Enabling Parametric Optimal Ascent Trajectory Modeling During Early Phases of Design

NASA Technical Reports Server (NTRS)

Holt, James B.; Dees, Patrick D.; Diaz, Manuel J.

2015-01-01

During the early phases of engineering design, the costs committed are high, costs incurred are low, and the design freedom is high. It is well documented that decisions made in these early design phases drive the entire design's life cycle. In a traditional paradigm, key design decisions are made when little is known about the design. As the design matures, design changes become more difficult -- in both cost and schedule -- to enact. Indeed, the current capability-based paradigm that has emerged because of the constrained economic environment calls for the infusion of knowledge acquired during later design phases into earlier design phases, i.e. bring knowledge acquired during preliminary and detailed design into pre-conceptual and conceptual design. An area of critical importance to launch vehicle design is the optimization of its ascent trajectory, as the optimal trajectory will be able to take full advantage of the launch vehicle's capability to deliver a maximum amount of payload into orbit. Hence, the optimal ascent trajectory plays an important role in the vehicle's affordability posture as the need for more economically viable access to space solutions are needed in today's constrained economic environment. The problem of ascent trajectory optimization is not a new one. There are several programs that are widely used in industry that allows trajectory analysts to, based on detailed vehicle and insertion orbit parameters, determine the optimal ascent trajectory. Yet, little information is known about the launch vehicle early in the design phase - information that is required of many different disciplines in order to successfully optimize the ascent trajectory. Thus, the current paradigm of optimizing ascent trajectories involves generating point solutions for every change in a vehicle's design parameters. This is often a very tedious, manual, and time-consuming task for the analysts. Moreover, the trajectory design space is highly non-linear and multi-modal due to the interaction of various constraints. Additionally, when these obstacles are coupled with The Program to Optimize Simulated Trajectories [1] (POST), an industry standard program to optimize ascent trajectories that is difficult to use, it requires expert trajectory analysts to effectively optimize a vehicle's ascent trajectory. As it has been pointed out, the paradigm of trajectory optimization is still a very manual one because using modern computational resources on POST is still a challenging problem. The nuances and difficulties involved in correctly utilizing, and therefore automating, the program presents a large problem. In order to address these issues, the authors will discuss a methodology that has been developed. The methodology is two-fold: first, a set of heuristics will be introduced and discussed that were captured while working with expert analysts to replicate the current state-of-the-art; secondly, leveraging the power of modern computing to evaluate multiple trajectories simultaneously, and therefore, enable the exploration of the trajectory's design space early during the pre-conceptual and conceptual phases of design. When this methodology is coupled with design of experiments in order to train surrogate models, the authors were able to visualize the trajectory design space, enabling parametric optimal ascent trajectory information to be introduced with other pre-conceptual and conceptual design tools. The potential impact of this methodology's success would be a fully automated POST evaluation suite for the purpose of conceptual and preliminary design trade studies. This will enable engineers to characterize the ascent trajectory's sensitivity to design changes in an arbitrary number of dimensions and for finding settings for trajectory specific variables, which result in optimal performance for a "dialed-in" launch vehicle design. The effort described in this paper was developed for the Advanced Concepts Office [2] at NASA Marshall Space Flight Center

Congenital toxoplasmosis transmitted from an immunologically competent mother infected before conception.

PubMed

Vogel, N; Kirisits, M; Michael, E; Bach, H; Hostetter, M; Boyer, K; Simpson, R; Holfels, E; Hopkins, J; Mack, D; Mets, M B; Swisher, C N; Patel, D; Roizen, N; Stein, L; Stein, M; Withers, S; Mui, E; Egwuagu, C; Remington, J; Dorfman, R; McLeod, R

1996-11-01

Congenital transmission of Toxoplasma gondii from a mother who was apparently immunologically competent and who had toxoplasmic lymphadenitis 2 months before conception is described. Since no T. gondii-specific serological data were available for this mother from the time her lymph node biopsy specimen was obtained, the specimen was studied by polymerase chain reaction (PCR) to determine whether the T. gondii B1 gene was present. The predictive diagnostic value of histologic findings previously considered to be classic signs of T. gondii lymphadenitis also was studied. This was done by correlation of serological tests diagnostic of acute acquired T. gondii infection and presence of characteristic findings in biopsy specimens from persons without known immunocompromise. Both PCR and review of the characteristic features of her lymph node biopsy specimen confirmed the diagnosis of preconceptual infection in the mother. We also discuss two other cases in which apparently immunologically competent mothers with preconceptually acquired infection transmitted this parasite to their fetuses.

Augmenting Parametric Optimal Ascent Trajectory Modeling with Graph Theory

NASA Technical Reports Server (NTRS)

Dees, Patrick D.; Zwack, Matthew R.; Edwards, Stephen; Steffens, Michael

2016-01-01

It has been well documented that decisions made in the early stages of Conceptual and Pre-Conceptual design commit up to 80% of total Life-Cycle Cost (LCC) while engineers know the least about the product they are designing [1]. Once within Preliminary and Detailed design however, making changes to the design becomes far more difficult to enact in both cost and schedule. Primarily this has been due to a lack of detailed data usually uncovered later during the Preliminary and Detailed design phases. In our current budget-constrained environment, making decisions within Conceptual and Pre-Conceptual design which minimize LCC while meeting requirements is paramount to a program's success. Within the arena of launch vehicle design, optimizing the ascent trajectory is critical for minimizing the costs present within such concerns as propellant, aerodynamic, aeroheating, and acceleration loads while meeting requirements such as payload delivered to a desired orbit. In order to optimize the vehicle design its constraints and requirements must be known, however as the design cycle proceeds it is all but inevitable that the conditions will change. Upon that change, the previously optimized trajectory may no longer be optimal, or meet design requirements. The current paradigm for adjusting to these updates is generating point solutions for every change in the design's requirements [2]. This can be a tedious, time-consuming task as changes in virtually any piece of a launch vehicle's design can have a disproportionately large effect on the ascent trajectory, as the solution space of the trajectory optimization problem is both non-linear and multimodal [3]. In addition, an industry standard tool, Program to Optimize Simulated Trajectories (POST), requires an expert analyst to produce simulated trajectories that are feasible and optimal [4]. In a previous publication the authors presented a method for combatting these challenges [5]. In order to bring more detailed information into Conceptual and Pre-Conceptual design, knowledge of the effects originating from changes to the vehicle must be calculated. In order to do this, a model capable of quantitatively describing any vehicle within the entire design space under consideration must be constructed. This model must be based upon analysis of acceptable fidelity, which in this work comes from POST. Design space interrogation can be achieved with surrogate modeling, a parametric, polynomial equation representing a tool. A surrogate model must be informed by data from the tool with enough points to represent the solution space for the chosen number of variables with an acceptable level of error. Therefore, Design Of Experiments (DOE) is used to select points within the design space to maximize information gained on the design space while minimizing number of data points required. To represent a design space with a non-trivial number of variable parameters the number of points required still represent an amount of work which would take an inordinate amount of time via the current paradigm of manual analysis, and so an automated method was developed. The best practices of expert trajectory analysts working within NASA Marshall's Advanced Concepts Office (ACO) were implemented within a tool called multiPOST. These practices include how to use the output data from a previous run of POST to inform the next, determining whether a trajectory solution is feasible from a real-world perspective, and how to handle program execution errors. The tool was then augmented with multiprocessing capability to enable analysis on multiple trajectories simultaneously, allowing throughput to scale with available computational resources. In this update to the previous work the authors discuss issues with the method and solutions.

Oxygen production on the Lunar materials processing frontier

NASA Technical Reports Server (NTRS)

Altenberg, Barbara H.

1992-01-01

During the pre-conceptual design phase of an initial lunar oxygen processing facility, it is essential to identify and compare the available processes and evaluate them in order to ensure the success of such an endeavor. The focus of this paper is to provide an overview of materials processing to produce lunar oxygen as one part of a given scenario of a developing lunar occupation. More than twenty-five techniques to produce oxygen from lunar materials have been identified. While it is important to continue research on any feasible method, not all methods can be implemented at the initial lunar facility. Hence, it is necessary during the pre-conceptual design phase to evaluate all methods and determine the leading processes for initial focus. Researchers have developed techniques for evaluating the numerous proposed methods in order to suggest which processes would be best to go to the Moon first. As one section in this paper, the recent evaluation procedures that have been presented in the literature are compared and contrasted. In general, the production methods for lunar oxygen fall into four categories: thermochemical, reactive solvent, pyrolytic, and electrochemical. Examples from two of the four categories are described, operating characteristics are contrasted, and terrestrial analogs are presented when possible. In addition to producing oxygen for use as a propellant and for life support, valuable co-products can be derived from some of the processes. This information is also highlighted in the description of a given process.

Apollo - An advanced fuel fusion power reactor for the 21st century

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulcinski, G.L.; Emmert, G.A.; Blanchard, J.P.

1989-03-01

A preconceptual design of a tokamak reactor fueled by a D-He-3 plasma is presented. A low aspect ratio (A=2-4) device is studied here but high aspect ratio devices (A > 6) may also be quite attractive. The Apollo D-He-3 tokamak capitalizes on recent advances in high field magnets (20 T) and utilizes rectennas to convert the synchrotron radiation directly to electricity. The overall efficiency ranges from 37 to 52% depending on whether the bremsstrahlung energy is utilized. The low neutron wall loading (0.1 MW/m/sup 2/) allows a permanent first wall to be designed and the low nuclear decay heat enablesmore » the reactor to be classed as inherently safe. The cost of electricity from Apollo is > 40% lower than electricity from a similar sized DT reactor.« less

Can we improve the prevention and detection of congenital abnormalities? An audit of early pregnancy care in New Zealand.

PubMed

Arroll, Nicola; Sadler, Lynn; Stone, Peter; Masson, Vicki; Farquhar, Cindy

2013-08-16

To determine whether there were "quality gaps" in the provision of care during pregnancies that resulted in a perinatal death due to congenital abnormality. Perinatal deaths from congenital cardiovascular, central nervous system or chromosomal abnormality in 2010 were identified retrospectively. Data were extracted by retrospective clinical note review and obtained by independent review of ultrasound scans. There were 137 perinatal deaths due to a congenital cardiovascular (35), central nervous system (29) or chromosomal abnormality (73). First contact with a health professional during pregnancy was predominantly with a general practitioner. First contact occurred within 14 weeks in 85% of pregnancies and there was often a significant delay before booking. Folate supplements were taken by 7% pre-conceptually and 54% of women in the antenatal period. There were 20 perinatal deaths from neural tube defects that could potentially have been prevented through the use of pre-conceptual folate. Antenatal screening was offered to 75% of the women who presented prior to 20 weeks and 84% of these undertook at least one of the available antenatal screening tests. Review of ultrasound images found five abnormalities could have been detected earlier. Delay in booking or failure to offer screening early were the most common reasons for delay in diagnosis of screen detectable abnormalities. The preventative value and timing of (pre-conceptual) folate needs emphasis.

AHTR Mechanical, Structural, And Neutronic Preconceptual Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Varma, Venugopal Koikal; Holcomb, David Eugene; Peretz, Fred J

2012-10-01

This report provides an overview of the mechanical, structural, and neutronic aspects of the Advanced High Temperature Reactor (AHTR) design concept. The AHTR is a design concept for a large output Fluoride salt cooled High-temperature Reactor (FHR) that is being developed to enable evaluation of the technology hurdles remaining to be overcome prior to FHRs becoming a commercial reactor class. This report documents the incremental AHTR design maturation performed over the past year and is focused on advancing the design concept to a level of a functional, self-consistent system. The AHTR employs plate type coated particle fuel assemblies with rapid,more » off-line refueling. Neutronic analysis of the core has confirmed the viability of a 6-month 2-batch cycle with 9 weight-percent enriched uranium fuel. Refueling is intended to be performed automatically under visual guidance using dedicated robotic manipulators. The present design intent is for used fuel to be stored inside of containment for at least 6 months and then transferred to local dry wells for intermediate term, on-site storage. The mechanical and structural concept development effort has included an emphasis on transportation and constructability to minimize construction costs and schedule. The design intent is that all components be factory fabricated into rail transportable modules that are assembled into subsystems at an on-site workshop prior to being lifted into position using a heavy-lift crane in an open-top style construction. While detailed accident identification and response sequence analysis has yet to be performed, the design concept incorporates multiple levels of radioactive material containment including fully passive responses to all identified design basis or non-very-low frequency beyond design basis accidents. Key building design elements include: 1) below grade siting to minimize vulnerability to aircraft impact, 2) multiple natural circulation decay heat rejection chimneys, 3) seismic base isolation, and 4) decay heat powered back-up electricity generation. The report provides a preconceptual design of the manipulators, the fuel transfer system, and the salt transfer loops. The mechanical handling of the fuel and how it is accomplished without instrumentation inside the salt is described within the report. All drives for the manipulators reside outside the reactor top flange. The design has also taken into account the transportability of major components and how they will be assembled on site« less

K basins sludge removal sludge pretreatment system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, H.L.

1997-06-12

The Spent Nuclear Fuels Program is in the process of planning activities to remove spent nuclear fuel and other materials from the 100-K Basins as a remediation effort for clean closure. The 105 K- East and K-West Basins store spent fuel, sludge, and debris. Sludge has accumulated in the 1 00 K Basins as a result of fuel oxidation and a slight amount of general debris being deposited, by settling, in the basin water. The ultimate intent in removing the sludge and fuel is to eliminate the environmental risk posed by storing fuel at the K Basins. The task formore » this project is to disposition specific constituents of sludge (metallic fuel) to produce a product stream through a pretreatment process that will meet the requirements, including a final particle size acceptable to the Tank Waste Remediation System (TWRS). The purpose of this task is to develop a preconceptual design package for the K Basin sludge pretreatment system. The process equipment/system is at a preconceptual stage, as shown in sketch ES-SNF-01 , while a more refined process system and material/energy balances are ongoing (all sketches are shown in Appendix C). Thus, the overall process and 0535 associated equipment have been conservatively selected and sized, respectively, to establish the cost basis and equipment layout as shown in sketches ES- SNF-02 through 08.« less

Preconceptual design of a fluoride high temperature salt-cooled engineering demonstration reactor: Motivation and overview

DOE PAGES

Qualls, A. Louis; Betzler, Benjamin R.; Brown, Nicholas R.; ...

2016-12-21

Engineering demonstration reactors are nuclear reactors built to establish proof of concept for technology options that have never been built. Examples of engineering demonstration reactors include Peach Bottom 1 for high temperature gas-cooled reactors (HTGRs) and Experimental Breeder Reactor-II (EBR-II) for sodium-cooled fast reactors. Historically, engineering demonstrations have played a vital role in advancing the technology readiness level of reactor technologies. Our paper details a preconceptual design for a fluoride salt-cooled engineering demonstration reactor. The fluoride salt-cooled high-temperature reactor (FHR) demonstration reactor (DR) is a concept for a salt-cooled reactor with 100 megawatts of thermal output (MWt). It would usemore » tristructural-isotropic (TRISO) particle fuel within prismatic graphite blocks. FLiBe (2 7LiF-BeF2) is the reference primary coolant. The FHR DR is designed to be small, simple, and affordable. Development of the FHR DR is a necessary intermediate step to enable near-term commercial FHRs. The design philosophy of the FHR DR was focused on safety, near-term deployment, and flexibility. Lower risk technologies are purposely included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated as an engineering demonstration with minimal risk and cost. These technologies include TRISO particle fuel, replaceable core structures, and consistent structural material selection for core structures and the primary and intermediate loops, and tube-and-shell primary-to-intermediate heat exchangers. Important capabilities to be demonstrated by building and operating the FHR DR include fabrication and operation of high temperature reactors; heat exchanger performance (including passive decay heat removal); pump performance; and reactivity control; salt chemistry control to maximize vessel life; tritium management; core design methodologies; salt procurement, handling, maintenance and ultimate disposal. It is recognized that non-nuclear separate and integral test efforts (e.g., heated salt loops or loops using simulant fluids) are necessary to develop the technologies that will be demonstrated in the FHR DR.« less

Preconceptual design of a fluoride high temperature salt-cooled engineering demonstration reactor: Motivation and overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qualls, A. Louis; Betzler, Benjamin R.; Brown, Nicholas R.

Engineering demonstration reactors are nuclear reactors built to establish proof of concept for technology options that have never been built. Examples of engineering demonstration reactors include Peach Bottom 1 for high temperature gas-cooled reactors (HTGRs) and Experimental Breeder Reactor-II (EBR-II) for sodium-cooled fast reactors. Historically, engineering demonstrations have played a vital role in advancing the technology readiness level of reactor technologies. Our paper details a preconceptual design for a fluoride salt-cooled engineering demonstration reactor. The fluoride salt-cooled high-temperature reactor (FHR) demonstration reactor (DR) is a concept for a salt-cooled reactor with 100 megawatts of thermal output (MWt). It would usemore » tristructural-isotropic (TRISO) particle fuel within prismatic graphite blocks. FLiBe (2 7LiF-BeF2) is the reference primary coolant. The FHR DR is designed to be small, simple, and affordable. Development of the FHR DR is a necessary intermediate step to enable near-term commercial FHRs. The design philosophy of the FHR DR was focused on safety, near-term deployment, and flexibility. Lower risk technologies are purposely included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated as an engineering demonstration with minimal risk and cost. These technologies include TRISO particle fuel, replaceable core structures, and consistent structural material selection for core structures and the primary and intermediate loops, and tube-and-shell primary-to-intermediate heat exchangers. Important capabilities to be demonstrated by building and operating the FHR DR include fabrication and operation of high temperature reactors; heat exchanger performance (including passive decay heat removal); pump performance; and reactivity control; salt chemistry control to maximize vessel life; tritium management; core design methodologies; salt procurement, handling, maintenance and ultimate disposal. It is recognized that non-nuclear separate and integral test efforts (e.g., heated salt loops or loops using simulant fluids) are necessary to develop the technologies that will be demonstrated in the FHR DR.« less

Accelerator-based conversion (ABC) of weapons plutonium: Plant layout study and related design issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cowell, B.S.; Fontana, M.H.; Krakowski, R.A.

1995-04-01

In preparation for and in support of a detailed R and D Plan for the Accelerator-Based Conversion (ABC) of weapons plutonium, an ABC Plant Layout Study was conducted at the level of a pre-conceptual engineering design. The plant layout is based on an adaptation of the Molten-Salt Breeder Reactor (MSBR) detailed conceptual design that was completed in the early 1070s. Although the ABC Plant Layout Study included the Accelerator Equipment as an essential element, the engineering assessment focused primarily on the Target; Primary System (blanket and all systems containing plutonium-bearing fuel salt); the Heat-Removal System (secondary-coolant-salt and supercritical-steam systems); Chemicalmore » Processing; Operation and Maintenance; Containment and Safety; and Instrumentation and Control systems. Although constrained primarily to a reflection of an accelerator-driven (subcritical) variant of MSBR system, unique features and added flexibilities of the ABC suggest improved or alternative approaches to each of the above-listed subsystems; these, along with the key technical issues in need of resolution through a detailed R&D plan for ABC are described on the bases of the ``strawman`` or ``point-of-departure`` plant layout that resulted from this study.« less

A cognitive perspective on object relations, drive development and ego structure in the second and third years of life.

PubMed

Posener, J A

1989-01-01

This paper extends a recent line of research by correlating Piaget's theory of cognitive development with several psychoanalytic perspectives on development during the second and third years of life. The concrete, imagistic, unintegrated nature of mental representations associated by Mahler and Kernberg with this period, along with the mental operation of splitting, are related to preconceptual representation, a cognitive mode described by Piaget. Psychoanalytic perspectives on the body ego and object world associated with the anal period are also seen to involve concrete, unintegrated representations which show correspondence with preconceptual cognition. Parallels are explored between cognitive stages and the psychoanalytic understanding of ego and superego development. While psychoanalysis is not a cognitive psychology, aspects of its theory are concerned with cognitive structure and are enriched by a consideration of cognitive development.

In service inspection and repair of sodium cooled ASTRID prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baque, F.; Jadot, F.; Marlier, R.

2015-07-01

In the frame of the large R and D work which is performed for the future ASTRID sodium cooled prototype, In Service Inspection and Repair (ISI and R) has been identified as a major issue to be taken into account in order to enlarge the plant safety, to consolidate its availability and to protect the associated investment. After the first part of pre-conceptual design phase (2008-2012), the running second part of pre-conceptual phase (2013-2015) allows to increase the ISI and R tool ability for immersed sodium structures of ASTRID, at about 200 deg. C, on the basis of consolidated specificationsmore » and thanks to their qualification through more and more realistic laboratory tests and simulation with CIVA code. ISI and R items are being developed and qualified during a pluri-annual program which mainly deals with the reactor block structures, the primary components and circuit, and the Power Conversion System. It ensures a strong connection between the reactor designers and inspection specialists, as the optimization of inspectability and repairability is looked at: this already induced specific rules for design, in order to shorten and ease the ISI and R operations, which have been merged into RCC-MRx rules. In the frame of increasing technology readiness level with corresponding performance demonstration, this paper presents R and D dealing with the ISI and R items: it highlights the sensor development (both ultrasonic and electromagnetic concepts, compatible with sodium at 200 deg. C), then their applications for ASTRID structure control (under sodium telemetry, imaging and NDE). Activity for repair is also presented (a single laser tool for sodium sweeping, machining and welding), and finally the effort for associated robotic (generic program for ASTRID applications, specific technological tools for sodium medium, tight immersed bell). The main results of testing and simulation are given for telemetry, vision, NDE applications, laser process repair and under sodium sealing. (authors)« less

Environmental Exposure of Sperm Sex-Chromosomes: A Gender Selection Technique.

PubMed

Oyeyipo, Ibukun P; van der Linde, Michelle; du Plessis, Stefan S

2017-10-01

Preconceptual sex selection is still a highly debatable process whereby X- and Y-chromosome-bearing spermatozoa are isolated prior to fertilization of the oocyte. Although various separation techniques are available, none can guarantee 100% accuracy. The aim of this study was to separate X- and Y-chromosome-bearing spermatozoa using methods based on the viability difference between the X- and Y-chromosome-bearing spermatozoa. A total of 18 experimental semen samples were used, written consent was obtained from all donors and results were analysed in a blinded fashion. Spermatozoa were exposed to different pH values (5.5, 6.5, 7.5, 8.5, and 9.5), increased temperatures (37°C, 41°C, and 45°C) and ROS level (50 μM, 750 μM, and 1,000 μM). The live and dead cell separation was done through a modified swim-up technique. Changes in the sex-chromosome ratio of samples were established by double-label fluorescent in situ hybridization (FISH) before and after processing. The results indicated successful enrichment of Xchromosome-bearing spermatozoa upon incubation in acidic media, increased temperatures, and elevated H 2 O 2 . This study demonstrated the potential role for exploring the physiological differences between X-and Y-chromosome-bearing spermatozoa in the development of preconceptual gender selection.

Performance and Fabrication Status of TREAT LEU Conversion Conceptual Design Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

IJ van Rooyen; SR Morrell; AE Wright

2014-10-01

Resumption of transient testing at the TREAT facility was approved in February 2014 to meet U.S. Department of Energy (DOE) objectives. The National Nuclear Security Administration’s Global Threat Reduction Initiative Convert Program is evaluating conversion of TREAT from its existing highly enriched uranium (HEU) core to a new core containing low enriched uranium (LEU). This paper describes briefly the initial pre-conceptual designs screening decisions with more detailed discussions on current feasibility, qualification and fabrication approaches. Feasible fabrication will be shown for a LEU fuel element assembly that can meet TREAT design, performance, and safety requirements. The statement of feasibility recognizesmore » that further development, analysis, and testing must be completed to refine the conceptual design. Engineering challenges such as cladding oxidation, high temperature material properties, and fuel block fabrication along with neutronics performance, will be highlighted. Preliminary engineering and supply chain evaluation provided confidence that the conceptual designs can be achieved.« less

Teaching Materials and Methods.

ERIC Educational Resources Information Center

Physiologist, 1987

1987-01-01

Contains abstracts of presented papers which deal with teaching materials and methods in physiology. Includes papers on preconceptual notions in physiology, somatosensory activity recorded in the dorsal root ganglion of the bull frog, and the use of the Apple Macintosh microcomputer in teaching human anatomy and physiology. (TW)

Maternal effects and cancer risk in the progeny of mice exposed to X-rays before conception.

PubMed

Dasenbrock, Clemens; Tillmann, Thomas; Ernst, Heinrich; Behnke, Wolfgang; Kellner, Rupert; Hagemann, Gerd; Kaever, Volkhard; Kohler, Manfred; Rittinghausen, Susanne; Mohr, Ulrich; Tomatis, Lorenzo

2005-04-01

To investigate in an animal model whether preconceptual X-ray exposure leads to an altered tumor rate and spectrum in the offspring, a transgeneration carcinogenesis study was carried out. Female mice received X-ray irradiation (2 x 2 Gray) 2 weeks prior to mating with untreated males. After weaning, half of the descendants were exposed for 6 months to the immunomodulating and tumor-promoting compound cyclosporine A (CsA) by diet, the others remained untreated. The animals were maintained for their entire lifespan, terminal sacrifices were carried out after 28 months. Complete autopsy was performed, and three protocol organs (lung, liver and spleen) were examined histologically, together with any suspicious lesions in other organs. Fertility and the lifetime of the maternal mice were reduced by the X-ray irradiation, and their incidence of lung and liver tumors was increased as compared to non-irradiated mice. The descendants of all groups revealed comparable body weights and mortality rates. The incidence of hematopoietic/lymphoreticular tissue tumors increased in the female hybrids by 6 months of CsA-treatment. A higher incidence of lung and liver tumors in the sham-treated male progeny of irradiated mothers was detected, pointing to a possible germ cell-transmitted alteration initiated by the preconceptual maternal X-ray exposure.

Toward pre-conceptual genetic analysis of human spermatozoa.

PubMed

Dozortsev, Dmitri; Serafim, Rui; Cardoso, J Jakson; Abdelmassih, Soraya; Nagy, Peter; Diamond, Michael P; Abdelmassih, Roger

2003-01-01

Nuclei of mature mammalian spermatozoa are extraordinarily resistant to chemical and thermal injury. Additionally, decondensation of spermatozoa DNA can be accompanied by little or no visual changes of the sperm head. This study tested whether human spermatozoa could be recovered following several cycles of primer extension preamplification (PEP) and used to achieve fertilization and subsequent development of human oocytes. An attempt was also made to amplify PEP buffer after spermatozoon removal. The results demonstrate that the sperm head can be successfully recovered following treatment with KOH or proteinase K followed by one to four cycles of PEP. It is also shown that following this treatment, the spermatozoa can be injected into the oocytes and will transform into a pronucleus if the oocyte is activated by sperm cytosolic fraction. In some cases, it was also possible to obtain polymerase chain reaction signals using a buffer after sperm cells were removed following several cycles of PEP. Although sperm participation in development was confirmed by fluorescence in-situ hybridization, light microscopy revealed some degree of damage to spermatozoal chromosomes. It is concluded that pre-conceptual analysis of sperm cells may be possible, but more research is necessary to determine the optimal conditions that would preserve sperm DNA integrity while allowing accurate diagnoses.

Progress in magnet design activities for the material plasma exposure experiment

DOE PAGES

Duckworth, Robert; Lumsdaine, Arnold; Rapp, Juergen; ...

2017-07-01

One of the critical challenges for the development of next generation fusion facilities, such as a Fusion Nuclear Science Facility (FNSF) or DEMO, is the understanding of plasma material interactions (PMI). Making progress in PMI research will require integrated facilities that can provide the types of conditions that will be seen in the first wall and divertor regions of future fusion facilities. In order to meet this need, a new linear plasma facility, the Materials Plasma Exposure Experiment (MPEX), is proposed. In order to generate high ion fluence to simulate fusion divertor conditions, a steady-state plasma will be generated andmore » confined with superconducting magnets. Finally, the on-axis fields will range from 1 to 2.5 T in order to meet the requirements of the various plasma source and heating systems. Details on the pre-conceptual design of the magnets and cryogenic system are presented.« less

Preventing Alcohol-Exposed Pregnancy among American-Indian Youth

ERIC Educational Resources Information Center

Jensen, Jamie; Kenyon, DenYelle Baete; Hanson, Jessica D.

2016-01-01

Research has determined that the prevention of alcohol-exposed pregnancies (AEP) must occur preconceptually, either by reducing alcohol intake in women planning pregnancy or at risk for becoming pregnant, or by preventing pregnancy in women drinking at risky levels. One such AEP prevention programme with non-pregnant American-Indian (AI) women is…

Adversity before Conception Will Affect Adult Progeny in Rats

ERIC Educational Resources Information Center

Shachar-Dadon, Alice; Schulkin, Jay; Leshem, Micah

2009-01-01

The authors investigated whether adversity in a female, before she conceives, will influence the affective and social behavior of her progeny. Virgin female rats were either undisturbed (controls) or exposed to varied, unpredictable, stressors for 7 days (preconceptual stress [PCS]) and then either mated immediately after the end of the stress…

Neutronics Evaluation of Lithium-Based Ternary Alloys in IFE Blankets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jolodosky, A.; Fratoni, M.

2014-11-20

Pre-conceptual fusion blanket designs require research and development to reflect important proposed changes in the design of essential systems, and the new challenges they impose on related fuel cycle systems. One attractive feature of using liquid lithium as the breeder and coolant is that it has very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns. If the chemical reactivity of lithium could be overcome, the result would have a profound impact on fusion energy and associated safety basis.more » The overriding goal of this project is to develop a lithium-based alloy that maintains beneficial properties of lithium (e.g. high tritium breeding and solubility) while reducing overall flammability concerns. To minimize the number of alloy combinations that must be explored, only those alloys that meet certain nuclear performance metrics will be considered for subsequent thermodynamic study. The specific scope of this study is to evaluate the neutronics performance of lithium-based alloys in the blanket of an inertial confinement fusion (ICF) engine. The results of this study will inform the development of lithium alloys that would guarantee acceptable neutronics performance while mitigating the chemical reactivity issues of pure lithium.« less

In Search of Our Beginnings: Locating 'Firstness' in Arts Education in the Service of Advocacy

ERIC Educational Resources Information Center

Campbell, Cary

2018-01-01

Attention to sub-conscious and pre-conceptual cognition is often neglected in educational research and theory, which, through failing to adequately conceptualize the emergence of perceptual learning, often inadvertently privileges a narrow and disembodied approach that emphasizes 'abstract symbolic processing' at the expense of more sensory forms…

The light ion pulsed power induction accelerator for ETF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mazarakis, M.G.; Olson, R.E.; Olson, C.L.

1994-12-31

Our Engineering Test Facility (ETF) driver concept is based on HERMES III and RHEPP technologies. Actually, it is a scaled-down version of the LMF design incorporating repetition rate capabilities of up to 10 Hz CW. The preconceptual design presented here provides 200-TW peak power to the ETF target during 10 ns, equal to 2-MJ total ion beam energy. Linear inductive voltage addition driving a self-magnetically insulated transmission line (MITL) is utilized to generate the 36-MV peak voltage needed for lithium ion beams. The {approximately} 3-MA ion current is achieved by utilizing many accelerating modules in parallel. Since the current permore » module is relatively modest ({approximately}300 kA), two-stage or one-stage extraction diodes can be utilized for the generation of singly charged lithium ions. The accelerating modules are arranged symmetrically around the fusion chamber in order to provide uniform irradiation onto the ETF target. In addition, the modules are fired in a programmed sequence in order to generate the optimum power pulse shape onto the target. This design utilizes RHEPP accelerator modules as the principal power source.« less

The Relationship of Piaget's Stages of Cognitive Development to First Grade Reading Achievement.

ERIC Educational Resources Information Center

Borucki, Diane Marie

The relationship between level of cognitive functioning at the beginning of first grade and level of reading achievement at the end of first grade was investigated in a sample of 325 children. The EITS Concept Assessment Kit-Conservation was used to classify the children as being in the preconceptual stage, the intuitive stage, or the concrete…

"But I'm Not a Racist!" Phenomenology, Racism, and the Body Schema in White, Pre-Service Teacher Education

ERIC Educational Resources Information Center

Lewis, Tyson E.

2018-01-01

In this article, I call for a phenomenological turn in educating white, pre-service teachers. As opposed to dominant pedagogical models which focus on changing one's beliefs about race, phenomenology points toward the importance of pre-conceptual, pre-critical forms of racial embodiment. Here I draw upon recent work on the different between body…

Why some women do not breast feed: bottle feeding and fathers' role.

PubMed

Earle, S

2000-12-01

To explore women's experiences and perceptions of baby feeding and to explore the explanations offered by women who choose to either breast or bottle feed. A qualitative study, which was prospective in design. Participants were interviewed three times: the first stage was between six and 14 weeks of pregnancy; the second stage was between 34 and 39 weeks; and the third stage was between six and 14 weeks after childbirth. 19 participants were recruited to the study group via 12 antenatal clinics in Coventry, UK. The data indicate that participants make baby-feeding decisions either prior to conception or early in the pregnancy. Findings also indicate that both breast and bottle feeders possessed knowledge of the benefits of breast feeding, but this did not seem to influence decision making. One of the most significant factors influencing the decision to bottle feed appears to be a desire for paternal involvement. To increase the incidence of breast feeding, health-care professionals should consider the need for preconceptual health promotion. The role of paternal involvement in baby-feeding decisions also needs to be acknowledged and men need to be included in breast-feeding promotion campaigns.

Preconceptional antithyroid peroxidase antibodies, but not thyroid-stimulating hormone, are associated with decreased live birth rates in infertile women.

PubMed

Seungdamrong, Aimee; Steiner, Anne Z; Gracia, Clarisa R; Legro, Richard S; Diamond, Michael P; Coutifaris, Christos; Schlaff, William D; Casson, Peter; Christman, Gregory M; Robinson, Randal D; Huang, Hao; Alvero, Ruben; Hansen, Karl R; Jin, Susan; Eisenberg, Esther; Zhang, Heping; Santoro, Nanette

2017-10-25

To study whether preconceptual thyroid-stimulating hormone (TSH) and antithyroid peroxidase (TPO) antibodies are associated with poor reproductive outcomes in infertile women. Secondary analysis of data from two multicenter, randomized, controlled trials conducted by the Reproductive Medicine Network of the Eunice Kennedy Shriver National Institute of Child Health and Human Development. Multivariable logistic regression analyses were performed to assess the association between preconceptual TSH levels and anti-TPO antibodies. Not applicable. Serum samples from 1,468 infertile women were utilized. None. Cumulative conception, clinical pregnancy, miscarriage, and live birth rates were calculated. Conception, clinical pregnancy, miscarriage, and live birth rates did not differ between patients with TSH ≥2.5 mIU/L vs. TSH < 2.5 mIU/L. Women with anti-TPO antibodies had similar conception rates (33.3% vs. 36.3%) but higher miscarriage rates (43.9% vs. 25.3%) and lower live birth rates (17.1% vs. 25.4%) than those without anti-TPO antibodies. Adjusted, multivariable logistic regression models confirmed elevated odds of miscarriage (odds ratio 2.17, 95% confidence interval 1.12-4.22) and lower odds of live birth (oddr ratio 0.58, 95% confidence interval 0.35-0.96) in patients with anti-TPO antibodies. In infertile women, preconceptional TSH ≥2.5 mIU/L is not associated with adverse reproductive outcomes; however, anti-TPO antibodies are associated with increased risk of miscarriage and decreased probability of live birth. PPCOS II NCT00719186; AMIGOS NCT01044862. Copyright © 2017. Published by Elsevier Inc.

Crawler Acquisition and Testing Demonstration Project Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

DEFIGH-PRICE, C.

2000-10-23

If the crawler based retrieval system is selected, this project management plan identifies the path forward for acquiring a crawler/track pump waste retrieval system, and completing sufficient testing to support deploying the crawler for as part of a retrieval technology demonstration for Tank 241-C-104. In the balance of the document, these activities will be referred to as the Crawler Acquisition and Testing Demonstration. During recent Tri-Party Agreement negotiations, TPA milestones were proposed for a sludge/hard heel waste retrieval demonstration in tank C-104. Specifically one of the proposed milestones requires completion of a cold demonstration of sufficient scale to support finalmore » design and testing of the equipment (M-45-03G) by 6/30/2004. A crawler-based retrieval system was one of the two options evaluated during the pre-conceptual engineering for C-104 retrieval (RPP-6843 Rev. 0). The alternative technology procurement initiated by the Hanford Tanks Initiative (HTI) project, combined with the pre-conceptual engineering for C-104 retrieval provide an opportunity to achieve compliance with the proposed TPA milestone M-45-03H. This Crawler Acquisition and Testing Demonstration project management plan identifies the plans, organizational interfaces and responsibilities, management control systems, reporting systems, timeline and requirements for the acquisition and testing of the crawler based retrieval system. This project management plan is complimentary to and supportive of the Project Management Plan for Retrieval of C-104 (RPP-6557). This project management plan focuses on utilizing and completing the efforts initiated under the Hanford Tanks Initiative (HTI) to acquire and cold test a commercial crawler based retrieval system. The crawler-based retrieval system will be purchased on a schedule to support design of the waste retrieval from tank C-104 (project W-523) and to meet the requirement of proposed TPA milestone M-45-03H. This Crawler Acquisition and Testing Demonstration project management plan includes the following: (1) Identification of acquisition strategy and plan to obtain a crawler based retrieval system; (2) Plan for sufficient cold testing to make a decision for W-523 and to comply with TPA Milestone M-45-03H; (3) Cost and schedule for path forward; (4) Responsibilities of the participants; and (5) The plan is supported by updated Level 1 logics, a Relative Order of Magnitude cost estimate and preliminary project schedule.« less

10 CFR 830 Major Modification Determination for the ATR Diesel Bus (E-3) and Switchgear Replacement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noel Duckwtiz

2011-05-01

Near term replacement of aging and obsolescent original ATR equipment has become important to ensure ATR capability in support of NE’s long term national missions. To that end, a mission needs statement has been prepared for a non-major system acquisition which is comprised of three interdependent subprojects. The first project, subject of this determination, will replace the existent diesel-electrical bus (E-3) and associated switchgear. More specifically, INL proposes transitioning ATR to 100% commercial power with appropriate emergency backup to include: • Provide commercial power as the normal source of power to the ATR loads currently supplied by diesel-electric power. •more » Provide backup power to the critical ATR loads in the event of a loss of commercial power. • Replace obsolescent critical ATR power distribution equipment, e.g., switchgear, transformers, motor control centers, distribution panels. Completion of this and two other age-related projects (primary coolant pump and motor replacement and emergency firewater injection system replacement) will resolve major age related operational issues plus make a significant contribution in sustaining the ATR safety and reliability profile. The major modification criteria evaluation of the project pre-conceptual design identified several issues make the project a major modification: 1. Evaluation Criteria #2 (Footprint change). The addition of a new PC-4 structure to the ATR Facility to house safety-related SSCs requires careful attention to maintaining adherence to applicable engineering and nuclear safety design criteria (e.g., structural qualification, fire suppression) to ensure no adverse impacts to the safety-related functions of the housed equipment. 2. Evaluation Criteria #3 (Change of existing process). The change to the strategy for providing continuous reliable power to the safety-related emergency coolant pumps requires careful attention and analysis to ensure it meets a project primary object to maintain or reduce CDF and does not negatively affect the efficacy of the currently approved strategy. 3. Evaluation Criteria #5 (Create the need for new or revised safety SSCs). The change to the strategy for providing continuous reliable power to the safety-related emergency coolant pumps, based on the pre-conceptual design, will require the addition of two quick start diesel generators, their associated power coordination/distribution controls, and a UPS to the list of safety-related SSCs. Similarly to item 1 above, the addition of these active SSCs to the list of safety-related SSCs and replacement of the E-3 bus requires careful attention to maintaining adherence to applicable engineering and nuclear safety design criteria (e.g., seismic qualification, isolation of redundant trains from common fault failures) to ensure no adverse impacts to the safety-related functions.« less

Possibility for ultra-bright electron beam acceleration in dielectric wakefield accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simakov, Evgenya I.; Carlsten, Bruce E.; Shchegolkov, Dmitry Yu.

2012-12-21

We describe a conceptual proposal to combine the Dielectric Wakefield Accelerator (DWA) with the Emittance Exchanger (EEX) to demonstrate a high-brightness DWA with a gradient of above 100 MV/m and less than 0.1% induced energy spread in the accelerated beam. We currently evaluate the DWA concept as a performance upgrade for the future LANL signature facility MaRIE with the goal of significantly reducing the electron beam energy spread. The preconceptual design for MaRIE is underway at LANL, with the design of the electron linear accelerator being one of the main research goals. Although generally the baseline design needs to bemore » conservative and rely on existing technology, any future upgrade would immediately call for looking into the advanced accelerator concepts capable of boosting the electron beam energy up by a few GeV in a very short distance without degrading the beam's quality. Scoping studies have identified large induced energy spreads as the major cause of beam quality degradation in high-gradient advanced accelerators for free-electron lasers. We describe simulations demonstrating that trapezoidal bunch shapes can be used in a DWA to greatly reduce the induced beam energy spread, and, in doing so, also preserve the beam brightness at levels never previously achieved. This concept has the potential to advance DWA technology to a level that would make it suitable for the upgrades of the proposed Los Alamos MaRIE signature facility.« less

Non-invasive paper-based microfluidic device for ultra-low detection of urea through enzyme catalysis

NASA Astrophysics Data System (ADS)

Suresh, Vignesh; Qunya, Ong; Kanta, Bera Lakshmi; Yuh, Lee Yeong; Chong, Karen S. L.

2018-03-01

This work describes the design, fabrication and characterization of a paper-based microfluidic device for ultra-low detection of urea through enzyme catalysis. The microfluidic system comprises an entry port, a fluidic channel, a reaction zone and two electrodes (contacts). Wax printing was used to create fluidic channels on the surface of a chromatography paper. Pre-conceptualized designs of the fluidic channel are wax-printed on the paper substrate while the electrodes are screen-printed. The paper printed with wax is heated to cause the wax reflow along the thickness of the paper that selectively creates hydrophilic and hydrophobic zones inside the paper. Urease immobilized in the reaction zone catalyses urea into releasing ions and, thereby, generating a current flow between the electrodes. A measure of current with respect to time at a fixed potential enables the detection of urea. The methodology enabled urea concentration down to 1 pM to be detected. The significance of this work lies in the use of simple and inexpensive paper-based substrates to achieve detection of ultra-low concentrations of analytes such as urea. The process is non-invasive and employs a less cumbersome two-electrode assembly.

Thyroglobulin level at week 16 of pregnancy is superior to urinary iodine concentration in revealing preconceptual and first trimester iodine supply

PubMed Central

Katko, Monika; Gazso, Andrea Anett; Hircsu, Ildiko; Bhattoa, Harjit Pal; Molnar, Zsuzsanna; Kovacs, Bela; Andrasi, David; Aranyosi, Janos; Makai, Rita; Veress, Lajos; Torok, Olga; Bodor, Miklos; Samson, Laszlo

2017-01-01

Abstract Pregnant women are prone to iodine deficiency due to the increased need for iodine during gestation. Progress has recently occurred in establishing serum thyroglobulin (Tg) as an iodine status biomarker, but there is no accepted reference range for iodine sufficiency during pregnancy. An observational study was conducted in 164 pregnant women. At week 16 of gestation urinary iodine concentration (UIC), serum Tg, and thyroid functions were measured, and information on the type of iodine supplementation and smoking were recorded. The parameters of those who started iodine supplementation (≥150 μg/day) at least 4 weeks before pregnancy (n = 27), who started at the detection of pregnancy (n = 51), and who had no iodine supplementation (n = 74) were compared. Sufficient iodine supply was found in the studied population based on median UIC (162 μg/L). Iodine supplementation ≥150 μg/day resulted in higher median UIC regardless of its duration (nonusers: 130 μg/L vs. prepregnancy iodine starters: 240 μg/L, and pregnancy iodine starters: 205 μg/L, p < .001, and p = .023, respectively). Median Tg value of pregnancy starters was identical to that of nonusers (14.5 vs. 14.6 μg/L), whereas prepregnancy starters had lower median Tg (9.1 μg/L, p = .018). Serum Tg concentration at week 16 of pregnancy showed negative relationship (p = .010) with duration of iodine supplementation and positive relationship (p = .008) with smoking, a known interfering factor of iodine metabolism, by multiple regression analysis. Serum Tg at week 16 of pregnancy may be a promising biomarker of preconceptual and first trimester maternal iodine status, the critical early phase of foetal brain development. PMID:28593684

Waste Treatment And Immobilization Plant U. S. Department Of Energy Office Of River Protection Submerged Bed Scrubber Condensate Disposition Project - Abstract # 13460

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yanochko, Ronald M; Corcoran, Connie

The Hanford Waste Treatment and Immobilization Plant (WTP) will generate an off-gas treatment system secondary liquid waste stream [submerged bed scrubber (SBS) condensate], which is currently planned for recycle back to the WTP Low Activity Waste (LAW) melter. This SBS condensate waste stream is high in Tc-99, which is not efficiently captured in the vitrified glass matrix. A pre-conceptual engineering study was prepared in fiscal year 2012 to evaluate alternate flow paths for melter off-gas secondary liquid waste generated by the WTP LAW facility. This study evaluated alternatives for direct off-site disposal of this SBS without pre-treatment, which mitigates potentialmore » issues associated with recycling.« less

Management of pregnancy in women with type 1 diabetes mellitus: guidelines of the French-Speaking Diabetes Society (Société francophone du diabète [SFD]).

PubMed

Bismuth, E; Bouche, C; Caliman, C; Lepercq, J; Lubin, V; Rouge, D; Timsit, J; Vambergue, A

2012-06-01

The clinical guidelines reported by the French-Speaking Diabetes Society (Société francophone du diabète) include updated recommendations for preconceptual planning and care in the management of pregnancy in women with type 1 diabetes mellitus (T1DM). The working group included diabetologists, as well as an obstetrician, a nurse and a dietician. A review of the literature was performed using PubMed and Cochrane databases. Guidelines published by foreign diabetes societies were also consulted. In women with T1DM, pregnancy increased the risks of hypoglycaemia, diabetic ketoacidosis, pregnancy-induced hypertension, infections and worsening of diabetic microvascular disease. Moreover, T1DM during pregnancy had an impact on the embryo and the fetus, and may have increased the risk of spontaneous miscarriages, malformations, premature births, and fetal and neonatal complications. However, intensive glycaemic control and preconceptual care have been shown to decrease the rate of fetal demise and malformations. Also, the use of insulin analogues during pregnancy is now regarded as safe. Tight glucose control and frequent follow-up are recommended throughout pregnancy in women with T1DM. Their obstetric management should take place in a maternity hospital with an appropriate perinatal environment and in close collaboration with diabetologists. Pregnancy planning and adequate management during pregnancy are mandatory for improving the outcomes of women with T1DM. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

The savant syndrome: intellectual impairment and exceptional skill.

PubMed

Miller, L K

1999-01-01

Occasionally, people with developmental disability display skills at a level inconsistent with their general intellectual functioning, so-called "savant" behavior. Studies of savant behavior are reviewed to determine their relevance to notions about the importance of general intellective functions in the development of exceptional skill. It is concluded that (a) the skill exhibited by savants shares many characteristics with that in people without disability, (b) the skill is usually accompanied by normative levels of performance on at least some subtests of standardized measures of cognitive achievement, and (c) it is unclear whether savants have distinctive cognitive strengths or motivational dispositions, though their relative prevalence among people with certain kinds of disability suggests predisposing constraints. The author proposes that these skills typically reflect highly elaborated preconceptual representational systems.

LIFE: a sustainable solution for developing safe, clean fusion power.

PubMed

Reyes, Susana; Dunne, Mike; Kramer, Kevin; Anklam, Tom; Havstad, Mark; Mazuecos, Antonio Lafuente; Miles, Robin; Martinez-Frias, Joel; Deri, Bob

2013-06-01

The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory (LLNL) in California is currently in operation with the goal to demonstrate fusion energy gain for the first time in the laboratory-also referred to as "ignition." Based on these demonstration experiments, the Laser Inertial Fusion Energy (LIFE) power plant is being designed at LLNL in partnership with other institutions with the goal to deliver baseload electricity from safe, secure, sustainable fusion power in a time scale that is consistent with the energy market needs. For this purpose, the LIFE design takes advantage of recent advances in diode-pumped, solid-state laser technology and adopts the paradigm of Line Replaceable Units used on the NIF to provide high levels of availability and maintainability and mitigate the need for advanced materials development. The LIFE market entry plant will demonstrate the feasibility of a closed fusion fuel cycle, including tritium breeding, extraction, processing, refueling, accountability, and safety, in a steady-state power-producing device. While many fusion plant designs require large quantities of tritium for startup and operations, a range of design choices made for the LIFE fuel cycle act to reduce the in-process tritium inventory. This paper presents an overview of the delivery plan and the preconceptual design of the LIFE facility with emphasis on the key safety design principles being adopted. In order to illustrate the favorable safety characteristics of the LIFE design, some initial accident analysis results are presented that indicate potential for a more attractive licensing regime than that of current fission reactors.

Breast milk is conditionally perfect.

PubMed

Erick, Miriam

2018-02-01

Breast milk is the universal preferred nutrition for the newborn human infant. New mother have been encouraged to exclusively breastfeed by health care professionals and consumer-advocacy forums for years, citing "breast milk is the perfect food". The benefits are numerous and include psychological, convenience, economical, ecological and nutritionally superior. Human milk is a composite of nutritional choices of the mother, commencing in the pre-conceptual era. Events influencing the eventual nutritional profile of breast milk for the neonate start with pre-conceptual dietary habits through pregnancy and finally to postpartum. Food choices do affect the nutritional profile of human breast milk. It is not known who coined the phrase "breast milk is the perfect food" but it is widely prevalent in the literature. While breast milk is highly nutritive, containing important immunological and growth factors, scientific investigation reveals a few short-falls. Overall, human breast milk has been found to be low in certain nutrients in developed countries: vitamin D, iodine, iron, and vitamin K. Additional nutrient deficiencies have been documented in resource-poor countries: vitamin A, vitamin B 12, zinc, and vitamin B 1/thiamin. Given these findings, isn't it more accurate to describe breast milk as "conditionally perfect"? Correcting the impression that breast milk is an inherently, automatically comprehensive enriched product would encourage women who plan to breastfeed an opportunity to concentrate on dietary improvement to optimizes nutrient benefits ultimately to the neonate. The more immediate result would improve pre-conceptual nutritional status. Here, we explore the nutritional status of groups of young women; some of whom will become pregnant and eventually produce breast milk. We will review the available literature profiling vitamin, mineral, protein and caloric content of breast milk. We highlight pre-existing situations needing correction to optimize conception and fetal development. While alternative forms of infant nutrition carry standard product labels of nutrient adequacy, this information does not apply universally to all breast milk. Infant formulas are fortified with various amounts of vitamins, minerals, supplemental protein concentrates, nucleic factors, omega 3 fatty acids and any important new nutritional finding. Infant formulas are manufactured to be consistent in composition and are monitored closely for quality. Not true for human breast milk. Any nutrient deficiency existing in pregnancy will ultimately be carried forward via lactation. It is a biological impossibility for a lactating woman to transfer nutrients via breast milk she does not have! Copyright © 2017 Elsevier Ltd. All rights reserved.

Rationale, design, methodology and sample characteristics for the Vietnam pre-conceptual micronutrient supplementation trial (PRECONCEPT): a randomized controlled study.

PubMed

Nguyen, Phuong H; Lowe, Alyssa E; Martorell, Reynaldo; Nguyen, Hieu; Pham, Hoa; Nguyen, Son; Harding, Kimberly B; Neufeld, Lynnette M; Reinhart, Gregory A; Ramakrishnan, Usha

2012-10-24

Low birth weight and maternal anemia remain intractable problems in many developing countries. The adequacy of the current strategy of providing iron-folic acid (IFA) supplements only during pregnancy has been questioned given many women enter pregnancy with poor iron stores, the substantial micronutrient demand by maternal and fetal tissues, and programmatic issues related to timing and coverage of prenatal care. Weekly IFA supplementation for women of reproductive age (WRA) improves iron status and reduces the burden of anemia in the short term, but few studies have evaluated subsequent pregnancy and birth outcomes.The Preconcept trial aims to determine whether pre-pregnancy weekly IFA or multiple micronutrient (MM) supplementation will improve birth outcomes and maternal and infant iron status compared to the current practice of prenatal IFA supplementation only. This paper provides an overview of study design, methodology and sample characteristics from baseline survey data and key lessons learned. We have recruited 5011 WRA in a double-blind stratified randomized controlled trial in rural Vietnam and randomly assigned them to receive weekly supplements containing either: 1) 2800 μg folic acid 2) 60 mg iron and 2800 μg folic acid or 3) MM. Women who become pregnant receive daily IFA, and are being followed through pregnancy, delivery, and up to three months post-partum. Study outcomes include birth outcomes and maternal and infant iron status. Data are being collected on household characteristics, maternal diet and mental health, anthropometry, infant feeding practices, morbidity and compliance. The study is timely and responds to the WHO Global Expert Consultation which identified the need to evaluate the long term benefits of weekly IFA and MM supplementation in WRA. Findings will generate new information to help guide policy and programs designed to reduce the burden of anemia in women and children and improve maternal and child health outcomes in resource poor settings. NCT01665378.

Evaluation of CFETR as a Fusion Nuclear Science Facility using multiple system codes

NASA Astrophysics Data System (ADS)

Chan, V. S.; Costley, A. E.; Wan, B. N.; Garofalo, A. M.; Leuer, J. A.

2015-02-01

This paper presents the results of a multi-system codes benchmarking study of the recently published China Fusion Engineering Test Reactor (CFETR) pre-conceptual design (Wan et al 2014 IEEE Trans. Plasma Sci. 42 495). Two system codes, General Atomics System Code (GASC) and Tokamak Energy System Code (TESC), using different methodologies to arrive at CFETR performance parameters under the same CFETR constraints show that the correlation between the physics performance and the fusion performance is consistent, and the computed parameters are in good agreement. Optimization of the first wall surface for tritium breeding and the minimization of the machine size are highly compatible. Variations of the plasma currents and profiles lead to changes in the required normalized physics performance, however, they do not significantly affect the optimized size of the machine. GASC and TESC have also been used to explore a lower aspect ratio, larger volume plasma taking advantage of the engineering flexibility in the CFETR design. Assuming the ITER steady-state scenario physics, the larger plasma together with a moderately higher BT and Ip can result in a high gain Qfus ˜ 12, Pfus ˜ 1 GW machine approaching DEMO-like performance. It is concluded that the CFETR baseline mode can meet the minimum goal of the Fusion Nuclear Science Facility (FNSF) mission and advanced physics will enable it to address comprehensively the outstanding critical technology gaps on the path to a demonstration reactor (DEMO). Before proceeding with CFETR construction steady-state operation has to be demonstrated, further development is needed to solve the divertor heat load issue, and blankets have to be designed with tritium breeding ratio (TBR) >1 as a target.

DEMO port plug design and integration studies

NASA Astrophysics Data System (ADS)

Grossetti, G.; Boccaccini, L. V.; Cismondi, F.; Del Nevo, A.; Fischer, U.; Franke, T.; Granucci, G.; Hernández, F.; Mozzillo, R.; Strauß, D.; Tran, M. Q.; Vaccaro, A.; Villari, R.

2017-11-01

The EUROfusion Consortium established in 2014 and composed by European Fusion Laboratories, and in particular the Power Plant Physics and Technology department aims to develop a conceptual design for the Fusion DEMOnstration Power Plant, DEMO. With respect to present experimental machines and ITER, the main goals of DEMO are to produce electricity continuously for a period of about 2 h, with a net electrical power output of a few hundreds of MW, and to allow tritium self-sufficient breeding with an adequately high margin in order to guarantee its planned operational schedule, including all planned maintenance intervals. This will eliminate the need to import tritium fuel from external sources during operations. In order to achieve these goals, extensive engineering efforts as well as physics studies are required to develop a design that can ensure a high level of plant reliability and availability. In particular, interfaces between systems must be addressed at a very early phase of the project, in order to proceed consistently. In this paper we present a preliminary design and integration study, based on physics assessments for the EU DEMO1 Baseline 2015 with an aspect ratio of 3.1 and 18 toroidal field coils, for the DEMO port plugs. These aim to host systems like electron cyclotron heating launchers currently developed within the Work Package Heating and Current Drive that need an external radial access to the plasma and through in-vessel systems like the breeder blanket. A similar approach shown here could be in principle followed by other systems, e.g. other heating and current drive systems or diagnostics. The work addresses the interfaces between the port plug and the blanket considering the helium-cooled pebble bed and the water cooled lithium lead which are two of four breeding blanket concepts under investigation in Europe within the Power Plant Physics and Technology Programme: the required openings will be evaluated in terms of their impact onto the blanket segments thermo-mechanical and nuclear design considering mechanical integration aspects but also their impact on tritium breeding ratio. Since DEMO is still in a pre-conceptual phase, the same methodology is applicable to the other two blanket concepts, as well.

The current status of fluoride salt cooled high temperature reactor (FHR) technology and its overlap with HIF target chamber concepts

NASA Astrophysics Data System (ADS)

Scarlat, Raluca O.; Peterson, Per F.

2014-01-01

The fluoride salt cooled high temperature reactor (FHR) is a class of fission reactor designs that use liquid fluoride salt coolant, TRISO coated particle fuel, and graphite moderator. Heavy ion fusion (HIF) can likewise make use of liquid fluoride salts, to create thick or thin liquid layers to protect structures in the target chamber from ablation by target X-rays and damage from fusion neutron irradiation. This presentation summarizes ongoing work in support of design development and safety analysis of FHR systems. Development work for fluoride salt systems with application to both FHR and HIF includes thermal-hydraulic modeling and experimentation, salt chemistry control, tritium management, salt corrosion of metallic alloys, and development of major components (e.g., pumps, heat exchangers) and gas-Brayton cycle power conversion systems. In support of FHR development, a thermal-hydraulic experimental test bay for separate effects (SETs) and integral effect tests (IETs) was built at UC Berkeley, and a second IET facility is under design. The experiments investigate heat transfer and fluid dynamics and they make use of oils as simulant fluids at reduced scale, temperature, and power of the prototypical salt-cooled system. With direct application to HIF, vortex tube flow was investigated in scaled experiments with mineral oil. Liquid jets response to impulse loading was likewise studied using water as a simulant fluid. A set of four workshops engaging industry and national laboratory experts were completed in 2012, with the goal of developing a technology pathway to the design and licensing of a commercial FHR. The pathway will include experimental and modeling efforts at universities and national laboratories, requirements for a component test facility for reliability testing of fluoride salt equipment at prototypical conditions, requirements for an FHR test reactor, and development of a pre-conceptual design for a commercial reactor.

Endocrine basis for recurrent pregnancy loss.

PubMed

Ke, Raymond W

2014-03-01

Common endocrinopathies are a frequent contributor to spontaneous and recurrent miscarriage. Although the diagnostic criteria for luteal phase defect (LPD) is still controversial, treatment of patients with both recurrent pregnancy loss and LPD using progestogen in early pregnancy seems beneficial. For patients who are hypothyroid, thyroid hormone replacement therapy along with careful monitoring in the preconceptual and early pregnancy period is associated with improved outcome. Women with polycystic ovary syndrome (PCOS) have an increased risk of pregnancy loss. Management of PCOS with normalization of weight or metformin seems to reduce the risk of pregnancy loss. Copyright © 2014 Elsevier Inc. All rights reserved.

Exercise alters mouse sperm small noncoding RNAs and induces a transgenerational modification of male offspring conditioned fear and anxiety

PubMed Central

Short, A K; Yeshurun, S; Powell, R; Perreau, V M; Fox, A; Kim, J H; Pang, T Y; Hannan, A J

2017-01-01

There is growing evidence that the preconceptual lifestyle and other environmental exposures of a father can significantly alter the physiological and behavioral phenotypes of their children. We and others have shown that paternal preconception stress, regardless of whether the stress was experienced during early-life or adulthood, results in offspring with altered anxiety and depression-related behaviors, attributed to hypothalamic–pituitary–adrenal axis dysregulation. The transgenerational response to paternal preconceptual stress is believed to be mediated by sperm-borne small noncoding RNAs, specifically microRNAs. As physical activity confers physical and mental health benefits for the individual, we used a model of voluntary wheel-running and investigated the transgenerational response to paternal exercise. We found that male offspring of runners had suppressed reinstatement of juvenile fear memory, and reduced anxiety in the light–dark apparatus during adulthood. No changes in these affective behaviors were observed in female offspring. We were surprised to find that running had a limited impact on sperm-borne microRNAs. The levels of three unique microRNAs (miR-19b, miR-455 and miR-133a) were found to be altered in the sperm of runners. In addition, we discovered that the levels of two species of tRNA-derived RNAs (tDRs)—tRNA-Gly and tRNA-Pro—were also altered by running. Taken together, we believe this is the first evidence that paternal exercise is associated with an anxiolytic behavioral phenotype of male offspring and altered levels of small noncoding RNAs in sperm. These small noncoding RNAs are known to have an impact on post-transcriptional gene regulation and can thus change the developmental trajectory of offspring brains and associated affective behaviors. PMID:28463242

Realizing the Potential of Adolescence to Prevent Transgenerational Conditioning of Noncommunicable Disease Risk: Multi-Sectoral Design Frameworks

PubMed Central

Bay, Jacquie L.; Morton, Susan M.; Vickers, Mark H.

2016-01-01

Evidence from the field of Developmental Origins of Health and Disease (DOHaD) demonstrates that early life environmental exposures impact later-life risk of non-communicable diseases (NCDs). This has revealed the transgenerational nature of NCD risk, thus demonstrating that interventions to improve environmental exposures during early life offer important potential for primary prevention of DOHaD-related NCDs. Based on this evidence, the prospect of multi-sectoral approaches to enable primary NCD risk reduction has been highlighted in major international reports. It is agreed that pregnancy, lactation and early childhood offer significant intervention opportunities. However, the importance of interventions that establish positive behaviors impacting nutritional and non-nutritional environmental exposures in the pre-conceptual period in both males and females, thus capturing the full potential of DOHaD, must not be overlooked. Adolescence, a period where life-long health-related behaviors are established, is therefore an important life-stage for DOHaD-informed intervention. DOHaD evidence underpinning this potential is well documented. However, there is a gap in the literature with respect to combined application of theoretical evidence from science, education and public health to inform intervention design. This paper addresses this gap, presenting a review of evidence informing theoretical frameworks for adolescent DOHaD interventions that is accessible collectively to all relevant sectors. PMID:27417627

Waste Management Facilities Cost Information report for Greater-Than-Class C and DOE equivalent special case waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feizollahi, F.; Shropshire, D.

This Waste Management Facility Cost Information (WMFCI) report for Greater-Than-Class C low-level waste (GTCC LLW) and DOE equivalent special case waste contains preconceptual designs and planning level life-cycle cost (PLCC) estimates for treatment, storage, and disposal facilities needed for management of GTCC LLW and DOE equivalent waste. The report contains information on 16 facilities (referred to as cost modules). These facilities are treatment facility front-end and back-end support functions (administration support, and receiving, preparation, and shipping cost modules); seven treatment concepts (incineration, metal melting, shredding/compaction, solidification, vitrification, metal sizing and decontamination, and wet/air oxidation cost modules); two storage concepts (enclosedmore » vault and silo); disposal facility front-end functions (disposal receiving and inspection cost module); and four disposal concepts (shallow-land, engineered shallow-land, intermediate depth, and deep geological cost modules). Data in this report allow the user to develop PLCC estimates for various waste management options. A procedure to guide the U.S. Department of Energy (DOE) and its contractor personnel in the use of estimating data is also included in this report.« less

A Burning Plasma Experiment: the role of international collaboration

NASA Astrophysics Data System (ADS)

Prager, Stewart

2003-04-01

The world effort to develop fusion energy is at the threshold of a new stage in its research: the investigation of burning plasmas. A burning plasma is self-heated. The 100 million degree temperature of the plasma is maintained by the heat generated by the fusion reactions themselves, as occurs in burning stars. The fusion-generated alpha particles produce new physical phenomena that are strongly coupled together as a nonlinear complex system, posing a major plasma physics challenge. Two attractive options are being considered by the US fusion community as burning plasma facilities: the international ITER experiment and the US-based FIRE experiment. ITER (the International Thermonuclear Experimental Reactor) is a large, power-plant scale facility. It was conceived and designed by a partnership of the European Union, Japan, the Soviet Union, and the United States. At the completion of the first engineering design in 1998, the US discontinued its participation. FIRE (the Fusion Ignition Research Experiment) is a smaller, domestic facility that is at an advanced pre-conceptual design stage. Each facility has different scientific, programmatic and political implications. Selecting the optimal path for burning plasma science is itself a challenge. Recently, the Fusion Energy Sciences Advisory Committee recommended a dual path strategy in which the US seek to rejoin ITER, but be prepared to move forward with FIRE if the ITER negotiations do not reach fruition by July, 2004. Either the ITER or FIRE experiment would reveal the behavior of burning plasmas, generate large amounts of fusion power, and be a huge step in establishing the potential of fusion energy to contribute to the world's energy security.

Inertial Fusion Power Plant Concept of Operations and Maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anklam, T.; Knutson, B.; Dunne, A. M.

2015-01-15

Parsons and LLNL scientists and engineers performed design and engineering work for power plant pre-conceptual designs based on the anticipated laser fusion demonstrations at the National Ignition Facility (NIF). Work included identifying concepts of operations and maintenance (O&M) and associated requirements relevant to fusion power plant systems analysis. A laser fusion power plant would incorporate a large process and power conversion facility with a laser system and fusion engine serving as the heat source, based in part on some of the systems and technologies advanced at NIF. Process operations would be similar in scope to those used in chemical, oilmore » refinery, and nuclear waste processing facilities, while power conversion operations would be similar to those used in commercial thermal power plants. While some aspects of the tritium fuel cycle can be based on existing technologies, many aspects of a laser fusion power plant presents several important and unique O&M requirements that demand new solutions. For example, onsite recovery of tritium; unique remote material handling systems for use in areas with high radiation, radioactive materials, or high temperatures; a five-year fusion engine target chamber replacement cycle with other annual and multi-year cycles anticipated for major maintenance of other systems, structures, and components (SSC); and unique SSC for fusion target waste recycling streams. This paper describes fusion power plant O&M concepts and requirements, how O&M requirements could be met in design, and how basic organizational and planning issues can be addressed for a safe, reliable, economic, and feasible fusion power plant.« less

Inertial fusion power plant concept of operations and maintenance

NASA Astrophysics Data System (ADS)

Knutson, Brad; Dunne, Mike; Kasper, Jack; Sheehan, Timothy; Lang, Dwight; Anklam, Tom; Roberts, Valerie; Mau, Derek

2015-02-01

Parsons and LLNL scientists and engineers performed design and engineering work for power plant pre-conceptual designs based on the anticipated laser fusion demonstrations at the National Ignition Facility (NIF). Work included identifying concepts of operations and maintenance (O&M) and associated requirements relevant to fusion power plant systems analysis. A laser fusion power plant would incorporate a large process and power conversion facility with a laser system and fusion engine serving as the heat source, based in part on some of the systems and technologies advanced at NIF. Process operations would be similar in scope to those used in chemical, oil refinery, and nuclear waste processing facilities, while power conversion operations would be similar to those used in commercial thermal power plants. While some aspects of the tritium fuel cycle can be based on existing technologies, many aspects of a laser fusion power plant presents several important and unique O&M requirements that demand new solutions. For example, onsite recovery of tritium; unique remote material handling systems for use in areas with high radiation, radioactive materials, or high temperatures; a five-year fusion engine target chamber replacement cycle with other annual and multi-year cycles anticipated for major maintenance of other systems, structures, and components (SSC); and unique SSC for fusion target waste recycling streams. This paper describes fusion power plant O&M concepts and requirements, how O&M requirements could be met in design, and how basic organizational and planning issues can be addressed for a safe, reliable, economic, and feasible fusion power plant.

Study protocol for the evaluation of an Infant Simulator based program delivered in schools: a pragmatic cluster randomised controlled trial

PubMed Central

2010-01-01

Background This paper presents the study protocol for a pragmatic randomised controlled trial to evaluate the impact of a school based program developed to prevent teenage pregnancy. The program includes students taking care of an Infant Simulator; despite growing popularity and an increasing global presence of such programs, there is no published evidence of their long-term impact. The aim of this trial is to evaluate the Virtual Infant Parenting (VIP) program by investigating pre-conceptual health and risk behaviours, teen pregnancy and the resultant birth outcomes, early child health and maternal health. Methods and Design Fifty-seven schools (86% of 66 eligible secondary schools) in Perth, Australia were recruited to the clustered (by school) randomised trial, with even randomisation to the intervention and control arms. Between 2003 and 2006, the VIP program was administered to 1,267 participants in the intervention schools, while 1,567 participants in the non-intervention schools received standard curriculum. Participants were all female and aged between 13-15 years upon recruitment. Pre and post-intervention questionnaires measured short-term impact and participants are now being followed through their teenage years via data linkage to hospital medical records, abortion clinics and education records. Participants who have a live birth are interviewed by face-to-face interview. Kaplan-Meier survival analysis and proportional hazards regression will test for differences in pregnancy, birth and abortion rates during the teenage years between the study arms. Discussion This protocol paper provides a detailed overview of the trial design as well as initial results in the form of participant flow. The authors describe the intervention and its delivery within the natural school setting and discuss the practical issues in the conduct of the trial, including recruitment. The trial is pragmatic and will directly inform those who provide Infant Simulator based programs in school settings. Trial registration ISRCTN24952438 PMID:20964860

Measuring pregnancy planning: A psychometric evaluation and comparison of two scales.

PubMed

Drevin, Jennifer; Kristiansson, Per; Stern, Jenny; Rosenblad, Andreas

2017-11-01

To psychometrically test the London Measure of Unplanned Pregnancy and compare it with the Swedish Pregnancy Planning Scale. The incidence of unplanned pregnancies is an important indicator of reproductive health. The London Measure of Unplanned Pregnancy measures pregnancy planning by taking contraceptive use, timing, intention to become pregnant, desire for pregnancy, partner agreement, and pre-conceptual preparations into account. It has, however, previously not been psychometrically evaluated using confirmatory factor analysis. The Likert-scored single-item Swedish Pregnancy Planning Scale has been developed to measure the woman's own view of pregnancy planning level. Cross-sectional design. In 2012-2013, 5493 pregnant women living in Sweden were invited to participate in the Swedish Pregnancy Planning study, of whom 3327 (61%) agreed to participate and answered a questionnaire. A test-retest pilot study was conducted in 2011-2012. Thirty-two participants responded to the questionnaire on two occasions 14 days apart. Data were analysed using confirmatory factor analysis, Cohen's weighted kappa and Spearman's correlation. All items of the London Measure of Unplanned Pregnancy contributed to measuring pregnancy planning, but four items had low item-reliability. The London Measure of Unplanned Pregnancy and Swedish Pregnancy Planning Scale corresponded reasonably well with each other and both showed good test-retest reliability. The London Measure of Unplanned Pregnancy may benefit from item reduction and its usefulness may be questioned. The Swedish Pregnancy Planning Scale is time-efficient and shows acceptable reliability and construct validity, which makes it more useful for measuring pregnancy planning. © 2017 John Wiley & Sons Ltd.

Feasibility Study for Renewable Energy Development on Tribal Lands

DOE Office of Scientific and Technical Information (OSTI.GOV)

John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor

2005-07-21

Project Objective: The Mississippi Band of Choctaw Indians (MBCI) conducted a study of the feasibility of siting a renewable energy biomass-based installation on tribal lands. The purpose of the study was to determine whether such an installation can be economically sustainable, as well as consistent with the cultural, social, and economic goals of the Tribe. Scope: To achieve the goal of the feasibility study, the following tasks were carried out: (1) Resource availability assessment--The objective of this assessment was to determine the availability of both poultry litter and wood residues for use in the proposed facility. (2) Power utilization assessment--Themore » objective of this assessment was to determine the potential market size for power produced, the existing infrastructure for delivering power to that market, and the costs and economic returns for doing so. (3) Technology review--The objective of this review was to identify one, or more, technical options for detailed economic and technical assessment. The study considered a range of feedstock and product mixtures of poultry litter; wood residues as feedstock; and electrical power and other ancillary products as outputs. Distributed power sources was also examined. Technologies ranging from gasification to systems that produce both power and value-added chemicals were considered. Technologies selected for detailed review were those that can be sized to process the amount of available feed (poultry litter, or poultry litter and wood residues), and that also appear to make economic sense in terms of the value of their inputs. The technology review leaned heavily on the experience from similar prior DOE projects, particularly those conducted by the National Renewable Energy Laboratory (NREL). NREL was involved in a consultative role, so that the project team could leverage their experience. (4) Systems Design(s)--Based on the technology review, a pre-conceptual design for an installation was developed. This included identification of unit operations and equipment, maintenance, manpower, feedstock requirements, and output (power and any other ancillary products). Energy and mass flows were identified. (5) Manpower development assessment--The objectives of this assessment was to identify training needs for the selected option(s), and determine how they can best be met. Using the manpower estimates from the pre-conceptual system design, skills and training needs were to be identified. A plan for providing the needed manpower was to be developed, and any associated costs determined. (6) Economic assessment--The objective of this assessment was to determine the economic viability and sustainability of the technology option(s) identified through the technical review option. The costs of bringing the feedstock to the proposed facility were combined with nominal operation costs and potential production distribution costs to identify total costs. Revenue from power distribution (and, possibly, from sale of ancillary products) were combined with any possible government credits or payments to identify gross revenue. Economic viability was determined by net revenue and return on investment. A business plan for the selected option was to be produced that would consider long-term sustainability of the project. (7) MBCI compatibility assessment--The objective of this assessment was to determine whether the renewable energy technology was compatible with the MBCI's cultural, social and economic values. As part of this assessment, the environmental impacts and benefits were to be determined (Environmental stewardship is an important part of the Choctaw culture.). The effects of a project on employment were projected. The compatibility of the renewable energy project with MBCI cultural and social values were determined. Most importantly, the compatibility of the renewable energy installation with the MBCIs economic development goals and directions were determined. A project team led by the Mississippi Band of Choctaw Indians (MBCI) conducted the feasibility study. The team included the Mississippi Alternative Energy Enterprise (MAEE), the Mississippi State University Food and Fiber Center, Mississippi State University Diagnostic Instrumentation and Analysis Laboratory (DIAL), and the Mississippi State University Department of Electrical and Computer Engineering. This report and its findings are based on the best available data existing during the covering period and the analysis reflects good faith estimates and assumptions of factors for a biomass-based renewable energy project for the Mississippi Band of Choctaw Indians and any conclusions or finding herein should not be extrapolated to other areas of the country.« less

Status report on the Small Secure Transportable Autonomous Reactor (SSTAR) /Lead-cooled Fast Reactor (LFR) and supporting research and development.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sienicki, J. J.; Moisseytsev, A.; Yang, W. S.

2008-06-23

This report provides an update on development of a pre-conceptual design for the Small Secure Transportable Autonomous Reactor (SSTAR) Lead-Cooled Fast Reactor (LFR) plant concept and supporting research and development activities. SSTAR is a small, 20 MWe (45 MWt), natural circulation, fast reactor plant for international deployment concept incorporating proliferation resistance for deployment in non-fuel cycle states and developing nations, fissile self-sufficiency for efficient utilization of uranium resources, autonomous load following making it suitable for small or immature grid applications, and a high degree of passive safety further supporting deployment in developing nations. In FY 2006, improvements have been mademore » at ANL to the pre-conceptual design of both the reactor system and the energy converter which incorporates a supercritical carbon dioxide Brayton cycle providing higher plant efficiency (44 %) and improved economic competitiveness. The supercritical CO2 Brayton cycle technology is also applicable to Sodium-Cooled Fast Reactors providing the same benefits. One key accomplishment has been the development of a control strategy for automatic control of the supercritical CO2 Brayton cycle in principle enabling autonomous load following over the full power range between nominal and essentially zero power. Under autonomous load following operation, the reactor core power adjusts itself to equal the heat removal from the reactor system to the power converter through the large reactivity feedback of the fast spectrum core without the need for motion of control rods, while the automatic control of the power converter matches the heat removal from the reactor to the grid load. The report includes early calculations for an international benchmarking problem for a LBE-cooled, nitride-fueled fast reactor core organized by the IAEA as part of a Coordinated Research Project on Small Reactors without Onsite Refueling; the calculations use the same neutronics computer codes and methodologies applied to SSTAR. Another section of the report details the SSTAR safety design approach which is based upon defense-in-depth providing multiple levels of protection against the release of radioactive materials and how the inherent safety features of the lead coolant, nitride fuel, fast neutron spectrum core, pool vessel configuration, natural circulation, and containment meet or exceed the requirements for each level of protection. The report also includes recent results of a systematic analysis by LANL of data on corrosion of candidate cladding and structural material alloys of interest to SSTAR by LBE and Pb coolants; the data were taken from a new database on corrosion by liquid metal coolants created at LANL. The analysis methodology that considers penetration of an oxidation front into the alloy and dissolution of the trailing edge of the oxide into the coolant enables the long-term corrosion rate to be extracted from shorter-term corrosion data thereby enabling an evaluation of alloy performance over long core lifetimes (e.g., 30 years) that has heretofore not been possible. A number of candidate alloy specimens with special treatments or coatings which might enhance corrosion resistance at the temperatures at which SSTAR would operate were analyzed following testing in the DELTA loop at LANL including steels that were treated by laser peening at LLNL; laser peening is an approach that alters the oxide-metal bonds which could potentially improve corrosion resistance. LLNL is also carrying out Multi-Scale Modeling of the Fe-Cr system with the goal of assisting in the development of cladding and structural materials having greater resistance to irradiation.« less

An Expert System-Driven Method for Parametric Trajectory Optimization During Conceptual Design

NASA Technical Reports Server (NTRS)

Dees, Patrick D.; Zwack, Mathew R.; Steffens, Michael; Edwards, Stephen; Diaz, Manuel J.; Holt, James B.

2015-01-01

During the early phases of engineering design, the costs committed are high, costs incurred are low, and the design freedom is high. It is well documented that decisions made in these early design phases drive the entire design's life cycle cost. In a traditional paradigm, key design decisions are made when little is known about the design. As the design matures, design changes become more difficult in both cost and schedule to enact. The current capability-based paradigm, which has emerged because of the constrained economic environment, calls for the infusion of knowledge usually acquired during later design phases into earlier design phases, i.e. bringing knowledge acquired during preliminary and detailed design into pre-conceptual and conceptual design. An area of critical importance to launch vehicle design is the optimization of its ascent trajectory, as the optimal trajectory will be able to take full advantage of the launch vehicle's capability to deliver a maximum amount of payload into orbit. Hence, the optimal ascent trajectory plays an important role in the vehicle's affordability posture yet little of the information required to successfully optimize a trajectory is known early in the design phase. Thus, the current paradigm of optimizing ascent trajectories involves generating point solutions for every change in a vehicle's design parameters. This is often a very tedious, manual, and time-consuming task for the analysts. Moreover, the trajectory design space is highly non-linear and multi-modal due to the interaction of various constraints. When these obstacles are coupled with the Program to Optimize Simulated Trajectories (POST), an industry standard program to optimize ascent trajectories that is difficult to use, expert trajectory analysts are required to effectively optimize a vehicle's ascent trajectory. Over the course of this paper, the authors discuss a methodology developed at NASA Marshall's Advanced Concepts Office to address these issues. The methodology is two-fold: first, capture the heuristics developed by human analysts over their many years of experience; and secondly, leverage the power of modern computing to evaluate multiple trajectories simultaneously and therefore enable the exploration of the trajectory's design space early during the pre- conceptual and conceptual phases of design. This methodology is coupled with design of experiments in order to train surrogate models, which enables trajectory design space visualization and parametric optimal ascent trajectory information to be available when early design decisions are being made.

High risk pregnancy in the workplace. Influencing positive outcomes.

PubMed

Cannon, R B; Schmidt, J V; Cambardella, B; Browne, S E

2000-09-01

Childbearing employees are well served by the occupational health nurse who promotes optimal preconceptual and pregnancy health practices, uses community resources, and maintains current knowledge about high risk pregnancy prevention and care. These broad goals of care can lead to decreased absenteeism, healthier and happier employees, and more positive outcomes of pregnancy. For employees with high risk pregnancies, the role of the occupational health nurse includes, but is not limited to, facilitating awareness with the employer, making suggestions for adjusting working conditions, making frequent assessments of the employee's needs, and communicating with prenatal health care providers. Occupational health nurses should never underestimate their role and potential influence on the mother, and on her significant other, for a positive outcome of her pregnancy.

When Women with Cystic Fibrosis Become Mothers: Psychosocial Impact and Adjustments

PubMed Central

Duff, Alistair J. A.; Etherington, Christine

2016-01-01

Advances in the treatment and life expectancy of cystic fibrosis (CF) patients mean that motherhood is now a realistic option for many women with CF. This qualitative study explored the psychosocial impact and adjustments made when women with CF become mothers. Women with CF (n = 11) were recruited via an online forum and participated in semistructured telephone interviews about their experiences of becoming a mother. Transcriptions were analysed using Grounded Theory. Analysis revealed three core categories: (i) “Living with CF”: how becoming a mother impacted on health and treatment adherence, requiring a change in support from the CF team, (ii) “Becoming a Mother”: balancing issues common to new mothers with their CF, and (iii) “Pooling Personal Resources”: coping strategies in managing the dual demands of child and CF care. Participants experienced a variety of complex psychosocial processes. Most participants acknowledged an initial negative impact on CF care; however over time they reported successful adaptation to managing dual commitments and that adherence and motivation to stay well had improved. This study highlights the need for preconceptual psychosocial counselling and postpartum adjustment to CF care. PMID:27999682

Impact of Passive Safety on FHR Instrumentation Systems Design and Classification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, David Eugene

2015-01-01

Fluoride salt-cooled high-temperature reactors (FHRs) will rely more extensively on passive safety than earlier reactor classes. 10CFR50 Appendix A, General Design Criteria for Nuclear Power Plants, establishes minimum design requirements to provide reasonable assurance of adequate safety. 10CFR50.69, Risk-Informed Categorization and Treatment of Structures, Systems and Components for Nuclear Power Reactors, provides guidance on how the safety significance of systems, structures, and components (SSCs) should be reflected in their regulatory treatment. The Nuclear Energy Institute (NEI) has provided 10 CFR 50.69 SSC Categorization Guideline (NEI-00-04) that factors in probabilistic risk assessment (PRA) model insights, as well as deterministic insights, throughmore » an integrated decision-making panel. Employing the PRA to inform deterministic requirements enables an appropriately balanced, technically sound categorization to be established. No FHR currently has an adequate PRA or set of design basis accidents to enable establishing the safety classification of its SSCs. While all SSCs used to comply with the general design criteria (GDCs) will be safety related, the intent is to limit the instrumentation risk significance through effective design and reliance on inherent passive safety characteristics. For example, FHRs have no safety-significant temperature threshold phenomena, thus enabling the primary and reserve reactivity control systems required by GDC 26 to be passively, thermally triggered at temperatures well below those for which core or primary coolant boundary damage would occur. Moreover, the passive thermal triggering of the primary and reserve shutdown systems may relegate the control rod drive motors to the control system, substantially decreasing the amount of safety-significant wiring needed. Similarly, FHR decay heat removal systems are intended to be running continuously to minimize the amount of safety-significant instrumentation needed to initiate operation of systems and components important to safety as required in GDC 20. This paper provides an overview of the design process employed to develop a pre-conceptual FHR instrumentation architecture intended to lower plant capital and operational costs by minimizing reliance on expensive, safety related, safety-significant instrumentation through the use of inherent passive features of FHRs.« less

Bone density changes in premature ovarian insufficiency patients who have had term pregnancies.

PubMed

Velasco, Mariana; Holloway, Debra; Rymer, Janice

2014-12-01

Premature ovarian insufficiency affects 1% of women under the age of 40 and is associated with a hypoestrogenic state, potentially leading to multiple comorbidities including reduced bone density and fertility. An unpredictable ovarian function is observed in 50% of patients with 5-10% being able to achieve a pregnancy. Longitudinal studies have shown a temporary decline in bone mineral density of up to 5% during pregnancy and lactation in healthy women, with the loss of bone density post-partum being proportional to the period of breastfeeding. Effects of pregnancy in women with premature ovarian insufficiency have not been widely documented. Nevertheless, a lower bone mineral density baseline has been observed pre-conceptually, associated with both the hypoestrogenic state of the condition and the possibility that premature ovarian insufficiency was developed prior to achieving peak bone mass. This may suggest that breastfeeding could cause further deterioration in bone mineral density that may not be easy to recover from due to the reduced baseline levels. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Study protocol for the evaluation of an Infant Simulator based program delivered in schools: a pragmatic cluster randomised controlled trial.

PubMed

Brinkman, Sally A; Johnson, Sarah E; Lawrence, David; Codde, James P; Hart, Michael B; Straton, Judith A Y; Silburn, Sven

2010-10-21

This paper presents the study protocol for a pragmatic randomised controlled trial to evaluate the impact of a school based program developed to prevent teenage pregnancy. The program includes students taking care of an Infant Simulator; despite growing popularity and an increasing global presence of such programs, there is no published evidence of their long-term impact. The aim of this trial is to evaluate the Virtual Infant Parenting (VIP) program by investigating pre-conceptual health and risk behaviours, teen pregnancy and the resultant birth outcomes, early child health and maternal health. Fifty-seven schools (86% of 66 eligible secondary schools) in Perth, Australia were recruited to the clustered (by school) randomised trial, with even randomisation to the intervention and control arms. Between 2003 and 2006, the VIP program was administered to 1,267 participants in the intervention schools, while 1,567 participants in the non-intervention schools received standard curriculum. Participants were all female and aged between 13-15 years upon recruitment. Pre and post-intervention questionnaires measured short-term impact and participants are now being followed through their teenage years via data linkage to hospital medical records, abortion clinics and education records. Participants who have a live birth are interviewed by face-to-face interview. Kaplan-Meier survival analysis and proportional hazards regression will test for differences in pregnancy, birth and abortion rates during the teenage years between the study arms. This protocol paper provides a detailed overview of the trial design as well as initial results in the form of participant flow. The authors describe the intervention and its delivery within the natural school setting and discuss the practical issues in the conduct of the trial, including recruitment. The trial is pragmatic and will directly inform those who provide Infant Simulator based programs in school settings. ISRCTN24952438.

Interim status report on lead-cooled fast reactor (LFR) research and development.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tzanos, C. P.; Sienicki, J. J.; Moisseytsev, A.

2008-03-31

This report discusses the status of Lead-Cooled Fast Reactor (LFR) research and development carried out during the first half of FY 2008 under the U.S. Department of Energy Generation IV Nuclear Energy Systems Initiative. Lead-Cooled Fast Reactor research and development has recently been transferred from Generation IV to the Reactor Campaign of the Global Nuclear Energy Partnership (GNEP). Another status report shall be issued at the end of FY 2008 covering all of the LFR activities carried out in FY 2008 for both Generation IV and GNEP. The focus of research and development in FY 2008 is an initial investigationmore » of a concept for a LFR Advanced Recycling Reactor (ARR) Technology Pilot Plant (TPP)/demonstration test reactor (demo) incorporating features and operating conditions of the European Lead-cooled SYstem (ELSY) {approx} 600 MWe lead (Pb)-cooled LFR preconceptual design for the transmutation of waste and central station power generation, and which would enable irradiation testing of advanced fuels and structural materials. Initial scoping core concept development analyses have been carried out for a 100 MWt core composed of sixteen open-lattice 20 by 20 fuel assemblies largely similar to those of the ELSY preconceptual fuel assembly design incorporating fuel pins with mixed oxide (MOX) fuel, central control rods in each fuel assembly, and cooled with Pb coolant. For a cycle length of three years, the core is calculated to have a conversion ratio of 0.79, an average discharge burnup of 108 MWd/kg of heavy metal, and a burnup reactivity swing of about 13 dollars. With a control rod in each fuel assembly, the reactivity worth of an individual rod would need to be significantly greater than one dollar which is undesirable for postulated rod withdrawal reactivity insertion events. A peak neutron fast flux of 2.0 x 10{sup 15} (n/cm{sup 2}-s) is calculated. For comparison, the 400 MWt Fast Flux Test Facility (FFTF) achieved a peak neutron fast flux of 7.2 x 10{sup 15} (n/cm{sup 2}-s) and the initially 563 MWt PHENIX reactor attained 2.0 x 10{sup 15} (n/cm{sup 2}-s) before one of three intermediate cooling loops was shut down due to concerns about potential steam generator tube failures. The calculations do not assume a test assembly location for advanced fuels and materials irradiation in place of a fuel assembly (e.g., at the center of the core); the calculations have not examined whether it would be feasible to replace the central assembly by a test assembly location. However, having only fifteen driver assemblies implies a significant effect due to perturbations introduced by the test assembly. The peak neutron fast flux is low compared with the fast fluxes previously achieved in FFTF and PHENIX. Furthermore, the peak neutron fluence is only about half of the limiting value (4 x 10{sup 23} n/cm{sup 2}) typically used for ferritic steels. The results thus suggest that a larger power level (e.g., 400 MWt) and a larger core would be better for a TPP based upon the ELSY fuel assembly design and which can also perform irradiation testing of advanced fuels and materials. In particular, a core having a higher power level and larger dimensions would achieve a suitable average discharge burnup, peak fast flux, peak fluence, and would support the inclusion of one or more test assembly locations. Participation in the Generation IV International Forum Provisional System Steering Committee for the LFR is being maintained throughout FY 2008. Results from the analysis of samples previously exposed to flowing lead-bismuth eutectic (LBE) in the DELTA loop are summarized and a model for the oxidation/corrosion kinetics of steels in heavy liquid metal coolants was applied to systematically compare the calculated long-term (i.e., following several years of growth) oxide layer thicknesses of several steels.« less

Waste Treatment and Immobilization Plant U. S. Department of Energy Office of River Protection Submerged Bed Scrubber Condensate Disposition Project - 13460

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yanochko, Ronald M.; Corcoran, Connie

The Hanford Waste Treatment and Immobilization Plant (WTP) will generate an off-gas treatment system secondary liquid waste stream [submerged bed scrubber (SBS) condensate], which is currently planned for recycle back to the WTP Low Activity Waste (LAW) melter. This SBS condensate waste stream is high in Tc-99, which is not efficiently captured in the vitrified glass matrix [1]. A pre-conceptual engineering study was prepared in fiscal year 2012 to evaluate alternate flow paths for melter off-gas secondary liquid waste generated by the WTP LAW facility [2]. This study evaluated alternatives for direct off-site disposal of this SBS without pre-treatment, whichmore » mitigates potential issues associated with recycling. This study [2] concluded that SBS direct disposal is a viable option to the WTP baseline. The results show: - Off-site transportation and disposal of the SBS condensate is achievable and cost effective. - Reduction of approximately 4,325 vitrified WTP Low Activity Waste canisters could be realized. - Positive WTP operational impacts; minimal WTP construction impacts are realized. - Reduction of mass flow from the LAW Facility to the Pretreatment Facility by 66%. - Improved Double Shell Tank (DST) space management is a benefit. (authors)« less

The Interactive Origin and the Aesthetic Modelling of Image-Schemas and Primary Metaphors.

PubMed

Martínez, Isabel C; Español, Silvia A; Pérez, Diana I

2018-06-02

According to the theory of conceptual metaphor, image-schemas and primary metaphors are preconceptual structures configured in human cognition, based on sensory-motor environmental activity. Focusing on the way both non-conceptual structures are embedded in early social interaction, we provide empirical evidence for the interactive and intersubjective ontogenesis of image-schemas and primary metaphors. We present the results of a multimodal image-schematic microanalysis of three interactive infant-directed performances (the composition of movement, touch, speech, and vocalization that adults produce for-and-with the infants). The microanalyses show that adults aesthetically highlight the image-schematic structures embedded in the multimodal composition of the performance, and that primary metaphors are also lived as embedded in these inter-enactive experiences. The findings allow corroborating that the psychological domains of cognition and affection are not in rivalry or conflict but rather intertwined in meaningful experiences.

The obstetric management of sickle cell disease.

PubMed

Howard, Jo; Oteng-Ntim, Eugene

2012-02-01

Sickle cell disease (SCD) is the most common inherited disease worldwide and is associated with anaemia and intermittent severe pain. Pregnant women who are affected have increased maternal and fetal mortality and morbidity. In view of this obstetricians should have an awareness of this condition and its complications, and pregnancies in women with SCD should be managed by a multidisciplinary team with experience of high risk pregnancies. Ideally women should be seen preconceptually for optimisation of their SCD and partner screening. Antenatal care should include regular outpatient visits with regular monitoring for pre-eclampsia and of fetal growth. Blood transfusion should be used for the treatment of acute anaemia, acute chest syndrome or acute stroke but there is not sufficient evidence currently to recommend its use prophylactically. There is an increased prevalence of sickle crisis during pregnancy and patients should be monitored carefully throughout this time. Copyright © 2011 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qualls, A. L.; Brown, Nicholas R.; Betzler, Benjamin R.

The fluoride salt-cooled high-temperature reactor (FHR) demonstration reactor (DR) is a concept for a salt-cooled reactor with 100 megawatts of thermal output (MWt). It would use tristructural-isotropic (TRISO) particle fuel within prismatic graphite blocks. FLiBe (2 LiF-BeF 2) is the reference primary coolant. The FHR DR is designed to be small, simple, and affordable. Development of the FHR DR is a necessary intermediate step to enable near-term commercial FHRs. Lower risk technologies are purposely included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated within an acceptable budget and schedule. These technologiesmore » include TRISO particle fuel, replaceable core structural material, the use of that same material for the primary and intermediate loops, and tube-and-shell primary-to-intermediate heat exchangers. Several preconceptual and conceptual design efforts that have been conducted on FHR concepts bear a significant influence on the FHR DR design. Specific designs include the Oak Ridge National Laboratory (ORNL) advanced high-temperature reactor (AHTR) with 3400/1500 MWt/megawatts of electric output (MWe), as well as a 125 MWt small modular AHTR (SmAHTR) from ORNL. Other important examples are the Mk1 pebble bed FHR (PB-FHR) concept from the University of California, Berkeley (UCB), and an FHR test reactor design developed at the Massachusetts Institute of Technology (MIT). The MIT FHR test reactor is based on a prismatic fuel platform and is directly relevant to the present FHR DR design effort. These FHR concepts are based on reasonable assumptions for credible commercial prototypes. The FHR DR concept also directly benefits from the operating experience of the Molten Salt Reactor Experiment (MSRE), as well as the detailed design efforts for a large molten salt reactor concept and its breeder variant, the Molten Salt Breeder Reactor. The FHR DR technology is most representative of the 3400 MWt AHTR concept, and it will demonstrate key operational features of that design. The FHR DR will be closely scaled to the SmAHTR concept in power and flows, so any technologies demonstrated will be directly applicable to a reactor concept of that size. The FHR DR is not a commercial prototype design, but rather a DR that serves a cost and risk mitigation function for a later commercial prototype. It is expected to have a limited operational lifetime compared to a commercial plant. It is designed to be a low-cost reactor compared to more mature advanced prototype DRs. A primary reason to build the FHR DR is to learn about salt reactor technologies and demonstrate solutions to remaining technical gaps.« less

Pre-Conceptual Design for Northstar ⁹⁹Mo Process Tritium Removal System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nobile, Arthur; Reichert, Heidi; Hollis, William Kirk

2016-01-12

In this report we describe a preliminary concept for a Tritium Removal System (TRS) to remove tritium that is generated in the ⁹⁹Mo production process. Preliminary calculations have been performed to evaluate an approximate size for the system. The concept described utilizes well-established detritiation technology based on catalytic oxidation of tritium and tritiated hydrocarbons to water in a high temperature (400 °C) reactor and capture of water in a molecular sieve bed. The TRS concept involves use of a single system that would cycle through each of the seven online target systems and remove tritium that has been accumulated aftermore » one week’s run time. The TRS would perform cleanup operations on each target system for a period of approximately 24 hours. This would occur while the system is still online and just prior to target replacement, so tritium levels would at their minimum values for target replacement. In the concept, during normal operation a small fraction (1%) of the helium recirculating in the system would be diverted through the TRS and returned to the flow loop. With this approach sufficient levels of detritiation can be accomplished in a 24 hour period. In the study it was found that because of the need to maintain low oxygen levels in the system (<100 ppm) this increases the size of the catalytic reactor. As a result of this finding, consideration should be given to other methods for removing tritium from the system. Other methods such as catalytic exchange of tritium with an unsaturated organic compound and subsequent trapping on activated carbon or molecular sieve could offer advantages of reducing reactor size and operation at lower reactor temperature. However the most significant advantage of such an approach would be the ability to operate in very low oxygen environments, which would eliminate any concerns for oxidation of the target.« less

Characterization of Delayed-Particle Emission Signatures for Pyroprocessing. Part 1: ABTR Fuel Assembly.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durkee, Jr., Joe W.

A three-part study is conducted using the MCNP6 Monte Carlo radiation-transport code to calculate delayed-neutron (DN) and delayed-gamma (DG) emission signatures for nondestructive assay (NDA) metal-fuel pyroprocessing. In Part 1, MCNP6 is used to produce irradiation-induced used nuclear fuel (UNF) isotopic inventories for an Argonne National Laboratory (ANL) Advanced Burner Test Reactor (ABTR) preconceptual design fuel assembly (FA) model. The initial fuel inventory consists of uranium mixed with light-water-reactor transuranic (TRU) waste and 10 wt% zirconium (U-LWR-SFTRU-10%Zr). To facilitate understanding, parametric evaluation is done using models for 3% and 5% initial 235U a% enrichments, burnups of 5, 10, 15, 20,more » 30, …, 120 GWd/MTIHM, and 3-, 5-, 10-, 20-, and 30- year cooling times. Detailed delayed-particle radioisotope source terms for the irradiate FA are created using BAMF-DRT and SOURCES3A. Using simulation tallies, DG activity ratios (DGARs) are developed for 134Cs/ 137Cs 134Cs/ 154Eu, and 154Eu/ 137Cs markers as a function of (1) burnup and (2) actinide mass, including elemental uranium, neptunium, plutonium, americium, and curium. Spectral-integrated DN emission is also tallied. The study reveals a rich assortment of DGAR behavior as a function of DGAR type, enrichment, burnup, and cooling time. Similarly, DN emission plots show variation as a function of burnup and of actinide mass. Sensitivity of DGAR and DN signatures to initial 235U enrichment, burnup, and cooling time is evident. Comparisons of the ABTR radiation signatures and radiation signatures previously reported for a generic Westinghouse oxide-fuel assembly indicate that there are pronounced differences in the ABTR and Westinghouse oxide-fuel DN and DG signatures. These differences are largely attributable to the initial TRU inventory in the ABTR fuel. The actinide and nonactinide inventories for the FA models serve as source materials for the pre- and postelectrorefining models to be reported in Parts 2 and 3.« less

Haemoglobinopathy diagnosis: algorithms, lessons and pitfalls.

PubMed

Bain, Barbara J

2011-09-01

Diagnosis of haemoglobinopathies, including thalassaemias, can result from either a clinical suspicion of a disorder of globin chain synthesis or from follow-up of an abnormality detected during screening. Screening may be carried out as part of a well defined screening programme or be an ad hoc or opportunistic test. Screening may be preoperative, neonatal, antenatal, preconceptual, premarriage or targeted at specific groups perceived to be at risk. Screening in the setting of haemoglobinopathies may be directed at optimising management of a disorder by early diagnosis, permitting informed reproductive choice or preventing a serious disorder by offering termination of pregnancy. Diagnostic methods and algorithms will differ according to the setting. As the primary test, high performance liquid chromatography is increasingly used and haemoglobin electrophoresis less so with isoelectric focussing being largely confined to screening programmes and referral centres, particularly in newborns. Capillary electrophoresis is being increasingly used. All these methods permit only a presumptive diagnosis with definitive diagnosis requiring either DNA analysis or protein analysis, for example by tandem mass spectrometry. Copyright © 2011 Elsevier Ltd. All rights reserved.

Pre-conceptual Development and characterization of an extruded graphite composite fuel for the TREAT Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luther, Erik; Rooyen, Isabella van; Leckie, Rafael

2015-03-01

In an effort to explore fuel systems that are more robust under accident scenarios, the DOE-NE has identified the need to resume transient testing. The Transient Reactor Test (TREAT) facility has been identified as the preferred option for the resumption of transient testing of nuclear fuel in the United States. In parallel, NNSA’s Global Threat Reduction Initiative (GTRI) Convert program is exploring the needs to replace the existing highly enriched uranium (HEU) core with low enriched uranium (LEU) core. In order to construct a new LEU core, materials and fabrication processes similar to those used in the initial core fabricationmore » must be identified, developed and characterized. In this research, graphite matrix fuel blocks were extruded and materials properties of were measured. Initially the extrusion process followed the historic route; however, the project was expanded to explore methods to increase the graphite content of the fuel blocks and explore modern resins. Materials properties relevant to fuel performance including density, heat capacity and thermal diffusivity were measured. The relationship between process defects and materials properties will be discussed.« less

HYBRID SULFUR PROCESS REFERENCE DESIGN AND COST ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorensek, M.; Summers, W.; Boltrunis, C.

2009-05-12

This report documents a detailed study to determine the expected efficiency and product costs for producing hydrogen via water-splitting using energy from an advanced nuclear reactor. It was determined that the overall efficiency from nuclear heat to hydrogen is high, and the cost of hydrogen is competitive under a high energy cost scenario. It would require over 40% more nuclear energy to generate an equivalent amount of hydrogen using conventional water-cooled nuclear reactors combined with water electrolysis compared to the proposed plant design described herein. There is a great deal of interest worldwide in reducing dependence on fossil fuels, whilemore » also minimizing the impact of the energy sector on global climate change. One potential opportunity to contribute to this effort is to replace the use of fossil fuels for hydrogen production by the use of water-splitting powered by nuclear energy. Hydrogen production is required for fertilizer (e.g. ammonia) production, oil refining, synfuels production, and other important industrial applications. It is typically produced by reacting natural gas, naphtha or coal with steam, which consumes significant amounts of energy and produces carbon dioxide as a byproduct. In the future, hydrogen could also be used as a transportation fuel, replacing petroleum. New processes are being developed that would permit hydrogen to be produced from water using only heat or a combination of heat and electricity produced by advanced, high temperature nuclear reactors. The U.S. Department of Energy (DOE) is developing these processes under a program known as the Nuclear Hydrogen Initiative (NHI). The Republic of South Africa (RSA) also is interested in developing advanced high temperature nuclear reactors and related chemical processes that could produce hydrogen fuel via water-splitting. This report focuses on the analysis of a nuclear hydrogen production system that combines the Pebble Bed Modular Reactor (PBMR), under development by PBMR (Pty.) Ltd. in the RSA, with the Hybrid Sulfur (HyS) Process, under development by the Savannah River National Laboratory (SRNL) in the US as part of the NHI. This work was performed by SRNL, Westinghouse Electric Company, Shaw, PBMR (Pty) Ltd., and Technology Insights under a Technical Consulting Agreement (TCA). Westinghouse Electric, serving as the lead for the PBMR process heat application team, established a cost-shared TCA with SRNL to prepare an updated HyS thermochemical water-splitting process flowsheet, a nuclear hydrogen plant preconceptual design and a cost estimate, including the cost of hydrogen production. SRNL was funded by DOE under the NHI program, and the Westinghouse team was self-funded. The results of this work are presented in this Final Report. Appendices have been attached to provide a detailed source of information in order to document the work under the TCA contract.« less

Excess of Methyl Donor in the Perinatal Period Reduces Postnatal Leptin Secretion in Rat and Interacts with the Effect of Protein Content in Diet

PubMed Central

Giudicelli, Fanny; Brabant, Anne-Laure; Grit, Isabelle; Parnet, Patricia; Amarger, Valérie

2013-01-01

Methionine, folic acid, betaine and choline interact in the one-carbon metabolism which provides methyl groups for methylation reactions. An optimal intake of these nutrients during pregnancy is required for successful completion of fetal development and evidence is growing that they could be involved in metabolic long-term programming. However, the biological pathways involved in the action of these nutrients are still poorly known. This study investigated the interaction between methyl donors and protein content in maternal diet during the preconceptual, pregnancy and lactation periods and the consequences on the rat offspring in the short and long term. Methyl donor supplementation reduced leptin secretion in offspring, whereas insulin levels were mostly affected by protein restriction. The joint effect of protein restriction and methyl donor excess strongly impaired postnatal growth in both gender and long term weight gain in male offspring only, without affecting food intake. In addition, rats born from protein restricted and methyl donor supplemented dams gained less weight when fed a hypercaloric diet. Methylation of the leptin gene promoter in adipose tissue was increased in methyl donor supplemented groups but not affected by protein restriction only. These results suggest that maternal methyl donor supplementation may influence energy homeostasis in a gender-dependent manner, without affecting food intake. Moreover, we showed that macronutrients and micronutrients in maternal diet interact to influence the programming of the offspring. PMID:23840890

Excess of methyl donor in the perinatal period reduces postnatal leptin secretion in rat and interacts with the effect of protein content in diet.

PubMed

Giudicelli, Fanny; Brabant, Anne-Laure; Grit, Isabelle; Parnet, Patricia; Amarger, Valérie

2013-01-01

Methionine, folic acid, betaine and choline interact in the one-carbon metabolism which provides methyl groups for methylation reactions. An optimal intake of these nutrients during pregnancy is required for successful completion of fetal development and evidence is growing that they could be involved in metabolic long-term programming. However, the biological pathways involved in the action of these nutrients are still poorly known. This study investigated the interaction between methyl donors and protein content in maternal diet during the preconceptual, pregnancy and lactation periods and the consequences on the rat offspring in the short and long term. Methyl donor supplementation reduced leptin secretion in offspring, whereas insulin levels were mostly affected by protein restriction. The joint effect of protein restriction and methyl donor excess strongly impaired postnatal growth in both gender and long term weight gain in male offspring only, without affecting food intake. In addition, rats born from protein restricted and methyl donor supplemented dams gained less weight when fed a hypercaloric diet. Methylation of the leptin gene promoter in adipose tissue was increased in methyl donor supplemented groups but not affected by protein restriction only. These results suggest that maternal methyl donor supplementation may influence energy homeostasis in a gender-dependent manner, without affecting food intake. Moreover, we showed that macronutrients and micronutrients in maternal diet interact to influence the programming of the offspring.

Molecular fragil X screening in normal populations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spence, W.C.; Black, S.H.; Fallon, L.

In December, 1993, we initiated a pilot project in which DNA fragile X (fraX) testing was offered during routine prenatal or genetic counseling to all pregnant women seen at the Genetics & IVF Institute, most of whom were referred for the indication of advanced maternal age. A brochure on fragile X syndrome was sent to each patient prior to her appointment and was reviewed by a counselor or physician during the counseling session. As of June 1995, 3,345 patients were offered testing; 474 women with no identified family history of mental retardation or learning disability and 214 women with amore » positive family history accepted the test on a self-pay basis. The second population screened was 271 potential donors in our anonymous egg donor program. DNA from blood was tested by Southern blot using EcoRI/EagI and StB12.3. If an expansion was detected, CGG repeat number was determined by PCR-based analysis. Among the 474 patients with unremarkable family histories, three fraX carriers were identified (repeat sizes = 60+), whereas none were found in the 214 patients with a positive family history. Among the potential egg donors, two high borderline patients were identified (repeat sizes = between 50 and 59). Our ongoing study indicates that screening of pregnant or preconceptual populations for fraX carrier status using DNA testing is accepted by many patients and is an important addition to current medical practice. 12 refs., 1 tab.« less

The reproduction in women affected by cooley disease

PubMed Central

Pafumi, Carlo; Leanza, Vito; Coco, Luana; Vizzini, Stefania; Ciotta, Lilliana; Messina, Alessandra; Leanza, Gianluca; Zarbo, Giuseppe; D'Agati, Alfio; Palumbo, Marco Antonio; Iemmola, Alessandra; Gulino, Ferdinando Antonio; Teodoro, Maria Cristina; Attard, Matthew; Plesca, Alina Cristina; Soares, Catarina; Kouloubis, Nina; Chammas, Mayada

2011-01-01

The health background management and outcomes of 5 pregnancies in 4 women affected by Cooley Disease, from Paediatric Institute of Catania University, are described, considering the preconceptual guidances and cares for such patients. These patients were selected among a group of 100 thalassemic women divided into three subgroups, according to their first and successive menstruation characteristics: i) patients with primitive amenorrhoea, ii) patients with secondary amenorrhoea and iii) patients with normal menstruation. Only one woman, affected by primitive amenorrhoea, needed the induction of ovulation. A precise and detailed pre-pregnancy assessment was effected before each conception. This was constituted by a series of essays, including checks for diabetes and hypothyroidism, for B and C hepatitis and for blood group antibodies. Moreover were evaluated: cardiac function, rubella immunity and transaminases. Other pregnancy monitoring, and cares during labour and delivery were effected according to usual obstetrics practice. All the women were in labour when she were 38 week pregnant, and the outcome were five healthy babies born at term, weighting between 2600 and 3200gs. The only complication was the Caesarean section. The improvements of current treatments, especially in the management of iron deposits, the prolongation of survival rate, will result in a continuous increase of pregnancies in thalassemic women. Pregnancy is now a real possibility for women affected by such disease. We are furthermore studying the possibility to collect the fetus' umbilical cord blood, after the delivery, to attempt eterologus transplantation to his mother trying to get a complete marrow reconstitution. PMID:22184526

Creep of A508/533 Pressure Vessel Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard Wright

2014-08-01

ABSTRACT Evaluation of potential Reactor Pressure Vessel (RPV) steels has been carried out as part of the pre-conceptual Very High Temperature Reactor (VHTR) design studies. These design studies have generally focused on American Society of Mechanical Engineers (ASME) Code status of the steels, temperature limits, and allowable stresses. Initially, three candidate materials were identified by this process: conventional light water reactor (LWR) RPV steels A508 and A533, 2¼Cr-1Mo in the annealed condition, and Grade 91 steel. The low strength of 2¼Cr-1Mo at elevated temperature has eliminated this steel from serious consideration as the VHTR RPV candidate material. Discussions with themore » very few vendors that can potentially produce large forgings for nuclear pressure vessels indicate a strong preference for conventional LWR steels. This preference is based in part on extensive experience with forging these steels for nuclear components. It is also based on the inability to cast large ingots of the Grade 91 steel due to segregation during ingot solidification, thus restricting the possible mass of forging components and increasing the amount of welding required for completion of the RPV. Grade 91 steel is also prone to weld cracking and must be post-weld heat treated to ensure adequate high-temperature strength. There are also questions about the ability to produce, and very importantly, verify the through thickness properties of thick sections of Grade 91 material. The availability of large components, ease of fabrication, and nuclear service experience with the A508 and A533 steels strongly favor their use in the RPV for the VHTR. Lowering the gas outlet temperature for the VHTR to 750°C from 950 to 1000°C, proposed in early concept studies, further strengthens the justification for this material selection. This steel is allowed in the ASME Boiler and Pressure Vessel Code for nuclear service up to 371°C (700°F); certain excursions above that temperature are allowed by Code Case N-499-2 (now incorporated as an appendix to Section III Division 5 of the Code). This Code Case was developed with a rather sparse data set and focused primarily on rolled plate material (A533 specification). Confirmatory tests of creep behavior of both A508 and A533 are described here that are designed to extend the database in order to build higher confidence in ensuring the structural integrity of the VHTR RPV during off-normal conditions. A number of creep-rupture tests were carried out at temperatures above the 371°C (700°F) Code limit; longer term tests designed to evaluate minimum creep behavior are ongoing. A limited amount of rupture testing was also carried out on welded material. All of the rupture data from the current experiments is compared to historical values from the testing carried out to develop Code Case N-499-2. It is shown that the A508/533 basemetal tested here fits well with the rupture behavior reported from the historical testing. The presence of weldments significantly reduces the time to rupture. The primary purpose of this report is to summarize and record the experimental results in a single document.« less

Pebble Bed Reactors Design Optimization Methods and their Application to the Pebble Bed Fluoride Salt Cooled High Temperature Reactor (PB-FHR)

NASA Astrophysics Data System (ADS)

Cisneros, Anselmo Tomas, Jr.

The Fluoride salt cooled High temperature Reactor (FHR) is a class of advanced nuclear reactors that combine the robust coated particle fuel form from high temperature gas cooled reactors, direct reactor auxillary cooling system (DRACS) passive decay removal of liquid metal fast reactors, and the transparent, high volumetric heat capacitance liquid fluoride salt working fluids---flibe (33%7Li2F-67%BeF)---from molten salt reactors. This combination of fuel and coolant enables FHRs to operate in a high-temperature low-pressure design space that has beneficial safety and economic implications. In 2012, UC Berkeley was charged with developing a pre-conceptual design of a commercial prototype FHR---the Pebble Bed- Fluoride Salt Cooled High Temperature Reactor (PB-FHR)---as part of the Nuclear Energy University Programs' (NEUP) integrated research project. The Mark 1 design of the PB-FHR (Mk1 PB-FHR) is 236 MWt flibe cooled pebble bed nuclear heat source that drives an open-air Brayton combine-cycle power conversion system. The PB-FHR's pebble bed consists of a 19.8% enriched uranium fuel core surrounded by an inert graphite pebble reflector that shields the outer solid graphite reflector, core barrel and reactor vessel. The fuel reaches an average burnup of 178000 MWt-d/MT. The Mk1 PB-FHR exhibits strong negative temperature reactivity feedback from the fuel, graphite moderator and the flibe coolant but a small positive temperature reactivity feedback of the inner reflector and from the outer graphite pebble reflector. A novel neutronics and depletion methodology---the multiple burnup state methodology was developed for an accurate and efficient search for the equilibrium composition of an arbitrary continuously refueled pebble bed reactor core. The Burnup Equilibrium Analysis Utility (BEAU) computer program was developed to implement this methodology. BEAU was successfully benchmarked against published results generated with existing equilibrium depletion codes VSOP and PEBBED for a high temperature gas cooled pebble bed reactor. Three parametric studies were performed for exploring the design space of the PB-FHR---to select a fuel design for the PB-FHR] to select a core configuration; and to optimize the PB-FHR design. These parametric studies investigated trends in the dependence of important reactor performance parameters such as burnup, temperature reactivity feedback, radiation damage, etc on the reactor design variables and attempted to understand the underlying reactor physics responsible for these trends. A pebble fuel parametric study determined that pebble fuel should be designed with a carbon to heavy metal ratio (C/HM) less than 400 to maintain negative coolant temperature reactivity coefficients. Seed and thorium blanket-, seed and inert pebble reflector- and seed only core configurations were investigated for annular FHR PBRs---the C/HM of the blanket pebbles and discharge burnup of the thorium blanket pebbles were additional design variable for core configurations with thorium blankets. Either a thorium blanket or graphite pebble reflector is required to shield the outer graphite reflector enough to extend its service lifetime to 60 EFPY. The fuel fabrication costs and long cycle lengths of the thorium blanket fuel limit the potential economic advantages of using a thorium blanket. Therefore, the seed and pebble reflector core configuration was adopted as the baseline core configuration. Multi-objective optimization with respect to economics was performed for the PB-FHR accounting for safety and other physical design constraints derived from the high-level safety regulatory criteria. These physical constraints were applied along in a design tool, Nuclear Application Value Estimator, that evaluated a simplified cash flow economics model based on estimates of reactor performance parameters calculated using correlations based on the results of parametric design studies for a specific PB-FHR design and a set of economic assumptions about the electricity market to evaluate the economic implications of design decisions. The optimal PB-FHR design---Mark 1 PB-FHR---is described along with a detailed summary of its performance characteristics including: the burnup, the burnup evolution, temperature reactivity coefficients, the power distribution, radiation damage distributions, control element worths, decay heat curves and tritium production rates. The Mk1 PB-FHR satisfies the PB-FHR safety criteria. The fuel, moderator (pebble core, pebble shell, graphite matrix, TRISO layers) and coolant have global negative temperature reactivity coefficients and the fuel temperatures are well within their limits.

The Nuclear Cryogenic Propulsion Stage

NASA Technical Reports Server (NTRS)

Houts, Michael G.; Kim, Tony; Emrich, William J.; Hickman, Robert R.; Broadway, Jeramie W.; Gerrish, Harold P.; Belvin, Anthony D.; Borowski, Stanley K.; Scott, John H.

2014-01-01

Nuclear Thermal Propulsion (NTP) development efforts in the United States have demonstrated the technical viability and performance potential of NTP systems. For example, Project Rover (1955 - 1973) completed 22 high power rocket reactor tests. Peak performances included operating at an average hydrogen exhaust temperature of 2550 K and a peak fuel power density of 5200 MW/m3 (Pewee test), operating at a thrust of 930 kN (Phoebus-2A test), and operating for 62.7 minutes in a single burn (NRX-A6 test). Results from Project Rover indicated that an NTP system with a high thrust-to-weight ratio and a specific impulse greater than 900 s would be feasible. Excellent results were also obtained by the former Soviet Union. Although historical programs had promising results, many factors would affect the development of a 21st century nuclear thermal rocket (NTR). Test facilities built in the US during Project Rover no longer exist. However, advances in analytical techniques, the ability to utilize or adapt existing facilities and infrastructure, and the ability to develop a limited number of new test facilities may enable affordable development, qualification, and utilization of a Nuclear Cryogenic Propulsion Stage (NCPS). Bead-loaded graphite fuel was utilized throughout the Rover/NERVA program, and coated graphite composite fuel (tested in the Nuclear Furnace) and cermet fuel both show potential for even higher performance than that demonstrated in the Rover/NERVA engine tests.. NASA's NCPS project was initiated in October, 2011, with the goal of assessing the affordability and viability of an NCPS. FY 2014 activities are focused on fabrication and test (non-nuclear) of both coated graphite composite fuel elements and cermet fuel elements. Additional activities include developing a pre-conceptual design of the NCPS stage and evaluating affordable strategies for NCPS development, qualification, and utilization. NCPS stage designs are focused on supporting human Mars missions. The NCPS is being designed to readily integrate with the Space Launch System (SLS). A wide range of strategies for enabling affordable NCPS development, qualification, and utilization should be considered. These include multiple test and demonstration strategies (both ground and in-space), multiple potential test sites, and multiple engine designs. Two potential NCPS fuels are currently under consideration - coated graphite composite fuel and tungsten cermet fuel. During 2014 a representative, partial length (approximately 16") coated graphite composite fuel element with prototypic depleted uranium loading is being fabricated at Oak Ridge National Laboratory (ORNL). In addition, a representative, partial length (approximately 16") cermet fuel element with prototypic depleted uranium loading is being fabricated at Marshall Space Flight Center (MSFC). During the development process small samples (approximately 3" length) will be tested in the Compact Fuel Element Environmental Tester (CFEET) at high temperature (approximately 2800 K) in a hydrogen environment to help ensure that basic fuel design and manufacturing process are adequate and have been performed correctly. Once designs and processes have been developed, longer fuel element segments will be fabricated and tested in the Nuclear Thermal Rocket Element Environmental Simulator (NTREE) at high temperature (approximately 2800 K) and in flowing hydrogen.

Investigation of alternative layouts for the supercritical carbon dioxide Brayton cycle for a sodium-cooled fast reactor.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moisseytsev, A.; Sienicki, J. J.

2009-07-01

Analyses of supercritical carbon dioxide (S-CO{sub 2}) Brayton cycle performance have largely settled on the recompression supercritical cycle (or Feher cycle) incorporating a flow split between the main compressor downstream of heat rejection, a recompressing compressor providing direct compression without heat rejection, and high and low temperature recuperators to raise the effectiveness of recuperation and the cycle efficiency. Alternative cycle layouts have been previously examined by Angelino (Politecnico, Milan), by MIT (Dostal, Hejzlar, and Driscoll), and possibly others but not for sodium-cooled fast reactors (SFRs) operating at relatively low core outlet temperature. Thus, the present authors could not be suremore » that the recompression cycle is an optimal arrangement for application to the SFR. To ensure that an advantageous alternative layout has not been overlooked, several alternative cycle layouts have been investigated for a S-CO{sub 2} Brayton cycle coupled to the Advanced Burner Test Reactor (ABTR) SFR preconceptual design having a 510 C core outlet temperature and a 470 C turbine inlet temperature to determine if they provide any benefit in cycle performance (e.g., enhanced cycle efficiency). No such benefits were identified, consistent with the previous examinations, such that attention was devoted to optimizing the recompression supercritical cycle. The effects of optimizing the cycle minimum temperature and pressure are investigated including minimum temperatures and/or pressures below the critical values. It is found that improvements in the cycle efficiency of 1% or greater relative to previous analyses which arbitrarily fixed the minimum temperature and pressure can be realized through an optimal choice of the combination of the minimum cycle temperature and pressure (e.g., for a fixed minimum temperature there is an optimal minimum pressure). However, this leads to a requirement for a larger cooler for heat rejection which may impact the tradeoff between efficiency and capital cost. In addition, for minimum temperatures below the critical temperature, a lower heat sink temperature is required the availability of which is dependent upon the climate at the specific plant site.« less

Pre-conceptual and prenatal supplementary folic acid and multivitamin intake, behavioral problems, and hyperkinetic disorders: A study based on the Danish National Birth Cohort (DNBC).

PubMed

Virk, Jasveer; Liew, Zeyan; Olsen, Jørn; Nohr, Ellen A; Catov, Janet M; Ritz, Beate

2018-06-01

To evaluate whether early folic acid or multivitamin supplementation during pregnancy prevents diagnosis of hyperkinetic disorders (HKD), treatment for attention deficit hyperactivity disorder (ADHD), and ADHD-like behaviors reported by parents participating in the DNBC for children at age 7. HKD diagnosis and ADHD medication use data were obtained from the Danish National Hospital, Central Psychiatric and Pharmaceutical registers. We estimated hazard ratios (HRs) for HKD diagnosis and ADHD medication use and risk ratios (RRs) for parent-reported ADHD behavior collected with the Strength and Difficulties Questionnaire (SDQ), comparing children whose mothers took folic acid or multivitamin supplements early in pregnancy defined as starting periconceptionally (4 weeks prior to their last menstrual period (LMP)) through 8 weeks after their LMP (4-8 weeks), to children whose mothers indicated no supplement use for the same entire period. We identified 384 children (1.1%) with a hospital diagnosis for HKD and 642 children (1.8%) treated with ADHD medication. We found no association between risk of HKD diagnosis or intake of ADHD medication and early maternal folic acid use. However, early multivitamin use was associated with an approximately 30% reduction in risk for HKD diagnosis (aHR: 0.70, 95% CI: 0.52-0.96) and 21% reduction in treatment with ADHD medication (aHR: 0.79, 95% CI: 0.62-0.98). We observed a reduced risk in parent-reported ADHD behaviors, but these results were attenuated after adjustment. Our data suggest that multivitamin use in early pregnancy may reduce risk for HKD diagnosis and treatment for ADHD in the offspring.

Canadian Consensus on Female Nutrition: Adolescence, Reproduction, Menopause, and Beyond.

PubMed

O'Connor, Deborah L; Blake, Jennifer; Bell, Rhonda; Bowen, Angela; Callum, Jeannie; Fenton, Shanna; Gray-Donald, Katherine; Rossiter, Melissa; Adamo, Kristi; Brett, Kendra; Khatri, Nasreen; Robinson, Nicole; Tumback, Lindsay; Cheung, Anthony

2016-06-01

To provide health care professionals in Canada with the basic knowledge and tools to provide nutrition guidance to women through their lifecycle. Optimal nutrition through the female lifecycle was evaluated, with specific focus on adolescence, pre-conception, pregnancy, postpartum, menopause, and beyond. The guideline begins with an overview of guidance for all women, followed by chapters that examine the evidence and provide recommendations for the promotion of healthy nutrition and body weight at each life stage. Nutrients of special concern and other considerations unique to each life stage are discussed in each chapter. Published literature, governmental and health agency reports, clinical practice guidelines, grey literature, and textbook sources were used in supporting the recommendations made in this document. The quality of evidence was rated using the criteria described in the report of the Canadian Task Force on Preventive Health Care. CHAPTER 2: GENERAL FEMALE NUTRITION: Summary Statements Recommendations CHAPTER 3: ADOLESCENCE NUTRITION: Summary Statements Recommendations CHAPTER 4: PRE-CONCEPTUAL NUTRITION: Summary Statement Recommendations CHAPTER 5: NUTRITION IN PREGNANCY: Summary Statements Recommendations CHAPTER 6: POSTPARTUM NUTRITION AND LACTATION: Summary Statements Recommendations CHAPTER 7: NUTRITION DURING MENOPAUSE AND BEYOND: Summary Statement Recommendations. Copyright © 2016 The Society of Obstetricians and Gynaecologists of Canada/La Société des obstétriciens et gynécologues du Canada. Published by Elsevier Inc. All rights reserved.

Design and Demonstration of a Material-Plasma Exposure Target Station for Neutron Irradiated Samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapp, Juergen; Aaron, A. M.; Bell, Gary L.

2015-10-20

Fusion energy is the most promising energy source for the future, and one of the most important problems to be solved progressing to a commercial fusion reactor is the identification of plasma-facing materials compatible with the extreme conditions in the fusion reactor environment. The development of plasma–material interaction (PMI) science and the technology of plasma-facing components are key elements in the development of the next step fusion device in the United States, the so-called Fusion Nuclear Science Facility (FNSF). All of these PMI issues and the uncertain impact of the 14-MeV neutron irradiation have been identified in numerous expert panelmore » reports to the fusion community. The 2007 Greenwald report classifies reactor plasma-facing materials (PFCs) and materials as the only Tier 1 issues, requiring a “. . . major extrapolation from the current state of knowledge, need for qualitative improvements and substantial development for both the short and long term.” The Greenwald report goes on to list 19 gaps in understanding and performance related to the plasma–material interface for the technology facilities needed for DEMO-oriented R&D and DEMO itself. Of the 15 major gaps, six (G7, G9, G10, G12, G13) can possibly be addressed with ORNL’s proposal of an advanced Material Plasma Exposure eXperiment. Establishing this mid-scale plasma materials test facility at ORNL is a key element in ORNL’s strategy to secure a leadership role for decades of fusion R&D. That is to say, our end goal is to bring the “signature facility” FNSF home to ORNL. This project is related to the pre-conceptual design of an innovative target station for a future Material–Plasma Exposure eXperiment (MPEX). The target station will be designed to expose candidate fusion reactor plasma-facing materials and components (PFMs and PFCs) to conditions anticipated in fusion reactors, where PFCs will be exposed to dense high-temperature hydrogen plasmas providing steady-state heat fluxes of 5–20 MW/m 2 and ion fluxes up to 10 24 m -2s -1. Since PFCs will have to withstand neutron irradiation displacement damage up to 50 dpa, the target station design must accommodate radioactive specimens (materials to be irradiated in HFIR or at SNS) to enable investigations of the impact of neutron damage on materials. Therefore, the system will have to be able to install and extract irradiated specimens using equipment and methods to avoid sample modification, control contamination, and minimize worker dose. Included in the design considerations will be an assessment of all the steps between neutron irradiation and post-exposure materials examination/characterization, as well as an evaluation of the facility hazard categorization. In particular, the factors associated with the acquisition of radioactive specimens and their preparation, transportation, experimental configuration at the plasma-specimen interface, post-plasma-exposure sample handling, and specimen preparation will be evaluated. Neutronics calculations to determine the dose rates of the samples were carried out for a large number of potential plasma-facing materials.« less

Cancer in children of nuclear industry employees: report on children aged under 25 years from nuclear industry family study.

PubMed

Roman, E; Doyle, P; Maconochie, N; Davies, G; Smith, P G; Beral, V

1999-05-29

To determine whether children of men and women occupationally exposed to ionising radiation are at increased risk of developing leukaemia or other cancers before their 25th birthday. Cohort study of children of nuclear industry employees. Nuclear establishments operated by the Atomic Energy Authority, Atomic Weapons Establishment, and British Nuclear Fuels. 39 557 children of male employees and 8883 children of female employees. Cancer incidence in offspring reported by parents. Employment and radiation monitoring data (including annual external dose) supplied by the nuclear authorities. 111 cancers were reported, of which 28 were leukaemia. The estimated standardised incidence ratios for children of male and female employees who were born in 1965 or later were 98 (95% confidence interval 73 to 129) and 96 (50 to 168) for all malignancies and 109 (61 to 180) and 95 (20 to 277) for leukaemia. The leukaemia rate in children whose fathers had accumulated a preconceptual dose of >/=100 mSv was 5.8 times that in children conceived before their fathers' employment in the nuclear industry (95% confidence interval 1.3 to 24.8) but this was based on only three exposed cases. Two of these cases were included in the west Cumbrian ("Gardner") case-control study. No significant trends were found between increasing dose and leukaemia. Cancer in young people is rare, and our results are based on small numbers of events. Overall, the findings suggest that the incidence of cancer and leukaemia among children of nuclear industry employees is similar to that in the general population. The possibility that exposure of fathers to relatively high doses of ionising radiation before their child's conception might be related to an increased risk of leukaemia in their offspring could not be disproved, but this result was based on only three cases, two of which have been previously reported. High conceptual doses are rare, and even if the occupational association were causal, the number of leukaemias involved would be small; in this study of over 46 000 children, fewer than three leukaemias could potentially be attributed to such an exposure.

Earth at Rest. Aesthetic Experience and Students' Grounding in Science Education

NASA Astrophysics Data System (ADS)

Østergaard, Edvin

2017-07-01

Focus of this article is the current situation characterized by students' de-rootedness and possible measures to improve the situation within the frame of education for sustainable development. My main line of argument is that science teachers can practice teaching in such a way that students are brought in deeper contact to the environment. I discuss efforts to promote aesthetic experience in science class and in science teacher education. Within a wide range of definitions, my main understanding of aesthetic experience is that of pre-conceptual experience, relational to the environment and incorporated in students' embodied knowledge. I ground the idea of Earth at rest in Husserl's phenomenological philosophy and Heidegger's notion of science' deprivation of the world. A critique of the ontological reversal leads to an ontological re-reversal that implies giving lifeworld experience back its value and rooting scientific concepts in students' everyday lives. Six aspects of facilitating grounding in sustainability-oriented science teaching and teacher education are highlighted and discussed: students' everyday knowledge and experience, aesthetic experience and grounding, fostering aesthetic sensibility, cross-curricular integration with art, ontological and epistemological aspects, and belongingness and (re-)connection to Earth. I conclude that both science students and student-teachers need to practice their sense of caring and belonging, as well as refining their sensibility towards the world. With an intension of educating for a sustainable development, there is an urgent need for a critical discussion in science education when it comes to engaging learners for a sustainable future.

Clinical and scientific results in perinatal care of pregnancy complicated by insulin dependent diabetes mellitus in Croatia.

PubMed

Djelmis, J

1998-01-01

At the Department of Obstetrics and Gynecology, Perinatal Unit for Diabetes and Fetal Growth, School of Medicine, Zagreb, perinatal care of pregnancies complicated with insulin dependent diabetes melitus (IDDM), has been performed for more than 36 years. The intention of this review is to show our own results in the management of IDDM pregnancies and the latest clinical advances in perinatal care of such pregnancies. Pregnancy complicated with IDDM is at risk because of numerous maternal, fetal and neonatal complications. Recent advances in medicine, especially in diabetology and perinatology, helps clinician avoid or lessen antenatal or perinatal complications in IDDM pregnancies. The main result of improved perinatal care is that today fetal and neonatal mortality in IDDM pregnancy is almost equal to that of healthy pregnant population. Intensive preconceptual care and optimal regulation of IDDM have resulted not only in decreased perinatal mortality but also in a decreased rate of congenital malformation. Tight glycemia control during pregnancy has a beneficial effect on fetal growth. Intensive control of fetal growth, verification of lung maturation at term by amniocenthesis, and control of fetal oxygenation will result in delivery of a mature eutrophic newborn with the lowest rate of neonatal complications possible. Perinatal mortality of less than 2% in IDDM pregnancy can be obtained by planned delivery between 38 and 39 weeks of gestation by either vaginal route or cesarean section, depending on indications. After delivery, intensive care of the newborn is necessary.

Pregnancy-associated malaria and malaria in infants: an old problem with present consequences.

PubMed

Moya-Alvarez, Violeta; Abellana, Rosa; Cot, Michel

2014-07-11

Albeit pregnancy-associated malaria (PAM) poses a potential risk for over 125 million women each year, an accurate review assessing the impact on malaria in infants has yet to be conducted. In addition to an effect on low birth weight (LBW) and prematurity, PAM determines foetal exposure to Plasmodium falciparum in utero and is correlated to congenital malaria and early development of clinical episodes during infancy. This interaction plausibly results from an ongoing immune tolerance process to antigens in utero, however, a complete explanation of this immune process remains a question for further research, as does the precise role of protective maternal antibodies. Preventive interventions against PAM modify foetal exposure to P. falciparum in utero, and have thus an effect on perinatal malaria outcomes. Effective intermittent preventive treatment in pregnancy (IPTp) diminishes placental malaria (PM) and its subsequent malaria-associated morbidity. However, emerging resistance to sulphadoxine-pyrimethamine (SP) is currently hindering the efficacy of IPTp regimes and the efficacy of alternative strategies, such as intermittent screening and treatment (IST), has not been accurately evaluated in different transmission settings. Due to the increased risk of clinical malaria for offspring of malaria infected mothers, PAM preventive interventions should ideally start during the preconceptual period. Innovative research examining the effect of PAM on the neurocognitive development of the infant, as well as examining the potential influence of HLA-G polymorphisms on malaria symptoms, is urged to contribute to a better understanding of PAM and infant health.

Prevalence of Principles of Piaget’s Theory Among 4-7-year-old Children and their Correlation with IQ

PubMed Central

Marwaha, Sugandha; Vashist, Binny

2017-01-01

Introduction Cognitive development is a major area of human development and was extensively studied by Jean Piaget. He proposed that the development of intellectual abilities occurs in a series of relatively distinct stages and that a child’s way of thinking and viewing the world is different at different stages. Aim To assess Piaget’s principles of the intuitive stage of preoperational period among 4-7-year-old children relative to their Intelligence quotient (IQ). Materials and Methods Various characteristics as described by Jean Piaget specific for the age group of 4-7 years along with those of the previous (preconceptual stage of preoperational period) and successive periods (concrete operations) were analysed using various experiments in 300 children. These characteristics included the concepts of perceptual and cognitive egocentrism, centration and reversibility. IQ of the children was measured using Seguin form board test. Inferential statistics were performed using Chi-square test and Kruskal Wallis test. The level of statistical significance was set at 0.05. Results The prevalence of perceptual and cognitive egocentrism was 10.7% and 31.7% based on the experiments and 33% based on the interview question. Centration was present in 96.3% of the children. About 99% children lacked the concept of reversibility according to the clay experiment while 97.7% possessed this concept according to the interview question. The mean IQ score of children who possessed perceptual egocentrism, cognitive egocentrism and egocentrism in dental setting was significantly higher than those who lacked these characteristics. Conclusion Perceptual egocentrism had almost disappeared and prevalence of cognitive egocentrism decreased with increase in age. Centration and lack of reversibility were appreciated in most of the children. There was a gradual reduction in the prevalence of these characters with increasing age. Mean IQ score of children who possessed perceptual egocentrism, cognitive egocentrism and egocentrism in dental setting was higher. PMID:28969287

Prevalence of Principles of Piaget's Theory Among 4-7-year-old Children and their Correlation with IQ.

PubMed

Marwaha, Sugandha; Goswami, Mousumi; Vashist, Binny

2017-08-01

Cognitive development is a major area of human development and was extensively studied by Jean Piaget. He proposed that the development of intellectual abilities occurs in a series of relatively distinct stages and that a child's way of thinking and viewing the world is different at different stages. To assess Piaget's principles of the intuitive stage of preoperational period among 4-7-year-old children relative to their Intelligence quotient (IQ). Various characteristics as described by Jean Piaget specific for the age group of 4-7 years along with those of the previous (preconceptual stage of preoperational period) and successive periods (concrete operations) were analysed using various experiments in 300 children. These characteristics included the concepts of perceptual and cognitive egocentrism, centration and reversibility. IQ of the children was measured using Seguin form board test. Inferential statistics were performed using Chi-square test and Kruskal Wallis test. The level of statistical significance was set at 0.05. The prevalence of perceptual and cognitive egocentrism was 10.7% and 31.7% based on the experiments and 33% based on the interview question. Centration was present in 96.3% of the children. About 99% children lacked the concept of reversibility according to the clay experiment while 97.7% possessed this concept according to the interview question. The mean IQ score of children who possessed perceptual egocentrism, cognitive egocentrism and egocentrism in dental setting was significantly higher than those who lacked these characteristics. Perceptual egocentrism had almost disappeared and prevalence of cognitive egocentrism decreased with increase in age. Centration and lack of reversibility were appreciated in most of the children. There was a gradual reduction in the prevalence of these characters with increasing age. Mean IQ score of children who possessed perceptual egocentrism, cognitive egocentrism and egocentrism in dental setting was higher.

The role of the pediatrician in preventing congenital malformations.

PubMed

Brent, Robert L

2011-10-01

• The development of new knowledge and new diagnostic techniques and technology as well as the sophistication of epidemiology studies and maturation of the fields of clinical genetics and clinical teratology have revolutionized the field of reproductive and developmental biology.• Advances have enabled physicians and scientists to determine the causes of developmental abnormalities and, therefore, discover methods of prevention. The process of evaluation is based on the knowledge base developed over the past 50 years.• Although genetic abnormalities are responsible for a significant proportion of reproductive and developmental deleterious effects, a larger proportion of these effects are due to unknown causes.• Environmental causes are less frequent, although many of the environmental effects as well as many of the genetic effects can be prevented through genetic counseling and preconceptual planning. Effective treatment and amelioration of developmental effects also have improved.• More than 50 environmental drugs, chemicals, maternal diseases, infections, nutritional abnormalities, and physical agents can affect reproduction deleteriously and result in CMs.Theoretically, all these causes are preventable.• Throughout the developing world, the addition of folic acid and iodine could prevent tens of thousands of birth defects and developmental abnormalities.• In the United States, the opportunity for prevention can be introduced at the population level and by addressing individual patients’ clinical problems.• If a mother of a malformed infant had some type of exposure during pregnancy, such as a diagnostic radiologic examination or medication, the consulting physician should not support or suggest the possibility of a causal relationship before performing a complete evaluation. If a pregnant woman who has not yet delivered had some type of exposure during pregnancy, the consulting physician should not support or suggest the possibility that the fetus is at increased risk before performing a complete evaluation. • Every patient deserves a complete, scholarly evaluation that uses the basic principles of teratology and risk analysis.

Environmental risk factors for autism: do they help cause de novo genetic mutations that contribute to the disorder?

PubMed

Kinney, Dennis K; Barch, Daniel H; Chayka, Bogdan; Napoleon, Siena; Munir, Kerim M

2010-01-01

Recent research has discovered that a number of genetic risk factors for autism are de novo mutations. Advanced parental age at the time of conception is associated with increased risk for both autism and de novo mutations. We investigated the hypothesis that other environmental factors associated with increased risk for autism might also be mutagenic and contribute to autism by causing de novo mutations. A survey of the research literature identified 9 environmental factors for which increased pre-conceptual exposure appears to be associated with increased risk for autism. Five of these factors--mercury, cadmium, nickel, trichloroethylene, and vinyl chloride--are established mutagens. Another four--including residence in regions that are urbanized, located at higher latitudes, or experience high levels of precipitation--are associated with decreased sun exposure and increased risk for vitamin D deficiency. Vitamin D plays important roles in repairing DNA damage and protecting against oxidative stress--a key cause of DNA damage. Factors associated with vitamin D deficiency will thus contribute to higher mutation rates and impaired repair of DNA. We note how de novo mutations may also help explain why the concordance rate for autism is so markedly higher in monozygotic than dizygotic twins. De novo mutations may also explain in part why the prevalence of autism is so remarkably high, given the evidence for a strong role of genetic factors and the low fertility of individuals with autism--and resultant selection pressure against autism susceptibility genes. These several lines of evidence provide support for the hypothesis, and warrant new research approaches--which we suggest--to address limitations in existing studies. The hypothesis has implications for understanding possible etiologic roles of de novo mutations in autism, and it suggests possible approaches to primary prevention of the disorder, such as addressing widespread vitamin D deficiency and exposure to known mutagens.

R&D for a Soft X-Ray Free Electron Laser Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corlett, John; Attwood, David; Byrd, John

2009-06-08

Several recent reports have identified the scientific requirements for a future soft x-ray light source, and a high-repetition-rate free-electron laser (FEL) facility that is responsive to these requirements is now on the horizon. R&D in some critical areas is needed, however, to demonstrate technical performance, thus reducing technical risks and construction costs. Such a facility most likely will be based on a CW superconducting linear accelerator with beam supplied by a high-brightness, high-repetition-rate photocathode electron gun operating in CW mode, and on an array of FELs to which the accelerated beam is distributed, each operating at high repetition rate andmore » with even pulse spacing. Dependent on experimental requirements, the individual FELs can be configured for either self-amplified spontaneous emission (SASE), seeded, or oscillator mode of operation, including the use of high-gain harmonic generation (HGHG), echo-enhanced harmonic generation (EEHG), harmonic cascade, or other configurations. In this White Paper we identify the overall accelerator R&D needs, and highlight the most important pre-construction R&D tasks required to value-engineer the design configuration and deliverables for such a facility. In Section 1.4 we identify the comprehensive R&D ultimately needed. We identify below the highest-priority requirements for understanding machine performance and reduce risk and costs at this pre-conceptual design stage. Details of implementing the required tasks will be the subject of future evaluation. Our highest-priority R&D program is the injector, which must be capable of delivering a beam with bunches up to a nanocoulomb at MHz repetition rate and with normalized emittance {le} 1 mm {center_dot} mrad. This will require integrated accelerating structure, cathode, and laser systems development. Cathode materials will impact the choice of laser technology in wavelength and energy per pulse, as well as vacuum requirements in the accelerating structure. Demonstration experiments in advanced seeding techniques, such as EEHG, and other optical manipulations to enhance the FEL process are required to reduce technical risk in producing temporally coherent and ultrashort x-ray output using optical seed lasers. Success of EEHG in particular would result in reduced development and cost of laser systems and accelerator hardware for seeded FELs. With a 1.5-2.5 GeV linac, FELs could operate in the VUV-soft x-ray range, where the actual beam energy will be determined by undulator technology; for example, to use the lower energy would require the use of advanced designs for which undulator R&D is needed. Significant reductions in both unit costs and accelerator costs resulting from the lower electron beam energy required to achieve lasing at a particular wavelength could be obtained with undulator development. Characterization of the wakefields of the vacuum chambers in narrow-gap undulators will be needed to minimize risk in ability to deliver close to transform limited pulses. CW superconducting RF technology for an FEL facility with short bunches at MHz rate and up to mA average current will require selection of design choices in cavity frequency and geometry, higher order mode suppression and power dissipation, RF power supply and distribution, accelerating gradient, and cryogenics systems. R&D is needed to define a cost and performance optimum. Developments in laser technology are proceeding at rapid pace, and progress in high-power lasers, harmonic generation, and tunable sources will need to be tracked.« less

Diet and long-term health: an African Diaspora perspective.

PubMed

Solomons, Noel W

2003-01-01

The life-stage approach, which views the behaviours and exposures of an individual from the preconceptual situation of the parent through pregnancy, infancy, childhood and adolescence, and into the advancing years through adulthood, is the basis of analysis of strategies to improve long-term health. Among the behaviours of note is the dietary selection pattern, conditioning our exposure to nutrients and dietary constituents that influences growth, nutriture, cognitive and physical performance, and disease resistance and susceptibility. The African Diaspora created a population displaced from Africa to the Western Hemisphere as part of the African slave trade from the 16th to 18th centuries. It continues to manifest distinct dietary and lifestyle practices in the context of a health experience that is different both from the population in their African countries of origin and from the other ethnicities in their countries of displacement and current residence. Afro-Americans are more susceptible to a series of diseases and conditions including low birth weight, violence, and HIV/AIDS, as well as the non-communicable diseases: obesity, diabetes mellitus, cardiovascular disease, hypertension, stroke, renal failure, breast cancer, prostate cancer and lead poisoning. The differential nature of dietary practices are conditioned at times by the poverty and marginalisation of the populace, resulting in either disadvantageous or beneficial outcomes relative to others' eating habits. Serious consideration must be given to the possibility that ethnic difference give rise to different requirements and tolerances for essential nutrients and distinct protective or adverse responses to foods and dietary substances. The major challenges to health improvement for the African Diaspora is coming to grips with the policy and programmatic nuances of differential treatment and the effecting the behavioural changes that would be needed in a population skeptical of the motives of media and of the power elites of their societies.

Challenging embryological theories on congenital diaphragmatic hernia: future therapeutic implications for paediatric surgery.

PubMed Central

Jesudason, E. C.

2002-01-01

Lung hypoplasia is central to the poor prognosis of babies with congenital diaphragmatic hernia (CDH). Prolapse of abdominal organs through a diaphragmatic defect has traditionally been thought to impair lung growth by compression. The precise developmental biology of CDH remains unresolved. Refractory to fetal correction, lung hypoplasia in CDH may instead originate during embryogenesis and before visceral herniation. Resolving these conflicting hypotheses may lead to reappraisal of current clinical strategies. Genetic studies in murine models and the fruitfly, Drosophila melanogaster are elucidating the control of normal respiratory organogenesis. Branchless and breathless are Drosophila mutants lacking fibroblast growth factor (FGF) and its cognate receptor (FGFR), respectively. Sugarless and sulphateless mutants lack enzymes essential for heparan sulphate (HS) biosynthesis. Phenotypically, all these mutants share abrogated airway branching. Mammalian organ culture and transgenic models confirm the essential interaction of FGFs and HS during airway ramification. Embryonic airway development (branching morphogenesis) occurs in a defined spatiotemporal sequence. Unlike the surgically-created lamb model, the nitrofen rat model permits investigation of embryonic lung growth in CDH. Microdissecting embryonic lung primordia from the nitrofen CDH model and normal controls, we demonstrated that disruption of stereotyped airway branching correlates with and precedes subsequent CDH formation. To examine disturbed branching morphogenesis longitudinally, we characterised a system that preserves lung hypoplasia in organ culture. We tested FGFs and heparin (an HS analogue) as potential therapies on normal and hypoplastic lungs. Observing striking differences in morphological response to FGFs between normal and hypoplastic lung primordia, we postulated abnormalities of FGF/HS signalling in the embryonic CDH lung. Evaluating this hypothesis further, we examined effects of an HS-independent growth factor (epidermal growth factor, EGF) on hypoplastic lung development. Visible differences in morphological response indicate an intrinsic abnormality of hypoplastic lung primordia that may involve shared targets of FGFs and EGE. These studies indicate that lung hypoplasia precedes diaphragmatic hernia and may involve disturbances of mitogenic signalling pathways fundamental to embryonic lung development. What does this imply for human CDH? Fetal surgery may be 'too little, too late' to correct an established lung embryopathy. In utero growth factor therapy may permit antenatal lung rescue. Prevention of the birth defect by preconceptual prophylaxis may represent the ultimate solution. Images Figure 1 Figure 2 Figure 3 Figure 4 Figure 6 PMID:12215028

The Neural Correlates of Mindful Awareness: A Possible Buffering Effect on Anxiety-Related Reduction in Subgenual Anterior Cingulate Cortex Activity

PubMed Central

Hakamata, Yuko; Iwase, Mikio; Kato, Takashi; Senda, Kohei; Inada, Toshiya

2013-01-01

Background Human personality consists of two fundamental elements character and temperament. Character allays automatic and preconceptual emotional responses determined by temperament. However, the neurobiological basis of character and its interplay with temperament remain elusive. Here, we examined character-temperament interplay and explored the neural basis of character, with a particular focus on the subgenual anterior cingulate cortex extending to a ventromedial portion of the prefrontal cortex (sgACC/vmPFC). Methods Resting brain glucose metabolism (GM) was measured using [18F] fluorodeoxyglucose positron emission tomography in 140 healthy adults. Personality traits were assessed using the Temperament and Character Inventory. Regions of interest (ROI) analysis and whole-brain analysis were performed to examine a combination effect of temperament and character on the sgACC/vmPFC and to explore the neural correlates of character, respectively. Results Harm avoidance (HA), a temperament trait (i.e., depressive, anxious, vulnerable), showed a significant negative impact on the sgACC/vmPFC GM, whereas self-transcendence (ST), a character trait (i.e., intuitive, judicious, spiritual), exhibited a significant positive effect on GM in the same region (HA β = −0.248, p = 0.003; ST: β = 0.250, p = 0.003). In addition, when coupled with strong ST, individuals with strong HA maintained the sgACC/vmPFC GM level comparable to the level of those with low scores on both HA and ST. Furthermore, exploratory whole-brain analysis revealed a significant positive relationship between ST and sgACC/vmPFC GM (peak voxel at x = −8, y = 32, z = −8, k = 423, Z = 4.41, corrected p FDR = 0.030). Conclusion The current findings indicate that the sgACC/vmPFC might play a critical role in mindful awareness to something beyond as well as in emotional regulation. Developing a sense of mindfulness may temper exaggerated emotional responses in individuals with a risk for or having anxiety and depressive disorders. PMID:24130715

The neural correlates of mindful awareness: a possible buffering effect on anxiety-related reduction in subgenual anterior cingulate cortex activity.

PubMed

Hakamata, Yuko; Iwase, Mikio; Kato, Takashi; Senda, Kohei; Inada, Toshiya

2013-01-01

Human personality consists of two fundamental elements character and temperament. Character allays automatic and preconceptual emotional responses determined by temperament. However, the neurobiological basis of character and its interplay with temperament remain elusive. Here, we examined character-temperament interplay and explored the neural basis of character, with a particular focus on the subgenual anterior cingulate cortex extending to a ventromedial portion of the prefrontal cortex (sgACC/vmPFC). Resting brain glucose metabolism (GM) was measured using [(18)F] fluorodeoxyglucose positron emission tomography in 140 healthy adults. Personality traits were assessed using the Temperament and Character Inventory. Regions of interest (ROI) analysis and whole-brain analysis were performed to examine a combination effect of temperament and character on the sgACC/vmPFC and to explore the neural correlates of character, respectively. Harm avoidance (HA), a temperament trait (i.e., depressive, anxious, vulnerable), showed a significant negative impact on the sgACC/vmPFC GM, whereas self-transcendence (ST), a character trait (i.e., intuitive, judicious, spiritual), exhibited a significant positive effect on GM in the same region (HA β = -0.248, p = 0.003; ST: β = 0.250, p = 0.003). In addition, when coupled with strong ST, individuals with strong HA maintained the sgACC/vmPFC GM level comparable to the level of those with low scores on both HA and ST. Furthermore, exploratory whole-brain analysis revealed a significant positive relationship between ST and sgACC/vmPFC GM (peak voxel at x = -8, y = 32, z = -8, k = 423, Z = 4.41, corrected p (FDR) = 0.030). The current findings indicate that the sgACC/vmPFC might play a critical role in mindful awareness to something beyond as well as in emotional regulation. Developing a sense of mindfulness may temper exaggerated emotional responses in individuals with a risk for or having anxiety and depressive disorders.

Enhanced Chemical Cleaning: A New Process for Chemically Cleaning Savannah River Waste Tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ketusky, Edward; Spires, Renee; Davis, Neil

2009-02-11

At the Savannah River Site (SRS) there are 49 High Level Waste (HLW) tanks that eventually must be emptied, cleaned, and closed. The current method of chemically cleaning SRS HLW tanks, commonly referred to as Bulk Oxalic Acid Cleaning (BOAC), requires about a half million liters (130,000 gallons) of 8 weight percent (wt%) oxalic acid to clean a single tank. During the cleaning, the oxalic acid acts as the solvent to digest sludge solids and insoluble salt solids, such that they can be suspended and pumped out of the tank. Because of the volume and concentration of acid used, amore » significant quantity of oxalate is added to the HLW process. This added oxalate significantly impacts downstream processing. In addition to the oxalate, the volume of liquid added competes for the limited available tank space. A search, therefore, was initiated for a new cleaning process. Using TRIZ (Teoriya Resheniya Izobretatelskikh Zadatch or roughly translated as the Theory of Inventive Problem Solving), Chemical Oxidation Reduction Decontamination with Ultraviolet Light (CORD-UV{reg_sign}), a mature technology used in the commercial nuclear power industry was identified as an alternate technology. Similar to BOAC, CORD-UV{reg_sign} also uses oxalic acid as the solvent to dissolve the metal (hydr)oxide solids. CORD-UV{reg_sign} is different, however, since it uses photo-oxidation (via peroxide/UV or ozone/UV to form hydroxyl radicals) to decompose the spent oxalate into carbon dioxide and water. Since the oxalate is decomposed and off-gassed, CORD-UV{reg_sign} would not have the negative downstream oxalate process impacts of BOAC. With the oxalate destruction occurring physically outside the HLW tank, re-precipitation and transfer of the solids, as well as regeneration of the cleaning solution can be performed without adding additional solids, or a significant volume of liquid to the process. With a draft of the pre-conceptual Enhanced Chemical Cleaning (ECC) flowsheet, taking full advantage of the many CORD-UV{reg_sign} benefits, performance demonstration testing was initiated using available SRS sludge simulant. The demonstration testing confirmed that ECC is a viable technology, as it can dissolve greater than 90% of the sludge simulant and destroy greater than 90% of the oxalates. Additional simulant and real waste testing are planned.« less

Space Reflector Materials for Prometheus Application

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Nash; V. Munne; LL Stimely

2006-01-31

The two materials studied in depth which appear to have the most promise in a Prometheus reflector application are beryllium (Be) and beryllium oxide (BeO). Three additional materials, magnesium oxide (MgO), alumina (Al{sub 2}O{sub 3}), and magnesium aluminate spinel (MgAl{sub 2}O{sub 4}) were also recently identified to be of potential interest, and may have promise in a Prometheus application as well, but are expected to be somewhat higher mass than either a Be or BeO based reflector. Literature review and analysis indicates that material properties for Be are largely known, but there are gaps in the properties of Be0 relativemore » to the operating conditions for a Prometheus application. A detailed preconceptual design information document was issued providing material properties for both materials (Reference (a)). Beryllium oxide specimens were planned to be irradiated in the JOY0 Japanese test reactor to partially fill the material property gaps, but more testing in the High Flux Isotope Reactor (HFIR) test reactor at Oak Ridge National Laboratory (ORNL) was expected to be needed. A key issue identified for BeO was obtaining material for irradiation testing with an average grain size of {approx}5 micrometers, reminiscent of material for which prior irradiation test results were promising. Current commercially available material has an average grain size of {approx}10 micrometers. The literature indicated that improved irradiation performance could be expected (e.g., reduced irradiation-induced swelling) with the finer grain size material. Confirmation of these results would allow the use of historic irradiated materials test results from the literature, reducing the extent of required testing and therefore the cost of using this material. Environmental, safety and health (ES&H) concerns associated with manufacturing are significant but manageable for Be and BeO. Although particulate-generating operations (e.g., machining, grinding, etc.) involving Be-bearing materials require significant controls, handling of clean, finished products requires only modest controls. Neither material was initially considered to be viable as a structural material, however, based on improved understanding of its unirradiated properties, Be should be evaluated due to having potentially acceptable structural properties in the unirradiated condition, i. e., during launch, when loads might be most limiting. All three of the alternative materials are non-hazardous, and thus do not engender the ES&H concerns associated with use of Be or BeO. Aluminum oxide is a widely available ceramic material with well characterized physical properties and well developed processing practices. Although the densest (3.97 g/cm{sup 3} versus Be: 1.85, BeO: 3.01, MgO: 3.58, and MgAl{sub 2}O{sub 4}: 3.60, all theoretical density), and therefore the heaviest, of all the materials considered for this application, its ease of fabrication, mechanical properties, availability and neutronic characteristics warrant its evaluation. Similarly, MgO is widely used in the refractory materials industry and has a large established manufacturing base while being lighter than Al{sub 2}O{sub 3}. Most of the commercially available MgO products incorporate additives or a second phase to avoid the formation of Mg(OH){sub 2} due to spontaneous reaction with ambient humidity. The hygroscopicity of MgO makes it a more difficult material to work with than Al{sub 2}O{sub 3} or MgAl{sub 2}O{sub 4}. Magnesium aluminate spinel, although not as widely available as either Al{sub 2}O{sub 3} or MgO, has the advantage of a density almost as low as MgO without being hygroscopic, and shares comparable neutronic performance characteristics in the reflector application.« less

Extension of the supercritical carbon dioxide brayton cycle to low reactor power operation: investigations using the coupled anl plant dynamics code-SAS4A/SASSYS-1 liquid metal reactor code system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moisseytsev, A.; Sienicki, J. J.

2012-05-10

Significant progress has been made on the development of a control strategy for the supercritical carbon dioxide (S-CO{sub 2}) Brayton cycle enabling removal of power from an autonomous load following Sodium-Cooled Fast Reactor (SFR) down to decay heat levels such that the S-CO{sub 2} cycle can be used to cool the reactor until decay heat can be removed by the normal shutdown heat removal system or a passive decay heat removal system such as Direct Reactor Auxiliary Cooling System (DRACS) loops with DRACS in-vessel heat exchangers. This capability of the new control strategy eliminates the need for use of amore » separate shutdown heat removal system which might also use supercritical CO{sub 2}. It has been found that this capability can be achieved by introducing a new control mechanism involving shaft speed control for the common shaft joining the turbine and two compressors following reduction of the load demand from the electrical grid to zero. Following disconnection of the generator from the electrical grid, heat is removed from the intermediate sodium circuit through the sodium-to-CO{sub 2} heat exchanger, the turbine solely drives the two compressors, and heat is rejected from the cycle through the CO{sub 2}-to-water cooler. To investigate the effectiveness of shaft speed control, calculations are carried out using the coupled Plant Dynamics Code-SAS4A/SASSYS-1 code for a linear load reduction transient for a 1000 MWt metallic-fueled SFR with autonomous load following. No deliberate motion of control rods or adjustment of sodium pump speeds is assumed to take place. It is assumed that the S-CO{sub 2} turbomachinery shaft speed linearly decreases from 100 to 20% nominal following reduction of grid load to zero. The reactor power is calculated to autonomously decrease down to 3% nominal providing a lengthy window in time for the switchover to the normal shutdown heat removal system or for a passive decay heat removal system to become effective. However, the calculations reveal that the compressor conditions are calculated to approach surge such that the need for a surge control system for each compressor is identified. Thus, it is demonstrated that the S-CO{sub 2} cycle can operate in the initial decay heat removal mode even with autonomous reactor control. Because external power is not needed to drive the compressors, the results show that the S-CO{sub 2} cycle can be used for initial decay heat removal for a lengthy interval in time in the absence of any off-site electrical power. The turbine provides sufficient power to drive the compressors. Combined with autonomous reactor control, this represents a significant safety advantage of the S-CO{sub 2} cycle by maintaining removal of the reactor power until the core decay heat falls to levels well below those for which the passive decay heat removal system is designed. The new control strategy is an alternative to a split-shaft layout involving separate power and compressor turbines which had previously been identified as a promising approach enabling heat removal from a SFR at low power levels. The current results indicate that the split-shaft configuration does not provide any significant benefits for the S-CO{sub 2} cycle over the current single-shaft layout with shaft speed control. It has been demonstrated that when connected to the grid the single-shaft cycle can effectively follow the load over the entire range. No compressor speed variation is needed while power is delivered to the grid. When the system is disconnected from the grid, the shaft speed can be changed as effectively as it would be with the split-shaft arrangement. In the split-shaft configuration, zero generator power means disconnection of the power turbine, such that the resulting system will be almost identical to the single-shaft arrangement. Without this advantage of the split-shaft configuration, the economic benefits of the single-shaft arrangement, provided by just one turbine and lower losses at the design point, are more important to the overall cycle performance. Therefore, the single-shaft configuration shall be retained as the reference arrangement for S-CO{sub 2} cycle power converter preconceptual designs. Improvements to the ANL Plant Dynamics Code have been carried out. The major code improvement is the introduction of a restart capability which simplifies investigation of control strategies for very long transients. Another code modification is transfer of the entire code to a new Intel Fortran complier; the execution of the code using the new compiler was verified by demonstrating that the same results are obtained as when the previous Compaq Visual Fortran compiler was used.« less

Improving the design of maintenance studies for bipolar disorder.

PubMed

Gitlin, Michael J; Abulseoud, Osama; Frye, Mark A

2010-08-01

In contrast to the trial design of acute mania studies, there is no standard design for bipolar maintenance studies. Over the past 15 years, the design of monotherapy maintenance studies in bipolar disorder has evolved significantly, but recent study designs continue to differ in important ways. We reviewed the design of recent controlled bipolar maintenance studies, using PubMed, from August 2006 to August 2009, examining the strengths and weaknesses of different study design features. Design differences are sufficiently important that the disparate results across maintenance studies may reflect either true differences in medication efficacy or the effects of these design differences on outcome. Design elements such as recent episode polarity, stabilization criteria, using enriched versus nonenriched samples, length of stabilization before randomization, length of experimental phase, and recurrence outcome criteria are critical factors that differ widely across studies and likely play a role in study outcome. As consensus for trial designs for bipolar maintenance therapy is developed, it will be easier to develop algorithms for maintenance treatment based on results from studies as opposed to clinical opinions.

Visual Design Principles: An Empirical Study of Design Lore

ERIC Educational Resources Information Center

Kimball, Miles A.

2013-01-01

Many books, designers, and design educators talk about visual design principles such as balance, contrast, and alignment, but with little consistency. This study uses empirical methods to explore the lore surrounding design principles. The study took the form of two stages: a quantitative literature review to determine what design principles are…

Study/experimental/research design: much more than statistics.

PubMed

Knight, Kenneth L

2010-01-01

The purpose of study, experimental, or research design in scientific manuscripts has changed significantly over the years. It has evolved from an explanation of the design of the experiment (ie, data gathering or acquisition) to an explanation of the statistical analysis. This practice makes "Methods" sections hard to read and understand. To clarify the difference between study design and statistical analysis, to show the advantages of a properly written study design on article comprehension, and to encourage authors to correctly describe study designs. The role of study design is explored from the introduction of the concept by Fisher through modern-day scientists and the AMA Manual of Style. At one time, when experiments were simpler, the study design and statistical design were identical or very similar. With the complex research that is common today, which often includes manipulating variables to create new variables and the multiple (and different) analyses of a single data set, data collection is very different than statistical design. Thus, both a study design and a statistical design are necessary. Scientific manuscripts will be much easier to read and comprehend. A proper experimental design serves as a road map to the study methods, helping readers to understand more clearly how the data were obtained and, therefore, assisting them in properly analyzing the results.

Does design matter? Systematic evaluation of the impact of analytical choices on effect estimates in observational studies

PubMed Central

Ryan, Patrick B.; Schuemie, Martijn

2013-01-01

Background: Clinical studies that use observational databases, such as administrative claims and electronic health records, to evaluate the effects of medical products have become commonplace. These studies begin by selecting a particular study design, such as a case control, cohort, or self-controlled design, and different authors can and do choose different designs for the same clinical question. Furthermore, published papers invariably report the study design but do not discuss the rationale for the specific choice. Studies of the same clinical question with different designs, however, can generate different results, sometimes with strikingly different implications. Even within a specific study design, authors make many different analytic choices and these too can profoundly impact results. In this paper, we systematically study heterogeneity due to the type of study design and due to analytic choices within study design. Methods and findings: We conducted our analysis in 10 observational healthcare databases but mostly present our results in the context of the GE Centricity EMR database, an electronic health record database containing data for 11.2 million lives. We considered the impact of three different study design choices on estimates of associations between bisphosphonates and four particular health outcomes for which there is no evidence of an association. We show that applying alternative study designs can yield discrepant results, in terms of direction and significance of association. We also highlight that while traditional univariate sensitivity analysis may not show substantial variation, systematic assessment of all analytical choices within a study design can yield inconsistent results ranging from statistically significant decreased risk to statistically significant increased risk. Our findings show that clinical studies using observational databases can be sensitive both to study design choices and to specific analytic choices within study design. Conclusion: More attention is needed to consider how design choices may be impacting results and, when possible, investigators should examine a wide array of possible choices to confirm that significant findings are consistently identified. PMID:25083251

Empirical studies of design software: Implications for software engineering environments

NASA Technical Reports Server (NTRS)

Krasner, Herb

1988-01-01

The empirical studies team of MCC's Design Process Group conducted three studies in 1986-87 in order to gather data on professionals designing software systems in a range of situations. The first study (the Lift Experiment) used thinking aloud protocols in a controlled laboratory setting to study the cognitive processes of individual designers. The second study (the Object Server Project) involved the observation, videotaping, and data collection of a design team of a medium-sized development project over several months in order to study team dynamics. The third study (the Field Study) involved interviews with the personnel from 19 large development projects in the MCC shareholders in order to study how the process of design is affected by organizationl and project behavior. The focus of this report will be on key observations of design process (at several levels) and their implications for the design of environments.

Study/Experimental/Research Design: Much More Than Statistics

PubMed Central

Knight, Kenneth L.

2010-01-01

Abstract Context: The purpose of study, experimental, or research design in scientific manuscripts has changed significantly over the years. It has evolved from an explanation of the design of the experiment (ie, data gathering or acquisition) to an explanation of the statistical analysis. This practice makes “Methods” sections hard to read and understand. Objective: To clarify the difference between study design and statistical analysis, to show the advantages of a properly written study design on article comprehension, and to encourage authors to correctly describe study designs. Description: The role of study design is explored from the introduction of the concept by Fisher through modern-day scientists and the AMA Manual of Style. At one time, when experiments were simpler, the study design and statistical design were identical or very similar. With the complex research that is common today, which often includes manipulating variables to create new variables and the multiple (and different) analyses of a single data set, data collection is very different than statistical design. Thus, both a study design and a statistical design are necessary. Advantages: Scientific manuscripts will be much easier to read and comprehend. A proper experimental design serves as a road map to the study methods, helping readers to understand more clearly how the data were obtained and, therefore, assisting them in properly analyzing the results. PMID:20064054

How to Construct a Mixed Methods Research Design.

PubMed

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

Design Study for A Low-Cost LH2 Turbopump

NASA Technical Reports Server (NTRS)

Japikse, David; Baines, Nicholas; Platt, Michael J.

2000-01-01

A preliminary design study, focusing on potential component selections and design for manufacturing and assembly (DFMAR1) analysis, is presented in this study. The investigation focused on a nominal cost liquid hydrogen turbopump suitable for a private launch class vehicle. Utilizing a "turbocharger-like" design philosophy, preliminary feasibility studies of the basic pump design class, the rotordynamic design class, and the turbine design class were conducted with associated DFMA evaluations. Reasonable cost levels and sensible levels of product assurance have been established.

Urban Environment Development based on Universal Design Principles

NASA Astrophysics Data System (ADS)

Harsritanto, Bangun Ir

2018-02-01

Universal Design is a design which facilitated full range of human diversity. By applying Universal design principles, urban environment can be more functional and more user-friendly for everyone. This study examined five urban streets of South Korea as a country experienced on developing various urban street designs based on universal design. This study aimed to examine and compare the South Korea cases using seven principles of universal design. The research methods of this study are literature study, case study, and site observation. The results of this study are: South Korea cases are good practices, urgency of implementing the direction into local regulations; and change of urban development paradigm.

Collaboration between Industrial Designers and Design Engineers - Comparing the Understanding of Design Intent.

PubMed

Laursen, Esben Skov; Møller, Louise

2015-01-01

This paper describes a case study comparing the understanding of design intent between industrial designers and design engineers. The study is based on the hypothesis that it is not all aspects of the design intent that are equally difficult to share between industrial designers and design engineers in the product development process. The study builds on five semi-structured interviews, where two industrial designers and three design engineers were interviewed about different aspects of the design intent. Based on our results, there seem to be indications that the more complex and abstract elements of industrial design knowledge such as the meaning, semantics, values, emotions and social aspects of the product are less shared by the design engineers. Moreover, the results also indicate that the different aspects of the design intent are perceived separately, rather than as part of a whole by the design engineers. The connection between the different aspects of the design intent is not shared between the industrial designer and design engineer making the shared knowledge less meaningful to the design engineers. The results of this study cannot be claimed to be conclusive due to the limited empirical material. Further investigation and analytically richer data are required in order to verify and broaden the findings. More case studies have therefore been planned in order to understand the area better.

The case-control design in veterinary sciences: A survey.

PubMed

Cullen, Jonah N; Sargeant, Jan M; Makielski, Kelly M; O'Connor, Annette M

2016-11-01

The case-control study design is deceptively simple. However, many design considerations influence the estimated effect measure. An investigation of case-control studies in the human health literature suggested that some of these considerations are not described in reports of case-control studies. Our hypothesis was that the majority of veterinary studies labeled as case-controls would be incident density designs, and many would not interpret the effect measure obtained from those studies as the rate ratio rather than the odds ratio. Reference databases were searched for author-designated case-control studies. A survey of 100 randomly selected studies was conducted to examine the different design options described and estimated effect measures. Of the 100 author-identified case-control studies, 83 assessed an exposure-outcome association and, of those, only 54 (65.1%) sampled the study population based on an outcome and would thus be considered case-control designs. Twelve studies were incidence density designs but none used this terminology. Of the studies that reported an odds ratio as the effect measure, none reported on additional considerations that would have enabled a more interpretable result. This survey indicated many case-control-labeled studies were not case-control designs and among case-control studies, key design aspects were not often described. The absence of information about study design elements and underlying assumptions in case-control studies limits the ability to establish the effect measured by the study and the evidentiary value of the study might be underestimated. Copyright © 2016 Elsevier B.V. All rights reserved.

Power Systems Design and Studies | Grid Modernization | NREL

Science.gov Websites

Design and Studies Power Systems Design and Studies NREL develops new tools, algorithms, and market design and performance evaluations; and planning, operations, and protection studies. Photo of two researchers looking at a screen showing a distribution grid map Current design and planning tools for the

How system designers think: a study of design thinking in human factors engineering.

PubMed

Papantonopoulos, Sotiris

2004-11-01

The paper presents a descriptive study of design thinking in human factors engineering. The objective of the study is to analyse the role of interpretation in design thinking and the role of design practice in guiding interpretation. The study involved 10 system designers undertaking the allocation of cognitive functions in three production planning and control task scenarios. Allocation decisions were recorded and verbal protocols of the design process were collected to elicit the subjects' thought processes. Verbal protocol analysis showed that subjects carried out the design of cognitive task allocation as a problem of applying a selected automation technology from their initial design deliberations. This design strategy stands in contrast to the predominant view of system design that stipulates that user requirements should be thoroughly analysed prior to making any decisions about technology. Theoretical frameworks from design research and ontological design showed that the system design process may be better understood by recognizing the role of design hypotheses in system design, as well as the diverse interactions between interpretation and practice, means and ends, and design practice and the designer's pre-understanding which shape the design process. Ways to balance the bias exerted on the design process were discussed.

A Parallel Trade Study Architecture for Design Optimization of Complex Systems

NASA Technical Reports Server (NTRS)

Kim, Hongman; Mullins, James; Ragon, Scott; Soremekun, Grant; Sobieszczanski-Sobieski, Jaroslaw

2005-01-01

Design of a successful product requires evaluating many design alternatives in a limited design cycle time. This can be achieved through leveraging design space exploration tools and available computing resources on the network. This paper presents a parallel trade study architecture to integrate trade study clients and computing resources on a network using Web services. The parallel trade study solution is demonstrated to accelerate design of experiments, genetic algorithm optimization, and a cost as an independent variable (CAIV) study for a space system application.

Study design in medical research: part 2 of a series on the evaluation of scientific publications.

PubMed

Röhrig, Bernd; du Prel, Jean-Baptist; Blettner, Maria

2009-03-01

The scientific value and informativeness of a medical study are determined to a major extent by the study design. Errors in study design cannot be corrected afterwards. Various aspects of study design are discussed in this article. Six essential considerations in the planning and evaluation of medical research studies are presented and discussed in the light of selected scientific articles from the international literature as well as the authors' own scientific expertise with regard to study design. The six main considerations for study design are the question to be answered, the study population, the unit of analysis, the type of study, the measuring technique, and the calculation of sample size. This article is intended to give the reader guidance in evaluating the design of studies in medical research. This should enable the reader to categorize medical studies better and to assess their scientific quality more accurately.

The active comparator, new user study design in pharmacoepidemiology: historical foundations and contemporary application

PubMed Central

Lund, Jennifer L.; Richardson, David B.; Stürmer, Til

2016-01-01

Better understanding of biases related to selective prescribing of, and adherence to, preventive treatments has led to improvements in the design and analysis of pharmacoepidemiologic studies. One influential development has been the “active comparator, new user” study design, which seeks to emulate the design of a head-to-head randomized controlled trial. In this review, we first discuss biases that may affect pharmacoepidemiologic studies and describe their direction and magnitude in a variety of settings. We then present the historical foundations of the active comparator, new user study design and explain how this design conceptually mitigates biases leading to a paradigm shift in pharmacoepidemiology. We offer practical guidance on the implementation of the study design using administrative databases. Finally, we provide an empirical example in which the active comparator, new user study design addresses biases that have previously impeded pharmacoepidemiologic studies. PMID:26954351

Instructional Design: Case Studies in Communities of Practice

ERIC Educational Resources Information Center

Keppell, Michael, Ed.

2007-01-01

"Instructional Design: Case Studies in Communities of Practice" documents real-world experiences of instructional designers and staff developers who work in communities of practice. "Instructional Design: Case Studies in Communities of Practice" explains the strategies and heuristics used by instructional designers when working…

Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review.

PubMed

Mazzucca, Stephanie; Tabak, Rachel G; Pilar, Meagan; Ramsey, Alex T; Baumann, Ana A; Kryzer, Emily; Lewis, Ericka M; Padek, Margaret; Powell, Byron J; Brownson, Ross C

2018-01-01

The need for optimal study designs in dissemination and implementation (D&I) research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions. We reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention); had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized); design type [e.g., cluster randomized controlled trial (RCT)]; data type (e.g., quantitative); D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion. Of the 404 protocols reviewed, 212 (52%) studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge) increased over time. Fewer studies were quasi-experimental (17%) or observational (6%). Many study design categories (e.g., controlled pre-post, matched pair cluster design) were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%), with the remaining 39% proposing only quantitative. Half of protocols (52%) reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE-AIM ( n  = 16 each), followed by Promoting Action on Research Implementation in Health Services and Theoretical Domains Framework ( n  = 12 each). While several novel designs for D&I research have been proposed (e.g., stepped wedge, adaptive designs), the majority of the studies in our sample employed RCT designs. Alternative study designs are increasing in use but may be underutilized for a variety of reasons, including preference of funders or lack of awareness of these designs. Promisingly, the prevalent use of quantitative and qualitative methods together reflects methodological innovation in newer D&I research.

Public Interest in Medical Research Participation: Does It Matter if Patients or Community Members Have Helped Design the Study?

PubMed

Cobb, Enesha M; Gebremariam, Achamyeleh; Singer, Dianne; Davis, Matthew M

2015-10-01

We determined national levels of public participation in medical research study design. We compared public interest in medical research participation (MRP) in studies overall, versus studies explicitly designed with public involvement. Cross-sectional household survey of US population in June 2013. Descriptive statistics estimated participation in medical research study design. Chi-square test compared levels of interest in MRP if respondent knew patients or community members helped design the study. Of 2,048 respondents (participation rate 60%), 5% knew someone who had helped design a medical research study. There was no association between having known someone or personal participation in study design and willingness to engage in MRP. Although the overall proportion of respondents who would consider MRP initially (51%) was similar to the proportion who would consider MRP with community member involvement in study design (49%), the changes in respondents' views across the different scenarios were significantly greater than what would have been expected by chance. We found similar levels of interest in MRP whether or not the public is involved in medical research study design. This finding may indicate that public involvement in study design, like community-based participatory research, may not affect overall rates of MRP. © 2015 Wiley Periodicals, Inc.

Designing a Pediatric Study for an Antimalarial Drug by Using Information from Adults

PubMed Central

Jullien, Vincent; Samson, Adeline; Guedj, Jérémie; Kiechel, Jean-René; Zohar, Sarah; Comets, Emmanuelle

2015-01-01

The objectives of this study were to design a pharmacokinetic (PK) study by using information about adults and evaluate the robustness of the recommended design through a case study of mefloquine. PK data about adults and children were available from two different randomized studies of the treatment of malaria with the same artesunate-mefloquine combination regimen. A recommended design for pediatric studies of mefloquine was optimized on the basis of an extrapolated model built from adult data through the following approach. (i) An adult PK model was built, and parameters were estimated by using the stochastic approximation expectation-maximization algorithm. (ii) Pediatric PK parameters were then obtained by adding allometry and maturation to the adult model. (iii) A D-optimal design for children was obtained with PFIM by assuming the extrapolated design. Finally, the robustness of the recommended design was evaluated in terms of the relative bias and relative standard errors (RSE) of the parameters in a simulation study with four different models and was compared to the empirical design used for the pediatric study. Combining PK modeling, extrapolation, and design optimization led to a design for children with five sampling times. PK parameters were well estimated by this design with few RSE. Although the extrapolated model did not predict the observed mefloquine concentrations in children very accurately, it allowed precise and unbiased estimates across various model assumptions, contrary to the empirical design. Using information from adult studies combined with allometry and maturation can help provide robust designs for pediatric studies. PMID:26711749

Mariner Jupiter/Saturn 1977 infrared interferometer spectrometer (MJS' 77) design study

NASA Technical Reports Server (NTRS)

1974-01-01

A design study of the Infrared Interferometer Spectrometer and Radiometer (IRIS) instrument for the Mariner Jupiter/Saturn 1977 mission was conducted. The objective of the study was to investigate a number a potential problem areas identified in previous studies and to develop the instrument system designs along the lines providing for the optimum performance obtainable with the allowable budgets. The considerations for the optical design, mechanical design, and electronic design are examined.

Concentrator enhanced solar arrays design study

NASA Technical Reports Server (NTRS)

Lott, D. R.

1978-01-01

The analysis and preliminary design of a 25 kW concentrator enhanced lightweight flexible solar array are presented. The study was organized into five major tasks: (1) assessment and specification of design requirements; (2) mechanical design; (3) electric design; (4) concentrator design; and (5) cost projection. The tasks were conducted in an iterative manner so as to best derive a baseline design selection. The objectives of the study are discussed and comparative configurations and mass data on the SEP (Solar Electric Propulsion) array design, concentrator design options and configuration/mass data on the selected concentrator enhanced solar array baseline design are presented. Design requirements supporting design analysis and detailed baseline design data are discussed. The results of the cost projection analysis and new technology are also discussed.

Empirical studies of software design: Implications for SSEs

NASA Technical Reports Server (NTRS)

Krasner, Herb

1988-01-01

Implications for Software Engineering Environments (SEEs) are presented in viewgraph format for characteristics of projects studied; significant problems and crucial problem areas in software design for large systems; layered behavioral model of software processes; implications of field study results; software project as an ecological system; results of the LIFT study; information model of design exploration; software design strategies; results of the team design study; and a list of publications.

Advanced turbocharger design study program

NASA Technical Reports Server (NTRS)

Culy, D. G.; Heldenbrand, R. W.; Richardson, N. R.

1984-01-01

The advanced Turbocharger Design Study consisted of: (1) the evaluation of three advanced engine designs to determine their turbocharging requirements, and of technologies applicable to advanced turbocharger designs; (2) trade-off studies to define a turbocharger conceptual design and select the engine with the most representative requirements for turbocharging; (3) the preparation of a turbocharger conceptual design for the Curtiss Wright RC2-32 engine selected in the trade-off studies; and (4) the assessment of market impact and the preparation of a technology demonstration plan for the advanced turbocharger.

Complexity in Design-Driven Innovation: A Case Study of Knowledge Transfer Flow in Subsea Seismic Sensor Technology and Design Education

ERIC Educational Resources Information Center

Pavel, Nenad; Berg, Arild

2015-01-01

To the extent previously claimed, concept exploration is not the key to product innovation. However, companies that are design-focused are twice as innovative as those that are not. To study design-driven innovation and its occurrence in design education, two case studies are conducted. The first is an example of design practice which includes…

Design Fixation in the Wild: Design Environments and Their Influence on Fixation

ERIC Educational Resources Information Center

Youmans, Robert J.

2011-01-01

Many studies of design fixation ask designers to work in controlled laboratory or classroom environments, but innovative design work frequently occurs in dynamic, social environments. The two studies reviewed in this paper investigated how three independent variables likely to be present in many design environments affect design fixation. The…

Optimum study designs.

PubMed

Gu, C; Rao, D C

2001-01-01

Because simplistic designs will lead to prohibitively large sample sizes, the optimization of genetic study designs is critical for successfully mapping genes for complex diseases. Creative designs are necessary for detecting and amplifying the usually weak signals for complex traits. Two important outcomes of a study design--power and resolution--are implicitly tied together by the principle of uncertainty. Overemphasis on either one may lead to suboptimal designs. To achieve optimality for a particular study, therefore, practical measures such as cost-effectiveness must be used to strike a balance between power and resolution. In this light, the myriad of factors involved in study design can be checked for their effects on the ultimate outcomes, and the popular existing designs can be sorted into building blocks that may be useful for particular situations. It is hoped that imaginative construction of novel designs using such building blocks will lead to enhanced efficiency in finding genes for complex human traits.

Teaching Strategies to Promote Concept Learning by Design Challenges

ERIC Educational Resources Information Center

Van Breukelen, Dave; Van Meel, Adrianus; De Vries, Marc

2017-01-01

Background: This study is the second study of a design-based research, organised around four studies, that aims to improve student learning, teaching skills and teacher training concerning the design-based learning approach called Learning by Design (LBD). Purpose: LBD uses the context of design challenges to learn, among other things, science.…

77 FR 28883 - Cooperative Agreement To Support Innovation in Vaccine Clinical Trial Design and Collaboration in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... years there has been interest in finding innovative study designs to speed development of promising new... various types of adaptive trial designs and other innovations in clinical study designs. 2. Improving... of study designs, individual risk perception, and vaccination choice. One approach to obtain this...

Active-comparator design and new-user design in observational studies

PubMed Central

Yoshida, Kazuki; Solomon, Daniel H.; Kim, Seoyoung C.

2015-01-01

SUMMARY Over the past decade, an increasing number of observational studies have examined the effectiveness or safety of rheumatoid arthritis treatments. However, unlike randomized controlled trials (RCTs), observational studies of drug effects face methodological challenges including confounding by indication. Two design principles - active comparator design and new user design can help mitigate such challenges in observational studies. To improve validity of study findings, observational studies should be designed in such a way that makes them more closely approximate RCTs. The active comparator design compares the drug of interest to another commonly used agent for the same indication, rather than a ‘non-user’ group. This principle helps select treatment groups similar in treatment indications (both measured and unmeasured characteristics). The new user design includes a cohort of patients from the time of treatment initiation, so that it can assess patients’ pretreatment characteristics and capture all events occurring anytime during follow-up. PMID:25800216

Space Station Furnace Facility. Volume 2: Requirements definition and conceptual design study

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Freedom Furnace (SSFF) Project is divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. TBE was awarded a research study entitled, 'Space Station Furnace Facility Requirements Definition and Conceptual Design Study' on June 2, 1989. This report addresses the definition study phase only. Phase 2 is to be complete after completion of phase 1. The contract encompassed a requirements definition study and culminated in hardware/facility conceptual designs and hardware demonstration development models to test these conceptual designs. The study was divided into two parts. Part 1 (the basic part of the effort) encompassed preliminary requirements definition and assessment; conceptional design of the SSFF Core; fabrication of mockups; and preparation for the support of a conceptional design review (CoDR). Part 2 (the optional part of the effort) included detailed definition of the engineering and design requirements, as derived from the science requirements; refinement of the conceptual design of the SSFF Core; fabrication and testing of the 'breadboards' or development models; and preparation for and support of a requirements definition review.

75 FR 23775 - Agency Information Collection Activities; Proposed Collection; Comment Request; Experimental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-04

... for research entitled ``Experimental Study of Patient Information Prototypes.'' This study is designed..., the working group refined several prototypes and designed a study to investigate the usefulness of... Design and Protocol The study is experimental and will have two independent variables in a 3 x 2 design...

The Importance of Considering Differences in Study Design in Network Meta-analysis: An Application Using Anti-Tumor Necrosis Factor Drugs for Ulcerative Colitis.

PubMed

Cameron, Chris; Ewara, Emmanuel; Wilson, Florence R; Varu, Abhishek; Dyrda, Peter; Hutton, Brian; Ingham, Michael

2017-11-01

Adaptive trial designs present a methodological challenge when performing network meta-analysis (NMA), as data from such adaptive trial designs differ from conventional parallel design randomized controlled trials (RCTs). We aim to illustrate the importance of considering study design when conducting an NMA. Three NMAs comparing anti-tumor necrosis factor drugs for ulcerative colitis were compared and the analyses replicated using Bayesian NMA. The NMA comprised 3 RCTs comparing 4 treatments (adalimumab 40 mg, golimumab 50 mg, golimumab 100 mg, infliximab 5 mg/kg) and placebo. We investigated the impact of incorporating differences in the study design among the 3 RCTs and presented 3 alternative methods on how to convert outcome data derived from one form of adaptive design to more conventional parallel RCTs. Combining RCT results without considering variations in study design resulted in effect estimates that were biased against golimumab. In contrast, using the 3 alternative methods to convert outcome data from one form of adaptive design to a format more consistent with conventional parallel RCTs facilitated more transparent consideration of differences in study design. This approach is more likely to yield appropriate estimates of comparative efficacy when conducting an NMA, which includes treatments that use an alternative study design. RCTs based on adaptive study designs should not be combined with traditional parallel RCT designs in NMA. We have presented potential approaches to convert data from one form of adaptive design to more conventional parallel RCTs to facilitate transparent and less-biased comparisons.

Teaching strategies to promote concept learning by design challenges

NASA Astrophysics Data System (ADS)

Van Breukelen, Dave; Van Meel, Adrianus; De Vries, Marc

2017-07-01

Background: This study is the second study of a design-based research, organised around four studies, that aims to improve student learning, teaching skills and teacher training concerning the design-based learning approach called Learning by Design (LBD).

How Differences in Interactions Affect Learning and Development of Design Expertise in the Context of Biomedical Engineering Design

ERIC Educational Resources Information Center

Svihla, Vanessa Lynn

2009-01-01

Authentic design commonly involves teams of designers collaborating on ill-structured problems over extended time periods. Nonetheless, design has been studied extensively in sequestered settings, limiting our understanding of design as process and especially of learning design process. This study addresses potential shortcomings of such studies…

Design and implementation of observational studies to measure disease burden with a focus on stroke.

PubMed

Howard, George; Howard, Virginia J

2018-02-01

Observational epidemiological studies have the dual goals of measuring disease burden and assessing the association between exposures and outcomes. This report focuses on the first of these goals and provides an overview of design considerations of commonly used approaches, specifically community surveillance studies, cross-sectional studies, and longitudinal cohort studies. Each of these designs has strengths and weaknesses, with no study design being superior in all cases. Rather, these designs are complementary to achieve a better understanding of the burden of stroke.

Management Design Theories

NASA Astrophysics Data System (ADS)

Pries-Heje, Jan; Baskerville, Richard L.

This paper elaborates a design science approach for management planning anchored to the concept of a management design theory. Unlike the notions of design theories arising from information systems, management design theories can appear as a system of technological rules, much as a system of hypotheses or propositions can embody scientific theories. The paper illus trates this form of management design theories with three grounded cases. These grounded cases include a software process improvement study, a user involvement study, and an organizational change study. Collectively these studies demonstrate how design theories founded on technological rules can not only improve the design of information systems, but that these concepts have great practical value for improving the framing of strategic organi zational design decisions about such systems. Each case is either grounded in an empirical sense, that is to say, actual practice, or it is grounded to practices described extensively in the practical literature. Such design theories will help managers more easily approach complex, strategic decisions.

Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies

NASA Technical Reports Server (NTRS)

Burge, G. W.; Blackmon, J. B.

1973-01-01

An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware.

Experiences with an adaptive design for a dose-finding study in patients with osteoarthritis.

PubMed

Miller, Frank; Björnsson, Marcus; Svensson, Ola; Karlsten, Rolf

2014-03-01

Dose-finding studies in non-oncology areas are usually conducted in Phase II of the development process of a new potential medicine and it is key to choose a good design for such a study, as the results will decide if and how to proceed to Phase III. The present article has focus on the design of a dose-finding study for pain in osteoarthritis patients treated with the TRPV1 antagonist AZD1386. We describe different design alternatives in the planning of this study, the reasoning for choosing the adaptive design and experiences with conduct and interim analysis. Three alternatives were proposed: one single dose-finding study with parallel design, a programme with a smaller Phase IIa study followed by a Phase IIb dose-finding study, and an adaptive dose-finding study. We describe these alternatives in detail and explain why the adaptive design was chosen for the study. We give insights in design aspects of the adaptive study, which need to be pre-planned, like interim decision criteria, statistical analysis method and setup of a Data Monitoring Committee. Based on the interim analysis it was recommended to stop the study for futility since AZD1386 showed no significant pain decrease based on the primary variable. We discuss results and experiences from the conduct of the study with the novel design approach. Huge cost savings have been done compared to if the option with one dose-finding design for Phase II had been chosen. However, we point out several challenges with this approach. Copyright © 2014 Elsevier Inc. All rights reserved.

Interpretive Research Aiming at Theory Building: Adopting and Adapting the Case Study Design

ERIC Educational Resources Information Center

Diaz Andrade, Antonio

2009-01-01

Although the advantages of case study design are widely recognised, its original positivist underlying assumptions may mislead interpretive researchers aiming at theory building. The paper discusses the limitations of the case study design for theory building and explains how grounded theory systemic process adds to the case study design. The…

Development and Formative Evaluation of Multimedia Case Studies for Instructional Design and Technology Students

ERIC Educational Resources Information Center

Sugar, William

2014-01-01

This study describes the development of three case studies that included a combination of multimedia production and instructional design skills within a particular setting. These case studies incorporated real-life incidents from 47 professional instructional designers. These instructional designers described a total of 146 activities involving…

Understanding Gender, Creativity, and Entrepreneurial Intentions

ERIC Educational Resources Information Center

Smith, Ronda Marie; Sardeshmukh, Shruti R.; Combs, Gwendolyn M.

2016-01-01

Purpose: The purpose of this paper is to explore the complex relationships between gender and entrepreneurial intentions. Design/methodology/approach: This paper uses a two study design where the second study is a constructive replication of the first study. The first study uses a cross-sectional design, while the second uses a design where data…

Structural Design of Ares V Interstage Composite Structure

NASA Technical Reports Server (NTRS)

Sleigh, David W.; Sreekantamurthy, Thammaiah; Kosareo, Daniel N.; Martin, Robert A.; Johnson, Theodore F.

2011-01-01

Preliminary and detailed design studies were performed to mature composite structural design concepts for the Ares V Interstage structure as a part of NASA s Advanced Composite Technologies Project. Aluminum honeycomb sandwich and hat-stiffened composite panel structural concepts were considered. The structural design and analysis studies were performed using HyperSizer design sizing software and MSC Nastran finite element analysis software. System-level design trade studies were carried out to predict weight and margins of safety for composite honeycomb-core sandwich and composite hat-stiffened skin design concepts. Details of both preliminary and detailed design studies are presented in the paper. For the range of loads and geometry considered in this work, the hat-stiffened designs were found to be approximately 11-16 percent lighter than the sandwich designs. A down-select process was used to choose the most favorable structural concept based on a set of figures of merit, and the honeycomb sandwich design was selected as the best concept based on advantages in manufacturing cost.

A study of commuter airplane design optimization

NASA Technical Reports Server (NTRS)

Roskam, J.; Wyatt, R. D.; Griswold, D. A.; Hammer, J. L.

1977-01-01

Problems of commuter airplane configuration design were studied to affect a minimization of direct operating costs. Factors considered were the minimization of fuselage drag, methods of wing design, and the estimated drag of an airplane submerged in a propellor slipstream; all design criteria were studied under a set of fixed performance, mission, and stability constraints. Configuration design data were assembled for application by a computerized design methodology program similar to the NASA-Ames General Aviation Synthesis Program.

Radioisotope Electric Propulsion Missions Utilizing a Common Spacecraft Design

NASA Technical Reports Server (NTRS)

Fiehler, Douglas; Oleson, Steven

2004-01-01

A study was conducted that shows how a single Radioisotope Electric Propulsion (REP) spacecraft design could be used for various missions throughout the solar system. This spacecraft design is based on a REP feasibility design from a study performed by NASA Glenn Research Center and the Johns Hopkins University Applied Physics Laboratory. The study also identifies technologies that need development to enable these missions. The mission baseline for the REP feasibility design study is a Trojan asteroid orbiter. This mission sends an REP spacecraft to Jupiter s leading Lagrange point where it would orbit and examine several Trojan asteroids. The spacecraft design from the REP feasibility study would also be applicable to missions to the Centaurs, and through some change of payload configuration, could accommodate a comet sample-return mission. Missions to small bodies throughout the outer solar system are also within reach of this spacecraft design. This set of missions, utilizing the common REP spacecraft design, is examined and required design modifications for specific missions are outlined.

Statistical inference for the additive hazards model under outcome-dependent sampling.

PubMed

Yu, Jichang; Liu, Yanyan; Sandler, Dale P; Zhou, Haibo

2015-09-01

Cost-effective study design and proper inference procedures for data from such designs are always of particular interests to study investigators. In this article, we propose a biased sampling scheme, an outcome-dependent sampling (ODS) design for survival data with right censoring under the additive hazards model. We develop a weighted pseudo-score estimator for the regression parameters for the proposed design and derive the asymptotic properties of the proposed estimator. We also provide some suggestions for using the proposed method by evaluating the relative efficiency of the proposed method against simple random sampling design and derive the optimal allocation of the subsamples for the proposed design. Simulation studies show that the proposed ODS design is more powerful than other existing designs and the proposed estimator is more efficient than other estimators. We apply our method to analyze a cancer study conducted at NIEHS, the Cancer Incidence and Mortality of Uranium Miners Study, to study the risk of radon exposure to cancer.

Statistical inference for the additive hazards model under outcome-dependent sampling

PubMed Central

Yu, Jichang; Liu, Yanyan; Sandler, Dale P.; Zhou, Haibo

2015-01-01

Cost-effective study design and proper inference procedures for data from such designs are always of particular interests to study investigators. In this article, we propose a biased sampling scheme, an outcome-dependent sampling (ODS) design for survival data with right censoring under the additive hazards model. We develop a weighted pseudo-score estimator for the regression parameters for the proposed design and derive the asymptotic properties of the proposed estimator. We also provide some suggestions for using the proposed method by evaluating the relative efficiency of the proposed method against simple random sampling design and derive the optimal allocation of the subsamples for the proposed design. Simulation studies show that the proposed ODS design is more powerful than other existing designs and the proposed estimator is more efficient than other estimators. We apply our method to analyze a cancer study conducted at NIEHS, the Cancer Incidence and Mortality of Uranium Miners Study, to study the risk of radon exposure to cancer. PMID:26379363

Making intelligent systems team players: Additional case studies

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.; Rhoads, Ron W.

1993-01-01

Observations from a case study of intelligent systems are reported as part of a multi-year interdisciplinary effort to provide guidance and assistance for designers of intelligent systems and their user interfaces. A series of studies were conducted to investigate issues in designing intelligent fault management systems in aerospace applications for effective human-computer interaction. The results of the initial study are documented in two NASA technical memoranda: TM 104738 Making Intelligent Systems Team Players: Case Studies and Design Issues, Volumes 1 and 2; and TM 104751, Making Intelligent Systems Team Players: Overview for Designers. The objective of this additional study was to broaden the investigation of human-computer interaction design issues beyond the focus on monitoring and fault detection in the initial study. The results of this second study are documented which is intended as a supplement to the original design guidance documents. These results should be of interest to designers of intelligent systems for use in real-time operations, and to researchers in the areas of human-computer interaction and artificial intelligence.

Guidelines for the Design and Conduct of Clinical Studies in Knee Articular Cartilage Repair

PubMed Central

Mithoefer, Kai; Saris, Daniel B.F.; Farr, Jack; Kon, Elizaveta; Zaslav, Kenneth; Cole, Brian J.; Ranstam, Jonas; Yao, Jian; Shive, Matthew; Levine, David; Dalemans, Wilfried; Brittberg, Mats

2011-01-01

Objective: To summarize current clinical research practice and develop methodological standards for objective scientific evaluation of knee cartilage repair procedures and products. Design: A comprehensive literature review was performed of high-level original studies providing information relevant for the design of clinical studies on articular cartilage repair in the knee. Analysis of cartilage repair publications and synopses of ongoing trials were used to identify important criteria for the design, reporting, and interpretation of studies in this field. Results: Current literature reflects the methodological limitations of the scientific evidence available for articular cartilage repair. However, clinical trial databases of ongoing trials document a trend suggesting improved study designs and clinical evaluation methodology. Based on the current scientific information and standards of clinical care, detailed methodological recommendations were developed for the statistical study design, patient recruitment, control group considerations, study endpoint definition, documentation of results, use of validated patient-reported outcome instruments, and inclusion and exclusion criteria for the design and conduct of scientifically sound cartilage repair study protocols. A consensus statement among the International Cartilage Repair Society (ICRS) and contributing authors experienced in clinical trial design and implementation was achieved. Conclusions: High-quality clinical research methodology is critical for the optimal evaluation of current and new cartilage repair technologies. In addition to generally applicable principles for orthopedic study design, specific criteria and considerations apply to cartilage repair studies. Systematic application of these criteria and considerations can facilitate study designs that are scientifically rigorous, ethical, practical, and appropriate for the question(s) being addressed in any given cartilage repair research project. PMID:26069574

Design principles for simulation games for learning clinical reasoning: A design-based research approach.

PubMed

Koivisto, J-M; Haavisto, E; Niemi, H; Haho, P; Nylund, S; Multisilta, J

2018-01-01

Nurses sometimes lack the competence needed for recognising deterioration in patient conditions and this is often due to poor clinical reasoning. There is a need to develop new possibilities for learning this crucial competence area. In addition, educators need to be future oriented; they need to be able to design and adopt new pedagogical innovations. The purpose of the study is to describe the development process and to generate principles for the design of nursing simulation games. A design-based research methodology is applied in this study. Iterative cycles of analysis, design, development, testing and refinement were conducted via collaboration among researchers, educators, students, and game designers. The study facilitated the generation of reusable design principles for simulation games to guide future designers when designing and developing simulation games for learning clinical reasoning. This study makes a major contribution to research on simulation game development in the field of nursing education. The results of this study provide important insights into the significance of involving nurse educators in the design and development process of educational simulation games for the purpose of nursing education. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sediment Export from Forest Road Turn-outs: A Study Design and Preliminary Results

Treesearch

Johnny M. Grace

1998-01-01

This paper reports the design and preliminary results of a study that evaluates the effects of commonly prescribed forest road runoff control treatments. A study design which utilizes runoff samplers, runoff diversion walls, sediment filter bags, and erosion stakes to evaluate sediment transport through runoff control treatments is documented. The study design will...

Making a Case for a Blended Approach: The Need for The Design-Based Case Study

ERIC Educational Resources Information Center

Deaton, Cynthia C. M.; Malloy, Jacquelynn A.

2017-01-01

Design-based case studies address research questions that involve instructional innovations within a bounded system. This blend of case study and design-based research provides a systematic approach to examining instructional innovations that are bounded by perspective, context, and time. Design-based case studies provide a framework for engaging…

Communications Style Guide. Fourth Edition

DTIC Science & Technology

2010-08-01

ethnography , phenomenological study , grounded theory study , and content analysis. You want to choose your research design based on your topic and how you...accessed 27 May 2008). 38 design or an historical research design. There are five basic types of qualitative research designs: case study ...suits the purpose of your study . Generally, while a student of MCU, you will use qualitative research

Development and evaluation of a study design typology for human research.

PubMed

Carini, Simona; Pollock, Brad H; Lehmann, Harold P; Bakken, Suzanne; Barbour, Edward M; Gabriel, Davera; Hagler, Herbert K; Harper, Caryn R; Mollah, Shamim A; Nahm, Meredith; Nguyen, Hien H; Scheuermann, Richard H; Sim, Ida

2009-11-14

A systematic classification of study designs would be useful for researchers, systematic reviewers, readers, and research administrators, among others. As part of the Human Studies Database Project, we developed the Study Design Typology to standardize the classification of study designs in human research. We then performed a multiple observer masked evaluation of active research protocols in four institutions according to a standardized protocol. Thirty-five protocols were classified by three reviewers each into one of nine high-level study designs for interventional and observational research (e.g., N-of-1, Parallel Group, Case Crossover). Rater classification agreement was moderately high for the 35 protocols (Fleiss' kappa = 0.442) and higher still for the 23 quantitative studies (Fleiss' kappa = 0.463). We conclude that our typology shows initial promise for reliably distinguishing study design types for quantitative human research.

Designing Studies That Would Address the Multilayered Nature of Health Care

PubMed Central

Pennell, Michael; Rhoda, Dale; Hade, Erinn M.; Paskett, Electra D.

2010-01-01

We review design and analytic methods available for multilevel interventions in cancer research with particular attention to study design, sample size requirements, and potential to provide statistical evidence for causal inference. The most appropriate methods will depend on the stage of development of the research and whether randomization is possible. Early on, fractional factorial designs may be used to screen intervention components, particularly when randomization of individuals is possible. Quasi-experimental designs, including time-series and multiple baseline designs, can be useful once the intervention is designed because they require few sites and can provide the preliminary evidence to plan efficacy studies. In efficacy and effectiveness studies, group-randomized trials are preferred when randomization is possible and regression discontinuity designs are preferred otherwise if assignment based on a quantitative score is possible. Quasi-experimental designs may be used, especially when combined with recent developments in analytic methods to reduce bias in effect estimates. PMID:20386057

A Cross-Sectional Analysis of Publication Types in Quality Improvement Journals.

PubMed

Wong, Christopher J; White, Andrew A; Merel, Susan E; Brock, Douglas M; Staiger, Thomas O

2016-07-01

Despite widespread engagement in quality improvement activities, little is known about the designs of studies currently published in quality improvement journals. This study's goal is to establish the prevalence of the types of research conducted in articles published in journals dedicated to quality improvement. A cross-sectional analysis was performed of 145 research articles published in 11 quality improvement journals in 2011. The majority of study designs were considered pre-experimental (95%), with a small percentage of quasi-experimental and experimental designs. Of the studies that reported the results of an intervention (n = 60), the most common research designs were pre-post studies (33%) and case studies (25%). There were few randomized controlled trials or quasi-experimental study designs (12% of intervention studies). These results suggest that there are opportunities for increased use of quasi-experimental study designs. © The Author(s) 2015.

Recommendations for research design of telehealth studies.

PubMed

Chumbler, Neale R; Kobb, Rita; Brennan, David M; Rabinowitz, Terry

2008-11-01

Properly designed randomized controlled trials (RCTs) are the gold standard to use when examining the effectiveness of telehealth interventions on clinical outcomes. Some published telehealth studies have employed well-designed RCTs. However, such methods are not always feasible and practical in particular settings. This white paper addresses not only the need for properly designed RCTs, but also offers alternative research designs, such as quasi-experimental designs, and statistical techniques that can be employed to rigorously assess the effectiveness of telehealth studies. This paper further offers design and measurement recommendations aimed at and relevant to administrative decision-makers, policymakers, and practicing clinicians.

Simulation methods to estimate design power: an overview for applied research.

PubMed

Arnold, Benjamin F; Hogan, Daniel R; Colford, John M; Hubbard, Alan E

2011-06-20

Estimating the required sample size and statistical power for a study is an integral part of study design. For standard designs, power equations provide an efficient solution to the problem, but they are unavailable for many complex study designs that arise in practice. For such complex study designs, computer simulation is a useful alternative for estimating study power. Although this approach is well known among statisticians, in our experience many epidemiologists and social scientists are unfamiliar with the technique. This article aims to address this knowledge gap. We review an approach to estimate study power for individual- or cluster-randomized designs using computer simulation. This flexible approach arises naturally from the model used to derive conventional power equations, but extends those methods to accommodate arbitrarily complex designs. The method is universally applicable to a broad range of designs and outcomes, and we present the material in a way that is approachable for quantitative, applied researchers. We illustrate the method using two examples (one simple, one complex) based on sanitation and nutritional interventions to improve child growth. We first show how simulation reproduces conventional power estimates for simple randomized designs over a broad range of sample scenarios to familiarize the reader with the approach. We then demonstrate how to extend the simulation approach to more complex designs. Finally, we discuss extensions to the examples in the article, and provide computer code to efficiently run the example simulations in both R and Stata. Simulation methods offer a flexible option to estimate statistical power for standard and non-traditional study designs and parameters of interest. The approach we have described is universally applicable for evaluating study designs used in epidemiologic and social science research.

Simulation methods to estimate design power: an overview for applied research

PubMed Central

2011-01-01

Background Estimating the required sample size and statistical power for a study is an integral part of study design. For standard designs, power equations provide an efficient solution to the problem, but they are unavailable for many complex study designs that arise in practice. For such complex study designs, computer simulation is a useful alternative for estimating study power. Although this approach is well known among statisticians, in our experience many epidemiologists and social scientists are unfamiliar with the technique. This article aims to address this knowledge gap. Methods We review an approach to estimate study power for individual- or cluster-randomized designs using computer simulation. This flexible approach arises naturally from the model used to derive conventional power equations, but extends those methods to accommodate arbitrarily complex designs. The method is universally applicable to a broad range of designs and outcomes, and we present the material in a way that is approachable for quantitative, applied researchers. We illustrate the method using two examples (one simple, one complex) based on sanitation and nutritional interventions to improve child growth. Results We first show how simulation reproduces conventional power estimates for simple randomized designs over a broad range of sample scenarios to familiarize the reader with the approach. We then demonstrate how to extend the simulation approach to more complex designs. Finally, we discuss extensions to the examples in the article, and provide computer code to efficiently run the example simulations in both R and Stata. Conclusions Simulation methods offer a flexible option to estimate statistical power for standard and non-traditional study designs and parameters of interest. The approach we have described is universally applicable for evaluating study designs used in epidemiologic and social science research. PMID:21689447

A study of multiplex data bus techniques for the space shuttle

NASA Technical Reports Server (NTRS)

Kearney, R. J.; Kalange, M. A.

1972-01-01

A comprehensive technology base for the design of a multiplexed data bus subsystem is provided. Extensive analyses, both analytical and empirical, were performed. Subjects covered are classified under the following headings: requirements identification and analysis; transmission media studies; signal design and detection studies; synchronization, timing, and control studies; user-subsystem interface studies; operational reliability analyses; design of candidate data bus configurations; and evaluation of candidate data bus designs.

Bioterror Preparedness-Educational Programming for Military, Public Health and Civilian Medical Personnel

DTIC Science & Technology

2006-10-01

agents. Page 5 of 42 BODY Research Study Design & Survey Development: Study Design We designed a prospective quantitative study looking at the...to bioterrorism to different groups of healthcare learners as follows: This research study design was developed in collaboration with the...PDA based format, and printed monograph based format. The research will focus on the effectiveness of distance learning and self-study methodologies

Marginal biotin deficiency can be induced experimentally in humans using a cost-effective outpatient design.

PubMed

Stratton, Shawna L; Henrich, Cindy L; Matthews, Nell I; Bogusiewicz, Anna; Dawson, Amanda M; Horvath, Thomas D; Owen, Suzanne N; Boysen, Gunnar; Moran, Jeffery H; Mock, Donald M

2012-01-01

To date, marginal, asymptomatic biotin deficiency has been successfully induced experimentally by the use of labor-intensive inpatient designs requiring rigorous dietary control. We sought to determine if marginal biotin deficiency could be induced in humans in a less expensive outpatient design incorporating a self-selected, mixed general diet. We sought to examine the efficacy of three outpatient study designs: two based on oral avidin dosing and one based on a diet high in undenatured egg white for a period of 28 d. In study design 1, participants (n = 4; 3 women) received avidin in capsules with a biotin binding capacity of 7 times the estimated dietary biotin intake of a typical self-selected diet. In study design 2, participants (n = 2; 2 women) received double the amount of avidin capsules (14 times the estimated dietary biotin intake). In study design 3, participants (n = 5; 3 women) consumed egg-white beverages containing avidin with a biotin binding capacity of 7 times the estimated dietary biotin intake. Established indices of biotin status [lymphocyte propionyl-CoA carboxylase activity; urinary excretion of 3-hydroxyisovaleric acid, 3-hydroxyisovaleryl carnitine (3HIA-carnitine), and biotin; and plasma concentration of 3HIA-carnitine] indicated that study designs 1 and 2 were not effective in inducing marginal biotin deficiency, but study design 3 was as effective as previous inpatient study designs that induced deficiency by egg-white beverage. Marginal biotin deficiency can be induced experimentally by using a cost-effective outpatient design by avidin delivery in egg-white beverages. This design should be useful to the broader nutritional research community.

Conceptual design studies of 1985 commercial VTOL transports that utilized rotors, Volume 2

NASA Technical Reports Server (NTRS)

Magee, J. P.; Clark, R.; Alexander, H. R.

1974-01-01

Results of conceptual design studies of tilt rotor and tandem helicopter aircraft for a 200 nautical mile commercial short haul transport mission are presented. The trade study data used in selecting the design point aircraft and technology details necessary to support the design conclusions are included.

76 FR 338 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... feasibility of a promising practices study of Upward Bound that uses a rigorous quasi-experimental design. The design and feasibility report will develop a set of design options for conducting a study of Upward Bound and examine their applicability to studies of other TRIO programs. If a rigorous evaluation design...

The Perception on Fundamentals of Online Courses: A Case on Prospective Instructional Designers

ERIC Educational Resources Information Center

Genç, Zülfü; Tinmaz, Hasan

2016-01-01

This study focuses on prospective instructional designers' perception toward creating online courses including which elements are essential for developing such platforms. The study is significant for revealing what the prospective instructional designers focus on while they design certain learning opportunities. The participants of the study were…

78 FR 66941 - Design Considerations for Pivotal Clinical Investigations for Medical Devices; Guidance for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... assessment. In some cases, a PMA may include multiple studies designed to answer different scientific... designing clinical studies intended to support premarket submissions for medical devices and for FDA staff who review those submissions. This guidance document describes different study design principles...

Multidisciplinary design optimization using genetic algorithms

NASA Technical Reports Server (NTRS)

Unal, Resit

1994-01-01

Multidisciplinary design optimization (MDO) is an important step in the conceptual design and evaluation of launch vehicles since it can have a significant impact on performance and life cycle cost. The objective is to search the system design space to determine values of design variables that optimize the performance characteristic subject to system constraints. Gradient-based optimization routines have been used extensively for aerospace design optimization. However, one limitation of gradient based optimizers is their need for gradient information. Therefore, design problems which include discrete variables can not be studied. Such problems are common in launch vehicle design. For example, the number of engines and material choices must be integer values or assume only a few discrete values. In this study, genetic algorithms are investigated as an approach to MDO problems involving discrete variables and discontinuous domains. Optimization by genetic algorithms (GA) uses a search procedure which is fundamentally different from those gradient based methods. Genetic algorithms seek to find good solutions in an efficient and timely manner rather than finding the best solution. GA are designed to mimic evolutionary selection. A population of candidate designs is evaluated at each iteration, and each individual's probability of reproduction (existence in the next generation) depends on its fitness value (related to the value of the objective function). Progress toward the optimum is achieved by the crossover and mutation operations. GA is attractive since it uses only objective function values in the search process, so gradient calculations are avoided. Hence, GA are able to deal with discrete variables. Studies report success in the use of GA for aircraft design optimization studies, trajectory analysis, space structure design and control systems design. In these studies reliable convergence was achieved, but the number of function evaluations was large compared with efficient gradient methods. Applicaiton of GA is underway for a cost optimization study for a launch-vehicle fuel-tank and structural design of a wing. The strengths and limitations of GA for launch vehicle design optimization is studied.

WeSaySo Case Study: Designing and Implementing a Case Study for Use in an Instructional Design Class.

ERIC Educational Resources Information Center

Graves, Rick; Barnett, Mardee; Gamble, Yolanda; Kolak, Mike

A case study was used in an instructional design class to facilitate the transfer of conceptual knowledge to concrete concerns and to aid instructional technology graduate students' understanding of the steps involved in designing, analyzing, and implementing an effective needs analysis. The case study involved real events at fictitious company…

The application of mixed methods designs to trauma research.

PubMed

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 2: The design process

NASA Technical Reports Server (NTRS)

Gillette, W. B.; Turner, M. J.; Southall, J. W.; Whitener, P. C.; Kowalik, J. S.

1973-01-01

The extent to which IPAD is to support the design process is identified. Case studies of representative aerospace products were developed as models to characterize the design process and to provide design requirements for the IPAD computing system.

Design of a Blended Learning Environment: Considerations and Implementation Issues

ERIC Educational Resources Information Center

Gedik, Nuray; Kiraz, Ercan; Ozden, M. Yasar

2013-01-01

This study identified critical issues in the design of a blended learning environment by examining basic design considerations and implementation issues. Following a design-based research approach with the phenomenological tradition of qualitative research, the study investigated instructor experiences relating to the design, development, and…

Study of the Army Helicopter Design Hover Criterion Using Temperature and Pressure Altitude

DTIC Science & Technology

2017-09-01

the Advanced Scout Helicopter Special Study Group reexamined the design point requirement. They recommended increasing the design point pressure...other combinations group between these two extremes. Ultimately, the design point for a helicopter has to be determined by the user of the...helicopter designs . 6. References Aviation Agency. 1972. “Heavy Lift Helicopter (HLH) Concept Formulation Study (U)”, Action Control Number 2958

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship-Quasi-Experimental Designs.

PubMed

Schweizer, Marin L; Braun, Barbara I; Milstone, Aaron M

2016-10-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt, nonrandomized interventions. Quasi-experimental studies can be categorized into 3 major types: interrupted time-series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship, including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. Infect Control Hosp Epidemiol 2016;1-6.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship – Quasi-Experimental Designs

PubMed Central

Schweizer, Marin L.; Braun, Barbara I.; Milstone, Aaron M.

2016-01-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt non-randomized interventions. Quasi-experimental studies can be categorized into three major types: interrupted time series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. PMID:27267457

Design Characteristics Influence Performance of Clinical Prediction Rules in Validation: A Meta-Epidemiological Study

PubMed Central

Ban, Jong-Wook; Emparanza, José Ignacio; Urreta, Iratxe; Burls, Amanda

2016-01-01

Background Many new clinical prediction rules are derived and validated. But the design and reporting quality of clinical prediction research has been less than optimal. We aimed to assess whether design characteristics of validation studies were associated with the overestimation of clinical prediction rules’ performance. We also aimed to evaluate whether validation studies clearly reported important methodological characteristics. Methods Electronic databases were searched for systematic reviews of clinical prediction rule studies published between 2006 and 2010. Data were extracted from the eligible validation studies included in the systematic reviews. A meta-analytic meta-epidemiological approach was used to assess the influence of design characteristics on predictive performance. From each validation study, it was assessed whether 7 design and 7 reporting characteristics were properly described. Results A total of 287 validation studies of clinical prediction rule were collected from 15 systematic reviews (31 meta-analyses). Validation studies using case-control design produced a summary diagnostic odds ratio (DOR) 2.2 times (95% CI: 1.2–4.3) larger than validation studies using cohort design and unclear design. When differential verification was used, the summary DOR was overestimated by twofold (95% CI: 1.2 -3.1) compared to complete, partial and unclear verification. The summary RDOR of validation studies with inadequate sample size was 1.9 (95% CI: 1.2 -3.1) compared to studies with adequate sample size. Study site, reliability, and clinical prediction rule was adequately described in 10.1%, 9.4%, and 7.0% of validation studies respectively. Conclusion Validation studies with design shortcomings may overestimate the performance of clinical prediction rules. The quality of reporting among studies validating clinical prediction rules needs to be improved. PMID:26730980

Design Characteristics Influence Performance of Clinical Prediction Rules in Validation: A Meta-Epidemiological Study.

PubMed

Ban, Jong-Wook; Emparanza, José Ignacio; Urreta, Iratxe; Burls, Amanda

2016-01-01

Many new clinical prediction rules are derived and validated. But the design and reporting quality of clinical prediction research has been less than optimal. We aimed to assess whether design characteristics of validation studies were associated with the overestimation of clinical prediction rules' performance. We also aimed to evaluate whether validation studies clearly reported important methodological characteristics. Electronic databases were searched for systematic reviews of clinical prediction rule studies published between 2006 and 2010. Data were extracted from the eligible validation studies included in the systematic reviews. A meta-analytic meta-epidemiological approach was used to assess the influence of design characteristics on predictive performance. From each validation study, it was assessed whether 7 design and 7 reporting characteristics were properly described. A total of 287 validation studies of clinical prediction rule were collected from 15 systematic reviews (31 meta-analyses). Validation studies using case-control design produced a summary diagnostic odds ratio (DOR) 2.2 times (95% CI: 1.2-4.3) larger than validation studies using cohort design and unclear design. When differential verification was used, the summary DOR was overestimated by twofold (95% CI: 1.2 -3.1) compared to complete, partial and unclear verification. The summary RDOR of validation studies with inadequate sample size was 1.9 (95% CI: 1.2 -3.1) compared to studies with adequate sample size. Study site, reliability, and clinical prediction rule was adequately described in 10.1%, 9.4%, and 7.0% of validation studies respectively. Validation studies with design shortcomings may overestimate the performance of clinical prediction rules. The quality of reporting among studies validating clinical prediction rules needs to be improved.

What Does It Take to Be a Successful Graphic Designer: A Phenomenological Study on Graphic Design Curriculum

ERIC Educational Resources Information Center

Beller, Shannon

2017-01-01

This study examined the phenomenon of what it takes to be a successful graphic designer. With an identity crisis in graphic design education, design curriculum is faced with uncertainties. With the diversity of programs and degrees in graphic design, the competencies and skills developed among the various programs reflect different purposes, thus…

Correlation of shear design between AASHTO LRFD bridge design specifications and AASHTO Guide Specifications for the LRFD Seismic Bridge Design.

DOT National Transportation Integrated Search

2017-01-05

This report presents the analytical study of the shear capacity of reinforced concrete columns using both the AASHTO LRFD Bridge Design Specifications and the AASHTO Guide Specifications for the LRFD Seismic Bridge Design. The study investigates vari...

Problem Solving Techniques for the Design of Algorithms.

ERIC Educational Resources Information Center

Kant, Elaine; Newell, Allen

1984-01-01

Presents model of algorithm design (activity in software development) based on analysis of protocols of two subjects designing three convex hull algorithms. Automation methods, methods for studying algorithm design, role of discovery in problem solving, and comparison of different designs of case study according to model are highlighted.…

Screening for fragile X syndrome.

PubMed

Murray, J; Cuckle, H; Taylor, G; Hewison, J

1997-01-01

BACKGROUND AND AIM OF REVIEW. In 1991, the gene responsible for fragile X syndrome, a common cause of learning disability, was discovered. As a result, diagnosis of the disorder has improved and its molecular genetics are now understood. This report seems to provide the information needed to decide whether to use DNA testing to screen for the disorder. HOW THE RESEARCH WAS CONDUCTED. A literature search of electronic reference databases of published and 'grey' literature was undertaken together with hand searching of the most recent publications. RESEARCH FINDINGS. NATURAL HISTORY. Physical characteristics of fragile X syndrome include facial atypia, joint laxity and, in boys, macro-orchidism. Most affected males have moderate-to-severe learning disabilities with IQs under 50 whereas most females have borderline IQs of 70-85. Behavioural problems are similar to those seen with autism and attention-deficit disorders. Although fragile X syndrome is not curable there are a number of medical, educational, psychological and social interventions that can improve the symptoms. About 6% of those with learning disabilities tested in institutions have fragile X syndrome. Population prevalence figures are 1 in 4000 in males and 1 in 8000 in females. GENETICS. The disorder is caused by a mutation in a gene on the X chromosome which includes a trinucleotide repeat sequence. The mutation is characterized by hyper-expansion of the repeat sequence leading to down-regulation of the gene. In males an allele with repeat size in excess of 200, termed a full mutation (FM), is always associated with the affected phenotype, whereas in females only half are affected. Individuals with alleles having repeat size in the range 55-199 are unaffected but in females the sequence is heritably unstable so that it is at high risk of expansion to an FM in her offspring. This allele is known as a pre-mutation (PM) to contrast it with the FM found in the affected individual. No spontaneous expansions directly from a normal allele to an FM have been observed. SCREENING STRATEGIES. The principal aims of screenng for fragile X syndrome is to reduce the birth prevalence of the disorder, by prenatal diagnosis and selective termination of pregnancy, or by reducing the number of pregnancies in women who have the FM or PM alleles. Possible screening strategies are: routine antenatal testing of apparently low risk pregnancies, preconceptual testing of young women, and systematic testing in affected families ('cascade' screening). A secondary aim is to bring forward the diagnosis of affected individuals so that they might benefit from early treatment. Active paediatric screening and neonatal screening could achieve this but there is no direct evidence of any great benefit from early diagnosis. SCREENING TESTS. Cytogenetic methods are unsuitable for screening purposes. Southern blotting of genomic DNA can be used but is inaccurate in measuring the size of small PMs, there is a long laboratory turnaround time, and it is relatively expensive. The best protocol is to amplify the DNA using polymerase chain reaction on all samples, and when there is a possible failure to amplify, a Southern blot.(ABSTRACT TRUNCATED)

Design and analysis of multiple diseases genome-wide association studies without controls.

PubMed

Chen, Zhongxue; Huang, Hanwen; Ng, Hon Keung Tony

2012-11-15

In genome-wide association studies (GWAS), multiple diseases with shared controls is one of the case-control study designs. If data obtained from these studies are appropriately analyzed, this design can have several advantages such as improving statistical power in detecting associations and reducing the time and cost in the data collection process. In this paper, we propose a study design for GWAS which involves multiple diseases but without controls. We also propose corresponding statistical data analysis strategy for GWAS with multiple diseases but no controls. Through a simulation study, we show that the statistical association test with the proposed study design is more powerful than the test with single disease sharing common controls, and it has comparable power to the overall test based on the whole dataset including the controls. We also apply the proposed method to a real GWAS dataset to illustrate the methodologies and the advantages of the proposed design. Some possible limitations of this study design and testing method and their solutions are also discussed. Our findings indicate that the proposed study design and statistical analysis strategy could be more efficient than the usual case-control GWAS as well as those with shared controls. Copyright © 2012 Elsevier B.V. All rights reserved.

Magic Mirror, On the Wall-Which Is the Right Study Design of Them All?-Part II.

PubMed

Vetter, Thomas R

2017-07-01

The assessment of a new or existing treatment or other intervention typically answers 1 of 3 central research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); or (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that, on a situational basis, are appropriate to apply in conducting research. These study designs are generally classified as experimental, quasiexperimental, or observational, with observational studies being further divided into descriptive and analytic categories. This second of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of observational study designs. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

Magic Mirror, on the Wall-Which Is the Right Study Design of Them All?-Part I.

PubMed

Vetter, Thomas R

2017-06-01

The assessment of a new or existing treatment or intervention typically answers 1 of 3 research-related questions: (1) "Can it work?" (efficacy); (2) "Does it work?" (effectiveness); and (3) "Is it worth it?" (efficiency or cost-effectiveness). There are a number of study designs that on a situational basis are appropriate to apply in conducting research. These study designs are classified as experimental, quasi-experimental, or observational, with observational studies being further divided into descriptive and analytic categories. This first of a 2-part statistical tutorial reviews these 3 salient research questions and describes a subset of the most common types of experimental and quasi-experimental study design. Attention is focused on the strengths and weaknesses of each study design to assist in choosing which is appropriate for a given study objective and hypothesis as well as the particular study setting and available resources and data. Specific studies and papers are highlighted as examples of a well-chosen, clearly stated, and properly executed study design type.

Waiting list randomized controlled trial within a case-finding design: methodological considerations.

PubMed

Ronaldson, Sarah; Adamson, Joy; Dyson, Lisa; Torgerson, David

2014-10-01

Randomized controlled trials (RCTs) are widely used in health care research to provide high-quality evidence of effectiveness of an intervention. However, sometimes a study does not require an RCT in order to answer its primary objective; a case-finding design may be more appropriate. The aim of this paper was to introduce a new study design that nests a waiting list RCT within a case-finding study. An example of the new study design is the DOC Study, which primarily aims to determine the diagnostic accuracy of lung function tests for chronic obstructive pulmonary disease. It also investigates the impact of lung function tests on smoking behaviour through use of a waiting list design. The first step of the study design is to obtain participants' consent. Individuals are then randomized to one of two groups; either the 'intervention now' group or the 'intervention later' group, that is, participants are placed on a waiting list. All participants receive the same intervention; the only difference between the groups is the timing of the intervention. The design addresses patient preference issues and recruitment issues that can arise in other trial designs. Potential limitations include differential attrition between study groups and potential demoralization for the 'intervention later' group. The 'waiting list case-finding trial' design is a valuable method that could be applied to case-finding studies; the design enables the case-finding component of a study to be maintained while simultaneously exploring additional hypotheses through conducting a trial. © 2014 John Wiley & Sons, Ltd.

Academic Primer Series: Five Key Papers about Study Designs in Medical Education.

PubMed

Gottlieb, Michael; Chan, Teresa M; Fredette, Jenna; Messman, Anne; Robinson, Daniel W; Cooney, Robert; Boysen-Osborn, Megan; Sherbino, Jonathan

2017-06-01

A proper understanding of study design is essential to creating successful studies. This is also important when reading or peer reviewing publications. In this article, we aimed to identify and summarize key papers that would be helpful for faculty members interested in learning more about study design in medical education research. The online discussions of the 2016-2017 Academic Life in Emergency Medicine Faculty Incubator program included a robust and vigorous discussion about education study design, which highlighted a number of papers on that topic. We augmented this list of papers with further suggestions by expert mentors. Via this process, we created a list of 29 papers in total on the topic of medical education study design. After gathering these papers, our authorship group engaged in a modified Delphi approach to build consensus on the papers that were most valuable for the understanding of proper study design in medical education. We selected the top five most highly rated papers on the topic domain of study design as determined by our study group. We subsequently summarized these papers with respect to their relevance to junior faculty members and to faculty developers. This article summarizes five key papers addressing study design in medical education with discussions and applications for junior faculty members and faculty developers. These papers provide a basis upon which junior faculty members might build for developing and analyzing studies.

The Metamorphosis of Industrial Designers from Novices to Experts

ERIC Educational Resources Information Center

Wong, Ju-Joan; Chen, Po-Yu; Chen, Chun-Di

2016-01-01

Professional training for designers is crucial in the field of design studies. The characteristics of novices versus those of expert designers have been identified in the literature; however, studies exploring the issue of professional training processes in the actual workplace are not well developed. Our study addresses the topic by using…

What are you trying to learn? Study designs and the appropriate analysis for your research question

USDA-ARS?s Scientific Manuscript database

One fundamental necessity in the entire process of a well-performed study is the experimental design. A well-designed study can help researchers understand and have confidence in their results and analyses, and additionally the agreement or disagreement with the stated hypothesis. This well-designed...

Design research and the globalization of healthcare environments.

PubMed

Shepley, Mardelle McCuskey; Song, Yilin

2014-01-01

Global healthcare practice has expanded in the past 20 years. At the same time the incorporation of research into the design process has gained prominence as a best practice among architects. The authors of this study investigated the status of design research in a variety of international settings. We intended to answer the question, "how pervasive is healthcare design research outside of the United States?" The authors reviewed the international literature on the design of healthcare facilities. More than 500 international studies and conference proceedings were incorporated in this literature review. A team of five research assistants searched multiple databases comparing approximately 16 keywords to geographic location. Some of those keywords included: evidence-based design, salutogenic design, design research, and healthcare environment. Additional articles were gathered by contacting prominent researchers and asking for their personal assessment of local health design research studies. While there are design researchers in most parts of the world, the majority of studies focus on the needs of populations in developed countries and generate guidelines that have significant cost and cultural implications that prohibit their implementation in developing countries. Additionally, the body of literature discussing the role of culture in healthcare environments is extremely limited. Design researchers must address the cultural implications of their studies. Additionally, we need to expand our research objectives to address healthcare design in countries that have not been previous considered. © 2014 Vendome Group, LLC.

Design, Development and Analysis of Centrifugal Blower

NASA Astrophysics Data System (ADS)

Baloni, Beena Devendra; Channiwala, Salim Abbasbhai; Harsha, Sugnanam Naga Ramannath

2018-06-01

Centrifugal blowers are widely used turbomachines equipment in all kinds of modern and domestic life. Manufacturing of blowers seldom follow an optimum design solution for individual blower. Although centrifugal blowers are developed as highly efficient machines, design is still based on various empirical and semi empirical rules proposed by fan designers. There are different methodologies used to design the impeller and other components of blowers. The objective of present study is to study explicit design methodologies and tracing unified design to get better design point performance. This unified design methodology is based more on fundamental concepts and minimum assumptions. Parametric study is also carried out for the effect of design parameters on pressure ratio and their interdependency in the design. The code is developed based on a unified design using C programming. Numerical analysis is carried out to check the flow parameters inside the blower. Two blowers, one based on the present design and other on industrial design, are developed with a standard OEM blower manufacturing unit. A comparison of both designs is done based on experimental performance analysis as per IS standard. The results suggest better efficiency and more flow rate for the same pressure head in case of the present design compared with industrial one.

The Role of Re-Appropriation in Open Design: A Case Study on How Openness in Higher Education for Industrial Design Engineering Can Trigger Global Discussions on the Theme of Urban Gardening

ERIC Educational Resources Information Center

Ostuzzi, Francesca; Conradie, Peter; De Couvreur, Lieven; Detand, Jan; Saldien, Jelle

2016-01-01

This case study explores the opportunities for students of Industrial Design Engineering to engage with direct and indirect stakeholders by making their design process and results into open-ended designed solutions. The reported case study involved 47 students during a two-weeks intensive course on the topic of urban gardening. Observations were…

Evaluation of agile designs in first-in-human (FIH) trials--a simulation study.

PubMed

Perlstein, Itay; Bolognese, James A; Krishna, Rajesh; Wagner, John A

2009-12-01

The aim of the investigation was to evaluate alternatives to standard first-in-human (FIH) designs in order to optimize the information gained from such studies by employing novel agile trial designs. Agile designs combine adaptive and flexible elements to enable optimized use of prior information either before and/or during conduct of the study to seamlessly update the study design. A comparison of the traditional 6 + 2 (active + placebo) subjects per cohort design with alternative, reduced sample size, agile designs was performed by using discrete event simulation. Agile designs were evaluated for specific adverse event models and rates as well as dose-proportional, saturated, and steep-accumulation pharmacokinetic profiles. Alternative, reduced sample size (hereafter referred to as agile) designs are proposed for cases where prior knowledge about pharmacokinetics and/or adverse event relationships are available or appropriately assumed. Additionally, preferred alternatives are proposed for a general case when prior knowledge is limited or unavailable. Within the tested conditions and stated assumptions, some agile designs were found to be as efficient as traditional designs. Thus, simulations demonstrated that the agile design is a robust and feasible approach to FIH clinical trials, with no meaningful loss of relevant information, as it relates to PK and AE assumptions. In some circumstances, applying agile designs may decrease the duration and resources required for Phase I studies, increasing the efficiency of early clinical development. We highlight the value and importance of useful prior information when specifying key assumptions related to safety, tolerability, and PK.

Relation between experimental and non-experimental study designs. HB vaccines: a case study

PubMed Central

Jefferson, T.; Demicheli, V.

1999-01-01

STUDY OBJECTIVE: To examine the relation between experimental and non- experimental study design in vaccinology. DESIGN: Assessment of each study design's capability of testing four aspects of vaccine performance, namely immunogenicity (the capacity to stimulate the immune system), duration of immunity conferred, incidence and seriousness of side effects, and number of infections prevented by vaccination. SETTING: Experimental and non-experimental studies on hepatitis B (HB) vaccines in the Cochrane Vaccines Field Database. RESULTS: Experimental and non-experimental vaccine study designs are frequently complementary but some aspects of vaccine quality can only be assessed by one of the types of study. More work needs to be done on the relation between study quality and its significance in terms of effect size.   PMID:10326054

A Critical Review on Tubercles Design for Propellers

NASA Astrophysics Data System (ADS)

Seeni, A.; Rajendran, P.; Kutty, H. A.

2018-05-01

The design of propellers in aeronautics is still earning high interest. This has led to the application of biomimetic for improving aerodynamic performance. One such design is the usage of tubercles in either leading or trailing edge of airfoils. So the usage of tubercles has so far been in the design of wing or wind-turbines. Recent studies have aimed to study tubercles for the design of a propeller. The studies have so far gained reputations in improving the aerodynamic performance on a few but not all of the airfoil shapes. Similar results have been identified for propeller designs with improvement in thrust at low torque. We have so far led research works on developing new propeller designs with the aim to improve the thrust and torque performance of propeller. A review of recent studies has been performed to study the state-of-the-art. The results of this work will be discussed in this paper.

A Bayesian multi-stage cost-effectiveness design for animal studies in stroke research

PubMed Central

Cai, Chunyan; Ning, Jing; Huang, Xuelin

2017-01-01

Much progress has been made in the area of adaptive designs for clinical trials. However, little has been done regarding adaptive designs to identify optimal treatment strategies in animal studies. Motivated by an animal study of a novel strategy for treating strokes, we propose a Bayesian multi-stage cost-effectiveness design to simultaneously identify the optimal dose and determine the therapeutic treatment window for administrating the experimental agent. We consider a non-monotonic pattern for the dose-schedule-efficacy relationship and develop an adaptive shrinkage algorithm to assign more cohorts to admissible strategies. We conduct simulation studies to evaluate the performance of the proposed design by comparing it with two standard designs. These simulation studies show that the proposed design yields a significantly higher probability of selecting the optimal strategy, while it is generally more efficient and practical in terms of resource usage. PMID:27405325

Aeroelastic Optimization Study Based on X-56A Model

NASA Technical Reports Server (NTRS)

Li, Wesley; Pak, Chan-Gi

2014-01-01

A design process which incorporates the object-oriented multidisciplinary design, analysis, and optimization (MDAO) tool and the aeroelastic effects of high fidelity finite element models to characterize the design space was successfully developed and established. Two multidisciplinary design optimization studies using an object-oriented MDAO tool developed at NASA Armstrong Flight Research Center were presented. The first study demonstrates the use of aeroelastic tailoring concepts to minimize the structural weight while meeting the design requirements including strength, buckling, and flutter. A hybrid and discretization optimization approach was implemented to improve accuracy and computational efficiency of a global optimization algorithm. The second study presents a flutter mass balancing optimization study. The results provide guidance to modify the fabricated flexible wing design and move the design flutter speeds back into the flight envelope so that the original objective of X-56A flight test can be accomplished.

Usability engineering for augmented reality: employing user-based studies to inform design.

PubMed

Gabbard, Joseph L; Swan, J Edward

2008-01-01

A major challenge, and thus opportunity, in the field of human-computer interaction and specifically usability engineering is designing effective user interfaces for emerging technologies that have no established design guidelines or interaction metaphors or introduce completely new ways for users to perceive and interact with technology and the world around them. Clearly, augmented reality is one such emerging technology. We propose a usability engineering approach that employs user-based studies to inform design, by iteratively inserting a series of user-based studies into a traditional usability engineering lifecycle to better inform initial user interface designs. We present an exemplar user-based study conducted to gain insight into how users perceive text in outdoor augmented reality settings and to derive implications for design in outdoor augmented reality. We also describe lessons learned from our experiences conducting user-based studies as part of the design process.

HYFIRE II: fusion/high-temperature electrolysis conceptual-design study. Annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fillo, J.A.

1983-08-01

As in the previous HYFIRE design study, the current study focuses on coupling a Tokamak fusion reactor with a high-temperature blanket to a High-Temperature Electrolyzer (HTE) process to produce hydrogen and oxygen. Scaling of the STARFIRE reactor to allow a blanket power to 6000 MW(th) is also assumed. The primary difference between the two studies is the maximum inlet steam temperature to the electrolyzer. This temperature is decreased from approx. 1300/sup 0/ to approx. 1150/sup 0/C, which is closer to the maximum projected temperature of the Westinghouse fuel cell design. The process flow conditions change but the basic design philosophymore » and approaches to process design remain the same as before. Westinghouse assisted in the study in the areas of systems design integration, plasma engineering, balance-of-plant design, and electrolyzer technology.« less

Marginal Biotin Deficiency Can Be Induced Experimentally in Humans Using a Cost-Effective Outpatient Design123

PubMed Central

Stratton, Shawna L.; Henrich, Cindy L.; Matthews, Nell I.; Bogusiewicz, Anna; Dawson, Amanda M.; Horvath, Thomas D.; Owen, Suzanne N.; Boysen, Gunnar; Moran, Jeffery H.; Mock, Donald M.

2012-01-01

To date, marginal, asymptomatic biotin deficiency has been successfully induced experimentally by the use of labor-intensive inpatient designs requiring rigorous dietary control. We sought to determine if marginal biotin deficiency could be induced in humans in a less expensive outpatient design incorporating a self-selected, mixed general diet. We sought to examine the efficacy of three outpatient study designs: two based on oral avidin dosing and one based on a diet high in undenatured egg white for a period of 28 d. In study design 1, participants (n = 4; 3 women) received avidin in capsules with a biotin binding capacity of 7 times the estimated dietary biotin intake of a typical self-selected diet. In study design 2, participants (n = 2; 2 women) received double the amount of avidin capsules (14 times the estimated dietary biotin intake). In study design 3, participants (n = 5; 3 women) consumed egg-white beverages containing avidin with a biotin binding capacity of 7 times the estimated dietary biotin intake. Established indices of biotin status [lymphocyte propionyl-CoA carboxylase activity; urinary excretion of 3-hydroxyisovaleric acid, 3-hydroxyisovaleryl carnitine (3HIA-carnitine), and biotin; and plasma concentration of 3HIA-carnitine] indicated that study designs 1 and 2 were not effective in inducing marginal biotin deficiency, but study design 3 was as effective as previous inpatient study designs that induced deficiency by egg-white beverage. Marginal biotin deficiency can be induced experimentally by using a cost-effective outpatient design by avidin delivery in egg-white beverages. This design should be useful to the broader nutritional research community. PMID:22157538

The Design of Lightning Protection

NASA Technical Reports Server (NTRS)

1983-01-01

Engineering study guides design and monitoring of lightning protection. Design studies for project are collected in 150-page report, containing wealth of information on design of lightning protection systems and on instrumentation for monitoring current waveforms of lightning strokes.

Techniques for Conducting Effective Concept Design and Design-to-Cost Trade Studies

NASA Technical Reports Server (NTRS)

Di Pietro, David A.

2015-01-01

Concept design plays a central role in project success as its product effectively locks the majority of system life cycle cost. Such extraordinary leverage presents a business case for conducting concept design in a credible fashion, particularly for first-of-a-kind systems that advance the state of the art and that have high design uncertainty. A key challenge, however, is to know when credible design convergence has been achieved in such systems. Using a space system example, this paper characterizes the level of convergence needed for concept design in the context of technical and programmatic resource margins available in preliminary design and highlights the importance of design and cost evaluation learning curves in determining credible convergence. It also provides techniques for selecting trade study cases that promote objective concept evaluation, help reveal unknowns, and expedite convergence within the trade space and conveys general practices for conducting effective concept design-to-cost studies.

Towards an Understanding of Instructional Design Heuristics: An Exploratory Delphi Study

ERIC Educational Resources Information Center

York, Cindy S.; Ertmer, Peggy A.

2011-01-01

Evidence suggests that experienced instructional designers often use heuristics and adapted models when engaged in the instructional design problem-solving process. This study used the Delphi technique to identify a core set of heuristics designers reported as being important to the success of the design process. The overarching purpose of the…

Improving Design Understandings and Skills through Enhanced Metacognition: Reflective Design Journals

ERIC Educational Resources Information Center

Kurt, Mustafa; Kurt, Sevinc

2017-01-01

The main aim of this study was to investigate and discover whether going through the process of reflection by keeping reflective design journals (RDJ) enhances architecture students' metacognition and whether this enhanced metacognition improves their design understandings and skills. The study was a mixed-methods design and utilised content…

Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

ERIC Educational Resources Information Center

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2017-01-01

Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

Two decades (1993-2012) of adult intensive care unit design: a comparative study of the physical design features of the best practice examples.

PubMed

Rashid, Mahbub

2014-01-01

In 2006, Critical Care Nursing Quarterly published a study of the physical design features of a set of best practice example adult intensive care units (ICUs). These adult ICUs were awarded between 1993 and 2003 by the Society of Critical Care Medicine (SCCM), the American Association of Critical-Care Nurses, and the American Institute of Architects/Academy of Architecture for Health for their efforts to promote the critical care unit environment through design. Since 2003, several more adult ICUs were awarded by the same organizations for similar efforts. This study includes these newer ICUs along with those of the previous study to cover a period of 2 decades from 1993 to 2012. Like the 2006 study, this study conducts a systematic content analysis of the materials submitted by the award-winning adult ICUs. On the basis of the analysis, the study compares the 1993-2002 and 2003-2012 adult ICUs in relation to construction type, unit specialty, unit layout, unit size, patient room size and design, support and service area layout, and family space design. The study also compares its findings with the 2010 Guidelines for Design and Construction of Health Care Facilities of the Facility Guidelines Institute and the 2012 Guidelines for Intensive Care Unit Design of the SCCM. The study indicates that the award-winning ICUs of both decades used several design features that were associated with positive outcomes in research studies. The study also indicates that the award-winning ICUs of the second decade used more evidence-based design features than those of the first decades. In most cases, these ICUs exceeded the requirements of the Facility Guidelines Institute Guidelines to meet those of the SCCM Guidelines. Yet, the award-winning ICUs of both decades also used several features that had very little or no supporting research evidence. Since they all were able to create an optimal critical care environment for which they were awarded, having knowledge of the physical design of these award-winning ICUs may help design better ICUs.

Aviation Human-in-the-Loop Simulation Studies: Experimental Planning, Design, and Data Management

DTIC Science & Technology

2014-01-01

Aviation Human-in-the-Loop Simulation Studies: Experimental Planning, Design , and Data Management Kevin W. Williams1 Bonny Christopher2 Gena...Simulation Studies: Experimental Planning, Design , and Data Management January 2014 6. Performing Organization Code 7. Author(s) 8. Performing...describe the process by which we designed our human-in-the-loop (HITL) simulation study and the methodology used to collect and analyze the results

Development of deployable structures for large space platform systems. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Greenberg, H. S.

1983-01-01

The preponderance of study effort was devoted toward the deployable platform systems study which culminated in the detailed design of a ground test article for future development testing. This design is representative of a prototype square-truss, single-fold building-block design that can construct deployable platform structures. This prototype design was selected through a comprehensive and traceable selection process applied to eight competitive designs. The selection process compared the competitive designs according to seven major selection criteria, i.e., design versatility, cost, thermal stability, meteoroid impact significance, reliability, performance predictability, and orbiter integration suitability. In support of the foregoing, a materials data base, and platform systems technology development needs were established. An erectable design of an OTV hangar was selected and recommended for further design development. This design was selected from five study-developed competitive single-fold and double-fold designs including hard-shell and inflatable designs. Also, two deployable manned module configurations, i.e., a hard-shell and an inflatable design were each developed to the same requirements as the composite of two Space station baseline habitat modules.

Promoting Teacher Adoption of GIS Using Teacher-Centered and Teacher-Friendly Design

ERIC Educational Resources Information Center

Hong, Jung Eun

2014-01-01

This article reports the results of a case study that employed user-centered design to develop training tutorials for helping middle school social studies teachers use Web-based GIS in their classrooms. This study placed teachers in the center of the design process in planning, designing, and developing the tutorials. This article describes how…

User Design: A Case Study on Corporate Change

ERIC Educational Resources Information Center

Pastore, Raymond S.; Carr-Chellman, Alison A.; Lohmann, Neal

2011-01-01

The purpose of this study was to examine the effects of implementing user design strategies within the corporate culture. Using a case study design approach, this article explores the change process within a "Fortune" 100 company in which users were given significant decision-making powers. The main focus is on the unique nature of user design in…

Near Zero Energy House (NZEH) Design Optimization to Improve Life Cycle Cost Performance Using Genetic Algorithm

NASA Astrophysics Data System (ADS)

Latief, Y.; Berawi, M. A.; Koesalamwardi, A. B.; Supriadi, L. S. R.

2018-03-01

Near Zero Energy House (NZEH) is a housing building that provides energy efficiency by using renewable energy technologies and passive house design. Currently, the costs for NZEH are quite expensive due to the high costs of the equipment and materials for solar panel, insulation, fenestration and other renewable energy technology. Therefore, a study to obtain the optimum design of a NZEH is necessary. The aim of the optimum design is achieving an economical life cycle cost performance of the NZEH. One of the optimization methods that could be utilized is Genetic Algorithm. It provides the method to obtain the optimum design based on the combinations of NZEH variable designs. This paper discusses the study to identify the optimum design of a NZEH that provides an optimum life cycle cost performance using Genetic Algorithm. In this study, an experiment through extensive design simulations of a one-level house model was conducted. As a result, the study provide the optimum design from combinations of NZEH variable designs, which are building orientation, window to wall ratio, and glazing types that would maximize the energy generated by photovoltaic panel. Hence, the design would support an optimum life cycle cost performance of the house.

Evaluation of the pre-posterior distribution of optimized sampling times for the design of pharmacokinetic studies.

PubMed

Duffull, Stephen B; Graham, Gordon; Mengersen, Kerrie; Eccleston, John

2012-01-01

Information theoretic methods are often used to design studies that aim to learn about pharmacokinetic and linked pharmacokinetic-pharmacodynamic systems. These design techniques, such as D-optimality, provide the optimum experimental conditions. The performance of the optimum design will depend on the ability of the investigator to comply with the proposed study conditions. However, in clinical settings it is not possible to comply exactly with the optimum design and hence some degree of unplanned suboptimality occurs due to error in the execution of the study. In addition, due to the nonlinear relationship of the parameters of these models to the data, the designs are also locally dependent on an arbitrary choice of a nominal set of parameter values. A design that is robust to both study conditions and uncertainty in the nominal set of parameter values is likely to be of use clinically. We propose an adaptive design strategy to account for both execution error and uncertainty in the parameter values. In this study we investigate designs for a one-compartment first-order pharmacokinetic model. We do this in a Bayesian framework using Markov-chain Monte Carlo (MCMC) methods. We consider log-normal prior distributions on the parameters and investigate several prior distributions on the sampling times. An adaptive design was used to find the sampling window for the current sampling time conditional on the actual times of all previous samples.

Improved minimum cost and maximum power two stage genome-wide association study designs.

PubMed

Stanhope, Stephen A; Skol, Andrew D

2012-01-01

In a two stage genome-wide association study (2S-GWAS), a sample of cases and controls is allocated into two groups, and genetic markers are analyzed sequentially with respect to these groups. For such studies, experimental design considerations have primarily focused on minimizing study cost as a function of the allocation of cases and controls to stages, subject to a constraint on the power to detect an associated marker. However, most treatments of this problem implicitly restrict the set of feasible designs to only those that allocate the same proportions of cases and controls to each stage. In this paper, we demonstrate that removing this restriction can improve the cost advantages demonstrated by previous 2S-GWAS designs by up to 40%. Additionally, we consider designs that maximize study power with respect to a cost constraint, and show that recalculated power maximizing designs can recover a substantial amount of the planned study power that might otherwise be lost if study funding is reduced. We provide open source software for calculating cost minimizing or power maximizing 2S-GWAS designs.

The effects of design details on cost and weight of fuselage structures

NASA Technical Reports Server (NTRS)

Swanson, G. D.; Metschan, S. L.; Morris, M. R.; Kassapoglou, C.

1993-01-01

Crown panel design studies showing the relationship between panel size, cost, weight, and aircraft configuration are compared to aluminum design configurations. The effects of a stiffened sandwich design concept are also discussed. This paper summarizes the effect of a design cost model in assessing the cost and weight relationships for fuselage crown panel designs. Studies were performed using data from existing aircraft to assess the effects of different design variables on the cost and weight of transport fuselage crown panel design. Results show a strong influence of load levels, panel size, and material choices on the cost and weight of specific designs. A design tool being developed under the NASA ACT program is used in the study to assess these issues. The effects of panel configuration comparing postbuckled and buckle resistant stiffened laminated structure is compared to a stiffened sandwich concept. Results suggest some potential economy with stiffened sandwich designs for compression dominated structure with relatively high load levels.

Fusion reactor blanket/shield design study

NASA Astrophysics Data System (ADS)

Smith, D. L.; Clemmer, R. G.; Harkness, S. D.; Jung, J.; Krazinski, J. L.; Mattas, R. F.; Stevens, H. C.; Youngdahl, C. K.; Trachsel, C.; Bowers, D.

1979-07-01

A joint study of Tokamak reactor first wall/blanket/shield technology was conducted to identify key technological limitations for various tritium breeding blanket design concepts, establishment of a basis for assessment and comparison of the design features of each concept, and development of optimized blanket designs. The approach used involved a review of previously proposed blanket designs, analysis of critical technological problems and design features associated with each of the blanket concepts, and a detailed evaluation of the most tractable design concepts. Tritium breeding blanket concepts were evaluated according to the proposed coolant. The effort concentrated on evaluation of lithium and water cooled blanket designs and helium and molten salt cooled designs. Generalized nuclear analysis of the tritium breeding performance, an analysis of tritium breeding requirements, and a first wall stress analysis were conducted as part of the study. The impact of coolant selection on the mechanical design of a Tokamak reactor was evaluated. Reference blanket designs utilizing the four candidate coolants are presented.

Design of control-group conditions in clinical trials of behavioral interventions.

PubMed

Lindquist, Ruth; Wyman, Jean F; Talley, Kristine M C; Findorff, Mary J; Gross, Cynthia R

2007-01-01

To review considerations in the design of placebo (attention) control conditions for community-based clinical trials of health behavior change interventions and to provide practical strategies for the design of control conditions. A well-designed control condition is an essential component of a clinical trial to foster the unambiguous interpretation of study findings. Pitfalls in the design of control conditions in clinical trials of behavioral interventions are identified and strategies to address them are offered. Types of control conditions that have been used in fall prevention trials are described, along with their strengths and weaknesses. The control condition used in the recent fall evaluation and prevention program (FEPP) was designed to overcome limitations of previous trial designs; it is provided to illustrate how to apply specific design principles. Pitfalls in the design of behavioral intervention studies may be avoided with the application of sound design principles. The FEPP active control condition can be used as a model in the design of future studies.

Evaluating Effectiveness of a Frigate in an Anti-Air Warfare (AAW) Environment

DTIC Science & Technology

2016-06-01

missions to accomplish. Both studies are used in ship design to determine the ship’s required combat capabilities before finalizing the hull design. This...accomplish. Both studies are used in ship design to determine the ship’s required combat capabilities before finalizing the hull design. This...capabilities should be determined before the ship’s hull design is complete to make operational effectiveness independent from physical design considerations

Basic Design, a Needed Foundation for Designing a Successful Garment: A Case Study of Dressmakers in the Ho Municipality, Volta Region, Ghana

ERIC Educational Resources Information Center

Gbetodeme, Selom; Amankwa, Joana; Dzegblor, Noble Komla

2016-01-01

To facilitate the design process in every art form, there are certain guidelines that all professional designers should use. These are known as elements and principles of design. This study is a survey carried out to assess the knowledge of dressmakers about basic design in the Ho Municipality of Ghana. Sixty dressmakers were randomly sampled for…

Conceptual engineering design studies of 1985-era commercial VTOL and STOL transports that utilize rotors

NASA Technical Reports Server (NTRS)

Magee, J. P.; Clark, R. D.; Widdison, C. A.

1975-01-01

Conceptual design studies are summarized of tandem-rotor helicopter and tilt-rotor aircraft for a short haul transport mission in the 1985 time frame. Vertical takeoff designs of both configurations are discussed, and the impact of external noise criteria on the vehicle designs, performance, and costs are shown. A STOL design for the tilt-rotor configuration is reported, and the effect of removing the vertical takeoff design constraints on the design parameters, fuel economy, and operating cost is discussed.

Investigating the impact of design characteristics on statistical efficiency within discrete choice experiments: A systematic survey.

PubMed

Vanniyasingam, Thuva; Daly, Caitlin; Jin, Xuejing; Zhang, Yuan; Foster, Gary; Cunningham, Charles; Thabane, Lehana

2018-06-01

This study reviews simulation studies of discrete choice experiments to determine (i) how survey design features affect statistical efficiency, (ii) and to appraise their reporting quality. Statistical efficiency was measured using relative design (D-) efficiency, D-optimality, or D-error. For this systematic survey, we searched Journal Storage (JSTOR), Since Direct, PubMed, and OVID which included a search within EMBASE. Searches were conducted up to year 2016 for simulation studies investigating the impact of DCE design features on statistical efficiency. Studies were screened and data were extracted independently and in duplicate. Results for each included study were summarized by design characteristic. Previously developed criteria for reporting quality of simulation studies were also adapted and applied to each included study. Of 371 potentially relevant studies, 9 were found to be eligible, with several varying in study objectives. Statistical efficiency improved when increasing the number of choice tasks or alternatives; decreasing the number of attributes, attribute levels; using an unrestricted continuous "manipulator" attribute; using model-based approaches with covariates incorporating response behaviour; using sampling approaches that incorporate previous knowledge of response behaviour; incorporating heterogeneity in a model-based design; correctly specifying Bayesian priors; minimizing parameter prior variances; and using an appropriate method to create the DCE design for the research question. The simulation studies performed well in terms of reporting quality. Improvement is needed in regards to clearly specifying study objectives, number of failures, random number generators, starting seeds, and the software used. These results identify the best approaches to structure a DCE. An investigator can manipulate design characteristics to help reduce response burden and increase statistical efficiency. Since studies varied in their objectives, conclusions were made on several design characteristics, however, the validity of each conclusion was limited. Further research should be conducted to explore all conclusions in various design settings and scenarios. Additional reviews to explore other statistical efficiency outcomes and databases can also be performed to enhance the conclusions identified from this review.

Quasi-experimental designs in practice-based research settings: design and implementation considerations.

PubMed

Handley, Margaret A; Schillinger, Dean; Shiboski, Stephen

2011-01-01

Although randomized controlled trials are often a gold standard for determining intervention effects, in the area of practice-based research (PBR), there are many situations in which individual randomization is not possible. Alternative approaches to evaluating interventions have received increased attention, particularly those that can retain elements of randomization such that they can be considered "controlled" trials. Methodological design elements and practical implementation considerations for two quasi-experimental design approaches that have considerable promise in PBR settings--the stepped-wedge design, and a variant of this design, a wait-list cross-over design, are presented along with a case study from a recent PBR intervention for patients with diabetes. PBR-relevant design features include: creation of a cohort over time that collects control data but allows all participants (clusters or patients) to receive the intervention; staggered introduction of clusters; multiple data collection points; and one-way cross-over into the intervention arm. Practical considerations include: randomization versus stratification, training run in phases; and extended time period for overall study completion. Several design features of practice based research studies can be adapted to local circumstances yet retain elements to improve methodological rigor. Studies that utilize these methods, such as the stepped-wedge design and the wait-list cross-over design, can increase the evidence base for controlled studies conducted within the complex environment of PBR.

Research designs and making causal inferences from health care studies.

PubMed

Flannelly, Kevin J; Jankowski, Katherine R B

2014-01-01

This article summarizes the major types of research designs used in healthcare research, including experimental, quasi-experimental, and observational studies. Observational studies are divided into survey studies (descriptive and correlational studies), case-studies and analytic studies, the last of which are commonly used in epidemiology: case-control, retrospective cohort, and prospective cohort studies. Similarities and differences among the research designs are described and the relative strength of evidence they provide is discussed. Emphasis is placed on five criteria for drawing causal inferences that are derived from the writings of the philosopher John Stuart Mill, especially his methods or canons. The application of the criteria to experimentation is explained. Particular attention is given to the degree to which different designs meet the five criteria for making causal inferences. Examples of specific studies that have used various designs in chaplaincy research are provided.

Modified Toxicity Probability Interval Design: A Safer and More Reliable Method Than the 3 + 3 Design for Practical Phase I Trials

PubMed Central

Ji, Yuan; Wang, Sue-Jane

2013-01-01

The 3 + 3 design is the most common choice among clinicians for phase I dose-escalation oncology trials. In recent reviews, more than 95% of phase I trials have been based on the 3 + 3 design. Given that it is intuitive and its implementation does not require a computer program, clinicians can conduct 3 + 3 dose escalations in practice with virtually no logistic cost, and trial protocols based on the 3 + 3 design pass institutional review board and biostatistics reviews quickly. However, the performance of the 3 + 3 design has rarely been compared with model-based designs in simulation studies with matched sample sizes. In the vast majority of statistical literature, the 3 + 3 design has been shown to be inferior in identifying true maximum-tolerated doses (MTDs), although the sample size required by the 3 + 3 design is often orders-of-magnitude smaller than model-based designs. In this article, through comparative simulation studies with matched sample sizes, we demonstrate that the 3 + 3 design has higher risks of exposing patients to toxic doses above the MTD than the modified toxicity probability interval (mTPI) design, a newly developed adaptive method. In addition, compared with the mTPI design, the 3 + 3 design does not yield higher probabilities in identifying the correct MTD, even when the sample size is matched. Given that the mTPI design is equally transparent, costless to implement with free software, and more flexible in practical situations, we highly encourage its adoption in early dose-escalation studies whenever the 3 + 3 design is also considered. We provide free software to allow direct comparisons of the 3 + 3 design with other model-based designs in simulation studies with matched sample sizes. PMID:23569307

Analysis of Combined Data from Heterogeneous Study Designs: A Methodological Proposal from the Patient Navigation Research program

PubMed Central

Roetzheim, Richard G.; Freund, Karen M.; Corle, Don K.; Murray, David M.; Snyder, Frederick R.; Kronman, Andrea C.; Jean-Pierre, Pascal; Raich, Peter C.; Holden, Alan E. C.; Darnell, Julie S.; Warren-Mears, Victoria; Patierno, Steven; Design, PNRP; Committee, Analysis

2013-01-01

Background The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, each employing its own unique study design. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from members of the PNRP Design and Analysis Committee Purpose To review possible methodologies for analyzing combined data arising from heterogeneous study designs. Methods The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. Conclusions were based on simple consensus. The five approaches reviewed included: 1) Analyzing and reporting each project separately, 2) Combining data from all projects and performing an individual-level analysis, 3) Pooling data from projects having similar study designs, 4) Analyzing pooled data using a prospective meta analytic technique, 5) Analyzing pooled data utilizing a novel simulated group randomized design. Results Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and in their impact from differing project sample sizes. Limitations The conclusions reached were based on expert opinion and not derived from actual analyses performed. Conclusions The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multi-site community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become more salient. Discussion of the analytic issues faced by the PNRP and the methodological approaches we considered may be of value to other prospective community-based research programs. PMID:22273587

Analysis of combined data from heterogeneous study designs: an applied example from the patient navigation research program.

PubMed

Roetzheim, Richard G; Freund, Karen M; Corle, Don K; Murray, David M; Snyder, Frederick R; Kronman, Andrea C; Jean-Pierre, Pascal; Raich, Peter C; Holden, Alan Ec; Darnell, Julie S; Warren-Mears, Victoria; Patierno, Steven

2012-04-01

The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, with similar clinical criteria but with different study designs. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed-upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from the members of the PNRP Design and Analysis Committee. To review possible methodologies for analyzing combined data arising from heterogeneous study designs. The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. The conclusions were based on simple consensus. The five approaches reviewed included the following: (1) analyzing and reporting each project separately, (2) combining data from all projects and performing an individual-level analysis, (3) pooling data from projects having similar study designs, (4) analyzing pooled data using a prospective meta-analytic technique, and (5) analyzing pooled data utilizing a novel simulated group-randomized design. Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and to accommodate differing project sample sizes. The conclusions reached were based on expert opinion and not derived from actual analyses performed. The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multisite community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become more salient. Discussion of the analytic issues faced by the PNRP and the methodological approaches we considered may be of value to other prospective community-based research programs.

User-Centered Iterative Design of a Collaborative Virtual Environment

DTIC Science & Technology

2001-03-01

cognitive task analysis methods to study land navigators. This study was intended to validate the use of user-centered design methodologies for the design of...have explored the cognitive aspects of collaborative human way finding and design for collaborative virtual environments. Further investigation of design paradigms should include cognitive task analysis and behavioral task analysis.

Applying a Conceptual Design Framework to Study Teachers' Use of Educational Technology

ERIC Educational Resources Information Center

Holmberg, Jörgen

2017-01-01

Theoretical outcomes of design-based research (DBR) are often presented in the form of local theory design principles. This article suggests a complementary theoretical construction in DBR, in the form of a "design framework" at a higher abstract level, to study and inform educational design with ICT in different situated contexts.…

The Statistical Power of the Cluster Randomized Block Design with Matched Pairs--A Simulation Study

ERIC Educational Resources Information Center

Dong, Nianbo; Lipsey, Mark

2010-01-01

This study uses simulation techniques to examine the statistical power of the group- randomized design and the matched-pair (MP) randomized block design under various parameter combinations. Both nearest neighbor matching and random matching are used for the MP design. The power of each design for any parameter combination was calculated from…

AASHTO mechanistic-empirical pavement design guide parametric study.

DOT National Transportation Integrated Search

2012-03-01

This study focuses on assessing the robustness of the AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG v 1.1) for rigid pavement : design projects in Wisconsin. The primary tasks conducted in this study included performing sensitivity analys...

Towards non-conventional methods of designing register-based epidemiological studies: An application to pediatric research.

PubMed

Gong, Tong; Brew, Bronwyn; Sjölander, Arvid; Almqvist, Catarina

2017-07-01

Various epidemiological designs have been applied to investigate the causes and consequences of fetal growth restriction in register-based observational studies. This review seeks to provide an overview of several conventional designs, including cohort, case-control and more recently applied non-conventional designs such as family-based designs. We also discuss some practical points regarding the application and interpretation of family-based designs. Definitions of each design, the study population, the exposure and the outcome measures are briefly summarised. Examples of study designs are taken from the field of low birth-weight research for illustrative purposes. Also examined are relative advantages and disadvantages of each design in terms of assumptions, potential selection and information bias, confounding and generalisability. Kinship data linkage, statistical models and result interpretation are discussed specific to family-based designs. When all information is retrieved from registers, there is no evident preference of the case-control design over the cohort design to estimate odds ratios. All conventional designs included in the review are prone to bias, particularly due to residual confounding. Family-based designs are able to reduce such bias and strengthen causal inference. In the field of low birth-weight research, family-based designs have been able to confirm a negative association not confounded by genetic or shared environmental factors between low birth weight and the risk of asthma. We conclude that there is a broader need for family-based design in observational research as evidenced by the meaningful contributions to the understanding of the potential causal association between low birth weight and subsequent outcomes.

Paired split-plot designs of multireader multicase studies.

PubMed

Chen, Weijie; Gong, Qi; Gallas, Brandon D

2018-07-01

The widely used multireader multicase ROC study design for comparing imaging modalities is the fully crossed (FC) design: every reader reads every case of both modalities. We investigate paired split-plot (PSP) designs that may allow for reduced cost and increased flexibility compared with the FC design. In the PSP design, case images from two modalities are read by the same readers, thereby the readings are paired across modalities. However, within each modality, not every reader reads every case. Instead, both the readers and the cases are partitioned into a fixed number of groups and each group of readers reads its own group of cases-a split-plot design. Using a [Formula: see text]-statistic based variance analysis for AUC (i.e., area under the ROC curve), we show analytically that precision can be gained by the PSP design as compared with the FC design with the same number of readers and readings. Equivalently, we show that the PSP design can achieve the same statistical power as the FC design with a reduced number of readings. The trade-off for the increased precision in the PSP design is the cost of collecting a larger number of truth-verified patient cases than the FC design. This means that one can trade-off between different sources of cost and choose a least burdensome design. We provide a validation study to show the iMRMC software can be reliably used for analyzing data from both FC and PSP designs. Finally, we demonstrate the advantages of the PSP design with a reader study comparing full-field digital mammography with screen-film mammography.

21 CFR 514.117 - Adequate and well-controlled studies.

Code of Federal Regulations, 2011 CFR

2011-04-01

... experimental units. When the effect of such variables is accounted for by an appropriate design, and when... and well-controlled study should provide sufficient details of study design, conduct, and analysis to... the new animal drug used in the study. (4) The study uses a design that permits a valid comparison...

21 CFR 514.117 - Adequate and well-controlled studies.

Code of Federal Regulations, 2012 CFR

2012-04-01

... experimental units. When the effect of such variables is accounted for by an appropriate design, and when... and well-controlled study should provide sufficient details of study design, conduct, and analysis to... the new animal drug used in the study. (4) The study uses a design that permits a valid comparison...

21 CFR 514.117 - Adequate and well-controlled studies.

Code of Federal Regulations, 2014 CFR

2014-04-01

... experimental units. When the effect of such variables is accounted for by an appropriate design, and when... and well-controlled study should provide sufficient details of study design, conduct, and analysis to... the new animal drug used in the study. (4) The study uses a design that permits a valid comparison...

21 CFR 514.117 - Adequate and well-controlled studies.

Code of Federal Regulations, 2013 CFR

2013-04-01

... experimental units. When the effect of such variables is accounted for by an appropriate design, and when... and well-controlled study should provide sufficient details of study design, conduct, and analysis to... the new animal drug used in the study. (4) The study uses a design that permits a valid comparison...

21 CFR 514.117 - Adequate and well-controlled studies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... experimental units. When the effect of such variables is accounted for by an appropriate design, and when... and well-controlled study should provide sufficient details of study design, conduct, and analysis to... the new animal drug used in the study. (4) The study uses a design that permits a valid comparison...

Analytical considerations for study design

Treesearch

Barry R. Noon; William M. Block

1990-01-01

Studies of the foraging behaviors of birds have been largely descriptive and comparative. One might then expect studies with similar objectives to have similar study designs but that is not the case. Papers in this symposium that focused specifically on study design contain a diversity of biological perspectives. Similarly, there is no accord among statisticians on...

Study of Army Design Hover Criteria

DTIC Science & Technology

2017-09-01

SPECIAL REPORT RDMR-AE-17-02 STUDY OF ARMY DESIGN HOVER CRITERIA Douglas V. Horacek Command Analysis Directorate Aviation...OF THE ARMY POSITION UNLESS SO DESIGNATED BY OTHER AUTHORIZED DOCUMENTS. TRADE NAMES USE OF TRADE NAMES OR MANUFACTURERS IN THIS REPORT...Study of Army Design Hover Criteria 5. FUNDING NUMBERS 6. AUTHOR(S) Douglas V. Horacek and Mark E. Calvert 7. PERFORMING ORGANIZATION

Design and Construction Process of Two LEED Certified University Buildings: A Collective Case Study

ERIC Educational Resources Information Center

Rich, Kim

2011-01-01

This study was conducted at the early stages of integrating LEED into the design process in which a clearer understanding of what sustainable and ecological design was about became evident through the duration of designing and building of two academic buildings on a university campus. In this case study, due to utilizing a grounded theory…

Creative Minds Abroad: How Design Students Make Meaning of Their International Education Experiences

ERIC Educational Resources Information Center

Johnson, Rachel Sherman

2016-01-01

The purpose of this study is to explore the ways in which students majoring in a design discipline make meaning of their study abroad experiences in relation to their creativity and creative design work. Students and recent alumni from the College of Design (CDes) at the University of Minnesota-Twin Cities (UMTC) who had studied abroad formed the…

The Role of Hospital Design in Reducing Anxiety for Pediatric Patients.

PubMed

Cartland, Jenifer; Ruch-Ross, Holly S; Carr, Lauren; Hall, Audrey; Olsen, Richard; Rosendale, Ellen; Ruohonen, Susan

2018-01-01

To study the impact of hospital design on patient and family experiences during and after hospitalization. Hospitalization can be psychologically traumatic for children. Few research studies have studied the role of the design of the hospital environment in mitigating that traumatic experience. The study employs a two-group posttest and follow-up design to compare the impact of hospitalization on child anxiety and parent stress. It compares the experiences of children (ages 3-17) hospitalized at a new facility designed to support child-centered care and with family-friendly features with an older facility that did not have these features. The new facility was a replacement of the old one, so that many challenges to comparison are addressed. Controlling for the facts of hospitalization, patient demographics, and the child's typical anxiety level, children in the new facility experienced less anxiety than in the old facility. The study does not provide evidence that the hospital design reduced the psychological sequelae of hospitalization. Parents and children found different features of the hospital to be restorative. The study supports the use of Ulrich's theory of supportive design to children's healthcare environments, though what is experienced as supportive design will vary by the developmental stage of the child.

The Design and Analysis of Salmonid Tagging Studies in the Columbia Basin : Volume II: Experiment Salmonid Survival with Combined PIT-CWT Tagging.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newman, Ken

1997-06-01

Experiment designs to estimate the effect of transportation on survival and return rates of Columbia River system salmonids are discussed along with statistical modeling techniques. Besides transportation, river flow and dam spill are necessary components in the design and analysis otherwise questions as to the effects of reservoir drawdowns and increased dam spill may never be satisfactorily answered. Four criteria for comparing different experiment designs are: (1) feasibility, (2) clarity of results, (3) scope of inference, and (4) time to learn. In this report, alternative designs for conducting experimental manipulations of smolt tagging studies to study effects of river operationsmore » such as flow levels, spill fractions, and transporting outmigrating salmonids around dams in the Columbia River system are presented. The principles of study design discussed in this report have broad implications for the many studies proposed to investigate both smolt and adult survival relationships. The concepts are illustrated for the case of the design and analysis of smolt transportation experiments. The merits of proposed transportation studies should be measured relative to these principles of proper statistical design and analysis.« less

Preliminary design of flight hardware for two-phase fluid research

NASA Technical Reports Server (NTRS)

Hustvedt, D. C.; Oonk, R. L.

1982-01-01

This study defined the preliminary designs of flight software for the Space Shuttle Orbiter for three two-phase fluid research experiments: (1) liquid reorientation - to study the motion of liquid in tanks subjected to small accelerations; (2) pool boiling - to study low-gravity boiling from horizontal cylinders; and (3) flow boiling - to study low-gravity forced flow boiling heat transfer and flow phenomena in a heated horizontal tube. The study consisted of eight major tasks: reassessment of the existing experiment designs, assessment of the Spacelab facility approach, assessment of the individual carry-on approach, selection of the preferred approach, preliminary design of flight hardware, safety analysis, preparation of a development plan, estimates of detailed design, fabrication and ground testing costs. The most cost effective design approach for the experiments is individual carry-ons in the Orbiter middeck. The experiments were designed to fit into one or two middeck lockers. Development schedules for the detailed design, fabrication and ground testing ranged from 15 1/2 to 18 months. Minimum costs (in 1981 dollars) ranged from $463K for the liquid reorientation experiment to $998K for the pool boiling experiment.

Innovative tools for quality assessment: integrated quality criteria for review of multiple study designs (ICROMS).

PubMed

Zingg, W; Castro-Sanchez, E; Secci, F V; Edwards, R; Drumright, L N; Sevdalis, N; Holmes, A H

2016-04-01

With the aim to facilitate a more comprehensive review process in public health including patient safety, we established a tool that we have termed ICROMS (Integrated quality Criteria for the Review Of Multiple Study designs), which unifies, integrates and refines current quality criteria for a large range of study designs including qualitative research. Review, pilot testing and expert consensus. The tool is the result of an iterative four phase process over two years: 1) gathering of established criteria for assessing controlled, non-controlled and qualitative study designs; 2) pilot testing of a first version in two systematic reviews on behavioural change in infection prevention and control and in antibiotic prescribing; 3) further refinement and adding of additional study designs in the context of the European Centre for Disease Prevention and Control funded project 'Systematic review and evidence-based guidance on organisation of hospital infection control programmes' (SIGHT); 4) scrutiny by the pan-European expert panel of the SIGHT project, which had the objective of ensuring robustness of the systematic review. ICROMS includes established quality criteria for randomised studies, controlled before-and-after studies and interrupted time series, and incorporates criteria for non-controlled before-and-after studies, cohort studies and qualitative studies. The tool consists of two parts: 1) a list of quality criteria specific for each study design, as well as criteria applicable across all study designs by using a scoring system; 2) a 'decision matrix', which specifies the robustness of the study by identifying minimum requirements according to the study type and the relevance of the study to the review question. The decision matrix directly determines inclusion or exclusion of a study in the review. ICROMS was applied to a series of systematic reviews to test its feasibility and usefulness in the appraisal of multiple study designs. The tool was applicable across a wide range of study designs and outcome measures. ICROMS is a comprehensive yet feasible appraisal of a large range of study designs to be included in systematic reviews addressing behaviour change studies in patient safety and public health. The tool is sufficiently flexible to be applied to a variety of other domains in health-related research. Beyond its application to systematic reviews, we envisage that ICROMS can have a positive effect on researchers to be more rigorous in their study design and more diligent in their reporting. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Statistical power calculations for mixed pharmacokinetic study designs using a population approach.

PubMed

Kloprogge, Frank; Simpson, Julie A; Day, Nicholas P J; White, Nicholas J; Tarning, Joel

2014-09-01

Simultaneous modelling of dense and sparse pharmacokinetic data is possible with a population approach. To determine the number of individuals required to detect the effect of a covariate, simulation-based power calculation methodologies can be employed. The Monte Carlo Mapped Power method (a simulation-based power calculation methodology using the likelihood ratio test) was extended in the current study to perform sample size calculations for mixed pharmacokinetic studies (i.e. both sparse and dense data collection). A workflow guiding an easy and straightforward pharmacokinetic study design, considering also the cost-effectiveness of alternative study designs, was used in this analysis. Initially, data were simulated for a hypothetical drug and then for the anti-malarial drug, dihydroartemisinin. Two datasets (sampling design A: dense; sampling design B: sparse) were simulated using a pharmacokinetic model that included a binary covariate effect and subsequently re-estimated using (1) the same model and (2) a model not including the covariate effect in NONMEM 7.2. Power calculations were performed for varying numbers of patients with sampling designs A and B. Study designs with statistical power >80% were selected and further evaluated for cost-effectiveness. The simulation studies of the hypothetical drug and the anti-malarial drug dihydroartemisinin demonstrated that the simulation-based power calculation methodology, based on the Monte Carlo Mapped Power method, can be utilised to evaluate and determine the sample size of mixed (part sparsely and part densely sampled) study designs. The developed method can contribute to the design of robust and efficient pharmacokinetic studies.

Introductory Statistics Students' Conceptual Understanding of Study Design and Conclusions

NASA Astrophysics Data System (ADS)

Fry, Elizabeth Brondos

Recommended learning goals for students in introductory statistics courses include the ability to recognize and explain the key role of randomness in designing studies and in drawing conclusions from those studies involving generalizations to a population or causal claims (GAISE College Report ASA Revision Committee, 2016). The purpose of this study was to explore introductory statistics students' understanding of the distinct roles that random sampling and random assignment play in study design and the conclusions that can be made from each. A study design unit lasting two and a half weeks was designed and implemented in four sections of an undergraduate introductory statistics course based on modeling and simulation. The research question that this study attempted to answer is: How does introductory statistics students' conceptual understanding of study design and conclusions (in particular, unbiased estimation and establishing causation) change after participating in a learning intervention designed to promote conceptual change in these areas? In order to answer this research question, a forced-choice assessment called the Inferences from Design Assessment (IDEA) was developed as a pretest and posttest, along with two open-ended assignments, a group quiz and a lab assignment. Quantitative analysis of IDEA results and qualitative analysis of the group quiz and lab assignment revealed that overall, students' mastery of study design concepts significantly increased after the unit, and the great majority of students successfully made the appropriate connections between random sampling and generalization, and between random assignment and causal claims. However, a small, but noticeable portion of students continued to demonstrate misunderstandings, such as confusion between random sampling and random assignment.

Comparative effectiveness of colony-stimulating factors in febrile neutropenia prophylaxis: how results are affected by research design.

PubMed

Henk, Henry J; Li, Xiaoyan; Becker, Laura K; Xu, Hairong; Gong, Qi; Deeter, Robert G; Barron, Richard L

2015-01-01

To examine the impact of research design on results in two published comparative effectiveness studies. Guidelines for comparative effectiveness research have recommended incorporating disease process in study design. Based on the recommendations, we develop a checklist of considerations and apply the checklist in review of two published studies on comparative effectiveness of colony-stimulating factors. Both studies used similar administrative claims data, but different methods, which resulted in directionally different estimates. Major design differences between the two studies include: whether the timing of intervention in disease process was identified and whether study cohort and outcome assessment period were defined based on this temporal relationship. Disease process and timing of intervention should be incorporated into the design of comparative effectiveness studies.

Conceptual design and analysis of a dynamic scale model of the Space Station Freedom

NASA Technical Reports Server (NTRS)

Davis, D. A.; Gronet, M. J.; Tan, M. K.; Thorne, J.

1994-01-01

This report documents the conceptual design study performed to evaluate design options for a subscale dynamic test model which could be used to investigate the expected on-orbit structural dynamic characteristics of the Space Station Freedom early build configurations. The baseline option was a 'near-replica' model of the SSF SC-7 pre-integrated truss configuration. The approach used to develop conceptual design options involved three sets of studies: evaluation of the full-scale design and analysis databases, conducting scale factor trade studies, and performing design sensitivity studies. The scale factor trade study was conducted to develop a fundamental understanding of the key scaling parameters that drive design, performance and cost of a SSF dynamic scale model. Four scale model options were estimated: 1/4, 1/5, 1/7, and 1/10 scale. Prototype hardware was fabricated to assess producibility issues. Based on the results of the study, a 1/4-scale size is recommended based on the increased model fidelity associated with a larger scale factor. A design sensitivity study was performed to identify critical hardware component properties that drive dynamic performance. A total of 118 component properties were identified which require high-fidelity replication. Lower fidelity dynamic similarity scaling can be used for non-critical components.

Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Conceptual Design Engineering Report (CDER) supplement. Magnet system special investigations

NASA Technical Reports Server (NTRS)

1981-01-01

The results of magnet system special investigations listed below are summarized: 4 Tesla Magnet Alternate Design Study; 6 Tesla Magnet Manufacturability Study. The conceptual design for a 4 Tesla superconducting magnet system for use with an alternate (supersonic) ETF power train is described, and estimated schedule and cost are identified. The magnet design is scaled from the ETF 6 T Tesla design. Results of a manufacturability study and a revised schedule and cost estimate for the ETF 6 T magnet are reported. Both investigations are extensions of the conceptual design of a 6 T magnet system performed earlier as a part of the overall MED-ETF conceptual design described in Conceptual Design Engineering Report (CDER) Vol. V, System Design Description (SDD) 503 dated September, 1981, DOE/NASA/0224-1; NASA CR-165/52.

Design trade study for a 4-meter off-axis primary mirror substrate and mount for the Habitable-zone Exoplanet Direct Imaging Mission

NASA Astrophysics Data System (ADS)

Arnold, William R.; Stahl, H. Philip

2017-09-01

An extensive trade study was conducted to evaluate primary mirror substrate design architectures for the HabEx mission baseline 4-meter off-axis telescope. The study's purpose is not to produce a final design, but rather to established a design methodology for matching the mirror's properties (mass and stiffness) with the mission's optical performance specifications (static dynamic wavefront error, WFE). The study systematically compares the effect of proven design elements (closed-back vs open-back vs partial-back; meniscus vs flat back vs shaped back; etc.), which can be implemented with proven space mirror materials (ULE and Zerodur), on static and dynamic WFE. Additionally, the study compares static and dynamic WFE of each substrate point design integrated onto three and six point mounts.

Applications of mixed-methods methodology in clinical pharmacy research.

PubMed

Hadi, Muhammad Abdul; Closs, S José

2016-06-01

Introduction Mixed-methods methodology, as the name suggests refers to mixing of elements of both qualitative and quantitative methodologies in a single study. In the past decade, mixed-methods methodology has gained popularity among healthcare researchers as it promises to bring together the strengths of both qualitative and quantitative approaches. Methodology A number of mixed-methods designs are available in the literature and the four most commonly used designs in healthcare research are: the convergent parallel design, the embedded design, the exploratory design, and the explanatory design. Each has its own unique advantages, challenges and procedures and selection of a particular design should be guided by the research question. Guidance on designing, conducting and reporting mixed-methods research is available in the literature, so it is advisable to adhere to this to ensure methodological rigour. When to use it is best suited when the research questions require: triangulating findings from different methodologies to explain a single phenomenon; clarifying the results of one method using another method; informing the design of one method based on the findings of another method, development of a scale/questionnaire and answering different research questions within a single study. Two case studies have been presented to illustrate possible applications of mixed-methods methodology. Limitations Possessing the necessary knowledge and skills to undertake qualitative and quantitative data collection, analysis, interpretation and integration remains the biggest challenge for researchers conducting mixed-methods studies. Sequential study designs are often time consuming, being in two (or more) phases whereas concurrent study designs may require more than one data collector to collect both qualitative and quantitative data at the same time.

Anthropometric Procedures for Protective Equipment Sizing and Design

PubMed Central

Hsiao, Hongwei

2015-01-01

Objectives This article presented four anthropometric theories (univariate, bivariate/probability distribution, multivariate, and shape-based methods) for protective equipment design decisions. Background While the significance of anthropometric information for product design is well recognized, designers continue to face challenges in selecting efficient anthropometric data processing methods and translating the acquired information into effective product designs. Methods For this study, 100 farm tractor operators, 3,718 respirator users, 951 firefighters, and 816 civilian workers participated in four studies on the design of tractor roll-over protective structures (ROPS), respirator test panels, fire truck cabs, and fall-arrest harnesses, respectively. Their anthropometry and participant-equipment interfaces were evaluated. Results Study 1 showed a need to extend the 90-cm vertical clearance for tractor ROPS in the current industrial standards to 98.3 to 101.3 cm. Study 2 indicated that current respirator test panel would have excluded 10% of the male firefighter population; a systematic adjustment to the boundaries of test panel cells was suggested. Study 3 provided 24 principal component analysis-based firefighter body models to facilitate fire truck cab design. Study 4 developed an improved gender-based fall-arrest harness sizing scheme to supplant the current unisex system. Conclusions This article presented four anthropometric approaches and a six-step design paradigm for ROPS, respirator test panel, fire truck cab, and fall-arrest harness applications, which demonstrated anthropometric theories and practices for defining protective equipment fit and sizing schemes. Applications The study provided a basis for equipment designers, standards writers, and industry manufacturers to advance anthropometric applications for product design and improve product efficacy. PMID:23516791

78 FR 25990 - Applications for New Awards; Investing in Innovation Fund, Validation Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-03

...-- (1) Correlational study with statistical controls for selection bias; (2) Quasi-experimental study... Higher Education Act of 1965, as amended. Quasi-experimental design study means a study using a design that attempts to approximate an experimental design by identifying a comparison group that is similar...

76 FR 38663 - Agency Information Collection Activities; Proposed Collection; Comment Request; Experimental...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... on the Experimental Study of Comparative Direct-to-Consumer (DTC) Advertising. This study is designed... indirect comparisons, using comparative visuals, and using vaguer language. This study is designed to apply... Effectiveness) studies designed to explore comparative effectiveness. When this large project is completed, FDA...

Implementing E-Learning Designed Courses in General Education

ERIC Educational Resources Information Center

Nuangchalerm, Prasart; Sakkumduang, Krissada; Uhwha, Suleepornn; Chansirisira, Pacharawit

2014-01-01

The aim of this study is to implement e-learning designed course for general education. The study employed 3 phases for developing e-learning course: contextual study, designing, and implementing. Two courses general education, 217 undergraduate students are participated the study. Research tool consisted of interview about e-learning form and…

Telework and the Manager Employee Relationship

DTIC Science & Technology

2017-04-06

Research Design This research project utilized the results of published studies, surveys , and theories to examine the impact of telework on the manager...13 Research Design ...paper were based on the results of studies and surveys that were not designed nor conducted by the author of this study. Nor were those studies

Quasi-experimental Studies in the Fields of Infection Control and Antibiotic Resistance, Ten Years Later: A Systematic Review.

PubMed

Alsaggaf, Rotana; O'Hara, Lyndsay M; Stafford, Kristen A; Leekha, Surbhi; Harris, Anthony D

2018-02-01

OBJECTIVE A systematic review of quasi-experimental studies in the field of infectious diseases was published in 2005. The aim of this study was to assess improvements in the design and reporting of quasi-experiments 10 years after the initial review. We also aimed to report the statistical methods used to analyze quasi-experimental data. DESIGN Systematic review of articles published from January 1, 2013, to December 31, 2014, in 4 major infectious disease journals. METHODS Quasi-experimental studies focused on infection control and antibiotic resistance were identified and classified based on 4 criteria: (1) type of quasi-experimental design used, (2) justification of the use of the design, (3) use of correct nomenclature to describe the design, and (4) statistical methods used. RESULTS Of 2,600 articles, 173 (7%) featured a quasi-experimental design, compared to 73 of 2,320 articles (3%) in the previous review (P<.01). Moreover, 21 articles (12%) utilized a study design with a control group; 6 (3.5%) justified the use of a quasi-experimental design; and 68 (39%) identified their design using the correct nomenclature. In addition, 2-group statistical tests were used in 75 studies (43%); 58 studies (34%) used standard regression analysis; 18 (10%) used segmented regression analysis; 7 (4%) used standard time-series analysis; 5 (3%) used segmented time-series analysis; and 10 (6%) did not utilize statistical methods for comparisons. CONCLUSIONS While some progress occurred over the decade, it is crucial to continue improving the design and reporting of quasi-experimental studies in the fields of infection control and antibiotic resistance to better evaluate the effectiveness of important interventions. Infect Control Hosp Epidemiol 2018;39:170-176.

[The case-case-time-control study design].

PubMed

Wang, Jing; Zhuo, Lin; Zhan, Siyan

2014-12-01

Although the 'self-matched case-only studies' (such as the case-cross-over or self-controlled case-series method) can control the time-invariant confounders (measured or unmeasured) through design of the study, however, they can not control those confounders that vary with time. A bidirectional case-crossover design can be used to adjust the exposure-time trends. In the areas of pharmaco-epidemiology, illness often influence the future use of medications, making a bidirectional study design problematic. Suissa's case-time-control design combines the case-crossover and the case-control design which could adjust for exposure-trend bias, but the control group may reintroduce selection bias, if the matching does not go well. We propose a "case-case-time-control" design which is an extension of the case-time-control design. However, rather than using a sample of external controls, we choose those future cases as controls for current cases to counter the bias that arising from temporal trends caused by exposure to the target of interest. In the end of this article we will discuss the strength and limitations of this design based on an applied example.

Assessing the applicability of the Taguchi design method to an interrill erosion study

NASA Astrophysics Data System (ADS)

Zhang, F. B.; Wang, Z. L.; Yang, M. Y.

2015-02-01

Full-factorial experimental designs have been used in soil erosion studies, but are time, cost and labor intensive, and sometimes they are impossible to conduct due to the increasing number of factors and their levels to consider. The Taguchi design is a simple, economical and efficient statistical tool that only uses a portion of the total possible factorial combinations to obtain the results of a study. Soil erosion studies that use the Taguchi design are scarce and no comparisons with full-factorial designs have been made. In this paper, a series of simulated rainfall experiments using a full-factorial design of five slope lengths (0.4, 0.8, 1.2, 1.6, and 2 m), five slope gradients (18%, 27%, 36%, 48%, and 58%), and five rainfall intensities (48, 62.4, 102, 149, and 170 mm h-1) were conducted. Validation of the applicability of a Taguchi design to interrill erosion experiments was achieved by extracting data from the full dataset according to a theoretical Taguchi design. The statistical parameters for the mean quasi-steady state erosion and runoff rates of each test, the optimum conditions for producing maximum erosion and runoff, and the main effect and percentage contribution of each factor obtained from the full-factorial and Taguchi designs were compared. Both designs generated almost identical results. Using the experimental data from the Taguchi design, it was possible to accurately predict the erosion and runoff rates under the conditions that had been excluded from the Taguchi design. All of the results obtained from analyzing the experimental data for both designs indicated that the Taguchi design could be applied to interrill erosion studies and could replace full-factorial designs. This would save time, labor and costs by generally reducing the number of tests to be conducted. Further work should test the applicability of the Taguchi design to a wider range of conditions.

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 2. Appendix A: Design study for a SLEEC actuation system

NASA Technical Reports Server (NTRS)

Thompson, D. S.

1986-01-01

The results are presented of a design feasibility study of a self-contained (powered) actuation system for a Shingle Lap Extendible Exit Cone (SLEEC) for Transportation System (STS). The evolution of the SLEEC actuation system design is reviewed, the final design concept is summarized, and the results of the detailed study of the final concept of the actuation system are treated. A conservative design using proven mechanical components was established as a major program priority. The final mechanical design has a very low development risk since the components, which consist of ballscrews, gearing, flexible shaft drives, and aircraft cables, have extensive aerospace applications and a history of proven reliability. The mathematical model studies have shown that little or no power is required to deploy the SLEEC actuation system because acceleration forces and internal pressure from the rocket plume provide the required energies. A speed control brake is incorporated in the design in order to control the rate of deployment.

Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition study

NASA Technical Reports Server (NTRS)

Hughes, C. W.

1983-01-01

Studies were conducted by Hughes Helicopters, Inc. (HHI) for the Applied Technology Laboratory and Aeromechanics Laboratory, U.S. Army Research and Technology Laboratories (AVRADCOM) and the Ames Research Center, National Aeronautics and Space Administration (NASA). Results of predesign studies of advanced main rotor hubs, including bearingless designs, are presented in this report. In addition, the Government's rotor design goals and specifications were reviewed and evaluated. Hub concepts were designed and qualitatively evaluated in order to select the two most promising concepts for further development. Various flexure designs, control systems, and pitchcase designs were investigated during the initial phases of this study. The two designs selected for additional development were designated the V-strap and flat-strap cruciform hubs. These hubs were designed for a four bladed rotor and were sized for 18,400 pounds gross weight with the same diameter (62 feet) and solidity (23 inch chord) as the existing rotor on the Rotor Systems Research Aircraft (RSRA).

Shape design of an optimal comfortable pillow based on the analytic hierarchy process method

PubMed Central

Liu, Shuo-Fang; Lee, Yann-Long; Liang, Jung-Chin

2011-01-01

Objective Few studies have analyzed the shapes of pillows. The purpose of this study was to investigate the relationship between the pillow shape design and subjective comfort level for asymptomatic subjects. Methods Four basic pillow designs factors were selected on the basis of literature review and recombined into 8 configurations for testing the rank of degrees of comfort. The data were analyzed by the analytic hierarchy process method to determine the most comfortable pillow. Results Pillow number 4 was the most comfortable pillow in terms of head, neck, shoulder, height, and overall comfort. The design factors of pillow number 4 were using a combination of standard, cervical, and shoulder pillows. A prototype of this pillow was developed on the basis of the study results for designing future pillow shapes. Conclusions This study investigated the comfort level of particular users and redesign features of a pillow. A deconstruction analysis would simplify the process of determining the most comfortable pillow design and aid designers in designing pillows for groups. PMID:22654680

A Silent Revolution: From Sketching to Coding--A Case Study on Code-Based Design Tool Learning

ERIC Educational Resources Information Center

Xu, Song; Fan, Kuo-Kuang

2017-01-01

Along with the information technology rising, Computer Aided Design activities are becoming more modern and more complex. But learning how to operation these new design tools has become the main problem lying in front of each designer. This study was purpose on finding problems encountered during code-based design tools learning period of…

Designing for Diverse Learning: Case Study of Place-Based Learning in Design and Technologies Pre-Service Teacher Education

ERIC Educational Resources Information Center

Best, Marnie; MacGregor, Denise; Price, Deborah

2017-01-01

Place-based learning experiences in Design and Technologies education connect people and place with design processes and products. Drawing on place-based learning, this case study shares the experiences of eight final year pre-service Design and Technologies education students from the University of South Australia as they collaborated with…

Effect of Study Design on Sample Size in Studies Intended to Evaluate Bioequivalence of Inhaled Short‐Acting β‐Agonist Formulations

PubMed Central

Zeng, Yaohui; Singh, Sachinkumar; Wang, Kai

2017-01-01

Abstract Pharmacodynamic studies that use methacholine challenge to assess bioequivalence of generic and innovator albuterol formulations are generally designed per published Food and Drug Administration guidance, with 3 reference doses and 1 test dose (3‐by‐1 design). These studies are challenging and expensive to conduct, typically requiring large sample sizes. We proposed 14 modified study designs as alternatives to the Food and Drug Administration–recommended 3‐by‐1 design, hypothesizing that adding reference and/or test doses would reduce sample size and cost. We used Monte Carlo simulation to estimate sample size. Simulation inputs were selected based on published studies and our own experience with this type of trial. We also estimated effects of these modified study designs on study cost. Most of these altered designs reduced sample size and cost relative to the 3‐by‐1 design, some decreasing cost by more than 40%. The most effective single study dose to add was 180 μg of test formulation, which resulted in an estimated 30% relative cost reduction. Adding a single test dose of 90 μg was less effective, producing only a 13% cost reduction. Adding a lone reference dose of either 180, 270, or 360 μg yielded little benefit (less than 10% cost reduction), whereas adding 720 μg resulted in a 19% cost reduction. Of the 14 study design modifications we evaluated, the most effective was addition of both a 90‐μg test dose and a 720‐μg reference dose (42% cost reduction). Combining a 180‐μg test dose and a 720‐μg reference dose produced an estimated 36% cost reduction. PMID:29281130

Glasses-type wearable computer displays: usability considerations examined with a 3D glasses case study.

PubMed

Chang, Joonho; Moon, Seung Ki; Jung, Kihyo; Kim, Wonmo; Parkinson, Matthew; Freivalds, Andris; Simpson, Timothy W; Baik, Seon Pill

2018-05-01

This study presents usability considerations and solutions for the design of glasses-type wearable computer displays and examines their effectiveness in a case study. Design countermeasures were investigated by a four-step design process: (1) preliminary design analysis; (2) design idea generation; (3) final design selection; and (4) virtual fitting trial. Three design interventions were devised from the design process: (1) weight balance to reduce pressure concentrated on the nose, (2) compliant temples to accommodate diverse head sizes and (3) a hanger mechanism to help spectacle users hang their wearable display on their eye glasses. To investigate their effectiveness, in the case study, the novel 3D glasses adopting the three interventions were compared with two existing 3D glasses in terms of neck muscle fatigue and subjective discomfort rating. While neck muscle fatigue was not significantly different among the three glasses (p = 0.467), the novel glasses had significantly smaller discomfort ratings (p = 0.009). Relevance to Industry: A four-step design process identified usability considerations and solutions for the design of glasses-type wearable computer displays. A novel 3D glasses was proposed through the process and its effectiveness was validated. The results identify design considerations and opportunities relevant to the emerging wearable display industry.

An Investigation of the Artifacts and Process of Constructing Computers Games about Environmental Science in a Fifth Grade Classroom

ERIC Educational Resources Information Center

Baytak, Ahmet; Land, Susan M.

2011-01-01

This study employed a case study design (Yin, "Case study research, design and methods," 2009) to investigate the processes used by 5th graders to design and develop computer games within the context of their environmental science unit, using the theoretical framework of "constructionism." Ten fifth graders designed computer games using "Scratch"…

Laboratory Experimental Design for a Glycomic Study.

PubMed

Ugrina, Ivo; Campbell, Harry; Vučković, Frano

2017-01-01

Proper attention to study design before, careful conduct of procedures during, and appropriate inference from results after scientific experiments are important in all scientific studies in order to ensure valid and sometimes definitive conclusions can be made. The design of experiments, also called experimental design, addresses the challenge of structuring and conducting experiments to answer the questions of interest as clearly and efficiently as possible.

Characterizing Design Learning through the Use of Language: A Mixed-Methods Study of Engineering Designers. Research Brief

ERIC Educational Resources Information Center

Atman, Cindy; Kilgore, Deborah; McKenna, Ann

2009-01-01

This analysis, that utilizes data from part of the Academic Pathways Study (APS) of the Center for the Advancement of Engineering Education (CAEE), found that as a result of taking a course in engineering design and/or studying engineering for four years, students acquire engineering design language that is common to a larger community of practice…

Factors in Human-Computer Interface Design (A Pilot Study).

DTIC Science & Technology

1994-12-01

This study used a pretest - posttest control group experimental design to test the effect of consistency on speed, retention, and user satisfaction. Four...analysis. The overall methodology was a pretest - posttest control group experimental design using different prototypes to test the effects of...methodology used for this study was a pretest - posttest control group experimental design using different prototypes to test for features of the human

Lunar NTR vehicle design and operations study

NASA Technical Reports Server (NTRS)

Hodge, John

1993-01-01

The results of a lunar nuclear thermal rocket (NTR) vehicle design and operations study are presented in text and graphic form. The objectives of the study were to evaluate the potential applications of a specific NTR design to past and current (First Lunar Outpost) mission profiles for piloted and cargo lunar missions, and to assess the applicability of utilizing lunar vehicle design concepts for Mars missions.

Nanophotonic Devices in Silicon for Nonlinear Optics

DTIC Science & Technology

2010-10-15

record performance  Demonstration of world‟s lowest loss slot waveguides, made in a DOD-trusted foundry (BAE Systems)  Design study showing...highly-cited design study.  Design study on analog links using the above modulators.  Demonstration of the first silicon waveguides for the mid...Hochberg. Design of transmission line driven slot waveguide Mach-Zehnder interferometers and application to analog optical links. Optics Express 2010

A Case Study of Educational Computer Game Design by Middle School Students

ERIC Educational Resources Information Center

An, Yun-Jo

2016-01-01

Only a limited number of research studies have investigated how students design educational computer games and its impact on student learning. In addition, most studies on educational game design by students were conducted in the areas of mathematics and science. Using the qualitative case study approach, this study explored how seventh graders…

Mapping School Design: A Qualitative Study of the Relations among Facilities Design, Curriculum Delivery, and School Climate

ERIC Educational Resources Information Center

Gislason, Neil

2009-01-01

The author conducted a 3-week qualitative case study at the School of Environmental Studies (SES), a senior public school with an environmental studies focus. He argues that SES's physical design facilitates collaborative, multidisciplinary teaching practices especially suited to the school's environmental studies curriculum. He also shows that…

Railroad classification yard design methodology study Elkhart Yard Rehabilitation : a case study

DOT National Transportation Integrated Search

1980-02-01

This interim report documents the application of a railroad classification : yard design methodology to CONRAIL's Elkhart Yard Rehabilitation. This : case study effort represents Phase 2 of a larger effort to develop a yard : design methodology, and ...

Applications of Human Factors in Space

NASA Technical Reports Server (NTRS)

Rajulu, Sudhakar; Margerum, Sarah

2008-01-01

The main question for human factors practitioners is to determine if the user population can be accommodated within a design. Given the wide range of variables feeding into a design, just one of which is human factors, oftentimes designers will have restrictions that may potentially impact the level of accommodation. This paper focuses on two case studies where there have been impacts at the design level that may be detrimental to the ability of the design to meet certain criteria. The studies use novel approaches to determine what, if any, changes in population accommodation levels have occurred and what factors are important when manipulating the design in the future. The results of these studies provide a backbone for future analyses when working with design considerations.

Design study and performance analysis of a high-speed multistage variable-geometry fan for a variable cycle engine

NASA Technical Reports Server (NTRS)

Sullivan, T. J.; Parker, D. E.

1979-01-01

A design technology study was performed to identify a high speed, multistage, variable geometry fan configuration capable of achieving wide flow modulation with near optimum efficiency at the important operating condition. A parametric screening study of the front and rear block fans was conducted in which the influence of major fan design features on weight and efficiency was determined. Key design parameters were varied systematically to determine the fan configuration most suited for a double bypass, variable cycle engine. Two and three stage fans were considered for the front block. A single stage, core driven fan was studied for the rear block. Variable geometry concepts were evaluated to provide near optimum off design performance. A detailed aerodynamic design and a preliminary mechanical design were carried out for the selected fan configuration. Performance predictions were made for the front and rear block fans.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

Optimal cure cycle design for autoclave processing of thick composites laminates: A feasibility study

NASA Technical Reports Server (NTRS)

Hou, Jean W.

1985-01-01

The thermal analysis and the calculation of thermal sensitivity of a cure cycle in autoclave processing of thick composite laminates were studied. A finite element program for the thermal analysis and design derivatives calculation for temperature distribution and the degree of cure was developed and verified. It was found that the direct differentiation was the best approach for the thermal design sensitivity analysis. In addition, the approach of the direct differentiation provided time histories of design derivatives which are of great value to the cure cycle designers. The approach of direct differentiation is to be used for further study, i.e., the optimal cycle design.

Design study for a liquid metal slip ring solar array orientation mechanism

NASA Technical Reports Server (NTRS)

Clark, R. B.

1972-01-01

The design of a single axis orientation mechanism for solar arrays on high power synchronous satellites is studied primarily with respect to providing 116 liquid metal slip rings for reduced friction and improved electrical characteristics. Designs and tradeoff studies for the slip rings and other components are presented. An assembly containing 33 slip rings of three design approaches was designed, fabricated, and vacuum tested to 30 amperes and 30,000 volts. Containment of the liquid metal gallium in large diameter slip rings was difficult. A design approach is presented which is expected to provide improved retention of the liquid metal.

Study for the optimization of a transport aircraft wing for maximum fuel efficiency. Volume 1: Methodology, criteria, aeroelastic model definition and results

NASA Technical Reports Server (NTRS)

Radovcich, N. A.; Dreim, D.; Okeefe, D. A.; Linner, L.; Pathak, S. K.; Reaser, J. S.; Richardson, D.; Sweers, J.; Conner, F.

1985-01-01

Work performed in the design of a transport aircraft wing for maximum fuel efficiency is documented with emphasis on design criteria, design methodology, and three design configurations. The design database includes complete finite element model description, sizing data, geometry data, loads data, and inertial data. A design process which satisfies the economics and practical aspects of a real design is illustrated. The cooperative study relationship between the contractor and NASA during the course of the contract is also discussed.

Better cancer biomarker discovery through better study design.

PubMed

Rundle, Andrew; Ahsan, Habibul; Vineis, Paolo

2012-12-01

High-throughput laboratory technologies coupled with sophisticated bioinformatics algorithms have tremendous potential for discovering novel biomarkers, or profiles of biomarkers, that could serve as predictors of disease risk, response to treatment or prognosis. We discuss methodological issues in wedding high-throughput approaches for biomarker discovery with the case-control study designs typically used in biomarker discovery studies, especially focusing on nested case-control designs. We review principles for nested case-control study design in relation to biomarker discovery studies and describe how the efficiency of biomarker discovery can be effected by study design choices. We develop a simulated prostate cancer cohort data set and a series of biomarker discovery case-control studies nested within the cohort to illustrate how study design choices can influence biomarker discovery process. Common elements of nested case-control design, incidence density sampling and matching of controls to cases are not typically factored correctly into biomarker discovery analyses, inducing bias in the discovery process. We illustrate how incidence density sampling and matching of controls to cases reduce the apparent specificity of truly valid biomarkers 'discovered' in a nested case-control study. We also propose and demonstrate a new case-control matching protocol, we call 'antimatching', that improves the efficiency of biomarker discovery studies. For a valid, but as yet undiscovered, biomarker(s) disjunctions between correctly designed epidemiologic studies and the practice of biomarker discovery reduce the likelihood that true biomarker(s) will be discovered and increases the false-positive discovery rate. © 2012 The Authors. European Journal of Clinical Investigation © 2012 Stichting European Society for Clinical Investigation Journal Foundation.

Trends in study design and the statistical methods employed in a leading general medicine journal.

PubMed

Gosho, M; Sato, Y; Nagashima, K; Takahashi, S

2018-02-01

Study design and statistical methods have become core components of medical research, and the methodology has become more multifaceted and complicated over time. The study of the comprehensive details and current trends of study design and statistical methods is required to support the future implementation of well-planned clinical studies providing information about evidence-based medicine. Our purpose was to illustrate study design and statistical methods employed in recent medical literature. This was an extension study of Sato et al. (N Engl J Med 2017; 376: 1086-1087), which reviewed 238 articles published in 2015 in the New England Journal of Medicine (NEJM) and briefly summarized the statistical methods employed in NEJM. Using the same database, we performed a new investigation of the detailed trends in study design and individual statistical methods that were not reported in the Sato study. Due to the CONSORT statement, prespecification and justification of sample size are obligatory in planning intervention studies. Although standard survival methods (eg Kaplan-Meier estimator and Cox regression model) were most frequently applied, the Gray test and Fine-Gray proportional hazard model for considering competing risks were sometimes used for a more valid statistical inference. With respect to handling missing data, model-based methods, which are valid for missing-at-random data, were more frequently used than single imputation methods. These methods are not recommended as a primary analysis, but they have been applied in many clinical trials. Group sequential design with interim analyses was one of the standard designs, and novel design, such as adaptive dose selection and sample size re-estimation, was sometimes employed in NEJM. Model-based approaches for handling missing data should replace single imputation methods for primary analysis in the light of the information found in some publications. Use of adaptive design with interim analyses is increasing after the presentation of the FDA guidance for adaptive design. © 2017 John Wiley & Sons Ltd.

New Approach to Concept Feasibility and Design Studies for Astrophysics Missions

NASA Technical Reports Server (NTRS)

Deutsch, M. J.; McLaughlin, W.; Nichols, J.

1998-01-01

JPL has assembled a team of multidisciplinary experts with corporate knowledge of space mission and instrument development. The advanced Concept Design Team, known as Team X, provides interactive design trades including cost as a design parameter, and advanced visualization for pre-Phase A Studies.

Designing clinical trials for amblyopia

PubMed Central

Holmes, Jonathan M.

2015-01-01

Randomized clinical trial (RCT) study design leads to one of the highest levels of evidence, and is a preferred study design over cohort studies, because randomization reduces bias and maximizes the chance that even unknown confounding factors will be balanced between treatment groups. Recent randomized clinical trials and observational studies in amblyopia can be taken together to formulate an evidence-based approach to amblyopia treatment, which is presented in this review. When designing future clinical studies of amblyopia treatment, issues such as regression to the mean, sample size and trial duration must be considered, since each may impact study results and conclusions. PMID:25752747

Simple uncertainty propagation for early design phase aircraft sizing

NASA Astrophysics Data System (ADS)

Lenz, Annelise

Many designers and systems analysts are aware of the uncertainty inherent in their aircraft sizing studies; however, few incorporate methods to address and quantify this uncertainty. Many aircraft design studies use semi-empirical predictors based on a historical database and contain uncertainty -- a portion of which can be measured and quantified. In cases where historical information is not available, surrogate models built from higher-fidelity analyses often provide predictors for design studies where the computational cost of directly using the high-fidelity analyses is prohibitive. These surrogate models contain uncertainty, some of which is quantifiable. However, rather than quantifying this uncertainty, many designers merely include a safety factor or design margin in the constraints to account for the variability between the predicted and actual results. This can become problematic if a designer does not estimate the amount of variability correctly, which then can result in either an "over-designed" or "under-designed" aircraft. "Under-designed" and some "over-designed" aircraft will likely require design changes late in the process and will ultimately require more time and money to create; other "over-designed" aircraft concepts may not require design changes, but could end up being more costly than necessary. Including and propagating uncertainty early in the design phase so designers can quantify some of the errors in the predictors could help mitigate the extent of this additional cost. The method proposed here seeks to provide a systematic approach for characterizing a portion of the uncertainties that designers are aware of and propagating it throughout the design process in a procedure that is easy to understand and implement. Using Monte Carlo simulations that sample from quantified distributions will allow a systems analyst to use a carpet plot-like approach to make statements like: "The aircraft is 'P'% likely to weigh 'X' lbs or less, given the uncertainties quantified" without requiring the systems analyst to have substantial knowledge of probabilistic methods. A semi-empirical sizing study of a small single-engine aircraft serves as an example of an initial version of this simple uncertainty propagation. The same approach is also applied to a variable-fidelity concept study using a NASA-developed transonic Hybrid Wing Body aircraft.

PopED lite: An optimal design software for preclinical pharmacokinetic and pharmacodynamic studies.

PubMed

Aoki, Yasunori; Sundqvist, Monika; Hooker, Andrew C; Gennemark, Peter

2016-04-01

Optimal experimental design approaches are seldom used in preclinical drug discovery. The objective is to develop an optimal design software tool specifically designed for preclinical applications in order to increase the efficiency of drug discovery in vivo studies. Several realistic experimental design case studies were collected and many preclinical experimental teams were consulted to determine the design goal of the software tool. The tool obtains an optimized experimental design by solving a constrained optimization problem, where each experimental design is evaluated using some function of the Fisher Information Matrix. The software was implemented in C++ using the Qt framework to assure a responsive user-software interaction through a rich graphical user interface, and at the same time, achieving the desired computational speed. In addition, a discrete global optimization algorithm was developed and implemented. The software design goals were simplicity, speed and intuition. Based on these design goals, we have developed the publicly available software PopED lite (http://www.bluetree.me/PopED_lite). Optimization computation was on average, over 14 test problems, 30 times faster in PopED lite compared to an already existing optimal design software tool. PopED lite is now used in real drug discovery projects and a few of these case studies are presented in this paper. PopED lite is designed to be simple, fast and intuitive. Simple, to give many users access to basic optimal design calculations. Fast, to fit a short design-execution cycle and allow interactive experimental design (test one design, discuss proposed design, test another design, etc). Intuitive, so that the input to and output from the software tool can easily be understood by users without knowledge of the theory of optimal design. In this way, PopED lite is highly useful in practice and complements existing tools. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

30 CFR 556.82 - Environmental studies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... extent practicable, be designed to predict environmental impacts of pollutants introduced into the... a manner designed to provide information which can be compared with the results of studies conducted... quality and productivity of such environments, to establish trends in the areas studies, and to design...

30 CFR 556.82 - Environmental studies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... extent practicable, be designed to predict environmental impacts of pollutants introduced into the... a manner designed to provide information which can be compared with the results of studies conducted... quality and productivity of such environments, to establish trends in the areas studies, and to design...

30 CFR 556.82 - Environmental studies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... extent practicable, be designed to predict environmental impacts of pollutants introduced into the... a manner designed to provide information which can be compared with the results of studies conducted... quality and productivity of such environments, to establish trends in the areas studies, and to design...

Railroad classification yard design methodology study : East Deerfield Yard, a case study

DOT National Transportation Integrated Search

1980-02-01

This interim report documents the application of a railroad classification yard design methodology to Boston and Maine's East Deerfield Yard Rehabiliation. This case study effort represents Phase 2 of a larger effort to develop a yard design methodol...

Experimental design methods for bioengineering applications.

PubMed

Keskin Gündoğdu, Tuğba; Deniz, İrem; Çalışkan, Gülizar; Şahin, Erdem Sefa; Azbar, Nuri

2016-01-01

Experimental design is a form of process analysis in which certain factors are selected to obtain the desired responses of interest. It may also be used for the determination of the effects of various independent factors on a dependent factor. The bioengineering discipline includes many different areas of scientific interest, and each study area is affected and governed by many different factors. Briefly analyzing the important factors and selecting an experimental design for optimization are very effective tools for the design of any bioprocess under question. This review summarizes experimental design methods that can be used to investigate various factors relating to bioengineering processes. The experimental methods generally used in bioengineering are as follows: full factorial design, fractional factorial design, Plackett-Burman design, Taguchi design, Box-Behnken design and central composite design. These design methods are briefly introduced, and then the application of these design methods to study different bioengineering processes is analyzed.

The importance of replication in wildlife research

USGS Publications Warehouse

Johnson, D.H.

2002-01-01

Wildlife ecology and management studies have been widely criticized for deficiencies in design or analysis. Manipulative experiments--with controls, randomization, and replication in space and time--provide powerful ways of learning about natural systems and establishing causal relationships, but such studies are rare in our field. Observational studies and sample surveys are more common; they also require appropriate design and analysis. More important than the design and analysis of individual studies is metareplication: replication of entire studies. Similar conclusions obtained from studies of the same phenomenon conducted under widely differing conditions will give us greater confidence in the generality of those findings than would any single study, however well designed and executed.

Conducting pilot and feasibility studies.

PubMed

Cope, Diane G

2015-03-01

Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
.

Behavioral headache research: methodologic considerations and research design alternatives.

PubMed

Hursey, Karl G; Rains, Jeanetta C; Penzien, Donald B; Nash, Justin M; Nicholson, Robert A

2005-05-01

Behavioral headache treatments have garnered solid empirical support in recent years, but there is substantial opportunity to strengthen the next generation of studies with improved methods and consistency across studies. Recently, Guidelines for Trials of Behavioral Treatments for Recurrent Headache were published to facilitate the production of high-quality research. The present article compliments the guidelines with a discussion of methodologic and research design considerations. Since there is no research design that is applicable in every situation, selecting an appropriate research design is fundamental to producing meaningful results. Investigators in behavioral headache and other areas of research consider the developmental phase of the research, the principle objectives of the project, and the sources of error or alternative interpretations in selecting a design. Phases of clinical trials typically include pilot studies, efficacy studies, and effectiveness studies. These trials may be categorized as primarily pragmatic or explanatory. The most appropriate research designs for these different phases and different objectives vary on such characteristics as sample size and assignment to condition, types of control conditions, periods or frequency of measurement, and the dimensions along which comparisons are made. A research design also must fit within constraints on available resources. There are a large number of potential research designs that can be used and considering these characteristics allows selection of appropriate research designs.

The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 1

NASA Technical Reports Server (NTRS)

Onwubiko, Chinyere; Onyebueke, Landon

1996-01-01

This program report is the final report covering all the work done on this project. The goal of this project is technology transfer of methodologies to improve design process. The specific objectives are: 1. To learn and understand the Probabilistic design analysis using NESSUS. 2. To assign Design Projects to either undergraduate or graduate students on the application of NESSUS. 3. To integrate the application of NESSUS into some selected senior level courses in Civil and Mechanical Engineering curricula. 4. To develop courseware in Probabilistic Design methodology to be included in a graduate level Design Methodology course. 5. To study the relationship between the Probabilistic design methodology and Axiomatic design methodology.

Off-design performance analysis of MHD generator channels

NASA Technical Reports Server (NTRS)

Wilson, D. R.; Williams, T. S.

1980-01-01

A computer code for performing parametric design point calculations, and evaluating the off-design performance of MHD generators has been developed. The program is capable of analyzing Faraday, Hall, and DCW channels, including the effect of electrical shorting in the gas boundary layers and coal slag layers. Direct integration of the electrode voltage drops is included. The program can be run in either the design or off-design mode. Details of the computer code, together with results of a study of the design and off-design performance of the proposed ETF MHD generator are presented. Design point variations of pre-heat and stoichiometry were analyzed. The off-design study included variations in mass flow rate and oxygen enrichment.

Inlet design for high-speed propfans

NASA Technical Reports Server (NTRS)

Little, B. H., Jr.; Hinson, B. L.

1982-01-01

A two-part study was performed to design inlets for high-speed propfan installation. The first part was a parametric study to select promising inlet concepts. A wide range of inlet geometries was examined and evaluated - primarily on the basis of cruise thrust and fuel burn performance. Two inlet concepts were than chosen for more detailed design studies - one apropriate to offset engine/gearbox arrangements and the other to in-line arrangements. In the second part of this study, inlet design points were chosen to optimize the net installed thrust, and detailed design of the two inlet configurations was performed. An analytical methodology was developed to account for propfan slipstream effects, transonic flow efects, and three-dimensional geometry effects. Using this methodology, low drag cowls were designed for the two inlets.

Design elements in implementation research: a structured review of child welfare and child mental health studies.

PubMed

Landsverk, John; Brown, C Hendricks; Rolls Reutz, Jennifer; Palinkas, Lawrence; Horwitz, Sarah McCue

2011-01-01

Implementation science is an emerging field of research with considerable penetration in physical medicine and less in the fields of mental health and social services. There remains a lack of consensus on methodological approaches to the study of implementation processes and tests of implementation strategies. This paper addresses the need for methods development through a structured review that describes design elements in nine studies testing implementation strategies for evidence-based interventions addressing mental health problems of children in child welfare and child mental health settings. Randomized trial designs were dominant with considerable use of mixed method designs in the nine studies published since 2005. The findings are discussed in reference to the limitations of randomized designs in implementation science and the potential for use of alternative designs.

Multimedia Resources Designed to Support Learning from Written Proofs: An Eye-Movement Study

ERIC Educational Resources Information Center

Roy, Somali; Inglis, Matthew; Alcock, Lara

2017-01-01

This paper presents two studies of an intervention designed to help undergraduates comprehend mathematical proofs. The intervention used multimedia resources that presented proofs with audio commentary and visual animations designed to focus attention on logical relationships. In study 1, students studied an e-Proof or a standard written proof and…

The practical application of adaptive study design in early phase clinical trials: a retrospective analysis of time savings.

PubMed

Lorch, U; Berelowitz, K; Ozen, C; Naseem, A; Akuffo, E; Taubel, J

2012-05-01

The interest in adaptive study design is evident from the growing amount of clinical research employing this model in the mid to later stages of medicines development. Little has been published on the practical application and merits of adaptive study design in early phase clinical research. This paper describes a retrospective analysis performed on a sample of 29 industry lead adaptive early phase studies commencing between 1 January 2006 and 31 December 2010 in a clinical trials unit in London, England. All studies containing at least one adaptive feature in the original protocol were included in the analysis. The scope of the analysis was to assess whether the use of adaptive study designs provided tangible benefits over the use of conventional study designs using time savings as the main measure. We conclude that the use of adaptive study design saves time in early phase research programs. This is achieved by abolishing the need for substantial amendments or by mitigating their impact on timelines and by using adaptive scheduling efficiencies.

The incident user design in comparative effectiveness research.

PubMed

Johnson, Eric S; Bartman, Barbara A; Briesacher, Becky A; Fleming, Neil S; Gerhard, Tobias; Kornegay, Cynthia J; Nourjah, Parivash; Sauer, Brian; Schumock, Glen T; Sedrakyan, Art; Stürmer, Til; West, Suzanne L; Schneeweiss, Sebastian

2013-01-01

Comparative effectiveness research includes cohort studies and registries of interventions. When investigators design such studies, how important is it to follow patients from the day they initiated treatment with the study interventions? Our article considers this question and related issues to start a dialogue on the value of the incident user design in comparative effectiveness research. By incident user design, we mean a study that sets the cohort's inception date according to patients' new use of an intervention. In contrast, most epidemiologic studies enroll patients who were currently or recently using an intervention when follow-up began. We take the incident user design as a reasonable default strategy because it reduces biases that can impact non-randomized studies, especially when investigators use healthcare databases. We review case studies where investigators have explored the consequences of designing a cohort study by restricting to incident users, but most of the discussion has been informed by expert opinion, not by systematic evidence. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.

Considerations of study design.

PubMed

Koretz, Ronald L

2007-12-01

Research projects attempt to answer specific questions. The particular study design that is selected will depend in large measure on the nature of the question and the time and resources available. There are 5 common categories of clinical questions; they relate to etiology, prognosis, utility of diagnostic tests, efficacy of proposed interventions, and cost of treatment in specific disease states. A number of study designs can be used. Case reports serve to memorialize unusual or novel aspects of diseases. Retrospective case series are useful for defining natural history. Case-control studies are used by epidemiologists to elucidate potential etiologies of diseases. Prospective cohort studies can be used to assess natural history or to assess potential disease etiologies. Controlled trials are designed to assess the efficacy of therapeutic interventions. Studies that define the sensitivity and specificity of diagnostic tests can be used to assess the utility of those tests. Economic analyses estimate the costs that particular diseases or therapies will require. Each of these study designs has limitations; with the exception of high-quality randomized trials, none of these study designs can establish a causative relationship between putative etiologic (or therapeutic) factors and disease (outcomes).

Who Gets Designated a Terrorist and Why?

ERIC Educational Resources Information Center

Beck, Colin J.; Miner, Emily

2013-01-01

This study examines formal terrorism designations by governments through the lens of organization studies research on categorization processes. It is argued that designations hinge on markers from the organizational profile of a militant group. Using cross-sectional data on militant organizations and designations by the United States, the United…

Towards Design Guidelines for Work Related Learning Arrangements

ERIC Educational Resources Information Center

Lappia, Josephine H.

2011-01-01

Purpose: The purpose of the study is to produce design guidelines based on insights from both practice and theory that will enable teachers and educational developers to execute the design, implementation and evaluation of their work-related learning arrangements with stakeholders involved. Design/methodology/approach: The first study reported in…

Scaffolding Preservice Teachers' WebQuest Design: A Qualitative Study

ERIC Educational Resources Information Center

Wang, Feng; Hannafin, Michael J.

2009-01-01

This study examined how participating preservice teachers reported their perceptions and use of different scaffolds provided to support their WebQuest design. Sixteen preservice teachers participated in a succession of course activities designed to guide WebQuest design and development. Results indicated that while participants followed, adapted,…

Understanding Decision Making in Teachers' Curriculum Design Approaches

ERIC Educational Resources Information Center

Boschman, Ferry; McKenney, Susan; Voogt, Joke

2014-01-01

The goal of this study was to reach a better understanding of the intuitive decisions teachers make when designing a technology-rich learning environment. A multiple case-study design was employed to examine what kinds of factors (external priorities, existing orientations or practical concerns) influence design interactions of teams of…

Inertial Fusion Energy reactor design studies: Prometheus-L, Prometheus-H. Volume 2, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waganer, L.M.; Driemeyer, D.E.; Lee, V.D.

1992-03-01

This report contains a review of design studies for Inertial Confinement reactor. This second of three volumes discussions is some detail the following: Objectives, requirements, and assumptions; rationale for design option selection; key technical issues and R&D requirements; and conceptual design selection and description.

Optimal designs for prediction studies of whiplash.

PubMed

Kamper, Steven J; Hancock, Mark J; Maher, Christopher G

2011-12-01

Commentary. To provide guidance for the design and interpretation of predictive studies of whiplash associated disorders (WAD). Numerous studies have sought to define and explain the clinical course and response to treatment of people with WAD. Design of these studies is often suboptimal, which can lead to biased findings and issues with interpreting the results. Literature review and commentary. Predictive studies can be grouped into four broad categories; studies of symptomatic course, studies that aim to identify factors that predict outcome, studies that aim to isolate variables that are causally responsible for outcome, and studies that aim to identify patients who respond best to particular treatments. Although the specific research question will determine the optimal methods, there are a number of generic features that should be incorporated into design of such studies. The aim of these features is to minimize bias, generate adequately precise prognostic estimates, and ensure generalizability of the findings. This paper provides a summary of important considerations in the design, conduct, and reporting of prediction studies in the field of whiplash.

The Misconception of Case-Control Studies in the Plastic Surgery Literature: A Literature Audit.

PubMed

Hatchell, Alexandra C; Farrokhyar, Forough; Choi, Matthew

2017-06-01

Case-control study designs are commonly used. However, many published case-control studies are not true case-controls and are in fact mislabeled. The purpose of this study was to identify all case-control studies published in the top three plastic surgery journals over the past 10 years, assess which were truly case-control studies, clarify the actual design of the articles, and address common misconceptions. MEDLINE, Embase, and Web of Science databases were searched for case-control studies in the three highest-impact factor plastic surgery journals (2005 to 2015). Two independent reviewers screened the resulting titles, abstracts, and methods, if applicable, to identify articles labeled as case-control studies. These articles were appraised and classified as true case-control studies or non-case-control studies. The authors found 28 articles labeled as case-control studies. However, only six of these articles (21 percent) were truly case-control designs. Of the 22 incorrectly labeled studies, one (5 percent) was a randomized controlled trial, three (14 percent) were nonrandomized trials, two (9 percent) were prospective comparative cohort designs, 14 (64 percent) were retrospective comparative cohort designs, and two (9 percent) were cross-sectional designs. The mislabeling was worse in recent years, despite increases in evidence-based medicine awareness. The majority of published case-control studies are not in fact case-control studies. This misunderstanding is worsening with time. Most of these studies are actually comparative cohort designs. However, some studies are truly clinical trials and thus a higher level of evidence than originally proposed.

Playable Stories: Making Programming and 3D Role-Playing Game Design Personally and Socially Relevant

ERIC Educational Resources Information Center

Ingram-Goble, Adam

2013-01-01

This is an exploratory design study of a novel system for learning programming and 3D role-playing game design as tools for social change. This study was conducted at two sites. Participants in the study were ages 9-14 and worked for up to 15 hours with the platform to learn how to program and design video games with personally or socially…

Numerical aerodynamic simulation facility preliminary study, volume 2 and appendices

NASA Technical Reports Server (NTRS)

1977-01-01

Data to support results obtained in technology assessment studies are presented. Objectives, starting points, and future study tasks are outlined. Key design issues discussed in appendices include: data allocation, transposition network design, fault tolerance and trustworthiness, logic design, processing element of existing components, number of processors, the host system, alternate data base memory designs, number representation, fast div 521 instruction, architectures, and lockstep array versus synchronizable array machine comparison.

An Empirical Study on Operator Interface Design for Handheld Devices to Control Micro Aerial Vehicles

DTIC Science & Technology

2010-10-01

An Empirical Study on Operator Interface Design for Handheld Devices to Control Micro Aerial Vehicles Ming Hou...Report DRDC Toronto TR 2010-075 October 2010 An Empirical Study on Operator Interface Design for Handheld Devices to...drives the need for a small and light controller which will not hinder a soldier carrying it. This requirement brings an issue of designing an

Preliminary design study of advanced multistage axial flow core compressors

NASA Technical Reports Server (NTRS)

Wisler, D. C.; Koch, C. C.; Smith, L. H., Jr.

1977-01-01

A preliminary design study was conducted to identify an advanced core compressor for use in new high-bypass-ratio turbofan engines to be introduced into commercial service in the 1980's. An evaluation of anticipated compressor and related component 1985 state-of-the-art technology was conducted. A parametric screening study covering a large number of compressor designs was conducted to determine the influence of the major compressor design features on efficiency, weight, cost, blade life, aircraft direct operating cost, and fuel usage. The trends observed in the parametric screening study were used to develop three high-efficiency, high-economic-payoff compressor designs. These three compressors were studied in greater detail to better evaluate their aerodynamic and mechanical feasibility.

A framework for reporting on human factor/usability studies of health information technologies.

PubMed

Peute, Linda W; Driest, Keiko F; Marcilly, Romaric; Bras Da Costa, Sabrina; Beuscart-Zephir, Marie-Catherine; Jaspers, Monique W M

2013-01-01

Increasingly, studies are being published on the potential negative effect of introducing poor designed Health Information Technology (HIT) into clinical settings, relating to technology-induced errors and adverse events. Academic research on HIT design and evaluation is an extremely important source of information in providing new insights into factors contributing to successful system (re)design efforts, system user-friendliness and usability issues and safety critical aspects of HIT design. However, these studies have been inconsistent and incomprehensive in their reporting, complicating the appraisal of outcomes, generalizability of study findings, meta-analysis and harmonization of the available evidence. To improve identification of type of use errors and safety related issues regarding design and implementation of HIT, consensus on issues to be reported on in scientific publications is a necessary step forward. This study presents the first approach to a framework providing a set of principles to follow for comprehensive and unambiguous reporting of HIT design and usability evaluation studies with the objective to reduce variation, improve on the publication reporting quality and proper indexation of these studies. This framework may be helpful in expanding the knowledge base not only concerning the application of Human Factors (HF)/Usability studies of HIT but also improve the knowledge base of how to (re)design and implement effective, efficient and safe HIT.

Operator Station Design System - A computer aided design approach to work station layout

NASA Technical Reports Server (NTRS)

Lewis, J. L.

1979-01-01

The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

A survey of student opinions on ethical design standards in Taiwan.

PubMed

Lee, Yingying; You, Manlai; Yang, Ming-Ying

2015-04-01

Design ethics has been offered as a course in undergraduate design programs in Taiwan for over a decade, but research on teaching design ethics and the results of teaching these courses is scant. We conducted two tests to examine (1) the effect of an ethics course, and (2) the differences among the effects of design department, gender, and study year on student opinions regarding ethical design standards (EDSs) at the National Yunlin University of Science and Technology (YunTech) in Taiwan. The participants comprised 934 undergraduates (660 women and 274 men) from the five design departments at YunTech's College of Design from Years 1-4. The results confirmed the effect of an ethics course on student EDS opinions. In addition, we observed significant variations among students according to design departments, suggesting that the characteristics of the design departments also affected students' EDS opinions. The results indicated that gender did not significantly affect design students' EDS opinions; however, students in their early years of study produced higher scores than those in their advanced years of study did, based on the six EDS opinions. The implications of these results for teaching design ethics and future research are discussed in this paper.

Cost model relationships between textile manufacturing processes and design details for transport fuselage elements

NASA Technical Reports Server (NTRS)

Metschan, Stephen L.; Wilden, Kurtis S.; Sharpless, Garrett C.; Andelman, Rich M.

1993-01-01

Textile manufacturing processes offer potential cost and weight advantages over traditional composite materials and processes for transport fuselage elements. In the current study, design cost modeling relationships between textile processes and element design details were developed. Such relationships are expected to help future aircraft designers to make timely decisions on the effect of design details and overall configurations on textile fabrication costs. The fundamental advantage of a design cost model is to insure that the element design is cost effective for the intended process. Trade studies on the effects of processing parameters also help to optimize the manufacturing steps for a particular structural element. Two methods of analyzing design detail/process cost relationships developed for the design cost model were pursued in the current study. The first makes use of existing databases and alternative cost modeling methods (e.g. detailed estimating). The second compares design cost model predictions with data collected during the fabrication of seven foot circumferential frames for ATCAS crown test panels. The process used in this case involves 2D dry braiding and resin transfer molding of curved 'J' cross section frame members having design details characteristic of the baseline ATCAS crown design.

Graphical Tests for Power Comparison of Competing Designs.

PubMed

Hofmann, H; Follett, L; Majumder, M; Cook, D

2012-12-01

Lineups have been established as tools for visual testing similar to standard statistical inference tests, allowing us to evaluate the validity of graphical findings in an objective manner. In simulation studies lineups have been shown as being efficient: the power of visual tests is comparable to classical tests while being much less stringent in terms of distributional assumptions made. This makes lineups versatile, yet powerful, tools in situations where conditions for regular statistical tests are not or cannot be met. In this paper we introduce lineups as a tool for evaluating the power of competing graphical designs. We highlight some of the theoretical properties and then show results from two studies evaluating competing designs: both studies are designed to go to the limits of our perceptual abilities to highlight differences between designs. We use both accuracy and speed of evaluation as measures of a successful design. The first study compares the choice of coordinate system: polar versus cartesian coordinates. The results show strong support in favor of cartesian coordinates in finding fast and accurate answers to spotting patterns. The second study is aimed at finding shift differences between distributions. Both studies are motivated by data problems that we have recently encountered, and explore using simulated data to evaluate the plot designs under controlled conditions. Amazon Mechanical Turk (MTurk) is used to conduct the studies. The lineups provide an effective mechanism for objectively evaluating plot designs.

Quasi-experimental study designs series-paper 9: collecting data from quasi-experimental studies.

PubMed

Aloe, Ariel M; Becker, Betsy Jane; Duvendack, Maren; Valentine, Jeffrey C; Shemilt, Ian; Waddington, Hugh

2017-09-01

To identify variables that must be coded when synthesizing primary studies that use quasi-experimental designs. All quasi-experimental (QE) designs. When designing a systematic review of QE studies, potential sources of heterogeneity-both theory-based and methodological-must be identified. We outline key components of inclusion criteria for syntheses of quasi-experimental studies. We provide recommendations for coding content-relevant and methodological variables and outlined the distinction between bivariate effect sizes and partial (i.e., adjusted) effect sizes. Designs used and controls used are viewed as of greatest importance. Potential sources of bias and confounding are also addressed. Careful consideration must be given to inclusion criteria and the coding of theoretical and methodological variables during the design phase of a synthesis of quasi-experimental studies. The success of the meta-regression analysis relies on the data available to the meta-analyst. Omission of critical moderator variables (i.e., effect modifiers) will undermine the conclusions of a meta-analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

Mixing modes in a population-based interview survey: comparison of a sequential and a concurrent mixed-mode design for public health research.

PubMed

Mauz, Elvira; von der Lippe, Elena; Allen, Jennifer; Schilling, Ralph; Müters, Stephan; Hoebel, Jens; Schmich, Patrick; Wetzstein, Matthias; Kamtsiuris, Panagiotis; Lange, Cornelia

2018-01-01

Population-based surveys currently face the problem of decreasing response rates. Mixed-mode designs are now being implemented more often to account for this, to improve sample composition and to reduce overall costs. This study examines whether a concurrent or sequential mixed-mode design achieves better results on a number of indicators of survey quality. Data were obtained from a population-based health interview survey of adults in Germany that was conducted as a methodological pilot study as part of the German Health Update (GEDA). Participants were randomly allocated to one of two surveys; each of the surveys had a different design. In the concurrent mixed-mode design ( n  = 617) two types of self-administered questionnaires (SAQ-Web and SAQ-Paper) and computer-assisted telephone interviewing were offered simultaneously to the respondents along with the invitation to participate. In the sequential mixed-mode design ( n  = 561), SAQ-Web was initially provided, followed by SAQ-Paper, with an option for a telephone interview being sent out together with the reminders at a later date. Finally, this study compared the response rates, sample composition, health indicators, item non-response, the scope of fieldwork and the costs of both designs. No systematic differences were identified between the two mixed-mode designs in terms of response rates, the socio-demographic characteristics of the achieved samples, or the prevalence rates of the health indicators under study. The sequential design gained a higher rate of online respondents. Very few telephone interviews were conducted for either design. With regard to data quality, the sequential design (which had more online respondents) showed less item non-response. There were minor differences between the designs in terms of their costs. Postage and printing costs were lower in the concurrent design, but labour costs were lower in the sequential design. No differences in health indicators were found between the two designs. Modelling these results for higher response rates and larger net sample sizes indicated that the sequential design was more cost and time-effective. This study contributes to the research available on implementing mixed-mode designs as part of public health surveys. Our findings show that SAQ-Paper and SAQ-Web questionnaires can be combined effectively. Sequential mixed-mode designs with higher rates of online respondents may be of greater benefit to studies with larger net sample sizes than concurrent mixed-mode designs.

Variable-Speed Power-Turbine for the Large Civil Tilt Rotor

NASA Technical Reports Server (NTRS)

Suchezky, Mark; Cruzen, G. Scott

2012-01-01

Turbine design concepts were studied for application to a large civil tiltrotor transport aircraft. The concepts addressed the need for high turbine efficiency across the broad 2:1 turbine operating speed range representative of the notional mission for the aircraft. The study focused on tailoring basic turbine aerodynamic design design parameters to avoid the need for complex, heavy, and expensive variable geometry features. The results of the study showed that good turbine performance can be achieved across the design speed range if the design focuses on tailoring the aerodynamics for good tolerance to large swings in incidence, as opposed to optimizing for best performance at the long range cruise design point. A rig design configuration and program plan are suggested for a dedicated experiment to validate the proposed approach.

Methodology Series Module 3: Cross-sectional Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Methodology Series Module 3: Cross-sectional Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design. PMID:27293245

A case study on topology optimized design for additive manufacturing

NASA Astrophysics Data System (ADS)

Gebisa, A. W.; Lemu, H. G.

2017-12-01

Topology optimization is an optimization method that employs mathematical tools to optimize material distribution in a part to be designed. Earlier developments of topology optimization considered conventional manufacturing techniques that have limitations in producing complex geometries. This has hindered the topology optimization efforts not to fully be realized. With the emergence of additive manufacturing (AM) technologies, the technology that builds a part layer upon a layer directly from three dimensional (3D) model data of the part, however, producing complex shape geometry is no longer an issue. Realization of topology optimization through AM provides full design freedom for the design engineers. The article focuses on topologically optimized design approach for additive manufacturing with a case study on lightweight design of jet engine bracket. The study result shows that topology optimization is a powerful design technique to reduce the weight of a product while maintaining the design requirements if additive manufacturing is considered.

Study of metallic structural design concepts for an arrow wing supersonic cruise configuration

NASA Technical Reports Server (NTRS)

Turner, M. J.; Grande, D. L.

1977-01-01

A structural design study was made, to assess the relative merits of various metallic structural concepts and materials for an advanced supersonic aircraft cruising at Mach 2.7. Preliminary studies were made to ensure compliance of the configuration with general design criteria, integrate the propulsion system with the airframe, select structural concepts and materials, and define an efficient structural arrangement. An advanced computerized structural design system was used, in conjunction with a relatively large, complex finite element model, for detailed analysis and sizing of structural members to satisfy strength and flutter criteria. A baseline aircraft design was developed for assessment of current technology. Criteria, analysis methods, and results are presented. The effect on design methods of using the computerized structural design system was appraised, and recommendations are presented concerning further development of design tools, development of materials and structural concepts, and research on basic technology.

Statistical inferences for data from studies conducted with an aggregated multivariate outcome-dependent sample design

PubMed Central

Lu, Tsui-Shan; Longnecker, Matthew P.; Zhou, Haibo

2016-01-01

Outcome-dependent sampling (ODS) scheme is a cost-effective sampling scheme where one observes the exposure with a probability that depends on the outcome. The well-known such design is the case-control design for binary response, the case-cohort design for the failure time data and the general ODS design for a continuous response. While substantial work has been done for the univariate response case, statistical inference and design for the ODS with multivariate cases remain under-developed. Motivated by the need in biological studies for taking the advantage of the available responses for subjects in a cluster, we propose a multivariate outcome dependent sampling (Multivariate-ODS) design that is based on a general selection of the continuous responses within a cluster. The proposed inference procedure for the Multivariate-ODS design is semiparametric where all the underlying distributions of covariates are modeled nonparametrically using the empirical likelihood methods. We show that the proposed estimator is consistent and developed the asymptotically normality properties. Simulation studies show that the proposed estimator is more efficient than the estimator obtained using only the simple-random-sample portion of the Multivariate-ODS or the estimator from a simple random sample with the same sample size. The Multivariate-ODS design together with the proposed estimator provides an approach to further improve study efficiency for a given fixed study budget. We illustrate the proposed design and estimator with an analysis of association of PCB exposure to hearing loss in children born to the Collaborative Perinatal Study. PMID:27966260

Fluid design studies of integrated modular engine system

NASA Technical Reports Server (NTRS)

Frankenfield, Bruce; Carek, Jerry

1993-01-01

A study was performed to develop a fluid system design and show the feasibility of constructing an integrated modular engine (IME) configuration, using an expander cycle engine. The primary design goal of the IME configuration was to improve the propulsion system reliability. The IME fluid system was designed as a single fault tolerant system, while minimizing the required fluid components. This study addresses the design of the high pressure manifolds, turbopumps and thrust chambers for the IME configuration. A physical layout drawing was made, which located each of the fluid system components, manifolds and thrust chambers. Finally, a comparison was made between the fluid system designs of an IME system and a non-network (clustered) engine system.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

NASA Technical Reports Server (NTRS)

Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

1973-01-01

The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

Total-System Approach To Design And Analysis Of Structures

NASA Technical Reports Server (NTRS)

Verderaime, V.

1995-01-01

Paper presents overview and study of, and comprehensive approach to, multidisciplinary engineering design and analysis of structures. Emphasizes issues related to design of semistatic structures in environments in which spacecraft launched, underlying concepts applicable to other structures within unique terrestrial, marine, or flight environments. Purpose of study to understand interactions among traditionally separate engineering design disciplines with view toward optimizing not only structure but also overall design process.

Designing SoTL Studies--Part II: Practicality

ERIC Educational Resources Information Center

Bartsch, Robert A.

2013-01-01

This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

Osiris and SOMBRERO inertial confinement fusion power plant designs. Volume 2, Designs, assessments, and comparisons, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W.R.; Bieri, R.L.; Monsler, M.J.

1992-03-01

The primary objective of the of the IFE Reactor Design Studies was to provide the Office of Fusion Energy with an evaluation of the potential of inertial fusion for electric power production. The term reactor studies is somewhat of a misnomer since these studies included the conceptual design and analysis of all aspects of the IFE power plants: the chambers, heat transport and power conversion systems, other balance of plant facilities, target systems (including the target production, injection, and tracking systems), and the two drivers. The scope of the IFE Reactor Design Studies was quite ambitious. The majority of ourmore » effort was spent on the conceptual design of two IFE electric power plants, one using an induction linac heavy ion beam (HIB) driver and the other using a Krypton Fluoride (KrF) laser driver. After the two point designs were developed, they were assessed in terms of their (1) environmental and safety aspects; (2) reliability, availability, and maintainability; (3) technical issues and technology development requirements; and (4) economics. Finally, we compared the design features and the results of the assessments for the two designs.« less

Study on Product Innovative Design Process Driven by Ideal Solution

NASA Astrophysics Data System (ADS)

Zhang, Fuying; Lu, Ximei; Wang, Ping; Liu, Hui

Product innovative design in companies today relies heavily on individual members’ experience and creative ideation as well as their skills of integrating creativity and innovation tools with design methods agilely. Creative ideation and inventive ideas generation are two crucial stages in product innovative design process. Ideal solution is the desire final ideas for given problem, and the striving reaching target for product design. In this paper, a product innovative design process driven by ideal solution is proposed. This design process encourages designers to overcome their psychological inertia, to foster creativity in a systematic way for acquiring breakthrough creative and innovative solutions in a reducing sphere of solution-seeking, and results in effective product innovative design rapidly. A case study example is also presented to illustrate the effectiveness of the proposed design process.

TPF-I Emma X-Array: 2007 Design Team Study

NASA Technical Reports Server (NTRS)

Martin, Stefan R.; Rodriguez, Jose; Scharf, Dan; Smith, Jim; McKinstry, David; Wirz, Richie; Purcell, George; Wayne, Len; Scherr, Larry; Mennesson, Bertrand;

Design vs. Content: A Study of Adolescent Girls' Website Design Preferences

ERIC Educational Resources Information Center

Agosto, Denise E.

2004-01-01

This study considered the utility of gender schema theory in examining girls' website design preferences. It built on a previous study which identified eight website evaluation criteria related to biological sex: collaboration, social connectivity, flexibility, motility, contextuality, personal identification, inclusion, and graphic/multimedia…

A Discourse on Human Systems Integration

DTIC Science & Technology

2010-09-01

criterion for one of the study tasks. 2. Research Design This was a mixed methods study. The first-phase quantitative portion of the study...used a quasi-experimental, posttest-only with nonequivalent groups design . The independent variables were defined as follows: • The categorical... Research Design ...............................................................................287 3. Instruments

Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

ERIC Educational Resources Information Center

Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

2018-01-01

This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

Impact of Design Trade Studies on System Human Resources.

ERIC Educational Resources Information Center

Whalen, Gary V.; Askren, William B.

This study focused on two objectives. The first objective was to identify and classify the characteristics of conceptual design trade studies that have high potential impact on human resource requirements of Air Force weapon systems. The approach used was a case history review and analysis of 129 F-15 aircraft design trade studies. The analysis…

Effectiveness of Facebook Based Learning to Enhance Creativity among Islamic Studies Students by Employing Isman Instructional Design Model

ERIC Educational Resources Information Center

Alias, Norlidah; Siraj, Saedah; Daud, Mohd Khairul Azman Md; Hussin, Zaharah

2013-01-01

The study examines the effectiveness of Facebook based learning to enhance creativity among Islamic Studies students in the secondary educational setting in Malaysia. It describes the design process by employing the Isman Instructional Design Model. A quantitative study was carried out using experimental method and background survey. The…

A Preliminary Study on Gender Differences in Studying Systems Analysis and Design

ERIC Educational Resources Information Center

Lee, Fion S. L.; Wong, Kelvin C. K.

2017-01-01

Systems analysis and design is a crucial task in system development and is included in a typical information systems programme as a core course. This paper presented a preliminary study on gender differences in studying a systems analysis and design course of an undergraduate programme. Results indicated that male students outperformed female…

LIFESPAN: A tool for the computer-aided design of longitudinal studies

PubMed Central

Brandmaier, Andreas M.; von Oertzen, Timo; Ghisletta, Paolo; Hertzog, Christopher; Lindenberger, Ulman

2015-01-01

Researchers planning a longitudinal study typically search, more or less informally, a multivariate space of possible study designs that include dimensions such as the hypothesized true variance in change, indicator reliability, the number and spacing of measurement occasions, total study time, and sample size. The main search goal is to select a research design that best addresses the guiding questions and hypotheses of the planned study while heeding applicable external conditions and constraints, including time, money, feasibility, and ethical considerations. Because longitudinal study selection ultimately requires optimization under constraints, it is amenable to the general operating principles of optimization in computer-aided design. Based on power equivalence theory (MacCallum et al., 2010; von Oertzen, 2010), we propose a computational framework to promote more systematic searches within the study design space. Starting with an initial design, the proposed framework generates a set of alternative models with equal statistical power to detect hypothesized effects, and delineates trade-off relations among relevant parameters, such as total study time and the number of measurement occasions. We present LIFESPAN (Longitudinal Interactive Front End Study Planner), which implements this framework. LIFESPAN boosts the efficiency, breadth, and precision of the search for optimal longitudinal designs. Its initial version, which is freely available at http://www.brandmaier.de/lifespan, is geared toward the power to detect variance in change as specified in a linear latent growth curve model. PMID:25852596

Designing Teaching--Teaching Designing: Teacher's Guidance in a Virtual Design Studio

ERIC Educational Resources Information Center

Lahti, Henna; Seitamaa-Hakkarainen, Pirita

2014-01-01

This study examined pedagogical aspects of virtual designing. It focused on how an industrial design teacher organised a university course in plastic product design and how the teacher guided student teams' design processes in a virtual design studio. The model of Learning by Collaborative Design was used as a pedagogical and analytical framework.…

Topology Optimization using the Level Set and eXtended Finite Element Methods: Theory and Applications

NASA Astrophysics Data System (ADS)

Villanueva Perez, Carlos Hernan

Computational design optimization provides designers with automated techniques to develop novel and non-intuitive optimal designs. Topology optimization is a design optimization technique that allows for the evolution of a broad variety of geometries in the optimization process. Traditional density-based topology optimization methods often lack a sufficient resolution of the geometry and physical response, which prevents direct use of the optimized design in manufacturing and the accurate modeling of the physical response of boundary conditions. The goal of this thesis is to introduce a unified topology optimization framework that uses the Level Set Method (LSM) to describe the design geometry and the eXtended Finite Element Method (XFEM) to solve the governing equations and measure the performance of the design. The methodology is presented as an alternative to density-based optimization approaches, and is able to accommodate a broad range of engineering design problems. The framework presents state-of-the-art methods for immersed boundary techniques to stabilize the systems of equations and enforce the boundary conditions, and is studied with applications in 2D and 3D linear elastic structures, incompressible flow, and energy and species transport problems to test the robustness and the characteristics of the method. A comparison of the framework against density-based topology optimization approaches is studied with regards to convergence, performance, and the capability to manufacture the designs. Furthermore, the ability to control the shape of the design to operate within manufacturing constraints is developed and studied. The analysis capability of the framework is validated quantitatively through comparison against previous benchmark studies, and qualitatively through its application to topology optimization problems. The design optimization problems converge to intuitive designs and resembled well the results from previous 2D or density-based studies.

The Role of Transfer in Designing Games and Simulations for Health: Systematic Review

PubMed Central

Terlouw, Gijs; Wartena, Bard O; van 't Veer, Job TB; Prins, Jelle T; Pierie, Jean Pierre EN

2017-01-01

Background The usefulness and importance of serious games and simulations in learning and behavior change for health and health-related issues are widely recognized. Studies have addressed games and simulations as interventions, mostly in comparison with their analog counterparts. Numerous complex design choices have to be made with serious games and simulations for health, including choices that directly contribute to the effects of the intervention. One of these decisions is the way an intervention is expected to lead to desirable transfer effects. Most designs adopt a first-class transfer rationale, whereas the second class of transfer types seems a rarity in serious games and simulations for health. Objective This study sought to review the literature specifically on the second class of transfer types in the design of serious games and simulations. Focusing on game-like interventions for health and health care, this study aimed to (1) determine whether the second class of transfer is recognized as a road for transfer in game-like interventions, (2) review the application of the second class of transfer type in designing game-like interventions, and (3) assess studies that include second-class transfer types reporting transfer outcomes. Methods A total of 6 Web-based databases were systematically searched by titles, abstracts, and keywords using the search strategy (video games OR game OR games OR gaming OR computer simulation*) AND (software design OR design) AND (fidelity OR fidelities OR transfer* OR behaviour OR behavior). The databases searched were identified as relevant to health, education, and social science. Results A total of 15 relevant studies were included, covering a range of game-like interventions, all more or less mentioning design parameters aimed at transfer. We found 9 studies where first-class transfer was part of the design of the intervention. In total, 8 studies dealt with transfer concepts and fidelity types in game-like intervention design in general; 3 studies dealt with the concept of second-class transfer types and reported effects, and 2 of those recognized transfer as a design parameter. Conclusions In studies on game-like interventions for health and health care, transfer is regarded as a desirable effect but not as a basic principle for design. None of the studies determined the second class of transfer or instances thereof, although in 3 cases a nonliteral transfer type was present. We also found that studies on game-like interventions for health do not elucidate design choices made and rarely provide design principles for future work. Games and simulations for health abundantly build upon the principles of first-class transfer, but the adoption of second-class transfer types proves scarce. It is likely to be worthwhile to explore the possibilities of second-class transfer types, as they may considerably influence educational objectives in terms of future serious game design for health. PMID:29175812

Gaming in the Classroom: An Innovative Way to Teach Factorial Designs

ERIC Educational Resources Information Center

Stansbury, Jessica A.; Munro, Geoffrey D.

2013-01-01

This study tested the effectiveness of video game use for instruction of factorial designs in a research methods course. Students designed and conducted a mini study, playing "Dance, Dance, Revolution", using video game scores as the dependent variable. A mixed-design analysis of variance revealed a significantly greater increase from pretest to…

Examining the Characteristics of Digital Learning Games Designed by In-Service Teachers

ERIC Educational Resources Information Center

An, Yun-Jo; Cao, Li

2017-01-01

In order to better understand teachers' perspectives on the design and development of digital game-based learning environments, this study examined the characteristics of digital learning games designed by teachers. In addition, this study explored how game design and peer critique activities influenced their perceptions of digital game-based…

Research Designs and Special Education Research: Different Designs Address Different Questions

ERIC Educational Resources Information Center

Cook, Bryan G.; Cook, Lysandra

2016-01-01

The aim of this article is to provide practitioners and other nonresearchers a basic understanding of research designs to aid in appropriately interpreting and applying research findings in special education. Research design provides the blueprint for conducting a research study and shapes what kind of knowledge is generated by the study. We…

Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study. Appendix G: LRB for the STS system study level 2 requirements, revision 1

NASA Technical Reports Server (NTRS)

1989-01-01

Requirements are presented for shuttle system definition; performance and design characteristics; shuttle vehicle end item performance and design characteristics; ground operations complex performance and design characteristics; operability and system design and construction standards; and quality control.

A District-Wide High School Formative Experiment Designed to Improve Student Achievement

ERIC Educational Resources Information Center

Frey, Nancy; Fisher, Douglas

2013-01-01

This study focuses on district leadership designed to improve student achievement. We employed a formative experiment design methodology, a type of design study, to investigate the leadership efforts to improve student and teacher learning. The findings suggest that leadership through professional development and an instructional framework led to…

Generating Alternative Engineering Designs by Integrating Desktop VR with Genetic Algorithms

ERIC Educational Resources Information Center

Chandramouli, Magesh; Bertoline, Gary; Connolly, Patrick

2009-01-01

This study proposes an innovative solution to the problem of multiobjective engineering design optimization by integrating desktop VR with genetic computing. Although, this study considers the case of construction design as an example to illustrate the framework, this method can very much be extended to other engineering design problems as well.…

A Workforce Design Model: Providing Energy to Organizations in Transition

ERIC Educational Resources Information Center

Halm, Barry J.

2011-01-01

The purpose of this qualitative study was to examine the change in performance realized by a professional services organization, which resulted in the Life Giving Workforce Design (LGWD) model through a grounded theory research design. This study produced a workforce design model characterized as an organizational blueprint that provides virtuous…

E-Laboratory Design and Implementation for Enhanced Science, Technology and Engineering Education

ERIC Educational Resources Information Center

Morton, William; Uhomoibhi, James

2011-01-01

Purpose: This paper aims to report on the design and implementation of an e-laboratory for enhanced science, technology and engineering education studies. Design/methodology/approach: The paper assesses a computer-based e-laboratory, designed for new entrants to science, technology and engineering programmes of study in further and higher…

A Design Study of a Multimedia Instructional Grammar Program with Embedded Tracking

ERIC Educational Resources Information Center

Koehler, Natalya A.; Thompson, Ann D.; Phye, Gary D.

2011-01-01

This is a design study meant to demonstrate the feasibility of integrating three rather different theoretical perspectives for future efforts in multimedia instructional design. A multimedia instructional grammar program contextualized within the teaching of English as a Second Language (ESL) was developed and evaluated. The program design was…

Collective Design of an E-Textbook: Teachers' Collective Documentation

ERIC Educational Resources Information Center

Gueudet, Ghislaine; Pepin, Birgit; Sabra, Hussein; Trouche, Luc

2016-01-01

In this study, we investigated design processes in teacher collectives, which have been made possible by new "digital" opportunities: platforms, discussion lists, etc. The object of our study is the French Sésamath teacher association and its design of a grade 10 e-textbook, more precisely the design of the "functions" chapter.…

Volatile Organic Compound and Particulate Emission Studies of AF (Air Force) Paint Booth Facilities. Phase 1.

DTIC Science & Technology

1988-07-01

quantity of air which requires processing. Recirculation systems were designed for two of the painting facilities included in this study. In designing the...BACKGROUND AND PURPOSE .... ................ .... 57 B. DESIGN CONSIDERATIONS .... ............... .... 58 1. Safety Standards .......... ............... 58...65 5. Conceptual Design .... ................ ... 68 V CONCLUSIONS AND RECOMMENDATIONS ............... .. 72 A. CONCLUSIONS

A Critical Review of Instructional Design Process of Distance Learning System

ERIC Educational Resources Information Center

Chaudry, Muhammad Ajmal; ur-Rahman, Fazal

2010-01-01

Instructional design refers to planning, development, delivery and evaluation of instructional system. It is an applied field of study aiming at the application of descriptive research outcomes in regular instructional settings. The present study was designed to critically review the process of instructional design at Allama Iqbal Open University…

Assessing the Design and Development of Hybrid Linked Learning Professional Development Programs for Teachers: Challenges and Successes

ERIC Educational Resources Information Center

Erener, Eren

2017-01-01

This study informs instructional designers, all stakeholders in higher education and K-12, of the successes and challenges associated with designing and developing online/hybrid Linked Learning courses. The study examines via surveys and interviews the perspectives of instructional designers, subject matter experts, students, and course…

Emotional Design in Multimedia: Does Gender and Academic Achievement Influence Learning Outcomes?

ERIC Educational Resources Information Center

Kumar, Jeya Amantha; Muniandy, Balakrishnan; Yahaya, Wan Ahmad Jaafar Wan

2016-01-01

This study was designed as a preliminary study (N = 33) to explore the effects of gender and academic achievement (Cumulative Grade Point Average-CGPA) on polytechnic students' learning outcomes when exposed to Multimedia Learning Environments (MLE) designed to induce emotions. Three designs namely positive (PosD), neutral (NeuD) and negative…

Exploring Teacher Design Team Endeavors While Creating an Elementary-Focused STEM-Integrated Curriculum

ERIC Educational Resources Information Center

McFadden, Justin R.; Roehrig, Gillian H.

2017-01-01

Background: This study presents two teacher design teams (TDTs) during a professional development experience centered on science, technology, engineering, and mathematics (STEM)-integrated curriculum development. The main activity of the study, curriculum design, was framed as a design problem in order to better understand how teachers engaged…

Cost studies for commercial fuselage crown designs

NASA Technical Reports Server (NTRS)

Walker, T. H.; Smith, P. J.; Truslove, G.; Willden, K. S.; Metschan, S. L.; Pfahl, C. L.

1991-01-01

Studies were conducted to evaluate the cost and weight potential of advanced composite design concepts in the crown region of a commercial transport. Two designs from each of three design families were developed using an integrated design-build team. A range of design concepts and manufacturing processes were included to allow isolation and comparison of cost centers. Detailed manufacturing/assembly plans were developed as the basis for cost estimates. Each of the six designs was found to have advantages over the 1995 aluminum benchmark in cost and weight trade studies. Large quadrant panels and cobonded frames were found to save significant assembly labor costs. Comparisons of high- and intermediate-performance fiber systems were made for skin and stringer applications. Advanced tow placement was found to be an efficient process for skin lay up. Further analysis revealed attractive processes for stringers and frames. Optimized designs were informally developed for each design family, combining the most attractive concepts and processes within that family. A single optimized design was selected as the most promising, and the potential for further optimization was estimated. Technical issues and barriers were identified.

Design Trade Study for a 4-Meter Off-Axis Primary Mirror Substrate and Mount for the Habitable-Zone Exoplanet Direct Imaging Mission

NASA Technical Reports Server (NTRS)

Arnold, William R.; Stahl, H. Philip

2017-01-01

An extensive trade study was conducted to evaluate primary mirror substrate design architectures for the HabEx mission baseline 4-meter off-axis telescope. The study’s purpose is not to produce a final design, but rather to established a design methodology for matching the mirror’s properties (mass and stiffness) with the mission’s optical performance specifications (static dynamic wavefront error, WFE). The study systematically compares the effect of proven design elements (closed-back vs. open-back vs. partial-back; meniscus vs. flat back vs. shaped back; etc.), which can be implemented with proven space mirror materials (ULE and Zerodur), on static and dynamic WFE. Additionally, the study compares static and dynamic WFE of each substrate point design integrated onto three and six point mounts.

High lift selected concepts

NASA Technical Reports Server (NTRS)

Henderson, M. L.

1979-01-01

The benefits to high lift system maximum life and, alternatively, to high lift system complexity, of applying analytic design and analysis techniques to the design of high lift sections for flight conditions were determined and two high lift sections were designed to flight conditions. The influence of the high lift section on the sizing and economics of a specific energy efficient transport (EET) was clarified using a computerized sizing technique and an existing advanced airplane design data base. The impact of the best design resulting from the design applications studies on EET sizing and economics were evaluated. Flap technology trade studies, climb and descent studies, and augmented stability studies are included along with a description of the baseline high lift system geometry, a calculation of lift and pitching moment when separation is present, and an inverse boundary layer technique for pressure distribution synthesis and optimization.

The International Design Study for the Neutrino Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, K.

2008-02-21

The International Design Study for a future Neutrino Factory and super-beam facility (the ISS) established the physics case for a high-precision programme of long-baseline neutrino-oscillation measurements. The ISS also identified baseline specifications for the Neutrino Factory accelerator complex and the neutrino detector systems. This paper summarises the objectives of the International Design Study for the Neutrino Factory (the IDS-NF). The IDS-NF will build on the work of the ISS to deliver a Reference Design Report for the Neutrino Factory by 2012/13 and an Interim Design Report by 2010/11.

Evaluating hospital design from an operations management perspective.

PubMed

Vos, Leti; Groothuis, Siebren; van Merode, Godefridus G

2007-12-01

This paper describes an evaluation method for the assessment of hospital building design from the viewpoint of operations management to assure that the building design supports the efficient and effective operating of care processes now and in the future. The different steps of the method are illustrated by a case study. In the case study an experimental design is applied to assess the effect of used logistical concepts, patient mix and technologies. The study shows that the evaluation method provides a valuable tool for the assessment of both functionality and the ability to meet future developments in operational control of a building design.

The 1990-1991 project summaries

NASA Technical Reports Server (NTRS)

1991-01-01

The Mechanical Engineering Department at The University of Texas at Austin participated in the NASA/USRA University Advanced Design Program on both an undergraduate and a graduate level during the 1990-91 academic year. The focus of study was on four design projects that fall into one of the following areas: (1) the establishment of a lunar base and (2) mission planet Earth. The design projects were incorporated into already existing design courses and students worked together in groups of three to five. A background of each area of study is provided, along with synopses, conclusions, and recommendations for further study for each design project.

Designing Web-Based Educative Curriculum Materials for the Social Studies

ERIC Educational Resources Information Center

Callahan, Cory; Saye, John; Brush, Thomas

2013-01-01

This paper reports on a design experiment of web-based curriculum materials explicitly created to help social studies teachers develop their professional teaching knowledge. Web-based social studies curriculum reform efforts, human-centered interface design, and investigations into educative curriculum materials are reviewed, as well as…

34 CFR 77.1 - Definitions that apply to all Department programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... statistical controls for selection bias; (B) Quasi-experimental study that meets the What Works Clearinghouse... administrative supervision or control of a government other than the Federal Government. Quasi-experimental design study means a study using a design that attempts to approximate an experimental design by...

Communicating Qualitative Research Study Designs to Research Ethics Review Boards

ERIC Educational Resources Information Center

Ells, Carolyn

2011-01-01

Researchers using qualitative methodologies appear to be particularly prone to having their study designs called into question by research ethics or funding agency review committees. In this paper, the author considers the issue of communicating qualitative research study designs in the context of institutional research ethics review and offers…

Design Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technology Studies (CTS) curriculum guide, secondary students in Alberta can do the following: develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in design; enhance employability skills, especially in design occupations; and apply and reinforce learning…

77 FR 30016 - Clinical Study Design and Performance of Hospital Glucose Sensors

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

...] Clinical Study Design and Performance of Hospital Glucose Sensors AGENCY: Food and Drug Administration, HHS... Sensors.'' The purpose of this public meeting is to discuss clinical study design considerations and performance metrics for innovative glucose sensors intended to be used in hospital point of care settings...

Commentary: The Challenge of Nonexperimental Interventions Studies in Social Work

ERIC Educational Resources Information Center

Schilling, Robert

2010-01-01

The challenging context of social work interventions require that most intervention studies will be derived from nonexperimental research designs. Two evaluation studies in this special issue employed nonrandomized designs to examine the efficacy of two programs--a police crisis intervention team designed to enhance officers' responses to mental…

77 FR 50514 - Post-Approval Studies 2012 Workshop: Design, Methodology, and Role in Evidence Appraisal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

...] Post-Approval Studies 2012 Workshop: Design, Methodology, and Role in Evidence Appraisal Throughout the... Administration (FDA) is announcing the following public workshop entitled ``Post-Approval Studies 2012 Workshop: Design, Methodology, and Role in Evidence Appraisal Throughout the Total Product Life Cycle.'' The topics...

Designscholar: Examining Creative Thinking in an Online Learning Community for Interior Design Graduate Students

ERIC Educational Resources Information Center

Ransdell, Marlo Evelyn

2009-01-01

This study examined the creative thinking of interior design graduate students in an online learning community. This study considered potential changes in creative thinking (fluency, flexibility, originality, and elaboration) about design research resulting from peer-led online discussions. It further studied the learner characteristics of…

75 FR 34142 - Agency Information Collection Activities; Proposed Collection; Comment Request; Study of Clinical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... Advertisements for Prescription Drugs. This study is designed to investigate efficacy and effectiveness... efficacy of potential pharmaceutical options (OMB control no. 0910-0649). Design Overview This study will... conditions. This design will allow us to compare consumers' perceptions of efficacy with a more objective...

Does "Word Coach" Coach Words?

ERIC Educational Resources Information Center

Cobb, Tom; Horst, Marlise

2011-01-01

This study reports on the design and testing of an integrated suite of vocabulary training games for Nintendo[TM] collectively designated "My Word Coach" (Ubisoft, 2008). The games' design is based on a wide range of learning research, from classic studies on recycling patterns to frequency studies of modern corpora. Its general usage…

78 FR 11207 - Clinical Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

...] Clinical Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation; Guidance for... devices intended for the treatment of atrial fibrillation. DATES: Submit either electronic or written... Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation'' to the Division of...

Influence of Design Training and Spatial Solution Strategies on Spatial Ability Performance

ERIC Educational Resources Information Center

Lin, Hanyu

2016-01-01

Numerous studies have reported that spatial ability improves through training. This study investigated the following: (1) whether design training enhances spatial ability and (2) whether differing solution strategies are applied or generated following design training. On the basis of these two research objectives, this study divided the…

Framing Behaviours in Novice Interaction Designers

ERIC Educational Resources Information Center

Lotz, Nicole; Sharp, Helen; Woodroffe, Mark; Blyth, Richard; Rajah, Dino; Ranganai, Turugare

2015-01-01

Framing design problems and solutions has been recognised in design studies as a central designerly activity. Some recent findings with expert designers relate framing practices to problem-solution co-evolution and analogy use, two further widely recognised design strategies. We wanted to understand if interaction design novices also use…

Methodological considerations in the design and implementation of clinical trials.

PubMed

Cirrincione, Constance T; Lavoie Smith, Ellen M; Pang, Herbert

2014-02-01

To review study design issues related to clinical trials led by oncology nurses, with special attention to those conducted within the cooperative group setting; to emphasize the importance of the statistician's role in the process of clinical trials. Studies available at clinicaltrials.gov using experimental designs that have been published in peer-reviewed journals; cooperative group trials are highlighted. The clinical trial is a primary means to test intervention efficacy. A properly designed and powered study with clear and measurable objectives is as important as the intervention itself. Collaboration among the study team, including the statistician, is central in developing and conducting appropriately designed studies. For optimal results, collaboration is an ongoing process that should begin early on. Copyright © 2014 Elsevier Inc. All rights reserved.

Perspective: Randomized Controlled Trials Are Not a Panacea for Diet-Related Research12

PubMed Central

Hébert, James R; Frongillo, Edward A; Adams, Swann A; Turner-McGrievy, Gabrielle M; Hurley, Thomas G; Miller, Donald R; Ockene, Ira S

2016-01-01

Research into the role of diet in health faces a number of methodologic challenges in the choice of study design, measurement methods, and analytic options. Heavier reliance on randomized controlled trial (RCT) designs is suggested as a way to solve these challenges. We present and discuss 7 inherent and practical considerations with special relevance to RCTs designed to study diet: 1) the need for narrow focus; 2) the choice of subjects and exposures; 3) blinding of the intervention; 4) perceived asymmetry of treatment in relation to need; 5) temporal relations between dietary exposures and putative outcomes; 6) strict adherence to the intervention protocol, despite potential clinical counter-indications; and 7) the need to maintain methodologic rigor, including measuring diet carefully and frequently. Alternatives, including observational studies and adaptive intervention designs, are presented and discussed. Given high noise-to-signal ratios interjected by using inaccurate assessment methods in studies with weak or inappropriate study designs (including RCTs), it is conceivable and indeed likely that effects of diet are underestimated. No matter which designs are used, studies will require continued improvement in the assessment of dietary intake. As technology continues to improve, there is potential for enhanced accuracy and reduced user burden of dietary assessments that are applicable to a wide variety of study designs, including RCTs. PMID:27184269

Waste Handeling Building Conceptual Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

G.W. Rowe

2000-11-06

The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable,more » and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system.« less

Quantification of construction waste prevented by BIM-based design validation: Case studies in South Korea.

PubMed

Won, Jongsung; Cheng, Jack C P; Lee, Ghang

2016-03-01

Waste generated in construction and demolition processes comprised around 50% of the solid waste in South Korea in 2013. Many cases show that design validation based on building information modeling (BIM) is an effective means to reduce the amount of construction waste since construction waste is mainly generated due to improper design and unexpected changes in the design and construction phases. However, the amount of construction waste that could be avoided by adopting BIM-based design validation has been unknown. This paper aims to estimate the amount of construction waste prevented by a BIM-based design validation process based on the amount of construction waste that might be generated due to design errors. Two project cases in South Korea were studied in this paper, with 381 and 136 design errors detected, respectively during the BIM-based design validation. Each design error was categorized according to its cause and the likelihood of detection before construction. The case studies show that BIM-based design validation could prevent 4.3-15.2% of construction waste that might have been generated without using BIM. Copyright © 2015 Elsevier Ltd. All rights reserved.

Report of the Working Design Group

NASA Technical Reports Server (NTRS)

1992-01-01

The engineering study group in the LOUISA workshop was responsible for producing a preliminary general design for an optical synthetic aperture telescope on the Moon. This design is intended to be a test case for focusing continuing design studies. The scope of the design included consideration of the array geometry, individual telescopes, metrology, site attributes, and construction. However, no attempt was made to go into further depth in the design than to cover the essential characteristics of the instrument. The starting point for the array design was the lunar optical array discussed by Burke (1985). His array geometry followed the design and correlation procedure of the 27-element Very Large Array (VLA) radio telescopes near Socorro, New Mexico.

Relation between experimental and non-experimental study designs. HB vaccines: a case study.

PubMed

Jefferson, T; Demicheli, V

1999-01-01

To examine the relation between experimental and non-experimental study design in vaccinology. Assessment of each study design's capability of testing four aspects of vaccine performance, namely immunogenicity (the capacity to stimulate the immune system), duration of immunity conferred, incidence and seriousness of side effects, and number of infections prevented by vaccination. Experimental and non-experimental studies on hepatitis B (HB) vaccines in the Cochrane Vaccines Field Database. Experimental and non-experimental vaccine study designs are frequently complementary but some aspects of vaccine quality can only be assessed by one of the types of study. More work needs to be done on the relation between study quality and its significance in terms of effect size.

Design Exception In-Service Monitoring Program Development

DOT National Transportation Integrated Search

2017-05-01

This study evaluates various possible program designs for in-service monitoring of design exceptions (DEs) for the Georgia Department of Transportation. The study recommends a multitier stepwise approach to the evaluation of DEs. Specifically, the pr...

Escalator Design Features Evaluation

DOT National Transportation Integrated Search

1982-05-01

This study provides an evaluation of the effectiveness of several special design features associated with escalators in rail transit systems. The objective of the study was to evaluate the effectiveness of three escalator design features: (1) mat ope...

Analysis of Clinical Cohort Data Using Nested Case-control and Case-cohort Sampling Designs. A Powerful and Economical Tool.

PubMed

Ohneberg, K; Wolkewitz, M; Beyersmann, J; Palomar-Martinez, M; Olaechea-Astigarraga, P; Alvarez-Lerma, F; Schumacher, M

2015-01-01

Sampling from a large cohort in order to derive a subsample that would be sufficient for statistical analysis is a frequently used method for handling large data sets in epidemiological studies with limited resources for exposure measurement. For clinical studies however, when interest is in the influence of a potential risk factor, cohort studies are often the first choice with all individuals entering the analysis. Our aim is to close the gap between epidemiological and clinical studies with respect to design and power considerations. Schoenfeld's formula for the number of events required for a Cox' proportional hazards model is fundamental. Our objective is to compare the power of analyzing the full cohort and the power of a nested case-control and a case-cohort design. We compare formulas for power for sampling designs and cohort studies. In our data example we simultaneously apply a nested case-control design with a varying number of controls matched to each case, a case cohort design with varying subcohort size, a random subsample and a full cohort analysis. For each design we calculate the standard error for estimated regression coefficients and the mean number of distinct persons, for whom covariate information is required. The formula for the power of a nested case-control design and the power of a case-cohort design is directly connected to the power of a cohort study using the well known Schoenfeld formula. The loss in precision of parameter estimates is relatively small compared to the saving in resources. Nested case-control and case-cohort studies, but not random subsamples yield an attractive alternative for analyzing clinical studies in the situation of a low event rate. Power calculations can be conducted straightforwardly to quantify the loss of power compared to the savings in the num-ber of patients using a sampling design instead of analyzing the full cohort.

Conceptual design of reduced energy transports

NASA Technical Reports Server (NTRS)

Ardema, M. D.; Harper, M.; Smith, C. L.; Waters, M. H.; Williams, L. J.

1975-01-01

This paper reports the results of a conceptual design study of new, near-term fuel-conservative aircraft. A parametric study was made to determine the effects of cruise Mach number and fuel cost on the 'optimum' configuration characteristics and on economic performance. Supercritical wing technology and advanced engine cycles were assumed. For each design, the wing geometry was optimized to give maximum return on investment at a particular fuel cost. Based on the results of the parametric study, a reduced energy configuration was selected. Compared with existing transport designs, the reduced energy design has a higher aspect ratio wing with lower sweep, and cruises at a lower Mach number. It yields about 30% more seat-miles/gal than current wide-body aircraft. At the higher fuel costs anticipated in the future, the reduced energy design has about the same economic performance as existing designs.

The nature and outcomes of work: a replication and extension of interdisciplinary work-design research.

PubMed

Edwards, J R; Scully, J A; Brtek, M D

2000-12-01

Research into the changing nature of work requires comprehensive models of work design. One such model is the interdisciplinary framework (M. A. Campion, 1988), which integrates 4 work-design approaches (motivational, mechanistic, biological, perceptual-motor) and links each approach to specific outcomes. Unfortunately, studies of this framework have used methods that disregard measurement error, overlook dimensions within each work-design approach, and treat each approach and outcome separately. This study reanalyzes data from M. A. Campion (1988), using structural equation models that incorporate measurement error, specify multiple dimensions for each work-design approach, and examine the work-design approaches and outcomes jointly. Results show that previous studies underestimate relationships between work-design approaches and outcomes and that dimensions within each approach exhibit relationships with outcomes that differ in magnitude and direction.

Turbomachinery design considerations for the nuclear HTGR-GT power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, C.F.; Smith, M.J.

1979-11-01

For several years, design studies have been under way in the USA on a nuclear closed-cycle gas turbine plant (HTGR-GT). Design aspects of the helium turbomachine portion of these studies are presented. Gas dynamic and mechanical design considerations are presented for helium turbomachines in the 400-MW(e) (non-intercooled) and 600-MW(e) (intercooled) power range. Design of the turbomachine is a key element in the overall power plant program effort, which is currently directed toward the selection of a reference HTGR-GT commercial plant configuration for the US utility market. A conservative design approach has been emphasized to provide maximum safety and durability. Themore » studies presented for the integrated plant concept outline the necessary close working relationship between the reactor primary system and turbomachine designers.« less

What Evidence Underlies Clinical Practice in Paediatric Surgery? A Systematic Review Assessing Choice of Study Design.

PubMed

Allin, Benjamin; Aveyard, Nicholas; Campion-Smith, Timothy; Floyd, Eleanor; Kimpton, James; Swarbrick, Kate; Williams, Emma; Knight, Marian

2016-01-01

Identify every paediatric surgical article published in 1998 and every paediatric surgical article published in 2013, and determine which study designs were used and whether they were appropriate for robustly assessing interventions in surgical conditions. A systematic review was conducted according to a pre-specified protocol (CRD42014007629), using EMBASE and Medline. Non-English language studies were excluded. Studies were included if meeting population criteria and either condition or intervention criteria. Children under the age of 18, or adults who underwent intervention for a condition managed by paediatric surgeons when they were under 18 years of age. One managed by general paediatric surgeons. Used for treatment of a condition managed by general paediatric surgeons. Studies were classified according to whether the IDEAL collaboration recommended their design for assessing surgical interventions or not. Change in proportions between 1998 and 2013 was calculated. 1581 paediatric surgical articles were published in 1998, and 3453 in 2013. The most commonly used design, accounting for 45% of studies in 1998 and 46.8% in 2013, was the retrospective case series. Only 1.8% of studies were RCTs in 1998, and 1.9% in 2013. Overall, in 1998, 9.8% of studies used a recommended design. In 2013, 11.9% used a recommended design (proportion increase 2.3%, 95% confidence interval 0.5% increase to 4% increase, p = 0.017). A low proportion of published paediatric surgical manuscripts utilise a design that is recommended for assessing surgical interventions. RCTs represent fewer than 1 in 50 studies. In 2013, 88.1% of studies used a less robust design, suggesting the need for a new way of approaching paediatric surgical research.

An analytical study for the design of advanced rotor airfoils

NASA Technical Reports Server (NTRS)

Kemp, L. D.

1973-01-01

A theoretical study has been conducted to design and evaluate two airfoils for helicopter rotors. The best basic shape, designed with a transonic hodograph design method, was modified to meet subsonic criteria. One airfoil had an additional constraint for low pitching-moment at the transonic design point. Airfoil characteristics were predicted. Results of a comparative analysis of helicopter performance indicate that the new airfoils will produce reduced rotor power requirements compared to the NACA 0012. The hodograph design method, written in CDC Algol, is listed and described.

Preliminary design studies of an advanced general aviation aircraft

NASA Technical Reports Server (NTRS)

Barrett, Ron; Demoss, Shane; Dirkzwager, AB; Evans, Darryl; Gomer, Charles; Keiter, Jerry; Knipp, Darren; Seier, Glen; Smith, Steve; Wenninger, ED

1991-01-01

The preliminary design results are presented of the advanced aircraft design project. The goal was to take a revolutionary look into the design of a general aviation aircraft. Phase 1 of the project included the preliminary design of two configurations, a pusher, and a tractor. Phase 2 included the selection of only one configuration for further study. The pusher configuration was selected on the basis of performance characteristics, cabin noise, natural laminar flow, and system layouts. The design was then iterated to achieve higher levels of performance.

Effect of Study Design on Sample Size in Studies Intended to Evaluate Bioequivalence of Inhaled Short-Acting β-Agonist Formulations.

PubMed

Zeng, Yaohui; Singh, Sachinkumar; Wang, Kai; Ahrens, Richard C

2018-04-01

Pharmacodynamic studies that use methacholine challenge to assess bioequivalence of generic and innovator albuterol formulations are generally designed per published Food and Drug Administration guidance, with 3 reference doses and 1 test dose (3-by-1 design). These studies are challenging and expensive to conduct, typically requiring large sample sizes. We proposed 14 modified study designs as alternatives to the Food and Drug Administration-recommended 3-by-1 design, hypothesizing that adding reference and/or test doses would reduce sample size and cost. We used Monte Carlo simulation to estimate sample size. Simulation inputs were selected based on published studies and our own experience with this type of trial. We also estimated effects of these modified study designs on study cost. Most of these altered designs reduced sample size and cost relative to the 3-by-1 design, some decreasing cost by more than 40%. The most effective single study dose to add was 180 μg of test formulation, which resulted in an estimated 30% relative cost reduction. Adding a single test dose of 90 μg was less effective, producing only a 13% cost reduction. Adding a lone reference dose of either 180, 270, or 360 μg yielded little benefit (less than 10% cost reduction), whereas adding 720 μg resulted in a 19% cost reduction. Of the 14 study design modifications we evaluated, the most effective was addition of both a 90-μg test dose and a 720-μg reference dose (42% cost reduction). Combining a 180-μg test dose and a 720-μg reference dose produced an estimated 36% cost reduction. © 2017, The Authors. The Journal of Clinical Pharmacology published by Wiley Periodicals, Inc. on behalf of American College of Clinical Pharmacology.

Structural design considerations for the beam transmission optical system

NASA Technical Reports Server (NTRS)

Macneal, Paul D.; Lou, Michael C.

1993-01-01

The paper describes the JPL study leading to a baseline design of the Beam Transmission Optical System (BTOS), designed for the delivery of laser energy from earth to space targets. The study identified the driving environmental and functional requirements; developed a conceptual design of the BTOS telescope; and performed static, thermal distortion, and model analyses to verify that these requirements are met. The study also identified major areas of concern which should be investigated further.

Effects of imperfect test sensitivity and specificity on observational studies of influenza vaccine effectiveness.

PubMed

Jackson, Michael L; Rothman, Kenneth J

2015-03-10

The recently developed test-negative design is now standard for observational studies of influenza vaccine effectiveness (VE). It is unclear how influenza test misclassification biases test-negative VE estimates relative to VE estimates from traditional cohort or case-control studies. We simulated populations whose members may develop acute respiratory illness (ARI) due to influenza and to non-influenza pathogens. In these simulations, vaccination reduces the risk of influenza but not of non-influenza ARI. Influenza test sensitivity and specificity, risks of influenza and non-influenza ARI, and VE were varied across the simulations. In each simulation, we estimated influenza VE using a cohort design, a case-control design, and a test-negative design. In the absence of influenza test misclassification, all three designs accurately estimated influenza VE. In the presence of misclassification, all three designs underestimated VE. Bias in VE estimates was slightly greater in the test-negative design than in cohort or case-control designs. Assuming the use of highly sensitive and specific reverse-transcriptase polymerase chain reaction tests for influenza, bias in the test-negative studies was trivial across a wide range of realistic values for VE. Although influenza test misclassification causes more bias in test-negative studies than in traditional cohort or case-control studies, the difference is trivial for realistic combinations of attack rates, test sensitivity/specificity, and VE. Copyright © 2015 Elsevier Ltd. All rights reserved.

75 FR 69680 - National Institute of Child Health and Human Development; Revision to Proposed Collection...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... study design elements for a prospective, national longitudinal study of child health and development. In combination, the substudies encompassed by the Vanguard phase will be used to inform the design of the Main... that are to be used in the design of the NCS Main Study. The Vanguard Study begins prior to the NCS...

A Design Research Study of a Curriculum and Diagnostic Assessment System for a Learning Trajectory on Equipartitioning

ERIC Educational Resources Information Center

Confrey, Jere; Maloney, Alan

2015-01-01

Design research studies provide significant opportunities to study new innovations and approaches and how they affect the forms of learning in complex classroom ecologies. This paper reports on a two-week long design research study with twelve 2nd through 4th graders using curricular materials and a tablet-based diagnostic assessment system, both…

Designing a Consequentially Based Study into the Online Support of Pre-Service Teachers in the UK

ERIC Educational Resources Information Center

Kontopoulou, Konstantina; Fox, Alison

2015-01-01

This paper reports on the design of a pilot doctoral study into the online support of pre-service teachers. It highlights the significance of a consequential, rather than deontological, perspective in guiding the development of a study's design. The study initially aimed to explore pre-service teachers' perceptions and use of social media on their…

Space station Simulation Computer System (SCS) study for NASA/MSFC. Volume 3: Refined conceptual design report

NASA Technical Reports Server (NTRS)

1989-01-01

The results of the refined conceptual design phase (task 5) of the Simulation Computer System (SCS) study are reported. The SCS is the computational portion of the Payload Training Complex (PTC) providing simulation based training on payload operations of the Space Station Freedom (SSF). In task 4 of the SCS study, the range of architectures suitable for the SCS was explored. Identified system architectures, along with their relative advantages and disadvantages for SCS, were presented in the Conceptual Design Report. Six integrated designs-combining the most promising features from the architectural formulations-were additionally identified in the report. The six integrated designs were evaluated further to distinguish the more viable designs to be refined as conceptual designs. The three designs that were selected represent distinct approaches to achieving a capable and cost effective SCS configuration for the PTC. Here, the results of task 4 (input to this task) are briefly reviewed. Then, prior to describing individual conceptual designs, the PTC facility configuration and the SSF systems architecture that must be supported by the SCS are reviewed. Next, basic features of SCS implementation that have been incorporated into all selected SCS designs are considered. The details of the individual SCS designs are then presented before making a final comparison of the three designs.

Practicing universal design to actual hand tool design process.

PubMed

Lin, Kai-Chieh; Wu, Chih-Fu

2015-09-01

UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design Process-System and Methodology of Design Research

NASA Astrophysics Data System (ADS)

Bashier, Fathi

2017-10-01

Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

Critical Studies in Art and Design Education.

ERIC Educational Resources Information Center

Thistlewood, David, Ed.

This book brings together British and U.S. contributions to the debate of a critical studies approach to art and design education. The approach links practice and appreciation. But critical differences exist in definitions of the term design, with the U.S. recognition of design as the use of principles and elements of art in works and a British…

Professional Development for Design-Based Learning in Engineering Education: A Case Study

ERIC Educational Resources Information Center

Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

2015-01-01

Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects.…

Age 60 Study. Part 1. Bibliographic Database

DTIC Science & Technology

1994-10-01

seven of these aircraft types participated in a spectacle design study. Experimental spectacles were designed for each pilot and evaluated for...observation flight administered by observers who were uninformed of the details of the experimental design . Students and instructors also completed a critique...intraindividual lability in field-dependence-field independence, and (4) various measurement, sampling, and experimental design concerns associated

Combining Anderson's Model in the Teaching of Art Appreciation for Undergraduate Students

ERIC Educational Resources Information Center

Subramaniam, Maithreyi; Basaree, Ruzaika Omar; Hanafi, Jaffri; Putih, Abu Talib

2016-01-01

This study utilized 33 students taking creative communication design 3 in the third year of the graphic design and multimedia program, using an Anderson's model in teaching art appreciation. The quantitative research design and procedures were employed in this study. An experimental research using the quasi-experimental design, a single-group…

Implications of Therapist Effects for the Design and Analysis of Comparative Studies of Psychotherapies.

ERIC Educational Resources Information Center

Crits-Christoph, Paul; Mintz, Jim

1991-01-01

Presents reasons therapist should be included as random design factor in nested analysis of (co)variance (AN[C]OVA) design used in psychotherapy research. Reviews studies which indicate majority of investigators ignore issue of effects from incorrect specification of ANOVA design. Presents reanalysis of data from 10 psychotherapy outcome studies…

Designing for Quality: An Analysis of Design and Pedagogical Issues in Online Course Development

ERIC Educational Resources Information Center

Sanga, Mapopa William

2017-01-01

This study investigated the process through which 100 online courses were developed in compliance with a purpose-made rubric designed to bring the courses to a level that would meet requirements of membership in a state authorization reciprocity agreement. The study identified and analyzed common design and pedagogical issues instructors…

Making Judgements about Students Making Work: Lecturers’ Assessment Practices in Art and Design

ERIC Educational Resources Information Center

Orr, Susan; Bloxham, Sue

2013-01-01

This research study explores the assessment practices in two higher education art and design departments. The key aim of this research was to explore art and design studio assessment practices as lived and experienced by art and design lecturers. This work draws on two bodies of pre-existing research. Firstly this study adopted methodological…

Teachers as Participatory Designers: Two Case Studies with Technology-Enhanced Learning Environments

ERIC Educational Resources Information Center

Cober, Rebecca; Tan, Esther; Slotta, Jim; So, Hyo-Jeong; Könings, Karen D.

2015-01-01

Teachers are not typically involved as participatory designers in the design of technology-enhanced learning environments. As they have unique and valuable perspectives on the role of technology in education, it is of utmost importance to engage them in a participatory design process. Adopting a case study methodology, we aim to reveal in what…

New Perspective on Visual Communication Design Education: An Empirical Study of Applying Narrative Theory to Graphic Design Courses

ERIC Educational Resources Information Center

Yang, Chao-Ming; Hsu, Tzu-Fan

2017-01-01

Visual communication design (VCD) is a form of nonverbal communication. The application of relevant linguistic or semiotic theories to VCD education renders graphic design an innovative and scientific discipline. In this study, actual teaching activities were examined to verify the feasibility of applying narrative theory to graphic design…

Instructional Design, Facilitation, and Perceived Learning Outcomes: An Exploratory Case Study of a Human Trafficking MOOC for Attitudinal Change

ERIC Educational Resources Information Center

Watson, Sunnie Lee; Loizzo, Jamie; Watson, William R.; Mueller, Chad; Lim, Jieun; Ertmer, Peggy A.

2016-01-01

This exploratory case study describes the design and facilitation of a massive open online course (MOOC) for attitudinal change regarding human trafficking. It examines the course from the learners', instructor's, and instructional designer's perspectives. Two interviews with the instructor and instructional designer were conducted, and data from…

Development of Design Guidelines for Tools to Promote Differentiated Instruction in Classroom Teaching

ERIC Educational Resources Information Center

Cha, H. J.; Ahn, M. L.

2014-01-01

The purpose of this study was to elicit design guidelines for a teacher tool to support students' diverse needs by facilitating differentiated instructions (DIs). The study used a framework based on activity theory and principles from universal design for learning. As for the research methods, design-based research methods were adopted, and as the…

Development Design Model of Academic Quality Assurance at Private Islamic University Jakarta Indonesia

ERIC Educational Resources Information Center

Suprihatin, Krebet; Bin Mohamad Yusof, Hj. Abdul Raheem

2015-01-01

This study aims to evaluate the practice of academic quality assurance in design model based on seven aspects of quality are: curriculum design, teaching and learning, student assessment, student selection, support services, learning resources, and continuous improvement. The design study was conducted in two stages. The first stage is to obtain…

Concept Maps as Instructional Tools for Improving Learning of Phase Transitions in Object-Oriented Analysis and Design

ERIC Educational Resources Information Center

Shin, Shin-Shing

2016-01-01

Students attending object-oriented analysis and design (OOAD) courses typically encounter difficulties transitioning from requirements analysis to logical design and then to physical design. Concept maps have been widely used in studies of user learning. The study reported here, based on the relationship of concept maps to learning theory and…

High School Students' Use of Paper-Based and Internet-Based Information Sources in the Engineering Design Process

ERIC Educational Resources Information Center

Pieper, Jon; Mentzer, Nathan

2013-01-01

Mentzer and Becker (2011) and Becker and Mentzer (2012) demonstrated that high school students engaged in engineering design problems spent more time accessing information and spent more time designing when provided with Internet access. They studied high school students engaged in an engineering design challenge. The two studies attempted to…

Embracing Wicked Problems: The Turn to Design in Composition Studies

ERIC Educational Resources Information Center

Marback, Richard

2009-01-01

Recent appeal to the concept of design in composition studies benefits teaching writing in digital media. Yet the concept of design has not been developed enough to fully benefit composition instruction. This article develops an understanding of design as a matter of resolving wicked problems and makes a case for the advantages of this…

Designing E-Portfolio with ARCS Motivational Design Strategies to Enhance Self-Directed Learning

ERIC Educational Resources Information Center

Mohamad, Syamsul Nor Azlan; Embi, Mohamed Amin; Nordin, Norazah Mohd

2016-01-01

This paper presents the instructional design effect on motivation towards the implementation of e-Portfolio with ARCS Motivational design strategies to enhance self-directed learning. The purpose of the study was to examine the learners' motivation level after the implementation of e-Portfolio. Initially, this paper was conducted to study a total…

Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

ERIC Educational Resources Information Center

Luo, Yi

2015-01-01

This paper presents a case study examining 3rd, 4th and 5th graders' design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP), was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes.…

Design without Make--A New Design Pedagogy for STEM Education

ERIC Educational Resources Information Center

Thompson, Brandon; Vernado, Terri; Matthews, Brian

2009-01-01

This paper describes the first part of a new three-part study of STEM and engineering design research termed Design-Without-Make to be conducted by NC [North Carolina] State University in 2009-10 in an NC high school. The hybrid quantitative, qualitative case study is being developed with the purpose of capturing what new technological learning…

Made to Measure: Designs Tailored to Your Study Needs.

PubMed

Jupiter, Daniel C

2015-01-01

What is the best study design? Why would we prefer one to another? With many different designs, what should we be looking for in our critical reading of the literature? We discuss a variety of designs, and their appropriate use. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Human Mars Lander Design for NASA's Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Polsgrove, Tara; Chapman, Jack; Sutherlin, Steve; Taylor, Brian; Fabisinski, Leo; Collins, Tim; Cianciolo Dwyer, Alicia; Samareh, Jamshid; Robertson, Ed; Studak, Bill;

The Single-Group, Pre- and Posttest Design in Nursing Education Research: It's Time to Move on.

PubMed

Spurlock, Darrell R

2018-02-01

Studying the effectiveness of educational interventions is centrally important to building the science of nursing education. Yet, the design most commonly used in the study of nursing education interventions-the single-group, preand posttest design-provides limited evidence to support claims of intervention effectiveness. In this Methodology Corner installment, the limitations of the single-group, preand posttest design are outlined and a review of the requirements for establishing stronger arguments for causality is presented. To overcome the limitations of single-group, preand posttest designs, nursing education researchers are encouraged to employ study designs and procedures that can significantly strengthen researchers' claims of intervention effectiveness. [J Nurs Educ. 2018;57(2):69-71.]. Copyright 2018, SLACK Incorporated.

Block 2 SRM conceptual design studies. Volume 1, Book 1: Conceptual design package

NASA Technical Reports Server (NTRS)

Smith, Brad; Williams, Neal; Miller, John; Ralston, Joe; Richardson, Jennifer; Moore, Walt; Doll, Dan; Maughan, Jeff; Hayes, Fred

1986-01-01

The conceptual design studies of a Block 2 Solid Rocket Motor (SRM) require the elimination of asbestos-filled insulation and was open to alternate designs, such as case changes, different propellants, modified burn rate - to improve reliability and performance. Limitations were placed on SRM changes such that the outside geometry should not impact the physical interfaces with other Space Shuttle elements and should have minimum changes to the aerodynamic and dynamic characteristics of the Space Shuttle vehicle. Previous Space Shuttle SRM experience was assessed and new design concepts combined to define a valid approach to assured flight success and economic operation of the STS. Trade studies, preliminary designs, analyses, plans, and cost estimates are documented.

A SAS-based solution to evaluate study design efficiency of phase I pediatric oncology trials via discrete event simulation.

PubMed

Barrett, Jeffrey S; Jayaraman, Bhuvana; Patel, Dimple; Skolnik, Jeffrey M

2008-06-01

Previous exploration of oncology study design efficiency has focused on Markov processes alone (probability-based events) without consideration for time dependencies. Barriers to study completion include time delays associated with patient accrual, inevaluability (IE), time to dose limiting toxicities (DLT) and administrative and review time. Discrete event simulation (DES) can incorporate probability-based assignment of DLT and IE frequency, correlated with cohort in the case of DLT, with time-based events defined by stochastic relationships. A SAS-based solution to examine study efficiency metrics and evaluate design modifications that would improve study efficiency is presented. Virtual patients are simulated with attributes defined from prior distributions of relevant patient characteristics. Study population datasets are read into SAS macros which select patients and enroll them into a study based on the specific design criteria if the study is open to enrollment. Waiting times, arrival times and time to study events are also sampled from prior distributions; post-processing of study simulations is provided within the decision macros and compared across designs in a separate post-processing algorithm. This solution is examined via comparison of the standard 3+3 decision rule relative to the "rolling 6" design, a newly proposed enrollment strategy for the phase I pediatric oncology setting.

The SNL100-03 Blade: Design Studies with Flatback Airfoils for the Sandia 100-meter Blade.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, Daniel; Richards, Phillip William

A series of design studies were performed to inv estigate the effects of flatback airfoils on blade performance and weight for large blades using the Sandi a 100-meter blade designs as a starting point. As part of the study, the effects of varying the blade slenderness on blade structural performance was investigated. The advantages and disadvantages of blad e slenderness with respect to tip deflection, flap- wise & edge-wise fatigue resistance, panel buckling capacity, flutter speed, manufacturing labor content, blade total weight, and aerodynamic design load magn itude are quantified. Following these design studies, a final blade design (SNL100-03) wasmore » prod uced, which was based on a highly slender design using flatback airfoils. The SNL100-03 design with flatback airfoils has weight of 49 tons, which is about 16% decrease from its SNL100-02 predecessor that used conventional sharp trailing edge airfoils. Although not systematically optimized, the SNL100 -03 design study provides an assessment of and insight into the benefits of flatback airfoils for la rge blades as well as insights into the limits or negative consequences of high blade slenderness resulting from a highly slender SNL100-03 planform as was chosen in the final design definition. This docum ent also provides a description of the final SNL100-03 design definition and is intended to be a companion document to the distribution of the NuMAD blade model files for SNL100-03, which are made publicly available. A summary of the major findings of the Sandia 100-meter blade development program, from the initial SNL100-00 baseline blade through the fourth SNL100-03 blade study, is provided. This summary includes the major findings and outcomes of blade d esign studies, pathways to mitigate the identified large blade design drivers, and tool development that were produced over the course of this five-year research program. A summary of large blade tec hnology needs and research opportunities is also presented.« less

Statistical inferences for data from studies conducted with an aggregated multivariate outcome-dependent sample design.

PubMed

Lu, Tsui-Shan; Longnecker, Matthew P; Zhou, Haibo

2017-03-15

Outcome-dependent sampling (ODS) scheme is a cost-effective sampling scheme where one observes the exposure with a probability that depends on the outcome. The well-known such design is the case-control design for binary response, the case-cohort design for the failure time data, and the general ODS design for a continuous response. While substantial work has been carried out for the univariate response case, statistical inference and design for the ODS with multivariate cases remain under-developed. Motivated by the need in biological studies for taking the advantage of the available responses for subjects in a cluster, we propose a multivariate outcome-dependent sampling (multivariate-ODS) design that is based on a general selection of the continuous responses within a cluster. The proposed inference procedure for the multivariate-ODS design is semiparametric where all the underlying distributions of covariates are modeled nonparametrically using the empirical likelihood methods. We show that the proposed estimator is consistent and developed the asymptotically normality properties. Simulation studies show that the proposed estimator is more efficient than the estimator obtained using only the simple-random-sample portion of the multivariate-ODS or the estimator from a simple random sample with the same sample size. The multivariate-ODS design together with the proposed estimator provides an approach to further improve study efficiency for a given fixed study budget. We illustrate the proposed design and estimator with an analysis of association of polychlorinated biphenyl exposure to hearing loss in children born to the Collaborative Perinatal Study. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

The impact of different climates on window and skylight design for daylighting and passive cooling and heating in residential buildings: A comparative study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Sallal, K.A.

1999-07-01

The study aims to explore the effect of different climates on window and skylight design in residential buildings. The study house is evaluated against climates that have design opportunities for passive systems, with emphasis on passive cooling. The study applies a variety of methods to evaluate the design. It has found that earth sheltering and night ventilation have the potential to provide 12--29% and 25--77% of the cooling requirements respectively for the study house in the selected climates. The reduction of the glazing area from 174 ft{sup 2} to 115 ft{sup 2} has different impacts on the cooling energy costmore » in the different climates. In climates such Fresno and Tucson, one should put the cooling energy savings as a priority for window design, particularly when determining the window size. In other climates such as Albuquerque, the priority of window design should be first given to heating savings requirements.« less

Seamless Phase IIa/IIb and enhanced dose-finding adaptive design.

PubMed

Yuan, Jiacheng; Pang, Herbert; Tong, Tiejun; Xi, Dong; Guo, Wenzhao; Mesenbrink, Peter

2016-01-01

In drug development, when the drug class has a relatively well-defined path to regulatory approval and the enrollment is slow with certain patient populations, one may want to consider combining studies of different phases. This article considers combining a proof of concept (POC) study and a dose-finding (DF) study with a control treatment. Conventional DF study designs sometimes are not efficient, or do not have a high probability to find the optimal dose(s) for Phase III trials. This article seeks more efficient DF strategies that allow the economical testing of more doses. Hypothetical examples are simulated to compare the proposed adaptive design vs. the conventional design based on different models of the overall quantitative representation of efficacy, safety, and tolerability. The results show that the proposed adaptive design tests more active doses with higher power and comparable or smaller sample size in a shorter overall study duration for POC and DF, compared with a conventional design.

Optimization of the intravenous glucose tolerance test in T2DM patients using optimal experimental design.

PubMed

Silber, Hanna E; Nyberg, Joakim; Hooker, Andrew C; Karlsson, Mats O

2009-06-01

Intravenous glucose tolerance test (IVGTT) provocations are informative, but complex and laborious, for studying the glucose-insulin system. The objective of this study was to evaluate, through optimal design methodology, the possibilities of more informative and/or less laborious study design of the insulin modified IVGTT in type 2 diabetic patients. A previously developed model for glucose and insulin regulation was implemented in the optimal design software PopED 2.0. The following aspects of the study design of the insulin modified IVGTT were evaluated; (1) glucose dose, (2) insulin infusion, (3) combination of (1) and (2), (4) sampling times, (5) exclusion of labeled glucose. Constraints were incorporated to avoid prolonged hyper- and/or hypoglycemia and a reduced design was used to decrease run times. Design efficiency was calculated as a measure of the improvement with an optimal design compared to the basic design. The results showed that the design of the insulin modified IVGTT could be substantially improved by the use of an optimized design compared to the standard design and that it was possible to use a reduced number of samples. Optimization of sample times gave the largest improvement followed by insulin dose. The results further showed that it was possible to reduce the total sample time with only a minor loss in efficiency. Simulations confirmed the predictions from PopED. The predicted uncertainty of parameter estimates (CV) was low in all tested cases, despite the reduction in the number of samples/subject. The best design had a predicted average CV of parameter estimates of 19.5%. We conclude that improvement can be made to the design of the insulin modified IVGTT and that the most important design factor was the placement of sample times followed by the use of an optimal insulin dose. This paper illustrates how complex provocation experiments can be improved by sequential modeling and optimal design.

On the Difficulties of Concurrent-System Design, Illustrated with a 2×2 Switch Case Study

NASA Astrophysics Data System (ADS)

Daylight, Edgar G.; Shukla, Sandeep K.

While various specification languages for concurrent-system design exist today, it is often not clear which specification language is more suitable than another for a particular case study. To address this problem, we study four different specification languages for the same 2×2 Switch case study: TLA + , Bluespec, Statecharts, and the Algebra of Communicating Processes (ACP). By slightly altering the design intent of the Switch, we obtain more complicated behaviors of the Switch. For each design intent, we investigate how each specification, in each of the specification languages, captures the corresponding behavior. By using three different criteria, we judge each specification and specification language. For our case study, however, all four specification languages perform poorly in at least two criteria! Hence, this paper illustrates, on a seemingly simple case study, some of the prevailing difficulties of concurrent-system design.

RIPOSTE: a framework for improving the design and analysis of laboratory-based research.

PubMed

Masca, Nicholas Gd; Hensor, Elizabeth Ma; Cornelius, Victoria R; Buffa, Francesca M; Marriott, Helen M; Eales, James M; Messenger, Michael P; Anderson, Amy E; Boot, Chris; Bunce, Catey; Goldin, Robert D; Harris, Jessica; Hinchliffe, Rod F; Junaid, Hiba; Kingston, Shaun; Martin-Ruiz, Carmen; Nelson, Christopher P; Peacock, Janet; Seed, Paul T; Shinkins, Bethany; Staples, Karl J; Toombs, Jamie; Wright, Adam Ka; Teare, M Dawn

2015-05-07

Lack of reproducibility is an ongoing problem in some areas of the biomedical sciences. Poor experimental design and a failure to engage with experienced statisticians at key stages in the design and analysis of experiments are two factors that contribute to this problem. The RIPOSTE (Reducing IrreProducibility in labOratory STudiEs) framework has been developed to support early and regular discussions between scientists and statisticians in order to improve the design, conduct and analysis of laboratory studies and, therefore, to reduce irreproducibility. This framework is intended for use during the early stages of a research project, when specific questions or hypotheses are proposed. The essential points within the framework are explained and illustrated using three examples (a medical equipment test, a macrophage study and a gene expression study). Sound study design minimises the possibility of bias being introduced into experiments and leads to higher quality research with more reproducible results.

Educating Instructional Designers: Different Methods for Different Outcomes.

ERIC Educational Resources Information Center

Rowland, Gordon; And Others

1994-01-01

Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

Teaching science to 8th graders by engaging them in a design and technology activity: A case study

NASA Astrophysics Data System (ADS)

Sidawi, Mai M.

This study described how students can apply science concepts to a Design and Technology task. It also examined whether the students could transfer their scientific knowledge to their design of technology. The study was conducted at an urban school in Philadelphia where a sample of 36 eighth grade students were taught a science unit, Energy, Machines, and Motion, and engaged in a technology design task that was chosen based on the scientific content of the unit. Two approaches of relating teaching science to technological design were observed and described. Through the first approach, the students were given technology lessons in addition to their science lessons. This was to provide them with the technological knowledge that they needed in designing technology such as learning about the design process, selection of appropriate materials, and selection of appropriate tools and how to use them. Also, the students were taught the social skills that will enable them to develop an effective collaborative relationship with their peers such as conflict-management and brainstorming. Through the second approach, the students were taught the science unit and then at the end of the unit the students were given the design task as an assessment of their scientific knowledge. The students' experience of designing technology for each approach was described. The study was conducted using multiple tools and instruments such as observation, videotaping, interviews, and testing. The students were also given the survey PATT-USA to measure their attitude toward technology. The study showed that the students' learning of science was impacted by their weak prerequisite knowledge in science, their poor verbal and written communication skills and their style as dependent learners. Also, the study showed the great impact of the school and classroom cultures on the participation of the students in a Design and Technology activity. The students in this study showed great resistant to participating in a Design and Technology activity. The study linked that to the culture of the classroom where the technology period was considered by the students a period of "free time" to be spent mainly on the computer, playing educational games or engaged in short term, non-demanding projects.

A systematic review of the use of an expertise-based randomised controlled trial design.

PubMed

Cook, Jonathan A; Elders, Andrew; Boachie, Charles; Bassinga, Ted; Fraser, Cynthia; Altman, Doug G; Boutron, Isabelle; Ramsay, Craig R; MacLennan, Graeme S

2015-05-30

Under a conventional two-arm randomised trial design, participants are allocated to an intervention and participating health professionals are expected to deliver both interventions. However, health professionals often have differing levels of expertise in a skill-based interventions such as surgery or psychotherapy. An expertise-based approach to trial design, where health professionals only deliver an intervention in which they have expertise, has been proposed as an alternative. The aim of this project was to systematically review the use of an expertise-based trial design in the medical literature. We carried out a comprehensive search of nine databases--AMED, BIOSIS, CENTRAL, CINAHL, Cochrane Methodology Register, EMBASE, MEDLINE, Science Citation Index, and PsycINFO--from 1966 to 2012 and performed citation searches using the ISI Citation Indexes and Scopus. Studies that used an expertise-based trial design were included. Two review authors independently screened the titles and abstracts and assessed full-text reports. Data were extracted and summarised on the study characteristics, general and expertise-specific study methodology, and conduct. In total, 7476 titles and abstracts were identified, leading to 43 included studies (54 articles). The vast majority (88%) used a pure expertise-based design; three (7%) adopted a hybrid design, and two (5%) used a design that was unclear. Most studies compared substantially different interventions (79%). In many cases, key information relating to the expertise-based design was absent; only 12 (28%) reported criteria for delivering both interventions. Most studies recruited the target sample size or very close to it (median of 101, interquartile range of 94 to 118), although the target was reported for only 40% of studies. The proportion of participants who received the allocated intervention was high (92%, interquartile range of 82 to 99%). While use of an expertise-based trial design is growing, it remains uncommon. Reporting of study methodology and, particularly, expertise-related methodology was poor. Empirical evidence provided some support for purported benefits such as high levels of recruitment and compliance with allocation. An expertise-based trial design should be considered but its value seems context-specific, particularly when interventions differ substantially or interventions are typically delivered by different health professionals.

Research Design Options for Intervention Studies.

PubMed

Lobo, Michele A; Kagan, Sarah H; Corrigan, John D

2017-07-01

To review research designs for rehabilitation. Single-case, observational, and qualitative designs are highlighted in terms of recent advances and ability to answer important scientific questions about rehabilitation. Single-case, observational, and qualitative designs can be conducted in a systematic and rigorous manner that provides important information that cannot be acquired using more common designs, such as randomized controlled trials. These less commonly used designs may be more feasible and effective in answering many research questions in the field of rehabilitation. Researchers should consider these designs when selecting the optimal design to answer their research questions. We should improve education about the advantages and disadvantages of existing research designs to enable more critical analysis of the scientific literature we read and review to avoid undervaluing studies not within more commonly used categories.

Ergonomic study and static analysis for new design of electric scooter

NASA Astrophysics Data System (ADS)

Fadzly, M. K.; Munirah, Anis; Shayfull, Z.; Saad, Mohd Sazli

2017-09-01

The purposes of this project are to design and diversify the function of a battery powered scooter frame which is more practical for the human factor in ergonomic and optimum design. The new design is based on ideas which are studied from existing scooter frame, United States Patent design and European States International Patent design. The final idea of concept design for scooter frame is based on concept chosen from the best characteristics and it is divided into three main difference ideas and the matrix evaluation method is applied. Analysis that applies to frame design, arm, rim and drive train component is based on Cosmos Express program. As a conclusion, the design that is produce are able to carry the maximum also has more practical features in ergonomic view.

Design and analysis of wudu’ (ablution) workstation for elderly in Malaysia

NASA Astrophysics Data System (ADS)

Aman, A.; Dawal, S. Z. M.; Rahman, N. I. A.

2017-06-01

Wudu’ (Ablution) workstation is one of the facilities used by most Muslims in all categories. At present, there are numbers of design guidelines for praying facilities but still lacking on wudu’ (ablution) area specification especially or elderly. Thus, It is timely to develop an ergonomic wudu’ workstation for elderly to perform ablution independently and confidently. This study was conducted to design an ergonomic ablution unit for the Muslim’s elderly in Malaysia. An ablution workstation was designed based on elderly anthropometric dimensions and was then analyse using CATIA V5R21 for posture investigation using RULAs. The results of the study has identified significant anthropometric dimensions in designing wudu’ (ablution) workstation for elderly people. This study can be considered as preliminary study for the development of an ergonomic ablution design for elderly. This effort will become one of the significant social contributions to our elderly population in developing our nation holistically.

Information management system study results. Volume 1: IMS study results

NASA Technical Reports Server (NTRS)

1971-01-01

The information management system (IMS) special emphasis task was performed as an adjunct to the modular space station study, with the objective of providing extended depth of analysis and design in selected key areas of the information management system. Specific objectives included: (1) in-depth studies of IMS requirements and design approaches; (2) design and fabricate breadboard hardware for demonstration and verification of design concepts; (3) provide a technological base to identify potential design problems and influence long range planning (4) develop hardware and techniques to permit long duration, low cost, manned space operations; (5) support SR&T areas where techniques or equipment are considered inadequate; and (6) permit an overall understanding of the IMS as an integrated component of the space station.

Vestibular Function Research (VFR) experiment. Phase B: Design definition study

NASA Technical Reports Server (NTRS)

1978-01-01

The Vestibular Functions Research (VFR) Experiment was established to investigate the neurosensory and related physiological processes believed to be associated with the space flight nausea syndrome and to develop logical means for its prediction, prevention and treatment. The VFR Project consists of ground and spaceflight experimentation using frogs as specimens. The phase B Preliminary Design Study provided for the preliminary design of the experiment hardware, preparation of performance and hardware specification and a Phase C/D development plan, establishment of STS (Space Transportation System) interfaces and mission operations, and the study of a variety of hardware, experiment and mission options. The study consist of three major tasks: (1) mission mode trade-off; (2) conceptual design; and (3) preliminary design.

A Charge Separation Study to Enable the Design of a Complete Muon Cooling Channel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshikawa, C.; Ankenbrandt, Charles M.; Johnson, Rolland P.

2013-12-01

The most promising designs for 6D muon cooling channels operate on a specific sign of electric charge. In particular, the Helical Cooling Channel (HCC) and Rectilinear RFOFO designs are the leading candidates to become the baseline 6D cooling channel in the Muon Accelerator Program (MAP). Time constraints prevented the design of a realistic charge separator, so a simplified study was performed to emulate the effects of charge separation on muons exiting the front end of a muon collider. The output of the study provides particle distributions that the competing designs will use as input into their cooling channels. We reportmore » here on the study of the charge separator that created the simulated particles.« less

Design and analysis of post-marketing research.

PubMed

Zhou, Xiao-Hua Andrew; Yang, Wei

2013-07-01

A post-marketing study is an integral part of research that helps to ensure a favorable risk-benefit profile for approved drugs used in the market. Because most of post-marketing studies use observational designs, which are liable to confounding, estimation of the causal effect of a drug versus a comparative one is very challenging. This article focuses on methodological issues of importance in designing and analyzing studies to evaluate the safety of marketed drugs, especially marketed traditional Chinese medicine (TCM) products. Advantages and limitations of the current designs and analytic methods for postmarketing studies are discussed, and recommendations are given for improving the validity of postmarketing studies in TCM products.

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 1: Executive summary. Phase A: Conceptual design and programmatics

NASA Technical Reports Server (NTRS)

1985-01-01

The study was conducted in 3 parts over a 3 year period. The study schedule and the documentation associated with each study part is given. This document summarized selected study results from the conceptual design and programmatics segment of the effort. The objectives were: (1) to update requirements and tradeoffs and develop a detailed design and mission requirements document; (2) to develop conceptual designs and mission descriptions; and (3) to develop programmatic, i.e., work breakdown structure and work breakdown structure dictionary, estimated cost, and implementing plans and schedules.

76 FR 23608 - Revision to Proposed Collection; Comment Request; Formative Research Methodology Studies for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... conduct survey and instrument design and administration, focus groups, cognitive interviews, and health..., recruitment, consent and questionnaire design, and retention activities. Under separate notice, the NCS also... study of this size and complexity, the NCS was designed to include a preliminary pilot study known as...

76 FR 23605 - New Proposed Collection; Comment Request; Study Logistic Formative Research Methodology Studies...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... formative research relating to instrument design and modality with a view to reduce item and unit non... clearance to conduct survey and instrument design and administration, focus groups, cognitive interviews... conduct the detailed preparation needed for a study of this size and complexity, the NCS was designed to...

Standards of Multimedia Graphic Design in Education

ERIC Educational Resources Information Center

Aldalalah, Osamah Ahmad; Ababneh, Ziad Waleed Mohamed

2015-01-01

This study aims to determine Standards of Multimedia Graphic Design in Education through the analysis of the theoretical basis and previous studies related to this subject. This study has identified the list of standards of Multimedia, Graphic Design, each of which has a set indicator through which the quality of Multimedia can be evaluated in…

Design Study: Integer Subtraction Operation Teaching Learning Using Multimedia in Primary School

ERIC Educational Resources Information Center

Aris, Rendi Muhammad; Putri, Ratu Ilma Indra

2017-01-01

This study aims to develop a learning trajectory to help students understand concept of subtraction of integers using multimedia in the fourth grade. This study is thematic integrative learning in Curriculum 2013 PMRI based. The method used is design research consists of three stages; preparing for the experiment, design experiment, retrospective…

Interior Design Supports Art Education: A Case Study

ERIC Educational Resources Information Center

Clemons, Stephanie A.

2006-01-01

Interior design, as a field of study, is a rapidly growing area of interest--particularly for teenagers in the United States. Part of this interest stems from the proliferation of design-related reality shows available through television media. Some art educators and curriculum specialists in the nation perceive the study of interior spaces as a…

Teachers' Cooperative Design of Instruction with Media for Social and Environmental Studies.

ERIC Educational Resources Information Center

Saga, Hiroo

This study examines how a group of Japanese teachers cooperatively designed lessons using a television program and other materials for social and environmental studies. Teachers started the design by identifying their aims of instruction through examining the contents of an educational television program. This program described how a group of…

Children as Educational Computer Game Designers: An Exploratory Study

ERIC Educational Resources Information Center

Baytak, Ahmet; Land, Susan M.; Smith, Brian K.

2011-01-01

This study investigated how children designed computer games as artifacts that reflected their understanding of nutrition. Ten 5th grade students were asked to design computer games with the software "Game Maker" for the purpose of teaching 1st graders about nutrition. The results from the case study show that students were able to…

Should Intelligent Design Be Taught in Social Studies Courses?

ERIC Educational Resources Information Center

Hess, Diana E.

2006-01-01

In this article, the author examines whether the very reasons that explain why intelligent design is controversial in the science curriculum also apply to social studies. She reports what teachers at a recent democratic education conference said about four different lessons on intelligent design that could fit into social studies courses. She…

[Strengthening the methodology of study designs in scientific researches].

PubMed

Ren, Ze-qin

2010-06-01

Many problems in study designs have affected the validity of scientific researches seriously. We must understand the methodology of research, especially clinical epidemiology and biostatistics, and recognize the urgency in selection and implement of right study design. Thereafter we can promote the research capability and improve the overall quality of scientific researches.

Multimodal Design for Secondary English Language Arts: A Portraiture Study

ERIC Educational Resources Information Center

Price, Cecelia Joyce

2017-01-01

Employing the research approach known as portraiture, this study investigated the varying ways in which three secondary English language arts teachers at a visual and performing arts high school conceptualized and designed multimodal literacy learning. Also studied were the ways in which their students responded to these designs; and in keeping…

Prevalence of Mixed-Methods Sampling Designs in Social Science Research

ERIC Educational Resources Information Center

Collins, Kathleen M. T.

2006-01-01

The purpose of this mixed-methods study was to document the prevalence of sampling designs utilised in mixed-methods research and to examine the interpretive consistency between interpretations made in mixed-methods studies and the sampling design used. Classification of studies was based on a two-dimensional mixed-methods sampling model. This…

75 FR 47592 - Final Test Guideline; Product Performance of Skin-applied Insect Repellents of Insect and Other...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... considerations affecting the design and conduct of repellent studies when human subjects are involved. Any... recommendations for the design and execution of studies to evaluate the performance of pesticide products intended... recommends appropriate study designs and methods for selecting subjects, statistical analysis, and reporting...

Content Analysis of Research Trends in Instructional Design Models: 1999-2014

ERIC Educational Resources Information Center

Göksu, Idris; Özcan, Kursat Volkan; Çakir, Recep; Göktas, Yuksel

2017-01-01

This study examines studies on instructional design models by applying content analysis. It covers 113 papers published in 44 international Social Science Citation Index (SSCI) and Science Citation Index (SCI) journals. Studies on instructional design models are explored in terms of journal of publication, preferred model, country where the study…

A Mission Concept to Study Multigenerational Mammalian Reproduction in Partial Gravity

NASA Technical Reports Server (NTRS)

Rodgers, Erica M.; Simon, Matthew A.; Chai, Patrick R.; Neilan, James H.; Stillwagen, Fred H.; Williams, Phillip A.; Lewis, Weston

2016-01-01

A team at NASA Langley Research Center conducted a study during which a conceptual space mission was designed. In this study, rodents are used as human analogs to gather biological and systems data in a relevant environment applicable to future settlements on Mars. The mission concept uniquely addresses the combined effects of long-durations (one-year or greater), autonomous and robotic operations, and biological responses to partial gravity with an emphasis on reproduction. The objectives of this study were to 1) understand challenges associated with designing an artificial gravity habitat that supports the reproduction and maturation of a large animal colony, 2) identify mission architectures and operational concepts to transport and maintain such a facility, and 3) identify fundamental science considerations for mammalian reproduction studies to inform vehicle design. A model demonstration unit was developed to visualize and test certain design concepts that resulted from these considerations. Three versions of this demonstration unit were built over the course of the study, each taking into account lessons learned from the previous version. This paper presents the updated baseline mission and spacecraft design concepts to achieve these objectives, with a specific emphasis on updates since publication in previous works. Analyses of the integrated system trades among the elements which make up the conceptual vehicle are described to address overall feasibility and identify potential integrated design opportunities. The latest iteration of the habitat robotics design and a conceptual design example for autonomous care of crew and systems are also presented. Finally, the conclusion of this conceptual design study, necessary future analyses to enable such a facility, and comments upon other applications of a similar exploration-focused research facilities are addressed.

Associations of daily pediatric asthma emergency department visits with air pollution in Newark, NJ: utilizing time-series and case-crossover study designs.

PubMed

Gleason, Jessie A; Fagliano, Jerald A

2015-10-01

Asthma is one of the most common chronic diseases affecting children. This study assesses the associations of ozone and fine particulate matter (PM2.5) with pediatric emergency department visits in the urban environment of Newark, NJ. Two study designs were utilized and evaluated for usability. We obtained daily emergency department visits among children aged 3-17 years with a primary diagnosis of asthma during April to September for 2004-2007. Both a time-stratified case-crossover study design with bi-directional control sampling and a time-series study design were utilized. Lagged effects (1-d through 5-d lag, 3-d average, and 5-d average) of ozone and PM2.5 were explored and a dose-response analysis comparing the bottom 5th percentile of 3-d average lag ozone with each 5 percentile increase was performed. Associations of interquartile range increase in same-day ozone were similar between the time-series and case-crossover study designs (RR = 1.08, 95% CI 1.04-1.12) and (OR = 1.10, 95% CI 1.06-1.14), respectively. Similar associations were seen for 1-day lag and 3-day average lag ozone levels. PM2.5 was not associated with the outcome in either study design. Dose-response assessment indicated a statistically significant and increasing association around 50-55 ppb consistent for both study designs. Ozone was statistically positively associated with pediatric asthma ED visits in Newark, NJ. Our results were generally comparable across the time-series and case-crossover study designs, indicating both are useful to assess local air pollution impacts.

ANALYSIS OF DESIGN RANGE FOR A STROKING SEAT ON A STROKING FLOOR TO MITIGATE BLAST LOADING EFFECTS

DTIC Science & Technology

2017-05-16

and the optimal design points that can mitigate the occupant injury to a range of input parameters. One key conclusion from the study is that blast...stroking) in another case . The results from this study are shown in Figure 10. The original two baseline design points explored in the previous...this study , occupant is positioned with feet on the foot-rest attached to the seat system. However, a particular vehicle design may have the

Solid propellant grain design and internal ballistics

NASA Technical Reports Server (NTRS)

1972-01-01

The ballistic aspects of grain design were studied to outline the steps necessary to achieve a successful grain design. The relationships of the grain design to steady-state mass balance and erosive burning are considered. Grain design criteria is reviewed, and recommended design criteria are included.

Color associations among designers and non-designers for common warning and operation concepts.

PubMed

Ng, Annie W Y; Chan, Alan H S

2018-07-01

This study examined color-concept associations among designers and non-designers with commonly used warning and operation concepts. This study required 199 designers and 175 non-designers to indicate their choice among nine colors to associate with each of the 38 concepts in a color-concept table. The results showed that the designers and non-designers had the same color associations and similar strengths of stereotypes for 17 concepts. The strongest color-concept stereotypes for both groups were red-danger, red-fire, and red-hot. However, the designers and non-designers had different color associations for the concepts of escape (green, red), increase (green, red), potential hazard (red, orange), fatal (black, red), and normal (white, green), while the strengths of the 16 remaining associations for both groups were not at equivalent levels. These findings provide ergonomists and design practitioners with a better understanding of population stereotypes for color coding, and consequently to effectively use colors in their user-centered designs. Copyright © 2018 Elsevier Ltd. All rights reserved.

Exploring Pupils' Beliefs about Designers and Designing

ERIC Educational Resources Information Center

Trebell, Donna

2011-01-01

The purpose of this paper is to report on an investigation into pupil beliefs about designers and designing conducted as part of a research project focusing on Designerly Activity in Secondary Design and Technology which builds upon a pilot study (Barlex and Trebell in "Int J Technol Design Educ," 2007). Four research questions drove this element…

[Not Available].

PubMed

Paturzo, Marco; Colaceci, Sofia; Clari, Marco; Mottola, Antonella; Alvaro, Rosaria; Vellone, Ercole

2016-01-01

. Mixed methods designs: an innovative methodological approach for nursing research. The mixed method research designs (MM) combine qualitative and quantitative approaches in the research process, in a single study or series of studies. Their use can provide a wider understanding of multifaceted phenomena. This article presents a general overview of the structure and design of MM to spread this approach in the Italian nursing research community. The MM designs most commonly used in the nursing field are the convergent parallel design, the sequential explanatory design, the exploratory sequential design and the embedded design. For each method a research example is presented. The use of MM can be an added value to improve clinical practices as, through the integration of qualitative and quantitative methods, researchers can better assess complex phenomena typical of nursing.

Effects of Buckling Knockdown Factor, Internal Pressure and Material on the Design of Stiffened Cylinders

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Hilburger, Mark W.; Chunchu, Prasad B.

2010-01-01

A design study was conducted to investigate the effect shell buckling knockdown factor (SBKF), internal pressure and aluminum alloy material selection on the structural weight of stiffened cylindrical shells. Two structural optimization codes were used for the design study to determine the optimum minimum-weight design for a series of design cases, and included an in-house developed genetic algorithm (GA) code and PANDA2. Each design case specified a unique set of geometry, material, knockdown factor combinations and loads. The resulting designs were examined and compared to determine the effects of SBKF, internal pressure and material selection on the acreage design weight and controlling failure mode. This design study shows that use of less conservative SBKF values, including internal pressure, and proper selection of material alloy can result in significant weight savings for stiffened cylinders. In particular, buckling-critical cylinders with integrally machined stiffener construction can benefit from the use of thicker plate material that enables taller stiffeners, even when the stiffness, strength and density properties of these materials appear to be inferior.

Multiqubit Clifford groups are unitary 3-designs

NASA Astrophysics Data System (ADS)

Zhu, Huangjun

2017-12-01

Unitary t -designs are a ubiquitous tool in many research areas, including randomized benchmarking, quantum process tomography, and scrambling. Despite the intensive efforts of many researchers, little is known about unitary t -designs with t ≥3 in the literature. We show that the multiqubit Clifford group in any even prime-power dimension is not only a unitary 2-design, but also a 3-design. Moreover, it is a minimal 3-design except for dimension 4. As an immediate consequence, any orbit of pure states of the multiqubit Clifford group forms a complex projective 3-design; in particular, the set of stabilizer states forms a 3-design. In addition, our study is helpful in studying higher moments of the Clifford group, which are useful in many research areas ranging from quantum information science to signal processing. Furthermore, we reveal a surprising connection between unitary 3-designs and the physics of discrete phase spaces and thereby offer a simple explanation of why no discrete Wigner function is covariant with respect to the multiqubit Clifford group, which is of intrinsic interest in studying quantum computation.

[Establishment of design space for production process of traditional Chinese medicine preparation].

PubMed

Xu, Bing; Shi, Xin-Yuan; Qiao, Yan-Jiang; Wu, Zhi-Sheng; Lin, Zhao-Zhou

2013-03-01

The philosophy of quality by design (QbD) is now leading the changes in the drug manufacturing mode from the conventional test-based approach to the science and risk based approach focusing on the detailed research and understanding of the production process. Along with the constant deepening of the understanding of the manufacturing process, the design space will be determined, and the emphasis of quality control will be shifted from the quality standards to the design space. Therefore, the establishment of the design space is core step in the implementation of QbD, and it is of great importance to study the methods for building the design space. This essay proposes the concept of design space for the production process of traditional Chinese medicine (TCM) preparations, gives a systematic introduction of the concept of the design space, analyzes the feasibility and significance to build the design space in the production process of traditional Chinese medicine preparations, and proposes study approaches on the basis of examples that comply with the characteristics of traditional Chinese medicine preparations, as well as future study orientations.

Tactical Approaches for Trading Science Objectives Against Measurements and Mission Design: Science Traceability Techniques at the Jet Propulsion Laboratory

NASA Astrophysics Data System (ADS)

Nash, A. E., III

2017-12-01

The most common approaches to identifying the most effective mission design to maximize science return from a potential set of competing alternative design approaches are often inefficient and inaccurate. Recently, Team-X at the Jet Propulsion Laboratory undertook an effort to improve both the speed and quality of science - measurement - mission design trade studies. We will report on the methodology & processes employed and their effectiveness in trade study speed and quality. Our results indicate that facilitated subject matter expert peers are the keys to speed and quality improvements in the effectiveness of science - measurement - mission design trade studies.

Magnetic suspension and balance system advanced study, 1989 design

NASA Technical Reports Server (NTRS)

Boom, Roger W.; Eyssa, Y. M.; Abdelsalam, Moustafa K.; Mcintosh, Glen E.

1991-01-01

The objectives are to experimentally confirm several advanced design concepts on the Magnetic Suspension and Balance Systems (MSBS). The advanced design concepts were identified as potential improvements by Madison Magnetics, Inc. (MMI) during 1984 and 1985 studies of an MSBS utilizing 14 external superconductive coils and a superconductive solenoid in an airplane test model suspended in a wind tunnel. This study confirmed several advanced design concepts on magnetic suspension and balance systems. The 1989 MSBS redesign is based on the results of these experiments. Savings of up to 30 percent in supporting magnet ampere meters and 50 percent in energy stored over the 1985 design were achieved.

An Exploratory Study of Self-Regulated Learning Strategies in a Design Project by Students in Grades 9-12

ERIC Educational Resources Information Center

Lawanto, Oenardi; Butler, Deborah; Cartier, Sylvie; Santoso, Harry; Lawanto, Kevin; Clark, David

2013-01-01

This exploratory study evaluated self-regulated learning (SRL) strategies of 27 students in grades 9-12 during an engineering design project. The specific focus of the study was on student task interpretation and its relation to planning and cognitive strategies in design activities. Two research questions guided the study: (1) To what degree was…

The Role of Transfer in Designing Games and Simulations for Health: Systematic Review.

PubMed

Kuipers, Derek A; Terlouw, Gijs; Wartena, Bard O; van 't Veer, Job Tb; Prins, Jelle T; Pierie, Jean Pierre En

2017-11-24

The usefulness and importance of serious games and simulations in learning and behavior change for health and health-related issues are widely recognized. Studies have addressed games and simulations as interventions, mostly in comparison with their analog counterparts. Numerous complex design choices have to be made with serious games and simulations for health, including choices that directly contribute to the effects of the intervention. One of these decisions is the way an intervention is expected to lead to desirable transfer effects. Most designs adopt a first-class transfer rationale, whereas the second class of transfer types seems a rarity in serious games and simulations for health. This study sought to review the literature specifically on the second class of transfer types in the design of serious games and simulations. Focusing on game-like interventions for health and health care, this study aimed to (1) determine whether the second class of transfer is recognized as a road for transfer in game-like interventions, (2) review the application of the second class of transfer type in designing game-like interventions, and (3) assess studies that include second-class transfer types reporting transfer outcomes. A total of 6 Web-based databases were systematically searched by titles, abstracts, and keywords using the search strategy (video games OR game OR games OR gaming OR computer simulation*) AND (software design OR design) AND (fidelity OR fidelities OR transfer* OR behaviour OR behavior). The databases searched were identified as relevant to health, education, and social science. A total of 15 relevant studies were included, covering a range of game-like interventions, all more or less mentioning design parameters aimed at transfer. We found 9 studies where first-class transfer was part of the design of the intervention. In total, 8 studies dealt with transfer concepts and fidelity types in game-like intervention design in general; 3 studies dealt with the concept of second-class transfer types and reported effects, and 2 of those recognized transfer as a design parameter. In studies on game-like interventions for health and health care, transfer is regarded as a desirable effect but not as a basic principle for design. None of the studies determined the second class of transfer or instances thereof, although in 3 cases a nonliteral transfer type was present. We also found that studies on game-like interventions for health do not elucidate design choices made and rarely provide design principles for future work. Games and simulations for health abundantly build upon the principles of first-class transfer, but the adoption of second-class transfer types proves scarce. It is likely to be worthwhile to explore the possibilities of second-class transfer types, as they may considerably influence educational objectives in terms of future serious game design for health. ©Derek A Kuipers, Gijs Terlouw, Bard O Wartena, Job TB van 't Veer, Jelle T Prins, Jean Pierre EN Pierie. Originally published in JMIR Serious Games (http://games.jmir.org), 24.11.2017.

Designing Measurement Studies under Budget Constraints: Controlling Error of Measurement and Power.

ERIC Educational Resources Information Center

Marcoulides, George A.

1995-01-01

A methodology is presented for minimizing the mean error variance-covariance component in studies with resource constraints. The method is illustrated using a one-facet multivariate design. Extensions to other designs are discussed. (SLD)

Phase A design study of microgravity fluoride fiber puller

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Smith, Guy A.; Kosten, Susan

1994-01-01

Improved transmission properties for fluoride fibers due to space processing has great potential for commercial benefits. Phase A design study will determine conceptual feasibility and provide initial definition of the technical requirements and design issues for space.

Technical and Economic Evaluation of Advanced Air Cargo Systems

NASA Technical Reports Server (NTRS)

Whitehead, A. H., Jr.

1978-01-01

The current air cargo environment and the relevance of advanced technology aircraft in enhancing the efficiency of the 1990 air cargo system are discussed. NASA preliminary design studies are shown to indicate significant potential gains in aircraft efficiency and operational economics for future freighter concepts. Required research and technology elements are outlined to develop a better base for evaluating advanced design concepts. Current studies of the market operation are reviewed which will develop design criteria for a future dedicated cargo transport. Design features desirable in an all-freighter design are reviewed. NASA-sponsored studies of large, distributed-load freighters are reviewed and these designs are compared to current wide-body aircraft. These concepts vary in gross takeoff weight from 0.5 Gg (one million lbs.) to 1.5 Gg (three million lbs.) and are found to exhibit economic advantages over conventional design concepts.

Study unique artistic lopburi province for design brass tea set of bantahkrayang community

NASA Astrophysics Data System (ADS)

Pliansiri, V.; Seviset, S.

2017-07-01

The objectives of this study were as follows: 1) to study the production process of handcrafted Brass Tea Set; and 2) to design and develop the handcrafted of Brass Tea Set. The process of design was started by mutual analytical processes and conceptual framework for product design, Quality Function Deployment, Theory of Inventive Problem Solving, Principles of Craft Design, and Principle of Reverse Engineering. The experts in field of both Industrial Product Design and Brass Handicraft Product, have evaluated the Brass Tea Set design and created prototype of Brass tea set by the sample of consumers who have ever bought the Brass Tea Set of Bantahkrayang Community on this research. The statistics methods used were percentage, mean ({{{\\overline X}} = }) and standard deviation (S.D.) 3. To assess consumer satisfaction toward of handcrafted Brass tea set was at the high level.

Testing a tool for the classification of study designs in systematic reviews of interventions and exposures showed moderate reliability and low accuracy.

PubMed

Hartling, Lisa; Bond, Kenneth; Santaguida, P Lina; Viswanathan, Meera; Dryden, Donna M

2011-08-01

To develop and test a study design classification tool. We contacted relevant organizations and individuals to identify tools used to classify study designs and ranked these using predefined criteria. The highest ranked tool was a design algorithm developed, but no longer advocated, by the Cochrane Non-Randomized Studies Methods Group; this was modified to include additional study designs and decision points. We developed a reference classification for 30 studies; 6 testers applied the tool to these studies. Interrater reliability (Fleiss' κ) and accuracy against the reference classification were assessed. The tool was further revised and retested. Initial reliability was fair among the testers (κ=0.26) and the reference standard raters κ=0.33). Testing after revisions showed improved reliability (κ=0.45, moderate agreement) with improved, but still low, accuracy. The most common disagreements were whether the study design was experimental (5 of 15 studies), and whether there was a comparison of any kind (4 of 15 studies). Agreement was higher among testers who had completed graduate level training versus those who had not. The moderate reliability and low accuracy may be because of lack of clarity and comprehensiveness of the tool, inadequate reporting of the studies, and variability in tester characteristics. The results may not be generalizable to all published studies, as the test studies were selected because they had posed challenges for previous reviewers with respect to their design classification. Application of such a tool should be accompanied by training, pilot testing, and context-specific decision rules. Copyright © 2011 Elsevier Inc. All rights reserved.

Ergonomic approach for pillow concept design.

PubMed

Cai, Dengchuan; Chen, Hsiao-Lin

2016-01-01

Sleep quality is an essential factor to human beings for health. The current paper conducted four studies to provide a suitable pillow for promoting sleep quality. Study 1 investigated the natural positions of 40 subjects during sleep to derive key-points for a pillow design. The results suggested that the supine and lateral positions were alternatively 24 times a night, and the current pillows were too high for the supine position and too low for lateral positions. Study 2 measured body dimensions related to pillow design of 40 subjects to determine pillow sizes. The results suggested that the pillow height were quite different in supine position and lateral position and needed to take into consideration for a pillow design. Study 3 created a pillow design based on the results of above studies. The pillow was a U-form in the front of view in which the pillow height in the middle area was lower for the supine position, and both sides were higher for the lateral positions. Study 4 assessed sleep quality of 6 subjects by using the proposed pillows and the current pillows. The results showed that the newly designed pillow led to significantly higher sleep quality, and the new design received an innovation patent. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Design of Phase II Clinical Trials Testing Cancer Therapeutics: Consensus Recommendations from the Clinical Trial Design Task Force of the National Cancer Institute Investigational Drug Steering Committee

PubMed Central

Seymour, Lesley; Ivy, S. Percy; Sargent, Daniel; Spriggs, David; Baker, Laurence; Rubinstein, Larry; Ratain, Mark J; Le Blanc, Michael; Stewart, David; Crowley, John; Groshen, Susan; Humphrey, Jeffrey S; West, Pamela; Berry, Donald

2010-01-01

The optimal design of phase II studies continues to be the subject of vigorous debate, especially with regards to studies of newer molecularly targeted agents. The observations that many new therapeutics ‘fail’ in definitive phase III studies, coupled with the numbers of new agents to be tested as well as the increasing costs and complexity of clinical trials further emphasizes the critical importance of robust and efficient phase II design. The Clinical Trial Design Task Force(CTD-TF)of the NCI Investigational Drug Steering Committee (IDSC) has published a series of discussion papers on Phase II trial design in Clinical Cancer Research. The IDSC has developed formal recommendations regarding aspects of phase II trial design which are the subject of frequent debate such as endpoints(response vs. progression free survival), randomization(single arm designs vs. randomization), inclusion of biomarkers, biomarker based patient enrichment strategies, and statistical design(e.g. two stage designs vs. multiple-group adaptive designs). While these recommendations in general encourage the use of progression-free survival as the primary endpoint, the use of randomization, the inclusion of biomarkers and the incorporation of newer designs, we acknowledge that objective response as an endpoint, and single arm designs, remain relevant in certain situations. The design of any clinical trial should always be carefully evaluated and justified based on the characteristic specific to the situation. PMID:20215557

The design briefing process matters: a case study on telehealthcare device providers in the UK.

PubMed

Yang, Fan; Renda, Gianni

2018-01-23

The telehealthcare sector has been expanding steadily in the UK. However, confusing, complex and unwieldy designs of telehealthcare devices are at best, less effective than they could be, at worst, they are potentially dangerous to the users. This study investigated the factors within the new product development process that hindered satisfactory product design outcomes, through working collaboratively with a leading provider based in the UK. This study identified that there are too many costly late-stage design changes; a critical and persistent problem area ripe for improvement. The findings from analyzing 30 recent devices, interviewing key stakeholders and observing on-going projects further revealed that one major cause of the issue was poor practice in defining and communicating the product design criteria and requirements. Addressing the characteristics of the telehealthcare industry, such as multiple design commissioners and frequent deployment of design subcontracts, this paper argues that undertaking a robust process of creating the product design brief is the key to improving the outcomes of telehealthcare device design, particularly for the small and medium-sized enterprises dominating the sector. Implications for rehabilitation Product design criteria and requirements are frequently ill-defined and ineffectively communicated to the designers within the processes of developing new telehealthcare devices. The absence of a (robust) process of creating the design brief is the root cause of the identified issues in defining and communicating the design task. Deploying a formal process of creating the product design brief is particularly important for the telehealthcare sector.

What Informs Practice and What Is Valued in Corporate Instructional Design? A Mixed Methods Study

ERIC Educational Resources Information Center

Thompson-Sellers, Ingrid N.

2012-01-01

This study used a two-phased explanatory mixed-methods design to explore in-depth what factors are perceived by Instructional Design and Technology (IDT) professionals as impacting instructional design practice, how these factors are valued in the field, and what differences in perspectives exist between IDT managers and non-managers. For phase 1…

(Re)Designing Writing in English Class: A Multimodal Approach to Teaching Writing

ERIC Educational Resources Information Center

Rowsell, Jennifer; Decoste, Eryn

2012-01-01

Based on a 2-year ethnographic study in an urban secondary school in Toronto, the article presents how a teacher and a researcher teach Grade 11 students through a design-based approach to teaching and learning in English class. Built on research and pedagogy on design, the authors designed a programme of study as an alternative to more…

A Case Study on Collective Cognition and Operation in Team-Based Computer Game Design by Middle-School Children

ERIC Educational Resources Information Center

Ke, Fengfeng; Im, Tami

2014-01-01

This case study examined team-based computer-game design efforts by children with diverse abilities to explore the nature of their collective design actions and cognitive processes. Ten teams of middle-school children, with a high percentage of minority students, participated in a 6-weeks, computer-assisted math-game-design program. Essential…

Shared Values as Anchors of a Learning Community: A Case Study in Information Systems Design

ERIC Educational Resources Information Center

Giordano, Daniela

2004-01-01

This paper examines the role in both individual and organizational learning of the system of values sustained by a community undertaking a design task. The discussion is based on the results of a longitudinal study of a community of novice information system designers supported by a Web-based shared design memory which allows reuse of design…

Inter-Creative Course Model Proposal: Teaching- Learning Design in Secondary Schools of TRNC

ERIC Educational Resources Information Center

Ulas-Dagli, Ugur; Pasaoglulari-Sahin, Nil; Güley, Kamil

2013-01-01

Problem Statement: Design is an indispensable part of the human being. It enters one's life on the very first day that the eyes open. Design awareness is developed at an early age. With a proper education, even in the preschool years, design is experienced within one's close environment. Purpose of the Study: This study aims to determine the…

Development of a Design-Based Learning Curriculum through Design-Based Research for a Technology-Enabled Science Classroom

ERIC Educational Resources Information Center

Kim, Paul; Suh, Esther; Song, Donggil

2015-01-01

This exploratory study provides a deeper look into the aspects of students' experience from design-based learning (DBL) activities for fifth grade students. Using design-based research (DBR), this study was conducted on a series of science learning activities leveraging mobile phones with relevant applications and sensors. We observed 3 different…

Orbit transfer vehicle advanced expander cycle engine point design study. Volume 2: Study results

NASA Technical Reports Server (NTRS)

Diem, H. G.

1980-01-01

The design characteristics of the baseline engine configuration of the advanced expander cycle engine are described. Several aspects of engine optimization are considered which directly impact the design of the baseline thrust chamber. Four major areas of the power cycle optimization are emphasized: main turbine arrangement; cycle engine source; high pressure pump design; and boost pump drive.

Neptune aerocapture mission and spacecraft design overview

NASA Technical Reports Server (NTRS)

Bailey, Robert W.; Hall, Jeff L.; Spliker, Tom R.; O'Kongo, Nora

2004-01-01

A detailed Neptune aerocapture systems analysis and spacecraft design study was performed as part of NASA's In-Space Propulsion Program. The primary objectives were to assess the feasibility of a spacecraft point design for a Neptune/Triton science mission. That uses aerocapture as the Neptune orbit insertion mechanism. This paper provides an overview of the science, mission and spacecraft design resulting from that study.