40 CFR 265.1085 - Standards: Tanks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... wind, moisture, and sunlight; and the operating practices used for the tank on which the fixed roof is... exposure to wind, moisture, and sunlight; and the operating practices used for the tank on which the fixed... so to avoid an unsafe condition. (3) The owner or operator shall inspect and monitor the air emission...

Bidirectional associations in multiplication memory: conditions of negative and positive transfer.

PubMed

Campbell, Jamie I D; Robert, Nicole D

2008-05-01

A variety of experimental evidence indicates that the memory representation for multiplication facts (e.g., 6 x 9 = 54) incorporates bidirectional links with a forward association from factors to product and a reverse association from product to factors. Surprisingly, the authors did not find evidence in Experiment 1 of facilitative transfer-of-practice from multiplication (6 x 9 = ?) to factoring (54 = ? x ?); in fact, multiplication practice produced item-specific interference with factoring. Similarly, the authors found no evidence in Experiment 2 that repetition of specific factoring problems (54 = ? x ?) facilitated performance of corresponding multiplication problems (6 x 9 = ?). In Experiment 3, participants practiced both multiplication and factoring and presented facilitative transfer in both directions. Thus, bidirectional facilitation occurred if both operations were practiced, but interference occurred when only one operation was practiced. We propose that this seemingly paradoxical behavior occurs because it is adaptive for the bidirectional retrieval structure to retain operational flexibility in the context of practicing both operations, whereas it is adaptive to specialize the memory representation for the practiced operation (i.e., factoring or multiplication) when only one operation is practiced.

36 CFR 5.8 - Discrimination in employment practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR COMMERCIAL AND PRIVATE OPERATIONS § 5.8 Discrimination in employment practices. (a) The proprietor..., disabling condition, or national origin in connection with any activity provided for or permitted by... basis of race, creed, color, ancestry, sex, age, disabling condition, or national origin is permitted in...

Aviation Safety: Efforts to Implement Flight Operational Quality Assurance Programs

DOT National Transportation Integrated Search

1997-12-01

Flight Operational Quality Assurance (FOQA) programs seek to use flight data to : detect technical flaws, unsafe practices, or conditions outside of desired : operating procedures early enough to allow timely intervention to avert : accidents or inci...

Snow management practices in French ski resorts

NASA Astrophysics Data System (ADS)

Spandre, Pierre; Francois, Hugues; George-Marcelpoil, Emmanuelle; Morin, Samuel

2016-04-01

Winter tourism plays a fundamental role in the economy of French mountain regions but also in other countries such as Austria, USA or Canada. Ski operators originally developed grooming methods to provide comfortable and safe skiing conditions. The interannual variability of snow conditions and the competition with international destinations and alternative tourism activities encouraged ski resorts to mitigate their dependency to weather conditions through snowmaking facilities. However some regions may not be able to produce machine made snow due to inadequate conditions and low altitude resorts are still negatively impacted by low snow seasons. In the meantime, even though the operations of high altitude resorts do not show any dependency to the snow conditions they invest in snowmaking facilities. Such developments of snowmaking facilities may be related to a confused and contradictory perception of climate change resulting in individualistic evolutions of snowmaking facilities, also depending on ski resorts main features such as their altitude and size. Concurrently with the expansion of snowmaking facilities, a large range of indicators have been used to discuss the vulnerability of ski resorts such as the so-called "100 days rule" which was widely used with specific thresholds (i.e. minimum snow depth, dates) and constraints (i.e. snowmaking capacity). The present study aims to provide a detailed description of snow management practices and major priorities in French ski resorts with respect to their characteristics. We set up a survey in autumn 2014, collecting data from 56 French ski operators. We identify the priorities of ski operators and describe their snowmaking and grooming practices and facilities. The operators also provided their perception of the ski resort vulnerability to snow and economic challenges which we could compare with the actual snow conditions and ski lift tickets sales during the period from 2001 to 2012.

Studies of Real Roughness Effects for Improved Modeling and Control of Practical Wall-Bounded Turbulent Flows

DTIC Science & Technology

2008-04-22

SUPPLEMENTARY NOTES 14. ABSTRACT The present effort investigates the effects of practical roughness replicated from a turbine blade damaged by deposition of...Motivation Most practical wall-bounded turbulent flows of interest, like flows over turbine blades , through heat exchangers, and over aircraft and ship...significantly roughened over time due to harsh operating conditions. Examples of such conditions include cumulative damage to turbine blades (Bons, 2002

A phase angle based diagnostic scheme to planetary gear faults diagnostics under non-stationary operational conditions

NASA Astrophysics Data System (ADS)

Feng, Ke; Wang, Kesheng; Ni, Qing; Zuo, Ming J.; Wei, Dongdong

2017-11-01

Planetary gearbox is a critical component for rotating machinery. It is widely used in wind turbines, aerospace and transmission systems in heavy industry. Thus, it is important to monitor planetary gearboxes, especially for fault diagnostics, during its operational conditions. However, in practice, operational conditions of planetary gearbox are often characterized by variations of rotational speeds and loads, which may bring difficulties for fault diagnosis through the measured vibrations. In this paper, phase angle data extracted from measured planetary gearbox vibrations is used for fault detection under non-stationary operational conditions. Together with sample entropy, fault diagnosis on planetary gearbox is implemented. The proposed scheme is explained and demonstrated in both simulation and experimental studies. The scheme proves to be effective and features advantages on fault diagnosis of planetary gearboxes under non-stationary operational conditions.

Low visibility operations/surface movement guidance and control system (LVO/SMGCS) chart usability : an examination of flightcrew position awareness in homogeneous 300 ft/75 m RVR conditions

DOT National Transportation Integrated Search

2014-09-01

Two studies were conducted to identify best practices for the design of Low Visibility Operations/Surface Movement Guidance and Control System (LVO/SMGCS) paper charts and flightcrew use of them in extremely low visibility surface conditions. In the ...

The effects of structure, strategy and market conditions on the operating practices of physician-organization arrangements.

PubMed

Alexander, J A; Vaughn, T E; Burns, L R

2000-11-01

Research to date has documented weak or inconsistent associations between market and organizational factors and the adoption of physician-organization arrangements (POAs) (e.g. physician-hospital organizations, management service organizations and independent practice associations) designed to increase physician integration. We argue that POAs may mask considerable variation in how these entities are operated and governed. Further, because the operating policies and practices of POAs are likely to influence more directly the behaviour of physicians than the structural form of the POA, they may be more sensitive to the market and organizational contingencies that encourage integration. This study attempts to test empirically the relative effects of POA type and market, strategic and organization factors on the operating policies and practices of market-based POAs. Results suggest that type of POA, and market, strategic and organizational factors affect risk sharing, physician selection practices, physician monitoring practices and ways in which monitoring information is used to influence physician behaviour in POAs.

The Eastern Renewable Generation Integration Study: Insights on System Stress: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloom, Aaron; Novacheck, Josh

The Eastern Renewable Generation Integration Study (ERGIS) explores the operational impacts of the wide spread adoption of wind and solar photovoltaics (PV) resources in North America's Eastern and Quebec Interconnections. We explore the impact of large scale adoption of wind and solar generation on the unit commitment and economic dispatch of the largest coordinated power system in the world by simulating hourly and five-minute operations. Using NREL's high-performance computing capabilities and new methodologies to model operations, we found that the modeled system, as simulated with evolutionary change in 2026, could balance the variability and uncertainty of wind and solar PVmore » at a five-minute level under a variety of conditions. Our simulations achieve instantaneous penetrations that exceed 50% of load while meeting an annual penetration of 30% on an energy basis. The system meets balanced load and supply in all intervals, with modest curtailment, using technologies and practices that are widely available today. However, a variety of the conditions present in these simulations deviate substantially from historical practice. In this work, we analyze potentially stressful system conditions that occur in the simulations and identify opportunities for innovation, regulatory reform, and changes in operating practices that require further analysis to enable the transition to a system with more wind and solar PV.« less

Cleared for the visual approach: Human factor problems in air carrier operations

NASA Technical Reports Server (NTRS)

Monan, W. P.

1983-01-01

The study described herein, a set of 353 ASRS reports of unique aviation occurrences significantly involving visual approaches was examined to identify hazards and pitfalls embedded in the visual approach procedure and to consider operational practices that might help avoid future mishaps. Analysis of the report set identified nine aspects of the visual approach procedure that appeared to be predisposing conditions for inducing or exacerbating the effects of operational errors by flight crew members or controllers. Predisposing conditions, errors, and operational consequences of the errors are discussed. In a summary, operational policies that might mitigate the problems are examined.

40 CFR 60.56a - Standards for municipal waste combustor operating practices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... cause such facility to exceed the carbon monoxide standards shown in table 1. Table 1—MWC Operating..., at a minimum, address the following elements of MWC unit operation: (1) Summary of the applicable... periodic upset or off-specification conditions; (8) Procedures for minimizing particulate matter carryover...

40 CFR 60.56a - Standards for municipal waste combustor operating practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... cause such facility to exceed the carbon monoxide standards shown in table 1. Table 1—MWC Operating..., at a minimum, address the following elements of MWC unit operation: (1) Summary of the applicable... periodic upset or off-specification conditions; (8) Procedures for minimizing particulate matter carryover...

40 CFR 60.56a - Standards for municipal waste combustor operating practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... cause such facility to exceed the carbon monoxide standards shown in table 1. Table 1—MWC Operating..., at a minimum, address the following elements of MWC unit operation: (1) Summary of the applicable... periodic upset or off-specification conditions; (8) Procedures for minimizing particulate matter carryover...

40 CFR 60.56a - Standards for municipal waste combustor operating practices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... cause such facility to exceed the carbon monoxide standards shown in table 1. Table 1—MWC Operating..., at a minimum, address the following elements of MWC unit operation: (1) Summary of the applicable... periodic upset or off-specification conditions; (8) Procedures for minimizing particulate matter carryover...

Assessment of Manual Operation Time for the Manufacturing of Thin Film Transistor Liquid Crystal Display: A Bayesian Approach

NASA Astrophysics Data System (ADS)

Shen, Chien-wen

2009-01-01

During the processes of TFT-LCD manufacturing, steps like visual inspection of panel surface defects still heavily rely on manual operations. As the manual inspection time of TFT-LCD manufacturing could range from 4 hours to 1 day, the reliability of time forecasting is thus important for production planning, scheduling and customer response. This study would like to propose a practical and easy-to-implement prediction model through the approach of Bayesian networks for time estimation of manual operated procedures in TFT-LCD manufacturing. Given the lack of prior knowledge about manual operation time, algorithms of necessary path condition and expectation-maximization are used for structural learning and estimation of conditional probability distributions respectively. This study also applied Bayesian inference to evaluate the relationships between explanatory variables and manual operation time. With the empirical applications of this proposed forecasting model, approach of Bayesian networks demonstrates its practicability and prediction accountability.

A common body of care: the ethics and politics of teamwork in the operating theater are inseparable.

PubMed

Bleakley, Alan

2006-06-01

In the operating theater, the micro-politics of practice, such as interpersonal communications, are central to patient safety and are intimately tied with values as well as knowledge and skills. Team communication is a shared and distributed work activity. In an era of "professionalism," that must now encompass "interprofessionalism," a virtue ethics framework is often invoked to inform practice choices, with reference to phronesis or practical wisdom. However, such a framework is typically cast in individualistic terms as a character trait, rather than in terms of a distributed quality that may be constituted through intentionally collaborative practice, or is an emerging property of a complex, adaptive system. A virtue ethics approach is a necessary but not sufficient condition for a collaborative bioethics within the operating theater. There is also an ecological imperative-the patient's entry into the household (oikos) of the operating theater invokes the need for "hospitality" as a form of ethical practice.

Influence of operating conditions on the optimum design of electric vehicle battery cooling plates

NASA Astrophysics Data System (ADS)

Jarrett, Anthony; Kim, Il Yong

2014-01-01

The efficiency of cooling plates for electric vehicle batteries can be improved by optimizing the geometry of internal fluid channels. In practical operation, a cooling plate is exposed to a range of operating conditions dictated by the battery, environment, and driving behaviour. To formulate an efficient cooling plate design process, the optimum design sensitivity with respect to each boundary condition is desired. This determines which operating conditions must be represented in the design process, and therefore the complexity of designing for multiple operating conditions. The objective of this study is to determine the influence of different operating conditions on the optimum cooling plate design. Three important performance measures were considered: temperature uniformity, mean temperature, and pressure drop. It was found that of these three, temperature uniformity was most sensitive to the operating conditions, especially with respect to the distribution of the input heat flux, and also to the coolant flow rate. An additional focus of the study was the distribution of heat generated by the battery cell: while it is easier to assume that heat is generated uniformly, by using an accurate distribution for design optimization, this study found that cooling plate performance could be significantly improved.

29 CFR 1910.420 - Safe practices manual.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Commercial Diving Operations General Operations Procedures § 1910.420..., equipment failure, adverse environmental conditions, and medical illness and injury. [42 FR 37668, July 22...

7 CFR 205.239 - Livestock living conditions.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.239 Livestock living conditions. (a) The producer of an organic livestock operation must establish and maintain year-round...

7 CFR 205.239 - Livestock living conditions.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.239 Livestock living conditions. (a) The producer of an organic livestock operation must establish and maintain year-round...

7 CFR 205.239 - Livestock living conditions.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.239 Livestock living conditions. (a) The producer of an organic livestock operation must establish and maintain year-round...

Factors Influencing the Fatigue Strength of Materials

NASA Technical Reports Server (NTRS)

Bollenrath, F

1941-01-01

A number of factors are considered which influence the static and fatigue strength of materials under practical operating conditions as contrasted with the relations obtaining under conditions of the usual testing procedure. Such factors are interruptions in operation, periodically fluctuating stress limits and mean stresses with periodic succession of several groups and stress states, statistical changes and succession of stress limits and mean stresses, frictional corrosion at junctures, and notch effects.

43 CFR 417.3 - Notice of recommendations and determinations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... RECLAMATION, DEPARTMENT OF THE INTERIOR PROCEDURAL METHODS FOR IMPLEMENTING COLORADO RIVER WATER CONSERVATION... raised, cropping practices, the type of irrigation system in use, the condition of water carriage and distribution facilities, record of water orders, and rejections of ordered water, general operating practices...

43 CFR 417.3 - Notice of recommendations and determinations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... RECLAMATION, DEPARTMENT OF THE INTERIOR PROCEDURAL METHODS FOR IMPLEMENTING COLORADO RIVER WATER CONSERVATION... raised, cropping practices, the type of irrigation system in use, the condition of water carriage and distribution facilities, record of water orders, and rejections of ordered water, general operating practices...

43 CFR 417.3 - Notice of recommendations and determinations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... RECLAMATION, DEPARTMENT OF THE INTERIOR PROCEDURAL METHODS FOR IMPLEMENTING COLORADO RIVER WATER CONSERVATION... raised, cropping practices, the type of irrigation system in use, the condition of water carriage and distribution facilities, record of water orders, and rejections of ordered water, general operating practices...

Surveillance of Environmental and Procedural Measures of Infection Control in the Operating Theatre Setting

PubMed Central

Raggi, Alessandra; Sanna, Tiziana; Mazzetti, Magda; Orsi, Alessandra; Zanni, Angela; Farruggia, Patrizia

2017-01-01

The microbiological contamination of operating theatres and the lack of adherence to best practices by surgical staff represent some of the factors affecting Surgical Site Infections (SSIs). The aim of the present study was to assess the microbiological quality of operating settings and the staff compliance to the SSI evidence-based control measures. Ten operating rooms were examined for microbiological contamination of air and surfaces, after cleaning procedures, in “at rest” conditions. Furthermore, 10 surgical operations were monitored to assess staff compliance to the recommended practices. None of the air samples exceeded microbiological reference standards and only six of the 200 surface samples (3.0%) were slightly above recommended levels. Potentially pathogenic bacteria and moulds were never detected. Staff compliance to best practices varied depending on the type of behaviour investigated and the role of the operator. The major not compliant behaviours were: pre-operative skin antisepsis, crowding of the operating room and hand hygiene of the anaesthetist. The good environmental microbiological quality observed is indicative of the efficacy of the cleaning-sanitization procedures adopted. The major critical point was staff compliance to recommended practices. Awareness campaigns are therefore necessary, aimed at improving the organisation of work so as to facilitate compliance to operative protocols. PMID:29283367

Decision support for operations and maintenance (DSOM) system

DOEpatents

Jarrell, Donald B [Kennewick, WA; Meador, Richard J [Richland, WA; Sisk, Daniel R [Richland, WA; Hatley, Darrel D [Kennewick, WA; Brown, Daryl R [Richland, WA; Keibel, Gary R [Richland, WA; Gowri, Krishnan [Richland, WA; Reyes-Spindola, Jorge F [Richland, WA; Adams, Kevin J [San Bruno, CA; Yates, Kenneth R [Lake Oswego, OR; Eschbach, Elizabeth J [Fort Collins, CO; Stratton, Rex C [Richland, WA

2006-03-21

A method for minimizing the life cycle cost of processes such as heating a building. The method utilizes sensors to monitor various pieces of equipment used in the process, for example, boilers, turbines, and the like. The method then performs the steps of identifying a set optimal operating conditions for the process, identifying and measuring parameters necessary to characterize the actual operating condition of the process, validating data generated by measuring those parameters, characterizing the actual condition of the process, identifying an optimal condition corresponding to the actual condition, comparing said optimal condition with the actual condition and identifying variances between the two, and drawing from a set of pre-defined algorithms created using best engineering practices, an explanation of at least one likely source and at least one recommended remedial action for selected variances, and providing said explanation as an output to at least one user.

Shared-use bus priority lanes on city streets : case studies in design and management

DOT National Transportation Integrated Search

2012-04-01

This report examines the policies and strategies governing the design and, especially, operations of bus lanes in major congested urban centers. It focuses on bus lanes that operate in mixed traffic conditions; the study does not examine practices co...

The practice and physiological basis of collecting, storing and planting Populus hardwood cuttings

Treesearch

Anne S. Fege

1983-01-01

Producing healthy hardwood cuttings for Populus plantation establishment requires attention to the management of clonal nurseries, timely collection of cuttings, adequate grading of cuttings, storage temperature and conditions, preplanting treatments, and planting operations. Recommended nursery practices are outlined, along with their grounding in...

A Practice-Oriented Bifurcation Analysis for Pulse Energy Converters. Part 2: An Operating Regime

NASA Astrophysics Data System (ADS)

Kolokolov, Yury; Monovskaya, Anna

The paper continues the discussion on bifurcation analysis for applications in practice-oriented solutions for pulse energy conversion systems (PEC-systems). Since a PEC-system represents a nonlinear object with a variable structure, then the description of its dynamics evolution involves bifurcation analysis conceptions. This means the necessity to resolve the conflict-of-units between the notions used to describe natural evolution (i.e. evolution of the operating process towards nonoperating processes and vice versa) and the notions used to describe a desirable artificial regime (i.e. an operating regime). We consider cause-effect relations in the following sequence: nonlinear dynamics-output signal-operating characteristics, where these characteristics include stability and performance. Then regularities of nonlinear dynamics should be translated into regularities of the output signal dynamics, and, after, into an evolutional picture of each operating characteristic. In order to make the translation without losses, we first take into account heterogeneous properties within the structures of the operating process in the parametrical (P-) and phase (X-) spaces, and analyze regularities of the operating stability and performance on the common basis by use of the modified bifurcation diagrams built in joint PX-space. Then, the correspondence between causes (degradation of the operating process stability) and effects (changes of the operating characteristics) is decomposed into three groups of abnormalities: conditionally unavoidable abnormalities (CU-abnormalities); conditionally probable abnormalities (CP-abnormalities); conditionally regular abnormalities (CR-abnormalities). Within each of these groups the evolutional homogeneity is retained. After, the resultant evolution of each operating characteristic is naturally aggregated through the superposition of cause-effect relations in accordance with each of the abnormalities. We demonstrate that the practice-oriented bifurcation analysis has fundamentally specific purposes and tools, like for the computer-based bifurcation analysis and the experimental bifurcation analysis. That is why, from our viewpoint, it seems to be a rather novel direction in the general context of bifurcation analysis conceptions. We believe that the discussion could be interesting to pioneer research intended for the design of promising systems of pulse energy conversion.

Kansas Department of Transportation's enterprise energy and carbon accounting and utility research phase 1B : embodied and operational energy and carbon in buildings and vehicles.

DOT National Transportation Integrated Search

2012-03-01

Many organizations have become concerned about the environmental impact of their facilities and : operations. In order to lessen environmental impact, quantitative assessment of practice based on : improvements from a baseline condition is needed. Th...

POLLUTION EFFECTS OF ABNORMAL OPERATIONS IN IRON AND STEEL MAKING. VOLUME V. ELECTRIC ARC FURNACE, MANUAL OF PRACTICE

EPA Science Inventory

The report is one in a six-volume series considering abnormal operating conditions (AOCs) in the primary section (sintering, blast furnace ironmaking, open hearth, electric furnace, and basic oxygen steelmaking) of an integrated iron and steel plant. Pollution standards, generall...

POLLUTION EFFECTS OF ABNORMAL OPERATIONS IN IRON AND STEEL MAKING. VOLUME II. SINTERING, MANUAL OF PRACTICE

EPA Science Inventory

The report is one in a six-volume series considering abnormal operating conditions (AOCs) in the primary section (sintering, blast furnace ironmaking, open hearth, electric furnace, and basic oxygen steelmaking) of an integrated iron and steel plant. Pollution standards, generall...

POLLUTION EFFECTS OF ABNORMAL OPERATIONS IN IRON AND STEEL MAKING. VOLUME III. BLAST FURNACE IRONMAKING, MANUAL OF PRACTICE

EPA Science Inventory

The report is one in a six-volume series considering abnormal operating conditions (AOCs) in the primary section (sintering, blast furnace ironmaking, open hearth, electric furnace, and basic oxygen steelmaking) of an integrated iron and steel plant. Pollution standards, generall...

POLLUTION EFFECTS OF ABNORMAL OPERATIONS IN IRON AND STEEL MAKING. VOLUME IV. OPEN HEARTH FURNACE, MANUAL OF PRACTICE

EPA Science Inventory

The report is one in a six-volume series considering abnormal operating conditions (AOCs) in the primary section (sintering, blast furnace ironmaking, open hearth, electric furnace, and basic oxygen steelmaking) of an integrated iron and steel plant. Pollution standards, generall...

POLLUTION EFFECTS OF ABNORMAL OPERATIONS IN IRON AND STEEL MAKING. VOLUME VI. BASIC OXYGEN PROCESS, MANUAL OF PRACTICE

EPA Science Inventory

The report is one in a six-volume series considering abnormal operating conditions (AOCs) in the primary section (sintering, blast furnace ironmaking, open hearth, electric furnace, and basic oxygen steelmaking) of an integrated iron and steel plant. Pollution standards, generall...

Assessment of the Technology and Practice for Determining Casing Degradation during Offshore Drilling Operations.

DTIC Science & Technology

1982-09-01

industries. Transport of hydrocarbons Castagnet. A.COG. InStituto de Energia Atomica. Sao Paulo (Brazil). Divisao de ApI icacao de Radioisotopos na...DETECTOR*; MEETING PAPER; OPERATING CONDITION; PIPELINE*; PRESSURE: SAFETY EQUIPMENT; SOLAR ENERGY: THERMAL INSULATION: TUBE; VALVE Leaks In gas grids

49 CFR 236.913 - Filing and approval of PSPs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... assessment for the previous condition was conducted using the same methodology as that for operation under the proposed condition; and (viii) If an independent third-party assessment is required or is... outside existing accepted practices (see appendix C); and the PSP describes a locomotive-borne product...

49 CFR 236.913 - Filing and approval of PSPs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... assessment for the previous condition was conducted using the same methodology as that for operation under the proposed condition; and (viii) If an independent third-party assessment is required or is... outside existing accepted practices (see appendix C); and the PSP describes a locomotive-borne product...

49 CFR 236.913 - Filing and approval of PSPs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... assessment for the previous condition was conducted using the same methodology as that for operation under the proposed condition; and (viii) If an independent third-party assessment is required or is... outside existing accepted practices (see appendix C); and the PSP describes a locomotive-borne product...

10 CFR 50.65 - Requirements for monitoring the effectiveness of maintenance at nuclear power plants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... with safety and, where practical, take into account industry-wide operating experience. When the...) of this section is not required where it has been demonstrated that the performance or condition of a... evaluations does not exceed 24 months. The evaluations shall take into account, where practical, industry-wide...

40 CFR 63.1357 - Temporary, conditioned exemption from particulate matter and opacity standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the Portland Cement Manufacturing Industry Other § 63.1357 Temporary, conditioned exemption from... applicable to cement kilns and clinker coolers. (2) Any permit or other emissions or operating parameter or other limitation on workplace practices that are applicable to cement kilns and clinker coolers to...

40 CFR 63.1357 - Temporary, conditioned exemption from particulate matter and opacity standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the Portland Cement Manufacturing Industry Other § 63.1357 Temporary, conditioned exemption from... applicable to cement kilns and clinker coolers. (2) Any permit or other emissions or operating parameter or other limitation on workplace practices that are applicable to cement kilns and clinker coolers to...

Evaluation of Winter Operational Runway Friction Measurement Equipment, Procedures, and Research

NASA Technical Reports Server (NTRS)

1995-01-01

This document produced by the FAA/Industry Winter Runway Friction Measurement and Reporting Working Group, is designed to provide an overview of current information on the present guidance, practices, and procedures for reporting runway pavement surface conditions during winter operations at airports. It contains recommendations on the desirability of providing the best procedural consistency and standardization and discusses the available means to implement the guidance that will result in improved aviation safety at airports during hazardous winter conditions.

7 CFR 42.140 - Operating Characteristic (OC) curves for on-line sampling and inspection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS STANDARDS FOR CONDITION OF FOOD CONTAINERS...

Prognostics and Health Management of Wind Turbines -- Current Status and Future Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

The global wind industry has seen tremendous growth during the past two decades. However, the industry is challenged by premature component failures, which lead to increased turbine downtime and subsequently, cost of energy for wind power. To mitigate the impacts from these failures, the wind industry has been exploring various areas for improvements ranging from product design, new materials or lubricants, to operation and maintenance (O&M) practices. Condition-based maintenance or prognostics and health management (PHM) has been explored as one enabling technology for improving O&M practices. This chapter provides a brief overview of wind turbine PHM with a focus onmore » operational data mining and condition monitoring of drivetrains. Some future research and development opportunities in wind turbine PHM are also briefly discussed.« less

Kansas Department of Transportation's enterprise energy and carbon accounting and utility research phase 1B : embodied and operational energy and carbon in buildings and vehicles : technical summary.

DOT National Transportation Integrated Search

2012-03-01

Many organizations have become concerned about the environmental impact of their facilities and operations. In order to lessen environmental impact, quantitative assessment of practice based on improvements from a baseline condition is needed. The Ka...

Principles of adoption of the successful environmental practices used in developed countries into mining industry in developing countries.

NASA Astrophysics Data System (ADS)

Masaitis, Alexandra

2013-04-01

The successful implementation of the environmental practices in the mining industry is of a paramount importance, as it not only prevents both local and trans-border pollution but also guarantees clean and healthy environment for the people regardless of their place of habitation. It is especially important to encourage the progress of the environmental practices implementation in developing countries because such countries have resource-oriented economy based on exploitation of nonrenewable resources. Poor environmental practices in developing countries will lead to local environmental crises that could eventually spill into surrounding countries including the most economically advanced. This abstract is a summary of a two-year research project attempted (1) to determine deficiencies of the mining sector ecological practices in developing countries and (2) to suggest substitute practices from developed countries that could be adapted to the developing countries reality. The following research methods were used: 1. The method of the system analysis, where the system is an interaction of the sets of environmental practices with the global mining sector; 2. The comparative method of inquiry, where the comparison was made between environmental protection practices as implemented in the US (developed country) and the developing countries such as RF, Mongolia mining sectors; 3. Quantitative date analysis, where date was collected from "The collection of statistic data", Russian Geographic Society Annual reports, the US EPA open reports, and the USGS Reports; The following results were obtained: Identified the systemic crisis of the ecological environmental policies and practices in the mining sector in developing countries based on the exploitation of nonrenewable resources, absence of the ecological interest by the mining companies that lack mechanisms of environmental and public health protection, the lack of insurance policy, the lack of risk assistance, and in the presence of the audit and monitoring that do not address the local conditions of the mining operations. Based on the above the following concepts were thought of to improve the environmental conditions in mining sector: 1. Was developed the Regional Environmental Management principle based on the local conditions such as physiographic region, local population, and socioeconomic conditions of the area; 2. Devised were criteria for the risk assessment for developing countries. Where the fundamental principals were public health, both near and far from the operation, environmental and biodiversity impact, waste management, long- and short- term rehabilitation plans, compliance with international standards and norms. 3. Developed was the mechanism of the economic motivation to make mining operations "environmentally friendly" that includes defrayal of expenses from both direct and indirect damages. 4. Identified were spheres of possible cooperation between mining companies, government organizations, and the NGOs. These include development of international standards for Good Neighbor Agreement, exchange of environmental information, exchange of successful environmental, health, and safety practices between mining operations from developed and developing countries. The study showed the dire necessity for the mining industry that operates in developing countries to adopt the successful environmental practices used in developed countries. To achieve this goal the Regional Environmental Management principle, the risk assessment criteria, the mechanism of the economic motivation and the principles for international cooperation can play an extremely important role.

[Numerical simulation and operation optimization of biological filter].

PubMed

Zou, Zong-Sen; Shi, Han-Chang; Chen, Xiang-Qiang; Xie, Xiao-Qing

2014-12-01

BioWin software and two sensitivity analysis methods were used to simulate the Denitrification Biological Filter (DNBF) + Biological Aerated Filter (BAF) process in Yuandang Wastewater Treatment Plant. Based on the BioWin model of DNBF + BAF process, the operation data of September 2013 were used for sensitivity analysis and model calibration, and the operation data of October 2013 were used for model validation. The results indicated that the calibrated model could accurately simulate practical DNBF + BAF processes, and the most sensitive parameters were the parameters related to biofilm, OHOs and aeration. After the validation and calibration of model, it was used for process optimization with simulating operation results under different conditions. The results showed that, the best operation condition for discharge standard B was: reflux ratio = 50%, ceasing methanol addition, influent C/N = 4.43; while the best operation condition for discharge standard A was: reflux ratio = 50%, influent COD = 155 mg x L(-1) after methanol addition, influent C/N = 5.10.

Iowa pavement asset management decision-making framework : [tech transfer summary].

DOT National Transportation Integrated Search

2015-10-01

A structured framework and tool that can reflect local requirements, : practices, and operational conditions would greatly assist local : agencies in making consistent and defensible pavement treatment : selection decisions.

40 CFR 63.1357 - Temporary, conditioned exemption from particulate matter and opacity standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Cement Manufacturing Industry Other § 63.1357 Temporary, conditioned exemption from particulate matter... chapter that are applicable to cement kilns and in-line kiln/raw mills. (2) Any permit or other emissions or operating parameter or other limitation on workplace practices that are applicable to cement kilns...

40 CFR 63.1357 - Temporary, conditioned exemption from particulate matter and opacity standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Cement Manufacturing Industry Other § 63.1357 Temporary, conditioned exemption from particulate matter... chapter that are applicable to cement kilns and in-line kiln/raw mills. (2) Any permit or other emissions or operating parameter or other limitation on workplace practices that are applicable to cement kilns...

Influences of operational practices on municipal solid waste landfill storage capacity.

PubMed

Li, Yu-Chao; Liu, Hai-Long; Cleall, Peter John; Ke, Han; Bian, Xue-Cheng

2013-03-01

The quantitative effects of three operational factors, that is initial compaction, decomposition condition and leachate level, on municipal solid waste (MSW) landfill settlement and storage capacity are investigated in this article via consideration of a hypothetical case. The implemented model for calculating landfill compression displacement is able to consider decreases in compressibility induced by biological decomposition and load dependence of decomposition compression for the MSW. According to the investigation, a significant increase in storage capacity can be achieved by intensive initial compaction, adjustment of decomposition condition and lowering of leachate levels. The quantitative investigation presented aims to encourage landfill operators to improve management to enhance storage capacity. Furthermore, improving initial compaction and creating a preferential decomposition condition can also significantly reduce operational and post-closure settlements, respectively, which helps protect leachate and gas management infrastructure and monitoring equipment in modern landfills.

Method for Prediction of the Power Output from Photovoltaic Power Plant under Actual Operating Conditions

NASA Astrophysics Data System (ADS)

Obukhov, S. G.; Plotnikov, I. A.; Surzhikova, O. A.; Savkin, K. D.

2017-04-01

Solar photovoltaic technology is one of the most rapidly growing renewable sources of electricity that has practical application in various fields of human activity due to its high availability, huge potential and environmental compatibility. The original simulation model of the photovoltaic power plant has been developed to simulate and investigate the plant operating modes under actual operating conditions. The proposed model considers the impact of the external climatic factors on the solar panel energy characteristics that improves accuracy in the power output prediction. The data obtained through the photovoltaic power plant operation simulation enable a well-reasoned choice of the required capacity for storage devices and determination of the rational algorithms to control the energy complex.

Hybrid Composite Coatings for Durable and Efficient Solar Hydrogen Generation under Diverse Operating Conditions

DOE PAGES

Walczak, Karl A.; Segev, Gideon; Larson, David M.; ...

2017-02-17

Safe and practical solar-driven hydrogen generators must be capable of efficient and stable operation under diurnal cycling with full separation of gaseous H 2 and O 2 products. In this paper, a novel architecture that fulfills all of these requirements is presented. The approach is inherently scalable and provides versatility for operation under diverse electrolyte and lighting conditions. The concept is validated using a 1 cm 2 triple-junction photovoltaic cell with its illuminated photocathode protected by a composite coating comprising an organic encapsulant with an embedded catalytic support. The device is compatible with operation under conditions ranging from 1 Mmore » H 2SO 4 to 1 M KOH, enabling flexibility in selection of semiconductor, electrolyte, membrane, and catalyst. Stable operation at a solar-to-hydrogen conversion efficiency of >10% is demonstrated under continuous operation, as well as under diurnal light cycling for at least 4 d, with simulated sunlight. Operational characteristics are validated by extended time outdoor testing. A membrane ensures products are separated, with nonexplosive gas streams generated for both alkaline and acidic systems. Finally, analysis of operational characteristics under different lighting conditions is enabled by comparison of a device model to experimental data.« less

Stable operation of a Secure QKD system in the real-world setting

NASA Astrophysics Data System (ADS)

Tomita, Akihisa

2007-06-01

Quantum Key Distribution (QKD) now steps forward from the proof of principle to the validation of the practical feasibility. Nevertheless, the QKD technology should respond to the challenges from the real-world such as stable operation against the fluctuating environment, and security proof under the practical setting. We report our recent progress on stable operation of a QKD system, and key generation with security assurance. A QKD system should robust to temperature fluctuation in a common office environment. We developed a loop-mirror, a substitution of a Faraday mirror, to allow easy compensation for the temperature dependence of the device. Phase locking technique was also employed to synchronize the system clock to the quantum signals. This technique is indispensable for the transmission system based on the installed fiber cables, which stretch and shrink due to the temperature change. The security proof of QKD, however, has assumed the ideal conditions, such as the use of a genuine single photon source and/or unlimited computational resources. It has been highly desirable to give an assurance of security for practical systems, where the ideal conditions are no longer satisfied. We have constructed a theory to estimate the leakage information on the transmitted key under the practically attainable conditions, and have developed a QKD system equipped with software for secure key distillation. The QKD system generates the final key at the rate of 2000 bps after 20 km fiber transmission. Eavesdropper's information on the final key is guaranteed to be less than 2-7 per bit. This is the first successful generation of the secure key with quantitative assurance of the upper bound of the leakage information. It will put forth the realization of highly secure metropolitan optical communication network against any types of eavesdropping.

Achieving excellence in community health centers: implications for health reform.

PubMed

Gurewich, Deborah; Capitman, John; Sirkin, Jenna; Traje, Diana

2012-02-01

Existing studies tell us little about care quality variation within the community health center (CHC) delivery system. They also tell us little about the organizational conditions associated with CHCs that deliver especially high quality care. The purpose of this study was to examine the operational practices associated with a sample of high performing CHCs. Qualitative case studies of eight CHCs identified as delivering high-quality care relative to other CHCs were used to examine operational practices, including systems to facilitate care access, manage patient care, and monitor performance. Four common themes emerged that may contribute to high performance. At the same time, important differences across health centers were observed, reflecting differences in local environments and CHC capacity. In the development of effective, community-based models of care, adapting care standards to meet the needs of local conditions may be important.

The Validity and Utility of the California Family Risk Assessment under Practice Conditions in the Field: A Prospective Study

ERIC Educational Resources Information Center

Johnson, Will L.

2011-01-01

Objective: Analysis of the validity and implementation of a child maltreatment actuarial risk assessment model, the California Family Risk Assessment (CFRA). Questions addressed: (1) Is there evidence of the validity of the CFRA under field operating conditions? (2) Do actuarial risk assessment results influence child welfare workers' service…

Packing properties of starch-based powders under mild mechanical stress.

PubMed

Zanardi, I; Gabbrielli, A; Travagli, V

2009-07-01

This study reports the ability to settle of commercial pharmaceutical grade starch samples, both native and pregelatinized. The experiments were carried out under different relative humidity (RH%) conditions and the packing properties were evaluated using both official pharmacopoeial monograph conditions and also modified conditions in order to give a deeper knowledge of tapping under mild mechanical stress. The technique adopted, simulating common pharmaceutical operating practices, appears to be useful to estimate some technologically relevant features of diluent powder materials. Moreover, a general mathematical function has been applied to the experimental data; this could be appropriate for adequately describing material settling patterns and offers practical parameters for characterizing starch powders within the context of a pharmaceutical quality system.

Incorporating teleconnection information into reservoir operating policies using Stochastic Dynamic Programming and a Hidden Markov Model

NASA Astrophysics Data System (ADS)

Turner, Sean; Galelli, Stefano; Wilcox, Karen

2015-04-01

Water reservoir systems are often affected by recurring large-scale ocean-atmospheric anomalies, known as teleconnections, that cause prolonged periods of climatological drought. Accurate forecasts of these events -- at lead times in the order of weeks and months -- may enable reservoir operators to take more effective release decisions to improve the performance of their systems. In practice this might mean a more reliable water supply system, a more profitable hydropower plant or a more sustainable environmental release policy. To this end, climate indices, which represent the oscillation of the ocean-atmospheric system, might be gainfully employed within reservoir operating models that adapt the reservoir operation as a function of the climate condition. This study develops a Stochastic Dynamic Programming (SDP) approach that can incorporate climate indices using a Hidden Markov Model. The model simulates the climatic regime as a hidden state following a Markov chain, with the state transitions driven by variation in climatic indices, such as the Southern Oscillation Index. Time series analysis of recorded streamflow data reveals the parameters of separate autoregressive models that describe the inflow to the reservoir under three representative climate states ("normal", "wet", "dry"). These models then define inflow transition probabilities for use in a classic SDP approach. The key advantage of the Hidden Markov Model is that it allows conditioning the operating policy not only on the reservoir storage and the antecedent inflow, but also on the climate condition, thus potentially allowing adaptability to a broader range of climate conditions. In practice, the reservoir operator would effect a water release tailored to a specific climate state based on available teleconnection data and forecasts. The approach is demonstrated on the operation of a realistic, stylised water reservoir with carry-over capacity in South-East Australia. Here teleconnections relating to both the El Niño Southern Oscillation and the Indian Ocean Dipole influence local hydro-meteorological processes; statistically significant lag correlations have already been established. Simulation of the derived operating policies, which are benchmarked against standard policies conditioned on the reservoir storage and the antecedent inflow, demonstrates the potential of the proposed approach. Future research will further develop the model for sensitivity analysis and regional studies examining the economic value of incorporating long range forecasts into reservoir operation.

The Direct Methanol Liquid-Feed Fuel Cell

NASA Technical Reports Server (NTRS)

Halpert, Gerald

1997-01-01

Until the early 1990's the idea of a practical direct methanol fuel cell from transportation and other applications was just that, an idea. Several types of fuel cells that operate under near ambient conditions were under development.

49 CFR Appendix to Part 380 - LCV Driver Training Programs, Required Knowledge and Skills

Code of Federal Regulations, 2014 CFR

2014-10-01

... streets or roads that have low-density traffic conditions. Section 3—Safe Operating Practices The units in... of the driver. Changes in vehicle safety inspection, vision, communications, speed management, and...

49 CFR Appendix to Part 380 - LCV Driver Training Programs, Required Knowledge and Skills

Code of Federal Regulations, 2013 CFR

2013-10-01

... streets or roads that have low-density traffic conditions. Section 3—Safe Operating Practices The units in... of the driver. Changes in vehicle safety inspection, vision, communications, speed management, and...

Jet engine exhaust emissions of high altitude commercial aircraft projected to 1990

NASA Technical Reports Server (NTRS)

Grobman, J.; Ingebo, R. D.

1974-01-01

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high-altitude cruise conditions are presented. The forecasts are based on:(1) current knowledge of emission characteristics of combustors and augmentors; (2) the status of combustion research in emission reduction technology; and (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft fueled by either JP fuel, liquefied natural gas, or hydrogen. Results are presented for cruise conditions in terms of both an emission index (g constituent/kg fuel) and an emission rate (g constituent/hr).

Asymptotic boundary conditions for dissipative waves: General theory

NASA Technical Reports Server (NTRS)

Hagstrom, Thomas

1990-01-01

An outstanding issue in the computational analysis of time dependent problems is the imposition of appropriate radiation boundary conditions at artificial boundaries. Accurate conditions are developed which are based on the asymptotic analysis of wave propagation over long ranges. Employing the method of steepest descents, dominant wave groups are identified and simple approximations to the dispersion relation are considered in order to derive local boundary operators. The existence of a small number of dominant wave groups may be expected for systems with dissipation. Estimates of the error as a function of domain size are derived under general hypotheses, leading to convergence results. Some practical aspects of the numerical construction of the asymptotic boundary operators are also discussed.

Numerical Simulations of Flowfields in a Central-Dump Ramjet Combustor. 3. Effects of Chemistry

DTIC Science & Technology

1990-07-23

conditions [1,8]. The choked outflow conditions force the flow to become sonic at the throat of the exit nozzle. The choked outflow conditions force...are realistic because under most operating conditions in practical systems, the flow is choked at the throat of the exit nozzle. Furthermore, it has...timesteps in the early stages of the reactive flow case. The mixture is ignited at the end of timestep 160000. sTrEP .I070 160000 -Z ~ ~ - 36 828

Active Control of Engine Dynamics (Le controle actif pour la dynamique des moteurs)

DTIC Science & Technology

2002-11-01

optimum operating conditions, avoiding, for example, inadvertent operation when the pulsations can cause unacceptable rates of surface heat transfer or...such as shipboard incineration, and power and heat generation in the field. Because the practical problem of suppressing combustion instabilities has...aforementioned physical processes are essentially completed prior to entering the combustor. One consequence of fuel-air premixing is that the heat

78 FR 16051 - Vehicle/Track Interaction Safety Standards; High-Speed and High Cant Deficiency Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

...FRA is amending the Track Safety Standards and Passenger Equipment Safety Standards to promote the safe interaction of rail vehicles with the track over which they operate under a variety of conditions at speeds up to 220 m.p.h. The final rule revises standards for track geometry and safety limits for vehicle response to track conditions, enhances vehicle/track qualification procedures, and adds flexibility for permitting high cant deficiency train operations through curves at conventional speeds. The rule accounts for a range of vehicle types that are currently in operation, as well as vehicle types that may likely be used in future high-speed or high cant deficiency rail operations, or both. The rule is based on the results of simulation studies designed to identify track geometry irregularities associated with unsafe wheel/rail forces and accelerations, thorough reviews of vehicle qualification and revenue service test data, and consideration of international practices.

A novel field measurement method for determining fine particle and gas emissions from residential wood combustion

NASA Astrophysics Data System (ADS)

Tissari, Jarkko; Hytönen, Kati; Lyyränen, Jussi; Jokiniemi, Jorma

Emission data from residential wood combustion are usually obtained on test stands in the laboratory but these measurements do not correspond to the operational conditions in the field because of the technological boundary conditions (e.g. testing protocol, environmental and draught conditions). The field measurements take into account the habitual practice of the operators and provide the more reliable results needed for emission inventories. In this study, a workable and compact method for measuring emissions from residential wood combustion in winter conditions was developed. The emissions for fine particle, gaseous and PAH compounds as well as particle composition in real operational conditions were measured from seven different appliances. The measurement technique worked well and was evidently suitable for winter conditions. It was easy and fast to use, and no construction scaffold was needed. The dilution of the sample with the combination of a porous tube diluter and an ejector diluter was well suited to field measurement. The results indicate that the emissions of total volatile organic carbon (TVOC) (17 g kg -1 (of dry wood burned)), carbon monoxide (CO) (120 g kg -1) and fine particle mass (PM 1) (2.7 g kg -1) from the sauna stove were higher than in the other measured appliances. In the masonry heaters, baking oven and stove, the emissions were 2.9-9 g kg -1 TVOC, 28-68 g kg -1 CO and 0.6-1.6 g kg -1 PM 1. The emission of 12 PAHs (PAH 12) from the sauna stove was 164 mg kg -1 and consisted mainly of PAHs with four benzene rings in their structure. PAH 12 emission from other appliances was, on average, 21 mg kg -1 and was dominated by 2-ring PAHs. These results indicate that despite the non-optimal operational practices in the field, the emissions did not differ markedly from the laboratory measurements.

The Value of Biomedical Simulation Environments to Future Human Space Flight Missions

NASA Technical Reports Server (NTRS)

Mulugeta, Lealem; Myers, Jerry G.; Skytland, Nicholas G.; Platts, Steven H.

2010-01-01

With the ambitious goals to send manned missions to asteroids and onto Mars, substantial work will be required to ensure the well being of the men and women who will undertake these difficult missions. Unlike current International Space Station or Shuttle missions, astronauts will be required to endure long-term exposure to higher levels of radiation, isolation and reduced gravity. These new operation conditions will pose health risks that are currently not well understood and perhaps unanticipated. Therefore, it is essential to develop and apply advanced tools to predict, assess and mitigate potential hazards to astronaut health. NASA s Digital Astronaut Project (DAP) is working to develop and apply computational models of physiologic response to space flight operation conditions over various time periods and environmental circumstances. The collective application and integration of well vetted models assessing the physiology, biomechanics and anatomy is referred to as the Digital Astronaut. The Digital Astronaut simulation environment will serve as a practical working tool for use by NASA in operational activities such as the prediction of biomedical risks and functional capabilities of astronauts. In additional to space flight operation conditions, DAP s work has direct applicability to terrestrial biomedical research by providing virtual environments for hypothesis testing, experiment design, and to reduce animal/human testing. A practical application of the DA to assess pre and post flight responses to exercise is illustrated and the difficulty in matching true physiological responses is discussed.

Development of Principles for Multimodal Displays in Army Human-Robot Operations

DTIC Science & Technology

2010-06-01

Research Laboratory ATTN: RDRL- HRM -D Aberdeen Proving Ground, MD 21005-5425 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT...the practical limitations of various cognitive resource channels for HRI tasks. 2.1.2 Purpose Now that MRT and the common workload manipulations...with more mission targets. • Workload conditions were not counter-balanced for practice effects. 7 Increasing task difficulty generally

How Much of Language Acquisition Does Operant Conditioning Explain?

PubMed

Sturdy, Christopher B; Nicoladis, Elena

2017-01-01

Since the 1950s, when Chomsky argued that Skinner's arguments could not explain syntactic acquisition, psychologists have generally avoided explicitly invoking operant or instrumental conditioning as a learning mechanism for language among human children. In this article, we argue that this is a mistake. We focus on research that has been done on language learning in human infants and toddlers in order to illustrate our points. Researchers have ended up inventing learning mechanisms that, in actual practice, not only resemble but also in fact are examples of operant conditioning (OC) by any other name they select. We argue that language acquisition researchers should proceed by first ruling out OC before invoking alternative learning mechanisms. While it is possible that OC cannot explain all of the language acquisition, simple learning mechanisms that work across species may have some explanatory power in children's language learning.

How Much of Language Acquisition Does Operant Conditioning Explain?

PubMed Central

Sturdy, Christopher B.; Nicoladis, Elena

2017-01-01

Since the 1950s, when Chomsky argued that Skinner’s arguments could not explain syntactic acquisition, psychologists have generally avoided explicitly invoking operant or instrumental conditioning as a learning mechanism for language among human children. In this article, we argue that this is a mistake. We focus on research that has been done on language learning in human infants and toddlers in order to illustrate our points. Researchers have ended up inventing learning mechanisms that, in actual practice, not only resemble but also in fact are examples of operant conditioning (OC) by any other name they select. We argue that language acquisition researchers should proceed by first ruling out OC before invoking alternative learning mechanisms. While it is possible that OC cannot explain all of the language acquisition, simple learning mechanisms that work across species may have some explanatory power in children’s language learning. PMID:29163295

Highway traffic operations and freeway management : state-of-the-practice

DOT National Transportation Integrated Search

2003-03-01

This paper focuses on the proactive management of freeway facilities to balance the capacity of the transportation system and the prevailing demands and to respond to out-of-the-ordinary conditions (e.g., incidents, adverse weather, work zones, speci...

Reliable aerial thermography for energy conservation

NASA Technical Reports Server (NTRS)

Jack, J. R.; Bowman, R. L.

1981-01-01

A method for energy conservation, the aerial thermography survey, is discussed. It locates sources of energy losses and wasteful energy management practices. An operational map is presented for clear sky conditions. The map outlines the key environmental conditions conductive to obtaining reliable aerial thermography. The map is developed from defined visual and heat loss discrimination criteria which are quantized based on flat roof heat transfer calculations.

Characterizing (rating) the performance of large photovoltaic arrays for all operating conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, D.L.; Eckert, P.E.

1996-06-01

A new method has been developed for characterizing the electrical performance of photovoltaic arrays. The method provides both a ``rating`` at standard reporting conditions and a rigorous yet straightforward model for predicting array performance at all operating conditions. For the first time, the performance model handles the influences of irradiance, module temperature, solar spectrum, solar angle-of-incidence, and temperature coefficients, in a practical way. Validity of the procedure was confirmed during field testing of a 25-kW array recently installed by Arizona Public Service Co. on Carol Spring Mountain (which powers microwave, ceullular phone, and TV communictions equipment). This paper describes themore » characterization procedure, measured array performance, and the predictive model.« less

Naval Classical Thinkers and Operational Art

DTIC Science & Technology

2009-01-01

Principles and Practice of Military Operations on Land, published in 1911, did not attract as much attention as his previous two major works...thinker. He failed, for example, to consider factors such as social and cultural conditions in the rise of sea power; the rise of the English middle...three key ideas: the inherent value of a strategic central or interior position, the principle of concentration, and the close relationship between

Can cognitive behavioural therapy based strategies be integrated into physiotherapy for the prevention of chronic low back pain? A systematic review.

PubMed

Brunner, Emanuel; De Herdt, Amber; Minguet, Philippe; Baldew, Se-Sergio; Probst, Michel

2013-01-01

The primary purpose was to detect randomized controlled trials investigating cognitive behaviour therapy-based (CBT) treatments applied in acute/sub-acute low back pain (LBP). The secondary purpose was to analyse the methodological properties of the included studies, and to identify theory-based treatment strategies that are applicable for physiotherapists. A systematic literature search was conducted using four databases. Risk of bias of included studies was assessed and the methodological properties summarized. In addition, content and treatment theory of detected CBT-based strategies were systematically analysed and classified into three distinctive concepts of CBT: operant, cognitive and respondent treatment. Finally, applicability of treatment strategies in physiotherapy practice was discussed. Eight studies were included in the present systematic review. Half of the studies suffered from high risk of bias, and study characteristics varied in all domains of methodology, particularly in terms of treatment design and outcome measures. Graded activity, an operant treatment approach based on principles of operant conditioning, was identified as a CBT-based strategy with traceable theoretical justification that can be applied by physiotherapists. Operant conditioning can be integrated in ambulant physiotherapy practice and is a promising CBT-based strategy for the prevention of chronic LBP.

A simulation study of control and display requirements for zero-experience general aviation pilots

NASA Technical Reports Server (NTRS)

Stewart, Eric C.

1993-01-01

The purpose of this simulation study was to define the basic human factor requirements for operating an airplane in all weather conditions. The basic human factors requirements are defined as those for an operator who is a complete novice for airplane operations but who is assumed to have automobile driving experience. These operators thus have had no piloting experience or training of any kind. The human factor requirements are developed for a practical task which includes all of the basic maneuvers required to go from one airport to another airport in limited visibility conditions. The task was quite demanding including following a precise path with climbing and descending turns while simultaneously changing airspeed. The ultimate goal of this research is to increase the utility of general aviation airplanes - that is, to make them a practical mode of transportation for a much larger segment of the general population. This can be accomplished by reducing the training and proficiency requirements of pilots while improving the level of safety. It is believed that advanced technologies such as fly-by-wire (or light), and head-up pictorial displays can be of much greater benefit to the general aviation pilot than to the full-time, professional pilot.

The role of working memory and fluency practice on the reading comprehension of students who are dysfluent readers.

PubMed

Swanson, H Lee; O'Connor, Rollanda

2009-01-01

The authors investigated whether practice in reading fluency had a causal influence on the relationship between working memory (WM) and text comprehension for 155 students in Grades 2 and 4 who were poor or average readers. Dysfluent readers were randomly assigned to repeated reading or continuous reading practice conditions and compared with untreated dysfluent and fluent readers on posttest measures of fluency, word identification, vocabulary, and reading comprehension. Three main findings emerged: (a) The influence of WM on text comprehension was not related to fluency training, (b) dysfluent readers in the continuous-reading condition had higher posttest scores than dysfluent readers in the other conditions on measures of text comprehension but not on vocabulary, and (c) individual differences in WM better predicted posttest comprehension performance than word-attack skills. In general, the results suggested that although continuous reading increased comprehension, fluency practice did not compensate for WM demands. The results were interpreted within a model that viewed reading comprehension processes as competing for a limited supply of WM resources that operate independent of fluency.

29 CFR 1960.36 - General provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... channel of communication between employees and management concerning safety and health matters in agency workplaces. The committees provide a method by which employees can utilize their knowledge of workplace operations to assist agency management to improve policies, conditions, and practices. (b) Agencies may elect...

29 CFR 1960.36 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... channel of communication between employees and management concerning safety and health matters in agency workplaces. The committees provide a method by which employees can utilize their knowledge of workplace operations to assist agency management to improve policies, conditions, and practices. (b) Agencies may elect...

Utilizing a one-dimensional multispecies model to simulate the nutrient reduction and biomass structure in two types of H2-based membrane-aeration biofilm reactors (H2-MBfR): model development and parametric analysis.

PubMed

Wang, Zuowei; Xia, Siqing; Xu, Xiaoyin; Wang, Chenhui

2016-02-01

In this study, a one-dimensional multispecies model (ODMSM) was utilized to simulate NO3(-)-N and ClO4(-) reduction performances in two kinds of H2-based membrane-aeration biofilm reactors (H2-MBfR) within different operating conditions (e.g., NO3(-)-N/ClO4(-) loading rates, H2 partial pressure, etc.). Before the simulation process, we conducted the sensitivity analysis of some key parameters which would fluctuate in different environmental conditions, then we used the experimental data to calibrate the more sensitive parameters μ1 and μ2 (maximum specific growth rates of denitrification bacteria and perchlorate reduction bacteria) in two H2-MBfRs, and the diversity of the two key parameters' values in two types of reactors may be resulted from the different carbon source fed in the reactors. From the simulation results of six different operating conditions (four in H2-MBfR 1 and two in H2-MBfR 2), the applicability of the model was approved, and the variation of the removal tendency in different operating conditions could be well simulated. Besides, the rationality of operating parameters (H2 partial pressure, etc.) could be judged especially in condition of high nutrients' loading rates. To a certain degree, the model could provide theoretical guidance to determine the operating parameters on some specific conditions in practical application.

Development and Evaluation of 2-D and 3-D Exocentric Synthetic Vision Navigation Display Concepts for Commercial Aircraft

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III; Kramer, Lynda J.; Arthur, J. J., III; Bailey, Randall E.; Sweeters, Jason L.

2005-01-01

NASA's Synthetic Vision Systems (SVS) project is developing technologies with practical applications that will help to eliminate low visibility conditions as a causal factor to civil aircraft accidents while replicating the operational benefits of clear day flight operations, regardless of the actual outside visibility condition. The paper describes experimental evaluation of a multi-mode 3-D exocentric synthetic vision navigation display concept for commercial aircraft. Experimental results evinced the situation awareness benefits of 2-D and 3-D exocentric synthetic vision displays over traditional 2-D co-planar navigation and vertical situation displays. Conclusions and future research directions are discussed.

Multi-Dimensionality of Synthetic Vision Cockpit Displays: Prevention of Controlled-Flight-Into-Terrain

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III; Kramer, Lynda J.; Arthur, Jarvis J.; Bailey, Randall E.

2006-01-01

NASA's Synthetic Vision Systems (SVS) project is developing technologies with practical applications that will help to eliminate low visibility conditions as a causal factor to civil aircraft accidents while replicating the operational benefits of clear day flight operations, regardless of the actual outside visibility condition. The paper describes experimental evaluation of a multi-mode 3-D exocentric synthetic vision navigation display concept for commercial aircraft. Experimental results showed the situation awareness benefits of 2-D and 3-D exocentric synthetic vision displays over traditional 2-D co-planar navigation and vertical situation displays. Conclusions and future research directions are discussed.

Introducing priority setting and resource allocation in home and community care programs.

PubMed

Urquhart, Bonnie; Mitton, Craig; Peacock, Stuart

2008-01-01

To use evidence from research to identify and implement priority setting and resource allocation that incorporates both ethical practices and economic principles. Program budgeting and marginal analysis (PBMA) is based on two key economic principles: opportunity cost (i.e. doing one thing instead of another) and the margin (i.e. resource allocation should result in maximum benefit for available resources). An ethical framework for priority setting and resource allocation known as Accountability for Reasonableness (A4R) focuses on making sure that resource allocations are based on a fair decision-making process. It includes the following four conditions: publicity; relevance; appeals; and enforcement. More recent literature on the topic suggests that a fifth condition, that of empowerment, should be added to the Framework. The 2007-08 operating budget for Home and Community Care, excluding the residential sector, was developed using PBMA and incorporating the A4R conditions. Recommendations developed using PBMA were forwarded to the Executive Committee, approved and implemented for the 2007-08 fiscal year operating budget. In addition there were two projects approved for approximately $200,000. PBMA is an improvement over previous practice. Managers of Home and Community Care are committed to using the process for the 2008-09 fiscal year operating budget and expanding its use to include mental health and addictions services. In addition, managers of public health prevention and promotion services are considering using the process.

Transformer overload characteristics---Bubble evolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woods, E.E.; Wendel, R.C.; Dresser, R.D.

1988-08-01

Project RP1289-3 explores significant parameters affecting bubble evolution from transformer oil under high temperature operating conditions to address the question: Does ''real life'' operation of a transformer cause harmful bubbling conditions. Studies outlined in the project are designed to determine when bubbling occurs in transformers and if bubbling can be harmful during the normal operation of these transformers. Data obtained from these studies should provide a basis for utilities to perform risk assessments in relation to their loading practices. The program is designed to demonstrate those conditions under which bubbling occurs in transformers by using controlled models and actual signalmore » phase transformers that were designed to give access to both high and low voltage windings for the purpose of viewing bubble generation. Results and observations from tests on the full-size transformers, thermal models, and electrical models have led to the conclusion that bubbles can occur under operating conditions. The electrical models show that dielectric strength can be reduced by as much as 40 percent due to the presence of bubbles. Because of factory safety considerations, the transformers could not be tested at hot spot temperatures greater than 140/degree/C. Therefore, there is no information on the dielectric strength of the full-size transformers under bubbling conditions. 4 refs., 28 figs., 45 tabs.« less

Effective squeezing enhancement via measurement-induced non-Gaussian operation and its application to the dense coding scheme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kitagawa, Akira; Takeoka, Masahiro; Sasaki, Masahide

2005-08-15

We study the measurement-induced non-Gaussian operation on the single- and two-mode Gaussian squeezed vacuum states with beam splitters and on-off type photon detectors, with which mixed non-Gaussian states are generally obtained in the conditional process. It is known that the entanglement can be enhanced via this non-Gaussian operation on the two-mode squeezed vacuum state. We show that, in the range of practical squeezing parameters, the conditional outputs are still close to Gaussian states, but their second order variances of quantum fluctuations and correlations are effectively suppressed and enhanced, respectively. To investigate an operational meaning of these states, especially entangled states,more » we also evaluate the quantum dense coding scheme from the viewpoint of the mutual information, and we show that non-Gaussian entangled state can be advantageous compared with the original two-mode squeezed state.« less

The Geographic Distribution, Ownership, Prices, and Scope of Practice at Retail Clinics

PubMed Central

Rudavsky, Rena; Pollack, Craig Evan; Mehrotra, Ateev

2009-01-01

BACKGROUND As a new model of care in the United States (US), retail clinics have generated much interest. Located physically within a retail store, they provide simple acute and preventive care services for a fixed price and without an appointment. OBJECTIVE To describe where retail clinics have opened in the US, their ownership structure, scope of practice, prices, acceptance of insurance, and the fraction of the population that lives within a short driving distance of a clinic. DESIGN Cross-sectional descriptive study SAMPLE All retail clinics operating in the US as of August 2008 MEASUREMENTS Population living within five and ten-minute driving distances of a retail clinic RESULTS In August 2008, 42 operators ran 982 clinics in 33 states; 88.4% were located in urban areas. An estimated 13.4% and 35.8% of the US urban population lives within a five-minute and ten-minute driving distance respectively from a retail clinic. The proportion of the population that lives close to a retail clinic is higher than 50 percent in some cities such as Nashville (56.7% five-minute, 93.7% ten-minute) and Minneapolis-St. Paul, MN (50.9%, 96.0%). The majority of retail clinic operators (25, 59.5%) are hospital chains and/or physician groups, but they only operate 11.4% of the clinics nationally. Simple acute conditions, skin conditions, and immunizations make up the majority of retail clinics’ limited scope of practice. Across operators, those without insurance paid on average $78 for a sore throat visit and $63 for an adult tetanus booster vaccine. In a random sample of clinics, we found that 97% accepted private insurance, 93% accepted Medicare fee-for-service, and 60% accepted some form of Medicaid. LIMITATIONS Geographic access is only one of many factors that influence whether an individual visits a retail clinic CONCLUSIONS Retail clinics can provide care for simple acute conditions and immunizations for a significant segment of the urban US population. PRIMARY FUNDING California Healthcare Foundation PMID:19721019

The new Waste Law: Challenging opportunity for future landfill operation in Indonesia.

PubMed

Meidiana, Christia; Gamse, Thomas

2011-01-01

The Waste Law No. 18/2008 Article 22 and 44 require the local governments to run environmentally sound landfill. Due to the widespread poor quality of waste management in Indonesia, this study aimed to identify the current situation by evaluating three selected landfills based on the ideal conditions of landfill practices, which are used to appraise the capability of local governments to adapt to the law. The results indicated that the local governments have problems of insufficient budget, inadequate equipment, uncollected waste and unplanned future landfill locations. All of the selected landfills were partially controlled landfills with open dumping practices predominating. In such inferior conditions the implementation of sanitary landfill is not necessarily appropriate. The controlled landfill is a more appropriate solution as it offers lower investment and operational costs, makes the selection of a new landfill site unnecessary and can operate with a minimum standard of infrastructure and equipment. The sustainability of future landfill capacity can be maintained by utilizing the old landfill as a profit-oriented landfill by implementing a landfill gas management or a clean development mechanism project. A collection fee system using the pay-as-you-throw principle could increase the waste income thereby financing municipal solid waste management.

42 CFR 482.51 - Condition of participation: Surgical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... applicable State laws and approved medical staff policies and procedures, LPNs and surgical technologists may... of medicine or osteopathy. (2) Licensed practical nurses (LPNs) and surgical technologists (operating... surgical care must be designed to assure the achievement and maintenance of high standards of medical...

Simple approach to superhydrophobic nanostructured Al for practical antifrosting application based on enhanced self-propelled jumping droplets.

PubMed

Kim, Aeree; Lee, Chan; Kim, Hyungmo; Kim, Joonwon

2015-04-08

Frost formation can cause operational difficulty and efficiency loss for many facilities such as aircraft, wind turbines, and outdoor heat exchangers. Self-propelled jumping by condensate droplets on superhydrophobic surfaces delays frost formation, so many attempts have been made to exploit this phenomenon. However, practical application of this phenomenon is currently unfeasible because many processes to fabricate the superhydrophobic surfaces are inefficient and because self-propelled jumping is difficult to be achieved in a humid and low-temperature environment because superhydrophobicity is degraded in these conditions. Here, we achieved significantly effective anti-icing superhydrophobic aluminum. Its extremely low adhesive properties allow self-propelled jumping under highly supersaturated conditions of high humidity or low surface temperature. As a result, this surface helps retard frost formation at that condition. The aluminum was made superhydrophobic by a simple and cost-effective process that is adaptable to any shape. Therefore, it has promise for use in practical and industrial applications.

Practical ultrasonic transducers for high-temperature applications using bismuth titanate and Ceramabind 830

NASA Astrophysics Data System (ADS)

Xu, Janet L.; Batista, Caio F. G.; Tittmann, Bernhard R.

2018-04-01

Structural health monitoring of large valve bodies in high-temperature environments such as power plants faces several limitations: commercial transducers are not rated for such high temperatures, gel couplants will evaporate, and measurements cannot be made in-situ. To solve this, we have furthered the work of Ledford in applying a practical transducer in liquid form which hardens and air dries directly onto the substrate. The transducer material is a piezoceramic film composed of bismuth titanate and a high-temperature binding agent, Ceramabind 830. The effects of several fabrication conditions were studied to optimize transducer performance and ensure repeatability. These fabrication conditions include humidity, binder ratio, water ratio, substrate roughness, and film thickness. The final product is stable for both reactive and non-reactive substrates, has a quick fabrication time, and has an operating temperature up to the Curie temperature of BIT, 650°C, well beyond the safe operating temperature of PZT (150°C).

Experience of disused source management in Latin America

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pimenta Mourao, R.

2008-07-01

The Centro de Desenvolvimento da Tecnologia Nuclear (Center for the Development of Nuclear Technology) - CDTN - has been actively engaged in cooperation programs for disused source management throughout the Latin American and the Caribbean region since 1996. The CDTN source conditioning team participated in the preparation of the technical procedures established for the different tasks involved in the radium sources conditioning operations, like preparation of the packaging for conditioning; sources conditioning; capsule welding; leak test in radium-containing capsule; and radiation protection planning for the conditioning of disused radium sources. The team also carried out twelve radium sources conditioning operationmore » in the region, besides in-house operations, which resulted in a total conditioned activity of approximately 525 GBq, or 14,200 mg of radium. Additionally, one operation was carried out in Nicaragua to safely condition three Cobalt teletherapy heads stored under very precarious conditions in the premises of an old hospital. More recently, the team started its participation in an IAEA- and US State Department-sponsored program for the repatriation of disused or excess transuranic sources presently stored at users' premises or under regulatory control in different countries in the region. In September 2007 the team attended a theoretical and practical training in transuranic sources management, including the participation in the conditioning of different neutron sources in certified packages. It is expected that the trained team will carry out similar operations in other Latin American countries. Finally, the team is expected be involved in the near future in the repatriation of US-origin teletherapy heads and industrial gauges. (authors)« less

Best practice guidelines for the operation of a donor human milk bank in an Australian NICU.

PubMed

Hartmann, B T; Pang, W W; Keil, A D; Hartmann, P E; Simmer, K

2007-10-01

Until the establishment of the PREM Bank (Perron Rotary Express Milk Bank) donor human milk banking had not occurred in Australia for the past 20 years. In re-establishing donor human milk banking in Australia, the focus of the PREM Bank has been to develop a formal and consistent approach to safety and quality in processing during the operation of the human milk bank. There is currently no existing legislation in Australia that specifically regulates the operation of donor human milk banks. For this reason the PREM Bank has utilised existing and internationally recognised management practices for managing hazards during food production. These tools (specifically HACCP) have been used to guide the development of Standard Operating Procedures and Good Manufacturing Practice for the screening of donors and processing of donor human milk. Donor screening procedures are consistent with those recommended by other human milk banks operating internationally, and also consistent with the requirements for blood and tissue donation in Australia. Controlled documentation and record keep requirements have also been developed that allow complete traceability from individual donation to individual feed dispensed to recipient and maintain a record of all processing and storage conditions. These operational requirements have been developed to reduce any risk associated with feeding pasteurised donor human milk to hospitalised preterm or ill infants to acceptable levels.

Electrophysiological CNS-processes related to associative learning in humans.

PubMed

Christoffersen, Gert R J; Schachtman, Todd R

2016-01-01

The neurophysiology of human associative memory has been studied with electroencephalographic techniques since the 1930s. This research has revealed that different types of electrophysiological processes in the human brain can be modified by conditioning: sensory evoked potentials, sensory induced gamma-band activity, periods of frequency-specific waves (alpha and beta waves, the sensorimotor rhythm and the mu-rhythm) and slow cortical potentials. Conditioning of these processes has been studied in experiments that either use operant conditioning or repeated contingent pairings of conditioned and unconditioned stimuli (classical conditioning). In operant conditioning, the appearance of a specific brain process is paired with an external stimulus (neurofeedback) and the feedback enables subjects to obtain varying degrees of control of the CNS-process. Such acquired self-regulation of brain activity has found practical uses for instance in the amelioration of epileptic seizures, Autism Spectrum Disorders (ASD) and Attention Deficit Hyperactivity Disorder (ADHD). It has also provided communicative means of assistance for tetraplegic patients through the use of brain computer interfaces. Both extra and intracortically recorded signals have been coupled with contingent external feedback. It is the aim for this review to summarize essential results on all types of electromagnetic brain processes that have been modified by classical or operant conditioning. The results are organized according to type of conditioned EEG-process, type of conditioning, and sensory modalities of the conditioning stimuli. Copyright © 2015 Elsevier B.V. All rights reserved.

A study on practical use of underwater abrasive water jet cutting

NASA Astrophysics Data System (ADS)

Yamaguchi, Hitoshi; Demura, Kenji

1993-09-01

The practicality of underwater abrasive water jet cutting technology was studied in experiments. A study of abrasives in slurried form showed that optimum polymer concentration can be selected to suit underwater conditions. For the long-distance transport of slurry from the ocean surface to the ocean floor, a direct supply system by hose proved to be practical. This system takes advantage of the insolubility of the slurry in water due to a difference in specific gravity. For cutting thick steel plate at great ocean depths, a simulation with a pressurized container revealed the requirements for actual cutting. Confirmation of remote cutting operations will become the most important technology in field applications. Underwater sound vibration characteristics were found to change significantly in direct response to modifications in cutting conditions. This will be important basic data to develop an effective sensoring method.

Impact of type of the roof rocks on location and range of endogenous fires particular hazard zone by in goaf with caving

NASA Astrophysics Data System (ADS)

Tutak, Magdalena; Brodny, Jarosław

2018-01-01

Hazard of endogenous fires is one of the basic and common presented occupational safety hazards in coal mine in Poland and in the world. This hazard means possibility of coal self-ignition as the result of its self-heating process in mining heading or its surrounding. In underground coal-mining during ventilating of operating longwalls takes place migration of parts of airflow to goaf with caving. In a case when in these goaf a coal susceptible to self-ignition occurs, then the airflow through these goaf may influence on formation of favorable conditions for coal oxidation and subsequently to its self-heating and self-ignition. Endogenous fire formed in such conditions can pose a serious hazards for the crew and for continuity of operation of mining plant. From the practical point of view a very significant meaning has determination of the zone in the goaf with caving, in which necessary conditions for occurence of endogenous fire are fulfilled. In the real conditions determination of such a zone is practically impossible. The main aim of the analysis was to determine the impact of type of the roof rocks forming the goaf on the location and range of endogenous fires particular hazard zone by in these goaf. For determined mining-geological conditions, the critical value of velocity of airflow and oxygen concentration in goaf, conditioning initiation of coal oxidation process were determined.

The flow field investigations of no load conditions in axial flow fixed-blade turbine

NASA Astrophysics Data System (ADS)

Yang, J.; Gao, L.; Wang, Z. W.; Zhou, X. Z.; Xu, H. X.

2014-03-01

During the start-up process, the strong instabilities happened at no load operation in a low head axial flow fixed-blade turbine, with strong pressure pulsation and vibration. The rated speed can not reach until guide vane opening to some extent, and stable operation could not be maintained under the rated speed at some head, which had a negative impact on the grid-connected operation of the unit. In order to find the reason of this phenomenon, the unsteady flow field of the whole flow passage at no load conditions was carried out to analyze the detailed fluid field characteristics including the pressure pulsation and force imposed on the runner under three typical heads. The main hydraulic cause of no load conditions instability was described. It is recommended that the power station should try to reduce the no-load running time and go into the high load operation as soon as possible when connected to grid at the rated head. Following the recommendations, the plant operation practice proved the unstable degree of the unit was reduced greatly during start up and connect to the power grid.

Data-Mining Toolset Developed for Determining Turbine Engine Part Life Consumption

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.

2003-01-01

The current practice in aerospace turbine engine maintenance is to remove components defined as life-limited parts after a fixed time, on the basis of a predetermined number of flight cycles. Under this schedule-based maintenance practice, the worst-case usage scenario is used to determine the usable life of the component. As shown, this practice often requires removing a part before its useful life is fully consumed, thus leading to higher maintenance cost. To address this issue, the NASA Glenn Research Center, in a collaborative effort with Pratt & Whitney, has developed a generic modular toolset that uses data-mining technology to parameterize life usage models for maintenance purposes. The toolset enables a "condition-based" maintenance approach, where parts are removed on the basis of the cumulative history of the severity of operation they have experienced. The toolset uses data-mining technology to tune life-consumption models on the basis of operating and maintenance histories. The flight operating conditions, represented by measured variables within the engine, are correlated with repair records for the engines, generating a relationship between the operating condition of the part and its service life. As shown, with the condition-based maintenance approach, the lifelimited part is in service until its usable life is fully consumed. This approach will lower maintenance costs while maintaining the safety of the propulsion system. The toolset is a modular program that is easily customizable by users. First, appropriate parametric damage accumulation models, which will be functions of engine variables, must be defined. The tool then optimizes the models to match the historical data by computing an effective-cycle metric that reduces the unexplained variability in component life due to each damage mode by accounting for the variability in operational severity. The damage increment due to operating conditions experienced during each flight is used to compute the effective cycles and ultimately the replacement time. Utilities to handle data problems, such as gaps in the flight data records, are included in the toolset. The tool was demonstrated using the first stage, high-pressure turbine blade of the PW4077 engine (Pratt & Whitney, East Hartford, CT). The damage modes considered were thermomechanical fatigue and oxidation/erosion. Each PW4077 engine contains 82 first-stage, high-pressure turbine blades, and data from a fleet of engines were used to tune the life-consumption models. The models took into account not only measured variables within the engine, but also unmeasured variables such as engine health parameters that are affected by degradation of the engine due to aging. The tool proved effective at predicting the average number of blades scrapped over time due to each damage mode, per engine, given the operating history of the engine. The customizable tools are available to interested parties within the aerospace community.

Current good manufacturing practice in manufacturing, processing, packing, or holding of drugs; revision of certain labeling controls--FDA. Final rule.

PubMed

1993-08-03

The Food and Drug Administration (FDA) is amending the current good manufacturing practice (CGMP) regulations for human and veterinary drug products to revise certain labeling control provisions. Specifically, the final rule defines the term "gang-printed labeling," specifies conditions for the use of gang-printed or cut labeling, exempts manufacturers that employ automated 100-percent labeling inspection systems from CGMP labeling reconciliation requirements, and requires manufacturers to identify filled drug product containers that are set aside and held in an unlabeled condition for future labeling operations. These changes are intended to reduce the frequency of drug product mislabeling and associated drug product recalls.

76 FR 18294 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... learns the condition of operating rules and practices with respect to trains and instructions provided by... Existing On-Track Roadway Maintenance Machines Conforming with Paragraph (a) of This Section. 214.507... stencils. Maintenance Machine (RMM). 214.511--Clearly Identifiable 644 railroads...... 3,700 identified 5...

Practical Guide to HVAC for Schools.

ERIC Educational Resources Information Center

ASHRAE Journal, 1998

1998-01-01

Features six articles on heating, ventilation, and air-conditioning systems for schools. Examines how to avoid air temperature complaints when choosing a system; special system features; engineers, indoor air quality, and schools; mechanical systems noise in classrooms; operation and management issues related to design; and details on bids and…

"We can see a future here": Place attachment, professional identity, and forms of capital mobilized to deliver medical education in an underserviced area.

PubMed

Hanlon, Neil; Halseth, Greg; Snadden, David

2010-09-01

Community-integrated undergraduate medical education is becoming a more common option for students predisposed to practice in rural and small town places. One such initiative, the Northern Medical Program, has been operating since 2004 in the northern interior of British Columbia, Canada. The NMP's curriculum relies heavily on the involvement of practicing physicians in its host community, Prince George. Drawing on Bourdieu's conceptualization of capital in its different forms, the commitment of the local physician community is understood as social capital derived from cultural capital centred on a collective sense of professional identity forged by conditions of practice in an underserviced area. The findings of this study are discussed with respect to the long-term operation and success of community-integrated medical education programs. Copyright 2010 Elsevier Ltd. All rights reserved.

Appropriate technology for domestic wastewater management in under-resourced regions of the world

NASA Astrophysics Data System (ADS)

Oladoja, Nurudeen Abiola

2017-11-01

Centralized wastewater management system is the modern day waste management practice, but the high cost and stringent requirements for the construction and operation have made it less attractive in the under-resourced regions of the world. Considering these challenges, the use of decentralized wastewater management system, on-site treatment system, as an appropriate technology for domestic wastewater treatment is hereby advocated. Adopting this technology helps save money, protects home owners' investment, promotes better watershed management, offers an appropriate solution for low-density communities, provides suitable alternatives for varying site conditions and furnishes effective solutions for ecologically sensitive areas. In the light of this, an overview of the on-site treatment scheme, at the laboratory scale, pilot study stage, and field trials was conducted to highlight the operational principles' strength and shortcomings of the scheme. The operational requirements for the establishing and operation of the scheme and best management practice to enhance the performance and sustenance were proffered.

High duty cycle inverse Compton scattering X-ray source

DOE PAGES

Ovodenko, A.; Agustsson, R.; Babzien, M.; ...

2016-12-22

Inverse Compton Scattering (ICS) is an emerging compact X-ray source technology, where the small source size and high spectral brightness are of interest for multitude of applications. However, to satisfy the practical flux requirements, a high-repetition-rate ICS system needs to be developed. To this end, this article reports the experimental demonstration of a high peak brightness ICS source operating in a burst mode at 40 MHz. A pulse train interaction has been achieved by recirculating a picosecond CO 2 laser pulse inside an active optical cavity synchronized to the electron beam. The pulse train ICS performance has been characterized atmore » 5- and 15- pulses per train and compared to a single pulse operation under the same operating conditions. Lastly, with the observed near-linear X-ray photon yield gain due to recirculation, as well as noticeably higher operational reliability, the burst-mode ICS offers a great potential for practical scalability towards high duty cycles.« less

Adaptive change in corporate control practices.

PubMed

Alexander, J A

1991-03-01

Multidivisional organizations are not concerned with what structure to adopt but with how they should exercise control within the divisional form to achieve economic efficiencies. Using an information-processing framework, I examined control arrangements between the headquarters and operating divisions of such organizations and how managers adapted control practices to accommodate increasing environmental uncertainty. Also considered were the moderating effects of contextual attributes on such adaptive behavior. Analyses of panel data from 97 multihospital systems suggested that organizations generally practice selective decentralization under conditions of increasing uncertainty but that organizational age, dispersion, and initial control arrangements significantly moderate the direction and magnitude of such changes.

Research on numerical simulation and protection of transient process in long-distance slurry transportation pipelines

NASA Astrophysics Data System (ADS)

Lan, G.; Jiang, J.; Li, D. D.; Yi, W. S.; Zhao, Z.; Nie, L. N.

2013-12-01

The calculation of water-hammer pressure phenomenon of single-phase liquid is already more mature for a pipeline of uniform characteristics, but less research has addressed the calculation of slurry water hammer pressure in complex pipelines with slurry flows carrying solid particles. In this paper, based on the developments of slurry pipelines at home and abroad, the fundamental principle and method of numerical simulation of transient processes are presented, and several boundary conditions are given. Through the numerical simulation and analysis of transient processes of a practical engineering of long-distance slurry transportation pipeline system, effective protection measures and operating suggestions are presented. A model for calculating the water impact of solid and fluid phases is established based on a practical engineering of long-distance slurry pipeline transportation system. After performing a numerical simulation of the transient process, analyzing and comparing the results, effective protection measures and operating advice are recommended, which has guiding significance to the design and operating management of practical engineering of longdistance slurry pipeline transportation system.

Insights into managed care--operational, legal and actuarial.

PubMed

Melek, S P; Johnson, B A; Schryver, D

1997-01-01

Understanding the operational, legal and actuarial dimensions of managed care is essential to developing managed care contracts between managed care organizations and individual health care providers or groups such as provider-sponsored organizations or independent practice associations. Operationally, it is important to understand managed care and its trends, emphasizing business issues, knowing your practice and defining acceptable levels of reimbursement and risk. Legally, there are a number of common themes or issues relevant to all managed care contracts, including primary care vs. specialist contracts, services offered, program policies and procedures, utilization review, physician reimbursement and compensation, payment schedule, terms and conditions, term and termination, continuation of care requirements, indemnification, amendment of contract and program policies, and stop-loss insurance. Actuarial issues include membership, geography, age-gender distribution, degree of health care management, local managed care utilization levels, historical utilization levels, health plan benefit design, among others.

How do operating conditions affect As(III) removal by iron electrocoagulation?

PubMed

Delaire, Caroline; Amrose, Susan; Zhang, Minghui; Hake, James; Gadgil, Ashok

2017-04-01

Iron electrocoagulation (Fe-EC) has been shown to effectively remove arsenic from contaminated groundwater at low cost and has the potential to improve access to safe drinking water for millions of people. Understanding how operating conditions, such as the Fe dosage rate and the O 2 recharge rate, affect arsenic removal at different pH values is crucial to maximize the performance of Fe-EC under economic constraints. In this work, we improved upon an existing computational model to investigate the combined effects of pH, Fe dosage rate, and O 2 recharge rate on arsenic removal in Fe-EC. We showed that the impact of the Fe dosage rate strongly depends on pH and on the O 2 recharge rate, which has important practical implications. We identified the process limiting arsenic removal (As(III) oxidation versus As(V) adsorption) at different pH values, which allowed us to interpret the effect of operating conditions on Fe-EC performance. Finally, we assessed the robustness of the trends predicted by the model, which assumes a constant pH, against lab experiments reproducing more realistic conditions where pH is allowed to drift during treatment as a result of equilibration with atmospheric CO 2 . Our results provide a nuanced understanding of how operating conditions impact arsenic removal by Fe-EC and can inform decisions regarding the operation of this technology in a range of groundwaters. Copyright © 2017 Elsevier Ltd. All rights reserved.

Site remediation techniques in India: a review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anomitra Banerjee; Miller Jothi

India is one of the developing countries operating site remediation techniques for the entire nuclear fuel cycle waste for the last three decades. In this paper we intend to provide an overview of remediation methods currently utilized at various hazardous waste sites in India, their advantages and disadvantages. Over the years the site remediation techniques have been well characterized and different processes for treatment, conditioning and disposal are being practiced. Remediation Methods categorized as biological, chemical or physical are summarized for contaminated soils and environmental waters. This paper covers the site remediation techniques implemented for treatment and conditioning of wastelandsmore » arising from the operation of nuclear power plant, research reactors and fuel reprocessing units. (authors)« less

Laminar Flow Control Leading Edge Systems in Simulated Airline Service

NASA Technical Reports Server (NTRS)

Wagner, R. D.; Maddalon, D. V.; Fisher, D. F.

1988-01-01

Achieving laminar flow on the wings of a commercial transport involves difficult problems associated with the wing leading edge. The NASA Leading Edge Flight Test Program has made major progress toward the solution of these problems. The effectiveness and practicality of candidate laminar flow leading edge systems were proven under representative airline service conditions. This was accomplished in a series of simulated airline service flights by modifying a JetStar aircraft with laminar flow leading edge systems and operating it out of three commercial airports in the United States. The aircraft was operated as an airliner would under actual air traffic conditions, in bad weather, and in insect infested environments.

Progress toward an advanced condition monitoring system for reusable rocket engines

NASA Technical Reports Server (NTRS)

Maram, J.; Barkhoudarian, S.

1987-01-01

A new generation of advanced sensor technologies will allow the direct measurement of critical/degradable rocket engine components' health and the detection of degraded conditions before component deterioration affects engine performance, leading to substantial improvements in reusable engines' operation and maintenance. When combined with a computer-based engine condition-monitoring system, these sensors can furnish a continuously updated data base for the prediction of engine availability and advanced warning of emergent maintenance requirements. Attention is given to the case of a practical turbopump and combustion device diagnostic/prognostic health-monitoring system.

SICONID: a FORTRAN-77 program for conditional simulation in one dimension

NASA Astrophysics Data System (ADS)

Pardo-Igúzquiza, E.; Chica-Olmo, M.; Delgado-García, J.

1992-07-01

The SICONID program, written in FORTRAN 77 for the conditional simulation of geological variables in one dimension, is presented. The program permits all the necessary steps to obtain a simulated series of the experimental data to be carried out. These states are: acquisition of the experimental values, modelization of the anamorphosis function, variogram of the normal scores, conditional simulation, and restoration of the experimental histogram. A practical case of simulation of the evolution of the groundwater level in a survey to show the operation of the program is given.

A practicable process for phenol removal with liquid surfactant membrane permeation column

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kataoka, Takeshi; Osaki, Katsuhiko; Nishiki, Tadaaki

1997-05-01

A practicable liquid surfactant membrane process for phenol removal is proposed with a stirred countercurrent column used as the liquid membrane contact equipment. The constituents of liquid membranes, such as internal aqueous phase and surfactant, the type of column, and the operating conditions for efficient and continuous performance of the liquid surfactant membrane process, have been examined. When NaOH solution was used as the internal aqueous phase and ECA4360J was used as the surfactant, the W/O emulsion was stable for the duration of column operation. More than 97% phenol could be removed from the feed solution. Nearly complete demulsification wasmore » also achieved by gentle agitation with an electrostatic demulsifier.« less

Optical Fiber Sensors for Aircraft Structural Health Monitoring

PubMed Central

García, Iker; Zubia, Joseba; Durana, Gaizka; Aldabaldetreku, Gotzon; Illarramendi, María Asunción; Villatoro, Joel

2015-01-01

Aircraft structures require periodic and scheduled inspection and maintenance operations due to their special operating conditions and the principles of design employed to develop them. Therefore, structural health monitoring has a great potential to reduce the costs related to these operations. Optical fiber sensors applied to the monitoring of aircraft structures provide some advantages over traditional sensors. Several practical applications for structures and engines we have been working on are reported in this article. Fiber Bragg gratings have been analyzed in detail, because they have proved to constitute the most promising technology in this field, and two different alternatives for strain measurements are also described. With regard to engine condition evaluation, we present some results obtained with a reflected intensity-modulated optical fiber sensor for tip clearance and tip timing measurements in a turbine assembled in a wind tunnel. PMID:26134107

Optical Fiber Sensors for Aircraft Structural Health Monitoring.

PubMed

García, Iker; Zubia, Joseba; Durana, Gaizka; Aldabaldetreku, Gotzon; Illarramendi, María Asunción; Villatoro, Joel

2015-06-30

Aircraft structures require periodic and scheduled inspection and maintenance operations due to their special operating conditions and the principles of design employed to develop them. Therefore, structural health monitoring has a great potential to reduce the costs related to these operations. Optical fiber sensors applied to the monitoring of aircraft structures provide some advantages over traditional sensors. Several practical applications for structures and engines we have been working on are reported in this article. Fiber Bragg gratings have been analyzed in detail, because they have proved to constitute the most promising technology in this field, and two different alternatives for strain measurements are also described. With regard to engine condition evaluation, we present some results obtained with a reflected intensity-modulated optical fiber sensor for tip clearance and tip timing measurements in a turbine assembled in a wind tunnel.

Forest structure following tornado damage and salvage logging in northern Maine, USA

Treesearch

Shawn Fraver; Kevin J. Dodds; Laura S. Kenefic; Rick Morrill; Robert S. Seymour; Eben Sypitkowski

2017-01-01

Understanding forest structural changes resulting from postdisturbance management practices such as salvage logging is critical for predicting forest recovery and developing appropriate management strategies. In 2013, a tornado and subsequent salvage operations in northern Maine, USA, created three conditions (i.e., treatments) with contrasting forest structure:...

The application of elastohydrodynamic lubrication in gear tooth contacts

NASA Technical Reports Server (NTRS)

Townsend, D. P.

1972-01-01

An analytical method is presented for determining elastohydrodynamic film thickness in gears from theory and how the film affects gear failure and life. The practical aspects of gear lubrication are presented, including mechanical and service variables which must be considered to obtain optimum gear performance under severe operating conditions.

Test and Evaluation Project No. 28: Anti-icing Technology, Field Evaluation Report

DOT National Transportation Integrated Search

1998-03-01

The report provides a detailed glimpse at the state-of-the-art of U.S. anti-icing operations, and simultaneous road and weather conditions, prior to the 1996 publication of the anti-icing Manual of Practice. It will be useful to those who wish to exa...

A practical solar energy heating and cooling system

NASA Technical Reports Server (NTRS)

Oneill, M. J.; Mcdanal, A. J.; Sims, W. H.

1973-01-01

Recent study has concluded that solar-powered residential heating and cooling system is non technically and economically feasible. Proposed system provides space heating, air conditioning, and hot water. Installation costs will be greater than for conventional heating systems, but this difference will eventually be defrayed by very low operating costs.

From Operations to Teaching and Learning

ERIC Educational Resources Information Center

Copland, Michael A.; Honig, Meredith I.

2010-01-01

For central offices to become full partners with schools in improving teaching and learning, simply defining new roles or creating new reporting structures is not enough. Through the authors' recent central-office research, they have confirmed that creating the conditions for improved teaching and learning districtwide demands new practices within…

21 CFR 110.20 - Plant and grounds.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD Buildings and... operator shall be kept in a condition that will protect against the contamination of food. The methods for..., yards, and parking lots so that they do not constitute a source of contamination in areas where food is...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

Optimization of the operating conditions of gas-turbine power stations considering the effect of equipment deterioration

NASA Astrophysics Data System (ADS)

Aminov, R. Z.; Kozhevnikov, A. I.

2017-10-01

In recent years in most power systems all over the world, a trend towards the growing nonuniformity of energy consumption and generation schedules has been observed. The increase in the portion of renewable energy sources is one of the important challenges for many countries. The ill-predictable character of such energy sources necessitates a search for practical solutions. Presently, the most efficient method for compensating for nonuniform generation of the electric power by the renewable energy sources—predominantly by the wind and solar energy—is generation of power at conventional fossil-fuel-fired power stations. In Russia, this problem is caused by the increasing portion in the generating capacity structure of the nuclear power stations, which are most efficient when operating under basic conditions. Introduction of hydropower and pumped storage hydroelectric power plants and other energy-storage technologies does not cover the demand for load-following power capacities. Owing to a simple design, low construction costs, and a sufficiently high economic efficiency, gas turbine plants (GTPs) prove to be the most suitable for covering the nonuniform electric-demand schedules. However, when the gas turbines are operated under varying duty conditions, the lifetime of the primary thermostressed components is considerably reduced and, consequently, the repair costs increase. A method is proposed for determination of the total operating costs considering the deterioration of the gas turbine equipment under varying duty and start-stop conditions. A methodology for optimization of the loading modes for the gas turbine equipment is developed. The consideration of the lifetime component allows varying the optimal operating conditions and, in some cases, rejecting short-time stops of the gas turbine plants. The calculations performed in a wide range of varying fuel prices and capital investments per gas turbine equipment unit show that the economic effectiveness can be increased by 5-15% by varying the operating conditions and switching to the optimal operating modes. Consequently, irrespective of the fuel price, the application of the proposed method results in selection of the most beneficial operating conditions. Consideration of the lifetime expenditure included in the optimization criterion enables enhancement of the operating efficiency.

Criteria for the assessment of analyser practicability

PubMed Central

Biosca, C.; Galimany, R.

1993-01-01

This article lists the theoretical criteria that need to be considered to assess the practicability of an automatic analyser. Two essential sets of criteria should be taken into account when selecting an automatic analyser: ‘reliability’ and ‘practicability’. Practibility covers the features that provide information about the suitability of an analyser for specific working conditions. These practibility criteria are classsified in this article and include the environment; work organization; versatility and flexibility; safely controls; staff training; maintenance and operational costs. PMID:18924972

INTERNATIONAL REPORT: Practical realization of the definition of the metre, including recommended radiations of other optical frequency standards (2003)

NASA Astrophysics Data System (ADS)

Felder, R.

2005-08-01

In 2003, the International Committee for Weights and Measures (CIPM) recommended updated values of the frequency for certain optical frequency standards recommended for the practical realization of the definition of the metre. The text of this CIPM Recommendation and details of the updated radiations are given here. The complete updated set of recommended radiations, including frequencies, wavelengths, uncertainties and operating conditions where appropriate, is available on the BIPM website.

Isokinetic TWC Evaporator Probe: Calculations and Systemic Uncertainty Analysis

NASA Technical Reports Server (NTRS)

Davison, Craig R.; Strapp, J. Walter; Lilie, Lyle; Ratvasky, Thomas P.; Dumont, Christopher

2016-01-01

A new Isokinetic Total Water Content Evaporator (IKP2) was downsized from a prototype instrument, specifically to make airborne measurements of hydrometeor total water content (TWC) in deep tropical convective clouds to assess the new ice crystal Appendix D icing envelope. The probe underwent numerous laboratory and wind tunnel investigations to ensure reliable operation under the difficult high altitude/speed/TWC conditions under which other TWC instruments have been known to either fail, or have unknown performance characteristics and the results are presented in a companion paper. This paper presents the equations used to determine the total water content (TWC) of the sampled atmosphere from the values measured by the IKP2 or necessary ancillary data from other instruments. The uncertainty in the final TWC is determined by propagating the uncertainty in the measured values through the calculations to the final result. Two techniques were used and the results compared. The first is a typical analytical method of propagating uncertainty and the second performs a Monte Carlo simulation. The results are very similar with differences that are insignificant for practical purposes. The uncertainty is between 2 percent and 3 percent at most practical operating conditions. The capture efficiency of the IKP2 was also examined based on a computational fluid dynamic simulation of the original IKP and scaled down to the IKP2. Particles above 24 microns were found to have a capture efficiency greater than 99 percent at all operating conditions.

Isokinetic TWC Evaporator Probe: Calculations and Systemic Uncertainty Analysis

NASA Technical Reports Server (NTRS)

Davison, Craig R.; Strapp, John W.; Lilie, Lyle E.; Ratvasky, Thomas P.; Dumont, Christopher

2016-01-01

A new Isokinetic Total Water Content Evaporator (IKP2) was downsized from a prototype instrument, specifically to make airborne measurements of hydrometeor total water content (TWC) in deep tropical convective clouds to assess the new ice crystal Appendix D icing envelope. The probe underwent numerous laboratory and wind tunnel investigations to ensure reliable operation under the difficult high altitude/speed/TWC conditions under which other TWC instruments have been known to either fail, or have unknown performance characteristics and the results are presented in a companion paper (Ref. 1). This paper presents the equations used to determine the total water content (TWC) of the sampled atmosphere from the values measured by the IKP2 or necessary ancillary data from other instruments. The uncertainty in the final TWC is determined by propagating the uncertainty in the measured values through the calculations to the final result. Two techniques were used and the results compared. The first is a typical analytical method of propagating uncertainty and the second performs a Monte Carlo simulation. The results are very similar with differences that are insignificant for practical purposes. The uncertainty is between 2 and 3 percent at most practical operating conditions. The capture efficiency of the IKP2 was also examined based on a computational fluid dynamic simulation of the original IKP and scaled down to the IKP2. Particles above 24 micrometers were found to have a capture efficiency greater than 99 percent at all operating conditions.

Experimental investigation of practical unforgeable quantum money

NASA Astrophysics Data System (ADS)

Bozzio, Mathieu; Orieux, Adeline; Trigo Vidarte, Luis; Zaquine, Isabelle; Kerenidis, Iordanis; Diamanti, Eleni

2018-01-01

Wiesner's unforgeable quantum money scheme is widely celebrated as the first quantum information application. Based on the no-cloning property of quantum mechanics, this scheme allows for the creation of credit cards used in authenticated transactions offering security guarantees impossible to achieve by classical means. However, despite its central role in quantum cryptography, its experimental implementation has remained elusive because of the lack of quantum memories and of practical verification techniques. Here, we experimentally implement a quantum money protocol relying on classical verification that rigorously satisfies the security condition for unforgeability. Our system exploits polarization encoding of weak coherent states of light and operates under conditions that ensure compatibility with state-of-the-art quantum memories. We derive working regimes for our system using a security analysis taking into account all practical imperfections. Our results constitute a major step towards a real-world realization of this milestone protocol.

Numerical modelling of multi-vane expander operating conditions in ORC system

NASA Astrophysics Data System (ADS)

Rak, Józef; Błasiak, Przemysław; Kolasiński, Piotr

2017-11-01

Multi-vane expanders are positive displacement volumetric machines which are nowadays considered for application in micro-power domestic ORC systems as promising alternative to micro turbines and other volumetric expanders. The multi-vane expander features very simple design, low gas flow capacity, low expansion ratios, an advantageous ratio of the power output to the external dimensions and are insensitive to the negative influence of the gas-liquid mixture expansion. Moreover, the multi-vane expander can be easily hermetically sealed, which is one of the key issues in the ORC system design. A literature review indicates that issues concerning the application of multi-vane expanders in such systems, especially related to operating of multi-vane expander with different low-boiling working fluids, are innovative, not fully scientifically described and have the potential for practical implementation. In this paper the results of numerical investigations on multi-vane expander operating conditions are presented. The analyses were performed on three-dimensional numerical model of the expander in ANSYS CFX software. The numerical model of the expander was validated using the data obtained from the experiment carried out on a lab test-stand. Then a series of computational analysis were performed using expanders' numerical model in order to determine its operating conditions under various flow conditions of different working fluids.

Evaluating operating conditions for outcompeting nitrite oxidizers and maintaining partial nitrification in biofilm systems using biofilm modeling and Monte Carlo filtering.

PubMed

Brockmann, D; Morgenroth, E

2010-03-01

In practice, partial nitrification to nitrite in biofilms has been achieved with a range of different operating conditions, but mechanisms resulting in reliable partial nitrification in biofilms are not well understood. In this study, mathematical biofilm modeling combined with Monte Carlo filtering was used to evaluate operating conditions that (1) lead to outcompetition of nitrite oxidizers from the biofilm, and (2) allow to maintain partial nitrification during long-term operation. Competition for oxygen was found to be the main mechanism for displacing nitrite oxidizers from the biofilm, and preventing re-growth of nitrite oxidizers in the long-term. To maintain partial nitrification in the model, a larger oxygen affinity (i.e., smaller half saturation constant) for ammonium oxidizers compared to nitrite oxidizers was required, while the difference in maximum growth rate was not important for competition under steady state conditions. Thus, mechanisms for washout of nitrite oxidizing bacteria from biofilms are different from suspended cultures where the difference in maximum growth rate is a key mechanism. Inhibition of nitrite oxidizers by free ammonia was not required to outcompete nitrite oxidizers from the biofilm, and to maintain partial nitrification to nitrite. But inhibition by free ammonia resulted in faster washout of nitrite oxidizers. Copyright 2009 Elsevier Ltd. All rights reserved.

Forecast of jet engine exhaust emissions for future high altitude commercial aircraft

NASA Technical Reports Server (NTRS)

Grobman, J.; Ingebo, R. D.

1974-01-01

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are presented. The forecasts are based on: (1) current knowledge of emission characteristics of combustors and augmentors; (2) the current status of combustion research in emission reduction technology; (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft. Results are presented for cruise conditions in terms of an emission index, g pollutant/kg fuel. Two sets of engine exhaust emission predictions are presented: the first, based on an independent NASA study and the second, based on the consensus of an ad hoc committee composed of industry, university, and government representatives. The consensus forecasts are in general agreement with the NASA forecasts.

Forecast of jet engine exhaust emissions for future high altitude commercial aircraft

NASA Technical Reports Server (NTRS)

Grobman, J.; Ingebo, R. D.

1974-01-01

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are presented. The forecasts are based on: (1) current knowledge of emission characteristics of combustors and augmentors; (2) the current status of combustion research in emission reduction technology; and (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft. Results are presented for cruise conditions in terms of an emission index, g pollutant/kg fuel. Two sets of engine exhaust emission predictions are presented: the first, based on an independent NASA study and the second, based on the consensus of an ad hoc committee composed of industry, university, and government representatives. The consensus forecasts are in general agreement with the NASA forecasts.

Managing Safety and Operations: The Effect of Joint Management System Practices on Safety and Operational Outcomes.

PubMed

Tompa, Emile; Robson, Lynda; Sarnocinska-Hart, Anna; Klassen, Robert; Shevchenko, Anton; Sharma, Sharvani; Hogg-Johnson, Sheilah; Amick, Benjamin C; Johnston, David A; Veltri, Anthony; Pagell, Mark

2016-03-01

The aim of this study was to determine whether management system practices directed at both occupational health and safety (OHS) and operations (joint management system [JMS] practices) result in better outcomes in both areas than in alternative practices. Separate regressions were estimated for OHS and operational outcomes using data from a survey along with administrative records on injuries and illnesses. Organizations with JMS practices had better operational and safety outcomes than organizations without these practices. They had similar OHS outcomes as those with operations-weak practices, and in some cases, better outcomes than organizations with safety-weak practices. They had similar operational outcomes as those with safety-weak practices, and better outcomes than those with operations-weak practices. Safety and operations appear complementary in organizations with JMS practices in that there is no penalty for either safety or operational outcomes.

Ab initio thermodynamic approach to identify mixed solid sorbents for CO 2 capture technology

DOE PAGES

Duan, Yuhua

2015-10-15

Because the current technologies for capturing CO 2 are still too energy intensive, new materials must be developed that can capture CO 2 reversibly with acceptable energy costs. At a given CO 2 pressure, the turnover temperature (T t) of the reaction of an individual solid that can capture CO 2 is fixed. Such T t may be outside the operating temperature range (ΔT o) for a practical capture technology. To adjust T t to fit the practical ΔT o, in this study, three scenarios of mixing schemes are explored by combining thermodynamic database mining with first principles density functionalmore » theory and phonon lattice dynamics calculations. Our calculated results demonstrate that by mixing different types of solids, it’s possible to shift T t to the range of practical operating temperature conditions. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO 2 capture reactions by the mixed solids of interest, we were able to identify the mixing ratios of two or more solids to form new sorbent materials for which lower capture energy costs are expected at the desired pressure and temperature conditions.« less

Desert RATS 2011: Near-Earth Asteroid Human Exploration Operations

NASA Technical Reports Server (NTRS)

Abercromby, Andrew; Gernhardt, Michael L.; Chappel, Steve

2012-01-01

The Desert Research and Technology Studies (D-RATS) 2011 field test involved the planning and execution of a series of exploration scenarios under operational conditions similar to those that would be expected during a human exploration mission to a near-Earth asteroid (NEA). The focus was on understanding the operations tempo during simulated NEA exploration and the implications of communications latency and limited data bandwidth. Anchoring technologies and sampling techniques were not evaluated due to the immaturity of those technologies and the inability to meaningfully test them at D-RATS. Reduced gravity analogs and simulations are being used to fully evaluate Multi-Mission Space Exploration Vehicle (MMSEV) and extravehicular (EVA) operations and interactions in near-weightlessness at a NEA as part of NASA s integrated analogs program. Hypotheses were tested by planning and performing a series of 1-day simulated exploration excursions comparing test conditions all of which involved a single Deep Space Habitat (DSH) and either zero, one, or two MMSEVs; three or four crewmembers; one of two different communications bandwidths; and a 100-second roundtrip communications latency between the field site and Houston. Excursions were executed at the Black Point Lava Flow test site with a Mission Control Center and Science Support Room at Johnson Space Center (JSC) being operated with 100-second roundtrip communication latency to the field. Crews were composed of astronauts and professional field geologists and teams of Mission Operations, Science, and Education & Public Outreach (EPO) experts also supported the mission simulations each day. Data were collected separately from the Crew, Mission Operations, Science, and EPO teams to assess the test conditions from multiple perspectives. For the operations tested, data indicates practically significant benefits may be realized by including at least one MMSEV and by including 4 versus 3 crewmembers in the NEA exploration architecture as measured by increased Scientific Data Quality, EVA Exploration Time, Capability Assessment Ratings, and Overall Acceptability ratings by Crew, Mission Operations, Science, and Education & Public Outreach teams. A combination of text and voice was used to effectively communicate over the 100-second roundtrip communications latency and increased communication bandwidth yielded a small but practically significant improvement in Overall Acceptability as rated by the Science team, although the impact of bandwidth on scientific strategic planning was not assessed. No effect of increased bandwidth was observed with respect to Crew, Mission Operations, or EPO team ratings of Overall Acceptability.

Conventional Anchor Test Results at San Diego and Indian Island

DTIC Science & Technology

1980-07-01

operational practicality of using the Stockless anchor with welded open flukes, since tests have indicated higher capac- ities for the anchor with...Tests (Ref 1) of the Stockless anchor in mud with flukes free-swinging and with flukes welded open show significant increase.s in efficiency for the...latter condition, 4 versus 2, indicating that the anchor flukes did not open completely or at all for the free swinging (usual) condition. Towne (Ref 1

Operant conditioning-based behavior modification: one approach to treating somatic disorders.

PubMed

LeBow, M D

1975-01-01

The applicability of behavior modification as a process for treating somatic difficulties is examined within the framework of measurement, modification, and evaluation. Illustrations of this process are presented throughout. In particular, the last section of the paper gives an example of a currently operative and multifaceted approach to the problem of obesity. Among the topics considered herein are the use of behavioral contracts that specify ameliorative weight reduction practices and the assessment as well as manipulation of eating speed.

Fuzzy simulation in concurrent engineering

NASA Technical Reports Server (NTRS)

Kraslawski, A.; Nystrom, L.

1992-01-01

Concurrent engineering is becoming a very important practice in manufacturing. A problem in concurrent engineering is the uncertainty associated with the values of the input variables and operating conditions. The problem discussed in this paper concerns the simulation of processes where the raw materials and the operational parameters possess fuzzy characteristics. The processing of fuzzy input information is performed by the vertex method and the commercial simulation packages POLYMATH and GEMS. The examples are presented to illustrate the usefulness of the method in the simulation of chemical engineering processes.

Operation and challenges of home-based medical practices in the US: findings from six aggregated case studies.

PubMed

Norman, Gregory J; Orton, Kristann; Wade, Amy; Morris, Andrea M; Slaboda, Jill C

2018-01-27

Home-based primary care (HBPC) is a multidisciplinary, ongoing care strategy that can provide cost-effective, in-home treatment to meet the needs of the approximately four million homebound, medically complex seniors in the U.S. Because there is no single model of HBPC that can be adopted across all types of health organizations and U.S. geographic regions, we conducted a six-site HBPC practice assessment to better understand different operation structures, common challenges, and approaches to delivering HBPC. Six practices varying in size, care team composition and location agreed to participate. At each site we conducted unstructured interviews with key informants and directly observed practices and procedures in the field and back office. The aggregated case studies revealed important issues focused on team composition, patient characteristics, use of technology and urgent care delivery. Common challenges across the practices included provider retention and unmet community demand for home-based care services. Most practices, regardless of size, faced challenges around using electronic medical records (EMRs) and scheduling systems not designed for use in a mobile practice. Although many practices offered urgent care, practices varied in the methods used to provide care including the use of community paramedics and telehealth technology. Learnings compiled from these observations can inform other HBPC practices as to potential best practices that can be implemented in an effort to improve efficiency and scalability of HBPC so that seniors with multiple chronic conditions can receive comprehensive primary care services in their homes.

Energy efficiency in membrane bioreactors.

PubMed

Barillon, B; Martin Ruel, S; Langlais, C; Lazarova, V

2013-01-01

Energy consumption remains the key factor for the optimisation of the performance of membrane bioreactors (MBRs). This paper presents the results of the detailed energy audits of six full-scale MBRs operated by Suez Environnement in France, Spain and the USA based on on-site energy measurement and analysis of plant operation parameters and treatment performance. Specific energy consumption is compared for two different MBR configurations (flat sheet and hollow fibre membranes) and for plants with different design, loads and operation parameters. The aim of this project was to understand how the energy is consumed in MBR facilities and under which operating conditions, in order to finally provide guidelines and recommended practices for optimisation of MBR operation and design to reduce energy consumption and environmental impacts.

Aspects of Synthetic Vision Display Systems and the Best Practices of the NASA's SVS Project

NASA Technical Reports Server (NTRS)

Bailey, Randall E.; Kramer, Lynda J.; Jones, Denise R.; Young, Steven D.; Arthur, Jarvis J.; Prinzel, Lawrence J.; Glaab, Louis J.; Harrah, Steven D.; Parrish, Russell V.

2008-01-01

NASA s Synthetic Vision Systems (SVS) Project conducted research aimed at eliminating visibility-induced errors and low visibility conditions as causal factors in civil aircraft accidents while enabling the operational benefits of clear day flight operations regardless of actual outside visibility. SVS takes advantage of many enabling technologies to achieve this capability including, for example, the Global Positioning System (GPS), data links, radar, imaging sensors, geospatial databases, advanced display media and three dimensional video graphics processors. Integration of these technologies to achieve the SVS concept provides pilots with high-integrity information that improves situational awareness with respect to terrain, obstacles, traffic, and flight path. This paper attempts to emphasize the system aspects of SVS - true systems, rather than just terrain on a flight display - and to document from an historical viewpoint many of the best practices that evolved during the SVS Project from the perspective of some of the NASA researchers most heavily involved in its execution. The Integrated SVS Concepts are envisagements of what production-grade Synthetic Vision systems might, or perhaps should, be in order to provide the desired functional capabilities that eliminate low visibility as a causal factor to accidents and enable clear-day operational benefits regardless of visibility conditions.

Parametric estimates for the receiver operating characteristic curve generalization for non-monotone relationships.

PubMed

Martínez-Camblor, Pablo; Pardo-Fernández, Juan C

2017-01-01

Diagnostic procedures are based on establishing certain conditions and then checking if those conditions are satisfied by a given individual. When the diagnostic procedure is based on a continuous marker, this is equivalent to fix a region or classification subset and then check if the observed value of the marker belongs to that region. Receiver operating characteristic curve is a valuable and popular tool to study and compare the diagnostic ability of a given marker. Besides, the area under the receiver operating characteristic curve is frequently used as an index of the global discrimination ability. This paper revises and widens the scope of the receiver operating characteristic curve definition by setting the classification subsets in which the final decision is based in the spotlight of the analysis. We revise the definition of the receiver operating characteristic curve in terms of particular classes of classification subsets and then focus on a receiver operating characteristic curve generalization for situations in which both low and high values of the marker are associated with more probability of having the studied characteristic. Parametric and non-parametric estimators of the receiver operating characteristic curve generalization are investigated. Monte Carlo studies and real data examples illustrate their practical performance.

Amine–Oxide Hybrid Materials for CO 2 Capture from Ambient Air

DOE PAGES

Didas, Stephanie A.; Choi, Sunho; Chaikittisilp, Watcharop; ...

2015-09-10

Oxide supports functionalized with amine moieties have been used for decades as catalysts and chromatographic media. Owing to the recognized impact of atmospheric CO 2 on global climate change, the study of the use of amine-oxide hybrid materials as CO 2 sorbents has exploded in the past decade. While the majority of the work has concerned separation of CO 2 from dilute mixtures such as flue gas from coal-fired power plants, it has been recognized by us and others that such supported amine materials are also perhaps uniquely suited to extract CO 2 from ultradilute gas mixtures, such as ambientmore » air. As unique, low temperature chemisorbents, they can operate under ambient conditions, spontaneously extracting CO 2 from ambient air, while being regenerated under mild conditions using heat or the combination of heat and vacuum. This Account describes the evolution of our activities on the design of amine-functionalized silica materials for catalysis to the design, characterization, and utilization of these materials in CO 2 separations. New materials developed in our laboratory, such as hyperbranched aminosilica materials, and previously known amine-oxide hybrid compositions, have been extensively studied for CO 2 extraction from simulated ambient air (400 ppm of CO 2). The role of amine type and structure (molecular, polymeric), support type and structure, the stability of the various compositions under simulated operating conditions, and the nature of the adsorbed CO 2 have been investigated in detail. The requirements for an effective, practical air capture process have been outlined and the ability of amine-oxide hybrid materials to meet these needs has been discussed. Ultimately, the practicality of such a “direct air capture” process is predicated not only on the physicochemical properties of the sorbent, but also how the sorbent operates in a practical process that offers a scalable gas-solid contacting strategy. In conclusion, the utility of low pressure drop monolith contactors is suggested to offer a practical mode of amine sorbent/air contacting for direct air capture.« less

Amine–Oxide Hybrid Materials for CO 2 Capture from Ambient Air

DOE PAGES

Didas, Stephanie A.; Choi, Sunho; Chaikittisilp, Watcharop; ...

2015-09-10

CONSPECTUS: Oxide supports functionalized with amine moieties have been used for decades as catalysts and chromatographic media. Owing to the recognized impact of atmospheric CO2 on global climate change, the study of the use of amine-oxide hybrid materials as CO2 sorbents has exploded in the past decade. While the majority of the work has concerned separation of CO2 from dilute mixtures such as flue gas from coal-fired power plants, it has been recognized by us and others that such supported amine materials are also perhaps uniquely suited to extract CO2 from ultradilute gas mixtures, such as ambient air. As unique,more » low temperature chemisorbents, they can operate under ambient conditions, spontaneously extracting CO2 from ambient air, while being regenerated under mild conditions using heat or the combination of heat and vacuum. This Account describes the evolution of our activities on the design of amine-functionalized silica materials for catalysis to the design, characterization, and utilization of these materials in CO2 separations. New materials developed in our laboratory, such as hyperbranched aminosilica materials, and previously known amine-oxide hybrid compositions, have been extensively studied for CO2 extraction from simulated ambient air (400 ppm of CO2). The role of amine type and structure (molecular, polymeric), support type and structure, the stability of the various compositions under simulated operating conditions, and the nature of the adsorbed CO2 have been investigated in detail. The requirements for an effective, practical air capture process have been outlined and the ability of amine−oxide hybrid materials to meet these needs has been discussed. Ultimately, the practicality of such a “direct air capture” process is predicated not only on the physicochemical properties of the sorbent, but also how the sorbent operates in a practical process that offers a scalable gas−solid contacting strategy. In this regard, the utility of low pressure drop monolith contactors is suggested to offer a practical mode of amine sorbent/air contacting for direct air capture.« less

Wind study for high altitude platform design

NASA Technical Reports Server (NTRS)

Strganac, T. W.

1979-01-01

An analysis of upper air winds was performed to define the wind environment at potential operating altitudes for high-altitude powered platform concepts. Expected wind conditions of the contiguous United States, Pacific area (Alaska to Sea of Japan), and European area (Norwegian and Mediterranean Seas) were obtained using a representative network of sites selected based upon adequate high-altitude sampling, geographic dispersion, and observed upper wind patterns. A data base of twenty plus years of rawinsonde gathered wind information was used in the analysis. Annual variations from surface to 10 mb (approximately 31 km) pressure altitude were investigated to encompass the practical operating range for the platform concepts. Parametric analysis for the United States and foreign areas was performed to provide a basis for vehicle system design tradeoffs. This analysis of wind magnitudes indicates the feasibility of annual operation at a majority of sites and more selective seasonal operation for the extreme conditions between the pressure altitudes of 100 to 25 mb based upon the assumed design speeds.

Wind study for high altitude platform design

NASA Technical Reports Server (NTRS)

Strganac, T. W.

1979-01-01

An analysis of upper air winds was performed to define the wind environment at potential operating altitudes for high altitude powered platform concepts. Wind conditions of the continental United States, Pacific area (Alaska to Sea of Japan), and European area (Norwegian and Mediterranean Sea) were obtained using a representative network of sites selected based upon adequate high altitude sampling, geographic dispersion, and observed upper wind patterns. A data base of twenty plus years of rawinsonde gathered wind information was used in the analysis. Annual variations from surface to 10 mb pressure altitude were investigated to encompass the practical operating range for the platform concepts. Parametric analysis for the United States and foreign areas was performed to provide a basis for vehicle system design tradeoffs. This analysis of wind magnitudes indicates the feasibility of annual operation at a majority of sites and more selective seasonal operation for the extreme conditions between the pressure altitudes of 100 to 25 mb based upon the assumed design speeds.

[The effect of multiple administrations of GABA and bicuculline into the rat neostriatum on the realization of a food-acquisition habit].

PubMed

Iakimovskiĭ, A F

1996-01-01

The effects of three-week daily intrastriatal GABA (45 mcg) and bicucullin (5 mcg) microinjections on operant performance in the Skinner's box were studied in rats. GABA was shown to facilitate the operant responses (the rate of lever pressings increased, spontaneous motor activity became optimized). Bicucullin produced the opposite effects, i.e., the operant skill practically disappeared at the second-third week of injections. The operant behaviour was substantially influences by such factors as neurosurgery trauma, narcosis, and injections as demonstrated in control experiments. The findings suggest the involvement of GABAergic neostriatal system in realization of conditioned motor alimentary behaviour.

A non-interventional comparative study of the 20:1 combination of cafedrine/theodrenaline versus ephedrine for the treatment of intra-operative arterial hypotension: the 'HYPOTENS' study design and rationale.

PubMed

Eberhart, Leopold; Geldner, Götz; Huljic, Susanne; Marggraf, Kerstin; Keller, Thomas; Koch, Tilo; Kranke, Peter

2018-06-01

To compare the effectiveness of 20:1 cafedrine/theodrenaline approved for use in Germany to ephedrine in the restoration of arterial blood pressure and on post-operative outcomes in patients with intra-operative arterial hypotension of any origin under standard clinical practice conditions. 'HYPOTENS' is a national, multi-center, prospective, open-label, two-armed, non-interventional study. Effectiveness and post-operative outcome following cafedrine/theodrenaline or ephedrine therapy will be evaluated in two cohorts of hypotensive patients. Cohort A includes patients aged ≥50 years with ASA-classification 2-4 undergoing non-emergency surgical procedures under general anesthesia. Cohort B comprises patients undergoing Cesarean section under spinal anesthesia. Participating surgical departments will be assigned to a treatment arm by routinely used anti-hypotensive agent. To minimize bias, matched department pairs will be compared in a stratified selection process. The composite primary end-point is the lower absolute deviation from individually determined target blood pressure (IDTBP) and the incidence of heart rate ≥100 beats/min in the first 15 min. Secondary end-points include incidence and degree of early post-operative delirium (cohort A), severity of fetal acidosis in the newborn (cohort B), upper absolute deviation from IDTBP, percentage increase in systolic blood pressure, and time to IDTBP. This open-label, non-interventional study design mirrors daily practice in the treatment of patients with intra-operative hypotension and ensures full treatment decision autonomy with respect to each patient's individual condition. Selection of participating sites by a randomization process addresses bias without interfering with the non-interventional nature of the study. First results are expected in 2018. ClinicalTrials.gov identifier: NCT02893241; DRKS identifier: DRKS00010740.

Three-dimensional numerical investigation of the separation process in a vortex tube at different operating conditions

NASA Astrophysics Data System (ADS)

Rafiee, Seyed Ehsan; Sadeghiazad, M. M.

2016-06-01

Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process inside a Ranque-Hilsch vortex tube cleaning (cooling) system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k-ɛ turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows inside the air separators. Results present a comprehensive and practical solution for use in future numerical studies.

The short-term effects of merger on hospital operations.

PubMed Central

Alexander, J A; Halpern, M T; Lee, S Y

1996-01-01

OBJECTIVE: The short-term effects of merger on three areas of hospital operations - scale of activity, personnel/staffing practices, and operating efficiency - is examined. DATA SOURCES: Secondary data obtained from the AHA Annual Surveys (1980-1990) were applied to analyze 92 hospital mergers over the period 1982-1989. STUDY DESIGN: The study employed a multiple time-series design involving a six-year longitudinal assessment of change in hospital operating characteristics before and after merger, and a parallel analysis of change in a randomly selected group of nonmerging hospitals. DATA COLLECTION: Pooled, cross-sectional data files were constructed. Comparisons were evaluated using paired and two-sample t-tests. PRINCIPAL FINDINGS: General merger effects occurred primarily in areas related to operating efficiency. Merger resulted in slowing rates of preexisting trends, rather than dramatic improvements in operating practices. CONCLUSIONS: The short-term impact of merger was generally modest but differed by the conditions under which the merger occurred. Specifically, mergers occurring later in the study period and mergers between similarly sized hospitals displayed greater change in operating characteristics than those occurring earlier in the study period and those between hospitals of dissimilar size. Such differences are attributed respectively to increased competitive pressures after PPS and to greater opportunities for consolidation and efficiencies in mergers involving similarly sized hospitals. PMID:8591932

Jar Test. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Arasmith, E. E.

The jar test is used to determine the proper chemical dosage required for good coagulation and flocculation of water. The test is commonly used in potable water, secondary effluent prior to advanced wastewater treatment, secondary clarifier influent, and sludge conditioning practice. Designed for individuals who have completed National Pollutant…

Solar Integration National Dataset Toolkit | Grid Modernization | NREL

Science.gov Websites

system with them. As system topology, operation practices, and electrics power markets evolve, system data sets (for solar, wind, and load, among others) that accurately represent system conditions. For injection into the power system at each location. Related Publications NREL Develops Sub-Hour Solar Power

41 CFR 102-74.185 - What heating and cooling policy must Federal agencies follow in Federal facilities?

Code of Federal Regulations, 2011 CFR

2011-01-01

... overall energy efficient and economical manner; (b) Maintain temperatures to maximize customer satisfaction by conforming to local commercial equivalent temperature levels and operating practices; (c) Set...-conditioning during non-working hours, except as necessary to return space temperatures to a suitable level for...

Safety Features of Material and Personnel Movement Devices. Module SH-25. Safety and Health.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety features of material and personnel movement devices is one of 50 modules concerned with job safety and health. This module covers safe conditions and operating practices for conveyors, elevators, escalators, moving walks, manlifts, forklifts, and motorized hand trucks. Following the introduction, 10 objectives (each…

33 CFR 209.325 - Navigation lights, aids to navigation, navigation charts, and related data policy, practices and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE...), will report the channel conditions promptly, using standard tabular forms, to: Director, Defense... operations in important channels in tidal waters—either in progress and not already reported, or soon to be...

Community-based telemonitoring for hypertension management: practical challenges and potential solutions.

PubMed

Hovey, Lauren; Kaylor, Mary Beth; Alwan, Majd; Resnick, Helaine E

2011-10-01

Older adults residing in rural areas often lack convenient, patient-centered, community-based approaches to facilitate receipt of routine care to manage common chronic conditions. Without adequate access to appropriate disease management resources, the risk of seniors' experiencing acute events related to these common conditions increases substantially. Further, poorly managed chronic conditions are costly and place seniors at increased risk of institutionalization and permanent loss of independence. Novel, telehealth-based approaches to management of common chronic conditions like hypertension may not only improve the health of older adults, but may also lead to substantial cost savings associated with acute care episodes and institutionalization. The aim of this report is to summarize practical considerations related to operations and logistics of a unique community-based telemonitoring pilot study targeting rural seniors who utilize community-based senior centers. This article reviews the technological challenges encountered during the study and proposes solutions relevant to future research and implementation of telehealth in community-based, congregate settings.

Flow-induced vibration and fretting-wear damage in a moisture separator reheater

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pettigrew, M.J.; Taylor, C.E.; Fisher, N.J.

1996-12-01

Tube failures due to excessive flow-induced vibration were experienced in the tube bundles of moisture separator reheaters in a BWR nuclear station. This paper presents the results of a root cause analysis and covers recommendations for continued operation and for replacement tube bundles. The following tasks are discussed: tube failure analysis; flow velocity distribution calculations; flow-induced vibration analysis with particular emphasis on finned-tubes; fretting-wear testing of a tube and tube-support material combination under simulated operating conditions; field measurements of flow-induced vibration; and development of vibration specifications for replacement tube bundles. The effect of transient operating conditions and of other operationalmore » changes such as tube fouling were considered in the analysis. This paper outlines a typical field problem and illustrates the application of flow-induced vibration technology for the solution of a practical problem.« less

An Overview of Dynamic Contact Resistance Measurement of HV Circuit Breakers

NASA Astrophysics Data System (ADS)

Bhole, A. A.; Gandhare, W. Z.

2016-06-01

With the deregulation of the electrical power industry, utilities and service companies are operating in a changing business environment. High voltage circuit breakers are extremely important for the function of modern electric power supply systems. The need to predict the proper function of circuit breaker grew over the years as the transmission networks expanded. The maintenance of circuit breakers deserves special consideration because of their importance for routine switching and for protection of other equipments. Electric transmission system breakups and equipment destruction can occur if a circuit breaker fails to operate because of a lack of preventive maintenance. Dynamic Contact Resistance Measurement (DCRM) is known as an effective technique for assessing the condition of power circuit breakers contacts and operating mechanism. This paper gives a general review about DCRM. It discusses the practical case studies on use of DCRM for condition assessment of high voltage circuit breakers.

Machining and grinding: High rate deformation in practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Follansbee, P.S.

1993-04-01

Machining and grinding are well-established material-working operations involving highly non-uniform deformation and failure processes. A typical machining operation is characterized by uncertain boundary conditions (e.g.,surface interactions), three-dimensional stress states, large strains, high strain rates, non-uniform temperatures, highly localized deformations, and failure by both nominally ductile and brittle mechanisms. While machining and grinding are thought to be dominated by empiricism, even a cursory inspection leads one to the conclusion that this results more from necessity arising out of the complicated and highly interdisciplinary nature of the processes than from the lack thereof. With these conditions in mind, the purpose of thismore » paper is to outline the current understanding of strain rate effects in metals.« less

Machining and grinding: High rate deformation in practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Follansbee, P.S.

1993-01-01

Machining and grinding are well-established material-working operations involving highly non-uniform deformation and failure processes. A typical machining operation is characterized by uncertain boundary conditions (e.g.,surface interactions), three-dimensional stress states, large strains, high strain rates, non-uniform temperatures, highly localized deformations, and failure by both nominally ductile and brittle mechanisms. While machining and grinding are thought to be dominated by empiricism, even a cursory inspection leads one to the conclusion that this results more from necessity arising out of the complicated and highly interdisciplinary nature of the processes than from the lack thereof. With these conditions in mind, the purpose of thismore » paper is to outline the current understanding of strain rate effects in metals.« less

Normative legal regulating of vehicles with a high degree of automation of control: strategy and tactics for implementation in Russia

NASA Astrophysics Data System (ADS)

Kisulenko, B. V.; Bocharov, A. V.; Pugachev, V. V.

2018-02-01

The article discusses the risks specific to vehicles with a high level of automation of control, and conditions the limits on the operating conditions of such vehicles. The article determines existing legal barriers to the implementation of autonomous vehicles. The article contains an analysis of foreign practice of regulating in the European Union, Japan and the United States and information about the UNECE activities aimed at enabling operation of vehicles with a high degree of automation control. Basing on the results of the analysis, the authors made proposals for removal of legal barriers. The article also contains proposals for the development of specific requirements for autonomous vehicles associated with their specific features of design.

In-mine testing of a natural background sensor, part B

NASA Technical Reports Server (NTRS)

Martzloff, F. D.

1981-01-01

The capability of a natural background sensor for measuring the thickness of top coal on a longwall face was examined. The limitations on the time during which tests could be performed, and the roof conditions, did not produce readings of top coal measurements during the shearer operation. It was demonstrated that the system is capable to survive operating conditions in the mine environment, while the static tests confirmed that the natural background sensor approach is a valid method of measuring top coal thickness in mines where the roof rock provides a constant radiation level. It is concluded that the practical results will improve sequent development of an integrated vertical control system which is information from the natural background system.

Block LU factorization

NASA Technical Reports Server (NTRS)

Demmel, James W.; Higham, Nicholas J.; Schreiber, Robert S.

1992-01-01

Many of the currently popular 'block algorithms' are scalar algorithms in which the operations have been grouped and reordered into matrix operations. One genuine block algorithm in practical use is block LU factorization, and this has recently been shown by Demmel and Higham to be unstable in general. It is shown here that block LU factorization is stable if A is block diagonally dominant by columns. Moreover, for a general matrix the level of instability in block LU factorization can be founded in terms of the condition number kappa(A) and the growth factor for Gaussian elimination without pivoting. A consequence is that block LU factorization is stable for a matrix A that is symmetric positive definite or point diagonally dominant by rows or columns as long as A is well-conditioned.

On feasibility of a closed nuclear power fuel cycle with minimum radioactivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrianova, E. A.; Davidenko, V. D.; Tsibulskiy, V. F., E-mail: Tsibulskiy-VF@nrcki.ru

2015-12-15

Practical implementation of a closed nuclear fuel cycle implies solution of two main tasks. The first task is creation of environmentally acceptable operating conditions of the nuclear fuel cycle considering, first of all, high radioactivity of the involved materials. The second task is creation of effective and economically appropriate conditions of involving fertile isotopes in the fuel cycle. Creation of technologies for management of the high-level radioactivity of spent fuel reliable in terms of radiological protection seems to be the hardest problem.

Cairo consensus on the IVF laboratory environment and air quality: report of an expert meeting.

PubMed

Mortimer, D; Cohen, J; Mortimer, S T; Fawzy, M; McCulloh, D H; Morbeck, D E; Pollet-Villard, X; Mansour, R T; Brison, D R; Doshi, A; Harper, J C; Swain, J E; Gilligan, A V

2018-03-02

This proceedings report presents the outcomes from an international Expert Meeting to establish a consensus on the recommended technical and operational requirements for air quality within modern assisted reproduction technology (ART) laboratories. Topics considered included design and construction of the facility, as well as its heating, ventilation and air conditioning system; control of particulates, micro-organisms (bacteria, fungi and viruses) and volatile organic compounds (VOCs) within critical areas; safe cleaning practices; operational practices to optimize air quality while minimizing physicochemical risks to gametes and embryos (temperature control versus air flow); and appropriate infection-control practices that minimize exposure to VOC. More than 50 consensus points were established under the general headings of assessing site suitability, basic design criteria for new construction, and laboratory commissioning and ongoing VOC management. These consensus points should be considered as aspirational benchmarks for existing ART laboratories, and as guidelines for the construction of new ART laboratories. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Shear Ram Verification Test Protocol (VTP) Best Practices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lindley, Roy A.; Braun, Joseph C.

A blowout preventer (BOP) is a critical component used on subsea oil and gas wells during drilling, completion, and workover operations on the U. S. outer continental shelf (OCS). The purpose of the BOP is to seal oil and gas wells, and in the case of an emergency well-control event, to prevent the uncontrolled release of hydrocarbons. One of the most important components of the BOP is the hydraulically operated blind shear ram (BSR) that shears drilling-related components, such as drill pipes, casings, tubings, and wire-related tools that may have been placed in the well. In addition to shearing thesemore » components, the BSR must form a seal to keep hydrocarbons within the well bore, even when under the highest well-fluid pressures expected. The purpose of this document is for Argonne National Laboratory (ANL) to provide an independent view, based on current regulations, and best practices for testing and confirming the operability and suitability of BSRs under realistic (or actual) well conditions.« less

Managing your practice's first impression: the process of front-desk reengineering.

PubMed

Walsh, Alison L

2004-01-01

Patients must be regarded as consumers. As such, they are increasingly informed, questioning, cost-conscious, technologically savvy, and demanding. Just as health plans have developed defined contribution products that offer consumers more control over how and where their health-care dollars are spent, practice success is linked to reengineering office operations to offer consumers and patients greater choice, control, autonomy, and service. Patients and consumers want practices that deliver clinical and business services that meet the criteria of reliability, effciency, service offerings, patient focus, enthusiasm, customization, and trust. Physician practices must also take care to avoid destructive and disruptive behaviors and conditions such as noise, interference, excessive repetition, long waits, appointment delays, and staff rudeness. A successful patient-focused practice emerges when physicians and office staff begin to look at the clinical and service experience through the patient's eyes.

Alternative divertor target concepts for next step fusion devices

NASA Astrophysics Data System (ADS)

Mazul, I. V.

2016-12-01

The operational conditions of a divertor target in the next steps of fusion devices are more severe in comparison with ITER. The current divertor designs and technologies have a limited application concerning these conditions, and so new design concepts/technologies are required. The main reasons which practically prevent the use of the traditional motionless solid divertor target are analyzed. We describe several alternative divertor target concepts in this paper. The comparative analysis of these concepts (including the advantages and the drawbacks) is made and the prospects for their practical implementation are prioritized. The concept of the swept divertor target with a liquid metal interlayer between the moving armour and motionless heat-sink is presented in more detail. The critical issues of this design are listed and outlined, and the possible experiments are presented.

Types and status of high reliability practices in the federal fire community (Abstract)

Treesearch

Anne Black; Brooke McBride

2012-01-01

Since emerging in the late 1980s, the paradigm of High Reliability Organizing (HRO) has sought to describe how and why certain organizations consistently function safely under hazardous conditions. Researchers have explored a variety of industrial situations, from the early observations of nuclear aircraft carrier operations to nursing units and even high-tech IPOs....

Educational Virtual Environments as a Lens for Understanding both Precise Repeatability and Specific Variation in Learning Ecologies

ERIC Educational Resources Information Center

Zuiker, Steven J.

2012-01-01

As a global cyberinfrastructure, the Internet makes authentic digital problem spaces like educational virtual environments (EVEs) available to a wide range of classrooms, schools and education systems operating under different circumstantial, practical, social and cultural conditions. And yet, if the makers and users of EVEs both have a hand in…

The Invisible Veil: Changing Paradigms in the Art Therapy Profession

ERIC Educational Resources Information Center

Talwar, Savneet; Iyer, Jayashree; Doby-Copeland, Cheryl

2004-01-01

According to Sue and Sue (1999), the invisible veil is a worldview which affects all individuals as products of cultural conditioning and which operates outside the level of conscious awareness. Further, they state that the "values, assumptions, beliefs, and practices of our society are structured in a manner as to serve only one narrow segment of…

12 CFR Appendix C to Part 30 - OCC Guidelines Establishing Standards for Residential Mortgage Lending Practices

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF THE TREASURY SAFETY AND SOUNDNESS STANDARDS Pt. 30, App. C Appendix C to Part 30—OCC Guidelines..., Conditions, and Features in Certain Mortgages D. Avoidance of Consumer Misunderstanding E. Purchased and... national banks and their operating subsidiaries, either directly or through loans that they purchase or...

Ground-based forest harvesting effects on soil physical properties and Douglas-fir growth.

Treesearch

Adrian Ares; Thomas A. Terry; Richard E. Miller; Harry W. Anderson; Barry L. Flaming

2005-01-01

Soil properties and forest productivity can be affected by heavy equipment used for harvest and site preparation but these impacts vary greatly with site conditions and operational practices. We assessed the effects of ground-based logging on soil physical properties and subsequent Douglas-fir [Pseudotsuga menziesii (Mirb) Franco] growth on a highly...

Tinkering with Material Resources: Operating under Ambiguous Conditions in Rock Construction Work

ERIC Educational Resources Information Center

Styhre, Alexander

2009-01-01

Purpose: Ethnographic studies of, for instance, laboratory work show that practices never reach a full closure but are always open to contingencies and ambiguities, making it possible to accommodate new empirical findings. The aim of the paper is to demonstrate that this is true also for less "high-brow" work in, for example, the…

Minimizing Pathogen Transference during Lettuce Harvesting by Optimizing the Design of the Harvesting Device and Operation Practices Principle Investigator

USDA-ARS?s Scientific Manuscript database

Laboratory studies have shown that Escherichia coli O157:H7 can be transferred to lettuce by a harvesting-coring knife. However, specific scientific data that reflect realistic contamination conditions needed for risk assessments are not available. Also needed are methods to prevent/reduce pathoge...

41 CFR 102-74.185 - What heating and cooling policy must Federal agencies follow in Federal facilities?

Code of Federal Regulations, 2014 CFR

2014-01-01

... satisfaction by conforming to local commercial equivalent temperature levels and operating practices; (c) Set heating temperatures no higher than 55 degrees Fahrenheit during non-working hours; (d) Not provide air-conditioning during non-working hours, except as necessary to return space temperatures to a suitable level for...

41 CFR 102-74.185 - What heating and cooling policy must Federal agencies follow in Federal facilities?

Code of Federal Regulations, 2012 CFR

2012-01-01

... satisfaction by conforming to local commercial equivalent temperature levels and operating practices; (c) Set heating temperatures no higher than 55 degrees Fahrenheit during non-working hours; (d) Not provide air-conditioning during non-working hours, except as necessary to return space temperatures to a suitable level for...

41 CFR 102-74.185 - What heating and cooling policy must Federal agencies follow in Federal facilities?

Code of Federal Regulations, 2013 CFR

2013-07-01

... satisfaction by conforming to local commercial equivalent temperature levels and operating practices; (c) Set heating temperatures no higher than 55 degrees Fahrenheit during non-working hours; (d) Not provide air-conditioning during non-working hours, except as necessary to return space temperatures to a suitable level for...

Patient Populations, Clinical Associations, and System Efficiency in Healthcare Delivery System

NASA Astrophysics Data System (ADS)

Liu, Yazhuo

The efforts to improve health care delivery usually involve studies and analysis of patient populations and healthcare systems. In this dissertation, I present the research conducted in the following areas: identifying patient groups, improving treatments for specific conditions by using statistical as well as data mining techniques, and developing new operation research models to increase system efficiency from the health institutes' perspective. The results provide better understanding of high risk patient groups, more accuracy in detecting disease' correlations and practical scheduling tools that consider uncertain operation durations and real-life constraints.

Maintenance manager's manual for small transit agencies. Special report 1985-1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, W.

1988-03-01

This publication contains information to assist operators of transit agencies providing public transportation in rural and smaller urban areas to better manage their vehicle maintenance programs. The report includes discussions of maintenance management, maintenance programs preventive maintenance, recordkeeping, selection of type of maintenance operation, in-house maintenance, and maintenance practices. Also included are appendixes giving supplementary information about tire loads; lubrication oil; mechanic hand tools; shop tools; mechanic aptitude tests; technical training resources; maintenance management training resources; and lists of manufacturers of air-conditioning systems, wheelchair lifts and wheelchair ramps.

Flight evaluation of LORAN-C in the State of Vermont

NASA Technical Reports Server (NTRS)

Mackenzie, F. D.; Lytle, C. D.

1981-01-01

A flight evaluation of LORAN C as a supplement to existing navigation aids for general aviation aircraft, particularly in mountainous regions of the United States and where VOR coverage is limited was conducted. Flights, initiated in the summer months, extend through four seasons and practically all weather conditions typical of northeastern U.S. operations. Assessment of all the data available indicates that LORAN C signals are suitable as a means of navigation during enroute, terminal and nonprecision approach operations and the performance exceeds the minimum accuracy criteria.

Spacecraft Charging: Hazard Causes, Hazard Effects, Hazard Controls

NASA Technical Reports Server (NTRS)

Koontz, Steve.

2018-01-01

Spacecraft flight environments are characterized both by a wide range of space plasma conditions and by ionizing radiation (IR), solar ultraviolet and X-rays, magnetic fields, micrometeoroids, orbital debris, and other environmental factors, all of which can affect spacecraft performance. Dr. Steven Koontz's lecture will provide a solid foundation in the basic engineering physics of spacecraft charging and charging effects that can be applied to solving practical spacecraft and spacesuit engineering design, verification, and operations problems, with an emphasis on spacecraft operations in low-Earth orbit, Earth's magnetosphere, and cis-Lunar space.

Mechanisms of Practice-Related Reductions of Dual-Task Interference with Simple Tasks: Data and Theory

PubMed Central

Strobach, Tilo; Torsten, Schubert

2017-01-01

In dual-task situations, interference between two simultaneous tasks impairs performance. With practice, however, this impairment can be reduced. To identify mechanisms leading to a practice-related improvement in sensorimotor dual tasks, the present review applied the following general hypothesis: Sources that impair dual-task performance at the beginning of practice are associated with mechanisms for the reduction of dual-task impairment at the end of practice. The following types of processes provide sources for the occurrence of this impairment: (a) capacity-limited processes within the component tasks, such as response-selection or motor response stages, and (b) cognitive control processes independent of these tasks and thus operating outside of component-task performance. Dual-task practice studies show that, under very specific conditions, capacity-limited processes within the component tasks are automatized with practice, reducing the interference between two simultaneous tasks. Further, there is evidence that response-selection stages are shortened with practice. Thus, capacity limitations at these stages are sources for dual-task costs at the beginning of practice and are overcome with practice. However, there is no evidence demonstrating the existence of practice-related mechanisms associated with capacity-limited motor-response stages. Further, during practice, there is an acquisition of executive control skills for an improved allocation of limited attention resources to two tasks as well as some evidence supporting the assumption of improved task coordination. These latter mechanisms are associated with sources of dual-task interference operating outside of component task performance at the beginning of practice and also contribute to the reduction of dual-task interference at its end. PMID:28439319

Just-in-time classifiers for recurrent concepts.

PubMed

Alippi, Cesare; Boracchi, Giacomo; Roveri, Manuel

2013-04-01

Just-in-time (JIT) classifiers operate in evolving environments by classifying instances and reacting to concept drift. In stationary conditions, a JIT classifier improves its accuracy over time by exploiting additional supervised information coming from the field. In nonstationary conditions, however, the classifier reacts as soon as concept drift is detected; the current classification setup is discarded and a suitable one activated to keep the accuracy high. We present a novel generation of JIT classifiers able to deal with recurrent concept drift by means of a practical formalization of the concept representation and the definition of a set of operators working on such representations. The concept-drift detection activity, which is crucial in promptly reacting to changes exactly when needed, is advanced by considering change-detection tests monitoring both inputs and classes distributions.

Determination of Particular Endogenous Fires Hazard Zones in Goaf with Caving of Longwall

NASA Astrophysics Data System (ADS)

Tutak, Magdalena; Brodny, Jaroslaw

2017-12-01

Hazard of endogenous fires is one of the basic and common presented occupational safety hazards in coal mine in Poland and in the world. This hazard means possibility of coal self-ignition as the result of its self-heating process in mining heading or its surrounding. In underground coal-mining during ventilating of operating longwalls takes place migration of parts of airflow to goaf with caving. In a case when in these goaf a coal susceptible to selfignition occurs, then the airflow through these goaf may influence on formation of favourable conditions for coal oxidation and subsequently to its self-heating and self-ignition. Endogenous fire formed in such conditions can pose a serious hazard for the crew and for continuity of operation of mining plant. From the practical point of view, a very significant meaning has determination of the zone in the goaf with caving, in which necessary conditions for occurrence of endogenous fire are fulfilled. In the real conditions determination of such a zone is practically impossible. Therefore, authors of paper developed a methodology of determination of this zone basing on the results of modelling tests. This methodology includes a development of model of tested area, determination of boundary conditions and carrying out the simulation calculations. Based on the obtained results particular hazardous zone of endogenous fire is determined. A base for development of model of investigated region and selection of boundary conditions are the results of real tests. In the paper fundamental assumption of developed methodology, particularly in a range of assumed hazard criterion and sealing coefficient of goaf with caving were discussed. Also a mathematical model of gas flow through the porous media was characterized. Example of determination of a zone particularly endangered by endogenous fire for real system of mining heading in one of the hard coal mine was presented. Longwall ventilated in the „Y” system was subjected to the tests. For determined mining-geological conditions, the critical value of velocity of airflow and oxygen concentration in goaf, conditioning initiation of coal oxidation process were determined. For calculations ANSYS Fluent software based on finite volume method, which enable very precisely to determine the physical and chemical air and parameters at any point of tested mining heading and goaf with caving was used. Such precisely determination of these parameters on the base of the test in real conditions is practically impossible. Obtained results allowed to take early proper actions in order to limit the occurrence of endogenous fire. One can conclude, that presented methodology creates great possibilities of practical application of modelling tests for improvement of the occupational safety state in mine.

[Functional status of musculo-venous pump of shin in various types of of operations for varicose disease].

PubMed

Boítsov, N I; Evtikhov, R M; Potapov, N A

1997-01-01

Functional conditions of the muscular-venous pump of the shin were studied in 280 patients with varicose veins before surgery, in 164 patients in remote terms after various operations and in 54 healthy subjects on the base of guantitative plethysmographic estimation of hemodynamic parameters. At the stage of compensation all volume indices of the bloodflow were close to normal values; in the stage of decompensation the substantial increase of volume effectiveness and volume flow velocity was observed at carrying out the test for direct deep blood flow when walking. It was determined that in natural condition for venous hemodynamics the adaptation mechanisms of musculo-venous pump were not realized. The operation of Linton upsets the function of musculo-venous pump of the shin. The Kocket operation does not eliminate the pathologic overload when working due to insufficient radicalism in liquidation of perforation escape (steal phenomena). The subfascial ligation of perforating veins of the shin through the minor approach, used in clinical practice, proved to be sufficiently radical and does not impair the function of the musculo-venous pump of the shin.

Fuel-conservation evaluation of US Army helicopters. Part 6. Performance calculator evaluation. Final report for period ending January 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dominick, F.; Lockwood, R.A.

1986-07-01

The US Army Aviation Engineering Flight Activity conducted an evaluation of Flight Management Calculator for the UH-1H. The calculator was a Hewlett-Packard HP-41CV. The performance calculator was evaluated for flight planning and in-flight use during 14 mission flights simulating operational conditions. The calculator was much easier to use in-flight than the operator's manual data. The calculator program needs improvement in the areas of pre-flight planning and execution speed. The mission flights demonstrated a 19% fuel saving using optimum over normal flight profiles in warm temperatures (15/sup 0/C above standard). Savings would be greater at colder temperatures because of increasing compressibilitymore » effects. Acceptable accuracy for individual aircraft under operational conditions may require a regressive analog model in which individual aircraft data are used to update the program. The performance data base for the UH-1H was expanded with level flight and hover data to thrust coefficients and Mach numbers to the practical limits of aircraft operation.« less

NASA/FAA/NCAR Supercooled Large Droplet Icing Flight Research: Summary of Winter 1996-1997 Flight Operations

NASA Technical Reports Server (NTRS)

Miller, Dean; Ratvasky, Thomas; Bernstein, Ben; McDonough, Frank; Strapp, J. Walter

1998-01-01

During the winter of 1996-1997, a flight research program was conducted at the NASA-Lewis Research Center to study the characteristics of Supercooled Large Droplets (SLD) within the Great Lakes region. This flight program was a joint effort between the National Aeronautics and Space Administration (NASA), the National Center for Atmospheric Research (NCAR), and the Federal Aviation Administration (FAA). Based on weather forecasts and real-time in-flight guidance provided by NCAR, the NASA-Lewis Icing Research Aircraft was flown to locations where conditions were believed to be conducive to the formation of Supercooled Large Droplets aloft. Onboard instrumentation was then used to record meteorological, ice accretion, and aero-performance characteristics encountered during the flight. A total of 29 icing research flights were conducted, during which "conventional" small droplet icing, SLD, and mixed phase conditions were encountered aloft. This paper will describe how flight operations were conducted, provide an operational summary of the flights, present selected experimental results from one typical research flight, and conclude with practical "lessons learned" from this first year of operation.

Length-extension resonator as a force sensor for high-resolution frequency-modulation atomic force microscopy in air.

PubMed

Beyer, Hannes; Wagner, Tino; Stemmer, Andreas

2016-01-01

Frequency-modulation atomic force microscopy has turned into a well-established method to obtain atomic resolution on flat surfaces, but is often limited to ultra-high vacuum conditions and cryogenic temperatures. Measurements under ambient conditions are influenced by variations of the dew point and thin water layers present on practically every surface, complicating stable imaging with high resolution. We demonstrate high-resolution imaging in air using a length-extension resonator operating at small amplitudes. An additional slow feedback compensates for changes in the free resonance frequency, allowing stable imaging over a long period of time with changing environmental conditions.

Generalizing Landauer's principle

NASA Astrophysics Data System (ADS)

Maroney, O. J. E.

2009-03-01

In a recent paper [Stud. Hist. Philos. Mod. Phys. 36, 355 (2005)] it is argued that to properly understand the thermodynamics of Landauer’s principle it is necessary to extend the concept of logical operations to include indeterministic operations. Here we examine the thermodynamics of such operations in more detail, extending the work of Landauer to include indeterministic operations and to include logical states with variable entropies, temperatures, and mean energies. We derive the most general statement of Landauer’s principle and prove its universality, extending considerably the validity of previous proofs. This confirms conjectures made that all logical operations may, in principle, be performed in a thermodynamically reversible fashion, although logically irreversible operations would require special, practically rather difficult, conditions to do so. We demonstrate a physical process that can perform any computation without work requirements or heat exchange with the environment. Many widespread statements of Landauer’s principle are shown to be special cases of our generalized principle.

Molecular Functionalization of Graphene Oxide for Next-Generation Wearable Electronics.

PubMed

Zarrin, Hadis; Sy, Serubbabel; Fu, Jing; Jiang, Gaopeng; Kang, Keunwoo; Jun, Yun-Seok; Yu, Aiping; Fowler, Michael; Chen, Zhongwei

2016-09-28

Acquiring reliable and efficient wearable electronics requires the development of flexible electrolyte membranes (EMs) for energy storage systems with high performance and minimum dependency on the operating conditions. Herein, a freestanding graphene oxide (GO) EM is functionalized with 1-hexyl-3-methylimidazolium chloride (HMIM) molecules via both covalent and noncovalent bonds induced by esterification reactions and electrostatic πcation-π stacking, respectively. Compared to the commercial polymeric membrane, the thin HMIM/GO membrane demonstrates not only slightest performance sensitivity to the operating conditions but also a superior hydroxide conductivity of 0.064 ± 0.0021 S cm(-1) at 30% RH and room temperature, which was 3.8 times higher than that of the commercial membrane at the same conditions. To study the practical application of the HMIM/GO membranes in wearable electronics, a fully solid-state, thin, flexible zinc-air battery and supercapacitor are made exhibiting high battery performance and capacitance at low humidified and room temperature environment, respectively, favored by the bonded HMIM molecules on the surface of GO nanosheets. The results of this study disclose the strong potential of manipulating the chemical structure of GO to work as a lightweight membrane in wearable energy storage devices, possessing highly stable performance at different operating conditions, especially at low relative humidity and room temperature.

Dry kiln operator's manual

Treesearch

William T. Simpson

1991-01-01

The modern dry kiln is a unique product of research, development, and experience. It is the only practical means now in wide use for rapid, high- volume drying of lumber to conditions necessary for maximum serviceability in housing, furniture, millwork, and many other wood products. As part of our charge to help further the efficient utilization of our nation’s timber...

Types and status of high reliability practices in the US federal wildland fire community

Treesearch

Anne E. Black

2012-01-01

Since emerging in the late 1980s, the paradigm of High Reliability Organizing (HRO) has sought to describe how and why certain organizations consistently function safely under hazardous conditions. Researchers have explored a variety of industrial situations, from the early observations of nuclear aircraft carrier operations to nursing units and even high-tech IPOs....

Choosing methods and equipment for logging

Treesearch

Fred C. Simmons

1948-01-01

A logging job is one of the most difficult types of business to manage efficiently. In practically everything the logger does he is compelled to make a choice between several methods of operation and types of equipment. The conditions under which he works are constantly changing, particularly when he is forced to move fairly often from one timber tract to another. But...

Best Practices for Operando Battery Experiments: Influences of X-ray Experiment Design on Observed Electrochemical Reactivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borkiewicz, O. J.; Wiaderek, Kamila M.; Chupas, Peter J.

Dynamic properties and multiscale complexities governing electrochemical energy storage in batteries are most ideally interrogated under simulated operating conditions within an electrochemical cell. We assess how electrochemical reactivity can be impacted by experiment design, including the X-ray measurements or by common features or adaptations of electrochemical cells that enable X-ray measurements.

Analysis of the prescribed burning practice in the pine forest of northwestern Portugal.

PubMed

Fernandes, P; Botelho, H

2004-01-01

The ignition of low-intensity fires in the dormant season in the pine stands of north-western Portugal seeks to reduce the existing fuel hazard without compromising site quality. The purpose of this study is to characterise this practice and assess its effectiveness, based on information resulting from the normal monitoring process at the management level, and using operational guidelines, fire behaviour models and a newly developed method to classify prescribed fire severity. Although the region's humid climate strongly constrains the activity of prescribed fire, 87% of the fires analysed were undertaken under acceptable meteorological and fuel moisture conditions. In fact, most operations achieved satisfactory results. On average, prescribed fire reduces by 96% the potential intensity of a wildfire occurring under extreme weather conditions, but 36% of the treated sites would still require heavy fire fighting resources to suppress such fire, and 17% would still carry it in the tree canopy. Only 10% of the prescribed burns have an excessive impact on trees or the forest floor, while 89% (normal fire weather) or 59% (extreme fire weather) comply with both ecological integrity maintenance and wildfire protection needs. Improved planning and monitoring procedures are recommended in order to overcome the current deficiencies.

Time-Temperature Profiling of United Kingdom Consumers' Domestic Refrigerators.

PubMed

Evans, Ellen W; Redmond, Elizabeth C

2016-12-01

Increased consumer demand for convenience and ready-to-eat food, along with changes to consumer food purchase and storage practices, have resulted in an increased reliance on refrigeration to maximize food safety. Previous research suggests that many domestic refrigerators operate at temperatures exceeding recommendations; however, the results of several studies were determined by means of one temperature data point, which, given temperature fluctuation, may not be a true indicator of actual continual operating temperatures. Data detailing actual operating temperatures and the effects of consumer practices on temperatures are limited. This study has collated the time-temperature profiles of domestic refrigerators in consumer kitchens (n = 43) over 6.5 days with concurrent self-reported refrigerator usage. Overall, the findings established a significant difference (P < 0.05) between one-off temperature (the recording of one temperature data point) and mean operating temperature. No refrigerator operated at ≤5.0°C for the entire duration of the study. Mean temperatures exceeding 5.0°C were recorded in the majority (91%) of refrigerators. No significant associations or differences were determined for temperature profiles and demographics, including household size, or refrigerator characteristics (age, type, loading, and location). A positive correlation (P < 0.05) between room temperature and refrigerator temperature was determined. Reported door opening frequency correlated with temperature fluctuation (P < 0.05). Thermometer usage was determined to be infrequent. Cumulatively, research findings have established that the majority of domestic refrigerators in consumer homes operate at potentially unsafe temperatures and that this is influenced by consumer usage. The findings from this study may be utilized to inform the development of shelf-life testing based on realistic domestic storage conditions. Furthermore, the data can inform the development of future educational interventions to increase safe domestic refrigeration practices.

Applying fenton process in acrylic fiber wastewater treatment and practice teaching

NASA Astrophysics Data System (ADS)

Zhang, Chunhui; Jiang, Shan

2018-02-01

Acrylic fiber manufacturing wastewater, containing a wider range of pollutants, high concentration of refractory organics, poisonous and harmful matters, was significant to treat from the effluents of wastewater treatment plants (WWTPs). In this work, a Fenton reactor was employed for advanced treatment of the WWTP effluents. An orthogonal test and a parametric study were carried out to determine the effect of the main operating conditions and the Fenton process attain excellent performance on the degradation of pollutants under an optimal condition of ferrous dosage was 6.25 mM, hydrogen peroxide was 75 mM and initial pH value was 3.0 in 90 min reaction time. The removal efficiency of COD, TOC, NH4 +-N and TN reached from 45% to 69%. Lastly, as a teaching advice, the Fenton reactor was used in practicing teaching nicely.

Tug fleet and ground operations schedules and controls. Volume 2: part 2, addenda

NASA Technical Reports Server (NTRS)

1975-01-01

The results of a study to assess the tug safing requirements at postlanding are presented. The study considered the normal (green light) conditions from orbiter landing to completion of preparations for the next launch. Normal tug ground turnaround operations include handling and transportation activities and the performance of inspections, tests, and checkout functions. These activities dictate that hazards to ground personnel, the tug, GSE, facilities, and ecology be reduced to the lowest practical level consistent with program objectives, cost, and schedules. During flight operations, the tug contains energy sources that constitute potential hazards but are required for mission accomplishment. These potential hazards have been reduced to an acceptable level for flight operation by design features and by providing for control of energy sources.

Multistage depressed collector with efficiency of 90 to 94 percent for operation of a dual-mode traveling wave tube in the linear region

NASA Technical Reports Server (NTRS)

Ramins, P.; Fox, T. A.

1980-01-01

An axisymmetric, multistage, depressed collector of fixed geometric design was evaluated in conjunction with an octave bandwidth, dual mode traveling wave tube (TWT). The TWT was operated over a wide range of conditions to simulate different applications. The collector performance was optimized (within the constraint of fixed geometric design) over the range of TWT operating conditions covered. For operation of the TWT in the linear, low distortion range, 90 percent and greater collector efficiencies were obtained leading to TWT overall efficiencies of 20 to 35 percent, as compared with 2 to 5 percent with an undepressed collector. With collectors of this efficiency and minimized beam interception losses, it becomes practical to design dual mode TWT's such that the low mode can represent operation well below saturation. Consequently, the required pulse up in beam current can be reduced or eliminated, and this mitigates beam control and dual mode TWT circuit design problems. For operation of the dual mode TWT at saturation, average collector efficiencies in excess of 85 percent were obtained for both the low and high modes across an octave bandwidth, leading to a three to fourfold increase in the TWT overall efficiency.

Automatic efficiency optimization of an axial compressor with adjustable inlet guide vanes

NASA Astrophysics Data System (ADS)

Li, Jichao; Lin, Feng; Nie, Chaoqun; Chen, Jingyi

2012-04-01

The inlet attack angle of rotor blade reasonably can be adjusted with the change of the stagger angle of inlet guide vane (IGV); so the efficiency of each condition will be affected. For the purpose to improve the efficiency, the DSP (Digital Signal Processor) controller is designed to adjust the stagger angle of IGV automatically in order to optimize the efficiency at any operating condition. The A/D signal collection includes inlet static pressure, outlet static pressure, outlet total pressure, rotor speed and torque signal, the efficiency can be calculated in the DSP, and the angle signal for the stepping motor which control the IGV will be sent out from the D/A. Experimental investigations are performed in a three-stage, low-speed axial compressor with variable inlet guide vanes. It is demonstrated that the DSP designed can well adjust the stagger angle of IGV online, the efficiency under different conditions can be optimized. This establishment of DSP online adjustment scheme may provide a practical solution for improving performance of multi-stage axial flow compressor when its operating condition is varied.

Structural fabrication quality as a factor of industrial facilities safety

NASA Astrophysics Data System (ADS)

Tishkov, E. V.; Kardaev, E. M.; Stolbova, S. Yu; Shishova, O. S.

2018-04-01

In the conditions of industrial facilities high wear degree, it is very important to ensure the possibility of their safe operation in order to avoid various kinds of accidents and catastrophes. As practice shows, industrial plant collapses can occur suddenly under normal operating conditions. Usually, such accidents can take place at different stages of structures life cycle. One of the reasons for this is the initially low quality of reinforced concrete structures fabrication. The article considers the factors contributing to the collapse of reinforced concrete structures of water purification tanks located on the territory of the Omsk Region. The main surveys results on tank structures after collapse with the use of ultrasonic and physical methods of investigation are presented. On the basis of the obtained data analysis, it was found that the main cause of the accidents was the insufficient load-bearing capacity of typical reinforced concrete structures, caused by defects in their fabrication in the factory conditions because of exceeding the standard displacement from the design position of the working reinforcement. Recommendations are given on the identification of defective structures and the prevention of similar accidents when operating similar tanks at manufacturing plants constructed from standard designs.

A case study employing operant conditioning to reduce stress of capture for red-bellied tamarins (Saguinus labiatus).

PubMed

Owen, Yvonne; Amory, Jonathan R

2011-01-01

Traditional techniques used to capture New World monkeys, such as net capture, can induce high levels of acute stress detrimental to welfare. Alternatively, training nonhuman animals via operant conditioning to voluntarily participate in husbandry and/or veterinary practices is accepted as a humane process that can reduce stress and improve welfare. This study details the use of operant conditioning using positive reinforcement training (PRT) and target training to train a family of 5 captive red-bellied tamarins (Saguinus labiatus) in a wildlife park to voluntarily enter a transportation box and remain calm for 1 min after 54 training sessions. Observations of 2 unrelated net-capture processes provided measures of locomotion and vocalizations as indicators of stress behavior that were compared with those of the trained tamarins. Net-captured monkeys exhibited rapid erratic locomotion and emitted long, high-frequency vocalizations during capture whereas the trained tamarins exhibited minimal locomotion and emitted only 4 brief vocalizations (root mean square 35 dB) during capture. This indicates that the use of PRT considerably reduced potential for stress and improved welfare during the capture and containment of the tamarins. Copyright © Taylor & Francis Group, LLC

The unit field sanitation team: a square peg in a round hole.

PubMed

Bosetti, Timothy; Bridges, Davin

2009-01-01

Basic field sanitation and hygiene is a lost art in today's modern Army. Today, more than ever, there is a need for the unit field sanitation team (FST) to serve as advisors to unit commanders in the area of basic field sanitation and hygiene. Soldiers should know how to construct field latrines, construct waste disposal devices, conduct pest management and control activities, disinfect field water supplies, and practice personal hygiene under field conditions. The current unit FST concept is centered on company-sized formations operating in open terrain. This concept does not support current operations, transformed formations, rapidly changing doctrine, and the expeditionary nature of the Army. This article does not present a new concept, but rather a new look at an existing concept and practice based upon the lessons-learned and after-action reports from the Global War on Terrorism to support the Army in transformation during an era of persistent conflict.

Petition to request an exemption from 100 percent identity testing of dietary ingredients: Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements. Interim final rule.

PubMed

2007-06-25

The Food and Drug Administration (FDA) is issuing an interim final rule (IFR) that sets forth a procedure for requesting an exemption from the requirement in the final rule "Current Good Manufacturing Practice in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements," published elsewhere in this issue of the Federal Register, that the manufacturer conduct at least one appropriate test or examination to verify the identity of any component that is a dietary ingredient. This IFR allows for submission to, and review by, FDA of an alternative to the required 100 percent identity testing of components that are dietary ingredients, provided certain conditions are met and establishes a requirement for retention of records relating to the FDA's response to an exemption request.

Optimal threshold estimation for binary classifiers using game theory.

PubMed

Sanchez, Ignacio Enrique

2016-01-01

Many bioinformatics algorithms can be understood as binary classifiers. They are usually compared using the area under the receiver operating characteristic ( ROC ) curve. On the other hand, choosing the best threshold for practical use is a complex task, due to uncertain and context-dependent skews in the abundance of positives in nature and in the yields/costs for correct/incorrect classification. We argue that considering a classifier as a player in a zero-sum game allows us to use the minimax principle from game theory to determine the optimal operating point. The proposed classifier threshold corresponds to the intersection between the ROC curve and the descending diagonal in ROC space and yields a minimax accuracy of 1-FPR. Our proposal can be readily implemented in practice, and reveals that the empirical condition for threshold estimation of "specificity equals sensitivity" maximizes robustness against uncertainties in the abundance of positives in nature and classification costs.

Simulated-airline-service flight tests of laminar-flow control with perforated-surface suction system

NASA Technical Reports Server (NTRS)

Maddalon, Dal V.; Braslow, Albert L.

1990-01-01

The effectiveness and practicality of candidate leading edge systems for suction laminar flow control transport airplanes were investigated in a flight test program utilizing a modified JetStar airplane. The leading edge region imposes the most severe conditions on systems required for any type of laminar flow control. Tests of the leading edge systems, therefore, provided definitive results as to the feasibility of active laminar flow control on airplanes. The test airplane was operated under commercial transport operating procedures from various commercial airports and at various seasons of the year.

Practical Cleanroom Operations Constraints

NASA Technical Reports Server (NTRS)

Hughes, David; Ginyard, Amani

2007-01-01

This viewgraph presentation reviews the GSFC Cleanroom Facility i.e., Spacecraft Systems Development and Integration Facility (SSDIF) with particular interest in its use during the development of the Wide Field Camera 3 (WFC3). The SSDIF is described and a diagram of the SSDIF is shown. A Constraint Table was created for consistency within Contamination Control Team. This table is shown. Another table that shows the activities that were allowed during the integration under given WFC3 condition and activity location is presented. Three decision trees are shown for different phases of the work: (1) Hardware Relocation, Hardware Work, and Contamination Control Operations.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Astrophysics Data System (ADS)

Vaughan, W. W.; Green, C. E.

1985-03-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Technical Reports Server (NTRS)

Vaughan, W. W.; Green, C. E.

1985-01-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

Sustaining Culture Change: Experiences in the Green House Model.

PubMed

Bowers, Barbara; Nolet, Kimberly; Jacobson, Nora

2016-02-01

To describe conditions that influence how Green House (GH) organizations are sustaining culture change principles and practices in a sample of GH skilled nursing homes. Primary data were collected at 11 skilled nursing GH organizations from 2012 to 2014. These organizations have adopted the comprehensive and prescriptive GH model of culture change. To develop an understanding of sustainability from the perspective of staff who are immersed in GH daily work, grounded theory qualitative methods were used. Data were collected using semi-structured interviews with 166 staff and observation of house meetings and daily operations. Data were analyzed using grounded dimensional analysis. Organizations varied in their ability to sustain GH principles and practices. An organization's approach to problem solving was central to sustaining the model. Key conditions influenced reinforcement or erosion of GH principles and practices. Reinforcing the GH model requires a highly skilled team of staff with the ability to frequently and collaboratively solve both mundane and complex problems in ways that are consistent with the GH model. This raises questions about the type of human resources practices and policy supports that could assist organizations in sustaining culture change. © Health Research and Educational Trust.

Reliability modelling and analysis of thermal MEMS

NASA Astrophysics Data System (ADS)

Muratet, Sylvaine; Lavu, Srikanth; Fourniols, Jean-Yves; Bell, George; Desmulliez, Marc P. Y.

2006-04-01

This paper presents a MEMS reliability study methodology based on the novel concept of 'virtual prototyping'. This methodology can be used for the development of reliable sensors or actuators and also to characterize their behaviour in specific use conditions and applications. The methodology is demonstrated on the U-shaped micro electro thermal actuator used as test vehicle. To demonstrate this approach, a 'virtual prototype' has been developed with the modeling tools MatLab and VHDL-AMS. A best practice FMEA (Failure Mode and Effect Analysis) is applied on the thermal MEMS to investigate and assess the failure mechanisms. Reliability study is performed by injecting the identified defaults into the 'virtual prototype'. The reliability characterization methodology predicts the evolution of the behavior of these MEMS as a function of the number of cycles of operation and specific operational conditions.

J. Marion Sims and the Vesicovaginal Fistula: Historical Understanding, Medical Ethics, and Modern Political Sensibilities.

PubMed

Wall, L Lewis

To review the historical background surrounding the early work of Dr. J. Marion Sims, who developed the first consistently successful surgical technique for the repair of obstetric vesicovaginal fistulas by operating on a group of young, enslaved, African American women who had this condition between 1846 and 1849. Review of primary source documents on Sims and his operations, early 19th century clinical literature on the treatment of vesicovaginal fistula, the introduction of ether and chloroform anesthesia into surgical practice, and the literature on the early 19th century medical ethics pertaining to surgical innovation. The goals are to understand Sims's operations within the clinical context of the 1840s and to avoid the problems of "presentism," in which beliefs, attitudes, and practices of the 21st century are anachronistically projected backward into the early 19th century. The object is to judge Sims within the context of his time, not to hold him accountable to standards of practice which were not developed until a century after his death. A narrative of what Sims did is presented within the context of the therapeutic options available to those with fistula in the early 19th century. Review of the available material demonstrates that Sims' first fistula operations were legal, that they were carried out with express therapeutic intent for the purpose of repairing these women's injuries, that they conformed to the ethical requirements of his time, and that they were performed with the patients' knowledge, cooperation, assent, and assistance.

Integrating clinical performance improvement across physician organizations: the PhyCor experience.

PubMed

Loeppke, R; Howell, J W

1999-02-01

There is a paucity of literature describing the implementation of clinical performance improvement (CPI) efforts across geographically dispersed multispecialty group practices and independent practice associations. PhyCor, a physician management company based in Nashville, Tennessee, has integrated CPI initiatives into its operating infrastructure. PhyCor CPI INITIATIVES: The strategic framework guiding PhyCor's CPI initiatives is built around a physician-driven, patient-centered model. Physician/administrator leadership teams develop and implement a clinical and financial strategic plan for performance improvement; adopt local clinical and operational performance indicators; and agree on and gain consensus with local physician champions to engage in CPI initiatives. The area/regional leadership councils integrate and coordinate regional medical management and CPI initiatives among local groups and independent practice associations. In addition to these councils and a national leadership council, condition-specific care management councils have also been established. These councils develop condition-specific protocols and outcome measures and lead the implementation of CPI initiatives at their own clinics. Key resources supporting CPI initiatives include information/knowledge management, education and training, and patient education and consumer decision support. Localized efforts in both the asthma care and diabetes management initiatives have led to some preliminary improvements in quality of care indicators. Physician leadership and strategic vision, CPI-oriented organizational infrastructure, broad-based physician involvement in CPI, providing access to performance data, parallel incentives, and creating a sense of urgency for accelerated change are all critical success factors to the implementation of CPI strategies at the local, regional, and national levels.

Clustering for unsupervised fault diagnosis in nuclear turbine shut-down transients

NASA Astrophysics Data System (ADS)

Baraldi, Piero; Di Maio, Francesco; Rigamonti, Marco; Zio, Enrico; Seraoui, Redouane

2015-06-01

Empirical methods for fault diagnosis usually entail a process of supervised training based on a set of examples of signal evolutions "labeled" with the corresponding, known classes of fault. However, in practice, the signals collected during plant operation may be, very often, "unlabeled", i.e., the information on the corresponding type of occurred fault is not available. To cope with this practical situation, in this paper we develop a methodology for the identification of transient signals showing similar characteristics, under the conjecture that operational/faulty transient conditions of the same type lead to similar behavior in the measured signals evolution. The methodology is founded on a feature extraction procedure, which feeds a spectral clustering technique, embedding the unsupervised fuzzy C-means (FCM) algorithm, which evaluates the functional similarity among the different operational/faulty transients. A procedure for validating the plausibility of the obtained clusters is also propounded based on physical considerations. The methodology is applied to a real industrial case, on the basis of 148 shut-down transients of a Nuclear Power Plant (NPP) steam turbine.

Determining water and nitrogen balances for beneficial management practices using lysimeters at Wagna test site (Austria).

PubMed

Klammler, Gernot; Fank, Johann

2014-11-15

The shallow Murtal aquifer south of Graz, Austria, provides easily withdrawable groundwater, which is supplied as drinking water without any chemical treatment. The aquifer is also used intensively by agriculture. Common agricultural management practices are the main source for diffuse nitrogen leaching and high groundwater nitrate concentrations. To safeguard the coexisting use of these two important resources, lysimeters are operated at the agricultural test site Wagna, Austria, and the influence of two beneficial management practices--low nitrogen input and organic farming--on nitrogen leaching towards groundwater is investigated. The technical lysimeter design as presented here consists of: (1) high-resolution weighing cells, (2) a suction controlled lower boundary condition for sucking off seepage water, thus emulating undisturbed field conditions, (3) comparative soil temperature, water content and matrix potential measurements inside and outside the lysimeter at different depths, (4) an installation of the lysimeters directly into test plots and (5) a removable upper lysimeter ring enabling machinery soil tillage. Our results indicate that oasis effects or fringe effects of the lysimeter cylinder on unsaturated water flow did not occur. Another lysimeter cultivated with lawn is operated for observing grass-reference evapotranspiration, which resulted in good agreement with calculated grass-reference evapotranspiration according to the FAO-Penman-Monteith method. We conclude that lysimeters installed at Wagna test site did not show any fringe effects and, thus, are appropriate tools for measuring water balance elements and nitrogen leaching of arable and grass land at point scale. Furthermore, our results for the period of 2005 to 2011 show that beneficial management practices reduced nitrate leaching and, hence, may allow for a sustainable coexistence of drinking water supply and agriculture in the Murtal aquifer. Copyright © 2014 Elsevier B.V. All rights reserved.

A Safe Place to Stay Sharp: Action Learning Meets Cooperative Inquiry in the Service of NHS OD Capacity Building

ERIC Educational Resources Information Center

Traeger, James; Norgate, Carolyn

2015-01-01

This is an account of practice. It explores the meeting point between action learning and action research, as a way of doing capacity building in organisational development (OD) in the NHS in the UK. The authors were part of a short cooperative inquiry (Heron, J. 1996. "Co-operative Inquiry: Research into the Human Condition." London:…

Applying Lean principles and Kaizen rapid improvement events in public health practice.

PubMed

Smith, Gene; Poteat-Godwin, Annah; Harrison, Lisa Macon; Randolph, Greg D

2012-01-01

This case study describes a local home health and hospice agency's effort to implement Lean principles and Kaizen methodology as a rapid improvement approach to quality improvement. The agency created a cross-functional team, followed Lean Kaizen methodology, and made significant improvements in scheduling time for home health nurses that resulted in reduced operational costs, improved working conditions, and multiple organizational efficiencies.

Ultraviolet acousto-optic programmable dispersive filter laser pulse shaping in KDP.

PubMed

Coudreau, Sebastien; Kaplan, Daniel; Tournois, Pierre

2006-06-15

An acousto-optic programmable dispersive filter pulse shaper has been designed using KDP material for operation in the 200-500 nm wavelength range. With an acousto-optic interaction length of 72 mm, a spectral resolution of 0.15 nm has been measured to be consistent with theoretical predictions. Theory and experiments indicate that diffraction efficiencies up to 50% are expected in practical experimental conditions.

Herzberg, Hygiene and the Motivation to Reuse: Towards a Three-Factor Theory to Explain Motivation to Share and Use OER

ERIC Educational Resources Information Center

Pegler, Chris

2012-01-01

The list of barriers and enablers that influence the use of open educational resources (OER) is extensive. Factors and influences relating to reuse may have been noted within projects, operating within a short time span, or within specific conditions which limit generalizability. Evidence of reuse in practice has often emerged as isolated examples…

Co-Optima Project E2.2.2: Accelerate Development of ACI/LTC Fuel Effects on RCCI Combustion.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musculus, Mark P.

Many advanced combustion approaches have demonstrated potential for achieving diesel-like thermal efficiency but with much lower pollutant emissions of particulate matter (PM) and nitrogen oxides (NOx). RCCI is one advanced combustion concept, which makes use of in-cylinder blending of two fuels with differing reactivity for improved control of the combustion phasing and rate (Reitz et al., 2015). Previous research and development at ORNL has demonstrated successful implementation of RCCI on a light-duty multi-cylinder engine over a wide range of operating conditions (Curran et al., 2015). Several challenges were encountered when extending the research to practical applications, including limits to themore » operating range, both for high and low loads. Co-optimizing the engine and fuel aspects of the RCCI approach might allow these operating limits to be overcome. The in-cylinder mechanisms by which fuel properties interact with engine operating condition variables is not well understood, however, in part because RCCI is a new combustion concept that is still being developed, and limited data have been acquired to date, especially using in-cylinder optical/imaging diagnostics. The objective of this work is to use in-cylinder diagnostics in a heavy-duty single-cylinder optical engine at SNL to understand the interplay between fuel properties and engine hardware and operating conditions for RCCI in general, and in particular for the light-duty multi-cylinder all-metal RCCI engine experiments at ORNL.« less

49 CFR 240.125 - Criteria for testing knowledge.

Code of Federal Regulations, 2010 CFR

2010-10-01

... practices for the safe operation of trains. (c) The testing methods selected by the railroad shall be: (1) Designed to examine a person's knowledge of the railroad's rules and practices for the safe operation of...) Personal safety practices; (ii) Operating practices; (iii) Equipment inspection practices; (iv) Train...

Mathematical modeling of non-stationary gas flow in gas pipeline

NASA Astrophysics Data System (ADS)

Fetisov, V. G.; Nikolaev, A. K.; Lykov, Y. V.; Duchnevich, L. N.

2018-03-01

An analysis of the operation of the gas transportation system shows that for a considerable part of time pipelines operate in an unsettled regime of gas movement. Its pressure and flow rate vary along the length of pipeline and over time as a result of uneven consumption and selection, switching on and off compressor units, shutting off stop valves, emergence of emergency leaks. The operational management of such regimes is associated with difficulty of reconciling the operating modes of individual sections of gas pipeline with each other, as well as with compressor stations. Determining the grounds that cause change in the operating mode of the pipeline system and revealing patterns of these changes determine the choice of its parameters. Therefore, knowledge of the laws of changing the main technological parameters of gas pumping through pipelines in conditions of non-stationary motion is of great importance for practice.

Developing practical knowledge content of emergency nursing professionals.

PubMed

Chu, Wen; Hsu, Li-Ling

2011-06-01

There is a paucity of published research on clinical or practical nursing knowledge. The ways that nurses acquire, develop, and maintain emergency room (ER) nursing care skills is a research area, in particular, that deserves further investigation. This study examined clinical setting learning processes to better understand the practical knowledge content of ER nurses. This study used a phenomenological approach and in-depth interviews of 10 nurses. Each participant had at least 3 years of ER experience. Researchers used Moustakas' method to analyze interview data. Findings were checked for credibility, transferability, dependability, and confirmability. The authors identified four major practical knowledge themes for ER professionals. These were (a) basic emergency treatment procedure routines and symptom management; (b) disease mechanisms, pharmacodynamics, and treatment responses; (c) newly identified diseases, updated emergency treatments and techniques, and medical treatment discussions; and (d) identifying nursing values including nursing attitudes and continuing patient care. Participants in this study had experience with the first three themes and successfully combined various types of nursing knowledge in their nursing care duties. Only few participants indicated experience with the fourth theme. Findings clarify that clinical or practical knowledge in ER nurses evolves first from declarative knowledge (e.g., basic emergency treatment routines and operating procedures) to procedural knowledge (e.g., instructions from supervisors, actual practice, and drills) to conditional knowledge (e.g., observation and treatment involving direct interactions with patients). Nurses should combine and apply the various knowledge types in their nursing practice to assess comprehensively each patient's condition and administer effective treatment and service.

Function word repetitions emerge when speakers are operantly conditioned to reduce frequency of silent pauses.

PubMed

Howell, P; Sackin, S

2001-09-01

Beattie and Bradbury (1979) reported a study in which, in one condition, they punished speakers when they produced silent pauses (by lighting a light they were supposed to keep switched off). They found speakers were able to reduce silent pauses and that this was not achieved at the expense of reduced overall speech rate. They reported an unexpected increase in word repetition rate. A recent theory proposed by Howell, Au-Yeung, and Sackin (1999) predicts that the change in word repetition rate will occur on function, not content words. This hypothesis is tested and confirmed. The results are used to assess the theory and to consider practical applications of this conditioning procedure.

An adaptive ARX model to estimate the RUL of aluminum plates based on its crack growth

NASA Astrophysics Data System (ADS)

Barraza-Barraza, Diana; Tercero-Gómez, Víctor G.; Beruvides, Mario G.; Limón-Robles, Jorge

2017-01-01

A wide variety of Condition-Based Maintenance (CBM) techniques deal with the problem of predicting the time for an asset fault. Most statistical approaches rely on historical failure data that might not be available in several practical situations. To address this issue, practitioners might require the use of self-starting approaches that consider only the available knowledge about the current degradation process and the asset operating context to update the prognostic model. Some authors use Autoregressive (AR) models for this purpose that are adequate when the asset operating context is constant, however, if it is variable, the accuracy of the models can be affected. In this paper, three autoregressive models with exogenous variables (ARX) were constructed, and their capability to estimate the remaining useful life (RUL) of a process was evaluated following the case of the aluminum crack growth problem. An existing stochastic model of aluminum crack growth was implemented and used to assess RUL estimation performance of the proposed ARX models through extensive Monte Carlo simulations. Point and interval estimations were made based only on individual history, behavior, operating conditions and failure thresholds. Both analytic and bootstrapping techniques were used in the estimation process. Finally, by including recursive parameter estimation and a forgetting factor, the ARX methodology adapts to changing operating conditions and maintain the focus on the current degradation level of an asset.

Fluorescence excitation-emission matrix spectroscopy for degradation monitoring of machinery lubricants

NASA Astrophysics Data System (ADS)

Sosnovski, Oleg; Suresh, Pooja; Dudelzak, Alexander E.; Green, Benjamin

2018-02-01

Lubrication oil is a vital component of heavy rotating machinery defining the machine's health, operational safety and effectiveness. Recently, the focus has been on developing sensors that provide real-time/online monitoring of oil condition/lubricity. Industrial practices and standards for assessing oil condition involve various analytical methods. Most these techniques are unsuitable for online applications. The paper presents the results of studying degradation of antioxidant additives in machinery lubricants using Fluorescence Excitation-Emission Matrix (EEM) Spectroscopy and Machine Learning techniques. EEM Spectroscopy is capable of rapid and even standoff sensing; it is potentially applicable to real-time online monitoring.

Locomotive dynamic performance under traction/braking conditions considering effect of gear transmissions

NASA Astrophysics Data System (ADS)

Chen, Zaigang; Zhai, Wanming; Wang, Kaiyun

2018-07-01

Traction or braking operations are usually applied to trains or locomotives for acceleration, speed adjustment, and stopping. During these operations, gear transmission equipment plays a very significant role in the delivery of traction or electrical braking power. Failures of the gear transmissions are likely to cause power loses and even threaten the operation safety of the train. Its dynamic performance is closely related to the normal operation and service safety of the entire train, especially under some emergency braking conditions. In this paper, a locomotive-track coupled vertical-longitudinal dynamics model is employed with considering the dynamic action from the gear transmissions. This dynamics model enables the detailed analysis and more practical simulation on the characteristics of power transmission path, namely motor-gear transmission-wheelset-longitudinal motion of locomotive, especially for traction or braking conditions. Multi-excitation sources, such as time-varying mesh stiffness and nonlinear wheel-rail contact excitations, are considered in this study. This dynamics model is then validated by comparing the simulated results with the experimental test results under braking conditions. The calculated results indicate that involvement of gear transmission could reveal the load reduction of the wheelset due to transmitted forces. Vibrations of the wheelset and the motor are dominated by variation of the gear dynamic mesh forces in the low speed range and by rail geometric irregularity in the higher speed range. Rail vertical geometric irregularity could also cause wheelset longitudinal vibrations, and do modulations to the gear dynamic mesh forces. Besides, the hauling weight has little effect on the locomotive vibrations and the dynamic mesh forces of the gear transmissions for both traction and braking conditions under the same running speed.

Crew and Display Concepts Evaluation for Synthetic / Enhanced Vision Systems

NASA Technical Reports Server (NTRS)

Bailey, Randall E.; Kramer, Lynda J.; Prinzel, Lawrence J., III

2006-01-01

NASA s Synthetic Vision Systems (SVS) project is developing technologies with practical applications that strive to eliminate low-visibility conditions as a causal factor to civil aircraft accidents and replicate the operational benefits of clear day flight operations, regardless of the actual outside visibility condition. Enhanced Vision System (EVS) technologies are analogous and complementary in many respects to SVS, with the principle difference being that EVS is an imaging sensor presentation, as opposed to a database-derived image. The use of EVS in civil aircraft is projected to increase rapidly as the Federal Aviation Administration recently changed the aircraft operating rules under Part 91, revising the flight visibility requirements for conducting operations to civil airports. Operators conducting straight-in instrument approach procedures may now operate below the published approach minimums when using an approved EVS that shows the required visual references on the pilot s Head-Up Display. An experiment was conducted to evaluate the complementary use of SVS and EVS technologies, specifically focusing on new techniques for integration and/or fusion of synthetic and enhanced vision technologies and crew resource management while operating under the newly adopted FAA rules which provide operating credit for EVS. Overall, the experimental data showed that significant improvements in SA without concomitant increases in workload and display clutter could be provided by the integration and/or fusion of synthetic and enhanced vision technologies for the pilot-flying and the pilot-not-flying.

Robust modeling and performance analysis of high-power diode side-pumped solid-state laser systems.

PubMed

Kashef, Tamer; Ghoniemy, Samy; Mokhtar, Ayman

2015-12-20

In this paper, we present an enhanced high-power extrinsic diode side-pumped solid-state laser (DPSSL) model to accurately predict the dynamic operations and pump distribution under different practical conditions. We introduce a new implementation technique for the proposed model that provides a compelling incentive for the performance assessment and enhancement of high-power diode side-pumped Nd:YAG lasers using cooperative agents and by relying on the MATLAB, GLAD, and Zemax ray tracing software packages. A large-signal laser model that includes thermal effects and a modified laser gain formulation and incorporates the geometrical pump distribution for three radially arranged arrays of laser diodes is presented. The design of a customized prototype diode side-pumped high-power laser head fabricated for the purpose of testing is discussed. A detailed comparative experimental and simulation study of the dynamic operation and the beam characteristics that are used to verify the accuracy of the proposed model for analyzing the performance of high-power DPSSLs under different conditions are discussed. The simulated and measured results of power, pump distribution, beam shape, and slope efficiency are shown under different conditions and for a specific case, where the targeted output power is 140 W, while the input pumping power is 400 W. The 95% output coupler reflectivity showed good agreement with the slope efficiency, which is approximately 35%; this assures the robustness of the proposed model to accurately predict the design parameters of practical, high-power DPSSLs.

Training simulator for retinal laser photocoagulation: a new approach for surgeons' apprenticeships

NASA Astrophysics Data System (ADS)

Dubois, Patrick; Meseure, Philippe; Peugnet, Frederic; Rouland, Jean-Francois

1998-06-01

Retinal laser photocoagulation is a current practice in many eye diseases therapy. Its mastering requires a specific training usually made on actual patients with some risks. The authors present a new device aimed to deliver a complete training separated from the therapeutic practice. This training simulator is built around the actual instrument to comply with the required realism. The instrumental functionalities of the device give the residents the same operating conditions as in the actual practice. The eye fundus visualization is simulated by virtual images, based on actual fundus pictures. They are computed at the rate of 10-12 frames/second according to the adjustments and manipulations of the 3-mirror lens made by the operator. All the pictures are combined in a fundus database planned to collect a wide variety of pathologies. The pedagogical functionalities are gathered in the user's interface. The two major guidelines of the developed software was to achieve an easy to use interface and to enforce no 'school dependent' rules of valuation. This new pedagogical instrument runs on PC micro-computers which allows a low- cost technology and could provide a practical training to retinal photocoagulation without the patient. A clinical validation of its pedagogical efficiency is submitted in another abstract.

Influence network linkages across implementation strategy conditions in a randomized controlled trial of two strategies for scaling up evidence-based practices in public youth-serving systems.

PubMed

Palinkas, Lawrence A; Holloway, Ian W; Rice, Eric; Brown, C Hendricks; Valente, Thomas W; Chamberlain, Patricia

2013-11-14

Given the importance of influence networks in the implementation of evidence-based practices and interventions, it is unclear whether such networks continue to operate as sources of information and advice when they are segmented and disrupted by randomization to different implementation strategy conditions. The present study examines the linkages across implementation strategy conditions of social influence networks of leaders of youth-serving systems in 12 California counties participating in a randomized controlled trial of community development teams (CDTs) to scale up use of an evidence-based practice. Semi-structured interviews were conducted with 38 directors, assistant directors, and program managers of county probation, mental health, and child welfare departments. A web-based survey collected additional quantitative data on information and advice networks of study participants. A mixed-methods approach to data analysis was used to create a sociometric data set (n = 176) to examine linkages between treatment and standard conditions. Of those network members who were affiliated with a county (n = 137), only 6 (4.4%) were directly connected to a member of the opposite implementation strategy condition; 19 (13.9%) were connected by two steps or fewer to a member of the opposite implementation strategy condition; 64 (46.7%) were connected by three or fewer steps to a member of the opposite implementation strategy condition. Most of the indirect steps between individuals who were in different implementation strategy conditions were connections involving a third non-county organizational entity that had an important role in the trial in keeping the implementation strategy conditions separate. When these entities were excluded, the CDT network exhibited fewer components and significantly higher betweenness centralization than did the standard condition network. Although the integrity of the RCT in this instance was not compromised by study participant influence networks, RCT designs should consider how influence networks may extend beyond boundaries established by the randomization process in implementation studies. NCT00880126.

How do strategic decisions and operative practices affect operating room productivity?

PubMed

Peltokorpi, Antti

2011-12-01

Surgical operating rooms are cost-intensive parts of health service production. Managing operating units efficiently is essential when hospitals and healthcare systems aim to maximize health outcomes with limited resources. Previous research about operating room management has focused on studying the effect of management practices and decisions on efficiency by utilizing mainly modeling approach or before-after analysis in single hospital case. The purpose of this research is to analyze the synergic effect of strategic decisions and operative management practices on operating room productivity and to use a multiple case study method enabling statistical hypothesis testing with empirical data. 11 hypotheses that propose connections between the use of strategic and operative practices and productivity were tested in a multi-hospital study that included 26 units. The results indicate that operative practices, such as personnel management, case scheduling and performance measurement, affect productivity more remarkably than do strategic decisions that relate to, e.g., units' size, scope or academic status. Units with different strategic positions should apply different operative practices: Focused hospital units benefit most from sophisticated case scheduling and parallel processing whereas central and ambulatory units should apply flexible working hours, incentives and multi-skilled personnel. Operating units should be more active in applying management practices which are adequate for their strategic orientation.

Indigenous knowledge of shea processing and quality perception of shea products in Benin.

PubMed

Honfo, Fernande G; Linnemann, Anita R; Akissoe, Noël H; Soumanou, Mohamed M; van Boekel, Martinus A J S

2012-01-01

A survey among 246 people belonging to 14 ethnic groups and living in 5 different parklands in Benin revealed different practices to process shea kernels (namely boiling followed sun drying and smoking) and extract shea butter. A relation between parklands, gathering period, and sun-drying conditions was established. Moisture content and appearance of kernels were the selection criteria for users of shea kernels; color was the main characteristic to buy butter. Constraints to be solved are long processing times, lack of milling equipment and high water requirements. Best practices for smoking, sun drying, and roasting operations need to be established for further improvement.

Statistics of vacuum breakdown in the high-gradient and low-rate regime

NASA Astrophysics Data System (ADS)

Wuensch, Walter; Degiovanni, Alberto; Calatroni, Sergio; Korsbäck, Anders; Djurabekova, Flyura; Rajamäki, Robin; Giner-Navarro, Jorge

2017-01-01

In an increasing number of high-gradient linear accelerator applications, accelerating structures must operate with both high surface electric fields and low breakdown rates. Understanding the statistical properties of breakdown occurrence in such a regime is of practical importance for optimizing accelerator conditioning and operation algorithms, as well as of interest for efforts to understand the physical processes which underlie the breakdown phenomenon. Experimental data of breakdown has been collected in two distinct high-gradient experimental set-ups: A prototype linear accelerating structure operated in the Compact Linear Collider Xbox 12 GHz test stands, and a parallel plate electrode system operated with pulsed DC in the kV range. Collected data is presented, analyzed and compared. The two systems show similar, distinctive, two-part distributions of number of pulses between breakdowns, with each part corresponding to a specific, constant event rate. The correlation between distance and number of pulses between breakdown indicates that the two parts of the distribution, and their corresponding event rates, represent independent primary and induced follow-up breakdowns. The similarity of results from pulsed DC to 12 GHz rf indicates a similar vacuum arc triggering mechanism over the range of conditions covered by the experiments.

Geospace monitoring for space weather research and operation

NASA Astrophysics Data System (ADS)

Nagatsuma, Tsutomu

2017-10-01

Geospace, a space surrounding the Earth, is one of the key area for space weather. Because geospace environment dynamically varies depending on the solar wind conditions. Many kinds of space assets are operating in geospace for practical purposes. Anomalies of space assets are sometimes happened because of space weather disturbances in geospace. Therefore, monitoring and forecasting of geospace environment is very important tasks for NICT's space weather research and development. To monitor and to improve forecasting model, fluxgate magnetometers and HF radars are operated by our laboratory, and its data are used for our research work, too. We also operate real-time data acquisition system for satellite data, such as DSCOVR, STEREO, and routinely received high energy particle data from Himawari-8. Based on these data, we are monitoring current condition of geomagnetic disturbances, and that of radiation belt. Using these data, we have developed empirical models for relativistic electron flux at GEO and inner magnetosphere. To provide userfriendly information , we are trying to develop individual spacecraft anomaly risk estimation tool based on combining models of space weather and those of spacecraft charging, Current status of geospace monitoring, forecasting, and research activities are introduced.

Medical scientists' information practices in the research work context.

PubMed

Roos, Annikki

2015-03-01

The aim of the study was to investigate the information practices of medical scientists in the research work context. This is a qualitative study based on semi-structured interviews. The interviews were transcribed and analysed in a web tool for qualitative analysis. Activity theory was used as the theoretical framework. The generating motives for the information related activity come from the core activity, research work. The motives result in actions such as searching and using information. Usability, accessibility and ease of use are the most important conditions that determine information related operations. Medical scientists search and use information most of all in the beginning and at the end of the research work. Information practices appear as an instrument producing activity to the central activity. Information services should be embedded in this core activity and in practice libraries should follow researchers' workflow and embed their tools and services in it. © 2015 Health Libraries Journal.

Behavior of Materials Under Conditions of Thermal Stress

NASA Technical Reports Server (NTRS)

Manson, S S

1954-01-01

A review is presented of available information on the behavior of brittle and ductile materials under conditions of thermal stress and thermal shock. For brittle materials, a simple formula relating physical properties to thermal-shock resistance is derived and used to determine the relative significance of two indices currently in use for rating materials. For ductile materials, thermal-shock resistance depends upon the complex interrelation among several metallurgical variables which seriously affect strength and ductility. These variables are briefly discussed and illustrated from literature sources. The importance of simulating operating conditions in tests for rating materials is especially to be emphasized because of the importance of testing conditions in metallurgy. A number of practical methods that have been used to minimize the deleterious effects of thermal stress and thermal shock are outlined.

Operation characteristic of a heat pump of mechanical vapor recompression propelled by fans and its performance analysis applied to waste-water treatment

NASA Astrophysics Data System (ADS)

Weike, Pang; Wenju, Lin; Qilin, Pan; Wenye, Lin; Qunte, Dai; Luwei, Yang; Zhentao, Zhang

2014-01-01

In this paper, a set of heat pump (called as Mechanical Vapor Recompression, MVR) propelled by a centrifugal fan is tested and it shows some special characteristic when it works together with a falling film evaporator. Firstly, an analysis of the fan's suction and discharge parameters at stable state, such as its pressure and temperature, indicates that a phenomenon of wet compression is probably to appear during vapor compression. As a result, superheat after saturated vapor is compressed is eliminated, which reduces discharge temperature of the system. It is because drops boil away and absorb the super heat into their latent heat during vapor compression. Meanwhile, drops in the suction vapor add to the compressed vapor, which increase the given heat of the MVR heat pump. Next, assistant electric heat could adjust and keep steady of the operating pressure and temperature of an MVR heat pump. With the evaporation temperature up to be high, heat balance is broken and supplement heat needs to increase. Thirdly, the performance of an MVR heat pump is affect by the balance of falling film and evaporation that has an effect on heat transfer. Then, two parameters standing for the performance are measured as it runs in practical condition. The two important parameters are consumptive electricity power and productive water capacity. According to theoretical work in ideal condition by calculation and fan's input power by measure as running, adiabatic efficiency (ηad) of a centrifugal fan is calculated when it is applied in a heat pump of MVR. Following, based on ηad, practical SMER and COP of an MVR heat pump are discovered to be correlative with it. Finally, in dependence on productive water in theory and in practice, displacement efficiency (ηv) of centrifugal fans is obtained when compressing vapor, and so provide some references of matching a fan for an MVR heat pump. On the other hand, it is helpful to research and develop MVR heat pumps, and also to check electricity power consumption while operating practically in light of electric motor efficiency (ηe) and ηad.

Fiber-optic instrumentation: Cryogenic sensor model description. [for measurement of conditions in cryogenic liquid propellant tanks

NASA Technical Reports Server (NTRS)

Sharma, M. M.

1979-01-01

An assessment and determination of technology requirements for developing a demonstration model to evaluate feasibility of practical cryogenic liquid level, pressure, and temperature sensors is presented. The construction of a demonstration model to measure characteristics of the selected sensor and to develop test procedures are discussed as well as the development of an appropriate electronic subsystem to operate the sensors.

Numerical study of cold filling and tube deformation in the molten salt receiver

NASA Astrophysics Data System (ADS)

Xu, Tingting; Zhang, Gongchen; Peniguel, Christophe; Liao, Zhirong; Li, Xin; Lu, Jiahui; Wang, Zhifeng

2017-06-01

Molten salt tube cold filling is one way to accelerate the startup of molten salt Concentrated Solar Power (CSP) plant. This practical operation may induce salt solidification and large thermal stress due to tube's large temperature difference. This paper presents the cold filling study and the induced thermal stress quantitatively through simulation approaches. Physical mechanisms and safe working criteria are identified under certain conditions.

Multiobjective optimization of urban water resources: Moving toward more practical solutions

NASA Astrophysics Data System (ADS)

Mortazavi, Mohammad; Kuczera, George; Cui, Lijie

2012-03-01

The issue of drought security is of paramount importance for cities located in regions subject to severe prolonged droughts. The prospect of "running out of water" for an extended period would threaten the very existence of the city. Managing drought security for an urban water supply is a complex task involving trade-offs between conflicting objectives. In this paper a multiobjective optimization approach for urban water resource planning and operation is developed to overcome practically significant shortcomings identified in previous work. A case study based on the headworks system for Sydney (Australia) demonstrates the approach and highlights the potentially serious shortcomings of Pareto optimal solutions conditioned on short climate records, incomplete decision spaces, and constraints to which system response is sensitive. Where high levels of drought security are required, optimal solutions conditioned on short climate records are flawed. Our approach addresses drought security explicitly by identifying approximate optimal solutions in which the system does not "run dry" in severe droughts with expected return periods up to a nominated (typically large) value. In addition, it is shown that failure to optimize the full mix of interacting operational and infrastructure decisions and to explore the trade-offs associated with sensitive constraints can lead to significantly more costly solutions.

Cointegration as a data normalization tool for structural health monitoring applications

NASA Astrophysics Data System (ADS)

Harvey, Dustin Y.; Todd, Michael D.

2012-04-01

The structural health monitoring literature has shown an abundance of features sensitive to various types of damage in laboratory tests. However, robust feature extraction in the presence of varying operational and environmental conditions has proven to be one of the largest obstacles in the development of practical structural health monitoring systems. Cointegration, a technique adapted from the field of econometrics, has recently been introduced to the SHM field as one solution to the data normalization problem. Response measurements and feature histories often show long-run nonstationarity due to fluctuating temperature, load conditions, or other factors that leads to the occurrence of false positives. Cointegration theory allows nonstationary trends common to two or more time series to be modeled and subsequently removed. Thus, the residual retains sensitivity to damage with dependence on operational and environmental variability removed. This study further explores the use of cointegration as a data normalization tool for structural health monitoring applications.

[The development and implementation of polymerase chain reaction to detect in real-time operation mode yersinia pestis in field material].

PubMed

Afanas'ev, M V; Chipanin, E V; Shestakov, V E; Denisov, A V; Fomina, L A; Ostiak, A S; Balakhonov, S V

2013-03-01

The article presents the results of development and practical implementation of system of polymerase chain reaction testing in real-time operation mode to detect agent of plague infield material. In laboratory conditions the system demonstrated good results and hence it was applied in conditions of field laboratory of epidemiologic team during planned epizootologic examination of Gorno-Altaisk hot spot of plague. The sampling consisted of more than 1400 objects. It was demonstrated that high sensitivity and specificity is immanent to proposed system. The adaptation of the system to the real time amplifier "Smart Cycler" (Cephid, USA) having some specific technical characteristics makes it possible to consider the proposed test-system as an effective sensitive and precise instrument for screening studies in the process of regular epizootologic examinations of hot spots of plague.

Literature review for oxalate oxidation processes and plutonium oxalate solubility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nash, C. A.

2015-10-01

A literature review of oxalate oxidation processes finds that manganese(II)-catalyzed nitric acid oxidation of oxalate in precipitate filtrate is a viable and well-documented process. The process has been operated on the large scale at Savannah River in the past, including oxidation of 20 tons of oxalic acid in F-Canyon. Research data under a variety of conditions show the process to be robust. This process is recommended for oxalate destruction in H-Canyon in the upcoming program to produce feed for the MOX facility. Prevention of plutonium oxalate precipitation in filtrate can be achieved by concentrated nitric acid/ferric nitrate sequestration of oxalate.more » Organic complexants do not appear practical to sequester plutonium. Testing is proposed to confirm the literature and calculation findings of this review at projected operating conditions for the upcoming campaign.« less

Thermal modal analysis of novel non-pneumatic mechanical elastic wheel based on FEM and EMA

NASA Astrophysics Data System (ADS)

Zhao, Youqun; Zhu, Mingmin; Lin, Fen; Xiao, Zhen; Li, Haiqing; Deng, Yaoji

2018-01-01

A combination of Finite Element Method (FEM) and Experiment Modal Analysis (EMA) have been employed here to characterize the structural dynamic response of mechanical elastic wheel (ME-Wheel) operating under a specific thermal environment. The influence of high thermal condition on the structural dynamic response of ME-Wheel is investigated. The obtained results indicate that the EMA results are in accordance with those obtained using the proposed Finite Element (FE) model, indicting the high reliability of this FE model applied in analyzing the modal of ME-Wheel working under practical thermal environment. It demonstrates that the structural dynamic response of ME-Wheel operating under a specific thermal condition can be predicted and evaluated using the proposed analysis method, which is beneficial for the dynamic optimization design of the wheel structure to avoid tire temperature related vibration failure and improve safety of tire.

Human Factors for Situation Assessment in Grid Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guttromson, Ross T.; Schur, Anne; Greitzer, Frank L.

2007-08-08

Executive Summary Despite advances in technology, power system operators must assimilate overwhelming amounts of data to keep the grid operating. Analyses of recent blackouts have clearly demonstrated the need to enhance the operator’s situation awareness (SA). The long-term objective of this research is to integrate valuable technologies into the grid operator environment that support decision making under normal and abnormal operating conditions and remove non-technical barriers to enable the optimum use of these technologies by individuals working alone and as a team. More specifically, the research aims to identify methods and principles to increase SA of grid operators in themore » context of system conditions that are representative or common across many operating entities and develop operationally relevant experimental methods for studying technologies and operational practices which contribute to SA. With increasing complexity and interconnectivity of the grid, the scope and complexity of situation awareness have grown. New paradigms are needed to guide research and tool development aimed to enhance and improve operations. In reviewing related research, operating practices, systems, and tools, the present study established a taxonomy that provides a perspective on research and development surrounding power grid situation awareness and clarifies the field of human factors/SA for grid operations. Information sources that we used to identify critical factors underlying SA included interviews with experienced operational personnel, available historical summaries and transcripts of abnormal conditions and outages (e.g., the August 14, 2003 blackout), scientific literature, and operational policies/procedures and other documentation. Our analysis of August 2003 blackout transcripts and interviews adopted a different perspective than previous analyses of this material, and we complemented this analysis with additional interviews. Based on our analysis and a broad literature review, we advocate a new perspective on SA in terms of sensemaking, also called situated or ecological decision making, where the focus of the investigation is to understand why the decision maker(s) experienced the situation the way they did, or why what they saw made sense to them at the time. This perspective is distinct from the traditional branch of human factors research in the field which focuses more on ergonomics and the transactional relationship between the human operator and the systems. Consistent with our findings from the literature review, we recognized an over-arching need to focus SA research on issues surrounding the concept of shared knowledge; e.g., awareness of what is happening in adjacent areas as well as one’s own area of responsibility. Major findings were: a) Inadequate communication/information sharing is pervasive, b) Information is available, but not used. Many tools and mechanisms exist for operators to build awareness of the physical grid system, yet the transcripts reveal that they still need to call and exchange information with operators of neighboring areas to improve or validate their SA. The specific types of information that they request are quite predictable and, in most cases, cover information that could be available to both operators and reliability coordinators through readily available displays or other data sources, c) Shared Knowledge is Required on Operations/Actions as Well as Physical Status. In an ideal, technologically and organizationally perfect world, every control room and every reliability coordinator may have access to complete data across all regional control areas and yet, there would still be reason for the operators to call each other to gain and improve their SA of power grid operations, and d) Situation Awareness as sensemaking and shared knowledge.« less

Operational momentum in large-number addition and subtraction by 9-month-olds.

PubMed

McCrink, Koleen; Wynn, Karen

2009-08-01

Recent studies on nonsymbolic arithmetic have illustrated that under conditions that prevent exact calculation, adults display a systematic tendency to overestimate the answers to addition problems and underestimate the answers to subtraction problems. It has been suggested that this operational momentum results from exposure to a culture-specific practice of representing numbers spatially; alternatively, the mind may represent numbers in spatial terms from early in development. In the current study, we asked whether operational momentum is present during infancy, prior to exposure to culture-specific representations of numbers. Infants (9-month-olds) were shown videos of events involving the addition or subtraction of objects with three different types of outcomes: numerically correct, too large, and too small. Infants looked significantly longer only at those incorrect outcomes that violated the momentum of the arithmetic operation (i.e., at too-large outcomes in subtraction events and too-small outcomes in addition events). The presence of operational momentum during infancy indicates developmental continuity in the underlying mechanisms used when operating over numerical representations.

Best Practices for Wind Energy Development in the Great Lakes Region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pebbles, Victoria; Hummer, John; Haven, Celia

2011-07-19

This report offers a menu of 18 different, yet complementary, preferred practices and policies. The best practices cover all phases of the wind energy development process - from the policies that allow for wind development, to the sustainable operation of a wind project, to the best practices for decommissioning a spent turbine - including applications for offshore wind. Each best practice describes the opportunities and challenges (pros and cons), and offers a case example that illustrates how that best practice is being utilized by a particular jurisdiction or wind project. The practices described in this publication were selected by amore » diverse group of interests from the Great Lakes Wind Collaborative that included environmental groups, industry, academia, and federal, state and local government regulators. The practices were identified through a year-long process that included a literature review, online survey and interviews with individuals from the public, private and non-profit sectors. Optimally, a suite of these best practices would be applied in an appropriate combination to fit the conditions of a particular wind project or a set of wind projects within a given locality or region.« less

[An Exploration of Working Conditions and Flexible System for Hospital Nurses].

PubMed

Huang, Chung-I; Yu, Chien; Yu, Chin-Cheh

2016-04-01

The lack of sufficient numbers of professional nurses in the healthcare system in Taiwan is an issue that affects the sustainability of this system and that relates closely to working conditions. The present study explores the expectations that nurses hold with regard to working conditions and the operation of a flexible system in hospitals. A literature review and focus-group interviews were used to develop the questionnaire Working Conditions and Flexible System. A total of 1,150 copies of this questionnaire were distributed to practicing nurses using stratified random sampling, with 1,146 valid copies returned for a valid recovery rate of 99.65%. The results show that the expectations of participants concerning working conditions and a flexible system focus on the 6 factors of task, numerical, divisional, temporal, wages, and leading flexibility. The total mean was 4.35 (SD=0.42). The means for the 6 types of flexibility were all greater than 4.0. Participants deemed flexibility to be of high importance. The demographic variables hospital, work location, age, education level, work position, work unit, and total work years all affected the 6 types of flexibility significantly. The present study supports that the retention of nurses is significantly associated with working conditions and the operation of a flexible system. Administrators and mangers must create positive working conditions and a flexible system in order to enhance the retention and career development of nurses.

Distilling entanglement with noisy operations

NASA Astrophysics Data System (ADS)

Chang, Jinho; Bae, Joonwoo; Kwon, Younghun

Entanglement distillation is a fundamental task in quantum information processing. It not only extracts entanglement out of corrupted systems but also leads to protecting systems of interest against intervention with environment. In this work, we consider a realistic scenario of entanglement distillation where noisy quantum operations are applied. In particular, the two-way distillation protocol that tolerates the highest error rate is considered. We show that among all types of noise there are only four equivalence classes according to the distillability condition. Since the four classes are connected by local unitary transformations, our results can be used to improve entanglement distillability in practice when entanglement distillation is performed in a realistic setting.

Feasibility study and preliminary design for fishing (TUNA) vessel fuel storage and distribution. Final report. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-07-01

The report is divided into the following sections: (1) Introduction; (2) Conclusions and Recommendations; (3) Existing Conditions and Facilities for a Fuel Distribution Center; (4) Pacific Ocean Regional Tuna Fisheries and Resources; (5) Fishing Effort in the FSMEEZ 1992-1994; (6) Current Transshipping Operations in the Western Pacific Ocean; (7) Current and Probale Bunkering Practices of United States, Japanese, Koren, and Taiwanese Offshore-Based Vessels Operating in FSM and Adjacent Waters; (8) Shore-Based Fish-Handling/Processing; (9) Fuels Forecast; (10) Fuel Supply, Storage and Distribution; (11) Cost Estimates; (12) Economic Evaluation of Fuel Supply, Storage and Distribution.

Modelling-based identification of factors influencing campylobacters in chicken broiler houses and on carcasses sampled after processing and chilling.

PubMed

Hutchison, M L; Taylor, M J; Tchòrzewska, M A; Ford, G; Madden, R H; Knowles, T G

2017-05-01

To identify production and processing practices that might reduce Campylobacter numbers contaminating chicken broiler carcasses. The numbers of campylobacters were determined on carcass neck skins after processing or in broiler house litter samples. Supplementary information that described farm layouts, farming conditions for individual flocks, the slaughterhouse layouts and operating conditions inside plants was collected, matched with each Campylobacter test result. Statistical models predicting the numbers of campylobacters on neck skins and in litter were constructed. Carcass microbial contamination was more strongly influenced by on-farm production practices compared with slaughterhouse activities. We observed correlations between the chilling, washing and defeathering stages of processing and the numbers of campylobacters on carcasses. There were factors on farm that also correlated with numbers of campylobacters in litter. These included bird gender, the exclusion of dogs from houses, beetle presence in the house litter and the materials used to construct the house frame. Changes in farming practices have greater potential for reducing chicken carcass microbial contamination compared with processing interventions. Routine commercial practices were identified that were correlated with lowered numbers of campylobacters. Consequently, these practices are likely to be both cost-effective and suitable for adoption into established farms and commercial processing. © 2017 The Authors. Journal of Applied Microbiology published by John Wiley & Sons Ltd on behalf of Society for Applied Microbiology.

A methodology for probabilistic remaining creep life assessment of gas turbine components

NASA Astrophysics Data System (ADS)

Liu, Zhimin

Certain gas turbine components operate in harsh environments and various mechanisms may lead to component failure. It is common practice to use remaining life assessments to help operators schedule maintenance and component replacements. Creep is a major failure mechanisms that affect the remaining life assessment, and the resulting life consumption of a component is highly sensitive to variations in the material stresses and temperatures, which fluctuate significantly due to the changes in real operating conditions. In addition, variations in material properties and geometry will result in changes in creep life consumption rate. The traditional method used for remaining life assessment assumes a set of fixed operating conditions at all times, and it fails to capture the variations in operating conditions. This translates into a significant loss of accuracy and unnecessary high maintenance and replacement cost. A new method that captures these variations described above and improves the prediction accuracy of remaining life is developed. First, a metamodel is built to approximate the relationship between variables (operating conditions, material properties, geometry, etc.) and a creep response. The metamodel is developed using Response Surface Method/Design of Experiments methodology. Design of Experiments is an efficient sampling method, and for each sampling point a set of finite element analyses are used to compute the corresponding response value. Next, a low order polynomial Response Surface Equation (RSE) is used to fit these values. Four techniques are suggested to dramatically reduce computational effort, and to increase the accuracy of the RSE: smart meshing technique, automatic geometry parameterization, screening test and regional RSE refinement. The RSEs, along with a probabilistic method and a life fraction model are used to compute current damage accumulation and remaining life. By capturing the variations mentioned above, the new method results in much better accuracy than that available using the traditional method. After further development and proper verification the method should bring significant savings by reducing the number of inspections and deferring part replacement.

Vulnerability of point-of-care test reagents and instruments to environmental stresses: implications for health professionals and developers.

PubMed

Louie, Richard F; Ferguson, William J; Curtis, Corbin M; Vy, John H; Kost, Gerald J

2014-03-01

Strategic integration of point-of-care (POC) diagnostic tools during crisis response can accelerate triage and improve management of victims. Timely differential diagnosis is essential wherever care is provided to rule out or rule in disease, expedite life-saving treatment, and improve utilization of limited resources. POC testing needs to be accurate in any environment in which it is used. Devices are exposed to potentially adverse storage and operating conditions, such as high/low temperature and humidity during emergencies and field rescues. Therefore, characterizing environmental conditions allows technology developers, operators, and responders to understand the broad operational requirements of test reagents, instruments, and equipment in order to improve the quality and delivery of care in complex emergencies, disasters, and austere environmental settings. This review aims to describe the effects of environmental stress on POC testing performance and its impact on decision-making, to describe how to study the effects, and to summarize ways to mitigate the effects of environmental stresses through good laboratory practice, development of robust reagents, and novel thermal packaging solutions.

The path to impact of operational research on tuberculosis control policies and practices in Indonesia

PubMed Central

Probandari, Ari; Widjanarko, Bagoes; Mahendradhata, Yodi; Sanjoto, Hary; Cerisha, Ancila; Nungky, Saverina; Riono, Pandu; Simon, Sumanto; Farid, Muhammad Noor; Giriputra, Sardikin; Putra, Artawan Eka; Burhan, Erlina; Wahyuni, Chatarina U.; Mustikawati, Dyah; Widianingrum, Christina; Tiemersma, Edine W.; Alisjahbana, Bachti

2016-01-01

Background Operational research is currently one of the pillars of the global strategy to control tuberculosis. Indonesia initiated capacity building for operational research on tuberculosis over the last decade. Although publication of the research in peer-reviewed journals is an important indicator for measuring the success of this endeavor, the influence of operational research on policy and practices is considered even more important. However, little is known about the process by which operational research influences tuberculosis control policy and practices. Objective We aimed to investigate the influence of operational research on tuberculosis control policy and practice in Indonesia between 2004 and 2014. Design Using a qualitative study design, we conducted in-depth interviews of 50 researchers and 30 policy makers/program managers and performed document reviews. Transcripts of these interviews were evaluated while applying content analysis. Results Operational research contributed to tuberculosis control policy and practice improvements, including development of new policies, introduction of new practices, and reinforcement of current program policies and practices. However, most of these developments had limited sustainability. The path from the dissemination of research results and recommendations to policy and practice changes was long and complex. The skills, interests, and political power of researchers and policy makers, as well as health system response, could influence the process. Conclusions Operational research contributed to improving tuberculosis control policy and practices. A systematic approach to improve the sustainability of the impact of operational research should be explored. PMID:26928217

The path to impact of operational research on tuberculosis control policies and practices in Indonesia.

PubMed

Probandari, Ari; Widjanarko, Bagoes; Mahendradhata, Yodi; Sanjoto, Hary; Cerisha, Ancila; Nungky, Saverina; Riono, Pandu; Simon, Sumanto; Farid, Muhammad Noor; Giriputra, Sardikin; Putra, Artawan Eka; Burhan, Erlina; Wahyuni, Chatarina U; Mustikawati, Dyah; Widianingrum, Christina; Tiemersma, Edine W; Alisjahbana, Bachti

2016-01-01

Operational research is currently one of the pillars of the global strategy to control tuberculosis. Indonesia initiated capacity building for operational research on tuberculosis over the last decade. Although publication of the research in peer-reviewed journals is an important indicator for measuring the success of this endeavor, the influence of operational research on policy and practices is considered even more important. However, little is known about the process by which operational research influences tuberculosis control policy and practices. We aimed to investigate the influence of operational research on tuberculosis control policy and practice in Indonesia between 2004 and 2014. Using a qualitative study design, we conducted in-depth interviews of 50 researchers and 30 policy makers/program managers and performed document reviews. Transcripts of these interviews were evaluated while applying content analysis. Operational research contributed to tuberculosis control policy and practice improvements, including development of new policies, introduction of new practices, and reinforcement of current program policies and practices. However, most of these developments had limited sustainability. The path from the dissemination of research results and recommendations to policy and practice changes was long and complex. The skills, interests, and political power of researchers and policy makers, as well as health system response, could influence the process. Operational research contributed to improving tuberculosis control policy and practices. A systematic approach to improve the sustainability of the impact of operational research should be explored.

40 CFR 63.11550 - What are my standards and management practices?

Code of Federal Regulations, 2013 CFR

2013-07-01

... of the management practices that they must follow. You may use your standard operating procedures as the management practices plan provided the standard operating procedures include the required... my standards and management practices? (a) If you own or operate new or existing affected sources at...

40 CFR 63.11550 - What are my standards and management practices?

Code of Federal Regulations, 2012 CFR

2012-07-01

... of the management practices that they must follow. You may use your standard operating procedures as the management practices plan provided the standard operating procedures include the required... my standards and management practices? (a) If you own or operate new or existing affected sources at...

40 CFR 63.11550 - What are my standards and management practices?

Code of Federal Regulations, 2011 CFR

2011-07-01

... of the management practices that they must follow. You may use your standard operating procedures as the management practices plan provided the standard operating procedures include the required... my standards and management practices? (a) If you own or operate new or existing affected sources at...

40 CFR 63.11550 - What are my standards and management practices?

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the management practices that they must follow. You may use your standard operating procedures as the management practices plan provided the standard operating procedures include the required... my standards and management practices? (a) If you own or operate new or existing affected sources at...

40 CFR 63.11550 - What are my standards and management practices?

Code of Federal Regulations, 2010 CFR

2010-07-01

... of the management practices that they must follow. You may use your standard operating procedures as the management practices plan provided the standard operating procedures include the required... my standards and management practices? (a) If you own or operate new or existing affected sources at...

The response of nitrous oxide emissions to different operating conditions in activated sludge wastewater treatment plants in Southeastern Brazil.

PubMed

Ribeiro, Renato P; Bueno, Rodrigo F; Piveli, Roque P; Kligerman, Débora C; de Mello, William Z; Oliveira, Jaime L M

2017-11-01

The continuous measurements of N 2 O emissions from the aeration tanks of three activated sludge wastewater treatment plants (WWTPs) operated with biological nitrogen removal (BNR) and non-BNR were performed during the different operating conditions of several parameters, such as aeration, dissolved oxygen (DO) profiling and organic shock loading (with landfill leachate). The nitrification process is the main driving force behind N 2 O emission peaks. There are indications that the variation of the air flow rate influenced N 2 O emissions; high N 2 O emissions denote over-aeration conditions or incomplete nitrification, with accumulation of NO 2 - concentrations. Thus, continuous measurements of N 2 O emissions can provide information on aeration adequacy and the efficiency of complete nitrification, with major focus on DO control, in order to reduce N 2 O emissions. An additional concern is the observed propensity of WWTPs in developing countries to receive landfill leachates in their wastewater systems. This practice could have adverse effects on climate change, since wastewater treatment during periods of organic shock loading emitted significantly higher amounts of N 2 O than without organic shock loading. In short, non-BNR WWTPs are subject to high N 2 O emissions, in contrast to BNR WWTP with controlled nitrification and denitrification processes.

Diagnosis and Prognostic of Wastewater Treatment System Based on Bayesian Network

NASA Astrophysics Data System (ADS)

Li, Dan; Yang, Haizhen; Liang, XiaoFeng

2010-11-01

Wastewater treatment is a complicated and dynamic process. The treatment effect can be influenced by many variables in microbial, chemical and physical aspects. These variables are always uncertain. Due to the complex biological reaction mechanisms, the highly time-varying and multivariable aspects, the diagnosis and prognostic of wastewater treatment system are still difficult in practice. Bayesian network (BN) is one of the best methods for dealing with uncertainty in the artificial intelligence field. Because of the powerful inference ability and convenient decision mechanism, BN can be employed into the model description and influencing factor analysis of wastewater treatment system with great flexibility and applicability.In this paper, taking modified sequencing batch reactor (MSBR) as an analysis object, BN model was constructed according to the influent water quality, operational condition and effluent effect data of MSBR, and then a novel approach based on BN is proposed to analyze the influencing factors of the wastewater treatment system. The approach presented gives an effective tool for diagnosing and predicting analysis of the wastewater treatment system. On the basis of the influent water quality and operational condition, effluent effect can be predicted. Moreover, according to the effluent effect, the influent water quality and operational condition also can be deduced.

Function Word Repetitions Emerge When Speakers Are Operantly Conditioned to Reduce Frequency of Silent Pauses

PubMed Central

Howell, Peter; Sackin, Stevie

2007-01-01

Beattie and Bradbury (1979) reported a study in which, in one condition, they punished speakers when they produced silent pauses (by lighting a light they were supposed to keep switched off). They found speakers were able to reduce silent pauses and that this was not achieved at the expense of reduced overall speech rate. They reported an unexpected increase in word repetition rate. A recent theory proposed by Howell, Au-Yeung, and Sackin (1999) predicts that the change in word repetition rate will occur on function, not content words. This hypothesis is tested and confirmed. The results are used to assess the theory and to consider practical applications of this conditioning procedure. PMID:11529422

Sanitary conditions of food vending sites and food handling practices of street food vendors in Benin City, Nigeria: implication for food hygiene and safety.

PubMed

Okojie, P W; Isah, E C

2014-01-01

To determine the sanitary conditions of vending sites as well as food handling practices of street food vendors in Benin City, Nigeria. A descriptive cross-sectional study was done using an observational checklist and researcher-administered questionnaire. 286 randomly selected vending units were surveyed, and their operators interviewed on their food handling practices. A higher proportion, 259 (90.5%), of the observed vending sites appeared clean. The following sanitary facilities were observed in and around the respective food premises of the respondents: waste bin, 124 (43.4%), refuse dumpsite, 41 (14.3%), wash hand basin, 201 (71.2%), hand towel, 210 (73.4%), and soap, 220 (76.9%). There were also the presence of flies 118, (41.3%), and the presence of rats/cockroaches, 7 (2.4%). Respondents with tertiary education, 5 (38.5%), vended foods in environment with good hygiene status compared to those with secondary, 45 (31.7%), and primary education, 33 (27.3%). There was no statistically significant association between educational status and the hygiene status of food premise (P = 0.362). This study showed that street food vending sites in Benin City were sanitary and that food vendors had good food handling practices.

A ubiquitous reflective e-portfolio architecture.

PubMed

Forte, Marcos; de Souza, Wanderley L; da Silva, Roseli F; do Prado, Antonio F; Rodrigues, Jose F

2013-11-01

In nurse and in medicine courses, the use of reflective portfolios as a pedagogical tool is becoming a common practice; in the last years, this practice has gradually migrated from paper-based to electronic-based portfolios. Current approaches for reflective e-portfolios, however, do not widely operate at outdoor sites, where data networks are limited or nonexistent. Considering that many of the activities related to nurse and medicine courses relate to professional practices conducted in such conditions, these network shortcomings restrict the adoption of e-portfolios. The present study describes the requirements specification, design, implementation, and evaluation of the Ubiquitous Reflective E-Portfolio Architecture, a solution proposed to support the development of systems based on mobile and wired access for both online and offline operation. We have implemented a prototype named Professional Practice Module to evaluate the Ubiquitous Reflective E-Portfolio Architecture; the module was based on requirements observed during the professional practice, the paper-based portfolio in use, and related learning meetings in the Medicine Course of a Brazilian University. The evaluation of the system was carried out with a learning group of 2nd year students of the medicine course, who answered to extensive evaluation questionnaires. The prototype proved to be operational in the activities of the professional practice of the Medicine Course object of the study, including homework tasks, patient care, data sharing, and learning meetings. It also demonstrated to be versatile with respect to the availability of the computer network that, many times, was not accessible. Moreover, the students considered the module useful and easy to use, but pointed out difficulties about the keyboard and the display sizes of the netbook devices, and about their operational system. Lastly, most of the students declared preference for the electronic Professional Practice Module in internal and in group activities, and for the paper-based version while in patient attendance. There is evidence that the environment where the professional practice takes place influences the usage of the e-portfolio. Mobile devices were able to support students in their professional practice; however, these devices present characteristics that must be judiciously selected, otherwise, they may limit the execution of important tasks. The main shortcoming identified during the evaluation tests was about the use of the module, and of the access device, during patient attendance. For this reason, we have envisioned a new version of the Professional Practice Module that shall follow a twofold requisite: by one side, it will include all the features of the module, to be used at the university or in the students' homes; from the other side, it will include only the features that are essential for the practice of patient attendance. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Emergency operations program is an excellent platform to deal with in-hospital operation disaster.

PubMed

Rogers, Frederick B; McCune, William; Jammula, Shreya; Gross, Brian W; Bradburn, Eric H; Riley, Deborah K; Manning, Jeffrey

2017-01-01

Described herein is the utilization of the hospital's Emergency Operations Plan and incident command structure to mitigate damage caused by the sudden loss of the heating, ventilation, and air conditioning system within the entire operating room suite. The ability to ameliorate a devastating situation that occurred during working hours at a busy Level II trauma center can be ascribed to the dedication of the leadership and clinical teams working seamlessly together. Their concerted efforts were augmented by adherence to an established protocol that had been thoroughly substantiated and practiced during numerous training simulations. This resulted in successful and timely resolution of an internal crisis that crippled the surgical capabilities of the sole trauma center in the county. After thorough investigation and identification of the issues that contributed to the malfunction, redundancies were built into the system to ensure that a similar incident did not occur again.

Less can be more: How to make operations more flexible and robust with fewer resources

NASA Astrophysics Data System (ADS)

Haksöz, ćaǧrı; Katsikopoulos, Konstantinos; Gigerenzer, Gerd

2018-06-01

We review empirical evidence from practice and general theoretical conditions, under which simple rules of thumb can help to make operations flexible and robust. An operation is flexible when it responds adaptively to adverse events such as natural disasters; an operation is robust when it is less affected by adverse events in the first place. We illustrate the relationship between flexibility and robustness in the context of supply chain risk. In addition to increasing flexibility and robustness, simple rules simultaneously reduce the need for resources such as time, money, information, and computation. We illustrate the simple-rules approach with an easy-to-use graphical aid for diagnosing and managing supply chain risk. More generally, we recommend a four-step process for determining the amount of resources that decision makers should invest in so as to increase flexibility and robustness.

Operation of magnetically assisted fluidized beds in microgravity and variable gravity: experiment and theory

NASA Technical Reports Server (NTRS)

Sornchamni, T.; Jovanovic, G. N.; Reed, B. P.; Atwater, J. E.; Akse, J. R.; Wheeler, R. R.

2004-01-01

The conversion of solid waste into useful resources in support of long duration manned missions in space presents serious technological challenges. Several technologies, including supercritical water oxidation, microwave powered combustion and fluidized bed incineration, have been tested for the conversion of solid waste. However, none of these technologies are compatible with microgravity or hypogravity operating conditions. In this paper, we present the gradient magnetically assisted fluidized bed (G-MAFB) as a promising operating platform for fluidized bed operations in the space environment. Our experimental and theoretical work has resulted in both the development of a theoretical model based on fundamental principles for the design of the G-MAFB, and also the practical implementation of the G-MAFB in the filtration and destruction of solid biomass waste particles from liquid streams. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

The 'INMARSAT' international maritime satellite communication system

NASA Astrophysics Data System (ADS)

Atserov, Iu. S.

1982-12-01

The history, design, operating characteristics, achievements, and prospects of INMARSAT are discussed. More than 1300 ships are presently equipped to operate within the system, and this number is expected to rise to about 5000 by 1986. The principle of operation involves single coordinating earth stations allocating telephone channels in their zones between other earth stations. The messages reach a common signalling channel with which all ship stations keep in touch. The ship stations are connected to the international telex network. The INMARSAT system enables ships in the automated mode of operation to establish telephone and telegraph comunication with any subscriber on the shore of any country. The quality of the communication is practically independent of the distance between ship and shore at any time of year and under any meteorological conditions. Estimates indicate that the use of satellite communication with ships reduces losses from accidents by 10 percent per year.

Practice Guidelines for Operative Performance Assessments.

PubMed

Williams, Reed G; Kim, Michael J; Dunnington, Gary L

2016-12-01

To provide recommended practice guidelines for assessing single operative performances and for combining results of operative performance assessments into estimates of overall operative performance ability. Operative performance is one defining characteristic of surgeons. Assessment of operative performance is needed to provide feedback with learning benefits to surgical residents in training and to assist in making progress decisions for residents. Operative performance assessment has been a focus of investigation over the past 20 years. This review is designed to integrate findings of this research into a set of recommended operative performance practices. Literature from surgery and from other pertinent research areas (psychology, education, business) was reviewed looking for evidence to inform practice guideline development. Guidelines were created along with a conceptual and scientific foundation for each guideline. Ten guidelines are provided for assessing individual operative performances and 10 are provided for combing data from individual operative performances into overall judgments of operative performance ability. The practice guidelines organize available information to be immediately useful to program directors, to support surgical training, and to provide a conceptual framework upon which to build as the base of pertinent knowledge expands through future research and development efforts.

Experimental determination of the steady-state charging probabilities and particle size conservation in non-radioactive and radioactive bipolar aerosol chargers in the size range of 5-40 nm

NASA Astrophysics Data System (ADS)

Kallinger, Peter; Szymanski, Wladyslaw W.

2015-04-01

Three bipolar aerosol chargers, an AC-corona (Electrical Ionizer 1090, MSP Corp.), a soft X-ray (Advanced Aerosol Neutralizer 3087, TSI Inc.), and an α-radiation-based 241Am charger (tapcon & analysesysteme), were investigated on their charging performance of airborne nanoparticles. The charging probabilities for negatively and positively charged particles and the particle size conservation were measured in the diameter range of 5-40 nm using sucrose nanoparticles. Chargers were operated under various flow conditions in the range of 0.6-5.0 liters per minute. For particular experimental conditions, some deviations from the chosen theoretical model were found for all chargers. For very small particle sizes, the AC-corona charger showed particle losses at low flow rates and did not reach steady-state charge equilibrium at high flow rates. However, for all chargers, operating conditions were identified where the bipolar charge equilibrium was achieved. Practically, excellent particle size conservation was found for all three chargers.

Lubrication with sputtered MoS2 films: Principles, operation, limitations

NASA Technical Reports Server (NTRS)

Spalvins, T.

1991-01-01

The present practices, limitations, and understanding of thin sputtered MoS2 films are reviewed. Sputtered MoS2 films can exhibit remarkable tribological properties such as ultralow friction coefficients (0.01) and enhanced wear lives (millions of cycles) when used in vacuum or dry air. To achieve these favorable tribological characteristics, the sputtering conditions during deposition must be optimized for adequate film adherence and appropriate structure (morphology) and composition.

[Development and application of practical synthetic methods of imidazolines].

PubMed

Murai, Kenichi

2010-08-01

This review describes the first method to prepare imidazolines from aldehydes and 1,2-diamines by condensation and successive oxidation using NBS in one-pot operation. The reaction proceeds under mild conditions and can be applied to various aromatic and aliphatic aldehydes and 1,2-diamines. The utility of this method is also demonstrated in the total synthesis of spongotine A and the preparation of a newly designed organocatalyst, C3-symmetric trisimidazoline 7.

Software Quality Assurance and the Fleet Material Support Environment.

DTIC Science & Technology

1982-06-01

is one of utility; each factor identified could be applied to :t production environment. The interaction of support groups within an operational...ship-support functio2s. It is comprised of aoproxi- mately 250 people and is i furctionally oriented department. The Financial Sistems Desian and...that t h-, following specific conditions ?xist: 1. Poorly Defined Regu-rements/Speci-fica:-4ons a) FM1SO design procedures/practices tend to be appli

Precision Minds: An Investigation Into the use of Information in Operational-Level Decision Making and Learning

DTIC Science & Technology

2005-06-17

Procedures and Techniques. (California: Thousand Oaks 1998),11. 14 Alan Bryman Quantity and Quality in Social Research . (London: Unwin, 1988), 8. 48... Bryman , Alan. Quantity and Quality in Social Research . London: Unwin, 1988. Clark, Wesley. Winning Modern Wars: Iraq, Terrorism, and the American...a global audience than ever before. Under such conditions the practical business of defeating the enemy militarily in such a way as to deliver

Biofeedback and Self-Regulation in Essential Hypertension.

DTIC Science & Technology

1977-09-20

SI n.c... ~ y aid ld.ruity by Mock numb.,) Biofeedback Operant condition ing Behav i oral factors in hypertension Re l axa ti on Meditation • 20...preliminary findings of a clini- cal study in which two types of biofeedback training were compared to a form of meditation in the treatment of borderline...behav ioral methods not involving the use of complex feedback techniques include progressive relaxation, medita- tion, yogic practices, autogenic

Evaluation of Iron Loss in Interior Permanent Magnet Synchronous Motor with Consideration of Rotational Field

NASA Astrophysics Data System (ADS)

Ma, Lei; Sanada, Masayuki; Morimoto, Shigeo; Takeda, Yoji; Kaido, Chikara; Wakisaka, Takeaki

Loss evaluation is an important issue in the design of electrical machines. Due to the complicate structure and flux distribution, it is difficult to predict the iron loss in the machines exactly. This paper studies the iron loss in interior permanent magnet synchronous motors based on the finite element method. The iron loss test data of core material are used in the fitting of the hysteresis and eddy current loss constants. For motors in practical operation, additional iron losses due to the appearance of rotation of flux density vector and harmonic flux density distribution makes the calculation data deviates from the measured ones. Revision is made to account for these excess iron losses which exist in the practical operating condition. Calculation results show good consistence with the experimental ones. The proposed method provides a possible way to predict the iron loss of the electrical machine with good precision, and may be helpful in the selection of the core material which is best suitable for a certain machine.

Magnetic resonance imaging after anterior cruciate ligament reconstruction: A practical guide

PubMed Central

Grassi, Alberto; Bailey, James R; Signorelli, Cecilia; Carbone, Giuseppe; Tchonang Wakam, Andy; Lucidi, Gian Andrea; Zaffagnini, Stefano

2016-01-01

Anterior cruciate ligament (ACL) reconstruction is one of the most common orthopedic procedures performed worldwide. In this regard, magnetic resonance imaging (MRI) represents a useful pre-operative tool to confirm a disruption of the ACL and to assess for potential associated injuries. However, MRI is also valuable post-operatively, as it is able to identify, in a non-invasive way, a number of aspects and situations that could suggest potential problems to clinicians. Graft signal and integrity, correct tunnel placement, tunnel widening, and problems with fixation devices or the donor site could all compromise the surgical outcomes and potentially predict the failure of the ACL reconstruction. Furthermore, several anatomical features of the knee could be associated to worst outcomes or higher risk of failure. This review provides a practical guide for the clinician to evaluate the post-surgical ACL through MRI, and to analyze all the parameters and features directly or indirectly related to ACL reconstruction, in order to assess for normal or pathologic conditions. PMID:27795945

Variations in thematic mapper spectra of soil related to tillage and crop residue management - Initial evaluation

NASA Technical Reports Server (NTRS)

Seeley, M. W.; Ruschy, D. L.; Linden, D. R.

1983-01-01

A cooperative research project was initiated in 1982 to study differences in thematic mapper spectral characteristics caused by variable tillage and crop residue practices. Initial evaluations of radiometric data suggest that spectral separability of variably tilled soils can be confounded by moisture and weathering effects. Separability of bare tilled soils from those with significant amounts of corn residue is enhanced by wet conditions, but still possible under dry conditions when recent tillage operations have occurred. In addition, thematic mapper data may provide an alternative method to study the radiant energy balance at the soil surface in conjunction with variable tillage systems.

Best Practices for Operations of Satellite Constellations

NASA Technical Reports Server (NTRS)

Howard, Joseph; Oza, Dipak; Smith, Danford S.

2006-01-01

This paper presents the best practices used by several commercial and government operators of satellite constellations. These best practices were identified through a series of seminars and discussions held at NASA Goddard Space Flight Center (GSFC). The best practices are arrived through many years of experience and improvements made in the operations procedures and the operational systems with the primary drivers as mission safety and cost effectiveness. This paper discusses the operational aspects associated with how different organizations manage complexities of constellation operations. For the purposes of this paper, satellite constellations are groups of similar spacecraft with more than one spacecraft needed to fully accomplish the constellation's mission

Real-time simulator for helicopter rotor wind-tunnel operations

NASA Technical Reports Server (NTRS)

Talbot, P. D.; Peterson, R. L.; Graham, D. R.

1986-01-01

This paper describes the elements and operation of a simulator that is being used to train operators of the Rotor Test Apparatus (RTA) in the large-scale 40- by 80-Foot Wind Tunnel at Ames Research Center. The simulator, named TUTOR (for Tunnel Utilization Trainer with Operating Rotor) duplicates the controls of the rotor and its dynamic behavior, as well as the wind-tunnel controls. The simulation software uses a preexisting blade-element model of a four-bladed rotor with flapping and lead-lag degrees of freedom. Equations were developed for all hardware and controls of the RTA and of the wind tunnel that are normally required to perform a wind-tunnel test of a helicopter rotor. The simulator hardware consists of consoles designed to have the same appearance and functions as those in the control room of the 40- by 80-Foot Wind Tunnel, allowing input from three operators who normally establish the required operating conditions during a test run. Normal operating procedures can be practiced, as well as simulated emergencies such as rotor power failure.

Specialization and the Current Practices of General Surgeons

PubMed Central

Decker, Marquita R; Dodgion, Christopher M; Kwok, Alvin C; Hu, Yue-Yung; Havlena, Jeff A; Jiang, Wei; Lipsitz, Stuart R; Kent, K Craig; Greenberg, Caprice C

2014-01-01

Background The impact of specialization on the practice of general surgery has not been characterized. Our goal was to assess general surgeons’ operative practices to inform surgical education and workforce planning. Study Design We examined the practices of general surgeons identified in the 2008 State Inpatient and Ambulatory Surgery Databases of the Healthcare Cost and Utilization Project (HCUP) for three US states. Operations were identified using ICD-9 and CPT codes linked to encrypted physician identifiers. For each surgeon, total operative volume and the percentage of practice comprised of their most common operation were calculated. Correlation was measured between general surgeons’ case volume and the number of other specialists in a health service area. Results There were 1,075 general surgeons who performed 240,510 operations in 2008. The mean operative volume for each surgeon was 224 annual procedures. General surgeons performed an average of 23 different types of operations. For the majority of general surgeons, their most common procedure comprised no more than 30% of total practice. The most common operations, ranked by the frequency that they appeared as general surgeons’ top procedure, included: cholecystectomy, colonoscopy, endoscopy, and skin excision. The proportion of general surgery practice comprised of endoscopic procedures inversely correlated with the number of gastroenterologists in the health service area (Rho = - 0.50, p = 0.005). Conclusions Despite trends toward specialization, the current practices of general surgeons remain heterogeneous. This indicates a continued demand for broad-based surgical education to allow future surgeons to tailor their practices to their environment. PMID:24210145

A second and more promising round of E-health enterprises.

PubMed

Fifer, Sheila K; Thomas, Norrie

2002-11-01

After several years of false starts and failed enterprises, E-medicine is starting to generate practical applications in health care. The new generation of E-businesses is benefiting from the dot-com bust, which has driven away expectations of high financial returns from enterprises based on overblown, ill-fitting models taken from non-health care industries. The more successful new models are adapted to hospital operations and practice patterns, and are backed by money and management indigenous to medicine. However, they are also fragmented, in thus far unconnected pieces of E-network services for discrete clinical activities, such as scripting, lab-testing, patient monitoring, and condition-specific diagnostics and treatment. The new question about E-medicine practice may be not "When will it happen?" but "when will the fragmented E-health systems be connected?"

Practical internal combustion engine laser spark plug development

NASA Astrophysics Data System (ADS)

Myers, Michael J.; Myers, John D.; Guo, Baoping; Yang, Chengxin; Hardy, Christopher R.

2007-09-01

Fundamental studies on laser ignition have been performed by the US Department of Energy under ARES (Advanced Reciprocating Engines Systems) and by the California Energy Commission under ARICE (Advanced Reciprocating Internal Combustion Engine). These and other works have reported considerable increases in fuel efficiencies along with substantial reductions in green-house gas emissions when employing laser spark ignition. Practical commercial applications of this technology require low cost high peak power lasers. The lasers must be small, rugged and able to provide stable laser beam output operation under adverse mechanical and environmental conditions. New DPSS (Diode Pumped Solid State) lasers appear to meet these requirements. In this work we provide an evaluation of HESP (High Efficiency Side Pumped) DPSS laser design and performance with regard to its application as a practical laser spark plug for use in internal combustion engines.

Complications of Bariatric Surgery: What You Can Expect to See in Your GI Practice.

PubMed

Schulman, Allison R; Thompson, Christopher C

2017-11-01

Obesity is one of the most significant health problems worldwide. Bariatric surgery has become one of the fastest growing operative procedures and has gained acceptance as the leading option for weight-loss. Despite improvement in the performance of bariatric surgical procedures, complications are not uncommon. There are a number of unique complications that arise in this patient population and require specific knowledge for proper management. Furthermore, conditions unrelated to the altered anatomy typically require a different management strategy. As such, a basic understanding of surgical anatomy, potential complications, and endoscopic tools and techniques for optimal management is essential for the practicing gastroenterologist. Gastroenterologists should be familiar with these procedures and complication management strategies. This review will cover these topics and focus on major complications that gastroenterologists will be most likely to see in their practice.

Thyroid Disease and Surgery in CHEER: The Nation’s Otolaryngology-Head and Neck Surgery Practice Based Network

PubMed Central

Parham, Kourosh; Chapurin, Nikita; Schulz, Kris; Shin, Jennifer J.; Pynnonen, Melissa A.; Witsell, David L.; Langman, Alan; Nguyen-Huynh, Anh; Ryan, Sheila E.; Vambutas, Andrea; Wolfley, Anne; Roberts, Rhonda; Lee, Walter T.

2017-01-01

Objectives 1) Describe thyroid-related diagnoses and procedures in CHEER across academic and community sites. 2) Compare management of malignant thyroid disease across these sites, and 3) Provide practice based data related to flexible laryngoscopy vocal fold assessment before and after thyroid surgery based on AAO-HNSF Clinical Practice Guidelines. Study Design Review of retrospective data collection (RDC) database of the CHEER network using ICD-9 and CPT codes related to thyroid conditions. Setting Multisite practice based network. Subjects and Methods There were 3,807 thyroid patients (1,392 malignant; 2,415 benign) with 10,160 unique visits identified from 1 year of patient data in the RDC. Analysis was performed for identified cohort of patients using demographics, site characteristics and diagnostic and procedural distribution. Results Mean number of patients with thyroid disease per site was 238 (range 23–715). In community practices, 19% of patients with thyroid disease had cancer versus 45% in the academic setting (p<0.001). While academic sites manage more cancer patients, community sites are also surgically treating thyroid cancer, and performed more procedures per cancer patient (4.2 vs. 3.5, p<0.001). Vocal fold function was assessed by flexible laryngoscopy in 34.0% of pre-operative patients and in 3.7% post-operatively. Conclusion This is the first overview of malignant and benign thyroid disease through CHEER. It shows how the RDC can be used alone and with national guidelines to inform of clinical practice patterns in academic and community sites. This demonstrates the potential for future thyroid related studies utilizing the Otolaryngology-H&N Surgery’s practice-based research network. PMID:27371622

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This study compared conditions, practices, and attitudes at underground bituminous coal mines having low injury incidence rates with those found at mines having high injury incidence rates. Several characteristics common to many of the low incidence rate mines that differentiate them from those having high incidence rates were identified. (1) Training programs: adequate and relevant training materials; qualified instructors; restricted classroom size to encourage student participation; and tailored to meet individual miner needs. (2) Management/labor relations tend to have a positive impact upon a mine's accident and injury experience when: both management and labor have a positive attitude toward safetymore » and health; open lines of communication permit management and labor to jointly reconcile problems affecting safety and health; representatives of labor become actively involved in issues concerning safety, health and production; and management and labor identify and accept their joint responsibility for correcting unsafe conditions and practices. (3) Safety and health conditions are improved when: standard operating procedures are established, understood, and implemented; management equitably enforces established policies concerning absenteeism, job assignments, and standard operating procedures; formal safety and health programs are communicated to all employees and subsequently implemented by management and labor; safety department has top management support in terms of funds, manpower, and the authority necessary to implement the safety and health program; mine plans are thoroughly reviewed by management, labor, and MSHA to insure that such plans incorporate measures to adequately control the physical environment of a coal mine; and MSHA inspection activity is most effective when the inspectors encourage increased cooperative interaction between themselves, mine management, and labor.« less

Physiotherapy in upper abdominal surgery - what is current practice in Australia?

PubMed

Patman, Shane; Bartley, Alice; Ferraz, Allex; Bunting, Cath

2017-01-01

Upper abdominal surgery (UAS) has the potential to cause post-operative pulmonary complications (PPCs). In the absence of high-quality research regarding post-operative physiotherapy management, consensus-based best practice guidelines formulated by Hanekom et al. (2012) are available to clinicians providing recommendations for post-UAS treatment. Such best practice guidelines have recommended that physiotherapists should be using early mobilisation and respiratory intervention to minimise risk of PPCs. However, recent evidence supports the implementation of mobilisation as a standalone treatment in PPC prevention, though the diversity in literature poses questions regarding ideal current practice. This project aimed to document and report the assessment measures and interventions physiotherapists are utilising following UAS, establishing whether current management is reflective of best practice guidelines and recent evidence. An online survey was completed by 57 experienced Australian physiotherapists working with patients following UAS (35% survey response rate, 63% completion rate). On day one following UAS, when a patient's condition is not medically limited, most physiotherapists routinely mobilise. Additionally, routine chest treatment continues to be implemented, with only 23% ( n  = 11/47) of physiotherapists mobilising patients without accompanying specific respiratory intervention. Variability of screening tools used to identify post-operative patients at high risk of PPC development was evident. Patient-dependent factors such as 'fatigue' and 'non-compliance' were among those identified as barriers to treatment, all influencing the commencement of treatment. Physiotherapists indicated that early mobilisation away from the bedside was the preferred post-operative treatment within the UAS patient population. Many continue to perform routine respiratory interventions despite recent literature suggesting it may provide no additional benefit to preventing PPCs. Current intervention choice is reflective of guidelines [1], however, recent literature has called this into question and more research needs to be done to establish if these recommendations are the most effective at reducing PPCs. Continued research is necessary to promote translation of knowledge to ensure physiotherapists are mobilising patients day one post-UAS. Likewise, future work should focus on identification of barriers, the strategies used to overcome limitations and the creation of a reliable and validated screening tool to ensure appropriate prioritisation and allocation of physiotherapy resources within the UAS patient population.

From skin biopsy to neurons through a pluripotent intermediate under Good Manufacturing Practice protocols.

PubMed

Karumbayaram, Saravanan; Lee, Peiyee; Azghadi, Soheila F; Cooper, Aaron R; Patterson, Michaela; Kohn, Donald B; Pyle, April; Clark, Amander; Byrne, James; Zack, Jerome A; Plath, Kathrin; Lowry, William E

2012-01-01

The clinical application of human-induced pluripotent stem cells (hiPSCs) requires not only the production of Good Manufacturing Practice-grade (GMP-grade) hiPSCs but also the derivation of specified cell types for transplantation under GMP conditions. Previous reports have suggested that hiPSCs can be produced in the absence of animal-derived reagents (xenobiotics) to ease the transition to production under GMP standards. However, to facilitate the use of hiPSCs in cell-based therapeutics, their progeny should be produced not only in the absence of xenobiotics but also under GMP conditions requiring extensive standardization of protocols, documentation, and reproducibility of methods and product. Here, we present a successful framework to produce GMP-grade derivatives of hiPSCs that are free of xenobiotic exposure from the collection of patient fibroblasts, through reprogramming, maintenance of hiPSCs, identification of reprogramming vector integration sites (nrLAM-PCR), and finally specification and terminal differentiation of clinically relevant cells. Furthermore, we developed a primary set of Standard Operating Procedures for the GMP-grade derivation and differentiation of these cells as a resource to facilitate widespread adoption of these practices.

Methodologies for processing plant material into acceptable food on a small scale

NASA Technical Reports Server (NTRS)

Parks, Thomas R.; Bindon, John N.; Bowles, Anthony J. G.; Golbitz, Peter; Lampi, Rauno A.; Marquardt, Robert F.

1994-01-01

Based on the Controlled Environment Life Support System (CELSS) production of only four crops, wheat, white potatoes, soybeans, and sweet potatoes; a crew size of twelve; a daily planting/harvesting regimen; and zero-gravity conditions, estimates were made on the quantity of food that would need to be grown to provide adequate nutrition; and the corresponding amount of biomass that would result. Projections were made of the various types of products that could be made from these crops, the unit operations that would be involved, and what menu capability these products could provide. Equipment requirements to perform these unit operations were screened to identify commercially available units capable of operating (or being modified to operate) under CELSS/zero-gravity conditions. Concept designs were developed for those equipment needs for which no suitable units were commercially available. Prototypes of selected concept designs were constructed and tested on a laboratory scale, as were selected commercially available units. This report discusses the practical considerations taken into account in the various design alternatives, some of the many product/process factors that relate to equipment development, and automation alternatives. Recommendations are made on both general and specific areas in which it was felt additional investigation would benefit CELSS missions.

Oxygen Handling and Cooling Options in High Temperature Electrolysis Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manohar S. Sohal; J. Stephen Herring

2008-07-01

Idaho National Laboratory is working on a project to generate hydrogen by high temperature electrolysis (HTE). In such an HTE system, safety precautions need to be taken to handle high temperature oxygen at ~830°C. This report is aimed at addressing oxygen handling in a HTE plant.. Though oxygen itself is not flammable, most engineering material, including many gases and liquids, will burn in the presence of oxygen under some favorable physicochemical conditions. At present, an absolute set of rules does not exist that can cover all aspects of oxygen system design, material selection, and operating practices to avoid subtle hazardsmore » related to oxygen. Because most materials, including metals, will burn in an oxygen-enriched environment, hazards are always present when using oxygen. Most materials will ignite in an oxygen-enriched environment at a temperature lower than that in air, and once ignited, combustion rates are greater in the oxygen-enriched environment. Even many metals, if ignited, burn violently in an oxygen-enriched environment. However, these hazards do not preclude the operations and systems involving oxygen. Oxygen can be safely handled and used if all the materials in a system are not flammable in the end-use environment or if ignition sources are identified and controlled. In fact, the incidence of oxygen system fires is reported to be low with a probability of about one in a million. This report is a practical guideline and tutorial for the safe operation and handling of gaseous oxygen in high temperature electrolysis system. The intent is to provide safe, practical guidance that permits the accomplishment of experimental operations at INL, while being restrictive enough to prevent personnel endangerment and to provide reasonable facility protection. Adequate guidelines are provided to govern various aspects of oxygen handling associated with high temperature electrolysis system to generate hydrogen. The intent here is to present acceptable oxygen standards and practices for minimum safety requirements. A summary of operational hazards, along with oxygen safety and emergency procedures, are provided.« less

Specialization and the current practices of general surgeons.

PubMed

Decker, Marquita R; Dodgion, Christopher M; Kwok, Alvin C; Hu, Yue-Yung; Havlena, Jeff A; Jiang, Wei; Lipsitz, Stuart R; Kent, K Craig; Greenberg, Caprice C

2014-01-01

The impact of specialization on the practice of general surgery has not been characterized. Our goal was to assess general surgeons' operative practices to inform surgical education and workforce planning. We examined the practices of general surgeons identified in the 2008 State Inpatient and Ambulatory Surgery Databases of the Healthcare Cost and Utilization Project for 3 US states. Operations were identified using ICD-9 and CPT codes linked to encrypted physician identifiers. For each surgeon, total operative volume and percentage of practice that made up their most common operation were calculated. Correlation was measured between general surgeons' case volume and the number of other specialists in a health service area. There were 1,075 general surgeons who performed 240,510 operations in 2008. The mean operative volume for each surgeon was 224 annual procedures. General surgeons performed an average of 23 different types of operations. For the majority of general surgeons, their most common procedure constituted no more than 30% of total practice. The most common operations, ranked by the frequency they appeared as general surgeons' top procedure, included cholecystectomy, colonoscopy, endoscopy, and skin excision. The proportion of general surgery practice composed of endoscopic procedures inversely correlated with the number of gastroenterologists in the health service area (rho = -0.50; p = 0.005). Despite trends toward specialization, the current practices of general surgeons remain heterogeneous. This indicates a continued demand for broad-based surgical education to allow future surgeons to tailor their practices to their environment. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Evaluation and Management of Traumatic Diaphragmatic Injuries: A Practice Management Guideline from the Eastern Association for the Surgery of Trauma.

PubMed

McDonald, Amy A; Robinson, Bryce R H; Alarcon, Louis; Bosarge, Patrick L; Dorion, Heath; Haut, Elliott R; Juern, Jeremy; Madbak, Firas; Reddy, Srinivas; Weiss, Patricia; Como, John J

2018-04-02

Traumatic diaphragm injuries (TDI) pose both diagnostic and therapeutic challenges in both the acute and chronic phases. There are no published practice management guidelines to date for TDI. We aim to formulate a practice management guideline for TDI using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) methodology. The working group formulated five Patient, Intervention, Comparator, Outcome (PICO) questions regarding the following topics: 1) diagnostic approach (laparoscopy vs. computed tomography); 2) non-operative management of penetrating right-sided injuries; 3) surgical approach (abdominal or thoracic) for acute TDI, including 4) the use of laparoscopy; and 5) surgical approach (abdominal or thoracic) for delayed TDI. A systematic review was undertaken and last updated December 2016. RevMan 5 (Cochran Collaboration) and GRADEpro (Grade Working Group) software were utilized. Recommendations were voted on by working group members. Consensus was obtained for each recommendation. A total of 56 articles were utilized to formulate the recommendations. Most studies were retrospective case series with variable reporting of outcomes measures and outcomes frequently not stratified to intervention or comparator. The overall quality of the evidence was very low for all PICOs. Therefore, only conditional recommendations could be made. Recommendations were made in favor of laparoscopy over CT for diagnosis, non-operative vs. operative approach for right-sided penetrating injuries, abdominal vs. thoracic approach for acute TDI, and laparoscopy (with the appropriate skill set and resources) vs. open approach for isolated TDI. No recommendation could be made for the preferred operative approach for delayed TDI. Very low-quality evidence precluded any strong recommendations. Further study of the diagnostic and therapeutic approaches to TDI is warranted. Guideline LEVEL OF EVIDENCE: 4.

Jet aircraft emissions during cruise: Present and future

NASA Technical Reports Server (NTRS)

Grobman, J. S.

1975-01-01

Forecasts of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are compared to cruise emission for present day aircraft. The forecasts are based on: (1) knowledge of emission characteristics of combustors and augmentors; (2) combustion research in emission reduction technology, and (3) trends in projected engine designs for advanced subsonic or supersonic commercial aircraft. Recent progress that was made in the evolution of emissions reduction technology is discussed.

[Design of a miniaturized blood temperature-varying system based on computer distributed control].

PubMed

Xu, Qiang; Zhou, Zhaoying; Peng, Jiegang; Zhu, Junhua

2007-10-01

Blood temperature-varying has been widely applied in clinical practice such as extracorporeal circulation for whole-body perfusion hyperthermia (WBPH), body rewarming and blood temperature-varying in organ transplantation. This paper reports a novel DCS (Computer distributed control)-based blood temperature-varying system which includes therapy management function and whose hardware and software can be extended easily. Simulation results illustrate that this system provides precise temperature control with good performance in various operation conditions.

The Cost Effectiveness of Flame Sprayed Coatings for Shipboard Corrosion Control

DTIC Science & Technology

1990-06-01

the substrate. 2. Existing condition of the surface to be painted. 3. Type of exposure. 4. Past history of the surface to be presened. 5. Practical... Psychrometer (B) Holiday Detector (Portable) (P) Wet Film Thickness Gauge (p) Dry Film Thickness Gauge (P) Air Compressor and Dryer (P) Battery Operated...34, typical. 3. Utility Requirements None 4. Estimated Cost $140 61 Y. 1. 2. 3. 4. PORTABLE ELECTRIC PSYCHROMETER Intended Use (B) To measure relative

Wind Turbine Gearbox Oil Filtration and Condition Monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

This is an invited presentation for a pre-conference workshop, titled advances and opportunities in lubrication: wind turbine, at the 2015 Society of Tribologists and Lubrication Engineers (STLE) Tribology Frontiers Conference held in Denver, CO. It gives a brief overview of wind turbine gearbox oil filtration and condition monitoring by highlighting typical industry practices and challenges. The presentation starts with an introduction by covering recent growth of global wind industry, reliability challenges, benefits of oil filtration and condition monitoring, and financial incentives to conduct wind operation and maintenance research, which includes gearbox oil filtration and condition monitoring work presented herein. Then,more » the presentation moves on to oil filtration by stressing the benefits of filtration, discussing typical main- and offline-loop practices, highlighting important factors considered when specifying a filtration system, and illustrating real-world application challenges through a cold-start example. In the next section on oil condition monitoring, a discussion on oil sample analysis, oil debris monitoring, oil cleanliness measurements and filter analysis is given based on testing results mostly obtained by and at NREL, and by pointing out a few challenges with oil sample analysis. The presentation concludes with a brief touch on future research and development (R and D) opportunities. It is hoping that the information presented can inform the STLE community to start or redirect their R and D work to help the wind industry advance.« less

Bringing High-Rate, CO2-Based Microbial Electrosynthesis Closer to Practical Implementation through Improved Electrode Design and Operating Conditions.

PubMed

Jourdin, Ludovic; Freguia, Stefano; Flexer, Victoria; Keller, Jurg

2016-02-16

The enhancement of microbial electrosynthesis (MES) of acetate from CO2 to performance levels that could potentially support practical implementations of the technology must go through the optimization of key design and operating conditions. We report that higher proton availability drastically increases the acetate production rate, with pH 5.2 found to be optimal, which will likely suppress methanogenic activity without inhibitor addition. Applied cathode potential as low as -1.1 V versus SHE still achieved 99% of electron recovery in the form of acetate at a current density of around -200 A m(-2). These current densities are leading to an exceptional acetate production rate of up to 1330 g m(-2) day(-1) at pH 6.7. Using highly open macroporous reticulated vitreous carbon electrodes with macropore sizes of about 0.6 mm in diameter was found to be optimal for achieving a good balance between total surface area available for biofilm formation and effective mass transfer between the bulk liquid and the electrode and biofilm surface. Furthermore, we also successfully demonstrated the use of a synthetic biogas mixture as carbon dioxide source, yielding similarly high MES performance as pure CO2. This would allow this process to be used effectively for both biogas quality improvement and conversion of the available CO2 to acetate.

Dormancy and Recovery Testing for Biological Wastewater Processors

NASA Technical Reports Server (NTRS)

Hummerick, Mary E.; Coutts, Janelle L.; Lunn, Griffin M.; Spencer, LaShelle; Khodadad, Christina L.; Birmele, Michele N.; Frances, Someliz; Wheeler, Raymond

2015-01-01

Bioreactors, such as the aerated hollow fiber membrane type, have been proposed and studied for a number of years as an alternate approach for treating wastewater streams for space exploration. Several challenges remain to be resolved before these types of bioreactors can be used in space settings, including transporting the bioreactors with intact and active biofilms, whether that be to the International Space Station or beyond, or procedures for safing the systems and placing them into a dormant state for later start-up. Little information is available on such operations as it is not common practice for terrestrial systems. This study explored several dormancy processes for established bioreactors to determine optimal storage and recovery conditions. Procedures focused on complete isolation of the microbial communities from an operational standpoint and observing the effects of: 1) storage temperature, and 2) storage with or without the reactor bulk fluid. The first consideration was tested from a microbial integrity and power consumption standpoint; both ambient temperature (25 C) and cold (4 C) storage conditions were studied. The second consideration was explored; again, for microbial integrity as well as plausible real-world scenarios of how terrestrially established bioreactors would be transported to microgravity and stored for periods of time between operations. Biofilms were stored without the reactor bulk fluid to simulate transport of established biofilms into microgravity, while biofilms stored with the reactor bulk fluid simulated the most simplistic storage condition to implement operations for extended periods of nonuse. Dormancy condition did not have an influence on recovery in initial studies with immature biofilms (48 days old), however a lengthy recovery time was required (20+ days). Bioreactors with fully established biofilms (13 months) were able to recover from a 7-month dormancy period to steady state operation within 4 days (approx. 1 residence cycle). Results indicate a need for future testing on biofilm age and health and further exploration of dormancy length.

Dormancy and Recovery Testing for Biological Wastewater Processors

NASA Technical Reports Server (NTRS)

Hummerick, Mary E.; Coutts, Janelle L.; Lunn, Griffin M.; Spencer, LaShelle; Khodadad, Christina L.; Frances, Someliz; Wheller, Raymond

2015-01-01

Bioreactors, such as aerated membrane type bioreactors have been proposed and studied for a number of years as an alternate approach for treating wastewater streams for space exploration. Several challenges remain before these types of bioreactors can be used in space settings, including transporting the bioreactors with their microbial communities to space, whether that be the International Space Station or beyond, or procedures for safing the systems and placing them into dormant state for later start-up. Little information is available on such operations as it is not common practice for terrestrial systems. This study explored several dormancy processes for established bioreactors to determine optimal storage and recovery conditions. Procedures focused on complete isolation of the microbial communities from an operational standpoint and observing the effects of: 1) storage temperature, and 2) storage with or without the reactor bulk fluid. The first consideration was tested from a microbial integrity and power consumption standpoint; both room temperature (25 C) and cold (4 C) storage conditions were studied. The second consideration was explored; again, for microbial integrity as well as plausible real-world scenarios of how terrestrially established bioreactors would be transported to microgravity and stored for periods of time between operations. Biofilms were stored without the reactor bulk fluid to simulate transport of established biofilms into microgravity, while biofilms stored with the reactor bulk fluid simulated the most simplistic storage condition to implement operations for extended periods of nonuse. Dormancy condition did not have an influence on recovery in initial studies with immature biofilms (48 days old), however, a lengthy recovery time was required (20+ days). Bioreactors with fully established biofilms (13 months) were able to recover from a 7-month dormancy period to steady state operation within 4 days (approximately 1 residence cycle). Results indicate a need for future testing on biofilm age and health and further exploration of dormancy length.

Linking nurses' perceptions of patient care quality to job satisfaction: the role of authentic leadership and empowering professional practice environments.

PubMed

Spence Laschinger, Heather K; Fida, Roberta

2015-05-01

A model linking authentic leadership, structural empowerment, and supportive professional practice environments to nurses' perceptions of patient care quality and job satisfaction was tested. Positive work environment characteristics are important for nurses' perceptions of patient care quality and job satisfaction (significant factors for retention). Few studies have examined the mechanism by which these characteristics operate to influence perceptions of patient care quality or job satisfaction. A cross-sectional provincial survey of 723 Canadian nurses was used to test the hypothesized models using structural equation modeling. The model was an acceptable fit and all paths were significant. Authentic leadership had a positive effect on structural empowerment, which had a positive effect on perceived support for professional practice and a negative effect on nurses' perceptions that inadequate unit staffing prevented them from providing high-quality patient care. These workplace conditions predicted job satisfaction. Authentic leaders play an important role in creating empowering professional practice environments that foster high-quality care and job satisfaction.

Factors influencing the QMF resolution for operation in stability zones 1 and 3.

PubMed

Syed, Sarfaraz U A H; Hogan, Thomas; Gibson, John; Taylor, Stephen

2012-05-01

This study uses a computer model to simulate a quadrupole mass filter (QMF) instrument under different operating conditions for Mathieu stability zones 1 and 3. The investigation considers the factors that limit the maximum resolution (R(max)), which can be obtained for a given QMF for a particular value of scan line. Previously, QMF resolution (R) has been found to be dependent on number (N) of radio frequency (rf) cycles experienced by the ions in the mass filter, according to R = N(n)/K, where n and K are the constants. However, this expression does not predict the limit to QMF resolution observed in practice and is true only for the linear regions of the performance curve for QMF operation in zone 1 and zone 3 of the stability diagram. Here we model the saturated regions of the performance curve for QMF operation in zone 1 according to R = q(1 - 2c(N))/∆q, where c is a constant and ∆q is the width of the intersection of the operating scan line with the stability zone 1, measured at q-axis of the Mathieu stability diagram. Also by careful calculations of the detail of the stability tip of zone 1, the following relationship was established between R(max) and percentage U/V ratio: R(max) = q/(0.9330-0.00933U/V). For QMF operation in zone 3 the expression R = a - bc(N) simulates well the linear and saturated regions of the performance curve for a range of operational conditions, where a, b, and c are constants.

A comparison of the environmental impact of different AOPs: risk indexes.

PubMed

Giménez, Jaime; Bayarri, Bernardí; González, Óscar; Malato, Sixto; Peral, José; Esplugas, Santiago

2014-12-31

Today, environmental impact associated with pollution treatment is a matter of great concern. A method is proposed for evaluating environmental risk associated with Advanced Oxidation Processes (AOPs) applied to wastewater treatment. The method is based on the type of pollution (wastewater, solids, air or soil) and on materials and energy consumption. An Environmental Risk Index (E), constructed from numerical criteria provided, is presented for environmental comparison of processes and/or operations. The Operation Environmental Risk Index (EOi) for each of the unit operations involved in the process and the Aspects Environmental Risk Index (EAj) for process conditions were also estimated. Relative indexes were calculated to evaluate the risk of each operation (E/NOP) or aspect (E/NAS) involved in the process, and the percentage of the maximum achievable for each operation and aspect was found. A practical application of the method is presented for two AOPs: photo-Fenton and heterogeneous photocatalysis with suspended TiO2 in Solarbox. The results report the environmental risks associated with each process, so that AOPs tested and the operations involved with them can be compared.

Engineered Hyporheic Zones as Novel Water Quality Best Management Practice: Flow and Contaminant Attenuation in Constructed Stream Experiments

NASA Astrophysics Data System (ADS)

Herzog, S.; McCray, J. E.; Higgins, C. P.

2015-12-01

The hyporheic zone is a hotspot for biogeochemical processing that can attenuate a variety of nonpoint source contaminants in streamwater. However, hyporheic zones in urban and agricultural streams are often degraded and poorly connected with surface water. In order to increase hyporheic exchange and improve water quality, we introduced engineered streambeds as a stormwater and restoration best management practice. Modifications to streambed hydraulic conductivity and reactivity are termed Biohydrochemical Enhancement structures for Streamwater Treatment (BEST). BEST are subsurface modules that utilize low- and high-permeability sediments to drive efficient hyporheic exchange, and reactive geomedia to increase reaction rates within the hyporheic zone. This work presents the first physical performance data of BEST modules at the pilot scale. BEST modules were installed in a constructed stream facility at the Colorado School of Mines in Golden, CO. This facility features two 15m artificial streams, which included an all sand control condition alongside the BEST test condition. Streams were continuously operated at a discharge of 1 L/s using recycled water. Time-lapse electrical resistivity surveys demonstrated that BEST modules provided substantially greater hyporheic exchange than the control condition. Water quality samples at the hyporheic and reach scales also revealed greater attenuation of nitrogen, coliforms, and select metals and trace organics by BEST modules relative to the control condition. These experimental results were also compared to previous numerical model simulations to evaluate model accuracy. Together, these results show that BEST may be an effective best management practice for improving streamwater quality in urban and agricultural settings.

Influence network linkages across implementation strategy conditions in a randomized controlled trial of two strategies for scaling up evidence-based practices in public youth-serving systems

PubMed Central

2013-01-01

Background Given the importance of influence networks in the implementation of evidence-based practices and interventions, it is unclear whether such networks continue to operate as sources of information and advice when they are segmented and disrupted by randomization to different implementation strategy conditions. The present study examines the linkages across implementation strategy conditions of social influence networks of leaders of youth-serving systems in 12 California counties participating in a randomized controlled trial of community development teams (CDTs) to scale up use of an evidence-based practice. Methods Semi-structured interviews were conducted with 38 directors, assistant directors, and program managers of county probation, mental health, and child welfare departments. A web-based survey collected additional quantitative data on information and advice networks of study participants. A mixed-methods approach to data analysis was used to create a sociometric data set (n = 176) to examine linkages between treatment and standard conditions. Results Of those network members who were affiliated with a county (n = 137), only 6 (4.4%) were directly connected to a member of the opposite implementation strategy condition; 19 (13.9%) were connected by two steps or fewer to a member of the opposite implementation strategy condition; 64 (46.7%) were connected by three or fewer steps to a member of the opposite implementation strategy condition. Most of the indirect steps between individuals who were in different implementation strategy conditions were connections involving a third non-county organizational entity that had an important role in the trial in keeping the implementation strategy conditions separate. When these entities were excluded, the CDT network exhibited fewer components and significantly higher betweenness centralization than did the standard condition network. Conclusion Although the integrity of the RCT in this instance was not compromised by study participant influence networks, RCT designs should consider how influence networks may extend beyond boundaries established by the randomization process in implementation studies. Trial registration NCT00880126 PMID:24229373

Impact of Crop Conversions on Runoff and Sediment Output in the Lower Mississippi River Basin

NASA Astrophysics Data System (ADS)

Momm, H.; Bingner, R. L.; Elkadiri, R.; Yaraser, L.; Porter, W.

2017-12-01

Farming management practices influence sediment and agrochemical loads exiting fields and entering downstream water bodies. These practices impact multiple physical processes responsible for sediment and nutrient detachment, transport, and deposition. Recent changes in farming practices in the Southern United States coincide with increased grain production, replacing traditional crops such as cotton with corn and soybeans. To grow these crops in the South, adapted crop management practices are needed (irrigation, fertilizer, etc.). In this study, the impact of grain crop adoption on hydrologic processes and non-point source pollutant production is quantified. A watershed located in the Big Sunflower River drainage basin (14,179 km2) - a part of the greater Lower Mississippi River basin - was selected due to its economic relevance, historical agricultural output, and depiction of recent farming management trends. Estimates of runoff and sediment loads were produced using the U.S. Department of Agriculture supported Annualized Agriculture Non-Point Source Pollution (AnnAGNPS) watershed pollution and management model. Existing physical conditions during a 16-year period (2000-2015) were characterized using 3,992 sub-catchments and 1,602 concentrated flow paths. Algorithms were developed to integrate continuous land use/land cover information, variable spatio-temporal irrigation practices, and crop output yield in order to generate a total of 2,922 unique management practices and corresponding soil-disturbing operations. A simulation representing existing conditions was contrasted with simulations depicting alternatives of management, irrigation practices, and temporal variations in crop yield. Quantification of anthropogenic impacts to water quality and water availability at a watershed scale supports the development of targeted pollution mitigation and custom conservation strategies.

Acoustic Conditioning System Development and Conditioning Experiments on Black Seabreams in the Xiangshan Bay Sea Ranch

NASA Astrophysics Data System (ADS)

Hu, Qingsong; Rahman, Hafiz Abd ur; Jiang, Yazhou; Zhang, Shouyu; Shentu, Jikang

2018-06-01

Attracting released hatchery-reared fish to designated areas during the growth process is vital to realize the objectives of sea ranching. Based on the bottom artificial reefs and surface kelp culture facilities in the Xiangshan Bay sea ranch, we proposed systematic techniques related to acoustic conditioning of the black seabream ( Sparus macrocephalus). Experiments conducted in 12 m × 10 m × 1.6 m ponds on Xixuan Island showed that black seabream was positively sensitive to 500-600 Hz periodic signals. Conditioned responses were apparent after 8 d. Two to three days were required for recovery of the memory of a conditioned response after a 20-day interval. According to the practical application requirements in the open sea, unattended acoustic conditioning equipment was developed. The ranching equipment was used in 12 m × 12 m × 2.5 m cages, and the behavior of black seabream juveniles was successfully guided after 7 days. Of the 16000 released fish, 82.5% of them were conditioned with a flexible grading net. To avoid inducing a stress response, the juveniles were released into the sea ranch in situ from the net cage. The acoustic conditioning equipments were moved into the open sea and the aggregation phenomenon of the released fish was observed when the sound was played. After 6 months of investigation and based on Sr+ marking, only one acoustically conditioned fish was found outside the 3.5-km2 sea ranch area, thereby reached the goal of guiding activity. The practical effect in the Xiangshan Bay sea ranch showed the validity of the acoustic conditioning system, which may contribute to improve the operation of the sea ranches in the East China Sea.

Assessing the health impact of transnational corporations: a case study on McDonald's Australia.

PubMed

Anaf, Julia; Baum, Frances E; Fisher, Matt; Harris, Elizabeth; Friel, Sharon

2017-02-06

The practices of transnational corporations affect population health through production methods, shaping social determinants of health, or influencing the regulatory structures governing their activities. There has been limited research on community exposures to TNC policies and practices. Our pilot research used McDonald's Australia to test methods for assessing the health impacts of one TNC within Australia. We adapted existing Health Impact Assessment methods to assess McDonald's activities. Data identifying potential impacts were sourced through document analysis, including McDonald's corporate literature; media analysis and semi-structured interviews. We commissioned a spatial and socioeconomic analysis of McDonald's restaurants in Australia through Geographic Information System technology. The data was mapped against a corporate health impact assessment framework which included McDonald's Australia's political and business practices; products and marketing; workforce, social, environmental and economic conditions; and consumers' health related behaviours. We identified both positive and detrimental aspects of McDonald's Australian operations across the scope of the CHIA framework. We found that McDonald's outlets were slightly more likely to be located in areas of lower socioeconomic status. McDonald's workplace conditions were found to be more favourable than those in many other countries which reflects compliance with Australian employment regulations. The breadth of findings revealed the need for governments to strengthen regulatory mechanisms that are conducive to health; the opportunity for McDonald's to augment their corporate social responsibility initiatives and bolster reputational endorsement; and civil society actors to inform their advocacy towards health and equity outcomes from TNC operations. Our study indicates that undertaking a corporate health impact assessment is possible, with the different methods revealing sufficient information to realise that strong regulatory frameworks are need to help to avoid or to mediate negative health impacts.

Design and implementation of adaptive PI control schemes for web tension control in roll-to-roll (R2R) manufacturing.

PubMed

Raul, Pramod R; Pagilla, Prabhakar R

2015-05-01

In this paper, two adaptive Proportional-Integral (PI) control schemes are designed and discussed for control of web tension in Roll-to-Roll (R2R) manufacturing systems. R2R systems are used to transport continuous materials (called webs) on rollers from the unwind roll to the rewind roll. Maintaining web tension at the desired value is critical to many R2R processes such as printing, coating, lamination, etc. Existing fixed gain PI tension control schemes currently used in industrial practice require extensive tuning and do not provide the desired performance for changing operating conditions and material properties. The first adaptive PI scheme utilizes the model reference approach where the controller gains are estimated based on matching of the actual closed-loop tension control systems with an appropriately chosen reference model. The second adaptive PI scheme utilizes the indirect adaptive control approach together with relay feedback technique to automatically initialize the adaptive PI gains. These adaptive tension control schemes can be implemented on any R2R manufacturing system. The key features of the two adaptive schemes is that their designs are simple for practicing engineers, easy to implement in real-time, and automate the tuning process. Extensive experiments are conducted on a large experimental R2R machine which mimics many features of an industrial R2R machine. These experiments include trials with two different polymer webs and a variety of operating conditions. Implementation guidelines are provided for both adaptive schemes. Experimental results comparing the two adaptive schemes and a fixed gain PI tension control scheme used in industrial practice are provided and discussed. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

40 CFR 60.1200 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for my municipal waste combustion unit? 60.1200 Section 60.1200 Protection of Environment... SOURCES Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is... Good Combustion Practices: Operating Requirements § 60.1200 What are the operating practice...

Performance of the supercritical helium cooling loop for the JET divertor cryopump

DOE Office of Scientific and Technical Information (OSTI.GOV)

Obert, W.; Mayaux, C.; Barth, K.

1996-12-31

A supercritical helium cooling loop for the two JET divertor cryopumps has been tested, commissioned and is operational practically uninterrupted for over one year. Operation experience under a number of different boundary and transient conditions have been obtained. The flow of the supercritical helium (6 g/s, 2.7 bar) is driven by the main compressor of the JET helium refrigerator passing a heat exchanger where it is subcooled to 4.1 K before entering the two cryopumps which are an assembly of two 60 m long and 20 mm diameter corrugated stainless steel tubes. By using a dedicated cold ejector which ismore » driven by the main flow and where the expansion from 12 bar to 2.7 bar takes place increases the flow of supercritical helium up to {approximately}17 g/s. The steady state thermal load to the cooling loop of the cryopump is < 80 W but during transient conditions in particular due to nuclear heating in the active phase of JET considerably higher transient heat loads can be accepted by the loop. Details about the steady state and transient thermal conditions as well as the cooldown and warm up behavior of the loop and the interaction of the supercritical loop with the operation of other plant equipment will be discussed in the paper.« less

Best Management Practices to Prevent and Control Hydrogen ...

EPA Pesticide Factsheets

Hydrogen sulfide (H2S) gas can be emitted from both construction and demolition (C&D) debris and municipal solid waste (MSW) landfills. H2S emissions may be problematic at a landfill as they can cause odor, impact surrounding communities, cause wear or damage to landfill gas (LFG) collection and energy utilization components, or contribute to the formation of explosive conditions. H2S emissions at landfills have often been attributed to the disposal of gypsum drywall, though other sources such as sulfur-containing industrial wastes and biosolids from municipal wastewater treatment facilities can also contribute to H2S production. Addressing problems from H2S emissions at landfills can be costly and time consuming for landfill owners and operators. Several years of operational experience and research efforts have identified several key pieces of information regarding the conditions that can cause H2S production, factors that result in H2S production at landfills, and strategies to prevent these conditions from occurring and to minimize the release of H2S to the surrounding environment when it is produced. The U.S. Environmental Protection Agency (U.S. EPA) Office of Research and Development, in coordination with U.S. EPA Region 5, commissioned the development of a document designed to provide landfill owners and operators with guidance on pertinent subject matter associated with H2S production, emissions, prevention, and control at landfill sites. A previous

In-field measurements of PCDD/F emissions from domestic heating appliances for solid fuels.

PubMed

Hübner, C; Boos, R; Prey, T

2005-01-01

Within this project the emissions into the atmosphere of polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) of 30 domestic heating appliances in Austrian households were tested. The appliances were single stoves (kitchen stove, continuous burning stove and tiled stove) and central heating boilers for solid fuels up to a nominal heat input of 50 kW. A main objective of this survey was to determine the PCDD/F emissions of domestic heating units under routine conditions. Therefore, the habitual combustion conditions used by the operators were not influenced. The original fuels and lightning supports were used and the operation of the units was carried out by the householders according to their usual practice. The data obtained were used to calculate in-field PCDD/F-emission factors. Most of the appliances have shown PCDD/F emissions within a concentration range of 0.01-0.3 ng TEQ/MJ. Modern fan-assisted wood heating boilers with afterburning and units for continuously burning of wood chips and wood pellets had the lowest emissions. High emissions were caused by unsuitable heating habits such as combustion of wastes and inappropriate operation of the appliances. There were only small differences between single stoves and central heating boilers or between wood and coal-fired appliances. The emission factors calculated are higher than those cited in literature, which are mainly derived from trials on test stands under laboratory conditions.

Damage evaluation by a guided wave-hidden Markov model based method

NASA Astrophysics Data System (ADS)

Mei, Hanfei; Yuan, Shenfang; Qiu, Lei; Zhang, Jinjin

2016-02-01

Guided wave based structural health monitoring has shown great potential in aerospace applications. However, one of the key challenges of practical engineering applications is the accurate interpretation of the guided wave signals under time-varying environmental and operational conditions. This paper presents a guided wave-hidden Markov model based method to improve the damage evaluation reliability of real aircraft structures under time-varying conditions. In the proposed approach, an HMM based unweighted moving average trend estimation method, which can capture the trend of damage propagation from the posterior probability obtained by HMM modeling is used to achieve a probabilistic evaluation of the structural damage. To validate the developed method, experiments are performed on a hole-edge crack specimen under fatigue loading condition and a real aircraft wing spar under changing structural boundary conditions. Experimental results show the advantage of the proposed method.

Creep-Fatigue Failure Diagnosis

PubMed Central

Holdsworth, Stuart

2015-01-01

Failure diagnosis invariably involves consideration of both associated material condition and the results of a mechanical analysis of prior operating history. This Review focuses on these aspects with particular reference to creep-fatigue failure diagnosis. Creep-fatigue cracking can be due to a spectrum of loading conditions ranging from pure cyclic to mainly steady loading with infrequent off-load transients. These require a range of mechanical analysis approaches, a number of which are reviewed. The microstructural information revealing material condition can vary with alloy class. In practice, the detail of the consequent cracking mechanism(s) can be camouflaged by oxidation at high temperatures, although the presence of oxide on fracture surfaces can be used to date events leading to failure. Routine laboratory specimen post-test examination is strongly recommended to characterise the detail of deformation and damage accumulation under known and well-controlled loading conditions to improve the effectiveness and efficiency of failure diagnosis. PMID:28793676

Effect of Solution Annealing on Susceptibility to Intercrystalline Corrosion of Stainless Steel with 20% Cr and 8% Ni

NASA Astrophysics Data System (ADS)

Taiwade, R. V.; Patil, A. P.; Patre, S. J.; Dayal, R. K.

2013-06-01

In general, as-received (AR) austenitic stainless steels (ASSs) contain complex carbide precipitates due to manufacturing operations, subsequent annealing treatment, or due to the fabrication processes such as welding. The presence of pre-existing carbides leads to cumulative sensitization and make the steel susceptible to intercrystalline corrosion (ICC)/intergranular corrosion (IGC) which causes premature failure during service. Solution annealing (SA) is one of the ways to deal with such situations. In this present investigation, the AR (hot rolled and mill annealed) chromium-nickel (Cr-Ni) ASS is compared with SA Cr-Ni ASS. The extent of ICC/IGC was evaluated qualitatively and quantitatively by various electrochemical tests including ASTM standard A-262 Practice A and Practice E, double loop electrochemical potentiokinetic reactivation and electrochemical impedance spectroscopy. The degree of sensitization for hot rolled mill annealed AR condition is found to be substantially higher (51.55%) than that of SA condition (26.9%) for thermally aged samples (at 700 °C). The chemical composition across the grain boundary was measured using electron probe micro-analyzer for both (AR and SA) conditions and confirms that the pre-sensitization effect was completely removed after SA treatment.

Advanced Pathway Guidance Evaluations on a Synthetic Vision Head-Up Display

NASA Technical Reports Server (NTRS)

Kramer, Lynda J.; Prinzel, Lawrence J., III; Arthur, Jarvis J., III; Bailey, Randall E.

2005-01-01

NASA's Synthetic Vision Systems (SVS) project is developing technologies with practical applications to potentially eliminate low visibility conditions as a causal factor to civil aircraft accidents while replicating the operational benefits of clear day flight operations, regardless of the actual outside visibility condition. A major thrust of the SVS project involves the development/demonstration of affordable, certifiable display configurations that provide intuitive out-the-window terrain and obstacle information with advanced guidance for commercial and business aircraft. This experiment evaluated the influence of different pathway and guidance display concepts upon pilot situation awareness (SA), mental workload, and flight path tracking performance for Synthetic Vision display concepts using a Head-Up Display (HUD). Two pathway formats (dynamic and minimal tunnel presentations) were evaluated against a baseline condition (no tunnel) during simulated instrument meteorological conditions approaches to Reno-Tahoe International airport. Two guidance cues (tadpole, follow-me aircraft) were also evaluated to assess their influence. Results indicated that the presence of a tunnel on an SVS HUD had no effect on flight path performance but that it did have significant effects on pilot SA and mental workload. The dynamic tunnel concept with the follow-me aircraft guidance symbol produced the lowest workload and provided the highest SA among the tunnel concepts evaluated.

Co-disposal of electronic waste with municipal solid waste in bioreactor landfills.

PubMed

Visvanathan, C; Visvanthan, C; Yin, Nang Htay; Karthikeyan, Obuli P

2010-12-01

Three pilot scale lysimeters were adopted to evaluate the stability pattern and leaching potential of heavy metals from MSW landfills under the E-waste co-disposed condition. One lysimeter served as control and solely filled with MSW, whereas the other two lysimeters were provided with 10% and 25% of E-waste scraps (% by weight), respectively. The reactors were monitored over a period of 280 days at ambient settings with continuous leachate recirculation. Stabilization pattern of carbon appears to be more than 50% in all the three lysimeters with irrespective of their operating conditions. Iron and zinc concentrations were high in leachate during bioreactor landfill operation and correlating with the TCLP leachability test results. In contrast, Pb concentration was around <0.6 mg/L, but which showed maximum leaching potential under TCLP test conditions. But, no heavy metal accumulation was found with leachate recirculation practices in lysimeters. Mobility of the metal content from the E-waste was found to be amplified with the long term disposal or stabilization within landfills. The results showed that the TCLP test cannot be completely reliable tool for measuring long-term leachability of toxic substances under landfill condition; rather landfill lysimeter studies are necessary to get the real scenario. Copyright © 2010 Elsevier Ltd. All rights reserved.

An investigation on wireless sensors for asset management and health monitoring of civil structures

NASA Astrophysics Data System (ADS)

Furkan, Mustafa; Mao, Qiang; Mazzotti, Matteo; DeVitis, John; Sumitro, S. Paul; Faridazar, Fred; Aktan, A. Emin; Moon, Franklin; Bartoli, Ivan

2016-04-01

Application of wireless sensors and sensor networks for Structural Health Monitoring has been investigated for a long time. Key limitations for practical use are energy requirements, connectivity, and integration with existing systems. Current sensors and sensor networks mainly rely on wired connectivity for communication and external power source for energy. This paper presents a suite of wireless sensors that are low-cost, maintenance free, rugged, and have long service life. The majority of the sensors considered were designed by transforming existing, proven, and robust wired sensors into wireless units. In this study, the wireless sensors were tested in laboratory conditions for calibration and evaluation along with wired sensors. The experimental results were also compared to theoretical results. The tests mostly show satisfactory performance of the wireless units. This work is part of a broader Federal Highway Administration sponsored project intended to ultimately validate a wireless sensing system on a real, operating structure to account for all the uncertainties, environmental conditions and operational variability that are encountered in the field.

Fuzzy logic based sensor performance evaluation of vehicle mounted metal detector systems

NASA Astrophysics Data System (ADS)

Abeynayake, Canicious; Tran, Minh D.

2015-05-01

Vehicle Mounted Metal Detector (VMMD) systems are widely used for detection of threat objects in humanitarian demining and military route clearance scenarios. Due to the diverse nature of such operational conditions, operational use of VMMD without a proper understanding of its capability boundaries may lead to heavy causalities. Multi-criteria fitness evaluations are crucial for determining capability boundaries of any sensor-based demining equipment. Evaluation of sensor based military equipment is a multi-disciplinary topic combining the efforts of researchers, operators, managers and commanders having different professional backgrounds and knowledge profiles. Information acquired through field tests usually involves uncertainty, vagueness and imprecision due to variations in test and evaluation conditions during a single test or series of tests. This report presents a fuzzy logic based methodology for experimental data analysis and performance evaluation of VMMD. This data evaluation methodology has been developed to evaluate sensor performance by consolidating expert knowledge with experimental data. A case study is presented by implementing the proposed data analysis framework in a VMMD evaluation scenario. The results of this analysis confirm accuracy, practicability and reliability of the fuzzy logic based sensor performance evaluation framework.

A brief history of dermatovenereology in Dubrovnik.

PubMed

Bakija-Konsuo, Ana; Marlais, Matko

2012-01-01

Since its inception, Dubrovnik has been associated with medicine. The citizens of Dubrovnik have felt the need for the development and improvement of public health conditions in their city as the basic conditions of their existence. In this context, we focused our attention on the development of dermatology and venereology to date; from the first hospital Domus Christi to the modern hospital Medarevo; from the first doctors to specialist doctors, who have marked dermatovenereology in Dubrovnik and Croatia. Domus Christi started accepting patients in 1540 as a public sector hospital and operated for more than 350 years. In 1847, doctors Pinelli and Lopišić operated on breast cancer in this hospital with the use of ether narcosis (one year after ether narcosis had been discovered). A doctor is first mentioned in Dubrovnik in 1280, until this time it could be said that there were no doctors. Medical operations were performed by barbers. The first written records of a doctor in Dubrovnik practicing in dermatovenereology are those of military doctor Marko Bibica. In the context of Dubrovnik dermatovenereology, we must mention doctor Luko Stulli, who was the first to describe Mal de Meleda.

Crossing physical simulations of snow conditions and a geographic model of ski area to assess ski resorts vulnerability

NASA Astrophysics Data System (ADS)

François, Hugues; Spandre, Pierre; Morin, Samuel; George-Marcelpoil, Emmanuelle; Lafaysse, Matthieu; Lejeune, Yves

2016-04-01

In order to face climate change, meteorological variability and the recurrent lack of natural snow on the ground, ski resorts adaptation often rely on technical responses. Indeed, since the occurrence of episodes with insufficient snowfalls in the early 1990's, snowmaking has become an ordinary practice of snow management, comparable to grooming, and contributes to optimise the operation of ski resorts. It also participates to the growth of investments and is associated with significant operating costs, and thus represents a new source of vulnerability. The assessment of the actual effects of snowmaking and of snow management practices in general is a real concern for the future of the ski industry. The principal model use to simulate snow conditions in resorts, Ski Sim, has also been moving this way. Its developers introduced an artificial input of snow on ski area to complete natural snowfalls and considered different organisations of ski lifts (lower and upper zones). However the use of a degree-day model prevents them to consider the specific properties of artificial snow and the impact of grooming on the snowpack. A first proof of concept in the French Alps has shown the feasibility and the interest to cross the geographic model of ski areas and the output of the physically-based reanalysis of snow conditions SAFRAN - Crocus (François et al., CRST 2014). Since these initial developments, several ways have been explored to refine our model. A new model of ski areas has been developed. Our representation is now based on gravity derived from a DEM and ski lift localisation. A survey about snow management practices also allowed us to define criteria in order to model snowmaking areas given ski areas properties and tourism infrastructures localisation. We also suggest to revisit the assessment of ski resort viability based on the "one hundred days rule" based on natural snow depth only. Indeed, the impact of snow management must be considered so as to propose reliability indices that are both physically and socio-economically meaningful. Our contribution proposes to present these works in the context of a test resort in the French Alps and its snow conditions during the period 2000-2012. In order to show the impact of different management practices three configurations are considered: natural snowfalls, groomed natural snowfalls and managed snow (natural and artificial snowpack combined with grooming) and discuss the implications of the results in terms of the assessment of the climate vulnerability of ski resorts.

Flow range enhancement by secondary flow effect in low solidity circular cascade diffusers

NASA Astrophysics Data System (ADS)

Sakaguchi, Daisaku; Tun, Min Thaw; Mizokoshi, Kanata; Kishikawa, Daiki

2014-08-01

High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating the efficiency at design flow rate. A numerical simulation is very effective in design procedure, however, cost of the numerical simulation is generally high during the practical design process, and it is difficult to confirm the optimal design which is combined with many parameters. A multi-objective optimization technique is the idea that has been proposed for solving the problem in practical design process. In this study, a Low Solidity circular cascade Diffuser (LSD) in a centrifugal blower is successfully designed by means of multi-objective optimization technique. An optimization code with a meta-model assisted evolutionary algorithm is used with a commercial CFD code ANSYS-CFX. The optimization is aiming at improving the static pressure coefficient at design point and at low flow rate condition while constraining the slope of the lift coefficient curve. Moreover, a small tip clearance of the LSD blade was applied in order to activate and to stabilize the secondary flow effect at small flow rate condition. The optimized LSD blade has an extended operating range of 114 % towards smaller flow rate as compared to the baseline design without deteriorating the diffuser pressure recovery at design point. The diffuser pressure rise and operating flow range of the optimized LSD blade are experimentally verified by overall performance test. The detailed flow in the diffuser is also confirmed by means of a Particle Image Velocimeter. Secondary flow is clearly captured by PIV and it spreads to the whole area of LSD blade pitch. It is found that the optimized LSD blade shows good improvement of the blade loading in the whole operating range, while at small flow rate the flow separation on the LSD blade has been successfully suppressed by the secondary flow effect.

Remote Sensing and Modeling for Improving Operational Aquatic Plant Management

NASA Technical Reports Server (NTRS)

Bubenheim, Dave

2016-01-01

The California Sacramento-San Joaquin River Delta is the hub for California’s water supply, conveying water from Northern to Southern California agriculture and communities while supporting important ecosystem services, agriculture, and communities in the Delta. Changes in climate, long-term drought, water quality changes, and expansion of invasive aquatic plants threatens ecosystems, impedes ecosystem restoration, and is economically, environmentally, and sociologically detrimental to the San Francisco Bay/California Delta complex. NASA Ames Research Center and the USDA-ARS partnered with the State of California and local governments to develop science-based, adaptive-management strategies for the Sacramento-San Joaquin Delta. The project combines science, operations, and economics related to integrated management scenarios for aquatic weeds to help land and waterway managers make science-informed decisions regarding management and outcomes. The team provides a comprehensive understanding of agricultural and urban land use in the Delta and the major water sheds (San Joaquin/Sacramento) supplying the Delta and interaction with drought and climate impacts on the environment, water quality, and weed growth. The team recommends conservation and modified land-use practices and aids local Delta stakeholders in developing management strategies. New remote sensing tools have been developed to enhance ability to assess conditions, inform decision support tools, and monitor management practices. Science gaps in understanding how native and invasive plants respond to altered environmental conditions are being filled and provide critical biological response parameters for Delta-SWAT simulation modeling. Operational agencies such as the California Department of Boating and Waterways provide testing and act as initial adopter of decision support tools. Methods developed by the project can become routine land and water management tools in complex river delta systems.

Feasibility of CO/sub 2/ monitoring to assess air quality in mines using diesel equipment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel, J.H. Jr.

1987-01-01

The methodology includes: (1) establishing pollutant to CO/sub 2/ ratios for in-service equipment, (2) estimating pollutant concentrations from the ratios and in-mine CO/sub 2/ measurements, and (3) using an air quality index to combine the pollutants into a single number, which indicates the health hazard associated with the pollutants. For the methodology to be valid, the pollutant to CO/sub 2/ ratios must remain constant if engine operating conditions do not significantly change. However, due to the complex dynamics of the fuel injection system, the fuel-air combustion process, and the engine speed-load governing system, the pollutant to CO/sub 2/ ratios maymore » vary during repetitive, but transient engine speed-and-load operation. These transient effects were investigated. In addition, the influence of changing engine conditions due to engine maladjustment, and a practical means to evaluate engine condition were investigated to advance the methodology. The laboratory investigation determined that CO/sub 2/ is an effective indicator of engine exhaust pollutants. It was shown that the exhaust concentrations of carbon monoxide, carbon dioxide, oxides of nitrogen, hydrocarbons, and particulate matter do not significantly vary among repetitive, but transient engine speed-and-load duty cycles typical of in-service equipment. Based on an air quality index and threshold limit values, particulate matter exhibited the greatest adverse effect on air quality. Particulate mass was separated into volatile (organic soluble fraction) and nonvolatile (insoluble carbon fraction) components. Due to particulate concentrations, the engine operating conditions of overfueling and advanced injector timing had greater adverse effects on air quality than the conditions of retarded injector timing, intake air restriction, and Federal certification specifications.« less

FeF(3) catalyzed cascade C-C and C-N bond formation: synthesis of differentially substituted triheterocyclic benzothiazole functionalities under solvent-free condition.

PubMed

Atar, Amol B; Jeong, Yeon Tae

2014-05-01

A series of diverse polyfunctionalized triheterocyclic benzothiazoles were easily prepared in excellent yields via the Biginelli reaction of 2-aminobenzothiazole with substituted benzaldehydes and α-methylene ketones using FeF(3) as an expeditious catalyst under solvent-free conditions. The protocol provides a practical and straightforward approach toward highly functionalized triheterocyclic benzothiazole derivatives in excellent yields. The reaction was conveniently promoted by FeF(3) and the catalyst could be recovered easily after the reaction and reused without any loss of its catalytic activity. The advantageous features of this methodology are high atom economy, operational simplicity, shorter reaction time, convergence, and facile automation.

Stability analysis for acoustic wave propagation in tilted TI media by finite differences

NASA Astrophysics Data System (ADS)

Bakker, Peter M.; Duveneck, Eric

2011-05-01

Several papers in recent years have reported instabilities in P-wave modelling, based on an acoustic approximation, for inhomogeneous transversely isotropic media with tilted symmetry axis (TTI media). In particular, instabilities tend to occur if the axis of symmetry varies rapidly in combination with strong contrasts of medium parameters, which is typically the case at the foot of a steeply dipping salt flank. In a recent paper, we have proposed and demonstrated a P-wave modelling approach for TTI media, based on rotated stress and strain tensors, in which the wave equations reduce to a coupled set of two second-order partial differential equations for two scalar stress components: a normal component along the variable axis of symmetry and a lateral component of stress in the plane perpendicular to that axis. Spatially constant density is assumed in this approach. A numerical discretization scheme was proposed which uses discrete second-derivative operators for the non-mixed second-order derivatives in the wave equations, and combined first-derivative operators for the mixed second-order derivatives. This paper provides a complete and rigorous stability analysis, assuming a uniformly sampled grid. Although the spatial discretization operator for the TTI acoustic wave equation is not self-adjoint, this operator still defines a complete basis of eigenfunctions of the solution space, provided that the solution space is somewhat restricted at locations where the medium is elliptically anisotropic. First, a stability analysis is given for a discretization scheme, which is purely based on first-derivative operators. It is shown that the coefficients of the central difference operators should satisfy certain conditions. In view of numerical artefacts, such a discretization scheme is not attractive, and the non-mixed second-order derivatives of the wave equation are discretized directly by second-derivative operators. It is shown that this modification preserves stability, provided that the central difference operators of the second-order derivatives dominate over the twice applied operators of the first-order derivatives. In practice, it turns out that this is almost the case. Stability of the desired discretization scheme is enforced by slightly weighting down the mixed second-order derivatives in the wave equation. This has a minor, practically negligible, effect on the kinematics of wave propagation. Finally, it is shown that non-reflecting boundary conditions, enforced by applying a taper at the boundaries of the grid, do not harm the stability of the discretization scheme.

Back Disorder Intervention Strategies for Mass Transit Operators Exposed to Whole-Body VIBRATION—COMPARISON of Two Transit System Approaches and Practices

NASA Astrophysics Data System (ADS)

Johanning, E.

1998-08-01

Occupational long-term whole-body vibration (WBV) has been recognized as a major risk factor for low back disorders, one of the most important reasons for medical impairment and early permanent disability among mass transit operators. Although no firm health and safety vibration exposure threshold limits have been established, the available data suggests that rail vehicle operators would probably fall under the proposed WBV “action levels” of the EU directive provisions for protection from physical hazards. This provision calls for technical, administrative and medical controls. This paper examines and compares the current conditions, provisions and plans of two major mass transit systems, the New Yorker MTA and the Munich MVV. The available data, information and publications (English/German) on working conditions, vibration exposure, epidemiology and intervention strategies (primary and secondary prevention) for rail bound mass transit workers were reviewed. Results strongly suggest that the MTA transit system has currently and in the near future no effective and meaningful controls in place to significantly reduce the WBV exposure of subway operators. It appears that the MVV system has more and better control measures in place to reduce harmful effects of WBV. Results of a scientific evaluation of a participatory, collaborative project in the MVV system suggest that the MVV may have developed a successful method of a “condition prevention” (Verhältnisprävention)—and “behavioral prevention” (Verhaltensprävention) intervention strategy, which appears beneficial for WBV exposed workers with existing low back pain. Long-term outcomes and benefits need to be assessed further.

An assessment of the evaporation and condensation phenomena of lithium during the operation of a Li(d,xn) fusion relevant neutron source.

PubMed

Knaster, J; Kanemura, T; Kondo, K

2016-12-01

The flowing lithium target of a Li(d,xn) fusion relevant neutron source must evacuate the deuteron beam power and generate in a stable manner a flux of neutrons with a broad peak at 14 MeV capable to cause similar phenomena as would undergo the structural materials of plasma facing components of a DEMO like reactors. Whereas the physics of the beam-target interaction are understood and the stability of the lithium screen flowing at the nominal conditions of IFMIF (25 mm thick screen with +/-1 mm surface amplitudes flowing at 15 m/s and 523 K) has been demonstrated, a conclusive assessment of the evaporation and condensation of lithium during operation was missing. First attempts to determine evaporation rates started by Hertz in 1882 and have since been subject of continuous efforts driven by its practical importance; however intense surface evaporation is essentially a non-equilibrium process with its inherent theoretical difficulties. Hertz-Knudsen-Langmuir (HKL) equation with Schrage's 'accommodation factor' η = 1.66 provide excellent agreement with experiments for weak evaporation under certain conditions, which are present during a Li(d,xn) facility operation. An assessment of the impact under the known operational conditions for IFMIF (574 K and 10 -3 Pa on the free surface), with the sticking probability of 1 inherent to a hot lithium gas contained in room temperature steel walls, is carried out. An explanation of the main physical concepts to adequately place needed assumptions is included.

Social support in the practices of informal providers: The case of patent and proprietary medicine vendors in Nigeria.

PubMed

Sieverding, Maia; Liu, Jenny; Beyeler, Naomi

2015-10-01

The social and institutional environments in which informal healthcare providers operate shape their health and business practices, particularly in contexts where regulatory enforcement is weak. In this study, we adopt a social capital perspective to understanding the social networks on which proprietary and patent medicine vendors (PPMVs) in Nigeria rely for support in the operation of their shops. Data are drawn from 70 in-depth interviews with PPMVs in three states, including interviews with local leaders of the PPMV professional association. We find that PPMVs primarily relied on more senior colleagues and formal healthcare professionals for informational support, including information about new medicines and advice on how to treat specific cases of illness. For instrumental support, including finance, start-up assistance, and intervention with regulatory agencies, PPMVs relied on extended family, the PPMVs with whom they apprenticed, and the leaders of their professional association. PPMVs' networks also provided continual reinforcement of what constitutes good PPMV practice through admonishments to follow scope of practice limitations. These informal reminders, as well as monitoring activities conducted by the professional association, served to reinforce PPMVs' concern with avoiding negative customer health outcomes, which were perceived to be detrimental to their business reputations. That PPMVs' networks both encouraged practices to reduce the likelihood of poor health outcomes, and provided advice regarding customers' health conditions, highlights the potential impact of informal providers' access to different forms of social capital on their delivery of health services, as well as their success as microenterprises. Copyright © 2015 Elsevier Ltd. All rights reserved.

40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

40 CFR 62.15145 - What are the operating practice requirements for my municipal waste combustion unit?

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements for my municipal waste combustion unit? 62.15145 Section 62.15145 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Good Combustion Practices: Operating Requirements § 62.15145 What are the operating practice requirements for my municipal waste combustion unit? (a) You...

40 CFR 60.34b - Emission guidelines for municipal waste combustor operating practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... combustor operating practices. 60.34b Section 60.34b Protection of Environment ENVIRONMENTAL PROTECTION... September 20, 1994 § 60.34b Emission guidelines for municipal waste combustor operating practices. (a) For approval, a State plan shall include emission limits for carbon monoxide at least as protective as the...

40 CFR 60.34b - Emission guidelines for municipal waste combustor operating practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... combustor operating practices. 60.34b Section 60.34b Protection of Environment ENVIRONMENTAL PROTECTION... September 20, 1994 § 60.34b Emission guidelines for municipal waste combustor operating practices. (a) For approval, a State plan shall include emission limits for carbon monoxide at least as protective as the...

40 CFR 60.34b - Emission guidelines for municipal waste combustor operating practices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... combustor operating practices. 60.34b Section 60.34b Protection of Environment ENVIRONMENTAL PROTECTION... September 20, 1994 § 60.34b Emission guidelines for municipal waste combustor operating practices. (a) For approval, a State plan shall include emission limits for carbon monoxide at least as protective as the...

40 CFR 60.34b - Emission guidelines for municipal waste combustor operating practices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... combustor operating practices. 60.34b Section 60.34b Protection of Environment ENVIRONMENTAL PROTECTION... September 20, 1994 § 60.34b Emission guidelines for municipal waste combustor operating practices. (a) For approval, a State plan shall include emission limits for carbon monoxide at least as protective as the...

Simultaneous Cognitive Operations in Working Memory After Dual-Task Practice

ERIC Educational Resources Information Center

Oberauer, Klaus; Kliegl, Reinhold

2004-01-01

The authors tested the hypothesis that with adequate practice, people can execute 2 cognitive operations in working memory simultaneously. In Experiment 1, 6 students practiced updating 2 items in working memory through 2 sequences of operations (1 numerical, 1 spatial). In different blocks, imperative stimuli for the 2 sequences of operations…

Monitoring autocorrelated process: A geometric Brownian motion process approach

NASA Astrophysics Data System (ADS)

Li, Lee Siaw; Djauhari, Maman A.

2013-09-01

Autocorrelated process control is common in today's modern industrial process control practice. The current practice of autocorrelated process control is to eliminate the autocorrelation by using an appropriate model such as Box-Jenkins models or other models and then to conduct process control operation based on the residuals. In this paper we show that many time series are governed by a geometric Brownian motion (GBM) process. Therefore, in this case, by using the properties of a GBM process, we only need an appropriate transformation and model the transformed data to come up with the condition needs in traditional process control. An industrial example of cocoa powder production process in a Malaysian company will be presented and discussed to illustrate the advantages of the GBM approach.

Driving safety in elderly individuals.

PubMed

Marottoli, R A

1993-05-01

Driving safety in elderly individuals is becoming an increasingly important issue in geriatrics and in medical practice. The number of elderly drivers is increasing as the population ages, and especially as current generations of female drivers age. Concern is raised about their safe operation of motor vehicles because of the increasing likelihood with advancing age of developing conditions that may adversely affect the visual, cognitive, and motor abilities integral to driving. But this issue is not only a medical one, since there are social and political components as well. This discussion will describe the background of this issue, focus on the changes that may occur with aging and their potential relationship to driving ability, and, finally, will outline an approach that physicians may employ in their practice.

A Case Series of the Probability Density and Cumulative Distribution of Laryngeal Disease in a Tertiary Care Voice Center.

PubMed

de la Fuente, Jaime; Garrett, C Gaelyn; Ossoff, Robert; Vinson, Kim; Francis, David O; Gelbard, Alexander

2017-11-01

To examine the distribution of clinic and operative pathology in a tertiary care laryngology practice. Probability density and cumulative distribution analyses (Pareto analysis) was used to rank order laryngeal conditions seen in an outpatient tertiary care laryngology practice and those requiring surgical intervention during a 3-year period. Among 3783 new clinic consultations and 1380 operative procedures, voice disorders were the most common primary diagnostic category seen in clinic (n = 3223), followed by airway (n = 374) and swallowing (n = 186) disorders. Within the voice strata, the most common primary ICD-9 code used was dysphonia (41%), followed by unilateral vocal fold paralysis (UVFP) (9%) and cough (7%). Among new voice patients, 45% were found to have a structural abnormality. The most common surgical indications were laryngotracheal stenosis (37%), followed by recurrent respiratory papillomatosis (18%) and UVFP (17%). Nearly 55% of patients presenting to a tertiary referral laryngology practice did not have an identifiable structural abnormality in the larynx on direct or indirect examination. The distribution of ICD-9 codes requiring surgical intervention was disparate from that seen in clinic. Application of the Pareto principle may improve resource allocation in laryngology, but these initial results require confirmation across multiple institutions.

Knowledge, Attitudes, and Practices for Respiratory and Hearing Health among Midwestern Farmers.

PubMed

Cramer, Mary E; Wendl, Mary J; Sayles, Harlan; Duysen, Ellen; Achutan, Chandran

2017-07-01

The purpose of this study was to assess knowledge, attitudes, and practices for hearing and respiratory health/safety among farmers in seven Midwestern states served by a federally funded Agricultural Center. Findings provided a baseline to longitudinally track the Agricultural Center's program outcomes and to design community education to improve safety and health among farmers. This was a cross-sectional study using a 30 item mailed survey to describe farmers' operations, demographics, health conditions, related information sources, and knowledge/attitude/practices for personal protective equipment (PPE) (i.e., ear plugs/muffs and dust masks/respirators). Frequencies and percentages were calculated for each item and according to responses from younger versus older farmers. The unit of study was farm operators (N = 280) randomly selected from a publicly available database of corn/soybean and hog farmers in seven Midwestern states. Findings revealed important knowledge gaps among respondents regarding (1) hazardous exposure sources; (2) long-term health consequences of noise/dust exposure; (3) proper selection/fitting of PPE. Public health nurses and primary care providers in rural communities should address specific knowledge gaps in order to enhance farmers' perceived understanding of their susceptibility to hazardous exposures. Increasing farmers' knowledge through preferred venues may help to improve PPE effectiveness. © 2016 Wiley Periodicals, Inc.

Multisensor fusion for the detection of mines and minelike targets

NASA Astrophysics Data System (ADS)

Hanshaw, Terilee

1995-06-01

The US Army's Communications and Electronics Command through the auspices of its Night Vision and Electronics Sensors Directorate (CECOM-NVESD) is actively applying multisensor techniques to the detection of mine targets. This multisensor research results from the 'detection activity' with its broad range of operational conditions and targets. Multisensor operation justifies significant attention by yielding high target detection and low false alarm statistics. Furthermore, recent advances in sensor and computing technologies make its practical application realistic and affordable. The mine detection field-of-endeavor has since its WWI baptismal investigated the known spectra for applicable mine observation phenomena. Countless sensors, algorithms, processors, networks, and other techniques have been investigated to determine candidacy for mine detection. CECOM-NVESD efforts have addressed a wide range of sensors spanning the spectrum from gravity field perturbations, magentic field disturbances, seismic sounding, electromagnetic fields, earth penetrating radar imagery, and infrared/visible/ultraviolet surface imaging technologies. Supplementary analysis has considered sensor candidate applicability by testing under field conditions (versus laboratory), in determination of fieldability. As these field conditions directly effect the probability of detection and false alarms, sensor employment and design must be considered. Consequently, as a given sensor's performance is influenced directly by the operational conditions, tradeoffs are necessary. At present, mass produced and fielded mine detection techniques are limited to those incorporating a single sensor/processor methodology such as, pulse induction and megnetometry, as found in hand held detectors. The most sensitive fielded systems can detect minute metal components in small mine targets but result in very high false alarm rates reducing velocity in operation environments. Furthermore, the actual speed of advance for the entire mission (convoy, movement to engagement, etc.) is determined by the level of difficulty presented in clearance or avoidance activities required in response to the potential 'targets' marked throughout a detection activity. Therefore the application of fielded hand held systems to convoy operations in clearly impractical. CECOM-NVESD efforts are presently seeking to overcome these operational limitations by substantially increasing speed of detection while reducing the false alarm rate through the application of multisensor techniques. The CECOM-NVESD application of multisensor techniques through integration/fusion methods will be defined in this paper.

Portable oil bath for high-accuracy resistance transfer and maintenance

NASA Astrophysics Data System (ADS)

Shiota, Fuyuhiko

1999-10-01

A portable oil bath containing one standard resistor for high-accuracy resistance transfer and maintenance was developed and operated for seven years in the National Research Laboratory of Metrology. The aim of the bath is to save labor and apparatus for high-accuracy resistance transfer and maintenance by consistently keeping the standard resistor in an optimum environmental condition. The details of the prototype system, including its performance, are described together with some suggestions for a more practical bath design, which adopts the same concept.

Best Practices for Addressing Combat Operational Stress and Other Behavioral Health Conditions in Marine Corps Substance Abuse Counseling Centers

DTIC Science & Technology

2010-08-02

2000). The relationship between anxiety disorders and alcohol use disorder: A review of major perspectives and findings. Clin Psychol Rev, 20, 149...treatment programs. While at times there have been measureable decreases in heavy alcohol consumption over the past two and a half decades, the most...problems among returning war veterans, or causing some service members to begin abusing alcohol or drugs upon the difficult transition home. A 2004

Nonlinear aerodynamic wing design

NASA Technical Reports Server (NTRS)

Bonner, Ellwood

1985-01-01

The applicability of new nonlinear theoretical techniques is demonstrated for supersonic wing design. The new technology was utilized to define outboard panels for an existing advanced tactical fighter model. Mach 1.6 maneuver point design and multi-operating point compromise surfaces were developed and tested. High aerodynamic efficiency was achieved at the design conditions. A corollary result was that only modest supersonic penalties were incurred to meet multiple aerodynamic requirements. The nonlinear potential analysis of a practical configuration arrangement correlated well with experimental data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nephew, E.A.; Abbatiello, L.A.; Ballou, M.L.

The basic concept of the Annual Cycle Energy System (ACES) - an integrated system for supplying space heating, hot water, and air conditioning to a building - and the theory underlying its design and operation are described. Practical procedures for designing an ACES for a single-family residence, together with recommended guidelines for the construction and installation of system components, are presented. Methods are discussed for estimating the life-cycle cost, component sizes, and annual energy consumption of the system for residential applications in different climatic regions of the US.

Industry and water security: overarching conclusions.

PubMed

Stigson, B

2001-01-01

Fresh water is key to sustainable development. World Business Council for Sustainable Development members are addressing fresh water use "within the corporate fenceline". However, to address water issues "outside the corporate fenceline" will require creative new public-private partnerships. Government's role is to provide sound framework conditions that will encourage businesses to invest time, staff and resources to address vital fresh water issues. Industry is committed to best practice within its internal operations and is ready to enter into partnerships to address broader fresh water issues.

Direct one-pot reductive amination of aldehydes with nitroarenes in a domino fashion: catalysis by gum-acacia-stabilized palladium nanoparticles.

PubMed

Sreedhar, B; Reddy, P Surendra; Devi, D Keerthi

2009-11-20

This note describes the direct reductive amination of carbonyl compounds with nitroarenes using gum acacia-palladium nanoparticles, employing molecular hydrogen as the reductant. This methodology is found to be applicable to both aliphatic and aromatic aldehydes and a wide range of nitroarenes. The operational simplicity and the mild reaction conditions add to the value of this method as a practical alternative to the reductive amination of carbonyl compounds.

USDA/federal user of LANDSAT remote sensing

NASA Technical Reports Server (NTRS)

Allen, R.

1981-01-01

Developed and potential uses of remote sensing in crop condition and acreage assessment, renewable resources inventories, conservation practices, and water and forest management applications are described. Operational approaches, the adaptation of procedures to needs, and the agency's concern about data continuity and cost are discussed as well as support for future technology development for enhanced sensing capability. The use of improved camera systems for soil mapping and conservation monitoring from space shuttle, and of aerospace radar to improve soil moisture monitoring are mentioned.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scientists set a new world record for converting non-concentrated sunlight into electricity using a dual-junction III-V/Si solar cell. National Renewable Energy Laboratory (NREL) and Swiss Center for Electronics and Microtechnology (CSEM) scientists have collaborated to create a novel tandem solar cell that operates at 29.8% conversion efficiency under non-concentrator (1-sun) conditions. In comparison, the 1-sun efficiency of a silicon (Si) single-junction solar cell is probably still a few years away from converging on its practical limit of about 26%.

Advanced Operational Aviation Medicine Course, (4th), held at Royal Air Force Institute of Aviation Medicine, Farnborough, Hampshire on 17-26 June 1975

DTIC Science & Technology

1976-05-01

possible. A life raft with an inflatable floor and a canopy provides good protection against -i chill. Frequent practice drills and experience of the...and equLpeant that will protect him from the coldl but military experience has shown that succems In such adverse onditions depends far nor* upon the...under such extreme conditions comes mainly from experience and training in that particular environmant and inKprovevents in mental and manual

Best Practices for Port Operations

EPA Pesticide Factsheets

This page provides links to best practice resources for port authorities, terminal operators and fleet owners, drayage truckers, and rail and locomotives as well as a link to case studies on best practice.

Net one, net two: the primary care network income statement.

PubMed

Halley, M D; Little, A W

1999-10-01

Although hospital-owned primary care practices have been unprofitable for most hospitals, some hospitals are achieving competitive advantage and sustainable practice operations. A key to the success of some has been a net income reporting tool that separates practice operating expenses from the costs of creating and operating a network of practices to help healthcare organization managers, physicians, and staff to identify opportunities to improve the network's financial performance. This "Net One, Net Two" reporting allows operations leadership to be held accountable for Net One expenses and strategic leadership to be held accountable for Net Two expenses.

Role of Gastrografin in assigning patients to a non-operative course in adhesive small bowel obstruction.

PubMed

Roadley, Graeme; Cranshaw, Isaac; Young, Michael; Hill, Andrew G

2004-10-01

Adhesive small bowel obstruction (SBO) is a common surgical emergency. Water soluble contrast agents have been used to identify patients who might be treated non-operatively rather than operatively. The present study was designed to audit the introduction of such use of Gastrografin contrast into clinical practice. Patients presenting acutely to hospital with clinically suspected and radiologically proven SBO were entered in the study. As soon as practicable, 100 mL of undiluted Gastrografin was given either orally or by the nasogastric tube (which was then spigotted). After 4 h, a plain supine abdominal X-ray (AXR) was taken. If the contrast was seen in the large bowel, and there had been no deterioration in the patient's condition, then non-operative treatment was continued. If the contrast remained in the small bowel, a clinical judgement was made as to whether to proceed with operative intervention. A group of historical controls were obtained by a retrospective review of the hospital medical records through data obtained from the Department of General Surgery Audit System. Twenty-five patients were entered into the study. In 20 of these patients the contrast was seen to arrive in the large bowel at 4 h. All of these patients completed a non-operative course to full recovery. In another two patients a successful decision was made to pursue a non-operative management strategy. These 22 patients had a mean hospital stay of 3.9 days. Eighty historical controls had successfully completed a non-operative course for SBO. They had a mean hospital stay of 5.6 days. This was significantly longer than that of the Gastrografin group (P < 0.016, t-test). This paper has demonstrated that undiluted Gastrografin may be safely used to assign patients to a non-operative management plan and this results in a decreased hospital stay.

Ergonomics, automation and logistics: practical and effective combination of working methods, a case study of a baking company.

PubMed

Quintana, Leonardo; Arias, Claudia; Cordoba, Jorge; Moroy, Magda; Pulido, Jean; Ramirez, Angela

2012-01-01

The aim of this study was to combine three different analytical methods from three different disciplines to diagnose the ergonomic conditions, manufacturing and supply chain operation of a baking company. The study explores a summary of comprehensive working methods that combines the ergonomics, automation and logistics study methods in the diagnosis of working conditions and productivity. The participatory approach of this type of study that involves the feelings and first-hand knowledge of workers of the operation are determining factors in defining points of action and ergonomic interventions, as well as defining opportunities in the automation of manufacturing and logistics, to cope with the needs of the company. The study identified an ergonomic situation (high prevalence of wrist-hand pain), and the combination of interdisciplinary techniques applied allowed to improve this condition in the company. This type of study allows a primary basis of the opportunities presented by the combination of specialized methods of different disciplines, for the definition of comprehensive action plans for the company. Additionally, it outlines opportunities for improvement and recommendations to mitigate the burden associated with occupational diseases and as an end result improve the quality of life and productivity of workers.

A Potential Treatment for Post-Flight Orthostatic Intolerance in Aero-Space Crews: Autogenic-Feedback Training

NASA Technical Reports Server (NTRS)

Cowings, P. S.; Toscano, W. B.; Miller, N. E.; Pickering, T. G.; Shapiro, D.

1994-01-01

Postflight orthostatic intolerance has been identified as a serious biomedical problem associated with long duration exposure to microgravity in space. High priority has been given to the development of countermeasures for this disorder which are both effective and practical. A considerable body of clinical research has demonstrated that people can be taught to increase their own blood pressure voluntarily and that this is an effective treatment for chronic Orthostatic intolerance in paralyzed patients. The present pilot study was designed to examine the feasibility of adding training in control of blood pressure to an existing preflight training program designed to facilitate astronaut adaptation to microgravity. Using in operant conditioning procedure, Autogenic-Feedback Training (AFT), three men and two women participated in four to nine (15-30 training sessions). At the end of training ranged between 20 and 50 mm Hg under both supine and 450 head-up tilt conditions. These findings suggest that AFT may be a useful alternative treatment or supplement to existing approaches for preventing postflight Orthostatic intolerance. Further, the use of operant conditioning methods for training cardiovascular responses may contribute to the general understanding of the mechanisms of orthostatic intolerance.

Application of KinectTM and wireless technology for patient data recording and viewing system in the course of surgery

NASA Astrophysics Data System (ADS)

Ong, Aira Patrice R.; Bugtai, Nilo T.; Aldaba, Luis Miguel M.; Madrangca, Astrid Valeska H.; Que, Giselle V.; Que, Miles Frederick L.; Tan, Kean Anderson. S.

2017-02-01

In modern operating room (OR) conditions, a patient's computed tomography (CT) or magnetic resonance imaging (MRI) scans are some of the most important resources during surgical procedures. In practice, the surgeon is impelled to scrub out and back in every time he needs to scroll through scan images in mid-operation. To prevent leaving the operating table, many surgeons rely on assistants or nurses and give instructions to manipulate the computer for them, which can be cumbersome and frustrating. As a motivation for this study, the use of touchless (non-contact) gesture-based interface in medical practice is incorporated to have aseptic interactions with the computer systems and with the patient's data. The system presented in this paper is composed of three main parts: the Trek Ai-Ball Camera, the Microsoft Kinect™, and the computer software. The incorporation of these components and the developed software allows the user to perform 13 hand gestures, which have been tested to be 100 percent accurate. Based on the results of the tests performed on the system performance, the conclusions made regarding the time efficiency of the viewing system, the quality and the safety of the recording system has gained positive feedback from consulting doctors.

Is operational research delivering the goods? The journey to success in low-income countries.

PubMed

Zachariah, Rony; Ford, Nathan; Maher, Dermot; Bissell, Karen; Van den Bergh, Rafael; van den Boogaard, Wilma; Reid, Tony; Castro, Kenneth G; Draguez, Bertrand; von Schreeb, Johan; Chakaya, Jeremiah; Atun, Rifat; Lienhardt, Christian; Enarson, Don A; Harries, Anthony D

2012-05-01

Operational research in low-income countries has a key role in filling the gap between what we know from research and what we do with that knowledge-the so-called know-do gap, or implementation gap. Planned research that does not tangibly affect policies and practices is ineffective and wasteful, especially in settings where resources are scarce and disease burden is high. Clear parameters are urgently needed to measure and judge the success of operational research. We define operational research and its relation with policy and practice, identify why operational research might fail to affect policy and practice, and offer possible solutions to address these shortcomings. We also propose measures of success for operational research. Adoption and use of these measures could help to ensure that operational research better changes policy and practice and improves health-care delivery and disease programmes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Fitting primitive shapes in point clouds: a practical approach to improve autonomous underwater grasp specification of unknown objects

NASA Astrophysics Data System (ADS)

Fornas, D.; Sales, J.; Peñalver, A.; Pérez, J.; Fernández, J. J.; Marín, R.; Sanz, P. J.

2016-03-01

This article presents research on the subject of autonomous underwater robot manipulation. Ongoing research in underwater robotics intends to increase the autonomy of intervention operations that require physical interaction in order to achieve social benefits in fields such as archaeology or biology that cannot afford the expenses of costly underwater operations using remote operated vehicles. Autonomous grasping is still a very challenging skill, especially in underwater environments, with highly unstructured scenarios, limited availability of sensors and adverse conditions that affect the robot perception and control systems. To tackle these issues, we propose the use of vision and segmentation techniques that aim to improve the specification of grasping operations on underwater primitive shaped objects. Several sources of stereo information are used to gather 3D information in order to obtain a model of the object. Using a RANSAC segmentation algorithm, the model parameters are estimated and a set of feasible grasps are computed. This approach is validated in both simulated and real underwater scenarios.

40 CFR 63.2378 - How do I demonstrate continuous compliance with the emission limitations, operating limits, and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... compliance with the emission limitations, operating limits, and work practice standards? 63.2378 Section 63... limits, and work practice standards? (a) You must demonstrate continuous compliance with each emission limitation, operating limit, and work practice standard in Tables 2 through 4 to this subpart that applies to...

Design features and operational characteristics of the Langley 0.3-meter transonic cryogenic tunnel

NASA Technical Reports Server (NTRS)

Kilgore, R. A.

1976-01-01

Experience with the Langley 0.3 meter transonic cryogenic tunnel, which is fan driven, indicated that such a tunnel presents no unusual design difficulties and is simple to operate. Purging, cooldown, and warmup times were acceptable and were predicted with good accuracy. Cooling with liquid nitrogen was practical over a wide range of operating conditions at power levels required for transonic testing, and good temperature distributions were obtained by using a simple liquid nitrogen injection system. To take full advantage of the unique Reynolds number capabilities of the 0.3 meter transonic tunnel, it was designed to accommodate test sections other than the original, octagonal, three dimensional test section. A 20- by 60-cm two dimensional test section was recently installed and is being calibrated. A two dimensional test section with self-streamlining walls and a test section incorporating a magnetic suspension and balance system are being considered.

Water-gel for gating graphene transistors.

PubMed

Kim, Beom Joon; Um, Soong Ho; Song, Woo Chul; Kim, Yong Ho; Kang, Moon Sung; Cho, Jeong Ho

2014-05-14

Water, the primary electrolyte in biology, attracts significant interest as an electrolyte-type dielectric material for transistors compatible with biological systems. Unfortunately, the fluidic nature and low ionic conductivity of water prevents its practical usage in such applications. Here, we describe the development of a solid state, megahertz-operating, water-based gate dielectric system for operating graphene transistors. The new electrolyte systems were prepared by dissolving metal-substituted DNA polyelectrolytes into water. The addition of these biocompatible polyelectrolytes induced hydrogelation to provide solid-state integrity to the system. They also enhanced the ionic conductivities of the electrolytes, which in turn led to the quick formation of an electric double layer at the graphene/electrolyte interface that is beneficial for modulating currents in graphene transistors at high frequencies. At the optimized conditions, the Na-DNA water-gel-gated flexible transistors and inverters were operated at frequencies above 1 MHz and 100 kHz, respectively.

Advanced active health monitoring system of liquid rocket engines

NASA Astrophysics Data System (ADS)

Qing, Xinlin P.; Wu, Zhanjun; Beard, Shawn; Chang, Fu-Kuo

2008-11-01

An advanced SMART TAPE system has been developed for real-time in-situ monitoring and long term tracking of structural integrity of pressure vessels in liquid rocket engines. The practical implementation of the structural health monitoring (SHM) system including distributed sensor network, portable diagnostic hardware and dedicated data analysis software is addressed based on the harsh operating environment. Extensive tests were conducted on a simulated large booster LOX-H2 engine propellant duct to evaluate the survivability and functionality of the system under the operating conditions of typical liquid rocket engines such as cryogenic temperature, vibration loads. The test results demonstrated that the developed SHM system could survive the combined cryogenic temperature and vibration environments and effectively detect cracks as small as 2 mm.

Measurement environments and testing

NASA Astrophysics Data System (ADS)

Marvin, A. C.

1991-06-01

The various methods used to assess both the emission (interference generation) performance of electronic equipment and the immunity of electronic equipment to external electromagnetic interference are described. The measurement methods attempt to simulate realistic operating conditions for the equipment being tested, yet at the same time they must be repeatable and practical to operate. This has led to the development of a variety of test methods, each of which has its limitations. Concentration is on the most common measurement methods such as open-field test sites, screened enclosures and transverse electromagnetic (TEM) cells. The physical justification for the methods, their limitations, and measurement precision are described. Ways of relating similar measurements made by different methods are discussed, and some thoughts on future measurement improvements are presented.

Durability of bends in high-temperature steam lines under the conditions of long-term operation

NASA Astrophysics Data System (ADS)

Katanakha, N. A.; Semenov, A. S.; Getsov, L. B.

2015-04-01

The article presents the results of stress-strain state computations and durability of bent and steeply curved branches of high-temperature steam lines carried out on the basis of the finite element method using the modified Soderberg formula for describing unsteady creep processes with taking the accumulation of damage into account. The computations were carried out for bends made of steel grades that are most widely used for manufacturing steam lines (12Kh1MF, 15Kh1M1F, and 10Kh9MFB) and operating at different levels of inner pressure and temperature. The solutions obtained using the developed creep model are compared with those obtained using the models widely used in practice.

A Step Towards CO2-Neutral Aviation

NASA Technical Reports Server (NTRS)

Brankovic, Andreja; Ryder, Robert C.; Hendricks, Robert C.; Huber, Marcia L.

2008-01-01

An approximation method for evaluation of the caloric equations used in combustion chemistry simulations is described. The method is applied to generate the equations of specific heat, static enthalpy, and Gibb's free energy for fuel mixtures of interest to gas turbine engine manufacturers. Liquid-phase fuel properties are also derived. The fuels investigated include JP-8, synthetic fuel, and two blends of JP-8 and synthetic fuel. The complete set of fuel property equations for both phases are implemented into a computational fluid dynamics (CFD) flow solver database, and multiphase, reacting flow simulations of a well-tested liquid-fueled combustor are performed. The simulations are a first step in understanding combustion system performance and operational issues when using alternate fuels, at practical engine operating conditions.

Electron Lens Construction for the Integrable Optics Test Accelerator at Fermilab

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGee, Mike; Carlson, Kermit; Nobrega, Lucy

The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p⁺) diagnostic test ring. Construction of an electron lens for IOTA is necessary for both electron and proton operation. Components required for the Electron Lens design include; a 0.8 T conventional water-cooled main solenoid, and magnetic bending and focusing elements. The foundation of the design relies on repurposing the Fermilab Tevatron Electron Lens II (TELII)more » gun and collector under ultra-high vacuum (UHV) conditions.« less

Monitoring injury in the New Zealand adventure tourism sector: an operator survey.

PubMed

Bentley, Tim A; Page, Stephen; Edwards, Joanna

2008-01-01

Client safety is a major risk management concern for the commercial adventure tourism sector in New Zealand. This study built on previous exploratory analyses of New Zealand adventure tourism safety, including industry surveys conducted by these authors in 1999 and 2003. The aims of the study were to provide a continuation of injury monitoring across the sector through data collected from self-reported injury incidence by industry operators and to compare findings with those from other primary and secondary research studies conducted by the authors. A postal questionnaire was used to survey all identifiable New Zealand adventure tourism operators during 2006. The questionnaire asked respondents about their recorded client injury experience, perceptions of client injury risk factors, and safety management practices. Some 21 adventure tourism activities were represented among the responding sample (n = 127), with most operations being very small in terms of staff numbers, although responding operators catered to nearly 1 million clients in total annually. Highest ranked risk factors for client injury included clients not following instructions; level of client skill, ability, and fitness; and changeable/unpredictable weather conditions. Highest client injury was reported for horse riding, ecotourism, and white water rafting sectors, although serious underreporting of minor injuries was evidenced across the sector. Slips, trips, and falls were the most frequently reported injury mechanism, while safety management measures were inconsistently applied across the sector. The industry should address reporting culture issues and safety management practices generally. Specifically, the industry should consider risk management that focuses on minor (eg, falls) as well as catastrophic events.

Simulation Evaluation of Pilot Inputs for Real Time Modeling During Commercial Flight Operations

NASA Technical Reports Server (NTRS)

Martos, Borja; Ranaudo, Richard; Oltman, Ryan; Myhre, Nick

2017-01-01

Aircraft dynamics characteristics can only be identified from flight data when the aircraft dynamics are excited sufficiently. A preliminary study was conducted into what types and levels of manual piloted control excitation would be required for accurate Real-Time Parameter IDentification (RTPID) results by commercial airline pilots. This includes assessing the practicality for the pilot to provide this excitation when cued, and to further understand if pilot inputs during various phases of flight provide sufficient excitation naturally. An operationally representative task was evaluated by 5 commercial airline pilots using the NASA Ice Contamination Effects Flight Training Device (ICEFTD). Results showed that it is practical to use manual pilot inputs only as a means of achieving good RTPID in all phases of flight and in flight turbulence conditions. All pilots were effective in satisfying excitation requirements when cued. Much of the time, cueing was not even necessary, as just performing the required task provided enough excitation for accurate RTPID estimation. Pilot opinion surveys reported that the additional control inputs required when prompted by the excitation cueing were easy to make, quickly mastered, and required minimal training.

Simulation and optimization of a coking wastewater biological treatment process by activated sludge models (ASM).

PubMed

Wu, Xiaohui; Yang, Yang; Wu, Gaoming; Mao, Juan; Zhou, Tao

2016-01-01

Applications of activated sludge models (ASM) in simulating industrial biological wastewater treatment plants (WWTPs) are still difficult due to refractory and complex components in influents as well as diversity in activated sludges. In this study, an ASM3 modeling study was conducted to simulate and optimize a practical coking wastewater treatment plant (CWTP). First, respirometric characterizations of the coking wastewater and CWTP biomasses were conducted to determine the specific kinetic and stoichiometric model parameters for the consecutive aeration-anoxic-aeration (O-A/O) biological process. All ASM3 parameters have been further estimated and calibrated, through cross validation by the model dynamic simulation procedure. Consequently, an ASM3 model was successfully established to accurately simulate the CWTP performances in removing COD and NH4-N. An optimized CWTP operation condition could be proposed reducing the operation cost from 6.2 to 5.5 €/m(3) wastewater. This study is expected to provide a useful reference for mathematic simulations of practical industrial WWTPs. Copyright © 2015 Elsevier Ltd. All rights reserved.

An ethnographic exploration of influences on prescribing in general practice: why is there variation in prescribing practices?

PubMed

Grant, Aileen; Sullivan, Frank; Dowell, Jon

2013-06-21

Prescribing is a core activity for general practitioners, yet significant variation in the quality of prescribing has been reported. This suggests there may be room for improvement in the application of the current best research evidence. There has been substantial investment in technologies and interventions to address this issue, but effect sizes so far have been small to moderate. This suggests that prescribing is a decision-making process that is not sufficiently understood. By understanding more about prescribing processes and the implementation of research evidence, variation may more easily be understood and more effective interventions proposed. An ethnographic study in three Scottish general practices with diverse organizational characteristics. Practices were ranked by their performance against Audit Scotland prescribing quality indicators, incorporating established best research evidence. Two practices of high prescribing quality and one practice of low prescribing quality were recruited. Participant observation, formal and informal interviews, and a review of practice documentation were employed. Practices ranked as high prescribing quality consistently made and applied macro and micro prescribing decisions, whereas the low-ranking practice only made micro prescribing decisions. Macro prescribing decisions were collective, policy decisions made considering research evidence in light of the average patient, one disease, condition, or drug. Micro prescribing decisions were made in consultation with the patient considering their views, preferences, circumstances and other conditions (if necessary).Although micro prescribing can operate independently, the implementation of evidence-based, quality prescribing was attributable to an interdependent relationship. Macro prescribing policy enabled prescribing decisions to be based on scientific evidence and applied consistently where possible. Ultimately, this influenced prescribing decisions that occur at the micro level in consultation with patients. General practitioners in the higher prescribing quality practices made two different 'types' of prescribing decision; macro and micro. Macro prescribing informs micro prescribing and without a macro basis to draw upon the low-ranked practice had no effective mechanism to engage with, reflect on and implement relevant evidence. Practices that recognize these two levels of decision making about prescribing are more likely to be able to implement higher quality evidence.

An ethnographic exploration of influences on prescribing in general practice: why is there variation in prescribing practices?

PubMed Central

2013-01-01

Background Prescribing is a core activity for general practitioners, yet significant variation in the quality of prescribing has been reported. This suggests there may be room for improvement in the application of the current best research evidence. There has been substantial investment in technologies and interventions to address this issue, but effect sizes so far have been small to moderate. This suggests that prescribing is a decision-making process that is not sufficiently understood. By understanding more about prescribing processes and the implementation of research evidence, variation may more easily be understood and more effective interventions proposed. Methods An ethnographic study in three Scottish general practices with diverse organizational characteristics. Practices were ranked by their performance against Audit Scotland prescribing quality indicators, incorporating established best research evidence. Two practices of high prescribing quality and one practice of low prescribing quality were recruited. Participant observation, formal and informal interviews, and a review of practice documentation were employed. Results Practices ranked as high prescribing quality consistently made and applied macro and micro prescribing decisions, whereas the low-ranking practice only made micro prescribing decisions. Macro prescribing decisions were collective, policy decisions made considering research evidence in light of the average patient, one disease, condition, or drug. Micro prescribing decisions were made in consultation with the patient considering their views, preferences, circumstances and other conditions (if necessary). Although micro prescribing can operate independently, the implementation of evidence-based, quality prescribing was attributable to an interdependent relationship. Macro prescribing policy enabled prescribing decisions to be based on scientific evidence and applied consistently where possible. Ultimately, this influenced prescribing decisions that occur at the micro level in consultation with patients. Conclusion General practitioners in the higher prescribing quality practices made two different ‘types’ of prescribing decision; macro and micro. Macro prescribing informs micro prescribing and without a macro basis to draw upon the low-ranked practice had no effective mechanism to engage with, reflect on and implement relevant evidence. Practices that recognize these two levels of decision making about prescribing are more likely to be able to implement higher quality evidence. PMID:23799906

Sustainable Rest Area Design and Operations

DOT National Transportation Integrated Search

2017-10-01

One way in which State Departments of Transportation (DOTs) can modernize their rest areas while reducing operations and maintenance costs is by incorporating sustainable practices into rest area design and operations. Sustainability practices that D...

Efficient generation of receiver operating characteristics for the evaluation of damage detection in practical structural health monitoring applications.

PubMed

Liu, Chang; Dobson, Jacob; Cawley, Peter

2017-03-01

Permanently installed guided wave monitoring systems are attractive for monitoring large structures. By frequently interrogating the test structure over a long period of time, such systems have the potential to detect defects much earlier than with conventional one-off inspection, and reduce the time and labour cost involved. However, for the systems to be accepted under real operational conditions, their damage detection performance needs to be evaluated in these practical settings. The receiver operating characteristic (ROC) is an established performance metric for one-off inspections, but the generation of the ROC requires many test structures with realistic damage growth at different locations and different environmental conditions, and this is often impractical. In this paper, we propose an evaluation framework using experimental data collected over multiple environmental cycles on an undamaged structure with synthetic damage signatures added by superposition. Recent advances in computation power enable examples covering a wide range of practical scenarios to be generated, and for multiple cases of each scenario to be tested so that the statistics of the performance can be evaluated. The proposed methodology has been demonstrated using data collected from a laboratory pipe specimen over many temperature cycles, superposed with damage signatures predicted for a flat-bottom hole growing at different rates at various locations. Three damage detection schemes, conventional baseline subtraction, singular value decomposition (SVD) and independent component analysis (ICA), have been evaluated. It has been shown that in all cases, the component methods perform significantly better than the residual method, with ICA generally the better of the two. The results have been validated using experimental data monitoring a pipe in which a flat-bottom hole was drilled and enlarged over successive temperature cycles. The methodology can be used to evaluate the performance of an installed monitoring system and to show whether it is capable of detecting particular damage growth at any given location. It will enable monitoring results to be evaluated rigorously and will be valuable in the development of safety cases.

Efficient generation of receiver operating characteristics for the evaluation of damage detection in practical structural health monitoring applications

PubMed Central

Dobson, Jacob; Cawley, Peter

2017-01-01

Permanently installed guided wave monitoring systems are attractive for monitoring large structures. By frequently interrogating the test structure over a long period of time, such systems have the potential to detect defects much earlier than with conventional one-off inspection, and reduce the time and labour cost involved. However, for the systems to be accepted under real operational conditions, their damage detection performance needs to be evaluated in these practical settings. The receiver operating characteristic (ROC) is an established performance metric for one-off inspections, but the generation of the ROC requires many test structures with realistic damage growth at different locations and different environmental conditions, and this is often impractical. In this paper, we propose an evaluation framework using experimental data collected over multiple environmental cycles on an undamaged structure with synthetic damage signatures added by superposition. Recent advances in computation power enable examples covering a wide range of practical scenarios to be generated, and for multiple cases of each scenario to be tested so that the statistics of the performance can be evaluated. The proposed methodology has been demonstrated using data collected from a laboratory pipe specimen over many temperature cycles, superposed with damage signatures predicted for a flat-bottom hole growing at different rates at various locations. Three damage detection schemes, conventional baseline subtraction, singular value decomposition (SVD) and independent component analysis (ICA), have been evaluated. It has been shown that in all cases, the component methods perform significantly better than the residual method, with ICA generally the better of the two. The results have been validated using experimental data monitoring a pipe in which a flat-bottom hole was drilled and enlarged over successive temperature cycles. The methodology can be used to evaluate the performance of an installed monitoring system and to show whether it is capable of detecting particular damage growth at any given location. It will enable monitoring results to be evaluated rigorously and will be valuable in the development of safety cases. PMID:28413339

40 CFR 63.1654 - Operational and work practice standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

....1650(e). The requirement for the owner or operator to operate the facility according to a written... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Operational and work practice standards... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES...

40 CFR 63.1654 - Operational and work practice standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

....1650(e). The requirement for the owner or operator to operate the facility according to a written... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Operational and work practice standards... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES...

Technology and education: First approach for measuring temperature with Arduino

NASA Astrophysics Data System (ADS)

Carrillo, Alejandro

2017-04-01

This poster session presents some ideas and approaches to understand concepts of thermal equilibrium, temperature and heat in order to bulid a man-nature relationship in a harmonious and responsible manner, emphasizing the interaction between science and technology, without neglecting the relationship of the environment and society, an approach to sustainability. It is proposed the development of practices that involve the use of modern technology, of easy access and low cost to measure temperature. We believe that the Arduino microcontroller and some temperature sensors can open the doors of innovation to carry out such practices. In this work we present some results of simple practices presented to a population of students between the ages of 16 and 17 years old. The practices in this proposal are: Zero law of thermodynamics and the concept of temperature, calibration of thermometers and measurement of temperature for heating and cooling of three different substances under the same physical conditions. Finally the student is asked to make an application that involves measuring of temperature and other physical parameters. Some suggestions are: to determine the temperature at which we take some food, measure the temperature difference at different rooms of a house, housing constructions that favour optimal condition, measure the temperature of different regions, measure of temperature trough different colour filters, solar activity and UV, propose applications to understand current problems such as global warming, etc. It is concluded that the Arduino practices and electrical sensors increase the cultural horizon of the students while awaking their interest to understand their operation, basic physics and its application from a modern perspective.

Operations & Maintenance Best Practices - A Guide to Achieving Operational Efficiency Release 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This Operations and Maintenance (O&M) Best Practices Guide was developed under the direction of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). The mission of FEMP is to facilitate the Federal Government’s implementation of sound, cost effective energy management and investment practices to enhance the nation’s energy security and environmental stewardship.

21 CFR 4.4 - How can I comply with these current good manufacturing practice requirements for a co-packaged or...

Code of Federal Regulations, 2014 CFR

2014-04-01

... practice operating system in accordance with paragraph (b) of this section, the following requirements..., and the current good manufacturing practice operating system has been shown to comply with the drug... operating system has been shown to comply with the QS regulation, the following provisions of the drug CGMPs...

21 CFR 4.4 - How can I comply with these current good manufacturing practice requirements for a co-packaged or...

Code of Federal Regulations, 2013 CFR

2013-04-01

... practice operating system in accordance with paragraph (b) of this section, the following requirements..., and the current good manufacturing practice operating system has been shown to comply with the drug... operating system has been shown to comply with the QS regulation, the following provisions of the drug CGMPs...

Making the invisible visible--operating theatre nurses' perceptions of caring in perioperative practice.

PubMed

Blomberg, Ann-Catrin; Bisholt, Birgitta; Nilsson, Jan; Lindwall, Lillemor

2015-06-01

The aim of this study was to describe operating theatre nurses' (OTNs') perceptions of caring in perioperative practice. A qualitative descriptive design was performed. Data were collected with interviews were carried out with fifteen strategically selected operating theatre nurses from different operating theatres in the middle of Sweden. A phenomenographic analysis was used to analyse the interviews. The findings show that operating theatre nurses' perceptions of caring in perioperative practice can be summarised in one main category: To follow the patient all the way. Two descriptive categories emerged: To ensure continuity of patient care and keeping a watchful eye. The operating theatre nurses got to know the patient and as a result became responsible for the patient. They protected the patient's body and preserved patient dignity in perioperative practice. The findings show different aspects of caring in perioperative practice. OTNs wanted to be more involved in patient care and follow the patient throughout the perioperative nursing process. Although OTNs have the ambition to make the care in perioperative practice visible, there is today a medical technical approach which promotes OTNs continuing to offer care in secret. © 2014 Nordic College of Caring Science.

Research on best practices for winter weather operations.

DOT National Transportation Integrated Search

2012-10-01

There is a growing need to identify actionable practices relative to winter weather operations. Because of the : potential and inherent hazards during cold weather, it has become increasingly important to ensure that these : practices can be effectiv...

Value centric approaches to the design, operations and maintenance of wind turbines

NASA Astrophysics Data System (ADS)

Khadabadi, Madhur Aravind

Wind turbine maintenance is emerging as an unexpectedly high component of turbine operating cost, and there is an increasing interest in managing this cost. This thesis presents an alternative view of maintenance as a value-driver, and develops an optimization algorithm to evaluate the value delivered by different maintenance techniques. I view maintenance as an operation that moves the turbine to an improved state in which it can generate more power and, thus, earn more revenue. To implement this approach, I model the stochastic deterioration of the turbine in two dimensions: the deterioration rate, and the extent of deterioration, and then use maintenance to improve the state of the turbine. The value of the turbine is the difference between the revenue from to the power generation and the costs incurred in operation and maintenance. With a focus on blade deterioration, I evaluate the value delivered by implementing two different maintenance schemes, predictive maintenance and scheduled maintenance. An example of predictive maintenance technique is the use of Condition Monitoring Systems to precisely detect deterioration. I model Condition Monitoring System (CMS) of different degrees of fidelity, where a higher fidelity CMS would allow the blade state to be determined with a higher precision. The same model is then applied for the scheduled maintenance technique. The improved state information obtained from these techniques is then used to derive an optimal maintenance strategy. The difference between the value of the turbine with and without the inspection type can be interpreted as the value of the inspection. The results indicate that a higher fidelity (and more expensive) inspection method does not necessarily yield the highest value, and, that there is an optimal level of fidelity that results in maximum value. The results also aim to inform the operator of the impact of regional parameters such as wind speed, variance and maintenance costs to the optimal maintenance strategy. The contributions of this work are twofold. First, I present a practical approach to wind turbine valuation that takes operating and market conditions into account. This work should therefore be useful to wind farm operators, investors and decision makers. Second, I show how the value of a maintenance scheme can be explicitly assessed for different conditions.

NATO Guide for Judgement-Based Operational Analysis in Defence Decision Making (Guide OTAN pour l’analyse operationnelle basee sur le jugement dans la prise de decision de defense). Analyst-Oriented Volume: Code of Best Practice for Soft Operational Analysis

DTIC Science & Technology

2012-06-01

Military Operational Research , with special theme ‘The use of ‘soft’ methods in OR’. OR52 (7 – 9 September 2010, Royal Holloway University of London...on human judgement. Judgement-based OA applies the methods of ‘Soft Operational Research ’ developed in academia. It has appeared, however, that the...similarity between judgemental methods in operational research practice and a number of other modes of professional analytical practice. The closest

Evaluation of oxygen transfer rates in stirred-tank bioreactors for clinical manufacturing.

PubMed

Bellucci, Joseph J; Hamaker, Kent H

2011-01-01

Several methods are available for determining the volumetric oxygen transfer coefficient in bioreactors, though their application in industrial bioprocess has been limited. To be practically useful, mass transfer measurements made in nonfermenting systems must be consistent with observed microbial respiration rates. This report details a procedure for quantifying the relationship between agitation frequency and oxygen transfer rate that was applied in stirred-tank bioreactors used for clinical biologics manufacturing. The intrinsic delay in dissolved oxygen (DO) measurement was evaluated by shifting the bioreactor pressure and fitting a first-order mathematical model to the DO response. The dynamic method was coupled with the DO lag results to determine the oxygen transfer rate in Water for Injection (WFI) and a complete culture medium. A range of agitation frequencies was investigated at a fixed air sparge flow rate, replicating operating conditions used in Pichia pastoris fermentation. Oxygen transfer rates determined by this method were in excellent agreement with off-gas calculations from cultivation of the organism (P = 0.1). Fermentation of Escherichia coli at different operating parameters also produced respiration rates that agreed with the corresponding dynamic method results in WFI (P = 0.02). The consistency of the dynamic method results with the off-gas data suggests that compensation for the delay in DO measurement can be combined with dynamic gassing to provide a practical, viable model of bioreactor oxygen transfer under conditions of microbial fermentation. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

It's there if you look. Get value out of technology to improve operations.

PubMed

Nelson, Rosemarie

2003-01-01

Is your group missing out on practice-management system functions critical to efficient operations and reduced overhead? Most practices don't maximize the capabilities of their office systems, hampering operational efficiency.

Best Practices in Photovoltaic System Operations and Maintenance: 2nd Edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whaley, Cass

This best practices guide encourages high-quality system deployment and operation that improves lifetime project performance and energy production while reducing, or at least optimizing, costs to deliver an operation and maintenance program.

Ergonomics in industrialized dairy operations.

PubMed

Douphrate, David I; Nonnenmann, Matthew W; Rosecrance, John C

2009-01-01

This paper presents a summary of a panel presentation by agriculture health and safety scientists on ergonomics of industrialized dairy parlor operations in the United States. Dairy industry trends in the United States were discussed in the panel presentation, which took place during the New Paths: Health and Safety in Western Agriculture conference, November 11-13, 2008. Dairy production is steadily moving to large-herd operations because of associated economies of scale and other economic and social conditions. Large-herd operations utilize a parlor milking system, as compared to a stanchion system used primarily in smaller operations. Each milking system presents different risks for worker injury. Low back, knee, and shoulder musculoskeletal symptoms were most frequently reported among workers in smaller dairy operations. Another study analyzing workers' compensation (WC) data from large-herd milking operations found nearly 50% of livestock-handling injury claims involved parlor milking activities. Nearly 27% of injuries were to the wrist, hand, and fingers, nearly 13% to the head or face, and 11% to the chest. Results indicated the vulnerability of these body parts to injury due to the worker-livestock interface during milking. More focused research should investigate milking practices and parlor designs as they relate to worker safety and health. Additional dairy-related injury research is vital given the trend towards large industrial milking operations.

Pre-operative patient teaching in an acute care ward in Hong Kong: a case study.

PubMed

Lee, David S; Chien, W T

2002-10-01

Many nurses have acknowledged that adequate pre-operative teaching can alleviate patients' anxiety, increase patient participation in their own care, and minimize post-operative complications. However, the organization and degree to which pre-operative patient teachingfeatured in nurses' practice varies in different acute care settings. A case study design was used to explore the practice of pre-operative teaching in a surgical ward of an acute general hospital in Hong Kong. Seventeen registered nurses working on the ward were interviewed and observed in order to explore how they conduct a pre-operative teaching program and the difficulties encountered by them in carrying out pre-operative teaching on this acute care setting. Thefindings of this study indicate that pre-operative teaching workshops are organized and conducted by nursesfrom the operating theatre, in the day surgery center. Ward nurses were not actively involved in this pre-operative teaching. The results of this study present some similarities to a study with the similar design in Australia. There are also issues unique to the Hong Kong context. This case study was to review Hong Kong nurses' current practices of pre-operative teaching and to understand the cultural, conceptual and managementfactors influencing the practice in pre-operative teaching.

Operation of micro and molecular machines: a new concept with its origins in interface science.

PubMed

Ariga, Katsuhiko; Ishihara, Shinsuke; Izawa, Hironori; Xia, Hong; Hill, Jonathan P

2011-03-21

A landmark accomplishment of nanotechnology would be successful fabrication of ultrasmall machines that can work like tweezers, motors, or even computing devices. Now we must consider how operation of micro- and molecular machines might be implemented for a wide range of applications. If these machines function only under limited conditions and/or require specialized apparatus then they are useless for practical applications. Therefore, it is important to carefully consider the access of functionality of the molecular or nanoscale systems by conventional stimuli at the macroscopic level. In this perspective, we will outline the position of micro- and molecular machines in current science and technology. Most of these machines are operated by light irradiation, application of electrical or magnetic fields, chemical reactions, and thermal fluctuations, which cannot always be applied in remote machine operation. We also propose strategies for molecular machine operation using the most conventional of stimuli, that of macroscopic mechanical force, achieved through mechanical operation of molecular machines located at an air-water interface. The crucial roles of the characteristics of an interfacial environment, i.e. connection between macroscopic dimension and nanoscopic function, and contact of media with different dielectric natures, are also described.

Operational research in malawi: making a difference with cotrimoxazole preventive therapy in patients with tuberculosis and HIV

PubMed Central

2011-01-01

Background In Malawi, high case fatality rates in patients with tuberculosis, who were also co-infected with HIV, and high early death rates in people living with HIV during the initiation of antiretroviral treatment (ART) adversely impacted on treatment outcomes for the national tuberculosis and ART programmes respectively. This article i) discusses the operational research that was conducted in the country on cotrimoxazole preventive therapy, ii) outlines the steps that were taken to translate these findings into national policy and practice, iii) shows how the implementation of cotrimoxazole preventive therapy for both TB patients and HIV-infected patients starting ART was associated with reduced death rates, and iv) highlights lessons that can be learnt for other settings and interventions. Discussion District and facility-based operational research was undertaken between 1999 and 2005 to assess the effectiveness of cotrimoxazole preventive therapy in reducing death rates in TB patients and subsequently in patients starting ART under routine programme conditions. Studies demonstrated significant reductions in case fatality in HIV-infected TB patients receiving cotrimoxazole and in HIV-infected patients about to start ART. Following the completion of research, the findings were rapidly disseminated nationally at stakeholder meetings convened by the Ministry of Health and internationally through conferences and peer-reviewed scientific publications. The Ministry of Health made policy changes based on the available evidence, following which there was countrywide distribution of the updated policy and guidelines. Policy was rapidly moved to practice with the development of monitoring tools, drug procurement and training packages. National programme performance improved which showed a significant decrease in case fatality rates in TB patients as well as a reduction in early death in people with HIV starting ART. Summary Key lessons for moving this research endeavour through to policy and practice were the importance of placing operational research within the programme, defining relevant questions, obtaining "buy-in" from national programme staff at the beginning of projects and having key actors or "policy entrepreneurs" to push forward the policy-making process. Ultimately, any change in policy and practice has to benefit patients, and the ultimate judge of success is whether treatment outcomes improve or not. PMID:21794154

Student agreement regarding adequacy of didactic content and practical experiences of vaccination clinic business operations.

PubMed

George, David L; Johnson, Eric J; O'Neal, Katherine S; Smith, Michael J

2018-04-01

To report student perceived adequacy regarding didactic content and practical experiences of vaccination clinic business operations. Didactic content, a case study, and practical experiences regarding vaccination clinic business operations were implemented in related lectures of a Pharmacy Business and Entrepreneurship (PBE) elective and the college of pharmacy sponsored vaccination clinics. An online survey was used to evaluate student perceived adequacy of didactic content and practical experiences of vaccination clinic business operations. Mean scaled agreement was compared between students in the PBE elective versus those not in the elective. Student confidence in performing business operations was also assessed. Students in the PBE had higher mean confidence than non-elective students regarding staff management (3.23 vs. 2.73, p = 0.04). Success of the interventions may be attributed to students in the PBE elective that reported a higher mean perceived adequacy of content and practical experiences and confidence in performing nearly all business operations. Still, further evaluation of interventions is being considered to assess effectiveness of learning. Published by Elsevier Inc.

Magnetic heat pumping near room temperature

NASA Technical Reports Server (NTRS)

Brown, G. V.

1976-01-01

It is shown that magnetic heat pumping can be made practical at room temperature by using a ferromagnetic material with a Curie point at or near operating temperature and an appropriate regenerative thermodynamic cycle. Measurements are performed which show that gadolinium is a resonable working material and it is found that the application of a 7-T magnetic field to gadolinium at the Curie point (293 K) causes a heat release of 4 kJ/kg under isothermal conditions or a temperature rise of 14 K under adiabatic conditions. A regeneration technique can be used to lift the load of the lattice and electronic heat capacities off the magnetic system in order to span a reasonable temperature difference and to pump as much entropy per cycle as possible

Quantum Transduction with Adaptive Control

NASA Astrophysics Data System (ADS)

Zhang, Mengzhen; Zou, Chang-Ling; Jiang, Liang

2018-01-01

Quantum transducers play a crucial role in hybrid quantum networks. A good quantum transducer can faithfully convert quantum signals from one mode to another with minimum decoherence. Most investigations of quantum transduction are based on the protocol of direct mode conversion. However, the direct protocol requires the matching condition, which in practice is not always feasible. Here we propose an adaptive protocol for quantum transducers, which can convert quantum signals without requiring the matching condition. The adaptive protocol only consists of Gaussian operations, feasible in various physical platforms. Moreover, we show that the adaptive protocol can be robust against imperfections associated with finite squeezing, thermal noise, and homodyne detection, and it can be implemented to realize quantum state transfer between microwave and optical modes.

Quantum Transduction with Adaptive Control.

PubMed

Zhang, Mengzhen; Zou, Chang-Ling; Jiang, Liang

2018-01-12

Quantum transducers play a crucial role in hybrid quantum networks. A good quantum transducer can faithfully convert quantum signals from one mode to another with minimum decoherence. Most investigations of quantum transduction are based on the protocol of direct mode conversion. However, the direct protocol requires the matching condition, which in practice is not always feasible. Here we propose an adaptive protocol for quantum transducers, which can convert quantum signals without requiring the matching condition. The adaptive protocol only consists of Gaussian operations, feasible in various physical platforms. Moreover, we show that the adaptive protocol can be robust against imperfections associated with finite squeezing, thermal noise, and homodyne detection, and it can be implemented to realize quantum state transfer between microwave and optical modes.

Practical small-scale explosive seam welding

NASA Technical Reports Server (NTRS)

Bement, L. J.

1983-01-01

A small-scale explosive seam welding process has been developed that can significantly contribute to remote metal joining operations under hazardous or inaccessible conditions, such as nuclear reactor repair and assembly of structure in space. This paper describes this explosive seam welding process in terms of joining principles, variables, types of joints created, capabilities, and applications. Very small quantities of explosive in a ribbon configuration are used to create narrow (less than 0.5 inch), long-length, uniform, hermetically sealed joints that exhibit parent metal properties in a wide variety of metals, alloys, and combinations. The practicality of this process has been demonstrated by its current acceptance, as well as its capabilities that are superior in many applications to the universally accepted joining processes, such as mechanical fasteners, fusion and resistance welding, and adhesives.

40 CFR 60.634 - Alternative means of emission limitation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... any design, equipment, work practice or operational standard, the Administrator will publish, in the... the design, equipment, work practice or operational standard. ... applications under this section from either owners or operators of affected facilities, or manufacturers of...

The impact of high-risk drivers and benefits of limiting their driving degree of freedom.

PubMed

Habtemichael, Filmon G; de Picado-Santos, Luis

2013-11-01

The perception of drivers regarding risk-taking behaviour is widely varied. High-risk drivers are the segment of drivers who are disproportionately represented in the majority of crashes. This study examines the typologies of drivers in risk-taking behaviour, the common high-risk driving errors (speeding, close following, abrupt lane-changing and impaired driving), their safety consequences and the technological (ITS) devices for their detection and correction. Limiting the driving degree of freedom of high-risk drivers is proposed and its benefits on safety as well as traffic operations are quantified using VISSIM microscopic traffic simulation at various proportions of high-risk drivers; namely, 4%, 8% and 12%. Assessment of the safety benefits was carried out by using the technique of simulated vehicle conflicts which was validated against historic crashes, and reduction in travel time was used to quantify the operational benefits. The findings imply that limiting the freedom of high-risk drivers resulted in a reduction of crashes by 12%, 21% and 27% in congested traffic conditions; 9%, 13% and 18% in lightly congested traffic conditions as well as 9%, 10% and 17% in non-congested traffic conditions for high-risk drivers in proportions of 4%, 8% and 12% respectively. Moreover, the surrogate safety measures indicated that there was a reduction in crash severity levels. The operational benefits amounted to savings of nearly 1% in travel time for all the proportions of high-risk drivers considered. The study concluded that limiting the freedom of high-risk drivers has safety and operational benefits; though there could be social, legal and institutional concerns for its practical implementation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation of a training program for device operators in the Australian Government's Point of Care Testing in General Practice Trial: issues and implications for rural and remote practices.

PubMed

Shephard, Mark D; Mazzachi, Beryl C; Watkinson, Les; Shephard, Anne K; Laurence, Caroline; Gialamas, Angela; Bubner, Tanya

2009-01-01

From September 2005 to February 2007 the Australian Government funded the Point of Care Testing (PoCT) in General Practice Trial, a multi-centre, cluster randomised controlled trial to determine the safety, clinical effectiveness, cost-effectiveness and satisfaction of PoCT in General Practice. In total, 53 practices (23 control and 30 intervention) based in urban, rural or remote locations across three states (South Australia [SA], New South Wales [NSW] and Victoria [VIC]) participated in the Trial. Control practices had pathology testing performed by their local laboratory, while intervention practices conducted pathology testing by PoCT. In total, 4968 patients (1958 control and 3010 intervention) participated in the Trial. The point-of-care (PoC) tests performed by intervention practices were: haemoglobin A1c (HbA1c) and urine albumin:creatinine ratio (ACR) on patients with diabetes, total cholesterol, triglyceride and high density lipoprotein (HDL) cholesterol on patients with hyperlipidaemia, and international normalised ratio (INR) on patients on anticoagulant therapy. Three PoCT devices measured these tests: the Siemens DCA 2000 (Siemens HealthCare Diagnostics, Melbourne, VIC, Australia) for HbA1c and urine ACR; Point of Care Diagnostics Cholestech LDX analyser (Point of Care Diagnostics; Sydney, NSW, Australia) for lipids; and the Roche CoaguChek S (Roche Diagnostics; Sydney, NSW, Australia) for INR. Point-of-care testing in the General Practice Trial was underpinned by a quality management framework which included an on-going training and competency program for PoCT device operators. This article describes the design, implementation and results of the training and competency program. An education and training resource package was developed for the Trial consisting of a training manual, a set of A3 laminated posters and a CD ROM. Five initial training workshops were held for intervention practices from each geographic region between August and October 2005 at three centres - Adelaide (SA), Bendigo (VIC) and Dubbo (NSW). These workshops combined theoretical training in the principles and practice of PoCT with 'hands on' practical training delivered in interactive small group sessions. At the completion of training, practice staff undertook a written and practical competency assessment and received a certificate of competency as a qualified device operator. Following each initial training workshop, practice staff completed a short satisfaction survey. Five refresher training workshops covering all geographic regions were delivered during late August 2006, coinciding with the 12 month point of the live phase of the Trial. At the completion of the Trial in February 2007, device operators completed a further questionnaire. Sixty device operators from 31 practices completed training and competency assessment as part of the Initial Training Workshop series. A further 20 device operators from 12 of the practices were trained in the 12 month period after the initial workshops; 19 of these staff were from rural or remote practices. In total 80 device operators comprising 74 practice staff and six GPs from 31 practices were trained and received competency certificates as part of Trial. In all, 19 device operators left the Trial either through personal resignation from an existing practice or because their practice withdrew from the Trial; the majority (84%) were from rural and remote practices. A total of 42 device operators from 25 practices attended refresher training in the second half of 2006. Results from the satisfaction questionnaire completed by device operators following the initial training workshops showed there was unanimous agreement that the posters were useful for the conduct of daily PoCT and practical training in small groups was satisfactory as a training method. The quality and appropriateness of the PoCT training resources and the workshop overall was rated as either good or excellent by all respondents (100% and 78%, respectively). The responses by device operators to the post-Trial satisfaction questionnaire found a high level of satisfaction with PoCT across all geographic regions. Device operators from remote practices had the highest satisfaction levels for quality of training, usefulness of the training manual, ease of use of devices, confidence in the accuracy of PoCT results and preference for PoCT over laboratory testing. The usefulness of the posters for conducting PoCT achieved the highest satisfaction rating among operators from all three geographic regions. However the highest staff turnover rates and the highest number of requests for training of additional staff were from rural and remote practices. The methods established for the implementation and delivery of training and competency assessment for the PoCT in General Practice Trial were appropriate and effective. Results of the evaluation showed rural and remote practices have a greater need for training and support compared to their urban counterparts and may require more flexible training options to cater for much higher rates of staff turnover.

Practice-Based Evidence in Community Guide Systematic Reviews.

PubMed

Vaidya, Namita; Thota, Anilkrishna B; Proia, Krista K; Jamieson, Sara; Mercer, Shawna L; Elder, Randy W; Yoon, Paula; Kaufmann, Rachel; Zaza, Stephanie

2017-03-01

To assess the relative contributions and quality of practice-based evidence (PBE) and research-based evidence (RBE) in The Guide to Community Preventive Services (The Community Guide). We developed operational definitions for PBE and RBE in which the main distinguishing feature was whether allocation of participants to intervention and comparison conditions was under the control of researchers (RBE) or not (PBE). We conceptualized a continuum between RBE and PBE. We then categorized 3656 studies in 202 reviews completed since The Community Guide began in 1996. Fifty-four percent of studies were PBE and 46% RBE. Community-based and policy reviews had more PBE. Health care system and programmatic reviews had more RBE. The majority of both PBE and RBE studies were of high quality according to Community Guide scoring methods. The inclusion of substantial PBE in Community Guide reviews suggests that evidence of adequate rigor to inform practice is being produced. This should increase stakeholders' confidence that The Community Guide provides recommendations with real-world relevance. Limitations in some PBE studies suggest a need for strengthening practice-relevant designs and external validity reporting standards.

PCPA: A Practical Certificateless Conditional Privacy Preserving Authentication Scheme for Vehicular Ad Hoc Networks

PubMed Central

2018-01-01

Vehicle ad hoc networks (VANETs) is a promising network scenario for greatly improving traffic efficiency and safety, in which smart vehicles can communicate with other vehicles or roadside units. For the availability of VANETs, it is very important to deal with the security and privacy problems for VANETs. In this paper, based on certificateless cryptography and elliptic curve cryptography, we present a certificateless signature with message recovery (CLS-MR), which we believe are of independent interest. Then, a practical certificateless conditional privacy preserving authentication (PCPA) scheme is proposed by incorporating the proposed CLS-MR scheme. Furthermore, the security analysis shows that PCPA satisfies all security and privacy requirements. The evaluation results indicate that PCPA achieves low computation and communication costs because there is no need to use the bilinear pairing and map-to-point hash operations. Moreover, extensive simulations show that PCPA is feasible and achieves prominent performances in terms of message delay and message loss ratio, and thus is more suitable for the deployment and adoption of VANETs. PMID:29762511

Construction safety program for the National Ignition Facility, July 30, 1999 (NIF-0001374-OC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benjamin, D W

1999-07-30

These rules apply to all LLNL employees, non-LLNL employees (including contract labor, supplemental labor, vendors, personnel matrixed/assigned from other National Laboratories, participating guests, visitors and students) and contractors/subcontractors. The General Rules-Code of Safe Practices shall be used by management to promote accident prevention through indoctrination, safety and health training and on-the-job application. As a condition for contracts award, all contractors and subcontractors and their employees must certify on Form S and H A-l that they have read and understand, or have been briefed and understand, the National Ignition Facility OCIP Project General Rules-Code of Safe Practices. (An interpreter must briefmore » those employees who do not speak or read English fluently.) In addition, all contractors and subcontractors shall adopt a written General Rules-Code of Safe Practices that relates to their operations. The General Rules-Code of Safe Practices must be posted at a conspicuous location at the job site office or be provided to each supervisory employee who shall have it readily available. Copies of the General Rules-Code of Safe Practices can also be included in employee safety pamphlets.« less

47 CFR 76.1001 - Unfair practices generally.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Competitive Access to Cable Programming § 76.1001 Unfair practices generally. (a) Unfair practices generally. No cable operator, satellite cable programming vendor in which a cable operator has an attributable interest, or satellite broadcast programming vendor...

7 CFR 205.240 - Pasture practice standard.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.240 Pasture practice standard. The producer of an organic livestock operation must, for all ruminant livestock on the operation...

7 CFR 205.240 - Pasture practice standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.240 Pasture practice standard. The producer of an organic livestock operation must, for all ruminant livestock on the operation...

7 CFR 205.240 - Pasture practice standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.240 Pasture practice standard. The producer of an organic livestock operation must, for all ruminant livestock on the operation...

7 CFR 205.240 - Pasture practice standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic Production and Handling Requirements § 205.240 Pasture practice standard. The producer of an organic livestock operation must, for all ruminant livestock on the operation...

47 CFR 76.1001 - Unfair practices generally.

Code of Federal Regulations, 2011 CFR

2011-10-01

... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Competitive Access to Cable Programming § 76.1001 Unfair practices generally. (a) Unfair practices generally. No cable operator, satellite cable programming vendor in which a cable operator has an attributable interest, or satellite broadcast programming vendor...

Thermal-hydraulic performance of metal foam heat exchangers under dry operating conditions

DOE PAGES

Nawaz, Kashif; Bock, Jessica; Jacobi, Anthony M.

2017-03-14

High porosity metal foams with novel thermal, mechanical, electrical, and acoustic properties are being more widely adopted for application. Due to their large surface-area-to-volume ratio and complex structure which induces better fluid mixing, boundary layer restarting and wake destruction, they hold promise for heat transfer applications. In this study, the thermal-hydraulic performance of open-cell aluminum metal foam heat exchanger has been evaluated. The impact of flow conditions and metal foam geometry on the heat transfer coefficient and gradient have been investigated. Metal foam heat exchanger with same geometry (face area, flow depth and fin dimensions) consisting of four different typemore » of metal foams have been built for the study. Experiments are conducted in a closed-loop wind tunnel at different flow rate under dry operating condition. Metal foams with a smaller pore size (40 PPI) have a larger heat transfer coefficient compared to foams with a larger pore size (5 PPI). However, foams with larger pores result in relatively smaller pressure gradients. Current thermal-hydraulic modeling practices have been reviewed and potential issues have been identified. Permeability and inertia coefficients are determined and compared to data reported in open literature. Finally, on the basis of the new experimental results, correlations are developed relating the foam characteristics and flow conditions through the friction factor f and the Colburn j factor.« less

Thermal-hydraulic performance of metal foam heat exchangers under dry operating conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nawaz, Kashif; Bock, Jessica; Jacobi, Anthony M.

High porosity metal foams with novel thermal, mechanical, electrical, and acoustic properties are being more widely adopted for application. Due to their large surface-area-to-volume ratio and complex structure which induces better fluid mixing, boundary layer restarting and wake destruction, they hold promise for heat transfer applications. In this study, the thermal-hydraulic performance of open-cell aluminum metal foam heat exchanger has been evaluated. The impact of flow conditions and metal foam geometry on the heat transfer coefficient and gradient have been investigated. Metal foam heat exchanger with same geometry (face area, flow depth and fin dimensions) consisting of four different typemore » of metal foams have been built for the study. Experiments are conducted in a closed-loop wind tunnel at different flow rate under dry operating condition. Metal foams with a smaller pore size (40 PPI) have a larger heat transfer coefficient compared to foams with a larger pore size (5 PPI). However, foams with larger pores result in relatively smaller pressure gradients. Current thermal-hydraulic modeling practices have been reviewed and potential issues have been identified. Permeability and inertia coefficients are determined and compared to data reported in open literature. Finally, on the basis of the new experimental results, correlations are developed relating the foam characteristics and flow conditions through the friction factor f and the Colburn j factor.« less

Time to pay attention: attentional performance time-stamped prefrontal cholinergic activation, diurnality and performance

PubMed Central

Paolone, Giovanna; Lee, Theresa M.; Sarter, Martin

2012-01-01

Although the impairments in cognitive performance that result from shifting or disrupting daily rhythms have been demonstrated, the neuronal mechanisms that optimize fixed time daily performance are poorly understood. We previously demonstrated that daily practice of a sustained attention task (SAT) evokes a diurnal activity pattern in rats. Here we report that SAT practice at a fixed time produced practice time-stamped increases in prefrontal cholinergic neurotransmission that persisted after SAT practice was terminated and in a different environment. SAT time-stamped cholinergic activation occurred irrespective of whether the SAT was practiced during the light or dark phase or in constant light conditions. In contrast, prior daily practice of an operant schedule of reinforcement, albeit generating more rewards and lever presses per session than the SAT, neither activated the cholinergic system nor affected the animals' nocturnal activity pattern. Likewise, food-restricted animals exhibited strong food anticipatory activity (FAA) and attenuated activity during the dark period but FAA was not associated with increases in prefrontal cholinergic activity. Removal of cholinergic neurons impaired SAT performance and facilitated the reemergence of nocturnality. Shifting SAT practice away from a fixed time resulted in significantly lower performance. In conclusion, these experiments demonstrated that fixed time, daily practice of a task assessing attention generates a precisely practice time-stamped activation of the cortical cholinergic input system. Time-stamped cholinergic activation benefits fixed time performance and, if practiced during the light phase, contributes to a diurnal activity pattern. PMID:22933795

Time to pay attention: attentional performance time-stamped prefrontal cholinergic activation, diurnality, and performance.

PubMed

Paolone, Giovanna; Lee, Theresa M; Sarter, Martin

2012-08-29

Although the impairments in cognitive performance that result from shifting or disrupting daily rhythms have been demonstrated, the neuronal mechanisms that optimize fixed-time daily performance are poorly understood. We previously demonstrated that daily practice of a sustained attention task (SAT) evokes a diurnal activity pattern in rats. Here, we report that SAT practice at a fixed time produced practice time-stamped increases in prefrontal cholinergic neurotransmission that persisted after SAT practice was terminated and in a different environment. SAT time-stamped cholinergic activation occurred regardless of whether the SAT was practiced during the light or dark phase or in constant-light conditions. In contrast, prior daily practice of an operant schedule of reinforcement, albeit generating more rewards and lever presses per session than the SAT, neither activated the cholinergic system nor affected the animals' nocturnal activity pattern. Likewise, food-restricted animals exhibited strong food anticipatory activity (FAA) and attenuated activity during the dark phase but FAA was not associated with increases in prefrontal cholinergic activity. Removal of cholinergic neurons impaired SAT performance and facilitated the reemergence of nocturnality. Shifting SAT practice away from a fixed time resulted in significantly lower performance. In conclusion, these experiments demonstrated that fixed-time, daily practice of a task assessing attention generates a precisely practice time-stamped activation of the cortical cholinergic input system. Time-stamped cholinergic activation benefits fixed-time performance and, if practiced during the light phase, contributes to a diurnal activity pattern.

Applications of Low Altitude Remote Sensing in Agriculture upon Farmers' Requests– A Case Study in Northeastern Ontario, Canada

PubMed Central

Zhang, Chunhua; Walters, Dan; Kovacs, John M.

2014-01-01

With the growth of the low altitude remote sensing (LARS) industry in recent years, their practical application in precision agriculture seems all the more possible. However, only a few scientists have reported using LARS to monitor crop conditions. Moreover, there have been concerns regarding the feasibility of such systems for producers given the issues related to the post-processing of images, technical expertise, and timely delivery of information. The purpose of this study is to showcase actual requests by farmers to monitor crop conditions in their fields using an unmanned aerial vehicle (UAV). Working in collaboration with farmers in northeastern Ontario, we use optical and near-infrared imagery to monitor fertilizer trials, conduct crop scouting and map field tile drainage. We demonstrate that LARS imagery has many practical applications. However, several obstacles remain, including the costs associated with both the LARS system and the image processing software, the extent of professional training required to operate the LARS and to process the imagery, and the influence from local weather conditions (e.g. clouds, wind) on image acquisition all need to be considered. Consequently, at present a feasible solution for producers might be the use of LARS service provided by private consultants or in collaboration with LARS scientific research teams. PMID:25386696

Applications of low altitude remote sensing in agriculture upon farmers' requests--a case study in northeastern Ontario, Canada.

PubMed

Zhang, Chunhua; Walters, Dan; Kovacs, John M

2014-01-01

With the growth of the low altitude remote sensing (LARS) industry in recent years, their practical application in precision agriculture seems all the more possible. However, only a few scientists have reported using LARS to monitor crop conditions. Moreover, there have been concerns regarding the feasibility of such systems for producers given the issues related to the post-processing of images, technical expertise, and timely delivery of information. The purpose of this study is to showcase actual requests by farmers to monitor crop conditions in their fields using an unmanned aerial vehicle (UAV). Working in collaboration with farmers in northeastern Ontario, we use optical and near-infrared imagery to monitor fertilizer trials, conduct crop scouting and map field tile drainage. We demonstrate that LARS imagery has many practical applications. However, several obstacles remain, including the costs associated with both the LARS system and the image processing software, the extent of professional training required to operate the LARS and to process the imagery, and the influence from local weather conditions (e.g. clouds, wind) on image acquisition all need to be considered. Consequently, at present a feasible solution for producers might be the use of LARS service provided by private consultants or in collaboration with LARS scientific research teams.

How much tumor surgery do early-career orthopaedic oncologists perform?

PubMed

Miller, Benjamin J; Rajani, Rajiv; Leddy, Lee; Carmody Soni, Emily E; White, Jeremy R

2015-02-01

There are few data on the types of procedures orthopaedic oncologists perform in their first years of practice. Because fellowships are graduating fellows each year and the number of tumor patients is limited, defining the practice patterns of early-career orthopaedic oncologists may help diminish early employment discontent and enhance workforce discussions. The aim of the study was to use the objective case log volumes of a cross-section of early career orthopaedic oncologists to describe (1) the number of operations performed annually; (2) the proportion of tumor, trauma, adult reconstruction, and other operations for individual participants, (3) individual practice characteristics that were associated with the number of tumor procedures; and (4) the sources of satisfaction and challenges in each individual's career and surgical practice. Fifteen fellowship-trained orthopaedic oncologists out of a potential pool of 33 (45%) in their first 4 years of practice responded to a survey by submitting complete operative case lists for a 2-year period. We recorded the type of procedure and determined associations between the annual number of tumor operations and total operative caseload, years in practice, and some details of individual practice patterns. Each participant completed a survey regarding practice-related sources of stress and satisfaction. A total of 5611 surgical cases were available for review. For the entire cohort, there were 3303 (59%) tumor procedures, 973 (17%) trauma, 890 (16%) adult reconstruction, and 445 (8%) other. The median annual number of total operations was 214 (range, 63-356) and median annual number of tumor operations was 135 (range, 47-216). The median proportion of tumor operations in an individual practice was 56% (range, 43%-94%). The annual number of tumor operations correlated with the total annual number of operations (r = 0.73, p < 0.001). Sources of stress and satisfaction were similar to the general membership of the Musculoskeletal Tumor Society (MSTS), apart from more early-career surgeons regarding case volume as important (29 of 104 [28%] of MSTS versus 11 of 15 [73%] of early-career, p < 0.001). The typical early-career orthopaedic tumor surgeon had fewer than 60% of his or her operative procedures directly related to the subject of his or her fellowship training in orthopaedic oncology. Overall, the challenges and rewards of clinical practice are similar to oncologic surgeons later in their career. This study is a first step in assessing early practice characteristics and may be of value to the prospective orthopaedic oncologist, fellowship educators, and the society in workforce discussions. Early-career practice patterns have not been previously presented, to our knowledge, for any subspecialty of orthopaedic surgery, and we hope that this study will stimulate similar efforts throughout the field. Level IV, economic and decision analyses. See Guidelines for Authors for a complete description of levels of evidence.

Guide to good practices for operations and administration updates through required reading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-01

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480. 19, Conduct of Operations Requirements for DOE Facilities.'' (JDB)

Guide to good practices for operations and administration updates through required reading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-01

The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed to enhance the guidelines set forth in DOE Order 5480. 19, ``Conduct of Operations Requirements for DOE Facilities.`` (JDB)

Modeling and Simulation of HVAC Faulty Operations and Performance Degradation due to Maintenance Issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Liping; Hong, Tianzhen

Almost half of the total energy used in the U.S. buildings is consumed by heating, ventilation and air conditionings (HVAC) according to EIA statistics. Among various driving factors to energy performance of building, operations and maintenance play a significant role. Many researches have been done to look at design efficiencies and operational controls for improving energy performance of buildings, but very few study the impacts of HVAC systems maintenance. Different practices of HVAC system maintenance can result in substantial differences in building energy use. If a piece of HVAC equipment is not well maintained, its performance will degrade. If sensorsmore » used for control purpose are not calibrated, not only building energy usage could be dramatically increased, but also mechanical systems may not be able to satisfy indoor thermal comfort. Properly maintained HVAC systems can operate efficiently, improve occupant comfort, and prolong equipment service life. In the paper, maintenance practices for HVAC systems are presented based on literature reviews and discussions with HVAC engineers, building operators, facility managers, and commissioning agents. We categorize the maintenance practices into three levels depending on the maintenance effort and coverage: 1) proactive, performance-monitored maintenance; 2) preventive, scheduled maintenance; and 3) reactive, unplanned or no maintenance. A sampled list of maintenance issues, including cooling tower fouling, boiler/chiller fouling, refrigerant over or under charge, temperature sensor offset, outdoor air damper leakage, outdoor air screen blockage, outdoor air damper stuck at fully open position, and dirty filters are investigated in this study using field survey data and detailed simulation models. The energy impacts of both individual maintenance issue and combined scenarios for an office building with central VAV systems and central plant were evaluated by EnergyPlus simulations using three approaches: 1) direct modeling with EnergyPlus, 2) using the energy management system feature of EnergyPlus, and 3) modifying EnergyPlus source code. The results demonstrated the importance of maintenance for HVAC systems on energy performance of buildings. The research is intended to provide a guideline to help practitioners and building operators to gain the knowledge of maintaining HVAC systems in efficient operations, and prioritize HVAC maintenance work plan. The paper also discusses challenges of modeling building maintenance issues using energy simulation programs.« less

Embedded Volttron specification - benchmarking small footprint compute device for Volttron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanyal, Jibonananda; Fugate, David L.; Woodworth, Ken

An embedded system is a small footprint computing unit that typically serves a specific purpose closely associated with measurements and control of hardware devices. These units are designed for reasonable durability and operations in a wide range of operating conditions. Some embedded systems support real-time operations and can demonstrate high levels of reliability. Many have failsafe mechanisms built to handle graceful shutdown of the device in exception conditions. The available memory, processing power, and network connectivity of these devices are limited due to the nature of their specific-purpose design and intended application. Industry practice is to carefully design the softwaremore » for the available hardware capability to suit desired deployment needs. Volttron is an open source agent development and deployment platform designed to enable researchers to interact with devices and appliances without having to write drivers themselves. Hosting Volttron on small footprint embeddable devices enables its demonstration for embedded use. This report details the steps required and the experience in setting up and running Volttron applications on three small footprint devices: the Intel Next Unit of Computing (NUC), the Raspberry Pi 2, and the BeagleBone Black. In addition, the report also details preliminary investigation of the execution performance of Volttron on these devices.« less

Alternative Fuels Data Center

Science.gov Websites

technologies and operational practices which increase fuel efficiency and reduce emissions from goods movement . EPA provides partners with performance benchmarking tools, fleet management best practices, technology is working with partners to test and verify advanced technologies and operational practices that save

A strategic planning approach for operational-environmental tradeoff assessments in terminal areas

NASA Astrophysics Data System (ADS)

Jimenez, Hernando

This thesis proposes the use of well established statistical analysis techniques, leveraging on recent developments in interactive data visualization capabilities, to quantitatively characterize the interactions, sensitivities, and tradeoffs prevalent in the complex behavior of airport operational and environmental performance. Within the strategic airport planning process, this approach is used in the assessment of airport performance under current/reference conditions, as well as in the evaluation of terminal area solutions under projected demand conditions. More specifically, customized designs of experiments are utilized to guide the intelligent selection and definition of modeling and simulation runs that will yield greater understanding, insight, and information about the inherent systemic complexity of a terminal area, with minimal computational expense. For the research documented in this thesis, a modeling and simulation environment was created featuring three primary components. First, a generator of schedules of operations, based primarily on previous work on aviation demand characterization, whereby growth factors and scheduling adjustment algorithms are applied on appropriate baseline schedules so as to generate notional operational sets representative of consistent future demand conditions. The second component pertains to the modeling and simulation of aircraft operations, defined by a schedule of operations, on the airport surface and within its terminal airspace. This component is a discrete event simulator for multiple queuing models that captures the operational architecture of the entire terminal area along with all the necessary operational logic pertaining to simulated Air Traffic Control (ATC) functions, rules, and standard practices. The third and final component is comprised of legacy aircraft performance, emissions and dispersion, and noise exposure modeling tools, that use the simulation history of aircraft movements to generate estimates of fuel burn, emissions, and noise. The implementation of the proposed approach for the assessment of terminal area solutions incorporates the use of discrete response surface equations, and eliminates the use of quadratic terms that have no practical significance in this context. Rather, attention is entire placed on the main effects of different terminal area solutions, namely additional airport infrastructure, operational improvements, and advanced aircraft concepts, modeled as discrete independent variables for the regression model. Results reveal that an additional runway and a new international terminal, as well as reduced aircraft separation, have a major effect on all operational metrics of interest. In particular, the additional runway has a dominant effect for departure delay metrics and gate hold periods, with moderate interactions with respect to separation reduction. On the other hand, operational metrics for arrivals are co-dependent on additional infrastructure and separation reduction, featuring marginal improvements whenever these two solutions are implemented in isolation, but featuring a dramatic compounding effect when implemented in combination. The magnitude of these main effects for departures and of the interaction between these solutions for arrivals is confirmed through appropriate statistical significance testing. Finally, the inclusion o advanced aircraft concepts is shown to be most beneficial for airborne arrival operations and to a lesser extent for arrival ground movements. More specifically, advanced aircraft concepts were found to be primarily responsible for reductions in volatile organic compounds, unburned hydrocarbons, and particulate matter in this flight regime, but featured relevant interactions with separation reduction and additional airport infrastructure. To address the selection of scenarios for strategic airport planning, a technique for risk-based scenario construction, evaluation, and selection is proposed, incorporating n-dimensional dependence tree probability approximations into a morphological analysis approach. This approach to scenario construction and downselection is a distinct and novel contribution to the scenario planning field as it provides a mathematically and explicitly testable definition for an H parameter, contrasting with the qualitative alternatives in the current state of the art, which can be used in morphological analysis for scenario construction and downselection. By demonstrating that dependence tree probability product approximations are an adequate aggregation function, probability can be used for scenario construction and downselection without any mathematical or methodological restriction on the resolution of the probability scale or the number of morphological alternatives that have previously plagued probabilization and scenario downselection approaches. In addition, this approach requires expert input elicitation that is comparable or less than the current state of the art practices. (Abstract shortened by UMI.)

Standardisation of neonatal clinical practice.

PubMed

Bhutta, Z A; Giuliani, F; Haroon, A; Knight, H E; Albernaz, E; Batra, M; Bhat, B; Bertino, E; McCormick, K; Ochieng, R; Rajan, V; Ruyan, P; Cheikh Ismail, L; Paul, V

2013-09-01

The International Fetal and Newborn Growth Consortium for the 21(st) Century (INTERGROWTH-21(st) ) is a large-scale, population-based, multicentre project involving health institutions from eight geographically diverse countries, which aims to assess fetal, newborn and preterm growth under optimal conditions. Given the multicentre nature of the project and the expected number of preterm births, it is vital that all centres follow the same standardised clinical care protocols to assess and manage preterm infants, so as to ensure maximum validity of the resulting standards as indicators of growth and nutrition with minimal confounding. Moreover, it is well known that evidence-based clinical practice guidelines can reduce the delivery of inappropriate care and support the introduction of new knowledge into clinical practice. The INTERGROWTH-21(st) Neonatal Group produced an operations manual, which reflects the consensus reached by members of the group regarding standardised definitions of neonatal morbidities and the minimum standards of care to be provided by all centres taking part in the project. The operational definitions and summary management protocols were developed by consensus through a Delphi process based on systematic reviews of relevant guidelines and management protocols by authoritative bodies. This paper describes the process of developing the Basic Neonatal Care Manual, as well as the morbidity definitions and standardised neonatal care protocols applied across all the INTERGROWTH-21(st) participating centres. Finally, thoughts about implementation strategies are presented. © 2013 Royal College of Obstetricians and Gynaecologists.

NASA crop calendars: Wheat, barley, oats, rye, sorghum, soybeans, corn

NASA Technical Reports Server (NTRS)

Stuckey, M. R.; Anderson, E. N.

1975-01-01

Crop calenders used to determine when Earth Resources Technology Satellite ERTS data would provide the most accurate wheat acreage information and to minimize the amount of ground verified information needed are presented. Since barley, oats, and rye are considered 'confusion crops, i.e., hard to differentiate from wheat in ERTS imagery, specific dates are estimated for these crops in the following stages of development: (1) seed-bed operation, (2) planting or seeding, (3) intermediate growth, (4) dormancy, (5) development of crop to full ground cover, (6) heading or tasseling, and flowering, (7) harvesting, and (8) posting-harvest operations. Dormancy dates are included for fall-snow crops. A synopsis is given of each states' growing conditions, special cropping practices, and other characteristics which are helpful in identifying crops from ERTS imagery.

A Step Towards CO2-Neutral Aviation

NASA Technical Reports Server (NTRS)

Brankovic, Andreja; Ryder, Robert C.; Hendricks, Robert C.; Huber, Marcia L.

2007-01-01

An approximation method for evaluation of the caloric equations used in combustion chemistry simulations is described. The method is applied to generate the equations of specific heat, static enthalpy, and Gibb's free energy for fuel mixtures of interest to gas turbine engine manufacturers. Liquid-phase fuel properties are also derived. The fuels include JP-8, synthetic fuel, and two fuel blends consisting of a mixture of JP-8 and synthetic fuel. The complete set of fuel property equations for both phases are implemented into a computational fluid dynamics (CFD) flow solver database, and multi-phase, reacting flow simulations of a well-tested liquid-fueled combustor are performed. The simulations are a first step in understanding combustion system performance and operational issues when using alternate fuels, at practical engine operating conditions.

Differentiation of subsequent memory effects between retrieval practice and elaborative study.

PubMed

Liu, Yi; Rosburg, Timm; Gao, Chuanji; Weber, Christine; Guo, Chunyan

2017-07-01

Retrieval practice enhances memory retention more than re-studying. The underlying mechanisms of this retrieval practice effect have remained widely unclear. According to the elaborative retrieval hypothesis, activation of elaborative information occurs to a larger extent during testing than re-studying. In contrast, the episodic context account has suggested that recollecting prior episodic information (especially the temporal context) contributes to memory retention. To adjudicate the distinction between these two accounts, the present study used the classical retrieval practice effect paradigm to compare retrieval practice and elaborative study. In an initial behavioral experiment, retrieval practice produced greater retention than elaboration and re-studying in a one-week delayed test. In a subsequent event-related potential (ERP) experiment, retrieval practice resulted in reliably superior accuracy in the delayed test compared to elaborative study. In the ERPs, a frontally distributed subsequent memory effect (SME), starting at 300ms, occurred in the elaborative study condition, but not in the retrieval practice condition. A parietal SME emerged in the retrieval practice condition from 500 to 700ms, but was absent in the elaborative study condition. After 700ms, a late SME was present in the retrieval practice condition, but not in the elaborative study condition. Moreover, SMEs lasted longer in retrieval practice than in elaboration. The frontal SME in the elaborative study condition might be related to semantic processing or working memory-based elaboration, whereas the parietal and widespread SME in the retrieval practice condition might be associated with episodic recollection processes. These findings contradict the elaborative retrieval theory, and suggest that contextual recollection rather than activation of semantic information contributes to the retrieval practice effect, supporting the episodic context account. Copyright © 2017. Published by Elsevier B.V.

Simultaneous Optimization of Tooth Flank Form of Involute Helical Gears in Terms of Both Vibration and Load Carrying Capacity

NASA Astrophysics Data System (ADS)

Komori, Masaharu; Kubo, Aizoh; Suzuki, Yoshitomo

The alignment condition of automotive gears changes considerably during operation due to the deformation of shafts, bearings, and gear box by transmission of load. Under such conditions, the gears are required to satisfy not only reliability in strength and durability under maximum loading conditions, but also low vibrational characteristics under light loading conditions during the cruising of a car. In this report, the characteristics of the optimum tooth flank form of gears in terms of both vibration and load carrying capacity are clarified. The local optimum tooth flank form appears in each excitation valley, where the vibrational excitation is low and the actual contact ratio takes a specific value. The influence of the choice of different local optimum solutions on the vibrational performance of the optimized gears is investigated. The practical design algorithm for the optimum tooth flank form of a gear set in terms of both vibration and load carrying capacity is then proposed and its result is evaluated by field experience.

Rarefaction effects in microchannel gas flow driven by rhythmic wall contractions

NASA Astrophysics Data System (ADS)

Chatterjee, Krishnashis; Staples, Anne; Department of Biomedical Engineering; Mechanics, Virginia Tech Collaboration

2015-11-01

Current state of the art microfluidic devices employ precise and timely operation of a complex arrangement of micropumps and valves for fluid transport. A much more novel flow transport mechanism is found in entomological respiratory systems, which involve rhythmic wall contractions for driving the fluid flow. The practical viability of using this technique in future microfluidic devices has been studied earlier. The present study investigates the incorporation of rarefaction effects in the above model of microscale gas flow by including slip boundary conditions. The Navier Stokes equations for gas flow in rectangular microchannel are solved analytically with microscale and lubrication theory assumptions. First order slip boundary conditions are incorporated to account for the rarefaction effects. The dependence of fluid velocities and pressure gradient on the slip boundary conditions is studied. Time averaged unidirectional fluid flow rates are plotted for different phase lags between the contractions, with and without slip in order to obtain an optimum range under different conditions.

Cost accounting helps ensure group practice profitability.

PubMed

Conrad, K A; Nagle, C B; Wunar, R J

1996-11-01

Physician practice managers are faced with the challenge of developing overall practice budgets, identifying strategies for the practice, and negotiating profitable managed care contracts. To accomplish these objectives, they need to understand and manage the costs associated with practice operations. Practices that have used cost accounting methodologies to identify their operational costs in greater detail and have developed methods to effectively manage their costs are likely to be more attractive partners to health plans and better positioned to thrive under managed care.

A synthesis of the "state-of-the-practice for advancing planning and operations integration opportunities within transportation agencies".

DOT National Transportation Integrated Search

2014-12-01

Linking Planning and Operations is vital to improving transportation decision-making and overall : efficiency of transportation systems management. This synthesis summarizes current state of : knowledge and practices in Planning and Operations Integr...

Cryogenic wind tunnels: Unique capabilities for the aerodynamicist

NASA Technical Reports Server (NTRS)

Hall, R. M.

1976-01-01

The cryogenic wind-tunnel concept as a practical means for improving ground simulation of transonic flight conditions. The Langley 1/3-meter transonic cryogenic tunnel is operational, and the design of a cryogenic National Transonic Facility is undertaken. A review of some of the unique capabilities of cryogenic wind tunnels is presented. In particular, the advantages of having independent control of tunnel Mach number, total pressure, and total temperature are highlighted. This separate control over the three tunnel parameters will open new frontiers in Mach number, Reynolds number, aeroelastic, and model-tunnel interaction studies.

Ogden R. Lindsley and the historical development of precision teaching

PubMed Central

Potts, Lisa; Eshleman, John W.; Cooper, John O.

1993-01-01

This paper presents the historical developments of precision teaching, a technological offshoot of radical behaviorism and free-operant conditioning. The sequence progresses from the scientific precursors of precision teaching and the beginnings of precision teaching to principal developments since 1965. Information about the persons, events, and accomplishments presented in this chronology was compiled in several ways. Journals, books, and conference presentations provided the essential information. The most important source for this account was Ogden Lindsley himself, because Lindsley and his students established the basic practices that define precision teaching. PMID:22478145

Adaptive management of watersheds and related resources

USGS Publications Warehouse

Williams, Byron K.

2009-01-01

The concept of learning about natural resources through the practice of management has been around for several decades and by now is associated with the term adaptive management. The objectives of this paper are to offer a framework for adaptive management that includes an operational definition, a description of conditions in which it can be usefully applied, and a systematic approach to its application. Adaptive decisionmaking is described as iterative, learning-based management in two phases, each with its own mechanisms for feedback and adaptation. The linkages between traditional experimental science and adaptive management are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hugo, Jacques

The software application is called "HFE-Trace". This is an integrated method and tool for the management of Human Factors Engineering analyses and related data. Its primary purpose is to support the coherent and consistent application of the nuclear industry's best practices for human factors engineering work. The software is a custom Microsoft® Access® application. The application is used (in conjunction with other tools such as spreadsheets, checklists and normal documents where necessary) to collect data on the design of a new nuclear power plant from subject matter experts and other sources. This information is then used to identify potential systemmore » and functional breakdowns of the intended power plant design. This information is expanded by developing extensive descriptions of all functions, as well as system performance parameters, operating limits and constraints, and operational conditions. Once these have been verified, the human factors elements are added to each function, including intended operator role, function allocation considerations, prohibited actions, primary task categories, and primary work station. In addition, the application includes a computational method to assess a number of factors such as system and process complexity, workload, environmental conditions, procedures, regulations, etc.) that may shape operator performance. This is a unique methodology based upon principles described in NUREG/CR-3331 ("A methodology for allocating nuclear power plant control functions to human or automatic control") and it results in a semi-quantified allocation of functions to three or more levels of automation for a conceptual automation system. The aggregate of all this information is then linked to the Task Analysis section of the application where the existing information on all operator functions is transformed into task information and ultimately into design requirements for Human-System Interfaces and Control Rooms. This final step includes assessment of methods to prevent potential operator errors.« less

Effect of Spray Cone Angle on Flame Stability in an Annular Gas Turbine Combustor

NASA Astrophysics Data System (ADS)

Mishra, R. K.; Kumar, S. Kishore; Chandel, Sunil

2016-04-01

Effect of fuel spray cone angle in an aerogas turbine combustor has been studied using computational fluid dynamics (CFD) and full-scale combustor testing. For CFD analysis, a 22.5° sector of an annular combustor is modeled and the governing equations are solved using the eddy dissipation combustion model in ANSYS CFX computational package. The analysis has been carried out at 125 kPa and 303 K inlet conditions for spray cone angles from 60° to 140°. The lean blowout limits are established by studying the behavior of combustion zone during transient engine operation from an initial steady-state condition. The computational study has been followed by testing the practical full-scale annular combustor in an aerothermal test facility. The experimental result is in a good agreement with the computational predictions. The lean blowout fuel-air ratio increases as the spray cone angle is decreased at constant operating pressure and temperature. At higher spray cone angle, the flame and high-temperature zone moves upstream close to atomizer face and a uniform flame is sustained over a wide region causing better flame stability.

Robust fusion-based processing for military polarimetric imaging systems

NASA Astrophysics Data System (ADS)

Hickman, Duncan L.; Smith, Moira I.; Kim, Kyung Su; Choi, Hyun-Jin

2017-05-01

Polarisation information within a scene can be exploited in military systems to give enhanced automatic target detection and recognition (ATD/R) performance. However, the performance gain achieved is highly dependent on factors such as the geometry, viewing conditions, and the surface finish of the target. Such performance sensitivities are highly undesirable in many tactical military systems where operational conditions can vary significantly and rapidly during a mission. Within this paper, a range of processing architectures and fusion methods is considered in terms of their practical viability and operational robustness for systems requiring ATD/R. It is shown that polarisation information can give useful performance gains but, to retained system robustness, the introduction of polarimetric processing should be done in such a way as to not compromise other discriminatory scene information in the spectral and spatial domains. The analysis concludes that polarimetric data can be effectively integrated with conventional intensity-based ATD/R by either adapting the ATD/R processing function based on the scene polarisation or else by detection-level fusion. Both of these approaches avoid the introduction of processing bottlenecks and limit the impact of processing on system latency.

Driver performance modelling and its practical application to railway safety.

PubMed

Hamilton, W Ian; Clarke, Theresa

2005-11-01

This paper reports on the development and main features of a model of driver information processing. The work was conducted on behalf of Network Rail to meet a requirement to understand and manage the driver's interaction with the infrastructure through lineside reminder appliances. The model utilises cognitive theory and modelling techniques to describe driver performance in relation to infrastructure features and operational conditions. The model is capable of predicting the performance time, workload and error consequences of different operational conditions. The utility of the model is demonstrated through reports of its application to the following studies: Research on the effect of line speed on driver interaction with signals and signs. Calculation of minimum reading times for signals. Development of a human factors signals passed at danger (SPAD) hazard checklist, and a method to resolve conflicts between signal sighting solutions. Research on the demands imposed on drivers by European train control system (ETCS) driving in a UK context. The paper also reports on a validation of the model's utility as a tool for assessing cab and infrastructure drivability.

Pressure retarded osmosis for energy production: membrane materials and operating conditions.

PubMed

Kim, H; Choi, J-S; Lee, S

2012-01-01

Pressure retarded osmosis (PRO) is a novel membrane process to produce energy. PRO has the potential to convert the osmotic pressure difference between fresh water (i.e. river water) and seawater to electricity. Moreover, it can recover energy from highly concentrated brine in seawater desalination. Nevertheless, relatively little research has been undertaken for fundamental understanding of the PRO process. In this study, the characteristics of the PRO process were examined using a proof-of-concept device. Forward osmosis (FO), reverse osmosis (RO), and nanofiltration (NF) membranes were compared in terms of flux rate and concentration polarization ratio. The results indicated that the theoretical energy production by PRO depends on the membrane type as well as operating conditions (i.e. back pressure). The FO membrane had the highest energy efficiency while the NF membrane had the lowest efficiency. However, the energy production rate was low due to high internal concentration polarization (ICP) in the PRO membrane. This finding suggests that the control of the ICP is essential for practical application of PRO for energy production.

Resilient guaranteed cost control of a power system.

PubMed

Soliman, Hisham M; Soliman, Mostafa H; Hassan, Mohammad F

2014-05-01

With the development of power system interconnection, the low-frequency oscillation is becoming more and more prominent which may cause system separation and loss of energy to consumers. This paper presents an innovative robust control for power systems in which the operating conditions are changing continuously due to load changes. However, practical implementation of robust control can be fragile due to controller inaccuracies (tolerance of resistors used with operational amplifiers). A new design of resilient (non-fragile) robust control is given that takes into consideration both model and controller uncertainties by an iterative solution of a set of linear matrix inequalities (LMI). Both uncertainties are cast into a norm-bounded structure. A sufficient condition is derived to achieve the desired settling time for damping power system oscillations in face of plant and controller uncertainties. Furthermore, an improved controller design, resilient guaranteed cost controller, is derived to achieve oscillations damping in a guaranteed cost manner. The effectiveness of the algorithm is shown for a single machine infinite bus system, and then, it is extended to multi-area power system.

Interoperability Assets for Patient Summary Components: A Gap Analysis.

PubMed

Heitmann, Kai U; Cangioli, Giorgio; Melgara, Marcello; Chronaki, Catherine

2018-01-01

The International Patient Summary (IPS) standards aim to define the specifications for a minimal and non-exhaustive Patient Summary, which is specialty-agnostic and condition-independent, but still clinically relevant. Meanwhile, health systems are developing and implementing their own variation of a patient summary while, the eHealth Digital Services Infrastructure (eHDSI) initiative is deploying patient summary services across countries in the Europe. In the spirit of co-creation, flexible governance, and continuous alignment advocated by eStandards, the Trillum-II initiative promotes adoption of the patient summary by engaging standards organizations, and interoperability practitioners in a community of practice for digital health to share best practices, tools, data, specifications, and experiences. This paper compares operational aspects of patient summaries in 14 case studies in Europe, the United States, and across the world, focusing on how patient summary components are used in practice, to promote alignment and joint understanding that will improve quality of standards and lower costs of interoperability.

Forward osmosis membrane modular configurations for osmotic dilution of seawater by forward osmosis and reverse osmosis hybrid system.

PubMed

Kim, Jung Eun; Phuntsho, Sherub; Ali, Syed Muztuza; Choi, Joon Young; Shon, Ho Kyong

2018-01-01

This study evaluates various options for full-scale modular configuration of forward osmosis (FO) process for osmotic dilution of seawater using wastewater for simultaneous desalination and water reuse through FO-reverse osmosis (RO) hybrid system. Empirical relationship obtained from one FO membrane element operation was used to simulate the operational performances of different FO module configurations. The main limiting criteria for module operation is to always maintain the feed pressure higher than the draw pressure throughout the housing module for safe operation without affecting membrane integrity. Experimental studies under the conditions tested in this study show that a single membrane housing cannot accommodate more than four elements as the draw pressure exceeds the feed pressure. This then indicates that a single stage housing with eight elements is not likely to be practical for safe FO operation. Hence, six different FO modular configurations were proposed and simulated. A two-stage FO configuration with multiple housings (in parallel) in the second stage using same or larger spacer thickness reduces draw pressure build-up as the draw flow rates are reduced to half in the second stage thereby allowing more than four elements in the second stage housing. The loss of feed pressure (pressure drop) and osmotic driving force in the second stage are compensated by operating under the pressure assisted osmosis (PAO) mode, which helps enhance permeate flux and maintains positive pressure differences between the feed and draw chamber. The PAO energy penalty is compensated by enhanced permeate throughput, reduced membrane area, and plant footprint. The contribution of FO/PAO to total energy consumption was not significant compared to post RO desalination (90%) indicating that the proposed two-stage FO modular configuration is one way of making the FO full-scale operation practical for FO-RO hybrid system. Copyright © 2017 Elsevier Ltd. All rights reserved.

A pragmatic cluster randomised trial evaluating three implementation interventions.

PubMed

Rycroft-Malone, Jo; Seers, Kate; Crichton, Nicola; Chandler, Jackie; Hawkes, Claire A; Allen, Claire; Bullock, Ian; Strunin, Leo

2012-08-30

Implementation research is concerned with bridging the gap between evidence and practice through the study of methods to promote the uptake of research into routine practice. Good quality evidence has been summarised into guideline recommendations to show that peri-operative fasting times could be considerably shorter than patients currently experience. The objective of this trial was to evaluate the effectiveness of three strategies for the implementation of recommendations about peri-operative fasting. A pragmatic cluster randomised trial underpinned by the PARIHS framework was conducted during 2006 to 2009 with a national sample of UK hospitals using time series with mixed methods process evaluation and cost analysis. Hospitals were randomised to one of three interventions: standard dissemination (SD) of a guideline package, SD plus a web-based resource championed by an opinion leader, and SD plus plan-do-study-act (PDSA). The primary outcome was duration of fluid fast prior to induction of anaesthesia. Secondary outcomes included duration of food fast, patients' experiences, and stakeholders' experiences of implementation, including influences. ANOVA was used to test differences over time and interventions. Nineteen acute NHS hospitals participated. Across timepoints, 3,505 duration of fasting observations were recorded. No significant effect of the interventions was observed for either fluid or food fasting times. The effect size was 0.33 for the web-based intervention compared to SD alone for the change in fluid fasting and was 0.12 for PDSA compared to SD alone. The process evaluation showed different types of impact, including changes to practices, policies, and attitudes. A rich picture of the implementation challenges emerged, including inter-professional tensions and a lack of clarity for decision-making authority and responsibility. This was a large, complex study and one of the first national randomised controlled trials conducted within acute care in implementation research. The evidence base for fasting practice was accepted by those participating in this study and the messages from it simple; however, implementation and practical challenges influenced the interventions' impact. A set of conditions for implementation emerges from the findings of this study, which are presented as theoretically transferable propositions that have international relevance. ISRCTN18046709--Peri-operative Implementation Study Evaluation (POISE).

Medical Oversight, Educational Core Content, and Proposed Scopes of Practice of Wilderness EMS Providers: A Joint Project Developed by Wilderness EMS Educators, Medical Directors, and Regulators Using a Delphi Approach.

PubMed

Millin, Michael G; Johnson, David E; Schimelpfenig, Tod; Conover, Keith; Sholl, Matthew; Busko, Jonnathan; Alter, Rachael; Smith, Will; Symonds, Jennifer; Taillac, Peter; Hawkins, Seth C

2017-01-01

A disparity exists between the skills needed to manage patients in wilderness EMS environments and the scopes of practice that are traditionally approved by state EMS regulators. In response, the National Association of EMS Physicians Wilderness EMS Committee led a project to define the educational core content supporting scopes of practice of wilderness EMS providers and the conditions when wilderness EMS providers should be required to have medical oversight. Using a Delphi process, a group of experts in wilderness EMS, representing educators, medical directors, and regulators, developed model educational core content. This core content is a foundation for wilderness EMS provider scopes of practice and builds on both the National EMS Education Standards and the National EMS Scope of Practice Model. These experts also identified the conditions when oversight is needed for wilderness EMS providers. By consensus, this group of experts identified the educational core content for four unique levels of wilderness EMS providers: Wilderness Emergency Medical Responder (WEMR), Wilderness Emergency Medical Technician (WEMT), Wilderness Advanced Emergency Medical Technician (WAEMT), and Wilderness Paramedic (WParamedic). These levels include specialized skills and techniques pertinent to the operational environment. The skills and techniques increase in complexity with more advanced certification levels, and address the unique circumstances of providing care to patients in the wilderness environment. Furthermore, this group identified that providers having a defined duty to act should be functioning with medical oversight. This group of experts defined the educational core content supporting the specific scopes of practice that each certification level of wilderness EMS provider should have when providing patient care in the wilderness setting. Wilderness EMS providers are, indeed, providing health care and should thus function within defined scopes of practice and with physician medical director oversight.

Satellite Mission Operations Best Practices

NASA Technical Reports Server (NTRS)

Galal, Ken; Hogan, Roger P. (Technical Monitor)

2001-01-01

The effort of compiling a collection of Best Practices for use in Space Mission Operations was initiated within a subcommittee of the American Institute of Aeronautics and Astronautics (AIAA) Space Operations and Support Technical Committee (SOSTC). The idea was to eventually post a collection of Best Practices on a website so as to make them available to the general Space Operations community. The effort of searching for available Best Practices began in the fall of 1999. As the search progressed, it became apparent that there were not many Best Practices developed that were available to the general community. Therefore, the subcommittee decided to use the SOSTC Annual Workshop on Reducing Space Mission Costs as a forum for developing Best Practices for our purpose of sharing them with a larger audience. A dedicated track at the April 2000 workshop was designed to stimulate discussions on developing such Best Practices and forming working groups made up of experienced people from various organizations to perform the development. These groups were solicited to help outside the workshop to bring this effort to fruition. Since that time, biweekly teleconferences have been held to discuss the development of the Best Practices and their posting.

Revenue management of air cargo service in theory and practice

NASA Astrophysics Data System (ADS)

Budiarto, S.; Putro, H. P.; Pradono, P.; Yudoko, G.

2018-05-01

This study examines the air cargo service by comparing existing theories from previous research with the conditions on the ground. The object of the study is focused on the freight forwarder and the airport management. This study reviews the models and results of previous research that will be summarized and used to identify any issues related to the characteristics of air cargo operational services, as well as observing and monitoring literature with airlines, shipping companies, and airport management to explore and see the gap between prior research and implementation of its process in the air cargo service. The first phase in this study is to provide an overview of the air cargo industry. The second phase analyzes the characteristic differences between air cargo services and air passenger operating services. And the third phase is a literary bibliography study of air cargo operations, where the focus is on the studies using quantitative models from the perspective of the object of the study, which is the optimization of revenue management on air cargo services. From the results of the study, which is based on the gap between theory and practice, new research opportunities which are related to management of air cargo service revenue in the form of model development are found by adding booking timelines aspects of cargo that can affect the revenue of cargo airline companies and airports.

Optimization of Large-Scale Daily Hydrothermal System Operations With Multiple Objectives

NASA Astrophysics Data System (ADS)

Wang, Jian; Cheng, Chuntian; Shen, Jianjian; Cao, Rui; Yeh, William W.-G.

2018-04-01

This paper proposes a practical procedure for optimizing the daily operation of a large-scale hydrothermal system. The overall procedure optimizes a monthly model over a period of 1 year and a daily model over a period of up to 1 month. The outputs from the monthly model are used as inputs and boundary conditions for the daily model. The models iterate and update when new information becomes available. The monthly hydrothermal model uses nonlinear programing (NLP) to minimize fuel costs, while maximizing hydropower production. The daily model consists of a hydro model, a thermal model, and a combined hydrothermal model. The hydro model and thermal model generate the initial feasible solutions for the hydrothermal model. The two competing objectives considered in the daily hydrothermal model are minimizing fuel costs and minimizing thermal emissions. We use the constraint method to develop the trade-off curve (Pareto front) between these two objectives. We apply the proposed methodology on the Yunnan hydrothermal system in China. The system consists of 163 individual hydropower plants with an installed capacity of 48,477 MW and 11 individual thermal plants with an installed capacity of 12,400 MW. We use historical operational records to verify the correctness of the model and to test the robustness of the methodology. The results demonstrate the practicability and validity of the proposed procedure.

40 CFR 63.550 - Recordkeeping and reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... recordkeeping required as part of the practices described in the standard operating procedures manual for... part of the practices described in the standard operating procedures manual for baghouses required... period, including an explanation of the periods when the procedures outlined in the standard operating...

40 CFR 63.550 - Recordkeeping and reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... recordkeeping required as part of the practices described in the standard operating procedures manual for... part of the practices described in the standard operating procedures manual for baghouses required... period, including an explanation of the periods when the procedures outlined in the standard operating...

Autogenic-feedback training: A potential treatment for post-flight orthostatic intolerance in aerospace crews

NASA Technical Reports Server (NTRS)

Cowings, Patricia S.; Toscano, William B.; Miller, Neil E.; Pickering, Thomas G.; Shapiro, David

1993-01-01

Postflight orthostatic intolerance was identified as a serious biomedical problem associated with long duration exposure to microgravity in space. High priority was given to the development of countermeasures for this disorder which are both effective and practical. A considerable body of clinical research demonstrated that people can be taught to increase their own blood pressure voluntarily and that this is an effective treatment for chronic orthostatic intolerance in paralyzed patients. The present pilot study was designed to examine the feasibility of adding training in control of blood pressure to an existing preflight training program designed to facilitate astronaut adaptation to microgravity. Using an operant conditioning procedure, Autogenic-Feedback Training (AFT), three men and two women participated in four to nine (15-30 training sessions). At the end of training, the average increase in systolic and diastolic pressure, as well as mean arterial pressures that the subjects made, ranged between 20 and 5O mmHg under both supine and 45 deg head-up tilt conditions. These findings suggest that AFT may be a useful alternative treatment or supplement to existing approaches for preventing postflight orthostatic intolerance. Further, the use of operant conditioning methods for training cardiovascular responses may contribute to the general understanding of the mechanisms of orthostatic intolerance.

Conditional moment closure for two-phase flows - A review of recent developments and application to various spray combustion configurations

NASA Astrophysics Data System (ADS)

Wright, Y. M.; Bolla, M.; Boulouchos, K.; Borghesi, G.; Mastorakos, E.

2015-01-01

Energy conversion devices of practical interest such as engines or combustors operate in highly turbulent flow regimes. Due to the nature of the hydrocarbon fuels employed, the oxidation chemistry involves a broad range of time-scales some of which cannot be decoupled from the flow. Among the approaches utilised to tackle the modelling of turbulent combustion, Conditional Moment Closure (CMC), belonging to the computationally efficient class of presumed PDF methods, has shown great potential. For single-phase flows it has been demonstrated on non-premixed turbulent lifted and opposed jets, lifted flames and auto-igniting jets. Here we seek to review recent advances in both modelling and application of CMC for auto-ignition of fuel sprays. The experiments chosen for code validation and model improvement include generic spray test rigs with dimensions of passenger car as well as large two-stroke marine engines. Data for a broad range of operating conditions of a heavy-duty truck engine is additionally employed to assess the predictive capability of the model with respect to NOx emissions. An outlook on future enhancements including e.g. LES-CMC formulation also for two-phase flows as well as developments in the field of soot emissions are summarised briefly.

Pathway Design Effects on Synthetic Vision Head-Up Displays

NASA Technical Reports Server (NTRS)

Kramer, Lynda J.; Prinzel, Lawrence J., III; Arthur, Jarvis J., III; Bailey, Randall E.

2004-01-01

NASA s Synthetic Vision Systems (SVS) project is developing technologies with practical applications that will eliminate low visibility conditions as a causal factor to civil aircraft accidents while replicating the operational benefits of clear day flight operations, regardless of the actual outside visibility condition. A major thrust of the SVS project involves the development/demonstration of affordable, certifiable display configurations that provide intuitive out-the-window terrain and obstacle information with advanced pathway guidance for transport aircraft. This experiment evaluated the influence of different tunnel and guidance concepts upon pilot situation awareness (SA), mental workload, and flight path tracking performance for Synthetic Vision display concepts using a Head-Up Display (HUD). Two tunnel formats (dynamic, minimal) were evaluated against a baseline condition (no tunnel) during simulated IMC approaches to Reno-Tahoe International airport. Two guidance cues (tadpole, follow-me aircraft) were also evaluated to assess their influence on the tunnel formats. Results indicated that the presence of a tunnel on an SVS HUD had no effect on flight path performance but that it did have significant effects on pilot SA and mental workload. The dynamic tunnel concept with the follow-me aircraft guidance symbol produced the lowest workload and provided the highest SA among the tunnel concepts evaluated.

Evaluative Conditioning: The “How” Question

PubMed Central

Jones, Christopher R.; Olson, Michael A.; Fazio, Russell H.

2011-01-01

Evaluative conditioning (EC) refers to attitude formation or change toward an object due to that object's mere co-occurrence with another valenced object or objects. This chapter focuses on the “how” question, that is, the question of what cognitive processes intervene between mere co-occurrence and attitude formation or change. Though EC has typically been thought of as occurring through a single, albeit contentious, mechanism, we begin by pointing out that both the heterogeneity of EC methodologies and the abundance of inconsistent results suggest that multiple processes with different characteristics can produce EC. We describe how the earliest posited process of EC, Pavlovian conditioning or signal learning, is a valid mechanism of EC that appears to have operated in some experiments but is unlikely to have operated in others and also cannot account for various EC findings. We describe other mechanisms of EC, when they can be expected to occur, and what characteristics they have. We particularly focus our attention on a process model of EC we have recently introduced, the implicit misattribution model. Finally, we describe the implications of a multi-process view of EC, which we argue can help resolve theoretical controversies and further the application of EC as a practical intervention for influencing attitudes in various domains. PMID:22241936

Autogenic-Feedback Training: A Potential Treatment for Orthostatic Intolerance in Aerospace Crews

NASA Technical Reports Server (NTRS)

Cowings, P. S.; Toscano, W. B.; Miller, N. E.; Pickering, T. G.; Shapiro, D.; Stevenson, J.; Maloney, S.; Knapp, J.

1994-01-01

Postflight orthostatic intolerance has been identified as a serious biomedical problem associated with long-duration exposure to microgravity in space. High priority has been given to the development of countermeasures for this disorder that are both effective and practical. A considerable body of clinical research has demonstrated that people can be taught to increase their own blood pressure voluntarily, and that this is an effective treatment for chronic orthostatic intolerance in paralyzed patients. The current pilot study was designed to examine the feasibility of adding training in control of blood pressure to an existing preflight training program designed to facilitate astronaut adaptation to microgravity. Using an operant conditioning procedure, autogenic-feedback training (AFT), three men and two women participated in four to nine training (15-30-minute) sessions. At the end of training, the average increase in systolic and diastolic pressure, as well as mean arterial pressures, that the subjects made ranged between 20 and 50 mm Hg under both supine and 45 deg head-up tilt conditions. These findings indicate that AFT may be a useful alternative treatment or supplement to existing approaches for preventing postflight orthostatic intolerance. Furthermore, the use of operant conditioning methods for training cardiovascular responses may contribute to the general understanding of the mechanisms of orthostatic intolerance.

Effect of Reverse Bias Stress on Leakage Currents and Breakdown Voltages of Solid Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander A.

2011-01-01

The majority of solid tantalum capacitors are produced by high-temperature sintering of a fine tantalum powder around a tantalum wire followed by electrolytic anodization that forms a thin amorphous Ta2O5 dielectric layer and pyrolysis of manganese nitrite on the oxide to create a conductive manganese dioxide electrode. A contact to tantalum wire is used as anode terminal and to the manganese layer as a cathode terminal of the device. This process results in formation of an asymmetric Ta -- Ta2O5 -- MnO2 capacitor that has different characteristics at forward (positive bias applied to tantalum) and reverse (positive bias applied to manganese cathode) voltages. Reverse bias currents might be several orders of magnitude larger than forward leakage currents so I-V characteristics of tantalum capacitors resemble characteristics of semiconductor rectifiers. Asymmetric I-V characteristics of Ta -- anodic Ta2O5 systems have been observed at different top electrode materials including metals, electrolytes, conductive polymers, and manganese oxide thus indicating that this phenomenon is likely related to the specifics of the Ta -- Ta2O5 interface. There have been multiple attempts to explain rectifying characteristics of capacitors employing anodic tantalum pentoxide dielectrics. A brief review of works related to reverse bias (RB) behavior of tantalum capacitors shows that the mechanism of conduction in Ta -- Ta2O5 systems is still not clear and more testing and analysis is necessary to understand the processes involved. If tantalum capacitors behave just as rectifiers, then the assessment of the safe reverse bias operating conditions would be a relatively simple task. Unfortunately, these parts can degrade with time under reverse bias significantly, and this further complicates analysis of the I-V characteristics and establishing safe operating areas of the parts. On other hand, time dependence of reverse currents might provide additional information for investigation of the processes under reverse bias conditions. In practice, there were instances when, due to unforeseen events, the system operated at conditions when capacitors experience periodically a relatively small reverse bias for some time followed by normal, forward bias conditions. In such a case an assessment should be made on the degree to which these capacitors are degraded by application of low-voltage reverse bias, and whether this degradation can be reversed by normal operating conditions. In this study, reverse currents in different types of tantalum capacitors were monitored at different reverse voltages below 15%VR and temperatures in the range from room to 145 C for up to 150 hours to get better understanding of the degradation process and determine conditions favorable to the unstable mode of operation. The reversibility of RB degradation has been evaluated after operation of the capacitors at forward bias conditions. The effect of reverse bias stress (RBS) on reliability at normal operating conditions was evaluated using highly accelerated life testing at voltages of 1.5VR and 2 VR and by analysis of changes in distributions of breakdown voltages. Possible mechanisms of RB degradation are discussed.

The impact of training and working conditions on junior doctors’ intention to leave clinical practice

PubMed Central

2014-01-01

Background The shortage of physicians is an evolving problem throughout the world. In this study we aimed to identify to what extent junior doctors’ training and working conditions determine their intention to leave clinical practice after residency training. Methods A prospective cohort study was conducted in 557 junior doctors undergoing residency training in German hospitals. Self-reported specialty training conditions, working conditions and intention to leave clinical practice were measured over three time points. Scales covering training conditions were assessed by structured residency training, professional support, and dealing with lack of knowledge; working conditions were evaluated by work overload, job autonomy and social support, based on the Demand–Control–Support model. Multivariate ordinal logistic regression analyses with random intercept for longitudinal data were applied to determine the odds ratio of having a higher level of intention to leave clinical practice. Results In the models that considered training and working conditions separately to predict intention to leave clinical practice we found significant baseline effects and change effects. After modelling training and working conditions simultaneously, we found evidence that the change effect of job autonomy (OR 0.77, p = .005) was associated with intention to leave clinical practice, whereas for the training conditions, only the baseline effects of structured residency training (OR 0.74, p = .017) and dealing with lack of knowledge (OR 0.74, p = .026) predicted intention to leave clinical practice. Conclusions Junior doctors undergoing specialty training experience high workload in hospital practice and intense requirements in terms of specialty training. Our study indicates that simultaneously improving working conditions over time and establishing a high standard of specialty training conditions may prevent junior doctors from considering leaving clinical practice after residency training. PMID:24942360

Guide to good practices for operations and administration updates through required reading

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This Guide to Good Practices is written to enhance understanding of, and provide direction for, Required Reading, Chapter XIV of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing programs for updating personnel with operations and administration information through required reading. Contractors are advised to adopt procedures that meet the intent of DOE Order 5480.19. Required Reading is an element of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for a coordinated requiredmore » reading program to promote safe and efficient operations.« less

Utilizing Simulation-Based Training of Video Clip Instruction for the Store Service Operations Practice Course

ERIC Educational Resources Information Center

Lin, Che-Hung; Yen, Yu-Ren; Wu, Pai-Lu

2015-01-01

The aim of this study was to develop a store service operations practice course based on simulation-based training of video clip instruction. The action research of problem-solving strategies employed for teaching are by simulated store operations. The counter operations course unit used as an example, this study developed 4 weeks of subunits for…

DIAGNOdent Pen versus tactile sense for detection of subgingival calculus: an in vitro study.

PubMed

Shakibaie, Fardad; Walsh, Laurence J

2015-10-01

The objective of this study is to compare the performance of the DIAGNOdent laser fluorescence (LF) Pen to conventional periodontal probing for detection of subgingival calculus under defined laboratory conditions. Extracted teeth with various levels of subgingival deposits of calculus were mounted anatomically in stone casts, and an impression material was used to replicate periodontal soft tissues. The casts were examined for the presence of subgingival calculus at eight surfaces per tooth (240 sites) using LF and a periodontal probe. Sites were rescored after 1 and 3 weeks. Direct imaging of the root surfaces under magnification was the gold standard. As a result, for an experienced operator, LF was more accurate than tactile assessment (across all sites, 84.0% vs. 59.8%). The performance difference was greater for multi-rooted teeth (85.8% vs. 56.9%) than single-rooted teeth (77.2% vs. 66.7%). The performance of LF in this laboratory trial was influenced strongly by clinician skill and experience. When used by an experienced operator, LF was more sensitive (75.1% vs. 69.2%), specific (92.6% vs. 86.3%), and accurate (84% vs. 77.9%) than for an inexperienced operator. In conclusion, under the defined laboratory conditions used, LF had better performance than tactile examination, particularly for multi-rooted teeth. This method may have value clinically as an adjunct for detecting subgingival deposits of calculus in clinical practice. The usefulness of the method improves with operator experience.

Features of Creation and Operation of Electric and Hybrid Vehicles in Countries with Difficult Climatic Conditions, for Example, in the Russian Federation

NASA Astrophysics Data System (ADS)

Karpukhin, K.; Terenchenko, A.

2016-11-01

The trend of increasing fleet of electric or hybrid vehicles and determines the extension of the geographical areas of operation, including the Northern areas with cold winter weather. Practically in all territory of Russia the average winter temperature is negative. With the winter temperatures can be below in Moscow -30°C, in Krasnoyarsk -50°C. Battery system can operate in a wide temperature range, but there are extremes that should be remembered all the time, especially in cold climates like Russia. In the operating instructions of the electric car Tesla Model S indicate that to save the battery don't use at temperatures below -15°C. The paper presents the dependence of the cooling time and heating of the battery cell at different ambient temperatures and provides guidance on allowable cooling time while using and not thermally insulated thermally containers Suggests using the temperature control on the basis of thermoelectric converters Peltier connection from the onboard electrical network of the electric vehicle.

All the noncontextuality inequalities for arbitrary prepare-and-measure experiments with respect to any fixed set of operational equivalences

NASA Astrophysics Data System (ADS)

Schmid, David; Spekkens, Robert W.; Wolfe, Elie

2018-06-01

Within the framework of generalized noncontextuality, we introduce a general technique for systematically deriving noncontextuality inequalities for any experiment involving finitely many preparations and finitely many measurements, each of which has a finite number of outcomes. Given any fixed sets of operational equivalences among the preparations and among the measurements as input, the algorithm returns a set of noncontextuality inequalities whose satisfaction is necessary and sufficient for a set of operational data to admit of a noncontextual model. Additionally, we show that the space of noncontextual data tables always defines a polytope. Finally, we provide a computationally efficient means for testing whether any set of numerical data admits of a noncontextual model, with respect to any fixed operational equivalences. Together, these techniques provide complete methods for characterizing arbitrary noncontextuality scenarios, both in theory and in practice. Because a quantum prepare-and-measure experiment admits of a noncontextual model if and only if it admits of a positive quasiprobability representation, our techniques also determine the necessary and sufficient conditions for the existence of such a representation.

Combustor Operability and Performance Verification for HIFiRE Flight 2

NASA Technical Reports Server (NTRS)

Storch, Andrea M.; Bynum, Michael; Liu, Jiwen; Gruber, Mark

2011-01-01

As part of the Hypersonic International Flight Research Experimentation (HIFiRE) Direct-Connect Rig (HDCR) test and analysis activity, three-dimensional computational fluid dynamics (CFD) simulations were performed using two Reynolds-Averaged Navier Stokes solvers. Measurements obtained from ground testing in the NASA Langley Arc-Heated Scramjet Test Facility (AHSTF) were used to specify inflow conditions for the simulations and combustor data from four representative tests were used as benchmarks. Test cases at simulated flight enthalpies of Mach 5.84, 6.5, 7.5, and 8.0 were analyzed. Modeling parameters (e.g., turbulent Schmidt number and compressibility treatment) were tuned such that the CFD results closely matched the experimental results. The tuned modeling parameters were used to establish a standard practice in HIFiRE combustor analysis. Combustor performance and operating mode were examined and were found to meet or exceed the objectives of the HIFiRE Flight 2 experiment. In addition, the calibrated CFD tools were then applied to make predictions of combustor operation and performance for the flight configuration and to aid in understanding the impacts of ground and flight uncertainties on combustor operation.

An optimal output feedback gain variation scheme for the control of plants exhibiting gross parameter changes

NASA Technical Reports Server (NTRS)

Moerder, Daniel D.

1987-01-01

A concept for optimally designing output feedback controllers for plants whose dynamics exhibit gross changes over their operating regimes was developed. This was to formulate the design problem in such a way that the implemented feedback gains vary as the output of a dynamical system whose independent variable is a scalar parameterization of the plant operating point. The results of this effort include derivation of necessary conditions for optimality for the general problem formulation, and for several simplified cases. The question of existence of a solution to the design problem was also examined, and it was shown that the class of gain variation schemes developed are capable of achieving gain variation histories which are arbitrarily close to the unconstrained gain solution for each point in the plant operating range. The theory was implemented in a feedback design algorithm, which was exercised in a numerical example. The results are applicable to the design of practical high-performance feedback controllers for plants whose dynamics vary significanly during operation. Many aerospace systems fall into this category.

40 CFR 63.1549 - Recordkeeping and reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... recordkeeping required as part of the practices described in the standard operating procedures manual for... as part of the practices described in the standard operating procedures manual for baghouses required... procedures outlined in the standard operating procedures manual required by § 63.1544(a) were not followed...

40 CFR 63.1549 - Recordkeeping and reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... recordkeeping required as part of the practices described in the standard operating procedures manual for... as part of the practices described in the standard operating procedures manual for baghouses required... procedures outlined in the standard operating procedures manual required by § 63.1544(a) were not followed...

40 CFR 63.1549 - Recordkeeping and reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... recordkeeping required as part of the practices described in the standard operating procedures manual for... as part of the practices described in the standard operating procedures manual for baghouses required... procedures outlined in the standard operating procedures manual required by § 63.1544(a) were not followed...

40 CFR 63.1654 - Operational and work practice standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... according to a written fugitive dust control plan must be incorporated in the operating permit for the... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Operational and work practice standards... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES...

49 CFR 212.223 - Operating practices compliance inspector.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (1) A basic knowledge of railroad operations, duties of railroad employees and general railroad safety as it relates to the protection of railroad employees; (2) A basic knowledge of railroad rules and...) of this section; and (4) Specialized knowledge of the requirements of the Federal operating practices...