatrica. Published by Blackwell Publishing Ltd.

Practical LCA for short shelf life products

NASA Astrophysics Data System (ADS)

Laurin, Lise; Goedkoop, Mark; Norris, Greg

2005-11-01

Manufacturers in many of today's industries are faced with product shelf life counted in months. Traditionally, this has made it very difficult to make a life cycle assessment (LCA) of a product, since the product would be obsolete by the time the LCA was completed. A new concept in LCA that allows specialists in things other than LCA to rapidly create both a model and generate "what-if" scenarios will allow even manufacturers of short shelf life products take advantage of the benefits of LCA. These industry-specific "wizards" are built around a manufacturing process and can be rapidly updated or customized to a particular manufacturer or process type. Results can be used internally for decision-making and can also enable manufacturers submit information for environmentally preferable purchasing, eco-labels, etc.

The Bologna Process Implementation and its Consequent Changes in the Teaching/Learning Model—the Industrial Management and Engineering Degree Case

NASA Astrophysics Data System (ADS)

Luísa Soares, Ana; Costa, Elga; Ferreira, Luís Pinto

2009-11-01

The present paper aims to present a Project included in a diversified programme and consequent implementation of a new Teaching/Learning model adapted to the Industrial Management and Engineering Degree (IMED) of the Management and Industrial Studies School (O'Porto Polytechnic Institute). Owning particular and specific characteristics, this model is based on the graduates' professional profile as well as on the work market dynamics, placing the student in the centre of the Learning Process, in opposition to the `teacher centred' method (as conceived by the Bologna Treat). Diverse in the approach, the model includes differentiating factors when compared to the project based traditional model. Through the development and conception of practical Interdisciplinary Projects, centring knowledges and techniques from the different Industrial Management and Engineering areas, we seek a new way of implementing the `Project Led Education' (PLE) bases, according to the Active Learning paradigm. This teaching/learning model aims to contribute to the Industrial Management and Engineering graduates' formation focused on a high level of performance and professional rectitude, to induce students' enthusiasm and motivation for acquiring scientific and technical knowledge, as well as to satisfy the diverse interest groups' expectations and promote the regional development.

Revenue cycle management.

PubMed

Manley, Ray; Satiani, Bhagwan

2009-11-01

With the widening gap between overhead expenses and reimbursement, management of the revenue cycle is a critical part of a successful vascular surgery practice. It is important to review the data on all the components of the revenue cycle: payer contracting, appointment scheduling, preregistration, registration process, coding and capturing charges, proper billing of patients and insurers, follow-up of accounts receivable, and finally using appropriate benchmarking. The industry benchmarks used should be those of peers in identical groups. Warning signs of poor performance are discussed enabling the practice to formulate a performance improvement plan.

Can public health reconcile profits and pandemics? An analysis of attitudes to commercial sector engagement in health policy and research

PubMed Central

Collin, Jeff; Hill, Sarah E.; Kandlik Eltanani, Mor; Plotnikova, Evgeniya; Ralston, Rob; Smith, Katherine E.

2017-01-01

Background Public health’s terms of engagement with unhealthy commodity industries (alcohol, tobacco and ultra-processed food and drinks) have become increasingly contested in policy and research. We sought to identify approaches that could attract consensus support within and across policy domains. Methods Using snowball sampling, we undertook an online survey of 335 health researchers, advocates and policymakers, in 40 countries, assessing responses to stated principles, claims and recommendations for engaging with unhealthy commodity industries in relation to key policy and research initiatives. Results Most respondents identified a fundamental conflict between industry interests and public health objectives for all three industries, with agreement greatest in relation to tobacco and weakest for food. This pattern was replicated across diverse questions regarding potential forms of engagement, including in rejecting voluntarism and partnership approaches to health policy. While awareness of tobacco industry tactics to influence policy and research was higher than for alcohol and food, most respondents rejected the view that the influence of the latter was less significant for public health. Proposals that health and research organisations should divest their funds attracted less support with respect to food, while restricting publication of industry-funded research in academic journals was the issue that most divided opinion. Respondents reported most difficulty in answering questions about the food industry. Conclusions The strong consensus around restricting interactions with the tobacco industry supports increased implementation of the WHO Framework Convention on Tobacco Control’s conflict of interest provisions. There is strong support for the extension of such practices to the alcohol industry, challenging current norms. More mixed responses indicate a need for greater clarity in defining the food industry, and for research analyzing links, similarities and differences across different types of unhealthy commodity producers. Partnership approaches to addressing non-communicable diseases seem incapable of attracting widespread support across public health, challenging practice in many contexts. PMID:28886049

Can public health reconcile profits and pandemics? An analysis of attitudes to commercial sector engagement in health policy and research.

PubMed

Collin, Jeff; Hill, Sarah E; Kandlik Eltanani, Mor; Plotnikova, Evgeniya; Ralston, Rob; Smith, Katherine E

2017-01-01

Public health's terms of engagement with unhealthy commodity industries (alcohol, tobacco and ultra-processed food and drinks) have become increasingly contested in policy and research. We sought to identify approaches that could attract consensus support within and across policy domains. Using snowball sampling, we undertook an online survey of 335 health researchers, advocates and policymakers, in 40 countries, assessing responses to stated principles, claims and recommendations for engaging with unhealthy commodity industries in relation to key policy and research initiatives. Most respondents identified a fundamental conflict between industry interests and public health objectives for all three industries, with agreement greatest in relation to tobacco and weakest for food. This pattern was replicated across diverse questions regarding potential forms of engagement, including in rejecting voluntarism and partnership approaches to health policy. While awareness of tobacco industry tactics to influence policy and research was higher than for alcohol and food, most respondents rejected the view that the influence of the latter was less significant for public health. Proposals that health and research organisations should divest their funds attracted less support with respect to food, while restricting publication of industry-funded research in academic journals was the issue that most divided opinion. Respondents reported most difficulty in answering questions about the food industry. The strong consensus around restricting interactions with the tobacco industry supports increased implementation of the WHO Framework Convention on Tobacco Control's conflict of interest provisions. There is strong support for the extension of such practices to the alcohol industry, challenging current norms. More mixed responses indicate a need for greater clarity in defining the food industry, and for research analyzing links, similarities and differences across different types of unhealthy commodity producers. Partnership approaches to addressing non-communicable diseases seem incapable of attracting widespread support across public health, challenging practice in many contexts.

Catalytic hydroprocessing of heavy oil feedstocks

NASA Astrophysics Data System (ADS)

Okunev, A. G.; Parkhomchuk, E. V.; Lysikov, A. I.; Parunin, P. D.; Semeikina, V. S.; Parmon, V. N.

2015-09-01

A grave problem of modern oil refining industry is continuous deterioration of the produced oil quality, on the one hand, and increase in the demand for motor fuels, on the other hand. This necessitates processing of heavy oil feedstock with high contents of sulfur, nitrogen and metals and the atmospheric residue. This feedstock is converted to light oil products via hydrogenation processes catalyzed by transition metal compounds, first of all, cobalt- or nickel-promoted molybdenum and tungsten compounds. The processing involves desulfurization, denitrogenation and demetallization reactions as well as reactions converting heavy hydrocarbons to lighter fuel components. The review discusses the mechanisms of reactions involved in the heavy feedstock hydroprocessing, the presumed structure and state of the catalytically active components and methods for the formation of supports with the desired texture. Practically used and prospective approaches to catalytic upgrading of heavy oil feedstock as well as examples of industrial processing of bitumen and vacuum residues in the presence of catalysts are briefly discussed. The bibliography includes 140 references.

Eco-Efficiency Analysis of biotechnological processes.

PubMed

Saling, Peter

2005-07-01

Eco-Efficiency has been variously defined and analytically implemented by several workers. In most cases, Eco-Efficiency is taken to mean the ecological optimization of overall systems while not disregarding economic factors. Eco-Efficiency should increase the positive ecological performance of a commercial company in relation to economic value creation--or to reduce negative effects. Several companies use Eco-Efficiency Analysis for decision-making processes; and industrial examples of best practices in developing and implementing Eco-Efficiency have been reviewed. They clearly demonstrate the environmental and business benefits of Eco-Efficiency. An instrument for the early recognition and systematic detection of economic and environmental opportunities and risks for production processes in the chemical industry began use in 1997, since when different new features have been developed, leading to many examples. This powerful Eco-Efficiency Analysis allows a feasibility evaluation of existing and future business activities and is applied by BASF. In many cases, decision-makers are able to choose among alternative processes for making a product.

Forming interdisciplinary expertise: One organization’s journey on the road to translational nanomedicine

PubMed Central

Ku, Sharon

2012-01-01

This paper provides a sociological account of how researchers of different disciplines become experts in translational nanomedicine. Using a case study of the Nanotechnology Characterization Laboratory (NCL) at the National Cancer Institute (NCI), the author argues that the relationship between the different disciplines involved in translational nanomedicine should be understood in the broader socio-political context of the boundary politics between the academy, industry, and government. This study suggests that the process of training the nanobio expert is not simply a process of inculcating skills; it is also a process of institution-building. In the case of the NCL, sustaining the laboratory’s existence at the interface between the university, industry, and government informed how researchers practiced interdisciplinarity and cultivated their interdisciplinary expertise. It required mobilizing institutional resources through administrative/managerial strategies. Viewing the formation of a professional identity as a social process helps clarify the meaning of interdisciplinarity and provides insight in evaluating the performance of interdisciplinary collaboration and the design of nanoscience education. PMID:22517677

Mergers and acquisitions for the radiologist.

PubMed

Fleishon, Howard B

2008-05-01

In 2006 and the first half of 2007, the rapid pace of global activity contributed to the popularity of mergers and acquisitions (M&A). In fact, the medical imaging industry has a significant history in M&A as well. Along with the expectation of continued growth in medical imaging utilization and other industry trends, radiologists may become more involved in M&A transactions. There is little in the radiology literature dealing with the logistics and pitfalls of M&A. This article is an introduction for radiologists who might consider buying or selling their practices or merging with strategic partners. Although there are significant differences in the approaches of buy or sell situations compared with mergers, they do share several concepts that are outlined. One key to success in M&A transactions is the "process" or approach, which is described with some practical guidelines. Some basic terms and suggestions are also presented for reference.

Budgeting for Solar PV Plant Operations & Maintenance: Practices and Pricing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enbar, Nadav; Weng, Dean; Klise, Geoffrey Taylor

2016-01-01

With rising grid interconnections of solar photovoltaic (PV) systems, greater attention is being trained on lifecycle performance, reliability, and project economics. Expected to meet production thresholds over a 20-30 year timeframe, PV plants require a steady diet of operations and maintenance (O&M) oversight to meet contractual terms. However, industry best practices are only just beginning to emerge, and O&M budgets—given the arrangement of the solar project value chain—appear to vary widely. Based on insights from in-depth interviews and survey research, this paper presents an overview of the utility-scale PV O&M budgeting process along with guiding rationales, before detailing perspectives onmore » current plant upkeep activities and price points largely in the U.S. It concludes by pondering potential opportunities for improving upon existing O&M budgeting approaches in ways that can benefit the industry at-large.« less

Budgeting for Solar PV Plant Operations & Maintenance: Practices and Pricing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enbar, Nadav; Weng, Dean; Klise, Geoffrey Taylor

2015-12-01

With rising grid interconnections of solar photovoltaic (PV) systems, greater attention is being trained on lifecycle performance, reliability, and project economics. Expected to meet production thresholds over a 20-30 year timeframe, PV plants require a steady diet of operations and maintenance (O&M) oversight to meet contractual terms. However, industry best practices are only just beginning to emerge, and O&M budgets—given the arrangement of the solar project value chain—appear to vary widely. Based on insights from in-depth interviews and survey research, this paper presents an overview of the utility-scale PV O&M budgeting process along with guiding rationales, before detailing perspectives onmore » current plant upkeep activities and price points largely in the U.S. It concludes by pondering potential opportunities for improving upon existing O&M budgeting approaches in ways that can benefi t the industry at-large.« less

Feeding a sustainable chemical industry: do we have the bioproducts cart before the feedstocks horse?

PubMed

Dale, Bruce E

2017-09-21

A sustainable chemical industry cannot exist at scale without both sustainable feedstocks and feedstock supply chains to provide the raw materials. However, most current research focus is on producing the sustainable chemicals and materials. Little attention is given to how and by whom sustainable feedstocks will be supplied. In effect, we have put the bioproducts cart before the sustainable feedstocks horse. For example, bulky, unstable, non-commodity feedstocks such as crop residues probably cannot supply a large-scale sustainable industry. Likewise, those who manage land to produce feedstocks must benefit significantly from feedstock production, otherwise they will not participate in this industry and it will never grow. However, given real markets that properly reward farmers, demand for sustainable bioproducts and bioenergy can drive the adoption of more sustainable agricultural and forestry practices, providing many societal "win-win" opportunities. Three case studies are presented to show how this "win-win" process might unfold.

A study for safety and health management problem of semiconductor industry in Taiwan.

PubMed

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

[Automation and organization of technological process of urinalysis].

PubMed

Kolenkin, S M; Kishkun, A A; Kol'chenko, O L

2000-12-01

Results of introduction into practice of a working model of industrial technology of laboratory studies and KONE Specific Supra and Miditron M devices are shown as exemplified by clinical analysis of the urine. This technology helps standardize all stages and operations, improves the efficiency of quality control of laboratory studies, rationally organizes the work at all stages of the process, creates a system for permanent improvement of the efficiency of investigations at the preanalytical, analytical, and postanalytical stages of technological process of laboratory studies. As a result of introduction of this technology into laboratory practice, violations of quality criteria of clinical urinalysis decreased from 15 to 8% at the preanalytical stage and from 6 to 3% at the analytical stage. Automation of the analysis decreased the need in reagents 3-fold and improved the productivity at the analytical stage 4-fold.

Analysis of Food Contaminants, Residues, and Chemical Constituents of Concern

NASA Astrophysics Data System (ADS)

Ismail, Baraem; Reuhs, Bradley L.; Nielsen, S. Suzanne

The food chain that starts with farmers and ends with consumers can be complex, involving multiple stages of production and distribution (planting, harvesting, breeding, transporting, storing, importing, processing, packaging, distributing to retail markets, and shelf storing) (Fig. 18.1). Various practices can be employed at each stage in the food chain, which may include pesticide treatment, agricultural bioengineering, veterinary drug administration, environmental and storage conditions, processing applications, economic gain practices, use of food additives, choice of packaging material, etc. Each of these practices can play a major role in food quality and safety, due to the possibility of contamination with or introduction (intentionally and nonintentionally) of hazardous substances or constituents. Legislation and regulation to ensure food quality and safety are in place and continue to develop to protect the stakeholders, namely farmers, consumers, and industry. [Refer to reference (1) for information on regulations of food contaminants and residues.

Comparison of Quality Engineering Practices in Malaysian and Indonesian Automotive Related Companies

NASA Astrophysics Data System (ADS)

Putri, Nilda Tri; Sha'ri Mohd, Yusof; Irianto, Dradjad

2016-02-01

The main motivating factor driving this research is to find differences between the automotive related companies in Malaysia and Indonesia with regard to quality engineering (QE) implementation. A comparative study between Malaysia and Indonesia provides the opportunity to gain perspective and thorough understanding of the similarities and differences on the critical factors for successful QE practices in the context of both these countries. Face to face interviews are used to compare the QE practices in two automotive companies in Malaysia and Indonesia, respectively. The findings of study showed that both countries have clear quality objectives to achieving zero defects in processes and products and total customer satisfaction. Top and middle management in both countries were found to be directly involved in quality improvement on the shop floor to provide On-The-Job training and actively encourage team members to perform quality problem solving through the formation of quality control circles (QCC) particularly in Indonesia automotive industry. In Malaysia automotive industry, the implementation was not fully effective, but they have started to cultivate those values in the daily execution. Based on the case study results and analysis, the researcher has provided suggestions for both countries as an improvement plan for successful QE implementation. These recommendations will allow management to implement appropriate strategies for better QE implementation which hopefully can improve company's performance and ultimately the making the automotive industry in both countries to reach world class quality. It is strongly believed that the findings of this study can help Malaysia and Indonesia automotive industries in their efforts to become more effective and competitive.

Evaluation of Practicing sustainable Industrial Solid Waste Minimization by Manufacturing Firms in Malaysia: Strengths and Weaknesses.

PubMed

Mallak, Shadi Kafi; Bakri Ishak, Mohd; Mohamed, Ahmad Fariz

2016-09-13

Malaysia is facing an increasing trend in industrial solid waste generation due to industrial development.Thus there is a paramount need in taking a serious action to move toward sustainable industrial waste management. The main aim of this study is to assess practicing solid waste minimization by manufacturing firms in Shah Alam industrial state, Malaysia. This paper presents a series of descriptive and inferential statistical analysis regarding the level and effects of practicing waste minimization methods, and seriousness of barriers preventing industries from practicing waste minimization methods. For this purpose the survey questions were designed such that both quantitative (questionnaire) and qualitative (semi-structures interview) data were collected concurrently. Analysis showed that, the majority of firms (92%) dispose their wastes rather than practice other sustainable waste management options. Also waste minimization methods such as segregation of wastes, on-site recycle and reuse, improve housekeeping and equipment modification were found to have significant contribution in waste reduction (p<0.05). Lack of expertise (M=3.50), lack of enough information (M= 3.54), lack of equipment modification (M= 3.16) and lack of specific waste minimization guidelines (M=3.49) have higher mean scores comparing with other barriers in different categories. These data were interpreted for elaborating of SWOT and TOWS matrix to highlight strengths, weaknesses, threats and opportunities. Accordingly, ten policies were recommended for improvement of practicing waste minimization by manufacturing firms as the main aim of this research. Implications This manuscript critically analysis waste minimization practices by manufacturing firms in Malaysia. Both qualitative and quantitative data collection and analysis were conducted to formulate SWOT and TOWS matrix in order to recommend policies and strategies for improvement of solid waste minimization by manufacturing industries. The results contribute to the knowledge and the findings of this study provide a useful baseline information and data on industrial solid waste generation and waste minimization practice.

An Ethical (Descriptive) Framework for Judgment of Actions and Decisions in the Construction Industry and Engineering-Part I.

PubMed

Alkhatib, Omar J; Abdou, Alaa

2018-04-01

The construction industry is usually characterized as a fragmented system of multiple-organizational entities in which members from different technical backgrounds and moral values join together to develop a particular business or project. The greatest challenge in the construction process for the achievement of a successful practice is the development of an outstanding reputation, which is built on identifying and applying an ethical framework. This framework should reflect a common ethical ground for myriad people involved in this process to survive and compete ethically in today's turbulent construction market. This study establishes a framework for ethical judgment of behavior and actions conducted in the construction process. The framework was primarily developed based on the essential attributes of business management identified in the literature review and subsequently incorporates additional attributes identified to prevent breaches in the construction industry and common ethical values related to professional engineering. The proposed judgment framework is based primarily on the ethical dimension of professional responsibility. The Ethical Judgment Framework consists of descriptive approaches involving technical, professional, administrative, and miscellaneous terms. The framework provides the basis for judging actions as either ethical or unethical. Furthermore, the framework can be implemented as a form of preventive ethics, which would help avoid ethical dilemmas and moral allegations. The framework can be considered a decision-making model to guide actions and improve the ethical reasoning process that would help individuals think through possible implications and consequences of ethical dilemmas in the construction industry.

Caught between the global economy and local bureaucracy: the barriers to good waste management practice in South Africa.

PubMed

Godfrey, Linda; Scott, Dianne; Trois, Cristina

2013-03-01

Empirical research shows that good waste management practice in South Africa is not always under the volitional control of those tasked with its implementation. While intention to act may exist, external factors, within the distal and proximal context, create barriers to waste behaviour. In addition, these barriers differ for respondents in municipalities, private industry and private waste companies. The main barriers to implementing good waste management practice experienced by respondents in municipalities included insufficient funding for waste management and resultant lack of resources; insufficient waste knowledge; political interference in decision-making; a slow decision-making process; lack of perceived authority to act by waste staff; and a low priority afforded to waste. Barriers experienced by respondents in private industry included insufficient funding for waste and the resultant lack of resources; insufficient waste knowledge; and government bureaucracy. Whereas, barriers experienced in private waste companies included increasing costs; government bureaucracy; global markets; and availability of waste for recycling. The results suggest that respondents in public and private waste organizations are subject to different structural forces that shape, enable and constrain waste behaviour.

Recycling Titanium and Its Alloys by Utilizing Molten Salt

NASA Astrophysics Data System (ADS)

Okabe, Toru H.; Taninouchi, Yu-ki

It is commonly believed that the deoxidation of titanium (Ti), or the direct removal of oxygen (O) dissolved in metallic Ti, is practically impossible when magnesium (Mg) is used as the deoxidizing agent. In recent years, it has been experimentally demonstrated that O dissolved in Ti can be directly removed using MgCl2 molten salt electrolysis. By the electrochemical deoxidation technique, Ti wires containing 0.12 mass% O were deoxidized to less than 0.02 mass% O. In some cases, the concentration of O in the Ti wires was reduced to the level of 0.01 mass% O, which cannot be attained using the current Kroll process. The possible application of this deoxidation technique to practical industrial recycling processes is also discussed.

Waste heat utilization in industrial processes

NASA Technical Reports Server (NTRS)

Weichsel, M.; Heitmann, W.

1978-01-01

A survey is given of new developments in heat exchangers and heat pumps. With respect to practical applications, internal criteria for plant operation are discussed. Possibilities of government support are pointed out. Waste heat steam generators and waste heat aggregates for hot water generation or in some cases for steam superheating are used. The possibilities of utilization can be classified according to the economic improvements and according to their process applications, for example, gascooling. Examples are presented for a large variety of applications.

Underground Coal Preparation System and Applications

NASA Astrophysics Data System (ADS)

Wei, Cao; DeYong, Shang; BaoNing, Zhang

2018-03-01

The underground coal preparation is a cutting-edge technology of the coal industry worldwide. This paper introduced the meaning of implementing the underground coal preparation, and the practical applications of underground mechanical moving screen jig, underground heavy medium shallow slot and underground air jigger. Through analyzing the main separation equipment and the advantages and disadvantages of three primary processes from aspects of process complexity, slime water treatment, raw coal preparation, etc., the difference among technology investment, construction scale, production cost and economic benefit is concluded.

Laser-induced incandescence: Particulate diagnostics for combustion, atmospheric, and industrial applications

DOE PAGES

Michelsen, H. A.; Schulz, C.; Smallwood, G. J.; ...

2015-09-09

The understanding of soot formation in combustion processes and the optimization of practical combustion systems require in situ measurement techniques that can provide important characteristics, such as particle concentrations and sizes, under a variety of conditions. Of equal importance are techniques suitable for characterizing soot particles produced from incomplete combustion and emitted into the environment. Also, the production of engineered nanoparticles, such as carbon blacks, may benefit from techniques that allow for online monitoring of these processes.

Advancing neurosurgery through translational research.

PubMed

Lacey, Claire; Sutherland, Garnette

2013-01-01

Every year, the number of published research articles increases significantly. However, many potentially useful ideas are lost in this flood of data. Translational research provides a framework through which investigators or laboratories can maximize the likelihood that the product of their research will be adopted in medical practice. There are 2 recognizable models of translation appropriate for the majority of research: investigator driven and industry enabled. Investigator-driven research has more range because it does not have to consider the profit margin of research, but it is a slow process. The industry-enabled model accelerates the translational research process through the power of industry funding but is interested primarily in products with potential for profit. Two cases are examined to illustrate different methods of partnering with industry. IMRIS is a company founded by investigators to distribute intraoperative magnetic resonance imaging technology based on a movable high-field magnet. It took 7 years for IMRIS to make its first sale, but it is now a successful company. With neuroArm, a surgical robot, investigators decided to sell the intellectual property to an established company to ensure successful global commercialization. Translational research advances medicine by creating and distributing effective solutions to contemporary problems.

A case study of dermatitis based on a collaborative approach between occupational physicians and industrial hygienists.

PubMed

Percival, L; Tucker, S B; Lamm, S H; Key, M M; Wilds, B; Grumski, K S

1995-02-01

An example of interdisciplinary problem solving by occupational health professionals is presented. Approximately one dozen employees in an aircraft wire harness assembly line complained of dermatitis, alleging workplace exposures as causation. The plant's and consulting industrial hygienists prepared toxicology and exposure assessments for all process materials, manufacturing procedures, and protective equipment used. They identified no common elements in the work environment that may have caused the dermatitis, suggesting multiple causation and possible individual worker sensitivities. An investigative team composed of the industrial hygienists and physicians in outside practice, including dermatologists and occupational medicine physicians, conducted a review of plant operations and proposed that workers with dermatitis complaints receive diagnostic medical examinations. An initial examination medically documented each worker's complaint, and a follow-up included patch testing for selected process materials. The physicians diagnosed a variety of mainly nonoccupationally induced illnesses such as fungal infections, skin cancer (solar induced), acne, etc., confirming the industrial hygienists' original assessment. One case appeared directly work-related and to be a specific assembly component sensitivity. Although several cases with a nonoccupational origin could have been aggravated by working conditions, these workers showed no sensitivity to the component when patch tested.

From Vineyard Soil to Wine Fermentation: Microbiome Approximations to Explain the “terroir” Concept

PubMed Central

Belda, Ignacio; Zarraonaindia, Iratxe; Perisin, Matthew; Palacios, Antonio; Acedo, Alberto

2017-01-01

Wine originally emerged as a serendipitous mix of chemistry and biology, where microorganisms played a decisive role. From these ancient fermentations to the current monitored industrial processes, winegrowers and winemakers have been continuously changing their practices according to scientific knowledge and advances. A new enology direction is emerging and aiming to blend the complexity of spontaneous fermentations with industrial safety of monitored fermentations. In this context, wines with distinctive autochthonous peculiarities have a great acceptance among consumers, causing important economic returns. The concept of terroir, far from being a rural term, conceals a wide range of analytical parameters that are the basis of the knowledge-based enology trend. In this sense, the biological aspect of soils has been underestimated for years, when actually it contains a great microbial diversity. This soil-associated microbiota has been described as determinant, not only for the chemistry and nutritional properties of soils, but also for health, yield, and quality of the grapevine. Additionally, recent works describe the soil microbiome as the reservoir of the grapevine associated microbiota, and as a contributor to the final sensory properties of wines. To understand the crucial roles of microorganisms on the entire wine making process, we must understand their ecological niches, population dynamics, and relationships between ‘microbiome- vine health’ and ‘microbiome-wine metabolome.’ These are critical steps for designing precision enology practices. For that purpose, current metagenomic techniques are expanding from laboratories, to the food industry. This review focuses on the current knowledge about vine and wine microbiomes, with emphasis on their biological roles and the technical basis of next-generation sequencing pipelines. An overview of molecular and informatics tools is included and new directions are proposed, highlighting the importance of –omics technologies in wine research and industry. PMID:28533770

Restaurant Food Cooling Practices†

PubMed Central

BROWN, LAURA GREEN; RIPLEY, DANNY; BLADE, HENRY; REIMANN, DAVE; EVERSTINE, KAREN; NICHOLAS, DAVE; EGAN, JESSICA; KOKTAVY, NICOLE; QUILLIAM, DANIELA N.

2017-01-01

Improper food cooling practices are a significant cause of foodborne illness, yet little is known about restaurant food cooling practices. This study was conducted to examine food cooling practices in restaurants. Specifically, the study assesses the frequency with which restaurants meet U.S. Food and Drug Administration (FDA) recommendations aimed at reducing pathogen proliferation during food cooling. Members of the Centers for Disease Control and Prevention’s Environmental Health Specialists Network collected data on food cooling practices in 420 restaurants. The data collected indicate that many restaurants are not meeting FDA recommendations concerning cooling. Although most restaurant kitchen managers report that they have formal cooling processes (86%) and provide training to food workers on proper cooling (91%), many managers said that they do not have tested and verified cooling processes (39%), do not monitor time or temperature during cooling processes (41%), or do not calibrate thermometers used for monitoring temperatures (15%). Indeed, 86% of managers reported cooling processes that did not incorporate all FDA-recommended components. Additionally, restaurants do not always follow recommendations concerning specific cooling methods, such as refrigerating cooling food at shallow depths, ventilating cooling food, providing open-air space around the tops and sides of cooling food containers, and refraining from stacking cooling food containers on top of each other. Data from this study could be used by food safety programs and the restaurant industry to target training and intervention efforts concerning cooling practices. These efforts should focus on the most frequent poor cooling practices, as identified by this study. PMID:23212014

A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

PubMed

Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

2008-01-01

The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

Industrial Energy Efficiency Practices in Indonesia: Lesson Learned from Astra Green Energy (AGen) Award

NASA Astrophysics Data System (ADS)

Telaga, A. S.; Hartanto, I. D.

2017-03-01

Many countries have used award system to promote energy efficiency practices in industry. The award system has been found to have significant impact to increase energy conservation and sustainability adoption in companies. Astra International (AI) as a holding company of more than 200 companies also organised Astra green energy (AGen) award to all affiliated companies (AFFCO) in Astra group. The event has been used to share energy efficiency best practices among AFFCO in Astra group. AFFCOs of Astra International are among the biggest and the leader in their industrial sectors Therefore, analyses from AFFO’s energy efficiency case studies represents current practices in Indonesia industrial sectors. Analyses are divided into industry, building, and renewable energy. The results from analyses found that AFFCOs already aware of energy conservation and have implemented projects to promote energy efficiency. However, the AFFCOs do not optimally use monitoring data for energy reduction.

Evaluation of the effect of a health education campaign of HIV by using an analytical hierarchy process method.

PubMed

Tan, Xiaodong; Lin, Jianyan; Wang, Fengjie; Luo, Hong; Luo, Lan; Wu, Lei

2007-09-01

This study was designed to understand the status of HIV/AIDS knowledge, attitude and practice (KAP) among different populations and to provide scientific evidences for further health education. Three rounds of questionnaires were administered among service industry workers who were selected through stratified cluster sampling. Study subjects included hotel attendants, employees of beauty parlors and service workers of transportation industry. Data were analyzed using the analytical hierarchy process. All demonstrated high KAP overall. Synthetic scoring indexes of the three surveys were above 75%. However, the correct response rate on questions whether mosquito bite can transmit HIV/AIDS and what is the relationship between STD with HIV was unsatisfactory (lower than expected); and their attitudes towards people living with HIV and AIDS need to be improved. Moreover, the effect of health education on these groups was unclear. In conclusion, analytical hierarchy process is a valid method in estimating overall effect of HIV/AIDS health education. Although the present status of HIV/AIDS KAP among the service industry workers was relatively good, greater efforts should be made to improve their HIV transmission knowledge, attitude and understanding of the relationship between STDs and HIV.

Industry best practices for the software development life cycle

DOT National Transportation Integrated Search

2007-11-01

In the area of software development, there are many different views of what constitutes a best practice. The goal of this project was to identify a set of industry best practice techniques that fit the needs of the Montana Department of Transportatio...

Improvement of nuclear power plants within the perspective of applications of lean manufacturing practices

NASA Astrophysics Data System (ADS)

Malek, A. K.; Muhammad, H. I.; Rosmaini, A.; Alaa, A. S.; Falah, A. M.

2017-09-01

Development and improvement process are essential to the companies and factories of various kinds and this necessity is related aspects of cost, time and risk that can be avoided, these aspects are available at the nuclear power stations essential demands cannot be ignored. The lean management technique is one of the recent trends in the management system. Where the lean management is stated as the system increases the customer value and reduces the wastage process in an industry or in a power plants. Therefore, there is an urgent necessity to ensure the development and improvement in nuclear power plants in the pre-established in process of being established and stage of the management and production. All of these stages according to the study are closely related to the necessity operationalize and apply lean manufacturing practices that these applications are ineffective and clear contribution to reduce costs and control of production processes and the process of reducing future risks that could be exposed to the station.

Technical challenges in designing post-marketing eCRFs to address clinical safety and pharmacovigilance needs.

PubMed

Lu, Zhengwu

2010-01-01

To identify key challenges and propose technical considerations in designing electronic case report form (eCRF) for post-marketing studies, the author undertakes a comprehensive literature review of peer reviewed and grey literature to assess the key aspects, processes, standards, recommendations, and best practices in designing eCRFs based on industry experience in designing and supporting electronic data capture (EDC) studies. Literature search using strings on MEDLINE and PUBMED returned few papers directly related to CRF design. Health informatics and general practice journals were searched and results reviewed. Many conference, government commission, health professional and special interests group websites provide relevant information from practical experience - summarization of this information is presented. Further, we presented a list of concrete technical considerations in dealing with EDC technology/system limitations based on literature assessment and industry implementation experience. It is recognized that cross-functional teams be involved in eCRF design process and decision making. To summarize the keys in designing eCRFs to address post-market study safety and pharmacovigilance needs, the first is to identify required data elements from the study protocol supporting data analyses and reporting requirements. Secondly, accepted best practices, CDASH & CDISC guidelines, and company internal or therapeutic unit standard should be considered and applied. Coding (MedDRA & WHODD) mapping should be managed and implemented as well when possible. Finally, we need to be on top of the EDC technologies, challenge the technologies, drive EDC improvement via working with vendors, and utilize the technologies to drive clinical effectiveness. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Problematizing special observation in psychiatry: Foucault, archaeology, genealogy, discourse and power/knowledge.

PubMed

Stevenson, C; Cutcliffe, J

2006-12-01

Special observation by mental health professionals is the recommended approach for those people deemed as at risk or risky. Recent research and academic writing have challenged the benefits of observing people/patients who are defined as 'at risk', and a more human engagement process is being recommended. Despite this assault, practice has not changed substantively, suggesting a need for a thorough exploration and questioning of the practices and process. The paper outlines three Foucaultian approaches to historical analysis. It applies aspects of Foucault's archaeology/genealogy, discourse and power/knowledge to explore the practices of special observation as a means of controlling risk, especially suicide risk. We identify the regulatory function of the 'gaze', professional codes and government policy in relation to restricting professional practices. We argue that observation can be related to moral therapy, wherein the person relinquishes madness for responsibility through a disciplinary process and, in governing risk, a 'professional industry' is created. The regulation of statements about people with mental health issues are exposed and related to what can be said and done by professionals. Finally, we look at productive power in relation to observation, and how it is intimately related to resistance. We conclude with 'soft' recommendations for practice discursively produced through the writing of the paper.

Analysis of the corporate political activity of major food industry actors in Fiji.

PubMed

Mialon, Melissa; Swinburn, Boyd; Wate, Jillian; Tukana, Isimeli; Sacks, Gary

2016-05-10

Non-communicable diseases (NCDs) are the leading cause of mortality in Fiji, a middle-income country in the Pacific. Some food products processed sold and marketed by the food industry are major contributors to the NCD epidemic, and the food industry is widely identified as having strong economic and political power. However, little research has been undertaken on the attempts by the food industry to influence public health-related policies and programs in its favour. The "corporate political activity" (CPA) of the food industry includes six strategies (information and messaging; financial incentives; constituency building; legal strategies; policy substitution; opposition fragmentation and destabilisation). For this study, we aimed to gain a detailed understanding of the CPA strategies and practices of major food industry actors in Fiji, interpreted through a public health lens. We implemented a systematic approach to monitor the CPA of the food industry in Fiji for three months. It consisted of document analysis of relevant publicly available information. In parallel, we conducted semi-structured interviews with 10 stakeholders involved in diet- and/or public health-related issues in Fiji. Both components of the study were thematically analysed. We found evidence that the food industry adopted a diverse range of strategies in an attempt to influence public policy in Fiji, with all six CPA strategies identified. Participants identified that there is a substantial risk that the widespread CPA of the food industry could undermine efforts to address NCDs in Fiji. Despite limited public disclosure of information, such as data related to food industry donations to political parties and lobbying, we were able to identify many CPA practices used by the food industry in Fiji. Greater transparency from the food industry and the government would help strengthen efforts to increase their accountability and support NCD prevention. In other low- and middle-income countries, it is likely that a systematic document analysis approach would also need to be supplemented with key informant interviews to gain insight into this important influence on NCD prevention.

The watershed-scale optimized and rearranged landscape design (WORLD) model and local biomass processing depots for sustainable biofuel production: Integrated life cycle assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eranki, Pragnya L.; Manowitz, David H.; Bals, Bryan D.

An array of feedstock is being evaluated as potential raw material for cellulosic biofuel production. Thorough assessments are required in regional landscape settings before these feedstocks can be cultivated and sustainable management practices can be implemented. On the processing side, a potential solution to the logistical challenges of large biorefi neries is provided by a network of distributed processing facilities called local biomass processing depots. A large-scale cellulosic ethanol industry is likely to emerge soon in the United States. We have the opportunity to influence the sustainability of this emerging industry. The watershed-scale optimized and rearranged landscape design (WORLD) modelmore » estimates land allocations for different cellulosic feedstocks at biorefinery scale without displacing current animal nutrition requirements. This model also incorporates a network of the aforementioned depots. An integrated life cycle assessment is then conducted over the unified system of optimized feedstock production, processing, and associated transport operations to evaluate net energy yields (NEYs) and environmental impacts.« less

High Power Laser Processing Of Materials

NASA Astrophysics Data System (ADS)

Martyr, D. R.; Holt, T.

1987-09-01

The first practical demonstration of a laser device was in 1960 and in the following years, the high power carbon dioxide laser has matured as an industrial machine tool. Modern carbon dioxide gas lasers can be used for cutting, welding, heat treatment, drilling, scribing and marking. Since their invention over 25 years ago they are now becoming recognised as highly reliable devices capable of achieving huge savings in production costs in many situations. This paper introduces the basic laser processing techniques of cutting, welding and heat treatment as they apply to the most common engineering materials. Typical processing speeds achieved with a wide range of laser powers are reported. Accuracies achievable and fit-up tolerances required are presented. Methods of integrating lasers with machine tools are described and their suitability in a wide range of manufacturing industries is described by reference to recent installations. Examples from small batch manufacturing, high volume production using dedicated laser welding equipment, and high volume manufacturing using 'flexible' automated laser welding equipment are described Future applications of laser processing are suggested by reference to current process developments.

Changing corporate practices to reduce cancer disparities.

PubMed

Freudenberg, Nicholas; Galea, Sandro; Fahs, Marianne

2008-02-01

While reducing racial/ethnic and socioeconomic disparities in cancer mortality has been identified as a national goal, current policies are unlikely to achieve it. In order to advance the development of policies for the primary prevention of cancer and cancer disparities, we propose that the practices of the tobacco, alcohol, and food industries be considered as modifiable social determinants of health. We review evidence that the practices of these industries in product design, marketing, retail distribution, and pricing contribute to cancer risk behavior, incidence, and disparities, then examine public health strategies designed to reduce health-damaging practices of these industries and encourage healthier alternatives. We conclude with recommendations for research, practice, and policy that could contribute to the development of less carcinogenic corporate practices.

Developing an English for Specific Purpose Curriculum for Asian Call Centres: How Theory Can Inform Practice

ERIC Educational Resources Information Center

Lockwood, Jane

2012-01-01

The primary focus of this article is the investigation of how current applied linguistic research into the nature of call centre communication breakdown in business processing outsourcing (BPO) sites such as India and the Philippines, can impact English communications training program content and design for this industry. It is argued that a…

2011 Mississippi Curriculum Framework: Postsecondary Conservation Law Enforcement Technology. (Program CIP: 03.0208 - Natural Resources Management and Policy, Other)

ERIC Educational Resources Information Center

Jones, Luke; Myrick, Dwight

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2008 Mississippi Curriculum Framework: Postsecondary Irrigation Management Technology. (Program CIP:01.0699 - Applied Horticulture/Horticultural Business Services, Other)

ERIC Educational Resources Information Center

Oliver, Michael L.

2008-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Business and Education as Push-Pull Processes: An Alliance of Philosophy and Practice.

ERIC Educational Resources Information Center

Arif, Mohammed; Smiley, Frederick M.; Kulonda, Dennis J.

2005-01-01

In the 1960s, the U.S. business community utilized the term "push/pull" to indicate whether or not industry should use the "one-size-fits all" or whether it should listen to consumers' needs and feedback as a system of producing and marketing products. As well, U.S. public education has become much more accountability-laden…

2008 Mississippi Curriculum Framework: Postsecondary Food Production and Management Technology. (Program CIP: 12.0508 - Institutional Food Workers)

ERIC Educational Resources Information Center

Carver, Matthew; Hoff, Jody; Little, Lisa; Samuel, Carolyn

2008-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Development and Testing of an Experimental Polysensory Instructional System for Teaching Electric Arc Welding Processes. Report No. 24. Final Report.

ERIC Educational Resources Information Center

Sergeant, Harold A.

The population of the study consisted of 15 high school industrial arts students, 10 freshman and sophomore college students, and 10 adults. A polysensory, self-pacing instructional system was developed which included (1) pretests and post tests, (2) a general instruction book, (3) equipment to practice arc welding, (4) programed instruction…

Progress Towards a Uniform U.S. Government Patent Policy for Universities and Non-Profit Organizations.

ERIC Educational Resources Information Center

Latker, Norman J.

The Constitution of the United States specifically addresses the question of intellectual property rights. This provision is not only noble but also practical, since it recognizes that the whole of society is best served when the creators are singled out and given special treatment. In the process of industrialization of this country, resources…

Mining machines effectiveness and OEE Indicator

NASA Astrophysics Data System (ADS)

Korski, Jacek; Tobór-Osadnik, Katarzyna; Wyganowska, Małgorzata

2017-11-01

The situation in the hard coal industry in Poland is forcing the identification of effectual and practical indicators of the effectiveness of machinery and equipment. In the article, the authors discuss the possible use of the OEE indicator for the evaluation of production processes in hard-coal mines. In summary, recommendations are made to enable efficiency assessment of mining machinery using the OEE.

2006 Mississippi Curriculum Framework: Postsecondary Veterinary Technology. (Program CIP: 51.0808 - Veterinary/Animal Health Technology/Technician and Veterinary Assistant)

ERIC Educational Resources Information Center

Glenn, Bobby

2006-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Veterinary Technology. (Program CIP: 51.0808 - Veterinary/Animal Health Technology/Technician and Veterinary Assistant)

ERIC Educational Resources Information Center

Glenn, Bobby; Sills, Kirby

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2005 Mississippi Curriculum Framework: Postsecondary Banking and Finance Technology. (Program CIP: 52.0803 - Banking and Financial Support Services)

ERIC Educational Resources Information Center

Gullett, Janet; Thigpen, Herbert

2005-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Banking and Finance Technology. (Program CIP: 52.0803 - Banking and Financial Support Services)

ERIC Educational Resources Information Center

Gullett, Janet; Dinkins, Shivochie

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2009 Mississippi Curriculum Framework: Postsecondary Early Childhood Education Technology. (Program CIP: 19.0709 - Child Care Provider/Assistant)

ERIC Educational Resources Information Center

Shumate, Win; Greene, Mary A.; Ford, Sandra; Jones, Pamela; Anders, Sheri

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2007 Mississippi Curriculum Framework: Postsecondary Agricultural Mechanics Technology. (Program CIP: 01.0201 - Agricultural Mechanics and Equipment/Machine Technology)

ERIC Educational Resources Information Center

Massey, Jeremy; Louwerens, Shane; Galey, Joe

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2011 Mississippi Curriculum Framework: Postsecondary Agricultural Technician Technology. (Program CIP: 01.0201 - Agricultural Mechanics and Equipment/Machine Technology)

ERIC Educational Resources Information Center

Massey, Jeremy; Louwerens, Shane; Galey, Joe

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Meat Merchandising Technology. (Program CIP: 12.0506 - Meat Cutting/Meat Cutter)

ERIC Educational Resources Information Center

Jones, Roger; Currie, Lamar; Clayton, Sheila

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

The Study of Technical and Vocational Education and Training Needs of Dairy and Cooking Oil Producing Companies in Tehran Province

ERIC Educational Resources Information Center

Jabbari, Lotfali

2015-01-01

Education is not merely provision of information from trainer to learner, but the point is that this person requires practical educations for some of its tasks. By considering industrialization of manufacturing processes, economic development cannot happen without considering the Technical and vocational education and training (TVET). Since the…

2010 Mississippi Curriculum Framework: Postsecondary Emergency Medical Technician. (Program CIP: 51.0904 - Emergency Medical Technology/Technician)

ERIC Educational Resources Information Center

Briscoe, Lisa; Bryant, Katrina; Galtelli, Mark; Glasson, Kristi; Hall, David; Hood, Brenda; Mahaffey, Libby; McBryde, John; Read, John; Shirley, Gary; Wright, Al

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2009 Mississippi Curriculum Framework: Postsecondary Funeral Service Technology. (Program CIP-12.0301 - Funeral Service and Mortuary Science)

ERIC Educational Resources Information Center

Anderson, Larry; Dickerson, Octavia; Harvey, Bill; Moore, Tony

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Implementing Best Practices for Major Business Processes in the Department of Defense

DTIC Science & Technology

2014-07-24

95 Figures and Tables Figure 1- Past budget declines following major military engagements...US Navy and COL Leslie Caballero, US Army served as the military representatives. APPROACH The Task Group’s draft findings and recommendations were...Group interviewed over 30 individuals from government, think tanks, and private industry, including current and recent DoD senior military and

2009 Mississippi Curriculum Framework: Postsecondary Nuclear Medicine Technology. (Program CIP: 51.0905 - Nuclear Medical Technology/Technologist)

ERIC Educational Resources Information Center

Boney, Linda; Lee, Joanne; Pyles, Alice; Whitfield, Stacy

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2007 Mississippi Curriculum Framework: Postsecondary Meat Merchandising Technology (Program CIP: 12.0506 - Meat Cutting/Meat Cutter)

ERIC Educational Resources Information Center

Jones, Roger; Currie, Lamar; Clayton, Sheila

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2011 Mississippi Curriculum Framework: Postsecondary Diagnostic Medical Sonography Technology. (Program CIP: 51.0910 - Diagnostic Medical Sonography/Sonographer and Ultrasound)

ERIC Educational Resources Information Center

Finch, Wanda; Wilson, Lesa

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

ROMI 4.0: Rough mill simulator 4.0 users manual

Treesearch

R. Edward Thomas; Timo Grueneberg; Urs Buehlmann

2015-01-01

The Rough MIll simulator (ROMI Version 4.0) is a computer software package for personal computers (PCs) that simulates current industrial practices for rip-first, chop-first, and rip and chop-first lumber processing. This guide shows how to set up the software; design, implement, and execute simulations; and examine the results. ROMI 4.0 accepts cutting bills with as...

76 FR 59771 - Ag Processing Inc A Cooperative-Petition for Declaratory Order; Institute Proceeding and Hold...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... at http://www.stb.dot.gov , under ``Information Center''/``Webcast''/``Live Video'' on the home page...) Industry practice relating to cars made overweight by snow or ice; (2) how frequently closed-hopper cars and tank cars are made overweight by snow and ice and how those cars have been brought into compliance...

2009 Mississippi Curriculum Framework: Postsecondary Health Information Technology. (Program CIP-51.0707-Medical Records Technology/Technician)

ERIC Educational Resources Information Center

Hoffman, Casey; Jones, Robin; McGuffee, Michelle; Scott, Nena

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2009 Mississippi Curriculum Framework: Postsecondary Court Reporting Technology. (Program CIP: 22.0303 - Court Reporting/Court Reporter)

ERIC Educational Resources Information Center

Adams, Geanell

2009-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2007 Mississippi Curriculum Framework: Postsecondary Small Engine and Turf Equipment Repair Technology. (Program CIP: 01.0299 Agricultural Mechanization, Other )

ERIC Educational Resources Information Center

Spence, Allen; Campus, Raymond

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Imaging-based optical caliper for objects in hot manufacturing processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Howard

OG Technologies, Inc. (OGT), in conjunction with its industrial and academic partners, proposes to develop an Imaging-Based Optical Caliper (hereafter referred to as OC) for Objects in Hot Manufacturing Processes. The goal is to develop and demonstrate the OC with the synergy of OGT's current technological pool and other innovations to provide a light weight, robust, safe and accurate portable dimensional measurement device for hot objects with integrated wireless communication capacity to enable real time process control. The technical areas of interest in this project are the combination of advanced imaging, Sensor Fusion, and process control. OGT believes that themore » synergistic interactions between its current set of technologies and other innovations could deliver products that are viable and have high impact in the hot manufacture processes, such as steel making, steel rolling, open die forging, and glass industries, resulting in a new energy efficient control paradigm in the operations through improved yield, prolonged tool life and improved quality. In-line dimension measurement and control is of interest to the steel makers, yet current industry focus is on the final product dimension only instead of whole process due to the limit of man power, system cost and operator safety concerns. As sensor technologies advances, the industry started to see the need to enforce better dimensional control throughout the process, but lack the proper tools to do so. OGT along with its industrial partners represent the indigenous effort of technological development to serve the US steel industry. The immediate market that can use and get benefited from the proposed OC is the Steel Industry. The deployment of the OC has the potential to provide benefits in reduction of energy waste, CO2 emission, waste water amount, toxic waste, and so forth. The potential market after further expended function includes Hot Forging and Freight Industries. The OC prototypes were fabricated, and were progressively tested on-site in several steel mill and hot forging facilities for evaluation. Software refinements and new calibration procedures were also carried out to overcome the discovered glitches. Progress was presented to the hot manufacture facilities worldwide. Evidence showed a great interest and practical need for this product. OGT is in the pilot commercialization mode for this new development. The R&D team also successfully developed a 3D measurement function with no additional investment of hardware or equipment to measure low or room temperature object dimensions. Several tests were conducted in the reality environment to evaluate the measurement results. This new application will require additional development in product design.« less

NASA Technology Applications Team: Commercial applications of aerospace technology

NASA Technical Reports Server (NTRS)

1994-01-01

The Research Triangle Institute (RTI) is pleased to report the results of NASA contract NASW-4367, 'Operation of a Technology Applications Team'. Through a period of significant change within NASA, the RTI Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. RTI's ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed an implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs; (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology; and (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

The Saudi Arabia Food and Drug Authority: An Evaluation of the Registration Process and Good Review Practices in Saudi Arabia in Comparison with Australia, Canada and Singapore.

PubMed

Hashan, Hajed; Aljuffali, Ibrahim; Patel, Prisha; Walker, Stuart

This study compares the current regulatory review process and good review practices at the Saudi Food and Drug Authority (SFDA) with those of regulatory agencies in Australia, Canada, and Singapore and identifies opportunities for developing the SFDA as a Regional Centre of Excellence. A questionnaire completed by the SFDA included data regarding the organisation, key milestones, review timelines, and good review practices of the agency. Similar information was obtained within the same timeframe (2014/2015) through the same standard questionnaire regarding the processes and practices for Health Canada, Singapore's Health Sciences Authority, and Australia's Therapeutic Goods Administration. All four regulatory agencies have established target times for scientific assessment and regulatory review, examine dossier sections in parallel, and separate company response time from overall timing. Additionally, all four agencies have instituted good review practices including standard operating procedures, templates, dossier monitoring, and continuous improvement processes, and assign a high priority to transparency in their relationships with the public, healthcare professionals and industry. Of the four agencies, however, only the SFDA requires a Certificate of Pharmaceutical Product (CPP) at the time of the submission and pricing negotiations before final product approval. To assist the SFDA in its efforts to become a Regional Centre of Excellence, it is suggested that the agency explore a risk stratification approach to select dossiers for verification, abridged, or full reviews; use forms of certification other than the CPP; make pricing negotiations independent to the review process; and introduce a feedback process for the quality of the dossier.

A house divided: cooperative and competitive recruitment in vital industries.

PubMed

Willis, William K; Muslin, Ivan; Timko, Karlyn N

2016-03-01

To propose a theoretical based model approach to address the nursing shortage problem of recruiting qualified applicants. Vital industries such as nursing and trucking face a large labour shortage. A literature review focusing on recruitment and realistic job previews examines relevant theories and an indication of the focus of similar research. Game theory illustrates cooperative and competitive recruitment strategies in vital industries. Proposition and model development where cooperative or competitive strategies for recruitment can either increase or decrease the employee applicant pool. Institutional theory states that firms within a population become isomorphic in nature. Firms employing cooperative or competitive strategies for recruitment can change organisational practices through isomorphic processes. Industries facing a labour market shortage using cooperative strategy will use realistic job previews accurately to disseminate information about industry jobs. Realistic job previews will increase the applicant pool through individuals self-selecting into, rather than out of, the applicant pool. Recruitment in the nursing industry has been examined at the individual applicant and organisational level, yet the overall industry has been ignored. As nursing shortages continue, viewing recruitment at the macro level (the overall industry) is appropriate. Game theory as proposed provides opportunities for current research at the industry level. © 2015 John Wiley & Sons Ltd.

On the reliability of Shewhart-type control charts for multivariate process variability

NASA Astrophysics Data System (ADS)

Djauhari, Maman A.; Salleh, Rohayu Mohd; Zolkeply, Zunnaaim; Li, Lee Siaw

2017-05-01

We show that in the current practice of multivariate process variability monitoring, the reliability of Shewhart-type control charts cannot be measured except when the sub-group size n tends to infinity. However, the requirement of large n is meaningless not only in manufacturing industry where n is small but also in service industry where n is moderate. In this paper, we introduce a new definition of control limits in the two most appreciated control charts in the literature, i.e., the improved generalized variance chart (IGV-chart) and vector variance chart (VV-chart). With the new definition of control limits, the reliability of the control charts can be determined. Some important properties of new control limits will be derived and the computational technique of probability of false alarm will be delivered.

Process-time Optimization of Vacuum Degassing Using a Genetic Alloy Design Approach

PubMed Central

Dilner, David; Lu, Qi; Mao, Huahai; Xu, Wei; van der Zwaag, Sybrand; Selleby, Malin

2014-01-01

This paper demonstrates the use of a new model consisting of a genetic algorithm in combination with thermodynamic calculations and analytical process models to minimize the processing time during a vacuum degassing treatment of liquid steel. The model sets multiple simultaneous targets for final S, N, O, Si and Al levels and uses the total slag mass, the slag composition, the steel composition and the start temperature as optimization variables. The predicted optimal conditions agree well with industrial practice. For those conditions leading to the shortest process time the target compositions for S, N and O are reached almost simultaneously. PMID:28788286

Lessons learned in transitioning to an open systems environment

NASA Technical Reports Server (NTRS)

Boland, Dillard E.; Green, David S.; Steger, Warren L.

1994-01-01

Software development organizations, both commercial and governmental, are undergoing rapid change spurred by developments in the computing industry. To stay competitive, these organizations must adopt new technologies, skills, and practices quickly. Yet even for an organization with a well-developed set of software engineering models and processes, transitioning to a new technology can be expensive and risky. Current industry trends are leading away from traditional mainframe environments and toward the workstation-based, open systems world. This paper presents the experiences of software engineers on three recent projects that pioneered open systems development for NASA's Flight Dynamics Division of the Goddard Space Flight Center (GSFC).

Elimination of micropollutants and hazardous substances at the source in the chemical and pharmaceutical industry.

PubMed

Blöcher, C

2007-01-01

Industrial wastewater, especially from chemical and pharmaceutical production, often contains substances that need to be eliminated before being discharged into a biological treatment plant and following water bodies. This can be done within the production itself, in selected waste water streams or in a central treatment plant. Each of these approaches has certain advantages and disadvantages. Furthermore, a variety of wastewater treatment processes exist that can be applied at each stage, making it a challenging task to choose the best one in economic and ecological terms. In this work a general approach for that and examples from practice are discussed.

Public Health Campaigns to Change Industry Practices that Damage Health: An Analysis of 12 Case Studies

ERIC Educational Resources Information Center

Freudenberg, Nicholas; Picard Bradley, Sarah; Serrano, Monica

2009-01-01

Industry practices such as advertising, production of unsafe products, and efforts to defeat health legislation play a major role in current patterns of U.S. ill health. Changing these practices may be a promising strategy to promote health. The authors analyze 12 campaigns designed to modify the health-related practices of U.S. corporations in…

Cosmetic surgical practice: are we complying with professional standards?

PubMed

Kearney, L; de Blacam, C; Clover, A J; Kelly, E J; O'Shaughnessy, M; O'Sullivan, S T; O'Broin, E

2015-06-01

Aesthetic surgery is a rapidly expanding industry and patient safety is a fundamental issue. The need for regulation has been outlined by the Professional Standards for Cosmetic Practice Report, published by the Royal College of Surgeons in January 2013 which highlighted standards of patient care. The aim of this study was to review institutional compliance with these standards. A retrospective chart review of 40 consecutive patients who underwent either bilateral breast augmentation or bilateral breast reduction between November 2012 and November 2013 within our unit was performed. Compliance with standards relating to practice management, patient consultation, patient communication and record-keeping was examined. While details of past medical history were recorded in most cases, few consultations referred to psychiatric history and cosmetic surgical history specifically. Perioperative documentation and compliance with surgical safety processes were excellent. As a self-regulating profession, it is important that plastic surgeons take the lead in auditing their practice against such published standards. We urge all professionals who carry out cosmetic procedures to regularly review their practice, thereby promoting accountability and maintaining the trust of the general public in the aesthetic surgery industry. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Best practices of Building Information Modelling (BIM) implementation in design phase for construction project

NASA Astrophysics Data System (ADS)

Kasim, N.; Zainal Abidin, N. A.; Zainal, R.; Sarpin, N.; Rahim, M. H. I. Abd; Saikah, M.

2017-11-01

Implementation of Building Information Modelling (BIM) was expected to bring improvement in current practices of Malaysian construction industry. In the design phase, there is a lack of a ready pool of skilled workers who are able to develop BIM strategic plan and effectively utilise it. These create boundaries for BIM nature in Malaysian construction industry specifically in the design phase to achieve its best practices. Therefore, the objectives of this research are to investigate the current practices of BIM implementation in the design phase as well as the best practices factors of BIM implementation in the design phase. The qualitative research approach is carried out through semi-structured interviews with the designers of different organisations which adopt BIM in the design phase. Data collection is analysed by executing content analysis method. From the findings, the best practices factors of BIM implementation in design phase such as the incentive for BIM training, formal approach to monitoring automated Level of Detailing (LOD), run a virtual meeting and improve Industry Foundation Class (IFC). Thus, best practices factors which lead to practices improvements in the design phase of project development which subsequently improves the implementation of BIM in the design phase of Malaysian construction industry.

Non-compliance with the International Code of Marketing of Breast Milk Substitutes is not confined to the infant formula industry.

PubMed

Forsyth, Stewart

2013-06-01

Infant feeding policy and practice continues to be a contentious area of global health care. The infant formula industry is widely considered to be the bête noire with frequent claims that they adopt marketing and sales practices that are not compliant with the WHO Code. However, failure to resolve these issues over three decades suggests that there may be wider systemic failings. Review of published papers, commentaries and reports relating to the implementation and governance of the WHO Code with specific reference to issues of non-compliance. The analysis set out in this paper indicates that there are systemic failings at all levels of the implementation and monitoring process including the failure of WHO to successfully 'urge' governments to implement the Code in its entirety; a lack of political will by Member States to implement and monitor the Code and a lack of formal and transparent governance structures. Non-compliance with the WHO Code is not confined to the infant formula industry and several actions are identified, including the need to address issues of partnership working and the establishment of governance systems that are robust, independent and transparent.

Thermodynamic analysis of a possible CO{sub 2}-laser plant included in a heat engine cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bisio, G.; Rubatto, G.

1998-07-01

In these last years, several plants have been realized in some industrialized countries to recover pressure exergy from various fluids. That has been done by means of suitable turbines in particular for blast-furnace top gas and natural gas. Various papers have examined the topic, considering pros and cons. High-power CO{sub 2}-lasers are being more and more widely used for welding, drilling and cutting in machine shops. In the near future different kinds of metal surface treatments will probably become routine practice with laser units. The industries benefiting most from high power lasers will be: the automotive industry, shipbuilding, the offshoremore » industry, the aerospace industry, the nuclear and the chemical processing industries. Both degradation and cooling problems may be alleviated by allowing the gas to flow through the laser tube and by reducing its pressure outside this tube. Thus, a thermodynamic analysis on high-power CO{sub 2}-lasers with particular reference to a possible energy recovery is justified. In previous papers the critical examination of the concept of efficiency has led one of the present authors to the definition of an operational domain in which the process can be achieved. This domain is confined by regions of no entropy production (upper limit) and no useful effects (lower limit). On the basis of these concepts and of what has been done for pressure exergy recovery from other fluids, exergy investigations and an analysis of losses are performed for a cyclic process including a high performance CO2 laser. Thermodynamic analysis of flow processes in a CO{sub 2}-laser plant shows that the inclusion of a turbine in this plant allows us to recover the most part of the exergy necessary for the compressor; in addition, the water consumption for the refrigeration in the heat exchanger is reduced.« less

eHealth and IMIA's Strategic Planning Process - IMIA conference introductory address.

PubMed

Murray, Peter; Haux, Reinhold; Lorenzi, Nancy

2008-01-01

The International Medical Informatics Association (IMIA) is the only organization in health and biomedical informatics which is fully international in scope, bridging the academic, health practice, education, and health industry worlds through conferences, working groups, special interest groups and publications. Authored by the IMIA Interim Vice President for Strategic Planning Implementation and co-authored by the current IMIA President and the IMIA Past-President, the intention of this paper is to introduce IMIA's current strategic planning process and to set this process in relation to 'eHealth: Combining Health Telematics, Telemedicine, Biomedical Engineering and Bioinformatics to the Edge', the theme of this conference. From the viewpoint of an international organization such as IMIA, an eHealth strategy needs to be considered in a comprehensive way, including broadly stimulating high-quality health and biomedical informatics research and education, as well as providing support to bridging outcomes towards a new practice of health care in a changing world.

Analytical solutions for coagulation and condensation kinetics of composite particles

NASA Astrophysics Data System (ADS)

Piskunov, Vladimir N.

2013-04-01

The processes of composite particles formation consisting of a mixture of different materials are essential for many practical problems: for analysis of the consequences of accidental releases in atmosphere; for simulation of precipitation formation in clouds; for description of multi-phase processes in chemical reactors and industrial facilities. Computer codes developed for numerical simulation of these processes require optimization of computational methods and verification of numerical programs. Kinetic equations of composite particle formation are given in this work in a concise form (impurity integrated). Coagulation, condensation and external sources associated with nucleation are taken into account. Analytical solutions were obtained in a number of model cases. The general laws for fraction redistribution of impurities were defined. The results can be applied to develop numerical algorithms considerably reducing the simulation effort, as well as to verify the numerical programs for calculation of the formation kinetics of composite particles in the problems of practical importance.

Competition preparation guideline in undergraduate program of information system school of Industrial Engineering Telkom University based on knowledge conversion

NASA Astrophysics Data System (ADS)

Darmawan, F. R.; Soesanto, R. P.; Kurniawati, A.; Kurniawan, M. T.

2017-12-01

The role of higher education in the development of science and technology is not only from the contribution of the high-quality alumni but also from the research and relevant competition with the needs of development in such a country. In a competition, the student can improve their soft skill and academic skill such as analytical and critical thinking, communication skills and mental. The number of relevant competition by students is also included in accreditation clause, therefore student involvement in competition is seen as important for the undergraduate program in University. The most problem in university is the high turnover from the student. Bachelor program in Indonesia usually takes 4 years to complete, and the high turnover causes the student come and go as they are a graduate from the institution without preserving the knowledge and experience from the competition to other students. This research aims to develop a guidance for competition preparation in the university by using knowledge conversion. The object of this research is an information system undergraduate program in the school of industrial engineering Telkom University. The best practice selection is done by using factor rating method. Delphi method is used to identify the criteria, and AHP method is used to calculate the weight of each criterion. From the factor rating result it is known that from 3 respondent, best practice from respondent A (7.321) is used for preparing the programming competition in an undergraduate program of information system in the school of industrial engineering Telkom University. FGD is done to disseminate the selected best practice into the process stakeholder which is head of the student affair of the school of industrial engineering, students, and laboratory assistants. Future research can be done to create more comprehensive criteria for selecting the best practice.

Exploring the Role of Usability in the Software Process: A Study of Irish Software SMEs

NASA Astrophysics Data System (ADS)

O'Connor, Rory V.

This paper explores the software processes and usability techniques used by Small and Medium Enterprises (SMEs) that develop web applications. The significance of this research is that it looks at development processes used by SMEs in order to assess to what degree usability is integrated into the process. This study seeks to gain an understanding into the level of awareness of usability within SMEs today and their commitment to usability in practice. The motivation for this research is to explore the current development processes used by SMEs in developing web applications and to understand how usability is represented in those processes. The background for this research is provided by the growth of the web application industry beyond informational web sites to more sophisticated applications delivering a broad range of functionality. This paper presents an analysis of the practices of several Irish SMEs that develop web applications through a series of case studies. With the focus on SMEs that develop web applications as Management Information Systems and not E-Commerce sites, informational sites, online communities or web portals. This study gathered data about the usability techniques practiced by these companies and their awareness of usability in the context of the software process in those SMEs. The contribution of this study is to further the understanding of the current role of usability within the software development processes of SMEs that develop web applications.

Design of high reliability organizations in health care.

PubMed

Carroll, J S; Rudolph, J W

2006-12-01

To improve safety performance, many healthcare organizations have sought to emulate high reliability organizations from industries such as nuclear power, chemical processing, and military operations. We outline high reliability design principles for healthcare organizations including both the formal structures and the informal practices that complement those structures. A stage model of organizational structures and practices, moving from local autonomy to formal controls to open inquiry to deep self-understanding, is used to illustrate typical challenges and design possibilities at each stage. We suggest how organizations can use the concepts and examples presented to increase their capacity to self-design for safety and reliability.

Managing Space System Faults: Coalescing NASA's Views

NASA Technical Reports Server (NTRS)

Muirhead, Brian; Fesq, Lorraine

2012-01-01

Managing faults and their resultant failures is a fundamental and critical part of developing and operating aerospace systems. Yet, recent studies have shown that the engineering "discipline" required to manage faults is not widely recognized nor evenly practiced within the NASA community. Attempts to simply name this discipline in recent years has been fraught with controversy among members of the Integrated Systems Health Management (ISHM), Fault Management (FM), Fault Protection (FP), Hazard Analysis (HA), and Aborts communities. Approaches to managing space system faults typically are unique to each organization, with little commonality in the architectures, processes and practices across the industry.

Implications of domestic food practices for the presence of bioactive components in meats with special reference to meat-based functional foods.

PubMed

Jiménez-Colmenero, Francisco; Cofrades, Susana; Herrero, Ana M; Ruiz-Capillas, Claudia

2017-06-14

Although an essential component of the diet, the consumption of meat is in question. Meat is a major source of beneficial compounds but it also contains other substances with negative health implications. Functional foods, which are leading trends in the food industry, constitute an excellent opportunity for the meat sector to improve healthier meat options. Most studies on meat-based functional foods have focused mainly on the application of different strategies (animal production practices and meat transformation systems) to improve (increase/reduce) the presence of bioactive (healthy/unhealthy) compounds; these have led to the development of numerous products, many of them by the meat industry. However, like other foods, after purchase meats undergo certain processes before they are consumed, and these affect their composition. Although domestic handling practices can significantly alter the make-up of the marketed product in terms of healthy/unhealthy compounds, there are very few studies on their consequences. This paper provides an overview of the influence of different domestic practices (from shopping to eating) habitually followed by consumers on the presence of, and consequently on the levels of exposure to, (healthy and unhealthy) food components associated with the consumption of meats, with special reference to meat-based functional foods.

Application of gamma-ray spectrometry in a NORM industry for its radiometrical characterization

NASA Astrophysics Data System (ADS)

Mantero, J.; Gázquez, M. J.; Hurtado, S.; Bolívar, J. P.; García-Tenorio, R.

2015-11-01

Industrial activities involving Naturally Occurring Radioactive Materials (NORM) are found among the most important industrial sectors worldwide as oil/gas facilities, metal production, phosphate Industry, zircon treatment, etc. being really significant the radioactive characterization of the materials involved in their production processes in order to assess the potential radiological risk for workers or natural environment. High resolution gamma spectrometry is a versatile non-destructive radiometric technique that makes simultaneous determination of several radionuclides possible with little sample preparation. However NORM samples cover a wide variety of densities and composition, as opposed to the standards used in gamma efficiency calibration, which are either water-based solutions or standard/reference sources of similar composition. For that reason self-absorption correction effects (especially in the low energy range) must be considered individually in every sample. In this work an experimental and a semi-empirical methodology of self-absorption correction were applied to NORM samples, and the obtained results compared critically, in order to establish the best practice in relation to the circumstances of an individual laboratory. This methodology was applied in samples coming from a TiO2 factory (NORM industry) located in the south-west of Spain where activity concentration of several radionuclides from the Uranium and Thorium series through the production process was measured. These results will be shown in this work.

Japanese plums (Prunus salicina Lindl.) and phytochemicals--breeding, horticultural practice, postharvest storage, processing and bioactivity.

PubMed

Fanning, Kent J; Topp, Bruce; Russell, Dougal; Stanley, Roger; Netzel, Michael

2014-08-01

Previous reviews of plum phytochemical content and health benefits have concentrated on the European plum, Prunus domestica L. However, the potential bioactivity of red- and dark red-fleshed Japanese plums, Prunus salicina Lindl., so-called blood plums, appears to warrant a significant increase in exposure, as indicated in a recent review of the whole Prunus genus. Furthermore, Japanese plums are the predominant plum produced on an international basis. In this review the nutrient and phytochemical content, breeding, horticultural practice, postharvest treatment and processing as well as bioactivity (emphasising in vivo studies) of Japanese plum are considered, with a focus on the anthocyanin content that distinguishes the blood plums. © 2014 State of Queensland Journal of the Science of Food and Agriculture © 2014 Society of Chemical Industry.

A practical method of determining water current velocities and diffusion coefficients in coastal waters by remote sensing techniques

NASA Technical Reports Server (NTRS)

James, W. P.

1971-01-01

A simplified procedure is presented for determining water current velocities and diffusion coefficients. Dye drops which form dye patches in the receiving water are made from an aircraft. The changes in position and size of the patches are recorded from two flights over the area. The simplified data processing procedure requires only that the ground coordinates about the dye patches be determined at the time of each flight. With an automatic recording coordinatograph for measuring coordinates and a computer for processing the data, this technique provides a practical method of determining circulation patterns and mixing characteristics of large aquatic systems. This information is useful in assessing the environmental impact of waste water discharges and for industrial plant siting.

Ethylene Formation by Catalytic Dehydration of Ethanol with Industrial Considerations.

PubMed

Fan, Denise; Dai, Der-Jong; Wu, Ho-Shing

2012-12-28

Ethylene is the primary component in most plastics, making it economically valuable. It is produced primarily by steam-cracking of hydrocarbons, but can alternatively be produced by the dehydration of ethanol, which can be produced from fermentation processes using renewable substrates such as glucose, starch and others. Due to rising oil prices, researchers now look at alternative reactions to produce green ethylene, but the process is far from being as economically competitive as using fossil fuels. Many studies have investigated catalysts and new reaction engineering technologies to increase ethylene yield and to lower reaction temperature, in an effort to make the reaction applicable in industry and most cost-efficient. This paper presents various lab synthesized catalysts, reaction conditions, and reactor technologies that achieved high ethylene yield at reasonable reaction temperatures, and evaluates their practicality in industrial application in comparison with steam-cracking plants. The most promising were found to be a nanoscale catalyst HZSM-5 with 99.7% ethylene selectivity at 240 °C and 630 h lifespan, using a microreactor technology with mechanical vapor recompression, and algae-produced ethanol to make ethylene.

Assessing Health Impacts within Environmental Impact Assessments: An Opportunity for Public Health Globally Which Must Not Remain Missed

PubMed Central

Harris, Patrick; Viliani, Francesca; Spickett, Jeff

2015-01-01

Within the member states of the United Nations 190 of 193 have regulated Environmental Impact Assessments (EIA) which is a systematic process to prevent and mitigate the potential environmental impacts of industry development projects before these occur. However, the routine and comprehensive assessment of health impacts within EIAs remains underdeveloped. Focusing, as an example, on the risks to global health from the global shift in the mining industry towards Low and Middle Income Countries LMIC), this viewpoint details why connecting with EIA is an essential task for the health system. Although existing knowledge is out of date in relation to global practice we identify how health has been included, to some extent, in High Income Country EIAs and the institutional requirements for doing so. Using arguments identified by industry themselves about requiring a ‘social license to operate’, we conclude that EIA regulations provide the best current mechanism to ensure health protection is a core aspect in the decision making process to approve projects. PMID:25608592

A historical review of additives and modifiers used in paving asphalt refining processes in the United States.

PubMed

Mundt, Diane J; Adams, Robert C; Marano, Kristin M

2009-11-01

The U.S. asphalt paving industry has evolved over time to meet various performance specifications for liquid petroleum asphalt binder (known as bitumen outside the United States). Additives to liquid petroleum asphalt produced in the refinery may affect exposures to workers in the hot mix paving industry. This investigation documented the changes in the composition and distribution of the liquid petroleum asphalt products produced from petroleum refining in the United States since World War II. This assessment was accomplished by reviewing documents and interviewing individual experts in the industry to identify current and historical practices. Individuals from 18 facilities were surveyed; the number of facilities reporting use of any material within a particular class ranged from none to more than half the respondents. Materials such as products of the process stream, polymers, elastomers, and anti-strip compounds have been added to liquid petroleum asphalt in the United States over the past 50 years, but modification has not been generally consistent by geography or time. Modifications made to liquid petroleum asphalt were made generally to improve performance and were dictated by state specifications.

Modeling Energy Efficiency As A Green Logistics Component In Vehicle Assembly Line

NASA Astrophysics Data System (ADS)

Oumer, Abduaziz; Mekbib Atnaw, Samson; Kie Cheng, Jack; Singh, Lakveer

2016-11-01

This paper uses System Dynamics (SD) simulation to investigate the concept green logistics in terms of energy efficiency in automotive industry. The car manufacturing industry is considered to be one of the highest energy consuming industries. An efficient decision making model is proposed that capture the impacts of strategic decisions on energy consumption and environmental sustainability. The sources of energy considered in this research are electricity and fuel; which are the two main types of energy sources used in a typical vehicle assembly plant. The model depicts the performance measurement for process- specific energy measures of painting, welding, and assembling processes. SD is the chosen simulation method and the main green logistics issues considered are Carbon Dioxide (CO2) emission and energy utilization. The model will assist decision makers acquire an in-depth understanding of relationship between high level planning and low level operation activities on production, environmental impacts and costs associated. The results of the SD model signify the existence of positive trade-offs between green practices of energy efficiency and the reduction of CO2 emission.

Scientific and educational center "space systems and technology"

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Loginov, Y. Y.; Zelenkov, P. V.

2015-10-01

The issues of engineers training in the aerospace university on the base of Scientific and Educational Center "Space Systems and Technology" are discussed. In order to improve the quality of education in the Siberian State Aerospace University the research work of students, as well as the practice- oriented training of engineers are introduced in the educational process. It was made possible as a result of joint efforts of university with research institutes of the Russian Academy of Science and industrial enterprises. The university experience in this area promotes the development of a new methods and forms of educational activities, including the project-oriented learning technologies, identifying promising areas of specialization and training of highly skilled engineers for aerospace industry and other institutions. It also allows you to coordinate the work of departments and other units of the university to provide the educational process in workshops and departments of the industrial enterprises in accordance with the needs of the target training. Within the framework of scientific and education center the students perform researches, diploma works and master's theses; the postgraduates are trained in advanced scientific and technical areas of enterprise development.

NORM management in the oil and gas industry.

PubMed

Cowie, M; Mously, K; Fageeha, O; Nassar, R

2012-01-01

It has been established that naturally occurring radioactive material (NORM) may accumulate at various locations along the oil and gas production process. Components such as wellheads, separation vessels, pumps, and other processing equipment can become contaminated with NORM, and NORM can accumulate in the form of sludge, scale, scrapings, and other waste media. This can create a potential radiation hazard to workers, the general public, and the environment if certain controls are not established. Saudi Aramco has developed NORM management guidelines, and is implementing a comprehensive strategy to address all aspects of NORM management that aim to enhance NORM monitoring; control of NORM-contaminated equipment; control of NORM waste handling and disposal; and protection, awareness, and training of workers. The benefits of shared knowledge, best practice, and experience across the oil and gas industry are seen as key to the establishment of common guidance. This paper outlines Saudi Aramco's experience in the development of a NORM management strategy, and its goals of establishing common guidance throughout the oil and gas industry. Copyright © 2012. Published by Elsevier Ltd.

Assessing efficiency and effectiveness of Malaysian Islamic banks: A two stage DEA analysis

NASA Astrophysics Data System (ADS)

Kamarudin, Norbaizura; Ismail, Wan Rosmanira; Mohd, Muhammad Azri

2014-06-01

Islamic banks in Malaysia are indispensable players in the financial industry with the growing needs for syariah compliance system. In the banking industry, most recent studies concerned only on operational efficiency. However rarely on the operational effectiveness. Since the production process of banking industry can be described as a two-stage process, two-stage Data Envelopment Analysis (DEA) can be applied to measure the bank performance. This study was designed to measure the overall performance in terms of efficiency and effectiveness of Islamic banks in Malaysia using Two-Stage DEA approach. This paper presents analysis of a DEA model which split the efficiency and effectiveness in order to evaluate the performance of ten selected Islamic Banks in Malaysia for the financial year period ended 2011. The analysis shows average efficient score is more than average effectiveness score thus we can say that Malaysian Islamic banks were more efficient rather than effective. Furthermore, none of the bank exhibit best practice in both stages as we can say that a bank with better efficiency does not always mean having better effectiveness at the same time.

Ethylene Formation by Catalytic Dehydration of Ethanol with Industrial Considerations

PubMed Central

Fan, Denise; Dai, Der-Jong; Wu, Ho-Shing

2012-01-01

Ethylene is the primary component in most plastics, making it economically valuable. It is produced primarily by steam-cracking of hydrocarbons, but can alternatively be produced by the dehydration of ethanol, which can be produced from fermentation processes using renewable substrates such as glucose, starch and others. Due to rising oil prices, researchers now look at alternative reactions to produce green ethylene, but the process is far from being as economically competitive as using fossil fuels. Many studies have investigated catalysts and new reaction engineering technologies to increase ethylene yield and to lower reaction temperature, in an effort to make the reaction applicable in industry and most cost-efficient. This paper presents various lab synthesized catalysts, reaction conditions, and reactor technologies that achieved high ethylene yield at reasonable reaction temperatures, and evaluates their practicality in industrial application in comparison with steam-cracking plants. The most promising were found to be a nanoscale catalyst HZSM-5 with 99.7% ethylene selectivity at 240 °C and 630 h lifespan, using a microreactor technology with mechanical vapor recompression, and algae-produced ethanol to make ethylene. PMID:28809297

View from the top: CEO perspectives on executive development and succession planning practices in healthcare organizations.

PubMed

Groves, Kevin S

2006-01-01

Many healthcare professionals question whether the industry's hospitals and multi-site systems are implementing the necessary executive development and succession planning systems to ensure that high potential managers are prepared and aptly selected to assume key executive roles. Survey data, case studies, and cross-industry comparisons suggest that healthcare organizations may face a leadership crisis as the current generation of chief executive officers (CEOs) nears retirement while traditional means of developing the leadership pipeline, including middle-management positions and graduate programs requiring formal residencies, continue to dissipate. Given the daunting challenges that accompany the healthcare industry's quest to identify, develop, and retain leadership talent, this article provides best practice findings from a qualitative study of 13 healthcare organizations with a record of exemplary executive development and succession planning practices. CEOs from six single-site hospitals, six healthcare systems, and one medical group were interviewed to identify industry best practices so that healthcare practitioners and educators may utilize the findings to enhance the industry's leadership capacity.

Emergy-based comparative analysis on industrial clusters: economic and technological development zone of Shenyang area, China.

PubMed

Liu, Zhe; Geng, Yong; Zhang, Pan; Dong, Huijuan; Liu, Zuoxi

2014-09-01

In China, local governments of many areas prefer to give priority to the development of heavy industrial clusters in pursuit of high value of gross domestic production (GDP) growth to get political achievements, which usually results in higher costs from ecological degradation and environmental pollution. Therefore, effective methods and reasonable evaluation system are urgently needed to evaluate the overall efficiency of industrial clusters. Emergy methods links economic and ecological systems together, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. This method has been successfully applied in many case studies of ecosystem but seldom in industrial clusters. This study applied the methodology of emergy analysis to perform the efficiency of industrial clusters through a series of emergy-based indices as well as the proposed indicators. A case study of Shenyang Economic Technological Development Area (SETDA) was investigated to show the emergy method's practical potential to evaluate industrial clusters to inform environmental policy making. The results of our study showed that the industrial cluster of electric equipment and electronic manufacturing produced the most economic value and had the highest efficiency of energy utilization among the four industrial clusters. However, the sustainability index of the industrial cluster of food and beverage processing was better than the other industrial clusters.

Microchannel Reactor System for Catalytic Hydrogenation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adeniyi Lawal; Woo Lee; Ron Besser

2010-12-22

We successfully demonstrated a novel process intensification concept enabled by the development of microchannel reactors, for energy efficient catalytic hydrogenation reactions at moderate temperature, and pressure, and low solvent levels. We designed, fabricated, evaluated, and optimized a laboratory-scale microchannel reactor system for hydrogenation of onitroanisole and a proprietary BMS molecule. In the second phase of the program, as a prelude to full-scale commercialization, we designed and developed a fully-automated skid-mounted multichannel microreactor pilot plant system for multiphase reactions. The system is capable of processing 1 – 10 kg/h of liquid substrate, and an industrially relevant immiscible liquid-liquid was successfully demonstratedmore » on the system. Our microreactor-based pilot plant is one-of-akind. We anticipate that this process intensification concept, if successfully demonstrated, will provide a paradigm-changing basis for replacing existing energy inefficient, cost ineffective, environmentally detrimental slurry semi-batch reactor-based manufacturing practiced in the pharmaceutical and fine chemicals industries.« less

Agricultural anaerobic digestion power plants in Ireland and Germany: policy and practice.

PubMed

Auer, Agathe; Vande Burgt, Nathan H; Abram, Florence; Barry, Gerald; Fenton, Owen; Markey, Bryan K; Nolan, Stephen; Richards, Karl; Bolton, Declan; De Waal, Theo; Gordon, Stephen V; O'Flaherty, Vincent; Whyte, Paul; Zintl, Annetta

2017-02-01

The process of anaerobic digestion (AD) is valued as a carbon-neutral energy source, while simultaneously treating organic waste, making it safer for disposal or use as a fertilizer on agricultural land. The AD process in many European nations, such as Germany, has grown from use of small, localized digesters to the operation of large-scale treatment facilities, which contribute significantly to national renewable energy quotas. However, these large AD plants are costly to run and demand intensive farming of energy crops for feedstock. Current policy in Germany has transitioned to support funding for smaller digesters, while also limiting the use of energy crops. AD within Ireland, as a new technology, is affected by ambiguous governmental policies concerning waste and energy. A clear governmental strategy supporting on-site AD processing of agricultural waste will significantly reduce Ireland's carbon footprint, improve the safety and bioavailability of agricultural waste, and provide an indigenous renewable energy source. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Inhibitory effect of microwaved thinned nectarine extracts on polyphenol oxidase activity.

PubMed

Redondo, Diego; Venturini, María E; Oria, Rosa; Arias, Esther

2016-04-15

By-products from agricultural practices or from the fruit processing industry are a source of bioactive compounds that could be used in the food industry. Such by-products include thinned fruits, which are expected to contain high quantities of interesting compounds. One possible application of this fruits is the prevention of the enzymatic browning suffered by fruits and vegetables after minimal processing. The aim of this study is to determine the in vitro and in vivo activity of microwaved extracts obtained from thinned nectarines. It has been observed that in vitro the extracts obtained after the application of high microwave power levels (500, 1000 and 1500 W) are mixed type inhibitors of polyphenoloxidase enzyme, showing an irreversible inactivation. This inhibition could be attributed to the Maillard reaction products formed during the microwave treatment. In vivo, a solution of 2% of the extract obtained at 1500 W inhibited the enzymatic browning in minimally processed peaches for 8 days of storage. Copyright © 2015 Elsevier Ltd. All rights reserved.

Exploring opportunities for collaboration between the corporate sector and the dental education community.

PubMed

Alexander, D; Clarkson, J; Buchanan, R; Chadwick, G; Chesters, R; Drisko, C L; Douglass, C W; Farrell, L; Fletcher, K; Makoni, F; Monaco, M; Nordquist, B; Park, N I; Riggs, S; Schou, L; Smales, F C; Stamm, J W; Toh, C G; Volpe, T; Ward, P; Warren, P

2008-02-01

The ultimate purpose of both dental industry and dental education is to improve the oral health of the public. This report provides background information on the different roles and objectives of the dental industry and dental education communities, the different operating environment of each sector and also areas of common interest where collaboration will be of mutual benefit. The report addresses five areas for potential collaboration between the dental industry and the dental education communities: 1. Contribution to joint activities. 2. Effectiveness and efficiency. 3. Workforce needs. 4. Middle- and low-income countries. 5. The future of International Federation of Dental Educators and Associations (IFDEA). The traditional areas of support and their limitations that have been provided by industry are outlined in the report and some new approaches for collaboration are considered. Industry-based research has been an important factor in developing new products and technologies and in promoting oral health. However there is a need to facilitate the introduction of these developments at an early stage in the education process. Industry has to operate in an efficient manner to remain competitive and maximise its returns and therefore survive. The academic sector operates in a different environment and under different governance structures; although some trends are noted towards adoption of greater efficiency and financial accountability similar to industry. Opportunities to jointly develop best business practices should be explored. Industry has responded well to the oral health needs of the public through the development of new products and technologies. The education community needs to respond in a similar way by examining different healthcare delivery models worldwide and developing programmes to train members of the dental team to cater for future needs and demands of communities in different regions of the world. The reputation of industry-based scientists and clinicians is high, and their role in contributing to the dental education process in practical ways needs to be explored and further developed. Closer relationships between industry scientists and faculty and students could assist industrys need and desire to develop new technologies for the broader dental care system. The corporate sector can play a key role in the future success of IFDEA by providing support and expertise in developing areas such as regional leadership institutes, a Global Faculty and Network and in collaborating in developing continuing education programmes as well as involvement in its governance. Thirteen recommendations are made in the report. These are considered to be important initial steps in developing the already strong relationship between the education and corporate sectors. Partnership and collaborating more effectively along the lines suggested should, almost certainly, generate mutually beneficial outcomes, whilst serving over the long term to elevate the publics oral health status on a global basis.

What hinders implementation of the WHO FCTC Article 5.3? - The case of South Korea.

PubMed

Lee, Sungkyu

2016-10-01

The aims of this study are to identify what hinders implementation of the WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 in Korea, and to provide suggestions for the implementation of Article 5.3. Official governmental documents on tobacco control were reviewed. We also searched news articles for data triangulation. There were three factors that hindered the implementation of Article 5.3 in Korea. Firstly, there has been legal conflict between two tobacco-related laws, one of which is designed to promote the tobacco industry. The other is designed to promote public health. Secondly, the government has had economic interests in the tobacco industry, and its lack of action to effectively regulate the tobacco industry's corporate social responsibility (CSR) practices has hindered the implementation of Article 5.3. Thirdly, the tobacco industry's lobby and active interference in the policy-making process has been a barrier. To fully implement Article 5.3, this study suggests: defusing legal conflict between tobacco-related laws; not considering tobacco industry as a stakeholder; regulating tobacco industry's CSR activities; raising awareness of tobacco industry interference; securing transparency between the government and tobacco industry; and establishing a core group or a committee under the government to implement Article 5.3.

2007 Mississippi Curriculum Framework: Postsecondary Diagnostic Medical Sonography Technology. (Program CIP: 51.0910 - Diagnostic Medical Sonography/Sonographer and Ultrasound Technician)

ERIC Educational Resources Information Center

Larimore, Crystal; Megginson, Nita; Weekley, Tracy B.

2007-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Training Guide for the Management Analyst Industrial Engineer Technician

DTIC Science & Technology

1979-07-01

comtemporary work operations, and blending traditional and modern organization concepts, the student devwlops the facility to analyze and create organization...training, the attendee will know the functions of a computer as it processes business data to produce information for improved management. He will...action which is most cost effective when considering proposed investments. Emphasis is placed on the adaption of general business practices to

2005 Mississippi Curriculum Framework: Postsecondary Health Care Assistant. (Program CIP: 51.1614 - Nurse/Nursing Assistant/Aide and Client Care Assistant)

ERIC Educational Resources Information Center

Sims, Addie; Burch, Brenda; River, Jayne; Hull, Jennifer; Williams, Judy; Cross, Ella; Lowe, Pam

2005-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Health-Care Assistant. (Program CIP-51.3902 - Nurse/Nursing Assistant/Aide and Client Care Assistant)

ERIC Educational Resources Information Center

Jackson, Jennifer; Sims, Addie

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

The Effect of the Elimination of Micromotion and Tissue Strain on Intracortical Device Performance

DTIC Science & Technology

2016-10-01

promise for translation into the clinic. SMP-based probes are compatible with reliable manufacturing practices. 15. SUBJECT TERMS Intracortical probe...addition, the fabrication approaches used to create these test structures take advantage of industrial level manufacturing processes such that...Ravikumar et al. (2014) “The Effect of Residual Endotoxin Contamination on the Neuroinflammatory Response to Sterilized Intracortical Microelectrodes” J

Biotechnology, Industry Study, Spring 2009

DTIC Science & Technology

2009-01-01

roots to zymotechnology ( fermentation ), practiced by the Sumerians and Babylonians as early as 6,000 B.C.3 This core technology expanded to other...applications, including using yeast to make bread, bacteria to derive yogurt , and molds to make cheeses.4 Early biotechnology endeavors included...alcohol or ethanol. This first generation process uses the fermentation of sugars or starches to produce ethanol but is dependent upon corn, a

Strategies for Maximizing Successful Drug Substance Technology Transfer Using Engineering, Shake-Down, and Wet Test Runs.

PubMed

Abraham, Sushil; Bain, David; Bowers, John; Larivee, Victor; Leira, Francisco; Xie, Jasmina

2015-01-01

The technology transfer of biological products is a complex process requiring control of multiple unit operations and parameters to ensure product quality and process performance. To achieve product commercialization, the technology transfer sending unit must successfully transfer knowledge about both the product and the process to the receiving unit. A key strategy for maximizing successful scale-up and transfer efforts is the effective use of engineering and shake-down runs to confirm operational performance and product quality prior to embarking on good manufacturing practice runs such as process performance qualification runs. We consider key factors to consider in making the decision to perform shake-down or engineering runs. We also present industry benchmarking results of how engineering runs are used in drug substance technology transfers alongside the main themes and best practices that have emerged. Our goal is to provide companies with a framework for ensuring the "right first time" technology transfers with effective deployment of resources within increasingly aggressive timeline constraints. © PDA, Inc. 2015.